733 files changed, 257251 insertions, 0 deletions

diff --git a/src/vendorcode/amd/agesa/Makefile.inc b/src/vendorcode/amd/agesa/Makefile.inc
index 5516888d19..b0e5ddf66f 100644
--- a/src/vendorcode/amd/agesa/Makefile.inc
+++ b/src/vendorcode/amd/agesa/Makefile.inc
@@ -1,3 +1,4 @@
 subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY10) += f10
 subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY12) += f12
 subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY14) += f14
+subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY15) += f15
diff --git a/src/vendorcode/amd/agesa/f15/AGESA.h b/src/vendorcode/amd/agesa/f15/AGESA.h
new file mode 100644
index 0000000000..b18659e0ea
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/AGESA.h
@@ -0,0 +1,3566 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Agesa structures and definitions
+ *
+ * Contains AMD AGESA core interface
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Include
+ * @e \$Revision: 60222 $   @e \$Date: 2011-10-10 23:39:36 -0600 (Mon, 10 Oct 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+
+#ifndef _AGESA_H_
+#define _AGESA_H_
+
+#include  "Porting.h"
+#include  "AMD.h"
+
+//
+//
+// AGESA Types and Definitions
+//
+//
+
+// AGESA BASIC CALLOUTS
+#define AGESA_MEM_RELEASE              0x00028000
+
+// AGESA ADVANCED CALLOUTS, Processor
+#define AGESA_CHECK_UMA                0x00028100
+#define AGESA_DO_RESET                 0x00028101
+#define AGESA_ALLOCATE_BUFFER          0x00028102
+#define AGESA_DEALLOCATE_BUFFER        0x00028103
+#define AGESA_LOCATE_BUFFER            0x00028104
+#define AGESA_RUNFUNC_ONAP             0x00028105
+
+// AGESA ADVANCED CALLOUTS, HyperTransport
+
+// AGESA ADVANCED CALLOUTS, Memory
+#define AGESA_READ_SPD                 0x00028140
+#define AGESA_HOOKBEFORE_DRAM_INIT     0x00028141
+#define AGESA_HOOKBEFORE_DQS_TRAINING  0x00028142
+#define AGESA_READ_SPD_RECOVERY        0x00028143
+#define AGESA_HOOKBEFORE_EXIT_SELF_REF 0x00028144
+#define AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY     0x00028145
+#define AGESA_EXTERNAL____TRAIN_VREF_CHANGE     0x00028146
+
+// AGESA IDS CALLOUTS
+#define AGESA_GET_IDS_INIT_DATA       0x00028200
+
+// AGESA GNB CALLOUTS
+#define AGESA_GNB_PCIE_SLOT_RESET      0x00028301
+
+// AGESA FCH CALLOUTS
+#define AGESA_FCH_OEM_CALLOUT          0x00028401
+
+//------------------------------------------------------------------------
+//
+// HyperTransport Interface
+
+
+
+//-----------------------------------------------------------------------------
+//                         HT DEFINITIONS AND MACROS
+//
+//-----------------------------------------------------------------------------
+
+
+// Width equates for call backs
+#define HT_WIDTH_8_BITS              8                          ///< Specifies 8 bit, or up to 8 bit widths.
+#define HT_WIDTH_16_BITS             16                         ///< Specifies 16 bit, or up to 16 bit widths.
+#define HT_WIDTH_4_BITS              4
+#define HT_WIDTH_2_BITS              2
+#define HT_WIDTH_NO_LIMIT            HT_WIDTH_16_BITS
+
+// Frequency Limit equates for call backs which take a frequency supported mask.
+#define HT_FREQUENCY_LIMIT_200M      1                           ///< Specifies a limit of no more than 200 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_400M      7                           ///< Specifies a limit of no more than 400 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_600M      0x1F                        ///< Specifies a limit of no more than 600 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_800M      0x3F                        ///< Specifies a limit of no more than 800 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_1000M     0x7F                        ///< Specifies a limit of no more than 1000 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_HT1_ONLY  0x7F                        ///< Specifies a limit of no more than 1000 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_1200M     0xFF                        ///< Specifies a limit of no more than 1200 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_1400M     0x1FF                       ///< Specifies a limit of no more than 1400 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_1600M     0x3FF                       ///< Specifies a limit of no more than 1600 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_1800M     0x7FF                       ///< Specifies a limit of no more than 1800 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_2000M     0xFFF                       ///< Specifies a limit of no more than 2000 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_2200M     0x1FFF                      ///< Specifies a limit of no more than 2200 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_2400M     0x3FFF                      ///< Specifies a limit of no more than 2400 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_2600M     0x7FFF                      ///< Specifies a limit of no more than 2600 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_2800M     0x27FFF                     ///< Specifies a limit of no more than 2800 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_3000M     0x67FFF                     ///< Specifies a limit of no more than 3000 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_3200M     0xE7FFF                     ///< Specifies a limit of no more than 3200 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_3600M     0x1E7FFF
+#define HT_FREQUENCY_LIMIT_MAX       HT_FREQUENCY_LIMIT_3600M
+#define HT_FREQUENCY_NO_LIMIT        0xFFFFFFFF                  ///< Specifies a no limit of HT frequency.
+
+// Unit ID Clumping special values
+#define HT_CLUMPING_DISABLE          0x00000000
+#define HT_CLUMPING_NO_LIMIT         0xFFFFFFFF
+
+#define HT_LIST_TERMINAL             0xFF             ///< End of list.
+#define HT_LIST_MATCH_ANY            0xFE             ///< Match Any value, used for Sockets, Links, IO Chain Depth.
+#define HT_LIST_MATCH_INTERNAL_LINK  0xFD             ///< Match all of the internal links.
+
+// Event Notify definitions
+
+// Event definitions.
+
+// Coherent subfunction events
+#define HT_EVENT_COH_EVENTS             0x10001000
+#define HT_EVENT_COH_NO_TOPOLOGY        0x10011000    ///< See ::HT_EVENT_DATA_COH_NO_TOPOLOGY.
+#define HT_EVENT_COH_OBSOLETE000        0x10021000    //   No longer used.
+#define HT_EVENT_COH_PROCESSOR_TYPE_MIX 0x10031000    ///< See ::HT_EVENT_DATA_COH_PROCESSOR_TYPE_MIX.
+#define HT_EVENT_COH_NODE_DISCOVERED    0x10041000    ///< See ::HT_EVENT_COH_NODE_DISCOVERED.
+#define HT_EVENT_COH_MPCAP_MISMATCH     0x10051000    ///< See ::HT_EVENT_COH_MPCAP_MISMATCH.
+
+// Non-coherent subfunction events
+#define HT_EVENT_NCOH_EVENTS         0x10002000
+#define HT_EVENT_NCOH_BUID_EXCEED    0x10012000       ///< See ::HT_EVENT_DATA_NCOH_BUID_EXCEED
+#define HT_EVENT_NCOH_OBSOLETE000    0x10022000       //   No longer used.
+#define HT_EVENT_NCOH_BUS_MAX_EXCEED 0x10032000       ///< See ::HT_EVENT_DATA_NCOH_BUS_MAX_EXCEED.
+#define HT_EVENT_NCOH_CFG_MAP_EXCEED 0x10042000       ///< See ::HT_EVENT_DATA_NCOH_CFG_MAP_EXCEED.
+#define HT_EVENT_NCOH_DEVICE_FAILED  0x10052000       ///< See ::HT_EVENT_DATA_NCOH_DEVICE_FAILED
+#define HT_EVENT_NCOH_AUTO_DEPTH     0x10062000       ///< See ::HT_EVENT_NCOH_AUTO_DEPTH
+
+// Optimization subfunction events
+#define HT_EVENT_OPT_EVENTS               0x10003000
+#define HT_EVENT_OPT_REQUIRED_CAP_RETRY   0x10013000  ///< See ::HT_EVENT_DATA_OPT_REQUIRED_CAP.
+#define HT_EVENT_OPT_REQUIRED_CAP_GEN3    0x10023000  ///< See ::HT_EVENT_DATA_OPT_REQUIRED_CAP.
+#define HT_EVENT_OPT_UNUSED_LINKS         0x10033000  ///< See ::HT_EVENT_DATA_OPT_UNUSED_LINKS.
+#define HT_EVENT_OPT_LINK_PAIR_EXCEED     0x10043000  ///< See ::HT_EVENT_DATA_OPT_LINK_PAIR_EXCEED.
+
+// HW Fault events
+#define HT_EVENT_HW_EVENTS           0x10004000
+#define HT_EVENT_HW_SYNCFLOOD        0x10014000       ///< See ::HT_EVENT_DATA_HW_SYNCFLOOD.
+#define HT_EVENT_HW_HTCRC            0x10024000       ///< See ::HT_EVENT_DATA_HW_HT_CRC.
+
+// The Recovery HT component uses 0x10005000 for events.
+// For consistency, we avoid that range here.
+
+#define HT_MAX_NC_BUIDS 32
+//----------------------------------------------------------------------------
+//                         HT TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+
+/// Specify the state redundant links are to be left in after match.
+///
+/// After matching a link for IGNORE_LINK or SKIP_REGANG, the link may be left alone,
+/// or powered off.
+
+typedef enum {
+  MATCHED,                               ///< The link matches the requested customization.
+                                         ///< When used with IGNORE_LINK,
+                                         ///< this will generally require other software to initialize the link.
+                                         ///< When used with SKIP_REGANG,
+                                         ///< the two unganged links will be available for distribution.
+
+  POWERED_OFF,                           ///< Power the link off.  Support may vary based on processor model.
+                                         ///< Power Off is only supported for coherent links.
+                                         ///< Link power off may occur at a warm reset rather than immediately.
+                                         ///< When used with SKIP_REGANG, the paired sublink is powered off, not the matching link.
+
+  UNMATCHED,                             ///< The link should be processed according to normal defaults.
+                                         ///< Effectively, the link does not match the requested customization.
+                                         ///< This can be used to exclude links from a following match any.
+
+  MaxFinalLinkState                      ///< Not a final link state, use for limit checking.
+} FINAL_LINK_STATE;
+
+/// Swap a device from its current id to a new one.
+
+typedef struct {
+  IN       UINT8 FromId;                 ///< The device responding to FromId,
+  IN       UINT8 ToId;                   ///< will be moved to ToId.
+} BUID_SWAP_ITEM;
+
+
+/// Each Non-coherent chain may have a list of device swaps.  After performing the swaps,
+/// the final in order list of device ids is provided. (There can be more swaps than devices.)
+/// The unused entries in both are filled with 0xFF.
+
+typedef struct {
+  IN       BUID_SWAP_ITEM Swaps[HT_MAX_NC_BUIDS]; ///< The BUID Swaps to perform
+  IN       UINT8 FinalIds[HT_MAX_NC_BUIDS];       ///< The ordered final BUIDs, resulting from the swaps
+} BUID_SWAP_LIST;
+
+
+/// Control Manual Initialization of Non-Coherent Chains
+///
+/// This interface is checked every time a non-coherent chain is
+/// processed.  BUID assignment may be controlled explicitly on a
+/// non-coherent chain. Provide a swap list.  Swaps controls the
+/// BUID assignment and FinalIds provides the device to device
+/// Linking.  Device orientation can be detected automatically, or
+/// explicitly.  See interface documentation for more details.
+///
+/// If a manual swap list is not supplied,
+/// automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially
+/// based on each device's unit count.
+
+typedef struct {
+  // Match fields
+  IN       UINT8 Socket;                       ///< The Socket on which this chain is located
+  IN       UINT8 Link;                         ///< The Link on the host for this chain
+  // Override fields
+  IN       BUID_SWAP_LIST SwapList;            ///< The swap list
+} MANUAL_BUID_SWAP_LIST;
+
+
+/// Override options for DEVICE_CAP_OVERRIDE.
+///
+/// Specify which override actions should be performed.  For Checks, 1 means to check the item
+/// and 0 means to skip the check.  For the override options, 1 means to apply the override and
+/// 0 means to ignore the override.
+
+typedef struct {
+  IN       UINT32  IsCheckDevVenId:1;     ///< Check Match on Device/Vendor id
+  IN       UINT32  IsCheckRevision:1;     ///< Check Match on device Revision
+  IN       UINT32  IsOverrideWidthIn:1;   ///< Override Width In
+  IN       UINT32  IsOverrideWidthOut:1;  ///< Override Width Out
+  IN       UINT32  IsOverrideFreq:1;      ///< Override Frequency
+  IN       UINT32  IsOverrideClumping:1;  ///< Override Clumping
+  IN       UINT32  IsDoCallout:1;         ///< Make the optional callout
+} DEVICE_CAP_OVERRIDE_OPTIONS;
+
+/// Override capabilities of a device.
+///
+/// This interface is checked once for every Link on every IO device.
+/// Provide the width and frequency capability if needed for this device.
+/// This is used along with device capabilities, the limit interfaces, and northbridge
+/// limits to compute the default settings.  The components of the device's PCI config
+/// address are provided, so its settings can be consulted if need be.
+/// The optional callout is a catch all.
+
+typedef struct {
+  // Match fields
+  IN       UINT8 HostSocket;           ///< The Socket on which this chain is located.
+  IN       UINT8 HostLink;             ///< The Link on the host for this chain.
+  IN       UINT8 Depth;                ///< The Depth in the I/O chain from the Host.
+  IN       UINT32 DevVenId;            ///< The Device's PCI Vendor + Device ID (offset 0x00).
+  IN       UINT8 Revision;             ///< The Device's PCI Revision field (offset 0x08).
+  IN       UINT8 Link;                 ///< The Device's Link number (0 or 1).
+  IN       DEVICE_CAP_OVERRIDE_OPTIONS Options; ///< The options for this device override.
+  // Override fields
+  IN       UINT8 LinkWidthIn;          ///< modify to change the Link Width In.
+  IN       UINT8 LinkWidthOut;         ///< modify to change the Link Width Out.
+  IN       UINT32 FreqCap;             ///< modify to change the Link's frequency capability.
+  IN       UINT32 Clumping;            ///< modify to change Unit ID clumping support.
+  IN       CALLOUT_ENTRY Callout;      ///< optional call for really complex cases, or NULL.
+} DEVICE_CAP_OVERRIDE;
+
+/// Callout param struct for override capabilities of a device.
+///
+/// If the optional callout is implemented this param struct is passed to it.
+
+typedef struct {
+  IN       AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+  // Match fields
+  IN       UINT8 HostSocket;           ///< The Socket on which this chain is located.
+  IN       UINT8 HostLink;             ///< The Link on the host for this chain.
+  IN       UINT8 Depth;                ///< The Depth in the I/O chain from the Host.
+  IN       UINT32 DevVenId;            ///< The Device's PCI Vendor + Device ID (offset 0x00).
+  IN       UINT8 Revision;             ///< The Device's PCI Revision field (offset 0x08).
+  IN       UINT8 Link;                 ///< The Device's Link number (0 or 1).
+  IN       PCI_ADDR PciAddress;        ///< The Device's PCI Address.
+  // Override fields
+     OUT   UINT8 *LinkWidthIn;          ///< modify to change the Link Width In.
+     OUT   UINT8 *LinkWidthOut;         ///< modify to change the Link Width Out.
+     OUT   UINT32 *FreqCap;             ///< modify to change the Link's frequency capability.
+     OUT   UINT32 *Clumping;            ///< modify to change Unit ID clumping support.
+} DEVICE_CAP_CALLOUT_PARAMS;
+
+///  Limits for CPU to CPU Links.
+///
+///  For each coherent connection this interface is checked once.
+///  Provide the frequency and width if needed for this Link (usually based on board
+///  restriction).  This is used with CPU device capabilities and northbridge limits
+///  to compute the default settings.
+
+typedef struct {
+  // Match fields
+  IN       UINT8 SocketA;                ///< One Socket on which this Link is located
+  IN       UINT8 LinkA;                  ///< The Link on this Node
+  IN       UINT8 SocketB;                ///< The other Socket on which this Link is located
+  IN       UINT8 LinkB;                  ///< The Link on that Node
+  // Limit fields
+  IN       UINT8 ABLinkWidthLimit;       ///< modify to change the Link Width A->B
+  IN       UINT8 BALinkWidthLimit;       ///< modify to change the Link Width B-<A
+  IN       UINT32 PcbFreqCap;            ///< modify to change the Link's frequency capability
+} CPU_TO_CPU_PCB_LIMITS;
+
+///  Get limits for non-coherent Links.
+///
+/// For each non-coherent connection this interface is checked once.
+/// Provide the frequency and width if needed for this Link (usually based on board
+/// restriction).  This is used with device capabilities, device overrides, and northbridge limits
+/// to compute the default settings.
+///
+typedef struct {
+  // Match fields
+  IN       UINT8 HostSocket;               ///< The Socket on which this Link is located
+  IN       UINT8 HostLink;                 ///< The Link about to be initialized
+  IN       UINT8 Depth;                    ///< The Depth in the I/O chain from the Host
+  // Limit fields
+  IN       UINT8 DownstreamLinkWidthLimit; ///< modify to change the Link Width going away from processor
+  IN       UINT8 UpstreamLinkWidthLimit;   ///< modify to change the Link Width moving toward processor
+  IN       UINT32 PcbFreqCap;              ///< modify to change the Link's frequency capability
+} IO_PCB_LIMITS;
+
+///  Manually control bus number assignment.
+///
+/// This interface is checked every time a non-coherent chain is processed.
+/// If a system can not use the auto Bus numbering feature for non-coherent chain bus
+/// assignments, this interface can provide explicit control.  For each chain, provide
+/// the bus number range to use.
+
+typedef struct {
+  // Match fields
+  IN       UINT8 Socket;                 ///< The Socket on which this chain is located
+  IN       UINT8 Link;                   ///< The Link on the host for this chain
+  // Override fields
+  IN       UINT8 SecBus;                 ///< Secondary Bus number for this non-coherent chain
+  IN       UINT8 SubBus;                 ///< Subordinate Bus number
+} OVERRIDE_BUS_NUMBERS;
+
+
+///  Ignore a Link.
+///
+///  This interface is checked every time a coherent Link is found and then every
+///  time a non-coherent Link from a CPU is found.
+///  Any coherent or non-coherent Link from a CPU can be ignored and not used
+///  for discovery or initialization.  Useful for connection based systems.
+///  (Note: not checked for IO device to IO Device Links.)
+///  (Note: not usable for internal links (MCM processors).)
+
+typedef struct {
+  // Match fields
+  IN       UINT8 Socket;                 ///< The Socket on which this Link is located
+  IN       UINT8 Link;                   ///< The Link about to be initialized
+  // Customization fields
+  IN       FINAL_LINK_STATE LinkState;   ///< The link may be left unitialized, or powered off.
+} IGNORE_LINK;
+
+
+///  Skip reganging of subLinks.
+///
+///  This interface is checked whenever two subLinks are both connected to the same CPUs.
+///  Normally, unganged sublinks between the same two CPUs are reganged.
+///  Provide a matching structure to leave the Links unganged.
+
+typedef struct {
+  // Match fields
+  IN       UINT8 SocketA;                ///< One Socket on which this Link is located
+  IN       UINT8 LinkA;                  ///< The Link on this Node
+  IN       UINT8 SocketB;                ///< The other Socket on which this Link is located
+  IN       UINT8 LinkB;                  ///< The Link on that Node
+  // Customization fields
+  IN       FINAL_LINK_STATE LinkState;   ///< The paired sublink may be active, or powered off.
+} SKIP_REGANG;
+
+///  The System Socket layout, which sockets are physically connected.
+///
+///  The hardware method for Socket naming is preferred.  Use this software method only
+///  if required.
+
+typedef struct {
+  IN       UINT8 CurrentSocket;    ///< The socket from which this connection originates.
+  IN       UINT8 CurrentLink;      ///< The Link from the source socket connects to another socket.
+  IN       UINT8 TargetSocket;     ///< The target socket which is connected on that link.
+} SYSTEM_PHYSICAL_SOCKET_MAP;
+
+//----------------------------------------------------------------------------
+///
+/// This is the input structure for AmdHtInitialize.
+///
+typedef struct {
+  // Basic level customization
+  IN       UINT8 AutoBusStart;           ///< For automatic bus number assignment, starting bus number - usually zero.
+                                         ///< @BldCfgItem{BLDCFG_STARTING_BUSNUM}
+  IN       UINT8 AutoBusMax;             ///< For automatic bus number assignment, do not assign above max.
+                                         ///< @BldCfgItem{BLDCFG_MAXIMUM_BUSNUM}
+  IN       UINT8 AutoBusIncrement;       ///< For automatic bus number assignment, each chain gets this many busses.
+                                         ///< @BldCfgItem{BLDCFG_ALLOCATED_BUSNUM}
+
+  // Advanced Level Customization
+  IN       MANUAL_BUID_SWAP_LIST *ManualBuidSwapList;     ///< Provide Manual Swap List, if any.
+                                                          ///< @BldCfgItem{BLDCFG_BUID_SWAP_LIST}
+  IN       DEVICE_CAP_OVERRIDE *DeviceCapOverrideList;    ///< Provide Device Overrides, if any.
+                                                          ///< @BldCfgItem{BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST}
+  IN       CPU_TO_CPU_PCB_LIMITS *CpuToCpuPcbLimitsList;   ///< Provide CPU PCB Limits, if any.
+                                                          ///< @BldCfgItem{BLDCFG_HTFABRIC_LIMITS_LIST}.
+                                                          ///< @n @e Examples: See @ref FrequencyLimitExamples "Frequency Limit Examples".
+  IN       IO_PCB_LIMITS *IoPcbLimitsList;                ///< Provide IO PCB Limits, if any.
+                                                          ///< @BldCfgItem{BLDCFG_HTCHAIN_LIMITS_LIST}.
+                                                          ///< @n @e Examples: See @ref FrequencyLimitExamples "Frequency Limit Examples".
+  IN       OVERRIDE_BUS_NUMBERS *OverrideBusNumbersList;  ///< Provide manual Bus Number assignment, if any.
+                                                          ///< Use either auto bus numbering or override bus
+                                                          ///< numbers, not both.
+                                                          ///< @BldCfgItem{BLDCFG_BUS_NUMBERS_LIST}
+
+  IN       IGNORE_LINK *IgnoreLinkList;                   ///< Provide links to ignore, if any.
+                                                          ///< @BldCfgItem{BLDCFG_IGNORE_LINK_LIST}
+  IN       SKIP_REGANG *SkipRegangList;                   ///< Provide links to remain unganged, if any.
+                                                          ///< @BldCfgItem{BLDCFG_LINK_SKIP_REGANG_LIST}
+                                                          ///< @n @e Examples: See @ref PerfPerWattHt "Performance-per-watt Optimization".
+
+  // Expert Level Customization
+  IN       UINT8 **Topolist;                         ///< Use this topology list in addition to the built in, if not NULL.
+                                                     ///< @BldCfgItem{BLDCFG_ADDITIONAL_TOPOLOGIES_LIST}
+  IN       SYSTEM_PHYSICAL_SOCKET_MAP *SystemPhysicalSocketMap;
+                                                     ///< The hardware socket naming method is preferred,
+                                                     ///<  If it can't be used, this provides a software method.
+                                                     ///< @BldCfgItem{BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP}
+} AMD_HT_INTERFACE;
+
+//-----------------------------------------------------------------------------
+//
+// HT Recovery Interface
+//
+
+
+/*-----------------------------------------------------------------------------
+ *              HT Recovery DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+// BBHT subfunction events
+#define HT_EVENT_BB_EVENTS         0x10005000
+#define HT_EVENT_BB_BUID_EXCEED    0x10015000
+#define HT_EVENT_BB_DEVICE_FAILED  0x10055000
+#define HT_EVENT_BB_AUTO_DEPTH     0x10065000
+
+/*----------------------------------------------------------------------------
+ *                      HT Recovery   TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/// The Interface structure to Recovery HT.
+
+typedef struct {
+  IN       MANUAL_BUID_SWAP_LIST *ManualBuidSwapList;  ///< Option to manually control SB link init
+                                                       ///< @BldCfgItem{BLDCFG_BUID_SWAP_LIST}
+     OUT   UINT32 Depth;           ///< If auto init was used this is set to the depth of the chain,
+                                   ///< else, for manual init unmodified.
+} AMD_HT_RESET_INTERFACE;
+
+
+//-----------------------------------------------------------------------------
+//                     FCH DEFINITIONS AND MACROS
+//
+//-----------------------------------------------------------------------------
+
+/// Configuration values for SdConfig
+typedef enum {
+  SdDisable = 0,                      ///< Disabled
+  SdAmda,                             ///< AMDA,  set 24,18,16,  default
+  SdDma,                              ///< DMA clear 24, 16, set 18
+  SdPio                               ///< PIO clear 24,18,16
+} SD_MODE;
+
+/// Configuration values for SdClockControl
+typedef enum {
+  Sd50MhzTraceCableLengthWithinSixInches = 4,           ///< 50Mhz, default
+  Sd40MhzTraceCableLengthSix2ElevenInches = 6,          ///< 40Mhz
+  Sd25MhzTraceCableLengthEleven2TwentyfourInches = 7,   ///< 25Mhz
+} SD_CLOCK_CONTROL;
+
+/// Configuration values for AzaliaController
+typedef enum {
+  AzAuto = 0,                         ///< Auto - Detect Azalia controller automatically
+  AzDisable,                          ///< Diable - Disable Azalia controller
+  AzEnable                            ///< Enable - Enable Azalia controller
+} HDA_CONFIG;
+
+/// Configuration values for IrConfig
+typedef enum {
+  IrDisable  = 0,                     ///< Disable
+  IrRxTx0    = 1,                     ///< Rx and Tx0
+  IrRxTx1    = 2,                     ///< Rx and Tx1
+  IrRxTx0Tx1 = 3                      ///< Rx and both Tx0,Tx1
+} IR_CONFIG;
+
+/// Configuration values for SataClass
+typedef enum {
+  SataNativeIde = 0,                  ///< Native IDE mode
+  SataRaid,                           ///< RAID mode
+  SataAhci,                           ///< AHCI mode
+  SataLegacyIde,                      ///< Legacy IDE mode
+  SataIde2Ahci,                       ///< IDE->AHCI mode
+  SataAhci7804,                       ///< AHCI mode as 7804 ID (AMD driver)
+  SataIde2Ahci7804                    ///< IDE->AHCI mode as 7804 ID (AMD driver)
+} SATA_CLASS;
+
+/// Configuration values for BLDCFG_FCH_GPP_LINK_CONFIG
+typedef enum {
+  PortA4       = 0,                   ///< 4:0:0:0
+  PortA2B2     = 2,                   ///< 2:2:0:0
+  PortA2B1C1   = 3,                   ///< 2:1:1:0
+  PortA1B1C1D1 = 4                    ///< 1:1:1:1
+} GPP_LINKMODE;
+
+/// Configuration values for FchPowerFail
+typedef enum {
+  AlwaysOff   = 0,                    ///< Always power off after power resumes
+  AlwaysOn    = 1,                    ///< Always power on after power resumes
+  UsePrevious = 3,                    ///< Resume to same setting when power fails
+} POWER_FAIL;
+
+
+/// Configuration values for SATA Link Speed
+typedef enum {
+  Gen1   = 1,                         ///< SATA port GEN1 speed
+  Gen2   = 2,                         ///< SATA port GEN2 speed
+  Gen3   = 3,                         ///< SATA port GEN3 speed
+} SATA_SPEED;
+
+
+/// Configuration values for GPIO function
+typedef enum {
+  Function0   = 0,                    ///< GPIO Function 1
+  Function1   = 1,                    ///< GPIO Function 1
+  Function2   = 2,                    ///< GPIO Function 2
+  Function3   = 3,                    ///< GPIO Function 3
+} GPIO_FUN;
+
+
+/// Configuration values for GPIO_CFG
+typedef enum {
+  OwnedByEc   = 1 << 0,               ///< This bit can only be written by EC
+  OwnedByHost = 1 << 1,               ///< This bit can only be written by host (BIOS)
+  Sticky      = 1 << 2,               ///< If set, [6:3] are sticky
+  PullUpB     = 1 << 3,               ///< 0: Pullup enable; 1: Pullup disabled
+  PullDown    = 1 << 4,               ///< 0: Pulldown disabled; 1: Pulldown enable
+  GpioOutEnB  = 1 << 5,               ///< 0: Output enable; 1: Output disable
+  GpioOut     = 1 << 6,               ///< Output state when GpioOutEnB is 0
+  GpioIn      = 1 << 7,               ///< This bit is read only - current pin state
+} CFG_BYTE;
+
+/// FCH GPIO CONTROL
+typedef struct {
+  IN         UINT8        GpioPin;               ///< Gpio Pin, valid range: 0-67, 128-150, 160-228
+  IN         GPIO_FUN     PinFunction;           ///< Multi-function selection
+  IN         CFG_BYTE     CfgByte;               ///< GPIO Register value
+} GPIO_CONTROL;
+
+///
+/// FCH SCI MAP CONTROL
+///
+typedef struct {
+  IN         UINT8        InputPin;              ///< Input Pin, valid range 0-63
+  IN         UINT8        GpeMap;                ///< Gpe Map, valid range 0-31
+} SCI_MAP_CONTROL;
+
+///
+/// FCH SATA PHY CONTROL
+///
+typedef struct {
+  IN         BOOLEAN      CommonPhy;             ///< Common PHY or not
+                                      ///<   @li <b>FALSE</b> - Only applied to specified port
+                                      ///<   @li <b>TRUE</b>  - Apply to all SATA ports
+  IN         SATA_SPEED   Gen;                   ///< SATA speed
+  IN         UINT8        Port;                  ///< Port number, valid range: 0-7
+  IN         UINT32       PhyData;               ///< SATA PHY data, valid range: 0-0xFFFFFFFF
+} SATA_PHY_CONTROL;
+
+///
+/// FCH Component Data Structure in InitReset stage
+///
+typedef struct {
+  IN       BOOLEAN      UmiGen2;             ///< Enable Gen2 data rate of UMI
+                                             ///<   @li <b>FALSE</b> - Disable Gen2
+                                             ///<   @li <b>TRUE</b>  - Enable Gen2
+
+  IN       BOOLEAN      SataEnable;          ///< SATA controller function
+                                             ///<   @li <b>FALSE</b> - SATA controller is disabled
+                                             ///<   @li <b>TRUE</b> - SATA controller is enabled
+
+  IN       BOOLEAN      IdeEnable;           ///< SATA IDE controller mode enabled/disabled
+                                             ///<   @li <b>FALSE</b> - IDE controller is disabled
+                                             ///<   @li <b>TRUE</b> - IDE controller is enabled
+
+  IN       BOOLEAN      GppEnable;           ///< Master switch of GPP function
+                                             ///<   @li <b>FALSE</b> - GPP disabled
+                                             ///<   @li <b>TRUE</b> - GPP enabled
+
+  IN       BOOLEAN      Xhci0Enable;         ///< XHCI0 controller function
+                                             ///<   @li <b>FALSE</b> - XHCI0 controller disabled
+                                             ///<   @li <b>TRUE</b> - XHCI0 controller enabled
+
+  IN       BOOLEAN      Xhci1Enable;         ///< XHCI1 controller function
+                                             ///<   @li <b>FALSE</b> - XHCI1 controller disabled
+                                             ///<   @li <b>TRUE</b> - XHCI1 controller enabled
+} FCH_RESET_INTERFACE;
+
+
+///
+/// FCH Component Data Structure from InitEnv stage
+///
+typedef struct {
+  IN       SD_MODE      SdConfig;            ///< Secure Digital (SD) controller mode
+  IN       HDA_CONFIG   AzaliaController;    ///< Azalia HD Audio Controller
+
+  IN       IR_CONFIG    IrConfig;            ///< Infrared (IR) Configuration
+  IN       BOOLEAN      UmiGen2;             ///< Enable Gen2 data rate of UMI
+                                             ///<   @li <b>FALSE</b> - Disable Gen2
+                                             ///<   @li <b>TRUE</b>  - Enable Gen2
+
+  IN       SATA_CLASS   SataClass;           ///< SATA controller mode
+  IN       BOOLEAN      SataEnable;          ///< SATA controller function
+                                             ///<   @li <b>FALSE</b> - SATA controller is disabled
+                                             ///<   @li <b>TRUE</b> - SATA controller is enabled
+
+  IN       BOOLEAN      IdeEnable;           ///< SATA IDE controller mode enabled/disabled
+                                             ///<   @li <b>FALSE</b> - IDE controller is disabled
+                                             ///<   @li <b>TRUE</b> - IDE controller is enabled
+
+  IN       BOOLEAN      SataIdeMode;         ///< Native mode of SATA IDE controller
+                                             ///<   @li <b>FALSE</b> - Legacy IDE mode
+                                             ///<   @li <b>TRUE</b> - Native IDE mode
+
+  IN       BOOLEAN      Ohci1Enable;         ///< OHCI controller #1 Function
+                                             ///<   @li <b>FALSE</b> - OHCI1 is disabled
+                                             ///<   @li <b>TRUE</b> - OHCI1 is enabled
+
+  IN       BOOLEAN      Ohci2Enable;         ///< OHCI controller #2 Function
+                                             ///<   @li <b>FALSE</b> - OHCI2 is disabled
+                                             ///<   @li <b>TRUE</b> - OHCI2 is enabled
+
+  IN       BOOLEAN      Ohci3Enable;         ///< OHCI controller #3 Function
+                                             ///<   @li <b>FALSE</b> - OHCI3 is disabled
+                                             ///<   @li <b>TRUE</b> - OHCI3 is enabled
+
+  IN       BOOLEAN      Ohci4Enable;         ///< OHCI controller #4 Function
+                                             ///<   @li <b>FALSE</b> - OHCI4 is disabled
+                                             ///<   @li <b>TRUE</b> - OHCI4 is enabled
+
+  IN       BOOLEAN      XhciSwitch;          ///< XHCI controller Function
+                                             ///<   @li <b>FALSE</b> - XHCI is disabled
+                                             ///<   @li <b>TRUE</b> - XHCI is enabled
+
+  IN       BOOLEAN      GppEnable;           ///< Master switch of GPP function
+                                             ///<   @li <b>FALSE</b> - GPP disabled
+                                             ///<   @li <b>TRUE</b> - GPP enabled
+
+  IN       POWER_FAIL   FchPowerFail;        ///< FCH power failure option
+} FCH_INTERFACE;
+
+
+/*----------------------------------------------------------------------------
+ *   CPU Feature related info
+ *----------------------------------------------------------------------------
+ */
+
+/// Build Configuration values for BLDCFG_PLATFORM_C1E_MODE
+typedef enum {
+  C1eModeDisabled                   = 0,   ///< Disabled
+  C1eModeAuto                       = 1,   ///< Auto mode enables the best C1e method for the
+                                           ///< currently installed processor
+  C1eModeHardware                   = 2,   ///< Hardware method
+  C1eModeMsgBased                   = 3,   ///< Message-based method
+  C1eModeSoftwareDeprecated         = 4,   ///< Deprecated software SMI method.
+                                           ///< Refer to "Addendum\Examples\C1eSMMHandler.asm" for
+                                           ///< example host BIOS SMM Handler implementation
+  C1eModeHardwareSoftwareDeprecated = 5,   ///< Hardware or deprecated software SMI method
+  MaxC1eMode                        = 6    ///< Not a valid value, used for verifying input
+} PLATFORM_C1E_MODES;
+
+/// Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE
+typedef enum {
+  CStateModeDisabled = 0,           ///< Disabled
+  CStateModeC6       = 1,           ///< C6 State
+  MaxCStateMode      = 2            ///< Not a valid value, used for verifying input
+} PLATFORM_CSTATE_MODES;
+
+/// Build Configuration values for BLDCFG_PLATFORM_CPB_MODE
+typedef enum {
+  CpbModeAuto     = 0,           ///< Auto
+  CpbModeDisabled = 1,           ///< Disabled
+  MaxCpbMode      = 2            ///< Not a valid value, used for verifying input
+} PLATFORM_CPB_MODES;
+
+/// Build Configuration values for BLDCFG_LOW_POWER_PSTATE_FOR_PROCHOT_MODE
+typedef enum {
+  LOW_POWER_PSTATE_FOR_PROCHOT_AUTO      = 0,           ///< Auto
+  LOW_POWER_PSTATE_FOR_PROCHOT_DISABLE   = 1,           ///< Disabled
+  MAX_LOW_POWER_PSTATE_FOR_PROCHOT_MODE  = 2            ///< Not a valid value, used for verifying input
+} PLATFORM_LOW_POWER_PSTATE_MODES;
+
+/*----------------------------------------------------------------------------
+ *   GNB PCIe configuration info
+ *----------------------------------------------------------------------------
+ */
+
+// Event definitions
+
+
+#define GNB_EVENT_INVALID_CONFIGURATION               0x20010000   // User configuration invalid
+#define GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION 0x20010001   // Requested lane allocation for PCIe port can not be supported
+#define GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION     0x20010002   // Requested incorrect PCIe port device address
+#define GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION      0x20010003   // Incorrect parameter in DDI link configuration
+#define GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION    0x20010004   // Invalid with for PCIe port or DDI link
+#define GNB_EVENT_INVALID_LANES_CONFIGURATION         0x20010005   // Lane double subscribe lanes
+#define GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION  0x20010006   // Requested lane allocation for DDI link(s) can not be supported
+#define GNB_EVENT_LINK_TRAINING_FAIL                  0x20020000   // PCIe Link training fail
+#define GNB_EVENT_BROKEN_LANE_RECOVERY                0x20030000   // Broken lane workaround applied to recover link training
+#define GNB_EVENT_GEN2_SUPPORT_RECOVERY               0x20040000   // Scale back to GEN1 to recover link training
+
+
+#define DESCRIPTOR_TERMINATE_LIST           0x80000000ull
+#define DESCRIPTOR_IGNORE                   0x40000000ull
+
+/// PCIe port misc extended controls
+typedef struct  {
+  IN      UINT8                     LinkComplianceMode :1;  ///< Force port into compliance mode (device will not be trained, port output compliance pattern)
+  IN      UINT8                     LinkSafeMode       :2;  /**< Safe mode PCIe capability. (Parameter may limit PCIe speed requested through PCIe_PORT_DATA::LinkSpeedCapability)
+                                                             *  @li @b 0 - port can advertize muximum supported capability
+                                                             *  @li @b 1 - port limit advertized capability and speed to PCIe Gen1
+                                                             */
+  IN      UINT8                     SbLink             :1;  /**< PCIe link type
+                                                             *  @li @b 0 - General purpose port
+                                                             *  @li @b 1 - Port connected to SB
+                                                             */
+} PCIe_PORT_MISC_CONTROL;
+
+
+/// PCIe port configuration data
+typedef struct  {
+  IN       UINT8                   PortPresent;              ///< Enable PCIe port for initialization.
+  IN       UINT8                   ChannelType;              /**< Channel type.
+                                                               *  @li @b 0 - "lowLoss",
+                                                               *  @li @b 1 - "highLoss",
+                                                               *  @li @b 2 - "mob0db",
+                                                               *  @li @b 3 - "mob3db",
+                                                               *  @li @b 4 - "extnd6db"
+                                                               *  @li @b 5 - "extnd8db"
+                                                               */
+  IN       UINT8                   DeviceNumber;             /**< PCI Device number for port.
+                                                               *   @li @b 0 - Native port device number
+                                                               *   @li @b N - Port device number (See available configurations @ref F12LaneConfigurations "Family 0x12",  @ref F14ONLaneConfigurations "Family 0x14(ON)")
+                                                               */
+  IN       UINT8                   FunctionNumber;           ///< Reserved for future use
+  IN       UINT8                   LinkSpeedCapability;      /**< PCIe link speed/
+                                                               *  @li @b 0 - Maximum supported by silicon
+                                                               *  @li @b 1 - Gen1
+                                                               *  @li @b 2 - Gen2
+                                                               *  @li @b 3 - Gen3
+                                                               */
+  IN       UINT8                   LinkAspm;                 /**< ASPM control. (see AgesaPcieLinkAspm for additional option to control ASPM)
+                                                               *  @li @b 0 - Disabled
+                                                               *  @li @b 1 - L0s only
+                                                               *  @li @b 2 - L1 only
+                                                               *  @li @b 3 - L0s and L1
+                                                               */
+  IN       UINT8                   LinkHotplug;              /**< Hotplug control.
+                                                               *  @li @b 0 - Disabled
+                                                               *  @li @b 1 - Basic
+                                                               *  @li @b 2 - Server
+                                                               *  @li @b 3 - Enhanced
+                                                               */
+  IN       UINT8                   ResetId;                  /**< Arbitrary number greater than 0 assigned by platform firmware for GPIO
+                                                               *   identification which control reset for given port.
+                                                               *   Each port with unique GPIO should have unique ResetId assigned.
+                                                               *   All ports use same GPIO to control reset should have same ResetId assigned.
+                                                               *   see AgesaPcieSlotResetContol.
+                                                               */
+  IN       PCIe_PORT_MISC_CONTROL  MiscControls;             ///< Misc extended controls
+} PCIe_PORT_DATA;
+
+/// DDI channel lane mapping
+typedef struct {                                          ///< Structure that discribe lane mapping
+  IN      UINT8              Lane0   :2;                  /**< Lane 0 mapping
+                                                           *  @li @b 0 - Map to lane 0
+                                                           *  @li @b 1 - Map to lane 1
+                                                           *  @li @b 2 - Map to lane 2
+                                                           *  @li @b 2 - Map to lane 3
+                                                           */
+  IN      UINT8              Lane1   :2;                  ///< Lane 1 mapping (see "Lane 0 mapping")
+  IN      UINT8              Lane2   :2;                  ///< Lane 2 mapping (see "Lane 0 mapping")
+  IN      UINT8              Lane3   :2;                  ///< Lane 3 mapping (see "Lane 0 mapping")
+} CHANNEL_MAPPING;                                        ///< Lane mapping
+
+/// Common Channel Mapping
+typedef union {
+  IN      UINT8                ChannelMappingValue;       ///< Raw lane mapping
+  IN      CHANNEL_MAPPING      ChannelMapping;            ///< Channel mapping
+} CONN_CHANNEL_MAPPING;
+
+/// DDI Configuration data
+typedef struct  {
+  IN       UINT8                ConnectorType;            /**< Display Connector Type
+                                                            *  @li @b 0 - DP
+                                                            *  @li @b 1 - eDP
+                                                            *  @li @b 2 - Single Link DVI-D
+                                                            *  @li @b 3 - Dual  Link DVI-D (see @ref F12DualLinkDviDescription "Family 0x12 Dual Link DVI connector description")
+                                                            *  @li @b 4 - HDMI
+                                                            *  @li @b 5 - Travis DP-to-VGA
+                                                            *  @li @b 6 - Travis DP-to-LVDS
+                                                            *  @li @b 7 - Hudson-2 NutMeg DP-to-VGA
+                                                            *  @li @b 8 - Single Link DVI-I
+                                                            *  @li @b 9 - Native CRT (Family 0x14)
+                                                            *  @li @b 10 - Native LVDS (Family 0x14)
+                                                            *  @li @b 11 - Auto detect LCD panel connector type. VBIOS is able to auto detect the LVDS connector type: native LVDS, eDP or Travis-LVDS
+                                                            *              The auto detection method only support panel with EDID.
+                                                            */
+  IN       UINT8                AuxIndex;                 /**< Indicates which AUX or DDC Line is used
+                                                            *  @li @b 0 - AUX1
+                                                            *  @li @b 1 - AUX2
+                                                            *  @li @b 2 - AUX3
+                                                            *  @li @b 3 - AUX4
+                                                            *  @li @b 4 - AUX5
+                                                            *  @li @b 5 - AUX6
+                                                            */
+  IN       UINT8                HdpIndex;                 /**< Indicates which HDP pin is used
+                                                            *  @li @b 0 - HDP1
+                                                            *  @li @b 1 - HDP2
+                                                            *  @li @b 2 - HDP3
+                                                            *  @li @b 3 - HDP4
+                                                            *  @li @b 4 - HDP5
+                                                            *  @li @b 5 - HDP6
+                                                            */
+  IN       CONN_CHANNEL_MAPPING Mapping[2];               /**< Set specific mapping of lanes to connector pins
+                                                            *  @li Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane
+                                                            *  @li Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only applicable for Dual DDI link)
+                                                            *  if Mapping[x] set to 0 than default mapping assumed
+                                                            */
+  IN       UINT8                LanePnInversionMask;      /**< Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port.
+                                                            *  @li 0 - Do not invert (default)
+                                                            *  @li 1 - Invert P and N on this lane
+                                                            */
+} PCIe_DDI_DATA;
+
+/// Engine Configuration
+typedef struct {
+  IN       UINT8                EngineType;               /**< Engine type
+                                                           *  @li @b 0 -  Ignore engine configuration
+                                                           *  @li @b 1 -  PCIe port
+                                                           *  @li @b 2 -  DDI
+                                                           */
+  IN       UINT16               StartLane;                /**< Start Lane ID (in reversed configuration StartLane > EndLane)
+                                                           * See lane description for @ref F12PcieLaneDescription "Family 0x12"
+                                                           * @ref F14ONPcieLaneDescription "Family 0x14(ON)".
+                                                           * See lane configurations for @ref F12LaneConfigurations "Family 0x12"
+                                                           * @ref F14ONLaneConfigurations "Family 0x14(ON)".
+                                                           */
+  IN       UINT16               EndLane;                  /**< End lane ID (in reversed configuration StartLane > EndLane)
+                                                           * See lane description for @ref F12PcieLaneDescription "Family 0x12",
+                                                           * @ref F14ONPcieLaneDescription "Family 0x14(ON)".
+                                                           * See lane configurations for @ref F12LaneConfigurations "Family 0x12"
+                                                           * @ref F14ONLaneConfigurations "Family 0x14(ON)".
+                                                           */
+
+} PCIe_ENGINE_DATA;
+
+/// PCIe port descriptor
+typedef struct {
+  IN       UINT32               Flags;                    /**< Descriptor flags
+                                                           * @li @b Bit31 - last descriptor in complex
+                                                           */
+  IN       PCIe_ENGINE_DATA     EngineData;               ///< Engine data
+  IN       PCIe_PORT_DATA       Port;                     ///< PCIe port specific configuration info
+} PCIe_PORT_DESCRIPTOR;
+
+/// DDI descriptor
+typedef struct {
+  IN       UINT32               Flags;                    /**< Descriptor flags
+                                                           * @li @b Bit31 - last descriptor in complex
+                                                           */
+  IN       PCIe_ENGINE_DATA     EngineData;               ///< Engine data
+  IN       PCIe_DDI_DATA        Ddi;                      ///< DDI port specific configuration info
+} PCIe_DDI_DESCRIPTOR;
+
+/// PCIe Complex descriptor
+typedef struct {
+  IN       UINT32               Flags;                    /**< Descriptor flags
+                                                           * @li @b Bit31 - last descriptor in topology
+                                                           */
+  IN       UINT32               SocketId;                 ///< Socket Id
+  IN       PCIe_PORT_DESCRIPTOR *PciePortList;            ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST).
+  IN       PCIe_DDI_DESCRIPTOR  *DdiLinkList;             ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST).
+  IN       VOID                 *Reserved;                ///< Reserved for future use
+} PCIe_COMPLEX_DESCRIPTOR;
+
+/// Action to control PCIe slot reset
+typedef enum {
+  AssertSlotReset,                                        ///< Assert slot reset
+  DeassertSlotReset                                       ///< Deassert slot reset
+} PCIE_RESET_CONTROL;
+
+///Slot Reset Info
+typedef struct {
+  IN      AMD_CONFIG_PARAMS     StdHeader;                ///< Standard configuration header
+  IN      UINT8                 ResetId;                  ///< Slot reset ID as specified in PCIe_PORT_DESCRIPTOR
+  IN      UINT8                 ResetControl;             ///< Reset control as in PCIE_RESET_CONTROL
+} PCIe_SLOT_RESET_INFO;
+
+/// Engine descriptor type
+typedef enum {
+  PcieUnusedEngine = 0,                                   ///< Unused descriptor
+  PciePortEngine = 1,                                     ///< PCIe port
+  PcieDdiEngine = 2,                                      ///< DDI
+  MaxPcieEngine                                           ///< Max engine type for boundary check.
+} PCIE_ENGINE_TYPE;
+
+/// PCIe link capability/speed
+typedef enum  {
+  PcieGenMaxSupported,                                    ///< Maximum supported
+  PcieGen1 = 1,                                           ///< Gen1
+  PcieGen2,                                               ///< Gen2
+  MaxPcieGen                                              ///< Max Gen for boundary check
+} PCIE_LINK_SPEED_CAP;
+
+/// PCIe PSPP Power policy
+typedef enum  {
+  PsppDisabled,                                           ///< PSPP disabled
+  PsppPerformance = 1,                                    ///< Performance
+  PsppBalanceHigh,                                        ///< Balance-High
+  PsppBalanceLow,                                         ///< Balance-Low
+  PsppPowerSaving,                                        ///< Power Saving
+  MaxPspp                                                 ///< Max Pspp for boundary check
+} PCIE_PSPP_POLICY;
+
+/// DDI display connector type
+typedef enum {
+  ConnectorTypeDP,                                        ///< DP
+  ConnectorTypeEDP,                                       ///< eDP
+  ConnectorTypeSingleLinkDVI,                             ///< Single Link DVI-D
+  ConnectorTypeDualLinkDVI,                               ///< Dual  Link DVI-D
+  ConnectorTypeHDMI,                                      ///< HDMI
+  ConnectorTypeTravisDpToVga,                             ///< Travis DP-to-VGA
+  ConnectorTypeTravisDpToLvds,                            ///< Travis DP-to-LVDS
+  ConnectorTypeNutmegDpToVga,                             ///< Hudson-2 NutMeg DP-to-VGA
+  ConnectorTypeSingleLinkDviI,                            ///< Single Link DVI-I
+  ConnectorTypeCrt,                                       ///< CRT (VGA)
+  ConnectorTypeLvds,                                      ///< LVDS
+  ConnectorTypeAutoDetect,                                ///< VBIOS auto detect connector type (native LVDS, eDP or Travis-LVDS)
+  MaxConnectorType                                        ///< Not valid value, used to verify input
+} PCIE_CONNECTOR_TYPE;
+
+/// PCIe link channel type
+typedef enum {
+  ChannelTypeLowLoss,                                     ///< Low Loss
+  ChannelTypeHighLoss,                                    ///< High Loss
+  ChannelTypeMob0db,                                      ///< Mobile 0dB
+  ChannelTypeMob3db,                                      ///< Mobile 3dB
+  ChannelTypeExt6db,                                      ///< Extended 6dB
+  ChannelTypeExt8db,                                      ///< Extended 8dB
+  MaxChannelType                                          ///< Not valid value, used to verify input
+} PCIE_CHANNEL_TYPE;
+
+/// PCIe link ASPM
+typedef enum {
+  AspmDisabled,                                           ///< Disabled
+  AspmL0s,                                                ///< PCIe L0s link state
+  AspmL1,                                                 ///< PCIe L1 link state
+  AspmL0sL1,                                              ///< PCIe L0s & L1 link state
+  MaxAspm                                                 ///< Not valid value, used to verify input
+} PCIE_ASPM_TYPE;
+
+/// PCIe link hotplug support
+typedef enum {
+  HotplugDisabled,                                        ///< Hotplug disable
+  HotplugBasic,                                           ///< Basic Hotplug
+  HotplugServer,                                          ///< Server Hotplug
+  HotplugEnhanced,                                        ///< Enhanced
+  HotplugInboard,                                         ///< Inboard
+  MaxHotplug                                              ///< Not valid value, used to verify input
+} PCIE_HOTPLUG_TYPE;
+
+/// PCIe link initialization
+typedef enum {
+  PortDisabled,                                           ///< Disable
+  PortEnabled                                             ///< Enable
+} PCIE_PORT_ENABLE;
+
+/// DDI Aux channel
+typedef enum {
+  Aux1,                                                   ///< Aux1
+  Aux2,                                                   ///< Aux2
+  Aux3,                                                   ///< Aux3
+  Aux4,                                                   ///< Aux4
+  Aux5,                                                   ///< Aux5
+  Aux6,                                                   ///< Aux6
+  MaxAux                                                  ///< Not valid value, used to verify input
+} PCIE_AUX_TYPE;
+
+/// DDI Hdp Index
+typedef enum {
+  Hdp1,                                                   ///< Hdp1
+  Hdp2,                                                   ///< Hdp2
+  Hdp3,                                                   ///< Hdp3
+  Hdp4,                                                   ///< Hdp4
+  Hdp5,                                                   ///< Hdp5
+  Hdp6,                                                   ///< Hdp6
+  MaxHdp                                                  ///< Not valid value, used to verify input
+} PCIE_HDP_TYPE;
+
+// Macro for statically initialization of various structures
+#define  PCIE_ENGINE_DATA_INITIALIZER(mType, mStartLane, mEndLane) {mType, mStartLane, mEndLane}
+#define  PCIE_PORT_DATA_INITIALIZER(mPortPresent, mChannelType, mDevAddress, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId) \
+{mPortPresent, mChannelType, mDevAddress, 0, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap} }
+#define  PCIE_DDI_DATA_INITIALIZER(mConnectorType, mAuxIndex, mHpdIndex ) \
+{mConnectorType, mAuxIndex, mHpdIndex, {0, 0}, 0}
+#define  PCIE_DDI_DATA_INITIALIZER_V1(mConnectorType, mAuxIndex, mHpdIndex, mMapping0, mMapping1, mPNInversion) \
+{mConnectorType, mAuxIndex, mHpdIndex, {mMapping0, mMapping1}, mPNInversion}
+
+///IOMMU requestor ID
+typedef struct {
+  IN       UINT16     Bus       :8;                                ///< Bus
+  IN       UINT16     Device    :5;                                ///< Device
+  IN       UINT16     Function  :3;                                ///< Function
+} IOMMU_REQUESTOR_ID;
+
+/// IVMD exclusion range descriptor
+typedef struct {
+  IN       UINT32               Flags;                    /**< Descriptor flags
+                                                           * @li @b Flags[31] - Terminate descriptor array.
+                                                           * @li @b Flags[30] - Ignore descriptor.
+                                                           */
+  IN       IOMMU_REQUESTOR_ID   RequestorIdStart;         ///< Requestor ID start
+  IN       IOMMU_REQUESTOR_ID   RequestorIdEnd;           ///< Requestor ID end (use same as start for single ID)
+  IN       UINT64               RangeBaseAddress;         ///< Phisical base address of exclusion range
+  IN       UINT64               RangeLength;              ///< Length of exclusion range in bytes
+} IOMMU_EXCLUSION_RANGE_DESCRIPTOR;
+
+/*----------------------------------------------------------------------------
+ *   GNB configuration info
+ *----------------------------------------------------------------------------
+ */
+
+/// LVDS Misc Control Field
+typedef struct {
+  IN  UINT8     FpdiMode:1;          ///< This item configures LVDS 888bit panel mode
+                                     ///< @li FALSE = LVDS 888 panel in LDI mode
+                                     ///< @li TRUE =  LVDS 888 panel in FPDI mode
+                                     ///< @BldCfgItem{BLDCFG_LVDS_MISC_888_FPDI_MODE}
+  IN  UINT8     DlChSwap:1;          ///< This item configures LVDS panel lower and upper link mapping
+                                     ///< @li FALSE = Lower link and upper link not swap
+                                     ///< @li TRUE = Lower link and upper link are swapped
+                                     ///< @BldCfgItem{BLDCFG_LVDS_MISC_DL_CH_SWAP}
+  IN  UINT8     VsyncActiveLow:1;    ///< This item configures polarity of frame pulse encoded in lvds data stream
+                                     ///< @li FALSE = Active high Frame Pulse/Vsync
+                                     ///< @li TRUE = Active low Frame Pulse/Vsync
+                                     ///< @BldCfgItem{BLDCFG_LVDS_MISC_VSYNC_ACTIVE_LOW}
+  IN  UINT8     HsyncActiveLow:1;    ///< This item configures polarity of line pulse encoded in lvds data
+                                     ///< @li FALSE = Active high Line Pulse
+                                     ///< @li TRUE = Active low Line Pulse / Hsync
+                                     ///< @BldCfgItem{BLDCFG_LVDS_MISC_HSYNC_ACTIVE_LOW}
+  IN  UINT8     BLONActiveLow:1;     ///< This item configures polarity of signal sent to digital BLON output pin
+                                     ///< @li FALSE = Not inverted(active high)
+                                     ///< @li TRUE = Inverted (active low)
+                                     ///< @BldCfgItem{BLDCFG_LVDS_MISC_BLON_ACTIVE_LOW}
+  IN  UINT8     Reserved:3;          ///< Reserved
+} LVDS_MISC_CONTROL_FIELD;
+
+/// LVDS Misc Control
+typedef union _LVDS_MISC_CONTROL {
+  IN LVDS_MISC_CONTROL_FIELD Field;  ///< LVDS_MISC_CONTROL_FIELD
+  IN UINT8   Value;                  ///< LVDS Misc Control Value
+} LVDS_MISC_CONTROL;
+
+/// Configuration settings for GNB.
+typedef struct {
+  IN  UINT8     Gnb3dStereoPinIndex;      ///< 3D Stereo Pin ID.
+                                          ///< @li 0 = Stereo 3D is disabled (default).
+                                          ///< @li 1 = Use processor pin HPD1.
+                                          ///< @li 2 = Use processor pin HPD2
+                                          ///< @li 3 = Use processor pin HPD3
+                                          ///< @li 4 = Use processor pin HPD4
+                                          ///< @li 5 = Use processor pin HPD5
+                                          ///< @li 6 = Use processor pin HPD6
+                                          ///< @BldCfgItem{BLDCFG_STEREO_3D_PINOUT}
+  IN  BOOLEAN    IommuSupport;            ///< IOMMU support.
+                                          ///< @li FALSE = Disabled. Disable and hide IOMMU device.
+                                          ///< @li TRUE  = Initialize IOMMU subsystem. Generate ACPI IVRS table.
+                                          ///< BldCfgItem{BLDCFG_IOMMU_SUPPORT}
+  IN  UINT16     LvdsSpreadSpectrum;      ///< Spread spectrum value in 0.01 %
+                                          ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM}
+  IN  UINT16     LvdsSpreadSpectrumRate;  ///< Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz
+                                          ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE}
+  IN  UINT8      LvdsPowerOnSeqDigonToDe;    ///< This item configures panel initialization timing.
+                                             ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE}
+  IN  UINT8      LvdsPowerOnSeqDeToVaryBl;   ///< This item configures panel initialization timing.
+                                             ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL}
+  IN  UINT8      LvdsPowerOnSeqDeToDigon;    ///< This item configures panel initialization timing.
+                                             ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON}
+  IN  UINT8      LvdsPowerOnSeqVaryBlToDe;   ///< This item configures panel initialization timing.
+                                             ///< @BldCfgItem{BLDCFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE}
+  IN  UINT8      LvdsPowerOnSeqOnToOffDelay; ///< This item configures panel initialization timing.
+                                             ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY}
+  IN  UINT8      LvdsPowerOnSeqVaryBlToBlon; ///< This item configures panel initialization timing.
+                                             ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON}
+  IN  UINT8      LvdsPowerOnSeqBlonToVaryBl; ///< This item configures panel initialization timing.
+                                             ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL}
+  IN  UINT16     LvdsMaxPixelClockFreq;      ///< This item configures the maximum pixel clock frequency supported.
+                                             ///< @BldCfgItem{BLDCFG_LVDS_MAX_PIXEL_CLOCK_FREQ}
+  IN  UINT32     LcdBitDepthControlValue;    ///< This item configures the LCD bit depth control settings.
+                                             ///< @BldCfgItem{BLDCFG_LCD_BIT_DEPTH_CONTROL_VALUE}
+  IN  UINT8      Lvds24bbpPanelMode;         ///< This item configures the LVDS 24 BBP mode.
+                                             ///< @BldCfgItem{BLDCFG_LVDS_24BBP_PANEL_MODE}
+  IN  LVDS_MISC_CONTROL      LvdsMiscControl;///< This item configures LVDS swap/Hsync/Vsync/BLON
+  IN  UINT16     PcieRefClkSpreadSpectrum;   ///< Spread spectrum value in 0.01 %
+                                             ///< @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM}
+  IN  BOOLEAN    GnbRemoteDisplaySupport;    ///< This item enables Wireless Display Support
+                                             ///< @li TRUE  = Enable Wireless Display Support
+                                             ///< @li FALSE = Disable Wireless Display Support
+                                             ///< @BldCfgItem{BLDCFG_REMOTE_DISPLAY_SUPPORT}
+} GNB_ENV_CONFIGURATION;
+
+/// GNB configuration info
+typedef struct {
+  IN       PCIe_COMPLEX_DESCRIPTOR  *PcieComplexList;  /**< Pointer to array of structures describe PCIe topology on each processor package or NULL.
+                                                        * Last element of array must ne terminated with DESCRIPTOR_TERMINATE_LIST
+                                                        * Example of topology definition for single socket system:
+                                                        * @code
+                                                        *  PCIe_PORT_DESCRIPTOR PortList [] = {
+                                                        *    // Initialize Port descriptor (PCIe port, Lanes 8:15, PCI Device Number 2, ...)
+                                                        *    {
+                                                        *      0,   //Descriptor flags
+                                                        *      PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 15),
+                                                        *      PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0)
+                                                        *    },
+                                                        *    // Initialize Port descriptor (PCIe port, Lanes 16:19, PCI Device Number 3, ...)
+                                                        *    {
+                                                        *      0,   //Descriptor flags
+                                                        *      PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 16, 19),
+                                                        *      PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 3, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0)
+                                                        *    },
+                                                        *    // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...)
+                                                        *    {
+                                                        *      DESCRIPTOR_TERMINATE_LIST, //Descriptor flags  !!!IMPORTANT!!! Terminate last element of array
+                                                        *      PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
+                                                        *      PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0)
+                                                        *    }
+                                                        *  };
+                                                        *  PCIe_PORT_DESCRIPTOR DdiList [] = {
+                                                        *    // Initialize Ddi descriptor (DDI interface Lanes 24:27, Display Port Connector, ...)
+                                                        *    {
+                                                        *      0,   //Descriptor flags
+                                                        *      PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 27),
+                                                        *      PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1, 0)
+                                                        *    },
+                                                        *    // Initialize Ddi descriptor (DDI interface Lanes 28:31, HDMI, ...)
+                                                        *    {
+                                                        *      DESCRIPTOR_TERMINATE_LIST, //Descriptor flags  !!!IMPORTANT!!! Terminate last element of array
+                                                        *      PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 28, 31),
+                                                        *      PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2, 0)
+                                                        *    }
+                                                        *  };
+                                                        * PCIe_COMPLEX_DESCRIPTOR PlatformTopology = {
+                                                        *   DESCRIPTOR_TERMINATE_LIST, //Descriptor flags  !!!IMPORTANT!!! Terminate complexes list
+                                                        *   0,  //Socket ID
+                                                        *   &PortList[0],
+                                                        *   &DdiList[0],
+                                                        * }
+                                                        * @endcode
+                                                        */
+  IN       UINT8                    PsppPolicy;         /**< PSPP (PCIe Speed Power Policy)
+                                                         *  @li @b 0 - Disabled
+                                                         *  @li @b 1 - Performance
+                                                         *  @li @b 2 - Balance-High
+                                                         *  @li @b 3 - Balance-Low
+                                                         *  @li @b 4 - Power Saving
+                                                         */
+
+} GNB_CONFIGURATION;
+//
+//  MEMORY-SPECIFIC DATA STRUCTURES
+//
+//
+//
+//
+// AGESA MAXIMIUM VALUES
+//
+//   These Max values are used to define array sizes and associated loop
+//   counts in the code.  They reflect the maximum values that AGESA
+//   currently supports and does not necessarily reflect the hardware
+//   capabilities of configuration.
+//
+
+#define MAX_SOCKETS_SUPPORTED   8   ///< Max number of sockets in system
+#define MAX_CHANNELS_PER_SOCKET 4   ///< Max Channels per sockets
+#define MAX_DIMMS_PER_CHANNEL   4   ///< Max DIMMs on a memory channel (independent of platform)
+#define NUMBER_OF_DELAY_TABLES  9   ///< Number of tables defined in CH_DEF_STRUCT.
+                                    ///< Eg: UINT16  *RcvEnDlys;
+                                    ///<     UINT8   *WrDqsDlys;
+                                    ///<     UINT8   *RdDqsDlys;
+                                    ///<     UINT8   *WrDatDlys;
+                                    ///<     UINT8   *RdDqsMinDlys;
+                                    ///<     UINT8   *RdDqsMaxDlys;
+                                    ///<     UINT8   *WrDatMinDlys;
+                                    ///<     UINT8   *WrDatMaxDlys;
+#define NUMBER_OF_FAILURE_MASK_TABLES 1 ///< Number of failure mask tables
+
+#define MAX_PLATFORM_TYPES     16   ///< Platform types per system
+
+#define MCT_TRNG_KEEPOUT_START  0x00004000    ///< base [39:8]
+#define MCT_TRNG_KEEPOUT_END    0x00007FFF    ///< base [39:8]
+
+#define UMA_ATTRIBUTE_INTERLEAVE 0x80000000   ///< Uma Region is interleaved
+#define UMA_ATTRIBUTE_ON_DCT0    0x40000000   ///< UMA resides on memory that belongs to DCT0
+#define UMA_ATTRIBUTE_ON_DCT1    0x20000000   ///< UMA resides on memory that belongs to DCT1
+
+typedef UINT8 PSO_TABLE;            ///< Platform Configuration Table
+
+//        AGESA DEFINITIONS
+//
+//        Many of these are derived from the platform and hardware specific definitions
+
+/// EccSymbolSize override value
+#define ECCSYMBOLSIZE_USE_BKDG      0   ///< Use BKDG Recommended Value
+#define ECCSYMBOLSIZE_FORCE_X4      4   ///< Force to x4
+#define ECCSYMBOLSIZE_FORCE_X8      8   ///< Force to x8
+/// CPU Package Type
+#define PT_L1       0                 ///< L1 Package type
+#define PT_M2       1                 ///< AM Package type
+#define PT_S1       2                 ///< S1 Package type
+
+/// Structures use to pass system Logical CPU-ID
+typedef struct {
+  IN OUT   UINT64 Family;             ///< Indicates logical ID Family
+  IN OUT   UINT64 Revision;           ///< Indicates logical ID Family
+} CPU_LOGICAL_ID;
+
+/// Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE
+typedef enum {
+  AMD_PLATFORM_SERVER = 0x8000,     ///< Server
+  AMD_PLATFORM_DESKTOP = 0x10000,   ///< Desktop
+  AMD_PLATFORM_MOBILE = 0x20000,    ///< Mobile
+} AMD_PLATFORM_TYPE;
+
+/// Dram technology type
+typedef enum {
+  DDR2_TECHNOLOGY,      ///< DDR2 technology
+  DDR3_TECHNOLOGY       ///< DDR3 technology
+} TECHNOLOGY_TYPE;
+
+/// Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT
+typedef enum {
+  DDR400_FREQUENCY = 200,     ///< DDR 400
+  DDR533_FREQUENCY = 266,     ///< DDR 533
+  DDR667_FREQUENCY = 333,     ///< DDR 667
+  DDR800_FREQUENCY = 400,     ///< DDR 800
+  DDR1066_FREQUENCY = 533,    ///< DDR 1066
+  DDR1333_FREQUENCY = 667,    ///< DDR 1333
+  DDR1600_FREQUENCY = 800,    ///< DDR 1600
+  DDR1866_FREQUENCY = 933,    ///< DDR 1866
+  DDR2100_FREQUENCY = 1050,   ///< DDR 2100
+  DDR2133_FREQUENCY = 1066,   ///< DDR 2133
+  DDR2400_FREQUENCY = 1200,   ///< DDR 2400
+  UNSUPPORTED_DDR_FREQUENCY   ///< Highest limit of DDR frequency
+} MEMORY_BUS_SPEED;
+
+/// Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE
+typedef enum {
+  QUADRANK_REGISTERED,        ///< Quadrank registered DIMM
+  QUADRANK_UNBUFFERED         ///< Quadrank unbuffered DIMM
+} QUANDRANK_TYPE;
+
+/// Build Configuration values for BLDCFG_TIMING_MODE_SELECT
+typedef enum {
+  TIMING_MODE_AUTO,           ///< Use best rate possible
+  TIMING_MODE_LIMITED,        ///< Set user top limit
+  TIMING_MODE_SPECIFIC        ///< Set user specified speed
+} USER_MEMORY_TIMING_MODE;
+
+/// Build Configuration values for BLDCFG_POWER_DOWN_MODE
+typedef enum {
+  POWER_DOWN_BY_CHANNEL,      ///< Channel power down mode
+  POWER_DOWN_BY_CHIP_SELECT,  ///< Chip select power down mode
+  POWER_DOWN_MODE_AUTO        ///< AGESA to select power down mode
+} POWER_DOWN_MODE;
+
+/// Low voltage support
+typedef enum {
+  VOLT_INITIAL,              ///< Initial value for VDDIO
+  VOLT1_5,                   ///< 1.5 Volt
+  VOLT1_35,                  ///< 1.35 Volt
+  VOLT1_25,                  ///< 1.25 Volt
+  VOLT_UNSUPPORTED = 0xFF    ///< No common voltage found
+} DIMM_VOLTAGE;
+
+/// UMA Mode
+typedef enum {
+  UMA_NONE = 0,              ///< UMA None
+  UMA_SPECIFIED = 1,         ///< UMA Specified
+  UMA_AUTO = 2               ///< UMA Auto
+} UMA_MODE;
+
+/// Force Training Mode
+typedef enum {
+  FORCE_TRAIN_1D = 0,              ///< 1D Training only
+  FORCE_TRAIN___ = 1,              ///<
+  FORCE_TRAIN_AUTO = 2             ///<  Auto
+} FORCE_TRAIN_MODE;
+
+///  The possible DRAM prefetch mode settings.
+typedef enum  {
+  DRAM_PREFETCHER_AUTO,                         ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+  DISABLE_DRAM_PREFETCH_FOR_IO,                 ///< Disable DRAM prefetching for I/O requests only.
+  DISABLE_DRAM_PREFETCH_FOR_CPU,                ///< Disable DRAM prefetching for requests from processor cores only.
+  DISABLE_DRAM_PREFETCHER,                      ///< Disable DRAM prefetching.
+  MAX_DRAM_FREFETCH_MODE                        ///< Not a DRAM prefetch mode, use for limit checking.
+} DRAM_PREFETCH_MODE;
+
+/// Build Configuration values for BLDCFG_UMA_ALIGNMENT
+typedef enum {
+  NO_UMA_ALIGNED = 0x00FFFFFF,           ///< NO UMA aligned
+  UMA_4MB_ALIGNED = 0x00FFFFC0,          ///< UMA 4MB aligned
+  UMA_128MB_ALIGNED = 0x00FFF800,        ///< UMA 128MB aligned
+  UMA_256MB_ALIGNED = 0x00FFF000,        ///< UMA 256MB aligned
+  UMA_512MB_ALIGNED = 0x00FFE000,        ///< UMA 512MB aligned
+} UMA_ALIGNMENT;
+
+///
+///   Global MCT Configuration Status Word (GStatus)
+///
+typedef enum {
+  GsbMTRRshort,              ///< Ran out of MTRRs while mapping memory
+  GsbAllECCDimms,            ///< All banks of all Nodes are ECC capable
+  GsbDramECCDis,             ///< Dram ECC requested but not enabled.
+  GsbSoftHole,               ///< A Node Base gap was created
+  GsbHWHole,                 ///< A HW dram remap was created
+  GsbNodeIntlv,              ///< Node Memory interleaving was enabled
+  GsbSpIntRemapHole,         ///< Special condition for Node Interleave and HW remapping
+  GsbEnDIMMSpareNW,          ///< Indicates that DIMM Spare can be used without a warm reset
+
+  GsbEOL                     ///< End of list
+} GLOBAL_STATUS_FIELD;
+
+///
+///   Local Error Status (DIE_STRUCT.ErrStatus[31:0])
+///
+typedef enum {
+  EsbNoDimms,                  ///< No DIMMs
+  EsbSpdChkSum,                ///< SPD Checksum fail
+  EsbDimmMismatchM,            ///< dimm module type(buffer) mismatch
+  EsbDimmMismatchT,            ///< dimm CL/T mismatch
+  EsbDimmMismatchO,            ///< dimm organization mismatch (128-bit)
+  EsbNoTrcTrfc,                ///< SPD missing Trc or Trfc info
+  EsbNoCycTime,                ///< SPD missing byte 23 or 25
+  EsbBkIntDis,                 ///< Bank interleave requested but not enabled
+  EsbDramECCDis,               ///< Dram ECC requested but not enabled
+  EsbSpareDis,                 ///< Online spare requested but not enabled
+  EsbMinimumMode,              ///< Running in Minimum Mode
+  EsbNoRcvrEn,                 ///< No DQS Receiver Enable pass window found
+  EsbSmallRcvr,                ///< DQS Rcvr En pass window too small (far right of dynamic range)
+  EsbNoDqsPos,                 ///< No DQS-DQ passing positions
+  EsbSmallDqs,                 ///< DQS-DQ passing window too small
+  EsbDCBKScrubDis,             ///< DCache scrub requested but not enabled
+
+  EsbEMPNotSupported,          ///< Processor is not capable for EMP.
+  EsbEMPConflict,               ///< EMP requested but cannot be enabled since
+                               ///< channel interleaving, bank interleaving, or bank swizzle is enabled.
+  EsbEMPDis,                   ///< EMP requested but cannot be enabled since
+                               ///< memory size of each DCT is not a power of two.
+
+  EsbEOL                       ///< End of list
+} ERROR_STATUS_FIELD;
+
+///
+///  Local Configuration Status (DIE_STRUCT.Status[31:0])
+///
+typedef enum {
+  SbRegistered,                ///< All DIMMs are Registered
+  SbEccDimms,                  ///< All banks ECC capable
+  SbParDimms,                  ///< All banks Addr/CMD Parity capable
+  SbDiagClks,                  ///< Jedec ALL slots clock enable diag mode
+  Sb128bitmode,                ///< DCT in 128-bit mode operation
+  Sb64MuxedMode,               ///< DCT in 64-bit mux'ed mode.
+  Sb2TMode,                    ///< 2T CMD timing mode is enabled.
+  SbSWNodeHole,                ///< Remapping of Node Base on this Node to create a gap.
+  SbHWHole,                    ///< Memory Hole created on this Node using HW remapping.
+  SbOver400Mhz,                ///< DCT freq greater than or equal to 400MHz flag
+  SbDQSPosPass2,               ///< Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz
+  SbDQSRcvLimit,               ///< Used for DQSRcvEnTrain to know we have reached the upper bound.
+  SbExtConfig,                 ///< Indicate the default setting for extended PCI configuration support
+  SbLrdimms,                   ///< All DIMMs are LRDIMMs
+
+  SbEOL                        ///< End of list
+} LOCAL_STATUS_FIELD;
+
+
+///< CPU MSR Register definitions ------------------------------------------
+#define SYS_CFG     0xC0010010
+//#define TOP_MEM     0xC001001A
+//#define TOP_MEM2    0xC001001D
+#ifndef TOP_MEM
+  #define TOP_MEM			0xC001001A
+#endif
+#ifndef TOP_MEM2
+  #define TOP_MEM2			0xC001001D
+#endif
+#define HWCR        0xC0010015
+#define NB_CFG      0xC001001F
+
+#define FS_BASE     0xC0000100
+#define IORR0_BASE  0xC0010016
+#define IORR0_MASK  0xC0010017
+#define BU_CFG      0xC0011023
+#define BU_CFG2     0xC001102A
+#define COFVID_STAT 0xC0010071
+#define TSC         0x10
+
+//-----------------------------------------------------------------------------
+///
+/// SPD Data for each DIMM.
+///
+typedef struct _SPD_DEF_STRUCT {
+  IN BOOLEAN DimmPresent;       ///< Indicates that the DIMM is present and Data is valid
+  IN UINT8 Data[256];           ///< Buffer for 256 Bytes of SPD data from DIMM
+} SPD_DEF_STRUCT;
+
+///
+/// Channel Definition Structure.
+/// This data structure defines entries that are specific to the channel initialization
+///
+typedef struct _CH_DEF_STRUCT {
+  OUT UINT8   ChannelID;         ///< Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D)
+  OUT TECHNOLOGY_TYPE TechType;  ///< Technology type of this channel
+  OUT UINT8   ChDimmPresent;     ///< For each bit n 0..7, 1 = DIMM n is present.
+                                 ///<  DIMM#  Select Signal
+                                 ///<  0      MA0_CS_L[0, 1]
+                                 ///<  1      MB0_CS_L[0, 1]
+                                 ///<  2      MA1_CS_L[0, 1]
+                                 ///<  3      MB1_CS_L[0, 1]
+                                 ///<  4      MA2_CS_L[0, 1]
+                                 ///<  5      MB2_CS_L[0, 1]
+                                 ///<  6      MA3_CS_L[0, 1]
+                                 ///<  7      MB3_CS_L[0, 1]
+
+  OUT struct _DCT_STRUCT *DCTPtr; ///< Pointer to the DCT data of this channel.
+  OUT struct _DIE_STRUCT *MCTPtr; ///< Pointer to the node data of this channel.
+  OUT SPD_DEF_STRUCT *SpdPtr;    ///< Pointer to the SPD data for this channel. (Setup by NB Constructor)
+  OUT SPD_DEF_STRUCT *DimmSpdPtr[MAX_DIMMS_PER_CHANNEL]; ///< Array of pointers to
+                                 ///<   SPD Data for each Dimm. (Setup by Tech Block Constructor)
+  OUT UINT8   ChDimmValid;       ///< For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved.
+                                 ///<
+  OUT UINT8   RegDimmPresent;    ///< For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved.
+  OUT UINT8   LrDimmPresent;     ///< For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved.
+  OUT UINT8   SODimmPresent;     ///< For each bit n 0..3, 1 = DIMM n is a SO-DIMM, where 4..7 are reserved.
+  OUT UINT8   Loads;             ///< Number of devices loading bus
+  OUT UINT8   Dimms;             ///< Number of DIMMs loading Channel
+  OUT UINT8   Ranks;             ///< Number of ranks loading Channel DATA
+  OUT BOOLEAN SlowMode;          ///< 1T or 2T CMD mode (slow access mode)
+                                 ///< FALSE = 1T
+                                 ///< TRUE = 2T
+  ///< The following pointers will be pointed to dynamically allocated buffers.
+  ///< Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below.
+  ///< Example: If DIMM and Byte based training, then
+  ///< XX is a value in Hex
+  ///<                        BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE
+  ///<  Row1 -  Logical DIMM0    XX      XX      XX      XX      XX      XX      XX      XX      XX
+  ///<  Row2 -  Logical DIMM1    XX      XX      XX      XX      XX      XX      XX      XX      XX
+  OUT UINT16  *RcvEnDlys;       ///< DQS Receiver Enable Delays
+  OUT UINT8   *WrDqsDlys;       ///< Write DQS delays (only valid for DDR3)
+  OUT UINT8   *RdDqsDlys;       ///< Read Dqs delays
+  OUT UINT8   *WrDatDlys;       ///< Write Data delays
+  OUT UINT8   *RdDqs__Dlys;     ///< Read DQS data
+  OUT UINT8   *RdDqsMinDlys;    ///< Minimum Window for Read DQS
+  OUT UINT8   *RdDqsMaxDlys;    ///< Maximum Window for Read DQS
+  OUT UINT8   *WrDatMinDlys;    ///< Minimum Window for Write data
+  OUT UINT8   *WrDatMaxDlys;    ///< Maximum Window for Write data
+  OUT UINT16  *RcvEnDlysMemPs1;       ///< DQS Receiver Enable Delays for Mem Pstate 1
+  OUT UINT8   *WrDqsDlysMemPs1;       ///< Write DQS delays (only valid for DDR3) for Mem Pstate 1
+  OUT UINT8   *RdDqsDlysMemPs1;       ///< Read Dqs delays for Memory Pstate 1
+  OUT UINT8   *WrDatDlysMemPs1;       ///< Write Data delays for Memory Pstate 1
+  OUT UINT8   *RdDqs__DlysMemPs1;     ///< Read DQS data for Memory Pstate 1
+  OUT UINT8   *RdDqsMinDlysMemPs1;    ///< Minimum Window for Read DQS for Memory Pstate 1
+  OUT UINT8   *RdDqsMaxDlysMemPs1;    ///< Maximum Window for Read DQS for Memory Pstate 1
+  OUT UINT8   *WrDatMinDlysMemPs1;    ///< Minimum Window for Write data for Memory Pstate 1
+  OUT UINT8   *WrDatMaxDlysMemPs1;    ///< Maximum Window for Write data for Memory Pstate 1
+  OUT UINT8   RowCount;         ///< Number of rows of the allocated buffer.
+  OUT UINT8   ColumnCount;      ///< Number of columns of the allocated buffer.
+  OUT UINT8   *FailingBitMask;    ///< Table of masks to Track Failing bits
+  OUT UINT8   *FailingBitMaskMemPs1;    ///< Table of masks to Track Failing bits for Memory Pstate 1
+  OUT UINT32  DctOdcCtl;          ///< Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h)
+  OUT UINT32  DctAddrTmg;         ///< Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h)
+  OUT UINT32  PhyRODTCSLow;       ///< Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h)
+  OUT UINT32  PhyRODTCSHigh;      ///< Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h)
+  OUT UINT32  PhyWODTCSLow;       ///< Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h)
+  OUT UINT32  PhyWODTCSHigh;      ///< Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183)
+  OUT UINT8   PhyWLODT[4];        ///< Write Levelization ODT Pattern for Dimm 0-3 (see BKDG FN2:Offset 9Ch, index 0x8[11:8])
+  OUT UINT16  DctEccDqsLike;      ///< DCT DQS ECC UINT8 like...
+  OUT UINT8   DctEccDqsScale;     ///< DCT DQS ECC UINT8 scale
+  OUT UINT16  PtrPatternBufA;     ///< Ptr on stack to aligned DQS testing pattern
+  OUT UINT16  PtrPatternBufB;     ///< Ptr on stack to aligned DQS testing pattern
+  OUT UINT8   ByteLane;           ///< Current UINT8 Lane (0..7)
+  OUT UINT8   Direction;          ///< Current DQS-DQ training write direction (0=read, 1=write)
+  OUT UINT8   Pattern;            ///< Current pattern
+  OUT UINT8   DqsDelay;           ///< Current DQS delay value
+  OUT UINT16  HostBiosSrvc1;      ///< UINT16 sized general purpose field for use by host BIOS.  Scratch space.
+  OUT UINT32  HostBiosSrvc2;      ///< UINT32 sized general purpose field for use by host BIOS.  Scratch space.
+  OUT UINT16  DctMaxRdLat[4];     ///< Max Read Latency (ns) for the DCT
+                                  ///< DctMaxRdLat [i] is for NBPstate i
+  OUT UINT8   DIMMValidCh;        ///< DIMM# in CH
+  OUT UINT8   MaxCh;              ///< Max number of CH in system
+  OUT UINT8   Dct;                ///< Dct pointer
+  OUT UINT8   WrDatGrossH;        ///< Write Data Gross delay high value
+  OUT UINT8   DqsRcvEnGrossL;     ///< DQS Receive Enable Gross Delay low
+
+  OUT UINT8   TrwtWB;             ///<  Non-SPD timing value for TrwtWB
+  OUT UINT8   CurrRcvrDctADelay;  ///< for keep current RcvrEnDly
+  OUT UINT16  T1000;              ///< get the T1000 figure (cycle time (ns) * 1K)
+  OUT UINT8   DqsRcvEnPass;       ///< for TrainRcvrEn UINT8 lane pass flag
+  OUT UINT8   DqsRcvEnSaved;      ///< for TrainRcvrEn UINT8 lane saved flag
+  OUT UINT8   SeedPass1Remainder; ///< for Phy assisted DQS receiver enable training
+
+  OUT UINT8   ClToNbFlag;         ///< is used to restore ClLinesToNbDis bit after memory
+  OUT UINT32  NodeSysBase;        ///< for channel interleave usage
+  OUT UINT8   RefRawCard[MAX_DIMMS_PER_CHANNEL];   ///< Array of rawcards detected
+  OUT UINT8   CtrlWrd02[MAX_DIMMS_PER_CHANNEL];    ///< Control Word 2 values per DIMM
+  OUT UINT8   CtrlWrd03[MAX_DIMMS_PER_CHANNEL];    ///< Control Word 3 values per DIMM
+  OUT UINT8   CtrlWrd04[MAX_DIMMS_PER_CHANNEL];    ///< Control Word 4 values per DIMM
+  OUT UINT8   CtrlWrd05[MAX_DIMMS_PER_CHANNEL];    ///< Control Word 5 values per DIMM
+  OUT UINT8   CtrlWrd08[MAX_DIMMS_PER_CHANNEL];    ///< Control Word 8 values per DIMM
+
+  OUT UINT16  CsPresentDCT;       ///< For each bit n 0..7, 1 = Chip-select n is present
+  OUT UINT8   DimmMirrorPresent;  ///< For each bit n 0..3, 1 = DIMM n is OnDimmMirror capable where 4..7 are reserved.
+  OUT UINT8   DimmSpdCse;         ///< For each bit n 0..3, 1 = DIMM n SPD checksum error where 4..7 are reserved.
+  OUT UINT8   DimmExclude;        ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved.
+  OUT UINT8   DimmYr06;           ///< Bitmap indicating which Dimms have a manufacturer's year code <= 2006
+  OUT UINT8   DimmWk2406;         ///< Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June)
+  OUT UINT8   DimmPlPresent;      ///< Bitmap indicating that Planar (1) or Stacked (0) Dimms are present.
+  OUT UINT8   DimmQrPresent;      ///< QuadRank DIMM present?
+  OUT UINT8   DimmDrPresent;      ///< Bitmap indicating that Dual Rank Dimms are present
+  OUT UINT8   DimmSRPresent;      ///< Bitmap indicating that Single Rank Dimms are present
+  OUT UINT8   Dimmx4Present;      ///< For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved.
+  OUT UINT8   Dimmx8Present;      ///< For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved.
+  OUT UINT8   Dimmx16Present;     ///< For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved.
+  OUT UINT8   LrdimmPhysicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of Physical Ranks for LRDIMMs
+  OUT UINT8   LrDimmLogicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of LRDIMM Logical ranks in this configuration
+  OUT UINT8   LrDimmRankMult[MAX_DIMMS_PER_CHANNEL];///< Rank Multipication factor per dimm.
+  OUT UINT8   DimmNibbleAccess;   ///< For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved.
+  OUT UINT8   *MemClkDisMap;      ///<  This pointer will be set to point to an array that describes
+                                  ///<  the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will
+                                  ///<  base on this array to disable unused MemClk to save power.
+                                  ///<
+                                  ///<  The array must have 8 entries. Each entry, which associates with
+                                  ///<  one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to.
+                                  ///<    Example:
+                                  ///<    BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package
+                                  ///<    is like below:
+                                  ///<         Bit AM3/S1g3 pin name
+                                  ///<         0   M[B,A]_CLK_H/L[0]
+                                  ///<         1   M[B,A]_CLK_H/L[1]
+                                  ///<         2   M[B,A]_CLK_H/L[2]
+                                  ///<         3   M[B,A]_CLK_H/L[3]
+                                  ///<         4   M[B,A]_CLK_H/L[4]
+                                  ///<         5   M[B,A]_CLK_H/L[5]
+                                  ///<         6   M[B,A]_CLK_H/L[6]
+                                  ///<         7   M[B,A]_CLK_H/L[7]
+                                  ///<    And platform has the following routing:
+                                  ///<         CS0   M[B,A]_CLK_H/L[4]
+                                  ///<         CS1   M[B,A]_CLK_H/L[2]
+                                  ///<         CS2   M[B,A]_CLK_H/L[3]
+                                  ///<         CS3   M[B,A]_CLK_H/L[5]
+                                  ///<    Then MemClkDisMap should be pointed to the following array:
+                                  ///<               CLK_2 CLK_3 CLK_4 CLK_5
+                                  ///<    0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00
+                                  ///<  Each entry of the array is the bitmask of 8 chip selects.
+
+  OUT UINT8   *CKETriMap;         ///<  This pointer will be set to point to an array that describes
+                                  ///<  the routing of CKE pins to the DIMMs' ranks.
+                                  ///<  The array must have 2 entries. Each entry, which associates with
+                                  ///<  one CKE pin, is a bitmap of 8 CS that that CKE is routed to.
+                                  ///<  AGESA will base on this array to disable unused CKE pins to save power.
+
+  OUT UINT8   *ODTTriMap;         ///<  This pointer will be set to point to an array that describes
+                                  ///<  the routing of ODT pins to the DIMMs' ranks.
+                                  ///<  The array must have 4 entries. Each entry, which associates with
+                                  ///<  one ODT pin, is a bitmap of 8 CS that that ODT is routed to.
+                                  ///<  AGESA will base on this array to disable unused ODT pins to save power.
+
+  OUT UINT8   *ChipSelTriMap;     ///<  This pointer will be set to point to an array that describes
+                                  ///<  the routing of chip select pins to the DIMMs' ranks.
+                                  ///<  The array must have 8 entries. Each entry is a bitmap of 8 CS.
+                                  ///<  AGESA will base on this array to disable unused Chip select pins to save power.
+
+  OUT BOOLEAN   ExtendTmp;        ///<  If extended temperature is supported on all dimms on a channel.
+
+  OUT UINT8   MaxVref;            ///<  Maximum Vref Value for channel
+
+  OUT UINT8   Reserved[100];      ///< Reserved
+} CH_DEF_STRUCT;
+
+///
+/// DCT Channel Timing Parameters.
+/// This data structure sets timings that are specific to the channel.
+///
+typedef struct _CH_TIMING_STRUCT {
+  OUT UINT16  DctDimmValid;       ///< For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved.
+  OUT UINT16  DimmMirrorPresent;  ///< For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved.
+  OUT UINT16  DimmSpdCse;         ///< For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved.
+  OUT UINT16  DimmExclude;        ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved.
+  OUT UINT16  CsPresent;          ///< For each bit n 0..7, 1=Chip-select n is present
+  OUT UINT16  CsEnabled;          ///< For each bit n 0..7, 1=Chip-select n is enabled
+  OUT UINT16  CsTestFail;         ///< For each bit n 0..7, 1=Chip-select n is present but disabled
+  OUT UINT16  CsTrainFail;        ///< Bitmap showing which chipselects failed training
+  OUT UINT16  DIMM1KPage;         ///< For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved
+  OUT UINT16  DimmQrPresent;      ///< QuadRank DIMM present?
+  OUT UINT16  DimmDrPresent;      ///< Bitmap indicating that Dual Rank Dimms are present , where 4..7 are reserved
+  OUT UINT8   DimmSRPresent;      ///< Bitmap indicating that Single Rank Dimms are present, where 4..7 are reserved
+  OUT UINT16  Dimmx4Present;      ///< For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved
+  OUT UINT16  Dimmx8Present;      ///< For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved
+  OUT UINT16  Dimmx16Present;     ///< For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved
+
+  OUT UINT16  DIMMTrcd;           ///< Minimax Trcd*40 (ns) of DIMMs
+  OUT UINT16  DIMMTrp;            ///< Minimax Trp*40 (ns) of DIMMs
+  OUT UINT16  DIMMTrtp;           ///< Minimax Trtp*40 (ns) of DIMMs
+  OUT UINT16  DIMMTras;           ///< Minimax Tras*40 (ns) of DIMMs
+  OUT UINT16  DIMMTrc;            ///< Minimax Trc*40 (ns) of DIMMs
+  OUT UINT16  DIMMTwr;            ///< Minimax Twr*40 (ns) of DIMMs
+  OUT UINT16  DIMMTrrd;           ///< Minimax Trrd*40 (ns) of DIMMs
+  OUT UINT16  DIMMTwtr;           ///< Minimax Twtr*40 (ns) of DIMMs
+  OUT UINT16  DIMMTfaw;           ///< Minimax Tfaw*40 (ns) of DIMMs
+  OUT UINT16  TargetSpeed;        ///< Target DRAM bus speed in MHz
+  OUT UINT16  Speed;              ///< DRAM bus speed in MHz
+                                  ///<  400 (MHz)
+                                  ///<  533 (MHz)
+                                  ///<  667 (MHz)
+                                  ///<  800 (MHz)
+                                  ///<  and so on...
+  OUT UINT8   CasL;               ///< CAS latency DCT setting (busclocks)
+  OUT UINT8   Trcd;               ///< DCT Trcd (busclocks)
+  OUT UINT8   Trp;                ///< DCT Trp (busclocks)
+  OUT UINT8   Trtp;               ///< DCT Trtp (busclocks)
+  OUT UINT8   Tras;               ///< DCT Tras (busclocks)
+  OUT UINT8   Trc;                ///< DCT Trc (busclocks)
+  OUT UINT8   Twr;                ///< DCT Twr (busclocks)
+  OUT UINT8   Trrd;               ///< DCT Trrd (busclocks)
+  OUT UINT8   Twtr;               ///< DCT Twtr (busclocks)
+  OUT UINT8   Tfaw;               ///< DCT Tfaw (busclocks)
+  OUT UINT8   Trfc0;              ///< DCT Logical DIMM0 Trfc
+                                  ///<  0 = 75ns (for 256Mb devs)
+                                  ///<  1 = 105ns (for 512Mb devs)
+                                  ///<  2 = 127.5ns (for 1Gb devs)
+                                  ///<  3 = 195ns (for 2Gb devs)
+                                  ///<  4 = 327.5ns (for 4Gb devs)
+  OUT UINT8   Trfc1;              ///< DCT Logical DIMM1 Trfc (see Trfc0 for format)
+  OUT UINT8   Trfc2;              ///< DCT Logical DIMM2 Trfc (see Trfc0 for format)
+  OUT UINT8   Trfc3;              ///< DCT Logical DIMM3 Trfc (see Trfc0 for format)
+  OUT UINT32  DctMemSize;         ///< Base[47:16], total DRAM size controlled by this DCT.
+                                  ///<
+  OUT BOOLEAN SlowMode;           ///< 1T or 2T CMD mode (slow access mode)
+                                  ///< FALSE = 1T
+                                  ///< TRUE = 2T
+  OUT UINT8   TrwtTO;             ///< DCT TrwtTO (busclocks)
+  OUT UINT8   Twrrd;              ///< DCT Twrrd (busclocks)
+  OUT UINT8   Twrwr;              ///< DCT Twrwr (busclocks)
+  OUT UINT8   Trdrd;              ///< DCT Trdrd (busclocks)
+  OUT UINT8   TrwtWB;             ///< DCT TrwtWB (busclocks)
+  OUT UINT8   TrdrdSD;            ///< DCT TrdrdSD (busclocks)
+  OUT UINT8   TwrwrSD;            ///< DCT TwrwrSD (busclocks)
+  OUT UINT8   TwrrdSD;            ///< DCT TwrrdSD (busclocks)
+  OUT UINT16  MaxRdLat;           ///< Max Read Latency
+  OUT UINT8   WrDatGrossH;        ///< Temporary variables must be removed
+  OUT UINT8   DqsRcvEnGrossL;     ///< Temporary variables must be removed
+} CH_TIMING_STRUCT;
+
+///
+/// Data for each DCT.
+/// This data structure defines data used to configure each DRAM controller.
+///
+typedef struct _DCT_STRUCT {
+  OUT UINT8   Dct;                ///< Current Dct
+  OUT CH_TIMING_STRUCT Timings;   ///< Channel Timing structure
+  OUT CH_TIMING_STRUCT *TimingsMemPs1;   ///< Pointed to channel timing structure for memory Pstate 1
+  OUT CH_DEF_STRUCT    *ChData;   ///< Pointed to a dynamically allocated array of Channel structures
+  OUT UINT8   ChannelCount;       ///< Number of channel per this DCT
+  OUT BOOLEAN BkIntDis;           ///< Bank interleave requested but not enabled on current DCT
+} DCT_STRUCT;
+
+
+///
+/// Data Structure defining each Die.
+/// This data structure contains information that is used to configure each Die.
+///
+typedef struct _DIE_STRUCT {
+
+  /// Advanced:
+
+  OUT UINT8   NodeId;              ///< Node ID of current controller
+  OUT UINT8   SocketId;            ///< Socket ID of this Die
+  OUT UINT8   DieId;               ///< ID of this die relative to the socket
+  OUT PCI_ADDR      PciAddr;       ///< Pci bus and device number of this controller.
+  OUT AGESA_STATUS  ErrCode;       ///< Current error condition of Node
+                                   ///<  0x0 = AGESA_SUCCESS
+                                   ///<  0x1 = AGESA_UNSUPPORTED
+                                   ///<  0x2 = AGESA_BOUNDS_CHK
+                                   ///<  0x3 = AGESA_ALERT
+                                   ///<  0x4 = AGESA_WARNING
+                                   ///<  0x5 = AGESA_ERROR
+                                   ///<  0x6 = AGESA_CRITICAL
+                                   ///<  0x7 = AGESA_FATAL
+                                   ///<
+  OUT BOOLEAN ErrStatus[EsbEOL];   ///< Error Status bit Field
+                                   ///<
+  OUT BOOLEAN Status[SbEOL];       ///< Status bit Field
+                                   ///<
+  OUT UINT32  NodeMemSize;         ///< Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node.
+                                   ///<
+  OUT UINT32  NodeSysBase;         ///< Base[47:16] (system address) DRAM base address of this Node.
+                                   ///<
+  OUT UINT32  NodeHoleBase;        ///< If not zero, Base[47:16] (system address) of dram hole for HW remapping.  Dram hole exists on this Node
+                                   ///<
+  OUT UINT32  NodeSysLimit;        ///< Base[47:16] (system address) DRAM limit address of this Node.
+                                   ///<
+  OUT UINT32  DimmPresent;         ///< For each bit n 0..7, 1 = DIMM n is present.
+                                   ///<   DIMM#  Select Signal
+                                   ///<   0      MA0_CS_L[0, 1]
+                                   ///<   1      MB0_CS_L[0, 1]
+                                   ///<   2      MA1_CS_L[0, 1]
+                                   ///<   3      MB1_CS_L[0, 1]
+                                   ///<   4      MA2_CS_L[0, 1]
+                                   ///<   5      MB2_CS_L[0, 1]
+                                   ///<   6      MA3_CS_L[0, 1]
+                                   ///<   7      MB3_CS_L[0, 1]
+                                   ///<
+  OUT UINT32  DimmValid;           ///< For each bit n 0..7, 1 = DIMM n is valid and is / will be configured
+  OUT UINT32  RegDimmPresent;      ///< For each bit n 0..7, 1 = DIMM n is registered DIMM
+  OUT UINT32  LrDimmPresent;       ///< For each bit n 0..7, 1 = DIMM n is Load Reduced DIMM
+  OUT UINT32  DimmEccPresent;      ///< For each bit n 0..7, 1 = DIMM n is ECC capable.
+  OUT UINT32  DimmParPresent;      ///< For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable.
+                                   ///<
+  OUT UINT16  DimmTrainFail;       ///< Bitmap showing which dimms failed training
+  OUT UINT16  ChannelTrainFail;    ///< Bitmap showing the channel information about failed Chip Selects
+                                   ///<  0 in any bit field indicates Channel 0
+                                   ///<  1 in any bit field indicates Channel 1
+  OUT UINT8   Dct;                 ///<  Need to be removed
+                                   ///<  DCT pointer
+  OUT BOOLEAN GangedMode;          ///< Ganged mode
+                                   ///<  0 = disabled
+                                   ///<  1 = enabled
+  OUT CPU_LOGICAL_ID LogicalCpuid; ///< The logical CPUID of the node
+                                   ///<
+  OUT UINT16  HostBiosSrvc1;       ///< UINT16 sized general purpose field for use by host BIOS.  Scratch space.
+                                   ///<
+  OUT UINT32  HostBiosSrvc2;       ///< UINT32 sized general purpose field for use by host BIOS.  Scratch space.
+                                   ///<
+  OUT UINT8   MLoad;               ///< Need to be removed
+                                   ///< Number of devices loading MAA bus
+                                   ///<
+  OUT UINT8   MaxAsyncLat;         ///< Legacy wrapper
+                                   ///<
+  OUT UINT8   ChbD3Rcvrdly;        ///< Legacy wrapper
+                                   ///<
+  OUT UINT16  ChaMaxRdLat;         ///< Max Read Latency (ns) for DCT 0
+                                   ///<
+  OUT UINT8   ChbD3BcRcvrdly;      ///< CHB DIMM 3 Check UINT8 Receiver Enable Delay
+
+  OUT DCT_STRUCT *DctData;         ///< Pointed to a dynamically allocated array of DCT_STRUCTs
+  OUT UINT8   DctCount;            ///< Number of DCTs per this Die
+  OUT UINT8   Reserved[16];        ///< Reserved
+} DIE_STRUCT;
+
+/**********************************************************************
+ * S3 Support structure
+ **********************************************************************/
+/// AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure
+typedef struct {
+     OUT   UINT32 Signature;           ///< "ASTR" for AMD Suspend-To-RAM
+     OUT   UINT16 Version;             ///< S3 Params version number
+  IN OUT   UINT32 Flags;               ///< Indicates operation
+  IN OUT   VOID   *NvStorage;          ///< Pointer to memory critical save state data
+  IN OUT   UINT32 NvStorageSize;       ///< Size in bytes of the NvStorage region
+  IN OUT   VOID   *VolatileStorage;    ///< Pointer to remaining AMD save state data
+  IN OUT   UINT32 VolatileStorageSize; ///< Size in bytes of the VolatileStorage region
+} AMD_S3_PARAMS;
+
+///===============================================================================
+/// MEM_PARAMETER_STRUCT
+/// This data structure is used to pass wrapper parameters to the memory configuration code
+///
+typedef struct _MEM_PARAMETER_STRUCT {
+
+  // Basic (Return parameters)
+  // (This section contains the outbound parameters from the memory init code)
+
+  OUT BOOLEAN GStatus[GsbEOL];    ///< Global Status bitfield.
+                                  ///<
+  OUT UINT32 HoleBase;            ///< If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping.
+                                  ///<
+  OUT UINT32 Sub4GCacheTop;       ///< If not zero, the 32-bit top of cacheable memory.
+                                  ///<
+  OUT UINT32 Sub1THoleBase;       ///< If not zero Base[47:16] (system address) of sub 1TB dram hole.
+                                  ///<
+  OUT UINT32 SysLimit;            ///< Limit[47:16] (system address).
+                                  ///<
+  OUT DIMM_VOLTAGE DDR3Voltage;   ///< Find support voltage and send back to platform BIOS.
+                                  ///<
+  OUT UINT8 ExternalVrefValue;    ///< Target reference voltage for external Vref for training
+                                  ///<
+  OUT struct _MEM_DATA_STRUCT *MemData;   ///< Access to global memory init data.
+
+  //  Advanced (Optional parameters)
+  //  Optional (all defaults values will be initialized by the
+  //  'AmdMemInitDataStructDef' based on AMD defaults. It is up
+  //  to the IBV/OEM to change the defaults after initialization
+  //  but prior to the main entry to the memory code):
+
+  // Memory Map/Mgt.
+
+  IN UINT16  BottomIo;             ///< Bottom of 32-bit IO space (8-bits).
+                                   ///<   NV_BOTTOM_IO[7:0]=Addr[31:24]
+                                   ///<
+  IN BOOLEAN MemHoleRemapping;     ///< Memory Hole Remapping (1-bit).
+                                   ///<  FALSE = disable
+                                   ///<  TRUE  = enable
+                                   ///<
+  IN BOOLEAN LimitMemoryToBelow1Tb;///< Limit memory address space to below 1 TB
+                                   ///<  FALSE = disable
+                                   ///<  TRUE  = enable
+                                   ///<
+                                   ///< @BldCfgItem{BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB}
+
+
+  // Dram Timing
+
+  IN USER_MEMORY_TIMING_MODE   UserTimingMode;  ///< User Memclock Mode.
+                                                ///< @BldCfgItem{BLDCFG_TIMING_MODE_SELECT}
+
+  IN MEMORY_BUS_SPEED          MemClockValue;   ///< Memory Clock Value.
+                                                ///< @BldCfgItem{BLDCFG_MEMORY_CLOCK_SELECT}
+
+
+  // Dram Configuration
+
+  IN BOOLEAN EnableBankIntlv;      ///< Dram Bank (chip-select) Interleaving (1-bit).
+                                   ///<  - FALSE =disable (default)
+                                   ///<  - TRUE = enable
+                                   ///<
+                                   ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING}
+
+  IN BOOLEAN EnableNodeIntlv;      ///< Node Memory Interleaving (1-bit).
+                                   ///<   - FALSE = disable (default)
+                                   ///<   - TRUE = enable
+                                   ///<
+                                   ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING}
+
+  IN BOOLEAN EnableChannelIntlv;   ///< Channel Interleaving (1-bit).
+                                   ///<   - FALSE = disable (default)
+                                   ///<   - TRUE = enable
+                                   ///<
+                                   ///< @BldCfgItem{BLDCFG_MEMORY_CHANNEL_INTERLEAVING}
+  // ECC
+
+  IN BOOLEAN EnableEccFeature;     ///< enable ECC error to go into MCE.
+                                   ///<   - FALSE = disable (default)
+                                   ///<   - TRUE = enable
+                                   ///<
+                                   ///< @BldCfgItem{BLDCFG_ENABLE_ECC_FEATURE}
+  // Dram Power
+
+  IN BOOLEAN EnablePowerDown;      ///< CKE based power down mode (1-bit).
+                                   ///<   - FALSE =disable (default)
+                                   ///<   - TRUE =enable
+                                   ///<
+                                   ///< @BldCfgItem{BLDCFG_MEMORY_POWER_DOWN}
+
+  // Online Spare
+
+  IN BOOLEAN EnableOnLineSpareCtl; ///< Chip Select Spare Control bit 0.
+                                   ///<  - FALSE = disable Spare (default)
+                                   ///<  - TRUE = enable Spare
+                                   ///<
+                                   ///< @BldCfgItem{BLDCFG_ONLINE_SPARE}
+
+  IN UINT8 *TableBasedAlterations; ///< Desired modifications to register settings.
+
+  IN PSO_TABLE *PlatformMemoryConfiguration;
+                                   ///< A table that contains platform specific settings.
+                                   ///< For example, MemClk routing, the number of DIMM slots per channel, ....
+                                   ///< AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that
+                                   ///< contains default conservative settings. Platform BIOS can either tweak
+                                   ///< DefaultPlatformMemoryConfiguration or reassign this pointer to its own table.
+                                   ///<
+  IN BOOLEAN EnableParity;         ///< Parity control.
+                                   ///<  - TRUE = enable
+                                   ///<  - FALSE = disable (default)
+                                   ///<
+                                   ///< @BldCfgItem{BLDCFG_MEMORY_PARITY_ENABLE}
+
+  IN BOOLEAN EnableBankSwizzle;    ///< BankSwizzle control.
+                                   ///<  - FALSE = disable
+                                   ///<  - TRUE = enable  (default)
+                                   ///<
+                                   ///< @BldCfgItem{BLDCFG_BANK_SWIZZLE}
+
+                                   ///<
+
+  IN BOOLEAN EnableMemClr;         ///< Memory Clear functionality control.
+                                   ///<  - FALSE = disable
+                                   ///<  - TRUE = enable  (default)
+                                   ///<
+
+  // Uma Configuration
+
+  IN UMA_MODE UmaMode;             ///<  Uma Mode
+                                   ///<  0 = None
+                                   ///<  1 = Specified
+                                   ///<  2 = Auto
+  IN OUT UINT32 UmaSize;           ///<  The size of shared graphics dram (16-bits)
+                                   ///<  NV_UMA_Size[31:0]=Addr[47:16]
+                                   ///<
+  OUT UINT32 UmaBase;              ///<  The allocated Uma base address (32-bits)
+                                   ///<  NV_UMA_Base[31:0]=Addr[47:16]
+                                   ///<
+
+  /// Memory Restore Feature
+
+  IN BOOLEAN MemRestoreCtl;        ///< Memory context restore control
+                                   ///<   FALSE = perform memory init as normal (AMD default)
+                                   ///<   TRUE = restore memory context and skip training. This requires
+                                   ///<          MemContext is valid before AmdInitPost
+                                   ///<
+  IN BOOLEAN SaveMemContextCtl;    ///< Control switch to save memory context at the end of MemAuto
+                                   ///<   TRUE = AGESA will setup MemContext block before exit AmdInitPost
+                                   ///<   FALSE = AGESA will not setup MemContext block. Platform is
+                                   ///<           expected to call S3Save later in POST if it wants to
+                                   ///<           use memory context restore feature.
+                                   ///<
+  IN OUT AMD_S3_PARAMS MemContext; ///< Memory context block describes the data that platform needs to
+                                   ///< save and restore for memory context restore feature to work.
+                                   ///< It uses the subset of S3Save block to save/restore. Hence platform
+                                   ///< may save only S3 block and uses it for both S3 resume and
+                                   ///< memory context restore.
+                                   ///<  - If MemRestoreCtl is TRUE, platform needs to pass in MemContext
+                                   ///<    before AmdInitPost.
+                                   ///<  - If SaveMemContextCtl is TRUE, platform needs to save MemContext
+                                   ///<    right after AmdInitPost.
+                                   ///<
+  IN BOOLEAN ExternalVrefCtl;      ///< Control the use of external Vref
+                                   ///<   TRUE = AGESA will use the function defined in "AGESA_EXTERNAL_VREF_CHANGE" in function list
+                                   ///<          to change the vref
+                                   ///<   FALSE = AGESA will will use the internal vref control.
+                                   ///< @BldCfgItem{BLDCFG_ENABLE_EXTERNAL_VREF_FEATURE}
+                                   ///<
+  IN FORCE_TRAIN_MODE ForceTrainMode;   ///<  Training Mode
+                                   ///<  0 = Force 1D Training for all configurations
+                                   ///<  1 = Force training for all configurations
+                                   ///<  2 = Auto - AGESA will control
+} MEM_PARAMETER_STRUCT;
+
+
+///
+/// Function definition.
+/// This data structure passes function pointers to the memory configuration code.
+/// The wrapper can use this structure with customized versions.
+///
+typedef struct _MEM_FUNCTION_STRUCT {
+
+  // PUBLIC required Internal functions
+
+  IN OUT BOOLEAN (*amdMemGetPsCfgU) ( VOID *pMemData);  ///< Proc for Unbuffered DIMMs, platform specific
+  IN OUT BOOLEAN (*amdMemGetPsCfgR) (VOID *pMemData);   ///< Proc for Registered DIMMs, platform specific
+
+  // PUBLIC optional functions
+
+  IN OUT VOID (*amdMemEccInit) (VOID *pMemData);                  ///< NB proc for ECC feature
+  IN OUT VOID (*amdMemChipSelectInterleaveInit) (VOID *pMemData); ///< NB proc for CS interleave feature
+  IN OUT VOID (*amdMemDctInterleavingInit) (VOID *pMemData);      ///< NB proc for Channel interleave feature
+  IN OUT VOID (*amdMemMctInterleavingInit) (VOID *pMemData);      ///< NB proc for Node interleave feature
+  IN OUT VOID (*amdMemParallelTraining) (VOID *pMemData);         ///< NB proc for parallel training feature
+  IN OUT VOID (*amdMemEarlySampleSupport) (VOID *pMemData);       ///< NB code for early sample support feature
+  IN OUT VOID (*amdMemMultiPartInitSupport) (VOID *pMemData);     ///< NB code for 'multi-part'
+  IN OUT VOID (*amdMemOnlineSpareSupport) (VOID *pMemData);       ///< NB code for On-Line Spare feature
+  IN OUT VOID (*amdMemUDimmInit) (VOID *pMemData);                ///< NB code for UDIMMs
+  IN OUT VOID (*amdMemRDimmInit) (VOID *pMemData);                ///< NB code for RDIMMs
+  IN OUT VOID (*amdMemLrDimmInit) (VOID *pMemData);               ///< NB code for LRDIMMs
+  IN OUT UINT32   Reserved[100]; ///< Reserved for later function definition
+} MEM_FUNCTION_STRUCT;
+
+///
+/// Socket Structure
+///
+///
+typedef struct _MEM_SOCKET_STRUCT {
+  OUT VOID *ChannelPtr[MAX_CHANNELS_PER_SOCKET];  ///< Pointers to each channels training data
+
+  OUT VOID *TimingsPtr[MAX_CHANNELS_PER_SOCKET];  ///< Pointers to each channels timing data
+} MEM_SOCKET_STRUCT;
+
+///
+/// Contains all data relevant to Memory Initialization.
+///
+typedef struct _MEM_DATA_STRUCT {
+  IN AMD_CONFIG_PARAMS StdHeader;             ///< Standard configuration header
+
+  IN MEM_PARAMETER_STRUCT *ParameterListPtr;  ///< List of input Parameters
+
+  OUT MEM_FUNCTION_STRUCT FunctionList;       ///< List of function Pointers
+
+  IN OUT AGESA_STATUS (*GetPlatformCfg[MAX_PLATFORM_TYPES]) (struct _MEM_DATA_STRUCT *MemData, UINT8 SocketID, CH_DEF_STRUCT *CurrentChannel); ///< look-up platform info
+
+  IN OUT BOOLEAN (*ErrorHandling)(struct _DIE_STRUCT *MCTPtr, UINT8 DCT, UINT16 ChipSelMask, AMD_CONFIG_PARAMS *StdHeader); ///< Error Handling
+
+
+  OUT MEM_SOCKET_STRUCT SocketList[MAX_SOCKETS_SUPPORTED];  ///< Socket list for memory code.
+                                   ///< SocketList is a shortcut for IBVs to retrieve training
+                                   ///< and timing data for each channel indexed by socket/channel,
+                                   ///< eliminating their need to parse die/dct/channel etc.
+                                   ///< It contains pointers to the populated data structures for
+                                   ///< each channel and skips the channel structures that are
+                                   ///< unpopulated. In the case of channels sharing the same DCT,
+                                   ///< the pTimings pointers will point to the same DCT Timing data.
+
+  OUT DIE_STRUCT *DiesPerSystem;  ///< Pointed to an array of DIE_STRUCTs
+  OUT UINT8      DieCount;        ///< Number of MCTs in the system.
+
+  IN SPD_DEF_STRUCT *SpdDataStructure;              ///< Pointer to SPD Data structure
+
+  IN OUT  struct _PLATFORM_CONFIGURATION   *PlatFormConfig;    ///< Platform profile/build option config structure
+
+  IN OUT BOOLEAN IsFlowControlSupported;    ///< Indicates if flow control is supported
+
+  OUT UINT32 TscRate;             ///< The rate at which the TSC increments in megahertz.
+
+} MEM_DATA_STRUCT;
+
+///
+/// Uma Structure
+///
+///
+typedef struct _UMA_INFO {
+  OUT UINT64 UmaBase;          ///< UmaBase[63:0] = Addr[63:0]
+  OUT UINT32 UmaSize;          ///< UmaSize[31:0] = Addr[31:0]
+  OUT UINT32 UmaAttributes;    ///< Indicate the attribute of Uma
+  OUT UINT8 UmaMode;           ///< Indicate the mode of Uma
+  OUT UINT16 MemClock;         ///< Indicate memory running speed in MHz
+  OUT UINT8 Reserved[3];       ///< Reserved for future usage
+} UMA_INFO;
+
+/// Bitfield for ID
+typedef struct {
+  OUT UINT16 SocketId:8;       ///< Socket ID
+  OUT UINT16 ModuleId:8;       ///< Module ID
+} ID_FIELD;
+///
+/// Union for ID of socket and module that will be passed out in call out
+///
+typedef union {
+  OUT ID_FIELD IdField;         ///< Bitfield for ID
+  OUT UINT16 IdInformation;     ///< ID information for call out
+} ID_INFO;
+
+//  AGESA MEMORY ERRORS
+
+// AGESA_ALERT Memory Errors
+#define MEM_ALERT_USER_TMG_MODE_OVERRULED   0x04010000 ///< TIMING_MODE_SPECIFIC is requested but
+                                                       ///< cannot be applied to current configurations.
+#define MEM_ALERT_ORG_MISMATCH_DIMM 0x04010100          ///< DIMM organization miss-match
+#define MEM_ALERT_BK_INT_DIS 0x04010200                 ///< Bank interleaving disable for internal issue
+
+// AGESA_ERROR Memory Errors
+#define MEM_ERROR_NO_DQS_POS_RD_WINDOW 0x04010300     ///< No DQS Position window for RD DQS
+#define MEM_ERROR_SMALL_DQS_POS_RD_WINDOW 0x04020300  ///< Small DQS Position window for RD DQS
+#define MEM_ERROR_NO_DQS_POS_WR_WINDOW 0x04030300     ///< No DQS Position window for WR DQS
+#define MEM_ERROR_SMALL_DQS_POS_WR_WINDOW 0x04040300  ///< Small DQS Position window for WR DQS
+#define MEM_ERROR_DIMM_SPARING_NOT_ENABLED 0x04010500 ///< DIMM sparing has not been enabled for an internal issues
+#define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE 0x04050300 ///< Receive Enable value is too large
+#define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW 0x04060300 ///< There is no DQS receiver enable window
+#define MEM_ERROR_DRAM_ENABLED_TIME_OUT 0x04010600 ///< Time out when polling DramEnabled bit
+#define MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT 0x04010700 ///< Time out when polling DctAccessDone bit
+#define MEM_ERROR_SEND_CTRL_WORD_TIME_OUT 0x04010800 ///< Time out when polling SendCtrlWord bit
+#define MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT 0x04010900 ///< Time out when polling PrefDramTrainMode bit
+#define MEM_ERROR_ENTER_SELF_REF_TIME_OUT 0x04010A00 ///< Time out when polling EnterSelfRef bit
+#define MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT 0x04010B00 ///< Time out when polling FreqChgInProg bit
+#define MEM_ERROR_EXIT_SELF_REF_TIME_OUT 0x04020A00 ///< Time out when polling ExitSelfRef bit
+#define MEM_ERROR_SEND_MRS_CMD_TIME_OUT 0x04010C00 ///< Time out when polling SendMrsCmd bit
+#define MEM_ERROR_SEND_ZQ_CMD_TIME_OUT 0x04010D00 ///< Time out when polling SendZQCmd bit
+#define MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT 0x04010E00 ///< Time out when polling DctExtraAccessDone bit
+#define MEM_ERROR_MEM_CLR_BUSY_TIME_OUT 0x04010F00 ///< Time out when polling MemClrBusy bit
+#define MEM_ERROR_MEM_CLEARED_TIME_OUT 0x04020F00 ///< Time out when polling MemCleared bit
+#define MEM_ERROR_FLUSH_WR_TIME_OUT 0x04011000 ///< Time out when polling FlushWr bit
+#define MEM_ERROR_MAX_LAT_NO_WINDOW 0x04070300 ///< Fail to find pass during Max Rd Latency training
+#define MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL 0x04080300 ///< Fail to launch training code on an AP
+#define MEM_ERROR_PARALLEL_TRAINING_TIME_OUT 0x04090300 ///< Fail to finish parallel training
+#define MEM_ERROR_NO_ADDRESS_MAPPING 0x04011100 ///< No address mapping found for a dimm
+#define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT  0x040A0300 ///< There is no DQS receiver enable window and the value is equal to the largest value
+#define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE 0x040B0300 ///< Receive Enable value is too large and is 1 less than limit
+#define MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR  0x04011200    ///< SPD Checksum error for NV_SPDCHK_RESTRT
+#define MEM_ERROR_NO_CHIPSELECT 0x04011300              ///< No chipselects found
+#define MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM 0x04011500   ///< Unbuffered dimm is not supported at 333MHz
+#define MEM_ERROR_WL_PRE_OUT_OF_RANGE 0x040C0300   ///< Returned PRE value during write levelizzation was out of range
+#define MEM_ERROR_NO____RDDQS_WINDOW 0x040D0300           ///< No RdDqs Window
+#define MEM_ERROR_NO____RDDQS_HEIGHT 0x040E0300  ///< No RdDqs Height
+#define MEM_ERROR____DQS_ERROR  0x040F0300 ///< RdDqs Error
+#define MEM_ERROR_INVALID____RDDQS_VALUE  0x04022400 ///< RdDqs invalid value found
+#define MEM_ERROR____DQS_VREF_MARGIN_ERROR  0x04023400 ///< RdDqs Vef Margin error found
+#define MEM_ERROR_LR_IBT_NOT_FOUND  0x04013500 ///< No LR dimm IBT value is found
+#define MEM_ERROR_MR0_NOT_FOUND  0x04023500 ///< No MR0 value is found
+#define MEM_ERROR_ODT_PATTERN_NOT_FOUND  0x04033500 ///< No odt pattern value is found
+#define MEM_ERROR_RC2_IBT_NOT_FOUND  0x04043500 ///< No RC2 IBT value is found
+#define MEM_ERROR_RC10_OP_SPEED_NOT_FOUND  0x04053500 ///< No RC10 op speed is found
+#define MEM_ERROR_RTT_NOT_FOUND  0x04063500 ///< No RTT value is found
+#define MEM_ERROR_P___NOT_FOUND  0x04073500 ///< No training config value is found
+#define MEM_ERROR_SAO_NOT_FOUND  0x04083500 ///< No slow access mode, Address timing and Output driver compensation value is found
+#define MEM_ERROR_CLK_DIS_MAP_NOT_FOUND  0x04093500 ///< No CLK disable map is found
+#define MEM_ERROR_CKE_TRI_MAP_NOT_FOUND  0x040A3500 ///< No CKE tristate map is found
+#define MEM_ERROR_ODT_TRI_MAP_NOT_FOUND  0x040B3500 ///< No ODT tristate map is found
+#define MEM_ERROR_CS_TRI_MAP_NOT_FOUND  0x040C3500 ///< No CS tristate map is found
+#define MEM_ERROR_TRAINING_SEED_NOT_FOUND  0x040D3500 ///< No training seed is found
+
+// AGESA_WARNING Memory Errors
+#define MEM_WARNING_UNSUPPORTED_QRDIMM      0x04011600 ///< QR DIMMs detected but not supported
+#define MEM_WARNING_UNSUPPORTED_UDIMM       0x04021600 ///< U DIMMs detected but not supported
+#define MEM_WARNING_UNSUPPORTED_SODIMM      0x04031600 ///< SO-DIMMs detected but not supported
+#define MEM_WARNING_UNSUPPORTED_X4DIMM      0x04041600 ///< x4 DIMMs detected but not supported
+#define MEM_WARNING_UNSUPPORTED_RDIMM       0x04051600 ///< R DIMMs detected but not supported
+#define MEM_WARNING_UNSUPPORTED_LRDIMM      0x04061600 ///< LR DIMMs detected but not supported
+#define MEM_WARNING_EMP_NOT_SUPPORTED       0x04011700 ///< Processor is not capable for EMP
+#define MEM_WARNING_EMP_CONFLICT            0x04021700  ///< EMP cannot be enabled if channel interleaving,
+#define MEM_WARNING_EMP_NOT_ENABLED         0x04031700  ///< Memory size is not power of two.
+#define MEM_WARNING_ECC_DIS                 0x04041700  ///< ECC has been disabled as a result of an internal issue
+#define MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED 0x04011800  ///< Performance has been enabled, but battery life is preferred.
+                                                        ///< bank interleaving, or bank swizzle is enabled.
+#define MEM_WARNING_NO_SPDTRC_FOUND         0x04011900  ///< No Trc timing value found in SPD of a dimm.
+#define MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED 0x04012000    ///< Node Interleaveing Requested, but could not be enabled
+#define MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED 0x04012100 ///< Channel Interleaveing Requested, but could not be enabled
+#define MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED 0x04012200 ///< Bank Interleaveing Requested, but could not be enabled
+#define MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED 0x04012300 ///< Voltage 1.35 determined, but could not be supported
+#define MEM_WARNING_INITIAL_DDR3VOLT_NONZERO   0x04012400 ///< DDR3 voltage initial value is not 0
+#define MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO   0x04012500 ///< Cannot find a commonly supported VDDIO
+
+// AGESA_FATAL Memory Errors
+#define MEM_ERROR_MINIMUM_MODE 0x04011A00               ///< Running in minimum mode
+#define MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM 0x04011B00  ///< DIMM modules are miss-matched
+#define MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM 0x04011C00    ///< No DIMMs have been found
+#define MEM_ERROR_MISMATCH_DIMM_CLOCKS  0x04011D00      ///< DIMM clocks miss-matched
+#define MEM_ERROR_NO_CYC_TIME 0x04011E00                ///< No cycle time found
+#define MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS   0x04011F00 ///< Heap allocation error with dynamic storing of trained timings
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs   0x04021F00 ///< Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV   0x04031F00 ///< Heap allocation error with REMOTE_TRAINING_ENV
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_SPD     0x04041F00    ///< Heap allocation error for SPD data
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA     0x04051F00    ///< Heap allocation error for RECEIVED_DATA during parallel training
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS     0x04061F00    ///< Heap allocation error for S3 "SPECIAL_CASE_REGISTER"
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA     0x04071F00   ///< Heap allocation error for Training Data
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK     0x04081F00    ///< Heap allocation error for  DIMM Identify "MEM_NB_BLOCK
+#define MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM     0x04022300   ///< No Constructor for DIMM Identify
+#define MEM_ERROR_VDDIO_UNSUPPORTED      0x04022500     ///< VDDIO of the dimms on the board is not supported
+#define MEM_ERROR_HEAP_ALLOCATE_FOR___     0x040B1F00    ///< Heap allocation error for training data
+#define MEM_ERROR_HEAP_DEALLOCATE_FOR___     0x040C1F00    ///< Heap de-allocation error for training data
+
+// AGESA_CRITICAL Memory Errors
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3     0x04091F00    ///< Heap allocation error for DMI table for DDR3
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2     0x040A1F00    ///< Heap allocation error for DMI table for DDR2
+#define MEM_ERROR_UNSUPPORTED_DIMM_CONFIG              0x04011400    ///< Dimm population is not supported
+
+
+
+/*----------------------------------------------------------------------------
+ *
+ *                END OF MEMORY-SPECIFIC DATA STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+
+/*----------------------------------------------------------------------------
+ *
+ *                    CPU RELATED DEFINITIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+// CPU Event definitions.
+
+// Defines used to filter CPU events based on functional blocks
+#define CPU_EVENT_PM_EVENT_MASK                         0xFF00FF00
+#define CPU_EVENT_PM_EVENT_CLASS                        0x08000400
+
+//================================================================
+// CPU General events
+//    Heap allocation                     (AppFunction =      01h)
+#define CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT            0x08000100
+#define CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED           0x08010100
+#define CPU_ERROR_HEAP_IS_FULL                          0x08020100
+#define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED    0x08030100
+#define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT     0x08040100
+//    BrandId                             (AppFunction =      02h)
+#define CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE            0x08000200
+//    Micro code patch                    (AppFunction =      03h)
+#define CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED        0x08000300
+//    Power management                    (AppFunction =      04h)
+#define CPU_EVENT_PM_PSTATE_OVERCURRENT                 0x08000400
+#define CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT             0x08010400
+#define CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE             0x08020400
+#define CPU_ERROR_PM_NB_PSTATE_MISMATCH                 0x08030400
+//    Other CPU events                    (AppFunction =      05h)
+#define CPU_EVENT_BIST_ERROR                            0x08000500
+#define CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY              0x08010500
+#define CPU_EVENT_STACK_REENTRY                         0x08020500
+#define CPU_EVENT_CORE_NOT_IDENTIFIED                   0x08030500
+
+//=================================================================
+// CPU Feature events
+//    Execution cache                     (AppFunction =      21h)
+//        AGESA_CACHE_SIZE_REDUCED                            2101
+//        AGESA_CACHE_REGIONS_ACROSS_1MB                      2102
+//        AGESA_CACHE_REGIONS_ACROSS_4GB                      2103
+//        AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY                2104
+//        AGESA_CACHE_START_ADDRESS_LESS_D0000                2105
+//        AGESA_THREE_CACHE_REGIONS_ABOVE_1MB                 2106
+//        AGESA_DEALLOCATE_CACHE_REGIONS                      2107
+#define CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR      0x08002100
+//    Core Leveling                       (AppFunction =      22h)
+#define CPU_WARNING_ADJUSTED_LEVELING_MODE              0x08002200
+//    HT Assist                           (AppFunction =      23h)
+#define CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG            0x08002300
+
+// CPU Build Configuration structures and definitions
+
+/// Build Configuration structure for BLDCFG_AP_MTRR_SETTINGS
+typedef struct {
+  IN  UINT32 MsrAddr;     ///< Fixed-Sized MTRR address
+  IN  UINT64 MsrData;     ///< MTRR Settings
+} AP_MTRR_SETTINGS;
+
+#define AMD_AP_MTRR_FIX64k_00000    0x00000250
+#define AMD_AP_MTRR_FIX16k_80000    0x00000258
+#define AMD_AP_MTRR_FIX16k_A0000    0x00000259
+#define AMD_AP_MTRR_FIX4k_C0000     0x00000268
+#define AMD_AP_MTRR_FIX4k_C8000     0x00000269
+#define AMD_AP_MTRR_FIX4k_D0000     0x0000026A
+#define AMD_AP_MTRR_FIX4k_D8000     0x0000026B
+#define AMD_AP_MTRR_FIX4k_E0000     0x0000026C
+#define AMD_AP_MTRR_FIX4k_E8000     0x0000026D
+#define AMD_AP_MTRR_FIX4k_F0000     0x0000026E
+#define AMD_AP_MTRR_FIX4k_F8000     0x0000026F
+#define CPU_LIST_TERMINAL           0xFFFFFFFF
+
+/// Data structure for the Mapping Item between Unified ID for IDS Setup Option
+/// and the option value.
+///
+typedef struct {
+  IN    UINT16 IdsNvId;           ///< Unified ID for IDS Setup Option.
+  OUT UINT16 IdsNvValue;        ///< The value of IDS Setup Option.
+} IDS_NV_ITEM;
+
+/// Data Structure for IDS CallOut Function
+typedef struct {
+  IN    AMD_CONFIG_PARAMS StdHeader;        ///< Standard configuration header
+  IN    IDS_NV_ITEM *IdsNvPtr;              ///< Memory Pointer of IDS NV Table
+  IN OUT UINTN Reserved;              ///< reserved
+} IDS_CALLOUT_STRUCT;
+
+/************************************************************************
+ *
+ *  AGESA interface Call-Out function parameter structures
+ *
+ ***********************************************************************/
+
+/// Parameters structure for interface call-out AgesaAllocateBuffer
+typedef struct {
+  IN OUT    AMD_CONFIG_PARAMS   StdHeader;      ///< Standard configuration header
+  IN OUT    UINT32              BufferLength;   ///< Size of buffer to allocate
+  IN        UINT32              BufferHandle;   ///< Identifier or name for the buffer
+  OUT       VOID                *BufferPointer; ///< location of the created buffer
+} AGESA_BUFFER_PARAMS;
+
+/// Parameters structure for interface call-out AgesaRunCodeOnAp
+typedef struct {
+  IN OUT    AMD_CONFIG_PARAMS   StdHeader;            ///< Standard configuration header
+  IN        UINT32              FunctionNumber;       ///< Index of the procedure to execute
+  IN        VOID                *RelatedDataBlock;    ///< Location of data structure the procedure will use
+  IN        UINT32              RelatedBlockLength;   ///< Size of the related data block
+} AP_EXE_PARAMS;
+
+/// Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery
+typedef struct {
+  IN OUT    AMD_CONFIG_PARAMS   StdHeader;      ///< Standard configuration header
+  IN        UINT8               SocketId;       ///< Address of SPD - socket ID
+  IN        UINT8               MemChannelId;   ///< Address of SPD - memory channel ID
+  IN        UINT8               DimmId;         ///< Address of SPD - DIMM ID
+  IN OUT    UINT8               *Buffer;        ///< Location where to place the SPD content
+  IN OUT    MEM_DATA_STRUCT     *MemData;       ///< Location of the MemData structure, for reference
+} AGESA_READ_SPD_PARAMS;
+
+/// Buffer Handles
+typedef enum {
+  AMD_DMI_INFO_BUFFER_HANDLE = 0x000D000,       ///< Assign 0x000D000 buffer handle to DMI function
+  AMD_PSTATE_DATA_BUFFER_HANDLE,                ///< Assign 0x000D001 buffer handle to Pstate data
+  AMD_PSTATE_ACPI_BUFFER_HANDLE,                ///< Assign 0x000D002 buffer handle to Pstate table
+  AMD_BRAND_ID_BUFFER_HANDLE,                   ///< Assign 0x000D003 buffer handle to Brand ID
+  AMD_ACPI_SLIT_BUFFER_HANDLE,                  ///< Assign 0x000D004 buffer handle to SLIT function
+  AMD_SRAT_INFO_BUFFER_HANDLE,                  ///< Assign 0x000D005 buffer handle to SRAT function
+  AMD_WHEA_BUFFER_HANDLE,                       ///< Assign 0x000D006 buffer handle to WHEA function
+  AMD_S3_INFO_BUFFER_HANDLE,                    ///< Assign 0x000D007 buffer handle to S3 function
+  AMD_S3_NB_INFO_BUFFER_HANDLE,                 ///< Assign 0x000D008 buffer handle to S3 NB device info
+  AMD_ACPI_ALIB_BUFFER_HANDLE,                  ///< Assign 0x000D009 buffer handle to ALIB SSDT table
+  AMD_ACPI_IVRS_BUFFER_HANDLE                   ///< Assign 0x000D00A buffer handle to IOMMU IVRS table
+} AMD_BUFFER_HANDLE;
+/************************************************************************
+ *
+ *  AGESA interface Call-Out function prototypes
+ *
+ ***********************************************************************/
+
+VOID
+AgesaDoReset (
+  IN        UINTN               ResetType,
+  IN OUT    AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+AGESA_STATUS
+AgesaAllocateBuffer (
+  IN      UINTN                 FcnData,
+  IN OUT  AGESA_BUFFER_PARAMS   *AllocParams
+  );
+
+AGESA_STATUS
+AgesaDeallocateBuffer (
+  IN      UINTN                 FcnData,
+  IN OUT  AGESA_BUFFER_PARAMS   *DeallocParams
+  );
+
+AGESA_STATUS
+AgesaLocateBuffer (
+  IN      UINTN                 FcnData,
+  IN OUT  AGESA_BUFFER_PARAMS   *LocateParams
+  );
+
+AGESA_STATUS
+AgesaReadSpd (
+  IN        UINTN                 FcnData,
+  IN OUT    AGESA_READ_SPD_PARAMS *ReadSpd
+  );
+
+AGESA_STATUS
+AgesaReadSpdRecovery (
+  IN        UINTN                 FcnData,
+  IN OUT    AGESA_READ_SPD_PARAMS *ReadSpd
+  );
+
+AGESA_STATUS
+AgesaHookBeforeDramInitRecovery (
+  IN       UINTN           FcnData,
+  IN OUT   MEM_DATA_STRUCT *MemData
+  );
+
+AGESA_STATUS
+AgesaRunFcnOnAp (
+  IN        UINTN               ApicIdOfCore,
+  IN        AP_EXE_PARAMS       *LaunchApParams
+  );
+
+AGESA_STATUS
+AgesaHookBeforeDramInit (
+  IN        UINTN               SocketIdModuleId,
+  IN OUT    MEM_DATA_STRUCT     *MemData
+  );
+
+AGESA_STATUS
+AgesaHookBeforeDQSTraining (
+  IN        UINTN               SocketIdModuleId,
+  IN OUT    MEM_DATA_STRUCT     *MemData
+  );
+
+AGESA_STATUS
+AgesaHookBeforeExitSelfRefresh (
+  IN        UINTN               FcnData,
+  IN OUT    MEM_DATA_STRUCT     *MemData
+  );
+
+AGESA_STATUS
+AgesaPcieSlotResetControl (
+  IN      UINTN                 FcnData,
+  IN      PCIe_SLOT_RESET_INFO  *ResetInfo
+ );
+
+AGESA_STATUS
+AgesaFchOemCallout (
+  IN      VOID                  *FchData
+ );
+
+AGESA_STATUS
+AgesaExternal__TrainVrefChange (
+  IN        UINTN               SocketIdModuleId,
+  IN OUT    MEM_DATA_STRUCT     *MemData
+  );
+
+AGESA_STATUS
+AgesaGetIdsData  (
+  IN       UINTN              Data,
+  IN OUT   IDS_CALLOUT_STRUCT *IdsCalloutData
+  );
+/************************************************************************
+ *
+ *  AGESA interface structure definition and function prototypes
+ *
+ ***********************************************************************/
+
+/**********************************************************************
+ * Platform Configuration:  The parameters in boot branch function
+ **********************************************************************/
+
+///  The possible platform control flow settings.
+typedef enum  {
+  Nfcm,                                          ///< Normal Flow Control Mode.
+  UmaDr,                                         ///< UMA using Display Refresh flow control.
+  UmaIfcm,                                       ///< UMA using Isochronous Flow Control.
+  Ifcm,                                          ///< Isochronous Flow Control Mode (other than for UMA).
+  Iommu,                                         ///< An IOMMU is in use in the system.
+  MaxControlFlow                                 ///< Not a control flow mode, use for limit checking.
+} PLATFORM_CONTROL_FLOW;
+
+///  Platform Deemphasis Levels.
+///
+/// The deemphasis level is set for the receiver, based on link characterization.  The DCV level is
+/// set based on the level of the far transmitter.
+typedef enum {
+  DeemphasisLevelNone,                           ///< No Deemphasis.
+  DeemphasisLevelMinus3,                         ///< Minus 3 db deemphasis.
+  DeemphasisLevelMinus6,                         ///< Minus 6 db deemphasis.
+  DeemphasisLevelMinus8,                         ///< Minus 8 db deemphasis.
+  DeemphasisLevelMinus11,                        ///< Minus 11 db deemphasis.
+  DeemphasisLevelMinus11pre8,                    ///< Minus 11, Minus 8 precursor db deemphasis.
+  DcvLevelNone = 16,                             ///< No DCV Deemphasis.
+  DcvLevelMinus2,                                ///< Minus 2 db DCV deemphasis.
+  DcvLevelMinus3,                                ///< Minus 3 db DCV deemphasis.
+  DcvLevelMinus5,                                ///< Minus 5 db DCV deemphasis.
+  DcvLevelMinus6,                                ///< Minus 6 db DCV deemphasis.
+  DcvLevelMinus7,                                ///< Minus 7 db DCV deemphasis.
+  DcvLevelMinus8,                                ///< Minus 8 db DCV deemphasis.
+  DcvLevelMinus9,                                ///< Minus 9 db DCV deemphasis.
+  DcvLevelMinus11,                               ///< Minus 11 db DCV deemphasis.
+  MaxPlatformDeemphasisLevel                     ///< Not a deemphasis level, use for limit checking.
+} PLATFORM_DEEMPHASIS_LEVEL;
+
+///  Provide Deemphasis Levels for HT Links.
+///
+///  For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will
+///  be checked for a match.  The item matches for a Socket, Link if the link frequency is
+///  is in the inclusive range HighFreq:LoFreq.
+///  AGESA does not set deemphasis in IO devices, only in processors.
+
+typedef struct {
+  // Match fields
+  IN       UINT8 Socket;                                        ///< One Socket on which this Link is located
+  IN       UINT8 Link;                                          ///< The Link on this Processor.
+  IN       UINT8 LoFreq;                                        ///< If the link is set to this frequency or greater, apply these levels, and
+  IN       UINT8 HighFreq;                                      ///< If the link is set to this frequency or less, apply these levels.
+  // Value fields
+  IN       PLATFORM_DEEMPHASIS_LEVEL     ReceiverDeemphasis;    ///< The deemphasis level for this link
+  IN       PLATFORM_DEEMPHASIS_LEVEL     DcvDeemphasis;         ///< The DCV, or far transmitter deemphasis level.
+} CPU_HT_DEEMPHASIS_LEVEL;
+
+
+///  The possible hardware prefetch mode settings.
+typedef enum  {
+  HARDWARE_PREFETCHER_AUTO,                     ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+  DISABLE_L1_PREFETCHER,                        ///< Use the recommended settings for the hardware prefetcher, but disable L1 prefetching.
+  DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES,  ///< Use the recommended setting for the hardware prefetcher, but disable training on software prefetches.
+  DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES,  ///< Use the recommended settings for the hardware prefetcher, but disable both the L1 prefetcher and training on software prefetches.
+  DISABLE_HARDWARE_PREFETCH,                    ///< Disable hardware prefetching.
+  MAX_HARDWARE_PREFETCH_MODE                    ///< Not a hardware prefetch mode, use for limit checking.
+} HARDWARE_PREFETCH_MODE;
+
+///  The possible software prefetch mode settings.
+typedef enum  {
+  SOFTWARE_PREFETCHES_AUTO,                     ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+  DISABLE_SOFTWARE_PREFETCHES,                  ///< Disable software prefetches (convert software prefetch instructions to NOP).
+  MAX_SOFTWARE_PREFETCH_MODE                    ///< Not a software prefetch mode, use for limit checking.
+} SOFTWARE_PREFETCH_MODE;
+
+/// Advanced performance tunings, prefetchers.
+/// These settings provide for performance tuning to optimize for specific workloads.
+typedef struct {
+  IN HARDWARE_PREFETCH_MODE  HardwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the hardware prefetcher setting.
+  IN SOFTWARE_PREFETCH_MODE  SoftwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the software prefetch instructions.
+  IN DRAM_PREFETCH_MODE      DramPrefetchMode;     ///< This value provides for advanced performance tuning by controlling the DRAM prefetcher setting.
+} ADVANCED_PERFORMANCE_PROFILE;
+
+///  The possible platform power policy settings.
+typedef enum  {
+  Performance,                                   ///< Optimize for performance.
+  BatteryLife,                                   ///< Optimize for battery life.
+  MaxPowerPolicy                                 ///< Not a power policy mode, use for limit checking.
+} PLATFORM_POWER_POLICY;
+
+///  Platform performance settings for optimized settings.
+///  Several configuration settings for the processor depend upon other parts and
+///  general designer choices for the system. The determination of these data points
+///  is not standard for all platforms, so the host environment needs to provide these
+///  to specify how the system is to be configured.
+typedef struct {
+  IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode;    ///< The platform's control flow mode for optimum platform performance.
+                                                       ///< @BldCfgItem{BLDCFG_PLATFORM_CONTROL_FLOW_MODE}
+  IN BOOLEAN               UseHtAssist;                ///< HyperTransport link traffic optimization.
+                                                       ///< @BldCfgItem{BLDCFG_USE_HT_ASSIST}
+  IN BOOLEAN               UseAtmMode;                 ///< HyperTransport link traffic optimization.
+                                                       ///< @BldCfgItem{BLDCFG_USE_ATM_MODE}
+  IN BOOLEAN               Use32ByteRefresh;           ///< Display Refresh traffic generates 32 byte requests.
+                                                       ///< @BldCfgItem{BLDCFG_USE_32_BYTE_REFRESH}
+  IN BOOLEAN               UseVariableMctIsocPriority; ///< The Memory controller will be set to Variable Isoc Priority.
+                                                       ///< @BldCfgItem{BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY}
+  IN ADVANCED_PERFORMANCE_PROFILE AdvancedPerformanceProfile;   ///< The advanced platform performance settings.
+  IN PLATFORM_POWER_POLICY PlatformPowerPolicy;        ///< The platform's desired power policy
+                                                       ///< @BldCfgItem{BLDCFG_PLATFORM_POWER_POLICY_MODE}
+} PERFORMANCE_PROFILE;
+
+///  Platform settings that describe the voltage regulator modules of the system.
+///  Many power management settings are dependent upon the characteristics of the
+///  on-board voltage regulator module (VRM).  The host environment needs to provide
+///  these to specify how the system is to be configured.
+typedef struct {
+  IN UINT32  CurrentLimit;                         ///< Vrm Current Limit.
+                                                   ///< @BldCfgItem{BLDCFG_VRM_CURRENT_LIMIT}
+                                                   ///< @BldCfgItem{BLDCFG_VRM_NB_CURRENT_LIMIT}
+  IN UINT32  LowPowerThreshold;                    ///< Vrm Low Power Threshold.
+                                                   ///< @BldCfgItem{BLDCFG_VRM_LOW_POWER_THRESHOLD}
+                                                   ///< @BldCfgItem{BLDCFG_VRM_NB_LOW_POWER_THRESHOLD}
+  IN UINT32  SlewRate;                             ///< Vrm Slew Rate.
+                                                   ///< @BldCfgItem{BLDCFG_VRM_SLEW_RATE}
+                                                   ///< @BldCfgItem{BLDCFG_VRM_NB_SLEW_RATE}
+  IN UINT32  AdditionalDelay;                      ///< Vrm Additional Delay.
+                                                   ///< @BldCfgItem{BLDCFG_VRM_ADDITIONAL_DELAY}
+                                                   ///< @BldCfgItem{BLDCFG_VRM_NB_ADDITIONAL_DELAY}
+  IN BOOLEAN HiSpeedEnable;                        ///< Select high speed VRM.
+                                                   ///< @BldCfgItem{BLDCFG_VRM_HIGH_SPEED_ENABLE}
+                                                   ///< @BldCfgItem{BLDCFG_VRM_NB_HIGH_SPEED_ENABLE}
+  IN UINT32  InrushCurrentLimit;                   ///< Vrm Inrush Current Limit.
+                                                   ///< @BldCfgItem{BLDCFG_VRM_INRUSH_CURRENT_LIMIT}
+                                                   ///< @BldCfgItem{BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT}
+} PLATFORM_VRM_CONFIGURATION;
+
+///  The VRM types to characterize.
+typedef enum  {
+  CoreVrm,                                       ///< VDD plane.
+  NbVrm,                                         ///< VDDNB plane.
+  MaxVrmType                                     ///< Not a valid VRM type, use for limit checking.
+} PLATFORM_VRM_TYPE;
+
+
+/// FCH Platform Configuration Policy
+typedef struct {
+  IN UINT16     CfgSmbus0BaseAddress;             ///< SMBUS0 Controller Base Address
+  IN UINT16     CfgSmbus1BaseAddress;             ///< SMBUS1 Controller Base Address
+  IN UINT16     CfgSioPmeBaseAddress;             ///< I/O base address for LPC I/O target range
+  IN UINT16     CfgAcpiPm1EvtBlkAddr;             ///< I/O base address of ACPI power management Event Block
+  IN UINT16     CfgAcpiPm1CntBlkAddr;             ///< I/O base address of ACPI power management Control Block
+  IN UINT16     CfgAcpiPmTmrBlkAddr;              ///< I/O base address of ACPI power management Timer Block
+  IN UINT16     CfgCpuControlBlkAddr;             ///< I/O base address of ACPI power management CPU Control Block
+  IN UINT16     CfgAcpiGpe0BlkAddr;               ///< I/O base address of ACPI power management General Purpose Event Block
+  IN UINT16     CfgSmiCmdPortAddr;                ///< I/O base address of ACPI SMI Command Block
+  IN UINT16     CfgAcpiPmaCntBlkAddr;             ///< I/O base address of ACPI power management additional control block
+  IN UINT32     CfgGecShadowRomBase;              ///< 32-bit base address to the GEC shadow ROM
+  IN UINT32     CfgWatchDogTimerBase;             ///< Watchdog Timer base address
+  IN UINT32     CfgSpiRomBaseAddress;             ///< Base address for the SPI ROM controller
+  IN UINT32     CfgHpetBaseAddress;               ///< HPET MMIO base address
+  IN UINT32     CfgAzaliaSsid;                    ///< Subsystem ID of HD Audio controller
+  IN UINT32     CfgSmbusSsid;                     ///< Subsystem ID of SMBUS controller
+  IN UINT32     CfgIdeSsid;                       ///< Subsystem ID of IDE controller
+  IN UINT32     CfgSataAhciSsid;                  ///< Subsystem ID of SATA controller in AHCI mode
+  IN UINT32     CfgSataIdeSsid;                   ///< Subsystem ID of SATA controller in IDE mode
+  IN UINT32     CfgSataRaid5Ssid;                 ///< Subsystem ID of SATA controller in RAID5 mode
+  IN UINT32     CfgSataRaidSsid;                  ///< Subsystem ID of SATA controller in RAID mode
+  IN UINT32     CfgEhciSsid;                      ///< Subsystem ID of EHCI
+  IN UINT32     CfgOhciSsid;                      ///< Subsystem ID of OHCI
+  IN UINT32     CfgLpcSsid;                       ///< Subsystem ID of LPC ISA Bridge
+  IN UINT32     CfgSdSsid;                        ///< Subsystem ID of SecureDigital controller
+  IN UINT32     CfgXhciSsid;                      ///< Subsystem ID of XHCI
+  IN BOOLEAN    CfgFchPort80BehindPcib;           ///< Is port80 cycle going to the PCI bridge
+  IN BOOLEAN    CfgFchEnableAcpiSleepTrap;        ///< ACPI sleep SMI enable/disable
+  IN GPP_LINKMODE CfgFchGppLinkConfig;            ///< GPP link configuration
+  IN BOOLEAN    CfgFchGppPort0Present;            ///< Is FCH GPP port 0 present
+  IN BOOLEAN    CfgFchGppPort1Present;            ///< Is FCH GPP port 1 present
+  IN BOOLEAN    CfgFchGppPort2Present;            ///< Is FCH GPP port 2 present
+  IN BOOLEAN    CfgFchGppPort3Present;            ///< Is FCH GPP port 3 present
+  IN BOOLEAN    CfgFchGppPort0HotPlug;            ///< Is FCH GPP port 0 hotplug capable
+  IN BOOLEAN    CfgFchGppPort1HotPlug;            ///< Is FCH GPP port 1 hotplug capable
+  IN BOOLEAN    CfgFchGppPort2HotPlug;            ///< Is FCH GPP port 2 hotplug capable
+  IN BOOLEAN    CfgFchGppPort3HotPlug;            ///< Is FCH GPP port 3 hotplug capable
+
+  IN UINT8   CfgFchEsataPortBitMap;               ///< ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable
+  IN UINT8   CfgFchIrPinControl;                  ///< Register bitfield describing Infrared Pin Control:
+                                                  ///<   [0] - IR Enable 0
+                                                  ///<   [1] - IR Enable 1
+                                                  ///<   [2] - IR Tx0
+                                                  ///<   [3] - IR Tx1
+                                                  ///<   [4] - IR Open Drain
+                                                  ///<   [5] - IR Enable LED
+  IN SD_CLOCK_CONTROL CfgFchSdClockControl;       ///< FCH SD Clock Control
+  IN SCI_MAP_CONTROL  *CfgFchSciMapControl;       ///< FCH SCI Mapping Control
+  IN SATA_PHY_CONTROL *CfgFchSataPhyControl;      ///< FCH SATA PHY Control
+  IN GPIO_CONTROL     *CfgFchGpioControl;         ///< FCH GPIO Control
+} FCH_PLATFORM_POLICY;
+
+
+/// Build Option/Configuration Boolean Structure.
+typedef struct {
+  IN  AMD_CODE_HEADER VersionString;              ///< AMD embedded code version string
+
+  //Build Option Area
+  IN BOOLEAN OptionUDimms;                        ///< @ref BLDOPT_REMOVE_UDIMMS_SUPPORT "BLDOPT_REMOVE_UDIMMS_SUPPORT"
+  IN BOOLEAN OptionRDimms;                        ///< @ref BLDOPT_REMOVE_RDIMMS_SUPPORT "BLDOPT_REMOVE_RDIMMS_SUPPORT"
+  IN BOOLEAN OptionLrDimms;                      ///< @ref BLDOPT_REMOVE_LRDIMMS_SUPPORT "BLDOPT_REMOVE_LRDIMMS_SUPPORT"
+  IN BOOLEAN OptionEcc;                           ///< @ref BLDOPT_REMOVE_ECC_SUPPORT "BLDOPT_REMOVE_ECC_SUPPORT"
+  IN BOOLEAN OptionBankInterleave;                ///< @ref BLDOPT_REMOVE_BANK_INTERLEAVE "BLDOPT_REMOVE_BANK_INTERLEAVE"
+  IN BOOLEAN OptionDctInterleave;                 ///< @ref BLDOPT_REMOVE_DCT_INTERLEAVE "BLDOPT_REMOVE_DCT_INTERLEAVE"
+  IN BOOLEAN OptionNodeInterleave;                ///< @ref BLDOPT_REMOVE_NODE_INTERLEAVE "BLDOPT_REMOVE_NODE_INTERLEAVE"
+  IN BOOLEAN OptionParallelTraining;              ///< @ref BLDOPT_REMOVE_PARALLEL_TRAINING "BLDOPT_REMOVE_PARALLEL_TRAINING"
+  IN BOOLEAN OptionOnlineSpare;                   ///< @ref BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT "BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT"
+  IN BOOLEAN OptionMemRestore;                    ///< @ref BLDOPT_REMOVE_MEM_RESTORE_SUPPORT "BLDOPT_REMOVE_MEM_RESTORE_SUPPORT"
+  IN BOOLEAN OptionMultisocket;                   ///< @ref BLDOPT_REMOVE_MULTISOCKET_SUPPORT "BLDOPT_REMOVE_MULTISOCKET_SUPPORT"
+  IN BOOLEAN OptionAcpiPstates;                   ///< @ref BLDOPT_REMOVE_ACPI_PSTATES "BLDOPT_REMOVE_ACPI_PSTATES"
+  IN BOOLEAN OptionPStatesInHpcMode;              ///< @ref BLDCFG_PSTATE_HPC_MODE "BLDCFG_PSTATE_HPC_MODE"
+  IN BOOLEAN OptionSrat;                          ///< @ref BLDOPT_REMOVE_SRAT "BLDOPT_REMOVE_SRAT"
+  IN BOOLEAN OptionSlit;                          ///< @ref BLDOPT_REMOVE_SLIT "BLDOPT_REMOVE_SLIT"
+  IN BOOLEAN OptionWhea;                          ///< @ref BLDOPT_REMOVE_WHEA "BLDOPT_REMOVE_WHEA"
+  IN BOOLEAN OptionDmi;                           ///< @ref BLDOPT_REMOVE_DMI "BLDOPT_REMOVE_DMI"
+  IN BOOLEAN OptionEarlySamples;                  ///< @ref BLDOPT_REMOVE_EARLY_SAMPLES "BLDOPT_REMOVE_EARLY_SAMPLES"
+  IN BOOLEAN OptionAddrToCsTranslator;            ///< ADDR_TO_CS_TRANSLATOR
+
+  //Build Configuration Area
+  IN UINT64 CfgPciMmioAddress;                    ///< Pci Mmio Base Address to use for PCI Config accesses.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_BASE}
+  IN UINT32 CfgPciMmioSize;                       ///< Pci Mmio region Size.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_SIZE}
+  IN PLATFORM_VRM_CONFIGURATION CfgPlatVrmCfg[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules.
+  IN UINT32 CfgPlatNumIoApics;                    ///< The number of IO APICS for the platform.
+  IN UINT32 CfgMemInitPstate;                     ///< Memory Init Pstate.
+  IN PLATFORM_C1E_MODES CfgPlatformC1eMode;       ///< Select the C1e Mode that will used.
+  IN UINT32 CfgPlatformC1eOpData;                 ///< An IO port or additional C1e setup data, depends on C1e mode.
+  IN UINT32 CfgPlatformC1eOpData1;                ///< An IO port or additional C1e setup data, depends on C1e mode.
+  IN UINT32 CfgPlatformC1eOpData2;                ///< An IO port or additional C1e setup data, depends on C1e mode.
+  IN UINT32 CfgPlatformC1eOpData3;                ///< An IO port or additional C1e setup data, depends on C1e mode.
+  IN PLATFORM_CSTATE_MODES CfgPlatformCStateMode; ///< Select the C-State Mode that will used.
+  IN UINT32 CfgPlatformCStateOpData;              ///< An IO port or additional C-State setup data, depends on C-State mode.
+  IN UINT16 CfgPlatformCStateIoBaseAddress;       ///< Specifies I/O ports that can be used to allow CPU to enter CStates
+  IN PLATFORM_CPB_MODES CfgPlatformCpbMode;       ///< Enable or disable core performance boost
+  IN PLATFORM_LOW_POWER_PSTATE_MODES CfgLowPowerPstateForProcHot; ///< Low power Pstate for PROCHOT mode
+  IN UINT32 CfgCoreLevelingMode;                  ///< Apply any downcoring or core count leveling as specified.
+  IN PERFORMANCE_PROFILE CfgPerformanceProfile;   ///< The platform's control flow mode and platform performance settings.
+  IN CPU_HT_DEEMPHASIS_LEVEL *CfgPlatformDeemphasisList; ///< Deemphasis levels for the platform's HT links.
+
+  IN UINT32 CfgAmdPlatformType;                   ///< Designate the platform as a Server, Desktop, or Mobile.
+  IN UINT32 CfgAmdPstateCapValue;                 ///< Amd pstate ceiling enabling deck
+
+  IN MEMORY_BUS_SPEED CfgMemoryBusFrequencyLimit; ///< Memory Bus Frequency Limit.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT}
+  IN BOOLEAN CfgMemoryModeUnganged;               ///< Memory Mode Unganged.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_MODE_UNGANGED}
+  IN BOOLEAN CfgMemoryQuadRankCapable;            ///< Memory Quad Rank Capable.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUAD_RANK_CAPABLE}
+  IN QUANDRANK_TYPE CfgMemoryQuadrankType;        ///< Memory Quadrank Type.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUADRANK_TYPE}
+  IN BOOLEAN CfgMemoryRDimmCapable;               ///< Memory RDIMM Capable.
+  IN BOOLEAN CfgMemoryLRDimmCapable;              ///< Memory LRDIMM Capable.
+  IN BOOLEAN CfgMemoryUDimmCapable;               ///< Memory UDIMM Capable.
+  IN BOOLEAN CfgMemorySODimmCapable;              ///< Memory SODimm Capable.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_SODIMM_CAPABLE}
+  IN BOOLEAN CfgLimitMemoryToBelow1Tb;            ///< Limit memory address space to below 1TB
+  IN BOOLEAN CfgMemoryEnableBankInterleaving;     ///< Memory Enable Bank Interleaving.
+  IN BOOLEAN CfgMemoryEnableNodeInterleaving;     ///< Memory Enable Node Interleaving.
+  IN BOOLEAN CfgMemoryChannelInterleaving;        ///< Memory Channel Interleaving.
+  IN BOOLEAN CfgMemoryPowerDown;                  ///< Memory Power Down.
+  IN POWER_DOWN_MODE CfgPowerDownMode;            ///< Power Down Mode.
+  IN BOOLEAN CfgOnlineSpare;                      ///< Online Spare.
+  IN BOOLEAN CfgMemoryParityEnable;               ///< Memory Parity Enable.
+  IN BOOLEAN CfgBankSwizzle;                      ///< Bank Swizzle.
+  IN USER_MEMORY_TIMING_MODE CfgTimingModeSelect; ///< Timing Mode Select.
+  IN MEMORY_BUS_SPEED CfgMemoryClockSelect;       ///< Memory Clock Select.
+  IN BOOLEAN CfgDqsTrainingControl;               ///< Dqs Training Control.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_DQS_TRAINING_CONTROL}
+  IN BOOLEAN CfgIgnoreSpdChecksum;                ///< Ignore Spd Checksum.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGNORE_SPD_CHECKSUM}
+  IN BOOLEAN CfgUseBurstMode;                     ///< Use Burst Mode.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_USE_BURST_MODE}
+  IN BOOLEAN CfgMemoryAllClocksOn;                ///< Memory All Clocks On.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_ALL_CLOCKS_ON}
+  IN BOOLEAN CfgEnableEccFeature;                 ///< Enable ECC Feature.
+  IN BOOLEAN CfgEccRedirection;                   ///< ECC Redirection.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_REDIRECTION}
+  IN UINT16  CfgScrubDramRate;                    ///< Scrub Dram Rate.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DRAM_RATE}
+  IN UINT16  CfgScrubL2Rate;                      ///< Scrub L2Rate.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L2_RATE}
+  IN UINT16  CfgScrubL3Rate;                      ///< Scrub L3Rate.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L3_RATE}
+  IN UINT16  CfgScrubIcRate;                      ///< Scrub Ic Rate.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_IC_RATE}
+  IN UINT16  CfgScrubDcRate;                      ///< Scrub Dc Rate.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DC_RATE}
+  IN BOOLEAN CfgEccSyncFlood;                     ///< ECC Sync Flood.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYNC_FLOOD}
+  IN UINT16  CfgEccSymbolSize;                    ///< ECC Symbol Size.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYMBOL_SIZE}
+  IN UINT64  CfgHeapDramAddress;                  ///< Heap contents will be temporarily stored in this address during the transition.
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_HEAP_DRAM_ADDRESS}
+  IN BOOLEAN CfgNodeMem1GBAlign;                  ///< Node Mem 1GB boundary Alignment
+  IN BOOLEAN CfgS3LateRestore;                    ///< S3 Late Restore
+  IN BOOLEAN CfgAcpiPstateIndependent;            ///< PSD method dependent/Independent
+  IN AP_MTRR_SETTINGS *CfgApMtrrSettingsList;     ///< The AP's MTRR settings before final halt
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_AP_MTRR_SETTINGS_LIST}
+  IN UMA_MODE CfgUmaMode;                         ///< Uma Mode
+  IN UINT32 CfgUmaSize;                           ///< Uma Size [31:0]=Addr[47:16]
+  IN BOOLEAN CfgUmaAbove4G;                       ///< Uma Above 4G Support
+  IN UMA_ALIGNMENT CfgUmaAlignment;               ///< Uma alignment
+  IN BOOLEAN CfgProcessorScopeInSb;               ///< ACPI Processor Object in \\_SB scope
+  IN CHAR8   CfgProcessorScopeName0;              ///< OEM specific 1st character of processor scope name.
+  IN CHAR8   CfgProcessorScopeName1;              ///< OEM specific 2nd character of processor scope name.
+  IN UINT8   CfgGnbHdAudio;                       ///< GNB HD Audio
+  IN UINT8   CfgAbmSupport;                       ///< Abm Support
+  IN UINT8   CfgDynamicRefreshRate;               ///< DRR Dynamic Refresh Rate
+  IN UINT16  CfgLcdBackLightControl;              ///< LCD Backlight Control
+  IN UINT8   CfgGnb3dStereoPinIndex;                ///< 3D Stereo Pin ID.
+  IN UINT32  CfgTempPcieMmioBaseAddress;          ///< Temp pcie MMIO base Address
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_TEMP_PCIE_MMIO_BASE_ADDRESS}
+  IN UINT32  CfgGnbIGPUSSID;                      ///< Gnb internal GPU SSID
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_SUBSYSTEM_ID}
+  IN UINT32  CfgGnbHDAudioSSID;                   ///< Gnb HD Audio SSID
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID}
+  IN UINT32  CfgGnbPcieSSID;                      ///< Gnb PCIe SSID
+                                                  ///< Build-time customizable only - @BldCfgItem{BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID}
+  IN UINT16  CfgLvdsSpreadSpectrum;               ///< Lvds Spread Spectrum
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM}
+  IN UINT16  CfgLvdsSpreadSpectrumRate;           ///< Lvds Spread Spectrum Rate
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE}
+  IN FCH_PLATFORM_POLICY  *FchBldCfg;             ///< FCH platform build configuration policy
+
+  IN BOOLEAN    CfgIommuSupport;                  ///< IOMMU support
+  IN UINT8      CfgLvdsPowerOnSeqDigonToDe;       ///< Panel initialization timing
+  IN UINT8      CfgLvdsPowerOnSeqDeToVaryBl;      ///< Panel initialization timing
+  IN UINT8      CfgLvdsPowerOnSeqDeToDigon;       ///< Panel initialization timing
+  IN UINT8      CfgLvdsPowerOnSeqVaryBlToDe;      ///< Panel initialization timing
+  IN UINT8      CfgLvdsPowerOnSeqOnToOffDelay;    ///< Panel initialization timing
+  IN UINT8      CfgLvdsPowerOnSeqVaryBlToBlon;    ///< Panel initialization timing
+  IN UINT8      CfgLvdsPowerOnSeqBlonToVaryBl;    ///< Panel initialization timing
+  IN UINT16     CfgLvdsMaxPixelClockFreq;         ///< The maximum pixel clock frequency supported
+  IN UINT32     CfgLcdBitDepthControlValue;       ///< The LCD bit depth control settings
+  IN UINT8      CfgLvds24bbpPanelMode;            ///< The LVDS 24 BBP mode
+  IN LVDS_MISC_CONTROL CfgLvdsMiscControl;        ///< THe LVDS Misc control
+  IN UINT16     CfgPcieRefClkSpreadSpectrum;      ///< PCIe Reference Clock Spread Spectrum
+                                                  ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM}
+  IN BOOLEAN    CfgExternalVrefCtlFeature;        ///< External Vref control
+  IN FORCE_TRAIN_MODE   CfgForceTrainMode;        ///< Force Train Mode
+  IN BOOLEAN    CfgGnbRemoteDisplaySupport;       ///< Wireless Display Support
+  IN IOMMU_EXCLUSION_RANGE_DESCRIPTOR *CfgIvrsExclusionRangeList;
+  IN BOOLEAN Reserved;                            ///< reserved...
+} BUILD_OPT_CFG;
+
+///  A structure containing platform specific operational characteristics. This
+///  structure is initially populated by the initializer with a copy of the same
+///  structure that was created at build time using the build configuration controls.
+typedef struct _PLATFORM_CONFIGURATION {
+  IN PERFORMANCE_PROFILE PlatformProfile;             ///< Several configuration settings for the processor.
+  IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList; ///< Deemphasis levels for the platform's HT links.
+                                                      ///< @BldCfgItem{BLDCFG_PLATFORM_DEEMPHASIS_LIST}.
+                                                      ///< @n @e Examples: See @ref DeemphasisExamples "Deemphasis List Examples".
+  IN UINT8               CoreLevelingMode;            ///< Indicates how to balance the number of cores per processor.
+                                                      ///< @BldCfgItem{BLDCFG_CORE_LEVELING_MODE}
+  IN PLATFORM_C1E_MODES  C1eMode;                     ///< Specifies the method of C1e enablement - Disabled, HW, or message based.
+                                                      ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_MODE}
+  IN UINT32              C1ePlatformData;             ///< If C1eMode is HW, specifies the P_LVL3 I/O port of the platform.
+                                                      ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA}
+  IN UINT32              C1ePlatformData1;            ///< If C1eMode is SW, specifies the address of chipset's SMI command port.
+                                                      ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA1}
+  IN UINT32              C1ePlatformData2;            ///< If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source.
+                                                      ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA2}
+  IN UINT32              C1ePlatformData3;            ///< If C1eMode is Auto, specifies the P_LVL3 I/O port of the platform for HW C1e
+                                                      ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA3}
+  IN PLATFORM_CSTATE_MODES  CStateMode;               ///< Specifies the method of C-State enablement - Disabled, or C6.
+                                                      ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_MODE}
+  IN UINT32              CStatePlatformData;          ///< This element specifies some pertinent data needed for the operation of the Cstate feature
+                                                      ///< If CStateMode is CStateModeC6, this item is reserved
+                                                      ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_OPDATA}
+  IN UINT16              CStateIoBaseAddress;         ///< This item specifies a free block of 8 consecutive bytes of I/O ports that
+                                                      ///< can be used to allow the CPU to enter Cstates.
+                                                      ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS}
+  IN PLATFORM_CPB_MODES  CpbMode;                     ///< Specifies the method of core performance boost enablement - Disabled, or Auto.
+                                                      ///< @BldCfgItem{BLDCFG_PLATFORM_CPB_MODE}
+  IN BOOLEAN             UserOptionDmi;               ///< When set to TRUE, the DMI data table is generated.
+  IN BOOLEAN             UserOptionPState;            ///< When set to TRUE, the PState data tables are generated.
+  IN BOOLEAN             UserOptionSrat;              ///< When set to TRUE, the SRAT data table is generated.
+  IN BOOLEAN             UserOptionSlit;              ///< When set to TRUE, the SLIT data table is generated.
+  IN BOOLEAN             UserOptionWhea;              ///< When set to TRUE, the WHEA data table is generated.
+  IN PLATFORM_LOW_POWER_PSTATE_MODES  LowPowerPstateForProcHot; ///< Specifies the method of low power Pstate for PROCHOT enablement - Disabled, or Auto.
+  IN UINT32              PowerCeiling;                ///< P-State Ceiling Enabling Deck - Max power milli-watts.
+  IN BOOLEAN             ForcePstateIndependent;      ///< P-State _PSD independence or dependence.
+                                                      ///< @BldCfgItem{BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT}
+  IN BOOLEAN             PStatesInHpcMode;            ///< @BldCfgItem{BLDCFG_PSTATE_HPC_MODE}
+  IN UINT32              NumberOfIoApics;             ///< Number of I/O APICs in the system
+                                                      ///< @BldCfgItem{BLDCFG_PLATFORM_NUM_IO_APICS}
+  IN PLATFORM_VRM_CONFIGURATION VrmProperties[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules.
+  IN BOOLEAN             ProcessorScopeInSb;          ///< ACPI Processor Object in \\_SB scope
+                                                      ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_IN_SB}
+  IN CHAR8               ProcessorScopeName0;         ///< OEM specific 1st character of processor scope name.
+                                                      ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME0}
+  IN CHAR8               ProcessorScopeName1;         ///< OEM specific 2nd character of processor scope name.
+                                                      ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME1}
+  IN UINT8               GnbHdAudio;                  ///< Control GFX HD Audio controller(Used for HDMI and DP display output),
+                                                      ///< essentially it enables function 1 of graphics device.
+                                                      ///< @li 0 = HD Audio disable
+                                                      ///< @li 1 = HD Audio enable
+                                                      ///< @BldCfgItem{BLDCFG_CFG_GNB_HD_AUDIO}
+  IN UINT8               AbmSupport;                  ///< Automatic adjust LVDS/eDP Back light level support.It is
+                                                      ///< characteristic specific to display panel which used by platform design.
+                                                      ///< @li 0 = ABM support disabled
+                                                      ///< @li 1 = ABM support enabled
+                                                      ///< @BldCfgItem{BLDCFG_CFG_ABM_SUPPORT}
+  IN UINT8               DynamicRefreshRate;          ///< Adjust refresh rate on LVDS/eDP.
+                                                      ///< @BldCfgItem{BLDCFG_CFG_DYNAMIC_REFRESH_RATE}
+  IN UINT16              LcdBackLightControl;         ///< The PWM frequency to LCD backlight control.
+                                                      ///< If equal to 0 backlight not controlled by iGPU
+                                                      ///< @BldCfgItem{BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL}
+} PLATFORM_CONFIGURATION;
+
+
+/**********************************************************************
+ * Structures for: AmdInitLate
+ **********************************************************************/
+#define PROC_VERSION_LENGTH 48
+#define MAX_DIMMS_PER_SOCKET 16
+
+/*  Interface Parameter Structures  */
+/// DMI Type4 - Processor ID
+typedef struct {
+  OUT UINT32                    ProcIdLsd;              ///< Lower half of 64b ID
+  OUT UINT32                    ProcIdMsd;              ///< Upper half of 64b ID
+} TYPE4_PROC_ID;
+
+/// DMI Type 4 - Processor information
+typedef struct {
+  OUT UINT8                     T4ProcType;             ///< CPU Type
+  OUT UINT8                     T4ProcFamily;           ///< Family 1
+  OUT TYPE4_PROC_ID             T4ProcId;               ///< Id
+  OUT UINT8                     T4Voltage;              ///< Voltage
+  OUT UINT16                    T4ExternalClock;        ///< External clock
+  OUT UINT16                    T4MaxSpeed;             ///< Max speed
+  OUT UINT16                    T4CurrentSpeed;         ///< Current speed
+  OUT UINT8                     T4Status;               ///< Status
+  OUT UINT8                     T4ProcUpgrade;          ///< Up grade
+  OUT UINT8                     T4CoreCount;            ///< Core count
+  OUT UINT8                     T4CoreEnabled;          ///< Core Enable
+  OUT UINT8                     T4ThreadCount;          ///< Thread count
+  OUT UINT16                    T4ProcCharacteristics;  ///< Characteristics
+  OUT UINT16                    T4ProcFamily2;          ///< Family 2
+  OUT CHAR8                     T4ProcVersion[PROC_VERSION_LENGTH]; ///< Cpu version
+} TYPE4_DMI_INFO;
+
+/// DMI Type 7 - Cache information
+typedef struct _TYPE7_DMI_INFO {
+  OUT UINT16                    T7CacheCfg;             ///< Cache cfg
+  OUT UINT16                    T7MaxCacheSize;         ///< Max size
+  OUT UINT16                    T7InstallSize;          ///< Install size
+  OUT UINT16                    T7SupportedSramType;    ///< Supported Sram Type
+  OUT UINT16                    T7CurrentSramType;      ///< Current type
+  OUT UINT8                     T7CacheSpeed;           ///< Speed
+  OUT UINT8                     T7ErrorCorrectionType;  ///< ECC type
+  OUT UINT8                     T7SystemCacheType;      ///< Cache type
+  OUT UINT8                     T7Associativity;        ///< Associativity
+} TYPE7_DMI_INFO;
+
+/// DMI Type 16 offset 04h - Location
+typedef enum {
+  OtherLocation = 0x01,                                 ///< Assign 01 to Other
+  UnknownLocation,                                      ///< Assign 02 to Unknown
+  SystemboardOrMotherboard,                             ///< Assign 03 to systemboard or motherboard
+  IsaAddonCard,                                         ///< Assign 04 to ISA add-on card
+  EisaAddonCard,                                        ///< Assign 05 to EISA add-on card
+  PciAddonCard,                                         ///< Assign 06 to PCI add-on card
+  McaAddonCard,                                         ///< Assign 07 to MCA add-on card
+  PcmciaAddonCard,                                      ///< Assign 08 to PCMCIA add-on card
+  ProprietaryAddonCard,                                 ///< Assign 09 to proprietary add-on card
+  NuBus,                                                ///< Assign 0A to NuBus
+  Pc98C20AddonCard,                                     ///< Assign 0A0 to PC-98/C20 add-on card
+  Pc98C24AddonCard,                                     ///< Assign 0A1 to PC-98/C24 add-on card
+  Pc98EAddoncard,                                       ///< Assign 0A2 to PC-98/E add-on card
+  Pc98LocalBusAddonCard                                 ///< Assign 0A3 to PC-98/Local bus add-on card
+} DMI_T16_LOCATION;
+
+/// DMI Type 16 offset 05h - Memory Error Correction
+typedef enum {
+  OtherUse = 0x01,                                      ///< Assign 01 to Other
+  UnknownUse,                                           ///< Assign 02 to Unknown
+  SystemMemory,                                         ///< Assign 03 to system memory
+  VideoMemory,                                          ///< Assign 04 to video memory
+  FlashMemory,                                          ///< Assign 05 to flash memory
+  NonvolatileRam,                                       ///< Assign 06 to non-volatile RAM
+  CacheMemory                                           ///< Assign 07 to cache memory
+} DMI_T16_USE;
+
+/// DMI Type 16 offset 07h - Maximum Capacity
+typedef enum {
+  Dmi16OtherErrCorrection = 0x01,                       ///< Assign 01 to Other
+  Dmi16UnknownErrCorrection,                            ///< Assign 02 to Unknown
+  Dmi16NoneErrCorrection,                               ///< Assign 03 to None
+  Dmi16Parity,                                          ///< Assign 04 to parity
+  Dmi16SingleBitEcc,                                    ///< Assign 05 to Single-bit ECC
+  Dmi16MultiBitEcc,                                     ///< Assign 06 to Multi-bit ECC
+  Dmi16Crc                                              ///< Assign 07 to CRC
+} DMI_T16_ERROR_CORRECTION;
+
+/// DMI Type 16 - Physical Memory Array
+typedef struct {
+  OUT DMI_T16_LOCATION          Location;               ///< The physical location of the Memory Array,
+                                                        ///< whether on the system board or an add-in board.
+  OUT DMI_T16_USE               Use;                    ///< Identifies the function for which the array
+                                                        ///< is used.
+  OUT DMI_T16_ERROR_CORRECTION  MemoryErrorCorrection;  ///< The primary hardware error correction or
+                                                        ///< detection method supported by this memory array.
+  OUT UINT32                    MaximumCapacity;        ///< The maximum memory capacity, in kilobytes,
+                                                        ///< for the array.
+  OUT UINT16                    NumberOfMemoryDevices;  ///< The number of slots or sockets available
+                                                        ///< for memory devices in this array.
+  OUT UINT64                    ExtMaxCapacity;         ///< The maximum memory capacity, in bytes,
+                                                        ///< for this array.
+} TYPE16_DMI_INFO;
+
+/// DMI Type 17 offset 0Eh - Form Factor
+typedef enum {
+  OtherFormFactor = 0x01,                               ///< Assign 01 to Other
+  UnknowFormFactor,                                     ///< Assign 02 to Unknown
+  SimmFormFactor,                                       ///< Assign 03 to SIMM
+  SipFormFactor,                                        ///< Assign 04 to SIP
+  ChipFormFactor,                                       ///< Assign 05 to Chip
+  DipFormFactor,                                        ///< Assign 06 to DIP
+  ZipFormFactor,                                        ///< Assign 07 to ZIP
+  ProprietaryCardFormFactor,                            ///< Assign 08 to Proprietary Card
+  DimmFormFactorFormFactor,                             ///< Assign 09 to DIMM
+  TsopFormFactor,                                       ///< Assign 10 to TSOP
+  RowOfChipsFormFactor,                                 ///< Assign 11 to Row of chips
+  RimmFormFactor,                                       ///< Assign 12 to RIMM
+  SodimmFormFactor,                                     ///< Assign 13 to SODIMM
+  SrimmFormFactor,                                      ///< Assign 14 to SRIMM
+  FbDimmFormFactor                                      ///< Assign 15 to FB-DIMM
+} DMI_T17_FORM_FACTOR;
+
+/// DMI Type 17 offset 12h - Memory Type
+typedef enum {
+  OtherMemType = 0x01,                                  ///< Assign 01 to Other
+  UnknownMemType,                                       ///< Assign 02 to Unknown
+  DramMemType,                                          ///< Assign 03 to DRAM
+  EdramMemType,                                         ///< Assign 04 to EDRAM
+  VramMemType,                                          ///< Assign 05 to VRAM
+  SramMemType,                                          ///< Assign 06 to SRAM
+  RamMemType,                                           ///< Assign 07 to RAM
+  RomMemType,                                           ///< Assign 08 to ROM
+  FlashMemType,                                         ///< Assign 09 to Flash
+  EepromMemType,                                        ///< Assign 10 to EEPROM
+  FepromMemType,                                        ///< Assign 11 to FEPROM
+  EpromMemType,                                         ///< Assign 12 to EPROM
+  CdramMemType,                                         ///< Assign 13 to CDRAM
+  ThreeDramMemType,                                     ///< Assign 14 to 3DRAM
+  SdramMemType,                                         ///< Assign 15 to SDRAM
+  SgramMemType,                                         ///< Assign 16 to SGRAM
+  RdramMemType,                                         ///< Assign 17 to RDRAM
+  DdrMemType,                                           ///< Assign 18 to DDR
+  Ddr2MemType,                                          ///< Assign 19 to DDR2
+  Ddr2FbdimmMemType,                                    ///< Assign 20 to DDR2 FB-DIMM
+  Ddr3MemType = 0x18,                                   ///< Assign 24 to DDR3
+  Fbd2MemType                                           ///< Assign 25 to FBD2
+} DMI_T17_MEMORY_TYPE;
+
+/// DMI Type 17 offset 13h - Type Detail
+typedef struct {
+  OUT UINT16                    Reserved1:1;            ///< Reserved
+  OUT UINT16                    Other:1;                ///< Other
+  OUT UINT16                    Unknown:1;              ///< Unknown
+  OUT UINT16                    FastPaged:1;            ///< Fast-Paged
+  OUT UINT16                    StaticColumn:1;         ///< Static column
+  OUT UINT16                    PseudoStatic:1;         ///< Pseudo-static
+  OUT UINT16                    Rambus:1;               ///< RAMBUS
+  OUT UINT16                    Synchronous:1;          ///< Synchronous
+  OUT UINT16                    Cmos:1;                 ///< CMOS
+  OUT UINT16                    Edo:1;                  ///< EDO
+  OUT UINT16                    WindowDram:1;           ///< Window DRAM
+  OUT UINT16                    CacheDram:1;            ///< Cache Dram
+  OUT UINT16                    NonVolatile:1;          ///< Non-volatile
+  OUT UINT16                    Reserved2:3;            ///< Reserved
+} DMI_T17_TYPE_DETAIL;
+
+/// DMI Type 17 - Memory Device
+typedef struct {
+  OUT UINT16                    TotalWidth;             ///< Total Width, in bits, of this memory device, including any check or error-correction bits.
+  OUT UINT16                    DataWidth;              ///< Data Width, in bits, of this memory device.
+  OUT UINT16                    MemorySize;             ///< The size of the memory device.
+  OUT DMI_T17_FORM_FACTOR       FormFactor;             ///< The implementation form factor for this memory device.
+  OUT UINT8                     DeviceSet;              ///< Identifies when the Memory Device is one of a set of
+                                                        ///< Memory Devices that must be populated with all devices of
+                                                        ///< the same type and size, and the set to which this device belongs.
+  OUT CHAR8                     DeviceLocator[8];       ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located.
+  OUT CHAR8                     BankLocator[10];        ///< The string number of the string that identifies the physically labeled bank where the memory device is located.
+  OUT DMI_T17_MEMORY_TYPE       MemoryType;             ///< The type of memory used in this device.
+  OUT DMI_T17_TYPE_DETAIL       TypeDetail;             ///< Additional detail on the memory device type
+  OUT UINT16                    Speed;                  ///< Identifies the speed of the device, in megahertz (MHz).
+  OUT UINT64                    ManufacturerIdCode;     ///< Manufacturer ID code.
+  OUT CHAR8                     SerialNumber[9];        ///< Serial Number.
+  OUT CHAR8                     PartNumber[19];         ///< Part Number.
+  OUT UINT8                     Attributes;             ///< Bits 7-4: Reserved, Bits 3-0: rank.
+  OUT UINT32                    ExtSize;                ///< Extended Size.
+  OUT UINT16                    ConfigSpeed;            ///< Configured memory clock speed
+} TYPE17_DMI_INFO;
+
+/// Memory DMI Type 17 and 20 - for memory use
+typedef struct {
+  OUT UINT16                    TotalWidth;             ///< Total Width, in bits, of this memory device, including any check or error-correction bits.
+  OUT UINT16                    DataWidth;              ///< Data Width, in bits, of this memory device.
+  OUT UINT16                    MemorySize;             ///< The size of the memory device.
+  OUT DMI_T17_FORM_FACTOR       FormFactor;             ///< The implementation form factor for this memory device.
+  OUT UINT8                     DeviceLocator;          ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located.
+  OUT UINT8                     BankLocator;            ///< The string number of the string that identifies the physically labeled bank where the memory device is located.
+  OUT UINT16                    Speed;                  ///< Identifies the speed of the device, in megahertz (MHz).
+  OUT UINT64                    ManufacturerIdCode;     ///< Manufacturer ID code.
+  OUT UINT8                     SerialNumber[4];        ///< Serial Number.
+  OUT UINT8                     PartNumber[18];         ///< Part Number.
+  OUT UINT8                     Attributes;             ///< Bits 7-4: Reserved, Bits 3-0: rank.
+  OUT UINT32                    ExtSize;                ///< Extended Size.
+  OUT UINT8                     Socket:3;               ///< Socket ID
+  OUT UINT8                     Channel:2;              ///< Channel ID
+  OUT UINT8                     Dimm:2;                 ///< DIMM ID
+  OUT UINT8                     DimmPresent:1;          ///< Dimm Present
+  OUT UINT32                    StartingAddr;           ///< The physical address, in kilobytes, of a range
+                                                        ///< of memory mapped to the referenced Memory Device.
+  OUT UINT32                    EndingAddr;             ///< The handle, or instance number, associated with
+                                                        ///< the Memory Device structure to which this address
+                                                        ///< range is mapped.
+  OUT UINT16                    ConfigSpeed;            ///< Configured memory clock speed
+  OUT UINT64                    ExtStartingAddr;        ///< The physical address, in bytes, of a range of
+                                                        ///< memory mapped to the referenced Memory Device.
+  OUT UINT64                    ExtEndingAddr;          ///< The physical ending address, in bytes, of the last of
+                                                        ///< a range of addresses mapped to the referenced Memory Device.
+} MEM_DMI_INFO;
+
+/// DMI Type 19 - Memory Array Mapped Address
+typedef struct {
+  OUT UINT32                    StartingAddr;           ///< The physical address, in kilobytes,
+                                                        ///< of a range of memory mapped to the
+                                                        ///< specified physical memory array.
+  OUT UINT32                    EndingAddr;             ///< The physical ending address of the
+                                                        ///< last kilobyte of a range of addresses
+                                                        ///< mapped to the specified physical memory array.
+  OUT UINT16                    MemoryArrayHandle;      ///< The handle, or instance number, associated
+                                                        ///< with the physical memory array to which this
+                                                        ///< address range is mapped.
+  OUT UINT8                     PartitionWidth;         ///< Identifies the number of memory devices that
+                                                        ///< form a single row of memory for the address
+                                                        ///< partition defined by this structure.
+  OUT UINT64                    ExtStartingAddr;        ///< The physical address, in bytes, of a range of
+                                                        ///< memory mapped to the specified Physical Memory Array.
+  OUT UINT64                    ExtEndingAddr;          ///< The physical address, in bytes, of a range of
+                                                        ///< memory mapped to the specified Physical Memory Array.
+} TYPE19_DMI_INFO;
+
+///DMI Type 20 - Memory Device Mapped Address
+typedef struct {
+  OUT UINT32                    StartingAddr;           ///< The physical address, in kilobytes, of a range
+                                                        ///< of memory mapped to the referenced Memory Device.
+  OUT UINT32                    EndingAddr;             ///< The handle, or instance number, associated with
+                                                        ///< the Memory Device structure to which this address
+                                                        ///< range is mapped.
+  OUT UINT16                    MemoryDeviceHandle;     ///< The handle, or instance number, associated with
+                                                        ///< the Memory Device structure to which this address
+                                                        ///< range is mapped.
+  OUT UINT16                    MemoryArrayMappedAddressHandle; ///< The handle, or instance number, associated
+                                                        ///< with the Memory Array Mapped Address structure to
+                                                        ///< which this device address range is mapped.
+  OUT UINT8                     PartitionRowPosition;   ///< Identifies the position of the referenced Memory
+                                                        ///< Device in a row of the address partition.
+  OUT UINT8                     InterleavePosition;     ///< The position of the referenced Memory Device in
+                                                        ///< an interleave.
+  OUT UINT8                     InterleavedDataDepth;   ///< The maximum number of consecutive rows from the
+                                                        ///< referenced Memory Device that are accessed in a
+                                                        ///< single interleaved transfer.
+  OUT UINT64                    ExtStartingAddr;        ///< The physical address, in bytes, of a range of
+                                                        ///< memory mapped to the referenced Memory Device.
+  OUT UINT64                    ExtEndingAddr;          ///< The physical ending address, in bytes, of the last of
+                                                        ///< a range of addresses mapped to the referenced Memory Device.
+} TYPE20_DMI_INFO;
+
+/// Collection of pointers to the DMI records
+typedef struct {
+  OUT TYPE4_DMI_INFO            T4[MAX_SOCKETS_SUPPORTED];    ///< Type 4 struc
+  OUT TYPE7_DMI_INFO            T7L1[MAX_SOCKETS_SUPPORTED];  ///< Type 7 struc 1
+  OUT TYPE7_DMI_INFO            T7L2[MAX_SOCKETS_SUPPORTED];  ///< Type 7 struc 2
+  OUT TYPE7_DMI_INFO            T7L3[MAX_SOCKETS_SUPPORTED];  ///< Type 7 struc 3
+  OUT TYPE16_DMI_INFO           T16;                          ///< Type 16 struc
+  OUT TYPE17_DMI_INFO           T17[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 17 struc
+  OUT TYPE19_DMI_INFO           T19;                          ///< Type 19 struc
+  OUT TYPE20_DMI_INFO           T20[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 20 struc
+} DMI_INFO;
+
+/**********************************************************************
+ * Interface call:  AllocateExecutionCache
+ **********************************************************************/
+#define MAX_CACHE_REGIONS    3
+
+/// AllocateExecutionCache sub param structure for cached memory region
+typedef struct {
+  IN OUT   UINT32               ExeCacheStartAddr;      ///< Start address
+  IN OUT   UINT32               ExeCacheSize;           ///< Size
+} EXECUTION_CACHE_REGION;
+
+/**********************************************************************
+ * Interface call:  AmdGetAvailableExeCacheSize
+ **********************************************************************/
+/// Get available Cache remain
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS    StdHeader;              ///< Standard configuration header
+     OUT   UINT32               AvailableExeCacheSize;  ///< Remain size
+} AMD_GET_EXE_SIZE_PARAMS;
+
+AGESA_STATUS
+AmdGetAvailableExeCacheSize (
+  IN OUT   AMD_GET_EXE_SIZE_PARAMS *AmdGetExeSizeParams
+  );
+
+/// Selection type for core leveling
+typedef enum {
+  CORE_LEVEL_LOWEST,            ///< Level to lowest common denominator
+  CORE_LEVEL_TWO,               ///< Level to 2 cores
+  CORE_LEVEL_POWER_OF_TWO,      ///< Level to 1,2,4 or 8
+  CORE_LEVEL_NONE,              ///< Do no leveling
+  CORE_LEVEL_COMPUTE_UNIT,      ///< Level cores to one core per compute unit
+  CORE_LEVEL_ONE,               ///< Level to 1 core
+  CORE_LEVEL_THREE,             ///< Level to 3 cores
+  CORE_LEVEL_FOUR,              ///< Level to 4 cores
+  CORE_LEVEL_FIVE,              ///< Level to 5 cores
+  CORE_LEVEL_SIX,               ///< Level to 6 cores
+  CORE_LEVEL_SEVEN,             ///< Level to 7 cores
+  CORE_LEVEL_EIGHT,             ///< Level to 8 cores
+  CORE_LEVEL_NINE,              ///< Level to 9 cores
+  CORE_LEVEL_TEN,               ///< Level to 10 cores
+  CORE_LEVEL_ELEVEN,            ///< Level to 11 cores
+  CORE_LEVEL_TWELVE,            ///< Level to 12 cores
+  CORE_LEVEL_THIRTEEN,          ///< Level to 13 cores
+  CORE_LEVEL_FOURTEEN,          ///< Level to 14 cores
+  CORE_LEVEL_FIFTEEN,           ///< Level to 15 cores
+  CoreLevelModeMax              ///< Used for bounds checking
+} CORE_LEVELING_TYPE;
+
+
+
+
+
+/************************************************************************
+ *
+ *  AGESA Basic Level interface structure definition and function prototypes
+ *
+ ***********************************************************************/
+
+/**********************************************************************
+ * Interface call:  AmdCreateStruct
+ **********************************************************************/
+AGESA_STATUS
+AmdCreateStruct (
+  IN OUT   AMD_INTERFACE_PARAMS *InterfaceParams
+  );
+
+/**********************************************************************
+ * Interface call:  AmdReleaseStruct
+ **********************************************************************/
+AGESA_STATUS
+AmdReleaseStruct (
+  IN OUT   AMD_INTERFACE_PARAMS *InterfaceParams
+  );
+
+/**********************************************************************
+ * Interface call:  AmdInitReset
+ **********************************************************************/
+/// AmdInitReset param structure
+typedef struct {
+  IN       AMD_CONFIG_PARAMS         StdHeader;        ///< Standard configuration header
+  IN       EXECUTION_CACHE_REGION    CacheRegion[3];   ///< The cached memory region
+  IN       AMD_HT_RESET_INTERFACE    HtConfig;         ///< The interface for Ht Recovery
+  IN       FCH_RESET_INTERFACE       FchInterface;     ///< Interface for FCH configuration
+} AMD_RESET_PARAMS;
+
+AGESA_STATUS
+AmdInitReset (
+  IN OUT   AMD_RESET_PARAMS     *ResetParams
+  );
+
+
+/**********************************************************************
+ * Interface call:  AmdInitEarly
+ **********************************************************************/
+/// InitEarly param structure
+///
+/// Provide defaults or customizations to each service performed in AmdInitEarly.
+///
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS      StdHeader;        ///< Standard configuration header
+  IN       EXECUTION_CACHE_REGION CacheRegion[3];   ///< Execution Map Interface
+  IN       PLATFORM_CONFIGURATION PlatformConfig;   ///< platform operational characteristics.
+  IN       AMD_HT_INTERFACE       HtConfig;         ///< HyperTransport Interface
+  IN       GNB_CONFIGURATION      GnbConfig;        ///< GNB configuration
+} AMD_EARLY_PARAMS;
+
+AGESA_STATUS
+AmdInitEarly (
+  IN OUT   AMD_EARLY_PARAMS     *EarlyParams
+  );
+
+
+/**********************************************************************
+ * Interface call:  AmdInitPost
+ **********************************************************************/
+/// AmdInitPost param structure
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS      StdHeader;        ///< Standard configuration header
+  IN       PLATFORM_CONFIGURATION PlatformConfig;   ///< platform operational characteristics.
+  IN       MEM_PARAMETER_STRUCT   MemConfig;        ///< Memory post param
+} AMD_POST_PARAMS;
+
+AGESA_STATUS
+AmdInitPost (
+  IN OUT   AMD_POST_PARAMS      *PostParams         ///< Amd Cpu init param
+  );
+
+
+/**********************************************************************
+ * Interface call:  AmdInitEnv
+ **********************************************************************/
+/// AmdInitEnv param structure
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS      StdHeader;            ///< Standard configuration header
+  IN       PLATFORM_CONFIGURATION PlatformConfig;       ///< platform operational characteristics.
+  IN       GNB_ENV_CONFIGURATION  GnbEnvConfiguration;  ///< platform operational characteristics.
+  IN       FCH_INTERFACE          FchInterface;         ///< FCH configuration
+} AMD_ENV_PARAMS;
+
+AGESA_STATUS
+AmdInitEnv (
+  IN OUT   AMD_ENV_PARAMS       *EnvParams
+  );
+
+
+/**********************************************************************
+ * Interface call:  AmdInitMid
+ **********************************************************************/
+/// AmdInitMid param structure
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS      StdHeader;        ///< Standard configuration header
+  IN       PLATFORM_CONFIGURATION PlatformConfig;   ///< platform operational characteristics.
+  IN       FCH_INTERFACE          FchInterface;     ///< FCH configuration
+} AMD_MID_PARAMS;
+
+AGESA_STATUS
+AmdInitMid (
+  IN OUT   AMD_MID_PARAMS       *MidParams
+  );
+
+
+/**********************************************************************
+ * Interface call:  AmdInitLate
+ **********************************************************************/
+/// AmdInitLate param structure
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS      StdHeader;              ///< Standard configuration header
+  IN       PLATFORM_CONFIGURATION PlatformConfig;         ///< platform operational characteristics.
+  IN       IOMMU_EXCLUSION_RANGE_DESCRIPTOR  *IvrsExclusionRangeList;   ///< Pointer to array of exclusion ranges
+     OUT   DMI_INFO               *DmiTable;              ///< DMI Interface
+     OUT   VOID                   *AcpiPState;            ///< Acpi Pstate SSDT Table
+     OUT   VOID                   *AcpiSrat;              ///< SRAT Table
+     OUT   VOID                   *AcpiSlit;              ///< SLIT Table
+     OUT   VOID                   *AcpiWheaMce;           ///< WHEA MCE Table
+     OUT   VOID                   *AcpiWheaCmc;           ///< WHEA CMC Table
+     OUT   VOID                   *AcpiAlib;              ///< ACPI SSDT table with ALIB implementation
+     OUT   VOID                   *AcpiIvrs;              ///< IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table
+} AMD_LATE_PARAMS;
+
+AGESA_STATUS
+AmdInitLate (
+  IN OUT   AMD_LATE_PARAMS      *LateParams
+  );
+
+/**********************************************************************
+ * Interface call:  AmdInitRecovery
+ **********************************************************************/
+/// CPU Recovery Parameters
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS StdHeader;             ///< Standard configuration header
+  IN       PLATFORM_CONFIGURATION PlatformConfig;   ///< platform operational characteristics.
+} AMD_CPU_RECOVERY_PARAMS;
+
+/// AmdInitRecovery param structure
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS        StdHeader;            ///< Standard configuration header
+  IN       MEM_PARAMETER_STRUCT     MemConfig;            ///< Memory post param
+  IN       EXECUTION_CACHE_REGION   CacheRegion[3];       ///< The cached memory region. And the max cache region is 3
+  IN       AMD_CPU_RECOVERY_PARAMS  CpuRecoveryParams;    ///< Params for CPU related recovery init.
+} AMD_RECOVERY_PARAMS;
+
+AGESA_STATUS
+AmdInitRecovery (
+  IN OUT   AMD_RECOVERY_PARAMS    *RecoveryParams
+  );
+
+/**********************************************************************
+ * Interface call:  AmdInitResume
+ **********************************************************************/
+/// AmdInitResume param structure
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS      StdHeader;      ///< Standard configuration header
+  IN       PLATFORM_CONFIGURATION PlatformConfig; ///< Platform operational characteristics
+  IN       AMD_S3_PARAMS          S3DataBlock;    ///< Save state data
+} AMD_RESUME_PARAMS;
+
+AGESA_STATUS
+AmdInitResume (
+  IN       AMD_RESUME_PARAMS    *ResumeParams
+  );
+
+
+/**********************************************************************
+ * Interface call:  AmdS3LateRestore
+ **********************************************************************/
+/// AmdS3LateRestore param structure
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS    StdHeader;          ///< Standard configuration header
+  IN       PLATFORM_CONFIGURATION PlatformConfig;   ///< platform operational characteristics.
+  IN       AMD_S3_PARAMS          S3DataBlock;      ///< Save state data
+} AMD_S3LATE_PARAMS;
+
+AGESA_STATUS
+AmdS3LateRestore (
+  IN OUT   AMD_S3LATE_PARAMS    *S3LateParams
+  );
+
+
+/**********************************************************************
+ * Interface call:  AmdS3Save
+ **********************************************************************/
+/// AmdS3Save param structure
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS    StdHeader;          ///< Standard configuration header
+  IN       PLATFORM_CONFIGURATION PlatformConfig;   ///< platform operational characteristics.
+     OUT   AMD_S3_PARAMS          S3DataBlock;      ///< Standard header
+  IN       FCH_INTERFACE          FchInterface;     ///< FCH configuration
+} AMD_S3SAVE_PARAMS;
+
+AGESA_STATUS
+AmdS3Save (
+  IN OUT   AMD_S3SAVE_PARAMS    *AmdS3SaveParams
+  );
+
+
+/**********************************************************************
+ * Interface call:  AmdLateRunApTask
+ **********************************************************************/
+/**
+ * Entry point for AP tasking.
+ */
+AGESA_STATUS
+AmdLateRunApTask (
+  IN       AP_EXE_PARAMS  *AmdApExeParams
+);
+
+//
+// General Services API
+//
+
+/**********************************************************************
+ * Interface service call:  AmdGetApicId
+ **********************************************************************/
+/// Request the APIC ID of a particular core.
+
+typedef struct {
+  IN       AMD_CONFIG_PARAMS StdHeader;        ///< Standard configuration header
+  IN       UINT8             Socket;           ///< The Core's Socket.
+  IN       UINT8             Core;             ///< The Core id.
+     OUT   BOOLEAN           IsPresent;        ///< The Core is present, and  ApicAddress is valid.
+     OUT   UINT8             ApicAddress;      ///< The Core's APIC ID.
+} AMD_APIC_PARAMS;
+
+/**
+ * Get a specified Core's APIC ID.
+ */
+AGESA_STATUS
+AmdGetApicId (
+  IN OUT AMD_APIC_PARAMS *AmdParamApic
+);
+
+/**********************************************************************
+ * Interface service call:  AmdGetPciAddress
+ **********************************************************************/
+/// Request the PCI Address of a Processor Module (that is, its Northbridge)
+
+typedef struct {
+  IN       AMD_CONFIG_PARAMS StdHeader;        ///< Standard configuration header
+  IN       UINT8             Socket;           ///< The Processor's socket
+  IN       UINT8             Module;           ///< The Module in that Processor
+     OUT   BOOLEAN           IsPresent;        ///< The Core is present, and  PciAddress is valid.
+     OUT   PCI_ADDR          PciAddress;       ///< The Processor's PCI Config Space address (Function 0, Register 0)
+} AMD_GET_PCI_PARAMS;
+
+/**
+ * Get Processor Module's PCI Config Space address.
+ */
+AGESA_STATUS
+AmdGetPciAddress (
+  IN OUT   AMD_GET_PCI_PARAMS *AmdParamGetPci
+);
+
+/**********************************************************************
+ * Interface service call:  AmdIdentifyCore
+ **********************************************************************/
+/// Request the identity (Socket, Module, Core) of the current Processor Core
+
+typedef struct {
+  IN       AMD_CONFIG_PARAMS StdHeader;         ///< Standard configuration header
+     OUT   UINT8             Socket;            ///< The current Core's Socket
+     OUT   UINT8             Module;            ///< The current Core's Processor Module
+     OUT   UINT8             Core;              ///< The current Core's core id.
+} AMD_IDENTIFY_PARAMS;
+
+/**
+ * "Who am I" for the current running core.
+ */
+AGESA_STATUS
+AmdIdentifyCore (
+  IN OUT  AMD_IDENTIFY_PARAMS *AmdParamIdentify
+);
+
+/**********************************************************************
+ * Interface service call:  AmdReadEventLog
+ **********************************************************************/
+/// An Event Log Entry.
+typedef struct {
+  IN       AMD_CONFIG_PARAMS StdHeader;         ///< Standard configuration header
+     OUT   UINT32            EventClass;        ///< The severity of this event, matches AGESA_STATUS.
+     OUT   UINT32            EventInfo;         ///< The unique event identifier, zero means "no event".
+     OUT   UINT32            DataParam1;        ///< Data specific to the Event.
+     OUT   UINT32            DataParam2;        ///< Data specific to the Event.
+     OUT   UINT32            DataParam3;        ///< Data specific to the Event.
+     OUT   UINT32            DataParam4;        ///< Data specific to the Event.
+} EVENT_PARAMS;
+
+/**
+ * Read an Event from the Event Log.
+ */
+AGESA_STATUS
+AmdReadEventLog (
+  IN       EVENT_PARAMS *Event
+);
+
+/**********************************************************************
+ * Interface service call:  AmdIdentifyDimm
+ **********************************************************************/
+/// Request the identity of dimm from system address
+
+typedef struct {
+  IN OUT   AMD_CONFIG_PARAMS StdHeader;            ///< Standard configuration header
+  IN       UINT64            MemoryAddress;        ///< System Address that needs to be translated to dimm identification.
+  OUT      UINT8             SocketId;             ///< The socket on which the targeted address locates.
+  OUT      UINT8             MemChannelId;         ///< The channel on which the targeted address locates.
+  OUT      UINT8             DimmId;               ///< The dimm on which the targeted address locates.
+} AMD_IDENTIFY_DIMM;
+
+/**
+ * Get the dimm identification for the address.
+ */
+AGESA_STATUS
+AmdIdentifyDimm (
+  IN OUT   AMD_IDENTIFY_DIMM *AmdDimmIdentify
+);
+
+AGESA_STATUS
+AmdIdsRunApTaskLate (
+  IN       AP_EXE_PARAMS  *AmdApExeParams
+  );
+
+
+#define AGESA_IDS_DFT_VAL   0xFFFF                  ///<  Default value of every uninitlized NV item, the action for it will be ignored
+#define AGESA_IDS_NV_END    0xFFFF                  ///< Flag specify end of option structure
+/// WARNING: Don't change the comment below, it used as signature for script
+/// AGESA IDS NV ID Definitions
+typedef enum {
+  AGESA_IDS_EXT_ID_START                   = 0x0000,///< 0x0000                                                             specify the start of external NV id
+
+  AGESA_IDS_NV_UCODE,                               ///< 0x0001                                                            Enable or disable microcode patching
+
+  AGESA_IDS_NV_TARGET_PSTATE,                       ///< 0x0002                                                        Set the P-state required to be activated
+  AGESA_IDS_NV_POSTPSTATE,                          ///< 0x0003                                           Set the P-state required to be activated through POST
+
+  AGESA_IDS_NV_BANK_INTERLEAVE,                     ///< 0x0004                                                               Enable or disable Bank Interleave
+  AGESA_IDS_NV_CHANNEL_INTERLEAVE,                  ///< 0x0005                                                            Enable or disable Channel Interleave
+  AGESA_IDS_NV_NODE_INTERLEAVE,                     ///< 0x0006                                                               Enable or disable Node Interleave
+  AGESA_IDS_NV_MEMHOLE,                             ///< 0x0007                                                                  Enables or disable memory hole
+
+  AGESA_IDS_NV_SCRUB_REDIRECTION,                   ///< 0x0008                                           Enable or disable a write to dram with corrected data
+  AGESA_IDS_NV_DRAM_SCRUB,                          ///< 0x0009                                                   Set the rate of background scrubbing for DRAM
+  AGESA_IDS_NV_DCACHE_SCRUB,                        ///< 0x000A                                            Set the rate of background scrubbing for the DCache.
+  AGESA_IDS_NV_L2_SCRUB,                            ///< 0x000B                                           Set the rate of background scrubbing for the L2 cache
+  AGESA_IDS_NV_L3_SCRUB,                            ///< 0x000C                                           Set the rate of background scrubbing for the L3 cache
+  AGESA_IDS_NV_ICACHE_SCRUB,                        ///< 0x000D                                             Set the rate of background scrubbing for the Icache
+  AGESA_IDS_NV_SYNC_ON_ECC_ERROR,                   ///< 0x000E                                    Enable or disable the sync flood on un-correctable ECC error
+  AGESA_IDS_NV_ECC_SYMBOL_SIZE,                     ///< 0x000F                                                                             Set ECC symbol size
+
+  AGESA_IDS_NV_ALL_MEMCLKS,                         ///< 0x0010                                                      Enable or disable all memory clocks enable
+  AGESA_IDS_NV_DCT_GANGING_MODE,                    ///< 0x0011                                                                             Set the Ganged mode
+  AGESA_IDS_NV_DRAM_BURST_LENGTH32,                 ///< 0x0012                                                                    Set the DRAM Burst Length 32
+  AGESA_IDS_NV_MEMORY_POWER_DOWN,                   ///< 0x0013                                                        Enable or disable Memory power down mode
+  AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE,              ///< 0x0014                                                                  Set the Memory power down mode
+  AGESA_IDS_NV_DLL_SHUT_DOWN,                       ///< 0x0015                                                                   Enable or disable DLLShutdown
+  AGESA_IDS_NV_ONLINE_SPARE,                        ///< 0x0016      Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap
+
+  AGESA_IDS_NV_HT_ASSIST,                           ///< 0x0017                                                                     Enable or Disable HT Assist
+  AGESA_IDS_NV_ATMMODE,                             ///< 0x0018                                                                      Enable or Disable ATM mode
+
+  AGESA_IDS_NV_HDTOUT,                              ///< 0x0019                                                                Enable or disable HDTOUT feature
+
+  AGESA_IDS_NV_HTLINKSOCKET,                        ///< 0x001A                                                                                  HT Link Socket
+  AGESA_IDS_NV_HTLINKPORT,                          ///< 0x001B                                                                                    HT Link Port
+  AGESA_IDS_NV_HTLINKFREQ,                          ///< 0x001C                                                                               HT Link Frequency
+  AGESA_IDS_NV_HTLINKWIDTHIN,                       ///< 0x001D                                                                                HT Link In Width
+  AGESA_IDS_NV_HTLINKWIDTHOUT,                      ///< 0x001E                                                                               HT Link Out Width
+
+  AGESA_IDS_NV_GNBHDAUDIOEN,                        ///< 0x001F                                                                  Enable or disable GNB HD Audio
+
+  AGESA_IDS_NV_CPB_EN,                              ///< 0x0020                                                                          Core Performance Boost
+
+  AGESA_IDS_NV_HTC_EN,                              ///< 0x0021                                                                                      HTC Enable
+  AGESA_IDS_NV_HTC_OVERRIDE,                        ///< 0x0022                                                                                    HTC Override
+  AGESA_IDS_NV_HTC_PSTATE_LIMIT,                    ///< 0x0023                                                                        HTC P-state limit select
+  AGESA_IDS_NV_HTC_TEMP_HYS,                        ///< 0x0024                                                                      HTC Temperature Hysteresis
+  AGESA_IDS_NV_HTC_ACT_TEMP,                        ///< 0x0025                                                                             HTC Activation Temp
+
+  AGESA_IDS_NV_POWER_POLICY,                        ///< 0x0026                                                                    Select Platform Power Policy
+  AGESA_IDS_EXT_ID_END,                             ///< 0x0027                                                               specify the end of external NV ID
+} IDS_EX_NV_ID;
+
+
+#define IDS_NUM_EXT_NV_ITEM (AGESA_IDS_EXT_ID_END - AGESA_IDS_EXT_ID_START + 1)
+
+#endif // _AGESA_H_
diff --git a/src/vendorcode/amd/agesa/f15/AMD.h b/src/vendorcode/amd/agesa/f15/AMD.h
new file mode 100644
index 0000000000..d1092c6986
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/AMD.h
@@ -0,0 +1,480 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Agesa structures and definitions
+ *
+ * Contains AMD AGESA core interface
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Include
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+
+#ifndef _AMD_H_
+#define _AMD_H_
+
+#define AGESA_REVISION  "Arch2008"
+#define AGESA_ID        "AGESA"
+
+#define Int16FromChar(a,b) ((a) << 0 | (b) << 8)
+#define Int32FromChar(a,b,c,d) ((a) << 0 | (b) << 8 | (c) << 16 | (d) << 24)
+//
+//
+// AGESA Types and Definitions
+//
+//
+#define LAST_ENTRY          0xFFFFFFFF
+#define IMAGE_SIGNATURE     Int32FromChar ('$', 'A', 'M', 'D')
+#define IOCF8 0xCF8
+#define IOCFC 0xCFC
+
+/// The return status for all AGESA public services.
+///
+/// Services return the most severe status of any logged event.  Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK
+/// will have log entries with more detail.
+///
+typedef enum {
+  AGESA_SUCCESS = 0,             ///< The service completed normally. Info may be logged.
+  AGESA_UNSUPPORTED,             ///< The dispatcher or create struct had an unimplemented function requested.
+                                 ///<  Not logged.
+  AGESA_BOUNDS_CHK,              ///< A dynamic parameter was out of range and the service was not provided.
+                                 ///< Example, memory address not installed, heap buffer handle not found.
+                                 ///< Not Logged.
+  // AGESA_STATUS of greater severity (the ones below this line), always have a log entry available.
+  AGESA_ALERT,                   ///< An observed condition, but no loss of function.
+                                 ///<  See log.  Example, HT CRC.
+  AGESA_WARNING,                 ///< Possible or minor loss of function.  See Log.
+  AGESA_ERROR,                   ///< Significant loss of function, boot may be possible.  See Log.
+  AGESA_CRITICAL,                ///< Continue boot only to notify user.  See Log.
+  AGESA_FATAL,                   ///< Halt booting.  See Log, however Fatal errors pertaining to heap problems
+                                 ///< may not be able to reliably produce log events.
+  AgesaStatusMax                 ///< Not a status, for limit checking.
+} AGESA_STATUS;
+
+/// For checking whether a status is at or above the mandatory log level.
+#define AGESA_STATUS_LOG_LEVEL AGESA_ALERT
+
+/**
+ * Callout method to the host environment.
+ *
+ * Callout using a dispatch with appropriate thunk layer, which is determined by the host environment.
+ *
+ * @param[in]        Function      The specific callout function being invoked.
+ * @param[in]        FcnData       Function specific data item.
+ * @param[in,out]    ConfigPtr     Reference to Callout params.
+ */
+typedef AGESA_STATUS (*CALLOUT_ENTRY) (
+  IN       UINT32  Function,
+  IN       UINTN   FcnData,
+  IN OUT   VOID    *ConfigPtr
+  );
+
+typedef AGESA_STATUS (*IMAGE_ENTRY) (VOID *ConfigPtr);
+typedef AGESA_STATUS (*MODULE_ENTRY) (VOID *ConfigPtr);
+
+///This allocation type is used by the AmdCreateStruct entry point
+typedef enum {
+  PreMemHeap = 0,                                           ///< Create heap in cache.
+  PostMemDram,                                              ///< Create heap in memory.
+  ByHost                                                    ///< Create heap by Host.
+} ALLOCATION_METHOD;
+
+/// These width descriptors are used by the library function, and others, to specify the data size
+typedef enum ACCESS_WIDTH {
+  AccessWidth8 = 1,                                         ///< Access width is 8 bits.
+  AccessWidth16,                                            ///< Access width is 16 bits.
+  AccessWidth32,                                            ///< Access width is 32 bits.
+  AccessWidth64,                                            ///< Access width is 64 bits.
+
+  AccessS3SaveWidth8 = 0x81,                                ///< Save 8 bits data.
+  AccessS3SaveWidth16,                                      ///< Save 16 bits data.
+  AccessS3SaveWidth32,                                      ///< Save 32 bits data.
+  AccessS3SaveWidth64,                                      ///< Save 64 bits data.
+} ACCESS_WIDTH;
+
+/// AGESA struct name
+typedef enum {
+  // AGESA BASIC FUNCTIONS
+  AMD_INIT_RECOVERY = 0x00020000,                           ///< AmdInitRecovery entry point handle
+  AMD_CREATE_STRUCT,                                        ///< AmdCreateStruct handle
+  AMD_INIT_EARLY,                                           ///< AmdInitEarly entry point handle
+  AMD_INIT_ENV,                                             ///< AmdInitEnv entry point handle
+  AMD_INIT_LATE,                                            ///< AmdInitLate entry point handle
+  AMD_INIT_MID,                                             ///< AmdInitMid entry point handle
+  AMD_INIT_POST,                                            ///< AmdInitPost entry point handle
+  AMD_INIT_RESET,                                           ///< AmdInitReset entry point handle
+  AMD_INIT_RESUME,                                          ///< AmdInitResume entry point handle
+  AMD_RELEASE_STRUCT,                                       ///< AmdReleaseStruct handle
+  AMD_S3LATE_RESTORE,                                       ///< AmdS3LateRestore entry point handle
+  AMD_S3_SAVE,                                              ///< AmdS3Save entry point handle
+  AMD_GET_APIC_ID,                                          ///< AmdGetApicId entry point handle
+  AMD_GET_PCI_ADDRESS,                                      ///< AmdGetPciAddress entry point handle
+  AMD_IDENTIFY_CORE,                                        ///< AmdIdentifyCore general service handle
+  AMD_READ_EVENT_LOG,                                       ///< AmdReadEventLog general service handle
+  AMD_GET_EXECACHE_SIZE,                                    ///< AmdGetAvailableExeCacheSize general service handle
+  AMD_LATE_RUN_AP_TASK,                                     ///< AmdLateRunApTask entry point handle
+  AMD_IDENTIFY_DIMMS                                        ///< AmdIdentifyDimm general service handle
+} AGESA_STRUCT_NAME;
+
+  /*  ResetType constant values */
+#define WARM_RESET_WHENEVER 1
+#define COLD_RESET_WHENEVER 2
+#define WARM_RESET_IMMEDIATELY 3
+#define COLD_RESET_IMMEDIATELY 4
+
+
+// AGESA Structures
+
+/// The standard header for all AGESA services.
+/// For internal AGESA naming conventions, see @ref amdconfigparamname .
+typedef struct {
+  IN       UINT32          ImageBasePtr;     ///< The AGESA Image base address.
+  IN       UINT32          Func;             ///< The service desired
+  IN       UINT32          AltImageBasePtr;  ///< Alternate Image location
+  IN       CALLOUT_ENTRY   CalloutPtr;       ///< For Callout from AGESA
+  IN       UINT8           HeapStatus;       ///< For heap status from boot time slide.
+  IN       UINT64          HeapBasePtr;      ///< Location of the heap
+  IN OUT   UINT8           Reserved[7];      ///< This space is reserved for future use.
+} AMD_CONFIG_PARAMS;
+
+
+/// Create Struct Interface.
+typedef struct {
+  IN       AMD_CONFIG_PARAMS   StdHeader;          ///< Standard configuration header
+  IN       AGESA_STRUCT_NAME   AgesaFunctionName;  ///< The service to init
+  IN       ALLOCATION_METHOD   AllocationMethod;   ///< How to handle buffer allocation
+  IN OUT   UINT32              NewStructSize;      ///< The size of the allocated data, in for ByHost, else out only.
+  IN OUT   VOID                *NewStructPtr;      ///< The struct for the service.
+                                                   ///< The struct to init for ByHost allocation,
+                                                   ///< the initialized struct on return.
+} AMD_INTERFACE_PARAMS;
+
+#define FUNC_0    0   // bit-placed for PCI address creation
+#define FUNC_1    1
+#define FUNC_2    2
+#define FUNC_3    3
+#define FUNC_4    4
+#define FUNC_5    5
+#define FUNC_6    6
+#define FUNC_7    7
+
+/// AGESA Binary module header structure
+typedef struct {
+  IN  UINT32  Signature;                          ///< Binary Signature
+  IN  CHAR8   CreatorID[8];                       ///< 8 characters ID
+  IN  CHAR8   Version[12];                        ///< 12 characters version
+  IN  UINT32  ModuleInfoOffset;                   ///< Offset of module
+  IN  UINT32  EntryPointAddress;                  ///< Entry address
+  IN  UINT32  ImageBase;                          ///< Image base
+  IN  UINT32  RelocTableOffset;                   ///< Relocate Table offset
+  IN  UINT32  ImageSize;                          ///< Size
+  IN  UINT16  Checksum;                           ///< Checksum
+  IN  UINT8   ImageType;                          ///< Type
+  IN  UINT8   V_Reserved;                         ///< Reserved
+} AMD_IMAGE_HEADER;
+/// AGESA Binary module header structure
+typedef struct _AMD_MODULE_HEADER {
+  IN  UINT32          ModuleHeaderSignature;      ///< Module signature
+  IN  CHAR8           ModuleIdentifier[8];        ///< 8 characters ID
+  IN  CHAR8           ModuleVersion[12];          ///< 12 characters version
+  IN  VOID            *ModuleDispatcher;          ///< A pointer point to dispatcher
+  IN  struct _AMD_MODULE_HEADER  *NextBlock;      ///< Next module header link
+} AMD_MODULE_HEADER;
+
+// AMD_CODE_HEADER Signatures.
+#define AGESA_CODE_SIGNATURE  {'!', '!', 'A', 'G', 'E', 'S', 'A', ' '}
+#define CIMXNB_CODE_SIGNATURE {'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'}
+#define CIMXSB_CODE_SIGNATURE {'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'}
+
+/// AGESA_CODE_SIGNATURE
+typedef struct {
+  IN  CHAR8   Signature[8];                       ///< code header Signature
+  IN  CHAR8   ComponentName[8];                   ///< 8 character name of the code module
+  IN  CHAR8   Version[12];                        ///< 12 character version string
+  IN  CHAR8   TerminatorNull;                     ///< null terminated string
+  IN  CHAR8   VerReserved[7];                     ///< reserved space
+} AMD_CODE_HEADER;
+
+/// Extended PCI address format
+typedef struct {
+  IN OUT  UINT32      Register:12;                ///< Register offset
+  IN OUT  UINT32      Function:3;                 ///< Function number
+  IN OUT  UINT32      Device:5;                   ///< Device number
+  IN OUT  UINT32      Bus:8;                      ///< Bus number
+  IN OUT  UINT32      Segment:4;                  ///< Segment
+} EXT_PCI_ADDR;
+
+/// Union type for PCI address
+typedef union _PCI_ADDR {
+  IN  UINT32          AddressValue;               ///< Formal address
+  IN  EXT_PCI_ADDR    Address;                    ///< Extended address
+} PCI_ADDR;
+
+//   SBDFO - Segment Bus Device Function Offset
+//   31:28   Segment (4-bits)
+//   27:20   Bus     (8-bits)
+//   19:15   Device  (5-bits)
+//   14:12   Function(3-bits)
+//   11:00   Offset  (12-bits)
+
+#define MAKE_SBDFO(Seg, Bus, Dev, Fun, Off) ((((UINT32) (Seg)) << 28) | (((UINT32) (Bus)) << 20) | \
+                   (((UINT32)(Dev)) << 15) | (((UINT32)(Fun)) << 12) | ((UINT32)(Off)))
+#define ILLEGAL_SBDFO 0xFFFFFFFF
+
+/// CPUID data received registers format
+typedef struct {
+  OUT UINT32          EAX_Reg;                    ///< CPUID instruction result in EAX
+  OUT UINT32          EBX_Reg;                    ///< CPUID instruction result in EBX
+  OUT UINT32          ECX_Reg;                    ///< CPUID instruction result in ECX
+  OUT UINT32          EDX_Reg;                    ///< CPUID instruction result in EDX
+} CPUID_DATA;
+
+/// HT frequency for external callbacks
+typedef enum {
+  HT_FREQUENCY_200M          = 0,                 ///< HT speed 200 for external callbacks
+  HT_FREQUENCY_400M          = 2,                 ///< HT speed 400 for external callbacks
+  HT_FREQUENCY_600M          = 4,                 ///< HT speed 600 for external callbacks
+  HT_FREQUENCY_800M          = 5,                 ///< HT speed 800 for external callbacks
+  HT_FREQUENCY_1000M         = 6,                 ///< HT speed 1000 for external callbacks
+  HT_FREQUENCY_1200M         = 7,                 ///< HT speed 1200 for external callbacks
+  HT_FREQUENCY_1400M         = 8,                 ///< HT speed 1400 for external callbacks
+  HT_FREQUENCY_1600M         = 9,                 ///< HT speed 1600 for external callbacks
+  HT_FREQUENCY_1800M         = 10,                ///< HT speed 1800 for external callbacks
+  HT_FREQUENCY_2000M         = 11,                ///< HT speed 2000 for external callbacks
+  HT_FREQUENCY_2200M         = 12,                ///< HT speed 2200 for external callbacks
+  HT_FREQUENCY_2400M         = 13,                ///< HT speed 2400 for external callbacks
+  HT_FREQUENCY_2600M         = 14,                ///< HT speed 2600 for external callbacks
+  HT_FREQUENCY_2800M         = 17,                ///< HT speed 2800 for external callbacks
+  HT_FREQUENCY_3000M         = 18,                ///< HT speed 3000 for external callbacks
+  HT_FREQUENCY_3200M         = 19,                ///< HT speed 3200 for external callbacks
+  HT_FREQUENCY_MAX                                ///< Limit check.
+} HT_FREQUENCIES;
+// The minimum HT3 frequency
+#define HT3_FREQUENCY_MIN HT_FREQUENCY_1200M
+
+#ifndef BIT0
+  #define BIT0        0x0000000000000001ull
+#endif
+#ifndef BIT1
+  #define BIT1        0x0000000000000002ull
+#endif
+#ifndef BIT2
+  #define BIT2        0x0000000000000004ull
+#endif
+#ifndef BIT3
+  #define BIT3        0x0000000000000008ull
+#endif
+#ifndef BIT4
+  #define BIT4        0x0000000000000010ull
+#endif
+#ifndef BIT5
+  #define BIT5        0x0000000000000020ull
+#endif
+#ifndef BIT6
+  #define BIT6        0x0000000000000040ull
+#endif
+#ifndef BIT7
+  #define BIT7        0x0000000000000080ull
+#endif
+#ifndef BIT8
+  #define BIT8        0x0000000000000100ull
+#endif
+#ifndef BIT9
+  #define BIT9        0x0000000000000200ull
+#endif
+#ifndef BIT10
+  #define BIT10       0x0000000000000400ull
+#endif
+#ifndef BIT11
+  #define BIT11       0x0000000000000800ull
+#endif
+#ifndef BIT12
+  #define BIT12       0x0000000000001000ull
+#endif
+#ifndef BIT13
+  #define BIT13       0x0000000000002000ull
+#endif
+#ifndef BIT14
+  #define BIT14       0x0000000000004000ull
+#endif
+#ifndef BIT15
+  #define BIT15       0x0000000000008000ull
+#endif
+#ifndef BIT16
+  #define BIT16       0x0000000000010000ull
+#endif
+#ifndef BIT17
+  #define BIT17       0x0000000000020000ull
+#endif
+#ifndef BIT18
+  #define BIT18       0x0000000000040000ull
+#endif
+#ifndef BIT19
+  #define BIT19       0x0000000000080000ull
+#endif
+#ifndef BIT20
+  #define BIT20       0x0000000000100000ull
+#endif
+#ifndef BIT21
+  #define BIT21       0x0000000000200000ull
+#endif
+#ifndef BIT22
+  #define BIT22       0x0000000000400000ull
+#endif
+#ifndef BIT23
+  #define BIT23       0x0000000000800000ull
+#endif
+#ifndef BIT24
+  #define BIT24       0x0000000001000000ull
+#endif
+#ifndef BIT25
+  #define BIT25       0x0000000002000000ull
+#endif
+#ifndef BIT26
+  #define BIT26       0x0000000004000000ull
+#endif
+#ifndef BIT27
+  #define BIT27       0x0000000008000000ull
+#endif
+#ifndef BIT28
+  #define BIT28       0x0000000010000000ull
+#endif
+#ifndef BIT29
+  #define BIT29       0x0000000020000000ull
+#endif
+#ifndef BIT30
+  #define BIT30       0x0000000040000000ull
+#endif
+#ifndef BIT31
+  #define BIT31       0x0000000080000000ull
+#endif
+#ifndef BIT32
+  #define BIT32       0x0000000100000000ull
+#endif
+#ifndef BIT33
+  #define BIT33       0x0000000200000000ull
+#endif
+#ifndef BIT34
+  #define BIT34       0x0000000400000000ull
+#endif
+#ifndef BIT35
+  #define BIT35       0x0000000800000000ull
+#endif
+#ifndef BIT36
+  #define BIT36       0x0000001000000000ull
+#endif
+#ifndef BIT37
+  #define BIT37       0x0000002000000000ull
+#endif
+#ifndef BIT38
+  #define BIT38       0x0000004000000000ull
+#endif
+#ifndef BIT39
+  #define BIT39       0x0000008000000000ull
+#endif
+#ifndef BIT40
+  #define BIT40       0x0000010000000000ull
+#endif
+#ifndef BIT41
+  #define BIT41       0x0000020000000000ull
+#endif
+#ifndef BIT42
+  #define BIT42       0x0000040000000000ull
+#endif
+#ifndef BIT43
+  #define BIT43       0x0000080000000000ull
+#endif
+#ifndef BIT44
+  #define BIT44       0x0000100000000000ull
+#endif
+#ifndef BIT45
+  #define BIT45       0x0000200000000000ull
+#endif
+#ifndef BIT46
+  #define BIT46       0x0000400000000000ull
+#endif
+#ifndef BIT47
+  #define BIT47       0x0000800000000000ull
+#endif
+#ifndef BIT48
+  #define BIT48       0x0001000000000000ull
+#endif
+#ifndef BIT49
+  #define BIT49       0x0002000000000000ull
+#endif
+#ifndef BIT50
+  #define BIT50       0x0004000000000000ull
+#endif
+#ifndef BIT51
+  #define BIT51       0x0008000000000000ull
+#endif
+#ifndef BIT52
+  #define BIT52       0x0010000000000000ull
+#endif
+#ifndef BIT53
+  #define BIT53       0x0020000000000000ull
+#endif
+#ifndef BIT54
+  #define BIT54       0x0040000000000000ull
+#endif
+#ifndef BIT55
+  #define BIT55       0x0080000000000000ull
+#endif
+#ifndef BIT56
+  #define BIT56       0x0100000000000000ull
+#endif
+#ifndef BIT57
+  #define BIT57       0x0200000000000000ull
+#endif
+#ifndef BIT58
+  #define BIT58       0x0400000000000000ull
+#endif
+#ifndef BIT59
+  #define BIT59       0x0800000000000000ull
+#endif
+#ifndef BIT60
+  #define BIT60       0x1000000000000000ull
+#endif
+#ifndef BIT61
+  #define BIT61       0x2000000000000000ull
+#endif
+#ifndef BIT62
+  #define BIT62       0x4000000000000000ull
+#endif
+#ifndef BIT63
+  #define BIT63       0x8000000000000000ull
+#endif
+
+#endif // _AMD_H_
diff --git a/src/vendorcode/amd/agesa/f15/Dispatcher.h b/src/vendorcode/amd/agesa/f15/Dispatcher.h
new file mode 100644
index 0000000000..b99ae779d5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Dispatcher.h
@@ -0,0 +1,52 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Pushhigh Interface
+ *
+ * Contains interface to Pushhigh entry
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Legacy
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ */
+
+#ifndef _DISPATCHER_H_
+#define _DISPATCHER_H_
+
+// AGESA function prototypes
+AGESA_STATUS CALLCONV AmdAgesaDispatcher ( IN OUT VOID *ConfigPtr );
+AGESA_STATUS CALLCONV AmdAgesaCallout ( IN UINT32 Func, IN UINT32 Data, IN OUT VOID *ConfigPtr );
+
+#endif // _DISPATCHER_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/AdvancedApi.h b/src/vendorcode/amd/agesa/f15/Include/AdvancedApi.h
new file mode 100644
index 0000000000..68608974df
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/AdvancedApi.h
@@ -0,0 +1,167 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Advanced API Interface for HT, Memory and CPU
+ *
+ * Contains additional declarations need to use HT, Memory and CPU Advanced interface, such as
+ * would be required by the basic interface implementations.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Include
+ * @e \$Revision: 52180 $   @e \$Date: 2011-05-03 05:17:25 -0600 (Tue, 03 May 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+
+#ifndef _ADVANCED_API_H_
+#define _ADVANCED_API_H_
+
+/*----------------------------------------------------------------------------
+ *                           HT FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * A constructor for the HyperTransport input structure.
+ *
+ * Sets inputs to valid, basic level, defaults.
+ *
+ * @param[in]   StdHeader       Opaque handle to standard config header
+ * @param[in]   AmdHtInterface  HT Interface structure to initialize.
+ *
+ * @retval AGESA_SUCCESS      Constructors are not allowed to fail
+*/
+AGESA_STATUS
+AmdHtInterfaceConstructor (
+  IN       AMD_CONFIG_PARAMS    *StdHeader,
+  IN       AMD_HT_INTERFACE     *AmdHtInterface
+  );
+
+/**
+ * The top level external interface for Hypertransport Initialization.
+ *
+ * Create our initial internal state, initialize the coherent fabric,
+ * initialize the non-coherent chains, and perform any required fabric tuning or
+ * optimization.
+ *
+ * @param[in]   StdHeader              Opaque handle to standard config header
+ * @param[in]   PlatformConfiguration  The platform configuration options.
+ * @param[in]   AmdHtInterface         HT Interface structure.
+ *
+ * @retval      AGESA_SUCCESS     Only information events logged.
+ * @retval      AGESA_ALERT       Sync Flood or CRC error logged.
+ * @retval      AGESA_WARNING     Example: expected capability not found
+ * @retval      AGESA_ERROR       logged events indicating some devices may not be available
+ * @retval      AGESA_FATAL       Mixed Family or MP capability mismatch
+ *
+ */
+AGESA_STATUS
+AmdHtInitialize (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfiguration,
+  IN       AMD_HT_INTERFACE       *AmdHtInterface
+  );
+
+/*----------------------------------------------------------------------------
+ *                        HT Recovery   FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * A constructor for the HyperTransport input structure.
+ *
+ */
+AGESA_STATUS
+AmdHtResetConstructor (
+  IN       AMD_CONFIG_PARAMS         *StdHeader,
+  IN       AMD_HT_RESET_INTERFACE    *AmdHtResetInterface
+  );
+
+/**
+ * Initialize HT at Reset for both Normal and Recovery.
+ *
+ */
+AGESA_STATUS
+AmdHtInitReset (
+  IN       AMD_CONFIG_PARAMS        *StdHeader,
+  IN       AMD_HT_RESET_INTERFACE   *AmdHtResetInterface
+  );
+
+/**
+ * Initialize the Node and Socket maps for an AP Core.
+ *
+ */
+AGESA_STATUS
+AmdHtInitRecovery (
+  IN       AMD_CONFIG_PARAMS           *StdHeader
+  );
+
+///----------------------------------------------------------------------------
+///                          MEMORY FUNCTIONS PROTOTYPE
+///
+///----------------------------------------------------------------------------
+
+AGESA_STATUS
+AmdMemRecovery (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+AGESA_STATUS
+AmdMemAuto (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID
+AmdMemInitDataStructDef (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT  PLATFORM_CONFIGURATION   *PlatFormConfig
+  );
+
+VOID
+memDefRet ( VOID );
+
+BOOLEAN
+memDefTrue ( VOID );
+
+BOOLEAN
+memDefFalse ( VOID );
+
+VOID
+MemRecDefRet ( VOID );
+
+BOOLEAN
+MemRecDefTrue ( VOID );
+
+#endif // _ADVANCED_API_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/CommonReturns.h b/src/vendorcode/amd/agesa/f15/Include/CommonReturns.h
new file mode 100644
index 0000000000..b59de4b619
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/CommonReturns.h
@@ -0,0 +1,125 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Common Return routines.
+ *
+ * Routines which do nothing, returning a result (preferably some version of zero) which
+ * is consistent with "do nothing" or "default".  Useful for function pointer tables.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Common
+ * @e \$Revision: 54372 $   @e \$Date: 2011-06-07 22:22:22 -0600 (Tue, 07 Jun 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _COMMON_RETURNS_H_
+#define _COMMON_RETURNS_H_
+
+
+/**
+* Return True
+*
+* @retval True    Default case, no special action
+*/
+BOOLEAN
+CommonReturnTrue ( VOID );
+
+/**
+* Return False.
+*
+* @retval FALSE    Default case, no special action
+*/
+BOOLEAN
+CommonReturnFalse ( VOID );
+
+/**
+ * Return (UINT8)zero.
+ *
+ *
+ * @retval zero    None, or only case zero.
+ */
+UINT8
+CommonReturnZero8 ( VOID );
+
+/**
+ * Return (UINT32)zero.
+ *
+ *
+ * @retval zero    None, or only case zero.
+ */
+UINT32
+CommonReturnZero32 ( VOID );
+
+/**
+ * Return (UINT64)zero.
+ *
+ *
+ * @retval zero    None, or only case zero.
+ */
+UINT64
+CommonReturnZero64 ( VOID );
+
+/**
+ * Return NULL
+ *
+ * @retval NULL    pointer to nothing
+ */
+VOID *
+CommonReturnNULL ( VOID );
+
+/**
+* Return AGESA_SUCCESS.
+*
+* @retval AGESA_SUCCESS Success.
+*/
+AGESA_STATUS
+CommonReturnAgesaSuccess ( VOID );
+
+/**
+ * Do Nothing.
+ *
+ */
+VOID
+CommonVoid ( VOID );
+
+/**
+ * ASSERT if this routine is called.
+ *
+ */
+VOID
+CommonAssert ( VOID );
+
+#endif // _COMMON_RETURNS_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/Filecode.h b/src/vendorcode/amd/agesa/f15/Include/Filecode.h
new file mode 100644
index 0000000000..0d9f67af11
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/Filecode.h
@@ -0,0 +1,1174 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Collectively assign unique filecodes for assert and debug to each source file.
+ *
+ * Publish values for decorated filenames, which can be used for
+ * ASSERT and debug support using a preprocessor define like:
+ * @n <tt> \#define FILECODE MY_C_FILENAME_FILECODE </tt> @n
+ * This file serves as a reference for debugging to associate the code and filename.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Include
+ * @e \$Revision: 56033 $   @e \$Date: 2011-07-06 01:12:20 -0600 (Wed, 06 Jul 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _FILECODE_H_
+#define _FILECODE_H_
+
+#define UNASSIGNED_FILE_FILECODE                                         (0xFFFF)
+
+/// For debug use in any Platform's options C file.
+/// Can be reused for platforms and image builds, since only one options file can be built.
+#define PLATFORM_SPECIFIC_OPTIONS_FILECODE                               (0xBBBB)
+
+
+#define PROC_GNB_COMMON_GNBLIBFEATURES_FILECODE                          (0xA001)
+#define PROC_GNB_GFX_FAMILY_LN_F12GFXSERVICES_FILECODE                   (0xA002)
+#define PROC_GNB_GFX_FAMILY_ON_F14GFXSERVICES_FILECODE                   (0xA003)
+#define PROC_GNB_GFX_GFXCONFIGDATA_FILECODE                              (0xA004)
+#define PROC_GNB_GFX_GFXGMCINIT_FILECODE                                 (0xA006)
+#define PROC_GNB_GFX_GFXINITATENVPOST_FILECODE                           (0xA010)
+#define PROC_GNB_GFX_GFXINITATMIDPOST_FILECODE                           (0xA011)
+#define PROC_GNB_GFX_GFXINITATPOST_FILECODE                              (0xA012)
+#define PROC_GNB_GFX_GFXINTEGRATEDINFOTABLEINIT_FILECODE                 (0xA013)
+#define PROC_GNB_GFX_GFXLIB_FILECODE                                     (0xA014)
+#define PROC_GNB_GFX_GFXREGISTERACC_FILECODE                             (0xA015)
+#define PROC_GNB_GFX_GFXSTRAPSINIT_FILECODE                              (0xA016)
+#define PROC_GNB_GNBINITATEARLY_FILECODE                                 (0xA017)
+#define PROC_GNB_GNBINITATENV_FILECODE                                   (0xA020)
+#define PROC_GNB_GNBINITATLATE_FILECODE                                  (0xA021)
+#define PROC_GNB_GNBINITATMID_FILECODE                                   (0xA022)
+#define PROC_GNB_GNBINITATPOST_FILECODE                                  (0xA023)
+#define PROC_GNB_GNBINITATRESET_FILECODE                                 (0xA024)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIB_FILECODE                    (0xA025)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBCPUACC_FILECODE              (0xA026)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBHEAP_FILECODE                (0xA027)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBIOACC_FILECODE               (0xA028)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBMEMACC_FILECODE              (0xA029)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCI_FILECODE                 (0xA02A)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCIACC_FILECODE              (0xA030)
+#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXCARDINFO_FILECODE            (0xA031)
+#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXENUMCONNECTORS_FILECODE      (0xA032)
+#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXPOWERPLAYTABLE_FILECODE      (0xA033)
+#define PROC_GNB_MODULES_GNBNBINITLIBV1_GNBNBINITLIBV1_FILECODE          (0xA034)
+#define PROC_GNB_MODULES_GNBPCIEALIBV1_PCIEALIB_FILECODE                 (0xA035)
+#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGDATA_FILECODE           (0xA036)
+#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGLIB_FILECODE            (0xA037)
+#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIEINPUTPARSER_FILECODE          (0xA038)
+#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIEMAPTOPOLOGY_FILECODE          (0xA039)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPM_FILECODE              (0xA03A)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPMBLACKLIST_FILECODE     (0xA03B)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPMEXITLATENCY_FILECODE   (0xA03C)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPHYSERVICES_FILECODE       (0xA03D)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPIFSERVICES_FILECODE       (0xA03E)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTREGACC_FILECODE        (0xA03F)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTSERVICES_FILECODE      (0xA041)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPOWERMGMT_FILECODE         (0xA043)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIESILICONSERVICES_FILECODE   (0xA045)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETIMER_FILECODE             (0xA046)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETOPOLOGYSERVICES_FILECODE  (0xA047)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEUTILITYLIB_FILECODE        (0xA048)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEWRAPPERREGACC_FILECODE     (0xA049)
+#define PROC_GNB_MODULES_GNBPCIETRAININGV1_PCIETRAINING_FILECODE         (0xA04A)
+#define PROC_GNB_MODULES_GNBPCIETRAININGV1_PCIEWORKAROUNDS_FILECODE      (0xA04B)
+#define PROC_GNB_NB_FAMILY_LN_F12NBPOWERGATE_FILECODE                  (0xA04C)
+#define PROC_GNB_NB_FAMILY_LN_F12NBSERVICES_FILECODE                   (0xA04D)
+#define PROC_GNB_NB_FAMILY_LN_F12NBSMU_FILECODE                        (0xA04E)
+#define PROC_GNB_NB_FAMILY_ON_F14NBLCLKNCLKRATIO_FILECODE                (0xA04F)
+#define PROC_GNB_NB_FAMILY_ON_F14NBPOWERGATE_FILECODE                    (0xA050)
+#define PROC_GNB_NB_FAMILY_ON_F14NBSERVICES_FILECODE                     (0xA051)
+#define PROC_GNB_NB_FAMILY_ON_F14NBSMU_FILECODE                          (0xA052)
+#define PROC_GNB_NB_FEATURE_NBFUSETABLE_FILECODE                         (0xA053)
+#define PROC_GNB_NB_FEATURE_NBLCLKDPM_FILECODE                           (0xA054)
+#define PROC_GNB_NB_FAMILY_LN_F12NBLCLKDPM_FILECODE                    (0xA055)
+#define PROC_GNB_NB_FAMILY_ON_F14NBLCLKDPM_FILECODE                      (0xA056)
+#define PROC_GNB_NB_NBCONFIGDATA_FILECODE                                (0xA060)
+#define PROC_GNB_NB_NBINIT_FILECODE                                      (0xA061)
+#define PROC_GNB_NB_NBINITATEARLY_FILECODE                               (0xA062)
+#define PROC_GNB_NB_NBINITATENV_FILECODE                                 (0xA063)
+#define PROC_GNB_NB_NBINITATLATEPOST_FILECODE                            (0xA070)
+#define PROC_GNB_NB_NBINITATPOST_FILECODE                                (0xA071)
+#define PROC_GNB_NB_NBINITATRESET_FILECODE                               (0xA072)
+#define PROC_GNB_NB_NBPOWERMGMT_FILECODE                                 (0xA073)
+#define PROC_GNB_NB_NBSMULIB_FILECODE                                    (0xA074)
+#define PROC_GNB_PCIE_FAMILY_LN_F12PCIEALIB_FILECODE                   (0xA075)
+#define PROC_GNB_PCIE_FAMILY_LN_F12PCIECOMPLEXCONFIG_FILECODE          (0xA076)
+#define PROC_GNB_PCIE_FAMILY_LN_F12PCIECOMPLEXSERVICES_FILECODE        (0xA077)
+#define PROC_GNB_PCIE_FAMILY_LN_F12PCIEPHYSERVICES_FILECODE            (0xA078)
+#define PROC_GNB_PCIE_FAMILY_LN_F12PCIEPIFSERVICES_FILECODE            (0xA079)
+#define PROC_GNB_PCIE_FAMILY_LN_F12PCIEWRAPPERSERVICES_FILECODE        (0xA07A)
+#define PROC_GNB_PCIE_FAMILY_ON_F14PCIEALIB_FILECODE                     (0xA07D)
+#define PROC_GNB_PCIE_FAMILY_ON_F14PCIECOMPLEXCONFIG_FILECODE            (0xA07E)
+#define PROC_GNB_PCIE_FAMILY_ON_F14PCIECOMPLEXSERVICES_FILECODE          (0xA07F)
+#define PROC_GNB_PCIE_FAMILY_ON_F14PCIEPHYSERVICES_FILECODE              (0xA080)
+#define PROC_GNB_PCIE_FAMILY_ON_F14PCIEPIFSERVICES_FILECODE              (0xA081)
+#define PROC_GNB_PCIE_FAMILY_ON_F14PCIEWRAPPERSERVICES_FILECODE          (0xA082)
+#define PROC_GNB_PCIE_FEATURE_PCIEPOWERGATE_FILECODE                     (0xA083)
+#define PROC_GNB_PCIE_PCIEINIT_FILECODE                                  (0xA084)
+#define PROC_GNB_PCIE_PCIEINITATEARLYPOST_FILECODE                       (0xA085)
+#define PROC_GNB_PCIE_PCIEINITATENV_FILECODE                             (0xA086)
+#define PROC_GNB_PCIE_PCIEINITATLATEPOST_FILECODE                        (0xA087)
+#define PROC_GNB_PCIE_PCIEINITATPOST_FILECODE                            (0xA088)
+#define PROC_GNB_PCIE_PCIELATEINIT_FILECODE                              (0xA089)
+#define PROC_GNB_PCIE_PCIEPORTINIT_FILECODE                              (0xA08B)
+#define PROC_GNB_PCIE_PCIEPORTLATEINIT_FILECODE                          (0xA08C)
+#define PROC_GNB_MODULES_GNBCABLESAFE_GNBCABLESAFE_FILECODE              (0xA08D)
+#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGENV_FILECODE              (0xA08E)
+#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGPOST_FILECODE             (0xA08F)
+#define PROC_GNB_MODULES_GNBTABLE_GNBTABLE_FILECODE                      (0xA090)
+#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GNBGFXINITLIBV1_FILECODE        (0xA091)
+#define PROC_GNB_MODULES_GNBINITTN_GFXENVINITTN_FILECODE                 (0xA092)
+#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGLIB_FILECODE              (0xA093)
+#define PROC_GNB_MODULES_GNBINITTN_GFXGMCINITTN_FILECODE                 (0xA094)
+#define PROC_GNB_MODULES_GNBINITTN_GFXINTEGRATEDINFOTABLETN_FILECODE     (0xA095)
+#define PROC_GNB_MODULES_GNBINITTN_GFXLIBTN_FILECODE                     (0xA096)
+#define PROC_GNB_MODULES_GNBINITTN_GFXMIDINITTN_FILECODE                 (0xA097)
+#define PROC_GNB_MODULES_GNBINITTN_GNBPOSTINITTN_FILECODE                (0xA098)
+#define PROC_GNB_MODULES_GNBINITTN_GNBEARLYINITTN_FILECODE               (0xA09A)
+#define PROC_GNB_MODULES_GNBINITTN_GNBENVINITTN_FILECODE                 (0xA09B)
+#define PROC_GNB_MODULES_GNBINITTN_GNBFUSETABLETN_FILECODE               (0xA09C)
+#define PROC_GNB_MODULES_GNBINITTN_GNBMIDINITTN_FILECODE                 (0xA09D)
+#define PROC_GNB_MODULES_GNBINITTN_GFXPOSTINITTN_FILECODE                (0xA09E)
+#define PROC_GNB_MODULES_GNBINITTN_GNBREGISTERACCTN_FILECODE             (0xA09F)
+#define PROC_GNB_MODULES_GNBINITTN_PCIECONFIGTN_FILECODE                 (0xA0A0)
+#define PROC_GNB_MODULES_GNBINITTN_PCIEEARLYINITTN_FILECODE              (0xA0A1)
+#define PROC_GNB_MODULES_GNBINITTN_PCIEENVINITTN_FILECODE                (0xA0A2)
+#define PROC_GNB_MODULES_GNBINITTN_PCIELIBTN_FILECODE                    (0xA0A3)
+#define PROC_GNB_MODULES_GNBINITTN_PCIEMIDINITTN_FILECODE                (0xA0A4)
+#define PROC_GNB_MODULES_GNBINITTN_PCIEPOSTINITTN_FILECODE               (0xA0A5)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEWRAPPERSERVICESV4_FILECODE (0xA0A6)
+#define PROC_GNB_MODULES_GNBIOMMUIVRS_GNBIOMMUIVRS_FILECODE              (0xA0A7)
+#define PROC_GNB_MODULES_GNBIVRSLIB_GNBIVRSLIB_FILECODE                  (0xA0A8)
+#define PROC_GNB_MODULES_GNBNBINITLIBV4_GNBNBINITLIBV4_FILECODE          (0xA0A9)
+#define PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBPCIETRANSLATION_FILECODE   (0xA0AA)
+#define PROC_GNB_MODULES_GNBINITTN_GNBIOMMUIVRSTN_FILECODE               (0xA0AB)
+#define PROC_GNB_GFX_FAMILY_KR_KRGFXSERVICES_FILECODE                    (0xA0AC)
+#define PROC_GNB_NB_FAMILY_KR_KRNBSMU_FILECODE                           (0xA0AD)
+#define PROC_GNB_NB_FAMILY_KR_KRNBPOWERGATE_FILECODE                     (0xA0AE)
+#define PROC_GNB_NB_FAMILY_KR_KRNBSERVICES_FILECODE                      (0xA0AF)
+#define PROC_GNB_NB_FAMILY_KR_KRNBLCLKNCLKRATIO_FILECODE                 (0xA0B0)
+#define PROC_GNB_NB_FAMILY_KR_KRNBLCLKDPM_FILECODE                       (0xA0B1)
+#define PROC_GNB_PCIE_FAMILY_KR_KRPCIEALIB_FILECODE                      (0xA0B2)
+#define PROC_GNB_PCIE_FAMILY_KR_KRPCIECOMPLEXCONFIG_FILECODE             (0xA0B3)
+#define PROC_GNB_PCIE_FAMILY_KR_KRPCIECOMPLEXSERVICES_FILECODE           (0xA0B4)
+#define PROC_GNB_PCIE_FAMILY_KR_KRPCIEPHYSERVICES_FILECODE               (0xA0B5)
+#define PROC_GNB_PCIE_FAMILY_KR_KRPCIEWRAPPERSERVICES_FILECODE           (0xA0B6)
+#define PROC_GNB_PCIE_FAMILY_KR_KRPCIEPIFSERVICES_FILECODE               (0xA0B7)
+#define PROC_GNB_MODULES_GNBINITTN_PCIEPOWERGATETN_FILECODE              (0xA0B8)
+#define PROC_GNB_MODULES_GNBINITTN_PCIEALIBTN_FILECODE                   (0xA0B9)
+#define PROC_GNB_MODULES_GNBSBLIB_GNBSBPCIE_FILECODE                     (0xA0BA)
+#define PROC_GNB_MODULES_GNBSBLIB_GNBSBLIB_FILECODE                      (0xA0BB)
+#define PROC_GNB_MODULES_GNBSBIOMMULIB_GNBSBIOMMULIB_FILECODE            (0xA0BC)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBSTALL_FILECODE               (0xA0BD)
+#define PROC_GNB_MODULES_GNBMSOCKETLIB_GNBMSOCKETLIB_FILECODE            (0xA0BE)
+#define PROC_GNB_MODULES_GNBSSOCKETLIB_GNBSSOCKETLIB_FILECODE            (0xA0BF)
+#define PROC_GNB_MODULES_GNBPCIECONFIG_GNBHANDLELIB_FILECODE             (0xA0C0)
+
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPHYSERVICESV5_FILECODE     (0xA0C5)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPIFSERVICESV5_FILECODE     (0xA0C6)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPORTSERVICESV5_FILECODE    (0xA0C7)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPOWERMGMTV5_FILECODE       (0xA0C8)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIESILICONSERVICESV5_FILECODE (0xA0C9)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEWRAPPERSERVICESV5_FILECODE (0xA0CA)
+#define PROC_GNB_MODULES_GNBNBINITLIBV5_GNBNBINITLIBV5_FILECODE          (0xA0CB)
+
+#define PROC_GNB_MODULES_GNBINITKM_GNBEARLYINITKM_FILECODE               (0xA0CC)
+#define PROC_GNB_MODULES_GNBINITKM_GNBENVINITKM_FILECODE                 (0xA0CD)
+#define PROC_GNB_MODULES_GNBINITKM_GNBIOMMUIVRSKM_FILECODE               (0xA0CE)
+#define PROC_GNB_MODULES_GNBINITKM_GNBMIDINITKM_FILECODE                 (0xA0CF)
+#define PROC_GNB_MODULES_GNBINITKM_GNBPOSTINITKM_FILECODE                (0xA0D0)
+#define PROC_GNB_MODULES_GNBINITKM_GNBREGISTERACCKM_FILECODE             (0xA0D1)
+#define PROC_GNB_MODULES_GNBINITKM_PCIECOMPLEXDATAKMC2012_FILECODE       (0xA0D2)
+#define PROC_GNB_MODULES_GNBINITKM_PCIECOMPLEXDATAKMFM2_FILECODE         (0xA0D3)
+#define PROC_GNB_MODULES_GNBINITKM_PCIECOMPLEXDATAKMG2012_FILECODE       (0xA0D4)
+#define PROC_GNB_MODULES_GNBINITKM_PCIECONFIGKM_FILECODE                 (0xA0D5)
+#define PROC_GNB_MODULES_GNBINITKM_PCIEEARLYINITKM_FILECODE              (0xA0D6)
+#define PROC_GNB_MODULES_GNBINITKM_PCIEENVINITKM_FILECODE                (0xA0D7)
+#define PROC_GNB_MODULES_GNBINITKM_PCIELIBKM_FILECODE                    (0xA0D8)
+#define PROC_GNB_MODULES_GNBINITKM_PCIEMIDINITKM_FILECODE                (0xA0D9)
+#define PROC_GNB_MODULES_GNBINITKM_PCIEPOSTINITKM_FILECODE               (0xA0DA)
+#define PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBTRANSLATION_FILECODE       (0xA0DB)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEPOWERMGMTV4_FILECODE       (0xA0DC)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEPORTSERVICESV4_FILECODE    (0xA0DD)
+
+#define PROC_RECOVERY_GNB_GNBRECOVERY_FILECODE                           (0xAE01)
+#define PROC_RECOVERY_GNB_NBINITRECOVERY_FILECODE                        (0xAE02)
+
+// FCH
+#define PROC_FCH_AZALIA_AZALIARESET_FILECODE                             (0xB001)
+#define PROC_FCH_AZALIA_AZALIAENV_FILECODE                               (0xB002)
+#define PROC_FCH_AZALIA_AZALIAMID_FILECODE                               (0xB003)
+#define PROC_FCH_AZALIA_AZALIALATE_FILECODE                              (0xB004)
+#define PROC_FCH_COMMON_ACPILIB_FILECODE                                 (0xB010)
+#define PROC_FCH_COMMON_FCHLIB_FILECODE                                  (0xB011)
+#define PROC_FCH_COMMON_FCHCOMMON_FILECODE                               (0xB012)
+#define PROC_FCH_COMMON_FCHCOMMONSMM_FILECODE                            (0xB013)
+#define PROC_FCH_COMMON_MEMLIB_FILECODE                                  (0xB014)
+#define PROC_FCH_COMMON_PCILIB_FILECODE                                  (0xB015)
+#define PROC_FCH_COMMON_FCHPELIB_FILECODE                                (0xB016)
+#define PROC_FCH_GEC_GECRESET_FILECODE                                   (0xB020)
+#define PROC_FCH_GEC_GECENV_FILECODE                                     (0xB021)
+#define PROC_FCH_GEC_GECMID_FILECODE                                     (0xB022)
+#define PROC_FCH_GEC_GECLATE_FILECODE                                    (0xB023)
+#define PROC_FCH_GEC_FAMILY_HUDSON2_HUDSON2GECSERVICE_FILECODE           (0xB024)
+#define PROC_FCH_GEC_FAMILY_HUDSON2_HUDSON2GECENVSERVICE_FILECODE        (0xB025)
+#define PROC_FCH_GEC_FAMILY_YUBA_YUBAGECSERVICE_FILECODE                 (0xB026)
+#define PROC_FCH_GEC_FAMILY_YUBA_YUBAGECENVSERVICE_FILECODE              (0xB027)
+#define PROC_FCH_HWACPI_HWACPIRESET_FILECODE                             (0xB030)
+#define PROC_FCH_HWACPI_HWACPIENV_FILECODE                               (0xB031)
+#define PROC_FCH_HWACPI_HWACPIMID_FILECODE                               (0xB032)
+#define PROC_FCH_HWACPI_HWACPILATE_FILECODE                              (0xB033)
+#define PROC_FCH_HWACPI_FAMILY_HUDSON2_HUDSON2HWACPIENVSERVICE_FILECODE  (0xB034)
+#define PROC_FCH_HWACPI_FAMILY_HUDSON2_HUDSON2HWACPIMIDSERVICE_FILECODE  (0xB035)
+#define PROC_FCH_HWACPI_FAMILY_HUDSON2_HUDSON2HWACPILATESERVICE_FILECODE (0xB036)
+#define PROC_FCH_HWACPI_FAMILY_HUDSON2_HUDSON2SSSERVICE_FILECODE         (0xB037)
+#define PROC_FCH_HWACPI_FAMILY_YUBA_YUBAHWACPIENVSERVICE_FILECODE        (0xB038)
+#define PROC_FCH_HWACPI_FAMILY_YUBA_YUBAHWACPIMIDSERVICE_FILECODE        (0xB039)
+#define PROC_FCH_HWACPI_FAMILY_YUBA_YUBAHWACPILATESERVICE_FILECODE       (0xB03A)
+#define PROC_FCH_HWACPI_FAMILY_YUBA_YUBASSSERVICE_FILECODE               (0xB03B)
+#define PROC_FCH_HWM_HWMRESET_FILECODE                                   (0xB040)
+#define PROC_FCH_HWM_HWMENV_FILECODE                                     (0xB041)
+#define PROC_FCH_HWM_HWMMID_FILECODE                                     (0xB042)
+#define PROC_FCH_HWM_HWMLATE_FILECODE                                    (0xB043)
+#define PROC_FCH_HWM_FAMILY_HUDSON2_HUDSON2HWMENVSERVICE_FILECODE        (0xB044)
+#define PROC_FCH_HWM_FAMILY_HUDSON2_HUDSON2HWMMIDSERVICE_FILECODE        (0xB045)
+#define PROC_FCH_HWM_FAMILY_HUDSON2_HUDSON2HWMLATESERVICE_FILECODE       (0xB046)
+#define PROC_FCH_HWM_FAMILY_YUBA_YUBAHWMENVSERVICE_FILECODE              (0xB047)
+#define PROC_FCH_HWM_FAMILY_YUBA_YUBAHWMMIDSERVICE_FILECODE              (0xB048)
+#define PROC_FCH_HWM_FAMILY_YUBA_YUBAHWMLATESERVICE_FILECODE             (0xB049)
+#define PROC_FCH_IDE_IDEENV_FILECODE                                     (0xB050)
+#define PROC_FCH_IDE_IDEMID_FILECODE                                     (0xB051)
+#define PROC_FCH_IDE_IDELATE_FILECODE                                    (0xB052)
+#define PROC_FCH_IMC_IMCENV_FILECODE                                     (0xB060)
+#define PROC_FCH_IMC_IMCMID_FILECODE                                     (0xB061)
+#define PROC_FCH_IMC_IMCLATE_FILECODE                                    (0xB062)
+#define PROC_FCH_IMC_IMCLIB_FILECODE                                     (0xB063)
+#define PROC_FCH_IMC_IMCRESET_FILECODE                                   (0xB064)
+#define PROC_FCH_IMC_FCHECENV_FILECODE                                   (0xB065)
+#define PROC_FCH_IMC_FCHECMID_FILECODE                                   (0xB066)
+#define PROC_FCH_IMC_FCHECLATE_FILECODE                                  (0xB067)
+#define PROC_FCH_IMC_FCHECRESET_FILECODE                                 (0xB068)
+#define PROC_FCH_IMC_FAMILY_HUDSON2_HUDSON2IMCSERVICE_FILECODE           (0xB069)
+#define PROC_FCH_IMC_FAMILY_YUBA_YUBAIMCSERVICE_FILECODE                 (0xB06A)
+#define PROC_FCH_INTERFACE_INITRESETDEF_FILECODE                         (0xB070)
+#define PROC_FCH_INTERFACE_INITENVDEF_FILECODE                           (0xB071)
+#define PROC_FCH_INTERFACE_FCHINITRESET_FILECODE                         (0xB072)
+#define PROC_FCH_INTERFACE_FCHINITENV_FILECODE                           (0xB073)
+#define PROC_FCH_INTERFACE_FCHINITLATE_FILECODE                          (0xB074)
+#define PROC_FCH_INTERFACE_FCHINITMID_FILECODE                           (0xB075)
+#define PROC_FCH_INTERFACE_FCHINITS3_FILECODE                            (0xB076)
+#define PROC_FCH_INTERFACE_FCHTASKLAUNCHER_FILECODE                      (0xB077)
+#define PROC_FCH_IR_IRENV_FILECODE                                       (0xB080)
+#define PROC_FCH_IR_IRMID_FILECODE                                       (0xB081)
+#define PROC_FCH_IR_IRLATE_FILECODE                                      (0xB082)
+#define PROC_FCH_PCIB_PCIBRESET_FILECODE                                 (0xB090)
+#define PROC_FCH_PCIB_PCIBENV_FILECODE                                   (0xB091)
+#define PROC_FCH_PCIB_PCIBMID_FILECODE                                   (0xB092)
+#define PROC_FCH_PCIB_PCIBLATE_FILECODE                                  (0xB093)
+#define PROC_FCH_PCIE_ABRESET_FILECODE                                   (0xB0A0)
+#define PROC_FCH_PCIE_ABENV_FILECODE                                     (0xB0A1)
+#define PROC_FCH_PCIE_ABMID_FILECODE                                     (0xB0A2)
+#define PROC_FCH_PCIE_ABLATE_FILECODE                                    (0xB0A3)
+#define PROC_FCH_PCIE_GPPHP_FILECODE                                     (0xB0A4)
+#define PROC_FCH_PCIE_GPPLIB_FILECODE                                    (0xB0A5)
+#define PROC_FCH_PCIE_GPPRESET_FILECODE                                  (0xB0A6)
+#define PROC_FCH_PCIE_GPPENV_FILECODE                                    (0xB0A7)
+#define PROC_FCH_PCIE_GPPMID_FILECODE                                    (0xB0A8)
+#define PROC_FCH_PCIE_GPPLATE_FILECODE                                   (0xB0A9)
+#define PROC_FCH_PCIE_PCIERESET_FILECODE                                 (0xB0AA)
+#define PROC_FCH_PCIE_PCIEENV_FILECODE                                   (0xB0AB)
+#define PROC_FCH_PCIE_PCIEMID_FILECODE                                   (0xB0AC)
+#define PROC_FCH_PCIE_PCIELATE_FILECODE                                  (0xB0AD)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2ABRESETSERVICE_FILECODE      (0xB0AE)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2ABENVSERVICE_FILECODE        (0xB0AF)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2ABSERVICE_FILECODE           (0xB0B0)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2GPPRESETSERVICE_FILECODE     (0xB0B1)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2GPPSERVICE_FILECODE          (0xB0B2)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2PCIEENVSERVICE_FILECODE      (0xB0B3)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2PCIESERVICE_FILECODE         (0xB0B4)
+#define PROC_FCH_PCIE_FAMILY_YUBA_YUBAABRESETSERVICE_FILECODE            (0xB0B5)
+#define PROC_FCH_PCIE_FAMILY_YUBA_YUBAABENVSERVICE_FILECODE              (0xB0B6)
+#define PROC_FCH_PCIE_FAMILY_YUBA_YUBAABSERVICE_FILECODE                 (0xB0B7)
+#define PROC_FCH_SATA_AHCIENV_FILECODE                                   (0xB0C0)
+#define PROC_FCH_SATA_AHCIMID_FILECODE                                   (0xB0C1)
+#define PROC_FCH_SATA_AHCILATE_FILECODE                                  (0xB0C2)
+#define PROC_FCH_SATA_AHCILIB_FILECODE                                   (0xB0C3)
+#define PROC_FCH_SATA_IDE2AHCIENV_FILECODE                               (0xB0C4)
+#define PROC_FCH_SATA_IDE2AHCIMID_FILECODE                               (0xB0C5)
+#define PROC_FCH_SATA_IDE2AHCILATE_FILECODE                              (0xB0C6)
+#define PROC_FCH_SATA_IDE2AHCILIB_FILECODE                               (0xB0C7)
+#define PROC_FCH_SATA_RAIDENV_FILECODE                                   (0xB0C8)
+#define PROC_FCH_SATA_RAIDMID_FILECODE                                   (0xB0C9)
+#define PROC_FCH_SATA_RAIDLATE_FILECODE                                  (0xB0CA)
+#define PROC_FCH_SATA_RAIDLIB_FILECODE                                   (0xB0CB)
+#define PROC_FCH_SATA_SATAENV_FILECODE                                   (0xB0CC)
+#define PROC_FCH_SATA_SATAENVLIB_FILECODE                                (0xB0CD)
+#define PROC_FCH_SATA_SATAIDEENV_FILECODE                                (0xB0CE)
+#define PROC_FCH_SATA_SATAIDEMID_FILECODE                                (0xB0CF)
+#define PROC_FCH_SATA_SATAIDELATE_FILECODE                               (0xB0D0)
+#define PROC_FCH_SATA_SATAIDELIB_FILECODE                                (0xB0D1)
+#define PROC_FCH_SATA_SATAMID_FILECODE                                   (0xB0D2)
+#define PROC_FCH_SATA_SATALATE_FILECODE                                  (0xB0D3)
+#define PROC_FCH_SATA_SATALIB_FILECODE                                   (0xB0D4)
+#define PROC_FCH_SATA_SATARESET_FILECODE                                 (0xB0D5)
+#define PROC_FCH_SATA_FAMILY_HUDSON2_HUDSON2SATARESETSERVICE_FILECODE    (0xB0D6)
+#define PROC_FCH_SATA_FAMILY_HUDSON2_HUDSON2SATAENVSERVICE_FILECODE      (0xB0D7)
+#define PROC_FCH_SATA_FAMILY_HUDSON2_HUDSON2SATASERVICE_FILECODE         (0xB0D8)
+#define PROC_FCH_SATA_FAMILY_YUBA_YUBASATARESETSERVICE_FILECODE          (0xB0D9)
+#define PROC_FCH_SATA_FAMILY_YUBA_YUBASATAENVSERVICE_FILECODE            (0xB0DA)
+#define PROC_FCH_SATA_FAMILY_YUBA_YUBASATASERVICE_FILECODE               (0xB0DB)
+#define PROC_FCH_SD_SDENV_FILECODE                                       (0xB0E0)
+#define PROC_FCH_SD_SDMID_FILECODE                                       (0xB0E1)
+#define PROC_FCH_SD_SDLATE_FILECODE                                      (0xB0E2)
+#define PROC_FCH_SD_FAMILY_HUDSON2_HUDSON2SDSERVICE_FILECODE             (0xB0E3)
+#define PROC_FCH_SD_FAMILY_HUDSON2_HUDSON2SDRESETSERVICE_FILECODE        (0xB0E4)
+#define PROC_FCH_SD_FAMILY_HUDSON2_HUDSON2SDENVSERVICE_FILECODE          (0xB0E5)
+#define PROC_FCH_SD_FAMILY_YUBA_YUBASDSERVICE_FILECODE                   (0xB0E6)
+#define PROC_FCH_SD_FAMILY_YUBA_YUBASDRESETSERVICE_FILECODE              (0xB0E7)
+#define PROC_FCH_SD_FAMILY_YUBA_YUBASDENVSERVICE_FILECODE                (0xB0E8)
+#define PROC_FCH_SPI_LPCRESET_FILECODE                                   (0xB0F0)
+#define PROC_FCH_SPI_LPCENV_FILECODE                                     (0xB0F1)
+#define PROC_FCH_SPI_LPCMID_FILECODE                                     (0xB0F2)
+#define PROC_FCH_SPI_LPCLATE_FILECODE                                    (0xB0F3)
+#define PROC_FCH_SPI_SPIRESET_FILECODE                                   (0xB0F4)
+#define PROC_FCH_SPI_SPIENV_FILECODE                                     (0xB0F5)
+#define PROC_FCH_SPI_SPIMID_FILECODE                                     (0xB0F6)
+#define PROC_FCH_SPI_SPILATE_FILECODE                                    (0xB0F7)
+#define PROC_FCH_USB_EHCIRESET_FILECODE                                  (0xB100)
+#define PROC_FCH_USB_EHCIENV_FILECODE                                    (0xB101)
+#define PROC_FCH_USB_EHCIMID_FILECODE                                    (0xB102)
+#define PROC_FCH_USB_EHCILATE_FILECODE                                   (0xB103)
+#define PROC_FCH_USB_OHCIRESET_FILECODE                                  (0xB104)
+#define PROC_FCH_USB_OHCIENV_FILECODE                                    (0xB105)
+#define PROC_FCH_USB_OHCIMID_FILECODE                                    (0xB106)
+#define PROC_FCH_USB_OHCILATE_FILECODE                                   (0xB107)
+#define PROC_FCH_USB_USBRESET_FILECODE                                   (0xB108)
+#define PROC_FCH_USB_USBENV_FILECODE                                     (0xB109)
+#define PROC_FCH_USB_USBMID_FILECODE                                     (0xB10A)
+#define PROC_FCH_USB_USBLATE_FILECODE                                    (0xB10B)
+#define PROC_FCH_USB_XHCIRESET_FILECODE                                  (0xB10C)
+#define PROC_FCH_USB_XHCIENV_FILECODE                                    (0xB10D)
+#define PROC_FCH_USB_XHCIMID_FILECODE                                    (0xB10E)
+#define PROC_FCH_USB_XHCILATE_FILECODE                                   (0xB10F)
+#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2EHCIENVSERVICE_FILECODE       (0xB110)
+#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2EHCIMIDSERVICE_FILECODE       (0xB111)
+#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2EHCILATESERVICE_FILECODE      (0xB112)
+#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2OHCIENVSERVICE_FILECODE       (0xB113)
+#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2OHCIMIDSERVICE_FILECODE       (0xB114)
+#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2OHCILATESERVICE_FILECODE      (0xB115)
+#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCIRESETSERVICE_FILECODE     (0xB116)
+#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCIENVSERVICE_FILECODE       (0xB117)
+#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCIMIDSERVICE_FILECODE       (0xB118)
+#define PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCILATESERVICE_FILECODE      (0xB119)
+#define PROC_FCH_USB_FAMILY_YUBA_YUBAEHCIENVSERVICE_FILECODE          (0xB11A)
+#define PROC_FCH_USB_FAMILY_YUBA_YUBAEHCIMIDSERVICE_FILECODE          (0xB11B)
+#define PROC_FCH_USB_FAMILY_YUBA_YUBAEHCILATESERVICE_FILECODE         (0xB11C)
+#define PROC_FCH_USB_FAMILY_YUBA_YUBAOHCIENVSERVICE_FILECODE          (0xB11D)
+#define PROC_FCH_USB_FAMILY_YUBA_YUBAOHCIMIDSERVICE_FILECODE          (0xB11E)
+#define PROC_FCH_USB_FAMILY_YUBA_YUBAOHCILATESERVICE_FILECODE         (0xB11F)
+#define PROC_FCH_USB_FAMILY_YUBA_YUBAXHCIRESETSERVICE_FILECODE        (0xB120)
+#define PROC_FCH_USB_FAMILY_YUBA_YUBAXHCIENVSERVICE_FILECODE          (0xB121)
+#define PROC_FCH_USB_FAMILY_YUBA_YUBAXHCIMIDSERVICE_FILECODE          (0xB122)
+#define PROC_FCH_USB_FAMILY_YUBA_YUBAXHCILATESERVICE_FILECODE         (0xB123)
+#define PROC_FCH_USB_XHCIRECOVERY_FILECODE                            (0xB124)
+#define PROC_FCH_PCIE_GPPPORTINIT_FILECODE                            (0xB125)
+
+#define UEFI_DXE_FCHDXE_FCHDXE_FILECODE                              (0xB200)
+#define UEFI_DXE_CF9RESET_CF9RESET_FILECODE                              (0xB220)
+#define UEFI_DXE_CF9RESET_IA32_IA32CF9RESET_FILECODE                     (0xB221)
+#define UEFI_DXE_CF9RESET_X64_X64CF9RESET_FILECODE                       (0xB222)
+#define UEFI_DXE_LEGACYINTERRUPT_LEGACYINTERRUPT_FILECODE                (0xB230)
+#define UEFI_DXE_SMMCONTROL_SMMCONTROL_FILECODE                          (0xB240)
+#define UEFI_SMM_FCHSMMLIB_FCHDXECOMMON_FILECODE              (0xB250)
+#define UEFI_SMM_FCHSMMLIB_FCHSMMLIB_FILECODE                 (0xB251)
+#define UEFI_DXE_FCHDXELIB_FCHDXELIB_FILECODE                        (0xB252)
+#define UEFI_PEI_FCHPEI_FCHPEI_FILECODE                              (0xB260)
+#define UEFI_PEI_FCHPEI_FCHRESET_FILECODE                               (0xB261)
+#define UEFI_PEI_FCHPEI_FCHSTALL_FILECODE                               (0xB262)
+#define UEFI_PEI_FCHPEI_LIBAMDPEI_FILECODE                              (0xB263)
+#define UEFI_PEI_SMBUS_SMBUS_FILECODE                                   (0xB270)
+#define UEFI_SMM_FCHSMM_FCHSMM_FILECODE                              (0xB280)
+#define UEFI_SMM_FCHSMM_GPESMI_FILECODE                                (0xB282)
+#define UEFI_SMM_FCHSMM_IOTRAPSMI_FILECODE                             (0xB283)
+#define UEFI_SMM_FCHSMM_MISCSMI_FILECODE                               (0xB284)
+#define UEFI_SMM_FCHSMM_PERIODICTIMERSMI_FILECODE                      (0xB285)
+#define UEFI_SMM_FCHSMM_POWERBUTTONSMI_FILECODE                        (0xB286)
+#define UEFI_SMM_FCHSMM_SWSMI_FILECODE                                 (0xB287)
+#define UEFI_SMM_FCHSMM_SXSMI_FILECODE                                 (0xB288)
+#define UEFI_DXE_SMBUS_SMBUSLIGHT_FILECODE                               (0xB2A0)
+#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMDISPATCHER_FILECODE                     (0xB290)
+#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMGPEDISPATCHER_FCHSMMGPEDISPATCHER_FILECODE        (0xB292)
+#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMIOTRAPDISPATCHER_FCHSMMIOTRAPDISPATCHER_FILECODE  (0xB293)
+#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMMISCDISPATCHER_FCHSMMMISCDISPATCHER_FILECODE      (0xB294)
+#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMPERIODICALDISPATCHER_FCHSMMPERIODICALDISPATCHER_FILECODE (0xB295)
+#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMPWRBTNDISPATCHER_FCHSMMPWRBTNDISPATCHER_FILECODE  (0xB296)
+#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMSWDISPATCHER_FCHSMMSWDISPATCHER_FILECODE          (0xB297)
+#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMSXDISPATCHER_FCHSMMSXDISPATCHER_FILECODE          (0xB298)
+#define UEFI_SMM_FCHSMMDISPATCHER_FCHSMMUSBDISPATCHER_FCHSMMUSBDISPATCHER_FILECODE        (0xB299)
+
+#define LIB_AMDLIB_FILECODE                                              (0xC001)
+
+#define LEGACY_PROC_AGESACALLOUTS_FILECODE                               (0xC010)
+#define LEGACY_PROC_HOBTRANSFER_FILECODE                                 (0xC011)
+#define LEGACY_PROC_DISPATCHER_FILECODE                                  (0xC012)
+
+#define UEFI_DXE_AMDAGESADXEDRIVER_AMDAGESADXEDRIVER_FILECODE            (0xC120)
+
+#define UEFI_PEI_AMDINITPOSTPEIM_AMDINITPOSTPEIM_FILECODE                (0xC140)
+#define UEFI_PEI_AMDPROCESSORINITPEIM_AMDPROCESSORINITPEIM_FILECODE      (0xC141)
+#define UEFI_PEI_AMDRESETMANAGER_AMDRESETMANAGER_FILECODE                (0xC142)
+#define UEFI_PROC_HOBTRANSFERUEFI_FILECODE                               (0xC162)
+
+#define PROC_COMMON_AMDINITEARLY_FILECODE                                (0xC020)
+#define PROC_COMMON_AMDINITENV_FILECODE                                  (0xC021)
+#define PROC_COMMON_AMDINITLATE_FILECODE                                 (0xC022)
+#define PROC_COMMON_AMDINITMID_FILECODE                                  (0xC023)
+#define PROC_COMMON_AMDINITPOST_FILECODE                                 (0xC024)
+#define PROC_COMMON_AMDINITRECOVERY_FILECODE                             (0xC025)
+#define PROC_COMMON_AMDINITRESET_FILECODE                                (0xC026)
+#define PROC_COMMON_AMDINITRESUME_FILECODE                               (0xC027)
+#define PROC_COMMON_AMDS3LATERESTORE_FILECODE                            (0xC028)
+#define PROC_COMMON_AMDS3SAVE_FILECODE                                   (0xC029)
+#define PROC_COMMON_AMDLATERUNAPTASK_FILECODE                            (0xC02A)
+
+#define PROC_COMMON_COMMONRETURNS_FILECODE                               (0xC0C0)
+#define PROC_COMMON_CREATESTRUCT_FILECODE                                (0xC0D0)
+#define PROC_COMMON_COMMONINITS_FILECODE                                 (0xC0F0)
+#define PROC_COMMON_S3RESTORESTATE_FILECODE                              (0xC0F8)
+#define PROC_COMMON_S3SAVESTATE_FILECODE                                 (0xC0F9)
+
+#define PROC_CPU_CPUAPICUTILITIES_FILECODE                               (0xC401)
+#define PROC_CPU_CPUBRANDID_FILECODE                                     (0xC402)
+#define PROC_CPU_TABLE_FILECODE                                          (0xC403)
+#define PROC_CPU_CPUEARLYINIT_FILECODE                                   (0xC405)
+#define PROC_CPU_CPUEVENTLOG_FILECODE                                    (0xC406)
+#define PROC_CPU_CPUFAMILYTRANSLATION_FILECODE                           (0xC407)
+#define PROC_CPU_CPUGENERALSERVICES_FILECODE                             (0xC408)
+#define PROC_CPU_CPUINITEARLYTABLE_FILECODE                              (0xC409)
+#define PROC_CPU_CPULATEINIT_FILECODE                                    (0xC40A)
+#define PROC_CPU_CPUMICROCODEPATCH_FILECODE                              (0xC40B)
+#define PROC_CPU_CPUWARMRESET_FILECODE                                   (0xC40C)
+#define PROC_CPU_HEAPMANAGER_FILECODE                                    (0xC40D)
+#define PROC_CPU_CPUBIST_FILECODE                                        (0xC40E)
+
+#define PROC_CPU_CPUPOSTINIT_FILECODE                                    (0xC420)
+#define PROC_CPU_CPUPOWERMGMT_FILECODE                                   (0xC430)
+#define PROC_CPU_CPUPOWERMGMTMULTISOCKET_FILECODE                        (0xC431)
+#define PROC_CPU_CPUPOWERMGMTSINGLESOCKET_FILECODE                       (0xC432)
+#define PROC_CPU_S3_FILECODE                                             (0xC460)
+
+// Family 10h
+#define PROC_CPU_FAMILY_0X10_CPUCOMMONF10UTILITIES_FILECODE              (0xC801)
+#define PROC_CPU_FAMILY_0X10_CPUF10BRANDID_FILECODE                      (0xC802)
+#define PROC_CPU_FAMILY_0X10_CPUF10CACHEDEFAULTS_FILECODE                (0xC803)
+#define PROC_CPU_FAMILY_0X10_CPUF10CACHEFLUSHONHALT_FILECODE             (0xC804)
+#define PROC_CPU_FAMILY_0X10_CPUF10DMI_FILECODE                          (0xC805)
+#define PROC_CPU_FAMILY_0X10_CPUF10EARLYINIT_FILECODE                    (0xC806)
+#define PROC_CPU_FAMILY_0X10_CPUF10FEATURELEVELING_FILECODE              (0xC807)
+#define PROC_CPU_FAMILY_0X10_CPUF10HTPHYTABLES_FILECODE                  (0xC808)
+#define PROC_CPU_FAMILY_0X10_CPUF10MSRTABLES_FILECODE                    (0xC809)
+#define PROC_CPU_FAMILY_0X10_CPUF10PCITABLES_FILECODE                    (0xC80A)
+#define PROC_CPU_FAMILY_0X10_CPUF10POWERCHECK_FILECODE                   (0xC80B)
+#define PROC_CPU_FAMILY_0X10_CPUF10POWERMGMTSYSTEMTABLES_FILECODE        (0xC80C)
+#define PROC_CPU_FAMILY_0X10_CPUF10POWERPLANE_FILECODE                   (0xC80D)
+#define PROC_CPU_FAMILY_0X10_CPUF10SOFTWARETHERMAL_FILECODE              (0xC80E)
+#define PROC_CPU_FAMILY_0X10_CPUF10UTILITIES_FILECODE                    (0xC80F)
+#define PROC_CPU_FAMILY_0X10_CPUF10WHEAINITDATATABLES_FILECODE           (0xC810)
+#define PROC_CPU_FAMILY_0X10_CPUF10PSTATE_FILECODE                       (0xC811)
+#define PROC_CPU_FAMILY_0X10_CPUF10CPB_FILECODE                          (0xC812)
+#define PROC_CPU_FAMILY_0X10_CPUF10WORKAROUNDSTABLE_FILECODE             (0xC813)
+#define PROC_CPU_FAMILY_0X10_F10PMNBCOFVIDINIT_FILECODE                  (0xC820)
+#define PROC_CPU_FAMILY_0X10_F10SINGLELINKPCITABLES_FILECODE             (0xC821)
+#define PROC_CPU_FAMILY_0X10_F10MULTILINKPCITABLES_FILECODE              (0xC822)
+#define PROC_CPU_FAMILY_0X10_F10PMNBPSTATEINIT_FILECODE                  (0xC823)
+#define PROC_CPU_FAMILY_0X10_F10PMASYMBOOSTINIT_FILECODE                 (0xC824)
+#define PROC_CPU_FAMILY_0X10_F10INITEARLYTABLE_FILECODE                  (0xC825)
+#define PROC_CPU_FAMILY_0X10_F10PMDUALPLANEONLYSUPPORT_FILECODE          (0xC826)
+#define PROC_CPU_FAMILY_0X10_F10IOCSTATE_FILECODE                        (0xC827)
+#define PROC_CPU_FAMILY_0X10_REVC_F10REVCUTILITIES_FILECODE              (0xC830)
+#define PROC_CPU_FAMILY_0X10_REVC_F10REVCHWC1E_FILECODE                  (0xC831)
+#define PROC_CPU_FAMILY_0X10_REVC_F10REVCSWC1E_FILECODE                  (0xC832)
+#define PROC_CPU_FAMILY_0X10_REVC_F10REVCPCITABLES_FILECODE              (0xC833)
+#define PROC_CPU_FAMILY_0X10_REVC_F10REVCMSRTABLES_FILECODE              (0xC834)
+#define PROC_CPU_FAMILY_0X10_REVC_F10REVCHTPHYTABLES_FILECODE            (0xC835)
+#define PROC_CPU_FAMILY_0X10_REVC_BL_F10BLHTPHYTABLES_FILECODE           (0xC836)
+#define PROC_CPU_FAMILY_0X10_REVC_BL_F10BLLOGICALIDTABLES_FILECODE       (0xC837)
+#define PROC_CPU_FAMILY_0X10_REVC_BL_F10BLMICROCODEPATCHTABLES_FILECODE  (0xC838)
+#define PROC_CPU_FAMILY_0X10_REVC_BL_F10BLMSRTABLES_FILECODE             (0xC839)
+#define PROC_CPU_FAMILY_0X10_REVC_BL_F10BLEQUIVALENCETABLE_FILECODE      (0xC83A)
+#define PROC_CPU_FAMILY_0X10_REVC_BL_F10BLPCITABLES_FILECODE             (0xC83B)
+#define PROC_CPU_FAMILY_0X10_REVC_BL_F10BLCACHEFLUSHONHALT_FILECODE      (0xC83C)
+#define PROC_CPU_FAMILY_0X10_REVC_DA_F10DAHTPHYTABLES_FILECODE           (0xC83D)
+#define PROC_CPU_FAMILY_0X10_REVC_DA_F10DALOGICALIDTABLES_FILECODE       (0xC83E)
+#define PROC_CPU_FAMILY_0X10_REVC_DA_F10DAMICROCODEPATCHTABLES_FILECODE  (0xC83F)
+#define PROC_CPU_FAMILY_0X10_REVC_DA_F10DAMSRTABLES_FILECODE             (0xC840)
+#define PROC_CPU_FAMILY_0X10_REVC_DA_F10DAEQUIVALENCETABLE_FILECODE      (0xC841)
+#define PROC_CPU_FAMILY_0X10_REVC_DA_F10DAPCITABLES_FILECODE             (0xC842)
+#define PROC_CPU_FAMILY_0X10_REVC_DA_F10DACACHEFLUSHONHALT_FILECODE      (0xC843)
+#define PROC_CPU_FAMILY_0X10_REVC_RB_F10RBHTPHYTABLES_FILECODE           (0xC844)
+#define PROC_CPU_FAMILY_0X10_REVC_RB_F10RBLOGICALIDTABLES_FILECODE       (0xC845)
+#define PROC_CPU_FAMILY_0X10_REVC_RB_F10RBMICROCODEPATCHTABLES_FILECODE  (0xC846)
+#define PROC_CPU_FAMILY_0X10_REVC_RB_F10RBMSRTABLES_FILECODE             (0xC847)
+#define PROC_CPU_FAMILY_0X10_REVC_RB_F10RBEQUIVALENCETABLE_FILECODE      (0xC848)
+#define PROC_CPU_FAMILY_0X10_REVC_RB_F10RBPCITABLES_FILECODE             (0xC849)
+#define PROC_CPU_FAMILY_0X10_REVD_F10REVDUTILITIES_FILECODE              (0xC850)
+#define PROC_CPU_FAMILY_0X10_REVD_F10REVDMSGBASEDC1E_FILECODE            (0xC851)
+#define PROC_CPU_FAMILY_0X10_REVD_F10REVDL3FEATURES_FILECODE             (0xC852)
+#define PROC_CPU_FAMILY_0X10_REVD_HY_F10HYHTPHYTABLES_FILECODE           (0xC853)
+#define PROC_CPU_FAMILY_0X10_REVD_HY_F10HYINITEARLYTABLE_FILECODE        (0xC854)
+#define PROC_CPU_FAMILY_0X10_REVD_HY_F10HYLOGICALIDTABLES_FILECODE       (0xC855)
+#define PROC_CPU_FAMILY_0X10_REVD_HY_F10HYMICROCODEPATCHTABLES_FILECODE  (0xC856)
+#define PROC_CPU_FAMILY_0X10_REVD_HY_F10HYMSRTABLES_FILECODE             (0xC857)
+#define PROC_CPU_FAMILY_0X10_REVD_HY_F10HYEQUIVALENCETABLE_FILECODE      (0xC858)
+#define PROC_CPU_FAMILY_0X10_REVD_HY_F10HYPCITABLES_FILECODE             (0xC859)
+#define PROC_CPU_FAMILY_0X10_REVE_F10REVEUTILITIES_FILECODE              (0xC860)
+#define PROC_CPU_FAMILY_0X10_REVE_F10REVEMSRTABLES_FILECODE              (0xC861)
+#define PROC_CPU_FAMILY_0X10_REVE_F10REVEPCITABLES_FILECODE              (0xC862)
+#define PROC_CPU_FAMILY_0X10_REVE_F10REVEHTPHYTABLES_FILECODE            (0xC863)
+#define PROC_CPU_FAMILY_0X10_REVE_PH_F10PHEQUIVALENCETABLE_FILECODE      (0xC864)
+#define PROC_CPU_FAMILY_0X10_REVE_PH_F10PHHTPHYTABLES_FILECODE           (0xC865)
+#define PROC_CPU_FAMILY_0X10_REVE_PH_F10PHLOGICALIDTABLES_FILECODE       (0xC866)
+#define PROC_CPU_FAMILY_0X10_REVE_PH_F10PHMICROCODEPATCHTABLES_FILECODE  (0xC867)
+
+// Family 12h
+#define PROC_CPU_FAMILY_0X12_CPUCOMMONF12UTILITIES_FILECODE              (0xC901)
+#define PROC_CPU_FAMILY_0X12_CPUF12BRANDID_FILECODE                      (0xC902)
+#define PROC_CPU_FAMILY_0X12_CPUF12CACHEDEFAULTS_FILECODE                (0xC903)
+#define PROC_CPU_FAMILY_0X12_CPUF12DMI_FILECODE                          (0xC904)
+#define PROC_CPU_FAMILY_0X12_CPUF12MSRTABLES_FILECODE                    (0xC905)
+#define PROC_CPU_FAMILY_0X12_CPUF12EARLYNBPSTATEINIT_FILECODE            (0xC906)
+#define PROC_CPU_FAMILY_0X12_CPUF12PCITABLES_FILECODE                    (0xC907)
+#define PROC_CPU_FAMILY_0X12_CPUF12POWERCHECK_FILECODE                   (0xC908)
+#define PROC_CPU_FAMILY_0X12_CPUF12POWERMGMTSYSTEMTABLES_FILECODE        (0xC909)
+#define PROC_CPU_FAMILY_0X12_CPUF12POWERPLANE_FILECODE                   (0xC90A)
+#define PROC_CPU_FAMILY_0X12_CPUF12SOFTWARETHERMAL_FILECODE              (0xC90B)
+#define PROC_CPU_FAMILY_0X12_CPUF12UTILITIES_FILECODE                    (0xC90C)
+#define PROC_CPU_FAMILY_0X12_CPUF12WHEAINITDATATABLES_FILECODE           (0xC90D)
+#define PROC_CPU_FAMILY_0X12_CPUF12PSTATE_FILECODE                       (0xC90E)
+#define PROC_CPU_FAMILY_0X12_F12C6STATE_FILECODE                         (0xC90F)
+#define PROC_CPU_FAMILY_0X12_F12CPB_FILECODE                             (0xC910)
+#define PROC_CPU_FAMILY_0X12_F12IOCSTATE_FILECODE                        (0xC911)
+#define PROC_CPU_FAMILY_0X12_LN_F12LNLOGICALIDTABLES_FILECODE            (0xC921)
+#define PROC_CPU_FAMILY_0X12_LN_F12LNMICROCODEPATCHTABLES_FILECODE       (0xC922)
+#define PROC_CPU_FAMILY_0X12_LN_F12LNEQUIVALENCETABLE_FILECODE           (0xC923)
+#define PROC_CPU_FAMILY_0X12_CPUF12PERCOREPCITABLES_FILECODE             (0xC924)
+#define PROC_CPU_FAMILY_0X12_LN_F12LNEARLYSAMPLES_FILECODE               (0xC925)
+
+// Family 14h
+#define PROC_CPU_FAMILY_0X14_CPUCOMMONF14UTILITIES_FILECODE              (0xCA01)
+#define PROC_CPU_FAMILY_0X14_CPUF14BRANDID_FILECODE                      (0xCA02)
+#define PROC_CPU_FAMILY_0X14_CPUF14CACHEDEFAULTS_FILECODE                (0xCA03)
+#define PROC_CPU_FAMILY_0X14_CPUF14DMI_FILECODE                          (0xCA04)
+#define PROC_CPU_FAMILY_0X14_CPUF14MSRTABLES_FILECODE                    (0xCA05)
+#define PROC_CPU_FAMILY_0X14_CPUF14PCITABLES_FILECODE                    (0xCA06)
+#define PROC_CPU_FAMILY_0X14_CPUF14UTILITIES_FILECODE                    (0xCA07)
+#define PROC_CPU_FAMILY_0X14_CPUF14WHEAINITDATATABLES_FILECODE           (0xCA08)
+#define PROC_CPU_FAMILY_0X14_CPUF14PSTATE_FILECODE                       (0xCA09)
+#define PROC_CPU_FAMILY_0X14_F14IOCSTATE_FILECODE                        (0xCA0A)
+#define PROC_CPU_FAMILY_0X14_CPUF14PERCOREPCITABLES_FILECODE             (0xCA0B)
+
+#define PROC_CPU_FAMILY_0X14_ON_F14ONPOWERPLANE_FILECODE                 (0xCA21)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONC6STATE_FILECODE                    (0xCA22)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONLOGICALIDTABLES_FILECODE            (0xCA23)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONMICROCODEPATCHTABLES_FILECODE       (0xCA24)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONEQUIVALENCETABLE_FILECODE           (0xCA25)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONINITEARLYTABLE_FILECODE             (0xCA26)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONEARLYSAMPLES_FILECODE               (0xCA27)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONMSRTABLES_FILECODE                  (0xCA28)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONUTILITIES_FILECODE                  (0xCA29)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONPOWERMGMTSYSTEMTABLES_FILECODE      (0xCA2A)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONLOWPOWERINIT_FILECODE               (0xCA2B)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONCPB_FILECODE                        (0xCA2C)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONSOFTWARETHERMAL_FILECODE            (0xCA2D)
+#define PROC_CPU_FAMILY_0X14_ON_F14ONPOWERCHECK_FILECODE                 (0xCA2E)
+
+#define PROC_CPU_FAMILY_0X14_KR_F14KREQUIVALENCETABLE_FILECODE           (0xCA41)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRINITEARLYTABLE_FILECODE             (0xCA42)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRLOGICALIDTABLES_FILECODE            (0xCA43)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRMICROCODEPATCHTABLES_FILECODE       (0xCA44)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRCPB_FILECODE                        (0xCA45)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRC6STATE_FILECODE                    (0xCA46)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRUTILITIES_FILECODE                  (0xCA47)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRPOWERPLANE_FILECODE                 (0xCA48)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRPOWERMGMTSYSTEMTABLES_FILECODE      (0xCA49)
+#define PROC_CPU_FAMILY_0X14_KR_F14KREARLYNBPSTATEINIT_FILECODE          (0xCA4A)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRMSRTABLES_FILECODE                  (0xCA4B)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRPCITABLES_FILECODE                  (0xCA4C)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRSOFTWARETHERMAL_FILECODE            (0xCA4D)
+#define PROC_CPU_FAMILY_0X14_KR_F14KRPOWERCHECK_FILECODE                 (0xCA4E)
+
+// Family 15h
+#define PROC_CPU_FAMILY_0X15_CPUCOMMONF15UTILITIES_FILECODE              (0xCB01)
+#define PROC_CPU_FAMILY_0X15_CPUF15BRANDID_FILECODE                      (0xCB02)
+#define PROC_CPU_FAMILY_0X15_CPUF15CACHEDEFAULTS_FILECODE                (0xCB03)
+#define PROC_CPU_FAMILY_0X15_CPUF15DMI_FILECODE                          (0xCB04)
+#define PROC_CPU_FAMILY_0X15_CPUF15MSRTABLES_FILECODE                    (0xCB05)
+#define PROC_CPU_FAMILY_0X15_CPUF15PCITABLES_FILECODE                    (0xCB06)
+#define PROC_CPU_FAMILY_0X15_CPUF15POWERCHECK_FILECODE                   (0xCB07)
+#define PROC_CPU_FAMILY_0X15_CPUF15UTILITIES_FILECODE                    (0xCB08)
+#define PROC_CPU_FAMILY_0X15_CPUF15WHEAINITDATATABLES_FILECODE           (0xCB09)
+#define PROC_CPU_FAMILY_0X15_F15PSTATEHPCMODE_FILECODE                   (0xCB0A)
+#define PROC_CPU_FAMILY_0X15_CPUF15APM_FILECODE                          (0xCB0B)
+
+#define PROC_CPU_FAMILY_0X15_OR_CPUF15ORCOREAFTERRESET_FILECODE          (0xCB20)
+#define PROC_CPU_FAMILY_0X15_OR_CPUF15ORDMI_FILECODE                     (0xCB21)
+#define PROC_CPU_FAMILY_0X15_OR_CPUF15ORNBAFTERRESET_FILECODE            (0xCB22)
+#define PROC_CPU_FAMILY_0X15_OR_CPUF15ORPSTATE_FILECODE                  (0xCB23)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORL3FEATURES_FILECODE                 (0xCB24)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORMSGBASEDC1E_FILECODE                (0xCB25)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORLOGICALIDTABLES_FILECODE            (0xCB26)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORMICROCODEPATCHTABLES_FILECODE       (0xCB27)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORMSRTABLES_FILECODE                  (0xCB28)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORSHAREDMSRTABLE_FILECODE             (0xCB29)
+#define PROC_CPU_FAMILY_0X15_OR_F15OREQUIVALENCETABLE_FILECODE           (0xCB2A)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORPCITABLES_FILECODE                  (0xCB2B)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORPOWERMGMTSYSTEMTABLES_FILECODE      (0xCB2C)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORPOWERPLANE_FILECODE                 (0xCB2D)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORUTILITIES_FILECODE                  (0xCB2E)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORWORKAROUNDSTABLE_FILECODE           (0xCB2F)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORPMNBCOFVIDINIT_FILECODE             (0xCB30)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORLOWPWRPSTATE_FILECODE               (0xCB31)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORSINGLELINKPCITABLES_FILECODE        (0xCB32)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORMULTILINKPCITABLES_FILECODE         (0xCB33)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORC6STATE_FILECODE                    (0xCB34)
+#define PROC_CPU_FAMILY_0X15_OR_F15OREARLYSAMPLES_FILECODE               (0xCB35)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORCPB_FILECODE                        (0xCB36)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORIOCSTATE_FILECODE                   (0xCB37)
+#define PROC_CPU_FAMILY_0X15_OR_CPUF15ORCACHEFLUSHONHALT_FILECODE        (0xCB38)
+#define PROC_CPU_FAMILY_0X15_OR_CPUF15ORFEATURELEVELING_FILECODE         (0xCB39)
+#define PROC_CPU_FAMILY_0X15_OR_CPUF15ORSOFTWARETHERMAL_FILECODE         (0xCB3A)
+#define PROC_CPU_FAMILY_0X15_OR_F15ORINITEARLYTABLE_FILECODE             (0xCB3B)
+
+#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNCOREAFTERRESET_FILECODE          (0xCB50)
+#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNDMI_FILECODE                     (0xCB51)
+#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNNBAFTERRESET_FILECODE            (0xCB52)
+#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNPSTATE_FILECODE                  (0xCB53)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNLOGICALIDTABLES_FILECODE            (0xCB54)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNMICROCODEPATCHTABLES_FILECODE       (0xCB55)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNMSRTABLES_FILECODE                  (0xCB56)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNSHAREDMSRTABLE_FILECODE             (0xCB57)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNEQUIVALENCETABLE_FILECODE           (0xCB58)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNPCITABLES_FILECODE                  (0xCB59)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNPOWERMGMTSYSTEMTABLES_FILECODE      (0xCB5A)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNPOWERPLANE_FILECODE                 (0xCB5B)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNUTILITIES_FILECODE                  (0xCB5C)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNC6STATE_FILECODE                    (0xCB5D)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNCPB_FILECODE                        (0xCB5E)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNIOCSTATE_FILECODE                   (0xCB5F)
+#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNCACHEFLUSHONHALT_FILECODE        (0xCB60)
+#define PROC_CPU_FAMILY_0X15_TN_CPUF15TNSOFTWARETHERMAL_FILECODE         (0xCB61)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNINITEARLYTABLE_FILECODE             (0xCB62)
+#define PROC_CPU_FAMILY_0X15_TN_F15TNEARLYSAMPLES_FILECODE               (0xCB63)
+
+#define PROC_CPU_FAMILY_0X15_KM_CPUF15KMCOREAFTERRESET_FILECODE          (0xCB80)
+#define PROC_CPU_FAMILY_0X15_KM_CPUF15KMDMI_FILECODE                     (0xCB81)
+#define PROC_CPU_FAMILY_0X15_KM_CPUF15KMNBAFTERRESET_FILECODE            (0xCB82)
+#define PROC_CPU_FAMILY_0X15_KM_CPUF15KMPSTATE_FILECODE                  (0xCB83)
+#define PROC_CPU_FAMILY_0X15_KM_F15KML3FEATURES_FILECODE                 (0xCB84)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMMSGBASEDC1E_FILECODE                (0xCB85)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMLOGICALIDTABLES_FILECODE            (0xCB86)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMMICROCODEPATCHTABLES_FILECODE       (0xCB87)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMMSRTABLES_FILECODE                  (0xCB88)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMSHAREDMSRTABLE_FILECODE             (0xCB89)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMEQUIVALENCETABLE_FILECODE           (0xCB8A)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMPCITABLES_FILECODE                  (0xCB8B)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMPOWERMGMTSYSTEMTABLES_FILECODE      (0xCB8C)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMPOWERPLANE_FILECODE                 (0xCB8D)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMUTILITIES_FILECODE                  (0xCB8E)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMWORKAROUNDSTABLE_FILECODE           (0xCB8F)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMPMNBCOFVIDINIT_FILECODE             (0xCB90)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMLOWPWRPSTATE_FILECODE               (0xCB91)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMSINGLELINKPCITABLES_FILECODE        (0xCB92)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMMULTILINKPCITABLES_FILECODE         (0xCB93)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMC6STATE_FILECODE                    (0xCB94)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMCPB_FILECODE                        (0xCB95)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMIOCSTATE_FILECODE                   (0xCB96)
+#define PROC_CPU_FAMILY_0X15_KM_CPUF15KMCACHEFLUSHONHALT_FILECODE        (0xCB97)
+#define PROC_CPU_FAMILY_0X15_KM_CPUF15KMFEATURELEVELING_FILECODE         (0xCB98)
+#define PROC_CPU_FAMILY_0X15_KM_CPUF15KMSOFTWARETHERMAL_FILECODE         (0xCB99)
+#define PROC_CPU_FAMILY_0X15_KM_F15KMINITEARLYTABLE_FILECODE             (0xCB9A)
+
+#define PROC_CPU_FEATURE_CPUCACHEFLUSHONHALT_FILECODE                    (0xDC01)
+#define PROC_CPU_FEATURE_CPUCACHEINIT_FILECODE                           (0xDC02)
+#define PROC_CPU_FEATURE_CPUDMI_FILECODE                                 (0xDC10)
+#define PROC_CPU_FEATURE_CPUFEATURELEVELING_FILECODE                     (0xDC20)
+#define PROC_CPU_FEATURE_CPUL3FEATURES_FILECODE                          (0xDC30)
+#define PROC_CPU_FEATURE_CPUPSTATEGATHER_FILECODE                        (0xDC41)
+#define PROC_CPU_FEATURE_CPUPSTATELEVELING_FILECODE                      (0xDC42)
+#define PROC_CPU_FEATURE_CPUPSTATETABLES_FILECODE                        (0xDC43)
+#define PROC_CPU_FEATURE_CPUSLIT_FILECODE                                (0xDC50)
+#define PROC_CPU_FEATURE_CPUSRAT_FILECODE                                (0xDC60)
+#define PROC_CPU_FEATURE_CPUWHEA_FILECODE                                (0xDC70)
+#define PROC_CPU_FEATURE_CPUHWC1E_FILECODE                               (0xDC80)
+#define PROC_CPU_FEATURE_CPUSWC1E_FILECODE                               (0xDC81)
+#define PROC_CPU_FEATURE_CPUC6STATE_FILECODE                             (0xDC82)
+#define PROC_CPU_FEATURE_CPUCPB_FILECODE                                 (0xDC83)
+#define PROC_CPU_FEATURE_CPULOWPWRPSTATE_FILECODE                        (0xDC84)
+#define PROC_CPU_FEATURE_CPUIOCSTATE_FILECODE                            (0xDC85)
+#define PROC_CPU_FEATURE_CPUPSTATEHPCMODE_FILECODE                       (0xDC86)
+#define PROC_CPU_FEATURE_CPUAPM_FILECODE                                 (0xDC87)
+#define PROC_CPU_FEATURE_CPUFEATURES_FILECODE                            (0xDC90)
+#define PROC_CPU_FEATURE_CPUMSGBASEDC1E_FILECODE                         (0xDCA0)
+#define PROC_CPU_FEATURE_CPUCORELEVELING_FILECODE                        (0xDCB0)
+#define PROC_CPU_FEATURE_PRESERVEMAILBOX_FILECODE                        (0xDCC0)
+
+#define PROC_RECOVERY_CPU_CPURECOVERY_FILECODE                           (0xDE01)
+
+#define PROC_HT_FEATURES_HTFEATSETS_FILECODE                             (0xE001)
+#define PROC_HT_FEATURES_HTFEATDYNAMICDISCOVERY_FILECODE                 (0xE002)
+#define PROC_HT_FEATURES_HTFEATGANGING_FILECODE                          (0xE003)
+#define PROC_HT_FEATURES_HTFEATNONCOHERENT_FILECODE                      (0xE004)
+#define PROC_HT_FEATURES_HTFEATOPTIMIZATION_FILECODE                     (0xE005)
+#define PROC_HT_FEATURES_HTFEATROUTING_FILECODE                          (0xE006)
+#define PROC_HT_FEATURES_HTFEATSUBLINKS_FILECODE                         (0xE007)
+#define PROC_HT_FEATURES_HTFEATTRAFFICDISTRIBUTION_FILECODE              (0xE008)
+#define PROC_HT_FEATURES_HTIDS_FILECODE                                  (0xE009)
+#define PROC_HT_HTFEAT_FILECODE                                          (0xE021)
+#define PROC_HT_HTINTERFACE_FILECODE                                     (0xE022)
+#define PROC_HT_HTINTERFACECOHERENT_FILECODE                             (0xE023)
+#define PROC_HT_HTINTERFACEGENERAL_FILECODE                              (0xE024)
+#define PROC_HT_HTINTERFACENONCOHERENT_FILECODE                          (0xE025)
+#define PROC_HT_HTMAIN_FILECODE                                          (0xE026)
+#define PROC_HT_HTNOTIFY_FILECODE                                        (0xE027)
+#define PROC_HT_HTGRAPH_HTGRAPH_FILECODE                                 (0xE028)
+#define PROC_HT_HTNB_FILECODE                                            (0xE081)
+#define PROC_HT_NBCOMMON_HTNBCOHERENT_FILECODE                           (0xE082)
+#define PROC_HT_NBCOMMON_HTNBNONCOHERENT_FILECODE                        (0xE083)
+#define PROC_HT_NBCOMMON_HTNBOPTIMIZATION_FILECODE                       (0xE084)
+#define PROC_HT_NBCOMMON_HTNBUTILITIES_FILECODE                          (0xE085)
+#define PROC_HT_FAM10_HTNBFAM10_FILECODE                                 (0xE0C1)
+#define PROC_HT_FAM10_HTNBCOHERENTFAM10_FILECODE                         (0xE0C2)
+#define PROC_HT_FAM10_HTNBNONCOHERENTFAM10_FILECODE                      (0xE0C3)
+#define PROC_HT_FAM10_HTNBOPTIMIZATIONFAM10_FILECODE                     (0xE0C4)
+#define PROC_HT_FAM10_HTNBSYSTEMFAM10_FILECODE                           (0xE0C5)
+#define PROC_HT_FAM10_HTNBUTILITIESFAM10_FILECODE                        (0xE0C6)
+#define PROC_HT_FAM12_HTNBFAM12_FILECODE                                 (0xE101)
+#define PROC_HT_FAM12_HTNBUTILITIESFAM12_FILECODE                        (0xE102)
+#define PROC_HT_FAM14_HTNBFAM14_FILECODE                                 (0xE141)
+#define PROC_HT_FAM14_HTNBUTILITIESFAM14_FILECODE                        (0xE142)
+#define PROC_HT_FAM15_HTNBFAM15_FILECODE                                 (0xE181)
+#define PROC_HT_FAM15_HTNBCOHERENTFAM15_FILECODE                         (0xE182)
+#define PROC_HT_FAM15_HTNBNONCOHERENTFAM15_FILECODE                      (0xE183)
+#define PROC_HT_FAM15_HTNBOPTIMIZATIONFAM15_FILECODE                     (0xE184)
+#define PROC_HT_FAM15_HTNBSYSTEMFAM15_FILECODE                           (0xE185)
+#define PROC_HT_FAM15_HTNBUTILITIESFAM15_FILECODE                        (0xE186)
+#define PROC_HT_FAM15MOD1X_HTNBFAM15MOD1X_FILECODE                       (0xE187)
+#define PROC_HT_FAM15MOD1X_HTNBUTILITIESFAM15MOD1X_FILECODE              (0xE188)
+#define PROC_HT_FAM14MOD1X_HTNBFAM14MOD1X_FILECODE                       (0xE189)
+#define PROC_HT_FAM14MOD1X_HTNBUTILITIESFAM14MOD1X_FILECODE              (0xE18A)
+#define PROC_HT_FAM15MOD2X_HTNBFAM15MOD2X_FILECODE                             (0xE191)
+#define PROC_HT_FAM15MOD2X_HTNBCOHERENTFAM15MOD2X_FILECODE                     (0xE192)
+#define PROC_HT_FAM15MOD2X_HTNBNONCOHERENTFAM15MOD2X_FILECODE                  (0xE193)
+#define PROC_HT_FAM15MOD2X_HTNBOPTIMIZATIONFAM15MOD2X_FILECODE                 (0xE194)
+#define PROC_HT_FAM15MOD2X_HTNBSYSTEMFAM15MOD2X_FILECODE                       (0xE195)
+#define PROC_HT_FAM15MOD2X_HTNBUTILITIESFAM15MOD2X_FILECODE                    (0xE196)
+
+#define PROC_RECOVERY_HT_HTINITRECOVERY_FILECODE                         (0xE302)
+#define PROC_RECOVERY_HT_HTINITRESET_FILECODE                            (0xE301)
+
+#define PROC_IDS_CONTROL_IDSCTRL_FILECODE                                (0xE801)
+#define PROC_IDS_LIBRARY_IDSLIB_FILECODE                                 (0xE802)
+#define PROC_IDS_DEBUG_IDSDEBUG_FILECODE                                 (0xE803)
+#define PROC_IDS_PERF_IDSPERF_FILECODE                                   (0xE804)
+#define PROC_IDS_FAMILY_0X10_IDSF10ALLSERVICE_FILECODE                   (0xE805)
+#define PROC_IDS_FAMILY_0X10_BL_IDSF10BLSERVICE_FILECODE                 (0xE806)
+#define PROC_IDS_FAMILY_0X10_DA_IDSF10DASERVICE_FILECODE                 (0xE807)
+#define PROC_IDS_FAMILY_0X10_HY_IDSF10HYSERVICE_FILECODE                 (0xE808)
+#define PROC_IDS_FAMILY_0X10_RB_IDSF10RBSERVICE_FILECODE                 (0xE809)
+#define PROC_IDS_FAMILY_0X12_IDSF12ALLSERVICE_FILECODE                   (0xE80A)
+#define PROC_IDS_FAMILY_0X14_IDSF14ALLSERVICE_FILECODE                   (0xE80B)
+#define PROC_IDS_FAMILY_0X15_IDSF15ALLSERVICE_FILECODE                   (0xE80C)
+#define PROC_IDS_FAMILY_0X14_KR_IDSF14KRALLSERVICE_FILECODE              (0xE80D)
+#define PROC_IDS_FAMILY_0X15_OR_IDSF15ORALLSERVICE_FILECODE              (0xE80E)
+#define PROC_IDS_FAMILY_0X15_TN_IDSF15TNALLSERVICE_FILECODE              (0xE80F)
+#define PROC_IDS_LIBRARY_IDSREGACC_FILECODE                              (0xE810)
+
+#define PROC_IDS_DEBUG_IDSIDTTABLE_FILECODE                              (0xE81E)
+#define PROC_IDS_CONTROL_IDSNVTOCMOS_FILECODE                            (0xE81F)
+
+///0xE820 ~ 0xE840 is reserved for ids extend module
+
+#define PROC_MEM_ARDK_MA_FILECODE                                    (0xF001)
+#define PROC_MEM_ARDK_DR_MARDR2_FILECODE                             (0xF002)
+#define PROC_MEM_ARDK_DR_MARDR3_FILECODE                             (0xF003)
+#define PROC_MEM_ARDK_HY_MARHY3_FILECODE                             (0xF004)
+#define PROC_MEM_ARDK_LN_MASLN3_FILECODE                             (0xF005)
+#define PROC_MEM_ARDK_DR_MAUDR3_FILECODE                             (0xF006)
+#define PROC_MEM_ARDK_HY_MAUHY3_FILECODE                             (0xF007)
+#define PROC_MEM_ARDK_LN_MAULN3_FILECODE                             (0xF008)
+#define PROC_MEM_ARDK_DA_MAUDA3_FILECODE                             (0xF009)
+#define PROC_MEM_ARDK_DA_MASDA2_FILECODE                             (0xF00A)
+#define PROC_MEM_ARDK_DA_MASDA3_FILECODE                             (0xF00B)
+#define PROC_MEM_ARDK_NI_MASNI3_FILECODE                             (0xF00C)
+#define PROC_MEM_ARDK_C32_MARC32_3_FILECODE                          (0xF00D)
+#define PROC_MEM_ARDK_C32_MAUC32_3_FILECODE                          (0xF00E)
+#define PROC_MEM_ARDK_NI_MAUNI3_FILECODE                             (0xF00F)
+#define PROC_MEM_ARDK_ON_MASON3_FILECODE                             (0xF010)
+#define PROC_MEM_ARDK_ON_MAUON3_FILECODE                             (0xF011)
+#define PROC_MEM_ARDK_PH_MASPH3_FILECODE                             (0xF012)
+#define PROC_MEM_ARDK_PH_MAUPH3_FILECODE                             (0xF013)
+#define PROC_MEM_ARDK_OR_MAROR3_FILECODE                             (0xF014)
+#define PROC_MEM_ARDK_OR_MAUOR3_FILECODE                             (0xF017)
+#define PROC_MEM_ARDK_RB_MASRB3_FILECODE                             (0xF018)
+#define PROC_MEM_ARDK_RB_MAURB3_FILECODE                             (0xF019)
+
+#define PROC_MEM_FEAT_CHINTLV_MFCHI_FILECODE                         (0xF081)
+#define PROC_MEM_FEAT_CSINTLV_MFCSI_FILECODE                         (0xF082)
+#define PROC_MEM_FEAT_ECC_MFECC_FILECODE                             (0xF083)
+#define PROC_MEM_FEAT_ECC_MFEMP_FILECODE                             (0xF085)
+#define PROC_MEM_FEAT_EXCLUDIMM_MFDIMMEXCLUD_FILECODE                (0xF086)
+#define PROC_MEM_FEAT_IDENDIMM_MFIDENDIMM_FILECODE                   (0xF088)
+#define PROC_MEM_FEAT_INTLVRN_MFINTLVRN_FILECODE                     (0xF089)
+#define PROC_MEM_FEAT_LVDDR3_MFLVDDR3_FILECODE                       (0xF08A)
+#define PROC_MEM_FEAT_MEMCLR_MFMEMCLR_FILECODE                       (0xF08B)
+#define PROC_MEM_FEAT_NDINTLV_MFNDI_FILECODE                         (0xF08C)
+#define PROC_MEM_FEAT_ODTHERMAL_MFODTHERMAL_FILECODE                 (0xF08D)
+#define PROC_MEM_FEAT_OLSPARE_MFSPR_FILECODE                         (0xF08E)
+#define PROC_MEM_FEAT_PARTRN_MFPARALLELTRAINING_FILECODE             (0xF08F)
+#define PROC_MEM_FEAT_PARTRN_MFSTANDARDTRAINING_FILECODE             (0xF091)
+#define PROC_MEM_FEAT_S3_MFS3_FILECODE                               (0xF092)
+#define PROC_MEM_FEAT_TABLE_MFTDS_FILECODE                           (0xF093)
+
+#define PROC_MEM_MAIN_MDEF_FILECODE                                  (0xF101)
+#define PROC_MEM_MAIN_MINIT_FILECODE                                 (0xF102)
+#define PROC_MEM_MAIN_MM_FILECODE                                    (0xF103)
+#define PROC_MEM_FEAT_DMI_MFDMI_FILECODE                             (0xF104)
+#define PROC_MEM_MAIN_MMECC_FILECODE                                 (0xF105)
+#define PROC_MEM_MAIN_MMEXCLUDEDIMM_FILECODE                         (0xF106)
+#define PROC_MEM_MAIN_DR_MMFLOWDR_FILECODE                           (0xF107)
+#define PROC_MEM_MAIN_HY_MMFLOWHY_FILECODE                           (0xF108)
+#define PROC_MEM_MAIN_LN_MMFLOWLN_FILECODE                           (0xF109)
+#define PROC_MEM_MAIN_ON_MMFLOWON_FILECODE                           (0xF10A)
+#define PROC_MEM_MAIN_MMNODEINTERLEAVE_FILECODE                      (0xF10B)
+#define PROC_MEM_MAIN_MMONLINESPARE_FILECODE                         (0xF10C)
+#define PROC_MEM_MAIN_MMPARALLELTRAINING_FILECODE                    (0xF10D)
+#define PROC_MEM_MAIN_MMSTANDARDTRAINING_FILECODE                    (0xF10E)
+#define PROC_MEM_MAIN_MUC_FILECODE                                   (0xF10F)
+#define PROC_MEM_MAIN_MMMEMCLR_FILECODE                              (0xF110)
+#define PROC_MEM_MAIN_DA_MMFLOWDA_FILECODE                           (0xF111)
+#define PROC_MEM_MAIN_MMFLOW_FILECODE                                (0xF112)
+#define PROC_MEM_MAIN_MERRHDL_FILECODE                               (0xF113)
+#define PROC_MEM_MAIN_C32_MMFLOWC32_FILECODE                         (0xF114)
+#define PROC_MEM_MAIN_MMLVDDR3_FILECODE                              (0xF115)
+#define PROC_MEM_MAIN_MMUMAALLOC_FILECODE                            (0xF116)
+#define PROC_MEM_MAIN_MMMEMRESTORE_FILECODE                          (0xF117)
+#define PROC_MEM_MAIN_MMCONDITIONALPSO_FILECODE                      (0xF118)
+#define PROC_MEM_MAIN_OR_MMFLOWOR_FILECODE                           (0xF119)
+#define PROC_MEM_MAIN_RB_MMFLOWRB_FILECODE                           (0xF11A)
+#define PROC_MEM_MAIN_PH_MMFLOWPH_FILECODE                           (0xF11B)
+#define PROC_MEM_MAIN_TN_MMFLOWTN_FILECODE                           (0xF11C)
+#define PROC_MEM_MAIN_KR_MMFLOWKR_FILECODE                           (0xF11D)
+
+#define PROC_MEM_NB_DR_MNDR_FILECODE                                 (0XF213)
+#define PROC_MEM_NB_DR_MNFLOWDR_FILECODE                             (0XF214)
+#define PROC_MEM_NB_DR_MNIDENDIMMDR_FILECODE                         (0XF216)
+#define PROC_MEM_NB_DR_MNMCTDR_FILECODE                              (0XF217)
+#define PROC_MEM_NB_DR_MNDCTDR_FILECODE                              (0XF218)
+#define PROC_MEM_NB_DR_MNOTDR_FILECODE                               (0XF219)
+#define PROC_MEM_NB_DR_MNPARTRAINDR_FILECODE                         (0XF21A)
+#define PROC_MEM_NB_DR_MNPROTODR_FILECODE                            (0XF21C)
+#define PROC_MEM_NB_DR_MNS3DR_FILECODE                               (0XF21D)
+#define PROC_MEM_NB_DR_MNREGDR_FILECODE                              (0XF21E)
+#define PROC_MEM_NB_RB_MNRB_FILECODE                                 (0XF220)
+#define PROC_MEM_NB_RB_MNFLOWRB_FILECODE                             (0XF221)
+#define PROC_MEM_NB_RB_MNS3RB_FILECODE                               (0XF222)
+#define PROC_MEM_NB_RB_MNIDENDIMMRB_FILECODE                         (0XF223)
+#define PROC_MEM_NB_HY_MNFLOWHY_FILECODE                             (0XF233)
+#define PROC_MEM_NB_HY_MNHY_FILECODE                                 (0XF235)
+#define PROC_MEM_NB_HY_MNIDENDIMMHY_FILECODE                         (0XF236)
+#define PROC_MEM_NB_HY_MNMCTHY_FILECODE                              (0XF237)
+#define PROC_MEM_NB_HY_MNDCTHY_FILECODE                              (0XF238)
+#define PROC_MEM_NB_HY_MNOTHY_FILECODE                               (0XF239)
+#define PROC_MEM_NB_HY_MNPARTRAINHY_FILECODE                         (0XF23A)
+#define PROC_MEM_NB_HY_MNPHYHY_FILECODE                              (0XF23B)
+#define PROC_MEM_NB_HY_MNPROTOHY_FILECODE                            (0XF23C)
+#define PROC_MEM_NB_HY_MNS3HY_FILECODE                               (0XF23D)
+#define PROC_MEM_NB_HY_MNREGHY_FILECODE                              (0XF23E)
+#define PROC_MEM_NB_ON_MNON_FILECODE                                 (0xF240)
+#define PROC_MEM_NB_ON_MNREGON_FILECODE                              (0xF241)
+#define PROC_MEM_NB_ON_MNDCTON_FILECODE                              (0xF242)
+#define PROC_MEM_NB_ON_MNIDENDIMMON_FILECODE                         (0xF244)
+#define PROC_MEM_NB_ON_MNMCTON_FILECODE                              (0xF245)
+#define PROC_MEM_NB_ON_MNOTON_FILECODE                               (0xF246)
+#define PROC_MEM_NB_ON_MNPHYON_FILECODE                              (0xF247)
+#define PROC_MEM_NB_ON_MNS3ON_FILECODE                               (0xF248)
+#define PROC_MEM_NB_ON_MNFLOWON_FILECODE                             (0xF249)
+#define PROC_MEM_NB_ON_MNPROTOON_FILECODE                            (0xF24A)
+#define PROC_MEM_NB_LN_MNDCTLN_FILECODE                              (0XF252)
+#define PROC_MEM_NB_LN_MNFLOWLN_FILECODE                             (0XF253)
+#define PROC_MEM_NB_LN_MNIDENDIMMLN_FILECODE                         (0XF254)
+#define PROC_MEM_NB_LN_MNMCTLN_FILECODE                              (0XF255)
+#define PROC_MEM_NB_LN_MNOTLN_FILECODE                               (0XF256)
+#define PROC_MEM_NB_LN_MNPHYLN_FILECODE                              (0XF257)
+#define PROC_MEM_NB_LN_MNPROTOLN_FILECODE                            (0XF258)
+#define PROC_MEM_NB_LN_MNLN_FILECODE                                 (0XF259)
+#define PROC_MEM_NB_LN_MNS3LN_FILECODE                               (0XF25A)
+#define PROC_MEM_NB_LN_MNREGLN_FILECODE                              (0XF25B)
+#define PROC_MEM_NB_DA_MNDA_FILECODE                                 (0XF260)
+#define PROC_MEM_NB_DA_MNFLOWDA_FILECODE                             (0XF261)
+#define PROC_MEM_NB_DA_MNIDENDIMMDA_FILECODE                         (0XF263)
+#define PROC_MEM_NB_DA_MNMCTDA_FILECODE                              (0XF264)
+#define PROC_MEM_NB_DA_MNDCTDA_FILECODE                              (0XF265)
+#define PROC_MEM_NB_DA_MNOTDA_FILECODE                               (0XF266)
+#define PROC_MEM_NB_DA_MNPARTRAINDA_FILECODE                         (0XF267)
+#define PROC_MEM_NB_DA_MNPROTODA_FILECODE                            (0XF269)
+#define PROC_MEM_NB_DA_MNS3DA_FILECODE                               (0XF26A)
+#define PROC_MEM_NB_DA_MNREGDA_FILECODE                              (0XF26B)
+#define PROC_MEM_NB_C32_MNC32_FILECODE                               (0XF26C)
+#define PROC_MEM_NB_C32_MNDCTC32_FILECODE                            (0XF26D)
+#define PROC_MEM_NB_C32_MNFLOWC32_FILECODE                           (0XF26E)
+#define PROC_MEM_NB_C32_MNIDENDIMMC32_FILECODE                       (0XF26F)
+#define PROC_MEM_NB_C32_MNMCTC32_FILECODE                            (0XF270)
+#define PROC_MEM_NB_C32_MNOTC32_FILECODE                             (0XF271)
+#define PROC_MEM_NB_C32_MNPARTRAINC32_FILECODE                       (0XF272)
+#define PROC_MEM_NB_C32_MNPHYC32_FILECODE                            (0XF273)
+#define PROC_MEM_NB_C32_MNPROTOC32_FILECODE                          (0XF274)
+#define PROC_MEM_NB_C32_MNS3C32_FILECODE                             (0XF275)
+#define PROC_MEM_NB_C32_MNREGC32_FILECODE                            (0XF277)
+#define PROC_MEM_NB_MN_FILECODE                                      (0XF27C)
+#define PROC_MEM_NB_MNDCT_FILECODE                                   (0XF27D)
+#define PROC_MEM_NB_MNPHY_FILECODE                                   (0XF27E)
+#define PROC_MEM_NB_MNMCT_FILECODE                                   (0XF27F)
+#define PROC_MEM_NB_MNS3_FILECODE                                    (0XF280)
+#define PROC_MEM_NB_MNFLOW_FILECODE                                  (0XF281)
+#define PROC_MEM_NB_MNFEAT_FILECODE                                  (0XF282)
+#define PROC_MEM_NB_MNTRAIN2_FILECODE                                (0XF283)
+#define PROC_MEM_NB_MNTRAIN3_FILECODE                                (0XF284)
+#define PROC_MEM_NB_MNREG_FILECODE                                   (0XF285)
+#define PROC_MEM_NB_NI_MNNI_FILECODE                                 (0XF286)
+#define PROC_MEM_NB_NI_MNS3NI_FILECODE                               (0XF287)
+#define PROC_MEM_NB_NI_MNFLOWNI_FILECODE                             (0XF288)
+#define PROC_MEM_NB_PH_MNFLOWPH_FILECODE                             (0XF289)
+#define PROC_MEM_NB_PH_MNPH_FILECODE                                 (0XF28A)
+#define PROC_MEM_NB_PH_MNS3PH_FILECODE                               (0XF28B)
+#define PROC_MEM_NB_PH_MNIDENDIMMPH_FILECODE                         (0XF28C)
+#define PROC_MEM_NB_PH_MNMCTPH_FILECODE                              (0XF28D)
+#define PROC_MEM_NB_OR_MNFLOWOR_FILECODE                             (0XF290)
+#define PROC_MEM_NB_OR_MNOR_FILECODE                                 (0XF291)
+#define PROC_MEM_NB_OR_MNIDENDIMMOR_FILECODE                         (0XF292)
+#define PROC_MEM_NB_OR_MNMCTOR_FILECODE                              (0XF293)
+#define PROC_MEM_NB_OR_MNDCTOR_FILECODE                              (0XF294)
+#define PROC_MEM_NB_OR_MNOTOR_FILECODE                               (0XF295)
+#define PROC_MEM_NB_OR_MNPARTRAINOR_FILECODE                         (0XF296)
+#define PROC_MEM_NB_OR_MNPHYOR_FILECODE                              (0XF297)
+#define PROC_MEM_NB_OR_MNPROTOOR_FILECODE                            (0XF298)
+#define PROC_MEM_NB_OR_MNS3OR_FILECODE                               (0XF299)
+#define PROC_MEM_NB_OR_MNREGOR_FILECODE                              (0XF29A)
+#define PROC_MEM_NB_TN_MNREGTN_FILECODE                              (0XF29B)
+#define PROC_MEM_NB_TN_MNTN_FILECODE                                 (0XF29C)
+#define PROC_MEM_NB_TN_MNMCTTN_FILECODE                              (0XF29D)
+#define PROC_MEM_NB_TN_MNOTTN_FILECODE                               (0XF29E)
+#define PROC_MEM_NB_TN_MNDCTTN_FILECODE                              (0XF29F)
+#define PROC_MEM_NB_TN_MNPHYTN_FILECODE                              (0XF2A0)
+#define PROC_MEM_NB_TN_MNS3TN_FILECODE                               (0XF2A1)
+#define PROC_MEM_NB_TN_MNIDENDIMMTN_FILECODE                         (0XF2A2)
+#define PROC_MEM_NB_TN_MNFLOWTN_FILECODE                             (0XF2A3)
+#define PROC_MEM_NB_TN_MNPROTOTN_FILECODE                            (0XF2A4)
+#define PROC_MEM_NB_KR_MNREGKR_FILECODE                              (0xF2A5)
+#define PROC_MEM_NB_KR_MNDCTKR_FILECODE                              (0xF2A6)
+#define PROC_MEM_NB_KR_MNIDENDIMMKR_FILECODE                         (0xF2A7)
+#define PROC_MEM_NB_KR_MNMCTKR_FILECODE                              (0xF2A8)
+#define PROC_MEM_NB_KR_MNOTKR_FILECODE                               (0xF2A9)
+#define PROC_MEM_NB_KR_MNPHYKR_FILECODE                              (0xF2AA)
+#define PROC_MEM_NB_KR_MNS3KR_FILECODE                               (0xF2AB)
+#define PROC_MEM_NB_KR_MNFLOWKR_FILECODE                             (0xF2AC)
+#define PROC_MEM_NB_KR_MNPROTOKR_FILECODE                            (0xF2AD)
+#define PROC_MEM_NB_KR_MNKR_FILECODE                                 (0xF2AE)
+#define PROC_MEM_NB_KM_MNREGKM_FILECODE                              (0XF2AF)
+#define PROC_MEM_NB_KM_MNKM_FILECODE                                 (0XF2B0)
+#define PROC_MEM_NB_KM_MNMCTKM_FILECODE                              (0XF2B1)
+#define PROC_MEM_NB_KM_MNOTKM_FILECODE                               (0XF2B2)
+#define PROC_MEM_NB_KM_MNDCTKM_FILECODE                              (0XF2B3)
+#define PROC_MEM_NB_KM_MNPHYKM_FILECODE                              (0XF2B4)
+#define PROC_MEM_NB_KM_MNS3KM_FILECODE                               (0XF2B5)
+#define PROC_MEM_NB_KM_MNIDENDIMMKM_FILECODE                         (0XF2B6)
+#define PROC_MEM_NB_KM_MNFLOWKM_FILECODE                             (0XF2B7)
+#define PROC_MEM_NB_KM_MNPROTOKM_FILECODE                            (0XF2B8)
+
+
+#define PROC_MEM_PS_MP_FILECODE                                      (0XF401)
+#define PROC_MEM_PS_DR_MPRDR3_FILECODE                               (0XF402)
+#define PROC_MEM_PS_HY_MPRHY3_FILECODE                               (0XF403)
+#define PROC_MEM_PS_LN_MPRLN3_FILECODE                               (0XF404)
+#define PROC_MEM_PS_DR_MPSDR3_FILECODE                               (0XF405)
+#define PROC_MEM_PS_HY_MPSHY3_FILECODE                               (0XF406)
+#define PROC_MEM_PS_LN_MPSLN3_FILECODE                               (0XF407)
+#define PROC_MEM_PS_DR_MPUDR3_FILECODE                               (0XF408)
+#define PROC_MEM_PS_HY_MPUHY3_FILECODE                               (0XF409)
+#define PROC_MEM_PS_LN_MPULN3_FILECODE                               (0XF40A)
+#define PROC_MEM_PS_DA_MPUDA3_FILECODE                               (0XF40B)
+#define PROC_MEM_PS_DA_MPSDA2_FILECODE                               (0XF40C)
+#define PROC_MEM_PS_DA_MPSDA3_FILECODE                               (0XF40D)
+#define PROC_MEM_PS_DR_MPRDR2_FILECODE                               (0XF40E)
+#define PROC_MEM_PS_DR_MPUDR2_FILECODE                               (0XF40F)
+#define PROC_MEM_PS_C32_MPRC32_3_FILECODE                            (0XF410)
+#define PROC_MEM_PS_C32_MPUC32_3_FILECODE                            (0XF411)
+#define PROC_MEM_PS_NI_MPSNI3_FILECODE                               (0XF412)
+#define PROC_MEM_PS_NI_MPUNI3_FILECODE                               (0XF413)
+#define PROC_MEM_PS_ON_MPSON3_FILECODE                               (0XF414)
+#define PROC_MEM_PS_ON_MPUON3_FILECODE                               (0XF415)
+#define PROC_MEM_PS_PH_MPSPH3_FILECODE                               (0XF416)
+#define PROC_MEM_PS_PH_MPUPH3_FILECODE                               (0XF417)
+#define PROC_MEM_PS_RB_MPSRB3_FILECODE                               (0XF418)
+#define PROC_MEM_PS_RB_MPURB3_FILECODE                               (0XF419)
+#define PROC_MEM_PS_OR_AM3_MPUORA3_FILECODE                          (0XF41A)
+#define PROC_MEM_PS_OR_AM3_MPSORA3_FILECODE                          (0XF41B)
+#define PROC_MEM_PS_OR_C32_MPRORC3_FILECODE                          (0XF41C)
+#define PROC_MEM_PS_OR_C32_MPUORC3_FILECODE                          (0XF41D)
+#define PROC_MEM_PS_OR_C32_MPLORC3_FILECODE                          (0XF41E)
+#define PROC_MEM_PS_OR_G34_MPRORG3_FILECODE                          (0XF41F)
+#define PROC_MEM_PS_OR_G34_MPUORG3_FILECODE                          (0XF420)
+#define PROC_MEM_PS_OR_G34_MPLORG3_FILECODE                          (0XF421)
+#define PROC_MEM_PS_MPRTT_FILECODE                                   (0XF422)
+#define PROC_MEM_PS_MPMAXFREQ_FILECODE                               (0XF423)
+#define PROC_MEM_PS_MPODTPAT_FILECODE                                (0XF424)
+#define PROC_MEM_PS_MPSAO_FILECODE                                   (0XF425)
+#define PROC_MEM_PS_MPMR0_FILECODE                                   (0XF426)
+#define PROC_MEM_PS_MPRC2IBT_FILECODE                                (0XF427)
+#define PROC_MEM_PS_MPRC10OPSPD_FILECODE                             (0XF428)
+#define PROC_MEM_PS_MPLRIBT_FILECODE                                 (0XF429)
+#define PROC_MEM_PS_MPLRNPR_FILECODE                                 (0XF42A)
+#define PROC_MEM_PS_MPLRNLR_FILECODE                                 (0XF42B)
+#define PROC_MEM_PS_OR_MPOR3_FILECODE                                (0XF42C)
+#define PROC_MEM_PS_TN_MPSTN3_FILECODE                               (0XF42D)
+#define PROC_MEM_PS_TN_MPTN3_FILECODE                                (0XF42E)
+#define PROC_MEM_PS_TN_MPUTN3_FILECODE                               (0XF42F)
+#define PROC_MEM_PS_TN_FM2_MPUTNFM2_FILECODE                         (0XF430)
+#define PROC_MEM_PS_TN_FP2_MPSTNFP2_FILECODE                         (0XF431)
+#define PROC_MEM_PS_TN_FS1_MPSTNFS1_FILECODE                         (0XF432)
+#define PROC_MEM_PS_KR_MPKR3_FILECODE                                (0XF433)
+#define PROC_MEM_PS_KR_MPUKR3_FILECODE                               (0XF434)
+#define PROC_MEM_PS_KR_MPSKR3_FILECODE                               (0XF435)
+#define PROC_MEM_PS_MPS___FILECODE                                   (0XF436)
+#define PROC_MEM_PS_KM_FM2_MPUKMFM2_FILECODE                         (0XF437)
+#define PROC_MEM_PS_KM_FM2_MPSKMFM2_FILECODE                         (0XF438)
+#define PROC_MEM_PS_KM_C2012_MPRKMC3_FILECODE                        (0XF439)
+#define PROC_MEM_PS_KM_C2012_MPUKMC3_FILECODE                        (0XF43A)
+#define PROC_MEM_PS_KM_C2012_MPLKMC3_FILECODE                        (0XF43B)
+#define PROC_MEM_PS_KM_G2012_MPRKMG3_FILECODE                        (0XF43C)
+#define PROC_MEM_PS_KM_G2012_MPUKMG3_FILECODE                        (0XF43D)
+#define PROC_MEM_PS_KM_G2012_MPLKMG3_FILECODE                        (0XF43E)
+#define PROC_MEM_PS_KM_MPKM3_FILECODE                                (0XF43F)
+#define PROC_MEM_PS_MPSEEDS_FILECODE                                 (0XF440)
+
+#define PROC_MEM_TECH_MT_FILECODE                                    (0XF501)
+#define PROC_MEM_TECH_MTHDI_FILECODE                                 (0XF502)
+#define PROC_MEM_TECH_MTTDIMBT_FILECODE                              (0XF504)
+#define PROC_MEM_TECH_MTTECC_FILECODE                                (0XF505)
+#define PROC_MEM_TECH_MTTHRC_FILECODE                                (0XF506)
+#define PROC_MEM_TECH_MTTML_FILECODE                                 (0XF507)
+#define PROC_MEM_TECH_MTTOPTSRC_FILECODE                             (0XF509)
+#define PROC_MEM_TECH_MTTSRC_FILECODE                                (0XF50B)
+#define PROC_MEM_TECH_MTTEDGEDETECT_FILECODE                         (0XF50C)
+#define PROC_MEM_TECH_DDR2_MT2_FILECODE                              (0XF541)
+#define PROC_MEM_TECH_DDR2_MTOT2_FILECODE                            (0XF543)
+#define PROC_MEM_TECH_DDR2_MTSPD2_FILECODE                           (0XF544)
+#define PROC_MEM_TECH_DDR3_MT3_FILECODE                              (0XF581)
+#define PROC_MEM_TECH_DDR3_MTOT3_FILECODE                            (0XF583)
+#define PROC_MEM_TECH_DDR3_MTRCI3_FILECODE                           (0XF584)
+#define PROC_MEM_TECH_DDR3_MTSDI3_FILECODE                           (0XF585)
+#define PROC_MEM_TECH_DDR3_MTSPD3_FILECODE                           (0XF586)
+#define PROC_MEM_TECH_DDR3_MTTWL3_FILECODE                           (0XF587)
+#define PROC_MEM_TECH_DDR3_MTTECC3_FILECODE                          (0XF588)
+#define PROC_MEM_TECH_DDR3_MTLRDIMM3_FILECODE                        (0XF589)
+#define PROC_MEM_TECH_MTTHRCSEEDTRAIN_FILECODE                       (0XF58A)
+
+#define PROC_RECOVERY_MEM_MRDEF_FILECODE                             (0XF801)
+#define PROC_RECOVERY_MEM_MRINIT_FILECODE                            (0XF802)
+#define PROC_RECOVERY_MEM_MRM_FILECODE                               (0XF803)
+#define PROC_RECOVERY_MEM_MRUC_FILECODE                              (0XF804)
+#define PROC_RECOVERY_MEM_NB_DR_MRNDR_FILECODE                       (0XF812)
+#define PROC_RECOVERY_MEM_NB_DR_MRNMCTDR_FILECODE                    (0XF813)
+#define PROC_RECOVERY_MEM_NB_HY_MRNDCTHY_FILECODE                    (0XF821)
+#define PROC_RECOVERY_MEM_NB_HY_MRNHY_FILECODE                       (0XF822)
+#define PROC_RECOVERY_MEM_NB_HY_MRNMCTHY_FILECODE                    (0XF823)
+#define PROC_RECOVERY_MEM_NB_HY_MRNPROTOHY_FILECODE                  (0XF825)
+#define PROC_RECOVERY_MEM_NB_LN_MRNDCTLN_FILECODE                    (0XF831)
+#define PROC_RECOVERY_MEM_NB_LN_MRNMCTLN_FILECODE                    (0XF832)
+#define PROC_RECOVERY_MEM_NB_LN_MRNLN_FILECODE                       (0XF833)
+#define PROC_RECOVERY_MEM_NB_DA_MRNDA_FILECODE                       (0XF842)
+#define PROC_RECOVERY_MEM_NB_DA_MRNMCTDA_FILECODE                    (0XF843)
+#define PROC_RECOVERY_MEM_NB_NI_MRNNI_FILECODE                       (0XF845)
+#define PROC_RECOVERY_MEM_NB_C32_MRNC32_FILECODE                     (0XF851)
+#define PROC_RECOVERY_MEM_NB_C32_MRNMCTC32_FILECODE                  (0XF852)
+#define PROC_RECOVERY_MEM_NB_C32_MRNPROTOC32_FILECODE                (0XF853)
+#define PROC_RECOVERY_MEM_NB_ON_MRNDCTON_FILECODE                    (0xF861)
+#define PROC_RECOVERY_MEM_NB_ON_MRNMCTON_FILECODE                    (0xF862)
+#define PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE                       (0xF863)
+#define PROC_RECOVERY_MEM_NB_PH_MRNPH_FILECODE                       (0xF871)
+#define PROC_RECOVERY_MEM_NB_RB_MRNRB_FILECODE                       (0xF881)
+#define PROC_RECOVERY_MEM_NB_KR_MRNDCTKR_FILECODE                    (0xF891)
+#define PROC_RECOVERY_MEM_NB_KR_MRNMCTKR_FILECODE                    (0xF892)
+#define PROC_RECOVERY_MEM_NB_KR_MRNKR_FILECODE                       (0xF893)
+#define PROC_RECOVERY_MEM_TECH_MRTTPOS_FILECODE                      (0XF8C1)
+#define PROC_RECOVERY_MEM_TECH_MRTTSRC_FILECODE                      (0XF8C2)
+#define PROC_RECOVERY_MEM_TECH_DDR3_MRT3_FILECODE                    (0XF8C3)
+#define PROC_RECOVERY_MEM_TECH_DDR3_MRTRCI3_FILECODE                 (0XF8C4)
+#define PROC_RECOVERY_MEM_TECH_DDR3_MRTSDI3_FILECODE                 (0XF8C5)
+#define PROC_RECOVERY_MEM_TECH_DDR3_MRTSPD3_FILECODE                 (0XF8C6)
+#define PROC_RECOVERY_MEM_TECH_DDR3_MRTTWL3_FILECODE                 (0XF8C7)
+#define PROC_RECOVERY_MEM_NB_MRN_FILECODE                            (0XF8C8)
+#define PROC_RECOVERY_MEM_NB_MRNDCT_FILECODE                         (0XF8C9)
+#define PROC_RECOVERY_MEM_NB_MRNMCT_FILECODE                         (0XF8CA)
+#define PROC_RECOVERY_MEM_NB_MRNTRAIN3_FILECODE                      (0XF8CB)
+#define PROC_RECOVERY_MEM_TECH_MRTTHRC_FILECODE                      (0XF8CC)
+#define PROC_RECOVERY_MEM_NB_OR_MRNDCTOR_FILECODE                    (0XF8CD)
+#define PROC_RECOVERY_MEM_NB_OR_MRNOR_FILECODE                       (0XF8CE)
+#define PROC_RECOVERY_MEM_NB_OR_MRNMCTOR_FILECODE                    (0XF8CF)
+#define PROC_RECOVERY_MEM_NB_OR_MRNPROTOOR_FILECODE                  (0XF8D0)
+#define PROC_RECOVERY_MEM_PS_MRP_FILECODE                            (0XF8E0)
+#define PROC_RECOVERY_MEM_PS_MRPRTT_FILECODE                         (0XF8E1)
+#define PROC_RECOVERY_MEM_PS_MRPODTPAT_FILECODE                      (0XF8E2)
+#define PROC_RECOVERY_MEM_PS_MRPSAO_FILECODE                         (0XF8E3)
+#define PROC_RECOVERY_MEM_PS_MRPMR0_FILECODE                         (0XF8E4)
+#define PROC_RECOVERY_MEM_PS_MRPRC2IBT_FILECODE                      (0XF8E5)
+#define PROC_RECOVERY_MEM_PS_MRPRC10OPSPD_FILECODE                   (0XF8E6)
+#define PROC_RECOVERY_MEM_PS_MRPLRIBT_FILECODE                       (0XF8E7)
+#define PROC_RECOVERY_MEM_PS_MRPLRNPR_FILECODE                       (0XF8E8)
+#define PROC_RECOVERY_MEM_PS_MRPLRNLR_FILECODE                       (0XF8E9)
+#define PROC_RECOVERY_MEM_NB_TN_MRNDCTTN_FILECODE                    (0XF8F3)
+#define PROC_RECOVERY_MEM_NB_TN_MRNTN_FILECODE                       (0XF8F4)
+#define PROC_RECOVERY_MEM_NB_TN_MRNMCTTN_FILECODE                    (0XF8F5)
+#define PROC_RECOVERY_MEM_NB_TN_MRNPROTOTN_FILECODE                  (0XF8F6)
+#define PROC_RECOVERY_MEM_PS_TN_MRPSTN3_FILECODE                     (0XF8F7)
+#define PROC_RECOVERY_MEM_PS_TN_MRPTN3_FILECODE                      (0XF8F8)
+#define PROC_RECOVERY_MEM_PS_TN_MRPUTN3_FILECODE                     (0XF8F9)
+#define PROC_RECOVERY_MEM_NB_KM_MRNDCTKM_FILECODE                    (0XF8FA)
+#define PROC_RECOVERY_MEM_NB_KM_MRNKM_FILECODE                       (0XF8FB)
+#define PROC_RECOVERY_MEM_NB_KM_MRNMCTKM_FILECODE                    (0XF8FC)
+#define PROC_RECOVERY_MEM_NB_KM_MRNPROTOKM_FILECODE                  (0XF8FD)
+#define PROC_RECOVERY_MEM_TECH_MRTTHRCSEEDTRAIN_FILECODE             (0XF8FE)
+
+#endif // _FILECODE_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/GeneralServices.h b/src/vendorcode/amd/agesa/f15/Include/GeneralServices.h
new file mode 100644
index 0000000000..3b2bc80dc9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/GeneralServices.h
@@ -0,0 +1,202 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * General Services
+ *
+ * Provides Services similar to the external General Services API, except
+ * suited to use within AGESA components.  Socket, Core and PCI identification.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Common
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _GENERAL_SERVICES_H_
+#define _GENERAL_SERVICES_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define NUMBER_OF_EVENT_DATA_PARAMS 4
+
+/**
+ * AMD Device id for MMIO check.
+ */
+#define AMD_DEV_VEN_ID 0x1022
+#define AMD_DEV_VEN_ID_ADDRESS 0
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * An AGESA Event Log entry.
+ */
+typedef struct {
+  AGESA_STATUS EventClass;   ///< The severity of the event, its associated AGESA_STATUS.
+  UINT32   EventInfo;        ///< Uniquely identifies the event.
+  UINT32   DataParam1;       ///< Event specific additional data
+  UINT32   DataParam2;       ///< Event specific additional data
+  UINT32   DataParam3;       ///< Event specific additional data
+  UINT32   DataParam4;       ///< Event specific additional data
+} AGESA_EVENT;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Get a specified Core's APIC ID.
+ *
+ * @param[in]    StdHeader    Header for library and services.
+ * @param[in]    Socket       The Core's Socket.
+ * @param[in]    Core         The Core id.
+ * @param[out]   ApicAddress  The Core's APIC ID.
+ * @param[out]   AgesaStatus  Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ * @retval       TRUE         The core is present, APIC Id valid
+ * @retval       FALSE        The core is not present, APIC Id not valid.
+ */
+BOOLEAN
+GetApicId (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT32            Socket,
+  IN       UINT32            Core,
+     OUT   UINT8             *ApicAddress,
+     OUT   AGESA_STATUS      *AgesaStatus
+);
+
+/**
+ * Get Processor Module's PCI Config Space address.
+ *
+ * @param[in]    StdHeader    Header for library and services.
+ * @param[in]    Socket       The Core's Socket.
+ * @param[in]    Module       The Module in that Processor
+ * @param[out]   PciAddress   The Processor's PCI Config Space address (Function 0, Register 0)
+ * @param[out]   AgesaStatus  Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ * @retval       TRUE         The core is present, PCI Address valid
+ * @retval       FALSE        The core is not present, PCI Address not valid.
+ */
+BOOLEAN
+GetPciAddress (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT32            Socket,
+  IN       UINT32            Module,
+     OUT   PCI_ADDR          *PciAddress,
+     OUT   AGESA_STATUS      *AgesaStatus
+);
+
+/**
+ * "Who am I" for the current running core.
+ *
+ * @param[in]    StdHeader    Header for library and services.
+ * @param[out]   Socket       The current Core's Socket
+ * @param[out]   Module       The current Core's Processor Module
+ * @param[out]   Core         The current Core's core id.
+ * @param[out]   AgesaStatus  Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ */
+VOID
+IdentifyCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+     OUT   UINT32            *Socket,
+     OUT   UINT32            *Module,
+     OUT   UINT32            *Core,
+     OUT   AGESA_STATUS      *AgesaStatus
+);
+
+/**
+ *  A boolean function determine executed CPU is BSP core.
+ */
+BOOLEAN
+IsBsp (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+     OUT   AGESA_STATUS      *AgesaStatus
+  );
+
+/**
+ * This function logs AGESA events into the event log.
+ */
+VOID
+PutEventLog (
+  IN       AGESA_STATUS EventClass,
+  IN       UINT32 EventInfo,
+  IN       UINT32 DataParam1,
+  IN       UINT32 DataParam2,
+  IN       UINT32 DataParam3,
+  IN       UINT32 DataParam4,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * This function gets event logs from the circular buffer.
+ */
+AGESA_STATUS
+GetEventLog (
+     OUT   AGESA_EVENT *EventRecord,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * This function gets event logs from the circular buffer without flushing the entry.
+ */
+BOOLEAN
+PeekEventLog (
+     OUT   AGESA_EVENT *EventRecord,
+  IN       UINT16 Index,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This routine programs the registers necessary to get the PCI MMIO mechanism
+ * up and functioning.
+ */
+VOID
+InitializePciMmio (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+#endif  // _GENERAL_SERVICES_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/GnbInterface.h b/src/vendorcode/amd/agesa/f15/Include/GnbInterface.h
new file mode 100644
index 0000000000..ca53656996
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/GnbInterface.h
@@ -0,0 +1,100 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB API definition.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:     AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBINTERFACE_H_
+#define _GNBINTERFACE_H_
+
+AGESA_STATUS
+GnbInitAtReset (
+  IN      AMD_CONFIG_PARAMS       *StdHeader
+  );
+
+AGESA_STATUS
+GnbInitAtEarly (
+  IN OUT  AMD_EARLY_PARAMS        *EarlyParamsPtr
+  );
+
+AGESA_STATUS
+GnbInitAtPost (
+  IN OUT  AMD_POST_PARAMS         *PostParamsPtr
+  );
+
+VOID
+GnbInitDataStructAtEnvDef (
+  IN OUT  GNB_ENV_CONFIGURATION   *GnbEnvConfigPtr,
+  IN      AMD_ENV_PARAMS          *EnvParamsPtr
+  );
+
+AGESA_STATUS
+GnbInitAtEnv (
+  IN       AMD_ENV_PARAMS          *EnvParamsPtr
+  );
+
+AGESA_STATUS
+GnbInitAtMid (
+  IN OUT   AMD_MID_PARAMS          *MidParamsPtr
+  );
+
+AGESA_STATUS
+GnbInitAtLate (
+  IN OUT   AMD_LATE_PARAMS         *LateParamsPtr
+  );
+
+AGESA_STATUS
+GnbInitAtPostAfterDram (
+  IN OUT   AMD_POST_PARAMS         *PostParamsPtr
+  );
+
+AGESA_STATUS
+AmdGnbRecovery (
+  IN       AMD_CONFIG_PARAMS        *StdHeader
+  );
+
+AGESA_STATUS
+GnbInitAtEarlier (
+  IN OUT   AMD_EARLY_PARAMS        *EarlyParamsPtr
+  );
+#endif
diff --git a/src/vendorcode/amd/agesa/f15/Include/GnbInterfaceStub.h b/src/vendorcode/amd/agesa/f15/Include/GnbInterfaceStub.h
new file mode 100644
index 0000000000..e4f89d859a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/GnbInterfaceStub.h
@@ -0,0 +1,301 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ *
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  GNB
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GnbInitAtReset (
+  IN      AMD_CONFIG_PARAMS       *StdHeader
+  );
+
+AGESA_STATUS
+GnbInitAtEarly (
+  IN OUT   AMD_EARLY_PARAMS        *EarlyParamsPtr
+  );
+
+VOID
+GnbInitDataStructAtEnvDef (
+  IN OUT  GNB_ENV_CONFIGURATION   *GnbEnvConfigPtr,
+  IN      AMD_ENV_PARAMS          *EnvParamsPtr
+  );
+
+AGESA_STATUS
+GnbInitAtEnv (
+  IN       AMD_ENV_PARAMS          *EnvParamsPtr
+  );
+
+AGESA_STATUS
+GnbInitAtPost (
+  IN OUT  AMD_POST_PARAMS         *PostParamsPtr
+  );
+
+AGESA_STATUS
+GnbInitAtMid (
+  IN OUT   AMD_MID_PARAMS          *MidParamsPtr
+  );
+
+AGESA_STATUS
+GnbInitAtLate (
+  IN OUT   AMD_LATE_PARAMS         *LateParamsPtr
+  );
+
+AGESA_STATUS
+AmdGnbRecovery (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+GnbInitAtPostAfterDram (
+  IN OUT   AMD_POST_PARAMS         *PostParamsPtr
+  );
+
+AGESA_STATUS
+GnbInitAtEarlier (
+  IN OUT   AMD_EARLY_PARAMS        *EarlyParamsPtr
+  );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Reset Stub
+ *
+ *
+ *
+ * @param[in] StdHeader           Standard configuration header
+ * @retval    AGESA_SUCCESS       Always succeeds
+ */
+
+AGESA_STATUS
+GnbInitAtReset (
+  IN      AMD_CONFIG_PARAMS       *StdHeader
+  )
+{
+
+  return  AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Early Stub
+ *
+ *
+ *
+ * @param[in,out] EarlyParamsPtr    Pointer to early configuration params.
+ * @retval        AGESA_SUCCESS     Always succeeds
+ */
+
+AGESA_STATUS
+GnbInitAtEarly (
+  IN OUT   AMD_EARLY_PARAMS        *EarlyParamsPtr
+  )
+{
+  return  AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Default constructor of GNB configuration at Env
+ *
+ *
+ *
+ * @param[in] GnbEnvConfigPtr     Pointer to gnb env configuration params.
+ * @param[in] EnvParamsPtr        Pointer to env configuration params.
+ */
+VOID
+GnbInitDataStructAtEnvDef (
+  IN OUT  GNB_ENV_CONFIGURATION   *GnbEnvConfigPtr,
+  IN      AMD_ENV_PARAMS          *EnvParamsPtr
+  )
+{
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Env
+ *
+ *
+ *
+ * @param[in] EnvParamsPtr        Pointer to env configuration params.
+* @retval     AGESA_SUCCESS       Always succeeds
+ */
+
+AGESA_STATUS
+GnbInitAtEnv (
+  IN       AMD_ENV_PARAMS          *EnvParamsPtr
+  )
+{
+
+  return  AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Post
+ *
+ *
+ *
+ * @param[in,out] PostParamsPtr    Pointer to Post configuration params.
+ * @retval        AGESA_SUCCESS   Always succeeds
+ */
+
+AGESA_STATUS
+GnbInitAtPost (
+  IN OUT  AMD_POST_PARAMS         *PostParamsPtr
+  )
+{
+
+  return  AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Mid post
+ *
+ *
+ *
+ * @param[in,out] MidParamsPtr    Pointer to mid configuration params.
+ * @retval        AGESA_SUCCESS   Always succeeds
+ */
+
+AGESA_STATUS
+GnbInitAtMid (
+  IN OUT   AMD_MID_PARAMS          *MidParamsPtr
+  )
+{
+
+  return  AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Late post
+ *
+ *
+ *
+ * @param[in,out] LateParamsPtr     Pointer to late configuration params.
+ * @retval        AGESA_SUCCESS     Always succeeds
+ */
+
+AGESA_STATUS
+GnbInitAtLate (
+  IN OUT   AMD_LATE_PARAMS         *LateParamsPtr
+  )
+{
+
+  return  AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * AmdGnbRecovery
+ *
+ *
+ *
+ * @param[in] StdHeader       Standard configuration header
+ * @retval    AGESA_SUCCESS   Always succeeds
+ */
+AGESA_STATUS
+AmdGnbRecovery (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  return  AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Post after DRAM init
+ *
+ *
+ *
+ * @param[in]     PostParamsPtr   Pointer to post configuration parameters
+ * @retval        AGESA_SUCCESS   Always succeeds
+ */
+
+AGESA_STATUS
+GnbInitAtPostAfterDram (
+  IN OUT   AMD_POST_PARAMS         *PostParamsPtr
+  )
+{
+  return  AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Early Before CPU Stub
+ *
+ *
+ *
+ * @param[in,out] EarlyParamsPtr    Pointer to early configuration params.
+ * @retval        AGESA_SUCCESS     Always succeeds
+ */
+
+AGESA_STATUS
+GnbInitAtEarlier (
+  IN OUT   AMD_EARLY_PARAMS        *EarlyParamsPtr
+  )
+{
+  return  AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Include/GnbPage.h b/src/vendorcode/amd/agesa/f15/Include/GnbPage.h
new file mode 100644
index 0000000000..2ccdfc593a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/GnbPage.h
@@ -0,0 +1,1972 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Create outline and references for GNB Component mainpage documentation.
+ *
+ * Design guides, maintenance guides, and general documentation, are
+ * collected using this file onto the documentation mainpage.
+ * This file contains doxygen comment blocks, only.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Documentation
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 01:16:51 -0800 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/**
+ * @page gnbmain GNB Component Documentation
+ *
+ * Additional documentation for the GNB component consists of
+ *
+ * - Maintenance Guides:
+ *   - @subpage F12PcieLaneDescription    "Family 0x12 PCIe/DDI Lane description table"
+ *   - @subpage F14ONPcieLaneDescription  "Family 0x14(ON) PCIe/DDI Lane description table"
+ *   - @subpage F12LaneConfigurations     "Family 0x12 PCIe port/DDI link configurations"
+ *   - @subpage F14ONLaneConfigurations   "Family 0x14(ON) PCIe port/DDI link configurations"
+ *   - @subpage F12DualLinkDviDescription "Family 0x12 Dual Link DVI connector description"
+ *   - add here >>>
+ * - Design Guides:
+ *   - add here >>>
+ *
+ */
+
+
+/**
+ *  @page F12PcieLaneDescription Family 0x12 PCIe/DDI Lanes
+ *  <TABLE border="0">
+ *     <TR><TD class="indexkey" width=160> Lane ID</TD><TD class="indexkey">Lane group</TD><TD class="indexkey">Pin</TD></TR>
+ *     <TR><TD class="indexvalue" > 0 </TD><TD class="indexvalue">SB </TD><TD class="indexvalue">P_SB_RX[P/N]/TX[P/N][0]</TD></TR>
+ *     <TR><TD class="indexvalue" > 1 </TD><TD class="indexvalue">SB </TD><TD class="indexvalue">P_SB_RX[P/N]/TX[P/N][1]</TD></TR>
+ *     <TR><TD class="indexvalue" > 2 </TD><TD class="indexvalue">SB </TD><TD class="indexvalue">P_SB_RX[P/N]/TX[P/N][2]</TD></TR>
+ *     <TR><TD class="indexvalue" > 3 </TD><TD class="indexvalue">SB </TD><TD class="indexvalue">P_SB_RX[P/N]/TX[P/N][3]</TD></TR>
+ *     <TR><TD class="indexvalue" > 4 </TD><TD class="indexvalue">GPP</TD><TD class="indexvalue">P_GPP_RX[P/N]/TX[P/N][0]</TD></TR>
+ *     <TR><TD class="indexvalue" > 5 </TD><TD class="indexvalue">GPP</TD><TD class="indexvalue">P_GPP_RX[P/N]/TX[P/N][1]</TD></TR>
+ *     <TR><TD class="indexvalue" > 6 </TD><TD class="indexvalue">GPP</TD><TD class="indexvalue">P_GPP_RX[P/N]/TX[P/N][2]</TD></TR>
+ *     <TR><TD class="indexvalue" > 7 </TD><TD class="indexvalue">GPP</TD><TD class="indexvalue">P_GPP_RX[P/N]/TX[P/N][3]</TD></TR>
+ *     <TR><TD class="indexvalue" > 8 </TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][0]</TD></TR>
+ *     <TR><TD class="indexvalue" > 9 </TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][1]</TD></TR>
+ *     <TR><TD class="indexvalue" > 10</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][2]</TD></TR>
+ *     <TR><TD class="indexvalue" > 11</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][3]</TD></TR>
+ *     <TR><TD class="indexvalue" > 12</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][4]</TD></TR>
+ *     <TR><TD class="indexvalue" > 13</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][5]</TD></TR>
+ *     <TR><TD class="indexvalue" > 14</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][6]</TD></TR>
+ *     <TR><TD class="indexvalue" > 15</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][7]</TD></TR>
+ *     <TR><TD class="indexvalue" > 16</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][8]</TD></TR>
+ *     <TR><TD class="indexvalue" > 17</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][9]</TD></TR>
+ *     <TR><TD class="indexvalue" > 18</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][10]</TD></TR>
+ *     <TR><TD class="indexvalue" > 19</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][11]</TD></TR>
+ *     <TR><TD class="indexvalue" > 20</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][12]</TD></TR>
+ *     <TR><TD class="indexvalue" > 21</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][13]</TD></TR>
+ *     <TR><TD class="indexvalue" > 22</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][14]</TD></TR>
+ *     <TR><TD class="indexvalue" > 23</TD><TD class="indexvalue">GFX</TD><TD class="indexvalue">P_GFX_RX[P/N]/TX[P/N][15]</TD></TR>
+ *     <TR><TD class="indexvalue" > 24</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP1_TXP/N[0]</TD></TR>
+ *     <TR><TD class="indexvalue" > 25</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP1_TXP/N[1]</TD></TR>
+ *     <TR><TD class="indexvalue" > 26</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP1_TXP/N[2]</TD></TR>
+ *     <TR><TD class="indexvalue" > 27</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP1_TXP/N[3]</TD></TR>
+ *     <TR><TD class="indexvalue" > 28</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP0_TXP/N[0]</TD></TR>
+ *     <TR><TD class="indexvalue" > 29</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP0_TXP/N[1]</TD></TR>
+ *     <TR><TD class="indexvalue" > 30</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP0_TXP/N[2]</TD></TR>
+ *     <TR><TD class="indexvalue" > 31</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP0_TXP/N[3]</TD></TR>
+ *  </TABLE>
+ *
+ */
+
+
+/**
+ *  @page F14ONPcieLaneDescription Family 0x14(ON) PCIe/DDI Lanes
+ *  <TABLE border="0">
+ *     <TR><TD class="indexkey" width=160> Lane ID</TD><TD class="indexkey">Lane group</TD><TD class="indexkey">Pin</TD></TR>
+ *     <TR><TD class="indexvalue" > 0 </TD><TD class="indexvalue">SB </TD><TD class="indexvalue">P_SB_RX[P/N]/TX[P/N][0]</TD></TR>
+ *     <TR><TD class="indexvalue" > 1 </TD><TD class="indexvalue">SB </TD><TD class="indexvalue">P_SB_RX[P/N]/TX[P/N][1]</TD></TR>
+ *     <TR><TD class="indexvalue" > 2 </TD><TD class="indexvalue">SB </TD><TD class="indexvalue">P_SB_RX[P/N]/TX[P/N][2]</TD></TR>
+ *     <TR><TD class="indexvalue" > 3 </TD><TD class="indexvalue">SB </TD><TD class="indexvalue">P_SB_RX[P/N]/TX[P/N][3]</TD></TR>
+ *     <TR><TD class="indexvalue" > 4 </TD><TD class="indexvalue">GPP</TD><TD class="indexvalue">P_GPP_RX[P/N]/TX[P/N][0]</TD></TR>
+ *     <TR><TD class="indexvalue" > 5 </TD><TD class="indexvalue">GPP</TD><TD class="indexvalue">P_GPP_RX[P/N]/TX[P/N][1]</TD></TR>
+ *     <TR><TD class="indexvalue" > 6 </TD><TD class="indexvalue">GPP</TD><TD class="indexvalue">P_GPP_RX[P/N]/TX[P/N][2]</TD></TR>
+ *     <TR><TD class="indexvalue" > 7 </TD><TD class="indexvalue">GPP</TD><TD class="indexvalue">P_GPP_RX[P/N]/TX[P/N][3]</TD></TR>
+ *     <TR><TD class="indexvalue" > 8</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP0_TXP/N[0]</TD></TR>
+ *     <TR><TD class="indexvalue" > 9</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP0_TXP/N[1]</TD></TR>
+ *     <TR><TD class="indexvalue" > 10</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP0_TXP/N[2]</TD></TR>
+ *     <TR><TD class="indexvalue" > 11</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP0_TXP/N[3]</TD></TR>
+ *     <TR><TD class="indexvalue" > 12</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP1_TXP/N[0]</TD></TR>
+ *     <TR><TD class="indexvalue" > 13</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP1_TXP/N[1]</TD></TR>
+ *     <TR><TD class="indexvalue" > 14</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP1_TXP/N[2]</TD></TR>
+ *     <TR><TD class="indexvalue" > 15</TD><TD class="indexvalue">DDI</TD><TD class="indexvalue">DP1_TXP/N[3]</TD></TR>
+ *  </TABLE>
+ *
+ */
+
+
+/**
+ *  @page F12DualLinkDviDescription Family 0x12 Dual Link DVI connector description
+ *  Examples of various Dual Link DVI descriptors.
+ *  @code
+ *  // Dual Link DVI on dedicated display lanes. DP1_TXP/N[0]..DP1_TXP/N[3] - master, DP0_TXP/N[0]..DP0_TXP/N[3] - slave.
+ *  PCIe_PORT_DESCRIPTOR DdiList [] = {
+ *    {
+ *      DESCRIPTOR_TERMINATE_LIST,   //Descriptor flags
+ *      PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 32),
+ *      PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDualLinkDvi, Aux1, Hdp1, 0)
+ *    }
+ *  }
+ * // Dual Link DVI on dedicated display lanes. DP0_TXP/N[0]..DP0_TXP/N[3] - master, DP1_TXP/N[0]..DP1_TXP/N[3] - slave.
+ *  PCIe_PORT_DESCRIPTOR DdiList [] = {
+ *    {
+ *      DESCRIPTOR_TERMINATE_LIST,   //Descriptor flags
+ *      PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 32, 24),
+ *      PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDualLinkDvi, Aux1, Hdp1, 0)
+ *    }
+ *  }
+ * // Dual Link DVI on PCIe lanes. P_GFX_TXP/N[0]..P_GFX_TXP/N[3] - master, P_GFX_TXP/N[4]..P_GFX_TXP/N[7] - slave.
+ *  PCIe_PORT_DESCRIPTOR DdiList [] = {
+ *    {
+ *      DESCRIPTOR_TERMINATE_LIST,   //Descriptor flags
+ *      PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 15),
+ *      PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDualLinkDvi, Aux1, Hdp1, 0)
+ *    }
+ *  }
+ * // Dual Link DVI on PCIe lanes. P_GFX_TXP/N[7]..P_GFX_TXP/N[4] - master, P_GFX_TXP/N[0]..P_GFX_TXP/N[3] - slave.
+ *  PCIe_PORT_DESCRIPTOR DdiList [] = {
+ *    {
+ *      DESCRIPTOR_TERMINATE_LIST,   //Descriptor flags
+ *      PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 15, 8),
+ *      PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDualLinkDvi, Aux1, Hdp1, 0)
+ *    }
+ *  }
+ * // Dual Link DVI on PCIe lanes. P_GFX_TXP/N[8]..P_GFX_TXP/N[11] - master, P_GFX_TXP/N[12]..P_GFX_TXP/N[15] - slave.
+ *  PCIe_PORT_DESCRIPTOR DdiList [] = {
+ *    {
+ *      DESCRIPTOR_TERMINATE_LIST,   //Descriptor flags
+ *      PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 23),
+ *      PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDualLinkDvi, Aux1, Hdp1, 0)
+ *    }
+ *  }
+ * // Dual Link DVI on PCIe lanes. P_GFX_TXP/N[12]..P_GFX_TXP/N[15] - master, P_GFX_TXP/N[8]..P_GFX_TXP/N[11] - slave.
+ *  PCIe_PORT_DESCRIPTOR DdiList [] = {
+ *    {
+ *      DESCRIPTOR_TERMINATE_LIST,   //Descriptor flags
+ *      PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 23, 16),
+ *      PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDualLinkDvi, Aux1, Hdp1, 0)
+ *    }
+ *  }
+ * @endcode
+ */
+
+/**
+ * @page F12LaneConfigurations Family 0x12 PCIe port/DDI link configurations
+ * <div class=WordSection1>
+ *
+ * <p class=MsoNormal><span style='font-size:14.0pt;line-height:115%'>PCIe port
+ * configurations for lane 8 through 23. </span></p>
+ *
+ * <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0
+ *  style='border-collapse:collapse;border:none'>
+ *  <tr>
+ *   <td width=167 valign=top style='width:125.25pt;border:solid windowtext 1.5pt;
+ *   background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Configuration</p>
+ *   </td>
+ *   <td width=132 valign=top style='width:99.0pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>PCIe Port Device Number</p>
+ *   </td>
+ *   <td width=180 valign=top style='width:135.0pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Start Lane (Start Lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>End Line (End lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=167 rowspan=29 valign=top style='width:125.25pt;border-top:none;
+ *   border-left:solid windowtext 1.5pt;border-bottom:solid black 1.0pt;
+ *   border-right:solid windowtext 1.5pt;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Config A*</p>
+ *   </td>
+ *   <td width=132 rowspan=15 valign=top style='width:99.0pt;border-top:none;
+ *   border-left:none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>2</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>&nbsp;</p>
+ *   </td>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8(23)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>23(8)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8(15)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>15(8)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8(11)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>11(8)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8(9)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>9(8)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>10(11)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>11(10)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>12(15)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>15(12)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>12(13)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>13(12)</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:15.25pt'>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:15.25pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>14(15)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:15.25pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>15(14)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>16(23)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>23(16)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>16(19)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>19(16)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>16(17)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>17(16)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>18(19)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>19(18)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>20(23)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>23(20)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>20(21)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>21(20)</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:15.25pt'>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:15.25pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>22(23)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:15.25pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>23(22)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=132 rowspan=14 valign=top style='width:99.0pt;border-top:none;
+ *   border-left:none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>3</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>&nbsp;</p>
+ *   </td>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8(15)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>15(8)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8(11)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>11(8)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8(9)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>9(8)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>10(11)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>11(10)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>12(15)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>15(12)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>12(13)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>13(12)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>14(15)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>15(14)</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:15.25pt'>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:15.25pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>16(23)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:15.25pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>23(16)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>16(19)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>19(16)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>16(17)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>17(16)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>18(19)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>19(18)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>20(23)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>23(20)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>20(21)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>21(20)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=180 valign=top style='width:135.0pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>22(23)</p>
+ *   </td>
+ *   <td width=162 valign=top style='width:121.5pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>23(22)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=641 colspan=4 valign=top style='width:480.75pt;border:solid windowtext 1.5pt;
+ *   border-top:none;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>* Lanes selection for port 2/3 should not overlap in port configuration</p>
+ *   </td>
+ *  </tr>
+ * </table>
+ *
+ * <p class=MsoNormal>&nbsp;</p>
+ *
+ * <p class=MsoNormal><span style='font-size:14.0pt;line-height:115%'>PCIe port
+ * configurations for lane 4 through 7.</span></p>
+ *
+ * <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0
+ *  style='border-collapse:collapse;border:none'>
+ *  <tr>
+ *   <td width=167 valign=top style='width:125.0pt;border:solid windowtext 1.5pt;
+ *   background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Configuration</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>PCIe Port Device Number</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Start Lane (Start Lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>End Line (End lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=167 rowspan=3 valign=top style='width:125.0pt;border:solid windowtext 1.5pt;
+ *   border-top:none;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config A</p>
+ *   </td>
+ *   <td width=135 rowspan=3 valign=top style='width:100.9pt;border-top:none;
+ *   border-left:none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4(7)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7(4)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4(5)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5(4)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=167 rowspan=4 valign=top style='width:125.0pt;border-top:none;
+ *   border-left:solid windowtext 1.5pt;border-bottom:solid black 1.0pt;
+ *   border-right:solid windowtext 1.5pt;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config B</p>
+ *   </td>
+ *   <td width=135 rowspan=2 valign=top style='width:100.9pt;border-top:none;
+ *   border-left:none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4(5)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5(4)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 rowspan=2 valign=top style='width:100.9pt;border-top:none;
+ *   border-left:none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5 or 6</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6(7)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7(6)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=167 rowspan=4 valign=top style='width:125.0pt;border-top:none;
+ *   border-left:solid windowtext 1.5pt;border-bottom:solid black 1.0pt;
+ *   border-right:solid windowtext 1.5pt;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config C</p>
+ *   </td>
+ *   <td width=135 rowspan=2 valign=top style='width:100.9pt;border-top:none;
+ *   border-left:none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4(5)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5(4)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5 or 6</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6 or 7</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=167 rowspan=4 valign=top style='width:125.0pt;border:solid windowtext 1.5pt;
+ *   border-top:none;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config D</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7</p>
+ *   </td>
+ *  </tr>
+ * </table>
+ *
+ * <p class=MsoNormal>&nbsp;</p>
+ *
+ * <p class=MsoNormal><span style='font-size:14.0pt;line-height:115%'>DDI link
+ * configurations for lanes 24 through 31.</span></p>
+ *
+ * <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0
+ *  style='border-collapse:collapse;border:none'>
+ *  <tr>
+ *   <td width=167 valign=top style='width:125.0pt;border:solid windowtext 1.5pt;
+ *   background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Configuration</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Connector type</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Start Lane (Start Lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>End Line (End lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:28.35pt'>
+ *   <td width=167 valign=top style='width:125.0pt;border-top:none;border-left:
+ *   solid windowtext 1.5pt;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:28.35pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config A</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:28.35pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Dual Link DVI-D</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:28.35pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>24(31)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:28.35pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>31(24)</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=167 rowspan=2 valign=top style='width:125.0pt;border:solid windowtext 1.5pt;
+ *   border-top:none;padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config B</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT </p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>24</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>27</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>28</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>31</p>
+ *   </td>
+ *  </tr>
+ * </table>
+ *
+ * <p class=MsoNormal>&nbsp;</p>
+ *
+ * <p class=MsoNormal><span style='font-size:14.0pt;line-height:115%'>DDI link
+ * configurations for lanes 8 through 23.</span></p>
+ *
+ * <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0
+ *  style='border-collapse:collapse;border:none'>
+ *  <tr>
+ *   <td width=167 valign=top style='width:125.0pt;border:solid windowtext 1.5pt;
+ *   background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Configuration</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Connector type</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Start Lane (Start Lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>End Line (End lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:17.85pt'>
+ *   <td width=167 rowspan=2 valign=top style='width:125.0pt;border-top:none;
+ *   border-left:solid windowtext 1.5pt;border-bottom:solid black 1.0pt;
+ *   border-right:solid windowtext 1.5pt;padding:0in 5.4pt 0in 5.4pt;height:17.85pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config A</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:17.85pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Dual Link DVI-D</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:17.85pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8(15)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:17.85pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>15(8)</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:16.5pt'>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:16.5pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Dual Link DVI-D</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:16.5pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>16(23)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:16.5pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>23(16)</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:16.5pt'>
+ *   <td width=167 rowspan=3 valign=top style='width:125.0pt;border-top:none;
+ *   border-left:solid windowtext 1.5pt;border-bottom:solid black 1.0pt;
+ *   border-right:solid windowtext 1.5pt;padding:0in 5.4pt 0in 5.4pt;height:16.5pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config B</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:16.5pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Dual Link DVI-D</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:16.5pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8(15)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:16.5pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>15(8)</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>16</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>19</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>20</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>23</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:93.0pt'>
+ *   <td width=167 rowspan=3 valign=top style='width:125.0pt;border-top:none;
+ *   border-left:solid windowtext 1.5pt;border-bottom:solid black 1.0pt;
+ *   border-right:solid windowtext 1.5pt;padding:0in 5.4pt 0in 5.4pt;height:93.0pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config C</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:93.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:93.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:93.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>11</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>12</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>15</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:18.3pt'>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:18.3pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Dual Link DVI-D</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:18.3pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>16(23)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:18.3pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>23(16)</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=167 rowspan=4 valign=top style='width:125.0pt;border:solid windowtext 1.5pt;
+ *   border-top:none;padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config D</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT </p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>11</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>12</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>15</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT </p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>16</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>19</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>20</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>23</p>
+ *   </td>
+ *  </tr>
+ * </table>
+ *
+ * <p class=MsoNormal>&nbsp;</p>
+ *  </div>
+ */
+
+/**
+ * @page F14ONLaneConfigurations Family 0x14(ON) PCIe port/DDI link configurations
+ * <div class=WordSection1>
+ * <p class=MsoNormal><span style='font-size:14.0pt;line-height:115%'>PCIe port
+ * configurations for lane 4 through 7.</span></p>
+ *
+ * <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0
+ *  style='border-collapse:collapse;border:none'>
+ *  <tr>
+ *   <td width=167 valign=top style='width:125.0pt;border:solid windowtext 1.5pt;
+ *   background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Configuration</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>PCIe Port Device Number</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Start Lane (Start Lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>End Line (End lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=167 rowspan=3 valign=top style='width:125.0pt;border:solid windowtext 1.5pt;
+ *   border-top:none;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config A</p>
+ *   </td>
+ *   <td width=135 rowspan=3 valign=top style='width:100.9pt;border-top:none;
+ *   border-left:none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4(7)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7(4)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4(5)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5(4)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=167 rowspan=4 valign=top style='width:125.0pt;border-top:none;
+ *   border-left:solid windowtext 1.5pt;border-bottom:solid black 1.0pt;
+ *   border-right:solid windowtext 1.5pt;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config B</p>
+ *   </td>
+ *   <td width=135 rowspan=2 valign=top style='width:100.9pt;border-top:none;
+ *   border-left:none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4(5)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5(4)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 rowspan=2 valign=top style='width:100.9pt;border-top:none;
+ *   border-left:none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5 or 6</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6(7)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7(6)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=167 rowspan=4 valign=top style='width:125.0pt;border-top:none;
+ *   border-left:solid windowtext 1.5pt;border-bottom:solid black 1.0pt;
+ *   border-right:solid windowtext 1.5pt;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config C</p>
+ *   </td>
+ *   <td width=135 rowspan=2 valign=top style='width:100.9pt;border-top:none;
+ *   border-left:none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4(5)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5(4)</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5 or 6</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6 or 7</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=167 rowspan=4 valign=top style='width:125.0pt;border:solid windowtext 1.5pt;
+ *   border-top:none;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config D</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>4</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>5</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>6</p>
+ *   </td>
+ *  </tr>
+ *  <tr>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>7</p>
+ *   </td>
+ *  </tr>
+ * </table>
+ *
+ * <p class=MsoNormal>&nbsp;</p>
+ *
+ * <p class=MsoNormal><span style='font-size:14.0pt;line-height:115%'>CRT/DDI link
+ * configurations for lanes 8 through 19.</span></p>
+ *
+ * <table class=MsoTableGrid border=1 cellspacing=0 cellpadding=0
+ *  style='border-collapse:collapse;border:none'>
+ *  <tr>
+ *   <td width=167 valign=top style='width:125.0pt;border:solid windowtext 1.5pt;
+ *   background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Configuration</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Connector type</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Start Lane (Start Lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border:solid windowtext 1.5pt;
+ *   border-left:none;background:#C6D9F1;padding:0in 5.4pt 0in 5.4pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>End Line (End lane in reverse
+ *   configuration)</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=167 rowspan=3 valign=top style='width:125.0pt;border-top:none;
+ *   border-left:solid windowtext 1.5pt;border-bottom:solid black 1.0pt;
+ *   border-right:solid windowtext 1.5pt;padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>Config A</p>
+ *   </td>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-I*</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT </p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>8</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid black 1.0pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>11</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>HDMI</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-D</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Single Link DVI-I*</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>DP </p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>eDP</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-CRT</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Travis DP-to-LVDS</p>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>Hudson2 DP-to-CRT</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>12</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>15</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:95.0pt'>
+ *   <td width=135 valign=top style='width:100.9pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>CRT*</p>
+ *   </td>
+ *   <td width=179 valign=top style='width:134.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>16</p>
+ *   </td>
+ *   <td width=158 valign=top style='width:118.45pt;border-top:none;border-left:
+ *   none;border-bottom:solid windowtext 1.5pt;border-right:solid windowtext 1.5pt;
+ *   padding:0in 5.4pt 0in 5.4pt;height:95.0pt'>
+ *   <p class=MsoNormal align=center style='margin-bottom:0in;margin-bottom:.0001pt;
+ *   text-align:center;line-height:normal'>19</p>
+ *   </td>
+ *  </tr>
+ *  <tr style='height:35.85pt'>
+ *   <td width=638 colspan=4 valign=top style='width:6.65in;border:solid windowtext 1.5pt;
+ *   border-top:none;padding:0in 5.4pt 0in 5.4pt;height:35.85pt'>
+ *   <p class=MsoNormal style='margin-bottom:0in;margin-bottom:.0001pt;line-height:
+ *   normal'>* - Only one connector of this time can exist in configuration</p>
+ *   </td>
+ *  </tr>
+ * </table>
+ *
+ * <p class=MsoNormal>&nbsp;</p>
+ *
+ * <p class=MsoNormal>&nbsp;</p>
+ *
+ * </div>
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Include/Ids.h b/src/vendorcode/amd/agesa/f15/Include/Ids.h
new file mode 100644
index 0000000000..b8d50919be
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/Ids.h
@@ -0,0 +1,1178 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD IDS Routines
+ *
+ * Contains AMD AGESA Integrated Debug Macros
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  IDS
+ * @e \$Revision: 55079 $   @e \$Date: 2011-06-16 03:48:27 -0600 (Thu, 16 Jun 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+  /* Macros to aid debugging */
+  /* These definitions expand to zero (0) bytes of code when disabled */
+
+#ifndef _IDS_H_
+#define _IDS_H_
+
+#undef FALSE
+#undef TRUE
+#define FALSE 0
+#define TRUE  1
+// Proto type for optionsids.h
+typedef UINT32 IDS_STATUS;  ///< Status of IDS function.
+#define IDS_SUCCESS         ((IDS_STATUS) 0x00000000) ///< IDS Function is Successful.
+#define IDS_UNSUPPORTED     ((IDS_STATUS) 0xFFFFFFFF) ///< IDS Function is not existed.
+
+#define IDS_STRINGIZE(a) #a ///< for define stringize macro
+#ifndef IDS_DEADLOOP
+  #define IDS_DEADLOOP()    { volatile UINTN __i; __i = 1; while (__i); }
+#endif
+/**
+ *  IDS Option Hook Points
+ *
+ *  These are the values to indicate hook point in AGESA for IDS Options.
+ *
+ */
+typedef enum {                        //vv- for debug reference only
+  IDS_INIT_EARLY_BEFORE,              ///< 00 Option Hook Point before AGESA function AMD_INIT_EARLY.
+                                          ///<   IDS Object is initialized.
+                                          ///<   Override CPU Core Leveling Mode.
+                                          ///<   Set P-State in Post
+  IDS_INIT_EARLY_AFTER,               ///< 01 Option Hook Point after AGESA function AMD_INIT_EARLY.
+  IDS_INIT_LATE_BEFORE,               ///< 02 Option Hook Point before AGESA function AMD_INIT_LATE.
+                                          ///< It will be used to control the following tables.
+                                          ///<   ACPI P-State Table (_PSS, XPSS, _PCT, _PSD, _PPC)
+                                          ///<   ACPI SRAT Table
+                                          ///<   ACPI SLIT Table
+                                          ///<   ACPI WHEA Table
+                                          ///<   DMI Table
+  IDS_INIT_LATE_AFTER,                ///< 03 Option Hook Point after AGESA function AMD_INIT_LATE.
+  IDS_INIT_MID_BEFORE,                ///< 04 Option Hook Point before AGESA function AMD_INIT_MID.
+  IDS_INIT_MID_AFTER,                 ///< 05 Option Hook Point after AGESA function AMD_INIT_MID.
+  IDS_INIT_POST_BEFORE,               ///< 06 Option Hook Point before AGESA function AMD_INIT_POST.
+                                          ///<   Control Interleaving and DRAM memory hole
+                                          ///<   Override the setting of ECC Control
+                                          ///<   Override the setting of Online Spare Rank
+  IDS_INIT_POST_AFTER,                ///< 07 Option Hook Point after AGESA function AMD_INIT_POST.
+  IDS_INIT_RESET_BEFORE,              ///< 08 Option Hook Point before AGESA function AMD_INIT_RESET.
+  IDS_INIT_RESET_AFTER,               ///< 09 Option Hook Point after AGESA function AMD_INIT_RESET.
+  IDS_INIT_POST_MID,                  ///< 0a Option Hook Point after AGESA function AMD_INIT_POST.
+  IDS_BEFORE_S3_SAVE,                 ///< 0b override any settings before S3 save.
+  IDS_BEFORE_S3_RESTORE,              ///< 0c  override any settings before S3 restore
+  IDS_AFTER_S3_SAVE,                  ///< 0d Override any settings after S3 save
+  IDS_AFTER_S3_RESTORE,               ///< 0e Override any settings after S3 restore
+  IDS_BEFORE_DQS_TRAINING,            ///< 0f override any settings before DQS training
+  IDS_BEFORE_DRAM_INIT,               ///< 10 override any settings before Dram initialization
+  IDS_BEFORE_MEM_FREQ_CHG,            ///< 11 override settings before MemClk frequency change
+  IDS_BEFORE_WARM_RESET ,             ///< 12 Override PCI or MSR Registers Before Warm Reset
+  IDS_BEFORE_PCI_INIT,                ///< 13 Override PCI or MSR Registers Before PCI Init
+  IDS_BEFORE_AP_EARLY_HALT,           ///< 14 Option Hook Point before AP early halt
+  IDS_BEFORE_S3_RESUME,               ///< 15 Option Hook Point before s3 resume
+  IDS_AFTER_S3_RESUME,                ///< 16 Option Hook Point after s3 resume
+  IDS_BEFORE_PM_INIT,                 ///< 17 Option Hook Point Before Pm Init
+
+  IDS_MT_BASE = 0x20,                 ///< 0x20 ~ 0x38 24 time points reserved for MTTime
+
+  IDS_PLATFORM_RSVD1 = 0x38,          ///< from 0x38 to 0x3f will reserved for platform used
+  IDS_PLATFORM_RSVD2 = 0x39,          ///< from 0x38 to 0x3f will reserved for platform used
+  IDS_PLATFORM_RSVD3 = 0x3a,          ///< from 0x38 to 0x3f will reserved for platform used
+  IDS_PLATFORM_RSVD4 = 0x3b,          ///< from 0x38 to 0x3f will reserved for platform used
+  IDS_PLATFORM_RSVD5 = 0x3c,          ///< from 0x38 to 0x3f will reserved for platform used
+  IDS_PLATFORM_RSVD6 = 0x3d,          ///< from 0x38 to 0x3f will reserved for platform used
+  IDS_PLATFORM_RSVD7 = 0x3e,          ///< from 0x38 to 0x3f will reserved for platform used
+  IDS_PLATFORM_RSVD8 = 0x3f,          ///< from 0x38 to 0x3f will reserved for platform used
+
+  // All the above timing point is used by BVM, their value should never be changed
+  IDS_HT_CONTROL,                     ///< 40 Override the setting of HT Link Control
+  IDS_HT_TRISTATE,                    ///< 41 Enable or Disable HT Tri-state during an LDTSTP#
+  IDS_INIT_DRAM_TABLE,                ///< 42 Generate override table for Dram Timing
+                                          ///< Dram Controller, Drive Strength and DQS Timing
+  IDS_GET_DRAM_TABLE,                 ///< 43 Generate override table for Dram Timing
+  IDS_GANGING_MODE,                   ///< 44 override Memory Mode Unganged
+  IDS_POWERDOWN_MODE,                 ///< 45 override Power Down Mode
+  IDS_BURST_LENGTH32,                 ///< 46 override Burst Length32
+  IDS_ALL_MEMORY_CLOCK,               ///< 47 override All Memory Clks Enable
+  IDS_ECC,                            ///< 48 override ECC parameter
+  IDS_ECCSYMBOLSIZE,                  ///< 49 override ECC symbol size
+  IDS_CPU_Early_Override,             ///< 4a override CPU early parameter
+  IDS_CACHE_FLUSH_HLT,                ///< 4b override Cache Flush Hlt
+  IDS_CHANNEL_INTERLEAVE,             ///< 4c override Channel Interleave
+  IDS_MEM_ERROR_RECOVERY,             ///< 4d override memory error recovery
+  IDS_MEM_RETRAIN_TIMES,              ///< 4e override memory retrain times
+  IDS_MEM_SIZE_OVERLAY,               ///< 4f Override the syslimit
+  IDS_HT_ASSIST,                      ///< 50 Override Probe Filter
+  IDS_CHECK_NEGATIVE_WL,              ///< 51 Check for negative write leveling result
+  IDS_DLL_SHUT_DOWN,                  ///< 52 Check for Dll Shut Down
+  IDS_POR_MEM_FREQ,                   ///< 53 Entry to enable/disable MemClk frequency enforcement
+  IDS_PHY_DLL_STANDBY_CTRL,           ///< 54 Enable/Disable Phy DLL standby feature
+  IDS_PLATFORMCFG_OVERRIDE,           ///< 55 Hook for Override PlatformConfig structure
+  IDS_LOADCARD_ERROR_RECOVERY,        ///< 56 Special error handling for load card support
+  IDS_MEM_IGNORE_ERROR,               ///< 57 Ignore error and do not do fatal exit in memory
+  IDS_GNB_SMU_SERVICE_CONFIG,         ///< 58 Config GNB SMU service
+  IDS_GNB_ORBDYNAMIC_WAKE,            ///< 59 config GNB dynamic wake
+  IDS_GNB_PLATFORMCFG_OVERRIDE,       ///< 5a override ids gnb platform config
+  IDS_GNB_LCLK_DPM_EN,                ///< 5b override GNB LCLK DPM configuration
+  IDS_GNB_LCLK_DEEP_SLEEP,            ///< 5c override GNB LCLK DPM deep sleep
+  IDS_GNB_CLOCK_GATING,               ///< 5d Override GNB Clock gating config
+  IDS_NB_PSTATE_DIDVID,               ///< 5e Override NB P-state settings
+  IDS_CPB_CTRL,                       ///< 5f Config the Core peformance boost feature
+  IDS_HTC_CTRL,                       ///< 60 Hook for Hardware Thermal Control
+  IDS_CC6_WORKAROUND,                 ///< 61 Hook for skip CC6 work around
+  IDS_MEM_MR0,                        ///< 62 Hook for override Memory Mr0 register
+  IDS_REG_TABLE,                      ///< 63 Hook for add IDS register table to the loop
+  IDS_NBBUFFERALLOCATIONATEARLY,      ///< 64 Hook for override North bridge bufer allocation
+  IDS_BEFORE_S3_SPECIAL,              ///< 65 Hook to bypass S3 special functions
+  IDS_SET_PCI_REGISTER_ENTRY,         ///< 66 Hook to SetRegisterForPciEntry
+  IDS_ERRATUM463_WORKAROUND,          ///< 67 Hook to Erratum 463 workaround
+  IDS_BEFORE_MEMCLR,                  ///< 68 Hook before set Memclr bit
+  IDS_OVERRIDE_IO_CSTATE,             ///< 69 Hook for override io C-state setting
+  IDS_NBPSDIS_OVERRIDE,               ///< 6a Hook for override NB pstate disable setting
+  IDS_NBPS_REG_OVERRIDE,              ///< 6b Hook for override Memory NBps reg
+  IDS_LOW_POWER_PSTATE,               ///< 6c Hook for disalbe Low power_Pstates feature
+  IDS_CST_CREATE,                     ///< 6d Hook for create _CST
+  IDS_CST_SIZE,                       ///< 6e Hook for get _CST size
+  IDS_ENFORCE_VDDIO,                  ///< 6f Hook to override VDDIO
+  IDS_STRETCH_FREQUENCY_LIMIT,        ///< 70 Hook for enforcing memory stretch frequency limit
+  IDS_INIT_MEM_REG_TABLE,             ///< 71 Hook for init memory register table
+  IDS_SKIP_FUSED_MAX_RATE,            ///< 72 Hook to skip fused max rate cap
+  IDS_FCH_INIT_AT_RESET,              ///< 73 Hook for FCH reset parameter
+  IDS_FCH_INIT_AT_ENV,                ///< 74 Hook for FCH ENV parameter
+  IDS_ENFORCE_PLAT_TABLES,            ///< 75 Hook to enforce platform specific tables
+  IDS_NBPS_MIN_FREQ,                  ///< 76 Hook for override MIN nb ps freq
+  IDS_GNB_FORCE_CABLESAFE,            ///< 77 Hook for override Force Cable Safe
+  IDS_SKIP_PM_TRANSITION_STEP,        ///< 78 Hook for provide IDS ability to skip this PM step
+  IDS_GNB_PROPERTY,                   ///< 79 Hook for GNB Property
+  IDS_GNB_PCIE_POWER_GATING,          ///< 7A Hook for GNB PCIe Power Gating
+  IDS_MEM_DYN_DRAM_TERM,              ///< 7B Hook for Override Dynamic Dram Term
+  IDS_MEM_DRAM_TERM,                  ///< 7C Hook for Override Dram Term
+  IDS_TRACE_MODE,                     ///< 7D Trace Mode
+  IDS_GNB_ALTVDDNB,                   ///< 7E Hook for Override AltVddNB
+  IDS_UCODE,                          ///< 7F Enable or Disable microcode patching
+  IDS_FAM_REG_GMMX,                   ///< 80 GMMX register access
+  IDS_MEMORY_POWER_POLICY,            ///< 81 Memory power policy
+  IDS_GET_STRETCH_FREQUENCY_LIMIT,    ///< 82 Hook for enforcing memory stretch frequency limit
+  IDS_CPU_FEAT,                       ///< 83 Hook for runtime force cpu feature disable
+  IDS_OPTION_END,                     ///< 84 End of IDS option
+} AGESA_IDS_OPTION;
+
+#include "OptionsIds.h"
+#include "Filecode.h"
+
+/* Initialize IDS controls */
+#ifndef IDSOPT_IDS_ENABLED
+  #define IDSOPT_IDS_ENABLED        FALSE
+#endif
+
+#ifndef IDSOPT_CONTROL_ENABLED
+  #define IDSOPT_CONTROL_ENABLED    FALSE
+#endif
+
+#ifndef IDSOPT_CONTROL_NV_TO_CMOS
+  #define IDSOPT_CONTROL_NV_TO_CMOS FALSE
+#endif
+
+#ifndef IDSOPT_TRACING_ENABLED
+  #define IDSOPT_TRACING_ENABLED    FALSE
+#endif
+
+#ifndef IDSOPT_TRACE_USER_OPTIONS
+  #define IDSOPT_TRACE_USER_OPTIONS TRUE
+#endif
+
+#ifndef IDSOPT_PERF_ANALYSIS
+  #define IDSOPT_PERF_ANALYSIS      FALSE
+#endif
+
+#ifndef IDSOPT_HEAP_CHECKING
+  #define IDSOPT_HEAP_CHECKING           FALSE
+#endif
+
+#ifndef IDSOPT_ASSERT_ENABLED
+  #define IDSOPT_ASSERT_ENABLED         FALSE
+#endif
+
+#ifndef IDSOPT_ERROR_TRAP_ENABLED
+  #define IDSOPT_ERROR_TRAP_ENABLED   FALSE
+#endif
+
+#ifndef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+  #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED   FALSE
+#endif
+
+#ifndef IDSOPT_DEBUG_CODE_ENABLED
+  #define IDSOPT_DEBUG_CODE_ENABLED   FALSE
+#endif
+
+#ifndef IDSOPT_IDT_EXCEPTION_TRAP
+  #define IDSOPT_IDT_EXCEPTION_TRAP FALSE
+#endif
+
+#ifndef IDSOPT_C_OPTIMIZATION_DISABLED
+  #define IDSOPT_C_OPTIMIZATION_DISABLED   FALSE
+#endif
+
+#if IDSOPT_IDS_ENABLED == FALSE
+  #undef  IDSOPT_CONTROL_ENABLED
+  #undef  IDSOPT_TRACING_ENABLED
+  #undef  IDSOPT_PERF_ANALYSIS
+  #undef  IDSOPT_HEAP_CHECKING
+  #undef  IDSOPT_ASSERT_ENABLED
+  #undef  IDSOPT_ERROR_TRAP_ENABLED
+  #undef  IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+  #undef  IDSOPT_DEBUG_CODE_ENABLED
+  #undef  IDSOPT_TRACE_USER_OPTIONS
+
+  #define IDSOPT_CONTROL_ENABLED    FALSE
+  #define IDSOPT_TRACING_ENABLED    FALSE
+  #define IDSOPT_PERF_ANALYSIS      FALSE
+  #define IDSOPT_HEAP_CHECKING      FALSE
+  #define IDSOPT_ASSERT_ENABLED     FALSE
+  #define IDSOPT_ERROR_TRAP_ENABLED FALSE
+  #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE
+  #define IDSOPT_DEBUG_CODE_ENABLED FALSE
+  #define IDSOPT_TRACE_USER_OPTIONS FALSE
+#endif
+
+/**
+ *  Make a Progress Report to the User.
+ *
+ *  This Macro is always enabled. The default action is to write the TestPoint value
+ *  to an I/O port. The I/O port is 8 bits in size and the default address is 0x80.
+ *  IBVs can change AGESA's default port by defining IDS_DEBUG_PORT to desired port
+ *  in OptionsIds.h in their build tip.
+ *
+ *  @param[in]      TestPoint       The value for display indicating progress
+ *  @param[in,out]  StdHeader       Pointer of AMD_CONFIG_PARAMS
+ *
+ **/
+
+#define AGESA_TESTPOINT(TestPoint, StdHeader)
+
+#ifndef IDS_DEBUG_PORT
+  #define IDS_DEBUG_PORT  0x80
+#endif
+
+/**
+ * @def STOP_HERE
+ *  (macro) - Causes program to halt. This is @b only for use during active debugging .
+ *
+ *  Causes the program to halt and display the file number of the source of the
+ *  halt (displayed in decimal).
+ *
+ **/
+#if IDSOPT_IDS_ENABLED == TRUE
+  #ifdef STOP_CODE
+    #undef STOP_CODE
+  #endif
+  #define STOP_CODE (((UINT32)FILECODE)*0x10000 + \
+                      ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \
+                      (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000))
+  #define STOP_HERE IdsErrorStop (STOP_CODE);
+#else
+  #define STOP_HERE  STOP_HERE_Needs_To_Be_Removed //"WARNING: Debug code needs to be removed for production builds."
+#endif
+
+/**
+ * @def ASSERT
+ *  Test an assertion that the given statement is True.
+ *
+ *  The statement is evaluated to a boolean value. If the statement is True,
+ *  then no action is taken (no error). If the statement is False, a error stop
+ *  is generated to halt the program. Used for testing for fatal errors that
+ *  must be resolved before production. This is used to do parameter checks,
+ *  bounds checking, range checks and 'sanity' checks.
+ *
+ * @param[in]   conditional    Assert that evaluating this conditional results in TRUE.
+ *
+ **/
+#ifndef ASSERT
+  #if IDSOPT_ASSERT_ENABLED == TRUE
+    #ifdef STOP_CODE
+      #undef STOP_CODE
+    #endif
+    #define STOP_CODE (((UINT32)FILECODE)*0x10000 + \
+                        ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \
+                        (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000))
+
+    #define ASSERT(conditional) ((conditional) ? 0 : IdsAssert (STOP_CODE));
+  #else
+    #define ASSERT(conditional)
+  #endif
+#endif
+
+#if IDSOPT_CAR_CORRUPTION_CHECK_ENABLED == TRUE
+  #undef  IDSOPT_ERROR_TRAP_ENABLED
+  #define IDSOPT_ERROR_TRAP_ENABLED TRUE
+  #define IDS_CAR_CORRUPTION_CHECK(StdHeader)
+#else
+  #define IDS_CAR_CORRUPTION_CHECK(StdHeader)
+#endif
+
+#ifndef DEBUG_CODE
+  #if IDSOPT_DEBUG_CODE_ENABLED == TRUE
+    #define  DEBUG_CODE(Code)
+  #else
+    #define  DEBUG_CODE(Code)
+  #endif
+#endif
+
+/**
+ * @def IDS_ERROR_TRAP
+ * Trap AGESA Error events with stop code display.
+ *
+ * Works similarly to use of "ASSERT (FALSE);"
+ *
+ */
+#if IDSOPT_ERROR_TRAP_ENABLED == TRUE
+  #ifdef STOP_CODE
+    #undef STOP_CODE
+  #endif
+  #define STOP_CODE (((UINT32)FILECODE)*0x10000 + \
+                      ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \
+                      (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000))
+
+  #define IDS_ERROR_TRAP  IdsErrorStop (STOP_CODE)
+#else
+  #define IDS_ERROR_TRAP
+#endif
+
+///give the extended Macro default value
+#ifndef __IDS_EXTENDED__
+  #define IDS_EXTENDED_HOOK(idsoption, dataptr, idsnvptr, stdheader) IDS_SUCCESS
+  #define IDS_INITIAL_F10_PM_STEP
+  #define IDS_INITIAL_F12_PM_STEP
+  #define IDS_INITIAL_F14_PM_STEP
+  #define IDS_INITIAL_F15_OR_PM_STEP
+  #define IDS_INITIAL_F15_TN_PM_STEP
+  #define IDS_EXTENDED_GET_DATA_EARLY(data, StdHeader)
+  #define IDS_EXTENDED_GET_DATA_LATE(data, StdHeader)
+  #define IDS_EXTENDED_HEAP_SIZE 0
+  #define IDS_EXT_INCLUDE_F10(file)
+  #define IDS_EXT_INCLUDE_F12(file)
+  #define IDS_EXT_INCLUDE_F14(file)
+  #define IDS_EXT_INCLUDE_F15(file)
+  #define IDS_EXT_INCLUDE(file)
+  #define IDS_PAD_4K
+#endif
+
+#ifndef IDS_NUM_NV_ITEM
+  #define IDS_NUM_NV_ITEM (IDS_NUM_EXT_NV_ITEM)
+#endif
+
+#define IDS_CMOS_INDEX_PORT 0x70
+#define IDS_CMOS_DATA_PORT 0x71
+#define IDS_CMOS_REGION_START 0x20
+#define IDS_CMOS_REGION_END 0x7F
+#define IDS_AP_GET_NV_FROM_CMOS(x) FALSE
+
+#if IDSOPT_CONTROL_ENABLED == TRUE
+  #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader)
+
+  #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader)
+  #if IDSOPT_CONTROL_NV_TO_CMOS == TRUE
+    #undef IDS_AP_GET_NV_FROM_CMOS
+    #define IDS_AP_GET_NV_FROM_CMOS(x)
+    #ifdef IDS_OPT_CMOS_INDEX_PORT
+      #undef IDS_CMOS_INDEX_PORT
+      #define IDS_CMOS_INDEX_PORT IDS_OPT_CMOS_INDEX_PORT
+    #endif
+
+    #ifdef IDS_OPT_CMOS_DATA_PORT
+      #undef IDS_CMOS_DATA_PORT
+      #define IDS_CMOS_DATA_PORT IDS_OPT_CMOS_DATA_PORT
+    #endif
+
+    #ifdef IDS_OPT_CMOS_REGION_START
+      #undef IDS_CMOS_REGION_START
+      #define IDS_CMOS_REGION_START IDS_OPT_CMOS_REGION_START
+    #endif
+
+    #ifdef IDS_OPT_CMOS_REGION_END
+      #undef IDS_CMOS_REGION_END
+      #define IDS_CMOS_REGION_END IDS_OPT_CMOS_REGION_END
+    #endif
+  #endif
+#else
+  #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader)
+
+  #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) AGESA_SUCCESS
+#endif
+
+/**
+ *  Macro to add a *skip* hook for IDS options
+ *
+ *  The default minimal action is to do nothing and there is no any code to increase.
+ *  For debug environments, IDS dispatcher function will be called to perform
+ *  the detailed action and to skip AGESA code if necessary.
+ *
+ * @param[in]       IdsOption       IDS Option ID for this hook point
+ * @param[in, out]  DataPtr         Data Pointer to override
+ * @param[in, out]  StdHeader       Pointer of AMD_CONFIG_PARAMS
+ *
+ *
+ **/
+
+#if IDSOPT_CONTROL_ENABLED == TRUE
+  #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader)
+#else
+  #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader)
+#endif
+
+/**
+ *  Macro to add a heap manager routine
+ *
+ *  when memory is allocated the heap manager actually allocates two extra dwords of data,
+ *  one dword buffer before the actual memory, and one dword afterwards.
+ *  a complete heap walk and check to be performed at any time.
+ *  it would ASSERT if the heap is corrupt
+ *
+ * @param[in]  StdHeader       Pointer of AMD_CONFIG_PARAMS
+ *
+ *
+ **/
+
+// Heap debug feature
+#define SENTINEL_BEFORE_VALUE 0x64616548    // "Head"
+#define SENTINEL_AFTER_VALUE  0x6C696154    // "Tail"
+#if IDSOPT_IDS_ENABLED == TRUE
+  #if IDSOPT_HEAP_CHECKING == TRUE
+    #define SIZE_OF_SENTINEL  4
+    #define NUM_OF_SENTINEL   2             // Before ("Head") and After ("Tail")
+    #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + AlignTo16Byte) = SENTINEL_BEFORE_VALUE);
+    #define SET_SENTINEL_AFTER(NodePtr) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + NodePtr->BufferSize - SIZE_OF_SENTINEL) = SENTINEL_AFTER_VALUE);
+    #define Heap_Check(stdheader)
+  #else
+    #define SIZE_OF_SENTINEL  0
+    #define NUM_OF_SENTINEL   0
+    #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte)
+    #define SET_SENTINEL_AFTER(NodePtr)
+    #define Heap_Check(stdheader)
+  #endif
+#else
+  #define SIZE_OF_SENTINEL    0
+  #define NUM_OF_SENTINEL     0
+  #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte)
+  #define SET_SENTINEL_AFTER(NodePtr)
+  #define Heap_Check(stdheader)
+#endif
+
+/**
+ *  Macro to add IDT for debugging exception.
+ *
+ *  A debug feature. Adding a 'jmp $' into every exception handler.
+ *  So debugger could use HDT to skip 'jmp $' and execute the iret,
+ *  then they could find which instruction cause the exception.
+ *
+ * @param[in]       FunctionId      IDS Function ID for this hook point
+ * @param[in, out]  DataPtr         Data Pointer to override
+ * @param[in, out]  StdHeader       Pointer of AMD_CONFIG_PARAMS
+ *
+ *
+ **/
+#if IDSOPT_IDS_ENABLED == TRUE
+  #if IDSOPT_IDT_EXCEPTION_TRAP == TRUE
+    #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader)
+  #else
+    #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader)
+  #endif
+#else
+  #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader)
+#endif
+
+
+
+
+/**
+ *  Macro to add HDT OUT
+ *
+ *  The default minimal action is to do nothing and there is no any code to increase.
+ *  For debug environments, the debug information can be displayed in HDT or other
+ *  devices.
+ *
+ **/
+#if IDSOPT_IDS_ENABLED == TRUE
+  #if IDSOPT_TRACING_ENABLED == TRUE
+    #define IDS_HDT_CONSOLE_INIT(x)
+    #define IDS_HDT_CONSOLE_EXIT(x)
+    #define IDS_HDT_CONSOLE_S3_EXIT(x)
+    #define IDS_HDT_CONSOLE_S3_AP_EXIT(x)
+
+      #ifdef __GNUC__
+        #if CONFIG_REDIRECT_IDS_HDT_CONSOLE_TO_SERIAL
+		/* print all*/
+		//#define IDS_HDT_CONSOLE(f, s, args...) do {do_printk(BIOS_DEBUG, s, ##args);} while (0)
+		#define IDS_HDT_CONSOLE(f, s, args...) do {\
+			if (f == MAIN_FLOW) {\
+				do_printk(BIOS_DEBUG, s, ##args);\
+			} else if (f == MEM_FLOW) {\
+				do_printk(BIOS_DEBUG, s, ##args);\
+			} else if (f == CPU_TRACE) {\
+				do_printk(BIOS_DEBUG, s, ##args);\
+			} else if (f == HT_TRACE) {\
+				do_printk(BIOS_DEBUG, s, ##args);\
+			} else if (f == GNB_TRACE) {\
+				do_printk(BIOS_DEBUG, s, ##args);\
+			} else if (f == FCH_TRACE) {\
+				do_printk(BIOS_DEBUG, s, ##args);\
+			}\
+		} while(0)
+        #else
+        #define IDS_HDT_CONSOLE(s, args...) do {} while(0)
+        #endif
+        #else
+     #define IDS_HDT_CONSOLE(s, args...)
+    #endif
+
+    #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x)
+    #define IDS_HDT_CONSOLE_ASSERT(x)
+    #define IDS_FUNCLIST_ADDR        NULL
+    #define IDS_FUNCLIST_EXTERN()
+    #define IDS_TIMEOUT_CTL(t)
+    #define IDS_HDT_CONSOLE_DEBUG_CODE(Code)
+    //#define CONSOLE(s, ...)
+  #else
+    #define IDS_HDT_CONSOLE_INIT(x)
+    #define IDS_HDT_CONSOLE_EXIT(x)
+    #define IDS_HDT_CONSOLE_S3_EXIT(x)
+    #define IDS_HDT_CONSOLE_S3_AP_EXIT(x)
+    #define IDS_HDT_CONSOLE(f, s, ...)
+    #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x)
+    #define IDS_HDT_CONSOLE_ASSERT(x)
+    #define IDS_FUNCLIST_ADDR                 NULL
+    #define IDS_FUNCLIST_EXTERN()
+    #define IDS_TIMEOUT_CTL(t)
+    #define IDS_HDT_CONSOLE_DEBUG_CODE(Code)
+    //#define CONSOLE(s, ...)        CONSOLE_Needs_To_Be_Removed_For_Production_Build //"WARNING: CONSOLE needs to be removed for production builds."
+  #endif
+#else
+  #define IDS_HDT_CONSOLE_INIT(x)
+  #define IDS_HDT_CONSOLE_EXIT(x)
+  #define IDS_HDT_CONSOLE_S3_EXIT(x)
+  #define IDS_HDT_CONSOLE_S3_AP_EXIT(x)
+  #define IDS_HDT_CONSOLE(f, s, ...)
+  #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x)
+  #define IDS_HDT_CONSOLE_ASSERT(x)
+  #define IDS_FUNCLIST_ADDR                   NULL
+  #define IDS_FUNCLIST_EXTERN()
+  #define IDS_TIMEOUT_CTL(t)
+  #define IDS_HDT_CONSOLE_DEBUG_CODE(Code)
+//  #define CONSOLE(s, ...)        CONSOLE_Needs_To_Be_Removed_For_Production_Build //"WARNING: CONSOLE needs to be removed for production builds."
+#endif
+
+#define IDS_TRACE_SHOW_BLD_OPT_CFG  IDSOPT_TRACE_USER_OPTIONS
+
+#if IDSOPT_PERF_ANALYSIS == TRUE
+  #define IDS_PERF_TIMESTAMP(StdHeader, TestPoint)
+  #define IDS_PERF_ANALYSE(StdHeader)
+  #define IDS_PERF_TIME_MEASURE(StdHeader)
+#else
+  #define IDS_PERF_TIMESTAMP(StdHeader, TestPoint)
+  #define IDS_PERF_ANALYSE(StdHeader)
+  #define IDS_PERF_TIME_MEASURE(StdHeader)
+#endif
+
+///For IDS feat use
+#define IDS_FAMILY_ALL  0xFFFFFFFFFFFFFFFFull
+#define IDS_BSP_ONLY    TRUE
+#define IDS_ALL_CORES   FALSE
+
+#define IDS_LATE_RUN_AP_TASK_ID     PROC_IDS_LIBRARY_IDSLIB_FILECODE
+
+#define IDS_CALLOUT_INIT      0x01                             ///< The function data of IDS callout function of initialization.
+
+/// Function entry for HDT script to call
+typedef struct _SCRIPT_FUNCTION {
+  UINT32  FuncAddr;       ///< Function address in ROM
+  CHAR8   FuncName[40];   ///< Function name
+} SCRIPT_FUNCTION;
+
+/// Data Structure for Mem ECC parameter override
+typedef struct {
+  IN BOOLEAN CfgEccRedirection;                   ///< ECC Redirection
+  IN UINT16  CfgScrubDramRate;                    ///< Scrub Dram Rate
+  IN UINT16  CfgScrubL2Rate;                      ///< Scrub L2Rate
+  IN UINT16  CfgScrubL3Rate;                      ///< Scrub L3Rate
+  IN UINT16  CfgScrubIcRate;                      ///< Scrub Ic Rate
+  IN UINT16  CfgScrubDcRate;                      ///< Scrub Dc Rate
+  IN BOOLEAN CfgEccSyncFlood;                     ///< ECC Sync Flood
+} ECC_OVERRIDE_STRUCT;
+
+
+
+
+/**
+ *  AGESA Test Points
+ *
+ *  These are the values displayed to the user to indicate progress through boot.
+ *  These can be used in a debug environment to stop the debugger at a specific
+ *  test point:
+ *  For SimNow!, this command
+ *      bi 81 w vb 49
+ *  will stop the debugger on one of the TracePoints (49 is the TP value in this example).
+ *
+ */
+typedef enum {
+  StartProcessorTestPoints,           ///< 00 Entry used for range testing for @b Processor related TPs
+
+  // Memory test points
+  TpProcMemBeforeMemDataInit,         ///< 01 .. Memory structure initialization (Public interface)
+  TpProcMemBeforeSpdProcessing,       ///< 02 .. SPD Data processing  (Public interface)
+  TpProcMemAmdMemAuto,                ///< 03 .. Memory configuration  (Public interface)
+  TpProcMemDramInit,                  ///< 04 .. DRAM initialization
+  TpProcMemSPDChecking,               ///< 05 ..
+  TpProcMemModeChecking,              ///< 06 ..
+  TpProcMemSpeedTclConfig,            ///< 07 .. Speed and TCL configuration
+  TpProcMemSpdTiming,                 ///< 08 ..
+  TpProcMemDramMapping,               ///< 09 ..
+  TpProcMemPlatformSpecificConfig,    ///< 0A ..
+  TPProcMemPhyCompensation,           ///< 0B ..
+  TpProcMemStartDcts,                 ///< 0C ..
+  TpProcMemBeforeDramInit,            ///< 0D .. (Public interface)
+  TpProcMemPhyFenceTraining,          ///< 0E ..
+  TpProcMemSynchronizeDcts,           ///< 0F ..
+  TpProcMemSystemMemoryMapping,       ///< 10 ..
+  TpProcMemMtrrConfiguration,         ///< 11 ..
+  TpProcMemDramTraining,              ///< 12 ..
+  TpProcMemBeforeAnyTraining,         ///< 13 .. (Public interface)
+  TpProcMemWriteLevelizationTraining, ///< 14 ..
+  TpProcMemWlFirstPass,               ///< 15 .. Below 800Mhz first pass start
+  TpProcMemWlSecondPass,              ///< 16 .. Above 800Mhz second pass start
+  TpProcMemWlTrainTargetDimm,         ///< 17 .. Target DIMM configured
+  TpProcMemWlPrepDimms,               ///< 18 ..  Prepare DIMMS for WL
+  TpProcMemWlConfigDimms,             ///< 19 ..  Configure DIMMS for WL
+  TpProcMemReceiverEnableTraining,    ///< 1A ..
+  TpProcMemRcvrStartSweep,            ///< 1B .. Start sweep loop
+  TpProcMemRcvrSetDelay,              ///< 1C .. Set receiver Delay
+  TpProcMemRcvrWritePattern,          ///< 1D .. Write test pattern
+  TpProcMemRcvrReadPattern,           ///< 1E .. Read test pattern
+  TpProcMemRcvrTestPattern,           ///< 1F .. Compare test pattern
+  TpProcMemRcvrCalcLatency,           ///< 20 .. Calculate MaxRdLatency per channel
+  TpProcMemReceiveDqsTraining,        ///< 21 ..
+  TpProcMemRcvDqsSetDelay,            ///< 22 .. Set Write Data delay
+  TpProcMemRcvDqsWritePattern,        ///< 23 .. Write test pattern
+  TpProcMemRcvDqsStartSweep,          ///< 24 .. Start read sweep
+  TpProcMemRcvDqsSetRcvDelay,         ///< 25 .. Set Receive DQS delay
+  TpProcMemRcvDqsReadPattern,         ///< 26 .. Read Test pattern
+  TpProcMemRcvDqsTstPattern,          ///< 27 .. Compare Test pattern
+  TpProcMemRcvDqsResults,             ///< 28 .. Update results
+  TpProcMemRcvDqsFindWindow,          ///< 29 .. Start Find passing window
+  TpProcMemTransmitDqsTraining,       ///< 2A ..
+  TpProcMemTxDqStartSweep,            ///< 2B .. Start write sweep
+  TpProcMemTxDqSetDelay,              ///< 2C .. Set Transmit DQ delay
+  TpProcMemTxDqWritePattern,          ///< 2D .. Write test pattern
+  TpProcMemTxDqReadPattern,           ///< 2E .. Read Test pattern
+  TpProcMemTxDqTestPattern,           ///< 2F .. Compare Test pattern
+  TpProcMemTxDqResults,               ///< 30 .. Update results
+  TpProcMemTxDqFindWindow,            ///< 31 .. Start Find passing window
+  TpProcMemMaxRdLatencyTraining,      ///< 32 ..
+  TpProcMemMaxRdLatStartSweep,        ///< 33 .. Start sweep
+  TpProcMemMaxRdLatSetDelay,          ///< 34 .. Set delay
+  TpProcMemMaxRdLatWritePattern,      ///< 35 .. Write test pattern
+  TpProcMemMaxRdLatReadPattern,       ///< 36 .. Read Test pattern
+  TpProcMemMaxRdLatTestPattern,       ///< 37 .. Compare Test pattern
+  TpProcMemOnlineSpareInit,           ///< 38 .. Online Spare init
+  TpProcMemBankInterleaveInit,        ///< 39 .. Bank Interleave Init
+  TpProcMemNodeInterleaveInit,        ///< 3A .. Node Interleave Init
+  TpProcMemChannelInterleaveInit,     ///< 3B .. Channel Interleave Init
+  TpProcMemEccInitialization,         ///< 3C .. ECC initialization
+  TpProcMemPlatformSpecificInit,      ///< 3D .. Platform Specific Init
+  TpProcMemBeforeAgesaReadSpd,        ///< 3E .. Before callout for "AgesaReadSpd"
+  TpProcMemAfterAgesaReadSpd,         ///< 3F .. After callout for "AgesaReadSpd"
+  TpProcMemBeforeAgesaHookBeforeDramInit,    ///< 40 .. Before optional callout "AgesaHookBeforeDramInit"
+  TpProcMemAfterAgesaHookBeforeDramInit,     ///< 41 .. After optional callout "AgesaHookBeforeDramInit"
+  TpProcMemBeforeAgesaHookBeforeDQSTraining, ///< 42 .. Before optional callout "AgesaHookBeforeDQSTraining"
+  TpProcMemAfterAgesaHookBeforeDQSTraining,  ///< 43 .. After optional callout "AgesaHookBeforeDQSTraining"
+  TpProcMemBeforeAgesaHookBeforeExitSelfRef, ///< 44 .. Before optional callout "AgesaHookBeforeDramInit"
+  TpProcMemAfterAgesaHookBeforeExitSelfRef,  ///< 45 .. After optional callout "AgesaHookBeforeDramInit"
+  TpProcMemAfterMemDataInit,          ///< 46 .. After MemDataInit
+  TpProcMemInitializeMCT,             ///< 47 .. Before InitializeMCT
+  TpProcMemLvDdr3,                    ///< 48 .. Before LV DDR3
+  TpProcMemInitMCT,                   ///< 49 .. Before InitMCT
+  TpProcMemOtherTiming,               ///< 4A.. Before OtherTiming
+  TpProcMemUMAMemTyping,              ///< 4B .. Before UMAMemTyping
+  TpProcMemSetDqsEccTmgs,             ///< 4C .. Before SetDqsEccTmgs
+  TpProcMemMemClr,                    ///< 4D .. Before MemClr
+  TpProcMemOnDimmThermal,             ///< 4E .. Before On DIMM Thermal
+  TpProcMemDmi,                       ///< 4F .. Before DMI
+  TpProcMemEnd,                       ///< 50 .. End of memory code
+
+  // CPU test points
+  TpProcCpuEntryDmi,                  ///< 51 .. Entry point CreateDmiRecords
+  TpProcCpuEntryPstate,               ///< 52 .. Entry point GenerateSsdt
+  TpProcCpuEntryPstateLeveling,       ///< 53 .. Entry point PStateLeveling
+  TpProcCpuEntryPstateGather,         ///< 54 .. Entry point PStateGatherData
+  TpProcCpuEntryWhea,                 ///< 55 .. Entry point CreateAcpiWhea
+  TpProcCpuEntrySrat,                 ///< 56 .. Entry point CreateAcpiSrat
+  TpProcCpuEntrySlit,                 ///< 57 .. Entry point CreateAcpiSlit
+  TpProcCpuProcessRegisterTables,     ///< 58 .. Register table processing
+  TpProcCpuSetBrandID,                ///< 59 .. Set brand ID
+  TpProcCpuLocalApicInit,             ///< 5A .. Initialize local APIC
+  TpProcCpuLoadUcode,                 ///< 5B .. Load microcode patch
+  TpProcCpuBeforePMFeatureInit,       ///< 5C .. BeforePM feature dispatch point
+  TpProcCpuPowerMgmtInit,             ///< 5D .. Power Management table processing
+  TpProcCpuEarlyFeatureInit,          ///< 5E .. Early feature dispatch point
+  TpProcCpuCoreLeveling,              ///< 5F .. Core Leveling
+  TpProcCpuApMtrrSync,                ///< 60 .. AP MTRR sync up
+  TpProcCpuPostFeatureInit,           ///< 61 .. POST feature dispatch point
+  TpProcCpuFeatureLeveling,           ///< 62 .. CPU Feature Leveling
+  TpProcCpuBeforeRelinquishAPsFeatureInit,   ///< 63 .. Before Relinquishing control of APs feature dispatch point
+  TpProcCpuBeforeAllocateWheaBuffer,  ///< 64 .. Before the WHEA init code calls out to allocate a buffer
+  TpProcCpuAfterAllocateWheaBuffer,   ///< 65 .. After the WHEA init code calls out to allocate a buffer
+  TpProcCpuBeforeAllocateSratBuffer,  ///< 66 .. Before the SRAT init code calls out to allocate a buffer
+  TpProcCpuAfterAllocateSratBuffer,   ///< 67 .. After the SRAT init code calls out to allocate a buffer
+  TpProcCpuBeforeLocateSsdtBuffer,    ///< 68 .. Before the P-state init code calls out to locate a buffer
+  TpProcCpuAfterLocateSsdtBuffer,     ///< 69 .. After the P-state init code calls out to locate a buffer
+  TpProcCpuBeforeAllocateSsdtBuffer,  ///< 6A .. Before the P-state init code calls out to allocate a buffer
+  TpProcCpuAfterAllocateSsdtBuffer,   ///< 6B .. After the P-state init code calls out to allocate a buffer
+
+  // HT test points
+  TpProcHtEntry = 0x71,               ///< 71 .. Coherent Discovery begin (Public interface)
+  TpProcHtTopology,                   ///< 72 .. Topology match, routing, begin
+  TpProcHtManualNc,                   ///< 73 .. Manual Non-coherent Init begin
+  TpProcHtAutoNc,                     ///< 74 .. Automatic Non-coherent init begin
+  TpProcHtOptGather,                  ///< 75 .. Optimization: Gather begin
+  TpProcHtOptRegang,                  ///< 76 .. Optimization: Regang begin
+  TpProcHtOptLinks,                   ///< 77 .. Optimization: Link Begin
+  TpProcHtOptSubLinks,                ///< 78 .. Optimization: Sublinks begin
+  TpProcHtOptFinish,                  ///< 79 .. Optimization: Set begin
+  TpProcHtTrafficDist,                ///< 7A .. Traffic Distribution begin
+  TpProcHtTuning,                     ///< 7B .. Misc Tuning Begin
+  TpProcHtDone,                       ///< 7C .. HT Init complete
+  TpProcHtApMapEntry,                 ///< 7D .. AP HT: Init Maps begin
+  TpProcHtApMapDone,                  ///< 7E .. AP HT: Complete
+
+  // Extended memory test point
+  TpProcMemSendMRS2 = 0x80,           ///< 80 .. Sending MRS2
+  TpProcMemSendMRS3,                  ///< 81 .. Sedding MRS3
+  TpProcMemSendMRS1,                  ///< 82 .. Sending MRS1
+  TpProcMemSendMRS0,                  ///< 83 .. Sending MRS0
+  TpProcMemContinPatternGenRead,      ///< 84 .. Continuous Pattern Read
+  TpProcMemContinPatternGenWrite,     ///< 85 .. Continuous Pattern Write
+  TpProcMem__RdDqsTraining,           ///< 86 .. Mem: RdDqs Training begin
+  TpProcMemBefore__TrainExtVrefChange,///< 87 .. Mem: Before optional callout to platfrom BIOS to change External Vref during training
+  TpProcMemAfter__TrainExtVrefChange, ///< 88 .. Mem: After optional callout to platfrom BIOS to change External Vref during training
+
+  StartNbTestPoints = 0x90,           ///< 90 Entry used for range testing for @b NorthBridge related TPs
+  TpNbxxx,                            ///< 91 .
+  EndNbTestPoints,                    ///< 92 End of TP range for NB
+
+  StartFchTestPoints = 0xB0,          ///< B0 Entry used for range testing for @b FCH related TPs
+  TpFchInitResetDispatching,          ///< B1 .. FCH InitReset dispatch point
+  TpFchGppBeforePortTraining,         ///< B2 .. Before FCH GPP port training
+  TpFchGppGen1PortPolling,            ///< B3 .. FCH GPP port polling with GEN1 speed
+  TpFchGppGen2PortPolling,            ///< B4 .. FCH GPP port polling with GEN2 speed
+  TpFchGppAfterPortTraining,          ///< B5 .. After FCH GPP port training
+  TpFchInitEnvDispatching,            ///< B6 .. FCH InitEnv dispatch point
+  TpFchInitMidDispatching,            ///< B7 .. FCH InitMid dispatch point
+  TpFchInitLateDispatching,           ///< B8 .. FCH InitLate dispatch point
+  TpFchGppHotPlugging,                ///< B9 .. FCH GPP hot plug event
+  TpFchGppHotUnplugging,              ///< BA .. AFCH GPP hot unplug event
+  TpFchInitS3EarlyDispatching,        ///< BB .. FCH InitS3Early dispatch point
+  TpFchInitS3LateDispatching,         ///< BC .. FCH InitS3Late dispatch point
+  EndFchTestPoints,                   ///< BF End of TP range for FCH
+
+  // Interface test points
+  TpIfAmdInitResetEntry = 0xC0,       ///< C0 .. Entry to AmdInitReset
+  TpIfAmdInitResetExit,               ///< C1 .. Exiting from AmdInitReset
+  TpIfAmdInitRecoveryEntry,           ///< C2 .. Entry to AmdInitRecovery
+  TpIfAmdInitRecoveryExit,            ///< C3 .. Exiting from AmdInitRecovery
+  TpIfAmdInitEarlyEntry,              ///< C4 .. Entry to AmdInitEarly
+  TpIfAmdInitEarlyExit,               ///< C5 .. Exiting from AmdInitEarly
+  TpIfAmdInitPostEntry,               ///< C6 .. Entry to AmdInitPost
+  TpIfAmdInitPostExit,                ///< C7 .. Exiting from AmdInitPost
+  TpIfAmdInitEnvEntry,                ///< C8 .. Entry to AmdInitEnv
+  TpIfAmdInitEnvExit,                 ///< C9 .. Exiting from AmdInitEnv
+  TpIfAmdInitMidEntry,                ///< CA .. Entry to AmdInitMid
+  TpIfAmdInitMidExit,                 ///< CB .. Exiting from AmdInitMid
+  TpIfAmdInitLateEntry,               ///< CC .. Entry to AmdInitLate
+  TpIfAmdInitLateExit,                ///< CD .. Exiting from AmdInitLate
+  TpIfAmdS3SaveEntry,                 ///< CE .. Entry to AmdS3Save
+  TpIfAmdS3SaveExit,                  ///< CF .. Exiting from AmdS3Save
+  TpIfAmdInitResumeEntry,             ///< D0 .. Entry to AmdInitResume
+  TpIfAmdInitResumeExit,              ///< D1 .. Exiting from AmdInitResume
+  TpIfAmdS3LateRestoreEntry,          ///< D2 .. Entry to AmdS3LateRestore
+  TpIfAmdS3LateRestoreExit,           ///< D3 .. Exiting from AmdS3LateRestore
+  TpIfAmdLateRunApTaskEntry,          ///< D4 .. Entry to AmdS3LateRestore
+  TpIfAmdLateRunApTaskExit,           ///< D5 .. Exiting from AmdS3LateRestore
+  TpIfAmdReadEventLogEntry,           ///< D6 .. Entry to AmdReadEventLog
+  TpIfAmdReadEventLogExit,            ///< D7 .. Exiting from AmdReadEventLog
+  TpIfAmdGetApicIdEntry,              ///< D8 .. Entry to AmdGetApicId
+  TpIfAmdGetApicIdExit,               ///< D9 .. Exiting from AmdGetApicId
+  TpIfAmdGetPciAddressEntry,          ///< DA .. Entry to AmdGetPciAddress
+  TpIfAmdGetPciAddressExit,           ///< DB .. Exiting from AmdGetPciAddress
+  TpIfAmdIdentifyCoreEntry,           ///< DC .. Entry to AmdIdentifyCore
+  TpIfAmdIdentifyCoreExit,            ///< DD .. Exiting from AmdIdentifyCore
+  TpIfBeforeRunApFromIds,             ///< DE .. After IDS calls out to run code on an AP
+  TpIfAfterRunApFromIds,              ///< DF .. After IDS calls out to run code on an AP
+  TpIfBeforeGetIdsData,               ///< E0 .. Before IDS calls out to get IDS data
+  TpIfAfterGetIdsData,                ///< E1 .. After IDS calls out to get IDS data
+  TpIfBeforeAllocateHeapBuffer,       ///< E2 .. Before the heap manager calls out to allocate a buffer
+  TpIfAfterAllocateHeapBuffer,        ///< E3 .. After the heap manager calls out to allocate a buffer
+  TpIfBeforeDeallocateHeapBuffer,     ///< E4 .. Before the heap manager calls out to deallocate a buffer
+  TpIfAfterDeallocateHeapBuffer,      ///< E5 .. After the heap manager calls out to deallocate a buffer
+  TpIfBeforeLocateHeapBuffer,         ///< E6 .. Before the heap manager calls out to locate a buffer
+  TpIfAfterLocateHeapBuffer,          ///< E7 .. After the heap manager calls out to locate a buffer
+  TpIfBeforeRunApFromAllAps,          ///< E8 .. Before the BSP calls out to run code on an AP
+  TpIfAfterRunApFromAllAps,           ///< E9 .. After the BSP calls out to run code on an AP
+  TpIfBeforeRunApFromAllCore0s,       ///< EA .. Before the BSP calls out to run code on an AP
+  TpIfAfterRunApFromAllCore0s,        ///< EB .. After the BSP calls out to run code on an AP
+  TpIfBeforeAllocateS3SaveBuffer,     ///< EC .. Before the S3 save code calls out to allocate a buffer
+  TpIfAfterAllocateS3SaveBuffer,      ///< ED .. After the S3 save code calls out to allocate a buffer
+  TpIfBeforeAllocateMemoryS3SaveBuffer,  ///< EE .. Before the memory S3 save code calls out to allocate a buffer
+  TpIfAfterAllocateMemoryS3SaveBuffer,   ///< EF .. After the memory S3 save code calls out to allocate a buffer
+  TpIfBeforeLocateS3PciBuffer,        ///< F0 .. Before the memory code calls out to locate a buffer
+  TpIfAfterLocateS3PciBuffer,         ///< F1 .. After the memory code calls out to locate a buffer
+  TpIfBeforeLocateS3CPciBuffer,       ///< F2 .. Before the memory code calls out to locate a buffer
+  TpIfAfterLocateS3CPciBuffer,        ///< F3 .. After the memory code calls out to locate a buffer
+  TpIfBeforeLocateS3MsrBuffer,        ///< F4 .. Before the memory code calls out to locate a buffer
+  TpIfAfterLocateS3MsrBuffer,         ///< F5 .. After the memory code calls out to locate a buffer
+  TpIfBeforeLocateS3CMsrBuffer,       ///< F6 .. Before the memory code calls out to locate a buffer
+  TpIfAfterLocateS3CMsrBuffer,        ///< F7 .. After the memory code calls out to locate a buffer
+  TpPerfUnit,                         ///< F8 .. The Unit of performance measure.
+  EndAgesaTps = 0xFF,                 ///< Last defined AGESA TP
+} AGESA_TP;
+
+///Ids Feat description
+typedef enum {
+  IDS_FEAT_UCODE_UPDATE = 0x0000,   ///< Feat for Ucode Update
+  IDS_FEAT_TARGET_PSTATE,           ///< Feat for Target Pstate
+  IDS_FEAT_POSTPSTATE,              ///< Feat for Post Pstate
+  IDS_FEAT_ECC_CTRL,                ///< Feat for Ecc Control
+  IDS_FEAT_ECC_SYMBOL_SIZE,         ///< Feat for Ecc symbol size
+  IDS_FEAT_DCT_ALLMEMCLK,           ///< Feat for all memory clock
+  IDS_FEAT_DCT_GANGMODE,            ///< Feat for Dct gang mode
+  IDS_FEAT_DCT_BURSTLENGTH,         ///< Feat for dct burst length
+  IDS_FEAT_DCT_POWERDOWN,           ///< Feat for dct power down
+  IDS_FEAT_DCT_DLLSHUTDOWN,         ///< Feat for dct dll shut down
+  IDS_FEAT_PROBE_FILTER,            ///< Feat for probe filter
+  IDS_FEAT_HDTOUT,                  ///< Feat for hdt out
+  IDS_FEAT_HT_SETTING,              ///< Feat for Ht setting
+  IDS_FEAT_GNB_PLATFORMCFG,         ///< Feat for override GNB platform config
+  IDS_FEAT_CPB_CTRL,                ///< Feat for Config the Core peformance boost feature
+  IDS_FEAT_HTC_CTRL,                ///< Feat for Hardware Thermal Control
+  IDS_FEAT_MEMORY_MAPPING,          ///< Feat for Memory Mapping
+  IDS_FEAT_POWER_POLICY,            ///< Feat for Power Policy
+  IDS_FEAT_NV_TO_CMOS,              ///< Feat for Save BSP Nv to CMOS
+  IDS_FEAT_COMMON,                  ///< Common Feat
+  IDS_FEAT_END = 0xFF               ///< End of Common feat
+} IDS_FEAT;
+
+///Ids IDT table function ID
+typedef enum {
+  IDS_IDT_REPLACE_IDTR_FOR_BSC = 0x0000,   ///< Function ID for saving IDTR for BSC
+  IDS_IDT_RESTORE_IDTR_FOR_BSC,            ///< Function ID for restoring IDTR for BSC
+  IDS_IDT_UPDATE_EXCEPTION_VECTOR_FOR_AP,  ///< Function ID for updating exception vector
+} IDS_IDT_FUNC_ID;
+
+typedef IDS_STATUS IDS_COMMON_FUNC (
+  IN OUT   VOID *DataPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN       IDS_NV_ITEM *IdsNvPtr
+  );
+
+typedef IDS_COMMON_FUNC *PIDS_COMMON_FUNC;
+
+/// Data Structure of IDS Feature block
+typedef  struct _IDS_FAMILY_FEAT_STRUCT {
+  IDS_FEAT  IdsFeat;      ///< Ids Feat ID
+  BOOLEAN IsBsp;          ///< swith for Bsp check
+  AGESA_IDS_OPTION IdsOption;   ///< IDS option
+  UINT64 CpuFamily;       ///<
+  PIDS_COMMON_FUNC  pf_idsoption;   ///<pointer to function
+} IDS_FAMILY_FEAT_STRUCT;
+
+
+/// Data Structure of IDS option
+typedef  struct _IDS_OPTION_STRUCT {
+  AGESA_IDS_OPTION idsoption;       ///< IDS option
+  PIDS_COMMON_FUNC  pf_idsoption;   ///<pointer to function
+} IDS_OPTION_STRUCT;
+
+/// Data Structure of IDS option table
+typedef struct _IDS_OPTION_STRUCT_TBL {
+  UINT8 version;      ///<Version of IDS option table
+  UINT16 size;        ///<Size of IDS option table
+  CONST IDS_OPTION_STRUCT  *pIdsOptionStruct; ///<pointer to array of  structure
+} IDS_OPTION_STRUCT_TBL;
+
+#define IDS_NV_TO_CMOS_LEN_BYTE   1
+#define IDS_NV_TO_CMOS_LEN_WORD   2
+#define IDS_NV_TO_CMOS_LEN_END   0xFF
+#define IDS_NV_TO_CMOS_ID_END   0xFFFF
+
+/// Data struct of set/get NV to/from CMOS
+typedef struct _IDS_NV_TO_CMOS {
+  UINT8 Length;       ///< Length of NV
+  UINT16 IDS_NV_ID; ///< IDS id
+} IDS_NV_TO_CMOS;
+
+IDS_STATUS
+AmdIdsCtrlDispatcher (
+  IN       AGESA_IDS_OPTION IdsOption,
+  IN OUT   VOID *DataPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+IdsOptionCallout (
+  IN       UINTN                CallOutId,
+  IN OUT   VOID *DataPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+AmdIdsDebugPrintInit (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+AmdIdsDebugPrintExit (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+AmdIdsDebugPrintS3Exit (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+AmdIdsDebugPrintS3ApExit (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+AmdIdsDebugPrint (
+  IN       UINT64 Flag,
+  IN       CHAR8 *Format,
+  IN       ...
+  );
+
+VOID
+AmdIdsDebugPrintHt (
+  IN      CHAR8 *Format,
+  IN      ...
+  );
+
+VOID
+AmdIdsDebugPrintCpu (
+  IN      CHAR8 *Format,
+  IN      ...
+  );
+
+VOID
+AmdIdsDebugPrintMem (
+  IN      CHAR8 *Format,
+  IN      ...
+  );
+
+VOID
+AmdIdsDebugPrintGnb (
+  IN      CHAR8 *Format,
+  IN      ...
+  );
+
+VOID
+AmdIdsDebugPrintFlush (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+IdsMemTimeOut (
+  IN OUT   VOID *DataPtr
+  );
+
+VOID
+IdsAgesaTestPoint (
+  IN      AGESA_TP TestPoint,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ *  IDS Backend Function for ASSERT
+ *
+ * Halt execution with stop code display.  Stop Code is displayed on port 80, with rotation so that
+ * it is visible on 8, 16, or 32 bit display.  The stop code is alternated with 0xDEAD on the display,
+ * to help distinguish the stop code from a post code loop.
+ * Additional features may be available if using simulation.
+ *
+ * @param[in]     FileCode    File code(define in FILECODE.h) mix with assert Line num.
+ *
+ * @retval         TRUE     No error
+**/
+BOOLEAN
+IdsAssert (
+  IN      UINT32 FileCode
+  );
+
+/**
+ * The engine code for ASSERT MACRO
+ *
+ * Halt execution with stop code display.  Stop Code is displayed on port 80, with rotation so that
+ * it is visible on 8, 16, or 32 bit display.  The stop code is alternated with 0xDEAD on the display,
+ * to help distinguish the stop code from a post code loop.
+ * Additional features may be available if using simulation.
+ *
+ * @param[in]     FileCode    File code(define in FILECODE.h) mix with assert Line num.
+ *
+ */
+BOOLEAN
+IdsErrorStop (
+  IN      UINT32 FileCode
+  );
+
+VOID
+IdsDelay (
+  IN	VOID
+);
+
+BOOLEAN
+AmdHeapIntactCheck (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+IdsCarCorruptionCheck (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+IDS_STATUS
+IdsExceptionTrap (
+  IN       IDS_IDT_FUNC_ID IdsIdtFuncId,
+  IN       VOID *DataPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+#if IDSOPT_IDS_ENABLED == FALSE
+  #undef IEM_SKIP_CODE
+  #undef IEM_INSERT_CODE
+#endif
+#ifndef IEM_SKIP_CODE
+  #define IEM_SKIP_CODE(L)
+#endif
+#ifndef IEM_INSERT_CODE
+  #define IEM_INSERT_CODE(L,Fn,Parm)
+#endif
+
+//Note a is from 0 to 63
+#define DEBUG_PRINT_SHIFT(a)   ((UINT64)1 << a)
+//If you change the Bitmap definition below, please change the Hash in ParseFilter of hdtout2008.pl accordingly
+//Memory Masks
+#define MEM_SETREG                                  DEBUG_PRINT_SHIFT (0)
+#define MEM_GETREG                                  DEBUG_PRINT_SHIFT (1)
+#define MEM_FLOW                                    DEBUG_PRINT_SHIFT (2)
+#define MEM_STATUS                                  DEBUG_PRINT_SHIFT (3)
+#define MEMORY_TRACE_RSV1                           DEBUG_PRINT_SHIFT (4)
+#define MEMORY_TRACE_RSV2                           DEBUG_PRINT_SHIFT (5)
+#define MEMORY_TRACE_RSV3                           DEBUG_PRINT_SHIFT (6)
+#define MEMORY_TRACE_RSV4                           DEBUG_PRINT_SHIFT (7)
+#define MEMORY_TRACE_RSV5                           DEBUG_PRINT_SHIFT (8)
+#define MEMORY_TRACE_RSV6                           DEBUG_PRINT_SHIFT (9)
+
+
+
+//CPU Masks
+#define CPU_TRACE                                   DEBUG_PRINT_SHIFT (10)
+#define CPU_TRACE_RSV1                              DEBUG_PRINT_SHIFT (11)
+#define CPU_TRACE_RSV2                              DEBUG_PRINT_SHIFT (12)
+#define CPU_TRACE_RSV3                              DEBUG_PRINT_SHIFT (13)
+#define CPU_TRACE_RSV4                              DEBUG_PRINT_SHIFT (14)
+#define CPU_TRACE_RSV5                              DEBUG_PRINT_SHIFT (15)
+#define CPU_TRACE_RSV6                              DEBUG_PRINT_SHIFT (16)
+#define CPU_TRACE_RSV7                              DEBUG_PRINT_SHIFT (17)
+#define CPU_TRACE_RSV8                              DEBUG_PRINT_SHIFT (18)
+#define CPU_TRACE_RSV9                              DEBUG_PRINT_SHIFT (19)
+
+//GNB Masks
+#define GNB_TRACE                                   DEBUG_PRINT_SHIFT (20)
+#define PCIE_MISC                                   DEBUG_PRINT_SHIFT (21)
+#define PCIE_PORTREG_TRACE                          DEBUG_PRINT_SHIFT (22)
+#define PCIE_HOSTREG_TRACE                          DEBUG_PRINT_SHIFT (23)
+#define GNB_TRACE_RSV2                              DEBUG_PRINT_SHIFT (24)
+#define NB_MISC                                     DEBUG_PRINT_SHIFT (25)
+#define GNB_TRACE_RSV3                              DEBUG_PRINT_SHIFT (26)
+#define GFX_MISC                                    DEBUG_PRINT_SHIFT (27)
+#define NB_SMUREG_TRACE                             DEBUG_PRINT_SHIFT (28)
+#define GNB_TRACE_RSV1                              DEBUG_PRINT_SHIFT (29)
+
+//HT Masks
+#define HT_TRACE                                    DEBUG_PRINT_SHIFT (30)
+#define HT_TRACE_RSV1                               DEBUG_PRINT_SHIFT (31)
+#define HT_TRACE_RSV2                               DEBUG_PRINT_SHIFT (32)
+#define HT_TRACE_RSV3                               DEBUG_PRINT_SHIFT (33)
+#define HT_TRACE_RSV4                               DEBUG_PRINT_SHIFT (34)
+#define HT_TRACE_RSV5                               DEBUG_PRINT_SHIFT (35)
+#define HT_TRACE_RSV6                               DEBUG_PRINT_SHIFT (36)
+#define HT_TRACE_RSV7                               DEBUG_PRINT_SHIFT (37)
+#define HT_TRACE_RSV8                               DEBUG_PRINT_SHIFT (38)
+#define HT_TRACE_RSV9                               DEBUG_PRINT_SHIFT (39)
+
+//FCH Masks
+#define FCH_TRACE                                    DEBUG_PRINT_SHIFT (40)
+#define FCH_TRACE_RSV1                               DEBUG_PRINT_SHIFT (41)
+#define FCH_TRACE_RSV2                               DEBUG_PRINT_SHIFT (42)
+#define FCH_TRACE_RSV3                               DEBUG_PRINT_SHIFT (43)
+#define FCH_TRACE_RSV4                               DEBUG_PRINT_SHIFT (44)
+#define FCH_TRACE_RSV5                               DEBUG_PRINT_SHIFT (45)
+#define FCH_TRACE_RSV6                               DEBUG_PRINT_SHIFT (46)
+#define FCH_TRACE_RSV7                               DEBUG_PRINT_SHIFT (47)
+#define FCH_TRACE_RSV8                               DEBUG_PRINT_SHIFT (48)
+#define FCH_TRACE_RSV9                               DEBUG_PRINT_SHIFT (49)
+
+//Other Masks
+#define MAIN_FLOW                                    DEBUG_PRINT_SHIFT (50)
+#define EVENT_LOG                                    DEBUG_PRINT_SHIFT (51)
+#define PERFORMANCE_ANALYSE                          DEBUG_PRINT_SHIFT (52)
+
+//Ids Masks
+#define IDS_TRACE                                    DEBUG_PRINT_SHIFT (53)
+#define IDS_REG                                      DEBUG_PRINT_SHIFT (54)
+#define IDS_TRACE_RSV2                               DEBUG_PRINT_SHIFT (55)
+#define IDS_TRACE_RSV3                               DEBUG_PRINT_SHIFT (56)
+
+//S3
+#define S3_TRACE                                     DEBUG_PRINT_SHIFT (57)
+
+//Library function to read/write PCI/MSR registers
+#define LIB_PCI_RD                                   DEBUG_PRINT_SHIFT (58)
+#define LIB_PCI_WR                                   DEBUG_PRINT_SHIFT (59)
+
+//Reserved
+#define TRACE_RSV3                                   DEBUG_PRINT_SHIFT (60)
+#define TRACE_RSV4                                   DEBUG_PRINT_SHIFT (61)
+#define TRACE_RSV5                                   DEBUG_PRINT_SHIFT (62)
+#define TRACE_RSV6                                   DEBUG_PRINT_SHIFT (63)
+
+#endif // _IDS_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/IdsHt.h b/src/vendorcode/amd/agesa/f15/Include/IdsHt.h
new file mode 100644
index 0000000000..bdda364fe9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/IdsHt.h
@@ -0,0 +1,124 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD IDS HyperTransport Definitions
+ *
+ * Contains AMD AGESA Integrated Debug HT related items.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  IDS
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _IDS_HT_H_
+#define _IDS_HT_H_
+
+// Frequency equates for call backs which take an actual frequency setting
+#define HT_FREQUENCY_200M            0
+#define HT_FREQUENCY_400M            2
+#define HT_FREQUENCY_600M            4
+#define HT_FREQUENCY_800M            5
+#define HT_FREQUENCY_1000M           6
+#define HT_FREQUENCY_1200M           7
+#define HT_FREQUENCY_1400M           8
+#define HT_FREQUENCY_1600M           9
+#define HT_FREQUENCY_1800M           10
+#define HT_FREQUENCY_2000M           11
+#define HT_FREQUENCY_2200M           12
+#define HT_FREQUENCY_2400M           13
+#define HT_FREQUENCY_2600M           14
+#define HT_FREQUENCY_2800M           17
+#define HT_FREQUENCY_3000M           18
+#define HT_FREQUENCY_3200M           19
+#define HT_FREQUENCY_3600M           20
+
+/**
+ * HT IDS: HT Link Port Override params.
+ *
+ * Provide an absolute override of HT Link Port settings.  No checking is done that
+ * the settings obey limits or capabilities, this responsibility rests with the user.
+ *
+ * Rules for values of structure items:
+ * - Socket
+ *   - HT_LIST_TERMINAL == end of port override list, rest of item is not accessed
+ *   - HT_LIST_MATCH_ANY == Match Any Socket
+ *   - 0 .. 7 == The matching socket
+ * - Link
+ *   - HT_LIST_MATCH_ANY == Match Any package link (that is not the internal links)
+ *   - HT_LIST_MATCH_INTERNAL_LINK == Match the internal links
+ *   - 0 .. 7 == The matching package link.  0 .. 3 are the ganged links or sublink 0's, 4 .. 7 are the sublink1's.
+ * - Frequency
+ *   - HT_LIST_TERMINAL == Do not override the frequency, AUTO setting
+ *   - HT_FREQUENCY_200M .. HT_FREQUENCY_3600M = The frequency value to use
+ * - Widthin
+ *   - HT_LIST_TERMINAL == Do not override the width, AUTO setting
+ *   - 2, 4, 8, 16, 32 == The width value to use
+ * - Widthout
+ *   - HT_LIST_TERMINAL == Do not override the width, AUTO setting
+ *   - 2, 4, 8, 16, 32 == The width value to use
+ */
+typedef struct {
+  // Match Fields
+  UINT8       Socket;      ///< The Socket which this port is on.
+  UINT8       Link;        ///< The port for this package link on that socket.
+  // Override fields
+  UINT8       Frequency;   ///< Absolutely override the port's frequency.
+  UINT8       WidthIn;     ///< Absolutely override the port's width.
+  UINT8       WidthOut;    ///< Absolutely override the port's width.
+} HTIDS_PORT_OVERRIDE;
+
+/**
+ * A list of port overrides to search.
+ */
+typedef HTIDS_PORT_OVERRIDE *HTIDS_PORT_OVERRIDE_LIST;
+VOID
+HtIdsGetPortOverride (
+  IN       BOOLEAN                    IsSourcePort,
+  IN OUT   PORT_DESCRIPTOR            *Port0,
+  IN OUT   PORT_DESCRIPTOR            *Port1,
+  IN OUT   HTIDS_PORT_OVERRIDE_LIST   *PortOverrideList,
+  IN       STATE_DATA                 *State
+  );
+
+typedef
+VOID
+F_HtIdsGetPortOverride (
+  IN       BOOLEAN                    IsSourcePort,
+  IN OUT   PORT_DESCRIPTOR            *Port0,
+  IN OUT   PORT_DESCRIPTOR            *Port1,
+  IN OUT   HTIDS_PORT_OVERRIDE_LIST   *PortOverrideList,
+  IN       STATE_DATA                 *State
+  );
+typedef F_HtIdsGetPortOverride* PF_HtIdsGetPortOverride;
+#endif // _IDS_HT_H
diff --git a/src/vendorcode/amd/agesa/f15/Include/MaranelloInstall.h b/src/vendorcode/amd/agesa/f15/Include/MaranelloInstall.h
new file mode 100644
index 0000000000..a1dd4fcb9a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/MaranelloInstall.h
@@ -0,0 +1,116 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build options for a Maranello platform solution
+ *
+ * This file generates the defaults tables for the "Maranello" platform solution
+ * set of processors. The documented build options are imported from a user
+ * controlled file for processing.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 59375 $   @e \$Date: 2011-09-21 13:24:35 -0600 (Wed, 21 Sep 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFeatures.h"
+#include "Table.h"
+#include "CommonReturns.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "GnbInterfaceStub.h"
+
+/*****************************************************************************
+ *   Define the RELEASE VERSION string
+ *
+ * The Release Version string should identify the next planned release.
+ * When a branch is made in preparation for a release, the release manager
+ * should change/confirm that the branch version of this file contains the
+ * string matching the desired version for the release. The trunk version of
+ * the file should always contain a trailing 'X'. This will make sure that a
+ * development build from trunk will not be confused for a released version.
+ * The release manager will need to remove the trailing 'X' and update the
+ * version string as appropriate for the release. The trunk copy of this file
+ * should also be updated/incremented for the next expected version, + trailing 'X'
+ ****************************************************************************/
+                    // This is the delivery package title, "MarG34PI"
+                    // This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING  {'O', 'r', 'o', 'c', 'h', 'i', 'P', 'I'}
+
+                    // This is the release version number of the AGESA component
+                    // This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING  {'V', '1', '.', '2', '.', '0', '.', '0', ' ', ' ', ' ', ' '}
+
+
+
+// The Maranello solution is defined to be families 0x10 and 0x15 models 0x0 - 0xF in the G34 socket.
+#define INSTALL_G34_SOCKET_SUPPORT           TRUE
+#define INSTALL_FAMILY_10_SUPPORT            TRUE
+#define INSTALL_FAMILY_15_MODEL_0x_SUPPORT   TRUE
+
+#ifdef BLDOPT_REMOVE_FAMILY_10_SUPPORT
+  #if BLDOPT_REMOVE_FAMILY_10_SUPPORT == TRUE
+    #undef INSTALL_FAMILY_10_SUPPORT
+    #define INSTALL_FAMILY_10_SUPPORT     FALSE
+  #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_FAMILY_15_SUPPORT
+  #if BLDOPT_REMOVE_FAMILY_15_SUPPORT == TRUE
+    #undef INSTALL_FAMILY_15_MODEL_0x_SUPPORT
+    #define INSTALL_FAMILY_15_MODEL_0x_SUPPORT     FALSE
+  #endif
+#endif
+
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file.  The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE            (0xFF)
+#define DFLT_SCRUB_L2_RATE              (0x10)
+#define DFLT_SCRUB_L3_RATE              (0x10)
+#define DFLT_SCRUB_IC_RATE              (0)
+#define DFLT_SCRUB_DC_RATE              (0x12)
+#define DFLT_MEMORY_QUADRANK_TYPE       QUADRANK_REGISTERED
+#define DFLT_VRM_SLEW_RATE              (2500)
+
+
+// Instantiate all solution relevant data.
+#include "PlatformInstall.h"
+
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionApmInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionApmInstall.h
new file mode 100644
index 0000000000..4b3b9a8a25
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionApmInstall.h
@@ -0,0 +1,87 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Application Power Management (APM).
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 54493 $   @e \$Date: 2011-06-08 15:21:06 -0600 (Wed, 08 Jun 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_APM_INSTALL_H_
+#define _OPTION_APM_INSTALL_H_
+
+#include "cpuApm.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_CPU_APM_FEAT
+#define F15_APM_SUPPORT
+
+#if OPTION_CPU_APM == TRUE
+  #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+    // Family 15h
+    #ifdef OPTION_FAMILY15H
+      #if OPTION_FAMILY15H == TRUE
+        #if (OPTION_FAMILY15H_OR == TRUE) || (OPTION_FAMILY15H_KM == TRUE)
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureApm;
+          #undef OPTION_CPU_APM_FEAT
+          #define OPTION_CPU_APM_FEAT &CpuFeatureApm,
+          extern CONST APM_FAMILY_SERVICES ROMDATA F15ApmSupport;
+          #undef F15_APM_SUPPORT
+          #define F15_APM_SUPPORT {AMD_FAMILY_15_OR | AMD_FAMILY_15_KM, &F15ApmSupport},
+        #endif
+      #endif
+    #endif
+  #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA ApmFamilyServiceArray[] =
+{
+  F15_APM_SUPPORT
+  {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA ApmFamilyServiceTable =
+{
+  (sizeof (ApmFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+  &ApmFamilyServiceArray[0]
+};
+
+#endif  // _OPTION_APM_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionC6Install.h b/src/vendorcode/amd/agesa/f15/Include/OptionC6Install.h
new file mode 100644
index 0000000000..2e944bf65a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionC6Install.h
@@ -0,0 +1,164 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: C6 C-state
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_C6_STATE_INSTALL_H_
+#define _OPTION_C6_STATE_INSTALL_H_
+
+#include "cpuC6State.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_C6_STATE_FEAT
+#define F12_C6_STATE_SUPPORT
+#define F14_ON_C6_STATE_SUPPORT
+#define F15_OR_C6_STATE_SUPPORT
+
+#if OPTION_C6_STATE == TRUE
+  #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+    #ifdef OPTION_FAMILY12H
+      #if OPTION_FAMILY12H == TRUE
+        #if OPTION_FAMILY12H_LN == TRUE
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureC6State;
+          #undef OPTION_C6_STATE_FEAT
+          #define OPTION_C6_STATE_FEAT &CpuFeatureC6State,
+          extern CONST C6_FAMILY_SERVICES ROMDATA F12C6Support;
+          #undef F12_C6_STATE_SUPPORT
+          #define F12_C6_STATE_SUPPORT {AMD_FAMILY_12_LN, &F12C6Support},
+
+          #if OPTION_EARLY_SAMPLES == TRUE
+            extern F_F12_ES_C6_INIT F12C6A0Workaround;
+
+            CONST F12_ES_C6_SUPPORT ROMDATA F12EarlySampleC6Support =
+            {
+              F12C6A0Workaround
+            };
+          #else
+            CONST F12_ES_C6_SUPPORT ROMDATA F12EarlySampleC6Support =
+            {
+              (PF_F12_ES_C6_INIT) CommonVoid
+            };
+          #endif
+
+        #endif
+      #endif
+    #endif
+
+    #ifdef OPTION_FAMILY14H
+      #if OPTION_FAMILY14H == TRUE
+        #if (OPTION_FAMILY14H_ON == TRUE)
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureC6State;
+          #undef OPTION_C6_STATE_FEAT
+          #define OPTION_C6_STATE_FEAT &CpuFeatureC6State,
+          extern CONST C6_FAMILY_SERVICES ROMDATA F14OnC6Support;
+          #undef F14_ON_C6_STATE_SUPPORT
+          #define F14_ON_C6_STATE_SUPPORT {AMD_FAMILY_14_ON, &F14OnC6Support},
+
+          #if (OPTION_EARLY_SAMPLES == TRUE)
+            extern F_F14_ON_ES_IS_C6_SUPPORTED F14IsC6DisabledEarlySample;
+            extern F_F14_ON_ES_C6_INIT F14C6A0Workaround;
+
+            CONST F14_ON_ES_C6_SUPPORT ROMDATA F14OnEarlySampleC6Support =
+            {
+              F14IsC6DisabledEarlySample,
+              F14C6A0Workaround
+            };
+          #else
+            CONST F14_ON_ES_C6_SUPPORT ROMDATA F14OnEarlySampleC6Support =
+            {
+              (PF_F14_ON_ES_IS_C6_SUPPORTED) CommonVoid,
+              (PF_F14_ON_ES_C6_INIT) CommonVoid
+            };
+          #endif
+        #endif
+
+      #endif
+    #endif
+
+    #ifdef OPTION_FAMILY15H
+      #if OPTION_FAMILY15H == TRUE
+        #if (OPTION_FAMILY15H_OR == TRUE)
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureC6State;
+          #undef OPTION_C6_STATE_FEAT
+          #define OPTION_C6_STATE_FEAT &CpuFeatureC6State,
+          extern CONST C6_FAMILY_SERVICES ROMDATA F15OrC6Support;
+          #undef F15_OR_C6_STATE_SUPPORT
+          #define F15_OR_C6_STATE_SUPPORT {AMD_FAMILY_15_OR, &F15OrC6Support},
+
+          #if (OPTION_EARLY_SAMPLES == TRUE)
+            extern F_F15_OR_ES_IS_C6_SUPPORTED F15OrIsC6DisabledEarlySample;
+
+            CONST F15_OR_ES_C6_SUPPORT ROMDATA F15OrEarlySampleC6Support =
+            {
+              F15OrIsC6DisabledEarlySample
+            };
+          #else
+            CONST F15_OR_ES_C6_SUPPORT ROMDATA F15OrEarlySampleC6Support =
+            {
+              (PF_F15_OR_ES_IS_C6_SUPPORTED) CommonVoid
+            };
+          #endif
+        #endif
+
+      #endif
+    #endif
+  #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA C6FamilyServiceArray[] =
+{
+  F12_C6_STATE_SUPPORT
+  F14_ON_C6_STATE_SUPPORT
+  F15_OR_C6_STATE_SUPPORT
+  {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA C6FamilyServiceTable =
+{
+  (sizeof (C6FamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+  &C6FamilyServiceArray[0]
+};
+
+#endif  // _OPTION_C6_STATE_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionCpbInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionCpbInstall.h
new file mode 100644
index 0000000000..d47619baa7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionCpbInstall.h
@@ -0,0 +1,170 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Core Performance Boost
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 46389 $   @e \$Date: 2011-01-31 20:22:49 -0700 (Mon, 31 Jan 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_CPB_INSTALL_H_
+#define _OPTION_CPB_INSTALL_H_
+
+#include "cpuCpb.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_CPB_FEAT
+#define F10_CPB_SUPPORT
+#define F12_CPB_SUPPORT
+#define F14_ON_CPB_SUPPORT
+#define F15_OR_CPB_SUPPORT
+
+#if OPTION_CPB == TRUE
+  #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE)
+    // Family 10h
+    #ifdef OPTION_FAMILY10H
+      #if OPTION_FAMILY10H == TRUE
+        #if OPTION_FAMILY10H_PH == TRUE
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCpb;
+          #undef OPTION_CPB_FEAT
+          #define OPTION_CPB_FEAT &CpuFeatureCpb,
+          extern CONST CPB_FAMILY_SERVICES ROMDATA F10CpbSupport;
+          #undef F10_CPB_SUPPORT
+          #define F10_CPB_SUPPORT {AMD_FAMILY_10_PH, &F10CpbSupport},
+        #endif
+      #endif
+    #endif
+
+    // Family 12h
+    #ifdef OPTION_FAMILY12H
+      #if OPTION_FAMILY12H == TRUE
+        #if OPTION_FAMILY12H_LN == TRUE
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCpb;
+          #undef OPTION_CPB_FEAT
+          #define OPTION_CPB_FEAT &CpuFeatureCpb,
+          extern CONST CPB_FAMILY_SERVICES ROMDATA F12CpbSupport;
+          #undef F12_CPB_SUPPORT
+          #define F12_CPB_SUPPORT {AMD_FAMILY_12_LN, &F12CpbSupport},
+          #if OPTION_EARLY_SAMPLES == TRUE
+            #if (AGESA_ENTRY_INIT_EARLY == TRUE)
+              extern F_F12_ES_CPB_INIT F12LnA1CpbHook;
+
+              CONST F12_ES_CPB_SUPPORT ROMDATA F12EarlySampleCpbSupport =
+              {
+                F12LnA1CpbHook
+              };
+            #else
+              CONST F12_ES_CPB_SUPPORT ROMDATA F12EarlySampleCpbSupport =
+              {
+                (PF_F12_ES_CPB_INIT) CommonVoid
+              };
+            #endif
+          #else
+            CONST F12_ES_CPB_SUPPORT ROMDATA F12EarlySampleCpbSupport =
+            {
+              (PF_F12_ES_CPB_INIT) CommonVoid
+            };
+          #endif
+        #endif
+      #endif
+    #endif
+
+    // Family 14h
+    #ifdef OPTION_FAMILY14H
+      #if OPTION_FAMILY14H == TRUE
+        #if OPTION_FAMILY14H_ON == TRUE
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCpb;
+          #undef OPTION_CPB_FEAT
+          #define OPTION_CPB_FEAT &CpuFeatureCpb,
+          extern CONST CPB_FAMILY_SERVICES ROMDATA F14OnCpbSupport;
+          #undef F14_ON_CPB_SUPPORT
+          #define F14_ON_CPB_SUPPORT {AMD_FAMILY_14_ON, &F14OnCpbSupport},
+        #endif
+      #endif
+    #endif
+
+    // Family 15h
+    #ifdef OPTION_FAMILY15H
+      #if OPTION_FAMILY15H == TRUE
+        #if (OPTION_FAMILY15H_OR == TRUE)
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCpb;
+          #undef OPTION_CPB_FEAT
+          #define OPTION_CPB_FEAT &CpuFeatureCpb,
+          extern CONST CPB_FAMILY_SERVICES ROMDATA F15OrCpbSupport;
+          #undef F15_OR_CPB_SUPPORT
+          #define F15_OR_CPB_SUPPORT {AMD_FAMILY_15_OR, &F15OrCpbSupport},
+
+          #if OPTION_EARLY_SAMPLES == TRUE
+            extern F_F15_OR_ES_IS_CPB_SUPPORTED F15OrIsCpbDisabledEarlySample;
+
+            CONST F15_OR_ES_CPB_SUPPORT ROMDATA F15OrEarlySampleCpbSupport =
+            {
+              F15OrIsCpbDisabledEarlySample
+            };
+          #else
+            CONST F15_OR_ES_CPB_SUPPORT ROMDATA F15OrEarlySampleCpbSupport =
+            {
+              (PF_F15_OR_ES_IS_CPB_SUPPORTED) CommonVoid
+            };
+          #endif
+        #endif
+      #endif
+    #endif
+
+  #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA CpbFamilyServiceArray[] =
+{
+  F10_CPB_SUPPORT
+  F12_CPB_SUPPORT
+  F14_ON_CPB_SUPPORT
+  F15_OR_CPB_SUPPORT
+  {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA CpbFamilyServiceTable =
+{
+  (sizeof (CpbFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+  &CpbFamilyServiceArray[0]
+};
+
+#endif  // _OPTION_CPB_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionCpuCacheFlushOnHaltInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionCpuCacheFlushOnHaltInstall.h
new file mode 100644
index 0000000000..35362ffdb7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionCpuCacheFlushOnHaltInstall.h
@@ -0,0 +1,126 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: CPU Cache Flush On Halt
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 56186 $   @e \$Date: 2011-07-08 15:35:23 -0600 (Fri, 08 Jul 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_CPU_CACHEFLUSHONHALT_INSTALL_H_
+#define _OPTION_CPU_CACHEFLUSHONHALT_INSTALL_H_
+
+#include "cpuPostInit.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT
+#define F10_BL_CPU_CFOH_SUPPORT
+#define F10_DA_CPU_CFOH_SUPPORT
+#define F10_CPU_CFOH_SUPPORT
+#define F15_OR_CPU_CFOH_SUPPORT
+#define F15_TN_CPU_CFOH_SUPPORT
+
+#if OPTION_CPU_CFOH == TRUE
+  #if (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE)
+    extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCacheFlushOnHalt;
+
+    #ifdef OPTION_FAMILY10H
+      #if OPTION_FAMILY10H == TRUE
+        #undef OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT
+        #define OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT &CpuFeatureCacheFlushOnHalt,
+
+        #if OPTION_FAMILY10H_BL == TRUE
+          extern CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F10BlCacheFlushOnHalt;
+          #undef F10_BL_CPU_CFOH_SUPPORT
+          #define F10_BL_CPU_CFOH_SUPPORT {AMD_FAMILY_10_BL, &F10BlCacheFlushOnHalt},
+        #endif
+
+        #if OPTION_FAMILY10H_DA == TRUE
+          extern CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F10DaCacheFlushOnHalt;
+          #undef F10_DA_CPU_CFOH_SUPPORT
+          #define F10_DA_CPU_CFOH_SUPPORT {AMD_FAMILY_10_DA, &F10DaCacheFlushOnHalt},
+        #endif
+
+        #if (OPTION_FAMILY10H_RB == TRUE) || (OPTION_FAMILY10H_HY == TRUE) || (OPTION_FAMILY10H_PH == TRUE)
+          extern CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F10CacheFlushOnHalt;
+          #undef F10_CPU_CFOH_SUPPORT
+          #define F10_CPU_CFOH_SUPPORT {AMD_FAMILY_10_RB | AMD_FAMILY_10_HY | AMD_FAMILY_10_PH, &F10CacheFlushOnHalt},
+        #endif
+      #endif
+    #endif
+
+    #ifdef OPTION_FAMILY15H
+      #if OPTION_FAMILY15H == TRUE
+        #undef OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT
+        #define OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT &CpuFeatureCacheFlushOnHalt,
+
+        #if OPTION_FAMILY15H_OR == TRUE
+          extern CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F15OrCacheFlushOnHalt;
+          #undef F15_OR_CPU_CFOH_SUPPORT
+          #define F15_OR_CPU_CFOH_SUPPORT {AMD_FAMILY_15_OR, &F15OrCacheFlushOnHalt},
+        #endif
+
+        #if OPTION_FAMILY15H_TN == TRUE
+          extern CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F15TnCacheFlushOnHalt;
+          #undef F15_TN_CPU_CFOH_SUPPORT
+          #define F15_TN_CPU_CFOH_SUPPORT {AMD_FAMILY_15_TN, &F15TnCacheFlushOnHalt},
+        #endif
+      #endif
+    #endif
+  #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA CacheFlushOnHaltFamilyServiceArray[] =
+{
+  F10_BL_CPU_CFOH_SUPPORT
+  F10_DA_CPU_CFOH_SUPPORT
+  F10_CPU_CFOH_SUPPORT
+  F15_OR_CPU_CFOH_SUPPORT
+  F15_TN_CPU_CFOH_SUPPORT
+  {0, NULL}
+};
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA CacheFlushOnHaltFamilyServiceTable =
+{
+  (sizeof (CacheFlushOnHaltFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+  &CacheFlushOnHaltFamilyServiceArray[0]
+};
+
+#endif  // _OPTION_CPU_CACHEFLUSHONHALT_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionCpuCoreLevelingInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionCpuCoreLevelingInstall.h
new file mode 100644
index 0000000000..d0743ecc3c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionCpuCoreLevelingInstall.h
@@ -0,0 +1,120 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: CPU Core Leveling
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 56186 $   @e \$Date: 2011-07-08 15:35:23 -0600 (Fri, 08 Jul 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_CPU_CORELEVELING_INSTALL_H_
+#define _OPTION_CPU_CORELEVELING_INSTALL_H_
+
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_CPU_CORE_LEVELING_FEAT
+#define F10_REVE_CPU_CORELEVELING_SUPPORT
+#define F10_REVD_CPU_CORELEVELING_SUPPORT
+#define F10_REVC_CPU_CORELEVELING_SUPPORT
+#define F15_OR_CPU_CORELEVELING_SUPPORT
+#define F15_TN_CPU_CORELEVELING_SUPPORT
+
+#if OPTION_CPU_CORELEVLING == TRUE
+  #if (AGESA_ENTRY_INIT_EARLY == TRUE)
+    extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCoreLeveling;
+
+    // Family 10h
+    #if OPTION_FAMILY10H == TRUE
+      #undef OPTION_CPU_CORE_LEVELING_FEAT
+      #define OPTION_CPU_CORE_LEVELING_FEAT &CpuFeatureCoreLeveling,
+      #if OPTION_FAMILY10H_HY == TRUE
+        extern CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F10RevDCoreLeveling;
+        #undef F10_REVD_CPU_CORELEVELING_SUPPORT
+        #define F10_REVD_CPU_CORELEVELING_SUPPORT {AMD_FAMILY_10_HY, &F10RevDCoreLeveling},
+      #endif
+
+      #if (OPTION_FAMILY10H_RB == TRUE) || (OPTION_FAMILY10H_BL == TRUE) || (OPTION_FAMILY10H_DA == TRUE)
+        extern CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F10RevCCoreLeveling;
+        #undef F10_REVC_CPU_CORELEVELING_SUPPORT
+        #define F10_REVC_CPU_CORELEVELING_SUPPORT {AMD_FAMILY_10_RB | AMD_FAMILY_10_BL | AMD_FAMILY_10_DA, &F10RevCCoreLeveling},
+      #endif
+
+      #if (OPTION_FAMILY10H_PH == TRUE)
+        extern CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F10RevECoreLeveling;
+        #undef F10_REVE_CPU_CORELEVELING_SUPPORT
+        #define F10_REVE_CPU_CORELEVELING_SUPPORT {AMD_FAMILY_10_PH, &F10RevECoreLeveling},
+      #endif
+    #endif
+    // Family 15h
+    #if OPTION_FAMILY15H == TRUE
+      #undef OPTION_CPU_CORE_LEVELING_FEAT
+      #define OPTION_CPU_CORE_LEVELING_FEAT &CpuFeatureCoreLeveling,
+
+      #if (OPTION_FAMILY15H_OR == TRUE)
+        extern CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F15OrCoreLeveling;
+        #undef F15_OR_CPU_CORELEVELING_SUPPORT
+        #define F15_OR_CPU_CORELEVELING_SUPPORT {AMD_FAMILY_15_OR, &F15OrCoreLeveling},
+      #endif
+      #if (OPTION_FAMILY15H_TN == TRUE)
+        extern CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F15TnCoreLeveling;
+        #undef F15_TN_CPU_CORELEVELING_SUPPORT
+        #define F15_TN_CPU_CORELEVELING_SUPPORT {AMD_FAMILY_15_TN, &F15TnCoreLeveling},
+      #endif
+    #endif
+  #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA CoreLevelingFamilyServiceArray[] =
+{
+  F15_TN_CPU_CORELEVELING_SUPPORT
+  F15_OR_CPU_CORELEVELING_SUPPORT
+  F10_REVE_CPU_CORELEVELING_SUPPORT
+  F10_REVD_CPU_CORELEVELING_SUPPORT
+  F10_REVC_CPU_CORELEVELING_SUPPORT
+  {0, NULL}
+};
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA CoreLevelingFamilyServiceTable =
+{
+  (sizeof (CoreLevelingFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+  &CoreLevelingFamilyServiceArray[0]
+};
+
+#endif  // _OPTION_CPU_CORELEVELING_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionCpuFamiliesInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionCpuFamiliesInstall.h
new file mode 100644
index 0000000000..5cc4819046
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionCpuFamiliesInstall.h
@@ -0,0 +1,407 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of all appropriate CPU family specific support.
+ *
+ * This file generates the defaults tables for all family specific
+ * combinations.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 50628 $   @e \$Date: 2011-04-12 15:18:38 -0600 (Tue, 12 Apr 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+/*  Default all CPU Specific Service members to off.  They
+    will be enabled as needed by cross referencing families
+    with entry points in the family / model install files.  */
+#define GET_PSTATE_POWER            FALSE
+#define GET_PSTATE_FREQ             FALSE
+#define DISABLE_PSTATE              FALSE
+#define TRANSITION_PSTATE           FALSE
+#define PROC_IDD_MAX                FALSE
+#define GET_TSC_RATE                FALSE
+#define PSTATE_TRANSITION_LATENCY   FALSE
+#define GET_PSTATE_REGISTER_INFO    FALSE
+#define GET_PSTATE_MAX_STATE        FALSE
+#define SET_PSTATE_LEVELING_REG     FALSE
+#define GET_NB_FREQ                 FALSE
+#define GET_NB_IDD_MAX              FALSE
+#define IS_NBCOF_INIT_NEEDED        FALSE
+#define AP_INITIAL_LAUNCH           FALSE
+#define GET_AP_MAILBOX_FROM_HW      FALSE
+#define SET_AP_CORE_NUMBER          FALSE
+#define GET_AP_CORE_NUMBER          FALSE
+#define TRANSFER_AP_CORE_NUMBER     FALSE
+#define ID_POSITION_INITIAL_APICID  FALSE
+#define SAVE_FEATURES               FALSE
+#define WRITE_FEATURES              FALSE
+#define SET_DOWN_CORE_REG           FALSE
+#define SET_WARM_RESET_FLAG         FALSE
+#define GET_WARM_RESET_FLAG         FALSE
+#define USES_REGISTER_TABLES        FALSE
+#define BASE_FAMILY_PCI             FALSE
+#define MODEL_SPECIFIC_PCI          FALSE
+#define BASE_FAMILY_MSR             FALSE
+#define MODEL_SPECIFIC_MSR          FALSE
+#define BRAND_STRING1               FALSE
+#define BRAND_STRING2               FALSE
+#define BASE_FAMILY_HT_PCI          FALSE
+#define MODEL_SPECIFIC_HT_PCI       FALSE
+#define BASE_FAMILY_WORKAROUNDS     FALSE
+#define GET_PATCHES                 FALSE
+#define GET_PATCHES_EQUIVALENCE_TABLE FALSE
+#define GET_CACHE_INFO              FALSE
+#define GET_SYSTEM_PM_TABLE         FALSE
+#define GET_WHEA_INIT               FALSE
+#define GET_CFOH_REG                FALSE
+#define GET_PLATFORM_TYPE_SPECIFIC_INFO FALSE
+#define IS_NB_PSTATE_ENABLED        FALSE
+
+/*
+ * Pull in family specific services based on entry point
+ */
+#if AGESA_ENTRY_INIT_RESET == TRUE
+  #undef ID_POSITION_INITIAL_APICID
+  #define ID_POSITION_INITIAL_APICID  TRUE
+  #undef GET_AP_MAILBOX_FROM_HW
+  #define GET_AP_MAILBOX_FROM_HW      TRUE
+  #undef SET_WARM_RESET_FLAG
+  #define SET_WARM_RESET_FLAG         TRUE
+  #undef GET_WARM_RESET_FLAG
+  #define GET_WARM_RESET_FLAG         TRUE
+  #undef GET_CACHE_INFO
+  #define GET_CACHE_INFO              TRUE
+  #undef GET_AP_CORE_NUMBER
+  #define GET_AP_CORE_NUMBER          TRUE
+  #undef TRANSFER_AP_CORE_NUMBER
+  #define TRANSFER_AP_CORE_NUMBER     TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_RECOVERY == TRUE
+  #undef ID_POSITION_INITIAL_APICID
+  #define ID_POSITION_INITIAL_APICID  TRUE
+  #undef USES_REGISTER_TABLES
+  #define USES_REGISTER_TABLES        TRUE
+  #undef BASE_FAMILY_PCI
+  #define BASE_FAMILY_PCI             TRUE
+  #undef MODEL_SPECIFIC_PCI
+  #define MODEL_SPECIFIC_PCI          TRUE
+  #undef BASE_FAMILY_MSR
+  #define BASE_FAMILY_MSR             TRUE
+  #undef MODEL_SPECIFIC_MSR
+  #define MODEL_SPECIFIC_MSR          TRUE
+  #undef GET_CACHE_INFO
+  #define GET_CACHE_INFO              TRUE
+  #undef GET_PLATFORM_TYPE_SPECIFIC_INFO
+  #define GET_PLATFORM_TYPE_SPECIFIC_INFO TRUE
+  #undef IS_NB_PSTATE_ENABLED
+  #define IS_NB_PSTATE_ENABLED        TRUE
+  #undef GET_PATCHES
+  #define GET_PATCHES                 TRUE
+  #undef GET_PATCHES_EQUIVALENCE_TABLE
+  #define GET_PATCHES_EQUIVALENCE_TABLE TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+  #undef TRANSITION_PSTATE
+  #define TRANSITION_PSTATE           TRUE
+  #undef DISABLE_PSTATE
+  #define DISABLE_PSTATE              TRUE
+  #undef PROC_IDD_MAX
+  #define PROC_IDD_MAX                TRUE
+  #undef GET_TSC_RATE
+  #define GET_TSC_RATE                TRUE
+  #undef GET_NB_FREQ
+  #define GET_NB_FREQ                 TRUE
+  #undef GET_NB_IDD_MAX
+  #define GET_NB_IDD_MAX              TRUE
+  #undef IS_NBCOF_INIT_NEEDED
+  #define IS_NBCOF_INIT_NEEDED        TRUE
+  #undef AP_INITIAL_LAUNCH
+  #define AP_INITIAL_LAUNCH           TRUE
+  #undef GET_AP_MAILBOX_FROM_HW
+  #define GET_AP_MAILBOX_FROM_HW      TRUE
+  #undef SET_AP_CORE_NUMBER
+  #define SET_AP_CORE_NUMBER          TRUE
+  #undef GET_AP_CORE_NUMBER
+  #define GET_AP_CORE_NUMBER          TRUE
+  #undef TRANSFER_AP_CORE_NUMBER
+  #define TRANSFER_AP_CORE_NUMBER     TRUE
+  #undef ID_POSITION_INITIAL_APICID
+  #define ID_POSITION_INITIAL_APICID  TRUE
+  #undef SET_DOWN_CORE_REG
+  #define SET_DOWN_CORE_REG           TRUE
+  #undef SET_WARM_RESET_FLAG
+  #define SET_WARM_RESET_FLAG         TRUE
+  #undef GET_WARM_RESET_FLAG
+  #define GET_WARM_RESET_FLAG         TRUE
+  #undef USES_REGISTER_TABLES
+  #define USES_REGISTER_TABLES        TRUE
+  #undef BASE_FAMILY_PCI
+  #define BASE_FAMILY_PCI             TRUE
+  #undef MODEL_SPECIFIC_PCI
+  #define MODEL_SPECIFIC_PCI          TRUE
+  #undef BASE_FAMILY_MSR
+  #define BASE_FAMILY_MSR             TRUE
+  #undef MODEL_SPECIFIC_MSR
+  #define MODEL_SPECIFIC_MSR          TRUE
+  #undef BRAND_STRING1
+  #define BRAND_STRING1               TRUE
+  #undef BRAND_STRING2
+  #define BRAND_STRING2               TRUE
+  #undef BASE_FAMILY_HT_PCI
+  #define BASE_FAMILY_HT_PCI          TRUE
+  #undef MODEL_SPECIFIC_HT_PCI
+  #define MODEL_SPECIFIC_HT_PCI       TRUE
+  #undef BASE_FAMILY_WORKAROUNDS
+  #define BASE_FAMILY_WORKAROUNDS     TRUE
+  #undef GET_PATCHES
+  #define GET_PATCHES                 TRUE
+  #undef GET_PATCHES_EQUIVALENCE_TABLE
+  #define GET_PATCHES_EQUIVALENCE_TABLE TRUE
+  #undef GET_SYSTEM_PM_TABLE
+  #define GET_SYSTEM_PM_TABLE         TRUE
+  #undef GET_CACHE_INFO
+  #define GET_CACHE_INFO              TRUE
+  #undef GET_PLATFORM_TYPE_SPECIFIC_INFO
+  #define GET_PLATFORM_TYPE_SPECIFIC_INFO TRUE
+  #undef IS_NB_PSTATE_ENABLED
+  #define IS_NB_PSTATE_ENABLED        TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_POST == TRUE
+  #undef ID_POSITION_INITIAL_APICID
+  #define ID_POSITION_INITIAL_APICID  TRUE
+  #undef GET_PSTATE_POWER
+  #define GET_PSTATE_POWER            TRUE
+  #undef GET_PSTATE_FREQ
+  #define GET_PSTATE_FREQ             TRUE
+  #undef TRANSITION_PSTATE
+  #define TRANSITION_PSTATE           TRUE
+  #undef PROC_IDD_MAX
+  #define PROC_IDD_MAX                TRUE
+  #undef GET_AP_CORE_NUMBER
+  #define GET_AP_CORE_NUMBER          TRUE
+  #undef GET_PSTATE_REGISTER_INFO
+  #define GET_PSTATE_REGISTER_INFO    TRUE
+  #undef GET_PSTATE_MAX_STATE
+  #define GET_PSTATE_MAX_STATE        TRUE
+  #undef SET_PSTATE_LEVELING_REG
+  #define SET_PSTATE_LEVELING_REG     TRUE
+  #undef SET_WARM_RESET_FLAG
+  #define SET_WARM_RESET_FLAG         TRUE
+  #undef GET_WARM_RESET_FLAG
+  #define GET_WARM_RESET_FLAG         TRUE
+  #undef SAVE_FEATURES
+  #define SAVE_FEATURES               TRUE
+  #undef WRITE_FEATURES
+  #define WRITE_FEATURES              TRUE
+  #undef GET_CFOH_REG
+  #define GET_CFOH_REG                TRUE
+  #undef IS_NB_PSTATE_ENABLED
+  #define IS_NB_PSTATE_ENABLED        TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_ENV == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_MID == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_LATE == TRUE
+  #undef GET_AP_CORE_NUMBER
+  #define GET_AP_CORE_NUMBER          TRUE
+  #undef GET_PSTATE_FREQ
+  #define GET_PSTATE_FREQ             TRUE
+  #undef TRANSITION_PSTATE
+  #define TRANSITION_PSTATE           TRUE
+  #undef PSTATE_TRANSITION_LATENCY
+  #define PSTATE_TRANSITION_LATENCY   TRUE
+  #undef GET_WHEA_INIT
+  #define GET_WHEA_INIT               TRUE
+  #undef GET_PLATFORM_TYPE_SPECIFIC_INFO
+  #define GET_PLATFORM_TYPE_SPECIFIC_INFO TRUE
+  #undef GET_TSC_RATE
+  #define GET_TSC_RATE                TRUE
+  #undef BRAND_STRING1
+  #define BRAND_STRING1               TRUE
+  #undef BRAND_STRING2
+  #define BRAND_STRING2               TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_S3SAVE == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_RESUME == TRUE
+  #undef GET_CFOH_REG
+  #define GET_CFOH_REG                TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_LATE_RESTORE == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE
+  #undef ID_POSITION_INITIAL_APICID
+  #define ID_POSITION_INITIAL_APICID  TRUE
+#endif
+
+/*
+ * Initialize PCI MMIO mask to 0
+ */
+#define FAMILY_MMIO_BASE_MASK (0ull)
+
+
+/*
+ * Initialize all families to disabled
+ */
+#define OPT_F10_TABLE
+#define OPT_F12_TABLE
+#define OPT_F14_TABLE
+#define OPT_F15_TABLE
+
+#define OPT_F10_ID_TABLE
+#define OPT_F12_ID_TABLE
+#define OPT_F14_ID_TABLE
+#define OPT_F15_ID_TABLE
+
+
+/*
+ * Install family specific support
+ */
+#if (OPTION_FAMILY10H == TRUE)
+  #include  "OptionFamily10hInstall.h"
+#endif
+
+#if (OPTION_FAMILY12H == TRUE)
+  #include  "OptionFamily12hInstall.h"
+#endif
+
+#if (OPTION_FAMILY14H == TRUE)
+  #include  "OptionFamily14hInstall.h"
+#endif
+
+#if (OPTION_FAMILY15H_OR == TRUE) || (OPTION_FAMILY15H_TN == TRUE) || (OPTION_FAMILY15H_KM == TRUE)
+  #include  "OptionFamily15hInstall.h"
+#endif
+
+
+/*
+ * Process PCI MMIO mask
+ */
+
+// If size is 0, but base is not, break the build.
+#if (CFG_PCI_MMIO_BASE != 0) && (CFG_PCI_MMIO_SIZE == 0)
+  #error    BLDCFG: Invalid PCI MMIO size -- acceptable values are 1, 2, 4, 8, 16, 32, 64, 128, and 256
+#endif
+
+// If base is 0, but size is not, break the build.
+#if (CFG_PCI_MMIO_BASE == 0) && (CFG_PCI_MMIO_SIZE != 0)
+  #error    BLDCFG: Invalid PCI MMIO base -- must be 8MB or greater
+#endif
+
+#if (CFG_PCI_MMIO_BASE != 0) && (CFG_PCI_MMIO_SIZE != 0)
+  // Both are non-zero, begin further processing.
+
+  // Heap runs from 4MB to 8MB. Disallow any addresses below 8MB.
+  #if (CFG_PCI_MMIO_BASE < 0x800000)
+    #error    BLDCFG: Invalid PCI MMIO base -- must be 8MB or greater
+  #endif
+
+  // Break the build if the address is too high for the enabled families.
+  #if ((CFG_PCI_MMIO_BASE & FAMILY_MMIO_BASE_MASK) != 0)
+    #error       BLDCFG: Invalid PCI MMIO base address for the installed CPU families
+  #endif
+
+  // If the size parameter is not valid, break the build.
+  #if (CFG_PCI_MMIO_SIZE != 1) && (CFG_PCI_MMIO_SIZE != 2) && (CFG_PCI_MMIO_SIZE != 4) && (CFG_PCI_MMIO_SIZE != 8) && (CFG_PCI_MMIO_SIZE != 16)
+    #if (CFG_PCI_MMIO_SIZE != 32) && (CFG_PCI_MMIO_SIZE != 64) && (CFG_PCI_MMIO_SIZE != 128) && (CFG_PCI_MMIO_SIZE != 256)
+      #error      BLDCFG: Invalid PCI MMIO size -- acceptable values are 1, 2, 4, 8, 16, 32, 64, 128, and 256
+    #endif
+  #endif
+
+  #define PCI_MMIO_ALIGNMENT ((0x100000 * CFG_PCI_MMIO_SIZE) - 1)
+  // If the base is not aligned according to size, break the build.
+  #if ((CFG_PCI_MMIO_BASE & PCI_MMIO_ALIGNMENT) != 0)
+    #error      BLDCFG: Invalid PCI MMIO base -- must be properly aligned according to MMIO size
+  #endif
+  #undef PCI_MMIO_ALIGNMENT
+#endif
+
+/*
+ * Process sockets / modules
+ */
+#ifndef ADVCFG_PLATFORM_SOCKETS
+  #error BLDOPT Set Family supported sockets.
+#endif
+#ifndef ADVCFG_PLATFORM_MODULES
+  #error BLDOPT Set Family supported modules.
+#endif
+
+CONST OPTIONS_CONFIG_TOPOLOGY ROMDATA TopologyConfiguration =
+{
+  ADVCFG_PLATFORM_SOCKETS,
+  ADVCFG_PLATFORM_MODULES
+};
+
+/*
+ * Instantiate global data needed for processor identification
+ */
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA CpuSupportedFamiliesArray[] =
+{
+  OPT_F10_TABLE
+  OPT_F12_TABLE
+  OPT_F14_TABLE
+  OPT_F15_TABLE
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA CpuSupportedFamiliesTable =
+{
+  (sizeof (CpuSupportedFamiliesArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+  &CpuSupportedFamiliesArray[0]
+};
+
+
+CONST CPU_LOGICAL_ID_FAMILY_XLAT ROMDATA CpuSupportedFamilyIdArray[] =
+{
+  OPT_F10_ID_TABLE
+  OPT_F12_ID_TABLE
+  OPT_F14_ID_TABLE
+  OPT_F15_ID_TABLE
+};
+
+CONST CPU_FAMILY_ID_XLAT_TABLE ROMDATA CpuSupportedFamilyIdTable =
+{
+  (sizeof (CpuSupportedFamilyIdArray) / sizeof (CPU_LOGICAL_ID_FAMILY_XLAT)),
+  CpuSupportedFamilyIdArray
+};
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionCpuFeaturesInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionCpuFeaturesInstall.h
new file mode 100644
index 0000000000..44df5ba631
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionCpuFeaturesInstall.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of multiple CPU features.
+ *
+ * Aggregates enabled CPU features into a list for the dispatcher to process.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 54493 $   @e \$Date: 2011-06-08 15:21:06 -0600 (Wed, 08 Jun 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_CPU_FEATURES_INSTALL_H_
+#define _OPTION_CPU_FEATURES_INSTALL_H_
+
+#include "OptionHwC1eInstall.h"
+#include "OptionMsgBasedC1eInstall.h"
+#include "OptionSwC1eInstall.h"
+#include "OptionL3FeaturesInstall.h"
+#include "OptionCpuCoreLevelingInstall.h"
+#include "OptionIoCstateInstall.h"
+#include "OptionC6Install.h"
+#include "OptionCpbInstall.h"
+#include "OptionCpuCacheFlushOnHaltInstall.h"
+#include "OptionPstateHpcModeInstall.h"
+#include "OptionLowPwrPstateInstall.h"
+#include "OptionApmInstall.h"
+#include "OptionPreserveMailboxInstall.h"
+
+CONST CPU_FEATURE_DESCRIPTOR* ROMDATA SupportedCpuFeatureList[] =
+{
+  OPTION_HW_C1E_FEAT
+  OPTION_MSG_BASED_C1E_FEAT
+  OPTION_SW_C1E_FEAT
+  OPTION_L3_FEAT
+  OPTION_CPU_CORE_LEVELING_FEAT
+  OPTION_IO_CSTATE_FEAT
+  OPTION_C6_STATE_FEAT
+  OPTION_CPB_FEAT
+  OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT
+  OPTION_CPU_PSTATE_HPC_MODE_FEAT             // this function should be run before low power pstate for prochot
+  OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT_FEAT  // this function should be run before creating ACPI objects and after Pstate initialization
+  OPTION_CPU_APM_FEAT
+  OPTION_PRESERVE_MAILBOX_FEAT
+  NULL
+};
+
+
+#endif  // _OPTION_CPU_FEATURES_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionDmi.h b/src/vendorcode/amd/agesa/f15/Include/OptionDmi.h
new file mode 100644
index 0000000000..83fb7e9501
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionDmi.h
@@ -0,0 +1,90 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD DMI option API.
+ *
+ * Contains structures and values used to control the DMI option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_DMI_H_
+#define _OPTION_DMI_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef AGESA_STATUS OPTION_DMI_FEATURE (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader,
+  IN OUT   DMI_INFO             **DmiPtr
+  );
+
+typedef AGESA_STATUS OPTION_DMI_RELEASE_BUFFER (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+#define DMI_STRUCT_VERSION  0x01
+
+/// DMI option configuration. Determine the item of structure when compiling.
+typedef struct  {
+  UINT16              OptDmiVersion;      ///< Dmi version.
+  OPTION_DMI_FEATURE  *DmiFeature;        ///< Feature main routine, otherwise dummy.
+  OPTION_DMI_RELEASE_BUFFER *DmiReleaseBuffer; ///< Release buffer
+  UINT16              NumEntries;         ///< Number of entry.
+  VOID                *((*FamilyList)[]); ///< Family service.
+} OPTION_DMI_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif  // _OPTION_DMI_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionDmiInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionDmiInstall.h
new file mode 100644
index 0000000000..a6d48b3734
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionDmiInstall.h
@@ -0,0 +1,215 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: DMI
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_DMI_INSTALL_H_
+#define _OPTION_DMI_INSTALL_H_
+
+#include "cpuLateInit.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#if AGESA_ENTRY_INIT_LATE == TRUE
+  #ifndef OPTION_DMI
+    #error  BLDOPT: Option not defined: "OPTION_DMI"
+  #endif
+  #if OPTION_DMI == TRUE
+    OPTION_DMI_FEATURE          GetDmiInfoMain;
+    OPTION_DMI_RELEASE_BUFFER   ReleaseDmiBuffer;
+    #define USER_DMI_OPTION     &GetDmiInfoMain
+    #define USER_DMI_RELEASE_BUFFER &ReleaseDmiBuffer
+
+    // This additional check keeps AP launch routines from being unnecessarily included
+    // in single socket systems.
+    #if OPTION_MULTISOCKET == TRUE
+      #undef AGESA_ENTRY_LATE_RUN_AP_TASK
+      #define AGESA_ENTRY_LATE_RUN_AP_TASK TRUE
+      #define CPU_DMI_AP_GET_TYPE4_TYPE7 {AP_LATE_TASK_GET_TYPE4_TYPE7, (IMAGE_ENTRY) GetType4Type7Info},
+    #else
+      #define CPU_DMI_AP_GET_TYPE4_TYPE7
+    #endif
+
+    // Family 10
+    #ifdef OPTION_FAMILY10H
+      #if OPTION_FAMILY10H == TRUE
+        extern PROC_FAMILY_TABLE ProcFamily10DmiTable;
+        #define FAM10_DMI_SUPPORT FAM10_ENABLED,
+        #define FAM10_DMI_TABLE &ProcFamily10DmiTable,
+      #else
+        #define FAM10_DMI_SUPPORT
+        #define FAM10_DMI_TABLE
+      #endif
+    #else
+      #define FAM10_DMI_SUPPORT
+      #define FAM10_DMI_TABLE
+    #endif
+
+    // Family 12
+    #ifdef OPTION_FAMILY12H
+      #if OPTION_FAMILY12H == TRUE
+        extern PROC_FAMILY_TABLE ProcFamily12DmiTable;
+        #define FAM12_DMI_SUPPORT FAM12_ENABLED,
+        #define FAM12_DMI_TABLE &ProcFamily12DmiTable,
+      #else
+        #define FAM12_DMI_SUPPORT
+        #define FAM12_DMI_TABLE
+      #endif
+    #else
+      #define FAM12_DMI_SUPPORT
+      #define FAM12_DMI_TABLE
+    #endif
+
+    // Family 14
+    #ifdef OPTION_FAMILY14H
+      #if OPTION_FAMILY14H == TRUE
+        extern PROC_FAMILY_TABLE ProcFamily14DmiTable;
+        #define FAM14_DMI_SUPPORT FAM14_ENABLED,
+        #define FAM14_DMI_TABLE &ProcFamily14DmiTable,
+      #else
+        #define FAM14_DMI_SUPPORT
+        #define FAM14_DMI_TABLE
+      #endif
+    #else
+      #define FAM14_DMI_SUPPORT
+      #define FAM14_DMI_TABLE
+    #endif
+
+    // Family 15
+    #ifdef OPTION_FAMILY15H
+      #if OPTION_FAMILY15H == TRUE
+        #if OPTION_FAMILY15H_OR == TRUE
+          extern PROC_FAMILY_TABLE ProcFamily15OrDmiTable;
+          #define FAM15_OR_DMI_SUPPORT FAM15_OR_ENABLED,
+          #define FAM15_OR_DMI_TABLE &ProcFamily15OrDmiTable,
+        #else
+          #define FAM15_OR_DMI_SUPPORT
+          #define FAM15_OR_DMI_TABLE
+        #endif
+        #if OPTION_FAMILY15H_TN == TRUE
+          extern PROC_FAMILY_TABLE ProcFamily15TnDmiTable;
+          #define FAM15_TN_DMI_SUPPORT FAM15_TN_ENABLED,
+          #define FAM15_TN_DMI_TABLE &ProcFamily15TnDmiTable,
+        #else
+          #define FAM15_TN_DMI_SUPPORT
+          #define FAM15_TN_DMI_TABLE
+        #endif
+      #else
+        #define FAM15_OR_DMI_SUPPORT
+        #define FAM15_OR_DMI_TABLE
+        #define FAM15_TN_DMI_SUPPORT
+        #define FAM15_TN_DMI_TABLE
+      #endif
+    #else
+      #define FAM15_OR_DMI_SUPPORT
+      #define FAM15_OR_DMI_TABLE
+      #define FAM15_TN_DMI_SUPPORT
+      #define FAM15_TN_DMI_TABLE
+    #endif
+
+  #else
+    OPTION_DMI_FEATURE          GetDmiInfoStub;
+    OPTION_DMI_RELEASE_BUFFER   ReleaseDmiBufferStub;
+    #define USER_DMI_OPTION     GetDmiInfoStub
+    #define USER_DMI_RELEASE_BUFFER ReleaseDmiBufferStub
+    #define FAM10_DMI_SUPPORT
+    #define FAM10_DMI_TABLE
+    #define FAM12_DMI_SUPPORT
+    #define FAM12_DMI_TABLE
+    #define FAM14_DMI_SUPPORT
+    #define FAM14_DMI_TABLE
+    #define FAM15_OR_DMI_SUPPORT
+    #define FAM15_OR_DMI_TABLE
+    #define FAM15_TN_DMI_SUPPORT
+    #define FAM15_TN_DMI_TABLE
+    #define CPU_DMI_AP_GET_TYPE4_TYPE7
+  #endif
+#else
+  OPTION_DMI_FEATURE          GetDmiInfoStub;
+  OPTION_DMI_RELEASE_BUFFER   ReleaseDmiBufferStub;
+  #define USER_DMI_OPTION     GetDmiInfoStub
+  #define USER_DMI_RELEASE_BUFFER ReleaseDmiBufferStub
+  #define FAM10_DMI_SUPPORT
+  #define FAM10_DMI_TABLE
+  #define FAM12_DMI_SUPPORT
+  #define FAM12_DMI_TABLE
+  #define FAM14_DMI_SUPPORT
+  #define FAM14_DMI_TABLE
+  #define FAM15_OR_DMI_SUPPORT
+  #define FAM15_OR_DMI_TABLE
+  #define FAM15_TN_DMI_SUPPORT
+  #define FAM15_TN_DMI_TABLE
+  #define CPU_DMI_AP_GET_TYPE4_TYPE7
+#endif
+
+/// DMI supported families enum
+typedef enum {
+  FAM10_DMI_SUPPORT                   ///< Conditionally define F10 support
+  FAM12_DMI_SUPPORT                   ///< Conditionally define F12 support
+  FAM14_DMI_SUPPORT                   ///< Conditionally define F14 support
+  FAM15_OR_DMI_SUPPORT                ///< Conditionally define F15 OR support
+  FAM15_TN_DMI_SUPPORT                ///< Conditionally define F15 TN support
+  NUM_DMI_FAMILIES                    ///< Number of installed families
+} AGESA_DMI_SUPPORTED_FAM;
+
+/*  Declare the Family List. An array of pointers to tables that each describe a family  */
+CONST PROC_FAMILY_TABLE ROMDATA *ProcTables[] = {
+  FAM10_DMI_TABLE
+  FAM12_DMI_TABLE
+  FAM14_DMI_TABLE
+  FAM15_OR_DMI_TABLE
+  FAM15_TN_DMI_TABLE
+  NULL
+};
+
+/*  Declare the instance of the DMI option configuration structure  */
+CONST OPTION_DMI_CONFIGURATION ROMDATA OptionDmiConfiguration = {
+  DMI_STRUCT_VERSION,
+  USER_DMI_OPTION,
+  USER_DMI_RELEASE_BUFFER,
+  NUM_DMI_FAMILIES,
+  (VOID *((*)[])) &ProcTables           // Compiler says array size must match struct decl
+};
+
+#endif  // _OPTION_DMI_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionFamily10hInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionFamily10hInstall.h
new file mode 100644
index 0000000000..7eeea69c9f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionFamily10hInstall.h
@@ -0,0 +1,2058 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of family 10h support
+ *
+ * This file generates the defaults tables for family 10h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 60726 $   @e \$Date: 2011-10-20 17:08:02 -0600 (Thu, 20 Oct 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_FAMILY_10H_INSTALL_H_
+#define _OPTION_FAMILY_10H_INSTALL_H_
+
+/*
+ * Common Family 10h routines
+ */
+extern F_CPU_DISABLE_PSTATE F10DisablePstate;
+extern F_CPU_TRANSITION_PSTATE F10TransitionPstate;
+extern F_CPU_GET_TSC_RATE F10GetTscRate;
+extern F_CPU_GET_NB_FREQ F10GetCurrentNbFrequency;
+extern F_CPU_AP_INITIAL_LAUNCH F10LaunchApCore;
+extern F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE F10GetApMailboxFromHardware;
+extern F_CPU_SET_AP_CORE_NUMBER F10SetApCoreNumber;
+extern F_CPU_GET_AP_CORE_NUMBER F10GetApCoreNumber;
+extern F_CPU_TRANSFER_AP_CORE_NUMBER F10TransferApCoreNumber;
+extern F_CORE_ID_POSITION_IN_INITIAL_APIC_ID F10CpuAmdCoreIdPositionInInitialApicId;
+extern F_CPU_SAVE_FEATURES F10SaveFeatures;
+extern F_CPU_WRITE_FEATURES F10WriteFeatures;
+extern F_CPU_SET_WARM_RESET_FLAG F10SetAgesaWarmResetFlag;
+extern F_CPU_GET_WARM_RESET_FLAG F10GetAgesaWarmResetFlag;
+extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10BrandIdString1;
+extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10BrandIdString2;
+extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10CacheInfo;
+extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10SysPmTable;
+extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10WheaInitData;
+extern F_CPU_SET_CFOH_REG SetF10CacheFlushOnHaltRegister;
+extern F_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO F10GetPlatformTypeSpecificInfo;
+extern F_NEXT_LINK_HAS_HTFPY_FEATS F10NextLinkHasHtPhyFeats;
+extern F_SET_HT_PHY_REGISTER F10SetHtPhyRegister;
+extern F_GET_NEXT_HT_LINK_FEATURES F10GetNextHtLinkFeatures;
+extern CONST REGISTER_TABLE ROMDATA F10PciRegisterTable;
+extern CONST REGISTER_TABLE ROMDATA F10MsrRegisterTable;
+extern CONST REGISTER_TABLE ROMDATA F10HtPhyRegisterTable;
+extern CONST REGISTER_TABLE ROMDATA F10MultiLinkPciRegisterTable;
+extern CONST REGISTER_TABLE ROMDATA F10SingleLinkPciRegisterTable;
+extern CONST REGISTER_TABLE ROMDATA F10WorkaroundsTable;
+extern F_GET_EARLY_INIT_TABLE GetF10EarlyInitOnCoreTable;
+
+
+/*
+ * Install family 10h model 5 support
+ */
+#ifdef OPTION_FAMILY10H_BL
+  #if OPTION_FAMILY10H_BL == TRUE
+    extern CONST REGISTER_TABLE ROMDATA F10RevCPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10RevCMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10RevCHtPhyRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10BlPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10BlMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10BlHtPhyRegisterTable;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10BlMicroCodePatchesStruct;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10BlMicrocodeEquivalenceTable;
+    extern F_CPU_GET_IDD_MAX F10CommonRevCGetProcIddMax;
+    extern F_CPU_GET_NB_PSTATE_INFO F10CommonRevCGetNbPstateInfo;
+    extern F_CPU_GET_MIN_MAX_NB_FREQ F10RevCGetMinMaxNbFrequency;
+    extern F_CPU_IS_NBCOF_INIT_NEEDED F10CommonRevCGetNbCofVidUpdate;
+    extern F_IS_NB_PSTATE_ENABLED F10CommonRevCIsNbPstateEnabled;
+    extern F_CPU_NUMBER_OF_PHYSICAL_CORES F10CommonRevCGetNumberOfPhysicalCores;
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST REGISTER_TABLE ROMDATA *F10BlRegisterTables[] =
+      {
+        #if BASE_FAMILY_PCI == TRUE
+          &F10PciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10SingleLinkPciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10RevCPciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10BlPciRegisterTable,
+        #endif
+        #if BASE_FAMILY_MSR == TRUE
+          &F10MsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F10RevCMsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F10BlMsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10HtPhyRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10RevCHtPhyRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10BlHtPhyRegisterTable,
+        #endif
+        #if BASE_FAMILY_WORKAROUNDS == TRUE
+          &F10WorkaroundsTable,
+        #endif
+        // the end.
+        NULL
+      };
+    #endif
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F10BlTableEntryTypeDescriptors[] =
+      {
+        {MsrRegister, SetRegisterForMsrEntry},
+        {PciRegister, SetRegisterForPciEntry},
+        {FamSpecificWorkaround, SetRegisterForFamSpecificWorkaroundEntry},
+        {HtPhyRegister, SetRegisterForHtPhyEntry},
+        {HtPhyRangeRegister, SetRegisterForHtPhyRangeEntry},
+        {DeemphasisRegister, SetRegisterForDeemphasisEntry},
+        {ProfileFixup, SetRegisterForPerformanceProfileEntry},
+        {HtHostPciRegister, SetRegisterForHtHostEntry},
+        {HtTokenPciRegister, (PF_DO_TABLE_ENTRY)CommonVoid},
+        {CoreCountsPciRegister, SetRegisterForCoreCountsPerformanceEntry},
+        {ProcCountsPciRegister, SetRegisterForProcessorCountsEntry},
+        {HtFeatPciRegister, SetRegisterForHtFeaturePciEntry},
+        {HtPhyProfileRegister, SetRegisterForHtPhyProfileEntry},
+        // End
+        {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+      };
+    #endif
+
+    CONST CPU_SPECIFIC_SERVICES ROMDATA cpuF10BlServices =
+    {
+      0,
+      #if DISABLE_PSTATE == TRUE
+        F10DisablePstate,
+      #else
+        (PF_CPU_DISABLE_PSTATE) CommonAssert,
+      #endif
+      #if TRANSITION_PSTATE == TRUE
+        F10TransitionPstate,
+      #else
+        (PF_CPU_TRANSITION_PSTATE) CommonAssert,
+      #endif
+      #if PROC_IDD_MAX == TRUE
+        F10CommonRevCGetProcIddMax,
+      #else
+        (PF_CPU_GET_IDD_MAX) CommonAssert,
+      #endif
+      #if GET_TSC_RATE == TRUE
+        F10GetTscRate,
+      #else
+        (PF_CPU_GET_TSC_RATE) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10GetCurrentNbFrequency,
+      #else
+        (PF_CPU_GET_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10RevCGetMinMaxNbFrequency,
+      #else
+        (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10CommonRevCGetNbPstateInfo,
+      #else
+        (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert,
+      #endif
+      #if IS_NBCOF_INIT_NEEDED == TRUE
+        F10CommonRevCGetNbCofVidUpdate,
+      #else
+        (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonAssert,
+      #endif
+      #if GET_NB_IDD_MAX == TRUE
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #else
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #endif
+      #if AP_INITIAL_LAUNCH == TRUE
+        F10LaunchApCore,
+      #else
+        (PF_CPU_AP_INITIAL_LAUNCH) CommonAssert,
+      #endif
+      #if (BRAND_STRING1 == TRUE) || (BRAND_STRING2 == TRUE)
+        F10CommonRevCGetNumberOfPhysicalCores,
+      #else
+        (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonAssert,
+      #endif
+      #if GET_AP_MAILBOX_FROM_HW == TRUE
+        F10GetApMailboxFromHardware,
+      #else
+        (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert,
+      #endif
+      #if SET_AP_CORE_NUMBER == TRUE
+        F10SetApCoreNumber,
+      #else
+        (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if GET_AP_CORE_NUMBER == TRUE
+        F10GetApCoreNumber,
+      #else
+        (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if TRANSFER_AP_CORE_NUMBER == TRUE
+        F10TransferApCoreNumber,
+      #else
+        (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if ID_POSITION_INITIAL_APICID == TRUE
+        F10CpuAmdCoreIdPositionInInitialApicId,
+      #else
+        (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonAssert,
+      #endif
+      #if SAVE_FEATURES == TRUE
+        F10SaveFeatures,
+      #else
+        (PF_CPU_SAVE_FEATURES) CommonAssert,
+      #endif
+      #if WRITE_FEATURES == TRUE
+        F10WriteFeatures,
+      #else
+        (PF_CPU_WRITE_FEATURES) CommonAssert,
+      #endif
+      #if SET_WARM_RESET_FLAG == TRUE
+        F10SetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_SET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if GET_WARM_RESET_FLAG == TRUE
+        F10GetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_GET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if BRAND_STRING1 == TRUE
+        GetF10BrandIdString1,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if BRAND_STRING2 == TRUE
+        GetF10BrandIdString2,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES == TRUE
+        GetF10BlMicroCodePatchesStruct,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES_EQUIVALENCE_TABLE == TRUE
+        GetF10BlMicrocodeEquivalenceTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_CACHE_INFO == TRUE
+        GetF10CacheInfo,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_SYSTEM_PM_TABLE == TRUE
+        GetF10SysPmTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_WHEA_INIT == TRUE
+        GetF10WheaInitData,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PLATFORM_TYPE_SPECIFIC_INFO == TRUE
+        F10GetPlatformTypeSpecificInfo,
+      #else
+        (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonAssert,
+      #endif
+      #if IS_NB_PSTATE_ENABLED == TRUE
+        F10CommonRevCIsNbPstateEnabled,
+      #else
+        (PF_IS_NB_PSTATE_ENABLED) CommonAssert,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F10NextLinkHasHtPhyFeats,
+      #else
+        (PF_NEXT_LINK_HAS_HTFPY_FEATS) CommonReturnFalse,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F10SetHtPhyRegister,
+      #else
+        (PF_SET_HT_PHY_REGISTER) CommonAssert,
+      #endif
+      #if BASE_FAMILY_PCI == TRUE
+        F10GetNextHtLinkFeatures,
+      #else
+        (PF_GET_NEXT_HT_LINK_FEATURES) CommonReturnFalse,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (REGISTER_TABLE **) F10BlRegisterTables,
+      #else
+        NULL,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (TABLE_ENTRY_TYPE_DESCRIPTOR *) F10BlTableEntryTypeDescriptors,
+      #else
+        NULL,
+      #endif
+      NULL,
+      NULL,
+      InitCacheDisabled,
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        GetF10EarlyInitOnCoreTable
+      #else
+        (PF_GET_EARLY_INIT_TABLE) CommonVoid
+      #endif
+    };
+
+    #define BL_SOCKETS 1
+    #define BL_MODULES 1
+    #define BL_RECOVERY_SOCKETS 1
+    #define BL_RECOVERY_MODULES 1
+    extern F_CPU_GET_SUBFAMILY_ID_ARRAY GetF10BlLogicalIdAndRev;
+    #define OPT_F10_BL_ID (PF_CPU_GET_SUBFAMILY_ID_ARRAY) GetF10BlLogicalIdAndRev,
+    #ifndef ADVCFG_PLATFORM_SOCKETS
+      #define ADVCFG_PLATFORM_SOCKETS BL_SOCKETS
+    #else
+      #if ADVCFG_PLATFORM_SOCKETS < BL_SOCKETS
+        #undef ADVCFG_PLATFORM_SOCKETS
+        #define ADVCFG_PLATFORM_SOCKETS BL_SOCKETS
+      #endif
+    #endif
+    #ifndef ADVCFG_PLATFORM_MODULES
+      #define ADVCFG_PLATFORM_MODULES BL_MODULES
+    #else
+      #if ADVCFG_PLATFORM_MODULES < BL_MODULES
+        #undef ADVCFG_PLATFORM_MODULES
+        #define ADVCFG_PLATFORM_MODULES BL_MODULES
+      #endif
+    #endif
+
+    #if GET_PATCHES == TRUE
+      #define F10_BL_UCODE_C6
+      #define F10_BL_UCODE_C8
+
+      // If a patch is required for recovery mode to function properly, add a
+      // conditional for AGESA_ENTRY_INIT_RECOVERY, and pull it in.
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        #if OPTION_AM3_SOCKET_SUPPORT == TRUE
+          extern  CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000c6;
+          #undef F10_BL_UCODE_C6
+          #define F10_BL_UCODE_C6 &CpuF10MicrocodePatch010000c6,
+        #endif
+        #if (OPTION_S1G4_SOCKET_SUPPORT == TRUE) || (OPTION_AM3_SOCKET_SUPPORT == TRUE) || (OPTION_ASB2_SOCKET_SUPPORT == TRUE)
+          extern  CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000c8;
+          #undef F10_BL_UCODE_C8
+          #define F10_BL_UCODE_C8 &CpuF10MicrocodePatch010000c8,
+        #endif
+      #endif
+
+      CONST MICROCODE_PATCHES ROMDATA *CpuF10BlMicroCodePatchArray[] =
+      {
+        F10_BL_UCODE_C6
+        F10_BL_UCODE_C8
+        NULL
+      };
+
+      CONST UINT8 ROMDATA CpuF10BlNumberOfMicrocodePatches = (UINT8) ((sizeof (CpuF10BlMicroCodePatchArray) / sizeof (CpuF10BlMicroCodePatchArray[0])) - 1);
+    #endif
+
+    #define OPT_F10_BL_CPU {AMD_FAMILY_10_BL, &cpuF10BlServices},
+  #else
+    #define OPT_F10_BL_CPU
+    #define OPT_F10_BL_ID
+  #endif
+#else
+  #define OPT_F10_BL_CPU
+  #define OPT_F10_BL_ID
+#endif
+
+/*
+ * Install family 10h model 6 support
+ */
+#ifdef OPTION_FAMILY10H_DA
+  #if OPTION_FAMILY10H_DA == TRUE
+    extern CONST REGISTER_TABLE ROMDATA F10RevCPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10RevCMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10RevCHtPhyRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10DaPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10DaMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10DaHtPhyRegisterTable;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10DaMicroCodePatchesStruct;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10DaMicrocodeEquivalenceTable;
+    extern F_CPU_GET_IDD_MAX F10CommonRevCGetProcIddMax;
+    extern F_CPU_GET_NB_PSTATE_INFO F10CommonRevCGetNbPstateInfo;
+    extern F_CPU_GET_MIN_MAX_NB_FREQ F10RevCGetMinMaxNbFrequency;
+    extern F_CPU_IS_NBCOF_INIT_NEEDED F10CommonRevCGetNbCofVidUpdate;
+    extern F_CPU_SET_CFOH_REG SetF10DaCacheFlushOnHaltRegister;
+    extern F_IS_NB_PSTATE_ENABLED F10CommonRevCIsNbPstateEnabled;
+    extern F_CPU_NUMBER_OF_PHYSICAL_CORES F10CommonRevCGetNumberOfPhysicalCores;
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST REGISTER_TABLE ROMDATA *F10DaRegisterTables[] =
+      {
+        #if BASE_FAMILY_PCI == TRUE
+          &F10PciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10SingleLinkPciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10RevCPciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10DaPciRegisterTable,
+        #endif
+        #if BASE_FAMILY_MSR == TRUE
+          &F10MsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F10RevCMsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F10DaMsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10HtPhyRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10RevCHtPhyRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10DaHtPhyRegisterTable,
+        #endif
+        #if BASE_FAMILY_WORKAROUNDS == TRUE
+          &F10WorkaroundsTable,
+        #endif
+        // the end.
+        NULL
+      };
+    #endif
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F10DaTableEntryTypeDescriptors[] =
+      {
+        {MsrRegister, SetRegisterForMsrEntry},
+        {PciRegister, SetRegisterForPciEntry},
+        {FamSpecificWorkaround, SetRegisterForFamSpecificWorkaroundEntry},
+        {HtPhyRegister, SetRegisterForHtPhyEntry},
+        {HtPhyRangeRegister, SetRegisterForHtPhyRangeEntry},
+        {DeemphasisRegister, SetRegisterForDeemphasisEntry},
+        {ProfileFixup, SetRegisterForPerformanceProfileEntry},
+        {HtHostPciRegister, SetRegisterForHtHostEntry},
+        {HtTokenPciRegister, (PF_DO_TABLE_ENTRY)CommonVoid},
+        {CoreCountsPciRegister, SetRegisterForCoreCountsPerformanceEntry},
+        {ProcCountsPciRegister, SetRegisterForProcessorCountsEntry},
+        {HtFeatPciRegister, SetRegisterForHtFeaturePciEntry},
+        {HtPhyProfileRegister, SetRegisterForHtPhyProfileEntry},
+        // End
+        {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+      };
+    #endif
+
+    CONST CPU_SPECIFIC_SERVICES ROMDATA cpuF10DaServices =
+    {
+      0,
+      #if DISABLE_PSTATE == TRUE
+        F10DisablePstate,
+      #else
+        (PF_CPU_DISABLE_PSTATE) CommonAssert,
+      #endif
+      #if TRANSITION_PSTATE == TRUE
+        F10TransitionPstate,
+      #else
+        (PF_CPU_TRANSITION_PSTATE) CommonAssert,
+      #endif
+      #if PROC_IDD_MAX == TRUE
+        F10CommonRevCGetProcIddMax,
+      #else
+        (PF_CPU_GET_IDD_MAX) CommonAssert,
+      #endif
+      #if GET_TSC_RATE == TRUE
+        F10GetTscRate,
+      #else
+        (PF_CPU_GET_TSC_RATE) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10GetCurrentNbFrequency,
+      #else
+        (PF_CPU_GET_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10RevCGetMinMaxNbFrequency,
+      #else
+        (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10CommonRevCGetNbPstateInfo,
+      #else
+        (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert,
+      #endif
+      #if IS_NBCOF_INIT_NEEDED == TRUE
+        F10CommonRevCGetNbCofVidUpdate,
+      #else
+        (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonAssert,
+      #endif
+      #if GET_NB_IDD_MAX == TRUE
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #else
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #endif
+      #if AP_INITIAL_LAUNCH == TRUE
+        F10LaunchApCore,
+      #else
+        (PF_CPU_AP_INITIAL_LAUNCH) CommonAssert,
+      #endif
+      #if (BRAND_STRING1 == TRUE) || (BRAND_STRING2 == TRUE)
+        F10CommonRevCGetNumberOfPhysicalCores,
+      #else
+        (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonAssert,
+      #endif
+      #if GET_AP_MAILBOX_FROM_HW == TRUE
+        F10GetApMailboxFromHardware,
+      #else
+        (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert,
+      #endif
+      #if SET_AP_CORE_NUMBER == TRUE
+        F10SetApCoreNumber,
+      #else
+        (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if GET_AP_CORE_NUMBER == TRUE
+        F10GetApCoreNumber,
+      #else
+        (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if TRANSFER_AP_CORE_NUMBER == TRUE
+        F10TransferApCoreNumber,
+      #else
+        (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if ID_POSITION_INITIAL_APICID == TRUE
+        F10CpuAmdCoreIdPositionInInitialApicId,
+      #else
+        (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonAssert,
+      #endif
+      #if SAVE_FEATURES == TRUE
+        F10SaveFeatures,
+      #else
+        (PF_CPU_SAVE_FEATURES) CommonAssert,
+      #endif
+      #if WRITE_FEATURES == TRUE
+        F10WriteFeatures,
+      #else
+        (PF_CPU_WRITE_FEATURES) CommonAssert,
+      #endif
+      #if SET_WARM_RESET_FLAG == TRUE
+        F10SetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_SET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if GET_WARM_RESET_FLAG == TRUE
+        F10GetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_GET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if BRAND_STRING1 == TRUE
+        GetF10BrandIdString1,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if BRAND_STRING2 == TRUE
+        GetF10BrandIdString2,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES == TRUE
+        GetF10DaMicroCodePatchesStruct,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES_EQUIVALENCE_TABLE == TRUE
+        GetF10DaMicrocodeEquivalenceTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_CACHE_INFO == TRUE
+        GetF10CacheInfo,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_SYSTEM_PM_TABLE == TRUE
+        GetF10SysPmTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_WHEA_INIT == TRUE
+        GetF10WheaInitData,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PLATFORM_TYPE_SPECIFIC_INFO == TRUE
+        F10GetPlatformTypeSpecificInfo,
+      #else
+        (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonAssert,
+      #endif
+      #if IS_NB_PSTATE_ENABLED == TRUE
+        F10CommonRevCIsNbPstateEnabled,
+      #else
+        (PF_IS_NB_PSTATE_ENABLED) CommonAssert,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F10NextLinkHasHtPhyFeats,
+      #else
+        (PF_NEXT_LINK_HAS_HTFPY_FEATS) CommonReturnFalse,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F10SetHtPhyRegister,
+      #else
+        (PF_SET_HT_PHY_REGISTER) CommonAssert,
+      #endif
+      #if BASE_FAMILY_PCI == TRUE
+        F10GetNextHtLinkFeatures,
+      #else
+        (PF_GET_NEXT_HT_LINK_FEATURES) CommonReturnFalse,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (REGISTER_TABLE **) F10DaRegisterTables,
+      #else
+        NULL,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (TABLE_ENTRY_TYPE_DESCRIPTOR *) F10DaTableEntryTypeDescriptors,
+      #else
+        NULL,
+      #endif
+      NULL,
+      NULL,
+      InitCacheDisabled,
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        GetF10EarlyInitOnCoreTable
+      #else
+        (PF_GET_EARLY_INIT_TABLE) CommonVoid
+      #endif
+    };
+
+    #define DA_SOCKETS 1
+    #define DA_MODULES 1
+    #define DA_RECOVERY_SOCKETS 1
+    #define DA_RECOVERY_MODULES 1
+    extern F_CPU_GET_SUBFAMILY_ID_ARRAY GetF10DaLogicalIdAndRev;
+    #define OPT_F10_DA_ID (PF_CPU_GET_SUBFAMILY_ID_ARRAY) GetF10DaLogicalIdAndRev,
+    #ifndef ADVCFG_PLATFORM_SOCKETS
+      #define ADVCFG_PLATFORM_SOCKETS DA_SOCKETS
+    #else
+      #if ADVCFG_PLATFORM_SOCKETS < DA_SOCKETS
+        #undef ADVCFG_PLATFORM_SOCKETS
+        #define ADVCFG_PLATFORM_SOCKETS DA_SOCKETS
+      #endif
+    #endif
+    #ifndef ADVCFG_PLATFORM_MODULES
+      #define ADVCFG_PLATFORM_MODULES DA_MODULES
+    #else
+      #if ADVCFG_PLATFORM_MODULES < DA_MODULES
+        #undef ADVCFG_PLATFORM_MODULES
+        #define ADVCFG_PLATFORM_MODULES DA_MODULES
+      #endif
+    #endif
+
+    #if GET_PATCHES == TRUE
+      #define F10_DA_UCODE_C7
+      #define F10_DA_UCODE_C8
+
+      // If a patch is required for recovery mode to function properly, add a
+      // conditional for AGESA_ENTRY_INIT_RECOVERY, and pull it in.
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        #if (OPTION_S1G3_SOCKET_SUPPORT == TRUE) || (OPTION_AM3_SOCKET_SUPPORT == TRUE)
+          extern  CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000c7;
+          #undef F10_DA_UCODE_C7
+          #define F10_DA_UCODE_C7 &CpuF10MicrocodePatch010000c7,
+        #endif
+        #if (OPTION_S1G4_SOCKET_SUPPORT == TRUE) || (OPTION_AM3_SOCKET_SUPPORT == TRUE) || (OPTION_ASB2_SOCKET_SUPPORT == TRUE)
+          extern  CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000c8;
+          #undef F10_DA_UCODE_C8
+          #define F10_DA_UCODE_C8 &CpuF10MicrocodePatch010000c8,
+        #endif
+      #endif
+
+      CONST MICROCODE_PATCHES ROMDATA *CpuF10DaMicroCodePatchArray[] =
+      {
+        F10_DA_UCODE_C7
+        F10_DA_UCODE_C8
+        NULL
+      };
+
+      CONST UINT8 ROMDATA CpuF10DaNumberOfMicrocodePatches = (UINT8) ((sizeof (CpuF10DaMicroCodePatchArray) / sizeof (CpuF10DaMicroCodePatchArray[0])) - 1);
+    #endif
+
+    #define OPT_F10_DA_CPU {AMD_FAMILY_10_DA, &cpuF10DaServices},
+  #else
+    #define OPT_F10_DA_CPU
+    #define OPT_F10_DA_ID
+  #endif
+#else
+  #define OPT_F10_DA_CPU
+  #define OPT_F10_DA_ID
+#endif
+
+/*
+ * Install family 10h models 8 & 9 support
+ */
+#ifdef OPTION_FAMILY10H_HY
+  #if OPTION_FAMILY10H_HY == TRUE
+    extern CONST REGISTER_TABLE ROMDATA F10HyPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10HyMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10HyHtPhyRegisterTable;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10HyMicroCodePatchesStruct;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10HyMicrocodeEquivalenceTable;
+    extern F_CPU_GET_IDD_MAX F10CommonRevDGetProcIddMax;
+    extern F_CPU_GET_NB_PSTATE_INFO F10CommonRevDGetNbPstateInfo;
+    extern F_CPU_GET_MIN_MAX_NB_FREQ F10RevDGetMinMaxNbFrequency;
+    extern F_CPU_IS_NBCOF_INIT_NEEDED F10CommonRevDGetNbCofVidUpdate;
+    extern CONST PACKAGE_HTLINK_MAP_ITEM ROMDATA HtFam10RevDPackageLinkMap[];
+    extern F_CPU_NUMBER_OF_PHYSICAL_CORES F10CommonRevDGetNumberOfPhysicalCores;
+    extern F_GET_EARLY_INIT_TABLE GetF10HyEarlyInitOnCoreTable;
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST REGISTER_TABLE ROMDATA *F10HyRegisterTables[] =
+      {
+        #if BASE_FAMILY_PCI == TRUE
+          &F10PciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10MultiLinkPciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10HyPciRegisterTable,
+        #endif
+        #if BASE_FAMILY_MSR == TRUE
+          &F10MsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F10HyMsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10HtPhyRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10HyHtPhyRegisterTable,
+        #endif
+        #if BASE_FAMILY_WORKAROUNDS == TRUE
+          &F10WorkaroundsTable,
+        #endif
+        // the end.
+        NULL
+      };
+    #endif
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F10HyTableEntryTypeDescriptors[] =
+      {
+        {MsrRegister, SetRegisterForMsrEntry},
+        {PciRegister, SetRegisterForPciEntry},
+        {FamSpecificWorkaround, SetRegisterForFamSpecificWorkaroundEntry},
+        {HtPhyRegister, SetRegisterForHtPhyEntry},
+        {HtPhyRangeRegister, SetRegisterForHtPhyRangeEntry},
+        {DeemphasisRegister, SetRegisterForDeemphasisEntry},
+        {HtPhyFreqRegister, SetRegisterForHtPhyFreqEntry},
+        {ProfileFixup, SetRegisterForPerformanceProfileEntry},
+        {HtHostPciRegister, SetRegisterForHtHostEntry},
+        {HtTokenPciRegister, SetRegisterForHtLinkTokenEntry},
+        {CoreCountsPciRegister, SetRegisterForCoreCountsPerformanceEntry},
+        {ProcCountsPciRegister, SetRegisterForProcessorCountsEntry},
+        {TokenPciRegister, SetRegisterForTokenPciEntry},
+        {HtFeatPciRegister, SetRegisterForHtFeaturePciEntry},
+        {HtLinkPciRegister, SetRegisterForHtLinkPciEntry},
+        // End
+        {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+      };
+    #endif
+
+    CONST CPU_SPECIFIC_SERVICES ROMDATA cpuF10HyServices =
+    {
+      0,
+      #if DISABLE_PSTATE == TRUE
+        F10DisablePstate,
+      #else
+        (PF_CPU_DISABLE_PSTATE) CommonAssert,
+      #endif
+      #if TRANSITION_PSTATE == TRUE
+        F10TransitionPstate,
+      #else
+        (PF_CPU_TRANSITION_PSTATE) CommonAssert,
+      #endif
+      #if PROC_IDD_MAX == TRUE
+        F10CommonRevDGetProcIddMax,
+      #else
+        (PF_CPU_GET_IDD_MAX) CommonAssert,
+      #endif
+      #if GET_TSC_RATE == TRUE
+        F10GetTscRate,
+      #else
+        (PF_CPU_GET_TSC_RATE) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10GetCurrentNbFrequency,
+      #else
+        (PF_CPU_GET_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10RevDGetMinMaxNbFrequency,
+      #else
+        (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10CommonRevDGetNbPstateInfo,
+      #else
+        (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert,
+      #endif
+      #if IS_NBCOF_INIT_NEEDED == TRUE
+        F10CommonRevDGetNbCofVidUpdate,
+      #else
+        (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonAssert,
+      #endif
+      #if GET_NB_IDD_MAX == TRUE
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #else
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #endif
+      #if AP_INITIAL_LAUNCH == TRUE
+        F10LaunchApCore,
+      #else
+        (PF_CPU_AP_INITIAL_LAUNCH) CommonAssert,
+      #endif
+      #if (BRAND_STRING1 == TRUE) || (BRAND_STRING2 == TRUE)
+        F10CommonRevDGetNumberOfPhysicalCores,
+      #else
+        (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonAssert,
+      #endif
+      #if GET_AP_MAILBOX_FROM_HW == TRUE
+        F10GetApMailboxFromHardware,
+      #else
+        (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert,
+      #endif
+      #if SET_AP_CORE_NUMBER == TRUE
+        F10SetApCoreNumber,
+      #else
+        (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if GET_AP_CORE_NUMBER == TRUE
+        F10GetApCoreNumber,
+      #else
+        (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if TRANSFER_AP_CORE_NUMBER == TRUE
+        F10TransferApCoreNumber,
+      #else
+        (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if ID_POSITION_INITIAL_APICID == TRUE
+        F10CpuAmdCoreIdPositionInInitialApicId,
+      #else
+        (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonAssert,
+      #endif
+      #if SAVE_FEATURES == TRUE
+        F10SaveFeatures,
+      #else
+        (PF_CPU_SAVE_FEATURES) CommonAssert,
+      #endif
+      #if WRITE_FEATURES == TRUE
+        F10WriteFeatures,
+      #else
+        (PF_CPU_WRITE_FEATURES) CommonAssert,
+      #endif
+      #if SET_WARM_RESET_FLAG == TRUE
+        F10SetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_SET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if GET_WARM_RESET_FLAG == TRUE
+        F10GetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_GET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if BRAND_STRING1 == TRUE
+        GetF10BrandIdString1,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if BRAND_STRING2 == TRUE
+        GetF10BrandIdString2,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES == TRUE
+        GetF10HyMicroCodePatchesStruct,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES_EQUIVALENCE_TABLE == TRUE
+        GetF10HyMicrocodeEquivalenceTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_CACHE_INFO == TRUE
+        GetF10CacheInfo,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_SYSTEM_PM_TABLE == TRUE
+        GetF10SysPmTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_WHEA_INIT == TRUE
+        GetF10WheaInitData,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PLATFORM_TYPE_SPECIFIC_INFO == TRUE
+        F10GetPlatformTypeSpecificInfo,
+      #else
+        (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonAssert,
+      #endif
+      #if IS_NB_PSTATE_ENABLED == TRUE
+        (PF_IS_NB_PSTATE_ENABLED) CommonReturnFalse,
+      #else
+        (PF_IS_NB_PSTATE_ENABLED) CommonAssert,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F10NextLinkHasHtPhyFeats,
+      #else
+        (PF_NEXT_LINK_HAS_HTFPY_FEATS) CommonReturnFalse,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F10SetHtPhyRegister,
+      #else
+        (PF_SET_HT_PHY_REGISTER) CommonAssert,
+      #endif
+      #if BASE_FAMILY_PCI == TRUE
+        F10GetNextHtLinkFeatures,
+      #else
+        (PF_GET_NEXT_HT_LINK_FEATURES) CommonReturnFalse,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (REGISTER_TABLE **) F10HyRegisterTables,
+      #else
+        NULL,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (TABLE_ENTRY_TYPE_DESCRIPTOR *) F10HyTableEntryTypeDescriptors,
+      #else
+        NULL,
+      #endif
+      #if MODEL_SPECIFIC_HT_PCI == TRUE
+        (PACKAGE_HTLINK_MAP) &HtFam10RevDPackageLinkMap,
+      #else
+        NULL,
+      #endif
+      NULL,
+      InitCacheDisabled,
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        #if OPTION_C32_SOCKET_SUPPORT == TRUE
+          GetF10HyEarlyInitOnCoreTable
+        #else
+          GetF10EarlyInitOnCoreTable
+        #endif
+      #else
+        (PF_GET_EARLY_INIT_TABLE) CommonVoid
+      #endif
+    };
+
+    #define HY_SOCKETS 8
+    #if (OPTION_G34_SOCKET_SUPPORT == TRUE)
+      #define HY_MODULES 2
+    #else
+      #define HY_MODULES 1
+    #endif
+    #define HY_RECOVERY_SOCKETS 1
+    #define HY_RECOVERY_MODULES 1
+    extern F_CPU_GET_SUBFAMILY_ID_ARRAY GetF10HyLogicalIdAndRev;
+    #define OPT_F10_HY_ID (PF_CPU_GET_SUBFAMILY_ID_ARRAY) GetF10HyLogicalIdAndRev,
+    #ifndef ADVCFG_PLATFORM_SOCKETS
+      #define ADVCFG_PLATFORM_SOCKETS HY_SOCKETS
+    #else
+      #if ADVCFG_PLATFORM_SOCKETS < HY_SOCKETS
+        #undef ADVCFG_PLATFORM_SOCKETS
+        #define ADVCFG_PLATFORM_SOCKETS HY_SOCKETS
+      #endif
+    #endif
+    #ifndef ADVCFG_PLATFORM_MODULES
+      #define ADVCFG_PLATFORM_MODULES HY_MODULES
+    #else
+      #if ADVCFG_PLATFORM_MODULES < HY_MODULES
+        #undef ADVCFG_PLATFORM_MODULES
+        #define ADVCFG_PLATFORM_MODULES HY_MODULES
+      #endif
+    #endif
+
+    #if GET_PATCHES == TRUE
+      #define F10_HY_UCODE_D9
+      #define F10_HY_UCODE_C5
+
+      // If a patch is required for recovery mode to function properly, add a
+      // conditional for AGESA_ENTRY_INIT_RECOVERY, and pull it in.
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        #if OPTION_C32_SOCKET_SUPPORT == TRUE
+          extern  CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000c5;
+          #undef F10_HY_UCODE_C5
+          #define F10_HY_UCODE_C5 &CpuF10MicrocodePatch010000c5,
+        #endif
+        #if (OPTION_C32_SOCKET_SUPPORT == TRUE) || (OPTION_G34_SOCKET_SUPPORT == TRUE)
+          extern  CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000d9;
+          #undef F10_HY_UCODE_D9
+          #define F10_HY_UCODE_D9 &CpuF10MicrocodePatch010000d9,
+        #endif
+      #endif
+
+      CONST MICROCODE_PATCHES ROMDATA *CpuF10HyMicroCodePatchArray[] =
+      {
+        F10_HY_UCODE_D9
+        F10_HY_UCODE_C5
+        NULL
+      };
+
+      CONST UINT8 ROMDATA CpuF10HyNumberOfMicrocodePatches = (UINT8) ((sizeof (CpuF10HyMicroCodePatchArray) / sizeof (CpuF10HyMicroCodePatchArray[0])) - 1);
+    #endif
+
+    #define OPT_F10_HY_CPU {AMD_FAMILY_10_HY, &cpuF10HyServices},
+  #else
+    #define OPT_F10_HY_CPU
+    #define OPT_F10_HY_ID
+  #endif
+#else
+  #define OPT_F10_HY_CPU
+  #define OPT_F10_HY_ID
+#endif
+
+/*
+ * Install family 10h model 10 support
+ */
+#ifdef OPTION_FAMILY10H_PH
+  #if OPTION_FAMILY10H_PH == TRUE
+    extern CONST REGISTER_TABLE ROMDATA F10RevEPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10RevEMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10RevEHtPhyRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10PhPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10PhMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10PhHtPhyRegisterTable;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10PhMicroCodePatchesStruct;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10PhMicrocodeEquivalenceTable;
+    extern F_CPU_GET_IDD_MAX F10CommonRevEGetProcIddMax;
+    extern F_CPU_GET_NB_PSTATE_INFO F10CommonRevEGetNbPstateInfo;
+    extern F_CPU_GET_MIN_MAX_NB_FREQ F10RevEGetMinMaxNbFrequency;
+    extern F_CPU_IS_NBCOF_INIT_NEEDED F10CommonRevEGetNbCofVidUpdate;
+    extern F_CPU_NUMBER_OF_PHYSICAL_CORES F10CommonRevEGetNumberOfPhysicalCores;
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST REGISTER_TABLE ROMDATA *F10PhRegisterTables[] =
+      {
+        #if BASE_FAMILY_PCI == TRUE
+          &F10PciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10SingleLinkPciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10RevEPciRegisterTable,
+        #endif
+        #if BASE_FAMILY_MSR == TRUE
+          &F10MsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F10RevEMsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10HtPhyRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10RevEHtPhyRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10PhHtPhyRegisterTable,
+        #endif
+        #if BASE_FAMILY_WORKAROUNDS == TRUE
+          &F10WorkaroundsTable,
+        #endif
+        // the end.
+        NULL
+      };
+    #endif
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F10PhTableEntryTypeDescriptors[] =
+      {
+        {MsrRegister, SetRegisterForMsrEntry},
+        {PciRegister, SetRegisterForPciEntry},
+        {FamSpecificWorkaround, SetRegisterForFamSpecificWorkaroundEntry},
+        {HtPhyRegister, SetRegisterForHtPhyEntry},
+        {HtPhyRangeRegister, SetRegisterForHtPhyRangeEntry},
+        {DeemphasisRegister, SetRegisterForDeemphasisEntry},
+        {ProfileFixup, SetRegisterForPerformanceProfileEntry},
+        {HtHostPciRegister, SetRegisterForHtHostEntry},
+        {HtTokenPciRegister, (PF_DO_TABLE_ENTRY)CommonVoid},
+        {CoreCountsPciRegister, SetRegisterForCoreCountsPerformanceEntry},
+        {ProcCountsPciRegister, SetRegisterForProcessorCountsEntry},
+        {HtFeatPciRegister, SetRegisterForHtFeaturePciEntry},
+        {HtPhyProfileRegister, SetRegisterForHtPhyProfileEntry},
+        // End
+        {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+      };
+    #endif
+
+    CONST CPU_SPECIFIC_SERVICES ROMDATA cpuF10PhServices =
+    {
+      0,
+      #if DISABLE_PSTATE == TRUE
+        F10DisablePstate,
+      #else
+        (PF_CPU_DISABLE_PSTATE) CommonAssert,
+      #endif
+      #if TRANSITION_PSTATE == TRUE
+        F10TransitionPstate,
+      #else
+        (PF_CPU_TRANSITION_PSTATE) CommonAssert,
+      #endif
+      #if PROC_IDD_MAX == TRUE
+        F10CommonRevEGetProcIddMax,
+      #else
+        (PF_CPU_GET_IDD_MAX) CommonAssert,
+      #endif
+      #if GET_TSC_RATE == TRUE
+        F10GetTscRate,
+      #else
+        (PF_CPU_GET_TSC_RATE) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10GetCurrentNbFrequency,
+      #else
+        (PF_CPU_GET_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10RevEGetMinMaxNbFrequency,
+      #else
+        (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10CommonRevEGetNbPstateInfo,
+      #else
+        (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert,
+      #endif
+      #if IS_NBCOF_INIT_NEEDED == TRUE
+        F10CommonRevEGetNbCofVidUpdate,
+      #else
+        (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonAssert,
+      #endif
+      #if GET_NB_IDD_MAX == TRUE
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #else
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #endif
+      #if AP_INITIAL_LAUNCH == TRUE
+        F10LaunchApCore,
+      #else
+        (PF_CPU_AP_INITIAL_LAUNCH) CommonAssert,
+      #endif
+      #if (BRAND_STRING1 == TRUE) || (BRAND_STRING2 == TRUE)
+        F10CommonRevEGetNumberOfPhysicalCores,
+      #else
+        (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonAssert,
+      #endif
+      #if GET_AP_MAILBOX_FROM_HW == TRUE
+        F10GetApMailboxFromHardware,
+      #else
+        (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert,
+      #endif
+      #if SET_AP_CORE_NUMBER == TRUE
+        F10SetApCoreNumber,
+      #else
+        (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if GET_AP_CORE_NUMBER == TRUE
+        F10GetApCoreNumber,
+      #else
+        (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if TRANSFER_AP_CORE_NUMBER == TRUE
+        F10TransferApCoreNumber,
+      #else
+        (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if ID_POSITION_INITIAL_APICID == TRUE
+        F10CpuAmdCoreIdPositionInInitialApicId,
+      #else
+        (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonAssert,
+      #endif
+      #if SAVE_FEATURES == TRUE
+        F10SaveFeatures,
+      #else
+        (PF_CPU_SAVE_FEATURES) CommonAssert,
+      #endif
+      #if WRITE_FEATURES == TRUE
+        F10WriteFeatures,
+      #else
+        (PF_CPU_WRITE_FEATURES) CommonAssert,
+      #endif
+      #if SET_WARM_RESET_FLAG == TRUE
+        F10SetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_SET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if GET_WARM_RESET_FLAG == TRUE
+        F10GetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_GET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if BRAND_STRING1 == TRUE
+        GetF10BrandIdString1,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if BRAND_STRING2 == TRUE
+        GetF10BrandIdString2,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES == TRUE
+        GetF10PhMicroCodePatchesStruct,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES_EQUIVALENCE_TABLE == TRUE
+        GetF10PhMicrocodeEquivalenceTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_CACHE_INFO == TRUE
+        GetF10CacheInfo,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_SYSTEM_PM_TABLE == TRUE
+        GetF10SysPmTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_WHEA_INIT == TRUE
+        GetF10WheaInitData,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PLATFORM_TYPE_SPECIFIC_INFO == TRUE
+        F10GetPlatformTypeSpecificInfo,
+      #else
+        (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonAssert,
+      #endif
+      #if IS_NB_PSTATE_ENABLED == TRUE
+        (PF_IS_NB_PSTATE_ENABLED) CommonReturnFalse,
+      #else
+        (PF_IS_NB_PSTATE_ENABLED) CommonAssert,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F10NextLinkHasHtPhyFeats,
+      #else
+        (PF_NEXT_LINK_HAS_HTFPY_FEATS) CommonReturnFalse,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F10SetHtPhyRegister,
+      #else
+        (PF_SET_HT_PHY_REGISTER) CommonAssert,
+      #endif
+      #if BASE_FAMILY_PCI == TRUE
+        F10GetNextHtLinkFeatures,
+      #else
+        (PF_GET_NEXT_HT_LINK_FEATURES) CommonReturnFalse,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (REGISTER_TABLE **) F10PhRegisterTables,
+      #else
+        NULL,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (TABLE_ENTRY_TYPE_DESCRIPTOR *) F10PhTableEntryTypeDescriptors,
+      #else
+        NULL,
+      #endif
+      NULL,
+      NULL,
+      InitCacheDisabled,
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        GetF10EarlyInitOnCoreTable
+      #else
+        (PF_GET_EARLY_INIT_TABLE) CommonVoid
+      #endif
+    };
+
+    #define PH_SOCKETS 1
+    #define PH_MODULES 1
+    #define PH_RECOVERY_SOCKETS 1
+    #define PH_RECOVERY_MODULES 1
+    extern F_CPU_GET_SUBFAMILY_ID_ARRAY GetF10PhLogicalIdAndRev;
+    #define OPT_F10_PH_ID (PF_CPU_GET_SUBFAMILY_ID_ARRAY) GetF10PhLogicalIdAndRev,
+    #ifndef ADVCFG_PLATFORM_SOCKETS
+      #define ADVCFG_PLATFORM_SOCKETS PH_SOCKETS
+    #else
+      #if ADVCFG_PLATFORM_SOCKETS < PH_SOCKETS
+        #undef ADVCFG_PLATFORM_SOCKETS
+        #define ADVCFG_PLATFORM_SOCKETS PH_SOCKETS
+      #endif
+    #endif
+    #ifndef ADVCFG_PLATFORM_MODULES
+      #define ADVCFG_PLATFORM_MODULES PH_MODULES
+    #else
+      #if ADVCFG_PLATFORM_MODULES < PH_MODULES
+        #undef ADVCFG_PLATFORM_MODULES
+        #define ADVCFG_PLATFORM_MODULES PH_MODULES
+      #endif
+    #endif
+
+    #if GET_PATCHES == TRUE
+      #define F10_PH_UCODE_BF
+
+      // If a patch is required for recovery mode to function properly, add a
+      // conditional for AGESA_ENTRY_INIT_RECOVERY, and pull it in.
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        #if OPTION_AM3_SOCKET_SUPPORT == TRUE
+          extern  CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000bf;
+          #undef F10_PH_UCODE_BF
+          #define F10_PH_UCODE_BF &CpuF10MicrocodePatch010000bf,
+        #endif
+      #endif
+
+      CONST MICROCODE_PATCHES ROMDATA *CpuF10PhMicroCodePatchArray[] =
+      {
+        F10_PH_UCODE_BF
+        NULL
+      };
+
+      CONST UINT8 ROMDATA CpuF10PhNumberOfMicrocodePatches = (UINT8) ((sizeof (CpuF10PhMicroCodePatchArray) / sizeof (CpuF10PhMicroCodePatchArray[0])) - 1);
+    #endif
+
+    #define OPT_F10_PH_CPU {AMD_FAMILY_10_PH, &cpuF10PhServices},
+  #else
+    #define OPT_F10_PH_CPU
+    #define OPT_F10_PH_ID
+  #endif
+#else
+  #define OPT_F10_PH_CPU
+  #define OPT_F10_PH_ID
+#endif
+
+
+/*
+ * Install family 10h model 4 support
+ */
+#ifdef OPTION_FAMILY10H_RB
+  #if OPTION_FAMILY10H_RB == TRUE
+    extern CONST REGISTER_TABLE ROMDATA F10RevCPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10RevCMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10RevCHtPhyRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10RbPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10RbMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F10RbHtPhyRegisterTable;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10RbMicroCodePatchesStruct;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF10RbMicrocodeEquivalenceTable;
+    extern F_CPU_GET_IDD_MAX F10CommonRevCGetProcIddMax;
+    extern F_CPU_GET_NB_PSTATE_INFO F10CommonRevCGetNbPstateInfo;
+    extern F_CPU_GET_MIN_MAX_NB_FREQ F10RevCGetMinMaxNbFrequency;
+    extern F_CPU_IS_NBCOF_INIT_NEEDED F10CommonRevCGetNbCofVidUpdate;
+    extern F_IS_NB_PSTATE_ENABLED F10CommonRevCIsNbPstateEnabled;
+    extern F_CPU_NUMBER_OF_PHYSICAL_CORES F10CommonRevCGetNumberOfPhysicalCores;
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST REGISTER_TABLE ROMDATA *F10RbRegisterTables[] =
+      {
+        #if BASE_FAMILY_PCI == TRUE
+          &F10PciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10MultiLinkPciRegisterTable,
+          &F10SingleLinkPciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10RevCPciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F10RbPciRegisterTable,
+        #endif
+        #if BASE_FAMILY_MSR == TRUE
+          &F10MsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F10RevCMsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F10RbMsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10HtPhyRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10RevCHtPhyRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F10RbHtPhyRegisterTable,
+        #endif
+        #if BASE_FAMILY_WORKAROUNDS == TRUE
+          &F10WorkaroundsTable,
+        #endif
+        // the end.
+        NULL
+      };
+    #endif
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F10RbTableEntryTypeDescriptors[] =
+      {
+        {MsrRegister, SetRegisterForMsrEntry},
+        {PciRegister, SetRegisterForPciEntry},
+        {FamSpecificWorkaround, SetRegisterForFamSpecificWorkaroundEntry},
+        {HtPhyRegister, SetRegisterForHtPhyEntry},
+        {HtPhyRangeRegister, SetRegisterForHtPhyRangeEntry},
+        {DeemphasisRegister, SetRegisterForDeemphasisEntry},
+        {ProfileFixup, SetRegisterForPerformanceProfileEntry},
+        {HtHostPciRegister, SetRegisterForHtHostEntry},
+        {HtTokenPciRegister, SetRegisterForHtLinkTokenEntry},
+        {CoreCountsPciRegister, SetRegisterForCoreCountsPerformanceEntry},
+        {ProcCountsPciRegister, SetRegisterForProcessorCountsEntry},
+        {TokenPciRegister, SetRegisterForTokenPciEntry},
+        {HtFeatPciRegister, SetRegisterForHtFeaturePciEntry},
+        {HtPhyProfileRegister, SetRegisterForHtPhyProfileEntry},
+        // End
+        {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+      };
+    #endif
+
+    CONST CPU_SPECIFIC_SERVICES ROMDATA cpuF10RbServices =
+    {
+      0,
+      #if DISABLE_PSTATE == TRUE
+        F10DisablePstate,
+      #else
+        (PF_CPU_DISABLE_PSTATE) CommonAssert,
+      #endif
+      #if TRANSITION_PSTATE == TRUE
+        F10TransitionPstate,
+      #else
+        (PF_CPU_TRANSITION_PSTATE) CommonAssert,
+      #endif
+      #if PROC_IDD_MAX == TRUE
+        F10CommonRevCGetProcIddMax,
+      #else
+        (PF_CPU_GET_IDD_MAX) CommonAssert,
+      #endif
+      #if GET_TSC_RATE == TRUE
+        F10GetTscRate,
+      #else
+        (PF_CPU_GET_TSC_RATE) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10GetCurrentNbFrequency,
+      #else
+        (PF_CPU_GET_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10RevCGetMinMaxNbFrequency,
+      #else
+        (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F10CommonRevCGetNbPstateInfo,
+      #else
+        (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert,
+      #endif
+      #if IS_NBCOF_INIT_NEEDED == TRUE
+        F10CommonRevCGetNbCofVidUpdate,
+      #else
+        (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonAssert,
+      #endif
+      #if GET_NB_IDD_MAX == TRUE
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #else
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #endif
+      #if AP_INITIAL_LAUNCH == TRUE
+        F10LaunchApCore,
+      #else
+        (PF_CPU_AP_INITIAL_LAUNCH) CommonAssert,
+      #endif
+      #if (BRAND_STRING1 == TRUE) || (BRAND_STRING2 == TRUE)
+        F10CommonRevCGetNumberOfPhysicalCores,
+      #else
+        (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonAssert,
+      #endif
+      #if GET_AP_MAILBOX_FROM_HW == TRUE
+        F10GetApMailboxFromHardware,
+      #else
+        (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert,
+      #endif
+      #if SET_AP_CORE_NUMBER == TRUE
+        F10SetApCoreNumber,
+      #else
+        (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if GET_AP_CORE_NUMBER == TRUE
+        F10GetApCoreNumber,
+      #else
+        (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if TRANSFER_AP_CORE_NUMBER == TRUE
+        F10TransferApCoreNumber,
+      #else
+        (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if ID_POSITION_INITIAL_APICID == TRUE
+        F10CpuAmdCoreIdPositionInInitialApicId,
+      #else
+        (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonAssert,
+      #endif
+      #if SAVE_FEATURES == TRUE
+        F10SaveFeatures,
+      #else
+        (PF_CPU_SAVE_FEATURES) CommonAssert,
+      #endif
+      #if WRITE_FEATURES == TRUE
+        F10WriteFeatures,
+      #else
+        (PF_CPU_WRITE_FEATURES) CommonAssert,
+      #endif
+      #if SET_WARM_RESET_FLAG == TRUE
+        F10SetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_SET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if GET_WARM_RESET_FLAG == TRUE
+        F10GetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_GET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if BRAND_STRING1 == TRUE
+        GetF10BrandIdString1,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if BRAND_STRING2 == TRUE
+        GetF10BrandIdString2,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES == TRUE
+        GetF10RbMicroCodePatchesStruct,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES_EQUIVALENCE_TABLE == TRUE
+        GetF10RbMicrocodeEquivalenceTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_CACHE_INFO == TRUE
+        GetF10CacheInfo,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_SYSTEM_PM_TABLE == TRUE
+        GetF10SysPmTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_WHEA_INIT == TRUE
+        GetF10WheaInitData,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PLATFORM_TYPE_SPECIFIC_INFO == TRUE
+        F10GetPlatformTypeSpecificInfo,
+      #else
+        (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonAssert,
+      #endif
+      #if IS_NB_PSTATE_ENABLED == TRUE
+        F10CommonRevCIsNbPstateEnabled,
+      #else
+        (PF_IS_NB_PSTATE_ENABLED) CommonAssert,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F10NextLinkHasHtPhyFeats,
+      #else
+        (PF_NEXT_LINK_HAS_HTFPY_FEATS) CommonReturnFalse,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F10SetHtPhyRegister,
+      #else
+        (PF_SET_HT_PHY_REGISTER) CommonAssert,
+      #endif
+      #if BASE_FAMILY_PCI == TRUE
+        F10GetNextHtLinkFeatures,
+      #else
+        (PF_GET_NEXT_HT_LINK_FEATURES) CommonReturnFalse,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (REGISTER_TABLE **) F10RbRegisterTables,
+      #else
+        NULL,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (TABLE_ENTRY_TYPE_DESCRIPTOR *) F10RbTableEntryTypeDescriptors,
+      #else
+        NULL,
+      #endif
+      NULL,
+      NULL,
+      InitCacheDisabled,
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        GetF10EarlyInitOnCoreTable
+      #else
+        (PF_GET_EARLY_INIT_TABLE) CommonVoid
+      #endif
+    };
+
+    #define RB_SOCKETS 8
+    #define RB_MODULES 1
+    #define RB_RECOVERY_SOCKETS 1
+    #define RB_RECOVERY_MODULES 1
+    extern F_CPU_GET_SUBFAMILY_ID_ARRAY GetF10RbLogicalIdAndRev;
+    #define OPT_F10_RB_ID (PF_CPU_GET_SUBFAMILY_ID_ARRAY) GetF10RbLogicalIdAndRev,
+    #ifndef ADVCFG_PLATFORM_SOCKETS
+      #define ADVCFG_PLATFORM_SOCKETS RB_SOCKETS
+    #else
+      #if ADVCFG_PLATFORM_SOCKETS < RB_SOCKETS
+        #undef ADVCFG_PLATFORM_SOCKETS
+        #define ADVCFG_PLATFORM_SOCKETS RB_SOCKETS
+      #endif
+    #endif
+    #ifndef ADVCFG_PLATFORM_MODULES
+      #define ADVCFG_PLATFORM_MODULES RB_MODULES
+    #else
+      #if ADVCFG_PLATFORM_MODULES < RB_MODULES
+        #undef ADVCFG_PLATFORM_MODULES
+        #define ADVCFG_PLATFORM_MODULES RB_MODULES
+      #endif
+    #endif
+
+    #if GET_PATCHES == TRUE
+      #define F10_RB_UCODE_85
+      #define F10_RB_UCODE_C6
+      #define F10_RB_UCODE_C8
+
+      // If a patch is required for recovery mode to function properly, add a
+      // conditional for AGESA_ENTRY_INIT_RECOVERY, and pull it in.
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        #if OPTION_AM3_SOCKET_SUPPORT == TRUE
+          extern  CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch01000085;
+          extern  CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000c6;
+          extern  CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000c8;
+          #undef F10_RB_UCODE_85
+          #define F10_RB_UCODE_85 &CpuF10MicrocodePatch01000085,
+          #undef F10_RB_UCODE_C6
+          #define F10_RB_UCODE_C6 &CpuF10MicrocodePatch010000c6,
+          #undef F10_RB_UCODE_C8
+          #define F10_RB_UCODE_C8 &CpuF10MicrocodePatch010000c8,
+        #endif
+      #endif
+
+      CONST MICROCODE_PATCHES ROMDATA *CpuF10RbMicroCodePatchArray[] =
+      {
+        F10_RB_UCODE_85
+        F10_RB_UCODE_C6
+        F10_RB_UCODE_C8
+        NULL
+      };
+
+      CONST UINT8 ROMDATA CpuF10RbNumberOfMicrocodePatches = (UINT8) ((sizeof (CpuF10RbMicroCodePatchArray) / sizeof (CpuF10RbMicroCodePatchArray[0])) - 1);
+    #endif
+
+    #define OPT_F10_RB_CPU {AMD_FAMILY_10_RB, &cpuF10RbServices},
+  #else
+    #define OPT_F10_RB_CPU
+    #define OPT_F10_RB_ID
+  #endif
+#else
+  #define OPT_F10_RB_CPU
+  #define OPT_F10_RB_ID
+#endif
+
+
+/*
+ * Install unknown family 10h support
+ */
+
+#if USES_REGISTER_TABLES == TRUE
+  CONST REGISTER_TABLE ROMDATA *F10UnknownRegisterTables[] =
+  {
+    #if BASE_FAMILY_PCI == TRUE
+      &F10PciRegisterTable,
+    #endif
+    #if BASE_FAMILY_MSR == TRUE
+      &F10MsrRegisterTable,
+    #endif
+    #if BASE_FAMILY_HT_PCI == TRUE
+      &F10HtPhyRegisterTable,
+    #endif
+    #if OPTION_MULTISOCKET == TRUE
+      #if MODEL_SPECIFIC_PCI == TRUE
+        &F10MultiLinkPciRegisterTable,
+      #endif
+    #endif
+    #if OPTION_MULTISOCKET == FALSE
+      #if MODEL_SPECIFIC_PCI == TRUE
+        &F10SingleLinkPciRegisterTable,
+      #endif
+    #endif
+    #if BASE_FAMILY_WORKAROUNDS == TRUE
+      &F10WorkaroundsTable,
+    #endif
+    // the end.
+    NULL
+  };
+#endif
+
+#if USES_REGISTER_TABLES == TRUE
+  CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F10UnknownTableEntryTypeDescriptors[] =
+  {
+    {MsrRegister, SetRegisterForMsrEntry},
+    {PciRegister, SetRegisterForPciEntry},
+    {FamSpecificWorkaround, SetRegisterForFamSpecificWorkaroundEntry},
+    {HtPhyRegister, SetRegisterForHtPhyEntry},
+    {HtPhyRangeRegister, SetRegisterForHtPhyRangeEntry},
+    {DeemphasisRegister, SetRegisterForDeemphasisEntry},
+    {ProfileFixup, SetRegisterForPerformanceProfileEntry},
+    {HtHostPciRegister, SetRegisterForHtHostEntry},
+    {HtTokenPciRegister, (PF_DO_TABLE_ENTRY)CommonVoid},
+    {CoreCountsPciRegister, SetRegisterForCoreCountsPerformanceEntry},
+    {ProcCountsPciRegister, SetRegisterForProcessorCountsEntry},
+    {HtFeatPciRegister, SetRegisterForHtFeaturePciEntry},
+    // End
+    {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+  };
+#endif
+
+
+CONST CPU_SPECIFIC_SERVICES ROMDATA cpuF10UnknownServices =
+{
+  0,
+  #if DISABLE_PSTATE == TRUE
+    F10DisablePstate,
+  #else
+    (PF_CPU_DISABLE_PSTATE) CommonAssert,
+  #endif
+  #if TRANSITION_PSTATE == TRUE
+    F10TransitionPstate,
+  #else
+    (PF_CPU_TRANSITION_PSTATE) CommonAssert,
+  #endif
+  #if PROC_IDD_MAX == TRUE
+    (PF_CPU_GET_IDD_MAX) CommonReturnFalse,
+  #else
+    (PF_CPU_GET_IDD_MAX) CommonAssert,
+  #endif
+  #if GET_TSC_RATE == TRUE
+    F10GetTscRate,
+  #else
+    (PF_CPU_GET_TSC_RATE) CommonAssert,
+  #endif
+  #if GET_NB_FREQ == TRUE
+    F10GetCurrentNbFrequency,
+  #else
+    (PF_CPU_GET_NB_FREQ) CommonAssert,
+  #endif
+  #if GET_NB_FREQ == TRUE
+    (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonReturnFalse,
+  #else
+    (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert,
+  #endif
+  #if GET_NB_FREQ == TRUE
+    (PF_CPU_GET_NB_PSTATE_INFO) CommonReturnFalse,
+  #else
+    (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert,
+  #endif
+  #if IS_NBCOF_INIT_NEEDED == TRUE
+    (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonReturnFalse,
+  #else
+    (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonAssert,
+  #endif
+  #if GET_NB_IDD_MAX == TRUE
+    (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+  #else
+    (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+  #endif
+  #if AP_INITIAL_LAUNCH == TRUE
+    F10LaunchApCore,
+  #else
+    (PF_CPU_AP_INITIAL_LAUNCH) CommonAssert,
+  #endif
+  #if (BRAND_STRING1 == TRUE) || (BRAND_STRING2 == TRUE)
+    (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonReturnZero8,
+  #else
+    (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonAssert,
+  #endif
+  #if GET_AP_MAILBOX_FROM_HW == TRUE
+    F10GetApMailboxFromHardware,
+  #else
+    (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert,
+  #endif
+  #if SET_AP_CORE_NUMBER == TRUE
+    F10SetApCoreNumber,
+  #else
+    (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert,
+  #endif
+  #if GET_AP_CORE_NUMBER == TRUE
+    F10GetApCoreNumber,
+  #else
+    (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert,
+  #endif
+  #if TRANSFER_AP_CORE_NUMBER == TRUE
+    F10TransferApCoreNumber,
+  #else
+    (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert,
+  #endif
+  #if ID_POSITION_INITIAL_APICID == TRUE
+    F10CpuAmdCoreIdPositionInInitialApicId,
+  #else
+    (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonAssert,
+  #endif
+  #if SAVE_FEATURES == TRUE
+    F10SaveFeatures,
+  #else
+    (PF_CPU_SAVE_FEATURES) CommonAssert,
+  #endif
+  #if WRITE_FEATURES == TRUE
+    F10WriteFeatures,
+  #else
+    (PF_CPU_WRITE_FEATURES) CommonAssert,
+  #endif
+  #if SET_WARM_RESET_FLAG == TRUE
+    F10SetAgesaWarmResetFlag,
+  #else
+    (PF_CPU_SET_WARM_RESET_FLAG) CommonAssert,
+  #endif
+  #if GET_WARM_RESET_FLAG == TRUE
+    F10GetAgesaWarmResetFlag,
+  #else
+    (PF_CPU_GET_WARM_RESET_FLAG) CommonAssert,
+  #endif
+  #if BRAND_STRING1 == TRUE
+    GetF10BrandIdString1,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if BRAND_STRING2 == TRUE
+    GetF10BrandIdString2,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_PATCHES == TRUE
+    GetEmptyArray,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_PATCHES_EQUIVALENCE_TABLE == TRUE
+    GetEmptyArray,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_CACHE_INFO == TRUE
+    GetF10CacheInfo,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_SYSTEM_PM_TABLE == TRUE
+    GetF10SysPmTable,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_WHEA_INIT == TRUE
+    GetF10WheaInitData,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_PLATFORM_TYPE_SPECIFIC_INFO == TRUE
+    F10GetPlatformTypeSpecificInfo,
+  #else
+    (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonAssert,
+  #endif
+  #if IS_NB_PSTATE_ENABLED == TRUE
+    (PF_IS_NB_PSTATE_ENABLED) CommonReturnFalse,
+  #else
+    (PF_IS_NB_PSTATE_ENABLED) CommonAssert,
+  #endif
+  #if (BASE_FAMILY_HT_PCI == TRUE)
+    F10NextLinkHasHtPhyFeats,
+  #else
+    (PF_NEXT_LINK_HAS_HTFPY_FEATS) CommonReturnFalse,
+  #endif
+  #if (BASE_FAMILY_HT_PCI == TRUE)
+    F10SetHtPhyRegister,
+  #else
+    (PF_SET_HT_PHY_REGISTER) CommonVoid,
+  #endif
+  #if BASE_FAMILY_PCI == TRUE
+    F10GetNextHtLinkFeatures,
+  #else
+    (PF_GET_NEXT_HT_LINK_FEATURES) CommonReturnFalse,
+  #endif
+  #if USES_REGISTER_TABLES == TRUE
+    (REGISTER_TABLE **) F10UnknownRegisterTables,
+  #else
+    NULL,
+  #endif
+  #if USES_REGISTER_TABLES == TRUE
+    (TABLE_ENTRY_TYPE_DESCRIPTOR *) F10UnknownTableEntryTypeDescriptors,
+  #else
+    NULL,
+  #endif
+  NULL,
+  NULL,
+  InitCacheDisabled,
+  #if AGESA_ENTRY_INIT_EARLY == TRUE
+    GetF10EarlyInitOnCoreTable
+  #else
+    (PF_GET_EARLY_INIT_TABLE) CommonVoid
+  #endif
+};
+
+// Family 10h maximum base address is 48 bits. Limit BLDCFG to 48 bits, if appropriate.
+#if (FAMILY_MMIO_BASE_MASK < 0xFFFF000000000000ull)
+  #undef  FAMILY_MMIO_BASE_MASK
+  #define FAMILY_MMIO_BASE_MASK (0xFFFF000000000000ull)
+#endif
+
+#undef OPT_F10_ID_TABLE
+#define OPT_F10_ID_TABLE {0x10, {AMD_FAMILY_10, AMD_F10_UNKNOWN}, F10LogicalIdTable, (sizeof (F10LogicalIdTable) / sizeof (F10LogicalIdTable[0]))},
+#define OPT_F10_UNKNOWN_CPU {AMD_FAMILY_10, &cpuF10UnknownServices},
+
+#undef OPT_F10_TABLE
+#define OPT_F10_TABLE   OPT_F10_BL_CPU  OPT_F10_DA_CPU  OPT_F10_HY_CPU  OPT_F10_PH_CPU  OPT_F10_RB_CPU  OPT_F10_UNKNOWN_CPU
+
+#if OPTION_G34_SOCKET_SUPPORT == TRUE
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayG34;
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayG34;
+  #define F10_G34_BRANDSTRING1 &F10BrandIdString1ArrayG34,
+  #define F10_G34_BRANDSTRING2 &F10BrandIdString2ArrayG34,
+#else
+  #define F10_G34_BRANDSTRING1
+  #define F10_G34_BRANDSTRING2
+#endif
+#if OPTION_C32_SOCKET_SUPPORT == TRUE
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayC32;
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayC32;
+  #define F10_C32_BRANDSTRING1 &F10BrandIdString1ArrayC32,
+  #define F10_C32_BRANDSTRING2 &F10BrandIdString2ArrayC32,
+#else
+  #define F10_C32_BRANDSTRING1
+  #define F10_C32_BRANDSTRING2
+#endif
+#if OPTION_S1G3_SOCKET_SUPPORT == TRUE
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayS1g3;
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayS1g3;
+  #define F10_S1G3_BRANDSTRING1 &F10BrandIdString1ArrayS1g3,
+  #define F10_S1G3_BRANDSTRING2 &F10BrandIdString2ArrayS1g3,
+#else
+  #define F10_S1G3_BRANDSTRING1
+  #define F10_S1G3_BRANDSTRING2
+#endif
+#if OPTION_S1G4_SOCKET_SUPPORT == TRUE
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayS1g4;
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayS1g4;
+  #define F10_S1G4_BRANDSTRING1 &F10BrandIdString1ArrayS1g4,
+  #define F10_S1G4_BRANDSTRING2 &F10BrandIdString2ArrayS1g4,
+#else
+  #define F10_S1G4_BRANDSTRING1
+  #define F10_S1G4_BRANDSTRING2
+#endif
+#if OPTION_ASB2_SOCKET_SUPPORT == TRUE
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayAsb2;
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayAsb2;
+  #define F10_ASB2_BRANDSTRING1 &F10BrandIdString1ArrayAsb2,
+  #define F10_ASB2_BRANDSTRING2 &F10BrandIdString2ArrayAsb2,
+#else
+  #define F10_ASB2_BRANDSTRING1
+  #define F10_ASB2_BRANDSTRING2
+#endif
+#if OPTION_AM3_SOCKET_SUPPORT == TRUE
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayAm3;
+  extern CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayAm3;
+  #define F10_AM3_BRANDSTRING1 &F10BrandIdString1ArrayAm3,
+  #define F10_AM3_BRANDSTRING2 &F10BrandIdString2ArrayAm3,
+#else
+  #define F10_AM3_BRANDSTRING1
+  #define F10_AM3_BRANDSTRING2
+#endif
+
+#if BRAND_STRING1 == TRUE
+  CONST CPU_BRAND_TABLE ROMDATA *F10BrandIdString1Tables[] =
+  {
+    F10_G34_BRANDSTRING1
+    F10_C32_BRANDSTRING1
+    F10_S1G3_BRANDSTRING1
+    F10_S1G4_BRANDSTRING1
+    F10_ASB2_BRANDSTRING1
+    F10_AM3_BRANDSTRING1
+  };
+
+  CONST UINT8 F10BrandIdString1TableCount = (sizeof (F10BrandIdString1Tables) / sizeof (F10BrandIdString1Tables[0]));
+#endif
+
+#if BRAND_STRING2 == TRUE
+  CONST CPU_BRAND_TABLE ROMDATA *F10BrandIdString2Tables[] =
+  {
+    F10_G34_BRANDSTRING2
+    F10_C32_BRANDSTRING2
+    F10_S1G3_BRANDSTRING2
+    F10_S1G4_BRANDSTRING2
+    F10_ASB2_BRANDSTRING2
+    F10_AM3_BRANDSTRING2
+  };
+
+  CONST UINT8 F10BrandIdString2TableCount = (sizeof (F10BrandIdString2Tables) / sizeof (F10BrandIdString2Tables[0]));
+#endif
+
+CONST PF_CPU_GET_SUBFAMILY_ID_ARRAY ROMDATA F10LogicalIdTable[] =
+{
+  OPT_F10_BL_ID
+  OPT_F10_DA_ID
+  OPT_F10_HY_ID
+  OPT_F10_PH_ID
+  OPT_F10_RB_ID
+};
+
+#endif  // _OPTION_FAMILY_10H_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionFamily15hEarlySample.h b/src/vendorcode/amd/agesa/f15/Include/OptionFamily15hEarlySample.h
new file mode 100644
index 0000000000..9d77332e20
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionFamily15hEarlySample.h
@@ -0,0 +1,231 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Family 15h 'early sample' support
+ *
+ * This file defines the required structures for family 15h pre-production processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 53356 $   @e \$Date: 2011-05-18 14:14:18 -0600 (Wed, 18 May 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_FAMILY_15H_EARLY_SAMPLE_H_
+#define _OPTION_FAMILY_15H_EARLY_SAMPLE_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*
+ * Install family 15h model 0x00 - 0x0F Early Sample support
+ */
+
+/**
+ *  Early sample hook point during HTC initialization
+ *
+ *  @param[in,out] HtcRegister             Value of F3x64 to be written.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID F_F15_OR_ES_HTC_INIT_HOOK (
+  IN OUT   UINT32  *HtcRegister,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_F15_OR_ES_HTC_INIT_HOOK *PF_F15_OR_ES_HTC_INIT_HOOK;
+
+/// Hook points in the core functionality necessary for
+/// providing support for pre-production CPUs.
+typedef struct {
+  PF_F15_OR_ES_HTC_INIT_HOOK     F15OrHtcInitHook;    ///< Allows for override of a certain processor register value during HTC init
+} F15_OR_ES_CORE_SUPPORT;
+
+/**
+ *  Returns whether or not the processor should enable the CPB feature.
+ *
+ *  @param[in,out] IsEnabled               Whether or not to enable CPB
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID F_F15_OR_ES_IS_CPB_SUPPORTED (
+  IN OUT   BOOLEAN *IsEnabled,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_F15_OR_ES_IS_CPB_SUPPORTED *PF_F15_OR_ES_IS_CPB_SUPPORTED;
+
+
+
+/// Hook points in the CPB feature necessary for
+/// providing support for pre-production CPUs.
+typedef struct {
+  PF_F15_OR_ES_IS_CPB_SUPPORTED    F15OrIsCpbSupportedHook;   ///< CPB enablement override
+} F15_OR_ES_CPB_SUPPORT;
+
+/**
+ *  Returns whether or not the processor should enable the C6 feature.
+ *
+ *  @param[in,out] IsEnabled               Whether or not to enable C6
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID F_F15_OR_ES_IS_C6_SUPPORTED (
+  IN OUT   BOOLEAN *IsEnabled,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_F15_OR_ES_IS_C6_SUPPORTED *PF_F15_OR_ES_IS_C6_SUPPORTED;
+
+
+
+/// Hook points in the C6 feature necessary for
+/// providing support for pre-production CPUs.
+typedef struct {
+  PF_F15_OR_ES_IS_C6_SUPPORTED    F15OrIsC6SupportedHook;   ///< C6 enablement override
+} F15_OR_ES_C6_SUPPORT;
+
+
+/**
+ *  Workaround to avoid patch loading from causing NB cycles
+ *
+ *  @param[in,out] StdHeader     - Config handle for library and services.
+ *  @param[in,out] SavedMsrValue - Saved a MSR value
+ *
+ */
+typedef VOID F_F15_OR_ES_AVOID_NB_CYCLES_START (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT64            *SavedMsrValue
+  );
+
+/// Reference to a Method.
+typedef F_F15_OR_ES_AVOID_NB_CYCLES_START *PF_F15_OR_ES_AVOID_NB_CYCLES_START;
+
+/**
+ *  Workaround to avoid patch loading from causing NB cycles
+ *
+ *  @param[in,out] StdHeader - Config handle for library and services.
+ *  @param[in] SavedMsrValue - Saved a MSR value
+ *
+ *
+ */
+typedef VOID F_F15_OR_ES_AVOID_NB_CYCLES_END (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT64            *SavedMsrValue
+  );
+
+/// Reference to a Method.
+typedef F_F15_OR_ES_AVOID_NB_CYCLES_END *PF_F15_OR_ES_AVOID_NB_CYCLES_END;
+
+/**
+ *  Workaround for Ax processors after patch is loaded.
+ *
+ *  @param[in] StdHeader     - Config handle for library and services.
+ *  @param[in] IsPatchLoaded - Is patch loaded
+ *
+ *
+ */
+typedef VOID F_F15_OR_ES_AFTER_PATCH_LOADED (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN       BOOLEAN IsPatchLoaded
+  );
+
+/// Reference to a Method.
+typedef F_F15_OR_ES_AFTER_PATCH_LOADED *PF_F15_OR_ES_AFTER_PATCH_LOADED;
+
+/**
+ *  Update the CPU microcode.
+ *
+ *  @param[in] StdHeader   - Config handle for library and services.
+ *
+ *  @retval    TRUE   - Patch Loaded Successfully.
+ *  @retval    FALSE  - Patch Did Not Get Loaded.
+ *
+ */
+typedef BOOLEAN F_F15_OR_ES_LOAD_MCU_PATCH (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_F15_OR_ES_LOAD_MCU_PATCH *PF_F15_OR_ES_LOAD_MCU_PATCH;
+
+
+/// Hook points in the Microcode Update feature necessary for
+/// providing support for pre-production CPUs.
+typedef struct {
+  PF_F15_OR_ES_AVOID_NB_CYCLES_START  F15OrESAvoidNbCyclesStart; ///< Workaround to avoid patch loading from causing NB cycles
+  PF_F15_OR_ES_AVOID_NB_CYCLES_END    F15OrESAvoidNbCyclesEnd;   ///< Workaround to avoid patch loading from causing NB cycles
+  PF_F15_OR_ES_LOAD_MCU_PATCH         F15OrUpdateMcuPatchHook;   ///< Processor MCU Update override
+  PF_F15_OR_ES_AFTER_PATCH_LOADED     F15OrESAfterPatchLoaded;   ///< Workaround for Ax processors after patch is loaded
+} F15_OR_ES_MCU_PATCH;
+
+
+
+typedef BOOLEAN F_F15_TN_ES_LOAD_MCU_PATCH (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_F15_TN_ES_LOAD_MCU_PATCH *PF_F15_TN_ES_LOAD_MCU_PATCH;
+
+/// Hook points in the Microcode Update feature necessary for
+/// providing support for pre-production CPUs.
+typedef struct {
+  PF_F15_TN_ES_LOAD_MCU_PATCH    F15TnUpdateMcuPatchHook;   ///< Processor MCU Update override
+} F15_TN_ES_MCU_PATCH;
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+
+#endif  // _OPTION_FAMILY_15H_EARLY_SAMPLE_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionFamily15hInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionFamily15hInstall.h
new file mode 100644
index 0000000000..73eeb6fca4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionFamily15hInstall.h
@@ -0,0 +1,1570 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of family 15h support
+ *
+ * This file generates the defaults tables for family 15h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 60770 $   @e \$Date: 2011-10-21 15:51:10 -0600 (Fri, 21 Oct 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_FAMILY_15H_INSTALL_H_
+#define _OPTION_FAMILY_15H_INSTALL_H_
+
+#include "OptionFamily15hEarlySample.h"
+
+/*
+ * Pull in family specific services based on entry point
+ */
+
+/*
+ * Common Family 15h routines
+ */
+extern F_IS_NB_PSTATE_ENABLED F15IsNbPstateEnabled;
+
+/*
+ * Install family 15h model 0 support
+ */
+#ifdef OPTION_FAMILY15H_OR
+  #if OPTION_FAMILY15H_OR == TRUE
+    extern F_CPU_GET_IDD_MAX F15OrGetProcIddMax;
+    extern F_CPU_GET_NB_PSTATE_INFO F15OrGetNbPstateInfo;
+    extern F_CPU_IS_NBCOF_INIT_NEEDED F15CommonGetNbCofVidUpdate;
+    extern F_CPU_DISABLE_PSTATE F15DisablePstate;
+    extern F_CPU_TRANSITION_PSTATE F15TransitionPstate;
+    extern F_CPU_GET_TSC_RATE F15GetTscRate;
+    extern F_CPU_GET_NB_FREQ F15OrGetCurrentNbFrequency;
+    extern F_CPU_GET_MIN_MAX_NB_FREQ F15OrGetMinMaxNbFrequency;
+    extern F_CPU_AP_INITIAL_LAUNCH F15LaunchApCore;
+    extern F_CPU_NUMBER_OF_PHYSICAL_CORES F15OrGetNumberOfPhysicalCores;
+    extern F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE F15OrGetApMailboxFromHardware;
+    extern F_CPU_SET_AP_CORE_NUMBER F15OrSetApCoreNumber;
+    extern F_CPU_GET_AP_CORE_NUMBER F15OrGetApCoreNumber;
+    extern F_CPU_TRANSFER_AP_CORE_NUMBER F15OrTransferApCoreNumber;
+    extern F_CORE_ID_POSITION_IN_INITIAL_APIC_ID F15CpuAmdCoreIdPositionInInitialApicId;
+    extern F_CPU_SET_WARM_RESET_FLAG F15SetAgesaWarmResetFlag;
+    extern F_CPU_GET_WARM_RESET_FLAG F15GetAgesaWarmResetFlag;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15CacheInfo;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15OrSysPmTable;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15WheaInitData;
+    extern F_CPU_SET_CFOH_REG SetF15OrCacheFlushOnHaltRegister;
+    extern F_NEXT_LINK_HAS_HTFPY_FEATS F15NextLinkHasHtPhyFeats;
+    extern F_SET_HT_PHY_REGISTER F15SetHtPhyRegister;
+    extern F_GET_NEXT_HT_LINK_FEATURES F15GetNextHtLinkFeatures;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15OrMicroCodePatchesStruct;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15OrMicrocodeEquivalenceTable;
+    extern F_GET_EARLY_INIT_TABLE GetF15OrEarlyInitOnCoreTable;
+    extern CONST REGISTER_TABLE ROMDATA F15OrPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15OrMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15OrAM3MsrWorkaroundTable;
+    extern CONST REGISTER_TABLE ROMDATA F15OrSharedMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15OrSharedMsrCuRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15OrSharedMsrWorkaroundTable;
+    extern CONST REGISTER_TABLE ROMDATA F15OrHtPhyRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15PciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15MsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15OrMultiLinkPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15OrSingleLinkPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15OrWorkaroundsTable;
+    extern CONST PACKAGE_HTLINK_MAP_ITEM ROMDATA HtFam15PackageLinkMap[];
+
+    #if OPTION_EARLY_SAMPLES == TRUE
+      extern CONST REGISTER_TABLE ROMDATA F15OrEarlySampleWorkaroundsTable;
+      extern CONST REGISTER_TABLE ROMDATA F15OrEarlySampleSharedMsrWorkaroundTable;
+      extern CONST REGISTER_TABLE ROMDATA F15OrEarlySampleSharedMsrRegisterTable;
+      extern CONST REGISTER_TABLE ROMDATA F15OrEarlySamplePciRegisterTable;
+      extern CONST REGISTER_TABLE ROMDATA F15OrEarlySampleMsrRegisterTable;
+    #endif
+    /**
+     * Core Pair and core pair primary determination table.
+     *
+     * The two fields from the core pair hardware register can be used to determine whether
+     * even number cores are primary or all cores are primary.  It can be extended if it is
+     * decided to have other configs as well.  The other logically possible value sets are BitMapMapping,
+     * but they are currently not supported by the processor.
+     */
+    CONST CORE_PAIR_MAP ROMDATA HtFam15CorePairMapping[] =
+    {
+      {1, 1, EvenCoresMapping},                                     ///< 1 Compute Unit with 2 cores
+      {3, 3, EvenCoresMapping},                                     ///< 2 Compute Units both with 2 Cores
+      {7, 7, EvenCoresMapping},                                     ///< 3 Compute Units all with 2 Cores
+      {0xF, 0xF, EvenCoresMapping},                                 ///< 4 Compute Units all with 2 Cores
+      {1, 0, AllCoresMapping},                                      ///< 1 Compute Unit with 1 core
+      {3, 0, AllCoresMapping},                                      ///< 2 Compute Units both with 1 Core
+      {7, 0, AllCoresMapping},                                      ///< 3 Compute Units all with 1 Core
+      {0xF, 0, AllCoresMapping},                                    ///< 4 Compute Units all with 1 Core
+      {HT_LIST_TERMINAL, HT_LIST_TERMINAL, MaxComputeUnitMapping}   ///< End
+    };
+
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST REGISTER_TABLE ROMDATA *F15OrRegisterTables[] =
+      {
+        #if BASE_FAMILY_PCI == TRUE
+          &F15PciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F15OrMultiLinkPciRegisterTable,
+          &F15OrSingleLinkPciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F15OrPciRegisterTable,
+          #if OPTION_EARLY_SAMPLES == TRUE
+            &F15OrEarlySamplePciRegisterTable,
+          #endif
+        #endif
+        #if BASE_FAMILY_MSR == TRUE
+          &F15MsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F15OrMsrRegisterTable,
+          #if (OPTION_AM3_SOCKET_SUPPORT == TRUE) && (CFG_FORCE_MICROSERVER == FALSE)
+            &F15OrAM3MsrWorkaroundTable,
+          #endif
+          #if OPTION_EARLY_SAMPLES == TRUE
+            &F15OrEarlySampleMsrRegisterTable,
+          #endif
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F15OrSharedMsrRegisterTable,
+          &F15OrSharedMsrCuRegisterTable,
+          &F15OrSharedMsrWorkaroundTable,
+          #if OPTION_EARLY_SAMPLES == TRUE
+            &F15OrEarlySampleSharedMsrRegisterTable,
+            &F15OrEarlySampleSharedMsrWorkaroundTable,
+          #endif
+        #endif
+        #if MODEL_SPECIFIC_HT_PCI == TRUE
+          &F15OrHtPhyRegisterTable,
+        #endif
+        #if BASE_FAMILY_WORKAROUNDS == TRUE
+          &F15OrWorkaroundsTable,
+          #if OPTION_EARLY_SAMPLES == TRUE
+            &F15OrEarlySampleWorkaroundsTable,
+          #endif
+        #endif
+        // the end.
+        NULL
+      };
+    #endif
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F15OrTableEntryTypeDescriptors[] =
+      {
+        {MsrRegister, SetRegisterForMsrEntry},
+        {PciRegister, SetRegisterForPciEntry},
+        {FamSpecificWorkaround, SetRegisterForFamSpecificWorkaroundEntry},
+        {HtPhyRegister, SetRegisterForHtPhyEntry},
+        {HtPhyRangeRegister, SetRegisterForHtPhyRangeEntry},
+        {DeemphasisRegister, SetRegisterForDeemphasisEntry},
+        {HtPhyFreqRegister, SetRegisterForHtPhyFreqEntry},
+        {ProfileFixup, SetRegisterForPerformanceProfileEntry},
+        {HtHostPciRegister, SetRegisterForHtHostEntry},
+        {HtHostPerfPciRegister, SetRegisterForHtHostPerfEntry},
+        {HtTokenPciRegister, SetRegisterForHtLinkTokenEntry},
+        {CoreCountsPciRegister, SetRegisterForCoreCountsPerformanceEntry},
+        {ProcCountsPciRegister, SetRegisterForProcessorCountsEntry},
+        {CompUnitCountsPciRegister, SetRegisterForComputeUnitCountsEntry},
+        {TokenPciRegister, SetRegisterForTokenPciEntry},
+        {HtFeatPciRegister, SetRegisterForHtFeaturePciEntry},
+        {HtLinkPciRegister, SetRegisterForHtLinkPciEntry},
+        {CompUnitCountsMsr, SetMsrForComputeUnitCountsEntry},
+        // End
+        {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+      };
+    #endif
+
+    CONST CPU_SPECIFIC_SERVICES ROMDATA cpuF15OrServices =
+    {
+      0,
+      #if DISABLE_PSTATE == TRUE
+        F15DisablePstate,
+      #else
+        (PF_CPU_DISABLE_PSTATE) CommonAssert,
+      #endif
+      #if TRANSITION_PSTATE == TRUE
+        F15TransitionPstate,
+      #else
+        (PF_CPU_TRANSITION_PSTATE) CommonAssert,
+      #endif
+      #if PROC_IDD_MAX == TRUE
+        F15OrGetProcIddMax,
+      #else
+        (PF_CPU_GET_IDD_MAX) CommonAssert,
+      #endif
+      #if GET_TSC_RATE == TRUE
+        F15GetTscRate,
+      #else
+        (PF_CPU_GET_TSC_RATE) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F15OrGetCurrentNbFrequency,
+      #else
+        (PF_CPU_GET_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F15OrGetMinMaxNbFrequency,
+      #else
+        (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F15OrGetNbPstateInfo,
+      #else
+        (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert,
+      #endif
+      #if IS_NBCOF_INIT_NEEDED == TRUE
+        F15CommonGetNbCofVidUpdate,
+      #else
+        (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonAssert,
+      #endif
+      #if GET_NB_IDD_MAX == TRUE
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #else
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #endif
+      #if AP_INITIAL_LAUNCH == TRUE
+        F15LaunchApCore,
+      #else
+        (PF_CPU_AP_INITIAL_LAUNCH) CommonAssert,
+      #endif
+      #if (BRAND_STRING1 == TRUE) || (BRAND_STRING2 == TRUE)
+        F15OrGetNumberOfPhysicalCores,
+      #else
+        (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonAssert,
+      #endif
+      #if GET_AP_MAILBOX_FROM_HW == TRUE
+        F15OrGetApMailboxFromHardware,
+      #else
+        (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert,
+      #endif
+      #if SET_AP_CORE_NUMBER == TRUE
+        F15OrSetApCoreNumber,
+      #else
+        (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if GET_AP_CORE_NUMBER == TRUE
+        F15OrGetApCoreNumber,
+      #else
+        (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if TRANSFER_AP_CORE_NUMBER == TRUE
+        F15OrTransferApCoreNumber,
+      #else
+        (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if ID_POSITION_INITIAL_APICID == TRUE
+        F15CpuAmdCoreIdPositionInInitialApicId,
+      #else
+        (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonAssert,
+      #endif
+      #if SAVE_FEATURES == TRUE
+        // F15OrSaveFeatures,
+        (PF_CPU_SAVE_FEATURES) CommonVoid,
+      #else
+        (PF_CPU_SAVE_FEATURES) CommonAssert,
+      #endif
+      #if WRITE_FEATURES == TRUE
+        // F15OrWriteFeatures,
+        (PF_CPU_WRITE_FEATURES) CommonVoid,
+      #else
+        (PF_CPU_WRITE_FEATURES) CommonAssert,
+      #endif
+      #if SET_WARM_RESET_FLAG == TRUE
+        F15SetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_SET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if GET_WARM_RESET_FLAG == TRUE
+        F15GetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_GET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if BRAND_STRING1 == TRUE
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonVoid,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if BRAND_STRING2 == TRUE
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonVoid,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES == TRUE
+        GetF15OrMicroCodePatchesStruct,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES_EQUIVALENCE_TABLE == TRUE
+        GetF15OrMicrocodeEquivalenceTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_CACHE_INFO == TRUE
+        GetF15CacheInfo,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_SYSTEM_PM_TABLE == TRUE
+        GetF15OrSysPmTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_WHEA_INIT == TRUE
+        GetF15WheaInitData,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PLATFORM_TYPE_SPECIFIC_INFO == TRUE
+        (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonReturnAgesaSuccess,
+      #else
+        (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonAssert,
+      #endif
+      #if IS_NB_PSTATE_ENABLED == TRUE
+        F15IsNbPstateEnabled,
+      #else
+        (PF_IS_NB_PSTATE_ENABLED) CommonAssert,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F15NextLinkHasHtPhyFeats,
+      #else
+        (PF_NEXT_LINK_HAS_HTFPY_FEATS) CommonReturnFalse,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F15SetHtPhyRegister,
+      #else
+        (PF_SET_HT_PHY_REGISTER) CommonAssert,
+      #endif
+      #if BASE_FAMILY_PCI == TRUE
+        F15GetNextHtLinkFeatures,
+      #else
+        (PF_GET_NEXT_HT_LINK_FEATURES) CommonAssert,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (REGISTER_TABLE **) F15OrRegisterTables,
+      #else
+        NULL,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (TABLE_ENTRY_TYPE_DESCRIPTOR *) F15OrTableEntryTypeDescriptors,
+      #else
+        NULL,
+      #endif
+      #if MODEL_SPECIFIC_HT_PCI == TRUE
+        (PACKAGE_HTLINK_MAP) &HtFam15PackageLinkMap,
+      #else
+        NULL,
+      #endif
+      (CORE_PAIR_MAP *) &HtFam15CorePairMapping,
+      InitCacheEnabled,
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        GetF15OrEarlyInitOnCoreTable
+      #else
+        (PF_GET_EARLY_INIT_TABLE) CommonVoid
+      #endif
+    };
+
+    #define OR_SOCKETS 8
+    #define OR_MODULES 2
+    #define OR_RECOVERY_SOCKETS 1
+    #define OR_RECOVERY_MODULES 1
+    extern F_CPU_GET_SUBFAMILY_ID_ARRAY GetF15OrLogicalIdAndRev;
+    #define OPT_F15_OR_ID (PF_CPU_GET_SUBFAMILY_ID_ARRAY) GetF15OrLogicalIdAndRev,
+    #ifndef ADVCFG_PLATFORM_SOCKETS
+      #define ADVCFG_PLATFORM_SOCKETS OR_SOCKETS
+    #else
+      #if ADVCFG_PLATFORM_SOCKETS < OR_SOCKETS
+        #undef ADVCFG_PLATFORM_SOCKETS
+        #define ADVCFG_PLATFORM_SOCKETS OR_SOCKETS
+      #endif
+    #endif
+    #ifndef ADVCFG_PLATFORM_MODULES
+      #define ADVCFG_PLATFORM_MODULES OR_MODULES
+    #else
+      #if ADVCFG_PLATFORM_MODULES < OR_MODULES
+        #undef ADVCFG_PLATFORM_MODULES
+        #define ADVCFG_PLATFORM_MODULES OR_MODULES
+      #endif
+    #endif
+
+    #if GET_PATCHES == TRUE
+      #define F15_OR_UCODE_17_UNENC
+      #define F15_OR_UCODE_11F_UNENC
+      #define F15_OR_UCODE_425
+      #define F15_OR_UCODE_50D
+      #define F15_OR_UCODE_624
+
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        #if OPTION_EARLY_SAMPLES == TRUE
+          extern  CONST UINT8 ROMDATA CpuF15OrMicrocodePatch06000425 [];
+          #undef F15_OR_UCODE_425
+          #define F15_OR_UCODE_425 CpuF15OrMicrocodePatch06000425,
+
+          extern  CONST UINT8 ROMDATA CpuF15OrMicrocodePatch0600050D_Enc [];
+          #undef F15_OR_UCODE_50D
+          #define F15_OR_UCODE_50D CpuF15OrMicrocodePatch0600050D_Enc,
+        #endif
+        extern  CONST UINT8 ROMDATA CpuF15OrMicrocodePatch06000624_Enc [];
+        #undef F15_OR_UCODE_624
+        #define F15_OR_UCODE_624 CpuF15OrMicrocodePatch06000624_Enc,
+      #endif
+
+      CONST UINT8 ROMDATA *CpuF15OrMicroCodePatchArray[] =
+      {
+        F15_OR_UCODE_624
+        F15_OR_UCODE_50D
+        F15_OR_UCODE_425
+        NULL
+      };
+
+      CONST UINT8 ROMDATA CpuF15OrNumberOfMicrocodePatches = (UINT8) ((sizeof (CpuF15OrMicroCodePatchArray) / sizeof (CpuF15OrMicroCodePatchArray[0])) - 1);
+    #endif
+
+    #if OPTION_EARLY_SAMPLES == TRUE
+      extern F_F15_OR_ES_AVOID_NB_CYCLES_START F15OrEarlySamplesAvoidNbCyclesStart;
+      extern F_F15_OR_ES_AVOID_NB_CYCLES_END F15OrEarlySamplesAvoidNbCyclesEnd;
+      extern F_F15_OR_ES_LOAD_MCU_PATCH F15OrEarlySamplesLoadMicrocodePatch;
+      extern F_F15_OR_ES_AFTER_PATCH_LOADED F15OrEarlySamplesAfterPatchLoaded;
+
+      CONST F15_OR_ES_MCU_PATCH ROMDATA F15OrEarlySampleLoadMcuPatch =
+      {
+        F15OrEarlySamplesAvoidNbCyclesStart,
+        F15OrEarlySamplesAvoidNbCyclesEnd,
+        F15OrEarlySamplesLoadMicrocodePatch,
+        F15OrEarlySamplesAfterPatchLoaded
+      };
+    #else
+      CONST F15_OR_ES_MCU_PATCH ROMDATA F15OrEarlySampleLoadMcuPatch =
+      {
+        (PF_F15_OR_ES_AVOID_NB_CYCLES_START)  CommonVoid,
+        (PF_F15_OR_ES_AVOID_NB_CYCLES_END)    CommonVoid,
+        (PF_F15_OR_ES_LOAD_MCU_PATCH)         LoadMicrocodePatch,
+        (PF_F15_OR_ES_AFTER_PATCH_LOADED)     CommonVoid
+      };
+    #endif
+
+    #if OPTION_EARLY_SAMPLES == TRUE
+      extern F_F15_OR_ES_HTC_INIT_HOOK F15OrHtcInitEarlySampleHook;
+
+      CONST F15_OR_ES_CORE_SUPPORT ROMDATA F15OrEarlySampleCoreSupport =
+      {
+        #if AGESA_ENTRY_INIT_EARLY == TRUE
+          F15OrHtcInitEarlySampleHook,
+        #else
+          (PF_F15_OR_ES_HTC_INIT_HOOK) CommonAssert,
+        #endif
+      };
+    #else
+      CONST F15_OR_ES_CORE_SUPPORT ROMDATA F15OrEarlySampleCoreSupport =
+      {
+        #if AGESA_ENTRY_INIT_EARLY == TRUE
+          (PF_F15_OR_ES_HTC_INIT_HOOK) CommonVoid,
+        #else
+          (PF_F15_OR_ES_HTC_INIT_HOOK) CommonAssert,
+        #endif
+      };
+    #endif
+
+    #define OPT_F15_OR_CPU {AMD_FAMILY_15_OR, &cpuF15OrServices},
+
+  #else  //  OPTION_FAMILY15H_OR == TRUE
+    #define OPT_F15_OR_CPU
+    #define OPT_F15_OR_ID
+  #endif  //  OPTION_FAMILY15H_OR == TRUE
+#else  //  defined (OPTION_FAMILY15H_OR)
+  #define OPT_F15_OR_CPU
+  #define OPT_F15_OR_ID
+#endif  //  defined (OPTION_FAMILY15H_OR)
+
+
+/*
+ * Install family 15h model 10h - 1Fh support
+ */
+#ifdef OPTION_FAMILY15H_TN
+  #if OPTION_FAMILY15H_TN == TRUE
+    extern F_CPU_GET_IDD_MAX F15TnGetProcIddMax;
+    extern F_CPU_GET_NB_PSTATE_INFO F15TnGetNbPstateInfo;
+    extern F_CPU_IS_NBCOF_INIT_NEEDED F15CommonGetNbCofVidUpdate;
+    extern F_CPU_GET_NB_IDD_MAX F15TnGetNbIddMax;
+    extern F_CPU_DISABLE_PSTATE F15DisablePstate;
+    extern F_CPU_TRANSITION_PSTATE F15TransitionPstate;
+    extern F_CPU_GET_TSC_RATE F15GetTscRate;
+    extern F_CPU_GET_NB_FREQ F15TnGetCurrentNbFrequency;
+    extern F_CPU_GET_MIN_MAX_NB_FREQ F15TnGetMinMaxNbFrequency;
+    extern F_CPU_AP_INITIAL_LAUNCH F15LaunchApCore;
+    extern F_CPU_NUMBER_OF_PHYSICAL_CORES F15TnGetNumberOfPhysicalCores;
+    extern F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE F15TnGetApMailboxFromHardware;
+    extern F_CPU_GET_AP_CORE_NUMBER F15TnGetApCoreNumber;
+    extern F_CORE_ID_POSITION_IN_INITIAL_APIC_ID F15CpuAmdCoreIdPositionInInitialApicId;
+    extern F_CPU_SET_WARM_RESET_FLAG F15SetAgesaWarmResetFlag;
+    extern F_CPU_GET_WARM_RESET_FLAG F15GetAgesaWarmResetFlag;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15CacheInfo;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15TnSysPmTable;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15WheaInitData;
+    extern F_CPU_SET_CFOH_REG SetF15TnCacheFlushOnHaltRegister;
+    extern F_NEXT_LINK_HAS_HTFPY_FEATS F15NextLinkHasHtPhyFeats;
+    extern F_SET_HT_PHY_REGISTER F15SetHtPhyRegister;
+    extern F_GET_NEXT_HT_LINK_FEATURES F15GetNextHtLinkFeatures;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15TnMicroCodePatchesStruct;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15TnMicrocodeEquivalenceTable;
+    extern F_GET_EARLY_INIT_TABLE GetF15TnEarlyInitOnCoreTable;
+    extern CONST REGISTER_TABLE ROMDATA F15TnPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15TnPciWorkaroundTable;
+    extern CONST REGISTER_TABLE ROMDATA F15TnMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15TnSharedMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15TnSharedMsrCuRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15TnSharedMsrWorkaroundTable;
+    extern CONST REGISTER_TABLE ROMDATA F15PciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15MsrRegisterTable;
+
+    /**
+     * Core Pair and core pair primary determination table.
+     *
+     * The two fields from the core pair hardware register can be used to determine whether
+     * even number cores are primary or all cores are primary.  It can be extended if it is
+     * decided to have other configs as well.  The other logically possible value sets are BitMapMapping,
+     * but they are currently not supported by the processor.
+     */
+    CONST CORE_PAIR_MAP ROMDATA HtFam15TnCorePairMapping[] =
+    {
+      {1, 1, EvenCoresMapping},                                     ///< 1 Compute Unit with 2 cores
+      {3, 3, EvenCoresMapping},                                     ///< 2 Compute Units both with 2 Cores
+      {1, 0, AllCoresMapping},                                      ///< 1 Compute Unit with 1 core
+      {3, 0, AllCoresMapping},                                      ///< 2 Compute Units both with 1 Core
+      {HT_LIST_TERMINAL, HT_LIST_TERMINAL, MaxComputeUnitMapping}   ///< End
+    };
+
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST REGISTER_TABLE ROMDATA *F15TnRegisterTables[] =
+      {
+        #if BASE_FAMILY_PCI == TRUE
+          &F15PciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F15TnPciRegisterTable,
+          &F15TnPciWorkaroundTable,
+        #endif
+        #if BASE_FAMILY_MSR == TRUE
+          &F15MsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F15TnMsrRegisterTable,
+          &F15TnSharedMsrRegisterTable,
+          &F15TnSharedMsrCuRegisterTable,
+          &F15TnSharedMsrWorkaroundTable,
+        #endif
+        // the end.
+        NULL
+      };
+    #endif
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F15TnTableEntryTypeDescriptors[] =
+      {
+        {MsrRegister, SetRegisterForMsrEntry},
+        {PciRegister, SetRegisterForPciEntry},
+        {FamSpecificWorkaround, SetRegisterForFamSpecificWorkaroundEntry},
+        {ProfileFixup, SetRegisterForPerformanceProfileEntry},
+        {CompUnitCountsMsr, SetMsrForComputeUnitCountsEntry},
+        {HtPhyRegister, SetRegisterForHtPhyEntry},
+        {HtPhyRangeRegister, SetRegisterForHtPhyRangeEntry},
+        {DeemphasisRegister, SetRegisterForDeemphasisEntry},
+        {HtPhyFreqRegister, SetRegisterForHtPhyFreqEntry},
+        {HtHostPciRegister, SetRegisterForHtHostEntry},
+        {HtHostPerfPciRegister, SetRegisterForHtHostPerfEntry},
+        {HtTokenPciRegister, SetRegisterForHtLinkTokenEntry},
+        {CoreCountsPciRegister, SetRegisterForCoreCountsPerformanceEntry},
+        {ProcCountsPciRegister, SetRegisterForProcessorCountsEntry},
+        {CompUnitCountsPciRegister, SetRegisterForComputeUnitCountsEntry},
+        {TokenPciRegister, SetRegisterForTokenPciEntry},
+        {HtFeatPciRegister, SetRegisterForHtFeaturePciEntry},
+        {HtLinkPciRegister, SetRegisterForHtLinkPciEntry},
+        // End
+        {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+      };
+    #endif
+
+    CONST CPU_SPECIFIC_SERVICES ROMDATA cpuF15TnServices =
+    {
+      0,
+      #if DISABLE_PSTATE == TRUE
+        F15DisablePstate,
+      #else
+        (PF_CPU_DISABLE_PSTATE) CommonAssert,
+      #endif
+      #if TRANSITION_PSTATE == TRUE
+        F15TransitionPstate,
+      #else
+        (PF_CPU_TRANSITION_PSTATE) CommonAssert,
+      #endif
+      #if PROC_IDD_MAX == TRUE
+        F15TnGetProcIddMax,
+      #else
+        (PF_CPU_GET_IDD_MAX) CommonAssert,
+      #endif
+      #if GET_TSC_RATE == TRUE
+        F15GetTscRate,
+      #else
+        (PF_CPU_GET_TSC_RATE) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F15TnGetCurrentNbFrequency,
+      #else
+        (PF_CPU_GET_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F15TnGetMinMaxNbFrequency,
+      #else
+        (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F15TnGetNbPstateInfo,
+      #else
+        (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert,
+      #endif
+      #if IS_NBCOF_INIT_NEEDED == TRUE
+        F15CommonGetNbCofVidUpdate,
+      #else
+        (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonAssert,
+      #endif
+      #if GET_NB_IDD_MAX == TRUE
+        (PF_CPU_GET_NB_IDD_MAX) F15TnGetNbIddMax,
+      #else
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #endif
+      #if AP_INITIAL_LAUNCH == TRUE
+        F15LaunchApCore,
+      #else
+        (PF_CPU_AP_INITIAL_LAUNCH) CommonAssert,
+      #endif
+      #if (BRAND_STRING1 == TRUE) || (BRAND_STRING2 == TRUE)
+        F15TnGetNumberOfPhysicalCores,
+      #else
+        (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonAssert,
+      #endif
+      #if GET_AP_MAILBOX_FROM_HW == TRUE
+        F15TnGetApMailboxFromHardware,
+      #else
+        (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert,
+      #endif
+      #if SET_AP_CORE_NUMBER == TRUE
+        (PF_CPU_SET_AP_CORE_NUMBER) CommonVoid,
+      #else
+        (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if GET_AP_CORE_NUMBER == TRUE
+        F15TnGetApCoreNumber,
+      #else
+        (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if TRANSFER_AP_CORE_NUMBER == TRUE
+        (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonVoid,
+      #else
+        (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if ID_POSITION_INITIAL_APICID == TRUE
+        F15CpuAmdCoreIdPositionInInitialApicId,
+      #else
+        (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonAssert,
+      #endif
+      #if SAVE_FEATURES == TRUE
+        (PF_CPU_SAVE_FEATURES) CommonVoid,
+      #else
+        (PF_CPU_SAVE_FEATURES) CommonAssert,
+      #endif
+      #if WRITE_FEATURES == TRUE
+        (PF_CPU_WRITE_FEATURES) CommonVoid,
+      #else
+        (PF_CPU_WRITE_FEATURES) CommonAssert,
+      #endif
+      #if SET_WARM_RESET_FLAG == TRUE
+        F15SetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_SET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if GET_WARM_RESET_FLAG == TRUE
+        F15GetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_GET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if BRAND_STRING1 == TRUE
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonVoid,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if BRAND_STRING2 == TRUE
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonVoid,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES == TRUE
+        GetF15TnMicroCodePatchesStruct,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES_EQUIVALENCE_TABLE == TRUE
+        GetF15TnMicrocodeEquivalenceTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_CACHE_INFO == TRUE
+        GetF15CacheInfo,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_SYSTEM_PM_TABLE == TRUE
+        GetF15TnSysPmTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_WHEA_INIT == TRUE
+        GetF15WheaInitData,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PLATFORM_TYPE_SPECIFIC_INFO == TRUE
+        (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonReturnAgesaSuccess,
+      #else
+        (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonAssert,
+      #endif
+      #if IS_NB_PSTATE_ENABLED == TRUE
+        F15IsNbPstateEnabled,
+      #else
+        (PF_IS_NB_PSTATE_ENABLED) CommonAssert,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F15NextLinkHasHtPhyFeats,
+      #else
+        (PF_NEXT_LINK_HAS_HTFPY_FEATS) CommonReturnFalse,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F15SetHtPhyRegister,
+      #else
+        (PF_SET_HT_PHY_REGISTER) CommonAssert,
+      #endif
+      #if BASE_FAMILY_PCI == TRUE
+        F15GetNextHtLinkFeatures,
+      #else
+        (PF_GET_NEXT_HT_LINK_FEATURES) CommonAssert,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (REGISTER_TABLE **) F15TnRegisterTables,
+      #else
+        NULL,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (TABLE_ENTRY_TYPE_DESCRIPTOR *) F15TnTableEntryTypeDescriptors,
+      #else
+        NULL,
+      #endif
+      #if MODEL_SPECIFIC_HT_PCI == TRUE
+        NULL,
+      #else
+        NULL,
+      #endif
+      (CORE_PAIR_MAP *) &HtFam15TnCorePairMapping,
+      InitCacheEnabled,
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        GetF15TnEarlyInitOnCoreTable
+      #else
+        (PF_GET_EARLY_INIT_TABLE) CommonVoid
+      #endif
+    };
+
+    #define TN_SOCKETS 1
+    #define TN_MODULES 1
+    #define TN_RECOVERY_SOCKETS 1
+    #define TN_RECOVERY_MODULES 1
+    extern F_CPU_GET_SUBFAMILY_ID_ARRAY GetF15TnLogicalIdAndRev;
+    #define OPT_F15_TN_ID (PF_CPU_GET_SUBFAMILY_ID_ARRAY) GetF15TnLogicalIdAndRev,
+    #ifndef ADVCFG_PLATFORM_SOCKETS
+      #define ADVCFG_PLATFORM_SOCKETS TN_SOCKETS
+    #else
+      #if ADVCFG_PLATFORM_SOCKETS < TN_SOCKETS
+        #undef ADVCFG_PLATFORM_SOCKETS
+        #define ADVCFG_PLATFORM_SOCKETS TN_SOCKETS
+      #endif
+    #endif
+    #ifndef ADVCFG_PLATFORM_MODULES
+      #define ADVCFG_PLATFORM_MODULES TN_MODULES
+    #else
+      #if ADVCFG_PLATFORM_MODULES < TN_MODULES
+        #undef ADVCFG_PLATFORM_MODULES
+        #define ADVCFG_PLATFORM_MODULES TN_MODULES
+      #endif
+    #endif
+
+    #if GET_PATCHES == TRUE
+      #define F15_TN_UCODE_04
+      #define F15_TN_UCODE_04_UNENC
+
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        #if OPTION_EARLY_SAMPLES == TRUE
+          extern  CONST UINT8 ROMDATA CpuF15TnMicrocodePatch06001004_Unenc [];
+          #undef F15_TN_UCODE_04_UNENC
+          #define F15_TN_UCODE_04_UNENC CpuF15TnMicrocodePatch06001004_Unenc,
+
+          extern  CONST UINT8 ROMDATA CpuF15TnMicrocodePatch06001004 [];
+          #undef F15_TN_UCODE_04
+          #define F15_TN_UCODE_04 CpuF15TnMicrocodePatch06001004,
+        #endif
+      #endif
+
+      CONST UINT8 ROMDATA *CpuF15TnMicroCodePatchArray[] =
+      {
+        F15_TN_UCODE_04
+        F15_TN_UCODE_04_UNENC
+        NULL
+      };
+
+      CONST UINT8 ROMDATA CpuF15TnNumberOfMicrocodePatches = (UINT8) ((sizeof (CpuF15TnMicroCodePatchArray) / sizeof (CpuF15TnMicroCodePatchArray[0])) - 1);
+    #endif
+
+    #if OPTION_EARLY_SAMPLES == TRUE
+      extern F_F15_TN_ES_LOAD_MCU_PATCH F15TnEarlySamplesLoadMicrocodePatch;
+
+      CONST F15_TN_ES_MCU_PATCH ROMDATA F15TnEarlySampleLoadMcuPatch =
+      {
+        F15TnEarlySamplesLoadMicrocodePatch
+      };
+    #else
+      CONST F15_TN_ES_MCU_PATCH ROMDATA F15TnEarlySampleLoadMcuPatch =
+      {
+        (PF_F15_TN_ES_LOAD_MCU_PATCH) LoadMicrocodePatch
+      };
+    #endif
+
+    #define OPT_F15_TN_CPU {AMD_FAMILY_15_TN, &cpuF15TnServices},
+
+  #else  //  OPTION_FAMILY15H_TN == TRUE
+    #define OPT_F15_TN_CPU
+    #define OPT_F15_TN_ID
+  #endif  //  OPTION_FAMILY15H_TN == TRUE
+#else  //  defined (OPTION_FAMILY15H_TN)
+  #define OPT_F15_TN_CPU
+  #define OPT_F15_TN_ID
+#endif  //  defined (OPTION_FAMILY15H_TN)
+
+/*
+ * Install family 15h model 20h - 2Fh support
+ */
+#ifdef OPTION_FAMILY15H_KM
+  #if OPTION_FAMILY15H_KM == TRUE
+    extern F_CPU_GET_IDD_MAX F15KmGetProcIddMax;
+    extern F_CPU_GET_NB_PSTATE_INFO F15KmGetNbPstateInfo;
+    extern F_CPU_IS_NBCOF_INIT_NEEDED F15CommonGetNbCofVidUpdate;
+    extern F_CPU_DISABLE_PSTATE F15DisablePstate;
+    extern F_CPU_TRANSITION_PSTATE F15TransitionPstate;
+    extern F_CPU_GET_TSC_RATE F15GetTscRate;
+    extern F_CPU_GET_NB_FREQ F15KmGetCurrentNbFrequency;
+    extern F_CPU_GET_MIN_MAX_NB_FREQ F15KmGetMinMaxNbFrequency;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15CacheInfo;
+    extern F_CPU_AP_INITIAL_LAUNCH F15LaunchApCore;
+    extern F_CPU_NUMBER_OF_PHYSICAL_CORES F15KmGetNumberOfPhysicalCores;
+    extern F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE F15KmGetApMailboxFromHardware;
+    extern F_CPU_SET_AP_CORE_NUMBER F15KmSetApCoreNumber;
+    extern F_CPU_GET_AP_CORE_NUMBER F15KmGetApCoreNumber;
+    extern F_CPU_TRANSFER_AP_CORE_NUMBER F15KmTransferApCoreNumber;
+    extern F_CORE_ID_POSITION_IN_INITIAL_APIC_ID F15CpuAmdCoreIdPositionInInitialApicId;
+    extern F_CPU_SET_WARM_RESET_FLAG F15SetAgesaWarmResetFlag;
+    extern F_CPU_GET_WARM_RESET_FLAG F15GetAgesaWarmResetFlag;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15KmSysPmTable;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15WheaInitData;
+    extern F_CPU_SET_CFOH_REG SetF15KmCacheFlushOnHaltRegister;
+    extern F_NEXT_LINK_HAS_HTFPY_FEATS F15NextLinkHasHtPhyFeats;
+    extern F_SET_HT_PHY_REGISTER F15SetHtPhyRegister;
+    extern F_GET_NEXT_HT_LINK_FEATURES F15GetNextHtLinkFeatures;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15KmMicroCodePatchesStruct;
+    extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY GetF15KmMicrocodeEquivalenceTable;
+    extern F_GET_EARLY_INIT_TABLE GetF15KmEarlyInitOnCoreTable;
+    extern CONST REGISTER_TABLE ROMDATA F15KmPciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15KmMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15KmSharedMsrRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15KmSharedMsrCuRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15PciRegisterTable;
+    extern CONST REGISTER_TABLE ROMDATA F15MsrRegisterTable;
+    extern CONST PACKAGE_HTLINK_MAP_ITEM ROMDATA HtFam15Mod2xPackageLinkMap[];
+    /**
+     * Core Pair and core pair primary determination table.
+     *
+     * The two fields from the core pair hardware register can be used to determine whether
+     * even number cores are primary or all cores are primary.  It can be extended if it is
+     * decided to have other configs as well.  The other logically possible value sets are BitMapMapping,
+     * but they are currently not supported by the processor.
+     */
+    CONST CORE_PAIR_MAP ROMDATA HtFam15KmCorePairMapping[] =
+    {
+      {1, 1, EvenCoresMapping},                                     ///< 1 Compute Unit with 2 cores
+      {3, 3, EvenCoresMapping},                                     ///< 2 Compute Units both with 2 Cores
+      {7, 7, EvenCoresMapping},                                     ///< 3 Compute Units all with 2 Cores
+      {0xF, 0xF, EvenCoresMapping},                                 ///< 4 Compute Units all with 2 Cores
+      {0x1F, 0x1F, EvenCoresMapping},                               ///< 5 Compute Units all with 2 Cores
+      {1, 0, AllCoresMapping},                                      ///< 1 Compute Unit with 1 core
+      {3, 0, AllCoresMapping},                                      ///< 2 Compute Units both with 1 Core
+      {7, 0, AllCoresMapping},                                      ///< 3 Compute Units all with 1 Core
+      {0xF, 0, AllCoresMapping},                                    ///< 4 Compute Units all with 1 Core
+      {0x1F, 0, AllCoresMapping},                                   ///< 5 Compute Units all with 1 Core
+      {HT_LIST_TERMINAL, HT_LIST_TERMINAL, MaxComputeUnitMapping}   ///< End
+    };
+
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST REGISTER_TABLE ROMDATA *F15KmRegisterTables[] =
+      {
+        #if BASE_FAMILY_PCI == TRUE
+          &F15PciRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_PCI == TRUE
+          &F15KmPciRegisterTable,
+        #endif
+        #if BASE_FAMILY_MSR == TRUE
+          &F15MsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F15KmMsrRegisterTable,
+        #endif
+        #if MODEL_SPECIFIC_MSR == TRUE
+          &F15KmSharedMsrRegisterTable,
+          &F15KmSharedMsrCuRegisterTable,
+        #endif
+        // the end.
+        NULL
+      };
+    #endif
+
+    #if USES_REGISTER_TABLES == TRUE
+      CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F15KmTableEntryTypeDescriptors[] =
+      {
+        {MsrRegister, SetRegisterForMsrEntry},
+        {PciRegister, SetRegisterForPciEntry},
+        {FamSpecificWorkaround, SetRegisterForFamSpecificWorkaroundEntry},
+        {HtPhyRegister, SetRegisterForHtPhyEntry},
+        {HtPhyRangeRegister, SetRegisterForHtPhyRangeEntry},
+        {DeemphasisRegister, SetRegisterForDeemphasisEntry},
+        {HtPhyFreqRegister, SetRegisterForHtPhyFreqEntry},
+        {ProfileFixup, SetRegisterForPerformanceProfileEntry},
+        {HtHostPciRegister, SetRegisterForHtHostEntry},
+        {HtHostPerfPciRegister, SetRegisterForHtHostPerfEntry},
+        {HtTokenPciRegister, SetRegisterForHtLinkTokenEntry},
+        {CoreCountsPciRegister, SetRegisterForCoreCountsPerformanceEntry},
+        {ProcCountsPciRegister, SetRegisterForProcessorCountsEntry},
+        {CompUnitCountsPciRegister, SetRegisterForComputeUnitCountsEntry},
+        {TokenPciRegister, SetRegisterForTokenPciEntry},
+        {HtFeatPciRegister, SetRegisterForHtFeaturePciEntry},
+        {HtLinkPciRegister, SetRegisterForHtLinkPciEntry},
+        {CompUnitCountsMsr, SetMsrForComputeUnitCountsEntry},
+        // End
+        {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+      };
+    #endif
+
+    CONST CPU_SPECIFIC_SERVICES ROMDATA cpuF15KmServices =
+    {
+      0,
+      #if DISABLE_PSTATE == TRUE
+        F15DisablePstate,
+      #else
+        (PF_CPU_DISABLE_PSTATE) CommonAssert,
+      #endif
+      #if TRANSITION_PSTATE == TRUE
+        F15TransitionPstate,
+      #else
+        (PF_CPU_TRANSITION_PSTATE) CommonAssert,
+      #endif
+      #if PROC_IDD_MAX == TRUE
+        F15KmGetProcIddMax,
+      #else
+        (PF_CPU_GET_IDD_MAX) CommonAssert,
+      #endif
+      #if GET_TSC_RATE == TRUE
+        F15GetTscRate,
+      #else
+        (PF_CPU_GET_TSC_RATE) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F15KmGetCurrentNbFrequency,
+      #else
+        (PF_CPU_GET_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F15KmGetMinMaxNbFrequency,
+      #else
+        (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert,
+      #endif
+      #if GET_NB_FREQ == TRUE
+        F15KmGetNbPstateInfo,
+      #else
+        (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert,
+      #endif
+      #if IS_NBCOF_INIT_NEEDED == TRUE
+        F15CommonGetNbCofVidUpdate,
+      #else
+        (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonAssert,
+      #endif
+      #if GET_NB_IDD_MAX == TRUE
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #else
+        (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+      #endif
+      #if AP_INITIAL_LAUNCH == TRUE
+        F15LaunchApCore,
+      #else
+        (PF_CPU_AP_INITIAL_LAUNCH) CommonAssert,
+      #endif
+      #if (BRAND_STRING1 == TRUE) || (BRAND_STRING2 == TRUE)
+        F15KmGetNumberOfPhysicalCores,
+      #else
+        (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonAssert,
+      #endif
+      #if GET_AP_MAILBOX_FROM_HW == TRUE
+        F15KmGetApMailboxFromHardware,
+      #else
+        (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert,
+      #endif
+      #if SET_AP_CORE_NUMBER == TRUE
+        F15KmSetApCoreNumber,
+      #else
+        (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if GET_AP_CORE_NUMBER == TRUE
+        F15KmGetApCoreNumber,
+      #else
+        (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if TRANSFER_AP_CORE_NUMBER == TRUE
+        F15KmTransferApCoreNumber,
+      #else
+        (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert,
+      #endif
+      #if ID_POSITION_INITIAL_APICID == TRUE
+        F15CpuAmdCoreIdPositionInInitialApicId,
+      #else
+        (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonAssert,
+      #endif
+      #if SAVE_FEATURES == TRUE
+        (PF_CPU_SAVE_FEATURES) CommonVoid,
+      #else
+        (PF_CPU_SAVE_FEATURES) CommonAssert,
+      #endif
+      #if WRITE_FEATURES == TRUE
+        (PF_CPU_WRITE_FEATURES) CommonVoid,
+      #else
+        (PF_CPU_WRITE_FEATURES) CommonAssert,
+      #endif
+      #if SET_WARM_RESET_FLAG == TRUE
+        F15SetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_SET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if GET_WARM_RESET_FLAG == TRUE
+        F15GetAgesaWarmResetFlag,
+      #else
+        (PF_CPU_GET_WARM_RESET_FLAG) CommonAssert,
+      #endif
+      #if BRAND_STRING1 == TRUE
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonVoid,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if BRAND_STRING2 == TRUE
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonVoid,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES == TRUE
+        GetF15KmMicroCodePatchesStruct,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PATCHES_EQUIVALENCE_TABLE == TRUE
+        GetF15KmMicrocodeEquivalenceTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_CACHE_INFO == TRUE
+        GetF15CacheInfo,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_SYSTEM_PM_TABLE == TRUE
+        GetF15KmSysPmTable,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_WHEA_INIT == TRUE
+        GetF15WheaInitData,
+      #else
+        (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+      #endif
+      #if GET_PLATFORM_TYPE_SPECIFIC_INFO == TRUE
+        (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonReturnAgesaSuccess,
+      #else
+        (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonAssert,
+      #endif
+      #if IS_NB_PSTATE_ENABLED == TRUE
+        F15IsNbPstateEnabled,
+      #else
+        (PF_IS_NB_PSTATE_ENABLED) CommonAssert,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F15NextLinkHasHtPhyFeats,
+      #else
+        (PF_NEXT_LINK_HAS_HTFPY_FEATS) CommonReturnFalse,
+      #endif
+      #if (BASE_FAMILY_HT_PCI == TRUE)
+        F15SetHtPhyRegister,
+      #else
+        (PF_SET_HT_PHY_REGISTER) CommonAssert,
+      #endif
+      #if BASE_FAMILY_PCI == TRUE
+        F15GetNextHtLinkFeatures,
+      #else
+        (PF_GET_NEXT_HT_LINK_FEATURES) CommonAssert,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (REGISTER_TABLE **) F15KmRegisterTables,
+      #else
+        NULL,
+      #endif
+      #if USES_REGISTER_TABLES == TRUE
+        (TABLE_ENTRY_TYPE_DESCRIPTOR *) F15KmTableEntryTypeDescriptors,
+      #else
+        NULL,
+      #endif
+      #if MODEL_SPECIFIC_HT_PCI == TRUE
+        (PACKAGE_HTLINK_MAP) &HtFam15Mod2xPackageLinkMap,
+      #else
+        NULL,
+      #endif
+      (CORE_PAIR_MAP *) &HtFam15KmCorePairMapping,
+      InitCacheEnabled,
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        GetF15KmEarlyInitOnCoreTable
+      #else
+        (PF_GET_EARLY_INIT_TABLE) CommonVoid
+      #endif
+    };
+
+    #define KM_SOCKETS 8
+    #define KM_MODULES 2
+    #define KM_RECOVERY_SOCKETS 1
+    #define KM_RECOVERY_MODULES 1
+    extern F_CPU_GET_SUBFAMILY_ID_ARRAY GetF15KmLogicalIdAndRev;
+    #define OPT_F15_KM_ID (PF_CPU_GET_SUBFAMILY_ID_ARRAY) GetF15KmLogicalIdAndRev,
+    #ifndef ADVCFG_PLATFORM_SOCKETS
+      #define ADVCFG_PLATFORM_SOCKETS KM_SOCKETS
+    #else
+      #if ADVCFG_PLATFORM_SOCKETS < KM_SOCKETS
+        #undef ADVCFG_PLATFORM_SOCKETS
+        #define ADVCFG_PLATFORM_SOCKETS KM_SOCKETS
+      #endif
+    #endif
+    #ifndef ADVCFG_PLATFORM_MODULES
+      #define ADVCFG_PLATFORM_MODULES KM_MODULES
+    #else
+      #if ADVCFG_PLATFORM_MODULES < KM_MODULES
+        #undef ADVCFG_PLATFORM_MODULES
+        #define ADVCFG_PLATFORM_MODULES KM_MODULES
+      #endif
+    #endif
+
+    #if GET_PATCHES == TRUE
+
+      #if AGESA_ENTRY_INIT_EARLY == TRUE
+        #if OPTION_EARLY_SAMPLES == TRUE
+        #endif
+      #endif
+
+      CONST MICROCODE_PATCHES_4K ROMDATA *CpuF15KmMicroCodePatchArray[] =
+      {
+        NULL
+      };
+
+      CONST UINT8 ROMDATA CpuF15KmNumberOfMicrocodePatches = (UINT8) ((sizeof (CpuF15KmMicroCodePatchArray) / sizeof (CpuF15KmMicroCodePatchArray[0])) - 1);
+    #endif
+
+    #define OPT_F15_KM_CPU {AMD_FAMILY_15_KM, &cpuF15KmServices},
+
+  #else  //  OPTION_FAMILY15H_KM == TRUE
+    #define OPT_F15_KM_CPU
+    #define OPT_F15_KM_ID
+  #endif  //  OPTION_FAMILY15H_KM == TRUE
+#else  //  defined (OPTION_FAMILY15H_KM)
+  #define OPT_F15_KM_CPU
+  #define OPT_F15_KM_ID
+#endif  //  defined (OPTION_FAMILY15H_KM)
+
+/*
+ * Install unknown family 15h support
+ */
+
+
+#if USES_REGISTER_TABLES == TRUE
+  CONST REGISTER_TABLE ROMDATA *F15UnknownRegisterTables[] =
+  {
+    #if BASE_FAMILY_PCI == TRUE
+      &F15PciRegisterTable,
+    #endif
+    #if BASE_FAMILY_MSR == TRUE
+      &F15MsrRegisterTable,
+    #endif
+    // the end.
+    NULL
+  };
+#endif
+
+#if USES_REGISTER_TABLES == TRUE
+  CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F15UnknownTableEntryTypeDescriptors[] =
+  {
+    {MsrRegister, SetRegisterForMsrEntry},
+    {PciRegister, SetRegisterForPciEntry},
+    {FamSpecificWorkaround, SetRegisterForFamSpecificWorkaroundEntry},
+    {HtPhyRegister, SetRegisterForHtPhyEntry},
+    {HtPhyRangeRegister, SetRegisterForHtPhyRangeEntry},
+    {DeemphasisRegister, SetRegisterForDeemphasisEntry},
+    {ProfileFixup, SetRegisterForPerformanceProfileEntry},
+    {HtHostPciRegister, SetRegisterForHtHostEntry},
+    {HtHostPerfPciRegister, SetRegisterForHtHostPerfEntry},
+    {HtTokenPciRegister, (PF_DO_TABLE_ENTRY)CommonVoid},
+    {CoreCountsPciRegister, SetRegisterForCoreCountsPerformanceEntry},
+    {ProcCountsPciRegister, SetRegisterForProcessorCountsEntry},
+    {CompUnitCountsPciRegister, SetRegisterForComputeUnitCountsEntry},
+    {HtFeatPciRegister, SetRegisterForHtFeaturePciEntry},
+    {CompUnitCountsMsr, SetMsrForComputeUnitCountsEntry},
+    // End
+    {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+  };
+#endif
+
+
+CONST CPU_SPECIFIC_SERVICES ROMDATA cpuF15UnknownServices =
+{
+  0,
+  #if DISABLE_PSTATE == TRUE
+    F15DisablePstate,
+  #else
+    (PF_CPU_DISABLE_PSTATE) CommonAssert,
+  #endif
+  #if TRANSITION_PSTATE == TRUE
+    F15TransitionPstate,
+  #else
+    (PF_CPU_TRANSITION_PSTATE) CommonAssert,
+  #endif
+  #if PROC_IDD_MAX == TRUE
+    (PF_CPU_GET_IDD_MAX) CommonReturnFalse,
+  #else
+    (PF_CPU_GET_IDD_MAX) CommonAssert,
+  #endif
+  #if GET_TSC_RATE == TRUE
+    F15GetTscRate,
+  #else
+    (PF_CPU_GET_TSC_RATE) CommonAssert,
+  #endif
+  #if GET_NB_FREQ == TRUE
+    (PF_CPU_GET_NB_FREQ) CommonAssert,
+  #else
+    (PF_CPU_GET_NB_FREQ) CommonAssert,
+  #endif
+  #if GET_NB_FREQ == TRUE
+    (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert,
+  #else
+    (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert,
+  #endif
+  #if GET_NB_FREQ == TRUE
+    (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert,
+  #else
+    (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert,
+  #endif
+  #if IS_NBCOF_INIT_NEEDED == TRUE
+    (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonReturnFalse,
+  #else
+    (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonAssert,
+  #endif
+  #if GET_NB_IDD_MAX == TRUE
+    (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+  #else
+    (PF_CPU_GET_NB_IDD_MAX) CommonAssert,
+  #endif
+  #if AP_INITIAL_LAUNCH == TRUE
+    F15LaunchApCore,
+  #else
+    (PF_CPU_AP_INITIAL_LAUNCH) CommonAssert,
+  #endif
+  #if (BRAND_STRING1 == TRUE) || (BRAND_STRING2 == TRUE)
+    (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonVoid,
+  #else
+    (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonAssert,
+  #endif
+  #if GET_AP_MAILBOX_FROM_HW == TRUE
+    (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert,
+  #else
+    (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert,
+  #endif
+  #if SET_AP_CORE_NUMBER == TRUE
+    (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert,
+  #else
+    (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert,
+  #endif
+  #if GET_AP_CORE_NUMBER == TRUE
+    (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert,
+  #else
+    (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert,
+  #endif
+  #if TRANSFER_AP_CORE_NUMBER == TRUE
+    (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert,
+  #else
+    (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert,
+  #endif
+  #if ID_POSITION_INITIAL_APICID == TRUE
+    F15CpuAmdCoreIdPositionInInitialApicId,
+  #else
+    (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonAssert,
+  #endif
+  #if SAVE_FEATURES == TRUE
+    // F15SaveFeatures,
+    (PF_CPU_SAVE_FEATURES) CommonVoid,
+  #else
+    (PF_CPU_SAVE_FEATURES) CommonAssert,
+  #endif
+  #if WRITE_FEATURES == TRUE
+    // F15WriteFeatures,
+    (PF_CPU_WRITE_FEATURES) CommonVoid,
+  #else
+    (PF_CPU_WRITE_FEATURES) CommonAssert,
+  #endif
+  #if SET_WARM_RESET_FLAG == TRUE
+    F15SetAgesaWarmResetFlag,
+  #else
+    (PF_CPU_SET_WARM_RESET_FLAG) CommonAssert,
+  #endif
+  #if GET_WARM_RESET_FLAG == TRUE
+    F15GetAgesaWarmResetFlag,
+  #else
+    (PF_CPU_GET_WARM_RESET_FLAG) CommonAssert,
+  #endif
+  #if BRAND_STRING1 == TRUE
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonVoid,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if BRAND_STRING2 == TRUE
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonVoid,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_PATCHES == TRUE
+    GetEmptyArray,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_PATCHES_EQUIVALENCE_TABLE == TRUE
+    GetEmptyArray,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_CACHE_INFO == TRUE
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonVoid,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_SYSTEM_PM_TABLE == TRUE
+    GetEmptyArray,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_WHEA_INIT == TRUE
+    GetF15WheaInitData,
+  #else
+    (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert,
+  #endif
+  #if GET_PLATFORM_TYPE_SPECIFIC_INFO == TRUE
+    (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonReturnAgesaSuccess,
+  #else
+    (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonAssert,
+  #endif
+  #if IS_NB_PSTATE_ENABLED == TRUE
+    F15IsNbPstateEnabled,
+  #else
+    (PF_IS_NB_PSTATE_ENABLED) CommonAssert,
+  #endif
+  #if (BASE_FAMILY_HT_PCI == TRUE)
+    F15NextLinkHasHtPhyFeats,
+  #else
+    (PF_NEXT_LINK_HAS_HTFPY_FEATS) CommonReturnFalse,
+  #endif
+  #if (BASE_FAMILY_HT_PCI == TRUE)
+    F15SetHtPhyRegister,
+  #else
+    (PF_SET_HT_PHY_REGISTER) CommonVoid,
+  #endif
+  #if BASE_FAMILY_PCI == TRUE
+    F15GetNextHtLinkFeatures,
+  #else
+    (PF_GET_NEXT_HT_LINK_FEATURES) CommonAssert,
+  #endif
+  #if USES_REGISTER_TABLES == TRUE
+    (REGISTER_TABLE **) F15UnknownRegisterTables,
+  #else
+    NULL,
+  #endif
+  #if USES_REGISTER_TABLES == TRUE
+    (TABLE_ENTRY_TYPE_DESCRIPTOR *) F15UnknownTableEntryTypeDescriptors,
+  #else
+    NULL,
+  #endif
+  NULL,
+  NULL,
+  InitCacheEnabled,
+  #if AGESA_ENTRY_INIT_EARLY == TRUE
+    (PF_GET_EARLY_INIT_TABLE) CommonVoid
+  #else
+    (PF_GET_EARLY_INIT_TABLE) CommonVoid
+  #endif
+};
+
+// Family 15h maximum base address is 48 bits. Limit BLDCFG to 48 bits, if appropriate.
+#if (FAMILY_MMIO_BASE_MASK < 0xFFFF000000000000ull)
+  #undef  FAMILY_MMIO_BASE_MASK
+  #define FAMILY_MMIO_BASE_MASK (0xFFFF000000000000ull)
+#endif
+
+
+#undef OPT_F15_ID_TABLE
+#define OPT_F15_ID_TABLE {0x15, {AMD_FAMILY_15, AMD_F15_UNKNOWN}, F15LogicalIdTable, (sizeof (F15LogicalIdTable) / sizeof (F15LogicalIdTable[0]))},
+#define OPT_F15_UNKNOWN_CPU {AMD_FAMILY_15, &cpuF15UnknownServices},
+
+#undef OPT_F15_TABLE
+#define OPT_F15_TABLE   OPT_F15_OR_CPU OPT_F15_TN_CPU OPT_F15_KM_CPU OPT_F15_UNKNOWN_CPU
+
+
+#if OPTION_G34_SOCKET_SUPPORT == TRUE
+  #define F15_G34_BRANDSTRING1 NULL,
+  #define F15_G34_BRANDSTRING2 NULL,
+#else
+  #define F15_G34_BRANDSTRING1
+  #define F15_G34_BRANDSTRING2
+#endif
+#if OPTION_C32_SOCKET_SUPPORT == TRUE
+  #define F15_C32_BRANDSTRING1 NULL,
+  #define F15_C32_BRANDSTRING2 NULL,
+#else
+  #define F15_C32_BRANDSTRING1
+  #define F15_C32_BRANDSTRING2
+#endif
+#if OPTION_AM3_SOCKET_SUPPORT == TRUE
+  #define F15_AM3_BRANDSTRING1 NULL,
+  #define F15_AM3_BRANDSTRING2 NULL,
+#else
+  #define F15_AM3_BRANDSTRING1
+  #define F15_AM3_BRANDSTRING2
+#endif
+#if OPTION_FS1_SOCKET_SUPPORT == TRUE
+  #define F15_FS1_BRANDSTRING1 NULL,
+  #define F15_FS1_BRANDSTRING2 NULL,
+#else
+  #define F15_FS1_BRANDSTRING1
+  #define F15_FS1_BRANDSTRING2
+#endif
+#if OPTION_FM2_SOCKET_SUPPORT == TRUE
+  #define F15_FM2_BRANDSTRING1 NULL,
+  #define F15_FM2_BRANDSTRING2 NULL,
+#else
+  #define F15_FM2_BRANDSTRING1
+  #define F15_FM2_BRANDSTRING2
+#endif
+#if OPTION_FP2_SOCKET_SUPPORT == TRUE
+  #define F15_FP2_BRANDSTRING1 NULL,
+  #define F15_FP2_BRANDSTRING2 NULL,
+#else
+  #define F15_FP2_BRANDSTRING1
+  #define F15_FP2_BRANDSTRING2
+#endif
+#if OPTION_G2012_SOCKET_SUPPORT == TRUE
+  #define F15_G2012_BRANDSTRING1 NULL,
+  #define F15_G2012_BRANDSTRING2 NULL,
+#else
+  #define F15_G2012_BRANDSTRING1
+  #define F15_G2012_BRANDSTRING2
+#endif
+#if OPTION_C2012_SOCKET_SUPPORT == TRUE
+  #define F15_C2012_BRANDSTRING1 NULL,
+  #define F15_C2012_BRANDSTRING2 NULL,
+#else
+  #define F15_C2012_BRANDSTRING1
+  #define F15_C2012_BRANDSTRING2
+#endif
+
+
+#if BRAND_STRING1 == TRUE
+  CONST CPU_BRAND_TABLE ROMDATA *F15BrandIdString1Tables[] =
+  {
+    F15_G34_BRANDSTRING1
+    F15_C32_BRANDSTRING1
+    F15_AM3_BRANDSTRING1
+    F15_FS1_BRANDSTRING1
+    F15_FM2_BRANDSTRING1
+    F15_FP2_BRANDSTRING1
+    F15_G2012_BRANDSTRING1
+    F15_C2012_BRANDSTRING1
+  };
+
+  CONST UINT8 F15BrandIdString1TableCount = (sizeof (F15BrandIdString1Tables) / sizeof (F15BrandIdString1Tables[0]));
+#endif
+
+#if BRAND_STRING2 == TRUE
+  CONST CPU_BRAND_TABLE ROMDATA *F15BrandIdString2Tables[] =
+  {
+    F15_G34_BRANDSTRING2
+    F15_C32_BRANDSTRING2
+    F15_AM3_BRANDSTRING2
+    F15_FS1_BRANDSTRING2
+    F15_FM2_BRANDSTRING2
+    F15_FP2_BRANDSTRING2
+    F15_G2012_BRANDSTRING2
+    F15_C2012_BRANDSTRING2
+  };
+
+  CONST UINT8 F15BrandIdString2TableCount = (sizeof (F15BrandIdString2Tables) / sizeof (F15BrandIdString2Tables[0]));
+#endif
+
+CONST PF_CPU_GET_SUBFAMILY_ID_ARRAY ROMDATA F15LogicalIdTable[] =
+{
+  OPT_F15_OR_ID
+  OPT_F15_TN_ID
+  OPT_F15_KM_ID
+};
+
+#endif  // _OPTION_FAMILY_15H_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionFchInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionFchInstall.h
new file mode 100644
index 0000000000..715e1628d5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionFchInstall.h
@@ -0,0 +1,988 @@
+/*********************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*********************************************************************************/
+
+#ifndef _OPTION_FCH_INSTALL_H_
+#define _OPTION_FCH_INSTALL_H_
+
+#include "AmdFch.h"
+
+#define  FCH_SUPPORT   FALSE
+
+
+/* ACPI block register offset definitions */
+#define PM1_STATUS_OFFSET              0x00
+#define PM1_ENABLE_OFFSET              0x02
+#define PM_CONTROL_OFFSET              0x04
+#define PM_TIMER_OFFSET                0x08
+#define CPU_CONTROL_OFFSET             0x10
+#define EVENT_STATUS_OFFSET            0x20
+#define EVENT_ENABLE_OFFSET            0x24
+
+
+#if  FCH_SUPPORT == TRUE
+  /*
+   * FCH subfunctions
+   */
+  #ifdef AGESA_ENTRY_INIT_RESET
+    #if AGESA_ENTRY_INIT_RESET == TRUE
+      extern FCH_TASK_ENTRY    FchInitResetHwAcpiP;
+      extern FCH_TASK_ENTRY    FchInitResetHwAcpi;
+      extern FCH_TASK_ENTRY    FchInitResetAb;
+      extern FCH_TASK_ENTRY    FchInitResetSpi;
+      extern FCH_TASK_ENTRY    FchInitResetGec;
+      extern FCH_TASK_ENTRY    FchInitResetSata;
+      extern FCH_TASK_ENTRY    FchInitResetLpc;
+      extern FCH_TASK_ENTRY    FchInitResetPcib;
+      extern FCH_TASK_ENTRY    FchInitResetPcie;
+      extern FCH_TASK_ENTRY    FchInitResetGpp;
+      extern FCH_TASK_ENTRY    FchInitResetUsb;
+      extern FCH_TASK_ENTRY    FchInitResetEhci;
+      extern FCH_TASK_ENTRY    FchInitResetOhci;
+      extern FCH_TASK_ENTRY    FchInitResetXhci;
+      extern FCH_TASK_ENTRY    FchInitResetImc;
+    #endif
+  #endif
+
+  #ifdef AGESA_ENTRY_INIT_ENV
+    #if AGESA_ENTRY_INIT_ENV == TRUE
+      extern FCH_TASK_ENTRY    FchInitEnvUsbXhci;
+      extern FCH_TASK_ENTRY    FchInitEnvUsbOhci;
+      extern FCH_TASK_ENTRY    FchInitEnvUsbEhci;
+      extern FCH_TASK_ENTRY    FchInitEnvUsb;
+      extern FCH_TASK_ENTRY    FchInitEnvAb;
+      extern FCH_TASK_ENTRY    FchInitEnvGpp;
+      extern FCH_TASK_ENTRY    FchInitEnvPcie;
+      extern FCH_TASK_ENTRY    FchInitEnvPcib;
+      extern FCH_TASK_ENTRY    FchInitEnvHwAcpiP;
+      extern FCH_TASK_ENTRY    FchInitEnvHwAcpi;
+      extern FCH_TASK_ENTRY    FchInitEnvAbSpecial;
+      extern FCH_TASK_ENTRY    FchInitEnvSpi;
+      extern FCH_TASK_ENTRY    FchInitEnvGec;
+      extern FCH_TASK_ENTRY    FchInitEnvSata;
+      extern FCH_TASK_ENTRY    FchInitEnvIde;
+      extern FCH_TASK_ENTRY    FchInitEnvSd;
+      extern FCH_TASK_ENTRY    FchInitEnvIr;
+      extern FCH_TASK_ENTRY    FchInitEnvAzalia;
+      extern FCH_TASK_ENTRY    FchInitEnvHwm;
+      extern FCH_TASK_ENTRY    FchInitEnvImc;
+    #endif
+  #endif
+
+  #ifdef AGESA_ENTRY_INIT_MID
+    #if AGESA_ENTRY_INIT_MID == TRUE
+      extern FCH_TASK_ENTRY    FchInitMidHwm;
+      extern FCH_TASK_ENTRY    FchInitMidAzalia;
+      extern FCH_TASK_ENTRY    FchInitMidGec;
+      extern FCH_TASK_ENTRY    FchInitMidSata;
+      extern FCH_TASK_ENTRY    FchInitMidIde;
+      extern FCH_TASK_ENTRY    FchInitMidAb;
+      extern FCH_TASK_ENTRY    FchInitMidUsb;
+      extern FCH_TASK_ENTRY    FchInitMidUsbEhci;
+      extern FCH_TASK_ENTRY    FchInitMidUsbOhci;
+      extern FCH_TASK_ENTRY    FchInitMidUsbXhci;
+      extern FCH_TASK_ENTRY    FchInitMidImc;
+    #endif
+  #endif
+
+  #ifdef AGESA_ENTRY_INIT_LATE
+    #if AGESA_ENTRY_INIT_LATE == TRUE
+      extern FCH_TASK_ENTRY    FchInitLateHwAcpi;
+      extern FCH_TASK_ENTRY    FchInitLateSpi;
+      extern FCH_TASK_ENTRY    FchInitLateGec;
+      extern FCH_TASK_ENTRY    FchInitLateSata;
+      extern FCH_TASK_ENTRY    FchInitLateIde;
+      extern FCH_TASK_ENTRY    FchInitLatePcib;
+      extern FCH_TASK_ENTRY    FchInitLateAb;
+      extern FCH_TASK_ENTRY    FchInitLatePcie;
+      extern FCH_TASK_ENTRY    FchInitLateGpp;
+      extern FCH_TASK_ENTRY    FchInitLateUsb;
+      extern FCH_TASK_ENTRY    FchInitLateUsbEhci;
+      extern FCH_TASK_ENTRY    FchInitLateUsbOhci;
+      extern FCH_TASK_ENTRY    FchInitLateUsbXhci;
+      extern FCH_TASK_ENTRY    FchInitLateImc;
+      extern FCH_TASK_ENTRY    FchInitLateAzalia;
+      extern FCH_TASK_ENTRY    FchInitLateHwm;
+    #endif
+  #endif
+
+  extern FCH_TASK_ENTRY    FchTaskDummy;
+  extern FCH_TASK_ENTRY    FchGppHotplugSmiCallback;
+  /* FCH Interface entries */
+  extern  FCH_INIT     CommonFchInitStub;
+
+  /* FCH Interface entries */
+  #ifdef AGESA_ENTRY_INIT_RESET
+    #if AGESA_ENTRY_INIT_RESET == TRUE
+      extern  FCH_INIT      FchInitReset;
+      extern  FCH_INIT      FchResetConstructor;
+
+      #define FP_FCH_INIT_RESET              &FchInitReset
+      #define FP_FCH_INIT_RESET_CONSTRUCT    &FchResetConstructor
+    #else
+      #define FP_FCH_INIT_RESET              &CommonFchInitStub
+      #define FP_FCH_INIT_RESET_CONSTRUCT    &CommonFchInitStub
+    #endif
+  #endif
+
+  #ifdef AGESA_ENTRY_INIT_ENV
+    #if AGESA_ENTRY_INIT_ENV == TRUE
+      extern  FCH_INIT      FchInitEnv;
+      extern  FCH_INIT      FchEnvConstructor;
+
+      #define FP_FCH_INIT_ENV                &FchInitEnv
+      #define FP_FCH_INIT_ENV_CONSTRUCT      &FchEnvConstructor
+    #else
+      #define FP_FCH_INIT_ENV                &CommonFchInitStub
+      #define FP_FCH_INIT_ENV_CONSTRUCT      &CommonFchInitStub
+    #endif
+  #endif
+
+  #ifdef AGESA_ENTRY_INIT_MID
+    #if AGESA_ENTRY_INIT_MID == TRUE
+      extern  FCH_INIT      FchInitMid;
+      extern  FCH_INIT      FchMidConstructor;
+
+      #define FP_FCH_INIT_MID                &FchInitMid
+      #define FP_FCH_INIT_MID_CONSTRUCT      &FchMidConstructor
+    #else
+      #define FP_FCH_INIT_MID                &CommonFchInitStub
+      #define FP_FCH_INIT_MID_CONSTRUCT      &CommonFchInitStub
+    #endif
+  #endif
+
+  #ifdef AGESA_ENTRY_INIT_LATE
+    #if AGESA_ENTRY_INIT_LATE == TRUE
+      extern  FCH_INIT      FchInitLate;
+      extern  FCH_INIT      FchLateConstructor;
+
+      #define FP_FCH_INIT_LATE               &FchInitLate
+      #define FP_FCH_INIT_LATE_CONSTRUCT     &FchLateConstructor
+    #else
+      #define FP_FCH_INIT_LATE               &CommonFchInitStub
+      #define FP_FCH_INIT_LATE_CONSTRUCT     &CommonFchInitStub
+    #endif
+  #endif
+
+  /* FCH subcomponent build options */
+  #undef  FCH_NO_HWACPI_SUPPORT
+  #undef  FCH_NO_AB_SUPPORT
+  #undef  FCH_NO_SPI_SUPPORT
+  #undef  FCH_NO_GEC_SUPPORT
+  #undef  FCH_NO_SATA_SUPPORT
+  #undef  FCH_NO_IDE_SUPPORT
+  #undef  FCH_NO_LPC_SUPPORT
+  #undef  FCH_NO_PCIB_SUPPORT
+  #undef  FCH_NO_PCIE_SUPPORT
+  #undef  FCH_NO_GPP_SUPPORT
+  #undef  FCH_NO_USB_SUPPORT
+  #undef  FCH_NO_EHCI_SUPPORT
+  #undef  FCH_NO_OHCI_SUPPORT
+  #undef  FCH_NO_XHCI_SUPPORT
+  #undef  FCH_NO_IMC_SUPPORT
+  #undef  FCH_NO_SD_SUPPORT
+  #undef  FCH_NO_IR_SUPPORT
+  #undef  FCH_NO_AZALIA_SUPPORT
+  #undef  FCH_NO_HWM_SUPPORT
+
+  //
+  // Installable blocks depending on build switches
+  //
+  #ifndef FCH_NO_HWACPI_SUPPORT
+    #define BLOCK_HWACPI_SIZE           sizeof (FCH_ACPI)
+    #define InstallFchInitResetHwAcpiP  &FchInitResetHwAcpiP
+    #define InstallFchInitResetHwAcpi   &FchInitResetHwAcpi
+    #define InstallFchInitEnvHwAcpiP    &FchInitEnvHwAcpiP
+    #define InstallFchInitEnvHwAcpi     &FchInitEnvHwAcpi
+    #define InstallFchInitMidHwAcpi     &FchTaskDummy
+    #define InstallFchInitLateHwAcpi    &FchInitLateHwAcpi
+  #else
+    #define BLOCK_HWACPI_SIZE           0
+    #define InstallFchInitResetHwAcpiP  &FchTaskDummy
+    #define InstallFchInitResetHwAcpi   &FchTaskDummy
+    #define InstallFchInitEnvHwAcpi     &FchTaskDummy
+    #define InstallFchInitMidHwAcpi     &FchTaskDummy
+    #define InstallFchInitLateHwAcpi    &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_AB_SUPPORT
+    #define BLOCK_AB_SIZE               sizeof (FCH_AB)
+    #define InstallFchInitResetAb       &FchInitResetAb
+    #define InstallFchInitEnvAb         &FchInitEnvAb
+    #define InstallFchInitEnvAbS        &FchInitEnvAbSpecial
+    #define InstallFchInitMidAb         &FchInitMidAb
+    #define InstallFchInitLateAb        &FchInitLateAb
+  #else
+    #define BLOCK_AB_SIZE               0
+    #define InstallFchInitResetAb       &FchTaskDummy
+    #define InstallFchInitEnvAb         &FchTaskDummy
+    #define InstallFchInitEnvAbS        &FchTaskDummy
+    #define InstallFchInitMidAb         &FchTaskDummy
+    #define InstallFchInitLateAb        &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_SPI_SUPPORT
+    #define BLOCK_SPI_SIZE              sizeof (FCH_SPI)
+    #define InstallFchInitResetSpi      &FchInitResetSpi
+    #define InstallFchInitEnvSpi        &FchInitEnvSpi
+    #define InstallFchInitMidSpi        &FchTaskDummy
+    #define InstallFchInitLateSpi       &FchInitLateSpi
+  #else
+    #define BLOCK_SPI_SIZE              0
+    #define InstallFchInitResetSpi      &FchTaskDummy
+    #define InstallFchInitEnvSpi        &FchTaskDummy
+    #define InstallFchInitMidSpi        &FchTaskDummy
+    #define InstallFchInitLateSpi       &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_GEC_SUPPORT
+    #define BLOCK_GEC_SIZE              sizeof (FCH_GEC)
+    #define InstallFchInitResetGec      &FchInitResetGec
+    #define InstallFchInitEnvGec        &FchInitEnvGec
+    #define InstallFchInitMidGec        &FchInitMidGec
+    #define InstallFchInitLateGec       &FchInitLateGec
+  #else
+    #define BLOCK_GEC_SIZE              0
+    #define InstallFchInitResetGec      &FchTaskDummy
+    #define InstallFchInitEnvGec        &FchTaskDummy
+    #define InstallFchInitMidGec        &FchTaskDummy
+    #define InstallFchInitLateGec       &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_SATA_SUPPORT
+    #define BLOCK_SATA_SIZE             sizeof (FCH_SATA)
+    #define InstallFchInitResetSata     &FchInitResetSata
+    #define InstallFchInitEnvSata       &FchInitEnvSata
+    #define InstallFchInitMidSata       &FchInitMidSata
+    #define InstallFchInitLateSata      &FchInitLateSata
+  #else
+    #define BLOCK_SATA_SIZE             0
+    #define InstallFchInitResetSata     &FchTaskDummy
+    #define InstallFchInitEnvSata       &FchTaskDummy
+    #define InstallFchInitMidSata       &FchTaskDummy
+    #define InstallFchInitLateSata      &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_IDE_SUPPORT
+    #define BLOCK_IDE_SIZE              sizeof (FCH_IDE)
+    #define InstallFchInitResetIde      &FchTaskDummy
+    #define InstallFchInitEnvIde        &FchInitEnvIde
+    #define InstallFchInitMidIde        &FchInitMidIde
+    #define InstallFchInitLateIde       &FchInitLateIde
+  #else
+    #define BLOCK_IDE_SIZE              0
+    #define InstallFchInitResetIde      &FchTaskDummy
+    #define InstallFchInitEnvIde        &FchTaskDummy
+    #define InstallFchInitMidIde        &FchTaskDummy
+    #define InstallFchInitLateIde       &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_LPC_SUPPORT
+    #define BLOCK_LPC_SIZE              sizeof (FCH_LPC)
+    #define InstallFchInitResetLpc      &FchInitResetLpc
+    #define InstallFchInitEnvLpc        &FchTaskDummy
+    #define InstallFchInitMidLpc        &FchTaskDummy
+    #define InstallFchInitLateLpc       &FchTaskDummy
+  #else
+    #define BLOCK_LPC_SIZE              0
+    #define InstallFchInitResetLpc      &FchTaskDummy
+    #define InstallFchInitEnvLpc        &FchTaskDummy
+    #define InstallFchInitMidLpc        &FchTaskDummy
+    #define InstallFchInitLateLpc       &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_PCIB_SUPPORT
+    #define BLOCK_PCIB_SIZE             sizeof (FCH_PCIB)
+    #define InstallFchInitResetPcib     &FchInitResetPcib
+    #define InstallFchInitEnvPcib       &FchInitEnvPcib
+    #define InstallFchInitMidPcib       &FchTaskDummy
+    #define InstallFchInitLatePcib      &FchInitLatePcib
+  #else
+    #define BLOCK_PCIB_SIZE             0
+    #define InstallFchInitResetPcib     &FchTaskDummy
+    #define InstallFchInitEnvPcib       &FchTaskDummy
+    #define InstallFchInitMidPcib       &FchTaskDummy
+    #define InstallFchInitLatePcib      &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_PCIE_SUPPORT
+    #define InstallFchInitResetPcie     &FchInitResetPcie
+    #define InstallFchInitEnvPcie       &FchInitEnvPcie
+    #define InstallFchInitMidPcie       &FchTaskDummy
+    #define InstallFchInitLatePcie      &FchInitLatePcie
+  #else
+    #define InstallFchInitResetPcie     &FchTaskDummy
+    #define InstallFchInitEnvPcie       &FchTaskDummy
+    #define InstallFchInitMidPcie       &FchTaskDummy
+    #define InstallFchInitLatePcie      &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_GPP_SUPPORT
+    #define BLOCK_GPP_SIZE              sizeof (FCH_GPP)
+    #define InstallFchInitResetGpp      &FchInitResetGpp
+    #define InstallFchInitEnvGpp        &FchInitEnvGpp
+    #define InstallFchInitMidGpp        &FchTaskDummy
+    #define InstallFchInitLateGpp       &FchInitLateGpp
+    #define InstallHpSmiCallback        &FchGppHotplugSmiCallback
+  #else
+    #define BLOCK_GPP_SIZE              0
+    #define InstallFchInitResetGpp      &FchTaskDummy
+    #define InstallFchInitEnvGpp        &FchTaskDummy
+    #define InstallFchInitMidGpp        &FchTaskDummy
+    #define InstallFchInitLateGpp       &FchTaskDummy
+    #define InstallHpSmiCallback        &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_USB_SUPPORT
+    #define BLOCK_USB_SIZE              sizeof (FCH_USB)
+    #define InstallFchInitResetUsb      &FchInitResetUsb
+    #define InstallFchInitEnvUsb        &FchInitEnvUsb
+    #define InstallFchInitMidUsb        &FchInitMidUsb
+    #define InstallFchInitLateUsb       &FchInitLateUsb
+  #else
+    #define BLOCK_USB_SIZE              0
+    #define InstallFchInitResetUsb      &FchTaskDummy
+    #define InstallFchInitEnvUsb        &FchTaskDummy
+    #define InstallFchInitMidUsb        &FchTaskDummy
+    #define InstallFchInitLateUsb       &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_EHCI_SUPPORT
+    #define InstallFchInitResetUsbEhci  &FchInitResetEhci
+    #define InstallFchInitEnvUsbEhci    &FchInitEnvUsbEhci
+    #define InstallFchInitMidUsbEhci    &FchInitMidUsbEhci
+    #define InstallFchInitLateUsbEhci   &FchInitLateUsbEhci
+  #else
+    #define InstallFchInitResetUsbEhci  &FchTaskDummy
+    #define InstallFchInitEnvUsbEhci    &FchTaskDummy
+    #define InstallFchInitMidUsbEhci    &FchTaskDummy
+    #define InstallFchInitLateUsbEhci   &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_OHCI_SUPPORT
+    #define InstallFchInitResetUsbOhci  &FchInitResetOhci
+    #define InstallFchInitEnvUsbOhci    &FchInitEnvUsbOhci
+    #define InstallFchInitMidUsbOhci    &FchInitMidUsbOhci
+    #define InstallFchInitLateUsbOhci   &FchInitLateUsbOhci
+  #else
+    #define InstallFchInitResetUsbOhci  &FchTaskDummy
+    #define InstallFchInitEnvUsbOhci    &FchTaskDummy
+    #define InstallFchInitMidUsbOhci    &FchTaskDummy
+    #define InstallFchInitLateUsbOhci   &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_XHCI_SUPPORT
+    #define InstallFchInitResetUsbXhci  &FchInitResetXhci
+    #define InstallFchInitEnvUsbXhci    &FchInitEnvUsbXhci
+    #define InstallFchInitMidUsbXhci    &FchInitMidUsbXhci
+    #define InstallFchInitLateUsbXhci   &FchInitLateUsbXhci
+  #else
+    #define InstallFchInitResetUsbXhci  &FchTaskDummy
+    #define InstallFchInitEnvUsbXhci    &FchTaskDummy
+    #define InstallFchInitMidUsbXhci    &FchTaskDummy
+    #define InstallFchInitLateUsbXhci   &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_IMC_SUPPORT
+    #define BLOCK_IMC_SIZE              sizeof (FCH_IMC)
+    #define InstallFchInitResetImc      &FchInitResetImc
+    #define InstallFchInitEnvImc        &FchInitEnvImc
+    #define InstallFchInitMidImc        &FchInitMidImc
+    #define InstallFchInitLateImc       &FchInitLateImc
+  #else
+    #define BLOCK_IMC_SIZE              0
+    #define InstallFchInitResetImc      &FchTaskDummy
+    #define InstallFchInitEnvImc        &FchTaskDummy
+    #define InstallFchInitMidImc        &FchTaskDummy
+    #define InstallFchInitLateImc       &FchTaskDummy
+  #endif
+
+
+  #ifndef FCH_NO_SD_SUPPORT
+    #define BLOCK_SD_SIZE               sizeof (FCH_SD)
+    #define InstallFchInitResetSd       &FchTaskDummy
+    #define InstallFchInitEnvSd         &FchInitEnvSd
+    #define InstallFchInitMidSd         &FchTaskDummy
+    #define InstallFchInitLateSd        &FchTaskDummy
+  #else
+    #define BLOCK_SD_SIZE               0
+    #define InstallFchInitResetSd       &FchTaskDummy
+    #define InstallFchInitEnvSd         &FchTaskDummy
+    #define InstallFchInitMidSd         &FchTaskDummy
+    #define InstallFchInitLateSd        &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_IR_SUPPORT
+    #define BLOCK_IR_SIZE               sizeof (FCH_IR)
+    #define InstallFchInitResetIr       &FchTaskDummy
+    #define InstallFchInitEnvIr         &FchInitEnvIr
+    #define InstallFchInitMidIr         &FchTaskDummy
+    #define InstallFchInitLateIr        &FchTaskDummy
+  #else
+    #define BLOCK_IR_SIZE               0
+    #define InstallFchInitResetIr       &FchTaskDummy
+    #define InstallFchInitEnvIr         &FchTaskDummy
+    #define InstallFchInitMidIr         &FchTaskDummy
+    #define InstallFchInitLateIr        &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_AZALIA_SUPPORT
+    #define BLOCK_AZALIA_SIZE           sizeof (FCH_AZALIA)
+    #define InstallFchInitResetAzalia   &FchTaskDummy
+    #define InstallFchInitEnvAzalia     &FchInitEnvAzalia
+    #define InstallFchInitMidAzalia     &FchInitMidAzalia
+    #define InstallFchInitLateAzalia    &FchInitLateAzalia
+  #else
+    #define BLOCK_AZALIA_SIZE           0
+    #define InstallFchInitResetAzalia   &FchTaskDummy
+    #define InstallFchInitEnvAzalia     &FchTaskDummy
+    #define InstallFchInitMidAzalia     &FchTaskDummy
+    #define InstallFchInitLateAzalia    &FchTaskDummy
+  #endif
+
+  #ifndef FCH_NO_HWM_SUPPORT
+    #define BLOCK_HWM_SIZE              sizeof (FCH_HWM)
+    #define InstallFchInitResetHwm      &FchTaskDummy
+    #define InstallFchInitEnvHwm        &FchInitEnvHwm
+    #define InstallFchInitMidHwm        &FchInitMidHwm
+    #define InstallFchInitLateHwm       &FchInitLateHwm
+  #else
+    #define InstallFchInitResetHwm      &FchTaskDummy
+    #define InstallFchInitEnvHwm        &FchTaskDummy
+    #define InstallFchInitMidHwm        &FchTaskDummy
+    #define InstallFchInitLateHwm       &FchTaskDummy
+  #endif
+
+
+  #define BLOCK_SMBUS_SIZE      sizeof (FCH_SMBUS)
+  #define BLOCK_HPET_SIZE       sizeof (FCH_HPET)
+  #define BLOCK_GCPU_SIZE       sizeof (FCH_GCPU)
+  #define BLOCK_SDB_SIZE        sizeof (FCH_SERIALDB)
+  #define BLOCK_MISC_SIZE       sizeof (FCH_MISC)
+
+
+  // Optionally declare OEM hooks after each phase
+  #ifndef FCH_INIT_RESET_HOOK
+    #define InstallFchInitResetHook     FchTaskDummy
+  #else
+    #define InstallFchInitResetHook     OemFchInitResetHook
+  #endif
+
+
+  //
+  // Define FCH build time options and configurations
+  //
+  #ifdef BLDCFG_SMBUS0_BASE_ADDRESS
+    #define CFG_SMBUS0_BASE_ADDRESS           BLDCFG_SMBUS0_BASE_ADDRESS
+  #else
+    #define CFG_SMBUS0_BASE_ADDRESS           DFLT_SMBUS0_BASE_ADDRESS
+  #endif
+
+  #ifdef BLDCFG_SMBUS1_BASE_ADDRESS
+    #define CFG_SMBUS1_BASE_ADDRESS           BLDCFG_SMBUS1_BASE_ADDRESS
+  #else
+    #define CFG_SMBUS1_BASE_ADDRESS           DFLT_SMBUS1_BASE_ADDRESS
+  #endif
+
+  #ifdef BLDCFG_SIO_PME_BASE_ADDRESS
+    #define CFG_SIO_PME_BASE_ADDRESS          BLDCFG_SIO_PME_BASE_ADDRESS
+  #else
+    #define CFG_SIO_PME_BASE_ADDRESS          DFLT_SIO_PME_BASE_ADDRESS
+  #endif
+
+  #ifdef BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS
+    #define CFG_ACPI_PM1_EVT_BLOCK_ADDRESS    BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS
+  #else
+    #define CFG_ACPI_PM1_EVT_BLOCK_ADDRESS    DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS
+  #endif
+  #ifdef BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS
+    #define CFG_ACPI_PM1_CNT_BLOCK_ADDRESS    BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS
+  #else
+    #define CFG_ACPI_PM1_CNT_BLOCK_ADDRESS    DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS
+  #endif
+  #ifdef BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS
+    #define CFG_ACPI_PM_TMR_BLOCK_ADDRESS     BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS
+  #else
+    #define CFG_ACPI_PM_TMR_BLOCK_ADDRESS     DFLT_ACPI_PM_TMR_BLOCK_ADDRESS
+  #endif
+  #ifdef BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS
+    #define CFG_ACPI_CPU_CNT_BLOCK_ADDRESS    BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS
+  #else
+    #define CFG_ACPI_CPU_CNT_BLOCK_ADDRESS    DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS
+  #endif
+  #ifdef BLDCFG_ACPI_GPE0_BLOCK_ADDRESS
+    #define CFG_ACPI_GPE0_BLOCK_ADDRESS       BLDCFG_ACPI_GPE0_BLOCK_ADDRESS
+  #else
+    #define CFG_ACPI_GPE0_BLOCK_ADDRESS       DFLT_ACPI_GPE0_BLOCK_ADDRESS
+  #endif
+
+
+  #ifdef BLDCFG_WATCHDOG_TIMER_BASE
+    #define CFG_WATCHDOG_TIMER_BASE           BLDCFG_WATCHDOG_TIMER_BASE
+  #else
+    #define CFG_WATCHDOG_TIMER_BASE           DFLT_WATCHDOG_TIMER_BASE_ADDRESS
+  #endif
+
+  #ifdef BLDCFG_ACPI_PMA_BLK_ADDRESS
+    #define CFG_ACPI_PMA_CNTBLK_ADDRESS       BLDCFG_ACPI_PMA_BLK_ADDRESS
+  #else
+    #define CFG_ACPI_PMA_CNTBLK_ADDRESS       DFLT_ACPI_PMA_CNT_BLK_ADDRESS
+  #endif
+
+  #ifdef BLDCFG_SMI_CMD_PORT_ADDRESS
+    #define CFG_SMI_CMD_PORT_ADDRESS          BLDCFG_SMI_CMD_PORT_ADDRESS
+  #else
+    #define CFG_SMI_CMD_PORT_ADDRESS          DFLT_SMI_CMD_PORT
+  #endif
+
+  #ifdef BLDCFG_ROM_BASE_ADDRESS
+    #define CFG_SPI_ROM_BASE_ADDRESS          BLDCFG_ROM_BASE_ADDRESS
+  #else
+    #define CFG_SPI_ROM_BASE_ADDRESS          DFLT_SPI_BASE_ADDRESS
+  #endif
+
+  #ifdef BLDCFG_GEC_SHADOW_ROM_BASE
+    #define CFG_GEC_SHADOW_ROM_BASE           BLDCFG_GEC_SHADOW_ROM_BASE
+  #else
+    #define CFG_GEC_SHADOW_ROM_BASE           DFLT_GEC_BASE_ADDRESS
+  #endif
+
+  #ifdef BLDCFG_HPET_BASE_ADDRESS
+    #define CFG_HPET_BASE_ADDRESS           BLDCFG_HPET_BASE_ADDRESS
+  #else
+    #define CFG_HPET_BASE_ADDRESS           DFLT_HPET_BASE_ADDRESS
+  #endif
+
+  #ifdef BLDCFG_AZALIA_SSID
+    #define CFG_AZALIA_SSID                 BLDCFG_AZALIA_SSID
+  #else
+    #define CFG_AZALIA_SSID                 DFLT_AZALIA_SSID
+  #endif
+
+  #ifdef BLDCFG_SMBUS_SSID
+    #define CFG_SMBUS_SSID                  BLDCFG_SMBUS_SSID
+  #else
+    #define CFG_SMBUS_SSID                  DFLT_SMBUS_SSID
+  #endif
+
+  #ifdef BLDCFG_IDE_SSID
+    #define CFG_IDE_SSID                    BLDCFG_IDE_SSID
+  #else
+    #define CFG_IDE_SSID                    DFLT_IDE_SSID
+  #endif
+
+  #ifdef BLDCFG_SATA_AHCI_SSID
+    #define CFG_SATA_AHCI_SSID              BLDCFG_SATA_AHCI_SSID
+  #else
+    #define CFG_SATA_AHCI_SSID              DFLT_SATA_AHCI_SSID
+  #endif
+
+  #ifdef BLDCFG_SATA_IDE_SSID
+    #define CFG_SATA_IDE_SSID               BLDCFG_SATA_IDE_SSID
+  #else
+    #define CFG_SATA_IDE_SSID               DFLT_SATA_IDE_SSID
+  #endif
+
+  #ifdef BLDCFG_SATA_RAID5_SSID
+    #define CFG_SATA_RAID5_SSID             BLDCFG_SATA_RAID5_SSID
+  #else
+    #define CFG_SATA_RAID5_SSID             DFLT_SATA_RAID5_SSID
+  #endif
+
+  #ifdef BLDCFG_SATA_RAID_SSID
+    #define CFG_SATA_RAID_SSID              BLDCFG_SATA_RAID_SSID
+  #else
+    #define CFG_SATA_RAID_SSID              DFLT_SATA_RAID_SSID
+  #endif
+
+  #ifdef BLDCFG_EHCI_SSID
+    #define CFG_EHCI_SSID                   BLDCFG_EHCI_SSID
+  #else
+    #define CFG_EHCI_SSID                   DFLT_EHCI_SSID
+  #endif
+
+  #ifdef BLDCFG_OHCI_SSID
+    #define CFG_OHCI_SSID                   BLDCFG_OHCI_SSID
+  #else
+    #define CFG_OHCI_SSID                   DFLT_OHCI_SSID
+  #endif
+
+  #ifdef BLDCFG_LPC_SSID
+    #define CFG_LPC_SSID                    BLDCFG_LPC_SSID
+  #else
+    #define CFG_LPC_SSID                    DFLT_LPC_SSID
+  #endif
+
+  #ifdef BLDCFG_SD_SSID
+    #define CFG_SD_SSID                     BLDCFG_SD_SSID
+  #else
+    #define CFG_SD_SSID                     DFLT_SD_SSID
+  #endif
+
+  #ifdef BLDCFG_XHCI_SSID
+    #define CFG_XHCI_SSID                   BLDCFG_XHCI_SSID
+  #else
+    #define CFG_XHCI_SSID                   DFLT_XHCI_SSID
+  #endif
+
+  #ifdef BLDCFG_FCH_PORT80_BEHIND_PCIB
+    #define CFG_FCH_PORT80_BEHIND_PCIB      BLDCFG_FCH_PORT80_BEHIND_PCIB
+  #else
+    #define CFG_FCH_PORT80_BEHIND_PCIB      DFLT_FCH_PORT80_BEHIND_PCIB
+  #endif
+
+  #ifdef BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP
+    #define CFG_FCH_ENABLE_ACPI_SLEEP_TRAP  BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP
+  #else
+    #define CFG_FCH_ENABLE_ACPI_SLEEP_TRAP  DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP
+  #endif
+
+  #ifdef BLDCFG_FCH_GPP_LINK_CONFIG
+    #define CFG_FCH_GPP_LINK_CONFIG         BLDCFG_FCH_GPP_LINK_CONFIG
+  #else
+    #define CFG_FCH_GPP_LINK_CONFIG         DFLT_FCH_GPP_LINK_CONFIG
+  #endif
+
+  #ifdef BLDCFG_FCH_GPP_PORT0_PRESENT
+    #define CFG_FCH_GPP_PORT0_PRESENT       BLDCFG_FCH_GPP_PORT0_PRESENT
+  #else
+    #define CFG_FCH_GPP_PORT0_PRESENT       DFLT_FCH_GPP_PORT0_PRESENT
+  #endif
+
+  #ifdef BLDCFG_FCH_GPP_PORT1_PRESENT
+    #define CFG_FCH_GPP_PORT1_PRESENT       BLDCFG_FCH_GPP_PORT1_PRESENT
+  #else
+    #define CFG_FCH_GPP_PORT1_PRESENT       DFLT_FCH_GPP_PORT1_PRESENT
+  #endif
+
+  #ifdef BLDCFG_FCH_GPP_PORT2_PRESENT
+    #define CFG_FCH_GPP_PORT2_PRESENT       BLDCFG_FCH_GPP_PORT2_PRESENT
+  #else
+    #define CFG_FCH_GPP_PORT2_PRESENT       DFLT_FCH_GPP_PORT2_PRESENT
+  #endif
+
+  #ifdef BLDCFG_FCH_GPP_PORT3_PRESENT
+    #define CFG_FCH_GPP_PORT3_PRESENT       BLDCFG_FCH_GPP_PORT3_PRESENT
+  #else
+    #define CFG_FCH_GPP_PORT3_PRESENT       DFLT_FCH_GPP_PORT3_PRESENT
+  #endif
+
+  #ifdef BLDCFG_FCH_GPP_PORT0_HOTPLUG
+    #define CFG_FCH_GPP_PORT0_HOTPLUG       BLDCFG_FCH_GPP_PORT0_HOTPLUG
+  #else
+    #define CFG_FCH_GPP_PORT0_HOTPLUG       DFLT_FCH_GPP_PORT0_HOTPLUG
+  #endif
+
+  #ifdef BLDCFG_FCH_GPP_PORT1_HOTPLUG
+    #define CFG_FCH_GPP_PORT1_HOTPLUG       BLDCFG_FCH_GPP_PORT1_HOTPLUG
+  #else
+    #define CFG_FCH_GPP_PORT1_HOTPLUG       DFLT_FCH_GPP_PORT1_HOTPLUG
+  #endif
+
+  #ifdef BLDCFG_FCH_GPP_PORT2_HOTPLUG
+    #define CFG_FCH_GPP_PORT2_HOTPLUG       BLDCFG_FCH_GPP_PORT2_HOTPLUG
+  #else
+    #define CFG_FCH_GPP_PORT2_HOTPLUG       DFLT_FCH_GPP_PORT2_HOTPLUG
+  #endif
+
+  #ifdef BLDCFG_FCH_GPP_PORT3_HOTPLUG
+    #define CFG_FCH_GPP_PORT3_HOTPLUG       BLDCFG_FCH_GPP_PORT3_HOTPLUG
+  #else
+    #define CFG_FCH_GPP_PORT3_HOTPLUG       DFLT_FCH_GPP_PORT3_HOTPLUG
+  #endif
+
+  #ifdef BLDCFG_FCH_ESATA_PORT_BITMAP
+    #define CFG_FCH_ESATA_PORT_BITMAP       BLDCFG_FCH_ESATA_PORT_BITMAP
+  #else
+    #define CFG_FCH_ESATA_PORT_BITMAP       0
+  #endif
+
+  #ifdef BLDCFG_FCH_IR_PIN_CONTROL
+    #define CFG_FCH_IR_PIN_CONTROL          BLDCFG_FCH_IR_PIN_CONTROL
+  #else
+    #define CFG_FCH_IR_PIN_CONTROL          (BIT5 | BIT1 | BIT0)
+  #endif
+
+  #ifdef BLDCFG_FCH_SD_CLOCK_CONTROL
+    #define CFG_FCH_SD_CLOCK_CONTROL        BLDCFG_FCH_SD_CLOCK_CONTROL
+  #else
+    #define CFG_FCH_SD_CLOCK_CONTROL        Sd50MhzTraceCableLengthWithinSixInches
+  #endif
+
+  #ifdef BLDCFG_FCH_SCI_MAP_LIST
+    #define CFG_FCH_SCI_MAP_LIST            BLDCFG_FCH_SCI_MAP_LIST
+  #else
+    #define CFG_FCH_SCI_MAP_LIST            NULL
+  #endif
+
+  #ifdef BLDCFG_FCH_SATA_PHY_LIST
+    #define CFG_FCH_SATA_PHY_LIST           BLDCFG_FCH_SATA_PHY_LIST
+  #else
+    #define CFG_FCH_SATA_PHY_LIST           NULL
+  #endif
+
+  #ifdef BLDCFG_FCH_GPIO_CONTROL_LIST
+    #define CFG_FCH_GPIO_CONTROL_LIST       BLDCFG_FCH_GPIO_CONTROL_LIST
+  #else
+    #define CFG_FCH_GPIO_CONTROL_LIST       NULL
+  #endif
+
+
+  #ifdef AGESA_ENTRY_INIT_RESET
+    #if AGESA_ENTRY_INIT_RESET == TRUE
+      //
+      // Define task list for InitReset phase
+      //
+      FCH_TASK_ENTRY ROMDATA  *FchInitResetTaskTable[] = {
+        InstallFchInitResetHwAcpiP,
+        InstallFchInitResetAb,
+        InstallFchInitResetSpi,
+        InstallFchInitResetGec,
+        InstallFchInitResetHwAcpi,
+        InstallFchInitResetSata,
+        InstallFchInitResetLpc,
+        InstallFchInitResetPcib,
+        InstallFchInitResetPcie,
+        InstallFchInitResetGpp,
+        InstallFchInitResetUsb,
+        InstallFchInitResetUsbEhci,
+        InstallFchInitResetUsbOhci,
+        InstallFchInitResetUsbXhci,
+        InstallFchInitResetImc,
+        NULL
+      };
+    #endif
+  #endif
+
+  #ifdef AGESA_ENTRY_INIT_ENV
+    #if AGESA_ENTRY_INIT_ENV == TRUE
+      //
+      // Define task list for InitEnv phase
+      //
+      FCH_TASK_ENTRY ROMDATA  *FchInitEnvTaskTable[] = {
+        InstallFchInitEnvHwAcpiP,
+        InstallFchInitEnvPcib,
+        InstallFchInitEnvPcie,
+        InstallFchInitEnvIr,
+        InstallFchInitEnvHwAcpi,
+        InstallFchInitEnvSpi,
+        InstallFchInitEnvSd,
+        InstallFchInitEnvImc,
+        InstallFchInitEnvUsb,
+        InstallFchInitEnvUsbEhci,
+        InstallFchInitEnvUsbOhci,
+        InstallFchInitEnvUsbXhci,
+        InstallFchInitEnvSata,
+        InstallFchInitEnvIde,
+        InstallFchInitEnvGec,
+        InstallFchInitEnvAzalia,
+        InstallFchInitEnvAb,
+        InstallFchInitEnvGpp,
+        InstallFchInitEnvAbS,
+        InstallFchInitEnvHwm,
+        NULL
+      };
+    #endif
+  #endif
+
+
+  #ifdef AGESA_ENTRY_INIT_MID
+    #if AGESA_ENTRY_INIT_MID == TRUE
+      //
+      // Define task list for InitMid phase
+      //
+      FCH_TASK_ENTRY ROMDATA  *FchInitMidTaskTable[] = {
+        InstallFchInitMidImc,
+        InstallFchInitMidUsb,
+        InstallFchInitMidUsbEhci,
+        InstallFchInitMidUsbOhci,
+        InstallFchInitMidUsbXhci,
+        InstallFchInitMidSata,
+        InstallFchInitMidIde,
+        InstallFchInitMidGec,
+        InstallFchInitMidAzalia,
+        InstallFchInitMidHwm,
+        NULL
+      };
+    #endif
+  #endif
+
+  #ifdef AGESA_ENTRY_INIT_LATE
+    #if AGESA_ENTRY_INIT_LATE == TRUE
+      //
+      // Define task list for InitLate phase
+      //
+      FCH_TASK_ENTRY ROMDATA  *FchInitLateTaskTable[] = {
+        InstallFchInitLatePcie,
+        InstallFchInitLatePcib,
+        InstallFchInitLateSpi,
+        InstallFchInitLateUsb,
+        InstallFchInitLateUsbEhci,
+        InstallFchInitLateUsbOhci,
+        InstallFchInitLateUsbXhci,
+        InstallFchInitLateSata,
+        InstallFchInitLateIde,
+        InstallFchInitLateGec,
+        InstallFchInitLateAzalia,
+        InstallFchInitLateImc,
+        InstallFchInitLateHwm,
+        InstallFchInitLateGpp,
+        InstallFchInitLateHwAcpi,
+        NULL
+      };
+    #endif
+  #endif
+
+
+  #ifdef AGESA_ENTRY_INIT_ENV
+    #if AGESA_ENTRY_INIT_ENV == TRUE
+      //
+      // Define task list for S3 resume before PCI phase
+      //
+      FCH_TASK_ENTRY ROMDATA  *FchInitS3EarlyTaskTable[] = {
+        InstallFchInitEnvPcie,
+        InstallFchInitEnvPcib,
+        InstallFchInitEnvIr,
+        InstallFchInitEnvHwAcpi,
+        InstallFchInitEnvSpi,
+        InstallFchInitEnvSd,
+        InstallFchInitEnvUsb,
+        InstallFchInitEnvSata,
+        InstallFchInitEnvIde,
+        InstallFchInitEnvGec,
+        InstallFchInitEnvAzalia,
+        InstallFchInitEnvAb,
+        InstallFchInitEnvGpp,
+        InstallFchInitEnvAbS,
+        NULL
+      };
+    #endif
+  #endif
+
+  #ifdef AGESA_ENTRY_INIT_LATE
+    #if AGESA_ENTRY_INIT_LATE == TRUE
+      //
+      // Define task list for S3 resume after PCI phase
+      //
+      FCH_TASK_ENTRY ROMDATA  *FchInitS3LateTaskTable[] = {
+        InstallFchInitLatePcie,
+        InstallFchInitLatePcib,
+        InstallFchInitLateSpi,
+        InstallFchInitLateUsb,
+        InstallFchInitLateUsbEhci,
+        InstallFchInitLateUsbOhci,
+        InstallFchInitLateUsbXhci,
+        InstallFchInitMidSata,
+        InstallFchInitMidIde,
+        InstallFchInitMidGec,
+        InstallFchInitMidAzalia,
+        InstallFchInitLateSata,
+        InstallFchInitLateIde,
+        InstallFchInitLateHwAcpi,
+        InstallFchInitEnvHwm,
+        InstallFchInitLateHwm,
+        NULL
+      };
+    #endif
+  #endif
+  FCH_TASK_ENTRY   *FchGppHotplugSmiCallbackPtr = InstallHpSmiCallback;
+
+
+#else   // FCH_SUPPORT == FALSE
+  /* FCH Interface entries */
+  extern  FCH_INIT     CommonFchInitStub;
+
+  #define FP_FCH_INIT_RESET              &CommonFchInitStub
+  #define FP_FCH_INIT_RESET_CONSTRUCT    &CommonFchInitStub
+  #define FP_FCH_INIT_ENV                &CommonFchInitStub
+  #define FP_FCH_INIT_ENV_CONSTRUCT      &CommonFchInitStub
+  #define FP_FCH_INIT_MID                &CommonFchInitStub
+  #define FP_FCH_INIT_MID_CONSTRUCT      &CommonFchInitStub
+  #define FP_FCH_INIT_LATE               &CommonFchInitStub
+  #define FP_FCH_INIT_LATE_CONSTRUCT     &CommonFchInitStub
+
+  #define CFG_SMBUS0_BASE_ADDRESS            0
+  #define CFG_SMBUS1_BASE_ADDRESS            0
+  #define CFG_SIO_PME_BASE_ADDRESS           0
+  #define CFG_ACPI_PM1_EVT_BLOCK_ADDRESS     0
+  #define CFG_ACPI_PM1_CNT_BLOCK_ADDRESS     0
+  #define CFG_ACPI_PM_TMR_BLOCK_ADDRESS      0
+  #define CFG_ACPI_CPU_CNT_BLOCK_ADDRESS     0
+  #define CFG_ACPI_GPE0_BLOCK_ADDRESS        0
+  #define CFG_SPI_ROM_BASE_ADDRESS           0
+  #define CFG_WATCHDOG_TIMER_BASE            0
+  #define CFG_HPET_BASE_ADDRESS              0
+  #define CFG_SMI_CMD_PORT_ADDRESS           0
+  #define CFG_ACPI_PMA_CNTBLK_ADDRESS        0
+  #define CFG_GEC_SHADOW_ROM_BASE            0
+  #define CFG_AZALIA_SSID                    0
+  #define CFG_SMBUS_SSID                     0
+  #define CFG_IDE_SSID                       0
+  #define CFG_SATA_AHCI_SSID                 0
+  #define CFG_SATA_IDE_SSID                  0
+  #define CFG_SATA_RAID5_SSID                0
+  #define CFG_SATA_RAID_SSID                 0
+  #define CFG_EHCI_SSID                      0
+  #define CFG_OHCI_SSID                      0
+  #define CFG_LPC_SSID                       0
+  #define CFG_SD_SSID                        0
+  #define CFG_XHCI_SSID                      0
+  #define CFG_FCH_PORT80_BEHIND_PCIB         0
+  #define CFG_FCH_ENABLE_ACPI_SLEEP_TRAP     0
+  #define CFG_FCH_GPP_LINK_CONFIG            0
+  #define CFG_FCH_GPP_PORT0_PRESENT          0
+  #define CFG_FCH_GPP_PORT1_PRESENT          0
+  #define CFG_FCH_GPP_PORT2_PRESENT          0
+  #define CFG_FCH_GPP_PORT3_PRESENT          0
+  #define CFG_FCH_GPP_PORT0_HOTPLUG          0
+  #define CFG_FCH_GPP_PORT1_HOTPLUG          0
+  #define CFG_FCH_GPP_PORT2_HOTPLUG          0
+  #define CFG_FCH_GPP_PORT3_HOTPLUG          0
+
+  #define CFG_FCH_ESATA_PORT_BITMAP          0
+  #define CFG_FCH_IR_PIN_CONTROL             0
+  #define CFG_FCH_SD_CLOCK_CONTROL           0
+  #define CFG_FCH_SCI_MAP_LIST               0
+  #define CFG_FCH_SATA_PHY_LIST              0
+  #define CFG_FCH_GPIO_CONTROL_LIST          0
+
+#endif
+
+
+CONST BLDOPT_FCH_FUNCTION ROMDATA BldoptFchFunction = {
+  FP_FCH_INIT_RESET,
+  FP_FCH_INIT_RESET_CONSTRUCT,
+  FP_FCH_INIT_ENV,
+  FP_FCH_INIT_ENV_CONSTRUCT,
+  FP_FCH_INIT_MID,
+  FP_FCH_INIT_MID_CONSTRUCT,
+  FP_FCH_INIT_LATE,
+  FP_FCH_INIT_LATE_CONSTRUCT,
+};
+
+#endif  // _OPTION_FCH_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionGfxRecovery.h b/src/vendorcode/amd/agesa/f15/Include/OptionGfxRecovery.h
new file mode 100644
index 0000000000..a7b117354e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionGfxRecovery.h
@@ -0,0 +1,82 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD GFX Recovery option API.
+ *
+ * Contains structures and values used to control the GfxRecovery option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_GFX_RECOVERY_H_
+#define _OPTION_GFX_RECOVERY_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef AGESA_STATUS OPTION_GFX_RECOVERY_FEATURE (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#define GFX_RECOVERY_STRUCT_VERSION  0x01
+
+/// The Option Configuration of GFX Recovery
+typedef struct  {
+  UINT16              OptGfxRecoveryVersion;       ///< The version number of GFX Recovery
+  OPTION_GFX_RECOVERY_FEATURE  *GfxRecoveryFeature;        ///< The Option Feature of GFX Recovery
+} OPTION_GFX_RECOVERY_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif  // _OPTION_GFX_RECOVERY_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionGfxRecoveryInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionGfxRecoveryInstall.h
new file mode 100644
index 0000000000..1f29c8f672
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionGfxRecoveryInstall.h
@@ -0,0 +1,54 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: GfxRecovery
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_GFX_RECOVERY_INSTALL_H_
+#define _OPTION_GFX_RECOVERY_INSTALL_H_
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+
+
+#endif  // _OPTION_GFX_RECOVERY_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionGnb.h b/src/vendorcode/amd/agesa/f15/Include/OptionGnb.h
new file mode 100644
index 0000000000..4b586455da
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionGnb.h
@@ -0,0 +1,109 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD ALIB option API.
+ *
+ * Contains structures and values used to control the ALIB option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 53099 $   @e \$Date: 2011-05-16 01:08:27 -0600 (Mon, 16 May 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_GNB_H_
+#define _OPTION_GNB_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+typedef AGESA_STATUS OPTION_GNB_FEATURE (
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+/// The Option Configuration
+typedef struct {
+  UINT64                Type;                   ///< Type
+  OPTION_GNB_FEATURE    *GnbFeature;            ///< The GNB Feature
+} OPTION_GNB_CONFIGURATION;
+
+/// The Build time options configuration
+typedef struct {
+  BOOLEAN               IgfxModeAsPcieEp;                   ///< Itegrated Gfx mode Pcie EP or Legacy
+  BOOLEAN               LclkDeepSleepEn;                    ///< Default for LCLK deep sleep
+  BOOLEAN               LclkDpmEn;                          ///< Default for LCLK DPM
+  BOOLEAN               GmcPowerGateStutterOnly;            ///< Force GMC power gate to stutter only
+  BOOLEAN               SmuSclkClockGatingEnable;           ///< Control SMU SCLK gating
+  BOOLEAN               PcieAspmBlackListEnable;            ///< Control Pcie Aspm Black List
+  BOOLEAN               IvrsRelativeAddrNamesSupport;       ///< Support for relative address names
+  BOOLEAN               GnbLoadRealFuseTable;               ///< Support for fuse table loading
+  UINT32                CfgGnbLinkReceiverDetectionPooling; ///< Receiver pooling detection time in us.
+  UINT32                CfgGnbLinkL0Pooling;                ///< Pooling for link to get to L0 in us
+  UINT32                CfgGnbLinkGpioResetAssertionTime;   ///< Gpio reset assertion time in us
+  UINT32                CfgGnbLinkResetToTrainingTime;      ///< Time duration between deassert GPIO reset and release training in us
+  UINT8                 CfgGnbTrainingAlgorithm;            ///< distribution of training across interface calls
+  BOOLEAN               CfgForceCableSafeOff;               ///< Force cable safe off
+  BOOLEAN               CfgOrbClockGatingEnable;            ///< Control ORB clock gating
+  UINT8                 CfgPciePowerGatingFlags;            ///< Pcie Power gating flags
+  BOOLEAN               CfgIocLclkClockGatingEnable;        ///< Control IOC LCLK clock gating
+  BOOLEAN               CfgIocSclkClockGatingEnable;        ///< Control IOC SCLK clock gating
+  BOOLEAN               CfgIommuL1ClockGatingEnable;        ///< Control IOMMU L1 clock gating
+  BOOLEAN               CfgIommuL2ClockGatingEnable;        ///< Control IOMMU L2 clock gating
+  BOOLEAN               CfgAltVddNb;                        ///< AltVDDNB support
+  BOOLEAN               CfgBapmSupport;                     ///< BAPM support
+  BOOLEAN               CfgUnusedSimdPowerGatingEnable;     ///< Control unused SIMD power gate
+  BOOLEAN               CfgUnusedRbPowerGatingEnable;       ///< Control unused SIMD power gate
+} GNB_BUILD_OPTIONS;
+
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _OPTION_GNB_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionGnbInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionGnbInstall.h
new file mode 100644
index 0000000000..7733859aed
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionGnbInstall.h
@@ -0,0 +1,591 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: GNB
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 53099 $   @e \$Date: 2011-05-16 01:08:27 -0600 (Mon, 16 May 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_GNB_INSTALL_H_
+#define _OPTION_GNB_INSTALL_H_
+
+#include "S3SaveState.h"
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+
+//---------------------------------------------------------------------------------------------------
+// Family installation
+//---------------------------------------------------------------------------------------------------
+
+
+#define GNB_TYPE_LN   FALSE
+#define GNB_TYPE_ON   FALSE
+
+#if (OPTION_FAMILY14H_ON == TRUE)
+  #undef  GNB_TYPE_ON
+  #define GNB_TYPE_ON  TRUE
+#endif
+
+#if (OPTION_FAMILY12H_LN == TRUE)
+  #undef  GNB_TYPE_LN
+  #define GNB_TYPE_LN  TRUE
+#endif
+
+
+#if (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+//---------------------------------------------------------------------------------------------------
+// Service installation
+//---------------------------------------------------------------------------------------------------
+
+  #include "Gnb.h"
+  #include "GnbPcie.h"
+
+  #define SERVICES_POINTER  NULL
+  GNB_SERVICE   *ServiceTable = SERVICES_POINTER;
+
+//---------------------------------------------------------------------------------------------------
+// BUILD options
+//---------------------------------------------------------------------------------------------------
+
+  #ifndef CFG_IGFX_AS_PCIE_EP
+    #define CFG_IGFX_AS_PCIE_EP                           TRUE
+  #endif
+
+  #ifndef CFG_LCLK_DEEP_SLEEP_EN
+    #define  CFG_LCLK_DEEP_SLEEP_EN                       TRUE
+  #endif
+
+  #ifndef CFG_LCLK_DPM_EN
+    #define CFG_LCLK_DPM_EN                               TRUE
+  #endif
+
+  #ifndef CFG_GMC_POWER_GATE_STUTTER_ONLY
+    #define CFG_GMC_POWER_GATE_STUTTER_ONLY               FALSE
+  #endif
+
+  #ifndef CFG_SMU_SCLK_CLOCK_GATING_ENABLE
+    #if (GNB_TYPE_ON == TRUE)
+      #define  CFG_SMU_SCLK_CLOCK_GATING_ENABLE           TRUE
+    #else
+      #define CFG_SMU_SCLK_CLOCK_GATING_ENABLE            FALSE
+    #endif
+  #endif
+
+  #ifndef CFG_PCIE_ASPM_BLACK_LIST_ENABLE
+    #define CFG_PCIE_ASPM_BLACK_LIST_ENABLE               TRUE
+  #endif
+
+  #ifndef CFG_GNB_IVRS_RELATIVE_ADDR_NAMES_SUPPORT
+    #define CFG_GNB_IVRS_RELATIVE_ADDR_NAMES_SUPPORT      FALSE
+  #endif
+
+  #ifndef CFG_GNB_LOAD_REAL_FUSE
+    #define  CFG_GNB_LOAD_REAL_FUSE                       TRUE
+  #endif
+
+  #ifndef CFG_GNB_PCIE_LINK_RECEIVER_DETECTION_POOLING
+    #define CFG_GNB_PCIE_LINK_RECEIVER_DETECTION_POOLING  (60 * 1000)
+  #endif
+
+  #ifndef CFG_GNB_PCIE_LINK_L0_POOLING
+    #define CFG_GNB_PCIE_LINK_L0_POOLING                  (60 * 1000)
+  #endif
+
+  #ifndef CFG_GNB_PCIE_LINK_GPIO_RESET_ASSERT_TIME
+    #define CFG_GNB_PCIE_LINK_GPIO_RESET_ASSERT_TIME      (2 * 1000)
+  #endif
+
+  #ifndef CFG_GNB_PCIE_LINK_RESET_TO_TRAINING_TIME
+    #define CFG_GNB_PCIE_LINK_RESET_TO_TRAINING_TIME      (2 * 1000)
+  #endif
+
+  #ifdef BLDCFG_PCIE_TRAINING_ALGORITHM
+    #define CFG_GNB_PCIE_TRAINING_ALGORITHM               BLDCFG_PCIE_TRAINING_ALGORITHM
+  #else
+    #define CFG_GNB_PCIE_TRAINING_ALGORITHM               PcieTrainingStandard
+  #endif
+
+  #ifndef CFG_GNB_FORCE_CABLESAFE_OFF
+    #define CFG_GNB_FORCE_CABLESAFE_OFF                   FALSE
+  #endif
+
+  #ifndef CFG_ORB_CLOCK_GATING_ENABLE
+      #define CFG_ORB_CLOCK_GATING_ENABLE                 TRUE
+    #endif
+
+  #ifndef CFG_GNB_PCIE_POWERGATING_FLAGS
+    #define CFG_GNB_PCIE_POWERGATING_FLAGS                0x0
+  #endif
+
+  #ifndef CFG_IOC_LCLK_CLOCK_GATING_ENABLE
+      #define CFG_IOC_LCLK_CLOCK_GATING_ENABLE            FALSE
+    #endif
+
+  #ifndef CFG_IOC_SCLK_CLOCK_GATING_ENABLE
+      #define CFG_IOC_SCLK_CLOCK_GATING_ENABLE            FALSE
+    #endif
+
+  #ifndef CFG_IOMMU_L1_CLOCK_GATING_ENABLE
+      #define CFG_IOMMU_L1_CLOCK_GATING_ENABLE            FALSE
+    #endif
+
+  #ifndef CFG_IOMMU_L2_CLOCK_GATING_ENABLE
+      #define CFG_IOMMU_L2_CLOCK_GATING_ENABLE            FALSE
+    #endif
+
+  #ifndef CFG_GNB_ALTVDDNB_SUPPORT
+    #define CFG_GNB_ALTVDDNB_SUPPORT                      TRUE
+  #endif
+
+  #ifndef CFG_GNB_BAPM_SUPPORT
+    #define CFG_GNB_BAPM_SUPPORT                          TRUE
+  #endif
+
+  #ifndef CFG_UNUSED_SIMD_POWERGATING_ENABLE
+    #define CFG_UNUSED_SIMD_POWERGATING_ENABLE            TRUE
+  #endif
+
+  #ifndef CFG_UNUSED_RB_POWERGATING_ENABLE
+    #define CFG_UNUSED_RB_POWERGATING_ENABLE              FALSE
+  #endif
+
+  GNB_BUILD_OPTIONS ROMDATA GnbBuildOptions = {
+    CFG_IGFX_AS_PCIE_EP,
+    CFG_LCLK_DEEP_SLEEP_EN,
+    CFG_LCLK_DPM_EN,
+    CFG_GMC_POWER_GATE_STUTTER_ONLY,
+    CFG_SMU_SCLK_CLOCK_GATING_ENABLE,
+    CFG_PCIE_ASPM_BLACK_LIST_ENABLE,
+    CFG_GNB_IVRS_RELATIVE_ADDR_NAMES_SUPPORT,
+    CFG_GNB_LOAD_REAL_FUSE,
+    CFG_GNB_PCIE_LINK_RECEIVER_DETECTION_POOLING,
+    CFG_GNB_PCIE_LINK_L0_POOLING,
+    CFG_GNB_PCIE_LINK_GPIO_RESET_ASSERT_TIME,
+    CFG_GNB_PCIE_LINK_RESET_TO_TRAINING_TIME,
+    CFG_GNB_PCIE_TRAINING_ALGORITHM,
+    CFG_GNB_FORCE_CABLESAFE_OFF,
+    CFG_ORB_CLOCK_GATING_ENABLE,
+    CFG_GNB_PCIE_POWERGATING_FLAGS,
+    CFG_IOC_LCLK_CLOCK_GATING_ENABLE,
+    CFG_IOC_SCLK_CLOCK_GATING_ENABLE,
+    CFG_IOMMU_L1_CLOCK_GATING_ENABLE,
+    CFG_IOMMU_L2_CLOCK_GATING_ENABLE,
+    CFG_GNB_ALTVDDNB_SUPPORT,
+    CFG_GNB_BAPM_SUPPORT,
+    CFG_UNUSED_SIMD_POWERGATING_ENABLE,
+    CFG_UNUSED_RB_POWERGATING_ENABLE
+  };
+
+  //---------------------------------------------------------------------------------------------------
+  // Module entries
+  //---------------------------------------------------------------------------------------------------
+
+  #if (AGESA_ENTRY_INIT_EARLY == TRUE)
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_NB_EARLY_INIT
+      #define OPTION_NB_EARLY_INIT TRUE
+    #endif
+    #if (OPTION_NB_EARLY_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  NbInitAtEarly;
+      #define OPTION_NBINITATEARLY_ENTRY                  {AMD_FAMILY_LN | AMD_FAMILY_ON, NbInitAtEarly},
+    #else
+      #define OPTION_NBINITATEARLY_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+  // SMU init
+    #ifndef OPTION_SMU
+      #define OPTION_SMU  TRUE
+    #endif
+    #if (OPTION_SMU == TRUE) && (GNB_TYPE_LN == TRUE)
+      OPTION_GNB_FEATURE                                  F12NbSmuInitFeature;
+      #define OPTION_F12NBSMUINITFEATURE_ENTRY            {AMD_FAMILY_LN, F12NbSmuInitFeature},
+    #else
+      #define OPTION_F12NBSMUINITFEATURE_ENTRY
+    #endif
+    #if (OPTION_SMU == TRUE) && (GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  F14NbSmuInitFeature;
+      #define OPTION_F14NBSMUINITFEATURE_ENTRY            {AMD_FAMILY_ON, F14NbSmuInitFeature},
+    #else
+      #define OPTION_F14NBSMUINITFEATURE_ENTRY
+    #endif
+      #define OPTION_KRNBSMUINITFEATURE_ENTRY
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_PCIE_CONFIG_MAP
+      #define OPTION_PCIE_CONFIG_MAP TRUE
+    #endif
+    #if (OPTION_PCIE_CONFIG_MAP == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                 PcieConfigurationMap;
+      #define OPTION_PCIECONFIGURATIONMAP_ENTRY          {AMD_FAMILY_LN | AMD_FAMILY_ON, PcieConfigurationMap},
+    #else
+      #define OPTION_PCIECONFIGURATIONMAP_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_PCIE_EARLY_INIT
+      #define OPTION_PCIE_EARLY_INIT TRUE
+    #endif
+    #if (OPTION_PCIE_EARLY_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  PcieInitAtEarly;
+      #define OPTION_PCIEINITATEARLY_ENTRY                {AMD_FAMILY_LN | AMD_FAMILY_ON, PcieInitAtEarly},
+    #else
+      #define  OPTION_PCIEINITATEARLY_ENTRY
+    #endif
+
+  //---------------------------------------------------------------------------------------------------
+    OPTION_GNB_CONFIGURATION  GnbEarlyFeatureTable[] = {
+      OPTION_NBINITATEARLY_ENTRY
+      OPTION_F12NBSMUINITFEATURE_ENTRY
+      OPTION_F14NBSMUINITFEATURE_ENTRY
+      OPTION_PCIECONFIGURATIONMAP_ENTRY
+      OPTION_PCIEINITATEARLY_ENTRY
+      {0, NULL}
+    };
+
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_PCIE_CONFIG_INIT
+      #define OPTION_PCIE_CONFIG_INIT TRUE
+    #endif
+    #if (OPTION_PCIE_CONFIG_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  PcieConfigurationInit;
+      #define OPTION_PCIECONFIGURATIONINIT_ENTRY          {AMD_FAMILY_LN | AMD_FAMILY_ON, PcieConfigurationInit},
+    #else
+      #define OPTION_PCIECONFIGURATIONINIT_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_NB_EARLIER_INIT
+      #define OPTION_NB_EARLIER_INIT TRUE
+    #endif
+
+    OPTION_GNB_CONFIGURATION  GnbEarlierFeatureTable[] = {
+      OPTION_PCIECONFIGURATIONINIT_ENTRY
+      {0, NULL}
+    };
+  #endif
+
+  #if (AGESA_ENTRY_INIT_POST == TRUE)
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_GFX_CONFIG_POST_INIT
+      #define OPTION_GFX_CONFIG_POST_INIT TRUE
+    #endif
+    #if (OPTION_GFX_CONFIG_POST_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  GfxConfigPostInterface;
+      #define OPTION_GFXCONFIGPOSTINTERFACE_ENTRY         {AMD_FAMILY_LN | AMD_FAMILY_ON, GfxConfigPostInterface},
+    #else
+      #define  OPTION_GFXCONFIGPOSTINTERFACE_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_GFX_POST_INIT
+      #define OPTION_GFX_POST_INIT TRUE
+    #endif
+    #if (OPTION_GFX_POST_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  GfxInitAtPost;
+      #define OPTION_GFXINITATPOST_ENTRY                  {AMD_FAMILY_LN | AMD_FAMILY_ON, GfxInitAtPost},
+    #else
+      #define  OPTION_GFXINITATPOST_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_NB_POST_INIT
+      #define OPTION_NB_POST_INIT TRUE
+    #endif
+    #if (OPTION_NB_POST_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  NbInitAtPost;
+      #define OPTION_NBINITATPOST_ENTRY                   {AMD_FAMILY_LN | AMD_FAMILY_ON, NbInitAtPost},
+    #else
+      #define OPTION_NBINITATPOST_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_PCIE_POST_EALRY_INIT
+      #define OPTION_PCIE_POST_EALRY_INIT TRUE
+    #endif
+    #if (OPTION_PCIE_POST_EALRY_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  PcieInitAtPostEarly;
+    #define OPTION_PCIEINITATPOSTEARLY_ENTRY              {AMD_FAMILY_LN | AMD_FAMILY_ON, PcieInitAtPostEarly},
+    #else
+      #define OPTION_PCIEINITATPOSTEARLY_ENTRY
+    #endif
+
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_PCIE_POST_INIT
+      #define OPTION_PCIE_POST_INIT TRUE
+    #endif
+    #if (OPTION_PCIE_POST_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  PcieInitAtPost;
+      #define OPTION_PCIEINITATPOST_ENTRY                 {AMD_FAMILY_LN | AMD_FAMILY_ON, PcieInitAtPost},
+    #else
+      #define OPTION_PCIEINITATPOST_ENTRY
+    #endif
+
+  //---------------------------------------------------------------------------------------------------
+    OPTION_GNB_CONFIGURATION  GnbPostFeatureTable[] = {
+      OPTION_PCIEINITATPOSTEARLY_ENTRY
+      OPTION_GFXCONFIGPOSTINTERFACE_ENTRY
+      OPTION_GFXINITATPOST_ENTRY
+      OPTION_GFXPOSTINTERFACETN_ENTRY
+      {0, NULL}
+    };
+
+    OPTION_GNB_CONFIGURATION  GnbPostAfterDramFeatureTable[] = {
+      OPTION_NBINITATPOST_ENTRY
+      OPTION_PCIEINITATPOST_ENTRY
+      OPTION_PCIEPOSTINTERFACETN_ENTRY
+      OPTION_PCIEPOSTINTERFACEKM_ENTRY
+      {0, NULL}
+    };
+  #endif
+
+  #if (AGESA_ENTRY_INIT_ENV == TRUE)
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_FUSE_TABLE_INIT
+      #define OPTION_FUSE_TABLE_INIT TRUE
+    #endif
+    #if (OPTION_FUSE_TABLE_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  NbFuseTableFeature;
+      #define OPTION_NBFUSETABLEFEATURE_ENTRY             {AMD_FAMILY_LN | AMD_FAMILY_ON, NbFuseTableFeature},
+    #else
+      #define OPTION_NBFUSETABLEFEATURE_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_NB_ENV_INIT
+      #define OPTION_NB_ENV_INIT TRUE
+    #endif
+    #if (OPTION_NB_ENV_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  NbInitAtEnv;
+      #define OPTION_NBINITATENVT_ENTRY                   {AMD_FAMILY_LN | AMD_FAMILY_ON, NbInitAtEnv},
+    #else
+      #define OPTION_NBINITATENVT_ENTRY
+    #endif
+
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_GFX_CONFIG_ENV_INIT
+      #define OPTION_GFX_CONFIG_ENV_INIT TRUE
+    #endif
+    #if (OPTION_GFX_CONFIG_ENV_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                   GfxConfigEnvInterface;
+      #define OPTION_GFXCONFIGENVINTERFACE_ENTRY           {AMD_FAMILY_LN | AMD_FAMILY_ON, GfxConfigEnvInterface},
+    #else
+      #define  OPTION_GFXCONFIGENVINTERFACE_ENTRY
+    #endif
+
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_GFX_ENV_INIT
+      #define OPTION_GFX_ENV_INIT TRUE
+    #endif
+    #if (OPTION_GFX_ENV_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  GfxInitAtEnvPost;
+      #define OPTION_GFXINITATENVPOST_ENTRY               {AMD_FAMILY_LN | AMD_FAMILY_ON, GfxInitAtEnvPost},
+    #else
+      #define OPTION_GFXINITATENVPOST_ENTRY
+    #endif
+
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_POWER_GATE
+      #define OPTION_POWER_GATE TRUE
+    #endif
+    #if (OPTION_POWER_GATE == TRUE) && (GNB_TYPE_LN == TRUE)
+      OPTION_GNB_FEATURE                                  F12NbPowerGateFeature;
+      #define OPTION_F12NBPOWERGATEFEATURE_ENTRY          {AMD_FAMILY_LN, F12NbPowerGateFeature},
+    #else
+      #define OPTION_F12NBPOWERGATEFEATURE_ENTRY
+    #endif
+    #if (OPTION_POWER_GATE == TRUE) && (GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  F14NbPowerGateFeature;
+      #define OPTION_F14NBPOWERGATEFEATURE_ENTRY          {AMD_FAMILY_ON, F14NbPowerGateFeature},
+    #else
+      #define OPTION_F14NBPOWERGATEFEATURE_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_PCIE_ENV_INIT
+      #define OPTION_PCIE_ENV_INIT TRUE
+    #endif
+    #if (OPTION_PCIE_ENV_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  PcieInitAtEnv;
+      #define OPTION_PCIEINITATENV_ENTRY                  {AMD_FAMILY_LN | AMD_FAMILY_ON, PcieInitAtEnv},
+    #else
+      #define OPTION_PCIEINITATENV_ENTRY
+    #endif
+
+  //---------------------------------------------------------------------------------------------------
+
+    OPTION_GNB_CONFIGURATION  GnbEnvFeatureTable[] = {
+      OPTION_NBFUSETABLEFEATURE_ENTRY
+      OPTION_NBINITATENVT_ENTRY
+      OPTION_PCIEINITATENV_ENTRY
+      OPTION_GFXCONFIGENVINTERFACE_ENTRY
+      OPTION_GFXINITATENVPOST_ENTRY
+      OPTION_F12NBPOWERGATEFEATURE_ENTRY
+      OPTION_F14NBPOWERGATEFEATURE_ENTRY
+      OPTION_KRNBPOWERGATEFEATURE_ENTRY
+      {0, NULL}
+    };
+  #endif
+
+  #if (AGESA_ENTRY_INIT_MID == TRUE)
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_GNB_CABLESAFE
+      #define OPTION_GNB_CABLESAFE TRUE
+    #endif
+    #if (OPTION_GNB_CABLESAFE == TRUE) && (GNB_TYPE_LN == TRUE)
+      OPTION_GNB_FEATURE                                  GnbCableSafeEntry;
+      #define OPTION_GNBCABLESAFEENTRY_ENTRY              {AMD_FAMILY_LN, GnbCableSafeEntry},
+    #else
+      #define OPTION_GNBCABLESAFEENTRY_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_NB_LCLK_NCLK_RATIO
+      #define OPTION_NB_LCLK_NCLK_RATIO TRUE
+    #endif
+    #if (OPTION_NB_LCLK_NCLK_RATIO == TRUE) && (GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  F14NbLclkNclkRatioFeature;
+      #define OPTION_F14NBLCLKNCLKRATIOFEATURE_ENTRY      {AMD_FAMILY_ON, F14NbLclkNclkRatioFeature},
+    #else
+      #define OPTION_F14NBLCLKNCLKRATIOFEATURE_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_NB_LCLK_DPM_INIT
+      #define OPTION_NB_LCLK_DPM_INIT TRUE
+    #endif
+    #if (OPTION_NB_LCLK_DPM_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  NbLclkDpmFeature;
+      #define OPTION_NBLCLKDPMFEATURE_ENTRY               {AMD_FAMILY_LN | AMD_FAMILY_ON, NbLclkDpmFeature},
+    #else
+      #define OPTION_NBLCLKDPMFEATURE_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_PCIE_POWER_GATE
+      #define OPTION_PCIE_POWER_GATE TRUE
+    #endif
+    #if (OPTION_PCIE_POWER_GATE == TRUE) && (GNB_TYPE_LN == TRUE)
+      OPTION_GNB_FEATURE                                  PciePowerGateFeature;
+      #define OPTION_PCIEPOWERGATEFEATURE_ENTRY           {AMD_FAMILY_LN, PciePowerGateFeature},
+    #else
+      #define OPTION_PCIEPOWERGATEFEATURE_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_GFX_MID_INIT
+      #define OPTION_GFX_MID_INIT TRUE
+    #endif
+    #if (OPTION_GFX_MID_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  GfxInitAtMidPost;
+      #define OPTION_GFXINITATMIDPOST_ENTRY               {AMD_FAMILY_LN | AMD_FAMILY_ON, GfxInitAtMidPost},
+    #else
+      #define OPTION_GFXINITATMIDPOST_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_GFX_INTEGRATED_TABLE_INIT
+      #define OPTION_GFX_INTEGRATED_TABLE_INIT TRUE
+    #endif
+    #if (OPTION_GFX_INTEGRATED_TABLE_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                 GfxIntegratedInfoTableEntry;
+      #define OPTION_GFXINTEGRATEDINFOTABLE_ENTRY        {AMD_FAMILY_LN | AMD_FAMILY_ON, GfxIntegratedInfoTableEntry},
+    #else
+      #define OPTION_GFXINTEGRATEDINFOTABLE_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_PCIe_MID_INIT
+      #define OPTION_PCIe_MID_INIT TRUE
+    #endif
+    #if (OPTION_PCIe_MID_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  PcieInitAtMid;
+      #define OPTION_PCIEINITATMID_ENTRY                  {AMD_FAMILY_LN | AMD_FAMILY_ON, PcieInitAtMid},
+    #else
+      #define OPTION_PCIEINITATMID_ENTRY
+    #endif
+
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_NB_MID_INIT
+      #define OPTION_NB_MID_INIT TRUE
+    #endif
+    #if (OPTION_NB_MID_INIT == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  NbInitAtLatePost;
+      #define OPTION_NBINITATLATEPOST_ENTRY               {AMD_FAMILY_LN | AMD_FAMILY_ON, NbInitAtLatePost},
+    #else
+      #define OPTION_NBINITATLATEPOST_ENTRY
+    #endif
+
+  //---------------------------------------------------------------------------------------------------
+    OPTION_GNB_CONFIGURATION  GnbMidFeatureTable[] = {
+      OPTION_GFXINITATMIDPOST_ENTRY
+      OPTION_GFXINTEGRATEDINFOTABLE_ENTRY
+      OPTION_GNBCABLESAFEENTRY_ENTRY
+      OPTION_PCIEINITATMID_ENTRY
+      OPTION_NBINITATLATEPOST_ENTRY
+      OPTION_F14NBLCLKNCLKRATIOFEATURE_ENTRY
+      OPTION_NBLCLKDPMFEATURE_ENTRY
+      OPTION_PCIEPOWERGATEFEATURE_ENTRY
+      {0, NULL}
+    };
+  #endif
+
+  #if (AGESA_ENTRY_INIT_LATE == TRUE)
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_ALIB
+      #define OPTION_ALIB FALSE
+    #endif
+    #if (OPTION_ALIB == TRUE) && (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+      OPTION_GNB_FEATURE                                  PcieAlibFeature;
+      #define OPTION_PCIEALIBFEATURE_ENTRY                {AMD_FAMILY_LN | AMD_FAMILY_ON, PcieAlibFeature},
+    #else
+      #define OPTION_PCIEALIBFEATURE_ENTRY
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    #ifndef OPTION_IOMMU_ACPI_IVRS
+      #define OPTION_IOMMU_ACPI_IVRS TRUE
+    #endif
+  //---------------------------------------------------------------------------------------------------
+    OPTION_GNB_CONFIGURATION  GnbLateFeatureTable[] = {
+      OPTION_PCIEALIBFEATURE_ENTRY
+      OPTIONIOMMUACPIIVRSLATE_ENTRY
+      {0, NULL}
+    };
+  #endif
+
+  #if  (GNB_TYPE_LN == TRUE || GNB_TYPE_ON == TRUE)
+    S3_DISPATCH_FUNCTION  NbSmuServiceRequestS3Script;
+    S3_DISPATCH_FUNCTION  PcieLateRestoreS3Script;
+    S3_DISPATCH_FUNCTION  NbSmuIndirectWriteS3Script;
+    #define GNB_S3_DISPATCH_FUNCTION_TABLE \
+    {NbSmuIndirectWriteS3Script_ID, NbSmuIndirectWriteS3Script}, \
+    {NbSmuServiceRequestS3Script_ID, NbSmuServiceRequestS3Script}, \
+    {PcieLateRestoreS3Script_ID, PcieLateRestoreS3Script},
+  #endif
+
+
+#endif
+#endif  // _OPTION_GNB_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionHtInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionHtInstall.h
new file mode 100644
index 0000000000..056777d079
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionHtInstall.h
@@ -0,0 +1,319 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Ht
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 51975 $   @e \$Date: 2011-04-29 01:33:06 -0600 (Fri, 29 Apr 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_HT_INSTALL_H_
+#define _OPTION_HT_INSTALL_H_
+
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNb.h"
+#include "htTopologies.h"
+/*
+ * Advanced Option only, hardware socket naming is the preferred method.
+ */
+#ifdef BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP
+  #define CFG_SYSTEM_PHYSICAL_SOCKET_MAP         (BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP)
+#else
+  #define CFG_SYSTEM_PHYSICAL_SOCKET_MAP         (NULL)
+#endif
+
+/*
+ * OPTION_IS_RECOVERY_HT is true if Basic API is being used.
+ */
+#ifndef OPTION_IS_RECOVERY_HT
+  #define OPTION_IS_RECOVERY_HT TRUE
+#endif
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition.
+ */
+
+#ifndef OPTION_MULTISOCKET
+  #error  BLDOPT: Option not defined: "OPTION_MULTISOCKET"
+#endif
+
+/*
+ * Based on user level options, set Ht internal options.
+ * For now, Family 10h support will assume single module.  For multi module,
+ * this will have to be changed to not set non-coherent only.
+ */
+#define OPTION_HT_NON_COHERENT_ONLY FALSE
+
+#if ((OPTION_FAMILY12H == TRUE) || (OPTION_FAMILY14H == TRUE))
+/* Families with only PCIe do not need a non-coherent only option. */
+#else
+  // Process Family 10h and 15h Models 00h-0Fh by socket, applying the MultiSocket option where it is allowable.
+  #if OPTION_G34_SOCKET_SUPPORT == FALSE
+  // Hydra has coherent support, other Family 10h should follow MultiSocket support.
+    #if OPTION_MULTISOCKET == FALSE
+      #undef OPTION_HT_NON_COHERENT_ONLY
+      #define OPTION_HT_NON_COHERENT_ONLY TRUE
+    #endif
+  #endif
+#endif
+
+/*
+ * Macros will generate the correct item reference based on options
+ */
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+  // Select the interface and features
+  #if ((OPTION_FAMILY12H == TRUE) || (OPTION_FAMILY14H == TRUE))
+    #define INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES NULL
+    #define INTERNAL_HT_OPTION_FEATURES     &HtFeaturesNone
+    #define INTERNAL_HT_OPTION_INTERFACE    &HtInterfaceMapsOnly
+  #else
+      // Family 10h and 15h Models 00h-0Fh
+      #if OPTION_HT_NON_COHERENT_ONLY == FALSE
+        #define INTERNAL_HT_OPTION_FEATURES     &HtFeaturesDefault
+        #define INTERNAL_HT_OPTION_INTERFACE    &HtInterfaceDefault
+      #else
+        #define INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES NULL
+        #define INTERNAL_HT_OPTION_FEATURES     &HtFeaturesNonCoherentOnly
+        #define INTERNAL_HT_OPTION_INTERFACE    &HtInterfaceNonCoherentOnly
+      #endif
+    #endif
+  // Select Northbridge components
+  #if OPTION_FAMILY10H == TRUE
+    #if OPTION_HT_NON_COHERENT_ONLY == TRUE
+      #define INTERNAL_HT_OPTION_FAM10_NB     &HtFam10NbNonCoherentOnly, &HtFam10RevDNbNonCoherentOnly, &HtFam10RevENbNonCoherentOnly,
+    #else
+      #define INTERNAL_HT_OPTION_FAM10_NB     &HtFam10NbDefault, &HtFam10RevDNbDefault, &HtFam10RevENbDefault,
+    #endif
+  #else
+    #define INTERNAL_HT_OPTION_FAM10_NB
+  #endif
+
+  #if OPTION_FAMILY12H == TRUE
+    #define INTERNAL_HT_OPTION_FAM12_NB     &HtFam12Nb,
+  #else
+    #define INTERNAL_HT_OPTION_FAM12_NB
+  #endif
+
+  #if OPTION_FAMILY14H == TRUE
+      #define INTERNAL_HT_OPTION_FAM14_NB     &HtFam14Nb,
+  #else
+    #define INTERNAL_HT_OPTION_FAM14_NB
+  #endif
+
+  #if OPTION_FAMILY15H == TRUE
+    #if OPTION_FAMILY15H_OR == TRUE
+      #if OPTION_HT_NON_COHERENT_ONLY == TRUE
+        #define INTERNAL_HT_OPTION_FAM15_NB     &HtFam15NbNonCoherentOnly,
+      #else
+        #define INTERNAL_HT_OPTION_FAM15_NB     &HtFam15NbDefault,
+      #endif
+    #else
+      #define INTERNAL_HT_OPTION_FAM15_NB
+    #endif
+      #define INTERNAL_HT_OPTION_FAM15TN_NB
+      #define INTERNAL_HT_OPTION_FAM15KM_NB
+  #else
+    #define INTERNAL_HT_OPTION_FAM15_NB
+    #define INTERNAL_HT_OPTION_FAM15TN_NB
+    #define INTERNAL_HT_OPTION_FAM15KM_NB
+  #endif
+
+  #define INTERNAL_ONLY_NB_LIST_ITEM INTERNAL_ONLY_HT_OPTION_SUPPORTED_NBS,
+  #ifndef INTERNAL_ONLY_HT_OPTION_SUPPORTED_NBS
+    #undef INTERNAL_ONLY_NB_LIST_ITEM
+    #define INTERNAL_ONLY_NB_LIST_ITEM
+  #endif
+
+  /* Install the correct set of northbridge implementations. Each item provides its own comma, the last item
+   * is ok to have a comma because the final item (NULL) is added below.
+   */
+  #define INTERNAL_HT_OPTION_SUPPORTED_NBS \
+                                             INTERNAL_ONLY_NB_LIST_ITEM \
+                                             INTERNAL_HT_OPTION_FAM10_NB \
+                                             INTERNAL_HT_OPTION_FAM15_NB \
+                                             INTERNAL_HT_OPTION_FAM12_NB \
+                                             INTERNAL_HT_OPTION_FAM14_NB
+#else
+  // Not Init Early
+  #define INTERNAL_HT_OPTION_FEATURES     NULL
+  #define INTERNAL_HT_OPTION_INTERFACE    NULL
+  #define INTERNAL_HT_OPTION_SUPPORTED_NBS NULL
+  #define HT_OPTIONS_PLATFORM             NULL
+  #define INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES NULL
+#endif
+
+#ifdef AGESA_ENTRY_INIT_EARLY
+  #if AGESA_ENTRY_INIT_EARLY == TRUE
+
+    extern HT_FEATURES HtFeaturesDefault;
+    extern HT_FEATURES HtFeaturesNonCoherentOnly;
+    extern HT_FEATURES HtFeaturesCoherentOnly;
+    extern HT_FEATURES HtFeaturesNone;
+    extern HT_INTERFACE HtInterfaceDefault;
+    extern HT_INTERFACE HtInterfaceNonCoherentOnly;
+    extern HT_INTERFACE HtInterfaceCoherentOnly;
+    extern HT_INTERFACE HtInterfaceMapsOnly;
+    extern HT_INTERFACE HtInterfaceNone;
+    extern NORTHBRIDGE HtFam10NbDefault;
+    extern NORTHBRIDGE HtFam10RevDNbDefault;
+    extern NORTHBRIDGE HtFam10NbNonCoherentOnly;
+    extern NORTHBRIDGE HtFam10RevDNbNonCoherentOnly;
+    extern NORTHBRIDGE HtFam10RevENbDefault;
+    extern NORTHBRIDGE HtFam10RevENbNonCoherentOnly;
+    extern NORTHBRIDGE HtFam12Nb;
+    extern NORTHBRIDGE HtFam14Nb;
+    extern NORTHBRIDGE HtFam10NbNone;
+    extern NORTHBRIDGE HtFam15NbDefault;
+    extern NORTHBRIDGE HtFam15NbNonCoherentOnly;
+
+    CONST VOID * CONST ROMDATA HtInstalledFamilyNorthbridgeList[] = {
+      INTERNAL_HT_OPTION_SUPPORTED_NBS
+      NULL
+    };
+
+    STATIC CONST AMD_HT_INTERFACE ROMDATA HtOptionsPlatform =
+    {
+      CFG_STARTING_BUSNUM, CFG_MAXIMUM_BUSNUM, CFG_ALLOCATED_BUSNUM,
+      (MANUAL_BUID_SWAP_LIST *)CFG_BUID_SWAP_LIST,
+      (DEVICE_CAP_OVERRIDE *)CFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST,
+      (CPU_TO_CPU_PCB_LIMITS *)CFG_HTFABRIC_LIMITS_LIST,
+      (IO_PCB_LIMITS *)CFG_HTCHAIN_LIMITS_LIST,
+      (OVERRIDE_BUS_NUMBERS *)CFG_BUS_NUMBERS_LIST,
+      (IGNORE_LINK *)CFG_IGNORE_LINK_LIST,
+      (SKIP_REGANG *)CFG_LINK_SKIP_REGANG_LIST,
+      (UINT8 **)CFG_ADDITIONAL_TOPOLOGIES_LIST,
+      (SYSTEM_PHYSICAL_SOCKET_MAP *)CFG_SYSTEM_PHYSICAL_SOCKET_MAP
+    };
+    #ifndef HT_OPTIONS_PLATFORM
+      #define HT_OPTIONS_PLATFORM &HtOptionsPlatform
+    #endif
+
+    /**
+     * A list of all the supported topologies.
+     *
+     */
+    #ifndef INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES
+      CONST UINT8 *CONST ROMDATA AmdTopolist[] =
+      {
+        amdHtTopologySingleNode,
+        amdHtTopologyDualNode,
+        amdHtTopologyThreeLine,
+        amdHtTopologyTriangle,
+        amdHtTopologyFourLine,
+        amdHtTopologyFourStar,
+        amdHtTopologyFourDegenerate,
+        amdHtTopologyFourSquare,
+        amdHtTopologyFourKite,
+        amdHtTopologyFourFully,
+        amdHtTopologyFiveFully,
+        amdHtTopologyFiveTwistedLadder,
+        amdHtTopologySixFully,
+        amdHtTopologySixDoubloonLower,
+        amdHtTopologySixDoubloonUpper,
+        amdHtTopologySixTwistedLadder,
+        amdHtTopologySevenFully,
+        amdHtTopologySevenTwistedLadder,
+        amdHtTopologyEightFully,
+        amdHtTopologyEightDoubloon,
+        amdHtTopologyEightTwistedLadder,
+        amdHtTopologyEightStraightLadder,
+        amdHtTopologySixTwinTriangles,
+        amdHtTopologyEightTwinFullyFourWays,
+        NULL
+      };
+      #define INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES AmdTopolist
+    #endif
+
+    /**
+     * Declare the instance of the Ht option configuration structure
+     */
+    CONST OPTION_HT_CONFIGURATION ROMDATA OptionHtConfiguration = {
+      OPTION_IS_RECOVERY_HT,
+      CFG_SET_HTCRC_SYNC_FLOOD,
+      CFG_USE_UNIT_ID_CLUMPING,
+      HT_OPTIONS_PLATFORM,
+      INTERNAL_HT_OPTION_INTERFACE,
+      INTERNAL_HT_OPTION_FEATURES,
+      &HtInstalledFamilyNorthbridgeList,
+      INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES
+    };
+
+  #endif
+#endif
+
+#ifndef OPTION_HT_INIIT_RESET_ENTRY
+
+  #define OPTION_HT_INIIT_RESET_ENTRY AmdHtInitReset
+  #define OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY AmdHtResetConstructor
+
+  #if ((OPTION_FAMILY12H == TRUE) || (OPTION_FAMILY14H == TRUE))
+    #undef OPTION_HT_INIIT_RESET_ENTRY
+    #undef OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY
+    #define OPTION_HT_INIIT_RESET_ENTRY NULL
+    #define OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY NULL
+  #endif
+
+  #if ((OPTION_FAMILY10H == TRUE) || (OPTION_FAMILY15H_OR == TRUE))
+    #undef OPTION_HT_INIIT_RESET_ENTRY
+    #undef OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY
+    #define OPTION_HT_INIIT_RESET_ENTRY AmdHtInitReset
+    #define OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY AmdHtResetConstructor
+  #endif
+
+#endif
+
+#ifdef AGESA_ENTRY_INIT_RESET
+  #if AGESA_ENTRY_INIT_RESET == TRUE
+
+    CONST AMD_HT_RESET_INTERFACE ROMDATA HtOptionResetDefaults = {
+      (MANUAL_BUID_SWAP_LIST *)CFG_BUID_SWAP_LIST,
+      0                                            // Unused by options
+    };
+
+    CONST OPTION_HT_INIT_RESET ROMDATA HtOptionInitReset = {
+      OPTION_HT_INIIT_RESET_ENTRY,
+      OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY
+    };
+  #endif
+
+#endif
+
+#endif  // _OPTION_HT_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionHwC1eInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionHwC1eInstall.h
new file mode 100644
index 0000000000..4580809a7b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionHwC1eInstall.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: HW C1e
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_HW_C1E_INSTALL_H_
+#define _OPTION_HW_C1E_INSTALL_H_
+
+#include "cpuHwC1e.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_HW_C1E_FEAT
+#define F10_HW_C1E_SUPPORT
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+  #ifdef OPTION_FAMILY10H
+    #if OPTION_FAMILY10H == TRUE
+      #if (OPTION_FAMILY10H_BL == TRUE) || (OPTION_FAMILY10H_DA == TRUE) || (OPTION_FAMILY10H_RB == TRUE) || (OPTION_FAMILY10H_PH == TRUE)
+        extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureHwC1e;
+        #undef OPTION_HW_C1E_FEAT
+        #define OPTION_HW_C1E_FEAT &CpuFeatureHwC1e,
+        extern CONST HW_C1E_FAMILY_SERVICES ROMDATA F10HwC1e;
+        #undef F10_HW_C1E_SUPPORT
+        #define F10_HW_C1E_SUPPORT {(AMD_FAMILY_10_BL | AMD_FAMILY_10_DA | AMD_FAMILY_10_RB | AMD_FAMILY_10_PH), &F10HwC1e},
+      #endif
+    #endif
+  #endif
+  CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA HwC1eFamilyServiceArray[] =
+  {
+    F10_HW_C1E_SUPPORT
+    {0, NULL}
+  };
+  CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA HwC1eFamilyServiceTable =
+  {
+    (sizeof (HwC1eFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+    &HwC1eFamilyServiceArray[0]
+  };
+#endif
+
+#endif  // _OPTION_HW_C1E_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionIdsInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionIdsInstall.h
new file mode 100644
index 0000000000..16cd68cfbf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionIdsInstall.h
@@ -0,0 +1,588 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * IDS Option Install File
+ *
+ * This file generates the defaults tables for family 10h model 5 processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 55277 $   @e \$Date: 2011-06-19 23:03:21 -0600 (Sun, 19 Jun 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+#ifndef _OPTION_IDS_INSTALL_H_
+#define _OPTION_IDS_INSTALL_H_
+#include "Ids.h"
+#include "IdsHt.h"
+#include "IdsLib.h"
+#ifdef __IDS_EXTENDED__
+  #include OPTION_IDS_EXT_INSTALL_FILE
+#endif
+
+#define IDS_LATE_RUN_AP_TASK
+
+#define M_HTIDS_PORT_OVERRIDE_HOOK (PF_HtIdsGetPortOverride)CommonVoid
+#if (IDSOPT_IDS_ENABLED == TRUE)
+  #if (IDSOPT_CONTROL_ENABLED == TRUE)
+    // Check for all families which include HT Features.
+    #if ((OPTION_FAMILY10H == TRUE) || (OPTION_FAMILY15H_OR == TRUE) || (OPTION_FAMILY15H_KM == TRUE)) && (AGESA_ENTRY_INIT_POST == TRUE)
+      #undef M_HTIDS_PORT_OVERRIDE_HOOK
+      #define M_HTIDS_PORT_OVERRIDE_HOOK HtIdsGetPortOverride
+    #endif
+  #endif
+#endif // OPTION_IDS_LEVEL
+CONST PF_HtIdsGetPortOverride ROMDATA pf_HtIdsGetPortOverride = M_HTIDS_PORT_OVERRIDE_HOOK;
+
+#if (IDSOPT_IDS_ENABLED == TRUE)
+  #if (AGESA_ENTRY_INIT_LATE == TRUE)
+    #undef IDS_LATE_RUN_AP_TASK
+    #define IDS_LATE_RUN_AP_TASK
+  #endif
+#endif // OPTION_IDS_LEVEL
+
+#if (IDSOPT_TRACING_ENABLED == TRUE)
+  #if (AGESA_ENTRY_INIT_POST == TRUE)
+    #include <mu.h>
+    CONST SCRIPT_FUNCTION ROMDATA ScriptFuncList[] = {
+      { (UINT32) (UINT64) MemUWriteCachelines, "WriteCl(PhyAddrLo,BufferAddr,ClCnt)"},
+      { (UINT32) (UINT64) MemUReadCachelines,  "ReadCl(BufferAddr,PhyAddrLo,ClCnt)"},
+      { (UINT32) (UINT64) MemUFlushPattern,    "FlushCl(PhyAddrLo,ClCnt)"}
+    };
+  #elif (AGESA_ENTRY_INIT_RECOVERY == TRUE)
+    #include <mru.h>
+    CONST SCRIPT_FUNCTION ROMDATA ScriptFuncList[] = {
+      { (UINT32) (UINT64) MemRecUWrite1CL, "Write1Cl(PhyAddrLo,BufferAddr)"},
+      { (UINT32) (UINT64) MemRecURead1CL,  "Read1Cl(BufferAddr,PhyAddrLo)"},
+      { (UINT32) (UINT64) MemRecUFlushPattern,    "Flush1Cl(PhyAddrLo)"}
+    };
+  #else
+    CONST SCRIPT_FUNCTION ROMDATA ScriptFuncList[] = {
+      { (UINT32) (UINT64) CommonReturnFalse, "DefRet()"},
+      { (UINT32) (UINT64) CommonReturnFalse,  "DefRet()"},
+      { (UINT32) (UINT64) CommonReturnFalse,    "DefRet()"}
+    };
+  #endif
+#else
+  CONST SCRIPT_FUNCTION ROMDATA ScriptFuncList[] = {
+    { (UINT32) (UINT64) CommonReturnFalse, "DefRet()"},
+    { (UINT32) (UINT64) CommonReturnFalse,  "DefRet()"},
+    { (UINT32) (UINT64) CommonReturnFalse,    "DefRet()"}
+  };
+#endif
+
+
+#define NV_TO_CMOS(Len, NV_ID) {Len, NV_ID},
+#define OPTION_IDS_NV_TO_CMOS_END NV_TO_CMOS (IDS_NV_TO_CMOS_LEN_END, IDS_NV_TO_CMOS_ID_END)
+#if (IDSOPT_IDS_ENABLED == TRUE)
+  #if ((IDSOPT_CONTROL_ENABLED == TRUE) && \
+       ((AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_ENV == TRUE) || \
+        (AGESA_ENTRY_INIT_MID == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || \
+        (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE)))
+    #if (IDSOPT_CONTROL_NV_TO_CMOS == TRUE)
+      #define OPTION_IDS_NV_TO_CMOS_COMMON
+
+      #ifdef OPTION_FAMILY10H
+        #if OPTION_FAMILY10H == TRUE
+          #define OPTION_IDS_NV_TO_CMOS_F10
+        #endif
+      #endif
+
+      #ifdef OPTION_FAMILY12H
+        #if OPTION_FAMILY12H == TRUE
+          #define OPTION_IDS_NV_TO_CMOS_F12
+        #endif
+      #endif
+
+      #ifdef OPTION_FAMILY14H
+        #if OPTION_FAMILY14H == TRUE
+          #define OPTION_IDS_NV_TO_CMOS_F14
+        #endif
+      #endif
+
+      #ifdef OPTION_FAMILY15H_OR
+        #if OPTION_FAMILY15H_OR == TRUE
+          #define OPTION_IDS_NV_TO_CMOS_F15_OR
+        #endif
+      #endif
+
+      #ifdef OPTION_FAMILY15H_TN
+        #if OPTION_FAMILY15H_TN == TRUE
+          #define OPTION_IDS_NV_TO_CMOS_F15_TN\
+            {IDS_NV_TO_CMOS_LEN_BYTE, AGESA_IDS_NV_UCODE},
+        #endif
+      #endif
+
+      #ifndef OPTION_IDS_NV_TO_CMOS_F10
+        #define OPTION_IDS_NV_TO_CMOS_F10
+      #endif
+
+      #ifndef OPTION_IDS_NV_TO_CMOS_F12
+        #define OPTION_IDS_NV_TO_CMOS_F12
+      #endif
+
+      #ifndef OPTION_IDS_NV_TO_CMOS_F14
+        #define OPTION_IDS_NV_TO_CMOS_F14
+      #endif
+
+      #ifndef OPTION_IDS_NV_TO_CMOS_F15_OR
+        #define OPTION_IDS_NV_TO_CMOS_F15_OR
+      #endif
+
+      #ifndef OPTION_IDS_NV_TO_CMOS_F15_TN
+        #define OPTION_IDS_NV_TO_CMOS_F15_TN
+      #endif
+
+      #ifndef OPTION_IDS_NV_TO_CMOS_EXTEND
+        #define OPTION_IDS_NV_TO_CMOS_EXTEND
+      #endif
+
+      IDS_NV_TO_CMOS gIdsNVToCmos[] = {
+        OPTION_IDS_NV_TO_CMOS_COMMON
+        OPTION_IDS_NV_TO_CMOS_F10
+        OPTION_IDS_NV_TO_CMOS_F12
+        OPTION_IDS_NV_TO_CMOS_F14
+        OPTION_IDS_NV_TO_CMOS_F15_OR
+        OPTION_IDS_NV_TO_CMOS_F15_TN
+        OPTION_IDS_NV_TO_CMOS_EXTEND
+        OPTION_IDS_NV_TO_CMOS_END
+      };
+    #else
+      IDS_NV_TO_CMOS gIdsNVToCmos[] = {
+        OPTION_IDS_NV_TO_CMOS_END
+      };
+    #endif
+  #else
+    IDS_NV_TO_CMOS gIdsNVToCmos[] = {
+      OPTION_IDS_NV_TO_CMOS_END
+    };
+  #endif
+#else
+  IDS_NV_TO_CMOS gIdsNVToCmos[] = {
+    OPTION_IDS_NV_TO_CMOS_END
+  };
+#endif
+
+///Ids Feat Options
+#if ((IDSOPT_IDS_ENABLED == TRUE) && \
+     ((AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_ENV == TRUE) || \
+      (AGESA_ENTRY_INIT_MID == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || \
+      (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE)))
+  #if (IDSOPT_CONTROL_ENABLED == TRUE)
+    #ifndef OPTION_IDS_EXTEND_FEATS
+      #define OPTION_IDS_EXTEND_FEATS
+    #endif
+
+    #define OPTION_IDS_FEAT_ECCCTRL\
+                OPTION_IDS_FEAT_ECCCTRL_F10 \
+                OPTION_IDS_FEAT_ECCCTRL_F12 \
+                OPTION_IDS_FEAT_ECCCTRL_F15_OR
+
+    #define OPTION_IDS_FEAT_GNB_PLATFORMCFG\
+                OPTION_IDS_FEAT_GNB_PLATFORMCFGF12 \
+                OPTION_IDS_FEAT_GNB_PLATFORMCFGF14 \
+                OPTION_IDS_FEAT_GNB_PLATFORMCFGF15TN
+
+    #define OPTION_IDS_FEAT_CPB_CTRL\
+                OPTION_IDS_FEAT_CPB_CTRL_F12
+
+    #define OPTION_IDS_FEAT_HTC_CTRL\
+                OPTION_IDS_FEAT_HTC_CTRL_F15_OR \
+                OPTION_IDS_FEAT_HTC_CTRL_F15_TN
+
+    #define OPTION_IDS_FEAT_MEMORY_MAPPING\
+                OPTION_IDS_FEAT_MEMORY_MAPPING_F12 \
+                OPTION_IDS_FEAT_MEMORY_MAPPING_F15_OR \
+                OPTION_IDS_FEAT_MEMORY_MAPPING_F15_TN
+
+    #define OPTION_IDS_FEAT_HT_ASSIST\
+                OPTION_IDS_FEAT_HT_ASSIST_F10HY \
+                OPTION_IDS_FEAT_HT_ASSIST_F15_OR
+
+    #define OPTION_IDS_FEAT_ECCSYMBOLSIZE\
+                OPTION_IDS_FEAT_ECCSYMBOLSIZE_F10 \
+                OPTION_IDS_FEAT_ECCSYMBOLSIZE_F15_OR
+
+/*----------------------------------------------------------------------------
+ *                        Family 10 feat blocks
+ *
+ *----------------------------------------------------------------------------
+ */
+    #define OPTION_IDS_FEAT_ECCSYMBOLSIZE_F10
+    #define OPTION_IDS_FEAT_ECCCTRL_F10
+    #ifdef OPTION_FAMILY10H
+      #if OPTION_FAMILY10H == TRUE
+//Ecc symbol size
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatEccSymbolSizeBlockF10;
+        #undef OPTION_IDS_FEAT_ECCSYMBOLSIZE_F10
+        #define OPTION_IDS_FEAT_ECCSYMBOLSIZE_F10 &IdsFeatEccSymbolSizeBlockF10,
+
+//ECC scrub control
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatEccCtrlBlockF10;
+        #undef OPTION_IDS_FEAT_ECCCTRL_F10
+        #define OPTION_IDS_FEAT_ECCCTRL_F10 &IdsFeatEccCtrlBlockF10,
+      #endif
+    #endif
+
+    //Misc Features
+    #define OPTION_IDS_FEAT_HT_ASSIST_F10HY
+    #ifdef OPTION_FAMILY10H_HY
+      #if OPTION_FAMILY10H_HY == TRUE
+        #undef OPTION_IDS_FEAT_HT_ASSIST_F10HY
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHtAssistBlockPlatformCfgF10Hy;
+
+        #define OPTION_IDS_FEAT_HT_ASSIST_F10HY \
+                    &IdsFeatHtAssistBlockPlatformCfgF10Hy,
+      #endif
+    #endif
+/*----------------------------------------------------------------------------
+ *                        Family 12 feat blocks
+ *
+ *----------------------------------------------------------------------------
+ */
+    #define OPTION_IDS_FEAT_GNB_PLATFORMCFGF12
+    #define OPTION_IDS_FEAT_ECCCTRL_F12
+    #define OPTION_IDS_FEAT_CPB_CTRL_F12
+    #define OPTION_IDS_FEAT_MEMORY_MAPPING_F12
+    #ifdef OPTION_FAMILY12H
+      #if OPTION_FAMILY12H == TRUE
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatGnbPlatformCfgBlockF12;
+        #undef OPTION_IDS_FEAT_GNB_PLATFORMCFGF12
+        #define OPTION_IDS_FEAT_GNB_PLATFORMCFGF12 &IdsFeatGnbPlatformCfgBlockF12,
+
+        //ECC scrub control
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatEccCtrlBlockF12;
+        #undef OPTION_IDS_FEAT_ECCCTRL_F12
+        #define OPTION_IDS_FEAT_ECCCTRL_F12 &IdsFeatEccCtrlBlockF12,
+
+        #undef OPTION_IDS_FEAT_CPB_CTRL_F12
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatCpbCtrlBlockF12;
+        #define OPTION_IDS_FEAT_CPB_CTRL_F12 &IdsFeatCpbCtrlBlockF12,
+
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatMemoryChIntlvPostBeforeBlockF12;
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatMemoryMappingChIntlvBlockF12;
+        #undef OPTION_IDS_FEAT_MEMORY_MAPPING_F12
+        #define OPTION_IDS_FEAT_MEMORY_MAPPING_F12 \
+                    &IdsFeatMemoryChIntlvPostBeforeBlockF12, \
+                    &IdsFeatMemoryMappingChIntlvBlockF12,
+
+      #endif
+    #endif
+
+/*----------------------------------------------------------------------------
+ *                        Family 14 feat blocks
+ *
+ *----------------------------------------------------------------------------
+ */
+    #define OPTION_IDS_FEAT_GNB_PLATFORMCFGF14
+    #ifdef OPTION_FAMILY14H
+      #if OPTION_FAMILY14H == TRUE
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatGnbPlatformCfgBlockF14;
+        #undef OPTION_IDS_FEAT_GNB_PLATFORMCFGF14
+        #define OPTION_IDS_FEAT_GNB_PLATFORMCFGF14 &IdsFeatGnbPlatformCfgBlockF14,
+      #endif
+    #endif
+
+/*----------------------------------------------------------------------------
+ *                        Family 15 OR feat blocks
+ *
+ *----------------------------------------------------------------------------
+ */
+    #define OPTION_IDS_FEAT_HTC_CTRL_F15_OR
+    #define OPTION_IDS_FEAT_MEMORY_MAPPING_F15_OR
+    #define OPTION_IDS_FEAT_HT_ASSIST_F15_OR
+    #define OPTION_IDS_FEAT_ECCCTRL_F15_OR
+    #define OPTION_IDS_FEAT_ECCSYMBOLSIZE_F15_OR
+    #ifdef OPTION_FAMILY15H_OR
+      #if OPTION_FAMILY15H_OR == TRUE
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHtcControlBlockF15Or;
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHtcControlLateBlockF15Or;
+        #undef OPTION_IDS_FEAT_HTC_CTRL_F15_OR
+        #define OPTION_IDS_FEAT_HTC_CTRL_F15_OR\
+                    &IdsFeatHtcControlBlockF15Or,\
+                    &IdsFeatHtcControlLateBlockF15Or,
+
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatMemoryMappingPostBeforeBlockF15Or;
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatMemoryMappingChIntlvBlockF15Or;
+        #undef OPTION_IDS_FEAT_MEMORY_MAPPING_F15_OR
+        #define OPTION_IDS_FEAT_MEMORY_MAPPING_F15_OR\
+        &IdsFeatMemoryMappingPostBeforeBlockF15Or,\
+        &IdsFeatMemoryMappingChIntlvBlockF15Or,
+
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHtAssistBlockPlatformCfgF15Or;
+        #undef OPTION_IDS_FEAT_HT_ASSIST_F15_OR
+        #define OPTION_IDS_FEAT_HT_ASSIST_F15_OR\
+        &IdsFeatHtAssistBlockPlatformCfgF15Or,
+
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatEccCtrlBlockF15Or;
+        #undef OPTION_IDS_FEAT_ECCCTRL_F15_OR
+        #define OPTION_IDS_FEAT_ECCCTRL_F15_OR &IdsFeatEccCtrlBlockF15Or,
+
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatEccSymbolSizeBlockF15Or;
+        #undef OPTION_IDS_FEAT_ECCSYMBOLSIZE_F15_OR
+        #define OPTION_IDS_FEAT_ECCSYMBOLSIZE_F15_OR &IdsFeatEccSymbolSizeBlockF15Or,
+
+      #endif
+    #endif
+/*----------------------------------------------------------------------------
+ *                        Family 15 TN feat blocks
+ *
+ *----------------------------------------------------------------------------
+ */
+    #define OPTION_IDS_FEAT_HTC_CTRL_F15_TN
+    #define OPTION_IDS_FEAT_MEMORY_MAPPING_F15_TN
+    #define OPTION_IDS_FEAT_GNB_PLATFORMCFGF15TN
+    #ifdef OPTION_FAMILY15H_TN
+      #if OPTION_FAMILY15H_TN == TRUE
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHtcControlBlockF15Tn;
+        #undef OPTION_IDS_FEAT_HTC_CTRL_F15_TN
+        #define OPTION_IDS_FEAT_HTC_CTRL_F15_TN\
+                    &IdsFeatHtcControlBlockF15Tn,
+
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatMemoryMappingPostBeforeBlockF15Tn;
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatMemoryMappingChIntlvBlockF15Tn;
+        #undef OPTION_IDS_FEAT_MEMORY_MAPPING_F15_TN
+        #define OPTION_IDS_FEAT_MEMORY_MAPPING_F15_TN\
+        &IdsFeatMemoryMappingPostBeforeBlockF15Tn,\
+        &IdsFeatMemoryMappingChIntlvBlockF15Tn,
+
+        extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatGnbPlatformCfgBlockF15Tn;
+        #undef OPTION_IDS_FEAT_GNB_PLATFORMCFGF15TN
+        #define OPTION_IDS_FEAT_GNB_PLATFORMCFGF15TN &IdsFeatGnbPlatformCfgBlockF15Tn,
+      #endif
+    #endif
+
+    #define OPTION_IDS_FEAT_NV_TO_CMOS
+    #if IDSOPT_CONTROL_NV_TO_CMOS == TRUE
+      #undef OPTION_IDS_FEAT_NV_TO_CMOS
+      extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatNvToCmosSaveBlock;
+      extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatNvToCmosRestoreBlock;
+      #define OPTION_IDS_FEAT_NV_TO_CMOS\
+        &IdsFeatNvToCmosSaveBlock, \
+        &IdsFeatNvToCmosRestoreBlock,
+
+    #endif
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatUcodeBlock =
+    {
+      IDS_FEAT_UCODE_UPDATE,
+      IDS_ALL_CORES,
+      IDS_UCODE,
+      IDS_FAMILY_ALL,
+      IdsSubUCode
+    };
+
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatPowerPolicyBlock =
+    {
+      IDS_FEAT_POWER_POLICY,
+      IDS_ALL_CORES,
+      IDS_PLATFORMCFG_OVERRIDE,
+      IDS_FAMILY_ALL,
+      IdsSubPowerPolicyOverride
+    };
+
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatTargetPstateBlock =
+    {
+      IDS_FEAT_TARGET_PSTATE,
+      IDS_BSP_ONLY,
+      IDS_INIT_LATE_AFTER,
+      IDS_FAMILY_ALL,
+      IdsSubTargetPstate
+    };
+
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatPostPstateBlock =
+    {
+      IDS_FEAT_POSTPSTATE,
+      IDS_ALL_CORES,
+      IDS_CPU_Early_Override,
+      IDS_FAMILY_ALL,
+      IdsSubPostPState
+    };
+
+    //Dram controller Features
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatDctAllMemClkBlock =
+    {
+      IDS_FEAT_DCT_ALLMEMCLK,
+      IDS_BSP_ONLY,
+      IDS_ALL_MEMORY_CLOCK,
+      IDS_FAMILY_ALL,
+      IdsSubAllMemClkEn
+    };
+
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatDctGangModeBlock =
+    {
+      IDS_FEAT_DCT_GANGMODE,
+      IDS_BSP_ONLY,
+      IDS_GANGING_MODE,
+      IDS_FAMILY_ALL,
+      IdsSubGangingMode
+    };
+
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatDctBurstLengthBlock =
+    {
+      IDS_FEAT_DCT_BURSTLENGTH,
+      IDS_BSP_ONLY,
+      IDS_BURST_LENGTH32,
+      AMD_FAMILY_10,
+      IdsSubBurstLength32
+    };
+
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatDctPowerDownCtrlBlock =
+    {
+      IDS_FEAT_DCT_POWERDOWN,
+      IDS_BSP_ONLY,
+      IDS_INIT_POST_BEFORE,
+      IDS_FAMILY_ALL,
+      IdsSubPowerDownCtrl
+    };
+
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatDctDllShutDownBlock =
+    {
+      IDS_FEAT_DCT_DLLSHUTDOWN,
+      IDS_BSP_ONLY,
+      IDS_DLL_SHUT_DOWN,
+      IDS_FAMILY_ALL,
+      IdsSubDllShutDownSR
+    };
+
+
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatDctPowerDownModeBlock =
+    {
+      IDS_FEAT_DCT_POWERDOWN,
+      IDS_BSP_ONLY,
+      IDS_POWERDOWN_MODE,
+      IDS_FAMILY_ALL,
+      IdsSubPowerDownMode
+    };
+
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHdtOutBlock =
+    {
+      IDS_FEAT_HDTOUT,
+      IDS_BSP_ONLY,
+      IDS_INIT_EARLY_BEFORE,
+      IDS_FAMILY_ALL,
+      IdsSubHdtOut
+    };
+
+    CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHtSettingBlock =
+    {
+      IDS_FEAT_HT_SETTING,
+      IDS_BSP_ONLY,
+      IDS_HT_CONTROL,
+      IDS_FAMILY_ALL,
+      IdsSubHtLinkControl
+    };
+
+    CONST IDS_FAMILY_FEAT_STRUCT* ROMDATA IdsContorlFeats[] =
+    {
+      &IdsFeatUcodeBlock,
+      &IdsFeatPowerPolicyBlock,
+
+      &IdsFeatTargetPstateBlock,
+
+      &IdsFeatPostPstateBlock,
+
+      OPTION_IDS_FEAT_NV_TO_CMOS
+
+      OPTION_IDS_FEAT_ECCSYMBOLSIZE
+
+      OPTION_IDS_FEAT_ECCCTRL
+
+      &IdsFeatDctAllMemClkBlock,
+
+      &IdsFeatDctGangModeBlock,
+
+      &IdsFeatDctBurstLengthBlock,
+
+      &IdsFeatDctPowerDownCtrlBlock,
+
+      &IdsFeatDctPowerDownModeBlock,
+
+      &IdsFeatDctPowerDownModeBlock,
+
+      OPTION_IDS_FEAT_HT_ASSIST
+
+      &IdsFeatHdtOutBlock,
+
+      &IdsFeatHtSettingBlock,
+
+      OPTION_IDS_FEAT_GNB_PLATFORMCFG
+
+      OPTION_IDS_FEAT_CPB_CTRL
+
+      OPTION_IDS_FEAT_HTC_CTRL
+
+      OPTION_IDS_FEAT_MEMORY_MAPPING
+
+      OPTION_IDS_EXTEND_FEATS
+
+      NULL
+    };
+  #else
+    CONST IDS_FAMILY_FEAT_STRUCT* ROMDATA IdsContorlFeats[] =
+    {
+      NULL
+    };
+  #endif//IDSOPT_CONTROL_ENABLED
+
+  #define OPTION_IDS_FAM_REGACC\
+            OPTION_IDS_FAM_REGACC_F15TN
+
+  #define OPTION_IDS_FAM_REGACC_F15TN
+  #ifdef OPTION_FAMILY15H_TN
+    #if OPTION_FAMILY15H_TN == TRUE
+      extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatRegGmmxF15Tn;
+      #undef OPTION_IDS_FAM_REGACC_F15TN
+      #define OPTION_IDS_FAM_REGACC_F15TN \
+                &IdsFeatRegGmmxF15Tn,
+    #endif
+  #endif
+
+  CONST IDS_FAMILY_FEAT_STRUCT* ROMDATA IdsRegAccessTbl[] =
+  {
+    OPTION_IDS_FAM_REGACC
+    NULL
+  };
+
+#else
+  CONST IDS_FAMILY_FEAT_STRUCT* ROMDATA IdsContorlFeats[] =
+  {
+    NULL
+  };
+
+  CONST IDS_FAMILY_FEAT_STRUCT* ROMDATA IdsRegAccessTbl[] =
+  {
+    NULL
+  };
+#endif// IDSOPT_IDS_ENABLED
+
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionIoCstateInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionIoCstateInstall.h
new file mode 100644
index 0000000000..f83ad70f5d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionIoCstateInstall.h
@@ -0,0 +1,133 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: IO C-state
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_IO_CSTATE_INSTALL_H_
+#define _OPTION_IO_CSTATE_INSTALL_H_
+
+#include "cpuIoCstate.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+
+#define OPTION_IO_CSTATE_FEAT
+#define F10_IO_CSTATE_SUPPORT
+#define F12_IO_CSTATE_SUPPORT
+#define F14_IO_CSTATE_SUPPORT
+#define F15_OR_IO_CSTATE_SUPPORT
+
+#if OPTION_IO_CSTATE == TRUE
+  #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+    #ifdef OPTION_FAMILY10H
+      #if OPTION_FAMILY10H == TRUE
+        #if OPTION_FAMILY10H_PH == TRUE
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureIoCstate;
+          #undef OPTION_IO_CSTATE_FEAT
+          #define OPTION_IO_CSTATE_FEAT &CpuFeatureIoCstate,
+          extern CONST IO_CSTATE_FAMILY_SERVICES ROMDATA F10IoCstateSupport;
+          #undef F10_IO_CSTATE_SUPPORT
+          #define F10_IO_CSTATE_SUPPORT {AMD_FAMILY_10_PH, &F10IoCstateSupport},
+        #endif
+      #endif
+    #endif
+
+    #ifdef OPTION_FAMILY12H
+      #if OPTION_FAMILY12H == TRUE
+        #if OPTION_FAMILY12H_LN == TRUE
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureIoCstate;
+          #undef OPTION_IO_CSTATE_FEAT
+          #define OPTION_IO_CSTATE_FEAT &CpuFeatureIoCstate,
+          extern CONST IO_CSTATE_FAMILY_SERVICES ROMDATA F12IoCstateSupport;
+          #undef F12_IO_CSTATE_SUPPORT
+          #define F12_IO_CSTATE_SUPPORT {AMD_FAMILY_12_LN, &F12IoCstateSupport},
+        #endif
+      #endif
+    #endif
+
+    #ifdef OPTION_FAMILY14H
+      #if OPTION_FAMILY14H == TRUE
+        #if (OPTION_FAMILY14H_ON == TRUE)
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureIoCstate;
+          #undef OPTION_IO_CSTATE_FEAT
+          #define OPTION_IO_CSTATE_FEAT &CpuFeatureIoCstate,
+          extern CONST IO_CSTATE_FAMILY_SERVICES ROMDATA F14IoCstateSupport;
+          #undef F14_IO_CSTATE_SUPPORT
+          #define F14_IO_CSTATE_SUPPORT {AMD_FAMILY_14, &F14IoCstateSupport},
+        #endif
+      #endif
+    #endif
+
+    #ifdef OPTION_FAMILY15H
+      #if OPTION_FAMILY15H == TRUE
+        #if OPTION_FAMILY15H_OR == TRUE
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureIoCstate;
+          #undef OPTION_IO_CSTATE_FEAT
+          #define OPTION_IO_CSTATE_FEAT &CpuFeatureIoCstate,
+          extern CONST IO_CSTATE_FAMILY_SERVICES ROMDATA F15OrIoCstateSupport;
+          #undef F15_OR_IO_CSTATE_SUPPORT
+          #define F15_OR_IO_CSTATE_SUPPORT {AMD_FAMILY_15_OR, &F15OrIoCstateSupport},
+        #endif
+      #endif
+    #endif
+
+  #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA IoCstateFamilyServiceArray[] =
+{
+  F10_IO_CSTATE_SUPPORT
+  F12_IO_CSTATE_SUPPORT
+  F14_IO_CSTATE_SUPPORT
+  F15_OR_IO_CSTATE_SUPPORT
+  {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA IoCstateFamilyServiceTable =
+{
+  (sizeof (IoCstateFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+  &IoCstateFamilyServiceArray[0]
+};
+
+#endif // _OPTION_IO_CSTATE_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionL3FeaturesInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionL3FeaturesInstall.h
new file mode 100644
index 0000000000..5804f1dacb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionL3FeaturesInstall.h
@@ -0,0 +1,119 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: L3 Dependent Features
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 56186 $   @e \$Date: 2011-07-08 15:35:23 -0600 (Fri, 08 Jul 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_L3_FEATURES_INSTALL_H_
+#define _OPTION_L3_FEATURES_INSTALL_H_
+
+#include "cpuL3Features.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_L3_FEAT
+#define F10_L3_FEAT_SUPPORT
+#define F15_OR_L3_FEAT_SUPPORT
+#define F15_KM_L3_FEAT_SUPPORT
+#define L3_FEAT_AP_DISABLE_CACHE
+#define L3_FEAT_AP_ENABLE_CACHE
+
+#if (OPTION_HT_ASSIST == TRUE || OPTION_ATM_MODE == TRUE)
+  #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_MID == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE)
+    extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuL3Features;
+
+    #ifdef  OPTION_FAMILY10H
+      #if OPTION_FAMILY10H == TRUE
+        #if OPTION_FAMILY10H_HY == TRUE
+          #undef OPTION_L3_FEAT
+          #define OPTION_L3_FEAT &CpuL3Features,
+          extern CONST L3_FEATURE_FAMILY_SERVICES ROMDATA F10L3Features;
+          #undef F10_L3_FEAT_SUPPORT
+          #define F10_L3_FEAT_SUPPORT {AMD_FAMILY_10_HY, &F10L3Features},
+        #endif
+      #endif
+    #endif
+
+    #ifdef  OPTION_FAMILY15H_OR
+      #if OPTION_FAMILY15H_OR == TRUE
+        #undef OPTION_L3_FEAT
+        #define OPTION_L3_FEAT &CpuL3Features,
+        extern CONST L3_FEATURE_FAMILY_SERVICES ROMDATA F15OrL3Features;
+        #undef F15_OR_L3_FEAT_SUPPORT
+        #define F15_OR_L3_FEAT_SUPPORT {AMD_FAMILY_15_OR, &F15OrL3Features},
+      #endif
+    #endif
+
+    #ifdef OPTION_FAMILY15H_KM
+      #if OPTION_FAMILY15H_KM == TRUE
+        #undef OPTION_L3_FEAT
+        #define OPTION_L3_FEAT &CpuL3Features,
+        extern CONST L3_FEATURE_FAMILY_SERVICES ROMDATA F15KmL3Features;
+        #undef F15_KM_L3_FEAT_SUPPORT
+        #define F15_KM_L3_FEAT_SUPPORT {AMD_FAMILY_15_KM, &F15KmL3Features},
+      #endif
+    #endif
+
+    #undef AGESA_ENTRY_LATE_RUN_AP_TASK
+    #define AGESA_ENTRY_LATE_RUN_AP_TASK TRUE
+    #undef L3_FEAT_AP_DISABLE_CACHE
+    #define L3_FEAT_AP_DISABLE_CACHE {AP_LATE_TASK_DISABLE_CACHE, (IMAGE_ENTRY) DisableAllCaches},
+    #undef L3_FEAT_AP_ENABLE_CACHE
+    #define L3_FEAT_AP_ENABLE_CACHE {AP_LATE_TASK_ENABLE_CACHE, (IMAGE_ENTRY) EnableAllCaches},
+  #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA L3FeatureFamilyServiceArray[] =
+{
+  F10_L3_FEAT_SUPPORT
+  F15_OR_L3_FEAT_SUPPORT
+  F15_KM_L3_FEAT_SUPPORT
+  {0, NULL}
+};
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA L3FeatureFamilyServiceTable =
+{
+  (sizeof (L3FeatureFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+  &L3FeatureFamilyServiceArray[0]
+};
+
+#endif  // _OPTION_L3_FEATURES_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionLowPwrPstateInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionLowPwrPstateInstall.h
new file mode 100644
index 0000000000..9950d940d6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionLowPwrPstateInstall.h
@@ -0,0 +1,89 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Low Power Pstate for PROCHOT_L Throttling.
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 53056 $   @e \$Date: 2011-05-13 23:48:24 -0600 (Fri, 13 May 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_LOW_PWR_PSTATE_INSTALL_H_
+#define _OPTION_LOW_PWR_PSTATE_INSTALL_H_
+
+#include "cpuLowPwrPstate.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT_FEAT
+#define F15_OR_LOW_PWR_PSTATE_SUPPORT
+
+#if OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT == TRUE
+  #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+    // Family 15h
+    #ifdef OPTION_FAMILY15H
+      #if OPTION_FAMILY15H == TRUE
+        #if OPTION_FAMILY15H_OR == TRUE
+          #if (OPTION_G34_SOCKET_SUPPORT == TRUE) || (OPTION_C32_SOCKET_SUPPORT == TRUE)
+            extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureLowPwrPstate;
+            #undef OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT_FEAT
+            #define OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT_FEAT &CpuFeatureLowPwrPstate,
+            extern CONST LOW_PWR_PSTATE_FAMILY_SERVICES ROMDATA F15OrLowPwrPstateSupport;
+            #undef F15_OR_LOW_PWR_PSTATE_SUPPORT
+            #define F15_OR_LOW_PWR_PSTATE_SUPPORT {AMD_FAMILY_15_OR, &F15OrLowPwrPstateSupport},
+          #endif
+        #endif
+      #endif
+    #endif
+  #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA LowPwrPstateFamilyServiceArray[] =
+{
+  F15_OR_LOW_PWR_PSTATE_SUPPORT
+  {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA LowPwrPstateFamilyServiceTable =
+{
+  (sizeof (LowPwrPstateFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+  &LowPwrPstateFamilyServiceArray[0]
+};
+
+#endif  // _OPTION_LOW_PWR_PSTATE_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionMemory.h b/src/vendorcode/amd/agesa/f15/Include/OptionMemory.h
new file mode 100644
index 0000000000..2635dbc272
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionMemory.h
@@ -0,0 +1,358 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Memory option API.
+ *
+ * Contains structures and values used to control the Memory option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 55039 $   @e \$Date: 2011-06-15 23:31:36 -0600 (Wed, 15 Jun 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_MEMORY_H_
+#define _OPTION_MEMORY_H_
+
+/* Memory Includes */
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "ma.h"
+#include "mp.h"
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+#define MAX_FF_TYPES      6   ///< Maximum number of DDR Form factors (UDIMMs, RDIMMMs, SODIMMS) supported
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*
+* STANDARD MEMORY FEATURE FUNCTION POINTER
+*/
+
+typedef BOOLEAN OPTION_MEM_FEATURE_NB (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+typedef BOOLEAN MEM_TECH_FEAT (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+typedef UINT8 MEM_TABLE_FEAT (
+  IN OUT   MEM_TABLE_ALIAS **MTPtr
+  );
+
+#define MEM_FEAT_BLOCK_NB_STRUCT_VERSION  0x01
+
+/**
+ *  MEMORY FEATURE BLOCK - This structure serves as a vector table for standard
+ *  memory feature implementation functions.  It contains vectors for all of the
+ *  features that are supported by the various Northbridge devices supported by
+ *  AGESA.
+ */
+typedef struct _MEM_FEAT_BLOCK_NB {
+  UINT16              OptMemFeatVersion; ///< Version of memory feature block.
+  OPTION_MEM_FEATURE_NB  *OnlineSpare; ///< Online spare support.
+  OPTION_MEM_FEATURE_NB  *InterleaveBanks; ///< Bank (Chip select) interleaving support.
+  OPTION_MEM_FEATURE_NB  *UndoInterleaveBanks; ///< Undo Bank (Chip Select) interleaving.
+  OPTION_MEM_FEATURE_NB  *CheckInterleaveNodes; ///< Check for Node interleaving support.
+  OPTION_MEM_FEATURE_NB  *InterleaveNodes; ///< Node interleaving support.
+  OPTION_MEM_FEATURE_NB  *InterleaveChannels; ///< Channel interleaving support.
+  OPTION_MEM_FEATURE_NB  *InterleaveRegion;  ///< Interleave Region support.
+  OPTION_MEM_FEATURE_NB  *CheckEcc; ///< Check for ECC support.
+  OPTION_MEM_FEATURE_NB  *InitEcc; ///< ECC support.
+  OPTION_MEM_FEATURE_NB  *Training; ///< Choose the type of training (Parallel, standard or hardcoded).
+  OPTION_MEM_FEATURE_NB  *LvDdr3; ///< Low voltage DDR3 dimm support
+  OPTION_MEM_FEATURE_NB  *OnDimmThermal; ///< On-Dimm thermal management
+  MEM_TECH_FEAT  *DramInit; ///< Choose the type of Dram init (hardware based or software based).
+  OPTION_MEM_FEATURE_NB  *ExcludeDIMM; ///< Exclude a dimm.
+  OPTION_MEM_FEATURE_NB  *InitEarlySampleSupport; ///< Initialize early sample support.
+  OPTION_MEM_FEATURE_NB  *InitCPG; ///< Continuous pattern generation.
+  OPTION_MEM_FEATURE_NB  *InitHwRxEn; ///< Hardware Receiver Enable Training Initilization.
+} MEM_FEAT_BLOCK_NB;
+
+typedef AGESA_STATUS MEM_MAIN_FLOW_CONTROL (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+typedef BOOLEAN OPTION_MEM_FEATURE_MAIN (
+  IN MEM_MAIN_DATA_BLOCK *MMPtr
+  );
+
+typedef BOOLEAN MEM_NB_CONSTRUCTOR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *mmSharedPtr,     ///< Pointer to Memory scratchpad
+  IN       UINT8 NodeID
+  );
+
+typedef BOOLEAN MEM_TECH_CONSTRUCTOR (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   MEM_NB_BLOCK   *NBPtr
+  );
+
+typedef VOID MEM_INITIALIZER (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+ );
+
+typedef AGESA_STATUS MEM_PLATFORM_CFG (
+  IN struct _MEM_DATA_STRUCT *MemData,
+  IN UINT8 SocketID,
+  IN CH_DEF_STRUCT *CurrentChannel
+  );
+
+typedef BOOLEAN MEM_IDENDIMM_CONSTRUCTOR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+typedef VOID MEM_TECH_TRAINING_FEAT (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Pass
+  );
+
+typedef BOOLEAN MEM_RESUME_CONSTRUCTOR (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+typedef AGESA_STATUS MEM_PLAT_SPEC_CFG (
+  IN struct _MEM_DATA_STRUCT *MemData,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+typedef AGESA_STATUS MEM_FLOW_CFG (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemData
+  );
+
+#define MEM_FEAT_BLOCK_MAIN_STRUCT_VERSION  0x01
+
+/**
+ * MAIN FEATURE BLOCK - This structure serves as vector table for memory features
+ * that shared between all northbridge devices.
+ */
+typedef struct _MEM_FEAT_BLOCK_MAIN {
+  UINT16              OptMemFeatVersion; ///< Version of main feature block.
+  OPTION_MEM_FEATURE_MAIN *Training; ///< Training features.
+  OPTION_MEM_FEATURE_MAIN *ExcludeDIMM; ///< Exclude a dimm.
+  OPTION_MEM_FEATURE_MAIN *OnlineSpare; ///< On-line spare.
+  OPTION_MEM_FEATURE_MAIN *InterleaveNodes; ///< Node interleave.
+  OPTION_MEM_FEATURE_MAIN *InitEcc; ///< Initialize ECC on all nodes if they all support it.
+  OPTION_MEM_FEATURE_MAIN *MemClr; ///< Memory Clear.
+  OPTION_MEM_FEATURE_MAIN *MemDmi; ///< Memory DMI Support.
+  OPTION_MEM_FEATURE_MAIN *LvDDR3; ///< Low voltage DDR3 support.
+  OPTION_MEM_FEATURE_MAIN *UmaAllocation; ///< Uma Allocation.
+  OPTION_MEM_FEATURE_MAIN *MemSave; ///< Memory Context Save
+  OPTION_MEM_FEATURE_MAIN *MemRestore; ///< Memory Context Restore
+} MEM_FEAT_BLOCK_MAIN;
+
+#define MEM_NB_SUPPORT_STRUCT_VERSION  0x01
+#define MEM_TECH_FEAT_BLOCK_STRUCT_VERSION  0x01
+#define MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION  0x01
+#define MEM_TECH_LRDIMM_STRUCT_VERSION 0x01
+/**
+ *  MEMORY TECHNOLOGY FEATURE BLOCK - This structure serves as a vector table for standard
+ *  memory feature implementation functions.  It contains vectors for all of the
+ *  features that are supported by the various Technology features supported by
+ *  AGESA.
+ */
+typedef struct _MEM_TECH_FEAT_BLOCK {
+  UINT16  OptMemTechFeatVersion; ///< Version of memory Tech feature block.
+  MEM_TECH_FEAT *EnterHardwareTraining; ///<Enter HW WL Training
+  MEM_TECH_FEAT *SwWLTraining; ///<SW Write Levelization training
+  MEM_TECH_FEAT *HwBasedWLTrainingPart1; ///<HW based write levelization Training Part 1
+  MEM_TECH_FEAT *HwBasedDQSReceiverEnableTrainingPart1; ///<HW based DQS receiver Enabled Training Part 1
+  MEM_TECH_FEAT *HwBasedWLTrainingPart2; ///<HW based write levelization Training Part 2
+  MEM_TECH_FEAT *HwBasedDQSReceiverEnableTrainingPart2; ///<HW based DQS receiver Enabled Training Part 2
+  MEM_TECH_FEAT *TrainExitHwTrn; ///<Exit HW WL Training
+  MEM_TECH_FEAT *NonOptimizedSWDQSRecEnTrainingPart1; ///< Non-Optimized Software based receiver Enable Training part 1
+  MEM_TECH_FEAT *OptimizedSwDqsRecEnTrainingPart1; ///< Optimized Software based receiver Enable Training part 1
+  MEM_TECH_FEAT *NonOptimizedSRdWrPosTraining; ///< Non-Optimized Rd Wr Position training
+  MEM_TECH_FEAT *OptimizedSRdWrPosTraining; ///< Optimized Rd Wr Position training
+  MEM_TECH_FEAT *MaxRdLatencyTraining; ///< MaxReadLatency Training
+  MEM_TECH_FEAT *RdPosTraining; ///< HW Rx En Seed Training
+  MEM_TECH_FEAT *RdDqs__Training; ///< Read DQS Training
+} MEM_TECH_FEAT_BLOCK;
+
+/**
+ *  MEMORY TECHNOLOGY LRDIMM BLOCK - This structure serves as a vector table for standard
+ *  memory feature implementation functions.  It contains vectors for all of the
+ *  features that are supported by the various LRDIMM features supported by
+ *  AGESA.
+ */
+typedef struct _MEM_TECH_LRDIMM {
+  UINT16  OptMemTechLrdimmVersion; ///< Version of memory Tech feature block.
+  MEM_TECH_FEAT *MemTInitializeLrdimm; ///< LRDIMM initialization
+} MEM_TECH_LRDIMM;
+/**
+ * MEMORY NORTHBRIDGE SUPPORT STRUCT - This structure groups the Northbridge dependent
+ * options together in a list to provide a single access point for all code to use
+ * and to ensure that everything corresponding to the same NB type is grouped together.
+ *
+ * The Technology Block pointers are not included in this structure because DRAM technology
+ * needs to be decoupled from the northbridge type.
+ *
+ */
+typedef struct _MEM_NB_SUPPORT {
+  UINT16              MemNBSupportVersion; ///< Version of northbridge support.
+  MEM_NB_CONSTRUCTOR  *MemConstructNBBlock; ///< NorthBridge block constructor.
+  MEM_INITIALIZER     *MemNInitDefaults; ///< Default value initialization for MEM_DATA_STRUCT.
+  MEM_FEAT_BLOCK_NB      *MemFeatBlock; ///< Memory feature block.
+  MEM_RESUME_CONSTRUCTOR *MemS3ResumeConstructNBBlock; ///< S3 memory initialization northbridge block constructor.
+  MEM_IDENDIMM_CONSTRUCTOR *MemIdentifyDimmConstruct; ///< Constructor for address to dimm identification.
+} MEM_NB_SUPPORT;
+
+/*
+ *  MEMORY Non-Training FEATURES - This structure serves as a vector table for standard
+ *  memory non-training feature implementation functions.  It contains vectors for all of the
+ *  features that are supported by the various Technology devices supported by
+ *  AGESA.
+ */
+
+/**
+ * MAIN TRAINING SEQUENCE LIST - This structure serves as vector table for memory features
+ * that shared between all northbridge devices.
+ */
+typedef struct _MEM_FEAT_TRAIN_SEQ {
+  UINT16              OptMemTrainingSequenceListVersion; ///< Version of main feature block.
+  OPTION_MEM_FEATURE_NB *TrainingSequence; ///< Training Sequence function.
+  OPTION_MEM_FEATURE_NB *TrainingSequenceEnabled; ///< Enable function.
+  MEM_TECH_FEAT_BLOCK      *MemTechFeatBlock; ///< Memory feature block.
+} MEM_FEAT_TRAIN_SEQ;
+
+/**
+ * PLATFORM SPECIFIC CONFIGURATION BLOCK - This structure groups various PSC table
+ * entries which are used by PSC engine
+ */
+typedef struct _MEM_PSC_TABLE_BLOCK {
+  PSC_TBL_ENTRY **TblEntryOfMaxFreq; ///< Table entry of MaxFreq.
+  PSC_TBL_ENTRY **TblEntryOfDramTerm; ///< Table entry of Dram Term.
+  PSC_TBL_ENTRY **TblEntryOfODTPattern; ///< Table entry of ODT Pattern.
+  PSC_TBL_ENTRY **TblEntryOfSAO; ///< Table entry of Slow access mode, AddrTmg and ODC..
+  PSC_TBL_ENTRY **TblEntryOfMR0WR; ///< Table entry of MR0[WR].
+  PSC_TBL_ENTRY **TblEntryOfMR0CL; ///< Table entry of MR0[CL].
+  PSC_TBL_ENTRY **TblEntryOfRC2IBT; ///< Table entry of RC2 IBT.
+  PSC_TBL_ENTRY **TblEntryOfRC10OpSpeed; ///< Table entry of RC10[operating speed].
+  PSC_TBL_ENTRY **TblEntryOfLRIBT;///< Table entry of LRDIMM IBT
+  PSC_TBL_ENTRY **TblEntryOfLRNPR; ///< Table entry of LRDIMM F0RC13[NumPhysicalRanks].
+  PSC_TBL_ENTRY **TblEntryOfLRNLR; ///< Table entry of LRDIMM F0RC13[NumLogicalRanks].
+  PSC_TBL_ENTRY **TblEntryOfGen; ///< Table entry of CLKDis map and CKE, ODT as well as ChipSel tri-state map.
+  PSC_TBL_ENTRY **TblEntryOfS__; ///< Table entry of training configs
+  PSC_TBL_ENTRY **TblEntryOfWLSeed; ///< Table entry of WL seed
+  PSC_TBL_ENTRY **TblEntryOfHWRxENSeed; ///< Table entry of HW RxEN seed
+} MEM_PSC_TABLE_BLOCK;
+
+typedef BOOLEAN MEM_PSC_FLOW (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/**
+ * PLATFORM SPECIFIC CONFIGURATION FLOW BLOCK - Pointers to the sub-engines of platform
+ * specific configuration.
+ */
+typedef struct _MEM_PSC_FLOW_BLOCK {
+  MEM_PSC_TABLE_BLOCK *EntryOfTables; ///<Entry of NB specific MEM_PSC_TABLE_BLOCK
+  MEM_PSC_FLOW *MaxFrequency; ///< Sub-engine which performs "Max Frequency" value extraction.
+  MEM_PSC_FLOW *DramTerm; ///< Sub-engine which performs "Dram Term" value extraction.
+  MEM_PSC_FLOW *ODTPattern; ///< Sub-engine which performs "ODT Pattern" value extraction.
+  MEM_PSC_FLOW *SAO; ///< Sub-engine which performs "Slow access mode, AddrTmg and ODC" value extraction.
+  MEM_PSC_FLOW *MR0WrCL; ///< Sub-engine which performs "MR0[WR] and MR0[CL]" value extraction.
+  MEM_PSC_FLOW *RC2IBT; ///< Sub-engine "RC2 IBT" value extraction.
+  MEM_PSC_FLOW *RC10OpSpeed; ///< Sub-engine "RC10[operating speed]" value extraction.
+  MEM_PSC_FLOW *LRIBT; ///< Sub-engine "LRDIMM IBT" value extraction.
+  MEM_PSC_FLOW *LRNPR; ///< Sub-engine "LRDIMM F0RC13[NumPhysicalRanks]" value extraction.
+  MEM_PSC_FLOW *LRNLR; ///< Sub-engine "LRDIMM F0RC13[NumLogicalRanks]" value extraction.
+  MEM_PSC_FLOW *S__; ///< Sub-engine which performs training configuration  checking
+  MEM_PSC_FLOW *TrainingSeedVal; ///< Sub-engine for WL and HW RxEn pass1 seed value extraction
+} MEM_PSC_FLOW_BLOCK;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+/* Feature Default Return */
+BOOLEAN MemFDefRet (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN MemMDefRet (
+  IN MEM_MAIN_DATA_BLOCK *MMPtr
+  );
+
+BOOLEAN MemMDefRetFalse (
+  IN   MEM_MAIN_DATA_BLOCK *MMPtr
+  );
+
+/* Table Feature Default Return */
+UINT8 MemFTableDefRet (
+  IN OUT   MEM_TABLE_ALIAS **MTPtr
+  );
+/* S3 Feature Default Return */
+BOOLEAN MemFS3DefConstructorRet (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+BOOLEAN MemNIdentifyDimmConstructorRetDef (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+BOOLEAN
+MemProcessConditionalOverrides (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 PsoAction,
+  IN       UINT8 Dimm
+   );
+
+#endif  // _OPTION_MEMORY_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionMemoryInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionMemoryInstall.h
new file mode 100644
index 0000000000..24c1ae8926
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionMemoryInstall.h
@@ -0,0 +1,3778 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Memory
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 56315 $   @e \$Date: 2011-07-11 15:59:14 -0600 (Mon, 11 Jul 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_MEMORY_INSTALL_H_
+#define _OPTION_MEMORY_INSTALL_H_
+
+/* Memory Includes */
+#include "OptionMemory.h"
+
+/*-------------------------------------------------------------------------------
+ *  This option file is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+
+/*----------------------------------------------------------------------------------
+ * FEATURE BLOCK FUNCTIONS
+ *
+ *  This section defines function names that depend upon options that are selected
+ *  in the platform solution install file.
+ */
+BOOLEAN MemFDefRet (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  return FALSE;
+}
+
+BOOLEAN MemMDefRet (
+  IN   MEM_MAIN_DATA_BLOCK *MMPtr
+  )
+{
+  return TRUE;
+}
+
+BOOLEAN MemMDefRetFalse (
+  IN   MEM_MAIN_DATA_BLOCK *MMPtr
+  )
+{
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for dimm identification translator
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in,out]   NodeID   - ID of current node to construct
+ *     @return          TRUE     - This is the correct constructor for the targeted node.
+ *     @return          FALSE    - This isn't the correct constructor for the targeted node.
+ */
+BOOLEAN MemNIdentifyDimmConstructorRetDef (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  return FALSE;
+}
+/*----------------------------------------------------------------------------------
+ * TABLE FEATURE BLOCK FUNCTIONS
+ *
+ *  This section defines function names that depend upon options that are selected
+ *  in the platform solution install file.
+ */
+UINT8 MemFTableDefRet (
+  IN OUT   MEM_TABLE_ALIAS **MTPtr
+  )
+{
+  return 0;
+}
+/*----------------------------------------------------------------------------------
+ * FEATURE S3 BLOCK FUNCTIONS
+ *
+ *  This section defines function names that depend upon options that are selected
+ *  in the platform solution install file.
+ */
+BOOLEAN MemFS3DefConstructorRet (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  return TRUE;
+}
+
+#if (OPTION_MEMCTLR_DR == TRUE)
+  #if ((AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE))
+    #if (OPTION_S3_MEM_SUPPORT == TRUE)
+      extern MEM_RESUME_CONSTRUCTOR MemS3ResumeConstructNBBlockDr;
+      #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_DR MemS3ResumeConstructNBBlockDr
+    #else
+      #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_DR MemFS3DefConstructorRet
+    #endif
+  #else
+    #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_DR MemFS3DefConstructorRet
+  #endif
+  #if (AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE)
+    extern MEM_IDENDIMM_CONSTRUCTOR MemNIdentifyDimmConstructorDr;
+    #define MEM_IDENDIMM_DR MemNIdentifyDimmConstructorDr
+  #else
+    #define MEM_IDENDIMM_DR MemNIdentifyDimmConstructorRetDef
+  #endif
+#endif
+
+#if (OPTION_MEMCTLR_DA == TRUE  || OPTION_MEMCTLR_Ni == TRUE || OPTION_MEMCTLR_RB == TRUE || OPTION_MEMCTLR_PH == TRUE)
+  #if ((AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE))
+    #if (OPTION_S3_MEM_SUPPORT == TRUE)
+      #if (OPTION_MEMCTLR_Ni == TRUE)
+        extern MEM_RESUME_CONSTRUCTOR MemS3ResumeConstructNBBlockNi;
+        #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_Ni MemS3ResumeConstructNBBlockNi
+      #else
+        #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_Ni MemFS3DefConstructorRet
+      #endif
+      #if (OPTION_MEMCTLR_DA == TRUE)
+        extern MEM_RESUME_CONSTRUCTOR MemS3ResumeConstructNBBlockDA;
+        #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_DA MemS3ResumeConstructNBBlockDA
+      #else
+        #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_DA MemFS3DefConstructorRet
+      #endif
+      #if (OPTION_MEMCTLR_PH == TRUE)
+        extern MEM_RESUME_CONSTRUCTOR MemS3ResumeConstructNBBlockPh;
+        #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_PH MemS3ResumeConstructNBBlockPh
+      #else
+        #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_PH MemFS3DefConstructorRet
+      #endif
+      #if (OPTION_MEMCTLR_RB == TRUE)
+        extern MEM_RESUME_CONSTRUCTOR MemS3ResumeConstructNBBlockRb;
+        #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_RB MemS3ResumeConstructNBBlockRb
+      #else
+        #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_RB MemFS3DefConstructorRet
+      #endif
+    #endif
+  #else
+    #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_DA MemFS3DefConstructorRet
+    #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_Ni MemFS3DefConstructorRet
+    #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_RB MemFS3DefConstructorRet
+    #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_PH MemFS3DefConstructorRet
+  #endif
+  #if (AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE)
+    extern MEM_IDENDIMM_CONSTRUCTOR MemNIdentifyDimmConstructorDA;
+    #define MEM_IDENDIMM_DA MemNIdentifyDimmConstructorDA
+    extern MEM_IDENDIMM_CONSTRUCTOR MemNIdentifyDimmConstructorRb;
+    #define MEM_IDENDIMM_RB MemNIdentifyDimmConstructorRb
+    extern MEM_IDENDIMM_CONSTRUCTOR MemNIdentifyDimmConstructorPh;
+    #define MEM_IDENDIMM_PH MemNIdentifyDimmConstructorPh
+  #else
+    #define MEM_IDENDIMM_DA MemNIdentifyDimmConstructorRetDef
+    #define MEM_IDENDIMM_RB MemNIdentifyDimmConstructorRetDef
+    #define MEM_IDENDIMM_PH MemNIdentifyDimmConstructorRetDef
+  #endif
+#endif
+
+#if (OPTION_MEMCTLR_OR == TRUE)
+  #if ((AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE))
+    #if (OPTION_S3_MEM_SUPPORT == TRUE)
+      extern MEM_RESUME_CONSTRUCTOR MemS3ResumeConstructNBBlockOr;
+      #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_OR MemS3ResumeConstructNBBlockOr
+    #else
+      #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_OR MemFS3DefConstructorRet
+    #endif
+  #else
+    #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_OR MemFS3DefConstructorRet
+  #endif
+  #if (AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE)
+    extern MEM_IDENDIMM_CONSTRUCTOR MemNIdentifyDimmConstructorOr;
+    #define MEM_IDENDIMM_OR MemNIdentifyDimmConstructorOr
+  #else
+    #define MEM_IDENDIMM_OR MemNIdentifyDimmConstructorRetDef
+  #endif
+#endif
+
+#if (OPTION_MEMCTLR_HY == TRUE)
+  #if ((AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE))
+    #if (OPTION_S3_MEM_SUPPORT == TRUE)
+      extern MEM_RESUME_CONSTRUCTOR MemS3ResumeConstructNBBlockHy;
+      #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_HY MemS3ResumeConstructNBBlockHy
+    #else
+      #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_HY MemFS3DefConstructorRet
+    #endif
+  #else
+    #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_HY MemFS3DefConstructorRet
+  #endif
+  #if (AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE)
+    extern MEM_IDENDIMM_CONSTRUCTOR MemNIdentifyDimmConstructorHy;
+    #define MEM_IDENDIMM_HY MemNIdentifyDimmConstructorHy
+  #else
+    #define MEM_IDENDIMM_HY MemNIdentifyDimmConstructorRetDef
+  #endif
+#endif
+
+#if (OPTION_MEMCTLR_C32 == TRUE)
+  #if ((AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE))
+    #if (OPTION_S3_MEM_SUPPORT == TRUE)
+      extern MEM_RESUME_CONSTRUCTOR MemS3ResumeConstructNBBlockC32;
+      #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_C32 MemS3ResumeConstructNBBlockC32
+    #else
+      #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_C32 MemFS3DefConstructorRet
+    #endif
+  #else
+    #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_C32 MemFS3DefConstructorRet
+  #endif
+  #if (AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE)
+    extern MEM_IDENDIMM_CONSTRUCTOR MemNIdentifyDimmConstructorC32;
+    #define MEM_IDENDIMM_C32 MemNIdentifyDimmConstructorC32
+  #else
+    #define MEM_IDENDIMM_C32 MemNIdentifyDimmConstructorRetDef
+  #endif
+#endif
+
+/*----------------------------------------------------------------------------------
+ * NORTHBRIDGE BLOCK CONSTRUCTOR AND INITIALIZER FUNCTION DEFAULT ASSIGNMENTS
+ *
+ *----------------------------------------------------------------------------------
+*/
+#define MEM_NB_SUPPORT_DR
+#define MEM_NB_SUPPORT_RB
+#define MEM_NB_SUPPORT_DA
+#define MEM_NB_SUPPORT_Ni
+#define MEM_NB_SUPPORT_PH
+#define MEM_NB_SUPPORT_HY
+#define MEM_NB_SUPPORT_OR
+#define MEM_NB_SUPPORT_C32
+#define MEM_NB_SUPPORT_END { MEM_NB_SUPPORT_STRUCT_VERSION, 0, 0, 0, 0, 0 }
+
+#if (AGESA_ENTRY_INIT_POST == TRUE)
+  /*----------------------------------------------------------------------------------
+   * FLOW CONTROL FUNCTION
+   *
+   *  This section selects the function that controls the memory initialization sequence
+   *  based upon the number of processor families that the BIOS will support.
+   */
+  extern MEM_FLOW_CFG MemMFlowDef;
+  extern OPTION_MEM_FEATURE_MAIN MemMStandardTraining;
+
+
+  #if (OPTION_MEMCTLR_DR == TRUE)
+    extern MEM_FLOW_CFG MemMFlowDr;
+    #define MEM_MAIN_FLOW_CONTROL_PTR_Dr MemMFlowDr,
+  #else
+    #define MEM_MAIN_FLOW_CONTROL_PTR_Dr MemMFlowDef,
+  #endif
+  #if (OPTION_MEMCTLR_DA == TRUE)
+    extern MEM_FLOW_CFG MemMFlowDA;
+    #define MEM_MAIN_FLOW_CONTROL_PTR_DA MemMFlowDA,
+  #else
+    #define MEM_MAIN_FLOW_CONTROL_PTR_DA MemMFlowDef,
+  #endif
+  #if (OPTION_MEMCTLR_HY == TRUE)
+    extern MEM_FLOW_CFG MemMFlowHy;
+    #define MEM_MAIN_FLOW_CONTROL_PTR_Hy MemMFlowHy,
+  #else
+    #define MEM_MAIN_FLOW_CONTROL_PTR_Hy MemMFlowDef,
+  #endif
+  #if (OPTION_MEMCTLR_OR == TRUE)
+    extern MEM_FLOW_CFG MemMFlowOr;
+    #define MEM_MAIN_FLOW_CONTROL_PTR_OR MemMFlowOr,
+  #else
+    #define MEM_MAIN_FLOW_CONTROL_PTR_OR MemMFlowDef,
+  #endif
+  #if (OPTION_MEMCTLR_C32 == TRUE)
+    extern MEM_FLOW_CFG MemMFlowC32;
+    #define MEM_MAIN_FLOW_CONTROL_PTR_C32 MemMFlowC32,
+  #else
+    #define MEM_MAIN_FLOW_CONTROL_PTR_C32 MemMFlowDef,
+  #endif
+  #if (OPTION_MEMCTLR_Ni == TRUE)
+    extern MEM_FLOW_CFG MemMFlowDA;
+    #define MEM_MAIN_FLOW_CONTROL_PTR_Ni MemMFlowDA,
+  #else
+    #define MEM_MAIN_FLOW_CONTROL_PTR_Ni MemMFlowDef,
+  #endif
+  #if (OPTION_MEMCTLR_RB == TRUE)
+    extern MEM_FLOW_CFG MemMFlowRb;
+    #define MEM_MAIN_FLOW_CONTROL_PTR_RB MemMFlowRb,
+  #else
+    #define MEM_MAIN_FLOW_CONTROL_PTR_RB MemMFlowDef,
+  #endif
+  #if (OPTION_MEMCTLR_PH == TRUE)
+    extern MEM_FLOW_CFG MemMFlowPh;
+    #define MEM_MAIN_FLOW_CONTROL_PTR_PH MemMFlowPh,
+  #else
+    #define MEM_MAIN_FLOW_CONTROL_PTR_PH MemMFlowDef,
+  #endif
+
+  MEM_FLOW_CFG* memFlowControlInstalled[] = {
+    MEM_MAIN_FLOW_CONTROL_PTR_Dr
+    MEM_MAIN_FLOW_CONTROL_PTR_DA
+    MEM_MAIN_FLOW_CONTROL_PTR_RB
+    MEM_MAIN_FLOW_CONTROL_PTR_PH
+    MEM_MAIN_FLOW_CONTROL_PTR_Hy
+    MEM_MAIN_FLOW_CONTROL_PTR_OR
+    MEM_MAIN_FLOW_CONTROL_PTR_C32
+    MEM_MAIN_FLOW_CONTROL_PTR_Ni
+    NULL
+  };
+
+  #if (OPTION_ONLINE_SPARE == TRUE)
+    extern OPTION_MEM_FEATURE_MAIN MemMOnlineSpare;
+    #define MEM_MAIN_FEATURE_ONLINE_SPARE  MemMOnlineSpare
+    extern OPTION_MEM_FEATURE_NB MemFOnlineSpare;
+    #define MEM_FEATURE_ONLINE_SPARE  MemFOnlineSpare
+  #else
+    #define MEM_MAIN_FEATURE_ONLINE_SPARE  MemMDefRet
+    #define MEM_FEATURE_ONLINE_SPARE  MemFDefRet
+  #endif
+
+  #if (OPTION_MEM_RESTORE == TRUE)
+    extern OPTION_MEM_FEATURE_MAIN MemMContextSave;
+    extern OPTION_MEM_FEATURE_MAIN MemMContextRestore;
+    #define MEM_MAIN_FEATURE_MEM_SAVE     MemMContextSave
+    #define MEM_MAIN_FEATURE_MEM_RESTORE  MemMContextRestore
+  #else
+    #define MEM_MAIN_FEATURE_MEM_SAVE     MemMDefRet
+    #define MEM_MAIN_FEATURE_MEM_RESTORE  MemMDefRetFalse
+  #endif
+
+  #if (OPTION_BANK_INTERLEAVE == TRUE)
+    extern OPTION_MEM_FEATURE_NB MemFInterleaveBanks;
+    #define MEM_FEATURE_BANK_INTERLEAVE  MemFInterleaveBanks
+    extern OPTION_MEM_FEATURE_NB MemFUndoInterleaveBanks;
+    #define MEM_FEATURE_UNDO_BANK_INTERLEAVE MemFUndoInterleaveBanks
+  #else
+    #define MEM_FEATURE_BANK_INTERLEAVE  MemFDefRet
+    #define MEM_FEATURE_UNDO_BANK_INTERLEAVE MemFDefRet
+  #endif
+
+  #if (OPTION_NODE_INTERLEAVE == TRUE)
+    extern OPTION_MEM_FEATURE_MAIN MemMInterleaveNodes;
+    #define MEM_MAIN_FEATURE_NODE_INTERLEAVE  MemMInterleaveNodes
+    extern OPTION_MEM_FEATURE_NB MemFCheckInterleaveNodes;
+    extern OPTION_MEM_FEATURE_NB MemFInterleaveNodes;
+    #define MEM_FEATURE_NODE_INTERLEAVE_CHECK  MemFCheckInterleaveNodes
+    #define MEM_FEATURE_NODE_INTERLEAVE  MemFInterleaveNodes
+  #else
+    #define MEM_FEATURE_NODE_INTERLEAVE_CHECK  MemFDefRet
+    #define MEM_FEATURE_NODE_INTERLEAVE  MemFDefRet
+    #define MEM_MAIN_FEATURE_NODE_INTERLEAVE  MemMDefRet
+  #endif
+
+  #if (OPTION_DCT_INTERLEAVE == TRUE)
+    extern OPTION_MEM_FEATURE_NB MemFInterleaveChannels;
+    #define MEM_FEATURE_CHANNEL_INTERLEAVE  MemFInterleaveChannels
+  #else
+    #define MEM_FEATURE_CHANNEL_INTERLEAVE  MemFDefRet
+  #endif
+
+  #if (OPTION_ECC == TRUE)
+    extern OPTION_MEM_FEATURE_MAIN MemMEcc;
+    #define MEM_MAIN_FEATURE_ECC  MemMEcc
+    extern OPTION_MEM_FEATURE_NB MemFCheckECC;
+    extern OPTION_MEM_FEATURE_NB MemFInitECC;
+    #define MEM_FEATURE_CK_ECC   MemFCheckECC
+    #define MEM_FEATURE_ECC   MemFInitECC
+    #define MEM_FEATURE_ECCX8  MemMDefRet
+  #else
+    #define MEM_MAIN_FEATURE_ECC  MemMDefRet
+    #define MEM_FEATURE_CK_ECC   MemFDefRet
+    #define MEM_FEATURE_ECC   MemFDefRet
+    #define MEM_FEATURE_ECCX8  MemMDefRet
+  #endif
+
+    #define MEM_FEATURE_EMP   MemFDefRet
+
+  extern OPTION_MEM_FEATURE_MAIN MemMMctMemClr;
+  #define MEM_MAIN_FEATURE_MEM_CLEAR  MemMMctMemClr
+
+  #if (OPTION_DMI == TRUE)
+    #if (OPTION_DDR3 == TRUE)
+      extern OPTION_MEM_FEATURE_MAIN MemFDMISupport3;
+      #define MEM_MAIN_FEATURE_MEM_DMI MemFDMISupport3
+    #else
+      extern OPTION_MEM_FEATURE_MAIN MemFDMISupport2;
+      #define MEM_MAIN_FEATURE_MEM_DMI MemFDMISupport2
+    #endif
+  #else
+    #define MEM_MAIN_FEATURE_MEM_DMI MemMDefRet
+  #endif
+
+  #if (OPTION_DDR3 == TRUE)
+    extern OPTION_MEM_FEATURE_NB MemFOnDimmThermal;
+    extern OPTION_MEM_FEATURE_MAIN MemMLvDdr3;
+    extern OPTION_MEM_FEATURE_NB MemFLvDdr3;
+    #define MEM_FEATURE_ONDIMMTHERMAL MemFOnDimmThermal
+    #define MEM_MAIN_FEATURE_LVDDR3 MemMLvDdr3
+    #define MEM_FEATURE_LVDDR3 MemFLvDdr3
+  #else
+    #define MEM_FEATURE_ONDIMMTHERMAL MemFDefRet
+    #define MEM_MAIN_FEATURE_LVDDR3 MemMDefRet
+    #define MEM_FEATURE_LVDDR3 MemFDefRet
+  #endif
+
+  extern OPTION_MEM_FEATURE_NB MemFInterleaveRegion;
+  #define MEM_FEATURE_REGION_INTERLEAVE    MemFInterleaveRegion
+
+  extern OPTION_MEM_FEATURE_MAIN MemMUmaAlloc;
+  #define MEM_MAIN_FEATURE_UMAALLOC   MemMUmaAlloc
+
+  #if (OPTION_PARALLEL_TRAINING == TRUE)
+    extern OPTION_MEM_FEATURE_MAIN MemMParallelTraining;
+    #define MEM_MAIN_FEATURE_TRAINING  MemMParallelTraining
+  #else
+    #define MEM_MAIN_FEATURE_TRAINING  MemMStandardTraining
+  #endif
+
+  #if (OPTION_DIMM_EXCLUDE == TRUE)
+    extern OPTION_MEM_FEATURE_MAIN MemMRASExcludeDIMM;
+    #define MEM_MAIN_FEATURE_DIMM_EXCLUDE  MemMRASExcludeDIMM
+    extern OPTION_MEM_FEATURE_NB MemFRASExcludeDIMM;
+    #define MEM_FEATURE_DIMM_EXCLUDE  MemFRASExcludeDIMM
+  #else
+    #define MEM_FEATURE_DIMM_EXCLUDE  MemFDefRet
+    #define MEM_MAIN_FEATURE_DIMM_EXCLUDE  MemMDefRet
+  #endif
+
+  /*----------------------------------------------------------------------------------
+   * TECHNOLOGY BLOCK CONSTRUCTOR FUNCTION ASSIGNMENTS
+   *
+   *----------------------------------------------------------------------------------
+  */
+  #if OPTION_DDR2 == TRUE
+    extern MEM_TECH_CONSTRUCTOR MemConstructTechBlock2;
+    #define MEM_TECH_CONSTRUCTOR_DDR2 MemConstructTechBlock2,
+    #if (OPTION_HW_DRAM_INIT == TRUE)
+      extern MEM_TECH_FEAT MemTDramInitHw;
+      #define MEM_TECH_FEATURE_HW_DRAMINIT  MemTDramInitHw
+    #else
+      #define MEM_TECH_FEATURE_HW_DRAMINIT  MemTFeatDef
+    #endif
+    #if (OPTION_SW_DRAM_INIT == TRUE)
+      #define MEM_TECH_FEATURE_SW_DRAMINIT  MemTFeatDef
+    #else
+      #define MEM_TECH_FEATURE_SW_DRAMINIT  MemTFeatDef
+    #endif
+  #else
+    #define MEM_TECH_CONSTRUCTOR_DDR2
+  #endif
+  #if OPTION_DDR3 == TRUE
+    extern MEM_TECH_CONSTRUCTOR MemConstructTechBlock3;
+    #define MEM_TECH_CONSTRUCTOR_DDR3 MemConstructTechBlock3,
+    #if (OPTION_HW_DRAM_INIT == TRUE)
+      extern MEM_TECH_FEAT MemTDramInitHw;
+      #define MEM_TECH_FEATURE_HW_DRAMINIT  MemTDramInitHw
+    #else
+      #define  MEM_TECH_FEATURE_HW_DRAMINIT MemTFeatDef
+    #endif
+    #if (OPTION_SW_DRAM_INIT == TRUE)
+      #define MEM_TECH_FEATURE_SW_DRAMINIT  MemTDramInitSw3
+    #else
+      #define MEM_TECH_FEATURE_SW_DRAMINIT  MemTFeatDef
+    #endif
+  #else
+    #define MEM_TECH_CONSTRUCTOR_DDR3
+  #endif
+
+
+  /*---------------------------------------------------------------------------------------------------
+   * FEATURE BLOCKS
+   *
+   *  This section instantiates a feature block structure for each memory controller installed
+   *  by the platform solution install file.
+   *---------------------------------------------------------------------------------------------------
+   */
+
+  #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+    extern OPTION_MEM_FEATURE_NB MemNInitDqsTrainRcvrEnHwNb;
+  #endif
+  extern OPTION_MEM_FEATURE_NB MemFStandardTraining;
+
+  /*---------------------------------------------------------------------------------------------------
+   * DEERHOUND FEATURE BLOCK
+   *---------------------------------------------------------------------------------------------------
+   */
+  #if (OPTION_MEMCTLR_DR == TRUE)
+    #if OPTION_DDR2
+      #undef MEM_TECH_FEATURE_DRAMINIT
+      #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_HW_DRAMINIT
+    #endif
+    #if OPTION_DDR3
+      #undef MEM_TECH_FEATURE_DRAMINIT
+      #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_SW_DRAMINIT
+    #endif
+
+    #undef MEM_TECH_FEATURE_CPG
+    #define MEM_TECH_FEATURE_CPG    MemFDefRet
+
+    #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+      #undef MEM_TECH_FEATURE_HWRXEN
+      #define MEM_TECH_FEATURE_HWRXEN    MemNInitDqsTrainRcvrEnHwNb
+    #else
+      extern OPTION_MEM_FEATURE_NB MemNDisableDqsTrainRcvrEnHwNb;
+      #undef MEM_TECH_FEATURE_HWRXEN
+      #define MEM_TECH_FEATURE_HWRXEN    MemNDisableDqsTrainRcvrEnHwNb
+    #endif
+
+    #undef MEM_MAIN_FEATURE_TRAINING
+    #undef MEM_FEATURE_TRAINING
+    #define MEM_MAIN_FEATURE_TRAINING  MemMStandardTraining
+    #define MEM_FEATURE_TRAINING  MemFStandardTraining
+
+    MEM_FEAT_BLOCK_NB  MemFeatBlockDr = {
+      MEM_FEAT_BLOCK_NB_STRUCT_VERSION,
+      MEM_FEATURE_ONLINE_SPARE,
+      MEM_FEATURE_BANK_INTERLEAVE,
+      MEM_FEATURE_UNDO_BANK_INTERLEAVE,
+      MEM_FEATURE_NODE_INTERLEAVE_CHECK,
+      MEM_FEATURE_NODE_INTERLEAVE,
+      MEM_FEATURE_CHANNEL_INTERLEAVE,
+      MemFDefRet,
+      MEM_FEATURE_CK_ECC,
+      MEM_FEATURE_ECC,
+      MEM_FEATURE_TRAINING,
+      MEM_FEATURE_LVDDR3,
+      MemFDefRet,
+      MEM_TECH_FEATURE_DRAMINIT,
+      MEM_FEATURE_DIMM_EXCLUDE,
+      MemFDefRet,
+      MEM_TECH_FEATURE_CPG,
+      MEM_TECH_FEATURE_HWRXEN
+    };
+
+    #undef MEM_NB_SUPPORT_DR
+    extern MEM_NB_CONSTRUCTOR MemConstructNBBlockDR;
+    extern MEM_INITIALIZER MemNInitDefaultsDR;
+
+
+    #define MEM_NB_SUPPORT_DR { MEM_NB_SUPPORT_STRUCT_VERSION, MemConstructNBBlockDR, MemNInitDefaultsDR, &MemFeatBlockDr, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_DR, MEM_IDENDIMM_DR },
+  #endif // OPTION_MEMCTRL_DR
+
+  /*---------------------------------------------------------------------------------------------------
+   * DASHOUND FEATURE BLOCK
+   *---------------------------------------------------------------------------------------------------
+   */
+  #if (OPTION_MEMCTLR_DA == TRUE || OPTION_MEMCTLR_Ni == TRUE || OPTION_MEMCTLR_RB == TRUE || OPTION_MEMCTLR_PH == TRUE)
+    #if OPTION_DDR2
+      #undef MEM_TECH_FEATURE_DRAMINIT
+      #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_HW_DRAMINIT
+    #endif
+    #if OPTION_DDR3
+      #undef MEM_TECH_FEATURE_DRAMINIT
+      #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_SW_DRAMINIT
+    #endif
+
+    #undef MEM_TECH_FEATURE_CPG
+    #define MEM_TECH_FEATURE_CPG    MemFDefRet
+
+    #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+      #undef MEM_TECH_FEATURE_HWRXEN
+      #define MEM_TECH_FEATURE_HWRXEN    MemNInitDqsTrainRcvrEnHwNb
+    #else
+      extern OPTION_MEM_FEATURE_NB MemNDisableDqsTrainRcvrEnHwNb;
+      #undef MEM_TECH_FEATURE_HWRXEN
+      #define MEM_TECH_FEATURE_HWRXEN    MemNDisableDqsTrainRcvrEnHwNb
+    #endif
+
+    #undef MEM_MAIN_FEATURE_TRAINING
+    #undef MEM_FEATURE_TRAINING
+    #define MEM_MAIN_FEATURE_TRAINING  MemMStandardTraining
+    #define MEM_FEATURE_TRAINING  MemFStandardTraining
+
+    #if (OPTION_MEMCTLR_Ni == TRUE)
+      MEM_FEAT_BLOCK_NB  MemFeatBlockNi = {
+        MEM_FEAT_BLOCK_NB_STRUCT_VERSION,
+        MemFDefRet,
+        MEM_FEATURE_BANK_INTERLEAVE,
+        MEM_FEATURE_UNDO_BANK_INTERLEAVE,
+        MemFDefRet,
+        MemFDefRet,
+        MEM_FEATURE_CHANNEL_INTERLEAVE,
+        MEM_FEATURE_REGION_INTERLEAVE,
+        MEM_FEATURE_CK_ECC,
+        MEM_FEATURE_ECC,
+        MEM_FEATURE_TRAINING,
+        MEM_FEATURE_LVDDR3,
+        MemFDefRet,
+        MEM_TECH_FEATURE_DRAMINIT,
+        MEM_FEATURE_DIMM_EXCLUDE,
+        MemFDefRet,
+        MEM_TECH_FEATURE_CPG,
+        MEM_TECH_FEATURE_HWRXEN
+      };
+
+      #undef MEM_NB_SUPPORT_Ni
+      extern MEM_NB_CONSTRUCTOR MemConstructNBBlockNi;
+      extern MEM_INITIALIZER MemNInitDefaultsNi;
+
+      #define MEM_NB_SUPPORT_Ni { MEM_NB_SUPPORT_STRUCT_VERSION, MemConstructNBBlockNi, MemNInitDefaultsNi, &MemFeatBlockNi, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_Ni, MEM_IDENDIMM_DA },
+    #endif
+
+    #if (OPTION_MEMCTLR_PH == TRUE)
+      MEM_FEAT_BLOCK_NB  MemFeatBlockPh = {
+        MEM_FEAT_BLOCK_NB_STRUCT_VERSION,
+        MemFDefRet,
+        MEM_FEATURE_BANK_INTERLEAVE,
+        MEM_FEATURE_UNDO_BANK_INTERLEAVE,
+        MemFDefRet,
+        MemFDefRet,
+        MEM_FEATURE_CHANNEL_INTERLEAVE,
+        MEM_FEATURE_REGION_INTERLEAVE,
+        MEM_FEATURE_CK_ECC,
+        MEM_FEATURE_ECC,
+        MEM_FEATURE_TRAINING,
+        MEM_FEATURE_LVDDR3,
+        MemFDefRet,
+        MEM_TECH_FEATURE_DRAMINIT,
+        MEM_FEATURE_DIMM_EXCLUDE,
+        MemFDefRet,
+        MEM_TECH_FEATURE_CPG,
+        MEM_TECH_FEATURE_HWRXEN
+      };
+
+      #undef MEM_NB_SUPPORT_PH
+      extern MEM_NB_CONSTRUCTOR MemConstructNBBlockPh;
+      extern MEM_INITIALIZER MemNInitDefaultsPh;
+
+      #define MEM_NB_SUPPORT_PH { MEM_NB_SUPPORT_STRUCT_VERSION, MemConstructNBBlockPh, MemNInitDefaultsPh, &MemFeatBlockPh, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_PH, MEM_IDENDIMM_PH },
+    #endif
+
+    #if (OPTION_MEMCTLR_RB == TRUE)
+      MEM_FEAT_BLOCK_NB  MemFeatBlockRb = {
+        MEM_FEAT_BLOCK_NB_STRUCT_VERSION,
+        MemFDefRet,
+        MEM_FEATURE_BANK_INTERLEAVE,
+        MEM_FEATURE_UNDO_BANK_INTERLEAVE,
+        MemFDefRet,
+        MemFDefRet,
+        MEM_FEATURE_CHANNEL_INTERLEAVE,
+        MEM_FEATURE_REGION_INTERLEAVE,
+        MEM_FEATURE_CK_ECC,
+        MEM_FEATURE_ECC,
+        MEM_FEATURE_TRAINING,
+        MEM_FEATURE_LVDDR3,
+        MemFDefRet,
+        MEM_TECH_FEATURE_DRAMINIT,
+        MEM_FEATURE_DIMM_EXCLUDE,
+        MemFDefRet,
+        MEM_TECH_FEATURE_CPG,
+        MEM_TECH_FEATURE_HWRXEN
+      };
+
+      #undef MEM_NB_SUPPORT_RB
+      extern MEM_NB_CONSTRUCTOR MemConstructNBBlockRb;
+      extern MEM_INITIALIZER MemNInitDefaultsRb;
+
+      #define MEM_NB_SUPPORT_RB { MEM_NB_SUPPORT_STRUCT_VERSION, MemConstructNBBlockRb, MemNInitDefaultsRb, &MemFeatBlockRb, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_RB, MEM_IDENDIMM_RB },
+    #endif
+
+    #if (OPTION_MEMCTLR_DA == TRUE)
+      MEM_FEAT_BLOCK_NB  MemFeatBlockDA = {
+        MEM_FEAT_BLOCK_NB_STRUCT_VERSION,
+        MemFDefRet,
+        MEM_FEATURE_BANK_INTERLEAVE,
+        MEM_FEATURE_UNDO_BANK_INTERLEAVE,
+        MemFDefRet,
+        MemFDefRet,
+        MEM_FEATURE_CHANNEL_INTERLEAVE,
+        MEM_FEATURE_REGION_INTERLEAVE,
+        MEM_FEATURE_CK_ECC,
+        MEM_FEATURE_ECC,
+        MEM_FEATURE_TRAINING,
+        MEM_FEATURE_LVDDR3,
+        MemFDefRet,
+        MEM_TECH_FEATURE_DRAMINIT,
+        MEM_FEATURE_DIMM_EXCLUDE,
+        MemFDefRet,
+        MEM_TECH_FEATURE_CPG,
+        MEM_TECH_FEATURE_HWRXEN
+      };
+
+      #undef MEM_NB_SUPPORT_DA
+      extern MEM_NB_CONSTRUCTOR MemConstructNBBlockDA;
+      extern MEM_INITIALIZER MemNInitDefaultsDA;
+
+      #define MEM_NB_SUPPORT_DA { MEM_NB_SUPPORT_STRUCT_VERSION, MemConstructNBBlockDA, MemNInitDefaultsDA, &MemFeatBlockDA, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_DA, MEM_IDENDIMM_DA },
+    #endif
+  #endif // OPTION_MEMCTRL_DA
+
+  /*---------------------------------------------------------------------------------------------------
+   * HYDRA FEATURE BLOCK
+   *---------------------------------------------------------------------------------------------------
+   */
+  #if (OPTION_MEMCTLR_HY == TRUE)
+    #if OPTION_DDR2
+      #undef MEM_TECH_FEATURE_DRAMINIT
+      #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_HW_DRAMINIT
+    #endif
+    #if OPTION_DDR3
+      #undef MEM_TECH_FEATURE_DRAMINIT
+      #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_SW_DRAMINIT
+    #endif
+
+    #undef MEM_TECH_FEATURE_CPG
+    #define MEM_TECH_FEATURE_CPG    MemFDefRet
+
+    #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+      #undef MEM_TECH_FEATURE_HWRXEN
+      #define MEM_TECH_FEATURE_HWRXEN    MemNInitDqsTrainRcvrEnHwNb
+    #else
+      extern OPTION_MEM_FEATURE_NB MemNDisableDqsTrainRcvrEnHwNb;
+      #undef MEM_TECH_FEATURE_HWRXEN
+      #define MEM_TECH_FEATURE_HWRXEN    MemNDisableDqsTrainRcvrEnHwNb
+    #endif
+
+
+    #undef MEM_MAIN_FEATURE_TRAINING
+    #undef MEM_FEATURE_TRAINING
+    #define MEM_MAIN_FEATURE_TRAINING  MemMStandardTraining
+    #define MEM_FEATURE_TRAINING  MemFStandardTraining
+
+    MEM_FEAT_BLOCK_NB  MemFeatBlockHy = {
+      MEM_FEAT_BLOCK_NB_STRUCT_VERSION,
+      MEM_FEATURE_ONLINE_SPARE,
+      MEM_FEATURE_BANK_INTERLEAVE,
+      MEM_FEATURE_UNDO_BANK_INTERLEAVE,
+      MEM_FEATURE_NODE_INTERLEAVE_CHECK,
+      MEM_FEATURE_NODE_INTERLEAVE,
+      MEM_FEATURE_CHANNEL_INTERLEAVE,
+      MemFDefRet,
+      MEM_FEATURE_CK_ECC,
+      MEM_FEATURE_ECC,
+      MEM_FEATURE_TRAINING,
+      MEM_FEATURE_LVDDR3,
+      MEM_FEATURE_ONDIMMTHERMAL,
+      MEM_TECH_FEATURE_DRAMINIT,
+      MEM_FEATURE_DIMM_EXCLUDE,
+      MemFDefRet,
+      MEM_TECH_FEATURE_CPG,
+      MEM_TECH_FEATURE_HWRXEN
+    };
+
+    #undef MEM_NB_SUPPORT_HY
+    extern MEM_NB_CONSTRUCTOR MemConstructNBBlockHY;
+    extern MEM_INITIALIZER MemNInitDefaultsHY;
+    #define MEM_NB_SUPPORT_HY { MEM_NB_SUPPORT_STRUCT_VERSION, MemConstructNBBlockHY, MemNInitDefaultsHY, &MemFeatBlockHy, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_HY, MEM_IDENDIMM_HY },
+  #endif // OPTION_MEMCTRL_HY
+  /*---------------------------------------------------------------------------------------------------
+   * OROCHI FEATURE BLOCK
+   *---------------------------------------------------------------------------------------------------
+   */
+  #if (OPTION_MEMCTLR_OR == TRUE)
+    #if OPTION_DDR2
+      #undef MEM_TECH_FEATURE_DRAMINIT
+      #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_HW_DRAMINIT
+    #endif
+    #if OPTION_DDR3
+      #undef MEM_MAIN_FEATURE_LVDDR3
+      extern OPTION_MEM_FEATURE_MAIN MemMLvDdr3PerformanceEnhPre;
+      #define MEM_MAIN_FEATURE_LVDDR3 MemMLvDdr3PerformanceEnhPre
+      #undef MEM_TECH_FEATURE_DRAMINIT
+      #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_SW_DRAMINIT
+    #endif
+
+    #if (OPTION_G34_SOCKET_SUPPORT || OPTION_C32_SOCKET_SUPPORT)
+      #undef MEM_FEATURE_REGION_INTERLEAVE
+      #define MEM_FEATURE_REGION_INTERLEAVE MemFDefRet
+    #endif
+
+    #if (OPTION_EARLY_SAMPLES == TRUE)
+      extern OPTION_MEM_FEATURE_NB MemNInitEarlySampleSupportOr;
+      #define MEM_EARLY_SAMPLE_SUPPORT    MemNInitEarlySampleSupportOr
+    #else
+      #define MEM_EARLY_SAMPLE_SUPPORT    MemFDefRet
+    #endif
+
+    #if (OPTION_CONTINOUS_PATTERN_GENERATION == TRUE)
+      extern OPTION_MEM_FEATURE_NB MemNInitCPGUnb;
+      #undef MEM_TECH_FEATURE_CPG
+      #define MEM_TECH_FEATURE_CPG    MemNInitCPGUnb
+    #else
+      #undef MEM_TECH_FEATURE_CPG
+      #define MEM_TECH_FEATURE_CPG    MemFDefRet
+    #endif
+
+    #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+      #undef MEM_TECH_FEATURE_HWRXEN
+      #define MEM_TECH_FEATURE_HWRXEN    MemNInitDqsTrainRcvrEnHwNb
+    #else
+      extern OPTION_MEM_FEATURE_NB MemNDisableDqsTrainRcvrEnHwNb;
+      #undef MEM_TECH_FEATURE_HWRXEN
+      #define MEM_TECH_FEATURE_HWRXEN    MemNDisableDqsTrainRcvrEnHwNb
+    #endif
+
+
+    #undef MEM_MAIN_FEATURE_TRAINING
+    #undef MEM_FEATURE_TRAINING
+    #define MEM_MAIN_FEATURE_TRAINING  MemMStandardTraining
+    #define MEM_FEATURE_TRAINING  MemFStandardTraining
+
+    MEM_FEAT_BLOCK_NB  MemFeatBlockOr = {
+      MEM_FEAT_BLOCK_NB_STRUCT_VERSION,
+      MEM_FEATURE_ONLINE_SPARE,
+      MEM_FEATURE_BANK_INTERLEAVE,
+      MEM_FEATURE_UNDO_BANK_INTERLEAVE,
+      MEM_FEATURE_NODE_INTERLEAVE_CHECK,
+      MEM_FEATURE_NODE_INTERLEAVE,
+      MEM_FEATURE_CHANNEL_INTERLEAVE,
+      MEM_FEATURE_REGION_INTERLEAVE,
+      MEM_FEATURE_CK_ECC,
+      MEM_FEATURE_ECC,
+      MEM_FEATURE_TRAINING,
+      MEM_FEATURE_LVDDR3,
+      MEM_FEATURE_ONDIMMTHERMAL,
+      MEM_TECH_FEATURE_DRAMINIT,
+      MEM_FEATURE_DIMM_EXCLUDE,
+      MEM_EARLY_SAMPLE_SUPPORT,
+      MEM_TECH_FEATURE_CPG,
+      MEM_TECH_FEATURE_HWRXEN
+    };
+
+    #undef MEM_NB_SUPPORT_OR
+    extern MEM_NB_CONSTRUCTOR MemConstructNBBlockOR;
+    extern MEM_INITIALIZER MemNInitDefaultsOR;
+    #define MEM_NB_SUPPORT_OR { MEM_NB_SUPPORT_STRUCT_VERSION, MemConstructNBBlockOR, MemNInitDefaultsOR, &MemFeatBlockOr, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_OR, MEM_IDENDIMM_OR },
+  #endif // OPTION_MEMCTRL_OR
+
+  /*---------------------------------------------------------------------------------------------------
+   * C32 FEATURE BLOCK
+   *---------------------------------------------------------------------------------------------------
+   */
+  #if (OPTION_MEMCTLR_C32 == TRUE)
+    #if OPTION_DDR2
+      #undef MEM_TECH_FEATURE_DRAMINIT
+      #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_HW_DRAMINIT
+    #endif
+    #if OPTION_DDR3
+      #undef MEM_TECH_FEATURE_DRAMINIT
+      #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_SW_DRAMINIT
+    #endif
+
+      #undef MEM_TECH_FEATURE_CPG
+      #define MEM_TECH_FEATURE_CPG    MemFDefRet
+
+    #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+      #undef MEM_TECH_FEATURE_HWRXEN
+      #define MEM_TECH_FEATURE_HWRXEN    MemNInitDqsTrainRcvrEnHwNb
+    #else
+      extern OPTION_MEM_FEATURE_NB MemNDisableDqsTrainRcvrEnHwNb;
+      #define MEM_TECH_FEATURE_HWRXEN    MemNDisableDqsTrainRcvrEnHwNb
+    #endif
+
+    #undef MEM_MAIN_FEATURE_TRAINING
+    #undef MEM_FEATURE_TRAINING
+    #if (OPTION_MEMCTLR_OR == TRUE)
+    #define MEM_MAIN_FEATURE_TRAINING  MemMStandardTraining
+    #else
+      #define MEM_MAIN_FEATURE_TRAINING  MemMStandardTraining
+    #endif
+    #define MEM_FEATURE_TRAINING  MemFStandardTraining
+
+    MEM_FEAT_BLOCK_NB  MemFeatBlockC32 = {
+      MEM_FEAT_BLOCK_NB_STRUCT_VERSION,
+      MEM_FEATURE_ONLINE_SPARE,
+      MEM_FEATURE_BANK_INTERLEAVE,
+      MEM_FEATURE_UNDO_BANK_INTERLEAVE,
+      MEM_FEATURE_NODE_INTERLEAVE_CHECK,
+      MEM_FEATURE_NODE_INTERLEAVE,
+      MEM_FEATURE_CHANNEL_INTERLEAVE,
+      MemFDefRet,
+      MEM_FEATURE_CK_ECC,
+      MEM_FEATURE_ECC,
+      MEM_FEATURE_TRAINING,
+      MEM_FEATURE_LVDDR3,
+      MEM_FEATURE_ONDIMMTHERMAL,
+      MEM_TECH_FEATURE_DRAMINIT,
+      MEM_FEATURE_DIMM_EXCLUDE,
+      MemFDefRet,
+      MEM_TECH_FEATURE_CPG,
+      MEM_TECH_FEATURE_HWRXEN
+    };
+
+    #undef MEM_NB_SUPPORT_C32
+    extern MEM_NB_CONSTRUCTOR MemConstructNBBlockC32;
+    extern MEM_INITIALIZER MemNInitDefaultsC32;
+    #define MEM_NB_SUPPORT_C32 { MEM_NB_SUPPORT_STRUCT_VERSION, MemConstructNBBlockC32, MemNInitDefaultsC32, &MemFeatBlockC32, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_C32, MEM_IDENDIMM_C32 },
+  #endif // OPTION_MEMCTRL_C32
+
+  /*---------------------------------------------------------------------------------------------------
+   * MAIN FEATURE BLOCK
+   *---------------------------------------------------------------------------------------------------
+   */
+  MEM_FEAT_BLOCK_MAIN MemFeatMain = {
+    MEM_FEAT_BLOCK_MAIN_STRUCT_VERSION,
+    MEM_MAIN_FEATURE_TRAINING,
+    MEM_MAIN_FEATURE_DIMM_EXCLUDE,
+    MEM_MAIN_FEATURE_ONLINE_SPARE,
+    MEM_MAIN_FEATURE_NODE_INTERLEAVE,
+    MEM_MAIN_FEATURE_ECC,
+    MEM_MAIN_FEATURE_MEM_CLEAR,
+    MEM_MAIN_FEATURE_MEM_DMI,
+    MEM_MAIN_FEATURE_LVDDR3,
+    MEM_MAIN_FEATURE_UMAALLOC,
+    MEM_MAIN_FEATURE_MEM_SAVE,
+    MEM_MAIN_FEATURE_MEM_RESTORE
+  };
+
+
+  /*---------------------------------------------------------------------------------------------------
+   * Technology Training SPECIFIC CONFIGURATION
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  #define MEM_TECH_TRAINING_FEAT_NULL_TERNMIATOR 0
+  #if OPTION_MEMCTLR_DR
+    extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceDr;
+    #if OPTION_DDR2
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR2 MemTFeatDef
+      #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2    MemTDqsTrainRcvrEnHwPass1
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2    MemTDqsTrainRcvrEnHwPass2
+        #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2  MemTTrainDQSEdgeDetect
+      #else
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2 MemTFeatDef
+        #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2    MemTTrainDQSEdgeDetect
+        #else
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2  MemTFeatDef
+    #endif
+    #endif
+      #if (OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2    MemTTrainRcvrEnSwPass1
+    #else
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+    #endif
+      #if (OPTION_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2    MemTFeatDef
+    #else
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+    #endif
+      #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2    MemTTrainDQSEdgeDetectSw
+    #else
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+    #endif
+      #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2    MemTFeatDef
+      #else
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+    #endif
+      #if (OPTION_MAX_RD_LAT_TRAINING == TRUE)
+        #define TECH_TRAIN_MAX_RD_LAT_DDR2    MemTTrainMaxLatency
+      #else
+        #define TECH_TRAIN_MAX_RD_LAT_DDR2 MemTFeatDef
+    #endif
+      #define TECH_TRAIN_DQS____DDR2    MemTFeatDef
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR2Dr = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR2,
+        TECH_TRAIN_SW_WL_DDR2,
+        TECH_TRAIN_HW_WL_P1_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_HW_WL_P2_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2,
+        TECH_TRAIN_EXIT_HW_TRN_DDR2,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_MAX_RD_LAT_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2,
+        TECH_TRAIN_DQS____DDR2
+      };
+      extern OPTION_MEM_FEATURE_NB MemNDQSTiming2Nb;
+      #define NB_TRAIN_FLOW_DDR2    MemNDQSTiming2Nb
+      extern OPTION_MEM_FEATURE_NB memNSequenceDDR2ServerNb;
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_DR { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, memNSequenceDDR2ServerNb, memNEnableTrainSequenceDr, &memTechTrainingFeatSequenceDDR2Dr },
+    #else
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #define TECH_TRAIN_MAX_RD_LAT_DDR2 MemTFeatDef
+      #define TECH_TRAIN_DQS____DDR2 MemTFeatDef
+      #define NB_TRAIN_FLOW_DDR2    (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_DR  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #endif
+    #if OPTION_DDR3
+      #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR3   MemTPreparePhyAssistedTraining
+      #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR3    MemTExitPhyAssistedTraining
+      #if (OPTION_HW_WRITE_LEV_TRAINING == TRUE)
+        #define TECH_TRAIN_HW_WL_P1_DDR3   MemTWriteLevelizationHw3Pass1
+        #define TECH_TRAIN_HW_WL_P2_DDR3   MemTWriteLevelizationHw3Pass2
+    #else
+        #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+        #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+    #endif
+      #if (OPTION_SW_WRITE_LEV_TRAINING == TRUE)
+        #define TECH_TRAIN_SW_WL_DDR3    MemTFeatDef
+    #else
+        #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+    #endif
+    #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3    MemTDqsTrainRcvrEnHwPass1
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3    MemTDqsTrainRcvrEnHwPass2
+        #if (OPTION_HW_DQS_REC_EN_SEED_TRAINING == TRUE)
+          #undef TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTRdPosWithRxEnDlySeeds3
+    #else
+          #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE  || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+            #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+    #else
+            #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+    #endif
+    #endif
+    #else
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+        #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE  || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+      #else
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+      #endif
+    #endif
+      #if (OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3    MemTTrainRcvrEnSwPass1
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+    #endif
+      #if (OPTION_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3    MemTTrainOptRcvrEnSwPass1
+      #else
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+    #endif
+      #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3    MemTTrainDQSEdgeDetectSw
+    #else
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+    #endif
+      #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3    MemTTrainDQSEdgeDetectSw
+    #else
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+    #endif
+      #if (OPTION_MAX_RD_LAT_TRAINING == TRUE)
+        #define TECH_TRAIN_MAX_RD_LAT_DDR3    MemTTrainMaxLatency
+    #else
+        #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+    #endif
+      #define TECH_TRAIN_DQS____DDR3 MemTFeatDef
+      #define NB_TRAIN_FLOW_DDR3    MemNDQSTiming3Nb
+      extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceDr;
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR3Dr = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR3,
+        TECH_TRAIN_SW_WL_DDR3,
+        TECH_TRAIN_HW_WL_P1_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_HW_WL_P2_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3,
+        TECH_TRAIN_EXIT_HW_TRN_DDR3,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_MAX_RD_LAT_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3,
+        TECH_TRAIN_DQS____DDR3
+    };
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_DR { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, memNSequenceDDR3Nb, memNEnableTrainSequenceDr, &memTechTrainingFeatSequenceDDR3Dr },
+    #else
+      #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR3 MemTFeatDef
+      #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+      #define NB_TRAIN_FLOW_DDR3    (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_DR  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #endif
+    #else
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_DR  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_DR  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #endif
+
+  #if (OPTION_MEMCTLR_DA || OPTION_MEMCTLR_Ni || OPTION_MEMCTLR_PH || OPTION_MEMCTLR_RB)
+    #if OPTION_DDR2
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR2 MemTFeatDef
+      #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2    MemTDqsTrainRcvrEnHwPass1
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2    MemTDqsTrainRcvrEnHwPass2
+        #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2  MemTTrainDQSEdgeDetect
+      #else
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2 MemTFeatDef
+        #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2    MemTTrainDQSEdgeDetect
+        #else
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2  MemTFeatDef
+        #endif
+      #endif
+      #if (OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2    MemTTrainRcvrEnSwPass1
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2    MemTFeatDef
+      #else
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2    MemTTrainDQSEdgeDetectSw
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2    MemTFeatDef
+      #else
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_MAX_RD_LAT_TRAINING == TRUE)
+        #define TECH_TRAIN_MAX_RD_LAT_DDR2    MemTTrainMaxLatency
+      #else
+        #define TECH_TRAIN_MAX_RD_LAT_DDR2 MemTFeatDef
+      #endif
+      #define TECH_TRAIN_DQS____DDR2    MemTFeatDef
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR2DA = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR2,
+        TECH_TRAIN_SW_WL_DDR2,
+        TECH_TRAIN_HW_WL_P1_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_HW_WL_P2_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2,
+        TECH_TRAIN_EXIT_HW_TRN_DDR2,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_MAX_RD_LAT_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2,
+        TECH_TRAIN_DQS____DDR2
+      };
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR2PH = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR2,
+        TECH_TRAIN_SW_WL_DDR2,
+        TECH_TRAIN_HW_WL_P1_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_HW_WL_P2_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2,
+        TECH_TRAIN_EXIT_HW_TRN_DDR2,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_MAX_RD_LAT_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2,
+        TECH_TRAIN_DQS____DDR2
+      };
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR2Rb = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR2,
+        TECH_TRAIN_SW_WL_DDR2,
+        TECH_TRAIN_HW_WL_P1_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_HW_WL_P2_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2,
+        TECH_TRAIN_EXIT_HW_TRN_DDR2,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_MAX_RD_LAT_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2,
+        TECH_TRAIN_DQS____DDR2
+      };
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR2Ni = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR2,
+        TECH_TRAIN_SW_WL_DDR2,
+        TECH_TRAIN_HW_WL_P1_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_HW_WL_P2_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2,
+        TECH_TRAIN_EXIT_HW_TRN_DDR2,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_MAX_RD_LAT_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2,
+        TECH_TRAIN_DQS____DDR2
+      };
+      extern OPTION_MEM_FEATURE_NB MemNDQSTiming2Nb;
+      #define NB_TRAIN_FLOW_DDR2    MemNDQSTiming2Nb
+      extern OPTION_MEM_FEATURE_NB memNSequenceDDR2ServerNb;
+      #if (OPTION_MEMCTLR_DA)
+        extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceDA
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_DA { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, memNSequenceDDR2ServerNb, memNEnableTrainSequenceDA, &memTechTrainingFeatSequenceDDR2DA },
+      #else
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_DA  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #endif
+      #if (OPTION_MEMCTLR_PH)
+        extern OPTION_MEM_FEATURE_NB memNEnableTrainSequencePh
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_PH { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, memNSequenceDDR2ServerNb, memNEnableTrainSequencePh, &memTechTrainingFeatSequenceDDR2PH },
+      #else
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_PH  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #endif
+      #if (OPTION_MEMCTLR_RB)
+        extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceRb
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_RB { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, memNSequenceDDR2ServerNb, memNEnableTrainSequenceRb, &memTechTrainingFeatSequenceDDR2Rb },
+      #else
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_RB  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #endif
+
+      #if (OPTION_MEMCTLR_Ni)
+        extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceNi
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_Ni { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION,memNSequenceDDR2ServerNb, memNEnableTrainSequenceNi, &memTechTrainingFeatSequenceDDR2Ni },
+      #else
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_DA  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #endif
+    #else
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #define TECH_TRAIN_MAX_RD_LAT_DDR2 MemTFeatDef
+      #define TECH_TRAIN_DQS____DDR2 MemTFeatDef
+      #define NB_TRAIN_FLOW_DDR2    (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_DA  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_Ni  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_PH  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_RB  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #endif
+    #if OPTION_DDR3
+      #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR3   MemTPreparePhyAssistedTraining
+      #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR3    MemTExitPhyAssistedTraining
+      #if (OPTION_HW_WRITE_LEV_TRAINING == TRUE)
+        #define TECH_TRAIN_HW_WL_P1_DDR3   MemTWriteLevelizationHw3Pass1
+        #define TECH_TRAIN_HW_WL_P2_DDR3   MemTWriteLevelizationHw3Pass2
+      #else
+        #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+        #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_SW_WRITE_LEV_TRAINING == TRUE)
+        #define TECH_TRAIN_SW_WL_DDR3    MemTFeatDef
+      #else
+        #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+        #ifdef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+          #undef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+        #endif
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3    MemTFeatDef
+        #ifdef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+          #undef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+        #endif
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3    MemTFeatDef
+        #if (OPTION_HW_DQS_REC_EN_SEED_TRAINING == TRUE)
+          #undef TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+        #else
+          #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE  || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+            #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+          #else
+            #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+          #endif
+        #endif
+      #else
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+        #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE  || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+          #undef TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+        #else
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+        #endif
+      #endif
+      #if (OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3    MemTTrainRcvrEnSwPass1
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3    MemTTrainOptRcvrEnSwPass1
+      #else
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3    MemTTrainDQSEdgeDetectSw
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3    MemTTrainDQSEdgeDetectSw
+      #else
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_MAX_RD_LAT_TRAINING == TRUE)
+        #define TECH_TRAIN_MAX_RD_LAT_DDR3    MemTTrainMaxLatency
+      #else
+        #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+      #endif
+      #define TECH_TRAIN_DQS____DDR3 MemTFeatDef
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR3DA = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR3,
+        TECH_TRAIN_SW_WL_DDR3,
+        TECH_TRAIN_HW_WL_P1_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_HW_WL_P2_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3,
+        TECH_TRAIN_EXIT_HW_TRN_DDR3,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_MAX_RD_LAT_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3,
+        TECH_TRAIN_DQS____DDR3
+      };
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR3Ph = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR3,
+        TECH_TRAIN_SW_WL_DDR3,
+        TECH_TRAIN_HW_WL_P1_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_HW_WL_P2_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3,
+        TECH_TRAIN_EXIT_HW_TRN_DDR3,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_MAX_RD_LAT_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3,
+        TECH_TRAIN_DQS____DDR3
+      };
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR3Rb = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR3,
+        TECH_TRAIN_SW_WL_DDR3,
+        TECH_TRAIN_HW_WL_P1_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_HW_WL_P2_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3,
+        TECH_TRAIN_EXIT_HW_TRN_DDR3,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_MAX_RD_LAT_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3,
+        TECH_TRAIN_DQS____DDR3
+      };
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR3Ni = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR3,
+        TECH_TRAIN_SW_WL_DDR3,
+        TECH_TRAIN_HW_WL_P1_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_HW_WL_P2_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3,
+        TECH_TRAIN_EXIT_HW_TRN_DDR3,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_MAX_RD_LAT_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3,
+        TECH_TRAIN_DQS____DDR3
+      };
+      #define NB_TRAIN_FLOW_DDR3    MemNDQSTiming3Nb
+      #if (OPTION_MEMCTLR_DA)
+        extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceDA;
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_DA { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, memNSequenceDDR3Nb, memNEnableTrainSequenceDA, &memTechTrainingFeatSequenceDDR3DA },
+      #else
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_DA  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #endif
+      #if (OPTION_MEMCTLR_PH)
+        extern OPTION_MEM_FEATURE_NB memNEnableTrainSequencePh;
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_PH { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, memNSequenceDDR3Nb, memNEnableTrainSequencePh, &memTechTrainingFeatSequenceDDR3Ph },
+      #else
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_PH  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #endif
+      #if (OPTION_MEMCTLR_RB)
+        extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceRb;
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_RB { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, memNSequenceDDR3Nb, memNEnableTrainSequenceRb, &memTechTrainingFeatSequenceDDR3Rb },
+      #else
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_RB  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #endif
+      #if (OPTION_MEMCTLR_Ni)
+        extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceNi;
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_Ni {MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION,memNSequenceDDR3Nb, memNEnableTrainSequenceNi, &memTechTrainingFeatSequenceDDR3Ni },
+      #else
+        #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_Ni  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #endif
+    #else
+      #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR3 MemTFeatDef
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR3 MemTFeatDef
+      #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+      #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+      #define NB_TRAIN_FLOW_DDR3    (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_Ni  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_DA  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_PH  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_RB  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #endif
+  #else
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_Ni  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_Ni  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_DA  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_DA  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_PH  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_PH  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_RB  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_RB  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+  #endif
+
+  #if OPTION_MEMCTLR_HY
+    extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceHy;
+    #if OPTION_DDR2
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR2 MemTFeatDef
+      #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2    MemTDqsTrainRcvrEnHwPass1
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2    MemTDqsTrainRcvrEnHwPass2
+        #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2    MemTTrainDQSEdgeDetect
+      #else
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2 MemTFeatDef
+        #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2    MemTTrainDQSEdgeDetect
+        #else
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2    MemTFeatDef
+        #endif
+      #endif
+      #if (OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2    MemTTrainRcvrEnSwPass1
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2    MemTFeatDef
+      #else
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2    MemTTrainDQSEdgeDetectSw
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2    MemTFeatDef
+      #else
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_MAX_RD_LAT_TRAINING == TRUE)
+        #define TECH_TRAIN_MAX_RD_LAT_DDR2    MemTTrainMaxLatency
+      #else
+        #define TECH_TRAIN_MAX_RD_LAT_DDR2 MemTFeatDef
+      #endif
+      #define TECH_TRAIN_DQS____DDR2    MemTFeatDef
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR2Hy = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR2,
+        TECH_TRAIN_SW_WL_DDR2,
+        TECH_TRAIN_HW_WL_P1_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_HW_WL_P2_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2,
+        TECH_TRAIN_EXIT_HW_TRN_DDR2,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_MAX_RD_LAT_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2,
+        TECH_TRAIN_DQS____DDR2
+      };
+      extern OPTION_MEM_FEATURE_NB MemNDQSTiming2Nb;
+      #define NB_TRAIN_FLOW_DDR2    MemNDQSTiming2Nb
+      extern OPTION_MEM_FEATURE_NB memNSequenceDDR2ServerNb;
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_HY {MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION,memNSequenceDDR2ServerNb, memNEnableTrainSequenceHy, &memTechTrainingFeatSequenceDDR2Hy },
+    #else
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #define TECH_TRAIN_MAX_RD_LAT_DDR2 MemTFeatDef
+      #define TECH_TRAIN_DQS____DDR2 MemTFeatDef
+      #define NB_TRAIN_FLOW_DDR2    (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_HY  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #endif
+    #if OPTION_DDR3
+      #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR3   MemTPreparePhyAssistedTraining
+      #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR3    MemTExitPhyAssistedTraining
+      #if (OPTION_HW_WRITE_LEV_TRAINING == TRUE)
+        #define TECH_TRAIN_HW_WL_P1_DDR3   MemTWriteLevelizationHw3Pass1
+        #define TECH_TRAIN_HW_WL_P2_DDR3   MemTWriteLevelizationHw3Pass2
+      #else
+        #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+        #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_SW_WRITE_LEV_TRAINING == TRUE)
+        #define TECH_TRAIN_SW_WL_DDR3    MemTFeatDef
+      #else
+        #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+        #ifdef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+          #undef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+        #endif
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3    MemTFeatDef
+        #ifdef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+          #undef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+        #endif
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3    MemTFeatDef
+        #if (OPTION_HW_DQS_REC_EN_SEED_TRAINING == TRUE)
+          #undef TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+        #else
+          #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+            #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+          #else
+            #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+          #endif
+        #endif
+      #else
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+        #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE  || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+        #else
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+        #endif
+      #endif
+      #if (OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3    MemTTrainRcvrEnSwPass1
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3    MemTTrainOptRcvrEnSwPass1
+      #else
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3    MemTTrainDQSEdgeDetectSw
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3    MemTTrainDQSEdgeDetectSw
+      #else
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_MAX_RD_LAT_TRAINING == TRUE)
+        #define TECH_TRAIN_MAX_RD_LAT_DDR3    MemTTrainMaxLatency
+      #else
+        #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+      #endif
+      #define TECH_TRAIN_DQS____DDR3 MemTFeatDef
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR3Hy = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR3,
+        TECH_TRAIN_SW_WL_DDR3,
+        TECH_TRAIN_HW_WL_P1_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_HW_WL_P2_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3,
+        TECH_TRAIN_EXIT_HW_TRN_DDR3,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_MAX_RD_LAT_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3,
+        TECH_TRAIN_DQS____DDR3
+      };
+      #define NB_TRAIN_FLOW_DDR3    MemNDQSTiming3Nb
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_HY {MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION,memNSequenceDDR3Nb, memNEnableTrainSequenceHy, &memTechTrainingFeatSequenceDDR3Hy },
+    #else
+      #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR3 MemTFeatDef
+      #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+      #define NB_TRAIN_FLOW_DDR3    (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_HY  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #endif
+  #else
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_HY  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_HY  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+  #endif
+
+  #if OPTION_MEMCTLR_C32
+    extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceC32;
+    #if OPTION_DDR2
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR2 MemTFeatDef
+      #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2    MemTDqsTrainRcvrEnHwPass1
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2    MemTDqsTrainRcvrEnHwPass2
+        #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2    MemTTrainDQSEdgeDetect
+      #else
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2 MemTFeatDef
+        #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+        #else
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+        #endif
+      #endif
+      #if (OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2    MemTTrainRcvrEnSwPass1
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2    MemTFeatDef
+      #else
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2    MemTTrainDQSEdgeDetectSw
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2    MemTFeatDef
+      #else
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #endif
+      #if (OPTION_MAX_RD_LAT_TRAINING == TRUE)
+        #define TECH_TRAIN_MAX_RD_LAT_DDR2    MemTTrainMaxLatency
+      #else
+        #define TECH_TRAIN_MAX_RD_LAT_DDR2 MemTFeatDef
+      #endif
+      #define TECH_TRAIN_DQS____DDR2    MemTFeatDef
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR2C32 = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR2,
+        TECH_TRAIN_SW_WL_DDR2,
+        TECH_TRAIN_HW_WL_P1_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_HW_WL_P2_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2,
+        TECH_TRAIN_EXIT_HW_TRN_DDR2,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2,
+        TECH_TRAIN_MAX_RD_LAT_DDR2,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR2,
+        TECH_TRAIN_DQS____DDR2
+      };
+      extern OPTION_MEM_FEATURE_NB MemNDQSTiming2Nb;
+      #define NB_TRAIN_FLOW_DDR2    MemNDQSTiming2Nb
+      extern OPTION_MEM_FEATURE_NB memNSequenceDDR2ServerNb;
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_C32 {MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION,memNSequenceDDR2ServerNb, memNEnableTrainSequenceC32, &memTechTrainingFeatSequenceDDR2C32 },
+    #else
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+      #define TECH_TRAIN_MAX_RD_LAT_DDR2 MemTFeatDef
+      #define TECH_TRAIN_DQS____DDR2 MemTFeatDef
+      #define NB_TRAIN_FLOW_DDR2    (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_C32  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #endif
+    #if OPTION_DDR3
+      #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR3   MemTPreparePhyAssistedTraining
+      #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR3    MemTExitPhyAssistedTraining
+      #if (OPTION_HW_WRITE_LEV_TRAINING == TRUE)
+        #define TECH_TRAIN_HW_WL_P1_DDR3   MemTWriteLevelizationHw3Pass1
+        #define TECH_TRAIN_HW_WL_P2_DDR3   MemTWriteLevelizationHw3Pass2
+      #else
+        #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+        #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_SW_WRITE_LEV_TRAINING == TRUE)
+        #define TECH_TRAIN_SW_WL_DDR3    MemTFeatDef
+      #else
+        #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+        #ifdef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+          #undef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+        #endif
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3    MemTFeatDef
+        #ifdef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+          #undef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+        #endif
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3    MemTFeatDef
+        #if (OPTION_HW_DQS_REC_EN_SEED_TRAINING == TRUE)
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+        #else
+          #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE  || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+            #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+          #else
+            #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+          #endif
+        #endif
+      #else
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+        #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE  || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+        #else
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+        #endif
+      #endif
+      #if (OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3    MemTTrainRcvrEnSwPass1
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3    MemTTrainOptRcvrEnSwPass1
+      #else
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3    MemTTrainDQSEdgeDetectSw
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3    MemTTrainDQSEdgeDetectSw
+      #else
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_MAX_RD_LAT_TRAINING == TRUE)
+        #define TECH_TRAIN_MAX_RD_LAT_DDR3    MemTTrainMaxLatency
+      #else
+        #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+      #endif
+      #define TECH_TRAIN_DQS____DDR3 MemTFeatDef
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR3C32 = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR3,
+        TECH_TRAIN_SW_WL_DDR3,
+        TECH_TRAIN_HW_WL_P1_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_HW_WL_P2_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3,
+        TECH_TRAIN_EXIT_HW_TRN_DDR3,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_MAX_RD_LAT_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3,
+        TECH_TRAIN_DQS____DDR3
+      };
+      #define NB_TRAIN_FLOW_DDR3    MemNDQSTiming3Nb
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_C32 {MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION,memNSequenceDDR3Nb, memNEnableTrainSequenceC32, &memTechTrainingFeatSequenceDDR3C32 },
+    #else
+      #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR3 MemTFeatDef
+      #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+      #define NB_TRAIN_FLOW_DDR3    (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_C32  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #endif
+  #else
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_C32  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_C32 { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+  #endif
+
+
+  #if OPTION_MEMCTLR_OR
+    extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceOr;
+    #define TECH_TRAIN_ENTER_HW_TRN_DDR2 MemTFeatDef
+    #define TECH_TRAIN_EXIT_HW_TRN_DDR2 MemTFeatDef
+    #define TECH_TRAIN_HW_WL_P1_DDR2 MemTFeatDef
+    #define TECH_TRAIN_HW_WL_P2_DDR2 MemTFeatDef
+    #define TECH_TRAIN_SW_WL_DDR2 MemTFeatDef
+    #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+    #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2 MemTFeatDef
+    #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+    #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+    #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+    #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+    #define TECH_TRAIN_MAX_RD_LAT_DDR2 MemTFeatDef
+    #define TECH_TRAIN_DQS____DDR2 MemTFeatDef
+    #define NB_TRAIN_FLOW_DDR2    (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_OR  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #if OPTION_DDR3
+      #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR3   MemTPreparePhyAssistedTraining
+      #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR3    MemTExitPhyAssistedTraining
+      #if (OPTION_HW_WRITE_LEV_TRAINING == TRUE)
+        #define TECH_TRAIN_HW_WL_P1_DDR3   MemTWriteLevelizationHw3Pass1
+        #define TECH_TRAIN_HW_WL_P2_DDR3   MemTWriteLevelizationHw3Pass2
+      #else
+        #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+        #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_SW_WRITE_LEV_TRAINING == TRUE)
+        #define TECH_TRAIN_SW_WL_DDR3    MemTFeatDef
+      #else
+      #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+        #ifdef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+          #undef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+        #endif
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3    MemTDqsTrainRcvrEnHwPass1
+        #ifdef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+          #undef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+        #endif
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3    MemTDqsTrainRcvrEnHwPass2
+        #if (OPTION_HW_DQS_REC_EN_SEED_TRAINING == TRUE)
+          #undef TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTRdPosWithRxEnDlySeeds3
+        #else
+          #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE  || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+            #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+          #else
+            #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+          #endif
+        #endif
+      #else
+        #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+        #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+        #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE  || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3    MemTTrainDQSEdgeDetect
+        #else
+          #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+        #endif
+      #endif
+      #if (OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3    MemTFeatDef
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #endif
+      #undef TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3
+      #if (OPTION_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3    MemTFeatDef
+      #else
+        #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3    MemTTrainDQSEdgeDetectSw
+      #else
+        #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #endif
+      #undef TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3
+      #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3    MemTTrainDQSEdgeDetectSw
+      #else
+        #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #endif
+      #if (OPTION_MAX_RD_LAT_TRAINING == TRUE)
+        #define TECH_TRAIN_MAX_RD_LAT_DDR3    MemTTrainMaxLatency
+      #else
+        #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+      #endif
+      #define TECH_TRAIN_DQS____DDR3 MemTFeatDef
+      MEM_TECH_FEAT_BLOCK  memTechTrainingFeatSequenceDDR3OR = {
+        MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+        TECH_TRAIN_ENTER_HW_TRN_DDR3,
+        TECH_TRAIN_SW_WL_DDR3,
+        TECH_TRAIN_HW_WL_P1_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_HW_WL_P2_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3,
+        TECH_TRAIN_EXIT_HW_TRN_DDR3,
+        TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3,
+        TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3,
+        TECH_TRAIN_MAX_RD_LAT_DDR3,
+        TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3,
+        TECH_TRAIN_DQS____DDR3
+      };
+      #define NB_TRAIN_FLOW_DDR3    MemNDQSTiming3Nb
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_OR {MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION,memNSequenceDDR3Nb, memNEnableTrainSequenceOr, &memTechTrainingFeatSequenceDDR3OR },
+    #else
+      #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+      #define TECH_TRAIN_ENTER_HW_TRN_DDR3 MemTFeatDef
+      #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+      #define TECH_TRAIN_EXIT_HW_TRN_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+      #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+      #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+      #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+      #define NB_TRAIN_FLOW_DDR3    (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+      #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_OR  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #endif
+  #else
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_OR  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+    #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_OR  { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+  #endif
+
+  #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_END { MEM_NB_SUPPORT_STRUCT_VERSION, 0, 0, 0 }
+  MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR2[] = {
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_DR
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_DA
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_HY
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_C32
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_Ni
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_OR
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_PH
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_RB
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_END
+  };
+
+  MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR3[] = {
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_DR
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_DA
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_HY
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_C32
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_Ni
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_OR
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_PH
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_RB
+    MEM_TECH_ENABLE_TRAINING_SEQUENCE_END
+  };
+  /*---------------------------------------------------------------------------------------------------
+   * NB TRAINING FLOW CONTROL
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  OPTION_MEM_FEATURE_NB* memNTrainFlowControl[] = {    // Training flow control
+    NB_TRAIN_FLOW_DDR2,
+    NB_TRAIN_FLOW_DDR3,
+  };
+  /*---------------------------------------------------------------------------------------------------
+   * TECHNOLOGY BLOCK
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  MEM_TECH_CONSTRUCTOR* memTechInstalled[] = {    // Types of technology installed
+    MEM_TECH_CONSTRUCTOR_DDR2
+    MEM_TECH_CONSTRUCTOR_DDR3
+    NULL
+  };
+   /*---------------------------------------------------------------------------------------------------
+   * PLATFORM SPECIFIC BLOCK FORM FACTOR DEFINITION
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  #if  OPTION_MEMCTLR_HY
+    #if OPTION_UDIMMS
+      #if OPTION_DDR2
+        #define PLAT_SP_HY_FF_UDIMM2    MemPConstructPsUDef,
+      #else
+        #define PLAT_SP_HY_FF_UDIMM2    MemPConstructPsUDef,
+      #endif
+      #if OPTION_DDR3
+        #define PLAT_SP_HY_FF_UDIMM3    MemPConstructPsUHy3,
+      #else
+        #define PLAT_SP_HY_FF_UDIMM3    MemPConstructPsUDef,
+        #endif
+          #else
+      #define PLAT_SP_HY_FF_UDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_HY_FF_UDIMM3    MemPConstructPsUDef,
+        #endif
+    #if OPTION_RDIMMS
+      #if OPTION_DDR2
+        #define PLAT_SP_HY_FF_RDIMM2    MemPConstructPsUDef,
+      #else
+        #define PLAT_SP_HY_FF_RDIMM2    MemPConstructPsUDef,
+      #endif
+      #if OPTION_DDR3
+        #define PLAT_SP_HY_FF_RDIMM3    MemPConstructPsRHy3,
+        #else
+        #define PLAT_SP_HY_FF_RDIMM3    MemPConstructPsUDef,
+        #endif
+    #else
+      #define PLAT_SP_HY_FF_RDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_HY_FF_RDIMM3    MemPConstructPsUDef,
+      #endif
+    #if OPTION_SODIMMS
+      #if OPTION_DDR2
+        #define PLAT_SP_HY_FF_SDIMM2    MemPConstructPsUDef,
+      #else
+        #define PLAT_SP_HY_FF_SDIMM2    MemPConstructPsUDef,
+      #endif
+      #if OPTION_DDR3
+        #define PLAT_SP_HY_FF_SDIMM3    MemPConstructPsSHy3,
+      #else
+        #define PLAT_SP_HY_FF_SDIMM3    MemPConstructPsUDef,
+      #endif
+      #else
+      #define PLAT_SP_HY_FF_SDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_HY_FF_SDIMM3    MemPConstructPsUDef,
+      #endif
+      #else
+    #define PLAT_SP_HY_FF_SDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_HY_FF_RDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_HY_FF_UDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_HY_FF_SDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_HY_FF_RDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_HY_FF_UDIMM3    MemPConstructPsUDef,
+      #endif
+  MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledHy[MAX_FF_TYPES] = {
+    PLAT_SP_HY_FF_UDIMM2
+    PLAT_SP_HY_FF_RDIMM2
+    PLAT_SP_HY_FF_SDIMM2
+    PLAT_SP_HY_FF_UDIMM3
+    PLAT_SP_HY_FF_RDIMM3
+    PLAT_SP_HY_FF_SDIMM3
+  };
+
+  #if OPTION_MEMCTLR_DR
+    #if OPTION_UDIMMS
+      #if OPTION_DDR2
+        extern MEM_PLAT_SPEC_CFG MemPConstructPsUDr2;
+        #define PLAT_SP_DR_FF_UDIMM2    MemPConstructPsUDr2,
+      #else
+        #define PLAT_SP_DR_FF_UDIMM2    MemPConstructPsUDef,
+      #endif
+      #if OPTION_DDR3
+        #define PLAT_SP_DR_FF_UDIMM3    MemPConstructPsUDr3,
+      #else
+        #define PLAT_SP_DR_FF_UDIMM3    MemPConstructPsUDef,
+      #endif
+    #else
+      #define PLAT_SP_DR_FF_UDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_DR_FF_UDIMM3    MemPConstructPsUDef,
+    #endif
+    #if OPTION_RDIMMS
+      #if OPTION_DDR2
+        extern MEM_PLAT_SPEC_CFG MemPConstructPsRDr2;
+        #define PLAT_SP_DR_FF_RDIMM2    MemPConstructPsRDr2,
+  #else
+        #define PLAT_SP_DR_FF_RDIMM2    MemPConstructPsUDef,
+  #endif
+    #if OPTION_DDR3
+        #define PLAT_SP_DR_FF_RDIMM3    MemPConstructPsRDr3,
+      #else
+        #define PLAT_SP_DR_FF_RDIMM3    MemPConstructPsUDef,
+      #endif
+          #else
+      #define PLAT_SP_DR_FF_RDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_DR_FF_RDIMM3    MemPConstructPsUDef,
+          #endif
+    #if OPTION_SODIMMS
+      #if OPTION_DDR2
+        #define PLAT_SP_DR_FF_SDIMM2    MemPConstructPsUDef,
+      #else
+        #define PLAT_SP_DR_FF_SDIMM2    MemPConstructPsUDef,
+        #endif
+      #if OPTION_DDR3
+        #define PLAT_SP_DR_FF_SDIMM3    MemPConstructPsSDr3,
+      #else
+        #define PLAT_SP_DR_FF_SDIMM3    MemPConstructPsUDef,
+      #endif
+        #else
+      #define PLAT_SP_DR_FF_SDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_DR_FF_SDIMM3    MemPConstructPsUDef,
+        #endif
+      #else
+    #define PLAT_SP_DR_FF_SDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_DR_FF_RDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_DR_FF_UDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_DR_FF_SDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_DR_FF_RDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_DR_FF_UDIMM3    MemPConstructPsUDef,
+      #endif
+  MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledDR[MAX_FF_TYPES] = {
+    PLAT_SP_DR_FF_UDIMM2
+    PLAT_SP_DR_FF_RDIMM2
+    PLAT_SP_DR_FF_SDIMM2
+    PLAT_SP_DR_FF_UDIMM3
+    PLAT_SP_DR_FF_RDIMM3
+    PLAT_SP_DR_FF_SDIMM3
+  };
+
+  #if (OPTION_MEMCTLR_DA == TRUE)
+    #if OPTION_UDIMMS
+      #if OPTION_DDR2
+        #define PLAT_SP_DA_FF_UDIMM2    MemPConstructPsUDef,
+      #else
+        #define PLAT_SP_DA_FF_UDIMM2    MemPConstructPsUDef,
+      #endif
+      #if OPTION_DDR3
+        #define PLAT_SP_DA_FF_UDIMM3    MemPConstructPsUDA3,
+      #else
+        #define PLAT_SP_DA_FF_UDIMM3    MemPConstructPsUDef,
+      #endif
+      #else
+      #define PLAT_SP_DA_FF_UDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_DA_FF_UDIMM3    MemPConstructPsUDef,
+      #endif
+    #if OPTION_RDIMMS
+      #if OPTION_DDR2
+        #define PLAT_SP_DA_FF_RDIMM2    MemPConstructPsUDef,
+      #else
+        #define PLAT_SP_DA_FF_RDIMM2    MemPConstructPsUDef,
+      #endif
+      #if OPTION_DDR3
+        #define PLAT_SP_DA_FF_RDIMM3    MemPConstructPsUDef,
+      #else
+        #define PLAT_SP_DA_FF_RDIMM3    MemPConstructPsUDef,
+      #endif
+    #else
+      #define PLAT_SP_DA_FF_RDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_DA_FF_RDIMM3    MemPConstructPsUDef,
+    #endif
+    #if OPTION_SODIMMS
+      #if OPTION_DDR2
+        #define PLAT_SP_DA_FF_SDIMM2    MemPConstructPsSDA2,
+  #else
+        #define PLAT_SP_DA_FF_SDIMM2    MemPConstructPsUDef,
+  #endif
+    #if OPTION_DDR3
+        #define PLAT_SP_DA_FF_SDIMM3    MemPConstructPsSDA3,
+      #else
+        #define PLAT_SP_DA_FF_SDIMM3    MemPConstructPsUDef,
+      #endif
+      #else
+      #define PLAT_SP_DA_FF_SDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_DA_FF_SDIMM3    MemPConstructPsUDef,
+        #endif
+          #else
+    #define PLAT_SP_DA_FF_SDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_DA_FF_RDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_DA_FF_UDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_DA_FF_SDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_DA_FF_RDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_DA_FF_UDIMM3    MemPConstructPsUDef,
+        #endif
+  MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledDA[MAX_FF_TYPES] = {
+    PLAT_SP_DA_FF_UDIMM2
+    PLAT_SP_DA_FF_RDIMM2
+    PLAT_SP_DA_FF_SDIMM2
+    PLAT_SP_DA_FF_UDIMM3
+    PLAT_SP_DA_FF_RDIMM3
+    PLAT_SP_DA_FF_SDIMM3
+  };
+
+  #if (OPTION_MEMCTLR_Ni == TRUE)
+    #define PLAT_SP_NI_FF_SDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_NI_FF_RDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_NI_FF_UDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_NI_FF_SDIMM3    MemPConstructPsSNi3,
+    #define PLAT_SP_NI_FF_RDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_NI_FF_UDIMM3    MemPConstructPsUNi3,
+      #else
+    #define PLAT_SP_NI_FF_SDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_NI_FF_RDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_NI_FF_UDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_NI_FF_SDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_NI_FF_RDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_NI_FF_UDIMM3    MemPConstructPsUDef,
+  #endif
+  MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledNi[MAX_FF_TYPES] = {
+    PLAT_SP_NI_FF_UDIMM2
+    PLAT_SP_NI_FF_RDIMM2
+    PLAT_SP_NI_FF_SDIMM2
+    PLAT_SP_NI_FF_UDIMM3
+    PLAT_SP_NI_FF_RDIMM3
+    PLAT_SP_NI_FF_SDIMM3
+  };
+
+  #if (OPTION_MEMCTLR_PH == TRUE)
+    #define PLAT_SP_PH_FF_SDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_PH_FF_RDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_PH_FF_UDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_PH_FF_SDIMM3    MemPConstructPsSPh3,
+    #define PLAT_SP_PH_FF_RDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_PH_FF_UDIMM3    MemPConstructPsUPh3,
+        #else
+    #define PLAT_SP_PH_FF_SDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_PH_FF_RDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_PH_FF_UDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_PH_FF_SDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_PH_FF_RDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_PH_FF_UDIMM3    MemPConstructPsUDef,
+        #endif
+  MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledPh[MAX_FF_TYPES] = {
+    PLAT_SP_PH_FF_UDIMM2
+    PLAT_SP_PH_FF_RDIMM2
+    PLAT_SP_PH_FF_SDIMM2
+    PLAT_SP_PH_FF_UDIMM3
+    PLAT_SP_PH_FF_RDIMM3
+    PLAT_SP_PH_FF_SDIMM3
+  };
+
+  #if (OPTION_MEMCTLR_RB == TRUE)
+    #define PLAT_SP_RB_FF_SDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_RB_FF_RDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_RB_FF_UDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_RB_FF_SDIMM3    MemPConstructPsSRb3,
+    #define PLAT_SP_RB_FF_RDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_RB_FF_UDIMM3    MemPConstructPsURb3,
+  #else
+    #define PLAT_SP_RB_FF_SDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_RB_FF_RDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_RB_FF_UDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_RB_FF_SDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_RB_FF_RDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_RB_FF_UDIMM3    MemPConstructPsUDef,
+      #endif
+  MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledRb[MAX_FF_TYPES] = {
+    PLAT_SP_RB_FF_UDIMM2
+    PLAT_SP_RB_FF_RDIMM2
+    PLAT_SP_RB_FF_SDIMM2
+    PLAT_SP_RB_FF_UDIMM3
+    PLAT_SP_RB_FF_RDIMM3
+    PLAT_SP_RB_FF_SDIMM3
+  };
+
+  #if  OPTION_MEMCTLR_C32
+    #if OPTION_UDIMMS
+      #if OPTION_DDR2
+        #define PLAT_SP_C32_FF_UDIMM2    MemPConstructPsUDef,
+      #else
+        #define PLAT_SP_C32_FF_UDIMM2    MemPConstructPsUDef,
+      #endif
+      #if OPTION_DDR3
+        #define PLAT_SP_C32_FF_UDIMM3    MemPConstructPsUC32_3,
+      #else
+        #define PLAT_SP_C32_FF_UDIMM3    MemPConstructPsUDef,
+      #endif
+      #else
+      #define PLAT_SP_C32_FF_UDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_C32_FF_UDIMM3    MemPConstructPsUDef,
+      #endif
+    #if OPTION_RDIMMS
+      #if OPTION_DDR2
+        #define PLAT_SP_C32_FF_RDIMM2    MemPConstructPsUDef,
+      #else
+        #define PLAT_SP_C32_FF_RDIMM2    MemPConstructPsUDef,
+      #endif
+      #if OPTION_DDR3
+        #define PLAT_SP_C32_FF_RDIMM3    MemPConstructPsRC32_3,
+      #else
+        #define PLAT_SP_C32_FF_RDIMM3    MemPConstructPsUDef,
+      #endif
+      #else
+      #define PLAT_SP_C32_FF_RDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_C32_FF_RDIMM3    MemPConstructPsUDef,
+      #endif
+    #if OPTION_SODIMMS
+      #define PLAT_SP_C32_FF_SDIMM2    MemPConstructPsUDef,
+      #define PLAT_SP_C32_FF_SDIMM3    MemPConstructPsUDef,
+    #endif
+  #else
+    #define PLAT_SP_C32_FF_SDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_C32_FF_RDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_C32_FF_UDIMM2    MemPConstructPsUDef,
+    #define PLAT_SP_C32_FF_SDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_C32_FF_RDIMM3    MemPConstructPsUDef,
+    #define PLAT_SP_C32_FF_UDIMM3    MemPConstructPsUDef,
+  #endif
+  MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledC32[MAX_FF_TYPES] = {
+    PLAT_SP_C32_FF_UDIMM2
+    PLAT_SP_C32_FF_RDIMM2
+    PLAT_SP_C32_FF_SDIMM2
+    PLAT_SP_C32_FF_UDIMM3
+    PLAT_SP_C32_FF_RDIMM3
+    PLAT_SP_C32_FF_SDIMM3
+      };
+
+  /*---------------------------------------------------------------------------------------------------
+   * PLATFORM-SPECIFIC CONFIGURATION
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+
+  #if OPTION_MEMCTLR_DR
+    #if OPTION_UDIMMS
+      #if OPTION_DDR2
+        #define PSC_DR_UDIMM_DDR2     //MemAGetPsCfgUDr2
+    #else
+        #define PSC_DR_UDIMM_DDR2
+      #endif
+      #if OPTION_DDR3
+        #define PSC_DR_UDIMM_DDR3    MemAGetPsCfgUDr3,
+      #else
+        #define PSC_DR_UDIMM_DDR3
+      #endif
+    #endif
+    #if OPTION_RDIMMS
+      #if OPTION_DDR2
+        #define PSC_DR_RDIMM_DDR2    MemAGetPsCfgRDr2,
+  #else
+        #define PSC_DR_RDIMM_DDR2
+  #endif
+    #if OPTION_DDR3
+        #define PSC_DR_RDIMM_DDR3    MemAGetPsCfgRDr3,
+      #else
+        #define PSC_DR_RDIMM_DDR3
+      #endif
+    #endif
+    #if OPTION_SODIMMS
+      #if OPTION_DDR2
+        #define PSC_DR_SODIMM_DDR2    //MemAGetPsCfgSDr2
+      #else
+        #define PSC_DR_SODIMM_DDR2
+      #endif
+      #if OPTION_DDR3
+        #define PSC_DR_SODIMM_DDR3    //MemAGetPsCfgSDr3
+      #else
+        #define PSC_DR_SODIMM_DDR3
+        #endif
+        #endif
+  #endif
+
+  #if (OPTION_MEMCTLR_DA == TRUE || OPTION_MEMCTLR_Ni == TRUE || OPTION_MEMCTLR_RB == TRUE || OPTION_MEMCTLR_PH == TRUE)
+    #if OPTION_MEMCTLR_Ni
+      #define PSC_NI_UDIMM_DDR2
+      #define PSC_NI_UDIMM_DDR3     MemAGetPsCfgUNi3,
+      #define PSC_NI_RDIMM_DDR2
+      #define PSC_NI_RDIMM_DDR3
+      #define PSC_NI_SODIMM_DDR2
+      #define PSC_NI_SODIMM_DDR3    MemAGetPsCfgSNi3,
+    #endif
+    #if OPTION_MEMCTLR_PH
+      #define PSC_PH_UDIMM_DDR2
+      #define PSC_PH_UDIMM_DDR3     MemAGetPsCfgUPh3,
+      #define PSC_PH_RDIMM_DDR2
+      #define PSC_PH_RDIMM_DDR3
+      #define PSC_PH_SODIMM_DDR2
+      #define PSC_PH_SODIMM_DDR3    MemAGetPsCfgSPh3,
+    #endif
+    #if OPTION_MEMCTLR_RB
+      #define PSC_RB_UDIMM_DDR2
+      #define PSC_RB_UDIMM_DDR3     MemAGetPsCfgURb3,
+      #define PSC_RB_RDIMM_DDR2
+      #define PSC_RB_RDIMM_DDR3
+      #define PSC_RB_SODIMM_DDR2
+      #define PSC_RB_SODIMM_DDR3    MemAGetPsCfgSRb3,
+    #endif
+    #if OPTION_MEMCTLR_DA
+      #if OPTION_UDIMMS
+        #if OPTION_DDR2
+          #define PSC_DA_UDIMM_DDR2     //MemAGetPsCfgUDr2
+        #else
+          #define PSC_DA_UDIMM_DDR2
+        #endif
+        #if OPTION_DDR3
+          #define PSC_DA_UDIMM_DDR3    MemAGetPsCfgUDA3,
+          #else
+          #define PSC_DA_UDIMM_DDR3
+          #endif
+        #endif
+      #if OPTION_RDIMMS
+        #if OPTION_DDR2
+          #define PSC_DA_RDIMM_DDR2
+      #else
+          #define PSC_DA_RDIMM_DDR2
+        #endif
+        #if OPTION_DDR3
+          #define PSC_DA_RDIMM_DDR3
+        #else
+          #define PSC_DA_RDIMM_DDR3
+        #endif
+      #endif
+      #if OPTION_SODIMMS
+        #if OPTION_DDR2
+          #define PSC_DA_SODIMM_DDR2    MemAGetPsCfgSDA2,
+      #else
+          #define PSC_DA_SODIMM_DDR2
+      #endif
+        #if OPTION_DDR3
+          #define PSC_DA_SODIMM_DDR3    MemAGetPsCfgSDA3,
+      #else
+          #define PSC_DA_SODIMM_DDR3
+      #endif
+      #endif
+    #endif
+  #endif
+
+  #if OPTION_MEMCTLR_HY
+    #if OPTION_UDIMMS
+      #if OPTION_DDR2
+        #define PSC_HY_UDIMM_DDR2     //MemAGetPsCfgUDr2,
+      #else
+        #define PSC_HY_UDIMM_DDR2
+      #endif
+      #if OPTION_DDR3
+        #define PSC_HY_UDIMM_DDR3    MemAGetPsCfgUHy3,
+      #else
+        #define PSC_HY_UDIMM_DDR3
+      #endif
+    #endif
+    #if OPTION_RDIMMS
+      #if OPTION_DDR2
+        #define PSC_HY_RDIMM_DDR2
+      #else
+        #define PSC_HY_RDIMM_DDR2
+      #endif
+      #if OPTION_DDR3
+        #define PSC_HY_RDIMM_DDR3    MemAGetPsCfgRHy3,
+      #else
+        #define PSC_HY_RDIMM_DDR3
+      #endif
+    #endif
+    #if OPTION_SODIMMS
+      #if OPTION_DDR2
+        #define PSC_HY_SODIMM_DDR2    //MemAGetPsCfgSHy2,
+    #else
+        #define PSC_HY_SODIMM_DDR2
+    #endif
+      #if OPTION_DDR3
+        #define PSC_HY_SODIMM_DDR3    //MemAGetPsCfgSHy3,
+  #else
+        #define PSC_HY_SODIMM_DDR3
+      #endif
+    #endif
+  #endif
+
+  #if OPTION_MEMCTLR_C32
+    #if OPTION_UDIMMS
+      #if OPTION_DDR2
+        #define PSC_C32_UDIMM_DDR2     //MemAGetPsCfgUDr2,
+      #else
+        #define PSC_C32_UDIMM_DDR2
+      #endif
+      #if OPTION_DDR3
+        #define PSC_C32_UDIMM_DDR3    MemAGetPsCfgUC32_3,
+      #else
+        #define PSC_C32_UDIMM_DDR3
+      #endif
+    #endif
+    #if OPTION_RDIMMS
+      #if OPTION_DDR2
+        #define PSC_C32_RDIMM_DDR2
+      #else
+        #define PSC_C32_RDIMM_DDR2
+      #endif
+      #if OPTION_DDR3
+        #define PSC_C32_RDIMM_DDR3    MemAGetPsCfgRC32_3,
+      #else
+        #define PSC_C32_RDIMM_DDR3
+      #endif
+    #endif
+    #if OPTION_SODIMMS
+      #if OPTION_DDR2
+        #define PSC_C32_SODIMM_DDR2    //MemAGetPsCfgSC32_2,
+      #else
+        #define PSC_C32_SODIMM_DDR2
+      #endif
+      #if OPTION_DDR3
+        #define PSC_C32_SODIMM_DDR3    //MemAGetPsCfgSC32_3,
+      #else
+        #define PSC_C32_SODIMM_DDR3
+      #endif
+    #endif
+  #endif
+
+  #if OPTION_MEMCTLR_OR
+    #if OPTION_UDIMMS
+      #if OPTION_DDR2
+        #define PSC_OR_UDIMM_DDR2     //MemAGetPsCfgUOr2,
+      #else
+        #define PSC_OR_UDIMM_DDR2
+      #endif
+      #if OPTION_DDR3
+        #define PSC_OR_UDIMM_DDR3     //MemAGetPsCfgUOr3,
+      #else
+        #define PSC_OR_UDIMM_DDR3
+      #endif
+    #endif
+    #if OPTION_RDIMMS
+      #if OPTION_DDR2
+        #define PSC_OR_RDIMM_DDR2
+      #else
+        #define PSC_OR_RDIMM_DDR2
+      #endif
+      #if OPTION_DDR3
+        #define PSC_OR_RDIMM_DDR3     //MemAGetPsCfgROr3,
+      #else
+        #define PSC_OR_RDIMM_DDR3
+      #endif
+    #endif
+    #if OPTION_SODIMMS
+      #if OPTION_DDR2
+        #define PSC_OR_SODIMM_DDR2    //MemAGetPsCfgSOr2,
+      #else
+        #define PSC_OR_SODIMM_DDR2
+      #endif
+      #if OPTION_DDR3
+        #define PSC_OR_SODIMM_DDR3    //MemAGetPsCfgSOr3,
+      #else
+        #define PSC_OR_SODIMM_DDR3
+      #endif
+    #endif
+  #endif
+
+  /*----------------------------------------------------------------------
+   * DEFAULT PSCFG DEFINITIONS
+   *
+   *----------------------------------------------------------------------
+   */
+
+  #ifndef PSC_DR_UDIMM_DDR2
+    #define PSC_DR_UDIMM_DDR2
+      #endif
+  #ifndef PSC_DR_RDIMM_DDR2
+    #define PSC_DR_RDIMM_DDR2
+    #endif
+  #ifndef PSC_DR_SODIMM_DDR2
+    #define PSC_DR_SODIMM_DDR2
+      #endif
+  #ifndef PSC_DR_UDIMM_DDR3
+    #define PSC_DR_UDIMM_DDR3
+      #endif
+  #ifndef PSC_DR_RDIMM_DDR3
+    #define PSC_DR_RDIMM_DDR3
+    #endif
+  #ifndef PSC_DR_SODIMM_DDR3
+    #define PSC_DR_SODIMM_DDR3
+      #endif
+  #ifndef PSC_RB_UDIMM_DDR2
+    #define PSC_RB_UDIMM_DDR2
+      #endif
+  #ifndef PSC_RB_RDIMM_DDR2
+    #define PSC_RB_RDIMM_DDR2
+    #endif
+  #ifndef PSC_RB_SODIMM_DDR2
+    #define PSC_RB_SODIMM_DDR2
+  #endif
+  #ifndef PSC_RB_UDIMM_DDR3
+    #define PSC_RB_UDIMM_DDR3
+  #endif
+  #ifndef PSC_RB_RDIMM_DDR3
+    #define PSC_RB_RDIMM_DDR3
+  #endif
+  #ifndef PSC_RB_SODIMM_DDR3
+    #define PSC_RB_SODIMM_DDR3
+  #endif
+  #ifndef PSC_DA_UDIMM_DDR2
+    #define PSC_DA_UDIMM_DDR2
+      #endif
+  #ifndef PSC_DA_RDIMM_DDR2
+    #define PSC_DA_RDIMM_DDR2
+    #endif
+  #ifndef PSC_DA_SODIMM_DDR2
+    #define PSC_DA_SODIMM_DDR2
+      #endif
+  #ifndef PSC_DA_UDIMM_DDR3
+    #define PSC_DA_UDIMM_DDR3
+    #endif
+  #ifndef PSC_DA_RDIMM_DDR3
+    #define PSC_DA_RDIMM_DDR3
+  #endif
+  #ifndef PSC_DA_SODIMM_DDR3
+    #define PSC_DA_SODIMM_DDR3
+      #endif
+  #ifndef PSC_NI_UDIMM_DDR2
+    #define PSC_NI_UDIMM_DDR2
+      #endif
+  #ifndef PSC_NI_RDIMM_DDR2
+    #define PSC_NI_RDIMM_DDR2
+    #endif
+  #ifndef PSC_NI_SODIMM_DDR2
+    #define PSC_NI_SODIMM_DDR2
+      #endif
+  #ifndef PSC_NI_UDIMM_DDR3
+    #define PSC_NI_UDIMM_DDR3
+      #endif
+  #ifndef PSC_NI_RDIMM_DDR3
+    #define PSC_NI_RDIMM_DDR3
+    #endif
+  #ifndef PSC_NI_SODIMM_DDR3
+    #define PSC_NI_SODIMM_DDR3
+    #endif
+  #ifndef PSC_PH_UDIMM_DDR2
+    #define PSC_PH_UDIMM_DDR2
+  #endif
+  #ifndef PSC_PH_RDIMM_DDR2
+    #define PSC_PH_RDIMM_DDR2
+      #endif
+  #ifndef PSC_PH_SODIMM_DDR2
+    #define PSC_PH_SODIMM_DDR2
+    #endif
+  #ifndef PSC_PH_UDIMM_DDR3
+    #define PSC_PH_UDIMM_DDR3
+      #endif
+  #ifndef PSC_PH_RDIMM_DDR3
+      #define PSC_PH_RDIMM_DDR3
+    #endif
+  #ifndef PSC_PH_SODIMM_DDR3
+    #define PSC_PH_SODIMM_DDR3
+  #endif
+  #ifndef PSC_HY_UDIMM_DDR2
+        #define PSC_HY_UDIMM_DDR2
+      #endif
+  #ifndef PSC_HY_RDIMM_DDR2
+        #define PSC_HY_RDIMM_DDR2
+      #endif
+  #ifndef PSC_HY_SODIMM_DDR2
+        #define PSC_HY_SODIMM_DDR2
+      #endif
+  #ifndef PSC_HY_UDIMM_DDR3
+    #define PSC_HY_UDIMM_DDR3
+      #endif
+  #ifndef PSC_HY_RDIMM_DDR3
+    #define PSC_HY_RDIMM_DDR3
+    #endif
+  #ifndef PSC_HY_SODIMM_DDR3
+    #define PSC_HY_SODIMM_DDR3
+  #endif
+  #ifndef PSC_LN_UDIMM_DDR2
+    #define PSC_LN_UDIMM_DDR2
+      #endif
+  #ifndef PSC_LN_RDIMM_DDR2
+    #define PSC_LN_RDIMM_DDR2
+      #endif
+  #ifndef PSC_LN_SODIMM_DDR2
+    #define PSC_LN_SODIMM_DDR2
+    #endif
+  #ifndef PSC_LN_UDIMM_DDR3
+    #define PSC_LN_UDIMM_DDR3
+      #endif
+  #ifndef PSC_LN_RDIMM_DDR3
+    #define PSC_LN_RDIMM_DDR3
+      #endif
+  #ifndef PSC_LN_SODIMM_DDR3
+    #define PSC_LN_SODIMM_DDR3
+    #endif
+  #ifndef PSC_OR_UDIMM_DDR2
+    #define PSC_OR_UDIMM_DDR2
+      #endif
+  #ifndef PSC_OR_RDIMM_DDR2
+    #define PSC_OR_RDIMM_DDR2
+      #endif
+  #ifndef PSC_OR_SODIMM_DDR2
+    #define PSC_OR_SODIMM_DDR2
+    #endif
+  #ifndef PSC_OR_UDIMM_DDR3
+    #define PSC_OR_UDIMM_DDR3
+  #endif
+  #ifndef PSC_OR_RDIMM_DDR3
+    #define PSC_OR_RDIMM_DDR3
+      #endif
+  #ifndef PSC_OR_SODIMM_DDR3
+    #define PSC_OR_SODIMM_DDR3
+      #endif
+  #ifndef PSC_C32_UDIMM_DDR3
+    #define PSC_C32_UDIMM_DDR3
+    #endif
+  #ifndef PSC_C32_RDIMM_DDR3
+    #define PSC_C32_RDIMM_DDR3
+      #endif
+  #ifndef PSC_ON_UDIMM_DDR2
+    #define PSC_ON_UDIMM_DDR2
+      #endif
+  #ifndef PSC_ON_RDIMM_DDR2
+    #define PSC_ON_RDIMM_DDR2
+    #endif
+  #ifndef PSC_ON_SODIMM_DDR2
+    #define PSC_ON_SODIMM_DDR2
+      #endif
+  #ifndef PSC_ON_UDIMM_DDR3
+    #define PSC_ON_UDIMM_DDR3
+      #endif
+  #ifndef PSC_ON_RDIMM_DDR3
+    #define PSC_ON_RDIMM_DDR3
+    #endif
+  #ifndef PSC_ON_SODIMM_DDR3
+    #define PSC_ON_SODIMM_DDR3
+  #endif
+
+  MEM_PLATFORM_CFG* memPlatformTypeInstalled[] = {
+    PSC_DR_UDIMM_DDR2
+    PSC_DR_RDIMM_DDR2
+    PSC_DR_SODIMM_DDR2
+    PSC_DR_UDIMM_DDR3
+    PSC_DR_RDIMM_DDR3
+    PSC_DR_SODIMM_DDR3
+    PSC_RB_UDIMM_DDR3
+    PSC_RB_SODIMM_DDR3
+    PSC_DA_SODIMM_DDR2
+    PSC_DA_UDIMM_DDR3
+    PSC_DA_SODIMM_DDR3
+    PSC_NI_UDIMM_DDR3
+    PSC_NI_SODIMM_DDR3
+    PSC_PH_UDIMM_DDR3
+    PSC_PH_SODIMM_DDR3
+    PSC_HY_UDIMM_DDR3
+    PSC_HY_RDIMM_DDR3
+    PSC_HY_SODIMM_DDR3
+    PSC_LN_UDIMM_DDR3
+    PSC_LN_RDIMM_DDR3
+    PSC_LN_SODIMM_DDR3
+    PSC_OR_UDIMM_DDR3
+    PSC_OR_RDIMM_DDR3
+    PSC_OR_SODIMM_DDR3
+    PSC_C32_UDIMM_DDR3
+    PSC_C32_RDIMM_DDR3
+    PSC_ON_UDIMM_DDR3
+    PSC_ON_RDIMM_DDR3
+    PSC_ON_SODIMM_DDR3
+    NULL
+  };
+  CONST UINTN SIZE_OF_PLATFORM = (sizeof (memPlatformTypeInstalled) / sizeof (MEM_PLATFORM_CFG*));
+//  #if SIZE_OF_PLATFORM > MAX_PLATFORM_TYPES
+//    #error   Size of memPlatformTypeInstalled array larger than MAX_PLATFORM_TYPES
+//  #endif
+
+  /*---------------------------------------------------------------------------------------------------
+   * EXTRACTABLE PLATFORM SPECIFIC CONFIGURATION
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  #define MEM_PSC_FLOW_BLOCK_END NULL
+  #define PSC_TBL_END NULL
+  #define MEM_PSC_FLOW_DEFTRUE (BOOLEAN (*) (MEM_NB_BLOCK*, MEM_PSC_TABLE_BLOCK *)) memDefTrue
+
+  #if OPTION_MEMCTLR_OR
+    #if OPTION_UDIMMS
+      #if OPTION_AM3_SOCKET_SUPPORT
+        extern PSC_TBL_ENTRY MaxFreqTblEntUAM3;
+        #define PSC_TBL_OR_UDIMM3_MAX_FREQ_AM3  &MaxFreqTblEntUAM3,
+        extern PSC_TBL_ENTRY DramTermTblEntUAM3;
+        #define PSC_TBL_OR_UDIMM3_DRAM_TERM_AM3  &DramTermTblEntUAM3,
+        extern PSC_TBL_ENTRY OdtPat1DTblEntUAM3;
+        #define PSC_TBL_OR_UDIMM3_ODT_PAT_1D_AM3  &OdtPat1DTblEntUAM3,
+        extern PSC_TBL_ENTRY OdtPat2DTblEntUAM3;
+        #define PSC_TBL_OR_UDIMM3_ODT_PAT____AM3  &OdtPat2DTblEntUAM3,
+        extern PSC_TBL_ENTRY OdtPat3DTblEntUAM3;
+        #define PSC_TBL_OR_UDIMM3_ODT_PAT_3D_AM3  &OdtPat3DTblEntUAM3,
+        extern PSC_TBL_ENTRY SAOTblEntUAM3;
+        #define PSC_TBL_OR_UDIMM3_SAO_AM3  &SAOTblEntUAM3,
+        extern PSC_TBL_ENTRY ClkDisMapEntUAM3;
+        #define PSC_TBL_OR_UDIMM3_CLK_DIS_AM3 &ClkDisMapEntUAM3,
+        extern PSC_TBL_ENTRY S__TblEntUAM3;
+        #define PSC_TBL_OR_UDIMM3_S___AM3  &S__TblEntUAM3,
+        extern PSC_TBL_ENTRY WLPass1SeedEntUAM3;
+        #define PSC_TBL_OR_UDIMM3_WL_SEED_AM3  &WLPass1SeedEntUAM3,
+        extern PSC_TBL_ENTRY HWRxEnPass1SeedEntUAM3;
+        #define PSC_TBL_OR_UDIMM3_HWRXEN_SEED_AM3  &HWRxEnPass1SeedEntUAM3,
+      #endif
+      #if OPTION_C32_SOCKET_SUPPORT
+        extern PSC_TBL_ENTRY MaxFreqTblEntUC32;
+        #define PSC_TBL_OR_UDIMM3_MAX_FREQ_C32  &MaxFreqTblEntUC32,
+        extern PSC_TBL_ENTRY DramTermTblEntUC32;
+        #define PSC_TBL_OR_UDIMM3_DRAM_TERM_C32  &DramTermTblEntUC32,
+        extern PSC_TBL_ENTRY OdtPat1DTblEntUC32;
+        #define PSC_TBL_OR_UDIMM3_ODT_PAT_1D_C32  &OdtPat1DTblEntUC32,
+        extern PSC_TBL_ENTRY OdtPat2DTblEntUC32;
+        #define PSC_TBL_OR_UDIMM3_ODT_PAT____C32  &OdtPat2DTblEntUC32,
+        extern PSC_TBL_ENTRY OdtPat3DTblEntUC32;
+        #define PSC_TBL_OR_UDIMM3_ODT_PAT_3D_C32  &OdtPat3DTblEntUC32,
+        extern PSC_TBL_ENTRY SAOTblEntUC32;
+        #define PSC_TBL_OR_UDIMM3_SAO_C32  &SAOTblEntUC32,
+        extern PSC_TBL_ENTRY ClkDisMapEntUC32;
+        #define PSC_TBL_OR_UDIMM3_CLK_DIS_C32 &ClkDisMapEntUC32,
+        extern PSC_TBL_ENTRY ClkDisMap3DEntUC32;
+        #define PSC_TBL_OR_UDIMM3_CLK_DIS_3D_C32 &ClkDisMap3DEntUC32,
+        extern PSC_TBL_ENTRY S__TblEntUC32;
+        #define PSC_TBL_OR_UDIMM3_S___C32  &S__TblEntUC32,
+        extern PSC_TBL_ENTRY WLPass1SeedEntUC32;
+        #define PSC_TBL_OR_UDIMM3_WL_SEED_C32  &WLPass1SeedEntUC32,
+        extern PSC_TBL_ENTRY HWRxEnPass1SeedEntUC32;
+        #define PSC_TBL_OR_UDIMM3_HWRXEN_SEED_C32  &HWRxEnPass1SeedEntUC32,
+      #endif
+      #if OPTION_G34_SOCKET_SUPPORT
+        extern PSC_TBL_ENTRY MaxFreqTblEntUG34;
+        #define PSC_TBL_OR_UDIMM3_MAX_FREQ_G34  &MaxFreqTblEntUG34,
+        extern PSC_TBL_ENTRY DramTermTblEntUG34;
+        #define PSC_TBL_OR_UDIMM3_DRAM_TERM_G34  &DramTermTblEntUG34,
+        extern PSC_TBL_ENTRY OdtPat1DTblEntUG34;
+        #define PSC_TBL_OR_UDIMM3_ODT_PAT_1D_G34  &OdtPat1DTblEntUG34,
+        extern PSC_TBL_ENTRY OdtPat2DTblEntUG34;
+        #define PSC_TBL_OR_UDIMM3_ODT_PAT____G34  &OdtPat2DTblEntUG34,
+        extern PSC_TBL_ENTRY OdtPat3DTblEntUG34;
+        #define PSC_TBL_OR_UDIMM3_ODT_PAT_3D_G34  &OdtPat3DTblEntUG34,
+        extern PSC_TBL_ENTRY SAOTblEntUG34;
+        #define PSC_TBL_OR_UDIMM3_SAO_G34  &SAOTblEntUG34,
+        extern PSC_TBL_ENTRY ClkDisMapEntUG34;
+        #define PSC_TBL_OR_UDIMM3_CLK_DIS_G34 &ClkDisMapEntUG34,
+        extern PSC_TBL_ENTRY S__TblEntUG34;
+        #define PSC_TBL_OR_UDIMM3_S___G34  &S__TblEntUG34,
+        extern PSC_TBL_ENTRY WLPass1SeedEntUG34;
+        #define PSC_TBL_OR_UDIMM3_WL_SEED_G34  &WLPass1SeedEntUG34,
+        extern PSC_TBL_ENTRY HWRxEnPass1SeedEntUG34;
+        #define PSC_TBL_OR_UDIMM3_HWRXEN_SEED_G34  &HWRxEnPass1SeedEntUG34,
+    #endif
+    #endif
+    #if OPTION_RDIMMS
+      #if OPTION_C32_SOCKET_SUPPORT
+        extern PSC_TBL_ENTRY MaxFreqTblEntRC32;
+        #define PSC_TBL_OR_RDIMM3_MAX_FREQ_C32  &MaxFreqTblEntRC32,
+        extern PSC_TBL_ENTRY DramTermTblEntRC32;
+        #define PSC_TBL_OR_RDIMM3_DRAM_TERM_C32  &DramTermTblEntRC32,
+        extern PSC_TBL_ENTRY OdtPat1DTblEntRC32;
+        #define PSC_TBL_OR_RDIMM3_ODT_PAT_1D_C32  &OdtPat1DTblEntRC32,
+        extern PSC_TBL_ENTRY OdtPat2DTblEntRC32;
+        #define PSC_TBL_OR_RDIMM3_ODT_PAT____C32  &OdtPat2DTblEntRC32,
+        extern PSC_TBL_ENTRY OdtPat3DTblEntRC32;
+        #define PSC_TBL_OR_RDIMM3_ODT_PAT_3D_C32  &OdtPat3DTblEntRC32,
+        extern PSC_TBL_ENTRY SAOTblEntRC32;
+        #define PSC_TBL_OR_RDIMM3_SAO_C32  &SAOTblEntRC32,
+        extern PSC_TBL_ENTRY RC2IBTTblEntRC32;
+        #define PSC_TBL_OR_RDIMM3_RC2IBT_C32  &RC2IBTTblEntRC32,
+        extern PSC_TBL_ENTRY RC10OpSpdTblEntRC32;
+        #define PSC_TBL_OR_RDIMM3_RC10OPSPD_C32  &RC10OpSpdTblEntRC32,
+        extern PSC_TBL_ENTRY ClkDisMapEntRC32;
+        #define PSC_TBL_OR_RDIMM3_CLK_DIS_C32 &ClkDisMapEntRC32,
+        extern PSC_TBL_ENTRY S__TblEntRC32;
+        #define PSC_TBL_OR_RDIMM3_S___C32  &S__TblEntRC32,
+        extern PSC_TBL_ENTRY WLPass1SeedEntRC32;
+        #define PSC_TBL_OR_RDIMM3_WL_SEED_C32  &WLPass1SeedEntRC32,
+        extern PSC_TBL_ENTRY HWRxEnPass1SeedEntRC32;
+        #define PSC_TBL_OR_RDIMM3_HWRXEN_SEED_C32  &HWRxEnPass1SeedEntRC32,
+    #endif
+      #if OPTION_G34_SOCKET_SUPPORT
+        extern PSC_TBL_ENTRY MaxFreqTblEntRG34;
+        #define PSC_TBL_OR_RDIMM3_MAX_FREQ_G34  &MaxFreqTblEntRG34,
+        extern PSC_TBL_ENTRY DramTermTblEntRG34;
+        #define PSC_TBL_OR_RDIMM3_DRAM_TERM_G34  &DramTermTblEntRG34,
+        extern PSC_TBL_ENTRY OdtPat1DTblEntRG34;
+        #define PSC_TBL_OR_RDIMM3_ODT_PAT_1D_G34  &OdtPat1DTblEntRG34,
+        extern PSC_TBL_ENTRY OdtPat2DTblEntRG34;
+        #define PSC_TBL_OR_RDIMM3_ODT_PAT____G34  &OdtPat2DTblEntRG34,
+        extern PSC_TBL_ENTRY OdtPat3DTblEntRG34;
+        #define PSC_TBL_OR_RDIMM3_ODT_PAT_3D_G34  &OdtPat3DTblEntRG34,
+        extern PSC_TBL_ENTRY SAOTblEntRG34;
+        #define PSC_TBL_OR_RDIMM3_SAO_G34  &SAOTblEntRG34,
+        extern PSC_TBL_ENTRY RC2IBTTblEntRG34;
+        #define PSC_TBL_OR_RDIMM3_RC2IBT_G34  &RC2IBTTblEntRG34,
+        extern PSC_TBL_ENTRY RC10OpSpdTblEntRG34;
+        #define PSC_TBL_OR_RDIMM3_RC10OPSPD_G34  &RC10OpSpdTblEntRG34,
+        extern PSC_TBL_ENTRY ClkDisMapEntRG34;
+        #define PSC_TBL_OR_RDIMM3_CLK_DIS_G34 &ClkDisMapEntRG34,
+        extern PSC_TBL_ENTRY S__TblEntRG34;
+        #define PSC_TBL_OR_RDIMM3_S___G34  &S__TblEntRG34,
+        extern PSC_TBL_ENTRY WLPass1SeedEntRG34;
+        #define PSC_TBL_OR_RDIMM3_WL_SEED_G34  &WLPass1SeedEntRG34,
+        extern PSC_TBL_ENTRY HWRxEnPass1SeedEntRG34;
+        #define PSC_TBL_OR_RDIMM3_HWRXEN_SEED_G34  &HWRxEnPass1SeedEntRG34,
+    #endif
+    #endif
+    //#if OPTION_SODIMMS
+    //#endif
+    #if OPTION_LRDIMMS
+      #if OPTION_C32_SOCKET_SUPPORT
+        extern PSC_TBL_ENTRY MaxFreqTblEntLRC32;
+        #define PSC_TBL_OR_LRDIMM3_MAX_FREQ_C32  &MaxFreqTblEntLRC32,
+        extern PSC_TBL_ENTRY DramTermTblEntLRC32;
+        #define PSC_TBL_OR_LRDIMM3_DRAM_TERM_C32  &DramTermTblEntLRC32,
+        extern PSC_TBL_ENTRY OdtPat1DTblEntLRC32;
+        #define PSC_TBL_OR_LRDIMM3_ODT_PAT_1D_C32  &OdtPat1DTblEntLRC32,
+        extern PSC_TBL_ENTRY OdtPat2DTblEntLRC32;
+        #define PSC_TBL_OR_LRDIMM3_ODT_PAT____C32  &OdtPat2DTblEntLRC32,
+        extern PSC_TBL_ENTRY OdtPat3DTblEntLRC32;
+        #define PSC_TBL_OR_LRDIMM3_ODT_PAT_3D_C32  &OdtPat3DTblEntLRC32,
+        extern PSC_TBL_ENTRY SAOTblEntLRC32;
+        #define PSC_TBL_OR_LRDIMM3_SAO_C32  &SAOTblEntLRC32,
+        extern PSC_TBL_ENTRY IBTTblEntLRC32;
+        #define PSC_TBL_OR_LRDIMM3_IBT_C32  &IBTTblEntLRC32,
+        extern PSC_TBL_ENTRY ClkDisMapEntLRC32;
+        #define PSC_TBL_OR_LRDIMM3_CLK_DIS_C32 &ClkDisMapEntLRC32,
+        extern PSC_TBL_ENTRY S__TblEntLRC32;
+        #define PSC_TBL_OR_LRDIMM3_S___C32  &S__TblEntLRC32,
+        extern PSC_TBL_ENTRY WLPass1SeedEntLRC32;
+        #define PSC_TBL_OR_LRDIMM3_WL_SEED_C32  &WLPass1SeedEntLRC32,
+        extern PSC_TBL_ENTRY HWRxEnPass1SeedEntLRC32;
+        #define PSC_TBL_OR_LRDIMM3_HWRXEN_SEED_C32 &HWRxEnPass1SeedEntLRC32,
+    #endif
+      #if OPTION_G34_SOCKET_SUPPORT
+        extern PSC_TBL_ENTRY MaxFreqTblEntLRG34;
+        #define PSC_TBL_OR_LRDIMM3_MAX_FREQ_G34  &MaxFreqTblEntLRG34,
+        extern PSC_TBL_ENTRY DramTermTblEntLRG34;
+        #define PSC_TBL_OR_LRDIMM3_DRAM_TERM_G34  &DramTermTblEntLRG34,
+        extern PSC_TBL_ENTRY OdtPat1DTblEntLRG34;
+        #define PSC_TBL_OR_LRDIMM3_ODT_PAT_1D_G34  &OdtPat1DTblEntLRG34,
+        extern PSC_TBL_ENTRY OdtPat2DTblEntLRG34;
+        #define PSC_TBL_OR_LRDIMM3_ODT_PAT____G34  &OdtPat2DTblEntLRG34,
+        extern PSC_TBL_ENTRY OdtPat3DTblEntLRG34;
+        #define PSC_TBL_OR_LRDIMM3_ODT_PAT_3D_G34  &OdtPat3DTblEntLRG34,
+        extern PSC_TBL_ENTRY SAOTblEntLRG34;
+        #define PSC_TBL_OR_LRDIMM3_SAO_G34  &SAOTblEntLRG34,
+        extern PSC_TBL_ENTRY IBTTblEntLRG34;
+        #define PSC_TBL_OR_LRDIMM3_IBT_G34  &IBTTblEntLRG34,
+        extern PSC_TBL_ENTRY ClkDisMapEntLRG34;
+        #define PSC_TBL_OR_LRDIMM3_CLK_DIS_G34 &ClkDisMapEntLRG34,
+        extern PSC_TBL_ENTRY S__TblEntLRG34;
+        #define PSC_TBL_OR_LRDIMM3_S___G34  &S__TblEntLRG34,
+        extern PSC_TBL_ENTRY WLPass1SeedEntLRG34;
+        #define PSC_TBL_OR_LRDIMM3_WL_SEED_G34  &WLPass1SeedEntLRG34,
+        extern PSC_TBL_ENTRY HWRxEnPass1SeedEntLRG34;
+        #define PSC_TBL_OR_LRDIMM3_HWRXEN_SEED_G34 &HWRxEnPass1SeedEntLRG34,
+    #endif
+    #endif
+    extern PSC_TBL_ENTRY MR0WrTblEntry;
+    #define PSC_TBL_OR_MR0_WR  &MR0WrTblEntry,
+    extern PSC_TBL_ENTRY MR0CLTblEntry;
+    #define PSC_TBL_OR_MR0_CL  &MR0CLTblEntry,
+    extern PSC_TBL_ENTRY OrDdr3CKETriEnt;
+    #define PSC_TBL_OR_CKE_TRI &OrDdr3CKETriEnt,
+    extern PSC_TBL_ENTRY OrDdr3ODTTri3DEnt;
+    #define PSC_TBL_OR_ODT_TRI_3D &OrDdr3ODTTri3DEnt,
+    extern PSC_TBL_ENTRY OrDdr3ODTTriEnt;
+    #define PSC_TBL_OR_ODT_TRI &OrDdr3ODTTriEnt,
+    extern PSC_TBL_ENTRY OrUDdr3CSTriEnt;
+    #define PSC_TBL_OR_UDIMM3_CS_TRI &OrUDdr3CSTriEnt,
+    extern PSC_TBL_ENTRY OrDdr3CSTriEnt;
+    #define PSC_TBL_OR_CS_TRI &OrDdr3CSTriEnt,
+    extern PSC_TBL_ENTRY OrLRDdr3ODTTri3DEnt;
+    #define PSC_TBL_OR_LRDIMM3_ODT_TRI_3D &OrLRDdr3ODTTri3DEnt,
+    extern PSC_TBL_ENTRY OrLRDdr3ODTTriEnt;
+    #define PSC_TBL_OR_LRDIMM3_ODT_TRI &OrLRDdr3ODTTriEnt,
+
+    #ifndef PSC_TBL_OR_UDIMM3_MAX_FREQ_AM3
+      #define PSC_TBL_OR_UDIMM3_MAX_FREQ_AM3
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_MAX_FREQ_C32
+      #define PSC_TBL_OR_UDIMM3_MAX_FREQ_C32
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_MAX_FREQ_G34
+      #define PSC_TBL_OR_UDIMM3_MAX_FREQ_G34
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_DRAM_TERM_AM3
+      #define PSC_TBL_OR_UDIMM3_DRAM_TERM_AM3
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_DRAM_TERM_C32
+      #define PSC_TBL_OR_UDIMM3_DRAM_TERM_C32
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_DRAM_TERM_G34
+      #define PSC_TBL_OR_UDIMM3_DRAM_TERM_G34
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_ODT_PAT_1D_AM3
+      #define PSC_TBL_OR_UDIMM3_ODT_PAT_1D_AM3
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_ODT_PAT_1D_C32
+      #define PSC_TBL_OR_UDIMM3_ODT_PAT_1D_C32
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_ODT_PAT_1D_G34
+      #define PSC_TBL_OR_UDIMM3_ODT_PAT_1D_G34
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_ODT_PAT____AM3
+      #define PSC_TBL_OR_UDIMM3_ODT_PAT____AM3
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_ODT_PAT____C32
+      #define PSC_TBL_OR_UDIMM3_ODT_PAT____C32
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_ODT_PAT____G34
+      #define PSC_TBL_OR_UDIMM3_ODT_PAT____G34
+  #endif
+    #ifndef PSC_TBL_OR_UDIMM3_ODT_PAT_3D_AM3
+      #define PSC_TBL_OR_UDIMM3_ODT_PAT_3D_AM3
+      #endif
+    #ifndef PSC_TBL_OR_UDIMM3_ODT_PAT_3D_C32
+      #define PSC_TBL_OR_UDIMM3_ODT_PAT_3D_C32
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_ODT_PAT_3D_G34
+      #define PSC_TBL_OR_UDIMM3_ODT_PAT_3D_G34
+      #endif
+    #ifndef PSC_TBL_OR_UDIMM3_SAO_AM3
+      #define PSC_TBL_OR_UDIMM3_SAO_AM3
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_SAO_C32
+      #define PSC_TBL_OR_UDIMM3_SAO_C32
+      #endif
+    #ifndef PSC_TBL_OR_UDIMM3_SAO_G34
+      #define PSC_TBL_OR_UDIMM3_SAO_G34
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_S___AM3
+      #define PSC_TBL_OR_UDIMM3_S___AM3
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_S___C32
+      #define PSC_TBL_OR_UDIMM3_S___C32
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_S___G34
+      #define PSC_TBL_OR_UDIMM3_S___G34
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_WL_SEED_AM3
+      #define PSC_TBL_OR_UDIMM3_WL_SEED_AM3
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_WL_SEED_C32
+      #define PSC_TBL_OR_UDIMM3_WL_SEED_C32
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_WL_SEED_G34
+      #define PSC_TBL_OR_UDIMM3_WL_SEED_G34
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_HWRXEN_SEED_AM3
+      #define PSC_TBL_OR_UDIMM3_HWRXEN_SEED_AM3
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_HWRXEN_SEED_C32
+      #define PSC_TBL_OR_UDIMM3_HWRXEN_SEED_C32
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_HWRXEN_SEED_G34
+      #define PSC_TBL_OR_UDIMM3_HWRXEN_SEED_G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_MAX_FREQ_AM3
+      #define PSC_TBL_OR_RDIMM3_MAX_FREQ_AM3
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_MAX_FREQ_C32
+      #define PSC_TBL_OR_RDIMM3_MAX_FREQ_C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_MAX_FREQ_G34
+      #define PSC_TBL_OR_RDIMM3_MAX_FREQ_G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_DRAM_TERM_AM3
+      #define PSC_TBL_OR_RDIMM3_DRAM_TERM_AM3
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_DRAM_TERM_C32
+      #define PSC_TBL_OR_RDIMM3_DRAM_TERM_C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_DRAM_TERM_G34
+      #define PSC_TBL_OR_RDIMM3_DRAM_TERM_G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_ODT_PAT_1D_AM3
+      #define PSC_TBL_OR_RDIMM3_ODT_PAT_1D_AM3
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_ODT_PAT_1D_C32
+      #define PSC_TBL_OR_RDIMM3_ODT_PAT_1D_C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_ODT_PAT_1D_G34
+      #define PSC_TBL_OR_RDIMM3_ODT_PAT_1D_G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_ODT_PAT____AM3
+      #define PSC_TBL_OR_RDIMM3_ODT_PAT____AM3
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_ODT_PAT____C32
+      #define PSC_TBL_OR_RDIMM3_ODT_PAT____C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_ODT_PAT____G34
+      #define PSC_TBL_OR_RDIMM3_ODT_PAT____G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_ODT_PAT_3D_AM3
+      #define PSC_TBL_OR_RDIMM3_ODT_PAT_3D_AM3
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_ODT_PAT_3D_C32
+      #define PSC_TBL_OR_RDIMM3_ODT_PAT_3D_C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_ODT_PAT_3D_G34
+      #define PSC_TBL_OR_RDIMM3_ODT_PAT_3D_G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_SAO_AM3
+      #define PSC_TBL_OR_RDIMM3_SAO_AM3
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_SAO_C32
+      #define PSC_TBL_OR_RDIMM3_SAO_C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_SAO_G34
+      #define PSC_TBL_OR_RDIMM3_SAO_G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_S___AM3
+      #define PSC_TBL_OR_RDIMM3_S___AM3
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_S___C32
+      #define PSC_TBL_OR_RDIMM3_S___C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_S___G34
+      #define PSC_TBL_OR_RDIMM3_S___G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_RC2IBT_AM3
+      #define PSC_TBL_OR_RDIMM3_RC2IBT_AM3
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_RC2IBT_C32
+      #define PSC_TBL_OR_RDIMM3_RC2IBT_C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_RC2IBT_G34
+      #define PSC_TBL_OR_RDIMM3_RC2IBT_G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_RC10OPSPD_AM3
+      #define PSC_TBL_OR_RDIMM3_RC10OPSPD_AM3
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_RC10OPSPD_C32
+      #define PSC_TBL_OR_RDIMM3_RC10OPSPD_C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_RC10OPSPD_G34
+      #define PSC_TBL_OR_RDIMM3_RC10OPSPD_G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_WL_SEED_AM3
+      #define PSC_TBL_OR_RDIMM3_WL_SEED_AM3
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_WL_SEED_C32
+      #define PSC_TBL_OR_RDIMM3_WL_SEED_C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_WL_SEED_G34
+      #define PSC_TBL_OR_RDIMM3_WL_SEED_G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_HWRXEN_SEED_AM3
+      #define PSC_TBL_OR_RDIMM3_HWRXEN_SEED_AM3
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_HWRXEN_SEED_C32
+      #define PSC_TBL_OR_RDIMM3_HWRXEN_SEED_C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_HWRXEN_SEED_G34
+      #define PSC_TBL_OR_RDIMM3_HWRXEN_SEED_G34
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_MAX_FREQ_C32
+      #define PSC_TBL_OR_LRDIMM3_MAX_FREQ_C32
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_MAX_FREQ_G34
+      #define PSC_TBL_OR_LRDIMM3_MAX_FREQ_G34
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_DRAM_TERM_C32
+      #define PSC_TBL_OR_LRDIMM3_DRAM_TERM_C32
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_DRAM_TERM_G34
+      #define PSC_TBL_OR_LRDIMM3_DRAM_TERM_G34
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_ODT_PAT_1D_C32
+      #define PSC_TBL_OR_LRDIMM3_ODT_PAT_1D_C32
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_ODT_PAT_1D_G34
+      #define PSC_TBL_OR_LRDIMM3_ODT_PAT_1D_G34
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_ODT_PAT____C32
+      #define PSC_TBL_OR_LRDIMM3_ODT_PAT____C32
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_ODT_PAT____G34
+      #define PSC_TBL_OR_LRDIMM3_ODT_PAT____G34
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_ODT_PAT_3D_C32
+      #define PSC_TBL_OR_LRDIMM3_ODT_PAT_3D_C32
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_ODT_PAT_3D_G34
+      #define PSC_TBL_OR_LRDIMM3_ODT_PAT_3D_G34
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_SAO_C32
+      #define PSC_TBL_OR_LRDIMM3_SAO_C32
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_SAO_G34
+      #define PSC_TBL_OR_LRDIMM3_SAO_G34
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_S___C32
+      #define PSC_TBL_OR_LRDIMM3_S___C32
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_S___G34
+      #define PSC_TBL_OR_LRDIMM3_S___G34
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_IBT_C32
+      #define PSC_TBL_OR_LRDIMM3_IBT_C32
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_IBT_G34
+      #define PSC_TBL_OR_LRDIMM3_IBT_G34
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_CLK_DIS_AM3
+      #define PSC_TBL_OR_UDIMM3_CLK_DIS_AM3
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_CLK_DIS_C32
+      #define PSC_TBL_OR_UDIMM3_CLK_DIS_C32
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_CLK_DIS_3D_C32
+      #define PSC_TBL_OR_UDIMM3_CLK_DIS_3D_C32
+    #endif
+    #ifndef PSC_TBL_OR_UDIMM3_CLK_DIS_G34
+      #define PSC_TBL_OR_UDIMM3_CLK_DIS_G34
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_CLK_DIS_C32
+      #define PSC_TBL_OR_RDIMM3_CLK_DIS_C32
+    #endif
+    #ifndef PSC_TBL_OR_RDIMM3_CLK_DIS_G34
+      #define PSC_TBL_OR_RDIMM3_CLK_DIS_G34
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_CLK_DIS_C32
+      #define PSC_TBL_OR_LRDIMM3_CLK_DIS_C32
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_CLK_DIS_G34
+      #define PSC_TBL_OR_LRDIMM3_CLK_DIS_G34
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_WL_SEED_AM3
+      #define PSC_TBL_OR_LRDIMM3_WL_SEED_AM3
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_WL_SEED_C32
+      #define PSC_TBL_OR_LRDIMM3_WL_SEED_C32
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_WL_SEED_G34
+      #define PSC_TBL_OR_LRDIMM3_WL_SEED_G34
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_HWRXEN_SEED_AM3
+      #define PSC_TBL_OR_LRDIMM3_HWRXEN_SEED_AM3
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_HWRXEN_SEED_C32
+      #define PSC_TBL_OR_LRDIMM3_HWRXEN_SEED_C32
+    #endif
+    #ifndef PSC_TBL_OR_LRDIMM3_HWRXEN_SEED_G34
+      #define PSC_TBL_OR_LRDIMM3_HWRXEN_SEED_G34
+    #endif
+
+
+    PSC_TBL_ENTRY* memPSCTblMaxFreqArrayOR[] = {
+      PSC_TBL_OR_UDIMM3_MAX_FREQ_AM3
+      PSC_TBL_OR_UDIMM3_MAX_FREQ_C32
+      PSC_TBL_OR_UDIMM3_MAX_FREQ_G34
+      PSC_TBL_OR_RDIMM3_MAX_FREQ_AM3
+      PSC_TBL_OR_RDIMM3_MAX_FREQ_C32
+      PSC_TBL_OR_RDIMM3_MAX_FREQ_G34
+      PSC_TBL_OR_LRDIMM3_MAX_FREQ_C32
+      PSC_TBL_OR_LRDIMM3_MAX_FREQ_G34
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblDramTermArrayOR[] = {
+      PSC_TBL_OR_UDIMM3_DRAM_TERM_AM3
+      PSC_TBL_OR_UDIMM3_DRAM_TERM_C32
+      PSC_TBL_OR_UDIMM3_DRAM_TERM_G34
+      PSC_TBL_OR_RDIMM3_DRAM_TERM_AM3
+      PSC_TBL_OR_RDIMM3_DRAM_TERM_C32
+      PSC_TBL_OR_RDIMM3_DRAM_TERM_G34
+      PSC_TBL_OR_LRDIMM3_DRAM_TERM_C32
+      PSC_TBL_OR_LRDIMM3_DRAM_TERM_G34
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblODTPatArrayOR[] = {
+      PSC_TBL_OR_UDIMM3_ODT_PAT_1D_AM3
+      PSC_TBL_OR_UDIMM3_ODT_PAT____AM3
+      PSC_TBL_OR_UDIMM3_ODT_PAT_3D_AM3
+      PSC_TBL_OR_RDIMM3_ODT_PAT_1D_AM3
+      PSC_TBL_OR_RDIMM3_ODT_PAT____AM3
+      PSC_TBL_OR_RDIMM3_ODT_PAT_3D_AM3
+      PSC_TBL_OR_UDIMM3_ODT_PAT_1D_C32
+      PSC_TBL_OR_UDIMM3_ODT_PAT____C32
+      PSC_TBL_OR_UDIMM3_ODT_PAT_3D_C32
+      PSC_TBL_OR_RDIMM3_ODT_PAT_1D_C32
+      PSC_TBL_OR_RDIMM3_ODT_PAT____C32
+      PSC_TBL_OR_RDIMM3_ODT_PAT_3D_C32
+      PSC_TBL_OR_LRDIMM3_ODT_PAT_1D_C32
+      PSC_TBL_OR_LRDIMM3_ODT_PAT____C32
+      PSC_TBL_OR_LRDIMM3_ODT_PAT_3D_C32
+      PSC_TBL_OR_UDIMM3_ODT_PAT_1D_G34
+      PSC_TBL_OR_UDIMM3_ODT_PAT____G34
+      PSC_TBL_OR_UDIMM3_ODT_PAT_3D_G34
+      PSC_TBL_OR_RDIMM3_ODT_PAT_1D_G34
+      PSC_TBL_OR_RDIMM3_ODT_PAT____G34
+      PSC_TBL_OR_RDIMM3_ODT_PAT_3D_G34
+      PSC_TBL_OR_LRDIMM3_ODT_PAT_1D_G34
+      PSC_TBL_OR_LRDIMM3_ODT_PAT____G34
+      PSC_TBL_OR_LRDIMM3_ODT_PAT_3D_G34
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblSAOArrayOR[] = {
+      PSC_TBL_OR_UDIMM3_SAO_AM3
+      PSC_TBL_OR_UDIMM3_SAO_C32
+      PSC_TBL_OR_UDIMM3_SAO_G34
+      PSC_TBL_OR_RDIMM3_SAO_AM3
+      PSC_TBL_OR_RDIMM3_SAO_C32
+      PSC_TBL_OR_RDIMM3_SAO_G34
+      PSC_TBL_OR_LRDIMM3_SAO_C32
+      PSC_TBL_OR_LRDIMM3_SAO_G34
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblS__ArrayOR[] = {
+      PSC_TBL_OR_UDIMM3_S___AM3
+      PSC_TBL_OR_UDIMM3_S___C32
+      PSC_TBL_OR_UDIMM3_S___G34
+      PSC_TBL_OR_RDIMM3_S___AM3
+      PSC_TBL_OR_RDIMM3_S___C32
+      PSC_TBL_OR_RDIMM3_S___G34
+      PSC_TBL_OR_LRDIMM3_S___C32
+      PSC_TBL_OR_LRDIMM3_S___G34
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblMR0WRArrayOR[] = {
+      PSC_TBL_OR_MR0_WR
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblMR0CLArrayOR[] = {
+      PSC_TBL_OR_MR0_CL
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblRC2IBTArrayOR[] = {
+      PSC_TBL_OR_RDIMM3_RC2IBT_AM3
+      PSC_TBL_OR_RDIMM3_RC2IBT_C32
+      PSC_TBL_OR_RDIMM3_RC2IBT_G34
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblRC10OPSPDArrayOR[] = {
+      PSC_TBL_OR_RDIMM3_RC10OPSPD_AM3
+      PSC_TBL_OR_RDIMM3_RC10OPSPD_C32
+      PSC_TBL_OR_RDIMM3_RC10OPSPD_G34
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblLRIBTArrayOR[] = {
+      PSC_TBL_OR_LRDIMM3_IBT_C32
+      PSC_TBL_OR_LRDIMM3_IBT_G34
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblGenArrayOR[] = {
+      PSC_TBL_OR_UDIMM3_CLK_DIS_AM3
+      PSC_TBL_OR_UDIMM3_CLK_DIS_C32
+      PSC_TBL_OR_UDIMM3_CLK_DIS_3D_C32
+      PSC_TBL_OR_UDIMM3_CLK_DIS_G34
+      PSC_TBL_OR_RDIMM3_CLK_DIS_C32
+      PSC_TBL_OR_RDIMM3_CLK_DIS_G34
+      PSC_TBL_OR_LRDIMM3_CLK_DIS_C32
+      PSC_TBL_OR_LRDIMM3_CLK_DIS_G34
+      PSC_TBL_OR_CKE_TRI
+      PSC_TBL_OR_ODT_TRI_3D
+      PSC_TBL_OR_ODT_TRI
+      PSC_TBL_OR_LRDIMM3_ODT_TRI_3D
+      PSC_TBL_OR_LRDIMM3_ODT_TRI
+      PSC_TBL_OR_UDIMM3_CS_TRI
+      PSC_TBL_OR_CS_TRI
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblWLSeedArrayOR[] = {
+      PSC_TBL_OR_UDIMM3_WL_SEED_AM3
+      PSC_TBL_OR_UDIMM3_WL_SEED_C32
+      PSC_TBL_OR_UDIMM3_WL_SEED_G34
+      PSC_TBL_OR_RDIMM3_WL_SEED_AM3
+      PSC_TBL_OR_RDIMM3_WL_SEED_C32
+      PSC_TBL_OR_RDIMM3_WL_SEED_G34
+      PSC_TBL_OR_LRDIMM3_WL_SEED_AM3
+      PSC_TBL_OR_LRDIMM3_WL_SEED_C32
+      PSC_TBL_OR_LRDIMM3_WL_SEED_G34
+      PSC_TBL_END
+    };
+
+    PSC_TBL_ENTRY* memPSCTblHWRxEnSeedArrayOR[] = {
+      PSC_TBL_OR_UDIMM3_HWRXEN_SEED_AM3
+      PSC_TBL_OR_UDIMM3_HWRXEN_SEED_C32
+      PSC_TBL_OR_UDIMM3_HWRXEN_SEED_G34
+      PSC_TBL_OR_RDIMM3_HWRXEN_SEED_AM3
+      PSC_TBL_OR_RDIMM3_HWRXEN_SEED_C32
+      PSC_TBL_OR_RDIMM3_HWRXEN_SEED_G34
+      PSC_TBL_OR_LRDIMM3_HWRXEN_SEED_AM3
+      PSC_TBL_OR_LRDIMM3_HWRXEN_SEED_C32
+      PSC_TBL_OR_LRDIMM3_HWRXEN_SEED_G34
+      PSC_TBL_END
+    };
+
+    MEM_PSC_TABLE_BLOCK memPSCTblBlockOr = {
+      (PSC_TBL_ENTRY **)&memPSCTblMaxFreqArrayOR,
+      (PSC_TBL_ENTRY **)&memPSCTblDramTermArrayOR,
+      (PSC_TBL_ENTRY **)&memPSCTblODTPatArrayOR,
+      (PSC_TBL_ENTRY **)&memPSCTblSAOArrayOR,
+      (PSC_TBL_ENTRY **)&memPSCTblMR0WRArrayOR,
+      (PSC_TBL_ENTRY **)&memPSCTblMR0CLArrayOR,
+      (PSC_TBL_ENTRY **)&memPSCTblRC2IBTArrayOR,
+      (PSC_TBL_ENTRY **)&memPSCTblRC10OPSPDArrayOR,
+      (PSC_TBL_ENTRY **)&memPSCTblLRIBTArrayOR,
+      NULL,
+      NULL,
+      (PSC_TBL_ENTRY **)&memPSCTblGenArrayOR,
+      (PSC_TBL_ENTRY **)&memPSCTblS__ArrayOR,
+      (PSC_TBL_ENTRY **)&memPSCTblWLSeedArrayOR,
+      (PSC_TBL_ENTRY **)&memPSCTblHWRxEnSeedArrayOR
+    };
+
+    extern MEM_PSC_FLOW MemPGetMaxFreqSupported;
+    #define PSC_FLOW_OR_MAX_FREQ   MemPGetMaxFreqSupported
+    extern MEM_PSC_FLOW MemPGetRttNomWr;
+    #define PSC_FLOW_OR_DRAM_TERM   MemPGetRttNomWr
+    extern MEM_PSC_FLOW MemPGetODTPattern;
+    #define PSC_FLOW_OR_ODT_PATTERN   MemPGetODTPattern
+    extern MEM_PSC_FLOW MemPGetSAO;
+    #define PSC_FLOW_OR_SAO   MemPGetSAO
+    extern MEM_PSC_FLOW MemPGetMR0WrCL;
+    #define PSC_FLOW_OR_MR0_WRCL   MemPGetMR0WrCL
+    extern MEM_PSC_FLOW MemPGetS__;
+    #define PSC_FLOW_OR_S__   MemPGetS__
+    extern MEM_PSC_FLOW MemPGetTrainingSeeds;
+    #define PSC_FLOW_OR_SEED MemPGetTrainingSeeds
+    #if OPTION_RDIMMS
+      extern MEM_PSC_FLOW MemPGetRC2IBT;
+      #define PSC_FLOW_OR_RC2_IBT    MemPGetRC2IBT
+      extern MEM_PSC_FLOW MemPGetRC10OpSpd;
+      #define PSC_FLOW_OR_RC10_OPSPD   MemPGetRC10OpSpd
+    #endif
+    #if OPTION_LRDIMMS
+      extern MEM_PSC_FLOW MemPGetLRIBT;
+      #define PSC_FLOW_OR_LR_IBT   MemPGetLRIBT
+      extern MEM_PSC_FLOW MemPGetLRNPR;
+      #define PSC_FLOW_OR_LR_NPR   MemPGetLRNPR
+      extern MEM_PSC_FLOW MemPGetLRNLR;
+      #define PSC_FLOW_OR_LR_NLR  MemPGetLRNLR
+    #endif
+    #ifndef PSC_FLOW_OR_MAX_FREQ
+      #define PSC_FLOW_OR_MAX_FREQ   MEM_PSC_FLOW_DEFTRUE
+    #endif
+    #ifndef PSC_FLOW_OR_DRAM_TERM
+      #define PSC_FLOW_OR_DRAM_TERM   MEM_PSC_FLOW_DEFTRUE
+    #endif
+    #ifndef PSC_FLOW_OR_ODT_PATTERN
+      #define PSC_FLOW_OR_ODT_PATTERN   MEM_PSC_FLOW_DEFTRUE
+    #endif
+    #ifndef PSC_FLOW_OR_SAO
+      #define PSC_FLOW_OR_SAO   MEM_PSC_FLOW_DEFTRUE
+    #endif
+    #ifndef PSC_FLOW_OR_MR0_WRCL
+      #define PSC_FLOW_OR_MR0_WRCL   MEM_PSC_FLOW_DEFTRUE
+    #endif
+    #ifndef PSC_FLOW_OR_RC2_IBT
+      #define PSC_FLOW_OR_RC2_IBT   MEM_PSC_FLOW_DEFTRUE
+    #endif
+    #ifndef PSC_FLOW_OR_RC10_OPSPD
+      #define PSC_FLOW_OR_RC10_OPSPD   MEM_PSC_FLOW_DEFTRUE
+    #endif
+    #ifndef PSC_FLOW_OR_LR_IBT
+      #define PSC_FLOW_OR_LR_IBT   MEM_PSC_FLOW_DEFTRUE
+    #endif
+    #ifndef PSC_FLOW_OR_LR_NPR
+      #define PSC_FLOW_OR_LR_NPR   MEM_PSC_FLOW_DEFTRUE
+    #endif
+    #ifndef PSC_FLOW_OR_LR_NLR
+      #define PSC_FLOW_OR_LR_NLR   MEM_PSC_FLOW_DEFTRUE
+  #endif
+    #ifndef PSC_FLOW_OR_S__
+      #define PSC_FLOW_OR_S__   MEM_PSC_FLOW_DEFTRUE
+    #endif
+    #ifndef PSC_FLOW_OR_SEED
+      #define PSC_FLOW_OR_SEED   MEM_PSC_FLOW_DEFTRUE
+    #endif
+
+    MEM_PSC_FLOW_BLOCK memPlatSpecFlowOR = {
+      &memPSCTblBlockOr,
+      PSC_FLOW_OR_MAX_FREQ,
+      PSC_FLOW_OR_DRAM_TERM,
+      PSC_FLOW_OR_ODT_PATTERN,
+      PSC_FLOW_OR_SAO,
+      PSC_FLOW_OR_MR0_WRCL,
+      PSC_FLOW_OR_RC2_IBT,
+      PSC_FLOW_OR_RC10_OPSPD,
+      PSC_FLOW_OR_LR_IBT,
+      PSC_FLOW_OR_LR_NPR,
+      PSC_FLOW_OR_LR_NLR,
+      PSC_FLOW_OR_S__,
+      PSC_FLOW_OR_SEED
+    };
+    #define MEM_PSC_FLOW_BLOCK_OR &memPlatSpecFlowOR,
+  #else
+    #define MEM_PSC_FLOW_BLOCK_OR
+  #endif
+
+  MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[] = {
+    MEM_PSC_FLOW_BLOCK_OR
+    MEM_PSC_FLOW_BLOCK_END
+  };
+
+  /*---------------------------------------------------------------------------------------------------
+  *
+  *  LRDIMM CONTROL
+  *
+  *---------------------------------------------------------------------------------------------------
+  */
+  #if (OPTION_LRDIMMS == TRUE)
+    #if ((OPTION_MEMCTLR_OR == TRUE))
+      #define MEM_TECH_FEATURE_LRDIMM_INIT  &MemTLrdimmConstructor3
+    #else //#if ((OPTION_MEMCTLR_OR == FALSE))
+      #define MEM_TECH_FEATURE_LRDIMM_INIT    MemTFeatDef
+    #endif
+  #else //#if (OPTION_LRDIMMS == FALSE)
+    #define MEM_TECH_FEATURE_LRDIMM_INIT    MemTFeatDef
+  #endif
+  MEM_TECH_LRDIMM memLrdimmSupported = {
+    MEM_TECH_LRDIMM_STRUCT_VERSION,
+    MEM_TECH_FEATURE_LRDIMM_INIT
+  };
+#else
+  /*---------------------------------------------------------------------------------------------------
+   * MAIN FLOW CONTROL
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  MEM_FLOW_CFG* memFlowControlInstalled[] = {
+    NULL
+  };
+  /*---------------------------------------------------------------------------------------------------
+   * NB TRAINING FLOW CONTROL
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  OPTION_MEM_FEATURE_NB* memNTrainFlowControl[] = {    // Training flow control
+    NULL
+  };
+  /*---------------------------------------------------------------------------------------------------
+   * DEFAULT TECHNOLOGY BLOCK
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  MEM_TECH_CONSTRUCTOR* memTechInstalled[] = {    // Types of technology installed
+    NULL
+  };
+
+  /*---------------------------------------------------------------------------------------------------
+   * DEFAULT TECHNOLOGY MAP
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  UINT8 MemoryTechnologyMap[MAX_SOCKETS_SUPPORTED] = {0, 0, 0, 0, 0, 0, 0, 0};
+
+  /*---------------------------------------------------------------------------------------------------
+   * DEFAULT MAIN FEATURE BLOCK
+   *---------------------------------------------------------------------------------------------------
+   */
+  MEM_FEAT_BLOCK_MAIN MemFeatMain = {
+    NULL
+  };
+
+  /*---------------------------------------------------------------------------------------------------
+   * DEFAULT NORTHBRIDGE SUPPORT LIST
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  #if (OPTION_MEMCTLR_DR == TRUE)
+    #undef MEM_NB_SUPPORT_DR
+    #define MEM_NB_SUPPORT_DR { MEM_NB_SUPPORT_STRUCT_VERSION, NULL, NULL, NULL, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_DR, MEM_IDENDIMM_DR },
+  #endif
+  #if (OPTION_MEMCTLR_RB == TRUE)
+    #undef MEM_NB_SUPPORT_RB
+    #define MEM_NB_SUPPORT_RB { MEM_NB_SUPPORT_STRUCT_VERSION, NULL, NULL, NULL, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_RB, MEM_IDENDIMM_RB },
+  #endif
+  #if (OPTION_MEMCTLR_DA == TRUE)
+    #undef MEM_NB_SUPPORT_DA
+    #define MEM_NB_SUPPORT_DA { MEM_NB_SUPPORT_STRUCT_VERSION, NULL, NULL, NULL, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_DA, MEM_IDENDIMM_DA },
+  #endif
+  #if (OPTION_MEMCTLR_PH == TRUE)
+    #undef MEM_NB_SUPPORT_PH
+    #define MEM_NB_SUPPORT_PH { MEM_NB_SUPPORT_STRUCT_VERSION, NULL, NULL, NULL, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_PH, MEM_IDENDIMM_PH },
+  #endif
+  #if (OPTION_MEMCTLR_HY == TRUE)
+    #undef MEM_NB_SUPPORT_HY
+    #define MEM_NB_SUPPORT_HY { MEM_NB_SUPPORT_STRUCT_VERSION, NULL, NULL, NULL, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_HY, MEM_IDENDIMM_HY },
+  #endif
+  #if (OPTION_MEMCTLR_C32 == TRUE)
+    #undef MEM_NB_SUPPORT_C32
+    #define MEM_NB_SUPPORT_C32 { MEM_NB_SUPPORT_STRUCT_VERSION, NULL, NULL, NULL, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_C32, MEM_IDENDIMM_C32 },
+  #endif
+  #if (OPTION_MEMCTLR_OR == TRUE)
+    #undef MEM_NB_SUPPORT_OR
+    #define MEM_NB_SUPPORT_OR { MEM_NB_SUPPORT_STRUCT_VERSION, NULL, NULL, NULL, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_OR, MEM_IDENDIMM_OR },
+  #endif
+  /*---------------------------------------------------------------------------------------------------
+   * DEFAULT Technology Training
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  #if OPTION_DDR2
+    MEM_TECH_FEAT_BLOCK  memTechTrainingFeatDDR2 = {
+      NULL
+    };
+    MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR2[] = {
+      NULL
+    };
+  #endif
+  #if OPTION_DDR3
+    MEM_TECH_FEAT_BLOCK  memTechTrainingFeatDDR3 = {
+      NULL
+    };
+    MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR3[] = {
+      NULL
+    };
+  #endif
+    /*---------------------------------------------------------------------------------------------------
+     * DEFAULT Platform Specific list
+     *
+     *
+     *---------------------------------------------------------------------------------------------------
+     */
+  #if (OPTION_MEMCTLR_DR == TRUE)
+    MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledDr[MAX_FF_TYPES] = {
+      NULL
+    };
+  #endif
+  #if (OPTION_MEMCTLR_RB == TRUE)
+    MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledRb[MAX_FF_TYPES] = {
+      NULL
+    };
+  #endif
+  #if (OPTION_MEMCTLR_DA == TRUE)
+    MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledDA[MAX_FF_TYPES] = {
+      NULL
+    };
+  #endif
+  #if (OPTION_MEMCTLR_Ni == TRUE)
+    MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledNi[MAX_FF_TYPES] = {
+      NULL
+    };
+  #endif
+  #if (OPTION_MEMCTLR_PH == TRUE)
+    MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledPh[MAX_FF_TYPES] = {
+      NULL
+    };
+  #endif
+  #if (OPTION_MEMCTLR_HY == TRUE)
+    MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledHy[MAX_FF_TYPES] = {
+      NULL
+    };
+  #endif
+  #if (OPTION_MEMCTLR_OR == TRUE)
+    MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledOr[MAX_FF_TYPES] = {
+      NULL
+    };
+  #endif
+  #if (OPTION_MEMCTLR_C32 == TRUE)
+    MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledC32[MAX_FF_TYPES] = {
+      NULL
+    };
+  #endif
+  /*----------------------------------------------------------------------
+   * DEFAULT PSCFG DEFINITIONS
+   *
+   *----------------------------------------------------------------------
+   */
+  MEM_PLATFORM_CFG* memPlatformTypeInstalled[] = {
+    NULL
+  };
+
+  /*----------------------------------------------------------------------
+   * EXTRACTABLE PLATFORM SPECIFIC CONFIGURATION
+   *
+   *----------------------------------------------------------------------
+   */
+  MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[] = {
+    NULL
+  };
+
+  MEM_TECH_LRDIMM memLrdimmSupported = {
+    MEM_TECH_LRDIMM_STRUCT_VERSION,
+    NULL
+  };
+#endif
+
+/*---------------------------------------------------------------------------------------------------
+ * NORTHBRIDGE SUPPORT LIST
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+MEM_NB_SUPPORT memNBInstalled[] = {
+  MEM_NB_SUPPORT_RB
+  MEM_NB_SUPPORT_DA
+  MEM_NB_SUPPORT_Ni
+  MEM_NB_SUPPORT_PH
+  MEM_NB_SUPPORT_HY
+  MEM_NB_SUPPORT_OR
+  MEM_NB_SUPPORT_C32
+  MEM_NB_SUPPORT_END
+};
+
+#endif  // _OPTION_MEMORY_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionMemoryRecovery.h b/src/vendorcode/amd/agesa/f15/Include/OptionMemoryRecovery.h
new file mode 100644
index 0000000000..6153aea41e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionMemoryRecovery.h
@@ -0,0 +1,63 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Memory option API.
+ *
+ * Contains structures and values used to control the Memory option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_MEMORY_RECOVERY_H_
+#define _OPTION_MEMORY_RECOVERY_H_
+
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+
+typedef BOOLEAN MEM_REC_NB_CONSTRUCTOR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+typedef VOID MEM_REC_TECH_CONSTRUCTOR (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   MEM_NB_BLOCK   *NBPtr
+  );
+
+#endif  // _OPTION_MEMORY_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionMemoryRecoveryInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionMemoryRecoveryInstall.h
new file mode 100644
index 0000000000..f5dea81d33
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionMemoryRecoveryInstall.h
@@ -0,0 +1,263 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Memory
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 54577 $   @e \$Date: 2011-06-09 04:28:28 -0600 (Thu, 09 Jun 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_MEMORY_RECOVERY_INSTALL_H_
+#define _OPTION_MEMORY_RECOVERY_INSTALL_H_
+
+#if (AGESA_ENTRY_INIT_RECOVERY == TRUE)
+
+  #if (OPTION_MEMCTLR_DR == TRUE)
+    extern MEM_REC_NB_CONSTRUCTOR MemRecConstructNBBlockDR;
+    #define MEM_REC_NB_SUPPORT_DR MemRecConstructNBBlockDR,
+  #else
+    #define MEM_REC_NB_SUPPORT_DR
+  #endif
+  #if (OPTION_MEMCTLR_RB == TRUE)
+    extern MEM_REC_NB_CONSTRUCTOR MemRecConstructNBBlockRb;
+    #define MEM_REC_NB_SUPPORT_RB MemRecConstructNBBlockRb,
+  #else
+    #define MEM_REC_NB_SUPPORT_RB
+  #endif
+  #if (OPTION_MEMCTLR_DA == TRUE)
+    extern MEM_REC_NB_CONSTRUCTOR MemRecConstructNBBlockDA;
+    #define MEM_REC_NB_SUPPORT_DA MemRecConstructNBBlockDA,
+  #else
+    #define MEM_REC_NB_SUPPORT_DA
+  #endif
+  #if (OPTION_MEMCTLR_NI == TRUE)
+    extern MEM_REC_NB_CONSTRUCTOR MemRecConstructNBBlockNi;
+    #define MEM_REC_NB_SUPPORT_NI MemRecConstructNBBlockNi,
+  #else
+    #define MEM_REC_NB_SUPPORT_NI
+  #endif
+  #if (OPTION_MEMCTLR_PH == TRUE)
+    extern MEM_REC_NB_CONSTRUCTOR MemRecConstructNBBlockPh;
+    #define MEM_REC_NB_SUPPORT_PH MemRecConstructNBBlockPh,
+  #else
+    #define MEM_REC_NB_SUPPORT_PH
+  #endif
+  #if (OPTION_MEMCTLR_HY == TRUE)
+    extern MEM_REC_NB_CONSTRUCTOR MemRecConstructNBBlockHY;
+    #define MEM_REC_NB_SUPPORT_HY MemRecConstructNBBlockHY,
+  #else
+    #define MEM_REC_NB_SUPPORT_HY
+  #endif
+  #if (OPTION_MEMCTLR_C32 == TRUE)
+    extern MEM_REC_NB_CONSTRUCTOR MemRecConstructNBBlockC32;
+    #define MEM_REC_NB_SUPPORT_C32 MemRecConstructNBBlockC32,
+  #else
+    #define MEM_REC_NB_SUPPORT_C32
+  #endif
+  #if (OPTION_MEMCTLR_OR == TRUE)
+    extern MEM_REC_NB_CONSTRUCTOR MemRecConstructNBBlockOr;
+    #define MEM_REC_NB_SUPPORT_OR MemRecConstructNBBlockOr,
+  #else
+    #define MEM_REC_NB_SUPPORT_OR
+  #endif
+
+  MEM_REC_NB_CONSTRUCTOR* MemRecNBInstalled[] = {
+    MEM_REC_NB_SUPPORT_DR
+    MEM_REC_NB_SUPPORT_RB
+    MEM_REC_NB_SUPPORT_DA
+    MEM_REC_NB_SUPPORT_PH
+    MEM_REC_NB_SUPPORT_HY
+    MEM_REC_NB_SUPPORT_C32
+    MEM_REC_NB_SUPPORT_OR
+    MEM_REC_NB_SUPPORT_NI
+    NULL
+  };
+
+  #define MEM_REC_TECH_CONSTRUCTOR_DDR2
+  #if (OPTION_DDR3 == TRUE)
+    extern MEM_REC_TECH_CONSTRUCTOR MemRecConstructTechBlock3;
+    #define MEM_REC_TECH_CONSTRUCTOR_DDR3 MemRecConstructTechBlock3,
+  #else
+    #define MEM_REC_TECH_CONSTRUCTOR_DDR3
+  #endif
+
+  MEM_REC_TECH_CONSTRUCTOR* MemRecTechInstalled[] = {
+    MEM_REC_TECH_CONSTRUCTOR_DDR3
+    MEM_REC_TECH_CONSTRUCTOR_DDR2
+    NULL
+  };
+
+  #if OPTION_MEMCTLR_DR
+    #define PSC_REC_DR_UDIMM_DDR2
+    #define PSC_REC_DR_UDIMM_DDR3    MemRecNGetPsCfgUDIMM3Nb,
+    #define PSC_REC_DR_RDIMM_DDR2
+    #define PSC_REC_DR_RDIMM_DDR3    MemRecNGetPsCfgRDIMM3Nb,
+    #define PSC_REC_DR_SODIMM_DDR2
+    #define PSC_REC_DR_SODIMM_DDR3    MemRecNGetPsCfgSODIMM3Nb,
+  #endif
+  #if ((OPTION_MEMCTLR_DA == TRUE) || (OPTION_MEMCTLR_Ni == TRUE) || (OPTION_MEMCTLR_PH == TRUE) || (OPTION_MEMCTLR_RB == TRUE))
+    #define PSC_REC_DA_UDIMM_DDR3    MemRecNGetPsCfgUDIMM3Nb,
+    #define PSC_REC_DA_SODIMM_DDR2
+    #define PSC_REC_DA_SODIMM_DDR3    MemRecNGetPsCfgSODIMM3Nb,
+  #endif
+  #if OPTION_MEMCTLR_HY
+    #define PSC_REC_HY_UDIMM_DDR3    MemRecNGetPsCfgUDIMM3Nb,
+    #define PSC_REC_HY_RDIMM_DDR3    MemRecNGetPsCfgRDIMM3Nb,
+  #endif
+  #if OPTION_MEMCTLR_C32
+    #define PSC_REC_C32_UDIMM_DDR3    MemRecNGetPsCfgUDIMM3Nb,
+    #define PSC_REC_C32_RDIMM_DDR3    MemRecNGetPsCfgRDIMM3Nb,
+  #endif
+  #if OPTION_MEMCTLR_OR
+    #define PSC_REC_OR_UDIMM_DDR3    //MemRecNGetPsCfgUDIMM3OR,
+    #define PSC_REC_OR_RDIMM_DDR3    //MemRecNGetPsCfgRDIMM3OR,
+  #endif
+
+  #ifndef PSC_REC_DR_UDIMM_DDR2
+    #define PSC_REC_DR_UDIMM_DDR2
+  #endif
+  #ifndef PSC_REC_DR_UDIMM_DDR3
+    #define PSC_REC_DR_UDIMM_DDR3
+  #endif
+  #ifndef PSC_REC_DR_RDIMM_DDR2
+    #define PSC_REC_DR_RDIMM_DDR2
+  #endif
+  #ifndef PSC_REC_DR_RDIMM_DDR3
+    #define PSC_REC_DR_RDIMM_DDR3
+  #endif
+  #ifndef PSC_REC_DR_SODIMM_DDR2
+    #define PSC_REC_DR_SODIMM_DDR2
+  #endif
+  #ifndef PSC_REC_DR_SODIMM_DDR3
+    #define PSC_REC_DR_SODIMM_DDR3
+  #endif
+  #ifndef PSC_REC_DA_UDIMM_DDR3
+    #define PSC_REC_DA_UDIMM_DDR3
+  #endif
+  #ifndef PSC_REC_DA_SODIMM_DDR2
+    #define PSC_REC_DA_SODIMM_DDR2
+  #endif
+  #ifndef PSC_REC_DA_SODIMM_DDR3
+    #define PSC_REC_DA_SODIMM_DDR3
+  #endif
+  #ifndef PSC_REC_HY_UDIMM_DDR3
+    #define PSC_REC_HY_UDIMM_DDR3
+  #endif
+  #ifndef PSC_REC_HY_RDIMM_DDR3
+    #define PSC_REC_HY_RDIMM_DDR3
+  #endif
+  #ifndef PSC_REC_C32_UDIMM_DDR3
+    #define PSC_REC_C32_UDIMM_DDR3
+  #endif
+  #ifndef PSC_REC_C32_RDIMM_DDR3
+    #define PSC_REC_C32_RDIMM_DDR3
+  #endif
+  #ifndef PSC_REC_OR_UDIMM_DDR3
+    #define PSC_REC_OR_UDIMM_DDR3
+  #endif
+  #ifndef PSC_REC_OR_RDIMM_DDR3
+    #define PSC_REC_OR_RDIMM_DDR3
+  #endif
+
+  MEM_PLATFORM_CFG* memRecPlatformTypeInstalled[] = {
+    PSC_REC_DR_UDIMM_DDR2
+    PSC_REC_DR_RDIMM_DDR2
+    PSC_REC_DR_SODIMM_DDR2
+    PSC_REC_DR_UDIMM_DDR3
+    PSC_REC_DR_RDIMM_DDR3
+    PSC_REC_DR_SODIMM_DDR3
+    PSC_REC_DA_SODIMM_DDR2
+    PSC_REC_DA_UDIMM_DDR3
+    PSC_REC_DA_SODIMM_DDR3
+    PSC_REC_HY_UDIMM_DDR3
+    PSC_REC_HY_RDIMM_DDR3
+    PSC_REC_C32_UDIMM_DDR3
+    PSC_REC_C32_RDIMM_DDR3
+    PSC_REC_OR_UDIMM_DDR3
+    PSC_REC_OR_RDIMM_DDR3
+    NULL
+  };
+
+  /*---------------------------------------------------------------------------------------------------
+   * EXTRACTABLE PLATFORM SPECIFIC CONFIGURATION
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  #define MEM_PSC_REC_FLOW_BLOCK_END NULL
+  #define PSC_REC_TBL_END NULL
+  #define MEM_REC_PSC_FLOW_DEFTRUE (BOOLEAN (*) (MEM_NB_BLOCK*, MEM_PSC_TABLE_BLOCK *)) MemRecDefTrue
+
+
+#else
+  /*---------------------------------------------------------------------------------------------------
+   * DEFAULT TECHNOLOGY BLOCK
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  MEM_TECH_CONSTRUCTOR* MemRecTechInstalled[] = {    // Types of technology installed
+    NULL
+  };
+  /*---------------------------------------------------------------------------------------------------
+   * DEFAULT NORTHBRIDGE SUPPORT LIST
+   *
+   *
+   *---------------------------------------------------------------------------------------------------
+   */
+  MEM_REC_NB_CONSTRUCTOR* MemRecNBInstalled[] = {
+    NULL
+  };
+  /*----------------------------------------------------------------------
+   * DEFAULT PSCFG DEFINITIONS
+   *
+   *----------------------------------------------------------------------
+   */
+  MEM_PLATFORM_CFG* memRecPlatformTypeInstalled[] = {
+    NULL
+  };
+  /*----------------------------------------------------------------------
+   * EXTRACTABLE PLATFORM SPECIFIC CONFIGURATION
+   *
+   *----------------------------------------------------------------------
+   */
+  MEM_PSC_FLOW_BLOCK* memRecPlatSpecFlowArray[] = {
+    NULL
+  };
+#endif
+#endif  // _OPTION_MEMORY_RECOVERY_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionMsgBasedC1eInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionMsgBasedC1eInstall.h
new file mode 100644
index 0000000000..a64321ef38
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionMsgBasedC1eInstall.h
@@ -0,0 +1,116 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Message-Based C1e
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 56186 $   @e \$Date: 2011-07-08 15:35:23 -0600 (Fri, 08 Jul 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_MSG_BASED_C1E_INSTALL_H_
+#define _OPTION_MSG_BASED_C1E_INSTALL_H_
+
+#include "cpuMsgBasedC1e.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_MSG_BASED_C1E_FEAT
+#define F10_MSG_BASED_C1E_SUPPORT
+#define F15_OR_MSG_BASED_C1E_SUPPORT
+#if OPTION_MSG_BASED_C1E == TRUE
+  #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE)
+    extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureMsgBasedC1e;
+
+    #ifdef OPTION_FAMILY10H
+      #if OPTION_FAMILY10H == TRUE
+        #if OPTION_FAMILY10H_HY == TRUE
+          #if (OPTION_G34_SOCKET_SUPPORT == TRUE) || (OPTION_C32_SOCKET_SUPPORT == TRUE)
+            #undef OPTION_MSG_BASED_C1E_FEAT
+            #define OPTION_MSG_BASED_C1E_FEAT &CpuFeatureMsgBasedC1e,
+          #endif
+        #endif
+      #endif
+    #endif
+
+    #ifdef OPTION_FAMILY15H_OR
+      #if OPTION_FAMILY15H_OR == TRUE
+        #if (OPTION_G34_SOCKET_SUPPORT == TRUE) || (OPTION_C32_SOCKET_SUPPORT == TRUE || OPTION_AM3_SOCKET_SUPPORT == TRUE)
+          #undef OPTION_MSG_BASED_C1E_FEAT
+          #define OPTION_MSG_BASED_C1E_FEAT &CpuFeatureMsgBasedC1e,
+        #endif
+      #endif
+    #endif
+
+    #ifdef OPTION_FAMILY10H
+      #if OPTION_FAMILY10H == TRUE
+        #if OPTION_FAMILY10H_HY == TRUE
+          #if (OPTION_G34_SOCKET_SUPPORT == TRUE) || (OPTION_C32_SOCKET_SUPPORT == TRUE)
+            extern CONST MSG_BASED_C1E_FAMILY_SERVICES ROMDATA F10MsgBasedC1e;
+            #undef F10_MSG_BASED_C1E_SUPPORT
+            #define F10_MSG_BASED_C1E_SUPPORT {AMD_FAMILY_10_HY, &F10MsgBasedC1e},
+          #endif
+        #endif
+      #endif
+    #endif
+
+    #ifdef OPTION_FAMILY15H_OR
+      #if OPTION_FAMILY15H_OR == TRUE
+        #if (OPTION_G34_SOCKET_SUPPORT == TRUE) || (OPTION_C32_SOCKET_SUPPORT == TRUE || OPTION_AM3_SOCKET_SUPPORT == TRUE)
+          extern CONST MSG_BASED_C1E_FAMILY_SERVICES ROMDATA F15OrMsgBasedC1e;
+          #undef F15_OR_MSG_BASED_C1E_SUPPORT
+          #define F15_OR_MSG_BASED_C1E_SUPPORT {AMD_FAMILY_15_OR, &F15OrMsgBasedC1e},
+        #endif
+      #endif
+    #endif
+
+    CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA MsgBasedC1eFamilyServiceArray[] =
+    {
+      F10_MSG_BASED_C1E_SUPPORT
+      F15_OR_MSG_BASED_C1E_SUPPORT
+      {0, NULL}
+    };
+    CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA MsgBasedC1eFamilyServiceTable =
+    {
+      (sizeof (MsgBasedC1eFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+      &MsgBasedC1eFamilyServiceArray[0]
+    };
+  #endif
+#endif
+#endif  // _OPTION_MSG_BASED_C1E_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionMultiSocket.h b/src/vendorcode/amd/agesa/f15/Include/OptionMultiSocket.h
new file mode 100644
index 0000000000..493e46eb98
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionMultiSocket.h
@@ -0,0 +1,214 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Multi-socket option API.
+ *
+ * Contains structures and values used to control the multi-socket option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 51891 $   @e \$Date: 2011-04-28 12:39:55 -0600 (Thu, 28 Apr 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_MULTISOCKET_H_
+#define _OPTION_MULTISOCKET_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * This function loops through all possible socket locations, gathering the number
+ * of power management steps each populated socket requires, and returns the
+ * highest number.
+ *
+ * @param[out] NumSystemSteps    Maximum number of system steps required
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+typedef VOID OPTION_MULTISOCKET_PM_STEPS (
+     OUT   UINT8 *NumSystemSteps,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * This function loops through all possible socket locations, starting core 0 of
+ * each populated socket to perform the passed in AP_TASK.  After starting all
+ * other core 0s, the BSC will perform the AP_TASK as well.  This must be run by
+ * the system BSC only.
+ *
+ * @param[in]  TaskPtr           Function descriptor
+ * @param[in]  StdHeader         Config handle for library and services
+ * @param[in]  ConfigParams      AMD entry point's CPU parameter structure
+ *
+ */
+typedef VOID OPTION_MULTISOCKET_PM_CORE0_TASK (
+  IN       VOID *TaskPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       VOID *ConfigParams
+  );
+
+/**
+ * This function loops through all possible socket locations, comparing the
+ * maximum NB frequencies to determine the slowest.  This function also
+ * determines if all coherent NB frequencies are equivalent.
+ *
+ * @param[in]  NbPstate                    NB P-state number to check (0 = fastest)
+ * @param[in]  PlatformConfig              Platform profile/build option config structure.
+ * @param[out] SystemNbCofNumerator        NB frequency numerator for the system in MHz
+ * @param[out] SystemNbCofDenominator      NB frequency denominator for the system
+ * @param[out] SystemNbCofsMatch           Whether or not all NB frequencies are equivalent
+ * @param[out] NbPstateIsEnabledOnAllCPUs  Whether or not NbPstate is valid on all CPUs
+ * @param[in]  StdHeader                   Config handle for library and services
+ *
+ * @retval     TRUE                        At least one processor has NbPstate enabled.
+ * @retval     FALSE                       NbPstate is disabled on all CPUs
+ */
+typedef BOOLEAN OPTION_MULTISOCKET_PM_NB_COF (
+  IN       UINT32 NbPstate,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+     OUT   UINT32 *SystemNbCofNumerator,
+     OUT   UINT32 *SystemNbCofDenominator,
+     OUT   BOOLEAN *SystemNbCofsMatch,
+     OUT   BOOLEAN *NbPstateIsEnabledOnAllCPUs,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * This function loops through all possible socket locations, checking whether
+ * any populated sockets require NB COF VID programming.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+typedef BOOLEAN OPTION_MULTISOCKET_PM_NB_COF_UPDATE (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * This function loops through all possible socket locations, collecting any
+ * power management initialization errors that may have occurred.  These errors
+ * are transferred from the core 0s of the socket in which the errors occurred
+ * to the BSC's heap.  The BSC's heap is then searched for the most severe error
+ * that occurred, and returns it.  This function must be called by the BSC only.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+typedef AGESA_STATUS OPTION_MULTISOCKET_PM_GET_EVENTS (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * This function loops through all possible socket locations and Nb Pstates,
+ * comparing the NB frequencies to determine the slowest NB P0 and NB Pmin in
+ * the system.
+ *
+ * @param[in]  PlatformConfig      Platform profile/build option config structure.
+ * @param[out] MinSysNbFreq        NB frequency numerator for the system in MHz
+ * @param[out] MinP0NbFreq         NB frequency numerator for P0 in MHz
+ * @param[in]  StdHeader           Config handle for library and services
+ */
+typedef VOID OPTION_MULTISOCKET_PM_NB_MIN_COF (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+     OUT   UINT32                 *MinSysNbFreq,
+     OUT   UINT32                 *MinP0NbFreq,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * This function returns the current running core's PCI Config Space address.
+ *
+ * @param[out]   PciAddress   The Processor's PCI Config Space address (Function 0, Register 0)
+ * @param[in]    StdHeader    Header for library and services.
+ */
+typedef BOOLEAN OPTION_MULTISOCKET_GET_PCI_ADDRESS (
+     OUT   PCI_ADDR               *PciAddress,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ *  This function writes to all nodes on the executing core's socket.
+ *
+ *  @param[in]     PciAddress    The Function and Register to update
+ *  @param[in]     Mask          The bitwise AND mask to apply to the current register value
+ *  @param[in]     Data          The bitwise OR mask to apply to the current register value
+ *  @param[in]     StdHeader     Header for library and services.
+ *
+ */
+typedef VOID OPTION_MULTISOCKET_MODIFY_CURR_SOCKET_PCI (
+  IN       PCI_ADDR               *PciAddress,
+  IN       UINT32                 Mask,
+  IN       UINT32                 Data,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+#define MULTISOCKET_STRUCT_VERSION  0x01
+
+/**
+ * Provide build configuration of cpu multi-socket or single socket support.
+ *
+ */
+typedef struct  {
+  UINT16              OptMultiSocketVersion;                       ///< Table version
+  OPTION_MULTISOCKET_PM_STEPS *GetNumberOfSystemPmSteps;           ///< Method: Get number of power mgt tasks
+  OPTION_MULTISOCKET_PM_CORE0_TASK *BscRunCodeOnAllSystemCore0s;   ///< Method: Perform tasks on Core 0 of each processor
+  OPTION_MULTISOCKET_PM_NB_COF *GetSystemNbPstateSettings;         ///< Method: Find the Northbridge frequency for the specified Nb Pstate in the system.
+  OPTION_MULTISOCKET_PM_NB_COF_UPDATE *GetSystemNbCofVidUpdate;    ///< Method: Determine if any Northbridges in the system need to update their COF/VID.
+  OPTION_MULTISOCKET_PM_GET_EVENTS *BscRetrievePmEarlyInitErrors;  ///< Method: Gathers error information from all Core 0s.
+  OPTION_MULTISOCKET_PM_NB_MIN_COF *GetMinNbCof;                   ///< Method: Get the minimum system and minimum P0 Northbridge frequency.
+  OPTION_MULTISOCKET_GET_PCI_ADDRESS *GetCurrPciAddr;              ///< Method: Get PCI Config Space Address for the current running core.
+  OPTION_MULTISOCKET_MODIFY_CURR_SOCKET_PCI *ModifyCurrSocketPci;  ///< Method: Writes to all nodes on the executing core's socket.
+} OPTION_MULTISOCKET_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif  // _OPTION_MULTISOCKET_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionMultiSocketInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionMultiSocketInstall.h
new file mode 100644
index 0000000000..0f4427836a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionMultiSocketInstall.h
@@ -0,0 +1,105 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Multiple Socket Support
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 51891 $   @e \$Date: 2011-04-28 12:39:55 -0600 (Thu, 28 Apr 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_MULTISOCKET_INSTALL_H_
+#define _OPTION_MULTISOCKET_INSTALL_H_
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#ifndef OPTION_MULTISOCKET
+  #error  BLDOPT: Option not defined: "OPTION_MULTISOCKET"
+#endif
+
+#if OPTION_MULTISOCKET == TRUE
+  OPTION_MULTISOCKET_PM_STEPS GetNumberOfSystemPmStepsPtrMulti;
+  #define GET_NUM_PM_STEPS    GetNumberOfSystemPmStepsPtrMulti
+  OPTION_MULTISOCKET_PM_CORE0_TASK RunCodeOnAllSystemCore0sMulti;
+  #define CORE0_PM_TASK       RunCodeOnAllSystemCore0sMulti
+  OPTION_MULTISOCKET_PM_NB_COF GetSystemNbCofMulti;
+  #define GET_SYS_NB_COF      GetSystemNbCofMulti
+  OPTION_MULTISOCKET_PM_NB_COF_UPDATE GetSystemNbCofVidUpdateMulti;
+  #define GET_SYS_NB_COF_UPDATE GetSystemNbCofVidUpdateMulti
+  OPTION_MULTISOCKET_PM_GET_EVENTS GetEarlyPmErrorsMulti;
+  #define GET_EARLY_PM_ERRORS GetEarlyPmErrorsMulti
+  OPTION_MULTISOCKET_PM_NB_MIN_COF GetMinNbCofMulti;
+  #define GET_MIN_NB_COF GetMinNbCofMulti
+  OPTION_MULTISOCKET_GET_PCI_ADDRESS GetCurrPciAddrMulti;
+  #define GET_PCI_ADDRESS GetCurrPciAddrMulti
+  OPTION_MULTISOCKET_MODIFY_CURR_SOCKET_PCI ModifyCurrSocketPciMulti;
+  #define MODIFY_CURR_SOCKET_PCI ModifyCurrSocketPciMulti
+#else
+  OPTION_MULTISOCKET_PM_STEPS GetNumberOfSystemPmStepsPtrSingle;
+  #define GET_NUM_PM_STEPS    GetNumberOfSystemPmStepsPtrSingle
+  OPTION_MULTISOCKET_PM_CORE0_TASK RunCodeOnAllSystemCore0sSingle;
+  #define CORE0_PM_TASK       RunCodeOnAllSystemCore0sSingle
+  OPTION_MULTISOCKET_PM_NB_COF GetSystemNbCofSingle;
+  #define GET_SYS_NB_COF      GetSystemNbCofSingle
+  OPTION_MULTISOCKET_PM_NB_COF_UPDATE GetSystemNbCofVidUpdateSingle;
+  #define GET_SYS_NB_COF_UPDATE GetSystemNbCofVidUpdateSingle
+  OPTION_MULTISOCKET_PM_GET_EVENTS GetEarlyPmErrorsSingle;
+  #define GET_EARLY_PM_ERRORS GetEarlyPmErrorsSingle
+  OPTION_MULTISOCKET_PM_NB_MIN_COF GetMinNbCofSingle;
+  #define GET_MIN_NB_COF GetMinNbCofSingle
+  OPTION_MULTISOCKET_GET_PCI_ADDRESS GetCurrPciAddrSingle;
+  #define GET_PCI_ADDRESS GetCurrPciAddrSingle
+  OPTION_MULTISOCKET_MODIFY_CURR_SOCKET_PCI ModifyCurrSocketPciSingle;
+  #define MODIFY_CURR_SOCKET_PCI ModifyCurrSocketPciSingle
+#endif
+
+/*  Declare the instance of the multisocket option configuration structure  */
+OPTION_MULTISOCKET_CONFIGURATION  OptionMultiSocketConfiguration = {
+  MULTISOCKET_STRUCT_VERSION,
+  GET_NUM_PM_STEPS,
+  CORE0_PM_TASK,
+  GET_SYS_NB_COF,
+  GET_SYS_NB_COF_UPDATE,
+  GET_EARLY_PM_ERRORS,
+  GET_MIN_NB_COF,
+  GET_PCI_ADDRESS,
+  MODIFY_CURR_SOCKET_PCI
+};
+
+#endif  // _OPTION_MULTISOCKET_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionPreserveMailboxInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionPreserveMailboxInstall.h
new file mode 100644
index 0000000000..2b40f77b17
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionPreserveMailboxInstall.h
@@ -0,0 +1,123 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Preserve Mailbox
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 56186 $   @e \$Date: 2011-07-08 15:35:23 -0600 (Fri, 08 Jul 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_PRESERVE_MAILBOX_INSTALL_H_
+#define _OPTION_PRESERVE_MAILBOX_INSTALL_H_
+
+#include "PreserveMailbox.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_PRESERVE_MAILBOX_FEAT
+#define F10_PRESERVE_MAILBOX_SUPPORT
+#define F15_PRESERVE_MAILBOX_SUPPORT
+
+#if ((AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE))
+  #if ((OPTION_FAMILY10H == TRUE) || (OPTION_FAMILY15H == TRUE))
+    extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeaturePreserveAroundMailbox;
+    #undef OPTION_PRESERVE_MAILBOX_FEAT
+    #define OPTION_PRESERVE_MAILBOX_FEAT &CpuFeaturePreserveAroundMailbox,
+  #endif
+  #if OPTION_FAMILY10H == TRUE
+    CONST PRESERVE_MAILBOX_FAMILY_REGISTER ROMDATA F10PreserveMailboxRegisters [] = {
+      {
+        {MAKE_SBDFO (0, 0, 0, 3, 0x168)},
+        0x00000FFF
+      },
+      {
+        {MAKE_SBDFO (0, 0, 0, 3, 0x170)},
+        0x00000FFF
+      },
+      {
+        {ILLEGAL_SBDFO},
+        0
+      }
+    };
+    CONST PRESERVE_MAILBOX_FAMILY_SERVICES ROMDATA F10PreserveMailboxServices = {
+      0,
+      TRUE,
+      (PRESERVE_MAILBOX_FAMILY_REGISTER *)&F10PreserveMailboxRegisters
+    };
+    #undef F10_PRESERVE_MAILBOX_SUPPORT
+    #define F10_PRESERVE_MAILBOX_SUPPORT {AMD_FAMILY_10, &F10PreserveMailboxServices},
+  #endif
+  #if OPTION_FAMILY15H == TRUE
+    CONST PRESERVE_MAILBOX_FAMILY_REGISTER ROMDATA F15PreserveMailboxRegisters [] = {
+      {
+        {MAKE_SBDFO (0, 0, 0, 3, 0x168)},
+        0x00000FFF
+      },
+      {
+        {MAKE_SBDFO (0, 0, 0, 3, 0x170)},
+        0x00000FFF
+      },
+      {
+        {ILLEGAL_SBDFO},
+        0
+      }
+    };
+    CONST PRESERVE_MAILBOX_FAMILY_SERVICES ROMDATA F15PreserveMailboxServices = {
+      0,
+      TRUE,
+      (PRESERVE_MAILBOX_FAMILY_REGISTER *)&F15PreserveMailboxRegisters
+    };
+    #undef F15_PRESERVE_MAILBOX_SUPPORT
+    #define F15_PRESERVE_MAILBOX_SUPPORT {AMD_FAMILY_15, &F15PreserveMailboxServices},
+  #endif
+  CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA PreserveMailboxFamilyServiceArray[] =
+  {
+    F10_PRESERVE_MAILBOX_SUPPORT
+    F15_PRESERVE_MAILBOX_SUPPORT
+    {0, NULL}
+  };
+  CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA PreserveMailboxFamilyServiceTable =
+  {
+    (sizeof (PreserveMailboxFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+    &PreserveMailboxFamilyServiceArray[0]
+  };
+#endif
+
+#endif  // _OPTION_PRESERVE_MAILBOX_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionPstate.h b/src/vendorcode/amd/agesa/f15/Include/OptionPstate.h
new file mode 100644
index 0000000000..018ddf94bf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionPstate.h
@@ -0,0 +1,116 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD ACPI PState option API.
+ *
+ * Contains structures and values used to control the PStates option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_PSTATE_H_
+#define _OPTION_PSTATE_H_
+
+#include "cpuPstateTables.h"
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef AGESA_STATUS OPTION_SSDT_FEATURE (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **AcpiPstatePtr
+  );
+
+typedef UINT32 OPTION_ACPI_FEATURE (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PSTATE_LEVELING        *PStateLevelingBuffer,
+  IN OUT   VOID                   **AcpiPStatePtr,
+  IN       UINT8                  LocalApicId,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+typedef AGESA_STATUS OPTION_PSTATE_GATHER (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   S_CPU_AMD_PSTATE  *PStateStrucPtr
+  );
+
+typedef AGESA_STATUS OPTION_PSTATE_LEVELING (
+  IN OUT   S_CPU_AMD_PSTATE   *PStateStrucPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+#define PSTATE_STRUCT_VERSION  0x01
+
+/// Indirection vectors for POST/PEI PState code
+typedef struct  {
+  UINT16                  OptPstateVersion;     ///< revision of this structure
+  OPTION_PSTATE_GATHER    *PstateGather;        ///< vector for data gathering routine
+  OPTION_PSTATE_LEVELING  *PstateLeveling;      ///< vector for leveling routine
+} OPTION_PSTATE_POST_CONFIGURATION;
+
+/// Indirection vectors for LATE/DXE PState code
+typedef struct  {
+  UINT16                  OptPstateVersion;     ///< revision of this structure
+  OPTION_SSDT_FEATURE     *SsdtFeature;         ///< vector for routine to generate SSDT
+  OPTION_ACPI_FEATURE     *PstateFeature;       ///< vector for routine to generate ACPI PState Objects
+  OPTION_ACPI_FEATURE     *CstateFeature;       ///< vector for routine to generate ACPI CState Objects
+  BOOLEAN                 CfgPstatePpc;         ///< boolean for creating _PPC method
+  BOOLEAN                 CfgPstatePct;         ///< boolean for creating _PCT method
+  BOOLEAN                 CfgPstatePsd;         ///< boolean for creating _PSD method
+  BOOLEAN                 CfgPstatePss;         ///< boolean for creating _PSS method
+  BOOLEAN                 CfgPstateXpss;        ///< boolean for creating _XPSS method
+} OPTION_PSTATE_LATE_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _OPTION_PSTATE_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionPstateHpcModeInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionPstateHpcModeInstall.h
new file mode 100644
index 0000000000..061b6f598b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionPstateHpcModeInstall.h
@@ -0,0 +1,88 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Pstate HPC mode.
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 52150 $   @e \$Date: 2011-05-03 01:01:08 -0600 (Tue, 03 May 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_PSTATE_HPC_MODE_INSTALL_H_
+#define _OPTION_PSTATE_HPC_MODE_INSTALL_H_
+
+#include "cpuPstateHpcMode.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_CPU_PSTATE_HPC_MODE_FEAT
+#define F15_PSTATE_HPC_MODE_SUPPORT
+
+#if OPTION_CPU_PSTATE_HPC_MODE == TRUE
+  #if (AGESA_ENTRY_INIT_POST == TRUE)
+    // Family 15h
+    #ifdef OPTION_FAMILY15H
+      #if OPTION_FAMILY15H == TRUE
+        // Orochi and Komodo
+        #if (OPTION_FAMILY15H_OR == TRUE) || (OPTION_FAMILY15H_KM == TRUE)
+          extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeaturePstateHpcMode;
+          #undef OPTION_CPU_PSTATE_HPC_MODE_FEAT
+          #define OPTION_CPU_PSTATE_HPC_MODE_FEAT &CpuFeaturePstateHpcMode,
+          extern CONST PSTATE_HPC_MODE_FAMILY_SERVICES ROMDATA F15PstateHpcSupport;
+          #undef F15_PSTATE_HPC_MODE_SUPPORT
+          #define F15_PSTATE_HPC_MODE_SUPPORT {(AMD_FAMILY_15_OR | AMD_FAMILY_15_KM), &F15PstateHpcSupport},
+        #endif
+      #endif
+    #endif
+  #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA PstateHpcModeFamilyServiceArray[] =
+{
+  F15_PSTATE_HPC_MODE_SUPPORT
+  {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA PstateHpcModeFamilyServiceTable =
+{
+  (sizeof (PstateHpcModeFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+  &PstateHpcModeFamilyServiceArray[0]
+};
+
+#endif  // _OPTION_PSTATE_HPC_MODE_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionPstateInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionPstateInstall.h
new file mode 100644
index 0000000000..8ca835c385
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionPstateInstall.h
@@ -0,0 +1,264 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: PState
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 52904 $   @e \$Date: 2011-05-12 16:42:35 -0600 (Thu, 12 May 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_PSTATE_INSTALL_H_
+#define _OPTION_PSTATE_INSTALL_H_
+
+#include "cpuPstateTables.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+
+#define F10_PSTATE_SERVICE_SUPPORT
+#define F12_PSTATE_SERVICE_SUPPORT
+#define F14_PSTATE_SERVICE_SUPPORT
+#define F15_OR_PSTATE_SERVICE_SUPPORT
+#define F15_TN_PSTATE_SERVICE_SUPPORT
+#define F15_KM_PSTATE_SERVICE_SUPPORT
+
+
+#if ((AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE))
+  //
+  //Define Pstate CPU Family service
+  //
+  #ifdef OPTION_FAMILY10H
+    #if OPTION_FAMILY10H == TRUE
+      extern CONST PSTATE_CPU_FAMILY_SERVICES ROMDATA F10PstateServices;
+      #undef F10_PSTATE_SERVICE_SUPPORT
+      #define F10_PSTATE_SERVICE_SUPPORT {AMD_FAMILY_10, &F10PstateServices},
+    #endif
+  #endif
+
+  #ifdef OPTION_FAMILY12H
+    #if OPTION_FAMILY12H == TRUE
+      extern CONST PSTATE_CPU_FAMILY_SERVICES ROMDATA F12PstateServices;
+      #undef F12_PSTATE_SERVICE_SUPPORT
+      #define F12_PSTATE_SERVICE_SUPPORT {AMD_FAMILY_12, &F12PstateServices},
+    #endif
+  #endif
+
+  #ifdef OPTION_FAMILY14H
+    #if OPTION_FAMILY14H == TRUE
+      extern CONST PSTATE_CPU_FAMILY_SERVICES ROMDATA F14PstateServices;
+      #undef F14_PSTATE_SERVICE_SUPPORT
+      #define F14_PSTATE_SERVICE_SUPPORT {AMD_FAMILY_14, &F14PstateServices},
+    #endif
+  #endif
+
+  #ifdef OPTION_FAMILY15H
+    #if OPTION_FAMILY15H == TRUE
+      #ifdef OPTION_FAMILY15H_OR
+        #if OPTION_FAMILY15H_OR == TRUE
+          extern CONST PSTATE_CPU_FAMILY_SERVICES ROMDATA F15OrPstateServices;
+          #undef F15_OR_PSTATE_SERVICE_SUPPORT
+          #define F15_OR_PSTATE_SERVICE_SUPPORT {AMD_FAMILY_15_OR, &F15OrPstateServices},
+        #endif
+      #endif
+      #ifdef OPTION_FAMILY15H_TN
+        #if OPTION_FAMILY15H_TN == TRUE
+          extern CONST PSTATE_CPU_FAMILY_SERVICES ROMDATA F15TnPstateServices;
+          #undef F15_TN_PSTATE_SERVICE_SUPPORT
+          #define F15_TN_PSTATE_SERVICE_SUPPORT {AMD_FAMILY_15_TN, &F15TnPstateServices},
+        #endif
+      #endif
+      #ifdef OPTION_FAMILY15H_KM
+        #if OPTION_FAMILY15H_KM == TRUE
+          extern CONST PSTATE_CPU_FAMILY_SERVICES ROMDATA F15KmPstateServices;
+          #undef F15_KM_PSTATE_SERVICE_SUPPORT
+          #define F15_KM_PSTATE_SERVICE_SUPPORT {AMD_FAMILY_15_KM, &F15KmPstateServices},
+        #endif
+      #endif
+    #endif
+  #endif
+  //
+  //Define ACPI Pstate objects.
+  //
+  #ifndef OPTION_ACPI_PSTATES
+    #error  BLDOPT: Option not defined: "OPTION_ACPI_PSTATES"
+  #endif
+  #if (OPTION_ACPI_PSTATES == TRUE)
+    OPTION_SSDT_FEATURE               GenerateSsdt;
+    #define USER_SSDT_MAIN            GenerateSsdt
+    #ifndef OPTION_MULTISOCKET
+      #error  BLDOPT: Option not defined: "OPTION_MULTISOCKET"
+    #endif
+
+    OPTION_ACPI_FEATURE               CreatePStateAcpiTables;
+    OPTION_PSTATE_GATHER              PStateGatherMain;
+    #if ((OPTION_MULTISOCKET == TRUE) && (AGESA_ENTRY_INIT_POST == TRUE))
+      OPTION_PSTATE_LEVELING          PStateLevelingMain;
+      #define USER_PSTATE_OPTION_LEVEL  PStateLevelingMain
+    #else
+      OPTION_PSTATE_LEVELING            PStateLevelingStub;
+      #define USER_PSTATE_OPTION_LEVEL  PStateLevelingStub
+    #endif
+    #if AGESA_ENTRY_INIT_LATE == TRUE
+      #define USER_PSTATE_OPTION_MAIN   CreatePStateAcpiTables
+    #else
+      OPTION_ACPI_FEATURE               CreateAcpiTablesStub;
+      #define USER_PSTATE_OPTION_MAIN   CreateAcpiTablesStub
+    #endif
+    #if AGESA_ENTRY_INIT_POST == TRUE
+      #define USER_PSTATE_OPTION_GATHER PStateGatherMain
+    #else
+      OPTION_PSTATE_GATHER              PStateGatherStub;
+      #define USER_PSTATE_OPTION_GATHER PStateGatherStub
+    #endif
+    #if CFG_ACPI_PSTATES_PPC == TRUE
+      #define USER_PSTATE_CFG_PPC   TRUE
+    #else
+      #define USER_PSTATE_CFG_PPC   FALSE
+    #endif
+    #if CFG_ACPI_PSTATES_PCT == TRUE
+      #define USER_PSTATE_CFG_PCT   TRUE
+    #else
+      #define USER_PSTATE_CFG_PCT   FALSE
+    #endif
+    #if CFG_ACPI_PSTATES_PSD == TRUE
+      #define USER_PSTATE_CFG_PSD   TRUE
+    #else
+      #define USER_PSTATE_CFG_PSD   FALSE
+    #endif
+    #if CFG_ACPI_PSTATES_PSS == TRUE
+      #define USER_PSTATE_CFG_PSS   TRUE
+    #else
+      #define USER_PSTATE_CFG_PSS   FALSE
+    #endif
+    #if CFG_ACPI_PSTATES_XPSS == TRUE
+      #define USER_PSTATE_CFG_XPSS   TRUE
+    #else
+      #define USER_PSTATE_CFG_XPSS   FALSE
+    #endif
+
+    #if OPTION_IO_CSTATE == TRUE
+      OPTION_ACPI_FEATURE             CreateCStateAcpiTables;
+      #define USER_CSTATE_OPTION_MAIN CreateCStateAcpiTables
+    #else
+      OPTION_ACPI_FEATURE             CreateAcpiTablesStub;
+      #define USER_CSTATE_OPTION_MAIN CreateAcpiTablesStub
+    #endif
+  #else
+    OPTION_SSDT_FEATURE               GenerateSsdtStub;
+    OPTION_ACPI_FEATURE               CreateAcpiTablesStub;
+    OPTION_PSTATE_GATHER              PStateGatherStub;
+    OPTION_PSTATE_LEVELING            PStateLevelingStub;
+    #define USER_SSDT_MAIN            GenerateSsdtStub
+    #define USER_PSTATE_OPTION_MAIN   CreateAcpiTablesStub
+    #define USER_CSTATE_OPTION_MAIN   CreateAcpiTablesStub
+    #define USER_PSTATE_OPTION_GATHER PStateGatherStub
+    #define USER_PSTATE_OPTION_LEVEL  PStateLevelingStub
+    #define USER_PSTATE_CFG_PPC    FALSE
+    #define USER_PSTATE_CFG_PCT    FALSE
+    #define USER_PSTATE_CFG_PSD    FALSE
+    #define USER_PSTATE_CFG_PSS    FALSE
+    #define USER_PSTATE_CFG_XPSS   FALSE
+
+    // If ACPI Objects are disabled for PStates, we still need to check
+    // whether ACPI Objects are enabled for CStates
+    #if OPTION_IO_CSTATE == TRUE
+      OPTION_SSDT_FEATURE               GenerateSsdt;
+      OPTION_PSTATE_GATHER              PStateGatherMain;
+      OPTION_ACPI_FEATURE               CreateCStateAcpiTables;
+      #undef  USER_SSDT_MAIN
+      #define USER_SSDT_MAIN            GenerateSsdt
+      #undef  USER_PSTATE_OPTION_GATHER
+      #define USER_PSTATE_OPTION_GATHER PStateGatherMain
+      #undef  USER_CSTATE_OPTION_MAIN
+      #define USER_CSTATE_OPTION_MAIN   CreateCStateAcpiTables
+    #endif
+  #endif
+#else
+  OPTION_SSDT_FEATURE               GenerateSsdtStub;
+  OPTION_ACPI_FEATURE               CreateAcpiTablesStub;
+  OPTION_PSTATE_GATHER              PStateGatherStub;
+  OPTION_PSTATE_LEVELING            PStateLevelingStub;
+  #define USER_SSDT_MAIN            GenerateSsdtStub
+  #define USER_PSTATE_OPTION_MAIN   CreateAcpiTablesStub
+  #define USER_CSTATE_OPTION_MAIN   CreateAcpiTablesStub
+  #define USER_PSTATE_OPTION_GATHER PStateGatherStub
+  #define USER_PSTATE_OPTION_LEVEL  PStateLevelingStub
+  #define USER_PSTATE_CFG_PPC    FALSE
+  #define USER_PSTATE_CFG_PCT    FALSE
+  #define USER_PSTATE_CFG_PSD    FALSE
+  #define USER_PSTATE_CFG_PSS    FALSE
+  #define USER_PSTATE_CFG_XPSS   FALSE
+#endif
+
+/*  Declare the instance of the PSTATE option configuration structure  */
+OPTION_PSTATE_POST_CONFIGURATION      OptionPstatePostConfiguration = {
+  PSTATE_STRUCT_VERSION,
+  USER_PSTATE_OPTION_GATHER,
+  USER_PSTATE_OPTION_LEVEL
+};
+
+OPTION_PSTATE_LATE_CONFIGURATION      OptionPstateLateConfiguration = {
+  PSTATE_STRUCT_VERSION,
+  USER_SSDT_MAIN,
+  USER_PSTATE_OPTION_MAIN,
+  USER_CSTATE_OPTION_MAIN,
+  USER_PSTATE_CFG_PPC,
+  USER_PSTATE_CFG_PCT,
+  USER_PSTATE_CFG_PSD,
+  USER_PSTATE_CFG_PSS,
+  USER_PSTATE_CFG_XPSS
+};
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA PstateCpuFamilyServiceArray[] =
+{
+  F10_PSTATE_SERVICE_SUPPORT
+  F12_PSTATE_SERVICE_SUPPORT
+  F14_PSTATE_SERVICE_SUPPORT
+  F15_OR_PSTATE_SERVICE_SUPPORT
+  F15_TN_PSTATE_SERVICE_SUPPORT
+  F15_KM_PSTATE_SERVICE_SUPPORT
+  {0, NULL}
+};
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA PstateFamilyServiceTable =
+{
+  (sizeof (PstateCpuFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+  &PstateCpuFamilyServiceArray[0]
+};
+#endif  // _OPTION_PSTATE_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionS3ScriptInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionS3ScriptInstall.h
new file mode 100644
index 0000000000..90362351b5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionS3ScriptInstall.h
@@ -0,0 +1,92 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: S3SCRIPT
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_S3SCRIPT_INSTALL_H_
+#define _OPTION_S3SCRIPT_INSTALL_H_
+
+#include "S3SaveState.h"
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#ifndef OPTION_S3SCRIPT
+  #define OPTION_S3SCRIPT  FALSE    //if not define assume PI not use script
+#endif
+
+#if (AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_ENV == TRUE) || (AGESA_ENTRY_INIT_MID == TRUE)
+  #if OPTION_S3SCRIPT == TRUE
+    #define P_S3_SCRIPT_INIT      S3ScriptInitState
+  #endif
+#endif
+
+#if AGESA_ENTRY_INIT_LATE_RESTORE == TRUE
+  #if OPTION_S3SCRIPT == TRUE
+    #define P_S3_SCRIPT_RESTORE   S3ScriptRestoreState
+  #endif
+#endif
+
+#ifndef P_S3_SCRIPT_INIT
+  #define P_S3_SCRIPT_INIT        S3ScriptInitStateStub
+#endif
+
+#ifndef P_S3_SCRIPT_RESTORE
+  #define P_S3_SCRIPT_RESTORE     S3ScriptInitStateStub
+  #undef  GNB_S3_DISPATCH_FUNCTION_TABLE
+#endif
+
+#ifndef GNB_S3_DISPATCH_FUNCTION_TABLE
+  #define GNB_S3_DISPATCH_FUNCTION_TABLE
+#endif
+
+/*  Declare the instance of the S3SCRIPT option configuration structure  */
+S3_SCRIPT_CONFIGURATION OptionS3ScriptConfiguration = {
+  P_S3_SCRIPT_INIT,
+  P_S3_SCRIPT_RESTORE
+};
+
+S3_DISPATCH_FUNCTION_ENTRY S3DispatchFunctionTable [] = {
+  GNB_S3_DISPATCH_FUNCTION_TABLE
+  {0, NULL}
+};
+#endif  // _OPTION_S3SCRIPT_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionSlit.h b/src/vendorcode/amd/agesa/f15/Include/OptionSlit.h
new file mode 100644
index 0000000000..6e77ac4052
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionSlit.h
@@ -0,0 +1,97 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD SLIT option API.
+ *
+ * Contains structures and values used to control the SLIT option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_SLIT_H_
+#define _OPTION_SLIT_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Create the ACPI System Locality Distance Information Table.
+ *
+ */
+typedef AGESA_STATUS OPTION_SLIT_FEATURE (
+  IN OUT   AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **SlitPtr
+  );
+
+/**
+ * Clean up DRAM used during SLIT creation.
+ *
+ */
+typedef AGESA_STATUS OPTION_SLIT_RELEASE_BUFFER (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+#define SLIT_STRUCT_VERSION  0x01
+
+/// The Option Configuration of SLIT
+typedef struct  {
+  UINT16              OptSlitVersion;       ///< The version number of SLIT
+  OPTION_SLIT_FEATURE  *SlitFeature;        ///< The Option Feature of SLIT
+  OPTION_SLIT_RELEASE_BUFFER *SlitReleaseBuffer; ///< Release buffer
+} OPTION_SLIT_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif  // _OPTION_SLIT_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionSlitInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionSlitInstall.h
new file mode 100644
index 0000000000..b98d181af2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionSlitInstall.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: SLIT
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_SLIT_INSTALL_H_
+#define _OPTION_SLIT_INSTALL_H_
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#if AGESA_ENTRY_INIT_LATE == TRUE
+  #ifndef OPTION_SLIT
+    #error  BLDOPT: Option not defined: "OPTION_SLIT"
+  #endif
+  #if OPTION_SLIT == TRUE
+    OPTION_SLIT_FEATURE               GetAcpiSlitMain;
+    OPTION_SLIT_RELEASE_BUFFER   ReleaseSlitBuffer;
+    #define USER_SLIT_OPTION     GetAcpiSlitMain
+    #define USER_SLIT_RELEASE_BUFFER ReleaseSlitBuffer
+  #else
+    OPTION_SLIT_FEATURE               GetAcpiSlitStub;
+    OPTION_SLIT_RELEASE_BUFFER   ReleaseSlitBufferStub;
+    #define USER_SLIT_OPTION     GetAcpiSlitStub
+    #define USER_SLIT_RELEASE_BUFFER ReleaseSlitBufferStub
+  #endif
+#else
+  OPTION_SLIT_FEATURE               GetAcpiSlitStub;
+  OPTION_SLIT_RELEASE_BUFFER   ReleaseSlitBufferStub;
+  #define USER_SLIT_OPTION     GetAcpiSlitStub
+  #define USER_SLIT_RELEASE_BUFFER ReleaseSlitBufferStub
+#endif
+/*  Declare the instance of the SLIT option configuration structure  */
+OPTION_SLIT_CONFIGURATION OptionSlitConfiguration = {
+  SLIT_STRUCT_VERSION,
+  USER_SLIT_OPTION,
+  USER_SLIT_RELEASE_BUFFER
+};
+
+#endif  // _OPTION_SLIT_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionSrat.h b/src/vendorcode/amd/agesa/f15/Include/OptionSrat.h
new file mode 100644
index 0000000000..987d051119
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionSrat.h
@@ -0,0 +1,83 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD SRAT option API.
+ *
+ * Contains structures and values used to control the SRAT option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_SRAT_H_
+#define _OPTION_SRAT_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef AGESA_STATUS OPTION_SRAT_FEATURE (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   VOID                  **SratPtr
+  );
+
+#define SRAT_STRUCT_VERSION  0x01
+
+/// The Option Configuration of SRAT
+typedef struct  {
+  UINT16              OptSratVersion;       ///< The version number of SRAT
+  OPTION_SRAT_FEATURE  *SratFeature;        ///< The Option Feature of SRAT
+} OPTION_SRAT_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif  // _OPTION_SRAT_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionSratInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionSratInstall.h
new file mode 100644
index 0000000000..aa3323f389
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionSratInstall.h
@@ -0,0 +1,74 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: SRAT
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_SRAT_INSTALL_H_
+#define _OPTION_SRAT_INSTALL_H_
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#if AGESA_ENTRY_INIT_LATE == TRUE
+  #ifndef OPTION_SRAT
+    #error  BLDOPT: Option not defined: "OPTION_SRAT"
+  #endif
+  #if OPTION_SRAT == TRUE
+    OPTION_SRAT_FEATURE          GetAcpiSratMain;
+    #define USER_SRAT_OPTION     GetAcpiSratMain
+  #else
+    OPTION_SRAT_FEATURE          GetAcpiSratStub;
+    #define USER_SRAT_OPTION     GetAcpiSratStub
+  #endif
+#else
+  OPTION_SRAT_FEATURE            GetAcpiSratStub;
+  #define USER_SRAT_OPTION       GetAcpiSratStub
+#endif
+
+/*  Declare the instance of the WHEA option configuration structure  */
+OPTION_SRAT_CONFIGURATION OptionSratConfiguration = {
+  SRAT_STRUCT_VERSION,
+  USER_SRAT_OPTION
+};
+
+#endif  // _OPTION_WHEA_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionSwC1eInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionSwC1eInstall.h
new file mode 100644
index 0000000000..74967e8001
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionSwC1eInstall.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: SW C1e
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_SW_C1E_INSTALL_H_
+#define _OPTION_SW_C1E_INSTALL_H_
+
+#include "cpuSwC1e.h"
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#define OPTION_SW_C1E_FEAT
+#define F10_SW_C1E_SUPPORT
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+  #ifdef OPTION_FAMILY10H
+    #if OPTION_FAMILY10H == TRUE
+      #if (OPTION_FAMILY10H_BL == TRUE) || (OPTION_FAMILY10H_DA == TRUE) || (OPTION_FAMILY10H_RB == TRUE) || (OPTION_FAMILY10H_PH == TRUE)
+        extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureSwC1e;
+        #undef OPTION_SW_C1E_FEAT
+        #define OPTION_SW_C1E_FEAT &CpuFeatureSwC1e,
+        extern CONST SW_C1E_FAMILY_SERVICES ROMDATA F10SwC1e;
+        #undef F10_SW_C1E_SUPPORT
+        #define F10_SW_C1E_SUPPORT {(AMD_FAMILY_10_BL | AMD_FAMILY_10_DA | AMD_FAMILY_10_RB | AMD_FAMILY_10_PH), &F10SwC1e},
+      #endif
+    #endif
+  #endif
+  CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA SwC1eFamilyServiceArray[] =
+  {
+    F10_SW_C1E_SUPPORT
+    {0, NULL}
+  };
+  CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA SwC1eFamilyServiceTable =
+  {
+    (sizeof (SwC1eFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+    &SwC1eFamilyServiceArray[0]
+  };
+#endif
+
+#endif  // _OPTION_SW_C1E_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionWhea.h b/src/vendorcode/amd/agesa/f15/Include/OptionWhea.h
new file mode 100644
index 0000000000..0ae3447816
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionWhea.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD WHEA option API.
+ *
+ * Contains structures and values used to control the WHEA option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_WHEA_H_
+#define _OPTION_WHEA_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef AGESA_STATUS OPTION_WHEA_FEATURE (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader,
+  IN OUT   VOID                 **WheaMcePtr,
+  IN OUT   VOID                 **WheaCmcPtr
+  );
+
+#define WHEA_STRUCT_VERSION  0x01
+
+/// The Option Configuration of WHEA
+typedef struct  {
+  UINT16              OptWheaVersion;       ///< The version number of WHEA
+  OPTION_WHEA_FEATURE  *WheaFeature;        ///< The Option Feature of WHEA
+} OPTION_WHEA_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif  // _OPTION_WHEA_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionWheaInstall.h b/src/vendorcode/amd/agesa/f15/Include/OptionWheaInstall.h
new file mode 100644
index 0000000000..a7f388cbf1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionWheaInstall.h
@@ -0,0 +1,75 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: WHEA
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Options
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_WHEA_INSTALL_H_
+#define _OPTION_WHEA_INSTALL_H_
+
+/*  This option is designed to be included into the platform solution install
+ *  file. The platform solution install file will define the options status.
+ *  Check to validate the definition
+ */
+#if AGESA_ENTRY_INIT_LATE == TRUE
+  #ifndef OPTION_WHEA
+    #error  BLDOPT: Option not defined: "OPTION_WHEA"
+  #endif
+  #if OPTION_WHEA == TRUE
+    OPTION_WHEA_FEATURE          GetAcpiWheaMain;
+    #define USER_WHEA_OPTION     GetAcpiWheaMain
+  #else
+    OPTION_WHEA_FEATURE          GetAcpiWheaStub;
+    #define USER_WHEA_OPTION     GetAcpiWheaStub
+  #endif
+
+#else
+  OPTION_WHEA_FEATURE            GetAcpiWheaStub;
+  #define USER_WHEA_OPTION       GetAcpiWheaStub
+#endif
+
+/*  Declare the instance of the WHEA option configuration structure  */
+OPTION_WHEA_CONFIGURATION OptionWheaConfiguration = {
+  WHEA_STRUCT_VERSION,
+  USER_WHEA_OPTION
+};
+
+#endif  // _OPTION_WHEA_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/Options.h b/src/vendorcode/amd/agesa/f15/Include/Options.h
new file mode 100644
index 0000000000..abb4a7681f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/Options.h
@@ -0,0 +1,98 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AGESA options structures
+ *
+ * Contains options control structures for the AGESA build options
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 53142 $   @e \$Date: 2011-05-16 12:01:19 -0600 (Mon, 16 May 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+
+#ifndef _OPTIONS_H_
+#define _OPTIONS_H_
+
+/**
+ * Provide topology limits for loops and runtime, based on supported families.
+ */
+typedef struct {
+  UINT32              PlatformNumberOfSockets;                  ///< The limit to the number of processors based on
+                                                                ///< supported families and other build options.
+  UINT32              PlatformNumberOfModules;                  ///< The limit to the number of modules in a processor, based
+                                                                ///< on supported families.
+} OPTIONS_CONFIG_TOPOLOGY;
+
+/**
+ * Dispatch Table.
+ *
+ * The push high dispatcher uses this table to find what entries are currently in the build image.
+ */
+typedef struct {
+  UINT32              FunctionId;                   ///< The function id specified.
+  IMAGE_ENTRY         EntryPoint;                   ///< The corresponding entry point to call.
+} DISPATCH_TABLE;
+
+#ifdef BLDCFG_PLATFORM_POWER_POLICY_MODE
+  #define CFG_PLATFORM_POWER_POLICY_MODE  (BLDCFG_PLATFORM_POWER_POLICY_MODE)
+#else
+  #define CFG_PLATFORM_POWER_POLICY_MODE  (Performance)
+#endif
+
+#ifdef BLDCFG_PCI_MMIO_BASE
+  #define CFG_PCI_MMIO_BASE               (BLDCFG_PCI_MMIO_BASE)
+#else
+  #define CFG_PCI_MMIO_BASE               (0)
+#endif
+
+#ifdef BLDCFG_PCI_MMIO_SIZE
+  #define CFG_PCI_MMIO_SIZE               (BLDCFG_PCI_MMIO_SIZE)
+#else
+  #define CFG_PCI_MMIO_SIZE               (0)
+#endif
+
+#ifdef BLDCFG_AP_MTRR_SETTINGS_LIST
+  #define CFG_AP_MTRR_SETTINGS_LIST           (BLDCFG_AP_MTRR_SETTINGS_LIST)
+#else
+  #define CFG_AP_MTRR_SETTINGS_LIST           (NULL)
+#endif
+
+#ifdef BLDCFG_IOMMU_EXCLUSION_RANGE_LIST
+  #define CFG_IOMMU_EXCLUSION_RANGE_LIST      (BLDCFG_IOMMU_EXCLUSION_RANGE_LIST)
+#else
+  #define CFG_IOMMU_EXCLUSION_RANGE_LIST      (NULL)
+#endif
+
+#endif // _OPTIONS_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionsHt.h b/src/vendorcode/amd/agesa/f15/Include/OptionsHt.h
new file mode 100644
index 0000000000..ddcc024281
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionsHt.h
@@ -0,0 +1,110 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD HyperTransport option API.
+ *
+ * Contains option pre-compile logic.  This file is used by the options
+ * installer and internally by the HT code initializers.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_HT_H_
+#define _OPTION_HT_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Provide HT build option results
+ */
+typedef struct {
+  CONST BOOLEAN IsUsingRecoveryHt;                   ///< Manual BUID Swap List processing should assume that HT Recovery was used.
+  CONST BOOLEAN IsSetHtCrcFlood;                     ///< Enable setting of HT CRC Flood.
+                                                     ///< Build-time only customizable - @BldCfgItem{BLDCFG_SET_HTCRC_SYNC_FLOOD}
+  CONST BOOLEAN IsUsingUnitIdClumping;               ///< Enable automatically HT Spec compliant Unit Id Clumping.
+                                                     ///< Build-time only customizable - @BldCfgItem{BLDCFG_USE_UNIT_ID_CLUMPING}
+  CONST AMD_HT_INTERFACE *HtOptionPlatformDefaults;  ///< A set of build time options for HT constructor.
+  CONST VOID *HtOptionInternalInterface;             ///< Use this internal interface initializer.
+  CONST VOID *HtOptionInternalFeatures;              ///< Use this internal feature set initializer.
+  CONST VOID *HtOptionFamilyNorthbridgeList;         ///< Use this list of northbridge initializers.
+  CONST UINT8 *CONST *HtOptionBuiltinTopologies;     ///< Use this list of built-in topologies.
+} OPTION_HT_CONFIGURATION;
+
+typedef AGESA_STATUS
+F_OPTION_HT_INIT_RESET (
+  IN       AMD_CONFIG_PARAMS        *StdHeader,
+  IN       AMD_HT_RESET_INTERFACE   *AmdHtResetInterface
+  );
+
+typedef F_OPTION_HT_INIT_RESET *PF_OPTION_HT_INIT_RESET;
+
+typedef AGESA_STATUS
+F_OPTION_HT_RESET_CONSTRUCTOR (
+  IN       AMD_CONFIG_PARAMS         *StdHeader,
+  IN       AMD_HT_RESET_INTERFACE    *AmdHtResetInterface
+  );
+
+typedef F_OPTION_HT_RESET_CONSTRUCTOR *PF_OPTION_HT_RESET_CONSTRUCTOR;
+
+/**
+ * Provide HT reset initialization build option results
+ */
+typedef struct {
+  PF_OPTION_HT_INIT_RESET HtInitReset;               ///< Method: HT reset initialization.
+  PF_OPTION_HT_RESET_CONSTRUCTOR HtResetConstructor; ///< Method: HT reset initialization.
+} OPTION_HT_INIT_RESET;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _OPTION_HT_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/OptionsPage.h b/src/vendorcode/amd/agesa/f15/Include/OptionsPage.h
new file mode 100644
index 0000000000..0cb1567148
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/OptionsPage.h
@@ -0,0 +1,378 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Create outline and references for Build Configuration and Options Component mainpage documentation.
+ *
+ * Design guides, maintenance guides, and general documentation, are
+ * collected using this file onto the documentation mainpage.
+ * This file contains doxygen comment blocks, only.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Documentation
+ * @e \$Revision: 52274 $   @e \$Date: 2011-05-04 01:00:15 -0600 (Wed, 04 May 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/**
+ * @page optionmain Build Configuration and Options Documentation
+ *
+ * Additional documentation for the Build Configuration and Options component consists of
+ *
+ * - Introduction and Overview to Build Options
+ *   - @subpage platforminstall "Platform Build Options"
+ *   - @subpage bldcfg "Build Configuration Item Cross Reference"
+ *   - @subpage examplecustomizations "Customization Examples"
+ * - Maintenance Guides:
+ *   -  For debug of the Options system, use compiler options
+ *      @n <tt>      /P /EP /C /FAs      </tt> @n
+ *      PreProcessor output is produced in an .i file in the directory where the project
+ *      file is located.
+ * - Design Guides:
+ *   - add here >>>
+ *
+ */
+
+/**
+ * @page platforminstall Platform Build Options.
+ *
+ * Build options are boolean constants. The purpose of build options is to remove code
+ * from the build to reduce the overall code size present in the ROM image. Unless
+ * otherwise specified, the default action is to include all options. If a build option is
+ * not specifically listed as disabled, then it is included into the build.
+ *
+ * The documented build options are imported from a user controlled file for
+ * processing. The build options for all platform solutions are listed below:
+ *
+ * @anchor BLDOPT_REMOVE_UDIMMS_SUPPORT
+ * @li @e BLDOPT_REMOVE_UDIMMS_SUPPORT @n
+ *        If unbuffered DIMMs are NOT expected to be required in the system, the code that
+ *        handles unbuffered DIMMs can be removed from the build.
+ *
+ * @anchor BLDOPT_REMOVE_RDIMMS_SUPPORT
+ * @li @e  BLDOPT_REMOVE_RDIMMS_SUPPORT @n
+ *         If registered DIMMs are NOT expected to be required in the system, the code
+ *         that handles registered DIMMs can be removed from the build.
+ *
+  * @anchor BLDOPT_REMOVE_LRDIMMS_SUPPORT
+ * @li @e  BLDOPT_REMOVE_LRDIMMS_SUPPORT @n
+ *         If Load Reduced DIMMs are NOT expected to be required in the system, the code
+ *         that handles Load Reduced DIMMs can be removed from the build.
+ *
+ *     @note The above three options operate independently from each other; however, at
+ *     least one of the unbuffered , registered or load reduced DIMM options must be present in the build.
+ *
+ * @anchor BLDOPT_REMOVE_ECC_SUPPORT
+ * @li @e  BLDOPT_REMOVE_ECC_SUPPORT @n
+ *         Use this option to remove the code for Error Checking & Correction.
+ *
+ * @anchor BLDOPT_REMOVE_BANK_INTERLEAVE
+ * @li @e  BLDOPT_REMOVE_BANK_INTERLEAVE @n
+ *         Interleaving is a mechanism to do performance fine tuning. This option
+ *         interleaves memory between banks on a DIMM.
+ *
+ * @anchor BLDOPT_REMOVE_DCT_INTERLEAVE
+ * @li @e  BLDOPT_REMOVE_DCT_INTERLEAVE @n
+ *         Interleaving is a mechanism to do performance fine tuning. This option
+ *         interleaves memory from two DRAM controllers.
+ *
+ * @anchor BLDOPT_REMOVE_NODE_INTERLEAVE
+ * @li @e  BLDOPT_REMOVE_NODE_INTERLEAVE @n
+ *         Interleaving is a mechanism to do performance fine tuning. This option
+ *         interleaves memory from two HyperTransport nodes.
+ *
+ * @anchor BLDOPT_REMOVE_PARALLEL_TRAINING
+ * @li @e  BLDOPT_REMOVE_PARALLEL_TRAINING @n
+ *         For multi-socket systems, training memory in parallel can reduce the time
+ *         needed to boot.
+ *
+ * @anchor BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT
+ * @li @e  BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT @n
+ *         Online Spare support is removed by this option.
+ *
+ * @anchor BLDOPT_REMOVE_MULTISOCKET_SUPPORT
+ * @li @e BLDOPT_REMOVE_MULTISOCKET_SUPPORT @n
+ *        Many systems use only a single socket and may benefit in code space to remove
+ *        this code. However, certain processors have multiple HyperTransport nodes
+ *        within a single socket. For these processors, the multi-node support is
+ *        required and this option has no effect.
+ *
+ * @anchor BLDOPT_REMOVE_ACPI_PSTATES
+ * @li @e  BLDOPT_REMOVE_ACPI_PSTATES @n
+ *         This option removes the code that generates the ACPI tables used in power
+ *         management.
+ *
+ * @anchor BLDCFG_PSTATE_HPC_MODE
+ * @li @e  BLDCFG_PSTATE_HPC_MODE @n
+ *         This option enables PStates high performance computing mode (HPC mode)
+ *
+ * @anchor BLDOPT_REMOVE_SRAT
+ * @li @e  BLDOPT_REMOVE_SRAT @n
+ *         This option removes the code that generates the SRAT tables used in performance
+ *         tuning.
+ *
+ * @anchor BLDOPT_REMOVE_SLIT
+ * @li @e  BLDOPT_REMOVE_SLIT @n
+ *         This option removes the code that generates the SLIT tables used in performance
+ *         tuning.
+ *
+ * @anchor BLDOPT_REMOVE_WHEA
+ * @li @e  BLDOPT_REMOVE_WHEA @n
+ *         This option removes the code that generates the WHEA tables used in error
+ *         handling and reporting.
+ *
+ * @anchor BLDOPT_REMOVE_DMI
+ * @li @e  BLDOPT_REMOVE_DMI @n
+ *         This option removes the code that generates the DMI tables used in system
+ *         management.
+ *
+ * @anchor BLDOPT_REMOVE_DQS_TRAINING
+ * @li @e  BLDOPT_REMOVE_DQS_TRAINING @n
+ *         This option removes the code used in memory performance tuning.
+ *
+ * @anchor BLDOPT_REMOVE_EARLY_SAMPLES
+ * @li @e  BLDOPT_REMOVE_EARLY_SAMPLES @n
+ *         Special support for Early Samples is included. Default setting is FALSE.
+ *
+ * @anchor BLDOPT_REMOVE_HT_ASSIST
+ * @li @e  BLDOPT_REMOVE_HT_ASSIST @n
+ *         This option removes the code which implements the HT Assist feature.
+ *
+ * @anchor BLDOPT_REMOVE_ATM_MODE
+ * @li @e  BLDOPT_REMOVE_ATM_MODE @n
+ *         This option removes the code which implements the ATM feature.
+ *
+ * @anchor BLDOPT_REMOVE_MSG_BASED_C1E
+ * @li @e  BLDOPT_REMOVE_MSG_BASED_C1E @n
+ *         This option removes the code which implements the Message Based C1e feature.
+ *
+ * @anchor BLDOPT_REMOVE_C6_STATE
+ * @li @e  BLDOPT_REMOVE_C6_STATE @n
+ *         This option removes the code which implements the C6 C-state feature.
+ *
+ * @anchor BLDOPT_REMOVE_MEM_RESTORE_SUPPORT
+ * @li @e  BLDOPT_REMOVE_MEM_RESTORE_SUPPORT @n
+ *         This option removes the memory context restore feature.
+ *
+ * @anchor BLDOPT_REMOVE_FAMILY_10_SUPPORT
+ * @li @e  BLDOPT_REMOVE_FAMILY_10_SUPPORT @n
+ *         If the package contains support for family 10h processors, remove that support.
+ *
+ * @anchor BLDOPT_REMOVE_FAMILY_12_SUPPORT
+ * @li @e  BLDOPT_REMOVE_FAMILY_12_SUPPORT @n
+ *         If the package contains support for family 10h processors, remove that support.
+ *
+ * @anchor BLDOPT_REMOVE_FAMILY_14_SUPPORT
+ * @li @e  BLDOPT_REMOVE_FAMILY_14_SUPPORT @n
+ *         If the package contains support for family 14h processors, remove that support.
+ *
+ * @anchor BLDOPT_REMOVE_FAMILY_15_SUPPORT
+ * @li @e  BLDOPT_REMOVE_FAMILY_15_SUPPORT @n
+ *         If the package contains support for family 15h processors, remove that support.
+ *
+ * @anchor BLDOPT_REMOVE_AM3_SOCKET_SUPPORT
+ * @li @e  BLDOPT_REMOVE_AM3_SOCKET_SUPPORT @n
+ *         This option removes the code which implements support for processors packaged for AM3 sockets.
+ *
+ * @anchor BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT
+ * @li @e  BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT @n
+ *         This option removes the code which implements support for processors packaged for ASB2 sockets.
+ *
+ * @anchor BLDOPT_REMOVE_C32_SOCKET_SUPPORT
+ * @li @e  BLDOPT_REMOVE_C32_SOCKET_SUPPORT @n
+ *         This option removes the code which implements support for processors packaged for C32 sockets.
+ *
+ * @anchor BLDOPT_REMOVE_FM1_SOCKET_SUPPORT
+ * @li @e  BLDOPT_REMOVE_FM1_SOCKET_SUPPORT @n
+ *         This option removes the code which implements support for processors packaged for FM1 sockets.
+ *
+ * @anchor BLDOPT_REMOVE_FP1_SOCKET_SUPPORT
+ * @li @e  BLDOPT_REMOVE_FP1_SOCKET_SUPPORT @n
+ *         This option removes the code which implements support for processors packaged for FP1 sockets.
+ *
+ * @anchor BLDOPT_REMOVE_FS1_SOCKET_SUPPORT
+ * @li @e  BLDOPT_REMOVE_FS1_SOCKET_SUPPORT @n
+ *         This option removes the code which implements support for processors packaged for FS1 sockets.
+ *
+ * @anchor BLDOPT_REMOVE_FT1_SOCKET_SUPPORT
+ * @li @e  BLDOPT_REMOVE_FT1_SOCKET_SUPPORT @n
+ *         This option removes the code which implements support for processors packaged for FT1 sockets.
+ *
+ * @anchor BLDOPT_REMOVE_G34_SOCKET_SUPPORT
+ * @li @e  BLDOPT_REMOVE_G34_SOCKET_SUPPORT @n
+ *         This option removes the code which implements support for processors packaged for G34 sockets.
+ *
+ * @anchor BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT
+ * @li @e  BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT @n
+ *         This option removes the code which implements support for processors packaged for S1G3 sockets.
+ *
+ * @anchor BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT
+ * @li @e  BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT @n
+ *         This option removes the code which implements support for processors packaged for S1G4 sockets.
+ */
+
+/**
+ * @page examplecustomizations Customization Examples
+ *
+ * The Addendum \<plat\>Options.c file for each platform contains the minimum required
+ * customizations for that platform.  That is, it contains settings which would be needed
+ * to boot a SimNow! bsd for that platform.
+ * However, each individual product based on that platform will have customizations necessary for
+ * that hardware.  Since the actual customizations needed vary so much, they are not included in
+ * the \<plat\>Options.c.  This section provides examples of useful customizations that you can use or
+ * modify to suit your needs.
+ *
+ * @par
+ *
+ * Source for the examples shown can be found at Addendum\\Examples. @n
+ *
+ * - @ref DeemphasisExamples "Deemphasis List Examples"
+ * - @ref FrequencyLimitExamples "Frequency Limit Examples"
+ * - @ref PerfPerWattHt "A performance-per-watt optimization Example"
+ *
+ * @anchor DeemphasisExamples
+ * @par Deemphasis List Examples
+ *
+ * These examples customize PLATFORM_CONFIGURATION.PlatformDeemphasisList.
+ * Source for the deemphasis list examples can be found in DeemphasisExamples.c. @n
+ * @dontinclude DeemphasisExamples.c
+ * <ul>
+ * <li>
+ *  The following deemphasis list provides an example for a 2P MCM Max Performance configuration.
+ *  High Speed HT frequencies are supported.  There is only one non-coherent chain.  Note the technique of
+ *  putting specified link matches before all uses of match any.  It often works well to specify the non-coherent links
+ *  and use match any for the coherent links.
+ *  @skip DinarDeemphasisList
+ *  @until {
+ *  The non-coherent chain can run up to 2600 MHz.  The chain is located on Socket 0, package Link 2.
+ *  @until {
+ *  @line }
+ *  @line {
+ *  @line }
+ *  The coherent links can run up to 3200 MHz.
+ *  @until HT_FREQUENCY_MAX
+ *  @line }
+ *  end of list:
+ *  @until }
+ *  Make this list the build time customized deemphasis list.
+ *  @line define
+ *
+ * </li><li>
+ *
+ * The following deemphasis list provides an example for a 4P MCM Max Performance configuration.
+ * This system has a backplane with connectors for CPU cards and an IO board. So trace lengths are long.
+ * There can be one to four IO Chains, depending on the IO board.
+ * @skipline DoubloonDeemphasisList
+ * @until DoubloonDeemphasisList
+ *
+ * </li><li>
+ *
+ * The following deemphasis list further illustrates complex coherent system deemphasis.  This is the same
+ * Dinar system as in an earlier example, but this time all the coherent links are explicitly customized (as
+ * might be needed if each link has unique characterization).  For this example, we skip the non-coherent chains.
+ * (A real system would have to include them, see example above.)
+ *  @skip DinarPerLinkDeemphasisList
+ *  @until {
+ *  Provide deemphasis settings for the 16 bit, ganged, links, Socket 0 links 0, 1 and Socket 1 links 1 and 2.
+ *  Provide entries to customize all HT3 frequencies at which the links may run.  This example covers all HT3 speeds.
+ *  @until {
+ *  @until DcvLevelMinus6
+ *  @until DcvLevelMinus6
+ *  @until DcvLevelMinus6
+ *  @until DcvLevelMinus6
+ *  Link 3 on both sockets connects different internal die:  sublink 0 connects the internal node zeroes, and
+ *  sublink 1 connects the internal node ones.  So the link is unganged and both sublinks must be specifically
+ *  customized.
+ *  @until {
+ *  @until DcvLevelMinus6
+ *  @until DcvLevelMinus6
+ *  @until DcvLevelMinus6
+ *  @until DcvLevelMinus6
+ *  end of list:
+ *  @until define
+ *
+ * </ul>
+ *
+ * @anchor FrequencyLimitExamples
+ * @par Frequency Limit Examples
+ *
+ * These examples customize AMD_HT_INTERFACE.CpuToCpuPcbLimitsList and AMD_HT_INTERFACE.IoPcbLimitsList.
+ * Source for the frequency limit examples can be found in FrequencyLimitExamples.c. @n
+ * @dontinclude FrequencyLimitExamples.c
+ * <ul>
+ * <li>
+ *    The following list provides an example for limiting all coherent links to non-extended frequencies,
+ * that is, to 2600 MHz or less.
+ * @skipline NonExtendedCpuToCpuLimitList
+ * @until {
+ *   Provide the limit customization.  Match links from any socket, any package link, to any socket, any package link. Width is not limited.
+ * @until HT_FREQUENCY_LIMIT_2600M
+ * End of list:
+ * @until ;
+ * Customize the build to use this cpu to cpu frequency limit.
+ * @until NonExtendedCpuToCpuLimitList
+ * @n </li>
+ * <li>
+ *    The following list provides an example for limiting all coherent links to HT 1 frequencies,
+ * that is, to 1000 MHz or less.  This is sometimes useful for test and debug.
+ * @skipline Ht1CpuToCpuLimitList
+ * @until Ht1CpuToCpuLimitList
+ * @n </li>
+ * <li>
+ *    The following list provides an example for limiting all non-coherent links to 2400 MHz or less.
+ *    The chain is matched by host processor Socket and package Link.  The depth can be used to select a particular device
+ *    to device link on the chain. In this example, the chain consists of a single cave device and depth can be set to match any.
+ * @skipline No2600MhzIoLimitList
+ * @until No2600MhzIoLimitList
+ * @n </li>
+ * <li>
+ *    The following list provides an example for limiting all non-coherent links to the minimum HT 3 frequency,
+ * that is, to 1200 MHz or less.  This can be useful for test and debug.
+ * @skipline MinHt3IoLimitList
+ * @until MinHt3IoLimitList
+ * @n </li>
+ *
+ * </ul>
+ *
+ * @anchor PerfPerWattHt
+ * @par Performance-per-Watt Optimization Example
+ *
+ * This example customizes AMD_HT_INTERFACE.SkipRegangList.
+ * Source for the Performance-per-watt Optimization example can be found in PerfPerWatt.c. @n
+ * @dontinclude PerfPerWatt.c
+ * To implement a performance-per-watt optimization for MCM processors, use the skip regang structure shown. @n
+ * @skipline PerfPerWatt
+ * @until PerfPerWatt
+ *
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Include/PlatformInstall.h b/src/vendorcode/amd/agesa/f15/Include/PlatformInstall.h
new file mode 100644
index 0000000000..38ec4ad421
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/PlatformInstall.h
@@ -0,0 +1,2837 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build options for a combination of package type, processor, and features.
+ *
+ * This file generates the defaults tables for the all platform solution
+ * combinations.  The documented build options are imported from a user
+ * controlled file for processing.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 60740 $   @e \$Date: 2011-10-20 19:47:10 -0600 (Thu, 20 Oct 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+/*****************************************************************************
+ *
+ * Start processing the user options:  First, set default settings
+ *
+ ****************************************************************************/
+
+/* Available options for image builds.
+ *
+ * As part of the image build for each image, define the options below to select the
+ * AGESA entry points included in that image.  Turn these on in your option c file, not
+ * here.
+ */
+// #define AGESA_ENTRY_INIT_RESET                    TRUE
+// #define AGESA_ENTRY_INIT_RECOVERY                 TRUE
+// #define AGESA_ENTRY_INIT_EARLY                    TRUE
+// #define AGESA_ENTRY_INIT_POST                     TRUE
+// #define AGESA_ENTRY_INIT_ENV                      TRUE
+// #define AGESA_ENTRY_INIT_MID                      TRUE
+// #define AGESA_ENTRY_INIT_LATE                     TRUE
+// #define AGESA_ENTRY_INIT_S3SAVE                   TRUE
+// #define AGESA_ENTRY_INIT_RESUME                   TRUE
+// #define AGESA_ENTRY_INIT_LATE_RESTORE             TRUE
+// #define AGESA_ENTRY_INIT_GENERAL_SERVICES         TRUE
+
+/*  Defaults for private/internal build control settings  */
+/* Available options for image builds.
+ *
+ * As part of the image build for each image, define the options below to select the
+ * AGESA entry points included in that image.
+ */
+
+VOLATILE  AMD_MODULE_HEADER mCpuModuleID = {
+  //ModuleHeaderSignature
+  // Remove 'DOM$' as temp solution before update BinUtil.exe ,
+  Int32FromChar ('0', '0', '0', '0'),
+  //ModuleIdentifier[8]
+  AGESA_ID,
+  //ModuleVersion[12]
+  AGESA_VERSION_STRING,
+  //ModuleDispatcher
+  NULL,//(VOID *)(UINT64)((MODULE_ENTRY)AmdAgesaDispatcher),
+  //NextBlock
+  NULL
+};
+
+/*  Process user desired AGESA entry points  */
+#ifndef AGESA_ENTRY_INIT_RESET
+  #define AGESA_ENTRY_INIT_RESET                     FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_RECOVERY
+  #define AGESA_ENTRY_INIT_RECOVERY                  FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_EARLY
+  #define AGESA_ENTRY_INIT_EARLY                     FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_POST
+  #define AGESA_ENTRY_INIT_POST                      FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_ENV
+  #define AGESA_ENTRY_INIT_ENV                       FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_MID
+  #define AGESA_ENTRY_INIT_MID                       FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_LATE
+  #define AGESA_ENTRY_INIT_LATE                      FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_S3SAVE
+  #define AGESA_ENTRY_INIT_S3SAVE                    FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_RESUME
+  #define AGESA_ENTRY_INIT_RESUME                    FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_LATE_RESTORE
+  #define AGESA_ENTRY_INIT_LATE_RESTORE              FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_GENERAL_SERVICES
+  #define AGESA_ENTRY_INIT_GENERAL_SERVICES          FALSE
+#endif
+
+/*  Default the late AP entry point to off.  It can be enabled
+    by any family that may need the late AP functionality, or
+    by any feature code that may need it.  The IBVs no longer
+    have control over this entry point.  */
+#ifdef AGESA_ENTRY_LATE_RUN_AP_TASK
+  #undef AGESA_ENTRY_LATE_RUN_AP_TASK
+#endif
+#define AGESA_ENTRY_LATE_RUN_AP_TASK    FALSE
+
+
+
+/* Process solution defined socket / family installations
+ *
+ * As part of the release package for each image, define the options below to select the
+ * AGESA processor support included in that image.
+ */
+
+/*  Default sockets to off  */
+#define OPTION_G34_SOCKET_SUPPORT    FALSE
+#define OPTION_C32_SOCKET_SUPPORT    FALSE
+#define OPTION_G2012_SOCKET_SUPPORT  FALSE
+#define OPTION_C2012_SOCKET_SUPPORT  FALSE
+#define OPTION_S1G3_SOCKET_SUPPORT   FALSE
+#define OPTION_S1G4_SOCKET_SUPPORT   FALSE
+#define OPTION_ASB2_SOCKET_SUPPORT   FALSE
+#define OPTION_FS1_SOCKET_SUPPORT    FALSE
+#define OPTION_FM1_SOCKET_SUPPORT    FALSE
+#define OPTION_FM2_SOCKET_SUPPORT    FALSE
+#define OPTION_FP1_SOCKET_SUPPORT    FALSE
+#define OPTION_FP2_SOCKET_SUPPORT    FALSE
+#define OPTION_FT1_SOCKET_SUPPORT    FALSE
+#define OPTION_FT2_SOCKET_SUPPORT    FALSE
+#define OPTION_AM3_SOCKET_SUPPORT    FALSE
+
+/*  Default families to off  */
+#define OPTION_FAMILY10H             FALSE
+#define OPTION_FAMILY12H             FALSE
+#define OPTION_FAMILY14H             FALSE
+#define OPTION_FAMILY15H             FALSE
+#define OPTION_FAMILY15H_MODEL_0x    FALSE
+#define OPTION_FAMILY15H_MODEL_1x    FALSE
+#define OPTION_FAMILY15H_MODEL_2x    FALSE
+
+
+/*  Enable the appropriate socket support  */
+#ifdef INSTALL_G34_SOCKET_SUPPORT
+  #if  INSTALL_G34_SOCKET_SUPPORT == TRUE
+    #undef OPTION_G34_SOCKET_SUPPORT
+    #define OPTION_G34_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_C32_SOCKET_SUPPORT
+  #if  INSTALL_C32_SOCKET_SUPPORT == TRUE
+    #undef OPTION_C32_SOCKET_SUPPORT
+    #define OPTION_C32_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_G2012_SOCKET_SUPPORT
+  #if  INSTALL_G2012_SOCKET_SUPPORT == TRUE
+    #undef OPTION_G2012_SOCKET_SUPPORT
+    #define OPTION_G2012_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_C2012_SOCKET_SUPPORT
+  #if  INSTALL_C2012_SOCKET_SUPPORT == TRUE
+    #undef OPTION_C2012_SOCKET_SUPPORT
+    #define OPTION_C2012_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_S1G3_SOCKET_SUPPORT
+  #if  INSTALL_S1G3_SOCKET_SUPPORT == TRUE
+    #undef OPTION_S1G3_SOCKET_SUPPORT
+    #define OPTION_S1G3_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_S1G4_SOCKET_SUPPORT
+  #if  INSTALL_S1G4_SOCKET_SUPPORT == TRUE
+    #undef OPTION_S1G4_SOCKET_SUPPORT
+    #define OPTION_S1G4_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_ASB2_SOCKET_SUPPORT
+  #if  INSTALL_ASB2_SOCKET_SUPPORT == TRUE
+    #undef OPTION_ASB2_SOCKET_SUPPORT
+    #define OPTION_ASB2_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_FS1_SOCKET_SUPPORT
+  #if  INSTALL_FS1_SOCKET_SUPPORT == TRUE
+    #undef OPTION_FS1_SOCKET_SUPPORT
+    #define OPTION_FS1_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_FM1_SOCKET_SUPPORT
+  #if  INSTALL_FM1_SOCKET_SUPPORT == TRUE
+    #undef OPTION_FM1_SOCKET_SUPPORT
+    #define OPTION_FM1_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_FM2_SOCKET_SUPPORT
+  #if  INSTALL_FM2_SOCKET_SUPPORT == TRUE
+    #undef OPTION_FM2_SOCKET_SUPPORT
+    #define OPTION_FM2_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_FP1_SOCKET_SUPPORT
+  #if  INSTALL_FP1_SOCKET_SUPPORT == TRUE
+    #undef OPTION_FP1_SOCKET_SUPPORT
+    #define OPTION_FP1_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_FP2_SOCKET_SUPPORT
+  #if  INSTALL_FP2_SOCKET_SUPPORT == TRUE
+    #undef OPTION_FP2_SOCKET_SUPPORT
+    #define OPTION_FP2_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_FT1_SOCKET_SUPPORT
+  #if  INSTALL_FT1_SOCKET_SUPPORT == TRUE
+    #undef OPTION_FT1_SOCKET_SUPPORT
+    #define OPTION_FT1_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_FT2_SOCKET_SUPPORT
+  #if  INSTALL_FT2_SOCKET_SUPPORT == TRUE
+    #undef OPTION_FT2_SOCKET_SUPPORT
+    #define OPTION_FT2_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+#ifdef INSTALL_AM3_SOCKET_SUPPORT
+  #if  INSTALL_AM3_SOCKET_SUPPORT == TRUE
+    #undef OPTION_AM3_SOCKET_SUPPORT
+    #define OPTION_AM3_SOCKET_SUPPORT  TRUE
+  #endif
+#endif
+
+
+/*  Enable the appropriate family support  */
+// F10 is supported in G34, C32, S1g4, ASB2, S1g3, & AM3
+#ifdef INSTALL_FAMILY_10_SUPPORT
+  #if  INSTALL_FAMILY_10_SUPPORT == TRUE
+    #undef OPTION_FAMILY10H
+    #define OPTION_FAMILY10H     TRUE
+  #endif
+#endif
+
+// F12 is supported in FP1, FS1, & FM1
+#ifdef INSTALL_FAMILY_12_SUPPORT
+  #if  INSTALL_FAMILY_12_SUPPORT == TRUE
+    #undef OPTION_FAMILY12H
+    #define OPTION_FAMILY12H     TRUE
+  #endif
+#endif
+
+// F14 is supported in FT1 and FT2
+#ifdef INSTALL_FAMILY_14_SUPPORT
+  #if  INSTALL_FAMILY_14_SUPPORT == TRUE
+    #undef OPTION_FAMILY14H
+    #define OPTION_FAMILY14H     TRUE
+  #endif
+#endif
+
+// F15_0x is supported in G34, C32, & AM3
+#ifdef INSTALL_FAMILY_15_MODEL_0x_SUPPORT
+  #if  INSTALL_FAMILY_15_MODEL_0x_SUPPORT == TRUE
+    #undef OPTION_FAMILY15H
+    #define OPTION_FAMILY15H     TRUE
+    #undef OPTION_FAMILY15H_MODEL_0x
+    #define OPTION_FAMILY15H_MODEL_0x     TRUE
+  #endif
+#endif
+
+// F15_1x is supported in FS1r2, FM2, & FP2
+#ifdef INSTALL_FAMILY_15_MODEL_1x_SUPPORT
+  #if  INSTALL_FAMILY_15_MODEL_1x_SUPPORT == TRUE
+    #undef OPTION_FAMILY15H
+    #define OPTION_FAMILY15H     TRUE
+    #undef OPTION_FAMILY15H_MODEL_1x
+    #define OPTION_FAMILY15H_MODEL_1x     TRUE
+  #endif
+#endif
+
+// F15_2x is supported in G2012, C2012, & FM2
+#ifdef INSTALL_FAMILY_15_MODEL_2x_SUPPORT
+  #if  INSTALL_FAMILY_15_MODEL_2x_SUPPORT == TRUE
+    #undef OPTION_FAMILY15H
+    #define OPTION_FAMILY15H     TRUE
+    #undef OPTION_FAMILY15H_MODEL_2x
+    #define OPTION_FAMILY15H_MODEL_2x     TRUE
+  #endif
+#endif
+
+
+/*  Turn off families not required by socket designations */
+#if (OPTION_FAMILY10H == TRUE)
+  #if (OPTION_G34_SOCKET_SUPPORT == FALSE) && (OPTION_C32_SOCKET_SUPPORT == FALSE) && (OPTION_S1G3_SOCKET_SUPPORT == FALSE) && (OPTION_S1G4_SOCKET_SUPPORT == FALSE) && (OPTION_ASB2_SOCKET_SUPPORT == FALSE) && (OPTION_AM3_SOCKET_SUPPORT == FALSE)
+    #undef OPTION_FAMILY10H
+    #define OPTION_FAMILY10H  FALSE
+  #endif
+#endif
+
+#if (OPTION_FAMILY12H == TRUE)
+  #if (OPTION_FS1_SOCKET_SUPPORT == FALSE) && (OPTION_FM1_SOCKET_SUPPORT == FALSE) && (OPTION_FP1_SOCKET_SUPPORT == FALSE)
+    #undef OPTION_FAMILY12H
+    #define OPTION_FAMILY12H  FALSE
+  #endif
+#endif
+
+#if (OPTION_FAMILY14H == TRUE)
+  #if (OPTION_FT1_SOCKET_SUPPORT == FALSE) && (OPTION_FT2_SOCKET_SUPPORT == FALSE)
+    #undef OPTION_FAMILY14H
+    #define OPTION_FAMILY14H  FALSE
+  #endif
+#endif
+
+#if (OPTION_FAMILY15H_MODEL_0x == TRUE)
+  #if (OPTION_G34_SOCKET_SUPPORT == FALSE) && (OPTION_C32_SOCKET_SUPPORT == FALSE) && (OPTION_AM3_SOCKET_SUPPORT == FALSE)
+    #undef OPTION_FAMILY15H_MODEL_0x
+    #define OPTION_FAMILY15H_MODEL_0x  FALSE
+  #endif
+#endif
+
+#if (OPTION_FAMILY15H_MODEL_1x == TRUE)
+  #if (OPTION_FS1_SOCKET_SUPPORT == FALSE) && (OPTION_FM2_SOCKET_SUPPORT == FALSE) && (OPTION_FP2_SOCKET_SUPPORT == FALSE)
+    #undef OPTION_FAMILY15H_MODEL_1x
+    #define OPTION_FAMILY15H_MODEL_1x  FALSE
+  #endif
+#endif
+
+#if (OPTION_FAMILY15H_MODEL_2x == TRUE)
+  #if (OPTION_G2012_SOCKET_SUPPORT == FALSE) && (OPTION_C2012_SOCKET_SUPPORT == FALSE) && (OPTION_FM2_SOCKET_SUPPORT == FALSE)
+    #undef OPTION_FAMILY15H_MODEL_2x
+    #define OPTION_FAMILY15H_MODEL_2x  FALSE
+  #endif
+#endif
+
+#if (OPTION_FAMILY15H_MODEL_0x == FALSE) && (OPTION_FAMILY15H_MODEL_1x == FALSE) && (OPTION_FAMILY15H_MODEL_2x == FALSE)
+  #undef OPTION_FAMILY15H
+  #define OPTION_FAMILY15H     FALSE
+#endif
+
+/*  Check for invalid combinations of socket/family */
+#if (OPTION_G34_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == FALSE) && (OPTION_FAMILY15H_MODEL_0x == FALSE)
+    #error No G34 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_C32_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == FALSE) && (OPTION_FAMILY15H_MODEL_0x == FALSE)
+    #error No C32 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_G2012_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY15H_MODEL_2x == FALSE)
+    #error No G2012 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_C2012_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY15H_MODEL_2x == FALSE)
+    #error No C2012 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_S1G3_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == FALSE)
+    #error No S1G3 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_S1G4_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == FALSE)
+    #error No S1G4 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_ASB2_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == FALSE)
+    #error No ASB2 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_FS1_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY12H == FALSE) && (OPTION_FAMILY15H_MODEL_1x == FALSE)
+    #error No FS1 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_FM1_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY12H == FALSE)
+    #error No FM1 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_FM2_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY15H_MODEL_1x == FALSE) && (OPTION_FAMILY15H_MODEL_2x == FALSE)
+    #error No FM2 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_FP1_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY12H == FALSE)
+    #error No FP1 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_FP2_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY15H_MODEL_1x == FALSE)
+    #error No FP2 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_FT1_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY14H == FALSE)
+    #error No FT1 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_FT2_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY14H == FALSE)
+    #error No FT2 supported families included in the build
+  #endif
+#endif
+
+#if (OPTION_AM3_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == FALSE) && (OPTION_FAMILY15H_MODEL_0x == FALSE)
+    #error No AM3 supported families included in the build
+  #endif
+#endif
+
+
+/* Process AGESA private data
+ *
+ * Turn on appropriate CPU models and memory controllers,
+ * as well as some other memory controls.
+ */
+
+/*  Default all models to off  */
+#define OPTION_FAMILY10H_BL          FALSE
+#define OPTION_FAMILY10H_DA          FALSE
+#define OPTION_FAMILY10H_HY          FALSE
+#define OPTION_FAMILY10H_PH          FALSE
+#define OPTION_FAMILY10H_RB          FALSE
+#define OPTION_FAMILY12H_LN          FALSE
+#define OPTION_FAMILY14H_ON          FALSE
+#define OPTION_FAMILY14H_KR          FALSE
+#define OPTION_FAMILY15H_OR          FALSE
+#define OPTION_FAMILY15H_TN          FALSE
+#define OPTION_FAMILY15H_KM          FALSE
+
+/*  Default all memory controllers to off  */
+#define OPTION_MEMCTLR_DR            FALSE
+#define OPTION_MEMCTLR_HY            FALSE
+#define OPTION_MEMCTLR_OR            FALSE
+#define OPTION_MEMCTLR_C32           FALSE
+#define OPTION_MEMCTLR_DA            FALSE
+#define OPTION_MEMCTLR_LN            FALSE
+#define OPTION_MEMCTLR_ON            FALSE
+#define OPTION_MEMCTLR_KR            FALSE
+#define OPTION_MEMCTLR_Ni            FALSE
+#define OPTION_MEMCTLR_PH            FALSE
+#define OPTION_MEMCTLR_RB            FALSE
+#define OPTION_MEMCTLR_TN            FALSE
+#define OPTION_MEMCTLR_KM            FALSE
+
+/*  Default all memory controls to off  */
+#define OPTION_HW_WRITE_LEV_TRAINING            FALSE
+#define OPTION_SW_WRITE_LEV_TRAINING            FALSE
+#define OPTION_CONTINOUS_PATTERN_GENERATION     FALSE
+#define OPTION_HW_DQS_REC_EN_TRAINING           FALSE
+#define OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING   FALSE
+#define OPTION_OPT_SW_DQS_REC_EN_TRAINING       FALSE
+#define OPTION_NON_OPT_SW_RD_WR_POS_TRAINING    FALSE
+#define OPTION_OPT_SW_RD_WR_POS_TRAINING        FALSE
+#define OPTION_MAX_RD_LAT_TRAINING              FALSE
+#define OPTION_HW_DRAM_INIT                     FALSE
+#define OPTION_SW_DRAM_INIT                     FALSE
+#define OPTION_S3_MEM_SUPPORT                   FALSE
+#define OPTION_ADDR_TO_CS_TRANSLATOR            FALSE
+#define OPTION_HW_DQS_REC_EN_SEED_TRAINING      FALSE
+#define OPTION_RDDQS____TRAINING                FALSE
+
+/*  Defaults for public user options  */
+#define OPTION_UDIMMS                           FALSE
+#define OPTION_RDIMMS                           FALSE
+#define OPTION_SODIMMS                          FALSE
+#define OPTION_LRDIMMS                          FALSE
+#define OPTION_DDR2                             FALSE
+#define OPTION_DDR3                             FALSE
+#define OPTION_ECC                              FALSE
+#define OPTION_BANK_INTERLEAVE                  FALSE
+#define OPTION_DCT_INTERLEAVE                   FALSE
+#define OPTION_NODE_INTERLEAVE                  FALSE
+#define OPTION_PARALLEL_TRAINING                FALSE
+#define OPTION_ONLINE_SPARE                     FALSE
+#define OPTION_MEM_RESTORE                      FALSE
+#define OPTION_DIMM_EXCLUDE                     FALSE
+
+/*  Default all CPU controls to off  */
+#define OPTION_MULTISOCKET                      FALSE
+#define OPTION_SRAT                             FALSE
+#define OPTION_SLIT                             FALSE
+#define OPTION_HT_ASSIST                        FALSE
+#define OPTION_ATM_MODE                         FALSE
+#define OPTION_CPU_CORELEVLING                  FALSE
+#define OPTION_MSG_BASED_C1E                    FALSE
+#define OPTION_CPU_CFOH                         FALSE
+#define OPTION_C6_STATE                         FALSE
+#define OPTION_IO_CSTATE                        FALSE
+#define OPTION_CPB                              FALSE
+#define OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT   FALSE
+#define OPTION_CPU_PSTATE_HPC_MODE              FALSE
+#define OPTION_CPU_APM                          FALSE
+#define OPTION_S3SCRIPT                         FALSE
+#define OPTION_GFX_RECOVERY                     FALSE
+
+/*  Default FCH controls to off  */
+#define FCH_SUPPORT                             FALSE
+
+/*  Enable all private controls based on socket/family enables  */
+#if (OPTION_G34_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == TRUE)
+    #undef OPTION_FAMILY10H_HY
+    #define OPTION_FAMILY10H_HY  TRUE
+    #undef OPTION_MEMCTLR_HY
+    #define OPTION_MEMCTLR_HY    TRUE
+    #undef OPTION_HW_WRITE_LEV_TRAINING
+    #define OPTION_HW_WRITE_LEV_TRAINING  TRUE
+    #undef OPTION_OPT_SW_DQS_REC_EN_TRAINING
+    #define OPTION_OPT_SW_DQS_REC_EN_TRAINING  TRUE
+    #undef OPTION_OPT_SW_RD_WR_POS_TRAINING
+    #define OPTION_OPT_SW_RD_WR_POS_TRAINING  TRUE
+    #undef OPTION_MAX_RD_LAT_TRAINING
+    #define OPTION_MAX_RD_LAT_TRAINING  TRUE
+    #undef OPTION_SW_DRAM_INIT
+    #define OPTION_SW_DRAM_INIT  TRUE
+    #undef OPTION_S3_MEM_SUPPORT
+    #define OPTION_S3_MEM_SUPPORT  TRUE
+    #undef OPTION_MULTISOCKET
+    #define OPTION_MULTISOCKET  TRUE
+    #undef OPTION_SRAT
+    #define OPTION_SRAT  TRUE
+    #undef OPTION_SLIT
+    #define OPTION_SLIT  TRUE
+    #undef OPTION_HT_ASSIST
+    #define OPTION_HT_ASSIST  TRUE
+    #undef OPTION_CPU_CORELEVLING
+    #define OPTION_CPU_CORELEVLING  TRUE
+    #undef OPTION_MSG_BASED_C1E
+    #define OPTION_MSG_BASED_C1E  TRUE
+    #undef OPTION_CPU_CFOH
+    #define OPTION_CPU_CFOH  TRUE
+    #undef OPTION_UDIMMS
+    #define OPTION_UDIMMS  TRUE
+    #undef OPTION_RDIMMS
+    #define OPTION_RDIMMS  TRUE
+    #undef OPTION_SODIMMS
+    #define OPTION_SODIMMS  TRUE
+    #undef OPTION_DDR3
+    #define OPTION_DDR3  TRUE
+    #undef OPTION_ECC
+    #define OPTION_ECC  TRUE
+    #undef OPTION_BANK_INTERLEAVE
+    #define OPTION_BANK_INTERLEAVE  TRUE
+    #undef OPTION_DCT_INTERLEAVE
+    #define OPTION_DCT_INTERLEAVE  TRUE
+    #undef OPTION_NODE_INTERLEAVE
+    #define OPTION_NODE_INTERLEAVE  TRUE
+    #undef OPTION_PARALLEL_TRAINING
+    #define OPTION_PARALLEL_TRAINING  TRUE
+    #undef OPTION_MEM_RESTORE
+    #define OPTION_MEM_RESTORE  TRUE
+    #undef OPTION_ONLINE_SPARE
+    #define OPTION_ONLINE_SPARE TRUE
+    #undef OPTION_DIMM_EXCLUDE
+    #define OPTION_DIMM_EXCLUDE  TRUE
+  #endif
+  #if (OPTION_FAMILY15H_MODEL_0x == TRUE)
+    #undef OPTION_FAMILY15H_OR
+    #define OPTION_FAMILY15H_OR  TRUE
+    #undef OPTION_MEMCTLR_OR
+    #define OPTION_MEMCTLR_OR    TRUE
+    #undef OPTION_HW_WRITE_LEV_TRAINING
+    #define OPTION_HW_WRITE_LEV_TRAINING  TRUE
+    #undef OPTION_CONTINOUS_PATTERN_GENERATION
+    #define OPTION_CONTINOUS_PATTERN_GENERATION  TRUE
+    #undef OPTION_HW_DQS_REC_EN_TRAINING
+    #define OPTION_HW_DQS_REC_EN_TRAINING  TRUE
+    #undef OPTION_HW_DQS_REC_EN_SEED_TRAINING
+    #define OPTION_HW_DQS_REC_EN_SEED_TRAINING      TRUE
+    #undef OPTION_OPT_SW_DQS_REC_EN_TRAINING
+    #define OPTION_OPT_SW_DQS_REC_EN_TRAINING  TRUE
+    #undef OPTION_OPT_SW_RD_WR_POS_TRAINING
+    #define OPTION_OPT_SW_RD_WR_POS_TRAINING  TRUE
+    #undef OPTION_MAX_RD_LAT_TRAINING
+    #define OPTION_MAX_RD_LAT_TRAINING  TRUE
+    #undef OPTION_SW_DRAM_INIT
+    #define OPTION_SW_DRAM_INIT  TRUE
+    #undef OPTION_S3_MEM_SUPPORT
+    #define OPTION_S3_MEM_SUPPORT  TRUE
+    #undef OPTION_MULTISOCKET
+    #define OPTION_MULTISOCKET  TRUE
+    #undef OPTION_C6_STATE
+    #define OPTION_C6_STATE  TRUE
+    #undef OPTION_IO_CSTATE
+    #define OPTION_IO_CSTATE TRUE
+    #undef OPTION_CPB
+    #define OPTION_CPB  TRUE
+    #undef OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT
+    #define OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT TRUE
+    #undef OPTION_CPU_APM
+    #define OPTION_CPU_APM TRUE
+    #undef OPTION_SRAT
+    #define OPTION_SRAT  TRUE
+    #undef OPTION_SLIT
+    #define OPTION_SLIT  TRUE
+    #undef OPTION_HT_ASSIST
+    #define OPTION_HT_ASSIST  TRUE
+    #undef OPTION_ATM_MODE
+    #define OPTION_ATM_MODE  TRUE
+    #undef OPTION_CPU_CORELEVLING
+    #define OPTION_CPU_CORELEVLING  TRUE
+    #undef OPTION_MSG_BASED_C1E
+    #define OPTION_MSG_BASED_C1E  TRUE
+    #undef OPTION_CPU_CFOH
+    #define OPTION_CPU_CFOH  TRUE
+    #undef OPTION_UDIMMS
+    #define OPTION_UDIMMS  TRUE
+    #undef OPTION_RDIMMS
+    #define OPTION_RDIMMS  TRUE
+    #undef OPTION_SODIMMS
+    #define OPTION_SODIMMS  TRUE
+    #undef OPTION_LRDIMMS
+    #define OPTION_LRDIMMS  TRUE
+    #undef OPTION_DDR3
+    #define OPTION_DDR3  TRUE
+    #undef OPTION_ECC
+    #define OPTION_ECC  TRUE
+    #undef OPTION_BANK_INTERLEAVE
+    #define OPTION_BANK_INTERLEAVE  TRUE
+    #undef OPTION_DCT_INTERLEAVE
+    #define OPTION_DCT_INTERLEAVE  TRUE
+    #undef OPTION_NODE_INTERLEAVE
+    #define OPTION_NODE_INTERLEAVE  TRUE
+    #undef OPTION_MEM_RESTORE
+    #define OPTION_MEM_RESTORE  TRUE
+    #undef OPTION_ONLINE_SPARE
+    #define OPTION_ONLINE_SPARE TRUE
+    #undef OPTION_DIMM_EXCLUDE
+    #define OPTION_DIMM_EXCLUDE  TRUE
+  #endif
+#endif
+
+#if (OPTION_C32_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == TRUE)
+    #undef OPTION_FAMILY10H_HY
+    #define OPTION_FAMILY10H_HY  TRUE
+    #undef OPTION_MEMCTLR_C32
+    #define OPTION_MEMCTLR_C32   TRUE
+    #undef OPTION_HW_WRITE_LEV_TRAINING
+    #define OPTION_HW_WRITE_LEV_TRAINING  TRUE
+    #undef OPTION_OPT_SW_DQS_REC_EN_TRAINING
+    #define OPTION_OPT_SW_DQS_REC_EN_TRAINING  TRUE
+    #undef OPTION_OPT_SW_RD_WR_POS_TRAINING
+    #define OPTION_OPT_SW_RD_WR_POS_TRAINING  TRUE
+    #undef OPTION_MAX_RD_LAT_TRAINING
+    #define OPTION_MAX_RD_LAT_TRAINING  TRUE
+    #undef OPTION_SW_DRAM_INIT
+    #define OPTION_SW_DRAM_INIT  TRUE
+    #undef OPTION_S3_MEM_SUPPORT
+    #define OPTION_S3_MEM_SUPPORT  TRUE
+    #undef OPTION_ADDR_TO_CS_TRANSLATOR
+    #define OPTION_ADDR_TO_CS_TRANSLATOR  FALSE
+    #undef OPTION_MULTISOCKET
+    #define OPTION_MULTISOCKET  TRUE
+    #undef OPTION_SRAT
+    #define OPTION_SRAT  TRUE
+    #undef OPTION_SLIT
+    #define OPTION_SLIT  TRUE
+    #undef OPTION_HT_ASSIST
+    #define OPTION_HT_ASSIST  TRUE
+    #undef OPTION_CPU_CORELEVLING
+    #define OPTION_CPU_CORELEVLING  TRUE
+    #undef OPTION_MSG_BASED_C1E
+    #define OPTION_MSG_BASED_C1E  TRUE
+    #undef OPTION_CPU_CFOH
+    #define OPTION_CPU_CFOH  TRUE
+    #undef OPTION_UDIMMS
+    #define OPTION_UDIMMS  TRUE
+    #undef OPTION_RDIMMS
+    #define OPTION_RDIMMS  TRUE
+    #undef OPTION_SODIMMS
+    #define OPTION_SODIMMS  TRUE
+    #undef OPTION_DDR3
+    #define OPTION_DDR3  TRUE
+    #undef OPTION_ECC
+    #define OPTION_ECC  TRUE
+    #undef OPTION_BANK_INTERLEAVE
+    #define OPTION_BANK_INTERLEAVE  TRUE
+    #undef OPTION_DCT_INTERLEAVE
+    #define OPTION_DCT_INTERLEAVE  TRUE
+    #undef OPTION_NODE_INTERLEAVE
+    #define OPTION_NODE_INTERLEAVE  TRUE
+    #undef OPTION_PARALLEL_TRAINING
+    #define OPTION_PARALLEL_TRAINING  TRUE
+    #undef OPTION_MEM_RESTORE
+    #define OPTION_MEM_RESTORE  TRUE
+    #undef OPTION_ONLINE_SPARE
+    #define OPTION_ONLINE_SPARE TRUE
+    #undef OPTION_DIMM_EXCLUDE
+    #define OPTION_DIMM_EXCLUDE  TRUE
+  #endif
+  #if (OPTION_FAMILY15H_MODEL_0x == TRUE)
+    #undef OPTION_FAMILY15H_OR
+    #define OPTION_FAMILY15H_OR  TRUE
+    #undef OPTION_MEMCTLR_OR
+    #define OPTION_MEMCTLR_OR    TRUE
+    #undef OPTION_HW_WRITE_LEV_TRAINING
+    #define OPTION_HW_WRITE_LEV_TRAINING  TRUE
+    #undef OPTION_CONTINOUS_PATTERN_GENERATION
+    #define OPTION_CONTINOUS_PATTERN_GENERATION  TRUE
+    #undef OPTION_HW_DQS_REC_EN_TRAINING
+    #define OPTION_HW_DQS_REC_EN_TRAINING  TRUE
+    #undef OPTION_HW_DQS_REC_EN_SEED_TRAINING
+    #define OPTION_HW_DQS_REC_EN_SEED_TRAINING      TRUE
+    #undef OPTION_OPT_SW_DQS_REC_EN_TRAINING
+    #define OPTION_OPT_SW_DQS_REC_EN_TRAINING  TRUE
+    #undef OPTION_OPT_SW_RD_WR_POS_TRAINING
+    #define OPTION_OPT_SW_RD_WR_POS_TRAINING  TRUE
+    #undef OPTION_MAX_RD_LAT_TRAINING
+    #define OPTION_MAX_RD_LAT_TRAINING  TRUE
+    #undef OPTION_SW_DRAM_INIT
+    #define OPTION_SW_DRAM_INIT  TRUE
+    #undef OPTION_S3_MEM_SUPPORT
+    #define OPTION_S3_MEM_SUPPORT  TRUE
+    #undef OPTION_ADDR_TO_CS_TRANSLATOR
+    #define OPTION_ADDR_TO_CS_TRANSLATOR  TRUE
+    #undef OPTION_MULTISOCKET
+    #define OPTION_MULTISOCKET  TRUE
+    #undef OPTION_C6_STATE
+    #define OPTION_C6_STATE  TRUE
+    #undef OPTION_IO_CSTATE
+    #define OPTION_IO_CSTATE TRUE
+    #undef OPTION_CPB
+    #define OPTION_CPB  TRUE
+    #undef OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT
+    #define OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT TRUE
+    #undef OPTION_CPU_APM
+    #define OPTION_CPU_APM TRUE
+    #undef OPTION_SRAT
+    #define OPTION_SRAT  TRUE
+    #undef OPTION_SLIT
+    #define OPTION_SLIT  TRUE
+    #undef OPTION_HT_ASSIST
+    #define OPTION_HT_ASSIST  TRUE
+    #undef OPTION_ATM_MODE
+    #define OPTION_ATM_MODE  TRUE
+    #undef OPTION_CPU_CORELEVLING
+    #define OPTION_CPU_CORELEVLING  TRUE
+    #undef OPTION_MSG_BASED_C1E
+    #define OPTION_MSG_BASED_C1E  TRUE
+    #undef OPTION_CPU_CFOH
+    #define OPTION_CPU_CFOH  TRUE
+    #undef OPTION_UDIMMS
+    #define OPTION_UDIMMS  TRUE
+    #undef OPTION_RDIMMS
+    #define OPTION_RDIMMS  TRUE
+    #undef OPTION_SODIMMS
+    #define OPTION_SODIMMS  TRUE
+    #undef OPTION_LRDIMMS
+    #define OPTION_LRDIMMS  TRUE
+    #undef OPTION_DDR3
+    #define OPTION_DDR3  TRUE
+    #undef OPTION_ECC
+    #define OPTION_ECC  TRUE
+    #undef OPTION_BANK_INTERLEAVE
+    #define OPTION_BANK_INTERLEAVE  TRUE
+    #undef OPTION_DCT_INTERLEAVE
+    #define OPTION_DCT_INTERLEAVE  TRUE
+    #undef OPTION_NODE_INTERLEAVE
+    #define OPTION_NODE_INTERLEAVE  TRUE
+    #undef OPTION_MEM_RESTORE
+    #define OPTION_MEM_RESTORE  TRUE
+    #undef OPTION_ONLINE_SPARE
+    #define OPTION_ONLINE_SPARE TRUE
+    #undef OPTION_DIMM_EXCLUDE
+    #define OPTION_DIMM_EXCLUDE  TRUE
+  #endif
+#endif
+
+#if (OPTION_S1G3_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == TRUE)
+    #undef OPTION_FAMILY10H_BL
+    #define OPTION_FAMILY10H_BL  TRUE
+    #undef OPTION_FAMILY10H_DA
+    #define OPTION_FAMILY10H_DA  TRUE
+    #undef OPTION_MEMCTLR_DA
+    #define OPTION_MEMCTLR_DA    TRUE
+    #undef OPTION_HW_WRITE_LEV_TRAINING
+    #define OPTION_HW_WRITE_LEV_TRAINING  TRUE
+    #undef OPTION_OPT_SW_DQS_REC_EN_TRAINING
+    #define OPTION_OPT_SW_DQS_REC_EN_TRAINING  TRUE
+    #undef OPTION_OPT_SW_RD_WR_POS_TRAINING
+    #define OPTION_OPT_SW_RD_WR_POS_TRAINING  TRUE
+    #undef OPTION_MAX_RD_LAT_TRAINING
+    #define OPTION_MAX_RD_LAT_TRAINING  TRUE
+    #undef OPTION_SW_DRAM_INIT
+    #define OPTION_SW_DRAM_INIT  TRUE
+    #undef OPTION_S3_MEM_SUPPORT
+    #define OPTION_S3_MEM_SUPPORT  TRUE
+    #undef OPTION_CPU_CORELEVLING
+    #define OPTION_CPU_CORELEVLING  TRUE
+    #undef OPTION_CPU_CFOH
+    #define OPTION_CPU_CFOH  TRUE
+    #undef OPTION_UDIMMS
+    #define OPTION_UDIMMS  TRUE
+    #undef OPTION_SODIMMS
+    #define OPTION_SODIMMS  TRUE
+    #undef OPTION_DDR3
+    #define OPTION_DDR3  TRUE
+    #undef OPTION_ECC
+    #define OPTION_ECC  TRUE
+    #undef OPTION_BANK_INTERLEAVE
+    #define OPTION_BANK_INTERLEAVE  TRUE
+    #undef OPTION_DCT_INTERLEAVE
+    #define OPTION_DCT_INTERLEAVE  TRUE
+    #undef OPTION_NODE_INTERLEAVE
+    #define OPTION_NODE_INTERLEAVE  TRUE
+    #undef OPTION_PARALLEL_TRAINING
+    #define OPTION_PARALLEL_TRAINING  TRUE
+    #undef OPTION_MEM_RESTORE
+    #define OPTION_MEM_RESTORE  TRUE
+    #undef OPTION_ONLINE_SPARE
+    #define OPTION_ONLINE_SPARE TRUE
+    #undef OPTION_DIMM_EXCLUDE
+    #define OPTION_DIMM_EXCLUDE  TRUE
+  #endif
+#endif
+
+#if (OPTION_S1G4_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == TRUE)
+    #undef OPTION_FAMILY10H_BL
+    #define OPTION_FAMILY10H_BL  TRUE
+    #undef OPTION_FAMILY10H_DA
+    #define OPTION_FAMILY10H_DA  TRUE
+    #undef OPTION_MEMCTLR_DA
+    #define OPTION_MEMCTLR_DA    TRUE
+    #undef OPTION_HW_WRITE_LEV_TRAINING
+    #define OPTION_HW_WRITE_LEV_TRAINING  TRUE
+    #undef OPTION_OPT_SW_DQS_REC_EN_TRAINING
+    #define OPTION_OPT_SW_DQS_REC_EN_TRAINING  TRUE
+    #undef OPTION_OPT_SW_RD_WR_POS_TRAINING
+    #define OPTION_OPT_SW_RD_WR_POS_TRAINING  TRUE
+    #undef OPTION_MAX_RD_LAT_TRAINING
+    #define OPTION_MAX_RD_LAT_TRAINING  TRUE
+    #undef OPTION_SW_DRAM_INIT
+    #define OPTION_SW_DRAM_INIT  TRUE
+    #undef OPTION_S3_MEM_SUPPORT
+    #define OPTION_S3_MEM_SUPPORT  TRUE
+    #undef OPTION_CPU_CORELEVLING
+    #define OPTION_CPU_CORELEVLING  TRUE
+    #undef OPTION_CPU_CFOH
+    #define OPTION_CPU_CFOH  TRUE
+    #undef OPTION_UDIMMS
+    #define OPTION_UDIMMS  TRUE
+    #undef OPTION_SODIMMS
+    #define OPTION_SODIMMS  TRUE
+    #undef OPTION_DDR3
+    #define OPTION_DDR3  TRUE
+    #undef OPTION_ECC
+    #define OPTION_ECC  TRUE
+    #undef OPTION_BANK_INTERLEAVE
+    #define OPTION_BANK_INTERLEAVE  TRUE
+    #undef OPTION_DCT_INTERLEAVE
+    #define OPTION_DCT_INTERLEAVE  TRUE
+    #undef OPTION_NODE_INTERLEAVE
+    #define OPTION_NODE_INTERLEAVE  TRUE
+    #undef OPTION_MEM_RESTORE
+    #define OPTION_MEM_RESTORE  TRUE
+    #undef OPTION_DIMM_EXCLUDE
+    #define OPTION_DIMM_EXCLUDE  TRUE
+  #endif
+#endif
+
+#if (OPTION_ASB2_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == TRUE)
+    #undef OPTION_FAMILY10H_BL
+    #define OPTION_FAMILY10H_BL  TRUE
+    #undef OPTION_FAMILY10H_DA
+    #define OPTION_FAMILY10H_DA  TRUE
+    #undef OPTION_MEMCTLR_Ni
+    #define OPTION_MEMCTLR_Ni    TRUE
+    #undef OPTION_HW_WRITE_LEV_TRAINING
+    #define OPTION_HW_WRITE_LEV_TRAINING  TRUE
+    #undef OPTION_OPT_SW_DQS_REC_EN_TRAINING
+    #define OPTION_OPT_SW_DQS_REC_EN_TRAINING  TRUE
+    #undef OPTION_OPT_SW_RD_WR_POS_TRAINING
+    #define OPTION_OPT_SW_RD_WR_POS_TRAINING  TRUE
+    #undef OPTION_MAX_RD_LAT_TRAINING
+    #define OPTION_MAX_RD_LAT_TRAINING  TRUE
+    #undef OPTION_SW_DRAM_INIT
+    #define OPTION_SW_DRAM_INIT  TRUE
+    #undef OPTION_S3_MEM_SUPPORT
+    #define OPTION_S3_MEM_SUPPORT  TRUE
+    #undef OPTION_CPU_CORELEVLING
+    #define OPTION_CPU_CORELEVLING  TRUE
+    #undef OPTION_CPU_CFOH
+    #define OPTION_CPU_CFOH  TRUE
+    #undef OPTION_UDIMMS
+    #define OPTION_UDIMMS  TRUE
+    #undef OPTION_SODIMMS
+    #define OPTION_SODIMMS  TRUE
+    #undef OPTION_DDR3
+    #define OPTION_DDR3  TRUE
+    #undef OPTION_ECC
+    #define OPTION_ECC  TRUE
+    #undef OPTION_BANK_INTERLEAVE
+    #define OPTION_BANK_INTERLEAVE  TRUE
+    #undef OPTION_DCT_INTERLEAVE
+    #define OPTION_DCT_INTERLEAVE  TRUE
+    #undef OPTION_NODE_INTERLEAVE
+    #define OPTION_NODE_INTERLEAVE  TRUE
+    #undef OPTION_MEM_RESTORE
+    #define OPTION_MEM_RESTORE  TRUE
+    #undef OPTION_DIMM_EXCLUDE
+    #define OPTION_DIMM_EXCLUDE  TRUE
+  #endif
+#endif
+
+#if (OPTION_AM3_SOCKET_SUPPORT == TRUE)
+  #if (OPTION_FAMILY10H == TRUE)
+    #undef OPTION_FAMILY10H_BL
+    #define OPTION_FAMILY10H_BL  TRUE
+    #undef OPTION_FAMILY10H_DA
+    #define OPTION_FAMILY10H_DA  TRUE
+    #undef OPTION_FAMILY10H_PH
+    #define OPTION_FAMILY10H_PH  TRUE
+    #undef OPTION_FAMILY10H_RB
+    #define OPTION_FAMILY10H_RB  TRUE
+    #undef OPTION_MEMCTLR_RB
+    #define OPTION_MEMCTLR_RB   TRUE
+    #undef OPTION_MEMCTLR_DA
+    #define OPTION_MEMCTLR_DA   TRUE
+    #undef OPTION_MEMCTLR_PH
+    #define OPTION_MEMCTLR_PH   TRUE
+    #undef OPTION_HW_WRITE_LEV_TRAINING
+    #define OPTION_HW_WRITE_LEV_TRAINING  TRUE
+    #undef OPTION_OPT_SW_DQS_REC_EN_TRAINING
+    #define OPTION_OPT_SW_DQS_REC_EN_TRAINING  TRUE
+    #undef OPTION_OPT_SW_RD_WR_POS_TRAINING
+    #define OPTION_OPT_SW_RD_WR_POS_TRAINING  TRUE
+    #undef OPTION_MAX_RD_LAT_TRAINING
+    #define OPTION_MAX_RD_LAT_TRAINING  TRUE
+    #undef OPTION_SW_DRAM_INIT
+    #define OPTION_SW_DRAM_INIT  TRUE
+    #undef OPTION_S3_MEM_SUPPORT
+    #define OPTION_S3_MEM_SUPPORT  TRUE
+    #undef OPTION_CPU_CORELEVLING
+    #define OPTION_CPU_CORELEVLING  TRUE
+    #undef OPTION_CPU_CFOH
+    #define OPTION_CPU_CFOH  TRUE
+    #undef OPTION_IO_CSTATE
+    #define OPTION_IO_CSTATE TRUE
+    #undef OPTION_CPB
+    #define OPTION_CPB  TRUE
+    #undef OPTION_UDIMMS
+    #define OPTION_UDIMMS  TRUE
+    #undef OPTION_SODIMMS
+    #define OPTION_SODIMMS  TRUE
+    #undef OPTION_DDR3
+    #define OPTION_DDR3  TRUE
+    #undef OPTION_ECC
+    #define OPTION_ECC  TRUE
+    #undef OPTION_BANK_INTERLEAVE
+    #define OPTION_BANK_INTERLEAVE  TRUE
+    #undef OPTION_DCT_INTERLEAVE
+    #define OPTION_DCT_INTERLEAVE  TRUE
+    #undef OPTION_NODE_INTERLEAVE
+    #define OPTION_NODE_INTERLEAVE  TRUE
+    #undef OPTION_PARALLEL_TRAINING
+    #define OPTION_PARALLEL_TRAINING  TRUE
+    #undef OPTION_MEM_RESTORE
+    #define OPTION_MEM_RESTORE  TRUE
+    #undef OPTION_ONLINE_SPARE
+    #define OPTION_ONLINE_SPARE TRUE
+    #undef OPTION_DIMM_EXCLUDE
+    #define OPTION_DIMM_EXCLUDE  TRUE
+  #endif
+  #if (OPTION_FAMILY15H_MODEL_0x == TRUE)
+    #undef OPTION_FAMILY15H_OR
+    #define OPTION_FAMILY15H_OR  TRUE
+    #undef OPTION_MEMCTLR_OR
+    #define OPTION_MEMCTLR_OR    TRUE
+    #undef OPTION_HW_WRITE_LEV_TRAINING
+    #define OPTION_HW_WRITE_LEV_TRAINING  TRUE
+    #undef OPTION_CONTINOUS_PATTERN_GENERATION
+    #define OPTION_CONTINOUS_PATTERN_GENERATION  TRUE
+    #undef OPTION_HW_DQS_REC_EN_TRAINING
+    #define OPTION_HW_DQS_REC_EN_TRAINING  TRUE
+    #undef OPTION_HW_DQS_REC_EN_SEED_TRAINING
+    #define OPTION_HW_DQS_REC_EN_SEED_TRAINING      TRUE
+    #undef OPTION_OPT_SW_RD_WR_POS_TRAINING
+    #define OPTION_OPT_SW_RD_WR_POS_TRAINING  TRUE
+    #undef OPTION_MAX_RD_LAT_TRAINING
+    #define OPTION_MAX_RD_LAT_TRAINING  TRUE
+    #undef OPTION_SW_DRAM_INIT
+    #define OPTION_SW_DRAM_INIT  TRUE
+    #undef OPTION_C6_STATE
+    #define OPTION_C6_STATE  TRUE
+    #undef OPTION_IO_CSTATE
+    #define OPTION_IO_CSTATE TRUE
+    #undef OPTION_CPB
+    #define OPTION_CPB  TRUE
+    #undef OPTION_CPU_APM
+    #define OPTION_CPU_APM TRUE
+    #undef OPTION_S3_MEM_SUPPORT
+    #define OPTION_S3_MEM_SUPPORT  TRUE
+    #undef OPTION_ADDR_TO_CS_TRANSLATOR
+    #define OPTION_ADDR_TO_CS_TRANSLATOR  TRUE
+    #undef OPTION_ATM_MODE
+    #define OPTION_ATM_MODE TRUE
+    #undef OPTION_CPU_CORELEVLING
+    #define OPTION_CPU_CORELEVLING  TRUE
+    #undef OPTION_CPU_CFOH
+    #define OPTION_CPU_CFOH  TRUE
+    #undef OPTION_MSG_BASED_C1E
+    #define OPTION_MSG_BASED_C1E  TRUE
+    #undef OPTION_UDIMMS
+    #define OPTION_UDIMMS  TRUE
+    #undef OPTION_RDIMMS
+    #define OPTION_RDIMMS  TRUE
+    #undef OPTION_LRDIMMS
+    #define OPTION_LRDIMMS  TRUE
+    #undef OPTION_SODIMMS
+    #define OPTION_SODIMMS  TRUE
+    #undef OPTION_DDR3
+    #define OPTION_DDR3  TRUE
+    #undef OPTION_ECC
+    #define OPTION_ECC  TRUE
+    #undef OPTION_BANK_INTERLEAVE
+    #define OPTION_BANK_INTERLEAVE  TRUE
+    #undef OPTION_DCT_INTERLEAVE
+    #define OPTION_DCT_INTERLEAVE  TRUE
+    #undef OPTION_NODE_INTERLEAVE
+    #define OPTION_NODE_INTERLEAVE  TRUE
+    #undef OPTION_MEM_RESTORE
+    #define OPTION_MEM_RESTORE  TRUE
+    #undef OPTION_ONLINE_SPARE
+    #define OPTION_ONLINE_SPARE TRUE
+    #undef OPTION_DIMM_EXCLUDE
+    #define OPTION_DIMM_EXCLUDE  TRUE
+  #endif
+#endif
+
+#define OPTION_ACPI_PSTATES             TRUE
+#define OPTION_WHEA                     TRUE
+#define OPTION_DMI                      TRUE
+#define OPTION_EARLY_SAMPLES            FALSE
+#define CFG_ACPI_PSTATES_PPC            TRUE
+#define CFG_ACPI_PSTATES_PCT            TRUE
+#define CFG_ACPI_PSTATES_PSD            TRUE
+#define CFG_ACPI_PSTATES_PSS            TRUE
+#define CFG_ACPI_PSTATES_XPSS           TRUE
+#define CFG_ACPI_PSTATE_PSD_INDPX       FALSE
+#define CFG_VRM_HIGH_SPEED_ENABLE       FALSE
+#define CFG_VRM_NB_HIGH_SPEED_ENABLE    FALSE
+#define OPTION_ALIB                     TRUE
+/*---------------------------------------------------------------------------
+ *       Processing the options:  Second, process the user's selections
+ *--------------------------------------------------------------------------*/
+#ifdef BLDOPT_REMOVE_MULTISOCKET_SUPPORT
+  #if  BLDOPT_REMOVE_MULTISOCKET_SUPPORT == TRUE
+    #undef  OPTION_MULTISOCKET
+    #define OPTION_MULTISOCKET          FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_ECC_SUPPORT
+  #if  BLDOPT_REMOVE_ECC_SUPPORT == TRUE
+    #undef  OPTION_ECC
+    #define OPTION_ECC        FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_UDIMMS_SUPPORT
+  #if  BLDOPT_REMOVE_UDIMMS_SUPPORT == TRUE
+    #undef  OPTION_UDIMMS
+    #define OPTION_UDIMMS               FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_RDIMMS_SUPPORT
+  #if  BLDOPT_REMOVE_RDIMMS_SUPPORT == TRUE
+    #undef  OPTION_RDIMMS
+    #define OPTION_RDIMMS               FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_SODIMMS_SUPPORT
+  #if  BLDOPT_REMOVE_SODIMMS_SUPPORT == TRUE
+    #undef  OPTION_SODIMMS
+    #define OPTION_SODIMMS               FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_LRDIMMS_SUPPORT
+  #if  BLDOPT_REMOVE_LRDIMMS_SUPPORT == TRUE
+    #undef  OPTION_LRDIMMS
+    #define OPTION_LRDIMMS               FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_BANK_INTERLEAVE
+  #if  BLDOPT_REMOVE_BANK_INTERLEAVE == TRUE
+    #undef  OPTION_BANK_INTERLEAVE
+    #define OPTION_BANK_INTERLEAVE      FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_DCT_INTERLEAVE
+  #if  BLDOPT_REMOVE_DCT_INTERLEAVE == TRUE
+    #undef  OPTION_DCT_INTERLEAVE
+    #define OPTION_DCT_INTERLEAVE       FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_NODE_INTERLEAVE
+  #if  BLDOPT_REMOVE_NODE_INTERLEAVE == TRUE
+    #undef  OPTION_NODE_INTERLEAVE
+    #define OPTION_NODE_INTERLEAVE      FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_PARALLEL_TRAINING
+  #if  BLDOPT_REMOVE_PARALLEL_TRAINING == TRUE
+    #undef  OPTION_PARALLEL_TRAINING
+    #define OPTION_PARALLEL_TRAINING    FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT
+  #if  BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT == TRUE
+    #undef  OPTION_ONLINE_SPARE
+    #define OPTION_ONLINE_SPARE         FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_MEM_RESTORE_SUPPORT
+  #if  BLDOPT_REMOVE_MEM_RESTORE_SUPPORT == TRUE
+    #undef  OPTION_MEM_RESTORE
+    #define OPTION_MEM_RESTORE         FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_HW_DQS_REC_EN_SEED_TRAINING
+  #if  BLDOPT_REMOVE_HW_DQS_REC_EN_SEED_TRAINING == TRUE
+    #undef OPTION_HW_DQS_REC_EN_SEED_TRAINING
+    #define OPTION_HW_DQS_REC_EN_SEED_TRAINING      FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_ACPI_PSTATES
+  #if  BLDOPT_REMOVE_ACPI_PSTATES == TRUE
+    #undef  OPTION_ACPI_PSTATES
+    #define OPTION_ACPI_PSTATES         FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_SRAT
+  #if  BLDOPT_REMOVE_SRAT == TRUE
+    #undef  OPTION_SRAT
+    #define OPTION_SRAT                 FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_SLIT
+  #if  BLDOPT_REMOVE_SLIT == TRUE
+    #undef  OPTION_SLIT
+    #define OPTION_SLIT                 FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_WHEA
+  #if  BLDOPT_REMOVE_WHEA == TRUE
+    #undef  OPTION_WHEA
+    #define OPTION_WHEA                 FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_DMI
+  #if  BLDOPT_REMOVE_DMI == TRUE
+    #undef  OPTION_DMI
+    #define OPTION_DMI                  FALSE
+  #endif
+#endif
+#ifdef BLDOPT_REMOVE_ADDR_TO_CS_TRANSLATOR
+  #if  BLDOPT_REMOVE_ADDR_TO_CS_TRANSLATOR == TRUE
+    #undef  OPTION_ADDR_TO_CS_TRANSLATOR
+    #define OPTION_ADDR_TO_CS_TRANSLATOR        FALSE
+  #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_HT_ASSIST
+  #if  BLDOPT_REMOVE_HT_ASSIST == TRUE
+    #undef  OPTION_HT_ASSIST
+    #define OPTION_HT_ASSIST      FALSE
+  #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_ATM_MODE
+  #if  BLDOPT_REMOVE_ATM_MODE == TRUE
+    #undef  OPTION_ATM_MODE
+    #define OPTION_ATM_MODE      FALSE
+  #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_MSG_BASED_C1E
+  #if  BLDOPT_REMOVE_MSG_BASED_C1E == TRUE
+    #undef  OPTION_MSG_BASED_C1E
+    #define OPTION_MSG_BASED_C1E      FALSE
+  #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_C6_STATE
+  #if  BLDOPT_REMOVE_C6_STATE == TRUE
+    #undef  OPTION_C6_STATE
+    #define OPTION_C6_STATE      FALSE
+  #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_GFX_RECOVERY
+  #if  BLDOPT_REMOVE_GFX_RECOVERY == TRUE
+    #undef  OPTION_GFX_RECOVERY
+    #define OPTION_GFX_RECOVERY         FALSE
+  #endif
+#endif
+
+#ifdef BLDCFG_REMOVE_ACPI_PSTATES_PPC
+  #if  BLDCFG_REMOVE_ACPI_PSTATES_PPC == TRUE
+    #undef  CFG_ACPI_PSTATES_PPC
+    #define CFG_ACPI_PSTATES_PPC        FALSE
+  #endif
+#endif
+
+#ifdef BLDCFG_REMOVE_ACPI_PSTATES_PCT
+  #if  BLDCFG_REMOVE_ACPI_PSTATES_PCT == TRUE
+    #undef  CFG_ACPI_PSTATES_PCT
+    #define CFG_ACPI_PSTATES_PCT        FALSE
+  #endif
+#endif
+
+#ifdef BLDCFG_REMOVE_ACPI_PSTATES_PSD
+  #if  BLDCFG_REMOVE_ACPI_PSTATES_PSD == TRUE
+    #undef  CFG_ACPI_PSTATES_PSD
+    #define CFG_ACPI_PSTATES_PSD        FALSE
+  #endif
+#endif
+
+#ifdef BLDCFG_REMOVE_ACPI_PSTATES_PSS
+  #if  BLDCFG_REMOVE_ACPI_PSTATES_PSS == TRUE
+    #undef  CFG_ACPI_PSTATES_PSS
+    #define CFG_ACPI_PSTATES_PSS        FALSE
+  #endif
+#endif
+
+#ifdef BLDCFG_REMOVE_ACPI_PSTATES_XPSS
+  #if  BLDCFG_REMOVE_ACPI_PSTATES_XPSS == TRUE
+    #undef  CFG_ACPI_PSTATES_XPSS
+    #define CFG_ACPI_PSTATES_XPSS       FALSE
+  #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT
+  #if  BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT  == TRUE
+    #undef  OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT
+    #define OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT    FALSE
+  #endif
+#endif
+
+#ifdef BLDCFG_PSTATE_HPC_MODE
+  #if  BLDCFG_PSTATE_HPC_MODE  == TRUE
+    #undef  OPTION_CPU_PSTATE_HPC_MODE
+    #define OPTION_CPU_PSTATE_HPC_MODE    TRUE
+  #endif
+#endif
+
+#ifdef BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT
+  #if  BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT == TRUE
+    #undef  CFG_ACPI_PSTATE_PSD_INDPX
+    #define CFG_ACPI_PSTATE_PSD_INDPX       TRUE
+  #endif
+#endif
+
+#ifdef BLDCFG_VRM_HIGH_SPEED_ENABLE
+  #if  BLDCFG_VRM_HIGH_SPEED_ENABLE == TRUE
+    #undef  CFG_VRM_HIGH_SPEED_ENABLE
+    #define CFG_VRM_HIGH_SPEED_ENABLE       TRUE
+  #endif
+#endif
+
+#ifdef BLDCFG_VRM_NB_HIGH_SPEED_ENABLE
+  #if BLDCFG_VRM_NB_HIGH_SPEED_ENABLE == TRUE
+    #undef CFG_VRM_NB_HIGH_SPEED_ENABLE
+    #define CFG_VRM_NB_HIGH_SPEED_ENABLE    TRUE
+  #endif
+#endif
+
+#ifdef BLDCFG_STARTING_BUSNUM
+  #define CFG_STARTING_BUSNUM         (BLDCFG_STARTING_BUSNUM)
+#else
+  #define CFG_STARTING_BUSNUM         (0)
+#endif
+
+#ifdef BLDCFG_AMD_PLATFORM_TYPE
+  #define CFG_AMD_PLATFORM_TYPE              BLDCFG_AMD_PLATFORM_TYPE
+#else
+  #define CFG_AMD_PLATFORM_TYPE              0
+#endif
+
+CONST UINT32 ROMDATA AmdPlatformTypeCgf = CFG_AMD_PLATFORM_TYPE;
+
+#ifdef BLDCFG_MAXIMUM_BUSNUM
+  #define CFG_MAXIMUM_BUSNUM          (BLDCFG_MAXIMUM_BUSNUM)
+#else
+  #define CFG_MAXIMUM_BUSNUM          (0xF8)
+#endif
+
+#ifdef BLDCFG_ALLOCATED_BUSNUM
+  #define CFG_ALLOCATED_BUSNUM        (BLDCFG_ALLOCATED_BUSNUM)
+#else
+  #define CFG_ALLOCATED_BUSNUM        (0x20)
+#endif
+
+#ifdef BLDCFG_BUID_SWAP_LIST
+  #define CFG_BUID_SWAP_LIST         (BLDCFG_BUID_SWAP_LIST)
+#else
+  #define CFG_BUID_SWAP_LIST         (NULL)
+#endif
+
+#ifdef BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST
+  #define CFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST         (BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST)
+#else
+  #define CFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST         (NULL)
+#endif
+
+#ifdef BLDCFG_HTFABRIC_LIMITS_LIST
+  #define CFG_HTFABRIC_LIMITS_LIST         (BLDCFG_HTFABRIC_LIMITS_LIST)
+#else
+  #define CFG_HTFABRIC_LIMITS_LIST         (NULL)
+#endif
+
+#ifdef BLDCFG_HTCHAIN_LIMITS_LIST
+  #define CFG_HTCHAIN_LIMITS_LIST         (BLDCFG_HTCHAIN_LIMITS_LIST)
+#else
+  #define CFG_HTCHAIN_LIMITS_LIST         (NULL)
+#endif
+
+#ifdef BLDCFG_BUS_NUMBERS_LIST
+  #define CFG_BUS_NUMBERS_LIST         (BLDCFG_BUS_NUMBERS_LIST)
+#else
+  #define CFG_BUS_NUMBERS_LIST         (NULL)
+#endif
+
+#ifdef BLDCFG_IGNORE_LINK_LIST
+  #define CFG_IGNORE_LINK_LIST         (BLDCFG_IGNORE_LINK_LIST)
+#else
+  #define CFG_IGNORE_LINK_LIST         (NULL)
+#endif
+
+#ifdef BLDCFG_LINK_SKIP_REGANG_LIST
+  #define CFG_LINK_SKIP_REGANG_LIST         (BLDCFG_LINK_SKIP_REGANG_LIST)
+#else
+  #define CFG_LINK_SKIP_REGANG_LIST         (NULL)
+#endif
+
+#ifdef BLDCFG_SET_HTCRC_SYNC_FLOOD
+  #define CFG_SET_HTCRC_SYNC_FLOOD         (BLDCFG_SET_HTCRC_SYNC_FLOOD)
+#else
+  #define CFG_SET_HTCRC_SYNC_FLOOD         (FALSE)
+#endif
+
+#ifdef BLDCFG_USE_UNIT_ID_CLUMPING
+  #define CFG_USE_UNIT_ID_CLUMPING         (BLDCFG_USE_UNIT_ID_CLUMPING)
+#else
+  #define CFG_USE_UNIT_ID_CLUMPING         (FALSE)
+#endif
+
+#ifdef BLDCFG_ADDITIONAL_TOPOLOGIES_LIST
+  #define CFG_ADDITIONAL_TOPOLOGIES_LIST         (BLDCFG_ADDITIONAL_TOPOLOGIES_LIST)
+#else
+  #define CFG_ADDITIONAL_TOPOLOGIES_LIST         (NULL)
+#endif
+
+#ifdef BLDCFG_USE_HT_ASSIST
+  #define CFG_USE_HT_ASSIST               (BLDCFG_USE_HT_ASSIST)
+#else
+  #define CFG_USE_HT_ASSIST               (TRUE)
+#endif
+
+#ifdef BLDCFG_USE_ATM_MODE
+  #define CFG_USE_ATM_MODE                (BLDCFG_USE_ATM_MODE)
+#else
+  #define CFG_USE_ATM_MODE                (TRUE)
+#endif
+
+#ifdef BLDCFG_PLATFORM_CONTROL_FLOW_MODE
+  #define CFG_PLATFORM_CONTROL_FLOW_MODE  (BLDCFG_PLATFORM_CONTROL_FLOW_MODE)
+#else
+  #define CFG_PLATFORM_CONTROL_FLOW_MODE  (Nfcm)
+#endif
+
+#ifdef BLDCFG_PERFORMANCE_HARDWARE_PREFETCHER
+  #define CFG_PERFORMANCE_HARDWARE_PREFETCHER  (BLDCFG_PERFORMANCE_HARDWARE_PREFETCHER)
+#else
+  #define CFG_PERFORMANCE_HARDWARE_PREFETCHER  (HARDWARE_PREFETCHER_AUTO)
+#endif
+
+#ifdef BLDCFG_PERFORMANCE_SOFTWARE_PREFETCHES
+  #define CFG_PERFORMANCE_SOFTWARE_PREFETCHES  (BLDCFG_PERFORMANCE_SOFTWARE_PREFETCHES)
+#else
+  #define CFG_PERFORMANCE_SOFTWARE_PREFETCHES  (SOFTWARE_PREFETCHES_AUTO)
+#endif
+
+#ifdef BLDCFG_PERFORMANCE_DRAM_PREFETCHER
+  #define CFG_PERFORMANCE_DRAM_PREFETCHER  (BLDCFG_PERFORMANCE_DRAM_PREFETCHER)
+#else
+  #define CFG_PERFORMANCE_DRAM_PREFETCHER  (DRAM_PREFETCHER_AUTO)
+#endif
+
+#ifdef BLDCFG_PLATFORM_DEEMPHASIS_LIST
+  #define CFG_PLATFORM_DEEMPHASIS_LIST  (BLDCFG_PLATFORM_DEEMPHASIS_LIST)
+#else
+  #define CFG_PLATFORM_DEEMPHASIS_LIST  (NULL)
+#endif
+
+#ifdef BLDCFG_VRM_ADDITIONAL_DELAY
+  #define CFG_VRM_ADDITIONAL_DELAY      (BLDCFG_VRM_ADDITIONAL_DELAY)
+#else
+  #define CFG_VRM_ADDITIONAL_DELAY      (0)
+#endif
+
+#ifdef BLDCFG_VRM_CURRENT_LIMIT
+  #define CFG_VRM_CURRENT_LIMIT            BLDCFG_VRM_CURRENT_LIMIT
+#else
+  #define CFG_VRM_CURRENT_LIMIT            0
+#endif
+
+#ifdef BLDCFG_VRM_LOW_POWER_THRESHOLD
+  #define CFG_VRM_LOW_POWER_THRESHOLD      BLDCFG_VRM_LOW_POWER_THRESHOLD
+#else
+  #define CFG_VRM_LOW_POWER_THRESHOLD      0
+#endif
+
+#ifdef BLDCFG_VRM_SLEW_RATE
+  #define CFG_VRM_SLEW_RATE                BLDCFG_VRM_SLEW_RATE
+#else
+  #define CFG_VRM_SLEW_RATE                DFLT_VRM_SLEW_RATE
+#endif
+
+#ifdef BLDCFG_VRM_INRUSH_CURRENT_LIMIT
+  #define CFG_VRM_INRUSH_CURRENT_LIMIT     BLDCFG_VRM_INRUSH_CURRENT_LIMIT
+#else
+  #define CFG_VRM_INRUSH_CURRENT_LIMIT     0
+#endif
+
+#ifdef BLDCFG_VRM_NB_ADDITIONAL_DELAY
+  #define CFG_VRM_NB_ADDITIONAL_DELAY      (BLDCFG_VRM_NB_ADDITIONAL_DELAY)
+#else
+  #define CFG_VRM_NB_ADDITIONAL_DELAY      (0)
+#endif
+
+#ifdef BLDCFG_VRM_NB_CURRENT_LIMIT
+  #define CFG_VRM_NB_CURRENT_LIMIT         BLDCFG_VRM_NB_CURRENT_LIMIT
+#else
+  #define CFG_VRM_NB_CURRENT_LIMIT         (0)
+#endif
+
+#ifdef BLDCFG_VRM_NB_LOW_POWER_THRESHOLD
+  #define CFG_VRM_NB_LOW_POWER_THRESHOLD   BLDCFG_VRM_NB_LOW_POWER_THRESHOLD
+#else
+  #define CFG_VRM_NB_LOW_POWER_THRESHOLD   (0)
+#endif
+
+#ifdef BLDCFG_VRM_NB_SLEW_RATE
+  #define CFG_VRM_NB_SLEW_RATE             BLDCFG_VRM_NB_SLEW_RATE
+#else
+  #define CFG_VRM_NB_SLEW_RATE             DFLT_VRM_SLEW_RATE
+#endif
+
+#ifdef BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT
+  #define CFG_VRM_NB_INRUSH_CURRENT_LIMIT  BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT
+#else
+  #define CFG_VRM_NB_INRUSH_CURRENT_LIMIT  (0)
+#endif
+
+
+#ifdef BLDCFG_PLAT_NUM_IO_APICS
+  #define CFG_PLAT_NUM_IO_APICS            BLDCFG_PLAT_NUM_IO_APICS
+#else
+  #define CFG_PLAT_NUM_IO_APICS            0
+#endif
+
+#ifdef BLDCFG_MEM_INIT_PSTATE
+  #define CFG_MEM_INIT_PSTATE              BLDCFG_MEM_INIT_PSTATE
+#else
+  #define CFG_MEM_INIT_PSTATE              0
+#endif
+
+#ifdef BLDCFG_PLATFORM_C1E_MODE
+  #define CFG_C1E_MODE                        BLDCFG_PLATFORM_C1E_MODE
+#else
+  #define CFG_C1E_MODE                        C1eModeDisabled
+#endif
+
+#ifdef BLDCFG_PLATFORM_C1E_OPDATA
+  #define CFG_C1E_OPDATA                      BLDCFG_PLATFORM_C1E_OPDATA
+#else
+  #define CFG_C1E_OPDATA                      0
+#endif
+
+#ifdef BLDCFG_PLATFORM_C1E_OPDATA1
+  #define CFG_C1E_OPDATA1                     BLDCFG_PLATFORM_C1E_OPDATA1
+#else
+  #define CFG_C1E_OPDATA1                     0
+#endif
+
+#ifdef BLDCFG_PLATFORM_C1E_OPDATA2
+  #define CFG_C1E_OPDATA2                     BLDCFG_PLATFORM_C1E_OPDATA2
+#else
+  #define CFG_C1E_OPDATA2                     0
+#endif
+
+#ifdef BLDCFG_PLATFORM_C1E_OPDATA3
+  #define CFG_C1E_OPDATA3                     BLDCFG_PLATFORM_C1E_OPDATA3
+#else
+  #define CFG_C1E_OPDATA3                     0
+#endif
+
+#ifdef BLDCFG_PLATFORM_CSTATE_MODE
+  #define CFG_CSTATE_MODE                     BLDCFG_PLATFORM_CSTATE_MODE
+#else
+  #define CFG_CSTATE_MODE                     CStateModeDisabled
+#endif
+
+#ifdef BLDCFG_PLATFORM_CSTATE_OPDATA
+  #define CFG_CSTATE_OPDATA                   BLDCFG_PLATFORM_CSTATE_OPDATA
+#else
+  #define CFG_CSTATE_OPDATA                   0
+#endif
+
+#ifdef BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS
+  #define CFG_CSTATE_IO_BASE_ADDRESS       BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS
+#else
+  #define CFG_CSTATE_IO_BASE_ADDRESS       0
+#endif
+
+#ifdef BLDCFG_PLATFORM_CPB_MODE
+  #define CFG_CPB_MODE                        BLDCFG_PLATFORM_CPB_MODE
+#else
+  #define CFG_CPB_MODE                        CpbModeAuto
+#endif
+
+#ifdef BLDCFG_CORE_LEVELING_MODE
+  #define CFG_CORE_LEVELING_MODE           BLDCFG_CORE_LEVELING_MODE
+#else
+  #define CFG_CORE_LEVELING_MODE           0
+#endif
+
+#ifdef BLDCFG_AMD_PSTATE_CAP_VALUE
+  #define CFG_AMD_PSTATE_CAP_VALUE           BLDCFG_AMD_PSTATE_CAP_VALUE
+#else
+  #define CFG_AMD_PSTATE_CAP_VALUE           0
+#endif
+
+#ifdef BLDCFG_HEAP_DRAM_ADDRESS
+  #define CFG_HEAP_DRAM_ADDRESS                 BLDCFG_HEAP_DRAM_ADDRESS
+#else
+  #define CFG_HEAP_DRAM_ADDRESS                 AMD_HEAP_RAM_ADDRESS
+#endif
+
+#ifdef BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT
+  #define CFG_MEMORY_BUS_FREQUENCY_LIMIT        BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT
+#else
+  #define CFG_MEMORY_BUS_FREQUENCY_LIMIT        DDR800_FREQUENCY
+#endif
+
+#ifdef BLDCFG_MEMORY_MODE_UNGANGED
+  #define CFG_MEMORY_MODE_UNGANGED              BLDCFG_MEMORY_MODE_UNGANGED
+#else
+  #define CFG_MEMORY_MODE_UNGANGED              TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_QUAD_RANK_CAPABLE
+  #define CFG_MEMORY_QUAD_RANK_CAPABLE          BLDCFG_MEMORY_QUAD_RANK_CAPABLE
+#else
+  #define CFG_MEMORY_QUAD_RANK_CAPABLE          TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_QUADRANK_TYPE
+  #define CFG_MEMORY_QUADRANK_TYPE              BLDCFG_MEMORY_QUADRANK_TYPE
+#else
+  #define CFG_MEMORY_QUADRANK_TYPE              DFLT_MEMORY_QUADRANK_TYPE
+#endif
+
+#ifdef BLDCFG_MEMORY_RDIMM_CAPABLE
+  #define CFG_MEMORY_RDIMM_CAPABLE              BLDCFG_MEMORY_RDIMM_CAPABLE
+#else
+  #define CFG_MEMORY_RDIMM_CAPABLE              TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_LRDIMM_CAPABLE
+  #define CFG_MEMORY_LRDIMM_CAPABLE              BLDCFG_MEMORY_LRDIMM_CAPABLE
+#else
+  #define CFG_MEMORY_LRDIMM_CAPABLE              TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_UDIMM_CAPABLE
+  #define CFG_MEMORY_UDIMM_CAPABLE              BLDCFG_MEMORY_UDIMM_CAPABLE
+#else
+  #define CFG_MEMORY_UDIMM_CAPABLE              TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_SODIMM_CAPABLE
+  #define CFG_MEMORY_SODIMM_CAPABLE             BLDCFG_MEMORY_SODIMM_CAPABLE
+#else
+  #define CFG_MEMORY_SODIMM_CAPABLE             FALSE
+#endif
+
+#ifdef BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB
+  #define CFG_LIMIT_MEMORY_TO_BELOW_1TB         BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB
+#else
+  #define CFG_LIMIT_MEMORY_TO_BELOW_1TB         TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING
+  #define CFG_MEMORY_ENABLE_BANK_INTERLEAVING   BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING
+#else
+  #define CFG_MEMORY_ENABLE_BANK_INTERLEAVING   TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING
+  #define CFG_MEMORY_ENABLE_NODE_INTERLEAVING   BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING
+#else
+  #define CFG_MEMORY_ENABLE_NODE_INTERLEAVING   FALSE
+#endif
+
+#ifdef BLDCFG_MEMORY_CHANNEL_INTERLEAVING
+  #define CFG_MEMORY_CHANNEL_INTERLEAVING       BLDCFG_MEMORY_CHANNEL_INTERLEAVING
+#else
+  #define CFG_MEMORY_CHANNEL_INTERLEAVING       TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_POWER_DOWN
+  #define CFG_MEMORY_POWER_DOWN                 BLDCFG_MEMORY_POWER_DOWN
+#else
+  #define CFG_MEMORY_POWER_DOWN                 FALSE
+#endif
+
+#ifdef BLDCFG_POWER_DOWN_MODE
+  #define CFG_POWER_DOWN_MODE                   BLDCFG_POWER_DOWN_MODE
+#else
+  #define CFG_POWER_DOWN_MODE                   POWER_DOWN_MODE_AUTO
+#endif
+
+#ifdef BLDCFG_ONLINE_SPARE
+  #define CFG_ONLINE_SPARE                      BLDCFG_ONLINE_SPARE
+#else
+  #define CFG_ONLINE_SPARE                      FALSE
+#endif
+
+#ifdef BLDCFG_MEMORY_PARITY_ENABLE
+  #define CFG_MEMORY_PARITY_ENABLE              BLDCFG_MEMORY_PARITY_ENABLE
+#else
+  #define CFG_MEMORY_PARITY_ENABLE              FALSE
+#endif
+
+#ifdef BLDCFG_BANK_SWIZZLE
+  #define CFG_BANK_SWIZZLE                      BLDCFG_BANK_SWIZZLE
+#else
+  #define CFG_BANK_SWIZZLE                      TRUE
+#endif
+
+#ifdef BLDCFG_TIMING_MODE_SELECT
+  #define CFG_TIMING_MODE_SELECT                BLDCFG_TIMING_MODE_SELECT
+#else
+  #define CFG_TIMING_MODE_SELECT                TIMING_MODE_AUTO
+#endif
+
+#ifdef BLDCFG_MEMORY_CLOCK_SELECT
+  #define CFG_MEMORY_CLOCK_SELECT               BLDCFG_MEMORY_CLOCK_SELECT
+#else
+  #define CFG_MEMORY_CLOCK_SELECT               DDR800_FREQUENCY
+#endif
+
+#ifdef BLDCFG_DQS_TRAINING_CONTROL
+  #define CFG_DQS_TRAINING_CONTROL              BLDCFG_DQS_TRAINING_CONTROL
+#else
+  #define CFG_DQS_TRAINING_CONTROL              TRUE
+#endif
+
+#ifdef BLDCFG_IGNORE_SPD_CHECKSUM
+  #define CFG_IGNORE_SPD_CHECKSUM               BLDCFG_IGNORE_SPD_CHECKSUM
+#else
+  #define CFG_IGNORE_SPD_CHECKSUM               FALSE
+#endif
+
+#ifdef BLDCFG_USE_BURST_MODE
+  #define CFG_USE_BURST_MODE                    BLDCFG_USE_BURST_MODE
+#else
+  #define CFG_USE_BURST_MODE                    FALSE
+#endif
+
+#ifdef BLDCFG_MEMORY_ALL_CLOCKS_ON
+  #define CFG_MEMORY_ALL_CLOCKS_ON              BLDCFG_MEMORY_ALL_CLOCKS_ON
+#else
+  #define CFG_MEMORY_ALL_CLOCKS_ON              FALSE
+#endif
+
+#ifdef BLDCFG_ENABLE_ECC_FEATURE
+  #define CFG_ENABLE_ECC_FEATURE                BLDCFG_ENABLE_ECC_FEATURE
+#else
+  #define CFG_ENABLE_ECC_FEATURE                TRUE
+#endif
+
+#ifdef BLDCFG_ECC_REDIRECTION
+  #define CFG_ECC_REDIRECTION                   BLDCFG_ECC_REDIRECTION
+#else
+  #define CFG_ECC_REDIRECTION                   FALSE
+#endif
+
+#ifdef BLDCFG_SCRUB_DRAM_RATE
+  #define CFG_SCRUB_DRAM_RATE         BLDCFG_SCRUB_DRAM_RATE
+#else
+  #define CFG_SCRUB_DRAM_RATE         DFLT_SCRUB_DRAM_RATE
+#endif
+
+#ifdef BLDCFG_SCRUB_L2_RATE
+  #define CFG_SCRUB_L2_RATE           BLDCFG_SCRUB_L2_RATE
+#else
+  #define CFG_SCRUB_L2_RATE           DFLT_SCRUB_L2_RATE
+#endif
+
+#ifdef BLDCFG_SCRUB_L3_RATE
+  #define CFG_SCRUB_L3_RATE           BLDCFG_SCRUB_L3_RATE
+#else
+  #define CFG_SCRUB_L3_RATE           DFLT_SCRUB_L3_RATE
+#endif
+
+#ifdef BLDCFG_SCRUB_IC_RATE
+  #define CFG_SCRUB_IC_RATE           BLDCFG_SCRUB_IC_RATE
+#else
+  #define CFG_SCRUB_IC_RATE           DFLT_SCRUB_IC_RATE
+#endif
+
+#ifdef BLDCFG_SCRUB_DC_RATE
+  #define CFG_SCRUB_DC_RATE           BLDCFG_SCRUB_DC_RATE
+#else
+  #define CFG_SCRUB_DC_RATE           DFLT_SCRUB_DC_RATE
+#endif
+
+#ifdef BLDCFG_ECC_SYNC_FLOOD
+  #define CFG_ECC_SYNC_FLOOD          BLDCFG_ECC_SYNC_FLOOD
+#else
+  #define CFG_ECC_SYNC_FLOOD          TRUE
+#endif
+
+#ifdef BLDCFG_ECC_SYMBOL_SIZE
+  #define CFG_ECC_SYMBOL_SIZE         BLDCFG_ECC_SYMBOL_SIZE
+#else
+  #define CFG_ECC_SYMBOL_SIZE         0
+#endif
+
+#ifdef BLDCFG_1GB_ALIGN
+  #define CFG_1GB_ALIGN               BLDCFG_1GB_ALIGN
+#else
+  #define CFG_1GB_ALIGN               FALSE
+#endif
+
+#ifdef BLDCFG_UMA_ALLOCATION_MODE
+  #define CFG_UMA_MODE                BLDCFG_UMA_ALLOCATION_MODE
+#else
+  #define CFG_UMA_MODE                UMA_AUTO
+#endif
+
+#ifdef BLDCFG_FORCE_TRAINING_MODE
+  #define CFG_FORCE_TRAIN_MODE                BLDCFG_FORCE_TRAINING_MODE
+#else
+  #define CFG_FORCE_TRAIN_MODE                FORCE_TRAIN_AUTO
+#endif
+
+#ifdef BLDCFG_UMA_ALLOCATION_SIZE
+  #define CFG_UMA_SIZE                BLDCFG_UMA_ALLOCATION_SIZE
+#else
+  #define CFG_UMA_SIZE                0
+#endif
+
+#ifdef BLDCFG_UMA_ABOVE4G_SUPPORT
+  #define CFG_UMA_ABOVE4G           BLDCFG_UMA_ABOVE4G_SUPPORT
+#else
+  #define CFG_UMA_ABOVE4G           FALSE
+#endif
+
+#ifdef BLDCFG_UMA_ALIGNMENT
+  #define CFG_UMA_ALIGNMENT           BLDCFG_UMA_ALIGNMENT
+#else
+  #define CFG_UMA_ALIGNMENT           NO_UMA_ALIGNED
+#endif
+
+#ifdef BLDCFG_PROCESSOR_SCOPE_IN_SB
+  #define CFG_PROCESSOR_SCOPE_IN_SB   BLDCFG_PROCESSOR_SCOPE_IN_SB
+#else
+  #define CFG_PROCESSOR_SCOPE_IN_SB   FALSE
+#endif
+
+#ifdef BLDCFG_S3_LATE_RESTORE
+  #define CFG_S3_LATE_RESTORE         BLDCFG_S3_LATE_RESTORE
+#else
+  #define CFG_S3_LATE_RESTORE         TRUE
+#endif
+
+#ifdef BLDCFG_USE_32_BYTE_REFRESH
+  #define CFG_USE_32_BYTE_REFRESH  (BLDCFG_USE_32_BYTE_REFRESH)
+#else
+  #define CFG_USE_32_BYTE_REFRESH  (FALSE)
+#endif
+
+#ifdef BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY
+  #define CFG_USE_VARIABLE_MCT_ISOC_PRIORITY  (BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY)
+#else
+  #define CFG_USE_VARIABLE_MCT_ISOC_PRIORITY  (FALSE)
+#endif
+
+#ifdef BLDCFG_PROCESSOR_SCOPE_NAME0
+  #define CFG_PROCESSOR_SCOPE_NAME0          BLDCFG_PROCESSOR_SCOPE_NAME0
+#else
+  #define CFG_PROCESSOR_SCOPE_NAME0          SCOPE_NAME_VALUE
+#endif
+
+#ifdef BLDCFG_PROCESSOR_SCOPE_NAME1
+  #define CFG_PROCESSOR_SCOPE_NAME1          BLDCFG_PROCESSOR_SCOPE_NAME1
+#else
+  #define CFG_PROCESSOR_SCOPE_NAME1          SCOPE_NAME_VALUE1
+#endif
+
+#ifdef BLDCFG_CFG_GNB_HD_AUDIO
+  #define CFG_GNB_HD_AUDIO                   BLDCFG_CFG_GNB_HD_AUDIO
+#else
+  #define CFG_GNB_HD_AUDIO                   TRUE
+#endif
+
+#ifdef BLDCFG_CFG_ABM_SUPPORT
+  #define CFG_ABM_SUPPORT                    BLDCFG_CFG_ABM_SUPPORT
+#else
+  #define CFG_ABM_SUPPORT                    FALSE
+#endif
+
+#ifdef BLDCFG_CFG_DYNAMIC_REFRESH_RATE
+  #define CFG_DINAMIC_REFRESH_RATE           BLDCFG_CFG_DYNAMIC_REFRESH_RATE
+#else
+  #define CFG_DYNAMIC_REFRESH_RATE           0
+#endif
+
+#ifdef BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL
+  #define CFG_LCD_BACK_LIGHT_CONTROL         BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL
+#else
+  #define CFG_LCD_BACK_LIGHT_CONTROL         0
+#endif
+
+#ifdef BLDCFG_STEREO_3D_PINOUT
+  #define CFG_GNB_STEREO_3D_PINOUT           BLDCFG_STEREO_3D_PINOUT
+#else
+  #define CFG_GNB_STEREO_3D_PINOUT           0
+#endif
+
+#ifdef BLDCFG_REMOTE_DISPLAY_SUPPORT
+  #define CFG_GNB_REMOTE_DISPLAY_SUPPORT     BLDCFG_REMOTE_DISPLAY_SUPPORT
+#else
+  #define CFG_GNB_REMOTE_DISPLAY_SUPPORT     FALSE
+#endif
+
+#ifdef BLDCFG_IGPU_SUBSYSTEM_ID
+  #define CFG_GNB_IGPU_SSID                  BLDCFG_IGPU_SUBSYSTEM_ID
+#else
+  #define CFG_GNB_IGPU_SSID                  0
+#endif
+
+#ifdef BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID
+  #define CFG_GNB_HDAUDIO_SSID               BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID
+#else
+  #define CFG_GNB_HDAUDIO_SSID               0
+#endif
+
+#ifdef BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID
+  #define CFG_GNB_PCIE_SSID                  BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID
+#else
+  #define CFG_GNB_PCIE_SSID                  0x12341022
+#endif
+
+#ifdef BLDCFG_GFX_LVDS_SPREAD_SPECTRUM
+  #define CFG_GFX_LVDS_SPREAD_SPECTRUM               BLDCFG_GFX_LVDS_SPREAD_SPECTRUM
+#else
+  #define CFG_GFX_LVDS_SPREAD_SPECTRUM               0
+#endif
+
+#ifdef BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE
+  #define CFG_GFX_LVDS_SPREAD_SPECTRUM_RATE               BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE
+#else
+  #define CFG_GFX_LVDS_SPREAD_SPECTRUM_RATE               0
+#endif
+
+#ifdef BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM
+  #define CFG_PCIE_REFCLK_SPREAD_SPECTRUM               BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM
+#else
+  #define CFG_PCIE_REFCLK_SPREAD_SPECTRUM               0
+#endif
+
+#ifdef BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS
+  #define CFG_TEMP_PCIE_MMIO_BASE_ADDRESS    BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS
+#else
+  #define CFG_TEMP_PCIE_MMIO_BASE_ADDRESS    0xD0000000
+#endif
+
+#ifdef BLDCFG_ENABLE_EXTERNAL_VREF_FEATURE
+  #define CFG_ENABLE_EXTERNAL_VREF                BLDCFG_ENABLE_EXTERNAL_VREF_FEATURE
+#else
+  #define CFG_ENABLE_EXTERNAL_VREF                FALSE
+#endif
+
+#ifdef BLDOPT_REMOVE_EARLY_SAMPLES
+  #if  BLDOPT_REMOVE_EARLY_SAMPLES == TRUE
+    #undef  OPTION_EARLY_SAMPLES
+    #define OPTION_EARLY_SAMPLES        FALSE
+  #else
+    #undef  OPTION_EARLY_SAMPLES
+    #define OPTION_EARLY_SAMPLES        TRUE
+  #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_ALIB
+  #if  BLDOPT_REMOVE_ALIB == TRUE
+    #undef  OPTION_ALIB
+    #define OPTION_ALIB                 FALSE
+  #else
+    #undef  OPTION_ALIB
+    #define OPTION_ALIB                 TRUE
+  #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_FCH_COMPONENT
+  #if BLDOPT_REMOVE_FCH_COMPONENT == TRUE
+    #undef FCH_SUPPORT
+    #define FCH_SUPPORT                            FALSE
+  #endif
+#endif
+
+#ifdef BLDCFG_IOMMU_SUPPORT
+  #define CFG_IOMMU_SUPPORT             BLDCFG_IOMMU_SUPPORT
+#else
+  #define CFG_IOMMU_SUPPORT             TRUE
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE
+  #define CFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE             BLDCFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE
+#else
+  #define CFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE             0
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL
+  #define CFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL           BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL
+#else
+  #define CFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL           0
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON
+  #define CFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON             BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON
+#else
+  #define CFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON             0
+#endif
+
+#ifdef BLDCFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE
+  #define CFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE          BLDCFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE
+#else
+  #define CFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE          0
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY
+  #define CFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY         BLDCFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY
+#else
+  #define CFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY         0
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON
+  #define CFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON         BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON
+#else
+  #define CFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON         0
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL
+  #define CFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL         BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL
+#else
+  #define CFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL         0
+#endif
+
+#ifdef BLDCFG_LVDS_MAX_PIXEL_CLOCK_FREQ
+  #define CFG_LVDS_MAX_PIXEL_CLOCK_FREQ             BLDCFG_LVDS_MAX_PIXEL_CLOCK_FREQ
+#else
+  #define CFG_LVDS_MAX_PIXEL_CLOCK_FREQ             0
+#endif
+
+#ifdef BLDCFG_LCD_BIT_DEPTH_CONTROL_VALUE
+  #define CFG_LCD_BIT_DEPTH_CONTROL_VALUE           BLDCFG_LCD_BIT_DEPTH_CONTROL_VALUE
+#else
+  #define CFG_LCD_BIT_DEPTH_CONTROL_VALUE           0
+#endif
+
+
+// BLDCFG_LVDS_24BBP_PANEL_MODE
+// This specifies the LVDS 24 BBP mode.
+// 0 - Use LDI mode (default).
+// 1 - Use FPDI mode.
+#ifdef BLDCFG_LVDS_24BBP_PANEL_MODE
+  #define CFG_LVDS_24BBP_PANEL_MODE                 BLDCFG_LVDS_24BBP_PANEL_MODE
+#else
+  #define CFG_LVDS_24BBP_PANEL_MODE                 0
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_888_FPDI_MODE
+  #define CFG_LVDS_MISC_888_FPDI_MODE                 BLDCFG_LVDS_MISC_888_FPDI_MODE
+#else
+  #define CFG_LVDS_MISC_888_FPDI_MODE                 FALSE
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_DL_CH_SWAP
+  #define CFG_LVDS_MISC_DL_CH_SWAP                 BLDCFG_LVDS_MISC_DL_CH_SWAP
+#else
+  #define CFG_LVDS_MISC_DL_CH_SWAP                 FALSE
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_VSYNC_ACTIVE_LOW
+  #define CFG_LVDS_MISC_VSYNC_ACTIVE_LOW                 BLDCFG_LVDS_MISC_VSYNC_ACTIVE_LOW
+#else
+  #define CFG_LVDS_MISC_VSYNC_ACTIVE_LOW                 FALSE
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_HSYNC_ACTIVE_LOW
+  #define CFG_LVDS_MISC_HSYNC_ACTIVE_LOW                 BLDCFG_LVDS_MISC_HSYNC_ACTIVE_LOW
+#else
+  #define CFG_LVDS_MISC_HSYNC_ACTIVE_LOW                 FALSE
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_BLON_ACTIVE_LOW
+  #define CFG_LVDS_MISC_BLON_ACTIVE_LOW                 BLDCFG_LVDS_MISC_BLON_ACTIVE_LOW
+#else
+  #define CFG_LVDS_MISC_BLON_ACTIVE_LOW                 FALSE
+#endif
+
+#ifdef BLDCFG_FORCE_MICROSERVER
+  #define CFG_FORCE_MICROSERVER                         BLDCFG_FORCE_MICROSERVER
+#else
+  #define CFG_FORCE_MICROSERVER                         FALSE
+#endif
+
+/*---------------------------------------------------------------------------
+ *       Processing the options:  Third, perform the option cross checks
+ *--------------------------------------------------------------------------*/
+// Assure that at least one type of memory support is included
+#if OPTION_UDIMMS == FALSE
+  #if OPTION_RDIMMS == FALSE
+    #if OPTION_SODIMMS == FALSE
+      #if OPTION_LRDIMMS == FALSE
+        #error  BLDOPT: No DIMM support selected. Either BLDOPT_REMOVE_UDIMMS_SUPPORT or BLDOPT_REMOVE_RDIMMS_SUPPORT or BLDOPT_REMOVE_SODIMMS_SUPPORT or BLDOPT_REMOVE_LRDIMMS_SUPPORT must be FALSE.
+      #endif
+    #endif
+  #endif
+#endif
+// Ensure at least one dimm type is capable
+#if CFG_MEMORY_RDIMM_CAPABLE == FALSE
+  #if CFG_MEMORY_UDIMM_CAPABLE == FALSE
+    #if CFG_MEMORY_SODIMM_CAPABLE == FALSE
+      #if CFG_MEMORY_LRDIMM_CAPABLE == FALSE
+        #error   BLDCFG: No dimm type is capable
+      #endif
+    #endif
+  #endif
+#endif
+// Check LRDIMM CODE and LRDIMM CFG item
+#if CFG_MEMORY_LRDIMM_CAPABLE == FALSE
+  #if  BLDOPT_REMOVE_LRDIMMS_SUPPORT == TRUE
+    #error   Warning: LRDIMM capability is false, but LRIDMM support code included
+  #endif
+#endif
+//  Turn off multi-socket based features if only one node...
+#if OPTION_MULTISOCKET == FALSE
+  #undef  OPTION_PARALLEL_TRAINING
+  #define OPTION_PARALLEL_TRAINING    FALSE
+  #undef  OPTION_NODE_INTERLEAVE
+  #define OPTION_NODE_INTERLEAVE      FALSE
+#endif
+// Ensure that at least one write leveling option is selected
+#if OPTION_DDR3 == TRUE
+  #if OPTION_HW_WRITE_LEV_TRAINING == FALSE
+    #if OPTION_SW_WRITE_LEV_TRAINING == FALSE
+      #error  No Write leveling option selected for DDR3
+    #endif
+  #endif
+  #if OPTION_SW_DRAM_INIT == FALSE
+    #error   Software dram init must be enabled for DDR3 dimms
+  #endif
+#endif
+// Ensure at least one DQS receiver training option is selected
+#if OPTION_HW_DQS_REC_EN_TRAINING == FALSE
+  #if OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == FALSE
+    #if OPTION_OPT_SW_DQS_REC_EN_TRAINING == FALSE
+      #error    No DQS receiver training option has been slected
+    #endif
+  #endif
+#endif
+// Ensure at least one Rd Wr position training option has been selected
+#if OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == FALSE
+  #if OPTION_OPT_SW_RD_WR_POS_TRAINING == FALSE
+    #error    No Rd Wr position training option has been selected
+  #endif
+#endif
+// Ensure at least one dram init option has been selected
+#if OPTION_HW_DRAM_INIT == FALSE
+  #if OPTION_SW_DRAM_INIT == FALSE
+    #error    No Dram init option has been selected
+  #endif
+#endif
+// Ensure the frequency limit is valid
+#if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR1866_FREQUENCY) && (CFG_MEMORY_BUS_FREQUENCY_LIMIT != 933)
+  #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR1600_FREQUENCY) && (CFG_MEMORY_BUS_FREQUENCY_LIMIT != 800)
+    #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR1333_FREQUENCY) && (CFG_MEMORY_BUS_FREQUENCY_LIMIT != 667)
+      #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR1066_FREQUENCY) && (CFG_MEMORY_BUS_FREQUENCY_LIMIT != 533)
+        #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR800_FREQUENCY) && (CFG_MEMORY_BUS_FREQUENCY_LIMIT != 400)
+          #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR667_FREQUENCY) && (CFG_MEMORY_BUS_FREQUENCY_LIMIT != 333)
+            #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR533_FREQUENCY) && (CFG_MEMORY_BUS_FREQUENCY_LIMIT != 266)
+              #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR400_FREQUENCY) && (CFG_MEMORY_BUS_FREQUENCY_LIMIT != 200)
+                #error    BLDCFG: Unsupported memory bus frequency
+              #endif
+            #endif
+          #endif
+        #endif
+      #endif
+    #endif
+  #endif
+#endif
+// Ensure timing mode is valid
+#if CFG_TIMING_MODE_SELECT != TIMING_MODE_SPECIFIC
+  #if CFG_TIMING_MODE_SELECT != TIMING_MODE_LIMITED
+    #if CFG_TIMING_MODE_SELECT != TIMING_MODE_AUTO
+      #error    BLDCFG: Invalid timing mode is set
+    #endif
+  #endif
+#endif
+// Ensure the scrub rate is valid
+#if ((CFG_SCRUB_DRAM_RATE > 0x16) && (CFG_SCRUB_DRAM_RATE != 0xFF))
+  #error    BLDCFG: Unsupported dram scrub rate set
+#endif
+#if CFG_SCRUB_L2_RATE > 0x16
+  #error   BLDCFG: Unsupported L2 scrubber rate set
+#endif
+#if CFG_SCRUB_L3_RATE > 0x16
+  #error   BLDCFG: unsupported L3 scrubber rate set
+#endif
+#if CFG_SCRUB_IC_RATE > 0x16
+  #error    BLDCFG: Unsupported Instruction cache scrub rate set
+#endif
+#if CFG_SCRUB_DC_RATE > 0x16
+  #error   BLDCFG: Unsupported Dcache scrub rate set
+#endif
+// Ensure Quad rank dimm type is valid
+#if CFG_MEMORY_QUADRANK_TYPE != QUADRANK_UNBUFFERED
+  #if CFG_MEMORY_QUADRANK_TYPE != QUADRANK_REGISTERED
+    #error     BLDCFG: Invalid quad rank dimm type set
+  #endif
+#endif
+// Ensure ECC symbol size is valid
+#if CFG_ECC_SYMBOL_SIZE != ECCSYMBOLSIZE_USE_BKDG
+  #if CFG_ECC_SYMBOL_SIZE != ECCSYMBOLSIZE_FORCE_X4
+    #if CFG_ECC_SYMBOL_SIZE != ECCSYMBOLSIZE_FORCE_X8
+      #error   BLDCFG: Invalid Ecc symbol size set
+    #endif
+  #endif
+#endif
+// Ensure power down mode is valid
+#if CFG_POWER_DOWN_MODE != POWER_DOWN_BY_CHIP_SELECT
+  #if CFG_POWER_DOWN_MODE != POWER_DOWN_BY_CHANNEL
+    #error     BLDCFG: Invalid power down mode set
+  #endif
+#endif
+
+/*****************************************************************************
+ *
+ * Process the option logic, setting local control variables
+ *
+ ****************************************************************************/
+#if OPTION_ACPI_PSTATES == TRUE
+  #define OPTFCN_ACPI_TABLES           CreateAcpiTablesMain
+  #define OPTFCN_GATHER_DATA           PStateGatherData
+  #if OPTION_MULTISOCKET == TRUE
+    #define OPTFCN_PSTATE_LEVELING     PStateLeveling
+  #else
+    #define OPTFCN_PSTATE_LEVELING     CommonReturnAgesaSuccess
+  #endif
+#else
+  #define OPTFCN_ACPI_TABLES           CommonReturnAgesaSuccess
+  #define OPTFCN_GATHER_DATA           CommonReturnAgesaSuccess
+  #define OPTFCN_PSTATE_LEVELING       CommonReturnAgesaSuccess
+#endif
+
+
+/*****************************************************************************
+ *
+ * Include the structure definitions for the defaults table structures
+ *
+ ****************************************************************************/
+#include  "Options.h"
+#include  "OptionCpuFamiliesInstall.h"
+#include  "OptionsHt.h"
+#include  "OptionHtInstall.h"
+#include  "OptionMemory.h"
+#include  "PlatformMemoryConfiguration.h"
+#include  "OptionMemoryInstall.h"
+#include  "OptionMemoryRecovery.h"
+#include  "OptionMemoryRecoveryInstall.h"
+#include  "OptionCpuFeaturesInstall.h"
+#include  "OptionDmi.h"
+#include  "OptionDmiInstall.h"
+#include  "OptionPstate.h"
+#include  "OptionPstateInstall.h"
+#include  "OptionWhea.h"
+#include  "OptionWheaInstall.h"
+#include  "OptionSrat.h"
+#include  "OptionSratInstall.h"
+#include  "OptionSlit.h"
+#include  "OptionSlitInstall.h"
+#include  "OptionMultiSocket.h"
+#include  "OptionMultiSocketInstall.h"
+#include  "OptionIdsInstall.h"
+#include  "OptionGfxRecovery.h"
+#include  "OptionGfxRecoveryInstall.h"
+#include  "OptionGnb.h"
+#include  "OptionGnbInstall.h"
+#include  "OptionS3ScriptInstall.h"
+#include  "OptionFchInstall.h"
+
+
+/*****************************************************************************
+ *
+ *  Generate the output structures (defaults tables)
+ *
+ ****************************************************************************/
+
+FCH_PLATFORM_POLICY  FchUserOptions = {
+  CFG_SMBUS0_BASE_ADDRESS,              // CfgSmbus0BaseAddress
+  CFG_SMBUS1_BASE_ADDRESS,              // CfgSmbus1BaseAddress
+  CFG_SIO_PME_BASE_ADDRESS,             // CfgSioPmeBaseAddress
+  CFG_ACPI_PM1_EVT_BLOCK_ADDRESS,       // CfgAcpiPm1EvtBlkAddr
+  CFG_ACPI_PM1_CNT_BLOCK_ADDRESS,       // CfgAcpiPm1CntBlkAddr
+  CFG_ACPI_PM_TMR_BLOCK_ADDRESS,        // CfgAcpiPmTmrBlkAddr
+  CFG_ACPI_CPU_CNT_BLOCK_ADDRESS,       // CfgCpuControlBlkAddr
+  CFG_ACPI_GPE0_BLOCK_ADDRESS,          // CfgAcpiGpe0BlkAddr
+  CFG_SMI_CMD_PORT_ADDRESS,             // CfgSmiCmdPortAddr
+  CFG_ACPI_PMA_CNTBLK_ADDRESS,          // CfgAcpiPmaCntBlkAddr
+  CFG_GEC_SHADOW_ROM_BASE,              // CfgGecShadowRomBase
+  CFG_WATCHDOG_TIMER_BASE,              // CfgWatchDogTimerBase
+  CFG_SPI_ROM_BASE_ADDRESS,             // CfgSpiRomBaseAddress
+  CFG_HPET_BASE_ADDRESS,                // CfgHpetBaseAddress
+  CFG_AZALIA_SSID,                      // CfgAzaliaSsid
+  CFG_SMBUS_SSID,                       // CfgSmbusSsid
+  CFG_IDE_SSID,                         // CfgIdeSsid
+  CFG_SATA_AHCI_SSID,                   // CfgSataAhciSsid
+  CFG_SATA_IDE_SSID,                    // CfgSataIdeSsid
+  CFG_SATA_RAID5_SSID,                  // CfgSataRaid5Ssid
+  CFG_SATA_RAID_SSID,                   // CfgSataRaidSsid
+  CFG_EHCI_SSID,                        // CfgEhcidSsid
+  CFG_OHCI_SSID,                        // CfgOhcidSsid
+  CFG_LPC_SSID,                         // CfgLpcSsid
+  CFG_SD_SSID,                          // CfgSdSsid
+  CFG_XHCI_SSID,                        // CfgXhciSsid
+  CFG_FCH_PORT80_BEHIND_PCIB,           // CfgFchPort80BehindPcib
+  CFG_FCH_ENABLE_ACPI_SLEEP_TRAP,       // CfgFchEnableAcpiSleepTrap
+  CFG_FCH_GPP_LINK_CONFIG,              // CfgFchGppLinkConfig
+  CFG_FCH_GPP_PORT0_PRESENT,            // CfgFchGppPort0Present
+  CFG_FCH_GPP_PORT1_PRESENT,            // CfgFchGppPort1Present
+  CFG_FCH_GPP_PORT2_PRESENT,            // CfgFchGppPort2Present
+  CFG_FCH_GPP_PORT3_PRESENT,            // CfgFchGppPort3Present
+  CFG_FCH_GPP_PORT0_HOTPLUG,            // CfgFchGppPort0HotPlug
+  CFG_FCH_GPP_PORT1_HOTPLUG,            // CfgFchGppPort1HotPlug
+  CFG_FCH_GPP_PORT2_HOTPLUG,            // CfgFchGppPort2HotPlug
+  CFG_FCH_GPP_PORT3_HOTPLUG,            // CfgFchGppPort3HotPlug
+
+  CFG_FCH_ESATA_PORT_BITMAP,            // CfgFchEsataPortBitMap
+  CFG_FCH_IR_PIN_CONTROL,               // CfgFchIrPinControl
+  CFG_FCH_SD_CLOCK_CONTROL,             // CfgFchSdClockControl
+  CFG_FCH_SCI_MAP_LIST,                 // *CfgFchSciMapControl
+  CFG_FCH_SATA_PHY_LIST,                // *CfgFchSataPhyControl
+  CFG_FCH_GPIO_CONTROL_LIST             // *CfgFchGpioControl
+};
+
+BUILD_OPT_CFG UserOptions = {
+  {                                             // AGESA version string
+    AGESA_CODE_SIGNATURE,                       //    code header Signature
+    AGESA_PACKAGE_STRING,                       //    8 character ID
+    AGESA_VERSION_STRING,                       //    12 character version string
+    0                                           //    null string terminator
+  },
+  //Build Option Area
+  OPTION_UDIMMS,                        //UDIMMS
+  OPTION_RDIMMS,                        //RDIMMS
+  OPTION_LRDIMMS,                       //LRDIMMS
+  OPTION_ECC,                           //ECC
+  OPTION_BANK_INTERLEAVE,               //BANK_INTERLEAVE
+  OPTION_DCT_INTERLEAVE,                //DCT_INTERLEAVE
+  OPTION_NODE_INTERLEAVE,               //NODE_INTERLEAVE
+  OPTION_PARALLEL_TRAINING,             //PARALLEL_TRAINING
+  OPTION_ONLINE_SPARE,                  //ONLINE_SPARE
+  OPTION_MEM_RESTORE,                   //MEM CONTEXT RESTORE
+  OPTION_MULTISOCKET,                   //MULTISOCKET
+  OPTION_ACPI_PSTATES,                  //ACPI_PSTATES
+  OPTION_CPU_PSTATE_HPC_MODE,           //High Preformace Computing (HPC) mode
+  OPTION_SRAT,                          //SRAT
+  OPTION_SLIT,                          //SLIT
+  OPTION_WHEA,                          //WHEA
+  OPTION_DMI,                           //DMI
+  OPTION_EARLY_SAMPLES,                 //EARLY_SAMPLES
+  OPTION_ADDR_TO_CS_TRANSLATOR,         //ADDR_TO_CS_TRANSLATOR
+
+  //Build Configuration Area
+  CFG_PCI_MMIO_BASE,
+  CFG_PCI_MMIO_SIZE,
+  {
+    // CoreVrm
+    {
+      CFG_VRM_CURRENT_LIMIT,              // VrmCurrentLimit
+      CFG_VRM_LOW_POWER_THRESHOLD,        // VrmLowPowerThershold
+      CFG_VRM_SLEW_RATE,                  // VrmSlewRate
+      CFG_VRM_ADDITIONAL_DELAY,           // VrmAdditionalDelay
+      CFG_VRM_HIGH_SPEED_ENABLE,          // VrmHiSpeedEnable
+      CFG_VRM_INRUSH_CURRENT_LIMIT        // VrmInrushCurrentLimit
+    },
+    // NbVrm
+    {
+      CFG_VRM_NB_CURRENT_LIMIT,           // VrmNbCurrentLimit
+      CFG_VRM_NB_LOW_POWER_THRESHOLD,     // VrmNbLowPowerThershold
+      CFG_VRM_NB_SLEW_RATE,               // VrmNbSlewRate
+      CFG_VRM_NB_ADDITIONAL_DELAY,        // VrmNbAdditionalDelay
+      CFG_VRM_NB_HIGH_SPEED_ENABLE,       // VrmNbHiSpeedEnable
+      CFG_VRM_NB_INRUSH_CURRENT_LIMIT     // VrmNbInrushCurrentLimit
+    }
+  },
+  CFG_PLAT_NUM_IO_APICS,                //PlatformApicIoNumber
+  CFG_MEM_INIT_PSTATE,                  //MemoryInitPstate
+  CFG_C1E_MODE,                         //C1eMode
+  CFG_C1E_OPDATA,                       //C1ePlatformData
+  CFG_C1E_OPDATA1,                      //C1ePlatformData1
+  CFG_C1E_OPDATA2,                      //C1ePlatformData2
+  CFG_C1E_OPDATA3,                      //C1ePlatformData3
+  CFG_CSTATE_MODE,                      //CStateMode
+  CFG_CSTATE_OPDATA,                    //CStatePlatformData
+  CFG_CSTATE_IO_BASE_ADDRESS,           //CStateIoBaseAddress
+  CFG_CPB_MODE,                         //CpbMode
+  LOW_POWER_PSTATE_FOR_PROCHOT_AUTO,    //Low power Pstate for PROCHOT, it's always set to 'AUTO'
+  CFG_CORE_LEVELING_MODE,               //CoreLevelingCofig
+  {
+    CFG_PLATFORM_CONTROL_FLOW_MODE,       // The platform's control flow mode.
+    CFG_USE_HT_ASSIST,                    // CfgUseHtAssist
+    CFG_USE_ATM_MODE,                     // CfgUseAtmMode
+    CFG_USE_32_BYTE_REFRESH,              // Display Refresh uses 32 byte packets.
+    CFG_USE_VARIABLE_MCT_ISOC_PRIORITY,   // The Memory controller will be set to Variable Isoc Priority.
+    // ADVANCED_PERFORMANCE_PROFILE
+    {
+      CFG_PERFORMANCE_HARDWARE_PREFETCHER,  // Hardware prefetcher mode
+      CFG_PERFORMANCE_SOFTWARE_PREFETCHES,  // Software prefetcher mode
+      CFG_PERFORMANCE_DRAM_PREFETCHER       // Dram prefetcher mode
+    },
+    CFG_PLATFORM_POWER_POLICY_MODE        // The platform's power policy mode.
+  },
+  (CPU_HT_DEEMPHASIS_LEVEL *)CFG_PLATFORM_DEEMPHASIS_LIST,         // Deemphasis settings
+  CFG_AMD_PLATFORM_TYPE,                //AmdPlatformType
+  CFG_AMD_PSTATE_CAP_VALUE,             // Amd pstate ceiling enabling deck
+
+  CFG_MEMORY_BUS_FREQUENCY_LIMIT,       // CfgMemoryBusFrequencyLimit
+  CFG_MEMORY_MODE_UNGANGED,             // CfgMemoryModeUnganged
+  CFG_MEMORY_QUAD_RANK_CAPABLE,         // CfgMemoryQuadRankCapable
+  CFG_MEMORY_QUADRANK_TYPE,             // CfgMemoryQuadrankType
+  CFG_MEMORY_RDIMM_CAPABLE,             // CfgMemoryRDimmCapable
+  CFG_MEMORY_LRDIMM_CAPABLE,            // CfgMemoryLRDimmCapable
+  CFG_MEMORY_UDIMM_CAPABLE,             // CfgMemoryUDimmCapable
+  CFG_MEMORY_SODIMM_CAPABLE,            // CfgMemorySodimmCapable
+  CFG_LIMIT_MEMORY_TO_BELOW_1TB,        // CfgLimitMemoryToBelow1Tb
+  CFG_MEMORY_ENABLE_BANK_INTERLEAVING,  // CfgMemoryEnableBankInterleaving
+  CFG_MEMORY_ENABLE_NODE_INTERLEAVING,  // CfgMemoryEnableNodeInterleaving
+  CFG_MEMORY_CHANNEL_INTERLEAVING,      // CfgMemoryChannelInterleaving
+  CFG_MEMORY_POWER_DOWN,                // CfgMemoryPowerDown
+  CFG_POWER_DOWN_MODE,                  // CfgPowerDownMode
+  CFG_ONLINE_SPARE,                     // CfgOnlineSpare
+  CFG_MEMORY_PARITY_ENABLE,             // CfgMemoryParityEnable
+  CFG_BANK_SWIZZLE,                     // CfgBankSwizzle
+  CFG_TIMING_MODE_SELECT,               // CfgTimingModeSelect
+  CFG_MEMORY_CLOCK_SELECT,              // CfgMemoryClockSelect
+  CFG_DQS_TRAINING_CONTROL,             // CfgDqsTrainingControl
+  CFG_IGNORE_SPD_CHECKSUM,              // CfgIgnoreSpdChecksum
+  CFG_USE_BURST_MODE,                   // CfgUseBurstMode
+  CFG_MEMORY_ALL_CLOCKS_ON,             // CfgMemoryAllClocksOn
+  CFG_ENABLE_ECC_FEATURE,               // CfgEnableEccFeature
+  CFG_ECC_REDIRECTION,                  // CfgEccRedirection
+  CFG_SCRUB_DRAM_RATE,                  // CfgScrubDramRate
+  CFG_SCRUB_L2_RATE,                    // CfgScrubL2Rate
+  CFG_SCRUB_L3_RATE,                    // CfgScrubL3Rate
+  CFG_SCRUB_IC_RATE,                    // CfgScrubIcRate
+  CFG_SCRUB_DC_RATE,                    // CfgScrubDcRate
+  CFG_ECC_SYNC_FLOOD,                   // CfgEccSyncFlood
+  CFG_ECC_SYMBOL_SIZE,                  // CfgEccSymbolSize
+  CFG_HEAP_DRAM_ADDRESS,                // CfgHeapDramAddress
+  CFG_1GB_ALIGN,                        // CfgNodeMem1GBAlign
+  CFG_S3_LATE_RESTORE,                  // CfgS3LateRestore
+  CFG_ACPI_PSTATE_PSD_INDPX,            // CfgAcpiPstateIndependent
+  (AP_MTRR_SETTINGS *) CFG_AP_MTRR_SETTINGS_LIST, // CfgApMtrrSettingsList
+  CFG_UMA_MODE,                         // CfgUmaMode
+  CFG_UMA_SIZE,                         // CfgUmaSize
+  CFG_UMA_ABOVE4G,                      // CfgUmaAbove4G
+  CFG_UMA_ALIGNMENT,                    // CfgUmaAlignment
+  CFG_PROCESSOR_SCOPE_IN_SB,            // CfgProcessorScopeInSb
+  CFG_PROCESSOR_SCOPE_NAME0,            // CfgProcessorScopeName0
+  CFG_PROCESSOR_SCOPE_NAME1,            // CfgProcessorScopeName1
+  CFG_GNB_HD_AUDIO,                     // CfgGnbHdAudio
+  CFG_ABM_SUPPORT,                      // CfgAbmSupport
+  CFG_DYNAMIC_REFRESH_RATE,             // CfgDynamicRefreshRate
+  CFG_LCD_BACK_LIGHT_CONTROL,           // CfgLcdBackLightControl
+  CFG_GNB_STEREO_3D_PINOUT,             // CfgGnb3dStereoPinIndex
+  CFG_TEMP_PCIE_MMIO_BASE_ADDRESS,      // CfgTempPcieMmioBaseAddress
+  CFG_GNB_IGPU_SSID,                    // CfgGnbIGPUSSID
+  CFG_GNB_HDAUDIO_SSID,                 // CfgGnbHDAudioSSID
+  CFG_GNB_PCIE_SSID,                    // CfgGnbPcieSSID
+  CFG_GFX_LVDS_SPREAD_SPECTRUM,         // CfgLvdsSpreadSpectrum
+  CFG_GFX_LVDS_SPREAD_SPECTRUM_RATE,    // CfgLvdsSpreadSpectrumRate
+
+  &FchUserOptions,                      // FchBldCfg
+
+  CFG_IOMMU_SUPPORT,                    // CfgIommuSupport
+  CFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE,    // CfgLvdsPowerOnSeqDigonToDe
+  CFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL,  // CfgLvdsPowerOnSeqDeToVaryBl
+  CFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON,    // CfgLvdsPowerOnSeqDeToDigon
+  CFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE, // CfgLvdsPowerOnSeqVaryBlToDe
+  CFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY,// CfgLvdsPowerOnSeqOnToOffDelay
+  CFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON,// CfgLvdsPowerOnSeqVaryBlToBlon
+  CFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL,// CfgLvdsPowerOnSeqBlonToVaryBl
+  CFG_LVDS_MAX_PIXEL_CLOCK_FREQ,        // CfgLvdsMaxPixelClockFreq
+  CFG_LCD_BIT_DEPTH_CONTROL_VALUE,      // CfgLcdBitDepthControlValue
+  CFG_LVDS_24BBP_PANEL_MODE,            // CfgLvds24bbpPanelMode
+  {{
+    CFG_LVDS_MISC_888_FPDI_MODE,          // CfgLvdsMiscControl
+    CFG_LVDS_MISC_DL_CH_SWAP,             // CfgLvdsMiscControl
+    CFG_LVDS_MISC_VSYNC_ACTIVE_LOW,       // CfgLvdsMiscControl
+    CFG_LVDS_MISC_HSYNC_ACTIVE_LOW,       // CfgLvdsMiscControl
+    CFG_LVDS_MISC_BLON_ACTIVE_LOW,        // CfgLvdsMiscControl
+  }},
+  CFG_PCIE_REFCLK_SPREAD_SPECTRUM,      // CfgPcieRefClkSpreadSpectrum
+  CFG_ENABLE_EXTERNAL_VREF,             // CfgExternalVrefCtlFeature
+  CFG_FORCE_TRAIN_MODE,                 // CfgForceTrainMode
+  CFG_GNB_REMOTE_DISPLAY_SUPPORT,       // CfgGnbRemoteDisplaySupport
+  (IOMMU_EXCLUSION_RANGE_DESCRIPTOR *) CFG_IOMMU_EXCLUSION_RANGE_LIST, // CfgIvrsExclusionRangeList
+  0,                                    //reserved...
+};
+
+CONST FUNCTION_PARAMS_INFO ROMDATA FuncParamsInfo[] =
+{
+  #if AGESA_ENTRY_INIT_RESET == TRUE
+    { AMD_INIT_RESET,
+      sizeof (AMD_RESET_PARAMS),
+      (PF_AGESA_FUNCTION) AmdInitResetConstructor,
+      (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+      AMD_INIT_RESET_HANDLE
+    },
+  #endif
+
+  #if AGESA_ENTRY_INIT_RECOVERY == TRUE
+    { AMD_INIT_RECOVERY,
+      sizeof (AMD_RECOVERY_PARAMS),
+      (PF_AGESA_FUNCTION) AmdInitRecoveryInitializer,
+      (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+      AMD_INIT_POST_HANDLE
+    },
+  #endif
+
+  #if AGESA_ENTRY_INIT_EARLY == TRUE
+    { AMD_INIT_EARLY,
+      sizeof (AMD_EARLY_PARAMS),
+      (PF_AGESA_FUNCTION) AmdInitEarlyInitializer,
+      (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+      AMD_INIT_EARLY_HANDLE
+    },
+  #endif
+
+  #if AGESA_ENTRY_INIT_ENV == TRUE
+    { AMD_INIT_ENV,
+      sizeof (AMD_ENV_PARAMS),
+      (PF_AGESA_FUNCTION) AmdInitEnvInitializer,
+      (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+      AMD_INIT_ENV_HANDLE
+    },
+  #endif
+
+  #if AGESA_ENTRY_INIT_LATE == TRUE
+    { AMD_INIT_LATE,
+      sizeof (AMD_LATE_PARAMS),
+      (PF_AGESA_FUNCTION) AmdInitLateInitializer,
+      (PF_AGESA_DESTRUCTOR) AmdInitLateDestructor,
+      AMD_INIT_LATE_HANDLE
+    },
+  #endif
+
+  #if AGESA_ENTRY_INIT_MID == TRUE
+    { AMD_INIT_MID,
+      sizeof (AMD_MID_PARAMS),
+      (PF_AGESA_FUNCTION) AmdInitMidInitializer,
+      (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+      AMD_INIT_MID_HANDLE
+    },
+  #endif
+
+  #if AGESA_ENTRY_INIT_POST == TRUE
+    { AMD_INIT_POST,
+      sizeof (AMD_POST_PARAMS),
+      (PF_AGESA_FUNCTION) AmdInitPostInitializer,
+      (PF_AGESA_DESTRUCTOR) AmdInitPostDestructor,
+      AMD_INIT_POST_HANDLE
+    },
+  #endif
+
+  #if AGESA_ENTRY_INIT_RESUME == TRUE
+    { AMD_INIT_RESUME,
+      sizeof (AMD_RESUME_PARAMS),
+      (PF_AGESA_FUNCTION) AmdInitResumeInitializer,
+      (PF_AGESA_DESTRUCTOR) AmdInitResumeDestructor,
+      AMD_INIT_RESUME_HANDLE
+    },
+  #endif
+
+  #if AGESA_ENTRY_INIT_LATE_RESTORE == TRUE
+    { AMD_S3LATE_RESTORE,
+      sizeof (AMD_S3LATE_PARAMS),
+      (PF_AGESA_FUNCTION) AmdS3LateRestoreInitializer,
+      (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+      AMD_S3_LATE_RESTORE_HANDLE
+    },
+  #endif
+
+  #if AGESA_ENTRY_INIT_S3SAVE == TRUE
+    { AMD_S3_SAVE,
+      sizeof (AMD_S3SAVE_PARAMS),
+      (PF_AGESA_FUNCTION) AmdS3SaveInitializer,
+      (PF_AGESA_DESTRUCTOR) AmdS3SaveDestructor,
+      AMD_S3_SAVE_HANDLE
+    },
+  #endif
+
+  #if AGESA_ENTRY_LATE_RUN_AP_TASK == TRUE
+    { AMD_LATE_RUN_AP_TASK,
+      sizeof (AP_EXE_PARAMS),
+      (PF_AGESA_FUNCTION) AmdLateRunApTaskInitializer,
+      (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+      AMD_LATE_RUN_AP_TASK_HANDLE
+    },
+  #endif
+  { 0, 0, NULL, NULL, 0 }
+};
+
+CONST UINTN InitializerCount = ((sizeof (FuncParamsInfo)) / (sizeof (FuncParamsInfo[0])));
+
+CONST DISPATCH_TABLE ROMDATA DispatchTable[] =
+{
+  { AMD_CREATE_STRUCT, (IMAGE_ENTRY)AmdCreateStruct },
+  { AMD_RELEASE_STRUCT, (IMAGE_ENTRY)AmdReleaseStruct },
+
+  #if AGESA_ENTRY_INIT_RESET == TRUE
+    { AMD_INIT_RESET, (IMAGE_ENTRY)AmdInitReset },
+  #endif
+
+  #if AGESA_ENTRY_INIT_RECOVERY == TRUE
+    { AMD_INIT_RECOVERY, (IMAGE_ENTRY)AmdInitRecovery },
+  #endif
+
+  #if AGESA_ENTRY_INIT_EARLY == TRUE
+    { AMD_INIT_EARLY, (IMAGE_ENTRY)AmdInitEarly },
+  #endif
+
+  #if AGESA_ENTRY_INIT_POST == TRUE
+    { AMD_INIT_POST, (IMAGE_ENTRY)AmdInitPost },
+  #endif
+
+  #if AGESA_ENTRY_INIT_ENV == TRUE
+    { AMD_INIT_ENV, (IMAGE_ENTRY)AmdInitEnv },
+  #endif
+
+  #if AGESA_ENTRY_INIT_MID == TRUE
+    { AMD_INIT_MID, (IMAGE_ENTRY)AmdInitMid },
+  #endif
+
+  #if AGESA_ENTRY_INIT_LATE == TRUE
+    { AMD_INIT_LATE, (IMAGE_ENTRY)AmdInitLate },
+  #endif
+
+  #if AGESA_ENTRY_INIT_S3SAVE == TRUE
+    { AMD_S3_SAVE, (IMAGE_ENTRY)AmdS3Save },
+  #endif
+
+  #if AGESA_ENTRY_INIT_RESUME == TRUE
+    { AMD_INIT_RESUME, (IMAGE_ENTRY)AmdInitResume },
+  #endif
+
+  #if AGESA_ENTRY_INIT_LATE_RESTORE == TRUE
+    { AMD_S3LATE_RESTORE, (IMAGE_ENTRY)AmdS3LateRestore },
+  #endif
+
+  #if AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE
+    { AMD_GET_APIC_ID, (IMAGE_ENTRY)AmdGetApicId },
+    { AMD_GET_PCI_ADDRESS, (IMAGE_ENTRY)AmdGetPciAddress },
+    { AMD_IDENTIFY_CORE, (IMAGE_ENTRY)AmdIdentifyCore },
+    { AMD_READ_EVENT_LOG, (IMAGE_ENTRY)AmdReadEventLog },
+    { AMD_IDENTIFY_DIMMS, (IMAGE_ENTRY)AmdIdentifyDimm },
+    { AMD_GET_EXECACHE_SIZE, (IMAGE_ENTRY)AmdGetAvailableExeCacheSize },
+  #endif
+
+  #if AGESA_ENTRY_LATE_RUN_AP_TASK == TRUE
+    { AMD_LATE_RUN_AP_TASK, (IMAGE_ENTRY)AmdLateRunApTask },
+  #endif
+  { 0, NULL }
+};
+
+CONST DISPATCH_TABLE ROMDATA ApDispatchTable[] =
+{
+  IDS_LATE_RUN_AP_TASK
+  // Get DMI info
+  CPU_DMI_AP_GET_TYPE4_TYPE7
+  // Probe filter enable
+  L3_FEAT_AP_DISABLE_CACHE
+  L3_FEAT_AP_ENABLE_CACHE
+  // Cpu Late Init
+  CPU_LATE_INIT_AP_TASK
+  { 0, NULL }
+};
+
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+  #if IDSOPT_IDS_ENABLED == TRUE
+    #if IDSOPT_TRACING_ENABLED == TRUE
+      #define MAKE_DBG_STR(x, y)  MAKE_AS_A_STRING(x : y)
+      CONST CHAR8 *BldOptDebugOutput[] = {
+        #if IDS_TRACE_SHOW_BLD_OPT_CFG == TRUE
+          //Build Option Area
+          MAKE_DBG_STR (\nOptUDIMM,             OPTION_UDIMMS)
+          MAKE_DBG_STR (\nOptRDIMM,             OPTION_RDIMMS)
+          MAKE_DBG_STR (\nOptLRDIMM,            OPTION_LRDIMMS)
+          MAKE_DBG_STR (\nOptECC,               OPTION_ECC)
+          MAKE_DBG_STR (\nOptCsIntlv,           OPTION_BANK_INTERLEAVE)
+          MAKE_DBG_STR (\nOptDctIntlv,          OPTION_DCT_INTERLEAVE)
+          MAKE_DBG_STR (\nOptNodeIntlv,         OPTION_NODE_INTERLEAVE)
+          //MAKE_DBG_STR (\nOptParallelTraining,  OPTION_PARALLEL_TRAINING)
+          MAKE_DBG_STR (\nOptOnlineSpare,       OPTION_ONLINE_SPARE)
+          MAKE_DBG_STR (\nOptAddr2CsTranslator, OPTION_ADDR_TO_CS_TRANSLATOR)
+          MAKE_DBG_STR (\nOptMemRestore,        OPTION_MEM_RESTORE)
+          MAKE_DBG_STR (\nOptMultiSocket,       OPTION_MULTISOCKET)
+          MAKE_DBG_STR (\nOptPstates,           OPTION_ACPI_PSTATES)
+          MAKE_DBG_STR (\nOptSRAT,              OPTION_SRAT)
+          MAKE_DBG_STR (\nOptSLIT,              OPTION_SLIT)
+          MAKE_DBG_STR (\nOptWHEA,              OPTION_WHEA)
+          MAKE_DBG_STR (\nOptDMI,               OPTION_DMI)
+          MAKE_DBG_STR (\nOptEarlySamples,      OPTION_EARLY_SAMPLES),
+
+          //Build Configuration Area
+          // CoreVrm
+          MAKE_DBG_STR (\nVrmCurrentLimit      , CFG_VRM_CURRENT_LIMIT)
+          MAKE_DBG_STR (\nVrmLowPowerThreshold , CFG_VRM_LOW_POWER_THRESHOLD)
+          MAKE_DBG_STR (\nVrmSlewRate          , CFG_VRM_SLEW_RATE)
+          MAKE_DBG_STR (\nVrmAdditionalDelay   , CFG_VRM_ADDITIONAL_DELAY)
+          MAKE_DBG_STR (\nVrmHiSpeedEnable     , CFG_VRM_HIGH_SPEED_ENABLE)
+          MAKE_DBG_STR (\nVrmInrushCurrentLimit, CFG_VRM_INRUSH_CURRENT_LIMIT)
+          // NbVrm
+          MAKE_DBG_STR (\nNbVrmCurrentLimit      , CFG_VRM_NB_CURRENT_LIMIT)
+          MAKE_DBG_STR (\nNbVrmLowPowerThreshold , CFG_VRM_NB_LOW_POWER_THRESHOLD)
+          MAKE_DBG_STR (\nNbVrmSlewRate          , CFG_VRM_NB_SLEW_RATE)
+          MAKE_DBG_STR (\nNbVrmAdditionalDelay   , CFG_VRM_NB_ADDITIONAL_DELAY)
+          MAKE_DBG_STR (\nNbVrmHiSpeedEnable     , CFG_VRM_NB_HIGH_SPEED_ENABLE)
+          MAKE_DBG_STR (\nNbVrmInrushCurrentLimit, CFG_VRM_NB_INRUSH_CURRENT_LIMIT),
+
+          MAKE_DBG_STR (\nNumIoApics            , CFG_PLAT_NUM_IO_APICS)
+          MAKE_DBG_STR (\nMemInitPstate         , CFG_MEM_INIT_PSTATE)
+          MAKE_DBG_STR (\nC1eMode               , CFG_C1E_MODE)
+          MAKE_DBG_STR (\nC1eOpData             , CFG_C1E_OPDATA)
+          MAKE_DBG_STR (\nC1eOpdata1            , CFG_C1E_OPDATA1)
+          MAKE_DBG_STR (\nC1eOpdata2            , CFG_C1E_OPDATA2)
+          MAKE_DBG_STR (\nC1eOpdata3            , CFG_C1E_OPDATA3)
+          MAKE_DBG_STR (\nCStateMode            , CFG_CSTATE_MODE)
+          MAKE_DBG_STR (\nCStateOpData          , CFG_CSTATE_OPDATA)
+          MAKE_DBG_STR (\nCStateIoBaseAddr      , CFG_CSTATE_IO_BASE_ADDRESS)
+          MAKE_DBG_STR (\nCpbMode               , CFG_CPB_MODE)
+          MAKE_DBG_STR (\nCoreLevelingMode      , CFG_CORE_LEVELING_MODE),
+
+          MAKE_DBG_STR (\nControlFlowMode       , CFG_PLATFORM_CONTROL_FLOW_MODE)
+          MAKE_DBG_STR (\nUseHtAssist           , CFG_USE_HT_ASSIST)
+          MAKE_DBG_STR (\nUseAtmMode            , CFG_USE_ATM_MODE)
+          MAKE_DBG_STR (\nUse32ByteRefresh      , CFG_USE_32_BYTE_REFRESH)
+          MAKE_DBG_STR (\nUseVarMctIsocPriority , CFG_USE_VARIABLE_MCT_ISOC_PRIORITY)
+          MAKE_DBG_STR (\nPowerPolicy           , CFG_PLATFORM_POWER_POLICY_MOD)
+
+          MAKE_DBG_STR (\nDeemphasisList        , CFG_PLATFORM_DEEMPHASIS_LIST)
+
+          MAKE_DBG_STR (\nPciMmioAddr           , CFG_PCI_MMIO_BASE)
+          MAKE_DBG_STR (\nPciMmioSize           , CFG_PCI_MMIO_SIZE)
+          MAKE_DBG_STR (\nPlatformType          , CFG_AMD_PLATFORM_TYPE)
+          MAKE_DBG_STR (\nPstateCapValue        , CFG_AMD_PSTATE_CAP_VALUE),
+
+          MAKE_DBG_STR (\nMemBusFreqLimit       , CFG_MEMORY_BUS_FREQUENCY_LIMIT)
+          MAKE_DBG_STR (\nTimingModeSelect      , CFG_TIMING_MODE_SELECT)
+          MAKE_DBG_STR (\nMemoryClockSelect     , CFG_MEMORY_CLOCK_SELECT)
+
+          MAKE_DBG_STR (\nMemUnganged           , CFG_MEMORY_MODE_UNGANGED)
+          MAKE_DBG_STR (\nQRCap                 , CFG_MEMORY_QUAD_RANK_CAPABLE)
+          MAKE_DBG_STR (\nQRType                , CFG_MEMORY_QUADRANK_TYPE)
+          MAKE_DBG_STR (\nRDimmCap              , CFG_MEMORY_RDIMM_CAPABLE)
+          MAKE_DBG_STR (\nLRDimmCap             , CFG_MEMORY_LRDIMM_CAPABLE)
+          MAKE_DBG_STR (\nUDimmCap              , CFG_MEMORY_UDIMM_CAPABLE)
+          MAKE_DBG_STR (\nSODimmCap             , CFG_MEMORY_SODIMM_CAPABLE)
+          MAKE_DBG_STR (\nDqsTrainingControl    , CFG_DQS_TRAINING_CONTROL)
+          MAKE_DBG_STR (\nIgnoreSpdChecksum     , CFG_IGNORE_SPD_CHECKSUM)
+          MAKE_DBG_STR (\nUseBurstMode          , CFG_USE_BURST_MODE)
+          MAKE_DBG_STR (\nAllMemClkOn           , CFG_MEMORY_ALL_CLOCKS_ON),
+
+          MAKE_DBG_STR (\nPowerDownEn           , CFG_MEMORY_POWER_DOWN)
+          MAKE_DBG_STR (\nPowerDownMode         , CFG_POWER_DOWN_MODE)
+          MAKE_DBG_STR (\nOnlineSpare           , CFG_ONLINE_SPARE)
+          MAKE_DBG_STR (\nAddrParityEn          , CFG_MEMORY_PARITY_ENABLE)
+          MAKE_DBG_STR (\nBankSwizzle           , CFG_BANK_SWIZZLE)
+          MAKE_DBG_STR (\nLimitBelow1TB         , CFG_LIMIT_MEMORY_TO_BELOW_1TB)
+          MAKE_DBG_STR (\nCsIntlvEn             , CFG_MEMORY_ENABLE_BANK_INTERLEAVING)
+          MAKE_DBG_STR (\nNodeIntlvEn           , CFG_MEMORY_ENABLE_NODE_INTERLEAVING)
+          MAKE_DBG_STR (\nDctIntlvEn            , CFG_MEMORY_CHANNEL_INTERLEAVING),
+
+          MAKE_DBG_STR (\nUmaMode                , CFG_UMA_MODE)
+          MAKE_DBG_STR (\nUmaSize                , CFG_UMA_SIZE)
+          MAKE_DBG_STR (\nUmaAbove4G             , CFG_UMA_ABOVE4G)
+          MAKE_DBG_STR (\nUmaAlignment           , CFG_UMA_ALIGNMENT)
+
+          MAKE_DBG_STR (\nEccEn                 , CFG_ENABLE_ECC_FEATURE)
+          MAKE_DBG_STR (\nEccRedirect           , CFG_ECC_REDIRECTION)
+          MAKE_DBG_STR (\nScrubDramRate         , CFG_SCRUB_DRAM_RATE)
+          MAKE_DBG_STR (\nScrubL2Rate           , CFG_SCRUB_L2_RATE)
+          MAKE_DBG_STR (\nScrubL3Rate           , CFG_SCRUB_L3_RATE)
+          MAKE_DBG_STR (\nScrubIcRate           , CFG_SCRUB_IC_RATE)
+          MAKE_DBG_STR (\nScrubDcRate           , CFG_SCRUB_DC_RATE)
+          MAKE_DBG_STR (\nEccSyncFlood          , CFG_ECC_SYNC_FLOOD)
+          MAKE_DBG_STR (\nEccSymbolSize         , CFG_ECC_SYMBOL_SIZE)
+          MAKE_DBG_STR (\nHeapDramAddress       , CFG_HEAP_DRAM_ADDRESS)
+          MAKE_DBG_STR (\nNodeMem1GBAlign       , CFG_1GB_ALIGN),
+
+          MAKE_DBG_STR (\nS3LateRestore         , CFG_S3_LATE_RESTORE)
+          MAKE_DBG_STR (\nAcpiPstateIndependent , CFG_ACPI_PSTATE_PSD_INDPX)
+
+          MAKE_DBG_STR (\nApMtrrSettingsList     , CFG_AP_MTRR_SETTINGS_LIST)
+
+          MAKE_DBG_STR (\nProcessorScopeInSb     , CFG_PROCESSOR_SCOPE_IN_SB)
+          MAKE_DBG_STR (\nProcessorScopeName0    , CFG_PROCESSOR_SCOPE_NAME0)
+          MAKE_DBG_STR (\nProcessorScopeName1    , CFG_PROCESSOR_SCOPE_NAME1)
+          MAKE_DBG_STR (\nGnbHdAudio             , CFG_GNB_HD_AUDIO)
+          MAKE_DBG_STR (\nAbmSupport             , CFG_ABM_SUPPORT)
+          MAKE_DBG_STR (\nDynamicRefreshRate     , CFG_DYNAMIC_REFRESH_RATE)
+          MAKE_DBG_STR (\nLcdBackLightControl    , CFG_LCD_BACK_LIGHT_CONTROL)
+          MAKE_DBG_STR (\nGnb3dStereoPinIndex    , CFG_GNB_STEREO_3D_PINOUT)
+          MAKE_DBG_STR (\nTempPcieMmioBaseAddress, CFG_TEMP_PCIE_MMIO_BASE_ADDRESS),
+          MAKE_DBG_STR (\nCfgGnbIGPUSSID         , CFG_GNB_IGPU_SSID)
+          MAKE_DBG_STR (\nCfgGnbHDAudioSSID      , CFG_GNB_HDAUDIO_SSID)
+          MAKE_DBG_STR (\nCfgGnbPcieSSID         , CFG_GNB_PCIE_SSID)
+          MAKE_DBG_STR (\nCfgIommuSupport        , CFG_IOMMU_SUPPORT)
+          MAKE_DBG_STR (\nCfgLvdsSpreadSpectrum  , CFG_GFX_LVDS_SPREAD_SPECTRUM)
+          MAKE_DBG_STR (\nCfgLvdsSpreadSpectrumRate , CFG_GFX_LVDS_SPREAD_SPECTRUM_RATE)
+          MAKE_DBG_STR (\nCfgLvdsPowerOnSeqDigonToDe    , CFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE)
+          MAKE_DBG_STR (\nCfgLvdsPowerOnSeqDeToVaryBl   , CFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL)
+          MAKE_DBG_STR (\nCfgLvdsPowerOnSeqDeToDigon    , CFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON)
+          MAKE_DBG_STR (\nCfgLvdsPowerOnSeqVaryBlToDe   , CFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE)
+          MAKE_DBG_STR (\nCfgLvdsPowerOnSeqOnToOffDelay , CFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY)
+          MAKE_DBG_STR (\nCfgLvdsPowerOnSeqVaryBlToBlon , CFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON)
+          MAKE_DBG_STR (\nCfgLvdsPowerOnSeqBlonToVaryBl , CFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL)
+          MAKE_DBG_STR (\nCfgLvdsMaxPixelClockFreq      , CFG_LVDS_MAX_PIXEL_CLOCK_FREQ)
+          MAKE_DBG_STR (\nCfgLcdBitDepthControlValue    , CFG_LCD_BIT_DEPTH_CONTROL_VALUE)
+          MAKE_DBG_STR (\nCfgLvds24bbpPanelMode         , CFG_LVDS_24BBP_PANEL_MODE),
+          MAKE_DBG_STR (\nCfgLvdsMiscControl.FpdiMode   , CFG_LVDS_MISC_888_FPDI_MODE),
+          MAKE_DBG_STR (\nCfgLvdsMiscControl.DlChSwap           , CFG_LVDS_MISC_DL_CH_SWAP),
+          MAKE_DBG_STR (\nCfgLvdsMiscControl.VsyncActiveLow     , CFG_LVDS_MISC_VSYNC_ACTIVE_LOW),
+          MAKE_DBG_STR (\nCfgLvdsMiscControl.HsyncActiveLow     , CFG_LVDS_MISC_HSYNC_ACTIVE_LOW),
+          MAKE_DBG_STR (\nCfgLvdsMiscControl.BLONActiveLow      , CFG_LVDS_MISC_BLON_ACTIVE_LOW),
+          MAKE_DBG_STR (\nCfgPcieRefClkSpreadSpectrum   , CFG_PCIE_REFCLK_SPREAD_SPECTRUM),
+          MAKE_DBG_STR (\nCfgExtVref                    , CFG_ENABLE_EXTERNAL_VREF),
+          MAKE_DBG_STR (\nCfgForceTrainMode             , CFG_FORCE_TRAIN_MODE),
+          MAKE_DBG_STR (\nCfgGnbRemoteDisplaySupport    , CFG_GNB_REMOTE_DISPLAY_CONFIG),
+          MAKE_DBG_STR (\nCfgIvrsExclusionRangeList     , CFG_IOMMU_EXCLUSION_RANGE_LIST),
+        #endif
+        NULL
+      };
+    #endif
+  #endif
+#endif
diff --git a/src/vendorcode/amd/agesa/f15/Include/PlatformMemoryConfiguration.h b/src/vendorcode/amd/agesa/f15/Include/PlatformMemoryConfiguration.h
new file mode 100644
index 0000000000..402b1cf3e1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/PlatformMemoryConfiguration.h
@@ -0,0 +1,499 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Platform Specific Memory Configuration
+ *
+ * Contains Definitions and Macros for control of AGESA Memory code on a per platform basis
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  OPTION
+ * @e \$Revision: 52513 $   @e \$Date: 2011-05-08 21:50:58 -0600 (Sun, 08 May 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _PLATFORM_MEMORY_CONFIGURATION_H_
+#define _PLATFORM_MEMORY_CONFIGURATION_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+#ifndef PSO_ENTRY
+  #define PSO_ENTRY UINT8
+#endif
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------
+ *                 PLATFORM SPECIFIC MEMORY DEFINITIONS
+ *----------------------------------------------------------------------------------------
+ */
+///
+///  Memory Speed and DIMM Population Masks
+///
+///<  DDR Speed Masks
+///<    Specifies the DDR Speed on a memory channel
+///
+#define ANY_SPEED 0xFFFFFFFF
+#define DDR400  ((UINT32) 1 << (DDR400_FREQUENCY  / 66))
+#define DDR533  ((UINT32) 1 << (DDR533_FREQUENCY  / 66))
+#define DDR667  ((UINT32) 1 << (DDR667_FREQUENCY  / 66))
+#define DDR800  ((UINT32) 1 << (DDR800_FREQUENCY  / 66))
+#define DDR1066 ((UINT32) 1 << (DDR1066_FREQUENCY / 66))
+#define DDR1333 ((UINT32) 1 << (DDR1333_FREQUENCY / 66))
+#define DDR1600 ((UINT32) 1 << (DDR1600_FREQUENCY / 66))
+#define DDR1866 ((UINT32) 1 << (DDR1866_FREQUENCY / 66))
+#define DDR2133 ((UINT32) 1 << (DDR2133_FREQUENCY / 66))
+#define DDR2400 ((UINT32) 1 << (DDR2400_FREQUENCY / 66))
+///
+///<  DIMM POPULATION MASKS
+///<    Specifies the DIMM Population on a channel (can be added together to specify configuration).
+///<    ex. SR_DIMM0 + SR_DIMM1                       : Single Rank Dimm in slot 0 AND Slot 1
+///<        SR_DIMM0 + DR_DIMM0 + SR_DIMM1 +DR_DIMM1  : Single OR Dual rank in Slot 0 AND Single OR Dual rank in Slot 1
+///
+#define ANY_       0xFF       ///< Any dimm configuration the current channel
+#define SR_DIMM0   0x0001     ///< Single rank dimm in slot 0 on the current channel
+#define SR_DIMM1   0x0010     ///< Single rank dimm in slot 1 on the current channel
+#define SR_DIMM2   0x0100     ///< Single rank dimm in slot 2 on the current channel
+#define SR_DIMM3   0x1000     ///< Single rank dimm in slot 3 on the current channel
+#define DR_DIMM0   0x0002     ///< Dual rank dimm in slot 0 on the current channel
+#define DR_DIMM1   0x0020     ///< Dual rank dimm in slot 1 on the current channel
+#define DR_DIMM2   0x0200     ///< Dual rank dimm in slot 2 on the current channel
+#define DR_DIMM3   0x2000     ///< Dual rank dimm in slot 3 on the current channel
+#define QR_DIMM0   0x0004     ///< Quad rank dimm in slot 0 on the current channel
+#define QR_DIMM1   0x0040     ///< Quad rank dimm in slot 1 on the current channel
+#define QR_DIMM2   0x0400     ///< Quad rank dimm in slot 2 on the current channel
+#define QR_DIMM3   0x4000     ///< Quad rank dimm in slot 3 on the current channel
+#define LR_DIMM0   0x0001     ///< Lrdimm in slot 0 on the current channel
+#define LR_DIMM1   0x0010     ///< Lrdimm in slot 1 on the current channel
+#define LR_DIMM2   0x0100     ///< Lrdimm in slot 2 on the current channel
+#define LR_DIMM3   0x1000     ///< Lrdimm in slot 3 on the current channel
+#define ANY_DIMM0   0x000F    ///< Any Dimm combination in slot 0 on the current channel
+#define ANY_DIMM1   0x00F0    ///< Any Dimm combination in slot 1 on the current channel
+#define ANY_DIMM2   0x0F00    ///< Any Dimm combination in slot 2 on the current channel
+#define ANY_DIMM3   0xF000    ///< Any Dimm combination in slot 3 on the current channel
+///
+///<  CS POPULATION MASKS
+///<    Specifies the CS Population on a channel (can be added together to specify configuration).
+///<    ex. CS0 + CS1                       : CS0 and CS1 apply to the setting
+///
+#define CS_ANY_       0xFF       ///< Any CS configuration
+#define CS0_   0x01     ///< CS0 bit map mask
+#define CS1_   0x02     ///< CS1 bit map mask
+#define CS2_   0x04     ///< CS2 bit map mask
+#define CS3_   0x08     ///< CS3 bit map mask
+#define CS4_   0x10     ///< CS4 bit map mask
+#define CS5_   0x20     ///< CS5 bit map mask
+#define CS6_   0x40     ///< CS6 bit map mask
+#define CS7_   0x80     ///< CS7 bit map mask
+///
+///< Number of Dimms on the current channel
+///<   This is a mask used to indicate the number of dimms in a channel
+///<   They can be added to indicate multiple conditions (i.e 1 OR 2 Dimms)
+///
+#define ANY_NUM     0xFF      ///< Any number of Dimms
+#define NO_DIMM     0x00      ///< No Dimms present
+#define ONE_DIMM    0x01      ///< One dimm Poulated on the current channel
+#define TWO_DIMM    0x02      ///< Two dimms Poulated on the current channel
+#define THREE_DIMM  0x04      ///< Three dimms Poulated on the current channel
+#define FOUR_DIMM   0x08      ///< Four dimms Poulated on the current channel
+
+///
+///<  DIMM VOLTAGE MASKS
+///
+#define VOLT_ANY_   0xFF      ///< Any voltage configuration
+#define VOLT1_5_    0x01      ///< Voltage 1.5V bit map mask
+#define VOLT1_35_   0x02      ///< Voltage 1.35V bit map mask
+#define VOLT1_25_   0x04      ///< Voltage 1.25V bit map mask
+
+//
+// < Not applicable
+//
+#define NA_ 0                 ///< Not applicable
+
+/*----------------------------------------------------------------------------------------
+ *
+ * Platform Specific Override Definitions for Socket, Channel and Dimm
+ * This indicates where a platform override will be applied.
+ *
+ *----------------------------------------------------------------------------------------
+ */
+///
+///< SOCKET MASKS
+///<   Indicates associated processor sockets to apply override settings
+///
+#define ANY_SOCKET     0xFF    ///<  Apply to all sockets
+#define SOCKET0        0x01    ///<  Apply to socket 0
+#define SOCKET1        0x02    ///<  Apply to socket 1
+#define SOCKET2        0x04    ///<  Apply to socket 2
+#define SOCKET3        0x08    ///<  Apply to socket 3
+#define SOCKET4        0x10    ///<  Apply to socket 4
+#define SOCKET5        0x20    ///<  Apply to socket 5
+#define SOCKET6        0x40    ///<  Apply to socket 6
+#define SOCKET7        0x80    ///<  Apply to socket 7
+///
+///< CHANNEL MASKS
+///<   Indicates Memory channels where override should be applied
+///
+#define ANY_CHANNEL    0xFF    ///<  Apply to all Memory channels
+#define CHANNEL_A      0x01    ///<  Apply to Channel A
+#define CHANNEL_B      0x02    ///<  Apply to Channel B
+#define CHANNEL_C      0x04    ///<  Apply to Channel C
+#define CHANNEL_D      0x08    ///<  Apply to Channel D
+///
+/// DIMM MASKS
+///   Indicates Dimm Slots where override should be applied
+///
+#define ALL_DIMMS      0xFF    ///<  Apply to all dimm slots
+#define DIMM0          0x01    ///<  Apply to Dimm Slot 0
+#define DIMM1          0x02    ///<  Apply to Dimm Slot 1
+#define DIMM2          0x04    ///<  Apply to Dimm Slot 2
+#define DIMM3          0x08    ///<  Apply to Dimm Slot 3
+///
+/// REGISTER ACCESS MASKS
+///   Not supported as an at this time
+///
+#define ACCESS_NB0     0x0
+#define ACCESS_NB1     0x1
+#define ACCESS_NB2     0x2
+#define ACCESS_NB3     0x3
+#define ACCESS_NB4     0x4
+#define ACCESS_PHY     0x5
+#define ACCESS_DCT_XT  0x6
+/*----------------------------------------------------------------------------------------
+ *
+ * Platform Specific Overriding Table Definitions
+ *
+ *----------------------------------------------------------------------------------------
+ */
+
+#define PSO_END           0     ///< Table End
+#define PSO_CKE_TRI       1     ///< CKE Tristate Map
+#define PSO_ODT_TRI       2     ///< ODT Tristate Map
+#define PSO_CS_TRI        3     ///< CS Tristate Map
+#define PSO_MAX_DIMMS     4     ///< Max Dimms per channel
+#define PSO_CLK_SPEED     5     ///< Clock Speed
+#define PSO_DIMM_TYPE     6     ///< Dimm Type
+#define PSO_MEMCLK_DIS    7     ///< MEMCLK Disable Map
+#define PSO_MAX_CHNLS     8     ///< Max Channels per Socket
+#define PSO_BUS_SPEED     9     ///< Max Memory Bus Speed
+#define PSO_MAX_CHIPSELS 10     ///< Max Chipsel per Channel
+#define PSO_MEM_TECH     11     ///< Channel Memory Type
+#define PSO_WL_SEED      12     ///< DDR3 Write Levelization Seed delay
+#define PSO_RXEN_SEED    13     ///< Hardwared based RxEn seed
+#define PSO_NO_LRDIMM_CS67_ROUTING 14     ///< CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs
+#define PSO_SOLDERED_DOWN_SODIMM_TYPE 15  ///< Soldered down SODIMM type
+#define PSO_LVDIMM_VOLT1_5_SUPPORT 16     ///< Force LvDimm voltage to 1.5V
+#define PSO_MIN_RD_WR_DATAEYE_WIDTH 17    ///< Min RD/WR dataeye width
+#define PSO_CPU_FAMILY_TO_OVERRIDE 18     ///< CPU family signature to tell following PSO macros are CPU family dependent
+
+/*----------------------------------
+ * CONDITIONAL PSO SPECIFIC ENTRIES
+ *---------------------------------*/
+// Condition Types
+#define CONDITIONAL_PSO_MIN   100     ///< Start of Conditional Entry Types
+#define PSO_CONDITION_AND     100     ///< And Block - Start of Conditional block
+#define PSO_CONDITION_LOC     101     ///< Location - Specify Socket, Channel, Dimms to be affected
+#define PSO_CONDITION_SPD     102     ///< SPD - Specify a specific SPD value on a Dimm on the channel
+#define PSO_CONDITION_REG     103     //   Reserved
+#define PSO_CONDITION_MAX     103     ///< End Of Condition Entry Types
+// Action Types
+#define PSO_ACTION_MIN        120     ///< Start of Action Entry Types
+#define PSO_ACTION_ODT        120     ///< ODT values to override
+#define PSO_ACTION_ADDRTMG    121     ///< Address/Timing values to override
+#define PSO_ACTION_ODCCONTROL 122     ///< ODC Control values to override
+#define PSO_ACTION_SLEWRATE   123     ///< Slew Rate value to override
+#define PSO_ACTION_REG        124     //   Reserved
+#define PSO_ACTION_SPEEDLIMIT 125     ///< Memory Bus speed Limit based on configuration
+#define PSO_ACTION_MAX        125     ///< End of Action Entry Types
+#define CONDITIONAL_PSO_MAX   139     ///< End of Conditional Entry Types
+
+/*----------------------------------
+ * TABLE DRIVEN PSO SPECIFIC ENTRIES
+ *---------------------------------*/
+// Condition descriptor
+#define PSO_TBLDRV_CONFIG        200  ///< Configuration Descriptor
+
+// Overriding entry types
+#define PSO_TBLDRV_START         210  ///< Start of Table Driven Overriding Entry Types
+#define PSO_TBLDRV_SPEEDLIMIT    210  ///< Speed Limit
+#define PSO_TBLDRV_ODT_RTTNOM    211  ///< RttNom
+#define PSO_TBLDRV_ODT_RTTWR     212  ///< RttWr
+#define PSO_TBLDRV_ODTPATTERN    213  ///< Odt Patterns
+#define PSO_TBLDRV_ADDRTMG       214  ///< Address/Timing values
+#define PSO_TBLDRV_ODCCTRL       215  ///< ODC Control values
+#define PSO_TBLDRV_SLOWACCMODE   216  ///< Slow Access Mode
+#define PSO_TBLDRV_MR0_CL        217  ///< MR0[CL]
+#define PSO_TBLDRV_MR0_WR        218  ///< MR0[WR]
+#define PSO_TBLDRV_RC2_IBT       219  ///< RC2[IBT]
+#define PSO_TBLDRV_RC10_OPSPEED  220  ///< RC10[Opearting Speed]
+#define PSO_TBLDRV_LRDIMM_IBT    221  ///< LrDIMM IBT
+#define PSO_TBLDRV____TRAINING   222  ///< training
+#define PSO_TBLDRV_INVALID_TYPE  223  ///< Invalid Type
+#define PSO_TBLDRV_END           223  ///< End of Table Driven Overriding Entry Types
+
+/*----------------------------------------------------------------------------------------
+ *                 CONDITIONAL OVERRIDE TABLE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+#define CPU_FAMILY_TO_OVERRIDE(CpuFamilyRevision) \
+  PSO_CPU_FAMILY_TO_OVERRIDE, 4, \
+  ((CpuFamilyRevision) & 0x0FF), (((CpuFamilyRevision) >> 8)& 0x0FF), (((CpuFamilyRevision) >> 16)& 0x0FF), (((CpuFamilyRevision) >> 24)& 0x0FF)
+
+#define MEMCLK_DIS_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \
+  PSO_MEMCLK_DIS, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map \
+  , Bit7Map
+
+#define CKE_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map) \
+  PSO_CKE_TRI, 5, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map
+
+#define ODT_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map) \
+  PSO_ODT_TRI, 7, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map
+
+#define CS_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \
+  PSO_CS_TRI, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map
+
+#define NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) \
+  PSO_MAX_DIMMS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfDimmSlotsPerChannel
+
+#define NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) \
+  PSO_MAX_CHIPSELS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfChipSelectsPerChannel
+
+#define NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) \
+  PSO_MAX_CHNLS, 4, SocketID, ANY_CHANNEL, ALL_DIMMS, NumberOfChannelsPerSocket
+
+#define OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, TimingMode, BusSpeed) \
+  PSO_BUS_SPEED, 11, SocketID, ChannelID, ALL_DIMMS, TimingMode, (TimingMode >> 8), (TimingMode >> 16), (TimingMode >> 24), \
+  BusSpeed, (BusSpeed >> 8), (BusSpeed >> 16), (BusSpeed >> 24)
+
+#define DRAM_TECHNOLOGY(SocketID, MemTechType) \
+  PSO_MEM_TECH, 7, SocketID, ANY_CHANNEL, ALL_DIMMS, MemTechType, (MemTechType >> 8), (MemTechType >> 16), (MemTechType >> 24)
+
+#define WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \
+  Byte6Seed, Byte7Seed, ByteEccSeed) \
+  PSO_WL_SEED, 12, SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \
+  Byte6Seed, Byte7Seed, ByteEccSeed
+
+#define HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \
+  Byte6Seed, Byte7Seed, ByteEccSeed) \
+  PSO_RXEN_SEED, 21, SocketID, ChannelID, DimmID, Byte0Seed, (Byte0Seed >> 8), Byte1Seed, (Byte1Seed >> 8), Byte2Seed, (Byte2Seed >> 8), \
+  Byte3Seed, (Byte3Seed >> 8), Byte4Seed, (Byte4Seed >> 8), Byte5Seed, (Byte5Seed >> 8), Byte6Seed, (Byte6Seed >> 8), \
+  Byte7Seed, (Byte7Seed >> 8), ByteEccSeed, (ByteEccSeed >> 8)
+
+#define NO_LRDIMM_CS67_ROUTING(SocketID, ChannelID) \
+  PSO_NO_LRDIMM_CS67_ROUTING, 4, SocketID, ChannelID, ALL_DIMMS, TRUE
+
+#define SOLDERED_DOWN_SODIMM_TYPE(SocketID, ChannelID) \
+  PSO_SOLDERED_DOWN_SODIMM_TYPE, 4, SocketID, ChannelID, ALL_DIMMS, TRUE
+
+#define LVDIMM_FORCE_VOLT1_5_FOR_D0 \
+  PSO_LVDIMM_VOLT1_5_SUPPORT, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, TRUE
+
+#define MIN_RD_WR_DATAEYE_WIDTH(SocketID, ChannelID, MinRdDataeyeWidth, MinWrDataeyeWidth) \
+  PSO_MIN_RD_WR_DATAEYE_WIDTH, 5, SocketID, ChannelID, ALL_DIMMS, MinRdDataeyeWidth, MinWrDataeyeWidth
+
+/*----------------------------------------------------------------------------------------
+ *                 CONDITIONAL OVERRIDE TABLE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+#define CONDITION_AND \
+  PSO_CONDITION_AND, 0
+
+#define COND_LOC(SocketMsk, ChannelMsk, DimmMsk) \
+  PSO_CONDITION_LOC, 3, SocketMsk, ChannelMsk, DimmMsk
+
+#define COND_SPD(Byte, Mask, Value) \
+  PSO_CONDITION_SPD, 3, Byte, Mask, Value
+
+#define COND_REG(Access, Offset, Mask, Value) \
+ PSO_CONDITION_REG, 11, Access, (Offset & 0x0FF), (Offset >> 8), \
+   ((Mask) & 0x0FF), (((Mask) >> 8) & 0x0FF), (((Mask) >> 16) & 0x0FF), (((Mask) >> 24) & 0x0FF), \
+   ((Value) & 0x0FF), (((Value) >> 8) & 0x0FF), (((Value) >> 16) & 0x0FF), (((Value) >> 24) & 0x0FF)
+
+#define ACTION_ODT(Frequency, Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt) \
+  PSO_ACTION_ODT, 9, \
+  ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), ((Frequency >> 24)& 0x0FF), \
+  Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt
+
+#define ACTION_ADDRTMG(Frequency, DimmConfig, AddrTmg) \
+  PSO_ACTION_ADDRTMG, 10, \
+  ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+  ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+  (AddrTmg & 0x0FF), ((AddrTmg >> 8)& 0x0FF), ((AddrTmg >> 16)& 0x0FF), ((AddrTmg >> 24)& 0x0FF)
+
+#define ACTION_ODCCTRL(Frequency, DimmConfig, OdcCtrl) \
+  PSO_ACTION_ODCCONTROL, 10, \
+  ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+  ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+  (OdcCtrl & 0x0FF), ((OdcCtrl >> 8)& 0x0FF), ((OdcCtrl >> 16)& 0x0FF), ((OdcCtrl >> 24)& 0x0FF)
+
+#define ACTION_SLEWRATE(Frequency, DimmConfig, SlewRate) \
+  PSO_ACTION_SLEWRATE, 10, \
+  ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+  ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+  (SlewRate & 0x0FF), ((SlewRate >> 8)& 0x0FF), ((SlewRate >> 16)& 0x0FF), ((SlewRate >> 24)& 0x0FF)
+
+#define ACTION_SPEEDLIMIT(DimmConfig, Dimms, SpeedLimit15, SpeedLimit135, SpeedLimit125) \
+  PSO_ACTION_SPEEDLIMIT, 9, \
+  ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), Dimms, \
+  (SpeedLimit15 & 0x0FF), ((SpeedLimit15 >> 8)& 0x0FF), \
+  (SpeedLimit135 & 0x0FF), ((SpeedLimit135 >> 8)& 0x0FF), \
+  (SpeedLimit125 & 0x0FF), ((SpeedLimit125 >> 8)& 0x0FF)
+
+/*----------------------------------------------------------------------------------------
+ *                 END OF CONDITIONAL OVERRIDE TABLE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------
+ *                 TABLE DRIVEN OVERRIDE  MACROS
+ *----------------------------------------------------------------------------------------
+ */
+/// Configuration sub-descriptors
+typedef enum {
+  CONFIG_GENERAL,        ///< CONFIG_GENERAL
+  CONFIG_SPEEDLIMIT,     ///< CONFIG_SPEEDLIMIT
+  CONFIG_RC2IBT,         ///< CONFIG_RC2IBT
+  CONFIG_DONT_CARE,      ///< CONFIG_DONT_CARE
+} Config_Type;
+
+// ====================
+// Configuration Macros
+// ====================
+#define TBLDRV_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig) \
+  PSO_TBLDRV_CONFIG, 9, \
+  CONFIG_GENERAL, \
+  DimmPerCH, DimmVolt, \
+  ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+  ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF)
+
+#define TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE(DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm) \
+  PSO_TBLDRV_CONFIG, 7, \
+  CONFIG_SPEEDLIMIT, \
+  DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm
+
+#define TBLDRV_RC2IBT_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig, NumOfReg) \
+  PSO_TBLDRV_CONFIG, 10, \
+  CONFIG_RC2IBT, \
+  DimmPerCH, DimmVolt, \
+  ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+  ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+  NumOfReg
+
+//==================
+// Overriding Macros
+//==================
+#define TBLDRV_CONFIG_ENTRY_SPEEDLIMIT(SpeedLimit1_5, SpeedLimit1_35, SpeedLimit1_25) \
+  PSO_TBLDRV_SPEEDLIMIT, 6, \
+  (SpeedLimit1_5 & 0x0FF), ((SpeedLimit1_5 >> 8)& 0x0FF), \
+  (SpeedLimit1_35 & 0x0FF), ((SpeedLimit1_35 >> 8)& 0x0FF), \
+  (SpeedLimit1_25 & 0x0FF), ((SpeedLimit1_25 >> 8)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_ODT_RTTNOM(TgtCS, RttNom) \
+  PSO_TBLDRV_ODT_RTTNOM, 2, \
+  TgtCS, RttNom
+
+#define TBLDRV_CONFIG_ENTRY_ODT_RTTWR(TgtCS, RttWr) \
+  PSO_TBLDRV_ODT_RTTWR, 2, \
+  TgtCS, RttWr
+
+#define TBLDRV_CONFIG_ENTRY_ODTPATTERN(RdODTCSHigh, RdODTCSLow, WrODTCSHigh, WrODTCSLow) \
+  PSO_TBLDRV_ODTPATTERN, 16, \
+  ((RdODTCSHigh) & 0x0FF), (((RdODTCSHigh) >> 8)& 0x0FF), (((RdODTCSHigh) >> 16)& 0x0FF), (((RdODTCSHigh) >> 24)& 0x0FF), \
+  ((RdODTCSLow) & 0x0FF), (((RdODTCSLow) >> 8)& 0x0FF), (((RdODTCSLow) >> 16)& 0x0FF), (((RdODTCSLow) >> 24)& 0x0FF), \
+  ((WrODTCSHigh) & 0x0FF), (((WrODTCSHigh) >> 8)& 0x0FF), (((WrODTCSHigh) >> 16)& 0x0FF), (((WrODTCSHigh) >> 24)& 0x0FF), \
+  ((WrODTCSLow) & 0x0FF), (((WrODTCSLow) >> 8)& 0x0FF), (((WrODTCSLow) >> 16)& 0x0FF), (((WrODTCSLow) >> 24)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_ADDRTMG(AddrTmg) \
+  PSO_TBLDRV_ADDRTMG, 4, \
+  ((AddrTmg) & 0x0FF), (((AddrTmg) >> 8)& 0x0FF), (((AddrTmg) >> 16)& 0x0FF), (((AddrTmg) >> 24)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_ODCCTRL(OdcCtrl) \
+  PSO_TBLDRV_ODCCTRL, 4, \
+  ((OdcCtrl) & 0x0FF), (((OdcCtrl) >> 8)& 0x0FF), (((OdcCtrl) >> 16)& 0x0FF), (((OdcCtrl) >> 24)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_SLOWACCMODE(SlowAccMode) \
+  PSO_TBLDRV_SLOWACCMODE, 1, \
+  SlowAccMode
+
+#define TBLDRV_CONFIG_ENTRY_RC2_IBT(TgtDimm, IBT) \
+  PSO_TBLDRV_RC2_IBT, 2, \
+  TgtDimm, IBT
+
+#define TBLDRV_OVERRIDE_MR0_CL(RegValOfTcl, MR0CL13, MR0CL0) \
+  PSO_TBLDRV_CONFIG, 1, \
+  CONFIG_DONT_CARE, \
+  PSO_TBLDRV_MR0_CL, 3, \
+  RegValOfTcl, MR0CL13, MR0CL0
+
+#define TBLDRV_OVERRIDE_MR0_WR(RegValOfTwr, MR0WR) \
+  PSO_TBLDRV_CONFIG, 1, \
+  CONFIG_DONT_CARE, \
+  PSO_TBLDRV_MR0_WR, 2, \
+  RegValOfTwr, MR0WR
+
+#define TBLDRV_OVERRIDE_RC10_OPSPEED(Frequency, MR10OPSPEED) \
+  PSO_TBLDRV_CONFIG, 1, \
+  CONFIG_DONT_CARE, \
+  PSO_TBLDRV_RC10_OPSPEED, 5, \
+  ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+  MR10OPSPEED
+
+#define TBLDRV_CONFIG_ENTRY_LRDMM_IBT(F0RC8, F1RC0, F1RC1, F1RC2) \
+  PSO_TBLDRV_LRDIMM_IBT, 4, \
+  F0RC8, F1RC0, F1RC1, F1RC2
+
+#define TBLDRV_CONFIG_ENTRY____TRAINING(Training__Mode) \
+  PSO_TBLDRV____TRAINING, 1, \
+  Training__Mode
+
+//============================
+// Macros for removing entries
+//============================
+#define INVALID_CONFIG_FLAG   0x8000
+
+#define TBLDRV_INVALID_CONFIG \
+  PSO_TBLDRV_INVALID_TYPE, 0
+
+/*----------------------------------------------------------------------------------------
+ *                 END OF TABLE DRIVEN OVERRIDE  MACROS
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _PLATFORM_MEMORY_CONFIGURATION_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/SanMarinoInstall.h b/src/vendorcode/amd/agesa/f15/Include/SanMarinoInstall.h
new file mode 100644
index 0000000000..6e0393c4c7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/SanMarinoInstall.h
@@ -0,0 +1,116 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build options for a SanMarino platform solution
+ *
+ * This file generates the defaults tables for the "San Marino" platform solution
+ * set of processors. The documented build options are imported from a user
+ * controlled file for processing.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 59375 $   @e \$Date: 2011-09-21 13:24:35 -0600 (Wed, 21 Sep 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFeatures.h"
+#include "Table.h"
+#include "CommonReturns.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "GnbInterfaceStub.h"
+
+/*****************************************************************************
+ *   Define the RELEASE VERSION string
+ *
+ * The Release Version string should identify the next planned release.
+ * When a branch is made in preparation for a release, the release manager
+ * should change/confirm that the branch version of this file contains the
+ * string matching the desired version for the release. The trunk version of
+ * the file should always contain a trailing 'X'. This will make sure that a
+ * development build from trunk will not be confused for a released version.
+ * The release manager will need to remove the trailing 'X' and update the
+ * version string as appropriate for the release. The trunk copy of this file
+ * should also be updated/incremented for the next expected version, + trailing 'X'
+ ****************************************************************************/
+                  // This is the delivery package title, "OrochiPI"
+                  // This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING  {'O', 'r', 'o', 'c', 'h', 'i', 'P', 'I'}
+
+                  // This is the release version number of the AGESA component
+                  // This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING  {'V', '1', '.', '2', '.', '0', '.', '0', ' ', ' ', ' ', ' '}
+
+
+// The San Marino solution is defined to be families 0x10 and 0x15 models 0x0 - 0xF in the C32 socket.
+#define INSTALL_C32_SOCKET_SUPPORT           TRUE
+#define INSTALL_FAMILY_10_SUPPORT            TRUE
+#define INSTALL_FAMILY_15_MODEL_0x_SUPPORT   TRUE
+
+#ifdef BLDOPT_REMOVE_FAMILY_10_SUPPORT
+  #if BLDOPT_REMOVE_FAMILY_10_SUPPORT == TRUE
+    #undef INSTALL_FAMILY_10_SUPPORT
+    #define INSTALL_FAMILY_10_SUPPORT     FALSE
+  #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_FAMILY_15_SUPPORT
+  #if BLDOPT_REMOVE_FAMILY_15_SUPPORT == TRUE
+    #undef INSTALL_FAMILY_15_MODEL_0x_SUPPORT
+    #define INSTALL_FAMILY_15_MODEL_0x_SUPPORT     FALSE
+  #endif
+#endif
+
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file.  The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE            (0xFF)
+#define DFLT_SCRUB_L2_RATE              (0x10)
+#define DFLT_SCRUB_L3_RATE              (0x10)
+#define DFLT_SCRUB_IC_RATE              (0)
+#define DFLT_SCRUB_DC_RATE              (0x12)
+#define DFLT_MEMORY_QUADRANK_TYPE       QUADRANK_REGISTERED
+#define DFLT_VRM_SLEW_RATE              (2500)
+
+
+// Instantiate all solution relevant data.
+#include "PlatformInstall.h"
+
diff --git a/src/vendorcode/amd/agesa/f15/Include/ScorpiusInstall.h b/src/vendorcode/amd/agesa/f15/Include/ScorpiusInstall.h
new file mode 100644
index 0000000000..bb152d7eba
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/ScorpiusInstall.h
@@ -0,0 +1,115 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build options for a Scorpius platform solution
+ *
+ * This file generates the defaults tables for the "Scorpius" platform solution
+ * set of processors. The documented build options are imported from a user
+ * controlled file for processing.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 59375 $   @e \$Date: 2011-09-21 13:24:35 -0600 (Wed, 21 Sep 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFeatures.h"
+#include "Table.h"
+#include "CommonReturns.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "GnbInterfaceStub.h"
+
+/*****************************************************************************
+ *   Define the RELEASE VERSION string
+ *
+ * The Release Version string should identify the next planned release.
+ * When a branch is made in preparation for a release, the release manager
+ * should change/confirm that the branch version of this file contains the
+ * string matching the desired version for the release. The trunk version of
+ * the file should always contain a trailing 'X'. This will make sure that a
+ * development build from trunk will not be confused for a released version.
+ * The release manager will need to remove the trailing 'X' and update the
+ * version string as appropriate for the release. The trunk copy of this file
+ * should also be updated/incremented for the next expected version, + trailing 'X'
+ ****************************************************************************/
+                  // This is the delivery package title, "OrochiPI"
+                  // This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING  {'O', 'r', 'o', 'c', 'h', 'i', 'P', 'I'}
+
+                  // This is the release version number of the AGESA component
+                  // This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING  {'V', '1', '.', '2', '.', '0', '.', '0', ' ', ' ', ' ', ' '}
+
+
+// The Scorpius solution is defined to be families 0x10 and 0x15 models 0x0 - 0xF in the AM3 socket.
+#define INSTALL_AM3_SOCKET_SUPPORT           TRUE
+#define INSTALL_FAMILY_10_SUPPORT            TRUE
+#define INSTALL_FAMILY_15_MODEL_0x_SUPPORT   TRUE
+
+#ifdef BLDOPT_REMOVE_FAMILY_10_SUPPORT
+  #if BLDOPT_REMOVE_FAMILY_10_SUPPORT == TRUE
+    #undef INSTALL_FAMILY_10_SUPPORT
+    #define INSTALL_FAMILY_10_SUPPORT     FALSE
+  #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_FAMILY_15_SUPPORT
+  #if BLDOPT_REMOVE_FAMILY_15_SUPPORT == TRUE
+    #undef INSTALL_FAMILY_15_MODEL_0x_SUPPORT
+    #define INSTALL_FAMILY_15_MODEL_0x_SUPPORT     FALSE
+  #endif
+#endif
+
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file.  The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE            (0xFF)
+#define DFLT_SCRUB_L2_RATE              (0x10)
+#define DFLT_SCRUB_L3_RATE              (0x10)
+#define DFLT_SCRUB_IC_RATE              (0)
+#define DFLT_SCRUB_DC_RATE              (0x12)
+#define DFLT_MEMORY_QUADRANK_TYPE       QUADRANK_REGISTERED
+#define DFLT_VRM_SLEW_RATE              (2500)
+
+
+// Instantiate all solution relevant data.
+#include "PlatformInstall.h"
+
diff --git a/src/vendorcode/amd/agesa/f15/Include/Topology.h b/src/vendorcode/amd/agesa/f15/Include/Topology.h
new file mode 100644
index 0000000000..915e13c19e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/Topology.h
@@ -0,0 +1,163 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Topology interface definitions.
+ *
+ * Contains AMD AGESA internal interface for topology related data which
+ * is consumed by code other than HyperTransport init (and produced by
+ * HyperTransport init.)
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _TOPOLOGY_H_
+#define _TOPOLOGY_H_
+
+// Defines for limiting data structure maximum allocation and limit checking.
+#define MAX_NODES 8
+#define MAX_SOCKETS MAX_NODES
+#define MAX_DIES 2
+
+// Defines useful with package link
+#define HT_LIST_MATCH_INTERNAL_LINK_0 0xFA
+#define HT_LIST_MATCH_INTERNAL_LINK_1 0xFB
+#define HT_LIST_MATCH_INTERNAL_LINK_2 0xFC
+
+/**
+ * Hop Count Table.
+ * This is a heap data structure.  The Hops array is filled as a size x size matrix.
+ * The unused space, if any, is all at the end.
+ */
+typedef struct {
+  UINT8 Size;                         ///< The row and column size of actual hop count data */
+  UINT8 Hops[MAX_NODES * MAX_NODES];  ///< Room for a dynamic two dimensional array of [size][size] */
+} HOP_COUNT_TABLE;
+
+/**
+ * Socket and Module to Node Map Item.
+ * Provide the Node Id and core id range for each module in each processor.
+ */
+typedef struct {
+  UINT8 Node;                 ///< The module's Node id.
+  UINT8 LowCore;              ///< The lowest processor core id for this module.
+  UINT8 HighCore;             ///< The highest processor core id for this module.
+  UINT8 EnabledComputeUnits;  ///< The value of Enabled for this processor module.
+  UINT8 DualCoreComputeUnits; ///< The value of DualCore for this processor module.
+} SOCKET_DIE_TO_NODE_ITEM;
+
+/**
+ * Socket and Module to Node Map.
+ * This type is a pointer to the actual map, it can be used for a struct item or
+ * for typecasting a heap buffer pointer.
+ */
+typedef SOCKET_DIE_TO_NODE_ITEM (*SOCKET_DIE_TO_NODE_MAP)[MAX_SOCKETS][MAX_DIES];
+
+/**
+ * Node id to Socket Die Map Item.
+ */
+typedef struct {
+  UINT8 Socket;             ///< socket of the processor containing the Node.
+  UINT8 Die;                ///< the module in the processor which is Node.
+} NODE_TO_SOCKET_DIE_ITEM;
+
+/**
+ * Node id to Socket Die Map.
+ */
+typedef NODE_TO_SOCKET_DIE_ITEM (*NODE_TO_SOCKET_DIE_MAP)[MAX_NODES];
+
+/**
+ * Provide AP core with socket and node context at start up.
+ * This information is posted to the AP cores using a register as a mailbox.
+ */
+typedef struct {
+  UINT32 Node:4;          ///< The node id of Core's node.
+  UINT32 Socket:4;        ///< The socket of this Core's node.
+  UINT32 Module:2;        ///< The internal module number for Core's node.
+  UINT32 ModuleType:2;    ///< Single Module = 0, Multi-module = 1.
+  UINT32 :20;             ///< Reserved
+} AP_MAIL_INFO_FIELDS;
+
+/**
+ * AP info fields can be written and read to a register.
+ */
+typedef union {
+  UINT32              Info;        ///< Just a number for register access, or opaque passing.
+  AP_MAIL_INFO_FIELDS Fields;      ///< access to the info fields.
+} AP_MAIL_INFO;
+
+/**
+ * Provide AP core with system degree and system core number at start up.
+ * This information is posted to the AP cores using a register as a mailbox.
+ */
+typedef struct {
+  UINT32 SystemDegree:3;  ///< The number of connected links
+  UINT32 :3;              ///< Reserved
+  UINT32 HeapIndex:6;     ///< The zero-based system core number
+  UINT32 :20;             ///< Reserved
+} AP_MAIL_EXT_INFO_FIELDS;
+
+/**
+ * AP info fields can be written and read to a register.
+ */
+typedef union {
+  UINT32              Info;        ///< Just a number for register access, or opaque passing.
+  AP_MAIL_EXT_INFO_FIELDS Fields;  ///< access to the info fields.
+} AP_MAIL_EXT_INFO;
+
+/**
+ * AP Info mailbox set.
+ */
+typedef struct {
+  AP_MAIL_INFO      ApMailInfo;    ///< The AP mail info
+  AP_MAIL_EXT_INFO  ApMailExtInfo; ///< The extended AP mail info
+} AP_MAILBOXES;
+
+/**
+ * Provide a northbridge to package mapping for link assignments.
+ *
+ */
+typedef struct {
+  UINT8  Link;             ///< The Node's link
+  UINT8  Module;           ///< The internal module position of Node
+  UINT8  PackageLink;      ///< The corresponding package link
+} PACKAGE_HTLINK_MAP_ITEM;
+
+/**
+ * A Processor's complete set of link assignments
+ */
+typedef PACKAGE_HTLINK_MAP_ITEM (*PACKAGE_HTLINK_MAP)[];
+
+#endif  // _TOPOLOGY_H_
diff --git a/src/vendorcode/amd/agesa/f15/Include/gcc-intrin.h b/src/vendorcode/amd/agesa/f15/Include/gcc-intrin.h
new file mode 100644
index 0000000000..3191348b5c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Include/gcc-intrin.h
@@ -0,0 +1,628 @@
+/*
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#if defined (__GNUC__)
+
+
+/* I/O intrin functions.  */
+static __inline__ __attribute__((always_inline)) unsigned char __inbyte(unsigned short Port)
+{
+  unsigned char value;
+
+  __asm__ __volatile__ (
+    "in  %%dx, %%al"
+    : "=a" (value)
+    : "d" (Port)
+    );
+
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned short __inword(unsigned short Port)
+{
+  unsigned short value;
+
+  __asm__ __volatile__ (
+    "in  %%dx, %%ax"
+    : "=a" (value)
+    : "d" (Port)
+    );
+
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __indword(unsigned short Port)
+{
+  unsigned long value;
+
+  __asm__ __volatile__ (
+    "in  %%dx, %%eax"
+    : "=a" (value)
+    : "d" (Port)
+    );
+  return value;
+
+}
+
+static __inline__ __attribute__((always_inline)) void __outbyte(unsigned short Port,unsigned char Data)
+{
+  __asm__ __volatile__ (
+    "out  %%al, %%dx"
+    :
+    : "a" (Data), "d" (Port)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __outword(unsigned short Port,unsigned short Data)
+{
+  __asm__ __volatile__ (
+    "out  %%ax, %%dx"
+    :
+    : "a" (Data), "d" (Port)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __outdword(unsigned short Port,unsigned long Data)
+{
+  __asm__ __volatile__ (
+    "out  %%eax, %%dx"
+    :
+    : "a" (Data), "d" (Port)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __inbytestring(unsigned short Port,unsigned char *Buffer,unsigned long Count)
+{
+  __asm__ __volatile__ (
+    "cld ; rep ; insb "
+    : "=D" (Buffer), "=c" (Count)
+    : "d"(Port), "0"(Buffer), "1" (Count)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __inwordstring(unsigned short Port,unsigned short *Buffer,unsigned long Count)
+{
+  __asm__ __volatile__ (
+    "cld ; rep ; insw "
+    : "=D" (Buffer), "=c" (Count)
+    : "d"(Port), "0"(Buffer), "1" (Count)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __indwordstring(unsigned short Port,unsigned long *Buffer,unsigned long Count)
+{
+  __asm__ __volatile__ (
+    "cld ; rep ; insl "
+    : "=D" (Buffer), "=c" (Count)
+    : "d"(Port), "0"(Buffer), "1" (Count)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __outbytestring(unsigned short Port,unsigned char *Buffer,unsigned long Count)
+{
+  __asm__ __volatile__ (
+    "cld ; rep ; outsb "
+    : "=S" (Buffer), "=c" (Count)
+    : "d"(Port), "0"(Buffer), "1" (Count)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __outwordstring(unsigned short Port,unsigned short *Buffer,unsigned long Count)
+{
+  __asm__ __volatile__ (
+    "cld ; rep ; outsw "
+    : "=S" (Buffer), "=c" (Count)
+    : "d"(Port), "0"(Buffer), "1" (Count)
+  );
+}
+
+static __inline__ __attribute__((always_inline)) void __outdwordstring(unsigned short Port,unsigned long *Buffer,unsigned long Count)
+{
+  __asm__ __volatile__ (
+   "cld ; rep ; outsl "
+   : "=S" (Buffer), "=c" (Count)
+   : "d"(Port), "0"(Buffer), "1" (Count)
+   );
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr0(void)
+{
+  unsigned long value;
+  __asm__ __volatile__ (
+    "mov %%dr0, %[value]"
+    : [value] "=a" (value)
+    );
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr1(void)
+{
+  unsigned long value;
+  __asm__ __volatile__ (
+    "mov %%dr1, %[value]"
+    : [value] "=a" (value)
+    );
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr2(void)
+{
+  unsigned long value;
+  __asm__ __volatile__ (
+    "mov %%dr2, %[value]"
+    : [value] "=a" (value)
+    );
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr3(void)
+{
+  unsigned long value;
+  __asm__ __volatile__ (
+    "mov %%dr3, %[value]"
+    : [value] "=a" (value)
+    );
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr7(void)
+{
+  unsigned long value;
+  __asm__ __volatile__ (
+    "mov %%dr7, %[value]"
+    : [value] "=a" (value)
+    );
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr(unsigned long reg)
+{
+  switch (reg){
+    case 0:
+      return __readdr0 ();
+      break;
+
+    case 1:
+      return __readdr1 ();
+      break;
+
+    case 2:
+      return __readdr2 ();
+      break;
+
+    case 3:
+      return __readdr3 ();
+      break;
+
+    case 7:
+      return __readdr7 ();
+      break;
+
+    default:
+      return -1;
+  }
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr0(unsigned long Data)
+{
+  __asm__ __volatile__ (
+    "mov %%eax, %%dr0"
+    :
+    : "a" (Data)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr1(unsigned long Data)
+{
+  __asm__ __volatile__ (
+    "mov %%eax, %%dr1"
+    :
+    : "a" (Data)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr2(unsigned long Data)
+{
+  __asm__ __volatile__ (
+    "mov %%eax, %%dr2"
+    :
+    : "a" (Data)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr3(unsigned long Data)
+{
+  __asm__ __volatile__ (
+    "mov %%eax, %%dr3"
+    :
+    : "a" (Data)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr7(unsigned long Data)
+{
+  __asm__ __volatile__ (
+    "mov %%eax, %%dr7"
+    :
+    : "a" (Data)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr(unsigned long reg, unsigned long Data)
+{
+  switch (reg){
+    case 0:
+      __writedr0 (Data);
+      break;
+
+    case 1:
+      __writedr1 (Data);
+      break;
+
+    case 2:
+      __writedr2 (Data);
+      break;
+
+    case 3:
+      __writedr3 (Data);
+      break;
+
+    case 7:
+      __writedr7 (Data);
+      break;
+
+    default:
+      ;
+  }
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr0(void)
+{
+  unsigned long value;
+  __asm__ __volatile__ (
+    "mov %%cr0, %[value]"
+    : [value] "=a" (value));
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr2(void)
+{
+  unsigned long value;
+  __asm__ __volatile__ (
+    "mov %%cr2, %[value]"
+    : [value] "=a" (value));
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr3(void)
+{
+  unsigned long value;
+  __asm__ __volatile__ (
+    "mov %%cr3, %[value]"
+    : [value] "=a" (value));
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr4(void)
+{
+  unsigned long value;
+  __asm__ __volatile__ (
+    "mov %%cr4, %[value]"
+    : [value] "=a" (value));
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr8(void)
+{
+  unsigned long value;
+  __asm__ __volatile__ (
+    "mov %%cr8, %[value]"
+    : [value] "=a" (value));
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr(unsigned long reg)
+{
+  switch (reg){
+    case 0:
+      return __readcr0 ();
+      break;
+
+    case 2:
+      return __readcr2 ();
+      break;
+
+    case 3:
+      return __readcr3 ();
+      break;
+
+    case 4:
+      return __readcr4 ();
+      break;
+
+    case 8:
+      return __readcr8 ();
+      break;
+
+    default:
+      return -1;
+  }
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr0(unsigned long Data)
+{
+  __asm__ __volatile__ (
+    "mov %%eax, %%cr0"
+    :
+    : "a" (Data)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr2(unsigned long Data)
+{
+  __asm__ __volatile__ (
+    "mov %%eax, %%cr2"
+    :
+    : "a" (Data)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr3(unsigned long Data)
+{
+  __asm__ __volatile__ (
+    "mov %%eax, %%cr3"
+    :
+    : "a" (Data)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr4(unsigned long Data)
+{
+  __asm__ __volatile__ (
+    "mov %%eax, %%cr4"
+    :
+    : "a" (Data)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr8(unsigned long Data)
+{
+  __asm__ __volatile__ (
+    "mov %%eax, %%cr8"
+    :
+    : "a" (Data)
+    );
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr(unsigned long reg, unsigned long Data)
+{
+  switch (reg){
+    case 0:
+      __writecr0 (Data);
+      break;
+
+    case 2:
+      __writecr2 (Data);
+      break;
+
+    case 3:
+      __writecr3 (Data);
+      break;
+
+    case 4:
+      __writecr4 (Data);
+      break;
+
+    case 8:
+      __writecr8 (Data);
+      break;
+
+    default:
+      ;
+  }
+}
+
+static __inline__ __attribute__((always_inline)) UINT64 __readmsr(UINT32 msr)
+{
+  UINT64 retval;
+  __asm__ __volatile__(
+       "rdmsr\n\t"
+       : "=A" (retval)
+       : "c" (msr)
+       );
+   return retval;
+}
+
+static __inline__ __attribute__((always_inline)) void __writemsr (UINT32 msr, UINT64 Value)
+{
+  __asm__ __volatile__ (
+     "wrmsr\n\t"
+     :
+     : "c" (msr), "A" (Value)
+     );
+}
+
+static __inline__ __attribute__((always_inline)) UINT64 __rdtsc(void)
+{
+  UINT64 retval;
+  __asm__ __volatile__ (
+     "rdtsc"
+     : "=A" (retval));
+  return retval;
+}
+
+static __inline__ __attribute__((always_inline)) void __cpuid(int CPUInfo[], const int InfoType)
+{
+   __asm__ __volatile__(
+     "cpuid"
+     :"=a" (CPUInfo[0]), "=b" (CPUInfo[1]), "=c" (CPUInfo[2]), "=d" (CPUInfo[3])
+     : "a" (InfoType)
+     );
+}
+
+
+static __inline__ __attribute__((always_inline)) void _disable(void)
+{
+  __asm__ __volatile__ ("cli");
+}
+
+
+static __inline__ __attribute__((always_inline)) void _enable(void)
+{
+  __asm__ __volatile__ ("sti");
+}
+
+
+static __inline__ __attribute__((always_inline)) void __halt(void)
+{
+  __asm__ __volatile__ ("hlt");
+}
+
+
+static __inline__ __attribute__((always_inline)) void __debugbreak(void)
+{
+  __asm__ __volatile__ ("int3");
+}
+
+
+static __inline__ __attribute__((always_inline)) void __wbinvd(void)
+{
+  __asm__ __volatile__ ("wbinvd");
+}
+
+
+static __inline__ __attribute__((always_inline)) void __lidt(void *Source)
+{
+  __asm__ __volatile__("lidt %0" : : "m"(*(short*)Source));
+}
+
+static __inline__ __attribute__((always_inline)) void __writefsbyte(const unsigned long Offset, const unsigned char Data)
+{
+  __asm__("movb %b[Data], %%fs:%a[Offset]" : : [Offset] "ir" (Offset), [Data] "iq" (Data));
+}
+
+static __inline__ __attribute__((always_inline)) void __writefsword(const unsigned long Offset, const unsigned short Data)
+{
+  __asm__("movw %w[Data], %%fs:%a[Offset]" : : [Offset] "ir" (Offset), [Data] "iq" (Data));
+}
+
+static __inline__ __attribute__((always_inline)) void __writefsdword(const unsigned long Offset, const unsigned long Data)
+{
+  __asm__("movl %k[Data], %%fs:%a[Offset]" : : [Offset] "ir" (Offset), [Data] "iq" (Data));
+}
+
+static __inline__ __attribute__((always_inline)) unsigned char __readfsbyte(const unsigned long Offset)
+{
+  unsigned char value;
+  __asm__("movb %%fs:%a[Offset], %b[value]" : [value] "=q" (value) : [Offset] "irm" (Offset));
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned short __readfsword(const unsigned long Offset)
+{
+  unsigned short value;
+  __asm__("movw %%fs:%a[Offset], %w[value]" : [value] "=q" (value) : [Offset] "irm" (Offset));
+  return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long long __readfsdword(unsigned long long Offset)
+{
+  unsigned long long value;
+  __asm__("movl %%fs:%a[Offset], %k[value]" : [value] "=q" (value) : [Offset] "irm" (Offset));
+  return value;
+}
+
+#ifdef __SSE3__
+typedef long long __v2di __attribute__ ((__vector_size__ (16)));
+typedef long long __m128i __attribute__ ((__vector_size__ (16), __may_alias__));
+static __inline__ __attribute__((always_inline)) void _mm_stream_si128_fs2 (void *__A, __m128i __B)
+{
+  __asm__(".byte 0x64"); // fs prefix
+  __builtin_ia32_movntdq ((__v2di *)__A, (__v2di)__B);
+}
+
+static __inline__ __attribute__((always_inline)) void _mm_stream_si128_fs (void *__A, void *__B)
+{
+  __m128i data;
+  data = (__m128i) __builtin_ia32_lddqu ((char const *)__B);
+  _mm_stream_si128_fs2 (__A, data);
+}
+#endif
+
+static __inline__ __attribute__((always_inline)) void _mm_clflush_fs (void *__A)
+{
+  __asm__(".byte 0x64"); // fs prefix
+  __builtin_ia32_clflush (__A);
+}
+static __inline __attribute__(( __always_inline__)) void _mm_mfence (void)
+{
+  __builtin_ia32_mfence ();
+}
+static __inline __attribute__(( __always_inline__)) void _mm_sfence (void)
+{
+  __builtin_ia32_sfence ();
+}
+
+static __inline__ __attribute__((always_inline)) void __stosb(unsigned char *dest, unsigned char data, size_t count)
+{
+   __asm__ __volatile__ (
+    "cld ; rep ; stosb "
+    : "=D" (dest), "=c" (count)
+    : "a"(data), "0"(dest), "1" (count)
+  );
+}
+
+static __inline__ __attribute__((always_inline)) void __movsb(unsigned char *dest, unsigned char *data, size_t count)
+{
+   __asm__ __volatile__ (
+    "cld ; rep ; movsb "
+    : "=D" (dest), "=S"(data), "=c" (count)
+    : "S"(data), "0"(dest), "1" (count)
+  );
+}
+
+static __inline__ __attribute__((always_inline))
+void debug_point ( unsigned short Port,  unsigned long Data )
+{
+   __outdword (Port, Data);
+   __asm__ __volatile__ (".word 0xfeeb");
+
+}
+
+static __inline__ __attribute__((always_inline))
+void delay_point ( unsigned short Port, unsigned long Data, unsigned long delayTime )
+{
+  UINTN  Index;
+  Index = 0;
+  __outdword (Port, Data);
+  while (Index < delayTime * 600000) {
+    __outdword (0xE0, 0);
+    Index ++;
+  }
+}
+#endif // defined (__GNUC__)
diff --git a/src/vendorcode/amd/agesa/f15/Legacy/PlatformMemoryConfiguration.inc b/src/vendorcode/amd/agesa/f15/Legacy/PlatformMemoryConfiguration.inc
new file mode 100644
index 0000000000..cf111ac2b7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Legacy/PlatformMemoryConfiguration.inc
@@ -0,0 +1,670 @@
+; ****************************************************************************
+; *
+; * @file
+; *
+; * AMD Platform Specific Memory Configuration
+; *
+; * Contains AMD AGESA Memory Configuration Override Interface
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  Include
+; * @e \$Revision: 22910 $   @e \$Date: 2009-11-27 04:50:20 -0600 (Fri, 27 Nov 2009) $
+;
+; ****************************************************************************
+; *
+; * Copyright (C) 2012 Advanced Micro Devices, Inc.
+; * All rights reserved.
+; *
+; * Redistribution and use in source and binary forms, with or without
+; * modification, are permitted provided that the following conditions are met:
+; *     * Redistributions of source code must retain the above copyright
+; *       notice, this list of conditions and the following disclaimer.
+; *     * Redistributions in binary form must reproduce the above copyright
+; *       notice, this list of conditions and the following disclaimer in the
+; *       documentation and/or other materials provided with the distribution.
+; *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+; *       its contributors may be used to endorse or promote products derived
+; *       from this software without specific prior written permission.
+; *
+; * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; *
+; *
+; **************************************************************************
+IFNDEF PSO_ENTRY
+  PSO_ENTRY           TEXTEQU    <UINT8>; < Platform Configuration Table Entry
+ENDIF
+; *****************************************************************************************
+; *
+; *                 PLATFORM SPECIFIC MEMORY DEFINITIONS
+; *
+; *****************************************************************************************
+; */
+;
+; < Memory Speed and DIMM Population Masks
+;
+; < DDR Speed Masks
+;
+ANY_SPEED     EQU     0FFFFFFFFh
+DDR400        EQU     ( 1 SHL (DDR400_FREQUENCY   / 66))
+DDR533        EQU     ( 1 SHL (DDR533_FREQUENCY   / 66))
+DDR667        EQU     ( 1 SHL (DDR667_FREQUENCY   / 66))
+DDR800        EQU     ( 1 SHL (DDR800_FREQUENCY   / 66))
+DDR1066       EQU     ( 1 SHL (DDR1066_FREQUENCY  / 66))
+DDR1333       EQU     ( 1 SHL (DDR1333_FREQUENCY  / 66))
+DDR1600       EQU     ( 1 SHL (DDR1600_FREQUENCY  / 66))
+DDR1866       EQU     ( 1 SHL (DDR1866_FREQUENCY  / 66))
+DDR2133       EQU     ( 1 SHL (DDR2133_FREQUENCY  / 66))
+DDR2400       EQU     ( 1 SHL (DDR2400_FREQUENCY  / 66))
+; <
+; <  DIMM POPULATION MASKS
+;
+ANY_        EQU      0FFh
+SR_DIMM0    EQU     0001h
+SR_DIMM1    EQU     0010h
+SR_DIMM2    EQU     0100h
+SR_DIMM3    EQU     1000h
+DR_DIMM0    EQU     0002h
+DR_DIMM1    EQU     0020h
+DR_DIMM2    EQU     0200h
+DR_DIMM3    EQU     2000h
+QR_DIMM0    EQU     0004h
+QR_DIMM1    EQU     0040h
+QR_DIMM2    EQU     0400h
+QR_DIMM3    EQU     4000h
+LR_DIMM0    EQU     0001h
+LR_DIMM1    EQU     0010h
+LR_DIMM2    EQU     0100h
+LR_DIMM3    EQU     1000h
+ANY_DIMM0   EQU     000Fh
+ANY_DIMM1   EQU     00F0h
+ANY_DIMM2   EQU     0F00h
+ANY_DIMM3   EQU    0F000h
+; <
+; <  CS POPULATION MASKS
+;
+CS_ANY_     EQU     0FFh
+CS0_        EQU      01h
+CS1_        EQU      02h
+CS2_        EQU      04h
+CS3_        EQU      08h
+CS4_        EQU      10h
+CS5_        EQU      20h
+CS6_        EQU      40h
+CS7_        EQU      80h
+;
+;  Number of Dimms
+;
+ANY_NUM      EQU    0FFh
+NO_DIMM      EQU     00h
+ONE_DIMM     EQU     01h
+TWO_DIMM     EQU     02h
+THREE_DIMM   EQU     04h
+FOUR_DIMM    EQU     08h
+;
+;  DIMM VOLTAGE MASK
+;
+VOLT_ANY_    EQU    0FFh
+VOLT1_5_     EQU     01h
+VOLT1_35_    EQU     02h
+VOLT1_25_    EQU     04h
+;
+;  NOT APPLICIABLE
+;
+NA_          EQU     00h
+; *****************************************************************************************
+; *
+; * Platform Specific Override Definitions for Socket, Channel and Dimm
+; * This indicates where a platform override will be applied.
+; *
+; *****************************************************************************************
+;
+;  SOCKET MASKS
+;
+ANY_SOCKET      EQU    0FFh
+SOCKET0         EQU     01h
+SOCKET1         EQU     02h
+SOCKET2         EQU     04h
+SOCKET3         EQU     08h
+SOCKET4         EQU     10h
+SOCKET5         EQU     20h
+SOCKET6         EQU     40h
+SOCKET7         EQU     80h
+;
+;  CHANNEL MASKS
+;
+ANY_CHANNEL     EQU    0FFh
+CHANNEL_A       EQU     01h
+CHANNEL_B       EQU     02h
+CHANNEL_C       EQU     04h
+CHANNEL_D       EQU     08h
+;
+;  DIMM MASKS
+;
+ALL_DIMMS       EQU    0FFh
+DIMM0           EQU     01h
+DIMM1           EQU     02h
+DIMM2           EQU     04h
+DIMM3           EQU     08h
+;
+;  REGISTER ACCESS MASKS
+;
+ACCESS_NB0      EQU      0h
+ACCESS_NB1      EQU     01h
+ACCESS_NB2      EQU     02h
+ACCESS_NB3      EQU     03h
+ACCESS_NB4      EQU     04h
+ACCESS_PHY      EQU     05h
+ACCESS_DCT_XT   EQU     06h
+; *****************************************************************************************
+; *
+; * Platform Specific Overriding Table Definitions
+; *
+; *****************************************************************************************
+PSO_END                EQU      0     ; < Table End
+PSO_CKE_TRI            EQU      1     ; < CKE Tristate Map
+PSO_ODT_TRI            EQU      2     ; < ODT Tristate Map
+PSO_CS_TRI             EQU      3     ; < CS Tristate Map
+PSO_MAX_DIMMS          EQU      4     ; < Max Dimms per channel
+PSO_CLK_SPEED          EQU      5     ; < Clock Speed
+PSO_DIMM_TYPE          EQU      6     ; < Dimm Type
+PSO_MEMCLK_DIS         EQU      7     ; < MEMCLK Disable Map
+PSO_MAX_CHNLS          EQU      8     ; < Max Channels per Socket
+PSO_BUS_SPEED          EQU      9     ; < Max Memory Bus Speed
+PSO_MAX_CHIPSELS       EQU     10     ; < Max Chipsel per Channel
+PSO_MEM_TECH           EQU     11     ; < Channel Memory Type
+PSO_WL_SEED            EQU     12     ; < DDR3 Write Levelization Seed delay
+PSO_RXEN_SEED          EQU     13     ; < Hardwared based RxEn seed
+PSO_NO_LRDIMM_CS67_ROUTING          EQU    14     ; < CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs
+PSO_SOLDERED_DOWN_SODIMM_TYPE       EQU    15     ; < Soldered down SODIMM type
+PSO_LVDIMM_VOLT1_5_SUPPORT          EQU    16     ; < Force LvDimm voltage to 1.5V
+PSO_MIN_RD_WR_DATAEYE_WIDTH         EQU    17     ; < Min RD/WR dataeye width
+PSO_CPU_FAMILY_TO_OVERRIDE          EQU    18     ; < CPU family signature to tell following PSO macros are CPU family dependent
+; **********************************
+; * CONDITIONAL PSO SPECIFIC ENTRIES
+; **********************************
+;  Condition Types
+CONDITIONAL_PSO_MIN   EQU     100     ; < Start of Conditional Entry Types
+PSO_CONDITION_AND     EQU     100     ; < And Block - Start of Conditional block
+PSO_CONDITION_LOC     EQU     101     ; < Location - Specify Socket, Channel, Dimms to be affected
+PSO_CONDITION_SPD     EQU     102     ; < SPD - Specify a specific SPD value on a Dimm on the channel
+PSO_CONDITION_REG     EQU     103     ;    Reserved
+PSO_CONDITION_MAX     EQU     103     ; < End Of Condition Entry Types
+;  Action Types
+PSO_ACTION_MIN        EQU     120     ; < Start of Action Entry Types
+PSO_ACTION_ODT        EQU     120     ; < ODT values to override
+PSO_ACTION_ADDRTMG    EQU     121     ; < Address/Timing values to override
+PSO_ACTION_ODCCONTROL EQU     122     ; < ODC Control values to override
+PSO_ACTION_SLEWRATE   EQU     123     ; < Slew Rate value to override
+PSO_ACTION_REG        EQU     124     ;    Reserved
+PSO_ACTION_SPEEDLIMIT EQU     125     ; < Memory Bus speed Limit based on configuration
+PSO_ACTION_MAX        EQU     125     ; < End of Action Entry Types
+CONDITIONAL_PSO_MAX   EQU     139     ; < End of Conditional Entry Types
+; **********************************
+; * TABLE DRIVEN PSO SPECIFIC ENTRIES
+; **********************************
+;  Condition descriptor
+PSO_TBLDRV_CONFIG       EQU     200     ; < Configuration Descriptor
+
+;  Overriding entry types
+PSO_TBLDRV_START        EQU     210     ; < Start of Table Driven Overriding Entry Types
+PSO_TBLDRV_SPEEDLIMIT   EQU     210     ; < Speed Limit
+PSO_TBLDRV_ODT_RTTNOM   EQU     211     ; < RttNom
+PSO_TBLDRV_ODT_RTTWR    EQU     212     ; < RttWr
+PSO_TBLDRV_ODTPATTERN   EQU     213     ; < Odt Patterns
+PSO_TBLDRV_ADDRTMG      EQU     214     ; < Address/Timing values
+PSO_TBLDRV_ODCCTRL      EQU     215     ; < ODC Control values
+PSO_TBLDRV_SLOWACCMODE  EQU     216     ; < Slow Access Mode
+PSO_TBLDRV_MR0_CL       EQU     217     ; < MR0[CL]
+PSO_TBLDRV_MR0_WR       EQU     218     ; < MR0[WR]
+PSO_TBLDRV_RC2_IBT      EQU     219     ; < RC2[IBT]
+PSO_TBLDRV_RC10_OPSPEED EQU     220     ; < RC10[Opearting Speed]
+PSO_TBLDRV_LRDIMM_IBT   EQU     221     ; < LrDIMM IBT
+PSO_TBLDRV____TRAINING   EQU     222    ; < training
+PSO_TBLDRV_INVALID_TYPE EQU     223     ; < Invalid Type
+PSO_TBLDRV_END          EQU     223     ; < End of Table Driven Overriding Entry Types
+
+
+; *****************************************************************************************
+; *
+; *                 CONDITIONAL OVERRIDE TABLE MACROS
+; *
+; *****************************************************************************************
+CPU_FAMILY_TO_OVERRIDE     MACRO     CpuFamilyRevision:REQ
+ DB PSO_CPU_FAMILY_TO_OVERRIDE
+ DB 4
+ DD CpuFamilyRevision
+ENDM
+
+MEMCLK_DIS_MAP    MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ
+ DB PSO_MEMCLK_DIS
+ DB 11
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB Bit0Map
+ DB Bit1Map
+ DB Bit2Map
+ DB Bit3Map
+ DB Bit4Map
+ DB Bit5Map
+ DB Bit6Map
+ DB Bit7Map
+ENDM
+
+CKE_TRI_MAP     MACRO     SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ
+ DB PSO_CKE_TRI
+ DB 5
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB Bit0Map
+ DB Bit1Map
+ENDM
+
+ODT_TRI_MAP     MACRO     SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ
+ DB PSO_ODT_TRI
+ DB 7
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB Bit0Map
+ DB Bit1Map
+ DB Bit2Map
+ DB Bit3Map
+ENDM
+
+CS_TRI_MAP     MACRO     SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ
+ DB PSO_CS_TRI
+ DB 11
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB Bit0Map
+ DB Bit1Map
+ DB Bit2Map
+ DB Bit3Map
+ DB Bit4Map
+ DB Bit5Map
+ DB Bit6Map
+ DB Bit7Map
+ENDM
+
+NUMBER_OF_DIMMS_SUPPORTED     MACRO     SocketID:REQ, ChannelID:REQ, NumberOfDimmSlotsPerChannel:REQ
+ DB PSO_MAX_DIMMS
+ DB 4
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB NumberOfDimmSlotsPerChannel
+ENDM
+
+NUMBER_OF_CHIP_SELECTS_SUPPORTED     MACRO     SocketID:REQ, ChannelID:REQ, NumberOfChipSelectsPerChannel:REQ
+ DB PSO_MAX_CHIPSELS
+ DB 4
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB NumberOfChipSelectsPerChannel
+ENDM
+
+NUMBER_OF_CHANNELS_SUPPORTED     MACRO     SocketID:REQ, NumberOfChannelsPerSocket:REQ
+ DB PSO_MAX_CHNLS
+ DB 4
+ DB SocketID
+ DB ANY_CHANNEL
+ DB ALL_DIMMS
+ DB NumberOfChannelsPerSocket
+ENDM
+
+OVERRIDE_DDR_BUS_SPEED     MACRO     SocketID:REQ, ChannelID:REQ, TimingMode:REQ, BusSpeed:REQ
+ PSO_BUS_SPEED
+ DB 11
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DD TimingMode
+ DD BusSpeed
+ENDM
+
+DRAM_TECHNOLOGY           MACRO SocketID:REQ, MemTechType:REQ
+ DB PSO_MEM_TECH
+ DB 7
+ DB SocketID
+ DB ANY_CHANNEL
+ DB ALL_DIMMS
+ DD MemTechType
+ENDM
+
+WRITE_LEVELING_SEED     MACRO SocketID:REQ, ChannelID:REQ, DimmID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \
+Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ
+ DB PSO_WL_SEED
+ DB 12
+ DB SocketID
+ DB ChannelID
+ DB DimmID
+ DB Byte0Seed
+ DB Byte1Seed
+ DB Byte2Seed
+ DB Byte3Seed
+ DB Byte4Seed
+ DB Byte5Seed
+ DB Byte6Seed
+ DB Byte7Seed
+ DB ByteEccSeed
+ENDM
+
+HW_RXEN_SEED     MACRO SocketID:REQ, ChannelID:REQ, DimmID: REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \
+Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ
+  DB PSO_RXEN_SEED
+  DB 21
+  DB SocketID
+  DB ChannelID
+  DB DimmID
+  DW Byte0Seed
+  DW Byte1Seed
+  DW Byte2Seed
+  DW Byte3Seed
+  DW Byte4Seed
+  DW Byte5Seed
+  DW Byte6Seed
+  DW Byte7Seed
+  DW ByteEccSeed
+ENDM
+
+NO_LRDIMM_CS67_ROUTING     MACRO SocketID:REQ, ChannelID:REQ
+  DB PSO_NO_LRDIMM_CS67_ROUTING
+  DB 4
+  DB SocketID
+  DB ChannelID
+  DB ALL_DIMMS
+  DB 1
+ENDM
+
+SOLDERED_DOWN_SODIMM_TYPE     MACRO SocketID:REQ, ChannelID:REQ
+  DB PSO_SOLDERED_DOWN_SODIMM_TYPE
+  DB 4
+  DB SocketID
+  DB ChannelID
+  DB ALL_DIMMS
+  DB 1
+ENDM
+
+LVDIMM_FORCE_VOLT1_5_FOR_D0    MACRO
+ DB PSO_LVDIMM_VOLT1_5_SUPPORT
+ DB 4
+ DB ANY_SOCKET
+ DB ANY_CHANNEL
+ DB ALL_DIMMS
+ DB 1
+ENDM
+
+MIN_RD_WR_DATAEYE_WIDTH        MACRO     SocketID:REQ, ChannelID:REQ, MinRdDataeyeWidth:REQ, MinWrDataeyeWidth:REQ
+  DB PSO_MIN_RD_WR_DATAEYE_WIDTH
+  DB 5
+  DB SocketID
+  DB ChannelID
+  DB ALL_DIMMS
+  DB MinRdDataeyeWidth
+  DB MinWrDataeyeWidth
+ENDM
+
+; *****************************************************************************************
+; *
+; *                 CONDITIONAL OVERRIDE TABLE MACROS
+; *
+; *****************************************************************************************
+CONDITION_AND      MACRO
+ DB PSO_CONDITION_AND
+ DB 0
+ENDM
+
+COND_LOC     MACRO     SocketMsk:REQ, ChannelMsk:REQ, DimmMsk:REQ
+ DB PSO_CONDITION_LOC
+ DB 3
+ DB SocketMsk
+ DB ChannelMsk
+ DB DimmMsk
+ENDM
+
+COND_SPD     MACRO     Byte:REQ, Mask:REQ, Value:REQ
+ DB PSO_CONDITION_SPD
+ DB 3
+ DB Byte
+ DB Mask
+ DB Value
+ENDM
+
+COND_REG     MACRO     Access:REQ, Offset:REQ, Mask:REQ, Value:REQ
+ DB PSO_CONDITION_REG
+ DB 11
+ DB Access
+ DW Offset
+ DD Mask
+ DD Value
+ENDM
+
+ACTION_ODT     MACRO     Frequency:REQ, Dimms:REQ, QrDimms:REQ, DramOdt:REQ, QrDramOdt:REQ, DramDynOdt:REQ
+ DB PSO_ACTION_ODT
+ DB 9
+ DD Frequency
+ DB Dimms
+ DB QrDimms
+ DB DramOdt
+ DB QrDramOdt
+ DB DramDynOdt
+ENDM
+
+ACTION_ADDRTMG     MACRO     Frequency:REQ, DimmConfig:REQ, AddrTmg:REQ
+ DB PSO_ACTION_ADDRTMG
+ DB 10
+ DD Frequency
+ DW DimmConfig
+ DD AddrTmg
+ENDM
+
+ACTION_ODCCTRL     MACRO     Frequency:REQ, DimmConfig:REQ, OdcCtrl:REQ
+ DB PSO_ACTION_ODCCONTROL
+ DB 10
+ DD Frequency
+ DW DimmConfig
+ DD OdcCtrl
+ENDM
+
+ACTION_SLEWRATE     MACRO     Frequency:REQ, DimmConfig:REQ, SlewRate:REQ
+ DB PSO_ACTION_SLEWRATE
+ DB 10
+ DD Frequency
+ DW DimmConfig
+ DD SlewRate
+ENDM
+
+ACTION_SPEEDLIMIT     MACRO     DimmConfig:REQ, Dimms:REQ, SpeedLimit15:REQ, SpeedLimit135:REQ, SpeedLimit125:REQ
+ DB PSO_ACTION_SPEEDLIMIT
+ DB 9
+ DW DimmConfig
+ DB Dimms
+ DW SpeedLimit15
+ DW SpeedLimit135
+ DW SpeedLimit125
+ENDM
+
+; *****************************************************************************************
+; *
+; *                 END OF CONDITIONAL OVERRIDE TABLE MACROS
+; *
+; *****************************************************************************************
+; *****************************************************************************************
+; *
+; *                 TABLE DRIVEN OVERRIDE  MACROS
+; *
+; *****************************************************************************************
+; Configuration sub-descriptors
+CONFIG_GENERAL        EQU   0
+CONFIG_SPEEDLIMIT     EQU   1
+CONFIG_RC2IBT         EQU   2
+CONFIG_DONT_CARE      EQU   3
+Config_Type  TEXTEQU  <DWORD>
+;
+; Configuration Macros
+;
+TBLDRV_CONFIG_TO_OVERRIDE     MACRO     DimmPerCH:REQ, Frequency:REQ, DimmVolt:REQ, DimmConfig:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 9
+ DB CONFIG_GENERAL
+ DB DimmPerCH
+ DB DimmVolt
+ DD Frequency
+ DW DimmConfig
+ENDM
+
+TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE     MACRO     DimmPerCH:REQ, Dimms:REQ, NumOfSR:REQ, NumOfDR:REQ, NumOfQR:REQ,  NumOfLRDimm:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 7
+ DB CONFIG_SPEEDLIMIT
+ DB DimmPerCH
+ DB Dimms
+ DB NumOfSR
+ DB NumOfDR
+ DB NumOfQR
+ DB NumOfLRDimm
+ENDM
+
+TBLDRV_RC2IBT_CONFIG_TO_OVERRIDE     MACRO     DimmPerCH:REQ, Frequency:REQ, DimmVolt:REQ, DimmConfig:REQ, NumOfReg:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 10
+ DB CONFIG_RC2IBT
+ DB DimmPerCH
+ DB DimmVolt
+ DD Frequency
+ DW DimmConfig
+ DB NumOfReg
+ENDM
+;
+; Overriding Macros
+;
+TBLDRV_CONFIG_ENTRY_SPEEDLIMIT     MACRO     SpeedLimit1_5:REQ, SpeedLimit1_35:REQ, SpeedLimit1_25:REQ
+ DB PSO_TBLDRV_SPEEDLIMIT
+ DB 6
+ DW SpeedLimit1_5
+ DW SpeedLimit1_35
+ DW SpeedLimit1_25
+ENDM
+
+TBLDRV_CONFIG_ENTRY_ODT_RTTNOM     MACRO     TgtCS:REQ, RttNom:REQ
+ DB PSO_TBLDRV_ODT_RTTNOM
+ DB 2
+ DB TgtCS
+ DB RttNom
+ENDM
+
+TBLDRV_CONFIG_ENTRY_ODT_RTTWR     MACRO     TgtCS:REQ, RttWr:REQ
+ DB PSO_TBLDRV_ODT_RTTWR
+ DB 2
+ DB TgtCS
+ DB RttWr
+ENDM
+
+TBLDRV_CONFIG_ENTRY_ODTPATTERN     MACRO     RdODTCSHigh:REQ, RdODTCSLow:REQ, WrODTCSHigh:REQ, WrODTCSLow:REQ
+ DB PSO_TBLDRV_ODTPATTERN
+ DB 16
+ DD RdODTCSHigh
+ DD RdODTCSLow
+ DD WrODTCSHigh
+ DD WrODTCSLow
+ENDM
+
+TBLDRV_CONFIG_ENTRY_ADDRTMG     MACRO     AddrTmg:REQ
+ DB PSO_TBLDRV_ADDRTMG
+ DB 4
+ DD AddrTmg
+ENDM
+
+TBLDRV_CONFIG_ENTRY_ODCCTRL     MACRO     OdcCtrl:REQ
+ DB PSO_TBLDRV_ODCCTRL
+ DB 4
+ DD OdcCtrl
+ENDM
+
+TBLDRV_CONFIG_ENTRY_SLOWACCMODE     MACRO     SlowAccMode:REQ
+ DB PSO_TBLDRV_SLOWACCMODE
+ DB 1
+ DB SlowAccMode
+ENDM
+
+TBLDRV_CONFIG_ENTRY_RC2_IBT     MACRO     TgtDimm:REQ, IBT:REQ
+ DB PSO_TBLDRV_RC2_IBT
+ DB 2
+ DB TgtDimm
+ DB IBT
+ENDM
+
+TBLDRV_OVERRIDE_MR0_CL     MACRO     RegValOfTcl:REQ, MR0CL13:REQ, MR0CL0:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 1
+ DB CONFIG_DONT_CARE
+ DB PSO_TBLDRV_MR0_CL
+ DB 3
+ DB RegValOfTcl
+ DB MR0CL13
+ DB MR0CL0
+ENDM
+
+TBLDRV_OVERRIDE_MR0_WR     MACRO     RegValOfTwr:REQ, MR0WR:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 1
+ DB CONFIG_DONT_CARE
+ DB PSO_TBLDRV_MR0_WR
+ DB 2
+ DB RegValOfTcl
+ DB MR0WR
+ENDM
+
+TBLDRV_OVERRIDE_RC10_OPSPEED     MACRO     Frequency:REQ, MR10OPSPEED:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 1
+ DB CONFIG_DONT_CARE
+ DB PSO_TBLDRV_RC10_OPSPEED
+ DB 5
+ DD Frequency
+ DB MR10OPSPEED
+ENDM
+
+TBLDRV_CONFIG_ENTRY_LRDMM_IBT     MACRO     F0RC8:REQ, F1RC0:REQ, F1RC1:REQ, F1RC2:REQ
+ DB PSO_TBLDRV_LRDIMM_IBT
+ DB 4
+ DB F0RC8
+ DB F1RC0
+ DB F1RC1
+ DB F1RC2
+ENDM
+
+TBLDRV_CONFIG_ENTRY____TRAINING     MACRO     Training__Mode:REQ
+ DB PSO_TBLDRV____TRAINING
+ DB 1
+ DB Training__Mode
+ENDM
+
+;
+; Macros for removing entries
+;
+INVALID_CONFIG_FLAG   EQU   8000h
+
+TBLDRV_INVALID_CONFIG     MACRO
+ DB PSO_TBLDRV_INVALID_TYPE
+ DB 0
+ENDM
+; *****************************************************************************************
+; *
+; *                 END OF TABLE DRIVEN OVERRIDE  MACROS
+; *
+; *****************************************************************************************
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Legacy/Proc/Dispatcher.c b/src/vendorcode/amd/agesa/f15/Legacy/Proc/Dispatcher.c
new file mode 100644
index 0000000000..7ad4bb9437
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Legacy/Proc/Dispatcher.c
@@ -0,0 +1,159 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD binary block interface
+ *
+ * Contains the block entry function dispatcher
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Legacy
+ * @e \$Revision: 56322 $   @e \$Date: 2011-07-11 16:51:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                            M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Dispatcher.h"
+#include "Options.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE LEGACY_PROC_DISPATCHER_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST DISPATCH_TABLE DispatchTable[];
+extern AMD_MODULE_HEADER mCpuModuleID;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * The Dispatcher is the entry point into the AGESA software. It takes a function
+ * number as entry parameter in order to invoke the published function
+ *
+ * @param[in,out]  ConfigPtr
+ *
+ * @return   AGESA Status.
+ *
+ */
+AGESA_STATUS
+CALLCONV
+AmdAgesaDispatcher (
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  AGESA_STATUS Status;
+  IMAGE_ENTRY ImageEntry;
+  MODULE_ENTRY  ModuleEntry;
+  DISPATCH_TABLE *Entry;
+  UINT32 ImageStart;
+  UINT32 ImageEnd;
+  AMD_IMAGE_HEADER* AltImagePtr;
+
+  Status = AGESA_UNSUPPORTED;
+  ImageEntry = NULL;
+  ModuleEntry = NULL;
+  ImageStart = 0xFFF00000;
+  ImageEnd = 0xFFFFFFFF;
+  AltImagePtr = NULL;
+
+  Entry = (DISPATCH_TABLE *) DispatchTable;
+  while (Entry->FunctionId != 0) {
+    if ((((AMD_CONFIG_PARAMS *) ConfigPtr)->Func) == Entry->FunctionId) {
+      Status = Entry->EntryPoint (ConfigPtr);
+      break;
+    }
+    Entry++;
+  }
+
+  // 2. Try next dispatcher if possible, and we have not already got status back
+  if ((mCpuModuleID.NextBlock != NULL) && (Status == AGESA_UNSUPPORTED)) {
+    ModuleEntry = (MODULE_ENTRY) (UINT64) mCpuModuleID.NextBlock->ModuleDispatcher;
+    if (ModuleEntry != NULL) {
+      Status = (*ModuleEntry) (ConfigPtr);
+    }
+  }
+
+  // 3. If not this image specific function, see if we can find alternative image instead
+  if (Status == AGESA_UNSUPPORTED) {
+    if ((((AMD_CONFIG_PARAMS *)ConfigPtr)->AltImageBasePtr != 0xFFFFFFFF  ) || (((AMD_CONFIG_PARAMS *)ConfigPtr)->AltImageBasePtr != 0)) {
+      ImageStart = ((AMD_CONFIG_PARAMS *)ConfigPtr)->AltImageBasePtr;
+      ImageEnd = ImageStart + 4;
+      // Locate/test image base that matches this component
+      AltImagePtr = LibAmdLocateImage ((VOID *) (UINT64)ImageStart, (VOID *) (UINT64)ImageEnd, 4096, (CHAR8 *) AGESA_ID);
+      if (AltImagePtr != NULL) {
+        //Invoke alternative Image
+        ImageEntry = (IMAGE_ENTRY) ((UINT64) AltImagePtr + AltImagePtr->EntryPointAddress);
+        Status = (*ImageEntry) (ConfigPtr);
+      }
+    }
+  }
+
+  return (Status);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * The host environment interface of callout.
+ *
+ * @param[in]      Func
+ * @param[in]      Data
+ * @param[in,out]  ConfigPtr
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+CALLCONV
+AmdAgesaCallout (
+  IN       UINT32  Func,
+  IN       UINT32  Data,
+  IN OUT   VOID    *ConfigPtr
+  )
+{
+  UINT32 Result;
+  Result = AGESA_UNSUPPORTED;
+  if (((AMD_CONFIG_PARAMS *) ConfigPtr)->CalloutPtr == NULL) {
+    return Result;
+  }
+
+  Result = (((AMD_CONFIG_PARAMS *) ConfigPtr)->CalloutPtr) (Func, Data, ConfigPtr);
+  return (Result);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Legacy/Proc/agesaCallouts.c b/src/vendorcode/amd/agesa/f15/Legacy/Proc/agesaCallouts.c
new file mode 100644
index 0000000000..1af03b9c64
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Legacy/Proc/agesaCallouts.c
@@ -0,0 +1,441 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU AGESA Callout Functions
+ *
+ * Contains code to set / get useful platform information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Common
+ * @e \$Revision: 50871 $   @e \$Date: 2011-04-14 15:39:51 -0600 (Thu, 14 Apr 2011) $
+ *
+ */
+/*****************************************************************************
+ * AMD Generic Encapsulated Software Architecture
+ *
+ * Description: agesaCallouts.c - AGESA Call out functions
+ *
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                            M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Dispatcher.h"
+#include "cpuServices.h"
+#include "Ids.h"
+#include "Filecode.h"
+
+#define FILECODE LEGACY_PROC_AGESACALLOUTS_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S - (AGESA ONLY)
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Call the host environment interface to do the warm or cold reset.
+ *
+ *  @param[in]      ResetType       Warm or Cold Reset is requested
+ *  @param[in,out]  StdHeader       Config header
+ *
+ */
+VOID
+AgesaDoReset (
+  IN       UINTN             ResetType,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  AGESA_STATUS Status;
+  WARM_RESET_REQUEST Request;
+
+  // Clear warm request bit and set state bits to the current post stage
+  GetWarmResetFlag (StdHeader, &Request);
+  Request.RequestBit = FALSE;
+  Request.StateBits = Request.PostStage;
+  SetWarmResetFlag (StdHeader, &Request);
+
+  Status =  AmdAgesaCallout (AGESA_DO_RESET, (UINT32)ResetType, (VOID *) StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Call the host environment interface to allocate buffer in main system memory.
+ *
+ * @param[in]      FcnData
+ * @param[in,out]  AllocParams  Heap manager parameters
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaAllocateBuffer (
+  IN       UINTN               FcnData,
+  IN OUT   AGESA_BUFFER_PARAMS *AllocParams
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_ALLOCATE_BUFFER, (UINT32)FcnData, (VOID *) AllocParams);
+
+  return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to deallocate buffer in main system memory.
+ *
+ * @param[in]      FcnData
+ * @param[in,out]  DeallocParams   Heap Manager parameters
+ *
+ * @return   The AGESA Status returned from the callout.
+ */
+AGESA_STATUS
+AgesaDeallocateBuffer (
+  IN       UINTN                 FcnData,
+  IN OUT   AGESA_BUFFER_PARAMS  *DeallocParams
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_DEALLOCATE_BUFFER, (UINT32)FcnData, (VOID *) DeallocParams);
+
+  return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Call the host environment interface to Locate buffer Pointer in main system memory
+ *
+ * @param[in]      FcnData
+ * @param[in,out]  LocateParams   Heap manager parameters
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaLocateBuffer (
+  IN       UINTN                 FcnData,
+  IN OUT   AGESA_BUFFER_PARAMS  *LocateParams
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_LOCATE_BUFFER, (UINT32)FcnData, (VOID *) LocateParams);
+
+  return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to launch APs
+ *
+ * @param[in]      ApicIdOfCore
+ * @param[in,out]  LaunchApParams
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaRunFcnOnAp (
+  IN        UINTN         ApicIdOfCore,
+  IN        AP_EXE_PARAMS *LaunchApParams
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_RUNFUNC_ONAP, (UINT32)ApicIdOfCore, (VOID *) LaunchApParams);
+
+  return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to read an SPD's content.
+ *
+ * @param[in]      FcnData
+ * @param[in,out]  ReadSpd
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaReadSpd (
+  IN       UINTN                 FcnData,
+  IN OUT   AGESA_READ_SPD_PARAMS *ReadSpd
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_READ_SPD, (UINT32)FcnData, ReadSpd);
+
+  return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to read an SPD's content.
+ *
+ * @param[in]      FcnData
+ * @param[in,out]  ReadSpd
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaReadSpdRecovery (
+  IN       UINTN                 FcnData,
+  IN OUT   AGESA_READ_SPD_PARAMS *ReadSpd
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_READ_SPD_RECOVERY, (UINT32)FcnData, ReadSpd);
+
+  return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to provide a user hook opportunity.
+ *
+ * @param[in]      FcnData
+ * @param[in,out]  MemData
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaHookBeforeDramInitRecovery (
+  IN       UINTN           FcnData,
+  IN OUT   MEM_DATA_STRUCT *MemData
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, (UINT32)FcnData, MemData);
+
+  return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to provide a user hook opportunity.
+ *
+ * @param[in]      SocketIdModuleId - (SocketID << 8) | ModuleId
+ * @param[in,out]  MemData
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaHookBeforeDramInit (
+  IN       UINTN           SocketIdModuleId,
+  IN OUT   MEM_DATA_STRUCT *MemData
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_HOOKBEFORE_DRAM_INIT, (UINT32)SocketIdModuleId, MemData);
+
+  return Status;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Call the host environment interface to provide a user hook opportunity.
+ *
+ *  @param[in]      SocketIdModuleId - (SocketID << 8) | ModuleId
+ *  @param[in,out]  MemData
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaHookBeforeDQSTraining (
+  IN       UINTN           SocketIdModuleId,
+  IN OUT   MEM_DATA_STRUCT *MemData
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_HOOKBEFORE_DQS_TRAINING, (UINT32)SocketIdModuleId, MemData);
+
+  return Status;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Call the host environment interface to provide a user hook opportunity.
+ *
+ *  @param[in]      FcnData
+ *  @param[in,out]  MemData
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaHookBeforeExitSelfRefresh (
+  IN       UINTN           FcnData,
+  IN OUT   MEM_DATA_STRUCT *MemData
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_HOOKBEFORE_EXIT_SELF_REF, (UINT32)FcnData, MemData);
+
+  return Status;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to provide a user hook opportunity.
+ *
+ * @param[in]      Data
+ * @param[in,out]  IdsCalloutData
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+
+
+AGESA_STATUS
+AgesaGetIdsData  (
+  IN       UINTN              Data,
+  IN OUT   IDS_CALLOUT_STRUCT *IdsCalloutData
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_GET_IDS_INIT_DATA, (UINT32)Data, IdsCalloutData);
+
+  return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCIE slot reset control
+ *
+ *
+ *
+ * @param[in]  FcnData              Function data
+ * @param[in]  ResetInfo            Reset information
+ * @retval     Status               Agesa status
+ */
+
+AGESA_STATUS
+AgesaPcieSlotResetControl (
+  IN      UINTN                 FcnData,
+  IN      PCIe_SLOT_RESET_INFO  *ResetInfo
+  )
+{
+  AGESA_STATUS Status;
+  Status = AmdAgesaCallout (AGESA_GNB_PCIE_SLOT_RESET, (UINT32) FcnData, ResetInfo);
+  return  Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * OEM callout function for FCH data override
+ *
+ *
+ * @param[in]  FchData              FCH data pointer
+ * @retval     Status               This feature is not supported
+ */
+
+AGESA_STATUS
+AgesaFchOemCallout (
+  IN      VOID              *FchData
+  )
+{
+  return AGESA_UNSUPPORTED;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Optional call to the host environment interface to change the external Vref for training.
+ *
+ * @param[in]      SocketIdModuleId - (SocketID << 8) | ModuleId
+ * @param[in,out]  MemData
+ *
+ * @return   The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaExternal__TrainVrefChange (
+  IN       UINTN           SocketIdModuleId,
+  IN OUT   MEM_DATA_STRUCT *MemData
+  )
+{
+  AGESA_STATUS Status;
+
+  Status =  AmdAgesaCallout (AGESA_EXTERNAL____TRAIN_VREF_CHANGE, (UINT32)SocketIdModuleId, MemData);
+
+  return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Legacy/Proc/arch2008.asm b/src/vendorcode/amd/agesa/f15/Legacy/Proc/arch2008.asm
new file mode 100644
index 0000000000..fcc18bf278
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Legacy/Proc/arch2008.asm
@@ -0,0 +1,2676 @@
+;*****************************************************************************
+; AMD Generic Encapsulated Software Architecture
+;
+;  Workfile: arch2008.asm     $Revision: 50871 $    $Date: 2011-04-14 15:39:51 -0600 (Thu, 14 Apr 2011) $
+;
+; Description: ARCH2008.ASM - AGESA Architecture 2008 Wrapper Template
+;
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+
+    .XLIST
+    INCLUDE agesa.inc
+    INCLUDE acwrapg.inc       ; Necessary support file as part of wrapper, including but not limited to segment start/end macros.
+    INCLUDE acwrap.inc        ; IBVs may specify host BIOS-specific include files required when building.
+    INCLUDE cpcarmac.inc
+    INCLUDE bridge32.inc
+    .LIST
+    .586p
+    .mmx
+
+
+;----------------------------------------------------------------------------
+; Local definitions
+;----------------------------------------------------------------------------
+
+sOemCallout STRUCT
+    FuncName   DD   ?         ; Call out function name
+    FuncPtr    DW   ?         ; Call out function pointer
+sOemCallout ENDS
+
+sOemEventHandler STRUCT
+    ClassCode  DD   ?         ; AGESA event log sub-class code
+    FuncPtr    DW   ?         ; Event handler function pointer
+sOemEventHandler ENDS
+
+;; A typical legacy BIOS implementation may require the E000 and F000 segments
+;; to be cached.
+EXE_CACHE_REGION_BASE_0  EQU  0E0000h
+EXE_CACHE_REGION_SIZE_0  EQU  20000h
+
+;; In this sample implementation, the B1 and B2 images are placed next to each
+;; other in the BIOS ROM to help with the maximization of cached code.
+EXE_CACHE_REGION_BASE_1  EQU  AGESA_B1_ADDRESS
+EXE_CACHE_REGION_SIZE_1  EQU  40000h
+
+;; The third region is not needed in our example.
+EXE_CACHE_REGION_BASE_2  EQU  0
+EXE_CACHE_REGION_SIZE_2  EQU  0
+
+
+;----------------------------------------------------------------------------
+;    PERSISTENT SEGMENT
+; This segment is required to be present throughout all BIOS execution.
+;----------------------------------------------------------------------------
+
+AMD_PERSISTENT_START
+
+
+;----------------------------------------------------------------------------
+; Instantiate the global descriptor table
+;----------------------------------------------------------------------------
+
+AMD_BRIDGE_32_GDT AMD_GDT         ; Instantiate the global descriptor table
+                                  ; required by the push-high mechanism.
+
+
+;----------------------------------------------------------------------------
+; Declare the external routines required in the persistent segment
+;----------------------------------------------------------------------------
+
+;+-------------------------------------------------------------------------
+;
+;   AmdDfltRet
+;
+;   Entry:
+;     None
+;
+;   Exit:
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     Near stub procedure.  Simply perform a retn instruction.
+;
+EXTERN AmdDfltRet:NEAR
+
+
+;+-------------------------------------------------------------------------
+;
+;   AmdDfltRetFar
+;
+;   Entry:
+;     None
+;
+;   Exit:
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     Far stub procedure.  Simply perform a retf instruction.
+;
+EXTERN AmdDfltRetFar:FAR
+
+
+;----------------------------------------------------------------------------
+; Declare the optional external routines in the persistent segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+;   myModuleTypeMismatchHandler (Example)
+;
+;   Entry:
+;     ESI - Pointer to the EVENT_PARAMS structure of the failure.
+;     [ESI].DataParam1 - Socket
+;     [ESI].DataParam2 - DCT
+;     [ESI].DataParam3 - Channel
+;     [ESI].DataParam4 - 0x00000000
+;
+;   Exit:
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     This procedure can be used to react to a memory module type
+;     mismatch error discovered by the AGESA code.  Actions taken
+;     may include, but are not limited to:
+;       Logging the event to NV for display later
+;       Reset, excluding the mismatch on subsequent reboot
+;       Do nothing
+;
+;   Dependencies:
+;     None
+;
+EXTERN myModuleTypeMismatchHandler(AmdDfltRet):NEAR
+
+;+---------------------------------------------------------------------------
+;
+;   oemPlatformConfigInit (Optional)
+;
+;   Entry:
+;     EDI - 32-bit flat pointer to the PLATFORM_CONFIGURATION to be
+;           passed in to the next AGESA entry point.
+;
+;           typedef struct {
+;             IN PERFORMANCE_PROFILE PlatformProfile;
+;             IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList;
+;             IN UINT8               CoreLevelingMode;
+;             IN PLATFORM_C1E_MODES  C1eMode;
+;             IN UINT32              C1ePlatformData;
+;             IN UINT32              C1ePlatformData1;
+;             IN UINT32              C1ePlatformData2;
+;             IN UINT32              C1ePlatformData3;
+;             IN BOOLEAN             UserOptionDmi;
+;             IN BOOLEAN             UserOptionPState;
+;             IN BOOLEAN             UserOptionSrat;
+;             IN BOOLEAN             UserOptionSlit;
+;             IN BOOLEAN             UserOptionWhea;
+;             IN UINT32              PowerCeiling;
+;             IN BOOLEAN             PstateIndependent;
+;           } PLATFORM_CONFIGURATION;
+;
+;           typedef struct {
+;             IN UINT8 Socket;
+;             IN UINT8 Link;
+;             IN UINT8 LoFreq;
+;             IN UINT8 HighFreq;
+;             IN PLATFORM_DEEMPHASIS_LEVEL     ReceiverDeemphasis;
+;             IN PLATFORM_DEEMPHASIS_LEVEL     DcvDeemphasis;
+;           } CPU_HT_DEEMPHASIS_LEVEL;
+;
+;           typedef struct {
+;             IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode;
+;             IN BOOLEAN               UseHtAssist;
+;             IN BOOLEAN               UseAtmMode;
+;             IN BOOLEAN               Use32ByteRefresh;
+;             IN BOOLEAN               UseVariableMctIsocPriority;
+;           } PERFORMANCE_PROFILE;
+;
+;   Exit:
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     Provide a single hook routine to modify the parameters of a
+;     PLATFORM_CONFIGURATION structure before any entry point that
+;     has such a structure as an input.
+;
+;   Dependencies:
+;     None
+;
+;   Example:
+;     If your platform is running in UMA mode, the following code
+;     may be added:
+;       mov  (PLATFORM_CONFIGURATION PTR [edi]).PlatformProfile.PlatformControlFlowMode, UmaDr
+;
+EXTERN oemPlatformConfigInit(AmdDfltRetFar):FAR
+
+;+---------------------------------------------------------------------------
+;
+;   oemCallout (Optional)
+;
+;   Entry:
+;     ECX - Callout function number
+;     EDX - Function-specific UINTN
+;     ESI - Pointer to function specific data
+;
+;   Exit:
+;     EAX - Contains the AGESA_STATUS return code.
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     The default call out router function which resides in the same
+;     segment as the push-high bridge code.
+;
+;   Dependencies:
+;     None
+;
+EXTERN oemCallout(AmdDfltRet):NEAR
+
+
+;----------------------------------------------------------------------------
+; Define the sample wrapper routines for the persistent segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+;   AmdBridge32
+;
+;   Entry:
+;     EDX - A Real Mode FAR pointer using seg16:Offset16 format that
+;           points to a local host environment call-out router. If
+;           this pointer is not equal to zero, then this pointer is
+;           used as the call-out router instead of the standard
+;           OemCallout. This may be useful when the call-out router
+;           is not located in the same segment as the AmdBridge32 and
+;           AmdCallout16 routines.
+;     ESI - A Flat Mode pointer (32-bit address) that points to the
+;           configuration block (AMD_CONFIG_PARAMS) for the AGESA
+;           software function.
+;
+;   Exit:
+;     EAX - Contains the AGESA_STATUS return code.
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     Execute an AGESA software function through the Push-High interface.
+;
+;   Dependencies:
+;     This procedure requires a stack. The host environment must use the
+;     provided service function to establish the stack environment prior
+;     to making the call to this procedure.
+;
+AmdBridge32 PROC FAR PUBLIC
+    AMD_BRIDGE_32 AMD_GDT             ; use the macro for the body
+    ret
+AmdBridge32 ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdEnableStack
+;
+;   Entry:
+;     BX - Return address
+;
+;   Exit:
+;     EAX - Contains the AGESA_STATUS return code.
+;     SS:ESP - Points to the private stack location for this processor core.
+;     ECX - Upon success, contains this processor core's stack size in bytes.
+;
+;   Modified:
+;     EAX, ECX, EDX, EDI, ESI, ESP, DS, ES
+;
+;   Purpose:
+;     This procedure is used to establish the stack within the host environment.
+;
+;   Dependencies:
+;     The host environment must use this procedure and not rely on any other
+;     sources to create the stack region.
+;
+AmdEnableStack PROC NEAR PUBLIC
+    AMD_ENABLE_STACK
+    ;; EAX = AGESA_SUCCESS, The stack space has been allocated for this core.
+    ;; EAX = AGESA_WARNING, The stack has already been set up.  SS:ESP is set
+    ;;       to stack top, and ECX is the stack size in bytes.
+    jmp   bx
+AmdEnableStack ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdDisableStack
+;
+;   Entry:
+;     BX - Return address
+;
+;   Exit:
+;     EAX - Contains the AGESA_STATUS return code.
+;
+;   Modified:
+;     EAX, ECX, EDX, ESI, ESP
+;
+;   Purpose:
+;     This procedure is used to remove the pre-memory stack from within the
+;     host environment.
+;     The exit state for the BSP is described as follows:
+;       Memory region 00000-9FFFF MTRRS are set as WB memory.
+;       Processor Cache is enabled (CD bit is cleared).
+;       MTRRs used for execution cache are kept.
+;       Cache content is flushed (invalidated without write-back).
+;       Any family-specific clean-up done.
+;     The exit state for the APs is described as follows:
+;       Memory region 00000-9FFFF MTRRS are set as WB memory.
+;       Memory region A0000-DFFFF MTRRS are set as UC IO.
+;       Memory region E0000-FFFFF MTRRS are set as UC memory.
+;       MTRRs used for execution cache are cleared.
+;       Processor Cache is disabled (CD bit is set).
+;       Top-of-Memory (TOM) set to the system top of memory as determined
+;         by the memory initialization routines.
+;       System lock command is enabled.
+;       Any family-specific clean-up done.
+;
+;   Dependencies:
+;     The host environment must use this procedure and not rely on any other
+;     sources to break down the stack region.
+;     If executing in 16-bit code, the host environment must establish the
+;     "Big Real" mode of 32-bit addressing of data.
+;
+AmdDisableStack PROC NEAR PUBLIC
+    AMD_DISABLE_STACK
+    ;; EAX = AGESA_SUCCESS, The stack space has been disabled for this core.
+    jmp   bx
+AmdDisableStack ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdCallout16
+;
+;   Entry:
+;     [esp+8] - Func
+;     [esp+12] - Data
+;     [esp+16] - Configuration Block
+;     [esp+4] - Return address to AGESA
+;
+;   Exit:
+;     EAX - Contains the AGESA_STATUS return code.
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     Execute callback from the push-high interface.
+;
+;   Dependencies:
+;     None
+;
+AmdCallout16 PROC FAR PUBLIC ; declare the procedure
+    AMD_CALLOUT_16 oemCallout ; use the macro for the body
+    ret
+AmdCallout16 ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdProcessAgesaErrors (Optional)
+;
+;   Entry:
+;     AL - Heap status of the AGESA entry point that was just invoked.
+;     EBX - AGESA image base address.
+;     EDX - Segment / Offset of the appropriate callout router function.
+;
+;   Exit:
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     This procedure is used to handle any errors that may have occurred
+;     during an AGESA entry point.
+;
+;   Dependencies:
+;     None
+;
+AmdProcessAgesaErrors PROC FAR PUBLIC
+    LOCAL localCpuInterfaceBlock:EVENT_PARAMS
+
+    pushad
+    xor   edi, edi
+    mov   di, ss
+    shl   edi, 4
+    lea   esi, localCpuInterfaceBlock
+    add   esi, edi
+
+    ; Fill default config block
+    mov   (EVENT_PARAMS PTR [esi]).StdHeader.Func, AMD_READ_EVENT_LOG
+    mov   (EVENT_PARAMS PTR [esi]).StdHeader.ImageBasePtr, ebx
+    mov   (EVENT_PARAMS PTR [esi]).StdHeader.AltImageBasePtr, 0
+    mov   (EVENT_PARAMS PTR [esi]).StdHeader.HeapStatus, al
+    mov   edi, SEG AmdCallout16
+    shl   edi, 4
+    add   edi, OFFSET AmdCallout16
+    mov   (EVENT_PARAMS PTR [esi]).StdHeader.CalloutPtr, edi
+
+    ; Flush the event log searching for, and handling all monitored events
+    xor   eax, eax
+    .while (eax == 0)
+        push  edx
+        call  AmdBridge32
+        pop   edx
+        .if (eax == AGESA_SUCCESS)
+            mov   eax, (EVENT_PARAMS PTR [esi]).EventInfo
+            .if (eax != 0)
+                lea   di, cs:AgesaEventTable
+
+loopThruTable:
+                cmp   di, OFFSET cs:AgesaEventTableEnd
+                jae   unhandledEvent
+
+                cmp   eax, cs:[di].sOemEventHandler.ClassCode
+                je    FoundMatch
+                add   di, SIZEOF sOemEventHandler
+                jmp   loopThruTable
+
+FoundMatch:
+                mov   bx, cs:[di].sOemEventHandler.FuncPtr
+                call  bx
+
+unhandledEvent:
+                xor   eax, eax
+            .else
+                mov   al, 1
+            .endif
+        .endif
+    .endw
+    popad
+    ret
+
+AmdProcessAgesaErrors ENDP
+
+
+;----------------------------------------------------------------------------
+; Define the error handler table
+;----------------------------------------------------------------------------
+
+AgesaEventTable LABEL BYTE
+    ;; Add entries as desired
+    ;;---------
+    ;; EXAMPLE
+    ;;---------
+    sOemEventHandler <MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, OFFSET myModuleTypeMismatchHandler>
+AgesaEventTableEnd LABEL BYTE
+
+
+AMD_PERSISTENT_END
+
+
+
+
+;----------------------------------------------------------------------------
+;    RECOVERY SEGMENT
+; This segment resides in the classic 'boot-block,' and is used
+; for recovery.
+;----------------------------------------------------------------------------
+
+AMD_RECOVERY_START
+
+
+;----------------------------------------------------------------------------
+; Declare the external routines required in the recovery segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+;   myReadSPDRecovery (Required for proper recovery mode operation)
+;
+;   Entry:
+;     ESI - Pointer to an AGESA_READ_SPD_PARAMS structure.
+;
+;     typedef struct {
+;       IN OUT AMD_CONFIG_PARAMS StdHeader;
+;       IN       UINT8 SocketId;
+;       IN       UINT8 MemChannelId;
+;       IN       UINT8 DimmId;
+;       IN OUT   UINT8 *Buffer;
+;       IN OUT   MEM_DATA_STRUCT *MemData;
+;     } AGESA_READ_SPD_PARAMS;
+;
+;   Exit:
+;     EAX - Contains the AGESA_STATUS return code.
+;           AGESA_SUCCESS Indicates the SPD block for the indicated
+;                         DIMM was read successfully.
+;           AGESA_BOUNDS_CHK The specified DIMM is not present.
+;           AGESA_UNSUPPORTED This is a required function, so this
+;                             value being returned causes a critical
+;                             error response value from the AGESA
+;                             software function and no memory initialized.
+;           AGESA_ERROR The DIMM SPD read process has generated
+;                       communication errors.
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     This call out reads a block of memory SPD data and places it
+;     into the provided buffer.
+;
+;   Dependencies:
+;     None
+;
+EXTERN myReadSPDRecovery:NEAR
+
+
+;----------------------------------------------------------------------------
+; Define the sample wrapper routines for the recovery segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+;   AmdInitResetWrapper
+;
+;   Entry:
+;     DS - 0000 with 4 gigabyte access
+;     ES - 0000 with 4 gigabyte access
+;
+;   Exit:
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     A minimal initialization of the processor core is performed. This
+;     procedure must be called by all processor cores. The code path
+;     separates the BSP from the APs and performs a separate and appropriate
+;     list of tasks for each class of core.
+;     For the BSP, the following actions are performed:
+;       Internal heap sub-system initialization
+;       Primary non-coherent HyperTransportT link initialization
+;       Return to the host environment to test for Recovery Mode.
+;     The AP processor cores do not participate in the recovery process.
+;     However, they execute this routine after being released to execute
+;     by the BSP during the main boot process. Their actions include the
+;     following:
+;       Internal heap sub-system initialization
+;       Proceed to a wait loop waiting for commands from the BSP
+;
+;     For the cache regions, up to three regions of execution cache can be
+;     allocated following the following rules:
+;     1. Once a region is allocated, it cannot be de-allocated. However, it
+;        can be expanded.
+;     2. At most, two of the three regions can be located above 1 MByte. A
+;        region failing this rule is ignored.
+;     3. All region addresses must be at or above the 0x000D0000 linear
+;        address. A region failing this rule is ignored.
+;     4. The address is aligned on a 32-KByte boundary. Starting addresses
+;        is rounded down to the nearest 32-Kbyte boundary.
+;     5. The execution cache size must be a multiple of 32 KByte. Size is
+;        rounded up to the next multiple of 32 KByte.
+;     6. A region must not span either the 1-MByte boundary or the 4-GByte
+;        boundary. Allocated size is truncated to not span the boundary.
+;     7. The granted cached execution regions, address, and size are calculated
+;        based on the available cache resources of the processor core.
+;        Allocations are made up to the limit of cache available on the
+;        installed processor.
+;     Warning: Enabling instruction cache outside of this interface can cause
+;              data corruption.
+;
+;   Dependencies:
+;     This procedure is expected to be executed soon after a system reset
+;     for the main boot path or resume path of execution.
+;
+;     This procedure requires a stack.
+;
+;     Because the heap system is not yet operational at the point of the
+;     interface call, the host environment must allocate the storage for
+;     the AMD_RESET_PARAMS structure before making the first call to
+;     AmdCreateStruct.  This is the ByHost method of allocation.
+;
+AmdInitResetWrapper PROC NEAR PUBLIC
+    local localCfgBlock:AMD_INTERFACE_PARAMS
+    local localResetParams:AMD_RESET_PARAMS
+
+    pushad
+
+    ; Prepare for the call to initialize the input parameters for AmdInitReset
+    xor   eax, eax
+    mov   ax, ss
+    shl   eax, 4
+    lea   esi, localCfgBlock
+    add   esi, eax
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+    mov   edx, SEG AmdCallout16
+    shl   edx, 4
+    add   edx, OFFSET AmdCallout16
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+    ; Use the 'ByHost' allocation method because the heap has not been initialized as of yet.
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESET
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, ByHost
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, sizeof AMD_RESET_PARAMS
+    lea   edx, localResetParams
+    add   edx, eax
+    push  edx
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr, edx
+    mov   dx, SEG AmdCalloutRouterRecovery
+    shl   edx, 16
+    mov   dx, OFFSET AmdCalloutRouterRecovery
+    push  edx
+    call  AmdBridge32
+    pop   edx
+    pop   esi
+
+    ; The structure has been initialized.  Now modify the default settings as desired.
+
+    ; Allocate the execution cache to maximize the amount of code in ROM that is cached.
+    ; Placing the B1 and B2 images near one another is a good way to ensure the AGESA code
+    ; is cached.
+    mov   (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_0
+    mov   (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_0
+    mov   (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_1
+    mov   (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_1
+    mov   (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_2
+    mov   (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_2
+
+    ; Call in to the AmdInitReset entry point
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    ;;  EAX = AGESA_STATUS
+    ;;  AGESA_SUCCESS Early initialization completed successfully.
+    ;;  AGESA_WARNING One or more of the execution cache allocation
+    ;;                rules were violated, but an adjustment was made
+    ;;                and space was allocated.
+    ;;  AGESA_ERROR One or more of the execution cache allocation rules
+    ;;              were violated, which resulted in a requested cache
+    ;;              region to not be allocated.
+    ;;              The storage space allocated for the AMD_RESET_PARAMS
+    ;;              structure is insufficient.
+
+    .if (eax != AGESA_SUCCESS)
+        mov   al, (AMD_RESET_PARAMS ptr [esi]).StdHeader.HeapStatus
+        mov   ebx, AGESA_B1_ADDRESS
+        call  AmdProcessAgesaErrors
+    .endif
+
+
+    ;; Here are what the MTRRs should look like based off of the CacheRegions specified above:
+
+    ;; Fixed-Range MTRRs
+    ;; Name                 Address         Value
+    ;; ----------------     --------        ----------------
+    ;; MTRRfix4k_E0000      0000026C        0505050505050505
+    ;; MTRRfix4k_E8000      0000026D        0505050505050505
+    ;; MTRRfix4k_F0000      0000026E        0505050505050505
+    ;; MTRRfix4k_F8000      0000026F        0505050505050505
+    ;; MTRRdefType          000002FF        0000000000000C00
+    ;;
+    ;; Variable-Range MTRRs and IO Range
+    ;;       MTRRphysBase(n)             MTRRphysMask(n)
+    ;;       -----------------           -----------------
+    ;; n=0   0000000000000000            0000000000000000
+    ;; n=1   0000000000000000            0000000000000000
+    ;; n=2   0000000000000000            0000000000000000
+    ;; n=3   0000000000000000            0000000000000000
+    ;; n=4   0000000000000000            0000000000000000
+    ;; n=5   Heap Base (Varies by core)  0000FFFFFFFF0800
+    ;; n=6   AGESA_B1_ADDRESS | 6        0000FFFFFFFC0800
+    ;; n=7   0000000000000000            0000000000000000
+
+
+    ;; Because the allocation method is 'ByHost,' the call to AMD_RELEASE_STRUCT is
+    ;; not necessary.  Stack space reclamation is left up to the host BIOS.
+
+    popad
+    ret
+
+
+AmdInitResetWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdInitRecoveryWrapper
+;
+;   Entry:
+;     DS - 0000 with 4 gigabyte access
+;     ES - 0000 with 4 gigabyte access
+;
+;   Exit:
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     Perform a minimum initialization of the processor and memory to
+;     support a recovery mode flash ROM update.
+;     For the BSP, the following actions are performed:
+;       Configuration of CPU core for recovery process
+;       Minimal initialization of some memory
+;     The AP processor cores do not participate in the recovery process.
+;     No actions or tasks are performed by the AP cores for this time point.
+;
+;   Dependencies:
+;     This procedure requires a stack. The host environment must use one of
+;     the provided service functions to establish the stack environment prior
+;     to making the call to this procedure.
+;
+AmdInitRecoveryWrapper PROC NEAR PUBLIC
+    local localCfgBlock:AMD_INTERFACE_PARAMS
+
+    pushad
+
+    ; Prepare for the call to create and initialize the input parameters for AmdInitRecovery
+    xor   eax, eax
+    mov   ax, ss
+    shl   eax, 4
+    lea   esi, localCfgBlock
+    add   esi, eax
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+    mov   edx, SEG AmdCallout16
+    shl   edx, 4
+    add   edx, OFFSET AmdCallout16
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RECOVERY
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+    push  esi
+    mov   dx, SEG AmdCalloutRouterRecovery
+    shl   edx, 16
+    mov   dx, OFFSET AmdCalloutRouterRecovery
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    mov   esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+    ; The structure has been initialized.  Now modify the default settings as desired.
+
+
+    ; Call in to the AmdInitRecovery entry point
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    ;;  EAX = AGESA_STATUS
+    ;;  AGESA_SUCCESS The function has completed successfully.
+    ;;  AGESA_WARNING One or more of the allocation rules were violated,
+    ;;                but an adjustment was made and space was allocated.
+    ;;  AGESA_ERROR One or more of the allocation rules were violated,
+    ;;              which resulted in a requested cache region to not be
+    ;;              allocated.
+    ;;  AGESA_FATAL No memory was found in the system.
+
+    .if (eax != AGESA_SUCCESS)
+        mov   al, (AMD_RECOVERY_PARAMS ptr [esi]).StdHeader.HeapStatus
+        mov   ebx, AGESA_B1_ADDRESS
+        call  AmdProcessAgesaErrors
+    .endif
+
+    ; Allow AGESA to free the space used by AmdInitRecovery
+    pop   esi
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+    call  AmdBridge32
+
+    popad
+    ret
+AmdInitRecoveryWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdCalloutRouterRecovery
+;
+;   Entry:
+;     ECX - Callout function number
+;     EDX - Function-specific UINTN
+;     ESI - Pointer to function specific data
+;
+;   Exit:
+;     EAX - Contains the AGESA_STATUS return code.
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     The call out router function for AmdInitReset and
+;     AmdInitRecovery.
+;
+;   Dependencies:
+;     None
+;
+AmdCalloutRouterRecovery PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES
+    xor   ax, ax
+    mov   ds, ax
+    mov   es, ax
+    lea   di, cs:CalloutRouterTableRecovery
+    mov   eax, AGESA_UNSUPPORTED
+
+loopThruTable:
+    cmp   di, OFFSET cs:CalloutRouterTableRecoveryEnd
+    jae   amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED
+    cmp   ecx, cs:[di].sOemCallout.FuncName
+    je    FoundMatch
+    add   di, SIZEOF sOemCallout
+    jmp   loopThruTable
+
+FoundMatch:
+    mov   bx, cs:[di].sOemCallout.FuncPtr
+    call  bx
+
+amdCpuCalloutExit:
+    ret
+AmdCalloutRouterRecovery ENDP
+
+
+;----------------------------------------------------------------------------
+; Define the callout dispatch table for the recovery segment
+;----------------------------------------------------------------------------
+
+CalloutRouterTableRecovery LABEL BYTE
+    ;; Standard B1 implementations only need the SPD reader call out function to be implemented.
+    sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDRecovery>
+CalloutRouterTableRecoveryEnd LABEL BYTE
+
+
+AMD_RECOVERY_END
+
+
+
+;----------------------------------------------------------------------------
+;    PRE-MEMORY SEGMENT
+; This segment must be uncompressed in the ROM image.
+;----------------------------------------------------------------------------
+
+AMD_PREMEM_START
+
+
+;----------------------------------------------------------------------------
+; Declare the external routines required in the recovery segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+;   myReadSPDPremem (Required)
+;
+;   Entry:
+;     ESI - Pointer to an AGESA_READ_SPD_PARAMS structure
+;
+;     typedef struct {
+;       IN OUT AMD_CONFIG_PARAMS StdHeader;
+;       IN       UINT8 SocketId;
+;       IN       UINT8 MemChannelId;
+;       IN       UINT8 DimmId;
+;       IN OUT   UINT8 *Buffer;
+;       IN OUT   MEM_DATA_STRUCT *MemData;
+;     } AGESA_READ_SPD_PARAMS;
+;
+;   Exit:
+;     EAX - Contains the AGESA_STATUS return code.
+;           AGESA_SUCCESS Indicates the SPD block for the indicated
+;                         DIMM was read successfully.
+;           AGESA_BOUNDS_CHK The specified DIMM is not present.
+;           AGESA_UNSUPPORTED This is a required function, so this
+;                             value being returned causes a critical
+;                             error response value from the AGESA
+;                             software function and no memory initialized.
+;           AGESA_ERROR The DIMM SPD read process has generated
+;                       communication errors.
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     This call out reads a block of memory SPD data and places it
+;     into the provided buffer.
+;
+;   Dependencies:
+;     None
+;
+EXTERN myReadSPDPremem:NEAR
+
+;+-------------------------------------------------------------------------
+;
+;   AmdDfltRetPremem
+;
+;   Entry:
+;     None
+;
+;   Exit:
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     Near stub procedure in the prememory segment.  Simply perform a
+;     retn instruction.
+;
+EXTERN AmdDfltRetPremem:NEAR
+
+;+---------------------------------------------------------------------------
+;
+;   myDoReset (Required)
+;
+;   Entry:
+;     EDX - Reset type
+;           1 - Warm reset whenever
+;           2 - Cold reset whenever
+;           3 - Warm reset immediately
+;           4 - Cold reset immediately
+;     ESI - Pointer to an AMD_CONFIG_PARAMS structure.
+;
+;   Exit:
+;     EAX - Contains the AGESA_STATUS return code.
+;           AGESA_SUCCESS The function has completed successfully.
+;           AGESA_UNSUPPORTED This is a required function, so this
+;                             value being returned causes a critical
+;                             error response value from the AGESA
+;                             software function.
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     This host environment function must initiate the specified type
+;     of system reset.
+;
+;     Implementation of this function by the host environment is
+;     REQUIRED. Some host environments may record this as a request
+;     allowing other elements in the system to perform some additional
+;     tasks before the actual reset is issued.
+;
+;   Dependencies:
+;     The AMD processor contains 3 bits (BiosRstDet[2:0]) in a PCI
+;     register (F0x6C Link Initialization Control Register) that
+;     indicate the reset status. These bits are reserved for use by
+;     the AGESA software and should not be modified by the host
+;     environment.
+;
+EXTERN myDoReset:NEAR
+
+
+;+---------------------------------------------------------------------------
+;
+;   myGetNonVolatileS3Context (Required for proper S3 operation)
+;
+;   Entry:
+;     None
+;
+;   Exit:
+;     EBX - Pointer to the non-volatile S3 context block
+;     ECX - Size in bytes of the non-volatile S3 context block
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     The host environment must return the pointer to the data
+;     saved during the mySaveNonVolatileS3Context routine.
+;
+;   Dependencies:
+;     None
+;
+EXTERN myGetNonVolatileS3Context:NEAR
+
+
+;----------------------------------------------------------------------------
+; Declare the optional external routines in the prememory segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+;   myAgesaHookBeforeExitSelfRefresh (Optional)
+;
+;   Entry:
+;     Prior to this hook, AGESA will display - AGESA_TESTPOINT - 44h
+;     ESI - Pointer to a data structure containing the memory information
+;
+;   Exit:
+;     After returning control to AGESA, AGESA will display: - AGESA_TESTPOINT - 45h
+;     EAX - Contains the AGESA_STATUS return code
+;           AGESA_SUCCESS The function has completed successfully
+;           AGESA_UNSUPPORTED This function is not implemented by the host environment
+;           AGESA_WARNING A non-critical issue has occued in the host environment
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     General purpose hook called before the exiting self refresh
+;     This procedure is called once per channel
+;
+;     Implementation of this function is optional for the host environment
+;     This call-out is an opportunity for the host environment to make dynamic
+;     modifications to the memory timing settings specific to the board or host
+;     environment before exiting self refresh on S3 resume
+;
+;   Dependencies:
+;     This procedure is called before the exit self refresh bit is set in the resume
+;     sequence. The host environment must initiate the OS restart process. This procedure
+;     requires a stack. The host environment must establish the stack environment prior
+;     to making the call to this procedure
+;
+EXTERN myAgesaHookBeforeExitSelfRefresh(AmdDfltRetPremem):NEAR
+
+
+;+---------------------------------------------------------------------------
+;
+;   myHookBeforeDramInit (Optional)
+;
+;   Entry:
+;     Prior to this hook, AGESA will display - AGESA_TESTPOINT - 40h
+;     ESI - Pointer to a data structure containing the memory information
+;
+;   Exit:
+;     After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 41h
+;     EAX - Contains the AGESA_STATUS return code.
+;           AGESA_SUCCESS The function has completed successfully.
+;           AGESA_UNSUPPORTED This function is not implemented by the host environment
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     General-purpose hook called before the DRAM_Init bit is set. Called
+;     once per MCT
+;
+;     Implementation of this function is optional for the host environment
+;     This call-out is an opportunity for the host environment to make
+;     dynamic modifications to the memory timing settings specific to the
+;     board or host environment
+;
+;   Dependencies:
+;     None
+;
+EXTERN myHookBeforeDramInit(AmdDfltRetPremem):NEAR
+
+
+;+---------------------------------------------------------------------------
+;
+;   myHookBeforeDQSTraining (Optional)
+;
+;   Entry:
+;     Prior to this hook, AGESA will display - AGESA_TESTPOINT - 42h
+;     ESI - Pointer to a data structure containing the memory information.
+;
+;   Exit:
+;     After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 43h
+;     EAX - Contains the AGESA_STATUS return code.
+;           AGESA_SUCCESS The function has completed successfully.
+;           AGESA_UNSUPPORTED This function is not implemented by the
+;                             host environment.
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     General-purpose hook called just before the memory training processes
+;     begin. Called once per MCT.
+;
+;     Implementation of this function is optional for the host environment.
+;     This call-out is an opportunity for the host environment to make
+;     dynamic modifications to the memory timing settings specific to the
+;     board or host environment.
+;
+;     The host environment may also use this call-out for some board-
+;     specific features that should be activated at this time point,
+;     such as:
+;       Low voltage DIMMs-the host environment should set the recommended
+;       voltages found in the memory data structure for each memory
+;       channel. This needs to occur before training begins.
+;
+;   Dependencies:
+;     None
+;
+EXTERN myHookBeforeDQSTraining(AmdDfltRetPremem):NEAR
+
+
+;----------------------------------------------------------------------------
+; Define the sample wrapper routines for the prememory segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+;   AmdInitEarlyWrapper
+;
+;   Entry:
+;     On Entry to "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C4h
+;     DS - 0000 with 4 gigabyte access
+;     ES - 0000 with 4 gigabyte access
+;
+;   Exit:
+;     On Exit from "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C5h
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     A full initialization of the processor is performed. Action details
+;     differ for the BSP and AP processor cores.
+;     For the BSP, the following actions are performed:
+;       Full HyperTransportT link initialization, coherent and non-coherent
+;       Processor register loading
+;       Microcode patch load
+;       Errata workaround processing
+;       Launch all processor cores
+;       Configure the processor power management capabilities
+;       Request a warm reset if needed
+;     For the AP, the following actions are performed:
+;       Processor register loading
+;       Microcode patch load
+;       Errata workaround processing
+;       Configure the processor power management capabilities
+;
+;   Dependencies:
+;     This procedure is expected to be called before main memory initialization
+;     and before the system warm reset. Prior to this, the basic configuration
+;     done by the AmdInitReset routine must be completed.
+;
+;     This procedure requires a stack. The host environment must use one of the
+;     provided service functions to establish the stack environment prior to
+;     making the call to this procedure.
+;
+;     The processes performed at this time point require communication between
+;     processor cores.
+;
+;     The host environment must recognize that all processor cores are running
+;     in parallel and avoid activities that might interfere with the core-to-core
+;     communication, such as modifying the MTRR settings or writing to the APIC
+;     registers.
+;
+AmdInitEarlyWrapper PROC NEAR PUBLIC
+    local localCfgBlock:AMD_INTERFACE_PARAMS
+
+    pushad
+
+    ; Prepare for the call to create and initialize the input parameters for AmdInitEarly
+    xor   eax, eax
+    mov   ax, ss
+    shl   eax, 4
+    lea   esi, localCfgBlock
+    add   esi, eax
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+    mov   edx, SEG AmdCallout16
+    shl   edx, 4
+    add   edx, OFFSET AmdCallout16
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_EARLY
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+    push  esi
+    mov   dx, SEG AmdCalloutRouterPremem
+    shl   edx, 16
+    mov   dx, OFFSET AmdCalloutRouterPremem
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    mov   esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+    ; The structure has been initialized.  Now modify the default settings as desired.
+
+    mov   edi, esi
+    add   edi, (SIZEOF AMD_CONFIG_PARAMS + (3 * (SIZEOF EXECUTION_CACHE_REGION)))
+    call  oemPlatformConfigInit
+
+    ; Call in to the AmdInitEarly entry point
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    ;;  EAX = AGESA_STATUS
+    ;;  AGESA_SUCCESS The function has completed successfully.
+    ;;  AGESA_ALERT An HyperTransportT link CRC error was observed.
+    ;;  AGESA_WARNING One of more of the allocation rules were violated,
+    ;;                but an adjustment was made and space was allocated.
+    ;;                Or a HyperTransport device does not have the expected
+    ;;                capabilities, or unusable redundant HyperTransport
+    ;;                links were found.
+    ;;  AGESA_ERROR One or more of the allocation rules were violated, which
+    ;;              resulted in a requested cache region to not be allocated.
+    ;;              Or, a HyperTransport device failed to initialize.
+    ;;  AGESA_CRITICAL An illegal or unsupported mixture of processor types was
+    ;;                 found, or the processors installed were found to have an
+    ;;                 insufficient MP capability rating for this platform.
+
+    .if (eax != AGESA_SUCCESS)
+        mov   al, (AMD_EARLY_PARAMS ptr [esi]).StdHeader.HeapStatus
+        mov   ebx, AGESA_B2_ADDRESS
+        call  AmdProcessAgesaErrors
+    .endif
+
+    ; Allow AGESA to free the space used by AmdInitEarly
+    pop   esi
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+    call  AmdBridge32
+
+
+    popad
+    ret
+AmdInitEarlyWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdInitPostWrapper
+;
+;   Entry:
+;     On Entry to "AmdInitPost" AGESA will display AGESA_TESTPOINT - C6h
+;     DS - 0000 with 4 gigabyte access
+;     ES - 0000 with 4 gigabyte access
+;
+;   Exit:
+;     On Exit from "AmdInitPost" AGESA will display AGESA_TESTPOINT - C7h
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     The main system memory is located, initialized, and brought on-line.
+;     The processor(s) are prepared for full operation and control by the
+;     host environment. Action details differ for the BSP and AP processor
+;     cores.
+;     For the BSP, the following actions are performed:
+;       Full memory initialization and configuration. BSP is the master for
+;       this process and may delegate some tasks to APs.
+;       AP collection of data for use later.
+;       Transfer the HOBs including the artifact data out of the pre-memory
+;       cache storage into a temporary holding buffer in the main memory.
+;       Check the BIST status of the BSP
+;       Shut down the APs.
+;       Prepare for the host environment to begin main boot activity.
+;       Disable the pre-memory stack.
+;     For the APs, the following actions are performed:
+;       Report core identity information.
+;       Execute indicated memory initialization processes as directed.
+;       Check the BIST status of the AP
+;       Disable the pre-memory stack.
+;       Prepare to halt, giving control to host environment.
+;     The entire range of system memory is enabled for Write-Back cache.
+;     The fixed MTRRs and the variable MTRRs[7:6] are not changed in order
+;     to leave in place any flash ROM region currently set for Write-Protect
+;     execution cache.
+;
+;   Dependencies:
+;     This procedure is called after the host environment has determined that
+;     a normal boot to operating system should be performed after any system
+;     warm reset is completed and after the configuration done by AmdInitEarly
+;     has completed.
+;
+;     This procedure requires a stack. The host environment must use one of the
+;     provided service functions to establish the stack environment prior to
+;     making the call to this procedure.
+;
+;     The processes performed at this time point require communication between
+;     processor cores.  The host environment must recognize that all processor
+;     cores are running in parallel and avoid activities that might interfere
+;     with the core-to-core communication, such as modifying the MTRR settings
+;     or writing to the APIC registers.
+;
+AmdInitPostWrapper PROC NEAR PUBLIC
+    local localCfgBlock:AMD_INTERFACE_PARAMS
+
+    pushad
+
+    ; Prepare for the call to create and initialize the input parameters for AmdInitPost
+    xor   eax, eax
+    mov   ax, ss
+    shl   eax, 4
+    lea   esi, localCfgBlock
+    add   esi, eax
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+    mov   edx, SEG AmdCallout16
+    shl   edx, 4
+    add   edx, OFFSET AmdCallout16
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_POST
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+    push  esi
+    mov   dx, SEG AmdCalloutRouterPremem
+    shl   edx, 16
+    mov   dx, OFFSET AmdCalloutRouterPremem
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    mov   esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+    ; The structure has been initialized.  Now modify the default settings as desired.
+
+    mov   edi, esi
+    add   edi, SIZEOF AMD_CONFIG_PARAMS
+    call  oemPlatformConfigInit
+
+    ; Call in to the AmdInitPost entry point
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    ;;  EAX = AGESA_STATUS
+    ;;  AGESA_SUCCESS The function has completed successfully.
+    ;;  AGESA_ALERT   A BIST error was found on one of the cores.
+    ;;  AGESA_WARNING HT Assist feature is running sub-optimally.
+    ;;  AGESA_FATAL   Memory initialization failed.
+
+    .if (eax != AGESA_SUCCESS)
+        mov   al, (AMD_POST_PARAMS ptr [esi]).StdHeader.HeapStatus
+        mov   ebx, AGESA_B2_ADDRESS
+        call  AmdProcessAgesaErrors
+    .endif
+
+    ; Allow AGESA to free the space used by AmdInitPost
+    pop   esi
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+    call  AmdBridge32
+
+
+    popad
+    ret
+AmdInitPostWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdInitResumeWrapper
+;
+;   Entry:
+;     On Entry to "AmdInitResume" AGESA will display AGESA_TESTPOINT - D0h
+;     DS - 0000 with 4 gigabyte access
+;     ES - 0000 with 4 gigabyte access
+;
+;   Exit:
+;     On Exit from "AmdInitResume" AGESA will display AGESA_TESTPOINT - D1h
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     This procedure initializes or re-initializes the silicon components
+;     for the resume boot path.  For the processor, main memory is brought
+;     out of self-refresh mode. This procedure will use the context data
+;     in the NvStorage area of the input structure to re-start the main
+;     memory.  The host environment must fill the AMD_S3_PARAMS NvStorage
+;     and VolatileStorage pointers and related size elements to describe
+;     the location of the context data. Note that for this procedure, the
+;     two data areas do not need to be contained in one buffer zone, they
+;     can be anywhere in the accessible memory address space. If the host
+;     environment uses a non-volatile storage device accessed on the system
+;     address bus such as flashROM, then the context data does not need to
+;     be moved prior to this call. If the host environment uses a non-
+;     volatile storage device not located on the system address bus (e.g.
+;     CMOS or SSEPROM) then the host environment must transfer the context
+;     data to a buffer in main memory prior to calling this procedure.
+;
+;   Dependencies:
+;     The host environment must have determined that the system should take
+;     the resume path prior to calling this procedure. The configuration
+;     done by AmdInitEarly and any necessary warm reset must be complete.
+;     After this procedure, execution proceeds to general system restoration.
+;
+;     This procedure requires a stack. The host environment must use one of
+;     the provided service functions to establish the stack environment prior
+;     to making the call to this procedure.
+;
+AmdInitResumeWrapper PROC NEAR PUBLIC
+    local localCfgBlock:AMD_INTERFACE_PARAMS
+
+    pushad
+
+    ; Prepare for the call to create and initialize the input parameters for AmdInitResume
+    xor   eax, eax
+    mov   ax, ss
+    shl   eax, 4
+    lea   esi, localCfgBlock
+    add   esi, eax
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+    mov   edx, SEG AmdCallout16
+    shl   edx, 4
+    add   edx, OFFSET AmdCallout16
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESUME
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+    push  esi
+    mov   dx, SEG AmdCalloutRouterPremem
+    shl   edx, 16
+    mov   dx, OFFSET AmdCalloutRouterPremem
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    mov   esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+    ; The structure has been initialized.  Now modify the default settings as desired.
+
+    mov   edi, esi
+    add   edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS)
+    call  oemPlatformConfigInit
+
+    call  myGetNonVolatileS3Context
+    mov   (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorage, ebx
+    mov   (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorageSize, ecx
+
+    ; Call in to the AmdInitResume entry point
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    ;;  EAX = AGESA_STATUS
+    ;;  AGESA_SUCCESS Re-initialization has been completed successfully.
+    .if (eax != AGESA_SUCCESS)
+        mov   al, (AMD_RESUME_PARAMS ptr [esi]).StdHeader.HeapStatus
+        mov   ebx, AGESA_B2_ADDRESS
+        call  AmdProcessAgesaErrors
+    .endif
+
+
+    ; Allow AGESA to free the space used by AmdInitResume
+    pop   esi
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+    call  AmdBridge32
+
+
+    popad
+    ret
+AmdInitResumeWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdCalloutRouterPremem
+;
+;   Entry:
+;     ECX - Callout function number
+;     EDX - Function-specific UINTN
+;     ESI - Pointer to function specific data
+;
+;   Exit:
+;     EAX - Contains the AGESA_STATUS return code.
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     The call out router function for AmdInitEarly,
+;     AmdInitPost, and AmdInitResume.
+;
+;   Dependencies:
+;     None
+;
+AmdCalloutRouterPremem PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES
+    xor   ax, ax
+    mov   ds, ax
+    mov   es, ax
+    lea   di, cs:CalloutRouterTablePremem
+    mov   eax, AGESA_UNSUPPORTED
+
+loopThruTable:
+    cmp   di, OFFSET cs:CalloutRouterTablePrememEnd
+    jae   amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED
+    cmp   ecx, cs:[di].sOemCallout.FuncName
+    je    FoundMatch
+    add   di, SIZEOF sOemCallout
+    jmp   loopThruTable
+
+FoundMatch:
+    mov   bx, cs:[di].sOemCallout.FuncPtr
+    call  bx
+
+amdCpuCalloutExit:
+    ret
+AmdCalloutRouterPremem ENDP
+
+
+;----------------------------------------------------------------------------
+; Define the callout dispatch table for the prememory segment
+;----------------------------------------------------------------------------
+
+CalloutRouterTablePremem LABEL BYTE
+    ;; Add entries as desired.
+    sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDPremem>
+    sOemCallout <AGESA_HOOKBEFORE_DRAM_INIT, OFFSET myHookBeforeDramInit>
+    sOemCallout <AGESA_HOOKBEFORE_DQS_TRAINING, OFFSET myHookBeforeDQSTraining>
+    sOemCallout <AGESA_HOOKBEFORE_EXIT_SELF_REF, OFFSET myAgesaHookBeforeExitSelfRefresh>
+    sOemCallout <AGESA_DO_RESET, OFFSET myDoReset>
+    sOemCallout <AGESA_EXTERNAL____TRAIN_VREF_CHANGE, OFFSET my__TrainVrefChange>
+CalloutRouterTablePrememEnd LABEL BYTE
+
+
+
+AMD_PREMEM_END
+
+
+;----------------------------------------------------------------------------
+;    POST SEGMENT
+; This segment may be decompressed and run from system RAM.
+;----------------------------------------------------------------------------
+
+AMD_POST_START
+
+
+;----------------------------------------------------------------------------
+; Declare the external routines required in the POST segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+;   myAllocateBuffer (Required)
+;
+;   Entry:
+;     Prior to this hook, AGESA will display - AGESA_TESTPOINT - E2h
+;     ESI - Pointer to an AGESA_BUFFER_PARAMS structure.
+;
+;           typedef struct {
+;             IN OUT   AMD_CONFIG_PARAMS StdHeader;
+;             IN       UINT32 BufferLength;
+;             IN       UINT32 BufferHandle;
+;                OUT   VOID *BufferPointer;
+;           } AGESA_BUFFER_PARAMS;
+;
+;   Exit:
+;     After this hook, AGESA will display - AGESA_TESTPOINT - E3h
+;     EAX - Contains the AGESA_STATUS return code.
+;           AGESA_SUCCESS The requested size of memory has been
+;                         successfully allocated.
+;           AGESA_UNSUPPORTED This is a required function, so this
+;                             value being returned causes a critical
+;                             error response value from the AGESA
+;                             software function.
+;           AGESA_ERROR Less than the requested amount of memory
+;                       was allocated.
+;
+;   Modified:
+;     EAX
+;
+;   Purpose:
+;     This function is used after main memory has been initialized
+;     and the host environment has taken control of memory allocation.
+;     This function must allocate a buffer of the requested size or
+;     larger. This function is required to be implemented by the host
+;     environment.
+;
+;   Dependencies:
+;     The following call-outs must work together in the host system.
+;     Parameters of the same name have the same function and must be
+;     treated the same in each function:
+;       AgesaAllocateBuffer
+;       AgesaDeallocateBuffer
+;       AgesaLocateBuffer
+;       AgesaRunFcnOnAp
+;     The host environment may need to reserve a location in the buffer
+;     to store any host environment specific value(s). The returned
+;     pointer must not include this reserved space. The host environment
+;     on the AgesaDeallocateBuffer call needs to account for the reserved
+;     space.  This reserved space may be an identifier or the "handle"
+;     used to identify the specific memory block.
+;
+EXTERN myAllocateBuffer:NEAR
+
+;+---------------------------------------------------------------------------
+;
+;   myDeallocateBuffer (Required)
+;
+;   Entry:
+;     Prior to this hook, AGESA will display - AGESA_TESTPOINT - E4h
+;     ESI - Pointer to an AGESA_BUFFER_PARAMS structure.
+;
+;           typedef struct {
+;             IN OUT   AMD_CONFIG_PARAMS StdHeader;
+;             IN       UINT32 BufferLength;
+;             IN       UINT32 BufferHandle;
+;                OUT   VOID *BufferPointer;
+;           } AGESA_BUFFER_PARAMS;
+;
+;   Exit:
+;     After this hook, AGESA will display - AGESA_TESTPOINT - E5h
+;     EAX - Contains the AGESA_STATUS return code.
+;           AGESA_SUCCESS The function has completed successfully.
+;           AGESA_BOUNDS_CHK The BufferHandle is invalid. The AGESA
+;                            software continues with its function.
+;           AGESA_UNSUPPORTED This is a required function, so this
+;                             value being returned causes a critical
+;                             error response value from the AGESA
+;                             software function.
+;
+;   Modified:
+;     EAX
+;
+;   Purpose:
+;     This function is used after main memory has been initialized
+;     and the host environment has taken control of memory allocation.
+;     This function releases a valid working buffer. This function is
+;     required for the host environment to implement.
+;
+;   Dependencies:
+;     The following call-outs must work together in the host system.
+;     Parameters of the same name have the same function and must be
+;     treated the same in each function:
+;       AgesaAllocateBuffer
+;       AgesaDeallocateBuffer
+;       AgesaLocateBuffer
+;       AgesaRunFcnOnAp
+;
+EXTERN myDeallocateBuffer:NEAR
+
+;+---------------------------------------------------------------------------
+;
+;   myLocateBuffer (Required)
+;
+;   Entry:
+;     Prior to this hook, AGESA will display - AGESA_TESTPOINT - E6h
+;     ESI - Pointer to an AGESA_BUFFER_PARAMS structure.
+;
+;           typedef struct {
+;             IN OUT   AMD_CONFIG_PARAMS StdHeader;
+;             IN       UINT32 BufferLength;
+;             IN       UINT32 BufferHandle;
+;                OUT   VOID *BufferPointer;
+;           } AGESA_BUFFER_PARAMS;
+;
+;   Exit:
+;     After this hook, AGESA will display - AGESA_TESTPOINT - E7h
+;     EAX - Contains the AGESA_STATUS return code.
+;           AGESA_SUCCESS The function has completed successfully.
+;           AGESA_BOUNDS_CHK The presented handle is invalid or the
+;                            buffer could not be located.
+;
+;   Modified:
+;     EAX
+;
+;   Purpose:
+;     This function is used after main memory has been initialized
+;     and the host environment has taken control of memory allocation.
+;     This function must locate the buffer related to the indicated
+;     handle and return the address of the buffer and its length.
+;     This function is required to be implemented in the host
+;     environment.
+;
+;   Dependencies:
+;     The following call-outs must work together in the host system.
+;     Parameters of the same name have the same function and must be
+;     treated the same in each function:
+;       AgesaAllocateBuffer
+;       AgesaDeallocateBuffer
+;       AgesaLocateBuffer
+;       AgesaRunFcnOnAp
+;
+EXTERN myLocateBuffer:NEAR
+
+
+;+---------------------------------------------------------------------------
+;
+;   myRunFuncOnAp (Required)
+;
+;   Entry:
+;     EDX - Local APIC ID of the target core.
+;
+;   Exit:
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     The host environment must route execution to the target AP and
+;     have that AP call the AmdLateRunApTaskWrapper routine defined
+;     above.
+;
+;   Dependencies:
+;     None
+;
+EXTERN myRunFuncOnAp:NEAR
+
+;+---------------------------------------------------------------------------
+;
+;   mySaveNonVolatileS3Context (Required for proper S3 operation)
+;
+;   Entry:
+;     EBX - Pointer to the non-volatile S3 context block
+;     ECX - Size in bytes of the non-volatile S3 context block
+;
+;   Exit:
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     The host environment must save the non-volatile data to an area
+;     that will not lose context while in the ACPI S3 sleep state, but
+;     cannot be placed in system RAM.  This data will need to be
+;     available during the call to AmdInitResume.
+;
+;   Dependencies:
+;     None
+;
+EXTERN mySaveNonVolatileS3Context:NEAR
+
+;+---------------------------------------------------------------------------
+;
+;   mySaveVolatileS3Context (Required for proper S3 operation)
+;
+;   Entry:
+;     EBX - Pointer to the volatile S3 context block
+;     ECX - Size in bytes of the volatile S3 context block
+;
+;   Exit:
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     The host environment must save the volatile data to an area
+;     that will not lose context while in the ACPI S3 sleep state.
+;     This data will need to be available during the call to
+;     AmdS3LateRestore.
+;
+;   Dependencies:
+;     None
+;
+EXTERN mySaveVolatileS3Context:NEAR
+
+;+---------------------------------------------------------------------------
+;
+;   myGetVolatileS3Context (Required for proper S3 operation)
+;
+;   Entry:
+;     None
+;
+;   Exit:
+;     EBX - Pointer to the volatile S3 context block
+;     ECX - Size in bytes of the volatile S3 context block
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     The host environment must return the pointer to the data
+;     saved during the mySaveVolatileS3Context routine.
+;
+;   Dependencies:
+;     None
+;
+EXTERN myGetVolatileS3Context:NEAR
+
+
+;----------------------------------------------------------------------------
+; Define the sample wrapper routines for the POST segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+;   AmdInitEnvWrapper
+;
+;   Entry:
+;     On Entry to "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C8h
+;     DS - 0000 with 4 gigabyte access
+;     ES - 0000 with 4 gigabyte access
+;
+;   Exit:
+;     On Exit from "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C9h
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     This procedure uses the AgesaAllocateBuffer call-out to acquire
+;     permanent buffer space for the UEFI Hand-Off Blocks (HOBs). This
+;     is also known as, or includes, artifact data being used by the
+;     AGESA software. Upon entry to this procedure, the data is being
+;     held in a temporary memory location and it must be moved to a
+;     location controlled and protected by the host environment.
+;
+;     These actions are performed by the BSP. The APs are not assigned
+;     any tasks at this time point.
+;
+;   Dependencies:
+;     This procedure must be called after full memory is initialized and
+;     the host environment has taken control of main memory allocation.
+;     This procedure should be called before the PCI enumeration takes
+;     place and as soon as possible after the host environment memory
+;     allocation sub-system has started.
+;
+;     This procedure requires a stack. The host environment must use one
+;     of the provided service functions to establish the stack environment
+;     prior to making the call to this procedure.
+;
+AmdInitEnvWrapper PROC NEAR PUBLIC
+    local localCfgBlock:AMD_INTERFACE_PARAMS
+
+    pushad
+
+    ; Prepare for the call to create and initialize the input parameters for AmdInitEnv
+    xor   eax, eax
+    mov   ax, ss
+    shl   eax, 4
+    lea   esi, localCfgBlock
+    add   esi, eax
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+    mov   edx, SEG AmdCallout16
+    shl   edx, 4
+    add   edx, OFFSET AmdCallout16
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_ENV
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+    push  esi
+    mov   dx, SEG AmdCalloutRouterPost
+    shl   edx, 16
+    mov   dx, OFFSET AmdCalloutRouterPost
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    mov   esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+    ; The structure has been initialized.  Now modify the default settings as desired.
+
+    mov   edi, esi
+    add   edi, SIZEOF AMD_CONFIG_PARAMS
+    call  oemPlatformConfigInit
+
+    ; Call in to the AmdInitEnv entry point
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    ;;  EAX = AGESA_STATUS
+    ;;  AGESA_SUCCESS The function has completed successfully.
+    ;;  AGESA_ERROR The artifact data could not be found or the host
+    ;;  environment failed to allocate sufficient buffer space.
+
+    .if (eax != AGESA_SUCCESS)
+        mov   al, (AMD_ENV_PARAMS ptr [esi]).StdHeader.HeapStatus
+        mov   ebx, AGESA_B2_ADDRESS
+        call  AmdProcessAgesaErrors
+    .endif
+
+    ; Allow AGESA to free the space used by AmdInitEnv
+    pop   esi
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+    call  AmdBridge32
+
+
+    popad
+    ret
+AmdInitEnvWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdInitMidWrapper
+;
+;   Entry:
+;     On Entry to "AmdInitMid" AGESA will display AGESA_TESTPOINT - CAh
+;     DS - 0000 with 4 gigabyte access
+;     ES - 0000 with 4 gigabyte access
+;
+;   Exit:
+;     On Exit from "AmdInitMid" AGESA will display AGESA_TESTPOINT - CBh
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     This procedure call performs special configuration requirements for
+;     the graphics display hardware.
+;
+;     These actions are performed by the BSP. The APs are not assigned any
+;     tasks at this time point.
+;
+;   Dependencies:
+;     This procedure must be called after PCI enumeration has allocated
+;     resources, but before the video BIOS call is performed.
+;
+;     This procedure requires a stack. The host environment must use one
+;     of the provided service functions to establish the stack environment
+;     prior to making the call to this procedure.
+;
+AmdInitMidWrapper PROC NEAR PUBLIC
+    local localCfgBlock:AMD_INTERFACE_PARAMS
+
+    pushad
+
+    ; Prepare for the call to create and initialize the input parameters for AmdInitMid
+    xor   eax, eax
+    mov   ax, ss
+    shl   eax, 4
+    lea   esi, localCfgBlock
+    add   esi, eax
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+    mov   edx, SEG AmdCallout16
+    shl   edx, 4
+    add   edx, OFFSET AmdCallout16
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_MID
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+    push  esi
+    mov   dx, SEG AmdCalloutRouterPost
+    shl   edx, 16
+    mov   dx, OFFSET AmdCalloutRouterPost
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    mov   esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+    ; The structure has been initialized.  Now modify the default settings as desired.
+
+    mov   edi, esi
+    add   edi, SIZEOF AMD_CONFIG_PARAMS
+    call  oemPlatformConfigInit
+
+    ; Call in to the AmdInitMid entry point
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    ;;  EAX = AGESA_STATUS
+    ;;  AGESA_SUCCESS The function has completed successfully.
+
+    .if (eax != AGESA_SUCCESS)
+        mov   al, (AMD_MID_PARAMS ptr [esi]).StdHeader.HeapStatus
+        mov   ebx, AGESA_B2_ADDRESS
+        call  AmdProcessAgesaErrors
+    .endif
+
+    ; Allow AGESA to free the space used by AmdInitMid
+    pop   esi
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+    call  AmdBridge32
+
+
+    popad
+    ret
+
+AmdInitMidWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdInitLateWrapper
+;
+;   Entry:
+;     On Entry to "AmdInitLate" AGESA will display AGESA_TESTPOINT - CCh
+;     DS - 0000 with 4 gigabyte access
+;     ES - 0000 with 4 gigabyte access
+;
+;   Exit:
+;     On Exit from "AmdInitLate" AGESA will display AGESA_TESTPOINT - CDh
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     The main purpose of this function is to generate informational
+;     data tables used by the operating system. The individual tables
+;     can be selected for generation through the user selection entries
+;     on the input parameters.
+;
+;     This routine uses the Call-Out AgesaAllocateBuffer to allocate a
+;     buffer of the proper size to contain the data.
+;
+;     The code path separates the BSP from the APs and perform a separate
+;     and appropriate list of tasks for each class of core.
+;     For the BSP, the following actions are performed:
+;       Allocate buffer space for the tables.
+;       Generate the table contents.
+;       Make sure that the CPU is in a known good power state before
+;       proceeding to boot the OS.
+;     For the APs, the following actions are performed:
+;       Final register settings preparing for entry to OS.
+;       Establish the final PState for entry to OS.
+;
+;   Dependencies:
+;     This routine is expected to be executed late in the boot sequence
+;     after main memory has been initialized, after PCI enumeration has
+;     completed, after the host environment ACPI sub-system has started,
+;     after the host environment has taken control of the APs, but just
+;     before the start of OS boot.
+;
+;     The host environment must provide the required call-outs listed in
+;     the "Required Call-Out Procedures" section of the AGESA interface
+;     specification to provide the buffer space in main memory and execute
+;     code on the APs. The host environment must register the created ACPI
+;     table in the main ACPI pointer tables. This may require moving the
+;     generated tables to another location in memory.
+;
+;     This procedure requires a stack. The host environment must establish
+;     the stack environment prior to making the call to this procedure.
+;     Some functions depend upon the preservation of the heap data across
+;     the shift from pre-memory environment to a post-memory environment.
+;     If that data was not preserved, then those functions cannot complete
+;     and an error is returned.
+;
+AmdInitLateWrapper PROC NEAR PUBLIC
+    local localCfgBlock:AMD_INTERFACE_PARAMS
+
+    pushad
+
+    ; Prepare for the call to create and initialize the input parameters for AmdInitLate
+    xor   eax, eax
+    mov   ax, ss
+    shl   eax, 4
+    lea   esi, localCfgBlock
+    add   esi, eax
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+    mov   edx, SEG AmdCallout16
+    shl   edx, 4
+    add   edx, OFFSET AmdCallout16
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_LATE
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+    push  esi
+    mov   dx, SEG AmdCalloutRouterPost
+    shl   edx, 16
+    mov   dx, OFFSET AmdCalloutRouterPost
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    mov   esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+    ; The structure has been initialized.  Now modify the default settings as desired.
+
+    mov   edi, esi
+    add   edi, SIZEOF AMD_CONFIG_PARAMS
+    call  oemPlatformConfigInit
+
+    ; Call in to the AmdInitLate entry point
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    ;;  EAX = AGESA_STATUS
+    ;;  AGESA_SUCCESS The function has completed successfully.
+    ;;  AGESA_ALERT
+    ;;  AGESA_ERROR The system could not allocate the needed amount of
+    ;;  buffer space; or could not locate the artifact data block in
+    ;;  memory. Likely cause: the host environment may not have preserved
+    ;;  the data properly.
+
+    .if (eax != AGESA_SUCCESS)
+        mov   al, (AMD_LATE_PARAMS ptr [esi]).StdHeader.HeapStatus
+        mov   ebx, AGESA_B2_ADDRESS
+        call  AmdProcessAgesaErrors
+    .endif
+
+    push  es
+    mov   ax, SEG AmdAcpiSratPointer
+    mov   es, ax
+
+    mov   ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSrat
+    mov   es:AmdAcpiSratPointer, ebx
+    mov   eax, DWORD PTR [ebx + 4]
+    mov   es:AmdAcpiSratSize, eax
+
+    mov   ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSlit
+    mov   es:AmdAcpiSlitPointer, ebx
+    mov   eax, DWORD PTR [ebx + 4]
+    mov   es:AmdAcpiSlitSize, eax
+
+    mov   ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiPState
+    mov   es:AmdAcpiSsdtPointer, ebx
+    mov   eax, DWORD PTR [ebx + 4]
+    mov   es:AmdAcpiSsdtSize, eax
+
+    xor   eax, eax
+
+    mov   ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce
+    mov   es:AmdAcpiWheaMcePointer, ebx
+    mov   ax, WORD PTR [ebx]
+    mov   es:AmdAcpiWheaMceSize, eax
+
+    mov   ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce
+    mov   es:AmdAcpiWheaCmcPointer, ebx
+    mov   ax, WORD PTR [ebx]
+    mov   es:AmdAcpiWheaCmcSize, eax
+
+    mov   eax, (AMD_LATE_PARAMS ptr [esi]).DmiTable
+    mov   es:AmdDmiInfoPointer, eax
+    pop   es
+
+
+    ; Allow AGESA to free the space used by AmdInitLate
+    pop   esi
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+    call  AmdBridge32
+
+    popad
+    ret
+
+AmdInitLateWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdS3SaveWrapper
+;
+;   Entry:
+;     On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CEh
+;     DS - 0000 with 4 gigabyte access
+;     ES - 0000 with 4 gigabyte access
+;
+;   Exit:
+;     On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CFh
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     This procedure saves critical registers and/or configuration
+;     information for preservation across a system suspend mode. All
+;     actions needed to prepare the processor for suspend mode is
+;     performed, however this procedure does NOT initiate the suspend
+;     process. The host environment is expected to perform that duty.
+;
+;     These actions are performed by the BSP. The APs are not assigned
+;     any tasks at this time point.
+;
+;     The initializer routine will NULL out the save area pointers and
+;     sizes. This procedure will determine the size of storage needed
+;     for all the processor context, and make a call out to the environment
+;     for allocation of one buffer to store all of the data. Upon exit, the
+;     pointers and sizes within the AMD_S3_PARAMS structure will be updated
+;     with the appropriate addresses within the buffer that was allocated.
+;     The host environment is expected to then transfer the data pointed to
+;     by NvStorage to a non-volatile storage area, and the data pointed to
+;     by VolatileStorage to either a non-volatile storage area or system
+;     RAM that retains its content across suspend.
+;
+;   Dependencies:
+;     The host environment must initiate the suspend process.
+;
+;     This procedure requires a stack. The host environment must establish
+;     the stack environment prior to making the call to this procedure.
+;
+AmdS3SaveWrapper PROC NEAR PUBLIC
+    local localCfgBlock:AMD_INTERFACE_PARAMS
+
+    pushad
+
+    ; Prepare for the call to create and initialize the input parameters for AmdS3Save
+    xor   eax, eax
+    mov   ax, ss
+    shl   eax, 4
+    lea   esi, localCfgBlock
+    add   esi, eax
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+    mov   edx, SEG AmdCallout16
+    shl   edx, 4
+    add   edx, OFFSET AmdCallout16
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3_SAVE
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+    push  esi
+    mov   dx, SEG AmdCalloutRouterPost
+    shl   edx, 16
+    mov   dx, OFFSET AmdCalloutRouterPost
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    mov   esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+    ; The structure has been initialized.  Now modify the default settings as desired.
+
+    mov   edi, esi
+    add   edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS)
+    call  oemPlatformConfigInit
+
+    ; Call in to the AmdS3Save entry point
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    ;;  EAX = AGESA_STATUS
+    ;;  AGESA_SUCCESS All suspend duties have been completed successfully.
+
+    .if (eax != AGESA_SUCCESS)
+        mov   al, (AMD_S3SAVE_PARAMS ptr [esi]).StdHeader.HeapStatus
+        mov   ebx, AGESA_B2_ADDRESS
+        call  AmdProcessAgesaErrors
+    .endif
+
+    mov   ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorageSize
+    .if (ecx != 0)
+        mov   ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorage
+        call  mySaveNonVolatileS3Context
+    .endif
+
+    mov   ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize
+    .if (ecx != 0)
+        mov   ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage
+        call  mySaveVolatileS3Context
+    .endif
+
+    ; Allow AGESA to free the space used by AmdS3Save
+    pop   esi
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+    call  AmdBridge32
+
+    popad
+    ret
+
+AmdS3SaveWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdS3LateRestoreWrapper
+;
+;   Entry:
+;     On Entry to "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D2h
+;     DS - 0000 with 4 gigabyte access
+;     ES - 0000 with 4 gigabyte access
+;
+;   Exit:
+;     On Exit from "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D3h
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     This procedure restores the processor state, reloads critical
+;     silicon component registers, and performs any re-initialization
+;     required by the silicon. This procedure will use the context data
+;     in the VolatileStorage area of the input structure to restore the
+;     processor registers.
+;
+;     The host environment must fill the AMD_S3_PARAMS NvStorage and
+;     VolatileStorage pointers and related size elements to describe
+;     the location of the context data. Note that for this procedure,
+;     the two data areas do not need to be contained in one buffer zone,
+;     they can be anywhere in the accessible memory address space. If
+;     the host environment uses a non-volatile storage device accessed
+;     on the system address bus such as flashROM, then the context data
+;     does not need to be moved prior to this call. If the host
+;     environment uses a non-volatile storage device not located on the
+;     system address bus (e.g. CMOS or SSEPROM) then the host environment
+;     must transfer the context data to a buffer in main memory prior to
+;     calling this procedure.
+;
+;     These actions are performed by the BSP. The APs are not assigned
+;     any tasks at this time point.
+;
+;   Dependencies:
+;     This procedure is called late in the resume sequence, after the
+;     PCI control space is restored and just before resuming operating
+;     system execution.
+;
+;     The host environment must initiate the OS restart process.
+;
+;     This procedure requires a stack. The host environment must establish
+;     the stack environment prior to making the call to this procedure.
+;
+AmdS3LateRestoreWrapper PROC NEAR PUBLIC
+    local localCfgBlock:AMD_INTERFACE_PARAMS
+
+    pushad
+
+    ; Prepare for the call to create and initialize the input parameters for AmdS3LateRestore
+    xor   eax, eax
+    mov   ax, ss
+    shl   eax, 4
+    lea   esi, localCfgBlock
+    add   esi, eax
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+    mov   edx, SEG AmdCallout16
+    shl   edx, 4
+    add   edx, OFFSET AmdCallout16
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3LATE_RESTORE
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+    push  esi
+    mov   dx, SEG AmdCalloutRouterPost
+    shl   edx, 16
+    mov   dx, OFFSET AmdCalloutRouterPost
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    mov   esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+    ; The structure has been initialized.  Now modify the default settings as desired.
+
+    mov   edi, esi
+    add   edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS)
+    call  oemPlatformConfigInit
+
+    call  myGetVolatileS3Context
+    mov   (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage, ebx
+    mov   (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize, ecx
+
+    ; Call in to the AmdS3LateRestore entry point
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    ;;  EAX = AGESA_STATUS
+    ;;  AGESA_SUCCESS All resume processes have been completed successfully.
+
+    .if (eax != AGESA_SUCCESS)
+        mov   al, (AMD_S3LATE_PARAMS ptr [esi]).StdHeader.HeapStatus
+        mov   ebx, AGESA_B2_ADDRESS
+        call  AmdProcessAgesaErrors
+    .endif
+
+    ; Allow AGESA to free the space used by AmdS3LateRestore
+    pop   esi
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+    call  AmdBridge32
+
+    popad
+    ret
+AmdS3LateRestoreWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdLateRunApTaskWrapper
+;
+;   Entry:
+;     Prior to this hook, AGESA will display - AGESA_TESTPOINT - D4h
+;     DS - 0000 with 4 gigabyte access
+;     ES - 0000 with 4 gigabyte access
+;
+;   Exit:
+;     After this hook, AGESA will display - AGESA_TESTPOINT - D5h
+;     None
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     This entry point is tightly connected with the "AgesaRunFcnOnAp"
+;     call out.  The AGESA software will call the call-out "AgesaRunFcnOnAp";
+;     the host environment will then call this entry point to have the AP
+;     execute the requested function. This is needed late in the Post and
+;     Resume branches for running an AP task since the AGESA software has
+;     relinquished control of the APs to the host environment.
+;
+;   Dependencies:
+;     The host environment must implement the"AgesaRunFcnOnAp" call-out
+;     and route execution to the target AP.
+;
+AmdLateRunApTaskWrapper PROC NEAR PUBLIC
+    local localCfgBlock:AMD_INTERFACE_PARAMS
+
+    pushad
+
+    ; Prepare for the call to create and initialize the input parameters for AmdLateRunApTask
+    xor   eax, eax
+    mov   ax, ss
+    shl   eax, 4
+    lea   esi, localCfgBlock
+    add   esi, eax
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+    mov   edx, SEG AmdCallout16
+    shl   edx, 4
+    add   edx, OFFSET AmdCallout16
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_LATE_RUN_AP_TASK
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+    push  esi
+    mov   dx, SEG AmdCalloutRouterPost
+    shl   edx, 16
+    mov   dx, OFFSET AmdCalloutRouterPost
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    mov   esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+    ; The structure has been initialized.  Now modify the default settings as desired.
+
+    push  es
+    mov   ax, SEG AmdRunCodeOnApDataPointer
+    mov   es, ax
+    mov   eax, es:AmdRunCodeOnApDataPointer
+    mov   (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock, eax
+    mov   eax, es:AmdRunCodeOnApDataSize
+    mov   (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength, eax
+    mov   eax, es:AmdRunCodeOnApFunction
+    mov   (AP_EXE_PARAMS PTR [esi]).FunctionNumber, eax
+    pop   es
+
+    ; Call in to the AmdLateRunApTask dispatcher
+    push  edx
+    call  AmdBridge32
+    pop   edx
+
+    ;;  EAX = AGESA_STATUS
+    push  es
+    mov   bx, SEG AmdRunCodeOnApStatus
+    mov   es, bx
+    mov   es:AmdRunCodeOnApStatus, eax
+    pop   es
+
+    ; Allow AGESA to free the space used by AmdLateRunApTask
+    pop   esi
+    mov   (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+    call  AmdBridge32
+
+    popad
+    ret
+
+AmdLateRunApTaskWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdRunFuncOnAp (Required)
+;
+;   Entry:
+;     Prior to this hook, AGESA will display - AGESA_TESTPOINT - E8h
+;     EDX - Local APIC ID of the target core.
+;     ESI - Pointer to an AP_EXE_PARAMS structure.
+;
+;           typedef struct {
+;             IN OUT   AMD_CONFIG_PARAMS StdHeader;
+;             IN       UINT32 FunctionNumber;
+;             IN       VOID *RelatedDataBlock;
+;             IN       UINT32 RelatedDataBlockLength;
+;           } AP_EXE_PARAMS;
+;
+;   Exit:
+;     After this hook, AGESA will display - AGESA_TESTPOINT - E9h
+;     EAX - Contains the AGESA_STATUS return code.
+;           AGESA_SUCCESS The function has completed successfully.
+;           AGESA_UNSUPPORTED This is a required function, so this value
+;                             being returned causes a critical error
+;                             response value from the AGESAT software
+;                             function and no memory initialized.
+;           AGESA_WARNING The AP did not respond.
+;
+;   Modified:
+;     EAX
+;
+;   Purpose:
+;     This function is used after main memory has been initialized
+;     and the host environment has taken control of AP task dispatching.
+;     This function must cause the indicated function code to be executed
+;     upon the specified Application Processor. This procedure must be
+;     executed in 32-bit mode. This function is required to be implemented
+;     in the host environment.
+;
+;   Dependencies:
+;     The host environment must route execution to the target AP and
+;     have that AP call the"AmdLateRunApTask" entry point.
+;
+AmdRunFuncOnAp PROC NEAR PUBLIC
+
+    push  es
+    mov   ax, SEG AmdRunCodeOnApDataPointer
+    mov   es, ax
+    mov   eax, (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock
+    mov   es:AmdRunCodeOnApDataPointer, eax
+    mov   eax, (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength
+    mov   es:AmdRunCodeOnApDataSize, eax
+    mov   eax, (AP_EXE_PARAMS PTR [esi]).FunctionNumber
+    mov   es:AmdRunCodeOnApFunction, eax
+    mov   eax, AGESA_UNSUPPORTED
+    mov   es:AmdRunCodeOnApStatus, eax
+    pop   es
+
+    call  myRunFuncOnAp
+
+    push  es
+    mov   ax, SEG AmdRunCodeOnApStatus
+    mov   es, ax
+    mov   eax, es:AmdRunCodeOnApStatus
+    pop   es
+    ret
+AmdRunFuncOnAp ENDP
+
+
+
+;+---------------------------------------------------------------------------
+;
+;   AmdCalloutRouterPost
+;
+;   Entry:
+;     ECX - Callout function number
+;     EDX - Function-specific UINTN
+;     ESI - Pointer to function specific data
+;
+;   Exit:
+;     EAX - Contains the AGESA_STATUS return code.
+;
+;   Modified:
+;     None
+;
+;   Purpose:
+;     The call out router function for AmdInitEnv,
+;     AmdInitMid, AmdInitLate, AmdS3Save, and
+;     AmdS3LateRestore.
+;
+;   Dependencies:
+;     None
+;
+AmdCalloutRouterPost PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES
+    xor   ax, ax
+    mov   ds, ax
+    mov   es, ax
+    lea   di, cs:CalloutRouterTablePost
+    mov   eax, AGESA_UNSUPPORTED
+
+loopThruTable:
+    cmp   di, OFFSET cs:CalloutRouterTablePostEnd
+    jae   amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED
+    cmp   ecx, cs:[di].sOemCallout.FuncName
+    je    FoundMatch
+    add   di, SIZEOF sOemCallout
+    jmp   loopThruTable
+
+FoundMatch:
+    mov   bx, cs:[di].sOemCallout.FuncPtr
+    call  bx
+
+amdCpuCalloutExit:
+    ret
+AmdCalloutRouterPost ENDP
+
+
+;----------------------------------------------------------------------------
+; Define the callout dispatch table for the POST segment
+;----------------------------------------------------------------------------
+
+CalloutRouterTablePost LABEL BYTE
+    ;; Add entries as desired.
+    sOemCallout <AGESA_ALLOCATE_BUFFER, OFFSET myAllocateBuffer>
+    sOemCallout <AGESA_DEALLOCATE_BUFFER, OFFSET myDeallocateBuffer>
+    sOemCallout <AGESA_LOCATE_BUFFER, OFFSET myLocateBuffer>
+    sOemCallout <AGESA_RUNFUNC_ONAP, OFFSET AmdRunFuncOnAp>
+CalloutRouterTablePostEnd LABEL BYTE
+
+AMD_POST_END
+
+
+;----------------------------------------------------------------------------
+;    CPU DATA SEGMENT
+; This segment must be writable, and present at the time that
+; AmdInitLate is run.
+;----------------------------------------------------------------------------
+
+CPU_DATASEG_START
+
+  ;; Data used to store pointers for later use by the host environment.
+  PUBLIC AmdAcpiSratPointer
+  PUBLIC AmdAcpiSratSize
+  PUBLIC AmdAcpiSlitPointer
+  PUBLIC AmdAcpiSlitSize
+  PUBLIC AmdAcpiSsdtPointer
+  PUBLIC AmdAcpiSsdtSize
+  PUBLIC AmdAcpiWheaMcePointer
+  PUBLIC AmdAcpiWheaMceSize
+  PUBLIC AmdAcpiWheaCmcPointer
+  PUBLIC AmdAcpiWheaCmcSize
+  PUBLIC AmdDmiInfoPointer
+  AmdAcpiSratPointer     DWORD ?
+  AmdAcpiSratSize        DWORD ?
+  AmdAcpiSlitPointer     DWORD ?
+  AmdAcpiSlitSize        DWORD ?
+  AmdAcpiSsdtPointer     DWORD ?
+  AmdAcpiSsdtSize        DWORD ?
+  AmdAcpiWheaMcePointer  DWORD ?
+  AmdAcpiWheaMceSize     DWORD ?
+  AmdAcpiWheaCmcPointer  DWORD ?
+  AmdAcpiWheaCmcSize     DWORD ?
+  AmdDmiInfoPointer      DWORD ?
+
+  ;; Data used for communication between the AP and the BSP.
+  PUBLIC AmdRunCodeOnApDataPointer
+  PUBLIC AmdRunCodeOnApDataSize
+  PUBLIC AmdRunCodeOnApFunction
+  PUBLIC AmdRunCodeOnApStatus
+  AmdRunCodeOnApDataPointer  DWORD ?
+  AmdRunCodeOnApDataSize     DWORD ?
+  AmdRunCodeOnApFunction     DWORD ?
+  AmdRunCodeOnApStatus       DWORD ?
+
+CPU_DATASEG_END
+
+
+END
diff --git a/src/vendorcode/amd/agesa/f15/Legacy/Proc/hobTransfer.c b/src/vendorcode/amd/agesa/f15/Legacy/Proc/hobTransfer.c
new file mode 100644
index 0000000000..f4482edc8c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Legacy/Proc/hobTransfer.c
@@ -0,0 +1,393 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Hob Transfer functions.
+ *
+ * Contains code that copy Heap to temp memory or main memory.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56322 $   @e \$Date: 2011-07-11 16:51:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuCacheInit.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "cpuLateInit.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE LEGACY_PROC_HOBTRANSFER_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          P U B L I C     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  CopyHeapToTempRamAtPost
+ *
+ *     This function copies BSP heap content to RAM
+ *
+ *    @param[in,out]   StdHeader   - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ *    @retval          AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+CopyHeapToTempRamAtPost (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 *BaseAddressInCache;
+  UINT8 *BaseAddressInTempMem;
+  UINT8 *Source;
+  UINT8 *Destination;
+  UINT8  AlignTo16ByteInCache;
+  UINT8  AlignTo16ByteInTempMem;
+  UINT8  Ignored;
+  UINT32 SizeOfNodeData;
+  UINT32 TotalSize;
+  UINT32 HeapRamFixMtrr;
+  UINT32 HeapRamVariableMtrr;
+  UINT32 HeapInCacheOffset;
+  UINT64 MsrData;
+  UINT64 VariableMtrrBase;
+  UINT64 VariableMtrrMask;
+  UINTN  AmdHeapRamAddress;
+  AGESA_STATUS IgnoredStatus;
+  BUFFER_NODE *HeapInCache;
+  BUFFER_NODE *HeapInTempMem;
+  HEAP_MANAGER *HeapManagerInCache;
+  HEAP_MANAGER *HeapManagerInTempMem;
+  CACHE_INFO *CacheInfoPtr;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  AmdHeapRamAddress = (UINTN) UserOptions.CfgHeapDramAddress;
+  //
+  //If the user define address above 1M, Mem Init has already set
+  //whole available memory as WB cacheable.
+  //
+  if (AmdHeapRamAddress < 0x100000) {
+    // Region below 1MB
+    // Fixed MTTR region
+    // turn on modification bit
+    LibAmdMsrRead (MSR_SYS_CFG, &MsrData, StdHeader);
+    MsrData |= 0x80000;
+    LibAmdMsrWrite (MSR_SYS_CFG, &MsrData, StdHeader);
+
+    if (AmdHeapRamAddress >= 0xC0000) {
+      //
+      // 0xC0000 ~ 0xFFFFF
+      //
+      HeapRamFixMtrr = (UINT32) (AMD_MTRR_FIX4k_C0000 + (((AmdHeapRamAddress >> 16) & 0x3) * 2));
+      MsrData = AMD_MTRR_FIX4K_UC_DRAM;
+      LibAmdMsrWrite (HeapRamFixMtrr, &MsrData, StdHeader);
+      LibAmdMsrWrite ((HeapRamFixMtrr + 1), &MsrData, StdHeader);
+    } else if (AmdHeapRamAddress >= 0x80000) {
+      //
+      // 0x80000~0xBFFFF
+      //
+      HeapRamFixMtrr = (UINT32) (AMD_MTRR_FIX16k_80000 + ((AmdHeapRamAddress >> 17) & 0x1));
+      MsrData = AMD_MTRR_FIX16K_UC_DRAM;
+      LibAmdMsrWrite (HeapRamFixMtrr, &MsrData, StdHeader);
+    } else {
+      //
+      // 0x0 ~ 0x7FFFF
+      //
+      LibAmdMsrRead (AMD_MTRR_FIX64k_00000, &MsrData, StdHeader);
+      MsrData = MsrData & (~(0xFF << (8 * ((AmdHeapRamAddress >> 16) & 0x7))));
+      MsrData = MsrData | (AMD_MTRR_FIX64K_UC_DRAM << (8 * ((AmdHeapRamAddress >> 16) & 0x7)));
+      LibAmdMsrWrite (AMD_MTRR_FIX64k_00000, &MsrData, StdHeader);
+    }
+
+    // Turn on MTTR enable bit and turn off modification bit
+    LibAmdMsrRead (MSR_SYS_CFG, &MsrData, StdHeader);
+    MsrData |= 0x40000;
+    MsrData &= 0xFFFFFFFFFFF7FFFF;
+    LibAmdMsrWrite (MSR_SYS_CFG, &MsrData, StdHeader);
+  } else {
+    // Region above 1MB
+    // Variable MTTR region
+    // Get family specific cache Info
+    GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+    FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &Ignored, StdHeader);
+
+    // Find an empty MTRRphysBase/MTRRphysMask
+    for (HeapRamVariableMtrr = AMD_MTRR_VARIABLE_HEAP_BASE;
+         HeapRamVariableMtrr >= AMD_MTRR_VARIABLE_BASE0;
+         HeapRamVariableMtrr--) {
+      LibAmdMsrRead (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader);
+      LibAmdMsrRead ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader);
+      if ((VariableMtrrBase == 0) && (VariableMtrrMask == 0)) {
+        break;
+      }
+    }
+    if (HeapRamVariableMtrr < AMD_MTRR_VARIABLE_BASE0) {
+      // All variable MTRR is used.
+      ASSERT (FALSE);
+    }
+
+    // Set variable MTRR base and mask
+    // If the address ranges of two or more MTRRs overlap
+    // and if at least one of the memory types is UC, the UC memory type is used.
+    VariableMtrrBase = (UINT64) (AmdHeapRamAddress & CacheInfoPtr->HeapBaseMask);
+    VariableMtrrMask = CacheInfoPtr->VariableMtrrHeapMask & AMD_HEAP_MTRR_MASK;
+    LibAmdMsrWrite (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader);
+    LibAmdMsrWrite ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader);
+  }
+  // Copying Heap content
+  if (IsBsp (StdHeader, &IgnoredStatus)) {
+    TotalSize = sizeof (HEAP_MANAGER);
+    SizeOfNodeData = 0;
+    AlignTo16ByteInTempMem = 0;
+    BaseAddressInCache = (UINT8 *) StdHeader->HeapBasePtr;
+    HeapManagerInCache = (HEAP_MANAGER *) BaseAddressInCache;
+    HeapInCacheOffset = HeapManagerInCache->FirstActiveBufferOffset;
+    HeapInCache = (BUFFER_NODE *) (BaseAddressInCache + HeapInCacheOffset);
+
+    BaseAddressInTempMem = (UINT8 *) UserOptions.CfgHeapDramAddress;
+    HeapManagerInTempMem = (HEAP_MANAGER *) BaseAddressInTempMem;
+    HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize);
+
+    // copy heap from cache to temp memory.
+    // only heap with persist great than HEAP_LOCAL_CACHE will be copied.
+    // Note: Only copy heap with persist greater than HEAP_LOCAL_CACHE.
+    while (HeapInCacheOffset != AMD_HEAP_INVALID_HEAP_OFFSET) {
+      if (HeapInCache->Persist > HEAP_LOCAL_CACHE) {
+        AlignTo16ByteInCache = HeapInCache->PadSize;
+        AlignTo16ByteInTempMem = (UINT8) ((0x10 - (((UINTN) (VOID *) HeapInTempMem + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL) & 0xF)) & 0xF);
+        SizeOfNodeData = HeapInCache->BufferSize - AlignTo16ByteInCache;
+        TotalSize = (UINT32) (TotalSize  + sizeof (BUFFER_NODE) + SizeOfNodeData + AlignTo16ByteInTempMem);
+        Source = (UINT8 *) HeapInCache + sizeof (BUFFER_NODE) + AlignTo16ByteInCache;
+        Destination = (UINT8 *) HeapInTempMem + sizeof (BUFFER_NODE) + AlignTo16ByteInTempMem;
+        LibAmdMemCopy  (HeapInTempMem, HeapInCache, sizeof (BUFFER_NODE), StdHeader);
+        LibAmdMemCopy  (Destination, Source, SizeOfNodeData, StdHeader);
+        HeapInTempMem->OffsetOfNextNode = TotalSize;
+        HeapInTempMem->BufferSize = SizeOfNodeData + AlignTo16ByteInTempMem;
+        HeapInTempMem->PadSize = AlignTo16ByteInTempMem;
+        HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize);
+      }
+      HeapInCacheOffset = HeapInCache->OffsetOfNextNode;
+      HeapInCache = (BUFFER_NODE *) (BaseAddressInCache + HeapInCacheOffset);
+    }
+    // initialize heap manager
+    if (TotalSize == sizeof (HEAP_MANAGER)) {
+      // heap is empty
+      HeapManagerInTempMem->UsedSize = sizeof (HEAP_MANAGER);
+      HeapManagerInTempMem->FirstActiveBufferOffset = AMD_HEAP_INVALID_HEAP_OFFSET;
+      HeapManagerInTempMem->FirstFreeSpaceOffset = sizeof (HEAP_MANAGER);
+    } else {
+      // heap is NOT empty
+      HeapManagerInTempMem->UsedSize = TotalSize;
+      HeapManagerInTempMem->FirstActiveBufferOffset = sizeof (HEAP_MANAGER);
+      HeapManagerInTempMem->FirstFreeSpaceOffset = TotalSize;
+      HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize - SizeOfNodeData - AlignTo16ByteInTempMem - sizeof (BUFFER_NODE));
+      HeapInTempMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+      HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize);
+    }
+    // heap signature
+    HeapManagerInCache->Signature = 0x00000000;
+    HeapManagerInTempMem->Signature = HEAP_SIGNATURE_VALID;
+    // Free space node
+    HeapInTempMem->BufferSize = (UINT32) (AMD_HEAP_SIZE_PER_CORE - TotalSize);
+    HeapInTempMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+  }
+  return AGESA_SUCCESS;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  CopyHeapToMainRamAtPost
+ *
+ *    This function copies Temp Ram heap content to Main Ram
+ *
+ *    @param[in,out]   StdHeader   - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ *    @retval          AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+CopyHeapToMainRamAtPost (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 *BaseAddressInTempMem;
+  UINT8 *BaseAddressInMainMem;
+  UINT8 *Source;
+  UINT8 *Destination;
+  UINT8  AlignTo16ByteInTempMem;
+  UINT8  AlignTo16ByteInMainMem;
+  UINT8  Ignored;
+  UINT32 SizeOfNodeData;
+  UINT32 TotalSize;
+  UINT32 HeapInTempMemOffset;
+  UINT32 HeapRamVariableMtrr;
+  UINT64 VariableMtrrBase;
+  UINT64 VariableMtrrMask;
+  AGESA_STATUS IgnoredStatus;
+  BUFFER_NODE *HeapInTempMem;
+  BUFFER_NODE *HeapInMainMem;
+  HEAP_MANAGER *HeapManagerInTempMem;
+  HEAP_MANAGER *HeapManagerInMainMem;
+  AGESA_BUFFER_PARAMS AgesaBuffer;
+  CACHE_INFO *CacheInfoPtr;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  if (IsBsp (StdHeader, &IgnoredStatus)) {
+    TotalSize = sizeof (HEAP_MANAGER);
+    SizeOfNodeData = 0;
+    AlignTo16ByteInMainMem = 0;
+    BaseAddressInTempMem = (UINT8 *) StdHeader->HeapBasePtr;
+    HeapManagerInTempMem = (HEAP_MANAGER *) StdHeader->HeapBasePtr;
+    HeapInTempMemOffset = HeapManagerInTempMem->FirstActiveBufferOffset;
+    HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + HeapInTempMemOffset);
+
+    AgesaBuffer.StdHeader = *StdHeader;
+    AgesaBuffer.BufferHandle = AMD_HEAP_IN_MAIN_MEMORY_HANDLE;
+    AgesaBuffer.BufferLength = AMD_HEAP_SIZE_PER_CORE;
+    if (AgesaAllocateBuffer (0, &AgesaBuffer) != AGESA_SUCCESS) {
+      return AGESA_ERROR;
+    }
+    BaseAddressInMainMem = (UINT8 *) AgesaBuffer.BufferPointer;
+    HeapManagerInMainMem = (HEAP_MANAGER *) BaseAddressInMainMem;
+    HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize);
+    LibAmdMemFill (BaseAddressInMainMem, 0x00, AMD_HEAP_SIZE_PER_CORE, StdHeader);
+    // copy heap from temp memory to main memory.
+    // only heap with persist great than HEAP_TEMP_MEM will be copied.
+    // Note: Only copy heap buffers with persist greater than HEAP_TEMP_MEM.
+    while (HeapInTempMemOffset != AMD_HEAP_INVALID_HEAP_OFFSET) {
+      if (HeapInTempMem->Persist > HEAP_TEMP_MEM) {
+        AlignTo16ByteInTempMem = HeapInTempMem->PadSize;
+        AlignTo16ByteInMainMem = (UINT8) ((0x10 - (((UINTN) (VOID *) HeapInMainMem  + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL) & 0xF)) & 0xF);
+        SizeOfNodeData = HeapInTempMem->BufferSize - AlignTo16ByteInTempMem;
+        TotalSize = (UINT32) (TotalSize  + sizeof (BUFFER_NODE) + SizeOfNodeData + AlignTo16ByteInMainMem);
+        Source = (UINT8 *) HeapInTempMem + sizeof (BUFFER_NODE) + AlignTo16ByteInTempMem;
+        Destination = (UINT8 *) HeapInMainMem + sizeof (BUFFER_NODE) + AlignTo16ByteInMainMem;
+        LibAmdMemCopy  (HeapInMainMem, HeapInTempMem, sizeof (BUFFER_NODE), StdHeader);
+        LibAmdMemCopy  (Destination, Source, SizeOfNodeData, StdHeader);
+        HeapInMainMem->OffsetOfNextNode = TotalSize;
+        HeapInMainMem->BufferSize = SizeOfNodeData + AlignTo16ByteInMainMem;
+        HeapInMainMem->PadSize = AlignTo16ByteInMainMem;
+        HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize);
+      }
+      HeapInTempMemOffset = HeapInTempMem->OffsetOfNextNode;
+      HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + HeapInTempMemOffset);
+    }
+    // initialize heap manager
+    if (TotalSize == sizeof (HEAP_MANAGER)) {
+      // heap is empty
+      HeapManagerInMainMem->UsedSize = sizeof (HEAP_MANAGER);
+      HeapManagerInMainMem->FirstActiveBufferOffset = AMD_HEAP_INVALID_HEAP_OFFSET;
+      HeapManagerInMainMem->FirstFreeSpaceOffset = sizeof (HEAP_MANAGER);
+    } else {
+      // heap is NOT empty
+      HeapManagerInMainMem->UsedSize = TotalSize;
+      HeapManagerInMainMem->FirstActiveBufferOffset = sizeof (HEAP_MANAGER);
+      HeapManagerInMainMem->FirstFreeSpaceOffset = TotalSize;
+      HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize - SizeOfNodeData - AlignTo16ByteInMainMem - sizeof (BUFFER_NODE));
+      HeapInMainMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+      HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize);
+    }
+    // heap signature
+    HeapManagerInTempMem->Signature = 0x00000000;
+    HeapManagerInMainMem->Signature = HEAP_SIGNATURE_VALID;
+    // Free space node
+    HeapInMainMem->BufferSize = AMD_HEAP_SIZE_PER_CORE - TotalSize;
+    HeapInMainMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+  }
+  // if address of heap in temp memory is above 1M, then we must used one variable MTRR.
+  if (StdHeader->HeapBasePtr >= 0x100000) {
+    // Find out which variable MTRR was used in CopyHeapToTempRamAtPost.
+    GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+    FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &Ignored, StdHeader);
+    for (HeapRamVariableMtrr = AMD_MTRR_VARIABLE_HEAP_BASE;
+         HeapRamVariableMtrr >= AMD_MTRR_VARIABLE_BASE0;
+         HeapRamVariableMtrr--) {
+      LibAmdMsrRead (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader);
+      LibAmdMsrRead ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader);
+      if ((VariableMtrrBase == (UINT64) (StdHeader->HeapBasePtr & CacheInfoPtr->HeapBaseMask)) &&
+          (VariableMtrrMask == (UINT64) (CacheInfoPtr->VariableMtrrHeapMask & AMD_HEAP_MTRR_MASK))) {
+        break;
+      }
+    }
+    if (HeapRamVariableMtrr >= AMD_MTRR_VARIABLE_BASE0) {
+      // Clear variable MTRR which set in CopyHeapToTempRamAtPost.
+      VariableMtrrBase = 0;
+      VariableMtrrMask = 0;
+      LibAmdMsrWrite (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader);
+      LibAmdMsrWrite ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader);
+    }
+  }
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Legacy/agesa.inc b/src/vendorcode/amd/agesa/f15/Legacy/agesa.inc
new file mode 100644
index 0000000000..617be484b0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Legacy/agesa.inc
@@ -0,0 +1,2989 @@
+; ****************************************************************************
+; *
+; * @file
+; *
+; * Agesa structures and definitions
+; *
+; * Contains AMD AGESA core interface
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  Include
+; * @e \$Revision: 60222 $   @e \$Date: 2011-10-10 23:39:36 -0600 (Mon, 10 Oct 2011) $
+;
+; ****************************************************************************
+; *
+; * Copyright (C) 2012 Advanced Micro Devices, Inc.
+; * All rights reserved.
+; *
+; * Redistribution and use in source and binary forms, with or without
+; * modification, are permitted provided that the following conditions are met:
+; *     * Redistributions of source code must retain the above copyright
+; *       notice, this list of conditions and the following disclaimer.
+; *     * Redistributions in binary form must reproduce the above copyright
+; *       notice, this list of conditions and the following disclaimer in the
+; *       documentation and/or other materials provided with the distribution.
+; *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+; *       its contributors may be used to endorse or promote products derived
+; *       from this software without specific prior written permission.
+; *
+; * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; *
+; *
+; **************************************************************************
+
+INCLUDE amd.inc
+UINT64    TEXTEQU     <QWORD>
+UINT32    TEXTEQU     <DWORD>
+UINT16    TEXTEQU     <WORD>
+UINT8     TEXTEQU     <BYTE>
+CHAR8     TEXTEQU     <BYTE>
+BOOLEAN   TEXTEQU     <BYTE>
+POINTER   TEXTEQU     <DWORD>
+
+ ; AGESA Types and Definitions
+
+
+
+ ; AGESA BASIC CALLOUTS
+    AGESA_MEM_RELEASE           EQU    00028000h
+
+ ; AGESA ADVANCED CALLOUTS, Processor
+    AGESA_CHECK_UMA             EQU    00028100h
+    AGESA_DO_RESET              EQU    00028101h
+    AGESA_ALLOCATE_BUFFER       EQU    00028102h
+    AGESA_DEALLOCATE_BUFFER     EQU    00028103h
+    AGESA_LOCATE_BUFFER         EQU    00028104h
+    AGESA_RUNFUNC_ONAP          EQU    00028105h
+
+ ; AGESA ADVANCED CALLOUTS, HyperTransport
+
+ ; AGESA ADVANCED CALLOUTS, Memory
+    AGESA_READ_SPD              EQU    00028140h
+    AGESA_HOOKBEFORE_DRAM_INIT  EQU    00028141h
+    AGESA_HOOKBEFORE_DQS_TRAINING       EQU    00028142h
+    AGESA_READ_SPD_RECOVERY     EQU    00028143h
+    AGESA_HOOKBEFORE_EXIT_SELF_REF      EQU    00028144h
+    AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY      EQU    00028145h
+    AGESA_EXTERNAL____TRAIN_VREF_CHANGE  EQU   00028146h
+
+ ; AGESA IDS CALLOUTS
+    AGESA_GET_IDS_INIT_DATA     EQU    00028200h
+
+ ; AGESA GNB CALLOUTS
+    AGESA_GNB_PCIE_SLOT_RESET   EQU    00028301h
+
+ ; AGESA FCH CALLOUTS
+    AGESA_FCH_OEM_CALLOUT       EQU    00028401h
+
+; ------------------------------------------------------------------------
+
+ ; HyperTransport Interface
+
+
+
+; -----------------------------------------------------------------------------
+                         ; HT DEFINITIONS AND MACROS
+
+; -----------------------------------------------------------------------------
+
+
+ ; Width equates for call backs
+    HT_WIDTH_8_BITS             EQU    8
+    HT_WIDTH_16_BITS            EQU    16
+    HT_WIDTH_4_BITS             EQU    4
+    HT_WIDTH_2_BITS             EQU    2
+    HT_WIDTH_NO_LIMIT           EQU    HT_WIDTH_16_BITS
+
+ ; Frequency Limit equates for call backs which take a frequency supported mask.
+    HT_FREQUENCY_LIMIT_200M     EQU    1
+    HT_FREQUENCY_LIMIT_400M     EQU    7
+    HT_FREQUENCY_LIMIT_600M     EQU    1Fh
+    HT_FREQUENCY_LIMIT_800M     EQU    3Fh
+    HT_FREQUENCY_LIMIT_1000M    EQU    7Fh
+    HT_FREQUENCY_LIMIT_HT1_ONLY EQU    7Fh
+    HT_FREQUENCY_LIMIT_1200M    EQU    0FFh
+    HT_FREQUENCY_LIMIT_1400M    EQU    1FFh
+    HT_FREQUENCY_LIMIT_1600M    EQU    3FFh
+    HT_FREQUENCY_LIMIT_1800M    EQU    7FFh
+    HT_FREQUENCY_LIMIT_2000M    EQU    0FFFh
+    HT_FREQUENCY_LIMIT_2200M    EQU    1FFFh
+    HT_FREQUENCY_LIMIT_2400M    EQU    3FFFh
+    HT_FREQUENCY_LIMIT_2600M    EQU    7FFFh
+    HT_FREQUENCY_LIMIT_2800M    EQU    27FFFh
+    HT_FREQUENCY_LIMIT_3000M    EQU    67FFFh
+    HT_FREQUENCY_LIMIT_3200M    EQU    0E7FFFh
+    HT_FREQUENCY_LIMIT_3600M    EQU    1E7FFFh
+    HT_FREQUENCY_LIMIT_MAX      EQU    HT_FREQUENCY_LIMIT_3600M
+    HT_FREQUENCY_NO_LIMIT       EQU    0FFFFFFFFh
+
+ ; Unit ID Clumping special values
+    HT_CLUMPING_DISABLE         EQU    00000000h
+    HT_CLUMPING_NO_LIMIT        EQU    0FFFFFFFFh
+
+    HT_LIST_TERMINAL            EQU    0FFh
+    HT_LIST_MATCH_ANY           EQU    0FEh
+    HT_LIST_MATCH_INTERNAL_LINK EQU    0FDh
+
+ ; Event Notify definitions
+
+ ; Event definitions.
+
+ ; Coherent subfunction events
+    HT_EVENT_COH_EVENTS         EQU    10001000h
+    HT_EVENT_COH_NO_TOPOLOGY    EQU    10011000h
+    HT_EVENT_COH_OBSOLETE000    EQU    10021000h
+    HT_EVENT_COH_PROCESSOR_TYPE_MIX     EQU    10031000h
+    HT_EVENT_COH_NODE_DISCOVERED        EQU    10041000h
+    HT_EVENT_COH_MPCAP_MISMATCH EQU    10051000h
+
+ ; Non-coherent subfunction events
+    HT_EVENT_NCOH_EVENTS        EQU    10002000h
+    HT_EVENT_NCOH_BUID_EXCEED   EQU    10012000h
+    HT_EVENT_NCOH_OBSOLETE000   EQU    10022000h
+    HT_EVENT_NCOH_BUS_MAX_EXCEED        EQU    10032000h
+    HT_EVENT_NCOH_CFG_MAP_EXCEED        EQU    10042000h
+    HT_EVENT_NCOH_DEVICE_FAILED EQU    10052000h
+    HT_EVENT_NCOH_AUTO_DEPTH    EQU    10062000h
+
+ ; Optimization subfunction events
+    HT_EVENT_OPT_EVENTS         EQU    10003000h
+    HT_EVENT_OPT_REQUIRED_CAP_RETRY     EQU    10013000h
+    HT_EVENT_OPT_REQUIRED_CAP_GEN3      EQU    10023000h
+    HT_EVENT_OPT_UNUSED_LINKS   EQU    10033000h
+    HT_EVENT_OPT_LINK_PAIR_EXCEED       EQU    10043000h
+
+ ; HW Fault events
+    HT_EVENT_HW_EVENTS          EQU    10004000h
+    HT_EVENT_HW_SYNCFLOOD       EQU    10014000h
+    HT_EVENT_HW_HTCRC           EQU    10024000h
+
+ ; The Recovery HT component uses 0x10005000 for events.
+ ; For consistency, we avoid that range here.
+
+    HT_MAX_NC_BUIDS             EQU    32
+; ----------------------------------------------------------------------------
+                         ; HT TYPEDEFS, STRUCTURES, ENUMS
+
+; ----------------------------------------------------------------------------
+MATCHED                 EQU     0               ; < The link matches the requested customization.
+POWERED_OFF             EQU     1               ; < Power the link off.
+UNMATCHED               EQU     2               ; < The link should be processed according to normal defaults.
+MaxFinalLinkState       EQU     3               ; < Not a final link state, use for limit checking.
+FINAL_LINK_STATE        TEXTEQU <DWORD>
+
+ ; Swap a device from its current id to a new one.
+
+BUID_SWAP_ITEM    STRUCT
+  FromId                        UINT8 ?         ; < The device responding to FromId,
+  ToId                          UINT8 ?         ; < will be moved to ToId.
+BUID_SWAP_ITEM    ENDS
+
+
+ ; Each Non-coherent chain may have a list of device swaps.  After performing the swaps,
+ ; the final in order list of device ids is provided. (There can be more swaps than devices.)
+ ; The unused entries in both are filled with 0xFF.
+
+BUID_SWAP_LIST    STRUCT
+  Swaps                         BUID_SWAP_ITEM (HT_MAX_NC_BUIDS) DUP ({})       ; < The BUID Swaps to perform
+  FinalIds                      UINT8 (HT_MAX_NC_BUIDS) DUP (?)         ; < The ordered final BUIDs, resulting from the swaps
+BUID_SWAP_LIST    ENDS
+
+
+ ; Control Manual Initialization of Non-Coherent Chains
+
+ ; This interface is checked every time a non-coherent chain is
+ ; processed.  BUID assignment may be controlled explicitly on a
+ ; non-coherent chain. Provide a swap list.  Swaps controls the
+ ; BUID assignment and FinalIds provides the device to device
+ ; Linking.  Device orientation can be detected automatically, or
+ ; explicitly.  See interface documentation for more details.
+
+ ; If a manual swap list is not supplied,
+ ; automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially
+ ; based on each device's unit count.
+
+MANUAL_BUID_SWAP_LIST    STRUCT
+   ; Match fields
+  Socket                        UINT8 ?         ; < The Socket on which this chain is located
+  Link                          UINT8 ?         ; < The Link on the host for this chain
+   ; Override fields
+  SwapList                      BUID_SWAP_LIST {}       ; < The swap list
+MANUAL_BUID_SWAP_LIST    ENDS
+
+
+ ; Override options for DEVICE_CAP_OVERRIDE.
+
+ ; Specify which override actions should be performed.  For Checks, 1 means to check the item
+ ; and 0 means to skip the check.  For the override options, 1 means to apply the override and
+ ; 0 means to ignore the override.
+
+DEVICE_CAP_OVERRIDE_OPTIONS    STRUCT
+  IsCheckDevVenId               UINT32 ?
+;   IN       UINT32  IsCheckDevVenId:1;        ; < Check Match on Device/Vendor id
+;   IN       UINT32  IsCheckRevision:1;         ; < Check Match on device Revision
+;   IN       UINT32  IsOverrideWidthIn:1;       ; < Override Width In
+;   IN       UINT32  IsOverrideWidthOut:1;      ; < Override Width Out
+;   IN       UINT32  IsOverrideFreq:1;          ; < Override Frequency
+;   IN       UINT32  IsOverrideClumping:1;      ; < Override Clumping
+;   IN       UINT32  IsDoCallout:1;             ; < Make the optional callout
+DEVICE_CAP_OVERRIDE_OPTIONS    ENDS
+
+ ; Override capabilities of a device.
+
+ ; This interface is checked once for every Link on every IO device.
+ ; Provide the width and frequency capability if needed for this device.
+ ; This is used along with device capabilities, the limit interfaces, and northbridge
+ ; limits to compute the default settings.  The components of the device's PCI config
+ ; address are provided, so its settings can be consulted if need be.
+ ; The optional callout is a catch all.
+
+DEVICE_CAP_OVERRIDE    STRUCT
+   ; Match fields
+  HostSocket                    UINT8 ?         ; < The Socket on which this chain is located.
+  HostLink                      UINT8 ?         ; < The Link on the host for this chain.
+  Depth                         UINT8 ?         ; < The Depth in the I/O chain from the Host.
+  DevVenId                      UINT32 ?        ; < The Device's PCI Vendor + Device ID (offset 0x00).
+  Revision                      UINT8 ?         ; < The Device's PCI Revision field (offset 0x08).
+  Link                          UINT8 ?         ; < The Device's Link number (0 or 1).
+  Options                       DEVICE_CAP_OVERRIDE_OPTIONS {}          ; < The options for this device override.
+   ; Override fields
+  LinkWidthIn                   UINT8 ?         ; < modify to change the Link Width In.
+  LinkWidthOut                  UINT8 ?         ; < modify to change the Link Width Out.
+  FreqCap                       UINT32 ?        ; < modify to change the Link's frequency capability.
+  Clumping                      UINT32 ?        ; < modify to change Unit ID clumping support.
+  Callout                       CALLOUT_ENTRY ?         ; < optional call for really complex cases, or NULL.
+DEVICE_CAP_OVERRIDE    ENDS
+
+ ; Callout param struct for override capabilities of a device.
+
+ ; If the optional callout is implemented this param struct is passed to it.
+
+DEVICE_CAP_CALLOUT_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < The header
+   ; Match fields
+  HostSocket                    UINT8 ?         ; < The Socket on which this chain is located.
+  HostLink                      UINT8 ?         ; < The Link on the host for this chain.
+  Depth                         UINT8 ?         ; < The Depth in the I/O chain from the Host.
+  DevVenId                      UINT32 ?        ; < The Device's PCI Vendor + Device ID (offset 0x00).
+  Revision                      UINT8 ?         ; < The Device's PCI Revision field (offset 0x08).
+  Link                          UINT8 ?         ; < The Device's Link number (0 or 1).
+  PciAddress                    PCI_ADDR {}      ; < The Device's PCI Address.
+   ; Override fields
+     LinkWidthIn                POINTER ?       ; < modify to change the Link Width In.
+     LinkWidthOut               POINTER ?       ; < modify to change the Link Width Out.
+     FreqCap                    POINTER ?       ; < modify to change the Link's frequency capability.
+     Clumping                   POINTER ?       ; < modify to change Unit ID clumping support.
+DEVICE_CAP_CALLOUT_PARAMS    ENDS
+
+  ; Limits for CPU to CPU Links.
+
+  ; For each coherent connection this interface is checked once.
+  ; Provide the frequency and width if needed for this Link (usually based on board
+  ; restriction).  This is used with CPU device capabilities and northbridge limits
+  ; to compute the default settings.
+
+CPU_TO_CPU_PCB_LIMITS    STRUCT
+   ; Match fields
+  SocketA                       UINT8 ?         ; < One Socket on which this Link is located
+  LinkA                         UINT8 ?         ; < The Link on this Node
+  SocketB                       UINT8 ?         ; < The other Socket on which this Link is located
+  LinkB                         UINT8 ?         ; < The Link on that Node
+   ; Limit fields
+  ABLinkWidthLimit              UINT8 ?         ; < modify to change the Link Width A->B
+  BALinkWidthLimit              UINT8 ?         ; < modify to change the Link Width B-<A
+  PcbFreqCap                    UINT32 ?        ; < modify to change the Link's frequency capability
+CPU_TO_CPU_PCB_LIMITS    ENDS
+
+  ; Get limits for non-coherent Links.
+
+ ; For each non-coherent connection this interface is checked once.
+ ; Provide the frequency and width if needed for this Link (usually based on board
+ ; restriction).  This is used with device capabilities, device overrides, and northbridge limits
+ ; to compute the default settings.
+
+IO_PCB_LIMITS    STRUCT
+   ; Match fields
+  HostSocket                    UINT8 ?         ; < The Socket on which this Link is located
+  HostLink                      UINT8 ?         ; < The Link about to be initialized
+  Depth                         UINT8 ?         ; < The Depth in the I/O chain from the Host
+   ; Limit fields
+  DownstreamLinkWidthLimit      UINT8 ?         ; < modify to change the Link Width going away from processor
+  UpstreamLinkWidthLimit        UINT8 ?         ; < modify to change the Link Width moving toward processor
+  PcbFreqCap                    UINT32 ?        ; < modify to change the Link's frequency capability
+IO_PCB_LIMITS    ENDS
+
+  ; Manually control bus number assignment.
+
+ ; This interface is checked every time a non-coherent chain is processed.
+ ; If a system can not use the auto Bus numbering feature for non-coherent chain bus
+ ; assignments, this interface can provide explicit control.  For each chain, provide
+ ; the bus number range to use.
+
+OVERRIDE_BUS_NUMBERS    STRUCT
+   ; Match fields
+  Socket                        UINT8 ?         ; < The Socket on which this chain is located
+  Link                          UINT8 ?         ; < The Link on the host for this chain
+   ; Override fields
+  SecBus                        UINT8 ?         ; < Secondary Bus number for this non-coherent chain
+  SubBus                        UINT8 ?         ; < Subordinate Bus number
+OVERRIDE_BUS_NUMBERS    ENDS
+
+
+  ; Ignore a Link.
+
+  ; This interface is checked every time a coherent Link is found and then every
+  ; time a non-coherent Link from a CPU is found.
+  ; Any coherent or non-coherent Link from a CPU can be ignored and not used
+  ; for discovery or initialization.  Useful for connection based systems.
+  ; (Note: not checked for IO device to IO Device Links.)
+
+IGNORE_LINK    STRUCT
+   ; Match fields
+  Socket                        UINT8 ?         ; < The Socket on which this Link is located
+  Link                          UINT8 ?         ; < The Link about to be initialized
+   ; Customization fields
+  LinkState                     FINAL_LINK_STATE ? ; < The link may be left unitialized, or powered off.
+IGNORE_LINK    ENDS
+
+
+  ; Skip reganging of subLinks.
+
+  ; This interface is checked whenever two subLinks are both connected to the same CPUs.
+  ; Normally, unganged sublinks between the same two CPUs are reganged.
+  ; Provide a matching structure to leave the Links unganged.
+
+SKIP_REGANG    STRUCT
+   ; Match fields
+  SocketA                       UINT8 ?         ; < One Socket on which this Link is located
+  LinkA                         UINT8 ?         ; < The Link on this Node
+  SocketB                       UINT8 ?         ; < The other Socket on which this Link is located
+  LinkB                         UINT8 ?         ; < The Link on that Node
+   ; Customization fields
+  LinkState                     FINAL_LINK_STATE ? ; < The paired sublink may be active, or powered off.
+SKIP_REGANG    ENDS
+
+  ; The System Socket layout, which sockets are physically connected.
+
+  ; The hardware method for Socket naming is preferred.  Use this software method only
+  ; if required.
+
+SYSTEM_PHYSICAL_SOCKET_MAP    STRUCT
+  CurrentSocket                 UINT8 ?         ; < The socket from which this connection originates.
+  CurrentLink                   UINT8 ?         ; < The Link from the source socket connects to another socket.
+  TargetSocket                  UINT8 ?         ; < The target socket which is connected on that link.
+SYSTEM_PHYSICAL_SOCKET_MAP    ENDS
+
+; ----------------------------------------------------------------------------
+
+ ; This is the input structure for AmdHtInitialize.
+
+AMD_HT_INTERFACE    STRUCT
+   ; Basic level customization
+  AutoBusStart                  UINT8 ?         ; < For automatic bus number assignment, starting bus number usually zero.
+  AutoBusMax                    UINT8 ?         ; < For automatic bus number assignment, do not assign above max.
+  AutoBusIncrement              UINT8 ?         ; < For automatic bus number assignment, each chain gets this many busses.
+
+   ; Advanced Level Customization
+  ManualBuidSwapList            POINTER ?       ; < Provide Manual Swap List, if any.
+  DeviceCapOverrideList         POINTER ?       ; < Provide Device Overrides, if any.
+  CpuToCpuPcbLimitsList         POINTER ?       ; < Provide CPU PCB Limits, if any.
+  IoPcbLimitsList               POINTER ?       ; < Provide IO PCB Limits, if any.
+  OverrideBusNumbersList        POINTER ?       ; < Provide manual Bus Number assignment, if any.
+                                                 ; < Use either auto bus numbering or override bus
+                                                 ; < numbers, not both.
+
+  IgnoreLinkList                POINTER ?       ; < Provide links to ignore, if any.
+  SkipRegangList                POINTER ?       ; < Provide links to remain unganged, if any.
+
+   ; Expert Level Customization
+  Topolist                      POINTER ?       ; < Use this topology list in addition to the built in, if not NULL.
+  SystemPhysicalSocketMap       POINTER ?
+                                                     ; < The hardware socket naming method is preferred,
+                                                     ; <  If it can't be used, this provides a software method.
+AMD_HT_INTERFACE    ENDS
+
+; -----------------------------------------------------------------------------
+
+ ; HT Recovery Interface
+
+
+
+; -----------------------------------------------------------------------------
+; *              HT Recovery DEFINITIONS AND MACROS
+; *
+; *-----------------------------------------------------------------------------
+;
+
+ ; BBHT subfunction events
+    HT_EVENT_BB_EVENTS          EQU    10005000h
+    HT_EVENT_BB_BUID_EXCEED     EQU    10015000h
+    HT_EVENT_BB_DEVICE_FAILED   EQU    10055000h
+    HT_EVENT_BB_AUTO_DEPTH      EQU    10065000h
+
+; ----------------------------------------------------------------------------
+; *                      HT Recovery   TYPEDEFS, STRUCTURES, ENUMS
+; *
+; *----------------------------------------------------------------------------
+;
+
+
+ ; The Interface structure to Recovery HT.
+
+AMD_HT_RESET_INTERFACE    STRUCT
+  ManualBuidSwapList            POINTER ?       ; < Option to manually control SB link init
+     Depth                      UINT32 ?        ; < If auto init was used this is set to the depth of the chain,
+                                   ; < else, for manual init unmodified.
+AMD_HT_RESET_INTERFACE    ENDS
+
+
+;-----------------------------------------------------------------------------
+;                     FCH DEFINITIONS AND MACROS
+;
+;-----------------------------------------------------------------------------
+
+; Configuration values for SdConfig
+  SdDisable         EQU     0            ; Disabled
+  SdAmda            EQU     1            ; AMDA,  set 24,18,16,  default
+  SdDma             EQU     2            ; DMA clear 24, 16, set 18
+  SdPio             EQU     3            ; PIO clear 24,18,16
+SD_MODE          TEXTEQU <DWORD>
+
+; Configuration values for SdClockControl
+  Sd50MhzTraceCableLengthWithinSixInches           EQU  4    ; 50Mhz, default
+  Sd40MhzTraceCableLengthSix2ElevenInches          EQU  6    ; 40Mhz
+  Sd25MhzTraceCableLengthEleven2TwentyfourInches   EQU  7    ; 25Mhz
+SD_CLOCK_CONTROL  TEXTEQU <DWORD>
+
+; Configuration values for AzaliaController
+  AzAuto            EQU     0            ; Auto - Detect Azalia controller automatically
+  AzDisable         EQU     1            ; Diable - Disable Azalia controller
+  AzEnable          EQU     2            ; Enable - Enable Azalia controller
+HDA_CONFIG       TEXTEQU <DWORD>
+
+; Configuration values for IrConfig
+  IrDisable         EQU     0            ; Disable
+  IrRxTx0           EQU     1            ; Rx and Tx0
+  IrRxTx1           EQU     2            ; Rx and Tx1
+  IrRxTx0Tx1        EQU     3            ; Rx and both Tx0,Tx1
+IR_CONFIG        TEXTEQU <DWORD>
+
+; Configuration values for SataClass
+  SataNativeIde     EQU     0            ; Native IDE mode
+  SataRaid          EQU     1            ; RAID mode
+  SataAhci          EQU     2            ; AHCI mode
+  SataLegacyIde     EQU     3            ; Legacy IDE mode
+  SataIde2Ahci      EQU     4            ; IDE->AHCI mode
+  SataAhci7804      EQU     5            ; AHCI mode as 7804 ID (AMD driver)
+  SataIde2Ahci7804  EQU     6            ; IDE->AHCI mode as 7804 ID (AMD driver)
+SATA_CLASS       TEXTEQU <DWORD>
+
+; Configuration values for GppLinkConfig
+  PortA4            EQU     0            ; 4:0:0:0
+  PortA2B2          EQU     2            ; 2:2:0:0
+  PortA2B1C1        EQU     3            ; 2:1:1:0
+  PortA1B1C1D1      EQU     4            ; 1:1:1:1
+GPP_LINKMODE       TEXTEQU <DWORD>
+
+; Configuration values for FchPowerFail
+  AlwaysOff         EQU     0            ; Always power off after power resumes
+  AlwaysOn          EQU     1            ; Always power on after power resumes
+  UsePrevious       EQU     3            ; Resume to same setting when power fails
+POWER_FAIL    TEXTEQU <DWORD>
+
+; Configuration values for SATA Link Speed
+  Gen1      EQU   1                      ; SATA port GEN1 speed
+  Gen2      EQU   2                      ; SATA port GEN2 speed
+  Gen3      EQU   3                      ; SATA port GEN3 speed
+SATA_SPEED     TEXTEQU <DWORD>
+
+; Configuration values for GPIO function
+  Function0     EQU     0                ; GPIO Function 1
+  Function1     EQU     1                ; GPIO Function 1
+  Function2     EQU     2                ; GPIO Function 2
+  Function3     EQU     3                ; GPIO Function 3
+GPIO_FUN      TEXTEQU <DWORD>
+
+; Configuration values for GPIO_CFG
+  OwnedByEc     EQU     1                ; This bit can only be written by EC
+  OwnedByHost   EQU     2                ; This bit can only be written by host (BIOS)
+  Sticky        EQU     4                ; If set, [6:3] are sticky
+  PullUpB       EQU     8                ; 0: Pullup enable; 1: Pullup disabled
+  PullDown      EQU     16               ; 0: Pulldown disabled; 1: Pulldown enable
+  GpioOutEnB    EQU     32               ; 0: Output enable; 1: Output disable
+  GpioOut       EQU     64               ; Output state when GpioOutEnB is 0
+  GpioIn        EQU     128              ; This bit is read only - current pin state
+CFG_BYTE      TEXTEQU <DWORD>
+
+; FCH GPIO CONTROL
+GPIO_CONTROL   STRUCT
+  GpioPin        UINT8     ?             ; Gpio Pin, valid range: 0-67, 128-150, 160-228
+  PinFunction    GPIO_FUN  ?             ; Multi-function selection
+  CfgByte        CFG_BYTE  ?             ; GPIO Register value
+GPIO_CONTROL   ENDS
+
+; FCH SCI MAP CONTROL
+SCI_MAP_CONTROL   STRUCT
+  InputPin        UINT8    ?             ; Input Pin, valid range 0-63
+  GpeMap          UINT8    ?             ; Gpe Map, valid range 0-31
+SCI_MAP_CONTROL   ENDS
+
+; FCH SATA PHY CONTROL
+SATA_PHY_CONTROL   STRUCT
+  CommonPhy       BOOLEAN      ?         ; Common PHY or not
+  Gen             SATA_SPEED   ?         ; SATA speed
+  Port            UINT8        ?         ; Port number, valid range: 0-7
+  PhyData         UINT32       ?         ; SATA PHY data, valid range: 0-0xFFFFFFFF
+SATA_PHY_CONTROL   ENDS
+
+;
+; FCH Component Data Structure in InitReset stage
+;
+FCH_RESET_INTERFACE    STRUCT
+  UmiGen2         BOOLEAN    ?      ; Enable Gen2 data rate of UMI
+                                    ;   FALSE - Disable Gen2
+                                    ;   TRUE  - Enable Gen2
+
+  SataEnable      BOOLEAN    ?      ; SATA controller function
+                                    ;   FALSE - SATA controller is disabled
+                                    ;   TRUE  - SATA controller is enabled
+
+  IdeEnable       BOOLEAN    ?      ; SATA IDE controller mode enabled/disabled
+                                    ;   FALSE - IDE controller is disabled
+                                    ;   TRUE  - IDE controller is enabled
+
+  GppEnable       BOOLEAN    ?      ; Master switch of GPP function
+                                    ;   FALSE - GPP disabled
+                                    ;   TRUE  - GPP enabled
+
+  Xhci0Enable     BOOLEAN    ?      ; XHCI0 controller function
+                                    ;   FALSE - XHCI0 controller disabled
+                                    ;   TRUE  - XHCI0 controller enabled
+
+  Xhci1Enable     BOOLEAN    ?      ; XHCI1 controller function
+                                    ;   FALSE - XHCI1 controller disabled
+                                    ;   TRUE  - XHCI1 controller enabled
+
+FCH_RESET_INTERFACE    ENDS
+
+
+;
+; FCH Component Data Structure from InitEnv stage
+;
+FCH_INTERFACE        STRUCT
+  SdConfig             SD_MODE      ?    ; Secure Digital (SD) controller mode
+  AzaliaController     HDA_CONFIG   ?    ; Azalia HD Audio Controller
+  IrConfig             IR_CONFIG    ?    ; Infrared (IR) Configuration
+  UmiGen2              BOOLEAN      ?    ; Enable Gen2 data rate of UMI
+                                         ;   FALSE - Disable Gen2
+                                         ;   TRUE  - Enable Gen2
+  SataClass            SATA_CLASS   ?    ; SATA controller mode
+  SataEnable           BOOLEAN      ?    ; SATA controller function
+                                         ;   FALSE - SATA controller is disabled
+                                         ;   TRUE  - SATA controller is enabled
+  IdeEnable            BOOLEAN      ?    ; SATA IDE controller mode enabled/disabled
+                                         ;   FALSE - IDE controller is disabled
+                                         ;   TRUE  - IDE controller is enabled
+  SataIdeMode          BOOLEAN      ?    ; Native mode of SATA IDE controller
+                                         ;   FALSE - Legacy IDE mode
+                                         ;   TRUE  - Native IDE mode
+  Ohci1Enable          BOOLEAN      ?    ; OHCI controller #1 Function
+                                         ;   FALSE - OHCI1 is disabled
+                                         ;   TRUE  - OHCI1 is enabled
+  Ohci2Enable          BOOLEAN      ?    ; OHCI controller #2 Function
+                                         ;   FALSE - OHCI2 is disabled
+                                         ;   TRUE  - OHCI2 is enabled
+  Ohci3Enable          BOOLEAN      ?    ; OHCI controller #3 Function
+                                         ;   FALSE - OHCI3 is disabled
+                                         ;   TRUE  - OHCI3 is enabled
+  Ohci4Enable          BOOLEAN      ?    ; OHCI controller #4 Function
+                                         ;   FALSE - OHCI4 is disabled
+                                         ;   TRUE  - OHCI4 is enabled
+  XhciSwitch           BOOLEAN      ?    ; XHCI controller Function
+                                         ;   FALSE - XHCI is disabled
+                                         ;   TRUE  - XHCI is enabled
+  GppEnable            BOOLEAN      ?    ; Master switch of GPP function
+                                         ;   FALSE - GPP disabled
+                                         ;   TRUE  - GPP enabled
+  FchPowerFail         POWER_FAIL   ?    ; FCH power failure option
+FCH_INTERFACE        ENDS
+
+
+; ---------------------------------------------------------------------------
+;  CPU Feature related info
+; ---------------------------------------------------------------------------
+ ; Build Configuration values for BLDCFG_PLATFORM_C1E_MODE
+  C1eModeDisabled                   EQU    0    ; < Disabled
+  C1eModeAuto                       EQU    1    ; < Auto mode enables the best C1e method for the
+                                                ; < currently installed processor
+  C1eModeHardware                   EQU    2    ; < Hardware method
+  C1eModeMsgBased                   EQU    3    ; < Message-based method
+  C1eModeSoftwareDeprecated         EQU    4    ; < Deprecated software SMI method
+  C1eModeHardwareSoftwareDeprecated EQU    5    ; < Hardware or Deprecated software SMI method
+  MaxC1eMode                        EQU    6    ; < Not a valid value, used for verifying input
+PLATFORM_C1E_MODES TEXTEQU  <DWORD>
+
+ ; Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE
+  CStateModeDisabled       EQU 0        ; < Disabled
+  CStateModeC6             EQU 1        ; < C6 State
+  MaxCStateMode            EQU 2        ; < Not a valid value, used for verifying input
+PLATFORM_CSTATE_MODES TEXTEQU  <DWORD>
+
+ ; Build Configuration values for BLDCFG_PLATFORM_CPB_MODE
+  CpbModeAuto              EQU 0        ; < Auto
+  CpbModeDisabled          EQU 1        ; < Disabled
+  MaxCpbMode               EQU 2        ; < Not a valid value, used for verifying input
+PLATFORM_CPB_MODES TEXTEQU  <DWORD>
+
+ ; Build Configuration values for BLDCFG_LOW_POWER_PSTATE_FOR_PROCHOT_MODE
+  LOW_POWER_PSTATE_FOR_PROCHOT_AUTO       EQU 0        ; < Auto
+  LOW_POWER_PSTATE_FOR_PROCHOT_DISABLE    EQU 1        ; < Disabled
+  MAX_LOW_POWER_PSTATE_FOR_PROCHOT_MODE   EQU 2        ; < Not a valid value, used for verifying input
+PLATFORM_LOW_POWER_PSTATE_MODES TEXTEQU  <DWORD>
+
+;----------------------------------------------------------------------------
+;   GNB PCIe configuration info
+;----------------------------------------------------------------------------
+
+GNB_EVENT_INVALID_CONFIGURATION                 EQU  20010000h   ; User configuration invalid
+GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION   EQU  20010001h   ; Requested lane allocation for PCIe port can not be supported
+GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION       EQU  20010002h   ; Requested incorrect PCIe port device address
+GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION        EQU  20010003h   ; Incorrect parameter in DDI link configuration
+GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION      EQU  20010004h   ; Invalid with for PCIe port or DDI link
+GNB_EVENT_INVALID_LANES_CONFIGURATION           EQU  20010005h   ; Lane double subscribe lanes
+GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION    EQU  20010006h   ; Requested lane allocation for DDI link(s) can not be supported
+GNB_EVENT_LINK_TRAINING_FAIL                    EQU  20020000h   ; PCIe Link training fail
+GNB_EVENT_BROKEN_LANE_RECOVERY                  EQU  20030000h   ; Broken lane workaround applied to recover link training
+GNB_EVENT_GEN2_SUPPORT_RECOVERY                 EQU  20040000h   ; Scale back to GEN1 to recover link training
+
+DESCRIPTOR_TERMINATE_LIST                       EQU  80000000h
+DESCRIPTOR_IGNORE                               EQU  40000000h
+
+PCIe_PORT_MISC_CONTROL          STRUCT
+  LinkComplianceMode            UINT8  ?
+ ;IN      UINT8  LinkComplianceMode :1;                   ;< Force port into compliance mode (device will not be trained, port output compliance pattern)
+PCIe_PORT_MISC_CONTROL          ENDS
+
+PCIe_PORT_DATA                  STRUCT
+  PortPresent                   UINT8  ?                  ; < Enable PCIe port for initialization.
+  ChannelType                   UINT8  ?                  ; < Channel type.
+                                                          ;  0 - "lowLoss",
+                                                          ;  1 - "highLoss",
+                                                          ;  2 - "mob0db",
+                                                          ;  3 - "mob3db",
+                                                          ;  4 - "extnd6db"
+                                                          ;  5 - "extnd8db"
+                                                          ;
+  DeviceNumber                  UINT8  ?                  ; < Device number for port. Available device numbers may very on different CPUs.
+  FunctionNumber                UINT8  ?                  ; < Reserved for future use
+  LinkSpeedCapability           UINT8  ?                  ; < Advertised Gen Capability
+                                                          ;  0 - Maximum supported by silicon
+                                                          ;  1 - Gen1
+                                                          ;  2 - Gen2
+                                                          ;  3 - Gen3
+                                                          ;
+  LinkAspm                      UINT8  ?                  ; < ASPM control. (see OemPcieLinkAspm for additional option to control ASPM)
+                                                          ;  0 - Disabled
+                                                          ;  1 - L0s only
+                                                          ;  2 - L1 only
+                                                          ;  2 - L0s and L1
+                                                          ;
+  LinkHotplug                   UINT8  ?                  ; < Hotplug control.
+                                                          ;  0 - Disabled
+                                                          ;  1 - Basic
+                                                          ;  2 - Server
+                                                          ;  3 - Enhanced
+                                                          ;
+  ResetId                       UINT8  ?                  ; < Arbitrary number greater than 0 assigned by platform firmware for GPIO
+                                                          ; identification which control reset for given port.
+                                                          ; Each port with unique GPIO should have unique ResetId assigned.
+                                                          ; All ports use same GPIO to control reset should have same ResetId assigned.
+                                                          ; see AgesaPcieSlotResetControl
+                                                          ;
+  MiscControls                  PCIe_PORT_MISC_CONTROL {} ; < Misc extended controls
+PCIe_PORT_DATA                  ENDS
+
+;DDI channel lane mapping
+
+CHANNEL_MAPPING             STRUCT                    ;
+  Lane0                         UINT8  ?                  ;
+    ;IN      UINT8              Lane0   :2;                 ;
+    ;IN      UINT8              Lane1   :2;                ///< Lane 1 mapping (see "Lane 0 mapping")
+    ;IN      UINT8              Lane2   :2;                ///< Lane 2 mapping (see "Lane 0 mapping")
+    ;IN      UINT8              Lane3   :2;                ///< Lane 3 mapping (see "Lane 0 mapping")
+CHANNEL_MAPPING             ENDS                      ;
+
+CONN_CHANNEL_MAPPING            UNION
+  ChannelMappingValue           UINT8  ?                  ; < Raw lane mapping
+  ChannelMapping                CHANNEL_MAPPING {}    ;
+CONN_CHANNEL_MAPPING            ENDS                      ;
+
+; DDI Configuration
+PCIe_DDI_DATA                   STRUCT
+  ConnectorType                 UINT8  ?                  ; < Display Connector Type
+                                                          ;  0 - DP
+                                                          ;  1 - eDP
+                                                          ;  2 - Single Link DVI
+                                                          ;  3 - Dual  Link DVI
+                                                          ;  4 - HDMI
+                                                          ;  5 - Travis DP-to-VGA
+                                                          ;  6 - Travis DP-to-LVDS
+                                                          ;  7 - Hudson-2 NutMeg DP-to-VGA
+                                                          ;  8 - Single Link DVI-I
+                                                          ;  9 - CRT (VGA)
+                                                          ;  10 - LVDS
+                                                          ;  11 - VBIOS auto detect connector type
+  AuxIndex                      UINT8  ?                  ; < Indicates which AUX or DDC Line is used
+                                                          ;  0 - AUX1
+                                                          ;  1 - AUX2
+                                                          ;  2 - AUX3
+                                                          ;  3 - AUX4
+                                                          ;  4 - AUX5
+                                                          ;  5 - AUX6
+                                                          ;
+  HdpIndex                      UINT8  ?                  ; < Indicates which HDP pin is used
+                                                          ;  0 - HDP1
+                                                          ;  1 - HDP2
+                                                          ;  2 - HDP3
+                                                          ;  3 - HDP4
+                                                          ;  4 - HDP5
+                                                          ;  5 - HDP6
+  Mapping                       CONN_CHANNEL_MAPPING (2) DUP ({})  ;< Set specific mapping of lanes to connector pins
+                                                                   ;Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane
+                                                                   ;Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only
+                                                                   ;applicable for Dual DDI link)
+                                                                   ;if Mapping[x] set to 0 than default mapping assumed
+  LanePnInversionMask           UINT8  ?                  ; < Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port
+                                                          ;  0 - Do not invert (default)
+                                                          ;  1 - Invert P and N on this lane
+PCIe_DDI_DATA                   ENDS
+
+
+; Engine Configuration
+PCIe_ENGINE_DATA                STRUCT
+  EngineType                    UINT8   ?                 ; < Engine type
+                                                          ;  0 -  Ignore engine configuration
+                                                          ;  1 -  PCIe port
+                                                          ;  2 -  DDI
+  StartLane                     UINT16  ?                 ; < Start lane number (in reversed configuration StartLane > EndLane).
+  EndLane                       UINT16  ?                 ; < End lane number (in reversed configuration StartLane > EndLane).
+PCIe_ENGINE_DATA                ENDS
+
+; PCIe port descriptor
+PCIe_PORT_DESCRIPTOR            STRUCT
+  Flags                         UINT32  ?                 ; < Descriptor flags
+                                                          ;  Bit31 - last descriptor in complex
+  EngineData                    PCIe_ENGINE_DATA {}       ; < Engine data
+  Port                          PCIe_PORT_DATA {}         ; < PCIe port specific configuration info
+PCIe_PORT_DESCRIPTOR            ENDS
+
+; DDI descriptor
+PCIe_DDI_DESCRIPTOR             STRUCT
+  Flags                         UINT32  ?                 ; < Descriptor flags
+  EngineData                    PCIe_ENGINE_DATA {}       ; < Engine data
+  Ddi                           PCIe_DDI_DATA {}          ; < DDI port specific configuration info
+PCIe_DDI_DESCRIPTOR             ENDS
+
+; Slot Reset Info
+PCIe_SLOT_RESET_INFO            STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}      ; < AGESA Standard Header
+  ResetId                       UINT8  ?                  ; < Slot reset ID as specified in PCIe_PORT_DESCRIPTOR
+  ResetControl                  UINT8  ?                  ; < Reset control as defined by PCIE_RESET_CONTROL
+PCIe_SLOT_RESET_INFO            ENDS
+
+
+; PCIe Complex descriptor
+PCIe_COMPLEX_DESCRIPTOR         STRUCT
+  Flags                         UINT32  ?                 ; < Descriptor flags
+                                                          ; Bit31 - last descriptor in topology
+                                                          ;
+                                                          ;
+  SocketId                      UINT32  ?                 ; < Socket Id
+  PciePortList                  POINTER ?                 ;< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST).
+  DdiLinkList                   POINTER ?                 ;< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST).
+  Reserved                      POINTER ?         ;< Reserved for future use
+PCIe_COMPLEX_DESCRIPTOR         ENDS
+
+  AssertSlotReset               EQU  0
+  DeassertSlotReset             EQU  1
+PCIE_RESET_CONTROL TEXTEQU  <DWORD>
+
+  PcieUnusedEngine              EQU  0
+  PciePortEngine                EQU  1
+  PcieDdiEngine                 EQU  2
+  MaxPcieEngine                 EQU  3                    ; < Not a valid value, used for verifying input
+PCIE_ENGINE_TYPE   TEXTEQU  <DWORD>
+
+  PcieGenMaxSupported           EQU  0
+  PcieGen1                      EQU  1
+  PcieGen2                      EQU  2
+  MaxPcieGen                    EQU  3                    ; < Not a valid value, used for verifying input
+PCIE_LINK_SPEED_CAP      TEXTEQU  <DWORD>
+
+  PsppDisabled                  EQU  0
+  PsppPerformance               EQU  1
+  PsppBalanceHigh               EQU  2
+  PsppBalanceLow                EQU  3
+  PsppPowerSaving               EQU  4
+  MaxPspp                       EQU  5                     ; < Not a valid value, used for verifying input
+PCIE_PSPP_POLICY      TEXTEQU  <DWORD>
+
+  ConnectorTypeDP               EQU  0
+  ConnectorTypeEDP              EQU  1
+  ConnectorTypeSingleLinkDVI    EQU  2
+  ConnectorTypeDualLinkDVI      EQU  3
+  ConnectorTypeHDMI             EQU  4
+  ConnectorTypeTravisDpToVga    EQU  5
+  ConnectorTypeTravisDpToLvds   EQU  6
+  ConnectorTypeNutmegDpToVga    EQU  7
+  ConnectorTypeSingleLinkDviI   EQU  8
+  ConnectorTypeCrt              EQU  9
+  ConnectorTypeLvds             EQU  10
+  ConnectorTypeAutoDetect       EQU  11
+  MaxConnectorType              EQU  12                    ; < Not a valid value, used for verifying input
+PCIE_CONNECTOR_TYPE      TEXTEQU  <DWORD>
+
+  ChannelTypeLowLoss            EQU  0
+  ChannelTypeHighLoss           EQU  1
+  ChannelTypeMob0db             EQU  2
+  ChannelTypeMob3db             EQU  3
+  ChannelTypeExt6db             EQU  4
+  ChannelTypeExt8db             EQU  5
+  MaxChannelType                EQU  6                    ; < Not a valid value, used for verifying input
+PCIE_CHANNEL_TYPE  TEXTEQU  <DWORD>
+
+  AspmDisabled                  EQU  0
+  AspmL0s                       EQU  1
+  AspmL1                        EQU  2
+  AspmL0sL1                     EQU  3
+  MaxAspm                       EQU  4                    ; < Not a valid value, used for verifying input
+PCIE_ASPM_TYPE  TEXTEQU  <DWORD>
+
+  HotplugDisabled               EQU  0
+  HotplugBasic                  EQU  1
+  HotplugServer                 EQU  2
+  HotplugEnhanced               EQU  3
+  HotplugInboard                EQU  4
+  MaxHotplug                    EQU  5                    ; < Not a valid value, used for verifying input
+PCIE_HOTPLUG_TYPE TEXTEQU  <DWORD>
+
+  PortDisabled                  EQU  0
+  PortEnabled                   EQU  1
+PCIE_PORT_ENABLE  TEXTEQU  <DWORD>
+
+  Aux1                          EQU  0
+  Aux2                          EQU  1
+  Aux3                          EQU  2
+  Aux4                          EQU  3
+  Aux5                          EQU  4
+  Aux6                          EQU  5
+  MaxAux                        EQU  6                    ; < Not a valid value, used for verifying input
+PCIE_AUX_TYPE TEXTEQU  <DWORD>
+
+  Hdp1                          EQU  0
+  Hdp2                          EQU  1
+  Hdp3                          EQU  2
+  Hdp4                          EQU  3
+  Hdp5                          EQU  4
+  Hdp6                          EQU  5
+  MaxHdp                        EQU  6                   ; < Not a valid value, used for verifying input
+PCIE_HDP_TYPE TEXTEQU  <DWORD>
+
+
+;IOMMU requestor ID
+IOMMU_REQUESTOR_ID STRUCT
+   Bus              UINT16               ?               ; <[15:8] - Bus number, [7:3] - Device number, [2:0] - Function number
+IOMMU_REQUESTOR_ID ENDS
+
+;IVMD exclusion range descriptor
+IOMMU_EXCLUSION_RANGE_DESCRIPTOR STRUCT
+  Flags                  UINT32               ?           ; Descriptor flags
+                                                          ;  @li @b Flags[31] - Terminate descriptor array.
+                                                          ;  @li @b Flags[30] - Ignore descriptor.
+  RequestorIdStart       IOMMU_REQUESTOR_ID   {}          ; Requestor ID start
+  RequestorIdEnd         IOMMU_REQUESTOR_ID   {}          ; Requestor ID end (use same as start for single ID)
+  RangeBaseAddress       UINT64               ?           ; Phisical base address of exclusion range
+  RangeLength            UINT64               ?           ; Length of exclusion range in bytes
+IOMMU_EXCLUSION_RANGE_DESCRIPTOR ENDS
+
+;----------------------------------------------------------------------------
+;   GNB configuration info
+;----------------------------------------------------------------------------
+;
+
+; LVDS Misc Control Field
+LVDS_MISC_CONTROL_FIELD         STRUCT
+  FpdiMode          UINT8       ?
+    ;IN  UINT8     FpdiMode:1;
+    ;IN  UINT8     DlChSwap:1;
+    ;IN  UINT8     VsyncActiveLow:1;
+    ;IN  UINT8     HsyncActiveLow:1;
+    ;IN  UINT8     BLONActiveLow:1;
+    ;IN  UINT8     Reserved:3;
+LVDS_MISC_CONTROL_FIELD         ENDS
+
+; LVDS Misc Control
+LVDS_MISC_CONTROL           UNION
+  Field        LVDS_MISC_CONTROL_FIELD   {}
+  Value        UINT8  ?
+LVDS_MISC_CONTROL           ENDS
+
+; Configuration settings for GNB.
+GNB_ENV_CONFIGURATION          STRUCT
+  Gnb3dStereoPinIndex          UINT8  ?       ;< 3D Stereo Pin ID.
+                                              ;  @li 0 = Stereo 3D is disabled (default).
+                                              ;  @li 1 = Use processor pin HPD1.
+                                              ;  @li 2 = Use processor pin HPD2
+                                              ;  @li 3 = Use processor pin HPD3
+                                              ;  @li 4 = Use processor pin HPD4
+                                              ;  @li 5 = Use processor pin HPD5
+                                              ;  @li 6 = Use processor pin HPD6
+  IommuSupport                 BOOLEAN ?      ; IOMMU support.
+                                              ; TRUE  = Disable and hide IOMMU device.
+                                              ; FLASE = Initialize IOMMU subsystem. Generate ACPI IVRS table.
+  LvdsSpreadSpectrum           UINT16  ?      ; Spread spectrum value in 0.01 %
+  LvdsSpreadSpectrumRate       UINT16  ?      ; Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz
+  LvdsPowerOnSeqDigonToDe      UINT8   ?      ; This item configures panel initialization timing.
+  LvdsPowerOnSeqDeToVaryBl     UINT8   ?      ; This item configures panel initialization timing.
+  LvdsPowerOnSeqDeToDigon      UINT8   ?      ; This item configures panel initialization timing.
+  LvdsPowerOnSeqVaryBlToDe     UINT8   ?      ; This item configures panel initialization timing.
+  LvdsPowerOnSeqOnToOffDelay   UINT8   ?      ; This item configures panel initialization timing.
+  LvdsPowerOnSeqVaryBlToBlon   UINT8   ?      ; This item configures panel initialization timing.
+  LvdsPowerOnSeqBlonToVaryBl   UINT8   ?      ; This item configures panel initialization timing.
+  LvdsMaxPixelClockFreq        UINT16  ?      ; This item configures the maximum pixel clock frequency supported.
+  LcdBitDepthControlValue      UINT32  ?      ; This item configures the LCD bit depth control settings.
+  Lvds24bbpPanelMode           UINT8   ?      ; This item configures the LVDS 24 BBP mode.
+  LvdsMiscControl              LVDS_MISC_CONTROL   {}      ; This item configures LVDS swap/Hsync/Vsync/BLON
+  PcieRefClkSpreadSpectrum     UINT16  ?      ; Spread spectrum value in 0.01 %
+  GnbRemoteDisplaySupport      BOOLEAN ?      ; This item enables Wireless Display Support
+GNB_ENV_CONFIGURATION          ENDS
+
+; GNB configuration info
+GNB_CONFIGURATION              STRUCT
+  PcieComplexList              POINTER ?      ; Pointer to array of PCIe_COMPLEX_DESCRIPTOR structures describe PCIe topology on each processor package or NULL.
+                                              ;  Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST
+                                              ;
+                                              ;
+                                              ;
+                                              ;  Topology organization definition assume PCIe_COMPLEX_DESCRIPTOR defined first following
+                                              ;  PCIe_PORT_DESCRIPTOR and  PCIe_DDI_DESCRIPTOR for given PCIe_COMPLEX_DESCRIPTOR
+                                              ;  defined in arbitrary sequence:
+                                              ;  Example of topology definition for single socket system:
+                                              ;    PlatfromTopology LABEL DWORD
+                                              ;
+                                              ;    Port0_2  PCIe_PORT_DESCRIPTOR <>;
+                                              ;    Port0_3  PCIe_PORT_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST> ;
+                                              ;    ...
+                                              ;    Ddi0_A   PCIe_DDI_DESCRIPTOR <>;
+                                              ;    Ddi0_B   PCIe_DDI_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST,>;
+                                              ;    ...
+                                              ;    Cpu0     PCIe_COMPLEX_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST, 0, Port0_2, Ddi0_A>
+                                              ;
+                                              ;
+  PsppPolicy                   UINT8  ?       ;< PSPP (PCIe Speed Power Policy)
+                                              ;  @li @b 0 - Disabled
+                                              ;  @li @b 1 - Performance
+                                              ;  @li @b 2 - Balance-High
+                                              ;  @li @b 3 - Balance-Low
+                                              ;  @li @b 4 - Power Saving
+                                              ;
+GNB_CONFIGURATION              ENDS
+
+
+; ---------------------------------------------------------------------------
+
+; MEMORY-SPECIFIC DATA STRUCTURES
+
+; ---------------------------------------------------------------------------
+
+
+ ; AGESA MAXIMIUM VALUES
+
+   ; These Max values are used to define array sizes and associated loop
+   ; counts in the code.  They reflect the maximum values that AGESA
+   ; currently supports and does not necessarily reflect the hardware
+   ; capabilities of configuration.
+
+
+    MAX_SOCKETS_SUPPORTED       EQU    8       ; < Max number of sockets in system
+    MAX_CHANNELS_PER_SOCKET     EQU    4       ; < Max Channels per sockets
+    MAX_DIMMS_PER_CHANNEL       EQU    4       ; < Max DIMMs on a memory channel (independent of platform)
+    NUMBER_OF_DELAY_TABLES      EQU    9       ; < Number of tables defined in CH_DEF_STRUCT.
+                                               ; < Eg: UINT16  *RcvEnDlys;
+                                               ; <     UINT8   *WrDqsDlys;
+                                               ; <     UINT8   *RdDqsDlys;
+                                               ; <     UINT8   *WrDatDlys;
+                                               ; <     UINT8   *RdDqsMinDlys;
+                                               ; <     UINT8   *RdDqsMaxDlys;
+                                               ; <     UINT8   *WrDatMinDlys;
+                                               ; <     UINT8   *WrDatMaxDlys;
+    NUMBER_OF_FAILURE_MASK_TABLES EQU 1        ; < Number of failure mask tables
+    MAX_PLATFORM_TYPES          EQU    16       ; < Platform types per system
+
+    MCT_TRNG_KEEPOUT_START      EQU    00004000h        ; < base [39:8]
+    MCT_TRNG_KEEPOUT_END        EQU    00007FFFh        ; < base [39:8]
+
+    UMA_ATTRIBUTE_INTERLEAVE    EQU    80000000h    ; < Uma Region is interleaved
+    UMA_ATTRIBUTE_ON_DCT0       EQU    40000000h    ; < UMA resides on memory that belongs to DCT0
+    UMA_ATTRIBUTE_ON_DCT1       EQU    20000000h    ; < UMA resides on memory that belongs to DCT1
+
+    PSO_TABLE           TEXTEQU    <UINT8>; < Platform Configuration Table
+
+        ; AGESA DEFINITIONS
+
+        ; Many of these are derived from the platform and hardware specific definitions
+
+ ; EccSymbolSize override value
+    ECCSYMBOLSIZE_USE_BKDG      EQU    0       ; < Use BKDG Recommended Value
+    ECCSYMBOLSIZE_FORCE_X4      EQU    4       ; < Force to x4
+    ECCSYMBOLSIZE_FORCE_X8      EQU    8       ; < Force to x8
+ ; CPU Package Type
+    PT_L1                       EQU    0                     ; < L1 Package type
+    PT_M2                       EQU    1                     ; < AM Package type
+    PT_S1                       EQU    2                     ; < S1 Package type
+
+ ; Structures use to pass system Logical CPU-ID
+CPU_LOGICAL_ID    STRUCT
+  Family                        UINT64 ?        ; < Indicates logical ID Family
+  Revision                      UINT64 ?        ; < Indicates logical ID Family
+CPU_LOGICAL_ID    ENDS
+
+ ; Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE
+
+  AMD_PLATFORM_SERVER   EQU    8000h    ; < Server
+  AMD_PLATFORM_DESKTOP  EQU    10000h   ; < Desktop
+  AMD_PLATFORM_MOBILE   EQU    20000h   ; < Mobile
+AMD_PLATFORM_TYPE  TEXTEQU  <DWORD>
+
+ ; Dram technology type
+
+  DDR2_TECHNOLOGY       EQU    0        ; < DDR2 technology
+  DDR3_TECHNOLOGY       EQU    1        ; < DDR3 technology
+TECHNOLOGY_TYPE  TEXTEQU  <DWORD>
+
+ ; Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT
+
+  DDR400_FREQUENCY      EQU    200      ; < DDR 400
+  DDR533_FREQUENCY      EQU    266      ; < DDR 533
+  DDR667_FREQUENCY      EQU    333      ; < DDR 667
+  DDR800_FREQUENCY      EQU    400      ; < DDR 800
+  DDR1066_FREQUENCY     EQU    533      ; < DDR 1066
+  DDR1333_FREQUENCY     EQU    667      ; < DDR 1333
+  DDR1600_FREQUENCY     EQU    800      ; < DDR 1600
+  DDR1866_FREQUENCY     EQU    933      ; < DDR 1866
+  DDR2100_FREQUENCY     EQU    1050     ; < DDR 2100
+  DDR2133_FREQUENCY     EQU    1066     ; < DDR 2133
+  DDR2400_FREQUENCY     EQU    1200     ; < DDR 2400
+  UNSUPPORTED_DDR_FREQUENCY     EQU    1201      ; < Highest limit of DDR frequency
+MEMORY_BUS_SPEED  TEXTEQU  <DWORD>
+
+ ; Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE
+
+  QUADRANK_REGISTERED   EQU    0
+  QUADRANK_UNBUFFERED   EQU    1
+QUANDRANK_TYPE  TEXTEQU  <DWORD>
+
+ ; Build Configuration values for BLDCFG_TIMING_MODE_SELECT
+
+  TIMING_MODE_AUTO      EQU    0        ; < Use best rate possible
+  TIMING_MODE_LIMITED   EQU    1        ; < Set user top limit
+  TIMING_MODE_SPECIFIC  EQU    2        ; < Set user specified speed
+USER_MEMORY_TIMING_MODE  TEXTEQU  <DWORD>
+
+ ; Build Configuration values for BLDCFG_POWER_DOWN_MODE
+
+  POWER_DOWN_BY_CHANNEL     EQU 0
+  POWER_DOWN_BY_CHIP_SELECT EQU 1
+  POWER_DOWN_AUTO           EQU 2
+POWER_DOWN_MODE  TEXTEQU  <DWORD>
+
+ ; Low voltage support
+
+  VOLT_INITIAL EQU 0             ; < Initial value for VDDIO
+  VOLT1_5 EQU 1                  ; < 1.5 Volt
+  VOLT1_35 EQU 2                 ; < 1.35 Volt
+  VOLT1_25 EQU 3                 ; < 1.25 Volt
+  VOLT_UNSUPPORTED EQU 0FFh      ; < No common voltage found
+DIMM_VOLTAGE   TEXTEQU  <DWORD>
+
+ ; UMA Mode
+
+  UMA_NONE       EQU    0        ; < UMA None
+  UMA_SPECIFIED  EQU    1        ; < UMA Specified
+  UMA_AUTO       EQU    2        ; < UMA Auto
+UMA_MODE  TEXTEQU  <DWORD>
+
+ ; Force Training Mode
+
+  FORCE_TRAIN_1D       EQU    0        ; < 1D Training only
+  FORCE_TRAIN___       EQU    1        ; <
+  FORCE_TRAIN_AUTO       EQU    2        ; < Auto
+FORCE_TRAIN_MODE  TEXTEQU  <DWORD>
+
+;  The possible DRAM prefetch mode settings.
+  DRAM_PREFETCHER_AUTO             EQU  0           ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+  DISABLE_DRAM_PREFETCH_FOR_IO     EQU  1           ; Disable DRAM prefetching for I/O requests only.
+  DISABLE_DRAM_PREFETCH_FOR_CPU    EQU  2           ; Disable DRAM prefetching for requests from processor cores only.
+  DISABLE_DRAM_PREFETCHER          EQU  3           ; Disable DRAM prefetching.
+  MAX_DRAM_FREFETCH_MODE           EQU  4           ; Not a DRAM prefetch mode, use for limit checking.
+DRAM_PREFETCH_MODE     TEXTEQU  <DWORD>
+
+ ; Build Configuration values for BLDCFG_UMA_ALIGNMENT
+
+  NO_UMA_ALIGNED    EQU    00FFFFFFh
+  UMA_4MB_ALIGNED   EQU    00FFFFC0h
+  UMA_128MB_ALIGNED EQU    00FFF800h
+  UMA_256MB_ALIGNED EQU    00FFF000h
+  UMA_512MB_ALIGNED EQU    00FFE000h
+UMA_ALIGNMENT  TEXTEQU  <DWORD>
+ ; ===============================================================================
+   ; Global MCT Configuration Status Word (GStatus)
+ ; ===============================================================================
+
+  GsbMTRRshort          EQU    0        ; < Ran out of MTRRs while mapping memory
+  GsbAllECCDimms        EQU    1        ; < All banks of all Nodes are ECC capable
+  GsbDramECCDis         EQU    2        ; < Dram ECC requested but not enabled.
+  GsbSoftHole           EQU    3        ; < A Node Base gap was created
+  GsbHWHole             EQU    4        ; < A HW dram remap was created
+  GsbNodeIntlv          EQU    5        ; < Node Memory interleaving was enabled
+  GsbSpIntRemapHole     EQU    6        ; < Special condition for Node Interleave and HW remapping
+  GsbEnDIMMSpareNW      EQU    7        ; < Indicates that DIMM Spare can be used without a warm reset
+
+  GsbEOL                EQU    8        ; < End of list
+GLOBAL_STATUS_FIELD  TEXTEQU  <DWORD>
+
+; ===============================================================================
+   ; Local Error Status (DIE_STRUCT.ErrStatus[31:0])
+; ===============================================================================
+
+  EsbNoDimms            EQU    0        ; < No DIMMs
+  EsbSpdChkSum          EQU    1        ; < SPD Checksum fail
+  EsbDimmMismatchM      EQU    2        ; < dimm module type(buffer) mismatch
+  EsbDimmMismatchT      EQU    3        ; < dimm CL/T mismatch
+  EsbDimmMismatchO      EQU    4        ; < dimm organization mismatch (128-bit)
+  EsbNoTrcTrfc          EQU    5        ; < SPD missing Trc or Trfc info
+  EsbNoCycTime          EQU    6        ; < SPD missing byte 23 or 25
+  EsbBkIntDis           EQU    7        ; < Bank interleave requested but not enabled
+  EsbDramECCDis         EQU    8        ; < Dram ECC requested but not enabled
+  EsbSpareDis           EQU    9        ; < Online spare requested but not enabled
+  EsbMinimumMode        EQU    10       ; < Running in Minimum Mode
+  EsbNoRcvrEn           EQU    11       ; < No DQS Receiver Enable pass window found
+  EsbSmallRcvr          EQU    12       ; < DQS Rcvr En pass window too small (far right of dynamic range)
+  EsbNoDqsPos           EQU    13       ; < No DQS-DQ passing positions
+  EsbSmallDqs           EQU    14       ; < DQS-DQ passing window too small
+  EsbDCBKScrubDis       EQU    15       ; < DCache scrub requested but not enabled
+
+  EsbEMPNotSupported    EQU    16       ; < Processor is not capable for EMP.
+  EsbEMPConflict        EQU    17       ; < EMP requested but cannot be enabled since
+                               ; < channel interleaving, bank interleaving, or bank swizzle is enabled.
+  EsbEMPDis             EQU    18       ; < EMP requested but cannot be enabled since
+                               ; < memory size of each DCT is not a power of two.
+
+  EsbEOL                EQU    19       ; < End of list
+ERROR_STATUS_FIELD  TEXTEQU  <DWORD>
+
+; ===============================================================================
+  ; Local Configuration Status (DIE_STRUCT.Status[31:0])
+; ===============================================================================
+
+  SbRegistered          EQU    0        ; < All DIMMs are Registered
+  SbEccDimms            EQU    1        ; < All banks ECC capable
+  SbParDimms            EQU    2        ; < All banks Addr/CMD Parity capable
+  SbDiagClks            EQU    3        ; < Jedec ALL slots clock enable diag mode
+  Sb128bitmode          EQU    4        ; < DCT in 128-bit mode operation
+  Sb64MuxedMode         EQU    5        ; < DCT in 64-bit mux'ed mode.
+  Sb2TMode              EQU    6        ; < 2T CMD timing mode is enabled.
+  SbSWNodeHole          EQU    7        ; < Remapping of Node Base on this Node to create a gap.
+  SbHWHole              EQU    8        ; < Memory Hole created on this Node using HW remapping.
+  SbOver400Mhz          EQU    9        ; < DCT freq greater than or equal to 400MHz flag
+  SbDQSPosPass2         EQU    10       ; < Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz
+  SbDQSRcvLimit         EQU    11       ; < Used for DQSRcvEnTrain to know we have reached the upper bound.
+  SbExtConfig           EQU    12       ; < Indicate the default setting for extended PCI configuration support
+  SbLrdimms             EQU    13       ; < All DIMMs are LRDIMMs
+  SbEOL                 EQU    14       ; < End of list
+LOCAL_STATUS_FIELD  TEXTEQU  <DWORD>
+
+
+; < CPU MSR Register definitions ------------------------------------------
+    SYS_CFG                     EQU    0C0010010h
+    TOP_MEM                     EQU    0C001001Ah
+    TOP_MEM2                    EQU    0C001001Dh
+    HWCR                        EQU    0C0010015h
+    NB_CFG                      EQU    0C001001Fh
+
+    FS_BASE                     EQU    0C0000100h
+    IORR0_BASE                  EQU    0C0010016h
+    IORR0_MASK                  EQU    0C0010017h
+    BU_CFG                      EQU    0C0011023h
+    BU_CFG2                     EQU    0C001102Ah
+    COFVID_STAT                 EQU    0C0010071h
+    TSC                         EQU    10h
+
+; ===============================================================================
+ ; SPD Data for each DIMM
+; ===============================================================================
+SPD_DEF_STRUCT    STRUCT
+  DimmPresent                   BOOLEAN ?       ; < Indicates that the DIMM is present and Data is valid
+  Data                          UINT8 (256) DUP (?)     ; < Buffer for 256 Bytes of SPD data from DIMM
+SPD_DEF_STRUCT    ENDS
+
+; ===============================================================================
+ ; Channel Definition Structure
+ ; This data structure defines entries that are specific to the channel initialization
+; ===============================================================================
+CH_DEF_STRUCT    STRUCT
+  ChannelID                     UINT8 ?         ; < Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D)
+  TechType                      TECHNOLOGY_TYPE ?       ; < Technology type of this channel
+  ChDimmPresent                 UINT8 ?         ; < For each bit n 0..7, 1 = DIMM n is present.
+                                 ; <  DIMM#  Select Signal
+                                 ; <  0      MA0_CS_L[0, 1]
+                                 ; <  1      MB0_CS_L[0, 1]
+                                 ; <  2      MA1_CS_L[0, 1]
+                                 ; <  3      MB1_CS_L[0, 1]
+                                 ; <  4      MA2_CS_L[0, 1]
+                                 ; <  5      MB2_CS_L[0, 1]
+                                 ; <  6      MA3_CS_L[0, 1]
+                                 ; <  7      MB3_CS_L[0, 1]
+
+  DCTPtr                        POINTER ?       ; < Pointer to the DCT data of this channel.
+  MCTPtr                        POINTER ?       ; < Pointer to the node data of this channel.
+  SpdPtr                        POINTER ?       ; < Pointer to the SPD data for this channel. (Setup by NB Constructor)
+  DimmSpdPtr                    POINTER (MAX_DIMMS_PER_CHANNEL) DUP (?)         ; < Array of pointers to
+                                 ; <   SPD Data for each Dimm. (Setup by Tech Block Constructor)
+  ChDimmValid                   UINT8 ?         ; < For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved.
+  RegDimmPresent                UINT8 ?         ; < For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved.
+  LrDimmPresent                 UINT8 ?         ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved.
+  SODimmPresent                 UINT8 ?         ; < For each bit n 0..3, 1 = DIMM n is a SO-DIMM where 4..7 are reserved.
+  Loads                         UINT8 ?         ; < Number of devices loading bus
+  Dimms                         UINT8 ?         ; < Number of DIMMs loading Channel
+  Ranks                         UINT8 ?         ; < Number of ranks loading Channel DATA
+  SlowMode                      BOOLEAN ?       ; < 1T or 2T CMD mode (slow access mode)
+                                 ; < FALSE = 1T
+                                 ; < TRUE = 2T
+  ; < The following pointers will be pointed to dynamically allocated buffers.
+  ; < Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below.
+  ; < Example: If DIMM and Byte based training, then
+  ; < XX is a value in Hex
+  ; <                        BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE
+  ; <  Row1 -  Logical DIMM0    XX      XX      XX      XX      XX      XX      XX      XX      XX
+  ; <  Row2 -  Logical DIMM1    XX      XX      XX      XX      XX      XX      XX      XX      XX
+  RcvEnDlys                     POINTER ?       ; < DQS Receiver Enable Delays
+  WrDqsDlys                     POINTER ?       ; < Write DQS delays (only valid for DDR3)
+  RdDqsDlys                     POINTER ?       ; < Read Dqs delays
+  WrDatDlys                     POINTER ?       ; < Write Data delays
+  RdDqs__Dlys                   POINTER ?       ; < Read DQS data
+  RdDqsMinDlys                  POINTER ?       ; < Minimum Window for Read DQS
+  RdDqsMaxDlys                  POINTER ?       ; < Maximum Window for Read DQS
+  WrDatMinDlys                  POINTER ?       ; < Minimum Window for Write data
+  WrDatMaxDlys                  POINTER ?       ; < Maximum Window for Write data
+  RcvEnDlysMemPs1               POINTER ?       ; < DQS Receiver Enable Delays for Memory Pstate 1
+  WrDqsDlysMemPs1               POINTER ?       ; < Write DQS delays for Memory Pstate 1 (only valid for DDR3)
+  RdDqsDlysMemPs1               POINTER ?       ; < Read Dqs delays for Memory Pstate 1
+  WrDatDlysMemPs1               POINTER ?       ; < Write Data delays for Memory Pstate 1
+  RdDqs__DlysMemPs1             POINTER ?       ; < Read DQS data for Memory Pstate 1
+  RdDqsMinDlysMemPs1            POINTER ?       ; < Minimum Window for Read DQS for Memory Pstate 1
+  RdDqsMaxDlysMemPs1            POINTER ?       ; < Maximum Window for Read DQS for Memory Pstate 1
+  WrDatMinDlysMemPs1            POINTER ?       ; < Minimum Window for Write data for Memory Pstate 1
+  WrDatMaxDlysMemPs1            POINTER ?       ; < Maximum Window for Write data for Memory Pstate 1
+  RowCount                      UINT8 ?         ; < Number of rows of the allocated buffer.
+  ColumnCount                   UINT8 ?         ; < Number of columns of the allocated buffer.
+
+  FailingBitMask                POINTER ?       ; < Table of masks to Track Failing bits
+  FailingBitMaskMemPs1          POINTER ?       ; < Table of masks to Track Failing bits for Memory Pstate 1
+  DctOdcCtl                     UINT32 ?        ; < Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h)
+  DctAddrTmg                    UINT32 ?        ; < Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h)
+  PhyRODTCSLow                  UINT32 ?        ; < Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h)
+  PhyRODTCSHigh                 UINT32 ?        ; < Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h)
+  PhyWODTCSLow                  UINT32 ?        ; < Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h)
+  PhyWODTCSHigh                 UINT32 ?        ; < Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183)
+  PhyWLODT                      UINT8 (4) DUP (?)       ; < Write Levelization ODT Pattern for Dimm 0-3 (see BKDG FN2:Offset 9Ch, index 0x8[11:8])
+  DctEccDqsLike                 UINT16 ?        ; < DCT DQS ECC UINT8 like...
+  DctEccDqsScale                UINT8 ?         ; < DCT DQS ECC UINT8 scale
+  PtrPatternBufA                UINT16 ?        ; < Ptr on stack to aligned DQS testing pattern
+  PtrPatternBufB                UINT16 ?        ; < Ptr on stack to aligned DQS testing pattern
+  ByteLane                      UINT8 ?         ; < Current UINT8 Lane (0..7)
+  Direction                     UINT8 ?         ; < Current DQS-DQ training write direction (0=read, 1=write)
+  Pattern                       UINT8 ?         ; < Current pattern
+  DqsDelay                      UINT8 ?         ; < Current DQS delay value
+  HostBiosSrvc1                 UINT16 ?        ; < UINT16 sized general purpose field for use by host BIOS.  Scratch space.
+  HostBiosSrvc2                 UINT32 ?        ; < UINT32 sized general purpose field for use by host BIOS.  Scratch space.
+  DctMaxRdLat                   UINT16 (4) DUP (?)      ; < Max Read Latency (ns) for the DCT
+                                                ; < DctMaxRdLat [i] is for NBPstate i  DIMMValidCh                   UINT8 ?         ; < DIMM# in CH
+  DIMMValidCh                   UINT8 ?         ; < DIMM# in CH
+  MaxCh                         UINT8 ?         ; < Max number of CH in system
+  Dct                           UINT8 ?         ; < Dct pointer
+  WrDatGrossH                   UINT8 ?         ; < Write Data Gross delay high value
+  DqsRcvEnGrossL                UINT8 ?         ; < DQS Receive Enable Gross Delay low
+
+  TrwtWB                        UINT8 ?         ; <  Non-SPD timing value for TrwtWB
+  CurrRcvrDctADelay             UINT8 ?         ; < for keep current RcvrEnDly
+  T1000                         UINT16 ?        ; < get the T1000 figure (cycle time (ns) * 1K)
+  DqsRcvEnPass                  UINT8 ?         ; < for TrainRcvrEn UINT8 lane pass flag
+  DqsRcvEnSaved                 UINT8 ?         ; < for TrainRcvrEn UINT8 lane saved flag
+  SeedPass1Remainder            UINT8 ?         ; < for Phy assisted DQS receiver enable training
+
+  ClToNbFlag                    UINT8 ?         ; < is used to restore ClLinesToNbDis bit after memory
+  NodeSysBase                   UINT32 ?        ; < for channel interleave usage
+  RefRawCard                    UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?)           ; < Array of rawcards detected
+  CtrlWrd02                     UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?)           ; < Control Word 2 values per DIMM
+  CtrlWrd03                     UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?)           ; < Control Word 3 values per DIMM
+  CtrlWrd04                     UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?)           ; < Control Word 4 values per DIMM
+  CtrlWrd05                     UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?)           ; < Control Word 5 values per DIMM
+  CtrlWrd08                     UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?)           ; < Control Word 8 values per DIMM
+
+  CsPresentDCT                  UINT16 ?        ; < For each bit n 0..7, 1 = Chip-select n is present
+  DimmMirrorPresent             UINT8 ?         ; < For each bit n 0..7, 1 = DIMM n is OnDimmMirror capable
+  DimmSpdCse                    UINT8 ?         ; < For each bit n 0..7, 1 = DIMM n SPD checksum error
+  DimmExclude               UINT8 ?         ; < For each bit n 0..7, 1 = DIMM n gets excluded
+  DimmYr06                      UINT8 ?         ; < Bitmap indicating which Dimms have a manufacturer's year code <= 2006
+  DimmWk2406                    UINT8 ?         ; < Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June)
+  DimmPlPresent                 UINT8 ?         ; < Bitmap indicating that Planar (1) or Stacked (0) Dimms are present.
+  DimmQrPresent                 UINT8 ?         ; < QuadRank DIMM present?
+  DimmDrPresent                 UINT8 ?         ; < Bitmap indicating that Dual Rank Dimms are present
+  DimmSRPresent                 UINT8 ?         ; < Bitmap indicating that Single Rank Dimms are present
+  Dimmx4Present                 UINT8 ?         ; < For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved.
+  Dimmx8Present                 UINT8 ?         ; < For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved.
+  Dimmx16Present                UINT8 ?         ; < For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved.
+  LrdimmPhysicalRanks           UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?)         ; < Number of Physical Ranks for LRDIMMs
+  LrDimmLogicalRanks            UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?)         ; < Number of LRDIMM Logical ranks in this configuration
+  LrDimmRankMult                UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?)         ; < Rank Multipication factor per dimm.
+  DimmNibbleAccess              UINT8 ?         ; < For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved.
+  MemClkDisMap                  POINTER ?       ; <  This pointer will be set to point to an array that describes
+                                  ; <  the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will
+                                  ; <  base on this array to disable unused MemClk to save power.
+                                  ; <
+                                  ; <  The array must have 8 entries. Each entry, which associates with
+                                  ; <  one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to.
+                                  ; <    Example:
+                                  ; <    BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package
+                                  ; <    is like below:
+                                  ; <         Bit AM3/S1g3 pin name
+                                  ; <         0   M[B,A]_CLK_H/L[0]
+                                  ; <         1   M[B,A]_CLK_H/L[1]
+                                  ; <         2   M[B,A]_CLK_H/L[2]
+                                  ; <         3   M[B,A]_CLK_H/L[3]
+                                  ; <         4   M[B,A]_CLK_H/L[4]
+                                  ; <         5   M[B,A]_CLK_H/L[5]
+                                  ; <         6   M[B,A]_CLK_H/L[6]
+                                  ; <         7   M[B,A]_CLK_H/L[7]
+                                  ; <    And platform has the following routing:
+                                  ; <         CS0   M[B,A]_CLK_H/L[4]
+                                  ; <         CS1   M[B,A]_CLK_H/L[2]
+                                  ; <         CS2   M[B,A]_CLK_H/L[3]
+                                  ; <         CS3   M[B,A]_CLK_H/L[5]
+                                  ; <    Then MemClkDisMap should be pointed to the following array:
+                                  ; <               CLK_2 CLK_3 CLK_4 CLK_5
+                                  ; <    0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00
+                                  ; <  Each entry of the array is the bitmask of 8 chip selects.
+
+  CKETriMap                     POINTER ?       ; <  This pointer will be set to point to an array that describes
+                                  ; <  the routing of CKE pins to the DIMMs' ranks.
+                                  ; <  The array must have 2 entries. Each entry, which associates with
+                                  ; <  one CKE pin, is a bitmap of 8 CS that that CKE is routed to.
+                                  ; <  AGESA will base on this array to disable unused CKE pins to save power.
+
+  ODTTriMap                     POINTER ?       ; <  This pointer will be set to point to an array that describes
+                                  ; <  the routing of ODT pins to the DIMMs' ranks.
+                                  ; <  The array must have 4 entries. Each entry, which associates with
+                                  ; <  one ODT pin, is a bitmap of 8 CS that that ODT is routed to.
+                                  ; <  AGESA will base on this array to disable unused ODT pins to save power.
+
+  ChipSelTriMap                 POINTER ?       ; <  This pointer will be set to point to an array that describes
+                                  ; <  the routing of chip select pins to the DIMMs' ranks.
+                                  ; <  The array must have 8 entries. Each entry is a bitmap of 8 CS.
+                                  ; <  AGESA will base on this array to disable unused Chip select pins to save power.
+
+  ExtendTmp                     BOOLEAN ?       ; <  If extended temperature is supported on all dimms on a channel.
+
+  MaxVref                        UINT8 ?       ; <  Maximum Vref Value for channel
+
+  Reserved                      UINT8 (100) DUP (?)     ; < Reserved
+CH_DEF_STRUCT    ENDS
+
+; ===============================================================================
+ ; DCT Channel Timing Parameters
+ ; This data structure sets timings that are specific to the channel
+; ===============================================================================
+CH_TIMING_STRUCT    STRUCT
+  DctDimmValid                  UINT16 ?        ; < For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved.
+  DimmMirrorPresent             UINT16 ?        ; < For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved.
+  DimmSpdCse                    UINT16 ?        ; < For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved.
+  DimmExclude               UINT16 ?        ; < For each bit n 0..3, 1 = DIMM n gets excluded because of no common voltage is found
+  CsPresent                     UINT16 ?        ; < For each bit n 0..7, 1=Chip-select n is present
+  CsEnabled                     UINT16 ?        ; < For each bit n 0..7, 1=Chip-select n is enabled
+  CsTestFail                    UINT16 ?        ; < For each bit n 0..7, 1=Chip-select n is present but disabled
+  CsTrainFail                   UINT16 ?        ; < Bitmap showing which chipselects failed training
+  DIMM1KPage                    UINT16 ?        ; < For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved.
+  DimmQrPresent                 UINT16 ?        ; < QuadRank DIMM present?
+  DimmDrPresent                 UINT16 ?        ; < Bitmap indicating that Dual Rank Dimms are present
+  DimmSRPresent                 UINT8 ?         ; < Bitmap indicating that Single Rank Dimms are present
+  Dimmx4Present                 UINT16 ?        ; < For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved.
+  Dimmx8Present                 UINT16 ?        ; < For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved.
+  Dimmx16Present                UINT16 ?        ; < For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved.
+
+  DIMMTrcd                      UINT16 ?        ; < Minimax Trcd*40 (ns) of DIMMs
+  DIMMTrp                       UINT16 ?        ; < Minimax Trp*40 (ns) of DIMMs
+  DIMMTrtp                      UINT16 ?        ; < Minimax Trtp*40 (ns) of DIMMs
+  DIMMTras                      UINT16 ?        ; < Minimax Tras*40 (ns) of DIMMs
+  DIMMTrc                       UINT16 ?        ; < Minimax Trc*40 (ns) of DIMMs
+  DIMMTwr                       UINT16 ?        ; < Minimax Twr*40 (ns) of DIMMs
+  DIMMTrrd                      UINT16 ?        ; < Minimax Trrd*40 (ns) of DIMMs
+  DIMMTwtr                      UINT16 ?        ; < Minimax Twtr*40 (ns) of DIMMs
+  DIMMTfaw                      UINT16 ?        ; < Minimax Tfaw*40 (ns) of DIMMs
+  TargetSpeed                   UINT16 ?        ; < Target DRAM bus speed in MHz
+  Speed                         UINT16 ?        ; < DRAM bus speed in MHz
+                                  ; <  400 (MHz)
+                                  ; <  533 (MHz)
+                                  ; <  667 (MHz)
+                                  ; <  800 (MHz)
+                                  ; <  and so on...
+  CasL                          UINT8 ?         ; < CAS latency DCT setting (busclocks)
+  Trcd                          UINT8 ?         ; < DCT Trcd (busclocks)
+  Trp                           UINT8 ?         ; < DCT Trp (busclocks)
+  Trtp                          UINT8 ?         ; < DCT Trtp (busclocks)
+  Tras                          UINT8 ?         ; < DCT Tras (busclocks)
+  Trc                           UINT8 ?         ; < DCT Trc (busclocks)
+  Twr                           UINT8 ?         ; < DCT Twr (busclocks)
+  Trrd                          UINT8 ?         ; < DCT Trrd (busclocks)
+  Twtr                          UINT8 ?         ; < DCT Twtr (busclocks)
+  Tfaw                          UINT8 ?         ; < DCT Tfaw (busclocks)
+  Trfc0                         UINT8 ?         ; < DCT Logical DIMM0 Trfc
+                                  ; <  0 = 75ns (for 256Mb devs)
+                                  ; <  1 = 105ns (for 512Mb devs)
+                                  ; <  2 = 127.5ns (for 1Gb devs)
+                                  ; < 3 = 195ns (for 2Gb devs)
+                                  ; <  4 = 327.5ns (for 4Gb devs)
+  Trfc1                         UINT8 ?         ; < DCT Logical DIMM1 Trfc (see Trfc0 for format)
+  Trfc2                         UINT8 ?         ; < DCT Logical DIMM2 Trfc (see Trfc0 for format)
+  Trfc3                         UINT8 ?         ; < DCT Logical DIMM3 Trfc (see Trfc0 for format)
+  DctMemSize                    UINT32 ?        ; < Base[47:16], total DRAM size controlled by this DCT.
+  SlowMode                      BOOLEAN ?       ; < 1T or 2T CMD mode (slow access mode)
+                                  ; < FALSE = 1T
+                                  ; < TRUE = 2T
+  TrwtTO                        UINT8 ?         ; < DCT TrwtTO (busclocks)
+  Twrrd                         UINT8 ?         ; < DCT Twrrd (busclocks)
+  Twrwr                         UINT8 ?         ; < DCT Twrwr (busclocks)
+  Trdrd                         UINT8 ?         ; < DCT Trdrd (busclocks)
+  TrwtWB                        UINT8 ?         ; < DCT TrwtWB (busclocks)
+  TrdrdSD                       UINT8 ?         ; < DCT TrdrdSD (busclocks)
+  TwrwrSD                       UINT8 ?         ; < DCT TwrwrSD (busclocks)
+  TwrrdSD                       UINT8 ?         ; < DCT TwrrdSD (busclocks)
+  MaxRdLat                      UINT16 ?        ; < Max Read Latency
+  WrDatGrossH                   UINT8 ?         ; < Temporary variables must be removed
+  DqsRcvEnGrossL                UINT8 ?         ; < Temporary variables must be removed
+CH_TIMING_STRUCT    ENDS
+
+; ===============================================================================
+ ; Data for each DCT
+ ; This data structure defines data used to configure each DRAM controller
+; ===============================================================================
+DCT_STRUCT    STRUCT
+  Dct                           UINT8 ?         ; < Current Dct
+  Timings                       CH_TIMING_STRUCT {}     ; < Channel Timing structure
+  TimingsMemPs1                 POINTER ?       ; < Pointed to channel timing structure for Memory Pstate 1
+  ChData                        POINTER ?       ; < Pointed to a dynamically allocated array of Channel structures
+  ChannelCount                  UINT8 ?         ; < Number of channel per this DCT
+  BkIntDis                      BOOLEAN ?       ; < Bank interleave requested but not enabled on current DCT
+DCT_STRUCT    ENDS
+
+
+; ===============================================================================
+ ; Data Structure defining each Die
+ ; This data structure contains information that is used to configure each Die
+; ===============================================================================
+DIE_STRUCT    STRUCT
+
+   ; Advanced:
+
+  NodeId                        UINT8 ?         ; < Node ID of current controller
+  SocketId                      UINT8 ?         ; < Socket ID of this Die
+  DieId                         UINT8 ?         ; < ID of this die relative to the socket
+  PciAddr                       PCI_ADDR {}      ; < Pci bus and device number of this controller.
+  ErrCode                       AGESA_STATUS ?          ; < Current error condition of Node
+                                   ; <  0x0 = AGESA_SUCCESS
+                                   ; <  0x1 = AGESA_UNSUPPORTED
+                                   ; <  0x2 = AGESA_BOUNDS_CHK
+                                   ; <  0x3 = AGESA_ALERT
+                                   ; <  0x4 = AGESA_WARNING
+                                   ; <  0x5 = AGESA_ERROR
+                                   ; <  0x6 = AGESA_CRITICAL
+                                   ; <  0x7 = AGESA_FATAL
+                                   ; <
+  ErrStatus                     BOOLEAN (EsbEOL) DUP (?)        ; < Error Status bit Field
+  Status                        BOOLEAN (SbEOL) DUP (?)         ; < Status bit Field
+  NodeMemSize                   UINT32 ?        ; < Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node.
+  NodeSysBase                   UINT32 ?        ; < Base[47:16] (system address) DRAM base address of this Node.
+  NodeHoleBase                  UINT32 ?        ; < If not zero, Base[47:16] (system address) of dram hole for HW remapping.  Dram hole exists on this Node
+  NodeSysLimit                  UINT32 ?        ; < Base[47:16] (system address) DRAM limit address of this Node.
+  DimmPresent                   UINT32 ?        ; < For each bit n 0..7, 1 = DIMM n is present.
+                                   ; <   DIMM#  Select Signal
+                                   ; <   0      MA0_CS_L[0, 1]
+                                   ; <   1      MB0_CS_L[0, 1]
+                                   ; <   2      MA1_CS_L[0, 1]
+                                   ; <   3      MB1_CS_L[0, 1]
+                                   ; <   4      MA2_CS_L[0, 1]
+                                   ; <   5      MB2_CS_L[0, 1]
+                                   ; <   6      MA3_CS_L[0, 1]
+                                   ; <   7      MB3_CS_L[0, 1]
+  DimmValid                     UINT32 ?        ; < For each bit n 0..7, 1 = DIMM n is valid and is / will be configured
+  RegDimmPresent                UINT32 ?        ; < For each bit n 0..7, 1 = DIMM n is registered DIMM
+  LrDimmPresent                 UINT32 ?        ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved.
+  DimmEccPresent                UINT32 ?        ; < For each bit n 0..7, 1 = DIMM n is ECC capable.
+  DimmParPresent                UINT32 ?        ; < For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable.
+  DimmTrainFail                 UINT16 ?        ; < Bitmap showing which dimms failed training
+  ChannelTrainFail              UINT16 ?        ; < Bitmap showing the channel information about failed Chip Selects
+                                   ; <  0 in any bit field indicates Channel 0
+                                   ; <  1 in any bit field indicates Channel 1
+  Dct                           UINT8 ?         ; <  Need to be removed
+                                   ; <  DCT pointer
+  GangedMode                    BOOLEAN ?       ; < Ganged mode
+                                   ; <  0 = disabled
+                                   ; <  1 = enabled
+  LogicalCpuid                  CPU_LOGICAL_ID {}       ; < The logical CPUID of the node
+  HostBiosSrvc1                 UINT16 ?        ; < UINT16 sized general purpose field for use by host BIOS.  Scratch space.
+  HostBiosSrvc2                 UINT32 ?        ; < UINT32 sized general purpose field for use by host BIOS.  Scratch space.
+  MLoad                         UINT8 ?         ; < Need to be removed
+                                   ; < Number of devices loading MAA bus
+  MaxAsyncLat                   UINT8 ?         ; < Legacy wrapper
+  ChbD3Rcvrdly                  UINT8 ?         ; < Legacy wrapper
+  ChaMaxRdLat                   UINT16 ?        ; < Max Read Latency (ns) for DCT 0
+  ChbD3BcRcvrdly                UINT8 ?         ; < CHB DIMM 3 Check UINT8 Receiver Enable Delay
+
+  DctData                       POINTER ?       ; < Pointed to a dynamically allocated array of DCT_STRUCTs
+  DctCount                      UINT8 ?         ; < Number of DCTs per this Die
+  Reserved                      UINT8 (16) DUP (?)      ; < Reserved
+DIE_STRUCT    ENDS
+
+; *********************************************************************
+; * S3 Support structure
+; *********************************************************************
+ ; AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure
+AMD_S3_PARAMS    STRUCT
+     Signature                  UINT32 ?        ; < "ASTR" for AMD Suspend-To-RAM
+     Version                    UINT16 ?        ; < S3 Params version number
+  Flags                         UINT32 ?        ; < Indicates operation
+  NvStorage                     POINTER ?       ; < Pointer to memory critical save state data
+  NvStorageSize                 UINT32 ?        ; < Size in bytes of the NvStorage region
+  VolatileStorage               POINTER ?       ; < Pointer to remaining AMD save state data
+  VolatileStorageSize           UINT32 ?        ; < Size in bytes of the VolatileStorage region
+AMD_S3_PARAMS    ENDS
+
+; ===============================================================================
+ ; MEM_PARAMETER_STRUCT
+ ; This data structure is used to pass wrapper parameters to the memory configuration code
+; ===============================================================================
+MEM_PARAMETER_STRUCT    STRUCT
+
+   ; Basic (Return parameters)
+   ; (This section contains the outbound parameters from the memory init code)
+
+  GStatus                       BOOLEAN (GsbEOL) DUP (?)        ; < Global Status bitfield
+  HoleBase                      UINT32 ?        ; < If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping.
+  Sub4GCacheTop                 UINT32 ?        ; < If not zero, the 32-bit top of cacheable memory.
+  Sub1THoleBase                 UINT32 ?        ; < If not zero Base[47:16] (system address) of sub 1TB dram hole.
+  SysLimit                      UINT32 ?        ; < Limit[47:16] (system address)
+  DDR3Voltage                   DIMM_VOLTAGE ?    ; < Find support voltage and send back to platform BIOS.
+  ExternalVrefValue             UINT8 ?         ; < Target reference voltage for external Vref for training
+  MemData                       POINTER ?       ; < Pointer to MEM_DATA_STRUCT
+    ; Advanced (Optional parameters)
+    ; Optional (all defaults values will be initialized by the
+    ; 'AmdMemInitDataStructDef' based on AMD defaults. It is up
+    ; to the IBV/OEM to change the defaults after initialization
+    ; but prior to the main entry to the memory code):
+
+   ; Memory Map/Mgt.
+
+  BottomIo                      UINT16 ?        ; < Bottom of 32-bit IO space (8-bits)
+                                   ; <   NV_BOTTOM_IO[7:0]=Addr[31:24]
+  MemHoleRemapping              BOOLEAN ?       ; < Memory Hole Remapping (1-bit)
+                                   ; <  FALSE = disable
+                                   ; <  TRUE  = enable
+  LimitMemoryToBelow1Tb         BOOLEAN ?       ; < Limit memory address space to below 1 TB
+                                                ; <  FALSE = disable
+                                                ; <  TRUE  = enable
+   ; Dram Timing
+
+  UserTimingMode                USER_MEMORY_TIMING_MODE ?       ; < User Memclock Mode
+
+  MemClockValue                 MEMORY_BUS_SPEED ?      ; < Memory Clock Value
+
+   ; Dram Configuration
+
+  EnableBankIntlv               BOOLEAN ?       ; < Dram Bank (chip-select) Interleaving (1-bit)
+                                   ; <   FALSE =disable (AMD default)
+                                   ; <   TRUE =enable
+  EnableNodeIntlv               BOOLEAN ?       ; < Node Memory Interleaving (1-bit)
+                                   ; <   FALSE = disable (AMD default)
+                                   ; <   TRUE = enable
+  EnableChannelIntlv            BOOLEAN ?       ; < Channel Interleaving (1-bit)
+                                   ; <   FALSE = disable (AMD default)
+                                   ; <   TRUE = enable
+   ; ECC
+
+  EnableEccFeature              BOOLEAN ?       ; < enable ECC error to go into MCE
+                                   ; <   FALSE = disable (AMD default)
+                                   ; <   TRUE = enable
+   ; Dram Power
+
+  EnablePowerDown               BOOLEAN ?       ; < CKE based power down mode (1-bit)
+                                   ; <   FALSE =disable (AMD default)
+                                   ; <   TRUE =enable
+   ; Online Spare
+
+  EnableOnLineSpareCtl          BOOLEAN ?       ; < Chip Select Spare Control bit 0:
+                                   ; <  FALSE = disable Spare (AMD default)
+                                   ; <  TRUE = enable Spare
+  TableBasedAlterations         POINTER ?       ; < Point to an array of data bytes describing desired modifications to register settings.
+
+  PlatformMemoryConfiguration           POINTER ?
+                                   ; < Points to a table that contains platform specific settings
+                                   ; < (i.e. MemClk routing, the number of DIMM slots per channel,...)
+                                   ; < AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that
+                                   ; < contains default conservative settings. Platform BIOS can either tweak
+                                   ; < DefaultPlatformMemoryConfiguration or reassign this pointer to its own table.
+                                   ; <
+  EnableParity                  BOOLEAN ?       ; < Parity control
+                                   ; <  TRUE = enable
+                                   ; <  FALSE = disable (AMD default)
+  EnableBankSwizzle             BOOLEAN ?       ; < BankSwizzle control
+                                   ; <  FALSE = disable
+                                   ; <  TRUE = enable  (AMD default)
+  EnableMemClr                  BOOLEAN ?       ; < Memory Clear functionality control
+                                   ; <  FALSE = disable
+                                   ; <  TRUE = enable  (AMD default)
+  ; Uma Configuration
+
+  UmaMode                       UMA_MODE ?       ; < Uma Mode
+                                   ; <  0 = None
+                                   ; <  1 = Specified
+                                   ; <  2 = Auto
+  UmaSize                       UINT32 ?       ; < The size of shared graphics dram (16-bits)
+                                   ; <  NV_UMA_Size[31:0]=Addr[47:16]
+                                   ; <
+  UmaBase                       UINT32 ?       ; < The allocated Uma base address (32-bits)
+                                   ; <  NV_UMA_Base[31:0]=Addr[47:16]
+                                   ; <
+
+   ; Memory Restore Feature
+
+  MemRestoreCtl                 BOOLEAN ?       ; < Memory context restore control
+                                   ; <   FALSE = perform memory init as normal (AMD default)
+                                   ; <   TRUE = restore memory context and skip training. This requires
+                                   ; <          MemContext is valid before AmdInitPost
+  SaveMemContextCtl             BOOLEAN ?       ; < Control switch to save memory context at the end of MemAuto
+                                   ; <   TRUE = AGESA will setup MemContext block before exit AmdInitPost
+                                   ; <   FALSE = AGESA will not setup MemContext block. Platform is
+                                   ; <           expected to call S3Save later in POST if it wants to
+                                   ; <           use memory context restore feature.
+  MemContext                    AMD_S3_PARAMS {}        ; < Memory context block describes the data that platform needs to
+                                   ; < save and restore for memory context restore feature to work.
+                                   ; < It uses the subset of S3Save block to save/restore. Hence platform
+                                   ; < may save only S3 block and uses it for both S3 resume and
+                                   ; < memory context restore.
+                                   ; <  - If MemRestoreCtl is TRUE, platform needs to pass in MemContext
+                                   ; <    before AmdInitPost.
+                                   ; <  - If SaveMemContextCtl is TRUE, platform needs to save MemContext
+                                   ; <    right after AmdInitPost.
+ ExternalVrefCtl                BOOLEAN ?      ; < Control the use of external Vref
+                                   ; <  TRUE = AGESA will use the function defined in "AGESA_EXTERNAL____TRAIN_VREF_CHANGE" in function list
+                                   ; <          to change the vref
+                                   ; <   FALSE = AGESA will will use the internal vref control.
+ ForceTrainMode                 FORCE_TRAIN_MODE ?       ; < Training Mode
+                                   ; <  0 = Force 1D Training for all configurations
+                                   ; <  1 = Force training for all configurations
+                                   ; <  2 = Auto - AGESA will control
+MEM_PARAMETER_STRUCT    ENDS
+
+
+; ===============================================================================
+ ; Function definition
+ ; This data structure passes function pointers to the memory configuration code.
+ ; The wrapper can use this structure with customized versions
+; ================================================================================
+MEM_FUNCTION_STRUCT    STRUCT
+
+   ; PUBLIC required Internal functions
+
+  amdMemGetPsCfgU       POINTER ?       ; < Proc for Unbuffered DIMMs, platform specific
+  amdMemGetPsCfgR       POINTER ?       ; < Proc for Registered DIMMs, platform specific
+
+   ; PUBLIC optional functions
+
+  amdMemEccInit         POINTER ?       ; < NB proc for ECC feature
+  amdMemChipSelectInterleaveInit        POINTER ?       ; < NB proc for CS interleave feature
+  amdMemDctInterleavingInit     POINTER ?       ; < NB proc for Channel interleave feature
+  amdMemMctInterleavingInit     POINTER ?       ; < NB proc for Node interleave feature
+  amdMemParallelTraining        POINTER ?       ; < NB proc for parallel training feature
+  amdMemEarlySampleSupport      POINTER ?       ; < NB code for early sample support feature
+  amdMemMultiPartInitSupport    POINTER ?       ; < NB code for 'multi-part'
+  amdMemOnlineSpareSupport      POINTER ?       ; < NB code for On-Line Spare feature
+  amdMemUDimmInit       POINTER ?       ; < NB code for UDIMMs
+  amdMemRDimmInit       POINTER ?       ; < NB code for RDIMMs
+  amdMemLrDimmInit       POINTER ?       ; < NB code for LRDIMMs
+  Reserved                      UINT32 (100) DUP (?)    ; < Reserved for later function definition
+MEM_FUNCTION_STRUCT    ENDS
+
+; ===============================================================================
+ ; Socket Structure
+
+; ===============================================================================
+MEM_SOCKET_STRUCT    STRUCT
+  ChannelPtr                    POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?)       ; < Pointers to each channels training data
+
+  TimingsPtr                    POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?)       ; < Pointers to each channels timing data
+
+MEM_SOCKET_STRUCT    ENDS
+
+; ===============================================================================
+ ; MEM_DATA_STRUCT
+; ===============================================================================
+MEM_DATA_STRUCT    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < AGESA Standard Header
+
+  ParameterListPtr              POINTER ?       ; < List of input Parameters
+
+  FunctionList                  MEM_FUNCTION_STRUCT {}          ; < List of function Pointers
+
+  GetPlatformCfg        POINTER (MAX_PLATFORM_TYPES) DUP (?)    ; < look-up platform info
+
+  ErrorHandling         POINTER ?     ; < Error Handling
+
+   ; SocketList is a shortcut for IBVs to retrieve training
+   ; and timing data for each channel indexed by socket/channel,
+   ; eliminating their need to parse die/dct/channel etc.
+   ; It contains pointers to the populated data structures for
+   ; each channel and skips the channel structures that are
+   ; unpopulated. In the case of channels sharing the same DCT,
+   ; the pTimings pointers will point to the same DCT Timing data.
+
+  SocketList                    MEM_SOCKET_STRUCT (MAX_SOCKETS_SUPPORTED) DUP ({})      ; < Socket list for memory code
+
+  DiesPerSystem                 POINTER ?       ; < Pointed to an array of DIE_STRUCTs
+  DieCount                      UINT8 ?         ; < Number of MCTs in the system.
+
+  SpdDataStructure              POINTER ?       ; < Pointer to SPD Data structure
+
+  PlatFormConfig              POINTER ?       ; < Pointer to Platform profile/build option config structure
+
+  IsFlowControlSupported                  BOOLEAN ?       ; < Indicates if flow control is supported
+
+  TscRate                       UINT32 ?        ; < The rate at which the TSC increments in megahertz.
+
+MEM_DATA_STRUCT    ENDS
+
+; ===============================================================================
+; UMA_INFO_STRUCT
+; ===============================================================================
+UMA_INFO      STRUCT
+  UmaBase         UINT64 ?        ; < UmaBase[63:0] = Addr[63:0]
+  UmaSize         UINT32 ?        ; < UmaSize[31:0] = Addr[31:0]
+  UmaAttributes   UINT32 ?        ; < Indicate the attribute of Uma
+  UmaMode         UINT8 ?         ; < Indicate the mode of Uma
+  MemClock        UINT16 ?        ; < Indicate memory running speed in MHz
+  Reserved        UINT8 (3) DUP (?)         ; < Reserved for future usage
+UMA_INFO      ENDS
+
+; ===============================================================================
+; Bitfield for ID
+; ===============================================================================
+ID_FIELD      STRUCT
+  SocketId        UINT16 ?
+;  OUT UINT16 SocketId:8;         ; < Socket ID
+;  OUT UINT16 ModuleId:8;         ; < Module ID
+ID_FIELD      ENDS
+
+; ===============================================================================
+; Union for ID of socket and module that will be passed out in call out
+; ===============================================================================
+ID_INFO      UNION
+  IdField         ID_FIELD {}     ; < Bitfield for ID
+  IdInformation   UINT16 ?        ; < ID information for call out
+ID_INFO      ENDS
+
+  ; AGESA MEMORY ERRORS
+
+ ; AGESA_ALERT Memory Errors
+MEM_ALERT_USER_TMG_MODE_OVERRULED   EQU    04010000h     ; < TIMING_MODE_SPECIFIC is requested but
+                                                       ; < cannot be applied to current configurations.
+MEM_ALERT_ORG_MISMATCH_DIMM         EQU    04010100h     ; < DIMM organization miss-match
+MEM_ALERT_BK_INT_DIS                EQU    04010200h     ; < Bank interleaving disable for internal issue
+
+ ; AGESA_ERROR Memory Errors
+MEM_ERROR_NO_DQS_POS_RD_WINDOW            EQU   04010300h     ; < No DQS Position window for RD DQS
+MEM_ERROR_SMALL_DQS_POS_RD_WINDOW         EQU   04020300h     ; < Small DQS Position window for RD DQS
+MEM_ERROR_NO_DQS_POS_WR_WINDOW            EQU   04030300h     ; < No DQS Position window for WR DQS
+MEM_ERROR_SMALL_DQS_POS_WR_WINDOW         EQU   04040300h     ; < Small DQS Position window for WR DQS
+MEM_ERROR_ECC_DIS                         EQU   04010400h     ; < ECC has been disabled as a result of an internal issue
+MEM_ERROR_DIMM_SPARING_NOT_ENABLED        EQU   04010500h     ; < DIMM sparing has not been enabled for an internal issues
+MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE         EQU   04050300h     ; < Receive Enable value is too large
+MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW       EQU   04060300h     ; < There is no DQS receiver enable window
+MEM_ERROR_DRAM_ENABLED_TIME_OUT           EQU   04010600h     ; < Time out when polling DramEnabled bit
+MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT        EQU   04010700h     ; < Time out when polling DctAccessDone bit
+MEM_ERROR_SEND_CTRL_WORD_TIME_OUT         EQU   04010800h     ; < Time out when polling SendCtrlWord bit
+MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT   EQU   04010900h     ; < Time out when polling PrefDramTrainMode bit
+MEM_ERROR_ENTER_SELF_REF_TIME_OUT         EQU   04010A00h     ; < Time out when polling EnterSelfRef bit
+MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT       EQU   04010B00h     ; < Time out when polling FreqChgInProg bit
+MEM_ERROR_EXIT_SELF_REF_TIME_OUT          EQU   04020A00h     ; < Time out when polling ExitSelfRef bit
+MEM_ERROR_SEND_MRS_CMD_TIME_OUT           EQU   04010C00h     ; < Time out when polling SendMrsCmd bit
+MEM_ERROR_SEND_ZQ_CMD_TIME_OUT            EQU   04010D00h     ; < Time out when polling SendZQCmd bit
+MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT  EQU   04010E00h     ; < Time out when polling DctExtraAccessDone bit
+MEM_ERROR_MEM_CLR_BUSY_TIME_OUT           EQU   04010F00h     ; < Time out when polling MemClrBusy bit
+MEM_ERROR_MEM_CLEARED_TIME_OUT            EQU   04020F00h     ; < Time out when polling MemCleared bit
+MEM_ERROR_FLUSH_WR_TIME_OUT               EQU   04011000h     ; < Time out when polling FlushWr bit
+MEM_ERROR_MAX_LAT_NO_WINDOW               EQU   04070300h     ; < Fail to find pass during Max Rd Latency training
+MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL   EQU   04080300h     ; < Fail to launch training code on an AP
+MEM_ERROR_PARALLEL_TRAINING_TIME_OUT      EQU   04090300h     ; < Fail to finish parallel training
+MEM_ERROR_NO_ADDRESS_MAPPING              EQU   04011100h     ; < No address mapping found for a dimm
+MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT  EQU   040A0300h ; < There is no DQS receiver enable window and the value is equal to the largest value
+MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE EQU   040B0300h ; < Receive Enable value is too large and is 1 less than limit
+MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR EQU    04011200h    ; < SPD Checksum error for NV_SPDCHK_RESTRT
+MEM_ERROR_NO_CHIPSELECT                   EQU   04011300h     ; < No chipselects found
+MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM        EQU   04011500h     ; < Unbuffered dimm is not supported at 333MHz
+MEM_ERROR_WL_PRE_OUT_OF_RANGE             EQU   040C0300h     ; < Returned PRE value during write levelization was out of range
+MEM_ERROR_NO____RDDQS_WINDOW              EQU   040D0300h     ; < No RdDqs Window
+MEM_ERROR_NO____RDDQS_HEIGHT              EQU   040E0300h     ; < No RdDqs Height
+MEM_ERROR____DQS_ERROR                    EQU   040F0300h     ; < RdDqs Error
+MEM_ERROR_INVALID____RDDQS_VALUE          EQU   04022400h     ; < RdDqs invalid value found
+MEM_ERROR____DQS_VREF_MARGIN_ERROR        EQU   04023400h     ; < RdDqs Vef Margin error found
+MEM_ERROR_LR_IBT_NOT_FOUND                EQU   04013500h     ; < No LR dimm IBT value is found
+MEM_ERROR_MR0_NOT_FOUND                   EQU   04023500h     ; < No MR0 value is found
+MEM_ERROR_ODT_PATTERN_NOT_FOUND           EQU   04033500h     ; < No odt pattern value is found
+MEM_ERROR_RC2_IBT_NOT_FOUND               EQU   04043500h     ; < No RC2 IBT value is found
+MEM_ERROR_RC10_OP_SPEED_NOT_FOUND         EQU   04053500h     ; < No RC10 op speed is found
+MEM_ERROR_RTT_NOT_FOUND                   EQU   04063500h     ; < No RTT value is found
+MEM_ERROR_P___NOT_FOUND                   EQU   04073500h     ; < No training config value is found
+MEM_ERROR_SAO_NOT_FOUND                   EQU   04083500h     ; < No slow access mode, Address timing and Output driver compensation value is found
+MEM_ERROR_CLK_DIS_MAP_NOT_FOUND           EQU   04093500h     ; < No CLK disable map is found
+MEM_ERROR_CKE_TRI_MAP_NOT_FOUND           EQU   040A3500h     ; < No CKE tristate map is found
+MEM_ERROR_ODT_TRI_MAP_NOT_FOUND           EQU   040B3500h     ; < No ODT tristate map is found
+MEM_ERROR_CS_TRI_MAP_NOT_FOUND            EQU   040C3500h     ; < No CS tristate map is found
+MEM_ERROR_TRAINING_SEED_NOT_FOUND         EQU   040D3500h     ; < No training seed is found
+
+ ; AGESA_WARNING Memory Errors
+    MEM_WARNING_UNSUPPORTED_QRDIMM      EQU    04011600h     ; < QR DIMMs detected but not supported
+    MEM_WARNING_UNSUPPORTED_UDIMM       EQU    04021600h     ; < U DIMMs detected but not supported
+    MEM_WARNING_UNSUPPORTED_SODIMM      EQU    04031600h     ; < SO-DIMMs detected but not supported
+    MEM_WARNING_UNSUPPORTED_X4DIMM      EQU    04041600h     ; < x4 DIMMs detected but not supported
+    MEM_WARNING_UNSUPPORTED_RDIMM       EQU    04051600h     ; < R DIMMs detected but not supported
+    MEM_WARNING_UNSUPPORTED_LRDIMM      EQU    04061600h     ; < LR DIMMs detected but not supported
+
+    MEM_WARNING_EMP_NOT_SUPPORTED       EQU    04011700h     ; < Processor is not capable for EMP
+    MEM_WARNING_EMP_CONFLICT    EQU    04021700h      ; < EMP cannot be enabled if channel interleaving,
+                                                        ; < bank interleaving, or bank swizzle is enabled.
+    MEM_WARNING_EMP_NOT_ENABLED EQU    04031700h      ; < Memory size is not power of two.
+    MEM_WARNING_ECC_DIS         EQU    04041700h      ; < ECC has been disabled as a result of an internal issue
+    MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED EQU 04011800h  ; < Performance has been enabled, but battery life is preferred.
+    MEM_WARNING_NO_SPDTRC_FOUND EQU    04011900h      ; < No Trc timing value found in SPD of a dimm.
+    MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED     EQU     04012000h    ; < Node Interleaveing Requested, but could not be enabled
+    MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED  EQU     04012100h    ; < Channel Interleaveing Requested, but could not be enabled
+    MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED     EQU     04012200h    ; < Bank Interleaveing Requested, but could not be enabled
+    MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED        EQU     04012300h    ; < Voltage 1.35 determined, but could not be supported
+    MEM_WARNING_INITIAL_DDR3VOLT_NONZERO          EQU     04012400h    ; < DDR3 voltage initial value is not 0
+    MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO       EQU     04012500h    ; < Cannot find a commonly supported VDDIO
+
+ ; AGESA_FATAL Memory Errors
+    MEM_ERROR_MINIMUM_MODE      EQU    04011A00h                   ; < Running in minimum mode
+    MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM EQU    04011B00h      ; < DIMM modules are miss-matched
+    MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM    EQU    04011C00h     ; < No DIMMs have been found on system
+    MEM_ERROR_MISMATCH_DIMM_CLOCKS      EQU    04011D00h          ; < DIMM clocks miss-matched
+    MEM_ERROR_NO_CYC_TIME       EQU    04011E00h                    ; < No cycle time found
+    MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS   EQU    04011F00h ; < Heap allocation error with dynamic storing of trained timings
+    MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs   EQU    04021F00h ; < Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT
+    MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV   EQU    04031F00h ; < Heap allocation error with REMOTE_TRAINING_ENV
+    MEM_ERROR_HEAP_ALLOCATE_FOR_SPD     EQU    04041F00h    ; < Heap allocation error for SPD data
+    MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA     EQU    04051F00h    ; < Heap allocation error for RECEIVED_DATA during parallel training
+    MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS     EQU    04061F00h    ; < Heap allocation error for S3 "SPECIAL_CASE_REGISTER"
+    MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA     EQU    04071F00h    ; < Heap allocation error for Training Data
+    MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK     EQU    04081F00h   ; < Heap allocation error for  DIMM Identify "MEM_NB_BLOCK
+    MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM    EQU    04022300h    ; < No Constructor for DIMM Identify
+    MEM_ERROR_VDDIO_UNSUPPORTED   EQU   04022500h     ; < VDDIO of the dimms on the board is not supported
+    MEM_ERROR_HEAP_ALLOCATE_FOR___   EQU  040B1F00h    ; < Heap allocation error for training data
+    MEM_ERROR_HEAP_DEALLOCATE_FOR___  EQU     040C1F00h  ; < Heap de-allocation error for training data
+
+ ; AGESA_CRITICAL Memory Errors
+    MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3     EQU    04091F00h    ; < Heap allocation error for DMI table for DDR3
+    MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2     EQU    040A1F00h    ; < Heap allocation error for DMI table for DDR2
+    MEM_ERROR_UNSUPPORTED_DIMM_CONFIG    EQU   04011400h          ; < Dimm population is not supported
+
+
+; ----------------------------------------------------------------------------
+; *
+; *                END OF MEMORY-SPECIFIC DATA STRUCTURES
+; *
+; *----------------------------------------------------------------------------
+;
+
+
+; ----------------------------------------------------------------------------
+; *
+; *                    CPU RELATED DEFINITIONS
+; *
+; *----------------------------------------------------------------------------
+;
+
+; CPU Event definitions.
+
+; Defines used to filter CPU events based on functional blocks
+CPU_EVENT_PM_EVENT_MASK                         EQU   0FF00FF00h
+CPU_EVENT_PM_EVENT_CLASS                        EQU   008000400h
+
+;================================================================
+; CPU General events
+;    Heap allocation                    (AppFunction =     01h)
+CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT            EQU   008000100h
+CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED           EQU   008010100h
+CPU_ERROR_HEAP_IS_FULL                          EQU   008020100h
+CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED    EQU   008030100h
+CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT     EQU   008040100h
+;    BrandId                            (AppFunction =     02h)
+CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE            EQU   008000200h
+;    Micro code patch                   (AppFunction =     03h)
+CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED        EQU   008000300h
+;    Power management                   (AppFunction =     04h)
+CPU_EVENT_PM_PSTATE_OVERCURRENT                 EQU   008000400h
+CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT             EQU   008010400h
+CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE             EQU   008020400h
+CPU_ERROR_PM_NB_PSTATE_MISMATCH                 EQU   008030400h
+;   Other CPU events                    (AppFunction =     05h)
+CPU_EVENT_BIST_ERROR                            EQU   008000500h
+CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY              EQU   008010500h
+CPU_EVENT_STACK_REENTRY                         EQU   008020500h
+CPU_EVENT_CORE_NOT_IDENTIFIED                   EQU   008030500h
+;=================================================================
+; CPU Feature events
+;    Execution cache                    (AppFunction =     21h)
+;        AGESA_CACHE_SIZE_REDUCED                          2101
+;        AGESA_CACHE_REGIONS_ACROSS_1MB                    2102
+;        AGESA_CACHE_REGIONS_ACROSS_4GB                    2103
+;        AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY              2104
+;        AGESA_CACHE_START_ADDRESS_LESS_D0000              2105
+;        AGESA_THREE_CACHE_REGIONS_ABOVE_1MB               2106
+;        AGESA_DEALLOCATE_CACHE_REGIONS                    2107
+CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR      EQU   008002100h
+;    Core Leveling                      (AppFunction =     22h)
+CPU_WARNING_ADJUSTED_LEVELING_MODE              EQU   008002200h
+;    HT Assist                          (AppFunction =     23h)
+CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG            EQU   008002300h
+
+; CPU Build Configuration structures and definitions
+
+; Build Configuration values for BLDGCFG_AP_MTRR_SETTINGS
+AP_MTRR_SETTINGS  STRUCT
+  MsrAddr       UINT32 ?  ; < Fixed-Sized MTRR address
+  MsrData       UINT64 ?  ; < MTRR Settings
+AP_MTRR_SETTINGS  ENDS
+
+AMD_AP_MTRR_FIX64k_00000    EQU 000000250h
+AMD_AP_MTRR_FIX16k_80000    EQU 000000258h
+AMD_AP_MTRR_FIX16k_A0000    EQU 000000259h
+AMD_AP_MTRR_FIX4k_C0000     EQU 000000268h
+AMD_AP_MTRR_FIX4k_C8000     EQU 000000269h
+AMD_AP_MTRR_FIX4k_D0000     EQU 00000026Ah
+AMD_AP_MTRR_FIX4k_D8000     EQU 00000026Bh
+AMD_AP_MTRR_FIX4k_E0000     EQU 00000026Ch
+AMD_AP_MTRR_FIX4k_E8000     EQU 00000026Dh
+AMD_AP_MTRR_FIX4k_F0000     EQU 00000026Eh
+AMD_AP_MTRR_FIX4k_F8000     EQU 00000026Fh
+CPU_LIST_TERMINAL           EQU 0FFFFFFFFh
+
+; ***********************************************************************
+; *
+; *  AGESA interface Call-Out function parameter structures
+; *
+; **********************************************************************
+
+ ; Parameters structure for interface call-out AgesaAllocateBuffer
+AGESA_BUFFER_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Standard header
+  BufferLength                  UINT32 ?        ; < Size of buffer to allocate
+  BufferHandle                  UINT32 ?        ; < Identifier or name for the buffer
+  BufferPointer                 POINTER ?       ; < location of the created buffer
+AGESA_BUFFER_PARAMS    ENDS
+
+ ; Parameters structure for interface call-out AgesaRunCodeOnAp
+AP_EXE_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Standard header
+  FunctionNumber                UINT32 ?        ; < Index of the procedure to execute
+  RelatedDataBlock              POINTER ?       ; < Location of data structure the procedure will use
+  RelatedBlockLength            UINT32 ?        ; < Size of the related data block
+AP_EXE_PARAMS    ENDS
+
+ ; Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery
+AGESA_READ_SPD_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < standard header
+  SocketId                      UINT8 ?         ; < Address of SPD - socket ID
+  MemChannelId                  UINT8 ?         ; < Address of SPD - memory channel ID
+  DimmId                        UINT8 ?         ; < Address of SPD - DIMM ID
+  Buffer                        POINTER ?       ; < Location where to place the SPD content
+  MemData                       POINTER ?       ; < Location of the MemData structure, for reference
+AGESA_READ_SPD_PARAMS    ENDS
+
+ ; Buffer Handles
+  AMD_DMI_INFO_BUFFER_HANDLE    EQU    000D000h ; < Assign 0x000D000 buffer handle to DMI function
+  AMD_PSTATE_DATA_BUFFER_HANDLE EQU    000D001h ; < Assign 0x000D001 buffer handle to Pstate data
+  AMD_PSTATE_ACPI_BUFFER_HANDLE EQU    000D002h ; < Assign 0x000D002 buffer handle to Pstate table
+  AMD_BRAND_ID_BUFFER_HANDLE    EQU    000D003h ; < Assign 0x000D003 buffer handle to Brand ID
+  AMD_ACPI_SLIT_BUFFER_HANDLE   EQU    000D004h ; < Assign 0x000D004 buffer handle to SLIT function
+  AMD_SRAT_INFO_BUFFER_HANDLE   EQU    000D005h ; < Assign 0x000D005 buffer handle to SRAT function
+  AMD_WHEA_BUFFER_HANDLE        EQU    000D006h ; < Assign 0x000D006 buffer handle to WHEA function
+  AMD_S3_INFO_BUFFER_HANDLE     EQU    000D007h ; < Assign 0x000D007 buffer handle to S3 function
+  AMD_S3_NB_INFO_BUFFER_HANDLE  EQU    000D008h ; < Assign 0x000D008 buffer handle to S3 NB device info
+  AMD_ACPI_ALIB_BUFFER_HANDLE   EQU    000D009h ; < Assign 0x000D009 buffer handle to ALIB SSDT table
+  AMD_ACPI_IVRS_BUFFER_HANDLE   EQU    000D00Ah ; < Assign 0x000D00A buffer handle to IOMMU IVRS table
+AMD_BUFFER_HANDLE  TEXTEQU  <DWORD>
+; ***********************************************************************
+; *
+; *  AGESA interface Call-Out function prototypes
+; *
+; **********************************************************************
+
+; ***********************************************************************
+; *
+; *  AGESA interface structure definition and function prototypes
+; *
+; **********************************************************************
+
+; *********************************************************************
+; * Platform Configuration:  The parameters in boot branch function
+; *********************************************************************
+
+;   The possible platform control flow settings.
+  Nfcm                          EQU  0            ; < Normal Flow Control Mode.
+  UmaDr                         EQU  1            ; < UMA using Display Refresh flow control.
+  UmaIfcm                       EQU  2            ; < UMA using Isochronous Flow Control.
+  Ifcm                          EQU  3            ; < Isochronous Flow Control Mode (other than for UMA).
+  Iommu                         EQU  4            ; < An IOMMU is in use in the system.
+  MaxControlFlow                EQU  5            ; < Not a control flow mode, use for limit checking.
+PLATFORM_CONTROL_FLOW  TEXTEQU  <DWORD>
+
+;   Platform Deemphasis Levels.
+  DeemphasisLevelNone            EQU  0           ; < No Deemphasis.
+  DeemphasisLevelMinus3          EQU  1           ; < Minus 3 db deemphasis.
+  DeemphasisLevelMinus6          EQU  2           ; < Minus 6 db deemphasis.
+  DeemphasisLevelMinus8          EQU  3           ; < Minus 8 db deemphasis.
+  DeemphasisLevelMinus11         EQU  4           ; < Minus 11 db deemphasis.
+  DeemphasisLevelMinus11pre8     EQU  5           ; < Minus 11, Minus 8 precursor db deemphasis.
+  DcvLevelNone                   EQU  16          ; < No DCV Deemphasis.
+  DcvLevelMinus2                 EQU  17          ; < Minus 2 db DCV deemphasis.
+  DcvLevelMinus3                 EQU  18          ; < Minus 3 db DCV deemphasis.
+  DcvLevelMinus5                 EQU  19          ; < Minus 5 db DCV deemphasis.
+  DcvLevelMinus6                 EQU  20          ; < Minus 6 db DCV deemphasis.
+  DcvLevelMinus7                 EQU  21          ; < Minus 7 db DCV deemphasis.
+  DcvLevelMinus8                 EQU  22          ; < Minus 8 db DCV deemphasis.
+  DcvLevelMinus9                 EQU  23          ; < Minus 9 db DCV deemphasis.
+  DcvLevelMinus11                EQU  24          ; < Minus 11 db DCV deemphasis.
+  MaxPlatformDeemphasisLevel     EQU  25          ; < Not a deemphasis level, use for limit checking.
+PLATFORM_DEEMPHASIS_LEVEL  TEXTEQU  <DWORD>
+
+;   Provide Deemphasis Levels for HT Links.
+;
+;   For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will
+;   be checked for a match. The item matches for a Socket, Link if the link frequency is
+;   is in the inclusive range HighFreq:LoFreq.
+;   AGESA does not set deemphasis in IO devices, only in processors.
+
+CPU_HT_DEEMPHASIS_LEVEL STRUCT
+  ; Match fields
+  Socket                   UINT8  ?               ; < One Socket on which this Link is located
+  Link                     UINT8  ?               ; < The Link on this Processor.
+  LoFreq                   UINT8  ?               ; < If the link is set to this frequency or greater, apply these levels, and
+  HighFreq                 UINT8  ?               ; < If the link is set to this frequency or less, apply these levels.
+  ; Value fields
+  ReceiverDeemphasis       PLATFORM_DEEMPHASIS_LEVEL ? ; < The deemphasis level for this link
+  DcvDeemphasis            PLATFORM_DEEMPHASIS_LEVEL ? ; < The DCV, or far transmitter deemphasis level.
+CPU_HT_DEEMPHASIS_LEVEL ENDS
+
+;  The possible hardware prefetch mode settings.
+  HARDWARE_PREFETCHER_AUTO         EQU  0           ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+  DISABLE_L1_PREFETCHER            EQU  1           ; Use the recommended settings for the hardware prefetcher, but disable L1 prefetching.
+  DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES  EQU 2  ; Use the recommended setting for the hardware prefetcher, but disable training on software prefetches.
+  DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES  EQU 3  ; Use the recommended settings for the hardware prefetcher, but disable both the L1 prefetcher and training on software prefetches.
+  DISABLE_HARDWARE_PREFETCH        EQU  4           ; Disable hardware prefetching.
+  MAX_HARDWARE_PREFETCH_MODE       EQU  5           ; Not a hardware prefetch mode, use for limit checking.
+HARDWARE_PREFETCH_MODE  TEXTEQU  <DWORD>
+
+;  The possible software prefetch mode settings.
+  SOFTWARE_PREFETCHES_AUTO         EQU  0           ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+  DISABLE_SOFTWARE_PREFETCHES      EQU  1           ; Disable software prefetches (convert software prefetch instructions to NOP).
+  MAX_SOFTWARE_PREFETCH_MODE       EQU  2           ; Not a software prefetch mode, use for limit checking.
+SOFTWARE_PREFETCH_MODE TEXTEQU  <DWORD>
+
+; Advanced performance tunings, prefetchers.
+; These settings provide for performance tuning to optimize for specific workloads.
+ADVANCED_PERFORMANCE_PROFILE STRUCT
+  HardwarePrefetchMode          HARDWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the hardware prefetcher setting.
+  SoftwarePrefetchMode          SOFTWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the software prefetch instructions.
+  DramPrefetchMode              DRAM_PREFETCH_MODE ?     ; This value provides for advanced performance tuning by controlling the DRAM prefetcher setting.
+ADVANCED_PERFORMANCE_PROFILE ENDS
+
+;   The possible platform power policy settings.
+  Performance                    EQU  0           ; < Optimize for performance.
+  BatteryLife                    EQU  1           ; < Optimize for battery life.
+  MaxPowerPolicy                 EQU  2           ; < Not a power policy mode, use for limit checking.
+PLATFORM_POWER_POLICY  TEXTEQU  <DWORD>
+
+; Platform performance settings for optimized settings.
+; Several configuration settings for the processor depend upon other parts and
+; general designer choices for the system. The determination of these data points
+; is not standard for all platforms, so the host environment needs to provide these
+; to specify how the system is to be configured.
+PERFORMANCE_PROFILE    STRUCT
+  PlatformControlFlowMode       PLATFORM_CONTROL_FLOW ?  ; < The platform's control flow mode for optimum platform performance.
+  UseHtAssist                   BOOLEAN ?       ; < HyperTransport link traffic optimization.
+  UseAtmMode                    BOOLEAN ?       ; < HyperTransport link traffic optimization.
+  Use32ByteRefresh              BOOLEAN ?       ; < Display Refresh traffic generates 32 byte requests.
+  UseVariableMctIsocPriority    BOOLEAN ?       ; < The Memory controller will be set to Variable Isoc Priority.
+  AdvancedPerformanceProfile ADVANCED_PERFORMANCE_PROFILE {}  ; < The advanced platform performance settings.
+  PlatformPowerPolicy           PLATFORM_POWER_POLICY ?  ; < The platform's desired power policy
+PERFORMANCE_PROFILE    ENDS
+
+; Platform settings that describe the voltage regulator modules of the system.
+; Many power management settings are dependent upon the characteristics of the
+; on-board voltage regulator module (VRM).  The host environment needs to provide
+; these to specify how the system is to be configured.
+PLATFORM_VRM_CONFIGURATION   STRUCT
+  CurrentLimit                  UINT32 ?         ; < Vrm Current Limit.
+  LowPowerThreshold             UINT32 ?         ; < Vrm Low Power Threshold.
+  SlewRate                      UINT32 ?         ; < Vrm Slew Rate.
+  AdditionalDelay               UINT32 ?         ; < Vrm Additional Delay.
+  HiSpeedEnable                 BOOLEAN ?        ; < Select high speed VRM.
+  InrushCurrentLimit            UINT32 ?         ; < Vrm Inrush Current Limit.
+PLATFORM_VRM_CONFIGURATION   ENDS
+
+;   The VRM types to characterize.
+  CoreVrm                        EQU  0           ; < VDD plane.
+  NbVrm                          EQU  1           ; < VDDNB plane.
+  MaxVrmType                     EQU  2           ; < Not a valid VRM type, use for limit checking.
+PLATFORM_VRM_TYPE  TEXTEQU  <DWORD>
+
+; FCH Platform Configuration Policy
+FCH_PLATFORM_POLICY     STRUCT
+  CfgSmbus0BaseAddress          UINT16  ?       ; SMBUS0 Controller Base Address
+  CfgSmbus1BaseAddress          UINT16  ?       ; SMBUS1 Controller Base Address
+  CfgSioPmeBaseAddress          UINT16  ?       ; I/O base address for LPC I/O target range
+  CfgAcpiPm1EvtBlkAddr          UINT16  ?       ; I/O base address of ACPI power management Event Block
+  CfgAcpiPm1CntBlkAddr          UINT16  ?       ; I/O base address of ACPI power management Control Block
+  CfgAcpiPmTmrBlkAddr           UINT16  ?       ; I/O base address of ACPI power management Timer Block
+  CfgCpuControlBlkAddr          UINT16  ?       ; I/O base address of ACPI power management CPU Control Block
+  CfgAcpiGpe0BlkAddr            UINT16  ?       ; I/O base address of ACPI power management General Purpose Event Block
+  CfgSmiCmdPortAddr             UINT16  ?       ; I/O base address of ACPI SMI Command Block
+  CfgAcpiPmaCntBlkAddr          UINT16  ?       ; I/O base address of ACPI power management additional control block
+  CfgGecShadowRomBase           UINT32  ?       ; 32-bit base address to the GEC shadow ROM
+  CfgWatchDogTimerBase          UINT32  ?       ; Watchdog Timer base address
+  CfgSpiRomBaseAddress          UINT32  ?       ; Base address for the SPI ROM controller
+  CfgHpetBaseAddress            UINT32  ?       ; HPET MMIO base address
+  CfgAzaliaSsid                 UINT32  ?       ; Subsystem ID of HD Audio controller
+  CfgSmbusSsid                  UINT32  ?       ; Subsystem ID of SMBUS controller
+  CfgIdeSsid                    UINT32  ?       ; Subsystem ID of IDE controller
+  CfgSataAhciSsid               UINT32  ?       ; Subsystem ID of SATA controller in AHCI mode
+  CfgSataIdeSsid                UINT32  ?       ; Subsystem ID of SATA controller in IDE mode
+  CfgSataRaid5Ssid              UINT32  ?       ; Subsystem ID of SATA controller in RAID5 mode
+  CfgSataRaidSsid               UINT32  ?       ; Subsystem ID of SATA controller in RAID mode
+  CfgEhciSsid                   UINT32  ?       ; Subsystem ID of EHCI
+  CfgOhciSsid                   UINT32  ?       ; Subsystem ID of OHCI
+  CfgLpcSsid                    UINT32  ?       ; Subsystem ID of LPC ISA Bridge
+  CfgSdSsid                     UINT32  ?       ; Subsystem ID of SecureDigital controller
+  CfgXhciSsid                   UINT32  ?       ; Subsystem ID of XHCI
+  CfgFchPort80BehindPcib        BOOLEAN ?       ; Is port80 cycle going to the PCI bridge
+  CfgFchEnableAcpiSleepTrap     BOOLEAN ?       ; ACPI sleep SMI enable/disable
+  CfgFchGppLinkConfig           GPP_LINKMODE ?  ; FCH GPP link configuration
+  CfgFchGppPort0Present         BOOLEAN ?       ; Is FCH GPP port 0 present
+  CfgFchGppPort1Present         BOOLEAN ?       ; Is FCH GPP port 1 present
+  CfgFchGppPort2Present         BOOLEAN ?       ; Is FCH GPP port 2 present
+  CfgFchGppPort3Present         BOOLEAN ?       ; Is FCH GPP port 3 present
+  CfgFchGppPort0HotPlug         BOOLEAN ?       ; Is FCH GPP port 0 hotplug capable
+  CfgFchGppPort1HotPlug         BOOLEAN ?       ; Is FCH GPP port 1 hotplug capable
+  CfgFchGppPort2HotPlug         BOOLEAN ?       ; Is FCH GPP port 2 hotplug capable
+  CfgFchGppPort3HotPlug         BOOLEAN ?       ; Is FCH GPP port 3 hotplug capable
+
+  CfgFchEsataPortBitMap         UINT8 ?         ; ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable
+  CfgFchIrPinControl            UINT8 ?         ; Register bitfield describing Infrared Pin Control:
+  CfgFchSdClockControl       SD_CLOCK_CONTROL ? ; FCH SD Clock Control
+  CfgFchSciMapControl           POINTER ?       ; FCH SCI Mapping Control
+  CfgFchSataPhyControl          POINTER ?       ; FCH SATA PHY Control
+  CfgFchGpioControl             POINTER ?       ; FCH GPIO Control
+FCH_PLATFORM_POLICY     ENDS
+
+
+; Build Option/Configuration Boolean Structure
+BUILD_OPT_CFG    STRUCT
+  ; Build Option Area
+  VersionString                 AMD_CODE_HEADER {} ; < AMD embedded code version string
+  OptionUDimms                  BOOLEAN ?       ; < UDIMMS
+  OptionRDimms                  BOOLEAN ?       ; < RDIMMS
+  OptionLrDimms                 BOOLEAN ?       ; < LRDIMMS
+  OptionEcc                     BOOLEAN ?       ; < ECC
+  OptionBankInterleave          BOOLEAN ?       ; < BANK_INTERLEAVE
+  OptionDctInterleave           BOOLEAN ?       ; < DCT_INTERLEAVE
+  OptionNodeInterleave          BOOLEAN ?       ; < NODE_INTERLEAVE
+  OptionParallelTraining        BOOLEAN ?       ; < PARALLEL_TRAINING
+  OptionOnlineSpare             BOOLEAN ?       ; < ONLINE_SPARE
+  OptionMemRestore              BOOLEAN ?       ; < MEM CONTEXT RESTORE
+  OptionMultisocket             BOOLEAN ?       ; < MULTISOCKET
+  OptionAcpiPstates             BOOLEAN ?       ; < ACPI_PSTATES
+  OptionPStatesInHpcMode        BOOLEAN ?       ; < PSTATES_HPC_MODE
+  OptionSrat                    BOOLEAN ?       ; < SRAT
+  OptionSlit                    BOOLEAN ?       ; < SLIT
+  OptionWhea                    BOOLEAN ?       ; < WHEA
+  OptionDmi                     BOOLEAN ?       ; < DMI
+  OptionEarlySamples            BOOLEAN ?       ; < EARLY_SAMPLES
+  OptionAddrToCsTranslator      BOOLEAN ?       ; < ADDR_TO_CS_TRANSLATOR
+
+  ; Build Configuration Area
+  CfgPciMmioAddress             UINT64 ?        ; < PciMmioBase
+  CfgPciMmioSize                UINT32 ?        ; < PciMmioSize
+  CfgPlatVrmCfg                 PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({})  ; < Several configuration settings for the voltage regulator modules.
+  CfgPlatNumIoApics             UINT32 ?        ; < PlatformApicIoNumber
+  CfgMemInitPstate              UINT32 ?        ; < MemoryInitPstate
+  CfgPlatformC1eMode            PLATFORM_C1E_MODES ?  ; < PlatformC1eMode
+  CfgPlatformC1eOpData          UINT32 ?        ; < PlatformC1eOpData
+  CfgPlatformC1eOpData1         UINT32 ?        ; < PlatformC1eOpData1
+  CfgPlatformC1eOpData2         UINT32 ?        ; < PlatformC1eOpData2
+  CfgPlatformC1eOpData3         UINT32 ?        ; < PlatformC1eOpData3
+  CfgPlatformCStateMode         PLATFORM_CSTATE_MODES ?  ; < PlatformCStateMode
+  CfgPlatformCStateOpData       UINT32 ?        ; < PlatformCStateOpData
+  CfgPlatformCStateIoBaseAddress UINT16 ?       ; < PlatformCStateIoBaseAddress
+  CfgPlatformCpbMode            PLATFORM_CPB_MODES ?  ; < PlatformCpbMode
+  CfgLowPowerPstateForProcHot   PLATFORM_LOW_POWER_PSTATE_MODES ?  ; < Low power Pstate for PROCHOT mode
+  CfgCoreLevelingMode           UINT32 ?        ; < CoreLevelingCofig
+  CfgPerformanceProfile         PERFORMANCE_PROFILE  {}  ; < The platform's control flow mode and platform performance settings.
+  CfgPlatformDeemphasisList     POINTER  ?      ; < HT Deemphasis
+  CfgAmdPlatformType            UINT32 ?        ; < AmdPlatformType
+  CfgAmdPstateCapValue          UINT32 ?        ; < Amd pstate ceiling enabling deck
+
+  CfgMemoryBusFrequencyLimit    MEMORY_BUS_SPEED ?      ; < Memory Bus Frequency Limit
+  CfgMemoryModeUnganged         BOOLEAN ?       ; < Memory Mode Unganged
+  CfgMemoryQuadRankCapable      BOOLEAN ?       ; < Memory Quad Rank Capable
+  CfgMemoryQuadrankType         QUANDRANK_TYPE ?        ; < Memory Quadrank Type
+  CfgMemoryRDimmCapable         BOOLEAN ?       ; < Memory RDIMM Capable
+  CfgMemoryLRDimmCapable         BOOLEAN ?       ; < Memory LRDIMM Capable
+  CfgMemoryUDimmCapable         BOOLEAN ?       ; < Memory UDIMM Capable
+  CfgMemorySODimmCapable        BOOLEAN ?       ; < Memory SODimm Capable
+  CfgLimitMemoryToBelow1Tb      BOOLEAN ?       ; < Limit memory address space to below 1TB
+  CfgMemoryEnableBankInterleaving       BOOLEAN ?       ; < Memory Enable Bank Interleaving
+  CfgMemoryEnableNodeInterleaving       BOOLEAN ?       ; < Memory Enable Node Interleaving
+  CfgMemoryChannelInterleaving  BOOLEAN ?       ; < Memory Channel Interleaving
+  CfgMemoryPowerDown            BOOLEAN ?       ; < Memory Power Down
+  CfgPowerDownMode              POWER_DOWN_MODE ?       ; < Power Down Mode
+  CfgOnlineSpare                BOOLEAN ?       ; < Online Spare
+  CfgMemoryParityEnable         BOOLEAN ?       ; < Memory Parity Enable
+  CfgBankSwizzle                BOOLEAN ?       ; < Bank Swizzle
+  CfgTimingModeSelect           USER_MEMORY_TIMING_MODE ?       ; < Timing Mode Select
+  CfgMemoryClockSelect          MEMORY_BUS_SPEED ?      ; < Memory Clock Select
+  CfgDqsTrainingControl         BOOLEAN ?       ; < Dqs Training Control
+  CfgIgnoreSpdChecksum          BOOLEAN ?       ; < Ignore Spd Checksum
+  CfgUseBurstMode               BOOLEAN ?       ; < Use Burst Mode
+  CfgMemoryAllClocksOn          BOOLEAN ?       ; < Memory All Clocks On
+  CfgEnableEccFeature           BOOLEAN ?       ; < Enable ECC Feature
+  CfgEccRedirection             BOOLEAN ?       ; < ECC Redirection
+  CfgScrubDramRate              UINT16 ?        ; < Scrub Dram Rate
+  CfgScrubL2Rate                UINT16 ?        ; < Scrub L2Rate
+  CfgScrubL3Rate                UINT16 ?        ; < Scrub L3Rate
+  CfgScrubIcRate                UINT16 ?        ; < Scrub Ic Rate
+  CfgScrubDcRate                UINT16 ?        ; < Scrub Dc Rate
+  CfgEccSyncFlood               BOOLEAN ?       ; < ECC Sync Flood
+  CfgEccSymbolSize              UINT16 ?        ; < ECC Symbol Size
+  CfgHeapDramAddress            UINT64 ?        ; < Heap contents will be temporarily stored in this address during the transition
+  CfgNodeMem1GBAlign            BOOLEAN ?       ; < Node Mem 1GB boundary Alignment
+  CfgS3LateRestore              BOOLEAN ?       ; < S3 Late Restore
+  CfgAcpiPstateIndependent      BOOLEAN ?       ; < PSD method dependent/Independent
+  CfgApMtrrSettingsList         POINTER ?       ; < The AP's MTRR settings before final halt
+  CfgUmaMode                    UMA_MODE ?      ; < Uma Mode
+  CfgUmaSize                    UINT32 ?        ; < Uma Size [31:0]=Addr[47:16]
+  CfgUmaAbove4G                 BOOLEAN ?       ; < Uma Above 4G Support
+  CfgUmaAlignment               UMA_ALIGNMENT ? ; < Uma alignment
+  CfgProcessorScopeInSb         BOOLEAN ?       ; < ACPI Processor Object in \_SB scope
+  CfgProcessorScopeName0        CHAR8 ?         ; < OEM specific 1st character of processor scope name.
+  CfgProcessorScopeName1        CHAR8 ?         ; < OEM specific 2nd character of processor scope name.
+  CfgGnbHdAudio                 UINT8 ?         ; < Gnb HD Audio Enable
+  CfgAbmSupport                 UINT8 ?         ; < ABM support
+  CfgDynamicRefreshRate         UINT8 ?         ; < Dynamic refresh rate
+  CfgLcdBackLightControl        UINT16 ?        ; < Lcd back light control
+  CfgGnb3dStereoPinIndex        UINT8 ?         ; < 3D Stereo Pin ID
+  CfgTempPcieMmioBaseAddress    UINT32 ?        ; < Temp pcie MMIO base address
+  CfgGnbIGPUSSID                UINT32 ?        ; < Gnb internal GPU SSID
+  CfgGnbHDAudioSSID             UINT32 ?        ; < Gnb HD Audio SSID
+  CfgGnbPcieSSID                UINT32 ?        ; < Gnb PCIe SSID
+  CfgLvdsSpreadSpectrum         UINT16  ?       ; < Lvds Spread Spectrum. Build-time customizable only
+  CfgLvdsSpreadSpectrumRate     UINT16  ?       ; < Lvds Spread Spectrum Rate. Build-time customizable only
+  FchBldCfg                     POINTER ?       ; < FCH platform build configuration policy
+  CfgIommuSupport               BOOLEAN ?       ; IOMMU support
+  CfgLvdsPowerOnSeqDigonToDe    UINT8   ?       ; Panel initialization timing
+  CfgLvdsPowerOnSeqDeToVaryBl   UINT8   ?       ; Panel initialization timing
+  CfgLvdsPowerOnSeqDeToDigon    UINT8   ?       ; Panel initialization timing
+  CfgLvdsPowerOnSeqVaryBlToDe   UINT8   ?       ; Panel initialization timing
+  CfgLvdsPowerOnSeqOnToOffDelay UINT8   ?       ; Panel initialization timing
+  CfgLvdsPowerOnSeqVaryBlToBlon UINT8   ?       ; Panel initialization timing
+  CfgLvdsPowerOnSeqBlonToVaryBl UINT8   ?       ; Panel initialization timing
+  CfgLvdsMaxPixelClockFreq      UINT16  ?       ; The maximum pixel clock frequency supported
+  CfgLcdBitDepthControlValue    UINT32  ?       ; The LCD bit depth control settings
+  CfgLvds24bbpPanelMode         UINT8   ?       ; The LVDS 24 BBP mode
+  CfgLvdsMiscControl            LVDS_MISC_CONTROL   {}; THe LVDS Misc control
+  CfgPcieRefClkSpreadSpectrum   UINT16  ?       ; PCIe Reference Clock Spread Spectrum
+  CfgExternalVrefCtlFeature     BOOLEAN ?       ; External Vref control
+  CfgForceTrainMode             FORCE_TRAIN_MODE ?      ; < Force Train Mode
+  CfgGnbRemoteDisplaySupport    BOOLEAN ?       ; Wireless Display Support
+  CfgIvrsExclusionRangeList     POINTER ?       ; IOMMU Exclusion Range List
+  Reserved                      BOOLEAN ?       ; < reserved...
+BUILD_OPT_CFG    ENDS
+
+  ; A structure containing platform specific operational characteristics. This
+  ; structure is initially populated by the initializer with a copy of the same
+  ; structure that was created at build time using the build configuration controls.
+PLATFORM_CONFIGURATION    STRUCT
+  PlatformProfile               PERFORMANCE_PROFILE {}          ; < Several configuration settings for the processor.
+  PlatformDeemphasisList        POINTER ?       ; < Deemphasis levels for the platform's HT links.
+  CoreLevelingMode              UINT8 ?         ; < Indicates how to balance the number of cores per processor.
+  C1eMode                       PLATFORM_C1E_MODES ? ; < Specifies the method of C1e enablement - Disabled, HW, or message based.
+  C1ePlatformData               UINT32 ?        ; < If C1eMode is HW, specifies the P_LVL3 I/O port of the platform.
+  C1ePlatformData1              UINT32 ?        ; < If C1eMode is SW, specifies the address of chipset's SMI command port.
+  C1ePlatformData2              UINT32 ?        ; < If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source.
+  C1ePlatformData3              UINT32 ?        ; < If C1eMode is Auto, specifies the P_LVL3 I/O port of the platform for HW C1e
+  CStateMode                    PLATFORM_CSTATE_MODES ? ; < Specifies the method of C-State enablement - Disabled, or C6.
+  CStatePlatformData            UINT32 ?        ; < This element specifies some pertinent data needed for the operation of the Cstate feature
+                                                ; < If CStateMode is CStateModeC6, this item is reserved
+  CStateIoBaseAddress           UINT16 ?        ; < This item specifies a free block of 8 consecutive bytes of I/O ports that
+                                                ; < can be used to allow the CPU to enter Cstates.
+  CpbMode                       PLATFORM_CPB_MODES ? ; < Specifies the method of core performance boost enablement - Disabled, or Auto.
+  UserOptionDmi                 BOOLEAN ?       ; < When set to TRUE, the DMI data table is generated.
+  UserOptionPState              BOOLEAN ?       ; < When set to TRUE, the PState data tables are generated.
+  UserOptionSrat                BOOLEAN ?       ; < When set to TRUE, the SRAT data table is generated.
+  UserOptionSlit                BOOLEAN ?       ; < When set to TRUE, the SLIT data table is generated.
+  UserOptionWhea                BOOLEAN ?       ; < When set to TRUE, the WHEA data table is generated.
+  LowPowerPstateForProcHot      PLATFORM_LOW_POWER_PSTATE_MODES ? ; < Specifies the method of low power Pstate for PROCHOT enablement - Disabled, or Auto.
+  PowerCeiling                  UINT32 ?        ; < P-State Ceiling Enabling Deck - Max power milli-watts.
+  ForcePstateIndependent        BOOLEAN ?       ; < P-State _PSD independence or dependence.
+  PStatesInHpcMode              BOOLEAN ?       ; < High performance computing (HPC) mode
+  NumberOfIoApics               UINT32 ?        ; < Number of I/O APICs in the system
+  VrmProperties                 PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({})  ; < Several configuration settings for the voltage regulator modules.
+  ProcessorScopeInSb            BOOLEAN ?       ; < ACPI Processor Object in \_SB scope
+  ProcessorScopeName0           CHAR8 ?         ; < OEM specific 1st character of processor scope name.
+  ProcessorScopeName1           CHAR8 ?         ; < OEM specific 2nd character of processor scope name.
+  GnbHdAudio                    UINT8 ?         ; < Control GFX HD Audio controller(Used for HDMI and DP display output),
+                                                ; < essentially it enables function 1 of graphics device.
+                                                ; < @li 0 = HD Audio disable
+                                                ; < @li 1 = HD Audio enable
+  AbmSupport                    UINT8 ?         ; < Automatic adjust LVDS/eDP Back light level support.It is
+                                                ; < characteristic specific to display panel which used by platform design.
+                                                ; < @li 0 = ABM support disabled
+                                                ; < @li 1 = ABM support enabled
+  DynamicRefreshRate            UINT8 ?         ; < Adjust refresh rate on LVDS/eDP.
+  LcdBackLightControl           UINT16 ?        ; < The PWM frequency to LCD backlight control.
+                                                ; < If equal to 0 backlight not controlled by iGPU.
+PLATFORM_CONFIGURATION    ENDS
+
+
+; *********************************************************************
+; * Structures for: AmdInitLate
+; *********************************************************************
+    PROC_VERSION_LENGTH         EQU    48
+    MAX_DIMMS_PER_SOCKET        EQU    16
+
+
+  ; Interface Parameter Structures
+ ; DMI Type4 - Processor ID
+TYPE4_PROC_ID    STRUCT
+  ProcIdLsd                     UINT32 ?        ; < Lower half of 64b ID
+  ProcIdMsd                     UINT32 ?        ; < Upper half of 64b ID
+TYPE4_PROC_ID    ENDS
+
+ ; DMI Type 4 - Processor information
+TYPE4_DMI_INFO    STRUCT
+  T4ProcType                    UINT8 ?         ; < CPU Type
+  T4ProcFamily                  UINT8 ?         ; < Family 1
+  T4ProcId                      TYPE4_PROC_ID {}        ; < Id
+  T4Voltage                     UINT8 ?         ; < Voltage
+  T4ExternalClock               UINT16 ?        ; < External clock
+  T4MaxSpeed                    UINT16 ?        ; < Max speed
+  T4CurrentSpeed                UINT16 ?        ; < Current speed
+  T4Status                      UINT8 ?         ; < Status
+  T4ProcUpgrade                 UINT8 ?         ; < Up grade
+  T4CoreCount                   UINT8 ?         ; < Core count
+  T4CoreEnabled                 UINT8 ?         ; < Core Enable
+  T4ThreadCount                 UINT8 ?         ; < Thread count
+  T4ProcCharacteristics         UINT16 ?        ; < Characteristics
+  T4ProcFamily2                 UINT16 ?        ; < Family 2
+  T4ProcVersion                 CHAR8 (PROC_VERSION_LENGTH) DUP (?)     ; < Cpu version
+TYPE4_DMI_INFO    ENDS
+
+ ; DMI Type 7 - Cache information
+TYPE7_DMI_INFO    STRUCT
+  T7CacheCfg                    UINT16 ?        ; < Cache cfg
+  T7MaxCacheSize                UINT16 ?        ; < Max size
+  T7InstallSize                 UINT16 ?        ; < Install size
+  T7SupportedSramType           UINT16 ?        ; < Supported Sram Type
+  T7CurrentSramType             UINT16 ?        ; < Current type
+  T7CacheSpeed                  UINT8 ?         ; < Speed
+  T7ErrorCorrectionType         UINT8 ?         ; < ECC type
+  T7SystemCacheType             UINT8 ?         ; < Cache type
+  T7Associativity               UINT8 ?         ; < Associativity
+TYPE7_DMI_INFO    ENDS
+
+ ; DMI Type 16 offset 04h - Location
+
+  OtherLocation         EQU    01h      ; < Assign 01 to Other
+  UnknownLocation       EQU    2        ; < Assign 02 to Unknown
+  SystemboardOrMotherboard      EQU    3        ; < Assign 03 to systemboard or motherboard
+  IsaAddonCard          EQU    4        ; < Assign 04 to ISA add-on card
+  EisaAddonCard         EQU    5        ; < Assign 05 to EISA add-on card
+  PciAddonCard          EQU    6        ; < Assign 06 to PCI add-on card
+  McaAddonCard          EQU    7        ; < Assign 07 to MCA add-on card
+  PcmciaAddonCard       EQU    8        ; < Assign 08 to PCMCIA add-on card
+  ProprietaryAddonCard  EQU    9        ; < Assign 09 to proprietary add-on card
+  NuBus                 EQU    10       ; < Assign 0A to NuBus
+  Pc98C20AddonCard      EQU    11       ; < Assign 0A0 to PC-98/C20 add-on card
+  Pc98C24AddonCard      EQU    12       ; < Assign 0A1 to PC-98/C24 add-on card
+  Pc98EAddoncard        EQU    13       ; < Assign 0A2 to PC-98/E add-on card
+  Pc98LocalBusAddonCard EQU    14       ; < Assign 0A3 to PC-98/Local bus add-on card
+DMI_T16_LOCATION  TEXTEQU  <DWORD> ;} DMI_T16_LOCATION;
+
+ ; DMI Type 16 offset 05h - Memory Error Correction
+
+  OtherUse              EQU    01h      ; < Assign 01 to Other
+  UnknownUse            EQU    2        ; < Assign 02 to Unknown
+  SystemMemory          EQU    3        ; < Assign 03 to system memory
+  VideoMemory           EQU    4        ; < Assign 04 to video memory
+  FlashMemory           EQU    5        ; < Assign 05 to flash memory
+  NonvolatileRam        EQU    6        ; < Assign 06 to non-volatile RAM
+  CacheMemory           EQU    7        ; < Assign 07 to cache memory
+DMI_T16_USE  TEXTEQU  <DWORD> ;} DMI_T16_USE;
+
+ ; DMI Type 16 offset 07h - Maximum Capacity
+
+  Dmi16OtherErrCorrection    EQU    01h ; < Assign 01 to Other
+  Dmi16UnknownErrCorrection  EQU    2   ; < Assign 02 to Unknown
+  Dmi16NoneErrCorrection     EQU    3   ; < Assign 03 to None
+  Dmi16Parity                EQU    4   ; < Assign 04 to parity
+  Dmi16SingleBitEcc          EQU    5   ; < Assign 05 to Single-bit ECC
+  Dmi16MultiBitEcc           EQU    6   ; < Assign 06 to Multi-bit ECC
+  Dmi16Crc                   EQU    7   ; < Assign 07 to CRC
+DMI_T16_ERROR_CORRECTION  TEXTEQU  <DWORD> ;} DMI_T16_ERROR_CORRECTION;
+
+ ; DMI Type 16 - Physical Memory Array
+TYPE16_DMI_INFO    STRUCT
+  Location                      DMI_T16_LOCATION ?      ; < The physical location of the Memory Array,
+                                                        ; < whether on the system board or an add-in board.
+  Use                           DMI_T16_USE ?           ; < Identifies the function for which the array
+                                                        ; < is used.
+  MemoryErrorCorrection         DMI_T16_ERROR_CORRECTION ?      ; < The primary hardware error correction or
+                                                        ; < detection method supported by this memory array.
+  MaximumCapacity               UINT32 ?        ; < The maximum memory capacity, in kilobytes,
+                                                        ; < for the array.
+  NumberOfMemoryDevices         UINT16 ?        ; < The number of slots or sockets available
+                                                        ; < for memory devices in this array.
+  ExtMaxCapacity                UINT64 ?                ; < The maximum memory capacity, in bytes,
+                                                        ; < for this array.
+TYPE16_DMI_INFO    ENDS
+
+ ; DMI Type 17 offset 0Eh - Form Factor
+  OtherFormFactor       EQU    01h      ; < Assign 01 to Other
+  UnknowFormFactor      EQU    2        ; < Assign 02 to Unknown
+  SimmFormFactor        EQU    3        ; < Assign 03 to SIMM
+  SipFormFactor         EQU    4        ; < Assign 04 to SIP
+  ChipFormFactor        EQU    5        ; < Assign 05 to Chip
+  DipFormFactor         EQU    6        ; < Assign 06 to DIP
+  ZipFormFactor         EQU    7        ; < Assign 07 to ZIP
+  ProprietaryCardFormFactor     EQU    8        ; < Assign 08 to Proprietary Card
+  DimmFormFactorFormFactor      EQU    9        ; < Assign 09 to DIMM
+  TsopFormFactor        EQU    10       ; < Assign 10 to TSOP
+  RowOfChipsFormFactor  EQU    11       ; < Assign 11 to Row of chips
+  RimmFormFactor        EQU    12       ; < Assign 12 to RIMM
+  SodimmFormFactor      EQU    13       ; < Assign 13 to SODIMM
+  SrimmFormFactor       EQU    14       ; < Assign 14 to SRIMM
+  FbDimmFormFactor      EQU    15       ; < Assign 15 to FB-DIMM
+DMI_T17_FORM_FACTOR  TEXTEQU  <DWORD>
+
+ ; DMI Type 17 offset 12h - Memory Type
+  OtherMemType          EQU    01h      ; < Assign 01 to Other
+  UnknownMemType        EQU    2        ; < Assign 02 to Unknown
+  DramMemType           EQU    3        ; < Assign 03 to DRAM
+  EdramMemType          EQU    4        ; < Assign 04 to EDRAM
+  VramMemType           EQU    5        ; < Assign 05 to VRAM
+  SramMemType           EQU    6        ; < Assign 06 to SRAM
+  RamMemType            EQU    7        ; < Assign 07 to RAM
+  RomMemType            EQU    8        ; < Assign 08 to ROM
+  FlashMemType          EQU    9        ; < Assign 09 to Flash
+  EepromMemType         EQU    10       ; < Assign 10 to EEPROM
+  FepromMemType         EQU    11       ; < Assign 11 to FEPROM
+  EpromMemType          EQU    12       ; < Assign 12 to EPROM
+  CdramMemType          EQU    13       ; < Assign 13 to CDRAM
+  ThreeDramMemType      EQU    14       ; < Assign 14 to 3DRAM
+  SdramMemType          EQU    15       ; < Assign 15 to SDRAM
+  SgramMemType          EQU    16       ; < Assign 16 to SGRAM
+  RdramMemType          EQU    17       ; < Assign 17 to RDRAM
+  DdrMemType            EQU    18       ; < Assign 18 to DDR
+  Ddr2MemType           EQU    19       ; < Assign 19 to DDR2
+  Ddr2FbdimmMemType     EQU    20       ; < Assign 20 to DDR2 FB-DIMM
+  Ddr3MemType           EQU    24       ; < Assign 24 to DDR3
+  Fbd2MemType           EQU    25       ; < Assign 25 to FBD2
+DMI_T17_MEMORY_TYPE  TEXTEQU  <DWORD>
+
+ ; DMI Type 17 offset 13h - Type Detail
+DMI_T17_TYPE_DETAIL    STRUCT
+  Reserved1                     UINT16 ?
+;   OUT UINT16                    Reserved1:1;                  ; < Reserved
+;   OUT UINT16                    Other:1;                      ; < Other
+;   OUT UINT16                    Unknown:1;                    ; < Unknown
+;   OUT UINT16                    FastPaged:1;                  ; < Fast-Paged
+;   OUT UINT16                    StaticColumn:1;               ; < Static column
+;   OUT UINT16                    PseudoStatic:1;               ; < Pseudo-static
+;   OUT UINT16                    Rambus:1;                     ; < RAMBUS
+;   OUT UINT16                    Synchronous:1;                ; < Synchronous
+;   OUT UINT16                    Cmos:1;                       ; < CMOS
+;   OUT UINT16                    Edo:1;                        ; < EDO
+;   OUT UINT16                    WindowDram:1;                 ; < Window DRAM
+;   OUT UINT16                    CacheDram:1;                  ; < Cache Dram
+;   OUT UINT16                    NonVolatile:1;                ; < Non-volatile
+;   OUT UINT16                    Reserved2:3;                  ; < Reserved
+DMI_T17_TYPE_DETAIL    ENDS
+
+ ; DMI Type 17 - Memory Device
+TYPE17_DMI_INFO    STRUCT
+  TotalWidth                    UINT16 ?        ; < Total Width, in bits, of this memory device, including any check or error-correction bits.
+  DataWidth                     UINT16 ?        ; < Data Width, in bits, of this memory device.
+  MemorySize                    UINT16 ?        ; < The size of the memory device.
+  FormFactor                    DMI_T17_FORM_FACTOR ?           ; < The implementation form factor for this memory device.
+  DeviceSet                     UINT8 ?         ; < Identifies when the Memory Device is one of a set of
+                                                        ; < Memory Devices that must be populated with all devices of
+                                                        ; < the same type and size, and the set to which this device belongs.
+  DeviceLocator                 CHAR8 (8) DUP (?)       ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located.
+  BankLocator                   CHAR8 (10) DUP (?)      ; < The string number of the string that identifies the physically labeled bank where the memory device is located.
+  MemoryType                    DMI_T17_MEMORY_TYPE ?           ; < The type of memory used in this device.
+  TypeDetail                    DMI_T17_TYPE_DETAIL {}          ; < Additional detail on the memory device type
+  Speed                         UINT16 ?                ; < Identifies the speed of the device, in megahertz (MHz).
+  ManufacturerIdCode            UINT64 ?                ; < Manufacturer ID code.
+  SerialNumber                  CHAR8 (9) DUP (?)       ; < Serial Number.
+  PartNumber                    CHAR8 (19) DUP (?)      ; < Part Number.
+  Attributes                    UINT8 ?                 ; < Bits 7-4: Reserved, Bits 3-0: rank.
+  ExtSize                       UINT32 ?                ; < Extended Size.
+  ConfigSpeed                   UINT16 ?        ; < Configured memory clock speed
+TYPE17_DMI_INFO    ENDS
+
+ ; Memory DMI Type 17 and 20 - for memory use
+MEM_DMI_INFO    STRUCT
+  TotalWidth                    UINT16 ?              ; < Total Width, in bits, of this memory device, including any check or error-correction bits.
+  DataWidth                     UINT16 ?              ; < Data Width, in bits, of this memory device.
+  MemorySize                    UINT16 ?              ; < The size of the memory device.
+  FormFactor                    DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device.
+  DeviceLocator                 UINT8 ?               ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located.
+  BankLocator                   UINT8 ?               ; < The string number of the string that identifies the physically labeled bank where the memory device is located.
+  Speed                         UINT16 ?              ; < Identifies the speed of the device, in megahertz (MHz).
+  ManufacturerIdCode            UINT64 ?              ; < Manufacturer ID code.
+  SerialNumber                  UINT8 (4) DUP (?)     ; < Serial Number.
+  PartNumber                    UINT8 (18) DUP (?)    ; < Part Number.
+  Attributes                    UINT8 ?               ; < Bits 7-4: Reserved, Bits 3-0: rank.
+  ExtSize                       UINT32 ?              ; < Extended Size.
+  Socket                        UINT8 ?
+; OUT UINT8                     Socket:3              ; < Socket ID
+; OUT UINT8                     Channel:2             ; < Channel ID
+; OUT UINT8                     Dimm:2                ; < DIMM ID
+; OUT UINT8                     DimmPresent:1         ; < Dimm Present
+  StartingAddr                  UINT32 ?              ; < The physical address, in kilobytes, of a range
+                                                      ; < of memory mapped to the referenced Memory Device.
+  EndingAddr                    UINT32 ?              ; < The handle, or instance number, associated with
+                                                      ; < the Memory Device structure to which this address
+                                                      ; < range is mapped.
+  ConfigSpeed                   UINT16 ?              ; < Configured memory clock speed
+  ExtStartingAddr               UINT64 ?              ; < The physical address, in bytes, of a range of
+                                                      ; < memory mapped to the referenced Memory Device.
+  ExtEndingAddr                 UINT64 ?              ; < The physical ending address, in bytes, of the last of
+                                                      ; < a range of addresses mapped to the referenced Memory Device.
+MEM_DMI_INFO    ENDS
+
+ ; DMI Type 19 - Memory Array Mapped Address
+TYPE19_DMI_INFO    STRUCT
+  StartingAddr                  UINT32 ?        ; < The physical address, in kilobytes,
+                                                        ; < of a range of memory mapped to the
+                                                        ; < specified physical memory array.
+  EndingAddr                    UINT32 ?        ; < The physical ending address of the
+                                                        ; < last kilobyte of a range of addresses
+                                                        ; < mapped to the specified physical memory array.
+  MemoryArrayHandle             UINT16 ?        ; < The handle, or instance number, associated
+                                                        ; < with the physical memory array to which this
+                                                        ; < address range is mapped.
+  PartitionWidth                UINT8 ?         ; < Identifies the number of memory devices that
+                                                        ; < form a single row of memory for the address
+                                                        ; < partition defined by this structure.
+  ExtStartingAddr               UINT64 ?              ; < The physical address, in bytes, of a range of
+                                                      ; < memory mapped to the specified Physical Memory Array.
+  ExtEndingAddr                 UINT64 ?              ; < The physical address, in bytes, of a range of
+                                                      ; < memory mapped to the specified Physical Memory Array.
+TYPE19_DMI_INFO    ENDS
+
+; DMI Type 20 - Memory Device Mapped Address
+TYPE20_DMI_INFO    STRUCT
+  StartingAddr                  UINT32 ?        ; < The physical address, in kilobytes, of a range
+                                                        ; < of memory mapped to the referenced Memory Device.
+  EndingAddr                    UINT32 ?        ; < The handle, or instance number, associated with
+                                                        ; < the Memory Device structure to which this address
+                                                        ; < range is mapped.
+  MemoryDeviceHandle            UINT16 ?        ; < The handle, or instance number, associated with
+                                                        ; < the Memory Device structure to which this address
+                                                        ; < range is mapped.
+  MemoryArrayMappedAddressHandle        UINT16 ?        ; < The handle, or instance number, associated
+                                                        ; < with the Memory Array Mapped Address structure to
+                                                        ; < which this device address range is mapped.
+  PartitionRowPosition          UINT8 ?         ; < Identifies the position of the referenced Memory
+                                                        ; < Device in a row of the address partition.
+  InterleavePosition            UINT8 ?         ; < The position of the referenced Memory Device in
+                                                        ; < an interleave.
+  InterleavedDataDepth          UINT8 ?         ; < The maximum number of consecutive rows from the
+                                                        ; < referenced Memory Device that are accessed in a
+                                                        ; < single interleaved transfer.
+  ExtStartingAddr               UINT64 ?              ; < The physical address, in bytes, of a range of
+                                                      ; < memory mapped to the referenced Memory Device.
+  ExtEndingAddr                 UINT64 ?              ; < The physical ending address, in bytes, of the last of
+                                                      ; < a range of addresses mapped to the referenced Memory Device.
+TYPE20_DMI_INFO    ENDS
+
+ ; Collection of pointers to the DMI records
+DMI_INFO    STRUCT
+  T4                            TYPE4_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({})         ; < Type 4 struc
+  T7L1                          TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({})         ; < Type 7 struc 1
+  T7L2                          TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({})         ; < Type 7 struc 2
+  T7L3                          TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({})         ; < Type 7 struc 3
+  T16                           TYPE16_DMI_INFO {}      ; < Type 16 struc
+  T17                           TYPE17_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({})          ; < Type 17 struc
+  T19                           TYPE19_DMI_INFO {}      ; < Type 19 struc
+  T20                           TYPE20_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({})          ; < Type 20 struc
+DMI_INFO    ENDS
+
+
+
+; *********************************************************************
+; * Interface call:  AllocateExecutionCache
+; *********************************************************************
+    MAX_CACHE_REGIONS           EQU    3
+
+ ; AllocateExecutionCache sub param structure for cached memory region
+EXECUTION_CACHE_REGION    STRUCT
+  ExeCacheStartAddr             UINT32 ?        ; < Start address
+  ExeCacheSize                  UINT32 ?        ; < Size
+EXECUTION_CACHE_REGION    ENDS
+
+; *********************************************************************
+; * Interface call:  AmdGetAvailableExeCacheSize
+; *********************************************************************
+ ; Get available Cache remain
+AMD_GET_EXE_SIZE_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Standard header
+     AvailableExeCacheSize      UINT32 ?        ; < Remain size
+AMD_GET_EXE_SIZE_PARAMS    ENDS
+
+
+
+
+
+
+ ; Selection type for core leveling
+  CORE_LEVEL_LOWEST     EQU    0        ; < Level to lowest common denominator
+  CORE_LEVEL_TWO        EQU    1        ; < Level to 2 cores
+  CORE_LEVEL_POWER_OF_TWO       EQU    2        ; < Level to 1,2,4 or 8
+  CORE_LEVEL_NONE       EQU    3        ; < Do no leveling
+  CORE_LEVEL_COMPUTE_UNIT EQU  4        ; < Level cores to one core per compute unit
+  CORE_LEVEL_ONE        EQU    5        ; < Level to 1 core
+  CORE_LEVEL_THREE      EQU    6        ; < Level to 3 cores
+  CORE_LEVEL_FOUR       EQU    7        ; < Level to 4 cores
+  CORE_LEVEL_FIVE       EQU    8        ; < Level to 5 cores
+  CORE_LEVEL_SIX        EQU    9        ; < Level to 6 cores
+  CORE_LEVEL_SEVEN      EQU    10       ; < Level to 7 cores
+  CORE_LEVEL_EIGHT      EQU    11       ; < Level to 8 cores
+  CORE_LEVEL_NINE       EQU    12       ; < Level to 9 cores
+  CORE_LEVEL_TEN        EQU    13       ; < Level to 10 cores
+  CORE_LEVEL_ELEVEN     EQU    14       ; < Level to 11 cores
+  CORE_LEVEL_TWELVE     EQU    15       ; < Level to 12 cores
+  CORE_LEVEL_THIRTEEN   EQU    16       ; < Level to 13 cores
+  CORE_LEVEL_FOURTEEN   EQU    17       ; < Level to 14 cores
+  CORE_LEVEL_FIFTEEN    EQU    18       ; < Level to 15 cores
+  CoreLevelModeMax      EQU    19       ; < Used for bounds checking
+CORE_LEVELING_TYPE  TEXTEQU  <DWORD>
+
+
+; ***********************************************************************
+; *
+; *  AGESA Basic Level interface structure definition and function prototypes
+; *
+; **********************************************************************
+
+; *********************************************************************
+; * Interface call:  AmdCreateStruct
+; *********************************************************************
+
+; *********************************************************************
+; * Interface call:  AmdReleaseStruct
+; *********************************************************************
+
+; *********************************************************************
+; * Interface call:  AmdInitReset
+; *********************************************************************
+ ; AmdInitReset param structure
+AMD_RESET_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Standard header
+  CacheRegion                   EXECUTION_CACHE_REGION (3) DUP ({})     ; < The cached memory region
+  HtConfig                      AMD_HT_RESET_INTERFACE {}       ; < The interface for Ht Recovery
+  FchInterface                  FCH_RESET_INTERFACE {}          ; Interface for FCH configuration
+AMD_RESET_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface call:  AmdInitEarly
+; *********************************************************************
+ ; InitEarly param structure
+
+ ; Provide defaults or customizations to each service performed in AmdInitEarly.
+
+AMD_EARLY_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < The standard header
+  CacheRegion                   EXECUTION_CACHE_REGION (3) DUP ({})     ; < Execution Map Interface
+  PlatformConfig                PLATFORM_CONFIGURATION {}       ; < platform operational characteristics.
+  HtConfig                      AMD_HT_INTERFACE {}     ; < HyperTransport Interface
+  GnbConfig                     GNB_CONFIGURATION {}    ; < GNB configuration
+AMD_EARLY_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface call:  AmdInitPost
+; *********************************************************************
+ ; AmdInitPost param structure
+AMD_POST_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Standard header
+  PlatformConfig                PLATFORM_CONFIGURATION {}       ; < platform operational characteristics.
+  MemConfig                     MEM_PARAMETER_STRUCT {}         ; < Memory post param
+AMD_POST_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface call:  AmdInitEnv
+; *********************************************************************
+ ; AmdInitEnv param structure
+AMD_ENV_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Standard header
+  PlatformConfig                PLATFORM_CONFIGURATION {}       ; < platform operational characteristics.
+  GnbEnvConfiguration           GNB_ENV_CONFIGURATION {}        ; < platform operational characteristics.
+  FchInterface                  FCH_INTERFACE {}                ; FCH configuration
+AMD_ENV_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface call:  AmdInitMid
+; *********************************************************************
+ ; AmdInitMid param structure
+AMD_MID_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Standard header
+  PlatformConfig                PLATFORM_CONFIGURATION {}       ; < platform operational characteristics.
+  FchInterface                  FCH_INTERFACE {}                ; FCH configuration
+AMD_MID_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface call:  AmdInitLate
+; *********************************************************************
+ ; AmdInitLate param structure
+AMD_LATE_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}    ; < Standard header
+  PlatformConfig                PLATFORM_CONFIGURATION {} ; < platform operational characteristics.
+     IvrsExclusionRangeList     POINTER ?       ; < IVMD exclusion range descriptor
+     DmiTable                   POINTER ?       ; < DMI Interface
+     AcpiPState                 POINTER ?       ; < Acpi Pstate SSDT Table
+     AcpiSrat                   POINTER ?       ; < SRAT Table
+     AcpiSlit                   POINTER ?       ; < SLIT Table
+     AcpiWheaMce                POINTER ?       ; < WHEA MCE Table
+     AcpiWheaCmc                POINTER ?       ; < WHEA CMC Table
+     AcpiAlib                   POINTER ?       ; < ALIB Table
+     AcpiIvrs                   POINTER ?       ; < IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table
+AMD_LATE_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface call:  AmdInitRecovery
+; *********************************************************************
+ ; CPU Recovery Parameters
+AMD_CPU_RECOVERY_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Standard Header
+  PlatformConfig                PLATFORM_CONFIGURATION {} ; < platform operational characteristics
+AMD_CPU_RECOVERY_PARAMS    ENDS
+
+ ; AmdInitRecovery param structure
+AMD_RECOVERY_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Standard header
+  MemConfig                     MEM_PARAMETER_STRUCT {}         ; < Memory post param
+  CacheRegion                   EXECUTION_CACHE_REGION (3) DUP ({})     ; < The cached memory region. And the max cache region is 3
+  CpuRecoveryParams             AMD_CPU_RECOVERY_PARAMS {}      ; < Params for CPU related recovery init.
+AMD_RECOVERY_PARAMS    ENDS
+
+
+; *********************************************************************
+; * Interface call:  AmdInitResume
+; *********************************************************************
+ ; AmdInitResume param structure
+AMD_RESUME_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}      ; < Standard header
+  PlatformConfig                PLATFORM_CONFIGURATION {} ; < Platform operational characteristics
+  S3DataBlock                   AMD_S3_PARAMS {}          ; < Save state data
+AMD_RESUME_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface call:  AmdS3LateRestore
+; *********************************************************************
+ ; AmdS3LateRestore param structure
+AMD_S3LATE_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Standard header
+  PlatformConfig                PLATFORM_CONFIGURATION {}       ; < platform operational characteristics.
+  S3DataBlock                   AMD_S3_PARAMS {}        ; < Save state data
+AMD_S3LATE_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface call:  AmdS3Save
+; *********************************************************************
+ ; AmdS3Save param structure
+AMD_S3SAVE_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Standard header
+  PlatformConfig                PLATFORM_CONFIGURATION {}       ; < platform operational characteristics.
+  S3DataBlock                   AMD_S3_PARAMS {}        ; < Standard header
+  FchInterface                  FCH_INTERFACE {}        ; FCH configuration
+AMD_S3SAVE_PARAMS    ENDS
+
+ ; General Services API
+
+
+; *********************************************************************
+; * Interface service call:  AmdGetApicId
+; *********************************************************************
+ ; Request the APIC ID of a particular core.
+
+AMD_APIC_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Header for library and services.
+  Socket                        UINT8 ?         ; < The Core's Socket.
+  Core                          UINT8 ?         ; < The Core id.
+     IsPresent                  BOOLEAN ?       ; < The Core is present, and  ApicAddress is valid.
+     ApicAddress                UINT8 ?         ; < The Core's APIC ID.
+AMD_APIC_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface service call:  AmdGetPciAddress
+; *********************************************************************
+ ; Request the PCI Address of a Processor Module (that is, its Northbridge)
+
+AMD_GET_PCI_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Header for library and services.
+  Socket                        UINT8 ?         ; < The Processor's socket
+  Module                        UINT8 ?         ; < The Module in that Processor
+     IsPresent                  BOOLEAN ?       ; < The Core is present, and  PciAddress is valid.
+     PciAddress                 PCI_ADDR {}      ; < The Processor's PCI Config Space address (Function 0, Register 0)
+AMD_GET_PCI_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface service call:  AmdIdentifyCore
+; *********************************************************************
+ ; Request the identity (Socket, Module, Core) of the current Processor Core
+
+AMD_IDENTIFY_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Header for library and services.
+     Socket                     UINT8 ?         ; < The current Core's Socket
+     Module                     UINT8 ?         ; < The current Core's Processor Module
+     Core                       UINT8 ?         ; < The current Core's core id.
+AMD_IDENTIFY_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface service call:  AmdReadEventLog
+; *********************************************************************
+ ; An Event Log Entry.
+EVENT_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Header for library and services.
+     EventClass                 UINT32 ?        ; < The severity of this event, matches AGESA_STATUS.
+     EventInfo                  UINT32 ?        ; < The unique event identifier, zero means "no event".
+     DataParam1                 UINT32 ?        ; < Data specific to the Event.
+     DataParam2                 UINT32 ?        ; < Data specific to the Event.
+     DataParam3                 UINT32 ?        ; < Data specific to the Event.
+     DataParam4                 UINT32 ?        ; < Data specific to the Event.
+EVENT_PARAMS    ENDS
+
+; *********************************************************************
+; * Interface service call:  AmdIdentifyDimm
+; *********************************************************************
+ ; Request the identity of dimm from system address
+
+AMD_IDENTIFY_DIMM    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < Header for library and services.
+  MemoryAddress                 UINT64 ?        ; < System Address that needs to be translated to dimm identification.
+  SocketId                      UINT8 ?         ; < The socket on which the targeted address locates.
+  MemChannelId                  UINT8 ?         ; < The channel on which the targeted address locates.
+  DimmId                        UINT8 ?         ; < The dimm on which the targeted address locates.
+AMD_IDENTIFY_DIMM    ENDS
+
+ ; Data structure for the Mapping Item between Unified ID for IDS Setup Option
+ ; and the option value.
+
+IDS_NV_ITEM    STRUCT
+  IdsNvId                       UINT16 ?        ; < Unified ID for IDS Setup Option.
+  IdsNvValue                    UINT16 ?        ; < The value of IDS Setup Option.
+IDS_NV_ITEM    ENDS
+
+ ; Data Structure for IDS CallOut Function
+IDS_CALLOUT_STRUCT    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}     ; < The Standard Header for AGESA Service
+  IdsNvPtr                      POINTER ?       ; < Memory Pointer of IDS NV Table
+  Reserved                      UINT32 ?         ; < reserved
+IDS_CALLOUT_STRUCT    ENDS
+
+  AGESA_IDS_DFT_VAL                            EQU    0FFFFh; <  Default value of every uninitlized NV item, the action for it will be ignored
+  AGESA_IDS_NV_END                             EQU    0FFFFh; <  Flag specify end of option structure
+; WARNING: Don't change the comment below, it used as signature for script
+; AGESA IDS NV ID Definitions
+  AGESA_IDS_EXT_ID_START                            EQU    0000h; <                                                            specify the start of external NV id
+
+  AGESA_IDS_NV_UCODE                                EQU    0001h; <                                                           Enable or disable microcode patching
+
+  AGESA_IDS_NV_TARGET_PSTATE                        EQU    0002h; <                                                       Set the P-state required to be activated
+  AGESA_IDS_NV_POSTPSTATE                           EQU    0003h; <                                          Set the P-state required to be activated through POST
+
+  AGESA_IDS_NV_BANK_INTERLEAVE                      EQU    0004h; <                                                              Enable or disable Bank Interleave
+  AGESA_IDS_NV_CHANNEL_INTERLEAVE                   EQU    0005h; <                                                           Enable or disable Channel Interleave
+  AGESA_IDS_NV_NODE_INTERLEAVE                      EQU    0006h; <                                                              Enable or disable Node Interleave
+  AGESA_IDS_NV_MEMHOLE                              EQU    0007h; <                                                                 Enables or disable memory hole
+
+  AGESA_IDS_NV_SCRUB_REDIRECTION                    EQU    0008h; <                                          Enable or disable a write to dram with corrected data
+  AGESA_IDS_NV_DRAM_SCRUB                           EQU    0009h; <                                                  Set the rate of background scrubbing for DRAM
+  AGESA_IDS_NV_DCACHE_SCRUB                         EQU    000Ah; <                                           Set the rate of background scrubbing for the DCache.
+  AGESA_IDS_NV_L2_SCRUB                             EQU    000Bh; <                                          Set the rate of background scrubbing for the L2 cache
+  AGESA_IDS_NV_L3_SCRUB                             EQU    000Ch; <                                          Set the rate of background scrubbing for the L3 cache
+  AGESA_IDS_NV_ICACHE_SCRUB                         EQU    000Dh; <                                            Set the rate of background scrubbing for the Icache
+  AGESA_IDS_NV_SYNC_ON_ECC_ERROR                    EQU    000Eh; <                                   Enable or disable the sync flood on un-correctable ECC error
+  AGESA_IDS_NV_ECC_SYMBOL_SIZE                      EQU    000Fh; <                                                                            Set ECC symbol size
+
+  AGESA_IDS_NV_ALL_MEMCLKS                          EQU    0010h; <                                                     Enable or disable all memory clocks enable
+  AGESA_IDS_NV_DCT_GANGING_MODE                     EQU    0011h; <                                                                            Set the Ganged mode
+  AGESA_IDS_NV_DRAM_BURST_LENGTH32                  EQU    0012h; <                                                                   Set the DRAM Burst Length 32
+  AGESA_IDS_NV_MEMORY_POWER_DOWN                    EQU    0013h; <                                                       Enable or disable Memory power down mode
+  AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE               EQU    0014h; <                                                                 Set the Memory power down mode
+  AGESA_IDS_NV_DLL_SHUT_DOWN                        EQU    0015h; <                                                                  Enable or disable DLLShutdown
+  AGESA_IDS_NV_ONLINE_SPARE                         EQU    0016h; <     Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap
+
+  AGESA_IDS_NV_HT_ASSIST                            EQU    0017h; <                                                                    Enable or Disable HT Assist
+  AGESA_IDS_NV_ATMMODE                              EQU    0018h; <                                                                     Enable or Disable ATM mode
+
+  AGESA_IDS_NV_HDTOUT                               EQU    0019h; <                                                               Enable or disable HDTOUT feature
+
+  AGESA_IDS_NV_HTLINKSOCKET                         EQU    001Ah; <                                                                                 HT Link Socket
+  AGESA_IDS_NV_HTLINKPORT                           EQU    001Bh; <                                                                                   HT Link Port
+  AGESA_IDS_NV_HTLINKFREQ                           EQU    001Ch; <                                                                              HT Link Frequency
+  AGESA_IDS_NV_HTLINKWIDTHIN                        EQU    001Dh; <                                                                               HT Link In Width
+  AGESA_IDS_NV_HTLINKWIDTHOUT                       EQU    001Eh; <                                                                              HT Link Out Width
+
+  AGESA_IDS_NV_GNBHDAUDIOEN                         EQU    001Fh; <                                                                 Enable or disable GNB HD Audio
+
+  AGESA_IDS_NV_CPB_EN                               EQU    0020h; <                                                                         Core Performance Boost
+
+  AGESA_IDS_NV_HTC_EN                               EQU    0021h; <                                                                                     HTC Enable
+  AGESA_IDS_NV_HTC_OVERRIDE                         EQU    0022h; <                                                                                   HTC Override
+  AGESA_IDS_NV_HTC_PSTATE_LIMIT                     EQU    0023h; <                                                                       HTC P-state limit select
+  AGESA_IDS_NV_HTC_TEMP_HYS                         EQU    0024h; <                                                                     HTC Temperature Hysteresis
+  AGESA_IDS_NV_HTC_ACT_TEMP                         EQU    0025h; <                                                                            HTC Activation Temp
+
+  AGESA_IDS_NV_POWER_POLICY                         EQU    0026h; <                                                                   Select Platform Power Policy
+  AGESA_IDS_EXT_ID_END                              EQU    0027h; <                                                              specify the end of external NV ID
+
+  IDS_EX_NV_ID  TEXTEQU  <DWORD>
diff --git a/src/vendorcode/amd/agesa/f15/Legacy/amd.inc b/src/vendorcode/amd/agesa/f15/Legacy/amd.inc
new file mode 100644
index 0000000000..86e3a02a82
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Legacy/amd.inc
@@ -0,0 +1,462 @@
+; ****************************************************************************
+; *
+; * @file
+; *
+; * Agesa structures and definitions
+; *
+; * Contains AMD AGESA core interface
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  Include
+; * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+;
+; ****************************************************************************
+; *
+; * Copyright (C) 2012 Advanced Micro Devices, Inc.
+; * All rights reserved.
+; *
+; * Redistribution and use in source and binary forms, with or without
+; * modification, are permitted provided that the following conditions are met:
+; *     * Redistributions of source code must retain the above copyright
+; *       notice, this list of conditions and the following disclaimer.
+; *     * Redistributions in binary form must reproduce the above copyright
+; *       notice, this list of conditions and the following disclaimer in the
+; *       documentation and/or other materials provided with the distribution.
+; *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+; *       its contributors may be used to endorse or promote products derived
+; *       from this software without specific prior written permission.
+; *
+; * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; *
+; *
+; **************************************************************************
+
+
+UINT64    TEXTEQU     <QWORD>
+UINT32    TEXTEQU     <DWORD>
+UINT16    TEXTEQU     <WORD>
+UINT8     TEXTEQU     <BYTE>
+CHAR8     TEXTEQU     <BYTE>
+BOOLEAN   TEXTEQU     <BYTE>
+POINTER   TEXTEQU     <DWORD>
+
+ ; AGESA Types and Definitions
+
+    AGESA_REVISION              EQU    "Arch2008"
+    AGESA_ID                    EQU    "AGESA"
+
+    LAST_ENTRY                  EQU    0FFFFFFFFh
+    IMAGE_SIGNATURE             EQU    'DMA$'
+    IOCF8                       EQU    0CF8h
+    IOCFC                       EQU    0CFCh
+
+ ; The return status for all AGESA public services.
+
+ ; Services return the most severe status of any logged event.  Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK
+ ; will have log entries with more detail.
+
+  AGESA_SUCCESS               EQU    0        ; < The service completed normally. Info may be logged.
+  AGESA_UNSUPPORTED           EQU    1        ; < The dispatcher or create struct had an unimplemented function requested.
+                                              ; <  Not logged.
+  AGESA_BOUNDS_CHK            EQU    2        ; < A dynamic parameter was out of range and the service was not provided.
+                                              ; < Example, memory address not installed, heap buffer handle not found.
+                                              ; < Not Logged.
+ ; AGESA_STATUS of greater severity (the ones below this line), always have a log entry available.
+  AGESA_ALERT                 EQU    3        ; < An observed condition, but no loss of function.
+                                              ; <  See log.  Example, HT CRC.
+  AGESA_WARNING               EQU    4        ; < Possible or minor loss of function.  See Log.
+  AGESA_ERROR                 EQU    5        ; < Significant loss of function, boot may be possible.  See Log.
+  AGESA_CRITICAL              EQU    6        ; < Continue boot only to notify user.  See Log.
+  AGESA_FATAL                 EQU    7        ; < Halt booting.  See Log.
+  AgesaStatusMax              EQU    8        ; < Not a status, use for limit checking.
+AGESA_STATUS        TEXTEQU    <DWORD>
+
+; For checking whether a status is at or above the mandatory log level.
+AGESA_STATUS_LOG_LEVEL         EQU   AGESA_ALERT
+
+    CALLOUT_ENTRY       TEXTEQU    <POINTER>
+    IMAGE_ENTRY         TEXTEQU    <POINTER>
+    MODULE_ENTRY        TEXTEQU    <POINTER>
+
+; This allocation type is used by the AmdCreateStruct entry point
+  PreMemHeap            EQU    0        ; < Create heap in cache.
+  PostMemDram           EQU    1        ; < Create heap in memory.
+  ByHost                EQU    2        ; < Create heap by Host.
+ALLOCATION_METHOD  TEXTEQU  <DWORD>
+
+ ; These width descriptors are used by the library function, and others, to specify the data size
+  AccessWidth8          EQU    1        ; < Access width is 8 bits.
+  AccessWidth16         EQU    2        ; < Access width is 16 bits.
+  AccessWidth32         EQU    3        ; < Access width is 32 bits.
+  AccessWidth64         EQU    4        ; < Access width is 64 bits.
+
+  AccessS3SaveWidth8    EQU    81h      ; < Save 8 bits data.
+  AccessS3SaveWidth16   EQU    130      ; < Save 16 bits data.
+  AccessS3SaveWidth32   EQU    131      ; < Save 32 bits data.
+  AccessS3SaveWidth64   EQU    132      ; < Save 64 bits data.
+ACCESS_WIDTH  TEXTEQU  <DWORD>
+
+ ; AGESA struct name
+
+   ; AGESA BASIC FUNCTIONS
+  AMD_INIT_RECOVERY     EQU    00020000h
+  AMD_CREATE_STRUCT     EQU    00020001h
+  AMD_INIT_EARLY        EQU    00020002h
+  AMD_INIT_ENV          EQU    00020003h
+  AMD_INIT_LATE         EQU    00020004h
+  AMD_INIT_MID          EQU    00020005h
+  AMD_INIT_POST         EQU    00020006h
+  AMD_INIT_RESET        EQU    00020007h
+  AMD_INIT_RESUME       EQU    00020008h
+  AMD_RELEASE_STRUCT    EQU    00020009h
+  AMD_S3LATE_RESTORE    EQU    0002000Ah
+  AMD_S3_SAVE           EQU    0002000Bh
+  AMD_GET_APIC_ID       EQU    0002000Ch
+  AMD_GET_PCI_ADDRESS   EQU    0002000Dh
+  AMD_IDENTIFY_CORE     EQU    0002000Eh
+  AMD_READ_EVENT_LOG    EQU    0002000Fh
+  AMD_GET_EXECACHE_SIZE EQU    00020010h
+  AMD_LATE_RUN_AP_TASK  EQU    00020011h
+  AMD_IDENTIFY_DIMMS    EQU    00020012h
+AGESA_STRUCT_NAME  TEXTEQU  <DWORD>
+
+
+  ; ResetType constant values
+    WARM_RESET_WHENEVER         EQU    1
+    COLD_RESET_WHENEVER         EQU    2
+    WARM_RESET_IMMEDIATELY      EQU    3
+    COLD_RESET_IMMEDIATELY      EQU    4
+
+
+ ; AGESA Structures
+
+ ; The standard header for all AGESA services.
+AMD_CONFIG_PARAMS    STRUCT
+  ImageBasePtr                  UINT32 ?        ; < The AGESA Image base address.
+  Func                          UINT32 ?        ; < The service desired, @sa dispatch.h.
+  AltImageBasePtr               UINT32 ?        ; < Alternate Image location
+  CalloutPtr                    CALLOUT_ENTRY ?         ; < For Callout from AGESA
+  HeapStatus                    UINT8 ?         ; < For heap status from boot time slide.
+  HeapBasePtr                   UINT64 ?        ; < Location of the heap
+  Reserved                      UINT8 (7) DUP (?)      ; < This space is reserved for future use.
+AMD_CONFIG_PARAMS    ENDS
+
+
+ ; Create Struct Interface.
+AMD_INTERFACE_PARAMS    STRUCT
+  StdHeader                     AMD_CONFIG_PARAMS {}    ; < Config header
+  AgesaFunctionName             AGESA_STRUCT_NAME ?     ; < The service to init, @sa dispatch.h
+  AllocationMethod              ALLOCATION_METHOD ?     ; < How to handle buffer allocation
+  NewStructSize                 UINT32 ?        ; < The size of the allocated data, in for ByHost, else out only.
+  NewStructPtr                  POINTER ?       ; < The struct for the service.
+                                                   ; < The struct to init for ByHost allocation,
+                                                   ; < the initialized struct on return.
+AMD_INTERFACE_PARAMS    ENDS
+
+    FUNC_0                      EQU    0        ; bit-placed for PCI address creation
+    FUNC_1                      EQU    1
+    FUNC_2                      EQU    2
+    FUNC_3                      EQU    3
+    FUNC_4                      EQU    4
+    FUNC_5                      EQU    5
+    FUNC_6                      EQU    6
+    FUNC_7                      EQU    7
+
+ ; AGESA Binary module header structure
+AMD_IMAGE_HEADER    STRUCT
+  Signature                     UINT32 ?        ; < Binary Signature
+  CreatorID                     CHAR8 (8) DUP (?)       ; < 8 characters ID
+  Version                       CHAR8 (12) DUP (?)      ; < 12 characters version
+  ModuleInfoOffset              UINT32 ?        ; < Offset of module
+  EntryPointAddress             UINT32 ?        ; < Entry address
+  ImageBase                     UINT32 ?        ; < Image base
+  RelocTableOffset              UINT32 ?        ; < Relocate Table offset
+  ImageSize                     UINT32 ?        ; < Size
+  Checksum                      UINT16 ?        ; < Checksum
+  ImageType                     UINT8 ?         ; < Type
+  V_Reserved                    UINT8 ?         ; < Reserved
+AMD_IMAGE_HEADER    ENDS
+ ; AGESA Binary module header structure
+AMD_MODULE_HEADER    STRUCT
+  ModuleHeaderSignature         UINT32 ?        ; < Module signature
+  ModuleIdentifier              CHAR8 (8) DUP (?)       ; < 8 characters ID
+  ModuleVersion                 CHAR8 (12) DUP (?)      ; < 12 characters version
+  ModuleDispatcher              POINTER ?       ; < A pointer point to dispatcher
+  NextBlock                     POINTER ?       ; < Next module header link
+AMD_MODULE_HEADER    ENDS
+
+; AMD_CODE_HEADER Signatures.
+AGESA_CODE_SIGNATURE    TEXTEQU  <'!', '!', 'A', 'G', 'E', 'S', 'A', ' '>
+CIMXNB_CODE_SIGNATURE   TEXTEQU  <'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'>
+CIMXSB_CODE_SIGNATURE   TEXTEQU  <'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'>
+
+; AGESA_CODE_SIGNATURE
+AMD_CODE_HEADER    STRUCT
+  Signature             CHAR8 (8) DUP (?)           ; < code header Signature
+  ComponentName         CHAR8 (8) DUP (?)           ; < 8 character name of the code module
+  Version               CHAR8 (12) DUP (?)          ; < 12 character version string
+  TerminatorNull        CHAR8 ?                     ; < null terminated string
+  VerReserved           CHAR8 (7) DUP (?)           ; < reserved space
+AMD_CODE_HEADER    ENDS
+
+ ; Extended PCI address format
+EXT_PCI_ADDR    STRUCT
+  Register                      UINT32 ?
+;   IN OUT  UINT32      Register:12;                           ; < Register offset
+;   IN OUT  UINT32      Function:3;                     ; < Function number
+;   IN OUT  UINT32      Device:5;                       ; < Device number
+;   IN OUT  UINT32      Bus:8;                          ; < Bus number
+;   IN OUT  UINT32      Segment:4;                      ; < Segment
+EXT_PCI_ADDR    ENDS
+
+ ; Union type for PCI address
+PCI_ADDR    UNION
+  AddressValue                  UINT32 ?        ; < Formal address
+  Address                       EXT_PCI_ADDR {}         ; < Extended address
+PCI_ADDR    ENDS
+
+   ; SBDFO - Segment Bus Device Function Offset
+   ; 31:28   Segment (4-bits)
+   ; 27:20   Bus     (8-bits)
+   ; 19:15   Device  (5-bits)
+   ; 14:12   Function(3-bits)
+   ; 11:00   Offset  (12-bits)
+
+
+
+    ILLEGAL_SBDFO               EQU    0FFFFFFFFh
+
+ ; CPUID data received registers format
+CPUID_DATA    STRUCT
+  EAX_Reg                       UINT32 ?        ; < CPUID instruction result in EAX
+  EBX_Reg                       UINT32 ?        ; < CPUID instruction result in EBX
+  ECX_Reg                       UINT32 ?        ; < CPUID instruction result in ECX
+  EDX_Reg                       UINT32 ?        ; < CPUID instruction result in EDX
+CPUID_DATA    ENDS
+
+ ; HT frequency for external callbacks
+;typedef enum {
+  HT_FREQUENCY_200M     EQU    0        ; < HT speed 200 for external callbacks
+  HT_FREQUENCY_400M     EQU    2        ; < HT speed 400 for external callbacks
+  HT_FREQUENCY_600M     EQU    4        ; < HT speed 600 for external callbacks
+  HT_FREQUENCY_800M     EQU    5        ; < HT speed 800 for external callbacks
+  HT_FREQUENCY_1000M    EQU    6        ; < HT speed 1000 for external callbacks
+  HT_FREQUENCY_1200M    EQU    7        ; < HT speed 1200 for external callbacks
+  HT_FREQUENCY_1400M    EQU    8        ; < HT speed 1400 for external callbacks
+  HT_FREQUENCY_1600M    EQU    9        ; < HT speed 1600 for external callbacks
+  HT_FREQUENCY_1800M    EQU    10       ; < HT speed 1800 for external callbacks
+  HT_FREQUENCY_2000M    EQU    11       ; < HT speed 2000 for external callbacks
+  HT_FREQUENCY_2200M    EQU    12       ; < HT speed 2200 for external callbacks
+  HT_FREQUENCY_2400M    EQU    13       ; < HT speed 2400 for external callbacks
+  HT_FREQUENCY_2600M    EQU    14       ; < HT speed 2600 for external callbacks
+  HT_FREQUENCY_2800M    EQU    17       ; < HT speed 2800 for external callbacks
+  HT_FREQUENCY_3000M    EQU    18       ; < HT speed 3000 for external callbacks
+  HT_FREQUENCY_3200M    EQU    19       ; < HT speed 3200 for external callbacks
+  HT_FREQUENCY_MAX      EQU    20       ; < Limit Check.
+HT_FREQUENCIES  TEXTEQU  <DWORD> ;} HT_FREQUENCIES;
+
+HT3_FREQUENCY_MIN     EQU    HT_FREQUENCY_1200M
+
+IFNDEF   BIT0
+    BIT0                        EQU    0000000000000001h
+ENDIF
+IFNDEF   BIT1
+    BIT1                        EQU    0000000000000002h
+ENDIF
+IFNDEF   BIT2
+    BIT2                        EQU    0000000000000004h
+ENDIF
+IFNDEF   BIT3
+    BIT3                        EQU    0000000000000008h
+ENDIF
+IFNDEF   BIT4
+    BIT4                        EQU    0000000000000010h
+ENDIF
+IFNDEF   BIT5
+    BIT5                        EQU    0000000000000020h
+ENDIF
+IFNDEF   BIT6
+    BIT6                        EQU    0000000000000040h
+ENDIF
+IFNDEF   BIT7
+    BIT7                        EQU    0000000000000080h
+ENDIF
+IFNDEF   BIT8
+    BIT8                        EQU    0000000000000100h
+ENDIF
+IFNDEF   BIT9
+    BIT9                        EQU    0000000000000200h
+ENDIF
+IFNDEF   BIT10
+    BIT10                       EQU    0000000000000400h
+ENDIF
+IFNDEF   BIT11
+    BIT11                       EQU    0000000000000800h
+ENDIF
+IFNDEF   BIT12
+    BIT12                       EQU    0000000000001000h
+ENDIF
+IFNDEF   BIT13
+    BIT13                       EQU    0000000000002000h
+ENDIF
+IFNDEF   BIT14
+    BIT14                       EQU    0000000000004000h
+ENDIF
+IFNDEF   BIT15
+    BIT15                       EQU    0000000000008000h
+ENDIF
+IFNDEF   BIT16
+    BIT16                       EQU    0000000000010000h
+ENDIF
+IFNDEF   BIT17
+    BIT17                       EQU    0000000000020000h
+ENDIF
+IFNDEF   BIT18
+    BIT18                       EQU    0000000000040000h
+ENDIF
+IFNDEF   BIT19
+    BIT19                       EQU    0000000000080000h
+ENDIF
+IFNDEF   BIT20
+    BIT20                       EQU    0000000000100000h
+ENDIF
+IFNDEF   BIT21
+    BIT21                       EQU    0000000000200000h
+ENDIF
+IFNDEF   BIT22
+    BIT22                       EQU    0000000000400000h
+ENDIF
+IFNDEF   BIT23
+    BIT23                       EQU    0000000000800000h
+ENDIF
+IFNDEF   BIT24
+    BIT24                       EQU    0000000001000000h
+ENDIF
+IFNDEF   BIT25
+    BIT25                       EQU    0000000002000000h
+ENDIF
+IFNDEF   BIT26
+    BIT26                       EQU    0000000004000000h
+ENDIF
+IFNDEF   BIT27
+    BIT27                       EQU    0000000008000000h
+ENDIF
+IFNDEF   BIT28
+    BIT28                       EQU    0000000010000000h
+ENDIF
+IFNDEF   BIT29
+    BIT29                       EQU    0000000020000000h
+ENDIF
+IFNDEF   BIT30
+    BIT30                       EQU    0000000040000000h
+ENDIF
+IFNDEF   BIT31
+    BIT31                       EQU    0000000080000000h
+ENDIF
+IFNDEF   BIT32
+    BIT32                       EQU    0000000100000000h
+ENDIF
+IFNDEF   BIT33
+    BIT33                       EQU    0000000200000000h
+ENDIF
+IFNDEF   BIT34
+    BIT34                       EQU    0000000400000000h
+ENDIF
+IFNDEF   BIT35
+    BIT35                       EQU    0000000800000000h
+ENDIF
+IFNDEF   BIT36
+    BIT36                       EQU    0000001000000000h
+ENDIF
+IFNDEF   BIT37
+    BIT37                       EQU    0000002000000000h
+ENDIF
+IFNDEF   BIT38
+    BIT38                       EQU    0000004000000000h
+ENDIF
+IFNDEF   BIT39
+    BIT39                       EQU    0000008000000000h
+ENDIF
+IFNDEF   BIT40
+    BIT40                       EQU    0000010000000000h
+ENDIF
+IFNDEF   BIT41
+    BIT41                       EQU    0000020000000000h
+ENDIF
+IFNDEF   BIT42
+    BIT42                       EQU    0000040000000000h
+ENDIF
+IFNDEF   BIT43
+    BIT43                       EQU    0000080000000000h
+ENDIF
+IFNDEF   BIT44
+    BIT44                       EQU    0000100000000000h
+ENDIF
+IFNDEF   BIT45
+    BIT45                       EQU    0000200000000000h
+ENDIF
+IFNDEF   BIT46
+    BIT46                       EQU    0000400000000000h
+ENDIF
+IFNDEF   BIT47
+    BIT47                       EQU    0000800000000000h
+ENDIF
+IFNDEF   BIT48
+    BIT48                       EQU    0001000000000000h
+ENDIF
+IFNDEF   BIT49
+    BIT49                       EQU    0002000000000000h
+ENDIF
+IFNDEF   BIT50
+    BIT50                       EQU    0004000000000000h
+ENDIF
+IFNDEF   BIT51
+    BIT51                       EQU    0008000000000000h
+ENDIF
+IFNDEF   BIT52
+    BIT52                       EQU    0010000000000000h
+ENDIF
+IFNDEF   BIT53
+    BIT53                       EQU    0020000000000000h
+ENDIF
+IFNDEF   BIT54
+    BIT54                       EQU    0040000000000000h
+ENDIF
+IFNDEF   BIT55
+    BIT55                       EQU    0080000000000000h
+ENDIF
+IFNDEF   BIT56
+    BIT56                       EQU    0100000000000000h
+ENDIF
+IFNDEF   BIT57
+    BIT57                       EQU    0200000000000000h
+ENDIF
+IFNDEF   BIT58
+    BIT58                       EQU    0400000000000000h
+ENDIF
+IFNDEF   BIT59
+    BIT59                       EQU    0800000000000000h
+ENDIF
+IFNDEF   BIT60
+    BIT60                       EQU    1000000000000000h
+ENDIF
+IFNDEF   BIT61
+    BIT61                       EQU    2000000000000000h
+ENDIF
+IFNDEF   BIT62
+    BIT62                       EQU    4000000000000000h
+ENDIF
+IFNDEF   BIT63
+    BIT63                       EQU    8000000000000000h
+ENDIF
+
diff --git a/src/vendorcode/amd/agesa/f15/Legacy/bridge32.inc b/src/vendorcode/amd/agesa/f15/Legacy/bridge32.inc
new file mode 100644
index 0000000000..e6b9538657
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Legacy/bridge32.inc
@@ -0,0 +1,577 @@
+; ****************************************************************************
+; *
+; * @file
+; *
+; * Agesa structures and definitions
+; *
+; * Contains AMD AGESA core interface
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  Include
+; * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+;
+; ****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+
+PARAM1          textequ <[bp+8]>
+PARAM2          textequ <[bp+12]>
+PARAM3          textequ <[bp+16]>
+RETAddress      textequ <[bp+4]>
+
+AMD_PRIVATE_PARAMS STRUCT
+    Gate16_CS   DW ?                ; Segment of AMD_BRIDGE_32 and AMD_CALLOUT_16
+    Gate16_SS   DW ?                ; RM stack segment
+    Router_Seg  DW ?                ; Segment of oem router
+    Router_Off  DW ?                ; Offset of oem router
+AMD_PRIVATE_PARAMS ENDS
+
+; OEM may pre-define the GDT and selector offsets. If they do not, use our defaults.
+IFNDEF  AGESA_SELECTOR_GDT
+        AGESA_SELECTOR_GDT         EQU 00h
+ENDIF
+IFNDEF  AGESA_SELECTOR_CODE16
+        AGESA_SELECTOR_CODE16      EQU 08h
+ENDIF
+IFNDEF  AGESA_SELECTOR_DATA16
+        AGESA_SELECTOR_DATA16      EQU 10h
+ENDIF
+IFNDEF  AGESA_SELECTOR_CODE32
+        AGESA_SELECTOR_CODE32      EQU 18h
+ENDIF
+IFNDEF  AGESA_SELECTOR_DATA32
+        AGESA_SELECTOR_DATA32      EQU 20h
+ENDIF
+
+
+AMD_BRIDGE_32_GDT MACRO  GDT_Name:REQ
+
+        GDT_Name LABEL BYTE
+            DD 000000000h, 000000000h       ; NULL descriptor
+            DD 00000ffffh, 000009b00h       ; 16-bit code, fixed up
+            DD 00000ffffh, 000009300h       ; 16-bit data, fixed up
+            DD 00000ffffh, 000CF9B00h       ; 32-bit protected mode code
+            DD 00000ffffh, 000CF9300h       ; 32-bit protected mode data
+        GDT_Length EQU ($-GDT_Name)
+
+ENDM
+
+;+-------------------------------------------------------------------------
+;
+;       AMD_BRIDGE_32 - Execute Agesa through Pushhigh interface
+;
+;   Processing:
+;       The following steps are taken:
+;       1) Enter 32bit Protected Mode (PM32)
+;       2) Run AGESA code
+;       3) Restore Real Mode (RM)
+;
+; Entry:
+;       [big real mode] : ds, es set to base 0 limit 4G segment
+;       EDX - if not 0, provides a FAR PTR to oem router (Seg | Offset)
+;       ESI - configuration block pointer
+;
+; Exit:
+;       EAX - return value
+;       ESI - configuration block pointer
+;       ds, es, fs, gs - Set to 4GB segment limit for Big Real Mode
+;
+; Modified:
+;      None
+;
+
+AMD_BRIDGE_32 MACRO GDT_Name
+
+        local   copyGDT
+        local   flushTo16PM
+        local   agesaReturnAddress
+        local   leave32bitPM
+        local   flush2RM
+
+        push    gs
+        push    fs
+        push    ebx
+        push    ecx
+        push    edi
+        mov     eax, esp
+        push    eax
+        movzx   esp, sp
+;
+; Do not use any locals here, BP will be changed frequently during RM->PM32->RM
+;
+        pushf
+        cli                         ; Disable interrupts during AGESA
+        cld                         ; Need known direction flag during AGESA
+
+;
+; Save the FAR PTR input parameter
+;
+        mov     gs, dx                  ; Offset
+        shr     edx, 16
+        mov     fs, dx                  ; Segment
+;
+; Determine where our binary file is and get entry point
+;
+        mov     edx, (AMD_CONFIG_PARAMS PTR [esi]).ImageBasePtr
+        add     edx, (AMD_IMAGE_HEADER PTR [edx]).EntryPointAddress
+;
+; Figure out the return address we will use after calling AGESA
+; and store it in ebx until we have our stack set up properly
+;
+        mov     ebx, cs
+        shl     ebx, 4
+        add     ebx, OFFSET agesaReturnAddress
+;
+; Save our current RM stack AND entry EBP
+;
+        push    ebp
+;       push    esp
+        push    ss
+
+;
+; BEGIN --- STACK MUST BE BALANCED AT THIS POINT --- BEGIN
+;
+; Copy the GDT onto the stack for modification
+;
+        mov     cx, GDT_Length
+        sub     sp, cx
+        mov     bp, sp
+        lea     di, GDT_Name
+copyGDT:
+        mov     al, cs:[di]
+        mov     [bp], al
+        inc     di
+        inc     bp
+        loop    copyGDT
+;
+; Patch 16-bit code and data descriptors on stack.  We will
+; fix up CS and SS for PM16 during the callout if applicable.
+;
+        mov     bp, sp
+
+        mov     eax, cs
+        shl     eax, 4
+        mov     [bp+AGESA_SELECTOR_CODE16+2], ax
+        shr     eax, 16
+        mov     [bp+AGESA_SELECTOR_CODE16+4], al
+
+        mov     eax, ss
+        shl     eax, 4
+        mov     [bp+AGESA_SELECTOR_DATA16+2], ax
+        shr     eax, 16
+        mov     [bp+AGESA_SELECTOR_DATA16+4], al
+;
+; Need to place Length and Address on GDT
+;
+        mov     eax, ss
+        shl     eax, 4
+        add     eax, esp
+        push    eax
+        push    WORD PTR (GDT_Length-1)
+;
+; Load the GDT
+;
+        mov     bp, sp
+        lgdt    FWORD PTR [bp]
+;
+; TABLE 1
+;
+; Place PRIVATE DATA on stack DIRECTLY following GDT
+; During this routine, stack data is critical.  If
+; order is changed or additional added, bad things
+; will happen!
+;
+; HIGHEST PHYSICAL ADDRESS
+;
+; | ...                  |
+; ------------------------
+; | old RM SP            |
+; | old RM SS            |
+; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS + (SIZEOF GDT_LENGTH + 6 {size, address})
+; | GDT_DATA32           |
+; | ...                  |
+; | GDT_NULL             |
+; | GDT Addr, Length     |
+; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS
+; | Priv.Gate16_SS       |
+; | Priv.Gate16_CS       |
+; ------------------------ sp
+; ------ THEN PUSH -------
+; | Return to 16-bit CS  |
+; | Return to 16-bit Off |
+; | ...                  |
+;
+; LOWEST  PHYSICAL ADDRESS
+;
+        mov     edi, esp
+        sub     edi, SIZEOF AMD_PRIVATE_PARAMS
+        mov     ax, cs
+        mov     (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS, ax
+        mov     ax, ss
+        mov     (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS, ax
+        mov     (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off, gs
+        mov     (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg, fs
+
+        mov     esp, edi
+;
+; Save an address for returning to 16 bit real mode on stack,
+; we'll use it in a far ret after turning off CR0.PE so that
+; we can take our address off and force a far jump.  Be sure
+; no unexpected data is on the stack after this!
+;
+        mov     ax, cs
+        push    cs
+        lea     ax, flush2RM
+        push    ax
+;
+; Convert ss:esp to "flat"
+;
+
+        mov     ax, sp
+        push    ax
+        mov     eax, ss
+        shl     eax, 4
+        add     eax, esp
+        mov     esp, eax                ; Load the zero based ESP
+
+;
+; Set CR0.PE
+;
+        mov     eax, CR0                ; Get CPU control word 0
+        or      al, 01                  ; Enable CPU protected mode
+        mov     CR0, eax                ; Write back to CPU control word 0
+        jmp     flushTo16PM
+
+flushTo16PM:
+;
+; 16-bit protected mode
+;
+        mov     ax, AGESA_SELECTOR_DATA32
+        mov     ds, ax
+        mov     es, ax
+        mov     fs, ax
+        mov     gs, ax
+        mov     ss, ax
+;
+; Push our parameters RIGHT TO LEFT, and then return address
+;
+        push    esi                     ; AGESA configuration block pointer (data)
+        push    ebx                     ; after AGESA return offset (32PM flat) - consumed by dispatcher ret
+        pushd   AGESA_SELECTOR_CODE32   ; AGESA entry selector (32PM flat)
+        push    edx                     ; AGESA entry point (32PM flat)
+
+        DB      066h
+        retf                            ; <><><> Enter AGESA 32-bit code!!! <><><>
+
+agesaReturnAddress:
+;
+; Returns from the Agesa 32-bit code still PM32
+;
+        DB      0EAh
+        DD      OFFSET leave32bitPM
+        DW      AGESA_SELECTOR_CODE16
+
+leave32bitPM:
+;
+; Now in 16-bit PM
+;
+        add     esp, 4                  ; +4 to remove our config block pointer
+;
+; Eax reserve AGESA_STATUS return code, save it
+;
+        mov     ebx, eax
+;
+; Turn off CR0.PE, restore 64K stack limit
+;
+        pop     ax
+        mov     sp, ax
+        mov     ax, AGESA_SELECTOR_DATA16
+        mov     ss, ax
+
+        mov     eax, CR0
+        and     al, NOT 1               ; Disable protected mode
+        mov     CR0, eax                ; Write back CR0.PE
+;
+; Jump far to enter RM, we saved this address on the stack
+; already.  Hopefully stack is balanced through AGESA
+; nor were any params added by pushing them on the stack and
+; not removing them between BEGIN-END comments.
+;
+        retf
+
+flush2RM:
+;
+; Set segments registers for big real mode before returning
+;
+        xor     ax, ax
+        mov     ds, ax
+        mov     es, ax
+        mov     fs, ax
+        mov     gs, ax
+;
+; Discard GDT, +6 for GDT pointer/size, privates
+;
+        add     esp, GDT_Length + 6 + SIZEOF AMD_PRIVATE_PARAMS
+;
+; Restore real mode stack and entry EBP
+;
+        pop     cx
+;       mov     esp, [esp]
+        mov     ss, cx
+        pop     ebp
+;
+; Restore AGESA_STATUS return code to eax
+;
+        mov     eax, ebx
+;
+; END --- STACK MUST BE BALANCED TO THIS POINT --- END
+;
+
+        popf
+        pop     ebx
+        mov     esp, ebx
+        pop     edi
+        pop     ecx
+        pop     ebx
+        pop     fs
+        pop     gs
+                            ; EXIT AMD_BRIDGE_32
+ENDM
+;+-------------------------------------------------------------------------
+;
+; AMD_CALLOUT_16 - Execute Callback from Pushhigh interface
+;
+;   Processing:
+;       The following steps are taken:
+;       1) Enter PM16
+;       2) Setup stack, get private params
+;       3) Enter RM
+;       4) Get 3 params
+;       5) Call oemCallout OR oem router
+;       6) Enter PM32
+;       7) Return to Agesa PH
+;
+; Entry:
+;       [32-bit protected mode]
+;       [esp+8] Func
+;       [esp+12] Data
+;       [esp+16] Configuration Block
+;       [esp+4] return address to Agesa
+;
+; Exit:
+;       [32-bit protected mode]
+;
+; Modified:
+;     None
+;
+AMD_CALLOUT_16 MACRO  LocalOemCalloutRouter
+;
+; Note that we are still PM32, so MASM may work strangely
+;
+
+        push    bp                     ; Save our original SP to access params
+        mov     bp, sp
+        push    bx
+        push    si
+        push    di
+        push    cx
+        push    dx
+        push    di
+
+        DB      066h, 0EAh
+        DW      OFFSET PM16Entry
+        DW      AGESA_SELECTOR_CODE16
+
+PM16Entry:
+;
+; PM16 CS, but still PM32 SS, as we need to access our private params
+; before we enter RM.
+;
+; Note: we are working below the stack temporarily, and and it will
+; not affect our ability to get entry params
+;
+        xor     ecx, ecx
+        xor     edx, edx
+;
+; SGDT will give us the original location of the GDT on our CAS stack.
+; We need this value because our private parameters are located just
+; below the GDT.
+;
+        mov     edi, esp
+        sub     edi, GDT_Length + 6
+        sgdt    FWORD PTR [edi]        ; [edi] = word size, dword address
+        mov     edi, DWORD PTR [edi+2]  ; Get the PM32 address only
+        sub     edi, SIZEOF AMD_PRIVATE_PARAMS + 6
+;
+; cx = code segment of this code in RM
+; dx = stack segment of CAS in RM
+; fs = code segment of oem router (save for later)
+; gs = offset of oem router (save for later)
+; fs and gs are loaded after switch to real mode because we can't
+; use them as scratch pad registers in protected mode
+;
+        mov     cx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS
+        mov     dx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS
+
+        mov     eax, edi             ; Save edi in eax for after RM switch
+        mov     edi, esp             ; Save our current ESP for RM
+
+        movzx   ebx, dx
+        shl     ebx, 4
+        sub     esp, ebx
+
+;
+; We had been accessing the stack in PM32, we will now change to PM16 so we
+; will make the stack segment 64KB limit so SP needs to be fixed made PM16
+; compatible.
+;
+        mov     bx, AGESA_SELECTOR_DATA16
+        mov     ss, bx
+
+;
+; Save the RM segment and RM offset of the jump we will need to make in
+; order to enter RM so that code in this segment is relocatable.
+;
+; BEGIN --- Don't unbalance the stack --- BEGIN
+;
+        push    cx
+        pushw   OFFSET RMEntry
+
+        mov     ebx, CR0
+        and     bl, NOT 1
+        mov     CR0, ebx                ; CR0.PE cleared
+;
+; Far jump to clear segment descriptor cache and enter RM
+;
+        retf
+
+RMEntry:
+;
+; We are in RM, setup RM stack
+;
+        movzx   ebx, dx               ; Get RM SS in ebx
+        shl     ebx, 4                  ; Get our stack top on entry in EBP to
+        sub     ebp, ebx                ; access our entry parameters
+        sub     eax, ebx                ; save copy of parameters address
+        mov     ss, dx                  ; Set stack segment
+;
+; We are going to figure out the address to use when we return
+; and have to go back into PM32 while we have access to it
+;
+        movzx   ebx, cx               ; Get original CS in ebx
+        shl     ebx, 4
+        add     ebx, OFFSET PM32Entry
+;
+; Now we put our data, func, block params into calling convention
+; for our hook
+;
+; ECX = Func
+; EDX = Data
+; ESI = config pointer
+;
+        mov     ecx, PARAM1             ; Func
+        mov     edx, PARAM2             ; Data
+        mov     esi, PARAM3             ; pointer
+
+        push    ebx                    ; Save PM32 mode switch address
+        push    edi                    ; Save PM32 stack pointer
+        pushf
+;
+; Get Router Function Address
+;
+        mov     edi, eax
+        mov     ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg
+        mov     fs, ax
+        mov     ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off
+        mov     gs, ax
+
+        mov     eax, AGESA_UNSUPPORTED  ; Default return value
+;
+; If AMD_BRIDGE_32 EDX == 0 call oemCallout
+; otherwise call FAR PTR EDX
+;
+; Critical:
+;   sp+2 - EDI aka PM32 stack address
+;   sp+4 - address of PM32Entry in PM32
+;
+        mov     bx, fs
+        shl     ebx, 16
+        mov     bx, gs
+
+        .if (ebx == 0)
+            call        LocalOemCalloutRouter
+        .else
+;
+; Make far call to Router function
+;
+        push    cs
+        push    offset CalloutReturn
+        push    ebx
+        retf
+CalloutReturn:
+    .endif
+;
+; Restore PM32 esp from RM stack
+;
+        popf
+        pop     edi                     ; Our PM32 stack pointer
+        pop     edx                     ; Our PM32 mode switch address
+
+        mov     ebx, CR0
+        or      bl, 1                   ; CR0.PE set
+        mov     CR0, ebx
+
+        mov     ebx, AGESA_SELECTOR_DATA32
+        pushd   AGESA_SELECTOR_CODE32 ; PM32 selector
+        push    edx                    ; PM32 entry point
+
+        DB      066h
+        retf                        ; Far jump to enter PM32
+
+PM32Entry:
+;
+; END --- Don't unbalance the stack --- END
+; We are now PM32, so remember MASM is assembling in 16-bit again
+;
+        mov     ss, bx
+        mov     ds, bx
+        mov     es, bx
+        mov     fs, bx
+        mov     gs, bx
+
+        mov     sp, di
+        pop     di
+        pop     dx
+        pop     cx
+        pop     di
+        pop     si
+        pop     bx
+        pop     bp
+                            ; EXIT AMD_CALLOUT_16
+ENDM
diff --git a/src/vendorcode/amd/agesa/f15/Lib/IA32/amdlib32.asm b/src/vendorcode/amd/agesa/f15/Lib/IA32/amdlib32.asm
new file mode 100644
index 0000000000..5bebc1a29c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Lib/IA32/amdlib32.asm
@@ -0,0 +1,671 @@
+;/**
+; * @file
+; *
+; * Agesa library 32bit
+; *
+; * Contains AMD AGESA Library
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  Lib
+; * @e \$Revision: 17071 $   @e \$Date: 2009-07-30 10:13:11 -0700 (Thu, 30 Jul 2009) $
+; */
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+
+.586p
+.xmm
+.model  flat
+ASSUME FS:NOTHING
+.code
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write IO byte
+; *
+; *  @param[in]   Address IO port address
+; *  @param[in]   Data    IO port Value
+; */
+
+public  WriteIo8
+WriteIo8        PROC NEAR C USES DX AX Address:WORD, Data:Byte
+        mov     dx, Address
+        mov     al, Data
+        out     dx, al
+        ret
+WriteIo8        ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write IO word
+; *
+; *  @param[in]   Address IO port address
+; *  @param[in]   Data    IO port Value
+; */
+public WriteIo16
+WriteIo16       PROC NEAR C USES DX AX Address:WORD, Data:WORD
+        mov     dx, Address
+        mov     ax, Data
+        out     dx, ax
+        ret
+WriteIo16       ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write IO dword
+; *
+; *  @param[in]   Address IO port address
+; *  @param[in]   Data    IO port Value
+; */
+
+public WriteIo32
+WriteIo32       PROC NEAR C USES DX EAX Address:WORD, Data:DWORD
+        mov     dx, Address
+        mov     eax, Data
+        out     dx, eax
+        ret
+WriteIo32       ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read IO byte
+; *
+; *  @param[in] - IO port address
+; *  @retval      IO port Value
+; */
+public ReadIo8
+ReadIo8 PROC NEAR C USES DX Address:WORD
+        mov     dx, Address
+        in      al, dx
+        ret
+ReadIo8 ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read IO word
+; *
+; *  @param[in]   Address IO port address
+; *  @retval      IO port Value
+; */
+public ReadIo16
+ReadIo16        PROC NEAR C USES DX Address:WORD
+        mov     dx, Address
+        in      ax, dx
+        ret
+ReadIo16        ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read IO dword
+; *
+; *  @param[in]   Address  IO port address
+; *  @retval      IO port Value
+; */
+public ReadIo32
+ReadIo32        PROC NEAR C USES DX Address:WORD
+        mov     dx, Address
+        in      eax, dx
+        ret
+ReadIo32        ENDP
+
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read MSR
+; *
+; *  @param[in]  Address  MSR Address
+; *  @param[in]  Data     Pointer to data
+; *  @param[in]  ConfigPtr (Optional)
+; */
+public LibAmdMsrRead
+LibAmdMsrRead  PROC NEAR C USES ECX ESI EDX Address:DWORD, Value:PTR, ConfigPtr:PTR
+        mov     esi, ConfigPtr        ;Dummy read to avoid compilation warning
+        mov     ecx, Address
+        rdmsr
+        mov     esi, Value
+        mov     [esi],   eax
+        mov     [esi+4], edx
+        ret
+LibAmdMsrRead  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write MSR
+; *
+; *  @param[in]  Address    MSR Address
+; *  @param[in]  Data       Pointer to data
+; *  @param[in]  ConfigPtr  (Optional)
+; */
+public LibAmdMsrWrite
+LibAmdMsrWrite                PROC NEAR C USES ECX ESI EDX Address:DWORD, Data:PTR, ConfigPtr:PTR
+        mov     esi, ConfigPtr         ;Dummy read to avoid compilation warning
+        mov     ecx, Address
+        mov     esi, Data
+        mov     eax, [esi]
+        mov     edx, [esi+4]
+        wrmsr
+        ret
+LibAmdMsrWrite                ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read CPUID
+; *
+; *  @param[in]  Func   CPUID function
+; *  @param[in]  DATA   Pointer to CPUID_DATA to save cpuid data
+; *  @param[in]  ConfigPtr (Optional)
+; */
+public LibAmdCpuidRead
+LibAmdCpuidRead       PROC NEAR C  Func:DWORD, DATA:PTR, ConfigPtr:PTR
+        pushad
+        mov     esi, ConfigPtr           ;Dummy read to avoid compilation warning
+        mov     eax, Func
+        cpuid
+        mov     esi, DATA
+        mov     [esi],   eax
+        mov     [esi+4], ebx
+        mov     [esi+8], ecx
+        mov     [esi+12],edx
+        popad
+        ret
+LibAmdCpuidRead              ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read TSC
+; *
+; *
+; *
+; */
+
+public ReadTSC
+ReadTSC  PROC    NEAR C
+        rdtsc
+        ret
+ReadTSC  ENDP
+
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Set FS_BASE
+; *
+; *
+; *
+; * @param[in]  esi - Low Dword of physical address
+; * @param[in]  edi - High Dword of physical address
+; */
+SetFsBase  PROC NEAR PUBLIC USES EAX EBX ECX EDX EDI
+
+        mov     eax, ecx
+        mov     ecx, 0C0010015h ; HWCR
+        rdmsr
+        mov     ebx, eax
+        bts     eax, 17         ; HWCR.Wrap32Dis
+        wrmsr
+        xchg    edx, edi
+        mov     eax, esi
+        mov     esi, ebx
+
+        mov     ecx, 0C0000100h ; FS_BASE
+        wrmsr
+        ret
+
+SetFsBase  ENDP
+
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Restore MSR0C001_0015
+; *
+; * @param[in]  esi - Low Dword
+; * @param[in]  edi - High Dword
+; */
+RestoreHwcr PROC NEAR PUBLIC USES EAX ECX EDX
+
+        mov     ecx, 0C0010015h
+        mov     eax, esi
+        mov     edx, edi
+        wrmsr
+        ret
+
+RestoreHwcr ENDP
+
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read memory/MMIO byte
+; *
+; * @param[in]  Address - Memory Address
+; * @retval     Memory byte at given address
+; */
+Read64Mem8  PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD
+
+        mov     esi, DWORD PTR Address[0]
+        mov     edi, DWORD PTR Address[4]
+        test    edi, edi
+        jz      AccesBelow4G
+
+        push    fs
+        call    SetFsBase
+        xor     ebx, ebx
+        mov     al, fs:[ebx]
+        call    RestoreHwcr
+        pop     fs
+        jmp     Done
+AccesBelow4G:
+        mov     al, ds:[esi]
+Done:
+        ret
+
+Read64Mem8  ENDP
+
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read memory/MMIO word
+; *
+; * @param[in]  Address - Memory Address
+; * @retval     Memory word at given address
+; */
+Read64Mem16  PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD
+
+        mov     esi, DWORD PTR Address[0]
+        mov     edi, DWORD PTR Address[4]
+        test    edi, edi
+        jz      AccesBelow4G
+
+        push    fs
+        call    SetFsBase
+        xor     ebx, ebx
+        mov     ax, fs:[ebx]
+        call    RestoreHwcr
+        pop     fs
+        jmp     Done
+AccesBelow4G:
+        mov     ax, ds:[esi]
+Done:
+
+        ret
+
+Read64Mem16  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read memory/MMIO dword
+; *
+; * @param[in]  Address - Memory Address
+; * @retval     Memory dword at given address
+; */
+Read64Mem32  PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD
+
+        mov     esi, DWORD PTR Address[0]
+        mov     edi, DWORD PTR Address[4]
+        test    edi, edi
+        jz      AccesBelow4G
+
+        push    fs
+        call    SetFsBase
+        xor     ebx, ebx
+        mov     eax, fs:[ebx]
+        call    RestoreHwcr
+        pop     fs
+        jmp     Done
+AccesBelow4G:
+        mov     eax, ds:[esi]
+Done:
+        ret
+
+Read64Mem32  ENDP
+
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write memory/MMIO byte
+; *
+; * @param[in]  Address - Memory Address
+; * @param[in]  Value   - Value to write
+; */
+
+Write64Mem8  PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD, Data:BYTE
+
+        mov     esi, DWORD PTR Address[0]
+        mov     edi, DWORD PTR Address[4]
+        test    edi, edi
+        jz      AccesBelow4G
+
+        push    fs
+        call    SetFsBase
+        xor     ebx, ebx
+        mov     al, Data
+        mov     fs:[ebx], al
+        call    RestoreHwcr
+        pop     fs
+        jmp     Done
+AccesBelow4G:
+        mov     al, Data
+        mov     ds:[esi], al
+Done:
+
+        ret
+
+Write64Mem8  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write memory/MMIO word
+; *
+; * @param[in]  Address - Memory Address
+; * @param[in]  Value   - Value to write
+; */
+Write64Mem16  PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD, Data:WORD
+
+        mov     esi, DWORD PTR Address[0]
+        mov     edi, DWORD PTR Address[4]
+        test    edi, edi
+        jz      AccesBelow4G
+
+        push    fs
+        call    SetFsBase
+        xor     ebx, ebx
+        mov     ax, Data
+        mov     fs:[ebx], ax
+        call    RestoreHwcr
+        pop     fs
+        jmp     Done
+AccesBelow4G:
+        mov     ax, Data
+        mov     ds:[esi], ax
+Done:
+        ret
+
+Write64Mem16  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write memory/MMIO dword
+; *
+; * @param[in]  Address - Memory Address
+; * @param[in]  Value   - Value to write
+; */
+Write64Mem32  PROC NEAR C PUBLIC USES EBX EDI ESI Address:QWORD, Data:DWORD
+
+        mov     esi, DWORD PTR Address[0]
+        mov     edi, DWORD PTR Address[4]
+        test    edi, edi
+        jz      AccesBelow4G
+
+        push    fs
+        call    SetFsBase
+        xor     ebx, ebx
+        mov     eax, Data
+        mov     fs:[ebx], eax
+        call    RestoreHwcr
+        pop     fs
+        jmp     Done
+AccesBelow4G:
+        mov     eax, Data
+        mov     ds:[esi], eax
+
+Done:
+
+        ret
+
+Write64Mem32  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read various CPU registers
+; *
+; * @param[in]  Reg     Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7)
+; * @param[in]  Value   Value to write
+; */
+
+LibAmdReadCpuReg PROC NEAR C Reg:BYTE, Value:NEAR PTR DWORD
+    pushad
+    push ds
+
+    .if(Reg == 00h)
+        mov eax, cr0
+    .elseif(Reg == 04h)
+        mov eax, cr4
+    .elseif(Reg == 10h)
+        mov eax, dr0
+    .elseif(Reg == 11h)
+        mov eax, dr1
+    .elseif(Reg == 12h)
+        mov eax, dr2
+    .elseif(Reg == 13h)
+        mov eax, dr3
+    .elseif(Reg == 17h)
+        mov eax, dr7
+    .else
+        xor eax,eax
+    .endif
+
+    mov edi, Value
+    mov [edi], eax
+
+    pop ds
+    popad
+    ret
+LibAmdReadCpuReg ENDP
+
+
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write various CPU registers
+; *
+; * @param[in]  Reg     Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7)
+; * @param[in]  Value   Value to write
+; */
+
+LibAmdWriteCpuReg PROC NEAR C Reg:BYTE, Value:DWORD
+    mov eax, Value
+
+    .if(Reg == 00h)
+        mov cr0, eax
+    .elseif(Reg == 4)
+        mov cr4, eax
+    .elseif(Reg == 10h)
+        mov dr0, eax
+    .elseif(Reg == 11h)
+        mov dr1, eax
+    .elseif(Reg == 12h)
+        mov dr2, eax
+    .elseif(Reg == 13h)
+        mov dr3, eax
+    .elseif(Reg == 17h)
+        mov dr7, eax
+    .endif
+    ret
+LibAmdWriteCpuReg ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write back invalidate caches using wbinvd.
+; *
+; *
+; *
+; */
+
+PUBLIC LibAmdWriteBackInvalidateCache
+LibAmdWriteBackInvalidateCache PROC NEAR C
+    wbinvd
+    ret
+LibAmdWriteBackInvalidateCache ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Stop CPU
+; *
+; *
+; *
+; */
+
+PUBLIC StopHere
+StopHere PROC NEAR C
+@@:
+    jmp short @b
+StopHere ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Enter debugger on SimNow
+; *
+; *
+; *
+; */
+PUBLIC LibAmdSimNowEnterDebugger
+LibAmdSimNowEnterDebugger PROC NEAR C
+    pushad
+    mov     eax, 0BACCD00Bh         ; Backdoor in SimNow
+    mov     ebx, 2                  ; Select breakpoint feature
+    cpuid
+@@:
+    jmp short @b
+    popad
+    ret
+LibAmdSimNowEnterDebugger ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  IDS IO port write
+; *
+; * @param[in]  Address     IO Port Address
+; * @param[in]  Value       Value to write
+; * @param[in]  Flag        IDS flags
+; *
+; */
+
+PUBLIC IdsOutPort
+IdsOutPort PROC NEAR C Address:DWORD, Value:DWORD ,Flag:DWORD
+    push edx
+    push eax
+    push ebx
+    mov edx, Address
+    mov eax, Value
+    mov ebx, Flag
+    out dx, eax
+    pop ebx
+    pop eax
+    pop edx
+    ret
+IdsOutPort  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Force breakpoint on HDT
+; *
+; *
+; */
+PUBLIC LibAmdHDTBreakPoint
+LibAmdHDTBreakPoint PROC NEAR C
+
+    pushad
+
+    mov ecx, 0C001100Ah             ;bit 0 = HDT redirect
+    mov edi, 09C5A203Ah             ;Password
+    RDMSR                           ;
+    or al, 1                        ;
+    WRMSR                           ;
+    mov al, 0B2h                    ;Marker = B2
+    db 0F1h                         ;ICEBP
+
+    popad
+    ret
+
+LibAmdHDTBreakPoint ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Find the most right hand side non-zero bit with .
+; *
+; * @param[in]  Value       Value
+; */
+PUBLIC LibAmdBitScanForward
+LibAmdBitScanForward PROC NEAR C Value:DWORD
+    mov eax, Value
+    bsf eax, Value
+    .if (Zero?)
+      mov al,32
+    .endif
+    ret
+LibAmdBitScanForward  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Find the most left hand side non-zero bit.
+; *
+; * @param[in]  Value       Value
+; */
+PUBLIC LibAmdBitScanReverse
+LibAmdBitScanReverse PROC NEAR C Value:DWORD
+    mov eax, Value
+    bsr eax, Value
+    .if (Zero?)
+      mov al,0FFh
+    .endif
+    ret
+LibAmdBitScanReverse  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Flush specified number of cache line
+; *
+; *  @param[in]  Address      Physical address to be flushed
+; *  @param[in]  Count        number of cachelines to be flushed
+; */
+PUBLIC LibAmdCLFlush
+LibAmdCLFlush  PROC NEAR C Address:QWORD, Count:BYTE
+    pushad
+    mov ecx, 0C0010015h ; HWCR
+    rdmsr
+    mov esi, eax
+    mov edi, edx
+    bts eax, 17         ; HWCR.Wrap32Dis
+    wrmsr
+    xor eax, eax
+    mov edx, DWORD PTR Address[4]
+    mov ecx, 0C0000100h ; FS_BASE
+    wrmsr
+    mov eax, DWORD PTR Address[0]
+    movzx ecx, Count
+    @@:
+    mfence
+    clflush fs:[eax]
+    mfence
+    add eax,64
+    loop @B
+    call RestoreHwcr
+    popad
+    ret
+LibAmdCLFlush  ENDP
+
+END
diff --git a/src/vendorcode/amd/agesa/f15/Lib/IA32/ms_shift.asm b/src/vendorcode/amd/agesa/f15/Lib/IA32/ms_shift.asm
new file mode 100644
index 0000000000..18b8ee4dde
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Lib/IA32/ms_shift.asm
@@ -0,0 +1,110 @@
+;/**
+; * @file
+; *
+; * Agesa library 32bit
+; *
+; * Contains AMD AGESA Library
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  Lib
+; * @e \$Revision: 9201 $   @e \$Date: 2008-10-31 03:36:20 -0500 (Fri, 31 Oct 2008) $
+; */
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+
+.586p
+.model  flat
+ASSUME FS:NOTHING
+.code
+;/*++
+;
+;Routine Description:
+;
+;  Shifts a UINT64 to the right.
+;
+;Arguments:
+;
+;  EDX:EAX - UINT64 value to be shifted
+;  CL -      Shift count
+;
+;Returns:
+;
+;  EDX:EAX - shifted value
+;
+;--*/
+_aullshr  PROC NEAR C PUBLIC
+        .if (cl < 64)
+            .if (cl >= 32)
+                sub    cl, 32
+                mov    eax, edx
+                xor    edx, edx
+            .endif
+            shrd   eax, edx, cl
+            shr    edx, cl
+        .else
+            xor    eax, eax
+            xor    edx, edx
+        .endif
+        ret
+_aullshr ENDP
+
+;/*++
+;
+;Routine Description:
+;
+;  Shifts a UINT64 to the left.
+;
+;Arguments:
+;
+;  EDX:EAX - UINT64 value to be shifted
+;  CL -      Shift count
+;
+;Returns:
+;
+;  EDX:EAX - shifted value
+;
+;--*/
+_allshl  PROC NEAR C PUBLIC USES CX
+        .if (cl < 64)
+            .if (cl >= 32)
+                sub    cl, 32
+                mov    edx, eax
+                xor    eax, eax
+            .endif
+            shld   edx, eax, cl
+            shl    eax, cl
+        .else
+            xor    eax, eax
+            xor    edx, edx
+        .endif
+        ret
+_allshl ENDP
+
+END
diff --git a/src/vendorcode/amd/agesa/f15/Lib/IA32/msmemcpy.asm b/src/vendorcode/amd/agesa/f15/Lib/IA32/msmemcpy.asm
new file mode 100644
index 0000000000..9c098a69ae
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Lib/IA32/msmemcpy.asm
@@ -0,0 +1,84 @@
+;/**
+; * @file
+; *
+; * Agesa library 32bit
+; *
+; * Contains AMD AGESA Library
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  Lib
+; * @e \$Revision: 9201 $   @e \$Date: 2008-10-31 03:36:20 -0500 (Fri, 31 Oct 2008) $
+; */
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+
+.586p
+.model  flat
+ASSUME FS:NOTHING
+.code
+; void *memcpy( void *dest, void *src, size_t count );
+;
+; Copy count bytes from src to dest, returning dest.
+; ("c" is not legal as an assembly parameter name, replaced with value.)
+; Assume ES is set appropriately, 32 bit flat.
+;
+public memcpy
+memcpy  PROC NEAR C PUBLIC USES ECX EDI ESI dest:DWORD, src:DWORD, count:DWORD
+        pushf
+        cld     ; We will increment through *dest
+        mov     edi, dest
+        mov     esi, src
+        mov     ecx, count
+        rep movsb
+        mov eax, dest
+        popf
+        ret
+memcpy ENDP
+
+; void *memset( void *dest, int c, size_t count );
+;
+; At dest, set count bytes to byte value, returning dest.
+; ("c" is not legal as an assembly parameter name, replaced with value.)
+; Assume ES is set appropriately, 32 bit flat.
+;
+public memset
+memset  PROC NEAR C PUBLIC USES ECX EDI dest:DWORD, value:DWORD, count:DWORD
+        pushf
+        cld     ; We will increment through *dest
+        mov     edi, dest
+        mov     eax, value
+        mov     ecx, count
+        rep stosb
+        mov     eax, edi
+        popf
+        ret
+memset ENDP
+
+END
diff --git a/src/vendorcode/amd/agesa/f15/Lib/amdlib.c b/src/vendorcode/amd/agesa/f15/Lib/amdlib.c
new file mode 100644
index 0000000000..ca268ee05e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Lib/amdlib.c
@@ -0,0 +1,1355 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Library
+ *
+ * Contains interface to the AMD AGESA library
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Lib
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "amdlib.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE LIB_AMDLIB_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+BOOLEAN
+STATIC
+GetPciMmioAddress (
+     OUT   UINT64            *MmioAddress,
+     OUT   UINT32            *MmioSize,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+LibAmdGetDataFromPtr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       VOID         *Data,
+  IN       VOID         *DataMask,
+     OUT   UINT32       *TemData,
+     OUT   UINT32       *TempDataMask
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT8
+ReadIo8 (
+  IN       UINT16 Address
+  )
+{
+  return __inbyte (Address);
+}
+UINT16
+ReadIo16 (
+  IN       UINT16 Address
+  )
+{
+  return __inword (Address);
+}
+UINT32
+ReadIo32 (
+  IN       UINT16 Address
+  )
+{
+  return __indword (Address);
+}
+VOID
+WriteIo8 (
+  IN       UINT16 Address,
+  IN       UINT8 Data
+  )
+{
+  __outbyte (Address, Data);
+}
+VOID
+WriteIo16 (
+  IN       UINT16 Address,
+  IN       UINT16 Data
+  )
+{
+  __outword (Address, Data);
+}
+VOID
+WriteIo32 (
+  IN       UINT16 Address,
+  IN       UINT32 Data
+  )
+{
+   __outdword (Address, Data);
+}
+STATIC
+UINT64 SetFsBase (
+  UINT64 address
+  )
+{
+  UINT64 hwcr;
+  hwcr = __readmsr (0xC0010015);
+  __writemsr (0xC0010015, hwcr | 1 << 17);
+  __writemsr (0xC0000100, address);
+  return hwcr;
+}
+STATIC
+VOID
+RestoreHwcr (
+  UINT64
+  value
+  )
+{
+  __writemsr (0xC0010015, value);
+}
+UINT8
+Read64Mem8 (
+  IN       UINT64 Address
+  )
+{
+  UINT8 dataRead;
+  UINT64 hwcrSave;
+  if ((Address >> 32) == 0) {
+    return *(volatile UINT8 *) (UINTN) Address;
+  }
+  hwcrSave = SetFsBase (Address);
+  dataRead = __readfsbyte (0);
+  RestoreHwcr (hwcrSave);
+  return dataRead;
+}
+UINT16
+Read64Mem16 (
+  IN       UINT64 Address
+  )
+{
+  UINT16 dataRead;
+  UINT64 hwcrSave;
+  if ((Address >> 32) == 0) {
+    return *(volatile UINT16 *) (UINTN) Address;
+  }
+  hwcrSave = SetFsBase (Address);
+  dataRead = __readfsword (0);
+  RestoreHwcr (hwcrSave);
+  return dataRead;
+}
+UINT32
+Read64Mem32 (
+  IN       UINT64 Address
+  )
+{
+  UINT32 dataRead;
+  UINT64 hwcrSave;
+  if ((Address >> 32) == 0) {
+    return *(volatile UINT32 *) (UINTN) Address;
+  }
+  hwcrSave = SetFsBase (Address);
+  dataRead = __readfsdword (0);
+  RestoreHwcr (hwcrSave);
+  return dataRead;
+  }
+VOID
+Write64Mem8 (
+  IN       UINT64 Address,
+  IN       UINT8 Data
+  )
+{
+  if ((Address >> 32) == 0){
+    *(volatile UINT8 *) (UINTN) Address = Data;
+  }
+  else {
+    UINT64 hwcrSave;
+    hwcrSave = SetFsBase (Address);
+    __writefsbyte (0, Data);
+    RestoreHwcr (hwcrSave);
+  }
+}
+VOID
+Write64Mem16 (
+  IN       UINT64 Address,
+  IN       UINT16 Data
+  )
+{
+ if ((Address >> 32) == 0){
+   *(volatile UINT16 *) (UINTN) Address = Data;
+ }
+ else {
+   UINT64 hwcrSave;
+   hwcrSave = SetFsBase (Address);
+   __writefsword (0, Data);
+   RestoreHwcr (hwcrSave);
+ }
+}
+VOID
+Write64Mem32 (
+  IN       UINT64 Address,
+  IN       UINT32 Data
+  )
+{
+  if ((Address >> 32) == 0){
+    *(volatile UINT32 *) (UINTN) Address = Data;
+  }
+  else {
+    UINT64 hwcrSave;
+    hwcrSave = SetFsBase (Address);
+    __writefsdword (0, Data);
+    RestoreHwcr (hwcrSave);
+  }
+}
+VOID
+LibAmdReadCpuReg (
+  IN       UINT8 RegNum,
+     OUT   UINT32 *Value
+  )
+{
+    *Value = 0;
+    switch (RegNum){
+    case CR4_REG:
+      *Value = __readcr4 ();
+      break;
+    case DR0_REG:
+      *Value = __readdr (0);
+      break;
+    case DR1_REG:
+      *Value = __readdr (1);
+      break;
+    case DR2_REG:
+      *Value = __readdr (2);
+      break;
+    case DR3_REG:
+      *Value = __readdr (3);
+      break;
+    case DR7_REG:
+      *Value = __readdr (7);
+      break;
+    default:
+      *Value = -1;
+  }
+}
+VOID
+LibAmdWriteCpuReg (
+  IN       UINT8 RegNum,
+  IN       UINT32 Value
+  )
+{
+   switch (RegNum){
+    case CR4_REG:
+      __writecr4 (Value);
+      break;
+    case DR0_REG:
+      __writedr (0, Value);
+      break;
+    case DR1_REG:
+      __writedr (1, Value);
+      break;
+    case DR2_REG:
+      __writedr (2, Value);
+      break;
+    case DR3_REG:
+      __writedr (3, Value);
+      break;
+    case DR7_REG:
+      __writedr (7, Value);
+      break;
+    default:
+      ;
+  }
+}
+VOID
+LibAmdWriteBackInvalidateCache (
+  IN       VOID
+  )
+{
+  __wbinvd ();
+}
+VOID
+LibAmdHDTBreakPoint (
+  VOID
+  )
+{
+  __writemsr (0xC001100A, __readmsr (0xC001100A) | 1);
+  __debugbreak (); // do you really need icebp? If so, go back to asm code
+}
+UINT8
+LibAmdBitScanForward (
+  IN       UINT32 value
+  )
+{
+  UINTN Index;
+  for (Index = 0; Index < 32; Index++){
+    if (value & (1 << Index)) break;
+  }
+  return (UINT8) Index;
+}
+UINT8
+LibAmdBitScanReverse (
+  IN       UINT32 value
+)
+{
+  UINTN Index;
+  for (Index = 31; Index >= 0; Index--){
+      if (value & (1 << Index)) break;
+  }
+  return (UINT8) Index;
+}
+
+UINT64
+MsrRead (
+  IN       UINT32 MsrAddress
+  )
+{
+  return __readmsr (MsrAddress);
+}
+
+VOID
+MsrWrite (
+  IN       UINT32 MsrAddress,
+  IN			 UINT64 Value
+  )
+{
+  __writemsr (MsrAddress, Value);
+}
+
+VOID
+LibAmdMsrRead (
+  IN       UINT32 MsrAddress,
+     OUT   UINT64 *Value,
+  IN OUT   AMD_CONFIG_PARAMS *ConfigPtr
+  )
+{
+  *Value = __readmsr (MsrAddress);
+}
+VOID
+LibAmdMsrWrite (
+  IN       UINT32 MsrAddress,
+  IN       UINT64 *Value,
+  IN OUT   AMD_CONFIG_PARAMS *ConfigPtr
+  )
+{
+  __writemsr (MsrAddress, *Value);
+}
+void LibAmdCpuidRead (
+  IN       UINT32 CpuidFcnAddress,
+     OUT   CPUID_DATA* Value,
+  IN OUT   AMD_CONFIG_PARAMS *ConfigPtr
+  )
+{
+  __cpuid ((int *)Value, CpuidFcnAddress);
+}
+UINT64
+ReadTSC (
+  VOID
+  )
+{
+  return __rdtsc ();
+}
+VOID
+LibAmdSimNowEnterDebugger (
+  VOID
+  )
+{
+  STATIC CONST UINT8 opcode [] = {0x60,                             // pushad
+                                   0xBB, 0x02, 0x00, 0x00, 0x00,     // mov ebx, 2
+                                   0xB8, 0x0B, 0xD0, 0xCC, 0xBA,     // mov eax, 0xBACCD00B
+                                   0x0F, 0xA2,                       // cpuid
+                                   0x61,                             // popad
+                                   0xC3                              // ret
+                                 };
+  ((VOID (*)(VOID)) (size_t) opcode) (); // call the function
+}
+VOID F10RevDProbeFilterCritical (
+  IN       PCI_ADDR PciAddress,
+  IN       UINT32   PciRegister
+  )
+{
+  UINT64 msrsave;
+  msrsave = __readmsr (0xC001001F);
+  __writemsr (0xC001001F, msrsave | 1ULL << 46);  // EnableCf8ExtCfg
+  _mm_mfence ();
+  __outdword (0xCF8, PciAddress.AddressValue);
+  _mm_mfence ();
+  __outdword (0xCFC, PciRegister | 2);
+  _mm_mfence ();
+  __writemsr (0xC001001F, msrsave);
+}
+VOID
+IdsOutPort (
+  IN       UINT32 Addr,
+  IN       UINT32 Value,
+  IN       UINT32 Flag
+  )
+{
+  __outdword ((UINT16) Addr, Value);
+}
+VOID
+StopHere (
+  VOID
+  )
+{
+  VOLATILE UINTN x = 1;
+  while (x);
+}
+VOID
+LibAmdCLFlush (
+  IN       UINT64 Address,
+  IN       UINT8  Count
+  )
+{
+  UINT64 hwcrSave;
+  UINT8  *address32;
+  UINTN  Index;
+  address32 = 0;
+  hwcrSave = SetFsBase (Address);
+  for (Index = 0; Index < Count; Index++){
+    _mm_mfence ();
+    _mm_clflush_fs (&address32 [Index * 64]);
+  }
+  RestoreHwcr (hwcrSave);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Read IO port
+ *
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] IoAddress     IO port address
+ * @param[in] Value         Pointer to save data
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdIoRead (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT16 IoAddress,
+     OUT   VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  switch (AccessWidth) {
+  case AccessWidth8:
+  case AccessS3SaveWidth8:
+    *(UINT8 *) Value = ReadIo8 (IoAddress);
+    break;
+  case AccessWidth16:
+  case AccessS3SaveWidth16:
+    *(UINT16 *) Value = ReadIo16 (IoAddress);
+    break;
+  case AccessWidth32:
+  case AccessS3SaveWidth32:
+    *(UINT32 *) Value = ReadIo32 (IoAddress);
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Write IO port
+ *
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] IoAddress     IO port address
+ * @param[in] Value         Pointer to data
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdIoWrite (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT16 IoAddress,
+  IN       VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  switch (AccessWidth) {
+  case AccessWidth8:
+  case AccessS3SaveWidth8:
+    WriteIo8 (IoAddress, *(UINT8 *) Value);
+    break;
+  case AccessWidth16:
+  case AccessS3SaveWidth16:
+    WriteIo16 (IoAddress, *(UINT16 *) Value);
+    break;
+  case AccessWidth32:
+  case AccessS3SaveWidth32:
+    WriteIo32 (IoAddress, *(UINT32 *) Value);
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * IO read modify write
+ *
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] IoAddress     IO address
+ * @param[in] Data          OR data
+ * @param[in] DataMask      Mask to be used before data write back to register.
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdIoRMW (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT16 IoAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32  TempData;
+  UINT32  TempMask;
+  UINT32  Value;
+  LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
+  LibAmdIoRead (AccessWidth, IoAddress, &Value, StdHeader);
+  Value = (Value & (~TempMask)) | TempData;
+  LibAmdIoWrite (AccessWidth, IoAddress, &Value, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Poll IO register
+ *
+ *  Poll register until (RegisterValue & DataMask) ==  Data
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] IoAddress     IO address
+ * @param[in] Data          Data to compare
+ * @param[in] DataMask      And mask
+ * @param[in] Delay         Poll for time in 100ns (not supported)
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdIoPoll (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT16 IoAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN       UINT64 Delay,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32  TempData;
+  UINT32  TempMask;
+  UINT32  Value;
+  LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
+  do {
+    LibAmdIoRead (AccessWidth, IoAddress, &Value, StdHeader);
+  } while (TempData != (Value & TempMask));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Read memory/MMIO
+ *
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] MemAddress    Memory address
+ * @param[in] Value         Pointer to data
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdMemRead (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT64 MemAddress,
+     OUT   VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  switch (AccessWidth) {
+  case AccessWidth8:
+  case AccessS3SaveWidth8:
+    *(UINT8 *) Value = Read64Mem8 (MemAddress);
+    break;
+  case AccessWidth16:
+  case AccessS3SaveWidth16:
+    *(UINT16 *) Value = Read64Mem16 (MemAddress);
+    break;
+  case AccessWidth32:
+  case AccessS3SaveWidth32:
+    *(UINT32 *) Value = Read64Mem32 (MemAddress);
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Write memory/MMIO
+ *
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] MemAddress    Memory address
+ * @param[in] Value         Pointer to data
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdMemWrite (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT64 MemAddress,
+  IN       VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+
+  switch (AccessWidth) {
+  case AccessWidth8:
+  case AccessS3SaveWidth8:
+    Write64Mem8 (MemAddress, *((UINT8 *) Value));
+    break;
+  case AccessWidth16:
+  case AccessS3SaveWidth16:
+    Write64Mem16 (MemAddress, *((UINT16 *) Value));
+    break;
+  case AccessWidth32:
+  case AccessS3SaveWidth32:
+    Write64Mem32 (MemAddress, *((UINT32 *) Value));
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Memory/MMIO read modify write
+ *
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] MemAddress    Memory address
+ * @param[in] Data          OR data
+ * @param[in] DataMask      Mask to be used before data write back to register.
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdMemRMW (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT64 MemAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32  TempData;
+  UINT32  TempMask;
+  UINT32  Value;
+  LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
+  LibAmdMemRead (AccessWidth, MemAddress, &Value, StdHeader);
+  Value = (Value & (~TempMask)) | TempData;
+  LibAmdMemWrite (AccessWidth, MemAddress, &Value, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Poll Mmio
+ *
+ *  Poll register until (RegisterValue & DataMask) ==  Data
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] MemAddress    Memory address
+ * @param[in] Data          Data to compare
+ * @param[in] DataMask      AND mask
+ * @param[in] Delay         Poll for time in 100ns (not supported)
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdMemPoll (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT64 MemAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN       UINT64 Delay,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32  TempData;
+  UINT32  TempMask;
+  UINT32  Value;
+  LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
+  do {
+    LibAmdMemRead (AccessWidth, MemAddress, &Value, StdHeader);
+  } while (TempData != (Value & TempMask));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Read PCI config space
+ *
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] PciAddress    Pci address
+ * @param[in] Value         Pointer to data
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdPciRead (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR PciAddress,
+     OUT   VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 LegacyPciAccess;
+  UINT32 MMIOSize;
+  UINT64 RMWrite;
+  UINT64 RMWritePrevious;
+  UINT64 MMIOAddress;
+
+  ASSERT (StdHeader != NULL);
+  ASSERT (PciAddress.AddressValue != ILLEGAL_SBDFO);
+  if (!GetPciMmioAddress (&MMIOAddress, &MMIOSize, StdHeader)) {
+    // We need to convert our "portable" PCI address into a "real" PCI access
+    LegacyPciAccess = ((1 << 31) + (PciAddress.Address.Register & 0xFC) + (PciAddress.Address.Function << 8) + (PciAddress.Address.Device << 11) + (PciAddress.Address.Bus << 16) + ((PciAddress.Address.Register & 0xF00) << (24 - 8)));
+    if (PciAddress.Address.Register <= 0xFF) {
+      LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+      LibAmdIoRead (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader);
+    } else {
+      LibAmdMsrRead  (NB_CFG, &RMWritePrevious, StdHeader);
+      RMWrite = RMWritePrevious | 0x0000400000000000;
+      LibAmdMsrWrite (NB_CFG, &RMWrite, StdHeader);
+      LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+      LibAmdIoRead (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader);
+      LibAmdMsrWrite (NB_CFG, &RMWritePrevious, StdHeader);
+    }
+    IDS_HDT_CONSOLE (LIB_PCI_RD, "~PCI RD %08x = %08x\n", LegacyPciAccess, *(UINT32 *)Value);
+  } else {
+    // Setup the MMIO address
+    ASSERT ((MMIOAddress + MMIOSize) > (MMIOAddress + (PciAddress.AddressValue & 0x0FFFFFFF)));
+    MMIOAddress += (PciAddress.AddressValue & 0x0FFFFFFF);
+    LibAmdMemRead (AccessWidth, MMIOAddress, Value, StdHeader);
+    IDS_HDT_CONSOLE (LIB_PCI_RD, "~MMIO RD %08x = %08x\n", (UINT32) MMIOAddress, *(UINT32 *)Value);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Write PCI config space
+ *
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] PciAddress    Pci address
+ * @param[in] Value         Pointer to data
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdPciWrite (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR PciAddress,
+  IN       VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 LegacyPciAccess;
+  UINT32 MMIOSize;
+  UINT64 RMWrite;
+  UINT64 RMWritePrevious;
+  UINT64 MMIOAddress;
+
+  ASSERT (StdHeader != NULL);
+  ASSERT (PciAddress.AddressValue != ILLEGAL_SBDFO);
+  if (!GetPciMmioAddress (&MMIOAddress, &MMIOSize, StdHeader)) {
+    // We need to convert our "portable" PCI address into a "real" PCI access
+    LegacyPciAccess = ((1 << 31) + (PciAddress.Address.Register & 0xFC) + (PciAddress.Address.Function << 8) + (PciAddress.Address.Device << 11) + (PciAddress.Address.Bus << 16) + ((PciAddress.Address.Register & 0xF00) << (24 - 8)));
+    if (PciAddress.Address.Register <= 0xFF) {
+      LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+      LibAmdIoWrite (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader);
+    } else {
+      LibAmdMsrRead  (NB_CFG, &RMWritePrevious, StdHeader);
+      RMWrite = RMWritePrevious | 0x0000400000000000;
+      LibAmdMsrWrite (NB_CFG, &RMWrite, StdHeader);
+      LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+      LibAmdIoWrite (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader);
+      LibAmdMsrWrite (NB_CFG, &RMWritePrevious, StdHeader);
+    }
+    IDS_HDT_CONSOLE (LIB_PCI_WR, "~PCI WR %08x = %08x\n", LegacyPciAccess, *(UINT32 *)Value);
+  } else {
+    // Setup the MMIO address
+    ASSERT ((MMIOAddress + MMIOSize) > (MMIOAddress + (PciAddress.AddressValue & 0x0FFFFFFF)));
+    MMIOAddress += (PciAddress.AddressValue & 0x0FFFFFFF);
+    LibAmdMemWrite (AccessWidth, MMIOAddress, Value, StdHeader);
+    IDS_HDT_CONSOLE (LIB_PCI_WR, "~MMIO WR %08x = %08x\n", (UINT32) MMIOAddress, *(UINT32 *)Value);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * PCI read modify write
+ *
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] PciAddress    Pci address
+ * @param[in] Data          OR Data
+ * @param[in] DataMask      Mask to be used before data write back to register.
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdPciRMW (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR PciAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32  TempData;
+  UINT32  TempMask;
+  UINT32  Value;
+  LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
+  LibAmdPciRead (AccessWidth, PciAddress, &Value, StdHeader);
+  Value = (Value & (~TempMask)) | TempData;
+  LibAmdPciWrite (AccessWidth, PciAddress, &Value, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Poll PCI config space register
+ *
+ *  Poll register until (RegisterValue & DataMask) ==  Data
+ *
+ * @param[in] AccessWidth   Access width
+ * @param[in] PciAddress    Pci address
+ * @param[in] Data          Data to compare
+ * @param[in] DataMask      AND mask
+ * @param[in] Delay         Poll for time in 100ns (not supported)
+ * @param[in] StdHeader     Standard configuration header
+ *
+ */
+VOID
+LibAmdPciPoll (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR PciAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN       UINT64 Delay,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32  TempData;
+  UINT32  TempMask;
+  UINT32  Value;
+  LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
+  do {
+    LibAmdPciRead (AccessWidth, PciAddress, &Value, StdHeader);
+  } while (TempData != (Value & TempMask));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get MMIO base address for PCI accesses
+ *
+ * @param[out] MmioAddress   PCI MMIO base address
+ * @param[out] MmioSize      Size of region in bytes
+ * @param[in]  StdHeader     Standard configuration header
+ *
+ * @retval    TRUE          MmioAddress/MmioSize are valid
+ */
+BOOLEAN
+STATIC
+GetPciMmioAddress (
+     OUT   UINT64            *MmioAddress,
+     OUT   UINT32            *MmioSize,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN MmioIsEnabled;
+  UINT32  EncodedSize;
+  UINT64  LocalMsrRegister;
+
+  ASSERT (StdHeader != NULL);
+
+  MmioIsEnabled = FALSE;
+  LibAmdMsrRead (MSR_MMIO_Cfg_Base, &LocalMsrRegister, StdHeader);
+  if ((LocalMsrRegister & BIT0) != 0) {
+    *MmioAddress = LocalMsrRegister & 0xFFFFFFFFFFF00000;
+    EncodedSize = (UINT32) ((LocalMsrRegister & 0x3C) >> 2);
+    *MmioSize = ((1 << EncodedSize) * 0x100000);
+    MmioIsEnabled = TRUE;
+  }
+  return MmioIsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Read field of PCI config register.
+ *
+ *
+ *
+ * @param[in]   Address       Pci address  (register must be DWORD aligned)
+ * @param[in]   Highbit       High bit position of the field in DWORD
+ * @param[in]   Lowbit        Low bit position of the field in DWORD
+ * @param[out]  Value         Pointer to data
+ * @param[in]   StdHeader     Standard configuration header
+ */
+VOID
+LibAmdPciReadBits (
+  IN       PCI_ADDR Address,
+  IN       UINT8 Highbit,
+  IN       UINT8 Lowbit,
+     OUT   UINT32 *Value,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  ASSERT (Highbit < 32 && Lowbit < 32 && Highbit >= Lowbit && (Address.AddressValue & 3) == 0);
+
+  LibAmdPciRead (AccessWidth32, Address, Value, StdHeader);
+  *Value >>= Lowbit;  // Shift
+
+  // A 1 << 32 == 1 << 0 due to x86 SHL instruction, so skip if that is the case
+
+  if ((Highbit - Lowbit) != 31) {
+    *Value &= (((UINT32) 1 << (Highbit - Lowbit + 1)) - 1);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Write field of PCI config register.
+ *
+ *
+ *
+ * @param[in]   Address       Pci address  (register must be DWORD aligned)
+ * @param[in]   Highbit       High bit position of the field in DWORD
+ * @param[in]   Lowbit        Low bit position of the field in DWORD
+ * @param[in]   Value         Pointer to data
+ * @param[in]   StdHeader     Standard configuration header
+ */
+VOID
+LibAmdPciWriteBits (
+  IN       PCI_ADDR Address,
+  IN       UINT8 Highbit,
+  IN       UINT8 Lowbit,
+  IN       UINT32 *Value,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 Temp;
+  UINT32 Mask;
+
+  ASSERT (Highbit < 32 && Lowbit < 32 && Highbit >= Lowbit && (Address.AddressValue & 3) == 0);
+
+  // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+
+  if ((Highbit - Lowbit) != 31) {
+    Mask = (((UINT32) 1 << (Highbit - Lowbit + 1)) - 1);
+  } else {
+    Mask = (UINT32) 0xFFFFFFFF;
+  }
+
+  LibAmdPciRead (AccessWidth32, Address, &Temp, StdHeader);
+  Temp &= ~(Mask << Lowbit);
+  Temp |= (*Value & Mask) << Lowbit;
+  LibAmdPciWrite (AccessWidth32, Address, &Temp, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Locate next capability pointer
+ *
+ *  Given a SBDFO this routine will find the next PCI capabilities list entry.
+ *  if the end of the list is reached, or if a problem is detected, then ILLEGAL_SBDFO is
+ *  returned.
+ *  To start a new search from the head of the list, specify a SBDFO with an offset of zero.
+ *
+ * @param[in,out] Address       Pci address
+ * @param[in]     StdHeader     Standard configuration header
+ */
+
+VOID
+LibAmdPciFindNextCap (
+  IN OUT   PCI_ADDR *Address,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  PCI_ADDR Base;
+  UINT32 Offset;
+  UINT32 Temp;
+  PCI_ADDR TempAddress;
+
+  ASSERT (Address != NULL);
+  ASSERT (*(UINT32 *) Address != ILLEGAL_SBDFO);
+
+  Base.AddressValue = Address->AddressValue;
+  Offset = Base.Address.Register;
+  Base.Address.Register = 0;
+
+  Address->AddressValue = (UINT32) ILLEGAL_SBDFO;
+
+  // Verify that the SBDFO points to a valid PCI device SANITY CHECK
+  LibAmdPciRead (AccessWidth32, Base, &Temp, StdHeader);
+  if (Temp == 0xFFFFFFFF) {
+    ASSERT (FALSE);
+    return; // There is no device at this address
+  }
+
+  // Verify that the device supports a capability list
+  TempAddress.AddressValue = Base.AddressValue + 0x04;
+  LibAmdPciReadBits (TempAddress, 20, 20, &Temp, StdHeader);
+  if (Temp == 0) {
+    return; // This PCI device does not support capability lists
+  }
+
+  if (Offset != 0) {
+    // If we are continuing on an existing list
+    TempAddress.AddressValue = Base.AddressValue + Offset;
+    LibAmdPciReadBits (TempAddress, 15, 8, &Temp, StdHeader);
+  } else {
+    // We are starting on a new list
+    TempAddress.AddressValue = Base.AddressValue + 0x34;
+    LibAmdPciReadBits (TempAddress, 7, 0, &Temp, StdHeader);
+  }
+
+  if (Temp == 0) {
+    return; // We have reached the end of the capabilities list
+  }
+
+  // Error detection and recovery- The statement below protects against
+  //   PCI devices with broken PCI capabilities lists.  Detect a pointer
+  //   that is not uint32 aligned, points into the first 64 reserved DWORDs
+  //   or points back to itself.
+  if (((Temp & 3) != 0) || (Temp == Offset) || (Temp < 0x40)) {
+    ASSERT (FALSE);
+    return;
+  }
+
+  Address->AddressValue = Base.AddressValue + Temp;
+  return;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set memory with value
+ *
+ *
+ * @param[in,out] Destination   Pointer to memory range
+ * @param[in]     Value         Value to set memory with
+ * @param[in]     FillLength    Size of the memory range
+ * @param[in]     StdHeader     Standard configuration header (Optional)
+ */
+VOID
+LibAmdMemFill (
+  IN       VOID *Destination,
+  IN       UINT8 Value,
+  IN       UINTN FillLength,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 *Dest;
+  ASSERT (StdHeader != NULL);
+  Dest = Destination;
+  while ((FillLength--) != 0) {
+    *Dest++ = Value;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Copy memory
+ *
+ *
+ * @param[in,out] Destination   Pointer to destination buffer
+ * @param[in]     Source        Pointer to source buffer
+ * @param[in]     CopyLength    buffer length
+ * @param[in]     StdHeader     Standard configuration header (Optional)
+ */
+VOID
+LibAmdMemCopy (
+  IN       VOID *Destination,
+  IN       VOID *Source,
+  IN       UINTN CopyLength,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 *Dest;
+  UINT8 *SourcePtr;
+  ASSERT (StdHeader != NULL);
+  Dest = Destination;
+  SourcePtr = Source;
+  while ((CopyLength--) != 0) {
+    *Dest++ = *SourcePtr++;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Verify checksum of binary image (B1/B2/B3)
+ *
+ *
+ * @param[in]   ImagePtr      Pointer to image  start
+ * @retval      TRUE          Checksum valid
+ * @retval      FALSE         Checksum invalid
+ */
+BOOLEAN
+LibAmdVerifyImageChecksum (
+  IN       VOID *ImagePtr
+  )
+{
+  // Assume ImagePtr points to the binary start ($AMD)
+  // Checksum is on an even boundary in AMD_IMAGE_HEADER
+
+  UINT16 Sum;
+  UINT32 i;
+
+  Sum = 0;
+
+  i = ((AMD_IMAGE_HEADER*) ImagePtr)->ImageSize;
+
+  while (i > 1) {
+    Sum = Sum + *((UINT16 *)ImagePtr);
+    ImagePtr = (VOID *) ((UINT8 *)ImagePtr + 2);
+    i = i - 2;
+  }
+  if (i > 0) {
+    Sum = Sum + *((UINT8 *) ImagePtr);
+  }
+
+  return (Sum == 0)?TRUE:FALSE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Locate AMD binary image that contain specific module
+ *
+ *
+ * @param[in]   StartAddress    Pointer to start range
+ * @param[in]   EndAddress      Pointer to end range
+ * @param[in]   Alignment       Image address alignment
+ * @param[in]   ModuleSignature Module signature.
+ * @retval     NULL  if image not found
+ * @retval     pointer to image header
+ */
+VOID *
+LibAmdLocateImage (
+  IN       VOID *StartAddress,
+  IN       VOID *EndAddress,
+  IN       UINT32 Alignment,
+  IN       CHAR8 ModuleSignature[8]
+  )
+
+{
+  UINT8 *CurrentPtr;
+  AMD_MODULE_HEADER *ModuleHeaderPtr;
+  UINT64 *SearchStr;
+  UINT64 *InputStr;
+
+  CurrentPtr = StartAddress;
+  InputStr = (UINT64 *)ModuleSignature;
+
+  // Search from start to end incrementing by alignment
+  while ((CurrentPtr >= (UINT8 *) StartAddress) && (CurrentPtr < (UINT8 *) EndAddress)) {
+    // First find a binary image
+    if (*((UINT32 *) CurrentPtr) == IMAGE_SIGNATURE) {
+      if (LibAmdVerifyImageChecksum (CurrentPtr)) {
+        // If we have a valid image, search module linked list for a match
+        ModuleHeaderPtr = (AMD_MODULE_HEADER*) ((UINT8 *)CurrentPtr + ((AMD_IMAGE_HEADER *) CurrentPtr)->ModuleInfoOffset);
+        while (ModuleHeaderPtr != NULL) {
+          SearchStr = (UINT64 *)&ModuleHeaderPtr->ModuleIdentifier;
+          if (*InputStr == *SearchStr) {
+            return  CurrentPtr;
+          }
+          ModuleHeaderPtr = (AMD_MODULE_HEADER *)ModuleHeaderPtr->NextBlock;
+        }
+      }
+    }
+    CurrentPtr += Alignment;
+  }
+  return NULL;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the package type mask for the processor
+ *
+ *
+ * @param[in]     StdHeader     Standard configuration header (Optional)
+ */
+
+//  Returns the package type mask for the processor
+UINT32
+LibAmdGetPackageType (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32      ProcessorPackageType;
+  CPUID_DATA  CpuId;
+
+  LibAmdCpuidRead (0x80000001, &CpuId, StdHeader);
+  ProcessorPackageType = (UINT32) (CpuId.EBX_Reg >> 28) & 0xF; // bit 31:28
+  return (UINT32) (1 << ProcessorPackageType);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the package type mask for the processor
+ *
+ *
+ * @param[in]     AccessWidth     Access width
+ * @param[in]     Data            data
+ * @param[in]     DataMask        data
+ * @param[out]    TemData         typecast data
+ * @param[out]    TempDataMask    typecast data
+ */
+
+
+VOID
+STATIC
+LibAmdGetDataFromPtr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       VOID         *Data,
+  IN       VOID         *DataMask,
+     OUT   UINT32       *TemData,
+     OUT   UINT32       *TempDataMask
+  )
+{
+  switch (AccessWidth) {
+  case AccessWidth8:
+  case AccessS3SaveWidth8:
+    *TemData = (UINT32)*(UINT8 *) Data;
+    *TempDataMask = (UINT32)*(UINT8 *) DataMask;
+    break;
+  case AccessWidth16:
+  case AccessS3SaveWidth16:
+    *TemData = (UINT32)*(UINT16 *) Data;
+    *TempDataMask = (UINT32)*(UINT16 *) DataMask;
+    break;
+  case AccessWidth32:
+  case AccessS3SaveWidth32:
+    *TemData = *(UINT32 *) Data;
+    *TempDataMask = *(UINT32 *) DataMask;
+    break;
+  default:
+    IDS_ERROR_TRAP;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the package type mask for the processor
+ *
+ *
+ * @param[in]     AccessWidth     Access width
+ * @retval        Width in number of bytes
+ */
+
+
+UINT8
+LibAmdAccessWidth (
+  IN       ACCESS_WIDTH AccessWidth
+  )
+{
+  UINT8 Width;
+
+  switch (AccessWidth) {
+  case AccessWidth8:
+  case AccessS3SaveWidth8:
+    Width = 1;
+    break;
+  case AccessWidth16:
+  case AccessS3SaveWidth16:
+    Width = 2;
+    break;
+  case AccessWidth32:
+  case AccessS3SaveWidth32:
+    Width = 4;
+    break;
+  case AccessWidth64:
+  case AccessS3SaveWidth64:
+    Width = 8;
+    break;
+  default:
+    Width = 0;
+    IDS_ERROR_TRAP;
+  }
+  return Width;
+}
+VOID
+CpuidRead (
+  IN        UINT32      CpuidFcnAddress,
+  OUT       CPUID_DATA  *Value
+  )
+{
+  __cpuid ((int *)Value, CpuidFcnAddress);
+}
+UINT8
+ReadNumberOfCpuCores(
+  VOID
+  )
+{
+  CPUID_DATA  Value;
+  CpuidRead (0x80000008, &Value);
+  return   Value.ECX_Reg & 0xff;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Lib/amdlib.h b/src/vendorcode/amd/agesa/f15/Lib/amdlib.h
new file mode 100644
index 0000000000..a9a722fa2b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Lib/amdlib.h
@@ -0,0 +1,403 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Library
+ *
+ * Contains interface to the AMD AGESA library
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Lib
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ **/
+
+#ifndef _AMD_LIB_H_
+#define _AMD_LIB_H_
+
+#define IOCF8 0xCF8
+#define IOCFC 0xCFC
+
+// Reg Values for ReadCpuReg and WriteCpuReg
+#define    CR4_REG  0x04
+#define    DR0_REG  0x10
+#define    DR1_REG  0x11
+#define    DR2_REG  0x12
+#define    DR3_REG  0x13
+#define    DR7_REG  0x17
+
+// PROTOTYPES FOR amdlib32.asm
+UINT8
+ReadIo8 (
+  IN       UINT16 Address
+  );
+
+UINT16
+ReadIo16 (
+  IN       UINT16 Address
+  );
+
+UINT32
+ReadIo32 (
+  IN       UINT16 Address
+  );
+
+VOID
+WriteIo8 (
+  IN       UINT16 Address,
+  IN       UINT8 Data
+  );
+
+VOID
+WriteIo16 (
+  IN       UINT16 Address,
+  IN       UINT16 Data
+  );
+
+VOID
+WriteIo32 (
+  IN       UINT16 Address,
+  IN       UINT32 Data
+  );
+
+UINT8
+Read64Mem8 (
+  IN       UINT64 Address
+  );
+
+UINT16
+Read64Mem16 (
+  IN       UINT64 Address
+  );
+
+UINT32
+Read64Mem32 (
+  IN       UINT64 Address
+  );
+
+VOID
+Write64Mem8 (
+  IN       UINT64 Address,
+  IN       UINT8 Data
+  );
+
+VOID
+Write64Mem16 (
+  IN       UINT64 Address,
+  IN       UINT16 Data
+  );
+
+VOID
+Write64Mem32 (
+  IN       UINT64 Address,
+  IN       UINT32 Data
+  );
+
+UINT64
+ReadTSC (
+  VOID
+  );
+
+// MSR
+
+UINT64
+MsrRead (
+  IN       UINT32 MsrAddress
+  );
+
+VOID
+MsrWrite (
+  IN       UINT32 MsrAddress,
+  IN			 UINT64 Value
+  );
+
+VOID
+LibAmdMsrRead (
+  IN       UINT32 MsrAddress,
+     OUT   UINT64 *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdMsrWrite (
+  IN       UINT32 MsrAddress,
+  IN       UINT64 *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+// IO
+VOID
+LibAmdIoRead (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT16 IoAddress,
+     OUT   VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdIoWrite (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT16 IoAddress,
+  IN       VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdIoRMW (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT16 IoAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdIoPoll (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT16 IoAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN       UINT64 Delay,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+// Memory or MMIO
+VOID
+LibAmdMemRead (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT64 MemAddress,
+     OUT   VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdMemWrite (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT64 MemAddress,
+  IN       VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdMemRMW (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT64 MemAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdMemPoll (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       UINT64 MemAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN       UINT64 Delay,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+// PCI
+VOID
+LibAmdPciRead (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR PciAddress,
+     OUT   VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdPciWrite (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR PciAddress,
+  IN       VOID *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdPciRMW (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR PciAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdPciPoll (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR PciAddress,
+  IN       VOID *Data,
+  IN       VOID *DataMask,
+  IN       UINT64 Delay,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdPciReadBits (
+  IN       PCI_ADDR Address,
+  IN       UINT8 Highbit,
+  IN       UINT8 Lowbit,
+     OUT   UINT32 *Value,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdPciWriteBits (
+  IN       PCI_ADDR Address,
+  IN       UINT8 Highbit,
+  IN       UINT8 Lowbit,
+  IN       UINT32 *Value,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdPciFindNextCap (
+  IN OUT   PCI_ADDR *Address,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+// CPUID
+VOID
+LibAmdCpuidRead (
+  IN       UINT32 CpuidFcnAddress,
+     OUT   CPUID_DATA *Value,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+// Utility Functions
+VOID
+LibAmdMemFill (
+  IN       VOID *Destination,
+  IN       UINT8 Value,
+  IN       UINTN FillLength,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LibAmdMemCopy (
+  IN       VOID *Destination,
+  IN       VOID *Source,
+  IN       UINTN CopyLength,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID *
+LibAmdLocateImage (
+  IN       VOID *StartAddress,
+  IN       VOID *EndAddress,
+  IN       UINT32 Alignment,
+  IN       CHAR8 ModuleSignature[8]
+  );
+
+UINT32
+LibAmdGetPackageType (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+LibAmdVerifyImageChecksum (
+  IN       VOID *ImagePtr
+  );
+
+UINT8
+LibAmdBitScanReverse (
+  IN       UINT32 value
+  );
+UINT8
+LibAmdBitScanForward (
+  IN       UINT32 value
+  );
+
+VOID
+LibAmdReadCpuReg (
+  IN       UINT8 RegNum,
+     OUT   UINT32 *Value
+  );
+VOID
+LibAmdWriteCpuReg (
+  IN       UINT8 RegNum,
+  IN       UINT32 Value
+  );
+
+VOID
+LibAmdWriteBackInvalidateCache (
+  IN       VOID
+  );
+
+VOID
+LibAmdSimNowEnterDebugger (VOID);
+
+VOID
+LibAmdHDTBreakPoint (VOID);
+
+UINT8
+LibAmdAccessWidth (
+  IN       ACCESS_WIDTH AccessWidth
+  );
+
+VOID
+LibAmdCLFlush (
+  IN       UINT64 Address,
+  IN       UINT8  Count
+  );
+
+VOID F10RevDProbeFilterCritical (
+  IN       PCI_ADDR PciAddress,
+  IN       UINT32   PciRegister
+  );
+VOID
+IdsOutPort (
+  IN       UINT32 Addr,
+  IN       UINT32 Value,
+  IN       UINT32 Flag
+  );
+
+VOID
+StopHere (
+  VOID
+  );
+
+VOID
+CpuidRead (
+  IN        UINT32      CpuidFcnAddress,
+  OUT       CPUID_DATA  *Value
+  );
+
+UINT8
+ReadNumberOfCpuCores(
+  VOID
+  );
+
+#endif // _AMD_LIB_H_
diff --git a/src/vendorcode/amd/agesa/f15/Lib/helper.c b/src/vendorcode/amd/agesa/f15/Lib/helper.c
new file mode 100644
index 0000000000..8c9e1d4edc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Lib/helper.c
@@ -0,0 +1,68 @@
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+// helper.c - these functions are compiled separately because they redefine
+//            functions invoked directly by the compiler code generator.
+//            The Microsoft tools do not allow such functions to be compiled
+//            with the "Enable link-time code generation (/GL)" option. Compile
+//            this module without /GL to avoid a build failure LNK1237.
+//
+
+#if defined (_MSC_VER)
+
+#include "Porting.h"
+
+//---------------------------------------------------------------------------
+void *memcpy (void *dest, const void *src, size_t bytes)
+   {
+   // Rep movsb is faster than a byte loop, but still quite slow
+   // for large operations. However, it is a good choice here because
+   // this function is intended for use by the compiler only. For
+   // large copy operations, call LibAmdMemCopy.
+   __movsb (dest, src, bytes);
+   return dest;
+   }
+
+//---------------------------------------------------------------------------
+
+void *memset (void *dest, int value, size_t bytes)
+   {
+   // Rep stosb is faster than a byte loop, but still quite slow
+   // for large operations. However, it is a good choice here because
+   // this function is intended for use by the compiler only. For
+   // large fill operations, call LibAmdMemFill.
+   __stosb (dest, value, bytes);
+   return dest;
+   }
+//---------------------------------------------------------------------------
+
+#endif
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Lib/x64/amdlib64.asm b/src/vendorcode/amd/agesa/f15/Lib/x64/amdlib64.asm
new file mode 100644
index 0000000000..8ec78d11da
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Lib/x64/amdlib64.asm
@@ -0,0 +1,591 @@
+;/**
+; * @file
+; *
+; * Agesa library 64bit
+; *
+; * Contains AMD AGESA Library
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  Lib
+; * @e \$Revision: 17071 $   @e \$Date: 2009-07-30 10:13:11 -0700 (Thu, 30 Jul 2009) $
+; */
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+
+.code
+;/*++
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write IO byte
+; *
+; *  @param[in]   CX    IO port address
+; *  @param[in]   DL    IO port Value
+; */
+
+PUBLIC  WriteIo8
+WriteIo8        PROC
+        mov     al, dl
+        mov     dx, cx
+        out     dx, al
+        ret
+WriteIo8        ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write IO word
+; *
+; *  @param[in]   CX      IO port address
+; *  @param[in]   DX      IO port Value
+; */
+PUBLIC  WriteIo16
+WriteIo16       PROC
+        mov     ax, dx
+        mov     dx, cx
+        out     dx, ax
+        ret
+WriteIo16       ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write IO dword
+; *
+; *  @param[in]   CX      IO port address
+; *  @param[in]   EDX     IO port Value
+; */
+
+PUBLIC WriteIo32
+WriteIo32       PROC
+        mov     eax, edx
+        mov     dx, cx
+        out     dx, eax
+        ret
+WriteIo32       ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read IO byte
+; *
+; *  @param[in] CX  IO port address
+; *  @retval    AL  IO port Value
+; */
+PUBLIC ReadIo8
+ReadIo8 PROC
+        mov     dx, cx
+        in      al, dx
+        ret
+ReadIo8 ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read IO word
+; *
+; *  @param[in]   CX  IO port address
+; *  @retval      AX  IO port Value
+; */
+PUBLIC ReadIo16
+ReadIo16        PROC
+        mov     dx, cx
+        in      ax, dx
+        ret
+ReadIo16        ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read IO dword
+; *
+; *  @param[in]   CX  IO port address
+; *  @retval      EAX IO port Value
+; */
+PUBLIC ReadIo32
+ReadIo32        PROC
+        mov     dx, cx
+        in      eax, dx
+        ret
+ReadIo32        ENDP
+
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read MSR
+; *
+; *  @param[in]  RCX      MSR Address
+; *  @param[in]  RDX      Pointer to data
+; *  @param[in]  R8D      ConfigPtr (Optional)
+; */
+PUBLIC LibAmdMsrRead
+LibAmdMsrRead  PROC
+    push rsi
+    mov     rsi, rdx
+    rdmsr
+    mov     [rsi], eax
+    mov     [rsi+4], edx
+    pop rsi
+    ret
+LibAmdMsrRead  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write MSR
+; *
+; *  @param[in]  RCX        MSR Address
+; *  @param[in]  RDX        Pointer to data
+; *  @param[in]  R8D        ConfigPtr  (Optional)
+; */
+PUBLIC LibAmdMsrWrite
+LibAmdMsrWrite                PROC
+    push rsi
+    mov rsi, rdx
+    mov eax, [rsi]
+    and rax, 0ffffffffh
+    mov edx, [rsi+4]
+    and rdx, 0ffffffffh
+    wrmsr
+    pop rsi
+    ret
+LibAmdMsrWrite                ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read CPUID
+; *
+; *  @param[in]  RCX    CPUID function
+; *  @param[in]  RDX    Pointer to CPUID_DATA to save cpuid data
+; *  @param[in]  R8D    ConfigPtr (Optional)
+; */
+PUBLIC LibAmdCpuidRead
+LibAmdCpuidRead       PROC
+
+    push rbx
+    push rsi
+    mov  rsi, rdx
+    mov  rax, rcx
+    cpuid
+    mov [rsi],   eax
+    mov [rsi+4], ebx
+    mov [rsi+8], ecx
+    mov [rsi+12],edx
+    pop rsi
+    pop rbx
+    ret
+
+LibAmdCpuidRead              ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read TSC
+; *
+; *
+; * @retval     RAX Time stamp counter value
+; */
+
+PUBLIC ReadTSC
+ReadTSC  PROC
+    rdtsc
+    and  rax, 0ffffffffh
+    shl  rdx, 32
+    or   rax, rdx
+    ret
+ReadTSC  ENDP
+
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read memory/MMIO byte
+; *
+; * @param[in]  RCX - Memory Address
+; * @retval     Memory byte at given address
+; */
+PUBLIC  Read64Mem8
+Read64Mem8  PROC
+
+     xor  rax, rax
+     mov  al, [rcx]
+     ret
+
+Read64Mem8  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read memory/MMIO word
+; *
+; * @param[in]  RCX - Memory Address
+; * @retval     Memory word at given address
+; */
+PUBLIC  Read64Mem16
+Read64Mem16  PROC
+
+        xor     rax, rax
+        mov     ax, [rcx]
+        ret
+
+Read64Mem16  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read memory/MMIO dword
+; *
+; * @param[in]  RCX - Memory Address
+; * @retval     Memory dword at given address
+; */
+PUBLIC  Read64Mem32
+Read64Mem32  PROC
+
+        xor     rax, rax
+        mov     eax, [rcx]
+        ret
+
+Read64Mem32  ENDP
+
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write memory/MMIO byte
+; *
+; * @param[in]  RCX   Memory Address
+; * @param[in]  DL    Value to write
+; */
+
+PUBLIC  Write64Mem8
+Write64Mem8  PROC
+
+        xor     rax, rax
+        mov     rax, rdx
+        mov     [rcx], al
+        ret
+
+Write64Mem8  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write memory/MMIO word
+; *
+; * @param[in]  RCX   Memory Address
+; * @param[in]  DX    Value to write
+; */
+PUBLIC  Write64Mem16
+Write64Mem16  PROC
+
+        xor     rax, rax
+        mov     rax, rdx
+        mov     [rcx], ax
+        ret
+
+Write64Mem16  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write memory/MMIO dword
+; *
+; * @param[in]  RCX   Memory Address
+; * @param[in]  EDX   Value to write
+; */
+PUBLIC  Write64Mem32
+Write64Mem32  PROC
+
+        xor     rax, rax
+        mov     rax, rdx
+        mov     [rcx], eax
+        ret
+
+Write64Mem32  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Read various CPU registers
+; *
+; * @param[in]  CL     Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7)
+; * @param[in]  RDX    Pointer to value
+; */
+
+PUBLIC  LibAmdReadCpuReg
+LibAmdReadCpuReg PROC
+
+        push    rax
+        xor     rax, rax
+Reg00h:
+        cmp     cl, 00h
+        jne     Reg04h
+        mov     rax, cr0
+        jmp     RegRead
+Reg04h:
+        cmp     cl, 04h
+        jne     Reg10h
+        mov     rax, cr4
+        jmp     RegRead
+Reg10h:
+        cmp     cl, 10h
+        jne     Reg11h
+        mov     rax, dr0
+        jmp     RegRead
+Reg11h:
+        cmp     cl, 11h
+        jne     Reg12h
+        mov     rax, dr1
+        jmp     RegRead
+Reg12h:
+        cmp     cl, 12h
+        jne     Reg13h
+        mov     rax, dr2
+        jmp     RegRead
+Reg13h:
+        cmp     cl, 13h
+        jne     Reg17h
+        mov     rax, dr3
+        jmp     RegRead
+Reg17h:
+        cmp     cl, 17h
+        jne     RegRead
+        mov     rax, dr7
+RegRead:
+        mov     [rdx], eax
+        pop     rax
+        ret
+LibAmdReadCpuReg ENDP
+
+
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write various CPU registers
+; *
+; * @param[in]  CL    Register ID (0/4 - CR0/CR4, 10h/11h/12h/13h/17h - DR0/DR1/DR2/DR3/DR7)
+; * @param[in]  RDX   Value to write
+; */
+
+PUBLIC  LibAmdWriteCpuReg
+LibAmdWriteCpuReg PROC
+
+        push    rax
+Reg00h:
+        cmp     cl, 00h
+        jne     Reg04h
+        mov     rax, cr0
+        mov     eax, edx
+        mov     cr0, rax
+        jmp     Done
+Reg04h:
+        cmp     cl, 04h
+        jne     Reg10h
+        mov     rax, cr4
+        mov     eax, edx
+        mov     cr4, rax
+        jmp     Done
+Reg10h:
+        cmp     cl, 10h
+        jne     Reg11h
+        mov     rax, dr0
+        mov     eax, edx
+        mov     dr0, rax
+        jmp     Done
+Reg11h:
+        cmp     cl, 11h
+        jne     Reg12h
+        mov     rax, dr1
+        mov     eax, edx
+        mov     dr1, rax
+        jmp     Done
+Reg12h:
+        cmp     cl, 12h
+        jne     Reg13h
+        mov     rax, dr2
+        mov     eax, edx
+        mov     dr2, rax
+        jmp     Done
+Reg13h:
+        cmp     cl, 13h
+        jne     Reg17h
+        mov     rax, dr3
+        mov     eax, edx
+        mov     dr3, rax
+        jmp     Done
+Reg17h:
+        cmp     cl, 17h
+        jne     Done
+        mov     rax, dr7
+        mov     eax, edx
+        mov     dr7, rax
+Done:
+        pop     rax
+        ret
+LibAmdWriteCpuReg ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Write back invalidate caches using wbinvd.
+; *
+; *
+; *
+; */
+
+PUBLIC LibAmdWriteBackInvalidateCache
+LibAmdWriteBackInvalidateCache PROC
+    wbinvd
+    ret
+LibAmdWriteBackInvalidateCache ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Stop CPU
+; *
+; *
+; *
+; */
+
+PUBLIC StopHere
+StopHere PROC
+@@:
+    jmp short @b
+StopHere ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Enter debugger on SimNow
+; *
+; *
+; *
+; */
+PUBLIC LibAmdSimNowEnterDebugger
+LibAmdSimNowEnterDebugger PROC
+    pushfq
+    mov     rax, 0BACCD00Bh         ; Backdoor in SimNow
+    mov     rbx, 2                  ; Select breakpoint feature
+    cpuid
+@@:
+    jmp short @b
+    popfq
+    ret
+LibAmdSimNowEnterDebugger ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  IDS IO port write
+; *
+; * @param[in]  ECX     IO Port Address
+; * @param[in]  EDX     Value to write
+; * @param[in]  R8D     IDS flags
+; *
+; */
+
+PUBLIC IdsOutPort
+IdsOutPort PROC
+    push rbx
+    push rax
+
+    mov ebx, r8d
+    mov eax, edx
+    mov edx, ecx
+    out dx, eax
+
+    pop rax
+    pop rbx
+    ret
+IdsOutPort  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Force breakpoint on HDT
+; *
+; *
+; */
+PUBLIC LibAmdHDTBreakPoint
+LibAmdHDTBreakPoint PROC
+
+    push rbx
+
+    mov rcx, 0C001100Ah             ;bit 0 = HDT redirect
+    mov rdi, 09C5A203Ah             ;Password
+    rdmsr
+    and rax, 0ffffffffh
+    or rax, 1
+
+    wrmsr
+
+    mov rax, 0B2h                  ;Marker = B2
+    db 0F1h                        ;ICEBP
+
+    pop rbx
+    ret
+
+LibAmdHDTBreakPoint ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Find the most right hand side non-zero bit with
+; *
+; * @param[in]  ECX       Value
+; */
+PUBLIC LibAmdBitScanForward
+LibAmdBitScanForward PROC
+    bsf eax, ecx
+    jnz nonZeroSource
+    mov al,32
+nonZeroSource:
+    ret
+LibAmdBitScanForward  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Find the most left hand side non-zero bit.
+; *
+; * @param[in]  ECX       Value
+; */
+PUBLIC LibAmdBitScanReverse
+LibAmdBitScanReverse PROC
+    bsr eax, ecx
+    jnz nonZeroSource
+    mov al,0FFh
+nonZeroSource:
+    ret
+LibAmdBitScanReverse  ENDP
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; *  Flush specified number of cache line
+; *
+; *  @param[in]  RCX      Physical address to be flushed
+; *  @param[in]  DL       number of cachelines to be flushed
+; */
+PUBLIC LibAmdCLFlush
+LibAmdCLFlush  PROC
+    push rax
+    mov rax, rcx
+    movzx rcx, dl
+    @@:
+    mfence
+    clflush [rax]
+    mfence
+    add rax,64
+    loop @B
+    pop rax
+    ret
+LibAmdCLFlush  ENDP
+
+END
diff --git a/src/vendorcode/amd/agesa/f15/MainPage.h b/src/vendorcode/amd/agesa/f15/MainPage.h
new file mode 100644
index 0000000000..1e61de5b9d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/MainPage.h
@@ -0,0 +1,120 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Create outline and references for mainpage documentation.
+ *
+ * Design guides, maintenance guides, and general documentation, are
+ * collected using this file onto the documentation mainpage.
+ * This file contains doxygen comment blocks, only.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Documentation
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/**
+ * @mainpage
+ *
+ * The design and maintenance documentation for AGESA Sample Code is organized as
+ * follows.  On this page, you can reference design guides, maintenance guides, and
+ * general documentation.  Detailed Data Structure, Function, and Interface documentation
+ * may be found using the Data Structures or Files tabs.  See Related Pages for a
+ * Release content summary, and, if this is not a production release, lists of To Do's,
+ * Deprecated items, etc.
+ *
+ * @subpage starthere "Start Here - Initial Porting and Integration."
+ *
+ * @subpage optionmain "Build Configuration and Options Guides and Documentation."
+ *
+ * @subpage commonmain "Processor Common Component Guides and Documentation."
+ *
+ * @subpage cpumain "CPU Component Guides and Documentation."
+ *
+ * @subpage htmain "HT Component Guides and Documentation."
+ *
+ * @subpage memmain "MEM Component Guides and Documentation."
+ *
+ * @subpage gnbmain "GNB Component Documentation."
+ *
+ * @subpage idsmain "IDS Component Guides and Documentation."
+ *
+ * @subpage recoverymain "Recovery Component Guides and Documentation."
+ *
+ */
+
+/**
+ * @page starthere Initial Porting and Integration
+ *
+ * @par Basic Check List
+ *
+ * <ul>
+ * <li> Copy the \<plat\>Options.c file from the Addendum directory to the platform tip build directory.
+ * AMD recommends the use of a sub-directory named AGESA to contain these files and the build output files.
+ * <li> Copy the OptionsIds.h content in the spec to OptionsIds.h in the platform build tip directory
+ * and make changes to enable the IDS support desired. It is highly recommended to set the following for
+ * initial integration and development:@n
+ * @code
+ * #define IDSOPT_IDS_ENABLED TRUE
+ * #define IDSOPT_ERROR_TRAP_ENABLED TRUE
+ * #define IDSOPT_ASSERT_ENABLED TRUE
+ * @endcode
+ * <li> Edit and modify the option selections in those two files to meet the needs of the specific platform.
+ * <li> Set the environment variable AGESA_ROOT to the root folder of the AGESA code.
+ * <li> Set the environment variable AGESA_OptsDir the platform build tip AGESA directory.
+ * <li> Generate the doxygen documentation or locate the file arch2008.chm within your AGESA release package.
+ * </ul>
+ *
+ * @par Debugging Using ASSERT and IDS_ERROR_TRAP
+ *
+ * While AGESA code uses ::ASSERT and ::IDS_ERROR_TRAP to check for internal errors, these macros can also
+ * catch and assist debug of wrapper and platform BIOS issues.
+ *
+ * When an ::ASSERT fails or an ::IDS_ERROR_TRAP is executed, the AGESA code will enter a halt loop and display a
+ * Stop Code.  A Stop Code is eight hex digits.  The first (most significant) four are the FILECODE.
+ * FILECODEs can be looked up in Filecode.h to determine which file contains the stop macro.  Each file has a
+ * unique code value.
+ * The least significant digits are the line number in that file.
+ * For example, 0210 means the macro is on line two hundred ten.
+ * (see ::IdsErrorStop for more details on stop code display.)
+ *
+ * Enabling ::ASSERT and ::IDS_ERROR_TRAP ensure errors are caught and also provide a useful debug assist.
+ * Comments near each macro use will describe the nature of the error and typical wrapper errors or other
+ * root causes.
+ *
+ * After your wrapper consistently executes ::ASSERT and ::IDS_ERROR_TRAP stop free, you can disable them in
+ * OptionsIds.h, except for regression testing.  IDS is not expected to be enabled in production BIOS builds.
+ *
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Makefile.inc b/src/vendorcode/amd/agesa/f15/Makefile.inc
new file mode 100644
index 0000000000..1f3ba5179c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Makefile.inc
@@ -0,0 +1,532 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+## ABSOLUTE AGESA V5 ROOT PATH ##
+AGESA_ROOT ?= $(PWD)
+
+AGESA_INC ?= -I$(src)/mainboard/$(MAINBOARDDIR)
+AGESA_INC += -I$(AGESA_ROOT)
+AGESA_INC += -I$(AGESA_ROOT)/Include
+AGESA_INC += -I$(AGESA_ROOT)/Lib
+AGESA_INC += -I$(AGESA_ROOT)/Legacy
+AGESA_INC += -I$(AGESA_ROOT)/Proc/CPU
+AGESA_INC += -I$(AGESA_ROOT)/Proc/CPU/Family
+AGESA_INC += -I$(AGESA_ROOT)/Proc/CPU/Family/0x10
+AGESA_INC += -I$(AGESA_ROOT)/Proc/CPU/Family/0x15
+AGESA_INC += -I$(AGESA_ROOT)/Proc/CPU/Family/0x15/OR
+AGESA_INC += -I$(AGESA_ROOT)/Proc/CPU/Feature
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Common
+AGESA_INC += -I$(AGESA_ROOT)/Proc/HT
+AGESA_INC += -I$(AGESA_ROOT)/Proc/HT/Fam10
+AGESA_INC += -I$(AGESA_ROOT)/Proc/HT/Fam15
+AGESA_INC += -I$(AGESA_ROOT)/Proc/HT/Fam15Mod1x
+AGESA_INC += -I$(AGESA_ROOT)/Proc/HT/Features
+AGESA_INC += -I$(AGESA_ROOT)/Proc/HT/NbCommon
+AGESA_INC += -I$(AGESA_ROOT)/Proc/HT/htGraph
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Control
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Debug/
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Internal
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Family
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Family/0x10
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Family/0x10/HY
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Family/0x15
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Family/0x15/OR
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Internal/Family/
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Internal/Family/0x10
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Internal/Family/0x15/
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Internal/Family/0x15/OR/
+
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/NB
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/NB/OR
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/NB/C32
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/NB/HY
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/NB/DA
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/NB/PH
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/NB/RB
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/Feat/IDENDIMM/
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/Main
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Recovery/CPU
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Recovery/Mem
+
+
+
+agesa_lib_src  += ./Legacy/Proc/agesaCallouts.c
+agesa_lib_src  += ./Legacy/Proc/Dispatcher.c
+agesa_lib_src  += ./Legacy/Proc/hobTransfer.c
+agesa_lib_src  += ./Lib/amdlib.c
+agesa_lib_src  += ./Lib/helper.c
+agesa_lib_src  += ./Proc/Common/AmdInitEarly.c
+agesa_lib_src  += ./Proc/Common/AmdInitEnv.c
+agesa_lib_src  += ./Proc/Common/AmdInitLate.c
+agesa_lib_src  += ./Proc/Common/AmdInitMid.c
+agesa_lib_src  += ./Proc/Common/AmdInitPost.c
+agesa_lib_src  += ./Proc/Common/AmdInitReset.c
+agesa_lib_src  += ./Proc/Common/AmdInitResume.c
+agesa_lib_src  += ./Proc/Common/AmdLateRunApTask.c
+agesa_lib_src  += ./Proc/Common/AmdS3LateRestore.c
+agesa_lib_src  += ./Proc/Common/AmdS3Save.c
+agesa_lib_src  += ./Proc/Common/CommonInits.c
+agesa_lib_src  += ./Proc/Common/CommonReturns.c
+agesa_lib_src  += ./Proc/Common/CreateStruct.c
+agesa_lib_src  += ./Proc/Common/S3RestoreState.c
+agesa_lib_src  += ./Proc/Common/S3SaveState.c
+agesa_lib_src  += ./Proc/CPU/cahalt.c
+agesa_lib_src  += ./Proc/CPU/cpuApicUtilities.c
+agesa_lib_src  += ./Proc/CPU/cpuBist.c
+agesa_lib_src  += ./Proc/CPU/cpuBrandId.c
+agesa_lib_src  += ./Proc/CPU/cpuEarlyInit.c
+agesa_lib_src  += ./Proc/CPU/cpuEventLog.c
+agesa_lib_src  += ./Proc/CPU/cpuFamilyTranslation.c
+agesa_lib_src  += ./Proc/CPU/cpuGeneralServices.c
+agesa_lib_src  += ./Proc/CPU/cpuInitEarlyTable.c
+agesa_lib_src  += ./Proc/CPU/cpuLateInit.c
+agesa_lib_src  += ./Proc/CPU/cpuMicrocodePatch.c
+agesa_lib_src  += ./Proc/CPU/cpuPostInit.c
+agesa_lib_src  += ./Proc/CPU/cpuPowerMgmt.c
+agesa_lib_src  += ./Proc/CPU/cpuPowerMgmtMultiSocket.c
+agesa_lib_src  += ./Proc/CPU/cpuPowerMgmtSingleSocket.c
+agesa_lib_src  += ./Proc/CPU/cpuWarmReset.c
+agesa_lib_src  += ./Proc/CPU/heapManager.c
+agesa_lib_src  += ./Proc/CPU/S3.c
+agesa_lib_src  += ./Proc/CPU/Table.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuCommonF10Utilities.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10BrandId.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10BrandIdAm3.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10BrandIdAsb2.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10BrandIdC32.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10BrandIdFr1207.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10BrandIdG34.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10BrandIdS1g3.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10BrandIdS1g4.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10CacheDefaults.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10CacheFlushOnHalt.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10Cpb.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10Dmi.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10EarlyInit.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10FeatureLeveling.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10HtPhyTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10MsrTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10PciTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10PowerCheck.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10PowerMgmtSystemTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10PowerPlane.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10Pstate.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10SoftwareThermal.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10Utilities.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10WheaInitDataTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/cpuF10WorkaroundsTable.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/F10InitEarlyTable.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/F10IoCstate.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/F10MultiLinkPciTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/F10PmAsymBoostInit.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/F10PmNbCofVidInit.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/F10PmNbPstateInit.c
+agesa_lib_src  += ./Proc/CPU/Family/0x10/F10SingleLinkPciTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/cpuCommonF15Utilities.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/cpuF15Apm.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/cpuF15BrandId.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/cpuF15CacheDefaults.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/cpuF15Dmi.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/cpuF15MsrTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/cpuF15PciTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/cpuF15PowerCheck.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/cpuF15Utilities.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/cpuF15WheaInitDataTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/F15PstateHpcMode.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/cpuF15OrCacheFlushOnHalt.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/cpuF15OrCoreAfterReset.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/cpuF15OrDmi.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/cpuF15OrFeatureLeveling.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/cpuF15OrNbAfterReset.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/cpuF15OrPstate.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/cpuF15OrSoftwareThermal.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrC6State.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrCpb.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrEarlySamples.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrEquivalenceTable.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrHtPhyTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrInitEarlyTable.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrIoCstate.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrL3Features.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrLogicalIdTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrLowPwrPstate.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch06000425.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch0600050D_Enc.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch06000624_Enc.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrMicrocodePatchTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrMsgBasedC1e.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrMsrTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrMultiLinkPciTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrPciTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrPmNbCofVidInit.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrPowerMgmtSystemTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrPowerPlane.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrSharedMsrTable.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrSingleLinkPciTables.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrUtilities.c
+agesa_lib_src  += ./Proc/CPU/Family/0x15/OR/F15OrWorkaroundsTable.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuApm.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuC6State.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuCacheFlushOnHalt.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuCacheInit.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuCoreLeveling.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuCpb.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuDmi.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuFeatureLeveling.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuFeatures.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuHwC1e.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuIoCstate.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuL3Features.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuLowPwrPstate.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuMsgBasedC1e.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuPstateGather.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuPstateHpcMode.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuPstateLeveling.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuPstateTables.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuSlit.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuSrat.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuSwC1e.c
+agesa_lib_src  += ./Proc/CPU/Feature/cpuWhea.c
+agesa_lib_src  += ./Proc/CPU/Feature/PreserveMailbox.c
+agesa_lib_src  += ./Proc/HT/htFeat.c
+agesa_lib_src  += ./Proc/HT/htInterface.c
+agesa_lib_src  += ./Proc/HT/htInterfaceCoherent.c
+agesa_lib_src  += ./Proc/HT/htInterfaceGeneral.c
+agesa_lib_src  += ./Proc/HT/htInterfaceNonCoherent.c
+agesa_lib_src  += ./Proc/HT/htMain.c
+agesa_lib_src  += ./Proc/HT/htNb.c
+agesa_lib_src  += ./Proc/HT/htNotify.c
+agesa_lib_src  += ./Proc/HT/Fam10/htNbCoherentFam10.c
+agesa_lib_src  += ./Proc/HT/Fam10/htNbFam10.c
+agesa_lib_src  += ./Proc/HT/Fam10/htNbNonCoherentFam10.c
+agesa_lib_src  += ./Proc/HT/Fam10/htNbOptimizationFam10.c
+agesa_lib_src  += ./Proc/HT/Fam10/htNbSystemFam10.c
+agesa_lib_src  += ./Proc/HT/Fam10/htNbUtilitiesFam10.c
+agesa_lib_src  += ./Proc/HT/Fam15/htNbCoherentFam15.c
+agesa_lib_src  += ./Proc/HT/Fam15/htNbFam15.c
+agesa_lib_src  += ./Proc/HT/Fam15/htNbNonCoherentFam15.c
+agesa_lib_src  += ./Proc/HT/Fam15/htNbOptimizationFam15.c
+agesa_lib_src  += ./Proc/HT/Fam15/htNbSystemFam15.c
+agesa_lib_src  += ./Proc/HT/Fam15/htNbUtilitiesFam15.c
+agesa_lib_src  += ./Proc/HT/Features/htFeatDynamicDiscovery.c
+agesa_lib_src  += ./Proc/HT/Features/htFeatGanging.c
+agesa_lib_src  += ./Proc/HT/Features/htFeatNoncoherent.c
+agesa_lib_src  += ./Proc/HT/Features/htFeatOptimization.c
+agesa_lib_src  += ./Proc/HT/Features/htFeatRouting.c
+agesa_lib_src  += ./Proc/HT/Features/htFeatSets.c
+agesa_lib_src  += ./Proc/HT/Features/htFeatSublinks.c
+agesa_lib_src  += ./Proc/HT/Features/htFeatTrafficDistribution.c
+agesa_lib_src  += ./Proc/HT/Features/htIds.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph1.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph2.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph3Line.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph3Triangle.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph4Degenerate.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph4FullyConnected.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph4Kite.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph4Line.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph4Square.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph4Star.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph5FullyConnected.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph5TwistedLadder.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph6DoubloonLower.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph6DoubloonUpper.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph6FullyConnected.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph6TwinTriangles.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph6TwistedLadder.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph7FullyConnected.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph7TwistedLadder.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph8DoubloonM.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph8FullyConnected.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph8Ladder.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph8TwinFullyFourWays.c
+agesa_lib_src  += ./Proc/HT/htGraph/htGraph8TwistedLadder.c
+agesa_lib_src  += ./Proc/HT/NbCommon/htNbCoherent.c
+agesa_lib_src  += ./Proc/HT/NbCommon/htNbNonCoherent.c
+agesa_lib_src  += ./Proc/HT/NbCommon/htNbOptimization.c
+agesa_lib_src  += ./Proc/HT/NbCommon/htNbUtilities.c
+agesa_lib_src  += ./Proc/Mem/Ardk/ma.c
+agesa_lib_src  += ./Proc/Mem/Ardk/C32/marc32_3.c
+agesa_lib_src  += ./Proc/Mem/Ardk/C32/mauc32_3.c
+agesa_lib_src  += ./Proc/Mem/Ardk/HY/marhy3.c
+agesa_lib_src  += ./Proc/Mem/Ardk/HY/mauhy3.c
+agesa_lib_src  += ./Proc/Mem/Ardk/OR/maror3.c
+agesa_lib_src  += ./Proc/Mem/Ardk/OR/mauor3.c
+agesa_lib_src  += ./Proc/Mem/Feat/CHINTLV/mfchi.c
+agesa_lib_src  += ./Proc/Mem/Feat/CSINTLV/mfcsi.c
+agesa_lib_src  += ./Proc/Mem/Feat/DMI/mfDMI.c
+agesa_lib_src  += ./Proc/Mem/Feat/ECC/mfecc.c
+agesa_lib_src  += ./Proc/Mem/Feat/ECC/mfemp.c
+agesa_lib_src  += ./Proc/Mem/Feat/EXCLUDIMM/mfdimmexclud.c
+agesa_lib_src  += ./Proc/Mem/Feat/IDENDIMM/mfidendimm.c
+agesa_lib_src  += ./Proc/Mem/Feat/INTLVRN/mfintlvrn.c
+agesa_lib_src  += ./Proc/Mem/Feat/LVDDR3/mflvddr3.c
+agesa_lib_src  += ./Proc/Mem/Feat/MEMCLR/mfmemclr.c
+agesa_lib_src  += ./Proc/Mem/Feat/NDINTLV/mfndi.c
+agesa_lib_src  += ./Proc/Mem/Feat/ODTHERMAL/mfodthermal.c
+agesa_lib_src  += ./Proc/Mem/Feat/OLSPARE/mfspr.c
+agesa_lib_src  += ./Proc/Mem/Feat/PARTRN/mfParallelTraining.c
+agesa_lib_src  += ./Proc/Mem/Feat/PARTRN/mfStandardTraining.c
+agesa_lib_src  += ./Proc/Mem/Feat/S3/mfs3.c
+agesa_lib_src  += ./Proc/Mem/Feat/TABLE/mftds.c
+agesa_lib_src  += ./Proc/Mem/Main/mdef.c
+agesa_lib_src  += ./Proc/Mem/Main/merrhdl.c
+agesa_lib_src  += ./Proc/Mem/Main/minit.c
+agesa_lib_src  += ./Proc/Mem/Main/mm.c
+agesa_lib_src  += ./Proc/Mem/Main/mmConditionalPso.c
+agesa_lib_src  += ./Proc/Mem/Main/mmEcc.c
+agesa_lib_src  += ./Proc/Mem/Main/mmExcludeDimm.c
+agesa_lib_src  += ./Proc/Mem/Main/mmLvDdr3.c
+agesa_lib_src  += ./Proc/Mem/Main/mmMemClr.c
+agesa_lib_src  += ./Proc/Mem/Main/mmMemRestore.c
+agesa_lib_src  += ./Proc/Mem/Main/mmNodeInterleave.c
+agesa_lib_src  += ./Proc/Mem/Main/mmOnlineSpare.c
+agesa_lib_src  += ./Proc/Mem/Main/mmParallelTraining.c
+agesa_lib_src  += ./Proc/Mem/Main/mmStandardTraining.c
+agesa_lib_src  += ./Proc/Mem/Main/mmUmaAlloc.c
+agesa_lib_src  += ./Proc/Mem/Main/mu.c
+agesa_lib_src  += ./Proc/Mem/Main/muc.c
+agesa_lib_src  += ./Proc/Mem/NB/mn.c
+agesa_lib_src  += ./Proc/Mem/NB/mndct.c
+agesa_lib_src  += ./Proc/Mem/NB/mnfeat.c
+agesa_lib_src  += ./Proc/Mem/NB/mnflow.c
+agesa_lib_src  += ./Proc/Mem/NB/mnmct.c
+agesa_lib_src  += ./Proc/Mem/NB/mnphy.c
+agesa_lib_src  += ./Proc/Mem/NB/mnreg.c
+agesa_lib_src  += ./Proc/Mem/NB/mnS3.c
+agesa_lib_src  += ./Proc/Mem/NB/mntrain3.c
+agesa_lib_src  += ./Proc/Mem/NB/C32/mnc32.c
+agesa_lib_src  += ./Proc/Mem/NB/C32/mndctc32.c
+agesa_lib_src  += ./Proc/Mem/NB/C32/mnflowc32.c
+agesa_lib_src  += ./Proc/Mem/NB/C32/mnidendimmc32.c
+agesa_lib_src  += ./Proc/Mem/NB/C32/mnmctc32.c
+agesa_lib_src  += ./Proc/Mem/NB/C32/mnotc32.c
+agesa_lib_src  += ./Proc/Mem/NB/C32/mnParTrainc32.c
+agesa_lib_src  += ./Proc/Mem/NB/C32/mnphyc32.c
+agesa_lib_src  += ./Proc/Mem/NB/C32/mnprotoc32.c
+agesa_lib_src  += ./Proc/Mem/NB/C32/mnregc32.c
+agesa_lib_src  += ./Proc/Mem/NB/C32/mnS3c32.c
+agesa_lib_src  += ./Proc/Mem/NB/HY/mndcthy.c
+agesa_lib_src  += ./Proc/Mem/NB/HY/mnflowhy.c
+agesa_lib_src  += ./Proc/Mem/NB/HY/mnhy.c
+agesa_lib_src  += ./Proc/Mem/NB/HY/mnidendimmhy.c
+agesa_lib_src  += ./Proc/Mem/NB/HY/mnmcthy.c
+agesa_lib_src  += ./Proc/Mem/NB/HY/mnothy.c
+agesa_lib_src  += ./Proc/Mem/NB/HY/mnParTrainHy.c
+agesa_lib_src  += ./Proc/Mem/NB/HY/mnphyhy.c
+agesa_lib_src  += ./Proc/Mem/NB/HY/mnprotohy.c
+agesa_lib_src  += ./Proc/Mem/NB/HY/mnreghy.c
+agesa_lib_src  += ./Proc/Mem/NB/HY/mnS3hy.c
+agesa_lib_src  += ./Proc/Mem/NB/OR/mndctor.c
+agesa_lib_src  += ./Proc/Mem/NB/OR/mnflowor.c
+agesa_lib_src  += ./Proc/Mem/NB/OR/mnidendimmor.c
+agesa_lib_src  += ./Proc/Mem/NB/OR/mnmctor.c
+agesa_lib_src  += ./Proc/Mem/NB/OR/mnor.c
+agesa_lib_src  += ./Proc/Mem/NB/OR/mnotor.c
+agesa_lib_src  += ./Proc/Mem/NB/OR/mnpartrainor.c
+agesa_lib_src  += ./Proc/Mem/NB/OR/mnphyor.c
+agesa_lib_src  += ./Proc/Mem/NB/OR/mnprotoor.c
+agesa_lib_src  += ./Proc/Mem/NB/OR/mnregor.c
+agesa_lib_src  += ./Proc/Mem/NB/OR/mns3or.c
+agesa_lib_src  += ./Proc/Mem/Ps/mp.c
+agesa_lib_src  += ./Proc/Mem/Ps/mplribt.c
+agesa_lib_src  += ./Proc/Mem/Ps/mplrnlr.c
+agesa_lib_src  += ./Proc/Mem/Ps/mplrnpr.c
+agesa_lib_src  += ./Proc/Mem/Ps/mpmaxfreq.c
+agesa_lib_src  += ./Proc/Mem/Ps/mpmr0.c
+agesa_lib_src  += ./Proc/Mem/Ps/mpodtpat.c
+agesa_lib_src  += ./Proc/Mem/Ps/mprc10opspd.c
+agesa_lib_src  += ./Proc/Mem/Ps/mprc2ibt.c
+agesa_lib_src  += ./Proc/Mem/Ps/mprtt.c
+agesa_lib_src  += ./Proc/Mem/Ps/mps2d.c
+agesa_lib_src  += ./Proc/Mem/Ps/mpsao.c
+agesa_lib_src  += ./Proc/Mem/Ps/mpseeds.c
+agesa_lib_src  += ./Proc/Mem/Ps/C32/mprc32_3.c
+agesa_lib_src  += ./Proc/Mem/Ps/C32/mpuc32_3.c
+agesa_lib_src  += ./Proc/Mem/Ps/HY/mprhy3.c
+agesa_lib_src  += ./Proc/Mem/Ps/HY/mpshy3.c
+agesa_lib_src  += ./Proc/Mem/Ps/HY/mpuhy3.c
+agesa_lib_src  += ./Proc/Mem/Tech/mt.c
+agesa_lib_src  += ./Proc/Mem/Tech/mthdi.c
+agesa_lib_src  += ./Proc/Mem/Tech/mttdimbt.c
+agesa_lib_src  += ./Proc/Mem/Tech/mttecc.c
+agesa_lib_src  += ./Proc/Mem/Tech/mttEdgeDetect.c
+agesa_lib_src  += ./Proc/Mem/Tech/mtthrc.c
+agesa_lib_src  += ./Proc/Mem/Tech/mtthrcSeedTrain.c
+agesa_lib_src  += ./Proc/Mem/Tech/mttml.c
+agesa_lib_src  += ./Proc/Mem/Tech/mttoptsrc.c
+agesa_lib_src  += ./Proc/Mem/Tech/mttsrc.c
+agesa_lib_src  += ./Proc/Mem/Tech/DDR3/mt3.c
+agesa_lib_src  += ./Proc/Mem/Tech/DDR3/mtlrdimm3.c
+agesa_lib_src  += ./Proc/Mem/Tech/DDR3/mtot3.c
+agesa_lib_src  += ./Proc/Mem/Tech/DDR3/mtrci3.c
+agesa_lib_src  += ./Proc/Mem/Tech/DDR3/mtsdi3.c
+agesa_lib_src  += ./Proc/Mem/Tech/DDR3/mtspd3.c
+agesa_lib_src  += ./Proc/Mem/Tech/DDR3/mttecc3.c
+agesa_lib_src  += ./Proc/Mem/Tech/DDR3/mttwl3.c
+agesa_lib_src  += ./Proc/Recovery/HT/htInitRecovery.c
+agesa_lib_src  += ./Proc/Recovery/HT/htInitReset.c
+
+agesa_lib_src  += ./Proc/Mem/Main/mmflow.c
+agesa_lib_src  += ./Proc/Mem/Main/OR/mmflowor.c
+agesa_lib_src  += ./Proc/Mem/Ps/OR/mpor3.c
+ifeq ($(CONFIG_CPU_AMD_SOCKET_C32), y)
+	agesa_lib_src  += ./Proc/Mem/Main/C32/mmflowC32.c
+	agesa_lib_src  += ./Proc/Mem/Ps/OR/C32/mpLorC3.c
+	agesa_lib_src  += ./Proc/Mem/Ps/OR/C32/mpRorC3.c
+	agesa_lib_src  += ./Proc/Mem/Ps/OR/C32/mpUorC3.c
+
+#	agesa_lib_src  += ./Proc/Mem/Main/HY/mmflowhy.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/F10MicrocodePatch010000c5.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/F10MicrocodePatch010000d9.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/F10RevDL3Features.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/F10RevDMsgBasedC1e.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/F10RevDUtilities.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyEquivalenceTable.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyHtPhyTables.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyInitEarlyTable.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyLogicalIdTables.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyMicrocodePatchTables.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyMsrTables.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyPciTables.c
+endif
+ifeq ($(CONFIG_CPU_AMD_SOCKET_G34), y)
+	agesa_lib_src  += ./Proc/Mem/Main/HY/mmflowhy.c
+	agesa_lib_src  += ./Proc/Mem/Ps/OR/G34/mpLorG3.c
+	agesa_lib_src  += ./Proc/Mem/Ps/OR/G34/mpRorG3.c
+	agesa_lib_src  += ./Proc/Mem/Ps/OR/G34/mpUorG3.c
+
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/F10MicrocodePatch010000c5.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/F10MicrocodePatch010000d9.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/F10RevDL3Features.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/F10RevDMsgBasedC1e.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/F10RevDUtilities.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyEquivalenceTable.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyHtPhyTables.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyInitEarlyTable.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyLogicalIdTables.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyMicrocodePatchTables.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyMsrTables.c
+	agesa_lib_src  += ./Proc/CPU/Family/0x10/RevD/HY/F10HyPciTables.c
+endif
+
+ifeq ($(CONFIG_CPU_AMD_SOCKET_AM3R2), y)
+	agesa_lib_src += ./Proc/Mem/Main/DA/mmflowda.c
+	agesa_lib_src += ./Proc/Mem/Main/RB/mmflowRb.c
+	agesa_lib_src += ./Proc/Mem/Main/PH/mmflowPh.c
+
+	agesa_lib_src  += ./Proc/Mem/Ps/OR/AM3/mpUorA3.c
+	agesa_lib_src  += ./Proc/Mem/Ps/OR/AM3/mpSorA3.c
+
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c6.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/RB/F10RbMsrTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/RB/F10RbLogicalIdTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/RB/F10RbHtPhyTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/RB/F10RbMicrocodePatchTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/RB/F10RbEquivalenceTable.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/RB/F10RbPciTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/BL/F10BlHtPhyTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/BL/F10BlEquivalenceTable.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/BL/F10BlPciTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/BL/F10BlLogicalIdTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/BL/F10BlMsrTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/BL/F10BlCacheFlushOnHalt.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/BL/F10BlMicrocodePatchTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/F10RevCUtilities.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/F10RevCMsrTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c7.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/DA/F10DaHtPhyTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/DA/F10DaMsrTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/DA/F10DaMicrocodePatchTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/DA/F10DaCacheFlushOnHalt.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/DA/F10DaPciTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/DA/F10DaEquivalenceTable.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/DA/F10DaLogicalIdTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/F10MicrocodePatch01000085.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/F10RevCHwC1e.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/F10RevCPciTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/F10RevCHtPhyTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/F10RevCSwC1e.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c8.c
+
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevE/PH/F10PhMicrocodePatchTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevE/PH/F10PhHtPhyTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevE/PH/F10PhEquivalenceTable.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevE/PH/F10PhLogicalIdTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevE/F10MicrocodePatch010000bf.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevE/F10RevEUtilities.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevE/F10RevEPciTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevE/F10RevEMsrTables.c
+	agesa_lib_src += ./Proc/CPU/Family/0x10/RevE/F10RevEHtPhyTables.c
+
+	agesa_lib_src += ./Proc/Mem/NB/DA/mnidendimmda.c
+	agesa_lib_src += ./Proc/Mem/NB/DA/mnregda.c
+	agesa_lib_src += ./Proc/Mem/NB/DA/mnS3da.c
+	agesa_lib_src += ./Proc/Mem/NB/DA/mnprotoda.c
+	agesa_lib_src += ./Proc/Mem/NB/DA/mnda.c
+	agesa_lib_src += ./Proc/Mem/NB/DA/mndctda.c
+	agesa_lib_src += ./Proc/Mem/NB/DA/mnmctda.c
+	agesa_lib_src += ./Proc/Mem/NB/DA/mnflowda.c
+	agesa_lib_src += ./Proc/Mem/NB/DA/mnParTrainDa.c
+	agesa_lib_src += ./Proc/Mem/NB/DA/mnotda.c
+	agesa_lib_src += ./Proc/Mem/NB/PH/mnS3Ph.c
+	agesa_lib_src += ./Proc/Mem/NB/PH/mnflowPh.c
+	agesa_lib_src += ./Proc/Mem/NB/PH/mnidendimmPh.c
+	agesa_lib_src += ./Proc/Mem/NB/PH/mnmctPh.c
+	agesa_lib_src += ./Proc/Mem/NB/PH/mnPh.c
+	agesa_lib_src += ./Proc/Mem/NB/PH/mnmctPh.c
+	agesa_lib_src += ./Proc/Mem/NB/PH/mnflowPh.c
+	agesa_lib_src += ./Proc/Mem/NB/PH/mnidendimmPh.c
+	agesa_lib_src += ./Proc/Mem/NB/RB/mnidendimmRb.c
+	agesa_lib_src += ./Proc/Mem/NB/RB/mnRb.c
+	agesa_lib_src += ./Proc/Mem/NB/RB/mnflowRb.c
+	agesa_lib_src += ./Proc/Mem/NB/RB/mnS3Rb.c
+
+	agesa_lib_src += ./Proc/Mem/Ardk/DA/masda2.c
+	agesa_lib_src += ./Proc/Mem/Ardk/DA/masda3.c
+	agesa_lib_src += ./Proc/Mem/Ardk/DA/mauda3.c
+	agesa_lib_src += ./Proc/Mem/Ardk/PH/mauPh3.c
+	agesa_lib_src += ./Proc/Mem/Ardk/PH/masph3.c
+	agesa_lib_src += ./Proc/Mem/Ardk/RB/mauRb3.c
+	agesa_lib_src += ./Proc/Mem/Ardk/RB/masRb3.c
+
+	agesa_lib_src += ./Proc/Mem/Ps/DA/mpuda3.c
+	agesa_lib_src += ./Proc/Mem/Ps/DA/mpsda3.c
+	agesa_lib_src += ./Proc/Mem/Ps/DA/mpsda2.c
+	agesa_lib_src += ./Proc/Mem/Ps/PH/mpuph3.c
+	agesa_lib_src += ./Proc/Mem/Ps/PH/mpsph3.c
+	agesa_lib_src += ./Proc/Mem/Ps/RB/mpuRb3.c
+	agesa_lib_src += ./Proc/Mem/Ps/RB/mpsRb3.c
+endif
+
+romstage-y += $(agesa_lib_src)
+ramstage-y += $(agesa_lib_src)
+
+## AGESA need sse feature ##
+AGESA_CFLAGS = -msse3 -fno-zero-initialized-in-bss -fno-strict-aliasing
+
+export AGESA_ROOT
+export AGESA_INC
+export AGESA_CFLAGS
+CC := $(CC) $(AGESA_INC) $(AGESA_CFLAGS)
+
diff --git a/src/vendorcode/amd/agesa/f15/Porting.h b/src/vendorcode/amd/agesa/f15/Porting.h
new file mode 100644
index 0000000000..48ac3903d6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Porting.h
@@ -0,0 +1,289 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Describes compiler dependencies - to support several compile time environments
+ *
+ * Contains compiler environment porting descriptions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Includes
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _PORTING_H_
+#define _PORTING_H_
+
+#if defined (_MSC_VER)
+  #include <intrin.h>
+  void _disable (void);
+  void _enable (void);
+  #pragma warning(disable: 4103 4001 4733)
+  #pragma intrinsic (_disable, _enable)
+#pragma warning(push)
+  // -----------------------------------------------------------------------
+  //   Define a code_seg MACRO
+  //
+  #define MAKE_AS_A_STRING(arg) #arg
+
+  #define CODE_GROUP(arg) __pragma (code_seg (MAKE_AS_A_STRING (.t##arg)))
+
+  #define RDATA_GROUP(arg) __pragma (const_seg (MAKE_AS_A_STRING (.d##arg)))
+
+  //#include <intrin.h>  // MS has built-in functions
+
+  #if _MSC_VER < 900
+    // -----------------------------------------------------------------------
+    //    Assume MSVC 1.52C (16-bit)
+    //
+    //    NOTE: When using MSVC 1.52C use the following command line:
+    //
+    //       CL.EXE /G3 /AL /O1i /Fa <FILENAME.C>
+    //
+    //    This will produce 32-bit code in USE16 segment that is optimized for code
+    //    size.
+    typedef void          VOID;
+
+    // Create the universal 32, 16, and 8-bit data types
+    typedef unsigned long   UINTN;
+    typedef          long   INT32;
+    typedef unsigned long   UINT32;
+    typedef          int    INT16;
+    typedef unsigned int    UINT16;
+    typedef          char   INT8;
+    typedef unsigned char   UINT8;
+    typedef          char   CHAR8;
+    typedef unsigned short  CHAR16;
+
+    /// struct for 16-bit environment handling of 64-bit value
+    typedef struct _UINT64 {
+      IN OUT  UINT32 lo;      ///< lower 32-bits of 64-bit value
+      IN OUT  UINT32 hi;      ///< highest 32-bits of 64-bit value
+    } UINT64;
+
+    // Create the Boolean type
+    #define TRUE  1
+    #define FALSE 0
+    typedef unsigned char BOOLEAN;
+
+    #define CONST const
+    #define STATIC static
+    #define VOLATILE volatile
+    #define CALLCONV __pascal
+    #define ROMDATA __based( __segname( "_CODE" ) )
+    #define _16BYTE_ALIGN   __declspec(align(16))
+
+    // Force tight packing of structures
+    // Note: Entire AGESA (Project / Solution) will be using pragma pack 1
+    #pragma warning( disable : 4103 ) // Disable '#pragma pack' in .h warning
+    #pragma pack(1)
+
+    //   Disable WORD->BYTE automatic conversion warnings.  Example:
+    //   BYTE LocalByte;
+    //   void MyFunc(BYTE val);
+    //
+    //   MyFunc(LocalByte*2+1); // Warning, automatic conversion
+    //
+    //   The problem is any time math is performed on a BYTE, it is converted to a
+    //   WORD by MSVC 1.52c, and then when it is converted back to a BYTE, a warning
+    //   is generated.  Disable warning C4761
+    #pragma warning( disable : 4761 )
+
+  #else
+    // -----------------------------------------------------------------------
+    //   Assume a 32-bit MSVC++
+    //
+    // Disable the following warnings:
+    // 4100 - 'identifier' : unreferenced formal parameter
+    // 4276 - 'function' : no prototype provided; assumed no parameters
+    // 4214 - non standard extension used : bit field types other than int
+    // 4001 - nonstandard extension 'single line comment' was used
+    // 4142 - benign redefinition of type for following declaration
+    //      - typedef char    INT8
+    #if defined (_M_IX86)
+      #pragma warning (disable: 4100 4276 4214 4001 4142 4305 4306)
+
+      #ifndef VOID
+        typedef void VOID;
+      #endif
+    // Create the universal 32, 16, and 8-bit data types
+      #ifndef UINTN
+        typedef unsigned __w64 UINTN;
+      #endif
+      typedef          __int64 INT64;
+      typedef unsigned __int64 UINT64;
+      typedef          int   INT32;
+      typedef unsigned int   UINT32;
+      typedef          short INT16;
+      typedef unsigned short UINT16;
+      typedef          char  INT8;
+      typedef unsigned char  UINT8;
+      typedef          char  CHAR8;
+      typedef unsigned short CHAR16;
+
+    // Create the Boolean type
+      #ifndef TRUE
+        #define TRUE  1
+      #endif
+      #ifndef FALSE
+        #define FALSE 0
+      #endif
+      typedef unsigned char BOOLEAN;
+
+      // Force tight packing of structures
+      // Note: Entire AGESA (Project / Solution) will be using pragma pack 1
+      #pragma pack(1)
+
+      #define CONST const
+      #define STATIC static
+      #define VOLATILE volatile
+      #define CALLCONV
+      #define ROMDATA
+      #define _16BYTE_ALIGN __declspec(align(64))
+      // 64 bit of compiler
+    #else
+      #pragma warning (disable: 4100 4276 4214 4001 4142 4305 4306 4366)
+
+      #ifndef VOID
+        typedef void VOID;
+      #endif
+      // Create the universal 32, 16, and 8-bit data types
+      #ifndef UINTN
+        typedef unsigned __int64 UINTN;
+      #endif
+      typedef          __int64 INT64;
+      typedef unsigned __int64 UINT64;
+      typedef          int   INT32;
+      typedef unsigned int   UINT32;
+      typedef          short INT16;
+      typedef unsigned short UINT16;
+      typedef          char  INT8;
+      typedef unsigned char  UINT8;
+      typedef          char  CHAR8;
+      typedef unsigned short CHAR16;
+
+      // Create the Boolean type
+      #ifndef TRUE
+        #define TRUE  1
+      #endif
+      #ifndef FALSE
+        #define FALSE 0
+      #endif
+      typedef unsigned char BOOLEAN;
+
+      // Force tight packing of structures
+      // Note: Entire AGESA (Project / Solution) will be using pragma pack 1
+      #pragma pack(1)
+
+      #define CONST const
+      #define STATIC static
+      #define VOLATILE volatile
+      #define CALLCONV
+      #define ROMDATA
+    #endif
+  #endif
+  // -----------------------------------------------------------------------
+  // End of MS compiler versions
+
+
+#elif defined __GNUC__
+
+  #define IN
+  #define OUT
+  #define STATIC static
+  #define VOLATILE volatile
+  #define TRUE 1
+  #define FALSE 0
+  #define CONST const
+  #define ROMDATA
+  #define CALLCONV
+  #define _16BYTE_ALIGN __attribute__ ((aligned (16)))
+
+  typedef unsigned char  BOOLEAN;
+  typedef   signed char  INT8;
+  typedef   signed short INT16;
+  typedef   signed long  INT32;
+  typedef unsigned char  CHAR8;
+  typedef unsigned char  UINT8;
+  typedef unsigned short UINT16;
+  typedef unsigned long  UINT32;
+  typedef unsigned long  UINTN;
+  typedef unsigned long  long UINT64;
+  typedef void VOID;
+  //typedef unsigned long  size_t;
+//typedef unsigned int   uintptr_t;
+// Force tight packing of structures
+// Note: Entire AGESA (Project / Solution) will be using pragma pack 1
+#pragma pack(1)
+
+  #define CODE_GROUP(arg)
+  #define RDATA_GROUP(arg)
+
+#define FUNC_ATTRIBUTE(arg) __attribute__((arg))
+#define MAKE_AS_A_STRING(arg) #arg
+
+// -----------------------------------------------------------------------
+// Common definitions for all compilers
+//
+#include <stddef.h>
+#include "gcc-intrin.h"
+
+#include <assert.h>
+#include <console/console.h>
+#include <console/loglevel.h>
+#ifndef NULL
+  #define NULL              (void *)0
+#endif
+
+#else
+  // -----------------------------------------------------------------------
+  // Unknown or unsupported compiler
+  //
+  #error "Unknown compiler in use"
+#endif
+
+
+
+// -----------------------------------------------------------------------
+// Common definitions for all compilers
+//
+
+//Support forward reference construct
+#define AGESA_FORWARD_DECLARATION(x) typedef struct _##x x
+
+
+// The following are use in conformance to the UEFI style guide
+#define IN
+#define OUT
+
+#endif // _PORTING_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10InitEarlyTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10InitEarlyTable.c
new file mode 100644
index 0000000000..c54537359c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10InitEarlyTable.c
@@ -0,0 +1,126 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize the Family 10h specific way of running early initialization.
+ *
+ * Returns the table of initialization steps to perform at
+ * AmdInitEarly.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_F10INITEARLYTABLE_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GetF10EarlyInitOnCoreTable (
+  IN       CPU_SPECIFIC_SERVICES                *FamilyServices,
+     OUT   CONST S_PERFORM_EARLY_INIT_ON_CORE   **Table,
+  IN       AMD_CPU_EARLY_PARAMS                 *EarlyParams,
+  IN       AMD_CONFIG_PARAMS                    *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern F_PERFORM_EARLY_INIT_ON_CORE McaInitializationAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE SetRegistersFromTablesAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE SetBrandIdRegistersAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE LocalApicInitializationAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE LoadMicrocodePatchAtEarly;
+
+CONST S_PERFORM_EARLY_INIT_ON_CORE ROMDATA F10EarlyInitOnCoreTable[] =
+{
+  {McaInitializationAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {SetRegistersFromTablesAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {SetBrandIdRegistersAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {LocalApicInitializationAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {LoadMicrocodePatchAtEarly, PERFORM_EARLY_WARM_RESET},
+  {NULL, 0}
+};
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that may be invoked at AmdCpuEarly to return the steps that a
+ * processor that uses the standard initialization steps should take.
+ *
+ *  @CpuServiceMethod{::F_GET_EARLY_INIT_TABLE}.
+ *
+ * @param[in]       FamilyServices    The current Family Specific Services.
+ * @param[out]      Table             Table of appropriate init steps for the executing core.
+ * @param[in]       EarlyParams       Service Interface structure to initialize.
+ * @param[in]       StdHeader         Opaque handle to standard config header.
+ *
+ */
+VOID
+GetF10EarlyInitOnCoreTable (
+  IN       CPU_SPECIFIC_SERVICES                *FamilyServices,
+     OUT   CONST S_PERFORM_EARLY_INIT_ON_CORE   **Table,
+  IN       AMD_CPU_EARLY_PARAMS                 *EarlyParams,
+  IN       AMD_CONFIG_PARAMS                    *StdHeader
+  )
+{
+  *Table = F10EarlyInitOnCoreTable;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10IoCstate.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10IoCstate.c
new file mode 100644
index 0000000000..904e60b44f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10IoCstate.c
@@ -0,0 +1,300 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 IO C-state feature support functions.
+ *
+ * Provides the functions necessary to initialize the IO C-state feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFeatures.h"
+#include "cpuIoCstate.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "CommonReturns.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X10_F10IOCSTATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F10InitializeIoCstateOnCore (
+  IN       VOID *CstateBaseMsr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+F10IsIoCstateFeatureSupported (
+  IN       IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+  IN       UINT32                    Socket,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE            IoCstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable IO Cstate on a family 10h CPU.
+ *
+ * @param[in]    IoCstateServices   Pointer to this CPU's IO Cstate family services.
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F10InitializeIoCstate (
+  IN       IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+  IN       UINT64                    EntryPoint,
+  IN       PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  UINT64   LocalMsrRegister;
+  AP_TASK  TaskPtr;
+
+  if ((EntryPoint & CPU_FEAT_AFTER_PM_INIT) != 0) {
+    // Initialize MSRC001_0073[CstateAddr] on each core to a region of
+    // the IO address map with 8 consecutive available addresses.
+    LocalMsrRegister = 0;
+
+    ((CSTATE_ADDRESS_MSR *) &LocalMsrRegister)->CstateAddr = PlatformConfig->CStateIoBaseAddress;
+
+    TaskPtr.FuncAddress.PfApTaskI = F10InitializeIoCstateOnCore;
+    TaskPtr.DataTransfer.DataSizeInDwords = 2;
+    TaskPtr.DataTransfer.DataPtr = &LocalMsrRegister;
+    TaskPtr.DataTransfer.DataTransferFlags = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, NULL);
+  }
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable CState on a family 10h core.
+ *
+ * @param[in]    CstateBaseMsr      MSR value to write to C001_0073 as determined by core 0.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F10InitializeIoCstateOnCore (
+  IN       VOID *CstateBaseMsr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  // Initialize MSRC001_0073[CstateAddr] on each core
+  LibAmdMsrWrite (MSR_CSTATE_ADDRESS, (UINT64 *) CstateBaseMsr, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the size of CST object
+ *
+ * @param[in]    IoCstateServices   IO Cstate services.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       CstObjSize         Size of CST Object
+ *
+ */
+UINT32
+STATIC
+F10GetAcpiCstObj (
+  IN       IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+  IN       PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  return (CST_HEADER_SIZE + CST_BODY_SIZE);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Routine to generate the C-State ACPI objects
+ *
+ * @param[in]      IoCstateServices       IO Cstate services.
+ * @param[in]      LocalApicId            Local Apic Id for each core.
+ * @param[in, out] **PstateAcpiBufferPtr  Pointer to the Acpi Buffer Pointer.
+ * @param[in]      StdHeader              Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F10CreateAcpiCstObj (
+  IN       IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+  IN       UINT8                     LocalApicId,
+  IN OUT   VOID                      **PstateAcpiBufferPtr,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  UINT64            MsrData;
+  CST_HEADER_STRUCT *CstHeaderPtr;
+  CST_BODY_STRUCT   *CstBodyPtr;
+
+  // Read from MSR C0010073 to obtain CstateAddr
+  LibAmdMsrRead (MSR_CSTATE_ADDRESS, &MsrData, StdHeader);
+  ASSERT ((((CSTATE_ADDRESS_MSR *) &MsrData)->CstateAddr != 0) &&
+          (((CSTATE_ADDRESS_MSR *) &MsrData)->CstateAddr <= 0xFFF8));
+
+  // Typecast the pointer
+  CstHeaderPtr = (CST_HEADER_STRUCT *) *PstateAcpiBufferPtr;
+
+  // Set CST Header
+  CstHeaderPtr->NameOpcode  = NAME_OPCODE;
+  CstHeaderPtr->CstName_a__ = CST_NAME__;
+  CstHeaderPtr->CstName_a_C = CST_NAME_C;
+  CstHeaderPtr->CstName_a_S = CST_NAME_S;
+  CstHeaderPtr->CstName_a_T = CST_NAME_T;
+
+  // Typecast the pointer
+  CstHeaderPtr++;
+  CstBodyPtr = (CST_BODY_STRUCT *) CstHeaderPtr;
+
+  // Set CST Body
+  CstBodyPtr->PkgOpcode      = PACKAGE_OPCODE;
+  CstBodyPtr->PkgLength      = CST_LENGTH;
+  CstBodyPtr->PkgElements    = CST_NUM_OF_ELEMENTS;
+  CstBodyPtr->BytePrefix     = BYTE_PREFIX_OPCODE;
+  CstBodyPtr->Count          = CST_COUNT;
+  CstBodyPtr->PkgOpcode2     = PACKAGE_OPCODE;
+  CstBodyPtr->PkgLength2     = CST_PKG_LENGTH;
+  CstBodyPtr->PkgElements2   = CST_PKG_ELEMENTS;
+  CstBodyPtr->BufferOpcode   = BUFFER_OPCODE;
+  CstBodyPtr->BufferLength   = CST_SUBPKG_LENGTH;
+  CstBodyPtr->BufferElements = CST_SUBPKG_ELEMENTS;
+  CstBodyPtr->BufferOpcode2  = BUFFER_OPCODE;
+  CstBodyPtr->GdrOpcode      = GENERIC_REG_DESCRIPTION;
+  CstBodyPtr->GdrLength      = CST_GDR_LENGTH;
+  CstBodyPtr->AddrSpaceId    = GDR_ASI_SYSTEM_IO;
+  CstBodyPtr->RegBitWidth    = 0x08;
+  CstBodyPtr->RegBitOffset   = 0x00;
+  CstBodyPtr->AddressSize    = GDR_ASZ_BYTE_ACCESS;
+  CstBodyPtr->RegisterAddr   = ((CSTATE_ADDRESS_MSR *) &MsrData)->CstateAddr;
+  CstBodyPtr->EndTag         = 0x0079;
+  CstBodyPtr->BytePrefix2    = BYTE_PREFIX_OPCODE;
+  CstBodyPtr->Type           = CST_C2_TYPE;
+  CstBodyPtr->WordPrefix     = WORD_PREFIX_OPCODE;
+  CstBodyPtr->Latency        = 0x4B;
+  CstBodyPtr->DWordPrefix    = DWORD_PREFIX_OPCODE;
+  CstBodyPtr->Power          = 0;
+
+  CstBodyPtr++;
+
+  //Update the pointer
+  *PstateAcpiBufferPtr = CstBodyPtr;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Routine to check whether IO Cstate should be supported.
+ *
+ * @param[in]      IoCstateServices      IO Cstate services.
+ * @param[in]      Socket                Zero-based socket number.
+ * @param[in]      StdHeader             Config Handle for library, services.
+ *
+ * @retval         TRUE                  Support IO Cstate.
+ * @retval         FALSE                 Do not support IO Cstate.
+ *
+ */
+BOOLEAN
+F10IsIoCstateFeatureSupported (
+  IN       IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+  IN       UINT32                    Socket,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  UINT64 LocalMsrRegister;
+  CPUID_DATA     CpuId;
+  CPU_LOGICAL_ID LogicalId;
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+  // Only Rev.E processor with CPB enabled and ucode 010000BF or later loaded
+  // MSR_C001_0073 can be programmed
+  if ((LogicalId.Revision & AMD_F10_Ex) != 0) {
+    LibAmdCpuidRead (AMD_CPUID_APM, &CpuId, StdHeader);
+    if (((CpuId.EDX_Reg & 0x00000200) >> 9) == 1) {
+      LibAmdMsrRead (MSR_PATCH_LEVEL, &LocalMsrRegister, StdHeader);
+      if ((LocalMsrRegister & 0xffffffff) >= 0x010000BF) {
+        return TRUE;
+      }
+    }
+  }
+  return FALSE;
+}
+
+CONST IO_CSTATE_FAMILY_SERVICES ROMDATA F10IoCstateSupport =
+{
+  0,
+  F10IsIoCstateFeatureSupported,
+  F10InitializeIoCstate,
+  F10GetAcpiCstObj,
+  F10CreateAcpiCstObj,
+  (PF_IO_CSTATE_IS_CSD_GENERATED) CommonReturnFalse
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10MultiLinkPciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10MultiLinkPciTables.c
new file mode 100644
index 0000000000..61914a6759
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10MultiLinkPciTables.c
@@ -0,0 +1,1537 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 PCI tables from Multi-Link BKDG paragraph recommended settings.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 59564 $   @e \$Date: 2011-09-26 12:33:51 -0600 (Mon, 26 Sep 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_F10MULTILINKPCITABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10MultiLinkPciRegisters[] =
+{
+  // Function 0
+
+// F0x68 - Link Transaction Control
+// bit[14:13], BufPriRel = 02h
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      (AMD_F10_ALL & ~AMD_F10_Dx),          // CpuRevision  rev C or less.
+    },
+    {AMD_PF_MULTI_LINK},                     // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68),  // Address
+      0x00004000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 2
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 2
+  // 17:16 NpReqData: 2
+  // 15:12 ProbeCmd: 9
+  // 11:8 RspCmd: 9
+  // 7:5 PReq: 2
+  // 4:0 NpReqCmd: 4
+{
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      HT_HOST_FEAT_COHERENT,              // link features
+      0x10,                               // address
+      0x048A9944,                         // data
+      0x0FFFFFFF                          // mask
+    }}
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 2
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 1
+  // 17:16 NpReqData: 1
+  // 15:12 ProbeCmd: 0
+  // 11:8 RspCmd: 2
+  // 7:5 PReq: 4
+  // 4:0 NpReqCmd: 18
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      HT_HOST_FEAT_NONCOHERENT,           // link features
+      0x10,                               // address
+      0x04850292,                         // data
+      0x0FFFFFFF                          // mask
+    }}
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 0
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 1
+  // 17:16 NpReqData: 1
+  // 15:12 ProbeCmd: 0
+  // 11:8 RspCmd: 2
+  // 7:5 PReq: 6
+  // 4:0 NpReqCmd: 16
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      HT_HOST_FEAT_NONCOHERENT,           // link features
+      0x10,                               // address
+      0x008502D0,                         // data
+      0x0FFFFFFF                          // mask
+    }}
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 0
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 3
+  // 17:16 NpReqData: 2
+  // 15:12 ProbeCmd: 8
+  // 11:8 RspCmd: 9
+  // 7:5 PReq: 2
+  // 4:0 NpReqCmd: 4
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      HT_HOST_FEAT_COHERENT,              // link features
+      0x10,                               // address
+      0x008E8944,                         // data
+      0x0FFFFFFF                          // mask
+    }}
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 0
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 1
+  // 17:16 NpReqData: 1
+  // 15:12 ProbeCmd: 0
+  // 11:8 RspCmd: 2
+  // 7:5 PReq: 6
+  // 4:0 NpReqCmd: 15
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      HT_HOST_FEAT_NONCOHERENT,           // link features
+      0x10,                               // address
+      0x008502CF,                         // data
+      0x0FFFFFFF                          // mask
+    }}
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 0
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 0
+  // 18:16 IsocNpReqCmd: 0
+{
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      HT_HOST_FEAT_COHERENT,              // link features
+      0x14,                               // address
+      0x00000000,                         // data
+      0x1FFF0000                          // mask
+    }}
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 0
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 0
+  // 18:16 IsocNpReqCmd: 0
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      HT_HOST_FEAT_NONCOHERENT,           // link features
+      0x14,                               // address
+      0x00000000,                         // data
+      0x1FFF0000                          // mask
+    }}
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 1
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 0
+  // 18:16 IsocNpReqCmd: 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      HT_HOST_FEAT_COHERENT,              // link features
+      0x14,                               // address
+      0x02010000,                         // data
+      0x1FFF0000                          // mask
+    }}
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 0
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 0
+  // 18:16 IsocNpReqCmd: 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      HT_HOST_FEAT_NONCOHERENT,           // link features
+      0x14,                               // address
+      0x00010000,                         // data
+      0x1FFF0000                          // mask
+    }}
+  },
+
+// Function 3 - Misc. Control
+
+// F3x6C - Data Buffer Control
+// XBAR buffer settings
+// bits[2:0]   UpReqDBC = 2
+// bits[5:4]   DnReqDBC = 1
+// bits[7:6]   DnRspDBC = 1
+// bit[15]     DatBuf24 = 1
+// bits[18:16] UpRspDBC = 1
+// bits[30:28] IsocRspDBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      MAKE_SBDFO(0, 0, 24, FUNC_3, 0x6C),   // Address
+      0x00018052,                           // regData
+      0x700780F7,                           // regMask
+    }}
+  },
+// F3x6C - Data Buffer Control
+// XBAR buffer settings
+// bits[2:0]   UpReqDBC = 2
+// bits[5:4]   DnReqDBC = 1
+// bits[7:6]   DnRspDBC = 1
+// bit[15]     DatBuf24 = 1
+// bits[18:16] UpRspDBC = 2
+// bits[30:28] IsocRspDBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      MAKE_SBDFO(0, 0, 24, FUNC_3, 0x6C),   // Address
+      0x00028052,                           // regData
+      0x700780F7,                           // regMask
+    }}
+  },
+// F3x6C - Data Buffer Control
+// bits[2:0]   UpReqDBC = 2
+// bits[5:4]   DnReqDBC = 1
+// bits[7:6]   DnRspDBC = 1
+// bit[15]     DatBuf24 = 1
+// bits[18:16] UpRspDBC = 1
+// bits[30:28] IsocRspDBC = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x6C),  // Address
+      0x10018052,                           // regData
+      0x700780F7,                           // regMask
+    }}
+  },
+// F3x70 - SRI_to_XBAR Command Buffer Count
+// bits[2:0]   UpReqCBC = 3
+// bits[5:4]   DnReqCBC = 1
+// bits[7:6]   DnRspCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 1
+// bits[18:16] UpRspCBC = 4
+// bits[22:20] IsocReqCBC = 0
+// bits[26:24] IsocPreqCBC = 0
+// bits[30:28] IsocRspCBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x70),  // Address
+      0x00041153,                           // regData
+      0x777777F7,                           // regMask
+    }}
+  },
+// F3x70 - SRI_to_XBAR Command Buffer Count
+// bits[2:0]   UpReqCBC = 3
+// bits[5:4]   DnReqCBC = 1
+// bits[7:6]   DnRspCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 1
+// bits[18:16] UpRspCBC = 5
+// bits[22:20] IsocReqCBC = 0
+// bits[26:24] IsocPreqCBC = 0
+// bits[30:28] IsocRspCBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                          // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x70),  // Address
+      0x00051153,                           // regData
+      0x777777F7,                           // regMask
+    }}
+  },
+// F3x70 - SRI_to_XBAR Command Buffer Count
+// bits[2:0]   UpReqCBC = 3
+// bits[5:4]   DnReqCBC = 1
+// bits[7:6]   DnRspCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 1
+// bits[18:16] UpRspCBC = 5
+// bits[22:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 0
+// bits[30:28] IsocRspCBC = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x70),  // Address
+      0x10151153,                           // regData
+      0x777777F7,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 1
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 0
+// bits[26:24] IsocPreqCBC = 0
+// bits[30:28] DRReqCBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x00081111,                           // regData
+      0x00FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 1
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 0
+// bits[30:28] DRReqCBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x00181111,                           // regData
+      0x00FF7777,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 20
+// bits[11:8] Sri2XbarFreeXreqCBC = 9
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 9
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+// bits[30:28] Xbar2SriFreeListCBInc = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00090914,                           // regData
+      0x707FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 24
+// bits[11:8] Sri2XbarFreeXreqCBC = 9
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 9
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+// bits[30:28] Xbar2SriFreeListCBInc = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                          // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (CORE_RANGE_0 (COUNT_RANGE_LOW, 4) | COUNT_RANGE_NONE),   // 4 or fewer cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00090A18,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 22
+// bits[11:8] Sri2XbarFreeXreqCBC = 9
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 9
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+// bits[30:28] Xbar2SriFreeListCBInc = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (CORE_RANGE_0 (5, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),  // greater than 4, ex. 6.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00090A16,                           // regData
+      0x707FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 23
+// bits[11:8] Sri2XbarFreeXreqCBC = 9
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 9
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+// bits[30:28] Xbar2SriFreeListCBInc = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00090917,                           // regData
+      0x707FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 23
+// bits[11:8] Sri2XbarFreeXreqCBC = 9
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 9
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+// bits[30:28] Xbar2SriFreeListCBInc = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                          // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (CORE_RANGE_0 (COUNT_RANGE_LOW, 4) | COUNT_RANGE_NONE),   // 4 or fewer cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00090917,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 21
+// bits[11:8] Sri2XbarFreeXreqCBC = 9
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 9
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+// bits[30:28] Xbar2SriFreeListCBInc = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (CORE_RANGE_0 (5, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),  // greater than 4, ex. 6.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00090915,                           // regData
+      0x707FFF1F,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 1
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 0
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 0
+// bits[23:20] FreeTok = A
+  {
+    ProcCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (PROCESSOR_RANGE_0 (COUNT_RANGE_LOW, 1) | PROCESSOR_RANGE_1 (3, COUNT_RANGE_HIGH)),  // anything but two.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00A00755,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 1
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 0
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 0
+// bits[23:20] FreeTok = 8
+  {
+    ProcCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (PROCESSOR_RANGE_0 (2, 2) | COUNT_RANGE_NONE),   // exactly two.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00800755,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 1
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 1
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 1
+// bits[23:20] FreeTok = 10
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (DEGREE_RANGE_0 (COUNT_RANGE_LOW, 1) | COUNT_RANGE_NONE),     // 2 Socket, half populated.
+      PACKAGE_TYPE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00A11755,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 1
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 1
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 1
+// bits[23:20] FreeTok = 9
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,
+      (DEGREE_RANGE_0 (COUNT_RANGE_LOW, 1) | COUNT_RANGE_NONE),     // 2 Socket, half populated.
+      PACKAGE_TYPE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00911755,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 1
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 1
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 1
+// bits[23:20] FreeTok = 5
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (DEGREE_RANGE_0 (3, 3) | COUNT_RANGE_NONE),     // 2 Socket, fully populated.
+      PACKAGE_TYPE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00511755,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 1
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 1
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 1
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 1
+// bits[23:20] FreeTok = 7
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,
+      (DEGREE_RANGE_0 (3, 3) | COUNT_RANGE_NONE),     // 2 Socket, fully populated.
+      PACKAGE_TYPE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00711555,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 1
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 1
+// bits[15:14] IsocPreqTok = ]
+// bits[17:16] IsocRspTok = 1
+// bits[23:20] FreeTok = 8
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (DEGREE_RANGE_0 (2, 2) | COUNT_RANGE_NONE),     // 4 Socket, half populated.
+      PACKAGE_TYPE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00811755,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 1
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 1
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 2
+// bits[23:20] FreeTok = 2
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (DEGREE_RANGE_0 (4, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),     // 4 Socket, fully populated.
+      PACKAGE_TYPE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00211755,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 1
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 1
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 1
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 1
+// bits[23:20] FreeTok = 6
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,
+      (DEGREE_RANGE_0 (4, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),     // 4 Socket, fully populated.
+      PACKAGE_TYPE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00611555,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 2
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 0
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 0
+// bits[23:20] FreeTok = 8
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C32_ALL                     // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (COUNT_RANGE_ALL | COUNT_RANGE_NONE),
+      PACKAGE_TYPE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00800756,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 2
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 1
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 1
+// bits[23:20] FreeTok = 8
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C32_ALL                     // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (COUNT_RANGE_ALL | COUNT_RANGE_NONE),
+      PACKAGE_TYPE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00811756,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 3
+// bits[7:4] ProbeTok = 3
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000033,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 5
+// bits[7:4] ProbeTok = 1
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,              // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000015,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// All non probe filter configs
+// bits[3:0] RspTok = 3
+// bits[7:4] ProbeTok = 3
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000033,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 4
+// bits[7:4] ProbeTok = 1
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,              // Features
+      (DEGREE_RANGE_0 (COUNT_RANGE_LOW, 1) | DEGREE_RANGE_1 (4, COUNT_RANGE_HIGH)),     // 2 Socket, half populated, or 4 Socket, fully populated.
+      PACKAGE_TYPE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000014,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 5
+// bits[7:4] ProbeTok = 1
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,              // Features
+      (DEGREE_RANGE_0 (2, 2) | DEGREE_RANGE_1 (3, 3)),     // 2 Socket, fully populated, or 4 Socket, half populated.
+      PACKAGE_TYPE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000015,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 5
+// bits[7:4] ProbeTok = 1
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C32_ALL                     // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000015,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 0
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      (COUNT_RANGE_ALL | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      HT_HOST_FEAT_GANGED,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x000000AA,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 1
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 1
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 1
+// bits[19:18] PReqTok1 = 1
+// bits[21:20] RspTok1 = 1
+// bits[23:22] ProbeTok1= 1
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (COUNT_RANGE_LOW, 1) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      HT_HOST_FEAT_UNGANGED,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x00550055,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 1
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 1
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 1
+// bits[19:18] PReqTok1 = 1
+// bits[21:20] RspTok1 = 1
+// bits[23:22] ProbeTok1= 1
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (3, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      HT_HOST_FEAT_UNGANGED,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x00550055,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 1
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 1
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 0
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 1
+// bits[17:16] ReqTok1 = 1
+// bits[19:18] PReqTok1 = 1
+// bits[21:20] RspTok1 = 1
+// bits[23:22] ProbeTok1= 1
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (2, 2) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      HT_HOST_FEAT_UNGANGED,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x00554055,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 0
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (COUNT_RANGE_LOW, 2) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      HT_HOST_FEAT_NONCOHERENT,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000012A,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (COUNT_RANGE_LOW, 2) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x000001A6,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (COUNT_RANGE_LOW, 2) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROBEFILTER,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000016A,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 1
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 1
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 1
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 1
+// bits[19:18] PReqTok1 = 1
+// bits[21:20] RspTok1 = 1
+// bits[23:22] ProbeTok1= 1
+// bits[24] IsocReqTok1 = 1
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (COUNT_RANGE_LOW, 1) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_UNGANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x01550155,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 1
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 1
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 1
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 1
+// bits[19:18] PReqTok1 = 1
+// bits[21:20] RspTok1 = 1
+// bits[23:22] ProbeTok1= 1
+// bits[24] IsocReqTok1 = 1
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (3, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_UNGANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x01550155,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 0
+// bits[9:8] IsocReqTok0 = 2
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (3, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      HT_HOST_FEAT_NONCOHERENT,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000022A,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 1
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 1
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 1
+// bits[17:16] ReqTok1 = 1
+// bits[19:18] PReqTok1 = 1
+// bits[21:20] RspTok1 = 1
+// bits[23:22] ProbeTok1= 1
+// bits[24] IsocReqTok1 = 1
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (2, 2) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_UNGANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x01554155,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (3, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x000001A6,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 =1
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (3, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),
+      PERFORMANCE_PROBEFILTER,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x00000196,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 0
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 3
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C32_ALL                     // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_NFCM) },  // platformFeatures
+    {{
+      (COUNT_RANGE_ALL | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      HT_HOST_FEATURES_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000C0AA,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 0
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 2
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C32_ALL                     // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      (COUNT_RANGE_ALL | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      HT_HOST_FEAT_NONCOHERENT,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000812A,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 2
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C32_ALL                     // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_MULTI_LINK | AMD_PF_IOMMU) },  // platformFeatures
+    {{
+      (COUNT_RANGE_ALL | COUNT_RANGE_NONE),
+      PERFORMANCE_PROFILE_ALL,
+      HT_HOST_FEAT_COHERENT,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x000081AA,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10MultiLinkPciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10MultiLinkPciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10MultiLinkPciRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PackageType.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PackageType.h
new file mode 100644
index 0000000000..b8a3fe2019
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PackageType.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Package Type Definitions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _F10_PACKAGE_TYPE_H_
+#define _F10_PACKAGE_TYPE_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+// Below equates are defined to cooperate with LibAmdGetPackageType.
+#define PACKAGE_TYPE_FR2_FR5_FR6            (1 << 0)
+#define PACKAGE_TYPE_AM2R2_AM3              (1 << 1)
+#define PACKAGE_TYPE_S1G3_S1G4              (1 << 2)
+#define PACKAGE_TYPE_G34                    (1 << 3)
+#define PACKAGE_TYPE_ASB2                   (1 << 4)
+#define PACKAGE_TYPE_C32                    (1 << 5)
+
+#define PACKAGE_TYPE_FR2                    PACKAGE_TYPE_FR2_FR5_FR6
+#define PACKAGE_TYPE_FR5                    PACKAGE_TYPE_FR2_FR5_FR6
+#define PACKAGE_TYPE_FR6                    PACKAGE_TYPE_FR2_FR5_FR6
+#define PACKAGE_TYPE_S1G3                   PACKAGE_TYPE_S1G3_S1G4
+#define PACKAGE_TYPE_S1G4                   PACKAGE_TYPE_S1G3_S1G4
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+#endif  // _F10_PACKAGE_TYPE_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmAsymBoostInit.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmAsymBoostInit.c
new file mode 100644
index 0000000000..8c31a4ded2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmAsymBoostInit.c
@@ -0,0 +1,176 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Asymmetric Boost Initialization
+ *
+ * Performs the "BIOS Configuration for Asymmetric Boost" as
+ * described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF10PowerMgmt.h"
+#include "F10PmAsymBoostInit.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_F10PMASYMBOOSTINIT_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+SetAsymBoost (
+  IN       VOID *AsymBoostRegister,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 10h core 0 entry point for performing the "Asymmetric Boost
+ * Configuration" algorithm.
+ *
+ * The algorithm is as follows:
+ *    // Determine whether the processor support boost
+ *    if (CPUID CPUID Fn8000_0007[CPB]==1)&& CPUID Fn8000_0008[NC]==5) {
+ *        Core0 MSRC001_0064[CpuFid] += F3x10C[AsymmetricBoostCore0]
+ *        Core1 MSRC001_0064[CpuFid] += F3x10C[AsymmetricBoostCore1]
+ *        Core2 MSRC001_0064[CpuFid] += F3x10C[AsymmetricBoostCore2]
+ *        Core3 MSRC001_0064[CpuFid] += F3x10C[AsymmetricBoostCore3]
+ *        Core4 MSRC001_0064[CpuFid] += F3x10C[AsymmetricBoostCore4]
+ *        Core5 MSRC001_0064[CpuFid] += F3x10C[AsymmetricBoostCore5]
+ *    }
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParamsPtr       Service related parameters (unused).
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F10PmAsymBoostInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  AP_TASK                 TaskPtr;
+  UINT32                  LocalPciRegister;
+  PCI_ADDR                PciAddress;
+  CPUID_DATA              CpuidData;
+
+  // Check if CPB is supported. if yes, skip boosted p-state.
+  LibAmdCpuidRead (AMD_CPUID_APM, &CpuidData, StdHeader);
+  if (((CpuidData.EDX_Reg & 0x00000200) >> 9) == 1) {
+    LibAmdCpuidRead (CPUID_LONG_MODE_ADDR, &CpuidData, StdHeader);
+    if ((CpuidData.ECX_Reg & 0x000000FF) == 5) {
+      OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+      // Read F3x10C [Boost Offset]
+      PciAddress.AddressValue = F3x10C_ADDR;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+      TaskPtr.FuncAddress.PfApTaskI = SetAsymBoost;
+      TaskPtr.ExeFlags = WAIT_FOR_CORE;
+      TaskPtr.DataTransfer.DataTransferFlags = 0;
+      TaskPtr.DataTransfer.DataSizeInDwords = 1;
+      TaskPtr.DataTransfer.DataPtr = &LocalPciRegister;
+      ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set Asymmetric Boost.
+ *
+ * This function set Asymmetric Boost.
+ *
+ * @param[in]  AsymBoostRegister Contains the value of Asymmetric Boost register
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+STATIC
+SetAsymBoost (
+  IN       VOID *AsymBoostRegister,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8  ControlByte;
+  UINT32 Core;
+  UINT32 Ignored;
+  UINT64 MsrValue;
+  AGESA_STATUS IgnoredSts;
+
+  IdentifyCore (StdHeader, &Ignored, &Ignored, &Core, &IgnoredSts);
+  ControlByte = (UINT8) ((Core & 0xFF) * 2);
+  LibAmdMsrRead (MSR_PSTATE_0, &MsrValue, StdHeader);
+  // Bits 5:0
+  ((PSTATE_MSR *) &MsrValue)->CpuFid += ((*(UINT32*) AsymBoostRegister >> ControlByte) & 0x3);
+  LibAmdMsrWrite (MSR_PSTATE_0, &MsrValue, StdHeader);
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmAsymBoostInit.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmAsymBoostInit.h
new file mode 100644
index 0000000000..d03d676a81
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmAsymBoostInit.h
@@ -0,0 +1,78 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Asymmetric Boost Initialization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F10_ASYM_BOOST_H_
+#define _CPU_F10_ASYM_BOOST_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F10PmAsymBoostInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F10_ASYM_BOOST_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c
new file mode 100644
index 0000000000..0fc1631ca6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c
@@ -0,0 +1,243 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Dual-plane Only Support
+ *
+ * Performs the "BIOS Configuration for Dual-plane Only Support" as
+ * described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF10PowerMgmt.h"
+#include "F10PmDualPlaneOnlySupport.h"
+#include "F10PackageType.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_F10PMDUALPLANEONLYSUPPORT_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT32
+STATIC
+SetPstateMSR (
+  IN       VOID  *CPB,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 10h core 0 entry point for performing the "Dual-plane Only Support" algorithm.
+ *
+ * The algorithm is as follows:
+ *    // Determine whether algorithm applies to this processor
+ *    if (CPUID Fn8000_0001_EBX[PkgType] == 0001b && (revision C or E) {
+ *        // Determine whether processor is supported in this infrastructure
+ *        if (((F3x1FC[DualPlaneOnly] == 1) && (this is a dual-plane platform))
+ *            || ((F3x1FC[AM3r2Only] == 1) && (this is an AM3r2 platform))) {
+ *            // Fixup the P-state MSRs
+ *            for (each core in the system) {
+ *            if (CPUID Fn8000_0007[CPB]) {
+ *                Copy MSRC001_0065 as MinPstate;
+ *                Copy MSRC001_0068 to MSRC001_0065;
+ *                Copy MinPstate to MSRC001_0068;
+ *            } else {
+ *                Copy MSRC001_0068 to MSRC001_0064;
+ *                Program MSRC001_0068 = 0;
+ *            } // endif
+ *            for (each MSR in MSRC001_00[68:64]) {
+ *                if (value in MSRC001_00[68:64][IddValue] != 0) {
+ *                    Set PstateEn in current MSR to 1;
+ *                } // endif
+ *            } // endfor
+ *        } // endfor
+ *        Set F3xDC[PstateMaxVal] = lowest-performance enabled P-state;
+ *        Set F3xA8[PopDownPstate] = lowest-performance enabled P-state;
+ *        Set F3x64[HtcPstateLimit] = lowest-performance enabled P-state;
+ *        } // endif
+ *    } // endif
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParamsPtr       Service related parameters (unused).
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F10PmDualPlaneOnlySupport (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  AP_TASK                 TaskPtr;
+  UINT32                  CPB;
+  UINT32                  Core;
+  UINT32                  Pvimode;
+  UINT32                  LowestPsEn;
+  UINT32                  LocalPciRegister;
+  UINT32                  ActiveCores;
+  UINT32                  ProcessorPackageType;
+  PCI_ADDR                PciAddress;
+  CPUID_DATA              CpuidData;
+  CPU_LOGICAL_ID          LogicalId;
+
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+
+  // get the package type
+  ProcessorPackageType = LibAmdGetPackageType (StdHeader);
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+  if (((LogicalId.Revision & (AMD_F10_Cx | AMD_F10_Ex)) != 0) && ((ProcessorPackageType & PACKAGE_TYPE_AM2R2_AM3) != 0)) {
+    PciAddress.AddressValue = PRCT_INFO_PCI_ADDR;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    PciAddress.AddressValue = PW_CTL_MISC_PCI_ADDR;
+    LibAmdPciRead (AccessWidth32, PciAddress, &Pvimode, StdHeader);
+    if ((((LocalPciRegister & 0x80000000) != 0) && (((POWER_CTRL_MISC_REGISTER *) &Pvimode)->PviMode == 0))
+      || ((LocalPciRegister & 0x04000000) != 0)) {
+      CPB = 0;
+      LibAmdCpuidRead (AMD_CPUID_APM, &CpuidData, StdHeader);
+      if (((CpuidData.EDX_Reg & 0x00000200) >> 9) == 1) {
+        CPB = 1;
+      }
+
+      TaskPtr.FuncAddress.PfApTaskIO = SetPstateMSR;
+      TaskPtr.ExeFlags = TASK_HAS_OUTPUT | WAIT_FOR_CORE;
+      TaskPtr.DataTransfer.DataTransferFlags = 0;
+      TaskPtr.DataTransfer.DataSizeInDwords = 1;
+      TaskPtr.DataTransfer.DataPtr = &CPB;
+
+      GetActiveCoresInCurrentSocket (&ActiveCores, StdHeader);
+      for (Core = 1; Core < (UINT8) ActiveCores; ++Core) {
+        ApUtilRunCodeOnSocketCore ((UINT8)0, (UINT8)Core, &TaskPtr, StdHeader);
+      }
+      LowestPsEn = ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, (VOID *) CpuEarlyParamsPtr);
+
+      PciAddress.AddressValue = CPTC2_PCI_ADDR;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal = LowestPsEn;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+      PciAddress.AddressValue = POPUP_PSTATE_PCI_ADDR;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((POPUP_PSTATE_REGISTER *) &LocalPciRegister)->PopDownPstate = LowestPsEn;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+      PciAddress.AddressValue = HTC_PCI_ADDR;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((HTC_REGISTER *) &LocalPciRegister)->HtcPstateLimit = LowestPsEn;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    }
+  }
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set P-State MSR.
+ *
+ * This function set the P-state MSRs per each core in the system.
+ *
+ * @param[in]  CPB               Contains the value of Asymmetric Boost register
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ * @return         Return the lowest-performance enabled P-state
+ */
+UINT32
+STATIC
+SetPstateMSR (
+  IN       VOID  *CPB,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 dtemp;
+  UINT32 LowestPsEn;
+  UINT64 MsrValue;
+  UINT64 MinMsrValue;
+
+  if (*(UINT32*) CPB != 0) {
+    LibAmdMsrRead (MSR_PSTATE_1, &MinMsrValue, StdHeader);
+    LibAmdMsrRead (MSR_PSTATE_4, &MsrValue, StdHeader);
+    LibAmdMsrWrite (MSR_PSTATE_1, &MsrValue, StdHeader);
+    LibAmdMsrWrite (MSR_PSTATE_4, &MinMsrValue, StdHeader);
+  } else {
+    LibAmdMsrRead (MSR_PSTATE_4, &MsrValue, StdHeader);
+    LibAmdMsrWrite (MSR_PSTATE_0, &MsrValue, StdHeader);
+    MsrValue = 0;
+    LibAmdMsrWrite (MSR_PSTATE_4, &MsrValue, StdHeader);
+  }
+
+  LowestPsEn = 0;
+  for (dtemp = MSR_PSTATE_0; dtemp <= MSR_PSTATE_4; dtemp++) {
+    LibAmdMsrRead (dtemp, &MsrValue, StdHeader);
+    if (((PSTATE_MSR *) &MsrValue)->IddValue != 0) {
+      MsrValue = MsrValue | BIT63;
+      LibAmdMsrWrite (dtemp, &MsrValue, StdHeader);
+      LowestPsEn =  dtemp - MSR_PSTATE_0;
+    }
+  }
+  return (LowestPsEn);
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.h
new file mode 100644
index 0000000000..53ba3995a7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.h
@@ -0,0 +1,78 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 BIOS Configuration for Dual-plane Only Support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F10_DUAL_PLANE_ONLY_SUPPORT_H_
+#define _CPU_F10_DUAL_PLANE_ONLY_SUPPORT_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F10PmDualPlaneOnlySupport (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F10_DUAL_PLANE_ONLY_SUPPORT_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbCofVidInit.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbCofVidInit.c
new file mode 100644
index 0000000000..515484cfdf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbCofVidInit.c
@@ -0,0 +1,296 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 NB COF VID Initialization
+ *
+ * Performs the "BIOS Northbridge COF and VID Configuration" as
+ * described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuApicUtilities.h"
+#include "OptionMultiSocket.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF10Utilities.h"
+#include "F10PmNbCofVidInit.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_F10PMNBCOFVIDINIT_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/// Structure used for performing the steps outlined in
+/// the NB COFVID configuration sequence
+typedef struct {
+  UINT8   NewNbVid;           ///< Destination NB VID code
+  BOOLEAN NbVidUpdateAll;     ///< Status of NbVidUpdateAll
+} NB_COF_VID_INIT_WARM;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+PmNbCofVidInitP0P1Core (
+  IN       VOID *NewNbVid,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+PmNbCofVidInitWarmCore (
+  IN       VOID *FunctionData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 10h core 0 entry point for performing the "Northbridge COF and
+ * VID Configuration" algorithm.
+ *
+ * The steps are as follows:
+ *    1. Determine if the algorithm is necessary by checking if all NB FIDs
+ *       match in the coherent fabric.  If so, check to see if NbCofVidUpdate
+ *       is zero for all CPUs.  If that is also true, no further steps are
+ *       necessary.  If not + cold reset, proceed to step 2.  If not + warm
+ *       reset, proceed to step 8.
+ *    2. Determine NewNbVid & NewNbFid.
+ *    3. Copy Startup Pstate settings to P0/P1 MSRs on all local cores.
+ *    4. Copy NewNbVid to P0 NbVid on all local cores.
+ *    5. Transition to P1 on all local cores.
+ *    6. Transition to P0 on local core 0 only.
+ *    7. Copy NewNbFid to F3xD4[NbFid], set NbFidEn, and issue a warm reset.
+ *    8. Update all enabled Pstate MSRs' NbVids according to NbVidUpdateAll
+ *       on all local cores.
+ *    9. Transition to Startup Pstate on all local cores.
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParamsPtr       Service related parameters (unused).
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F10PmNbCofVidInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  BOOLEAN   PerformNbCofVidCfg;
+  BOOLEAN   NotUsed;
+  BOOLEAN   SystemNbCofsMatch;
+  UINT8     NewNbFid;
+  UINT8     NewNbVid;
+  UINT32    Core;
+  UINT32    SystemNbCof;
+  UINT32    AndMask;
+  UINT32    OrMask;
+  UINT32    Ignored;
+  UINT32    NewNbVoltage;
+  UINT32    FrequencyDivisor;
+  WARM_RESET_REQUEST Request;
+  AP_TASK   TaskPtr;
+  PCI_ADDR  PciAddress;
+  NB_COF_VID_INIT_WARM FunctionData;
+
+  PerformNbCofVidCfg = TRUE;
+  OptionMultiSocketConfiguration.GetSystemNbPstateSettings ((UINT32) 0, &CpuEarlyParamsPtr->PlatformConfig, &SystemNbCof, &FrequencyDivisor, &SystemNbCofsMatch, &NotUsed, StdHeader);
+  if (SystemNbCofsMatch) {
+    if (!OptionMultiSocketConfiguration.GetSystemNbCofVidUpdate (StdHeader)) {
+      PerformNbCofVidCfg = FALSE;
+    }
+  }
+  if (PerformNbCofVidCfg) {
+    OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+
+    GetCurrentCore (&Core, StdHeader);
+    ASSERT (Core == 0);
+
+    // get NewNbVid
+    FamilySpecificServices->GetNbPstateInfo (FamilySpecificServices,
+                                             &CpuEarlyParamsPtr->PlatformConfig,
+                                             &PciAddress,
+                                             (UINT32) 0,
+                                             &Ignored,
+                                             &Ignored,
+                                             &NewNbVoltage,
+                                             StdHeader);
+    ASSERT (((1550000 - NewNbVoltage) % 12500) == 0);
+    NewNbVid = (UINT8) ((1550000 - NewNbVoltage) / 12500);
+    ASSERT (NewNbVid < 0x80);
+
+    if (!(IsWarmReset (StdHeader))) {
+
+      // determine NewNbFid
+      NewNbFid = (UINT8) ((SystemNbCof / 200) - 4);
+
+      TaskPtr.FuncAddress.PfApTaskI = PmNbCofVidInitP0P1Core;
+      TaskPtr.DataTransfer.DataSizeInDwords = 1;
+      TaskPtr.DataTransfer.DataPtr = &NewNbVid;
+      TaskPtr.DataTransfer.DataTransferFlags = 0;
+      TaskPtr.ExeFlags = 0;
+      ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+
+      // Transition core 0 to P0 and wait for change to complete
+      FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) 0, (BOOLEAN) TRUE, StdHeader);
+
+      PciAddress.Address.Register = CPTC0_REG;
+      AndMask = 0xFFFFFFFF;
+      ((CLK_PWR_TIMING_CTRL_REGISTER *) &AndMask)->NbFid = 0;
+      OrMask = 0x00000000;
+      ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->NbFid = NewNbFid;
+      ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->NbFidEn = 1;
+      OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+
+      // warm reset request
+      GetWarmResetFlag (StdHeader, &Request);
+      Request.RequestBit = TRUE;
+      Request.StateBits = Request.PostStage - 1;
+      SetWarmResetFlag (StdHeader, &Request);
+    } else {
+      // warm reset path
+
+      FunctionData.NewNbVid = NewNbVid;
+      FamilySpecificServices->IsNbCofInitNeeded (FamilySpecificServices, &PciAddress, &FunctionData.NbVidUpdateAll, StdHeader);
+
+      TaskPtr.FuncAddress.PfApTaskI = PmNbCofVidInitWarmCore;
+      TaskPtr.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (NB_COF_VID_INIT_WARM);
+      TaskPtr.DataTransfer.DataPtr = &FunctionData;
+      TaskPtr.DataTransfer.DataTransferFlags = 0;
+      TaskPtr.ExeFlags = WAIT_FOR_CORE;
+      ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+    }
+  } // skip whole algorithm
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Cold reset support routine for F10PmNbCofVidInit.
+ *
+ * This function implements steps 3, 4, & 5 on each core.
+ *
+ * @param[in]  NewNbVid           NewNbVid determined by core 0 in step 2.
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+PmNbCofVidInitP0P1Core (
+  IN       VOID *NewNbVid,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8  NumBoostStates;
+  UINT32 MsrAddress;
+  UINT64 LocalMsrRegister;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  NumBoostStates = F10GetNumberOfBoostedPstatesOnCore (StdHeader);
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+  MsrAddress = (UINT32) ((((COFVID_STS_MSR *) &LocalMsrRegister)->StartupPstate) + PS_REG_BASE);
+  LibAmdMsrRead (MsrAddress, &LocalMsrRegister, StdHeader);
+  LibAmdMsrWrite ((UINT32) (PS_REG_BASE + 1 + NumBoostStates), &LocalMsrRegister, StdHeader);
+  ((PSTATE_MSR *) &LocalMsrRegister)->NbVid = *(UINT8 *) NewNbVid;
+  LibAmdMsrWrite (PS_REG_BASE + NumBoostStates, &LocalMsrRegister, StdHeader);
+  FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) 1, (BOOLEAN) FALSE, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Warm reset support routine for F10PmNbCofVidInit.
+ *
+ * This function implements steps 8 & 9 on each core.
+ *
+ * @param[in]  FunctionData       Contains NewNbVid determined by core 0 in step
+ *                                2, and NbVidUpdateAll.
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+PmNbCofVidInitWarmCore (
+  IN       VOID *FunctionData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 MsrAddress;
+  UINT64 LocalMsrRegister;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  for (MsrAddress = PS_REG_BASE; MsrAddress <= PS_MAX_REG; MsrAddress++) {
+    LibAmdMsrRead (MsrAddress, &LocalMsrRegister, StdHeader);
+    if (((PSTATE_MSR *) &LocalMsrRegister)->IddValue != 0) {
+      if ((((PSTATE_MSR *) &LocalMsrRegister)->NbDid == 0) || ((NB_COF_VID_INIT_WARM *) FunctionData)->NbVidUpdateAll) {
+        ((PSTATE_MSR *) &LocalMsrRegister)->NbVid = ((NB_COF_VID_INIT_WARM *) FunctionData)->NewNbVid;
+        LibAmdMsrWrite (MsrAddress, &LocalMsrRegister, StdHeader);
+      }
+    }
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbCofVidInit.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbCofVidInit.h
new file mode 100644
index 0000000000..94aad6dcf8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbCofVidInit.h
@@ -0,0 +1,77 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 NB COF VID Initialization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F10_PM_NB_COF_VID_INIT_H_
+#define _CPU_F10_PM_NB_COF_VID_INIT_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F10PmNbCofVidInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F10_PM_NB_COF_VID_INIT_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbPstateInit.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbPstateInit.c
new file mode 100644
index 0000000000..bf3f4bd6e4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbPstateInit.c
@@ -0,0 +1,185 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 NB Pstate Initialization
+ *
+ * Performs the action described in F3x1F0[NbPstate] as
+ * described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuApicUtilities.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "F10PmNbPstateInit.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_F10PMNBPSTATEINIT_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/// Structure used for modifying the P-state
+/// MSRs on fuse enable CPUs.
+typedef struct {
+  UINT8   NbVid1;             ///< Destination NB VID code
+  UINT8   NbPstate;           ///< Status of NbVidUpdateAll
+} NB_PSTATE_INIT;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+PmNbPstateInitCore (
+  IN       VOID *NbPstateParams,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 10h core 0 entry point for performing the actions described in the
+ * description of F3x1F0[NbPstate].
+ *
+ * If F3x1F0[NbPstate] is non zero, it specifies the highest performance
+ * P-state in which to enable NbDid.  Each core must loop through their
+ * P-state MSRs, enabling NbDid and changing NbVid to a lower voltage.
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParamsPtr       Service related parameters (unused).
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F10PmNbPstateInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT32         Core;
+  UINT32         LocalPciRegister;
+  AP_TASK        TaskPtr;
+  PCI_ADDR       PciAddress;
+  NB_PSTATE_INIT ApParams;
+
+  if (FamilySpecificServices->IsNbPstateEnabled (FamilySpecificServices, &CpuEarlyParamsPtr->PlatformConfig, StdHeader)) {
+    if (CpuEarlyParamsPtr->PlatformConfig.PlatformProfile.PlatformPowerPolicy == BatteryLife) {
+      OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+      GetCurrentCore (&Core, StdHeader);
+      ASSERT (Core == 0);
+
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = 0x1F0;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      if ((LocalPciRegister & 0x00070000) != 0) {
+        ApParams.NbPstate = (UINT8) ((LocalPciRegister & 0x00070000) >> 16);
+        ASSERT (ApParams.NbPstate < NM_PS_REG);
+
+        PciAddress.Address.Function = FUNC_4;
+        PciAddress.Address.Register = 0x1F4;
+        LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+        ApParams.NbVid1 = (UINT8) ((LocalPciRegister & 0x00003F80) >> 7);
+
+        TaskPtr.FuncAddress.PfApTaskI = PmNbPstateInitCore;
+        TaskPtr.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (NB_PSTATE_INIT);
+        TaskPtr.DataTransfer.DataPtr = &ApParams;
+        TaskPtr.DataTransfer.DataTransferFlags = 0;
+        TaskPtr.ExeFlags = WAIT_FOR_CORE;
+        ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+
+      }
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F10PmNbPstateInit.
+ *
+ * This function modifies NbVid and NbDid on each core.
+ *
+ * @param[in]  NbPstateParams     Appropriate NbVid1 and NbPstate as determined by core 0.
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+PmNbPstateInitCore (
+  IN       VOID *NbPstateParams,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 MsrAddress;
+  UINT64 LocalMsrRegister;
+
+  for (MsrAddress = (PS_REG_BASE + ((NB_PSTATE_INIT *) NbPstateParams)->NbPstate); MsrAddress <= PS_MAX_REG; MsrAddress++) {
+    LibAmdMsrRead (MsrAddress, &LocalMsrRegister, StdHeader);
+    if (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1) {
+      ((PSTATE_MSR *) &LocalMsrRegister)->NbDid = 1;
+      ((PSTATE_MSR *) &LocalMsrRegister)->NbVid = ((NB_PSTATE_INIT *) NbPstateParams)->NbVid1;
+      LibAmdMsrWrite (MsrAddress, &LocalMsrRegister, StdHeader);
+    }
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbPstateInit.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbPstateInit.h
new file mode 100644
index 0000000000..1701ee4ea0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmNbPstateInit.h
@@ -0,0 +1,77 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 NB P-State Initialization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F10_PM_NB_PSTATE_INIT_H_
+#define _CPU_F10_PM_NB_PSTATE_INIT_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F10PmNbPstateInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F10_PM_NB_PSTATE_INIT_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10SingleLinkPciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10SingleLinkPciTables.c
new file mode 100644
index 0000000000..7a3a3ec6eb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10SingleLinkPciTables.c
@@ -0,0 +1,2251 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 PCI tables in Recommended Settings for Single Link Processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 59564 $   @e \$Date: 2011-09-26 12:33:51 -0600 (Mon, 26 Sep 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_F10SINGLELINKPCITABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10SingleLinkPciRegisters[] =
+{
+// F0x68 - Link Transaction Control
+// bit[14:13], BufPriRel = 01b
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                     // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68),  // Address
+      0x00002000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+// F0x68 - Link Transaction Control
+// bit[24], DispRefModeEn = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68),  // Address
+      0x00000000,                           // regData
+      0x01000000,                           // regMask
+    }}
+  },
+// F0x68 - Link Transaction Control
+// bit[24], DispRefModeEn = 1 for UMA, but can only set it on the warm reset.
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    {AMD_PF_UMA},                     // platform Features
+    {{
+      PERFORMANCE_IS_WARM_RESET,
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68),  // Address
+      0x01000000,                           // regData
+      0x01000000,                           // regMask
+    }}
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 2
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 1
+  // 17:16 NpReqData: 1
+  // 15:12 ProbeCmd: 0
+  // 11:8 RspCmd: 2
+  // 7:5 PReq: 4
+  // 4:0 NpReqCmd: 18
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_NFCM) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // Link Features
+      0x10,                                 // Address
+      0x04850292,                           // Data
+      0x0FFFFFFF                            // Mask
+    }},
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 2
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 1
+  // 17:16 NpReqData: 1
+  // 15:12 ProbeCmd: 0
+  // 11:8 RspCmd: 2
+  // 7:5 PReq: 4
+  // 4:0 NpReqCmd: 18
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // Link Features
+      0x10,                                 // Address
+      0x04850292,                           // Data
+      0x0FFFFFFF                            // Mask
+    }},
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 2
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 1
+  // 17:16 NpReqData: 1
+  // 15:12 ProbeCmd: 0
+  // 11:8 RspCmd: 2
+  // 7:5 PReq: 3
+  // 4:0 NpReqCmd: 11
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // Link Features
+      0x10,                                 // Address
+      0x0485026B,                           // Data
+      0x0FFFFFFF                            // Mask
+    }},
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 2
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 1
+  // 17:16 NpReqData: 1
+  // 15:12 ProbeCmd: 0
+  // 11:8 RspCmd: 2
+  // 7:5 PReq: 6
+  // 4:0 NpReqCmd: 15
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IFCM) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // Link Features
+      0x10,                                 // Address
+      0x008502CF,                           // Data
+      0x0FFFFFFF                            // Mask
+    }},
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 0
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 1
+  // 17:16 NpReqData: 1
+  // 15:12 ProbeCmd: 0
+  // 11:8 RspCmd: 2
+  // 7:5 PReq: 6
+  // 4:0 NpReqCmd: 15
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IOMMU) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // Link Features
+      0x10,                                 // Address
+      0x808502CF,                           // Data
+      0x0FFFFFFF                            // Mask
+    }},
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 0
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 0
+  // 18:16 IsocNpReqCmd: 0
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_NFCM) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // Link Features
+      0x14,                                 // Address
+      0x00000000,                           // Data
+      0x1FFF0000                            // Mask
+    }},
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 0
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 0
+  // 18:16 IsocNpReqCmd: 0
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // Link Features
+      0x14,                                 // Address
+      0x00000000,                           // Data
+      0x1FFF0000                            // Mask
+    }},
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 0
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 1
+  // 18:16 IsocNpReqCmd: 7
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // Link Features
+      0x14,                                 // Address
+      0x000F0000,                           // Data
+      0x1FFF0000                            // Mask
+    }},
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 0
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 0
+  // 18:16 IsocNpReqCmd: 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IFCM) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // Link Features
+      0x14,                                 // Address
+      0x00010000,                           // Data
+      0x1FFF0000                            // Mask
+    }},
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 0
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 0
+  // 18:16 IsocNpReqCmd: 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IOMMU) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // Link Features
+      0x14,                                 // Address
+      0x00010000,                           // Data
+      0x1FFF0000                            // Mask
+    }},
+  },
+// F0x170 - Link Extended Control Register - Link 0, sublink 0
+// bit[8] LS2En = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                     // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x170), // Address
+      0x00000100,                           // regData
+      0x00000100,                           // regMask
+    }}
+  },
+// F2x118 - Memory Controller Configuration Low Register
+// bits[13:12] MctPriIsoc = 10b
+// bits[31:28] MctVarPriCntLmt = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_UMA | AMD_PF_UMA_IFCM) },        // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x118),  // Address
+      0x00002000,                           // regData
+      0xF0003000,                           // regMask
+    }}
+  },
+// F2x118 - Memory Controller Configuration Low Register
+// bits[13:12] MctPriIsoc = 00b
+// bits[31:28] MctVarPriCntLmt = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IOMMU) },        // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x118),  // Address
+      0x00000000,                           // regData
+      0xF0000000,                           // regMask
+    }}
+  },
+// F2x118 - Memory Controller Configuration Low Register
+// bits[13:12] MctPriIsoc = 11b
+// bits[31:28] MctVarPriCntLmt = 1
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_UMA | AMD_PF_UMA_IFCM) },       // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x118),  // Address
+      0x10003000,                           // regData
+      0xF0003000,                           // regMask
+    }}
+  },
+// F2x[1,0]90 - DRAM Configuration Low Register
+// bits [10] BurstLength32  0
+// It is okay to write both channels, if one is disabled, this bit has no effect on that channel.
+// If the channels are ganged for 128 bit operation, the memory init code will resolve any conflict with this setting.
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_UMA | AMD_PF_UMA_IFCM) },        // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x90),  // Address
+      0x00000000,                           // regData
+      0x00000400,                           // regMask
+    }}
+  },
+// F2x[1,0]90 - DRAM Configuration Low Register
+// bits [10] BurstLength32 = 0
+// It is okay to write both channels, if one is disabled, this bit has no effect on that channel.
+// If the channels are ganged for 128 bit operation, the memory init code will resolve any conflict with this setting.
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_UMA | AMD_PF_UMA_IFCM) },        // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x190),  // Address
+      0x00000000,                           // regData
+      0x00000400,                           // regMask
+    }}
+  },
+// F2x[1,0]90 - DRAM Configuration Low Register
+// bits [10] BurstLength32 = 1
+// It is okay to write both channels, if one is disabled, this bit has no effect on that channel.
+// If the channels are ganged for 128 bit operation, the memory init code will resolve any conflict with this setting.
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_UMA | AMD_PF_UMA_IFCM) },        // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x90),  // Address
+      0x00000400,                           // regData
+      0x00000400,                           // regMask
+    }}
+  },
+// F2x[1,0]90 - DRAM Configuration Low Register
+// bits [10] BurstLength32 = 1
+// It is okay to write both channels, if one is disabled, this bit has no effect on that channel.
+// If the channels are ganged for 128 bit operation, the memory init code will resolve any conflict with this setting.
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_UMA | AMD_PF_UMA_IFCM) },        // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x190),  // Address
+      0x00000400,                           // regData
+      0x00000400,                           // regMask
+    }}
+  },
+// F3x6C - Data Buffer Control
+// bits[2:0]   UpReqDBC = 2
+// bits[5:4]   DnReqDBC = 1
+// bits[7:6]   DnRspDBC = 1
+// bit[15]     DatBuf24 = 1
+// bits[18:16] UpRspDBC = 1
+// bits[30:28] IsocRspDBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_NFCM) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x6C),  // Address
+      0x00018052,                           // regData
+      0x700780F7,                           // regMask
+    }}
+  },
+// F3x6C - Data Buffer Control
+// bits[2:0]   UpReqDBC = 1
+// bits[5:4]   DnReqDBC = 1
+// bits[7:6]   DnRspDBC = 1
+// bit[15]     DatBuf24 = 1
+// bits[18:16] UpRspDBC = 1
+// bits[30:28] IsocRspDBC = 6
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x6C),  // Address
+      0x60018051,                           // regData
+      0x700780F7,                           // regMask
+    }}
+  },
+// F3x6C - Data Buffer Control
+// bits[2:0]   UpReqDBC = 2
+// bits[5:4]   DnReqDBC = 1
+// bits[7:6]   DnRspDBC = 1
+// bit[15]     DatBuf24 = 1
+// bits[18:16] UpRspDBC = 1
+// bits[30:28] IsocRspDBC = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IFCM) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x6C),  // Address
+      0x10018052,                           // regData
+      0x700780F7,                           // regMask
+    }}
+  },
+// F3x6C - Data Buffer Control
+// bits[2:0]   UpReqDBC = 1
+// bits[5:4]   DnReqDBC = 1
+// bits[7:6]   DnRspDBC = 1
+// bit[15]     DatBuf24 = 1
+// bits[18:16] UpRspDBC = 1
+// bits[30:28] IsocRspDBC = 6
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x6C),  // Address
+      0x60018051,                           // regData
+      0x700780F7,                           // regMask
+    }}
+  },
+// F3x6C - Data Buffer Control
+// bits[2:0]   UpReqDBC = 2
+// bits[5:4]   DnReqDBC = 1
+// bits[7:6]   DnRspDBC = 1
+// bit[15]     DatBuf24 = 1
+// bits[18:16] UpRspDBC = 1
+// bits[30:28] IsocRspDBC = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IOMMU) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x6C),  // Address
+      0x10018052,                           // regData
+      0x700780F7,                           // regMask
+    }}
+  },
+// F3x70 - SRI_to_XBAR Command Buffer Count
+// bits[2:0]   UpReqCBC = 3
+// bits[5:4]   DnReqCBC = 1
+// bits[7:6]   DnRspCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 1
+// bits[18:16] UpRspCBC = 4
+// bits[22:20] IsocReqCBC = 0
+// bits[26:24] IsocPreqCBC = 0
+// bits[30:28] IsocRspCBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_NFCM) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x70),  // Address
+      0x00041153,                           // regData
+      0x777777F7,                           // regMask
+    }}
+  },
+// F3x70 - SRI_to_XBAR Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[5:4]   DnReqCBC = 1
+// bits[7:6]   DnRspCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 1
+// bits[18:16] UpRspCBC = 2
+// bits[22:20] IsocReqCBC = 2
+// bits[26:24] IsocPreqCBC = 1
+// bits[30:28] IsocRspCBC = 6
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x70),  // Address
+      0x61221151,                           // regData
+      0x777777F7,                           // regMask
+    }}
+  },
+// F3x70 - SRI_to_XBAR Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[5:4]   DnReqCBC = 1
+// bits[7:6]   DnRspCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 1
+// bits[18:16] UpRspCBC = 2
+// bits[22:20] IsocReqCBC = 2
+// bits[26:24] IsocPreqCBC = 1
+// bits[30:28] IsocRspCBC = 6
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x70),  // Address
+      0x61221151,                           // regData
+      0x777777F7,                           // regMask
+    }}
+  },
+// F3x70 - SRI_to_XBAR Command Buffer Count
+// bits[2:0]   UpReqCBC = 3
+// bits[5:4]   DnReqCBC = 1
+// bits[7:6]   DnRspCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 1
+// bits[18:16] UpRspCBC = 4
+// bits[22:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[30:28] IsocRspCBC = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IFCM) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x70),  // Address
+      0x11141153,                           // regData
+      0x777777F7,                           // regMask
+    }}
+  },
+// F3x70 - SRI_to_XBAR Command Buffer Count
+// bits[2:0]   UpReqCBC = 3
+// bits[5:4]   DnReqCBC = 1
+// bits[7:6]   DnRspCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 1
+// bits[18:16] UpRspCBC = 5
+// bits[22:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 0
+// bits[30:28] IsocRspCBC = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IOMMU) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x70),  // Address
+      0x10151153,                           // regData
+      0x777777F7,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 1
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 0
+// bits[26:24] IsocPreqCBC = 0
+// bits[31:28] DRReqCBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_NFCM) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x00081111,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = 9
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x91180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = 9
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x91180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC =1
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 0
+// bits[31:28] DRReqCBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IOMMU) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x00181111,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = 8
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_PROFILE_ALL,  // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x81180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = 8
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) }, // platform Features
+    {{
+      PERFORMANCE_PROFILE_ALL,  // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x81180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = 7
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_PROFILE_ALL,  // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x71180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = 7
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) }, // platform Features
+    {{
+      PERFORMANCE_PROFILE_ALL,  // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x71180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = C
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xC1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = C
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) }, // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xC1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = B
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xB1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = A
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xA1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = B
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xB1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = A
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xA1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = F
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,        // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xF1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = F
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) }, // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,        // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xF1181111,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = B
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,        // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xB1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = B
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) }, // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,        // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xB1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = A
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,        // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xA1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = A
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) }, // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,        // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xA1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = E
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,        // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xE1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = E
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) }, // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,        // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xE1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = D
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,        // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xD1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 1
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = D
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) }, // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,        // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6-cores
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0xD1180101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[2:0]   UpReqCBC = 1
+// bits[6:4]   DnReqCBC = 0
+// bits[10:8]  UpPreqCBC = 1
+// bits[14:12] DnPreqCBC = 0
+// bits[19:16] ProbeCBC = 8
+// bits[23:20] IsocReqCBC = 8
+// bits[26:24] IsocPreqCBC = 1
+// bits[31:28] DRReqCBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IFCM) }, // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x01880101,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 20
+// bits[11:8] Sri2XbarFreeXreqCBC = 9
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 9
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_NFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00090914,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[4:0]  Xbar2SriFreeListCBC = 15
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080F,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[4:0]  Xbar2SriFreeListCBC = 15
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080F,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 12
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080C,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 12
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080C,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 9
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,              // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00070809,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 9
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B ,              // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00070809,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 17
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00070811,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 20
+// bits[11:8] Sri2XbarFreeXreqCBC = 9
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 9
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IOMMU) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00090914,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[4:0]  Xbar2SriFreeListCBC = 14
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080E,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[4:0]  Xbar2SriFreeListCBC = 14
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080E,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[4:0]  Xbar2SriFreeListCBC = 13
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080D,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// No Mct Variable Priority or 32 byte requests.
+// bits[4:0]  Xbar2SriFreeListCBC = 13
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080D,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 11
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080B,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 11
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080B,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 10
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080A,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 10
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080A,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 8
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,              // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00070808,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 8
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B ,              // Features
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00070808,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 7
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B,              // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00070807,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 7
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_REFRESH_REQUEST_32B ,              // Features
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00070807,                           // regData
+      0x007FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 16
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE),  // 5 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x00070810,                           // regData
+      0x707FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 15
+// bits[11:8] Sri2XbarFreeXreqCBC = 8
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 7
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IFCM) },  // platform Features
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE),  // 6 cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x0007080F,                           // regData
+      0x707FFF1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 22, 1-core without L3 cache is 22
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      PERFORMANCE_NO_L3_CACHE,
+      (CORE_RANGE_0 (1, 1) | COUNT_RANGE_NONE), // 1 core.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),      // Address
+      0x00000016,                               // regData
+      0x0000001F,                               // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 20, 2-core is 20
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      PERFORMANCE_NO_L3_CACHE,
+      (CORE_RANGE_0 (2, 2) | COUNT_RANGE_NONE), // 2 core.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),      // Address
+      0x00000014,                               // regData
+      0x0000001F,                               // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 18, 3-core without L3 cache is 18.
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      PERFORMANCE_NO_L3_CACHE,
+      (CORE_RANGE_0 (3, 3) | COUNT_RANGE_NONE), // 3 core.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),      // Address
+      0x00000012,                               // regData
+      0x0000001F,                               // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 14, 4-core without L3 cache is 16.
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      PERFORMANCE_NO_L3_CACHE,
+      (CORE_RANGE_0 (4, 4) | COUNT_RANGE_NONE), // 4 core.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),      // Address
+      0x00000010,                               // regData
+      0x0000001F,                               // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 14, 5-core without L3 cache is 14.
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      PERFORMANCE_NO_L3_CACHE,
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE), // 5 core.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),      // Address
+      0x0000000E,                               // regData
+      0x0000001F,                               // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]  Xbar2SriFreeListCBC = 12, 6-core without L3 cache is 12.
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      PERFORMANCE_NO_L3_CACHE,
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE), // 6 core.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),      // Address
+      0x0000000C,                               // regData
+      0x0000001F,                               // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 2
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 0
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 0
+// bits[23:20] FreeTok = 8
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_NFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00800756,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 2
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 3
+// bits[15:14] IsocPreqTok = 1
+// bits[17:16] IsocRspTok = 3
+// bits[23:20] FreeTok = 12
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00C37756,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 2
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 3
+// bits[15:14] IsocPreqTok = 1
+// bits[17:16] IsocRspTok = 3
+// bits[23:20] FreeTok = 12
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00C37756,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 2
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 2
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 3
+// bits[15:14] IsocPreqTok = 1
+// bits[17:16] IsocRspTok = 3
+// bits[23:20] FreeTok = 12
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00C37656,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0] UpReqTok = 2
+// bits[3:2] DnReqTok = 1
+// bits[5:4] UpPreqTokC = 1
+// bits[7:6] DnPreqTok = 1
+// bits[9:8] UpRspTok = 3
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 1
+// bits[15:14] IsocPreqTok = 1
+// bits[17:16] IsocRspTok = 1
+// bits[23:20] FreeTok = 8
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IOMMU) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00815756,                           // regData
+      0x00F3FFFF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 3
+// bits[7:4] ProbeTok = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_NFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000033,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 6
+// bits[7:4] ProbeTok = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000036,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 6
+// bits[7:4] ProbeTok = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000036,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 6
+// bits[7:4] ProbeTok = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000036,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 3
+// bits[7:4] ProbeTok = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IOMMU) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000033,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 0
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 3
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_NFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000C0AA,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 0
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 1
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 2
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x8000052A,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 0
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 1
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 2
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x8000052A,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 0
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 3
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IFCM) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000C0AA,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 0
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 1
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 2
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 3
+// bits[24] IsocReqTok1 = 0
+// bits[25] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_IOMMU) },  // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0500852A,                           // regData
+      0xC000FFFF,                           // regMask
+    }}
+  },
+  // F3x158 - Link to XCS Token Count Registers
+  // bits [3:0]LnkToXcsDRToken = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_NFCM | AMD_PF_IFCM | AMD_PF_IOMMU) },
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x158), // Address
+      0x00000000,
+      0x0000000F
+    }}
+  },
+  // F3x158 - Link to XCS Token Count Registers
+  // bits [3:0]LnkToXcsDRToken = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_UMA_IFCM | AMD_PF_UMA) },
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x158), // Address
+      0x00000003,
+      0x0000000F
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10SingleLinkPciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10SingleLinkPciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10SingleLinkPciRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlCacheFlushOnHalt.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlCacheFlushOnHalt.c
new file mode 100644
index 0000000000..ad3b28fff5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlCacheFlushOnHalt.c
@@ -0,0 +1,151 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Cache Flush On Halt Function.
+ *
+ * Contains code to initialize Cache Flush On Halt feature for Family 10h BL.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10/BL
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPostInit.h"
+#include "cpuFeatures.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_BL_F10BLCACHEFLUSHONHALT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          P U B L I C     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *    Enable BL-C Cpu Cache Flush On Halt Function
+ *
+ *    @param[in]       FamilySpecificServices   The current Family Specific Services.
+ *    @param[in]       EntryPoint               Timepoint designator.
+ *    @param[in]       PlatformConfig           Contains the runtime modifiable feature input data.
+ *    @param[in]       StdHeader                Config Handle for library, services.
+ */
+VOID
+SetF10BlCacheFlushOnHaltRegister (
+  IN       CPU_CFOH_FAMILY_SERVICES     *FamilySpecificServices,
+  IN       UINT64                       EntryPoint,
+  IN       PLATFORM_CONFIGURATION       *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS            *StdHeader
+  )
+{
+  UINT32       AndMask;
+  UINT32       OrMask;
+  UINT32       CoreCount;
+  PCI_ADDR     PciAddress;
+  CPU_LOGICAL_ID        CpuFamilyRevision;
+
+  if ((EntryPoint & CPU_FEAT_AFTER_POST_MTRR_SYNC) != 0) {
+    GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = CLOCK_POWER_TIMING_CTRL2_REG;
+    if (CpuFamilyRevision.Revision == AMD_F10_BL_C3) {
+      // F3xDC[25:19] = 04h
+      // F3xDC[18:16] = 111b
+      AndMask = 0xFC00FFFF;
+      OrMask = 0x00270000;
+    } else {
+      // F3xDC[25:19] = 28h
+      // F3xDC[18:16] = 111b
+      AndMask = 0xFC00FFFF;
+      OrMask = 0x01470000;
+
+      //For BL_C2 single Core, F3xDC[18:16] = 0
+      GetActiveCoresInCurrentSocket (&CoreCount, StdHeader);
+      if (CoreCount == 1) {
+        if (CpuFamilyRevision.Revision == AMD_F10_BL_C2) {
+          OrMask = 0x01400000;
+        }
+      }
+    }
+
+    // Get the Or Mask value from IDS
+    IDS_OPTION_HOOK (IDS_CACHE_FLUSH_HLT, &OrMask, StdHeader);
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); //F3xDC
+  }
+}
+
+CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F10BlCacheFlushOnHalt =
+{
+  0,
+  SetF10BlCacheFlushOnHaltRegister
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlEquivalenceTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlEquivalenceTable.c
new file mode 100644
index 0000000000..cbbb43feec
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlEquivalenceTable.c
@@ -0,0 +1,106 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 BL Equivalence Table related data
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_BL_F10BLEQUIVALENCETABLE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT16 ROMDATA CpuF10BlMicrocodeEquivalenceTable[] =
+{
+  0x1052, 0x1041,
+  0x1053, 0x1043
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the appropriate microcode patch equivalent ID table.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  BlEquivalenceTablePtr    Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10BlMicrocodeEquivalenceTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **BlEquivalenceTablePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = ((sizeof (CpuF10BlMicrocodeEquivalenceTable) / sizeof (UINT16)) / 2);
+  *BlEquivalenceTablePtr = CpuF10BlMicrocodeEquivalenceTable;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlHtPhyTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlHtPhyTables.c
new file mode 100644
index 0000000000..3f1b5dddd8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlHtPhyTables.c
@@ -0,0 +1,122 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 BL PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_BL_F10BLHTPHYTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  HT  Phy   T a b l e s
+// -------------------------
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10BlHtPhyRegisters[] =
+{
+
+//
+// NOTE: This entry is here for making this array not to be empty.
+//       This entry should be removed after adding another.
+//
+//
+// Deemphasis Settings
+//
+
+// For BL-C3, also set [7]TxLs23ClkGateEn.
+//deemphasis level        DL1[20:16], DL2[12:8], DP1[4:0] PostCur1En[31] PostCur2En[30] PreCur1En[29] MapPostCur2En[6]
+// No deemphasis            00h        00h          00h     0                0             0             0
+// -3dB postcursor          12h        00h          00h     1                0             0             0
+// -6dB postcursor          1Fh        00h          00h     1                0             0             0
+// -8dB postcursor          1Fh        06h          00h     1                1             0             1
+// -11dB postcursor         1Fh        0Dh          00h     1                1             0             1
+// -11dB postcursor with
+// -8dB precursor           1Fh        06h          07h     1                1             1             1
+
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_BL_C3                         // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x00000080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10BlHtPhyRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10BlHtPhyRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10BlHtPhyRegisters
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlLogicalIdTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlLogicalIdTables.c
new file mode 100644
index 0000000000..ed0ad17ee6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlLogicalIdTables.c
@@ -0,0 +1,106 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 BL Logical ID Table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_BL_F10BLLOGICALIDTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+STATIC CONST CPU_LOGICAL_ID_XLAT ROMDATA CpuF10BlLogicalIdAndRevArray[] =
+{
+  {
+    0x1052,
+    AMD_F10_BL_C2
+  },
+  {
+    0x1053,
+    AMD_F10_BL_C3
+  }
+};
+
+VOID
+GetF10BlLogicalIdAndRev (
+     OUT   CONST CPU_LOGICAL_ID_XLAT **BlIdPtr,
+     OUT   UINT8 *NumberOfElements,
+     OUT   UINT64 *LogicalFamily,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = (sizeof (CpuF10BlLogicalIdAndRevArray) / sizeof (CPU_LOGICAL_ID_XLAT));
+  *BlIdPtr = CpuF10BlLogicalIdAndRevArray;
+  *LogicalFamily = AMD_FAMILY_10_BL;
+}
+
+//CONST LOGICAL_ID_TABLE ROMDATA CpuF10BlLogicalIdAndRev =
+//{
+//  (sizeof (CpuF10BlLogicalIdAndRevArray) / sizeof (CPU_LOGICAL_ID_XLAT)),
+//  (CPU_LOGICAL_ID_XLAT *) &CpuF10BlLogicalIdAndRevArray
+//};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlMicrocodePatchTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlMicrocodePatchTables.c
new file mode 100644
index 0000000000..4cf0507cf9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlMicrocodePatchTables.c
@@ -0,0 +1,106 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 BL PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_BL_F10BLMICROCODEPATCHTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST MICROCODE_PATCHES ROMDATA *CpuF10BlMicroCodePatchArray[];
+extern CONST UINT8 ROMDATA CpuF10BlNumberOfMicrocodePatches;
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns a table containing the appropriate microcode patches.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  BlUcodePtr               Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10BlMicroCodePatchesStruct (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **BlUcodePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = CpuF10BlNumberOfMicrocodePatches;
+  *BlUcodePtr = &CpuF10BlMicroCodePatchArray[0];
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlMsrTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlMsrTables.c
new file mode 100644
index 0000000000..b56d290143
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlMsrTables.c
@@ -0,0 +1,106 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 BL, MSR tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_BL_F10BLMSRTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F10BlMsrRegisters[] =
+{
+//  M S R    T a b l e s
+// ----------------------
+//
+// NOTE: This entry is here for making this array not to be empty.
+//       This entry should be removed after adding another.
+//
+// MSR_LS_CFG (0xC0011020)
+// bit[1] = 0
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_B0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_LS_CFG,                           // MSR Address
+      0x0000000000000000,                   // OR Mask
+      (1 << 1),                             // NAND Mask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F10BlMsrRegisterTable = {
+  AllCores,
+  (sizeof (F10BlMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F10BlMsrRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlPciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlPciTables.c
new file mode 100644
index 0000000000..e6c15cb066
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/BL/F10BlPciTables.c
@@ -0,0 +1,196 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 BL PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "F10PackageType.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_BL_F10BLPCITABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10BlPciRegisters[] =
+{
+  // Function 0
+
+// F0x16C - Link Global Extended Control Register, Errata 351
+// bit[15:13] ForceFullT0 = 0
+// bit[5:0] T0Time = 0x14
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_BL_C2                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x00000014,                           // regData
+      0x0000E03F,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[7:6] InLnSt = 0x01
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_BL_C3                       // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x00000040,                           // regData
+      0x000000C0,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[15:13] ForceFullT0 = 6
+// bit[9] RXCalEn = 1
+// bit[5:0] T0Time = 0x26
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_BL_C3                      // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x0000C226,                           // regData
+      0x0000E23F,                           // regMask
+    }}
+  },
+// F0x170 - Link Extended Control Register - Link 0, sublink 0
+// Errata 351 (only need to override single link case.)
+// bit[8] LS2En = 0,
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_BL_C2                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x170), // Address
+      0x00000000,                           // regData
+      0x00000100,                           // regMask
+    }}
+  },
+
+
+// F3x80 - ACPI Power State Control
+// ACPI FIDVID Change
+// bits[0] CpuPrbEn = 1
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 0
+// bits[3] NbCofChg = 1
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 0
+  {
+    HtFeatPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_BL_Cx                       // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      HT_HOST_FEATURES_ALL,                 // link feats
+      PACKAGE_TYPE_S1G3_S1G4,               // package type
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0x000B0000,                           // regData
+      0x00FF0000,                           // regMask
+    }}
+  },
+// F3xA0 - Power Control Miscellaneous
+// bits[28] NbPstateForce = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_BL_C3                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0),  // Address
+      0x10000000,                           // regData
+      0x10000000,                           // regMask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F10BlPciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10BlPciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10BlPciRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaCacheFlushOnHalt.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaCacheFlushOnHalt.c
new file mode 100644
index 0000000000..4ca87cbca9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaCacheFlushOnHalt.c
@@ -0,0 +1,144 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Cache Flush On Halt Function.
+ *
+ * Contains code to initialize Cache Flush On Halt feature for Family 10h DA.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10/DA
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPostInit.h"
+#include "cpuFeatures.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_DA_F10DACACHEFLUSHONHALT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          P U B L I C     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *    Enable DA-C Cpu Cache Flush On Halt Function
+ *
+ *    @param[in]       FamilySpecificServices   The current Family Specific Services.
+ *    @param[in]       EntryPoint               Timepoint designator.
+ *    @param[in]       PlatformConfig           Contains the runtime modifiable feature input data.
+ *    @param[in]       StdHeader                Config Handle for library, services.
+ */
+VOID
+SetF10DaCacheFlushOnHaltRegister (
+  IN       CPU_CFOH_FAMILY_SERVICES     *FamilySpecificServices,
+  IN       UINT64                       EntryPoint,
+  IN       PLATFORM_CONFIGURATION       *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS            *StdHeader
+  )
+{
+  UINT32       CoreCount;
+  UINT32       AndMask;
+  UINT32       OrMask;
+  PCI_ADDR     PciAddress;
+  CPU_LOGICAL_ID LogicalId;
+
+  if ((EntryPoint & CPU_FEAT_AFTER_POST_MTRR_SYNC) != 0) {
+    // F3xDC[25:19] = 04h
+    // F3xDC[18:16] = 111b
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = CLOCK_POWER_TIMING_CTRL2_REG;
+    AndMask = 0xFC00FFFF;
+    OrMask = 0x00270000;
+
+    GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+    if (LogicalId.Revision == AMD_F10_DA_C2) {
+      //For DA_C2 single Core, F3xDC[18:16] = 0
+      GetActiveCoresInCurrentSocket (&CoreCount, StdHeader);
+      if (CoreCount == 1) {
+        OrMask = 0x00200000;
+      }
+    }
+
+    IDS_OPTION_HOOK (IDS_CACHE_FLUSH_HLT, &OrMask, StdHeader);
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F3xDC
+  }
+}
+
+CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F10DaCacheFlushOnHalt =
+{
+  0,
+  SetF10DaCacheFlushOnHaltRegister
+};
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaEquivalenceTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaEquivalenceTable.c
new file mode 100644
index 0000000000..4405135816
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaEquivalenceTable.c
@@ -0,0 +1,107 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 DA Equivalence Table related data
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_DA_F10DAEQUIVALENCETABLE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT16 ROMDATA CpuF10DaMicrocodeEquivalenceTable[] =
+{
+  0x1062, 0x1062,
+  0x1063, 0x1043
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the appropriate microcode patch equivalent ID table.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  DaEquivalenceTablePtr    Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10DaMicrocodeEquivalenceTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **DaEquivalenceTablePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = ((sizeof (CpuF10DaMicrocodeEquivalenceTable) / sizeof (UINT16)) / 2);
+  *DaEquivalenceTablePtr = CpuF10DaMicrocodeEquivalenceTable;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaHtPhyTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaHtPhyTables.c
new file mode 100644
index 0000000000..ca135db24a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaHtPhyTables.c
@@ -0,0 +1,283 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 DA PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_DA_F10DAHTPHYTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  HT   Phy T a b l e s
+// -------------------------
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10DaHtPhyRegisters[] =
+{
+
+//
+// Deemphasis Settings
+//
+
+// For DA, also set [7]TxLs23ClkGateEn.
+//deemphasis level        DL1[20:16], DL2[12:8], DP1[4:0] PostCur1En[31] PostCur2En[30] PreCur1En[29] MapPostCur2En[6]
+// No deemphasis            00h        00h          00h     0                0             0             0
+// -3dB postcursor          12h        00h          00h     1                0             0             0
+// -6dB postcursor          1Fh        00h          00h     1                0             0             0
+// -8dB postcursor          1Fh        06h          00h     1                1             0             1
+// -11dB postcursor         1Fh        0Dh          00h     1                1             0             1
+// -11dB postcursor with
+// -8dB precursor           1Fh        06h          07h     1                1             1             1
+
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x00000080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x00000080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x80120080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x80120080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x801F0080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x801F0080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xC01F06C0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xC01F06C0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xC01F0DC0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xC01F0DC0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xE01F06C7,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xE01F06C7,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10DaHtPhyRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10DaHtPhyRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10DaHtPhyRegisters
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaLogicalIdTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaLogicalIdTables.c
new file mode 100644
index 0000000000..b828ff4a1f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaLogicalIdTables.c
@@ -0,0 +1,107 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 DA Logical ID Table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_DA_F10DALOGICALIDTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+STATIC CONST CPU_LOGICAL_ID_XLAT ROMDATA CpuF10DaLogicalIdAndRevArray[] =
+{
+  {
+    0x1062,
+    AMD_F10_DA_C2
+  },
+  {
+    0x1063,
+    AMD_F10_DA_C3
+  }
+};
+
+VOID
+GetF10DaLogicalIdAndRev (
+     OUT   CONST CPU_LOGICAL_ID_XLAT **DaIdPtr,
+     OUT   UINT8 *NumberOfElements,
+     OUT   UINT64 *LogicalFamily,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = (sizeof (CpuF10DaLogicalIdAndRevArray) / sizeof (CPU_LOGICAL_ID_XLAT));
+  *DaIdPtr = CpuF10DaLogicalIdAndRevArray;
+  *LogicalFamily = AMD_FAMILY_10_DA;
+}
+
+//CONST LOGICAL_ID_TABLE ROMDATA CpuF10DaLogicalIdAndRev =
+//{
+//  (sizeof (CpuF10DaLogicalIdAndRevArray) / sizeof (CPU_LOGICAL_ID_XLAT)),
+//  (CPU_LOGICAL_ID_XLAT *) &CpuF10DaLogicalIdAndRevArray
+//};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaMicrocodePatchTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaMicrocodePatchTables.c
new file mode 100644
index 0000000000..2e7732760f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaMicrocodePatchTables.c
@@ -0,0 +1,106 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 DA PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_DA_F10DAMICROCODEPATCHTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern CONST MICROCODE_PATCHES ROMDATA *CpuF10DaMicroCodePatchArray[];
+extern CONST UINT8 ROMDATA CpuF10DaNumberOfMicrocodePatches;
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns a table containing the appropriate microcode patches.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  DaUcodePtr               Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10DaMicroCodePatchesStruct (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **DaUcodePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = CpuF10DaNumberOfMicrocodePatches;
+  *DaUcodePtr = &CpuF10DaMicroCodePatchArray[0];
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaMsrTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaMsrTables.c
new file mode 100644
index 0000000000..261f432a6e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaMsrTables.c
@@ -0,0 +1,106 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 DA, MSR tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_DA_F10DAMSRTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F10DaMsrRegisters[] =
+{
+//  M S R    T a b l e s
+// ----------------------
+//
+// NOTE: This entry is here for making this array not to be empty.
+//       This entry should be removed after adding another.
+//
+// MSR_LS_CFG (0xC0011020)
+// bit[1] = 0
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_B0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_LS_CFG,                           // MSR Address
+      0x0000000000000000,                   // OR Mask
+      (1 << 1),                             // NAND Mask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F10DaMsrRegisterTable = {
+  AllCores,
+  (sizeof (F10DaMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F10DaMsrRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaPciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaPciTables.c
new file mode 100644
index 0000000000..45e9194409
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/DA/F10DaPciTables.c
@@ -0,0 +1,192 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 DA PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "F10PackageType.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_DA_F10DAPCITABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10DaPciRegisters[] =
+{
+// F0x16C - Link Global Extended Control Register
+// bit[7:6] InLnSt = 0x01
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_DA_ALL                      // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x00000040,                           // regData
+      0x000000C0,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[15:13] ForceFullT0 = 6
+// bit[9] RXCalEn = 1
+// bit[5:0] T0Time = 0x26
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_DA_ALL                      // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x0000C226,                           // regData
+      0x0000E23F,                           // regMask
+    }}
+  },
+// F3x80 - ACPI Power State Control
+// ACPI FIDVID Change
+// bits[0] CpuPrbEn = 1
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 0
+// bits[3] NbCofChg = 1
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 0
+  {
+    HtFeatPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_DA_Cx                       // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      HT_HOST_FEATURES_ALL,                 // link feats
+      PACKAGE_TYPE_S1G3_S1G4,               // package type
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0x000B0000,                           // regData
+      0x00FF0000,                           // regMask
+    }}
+  },
+// F3xA0 - Power Control Miscellaneous
+// bits[13:11] PllLockTime = 1
+// bits[28] NbPstateForce = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_DA_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0),  // Address
+      0x10000800,                           // regData
+      0x10003800,                           // regMask
+    }}
+  },
+// F3xD4 - Clock Power/Timing Control 0 Register
+// bits[30:28] NbClkDiv = 5
+  {
+    HtFeatPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_DA_C2                       // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      HT_HOST_FEAT_HT3,                     // link feats
+      PACKAGE_TYPE_S1G3_S1G4,               // package type
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xD4),  // Address
+      0x50000000,                           // regData
+      0x70000000,                           // regMask
+    }}
+  },
+// F3x188 - NB Extended Configuration Low Register
+// bits[4] EnStpGntOnFlushMaskWakeup = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_DA_Cx                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x188), // Address
+      0x00000010,                           // regData
+      0x00000010,                           // regMask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F10DaPciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10DaPciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10DaPciRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch01000085.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch01000085.c
new file mode 100644
index 0000000000..414c71672c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch01000085.c
@@ -0,0 +1,1037 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Microcode patch.
+ *
+ * Fam10 Microcode Patch rev 01000085 for 1040 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10/REVC
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+// Patch code 01000085 for 1040 and equivalent
+CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch01000085 =
+{{
+0x08,
+0x20,
+0x01,
+0x05,
+0x85,
+0x00,
+0x00,
+0x01,
+0x00,
+0x80,
+0x20,
+0x00,
+0xc1,
+0xb9,
+0x5d,
+0x3d,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x40,
+0x10,
+0x00,
+0x00,
+0x00,
+0xaa,
+0xaa,
+0xaa,
+0x2f,
+0x02,
+0x00,
+0x00,
+0xa0,
+0x09,
+0x00,
+0x00,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xcf,
+0xf8,
+0xff,
+0x2a,
+0xc3,
+0x3f,
+0xd5,
+0xfd,
+0xbc,
+0xff,
+0xff,
+0xb3,
+0x0f,
+0xff,
+0x58,
+0xd5,
+0xf0,
+0x35,
+0x95,
+0x03,
+0x1d,
+0xf8,
+0x63,
+0x7b,
+0x40,
+0x03,
+0xd4,
+0x00,
+0x80,
+0x77,
+0xff,
+0x7f,
+0xfe,
+0xe1,
+0x98,
+0x8a,
+0x54,
+0xfe,
+0xaf,
+0xff,
+0xff,
+0x87,
+0x7f,
+0xa9,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x00,
+0xe0,
+0xff,
+0x7b,
+0x1f,
+0xc0,
+0x65,
+0xf4,
+0x0d,
+0xf0,
+0xe0,
+0x8f,
+0xfe,
+0x04,
+0xde,
+0x04,
+0x03,
+0xad,
+0xc3,
+0x2f,
+0xfe,
+0xa9,
+0xfc,
+0x07,
+0x00,
+0x3f,
+0x0f,
+0xff,
+0x15,
+0x00,
+0xb0,
+0x00,
+0xf8,
+0xaf,
+0xe4,
+0x3f,
+0x07,
+0xf8,
+0x79,
+0xf8,
+0xfe,
+0xff,
+0x97,
+0xa7,
+0x1f,
+0xe0,
+0xe7,
+0xe1,
+0xbf,
+0xf1,
+0x00,
+0xfe,
+0x7f,
+0x6f,
+0x80,
+0x03,
+0x4a,
+0x1a,
+0x00,
+0xc8,
+0x1f,
+0xf8,
+0x07,
+0xf0,
+0xfc,
+0x03,
+0xf8,
+0x37,
+0x7f,
+0xe0,
+0x1f,
+0xc0,
+0xf0,
+0x0f,
+0xe0,
+0xdf,
+0xff,
+0x81,
+0x7f,
+0x00,
+0xc3,
+0x3f,
+0x80,
+0x7f,
+0xfc,
+0x7f,
+0x0f,
+0x00,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1b,
+0xfe,
+0x01,
+0xfc,
+0xe0,
+0x3f,
+0xf0,
+0x0f,
+0x6f,
+0xf8,
+0x07,
+0xf0,
+0x80,
+0xff,
+0xc0,
+0x3f,
+0xbf,
+0xe1,
+0x1f,
+0xc0,
+0x00,
+0xfe,
+0xbf,
+0x07,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x07,
+0xf0,
+0x1f,
+0xf8,
+0xf8,
+0x37,
+0xfc,
+0x03,
+0x1f,
+0xc0,
+0x7f,
+0xe0,
+0xe0,
+0xdf,
+0xf0,
+0x0f,
+0x03,
+0x00,
+0xff,
+0xdf,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0xfc,
+0x03,
+0xf8,
+0x0f,
+0x01,
+0xfc,
+0x1b,
+0xfe,
+0xf0,
+0x0f,
+0xe0,
+0x3f,
+0x07,
+0xf0,
+0x6f,
+0xf8,
+0xef,
+0x01,
+0x80,
+0xff,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0x1f,
+0xf8,
+0x07,
+0xf0,
+0xfc,
+0x03,
+0xf8,
+0x37,
+0xff,
+0xf7,
+0x00,
+0xc0,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1b,
+0xfe,
+0x01,
+0xfc,
+0xe0,
+0xff,
+0x7b,
+0x00,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x00,
+0xf0,
+0xff,
+0x3d,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0x1e,
+0x00,
+0xf8,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x7f,
+0x0f,
+0x00,
+0xfc,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0xbf,
+0x07,
+0x00,
+0xfc,
+0x07,
+0xfe,
+0x01,
+0x0d,
+0xff,
+0x00,
+0xfe,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xfe,
+0x03,
+0xff,
+0xff,
+0x86,
+0x7f,
+0x00,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x01,
+0x80,
+0xff,
+0xef,
+0x7f,
+0x00,
+0xff,
+0x81,
+0x80,
+0x7f,
+0xc3,
+0x3f,
+0xfe,
+0x01,
+0xfc,
+0x07,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xd7,
+0x00,
+0x80,
+0xfb,
+0xc0,
+0x3f,
+0x80,
+0xff,
+0x1f,
+0xc0,
+0xbf,
+0xe1,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0xfd,
+0x6b,
+0x00,
+0xa0,
+0xcf,
+0x56,
+0x0e,
+0x80,
+0xe0,
+0x0f,
+0xe8,
+0x75,
+0xf6,
+0xff,
+0xff,
+0x00,
+0xc3,
+0xbb,
+0x16,
+0xf2,
+0x04,
+0x37,
+0xf8,
+0x13,
+0x0e,
+0x7f,
+0x0c,
+0xb8,
+0xe0,
+0xdc,
+0x35,
+0x00,
+0x60,
+0xff,
+0xff,
+0x1f,
+0x7f,
+0x78,
+0xc7,
+0xa2,
+0x95,
+0xff,
+0xe9,
+0x3f,
+0xdf,
+0xe0,
+0xcf,
+0x2a,
+0x00,
+0xfe,
+0x03,
+0xff,
+0xff,
+0x86,
+0x7f,
+0x00,
+0x00,
+0xf8,
+0xff,
+0x1e,
+0xff,
+0xf2,
+0xbf,
+0xff,
+0xfd,
+0x1f,
+0xfc,
+0x7b,
+0x0f,
+0xc0,
+0x23,
+0xd0,
+0xed,
+0xf5,
+0xe0,
+0xef,
+0x7f,
+0x00,
+0xff,
+0x81,
+0x80,
+0x7f,
+0xc3,
+0x3f,
+0x0f,
+0x00,
+0xfc,
+0x7f,
+0xfe,
+0x03,
+0xf9,
+0x5f,
+0x01,
+0x7e,
+0x1e,
+0xfe,
+0xf0,
+0x0f,
+0xe0,
+0x3f,
+0x07,
+0xf0,
+0x6f,
+0xf8,
+0xc0,
+0x3f,
+0x80,
+0xff,
+0x1f,
+0xc0,
+0xbf,
+0xe1,
+0x4c,
+0x06,
+0x00,
+0xbc,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0x1f,
+0xf8,
+0x07,
+0xf0,
+0xfc,
+0x03,
+0xf8,
+0x37,
+0x7f,
+0xe0,
+0x1f,
+0xc0,
+0xf0,
+0x0f,
+0xe0,
+0xdf,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1b,
+0xfe,
+0x01,
+0xfc,
+0xe0,
+0x3f,
+0xf0,
+0x0f,
+0x6f,
+0xf8,
+0x07,
+0xf0,
+0x80,
+0xff,
+0xef,
+0x01,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x07,
+0xf0,
+0x1f,
+0xf8,
+0xf8,
+0x37,
+0xfc,
+0x03,
+0x00,
+0xc0,
+0xff,
+0xf7,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0xfc,
+0x03,
+0xf8,
+0x0f,
+0x01,
+0xfc,
+0x1b,
+0xfe,
+0x7b,
+0x00,
+0xe0,
+0xff,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0x3d,
+0x00,
+0xf0,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0xff,
+0x1e,
+0x00,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x00,
+0xfc,
+0x7f,
+0x0f,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0x07,
+0x00,
+0xfe,
+0xbf,
+0xfe,
+0x01,
+0xfc,
+0x07,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0xdf,
+0x03,
+0x00,
+0xff,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xef,
+0x01,
+0x80
+}};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c6.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c6.c
new file mode 100644
index 0000000000..8bda08c1c8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c6.c
@@ -0,0 +1,1037 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Microcode patch.
+ *
+ * Fam10 Microcode Patch rev 010000c6 for 1041 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10/REVC
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+// Patch code 010000c6 for 1041 and equivalent
+CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000c6 =
+{{
+0x10,
+0x20,
+0x11,
+0x03,
+0xc6,
+0x00,
+0x00,
+0x01,
+0x00,
+0x80,
+0x20,
+0x00,
+0xb5,
+0x66,
+0x0e,
+0x84,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x41,
+0x10,
+0x00,
+0x00,
+0x00,
+0xaa,
+0xaa,
+0xaa,
+0xa0,
+0x09,
+0x00,
+0x00,
+0xa5,
+0x09,
+0x00,
+0x00,
+0xff,
+0xff,
+0xff,
+0xff,
+0xa1,
+0x09,
+0x00,
+0x00,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0x97,
+0xd1,
+0x7f,
+0x00,
+0x83,
+0x3f,
+0x36,
+0xc0,
+0xa0,
+0x1b,
+0xf8,
+0x13,
+0x0e,
+0xbf,
+0x0c,
+0xb4,
+0xf2,
+0x1f,
+0xf8,
+0xa7,
+0x3c,
+0xfc,
+0x03,
+0xfc,
+0x40,
+0x03,
+0x54,
+0x00,
+0x92,
+0xff,
+0xe0,
+0xbf,
+0xe7,
+0xe1,
+0x1f,
+0xe0,
+0x5f,
+0x9e,
+0xfa,
+0xff,
+0x9f,
+0x87,
+0x7f,
+0x80,
+0x03,
+0xf8,
+0xff,
+0xc6,
+0x01,
+0x0e,
+0xfc,
+0xbd,
+0x00,
+0xa0,
+0x2a,
+0x69,
+0x0e,
+0x40,
+0xbd,
+0x55,
+0xe0,
+0x73,
+0xd0,
+0x0f,
+0xff,
+0x00,
+0xe0,
+0xff,
+0x13,
+0xf2,
+0xc3,
+0xbb,
+0xff,
+0x8b,
+0xf8,
+0xff,
+0x44,
+0x59,
+0x0e,
+0x7f,
+0x34,
+0x00,
+0x00,
+0x5a,
+0xfb,
+0x07,
+0xe0,
+0xfb,
+0xc7,
+0x06,
+0x38,
+0xf0,
+0xfe,
+0x7f,
+0x94,
+0x9b,
+0x1f,
+0xe0,
+0xe7,
+0xe1,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0xff,
+0x1e,
+0x00,
+0xe8,
+0xff,
+0x8c,
+0x07,
+0xf0,
+0xf4,
+0x43,
+0xf9,
+0x3c,
+0x7e,
+0x33,
+0x0e,
+0xc0,
+0xd0,
+0x0f,
+0xe5,
+0xf3,
+0xf7,
+0xcb,
+0x38,
+0x00,
+0x43,
+0x3f,
+0x94,
+0xcf,
+0x1c,
+0x9c,
+0x0c,
+0x00,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1b,
+0xfe,
+0x01,
+0xfc,
+0xe0,
+0x3f,
+0xf0,
+0x0f,
+0x6f,
+0xf8,
+0x07,
+0xf0,
+0x80,
+0xff,
+0xc0,
+0x3f,
+0xbf,
+0xe1,
+0x1f,
+0xc0,
+0x00,
+0xfe,
+0xbf,
+0x07,
+0x03,
+0xf4,
+0xff,
+0xff,
+0xc8,
+0x0f,
+0xef,
+0x52,
+0x4f,
+0xf0,
+0xbf,
+0xe0,
+0xe0,
+0x3a,
+0xfc,
+0x31,
+0x0f,
+0xc0,
+0xd3,
+0xd5,
+0x0c,
+0x70,
+0xe0,
+0xcf,
+0x03,
+0x00,
+0x5c,
+0x56,
+0x7f,
+0x00,
+0xae,
+0x97,
+0x6c,
+0x80,
+0x03,
+0x7f,
+0xfe,
+0x01,
+0x78,
+0x6e,
+0xb1,
+0x01,
+0x0e,
+0xfc,
+0xf9,
+0x07,
+0xe0,
+0xf7,
+0xc7,
+0x06,
+0x38,
+0xf0,
+0x8b,
+0x01,
+0x00,
+0x61,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0x1f,
+0xf8,
+0x07,
+0xf0,
+0xfc,
+0x03,
+0xf8,
+0x37,
+0xff,
+0xf7,
+0x00,
+0xc0,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1b,
+0xfe,
+0x01,
+0xfc,
+0xe0,
+0xff,
+0x7b,
+0x00,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x00,
+0xf0,
+0xff,
+0x3d,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0x1e,
+0x00,
+0xf8,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x7f,
+0x0f,
+0x00,
+0xfc,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0xbf,
+0x07,
+0x00,
+0xfc,
+0x07,
+0xfe,
+0x01,
+0x0d,
+0xff,
+0x00,
+0xfe,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xfe,
+0x03,
+0xff,
+0xff,
+0x86,
+0x7f,
+0x00,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x01,
+0x80,
+0xff,
+0xef,
+0x7f,
+0x00,
+0xff,
+0x81,
+0x80,
+0x7f,
+0xc3,
+0x3f,
+0xfe,
+0x01,
+0xfc,
+0x07,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xd7,
+0x00,
+0x80,
+0xfb,
+0xc0,
+0x3f,
+0x80,
+0xff,
+0x1f,
+0xc0,
+0xbf,
+0xe1,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0xfd,
+0x6b,
+0x00,
+0xa0,
+0xff,
+0xfe,
+0xff,
+0xcb,
+0xf0,
+0xef,
+0xf5,
+0x7f,
+0x8f,
+0x40,
+0x3f,
+0x00,
+0x83,
+0xbf,
+0xb7,
+0xd7,
+0xfc,
+0x07,
+0xfe,
+0x01,
+0x0d,
+0xff,
+0x00,
+0xfe,
+0xf0,
+0xff,
+0x3d,
+0x00,
+0xe4,
+0x7f,
+0xf9,
+0x0f,
+0x79,
+0xf8,
+0x07,
+0xf8,
+0x80,
+0xff,
+0xc0,
+0x3f,
+0xbf,
+0xe1,
+0x1f,
+0xc0,
+0x00,
+0xfe,
+0x03,
+0xff,
+0xff,
+0x86,
+0x7f,
+0x00,
+0x00,
+0xf0,
+0x32,
+0x19,
+0x07,
+0xf0,
+0x1f,
+0xf8,
+0xf8,
+0x37,
+0xfc,
+0x03,
+0x1f,
+0xc0,
+0x7f,
+0xe0,
+0xe0,
+0xdf,
+0xf0,
+0x0f,
+0x7f,
+0x00,
+0xff,
+0x81,
+0x80,
+0x7f,
+0xc3,
+0x3f,
+0x0f,
+0x00,
+0xfc,
+0x7f,
+0xfc,
+0x03,
+0xf8,
+0x0f,
+0x01,
+0xfc,
+0x1b,
+0xfe,
+0xf0,
+0x0f,
+0xe0,
+0x3f,
+0x07,
+0xf0,
+0x6f,
+0xf8,
+0xc0,
+0x3f,
+0x80,
+0xff,
+0x1f,
+0xc0,
+0xbf,
+0xe1,
+0xbf,
+0x07,
+0x00,
+0xfe,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0x1f,
+0xf8,
+0x07,
+0xf0,
+0xfc,
+0x03,
+0xf8,
+0x37,
+0x7f,
+0xe0,
+0x1f,
+0xc0,
+0xf0,
+0x0f,
+0xe0,
+0xdf,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1b,
+0xfe,
+0x01,
+0xfc,
+0xe0,
+0x3f,
+0xf0,
+0x0f,
+0x6f,
+0xf8,
+0x07,
+0xf0,
+0x80,
+0xff,
+0xef,
+0x01,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x07,
+0xf0,
+0x1f,
+0xf8,
+0xf8,
+0x37,
+0xfc,
+0x03,
+0x00,
+0xc0,
+0xff,
+0xf7,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0xfc,
+0x03,
+0xf8,
+0x0f,
+0x01,
+0xfc,
+0x1b,
+0xfe,
+0x7b,
+0x00,
+0xe0,
+0xff,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0x3d,
+0x00,
+0xf0,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0xff,
+0x1e,
+0x00,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x00,
+0xfc,
+0x7f,
+0x0f,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0x07,
+0x00,
+0xfe,
+0xbf,
+0xfe,
+0x01,
+0xfc,
+0x07,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0xdf,
+0x03,
+0x00,
+0xff,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xef,
+0x01,
+0x80
+}};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c7.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c7.c
new file mode 100644
index 0000000000..3f1ec053b5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c7.c
@@ -0,0 +1,1037 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Microcode patch.
+ *
+ * Fam10 Microcode Patch rev 010000c7 for 1062 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10/REVC
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+// Patch code 010000c7 for 1062 and equivalent
+CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000c7 =
+{{
+0x10,
+0x20,
+0x11,
+0x03,
+0xc7,
+0x00,
+0x00,
+0x01,
+0x00,
+0x80,
+0x20,
+0x00,
+0xb8,
+0x53,
+0x63,
+0x1d,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x62,
+0x10,
+0x00,
+0x00,
+0x00,
+0xaa,
+0xaa,
+0xaa,
+0x9a,
+0x0b,
+0x00,
+0x00,
+0x16,
+0x0c,
+0x00,
+0x00,
+0x55,
+0x03,
+0x00,
+0x00,
+0xff,
+0xff,
+0xff,
+0xff,
+0x51,
+0x03,
+0x00,
+0x00,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0x6f,
+0x58,
+0x39,
+0x00,
+0x81,
+0x3f,
+0xa0,
+0xd7,
+0x04,
+0x00,
+0xfc,
+0xb7,
+0x0f,
+0xff,
+0x58,
+0xf7,
+0x72,
+0xc0,
+0xff,
+0x6f,
+0x3c,
+0xfc,
+0x03,
+0xfc,
+0xc0,
+0x18,
+0xd5,
+0x00,
+0x80,
+0xff,
+0x66,
+0x3c,
+0xeb,
+0xc0,
+0x9f,
+0xd9,
+0x4d,
+0xee,
+0xf8,
+0xff,
+0xff,
+0x83,
+0x7f,
+0xa6,
+0x07,
+0xe8,
+0xff,
+0xff,
+0xe8,
+0x1f,
+0xbe,
+0xb5,
+0x00,
+0x60,
+0x2f,
+0x6a,
+0xbf,
+0xe8,
+0x04,
+0xff,
+0xf5,
+0xf3,
+0xf0,
+0xaf,
+0x7a,
+0x00,
+0xff,
+0xd9,
+0x31,
+0xc0,
+0x83,
+0x3f,
+0xff,
+0x03,
+0x88,
+0xff,
+0x58,
+0xc8,
+0x0f,
+0xef,
+0x35,
+0x00,
+0xd0,
+0x00,
+0xfb,
+0xbf,
+0x85,
+0xff,
+0x03,
+0xd8,
+0x72,
+0xf8,
+0xad,
+0x1c,
+0x80,
+0xfb,
+0x1f,
+0xc0,
+0xe7,
+0xa0,
+0xbe,
+0x71,
+0x00,
+0x86,
+0x7f,
+0x40,
+0xaf,
+0x07,
+0xff,
+0x1e,
+0x00,
+0xf8,
+0x6f,
+0x95,
+0x03,
+0x50,
+0xf4,
+0x03,
+0xf8,
+0x1c,
+0xf8,
+0xff,
+0x3f,
+0x00,
+0xf0,
+0xee,
+0x84,
+0xfc,
+0xfe,
+0xff,
+0xff,
+0x22,
+0xc3,
+0x1f,
+0x51,
+0x96,
+0x50,
+0x16,
+0x0d,
+0x00,
+0xf8,
+0xfe,
+0xfe,
+0x01,
+0x0e,
+0xfc,
+0xb1,
+0x01,
+0xe5,
+0xa6,
+0xff,
+0x1f,
+0x79,
+0xf8,
+0x07,
+0xf8,
+0x80,
+0xff,
+0xc0,
+0x3f,
+0xbf,
+0xe1,
+0x1f,
+0xc0,
+0x00,
+0xfa,
+0xbf,
+0x07,
+0x01,
+0xfc,
+0x3f,
+0xe3,
+0x3e,
+0x0f,
+0xfd,
+0x50,
+0x03,
+0xb0,
+0xdf,
+0x8c,
+0xf9,
+0x3c,
+0xf4,
+0x43,
+0x0e,
+0xc0,
+0xfd,
+0x32,
+0xe5,
+0xf3,
+0xd0,
+0x0f,
+0x03,
+0x00,
+0xfb,
+0x24,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0xfc,
+0x03,
+0xf8,
+0x0f,
+0x01,
+0xfc,
+0x1b,
+0xfe,
+0xf0,
+0x0f,
+0xe0,
+0x3f,
+0x07,
+0xf0,
+0x6f,
+0xf8,
+0xef,
+0x01,
+0x80,
+0xff,
+0xff,
+0xff,
+0x00,
+0xfd,
+0xbb,
+0x14,
+0xf2,
+0xc3,
+0x2f,
+0xf8,
+0x13,
+0xcc,
+0x7f,
+0x0c,
+0xb8,
+0x0e,
+0x74,
+0xf5,
+0x03,
+0xf0,
+0xf8,
+0x33,
+0x03,
+0x1c,
+0x2b,
+0xd7,
+0x00,
+0x00,
+0xeb,
+0xe5,
+0x1f,
+0x80,
+0xc0,
+0x1f,
+0x1b,
+0xe0,
+0x9e,
+0x9b,
+0x7f,
+0x00,
+0x03,
+0x7f,
+0x6c,
+0x80,
+0xf8,
+0x7d,
+0xfe,
+0x01,
+0x0e,
+0xfc,
+0xb1,
+0x01,
+0xe0,
+0x6d,
+0x62,
+0x00,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x00,
+0xf0,
+0xff,
+0x3d,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0x1e,
+0x00,
+0xf8,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x7f,
+0x0f,
+0x00,
+0xfc,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0xbf,
+0x07,
+0x00,
+0xfc,
+0x07,
+0xfe,
+0x01,
+0x0d,
+0xff,
+0x00,
+0xfe,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xfe,
+0x03,
+0xff,
+0xff,
+0x86,
+0x7f,
+0x00,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x01,
+0x80,
+0xff,
+0xef,
+0x7f,
+0x00,
+0xff,
+0x81,
+0x80,
+0x7f,
+0xc3,
+0x3f,
+0xfe,
+0x01,
+0xfc,
+0x07,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xd7,
+0x00,
+0x00,
+0xfa,
+0xc0,
+0x3f,
+0x80,
+0xff,
+0x1f,
+0xc0,
+0xbf,
+0xe1,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0xfc,
+0x6b,
+0x00,
+0xe0,
+0xfc,
+0xff,
+0x3f,
+0xcb,
+0xf0,
+0x8f,
+0x75,
+0xff,
+0xe5,
+0xff,
+0xff,
+0x2c,
+0xc3,
+0x3f,
+0xd6,
+0xf5,
+0x1c,
+0xf0,
+0xff,
+0x8b,
+0x0f,
+0xff,
+0x00,
+0x3f,
+0xf0,
+0xff,
+0x3d,
+0x00,
+0xe0,
+0xbf,
+0x18,
+0x0f,
+0x3a,
+0xf0,
+0x27,
+0xf6,
+0xd1,
+0x35,
+0xfe,
+0x7f,
+0xe7,
+0xe1,
+0x9f,
+0xe8,
+0x5f,
+0xc6,
+0xff,
+0xff,
+0xeb,
+0x87,
+0x7f,
+0xaf,
+0x00,
+0xf8,
+0xff,
+0x1e,
+0x07,
+0xf0,
+0xbf,
+0xad,
+0x03,
+0x3c,
+0xf8,
+0x13,
+0x1f,
+0xc0,
+0x7f,
+0xf6,
+0x45,
+0xff,
+0xf0,
+0xad,
+0xff,
+0x04,
+0xff,
+0xff,
+0x83,
+0xad,
+0xc3,
+0x2f,
+0x04,
+0x00,
+0x2c,
+0x80,
+0xfe,
+0x03,
+0xf8,
+0xff,
+0xb5,
+0xe8,
+0x1f,
+0xbe,
+0xff,
+0xdf,
+0x65,
+0xfc,
+0x07,
+0x38,
+0x6b,
+0xf8,
+0xee,
+0xbf,
+0x96,
+0xff,
+0x5f,
+0xeb,
+0xff,
+0xe1,
+0xbf,
+0x07,
+0x00,
+0xfe,
+0x07,
+0xfe,
+0xb5,
+0xfc,
+0xbf,
+0x5a,
+0x57,
+0x0e,
+0xbf,
+0xad,
+0x07,
+0xf0,
+0xf4,
+0x13,
+0xf9,
+0x3c,
+0xf8,
+0x80,
+0x3f,
+0x81,
+0xf0,
+0xcb,
+0x60,
+0xeb,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xfe,
+0xb7,
+0xf5,
+0x00,
+0x07,
+0x7f,
+0x62,
+0x80,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1f,
+0xbe,
+0xb5,
+0xe8,
+0x60,
+0x7c,
+0xc0,
+0x9f,
+0x75,
+0xf8,
+0x65,
+0xb0,
+0x00,
+0x04,
+0x90,
+0x00,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x07,
+0xf0,
+0x1f,
+0xf8,
+0xf8,
+0x37,
+0xfc,
+0x03,
+0x00,
+0xc0,
+0xff,
+0xf7,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0xfc,
+0x03,
+0xf8,
+0x0f,
+0x01,
+0xfc,
+0x1b,
+0xfe,
+0x7b,
+0x00,
+0xe0,
+0xff,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0x3d,
+0x00,
+0xf0,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0xff,
+0x1e,
+0x00,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x00,
+0xfc,
+0x7f,
+0x0f,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0x07,
+0x00,
+0xfe,
+0xbf,
+0xfe,
+0x01,
+0xfc,
+0x07,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0xdf,
+0x03,
+0x00,
+0xff,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xef,
+0x01,
+0x80
+}};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c8.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c8.c
new file mode 100644
index 0000000000..46ab18db3f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10MicrocodePatch010000c8.c
@@ -0,0 +1,1037 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Microcode patch.
+ *
+ * Fam10 Microcode Patch rev 010000c8 for 1043 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10/REVC
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+// Patch code 010000c8 for 1043 and equivalent
+CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000c8 =
+{{
+0x10,
+0x20,
+0x11,
+0x03,
+0xc8,
+0x00,
+0x00,
+0x01,
+0x00,
+0x80,
+0x20,
+0x00,
+0x6a,
+0x99,
+0x77,
+0xef,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x43,
+0x10,
+0x00,
+0x00,
+0x00,
+0xaa,
+0xaa,
+0xaa,
+0x10,
+0x0c,
+0x00,
+0x00,
+0x55,
+0x03,
+0x00,
+0x00,
+0xff,
+0xff,
+0xff,
+0xff,
+0x51,
+0x03,
+0x00,
+0x00,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0x18,
+0x80,
+0x38,
+0xc0,
+0x83,
+0x37,
+0x80,
+0xff,
+0xb8,
+0xff,
+0xff,
+0x13,
+0x0e,
+0xbf,
+0x0c,
+0xb6,
+0x7a,
+0xc4,
+0xff,
+0x2f,
+0x3c,
+0xfc,
+0x6b,
+0xfd,
+0x40,
+0x03,
+0xd4,
+0x00,
+0x97,
+0xff,
+0xff,
+0xff,
+0xe7,
+0xe1,
+0x1f,
+0xe0,
+0x00,
+0xfe,
+0xbf,
+0xf5,
+0x9f,
+0x87,
+0x7e,
+0x22,
+0x01,
+0xc6,
+0x00,
+0xc4,
+0x7c,
+0x1e,
+0xfa,
+0x01,
+0x00,
+0xe0,
+0xff,
+0x7b,
+0x0e,
+0x40,
+0xbd,
+0x55,
+0xe0,
+0x73,
+0xd0,
+0x0f,
+0xff,
+0x00,
+0xe0,
+0xff,
+0x13,
+0xf2,
+0xc3,
+0xbb,
+0xff,
+0x8b,
+0xf8,
+0xff,
+0x44,
+0x59,
+0x0e,
+0x7f,
+0x34,
+0x00,
+0x70,
+0x59,
+0xfb,
+0x07,
+0xe0,
+0xfb,
+0xc7,
+0x06,
+0x38,
+0xf0,
+0xfe,
+0x7f,
+0x94,
+0x9b,
+0x1f,
+0xe0,
+0xe7,
+0xe1,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0xff,
+0x1e,
+0x00,
+0xe8,
+0xff,
+0x8c,
+0x07,
+0xf0,
+0xf4,
+0x43,
+0xf9,
+0x3c,
+0x7e,
+0x33,
+0x0e,
+0xc0,
+0xd0,
+0x0f,
+0xe5,
+0xf3,
+0xf7,
+0xcb,
+0x38,
+0x00,
+0x43,
+0x3f,
+0x94,
+0xcf,
+0xec,
+0x93,
+0x0c,
+0x00,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1b,
+0xfe,
+0x01,
+0xfc,
+0xe0,
+0x3f,
+0xf0,
+0x0f,
+0x6f,
+0xf8,
+0x07,
+0xf0,
+0x80,
+0xff,
+0xc0,
+0x3f,
+0xbf,
+0xe1,
+0x1f,
+0xc0,
+0x00,
+0xfe,
+0xbf,
+0x07,
+0x03,
+0xf4,
+0xff,
+0xff,
+0xc8,
+0x0f,
+0xef,
+0x52,
+0x4f,
+0x70,
+0xbf,
+0xe0,
+0xe0,
+0x3a,
+0xfc,
+0x31,
+0x0f,
+0xc0,
+0xd3,
+0xd5,
+0x0c,
+0x70,
+0xe0,
+0xcf,
+0x03,
+0x00,
+0xac,
+0x5c,
+0x7f,
+0x00,
+0xae,
+0x97,
+0x6c,
+0x80,
+0x03,
+0x7f,
+0xfe,
+0x01,
+0x78,
+0x6e,
+0xb1,
+0x01,
+0x0e,
+0xfc,
+0xf9,
+0x07,
+0xe0,
+0xf7,
+0xc7,
+0x06,
+0x38,
+0xf0,
+0x8b,
+0x01,
+0x00,
+0x5e,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0x1f,
+0xf8,
+0x07,
+0xf0,
+0xfc,
+0x03,
+0xf8,
+0x37,
+0xff,
+0xf7,
+0x00,
+0xc0,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1b,
+0xfe,
+0x01,
+0xfc,
+0xe0,
+0xff,
+0x7b,
+0x00,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x00,
+0xf0,
+0xff,
+0x3d,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0x1e,
+0x00,
+0xf8,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x7f,
+0x0f,
+0x00,
+0xfc,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0xbf,
+0x07,
+0x00,
+0xfc,
+0x07,
+0xfe,
+0x01,
+0x0d,
+0xff,
+0x00,
+0xfe,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xfe,
+0x03,
+0xff,
+0xff,
+0x86,
+0x7f,
+0x00,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x01,
+0x80,
+0xff,
+0xef,
+0x7f,
+0x00,
+0xff,
+0x81,
+0x80,
+0x7f,
+0xc3,
+0x3f,
+0xfe,
+0x01,
+0xfc,
+0x07,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xd7,
+0x00,
+0x80,
+0xf8,
+0xc0,
+0x3f,
+0x80,
+0xff,
+0x1f,
+0xc0,
+0xbf,
+0xe1,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0xfc,
+0x6b,
+0x00,
+0x20,
+0x04,
+0xff,
+0xbf,
+0xe8,
+0xf0,
+0xaf,
+0xf5,
+0xf3,
+0xff,
+0xd9,
+0x7a,
+0x00,
+0x83,
+0x3f,
+0x31,
+0xc0,
+0x0c,
+0x7d,
+0xe3,
+0x00,
+0x0f,
+0xfe,
+0x80,
+0x5e,
+0xf0,
+0xff,
+0x3d,
+0x00,
+0x65,
+0xfe,
+0xff,
+0x9f,
+0x7f,
+0xf8,
+0xc7,
+0xba,
+0x96,
+0xf2,
+0xff,
+0x7f,
+0xfa,
+0xe1,
+0x1f,
+0xeb,
+0x45,
+0x0e,
+0xf8,
+0xff,
+0x9f,
+0x87,
+0x7f,
+0x80,
+0x00,
+0xf8,
+0xff,
+0x1e,
+0x07,
+0xf0,
+0x5f,
+0x8c,
+0x7b,
+0x1d,
+0xf8,
+0x13,
+0xbf,
+0xe8,
+0x1a,
+0xff,
+0xf4,
+0xf3,
+0xf0,
+0x4f,
+0xff,
+0x2f,
+0xe3,
+0xff,
+0xd7,
+0xf5,
+0xc3,
+0xbf,
+0x0f,
+0x00,
+0xfc,
+0x7f,
+0xd6,
+0x03,
+0xf8,
+0xdf,
+0x89,
+0x01,
+0x1e,
+0xfc,
+0xfb,
+0x0f,
+0xe0,
+0x3f,
+0xd6,
+0xa2,
+0x7f,
+0xf8,
+0xff,
+0x7f,
+0x82,
+0xff,
+0x97,
+0xc1,
+0xd6,
+0xe1,
+0x40,
+0x02,
+0x00,
+0x14,
+0x7f,
+0xff,
+0x01,
+0xfc,
+0xdf,
+0x5a,
+0xf4,
+0x0f,
+0xfe,
+0xff,
+0xef,
+0x32,
+0xfc,
+0x03,
+0x9c,
+0x35,
+0x7f,
+0xf7,
+0x5f,
+0xcb,
+0xf0,
+0xaf,
+0xf5,
+0xff,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xfe,
+0x03,
+0xff,
+0x5a,
+0x87,
+0x5f,
+0xad,
+0x2b,
+0xf8,
+0xdf,
+0xd6,
+0x03,
+0x1e,
+0xfa,
+0x89,
+0x7c,
+0x20,
+0x7d,
+0xc0,
+0x9f,
+0x75,
+0xf8,
+0x65,
+0xb0,
+0x80,
+0xff,
+0xef,
+0x01,
+0x00,
+0xff,
+0xdb,
+0x7a,
+0xc0,
+0x83,
+0x3f,
+0x31,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xf4,
+0x0f,
+0xdf,
+0x5a,
+0x4f,
+0xa0,
+0x3e,
+0xe0,
+0xd8,
+0x3a,
+0xfc,
+0x32,
+0x00,
+0xc0,
+0x01,
+0x48,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0xfc,
+0x03,
+0xf8,
+0x0f,
+0x01,
+0xfc,
+0x1b,
+0xfe,
+0x7b,
+0x00,
+0xe0,
+0xff,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0x3d,
+0x00,
+0xf0,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0xff,
+0x1e,
+0x00,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x00,
+0xfc,
+0x7f,
+0x0f,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0x07,
+0x00,
+0xfe,
+0xbf,
+0xfe,
+0x01,
+0xfc,
+0x07,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0xdf,
+0x03,
+0x00,
+0xff,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xef,
+0x01,
+0x80
+}};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCHtPhyTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCHtPhyTables.c
new file mode 100644
index 0000000000..7b413ace61
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCHtPhyTables.c
@@ -0,0 +1,439 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Rev C HT PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_F10REVCHTPHYTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  HT   Phy T a b l e s
+// -------------------------
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10RevCHtPhyRegisters[] =
+{
+// 0x60:0x68
+  {
+    HtPhyRangeRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_C0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_ALL,               //
+      0x60, 0x68,                           // Address range
+      0x00000040,                           // regData
+      0x00000040,                           // regMask
+    }}
+  },
+// 0x70:0x78
+  {
+    HtPhyRangeRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_C0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_ALL,               //
+      0x70, 0x78,                           // Address range
+      0x00000040,                           // regData
+      0x00000040,                           // regMask
+    }}
+  },
+// Erratum 354
+// 0x40:48
+  {
+    HtPhyRangeRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      (AMD_F10_C2 | AMD_F10_C3)           // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0x40, 0x48,                           // Address
+      0x00000040,                           // regData
+      0x00000040,                           // regMask
+    }}
+  },
+// 0x50:0x58
+  {
+    HtPhyRangeRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      (AMD_F10_C2 | AMD_F10_C3)          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0x50, 0x58,                           // Address
+      0x00000040,                           // regData
+      0x00000040,                           // regMask
+    }}
+  },
+// 0xC0
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_ALL,               //
+      0xC0,                                 // Address
+      0x40040000,                           // regData
+      0xe01F0000,                           // regMask
+    }}
+  },
+// 0xD0
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_ALL,               //
+      0xD0,                                 // Address
+      0x40040000,                           // regData
+      0xe01F0000,                           // regMask
+    }}
+  },
+// 0xCF
+// FIFO_PTR_OPT_VALUE
+  {
+    HtPhyProfileRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_NB_PSTATES_ENABLE,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xCF,                                 // Address
+      0x0000004A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// FIFO_PTR_OPT_VALUE
+  {
+    HtPhyProfileRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_NB_PSTATES_ENABLE,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xDF,                                 // Address
+      0x0000004A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0x520A
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                           // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_ALL,                   //
+      0x520A,                               // Address
+      0x00004000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+// 0x530A
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                           // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_ALL,                   //
+      0x530A,                               // Address
+      0x00004000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+
+
+
+
+//
+// Deemphasis Settings
+//
+
+// For C3, also set [7]TxLs23ClkGateEn.
+//deemphasis level        DL1[20:16], DL2[12:8], DP1[4:0] PostCur1En[31] PostCur2En[30] PreCur1En[29] MapPostCur2En[6]
+// No deemphasis            00h        00h          00h     0                0             0             0
+// -3dB postcursor          12h        00h          00h     1                0             0             0
+// -6dB postcursor          1Fh        00h          00h     1                0             0             0
+// -8dB postcursor          1Fh        06h          00h     1                1             0             1
+// -11dB postcursor         1Fh        0Dh          00h     1                1             0             1
+// -11dB postcursor with
+// -8dB precursor           1Fh        06h          07h     1                1             1             1
+
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x00000080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x00000080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x80120080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x80120080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x801F0080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x801F0080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xC01F06C0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xC01F06C0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xC01F0DC0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xC01F0DC0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xE01F06C7,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xE01F06C7,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10RevCHtPhyRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10RevCHtPhyRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10RevCHtPhyRegisters
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCHwC1e.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCHwC1e.c
new file mode 100644
index 0000000000..3f99c9d132
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCHwC1e.c
@@ -0,0 +1,205 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 HW C1e feature support functions.
+ *
+ * Provides the functions necessary to initialize the hardware C1e feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuHwC1e.h"
+#include "cpuApicUtilities.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuFamilyTranslation.h"
+#include "F10PackageType.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_F10REVCHWC1E_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F10InitializeHwC1eOnCore (
+  IN       VOID *IntPendMsr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should hardware C1e be enabled
+ *
+ * @param[in]    HwC1eServices      Pointer to this CPU's HW C1e family services.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               HW C1e is supported.
+ *
+ */
+BOOLEAN
+STATIC
+F10IsHwC1eSupported (
+  IN       HW_C1E_FAMILY_SERVICES *HwC1eServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 PackageType;
+  CPU_LOGICAL_ID LogicalId;
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+
+  if (((LogicalId.Revision & AMD_F10_RB_ALL) & ~(AMD_F10_RB_C3)) != 0) {
+    return FALSE;
+  }
+
+  // Check if it is BL C2 (not S1g3)
+  if ((LogicalId.Revision & AMD_F10_BL_C2) != 0) {
+    PackageType = LibAmdGetPackageType (StdHeader);
+    if (PackageType != PACKAGE_TYPE_S1G3) {
+      return FALSE;
+    }
+  }
+  return TRUE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable Hardware C1e on a family 10h CPU.
+ *
+ * @param[in]    HwC1eServices      Pointer to this CPU's HW C1e family services.
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F10InitializeHwC1e (
+  IN       HW_C1E_FAMILY_SERVICES *HwC1eServices,
+  IN       UINT64 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 C1eData;
+  UINT64 LocalMsrRegister;
+  AP_TASK TaskPtr;
+
+  LocalMsrRegister = 0;
+  C1eData     = PlatformConfig->C1ePlatformData;
+
+  if (PlatformConfig->C1eMode == C1eModeAuto) {
+    C1eData = PlatformConfig->C1ePlatformData3;
+  }
+
+  ((INTPEND_MSR *) &LocalMsrRegister)->IoMsgAddr = C1eData;
+  ((INTPEND_MSR *) &LocalMsrRegister)->IoRd = 1;
+  ((INTPEND_MSR *) &LocalMsrRegister)->C1eOnCmpHalt = 1;
+  ((INTPEND_MSR *) &LocalMsrRegister)->SmiOnCmpHalt = 0;
+
+  TaskPtr.FuncAddress.PfApTaskI = F10InitializeHwC1eOnCore;
+  TaskPtr.DataTransfer.DataSizeInDwords = 2;
+  TaskPtr.DataTransfer.DataPtr = &LocalMsrRegister;
+  TaskPtr.DataTransfer.DataTransferFlags = 0;
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+  ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, NULL);
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable Hardware C1e on a family 10h core.
+ *
+ * @param[in]    IntPendMsr         MSR value to write to C001_0055 as determined by core 0.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F10InitializeHwC1eOnCore (
+  IN       VOID *IntPendMsr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64  LocalMsrRegister;
+
+  // Enable C1e
+  LibAmdMsrWrite (MSR_INTPEND, (UINT64 *) IntPendMsr, StdHeader);
+
+  // Set OS Visible Workaround Status BIT1 to indicate that C1e
+  // is enabled.
+  LibAmdMsrRead (MSR_OSVW_Status, &LocalMsrRegister, StdHeader);
+  LocalMsrRegister |= BIT1;
+  LibAmdMsrWrite (MSR_OSVW_Status, &LocalMsrRegister, StdHeader);
+}
+
+
+CONST HW_C1E_FAMILY_SERVICES ROMDATA F10HwC1e =
+{
+  0,
+  F10IsHwC1eSupported,
+  F10InitializeHwC1e
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCMsrTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCMsrTables.c
new file mode 100644
index 0000000000..f77841cd57
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCMsrTables.c
@@ -0,0 +1,133 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Rev C, MSR tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_F10REVCMSRTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F10RevCMsrRegisters[] =
+{
+//  M S R    T a b l e s
+// ----------------------
+// MSR_LS_CFG (0xC0011020)
+// bit[1] = 0
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_B0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_LS_CFG,                           // MSR Address
+      0x0000000000000000,                   // OR Mask
+      (1 << 1),                             // NAND Mask
+    }}
+  },
+
+// MSR_BU_CFG (0xC0011023)
+// bit[21] = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_B0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_BU_CFG,                           // MSR Address
+      (1 << 21),                            // OR Mask
+      (1 << 21),                            // NAND Mask
+    }}
+  },
+
+// MSR_BU_CFG2 (0xC001102A)
+// bit[50] = 1
+// For GH rev C1 and later [RdMmExtCfgQwEn]=1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_C0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_BU_CFG2,                          // MSR Address
+      0x0004000000000000,                   // OR Mask
+      0x0004000000000000,                   // NAND Mask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10RevCMsrRegisterTable = {
+  AllCores,
+  (sizeof (F10RevCMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F10RevCMsrRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCPciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCPciTables.c
new file mode 100644
index 0000000000..266dd211d1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCPciTables.c
@@ -0,0 +1,265 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Rev C PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10/RevC
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "F10PackageType.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_F10REVCPCITABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10RevCPciRegisters[] =
+{
+// Function 2 - DRAM Controller
+
+// F2x1B0 - Extended Memory Controller Configuration Low Register
+//
+// bit[5:4], AdapPrefNegativeStep = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x1B0), // Address
+      0x00000000,                           // regData
+      0x00000030,                           // regMask
+    }}
+  },
+// Function 3 - Misc. Control
+
+// F3x158 - Link to XCS Token Count
+// bits[3:0] LnkToXcsDRToken = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_A2                       // CpuRevision
+    },
+    {AMD_PF_UMA},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x158), // Address
+      0x00000003,                           // regData
+      0x0000000F,                           // regMask
+    }}
+  },
+// F3x80 - ACPI Power State Control
+// ACPI State C2
+// bits[0] CpuPrbEn = 1
+// bits[1] NbLowPwrEn = 0
+// bits[2] NbGateEn = 0
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 1
+// ACPI State C3, C1E or Link init
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 1
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 7
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0x0000E681,                           // regData
+      0x0000FFFF,                           // regMask
+    }}
+  },
+// F3x80 - ACPI Power State Control
+// ACPI State C3, C1E or Link init
+// bits[0] CpuPrbEn = 1
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 1
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 4
+  {
+    HtFeatPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      HT_HOST_FEAT_HT1,                     // link feats
+      PACKAGE_TYPE_ASB2,                    // package type
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0x00008700,                           // regData
+      0x0000FF00,                           // regMask
+    }}
+  },
+// F3x80 - ACPI Power State Control
+// ACPI State C3, C1E or Link init
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 1
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 1
+// bits[7:5] ClkDivisor = 7
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_C3                           // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platformFeatures
+    {{
+      PERFORMANCE_VRM_HIGH_SPEED_ENABLE,    // PerformanceFeatures
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0x0000F600,                           // regData
+      0x0000FF00,                           // regMask
+    }}
+  },
+// F3x80 - ACPI Power State Control
+// ACPI State C3, C1E or Link init
+// bits[0] CpuPrbEn = 1
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 1
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 4
+  {
+    HtFeatPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      HT_HOST_FEAT_HT1,                     // link feats
+      PACKAGE_TYPE_ALL & (~ PACKAGE_TYPE_ASB2),  // package type
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0x00008700,                           // regData
+      0x0000FF00,                           // regMask
+    }}
+  },
+// F3xDC - Clock Power Timing Control 2
+// bits[14:12] NbsynPtrAdj = 5
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xDC),  // Address
+      0x00005000,                           // regData
+      0x00007000,                           // regMask
+    }}
+  },
+// F3x180 - NB Extended Configuration
+// bits[23] SyncFloodOnDramTempErr = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x180), // Address
+      0x00800000,                           // regData
+      0x00800000,                           // regMask
+    }}
+  },
+// F3x188 - NB Extended Configuration Low Register
+// bit[22] = DisHldReg2
+// Errata #346
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Cx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x188), // Address
+      0x00400000,                           // regData
+      0x00400000,                           // regMask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F10RevCPciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10RevCPciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10RevCPciRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCSwC1e.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCSwC1e.c
new file mode 100644
index 0000000000..104d3a1119
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCSwC1e.c
@@ -0,0 +1,181 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 SW C1e feature support functions.
+ *
+ * Provides the functions necessary to initialize the software C1e feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuSwC1e.h"
+#include "cpuApicUtilities.h"
+#include "cpuF10PowerMgmt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_F10REVCSWC1E_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F10InitializeSwC1eOnCore (
+  IN       VOID *IntPendMsr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should software C1e be enabled
+ *
+ * @param[in]    SwC1eServices      Pointer to this CPU's SW C1e family services.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               SW C1e is supported.
+ *
+ */
+BOOLEAN
+STATIC
+F10IsSwC1eSupported (
+  IN       SW_C1E_FAMILY_SERVICES *SwC1eServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  return TRUE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable Software C1e on a family 10h CPU.
+ *
+ * @param[in]    SwC1eServices      Pointer to this CPU's SW C1e family services.
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F10InitializeSwC1e (
+  IN       SW_C1E_FAMILY_SERVICES *SwC1eServices,
+  IN       UINT64 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 LocalMsrRegister;
+  AP_TASK TaskPtr;
+
+  LocalMsrRegister = 0;
+  ((INTPEND_MSR *) &LocalMsrRegister)->IoMsgAddr = PlatformConfig->C1ePlatformData1;
+  ((INTPEND_MSR *) &LocalMsrRegister)->IoMsgData = PlatformConfig->C1ePlatformData2;
+  ((INTPEND_MSR *) &LocalMsrRegister)->IoRd = 0;
+  ((INTPEND_MSR *) &LocalMsrRegister)->C1eOnCmpHalt = 0;
+  ((INTPEND_MSR *) &LocalMsrRegister)->SmiOnCmpHalt = 1;
+
+  TaskPtr.FuncAddress.PfApTaskI = F10InitializeSwC1eOnCore;
+  TaskPtr.DataTransfer.DataSizeInDwords = 2;
+  TaskPtr.DataTransfer.DataPtr = &LocalMsrRegister;
+  TaskPtr.DataTransfer.DataTransferFlags = 0;
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+  ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, NULL);
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable Software C1e on a family 10h core.
+ *
+ * @param[in]    IntPendMsr         MSR value to write to C001_0055 as determined by core 0.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F10InitializeSwC1eOnCore (
+  IN       VOID *IntPendMsr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64  LocalMsrRegister;
+
+  // Enable C1e
+  LibAmdMsrWrite (MSR_INTPEND, (UINT64 *) IntPendMsr, StdHeader);
+
+  // Set OS Visible Workaround Status BIT1 to indicate that C1e
+  // is enabled.
+  LibAmdMsrRead (MSR_OSVW_Status, &LocalMsrRegister, StdHeader);
+  LocalMsrRegister |= BIT1;
+  LibAmdMsrWrite (MSR_OSVW_Status, &LocalMsrRegister, StdHeader);
+}
+
+
+CONST SW_C1E_FAMILY_SERVICES ROMDATA F10SwC1e =
+{
+  0,
+  F10IsSwC1eSupported,
+  F10InitializeSwC1e
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCUtilities.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCUtilities.c
new file mode 100644
index 0000000000..dd87ad355b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/F10RevCUtilities.c
@@ -0,0 +1,495 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 revision Cx specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 10h rev C.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF10PowerMgmt.h"
+#include "GeneralServices.h"
+#include "cpuEarlyInit.h"
+#include "cpuPostInit.h"
+#include "cpuFeatures.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_F10REVCUTILITIES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set down core register on a revision C processor.
+ *
+ * This function set F3x190 Downcore Control Register[5:0]
+ *
+ * @param[in]   FamilySpecificServices   The current Family Specific Services.
+ * @param[in]   Socket                   Socket ID.
+ * @param[in]   Module                   Module ID in socket.
+ * @param[in]   LeveledCores             Number of core.
+ * @param[in]   CoreLevelMode            Core level mode.
+ * @param[in]   StdHeader                Header for library and services.
+ *
+ * @retval      TRUE                     Down Core register is updated.
+ * @retval      FALSE                    Down Core register is not updated.
+ */
+BOOLEAN
+F10CommonRevCSetDownCoreRegister (
+  IN       CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices,
+  IN       UINT32 *Socket,
+  IN       UINT32 *Module,
+  IN       UINT32 *LeveledCores,
+  IN       CORE_LEVELING_TYPE CoreLevelMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32    TempVar32_a;
+  UINT32    CoreDisableBits;
+  PCI_ADDR  PciAddress;
+  BOOLEAN   IsUpdated;
+  AGESA_STATUS AgesaStatus;
+
+  IsUpdated = FALSE;
+
+  switch (*LeveledCores) {
+  case 1:
+    CoreDisableBits = DOWNCORE_MASK_SINGLE;
+    break;
+  case 2:
+    CoreDisableBits = DOWNCORE_MASK_DUAL;
+    break;
+  case 3:
+    CoreDisableBits = DOWNCORE_MASK_TRI;
+    break;
+  default:
+    CoreDisableBits = 0;
+    break;
+  }
+
+  if (CoreDisableBits != 0) {
+    if (GetPciAddress (StdHeader, (UINT8) *Socket, (UINT8) *Module, &PciAddress, &AgesaStatus)) {
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = NORTH_BRIDGE_CAPABILITIES_REG;
+
+      LibAmdPciRead (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+      TempVar32_a = (TempVar32_a >> 12) & 0x3;
+      if (TempVar32_a == 0) {
+        CoreDisableBits &= 0x1;
+      } else if (TempVar32_a == 1) {
+        CoreDisableBits &= 0x3;
+      } else if (TempVar32_a == 2) {
+        CoreDisableBits &= 0x7;
+      } else if (TempVar32_a == 3) {
+        CoreDisableBits &= 0x0F;
+      }
+      PciAddress.Address.Register = DOWNCORE_CTRL;
+      LibAmdPciRead (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+      if ((TempVar32_a | CoreDisableBits) != TempVar32_a) {
+        TempVar32_a |= CoreDisableBits;
+        LibAmdPciWrite (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+        IsUpdated = TRUE;
+      }
+    }
+  }
+
+  return IsUpdated;
+}
+
+
+CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F10RevCCoreLeveling =
+{
+  0,
+  F10CommonRevCSetDownCoreRegister
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Get CPU pstate current on a revision C processor.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_IDD_MAX}.
+ *
+ *    This function returns the ProcIddMax.
+ *
+ *  @param[in]     FamilySpecificServices    The current Family Specific Services.
+ *  @param[in]     Pstate                    The P-state to check.
+ *  @param[out]    ProcIddMax                P-state current in mA.
+ *  @param[in]     StdHeader                 Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                      P-state is enabled
+ *  @retval        FALSE                     P-state is disabled
+ */
+BOOLEAN
+F10CommonRevCGetProcIddMax (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT8                  Pstate,
+     OUT   UINT32                 *ProcIddMax,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       IddDiv;
+  UINT32       CmpCap;
+  UINT32       LocalPciRegister;
+  UINT32       MsrAddress;
+  UINT32       SinglePlaneNbIdd;
+  UINT64       PstateMsr;
+  BOOLEAN      IsPstateEnabled;
+  PCI_ADDR     PciAddress;
+
+  IsPstateEnabled = FALSE;
+
+  MsrAddress = (UINT32) (Pstate + PS_REG_BASE);
+
+  ASSERT (MsrAddress <= PS_MAX_REG);
+
+  LibAmdMsrRead (MsrAddress, &PstateMsr, StdHeader);
+  if (((PSTATE_MSR *) &PstateMsr)->PsEnable == 1) {
+    OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = NB_CAPS_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3xE8
+    CmpCap = (UINT32) (((NB_CAPS_REGISTER *) &LocalPciRegister)->CmpCapLo);
+    CmpCap++;
+
+    switch (((PSTATE_MSR *) &PstateMsr)->IddDiv) {
+    case 0:
+      IddDiv = 1000;
+      break;
+    case 1:
+      IddDiv = 100;
+      break;
+    case 2:
+      IddDiv = 10;
+      break;
+    default:  // IddDiv = 3 is reserved. Use 10
+      ASSERT (FALSE);
+      IddDiv = 10;
+      break;
+    }
+
+    PciAddress.Address.Register = PW_CTL_MISC_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3xE8
+    if (((POWER_CTRL_MISC_REGISTER *) &LocalPciRegister)->PviMode == 1) {
+      *ProcIddMax = (UINT32) ((PSTATE_MSR *) &PstateMsr)->IddValue * IddDiv * CmpCap;
+    } else {
+      PciAddress.Address.Register = PRCT_INFO_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3xE8
+      SinglePlaneNbIdd = ((PRODUCT_INFO_REGISTER *) &LocalPciRegister)->SinglePlaneNbIdd;
+      SinglePlaneNbIdd <<= 1;
+      *ProcIddMax = ((UINT32) ((PSTATE_MSR *) &PstateMsr)->IddValue * IddDiv * CmpCap) - SinglePlaneNbIdd;
+    }
+    IsPstateEnabled = TRUE;
+  }
+  return IsPstateEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns whether or not BIOS is responsible for configuring the NB COFVID.
+ *
+ *  @CpuServiceMethod{::F_CPU_IS_NBCOF_INIT_NEEDED}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]   PciAddress               The northbridge to query by pci base address.
+ *  @param[out]  NbVidUpdateAll           Do all NbVids need to be updated
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      TRUE                    Perform northbridge frequency and voltage config.
+ *  @retval      FALSE                   Do not configure them.
+ */
+BOOLEAN
+F10CommonRevCGetNbCofVidUpdate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       PCI_ADDR *PciAddress,
+     OUT   BOOLEAN *NbVidUpdateAll,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 ProductInfoRegister;
+
+  PciAddress->Address.Register = PRCT_INFO_REG;
+  PciAddress->Address.Function = FUNC_3;
+  LibAmdPciRead (AccessWidth32, *PciAddress, &ProductInfoRegister, StdHeader);
+  *NbVidUpdateAll = (BOOLEAN) (((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->NbVidUpdateAll == 1);
+  return (BOOLEAN) (((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->NbCofVidUpdate == 1);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Determines the NB clock on the desired node.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_NB_PSTATE_INFO}.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     PlatformConfig          Platform profile/build option config structure.
+ *  @param[in]     PciAddress              The segment, bus, and device numbers of the CPU in question.
+ *  @param[in]     NbPstate                The NB P-state number to check.
+ *  @param[out]    FreqNumeratorInMHz      The desired node's frequency numerator in megahertz.
+ *  @param[out]    FreqDivisor             The desired node's frequency divisor.
+ *  @param[out]    VoltageInuV             The desired node's voltage in microvolts.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                    NbPstate is valid
+ *  @retval        FALSE                   NbPstate is disabled or invalid
+ */
+BOOLEAN
+F10CommonRevCGetNbPstateInfo (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+  IN       UINT32                 NbPstate,
+     OUT   UINT32                 *FreqNumeratorInMHz,
+     OUT   UINT32                 *FreqDivisor,
+     OUT   UINT32                 *VoltageInuV,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32   NbFid;
+  UINT32   NbVid;
+  UINT32   LocalPciRegister;
+  UINT32   ProductInfoRegister;
+  UINT64   LocalMsrRegister;
+  BOOLEAN  PstateIsValid;
+
+  PstateIsValid = TRUE;
+  if (NbPstate == 0) {
+    *FreqDivisor = 1;
+  } else if ((NbPstate == 1) && FamilySpecificServices->IsNbPstateEnabled (FamilySpecificServices, PlatformConfig, StdHeader)) {
+    *FreqDivisor = 2;
+  } else {
+    PstateIsValid = FALSE;
+  }
+  if (PstateIsValid) {
+    PciAddress->Address.Function = FUNC_3;
+    PciAddress->Address.Register = PRCT_INFO_REG;
+    LibAmdPciRead (AccessWidth32, *PciAddress, &ProductInfoRegister, StdHeader);
+    if ((((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->NbCofVidUpdate) == 0) {
+      PciAddress->Address.Register = CPTC0_REG;
+      LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+      NbFid = ((CLK_PWR_TIMING_CTRL_REGISTER *) &LocalPciRegister)->NbFid;
+      LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+      NbVid = (UINT32) ((COFVID_STS_MSR *) &LocalMsrRegister)->CurNbVid;
+    } else {
+      NbFid = ((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->SinglePlaneNbFid;
+      NbVid = ((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->SinglePlaneNbVid;
+      PciAddress->Address.Register = PW_CTL_MISC_REG;
+      LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+      if (((POWER_CTRL_MISC_REGISTER *) &LocalPciRegister)->PviMode == 0) {
+        NbFid += ((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->DualPlaneNbFidOff;
+        NbVid -= ((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->DualPlaneNbVidOff;
+      }
+    }
+    *FreqNumeratorInMHz = ((NbFid + 4) * 200);
+    *VoltageInuV = (1550000 - (12500 * NbVid));
+  }
+  return PstateIsValid;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the node's minimum and maximum northbridge frequency.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_MIN_MAX_NB_FREQ}.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     PlatformConfig          Platform profile/build option config structure.
+ *  @param[in]     PciAddress              The segment, bus, and device numbers of the CPU in question.
+ *  @param[out]    MinFreqInMHz            The node's miminum northbridge frequency.
+ *  @param[out]    MaxFreqInMHz            The node's maximum northbridge frequency.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        AGESA_STATUS            Northbridge frequency is valid
+ */
+AGESA_STATUS
+F10RevCGetMinMaxNbFrequency (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+     OUT   UINT32                 *MinFreqInMHz,
+     OUT   UINT32                 *MaxFreqInMHz,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32         NbPstateEn;
+  UINT32         NbFid;
+  UINT32         FreqDivisor;
+  UINT32         FreqNumerator;
+  UINT32         LocalPciRegister;
+  UINT32         ProductInfoRegister;
+  CPU_LOGICAL_ID LogicalId;
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+
+  FreqDivisor = 1;
+
+  // If NB P-state is supported, return the frequency of NB P-state 1
+  if ((PlatformConfig->PlatformProfile.PlatformPowerPolicy != Performance) &&
+     ((LogicalId.Revision & AMD_F10_C3) != 0)) {
+    PciAddress->Address.Function = FUNC_3;
+    PciAddress->Address.Register = 0x1F0;
+    LibAmdPciReadBits (*PciAddress, 18, 16, &NbPstateEn, StdHeader);
+
+    if (NbPstateEn != 0) {
+      FreqDivisor = 2;
+    }
+  }
+
+  PciAddress->Address.Function = FUNC_3;
+  PciAddress->Address.Register = PRCT_INFO_REG;
+  LibAmdPciRead (AccessWidth32, *PciAddress, &ProductInfoRegister, StdHeader);
+
+  if ((((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->NbCofVidUpdate) == 0) {
+    PciAddress->Address.Register = CPTC0_REG;
+    LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+    NbFid = ((CLK_PWR_TIMING_CTRL_REGISTER *) &LocalPciRegister)->NbFid;
+  } else {
+    NbFid = ((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->SinglePlaneNbFid;
+    PciAddress->Address.Register = PW_CTL_MISC_REG;
+    LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+    if (((POWER_CTRL_MISC_REGISTER *) &LocalPciRegister)->PviMode == 0) {
+      NbFid += ((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->DualPlaneNbFidOff;
+    }
+  }
+
+  FreqNumerator = ((NbFid + 4) * 200);
+  *MaxFreqInMHz = FreqNumerator;
+  *MinFreqInMHz = (FreqNumerator / FreqDivisor);
+
+  return AGESA_SUCCESS;
+
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is the Northbridge PState feature enabled?
+ *
+ * @CpuServiceMethod{::F_IS_NB_PSTATE_ENABLED}.
+ *
+ * @param[in]      FamilySpecificServices         The current Family Specific Services.
+ * @param[in]      PlatformConfig                 Platform profile/build option config structure.
+ * @param[in]      StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ * @retval         TRUE                           The NB PState feature is enabled.
+ * @retval         FALSE                          The NB PState feature is not enabled.
+ */
+BOOLEAN
+F10CommonRevCIsNbPstateEnabled (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32         NbPstate;
+  PCI_ADDR       PciAddress;
+  CPU_LOGICAL_ID LogicalId;
+  BOOLEAN        Result;
+
+  Result = FALSE;
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+  if (((LogicalId.Revision & AMD_F10_C3) != 0) && (!IsNonCoherentHt1 (StdHeader))) {
+    OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = 0x1F0;
+    LibAmdPciReadBits (PciAddress, 18, 16, &NbPstate, StdHeader);
+    if (NbPstate != 0) {
+      Result = TRUE;
+    }
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the number of physical cores of current processor.
+ *
+ * @CpuServiceMethod{::F_CPU_NUMBER_OF_PHYSICAL_CORES}.
+ *
+ * @param[in]      FamilySpecificServices         The current Family Specific Services.
+ * @param[in]      StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ * @return         The number of physical cores.
+ */
+UINT8
+F10CommonRevCGetNumberOfPhysicalCores (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       LocalPciRegister;
+  PCI_ADDR     PciAddress;
+
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = NB_CAPS_REG;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  return (UINT8) (((NB_CAPS_REGISTER *) &LocalPciRegister)->CmpCapLo + 1);
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbEquivalenceTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbEquivalenceTable.c
new file mode 100644
index 0000000000..0f773a2ec4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbEquivalenceTable.c
@@ -0,0 +1,110 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 RB Equivalence Table related data
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_RB_F10RBEQUIVALENCETABLE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT16 ROMDATA CpuF10RbMicrocodeEquivalenceTable[] =
+{
+  0x1040, 0x1040,
+  0x1041, 0x1041,
+  0x1042, 0x1041,
+  0x1043, 0x1043
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the appropriate microcode patch equivalent ID table.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  RbEquivalenceTablePtr    Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10RbMicrocodeEquivalenceTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **RbEquivalenceTablePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = ((sizeof (CpuF10RbMicrocodeEquivalenceTable) / sizeof (UINT16)) / 2);
+  *RbEquivalenceTablePtr = CpuF10RbMicrocodeEquivalenceTable;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbHtPhyTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbHtPhyTables.c
new file mode 100644
index 0000000000..646ab56737
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbHtPhyTables.c
@@ -0,0 +1,120 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 RB PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_RB_F10RBHTPHYTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  HT   Phy   T a b l e s
+// -------------------------
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10RbHtPhyRegisters[] =
+{
+// Erratum 354
+// 0x40:0x48
+  {
+    HtPhyRangeRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      (AMD_F10_RB_C1)                     // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0x40, 0x48,                           // Address
+      0x00000040,                           // regData
+      0x00000040,                           // regMask
+    }}
+  },
+// 0x50:0x58
+  {
+    HtPhyRangeRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      (AMD_F10_RB_C1)                     // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0x50, 0x58,                           // Address
+      0x00000040,                           // regData
+      0x00000040,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10RbHtPhyRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10RbHtPhyRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10RbHtPhyRegisters
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbLogicalIdTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbLogicalIdTables.c
new file mode 100644
index 0000000000..bca98a43bf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbLogicalIdTables.c
@@ -0,0 +1,114 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 RB Logical ID Table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_RB_F10RBLOGICALIDTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+STATIC CONST CPU_LOGICAL_ID_XLAT ROMDATA CpuF10RbLogicalIdAndRevArray[] =
+{
+  {
+    0x1040,
+    AMD_F10_RB_C0
+  },
+  {
+    0x1041,
+    AMD_F10_RB_C1
+  },
+  {
+    0x1042,
+    AMD_F10_RB_C2
+  },
+  {
+    0x1043,
+    AMD_F10_RB_C3
+  }
+};
+
+VOID
+GetF10RbLogicalIdAndRev (
+     OUT   CONST CPU_LOGICAL_ID_XLAT **RbIdPtr,
+     OUT   UINT8 *NumberOfElements,
+     OUT   UINT64 *LogicalFamily,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = (sizeof (CpuF10RbLogicalIdAndRevArray) / sizeof (CPU_LOGICAL_ID_XLAT));
+  *RbIdPtr = CpuF10RbLogicalIdAndRevArray;
+  *LogicalFamily = AMD_FAMILY_10_RB;
+}
+
+//CONST LOGICAL_ID_TABLE ROMDATA CpuF10RbLogicalIdAndRev =
+//{
+//  (sizeof (CpuF10RbLogicalIdAndRevArray) / sizeof (CPU_LOGICAL_ID_XLAT)),
+//  (CPU_LOGICAL_ID_XLAT *) &CpuF10RbLogicalIdAndRevArray
+//};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbMicrocodePatchTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbMicrocodePatchTables.c
new file mode 100644
index 0000000000..d4c65d16c0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbMicrocodePatchTables.c
@@ -0,0 +1,106 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 RB microcode patches
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_RB_F10RBMICROCODEPATCHTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern CONST MICROCODE_PATCHES ROMDATA *CpuF10RbMicroCodePatchArray[];
+extern CONST UINT8 ROMDATA CpuF10RbNumberOfMicrocodePatches;
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns a table containing the appropriate microcode patches.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  RbUcodePtr               Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10RbMicroCodePatchesStruct (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **RbUcodePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = CpuF10RbNumberOfMicrocodePatches;
+  *RbUcodePtr = &CpuF10RbMicroCodePatchArray[0];
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbMsrTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbMsrTables.c
new file mode 100644
index 0000000000..9c6b0c3c43
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbMsrTables.c
@@ -0,0 +1,120 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 RB, MSR tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_RB_F10RBMSRTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F10RbMsrRegisters[] =
+{
+//  M S R    T a b l e s
+// ----------------------
+
+// MSR_DC_CFG (0xC0011022)
+// bits[43:42] = 0
+// Errata #326
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                       // CpuFamily
+      AMD_F10_RB_C0                        // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},                     // platformFeatures
+    {{
+      MSR_DC_CFG,                            // MSR Address
+      0x0000000000000000,                    // OR Mask
+      0x00000C0000000000,                    // NAND Mask
+    }}
+  },
+
+// MSR_BU_CFG (0xC0011023)
+// Erratum #309 BU_CFG[23]=1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_RB_C0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_BU_CFG,                            // MSR Address
+      (1 << 23),                             // OR Mask
+      (1 << 23),                             // NAND Mask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F10RbMsrRegisterTable = {
+  AllCores,
+  (sizeof (F10RbMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F10RbMsrRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbPciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbPciTables.c
new file mode 100644
index 0000000000..35042a2c17
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevC/RB/F10RbPciTables.c
@@ -0,0 +1,234 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 RB PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVC_RB_F10RBPCITABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10RbPciRegisters[] =
+{
+  // Function 0
+
+// F0x16C - Link Global Extended Control Register, Errata 351
+// bit[15:13] ForceFullT0 = 0
+// bit[5:0] T0Time = 0x14
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      (AMD_F10_RB_C0 | AMD_F10_RB_C1 | AMD_F10_RB_C2)     // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x00000014,                           // regData
+      0x0000E03F,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[7:6] InLnSt = 0x01
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_RB_C3                       // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x00000040,                           // regData
+      0x000000C0,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[15:13] ForceFullT0 = 6
+// bit[9] RXCalEn = 1
+// bit[5:0] T0Time = 0x26
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_RB_C3                      // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x0000C226,                           // regData
+      0x0000E23F,                           // regMask
+    }}
+  },
+// F0x170 - Link Extended Control Register - Link 0, sublink 0
+// Errata 351 (only need to override single link case.)
+// bit[8] LS2En = 0,
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+     (AMD_F10_RB_C0 | AMD_F10_RB_C1 | AMD_F10_RB_C2)     // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x170), // Address
+      0x00000000,                           // regData
+      0x00000100,                           // regMask
+    }}
+  },
+
+
+// F3xA0 - Power Control Miscellaneous
+// bits[13:11] PllLockTime = 5
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_RB_C0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0),  // Address
+      0x00002800,                           // regData
+      0x00003800,                           // regMask
+    }}
+  },
+// F3xA0 - Power Control Miscellaneous
+// bits[28] NbPstateForce = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_RB_C3                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0),  // Address
+      0x10000000,                           // regData
+      0x10000000,                           // regMask
+    }}
+  },
+// F3xDC - Clock Power Timing Control 2
+// bits[14:12] NbsynPtrAdj = 6
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_RB_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xDC),  // Address
+      0x00006000,                           // regData
+      0x00007000,                           // regMask
+    }}
+  },
+// F3xDC - Clock Power Timing Control 2
+// bits[14:12] NbsynPtrAdj = 5
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xDC),  // Address
+      0x00005000,                           // regData
+      0x00007000,                           // regMask
+    }}
+  },
+// F3xDC - Clock Power Timing Control 2
+// bits[14:12] NbsynPtrAdj = 5
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_C3                            // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platformFeatures
+    {{
+      PERFORMANCE_NB_PSTATES_ENABLE,        // PerformanceFeatures
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xDC),  // Address
+      0x00005000,                           // regData
+      0x00007000,                           // regMask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F10RbPciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10RbPciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10RbPciRegisters,
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10MicrocodePatch010000c5.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10MicrocodePatch010000c5.c
new file mode 100644
index 0000000000..81e2c5820a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10MicrocodePatch010000c5.c
@@ -0,0 +1,1039 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Microcode patch.
+ *
+ * Fam10 Microcode Patch rev 010000c5 for 1080 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10/REVD
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+// Patch code 010000c5 for 1080 and equivalent
+CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000c5 =
+{{
+0x10,
+0x20,
+0x05,
+0x03,
+0xc5,
+0x00,
+0x00,
+0x01,
+0x00,
+0x80,
+0x20,
+0x00,
+0x83,
+0xc5,
+0x93,
+0xcd,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x80,
+0x10,
+0x00,
+0x00,
+0x00,
+0xaa,
+0xaa,
+0xaa,
+0x89,
+0x0b,
+0x00,
+0x00,
+0x55,
+0x03,
+0x00,
+0x00,
+0xff,
+0xff,
+0xff,
+0xff,
+0x51,
+0x03,
+0x00,
+0x00,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xf8,
+0xff,
+0x2e,
+0xc3,
+0x3f,
+0xd7,
+0xfd,
+0xac,
+0xff,
+0xff,
+0xbb,
+0x0f,
+0xff,
+0x5c,
+0xd7,
+0xf3,
+0xdf,
+0xfd,
+0xc7,
+0x3f,
+0xfc,
+0xe3,
+0xf5,
+0x00,
+0x1d,
+0xd5,
+0x00,
+0x00,
+0xfd,
+0xff,
+0x7f,
+0xfa,
+0xe1,
+0xd9,
+0xca,
+0x00,
+0x66,
+0xfa,
+0x71,
+0x80,
+0x07,
+0x7f,
+0x40,
+0x67,
+0xd9,
+0xff,
+0xff,
+0xde,
+0x1d,
+0x7e,
+0xb1,
+0x00,
+0xe0,
+0xff,
+0x7b,
+0x0e,
+0x40,
+0xbd,
+0x55,
+0xe0,
+0x73,
+0xd0,
+0x0f,
+0xff,
+0x00,
+0xe0,
+0xff,
+0x13,
+0xf2,
+0xc3,
+0xbb,
+0xff,
+0x8b,
+0xf8,
+0xff,
+0x44,
+0x59,
+0x0e,
+0x7f,
+0x34,
+0x00,
+0x10,
+0x59,
+0xfb,
+0x07,
+0xe0,
+0xfb,
+0xc7,
+0x06,
+0x38,
+0xf0,
+0xfe,
+0x7f,
+0x94,
+0x9b,
+0x1f,
+0xe0,
+0xe7,
+0xe1,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0xff,
+0x1e,
+0x00,
+0xe8,
+0xff,
+0x8c,
+0x07,
+0xf0,
+0xf4,
+0x43,
+0xf9,
+0x3c,
+0x7e,
+0x33,
+0x0e,
+0xc0,
+0xd0,
+0x0f,
+0xe5,
+0xf3,
+0xf7,
+0xcb,
+0x38,
+0x00,
+0x43,
+0x3f,
+0x94,
+0xcf,
+0x0c,
+0x94,
+0x0c,
+0x00,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1b,
+0xfe,
+0x01,
+0xfc,
+0xe0,
+0x3f,
+0xf0,
+0x0f,
+0x6f,
+0xf8,
+0x07,
+0xf0,
+0x80,
+0xff,
+0xc0,
+0x3f,
+0xbf,
+0xe1,
+0x1f,
+0xc0,
+0x00,
+0xfe,
+0xbf,
+0x07,
+0x03,
+0xf4,
+0xff,
+0xff,
+0xc8,
+0x0f,
+0xef,
+0x52,
+0x4f,
+0x30,
+0xbf,
+0xe0,
+0xe0,
+0x3a,
+0xfc,
+0x31,
+0x0f,
+0xc0,
+0xd3,
+0xd5,
+0x0c,
+0x70,
+0xe0,
+0xcf,
+0x03,
+0x00,
+0xac,
+0x5c,
+0x7f,
+0x00,
+0xae,
+0x97,
+0x6c,
+0x80,
+0x03,
+0x7f,
+0xfe,
+0x01,
+0x78,
+0x6e,
+0xb1,
+0x01,
+0x0e,
+0xfc,
+0xf9,
+0x07,
+0xe0,
+0xf7,
+0xc7,
+0x06,
+0x38,
+0xf0,
+0x8b,
+0x01,
+0x80,
+0x5f,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0x1f,
+0xf8,
+0x07,
+0xf0,
+0xfc,
+0x03,
+0xf8,
+0x37,
+0xff,
+0xf7,
+0x00,
+0xc0,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1b,
+0xfe,
+0x01,
+0xfc,
+0xe0,
+0xff,
+0x7b,
+0x00,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x00,
+0xf0,
+0xff,
+0x3d,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0x1e,
+0x00,
+0xf8,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x7f,
+0x0f,
+0x00,
+0xfc,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0xbf,
+0x07,
+0x00,
+0xfc,
+0x07,
+0xfe,
+0x01,
+0x0d,
+0xff,
+0x00,
+0xfe,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xfe,
+0x03,
+0xff,
+0xff,
+0x86,
+0x7f,
+0x00,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x01,
+0x80,
+0xff,
+0xef,
+0x7f,
+0x00,
+0xff,
+0x81,
+0x80,
+0x7f,
+0xc3,
+0x3f,
+0xfe,
+0x01,
+0xfc,
+0x07,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xd7,
+0x00,
+0x40,
+0xf9,
+0xc0,
+0x3f,
+0x80,
+0xff,
+0x1f,
+0xc0,
+0xbf,
+0xe1,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0xfc,
+0x6b,
+0x00,
+0x80,
+0x7f,
+0xe0,
+0x1f,
+0xc0,
+0xf0,
+0x0f,
+0xe0,
+0xdf,
+0xff,
+0x81,
+0x7f,
+0x00,
+0xc3,
+0x3f,
+0x80,
+0x7f,
+0xfc,
+0x07,
+0xfe,
+0x01,
+0x0d,
+0xff,
+0x00,
+0xfe,
+0xf0,
+0xff,
+0x3d,
+0x00,
+0xe0,
+0x3f,
+0xf0,
+0x0f,
+0x6f,
+0xf8,
+0x07,
+0xf0,
+0x80,
+0xff,
+0xc0,
+0x3f,
+0xbf,
+0xe1,
+0x1f,
+0xc0,
+0x00,
+0xfe,
+0x03,
+0xff,
+0xff,
+0x86,
+0x7f,
+0x00,
+0x00,
+0xf8,
+0xff,
+0x1e,
+0x07,
+0xf0,
+0x1f,
+0xf8,
+0xf8,
+0x37,
+0xfc,
+0x03,
+0x1f,
+0xc0,
+0x7f,
+0xe0,
+0xe0,
+0xdf,
+0xf0,
+0x0f,
+0x7f,
+0x00,
+0xff,
+0x81,
+0x80,
+0x7f,
+0xc3,
+0x3f,
+0x0f,
+0x00,
+0xfc,
+0x7f,
+0xfc,
+0x03,
+0xf8,
+0x0f,
+0x01,
+0xfc,
+0x1b,
+0xfe,
+0xf0,
+0x0f,
+0xe0,
+0x3f,
+0x07,
+0xf0,
+0x6f,
+0xf8,
+0xc0,
+0x3f,
+0x80,
+0xff,
+0x1f,
+0xc0,
+0xbf,
+0xe1,
+0xbf,
+0x07,
+0x00,
+0xfe,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0x1f,
+0xf8,
+0x07,
+0xf0,
+0xfc,
+0x03,
+0xf8,
+0x37,
+0x7f,
+0xe0,
+0x1f,
+0xc0,
+0xf0,
+0x0f,
+0xe0,
+0xdf,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0x0f,
+0xfc,
+0x03,
+0x1b,
+0xfe,
+0x01,
+0xfc,
+0xe0,
+0x3f,
+0xf0,
+0x0f,
+0x6f,
+0xf8,
+0x07,
+0xf0,
+0x80,
+0xff,
+0xef,
+0x01,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x07,
+0xf0,
+0x1f,
+0xf8,
+0xf8,
+0x37,
+0xfc,
+0x03,
+0x00,
+0xc0,
+0xff,
+0xf7,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0xfc,
+0x03,
+0xf8,
+0x0f,
+0x01,
+0xfc,
+0x1b,
+0xfe,
+0x7b,
+0x00,
+0xe0,
+0xff,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0x3d,
+0x00,
+0xf0,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0xff,
+0x1e,
+0x00,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x00,
+0xfc,
+0x7f,
+0x0f,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0x07,
+0x00,
+0xfe,
+0xbf,
+0xfe,
+0x01,
+0xfc,
+0x07,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0xdf,
+0x03,
+0x00,
+0xff,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xef,
+0x01,
+0x80
+}};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10MicrocodePatch010000d9.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10MicrocodePatch010000d9.c
new file mode 100644
index 0000000000..534f0e89ee
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10MicrocodePatch010000d9.c
@@ -0,0 +1,1066 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Microcode patch.
+ *
+ * Fam10 Microcode Patch rev 010000D9 for 1081 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10/RevD
+ * @e \$Revision: 60726 $   @e \$Date: 2011-10-20 17:08:02 -0600 (Thu, 20 Oct 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright 2008 - 2012 ADVANCED MICRO DEVICES, INC.  All Rights Reserved.
+ *
+ * AMD is granting you permission to use this software (the Materials)
+ * pursuant to the terms and conditions of your Software License Agreement
+ * with AMD.  This header does *NOT* give you permission to use the Materials
+ * or any rights under AMD's intellectual property.  Your use of any portion
+ * of these Materials shall constitute your acceptance of those terms and
+ * conditions.  If you do not agree to the terms and conditions of the Software
+ * License Agreement, please do not use any portion of these Materials.
+ *
+ * CONFIDENTIALITY:  The Materials and all other information, identified as
+ * confidential and provided to you by AMD shall be kept confidential in
+ * accordance with the terms and conditions of the Software License Agreement.
+ *
+ * LIMITATION OF LIABILITY: THE MATERIALS AND ANY OTHER RELATED INFORMATION
+ * PROVIDED TO YOU BY AMD ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED
+ * WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
+ * MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY PARTICULAR PURPOSE,
+ * OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR USAGE OF TRADE.
+ * IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER
+ * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS
+ * INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF AMD'S NEGLIGENCE,
+ * GROSS NEGLIGENCE, THE USE OF OR INABILITY TO USE THE MATERIALS OR ANY OTHER
+ * RELATED INFORMATION PROVIDED TO YOU BY AMD, EVEN IF AMD HAS BEEN ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.  BECAUSE SOME JURISDICTIONS PROHIBIT THE
+ * EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES,
+ * THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
+ *
+ * AMD does not assume any responsibility for any errors which may appear in
+ * the Materials or any other related information provided to you by AMD, or
+ * result from use of the Materials or any related information.
+ *
+ * You agree that you will not reverse engineer or decompile the Materials.
+ *
+ * NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any
+ * further information, software, technical information, know-how, or show-how
+ * available to you.  Additionally, AMD retains the right to modify the
+ * Materials at any time, without notice, and is not obligated to provide such
+ * modified Materials to you.
+ *
+ * U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with
+ * "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is
+ * subject to the restrictions as set forth in FAR 52.227-14 and
+ * DFAR252.227-7013, et seq., or its successor.  Use of the Materials by the
+ * Government constitutes acknowledgement of AMD's proprietary rights in them.
+ *
+ * EXPORT ASSURANCE:  You agree and certify that neither the Materials, nor any
+ * direct product thereof will be exported directly or indirectly, into any
+ * country prohibited by the United States Export Administration Act and the
+ * regulations thereunder, without the required authorization from the U.S.
+ * government nor will be used for any purpose prohibited by the same.
+ *
+ ***************************************************************************/
+
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+// Patch code 010000d9 for 1081 and equivalent
+CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000d9 =
+{{
+  0x11,
+  0x20,
+  0x12,
+  0x10,
+  0xd9,
+  0x00,
+  0x00,
+  0x01,
+  0x00,
+  0x80,
+  0x20,
+  0x00,
+  0x6e,
+  0x87,
+  0xd2,
+  0xea,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x81,
+  0x10,
+  0x00,
+  0x00,
+  0x00,
+  0xaa,
+  0xaa,
+  0xaa,
+  0xa7,
+  0x0b,
+  0x00,
+  0x00,
+  0x14,
+  0x0c,
+  0x00,
+  0x00,
+  0x55,
+  0x03,
+  0x00,
+  0x00,
+  0x08,
+  0x0a,
+  0x00,
+  0x00,
+  0x51,
+  0x03,
+  0x00,
+  0x00,
+  0x0c,
+  0x0e,
+  0x00,
+  0x00,
+  0xc4,
+  0x07,
+  0x00,
+  0x00,
+  0x9a,
+  0x0b,
+  0x00,
+  0x00,
+  0x4f,
+  0xdf,
+  0x38,
+  0x00,
+  0x81,
+  0x3f,
+  0x20,
+  0xc0,
+  0x4e,
+  0xf0,
+  0xff,
+  0xbf,
+  0x0f,
+  0xff,
+  0x5e,
+  0x3f,
+  0xf0,
+  0xdf,
+  0xad,
+  0x07,
+  0x3d,
+  0xf8,
+  0x7b,
+  0x7b,
+  0x80,
+  0x00,
+  0xd4,
+  0x00,
+  0x13,
+  0xf1,
+  0xff,
+  0xff,
+  0xac,
+  0xe1,
+  0x1f,
+  0xe0,
+  0x4e,
+  0xfe,
+  0xbb,
+  0xff,
+  0xfe,
+  0x87,
+  0x7f,
+  0xa7,
+  0x03,
+  0xf8,
+  0x7f,
+  0xd6,
+  0x7c,
+  0x1e,
+  0xfa,
+  0xbd,
+  0x00,
+  0xe0,
+  0xff,
+  0x7b,
+  0x0e,
+  0x00,
+  0x3d,
+  0x57,
+  0xe0,
+  0x73,
+  0xd0,
+  0x0f,
+  0xff,
+  0x2e,
+  0xfe,
+  0xff,
+  0xc0,
+  0xcf,
+  0xc3,
+  0x3f,
+  0xeb,
+  0x01,
+  0xfc,
+  0x77,
+  0x5a,
+  0x3e,
+  0x0f,
+  0xfd,
+  0x35,
+  0x00,
+  0x90,
+  0x3e,
+  0xff,
+  0x9f,
+  0x00,
+  0xfe,
+  0x65,
+  0x60,
+  0x75,
+  0xf8,
+  0x9f,
+  0xff,
+  0x97,
+  0xff,
+  0x1f,
+  0xe0,
+  0xe7,
+  0xe1,
+  0x03,
+  0xf5,
+  0xde,
+  0xff,
+  0x7e,
+  0x2c,
+  0x9f,
+  0x87,
+  0xff,
+  0x1e,
+  0x00,
+  0xf8,
+  0x6f,
+  0x95,
+  0x03,
+  0x50,
+  0xf4,
+  0x03,
+  0xf8,
+  0x1c,
+  0x7f,
+  0xe0,
+  0x1f,
+  0xc0,
+  0xf0,
+  0x0f,
+  0xe0,
+  0xdf,
+  0xff,
+  0x81,
+  0x7f,
+  0x00,
+  0xc3,
+  0x3f,
+  0x80,
+  0x7f,
+  0x3c,
+  0x40,
+  0x0d,
+  0x00,
+  0x00,
+  0xff,
+  0xff,
+  0x07,
+  0x1f,
+  0xde,
+  0x9d,
+  0x90,
+  0xc4,
+  0xff,
+  0xff,
+  0x5f,
+  0x72,
+  0xf8,
+  0x23,
+  0xca,
+  0x80,
+  0xff,
+  0xc0,
+  0x3f,
+  0xbf,
+  0xe1,
+  0x1f,
+  0xc0,
+  0x00,
+  0xfa,
+  0xbf,
+  0x07,
+  0x00,
+  0xbc,
+  0x63,
+  0xe2,
+  0x86,
+  0x0e,
+  0xf8,
+  0x00,
+  0xe7,
+  0xf0,
+  0x5f,
+  0xf9,
+  0xb8,
+  0x3c,
+  0xec,
+  0x73,
+  0x9f,
+  0xc2,
+  0xff,
+  0xe6,
+  0xe1,
+  0xf2,
+  0xb0,
+  0xcf,
+  0x03,
+  0x00,
+  0x0d,
+  0x50,
+  0xff,
+  0x1e,
+  0xfe,
+  0x2b,
+  0x0f,
+  0x97,
+  0x87,
+  0x7d,
+  0xfc,
+  0x5b,
+  0xf8,
+  0xdf,
+  0x2d,
+  0x5c,
+  0x1e,
+  0xf6,
+  0xf3,
+  0x6f,
+  0xe1,
+  0x3f,
+  0xb7,
+  0x70,
+  0x79,
+  0xd8,
+  0xab,
+  0x01,
+  0x80,
+  0x06,
+  0xff,
+  0xff,
+  0x00,
+  0xfd,
+  0xbb,
+  0x14,
+  0xf2,
+  0xc3,
+  0x2f,
+  0xf8,
+  0x13,
+  0xcc,
+  0x7f,
+  0x0c,
+  0xb8,
+  0x0e,
+  0x74,
+  0xf5,
+  0x03,
+  0xf0,
+  0xf8,
+  0x33,
+  0x03,
+  0x1c,
+  0x2b,
+  0xd7,
+  0x00,
+  0x00,
+  0xeb,
+  0xe5,
+  0x1f,
+  0x80,
+  0xc0,
+  0x1f,
+  0x1b,
+  0xe0,
+  0x9e,
+  0x9b,
+  0x7f,
+  0x00,
+  0x03,
+  0x7f,
+  0x6c,
+  0x80,
+  0xf8,
+  0x7d,
+  0xfe,
+  0x01,
+  0x0e,
+  0xfc,
+  0xb1,
+  0x01,
+  0x80,
+  0xd7,
+  0x62,
+  0x00,
+  0xc0,
+  0x9b,
+  0x53,
+  0x0e,
+  0x75,
+  0xe0,
+  0x0f,
+  0xe8,
+  0x2f,
+  0xff,
+  0xa7,
+  0xff,
+  0xcf,
+  0xc3,
+  0x3f,
+  0xc0,
+  0xbd,
+  0xff,
+  0x07,
+  0xea,
+  0x3e,
+  0x0f,
+  0xfd,
+  0x54,
+  0x00,
+  0x20,
+  0x1f,
+  0x32,
+  0x1f,
+  0xa0,
+  0xff,
+  0xff,
+  0x22,
+  0x3f,
+  0x78,
+  0x77,
+  0x3f,
+  0x80,
+  0xff,
+  0xe7,
+  0x8b,
+  0xfe,
+  0xe0,
+  0x5b,
+  0xff,
+  0x4d,
+  0x0e,
+  0xf8,
+  0x80,
+  0x9f,
+  0x87,
+  0x7f,
+  0x19,
+  0x00,
+  0x90,
+  0x00,
+  0xe0,
+  0x7f,
+  0x02,
+  0x00,
+  0x03,
+  0xfc,
+  0x3c,
+  0xfc,
+  0xeb,
+  0xff,
+  0xca,
+  0xff,
+  0x0f,
+  0xf0,
+  0xf3,
+  0xf0,
+  0x04,
+  0xfe,
+  0x04,
+  0x4c,
+  0x2f,
+  0x03,
+  0xad,
+  0xc3,
+  0xa0,
+  0x0c,
+  0x00,
+  0xe8,
+  0x22,
+  0xf0,
+  0x27,
+  0x90,
+  0xfe,
+  0x18,
+  0x64,
+  0x1d,
+  0xff,
+  0xe3,
+  0xff,
+  0xe4,
+  0xf8,
+  0x07,
+  0xf8,
+  0x79,
+  0xff,
+  0x40,
+  0xbd,
+  0xf3,
+  0xa1,
+  0x9f,
+  0xca,
+  0xe7,
+  0xc8,
+  0x48,
+  0x06,
+  0x00,
+  0xbc,
+  0x61,
+  0xe5,
+  0x00,
+  0x07,
+  0xfe,
+  0x80,
+  0x5e,
+  0xc2,
+  0xff,
+  0xff,
+  0x6f,
+  0x3c,
+  0xfc,
+  0x03,
+  0xfc,
+  0xc9,
+  0xf7,
+  0xff,
+  0xbf,
+  0x7d,
+  0xf0,
+  0xcf,
+  0x74,
+  0x00,
+  0x14,
+  0x50,
+  0x03,
+  0x4d,
+  0x02,
+  0x00,
+  0xfe,
+  0xfe,
+  0x83,
+  0x7f,
+  0xa6,
+  0x6b,
+  0xf9,
+  0x6f,
+  0xfe,
+  0xee,
+  0x0f,
+  0xfe,
+  0xb1,
+  0xef,
+  0xe4,
+  0xbf,
+  0xf9,
+  0xba,
+  0x3f,
+  0xf8,
+  0x77,
+  0x01,
+  0x80,
+  0xff,
+  0xef,
+  0x3f,
+  0x00,
+  0xdf,
+  0xdf,
+  0x36,
+  0xc0,
+  0x81,
+  0x3f,
+  0xff,
+  0xa3,
+  0xdc,
+  0xf4,
+  0x00,
+  0x3f,
+  0x0f,
+  0xff,
+  0xf8,
+  0x07,
+  0xf0,
+  0x1f,
+  0x03,
+  0xf8,
+  0x37,
+  0xfc,
+  0xc5,
+  0x00,
+  0x80,
+  0x63,
+  0x67,
+  0x3c,
+  0x80,
+  0xff,
+  0x1f,
+  0xca,
+  0xe7,
+  0xa1,
+  0x9b,
+  0x71,
+  0x00,
+  0xf6,
+  0x7e,
+  0x28,
+  0x9f,
+  0x87,
+  0x5f,
+  0xc6,
+  0x01,
+  0xb8,
+  0xfa,
+  0xa1,
+  0x7c,
+  0x1e,
+  0xa0,
+  0x64,
+  0x00,
+  0x60,
+  0x99,
+  0x80,
+  0x3f,
+  0xc1,
+  0xf0,
+  0xcb,
+  0x40,
+  0xeb,
+  0xff,
+  0x9d,
+  0x7f,
+  0x3f,
+  0xc3,
+  0xbe,
+  0x87,
+  0xdd,
+  0xfc,
+  0x67,
+  0xfe,
+  0xf9,
+  0x0f,
+  0xfb,
+  0x16,
+  0x76,
+  0xf0,
+  0xff,
+  0x3b,
+  0x00,
+  0xf4,
+  0x82,
+  0xff,
+  0x5f,
+  0x79,
+  0xf8,
+  0xd7,
+  0xfa,
+  0x80,
+  0xff,
+  0x6c,
+  0x3d,
+  0xe0,
+  0xc1,
+  0x9f,
+  0x18,
+  0x00,
+  0x86,
+  0xbe,
+  0x71,
+  0xaf,
+  0x07,
+  0x7f,
+  0x40,
+  0x00,
+  0xf8,
+  0xff,
+  0x1e,
+  0x0f,
+  0x20,
+  0xfe,
+  0xff,
+  0x21,
+  0x3f,
+  0xbc,
+  0x63,
+  0x1f,
+  0xc0,
+  0x7f,
+  0xe0,
+  0xe0,
+  0xdf,
+  0xf0,
+  0x0f,
+  0x7f,
+  0x00,
+  0xff,
+  0x81,
+  0x80,
+  0x7f,
+  0xc3,
+  0x3f,
+  0x0f,
+  0x00,
+  0xfc,
+  0x7f,
+  0xff,
+  0x67,
+  0xf1,
+  0xff,
+  0x00,
+  0xb6,
+  0x1c,
+  0xfe,
+  0xff,
+  0xff,
+  0xc5,
+  0xff,
+  0xf7,
+  0xfa,
+  0x7f,
+  0xf8,
+  0xec,
+  0xbf,
+  0x97,
+  0xff,
+  0xdf,
+  0xab,
+  0xfa,
+  0xe1,
+  0xbf,
+  0x07,
+  0x00,
+  0xfe,
+  0x67,
+  0xeb,
+  0x00,
+  0xec,
+  0xfe,
+  0xc4,
+  0x00,
+  0x0f,
+  0xff,
+  0xff,
+  0xcf,
+  0x02,
+  0xfc,
+  0x63,
+  0xdd,
+  0x3f,
+  0xff,
+  0xf7,
+  0x5f,
+  0xcb,
+  0xf0,
+  0x8e,
+  0x55,
+  0xff,
+  0xff,
+  0xdf,
+  0x03,
+  0x00,
+  0xfe,
+  0xb7,
+  0xff,
+  0x58,
+  0x87,
+  0x3f,
+  0xac,
+  0x2c,
+  0x39,
+  0xe0,
+  0xff,
+  0x17,
+  0x1e,
+  0xfe,
+  0x01,
+  0x7e,
+  0xe0,
+  0xbf,
+  0x18,
+  0x0f,
+  0x3a,
+  0xf0,
+  0x27,
+  0xf6,
+  0x80,
+  0xff,
+  0xef,
+  0x01,
+  0xa2,
+  0x6b,
+  0xfc,
+  0xff,
+  0xcf,
+  0xc3,
+  0x3f,
+  0xd1,
+  0xb3,
+  0x8c,
+  0xff,
+  0xff,
+  0xd7,
+  0x0f,
+  0xff,
+  0x58,
+  0xff,
+  0x32,
+  0xfe,
+  0xff,
+  0x5d,
+  0x3f,
+  0xfc,
+  0x7b,
+  0x00,
+  0xc0,
+  0xff,
+  0xf7,
+  0x3d,
+  0x80,
+  0xff,
+  0x6d,
+  0x18,
+  0xe0,
+  0xc1,
+  0x9f,
+  0xff,
+  0x00,
+  0xfe,
+  0xb3,
+  0x2d,
+  0xfa,
+  0x87,
+  0x6f,
+  0xff,
+  0x27,
+  0xf8,
+  0xff,
+  0x19,
+  0x6c,
+  0x1d,
+  0x7e,
+  0x24,
+  0x00,
+  0xc0,
+  0x00,
+  0xff,
+  0xbf,
+  0xcb,
+  0xf8,
+  0x0f,
+  0x70,
+  0xd6,
+  0xf0,
+  0xdd,
+  0x7f,
+  0x2d,
+  0xff,
+  0xbf,
+  0xd6,
+  0xff,
+  0xc3,
+  0x7f,
+  0xff,
+  0x01,
+  0xfc,
+  0xdf,
+  0x5a,
+  0xf4,
+  0x0f,
+  0xff,
+  0x3d,
+  0x00,
+  0xf0,
+  0x3f,
+  0xf0,
+  0xaf,
+  0xe5,
+  0xf8,
+  0xd5,
+  0xba,
+  0x72,
+  0xff,
+  0x6d,
+  0x3d,
+  0x80,
+  0xa1,
+  0x9f,
+  0xc8,
+  0xe7,
+  0xca,
+  0x07,
+  0xfc,
+  0x09,
+  0x87,
+  0x5f,
+  0x06,
+  0x5b,
+  0xf8,
+  0xff,
+  0x1e,
+  0x00,
+  0xf0,
+  0xbf,
+  0xad,
+  0x07,
+  0x3c,
+  0xf8,
+  0x13,
+  0x03,
+  0xc0,
+  0x7f,
+  0xe0,
+  0x1f,
+  0xff,
+  0xf0,
+  0xad,
+  0x45,
+  0x04,
+  0xe6,
+  0x03,
+  0xfe,
+  0xad,
+  0xc3,
+  0x2f,
+  0x83,
+  0x00,
+  0x0c,
+  0x80,
+  0x04,
+  0x01,
+  0x58,
+  0xe0,
+  0xc6,
+  0x01,
+  0x1e,
+  0xfc,
+  0x01,
+  0x1f,
+  0x40,
+  0xfc,
+  0xff,
+  0x42,
+  0x7e,
+  0x78,
+  0xe7,
+  0x7f,
+  0x82,
+  0x1d,
+  0x07,
+  0x01,
+  0xd7,
+  0xe1,
+  0x8f,
+  0x07,
+  0x00,
+  0xfe,
+  0xbf,
+  0xfc,
+  0xbb,
+  0x00,
+  0x00,
+  0x5c,
+  0xf7,
+  0x0f,
+  0xff,
+  0xf0,
+  0x9f,
+  0x32,
+  0x20,
+  0x03,
+  0xfc,
+  0x3c,
+  0xfc,
+  0xff,
+  0x7f,
+  0xca,
+  0xf9,
+  0x2f,
+  0x75,
+  0x7d,
+  0xf0,
+  0x5e,
+  0x03,
+  0x00,
+  0x3d,
+  0xbb,
+  0xff,
+  0x52,
+  0xff,
+  0x7f,
+  0xa9,
+  0x9f,
+  0x87,
+  0xff,
+  0xff,
+  0x77,
+  0x79,
+  0xfe,
+  0x01,
+  0x7e,
+  0x1e,
+  0xbf,
+  0xbb,
+  0x0f,
+  0xf0,
+  0xe8,
+  0x97,
+  0xf2,
+  0x79,
+  0xff,
+  0xef,
+  0x01,
+  0x80,
+}};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD32.asm b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD32.asm
new file mode 100644
index 0000000000..2ac72adfe0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD32.asm
@@ -0,0 +1,113 @@
+;/**
+; * @file
+; *
+; * AGESA Family 10h Revision D support routines.
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  CPU/F10
+; * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+; */
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+
+    .XLIST
+    .LIST
+
+    .586P
+
+;===============================================
+;===============================================
+;==
+;== M E M O R Y   P R E S E N T   S E G M E N T
+;==
+;===============================================
+;===============================================
+    .MODEL flat
+    .CODE
+
+;======================================================================
+; F10RevDProbeFilterCritical:  Performs critical sequence for probe
+;                              filter initialization.
+;
+;   In:
+;       PciAddress          Full PCI address of the node to init
+;       LocalPciRegister    Current value of F3x1D4
+;
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       None
+;
+;======================================================================
+F10RevDProbeFilterCritical PROC NEAR C PUBLIC USES EAX ECX EDX, PciAddress:DWORD, LocalPciRegister:DWORD
+
+  mov    ecx, 0C001001Fh
+  rdmsr
+  push   eax
+  push   ecx
+  push   edx
+  or     dh, 40h
+  wrmsr
+
+  mov    eax, 810003D4h
+
+  mov    ecx, LocalPciRegister
+  mov    edx, PciAddress
+  shr    edx, 4
+  and    dh, 0F8h
+  or     ah, dh
+
+  or     cl, 2
+  db     0Fh, 0AEh, 0F0h  ; MFENCE
+
+  mov    dx, 0CF8h        ; Set Reg Config Space
+  db     0Fh, 0AEh, 0F0h  ; MFENCE
+
+  out    dx, eax
+  db     0Fh, 0AEh, 0F0h  ; MFENCE
+
+  mov    dl, 0FCh         ; Set DX to Pci Config Data
+  mov    eax, ecx         ;Set config Reg data
+  db     0Fh, 0AEh, 0F0h  ; MFENCE
+
+  out    dx, eax          ; move data to return position
+  db     0Fh, 0AEh, 0F0h  ; MFENCE
+
+  pop    edx
+  pop    ecx
+  pop    eax
+  wrmsr
+  ret
+
+F10RevDProbeFilterCritical ENDP
+
+END
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD64.asm b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD64.asm
new file mode 100644
index 0000000000..4e531ea5ab
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevD64.asm
@@ -0,0 +1,127 @@
+;/**
+; * @file
+; *
+; * AGESA Family 10h Revision D support routines.
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  CPU/F10
+; * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+; */
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+
+    .XLIST
+    .LIST
+
+;===============================================
+;===============================================
+;==
+;== M E M O R Y   P R E S E N T   S E G M E N T
+;==
+;===============================================
+;===============================================
+    .CODE
+
+;======================================================================
+; F10RevDProbeFilterCritical:  Performs critical sequence for probe
+;                              filter initialization.
+;
+;   In:
+;       PciAddress           Full PCI address of the node to init
+;       LocalPciRegister     Current value of F3x1D4
+;
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       None
+;
+;======================================================================
+PUBLIC F10RevDProbeFilterCritical
+F10RevDProbeFilterCritical PROC
+
+  push   rax
+  push   rcx
+  push   rdx
+  push   rsi
+  push   rdi
+
+  mov    esi, ecx
+  mov    edi, edx
+
+  mov    ecx, 0C001001Fh
+  rdmsr
+  push   rax
+  push   rcx
+  push   rdx
+  or     dh, 40h
+  wrmsr
+
+  mov    eax, 810003D4h
+
+  mov    ecx, edi
+  mov    edx, esi
+
+  shr    edx, 4
+  and    dh, 0F8h
+  or     ah, dh
+
+  or     cl, 2
+  mfence
+
+  mov    dx, 0CF8h        ; Set Reg Config Space
+  mfence
+
+  out    dx, eax
+  mfence
+
+  mov    dl, 0FCh         ; Set DX to Pci Config Data
+  mov    eax, ecx         ;Set config Reg data
+  mfence
+
+  out    dx, eax          ; move data to return position
+  mfence
+
+  pop    rdx
+  pop    rcx
+  pop    rax
+  wrmsr
+
+  pop    rdi
+  pop    rsi
+  pop    rdx
+  pop    rcx
+  pop    rax
+  ret
+
+F10RevDProbeFilterCritical ENDP
+
+END
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevDL3Features.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevDL3Features.c
new file mode 100644
index 0000000000..d16b4e749c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevDL3Features.c
@@ -0,0 +1,516 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 RevD L3 dependent feature support functions.
+ *
+ * Provides the functions necessary to initialize L3 dependent feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 60552 $   @e \$Date: 2011-10-17 18:50:55 -0600 (Mon, 17 Oct 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "CommonReturns.h"
+#include "cpuRegisters.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuLateInit.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuL3Features.h"
+#include "F10PackageType.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVD_F10REVDL3FEATURES_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * The family 10h background scrubber context structure.
+ *
+ * These fields need to be saved, modified, then restored
+ * per die as part of HT Assist initialization.
+ */
+typedef struct {
+  UINT32  DramScrub:5;               ///< DRAM scrub rate
+  UINT32  :3;                        ///< Reserved
+  UINT32  L3Scrub:5;                 ///< L3 scrub rate
+  UINT32  :3;                        ///< Reserved
+  UINT32  Redirect:1;                ///< DRAM scrubber redirect enable
+  UINT32  :15;                       ///< Reserved
+} F10_SCRUB_CONTEXT;
+
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+F10IsNonOptimalConfig (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Check to see if the input CPU supports L3 dependent features.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ * @param[in]    PlatformConfig      Contains the runtime modifiable feature input data.
+ *
+ * @retval       TRUE                L3 dependent features are supported.
+ * @retval       FALSE               L3 dependent features are not supported.
+ *
+ */
+BOOLEAN
+STATIC
+F10IsL3FeatureSupported (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig
+  )
+{
+  UINT32       Module;
+  UINT32       LocalPciRegister;
+  BOOLEAN      IsSupported;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredStatus;
+
+  IsSupported = FALSE;
+
+  if (PlatformConfig->PlatformProfile.UseHtAssist) {
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = NB_CAPS_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      if (((NB_CAPS_REGISTER *) &LocalPciRegister)->L3Capable == 1) {
+        IsSupported = TRUE;
+      }
+      break;
+    }
+  }
+  }
+  return IsSupported;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Check to see if the input CPU supports HT Assist.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    PlatformConfig      Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @retval       TRUE                HT Assist is supported.
+ * @retval       FALSE               HT Assist cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+F10IsHtAssistSupported (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN          IsSupported;
+  UINT32           CpuCount;
+  AP_MAILBOXES     ApMailboxes;
+
+  IsSupported = FALSE;
+
+  if (PlatformConfig->PlatformProfile.UseHtAssist) {
+    CpuCount = GetNumberOfProcessors (StdHeader);
+    ASSERT (CpuCount != 0);
+
+    if (CpuCount == 1) {
+      GetApMailbox (&ApMailboxes.ApMailInfo.Info, StdHeader);
+      if (ApMailboxes.ApMailInfo.Fields.ModuleType != 0) {
+        IsSupported = TRUE;
+      }
+    } else if (CpuCount > 1) {
+      IsSupported = TRUE;
+    }
+  }
+  return IsSupported;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable the Probe filter feature.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F10HtAssistInit (
+  IN       L3_FEATURE_FAMILY_SERVICES  *L3FeatureServices,
+  IN       UINT32  Socket,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                     Module;
+  UINT32                     LocalPciRegister;
+  PCI_ADDR                   PciAddress;
+  AGESA_STATUS               IgnoredStatus;
+
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = L3_CACHE_PARAM_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((L3_CACHE_PARAM_REGISTER *) &LocalPciRegister)->L3TagInit = 1;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      do {
+        LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      } while (((L3_CACHE_PARAM_REGISTER *) &LocalPciRegister)->L3TagInit != 0);
+
+      PciAddress.Address.Register = PROBE_FILTER_CTRL_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((PROBE_FILTER_CTRL_REGISTER *) &LocalPciRegister)->PFMode = 0;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+      F10RevDProbeFilterCritical (PciAddress, LocalPciRegister);
+
+      do {
+        LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      } while (((PROBE_FILTER_CTRL_REGISTER *) &LocalPciRegister)->PFInitDone != 1);
+      IDS_OPTION_HOOK (IDS_HT_ASSIST, &PciAddress, StdHeader);
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Save the current settings of the scrubbers, and disabled them.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    ScrubSettings       Location to store current L3 scrubber settings.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F10GetL3ScrubCtrl (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       UINT32 ScrubSettings[L3_SCRUBBER_CONTEXT_ARRAY_SIZE],
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32       Module;
+  UINT32       ScrubCtrl;
+  UINT32       ScrubAddr;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredStatus;
+
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+
+      ASSERT (Module < L3_SCRUBBER_CONTEXT_ARRAY_SIZE);
+
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = DRAM_SCRUB_ADDR_LOW_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &ScrubAddr, StdHeader);
+
+      PciAddress.Address.Register = SCRUB_RATE_CTRL_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &ScrubCtrl, StdHeader);
+
+      ((F10_SCRUB_CONTEXT *) &ScrubSettings[Module])->DramScrub =
+        ((SCRUB_RATE_CTRL_REGISTER *) &ScrubCtrl)->DramScrub;
+      ((F10_SCRUB_CONTEXT *) &ScrubSettings[Module])->L3Scrub =
+        ((SCRUB_RATE_CTRL_REGISTER *) &ScrubCtrl)->L3Scrub;
+      ((F10_SCRUB_CONTEXT *) &ScrubSettings[Module])->Redirect =
+        ((DRAM_SCRUB_ADDR_LOW_REGISTER *) &ScrubAddr)->ScrubReDirEn;
+
+      ((SCRUB_RATE_CTRL_REGISTER *) &ScrubCtrl)->DramScrub = 0;
+      ((SCRUB_RATE_CTRL_REGISTER *) &ScrubCtrl)->L3Scrub = 0;
+      ((DRAM_SCRUB_ADDR_LOW_REGISTER *) &ScrubAddr)->ScrubReDirEn = 0;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &ScrubCtrl, StdHeader);
+      PciAddress.Address.Register = DRAM_SCRUB_ADDR_LOW_REG;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &ScrubAddr, StdHeader);
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Restore the initial settings for the scrubbers.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    ScrubSettings       Location to store current L3 scrubber settings.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F10SetL3ScrubCtrl (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       UINT32 ScrubSettings[L3_SCRUBBER_CONTEXT_ARRAY_SIZE],
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32       Module;
+  UINT32       LocalPciRegister;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredStatus;
+
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+
+      ASSERT (Module < L3_SCRUBBER_CONTEXT_ARRAY_SIZE);
+
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = SCRUB_RATE_CTRL_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((SCRUB_RATE_CTRL_REGISTER *) &LocalPciRegister)->DramScrub =
+        ((F10_SCRUB_CONTEXT *) &ScrubSettings[Module])->DramScrub;
+      ((SCRUB_RATE_CTRL_REGISTER *) &LocalPciRegister)->L3Scrub =
+        ((F10_SCRUB_CONTEXT *) &ScrubSettings[Module])->L3Scrub;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+      PciAddress.Address.Register = DRAM_SCRUB_ADDR_LOW_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((DRAM_SCRUB_ADDR_LOW_REGISTER *) &LocalPciRegister)->ScrubReDirEn =
+        ((F10_SCRUB_CONTEXT *) &ScrubSettings[Module])->Redirect;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Set MSR bits required for L3 dependent features on each core.
+ *
+ * @param[in]    L3FeatureServices   L3 feature family services.
+ * @param[in]    HtAssistEnabled     Indicates whether Ht Assist is enabled.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F10HookDisableCache (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       BOOLEAN HtAssistEnabled,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64  LocalMsrRegister;
+
+  LibAmdMsrRead (MSR_BU_CFG2, &LocalMsrRegister, StdHeader);
+  LocalMsrRegister |= BIT42;
+  LibAmdMsrWrite (MSR_BU_CFG2, &LocalMsrRegister, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Hook before L3 features initialization sequence.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F10HookBeforeInit (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32          Module;
+  UINT32          LocalPciRegister;
+  UINT32          PfCtrlRegister;
+  PCI_ADDR        PciAddress;
+  CPU_LOGICAL_ID  LogicalId;
+  AGESA_STATUS    IgnoredStatus;
+  UINT32          PackageType;
+
+  GetLogicalIdOfSocket (Socket, &LogicalId, StdHeader);
+  PackageType = LibAmdGetPackageType (StdHeader);
+
+  LocalPciRegister = 0;
+  ((PROBE_FILTER_CTRL_REGISTER *) &LocalPciRegister)->PFWayNum = 2;
+  ((PROBE_FILTER_CTRL_REGISTER *) &LocalPciRegister)->PFSubCacheEn = 15;
+  ((PROBE_FILTER_CTRL_REGISTER *) &LocalPciRegister)->PFLoIndexHashEn = 1;
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = PROBE_FILTER_CTRL_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &PfCtrlRegister, StdHeader);
+      ((PROBE_FILTER_CTRL_REGISTER *) &LocalPciRegister)->PFPreferredSORepl =
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFPreferredSORepl;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+      // Assumption: all socket use the same CPU package.
+      if (((LogicalId.Revision & AMD_F10_D0) != 0) && (PackageType == PACKAGE_TYPE_C32)) {
+        // Apply erratum #384
+        // Set F2x11C[13:12] = 11b
+        PciAddress.Address.Function = FUNC_2;
+        PciAddress.Address.Register = 0x11C;
+        LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+        LocalPciRegister |= 0x3000;
+        LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      }
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Check to see if the input CPU is running in the optimal configuration.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @retval       TRUE               HT Assist is running sub-optimally.
+ * @retval       FALSE              HT Assist is running optimally.
+ *
+ */
+BOOLEAN
+F10IsNonOptimalConfig (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN      IsNonOptimal;
+  BOOLEAN      IsMemoryPresent;
+  UINT32       Module;
+  UINT32       LocalPciRegister;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredStatus;
+
+  IsNonOptimal = FALSE;
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+      IsMemoryPresent = FALSE;
+      PciAddress.Address.Function = FUNC_2;
+      PciAddress.Address.Register = DRAM_CFG_HI_REG0;
+
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      if (((DRAM_CFG_HI_REGISTER *) &LocalPciRegister)->MemClkFreqVal == 1) {
+        IsMemoryPresent = TRUE;
+        if (((DRAM_CFG_HI_REGISTER *) &LocalPciRegister)->MemClkFreq < 4) {
+          IsNonOptimal = TRUE;
+          break;
+        }
+      }
+
+      PciAddress.Address.Register = DRAM_CFG_HI_REG1;
+
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      if (((DRAM_CFG_HI_REGISTER *) &LocalPciRegister)->MemClkFreqVal == 1) {
+        IsMemoryPresent = TRUE;
+        if (((DRAM_CFG_HI_REGISTER *) &LocalPciRegister)->MemClkFreq < 4) {
+          IsNonOptimal = TRUE;
+          break;
+        }
+      }
+      if (!IsMemoryPresent) {
+        IsNonOptimal = TRUE;
+        break;
+      }
+    }
+  }
+  return IsNonOptimal;
+}
+
+
+CONST L3_FEATURE_FAMILY_SERVICES ROMDATA F10L3Features =
+{
+  0,
+  F10IsL3FeatureSupported,
+  F10GetL3ScrubCtrl,
+  F10SetL3ScrubCtrl,
+  F10HookBeforeInit,
+  (PF_L3_FEATURE_AFTER_INIT) CommonVoid,
+  F10HookDisableCache,
+  (PF_L3_FEATURE_ENABLE_CACHE) CommonVoid,
+  F10IsHtAssistSupported,
+  F10HtAssistInit,
+  F10IsNonOptimalConfig,
+  (PF_ATM_MODE_IS_SUPPORTED) CommonReturnFalse,
+  (PF_ATM_MODE_INIT) CommonVoid
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevDMsgBasedC1e.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevDMsgBasedC1e.c
new file mode 100644
index 0000000000..1467537142
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevDMsgBasedC1e.c
@@ -0,0 +1,282 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 RevD Message-Based C1e feature support functions.
+ *
+ * Provides the functions necessary to initialize the message-based C1e feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuMsgBasedC1e.h"
+#include "cpuApicUtilities.h"
+#include "cpuF10PowerMgmt.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVD_F10REVDMSGBASEDC1E_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F10InitializeMsgBasedC1eOnCore (
+  IN       VOID              *BmStsAddress,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+STATIC
+IsDramScrubberEnabled (
+  IN       PCI_ADDR PciAddress,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should message-based C1e be enabled
+ *
+ * @param[in]    MsgBasedC1eServices Pointer to this CPU's HW C1e family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @retval       TRUE               HW C1e is supported.
+ *
+ */
+BOOLEAN
+STATIC
+F10IsMsgBasedC1eSupported (
+  IN       MSG_BASED_C1E_FAMILY_SERVICES *MsgBasedC1eServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPU_LOGICAL_ID LogicalId;
+
+  GetLogicalIdOfSocket (Socket, &LogicalId, StdHeader);
+  return ((BOOLEAN) (((LogicalId.Revision) & AMD_F10_GT_D0) != 0));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Core 0 task to enable message-based C1e on a family 10h CPU.
+ *
+ * @param[in]    MsgBasedC1eServices Pointer to this CPU's HW C1e family services.
+ * @param[in]    EntryPoint          Timepoint designator.
+ * @param[in]    PlatformConfig      Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @return       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F10InitializeMsgBasedC1e (
+  IN       MSG_BASED_C1E_FAMILY_SERVICES *MsgBasedC1eServices,
+  IN       UINT64 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32       AndMask;
+  UINT32       Core;
+  UINT32       Module;
+  UINT32       OrMask;
+  UINT32       LocalPciRegister;
+  UINT32       Socket;
+  AP_TASK      TaskPtr;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredSts;
+
+  if ((EntryPoint & (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC)) != 0) {
+    // Note that this core 0 does NOT have the ability to launch
+    // any of its cores.  Attempting to do so could lead to a system
+    // hang.
+
+    // Set F3xA0[IdleExitEn] = 1
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = PW_CTL_MISC_REG;
+    AndMask = 0xFFFFFFFF;
+    OrMask = 0;
+    ((POWER_CTRL_MISC_REGISTER *) &OrMask)->IdleExitEn = 1;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F3xA0
+
+    // Erratum #610, BIOS should set F3x1B8[5]
+    PciAddress.Address.Register = 0x1B8;
+    OrMask = 0x00000020;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F3x1B8
+
+    // Set F3x188[EnStpGntOnFlushMaskWakeup] = 1
+    PciAddress.Address.Register = NB_EXT_CFG_LO_REG;
+    OrMask = 0;
+    ((NB_EXT_CFG_LO_REGISTER *) &OrMask)->EnStpGntOnFlushMaskWakeup = 1;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F3x188
+
+    // Set F3xD4[MTC1eEn] = 1, F3xD4[CacheFlushImmOnAllHalt] = 1
+    // Set F3xD4[StutterScrubEn] = 1 if scrubbing is enabled
+    ((CLK_PWR_TIMING_CTRL_REGISTER *) &AndMask)->StutterScrubEn = 0;
+    OrMask = 0;
+    ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->MTC1eEn = 1;
+    ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->CacheFlushImmOnAllHalt = 1;
+
+    IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+
+    for (Module = 0; Module < (UINT8)GetPlatformNumberOfModules (); Module++) {
+      if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts)) {
+        PciAddress.Address.Function = FUNC_3;
+        PciAddress.Address.Register = CPTC0_REG;
+        if (IsDramScrubberEnabled (PciAddress, StdHeader)) {
+          ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->StutterScrubEn = 1;
+        } else {
+          ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->StutterScrubEn = 0;
+        }
+        LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+        LocalPciRegister &= AndMask;
+        LocalPciRegister |= OrMask;
+        LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      }
+    }
+
+  } else if (EntryPoint == CPU_FEAT_AFTER_PM_INIT) {
+    // At early, this core 0 can launch its subordinate cores.
+    TaskPtr.FuncAddress.PfApTaskI = F10InitializeMsgBasedC1eOnCore;
+    TaskPtr.DataTransfer.DataSizeInDwords = 1;
+    TaskPtr.DataTransfer.DataPtr = &PlatformConfig->C1ePlatformData;
+    TaskPtr.DataTransfer.DataTransferFlags = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, NULL);
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable message-based C1e on a family 10h core.
+ *
+ * @param[in]    BmStsAddress       System I/O address of the bus master status bit.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F10InitializeMsgBasedC1eOnCore (
+  IN       VOID              *BmStsAddress,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 LocalMsrRegister;
+
+  // Set MSRC001_0055[SmiOnCmpHalt] = 0, MSRC001_0055[C1eOnCmpHalt] = 0
+  LibAmdMsrRead (MSR_INTPEND, &LocalMsrRegister, StdHeader);
+  ((INTPEND_MSR *) &LocalMsrRegister)->SmiOnCmpHalt = 0;
+  ((INTPEND_MSR *) &LocalMsrRegister)->C1eOnCmpHalt = 0;
+  ((INTPEND_MSR *) &LocalMsrRegister)->BmStsClrOnHltEn = 1;
+  ((INTPEND_MSR *) &LocalMsrRegister)->IntrPndMsgDis = 0;
+  ((INTPEND_MSR *) &LocalMsrRegister)->IntrPndMsg = 0;
+  ((INTPEND_MSR *) &LocalMsrRegister)->IoMsgAddr = (UINT64) *((UINT32 *) BmStsAddress);
+  LibAmdMsrWrite (MSR_INTPEND, &LocalMsrRegister, StdHeader);
+
+  // Set MSRC001_0015[HltXSpCycEn] = 1
+  LibAmdMsrRead (MSR_HWCR, &LocalMsrRegister, StdHeader);
+  LocalMsrRegister |= BIT12;
+  LibAmdMsrWrite (MSR_HWCR, &LocalMsrRegister, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Check to see if the DRAM background scrubbers are enabled or not.
+ *
+ * @param[in]    PciAddress         Address of F10 socket/module to check.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               Memory scrubbers are enabled on the current node.
+ * @retval       FALSE              Memory scrubbers are disabled on the current node.
+ */
+BOOLEAN
+STATIC
+IsDramScrubberEnabled (
+  IN       PCI_ADDR PciAddress,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 LocalPciRegister;
+
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = 0x58;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  return ((BOOLEAN) ((LocalPciRegister & 0x1F) != 0));
+}
+
+
+CONST MSG_BASED_C1E_FAMILY_SERVICES ROMDATA F10MsgBasedC1e =
+{
+  0,
+  F10IsMsgBasedC1eSupported,
+  F10InitializeMsgBasedC1e
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevDUtilities.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevDUtilities.c
new file mode 100644
index 0000000000..2b1efc6cae
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/F10RevDUtilities.c
@@ -0,0 +1,455 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 revision Dx specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 10h rev D.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF10PowerMgmt.h"
+#include "GeneralServices.h"
+#include "cpuEarlyInit.h"
+#include "cpuRegisters.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVD_F10REVDUTILITIES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+BOOLEAN
+F10CommonRevDSetDownCoreRegister (
+  IN       CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices,
+  IN       UINT32 *Socket,
+  IN       UINT32 *Module,
+  IN       UINT32 *LeveledCores,
+  IN       CORE_LEVELING_TYPE CoreLevelMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+F10CommonRevDGetProcIddMax (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT8                  Pstate,
+     OUT   UINT32                 *ProcIddMax,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+BOOLEAN
+F10CommonRevDGetNbCofVidUpdate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       PCI_ADDR *PciAddress,
+     OUT   BOOLEAN *NbVidUpdateAll,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+F10CommonRevDGetNbPstateInfo (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+  IN       UINT32                 NbPstate,
+     OUT   UINT32                 *FreqNumeratorInMHz,
+     OUT   UINT32                 *FreqDivisor,
+     OUT   UINT32                 *VoltageInuV,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+AGESA_STATUS
+F10RevDGetMinMaxNbFrequency (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+     OUT   UINT32                 *MinFreqInMHz,
+     OUT   UINT32                 *MaxFreqInMHz,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+UINT8
+F10CommonRevDGetNumberOfPhysicalCores (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set down core register on a revision D processor.
+ *
+ * This function set F3x190 Downcore Control Register[5:0]
+ *
+ * @param[in]   FamilySpecificServices   The current Family Specific Services.
+ * @param[in]   Socket                   Socket ID.
+ * @param[in]   Module                   Module ID in socket.
+ * @param[in]   LeveledCores             Number of core.
+ * @param[in]   CoreLevelMode            Core level mode.
+ * @param[in]   StdHeader                Header for library and services.
+ *
+ * @retval      TRUE                     Down Core register is updated.
+ * @retval      FALSE                    Down Core register is not updated.
+ */
+BOOLEAN
+F10CommonRevDSetDownCoreRegister (
+  IN       CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices,
+  IN       UINT32 *Socket,
+  IN       UINT32 *Module,
+  IN       UINT32 *LeveledCores,
+  IN       CORE_LEVELING_TYPE CoreLevelMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32    TempVar32_a;
+  UINT32    CoreDisableBits;
+  PCI_ADDR  PciAddress;
+  BOOLEAN   IsUpdated;
+  AGESA_STATUS AgesaStatus;
+
+  IsUpdated = FALSE;
+
+  switch (*LeveledCores) {
+  case 1:
+    CoreDisableBits = DOWNCORE_MASK_SINGLE;
+    break;
+  case 2:
+    CoreDisableBits = DOWNCORE_MASK_DUAL;
+    break;
+  case 3:
+    CoreDisableBits = DOWNCORE_MASK_TRI;
+    break;
+  case 4:
+    CoreDisableBits = DOWNCORE_MASK_FOUR;
+    break;
+  case 5:
+    CoreDisableBits = DOWNCORE_MASK_FIVE;
+    break;
+  default:
+    CoreDisableBits = 0;
+    break;
+  }
+
+  if (CoreDisableBits != 0) {
+    if (GetPciAddress (StdHeader, (UINT8) *Socket, (UINT8) *Module, &PciAddress, &AgesaStatus)) {
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = NORTH_BRIDGE_CAPABILITIES_REG;
+
+      LibAmdPciRead (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+      TempVar32_a = ((TempVar32_a >> 12) & 0x3) | ((TempVar32_a >> 13) & 0x4);
+      if (TempVar32_a == 0) {
+        CoreDisableBits &= 0x1;
+      } else if (TempVar32_a == 1) {
+        CoreDisableBits &= 0x3;
+      } else if (TempVar32_a == 2) {
+        CoreDisableBits &= 0x7;
+      } else if (TempVar32_a == 3) {
+        CoreDisableBits &= 0x0F;
+      } else if (TempVar32_a == 4) {
+        CoreDisableBits &= 0x1F;
+      } else if (TempVar32_a == 5) {
+        CoreDisableBits &= 0x3F;
+      }
+      PciAddress.Address.Register = DOWNCORE_CTRL;
+      LibAmdPciRead (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+      if ((TempVar32_a | CoreDisableBits) != TempVar32_a) {
+        TempVar32_a |= CoreDisableBits;
+        LibAmdPciWrite (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+        IsUpdated = TRUE;
+      }
+    }
+  }
+
+  return IsUpdated;
+}
+
+
+CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F10RevDCoreLeveling =
+{
+  0,
+  F10CommonRevDSetDownCoreRegister
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Get CPU pstate current on a revision D processor.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_IDD_MAX}.
+ *
+ *    This function returns the ProcIddMax.
+ *
+ *  @param[in]     FamilySpecificServices    The current Family Specific Services.
+ *  @param[in]     Pstate                    The P-state to check.
+ *  @param[out]    ProcIddMax                P-state current in mA.
+ *  @param[in]     StdHeader                 Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                      P-state is enabled
+ *  @retval        FALSE                     P-state is disabled
+ */
+BOOLEAN
+F10CommonRevDGetProcIddMax (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT8                  Pstate,
+     OUT   UINT32                 *ProcIddMax,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       IddDiv;
+  UINT32       CmpCap;
+  UINT32       MultiNodeCpu;
+  UINT32       NbCaps;
+  UINT32       MsrAddress;
+  UINT64       PstateMsr;
+  BOOLEAN      IsPstateEnabled;
+  PCI_ADDR     PciAddress;
+
+  IsPstateEnabled = FALSE;
+
+  MsrAddress = (UINT32) (Pstate + PS_REG_BASE);
+  ASSERT (MsrAddress <= PS_MAX_REG);
+
+  LibAmdMsrRead (MsrAddress, &PstateMsr, StdHeader);
+  if (((PSTATE_MSR *) &PstateMsr)->PsEnable == 1) {
+    OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = NB_CAPS_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &NbCaps, StdHeader); // F3xE8
+
+    switch (((PSTATE_MSR *) &PstateMsr)->IddDiv) {
+    case 0:
+      IddDiv = 1000;
+      break;
+    case 1:
+      IddDiv = 100;
+      break;
+    case 2:
+      IddDiv = 10;
+      break;
+    default:  // IddDiv = 3 is reserved. Use 10
+      IddDiv = 10;
+      break;
+    }
+    MultiNodeCpu = (UINT32) (((NB_CAPS_REGISTER *) &NbCaps)->MultiNodeCpu + 1);
+    CmpCap = (UINT32) (((NB_CAPS_REGISTER *) &NbCaps)->CmpCapHi << 2);
+    CmpCap |= (UINT32) (((NB_CAPS_REGISTER *) &NbCaps)->CmpCapLo);
+    CmpCap++;
+    *ProcIddMax = (UINT32) ((PSTATE_MSR *) &PstateMsr)->IddValue * IddDiv * CmpCap * MultiNodeCpu;
+    IsPstateEnabled = TRUE;
+  }
+  return IsPstateEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns whether or not BIOS is responsible for configuring the NB COFVID.
+ *
+ *  @CpuServiceMethod{::F_CPU_IS_NBCOF_INIT_NEEDED}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]   PciAddress               The northbridge to query by pci base address.
+ *  @param[out]  NbVidUpdateAll           Do all NbVids need to be updated
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      TRUE                    Perform northbridge frequency and voltage config.
+ *  @retval      FALSE                   Do not configure them.
+ */
+BOOLEAN
+F10CommonRevDGetNbCofVidUpdate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       PCI_ADDR *PciAddress,
+     OUT   BOOLEAN *NbVidUpdateAll,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NbVidUpdateAll = FALSE;
+  return FALSE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Determines the NB clock on the desired node.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_NB_PSTATE_INFO}.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     PlatformConfig          Platform profile/build option config structure.
+ *  @param[in]     PciAddress              The segment, bus, and device numbers of the CPU in question.
+ *  @param[in]     NbPstate                The NB P-state number to check.
+ *  @param[out]    FreqNumeratorInMHz      The desired node's frequency numerator in megahertz.
+ *  @param[out]    FreqDivisor             The desired node's frequency divisor.
+ *  @param[out]    VoltageInuV             The desired node's voltage in microvolts.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                    NbPstate is valid
+ *  @retval        FALSE                   NbPstate is disabled or invalid
+ */
+BOOLEAN
+F10CommonRevDGetNbPstateInfo (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+  IN       UINT32                 NbPstate,
+     OUT   UINT32                 *FreqNumeratorInMHz,
+     OUT   UINT32                 *FreqDivisor,
+     OUT   UINT32                 *VoltageInuV,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32   LocalPciRegister;
+  UINT64   LocalMsrRegister;
+  BOOLEAN  PstateIsValid;
+
+  PstateIsValid = FALSE;
+  if (NbPstate == 0) {
+    PciAddress->Address.Function = FUNC_3;
+    PciAddress->Address.Register = CPTC0_REG;
+    LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+    *FreqNumeratorInMHz = ((((CLK_PWR_TIMING_CTRL_REGISTER *) &LocalPciRegister)->NbFid + 4) * 200);
+    *FreqDivisor = 1;
+    LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+    *VoltageInuV = (1550000 - (12500 * ((UINT32) ((COFVID_STS_MSR *) &LocalMsrRegister)->CurNbVid)));
+    PstateIsValid = TRUE;
+  }
+  return PstateIsValid;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the node's minimum and maximum northbridge frequency.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_MIN_MAX_NB_FREQ}.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     PlatformConfig          Platform profile/build option config structure.
+ *  @param[in]     PciAddress              The segment, bus, and device numbers of the CPU in question.
+ *  @param[out]    MinFreqInMHz            The node's minimum northbridge frequency.
+ *  @param[out]    MaxFreqInMHz            The node's maximum northbridge frequency.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        AGESA_STATUS            Northbridge frequency is valid
+ */
+AGESA_STATUS
+F10RevDGetMinMaxNbFrequency (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+     OUT   UINT32                 *MinFreqInMHz,
+     OUT   UINT32                 *MaxFreqInMHz,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       LocalPciRegister;
+
+  PciAddress->Address.Function = FUNC_3;
+  PciAddress->Address.Register = CPTC0_REG;
+  LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+  *MinFreqInMHz = ((((CLK_PWR_TIMING_CTRL_REGISTER *) &LocalPciRegister)->NbFid + 4) * 200);
+  *MaxFreqInMHz = *MinFreqInMHz;
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the number of physical cores of current processor.
+ *
+ * @CpuServiceMethod{::F_CPU_NUMBER_OF_PHYSICAL_CORES}.
+ *
+ * @param[in]      FamilySpecificServices         The current Family Specific Services.
+ * @param[in]      StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ * @return         The number of physical cores.
+ */
+UINT8
+F10CommonRevDGetNumberOfPhysicalCores (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       CmpCap;
+  UINT32       CmpCapOnNode;
+  UINT32       Socket;
+  UINT32       Module;
+  UINT32       Core;
+  UINT32       LocalPciRegister;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredSts;
+
+  CmpCap = 0;
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts)) {
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = NB_CAPS_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      CmpCapOnNode = (UINT8) (((NB_CAPS_REGISTER *) &LocalPciRegister)->CmpCapHi << 2);
+      CmpCapOnNode |= (UINT8) (((NB_CAPS_REGISTER *) &LocalPciRegister)->CmpCapLo);
+      CmpCapOnNode++;
+      CmpCap += CmpCapOnNode;
+    }
+  }
+  return ((UINT8) CmpCap);
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyEquivalenceTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyEquivalenceTable.c
new file mode 100644
index 0000000000..1b4a1b82ed
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyEquivalenceTable.c
@@ -0,0 +1,114 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Hydra Equivalence Table related data
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVD_HY_F10HYEQUIVALENCETABLE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GetF10HyMicrocodeEquivalenceTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **HyEquivalenceTablePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST UINT16 ROMDATA CpuF10HyMicrocodeEquivalenceTable[] =
+{
+  0x1080, 0x1080,
+  0x1081, 0x1081,
+  0x1091, 0x1081
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the appropriate microcode patch equivalent ID table.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  HyEquivalenceTablePtr    Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10HyMicrocodeEquivalenceTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **HyEquivalenceTablePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = ((sizeof (CpuF10HyMicrocodeEquivalenceTable) / sizeof (UINT16)) / 2);
+  *HyEquivalenceTablePtr = CpuF10HyMicrocodeEquivalenceTable;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyHtPhyTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyHtPhyTables.c
new file mode 100644
index 0000000000..02f65c95cc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyHtPhyTables.c
@@ -0,0 +1,1294 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Hydra Ht Phy tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVD_HY_F10HYHTPHYTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  HT   Phy   T a b l e s
+// -------------------------
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10HyHtPhyRegisters[] =
+{
+// 0x60:0x68
+  {
+    HtPhyRangeRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_C0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_ALL,               //
+      0x60, 0x68,                           // Address
+      0x00000040,                           // regData
+      0x00000040,                           // regMask
+    }}
+  },
+// 0x70:0x78
+  {
+    HtPhyRangeRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_C0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_ALL,               //
+      0x70, 0x78,                           // Address
+      0x00000040,                           // regData
+      0x00000040,                           // regMask
+    }}
+  },
+// 0xC0
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_ALL,               //
+      0xC0,                                 // Address
+      0x40040000,                           // regData
+      0xe01F0000,                           // regMask
+    }}
+  },
+// 0xD0
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_ALL,               //
+      0xD0,                                 // Address
+      0x40040000,                           // regData
+      0xe01F0000,                           // regMask
+    }}
+  },
+// 0xCF
+// Default for HT3, unless overridden below.
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xCF,                                 // Address
+      0x0000002A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// Default for HT3, unless overridden below.
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xDF,                                 // Address
+      0x0000002A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+
+//
+// All the entries for XmtRdPtr 6
+//
+
+// 0xCF
+// For HT frequencies 1200-1600 and NB Freq 1600, 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1200M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000006A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 1200-1600 and NB Freq 1600, 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1200M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000006A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 1800 and NB Freq 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000006A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 1800 and NB Freq 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000006A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 3200 and NB Freq 1600
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_3200M, HT_FREQUENCY_3200M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000006A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 3200 and NB Freq 1600
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_3200M, HT_FREQUENCY_3200M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000006A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 1200 and 1600 and NB Freq 1600 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1200M, HT_FREQUENCY_1200M) | FREQ_RANGE_1 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK1),
+      0xCF,                                 // Address
+      0x0000006A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 1200 and 1600 and NB Freq 1600 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1200M, HT_FREQUENCY_1200M) | FREQ_RANGE_1 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK5),
+      0xDF,                                 // Address
+      0x0000006A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 1200 and 1800 and NB Freq 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1200M, HT_FREQUENCY_1200M) | FREQ_RANGE_1 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK1),
+      0xCF,                                 // Address
+      0x0000006A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 1200 and 1800 and NB Freq 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1200M, HT_FREQUENCY_1200M) | FREQ_RANGE_1 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK5),
+      0xDF,                                 // Address
+      0x0000006A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+
+//
+// Entries for XmtRdPtr 5
+//
+
+// 0xCF
+// For HT frequencies 1800-2600 and NB Freq 1600
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_2600M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000005A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 1800-2600 and NB Freq 1600
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_2600M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000005A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 2000 - 2800 and NB Freq 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2000M, HT_FREQUENCY_2800M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000005A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 2000 - 2800 and NB Freq 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2000M, HT_FREQUENCY_2800M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000005A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 1400 and 1800 and NB Freq 1600 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1400M, HT_FREQUENCY_1400M) | FREQ_RANGE_1 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK1),
+      0xCF,                                 // Address
+      0x0000005A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 1400 and 1800 and NB Freq 1600 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1400M, HT_FREQUENCY_1400M) | FREQ_RANGE_1 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK5),
+      0xDF,                                 // Address
+      0x0000005A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 1400 and 1600 and NB Freq 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1400M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK1),
+      0xCF,                                 // Address
+      0x0000005A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 1400 and 1600 and NB Freq 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1400M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK5),
+      0xDF,                                 // Address
+      0x0000005A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+
+//
+// Entries for XmtRdPtr 4
+//
+
+// 0xCF
+// For HT frequencies 2800-3000 and NB Freq 1600
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2800M, HT_FREQUENCY_3000M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000004A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 2800-3000 and NB Freq 1600
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2800M, HT_FREQUENCY_3000M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000004A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 3000 - 3200 and NB Freq 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_3000M, HT_FREQUENCY_3200M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000004A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 3000 - 3200 and NB Freq 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_3000M, HT_FREQUENCY_3200M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000004A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 2000 - 2400 and 3200 and NB Freq 1600 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2000M, HT_FREQUENCY_2400M) | FREQ_RANGE_1 (HT_FREQUENCY_3200M, HT_FREQUENCY_3200M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK1),
+      0xCF,                                 // Address
+      0x0000004A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 2000 - 2400 and 3200 and NB Freq 1600 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2000M, HT_FREQUENCY_2400M) | FREQ_RANGE_1 (HT_FREQUENCY_3200M, HT_FREQUENCY_3200M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK5),
+      0xDF,                                 // Address
+      0x0000004A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 2000 - 2400 and NB Freq 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2000M, HT_FREQUENCY_2400M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK1),
+      0xCF,                                 // Address
+      0x0000004A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 2000 - 2400 and NB Freq 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2000M, HT_FREQUENCY_2400M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK5),
+      0xDF,                                 // Address
+      0x0000004A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+
+//
+// Entries for XmtRdPtr 3
+//
+
+// 0xCF
+// For HT frequencies 2600-3000 and NB Freq 1600 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2600M, HT_FREQUENCY_3000M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK1),
+      0xCF,                                 // Address
+      0x0000003A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 2600-3000 and NB Freq 1600 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2600M, HT_FREQUENCY_3000M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK5),
+      0xDF,                                 // Address
+      0x0000003A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 2600 - 3200 and NB Freq 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2600M, HT_FREQUENCY_3200M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK1),
+      0xCF,                                 // Address
+      0x0000003A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 2600 - 3200 and NB Freq 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2600M, HT_FREQUENCY_3200M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK5),
+      0xDF,                                 // Address
+      0x0000003A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+
+//
+// Rev D0 fixups for Erratum 398.
+//
+
+// 0xCF
+// For HT frequencies 1800, 2200 and NB Freq 1400
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | FREQ_RANGE_1 (HT_FREQUENCY_2200M, HT_FREQUENCY_2200M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1400M, HT_FREQUENCY_1400M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK1 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000000A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 1800, 2200 and NB Freq 1400
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | FREQ_RANGE_1 (HT_FREQUENCY_2200M, HT_FREQUENCY_2200M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1400M, HT_FREQUENCY_1400M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK5 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000000A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 2600, 3000 and NB Freq 1400
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2600M, HT_FREQUENCY_2600M) | FREQ_RANGE_1 (HT_FREQUENCY_3000M, HT_FREQUENCY_3000M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1400M, HT_FREQUENCY_1400M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK1 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000000A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 2600, 3000 and NB Freq 1400
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2600M, HT_FREQUENCY_2600M) | FREQ_RANGE_1 (HT_FREQUENCY_3000M, HT_FREQUENCY_3000M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1400M, HT_FREQUENCY_1400M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK5 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000000A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 2200, 2600 and NB Freq 1600
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2200M, HT_FREQUENCY_2200M) | FREQ_RANGE_1 (HT_FREQUENCY_2600M, HT_FREQUENCY_2600M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000003A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 2200, 2600 and NB Freq 1600
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2200M, HT_FREQUENCY_2200M) | FREQ_RANGE_1 (HT_FREQUENCY_2600M, HT_FREQUENCY_2600M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000003A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 3000 and NB Freq 1600
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_3000M, HT_FREQUENCY_3000M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000002A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 3000 and NB Freq 1600
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_3000M, HT_FREQUENCY_3000M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000002A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 2200, 2600 and NB Freq 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2200M, HT_FREQUENCY_2200M) | FREQ_RANGE_1 (HT_FREQUENCY_2600M, HT_FREQUENCY_2600M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000003A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 2200, 2600 and NB Freq 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2200M, HT_FREQUENCY_2200M) | FREQ_RANGE_1 (HT_FREQUENCY_2600M, HT_FREQUENCY_2600M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000003A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 3000 and NB Freq 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_3000M, HT_FREQUENCY_3000M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000002A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 3000 and NB Freq 1800
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_3000M, HT_FREQUENCY_3000M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000002A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 1800 and NB Freq 1600 for all links
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK0 | HTPHY_LINKTYPE_SL0_LINK1 | HTPHY_LINKTYPE_SL0_LINK2 | HTPHY_LINKTYPE_SL0_LINK3),
+      0xCF,                                 // Address
+      0x0000003A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 1800 and NB Freq 1600 for all links
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_1800M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1600M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK4 | HTPHY_LINKTYPE_SL1_LINK5 | HTPHY_LINKTYPE_SL1_LINK6 | HTPHY_LINKTYPE_SL1_LINK7),
+      0xDF,                                 // Address
+      0x0000003A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 2200 and NB Freq 1600, 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2200M, HT_FREQUENCY_2200M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK1),
+      0xCF,                                 // Address
+      0x0000002A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 2200 and NB Freq 1600, 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2200M, HT_FREQUENCY_2200M) | COUNT_RANGE_NONE),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK5),
+      0xDF,                                 // Address
+      0x0000002A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// For HT frequencies 2600, 3000 and NB Freq 1600, 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2600M, HT_FREQUENCY_2600M) | FREQ_RANGE_1 (HT_FREQUENCY_3000M, HT_FREQUENCY_3000M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL0_LINK1),
+      0xCF,                                 // Address
+      0x0000001A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// For HT frequencies 2600, 3000 and NB Freq 1600, 1800 only for link 1
+  {
+    HtPhyFreqRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      (FREQ_RANGE_0 (HT_FREQUENCY_2600M, HT_FREQUENCY_2600M) | FREQ_RANGE_1 (HT_FREQUENCY_3000M, HT_FREQUENCY_3000M)),
+      (FREQ_RANGE_0 (HT_FREQUENCY_1600M, HT_FREQUENCY_1800M) | COUNT_RANGE_NONE),
+      (HTPHY_LINKTYPE_SL1_LINK5),
+      0xDF,                                 // Address
+      0x0000001A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+
+//
+// Deemphasis Settings for D1 processors.
+//
+
+// For D1, also set [7]TxLs23ClkGateEn.
+//deemphasis level        DL1[20:16], DL2[12:8], DP1[4:0] PostCur1En[31] PostCur2En[30] PreCur1En[29] MapPostCur2En[6]
+// No deemphasis            00h        00h          00h     0                0             0             0
+// -3dB postcursor          12h        00h          00h     1                0             0             0
+// -6dB postcursor          1Fh        00h          00h     1                0             0             0
+// -8dB postcursor          1Fh        06h          00h     1                1             0             1
+// -11dB postcursor         1Fh        0Dh          00h     1                1             0             1
+// -11dB postcursor with
+// -8dB precursor           1Fh        06h          07h     1                1             1             1
+
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x00000080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x00000080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x80120080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x80120080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x801F0080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x801F0080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xC01F06C0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xC01F06C0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xC01F0DC0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xC01F0DC0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xE01F06C7,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10_HY,                      // CpuFamily
+      AMD_F10_D1                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xE01F06C7,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+
+// 0x520A
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_ALL,                   //
+      0x520A,                               // Address
+      0x00004000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+// 0x530A
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_HY_ALL                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_ALL,                   //
+      0x530A,                               // Address
+      0x00004000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10HyHtPhyRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10HyHtPhyRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10HyHtPhyRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyInitEarlyTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyInitEarlyTable.c
new file mode 100644
index 0000000000..c5afa3ad26
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyInitEarlyTable.c
@@ -0,0 +1,144 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Implements the workaround for erratum 419.
+ *
+ * Returns the table of initialization steps to perform at
+ * AmdInitEarly.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10/RevD/HY
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "F10PackageType.h"
+#include "cpuEarlyInit.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVD_HY_F10HYINITEARLYTABLE_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GetF10HyEarlyInitOnCoreTable (
+  IN       CPU_SPECIFIC_SERVICES                *FamilyServices,
+     OUT   CONST S_PERFORM_EARLY_INIT_ON_CORE  **Table,
+  IN       AMD_CPU_EARLY_PARAMS                 *EarlyParams,
+  IN       AMD_CONFIG_PARAMS                    *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern F_PERFORM_EARLY_INIT_ON_CORE McaInitializationAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE SetRegistersFromTablesAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE SetBrandIdRegistersAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE LocalApicInitializationAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE LoadMicrocodePatchAtEarly;
+extern F_GET_EARLY_INIT_TABLE GetF10EarlyInitOnCoreTable;
+
+CONST S_PERFORM_EARLY_INIT_ON_CORE ROMDATA F10HyC32D0EarlyInitOnCoreTable[] =
+{
+  {McaInitializationAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {SetRegistersFromTablesAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {LocalApicInitializationAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {LoadMicrocodePatchAtEarly, PERFORM_EARLY_WARM_RESET},
+  {SetBrandIdRegistersAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {NULL, 0}
+};
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that may be invoked at AmdCpuEarly to return the steps
+ * appropriate for the executing Rev D core.
+ *
+ *  @CpuServiceMethod{::F_GET_EARLY_INIT_TABLE}.
+ *
+ * @param[in]       FamilyServices    The current Family Specific Services.
+ * @param[out]      Table             Table of appropriate init steps for the executing core.
+ * @param[in]       EarlyParams       Service Interface structure to initialize.
+ * @param[in]       StdHeader         Opaque handle to standard config header.
+ *
+ */
+VOID
+GetF10HyEarlyInitOnCoreTable (
+  IN       CPU_SPECIFIC_SERVICES                *FamilyServices,
+     OUT   CONST S_PERFORM_EARLY_INIT_ON_CORE  **Table,
+  IN       AMD_CPU_EARLY_PARAMS                 *EarlyParams,
+  IN       AMD_CONFIG_PARAMS                    *StdHeader
+  )
+{
+  UINT32         ProcessorPackageType;
+  CPU_LOGICAL_ID LogicalId;
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+  ProcessorPackageType = LibAmdGetPackageType (StdHeader);
+
+  // Check if this CPU is affected by erratum 419.
+  if (((LogicalId.Revision & AMD_F10_HY_SCM_D0) != 0) && ((ProcessorPackageType & (PACKAGE_TYPE_G34 | PACKAGE_TYPE_FR2_FR5_FR6)) == 0)) {
+    // Return initialization steps such that the microcode patch is applied before
+    // brand string determination is performed.
+    *Table = F10HyC32D0EarlyInitOnCoreTable;
+  } else {
+    // No workaround is necessary.  Return the standard table.
+    GetF10EarlyInitOnCoreTable (FamilyServices, Table, EarlyParams, StdHeader);
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyLogicalIdTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyLogicalIdTables.c
new file mode 100644
index 0000000000..79339a8f56
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyLogicalIdTables.c
@@ -0,0 +1,116 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Hydra Logical ID Table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVD_HY_F10HYLOGICALIDTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GetF10HyLogicalIdAndRev (
+     OUT   CONST CPU_LOGICAL_ID_XLAT **HyIdPtr,
+     OUT   UINT8 *NumberOfElements,
+     OUT   UINT64 *LogicalFamily,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+STATIC CONST CPU_LOGICAL_ID_XLAT ROMDATA CpuF10HyLogicalIdAndRevArray[] =
+{
+  {
+    0x1080,
+    AMD_F10_HY_SCM_D0
+  },
+  {
+    0x1090,
+    AMD_F10_HY_MCM_D0
+  },
+  {
+    0x1081,
+    AMD_F10_HY_SCM_D1
+  },
+  {
+    0x1091,
+    AMD_F10_HY_MCM_D1
+  }
+};
+
+VOID
+GetF10HyLogicalIdAndRev (
+     OUT   CONST CPU_LOGICAL_ID_XLAT **HyIdPtr,
+     OUT   UINT8 *NumberOfElements,
+     OUT   UINT64 *LogicalFamily,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = (sizeof (CpuF10HyLogicalIdAndRevArray) / sizeof (CPU_LOGICAL_ID_XLAT));
+  *HyIdPtr = CpuF10HyLogicalIdAndRevArray;
+  *LogicalFamily = AMD_FAMILY_10_HY;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyMicrocodePatchTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyMicrocodePatchTables.c
new file mode 100644
index 0000000000..a924bbd3e3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyMicrocodePatchTables.c
@@ -0,0 +1,114 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Hydra PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVD_HY_F10HYMICROCODEPATCHTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+extern CONST MICROCODE_PATCHES ROMDATA *CpuF10HyMicroCodePatchArray[];
+extern CONST UINT8 ROMDATA CpuF10HyNumberOfMicrocodePatches;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GetF10HyMicroCodePatchesStruct (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **HyUcodePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns a table containing the appropriate microcode patches.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  HyUcodePtr               Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10HyMicroCodePatchesStruct (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **HyUcodePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = CpuF10HyNumberOfMicrocodePatches;
+  *HyUcodePtr = &CpuF10HyMicroCodePatchArray[0];
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyMsrTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyMsrTables.c
new file mode 100644
index 0000000000..83094bdf7a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyMsrTables.c
@@ -0,0 +1,137 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 HY MSR tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVD_HY_F10HYMSRTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F10HyMsrRegisters[] =
+{
+//  M S R    T a b l e s
+// ----------------------
+
+// MSR_LS_CFG (0xC0011020)
+// bit[1] = 0
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_B0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_LS_CFG,                           // MSR Address
+      0x0000000000000000,                   // OR Mask
+      (1 << 1)                              // NAND Mask
+    }}
+  },
+
+// MSR_BU_CFG (0xC0011023)
+// bit[21] = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_B0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_BU_CFG,                           // MSR Address
+      (1 << 21),                            // OR Mask
+      (1 << 21),                            // NAND Mask
+    }}
+  },
+
+// MSR_BU_CFG2 (0xC001102A)
+// bit[50] = 1
+// For GH rev C1 and later [RdMmExtCfgQwEn]=1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_C0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_BU_CFG2,                          // MSR Address
+      0x0004000000000000,                   // OR Mask
+      0x0004000000000000,                   // NAND Mask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F10HyMsrRegisterTable = {
+  AllCores,
+  (sizeof (F10HyMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F10HyMsrRegisters,
+};
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyPciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyPciTables.c
new file mode 100644
index 0000000000..d1fa49d2b7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevD/HY/F10HyPciTables.c
@@ -0,0 +1,384 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Hydra PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVD_HY_F10HYPCITABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10HyPciRegisters[] =
+{
+// F0x68 -
+  // BufRelPri for rev D
+  // bits[14:13]  BufRelPri = 1
+  // bit [25] CHtExtAddrEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO(0, 0, 24, FUNC_0, 0x68),   // Address
+      0x02002000,                           // regData
+      0x02006000,                           // regMask
+    }}
+  },
+  // F0x[E4,A4,C4,84] Link Control Register
+  // bit [15] Addr64bitEn = 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                          // CpuRevision
+    },
+	{AMD_PF_ALL},
+    {{
+      HT_HOST_FEAT_NONCOHERENT,
+      0x4,
+      0x00008000,
+      0x00008000,
+    }}
+  },
+// F0x150 - Link Global Retry Control Register
+// bit[18:16] TotalRetryAttempts = 7
+// bit[13] HtRetryCrcDatInsDynEn = 1
+// bit[12]HtRetryCrcCmdPackDynEn = 1
+// bit[11:9] HtRetryCrcDatIns = 0
+// bit[8] HtRetryCrcCmdPack = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x150), // Address
+      0x00073100,                           // regData
+      0x00073F00,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[15:13] ForceFullT0 = 6
+// bit[5:0] T0Time = 0x26
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10_HY,                   // CpuFamily
+      AMD_F10_D1                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x0000C026,                           // regData
+      0x0000E03F,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[9] RXCalEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10_HY,                   // CpuFamily
+      AMD_F10_Dx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x00000200,                           // regData
+      0x00000200,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[7:6] InLnSt = 01b (PHY_OFF)
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_Dx                            // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x00000040,                           // regData
+      0x000000C0,                           // regMask
+    }}
+  },
+// F0x[18C:170] - Link Extended Control Register - All connected links.
+// bit[8] LS2En = 1
+  {
+    HtLinkPciRegister,
+    {
+      AMD_FAMILY_10_HY,                     // CpuFamily
+      AMD_F10_D1                            // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platform Features
+    {{
+      HT_HOST_FEATURES_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x170), // Address
+      0x00000100,                           // regData
+      0x00000100,                           // regMask
+    }}
+  },
+// F2x1B0 - Extended Memory Controller Configuration Low
+// bits[10:8], CohPrefPrbLmt = 0
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_Dx                            // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,              // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x1B0), // Address
+      0x00000000,                           // regData
+      0x00000700,                           // regMask
+    }}
+  },
+// Function 3 - Misc. Control
+// F3x158 - Link to XCS Token Count
+// bits[3:0] LnkToXcsDRToken = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_A2                       // CpuRevision
+    },
+    {AMD_PF_UMA},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x158), // Address
+      0x00000003,                           // regData
+      0x0000000F,                           // regMask
+    }}
+  },
+
+// F3x80 - ACPI Power State Control
+// ACPI State C2
+// bits[0] CpuPrbEn = 1
+// bits[1] NbLowPwrEn = 0
+// bits[2] NbGateEn = 0
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 1
+// ACPI State C3, C1E or Link init
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 1
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 5
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_Ax                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0x0000A681,                           // regData
+      0x0000FFFF,                           // regMask
+    }}
+  },
+
+// F3x80 - ACPI Power State Control
+// ACPI State C3, C1E or Link init
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 1
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 7
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_D0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0x0000E600,                           // regData
+      0x0000FF00,                           // regMask
+    }}
+  },
+
+// F3xA0 - Power Control Miscellaneous
+// bit[14] BpPinsTriEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_D0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0),  // Address
+      0x00004000,                           // regData
+      0x00004000,                           // regMask
+    }}
+  },
+
+// F3xD4 - Clock Power Timing Control 0
+// bits[15] StutterScrubEn = 0
+// bits[14] CacheFlushImmOnAllHalt = 0
+// bits[13] MTC1eEn = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xD4),  // Address
+      0x00000000,                           // regData
+      0x0000E000,                           // regMask
+    }}
+  },
+
+// F3x188 - NB Extended Configuration Low Register
+// bit[27] = DisCpuWrSzDw64ReOrd
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x188), // Address
+      0x08000000,                           // regData
+      0x08000000,                           // regMask
+    }}
+  },
+
+// F3x1B8 - L3 Control
+// bit[18] L3RdBufBypDis = 1, Erratum 374
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_D0                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1B8), // Address
+      0x00040000,                           // regData
+      0x00040000,                           // regMask
+    }}
+  },
+
+// F3x1B8 - L3 Control
+// bit[23] L3BankSwapDis = 1, Erratum 385
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1B8), // Address
+      0x00800000,                           // regData
+      0x00800000,                           // regMask
+    }}
+  },
+
+// F3x1D4 - Probe Filter Control Register
+// bits[21:20] PFPreferedSORepl = 2
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Dx                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1D4), // Address
+      0x00200000,                           // regData
+      0x00300000,                           // regMask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F10HyPciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10HyPciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10HyPciRegisters,
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10MicrocodePatch010000bf.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10MicrocodePatch010000bf.c
new file mode 100644
index 0000000000..9a9ea0811d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10MicrocodePatch010000bf.c
@@ -0,0 +1,1039 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Microcode patch.
+ *
+ * Fam10 Microcode Patch rev 010000bf for 10a0 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10/REVC
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+// Patch code 010000bf for 10a0 and equivalent
+CONST MICROCODE_PATCHES ROMDATA CpuF10MicrocodePatch010000bf =
+{{
+0x10,
+0x20,
+0x17,
+0x02,
+0xbf,
+0x00,
+0x00,
+0x01,
+0x00,
+0x80,
+0x20,
+0x00,
+0x42,
+0x82,
+0x02,
+0x39,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0xa0,
+0x10,
+0x00,
+0x00,
+0x00,
+0xaa,
+0xaa,
+0xaa,
+0x74,
+0x0f,
+0x00,
+0x00,
+0xbe,
+0x01,
+0x00,
+0x00,
+0x33,
+0x0e,
+0x00,
+0x00,
+0xa9,
+0x01,
+0x00,
+0x00,
+0x75,
+0x00,
+0x00,
+0x00,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xff,
+0xa0,
+0xfd,
+0xff,
+0x28,
+0xc3,
+0x3f,
+0xc0,
+0xcf,
+0xff,
+0x07,
+0xe2,
+0x01,
+0x0f,
+0xde,
+0x50,
+0xfe,
+0xf2,
+0xdf,
+0xff,
+0x0f,
+0x3b,
+0xfc,
+0x01,
+0xc5,
+0x40,
+0x03,
+0xd4,
+0x00,
+0x80,
+0xff,
+0xfe,
+0x7f,
+0xfe,
+0xe1,
+0x1b,
+0xc8,
+0x5b,
+0xf6,
+0xff,
+0xff,
+0x7b,
+0x87,
+0x5f,
+0xad,
+0x6b,
+0xf9,
+0x6f,
+0xfe,
+0xfa,
+0x1f,
+0xfe,
+0xb5,
+0x00,
+0x40,
+0x11,
+0x6a,
+0x0e,
+0xc0,
+0x9b,
+0x56,
+0xe8,
+0x75,
+0xe0,
+0x0f,
+0x38,
+0x00,
+0xcf,
+0xcc,
+0xa0,
+0xd7,
+0x83,
+0x3f,
+0xff,
+0x7b,
+0xfc,
+0xbf,
+0x00,
+0x3f,
+0x0f,
+0xff,
+0x35,
+0x00,
+0x80,
+0xd0,
+0x18,
+0x07,
+0x60,
+0x19,
+0x07,
+0xf4,
+0x7a,
+0xf0,
+0xa6,
+0x1c,
+0x00,
+0x38,
+0x1f,
+0xc0,
+0xe7,
+0xa0,
+0xff,
+0xff,
+0x51,
+0x9e,
+0x7f,
+0x80,
+0x9f,
+0x87,
+0x80,
+0x0a,
+0x00,
+0x60,
+0xd3,
+0xe0,
+0x4f,
+0x10,
+0xfc,
+0x32,
+0xd8,
+0x3a,
+0x49,
+0xff,
+0x7f,
+0xcb,
+0xf0,
+0x0f,
+0xf0,
+0xf3,
+0x8c,
+0xff,
+0xff,
+0x00,
+0xc3,
+0x31,
+0x17,
+0xfd,
+0x2c,
+0x47,
+0x0d,
+0x00,
+0xd0,
+0x32,
+0xf0,
+0x27,
+0x1d,
+0x7e,
+0x19,
+0x6c,
+0x60,
+0xf1,
+0xff,
+0x1f,
+0x7f,
+0x38,
+0xe6,
+0xa2,
+0x16,
+0x35,
+0xff,
+0xff,
+0xe7,
+0xe1,
+0x1f,
+0xe0,
+0x00,
+0xfe,
+0xbf,
+0x07,
+0xbb,
+0x9c,
+0xf4,
+0xff,
+0x3f,
+0x0f,
+0xff,
+0x00,
+0x07,
+0xf8,
+0xdf,
+0x8d,
+0x0b,
+0x3e,
+0x78,
+0x73,
+0x3f,
+0x8b,
+0xff,
+0xff,
+0x70,
+0xe5,
+0xf0,
+0x0b,
+0x03,
+0x00,
+0x0f,
+0x50,
+0xff,
+0x52,
+0xfe,
+0xbb,
+0xaf,
+0xfa,
+0x87,
+0x7f,
+0xff,
+0x07,
+0xc0,
+0xff,
+0xa5,
+0x14,
+0x1f,
+0xbe,
+0xff,
+0x9f,
+0xc5,
+0xff,
+0xc4,
+0xaa,
+0x72,
+0xf8,
+0xef,
+0x01,
+0x80,
+0xff,
+0xeb,
+0xff,
+0x00,
+0x43,
+0x37,
+0x96,
+0xfd,
+0xc3,
+0xf6,
+0xff,
+0xab,
+0x80,
+0xff,
+0x00,
+0x3f,
+0x0f,
+0xff,
+0xff,
+0x8f,
+0xe2,
+0xfc,
+0x02,
+0x54,
+0x39,
+0xda,
+0xd5,
+0x00,
+0x80,
+0xff,
+0x68,
+0x3c,
+0xe0,
+0xc1,
+0x9b,
+0xca,
+0xfe,
+0xe4,
+0xff,
+0xff,
+0x09,
+0x87,
+0x5f,
+0x06,
+0x5b,
+0xfe,
+0x0f,
+0xc4,
+0x03,
+0x1e,
+0xfa,
+0xa9,
+0x7c,
+0xe0,
+0xff,
+0x7b,
+0x00,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x00,
+0xf0,
+0xff,
+0x3d,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0x1e,
+0x00,
+0xf8,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x7f,
+0x0f,
+0x00,
+0xfc,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0xbf,
+0x07,
+0x00,
+0xfc,
+0x07,
+0xfe,
+0x01,
+0x0d,
+0xff,
+0x00,
+0xfe,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xfe,
+0x03,
+0xff,
+0xff,
+0x86,
+0x7f,
+0x00,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x01,
+0x80,
+0xff,
+0xef,
+0x7f,
+0xbf,
+0xff,
+0x81,
+0xdf,
+0x95,
+0xc1,
+0xaf,
+0xff,
+0x91,
+0xfc,
+0x2f,
+0x48,
+0x57,
+0x06,
+0xbf,
+0xff,
+0x4f,
+0xb0,
+0xff,
+0x32,
+0xd8,
+0x3a,
+0xfc,
+0xd7,
+0x00,
+0x40,
+0x95,
+0x81,
+0xff,
+0x94,
+0x01,
+0x1f,
+0xe0,
+0xe7,
+0xe1,
+0xff,
+0xff,
+0x53,
+0xce,
+0x7f,
+0xa9,
+0xeb,
+0x83,
+0xff,
+0xef,
+0x4b,
+0xfd,
+0xfc,
+0xbd,
+0xbd,
+0x0e,
+0xff,
+0x7b,
+0x00,
+0xe0,
+0x9c,
+0x56,
+0x0e,
+0x00,
+0xd0,
+0x0f,
+0xe0,
+0x73,
+0xff,
+0x81,
+0x7f,
+0x00,
+0xc3,
+0x3f,
+0x80,
+0x7f,
+0xfc,
+0x07,
+0xfe,
+0x01,
+0x0d,
+0xff,
+0x00,
+0xfe,
+0xe0,
+0xfd,
+0x35,
+0x00,
+0xe0,
+0x0d,
+0x2b,
+0x07,
+0x3a,
+0xf0,
+0x07,
+0xf4,
+0x96,
+0xff,
+0xed,
+0x3f,
+0xff,
+0xe1,
+0x1f,
+0xab,
+0x5b,
+0x02,
+0x00,
+0xfe,
+0xfb,
+0x87,
+0x7f,
+0xac,
+0x00,
+0xa8,
+0xcd,
+0x1a,
+0x6f,
+0x72,
+0xc0,
+0xff,
+0xfc,
+0x3c,
+0xfc,
+0x03,
+0x1f,
+0xc0,
+0x7f,
+0xe0,
+0xe0,
+0xdf,
+0xf0,
+0x0f,
+0x7f,
+0x00,
+0xff,
+0x81,
+0x80,
+0x7f,
+0xc3,
+0x3f,
+0x0f,
+0x00,
+0xfc,
+0x7f,
+0xff,
+0x7f,
+0x79,
+0xfc,
+0x01,
+0x7e,
+0x1e,
+0xfe,
+0x2b,
+0x07,
+0xe0,
+0xfe,
+0x07,
+0xf0,
+0x39,
+0xe8,
+0xc0,
+0x3f,
+0x80,
+0xff,
+0x1f,
+0xc0,
+0xbf,
+0xe1,
+0xb9,
+0x06,
+0x00,
+0x78,
+0xf6,
+0xff,
+0xbf,
+0x80,
+0xff,
+0x00,
+0x3f,
+0x0f,
+0xff,
+0xff,
+0x8f,
+0xe2,
+0xfc,
+0x03,
+0xfc,
+0x3c,
+0x7f,
+0x34,
+0x1e,
+0xf0,
+0xd0,
+0xef,
+0xe5,
+0xf3,
+0xff,
+0xdf,
+0x03,
+0x00,
+0xee,
+0xa3,
+0x72,
+0x00,
+0x83,
+0x7e,
+0x00,
+0x9f,
+0xf8,
+0xfd,
+0xff,
+0x07,
+0x1f,
+0xbe,
+0xb1,
+0xec,
+0x65,
+0x97,
+0xff,
+0x1f,
+0x79,
+0xf8,
+0x07,
+0xf8,
+0x80,
+0xc4,
+0x97,
+0x01,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x01,
+0xfc,
+0x07,
+0xfe,
+0xfe,
+0x0d,
+0xff,
+0x00,
+0x07,
+0xf0,
+0x1f,
+0xf8,
+0xf8,
+0x37,
+0xfc,
+0x03,
+0x00,
+0xc0,
+0xff,
+0xf7,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0xff,
+0x00,
+0xfe,
+0x03,
+0x00,
+0xff,
+0x86,
+0x7f,
+0xfc,
+0x03,
+0xf8,
+0x0f,
+0x01,
+0xfc,
+0x1b,
+0xfe,
+0x7b,
+0x00,
+0xe0,
+0xff,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0x81,
+0x7f,
+0x00,
+0xff,
+0x3f,
+0x80,
+0x7f,
+0xc3,
+0x07,
+0xfe,
+0x01,
+0xfc,
+0xff,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0x3d,
+0x00,
+0xf0,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xc0,
+0x3f,
+0x80,
+0xe1,
+0x1f,
+0xc0,
+0xbf,
+0xfe,
+0x03,
+0xff,
+0x00,
+0x86,
+0x7f,
+0x00,
+0xff,
+0xf8,
+0xff,
+0x1e,
+0x00,
+0xf0,
+0x1f,
+0xf8,
+0x07,
+0x37,
+0xfc,
+0x03,
+0xf8,
+0xc0,
+0x7f,
+0xe0,
+0x1f,
+0xdf,
+0xf0,
+0x0f,
+0xe0,
+0x00,
+0xff,
+0x81,
+0x7f,
+0x7f,
+0xc3,
+0x3f,
+0x80,
+0x00,
+0xfc,
+0x7f,
+0x0f,
+0x03,
+0xf8,
+0x0f,
+0xfc,
+0xfc,
+0x1b,
+0xfe,
+0x01,
+0x0f,
+0xe0,
+0x3f,
+0xf0,
+0xf0,
+0x6f,
+0xf8,
+0x07,
+0x3f,
+0x80,
+0xff,
+0xc0,
+0xc0,
+0xbf,
+0xe1,
+0x1f,
+0x07,
+0x00,
+0xfe,
+0xbf,
+0xfe,
+0x01,
+0xfc,
+0x07,
+0x00,
+0xfe,
+0x0d,
+0xff,
+0xf8,
+0x07,
+0xf0,
+0x1f,
+0x03,
+0xf8,
+0x37,
+0xfc,
+0xe0,
+0x1f,
+0xc0,
+0x7f,
+0x0f,
+0xe0,
+0xdf,
+0xf0,
+0xdf,
+0x03,
+0x00,
+0xff,
+0x03,
+0xff,
+0x00,
+0xfe,
+0x7f,
+0x00,
+0xff,
+0x86,
+0x0f,
+0xfc,
+0x03,
+0xf8,
+0xfe,
+0x01,
+0xfc,
+0x1b,
+0x3f,
+0xf0,
+0x0f,
+0xe0,
+0xf8,
+0x07,
+0xf0,
+0x6f,
+0xff,
+0xef,
+0x01,
+0x80
+}};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEHtPhyTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEHtPhyTables.c
new file mode 100644
index 0000000000..52630d9541
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEHtPhyTables.c
@@ -0,0 +1,373 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Rev E HT PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVE_F10REVEHTPHYTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  HT   Phy T a b l e s
+// -------------------------
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10RevEHtPhyRegisters[] =
+{
+// 0x60:0x68
+  {
+    HtPhyRangeRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_ALL,               //
+      0x60, 0x68,                           // Address range
+      0x00000040,                           // regData
+      0x00000040,                           // regMask
+    }}
+  },
+// 0x70:0x78
+  {
+    HtPhyRangeRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_ALL,               //
+      0x70, 0x78,                           // Address range
+      0x00000040,                           // regData
+      0x00000040,                           // regMask
+    }}
+  },
+// 0xC0
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_ALL,               //
+      0xC0,                                 // Address
+      0x40040000,                           // regData
+      0xe01F0000,                           // regMask
+    }}
+  },
+// 0xD0
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_ALL,               //
+      0xD0,                                 // Address
+      0x40040000,                           // regData
+      0xe01F0000,                           // regMask
+    }}
+  },
+// 0x520A
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                           // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_ALL,                   //
+      0x520A,                               // Address
+      0x00004000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+// 0x530A
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                           // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_ALL,                   //
+      0x530A,                               // Address
+      0x00004000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+
+
+//
+// Deemphasis Settings
+//
+
+// For C3, also set [7]TxLs23ClkGateEn.
+//deemphasis level        DL1[20:16], DL2[12:8], DP1[4:0] PostCur1En[31] PostCur2En[30] PreCur1En[29] MapPostCur2En[6]
+// No deemphasis            00h        00h          00h     0                0             0             0
+// -3dB postcursor          12h        00h          00h     1                0             0             0
+// -6dB postcursor          1Fh        00h          00h     1                0             0             0
+// -8dB postcursor          1Fh        06h          00h     1                1             0             1
+// -11dB postcursor         1Fh        0Dh          00h     1                1             0             1
+// -11dB postcursor with
+// -8dB precursor           1Fh        06h          07h     1                1             1             1
+
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x00000080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x00000080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x80120080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x80120080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x801F0080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x801F0080,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xC01F06C0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xC01F06C0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xC01F0DC0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xC01F0DC0,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xE01F06C7,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                               // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xE01F06C7,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10RevEHtPhyRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10RevEHtPhyRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10RevEHtPhyRegisters
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEMsrTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEMsrTables.c
new file mode 100644
index 0000000000..59cce83324
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEMsrTables.c
@@ -0,0 +1,134 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Rev E, MSR tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVE_F10REVEMSRTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F10RevEMsrRegisters[] =
+{
+//  M S R    T a b l e s
+// ----------------------
+// MSR_LS_CFG (0xC0011020)
+// bit[1] = 0
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_LS_CFG,                           // MSR Address
+      0x0000000000000000,                   // OR Mask
+      (1 << 1),                             // NAND Mask
+    }}
+  },
+
+// MSR_BU_CFG (0xC0011023)
+// bit[21] = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_BU_CFG,                           // MSR Address
+      (1 << 21),                            // OR Mask
+      (1 << 21),                            // NAND Mask
+    }}
+  },
+
+// MSR_BU_CFG2 (0xC001102A)
+// bit[50] = 1
+// For GH rev C1 and later [RdMmExtCfgQwEn]=1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_BU_CFG2,                          // MSR Address
+      0x0004000000000000,                   // OR Mask
+      0x0004000000000000,                   // NAND Mask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10RevEMsrRegisterTable = {
+  AllCores,
+  (sizeof (F10RevEMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F10RevEMsrRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEPciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEPciTables.c
new file mode 100644
index 0000000000..ab5e1fe22a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEPciTables.c
@@ -0,0 +1,225 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Rev E PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10/RevE
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVE_F10REVEPCITABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10RevEPciRegisters[] =
+{
+// F0x68 -
+// BufRelPri for rev E
+// bits[14:13]  BufRelPri = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO(0, 0, 24, FUNC_0, 0x68),   // Address
+      0x00002000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+
+// F0x16C - Link Global Extended Control Register
+// bit[7:6] InLnSt = 0x01
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x0000C026,                           // regData
+      0x0000E03F,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[15:13] ForceFullT0 = 6
+// bit[9] RXCalEn = 1
+// bit[5:0] T0Time = 0x26
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                      // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x0000C226,                           // regData
+      0x0000E23F,                           // regMask
+    }}
+  },
+// F3x80 - ACPI Power State Control
+// ACPI State C2
+// bits[0] CpuPrbEn = 1
+// bits[1] NbLowPwrEn = 0
+// bits[2] NbGateEn = 0
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 1
+// ACPI State C3, C1E or Link init
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 1
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 7
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0x0000E681,                           // regData
+      0x0000FFFF,                           // regMask
+    }}
+  },
+// F3xDC - Clock Power Timing Control 2
+// bits[14:12] NbsynPtrAdj = 6
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xDC),  // Address
+      0x00006000,                           // regData
+      0x00007000,                           // regMask
+    }}
+  },
+// F3x1C4 - L3 Power Control Register
+// bits[8] L3PwrSavEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x1C4), // Address
+      0x00000100,                           // regData
+      0x00000100,                           // regMask
+    }}
+  },
+// F3x188 - NB Extended Configuration Low Register
+// bit[4] = EnStpGntOnFlushMaskWakeup
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x188), // Address
+      0x00000010,                           // regData
+      0x00000010,                           // regMask
+    }}
+  },
+// F4x15C - Core Performance Boost Control
+// bits[1:0]   BoostSrc = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_Ex                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x15C), // Address
+      0x00000000,                           // regData
+      0x00000003,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10RevEPciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10RevEPciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10RevEPciRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEUtilities.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEUtilities.c
new file mode 100644
index 0000000000..476ae27b93
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/F10RevEUtilities.c
@@ -0,0 +1,396 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 revision Ex specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 10h rev E.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF10PowerMgmt.h"
+#include "GeneralServices.h"
+#include "cpuEarlyInit.h"
+#include "cpuRegisters.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVE_F10REVEUTILITIES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set down core register on a revision E processor.
+ *
+ * This function set F3x190 Downcore Control Register[5:0]
+ *
+ * @param[in]   FamilySpecificServices   The current Family Specific Services.
+ * @param[in]   Socket                   Socket ID.
+ * @param[in]   Module                   Module ID in socket.
+ * @param[in]   LeveledCores             Number of core.
+ * @param[in]   CoreLevelMode            Core level mode.
+ * @param[in]   StdHeader                Header for library and services.
+ *
+ * @retval      TRUE                     Down Core register is updated.
+ * @retval      FALSE                    Down Core register is not updated.
+ */
+BOOLEAN
+F10CommonRevESetDownCoreRegister (
+  IN       CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices,
+  IN       UINT32 *Socket,
+  IN       UINT32 *Module,
+  IN       UINT32 *LeveledCores,
+  IN       CORE_LEVELING_TYPE CoreLevelMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32    TempVar32_a;
+  UINT32    CoreDisableBits;
+  PCI_ADDR  PciAddress;
+  BOOLEAN   IsUpdated;
+  AGESA_STATUS AgesaStatus;
+
+  IsUpdated = FALSE;
+
+  switch (*LeveledCores) {
+  case 1:
+    CoreDisableBits = DOWNCORE_MASK_SINGLE;
+    break;
+  case 2:
+    CoreDisableBits = DOWNCORE_MASK_DUAL;
+    break;
+  case 3:
+    CoreDisableBits = DOWNCORE_MASK_TRI;
+    break;
+  case 4:
+    CoreDisableBits = DOWNCORE_MASK_FOUR;
+    break;
+  case 5:
+    CoreDisableBits = DOWNCORE_MASK_FIVE;
+    break;
+  default:
+    CoreDisableBits = 0;
+    break;
+  }
+
+  if (CoreDisableBits != 0) {
+    if (GetPciAddress (StdHeader, (UINT8) *Socket, (UINT8) *Module, &PciAddress, &AgesaStatus)) {
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = NORTH_BRIDGE_CAPABILITIES_REG;
+
+      LibAmdPciRead (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+      TempVar32_a = ((TempVar32_a >> 12) & 0x3) | ((TempVar32_a >> 13) & 0x4);
+      if (TempVar32_a == 0) {
+        CoreDisableBits &= 0x1;
+      } else if (TempVar32_a == 1) {
+        CoreDisableBits &= 0x3;
+      } else if (TempVar32_a == 2) {
+        CoreDisableBits &= 0x7;
+      } else if (TempVar32_a == 3) {
+        CoreDisableBits &= 0x0F;
+      } else if (TempVar32_a == 4) {
+        CoreDisableBits &= 0x1F;
+      } else if (TempVar32_a == 5) {
+        CoreDisableBits &= 0x3F;
+      }
+      PciAddress.Address.Register = DOWNCORE_CTRL;
+      LibAmdPciRead (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+      if ((TempVar32_a | CoreDisableBits) != TempVar32_a) {
+        TempVar32_a |= CoreDisableBits;
+        LibAmdPciWrite (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+        IsUpdated = TRUE;
+      }
+    }
+  }
+
+  return IsUpdated;
+}
+
+
+CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F10RevECoreLeveling =
+{
+  0,
+  F10CommonRevESetDownCoreRegister
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Get CPU pstate current on a revision E processor.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_IDD_MAX}.
+ *
+ *    This function returns the ProcIddMax.
+ *
+ *  @param[in]     FamilySpecificServices    The current Family Specific Services.
+ *  @param[in]     Pstate                    The P-state to check.
+ *  @param[out]    ProcIddMax                P-state current in mA.
+ *  @param[in]     StdHeader                 Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                      P-state is enabled
+ *  @retval        FALSE                     P-state is disabled
+ */
+BOOLEAN
+F10CommonRevEGetProcIddMax (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT8                  Pstate,
+     OUT   UINT32                 *ProcIddMax,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       IddDiv;
+  UINT32       CmpCap;
+  UINT32       LocalPciRegister;
+  UINT32       MsrAddress;
+  UINT32       MultiNodeCpu;
+  UINT64       PstateMsr;
+  BOOLEAN      IsPstateEnabled;
+  PCI_ADDR     PciAddress;
+
+  IsPstateEnabled = FALSE;
+
+  MsrAddress = (UINT32) (Pstate + PS_REG_BASE);
+  ASSERT (MsrAddress <= PS_MAX_REG);
+
+  LibAmdMsrRead (MsrAddress, &PstateMsr, StdHeader);
+  if (((PSTATE_MSR *) &PstateMsr)->PsEnable == 1) {
+    OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = NB_CAPS_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3xE8
+
+    switch (((PSTATE_MSR *) &PstateMsr)->IddDiv) {
+    case 0:
+      IddDiv = 1000;
+      break;
+    case 1:
+      IddDiv = 100;
+      break;
+    case 2:
+      IddDiv = 10;
+      break;
+    default:  // IddDiv = 3 is reserved. Use 10
+      ASSERT (FALSE);
+      IddDiv = 10;
+      break;
+    }
+    MultiNodeCpu = (UINT32) (((NB_CAPS_REGISTER *) &LocalPciRegister)->MultiNodeCpu + 1);
+    CmpCap = (UINT32) (((NB_CAPS_REGISTER *) &LocalPciRegister)->CmpCapHi << 2);
+    CmpCap |= (UINT32) (((NB_CAPS_REGISTER *) &LocalPciRegister)->CmpCapLo);
+    CmpCap++;
+    *ProcIddMax = (UINT32) ((PSTATE_MSR *) &PstateMsr)->IddValue * IddDiv * CmpCap * MultiNodeCpu;
+    IsPstateEnabled = TRUE;
+  }
+  return IsPstateEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Determines the NB clock on the desired node.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_NB_PSTATE_INFO}.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     PlatformConfig          Platform profile/build option config structure.
+ *  @param[in]     PciAddress              The segment, bus, and device numbers of the CPU in question.
+ *  @param[in]     NbPstate                The NB P-state number to check.
+ *  @param[out]    FreqNumeratorInMHz      The desired node's frequency numerator in megahertz.
+ *  @param[out]    FreqDivisor             The desired node's frequency divisor.
+ *  @param[out]    VoltageInuV             The desired node's voltage in microvolts.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                    NbPstate is valid
+ *  @retval        FALSE                   NbPstate is disabled or invalid
+ */
+BOOLEAN
+F10CommonRevEGetNbPstateInfo (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+  IN       UINT32                 NbPstate,
+     OUT   UINT32                 *FreqNumeratorInMHz,
+     OUT   UINT32                 *FreqDivisor,
+     OUT   UINT32                 *VoltageInuV,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32   LocalPciRegister;
+  UINT64   LocalMsrRegister;
+  BOOLEAN  PstateIsValid;
+
+  PstateIsValid = FALSE;
+  if (NbPstate == 0) {
+    PciAddress->Address.Function = FUNC_3;
+    PciAddress->Address.Register = CPTC0_REG;
+    LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+    *FreqNumeratorInMHz = ((((CLK_PWR_TIMING_CTRL_REGISTER *) &LocalPciRegister)->NbFid + 4) * 200);
+    *FreqDivisor = 1;
+    LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+    *VoltageInuV = (1550000 - (12500 * ((UINT32) ((COFVID_STS_MSR *) &LocalMsrRegister)->CurNbVid)));
+    PstateIsValid = TRUE;
+  }
+  return PstateIsValid;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the node's minimum and maximum northbridge frequency.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_MIN_MAX_NB_FREQ}.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     PlatformConfig          Platform profile/build option config structure.
+ *  @param[in]     PciAddress              The segment, bus, and device numbers of the CPU in question.
+ *  @param[out]    MinFreqInMHz            The node's minimum northbridge frequency.
+ *  @param[out]    MaxFreqInMHz            The node's maximum northbridge frequency.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        AGESA_STATUS            Northbridge frequency is valid
+ */
+AGESA_STATUS
+F10RevEGetMinMaxNbFrequency (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+     OUT   UINT32                 *MinFreqInMHz,
+     OUT   UINT32                 *MaxFreqInMHz,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       LocalPciRegister;
+
+  PciAddress->Address.Function = FUNC_3;
+  PciAddress->Address.Register = CPTC0_REG;
+  LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+  *MinFreqInMHz = ((((CLK_PWR_TIMING_CTRL_REGISTER *) &LocalPciRegister)->NbFid + 4) * 200);
+  *MaxFreqInMHz = *MinFreqInMHz;
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns whether or not BIOS is responsible for configuring the NB COFVID.
+ *
+ *  @CpuServiceMethod{::F_CPU_IS_NBCOF_INIT_NEEDED}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]   PciAddress               The northbridge to query by pci base address.
+ *  @param[out]  NbVidUpdateAll           Do all NbVids need to be updated
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      TRUE                    Perform northbridge frequency and voltage config.
+ *  @retval      FALSE                   Do not configure them.
+ */
+BOOLEAN
+F10CommonRevEGetNbCofVidUpdate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       PCI_ADDR *PciAddress,
+     OUT   BOOLEAN *NbVidUpdateAll,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 ProductInfoRegister;
+
+  PciAddress->Address.Register = PRCT_INFO_REG;
+  PciAddress->Address.Function = FUNC_3;
+  LibAmdPciRead (AccessWidth32, *PciAddress, &ProductInfoRegister, StdHeader);
+  *NbVidUpdateAll = (BOOLEAN) (((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->NbVidUpdateAll == 1);
+  return (BOOLEAN) (((PRODUCT_INFO_REGISTER *) &ProductInfoRegister)->NbCofVidUpdate == 1);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the number of physical cores of current processor.
+ *
+ * @CpuServiceMethod{::F_CPU_NUMBER_OF_PHYSICAL_CORES}.
+ *
+ * @param[in]      FamilySpecificServices         The current Family Specific Services.
+ * @param[in]      StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ * @return         The number of physical cores.
+ */
+UINT8
+F10CommonRevEGetNumberOfPhysicalCores (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       CmpCap;
+  UINT32       LocalPciRegister;
+  PCI_ADDR     PciAddress;
+
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = NB_CAPS_REG;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  CmpCap = (UINT8) (((NB_CAPS_REGISTER *) &LocalPciRegister)->CmpCapHi << 2);
+  CmpCap |= (UINT8) (((NB_CAPS_REGISTER *) &LocalPciRegister)->CmpCapLo);
+
+  return (UINT8) (CmpCap + 1);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhEquivalenceTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhEquivalenceTable.c
new file mode 100644
index 0000000000..5f85f5d9c2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhEquivalenceTable.c
@@ -0,0 +1,105 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Pharaoh Hound Equivalence Table related data
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVE_PH_F10PHEQUIVALENCETABLE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST UINT16 ROMDATA CpuF10PhMicrocodeEquivalenceTable[] =
+{
+  0x10a0, 0x10a0
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the appropriate microcode patch equivalent ID table.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  PhEquivalenceTablePtr    Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10PhMicrocodeEquivalenceTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **PhEquivalenceTablePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = ((sizeof (CpuF10PhMicrocodeEquivalenceTable) / sizeof (UINT16)) / 2);
+  *PhEquivalenceTablePtr = CpuF10PhMicrocodeEquivalenceTable;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhHtPhyTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhHtPhyTables.c
new file mode 100644
index 0000000000..f59130077f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhHtPhyTables.c
@@ -0,0 +1,117 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Pharaoh Hound Ht Phy tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVE_PH_F10PHHTPHYTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  HT   Phy   T a b l e s
+// -------------------------
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10PhHtPhyRegisters[] =
+{
+// 0x520A
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_PH_E0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_ALL,                   //
+      0x520A,                               // Address
+      0x00004000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+// 0x530A
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_PH_E0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_ALL,                   //
+      0x530A,                               // Address
+      0x00004000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10PhHtPhyRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10PhHtPhyRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10PhHtPhyRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhLogicalIdTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhLogicalIdTables.c
new file mode 100644
index 0000000000..1cd88cab93
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhLogicalIdTables.c
@@ -0,0 +1,96 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Pharaoh Hound Logical ID Table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVE_PH_F10PHLOGICALIDTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+STATIC CONST CPU_LOGICAL_ID_XLAT ROMDATA CpuF10PhLogicalIdAndRevArray[] =
+{
+  {
+    0x10a0,
+    AMD_F10_PH_E0
+  },
+};
+
+VOID
+GetF10PhLogicalIdAndRev (
+     OUT   CONST CPU_LOGICAL_ID_XLAT **PhIdPtr,
+     OUT   UINT8 *NumberOfElements,
+     OUT   UINT64 *LogicalFamily,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = (sizeof (CpuF10PhLogicalIdAndRevArray) / sizeof (CPU_LOGICAL_ID_XLAT));
+  *PhIdPtr = CpuF10PhLogicalIdAndRevArray;
+  *LogicalFamily = AMD_FAMILY_10_PH;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhMicrocodePatchTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhMicrocodePatchTables.c
new file mode 100644
index 0000000000..6c5ff707fc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/RevE/PH/F10PhMicrocodePatchTables.c
@@ -0,0 +1,105 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Pharaoh Hound PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_REVE_PH_F10PHMICROCODEPATCHTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern CONST MICROCODE_PATCHES ROMDATA *CpuF10PhMicroCodePatchArray[];
+extern CONST UINT8 ROMDATA CpuF10PhNumberOfMicrocodePatches;
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns a table containing the appropriate microcode patches.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  PhUcodePtr               Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10PhMicroCodePatchesStruct (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **PhUcodePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = CpuF10PhNumberOfMicrocodePatches;
+  *PhUcodePtr = &CpuF10PhMicroCodePatchArray[0];
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuCommonF10Utilities.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuCommonF10Utilities.c
new file mode 100644
index 0000000000..ea7f20a908
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuCommonF10Utilities.c
@@ -0,0 +1,329 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 10h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuCommonF10Utilities.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUCOMMONF10UTILITIES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/**
+ * Node ID MSR register fields.
+ * Provide the layout of fields in the Node ID MSR.
+ */
+typedef struct {
+  UINT64    NodeId:3;                 ///< The core is on the node with this node id.
+  UINT64    NodesPerProcessor:3;      ///< The number of Nodes in this processor.
+  UINT64    HeapIndex:6;              ///< The AP core heap index.
+  UINT64    :(63 - 11);               ///< Reserved.
+} NODE_ID_MSR_FIELDS;
+
+/// Node ID MSR.
+typedef union {
+  NODE_ID_MSR_FIELDS   Fields;        ///< Access the register as individual fields
+  UINT64               Value;         ///< Access the register value.
+} NODE_ID_MSR;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Set warm reset status and count
+ *
+ *  @CpuServiceMethod{::F_CPU_SET_WARM_RESET_FLAG}.
+ *
+ *  This function will use bit9, and bit 10 of register F0x6C as a warm reset status and count.
+ *
+ *  @param[in]  FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]  StdHeader                Handle of Header for calling lib functions and services.
+ *  @param[in]  Request                  Indicate warm reset status
+ *
+ */
+VOID
+F10SetAgesaWarmResetFlag (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       WARM_RESET_REQUEST *Request
+  )
+{
+  PCI_ADDR  PciAddress;
+  UINT32    PciData;
+
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_0, HT_INIT_CTRL);
+  LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+  // bit[5] - indicate a warm reset is or is not required
+  PciData &= ~(HT_INIT_BIOS_RST_DET_0);
+  PciData = PciData | (Request->RequestBit << 5);
+
+  // bit[10,9] - indicate warm reset status and count
+  PciData &= ~(HT_INIT_BIOS_RST_DET_1 | HT_INIT_BIOS_RST_DET_2);
+  PciData |= Request->StateBits << 9;
+
+  LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Get warm reset status and count
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_WARM_RESET_FLAG}.
+ *
+ *  This function will bit9, and bit 10 of register F0x6C as a warm reset status and count.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]   StdHeader                Config handle for library and services
+ *  @param[out]  Request                  Indicate warm reset status
+ *
+ */
+VOID
+F10GetAgesaWarmResetFlag (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+     OUT   WARM_RESET_REQUEST *Request
+  )
+{
+  PCI_ADDR  PciAddress;
+  UINT32    PciData;
+
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_0, HT_INIT_CTRL);
+  LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+  // bit[5] - indicate a warm reset is or is not required
+  Request->RequestBit = (UINT8) ((PciData & HT_INIT_BIOS_RST_DET_0) >> 5);
+  // bit[10,9] - indicate warm reset status and count
+  Request->StateBits = (UINT8) ((PciData & (HT_INIT_BIOS_RST_DET_1 | HT_INIT_BIOS_RST_DET_2)) >> 9);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Use the Mailbox Register to get the Ap Mailbox info for the current core.
+ *
+ *  @CpuServiceMethod{::F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE}.
+ *
+ *  Access the mailbox register used with this NB family.  This is valid until the
+ *  point that some init code initializes the mailbox register for its normal use.
+ *  The Machine Check Misc (Thresholding) register is available as both a PCI config
+ *  register and a MSR, so it can be used as a mailbox from HT to other functions.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[out]    ApMailboxInfo           The AP Mailbox info
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+F10GetApMailboxFromHardware (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+     OUT   AP_MAILBOXES           *ApMailboxInfo,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT64 MailboxInfo;
+
+  LibAmdMsrRead (MSR_MC_MISC_LINK_THRESHOLD, &MailboxInfo, StdHeader);
+  // Mailbox info is in bits 32 thru 43, 12 bits.
+  ApMailboxInfo->ApMailInfo.Info = (((UINT32) (MailboxInfo >> 32)) & (UINT32)0x00000FFF);
+  LibAmdMsrRead (MSR_MC_MISC_L3_THRESHOLD, &MailboxInfo, StdHeader);
+  // Mailbox info is in bits 32 thru 43, 12 bits.
+  ApMailboxInfo->ApMailExtInfo.Info = (((UINT32) (MailboxInfo >> 32)) & (UINT32)0x00000FFF);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Set the system AP core number in the AP's Mailbox.
+ *
+ *  @CpuServiceMethod{::F_CPU_SET_AP_CORE_NUMBER}.
+ *
+ *  Access the mailbox register used with this NB family.  This is only intended to
+ *  run on the BSC at the time of initial AP launch.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     Socket                  The AP's socket
+ *  @param[in]     Module                  The AP's module
+ *  @param[in]     ApCoreNumber            The AP's unique core number
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+F10SetApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT32                 Socket,
+  IN       UINT32                 Module,
+  IN       UINT32                 ApCoreNumber,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32   LocalPciRegister;
+  PCI_ADDR PciAddress;
+  AGESA_STATUS IgnoredStatus;
+
+  GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus);
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = 0x170;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  ((AP_MAIL_EXT_INFO *) &LocalPciRegister)->Fields.HeapIndex = ApCoreNumber;
+  LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Get this AP's system core number from hardware.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_AP_CORE_NUMBER}.
+ *
+ *  Returns the system core number from the scratch MSR, where
+ *  it was saved at heap initialization.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @return        The AP's unique core number
+ */
+UINT32
+F10GetApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  NODE_ID_MSR NodeIdMsr;
+
+  LibAmdMsrRead (0xC001100C, &NodeIdMsr.Value, StdHeader);
+  return (UINT32) NodeIdMsr.Fields.HeapIndex;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Move the AP's core number from the mailbox to hardware.
+ *
+ *  @CpuServiceMethod{::F_CPU_TRANSFER_AP_CORE_NUMBER}.
+ *
+ *  Transfers this AP's system core number from the mailbox to
+ *  the NodeId MSR and initializes the other NodeId fields.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+F10TransferApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  AP_MAILBOXES Mailboxes;
+  NODE_ID_MSR NodeIdMsr;
+  UINT64 ExtFeatures;
+
+  NodeIdMsr.Value = 0;
+  FamilySpecificServices->GetApMailboxFromHardware (FamilySpecificServices, &Mailboxes, StdHeader);
+  NodeIdMsr.Fields.HeapIndex = Mailboxes.ApMailExtInfo.Fields.HeapIndex;
+  NodeIdMsr.Fields.NodeId = Mailboxes.ApMailInfo.Fields.Node;
+  NodeIdMsr.Fields.NodesPerProcessor = Mailboxes.ApMailInfo.Fields.ModuleType;
+  LibAmdMsrWrite (0xC001100C, &NodeIdMsr.Value, StdHeader);
+
+  // Indicate that the NodeId MSR is supported.
+  LibAmdMsrRead (MSR_CPUID_EXT_FEATS, &ExtFeatures, StdHeader);
+  ExtFeatures = (ExtFeatures | BIT51);
+  LibAmdMsrWrite (MSR_CPUID_EXT_FEATS, &ExtFeatures, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Return a number zero or one, based on the Core ID position in the initial APIC Id.
+ *
+ * @CpuServiceMethod{::F_CORE_ID_POSITION_IN_INITIAL_APIC_ID}.
+ *
+ * @param[in]     FamilySpecificServices  The current Family Specific Services.
+ * @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ * @retval        CoreIdPositionZero      Core Id is not low
+ * @retval        CoreIdPositionOne       Core Id is low
+ */
+CORE_ID_POSITION
+F10CpuAmdCoreIdPositionInInitialApicId (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT64 InitApicIdCpuIdLo;
+
+  //  Check bit_54 [InitApicIdCpuIdLo] to find core id position.
+  LibAmdMsrRead (MSR_NB_CFG, &InitApicIdCpuIdLo, StdHeader);
+  InitApicIdCpuIdLo = ((InitApicIdCpuIdLo & BIT54) >> 54);
+  return ((InitApicIdCpuIdLo == 0) ? CoreIdPositionZero : CoreIdPositionOne);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuCommonF10Utilities.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuCommonF10Utilities.h
new file mode 100644
index 0000000000..a09feb1764
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuCommonF10Utilities.h
@@ -0,0 +1,120 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 10h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  IDS
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_COMMON_F10_UTILITES_H_
+#define _CPU_COMMON_F10_UTILITES_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F10GetApMailboxFromHardware (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+     OUT   AP_MAILBOXES           *ApMailboxInfo,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+CORE_ID_POSITION
+F10CpuAmdCoreIdPositionInInitialApicId (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+F10SetApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT32                 Socket,
+  IN       UINT32                 Module,
+  IN       UINT32                 ApCoreNumber,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+UINT32
+F10GetApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+F10TransferApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+F10SetAgesaWarmResetFlag (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       WARM_RESET_REQUEST *Request
+  );
+
+VOID
+F10GetAgesaWarmResetFlag (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+     OUT   WARM_RESET_REQUEST *Request
+  );
+
+#endif  // _CPU_COMMON_F10_UTILITES_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandId.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandId.c
new file mode 100644
index 0000000000..edda5bcbba
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandId.c
@@ -0,0 +1,160 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BrandId related functions and structures.
+ *
+ * Contains code that provides CPU BrandId information
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10BRANDID_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF10BrandIdString1 (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **BrandString1Ptr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+GetF10BrandIdString2 (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **BrandString2Ptr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+extern CPU_BRAND_TABLE *F10BrandIdString1Tables[];
+extern CPU_BRAND_TABLE *F10BrandIdString2Tables[];
+extern CONST UINT8 F10BrandIdString1TableCount;
+extern CONST UINT8 F10BrandIdString2TableCount;
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns a table containing the appropriate beginnings of the CPU brandstring.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  BrandString1Ptr          Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10BrandIdString1 (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **BrandString1Ptr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPU_BRAND_TABLE **TableEntryPtr;
+
+  TableEntryPtr = &F10BrandIdString1Tables[0];
+  *BrandString1Ptr = TableEntryPtr;
+  *NumberOfElements = F10BrandIdString1TableCount;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns a table containing the appropriate endings of the CPU brandstring.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  BrandString2Ptr          Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10BrandIdString2 (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **BrandString2Ptr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPU_BRAND_TABLE **TableEntryPtr;
+
+  TableEntryPtr = &F10BrandIdString2Tables[0];
+  *BrandString2Ptr = TableEntryPtr;
+  *NumberOfElements = F10BrandIdString2TableCount;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdAm3.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdAm3.c
new file mode 100644
index 0000000000..9aaf777ade
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdAm3.c
@@ -0,0 +1,335 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BrandId related functions and structures for socket Am3.
+ *
+ * Contains code that provides CPU BrandId information
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+// PRIVATE FORMAT FOR BRAND TABLE ... FOR AMD USE ONLY
+
+// String1
+/*CHAR8 strEngSample[] = "AMD Engineering Sample";
+CHAR8 strTtkSample[] = "AMD Thermal Test Kit";
+CHAR8 strUnknown[] = "AMD Processor model unknown";
+*/
+//AM3 NC 0
+CONST CHAR8 ROMDATA str_F10_Am3_SC_AthlonLE[] =  "AMD Athlon(tm) Processor LE-";
+CONST CHAR8 ROMDATA str_F10_Am3_SC_SempronLE[] = "AMD Sempron(tm) Processor LE-";
+CONST CHAR8 ROMDATA str_F10_Am3_SC_Sempron_1[] = "AMD Sempron(tm) 1";
+CONST CHAR8 ROMDATA str_F10_Am3_SC_Athlon_1[] = "AMD Athlon(tm) II 1";
+
+//AM3 NC 1
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon[] = "AMD Athlon(tm) ";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_XL_V[] = "AMD Athlon(tm) II XL V";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_XLT_V[] = "AMD Athlon(tm) II XLT V";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X2_4[] = "AMD Athlon(tm) II X2 4";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X2_2[] = "AMD Athlon(tm) II X2 2";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X2_B[] = "AMD Athlon(tm) II X2 B";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X2[] = "AMD Athlon(tm) II X2 ";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_Neo_X2[] = "AMD Athlon(tm) II Neo X2 ";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X2_5[] = "AMD Phenom(tm) II X2 5";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X2_5[] = "AMD Athlon(tm) II X2 5";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X2_3[] = "AMD Athlon(tm) II X2 3";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X2[] = "AMD Phenom(tm) II X2 ";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X2_B[] = "AMD Phenom(tm) II X2 B";
+CONST CHAR8 ROMDATA str_F10_Am3_DC_Opteron13[] = "Dual-Core AMD Opteron(tm) Processor 13";
+CONST CHAR8 ROMDATA str_F10_Am3_Sempron_X2_1[] = "AMD Sempron(tm) X2 1";
+
+//AM3 NC2
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom[] = "AMD Phenom(tm) ";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X3_5[] = "AMD Phenom(tm) II X3 5";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X3_4[] = "AMD Phenom(tm) II X3 4";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X3_B[] = "AMD Phenom(tm) II X3 B";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X3[] = "AMD Phenom(tm) II X3 ";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X3_3[] = "AMD Athlon(tm) II X3 3";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_Neo_X3[] = "AMD Athlon(tm) II Neo X3 ";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X3_4[] = "AMD Athlon(tm) II X3 4";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X3_7[] = "AMD Phenom(tm) II X3 7";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X3_B[] = "AMD Athlon(tm) II X3 B";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X3[] = "AMD Athlon(tm) II X3 ";
+
+//AM3 NC 3
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_FX[] =  "AMD Phenom(tm) FX-";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X4_9[] = "AMD Phenom(tm) II X4 9";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X4_8[] = "AMD Phenom(tm) II X4 8";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X4_7[] = "AMD Phenom(tm) II X4 7";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X4_6[] = "AMD Phenom(tm) II X4 6";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X4_B[] = "AMD Phenom(tm) II X4 B";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X4[] = "AMD Phenom(tm) II X4 ";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_Neo_X4[] = "AMD Phenom(tm) II Neo X4 ";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X4_6[] = "AMD Athlon(tm) II X4 6";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X4_5[] = "AMD Athlon(tm) II X4 5";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_Neo_X4[] = "AMD Athlon(tm) II Neo X4 ";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X4_B[] = "AMD Athlon(tm) II X4 B";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II__FX[] = "AMD Phenom(tm) II FX-";
+CONST CHAR8 ROMDATA str_F10_Am3_Athlon_II_X4[] = "AMD Athlon(tm) II X4 ";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II[] = "AMD Phenom(tm) II ";
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_XLT_Q[] = "AMD Phenom(tm) II XLT Q";
+CONST CHAR8 ROMDATA str_F10_Am3_QC_Opteron13[] = "Quad-Core AMD Opteron(tm) Processor 13";
+
+//AM3 NC 5
+CONST CHAR8 ROMDATA str_F10_Am3_Phenom_II_X6_1[] =  "AMD Phenom(tm) II X6 1";
+
+// String2
+CONST CHAR8 ROMDATA str2_F10_Am3_SE[] = " SE";
+CONST CHAR8 ROMDATA str2_F10_Am3_HE[] = " HE";
+CONST CHAR8 ROMDATA str2_F10_Am3_EE[] = " EE";
+
+CONST CHAR8 ROMDATA str2_F10_Am3_QCP[] = " Quad-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_00[] = "00";
+CONST CHAR8 ROMDATA str2_F10_Am3_10[] = "10";
+CONST CHAR8 ROMDATA str2_F10_Am3_20[] = "20";
+CONST CHAR8 ROMDATA str2_F10_Am3_30[] = "30";
+CONST CHAR8 ROMDATA str2_F10_Am3_40[] = "40";
+CONST CHAR8 ROMDATA str2_F10_Am3_50[] = "50";
+CONST CHAR8 ROMDATA str2_F10_Am3_60[] = "60";
+CONST CHAR8 ROMDATA str2_F10_Am3_70[] = "70";
+CONST CHAR8 ROMDATA str2_F10_Am3_80[] = "80";
+CONST CHAR8 ROMDATA str2_F10_Am3_90[] = "90";
+CONST CHAR8 ROMDATA str2_F10_Am3_DC_00[] = "00 Dual-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_DC_00e[] = "00e Dual-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_DC_00B[] = "00B Dual-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_DC_50[] = "50 Dual-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_DC_50e[] = "50e Dual-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_DC_50B[] = "50B Dual-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_Processor[] = " Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_e_Processor[] = "e Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_B_Processor[] = "B Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_0e_Processor[] = "0e Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_u_Processor[] = "u Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_0_Processor[] = "0 Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_L_Processor[] = "L Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_C_Processor[] = "C Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_TWKR_Black_Edition[] = " TWKR Black Edition";
+
+CONST CHAR8 ROMDATA str2_F10_Am3_TC_00[] = "00 Triple-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_TC_00e[] = "00e Triple-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_TC_00B[] = "00B Triple-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_TC_50[] = "50 Triple-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_TC_50e[] = "50e Triple-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_TC_50B[] = "50B Triple-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_QC_00[] = "00 Quad-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_QC_00e[] = "00e Quad-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_QC_00B[] = "00B Quad-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_QC_50[] = "50 Quad-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_QC_50e[] = "50e Quad-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_QC_50B[] = "50B Quad-Core Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_QC_T[] = "T Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_SC_0T[] = "0T Processor";
+CONST CHAR8 ROMDATA str2_F10_Am3_SC_5T[] = "5T Processor";
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString1ArrayAm3[] =
+{
+  // AM3
+  {1, 0, 0, DR_SOCKET_AM3, str_F10_Am3_SC_AthlonLE, sizeof (str_F10_Am3_SC_AthlonLE)},
+  {1, 0, 1, DR_SOCKET_AM3, str_F10_Am3_SC_SempronLE, sizeof (str_F10_Am3_SC_SempronLE)},
+  {1, 0, 2, DR_SOCKET_AM3, str_F10_Am3_SC_Sempron_1, sizeof (str_F10_Am3_SC_Sempron_1)},
+  {1, 0, 3, DR_SOCKET_AM3, str_F10_Am3_SC_Athlon_1, sizeof (str_F10_Am3_SC_Athlon_1)},
+
+  {2, 0, 0, DR_SOCKET_AM3, str_F10_Am3_DC_Opteron13, sizeof (str_F10_Am3_DC_Opteron13)},
+  {2, 0, 1, DR_SOCKET_AM3, str_F10_Am3_Athlon, sizeof (str_F10_Am3_Athlon)},
+  {2, 0, 2, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X2_4, sizeof (str_F10_Am3_Athlon_II_X2_4)},
+  {2, 0, 3, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X2_2, sizeof (str_F10_Am3_Athlon_II_X2_2)},
+  {2, 0, 4, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X2_B, sizeof (str_F10_Am3_Athlon_II_X2_B)},
+  {2, 0, 5, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X2, sizeof (str_F10_Am3_Athlon_II_X2)},
+  {2, 0, 6, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_Neo_X2, sizeof (str_F10_Am3_Athlon_II_Neo_X2)},
+  {2, 0, 7, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X2_5, sizeof (str_F10_Am3_Phenom_II_X2_5)},
+  {2, 0, 8, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X2_5, sizeof (str_F10_Am3_Athlon_II_X2_5)},
+  {2, 0, 9, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X2_3, sizeof (str_F10_Am3_Athlon_II_X2_3)},
+  {2, 0, 10, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X2, sizeof (str_F10_Am3_Phenom_II_X2)},
+  {2, 0, 11, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X2_B, sizeof (str_F10_Am3_Phenom_II_X2_B)},
+  {2, 0, 12, DR_SOCKET_AM3, str_F10_Am3_Sempron_X2_1, sizeof (str_F10_Am3_Sempron_X2_1)},
+  {2, 1, 1, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_XLT_V, sizeof (str_F10_Am3_Athlon_II_XLT_V)},
+  {2, 1, 2, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_XL_V, sizeof (str_F10_Am3_Athlon_II_XL_V)},
+
+  {3, 0, 0, DR_SOCKET_AM3, str_F10_Am3_Phenom, sizeof (str_F10_Am3_Phenom)},
+  {3, 0, 1, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X3_5, sizeof (str_F10_Am3_Phenom_II_X3_5)},
+  {3, 0, 2, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X3_4, sizeof (str_F10_Am3_Phenom_II_X3_4)},
+  {3, 0, 3, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X3_B, sizeof (str_F10_Am3_Phenom_II_X3_B)},
+  {3, 0, 4, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X3, sizeof (str_F10_Am3_Phenom_II_X3)},
+  {3, 0, 5, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X3_3, sizeof (str_F10_Am3_Athlon_II_X3_3)},
+  {3, 0, 6, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_Neo_X3, sizeof (str_F10_Am3_Athlon_II_Neo_X3)},
+  {3, 0, 7, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X3_4, sizeof (str_F10_Am3_Athlon_II_X3_4)},
+  {3, 0, 8, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X3_7, sizeof (str_F10_Am3_Phenom_II_X3_7)},
+  {3, 0, 9, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X3_B, sizeof (str_F10_Am3_Athlon_II_X3_B)},
+  {3, 0, 10, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X3, sizeof (str_F10_Am3_Athlon_II_X3)},
+
+  {4, 0, 0, DR_SOCKET_AM3, str_F10_Am3_QC_Opteron13, sizeof (str_F10_Am3_QC_Opteron13)},
+  {4, 0, 1, DR_SOCKET_AM3, str_F10_Am3_Phenom_FX, sizeof (str_F10_Am3_Phenom_FX)},
+  {4, 0, 2, DR_SOCKET_AM3, str_F10_Am3_Phenom, sizeof (str_F10_Am3_Phenom)},
+  {4, 0, 3, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X4_9, sizeof (str_F10_Am3_Phenom_II_X4_9)},
+  {4, 0, 4, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X4_8, sizeof (str_F10_Am3_Phenom_II_X4_8)},
+  {4, 0, 5, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X4_7, sizeof (str_F10_Am3_Phenom_II_X4_7)},
+  {4, 0, 6, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X4_6, sizeof (str_F10_Am3_Phenom_II_X4_6)},
+  {4, 0, 7, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X4_B, sizeof (str_F10_Am3_Phenom_II_X4_B)},
+  {4, 0, 8, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X4, sizeof (str_F10_Am3_Phenom_II_X4)},
+  {4, 0, 9, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_Neo_X4, sizeof (str_F10_Am3_Phenom_II_Neo_X4)},
+  {4, 0, 10, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X4_6, sizeof (str_F10_Am3_Athlon_II_X4_6)},
+  {4, 0, 11, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X4_5, sizeof (str_F10_Am3_Athlon_II_X4_5)},
+  {4, 0, 12, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_Neo_X4, sizeof (str_F10_Am3_Athlon_II_Neo_X4)},
+  {4, 0, 13, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X4_B, sizeof (str_F10_Am3_Athlon_II_X4_B)},
+  {4, 0, 14, DR_SOCKET_AM3, str_F10_Am3_Phenom_II__FX, sizeof (str_F10_Am3_Phenom_II__FX)},
+  {4, 0, 15, DR_SOCKET_AM3, str_F10_Am3_Athlon_II_X4, sizeof (str_F10_Am3_Athlon_II_X4)},
+  {4, 1, 0, DR_SOCKET_AM3, str_F10_Am3_Phenom_II, sizeof (str_F10_Am3_Phenom_II)},
+  {4, 1, 1, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_XLT_Q, sizeof (str_F10_Am3_Phenom_II_XLT_Q)},
+  {4, 1, 2, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X4_9, sizeof (str_F10_Am3_Phenom_II_X4_9)},
+  {4, 1, 3, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X4_8, sizeof (str_F10_Am3_Phenom_II_X4_8)},
+  {4, 1, 4, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X4_6, sizeof (str_F10_Am3_Phenom_II_X4_6)},
+
+  {6, 0, 0, DR_SOCKET_AM3, str_F10_Am3_Phenom_II_X6_1, sizeof (str_F10_Am3_Phenom_II_X6_1)}
+};    //Cores, page, index, socket, stringstart, stringlength
+
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString2ArrayAm3[] =
+{
+  // AM3
+  {1, 0, 0x00, DR_SOCKET_AM3, str2_F10_Am3_00, sizeof (str2_F10_Am3_00)},
+  {1, 0, 0x01, DR_SOCKET_AM3, str2_F10_Am3_10, sizeof (str2_F10_Am3_10)},
+  {1, 0, 0x02, DR_SOCKET_AM3, str2_F10_Am3_20, sizeof (str2_F10_Am3_20)},
+  {1, 0, 0x03, DR_SOCKET_AM3, str2_F10_Am3_30, sizeof (str2_F10_Am3_30)},
+  {1, 0, 0x04, DR_SOCKET_AM3, str2_F10_Am3_40, sizeof (str2_F10_Am3_40)},
+  {1, 0, 0x05, DR_SOCKET_AM3, str2_F10_Am3_50, sizeof (str2_F10_Am3_50)},
+  {1, 0, 0x06, DR_SOCKET_AM3, str2_F10_Am3_60, sizeof (str2_F10_Am3_60)},
+  {1, 0, 0x07, DR_SOCKET_AM3, str2_F10_Am3_70, sizeof (str2_F10_Am3_70)},
+  {1, 0, 0x08, DR_SOCKET_AM3, str2_F10_Am3_80, sizeof (str2_F10_Am3_80)},
+  {1, 0, 0x09, DR_SOCKET_AM3, str2_F10_Am3_90, sizeof (str2_F10_Am3_90)},
+  {1, 0, 0x0A, DR_SOCKET_AM3, str2_F10_Am3_Processor, sizeof (str2_F10_Am3_Processor)},
+  {1, 0, 0x0B, DR_SOCKET_AM3, str2_F10_Am3_u_Processor, sizeof (str2_F10_Am3_u_Processor)},
+  {1, 0, 0x0F, DR_SOCKET_AM3, 0, 0},    //Size 0 for no suffix
+  {2, 0, 0x00, DR_SOCKET_AM3, str2_F10_Am3_DC_00, sizeof (str2_F10_Am3_DC_00)},
+  {2, 0, 0x01, DR_SOCKET_AM3, str2_F10_Am3_DC_00e, sizeof (str2_F10_Am3_DC_00e)},
+  {2, 0, 0x02, DR_SOCKET_AM3, str2_F10_Am3_DC_00B, sizeof (str2_F10_Am3_DC_00B)},
+  {2, 0, 0x03, DR_SOCKET_AM3, str2_F10_Am3_DC_50, sizeof (str2_F10_Am3_DC_50)},
+  {2, 0, 0x04, DR_SOCKET_AM3, str2_F10_Am3_DC_50e, sizeof (str2_F10_Am3_DC_50e)},
+  {2, 0, 0x05, DR_SOCKET_AM3, str2_F10_Am3_DC_50B, sizeof (str2_F10_Am3_DC_50B)},
+  {2, 0, 0x06, DR_SOCKET_AM3, str2_F10_Am3_Processor, sizeof (str2_F10_Am3_Processor)},
+  {2, 0, 0x07, DR_SOCKET_AM3, str2_F10_Am3_e_Processor, sizeof (str2_F10_Am3_e_Processor)},
+  {2, 0, 0x08, DR_SOCKET_AM3, str2_F10_Am3_B_Processor, sizeof (str2_F10_Am3_B_Processor)},
+  {2, 0, 0x09, DR_SOCKET_AM3, str2_F10_Am3_0_Processor, sizeof (str2_F10_Am3_0_Processor)},
+  {2, 0, 0x0A, DR_SOCKET_AM3, str2_F10_Am3_0e_Processor, sizeof (str2_F10_Am3_0e_Processor)},
+  {2, 0, 0x0B, DR_SOCKET_AM3, str2_F10_Am3_u_Processor, sizeof (str2_F10_Am3_u_Processor)},
+  {2, 0, 0x0F, DR_SOCKET_AM3, 0, 0},    // Size 0 for no suffix
+  {2, 1, 0x01, DR_SOCKET_AM3, str2_F10_Am3_L_Processor, sizeof (str2_F10_Am3_L_Processor)},
+  {2, 1, 0x02, DR_SOCKET_AM3, str2_F10_Am3_C_Processor, sizeof (str2_F10_Am3_C_Processor)},
+  {3, 0, 0x00, DR_SOCKET_AM3, str2_F10_Am3_TC_00, sizeof (str2_F10_Am3_TC_00)},
+  {3, 0, 0x01, DR_SOCKET_AM3, str2_F10_Am3_TC_00e, sizeof (str2_F10_Am3_TC_00e)},
+  {3, 0, 0x02, DR_SOCKET_AM3, str2_F10_Am3_TC_00B, sizeof (str2_F10_Am3_TC_00B)},
+  {3, 0, 0x03, DR_SOCKET_AM3, str2_F10_Am3_TC_50, sizeof (str2_F10_Am3_TC_50)},
+  {3, 0, 0x04, DR_SOCKET_AM3, str2_F10_Am3_TC_50e, sizeof (str2_F10_Am3_TC_50e)},
+  {3, 0, 0x05, DR_SOCKET_AM3, str2_F10_Am3_TC_50B, sizeof (str2_F10_Am3_TC_50B)},
+  {3, 0, 0x06, DR_SOCKET_AM3, str2_F10_Am3_Processor, sizeof (str2_F10_Am3_Processor)},
+  {3, 0, 0x07, DR_SOCKET_AM3, str2_F10_Am3_e_Processor, sizeof (str2_F10_Am3_e_Processor)},
+  {3, 0, 0x08, DR_SOCKET_AM3, str2_F10_Am3_B_Processor, sizeof (str2_F10_Am3_B_Processor)},
+  {3, 0, 0x09, DR_SOCKET_AM3, str2_F10_Am3_0e_Processor, sizeof (str2_F10_Am3_0e_Processor)},
+  {3, 0, 0x0A, DR_SOCKET_AM3, str2_F10_Am3_0_Processor, sizeof (str2_F10_Am3_0_Processor)},
+  {3, 0, 0x0F, DR_SOCKET_AM3, 0, 0},    //Size 0 for no suffix
+  {4, 0, 0x00, DR_SOCKET_AM3, str2_F10_Am3_QC_00, sizeof (str2_F10_Am3_QC_00)},
+  {4, 0, 0x01, DR_SOCKET_AM3, str2_F10_Am3_QC_00e, sizeof (str2_F10_Am3_QC_00e)},
+  {4, 0, 0x02, DR_SOCKET_AM3, str2_F10_Am3_QC_00B, sizeof (str2_F10_Am3_QC_00B)},
+  {4, 0, 0x03, DR_SOCKET_AM3, str2_F10_Am3_QC_50, sizeof (str2_F10_Am3_QC_50)},
+  {4, 0, 0x04, DR_SOCKET_AM3, str2_F10_Am3_QC_50e, sizeof (str2_F10_Am3_QC_50e)},
+  {4, 0, 0x05, DR_SOCKET_AM3, str2_F10_Am3_QC_50B, sizeof (str2_F10_Am3_QC_50B)},
+  {4, 0, 0x06, DR_SOCKET_AM3, str2_F10_Am3_Processor, sizeof (str2_F10_Am3_Processor)},
+  {4, 0, 0x07, DR_SOCKET_AM3, str2_F10_Am3_e_Processor, sizeof (str2_F10_Am3_e_Processor)},
+  {4, 0, 0x08, DR_SOCKET_AM3, str2_F10_Am3_B_Processor, sizeof (str2_F10_Am3_B_Processor)},
+  {4, 0, 0x09, DR_SOCKET_AM3, str2_F10_Am3_0e_Processor, sizeof (str2_F10_Am3_0e_Processor)},
+  {4, 0, 0x0A, DR_SOCKET_AM3, str2_F10_Am3_SE, sizeof (str2_F10_Am3_SE)},
+  {4, 0, 0x0B, DR_SOCKET_AM3, str2_F10_Am3_HE, sizeof (str2_F10_Am3_HE)},
+  {4, 0, 0x0C, DR_SOCKET_AM3, str2_F10_Am3_EE, sizeof (str2_F10_Am3_EE)},
+  {4, 0, 0x0D, DR_SOCKET_AM3, str2_F10_Am3_QCP, sizeof (str2_F10_Am3_QCP)},
+  {4, 0, 0x0E, DR_SOCKET_AM3, str2_F10_Am3_0_Processor, sizeof (str2_F10_Am3_0_Processor)},
+  {4, 0, 0x0F, DR_SOCKET_AM3, 0, 0},    //Size 0 for no suffix
+  {4, 1, 0x00, DR_SOCKET_AM3, str2_F10_Am3_TWKR_Black_Edition, sizeof (str2_F10_Am3_TWKR_Black_Edition)},
+  {4, 1, 0x01, DR_SOCKET_AM3, str2_F10_Am3_L_Processor, sizeof (str2_F10_Am3_L_Processor)},
+  {4, 1, 0x04, DR_SOCKET_AM3, str2_F10_Am3_QC_T, sizeof (str2_F10_Am3_QC_T)},
+  {6, 0, 0x00, DR_SOCKET_AM3, str2_F10_Am3_SC_5T, sizeof (str2_F10_Am3_SC_5T)},
+  {6, 0, 0x01, DR_SOCKET_AM3, str2_F10_Am3_SC_0T, sizeof (str2_F10_Am3_SC_0T)},
+  {6, 0, 0x0F, DR_SOCKET_AM3, 0, 0}    //Size 0 for no suffix
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayAm3 = {
+  (sizeof (CpuF10BrandIdString1ArrayAm3) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString1ArrayAm3
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayAm3 = {
+  (sizeof (CpuF10BrandIdString2ArrayAm3) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString2ArrayAm3
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdAsb2.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdAsb2.c
new file mode 100644
index 0000000000..50e5d0397c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdAsb2.c
@@ -0,0 +1,136 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BrandId related functions and structures for package ASB2.
+ *
+ * Contains code that provides CPU BrandId information
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+// String1
+CONST CHAR8 ROMDATA str_F10_Asb2_AMD_V[] = "AMD V";
+CONST CHAR8 ROMDATA str_F10_Asb2_Athlon_II_Neo_K[] = "AMD Athlon(tm) II Neo K";
+CONST CHAR8 ROMDATA str_F10_Asb2_Athlon_II_Neo_N[] = "AMD Athlon(tm) II Neo N";
+CONST CHAR8 ROMDATA str_F10_Asb2_Athlon_II_Neo_R[] = "AMD Athlon(tm) II Neo R";
+CONST CHAR8 ROMDATA str_F10_Asb2_Turion_II_Neo_K[] = "AMD Turion(tm) II Neo K";
+CONST CHAR8 ROMDATA str_F10_Asb2_Turion_II_Neo_N[] = "AMD Turion(tm) II Neo N";
+
+// String2
+CONST CHAR8 ROMDATA str_F10_Asb2_5_Processor[] = "5 Processor";
+CONST CHAR8 ROMDATA str_F10_Asb2_5_Dual_Core_Processor[] = "5 Dual-Core Processor";
+CONST CHAR8 ROMDATA str_F10_Asb2_L_Processor[] = "L Processor";
+CONST CHAR8 ROMDATA str_F10_Asb2_L_Dual_Core_Processor[] = "L Dual-Core Processor";
+CONST CHAR8 ROMDATA str_F10_Asb2_H_Dual_Core_Processor[] = "H Dual-Core Processor";
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString1ArrayAsb2[] =
+{
+  // ASB2
+  {1, 0, 1, DR_SOCKET_ASB2, str_F10_Asb2_Athlon_II_Neo_K, sizeof (str_F10_Asb2_Athlon_II_Neo_K)},
+  {1, 0, 2, DR_SOCKET_ASB2, str_F10_Asb2_AMD_V, sizeof (str_F10_Asb2_AMD_V)},
+  {1, 0, 3, DR_SOCKET_ASB2, str_F10_Asb2_Athlon_II_Neo_R, sizeof (str_F10_Asb2_Athlon_II_Neo_R)},
+  {2, 0, 1, DR_SOCKET_ASB2, str_F10_Asb2_Turion_II_Neo_K, sizeof (str_F10_Asb2_Turion_II_Neo_K)},
+  {2, 0, 2, DR_SOCKET_ASB2, str_F10_Asb2_Athlon_II_Neo_K, sizeof (str_F10_Asb2_Athlon_II_Neo_K)},
+  {2, 0, 3, DR_SOCKET_ASB2, str_F10_Asb2_AMD_V, sizeof (str_F10_Asb2_AMD_V)},
+  {2, 0, 4, DR_SOCKET_ASB2, str_F10_Asb2_Turion_II_Neo_N, sizeof (str_F10_Asb2_Turion_II_Neo_N)},
+  {2, 0, 5, DR_SOCKET_ASB2, str_F10_Asb2_Athlon_II_Neo_N, sizeof (str_F10_Asb2_Athlon_II_Neo_N)}
+};    //Cores, page, index, socket, stringstart, stringlength
+
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString2ArrayAsb2[] =
+{
+  // ASB2
+  {1, 0, 0x01, DR_SOCKET_ASB2, str_F10_Asb2_5_Processor, sizeof (str_F10_Asb2_5_Processor)},
+  {1, 0, 0x02, DR_SOCKET_ASB2, str_F10_Asb2_L_Processor, sizeof (str_F10_Asb2_L_Processor)},
+  {2, 0, 0x01, DR_SOCKET_ASB2, str_F10_Asb2_5_Dual_Core_Processor, sizeof (str_F10_Asb2_5_Dual_Core_Processor)},
+  {2, 0, 0x02, DR_SOCKET_ASB2, str_F10_Asb2_L_Dual_Core_Processor, sizeof (str_F10_Asb2_L_Dual_Core_Processor)},
+  {2, 0, 0x04, DR_SOCKET_ASB2, str_F10_Asb2_H_Dual_Core_Processor, sizeof (str_F10_Asb2_H_Dual_Core_Processor)},
+  {1, 0, 0x0F, DR_SOCKET_ASB2, 0, 0},    //Size 0 for no suffix
+  {2, 0, 0x0F, DR_SOCKET_ASB2, 0, 0},    //Size 0 for no suffix
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayAsb2 = {
+  (sizeof (CpuF10BrandIdString1ArrayAsb2) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString1ArrayAsb2
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayAsb2 = {
+  (sizeof (CpuF10BrandIdString2ArrayAsb2) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString2ArrayAsb2
+};
+
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdC32.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdC32.c
new file mode 100644
index 0000000000..c5a6fe19d6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdC32.c
@@ -0,0 +1,135 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BrandId related functions and structures for socket C32.
+ *
+ * Contains code that provides CPU BrandId information
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+// PRIVATE FORMAT FOR BRAND TABLE ... FOR AMD USE ONLY
+
+// String1
+CONST CHAR8 ROMDATA str_F10_C32_Opteron_41[] = "AMD Opteron(tm) Processor 41";
+CONST CHAR8 ROMDATA str_F10_C32_Embedded_Opteron[] = "Embedded AMD Opteron(tm) Processor ";
+
+// String2
+CONST CHAR8 ROMDATA str2_F10_C32_HE[] = " HE";
+CONST CHAR8 ROMDATA str2_F10_C32_EE[] = " EE";
+CONST CHAR8 ROMDATA str2_F10_C32_QS_HE[] = "QS HE";
+CONST CHAR8 ROMDATA str2_F10_C32_LE_HE[] = "LE HE";
+CONST CHAR8 ROMDATA str2_F10_C32_KX_HE[] = "KX HE";
+CONST CHAR8 ROMDATA str2_F10_C32_GL_EE[] = "GL EE";
+CONST CHAR8 ROMDATA str2_F10_C32_CL_EE[] = "CL EE";
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString1ArrayC32[] =
+{
+  // C32r1 string1:
+  {4, 0, 0x00, DR_SOCKET_C32, str_F10_C32_Opteron_41, sizeof (str_F10_C32_Opteron_41)},
+  {4, 1, 0x01, DR_SOCKET_C32, str_F10_C32_Embedded_Opteron, sizeof (str_F10_C32_Embedded_Opteron)},
+  {6, 0, 0x00, DR_SOCKET_C32, str_F10_C32_Opteron_41, sizeof (str_F10_C32_Opteron_41)},
+  {6, 1, 0x01, DR_SOCKET_C32, str_F10_C32_Embedded_Opteron, sizeof (str_F10_C32_Embedded_Opteron)}
+};    //Cores, page, index, socket, stringstart, stringlength
+
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString2ArrayC32[] =
+{
+  // C32r1 string2:
+  {4, 0, 0x00, DR_SOCKET_C32, str2_F10_C32_HE, sizeof (str2_F10_C32_HE)},
+  {4, 0, 0x01, DR_SOCKET_C32, str2_F10_C32_EE, sizeof (str2_F10_C32_EE)},
+  {4, 0, 0x0F, DR_SOCKET_C32, 0, 0},  //Size 0 for no suffix
+  {4, 1, 0x01, DR_SOCKET_C32, str2_F10_C32_QS_HE, sizeof (str2_F10_C32_QS_HE)},
+  {4, 1, 0x02, DR_SOCKET_C32, str2_F10_C32_LE_HE, sizeof (str2_F10_C32_LE_HE)},
+  {4, 1, 0x03, DR_SOCKET_C32, str2_F10_C32_CL_EE, sizeof (str2_F10_C32_CL_EE)},
+  {6, 0, 0x00, DR_SOCKET_C32, str2_F10_C32_HE, sizeof (str2_F10_C32_HE)},
+  {6, 0, 0x01, DR_SOCKET_C32, str2_F10_C32_EE, sizeof (str2_F10_C32_EE)},
+  {6, 0, 0x0F, DR_SOCKET_C32, 0, 0},  //Size 0 for no suffix
+  {6, 1, 0x01, DR_SOCKET_C32, str2_F10_C32_KX_HE, sizeof (str2_F10_C32_KX_HE)},
+  {6, 1, 0x02, DR_SOCKET_C32, str2_F10_C32_GL_EE, sizeof (str2_F10_C32_GL_EE)}
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayC32 = {
+  (sizeof (CpuF10BrandIdString1ArrayC32) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString1ArrayC32
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayC32 = {
+  (sizeof (CpuF10BrandIdString2ArrayC32) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString2ArrayC32
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdFr1207.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdFr1207.c
new file mode 100644
index 0000000000..4c87430406
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdFr1207.c
@@ -0,0 +1,179 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BrandId related functions and structures for socket Fr1207.
+ *
+ * Contains code that provides CPU BrandId information
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+// PRIVATE FORMAT FOR BRAND TABLE ... FOR AMD USE ONLY
+
+// String1
+/*CHAR8 strEngSample[] = "AMD Engineering Sample";
+CHAR8 strTtkSample[] = "AMD Thermal Test Kit";
+CHAR8 strUnknown[] = "AMD Processor model unknown";
+*/
+CONST CHAR8 ROMDATA str_F10_Fr1207_DC_Opteron83[] = "Dual-Core AMD Opteron(tm) Processor 83";
+CONST CHAR8 ROMDATA str_F10_Fr1207_DC_Opteron23[] = "Dual-Core AMD Opteron(tm) Processor 23";
+CONST CHAR8 ROMDATA str_F10_Fr1207_QC_Opteron83[] = "Quad-Core AMD Opteron(tm) Processor 83";
+CONST CHAR8 ROMDATA str_F10_Fr1207_QC_Opteron23[] = "Quad-Core AMD Opteron(tm) Processor 23";
+CONST CHAR8 ROMDATA str_F10_Fr1207_eQC_Opteron83[] = "Embedded AMD Opteron(tm) Processor 83";
+CONST CHAR8 ROMDATA str_F10_Fr1207_eQC_Opteron23[] = "Embedded AMD Opteron(tm) Processor 23";
+CONST CHAR8 ROMDATA str_F10_Fr1207_eQC_Opteron13[] = "Embedded AMD Opteron(tm) Processor 13";
+CONST CHAR8 ROMDATA str_F10_Fr1207_Embedded_Opteron[] = "Embedded AMD Opteron(tm) Processor ";
+CONST CHAR8 ROMDATA str_F10_Fr1207_SC_Opteron84[] = "Six-Core AMD Opteron(tm) Processor 84";
+CONST CHAR8 ROMDATA str_F10_Fr1207_SC_Opteron24[] = "Six-Core AMD Opteron(tm) Processor 24";
+
+CONST CHAR8 ROMDATA str_F10_Fr1207_PhenomFX[] =  "AMD Phenom(tm) FX-";
+
+
+// String2
+CONST CHAR8 ROMDATA str2_F10_Fr1207_SE[] = " SE";
+CONST CHAR8 ROMDATA str2_F10_Fr1207_HE[] = " HE";
+CONST CHAR8 ROMDATA str2_F10_Fr1207_EE[] = " EE";
+CONST CHAR8 ROMDATA str2_F10_Fr1207_VS[] = "VS";
+CONST CHAR8 ROMDATA str2_F10_Fr1207_QS[] = "QS";
+
+CONST CHAR8 ROMDATA str2_F10_Fr1207_NP_HE[] = "NP HE";
+CONST CHAR8 ROMDATA str2_F10_Fr1207_GF_HE[] = "GF HE";
+CONST CHAR8 ROMDATA str2_F10_Fr1207_HF_HE[] = "HF HE";
+CONST CHAR8 ROMDATA str2_F10_Fr1207_QS_HE[] = "QS HE";
+CONST CHAR8 ROMDATA str2_F10_Fr1207_KH_HE[] = "KH HE";
+CONST CHAR8 ROMDATA str2_F10_Fr1207_KS_EE[] = "KS EE";
+CONST CHAR8 ROMDATA str2_F10_Fr1207_KS_HE[] = "KS HE";
+
+CONST CHAR8 ROMDATA str2_F10_Fr1207_QCP[] = " Quad-Core Processor";
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString1ArrayFr1207[] =
+{
+  // FR2/FR4 1207
+  {2, 0, 0, DR_SOCKET_1207, str_F10_Fr1207_DC_Opteron83, sizeof (str_F10_Fr1207_DC_Opteron83)},
+  {2, 0, 1, DR_SOCKET_1207, str_F10_Fr1207_DC_Opteron23, sizeof (str_F10_Fr1207_DC_Opteron23)},
+  {3, 0, 0, DR_SOCKET_1207, str_F10_Fr1207_Embedded_Opteron, sizeof (str_F10_Fr1207_Embedded_Opteron)},
+  {4, 0, 0, DR_SOCKET_1207, str_F10_Fr1207_QC_Opteron83, sizeof (str_F10_Fr1207_QC_Opteron83)},
+  {4, 0, 1, DR_SOCKET_1207, str_F10_Fr1207_QC_Opteron23, sizeof (str_F10_Fr1207_QC_Opteron23)},
+  {4, 0, 2, DR_SOCKET_1207, str_F10_Fr1207_eQC_Opteron83, sizeof (str_F10_Fr1207_eQC_Opteron83)},
+  {4, 0, 3, DR_SOCKET_1207, str_F10_Fr1207_eQC_Opteron23, sizeof (str_F10_Fr1207_eQC_Opteron23)},
+  {4, 0, 4, DR_SOCKET_1207, str_F10_Fr1207_eQC_Opteron13, sizeof (str_F10_Fr1207_eQC_Opteron13)},
+  {4, 0, 5, DR_SOCKET_1207, str_F10_Fr1207_PhenomFX, sizeof (str_F10_Fr1207_PhenomFX)},
+  {4, 1, 1, DR_SOCKET_1207, str_F10_Fr1207_Embedded_Opteron, sizeof (str_F10_Fr1207_Embedded_Opteron)},
+  {6, 0, 0, DR_SOCKET_1207, str_F10_Fr1207_SC_Opteron84, sizeof (str_F10_Fr1207_SC_Opteron84)},
+  {6, 0, 1, DR_SOCKET_1207, str_F10_Fr1207_SC_Opteron24, sizeof (str_F10_Fr1207_SC_Opteron24)},
+  {6, 1, 1, DR_SOCKET_1207, str_F10_Fr1207_Embedded_Opteron, sizeof (str_F10_Fr1207_Embedded_Opteron)},
+};    //Cores, page, index, socket, stringstart, stringlength
+
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString2ArrayFr1207[] =
+{
+  // FR2/FR4 1207
+  {2, 0, 0x0A, DR_SOCKET_1207, str2_F10_Fr1207_SE, sizeof (str2_F10_Fr1207_SE)},
+  {2, 0, 0x0B, DR_SOCKET_1207, str2_F10_Fr1207_HE, sizeof (str2_F10_Fr1207_HE)},
+  {2, 0, 0x0C, DR_SOCKET_1207, str2_F10_Fr1207_EE, sizeof (str2_F10_Fr1207_EE)},
+  {2, 0, 0x0F, DR_SOCKET_1207, 0, 0},    //Size 0 for no suffix
+  {3, 0, 0x00, DR_SOCKET_1207, str2_F10_Fr1207_NP_HE, sizeof (str2_F10_Fr1207_NP_HE)},
+  {3, 0, 0x0F, DR_SOCKET_1207, 0, 0},    //Size 0 for no suffix
+  {4, 0, 0x0A, DR_SOCKET_1207, str2_F10_Fr1207_SE, sizeof (str2_F10_Fr1207_SE)},
+  {4, 0, 0x0B, DR_SOCKET_1207, str2_F10_Fr1207_HE, sizeof (str2_F10_Fr1207_HE)},
+  {4, 0, 0x0C, DR_SOCKET_1207, str2_F10_Fr1207_EE, sizeof (str2_F10_Fr1207_EE)},
+  {4, 0, 0x0D, DR_SOCKET_1207, str2_F10_Fr1207_QCP, sizeof (str2_F10_Fr1207_QCP)},
+  {4, 0, 0x0F, DR_SOCKET_1207, 0, 0},    //Size 0 for no suffix
+  {4, 1, 0x01, DR_SOCKET_1207, str2_F10_Fr1207_GF_HE, sizeof (str2_F10_Fr1207_GF_HE)},
+  {4, 1, 0x02, DR_SOCKET_1207, str2_F10_Fr1207_HF_HE, sizeof (str2_F10_Fr1207_HF_HE)},
+  {4, 1, 0x03, DR_SOCKET_1207, str2_F10_Fr1207_VS, sizeof (str2_F10_Fr1207_VS)},
+  {4, 1, 0x04, DR_SOCKET_1207, str2_F10_Fr1207_QS_HE, sizeof (str2_F10_Fr1207_QS_HE)},
+  {4, 1, 0x05, DR_SOCKET_1207, str2_F10_Fr1207_NP_HE, sizeof (str2_F10_Fr1207_NP_HE)},
+  {4, 1, 0x06, DR_SOCKET_1207, str2_F10_Fr1207_KH_HE, sizeof (str2_F10_Fr1207_KH_HE)},
+  {4, 1, 0x07, DR_SOCKET_1207, str2_F10_Fr1207_KS_EE, sizeof (str2_F10_Fr1207_KS_EE)},
+  {6, 0, 0x00, DR_SOCKET_1207, str2_F10_Fr1207_SE, sizeof (str2_F10_Fr1207_SE)},
+  {6, 0, 0x01, DR_SOCKET_1207, str2_F10_Fr1207_HE, sizeof (str2_F10_Fr1207_HE)},
+  {6, 0, 0x02, DR_SOCKET_1207, str2_F10_Fr1207_EE, sizeof (str2_F10_Fr1207_EE)},
+  {6, 0, 0x0F, DR_SOCKET_1207, 0, 0},    //Size 0 for no suffix
+  {6, 1, 0x01, DR_SOCKET_1207, str2_F10_Fr1207_QS, sizeof (str2_F10_Fr1207_QS)},
+  {6, 1, 0x02, DR_SOCKET_1207, str2_F10_Fr1207_KS_HE, sizeof (str2_F10_Fr1207_KS_HE)},
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayFr1207 = {
+  (sizeof (CpuF10BrandIdString1ArrayFr1207) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString1ArrayFr1207
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayFr1207 = {
+  (sizeof (CpuF10BrandIdString2ArrayFr1207) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString2ArrayFr1207
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdG34.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdG34.c
new file mode 100644
index 0000000000..0df104e12d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdG34.c
@@ -0,0 +1,127 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BrandId related functions and structures for socket G34.
+ *
+ * Contains code that provides CPU BrandId information
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+// PRIVATE FORMAT FOR BRAND TABLE ... FOR AMD USE ONLY
+
+// String1
+CONST CHAR8 ROMDATA str_F10_G34_Opteron_61[] = "AMD Opteron(tm) Processor 61";
+CONST CHAR8 ROMDATA str_F10_G34_Embedded_Opteron[] = "Embedded AMD Opteron(tm) Processor ";
+
+// String2
+CONST CHAR8 ROMDATA str2_F10_G34_SE[] = " SE";
+CONST CHAR8 ROMDATA str2_F10_G34_HE[] = " HE";
+CONST CHAR8 ROMDATA str2_F10_G34_QS[] = "QS";
+CONST CHAR8 ROMDATA str2_F10_G34_KS[] = "KS";
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString1ArrayG34[] =
+{
+  // G34r1 string1:
+  {8, 0, 0x00, DR_SOCKET_G34, str_F10_G34_Opteron_61, sizeof (str_F10_G34_Opteron_61)},
+  {8, 1, 0x01, DR_SOCKET_G34, str_F10_G34_Embedded_Opteron, sizeof (str_F10_G34_Embedded_Opteron)},
+  {12, 0, 0x00, DR_SOCKET_G34, str_F10_G34_Opteron_61, sizeof (str_F10_G34_Opteron_61)}
+};    //Cores, page, index, socket, stringstart, stringlength
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString2ArrayG34[] =
+{
+  // G34r1 string2:
+  {8, 0, 0x00, DR_SOCKET_G34, str2_F10_G34_HE, sizeof (str2_F10_G34_HE)},
+  {8, 0, 0x01, DR_SOCKET_G34, str2_F10_G34_SE, sizeof (str2_F10_G34_SE)},
+  {8, 1, 0x01, DR_SOCKET_G34, str2_F10_G34_QS, sizeof (str2_F10_G34_QS)},
+  {8, 1, 0x02, DR_SOCKET_G34, str2_F10_G34_KS, sizeof (str2_F10_G34_KS)},
+  {8, 0, 0x0F, DR_SOCKET_G34, 0, 0},  //Size 0 for no suffix
+  {12, 0, 0x00, DR_SOCKET_G34, str2_F10_G34_HE, sizeof (str2_F10_G34_HE)},
+  {12, 0, 0x01, DR_SOCKET_G34, str2_F10_G34_SE, sizeof (str2_F10_G34_SE)},
+  {12, 0, 0x0F, DR_SOCKET_G34, 0, 0}  //Size 0 for no suffix
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayG34 = {
+  (sizeof (CpuF10BrandIdString1ArrayG34) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString1ArrayG34
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayG34 = {
+  (sizeof (CpuF10BrandIdString2ArrayG34) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString2ArrayG34
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdS1g3.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdS1g3.c
new file mode 100644
index 0000000000..c2f8f6981a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdS1g3.c
@@ -0,0 +1,128 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BrandId related functions and structures for socket S1g3.
+ *
+ * Contains code that provides CPU BrandId information
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+// PRIVATE FORMAT FOR BRAND TABLE ... FOR AMD USE ONLY
+
+// String1
+/*CHAR8 strEngSample[] = "AMD Engineering Sample";
+CHAR8 strTtkSample[] = "AMD Thermal Test Kit";
+CHAR8 strUnknown[] = "AMD Processor model unknown";
+*/
+// S1g3 NC 0
+CONST CHAR8 ROMDATA str_F10_S1g3_Sempron_M1[] = "AMD Sempron(tm) M1";
+
+// S1g3 NC 1
+CONST CHAR8 ROMDATA str_F10_S1g3_Turion_II_U_DC_M_M6[] = "AMD Turion(tm) II Ultra Dual-Core Mobile M6";
+CONST CHAR8 ROMDATA str_F10_S1g3_Turion_II_DC_M_M5[] = "AMD Turion(tm) II Dual-Core Mobile M5";
+CONST CHAR8 ROMDATA str_F10_S1g3_Athlon_II_DC_M3[] = "AMD Athlon(tm) II Dual-Core M3";
+
+// String2
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString1ArrayS1g3[] =
+{
+  // S1g3
+  {1, 0, 0, DR_SOCKET_S1G3, str_F10_S1g3_Sempron_M1, sizeof (str_F10_S1g3_Sempron_M1)},
+  {2, 0, 0, DR_SOCKET_S1G3, str_F10_S1g3_Turion_II_U_DC_M_M6, sizeof (str_F10_S1g3_Turion_II_U_DC_M_M6)},
+  {2, 0, 1, DR_SOCKET_S1G3, str_F10_S1g3_Turion_II_DC_M_M5, sizeof (str_F10_S1g3_Turion_II_DC_M_M5)},
+  {2, 0, 2, DR_SOCKET_S1G3, str_F10_S1g3_Athlon_II_DC_M3, sizeof (str_F10_S1g3_Athlon_II_DC_M3)}
+};    //Cores, page, index, socket, stringstart, stringlength
+
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString2ArrayS1g3[] =
+{
+  // S1g3
+  {1, 0, 0x0F, DR_SOCKET_S1G3, 0, 0},    //Size 0 for no suffix
+  {2, 0, 0x0F, DR_SOCKET_S1G3, 0, 0}     //Size 0 for no suffix
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayS1g3 = {
+  (sizeof (CpuF10BrandIdString1ArrayS1g3) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString1ArrayS1g3
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayS1g3 = {
+  (sizeof (CpuF10BrandIdString2ArrayS1g3) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString2ArrayS1g3
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdS1g4.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdS1g4.c
new file mode 100644
index 0000000000..6ec940e147
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10BrandIdS1g4.c
@@ -0,0 +1,142 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BrandId related functions and structures for package S1g4.
+ *
+ * Contains code that provides CPU BrandId information
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+// String1
+CONST CHAR8 ROMDATA str_F10_S1g4_AMD_V[] = "AMD V";
+CONST CHAR8 ROMDATA str_F10_S1g4_Turion_II_P[] = "AMD Turion(tm) II P";
+CONST CHAR8 ROMDATA str_F10_S1g4_Athlon_II_P[] = "AMD Athlon(tm) II P";
+CONST CHAR8 ROMDATA str_F10_S1g4_Phenom_II_X[] = "AMD Phenom(tm) II X";
+CONST CHAR8 ROMDATA str_F10_S1g4_Turion_II_N[] = "AMD Turion(tm) II N";
+CONST CHAR8 ROMDATA str_F10_S1g4_Athlon_II_N[] = "AMD Athlon(tm) II N";
+CONST CHAR8 ROMDATA str_F10_S1g4_Phenom_II_P[] = "AMD Phenom(tm) II P";
+CONST CHAR8 ROMDATA str_F10_S1g4_Phenom_II_N[] = "AMD Phenom(tm) II N";
+
+// String2
+CONST CHAR8 ROMDATA str_F10_S1g4_0_Processor[] = "0 Processor";
+CONST CHAR8 ROMDATA str_F10_S1g4_0_Dual_Core_Processor[] = "0 Dual-Core Processor";
+CONST CHAR8 ROMDATA str_F10_S1g4_0_Triple_Core_Processor[] = "0 Triple-Core Processor";
+CONST CHAR8 ROMDATA str_F10_S1g4_0_Quad_Core_Processor[] = "0 Quad-Core Processor";
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString1ArrayS1g4[] =
+{
+  // S1g4
+  {1, 0, 1, DR_SOCKET_S1G4, str_F10_S1g4_AMD_V, sizeof (str_F10_S1g4_AMD_V)},
+  {2, 0, 3, DR_SOCKET_S1G4, str_F10_S1g4_Turion_II_P, sizeof (str_F10_S1g4_Turion_II_P)},
+  {2, 0, 4, DR_SOCKET_S1G4, str_F10_S1g4_Athlon_II_P, sizeof (str_F10_S1g4_Athlon_II_P)},
+  {2, 0, 5, DR_SOCKET_S1G4, str_F10_S1g4_Phenom_II_X, sizeof (str_F10_S1g4_Phenom_II_X)},
+  {2, 0, 6, DR_SOCKET_S1G4, str_F10_S1g4_Phenom_II_N, sizeof (str_F10_S1g4_Phenom_II_N)},
+  {2, 0, 7, DR_SOCKET_S1G4, str_F10_S1g4_Turion_II_N, sizeof (str_F10_S1g4_Turion_II_N)},
+  {2, 0, 8, DR_SOCKET_S1G4, str_F10_S1g4_Athlon_II_N, sizeof (str_F10_S1g4_Athlon_II_N)},
+  {2, 0, 9, DR_SOCKET_S1G4, str_F10_S1g4_Phenom_II_P, sizeof (str_F10_S1g4_Phenom_II_P)},
+  {3, 0, 2, DR_SOCKET_S1G4, str_F10_S1g4_Phenom_II_P, sizeof (str_F10_S1g4_Phenom_II_P)},
+  {3, 0, 3, DR_SOCKET_S1G4, str_F10_S1g4_Phenom_II_N, sizeof (str_F10_S1g4_Phenom_II_N)},
+  {3, 0, 4, DR_SOCKET_S1G4, str_F10_S1g4_Phenom_II_X, sizeof (str_F10_S1g4_Phenom_II_X)},
+  {4, 0, 1, DR_SOCKET_S1G4, str_F10_S1g4_Phenom_II_P, sizeof (str_F10_S1g4_Phenom_II_P)},
+  {4, 0, 2, DR_SOCKET_S1G4, str_F10_S1g4_Phenom_II_X, sizeof (str_F10_S1g4_Phenom_II_X)},
+  {4, 0, 3, DR_SOCKET_S1G4, str_F10_S1g4_Phenom_II_N, sizeof (str_F10_S1g4_Phenom_II_N)}
+};    //Cores, page, index, socket, stringstart, stringlength
+
+
+CONST AMD_CPU_BRAND ROMDATA CpuF10BrandIdString2ArrayS1g4[] =
+{
+  // S1g4
+  {1, 0, 0x01, DR_SOCKET_S1G4, str_F10_S1g4_0_Processor, sizeof (str_F10_S1g4_0_Processor)},
+  {2, 0, 0x02, DR_SOCKET_S1G4, str_F10_S1g4_0_Dual_Core_Processor, sizeof (str_F10_S1g4_0_Dual_Core_Processor)},
+  {3, 0, 0x02, DR_SOCKET_S1G4, str_F10_S1g4_0_Triple_Core_Processor, sizeof (str_F10_S1g4_0_Triple_Core_Processor)},
+  {4, 0, 0x01, DR_SOCKET_S1G4, str_F10_S1g4_0_Quad_Core_Processor, sizeof (str_F10_S1g4_0_Quad_Core_Processor)},
+  {1, 0, 0x0F, DR_SOCKET_S1G4, 0, 0},    //Size 0 for no suffix
+  {2, 0, 0x0F, DR_SOCKET_S1G4, 0, 0},    //Size 0 for no suffix
+  {3, 0, 0x0F, DR_SOCKET_S1G4, 0, 0},    //Size 0 for no suffix
+  {4, 0, 0x0F, DR_SOCKET_S1G4, 0, 0}     //Size 0 for no suffix
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString1ArrayS1g4 = {
+  (sizeof (CpuF10BrandIdString1ArrayS1g4) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString1ArrayS1g4
+};
+
+
+CONST CPU_BRAND_TABLE ROMDATA F10BrandIdString2ArrayS1g4 = {
+  (sizeof (CpuF10BrandIdString2ArrayS1g4) / sizeof (AMD_CPU_BRAND)),
+  CpuF10BrandIdString2ArrayS1g4
+};
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10CacheDefaults.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10CacheDefaults.c
new file mode 100644
index 0000000000..6ba8ed8aa3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10CacheDefaults.c
@@ -0,0 +1,131 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 ROM Execution Cache Defaults
+ *
+ * Contains default values for ROM execution cache setup
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuCacheInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10CACHEDEFAULTS_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GetF10CacheInfo (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **CacheInfoPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+#define MEM_TRAINING_BUFFER_SIZE  16384
+#define VAR_MTRR_MASK             0x0000FFFFFFFFFFFF
+#define VAR_MTRR_MASK_CP          VAR_MTRR_MASK
+
+#define HEAP_BASE_MASK            0x0000FFFFFFFFFFFF
+
+#define SHARED_MEM_SIZE       0
+
+CONST CACHE_INFO ROMDATA CpuF10CacheInfo =
+{
+  BSP_STACK_SIZE_32K,
+  CORE0_STACK_SIZE,
+  CORE1_STACK_SIZE,
+  MEM_TRAINING_BUFFER_SIZE,
+  SHARED_MEM_SIZE,
+  VAR_MTRR_MASK,
+  VAR_MTRR_MASK,
+  HEAP_BASE_MASK,
+  LimitedByL2Size
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the family specific properties of the cache, and its usage.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  CacheInfoPtr             Points to the cache info properties on exit.
+ *  @param[out]  NumberOfElements         Will be one to indicate one entry.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10CacheInfo (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **CacheInfoPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = 1;
+  *CacheInfoPtr = &CpuF10CacheInfo;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10CacheFlushOnHalt.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10CacheFlushOnHalt.c
new file mode 100644
index 0000000000..f48932d7e3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10CacheFlushOnHalt.c
@@ -0,0 +1,167 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Cache Flush On Halt Function.
+ *
+ * Contains code to initialize Cache Flush On Halt feature for Family 10h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPostInit.h"
+#include "cpuFeatures.h"
+#include "OptionMultiSocket.h"
+#include "cpuF10PowerMgmt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10CACHEFLUSHONHALT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+SetF10CacheFlushOnHaltRegister (
+  IN       CPU_CFOH_FAMILY_SERVICES     *FamilySpecificServices,
+  IN       UINT64                       EntryPoint,
+  IN       PLATFORM_CONFIGURATION       *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS            *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          P U B L I C     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *    Enable Cpu Cache Flush On Halt Function
+ *
+ *    @param[in]       FamilySpecificServices   The current Family Specific Services.
+ *    @param[in]       EntryPoint               Timepoint designator.
+ *    @param[in]       PlatformConfig           Contains the runtime modifiable feature input data.
+ *    @param[in]       StdHeader                Config Handle for library, services.
+ */
+VOID
+SetF10CacheFlushOnHaltRegister (
+  IN       CPU_CFOH_FAMILY_SERVICES     *FamilySpecificServices,
+  IN       UINT64                       EntryPoint,
+  IN       PLATFORM_CONFIGURATION       *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS            *StdHeader
+  )
+{
+  UINT32       AndMask;
+  UINT32       OrMask;
+  UINT32     CoreCount;
+  UINT32       CpbControl;
+  CPU_LOGICAL_ID LogicalId;
+  PCI_ADDR     PciAddress;
+  PCI_ADDR     CpbCtrlRegister;
+
+  if ((EntryPoint & (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC)) != 0) {
+    // Initialize F3xDC
+    // bits[25:19] CacheFlushOnHaltTmr = 28h
+    // bits[18:16] CacheFlushOnHaltCtl = 111b
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = CLOCK_POWER_TIMING_CTRL2_REG;
+    AndMask = 0xFC00FFFF;
+    OrMask = 0x01470000;
+
+    GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+    if ((LogicalId.Revision & AMD_F10_C2) != 0) {
+      //For F10_C2 single Core, F3xDC[18:16] = 0
+      GetActiveCoresInCurrentSocket (&CoreCount, StdHeader);
+      if (CoreCount == 1) {
+        OrMask = 0x01400000;
+      }
+    }
+
+    if ((LogicalId.Revision & AMD_F10_PH_ALL) != 0) {
+      // If Revision E and CPB is enabled
+      // F3xDC[25:19] CacheFlushOnHaltTmr = Ch
+      CpbCtrlRegister.AddressValue = CPB_CTRL_PCI_ADDR;
+      LibAmdPciRead (AccessWidth32, CpbCtrlRegister, &CpbControl, StdHeader);
+
+      if (((CPB_CTRL_REGISTER *) (&CpbControl))->BoostSrc == 3) {
+        OrMask = 0x00670000;
+      }
+    }
+
+    IDS_OPTION_HOOK (IDS_CACHE_FLUSH_HLT, &OrMask, StdHeader);
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); //F3xDC
+  }
+}
+
+CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F10CacheFlushOnHalt =
+{
+  0,
+  SetF10CacheFlushOnHaltRegister
+};
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Cpb.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Cpb.c
new file mode 100644
index 0000000000..f329b9b1a8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Cpb.c
@@ -0,0 +1,169 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 CPB Initialization
+ *
+ * Enables core performance boost.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuFeatures.h"
+#include "cpuRegisters.h"
+#include "cpuF10Utilities.h"
+#include "cpuCpb.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10CPB_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * BSC entry point for checking whether or not CPB is supported.
+ *
+ * @param[in]  CpbServices             The current CPU's family services.
+ * @param[in]  PlatformConfig          Contains the runtime modifiable feature input data.
+ * @param[in]  Socket                  Zero based socket number to check.
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ * @retval     TRUE                    CPB is supported.
+ * @retval     FALSE                   CPB is not supported.
+ *
+ */
+BOOLEAN
+STATIC
+F10IsCpbSupported (
+  IN       CPB_FAMILY_SERVICES    *CpbServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       UINT32                 Socket,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT8        NumBoostStates;
+
+  NumBoostStates = F10GetNumberOfBoostedPstatesOnCore (StdHeader);
+  return (BOOLEAN) (NumBoostStates != 0);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * BSC entry point for for enabling Core Performance Boost.
+ *
+ * Set up F4x15C[BoostSrc] and start the PDMs according to the BKDG.
+ *
+ * @param[in]  CpbServices             The current CPU's family services.
+ * @param[in]  PlatformConfig          Contains the runtime modifiable feature input data.
+ * @param[in]  EntryPoint              Current CPU feature dispatch point.
+ * @param[in]  Socket                  Zero based socket number to check.
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ * @retval     AGESA_SUCCESS           Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F10InitializeCpb (
+  IN       CPB_FAMILY_SERVICES    *CpbServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       UINT64                 EntryPoint,
+  IN       UINT32                 Socket,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       CpbControl;
+  UINT32       Module;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredSts;
+
+  if ((EntryPoint & CPU_FEAT_BEFORE_PM_INIT) != 0) {
+    for (Module = 0; Module < (UINT8)GetPlatformNumberOfModules (); Module++) {
+      GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+      PciAddress.Address.Function = FUNC_4;
+      PciAddress.Address.Register = CPB_CTRL_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+      ((CPB_CTRL_REGISTER *) (&CpbControl))->BoostSrc = 3;
+      IDS_OPTION_HOOK (IDS_CPB_CTRL, &CpbControl, StdHeader);
+      LibAmdPciWrite (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = POPUP_PSTATE_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+      ((POPUP_PSTATE_REGISTER *) (&CpbControl))->CacheFlushPopDownEn = 1;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+    }
+  }
+  return AGESA_SUCCESS;
+}
+
+CONST CPB_FAMILY_SERVICES ROMDATA F10CpbSupport =
+{
+  0,
+  F10IsCpbSupported,
+  F10InitializeCpb
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Dmi.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Dmi.c
new file mode 100644
index 0000000000..641b7e7fe3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Dmi.c
@@ -0,0 +1,519 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD DMI Record Creation API, and related functions.
+ *
+ * Contains code that produce the DMI related information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 58105 $   @e \$Date: 2011-08-19 17:46:09 -0600 (Fri, 19 Aug 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuLateInit.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuF10Utilities.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10DMI_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE            PstateFamilyServiceTable;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+DmiF10GetInfo (
+  IN OUT   CPU_TYPE_INFO *CpuInfoPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+UINT8
+DmiF10GetVoltage (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+UINT16
+DmiF10GetMaxSpeed (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+UINT16
+DmiF10GetExtClock (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+DmiF10GetMemInfo (
+  IN OUT   CPU_GET_MEM_INFO  *CpuGetMemInfoPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+STATIC
+F10Translate7BitVidTo6Bit (
+  IN OUT   UINT8 * MaxVidPtr
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DmiF10GetInfo
+ *
+ *    Get CPU type information
+ *
+ *    @param[in,out]  CpuInfoPtr     Pointer to CPU_TYPE_INFO struct.
+ *    @param[in]      StdHeader      Standard Head Pointer
+ *
+ */
+VOID
+DmiF10GetInfo (
+  IN OUT   CPU_TYPE_INFO *CpuInfoPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  CPUID_DATA CpuId;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  LibAmdCpuidRead (AMD_CPUID_FMF, &CpuId, StdHeader);
+  CpuInfoPtr->ExtendedFamily = (UINT8) (CpuId.EAX_Reg >> 20) & 0xFF; // bit 27:20
+  CpuInfoPtr->ExtendedModel = (UINT8) (CpuId.EAX_Reg >> 16) & 0xF; // bit 19:16
+  CpuInfoPtr->BaseFamily = (UINT8) (CpuId.EAX_Reg >> 8) & 0xF; // bit 11:8
+  CpuInfoPtr->BaseModel = (UINT8) (CpuId.EAX_Reg >> 4)  & 0xF; // bit 7:4
+  CpuInfoPtr->Stepping = (UINT8) (CpuId.EAX_Reg & 0xF); // bit 3:0
+
+  CpuInfoPtr->PackageType = (UINT8) (CpuId.EBX_Reg >> 28) & 0xF; // bit 31:28
+  CpuInfoPtr->BrandId.Pg = (UINT8) (CpuId.EBX_Reg >> 15) & 0x1; // bit 15
+  CpuInfoPtr->BrandId.String1 = (UINT8) (CpuId.EBX_Reg >> 11) & 0xF; // bit 14:11
+  CpuInfoPtr->BrandId.Model = (UINT8) (CpuId.EBX_Reg >> 4) & 0x7F; // bit 10:4
+  CpuInfoPtr->BrandId.String2 = (UINT8) (CpuId.EBX_Reg & 0xF); // bit 3:0
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  CpuInfoPtr->TotalCoreNumber = FamilySpecificServices->GetNumberOfPhysicalCores (FamilySpecificServices, StdHeader);
+  CpuInfoPtr->TotalCoreNumber--;
+
+  LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuId, StdHeader);
+  CpuInfoPtr->EnabledCoreNumber = (UINT8) (CpuId.ECX_Reg & 0xFF); // bit 7:0
+
+  switch (CpuInfoPtr->PackageType) {
+  case DR_SOCKET_1207:
+    CpuInfoPtr->ProcUpgrade = P_UPGRADE_F1207;
+    break;
+  case DR_SOCKET_AM3:
+    CpuInfoPtr->ProcUpgrade = P_UPGRADE_AM3;
+    break;
+  case DR_SOCKET_S1G3:
+    CpuInfoPtr->ProcUpgrade = P_UPGRADE_S1GX;
+    break;
+  case DR_SOCKET_G34:
+    CpuInfoPtr->ProcUpgrade = P_UPGRADE_G34;
+    break;
+  case DR_SOCKET_ASB2:
+    CpuInfoPtr->ProcUpgrade = P_UPGRADE_NONE;
+    break;
+  case DR_SOCKET_C32:
+    CpuInfoPtr->ProcUpgrade = P_UPGRADE_C32;
+    break;
+  default:
+    CpuInfoPtr->ProcUpgrade = P_UPGRADE_UNKNOWN;
+    break;
+  }
+
+  LibAmdCpuidRead (AMD_CPUID_TLB_L1Cache, &CpuId, StdHeader);
+  CpuInfoPtr->L1CacheSize = (UINT32) (((UINT8) (CpuId.ECX_Reg >> 24) + (UINT8) (CpuId.EDX_Reg >> 24)) * (CpuInfoPtr->EnabledCoreNumber + 1));
+
+  LibAmdCpuidRead (AMD_CPUID_L2L3Cache_L2TLB, &CpuId, StdHeader);
+  CpuInfoPtr->L2CacheSize = (UINT32) ((UINT16) (CpuId.ECX_Reg >> 16) * (CpuInfoPtr->EnabledCoreNumber + 1));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DmiF10GetVoltage
+ *
+ *    Get the voltage value according to SMBIOS SPEC's requirement.
+ *
+ *    @param[in]      StdHeader      Standard Head Pointer
+ *
+ *    @retval  Voltage   - CPU Voltage.
+ *
+ */
+UINT8
+DmiF10GetVoltage (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT8     MaxVid;
+  UINT8     Voltage;
+  UINT8     NumberBoostStates;
+  UINT32    Pvimode;
+  UINT32    CurrentNodeNum;
+  UINT64    MsrData;
+  PCI_ADDR  TempAddr;
+  CPU_LOGICAL_ID    CpuFamilyRevision;
+  CPB_CTRL_REGISTER CpbCtrl;
+
+  // Voltage = 0x80 + (voltage at boot time * 10)
+  GetCurrentNodeNum (&CurrentNodeNum, StdHeader);
+  TempAddr.AddressValue = MAKE_SBDFO (0, 0, (24 + CurrentNodeNum), FUNC_3, PW_CTL_MISC_REG);
+  LibAmdPciReadBits (TempAddr, 8, 8, &Pvimode, (VOID *)StdHeader);
+  //Pvimode is a 1-bit register field:  1-PVI 0-SVI
+
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  if ((CpuFamilyRevision.Revision & AMD_F10_PH_ALL) != 0) {
+    TempAddr.AddressValue = MAKE_SBDFO (0, 0, (24 + CurrentNodeNum), FUNC_4, CPB_CTRL_REG);
+    LibAmdPciRead (AccessWidth32, TempAddr, &CpbCtrl, StdHeader);  // F4x15C
+    NumberBoostStates = (UINT8) CpbCtrl.NumBoostStates;
+  } else {
+    NumberBoostStates = 0;
+  }
+
+  LibAmdMsrRead ((MSR_PSTATE_0 + NumberBoostStates), &MsrData, StdHeader);
+  MaxVid = (UINT8) (((PSTATE_MSR *)&MsrData)->CpuVid);
+
+  if (Pvimode) {
+    // PVI mode
+    F10Translate7BitVidTo6Bit (&MaxVid);
+    if (MaxVid >= 0x20) {
+      Voltage = (UINT8) ((7625 - (125 * (MaxVid - 0x20)) + 500) / 1000);
+    } else {
+      Voltage = (UINT8) ((1550 - (25 * MaxVid) + 50) / 100);
+    }
+  } else {
+    // is SVI mode
+    if ((MaxVid >= 0x7C) && (MaxVid <= 0x7F)) {
+      Voltage = 0;
+    } else {
+      Voltage = (UINT8) ((15500 - (125 * MaxVid) + 500) / 1000);
+    }
+  }
+
+  Voltage += 0x80;
+  return (Voltage);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DmiF10GetMaxSpeed
+ *
+ *    Get the Max Speed
+ *
+ *    @param[in]      StdHeader      Standard Head Pointer
+ *
+ *    @retval  MaxSpeed   - CPU Max Speed.
+ *
+ */
+UINT16
+DmiF10GetMaxSpeed (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT8 NumBoostStates;
+  UINT32 P0Frequency;
+  PSTATE_CPU_FAMILY_SERVICES  *FamilyServices;
+
+  FamilyServices = NULL;
+  GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  ASSERT (FamilyServices != NULL);
+  NumBoostStates = F10GetNumberOfBoostedPstatesOnCore (StdHeader);
+
+  FamilyServices->GetPstateFrequency (FamilyServices, NumBoostStates, &P0Frequency, StdHeader);
+  return ((UINT16) P0Frequency);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DmiF10GetExtClock
+ *
+ *    Get the external clock Speed
+ *
+ *    @param[in]      StdHeader      Standard Head Pointer
+ *
+ *    @retval  ExtClock   - CPU external clock Speed.
+ *
+ */
+UINT16
+DmiF10GetExtClock (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  return (EXTERNAL_CLOCK_DFLT);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DmiF10GetMemInfo
+ *
+ *    Get memory information.
+ *
+ *    @param[in,out]  CpuGetMemInfoPtr      Pointer to CPU_GET_MEM_INFO struct.
+ *    @param[in]      StdHeader             Standard Head Pointer
+ *
+ */
+VOID
+DmiF10GetMemInfo (
+  IN OUT   CPU_GET_MEM_INFO  *CpuGetMemInfoPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32 PciData;
+  PCI_ADDR PciAddress;
+
+  CpuGetMemInfoPtr->EccCapable = FALSE;
+
+  // DCT 0
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_2, 0x90);
+  LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+  // Check if F2x90[DimmEccEn] is set
+  if ((PciData & 0x00080000) != 0) {
+    CpuGetMemInfoPtr->EccCapable = TRUE;
+  } else {
+    // DCT 1
+    PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_2, 0x190);
+    LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+    // Check if F2x190[DimmEccEn] is set
+    if ((PciData & 0x00080000) != 0) {
+      CpuGetMemInfoPtr->EccCapable = TRUE;
+    }
+  }
+
+  // Partition Row Position - 0 is for dual channel memory
+  CpuGetMemInfoPtr->PartitionRowPosition = 0;
+}
+
+/*---------------------------------------------------------------------------------------
+ * Processor Family Table
+ *
+ * Note: 'x' means we don't care this field
+ *       002h = "Unknown"
+ *       038h = "AMD Turion(TM) II Ultra Dual-Core Mobile M Processor Family"
+ *       039h = "AMD Turion(TM) II Dual-Core Mobile M Processor Family"
+ *       03Ah = "AMD Athlon(TM) II Dual-Core M Processor Family"
+ *       083h = "AMD Athlon(tm) 64 Processor Family"
+ *       084h = "AMD Opteron(TM) Processor Family"
+ *       085h = "AMD Sempron(tm) Processor Family"
+ *       087h = "Dual-Core AMD Opteron Processor Family"
+ *       08Ah = "Quad-Core AMD Opteron Processor Family"
+ *       08Ch = "AMD Phenom FX Quad-Core Processor Family"
+ *       08Dh = "AMD Phenom X4 Quad-Core Processor Family"
+ *       08Eh = "AMD Phenom X2 Dual-Core Processor Family"
+ *       08Fh = "AMD Athlon X2 Dual-Core Processor Family"
+ *       0E6h = "Embedded AMD Opteron Processor Family"
+ *       0E7h = "AMD Phenom Triple-Core Processor Family"
+ *       0ECh = "AMD Phenom(TM) II Processor Family"
+ *       0EDh = "AMD Athlon(TM) II Processor Family"
+ *       0EEh = "Six-Core AMD Opteron(TM) Processor Family"
+ *       0EFh = "AMD Sempron(TM) M Processor Family"
+ *-------------------------------------------------------------------------------------*/
+CONST DMI_BRAND_ENTRY ROMDATA Family10BrandList[] =
+{
+  // Brand --> DMI ID translation table
+  // PackageType, PgOfBrandId, NumberOfCores, String1ofBrandId, ValueSetToDmiTable
+  // {'x', 'x', 'x', 'x', 0x02} MUST be the last one.
+    {0, 0, 1, 0, 0x87},
+    {0, 0, 1, 1, 0x87},
+    {0, 0, 2, 0, 0xE6},
+    {0, 0, 3, 0, 0x8A},
+    {0, 0, 3, 1, 0x8A},
+    {0, 0, 3, 2, 0xE6},
+    {0, 0, 3, 3, 0xE6},
+    {0, 0, 3, 4, 0xE6},
+    {0, 0, 3, 5, 0x8C},
+    {0, 0, 5, 0, 0xEE},
+    {0, 0, 5, 1, 0xEE},
+    {0, 1, 3, 1, 0xE6},
+    {0, 1, 5, 1, 0xE6},
+    {1, 0, 0, 0, 0x83},
+    {1, 0, 0, 1, 0x85},
+    {1, 0, 0, 2, 0x85},
+    {1, 0, 0, 3, 0xED},
+    {1, 0, 1, 0, 0x87},
+    {1, 0, 1, 1, 0x8F},
+    {1, 0, 1, 2, 0xED},
+    {1, 0, 1, 3, 0xED},
+    {1, 0, 1, 4, 0xED},
+    {1, 0, 1, 5, 0xED},
+    {1, 0, 1, 6, 0xED},
+    {1, 0, 1, 7, 0xEC},
+    {1, 0, 1, 8, 0xED},
+    {1, 0, 1, 9, 0xED},
+    {1, 0, 1, 0xA, 0xEC},
+    {1, 0, 1, 0xB, 0xEC},
+    {1, 0, 1, 0xC, 0x85},
+    {1, 0, 2, 0, 0xE7},
+    {1, 0, 2, 1, 0xEC},
+    {1, 0, 2, 2, 0xEC},
+    {1, 0, 2, 3, 0xEC},
+    {1, 0, 2, 4, 0xEC},
+    {1, 0, 2, 5, 0xED},
+    {1, 0, 2, 6, 0xED},
+    {1, 0, 2, 7, 0xED},
+    {1, 0, 2, 8, 0xEC},
+    {1, 0, 2, 9, 0xED},
+    {1, 0, 2, 0xA, 0xED},
+    {1, 0, 3, 0, 0x8A},
+    {1, 0, 3, 1, 0x8C},
+    {1, 0, 3, 2, 0x8D},
+    {1, 0, 3, 3, 0xEC},
+    {1, 0, 3, 4, 0xEC},
+    {1, 0, 3, 5, 0xEC},
+    {1, 0, 3, 6, 0xEC},
+    {1, 0, 3, 7, 0xEC},
+    {1, 0, 3, 8, 0xEC},
+    {1, 0, 3, 9, 0xEC},
+    {1, 0, 3, 0xA, 0xED},
+    {1, 0, 3, 0xB, 0xED},
+    {1, 0, 3, 0xC, 0xED},
+    {1, 0, 3, 0xD, 0xED},
+    {1, 0, 3, 0xE, 0xEC},
+    {1, 0, 3, 0xF, 0xED},
+    {1, 0, 5, 0, 0xEC},
+    {1, 1, 1, 1, 0xED},
+    {1, 1, 1, 2, 0xED},
+    {1, 1, 3, 0, 0xEC},
+    {1, 1, 3, 1, 0xEC},
+    {1, 1, 3, 2, 0xEC},
+    {1, 1, 3, 3, 0xEC},
+    {1, 1, 3, 4, 0xEC},
+    {2, 0, 0, 0, 0xEF},
+    {2, 0, 0, 1, 0xEF},
+    {2, 0, 1, 0, 0x38},
+    {2, 0, 1, 1, 0x39},
+    {2, 0, 1, 2, 0x3A},
+    {2, 0, 1, 3, 0x39},
+    {2, 0, 1, 4, 0xED},
+    {2, 0, 1, 5, 0xEC},
+    {2, 0, 1, 6, 0xEC},
+    {2, 0, 1, 7, 0x39},
+    {2, 0, 1, 8, 0xED},
+    {2, 0, 1, 9, 0xEC},
+    {2, 0, 2, 2, 0xEC},
+    {2, 0, 2, 3, 0xEC},
+    {2, 0, 2, 4, 0xEC},
+    {2, 0, 3, 1, 0xEC},
+    {2, 0, 3, 2, 0xEC},
+    {2, 0, 3, 3, 0xEC},
+    {3, 0, 7, 0, 0x84},
+    {3, 0, 0xB, 0, 0x84},
+    {3, 1, 7, 1, 0xE6},
+    {4, 0, 0, 1, 0xED},
+    {4, 0, 0, 2, 0xEF},
+    {4, 0, 0, 3, 0xED},
+    {4, 0, 1, 1, 0x39},
+    {4, 0, 1, 2, 0x3A},
+    {4, 0, 1, 3, 0xEF},
+    {4, 0, 1, 4, 0x39},
+    {4, 0, 1, 5, 0x3A},
+    {5, 0, 3, 0, 0x84},
+    {5, 0, 5, 0, 0x84},
+    {5, 1, 3, 1, 0xE6},
+    {5, 1, 5, 1, 0xE6},
+    {'x', 'x', 'x', 'x', P_FAMILY_UNKNOWN}
+  };
+
+CONST PROC_FAMILY_TABLE ROMDATA ProcFamily10DmiTable =
+{
+// This table is for Processor family 10h
+  AMD_FAMILY_10,                  // ID for Family 10h
+  DmiF10GetInfo,                  // Transfer vectors for family
+  DmiGetT4ProcFamilyFromBrandId,  // Get type 4 processor family information from CPUID_8000_0001_EBX[BrandId]
+  DmiF10GetVoltage,               //   specific routines (above)
+  DmiF10GetMaxSpeed,
+  DmiF10GetExtClock,
+  DmiF10GetMemInfo,               // Get memory information
+  (sizeof (Family10BrandList) / sizeof (Family10BrandList[0])), // Number of entries in following table
+  &Family10BrandList[0]
+};
+
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  F10Translate7BitVidTo6Bit
+ *
+ *    translate 7 bit VID to 6 bit VID
+ *
+ *    @param[in, out]  MaxVidPtr   - Pointer to MaxVid.
+ */
+VOID
+STATIC
+F10Translate7BitVidTo6Bit (
+  IN OUT   UINT8 * MaxVidPtr
+  )
+{
+  if ((*MaxVidPtr >= 0x5E) && (*MaxVidPtr <= 0x7F)) {
+    *MaxVidPtr = 0x3F;
+  } else if ((*MaxVidPtr >= 0x3F) && (*MaxVidPtr <= 0x5D)) {
+    *MaxVidPtr = *MaxVidPtr - 0x1F;
+  } else if (*MaxVidPtr <= 0x3E) {
+    *MaxVidPtr = (*MaxVidPtr & 0x7E) >> 1;
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10EarlyInit.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10EarlyInit.c
new file mode 100644
index 0000000000..c7fb857e71
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10EarlyInit.c
@@ -0,0 +1,454 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 after warm reset sequence
+ *
+ * Performs the "CPU Core Minimum P-State Transition Sequence After Warm Reset"
+ * as described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF10Utilities.h"
+#include "cpuF10EarlyInit.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10EARLYINIT_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/// Enum for handling code branching while transitioning to the
+/// minimum P-state after a warm reset
+typedef enum {
+  EXIT_SEQUENCE,        ///< Exit the sequence
+  STEP7,                ///< Go to step 7
+  STEP17,               ///< Go to step 17
+  STEP20                ///< Go to step 20
+} GO_TO_STEP;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F10PmVoltageAlignmentAfterResetCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+F10PmAfterResetCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+WaitForCpuFidAndDidToMatch (
+  IN       UINT32             PstateNumber,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 10h core 0 entry point for performing the necessary steps after
+ * a warm reset has occurred.
+ *
+ * The steps are as follows:
+ *    1. Modify F3xDC[PstateMaxVal] to reflect the lowest performance P-state
+ *       supported, as indicated in MSRC001_00[68:64][PstateEn]
+ *    2. If MSRC001_0071[CurNbDid] = 0, set MSRC001_001F[GfxNbPstateDis]
+ *    3. If MSRC001_0071[CurPstate] != F3xDC[PstateMaxVal], go to step 20
+ *    4. If F3xDC[PstateMaxVal] = 0 or F3xDC[PstateMaxVal] != 4, go to step 7
+ *    5. If MSRC001_0061[CurPstateLimit] <= F3xDC[PstateMaxVal]-1, go to step 17
+ *    6. Exit the sequence
+ *    7. Copy the P-state register pointed to by F3xDC[PstateMaxVal] to the P-state
+ *       register pointed to by F3xDC[PstateMaxVal]+1
+ *    8. Write F3xDC[PstateMaxVal]+1 to F3xDC[PstateMaxVal]
+ *    9. Write (the new) F3xDC[PstateMaxVal] to MSRC001_0062[PstateCmd]
+ *   10. Wait for MSRC001_0071[CurCpuFid/CurCpuDid] = CpuFid/CpuDid from the P-state
+ *       register pointed to by (the new) F3xDC[PstateMaxVal]
+ *   11. Copy (the new) F3xDC[PstateMaxVal]-1 to MSRC001_0062[PstateCmd]
+ *   12. Wait for MSRC001_0071[CurCpuFid/CurCpuDid] = CpuFid/CpuDid from the P-state
+ *       register pointed to by (the new) F3xDC[PstateMaxVal]-1
+ *   13. If MSRC001_0071[CurNbDid] = 1, set MSRC001_001F[GfxNbPstateDis]
+ *   14. If required, transition the NB COF and VID to the NbDid and NbVid from the
+ *       P-state register pointed to by MSRC001_0061[CurPstateLimit] using the NB COF
+ *       and VID transition sequence after a warm reset
+ *   15. Write MSRC001_00[68:64][PstateEn]=0 for the P-state pointed to by F3xDC[PstateMaxVal]
+ *   16. Write (the new) F3xDC[PstateMaxVal]-1 to F3xDC[PstateMaxVal] and exit the sequence
+ *   17. Copy MSRC001_0061[PstateMaxVal] - 1 to MSRC001_0062[PstateCmd]
+ *   18. Wait for MSRC001_0071[CurCpuFid/CurCpuDid] = CpuFid/CpuDid from the P-state
+ *       register pointed to by F3xDC[PstateMaxVal]-1
+ *   19. If MSRC001_0071[CurNbDid] = 0, set MSRC001_001F[GfxNbPstateDis]
+ *   20. Copy MSRC001_0061[PstateMaxVal] to MSRC001_0062[PstateCmd]
+ *   21. Wait for MSRC001_0071[CurCpuFid/CurCpuDid] = CpuFid/CpuDid from the P-state
+ *       register pointed to by F3xDC[PstateMaxVal]
+ *   22. If MSRC001_0071[CurNbDid] = 1, set MSRC001_001F[GfxNbPstateDis]
+ *   23. Issue an LDTSTOP assertion in the IO hub and exit sequence
+ *   24. If required, transition the NB COF and VID to the NbDid and NbVid from the
+ *       P-state register pointed to by F3xDC[PstateMaxVal] using the NB COF and VID
+ *       transition sequence after a warm reset
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParamsPtr       Service parameters
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F10PmAfterReset (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT32    PsMaxVal;
+  UINT32    MsrAddr;
+  UINT32    Core;
+  UINT32    AndMask;
+  UINT32    OrMask;
+  UINT32    CpbNum;
+  UINT64    LocalMsrRegister;
+  UINT64    CurrentStatus;
+  UINT64    TargetPsMsr;
+  PCI_ADDR  PciAddress;
+  AP_TASK   TaskPtr;
+
+  GetCurrentCore (&Core, StdHeader);
+  ASSERT (Core == 0);
+
+  // Core P-State Voltage Alignment After Warm Reset
+  CpbNum = F10GetNumberOfBoostedPstatesOnCore (StdHeader);
+  if (CpbNum == 1) {
+    // Step 1 Write MSRC001_0063[ CurPstate] to MSRC001_0062[ PstateCmd] on every core in the processor.
+    TaskPtr.FuncAddress.PfApTask = F10PmVoltageAlignmentAfterResetCore;
+    TaskPtr.DataTransfer.DataSizeInDwords = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+
+    // Step 2 Wait for MSRC001_0071[ CurCpuVid] >= [CpuVid] from MSRC001_00[ 68:64] indexed by 4x15C[ NumBoost States]
+    // Get target P-state indexed by F4x15C[NumBoostStates]
+    LibAmdMsrRead ((MSR_PSTATE_0 + CpbNum), &TargetPsMsr, StdHeader);
+    do {
+      LibAmdMsrRead (MSR_COFVID_STS, &CurrentStatus, StdHeader);
+    } while (((COFVID_STS_MSR *) &CurrentStatus)->CurCpuVid < ((PSTATE_MSR *) &TargetPsMsr)->CpuVid);
+  }
+
+  // Core Minimum P-State Transition Sequence After Warm Reset
+  // Step 1 Modify F3xDC[PstateMaxVal] to reflect the lowest performance
+  //        P-state supported, as indicated in MSRC001_00[68:64][PstateEn]
+  for (MsrAddr = PS_MAX_REG; MsrAddr > PS_REG_BASE; --MsrAddr) {
+    LibAmdMsrRead (MsrAddr, &LocalMsrRegister, StdHeader);
+    if (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1) {
+      break;
+    }
+  }
+  PsMaxVal = MsrAddr - PS_REG_BASE;
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = CPTC2_REG;
+  AndMask = 0xFFFFFFFF;
+  OrMask = 0x00000000;
+  ((CLK_PWR_TIMING_CTRL2_REGISTER *) &AndMask)->PstateMaxVal = 0;
+  ((CLK_PWR_TIMING_CTRL2_REGISTER *) &OrMask)->PstateMaxVal = PsMaxVal;
+  OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+
+  // Launch each local core to perform the remaining steps.
+  TaskPtr.FuncAddress.PfApTask = F10PmAfterResetCore;
+  TaskPtr.DataTransfer.DataSizeInDwords = 0;
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+  ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+}
+
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F10PmAfterReset to perform MSR initialization on all
+ * cores of a family 10h socket.
+ *
+ * This function implements steps 2 - 24 on each core.
+ *
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F10PmAfterResetCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 PsMaxVal;
+  UINT32 SwPsMaxVal;
+  UINT32 LocalPciRegister;
+  UINT64 LocalMsrRegister;
+  UINT64 SavedMsr;
+  UINT64 CurrentLimitMsr;
+  PCI_ADDR PciAddress;
+  GO_TO_STEP GoToStep;
+  CPU_LOGICAL_ID LogicalId;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  // Step 2 If MSR C001_0071[CurNbDid] = 0, set MSR C001_001F[GfxNbPstateDis]
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+  GetCpuServicesFromLogicalId (&LogicalId, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  if ((LogicalId.Revision & (AMD_F10_C3 | AMD_F10_DA_C2)) != 0) {
+    LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+    if (((COFVID_STS_MSR *) &LocalMsrRegister)->CurNbDid == 0) {
+      LibAmdMsrRead (NB_CFG, &LocalMsrRegister, StdHeader);
+      LocalMsrRegister |= BIT62;
+      LibAmdMsrWrite (NB_CFG, &LocalMsrRegister, StdHeader);
+    }
+  }
+
+  GoToStep = EXIT_SEQUENCE;
+
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = CPTC2_REG;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  PsMaxVal = ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal;
+
+  LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &CurrentLimitMsr, StdHeader);
+  SwPsMaxVal = (UINT32) (((PSTATE_CURLIM_MSR *) &CurrentLimitMsr)->PstateMaxVal);
+
+  // Step 3 If MSRC001_0071[CurPstate] != F3xDC[PstateMaxVal], go to step 20
+  LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+  if (((COFVID_STS_MSR *) &LocalMsrRegister)->CurPstate != PsMaxVal) {
+    GoToStep = STEP20;
+  } else {
+    // Step 4 If F3xDC[PstateMaxVal] = 0 || F3xDC[PstateMaxVal] != 4, go to step 7
+    if ((PsMaxVal == 0) || (PsMaxVal != 4)) {
+      GoToStep = STEP7;
+    } else {
+      // Step 5 If MSRC001_0061[CurPstateLimit] <= F3xDC[PstateMaxVal]-1, go to step 17
+      if (((PSTATE_CURLIM_MSR *) &CurrentLimitMsr)->CurPstateLimit <= (PsMaxVal - 1)) {
+        GoToStep = STEP17;
+      }
+    }
+  }
+  switch (GoToStep) {
+  default:
+  case EXIT_SEQUENCE:
+    // Step 6 Exit the sequence
+    break;
+  case STEP7:
+    // Workaround for S3 ----Save the value of [The PState[4:0] Registers] MSRC001_00[68:64]
+    //                      pointed to by F3xDC[PstateMaxVal] + 1
+    LibAmdMsrRead ((MSR_PSTATE_0 + (PsMaxVal + 1)), &SavedMsr, StdHeader);
+
+    // Step 7 Copy the P-state register pointed to by F3xDC[PstateMaxVal] to the P-state
+    //        register pointed to by F3xDC[PstateMaxVal]+1
+    LibAmdMsrRead ((MSR_PSTATE_0 + PsMaxVal), &LocalMsrRegister, StdHeader);
+    LibAmdMsrWrite ((MSR_PSTATE_0 + (PsMaxVal + 1)), &LocalMsrRegister, StdHeader);
+
+    // Step 8 Write F3xDC[PstateMaxVal]+1 to F3xDC[PstateMaxVal]
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = CPTC2_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal = PsMaxVal + 1;
+    LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+    // Step 9 Write (the new) F3xDC[PstateMaxVal] to MSRC001_0062[PstateCmd]
+    FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) (PsMaxVal + 1), (BOOLEAN) FALSE, StdHeader);
+
+    // Step 10 Wait for MSRC001_0071[CurCpuFid/CurCpuDid] = CpuFid/CpuDid from the P-state
+    //         register pointed to by (the new) F3xDC[PstateMaxVal]
+    WaitForCpuFidAndDidToMatch ((UINT32) (PsMaxVal + 1), StdHeader);
+
+    // Step 11 Copy (the new) F3xDC[PstateMaxVal]-1 to MSRC001_0062[PstateCmd]
+    FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) PsMaxVal, (BOOLEAN) FALSE, StdHeader);
+
+    // Step 12 Wait for MSRC001_0071[CurCpuFid/CurCpuDid] = CpuFid/CpuDid from the P-state
+    //         register pointed to by (the new) F3xDC[PstateMaxVal]-1
+    WaitForCpuFidAndDidToMatch (PsMaxVal, StdHeader);
+
+    // Step 13 If MSRC001_0071[CurNbDid] = 1, set MSRC001_001F[GfxNbPstateDis]
+    if ((LogicalId.Revision & (AMD_F10_C3 | AMD_F10_DA_C2)) != 0) {
+      LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+      if (((COFVID_STS_MSR *) &LocalMsrRegister)->CurNbDid == 1) {
+        LibAmdMsrRead (NB_CFG, &LocalMsrRegister, StdHeader);
+        LocalMsrRegister |= BIT62;
+        LibAmdMsrWrite (NB_CFG, &LocalMsrRegister, StdHeader);
+      }
+    }
+
+    // Step 14 If required, transition the NB COF and VID to the NbDid and NbVid from the
+    //         P-state register pointed to by MSRC001_0061[CurPstateLimit] using the NB COF
+    //         and VID transition sequence after a warm reset
+
+    // Step 15 Write 0 to PstateEn of the P-state register pointed to by (the new) F3xDC[PstateMaxVal]
+    // Workaround for S3----Restore the value of [The PState[4:0] Registers] MSRC001_00[68:64]
+    //                   pointed to by F3xDC[PstateMaxVal] + 1
+    ((PSTATE_MSR *) &SavedMsr)->PsEnable = 0;
+    LibAmdMsrWrite ((MSR_PSTATE_0 + (PsMaxVal + 1)), &SavedMsr, StdHeader);
+
+    // Step 16 Write (the new) F3xDC[PstateMaxVal]-1 to F3xDC[PstateMaxVal]
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal = PsMaxVal;
+    LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    break;
+  case STEP17:
+    // Step 17 Copy MSRC001_0061[PstateMaxVal]-1 to MSRC001_0062[PstateCmd]
+    FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) (SwPsMaxVal - 1), (BOOLEAN) FALSE, StdHeader);
+
+    // Step 18 Wait for MSRC001_0071[CurCpuFid/CurCpuDid] = CpuFid/CpuDid from the P-state
+    //         register pointed to by F3xDC[PstateMaxVal]-1
+    WaitForCpuFidAndDidToMatch ((UINT32) (PsMaxVal - 1), StdHeader);
+
+    // Step 19 If MSR C001_0071[CurNbDid] = 0, set MSR C001_001F[GfxNbPstateDis]
+    if ((LogicalId.Revision & (AMD_F10_C3 | AMD_F10_DA_C2)) != 0) {
+      LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+      if (((COFVID_STS_MSR *) &LocalMsrRegister)->CurNbDid == 0) {
+        LibAmdMsrRead (NB_CFG, &LocalMsrRegister, StdHeader);
+        LocalMsrRegister |= BIT62;
+        LibAmdMsrWrite (NB_CFG, &LocalMsrRegister, StdHeader);
+      }
+    }
+
+    // Fall through from step 19 to step 20
+  case STEP20:
+    // Step 20 Copy MSRC001_0061[PstateMaxVal] to MSRC001_0062[PstateCmd]
+    FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) SwPsMaxVal, (BOOLEAN) FALSE, StdHeader);
+
+    // Step 21 Wait for MSRC001_0071[CurCpuFid/CurCpuDid] = CpuFid/CpuDid from the P-state
+    //         register pointed to by F3xDC[PstateMaxVal]
+    WaitForCpuFidAndDidToMatch (PsMaxVal, StdHeader);
+
+    // Step 22 If MSR C001_0071[CurNbDid] = 1, set MSR C001_001F[GfxNbPstateDis] and exit
+    //         the sequence
+    if ((LogicalId.Revision & (AMD_F10_C3 | AMD_F10_DA_C2)) != 0) {
+      LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+      if (((COFVID_STS_MSR *) &LocalMsrRegister)->CurNbDid == 1) {
+        LibAmdMsrRead (NB_CFG, &LocalMsrRegister, StdHeader);
+        LocalMsrRegister |= BIT62;
+        LibAmdMsrWrite (NB_CFG, &LocalMsrRegister, StdHeader);
+        break;
+      }
+    }
+
+    // Step 23 Issue an LDTSTOP and exit the sequence
+
+    // Step 24 If required, transition the NB COF and VID to the NbDid and NbVid from the
+    //         P-state register pointed to by F3xDC[PstateMaxVal] using the NB COF and VID
+    //         transition sequence after a warm reset
+    break;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F10PmAfterResetCore to wait for Cpu FID and DID to
+ * match a specific P-state.
+ *
+ * This function implements steps 11, 13, 18, and 20 on each core as needed.
+ *
+ * @param[in]  PstateNumber       P-state settings to match
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+WaitForCpuFidAndDidToMatch (
+  IN       UINT32             PstateNumber,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT64  TargetPsMsr;
+  UINT64  CurrentStatus;
+
+  // Get target P-state settings
+  LibAmdMsrRead ((MSR_PSTATE_0 + PstateNumber), &TargetPsMsr, StdHeader);
+
+  // Wait for current CPU FID/DID to match target FID/DID
+  do {
+    LibAmdMsrRead (MSR_COFVID_STS, &CurrentStatus, StdHeader);
+  } while ((((COFVID_STS_MSR *) &CurrentStatus)->CurCpuFid != ((PSTATE_MSR *) &TargetPsMsr)->CpuFid) ||
+           (((COFVID_STS_MSR *) &CurrentStatus)->CurCpuDid != ((PSTATE_MSR *) &TargetPsMsr)->CpuDid));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F10PmAfterReset to Core P-State Voltage Alignment for CPB on all
+ * cores of a family 10h socket.
+ *
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F10PmVoltageAlignmentAfterResetCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 CurrentStatus;
+
+  LibAmdMsrRead (MSR_PSTATE_STS, &CurrentStatus, StdHeader);
+  LibAmdMsrWrite (MSR_PSTATE_CTL, &CurrentStatus, StdHeader);
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10EarlyInit.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10EarlyInit.h
new file mode 100644
index 0000000000..d031620c4a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10EarlyInit.h
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Early Init related functions Prototypes.
+ *
+ * Contains code that provide power management functionality
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F10_EARLY_INIT_H_
+#define _CPU_F10_EARLY_INIT_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F10PmAfterReset (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F10_EARLY_INIT_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10FeatureLeveling.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10FeatureLeveling.c
new file mode 100644
index 0000000000..a282fa69df
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10FeatureLeveling.c
@@ -0,0 +1,393 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 specific feature leveling functions.
+ *
+ * Provides feature leveling functions specific to family 10h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuPostInit.h"
+#include "cpuF10FeatureLeveling.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10FEATURELEVELING_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+cpuFeatureListNeedUpdate (
+  IN       CPU_FEATURES_LIST *globalCpuFeatureList,
+  IN       CPU_FEATURES_LIST *thisCoreCpuFeatureList
+  );
+
+VOID
+STATIC
+updateCpuFeatureList (
+  IN       CPU_FEATURES_LIST *globalCpuFeatureList,
+  IN       CPU_FEATURES_LIST *thisCoreCpuFeatureList
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function get features which CPU supports.
+ *
+ *  @CpuServiceMethod{::F_CPU_SAVE_FEATURES}.
+ *
+ *  Read features from MSR_C0011004 and MSR_C0011005.
+ *
+ *    @param[in]      FamilySpecificServices   - Pointer to CPU_SPECIFIC_SERVICES struct.
+ *    @param[in,out]  cpuFeatureList           - Pointer to CPU_FEATURES_LIST struct.
+ *    @param[in]      StdHeader                - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+F10SaveFeatures (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN OUT   CPU_FEATURES_LIST *cpuFeatureList,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 CpuMsrData;
+  BOOLEAN *FirstTime;
+  BOOLEAN *NeedLeveling;
+  CPU_F10_FEATURES *CpuF10Features;
+  CPU_F10_EXT_FEATURES *CpuF10ExtFeatures;
+  CPU_FEATURES_LIST thisCoreCpuFeatureList;
+
+  FirstTime = (BOOLEAN *) ((UINT8 *) cpuFeatureList + sizeof (CPU_FEATURES_LIST));
+  NeedLeveling = (BOOLEAN *) ((UINT8 *) cpuFeatureList + sizeof (CPU_FEATURES_LIST) + sizeof (BOOLEAN));
+
+  LibAmdMemFill (&thisCoreCpuFeatureList, 0x0, sizeof (CPU_FEATURES_LIST), StdHeader);
+  LibAmdMsrRead (MSR_CPUID_FEATS, &CpuMsrData, StdHeader);
+  CpuF10Features = (CPU_F10_FEATURES *) &CpuMsrData;
+
+  thisCoreCpuFeatureList.APIC = (UINT8) CpuF10Features->CpuF10FeaturesLo.APIC;
+  thisCoreCpuFeatureList.CLFSH = (UINT8) CpuF10Features->CpuF10FeaturesLo.CLFSH;
+  thisCoreCpuFeatureList.CMOV = (UINT8) CpuF10Features->CpuF10FeaturesLo.CMOV;
+  thisCoreCpuFeatureList.CMPXCHG8B = (UINT8) CpuF10Features->CpuF10FeaturesLo.CMPXCHG8B;
+  thisCoreCpuFeatureList.DE = (UINT8) CpuF10Features->CpuF10FeaturesLo.DE;
+  thisCoreCpuFeatureList.FPU = (UINT8) CpuF10Features->CpuF10FeaturesLo.FPU;
+  thisCoreCpuFeatureList.FXSR = (UINT8) CpuF10Features->CpuF10FeaturesLo.FXSR;
+  thisCoreCpuFeatureList.HTT = (UINT8) CpuF10Features->CpuF10FeaturesLo.HTT;
+  thisCoreCpuFeatureList.MCA = (UINT8) CpuF10Features->CpuF10FeaturesLo.MCA;
+  thisCoreCpuFeatureList.MCE = (UINT8) CpuF10Features->CpuF10FeaturesLo.MCE;
+  thisCoreCpuFeatureList.MMX = (UINT8) CpuF10Features->CpuF10FeaturesLo.MMX;
+  thisCoreCpuFeatureList.MSR = (UINT8) CpuF10Features->CpuF10FeaturesLo.MSR;
+  thisCoreCpuFeatureList.MTRR = (UINT8) CpuF10Features->CpuF10FeaturesLo.MTRR;
+  thisCoreCpuFeatureList.PAE = (UINT8) CpuF10Features->CpuF10FeaturesLo.PAE;
+  thisCoreCpuFeatureList.PAT = (UINT8) CpuF10Features->CpuF10FeaturesLo.PAT;
+  thisCoreCpuFeatureList.PGE = (UINT8) CpuF10Features->CpuF10FeaturesLo.PGE;
+  thisCoreCpuFeatureList.PSE = (UINT8) CpuF10Features->CpuF10FeaturesLo.PSE;
+  thisCoreCpuFeatureList.PSE36 = (UINT8) CpuF10Features->CpuF10FeaturesLo.PSE36;
+  thisCoreCpuFeatureList.SSE = (UINT8) CpuF10Features->CpuF10FeaturesLo.SSE;
+  thisCoreCpuFeatureList.SSE2 = (UINT8) CpuF10Features->CpuF10FeaturesLo.SSE2;
+  thisCoreCpuFeatureList.SysEnterSysExit = (UINT8) CpuF10Features->CpuF10FeaturesLo.SysEnterSysExit;
+  thisCoreCpuFeatureList.TimeStampCounter = (UINT8) CpuF10Features->CpuF10FeaturesLo.TimeStampCounter;
+  thisCoreCpuFeatureList.VME = (UINT8) CpuF10Features->CpuF10FeaturesLo.VME;
+
+  thisCoreCpuFeatureList.CMPXCHG16B = (UINT8) CpuF10Features->CpuF10FeaturesHi.CMPXCHG16B;
+  thisCoreCpuFeatureList.Monitor = (UINT8) CpuF10Features->CpuF10FeaturesHi.Monitor;
+  thisCoreCpuFeatureList.POPCNT = (UINT8) CpuF10Features->CpuF10FeaturesHi.POPCNT;
+  thisCoreCpuFeatureList.SSE3 = (UINT8) CpuF10Features->CpuF10FeaturesHi.SSE3;
+
+  LibAmdMsrRead (MSR_CPUID_EXT_FEATS, &CpuMsrData, StdHeader);
+  CpuF10ExtFeatures = (CPU_F10_EXT_FEATURES *) &CpuMsrData;
+
+  thisCoreCpuFeatureList.ThreeDNow = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.ThreeDNow;
+  thisCoreCpuFeatureList.ThreeDNowExt = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.ThreeDNowExt;
+  thisCoreCpuFeatureList.APIC = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.APIC;
+  thisCoreCpuFeatureList.CMOV = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.CMOV;
+  thisCoreCpuFeatureList.CMPXCHG8B = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.CMPXCHG8B;
+  thisCoreCpuFeatureList.DE = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.DE;
+  thisCoreCpuFeatureList.FFXSR = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.FFXSR;
+  thisCoreCpuFeatureList.FPU = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.FPU;
+  thisCoreCpuFeatureList.FXSR = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.FXSR;
+  thisCoreCpuFeatureList.LM = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.LM;
+  thisCoreCpuFeatureList.MCA = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MCA;
+  thisCoreCpuFeatureList.MCE = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MCE;
+  thisCoreCpuFeatureList.MMX = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MMX;
+  thisCoreCpuFeatureList.MmxExt = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MmxExt;
+  thisCoreCpuFeatureList.MSR = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MSR;
+  thisCoreCpuFeatureList.MTRR = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MTRR;
+  thisCoreCpuFeatureList.NX = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.NX;
+  thisCoreCpuFeatureList.PAE = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.PAE;
+  thisCoreCpuFeatureList.Page1GB = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.Page1GB;
+  thisCoreCpuFeatureList.PAT = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.PAT;
+  thisCoreCpuFeatureList.PGE = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.PGE;
+  thisCoreCpuFeatureList.PSE = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.PSE;
+  thisCoreCpuFeatureList.PSE36 = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.PSE36;
+  thisCoreCpuFeatureList.RDTSCP = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.RDTSCP;
+  thisCoreCpuFeatureList.SysCallSysRet = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.SysCallSysRet;
+  thisCoreCpuFeatureList.TimeStampCounter = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.TimeStampCounter;
+  thisCoreCpuFeatureList.VME = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesLo.VME;
+
+  thisCoreCpuFeatureList.ThreeDNowPrefetch = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.ThreeDNowPrefetch;
+  thisCoreCpuFeatureList.ABM = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.ABM;
+  thisCoreCpuFeatureList.AltMovCr8 = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.AltMovCr8;
+  thisCoreCpuFeatureList.CmpLegacy = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.CmpLegacy;
+  thisCoreCpuFeatureList.ExtApicSpace = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.ExtApicSpace;
+  thisCoreCpuFeatureList.IBS = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.IBS;
+  thisCoreCpuFeatureList.LahfSahf = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.LahfSahf;
+  thisCoreCpuFeatureList.MisAlignSse = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.MisAlignSse;
+  thisCoreCpuFeatureList.OSVW = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.OSVM;
+  thisCoreCpuFeatureList.SKINIT = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.SKINIT;
+  thisCoreCpuFeatureList.SSE4A = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.SSE4A;
+  thisCoreCpuFeatureList.SVM = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.SVM;
+  thisCoreCpuFeatureList.WDT = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.WDT;
+  thisCoreCpuFeatureList.NodeId = (UINT8) CpuF10ExtFeatures->CpuF10ExtFeaturesHi.NodeId;
+
+  if (*FirstTime) {
+    updateCpuFeatureList (cpuFeatureList, &thisCoreCpuFeatureList);
+    *FirstTime = FALSE;
+  } else if (cpuFeatureListNeedUpdate (cpuFeatureList, &thisCoreCpuFeatureList)) {
+    updateCpuFeatureList (cpuFeatureList, &thisCoreCpuFeatureList);
+    *NeedLeveling = TRUE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function set features which All CPUs support.
+ *
+ *  @CpuServiceMethod{::F_CPU_WRITE_FEATURES}.
+ *
+ *  Write least common features to MSR_C0011004 and MSR_C0011005.
+ *
+ *    @param[in]      FamilySpecificServices   - Pointer to CPU_SPECIFIC_SERVICES struct.
+ *    @param[in,out]  cpuFeatureList           - Pointer to CPU_FEATURES_LIST struct.
+ *    @param[in]      StdHeader                - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+F10WriteFeatures (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN OUT   CPU_FEATURES_LIST *cpuFeatureList,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 CpuMsrData;
+  CPU_F10_FEATURES *CpuF10Features;
+  CPU_F10_EXT_FEATURES *CpuF10ExtFeatures;
+
+  CpuMsrData = 0;
+  CpuF10Features = (CPU_F10_FEATURES *) &CpuMsrData;
+
+  CpuF10Features->CpuF10FeaturesLo.APIC = cpuFeatureList->APIC;
+  CpuF10Features->CpuF10FeaturesLo.CLFSH = cpuFeatureList->CLFSH;
+  CpuF10Features->CpuF10FeaturesLo.CMOV = cpuFeatureList->CMOV;
+  CpuF10Features->CpuF10FeaturesLo.CMPXCHG8B = cpuFeatureList->CMPXCHG8B;
+  CpuF10Features->CpuF10FeaturesLo.DE = cpuFeatureList->DE;
+  CpuF10Features->CpuF10FeaturesLo.FPU = cpuFeatureList->FPU;
+  CpuF10Features->CpuF10FeaturesLo.FXSR = cpuFeatureList->FXSR;
+  CpuF10Features->CpuF10FeaturesLo.HTT = cpuFeatureList->HTT;
+  CpuF10Features->CpuF10FeaturesLo.MCA = cpuFeatureList->MCA;
+  CpuF10Features->CpuF10FeaturesLo.MCE = cpuFeatureList->MCE;
+  CpuF10Features->CpuF10FeaturesLo.MMX = cpuFeatureList->MMX;
+  CpuF10Features->CpuF10FeaturesLo.MSR = cpuFeatureList->MSR;
+  CpuF10Features->CpuF10FeaturesLo.MTRR = cpuFeatureList->MTRR;
+  CpuF10Features->CpuF10FeaturesLo.PAE = cpuFeatureList->PAE;
+  CpuF10Features->CpuF10FeaturesLo.PAT = cpuFeatureList->PAT;
+  CpuF10Features->CpuF10FeaturesLo.PGE = cpuFeatureList->PGE;
+  CpuF10Features->CpuF10FeaturesLo.PSE = cpuFeatureList->PSE;
+  CpuF10Features->CpuF10FeaturesLo.PSE36 = cpuFeatureList->PSE36;
+  CpuF10Features->CpuF10FeaturesLo.SSE = cpuFeatureList->SSE;
+  CpuF10Features->CpuF10FeaturesLo.SSE2 = cpuFeatureList->SSE2;
+  CpuF10Features->CpuF10FeaturesLo.SysEnterSysExit = cpuFeatureList->SysEnterSysExit;
+  CpuF10Features->CpuF10FeaturesLo.TimeStampCounter = cpuFeatureList->TimeStampCounter;
+  CpuF10Features->CpuF10FeaturesLo.VME = cpuFeatureList->VME;
+
+  CpuF10Features->CpuF10FeaturesHi.CMPXCHG16B = cpuFeatureList->CMPXCHG16B;
+  CpuF10Features->CpuF10FeaturesHi.Monitor = cpuFeatureList->Monitor;
+  CpuF10Features->CpuF10FeaturesHi.POPCNT = cpuFeatureList->POPCNT;
+  CpuF10Features->CpuF10FeaturesHi.SSE3 = cpuFeatureList->SSE3;
+
+  LibAmdMsrWrite (MSR_CPUID_FEATS, &CpuMsrData, StdHeader);
+
+  CpuMsrData = 0;
+  CpuF10ExtFeatures = (CPU_F10_EXT_FEATURES *) &CpuMsrData;
+
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.ThreeDNow = cpuFeatureList->ThreeDNow;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.ThreeDNowExt = cpuFeatureList->ThreeDNowExt;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.APIC = cpuFeatureList->APIC;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.CMOV = cpuFeatureList->CMOV;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.CMPXCHG8B = cpuFeatureList->CMPXCHG8B;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.DE = cpuFeatureList->DE;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.FFXSR = cpuFeatureList->FFXSR;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.FPU = cpuFeatureList->FPU;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.FXSR = cpuFeatureList->FXSR;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.LM = cpuFeatureList->LM;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MCA = cpuFeatureList->MCA;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MCE = cpuFeatureList->MCE;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MMX = cpuFeatureList->MMX;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MmxExt = cpuFeatureList->MmxExt;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MSR = cpuFeatureList->MSR;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.MTRR = cpuFeatureList->MTRR;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.NX = cpuFeatureList->NX;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.PAE = cpuFeatureList->PAE;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.Page1GB = cpuFeatureList->Page1GB;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.PAT = cpuFeatureList->PAT;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.PGE = cpuFeatureList->PGE;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.PSE = cpuFeatureList->PSE;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.PSE36 = cpuFeatureList->PSE36;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.RDTSCP = cpuFeatureList->RDTSCP;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.SysCallSysRet = cpuFeatureList->SysCallSysRet;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.TimeStampCounter = cpuFeatureList->TimeStampCounter;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesLo.VME = cpuFeatureList->VME;
+
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.ThreeDNowPrefetch = cpuFeatureList->ThreeDNowPrefetch;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.ABM = cpuFeatureList->ABM;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.AltMovCr8 = cpuFeatureList->AltMovCr8;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.CmpLegacy = cpuFeatureList->CmpLegacy;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.ExtApicSpace = cpuFeatureList->ExtApicSpace;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.IBS = cpuFeatureList->IBS;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.LahfSahf = cpuFeatureList->LahfSahf;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.MisAlignSse = cpuFeatureList->MisAlignSse;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.OSVM = cpuFeatureList->OSVW;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.SKINIT = cpuFeatureList->SKINIT;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.SSE4A = cpuFeatureList->SSE4A;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.SVM = cpuFeatureList->SVM;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.WDT = cpuFeatureList->WDT;
+  CpuF10ExtFeatures->CpuF10ExtFeaturesHi.NodeId = cpuFeatureList->NodeId;
+  LibAmdMsrWrite (MSR_CPUID_EXT_FEATS, &CpuMsrData, StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  cpuFeatureListNeedUpdate
+ *
+ *    Compare global CPU feature list with this core feature list to see if global CPU feature list
+ *    needs updated.
+ *
+ *    @param[in]  globalCpuFeatureList  - Pointer to global CPU Feature List.
+ *    @param[in]  thisCoreCpuFeatureList  - Pointer to this core CPU Feature List.
+ *
+ *    @retval FALSE  globalCpuFeatureList is equal to thisCoreCpuFeatureList
+ *    @retval True  globalCpuFeatureList is NOT equal to thisCoreCpuFeatureList
+ */
+BOOLEAN
+STATIC
+cpuFeatureListNeedUpdate (
+  IN       CPU_FEATURES_LIST *globalCpuFeatureList,
+  IN       CPU_FEATURES_LIST *thisCoreCpuFeatureList
+  )
+{
+  BOOLEAN flag;
+  UINT8 *global;
+  UINT8 *thisCore;
+  UINT8 i;
+
+  flag = FALSE;
+  global = (UINT8 *) globalCpuFeatureList;
+  thisCore = (UINT8 *) thisCoreCpuFeatureList;
+
+  for (i = 0; i < sizeof (CPU_FEATURES_LIST); i++) {
+    if ((*global) != (*thisCore)) {
+      flag = TRUE;
+      break;
+    }
+    global++;
+    thisCore++;
+  }
+  return flag;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  updateCpuFeatureList
+ *
+ *    Update global CPU feature list
+ *
+ *    @param[in]  globalCpuFeatureList  - Pointer to global CPU Feature List.
+ *    @param[in]  thisCoreCpuFeatureList  - Pointer to this core CPU Feature List.
+ *
+ */
+VOID
+STATIC
+updateCpuFeatureList (
+  IN       CPU_FEATURES_LIST *globalCpuFeatureList,
+  IN       CPU_FEATURES_LIST *thisCoreCpuFeatureList
+  )
+{
+  UINT8 *globalFeatureList;
+  UINT8 *thisCoreFeatureList;
+  UINT32 sizeInByte;
+
+  globalFeatureList = (UINT8 *) globalCpuFeatureList;
+  thisCoreFeatureList = (UINT8 *) thisCoreCpuFeatureList;
+
+  for (sizeInByte = 0; sizeInByte < sizeof (CPU_FEATURES_LIST); sizeInByte++) {
+    *globalFeatureList &= *thisCoreFeatureList;
+    globalFeatureList++;
+    thisCoreFeatureList++;
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10FeatureLeveling.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10FeatureLeveling.h
new file mode 100644
index 0000000000..d62adcc2e5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10FeatureLeveling.h
@@ -0,0 +1,195 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 specific feature leveling functions.
+ *
+ * Provides feature leveling functions specific to family 10h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F10_FEATURE_LEVELING_H_
+#define _CPU_F10_FEATURE_LEVELING_H_
+
+#include "cpuFamilyTranslation.h"
+#include "cpuPostInit.h"
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// F10 CPU Feature Low
+typedef struct {
+  UINT32 FPU:1;               ///< Bit0
+  UINT32 VME:1;               ///< Bit1
+  UINT32 DE:1;                ///< Bit2
+  UINT32 PSE:1;               ///< Bit3
+  UINT32 TimeStampCounter:1;  ///< Bit4
+  UINT32 MSR:1;               ///< Bit5
+  UINT32 PAE:1;               ///< Bit6
+  UINT32 MCE:1;               ///< Bit7
+  UINT32 CMPXCHG8B:1;         ///< Bit8
+  UINT32 APIC:1;              ///< Bit9
+  UINT32 Reserved1:1;         ///< Bit10
+  UINT32 SysEnterSysExit:1;   ///< Bit11
+  UINT32 MTRR:1;              ///< Bit12
+  UINT32 PGE:1;               ///< Bit13
+  UINT32 MCA:1;               ///< Bit14
+  UINT32 CMOV:1;              ///< Bit15
+  UINT32 PAT:1;               ///< Bit16
+  UINT32 PSE36:1;             ///< Bit17
+  UINT32 Reserved2:1;         ///< Bit18
+  UINT32 CLFSH:1;             ///< Bit19
+  UINT32 Reserved3:3;         ///< Bit20~22
+  UINT32 MMX:1;               ///< Bit23
+  UINT32 FXSR:1;              ///< Bit24
+  UINT32 SSE:1;               ///< Bit25
+  UINT32 SSE2:1;              ///< Bit26
+  UINT32 Reserved4:1;         ///< Bit27
+  UINT32 HTT:1;               ///< Bit28
+  UINT32 Reserved5:3;         ///< Bit29~31
+} CPU_F10_FEATURES_LO;
+
+/// F10 CPU Feature High
+typedef struct {
+  UINT32 SSE3:1;            ///< Bit0
+  UINT32 Reserved1:2;       ///< Bit1~2
+  UINT32 Monitor:1;         ///< Bit3
+  UINT32 Reserved2:9;       ///< Bit4~12
+  UINT32 CMPXCHG16B:1;      ///< Bit13
+  UINT32 Reserved3:9;       ///< Bit14~22
+  UINT32 POPCNT:1;          ///< Bit23
+  UINT32 Reserved4:8;       ///< Bit24~31
+} CPU_F10_FEATURES_HI;
+
+/// F10 CPU Feature
+typedef struct {
+  CPU_F10_FEATURES_LO CpuF10FeaturesLo; ///< Low
+  CPU_F10_FEATURES_HI CpuF10FeaturesHi; ///< High
+} CPU_F10_FEATURES;
+
+/// F10 CPU Extended Feature Low
+typedef struct {
+  UINT32 FPU:1;               ///< Bit0
+  UINT32 VME:1;               ///< Bit1
+  UINT32 DE:1;                ///< Bit2
+  UINT32 PSE:1;               ///< Bit3
+  UINT32 TimeStampCounter:1;  ///< Bit4
+  UINT32 MSR:1;               ///< Bit5
+  UINT32 PAE:1;               ///< Bit6
+  UINT32 MCE:1;               ///< Bit7
+  UINT32 CMPXCHG8B:1;         ///< Bit8
+  UINT32 APIC:1;              ///< Bit9
+  UINT32 Reserved1:1;         ///< Bit10
+  UINT32 SysCallSysRet:1;     ///< Bit11
+  UINT32 MTRR:1;              ///< Bit12
+  UINT32 PGE:1;               ///< Bit13
+  UINT32 MCA:1;               ///< Bit14
+  UINT32 CMOV:1;              ///< Bit15
+  UINT32 PAT:1;               ///< Bit16
+  UINT32 PSE36:1;             ///< Bit17
+  UINT32 Reserved2:2;         ///< Bit18~19
+  UINT32 NX:1;                ///< Bit20
+  UINT32 Reserved3:1;         ///< Bit21
+  UINT32 MmxExt:1;            ///< Bit22
+  UINT32 MMX:1;               ///< Bit23
+  UINT32 FXSR:1;              ///< Bit24
+  UINT32 FFXSR:1;             ///< Bit25
+  UINT32 Page1GB:1;           ///< Bit26
+  UINT32 RDTSCP:1;            ///< Bit27
+  UINT32 Reserved4:1;         ///< Bit28
+  UINT32 LM:1;                ///< Bit29
+  UINT32 ThreeDNowExt:1;      ///< Bit30
+  UINT32 ThreeDNow:1;         ///< Bit31
+} CPU_F10_EXT_FEATURES_LO;
+
+/// F10 CPU Extended Feature High
+typedef struct {
+  UINT32 LahfSahf:1;        ///< Bit0
+  UINT32 CmpLegacy:1;       ///< Bit1
+  UINT32 SVM:1;             ///< Bit2
+  UINT32 ExtApicSpace:1;    ///< Bit3
+  UINT32 AltMovCr8:1;       ///< Bit4
+  UINT32 ABM:1;             ///< Bit5
+  UINT32 SSE4A:1;           ///< Bit6
+  UINT32 MisAlignSse:1;     ///< Bit7
+  UINT32 ThreeDNowPrefetch:1; ///< Bit8
+  UINT32 OSVM:1;            ///< Bit9
+  UINT32 IBS:1;             ///< Bit10
+  UINT32 Reserved1:1;       ///< Bit11
+  UINT32 SKINIT:1;          ///< Bit12
+  UINT32 WDT:1;             ///< Bit13
+  UINT32 Reserved2:5;       ///< Bit14~18
+  UINT32 NodeId:1;          ///< Bit19
+  UINT32 Reserved3:12;      ///< Bit20~31
+} CPU_F10_EXT_FEATURES_HI;
+
+/// F10 CPU Extended Feature
+typedef struct {
+  CPU_F10_EXT_FEATURES_LO CpuF10ExtFeaturesLo;  ///< Low
+  CPU_F10_EXT_FEATURES_HI CpuF10ExtFeaturesHi;  ///< High
+} CPU_F10_EXT_FEATURES;
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F10SaveFeatures (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN OUT   CPU_FEATURES_LIST *cpuFeatureList,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+F10WriteFeatures (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN OUT   CPU_FEATURES_LIST *cpuFeatureList,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+#endif  // _CPU_F10_FEATURE_LEVELING_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10HtPhyTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10HtPhyTables.c
new file mode 100644
index 0000000000..14ae439f24
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10HtPhyTables.c
@@ -0,0 +1,751 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 DR PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10HTPHYTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  HT   P C I   T a b l e s
+// -------------------------
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10HtPhyRegisters[] =
+{
+// 0xCF
+// HT_PHY_HT1_FIFO_PTR_OPT_VALUE
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT1,               //
+      0xCF,                                 // Address
+      0x0000006D,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// HT_PHY_HT1_FIFO_PTR_OPT_VALUE
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT1,               //
+      0xDF,                                 // Address
+      0x0000006D,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xCF
+// Default for HT3, unless overridden below.
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xCF,                                 // Address
+      0x0000005A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xDF
+// Default for HT3, unless overridden below.
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xDF,                                 // Address
+      0x0000005A,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// 0xD1
+// [29:22] LfcMax = 20h, [21:14] LfcMin = 10h
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD1,                                 // Address
+      0x08040000,                           // regData
+      0x3FFFC000,                           // regMask
+    }}
+  },
+// 0xC1
+// [29:22] LfcMax = 20h, [21:14] LfcMin = 10h
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC1,                                 // Address
+      0x08040000,                           // regData
+      0x3FFFC000,                           // regMask
+    }}
+  },
+// 0xD1
+// [29:22] LfcMax = 10h, [21:14] LfcMin = 08h
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT1,               //
+      0xD1,                                 // Address
+      0x04020000,                           // regData
+      0x3FFFC000,                           // regMask
+    }}
+  },
+// 0xC1
+// [29:22] LfcMax = 10h, [21:14] LfcMin = 08h
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT1,               //
+      0xC1,                                 // Address
+      0x04020000,                           // regData
+      0x3FFFC000,                           // regMask
+    }}
+  },
+//
+// Deemphasis Settings
+//
+
+// HT1: clear any warm reset deemphasis settings.
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT1,               //
+      0xC5,                                 // Address
+      0x00000000,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT1,               //
+      0xD5,                                 // Address
+      0x00000000,                           // regData
+      0xE01F1FDF,                           // regMask
+    }}
+  },
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT1,               //
+      0xC4,                                 // Address
+      0x00000000,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT1,               //
+      0xD4,                                 // Address
+      0x00000000,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+
+//deemphasis level        DL1[20:16], DL2[12:8], DP1[4:0] PostCur1En[31] PostCur2En[30] PreCur1En[29] MapPostCur2En[6]
+// No deemphasis            00h        00h          00h     0                0             0             0
+// -3dB postcursor          12h        00h          00h     1                0             0             0
+// -6dB postcursor          1Fh        00h          00h     1                0             0             0
+// -8dB postcursor          1Fh        06h          00h     1                1             0             1
+// -11dB postcursor         1Fh        0Dh          00h     1                1             0             1
+// -11dB postcursor with
+// -8dB precursor           1Fh        06h          07h     1                1             1             1
+
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x00000000,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x00000000,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x80120000,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x80120000,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0x801F0000,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0x801F0000,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xC01F0640,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xC01F0640,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xC01F0D40,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xC01F0D40,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC5,                                 // Address
+      0xE01F0647,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD5,                                 // Address
+      0xE01F0647,                           // regData
+      0xE01F1F5F,                           // regMask
+    }}
+  },
+
+// Far-device deemphasis setting DCV[15:10]
+// No deemphasis                 20h
+// -2dB postcursor               19h
+// -3dB postcursor               17h
+// -5dB postcursor               11h
+// -6dB postcursor               10h
+// -7dB postcursor               0Eh
+// -8dB postcursor               0Dh
+// -9dB postcursor               0Bh
+// -11dB postcursor              09h
+
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00008000,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00008000,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__2,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00006400,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__2,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00006400,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__3,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00005C00,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__3,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00005C00,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__5,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00004400,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__5,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00004400,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__6,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00004000,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__6,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00004000,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__7,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00003800,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__7,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00003800,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00003400,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00003400,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__9,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00002C00,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__9,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00002C00,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__11,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00002400,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__11,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00002400,                           // regData
+      0x0000FC00,                           // regMask
+    }}
+  },
+
+};
+
+CONST REGISTER_TABLE ROMDATA F10HtPhyRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10HtPhyRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10HtPhyRegisters,
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10MsrTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10MsrTables.c
new file mode 100644
index 0000000000..f4f9923562
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10MsrTables.c
@@ -0,0 +1,289 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 DR, MSR tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56307 $   @e \$Date: 2011-07-11 15:13:07 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10MSRTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F10MsrRegisters[] =
+{
+//  M S R    T a b l e s
+// ----------------------
+
+// MSR_TOM2 (0xC001001D)
+// bits[63:0] - TOP_MEM2 = 0
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_TOM2,                              // MSR Address
+      0x0000000000000000,                    // OR Mask
+      0xFFFFFFFFFFFFFFFF,                    // NAND Mask
+    }}
+  },
+// MSR_SYS_CFG (0xC0010010)
+// bit[21] = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_SYS_CFG,                           // MSR Address
+      (1 << 21),                             // OR Mask
+      (1 << 21),                             // NAND Mask
+    }}
+  },
+// MSR_HWCR (0xC0010015)
+// Do not set bit[24] = 1, it will be set in AmdInitPost.
+// bit[4] = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_HWCR,                              // MSR Address
+      0x0000000000000010,                    // OR Mask
+      0x0000000000000010,                    // NAND Mask
+    }}
+  },
+// MSR_MC4_CTL_MASK (0xC0010048)
+// bit[10] = 1
+// bits[22:19] = 1111b
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_MC4_CTL_MASK,                      // MSR Address
+      0x0000000000780400,                    // OR Mask
+      0x0000000000780400,                    // NAND Mask
+    }}
+  },
+// MSR_DC_CFG (0xC0011022)
+// bits[35:34] = 01
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},                     // platformFeatures
+    {{
+      MSR_DC_CFG,                            // MSR Address
+      0x0000000400000000,                    // OR Mask
+      0x0000000C00000000,                    // NAND Mask
+    }}
+  },
+// MSR_NB_CFG (0xC001001F)
+// bit[54] = 1
+// bit[52:51] = 11b for Erratum #372
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},   // platformFeatures
+    {{
+      MSR_NB_CFG,                            // MSR Address
+      0x0058000000000000,                    // OR Mask
+      0x0058000000000000,                    // NAND Mask
+    }}
+  },
+// MSR_LS_CFG (0xC0011020)
+// bit[8] = 1 for Erratum #670
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_LS_CFG,                           // MSR Address
+      (1 << 8),                             // OR Mask
+      (1 << 8),                             // NAND Mask
+    }}
+  },
+// MSR_DC_CFG (0xC0011022)
+// bit[24] = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_DC_CFG,                            // MSR Address
+      (1 << 24),                             // OR Mask
+      (1 << 24),                             // NAND Mask
+    }}
+  },
+// MSR_CPUID_FEATS (0xC0011004)
+// bit[28] = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_MULTI_CORE | AMD_PF_DUAL_CORE) },  // platformFeatures
+    {{
+      MSR_CPUID_FEATS,                       // MSR Address
+      (1 << 28),                             // OR Mask
+      (1 << 28),                             // NAND Mask
+    }}
+  },
+// MSR_CPUID_EXT_FEATS (0xC0011005)
+// bit[33] = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_DUAL_CORE},                     // platformFeatures
+    {{
+      MSR_CPUID_EXT_FEATS,                   // MSR Address
+      0x0000000200000000,                    // OR Mask
+      0x0000000200000000,                    // NAND Mask
+    }}
+  },
+// MSR_OSVW_ID_Length (0xC0010140)
+// bit[15:0] = 4
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_OSVW_ID_Length,                    // MSR Address
+      0x0000000000000004,                    // OR Mask
+      0x000000000000FFFF,                    // NAND Mask
+    }}
+  },
+// MSR_OSVW_Status (0xC0010141)
+// bit[3] = 1 for Erratum #383
+// bit[2] = 1 for Erratum #415
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_OSVW_Status,                       // MSR Address
+      0x000000000000000C,                    // OR Mask
+      0x000000000000000C,                    // NAND Mask
+    }}
+  },
+// This MSR should be set after the code that most errata would be applied in
+// MSR_MC0_CTL (0x00000400)
+// bits[63:0]  = 0xFFFFFFFFFFFFFFFF
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_MC0_CTL,                           // MSR Address
+      0xFFFFFFFFFFFFFFFF,                    // OR Mask
+      0xFFFFFFFFFFFFFFFF,                    // NAND Mask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F10MsrRegisterTable = {
+  AllCores,
+  (sizeof (F10MsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *)F10MsrRegisters,
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PciTables.c
new file mode 100644
index 0000000000..5ed043f647
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PciTables.c
@@ -0,0 +1,772 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 DR PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10PCITABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F10PciRegisters[] =
+{
+// Function 0 - HT Config
+
+// F0x68 - Link Transaction Control
+// bit[11]   , RespPassPW = 1
+// bit[19:17], for 8bit APIC config
+// bit[22:21], DsNpReqLmt = 10h
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68),  // Address
+      0x004E0800,                           // regData
+      0x006E0800,                           // regMask
+    }}
+  },
+// F0x68 - Link Transaction Control
+// For uni-processor systems (that is, single link package processors), single core, and no L3:
+// [10, DisFillP] = 1b
+// [3, DisWrDwP] = 1b
+// [2, DisWrBP] = 1b
+// [1, DisRdDwP] = 1b
+// [0, DisRdBP] = 1b
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_CORE | AMD_PF_SINGLE_LINK) },   // platformFeatures
+    {{
+      PERFORMANCE_NO_L3_CACHE,
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68),  // Address
+      0x0000040F,                           // regData
+      0x0000040F,                           // regMask
+    }}
+  },
+// F0x[E4,C4,A4,84] - Link 0 Control Register
+// bit[13] LdtStopTriEn = 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HT_HOST_FEATURES_ALL,                 // link feats
+      0x04,                                 // Address
+      0x00002000,                           // regData
+      0x00002000,                           // regMask
+    }}
+  },
+// F0x[E4,C4,A4,84] - Link 0 Control Register
+// bit [12] IsocEn = 0 default
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_NFCM | AMD_PF_UMA) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // link feats
+      0x04,                                 // Address
+      0x00000000,                           // regData
+      0x00001000,                           // regMask
+    }}
+  },
+// F0x[E4,C4,A4,84] - Link 0 Control Register
+// bit [12] IsocEn = 1 for Isochronous control flow modes.
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    { (AMD_PF_UMA_IFCM | AMD_PF_IFCM | AMD_PF_IOMMU) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // link feats
+      0x04,                                 // Address
+      0x00001000,                           // regData
+      0x00001000,                           // regMask
+    }}
+  },
+// F0x[F0,D0,B0,90] - Link Base Channel Buffer Count
+// bit[31] LockBc = 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HT_HOST_FEATURES_ALL,                 // link feats
+      0x10,                                 // Address
+      0x80000000,                           // regData
+      0x80000000,                           // regMask
+    }}
+  },
+// F0x150 - Link Global Retry Control Register
+// bit[18:16] TotalRetryAttempts = 7
+// bit[13] HtRetryCrcDatInsDynEn = 1
+// bit[12]HtRetryCrcCmdPackDynEn = 1
+// bit[11:9] HtRetryCrcDatIns = 4
+// bit[8] HtRetryCrcCmdPack = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x150), // Address
+      0x00073900,                           // regData
+      0x00073F00,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[15:13] ForceFullT0 = 0
+// bit[5:0] T0Time = 0x14
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x00000014,                           // regData
+      0x0000E03F,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[15:13] ForceFullT0 = 6
+// bit[5:0] T0Time = 0x26
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x0000C026,                           // regData
+      0x0000E03F,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[22:17] FullT0Time = 0x33
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                          // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x00660000,                           // regData
+      0x007E0000,                           // regMask
+    }}
+  },
+
+// Function 1 - Map Init
+
+// Before reading F1x114_x2 or F1x114_x3 software must initialize
+// the registers or NB Array MCA errors may occur.  BIOS should
+// initialize index 0h of F1x114_x2 and F1x114_x3 to prevent reads
+// from F1x114 from generating NB Array MCA errors.
+// BKDG Doc #3116 Rev 1.07
+
+// F1x110 - Extended Address Map
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_1, 0x110), // Address
+      0x20000000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+// F1x114 - Extended Address Map
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_1, 0x114), // Address
+      0x00000000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+// F1x110 - Extended Address Map
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_1, 0x110), // Address
+      0x30000000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+// F1x114 - Extended Address Map
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_1, 0x114), // Address
+      0x00000000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+
+// F2x1B0 - Extended Memory Controller Configuration Low
+// bits[10:8], CohPrefPrbLmt = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x1B0),  // Address
+      0x00000100,                           // regData
+      0x00000700,                           // regMask
+    }}
+  },
+
+// Function 3 - Misc. Control
+// F3x40 - MCA NB Control
+//
+// bit[8], MstrAbrtEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x40),  // Address
+      0x00000100,                           // regData
+      0x00000100,                           // regMask
+    }}
+  },
+// F3x44 - MCA NB Configuration
+// bit[30]  SyncOnDramAdrParErrEn = 1
+// bit[27]  NB MCA to CPU0 Enable = 1
+// bit[25]  DisPciCfgCpuErrRsp = 1
+// bit[21]  SyncOnErr = 1
+// bit[20]  SyncOnWDTEn = 1
+// bit[6]   CpuErrDis = 1
+// bit[4]   SyncPktPropDis = 1
+// bit[3]   SyncPktGenDis = 1
+// bit[2]   SyncOnUcEccEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x44),  // Address
+      0x4A30005C,                           // regData
+      0x4A30005C,                           // regMask
+    }}
+  },
+// F3x80 - ACPI Power State Control
+// ACPI FIDVID Change
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 0
+// bits[2] NbGateEn = 0
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 0
+// ACPI State S1
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 1
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 7
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0xE6000000,                           // regData
+      0xFFFF0000,                           // regMask
+    }}
+  },
+// F3x80 - ACPI Power State Control
+// ACPI FIDVID Change
+// bits[0] CpuPrbEn = 1
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 0
+// bits[3] NbCofChg = 1
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                          // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0x000B0000,                           // regData
+      0x00FF0000,                           // regMask
+    }}
+  },
+// F3x84 - ACPI Power State Control
+// ACPI State S3
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 1
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 7
+// ACPI State Throttling
+// bits[0] CpuPrbEn = 1
+// bits[1] NbLowPwrEn = 0
+// bits[2] NbGateEn = 0
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 2
+// ACPI State S4/S5
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 1
+// bits[2] NbGateEn = 1
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 7
+// ACPI State C1
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 0
+// bits[2] NbGateEn = 0
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 5
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x84),  // Address
+      0x01E641E6,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+// F3x84 - ACPI Power State Control
+// ACPI State C1
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 0
+// bits[2] NbGateEn = 0
+// bits[3] NbCofChg = 0
+// bits[4] AltVidEn = 0
+// bits[7:5] ClkDivisor = 4
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C2                          // CpuRevision
+    },
+    {AMD_PF_SINGLE_CORE},                   // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x84),  // Address
+      0x80000000,                           // regData
+      0xFF000000,                           // regMask
+    }}
+  },
+// F3x8C - NB Configuration High
+// Errata 373, bits[25] DisFastTprWr = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x8C),  // Address
+      0x02000000,                           // regData
+      0x02000000,                           // regMask
+    }}
+  },
+// F3x8C - NB Configuration High
+// Clear errata 373, bits[25] DisFastTprWr = 0
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platform Features
+    {{
+      PERFORMANCE_L3_CACHE,                 // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x8C),  // Address
+      0x00000000,                           // regData
+      0x02000000,                           // regMask
+    }}
+  },
+// F3xA0 - Power Control Miscellaneous
+// bits[13:11] PllLockTime = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_C0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0),  // Address
+      0x00000800,                           // regData
+      0x00003800,                           // regMask
+    }}
+  },
+// F3xA0 - Power Control Miscellaneous
+// bits[9] SviHighFreqSel = 1, if PERFORMANCE_VRM_HIGH_SPEED_ENABLE == TRUE
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_C3                            // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platformFeatures
+    {{
+      PERFORMANCE_VRM_HIGH_SPEED_ENABLE,    // PerformanceFeatures
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0),  // Address
+      0x00000200,                           // regData
+      0x00000200,                           // regMask
+    }}
+  },
+// F3xA4 - Reported Temperature Control
+// bits[12:8] PerStepTimeDn = 15
+// bits[7] TmpSlewDnEn = 1
+// bits[6:5] TmpMaxDiffUp = 3
+// bits[4:0] PerStepTimeUp = 15
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA4),  // Address
+      0x00000FEF,                           // regData
+      0x00001FFF,                           // regMask
+    }}
+  },
+// F3xD4 - Clock Power Timing Control 0
+// bits[11:8] ClkRampHystSel = 1
+// bits[30:28] NbClkDiv = 1
+// bits[31] NbClkDivApplyAll = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xD4),  // Address
+      0xC0010F00,                           // regData
+      0xF0030F00,                           // regMask
+    }}
+  },
+// F3xD8 - Clock Power Timing Control 1
+// bits[2:0] VSSlamTime = 6
+// bits[6:4] VSRampTime = 1
+// bits[26:24] ReConDel = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xD8),  // Address
+      0x03000016,                           // regData
+      0x0F000077,                           // regMask
+    }}
+  },
+// F3xDC - Clock Power Timing Control 2
+// bits[14:12] NbsynPtrAdj = 6
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xDC),  // Address
+      0x00006000,                           // regData
+      0x00007000,                           // regMask
+    }}
+  },
+// F3xDC - Clock Power Timing Control 2
+// bits[18:16] CacheFlushOnHaltCtl = 0 to ensure AP cache stability at Early
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_Bx                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xDC),  // Address
+      0x00000000,                           // regData
+      0x00070000,                           // regMask
+    }}
+  },
+// F3x180 - NB Extended Configuration
+// bits[1] SyncFloodOnUsPwDataErr = 1
+// bits[5] DisPciCfgCpuMstAbtRsp = 1
+// bits[6] SyncFloodOnDatErr = 1
+// bits[7] SyncFloodOnTgtAbtErr = 1
+// bits[8] SyncOnProtEn = 1
+// bits[9] SyncOnUncNbAryEn = 1
+// bits[20] SyncFloodOnL3LeakErr = 1
+// bits[21] SyncFloodOnCpuLeakErr = 1
+// bits[22] SyncFloodOnTblWalkErr = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x180), // Address
+      0x007003E2,                           // regData
+      0x007003E2,                           // regMask
+    }}
+  },
+// F3x188 - NB Extended Configuration Low Register
+// bits[4] EnStpGntOnFlushMaskWakeup = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_C3                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x188), // Address
+      0x00000010,                           // regData
+      0x00000010,                           // regMask
+    }}
+  },
+// F3x1A0 - L3 Buffer Count Register
+// bits[14:12]  L3ToSriReqCBC = 4, 4 or fewer cores with L3 cache is 4.
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,
+      (CORE_RANGE_0 (COUNT_RANGE_LOW, 4) | COUNT_RANGE_NONE), // 4 or fewer cores.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1A0),     // Address
+      0x00004000,                               // regData
+      0x00007000,                               // regMask
+    }}
+  },
+// F3x1A0 - L3 Buffer Count Register
+// bits[14:12]  L3ToSriReqCBC = 5, 5-core with L3 cache is 5.
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,
+      (CORE_RANGE_0 (5, 5) | COUNT_RANGE_NONE), // 5 core.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1A0),     // Address
+      0x00005000,                               // regData
+      0x00007000,                               // regMask
+    }}
+  },
+// F3x1A0 - L3 Buffer Count Register
+// bits[14:12]  L3ToSriReqCBC = 6, 6-core with L3 cache is 6.
+  {
+    CoreCountsPciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,
+      (CORE_RANGE_0 (6, 6) | COUNT_RANGE_NONE), // 6 core.
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1A0),     // Address
+      0x00006000,                               // regData
+      0x00007000,                               // regMask
+    }}
+  },
+// F3x1B8 - L3 Control
+// bits[12] L3PrivReplEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1B8), // Address
+      0x00001000,                           // regData
+      0x00001000,                           // regMask
+    }}
+  },
+  // F4x1C4 - L3 Power Control Register
+  // bits[8] L3PwrSavEn = 1
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,                 // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x1C4), // Address
+      0x00000100,                           // regData
+      0x00000100,                           // regMask
+    }}
+  },
+// F3x1CC - IBS Control
+// bits[8] LvtOffsetVal = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_10,                      // CpuFamily
+      AMD_F10_GT_A2                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1CC), // Address
+      0x00000100,                           // regData
+      0x00000100,                           // regMask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F10PciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F10PciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F10PciRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerCheck.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerCheck.c
new file mode 100644
index 0000000000..b855b0b422
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerCheck.c
@@ -0,0 +1,411 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 P-State power check
+ *
+ * Performs the "Processor-Systemboard Power Delivery Compatibility Check" as
+ * described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF10PowerCheck.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuF10Utilities.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10POWERCHECK_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F10PmPwrCheckCore (
+  IN     VOID *ErrorData,
+  IN     AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+F10PmPwrChkCopyPstate (
+  IN     UINT8 Dest,
+  IN     UINT8 Src,
+  IN     AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 10h core 0 entry point for performing the family 10h Processor-
+ * Systemboard Power Delivery Check.
+ *
+ * The steps are as follows:
+ *    1. Starting with P0, loop through all P-states until a passing state is
+ *       found.  A passing state is one in which the current required by the
+ *       CPU is less than the maximum amount of current that the system can
+ *       provide to the CPU.  If P0 is under the limit, no further action is
+ *       necessary.
+ *    2. If at least one P-State is under the limit & at least one P-State is
+ *       over the limit, the BIOS must:
+ *       a. If the processor's current P-State is disabled by the power check,
+ *          then the BIOS must request a transition to an enabled P-state
+ *          using MSRC001_0062[PstateCmd] and wait for MSRC001_0063[CurPstate]
+ *          to reflect the new value.
+ *       b. Copy the contents of the enabled P-state MSRs to the highest
+ *          performance P-state locations.
+ *       c. Request a P-state transition to the P-state MSR containing the
+ *          COF/VID values currently applied.
+ *       d. On revision E systems with CPUID Fn8000_0007[CPB]=1, if P0 is disabled then
+ *          program F4x15C[BoostSrc]=0. This step uses hardware P-state numbering.
+ *       e. Adjust the following P-state parameters affected by the P-state
+ *          MSR copy by subtracting the number of P-states that are disabled
+ *          by the power check.
+ *          1. F3x64[HtcPstateLimit]
+ *          2. F3x68[StcPstateLimit]
+ *          3. F3xDC[PstateMaxVal]
+ *    3. If all P-States are over the limit, the BIOS must:
+ *       a. If the processor's current P-State is !=F3xDC[PstateMaxVal], then
+ *          write F3xDC[PstateMaxVal] to MSRC001_0062[PstateCmd] and wait for
+ *          MSRC001_0063[CurPstate] to reflect the new value.
+ *       b. If F3xDC[PstateMaxVal]!= 000b, copy the contents of the P-state
+ *          MSR pointed to by F3xDC[PstateMaxVal] to MSRC001_0064 and set
+ *          MSRC001_0064[PstateEn]
+ *       c. Write 000b to MSRC001_0062[PstateCmd] and wait for MSRC001_0063
+ *          [CurPstate] to reflect the new value.
+ *       d. Adjust the following P-state parameters to zero on revision D and earlier processors.
+ *          On revision E processors adjust the following fields to F4x15C[NumBoostStates]:
+ *          1. F3x64[HtcPstateLimit]
+ *          2. F3x68[StcPstateLimit]
+ *          3. F3xDC[PstateMaxVal]
+ *       e. For revision E systems with CPUID Fn8000_0007[CPB]=1, program F4x15C[BoostSrc]=0.
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParams          Service parameters
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F10PmPwrCheck (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT8       DisPsNum;
+  UINT8       PsMaxVal;
+  UINT8       Pstate;
+  UINT32      ProcIddMax;
+  UINT32      LocalPciRegister;
+  UINT32      Socket;
+  UINT32      Module;
+  UINT32      Core;
+  UINT32      AndMask;
+  UINT32      OrMask;
+  UINT32      PstateLimit;
+  PCI_ADDR    PciAddress;
+  UINT64      LocalMsrRegister;
+  AP_TASK     TaskPtr;
+  AGESA_STATUS IgnoredSts;
+  PWRCHK_ERROR_DATA ErrorData;
+
+  // get the socket number
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+  ErrorData.SocketNumber = (UINT8)Socket;
+
+  ASSERT (Core == 0);
+
+  // get the Max P-state value
+  for (PsMaxVal = NM_PS_REG - 1; PsMaxVal != 0; --PsMaxVal) {
+    LibAmdMsrRead (PS_REG_BASE + PsMaxVal, &LocalMsrRegister, StdHeader);
+    if (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1) {
+      break;
+    }
+  }
+
+  ErrorData.HwPstateNumber = (UINT8) (PsMaxVal + 1);
+
+  DisPsNum = 0;
+  for (Pstate = 0; Pstate < ErrorData.HwPstateNumber; Pstate++) {
+    if (FamilySpecificServices->GetProcIddMax (FamilySpecificServices, Pstate, &ProcIddMax, StdHeader)) {
+      if (ProcIddMax > CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].CurrentLimit) {
+        // Add to event log the Pstate that exceeded the current limit
+        PutEventLog (AGESA_WARNING,
+                     CPU_EVENT_PM_PSTATE_OVERCURRENT,
+                     Socket, Pstate, 0, 0, StdHeader);
+        DisPsNum++;
+      } else {
+        break;
+      }
+    }
+  }
+
+  // If all P-state registers are disabled, move P[PsMaxVal] to P0
+  // and transition to P0, then wait for CurPstate = 0
+
+  ErrorData.AllowablePstateNumber = ((PsMaxVal + 1) - DisPsNum);
+
+  // We only need to log this event on the BSC
+  if (ErrorData.AllowablePstateNumber == 0) {
+    PutEventLog (AGESA_FATAL,
+                 CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT,
+                 Socket, 0, 0, 0, StdHeader);
+  }
+
+  if (DisPsNum != 0) {
+    GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+    // Check if CPB is supported. if yes, get the number of boost states.
+    ErrorData.NumberofBoostStates = F10GetNumberOfBoostedPstatesOnCore (StdHeader);
+
+    TaskPtr.FuncAddress.PfApTaskI = F10PmPwrCheckCore;
+    TaskPtr.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (PWRCHK_ERROR_DATA);
+    TaskPtr.DataTransfer.DataPtr = &ErrorData;
+    TaskPtr.DataTransfer.DataTransferFlags = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParams);
+
+    // Final Step 1
+    // For revision E systems with CPUID Fn8000_0007[CPB]=1, if P0 is disabled then
+    // program F4x15C[BoostSrc]=0. This step uses hardware P-state numbering.
+    if (ErrorData.NumberofBoostStates == 1) {
+      PciAddress.Address.Function = FUNC_4;
+      PciAddress.Address.Register = CPB_CTRL_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((CPB_CTRL_REGISTER *) &LocalPciRegister)->BoostSrc = 0;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    }
+    // Final Step 2
+    //    F3x64[HtPstatelimit] -= disPsNum
+    //    F3x68[StcPstateLimit]-= disPsNum
+    //    F3xDC[PstateMaxVal]-= disPsNum
+
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = HTC_REG;
+    AndMask = 0xFFFFFFFF;
+    ((HTC_REGISTER *) &AndMask)->HtcPstateLimit = 0;
+    OrMask = 0x00000000;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3x64
+    PstateLimit = ((HTC_REGISTER *) &LocalPciRegister)->HtcPstateLimit;
+    if (ErrorData.AllowablePstateNumber != 0) {
+      if (PstateLimit > DisPsNum) {
+        PstateLimit -= DisPsNum;
+        ((HTC_REGISTER *) &OrMask)->HtcPstateLimit = PstateLimit;
+      }
+    } else {
+      ((HTC_REGISTER *) &OrMask)->HtcPstateLimit = ErrorData.NumberofBoostStates;
+    }
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); //F3x64
+
+    PciAddress.Address.Register = STC_REG;
+    AndMask = 0xFFFFFFFF;
+    ((STC_REGISTER *) &AndMask)->StcPstateLimit = 0;
+    OrMask = 0x00000000;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3x68
+    PstateLimit = ((STC_REGISTER *) &LocalPciRegister)->StcPstateLimit;
+    if (ErrorData.AllowablePstateNumber != 0) {
+      if (PstateLimit > DisPsNum) {
+        PstateLimit -= DisPsNum;
+        ((STC_REGISTER *) &OrMask)->StcPstateLimit = PstateLimit;
+      }
+    } else {
+      ((STC_REGISTER *) &OrMask)->StcPstateLimit = ErrorData.NumberofBoostStates;
+    }
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); //F3x68
+
+    PciAddress.Address.Register = CPTC2_REG;
+    AndMask = 0xFFFFFFFF;
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &AndMask)->PstateMaxVal = 0;
+    OrMask = 0x00000000;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3xDC
+    PstateLimit = ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal;
+    if (ErrorData.AllowablePstateNumber != 0) {
+      if (PstateLimit > DisPsNum) {
+        PstateLimit -= DisPsNum;
+        ((CLK_PWR_TIMING_CTRL2_REGISTER *) &OrMask)->PstateMaxVal = PstateLimit;
+      }
+    } else {
+      ((CLK_PWR_TIMING_CTRL2_REGISTER *) &OrMask)->PstateMaxVal = ErrorData.NumberofBoostStates;
+    }
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); //F3xDC
+
+    // Now that P0 has changed, recalculate VSSlamTime
+    F10ProgramVSSlamTimeOnSocket (&PciAddress, CpuEarlyParams, StdHeader);
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Core-level error handler called if any p-states were determined to be out
+ * of range for the mother board.
+ *
+ * This function implements steps 2a-c and 3a-c on each core.
+ *
+ * @param[in]  ErrorData            Details about the error condition.
+ * @param[in]  StdHeader            Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F10PmPwrCheckCore (
+  IN       VOID *ErrorData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8  i;
+  UINT8  PsMaxVal;
+  UINT8  DisPsNum;
+  UINT8  CurrentPs;
+  UINT8  EnBsNum;
+  UINT64 LocalMsrRegister;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  PsMaxVal = (((PWRCHK_ERROR_DATA *) ErrorData)->HwPstateNumber - 1);
+  DisPsNum = (((PWRCHK_ERROR_DATA *) ErrorData)->HwPstateNumber -
+             ((PWRCHK_ERROR_DATA *) ErrorData)->AllowablePstateNumber);
+  EnBsNum = ((PWRCHK_ERROR_DATA *) ErrorData)->NumberofBoostStates;
+
+  LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+  CurrentPs = (UINT8) (((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate);
+
+  if (((PWRCHK_ERROR_DATA *) ErrorData)->AllowablePstateNumber == 0) {
+
+    // Step 1
+    // Transition to Pstate Max if not there already
+
+    if ((CurrentPs + EnBsNum) != PsMaxVal) {
+      FamilySpecificServices->TransitionPstate (FamilySpecificServices, (PsMaxVal - EnBsNum), (BOOLEAN) TRUE, StdHeader);
+    }
+
+
+    // Step 2
+    // If Pstate Max is not 000b, copy Pstate max contents to P0 and switch
+    // to P0. This step uses software P-state numbering
+
+    if (PsMaxVal != 0) {
+      F10PmPwrChkCopyPstate (EnBsNum, PsMaxVal, StdHeader);
+      FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) 0, (BOOLEAN) TRUE, StdHeader);
+    }
+  } else {
+
+    // move remaining P-state register(s) up
+    // Step 1
+    // Transition to a valid Pstate if current Pstate has been disabled
+
+    if ((CurrentPs + EnBsNum) < DisPsNum) {
+      FamilySpecificServices->TransitionPstate (FamilySpecificServices, (DisPsNum - EnBsNum), (BOOLEAN) TRUE, StdHeader);
+      CurrentPs = DisPsNum - EnBsNum;
+    }
+
+    // Step 2
+    // Move enabled Pstates up and disable the remainder. This step uses software P-state numbering.
+    if (DisPsNum > EnBsNum) {
+      for (i = 0; (i + DisPsNum) <= PsMaxVal; ++i) {
+        F10PmPwrChkCopyPstate ((i + EnBsNum), (i + DisPsNum), StdHeader);
+      }
+    }
+    // Step 3
+    // Transition to current COF/VID at shifted location
+
+    CurrentPs = ((CurrentPs + EnBsNum) - DisPsNum);
+    FamilySpecificServices->TransitionPstate (FamilySpecificServices, CurrentPs, (BOOLEAN) TRUE, StdHeader);
+  }
+  i = ((PWRCHK_ERROR_DATA *) ErrorData)->AllowablePstateNumber;
+  if (i == 0) {
+    ++i;
+  }
+  while (i <= PsMaxVal) {
+    FamilySpecificServices->DisablePstate (FamilySpecificServices, i, StdHeader);
+    ++i;
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Copies the contents of one P-State MSR to another.
+ *
+ * @param[in]  Dest              Destination p-state number
+ * @param[in]  Src               Source p-state number
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+STATIC
+F10PmPwrChkCopyPstate (
+  IN       UINT8 Dest,
+  IN       UINT8 Src,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 LocalMsrRegister;
+
+  LibAmdMsrRead ((UINT32) (PS_REG_BASE + Src), &LocalMsrRegister, StdHeader);
+  LibAmdMsrWrite ((UINT32) (PS_REG_BASE + Dest), &LocalMsrRegister, StdHeader);
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerCheck.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerCheck.h
new file mode 100644
index 0000000000..7721a2866f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerCheck.h
@@ -0,0 +1,83 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Power related functions and structures
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F10_POWER_CHECK_H_
+#define _CPU_F10_POWER_CHECK_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// Power Check Error Data
+typedef struct {
+  UINT8 SocketNumber;                 ///< Socket Number
+  UINT8 HwPstateNumber;               ///< Hardware P-state Number
+  UINT8 AllowablePstateNumber;        ///< Allowable P-state Number
+  UINT8 NumberofBoostStates;          ///< The Number of Boost States
+} PWRCHK_ERROR_DATA;
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F10PmPwrCheck (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F10_POWER_CHECK_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerMgmt.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerMgmt.h
new file mode 100644
index 0000000000..024e760b76
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerMgmt.h
@@ -0,0 +1,547 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Power Management related stuff
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPUF10POWERMGMT_H_
+#define _CPUF10POWERMGMT_H_
+
+/*
+ * Family 10h CPU Power Management MSR definitions
+ *
+ */
+
+/* Interrupt Pending and CMP-Halt MSR Register 0xC0010055 */
+#define MSR_INTPEND 0xC0010055
+
+/// Interrupt Pending and CMP-Halt MSR Register
+typedef struct {
+  UINT64 IoMsgAddr:16;               ///< IO message address
+  UINT64 IoMsgData:8;                ///< IO message data
+  UINT64 IntrPndMsgDis:1;            ///< Interrupt pending message disable
+  UINT64 IntrPndMsg:1;               ///< Interrupt pending message
+  UINT64 IoRd:1;                     ///< IO read
+  UINT64 SmiOnCmpHalt:1;             ///< SMI on chip multi-processing halt
+  UINT64 C1eOnCmpHalt:1;             ///< C1E on chip multi-processing halt
+  UINT64 BmStsClrOnHltEn:1;          ///< Clear BM status bit on server C1e entry
+  UINT64 :34;                        ///< Reserved
+} INTPEND_MSR;
+
+
+/* P-state Current Limit Register 0xC0010061 */
+#define MSR_PSTATE_CURRENT_LIMIT 0xC0010061
+
+/// Pstate Current Limit MSR Register
+typedef struct {
+  UINT64 CurPstateLimit:3;           ///< Current Pstate Limit
+  UINT64 :1;                         ///< Reserved
+  UINT64 PstateMaxVal:3;             ///< Pstate Max Value
+  UINT64 :57;                        ///< Reserved
+} PSTATE_CURLIM_MSR;
+
+
+/* P-state Control Register 0xC0010062 */
+#define MSR_PSTATE_CTL 0xC0010062
+
+/// Pstate Control MSR Register
+typedef struct {
+  UINT64 PstateCmd:3;                ///< Pstate change command
+  UINT64 :61;                        ///< Reserved
+} PSTATE_CTRL_MSR;
+
+
+/* P-state Status Register 0xC0010063 */
+#define MSR_PSTATE_STS 0xC0010063
+
+/// Pstate Status MSR Register
+typedef struct {
+  UINT64 CurPstate:3;                ///< Current Pstate
+  UINT64 :61;                        ///< Reserved
+} PSTATE_STS_MSR;
+
+
+/* P-state Registers 0xC001006[8:4] */
+#define MSR_PSTATE_0 0xC0010064
+#define MSR_PSTATE_1 0xC0010065
+#define MSR_PSTATE_2 0xC0010066
+#define MSR_PSTATE_3 0xC0010067
+#define MSR_PSTATE_4 0xC0010068
+
+#define PS_REG_BASE MSR_PSTATE_0     /* P-state Register base */
+#define PS_MAX_REG  MSR_PSTATE_4     /* Maximum P-State Register */
+#define PS_MIN_REG  MSR_PSTATE_0     /* Minimum P-State Register */
+#define NM_PS_REG 5                  /* number of P-state MSR registers */
+
+/// Pstate MSR
+typedef struct {
+  UINT64 CpuFid:6;                   ///< CpuFid
+  UINT64 CpuDid:3;                   ///< CpuDid
+  UINT64 CpuVid:7;                   ///< CpuVid
+  UINT64 :6;                         ///< Reserved
+  UINT64 NbDid:1;                    ///< NbDid
+  UINT64 :2;                         ///< Reserved
+  UINT64 NbVid:7;                    ///< NbVid
+  UINT64 IddValue:8;                 ///< IddValue
+  UINT64 IddDiv:2;                   ///< IddDiv
+  UINT64 :21;                        ///< Reserved
+  UINT64 PsEnable:1;                 ///< Pstate Enable
+} PSTATE_MSR;
+
+
+/* COFVID Control Register 0xC0010070 */
+#define MSR_COFVID_CTL 0xC0010070
+
+/// COFVID Control MSR Register
+typedef struct {
+  UINT64 CpuFid:6;                   ///< CpuFid
+  UINT64 CpuDid:3;                   ///< CpuDid
+  UINT64 CpuVid:7;                   ///< CpuVid
+  UINT64 PstateId:3;                 ///< Pstate ID
+  UINT64 :3;                         ///< Reserved
+  UINT64 NbDid:1;                    ///< NbDid
+  UINT64 :2;                         ///< Reserved
+  UINT64 NbVid:7;                    ///< NbVid
+  UINT64 :32;                        ///< Reserved
+} COFVID_CTRL_MSR;
+
+
+/* COFVID Status Register 0xC0010071 */
+#define MSR_COFVID_STS 0xC0010071
+
+/// COFVID Status MSR Register
+typedef struct {
+  UINT64 CurCpuFid:6;                ///< Current CpuFid
+  UINT64 CurCpuDid:3;                ///< Current CpuDid
+  UINT64 CurCpuVid:7;                ///< Current CpuVid
+  UINT64 CurPstate:3;                ///< Current Pstate
+  UINT64 :3;                         ///< Reserved
+  UINT64 CurNbDid:1;                 ///< Current NbDid
+  UINT64 :2;                         ///< Reserved
+  UINT64 CurNbVid:7;                 ///< Current NbVid
+  UINT64 StartupPstate:3;            ///< Startup Pstate
+  UINT64 MaxVid:7;                   ///< MaxVid
+  UINT64 MinVid:7;                   ///< MinVid
+  UINT64 MaxCpuCof:6;                ///< MaxCpuCof
+  UINT64 :1;                         ///< Reserved
+  UINT64 CurPstateLimit:3;           ///< Current Pstate Limit
+  UINT64 MaxNbFid:5;                 ///< MaxNbFid
+} COFVID_STS_MSR;
+
+/* C-state Address Register 0xC0010073 */
+#define MSR_CSTATE_ADDRESS 0xC0010073
+
+/// C-state Address MSR Register
+typedef struct {
+  UINT64 CstateAddr:16;              ///< C-state address
+  UINT64 :48;                        ///< Reserved
+} CSTATE_ADDRESS_MSR;
+
+/*
+ * Family 10h CPU Power Management PCI definitions
+ *
+ */
+
+/* DRAM Configuration High Register F2x[1,0]94 */
+#define DRAM_CFG_HI_REG0 0x94
+#define DRAM_CFG_HI_REG1 0x194
+
+/// DRAM Configuration High PCI Register
+typedef struct {
+  UINT32 MemClkFreq:3;               ///< Memory clock frequency
+  UINT32 MemClkFreqVal:1;            ///< Memory clock frequency valid
+  UINT32 :4;                         ///< Reserved
+  UINT32 Ddr3Mode:1;                 ///< DDR3 mode
+  UINT32 LegacyBiosMode:1;           ///< Legacy BIOS mode
+  UINT32 ZqcsInterval:2;             ///< ZQ calibration short interval
+  UINT32 RDqsEn:1;                   ///< Read DQS enable
+  UINT32 DisSimulRdWr:1;             ///< Disable simultaneous read and write
+  UINT32 DisDramInterface:1;         ///< Disable the DRAM interface
+  UINT32 PowerDownEn:1;              ///< Power down mode enable
+  UINT32 PowerDownMode:1;            ///< Power down mode
+  UINT32 :1;                         ///< Reserved
+  UINT32 FourRankRDimm:1;            ///< Four rank registered DIMM connected
+  UINT32 DcqArbBypassEn:1;           ///< DRAM controller arbiter bypass enable
+  UINT32 SlowAccessMode:1;           ///< Slow access mode
+  UINT32 FreqChgInProg:1;            ///< Frequency change in progress
+  UINT32 BankSwizzleMode:1;          ///< Bank swizzle mode
+  UINT32 ProcOdtDis:1;               ///< Processor on-die termination disable
+  UINT32 DcqBypassMax:4;             ///< DRAM controller queue bypass maximum
+  UINT32 FourActWindow:4;            ///< Four bank activate window
+} DRAM_CFG_HI_REGISTER;
+
+
+/* Extended Memory Controller Configuration Low Register F2x1B0 */
+#define EXT_MEMCTRL_CFG_LOW_REG 0x1B0
+
+/// Extended Memory Controller Configuration Low PCI Register
+typedef struct {
+  UINT32 AdapPrefMissRatio:2;        ///< Adaptive prefetch miss ratio
+  UINT32 AdapPrefPositiveStep:2;     ///< Adaptive prefetch positive step
+  UINT32 AdapPrefNegativeStep:2;     ///< Adaptive prefetch negative step
+  UINT32 :2;                         ///< Reserved
+  UINT32 CohPrefPrbLmt:3;            ///< Coherent prefetch probe limit
+  UINT32 DisIoCohPref:1;             ///< Disable coherent prefetched for IO
+  UINT32 EnSplitDctLimits:1;         ///< Split DCT write limits enable
+  UINT32 SpecPrefDis:1;              ///< Speculative prefetch disable
+  UINT32 SpecPrefMis:1;              ///< Speculative prefetch predict miss
+  UINT32 SpecPrefThreshold:3;        ///< Speculative prefetch threshold
+  UINT32 :4;                         ///< Reserved
+  UINT32 PrefFourConf:3;             ///< Prefetch four-ahead confidence
+  UINT32 PrefFiveConf:3;             ///< Prefetch five-ahead confidence
+  UINT32 DcqBwThrotWm:4;             ///< Dcq bandwidth throttle watermark
+} EXT_MEMCTRL_CFG_LOW_REGISTER;
+
+
+/* Scrub Rate Control Register F3x58 */
+#define SCRUB_RATE_CTRL_REG 0x58
+
+/// Scrub Rate Control PCI Register
+typedef struct {
+  UINT32 DramScrub:5;                ///< DRAM scrub rate
+  UINT32 :3;                         ///< Reserved
+  UINT32 L2Scrub:5;                  ///< L2 cache scrub rate
+  UINT32 :3;                         ///< Reserved
+  UINT32 DcacheScrub:5;              ///< Data cache scrub rate
+  UINT32 :3;                         ///< Reserved
+  UINT32 L3Scrub:5;                  ///< L3 cache scrub rate
+  UINT32 :3;                         ///< Reserved
+} SCRUB_RATE_CTRL_REGISTER;
+
+/* DRAM Scrub Address Low Register F3x5C */
+#define DRAM_SCRUB_ADDR_LOW_REG 0x5C
+
+/// DRAM Scrub Address Low PCI Register
+typedef struct {
+  UINT32 ScrubReDirEn:1;             ///< DRAM scrubber redirect enable
+  UINT32 :5;                         ///< Reserved
+  UINT32 ScrubAddrLo:26;             ///< DRAM scrubber address bits[31:6]
+} DRAM_SCRUB_ADDR_LOW_REGISTER;
+
+
+/* Hardware thermal control register F3x64 */
+#define HTC_REG 0x64
+#define HTC_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, HTC_REG))
+
+/// Hardware Thermal Control PCI Register
+typedef struct {
+  UINT32 HtcEn:1;                    ///< HTC Enable
+  UINT32 :3;                         ///< Reserved
+  UINT32 HtcAct:1;                   ///< HTC Active State
+  UINT32 HtcActSts:1;                ///< HTC Active Status
+  UINT32 PslApicHiEn:1;              ///< P-state limit higher APIC int enable
+  UINT32 PslApicLoEn:1;              ///< P-state limit lower APIC int enable
+  UINT32 :8;                         ///< Reserved
+  UINT32 HtcTmpLmt:7;                ///< HTC temperature limit
+  UINT32 HtcSlewSel:1;               ///< HTC slew-controlled temp select
+  UINT32 HtcHystLmt:4;               ///< HTC hysteresis
+  UINT32 HtcPstateLimit:3;           ///< HTC P-state limit select
+  UINT32 :1;                         ///< Reserved
+} HTC_REGISTER;
+
+
+/* Software thermal control register F3x68 */
+#define STC_REG 0x68
+
+/// Software Thermal Control PCI Register
+typedef struct {
+  UINT32 StcSbcTmpHiEn:1;            ///< STC SBC temperature high enable
+  UINT32 StcSbcTmpLoEn:1;            ///< STC SBC temperature low enable
+  UINT32 StcApcTmpHiEn:1;            ///< STC APIC temperature high enable
+  UINT32 StcApcTmpLoEn:1;            ///< STC APIC temperature low enable
+  UINT32 :1;                         ///< Reserved
+  UINT32 StcPstateEn:1;              ///< STC P-state enable
+  UINT32 StcTmpHiSts:1;              ///< STC temperature high status
+  UINT32 StcTmpLoSts:1;              ///< STC temperature low status
+  UINT32 :8;                         ///< Reserved
+  UINT32 StcTmpLmt:7;                ///< STC temperature limit
+  UINT32 StcSlewSel:1;               ///< STC slew-controlled temp select
+  UINT32 StcHystLmt:4;               ///< STC hysteresis
+  UINT32 StcPstateLimit:3;           ///< STC P-state limit select
+  UINT32 :1;                         ///< Reserved
+} STC_REGISTER;
+
+/* ACPI Power State Control Registers F3x84:80 */
+
+/// System Management Action Field (SMAF) Register
+typedef struct {
+  UINT8 CpuPrbEn:1;                  ///< CPU direct probe enable
+  UINT8 NbLowPwrEn:1;                ///< Northbridge low-power enable
+  UINT8 NbGateEn:1;                  ///< Northbridge gate enable
+  UINT8 NbCofChg:1;                  ///< NbCofChg
+  UINT8 AltVidEn:1;                  ///< alternate VID enable
+  UINT8 ClkDivisor:3;                ///< Clock divisor
+} SMAF_REGISTER;
+
+/// union type for ACPI State SMAF setting
+typedef union {
+  UINT8 SMAFValue;                   ///< SMAF raw value
+  SMAF_REGISTER SMAF;                ///< SMAF structure
+} ACPI_STATE_SMAF;
+
+/// ACPI Power State Control Register F3x80
+typedef struct {
+  ACPI_STATE_SMAF C2;                ///< [7:0]   SMAF Code 000b - C2
+  ACPI_STATE_SMAF C3C1eLinkInit;     ///< [15:8]  SMAF Code 001b - C3, C1e or Link init
+  ACPI_STATE_SMAF FidVidChg;         ///< [23:16] SMAF Code 010b - FIDVID Change
+  ACPI_STATE_SMAF S1;                ///< [31:24] SMAF Code 011b - S1
+} ACPI_PSC_0_REGISTER;
+
+/// ACPI Power State Control Register F3x84
+typedef struct {
+  ACPI_STATE_SMAF S3;                 ///< [7:0]   SMAF Code 100b - S3
+  ACPI_STATE_SMAF Throttling;         ///< [15:8]  SMAF Code 101b - Throttling
+  ACPI_STATE_SMAF S4S5;               ///< [23:16] SMAF Code 110b - S4/S5
+  ACPI_STATE_SMAF C1;                 ///< [31:24] SMAF Code 111b - C1
+} ACPI_PSC_4_REGISTER;
+
+
+/* Power Control Miscellaneous Register F3xA0 */
+#define PW_CTL_MISC_REG 0xA0
+#define PW_CTL_MISC_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, PW_CTL_MISC_REG))
+
+/// Power Control Miscellaneous PCI Register
+typedef struct {
+  UINT32 PsiVid:7;                   ///< PSI_L VID threshold
+  UINT32 PsiVidEn:1;                 ///< PSI_L VID enable
+  UINT32 PviMode:1;                  ///< Parallel VID interface mode
+  UINT32 SviHighFreqSel:1;           ///< SVI high frequency select
+  UINT32 IdleExitEn:1;               ///< IDLEEXIT_L Enable
+  UINT32 PllLockTime:3;              ///< PLL synchronization lock time
+  UINT32 BpPinsTriEn:1;              ///< Breakpoint pins tristate enable
+  UINT32 :1;                         ///< Reserved
+  UINT32 PstateId:12;                ///< Pstate ID
+  UINT32 :1;                         ///< Reserved
+  UINT32 SlamVidMode:1;              ///< Slam voltage ID mode
+  UINT32 :1;                         ///< Reserved
+  UINT32 CofVidProg:1;               ///< COF and VID of Pstate programmed
+} POWER_CTRL_MISC_REGISTER;
+
+/* Popup P-state Register F3xA8 */
+#define POPUP_PSTATE_REG 0xA8
+#define POPUP_PSTATE_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, POPUP_PSTATE_REG))
+
+/// Popup P-state Register
+typedef struct {
+  UINT32 PopupEn:1;                  ///< Popup enable
+  UINT32 :1;                         ///< Reserved
+  UINT32 PopupPstate:3;              ///< Popup P-state
+  UINT32 PopupCpuVid:7;              ///< Popup core VID
+  UINT32 PopupCpuFid:6;              ///< Popup core FID
+  UINT32 PopupCpuDid:3;              ///< Popup core DID
+  UINT32 :6;                         ///< Reserved
+  UINT32 CacheFlushPopDownEn:1;      ///< Cache Flush PopDown P-state Enable
+  UINT32 :1;                         ///< Reserved
+  UINT32 PopDownPstate:3;            ///< Pop-down P-state number
+} POPUP_PSTATE_REGISTER;
+
+/* Clock Power/Timing Control 0 Register F3xD4 */
+#define CPTC0_REG 0xD4
+
+/// Clock Power Timing Control PCI Register
+typedef struct {
+  UINT32 NbFid:5;                    ///< NbFid
+  UINT32 NbFidEn:1;                  ///< NbFidEn
+  UINT32 :2;                         ///< Reserved
+  UINT32 ClkRampHystSel:4;           ///< Clock Ramp Hysteresis Select
+  UINT32 ClkRampHystCtl:1;           ///< Clock Ramp Hysteresis Control
+  UINT32 MTC1eEn:1;                  ///< Message Triggered C1e Enable
+  UINT32 CacheFlushImmOnAllHalt:1;   ///< Cache Flush Immediate on All Halt
+  UINT32 StutterScrubEn:1;           ///< Stutter Mode Scrub Enable
+  UINT32 LnkPllLock:2;               ///< Link PLL Lock
+  UINT32 :2;                         ///< Reserved
+  UINT32 PowerStepDown:4;            ///< Power Step Down
+  UINT32 PowerStepUp:4;              ///< Power Step Up
+  UINT32 NbClkDiv:3;                 ///< NbClkDiv
+  UINT32 NbClkDivApplyAll:1;         ///< NbClkDivApplyAll
+} CLK_PWR_TIMING_CTRL_REGISTER;
+
+
+/* Clock Power/Timing Control 1 Register F3xD8 */
+#define CPTC1_REG 0xD8
+
+/// Clock Power Timing Control 1 PCI Register
+typedef struct {
+  UINT32 VSSlamTime:3;               ///< Voltage stabilization slam time
+  UINT32 :1;                         ///< Reserved
+  UINT32 VSRampTime:3;               ///< Voltage stabilization ramp time
+  UINT32 :1;                         ///< Reserved
+  UINT32 TdpVid:7;                   ///< Thermal design power VID
+  UINT32 :1;                         ///< Reserved
+  UINT32 AltVidStart:7;              ///< Alternate VID start limit
+  UINT32 :1;                         ///< Reserved
+  UINT32 ReConDel:4;                 ///< Link reconnect delay
+  UINT32 PwrPlanes:1;                ///< Power planes
+  UINT32 :3;                         ///< Reserved
+} CLK_PWR_TIMING_CTRL1_REGISTER;
+
+
+/* Clock Power/Timing Control 2 Register F3xDC */
+#define CPTC2_REG 0xDC
+#define CPTC2_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, CPTC2_REG))
+/// Clock Power Timing Control 2 PCI Register
+typedef struct {
+  UINT32 AltVid:7;                   ///< Alternate VID
+  UINT32 :1;                         ///< Reserved
+  UINT32 PstateMaxVal:3;             ///< P-state maximum value
+  UINT32 :1;                         ///< Reserved
+  UINT32 NbsynPtrAdj:3;              ///< NB/Core sync FIFO ptr adjust
+  UINT32 :1;                         ///< Reserved
+  UINT32 CacheFlushOnHaltCtl:3;      ///< Cache flush on halt control
+  UINT32 CacheFlushOnHaltTmr:7;      ///< Cache flush on halt timer
+  UINT32 :1;                         ///< Reserved
+  UINT32 SlamTimeMode:2;             ///< Slam time mode
+  UINT32 AltvidVSSlamTime:3;         ///< Altvid voltage stabilization slam time
+} CLK_PWR_TIMING_CTRL2_REGISTER;
+
+
+/* Northbridge Capabilities Register F3xE8 */
+#define NB_CAPS_REG 0xE8
+
+/// Northbridge Capabilities PCI Register
+typedef struct {
+  UINT32 DctDualCap:1;               ///< Two-channel DRAM capable
+  UINT32 DualNodeCap:1;              ///< Dual-node multi-processor capable
+  UINT32 EightNodeCap:1;             ///< Eight-node multi-processor capable
+  UINT32 EccCapable:1;               ///< ECC capable
+  UINT32 ChipkillCapable:1;          ///< Chipkill ECC capable
+  UINT32 DdrMaxRate:3;               ///< Maximum DRAM data rate
+  UINT32 MctCap:1;                   ///< Memory controller capable
+  UINT32 SvmCapable:1;               ///< SVM capable
+  UINT32 HtcCapable:1;               ///< HTC capable
+  UINT32 LnkRtryCap:1;               ///< Link error-retry capable
+  UINT32 CmpCapLo:2;                 ///< CMP capable[1:0]
+  UINT32 MultiVidPlaneCap:1;         ///< Multiple VID plane capable
+  UINT32 CmpCapHi:1;                 ///< CMP capable[2]
+  UINT32 MpCap:3;                    ///< MP capability
+  UINT32 :1;                         ///< Reserved
+  UINT32 UnGangEn:4;                 ///< Link unganging enabled
+  UINT32 :1;                         ///< Reserved
+  UINT32 L3Capable:1;                ///< L3 capable
+  UINT32 HtAcCapable:1;              ///< HT AC capable
+  UINT32 :2;                         ///< Reserved
+  UINT32 MultiNodeCpu:1;             ///< Multinode processor
+  UINT32 IntNodeNum:2;               ///< Internal node number
+} NB_CAPS_REGISTER;
+
+
+/* NB Extended Configuration Low Register F3x188 */
+#define NB_EXT_CFG_LO_REG 0x188
+
+/// Northbridge Extended Configuration Low PCI Register
+typedef struct {
+  UINT32 :4;                         ///< Reserved
+  UINT32 EnStpGntOnFlushMaskWakeup:1; ///< Enable stop grant on flush mask wakeup
+  UINT32 :27;                        ///< Reserved
+} NB_EXT_CFG_LO_REGISTER;
+
+
+/* L3 Cache Parameter Register F3x1C4 */
+#define L3_CACHE_PARAM_REG 0x1C4
+
+/// L3 Cache Parameter PCI Register
+typedef struct {
+  UINT32 L3SubcacheSize0:1;          ///< L3 subcache size 0
+  UINT32 :3;                         ///< Reserved
+  UINT32 L3SubcacheSize1:1;          ///< L3 subcache size 1
+  UINT32 :3;                         ///< Reserved
+  UINT32 L3SubcacheSize2:2;          ///< L3 subcache size 2
+  UINT32 :2;                         ///< Reserved
+  UINT32 L3SubcacheSize3:2;          ///< L3 subcache size 3
+  UINT32 :17;                        ///< Reserved
+  UINT32 L3TagInit:1;                ///< L3 tag initialization
+} L3_CACHE_PARAM_REGISTER;
+
+
+/* Probe Filter Control Register F3x1D4 */
+#define PROBE_FILTER_CTRL_REG 0x1D4
+
+/// Probe Filter Control PCI Register
+typedef struct {
+  UINT32 PFMode:2;                   ///< Probe Filter Mode
+  UINT32 PFWayNum:2;                 ///< Probe Filter way number
+  UINT32 PFSubCacheSize0:2;          ///< Probe filter subcache 0 size
+  UINT32 PFSubCacheSize1:2;          ///< Probe filter subcache 1 size
+  UINT32 PFSubCacheSize2:2;          ///< Probe filter subcache 2 size
+  UINT32 PFSubCacheSize3:2;          ///< Probe filter subcache 3 size
+  UINT32 PFSubCacheEn:4;             ///< Probe filter subcache enable
+  UINT32 :3;                         ///< Reserved
+  UINT32 PFInitDone:1;               ///< Probe filter initialization done
+  UINT32 PFPreferredSORepl:2;        ///< PF preferredSO replacement mode
+  UINT32 PFErrInt:2;                 ///< Probe filter error interrupt type
+  UINT32 PFErrIntLvtOff:4;           ///< Probe filter error interrupt LVT offset
+  UINT32 PFEccError:1;               ///< Probe filter ECC error
+  UINT32 PFLoIndexHashEn:1;          ///< Probe filter low index hash enable
+  UINT32 :2;                         ///< Reserved
+} PROBE_FILTER_CTRL_REGISTER;
+
+
+/* Product Info Register F3x1FC */
+#define PRCT_INFO_REG 0x1FC
+#define PRCT_INFO_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, PRCT_INFO_REG))
+
+/// Product Information PCI Register
+typedef struct {
+  UINT32 NbCofVidUpdate:1;           ///< NbCofVidUpdate
+  UINT32 NbVidUpdateAll:1;           ///< NbVidUpdateAll
+  UINT32 SinglePlaneNbFid:5;         ///< SinglePlaneNbFid
+  UINT32 SinglePlaneNbVid:7;         ///< SinglePlaneNbVid
+  UINT32 DualPlaneNbFidOff:3;        ///< DualPlaneNbFidOff
+  UINT32 DualPlaneNbVidOff:5;        ///< DualPlaneNbVidOff
+  UINT32 SinglePlaneNbIdd:4;         ///< SinglePlaneNbIdd
+} PRODUCT_INFO_REGISTER;
+
+/* Core Performance Boost Control Register D18F4x15C */
+#define CPB_CTRL_REG 0x15C
+#define CPB_CTRL_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, CPB_CTRL_REG))
+
+/// Core Performance Boost Control Register
+typedef struct {
+  UINT32 BoostSrc:2;                 ///< Boost source
+  UINT32 NumBoostStates:1;           ///< Number of boosted states
+  UINT32 :27;                        ///< Reserved
+  UINT32 BoostLock:1;                ///< Boost Lock
+} CPB_CTRL_REGISTER;
+#endif /* _CPUF10POWERMGMT_H */
+
+/* Boost Offset Register F3x10C */
+#define F3x10C_REG 0x10C
+#define F3x10C_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, F3x10C_REG))
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerMgmtSystemTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerMgmtSystemTables.c
new file mode 100644
index 0000000000..866c10bc80
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerMgmtSystemTables.c
@@ -0,0 +1,182 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Power Management related stuff
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPowerMgmtSystemTables.h"
+#include "cpuF10EarlyInit.h"
+#include "cpuF10SoftwareThermal.h"
+#include "cpuF10PowerPlane.h"
+#include "cpuF10PowerCheck.h"
+#include "F10PmNbCofVidInit.h"
+#include "F10PmNbPstateInit.h"
+#include "F10PmAsymBoostInit.h"
+#include "F10PmDualPlaneOnlySupport.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10POWERMGMTSYSTEMTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GetF10SysPmTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **SysPmTblPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*  Family 10h Only Table */
+/* ---------------------- */
+CONST SYS_PM_TBL_STEP ROMDATA CpuF10SysPmTableArray[] =
+{
+  IDS_INITIAL_F10_PM_STEP
+
+  // Step 1 - Configure F3x[84:80].  Handled by PCI register table.
+  // Step 2 - Configure Northbridge COF and VID.
+  //   Execute both cold & warm
+  {
+    0,
+    F10PmNbCofVidInit
+  },
+
+  // Step 3 - Dual-plane Only Support.
+   {
+    PM_EXEFLAGS_WARM_ONLY,                            // ExeFlags
+    F10PmDualPlaneOnlySupport
+  },
+
+  // Step 4 - Asymmetric Boost.
+  //   Execute only after warm reset
+  {
+    PM_EXEFLAGS_WARM_ONLY,                            // ExeFlags
+    F10PmAsymBoostInit
+  },
+
+  // Step 5 - Configure Nb-Pstates.
+  //   Execute only after warm reset
+  {
+    PM_EXEFLAGS_WARM_ONLY,                            // ExeFlags
+    F10PmNbPstateInit
+  },
+  // Step 6 - Power Plane Initialization
+  //   Execute both cold & warm
+  {
+    0,                                                // ExeFlags
+    F10CpuAmdPmPwrPlaneInit                           // Function Pointer
+  },
+
+  // Step 7 - Pmin Transition After Reset
+  //   Execute only after warm reset
+  {
+    PM_EXEFLAGS_WARM_ONLY,                            // ExeFlags
+    F10PmAfterReset                             // Function Pointer
+  },
+
+  // Step 8 - Current Delivery Check
+  //   Execute only after warm reset
+  {
+    PM_EXEFLAGS_WARM_ONLY,                            // ExeFlags
+    F10PmPwrCheck                               // Function Pointer
+  },
+
+  // Step x - Software Thermal Control Init
+  //   Execute only after warm reset
+  {
+    PM_EXEFLAGS_WARM_ONLY,                            // ExeFlags
+    F10PmThermalInit                            // Function Pointer
+  },
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the appropriate table of steps to perform to initialize the power management
+ *  subsystem.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  SysPmTblPtr              Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10SysPmTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **SysPmTblPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = (sizeof (CpuF10SysPmTableArray) / sizeof (SYS_PM_TBL_STEP));
+  *SysPmTblPtr = CpuF10SysPmTableArray;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerPlane.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerPlane.c
new file mode 100644
index 0000000000..39a17be7af
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerPlane.c
@@ -0,0 +1,485 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Power Plane Initialization
+ *
+ * Performs the "BIOS Requirements for Power Plane Initialization" as described
+ * in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF10Utilities.h"
+#include "cpuF10PowerPlane.h"
+#include "Table.h"
+#include "F10PackageType.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10POWERPLANE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+// Register encodings for F3xD4[PowerStepUp/PowerStepDown]
+CONST UINT16 ROMDATA PowerStepEncodings[16] =
+{
+  400,    // 0000b: 400ns
+  300,    // 0001b: 300ns
+  200,    // 0010b: 200ns
+  100,    // 0011b: 100ns
+  90,     // 0100b: 90ns
+  80,     // 0101b: 80ns
+  70,     // 0110b: 70ns
+  60,     // 0111b: 60ns
+  50,     // 1000b: 50ns
+  45,     // 1001b: 45ns
+  40,     // 1010b: 40ns
+  35,     // 1011b: 35ns
+  30,     // 1100b: 30ns
+  25,     // 1101b: 25ns
+  20,     // 1110b: 20ns
+  15      // 1111b: 15ns
+};
+
+// Register encodings for F3xDC[AltvidVSSlamTime]
+CONST UINT32 ROMDATA AltvidSlamTime[8] =
+{
+  0,    // 000b: <1us
+  10,   // 001b: 10us
+  20,   // 010b: 20us
+  40,   // 011b: 40us
+  50,   // 100b: 50us
+  70,   // 101b: 70us
+  80,   // 110b: 80us
+  90    // 111b: 90us
+};
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F10PmPwrPlaneInitPviCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT32
+STATIC
+F10CalculateAltvidVSSlamTimeOnCore (
+  IN       BOOLEAN PviModeFlag,
+  IN       PCI_ADDR *PciAddress,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+F10PmVrmLowPowerModeEnable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       PCI_ADDR              PciAddress,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 10h core 0 entry point for performing power plane initialization.
+ *
+ * The steps are as follows:
+ *    1. If single plane, program lower VID code of CpuVid & NbVid for all
+ *       enabled P-States.
+ *    2. Configure F3xA0[SlamMode] & F3xD8[VsRampTime & VsSlamTime] based on
+ *       platform requirements.
+ *    3. Configure F3xD4[PowerStepUp & PowerStepDown]
+ *    4. Optionally configure F3xA0[PsiVidEn & PsiVid]
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParams          Service parameters
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F10CpuAmdPmPwrPlaneInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  BOOLEAN   PviModeFlag;
+  PCI_ADDR  PciAddress;
+  UINT16    PowerStepTime;
+  UINT32    PowerStepEncoded;
+  UINT32    LocalPciRegister;
+  UINT32    VsSlamTime;
+  UINT32    Socket;
+  UINT32    Module;
+  UINT32    Core;
+  UINT32    NumOfCores;
+  UINT32    LowCore;
+  UINT32    AndMask;
+  UINT32    OrMask;
+  UINT32    ProcessorPackageType;
+  UINT64    LocalMsrRegister;
+  AP_TASK   TaskPtr;
+  AGESA_STATUS  IgnoredSts;
+  PLATFORM_FEATS Features;
+  CPU_LOGICAL_ID LogicalId;
+
+  // Initialize the union
+  Features.PlatformValue = 0;
+  GetPlatformFeatures (&Features, &CpuEarlyParams->PlatformConfig, StdHeader);
+
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+  GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+
+  ASSERT (Core == 0);
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+
+  // Set SlamVidMode
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = PW_CTL_MISC_REG;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  AndMask = 0xFFFFFFFF;
+  OrMask = 0x00000000;
+  if (((POWER_CTRL_MISC_REGISTER *) &LocalPciRegister)->PviMode == 1) {
+    PviModeFlag = TRUE;
+    ((POWER_CTRL_MISC_REGISTER *) &AndMask)->SlamVidMode = 0;
+
+    // Have all single plane cores adjust their NB and CPU VID fields
+    TaskPtr.FuncAddress.PfApTask = F10PmPwrPlaneInitPviCore;
+    TaskPtr.DataTransfer.DataSizeInDwords = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParams);
+
+  } else {
+    PviModeFlag = FALSE;
+    ((POWER_CTRL_MISC_REGISTER *) &OrMask)->SlamVidMode = 1;
+  }
+  OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+
+  F10ProgramVSSlamTimeOnSocket (&PciAddress, CpuEarlyParams, StdHeader);
+
+  // Configure PowerStepUp/PowerStepDown
+  PciAddress.Address.Register = CPTC0_REG;
+  if ((Features.PlatformFeatures.PlatformSingleLink == 1) ||
+      (Features.PlatformFeatures.PlatformUma == 1) ||
+      (Features.PlatformFeatures.PlatformUmaIfcm == 1) ||
+      (Features.PlatformFeatures.PlatformIfcm == 1) ||
+      (Features.PlatformFeatures.PlatformIommu == 1)) {
+    PowerStepEncoded = 0x8;
+  } else {
+    GetGivenModuleCoreRange ((UINT32) Socket,
+                             (UINT32) Module,
+                             &LowCore,
+                             &NumOfCores,
+                             StdHeader);
+    NumOfCores = ((NumOfCores - LowCore) + 1);
+    PowerStepTime = (UINT16) (400 / NumOfCores);
+    for (PowerStepEncoded = 0xF; PowerStepEncoded > 0; PowerStepEncoded--) {
+      if (PowerStepTime <= PowerStepEncodings[PowerStepEncoded]) {
+        break;
+      }
+    }
+  }
+  AndMask = 0xFFFFFFFF;
+  ((CLK_PWR_TIMING_CTRL_REGISTER *) &AndMask)->PowerStepUp = 0;
+  ((CLK_PWR_TIMING_CTRL_REGISTER *) &AndMask)->PowerStepDown = 0;
+  OrMask = 0x00000000;
+  ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->PowerStepUp = PowerStepEncoded;
+  ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->PowerStepDown = PowerStepEncoded;
+  OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+
+  if ((LogicalId.Revision & AMD_F10_C3) != 0) {
+    // Set up Pop up P-state register
+    PciAddress.Address.Register = CPTC2_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    AndMask = 0xFFFFFFFF;
+    ((POPUP_PSTATE_REGISTER *) &AndMask)->PopupPstate = 0;
+    ((POPUP_PSTATE_REGISTER *) &AndMask)->PopupCpuVid = 0;
+    ((POPUP_PSTATE_REGISTER *) &AndMask)->PopupCpuFid = 0;
+    ((POPUP_PSTATE_REGISTER *) &AndMask)->PopupCpuDid = 0;
+    OrMask = 0x00000000;
+    ((POPUP_PSTATE_REGISTER *) &OrMask)->PopupEn = 0;
+    ((POPUP_PSTATE_REGISTER *) &OrMask)->PopupPstate = ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal;
+    LibAmdMsrRead ((((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal + PS_REG_BASE), &LocalMsrRegister, StdHeader);
+    ((POPUP_PSTATE_REGISTER *) &OrMask)->PopupCpuVid = (UINT32) ((PSTATE_MSR *) &LocalMsrRegister)->CpuVid;
+    ((POPUP_PSTATE_REGISTER *) &OrMask)->PopupCpuFid = (UINT32) ((PSTATE_MSR *) &LocalMsrRegister)->CpuFid;
+    ((POPUP_PSTATE_REGISTER *) &OrMask)->PopupCpuDid = (UINT32) ((PSTATE_MSR *) &LocalMsrRegister)->CpuDid;
+    PciAddress.Address.Register = POPUP_PSTATE_REG;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+
+    // Set AltVidStart
+    PciAddress.Address.Register = CPTC1_REG;
+    AndMask = 0xFFFFFFFF;
+    ((CLK_PWR_TIMING_CTRL1_REGISTER *) &AndMask)->AltVidStart = 0;
+    OrMask = 0x00000000;
+    ((CLK_PWR_TIMING_CTRL1_REGISTER *) &OrMask)->AltVidStart = (UINT32) ((PSTATE_MSR *) &LocalMsrRegister)->CpuVid;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+
+    // Set up Altvid slam time
+    ProcessorPackageType = LibAmdGetPackageType (StdHeader);
+    PciAddress.Address.Register = CPTC2_REG;
+    VsSlamTime = F10CalculateAltvidVSSlamTimeOnCore (PviModeFlag, &PciAddress, CpuEarlyParams, StdHeader);
+    AndMask = 0xFFFFFFFF;
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &AndMask)->AltvidVSSlamTime = 0;
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &AndMask)->SlamTimeMode = 0;
+    OrMask = 0x00000000;
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &OrMask)->AltvidVSSlamTime = VsSlamTime;
+    if (ProcessorPackageType == PACKAGE_TYPE_S1G3_S1G4 || ProcessorPackageType == PACKAGE_TYPE_ASB2) {
+      // If CPUID Fn8000_0001_EBX[PkgType]=0010b or 0100b, BIOS should program this to 10b;
+      // else BIOS should leave this field at 00b.
+      ((CLK_PWR_TIMING_CTRL2_REGISTER *) &OrMask)->SlamTimeMode = 2;
+    }
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+  }
+
+  if (IsWarmReset (StdHeader) && !PviModeFlag) {
+    // Configure PsiVid
+    F10PmVrmLowPowerModeEnable (FamilySpecificServices, CpuEarlyParams, PciAddress, StdHeader);
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F10CpuAmdPmPwrPlaneInit.
+ *
+ * This function implements step 1 on each core.
+ *
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F10PmPwrPlaneInitPviCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 MsrAddr;
+  UINT32 NbVid;
+  UINT32 CpuVid;
+  UINT64 LocalMsrRegister;
+
+  for (MsrAddr = PS_REG_BASE; MsrAddr <= PS_MAX_REG; MsrAddr++) {
+    LibAmdMsrRead (MsrAddr, &LocalMsrRegister, StdHeader);
+    if (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == (UINT64) 1) {
+      NbVid = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->NbVid);
+      CpuVid = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->CpuVid);
+      if (NbVid != CpuVid) {
+        if (NbVid > CpuVid) {
+          NbVid = CpuVid;
+        }
+        ((PSTATE_MSR *) &LocalMsrRegister)->NbVid = NbVid;
+        ((PSTATE_MSR *) &LocalMsrRegister)->CpuVid = NbVid;
+        LibAmdMsrWrite (MsrAddr, &LocalMsrRegister, StdHeader);
+      }
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the encoded altvid voltage stabilization slam time for the executing
+ * family 10h core.
+ *
+ * This function calculates how much time it will take for the voltage to
+ * stabilize when transitioning from altvid to Pmin, and returns the necessary
+ * encoded value for the amount of time discovered.
+ *
+ * @param[in]  PviModeFlag        Whether or not the platform uses VRMs that
+ *                                employ the parallel VID interface.
+ * @param[in]  PciAddress         Full PCI address of the executing core's config space.
+ * @param[in]  CpuEarlyParams     Service parameters
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ * @retval     Encoded register value.
+ *
+ */
+UINT32
+STATIC
+F10CalculateAltvidVSSlamTimeOnCore (
+  IN       BOOLEAN PviModeFlag,
+  IN       PCI_ADDR *PciAddress,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8     NbVid;
+  UINT8     AltVidCode;
+  UINT8     PminVidCode;
+  UINT32    MsrAddr;
+  UINT32    LocalPciRegister;
+  UINT64    LocalMsrRegister;
+  PCI_ADDR  LocalPciAddress;
+
+  // Calculate Slam Time
+  //   VSSlamTime = 0.4us/mV (or 0.2us/mV) * Vpmin - Altvid
+  //   In our case, we will scale the values by 100 to avoid
+  //   decimals.
+
+  // Get Pmin's index
+  LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &LocalMsrRegister, StdHeader);
+  MsrAddr = (UINT32) ((((PSTATE_CURLIM_MSR *) &LocalMsrRegister)->PstateMaxVal) + PS_REG_BASE);
+
+  // Get Pmin's VID
+  LibAmdMsrRead (MsrAddr, &LocalMsrRegister, StdHeader);
+  PminVidCode = (UINT8) (((PSTATE_MSR *) &LocalMsrRegister)->CpuVid);
+
+  // If SVI, we only care about CPU VID.
+  // If PVI, determine the higher voltage b/t NB and CPU
+  if (PviModeFlag) {
+    NbVid = (UINT8) (((PSTATE_MSR *) &LocalMsrRegister)->NbVid);
+    if (PminVidCode > NbVid) {
+      PminVidCode = NbVid;
+    }
+  }
+
+  // Get Alt VID
+  LocalPciAddress.AddressValue = PciAddress->AddressValue;
+  LocalPciAddress.Address.Function = FUNC_3;
+  LocalPciAddress.Address.Register = CPTC2_REG;
+  LibAmdPciRead (AccessWidth32, LocalPciAddress, &LocalPciRegister, StdHeader);
+  AltVidCode = (UINT8) (((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->AltVid);
+
+  return (F10GetSlamTimeEncoding (PminVidCode, AltVidCode, CpuEarlyParams, AltvidSlamTime, StdHeader));
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Sets up PSI_L operation.
+ *
+ * This function implements the LowPowerThreshold parameter.
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParams          Contains VrmLowPowerThreshold parameter.
+ * @param[in]  PciAddress              PCI address of the executing core's config space.
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F10PmVrmLowPowerModeEnable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       PCI_ADDR              PciAddress,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT32    Pstate;
+  UINT32    PstateCurrent;
+  UINT32    NextPstateCurrent;
+  UINT32    AndMask;
+  UINT32    OrMask;
+  UINT32    PreviousVID;
+  UINT32    PstateVID;
+  UINT32    HwPsMaxVal;
+  UINT64    PstateMsr;
+  BOOLEAN   EnablePsi;
+
+  if (CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].LowPowerThreshold != 0) {
+    EnablePsi = FALSE;
+    PreviousVID = 0x7F;           // Initialize to invalid zero volt VID code
+    PstateVID = 0x7F;
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = CPTC2_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &HwPsMaxVal, StdHeader);
+
+    for (Pstate = 0; Pstate <= (UINT32) ((CLK_PWR_TIMING_CTRL2_REGISTER *) &HwPsMaxVal)->PstateMaxVal; Pstate++) {
+      if (FamilySpecificServices->GetProcIddMax (FamilySpecificServices, (UINT8) Pstate, &PstateCurrent, StdHeader)) {
+        LibAmdMsrRead ((UINT32) (Pstate + PS_REG_BASE), &PstateMsr, StdHeader);
+        PstateVID = (UINT32) (((PSTATE_MSR *) &PstateMsr)->CpuVid);
+        if ((Pstate + 1) > (UINT32) ((CLK_PWR_TIMING_CTRL2_REGISTER *) &HwPsMaxVal)->PstateMaxVal) {
+          NextPstateCurrent = 0;
+        } else if (FamilySpecificServices->GetProcIddMax (FamilySpecificServices, (UINT8) (Pstate + 1), &NextPstateCurrent, StdHeader)) {
+          NextPstateCurrent = CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].InrushCurrentLimit + NextPstateCurrent;
+        }
+        if ((PstateCurrent <= CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].LowPowerThreshold) && (NextPstateCurrent <= CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].LowPowerThreshold) && (PstateVID != PreviousVID)) {
+          EnablePsi = TRUE;
+          break;
+        }
+        PreviousVID = PstateVID;
+      }
+    }
+
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = PW_CTL_MISC_REG;
+    AndMask = 0xFFFFFFFF;
+    OrMask = 0x00000000;
+    ((POWER_CTRL_MISC_REGISTER *) &AndMask)->PsiVid = 0;
+    if (EnablePsi) {
+      ((POWER_CTRL_MISC_REGISTER *) &OrMask)->PsiVid = PstateVID;
+      ((POWER_CTRL_MISC_REGISTER *) &OrMask)->PsiVidEn = 1;
+    } else {
+      ((POWER_CTRL_MISC_REGISTER *) &AndMask)->PsiVidEn = 0;
+    }
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerPlane.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerPlane.h
new file mode 100644
index 0000000000..d909532cb0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10PowerPlane.h
@@ -0,0 +1,77 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Power Plane related functions and structures
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F10_POWER_PLANE_H_
+#define _CPU_F10_POWER_PLANE_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F10CpuAmdPmPwrPlaneInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F10_POWER_PLANE_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Pstate.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Pstate.c
new file mode 100644
index 0000000000..c8b54e2e94
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Pstate.c
@@ -0,0 +1,894 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Pstate feature support functions.
+ *
+ * Provides the functions necessary to initialize the Pstate feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuPstateTables.h"
+#include "Table.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFamRegisters.h"
+#include "cpuF10Utilities.h"
+#include "cpuF10PowerMgmt.h"
+#include "CommonReturns.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10PSTATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+F10GetPstateTransLatency (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       PSTATE_LEVELING        *PStateLevelingBufferStructPtr,
+  IN       PCI_ADDR               *PciAddress,
+     OUT   UINT32                 *TransitionLatency,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+AGESA_STATUS
+F10GetPstateFrequency (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+F10PstateLevelingCoreMsrModify (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       S_CPU_AMD_PSTATE   *CpuAmdPState,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+AGESA_STATUS
+F10GetPstatePower (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *PowerInMw,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+F10GetPstateMaxState (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+     OUT   UINT32              *MaxPStateNumber,
+     OUT   UINT8               *NumberOfBoostStates,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+AGESA_STATUS
+F10GetPstateRegisterInfo (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT32              PState,
+     OUT   BOOLEAN             *PStateEnabled,
+  IN OUT   UINT32              *IddVal,
+  IN OUT   UINT32              *IddDiv,
+     OUT   UINT32              *SwPstateNumber,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+VOID
+STATIC
+F10GetPowerStepValueInTime (
+  IN OUT   UINT32  *PowerStepPtr
+  );
+
+VOID
+STATIC
+F10GetPllValueInTime (
+  IN OUT   UINT32  *PllLockTimePtr
+  );
+
+AGESA_STATUS
+STATIC
+F10GetFrequencyXlatRegInfo (
+  IN       PSTATE_CPU_FAMILY_SERVICES  *PstateCpuServices,
+  IN       UINT8                  PStateNumber,
+  IN       UINT32                 Frequency,
+     OUT   UINT32                 *CpuFidPtr,
+     OUT   UINT32                 *CpuDidPtr1,
+     OUT   UINT32                 *CpuDidPtr2,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if Pstate PSD is dependent.
+ *
+ * @param[in]     PstateCpuServices  Pstate CPU services.
+ * @param[in,out] PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]     StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               PSD is dependent.
+ * @retval       FALSE              PSD is independent.
+ *
+ */
+BOOLEAN
+STATIC
+F10IsPstatePsdDependent (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN OUT   PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPU_LOGICAL_ID         CpuLogicalId;
+  PLATFORM_FEATS         Features;
+
+  // Initialize the union
+  Features.PlatformValue = 0;
+  GetLogicalIdOfCurrentCore (&CpuLogicalId, StdHeader);
+  GetPlatformFeatures (&Features, PlatformConfig, StdHeader);
+
+  //
+  // RevC and later Single link has PSD option, default is dependent.
+  // If multi-link, always return independent.
+  //
+  if ((Features.PlatformFeatures.PlatformSingleLink) && ((CpuLogicalId.Revision & AMD_F10_GT_Bx) != 0)) {
+    if (PlatformConfig->ForcePstateIndependent) {
+      return FALSE;
+    }
+    return TRUE;
+  }
+  return FALSE;
+}
+
+/**
+ *  Family specific call to set core TscFreqSel.
+ *
+ * @param[in]     PstateCpuServices  Pstate CPU services.
+ * @param[in]     StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F10SetTscFreqSel (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64             MsrValue;
+
+  LibAmdMsrRead (MSR_HWCR, &MsrValue, StdHeader);
+  if (UserOptions.OptionMultisocket) {
+    //
+    // If Agesa need to do p-state leveling on multi-socket, changing the P0
+    // frequency after setting this bit has no effect on the TSC rate.
+    //
+    ASSERT ((MsrValue & BIT24) == 0);
+  }
+  MsrValue = MsrValue | BIT24;
+  LibAmdMsrWrite (MSR_HWCR, &MsrValue, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to get Pstate Transition Latency.
+ *
+ *  Calculate TransitionLatency by power step value and pll value.
+ *
+ *  @param[in]     PstateCpuServices                 Pstate CPU services.
+ *  @param[in]     PStateLevelingBufferStructPtr     Pstate row data buffer pointer
+ *  @param[in]     PciAddress                        Pci address
+ *  @param[out]    TransitionLatency                 The transition latency.
+ *  @param[in]     StdHeader                         Header for library and services
+ *
+ *  @retval      AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F10GetPstateTransLatency (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       PSTATE_LEVELING        *PStateLevelingBufferStructPtr,
+  IN       PCI_ADDR               *PciAddress,
+     OUT   UINT32                 *TransitionLatency,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32               TempVar_b;
+  UINT32               TempVar_c;
+  UINT32               TempVar_d;
+  UINT32               TempVar8_a;
+  UINT32               TempVar8_b;
+  UINT32               Ignored;
+  UINT32               k;
+  UINT32               CpuFidSameFlag;
+  UINT8                PStateMaxValueOnCurrentCore;
+  UINT32               TransAndBusMastLatency;
+
+  CpuFidSameFlag = 1;
+
+  F10GetFrequencyXlatRegInfo (
+    PstateCpuServices,
+    0,
+    PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateStruct[0].CoreFreq,
+    &TempVar_b,
+    &TempVar_c,
+    &Ignored,
+    StdHeader
+    );
+
+  TempVar_d = TempVar_b;
+  PStateMaxValueOnCurrentCore = PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateMaxValue;
+
+  //
+  //Check if MSRC001_00[68:64][CpuFid] is the same value for all P-states where
+  //MSRC001_00[68:64][PstateEn]=1
+  //
+  for (k = 1; k <= PStateMaxValueOnCurrentCore; k++) {
+    if (PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateStruct[k].PStateEnable != 0) {
+      F10GetFrequencyXlatRegInfo (
+        PstateCpuServices,
+        (UINT8) k,
+        PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateStruct[k].CoreFreq,
+        &TempVar_b,
+        &TempVar_c,
+        &Ignored,
+        StdHeader
+        );
+    }
+
+    if (TempVar_d != TempVar_b) {
+      CpuFidSameFlag = 0;
+      break;
+    }
+  }
+
+  PciAddress->Address.Register = 0xD4;
+  PciAddress->Address.Function = FUNC_3;
+  LibAmdPciRead (AccessWidth32, *PciAddress, &TempVar_d, StdHeader);
+
+  // PowerStepDown - Bits 20:23
+  TempVar8_a = (TempVar_d & 0x00F00000) >> 20;
+
+  // PowerStepUp   - Bits 24:27
+  TempVar8_b = (TempVar_d & 0x0F000000) >> 24;
+
+  // Convert the raw numbers in TempVar8_a and TempVar8_b into time
+  F10GetPowerStepValueInTime (&TempVar8_a);
+  F10GetPowerStepValueInTime (&TempVar8_b);
+
+  //
+  //(12 * (F3xD4[PowerStepDown] + F3xD4[PowerStepUp]) /1000) us
+  //
+  TransAndBusMastLatency =
+  (12 * (TempVar8_a + TempVar8_b) + 999) / 1000;
+
+  if (CpuFidSameFlag == 0) {
+    //
+    //+ F3xA0[PllLockTime]
+    //
+    PciAddress->Address.Register = 0xA0;
+    LibAmdPciRead (AccessWidth32, *PciAddress, &TempVar_d, StdHeader);
+
+    TempVar8_a = (0x00003800 & TempVar_d) >> 11;
+    F10GetPllValueInTime (&TempVar8_a);
+    TransAndBusMastLatency += TempVar8_a;
+  }
+
+  *TransitionLatency = TransAndBusMastLatency;
+
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to calculates the frequency in megahertz of the desired P-state.
+ *
+ *  @param[in]   PstateCpuServices        Pstate CPU services.
+ *  @param[in]   StateNumber              The P-State to analyze.
+ *  @param[out]  FrequencyInMHz           The P-State's frequency in MegaHertz
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      AGESA_SUCCESS   Always Succeeds.
+ */
+AGESA_STATUS
+F10GetPstateFrequency (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 TempValue;
+  UINT32 CpuDid;
+  UINT32 CpuFid;
+  UINT64 LocalMsrRegister;
+
+  ASSERT (StateNumber < NM_PS_REG);
+  LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+  ASSERT (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1);
+  CpuDid = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->CpuDid);
+  CpuFid = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->CpuFid);
+
+  switch (CpuDid) {
+  case 0:
+    TempValue = 1;
+    break;
+  case 1:
+    TempValue = 2;
+    break;
+  case 2:
+    TempValue = 4;
+    break;
+  case 3:
+    TempValue = 8;
+    break;
+  case 4:
+    TempValue  =  16;
+    break;
+  default:
+    // CpuDid is set to an undefined value.  This is due to either a misfused CPU, or
+    // an invalid P-state MSR write.
+    ASSERT (FALSE);
+    TempValue = 1;
+    break;
+  }
+  *FrequencyInMHz = (100 * (CpuFid + 0x10) / TempValue);
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to sets the Pstate MSR to each APs base on Pstate Buffer.
+ *
+ * @param[in]       PstateCpuServices        Pstate CPU services.
+ * @param[in]       CpuAmdPState             Gathered P-state data structure for whole system.
+ * @param[in]       StdHeader                Config for library and services.
+ *
+ * @retval          AGESA_SUCCESS            Always succeeds.
+ *
+ */
+AGESA_STATUS
+F10PstateLevelingCoreMsrModify (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       S_CPU_AMD_PSTATE   *CpuAmdPState,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32             i;
+  UINT32             Ignored;
+  UINT32             k;
+  UINT32             TempVar_d;
+  UINT32             TempVar_e;
+  UINT32             TempVar_f;
+  UINT32             LogicalSocketCount;
+  UINT32             LocalPciRegister;
+  UINT32             Socket;
+  UINT32             Module;
+  UINT32             Core;
+  UINT64             MsrValue;
+  AGESA_STATUS       Status;
+  PSTATE_LEVELING    *PStateBufferPtr;
+  PSTATE_LEVELING    *PStateBufferPtrTmp;
+  S_CPU_AMD_PSTATE   *CpuAmdPstatePtr;
+  PCI_ADDR           PciAddress;
+  CPU_SPECIFIC_SERVICES   *FamilySpecificServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  ASSERT (FamilySpecificServices != NULL);
+
+  Ignored = 0;
+  CpuAmdPstatePtr = (S_CPU_AMD_PSTATE *) CpuAmdPState;
+  PStateBufferPtrTmp = CpuAmdPstatePtr->PStateLevelingStruc;
+  PStateBufferPtr = CpuAmdPstatePtr->PStateLevelingStruc;
+  LogicalSocketCount = CpuAmdPstatePtr->TotalSocketInSystem;
+  PciAddress.AddressValue = 0;
+
+  //
+  //Try to find the Pstate buffer specific to this core(socket).
+  //
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &Status);
+  for (i = 0; i < LogicalSocketCount; i++) {
+    CpuGetPStateLevelStructure (&PStateBufferPtrTmp, CpuAmdPstatePtr, i, StdHeader);
+    if (PStateBufferPtrTmp->SocketNumber == Socket) {
+      break;
+    }
+  }
+
+  if (PStateBufferPtr[0].OnlyOneEnabledPState) {
+    //
+    //If all processors have only 1 enabled P-state, the following sequence should be performed on all cores:
+    //
+
+    //1. Write the appropriate CpuFid value resulting from the matched CPU COF to MSRC001_0064[CpuFid].
+    LibAmdMsrRead (MSR_PSTATE_0, &MsrValue, StdHeader);
+    Status = F10GetFrequencyXlatRegInfo (PstateCpuServices, 0, PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[0].CoreFreq, &TempVar_d, &TempVar_e, &Ignored, StdHeader);
+    // Bits 5:0
+    ((PSTATE_MSR *) &MsrValue)->CpuFid = TempVar_d;
+    // Bits 8:6
+    ((PSTATE_MSR *) &MsrValue)->CpuDid = TempVar_e;
+    // Bits 39:32
+    ((PSTATE_MSR *) &MsrValue)->IddValue = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[0].IddValue;
+    // Bits 41:40
+    ((PSTATE_MSR *) &MsrValue)->IddDiv = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[0].IddDiv;
+    // Enable the P-State
+    ((PSTATE_MSR *) &MsrValue)->PsEnable = 1;
+    LibAmdMsrWrite (MSR_PSTATE_0, &MsrValue, StdHeader);
+
+    //2. Copy MSRC001_0064 to MSRC001_0065.
+    LibAmdMsrWrite (MSR_PSTATE_1, &MsrValue, StdHeader);
+
+    //3. Write 001b to F3xDC[PstatemaxVal].
+    GetPciAddress (StdHeader, Socket, Module, &PciAddress, &Status);
+    PciAddress.Address.Register = CPTC2_REG;
+    PciAddress.Address.Function = FUNC_3;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal = 1;
+    LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+    //4. Write 001b to MSRC001_0062[PstateCmd].
+    FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) 1, (BOOLEAN) FALSE, StdHeader);
+
+    //5. Wait for MSRC001_0071[CurCpuFid] = MSRC001_0065[CpuFid].
+    do {
+      LibAmdMsrRead (MSR_COFVID_STS, &MsrValue, StdHeader);
+    } while (((COFVID_STS_MSR *) &MsrValue)->CurCpuFid != TempVar_d);
+
+    //6. Write 000b to MSRC001_0062[PstateCmd].
+    FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) 0, (BOOLEAN) FALSE, StdHeader);
+
+    //7. Wait for MSRC001_0071[CurCpuFid] = MSRC001_0064[CpuFid].
+    do {
+      LibAmdMsrRead (MSR_COFVID_STS, &MsrValue, StdHeader);
+    } while (((COFVID_STS_MSR *) &MsrValue)->CurCpuFid != TempVar_d);
+
+    //8. Write 0b to MSRC001_0065[PstateEn].
+    LibAmdMsrRead (MSR_PSTATE_1, &MsrValue, StdHeader);
+    ((PSTATE_MSR *) &MsrValue)->PsEnable = 0;
+    LibAmdMsrWrite (MSR_PSTATE_1, &MsrValue, StdHeader);
+
+    //9. Write 000b to F3xDC[PstateMaxVal] and exit the sequence (no further steps are required).
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal = 0;
+    LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+  } else {
+    TempVar_f = MSR_PSTATE_0;
+
+    for (k = 0; k <= PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue; k++, TempVar_f++) {
+      // If pState is not disabled then do update
+      LibAmdMsrRead (TempVar_f, &MsrValue, StdHeader);
+
+      if (PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].PStateEnable == 1) {
+        Status = F10GetFrequencyXlatRegInfo (PstateCpuServices, (UINT8) k, PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].CoreFreq, &TempVar_d, &TempVar_e, &Ignored, StdHeader);
+        if (Status != AGESA_ERROR) {
+          // Bits 5:0
+          ((PSTATE_MSR *) &MsrValue)->CpuFid = TempVar_d;
+          // Bits 8:6
+          ((PSTATE_MSR *) &MsrValue)->CpuDid = TempVar_e;
+        }
+
+        // Bits 39:32
+        ((PSTATE_MSR *) &MsrValue)->IddValue = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].IddValue;
+        // Bits 41:40
+        ((PSTATE_MSR *) &MsrValue)->IddDiv = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].IddDiv;
+        // Enable the P-State
+        ((PSTATE_MSR *) &MsrValue)->PsEnable = 1;
+        LibAmdMsrWrite (TempVar_f, &MsrValue, StdHeader);
+      } else {
+        // Disable the P-State
+        ((PSTATE_MSR *) &MsrValue)->PsEnable = 0;
+        LibAmdMsrWrite (TempVar_f, &MsrValue, StdHeader);
+      }
+    }
+  }
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to calculates the power in milliWatts of the desired P-state.
+ *
+ *  @param[in]   PstateCpuServices        Pstate CPU services.
+ *  @param[in]   StateNumber              Which P-state to analyze
+ *  @param[out]  PowerInMw                The Power in milliWatts of that P-State
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F10GetPstatePower (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *PowerInMw,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32  CpuVid;
+  UINT32  IddValue;
+  UINT32  IddDiv;
+  BOOLEAN PviFlag;
+  UINT32  V_x10000;
+  UINT32  Power;
+  PCI_ADDR PciAddress;
+  UINT32  TempVar_a;
+  UINT64  LocalMsrRegister;
+
+  ASSERT (StateNumber < NM_PS_REG);
+  LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+  ASSERT (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1);
+  CpuVid = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->CpuVid);
+  IddValue = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->IddValue);
+  IddDiv = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->IddDiv);
+
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = POWER_CTRL_MISCELLANEOUS_REG;
+  LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_a, StdHeader);
+  if ((TempVar_a & 0x00000100) != 0) {
+    PviFlag = TRUE;
+  } else {
+    PviFlag = FALSE;
+  }
+  if (PviFlag) {
+    // Set CpuVid value in case CPU is in PVI mode
+    if (CpuVid > 0x5D) {
+      CpuVid = 0x3F;
+    } else if (CpuVid > 0x3E) {
+      CpuVid = CpuVid - 0x1F;
+    } else {
+      CpuVid = (CpuVid >> 1);
+    }
+
+    // PVI Encoding
+    if (CpuVid >= 0x20) {
+      V_x10000 = 7625L - (125L * (CpuVid - 0x20));
+    } else {
+      V_x10000 = 15500L - (250L * CpuVid);
+    }
+  } else {
+    if (CpuVid >= 0x7C) {
+      V_x10000 = 0;
+    } else {
+      V_x10000 = 15500L - (125L * CpuVid);
+    }
+  }
+
+  Power = V_x10000 * IddValue;
+
+  switch (IddDiv) {
+  case 0:
+    *PowerInMw = Power / 10L;
+    break;
+  case 1:
+    *PowerInMw = Power / 100L;
+    break;
+  case 2:
+    *PowerInMw = Power / 1000L;
+    break;
+  default:
+    // IddDiv is set to an undefined value.  This is due to either a misfused CPU, or
+    // an invalid P-state MSR write.
+    ASSERT (FALSE);
+    *PowerInMw = 0;
+    break;
+  }
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to get CPU pstate max state.
+ *
+ *  @param[in]     PstateCpuServices      Pstate CPU services.
+ *  @param[out]    MaxPStateNumber        The max hw pstate value on the current socket.
+ *  @param[out]    NumberOfBoostStates    The number of boosted P-states on the current socket.
+ *  @param[in]     StdHeader              Handle of Header for calling lib functions and services.
+ *
+ *  @retval      AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F10GetPstateMaxState (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+     OUT   UINT32              *MaxPStateNumber,
+     OUT   UINT8               *NumberOfBoostStates,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT8                NumBoostStates;
+  UINT64               MsrValue;
+
+  NumBoostStates = F10GetNumberOfBoostedPstatesOnCore (StdHeader);
+  //
+  // Read PstateMaxVal [6:4] from MSR C001_0061
+  // So, we will know the max pstate state in this socket.
+  //
+  LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &MsrValue, StdHeader);
+  *MaxPStateNumber = (UINT32) (((PSTATE_CURLIM_MSR *) &MsrValue)->PstateMaxVal) + (UINT32) (NumBoostStates);
+  *NumberOfBoostStates = NumBoostStates;
+
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to get CPU pstate register information.
+ *
+ *  @param[in]     PstateCpuServices         Pstate CPU services.
+ *  @param[in]     PState                    Input Pstate number for query.
+ *  @param[out]    PStateEnabled             Boolean flag return pstate enable.
+ *  @param[in,out] IddVal                    Pstate current value.
+ *  @param[in,out] IddDiv                    Pstate current divisor.
+ *  @param[out]    SwPstateNumber            Software P-state number.
+ *  @param[in]     StdHeader                 Handle of Header for calling lib functions and services.
+ *
+ *  @retval      AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F10GetPstateRegisterInfo (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT32              PState,
+     OUT   BOOLEAN             *PStateEnabled,
+  IN OUT   UINT32              *IddVal,
+  IN OUT   UINT32              *IddDiv,
+     OUT   UINT32              *SwPstateNumber,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT8                NumBoostStates;
+  UINT64               LocalMsrRegister;
+
+  ASSERT (PState < NM_PS_REG);
+
+  // Check if CPB is supported. if yes, skip boosted p-state. The boosted p-state number = F4x15C[NumBoostStates].
+  NumBoostStates = F10GetNumberOfBoostedPstatesOnCore (StdHeader);
+
+  // Read PSTATE MSRs
+  LibAmdMsrRead (PS_REG_BASE + (UINT32) PState, &LocalMsrRegister, StdHeader);
+
+  if (PState < NumBoostStates) {
+    *SwPstateNumber = 0;
+    *PStateEnabled = FALSE;
+  } else {
+    *SwPstateNumber = PState - NumBoostStates;
+    if (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1) {
+      // PState enable = bit 63
+      *PStateEnabled = TRUE;
+    } else {
+      *PStateEnabled = FALSE;
+    }
+  }
+
+  // Bits 39:32 (high 32 bits [7:0])
+  *IddVal = (UINT32) ((PSTATE_MSR *) &LocalMsrRegister)->IddValue;
+  // Bits 41:40 (high 32 bits [9:8])
+  *IddDiv = (UINT32) ((PSTATE_MSR *) &LocalMsrRegister)->IddDiv;
+
+  return (AGESA_SUCCESS);
+}
+
+CONST PSTATE_CPU_FAMILY_SERVICES ROMDATA F10PstateServices =
+{
+  0,
+  (PF_PSTATE_PSD_IS_NEEDED) CommonReturnTrue,
+  F10IsPstatePsdDependent,
+  F10SetTscFreqSel,
+  F10GetPstateTransLatency,
+  F10GetPstateFrequency,
+  F10PstateLevelingCoreMsrModify,
+  F10GetPstatePower,
+  F10GetPstateMaxState,
+  F10GetPstateRegisterInfo
+};
+
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  F10GetPowerStepValueInTime
+ *
+ *  Description:
+ *    Convert power step value in time
+ *
+ *  Parameters:
+ *    @param[out]     *PowerStepPtr
+ *
+ *    @retval       VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+STATIC
+F10GetPowerStepValueInTime (
+  IN OUT   UINT32  *PowerStepPtr
+  )
+{
+  UINT32 TempVar_a;
+
+  TempVar_a = *PowerStepPtr;
+
+  if (TempVar_a < 0x4) {
+    *PowerStepPtr = 400 - (TempVar_a * 100);
+  } else if (TempVar_a <  0x9) {
+    *PowerStepPtr = 130 - (TempVar_a * 10);
+  } else {
+    *PowerStepPtr = 90 - (TempVar_a * 5);
+  }
+}
+
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  F10GetPllValueInTime
+ *
+ *  Description:
+ *    Convert PLL Value in time
+ *
+ *  Parameters:
+ *    @param[out]     *PllLockTimePtr
+ *
+ *    @retval       VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+STATIC
+F10GetPllValueInTime (
+  IN OUT   UINT32  *PllLockTimePtr
+  )
+{
+  if (*PllLockTimePtr < 4) {
+    *PllLockTimePtr = *PllLockTimePtr + 1;
+  } else if (*PllLockTimePtr == 4) {
+    *PllLockTimePtr = 8;
+  } else if (*PllLockTimePtr == 5) {
+    *PllLockTimePtr = 16;
+  } else
+    *PllLockTimePtr = 0;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *    This function will return the CpuFid and CpuDid in MHz, using the formula
+ *    described in the BKDG MSRC001_00[68:64] P-State [4:0] Registers:bit 8:0
+ *
+ *    @param[in]       PstateCpuServices        The current Family Specific Services.
+ *    @param[in]       PStateNumber             P-state number to check.
+ *    @param[in]       Frequency                Leveled target frequency for PStateNumber.
+ *    @param[out]      *CpuFidPtr               New leveled FID.
+ *    @param[out]      *CpuDidPtr1              New leveled DID info 1.
+ *    @param[out]      *CpuDidPtr2              New leveled DID info 2.
+ *    @param[in]       *StdHeader               Header for library and services.
+ *
+ *    @retval       AGESA_WARNING           This P-State does not need to be modified.
+ *    @retval       AGESA_SUCCESS           This P-State must be modified to be level.
+ */
+AGESA_STATUS
+STATIC
+F10GetFrequencyXlatRegInfo (
+  IN       PSTATE_CPU_FAMILY_SERVICES  *PstateCpuServices,
+  IN       UINT8                  PStateNumber,
+  IN       UINT32                 Frequency,
+     OUT   UINT32                 *CpuFidPtr,
+     OUT   UINT32                 *CpuDidPtr1,
+     OUT   UINT32                 *CpuDidPtr2,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32 i;
+  UINT32 j;
+  AGESA_STATUS Status;
+  UINT32 FrequencyInMHz;
+
+  FrequencyInMHz = 0;
+  *CpuDidPtr2 = 0xFFFF;
+
+  Status = AGESA_SUCCESS;
+
+  PstateCpuServices->GetPstateFrequency (PstateCpuServices, PStateNumber, &FrequencyInMHz, StdHeader);
+  if (FrequencyInMHz == Frequency) {
+    Status |= AGESA_WARNING;
+  }
+
+  // CPU Frequency = 100 MHz * (CpuFid + 10h) / (2^CpuDid)
+  // In this for loop i = 2^CpuDid
+
+
+  for (i = 1; i < 17; (i += i)) {
+    for (j = 0; j < 64; j++) {
+      if (Frequency == ((100 * (j + 0x10)) / i )) {
+        *CpuFidPtr = j;
+        if (i == 1) {
+          *CpuDidPtr1 = 0;
+        } else if (i == 2) {
+          *CpuDidPtr1 = 1;
+        } else if (i == 4) {
+          *CpuDidPtr1 = 2;
+        } else if (i == 8) {
+          *CpuDidPtr1 = 3;
+        } else if (i == 16) {
+          *CpuDidPtr1 = 4;
+        } else {
+          *CpuFidPtr = 0xFFFF;
+          *CpuDidPtr1 = 0xFFFF;
+        }
+        // Success
+        return Status;
+      }
+    }
+  }
+
+  // Error Condition
+  *CpuFidPtr = 0x00FF;
+  *CpuDidPtr1 = 0x00FF;
+  *CpuDidPtr2 = 0x00FF;
+
+  return AGESA_ERROR;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10SoftwareThermal.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10SoftwareThermal.c
new file mode 100644
index 0000000000..a983f089c8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10SoftwareThermal.c
@@ -0,0 +1,124 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 thermal initialization
+ *
+ * Performs processor thermal initialization.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuF10SoftwareThermal.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10SOFTWARETHERMAL_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *    Main entry point for initializing the Thermal Control
+ *    safety net feature.
+ *
+ *    This must be run by all Family 10h core 0s in the system.
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParamsPtr       Service parameters.
+ * @param[in]  StdHeader               Config handle for library and services.
+ */
+VOID
+F10PmThermalInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT32    Core;
+  UINT32    Module;
+  UINT32    LocalPciRegister;
+  UINT32    Socket;
+  PCI_ADDR  PciAddress;
+  AGESA_STATUS  IgnoredSts;
+
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+  ASSERT (Core == 0);
+
+  if (GetPciAddress (StdHeader, Socket, 0, &PciAddress, &IgnoredSts)) {
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = NB_CAPS_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if (((NB_CAPS_REGISTER *) &LocalPciRegister)->HtcCapable == 1) {
+      // Enable HTC
+      PciAddress.Address.Register = HTC_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((HTC_REGISTER *) &LocalPciRegister)->HtcSlewSel = 0;
+      ((HTC_REGISTER *) &LocalPciRegister)->HtcEn = 1;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10SoftwareThermal.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10SoftwareThermal.h
new file mode 100644
index 0000000000..9dcc44e94c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10SoftwareThermal.h
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 thermal initialization related functions and structures
+ *
+ * Performs processor thermal initialization.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F10_SOFTWARE_THERMAL_H_
+#define _CPU_F10_SOFTWARE_THERMAL_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F10PmThermalInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F10_SOFTWARE_THERMAL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Utilities.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Utilities.c
new file mode 100644
index 0000000000..ed2ff50186
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Utilities.c
@@ -0,0 +1,1176 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 10h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F10
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuF10PowerMgmt.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuF10Utilities.h"
+#include "cpuPostInit.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10UTILITIES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+// Register encodings for F3xD8[VSRampTime/VSSlamTime]
+CONST UINT32 ROMDATA VSSlamTime[8] =
+{
+  10,   // 000b: 10us
+  20,   // 001b: 20us
+  30,   // 010b: 30us
+  40,   // 011b: 40us
+  60,   // 100b: 60us
+  100,  // 101b: 100us
+  200,  // 110b: 200us
+  500   // 111b: 500us
+};
+
+extern CPU_FAMILY_SUPPORT_TABLE            PstateFamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION    OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Performs the necessary steps for the 'Software Initiated CPU
+ *  Voltage Transitions.'
+ *
+ *  @param[in]   VidCode       VID code to transition to
+ *  @param[in]   StdHeader     Header for library and services
+ *
+ */
+VOID
+F10PmSwVoltageTransition (
+  IN       UINT32 VidCode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32    LocalPciRegister;
+  UINT64    LocalMsrRegister;
+  PCI_ADDR  PciAddress;
+
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = PW_CTL_MISC_REG;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  if (((POWER_CTRL_MISC_REGISTER *) &LocalPciRegister)->SlamVidMode == 1) {
+    LibAmdMsrRead (MSR_COFVID_CTL, &LocalMsrRegister, StdHeader);
+    ((COFVID_CTRL_MSR *) &LocalMsrRegister)->CpuVid = VidCode;
+    LibAmdMsrWrite (MSR_COFVID_CTL, &LocalMsrRegister, StdHeader);
+    F10WaitOutVoltageTransition  (TRUE, StdHeader);
+  } else
+    return;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Performs the necessary steps for the 'Software Initiated NB
+ *  Voltage Transitions.'
+ *
+ *  This can only be run by a local core 0.
+ *
+ *  @param[in]   VidCode       VID code to transition to
+ *  @param[in]   SlamMode      Whether voltage is to be slammed, or stepped
+ *  @param[in]   StdHeader     Header for library and services
+ *
+ */
+VOID
+F10PmSwVoltageTransitionServerNb (
+  IN       UINT32 VidCode,
+  IN       BOOLEAN SlamMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 Core;
+  UINT32 NbVidStatus;
+  UINT32 Socket;
+  UINT32 IgnoredModule;
+  UINT32 IgnoredCore;
+  UINT32 CoreNum;
+  AP_TASK TaskPtr;
+  AGESA_STATUS IgnoredSts;
+  SW_VOLT_TRANS_NB RemoteInput;
+
+  RemoteInput.VidCode = VidCode;
+  RemoteInput.SlamMode = SlamMode;
+  TaskPtr.FuncAddress.PfApTaskIO = F10SwVoltageTransitionServerNbCore;
+  TaskPtr.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (SW_VOLT_TRANS_NB);
+  TaskPtr.DataTransfer.DataPtr = &RemoteInput;
+  TaskPtr.DataTransfer.DataTransferFlags = 0;
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+
+  IdentifyCore (StdHeader, &Socket, &IgnoredModule, &IgnoredCore, &IgnoredSts);
+  GetActiveCoresInCurrentSocket (&CoreNum, StdHeader);
+
+  do {
+    NbVidStatus = TaskPtr.FuncAddress.PfApTaskIO (&RemoteInput, StdHeader);
+    for (Core = 1; Core < (UINT8) CoreNum; Core++) {
+      NbVidStatus |= ApUtilRunCodeOnSocketCore ((UINT8)Socket, (UINT8)Core, &TaskPtr, StdHeader);
+    }
+    F10WaitOutVoltageTransition (SlamMode, StdHeader);
+  } while (NbVidStatus != 0);
+  return;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns current VsSlamTime in microseconds.
+ *
+ *  @param[out]  VsTimeUsecs   Provides the wait time needed for a Slam Voltage transition.
+ *  @param[in]   SlamMode      Whether voltage is to be slammed, or stepped
+ *  @param[in]   StdHeader     Header for library and services
+ *
+ */
+VOID
+F10GetCurrentVsTimeInUsecs (
+     OUT   UINT32  *VsTimeUsecs,
+  IN       BOOLEAN SlamMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8     RegisterEncoding;
+  UINT32    LocalPciRegister;
+  CONST UINT16    SlamTimes[8] = {10, 20, 30, 40, 60, 100, 200, 500};
+  PCI_ADDR  PciAddress;
+
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = CPTC1_REG;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+  if (SlamMode) {
+    RegisterEncoding = (UINT8) ((CLK_PWR_TIMING_CTRL1_REGISTER *) &LocalPciRegister)->VSSlamTime;
+  } else {
+    RegisterEncoding = (UINT8) ((CLK_PWR_TIMING_CTRL1_REGISTER *) &LocalPciRegister)->VSRampTime;
+  }
+
+  *VsTimeUsecs = (UINT32) SlamTimes[RegisterEncoding];
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Spins until VsSlamTime microseconds have expired.
+ *
+ *  @param[in]   SlamMode      Whether voltage is to be slammed, or stepped
+ *  @param[in]   StdHeader     Header for library and services
+ *
+ */
+VOID
+F10WaitOutVoltageTransition (
+  IN       BOOLEAN SlamMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 VsTimeUsecs;
+
+  F10GetCurrentVsTimeInUsecs (&VsTimeUsecs, SlamMode, StdHeader);
+  WaitMicroseconds (VsTimeUsecs, StdHeader);
+  return;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Code required to be run on every local core in order to perform
+ *  the steps necessary for 'Software Initiated NB Voltage
+ *  Transitions.'
+ *
+ *  @param[out]  InputData     Family specific data needed to perform a Voltage transition.
+ *  @param[in]   StdHeader     Header for library and services.
+ *
+ *  @retval     zero           All Voltage Transitions are completed.
+ *  @retval     one            There are Voltage transitions remaining to reach target.
+ *
+ */
+UINT32
+F10SwVoltageTransitionServerNbCore (
+  IN       VOID  *InputData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 VidCode;
+  UINT64 LocalMsrRegister;
+
+  if (((SW_VOLT_TRANS_NB *) InputData)->SlamMode) {
+    VidCode = ((SW_VOLT_TRANS_NB *) InputData)->VidCode;
+  } else {
+    LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+    VidCode = (UINT32) (((COFVID_STS_MSR *) &LocalMsrRegister)->CurNbVid);
+    if (VidCode > ((SW_VOLT_TRANS_NB *) InputData)->VidCode) {
+      --VidCode;
+    } else if (VidCode < ((SW_VOLT_TRANS_NB *) InputData)->VidCode) {
+      ++VidCode;
+    }
+  }
+  LibAmdMsrRead (MSR_COFVID_CTL, &LocalMsrRegister, StdHeader);
+  ((COFVID_CTRL_MSR *) &LocalMsrRegister)->NbVid = VidCode;
+  LibAmdMsrWrite (MSR_COFVID_CTL, &LocalMsrRegister, StdHeader);
+
+  if (VidCode == ((SW_VOLT_TRANS_NB *) InputData)->VidCode) {
+    return 0;
+  } else {
+    return 1;
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Calculate and reprogram F3xD8[VSSlamTime] based on the algorithm in the BKDG.
+ *
+ * This function determines the largest voltage step that the core will have
+ * to make, calculates how much time it will take for the voltage to stabilize,
+ * and programs the necessary encoded value for the amount of time discovered.
+ *
+ * @param[in]  PciAddress         Segment/bus/device of a module on the socket
+ *                                to program.
+ * @param[in]  CpuEarlyParams     Service parameters
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+F10ProgramVSSlamTimeOnSocket (
+  IN       PCI_ADDR             *PciAddress,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  )
+{
+  UINT8    NbVid;
+  UINT8    P0VidCode;
+  UINT8    PminVidCode;
+  UINT32   AndMask;
+  UINT32   MsrAddr;
+  UINT32   OrMask;
+  UINT32   LocalPciRegister;
+  UINT64   LocalMsrRegister;
+  BOOLEAN  IsPviMode;
+  PCI_ADDR LocalPciAddress;
+
+  // Get F3xA0[PviMode]
+  LocalPciAddress.AddressValue = PciAddress->AddressValue;
+  LocalPciAddress.Address.Function = FUNC_3;
+  LocalPciAddress.Address.Register = PW_CTL_MISC_REG;
+  LibAmdPciRead (AccessWidth32, LocalPciAddress, &LocalPciRegister, StdHeader);
+  if (((POWER_CTRL_MISC_REGISTER *) &LocalPciRegister)->PviMode == 1) {
+    IsPviMode = TRUE;
+  } else {
+    IsPviMode = FALSE;
+  }
+
+  // Get P0's voltage
+  LibAmdMsrRead (PS_REG_BASE, &LocalMsrRegister, StdHeader);
+  P0VidCode = (UINT8) (((PSTATE_MSR *) &LocalMsrRegister)->CpuVid);
+
+  // If SVI, we only care about CPU VID.
+  // If PVI, determine the higher voltage between NB and CPU
+  if (IsPviMode) {
+    NbVid = (UINT8) (((PSTATE_MSR *) &LocalMsrRegister)->NbVid);
+    if (P0VidCode > NbVid) {
+      P0VidCode = NbVid;
+    }
+  }
+
+  // Get Pmin's index
+  LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &LocalMsrRegister, StdHeader);
+  MsrAddr = (UINT32) ((((PSTATE_CURLIM_MSR *) &LocalMsrRegister)->PstateMaxVal) + PS_REG_BASE);
+
+  // Get Pmin's VID
+  LibAmdMsrRead (MsrAddr, &LocalMsrRegister, StdHeader);
+  PminVidCode = (UINT8) (((PSTATE_MSR *) &LocalMsrRegister)->CpuVid);
+
+  // If SVI, we only care about CPU VID.
+  // If PVI, determine the higher voltage b/t NB and CPU
+  if (IsPviMode) {
+    NbVid = (UINT8) (((PSTATE_MSR *) &LocalMsrRegister)->NbVid);
+    if (PminVidCode > NbVid) {
+      PminVidCode = NbVid;
+    }
+  }
+
+  // Program F3xD8[VSSlamTime]
+  LocalPciAddress.Address.Register = CPTC1_REG;
+  AndMask = 0xFFFFFFFF;
+  ((CLK_PWR_TIMING_CTRL1_REGISTER *) &AndMask)->VSSlamTime = 0;
+  OrMask = 0x00000000;
+  ((CLK_PWR_TIMING_CTRL1_REGISTER *) &OrMask)->VSSlamTime =
+    F10GetSlamTimeEncoding (P0VidCode, PminVidCode, CpuEarlyParams, VSSlamTime, StdHeader);
+  OptionMultiSocketConfiguration.ModifyCurrSocketPci (&LocalPciAddress, AndMask, OrMask, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the encoded voltage stabilization slam time for the executing
+ * family 10h core.
+ *
+ * This function looks up the appropriate encoded value for the desired
+ * VID codes.
+ *
+ * @param[in]  HighVoltageVid     VID code of the higher voltage.
+ * @param[in]  LowVoltageVid      VID code of the lower voltage.
+ * @param[in]  CpuEarlyParams     Service parameters
+ * @param[in]  SlamTimeTable      Look-up table of slam times.
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ * @retval     Encoded register value.
+ *
+ */
+UINT32
+F10GetSlamTimeEncoding (
+  IN       UINT8  HighVoltageVid,
+  IN       UINT8  LowVoltageVid,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+  IN       CONST UINT32 *SlamTimeTable,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 SlamTime;
+  UINT32 EncodedSlamTime;
+  UINT32 VoltageDifference;
+
+  ASSERT (LowVoltageVid >= HighVoltageVid);
+  ASSERT (CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].SlewRate != 0);
+
+  // Calculate Slam Time
+  //   VSSlamTime = 0.4us/mV (or 0.2us/mV) * Vhigh - Vlow
+  //   In our case, we will scale the values by 100 to avoid
+  //   decimals.
+
+  VoltageDifference = (UINT32) ((LowVoltageVid - HighVoltageVid) * 12500);
+  SlamTime = (VoltageDifference / CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].SlewRate) + CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].AdditionalDelay;
+  if (VoltageDifference % CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].SlewRate) {
+    SlamTime++;
+  }
+
+  // Now round up to nearest register setting
+  for (EncodedSlamTime = 0; EncodedSlamTime < 8; EncodedSlamTime++) {
+    if (SlamTime <= SlamTimeTable[EncodedSlamTime]) {
+      break;
+    }
+  }
+
+  if (EncodedSlamTime > 7) {
+    // The VRMs are too slow for this CPU.  Set to max, and fire an error trap.
+    IDS_ERROR_TRAP;
+    EncodedSlamTime = 7;
+  }
+
+  return (EncodedSlamTime);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Disables the desired P-state.
+ *
+ *  @CpuServiceMethod{::F_CPU_DISABLE_PSTATE}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]   StateNumber              The P-State to disable.
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F10DisablePstate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8 StateNumber,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 LocalMsrRegister;
+
+  ASSERT (StateNumber < NM_PS_REG);
+  LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+  ((PSTATE_MSR *) &LocalMsrRegister)->PsEnable = 0;
+  LibAmdMsrWrite (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Transitions the executing core to the desired P-state.
+ *
+ *  @CpuServiceMethod{::F_CPU_TRANSITION_PSTATE}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]   StateNumber              The new P-State to make effective.
+ *  @param[in]   WaitForTransition        True if the caller wants the transition completed upon return.
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      AGESA_SUCCESS       Always Succeeds
+ */
+AGESA_STATUS
+F10TransitionPstate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8              StateNumber,
+  IN       BOOLEAN            WaitForTransition,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 LocalMsrRegister;
+
+  LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &LocalMsrRegister, StdHeader);
+  ASSERT (((PSTATE_CURLIM_MSR *) &LocalMsrRegister)->PstateMaxVal >= StateNumber);
+  LibAmdMsrRead (MSR_PSTATE_CTL, &LocalMsrRegister, StdHeader);
+  ((PSTATE_CTRL_MSR *) &LocalMsrRegister)->PstateCmd = (UINT64) StateNumber;
+  LibAmdMsrWrite (MSR_PSTATE_CTL, &LocalMsrRegister, StdHeader);
+  if (WaitForTransition) {
+    do {
+      LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+    } while (((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate != (UINT64) StateNumber);
+  }
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Determines the rate at which the executing core's time stamp counter is
+ *  incrementing.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_TSC_RATE}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  FrequencyInMHz           TSC actual frequency.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ *  @return      The most severe status of all called services
+ */
+AGESA_STATUS
+F10GetTscRate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 LocalMsrRegister;
+  PSTATE_CPU_FAMILY_SERVICES  *FamilyServices;
+
+  FamilyServices = NULL;
+  GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  ASSERT (FamilyServices != NULL);
+
+  LibAmdMsrRead (MSR_HWCR, &LocalMsrRegister, StdHeader);
+  if ((LocalMsrRegister & 0x01000000) != 0) {
+    return (FamilyServices->GetPstateFrequency (FamilyServices, F10GetNumberOfBoostedPstatesOnCore (StdHeader), FrequencyInMHz, StdHeader));
+  } else {
+    return (FamilySpecificServices->GetCurrentNbFrequency (FamilySpecificServices, FrequencyInMHz, StdHeader));
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Determines the NB clock on the desired node.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_NB_FREQ}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  FrequencyInMHz           Northbridge clock frequency in MHz.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ *  @return      AGESA_SUCCESS            FrequencyInMHz is valid.
+ */
+AGESA_STATUS
+F10GetCurrentNbFrequency (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32  NbFid;
+  UINT32  LocalPciRegister;
+  UINT64  LocalMsrRegister;
+  PCI_ADDR PciAddress;
+  AGESA_STATUS ReturnCode;
+
+  ReturnCode = AGESA_ERROR;
+
+  if (OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader)) {
+    ReturnCode = AGESA_SUCCESS;
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = CPTC0_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    NbFid = ((CLK_PWR_TIMING_CTRL_REGISTER *) &LocalPciRegister)->NbFid;
+    LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+    if (((COFVID_STS_MSR *) &LocalMsrRegister)->CurNbDid == 0) {
+      *FrequencyInMHz = ((NbFid + 4) * 200);
+    } else {
+      *FrequencyInMHz = (((NbFid + 4) * 200) / 2);
+    }
+  }
+  return ReturnCode;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initially launches the desired core to run from the reset vector.
+ *
+ * @CpuServiceMethod{::F_CPU_AP_INITIAL_LAUNCH}.
+ *
+ * @param[in]   FamilySpecificServices   The current Family Specific Services.
+ * @param[in]   SocketNum                The Processor on which the core is to be launched
+ * @param[in]   ModuleNum                The Module in that processor containing that core
+ * @param[in]   CoreNum                  The Core to launch
+ * @param[in]   PrimaryCoreNum           The id of the module's primary core.
+ * @param[in]   StdHeader                Header for library and services
+ *
+ * @retval      TRUE          The core was launched
+ * @retval      FALSE         The core was previously launched
+ */
+BOOLEAN
+F10LaunchApCore (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT32 SocketNum,
+  IN       UINT32 ModuleNum,
+  IN       UINT32 CoreNum,
+  IN       UINT32 PrimaryCoreNum,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32    NodeRelativeCoreNum;
+  UINT32    LocalPciRegister;
+  PCI_ADDR  PciAddress;
+  BOOLEAN   LaunchFlag;
+  AGESA_STATUS Ignored;
+
+  // Code Start
+  LaunchFlag = FALSE;
+  NodeRelativeCoreNum = CoreNum - PrimaryCoreNum;
+  GetPciAddress (StdHeader, SocketNum, ModuleNum, &PciAddress, &Ignored);
+  PciAddress.Address.Function = FUNC_0;
+
+  switch (NodeRelativeCoreNum) {
+  case 0:
+    PciAddress.Address.Register = HT_INIT_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & HT_INIT_CTRL_REQ_DIS) != 0) {
+      LocalPciRegister &= ~HT_INIT_CTRL_REQ_DIS;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 1:
+    PciAddress.Address.Register = HT_TRANS_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & HT_TRANS_CTRL_CPU1_EN) == 0) {
+      LocalPciRegister |= HT_TRANS_CTRL_CPU1_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 2:
+    PciAddress.Address.Register = ECS_HT_TRANS_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+    if ((LocalPciRegister & ECS_HT_TRANS_CTRL_CPU2_EN) == 0) {
+      LocalPciRegister |= ECS_HT_TRANS_CTRL_CPU2_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister,
+                      StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 3:
+    PciAddress.Address.Register = ECS_HT_TRANS_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & ECS_HT_TRANS_CTRL_CPU3_EN) == 0) {
+      LocalPciRegister |= ECS_HT_TRANS_CTRL_CPU3_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 4:
+    PciAddress.Address.Register = ECS_HT_TRANS_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & ECS_HT_TRANS_CTRL_CPU4_EN) == 0) {
+      LocalPciRegister |= ECS_HT_TRANS_CTRL_CPU4_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 5:
+    PciAddress.Address.Register = ECS_HT_TRANS_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & ECS_HT_TRANS_CTRL_CPU5_EN) == 0) {
+      LocalPciRegister |= ECS_HT_TRANS_CTRL_CPU5_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+
+  default:
+    break;
+  }
+
+  return (LaunchFlag);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Get CPU Specific Platform Type Info.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO}.
+ *
+ *    This function returns Returns the platform features.
+ *
+ *  @param[in]     FamilySpecificServices         The current Family Specific Services.
+ *  @param[in,out] Features                       The Features supported by this platform.
+ *  @param[in]     StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ *  @retval      AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F10GetPlatformTypeSpecificInfo (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   PLATFORM_FEATS         *Features,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provide the features of the next HT link.
+ *
+ *  @CpuServiceMethod{::F_GET_NEXT_HT_LINK_FEATURES}.
+ *
+ * This method is different than the HT Phy Features method, because for the phy registers
+ * sublink 1 matches and should be programmed if the link is ganged but for PCI config
+ * registers sublink 1 is reserved if the link is ganged.
+ *
+ * @param[in]     FamilySpecificServices    The current Family Specific Services.
+ * @param[in,out] Link                      Initially zero, each call returns the link number;
+ *                                          caller passes it back unmodified each call.
+ * @param[in,out] LinkBase                  Initially the PCI bus, device, function=0, offset=0;
+ *                                          Each call returns the HT Host Capability function and offset;
+ *                                          Caller may use it to access registers, but must @b not modify it;
+ *                                          Each new call passes the previous value as input.
+ * @param[out]    HtHostFeats               The link's features.
+ * @param[in]     StdHeader                 Standard Head Pointer
+ *
+ * @retval        TRUE                      Valid link and features found.
+ * @retval        FALSE                     No more links.
+ */
+BOOLEAN
+F10GetNextHtLinkFeatures (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   UINTN                  *Link,
+  IN OUT   PCI_ADDR               *LinkBase,
+     OUT   HT_HOST_FEATS          *HtHostFeats,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  PCI_ADDR  PciAddress;
+  UINT32    RegValue;
+  UINT32    ExtendedFreq;
+  UINTN     LinkOffset;
+  BOOLEAN   Result;
+
+  ASSERT (FamilySpecificServices != NULL);
+
+  // No features present unless link is good and connected.
+  HtHostFeats->HtHostValue = 0;
+
+  Result = TRUE;
+
+  // Find next link.
+  if (LinkBase->Address.Register == 0) {
+    // Beginning iteration now.
+    LinkBase->Address.Register = HT_CAPABILITIES_POINTER;
+    LibAmdPciReadBits (*LinkBase, 7, 0, &RegValue, StdHeader);
+  } else {
+    // Get next link offset.
+    LibAmdPciReadBits (*LinkBase, 15, 8, &RegValue, StdHeader);
+  }
+  if (RegValue == 0) {
+    // Are we at the end?  Check if we can move to another function.
+    if (LinkBase->Address.Function == 0) {
+      LinkBase->Address.Function = 4;
+      LinkBase->Address.Register = HT_CAPABILITIES_POINTER;
+      LibAmdPciReadBits (*LinkBase, 7, 0, &RegValue, StdHeader);
+    }
+  }
+
+  if (RegValue != 0) {
+    // Not at end, process the found link.
+    LinkBase->Address.Register = RegValue;
+    // Compute link number
+    *Link = (((LinkBase->Address.Function == 4) ? 4 : 0) + ((LinkBase->Address.Register - 0x80) >> 5));
+
+    // Handle pending link power off, check End of Chain, Xmit Off.
+    PciAddress = *LinkBase;
+    PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_CONTROL_REG_OFFSET;
+    LibAmdPciReadBits (PciAddress, 7, 6, &RegValue, StdHeader);
+    if (RegValue == 0) {
+      // Check coherency (HTHOST_LINK_TYPE_REG = 0x18)
+      PciAddress = *LinkBase;
+      PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_TYPE_REG_OFFSET;
+      LibAmdPciReadBits (PciAddress, 4, 0, &RegValue, StdHeader);
+      if (RegValue  == 3) {
+        HtHostFeats->HtHostFeatures.Coherent = 1;
+      } else if (RegValue == 7) {
+        HtHostFeats->HtHostFeatures.NonCoherent = 1;
+      }
+    }
+
+    // If link was not connected, don't check other attributes, make sure
+    // to return zero, no match.
+    if ((HtHostFeats->HtHostFeatures.Coherent == 1) || (HtHostFeats->HtHostFeatures.NonCoherent == 1)) {
+      // Check gen3
+      PciAddress = *LinkBase;
+      PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_EXTENDED_FREQ;
+      LibAmdPciRead (AccessWidth32, PciAddress, &ExtendedFreq, StdHeader);
+      PciAddress = *LinkBase;
+      PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_FREQ_OFFSET;
+      LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+      RegValue = (((ExtendedFreq & 0x1) << 4) | ((RegValue & 0x00000F00) >> 8));
+      if (RegValue > 6) {
+        HtHostFeats->HtHostFeatures.Ht3 = 1;
+      } else {
+        HtHostFeats->HtHostFeatures.Ht1 = 1;
+      }
+      // Check ganged. Must check the bit for sublink 0.
+      LinkOffset = (*Link > 3) ? ((*Link - 4) * 4) : (*Link * 4);
+      PciAddress = *LinkBase;
+      PciAddress.Address.Function = 0;
+      PciAddress.Address.Register = ((UINT32)LinkOffset + 0x170);
+      LibAmdPciReadBits (PciAddress, 0, 0, &RegValue, StdHeader);
+      if (RegValue == 0) {
+        HtHostFeats->HtHostFeatures.UnGanged = 1;
+      } else {
+        if (*Link < 4) {
+          HtHostFeats->HtHostFeatures.Ganged = 1;
+        } else {
+          // If this is a sublink 1 but it will be ganged, clear all features.
+          HtHostFeats->HtHostValue = 0;
+        }
+      }
+    }
+  } else {
+    // End of links.
+    Result = FALSE;
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Checks to see if the HT phy register table entry should be applied
+ *
+ * @CpuServiceMethod{::F_NEXT_LINK_HAS_HTFPY_FEATS}.
+ *
+ * Find the next link which matches, if any.
+ * This method will match for sublink 1 if the link is ganged and sublink 0 matches.
+ *
+ * @param[in]     FamilySpecificServices    The current Family Specific Services.
+ * @param[in,out] HtHostCapability Initially the PCI bus, device, function=0, offset=0;
+ *                                         Each call returns the HT Host Capability function and offset;
+ *                                         Caller may use it to access registers, but must @b not modify it;
+ *                                         Each new call passes the previous value as input.
+ * @param[in,out] Link             Initially zero, each call returns the link number; caller passes it back unmodified each call.
+ * @param[in]     HtPhyLinkType    Link type field from a register table entry to compare against
+ * @param[out]    MatchedSublink1  TRUE: It is actually just sublink 1 that matches, FALSE: any other condition.
+ * @param[out]    Frequency0       The frequency of sublink0 (200 MHz if not connected).
+ * @param[out]    Frequency1       The frequency of sublink1 (200 MHz if not connected).
+ * @param[in]     StdHeader        Standard Head Pointer
+ *
+ * @retval        TRUE             Link matches
+ * @retval        FALSE            No more links
+ *
+ */
+BOOLEAN
+F10NextLinkHasHtPhyFeats (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   PCI_ADDR           *HtHostCapability,
+  IN OUT   UINT32             *Link,
+  IN       HT_PHY_LINK_FEATS  *HtPhyLinkType,
+     OUT   BOOLEAN            *MatchedSublink1,
+     OUT   HT_FREQUENCIES     *Frequency0,
+     OUT   HT_FREQUENCIES     *Frequency1,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32    RegValue;
+  UINT32    ExtendedFreq;
+  UINT32    InternalLinks;
+  UINT32    Width;
+  PCI_ADDR  PciAddress;
+  PCI_ADDR  SubLink1Address;
+  HT_PHY_LINK_FEATS LinkType;
+  BOOLEAN   IsReallyCheckingBoth;
+  BOOLEAN   IsFound;
+  BOOLEAN   Result;
+
+  ASSERT (*Link < 4);
+  ASSERT (HtPhyLinkType != NULL);
+  // error checks: No unknown link type bits set and not a "match none"
+  ASSERT ((HtPhyLinkType->HtPhyLinkValue & ~(HTPHY_LINKTYPE_ALL | HTPHY_LINKTYPE_SL0_AND | HTPHY_LINKTYPE_SL1_AND)) == 0);
+  ASSERT (HtPhyLinkType->HtPhyLinkValue != 0);
+
+  Result = FALSE;
+  IsFound = FALSE;
+  while (!IsFound) {
+    *Frequency0 = 0;
+    *Frequency1 = 0;
+    IsReallyCheckingBoth = FALSE;
+    *MatchedSublink1 = FALSE;
+    LinkType.HtPhyLinkValue = 0;
+
+    // Find next link.
+    PciAddress = *HtHostCapability;
+    if (PciAddress.Address.Register == 0) {
+      // Beginning iteration now.
+      PciAddress.Address.Register = HT_CAPABILITIES_POINTER;
+      LibAmdPciReadBits (PciAddress, 7, 0, &RegValue, StdHeader);
+    } else {
+      // Get next link offset.
+      LibAmdPciReadBits (PciAddress, 15, 8, &RegValue, StdHeader);
+    }
+    if (RegValue != 0) {
+      HtHostCapability->Address.Register = RegValue;
+      // Compute link number of this sublink pair (so we don't need to account for function).
+      *Link = ((HtHostCapability->Address.Register - 0x80) >> 5);
+
+      // Set the link indicators.  This assumes each sublink set is contiguous, that is, links 3, 2, 1, 0 and 7, 6, 5, 4.
+      LinkType.HtPhyLinkValue |= (HTPHY_LINKTYPE_SL0_LINK0 << *Link);
+      LinkType.HtPhyLinkValue |= (HTPHY_LINKTYPE_SL1_LINK4 << *Link);
+
+      // Read IntLnkRoute from the Link Initialization Status register.
+      // (Note that this register field is not reserved prior to rev D, but should be zero.)
+      PciAddress = *HtHostCapability;
+      PciAddress.Address.Function = 0;
+      PciAddress.Address.Register = 0x1A0;
+      LibAmdPciReadBits (PciAddress, 23, 16, &InternalLinks, StdHeader);
+
+      // if ganged, don't read sublink 1, but use sublink 0 to check.
+      SubLink1Address = *HtHostCapability;
+
+      // Check ganged. Since we got called for sublink 0, sublink 1 is implemented also,
+      // but only access it if it is also unganged.
+      PciAddress = *HtHostCapability;
+      PciAddress.Address.Function = 0;
+      PciAddress.Address.Register = ((*Link * 4) + 0x170);
+      LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+      RegValue = (RegValue & 0x01);
+      if (RegValue == 0) {
+        // Then really read sublink1, rather than using sublink0
+        SubLink1Address.Address.Function = 4;
+        IsReallyCheckingBoth = TRUE;
+      }
+
+      // Checks for Sublink 0
+
+      // Handle pending link power off, check End of Chain, Xmit Off.
+      PciAddress = *HtHostCapability;
+      PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_CONTROL_REG_OFFSET;
+      LibAmdPciReadBits (PciAddress, 7, 6, &RegValue, StdHeader);
+      if (RegValue == 0) {
+        // Check coherency (HTHOST_LINK_TYPE_REG = 0x18)
+        PciAddress = *HtHostCapability;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_TYPE_REG_OFFSET;
+        LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+        if ((RegValue & 0x1F) == 3) {
+          LinkType.HtPhyLinkFeatures.HtPhySL0Coh = 1;
+        } else if ((RegValue & 0x1F) == 7) {
+          LinkType.HtPhyLinkFeatures.HtPhySL0NonCoh = 1;
+        }
+      }
+
+      // If link was not connected, don't check other attributes, make sure
+      // to return zero, no match. (Phy may be powered off.)
+      if ((LinkType.HtPhyLinkFeatures.HtPhySL0Coh) || (LinkType.HtPhyLinkFeatures.HtPhySL0NonCoh)) {
+        // Check gen3
+        PciAddress = *HtHostCapability;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_EXTENDED_FREQ;
+        LibAmdPciRead (AccessWidth32, PciAddress, &ExtendedFreq, StdHeader);
+        PciAddress = *HtHostCapability;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_FREQ_OFFSET;
+        LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+        RegValue = (((ExtendedFreq & 0x1) << 4) | ((RegValue & 0x00000F00) >> 8));
+        *Frequency0 = RegValue;
+        if (RegValue > 6) {
+          LinkType.HtPhyLinkFeatures.HtPhySL0Ht3 = 1;
+        } else {
+          LinkType.HtPhyLinkFeatures.HtPhySL0Ht1 = 1;
+        }
+        // Check internal / external
+        if ((InternalLinks & (1 << *Link)) == 0) {
+          // External
+          LinkType.HtPhyLinkFeatures.HtPhySL0External = 1;
+        } else {
+          // Internal
+          LinkType.HtPhyLinkFeatures.HtPhySL0Internal = 1;
+        }
+      } else {
+        LinkType.HtPhyLinkValue &= ~(HTPHY_LINKTYPE_SL0_ALL);
+      }
+
+      // Checks for Sublink 1
+      // Handle pending link power off, check End of Chain, Xmit Off.
+      PciAddress = SubLink1Address;
+      PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_CONTROL_REG_OFFSET;
+      LibAmdPciReadBits (PciAddress, 7, 6, &RegValue, StdHeader);
+      LibAmdPciReadBits (PciAddress, 31, 24, &Width, StdHeader);
+      if ((RegValue == 0) && (IsReallyCheckingBoth || (Width == 0x11))) {
+        // Check coherency (HTHOST_LINK_TYPE_REG = 0x18)
+        PciAddress = SubLink1Address;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_TYPE_REG_OFFSET;
+        LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+        if ((RegValue & 0x1F) == 3) {
+          LinkType.HtPhyLinkFeatures.HtPhySL1Coh = 1;
+        } else if ((RegValue & 0x1F) == 7) {
+          LinkType.HtPhyLinkFeatures.HtPhySL1NonCoh = 1;
+        }
+      }
+
+      if ((LinkType.HtPhyLinkFeatures.HtPhySL1Coh) || (LinkType.HtPhyLinkFeatures.HtPhySL1NonCoh)) {
+        // Check gen3
+        PciAddress = SubLink1Address;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_EXTENDED_FREQ;
+        LibAmdPciRead (AccessWidth32, PciAddress, &ExtendedFreq, StdHeader);
+        PciAddress = SubLink1Address;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_FREQ_OFFSET;
+        LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+        RegValue = (((ExtendedFreq & 0x1) << 4) | ((RegValue & 0x00000F00) >> 8));
+        *Frequency1 = RegValue;
+        if (RegValue > 6) {
+          LinkType.HtPhyLinkFeatures.HtPhySL1Ht3 = 1;
+        } else {
+          LinkType.HtPhyLinkFeatures.HtPhySL1Ht1 = 1;
+        }
+        // Check internal / external.  Note that we do really check sublink 1 regardless of ganging.
+        if ((InternalLinks & (1 << (*Link + 4))) == 0) {
+          // External
+          LinkType.HtPhyLinkFeatures.HtPhySL1External = 1;
+        } else {
+          // Internal
+          LinkType.HtPhyLinkFeatures.HtPhySL1Internal = 1;
+        }
+      } else {
+        LinkType.HtPhyLinkValue &= ~(HTPHY_LINKTYPE_SL1_ALL);
+      }
+
+      // Determine if the link matches the entry criteria.
+      // For Deemphasis checking, indicate whether it was actually sublink 1 that matched.
+      // If the link is ganged or only sublink 0 matched, or the link features didn't match, this is false.
+      if (((HtPhyLinkType->HtPhyLinkValue & HTPHY_LINKTYPE_SL0_AND) == 0) &&
+          ((HtPhyLinkType->HtPhyLinkValue & HTPHY_LINKTYPE_SL1_AND) == 0)) {
+        // Match if any feature matches (OR)
+        Result = (BOOLEAN) ((LinkType.HtPhyLinkValue & HtPhyLinkType->HtPhyLinkValue) != 0);
+      } else {
+        // Match if all features match (AND)
+        Result = (BOOLEAN) ((HtPhyLinkType->HtPhyLinkValue & ~(HTPHY_LINKTYPE_SL0_AND | HTPHY_LINKTYPE_SL1_AND)) ==
+                           (LinkType.HtPhyLinkValue & HtPhyLinkType->HtPhyLinkValue));
+      }
+      if (Result) {
+        if (IsReallyCheckingBoth &&
+            (((LinkType.HtPhyLinkValue & HtPhyLinkType->HtPhyLinkValue) & (HTPHY_LINKTYPE_SL1_ALL)) != 0)) {
+          *MatchedSublink1 = TRUE;
+        }
+        IsFound = TRUE;
+      } else {
+        // Go to next link
+      }
+    } else {
+      // No more links
+      IsFound = TRUE;
+    }
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Applies an HT Phy read-modify-write based on an HT Phy register table entry.
+ *
+ * @CpuServiceMethod{::F_SET_HT_PHY_REGISTER}.
+ *
+ * This function performs the necessary sequence of PCI reads, writes, and waits
+ * necessary to program an HT Phy register.
+ *
+ * @param[in]  FamilySpecificServices    The current Family Specific Services.
+ * @param[in]  HtPhyEntry    HT Phy register table entry to apply
+ * @param[in]  CapabilitySet The link's HT Host base address.
+ * @param[in]  Link          Zero based, node, link number (not package link).
+ * @param[in]  StdHeader     Config handle for library and services
+ *
+ */
+VOID
+F10SetHtPhyRegister (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       HT_PHY_TYPE_ENTRY_DATA  *HtPhyEntry,
+  IN       PCI_ADDR                 CapabilitySet,
+  IN       UINT32                   Link,
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  )
+{
+  UINT32    Temp;
+  UINT32    PhyReg;
+  PCI_ADDR  PhyBase;
+
+  // Determine the PCI config address of the HT Phy portal
+  PhyBase = CapabilitySet;
+  PhyBase.Address.Function = FUNC_4;
+  PhyBase.Address.Register = ((Link << 3) + REG_HT4_PHY_OFFSET_BASE_4X180);
+
+  LibAmdPciRead (AccessWidth32, PhyBase, &PhyReg, StdHeader);
+
+  // Handle direct map registers if needed
+  PhyReg &= ~(HTPHY_DIRECT_OFFSET_MASK);
+  if (HtPhyEntry->Address > 0x1FF) {
+    PhyReg |= HTPHY_DIRECT_MAP;
+  }
+
+  PhyReg |= (HtPhyEntry->Address);
+  // Ask the portal to read the HT Phy Register contents
+  LibAmdPciWrite (AccessWidth32, PhyBase, &PhyReg, StdHeader);
+  do
+  {
+    LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader);
+  } while (!(Temp & HTPHY_IS_COMPLETE_MASK));
+
+  // Get the current register contents and do the update requested by the table
+  PhyBase.AddressValue += 4;
+  LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader);
+  Temp &= ~(HtPhyEntry->Mask);
+  Temp |= (HtPhyEntry->Data);
+  LibAmdPciWrite (AccessWidth32, PhyBase, &Temp, StdHeader);
+
+  PhyBase.AddressValue -= 4;
+  // Ask the portal to write our updated value to the HT Phy
+  PhyReg |= HTPHY_WRITE_CMD;
+  LibAmdPciWrite (AccessWidth32, PhyBase, &PhyReg, StdHeader);
+  do
+  {
+    LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader);
+  } while (!(Temp & HTPHY_IS_COMPLETE_MASK));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the number of core performance boost states.
+ *
+ * This function will return the number of boosted states present on
+ * the executing core.  This is useful when trying to determine the
+ * "software P0" state.
+ *
+ * @param[in]  StdHeader     Config handle for library and services
+ *
+ * @return      The number of boosted core P-states.
+ *
+ */
+UINT8
+F10GetNumberOfBoostedPstatesOnCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8        NumBoostStates;
+  PCI_ADDR     PciAddress;
+  UINT32       LocalPciRegister;
+  CPUID_DATA   CpuidData;
+
+  LibAmdCpuidRead (AMD_CPUID_APM, &CpuidData, StdHeader);
+  if (((CpuidData.EDX_Reg & 0x00000200) >> 9) == 1) {
+    OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+    PciAddress.Address.Function = FUNC_4;
+    PciAddress.Address.Register = CPB_CTRL_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    NumBoostStates = (UINT8) (((CPB_CTRL_REGISTER *) &LocalPciRegister)->NumBoostStates);
+  } else {
+    NumBoostStates = 0;
+  }
+
+  return NumBoostStates;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Utilities.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Utilities.h
new file mode 100644
index 0000000000..73d9aa6b59
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10Utilities.h
@@ -0,0 +1,206 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 10h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 44702 $   @e \$Date: 2011-01-04 15:54:00 -0700 (Tue, 04 Jan 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F10_UTILITES_H_
+#define _CPU_F10_UTILITES_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// The structure for Software Initiated NB Voltage Transitions
+typedef struct {
+  UINT32  VidCode;          ///< VID code to transition to
+  BOOLEAN SlamMode;         ///< Whether voltage is to be slammed, or stepped
+} SW_VOLT_TRANS_NB;
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F10PmSwVoltageTransition (
+  IN       UINT32 VidCode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+F10PmSwVoltageTransitionServerNb (
+  IN       UINT32 VidCode,
+  IN       BOOLEAN SlamMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT32
+F10SwVoltageTransitionServerNbCore (
+  IN       VOID  *InputData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+F10WaitOutVoltageTransition (
+  IN       BOOLEAN SlamMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+F10GetCurrentVsTimeInUsecs (
+     OUT   UINT32 *VsTimeUsecs,
+  IN       BOOLEAN SlamMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+F10ProgramVSSlamTimeOnSocket (
+  IN       PCI_ADDR             *PciAddress,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+UINT32
+F10GetSlamTimeEncoding (
+  IN       UINT8                HighVoltageVid,
+  IN       UINT8                LowVoltageVid,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+  IN       CONST UINT32         *SlamTimeTable,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+AGESA_STATUS
+F10DisablePstate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8 StateNumber,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+F10TransitionPstate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8              StateNumber,
+  IN       BOOLEAN            WaitForTransition,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+F10GetTscRate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+F10GetCurrentNbFrequency (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+F10LaunchApCore (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT32 SocketNum,
+  IN       UINT32 ModuleNum,
+  IN       UINT32 CoreNum,
+  IN       UINT32 PrimaryCoreNum,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+F10GetPlatformTypeSpecificInfo (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   PLATFORM_FEATS         *Features,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+BOOLEAN
+F10GetNextHtLinkFeatures (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   UINTN                  *Link,
+  IN OUT   PCI_ADDR               *LinkBase,
+     OUT   HT_HOST_FEATS          *HtHostFeats,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+BOOLEAN
+F10NextLinkHasHtPhyFeats (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   PCI_ADDR           *HtHostCapability,
+  IN OUT   UINT32             *Link,
+  IN       HT_PHY_LINK_FEATS  *HtPhyLinkType,
+     OUT   BOOLEAN            *MatchedSublink1,
+     OUT   HT_FREQUENCIES     *Frequency0,
+     OUT   HT_FREQUENCIES     *Frequency1,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+F10SetHtPhyRegister (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       HT_PHY_TYPE_ENTRY_DATA  *HtPhyEntry,
+  IN       PCI_ADDR                 CapabilitySet,
+  IN       UINT32                   Link,
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  );
+
+UINT8
+F10GetNumberOfBoostedPstatesOnCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+#endif  // _CPU_F10_UTILITES_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10WheaInitDataTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10WheaInitDataTables.c
new file mode 100644
index 0000000000..393d3bfc97
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10WheaInitDataTables.c
@@ -0,0 +1,128 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 WHEA initial Data
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuLateInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10WHEAINITDATATABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GetF10WheaInitData (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **F10WheaInitDataPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AMD_HEST_BANK_INIT_DATA F10HestBankInitData[] = {
+  {0xFFFFFFFF,0xFFFFFFFF,0x400,0x401,0x402,0x403},
+  {0xFFFFFFFF,0xFFFFFFFF,0x404,0x405,0x406,0x407},
+  {0xFFFFFFFF,0xFFFFFFFF,0x408,0x409,0x40A,0x40B},
+  {0xFFFFFFFF,0xFFFFFFFF,0x40C,0x40D,0x40E,0x40F},
+  {0xFFFFFFFF,0xFFFFFFFF,0x410,0x411,0x412,0x413},
+  {0xFFFFFFFF,0xFFFFFFFF,0x414,0x415,0x416,0x417},
+};
+
+AMD_WHEA_INIT_DATA F10WheaInitData = {
+  0x000000000,              // AmdGlobCapInitDataLsd
+  0x000000000,              // AmdGlobCapInitDataMsd
+  0x00000003F,              // AmdGlobCtrlInitDataLsd
+  0x000000000,              // AmdGlobCtrlInitDataMsd
+  0x00,                     // AmdMcbClrStatusOnInit
+  0x02,                     // AmdMcbStatusDataFormat
+  0x00,                     // AmdMcbConfWriteEn
+  (sizeof (F10HestBankInitData) / sizeof (F10HestBankInitData[0])), // HestBankNum
+  &F10HestBankInitData[0]   // Pointer to Initial data of HEST Bank
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the family specific WHEA table properties.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  F10WheaInitDataPtr       Points to the family 10h WHEA properties.
+ *  @param[out]  NumberOfElements         Will be one to indicate one structure.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF10WheaInitData (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **F10WheaInitDataPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = 1;
+  *F10WheaInitDataPtr = &F10WheaInitData;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10WorkaroundsTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10WorkaroundsTable.c
new file mode 100644
index 0000000000..b955c1f792
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuF10WorkaroundsTable.c
@@ -0,0 +1,184 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_10 Family Specific Workaround table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x10
+ * @e \$Revision: 57155 $   @e \$Date: 2011-07-28 02:27:47 -0600 (Thu, 28 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "Topology.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10WORKAROUNDSTABLE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * A Family Specific Workaround method, to sync internal node 1 SbiAddr setting.
+ *
+ * @param[in] Data      The table data value (unused in this routine)
+ * @param[in] StdHeader Config handle for library and services
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+STATIC
+F10RevDSyncInternalNode1SbiAddr (
+  IN       UINT32            Data,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32       Socket;
+  UINT32       Module;
+  UINT32       DataOr;
+  UINT32       DataAnd;
+  UINT32       ModuleType;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS AgesaStatus;
+  UINT32       SyncToModule;
+  AP_MAIL_INFO ApMailboxInfo;
+  UINT32       LocalPciRegister;
+
+  ApMailboxInfo.Info = 0;
+
+  GetApMailbox (&ApMailboxInfo.Info, StdHeader);
+  ASSERT (ApMailboxInfo.Fields.Socket < MAX_SOCKETS);
+  ASSERT (ApMailboxInfo.Fields.Module < MAX_DIES);
+  Socket = ApMailboxInfo.Fields.Socket;
+  Module = ApMailboxInfo.Fields.Module;
+  ModuleType = ApMailboxInfo.Fields.ModuleType;
+
+  // sync is just needed on multinode cpu
+  if (ModuleType != 0) {
+    // check if it is internal node 0 of every socket
+    if (Module == 0) {
+      if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &AgesaStatus)) {
+        PciAddress.Address.Function = FUNC_3;
+        PciAddress.Address.Register = 0x1E4;
+        // read internal node 0 F3x1E4[6:4]
+        LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+        DataOr = LocalPciRegister & ((UINT32) (7 << 4));
+        DataAnd = ~(UINT32) (7 << 4);
+        for (SyncToModule = 1; SyncToModule < GetPlatformNumberOfModules (); SyncToModule++) {
+          if (GetPciAddress (StdHeader, Socket, SyncToModule, &PciAddress, &AgesaStatus)) {
+            PciAddress.Address.Function = FUNC_3;
+            PciAddress.Address.Register = 0x1E4;
+            // sync the other internal node F3x1E4[6:4]
+            LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+            LocalPciRegister &= DataAnd;
+            LocalPciRegister |= DataOr;
+            LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+          }
+        }
+      }
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  F a m i l y  S p e c i f i c  W o r k a r o u n d    T a b l e s
+// -----------------------------------------------------------------
+
+STATIC CONST FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER ROMDATA F10Workarounds[] =
+{
+// F0x6C - Link Initialization Control Register
+// Request for warm reset in AmdInitEarly
+// [5, BiosRstDet] = 1b
+  {
+    FamSpecificWorkaround,
+    {
+      AMD_FAMILY_10,                        // CpuFamily
+      AMD_F10_ALL                           // CpuRevision
+    },
+	{AMD_PF_ALL},                             // platformFeatures
+    {{
+      SetWarmResetAtEarly,                  // function call
+      0x00000000,                           // data
+    }}
+  },
+  // Internal Node 1 SbiAddr sync for RevD
+  {
+    FamSpecificWorkaround,
+    {
+      AMD_FAMILY_10_HY,
+      AMD_F10_HY_ALL
+    },
+    {AMD_PF_ALL},
+    {{
+      F10RevDSyncInternalNode1SbiAddr,
+      0x00000000
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F10WorkaroundsTable = {
+  PrimaryCores,
+  (sizeof (F10Workarounds) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *)F10Workarounds,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/F15PackageType.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/F15PackageType.h
new file mode 100644
index 0000000000..5c67a23a6b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/F15PackageType.h
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Package Type Definitions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15F
+ * @e \$Revision: 59564 $   @e \$Date: 2011-09-26 12:33:51 -0600 (Mon, 26 Sep 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _F15_PACKAGE_TYPE_H_
+#define _F15_PACKAGE_TYPE_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+// Below equates are defined to cooperate with LibAmdGetPackageType.
+#define PACKAGE_TYPE_AM3r2                  (1 << 1)
+#define PACKAGE_TYPE_G34                    (1 << 3)
+#define PACKAGE_TYPE_C32                    (1 << 5)
+
+#define PACKAGE_TYPE_SCM                    (PACKAGE_TYPE_AM3r2 | PACKAGE_TYPE_C32)
+#define PACKAGE_TYPE_MCM                    (PACKAGE_TYPE_G34)
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+#endif  // _F15_PACKAGE_TYPE_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/F15PstateHpcMode.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/F15PstateHpcMode.c
new file mode 100644
index 0000000000..043845918f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/F15PstateHpcMode.c
@@ -0,0 +1,208 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 P-state HPC mode Initialization
+ *
+ * Enables High performance Computing mode.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 57421 $   @e \$Date: 2011-08-03 19:59:42 -0600 (Wed, 03 Aug 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "cpuF15PowerMgmt.h"
+#include "CommonReturns.h"
+#include "cpuPstateHpcMode.h"
+#include "cpuPstateTables.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_F15PSTATEHPCMODE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * entry point for enabling High Performance Computing.
+ *
+ * This function must be run after P-states initialization and before enabling low power P-states
+ *
+ * @param[in]  PstateHpcModeServices   The current CPU's family services.
+ * @param[in]  PlatformConfig          Contains the runtime modifiable feature input data.
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ * @retval     AGESA_SUCCESS           Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F15InitializePstateHpcMode (
+  IN       PSTATE_HPC_MODE_FAMILY_SERVICES  *PstateHpcModeServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT8   OriginalPstate;
+  UINT8   X;
+  UINT32  Socket;
+  UINT32  Module;
+  UINT32  Core;
+  UINT32  SocketCount;
+  UINT32  i;
+  UINT64  MsrData;
+  PCI_ADDR  PciAddr;
+  AGESA_STATUS IgnoredSts;
+  AGESA_STATUS Flag;
+  F15_CPB_CTRL_REGISTER CpbCtrl;
+  CLK_PWR_TIMING_CTRL2_REGISTER CPTC2;
+  HTC_REGISTER Htc;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  LOCATE_HEAP_PTR        LocateHeapParams;
+  PSTATE_LEVELING        *PStateLevelingBuffer;
+  PSTATE_LEVELING        *PStateLevelingBufferTemp;
+
+  Flag = AGESA_SUCCESS;
+  // Locate P-State data buffer
+  LocateHeapParams.BufferHandle = AMD_PSTATE_DATA_BUFFER_HANDLE;
+  if (HeapLocateBuffer (&LocateHeapParams, StdHeader) != AGESA_SUCCESS) {
+    Flag = AGESA_ERROR;
+    PStateLevelingBuffer = NULL;
+    SocketCount = 1;
+  } else {
+    PStateLevelingBuffer = ((S_CPU_AMD_PSTATE *) (LocateHeapParams.BufferPtr))->PStateLevelingStruc;
+    SocketCount = ((S_CPU_AMD_PSTATE *) (LocateHeapParams.BufferPtr))->TotalSocketInSystem;
+  }
+
+  // Step1. Read MSRC001_0063[CurPstate] and store the value in OriginalPstate.
+  LibAmdMsrRead (MSR_PSTATE_STS, &MsrData, StdHeader);
+  OriginalPstate = (UINT8) (((PSTATE_STS_MSR *) &MsrData)->CurPstate);
+  // Step2. Write 0 to MSRC001_0062[PstateCmd].
+  // Step3. Wait for MSRC001_0063[CurPstate] == 0.
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) 0, (BOOLEAN) TRUE, StdHeader);
+  // Step4. If D18F4x15C[NumBoostStates] != D18F3xDC[PstateMaxVal], execute the following sequence
+  //   4.A  Set X = D18F4x15C[NumBoostStates].
+  //   4.B  If X+1 == D18F3xDC[PstateMaxVal], go to step 5.
+  //   4.C  Copy MSRC001_00[6B:64] indexed by P-state X to MSRC001_00[6B:64] indexed by P-state X+1.
+  //   4.D  Write 0b to PstateEn from MSRC001_00[6B:64] indexed by P-state X+1.
+  //   4.E  Set X = X+1 and go to step B.
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+  GetPciAddress (StdHeader, Socket, Module, &PciAddr, &IgnoredSts);
+  PciAddr.Address.Function = FUNC_4;
+  PciAddr.Address.Register = CPB_CTRL_REG;
+  LibAmdPciRead (AccessWidth32, PciAddr, &CpbCtrl, StdHeader);  // F4x15C
+
+  PciAddr.Address.Function = FUNC_3;
+  PciAddr.Address.Register = CPTC2_REG;
+  LibAmdPciRead (AccessWidth32, PciAddr, &CPTC2, StdHeader);    // F3xDC
+
+  // In case that F3xDC[PstateMaxVal] was increased by Low Power Pstate function during the first time of running that function.
+  // Get the real PstateMaxVal by checking C001_00[6B:64][PsEnable]
+  while (CPTC2.PstateMaxVal != 0) {
+    LibAmdMsrRead ((PS_REG_BASE + CPTC2.PstateMaxVal), &MsrData, StdHeader);
+    if ((MsrData & BIT63) == BIT63) {
+      break;
+    }
+    CPTC2.PstateMaxVal--;
+  }
+
+  if (CpbCtrl.NumBoostStates != CPTC2.PstateMaxVal) {
+    X = (UINT8) CpbCtrl.NumBoostStates;
+    while ((X + 1) < (UINT8) CPTC2.PstateMaxVal) {
+      LibAmdMsrRead ((PS_REG_BASE + X), &MsrData, StdHeader);
+      MsrData &= ~BIT63;
+      LibAmdMsrWrite ((PS_REG_BASE + X + 1), &MsrData, StdHeader);
+      // Make sure Agesa doesn't declared the P-states modified by these algorithms to the OS
+      if (PStateLevelingBuffer != NULL) {
+        PStateLevelingBufferTemp = PStateLevelingBuffer;
+        for (i = 0; i < SocketCount; i++) {
+          PStateLevelingBufferTemp->PStateCoreStruct[0].PStateStruct[X + 1].PStateEnable = 0;
+          //Calculate next node buffer address
+          PStateLevelingBufferTemp = (PSTATE_LEVELING *) ((UINT8 *) PStateLevelingBufferTemp + (UINTN) sizeof (PSTATE_LEVELING) + (UINTN) (PStateLevelingBufferTemp->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+        }
+      }
+      X++;
+    }
+  }
+  // Step5. Write OriginalPstate to MSRC001_0062[PstateCmd].
+  // Step6. Wait for MSRC001_0063[CurPstate] == OriginalPstate.
+  FamilySpecificServices->TransitionPstate (FamilySpecificServices, OriginalPstate, (BOOLEAN) TRUE, StdHeader);
+  // Step7. Write D18F3x64[HtcPstateLimit] with the value from D18F3xDC[PstateMaxVal]
+  PciAddr.Address.Register = HTC_REG;
+  LibAmdPciRead (AccessWidth32, PciAddr, &Htc, StdHeader);      // F3x64
+  Htc.HtcPstateLimit = CPTC2.PstateMaxVal;
+  LibAmdPciWrite (AccessWidth32, PciAddr, &Htc, StdHeader);     // F3x64
+
+  return Flag;
+}
+
+
+
+CONST PSTATE_HPC_MODE_FAMILY_SERVICES ROMDATA F15PstateHpcSupport =
+{
+  0,
+  F15InitializePstateHpcMode
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrC6State.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrC6State.c
new file mode 100644
index 0000000000..5863af857b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrC6State.c
@@ -0,0 +1,186 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi C6 C-state feature support functions.
+ *
+ * Provides the functions necessary to initialize the C6 feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFeatures.h"
+#include "cpuC6State.h"
+#include "cpuApicUtilities.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "OptionFamily15hEarlySample.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORC6STATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern F15_OR_ES_C6_SUPPORT F15OrEarlySampleC6Support;
+extern F15_OR_ES_MCU_PATCH F15OrEarlySampleLoadMcuPatch;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+F15OrReloadMicrocodePatchAfterMemInit (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Is C6 supported on this CPU
+ *
+ * @param[in]    C6Services         Pointer to this CPU's C6 family services.
+ * @param[in]    Socket             This core's zero-based socket number.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               C6 state is supported.
+ * @retval       FALSE              C6 state is not supported.
+ *
+ */
+BOOLEAN
+STATIC
+F15OrIsC6Supported (
+  IN       C6_FAMILY_SERVICES      *C6Services,
+  IN       UINT32                  Socket,
+  IN       PLATFORM_CONFIGURATION  *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  )
+{
+  BOOLEAN  IsEnabled;
+
+  IsEnabled = TRUE;
+  IsEnabled = IsFeatureEnabled (IoCstate, PlatformConfig, StdHeader);
+
+  F15OrEarlySampleC6Support.F15OrIsC6SupportedHook (&IsEnabled, StdHeader);
+
+  return IsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable C6 on a family 15h CPU.
+ *
+ * @param[in]    C6Services         Pointer to this CPU's C6 family services.
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F15OrInitializeC6 (
+  IN       C6_FAMILY_SERVICES *C6Services,
+  IN       UINT64 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32   LocalPciRegister;
+  UINT32   PciMask;
+  PCI_ADDR PciAddress;
+
+  if ((EntryPoint & CPU_FEAT_AFTER_PM_INIT) != 0) {
+    // Initialize F4x118
+    // bits[24] PwrGateEnCstAct1 = 1
+    PciAddress.Address.Function = FUNC_4;
+    PciAddress.Address.Register = CSTATE_CTRL1_REG;
+    LocalPciRegister = 0x01000000;
+    PciMask = 0xFFFFFFFF;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, PciMask, LocalPciRegister, StdHeader);
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/**
+ *  Reload microcode patch after memory is initialized.
+ *
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+F15OrReloadMicrocodePatchAfterMemInit (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  F15OrEarlySampleLoadMcuPatch.F15OrUpdateMcuPatchHook (StdHeader);
+}
+
+CONST C6_FAMILY_SERVICES ROMDATA F15OrC6Support =
+{
+    0,
+    F15OrIsC6Supported,
+    F15OrInitializeC6,
+    F15OrReloadMicrocodePatchAfterMemInit
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrCpb.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrCpb.c
new file mode 100644
index 0000000000..f6c9f5f0c1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrCpb.c
@@ -0,0 +1,183 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 CPB Initialization
+ *
+ * Enables core performance boost.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/F15/OR
+ * @e \$Revision: 54493 $   @e \$Date: 2011-06-08 15:21:06 -0600 (Wed, 08 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "cpuFeatures.h"
+#include "cpuCpb.h"
+#include "F15PackageType.h"
+#include "OptionFamily15hEarlySample.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORCPB_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern F15_OR_ES_CPB_SUPPORT F15OrEarlySampleCpbSupport;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * BSC entry point for checking whether or not CPB is supported.
+ *
+ * @param[in]  CpbServices             The current CPU's family services.
+ * @param[in]  PlatformConfig          Contains the runtime modifiable feature input data.
+ * @param[in]  Socket                  Zero based socket number to check.
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ * @retval     TRUE                    CPB is supported.
+ * @retval     FALSE                   CPB is not supported.
+ *
+ */
+BOOLEAN
+STATIC
+F15OrIsCpbSupported (
+  IN       CPB_FAMILY_SERVICES    *CpbServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       UINT32                 Socket,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       CpbControl;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredSts;
+  BOOLEAN  IsEnabled;
+
+  IsEnabled = TRUE;
+
+  GetPciAddress (StdHeader, Socket, 0, &PciAddress, &IgnoredSts);
+  PciAddress.Address.Function = FUNC_4;
+  PciAddress.Address.Register = CPB_CTRL_REG;
+  LibAmdPciRead (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+  IsEnabled = (BOOLEAN) (((CPB_CTRL_REGISTER *) (&CpbControl))->NumBoostStates != 0);
+
+  F15OrEarlySampleCpbSupport.F15OrIsCpbSupportedHook (&IsEnabled, StdHeader);
+
+  return IsEnabled;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * BSC entry point for for enabling Core Performance Boost.
+ *
+ * Set up D18F4x15C[BoostSrc] and start the PDMs according to the BKDG.
+ *
+ * @param[in]  CpbServices             The current CPU's family services.
+ * @param[in]  PlatformConfig          Contains the runtime modifiable feature input data.
+ * @param[in]  EntryPoint              Current CPU feature dispatch point.
+ * @param[in]  Socket                  Zero based socket number to check.
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ * @retval     AGESA_SUCCESS           Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F15OrInitializeCpb (
+  IN       CPB_FAMILY_SERVICES    *CpbServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       UINT64                 EntryPoint,
+  IN       UINT32                 Socket,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       CpbControl;
+  UINT32       Module;
+  UINT32       PackageType;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredSts;
+
+  if ((EntryPoint & (CPU_FEAT_BEFORE_PM_INIT | CPU_FEAT_INIT_LATE_END | CPU_FEAT_S3_LATE_RESTORE_END)) != 0) {
+    for (Module = 0; Module < (UINT8)GetPlatformNumberOfModules (); Module++) {
+      PackageType = LibAmdGetPackageType (StdHeader);
+      GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+      PciAddress.Address.Function = FUNC_4;
+      PciAddress.Address.Register = CPB_CTRL_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+      if (PackageType == PACKAGE_TYPE_AM3r2) {
+        ((CPB_CTRL_REGISTER *) (&CpbControl))->BoostSrc = 1;
+      } else {
+        if ((EntryPoint & CPU_FEAT_BEFORE_PM_INIT) != 0) {
+          ((CPB_CTRL_REGISTER *) (&CpbControl))->BoostSrc = 1;
+        }
+      }
+      LibAmdPciWrite (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+    }
+  }
+  return AGESA_SUCCESS;
+}
+
+CONST CPB_FAMILY_SERVICES ROMDATA F15OrCpbSupport =
+{
+  0,
+  F15OrIsCpbSupported,
+  F15OrInitializeCpb
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrEarlySamples.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrEarlySamples.c
new file mode 100644
index 0000000000..2f7a061df0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrEarlySamples.c
@@ -0,0 +1,834 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 OR early sample support.
+ *
+ * Provides the code and data required to support pre-production silicon.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "cpuEarlyInit.h"
+#include "cpuFamilyTranslation.h"
+#include "F15OrUtilities.h"
+#include "cpuF15Utilities.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "GeneralServices.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15OREARLYSAMPLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+typedef union {
+  UINT64           RawData;
+  PATCH_LOADER_MSR BitFields;
+} PATCH_LOADER;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+BOOLEAN
+F15OrEarlySamplesLoadMicrocode (
+  IN       MICROCODE_PATCH    *MicrocodePatchPtr,
+  IN OUT   AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+F15OrHtcInitEarlySampleHook (
+  IN OUT   UINT32  *HtcRegister,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+F15OrIsCpbDisabledEarlySample (
+  IN OUT   BOOLEAN            *IsEnabled,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+F15OrIsC6DisabledEarlySample (
+  IN OUT   BOOLEAN            *IsEnabled,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+F15OrEarlySamplesAvoidNbCyclesStart (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   UINT64            *SavedMsrValue
+  );
+
+VOID
+F15OrEarlySamplesAvoidNbCyclesEnd (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT64            *SavedMsrValue
+  );
+
+VOID
+F15OrEarlySamplesAfterPatchLoaded (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN       BOOLEAN IsPatchLoaded
+  );
+
+BOOLEAN
+F15OrEarlySamplesLoadMicrocodePatch (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+F15OrB0WeightsInit (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          D A T A    D E C L A R A T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*-----------------------------
+ * Early Sample PCI registers
+ *-----------------------------
+ */
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F15OrEarlySamplePciRegisters[] =
+{
+// F3x188 - NB Configuration 2 Register
+// bit[30] Reserved = 1 Erratum #620, only on OR A0, A1 and B0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_LT_B1                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x188), // Address
+      0x40000000,                           // regData
+      0x40000000,                           // regMask
+    }}
+  },
+// F3x18C - Reserved
+// bit[31] Reserved = 1 Erratum #603, only on OR A0, A1 and B0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_LT_B1                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x18C), // Address
+      0x80000000,                           // regData
+      0x80000000,                           // regMask
+    }}
+  },
+
+// F3x1B8 - L3 Control 1
+// bit[7]  Reserved = 1, Erratum #574
+// bit[29] Reserved = 1, Erratum #574
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_Ax                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,                 // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1B8), // Address
+      0x20000080,                           // regData
+      0x20000080,                           // regMask
+    }}
+  },
+// F4x110 - Sample and Residency Timers
+// bits[20:13] MinResTmr = 0x64
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15_OR,                   // CpuFamily
+      AMD_F15_OR_Ax                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x110), // Address
+      0x000C8000,                           // regData
+      0x001FE000,                           // regMask
+    }}
+  },
+// F4x1A0 - Reserved
+// bits[31:0]  Reserved = 4
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_A0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,                 // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x1A0),  // Address
+      0x00000004,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+// F4x1A4 - Reserved
+// bits[31:0]  Reserved = 0x24 Erratum #553
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_A0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,                 // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x1A4),  // Address
+      0x00000024,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrEarlySamplePciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F15OrEarlySamplePciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F15OrEarlySamplePciRegisters,
+};
+
+/*-----------------------------
+ * Early Sample MSR registers
+ *-----------------------------
+ */
+
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F15OrEarlySampleMsrRegisters[] =
+{
+// MSR_LS_CFG (0xC0011020)
+// bit[0] = 1, Erratum #500 for OR-A0 only
+// bit[4] = 1, Erratum #501 for OR-A0 only
+// bit[28] DisSS = 1, Erratum #495, #496 for OR-A0 only
+// bit[30] = 1, Erratum #544 for OR-A0 only
+// bit[62] = 1, Erratum #494 for OR-A0 only
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_A0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_LS_CFG,                           // MSR Address
+      0x4000000050000011,                   // OR Mask
+      0x4000000050000011,                   // NAND Mask
+    }}
+  },
+// MSR_DC_CFG (0xC0011022)
+// bit[13] DisHwPf = 1, Erratum #498, OR-A0 only
+// bit[10] = 1, Erratum #575, OR-A0 only
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_A0                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_DC_CFG,                           // MSR Address
+      0x0000000000002400,                   // OR Mask
+      0x0000000000002400,                   // NAND Mask
+    }}
+  },
+// MSR_DE_CFG (0xC0011029)
+// bit[7:2] = 111111b, Erratum #497, OR-A0 only
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                    // CpuFamily
+      AMD_F15_OR_A0                     // CpuRevision
+    },
+    {AMD_PF_ALL},                       // platformFeatures
+    {{
+      MSR_DE_CFG,                       // MSR Address - Shared
+      0x00000000000000FC,               // OR Mask
+      0x00000000000000FC,               // NAND Mask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrEarlySampleMsrRegisterTable = {
+  AllCores,
+  (sizeof (F15OrEarlySampleMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F15OrEarlySampleMsrRegisters,
+};
+
+/*-----------------------------
+ * Early Sample Shared MSR registers
+ *-----------------------------
+ */
+
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F15OrEarlySampleSharedMsrRegisters[] =
+{
+// MSR_CU_CFG2 (0xC001102A)
+// bit[27] = 1, Erratum #572, OR-Ax only
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                    // CpuFamily
+      AMD_F15_OR_Ax                     // CpuRevision
+    },
+    {AMD_PF_ALL},                       // platformFeatures
+    {{
+      MSR_CU_CFG2,                      // MSR Address - Shared
+      0x0000000008000000,               // OR Mask
+      0x0000000008000000,               // NAND Mask
+    }}
+  },
+
+// MSR_CU_CFG3 (0xC001102B)
+// bit[34] Reserved = 1, Erratum #568, OR-Ax only
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                    // CpuFamily
+      AMD_F15_OR_Ax                     // CpuRevision
+    },
+    {AMD_PF_ALL},                       // platformFeatures
+    {{
+      MSR_CU_CFG3,                      // MSR Address
+      0x0000000400000000,               // OR Mask
+      0x0000000400000000,               // NAND Mask
+    }}
+  },
+// MSR_C001_1070
+// bit[41] = 0, Erratum #597, OR-Ax only
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                    // CpuFamily
+      AMD_F15_OR_Ax                     // CpuRevision
+    },
+    {AMD_PF_ALL},                       // platformFeatures
+    {{
+      MSR_C001_1070,                    // MSR Address - Shared
+      0x0000000000000000,               // OR Mask
+      0x0000020000000000,               // NAND Mask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrEarlySampleSharedMsrRegisterTable = {
+  CorePairPrimary,
+  (sizeof (F15OrEarlySampleSharedMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F15OrEarlySampleSharedMsrRegisters,
+};
+
+/*-----------------------------
+ * Early Sample Workarounds
+ *-----------------------------
+ */
+
+STATIC CONST FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER ROMDATA F15OrEarlySampleWorkarounds[] =
+{
+  // HT PHY DLL Compensation setting for Ax
+  {
+    FamSpecificWorkaround,
+    {
+      AMD_FAMILY_15,
+      AMD_F15_OR_Ax
+    },
+    {AMD_PF_ALL},
+    {{
+      F15HtPhyOverrideDllCompensation,
+      0x00000000
+    }}
+  },
+  // CPU TDP Limit 2 setting for Ax
+  {
+    FamSpecificWorkaround,
+    {
+      AMD_FAMILY_15,
+      AMD_F15_OR_Ax
+    },
+    {AMD_PF_ALL},
+    {{
+      F15OrOverrideNodeTdpLimit,
+      0x00000000
+    }}
+  },
+  // CPU Node TDP Accumulator Throttle Threshold setting for Ax
+  {
+    FamSpecificWorkaround,
+    {
+      AMD_FAMILY_15_OR,
+      AMD_F15_OR_Ax
+    },
+    {AMD_PF_ALL},
+    {{
+      F15OrOverrideNodeTdpAccumulatorThrottleThreshold,
+      0x00000000
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrEarlySampleWorkaroundsTable = {
+  PrimaryCores,
+  (sizeof (F15OrEarlySampleWorkarounds) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *)F15OrEarlySampleWorkarounds,
+};
+
+/*-----------------------------
+ * Early Sample shared MSRs with Special Programming Requirements Table
+ *-----------------------------
+ */
+
+STATIC CONST FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER ROMDATA F15OrEarlySampleSharedMsrWorkarounds[] =
+{
+  // MSRC001_1072
+  {
+    FamSpecificWorkaround,
+    {
+      AMD_FAMILY_15_OR,
+      AMD_F15_OR_B0
+    },
+    {AMD_PF_ALL},
+    {{
+      F15OrB0WeightsInit,
+      0x00000000
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrEarlySampleSharedMsrWorkaroundTable = {
+  CorePairPrimary,
+  (sizeof (F15OrEarlySampleSharedMsrWorkarounds) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F15OrEarlySampleSharedMsrWorkarounds,
+};
+
+
+CONST UINT32 ROMDATA F15OrB0WeightsTable [] = {
+  0x1300005A,              //MSRC001_1072_x00
+  0x10ABD100,              //MSRC001_1072_x01
+  0xBF1A1A44,              //MSRC001_1072_x02
+  0xC4DABEA4,              //MSRC001_1072_x03
+  0x147B7B6A,              //MSRC001_1072_x04
+  0x320C0C00,              //MSRC001_1072_x05
+  0xE6D6C6DC,              //MSRC001_1072_x06
+  0x00911C06,              //MSRC001_1072_x07
+  0x1F473727,              //MSRC001_1072_x08
+  0x9FA3A32B,              //MSRC001_1072_x09
+  0xDFCFBFAF,              //MSRC001_1072_x0A
+  0xCFBFAF9F,              //MSRC001_1072_x0B
+  0x606060DF,              //MSRC001_1072_x0C
+  0x00000060,              //MSRC001_1072_x0D
+  0xBAAA9A00,              //MSRC001_1072_x0E
+  0xFF00DACA,              //MSRC001_1072_x0F
+  0xFEFEFF64,              //MSRC001_1072_x10
+  0x41FCFEFE,              //MSRC001_1072_x11
+  0xE14C2F0D,              //MSRC001_1072_x12
+  0x95A371EA,              //MSRC001_1072_x13
+  0x002EE260,              //MSRC001_1072_x14
+  0x00F907D2,              //MSRC001_1072_x15
+  0xF9F2A5A5,              //MSRC001_1072_x16
+  0x97C100E3,              //MSRC001_1072_x17
+  0x91C5B577,              //MSRC001_1072_x18
+  0x95C1B1A1,              //MSRC001_1072_x19
+  0x68584800,              //MSRC001_1072_x1A
+  0x67000000,              //MSRC001_1072_x1B
+  0xB2003109,              //MSRC001_1072_x1C
+  0x3F8DCDC4,              //MSRC001_1072_x1D
+  0xD2D4D409,              //MSRC001_1072_x1E
+  0x090000D2,              //MSRC001_1072_x1F
+  0x00160000,              //MSRC001_1072_x20
+  0x0000E300               //MSRC001_1072_x21
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Early sample hook point during HTC initialization
+ *
+ *  @param[in,out] HtcRegister             Value of F3x64 to be written.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+F15OrHtcInitEarlySampleHook (
+  IN OUT   UINT32  *HtcRegister,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 MsrAddr;
+  UINT64 Msr;
+
+  if (((HTC_REGISTER *) HtcRegister)->HtcPstateLimit == 0) {
+    // HtcPstateLimit is set to Pb0.  Reprogram it to the minimum enabled P-state with
+    // with NbPstate = 0
+    for (MsrAddr = PS_MAX_REG; MsrAddr > PS_MIN_REG; MsrAddr--) {
+      LibAmdMsrRead (MsrAddr, &Msr, StdHeader);
+      if ((((PSTATE_MSR *) &Msr)->PsEnable == 1) && (((PSTATE_MSR *) &Msr)->NbPstate == 0)) {
+        break;
+      }
+    }
+    ((HTC_REGISTER *) HtcRegister)->HtcPstateLimit = (MsrAddr - PS_MIN_REG);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Is CPB supported on this CPU
+ *
+ * @param[in,out] IsEnabled          Whether or not CPB should be enabled.
+ * @param[in]     StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+F15OrIsCpbDisabledEarlySample (
+  IN OUT   BOOLEAN            *IsEnabled,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  CPU_LOGICAL_ID LogicalId;
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+  // Check if this CPU is OR A0, then disable CPB support.
+  if ((LogicalId.Revision & AMD_F15_OR_A0) != 0) {
+    *IsEnabled = FALSE;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Is C6 supported on this CPU
+ *
+ * @param[in,out] IsEnabled          Whether or not C6 should be enabled.
+ * @param[in]     StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+F15OrIsC6DisabledEarlySample (
+  IN OUT   BOOLEAN            *IsEnabled,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  CPU_LOGICAL_ID LogicalId;
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+  // Check if this CPU is OR A0, then disable C6 support.
+  if ((LogicalId.Revision & AMD_F15_OR_A0) != 0) {
+    *IsEnabled = FALSE;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Update the weights for affected OR B0 CPUs.
+ *
+ * This function implements a workaround for OR B0 when applicable.
+ *
+ * @param[in]   Data         The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in]   StdHeader    Config handle for library and services.
+ *
+ */
+VOID
+F15OrB0WeightsInit (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT32       i;
+  UINT32       ProductInfo;
+  UINT64       LocalMsr;
+  PCI_ADDR     PciAddress;
+
+  if (IsWarmReset (StdHeader)) {
+    OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = PRCT_INFO_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &ProductInfo, StdHeader);
+
+    if ((ProductInfo & BIT31) == 0) {
+      for (i = 0; i < ((sizeof F15OrB0WeightsTable) / (sizeof F15OrB0WeightsTable[0])); i++) {
+        LocalMsr = (((((UINT64) F15OrB0WeightsTable[i]) << 32) | i) | BIT14);
+        LibAmdMsrWrite (0xC0011072, &LocalMsr, StdHeader);
+      }
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  Workaround to avoid patch loading from causing NB cycles
+ *
+ *
+ *  @param[in,out] StdHeader     - Config handle for library and services.
+ *  @param[in,out] SavedMsrValue - Saved a MSR value
+ *
+ */
+VOID
+F15OrEarlySamplesAvoidNbCyclesStart (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   UINT64            *SavedMsrValue
+  )
+{
+  UINT64         MsrValue;
+  CPU_LOGICAL_ID LogicalId;
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+  // Check if this CPU is OR Ax, expected fix in OR-B0
+  if ((LogicalId.Revision & AMD_F15_OR_Ax) != 0) {
+    // Workaround for F15 OR-Ax workaround to avoid patch loading from causing NB cycles
+    // Start - Set MSR C001_102A [8]
+    LibAmdMsrRead (MSR_BU_CFG2, SavedMsrValue, StdHeader);
+    MsrValue = *SavedMsrValue | BIT8;
+    LibAmdMsrWrite (MSR_BU_CFG2, &MsrValue, StdHeader);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  Workaround to avoid patch loading from causing NB cycles
+ *
+ *
+ *  @param[in,out] StdHeader     - Config handle for library and services.
+ *  @param[in] SavedMsrValue - Saved a MSR value
+ *
+ */
+VOID
+F15OrEarlySamplesAvoidNbCyclesEnd (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT64            *SavedMsrValue
+  )
+{
+  CPU_LOGICAL_ID LogicalId;
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+  if ((LogicalId.Revision & AMD_F15_OR_Ax) != 0) {
+    // Restore Workaround for F15 OR-Ax workaround to avoid patch loading from causing NB cycles
+    // End - Restore MSR C001_102A
+    LibAmdMsrWrite (MSR_BU_CFG2, SavedMsrValue, StdHeader);
+  }
+
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  Workaround for Ax processors after patch is loaded.
+ *
+ *
+ *  @param[in] StdHeader     - Config handle for library and services.
+ *  @param[in] IsPatchLoaded - Is patch loaded
+ *
+ */
+VOID
+F15OrEarlySamplesAfterPatchLoaded (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN       BOOLEAN IsPatchLoaded
+  )
+{
+  UINT64         MsrValue;
+  CPU_LOGICAL_ID LogicalId;
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+
+  // MSR C001_1023[4:3] = 11b
+  // Erratum #502, OR-A0 only after microcode patch has been loaded
+  if (((LogicalId.Revision & AMD_F15_OR_A0) != 0) && (IsPatchLoaded)) {
+    LibAmdMsrRead (MSR_CU_CFG, &MsrValue, StdHeader);
+    MsrValue |= 0x18;
+    LibAmdMsrWrite (MSR_CU_CFG, &MsrValue, StdHeader);
+  }
+
+  // Erratum #590, OR-A1 only, if any patch is applied
+  // MSR C001_0028 = 0x2E00_0080
+  // MSR C001_0029 = 0xFE00_0080
+  // MSR C001_002C = 0x0400_1029
+  if (((LogicalId.Revision & AMD_F15_OR_A1) != 0) && (IsPatchLoaded)) {
+    MsrValue = 0x2E000080;
+    LibAmdMsrWrite (0xC0010028, &MsrValue, StdHeader);
+
+    MsrValue = 0xFE000080;
+    LibAmdMsrWrite (0xC0010029, &MsrValue, StdHeader);
+
+    MsrValue = 0x04001029;
+    LibAmdMsrWrite (0xC001002C, &MsrValue, StdHeader);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  Update microcode patch in current processor.
+ *
+ *  Then reads the patch id, and compare it to the expected, in the Microprocessor
+ *  patch block.
+ *
+ *  @param[in] StdHeader   - Config handle for library and services.
+ *
+ *  @retval    TRUE   - Patch Loaded Successfully.
+ *  @retval    FALSE  - Patch Did Not Get Loaded.
+ *
+ */
+BOOLEAN
+F15OrEarlySamplesLoadMicrocodePatch (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8    PatchNumber;
+  UINT8    TotalPatches;
+  UINT16   ProcessorEquivalentId;
+  BOOLEAN  Status;
+  MICROCODE_PATCH **MicrocodePatchPtr;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  Status = FALSE;
+
+  if (IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, StdHeader)) {
+    // Get the patch pointer
+    GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+    FamilySpecificServices->GetMicroCodePatchesStruct (FamilySpecificServices, (const VOID **) &MicrocodePatchPtr, &TotalPatches, StdHeader);
+
+    IDS_OPTION_HOOK (IDS_UCODE, &TotalPatches, StdHeader);
+
+    // Get the processor microcode path equivalent ID
+    if (GetPatchEquivalentId (&ProcessorEquivalentId, StdHeader)) {
+      // parse the patch table to see if we have one for the current cpu
+      for (PatchNumber = 0; PatchNumber < TotalPatches; PatchNumber++) {
+        if (ValidateMicrocode (MicrocodePatchPtr[PatchNumber], ProcessorEquivalentId, StdHeader)) {
+          if (F15OrEarlySamplesLoadMicrocode (MicrocodePatchPtr[PatchNumber], StdHeader)) {
+            Status = TRUE;
+          } else {
+            PutEventLog (AGESA_ERROR,
+                         CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED,
+                         0, 0, 0, 0, StdHeader);
+          }
+          break; // Once we find a microcode patch that matches the processor, exit the for loop
+        }
+      }
+    }
+  }
+  return Status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  F15OrEarlySamplesLoadMicrocode
+ *
+ *    Update microcode patch in current processor, then reads the
+ *    patch id, and compare it to the expected, in the Microprocessor
+ *    patch block.
+ *
+ *    Note: This is a special version of the normal LoadMicrocode()
+ *    function which lives in cpuMicrocodePatch.c. This version
+ *    implements a workaround (on Or-B0 only) before applying the
+ *    microcode patch.
+ *
+ *    @param[in]       MicrocodePatchPtr  - Pointer to Microcode Patch.
+ *    @param[in,out]   StdHeader          - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ *    @retval          TRUE  - Patch Loaded Successfully.
+ *    @retval          FALSE - Patch Did Not Get Loaded.
+ *
+ */
+BOOLEAN
+F15OrEarlySamplesLoadMicrocode (
+  IN       MICROCODE_PATCH    *MicrocodePatchPtr,
+  IN OUT   AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32       MicrocodeVersion;
+  UINT64       MsrData;
+  PATCH_LOADER PatchLoaderMsr;
+  CPU_LOGICAL_ID LogicalId;
+
+  // Load microcode patch into CPU
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+  PatchLoaderMsr.RawData = (UINT64) MicrocodePatchPtr;
+  PatchLoaderMsr.BitFields.SBZ = 0;
+  // Check if this CPU is OR-B0, expected fix in OR-B1
+  if ((LogicalId.Revision & AMD_F15_OR_B0) != 0) {
+    LibAmdMsrRead (MSR_BR_FROM, &MsrData, StdHeader);
+  }
+
+  LibAmdMsrWrite (MSR_PATCH_LOADER, &PatchLoaderMsr.RawData, StdHeader);
+
+  // Do ucode patch Authentication
+  // Read microcode version back from CPU, determine if
+  // it is the same patch level as contained in the source
+  // microprocessor patch block passed in
+  GetMicrocodeVersion (&MicrocodeVersion, StdHeader);
+  if (MicrocodeVersion == MicrocodePatchPtr->PatchID) {
+    return (TRUE);
+  } else {
+    return (FALSE);
+  }
+}
+
+/*---------------------------------------------------------------------------------------
+ *                           L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrEquivalenceTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrEquivalenceTable.c
new file mode 100644
index 0000000000..78057a7847
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrEquivalenceTable.c
@@ -0,0 +1,135 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Bulldozer Equivalence Table related data
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15OREQUIVALENCETABLE_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF15OrMicrocodeEquivalenceTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **OrEquivalenceTablePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST UINT16 ROMDATA CpuF15OrMicrocodeEquivalenceTable[] =
+{
+  0x6012, 0x6012,
+  0x6011, 0x6011,
+  0x6010, 0x6010,
+  0x6001, 0x6001,
+  0x6000, 0x6000
+};
+
+// Unencrypted equivalent
+STATIC CONST UINT16 ROMDATA CpuF15OrUnEncryptedMicrocodeEquivalenceTable[] =
+{
+  0x6012, 0x6812,
+  0x6011, 0x6811,
+  0x6010, 0x6810,
+  0x6001, 0x6801,
+  0x6000, 0x6800
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the appropriate microcode patch equivalent ID table.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  OrEquivalenceTablePtr    Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF15OrMicrocodeEquivalenceTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **OrEquivalenceTablePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 MsrDeCfg;
+
+  LibAmdMsrRead (MSR_DE_CFG, &MsrDeCfg, StdHeader);
+  if ((MsrDeCfg & 0x80000) == 0) {
+    *NumberOfElements = ((sizeof (CpuF15OrUnEncryptedMicrocodeEquivalenceTable) / sizeof (UINT16)) / 2);
+    *OrEquivalenceTablePtr = CpuF15OrUnEncryptedMicrocodeEquivalenceTable;
+  } else {
+    *NumberOfElements = ((sizeof (CpuF15OrMicrocodeEquivalenceTable) / sizeof (UINT16)) / 2);
+    *OrEquivalenceTablePtr = CpuF15OrMicrocodeEquivalenceTable;
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrHtPhyTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrHtPhyTables.c
new file mode 100644
index 0000000000..2129d59d07
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrHtPhyTables.c
@@ -0,0 +1,833 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi Ht Phy tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 53592 $   @e \$Date: 2011-05-23 00:27:15 -0600 (Mon, 23 May 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_REVD_HY_F15HYHTPHYTABLES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  HT   Phy   T a b l e s
+// -------------------------
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F15OrHtPhyRegisters[] =
+{
+//
+// All the entries for XmtRdPtr
+//
+// 0xCF
+// HT_PHY_HT1_FIFO_PTR_OPT_VALUE
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT1,               //
+      0xCF,                                 // Address
+      0x00000D4D,                           // regData
+      0x0000FFFF,                           // regMask
+    }}
+  },
+// 0xDF
+// HT_PHY_HT1_FIFO_PTR_OPT_VALUE
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT1,               //
+      0xDF,                                 // Address
+      0x00000D4D,                           // regData
+      0x0000FFFF,                           // regMask
+    }}
+  },
+// 0xCF
+// Default for HT3, unless overridden below.
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xCF,                                 // Address
+      0x00000A2A,                           // regData
+      0x0000FFFF,                           // regMask
+    }}
+  },
+// 0xDF
+// Default for HT3, unless overridden below.
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xDF,                                 // Address
+      0x00000A2A,                           // regData
+      0x0000FFFF,                           // regMask
+    }}
+  },
+// 0xC1
+// [29:22] LfcMax = 20h, [21:14] LfcMin = 10h
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC1,                                 // Address
+      0x08040000,                           // regData
+      0x3FFFC000,                           // regMask
+    }}
+  },
+// 0xD1
+// [29:22] LfcMax = 20h, [21:14] LfcMin = 10h
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD1,                                 // Address
+      0x08040000,                           // regData
+      0x3FFFC000,                           // regMask
+    }}
+  },
+// 0xC1
+// [29:22] LfcMax = 10h, [21:14] LfcMin = 08h
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT1,               //
+      0xC1,                                 // Address
+      0x04020000,                           // regData
+      0x3FFFC000,                           // regMask
+    }}
+  },
+// 0xD1
+// [29:22] LfcMax = 10h, [21:14] LfcMin = 08h
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT1,               //
+      0xD1,                                 // Address
+      0x04020000,                           // regData
+      0x3FFFC000,                           // regMask
+    }}
+  },
+// 0xC5
+// [7] TxLs23ClkGateEn = 1
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_ALL,               //
+      0xC5,                                 // Address
+      0x00000080,                           // regData
+      0x00000080,                           // regMask
+    }}
+  },
+// 0xD5
+// [7] TxLs23ClkGateEn = 1
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_ALL,               //
+      0xD5,                                 // Address
+      0x00000080,                           // regData
+      0x00000080,                           // regMask
+    }}
+  },
+
+//
+// Deemphasis Settings
+//
+// HT1: clear any warm reset deemphasis settings.
+
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT1,               //
+      0xC4,                                 // Address
+      0x00000000,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT1,               //
+      0xD4,                                 // Address
+      0x00000000,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_HT1,               //
+      0x720C,                                 // Address
+      0x00000000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_HT1,               //
+      0x730C,                                 // Address
+      0x00000000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+
+//deemphasis level        Post2[31, 24]    Post1[23, 16]    Pre1[15, 8]    Margin[7, 0]
+// No deemphasis               00h              00h             00h            00h
+// -3dB postcursor             00h              26h             00h            00h
+// -6dB postcursor             00h              40h             00h            00h
+// -8dB postcursor             00h              4Dh             00h            00h
+// -11dB postcursor            00h              5Ch             00h            00h
+//                             00h              4Dh             0Fh            00h
+// -11dB postcursor with -8dB precursor
+
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0x720C,                                 // Address
+      0x00000000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0x730C,                                 // Address
+      0x00000000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0x720C,                                 // Address
+      0x00260000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__3,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0x730C,                                 // Address
+      0x00260000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0x720C,                                 // Address
+      0x00400000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__6,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0x730C,                                 // Address
+      0x00400000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0x720C,                                 // Address
+      0x004D0000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0x730C,                                 // Address
+      0x004D0000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0x720C,                                 // Address
+      0x005C0000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0x730C,                                 // Address
+      0x005C0000,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0x720C,                                 // Address
+      0x004D0F00,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DEEMPHASIS_LEVEL__11_8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0x730C,                                 // Address
+      0x004D0F00,                           // regData
+      0xFFFFFFFF,                           // regMask
+    }}
+  },
+
+// Far-device deemphasis setting DCV[15:10]
+// No deemphasis                 4Dh
+// -2dB postcursor               3Dh
+// -3dB postcursor               36h
+// -5dB postcursor               2Bh
+// -6dB postcursor               27h
+// -7dB postcursor               22h
+// -8dB postcursor               1Fh
+// -9dB postcursor               1Bh
+// -11dB postcursor              16h
+
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00013400,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL_NONE,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00013400,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__2,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x0000F400,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__2,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x0000F400,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__3,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x0000D800,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__3,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x0000D800,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__5,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x0000AC00,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__5,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x0000AC00,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__6,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00009C00,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__6,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00009C00,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__7,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00008800,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__7,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00008800,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__8,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00007C00,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__8,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00007C00,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__9,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00006C00,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__9,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00006C00,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__11,
+      HTPHY_LINKTYPE_SL0_HT3,               //
+      0xC4,                                 // Address
+      0x00005800,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+  {
+    DeemphasisRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      DCV_LEVEL__11,
+      HTPHY_LINKTYPE_SL1_HT3,               //
+      0xD4,                                 // Address
+      0x00005800,                           // regData
+      0x0003FC00,                           // regMask
+    }}
+  },
+// 0x520A
+// [14:13] AnalogWaitTime = 10b
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL0_ALL,                   //
+      0x520A,                               // Address
+      0x00004000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+// 0x530A
+// [14:13] AnalogWaitTime = 10b
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_SL1_ALL,                   //
+      0x530A,                               // Address
+      0x00004000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+// 0xE3
+// [7] RoCalEn = 1b
+  {
+    HtPhyRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HTPHY_LINKTYPE_ALL,                   //
+      0xE3,                               // Address
+      0x00000080,                           // regData
+      0x00000080,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrHtPhyRegisterTable = {
+  PrimaryCores,
+  (sizeof (F15OrHtPhyRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F15OrHtPhyRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrInitEarlyTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrInitEarlyTable.c
new file mode 100644
index 0000000000..2f0f43e33a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrInitEarlyTable.c
@@ -0,0 +1,187 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize the Family 15h Orochi specific way of running early initialization.
+ *
+ * Returns the table of initialization steps to perform at
+ * AmdInitEarly.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "cpuEarlyInit.h"
+#include "OptionFamily15hEarlySample.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORINITEARLYTABLE_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+F15OrLoadMicrocodePatchAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+GetF15OrEarlyInitOnCoreTable (
+  IN       CPU_SPECIFIC_SERVICES                *FamilyServices,
+     OUT   CONST S_PERFORM_EARLY_INIT_ON_CORE   **Table,
+  IN       AMD_CPU_EARLY_PARAMS                 *EarlyParams,
+  IN       AMD_CONFIG_PARAMS                    *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern F_PERFORM_EARLY_INIT_ON_CORE McaInitializationAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE SetRegistersFromTablesAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE F15SetBrandIdRegistersAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE LocalApicInitializationAtEarly;
+extern F15_OR_ES_MCU_PATCH F15OrEarlySampleLoadMcuPatch;
+
+/*----------------------------------------------------------------------------------------
+ *                          D A T A    D E C L A R A T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+CONST S_PERFORM_EARLY_INIT_ON_CORE ROMDATA F15OrEarlyInitOnCoreTable[] =
+{
+  {McaInitializationAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {SetRegistersFromTablesAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {F15SetBrandIdRegistersAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {LocalApicInitializationAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {F15OrLoadMicrocodePatchAtEarly, PERFORM_EARLY_WARM_RESET},
+  {NULL, 0}
+};
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that may be invoked at AmdCpuEarly to return the steps that a
+ * processor that uses the standard initialization steps should take.
+ *
+ *  @CpuServiceMethod{::F_GET_EARLY_INIT_TABLE}.
+ *
+ * @param[in]       FamilyServices    The current Family Specific Services.
+ * @param[out]      Table             Table of appropriate init steps for the executing core.
+ * @param[in]       EarlyParams       Service Interface structure to initialize.
+ * @param[in]       StdHeader         Opaque handle to standard config header.
+ *
+ */
+VOID
+GetF15OrEarlyInitOnCoreTable (
+  IN       CPU_SPECIFIC_SERVICES                *FamilyServices,
+     OUT   CONST S_PERFORM_EARLY_INIT_ON_CORE   **Table,
+  IN       AMD_CPU_EARLY_PARAMS                 *EarlyParams,
+  IN       AMD_CONFIG_PARAMS                    *StdHeader
+  )
+{
+  *Table = F15OrEarlyInitOnCoreTable;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Update microcode patch in current processor for Family15h OR.
+ *
+ * This function acts as a wrapper for calling the LoadMicrocodePatch
+ * routine at AmdInitEarly.
+ *
+ * This particualr version implements a workaround to a potential problem caused
+ * when upgrading the microcode on Orochi B1 processors.
+ *
+ *  @param[in]   FamilyServices      The current Family Specific Services.
+ *  @param[in]   EarlyParams         Service parameters.
+ *  @param[in]   StdHeader           Config handle for library and services.
+ *
+ */
+VOID
+F15OrLoadMicrocodePatchAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT64         MsrValue;
+  UINT64         BuCfg2MsrValue;
+  UINT64         CuCfgMsrValue;
+  BOOLEAN        IsPatchLoaded;
+
+  AGESA_TESTPOINT (TpProcCpuLoadUcode, StdHeader);
+
+  if (IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, StdHeader)) {
+
+    F15OrEarlySampleLoadMcuPatch.F15OrESAvoidNbCyclesStart (StdHeader, &BuCfg2MsrValue);
+
+    // Erratum #655
+    // Set MSR C001_1023[1] = 1b, prior to writing to MSR C001_1020
+    LibAmdMsrRead (MSR_CU_CFG, &CuCfgMsrValue, StdHeader);
+    MsrValue = CuCfgMsrValue | BIT1;
+    LibAmdMsrWrite (MSR_CU_CFG, &MsrValue, StdHeader);
+
+    IsPatchLoaded =  F15OrEarlySampleLoadMcuPatch.F15OrUpdateMcuPatchHook (StdHeader);
+
+    // Erratum #655
+    // Restore MSR C001_1023[1] = previous setting
+    LibAmdMsrWrite (MSR_CU_CFG, &CuCfgMsrValue, StdHeader);
+
+    F15OrEarlySampleLoadMcuPatch.F15OrESAvoidNbCyclesEnd (StdHeader, &BuCfg2MsrValue);
+    F15OrEarlySampleLoadMcuPatch.F15OrESAfterPatchLoaded (StdHeader, IsPatchLoaded);
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrIoCstate.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrIoCstate.c
new file mode 100644
index 0000000000..6c94521624
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrIoCstate.c
@@ -0,0 +1,377 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi IO C-state feature support functions.
+ *
+ * Provides the functions necessary to initialize the IO C-state feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFeatures.h"
+#include "cpuIoCstate.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "CommonReturns.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORIOCSTATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F15OrInitializeIoCstateOnCore (
+  IN       VOID *CstateBaseMsr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+F15OrIsCsdObjGenerated (
+  IN       IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE            IoCstateFamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION    OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable IO Cstate on a family 15h Orochi CPU.
+ *  Implement BIOS Requirements for Initialization of C-states
+ *
+ * @param[in]    IoCstateServices   Pointer to this CPU's IO Cstate family services.
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F15OrInitializeIoCstate (
+  IN       IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+  IN       UINT64                    EntryPoint,
+  IN       PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  UINT32   LocalPciRegister;
+  UINT32   PciMask;
+  UINT64   LocalMsrRegister;
+  AP_TASK  TaskPtr;
+  PCI_ADDR PciAddress;
+
+  if ((EntryPoint & CPU_FEAT_AFTER_PM_INIT) != 0) {
+    // Initialize MSRC001_0073[CstateAddr] on each core to a region of
+    // the IO address map with 8 consecutive available addresses.
+    LocalMsrRegister = 0;
+
+    ((CSTATE_ADDRESS_MSR *) &LocalMsrRegister)->CstateAddr = PlatformConfig->CStateIoBaseAddress;
+
+    TaskPtr.FuncAddress.PfApTaskI = F15OrInitializeIoCstateOnCore;
+    TaskPtr.DataTransfer.DataSizeInDwords = 2;
+    TaskPtr.DataTransfer.DataPtr = &LocalMsrRegister;
+    TaskPtr.DataTransfer.DataTransferFlags = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, NULL);
+
+    // Initialize F4x128
+    // bits[0]   CoreCstateMode = 0
+    // bits[1]   CoreCstatePolicy = 0
+    // bits[4:2] HaltCstateIndex = 0
+    PciAddress.Address.Function = FUNC_4;
+    PciAddress.Address.Register = CSTATE_POLICY_CTRL1_REG;
+    LocalPciRegister = 0x00000000;
+    PciMask = 0xFFFFFFE0;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, PciMask, LocalPciRegister, StdHeader);
+  }
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable CState on a family 15h Orochi core.
+ *
+ * @param[in]    CstateBaseMsr      MSR value to write to C001_0073 as determined by core 0.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F15OrInitializeIoCstateOnCore (
+  IN       VOID *CstateBaseMsr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  // Initialize MSRC001_0073[CstateAddr] on each core
+  LibAmdMsrWrite (MSR_CSTATE_ADDRESS, (UINT64 *) CstateBaseMsr, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the size of CST object
+ *
+ * @param[in]    IoCstateServices   IO Cstate services.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       CstObjSize         Size of CST Object
+ *
+ */
+UINT32
+STATIC
+F15OrGetAcpiCstObj (
+  IN       IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+  IN       PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  BOOLEAN                   GenerateCsdObj;
+  UINT32                    CStateAcpiObjSize;
+  IO_CSTATE_FAMILY_SERVICES *FamilyServices;
+  ACPI_CST_GET_INPUT CstGetInput;
+
+  CstGetInput.IoCstateServices = IoCstateServices;
+  CstGetInput.PlatformConfig = PlatformConfig;
+  CstGetInput.CStateAcpiObjSizePtr = &CStateAcpiObjSize;
+
+  IDS_SKIP_HOOK (IDS_CST_SIZE, &CstGetInput, StdHeader) {
+    CStateAcpiObjSize = CST_HEADER_SIZE + CST_BODY_SIZE;
+
+    // If CSD Object is generated, add the size of CSD Object to the total size of
+    // CState ACPI Object size
+    GetFeatureServicesOfCurrentCore (&IoCstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+    ASSERT (FamilyServices != NULL);
+    GenerateCsdObj = FamilyServices->IsCsdObjGenerated (FamilyServices, StdHeader);
+
+    if (GenerateCsdObj) {
+      CStateAcpiObjSize += CSD_HEADER_SIZE + CSD_BODY_SIZE;
+    }
+  }
+  return CStateAcpiObjSize;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Routine to generate the C-State ACPI objects
+ *
+ * @param[in]      IoCstateServices       IO Cstate services.
+ * @param[in]      LocalApicId            Local Apic Id for each core.
+ * @param[in, out] **PstateAcpiBufferPtr  Pointer to the Acpi Buffer Pointer.
+ * @param[in]      StdHeader              Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F15OrCreateAcpiCstObj (
+  IN       IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+  IN       UINT8                     LocalApicId,
+  IN OUT   VOID                      **PstateAcpiBufferPtr,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  UINT64                MsrData;
+  BOOLEAN               GenerateCsdObj;
+  CST_HEADER_STRUCT     *CstHeaderPtr;
+  CST_BODY_STRUCT       *CstBodyPtr;
+  CSD_HEADER_STRUCT     *CsdHeaderPtr;
+  CSD_BODY_STRUCT       *CsdBodyPtr;
+  IO_CSTATE_FAMILY_SERVICES    *FamilyServices;
+  ACPI_CST_CREATE_INPUT  CstInput;
+
+  CstInput.IoCstateServices = IoCstateServices;
+  CstInput.LocalApicId = LocalApicId;
+  CstInput.PstateAcpiBufferPtr = PstateAcpiBufferPtr;
+
+  IDS_SKIP_HOOK (IDS_CST_CREATE, &CstInput, StdHeader) {
+    // Read from MSR C0010073 to obtain CstateAddr
+    LibAmdMsrRead (MSR_CSTATE_ADDRESS, &MsrData, StdHeader);
+
+    // Typecast the pointer
+    CstHeaderPtr = (CST_HEADER_STRUCT *) *PstateAcpiBufferPtr;
+
+    // Set CST Header
+    CstHeaderPtr->NameOpcode  = NAME_OPCODE;
+    CstHeaderPtr->CstName_a__ = CST_NAME__;
+    CstHeaderPtr->CstName_a_C = CST_NAME_C;
+    CstHeaderPtr->CstName_a_S = CST_NAME_S;
+    CstHeaderPtr->CstName_a_T = CST_NAME_T;
+
+    // Typecast the pointer
+    CstHeaderPtr++;
+    CstBodyPtr = (CST_BODY_STRUCT *) CstHeaderPtr;
+
+    // Set CST Body
+    CstBodyPtr->PkgOpcode      = PACKAGE_OPCODE;
+    CstBodyPtr->PkgLength      = CST_LENGTH;
+    CstBodyPtr->PkgElements    = CST_NUM_OF_ELEMENTS;
+    CstBodyPtr->BytePrefix     = BYTE_PREFIX_OPCODE;
+    CstBodyPtr->Count          = CST_COUNT;
+    CstBodyPtr->PkgOpcode2     = PACKAGE_OPCODE;
+    CstBodyPtr->PkgLength2     = CST_PKG_LENGTH;
+    CstBodyPtr->PkgElements2   = CST_PKG_ELEMENTS;
+    CstBodyPtr->BufferOpcode   = BUFFER_OPCODE;
+    CstBodyPtr->BufferLength   = CST_SUBPKG_LENGTH;
+    CstBodyPtr->BufferElements = CST_SUBPKG_ELEMENTS;
+    CstBodyPtr->BufferOpcode2  = BUFFER_OPCODE;
+    CstBodyPtr->GdrOpcode      = GENERIC_REG_DESCRIPTION;
+    CstBodyPtr->GdrLength      = CST_GDR_LENGTH;
+    CstBodyPtr->AddrSpaceId    = GDR_ASI_SYSTEM_IO;
+    CstBodyPtr->RegBitWidth    = 0x08;
+    CstBodyPtr->RegBitOffset   = 0x00;
+    CstBodyPtr->AddressSize    = GDR_ASZ_BYTE_ACCESS;
+    CstBodyPtr->RegisterAddr   = ((CSTATE_ADDRESS_MSR *) &MsrData)->CstateAddr + 1;
+    CstBodyPtr->EndTag         = 0x0079;
+    CstBodyPtr->BytePrefix2    = BYTE_PREFIX_OPCODE;
+    CstBodyPtr->Type           = CST_C2_TYPE;
+    CstBodyPtr->WordPrefix     = WORD_PREFIX_OPCODE;
+    CstBodyPtr->Latency        = 100;
+    CstBodyPtr->DWordPrefix    = DWORD_PREFIX_OPCODE;
+    CstBodyPtr->Power          = 0;
+
+    CstBodyPtr++;
+    //Update the pointer
+    *PstateAcpiBufferPtr = CstBodyPtr;
+
+
+  // Check whether CSD object should be generated
+    GetFeatureServicesOfCurrentCore (&IoCstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+    ASSERT (FamilyServices != NULL);
+    GenerateCsdObj = FamilyServices->IsCsdObjGenerated (FamilyServices, StdHeader);
+
+    if (GenerateCsdObj) {
+      CsdHeaderPtr = (CSD_HEADER_STRUCT *) *PstateAcpiBufferPtr;
+
+      // Set CSD Header
+      CsdHeaderPtr->NameOpcode  = NAME_OPCODE;
+      CsdHeaderPtr->CsdName_a__ = CST_NAME__;
+      CsdHeaderPtr->CsdName_a_C = CST_NAME_C;
+      CsdHeaderPtr->CsdName_a_S = CST_NAME_S;
+      CsdHeaderPtr->CsdName_a_D = CSD_NAME_D;
+
+      CsdHeaderPtr++;
+      CsdBodyPtr = (CSD_BODY_STRUCT *) CsdHeaderPtr;
+
+      // Set CSD Body
+      CsdBodyPtr->PkgOpcode         = PACKAGE_OPCODE;
+      CsdBodyPtr->PkgLength         = CSD_BODY_SIZE - 1;
+      CsdBodyPtr->PkgElements       = 1;
+      CsdBodyPtr->PkgOpcode2        = PACKAGE_OPCODE;
+      CsdBodyPtr->PkgLength2        = CSD_BODY_SIZE - 4; // CSD_BODY_SIZE - Package() - Package Opcode
+      CsdBodyPtr->PkgElements2      = 6;
+      CsdBodyPtr->BytePrefix        = BYTE_PREFIX_OPCODE;
+      CsdBodyPtr->NumEntries        = 6;
+      CsdBodyPtr->BytePrefix2       = BYTE_PREFIX_OPCODE;
+      CsdBodyPtr->Revision          = 0;
+      CsdBodyPtr->DWordPrefix       = DWORD_PREFIX_OPCODE;
+      CsdBodyPtr->Domain            = (LocalApicId & 0xFE) >> 1;
+      CsdBodyPtr->DWordPrefix2      = DWORD_PREFIX_OPCODE;
+      CsdBodyPtr->CoordType         = CSD_COORD_TYPE_HW_ALL;
+      CsdBodyPtr->DWordPrefix3      = DWORD_PREFIX_OPCODE;
+      CsdBodyPtr->NumProcessors     = 0x2;
+      CsdBodyPtr->DWordPrefix4      = DWORD_PREFIX_OPCODE;
+      CsdBodyPtr->Index             = 0x0;
+
+      CsdBodyPtr++;
+
+      // Update the pointer
+      *PstateAcpiBufferPtr = CsdBodyPtr;
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Routine to check whether CSD object should be created.
+ *
+ * @param[in]      IoCstateServices      IO Cstate services.
+ * @param[in]      StdHeader             Config Handle for library, services.
+ *
+ * @retval         TRUE                  CSD Object should be created.
+ * @retval         FALSE                 CSD Object should not be created.
+ *
+ */
+BOOLEAN
+F15OrIsCsdObjGenerated (
+  IN       IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  // CSD Object should only be created when there are two cores per compute unit
+  if (GetComputeUnitMapping (StdHeader) == EvenCoresMapping) {
+    return TRUE;
+  }
+  return FALSE;
+}
+
+CONST IO_CSTATE_FAMILY_SERVICES ROMDATA F15OrIoCstateSupport =
+{
+  0,
+  (PF_IO_CSTATE_IS_SUPPORTED) CommonReturnTrue,
+  F15OrInitializeIoCstate,
+  F15OrGetAcpiCstObj,
+  F15OrCreateAcpiCstObj,
+  F15OrIsCsdObjGenerated
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrL3Features.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrL3Features.c
new file mode 100644
index 0000000000..1c3b0bd100
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrL3Features.c
@@ -0,0 +1,549 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi L3 dependent feature support functions.
+ *
+ * Provides the functions necessary to initialize L3 dependent features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 60552 $   @e \$Date: 2011-10-17 18:50:55 -0600 (Mon, 17 Oct 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "CommonReturns.h"
+#include "cpuRegisters.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "cpuLateInit.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuL3Features.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORL3FEATURES_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define L3Cache8_0M 0xCCCC
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * The family 15h background scrubber context structure.
+ *
+ * These fields need to be saved, modified, then restored
+ * per die as part of HT Assist initialization.
+ */
+typedef struct {
+  UINT32  DramScrub:5;               ///< DRAM scrub rate
+  UINT32  :3;                        ///< Reserved
+  UINT32  L3Scrub:5;                 ///< L3 scrub rate
+  UINT32  :3;                        ///< Reserved
+  UINT32  Redirect:1;                ///< DRAM scrubber redirect enable
+  UINT32  :15;                       ///< Reserved
+} F15_SCRUB_CONTEXT;
+
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+F15OrIsNonOptimalConfig (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Check to see if the input CPU supports L3 dependent features.
+ *
+ * @param[in]    L3FeatureServices   L3 feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ * @param[in]    PlatformConfig      Contains the runtime modifiable feature input data.
+ *
+ * @retval       TRUE                L3 dependent features are supported.
+ * @retval       FALSE               L3 dependent features are not supported.
+ *
+ */
+BOOLEAN
+STATIC
+F15OrIsL3FeatureSupported (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig
+  )
+{
+  UINT32       Module;
+  UINT32       LocalPciRegister;
+  BOOLEAN      IsSupported;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredStatus;
+
+  IsSupported = FALSE;
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = NB_CAPS_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      if (((NB_CAPS_REGISTER *) &LocalPciRegister)->L3Capable == 1) {
+        IsSupported = TRUE;
+      }
+      break;
+    }
+  }
+  return IsSupported;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable the Probe filter feature
+ *
+ * @param[in]    L3FeatureServices   L3 family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F15OrHtAssistInit (
+  IN       L3_FEATURE_FAMILY_SERVICES  *L3FeatureServices,
+  IN       UINT32  Socket,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                     Module;
+  UINT32                     L3CacheParamRegister;
+  UINT32                     PfCtrlRegister;
+  PCI_ADDR                   PciAddress;
+  AGESA_STATUS               IgnoredStatus;
+
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = L3_CACHE_PARAM_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &L3CacheParamRegister, StdHeader);
+      ((L3_CACHE_PARAM_REGISTER *) &L3CacheParamRegister)->L3TagInit = 1;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &L3CacheParamRegister, StdHeader);
+      do {
+        LibAmdPciRead (AccessWidth32, PciAddress, &L3CacheParamRegister, StdHeader);
+      } while (((L3_CACHE_PARAM_REGISTER *) &L3CacheParamRegister)->L3TagInit != 0);
+
+      PciAddress.Address.Register = PROBE_FILTER_CTRL_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &PfCtrlRegister, StdHeader);
+      ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFWayHashEn = 1;
+      ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFLoIndexHashEn = 1;
+      ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFWayNum = 2;
+      ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFSubCacheEn = 0xF;
+      if ((L3CacheParamRegister & 0xFFFF) == L3Cache8_0M) {
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFSubCacheSize0 = 1;
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFSubCacheSize1 = 1;
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFSubCacheSize2 = 1;
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFSubCacheSize3 = 1;
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFMode = 3;
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFPreferredSORepl = 2;
+      } else {
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFSubCacheSize0 = 0;
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFSubCacheSize1 = 0;
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFSubCacheSize2 = 0;
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFSubCacheSize3 = 0;
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFMode = 2;
+        ((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFPreferredSORepl = 0;
+      }
+      LibAmdPciWrite (AccessWidth32, PciAddress, &PfCtrlRegister, StdHeader);
+
+      do {
+        LibAmdPciRead (AccessWidth32, PciAddress, &PfCtrlRegister, StdHeader);
+      } while (((PROBE_FILTER_CTRL_REGISTER *) &PfCtrlRegister)->PFInitDone != 1);
+      IDS_OPTION_HOOK (IDS_HT_ASSIST, &PciAddress, StdHeader);
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable the ATM Mode feature.
+ *
+ * @param[in]    L3FeatureServices    L3 feature family services.
+ * @param[in]    Socket               Processor socket to check.
+ * @param[in]    StdHeader            Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F15OrAtmModeInit (
+  IN       L3_FEATURE_FAMILY_SERVICES  *L3FeatureServices,
+  IN       UINT32  Socket,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                     Module;
+  UINT32                     LocalPciRegister;
+  PCI_ADDR                   PciAddress;
+  AGESA_STATUS               IgnoredStatus;
+
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+      PciAddress.Address.Function = FUNC_0;
+      PciAddress.Address.Register = LTC_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((LTC_REGISTER *) &LocalPciRegister)->ATMModeEn = 1;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = L3_CONTROL_1_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((L3_CONTROL_1_REGISTER *) &LocalPciRegister)->L3ATMModeEn = 1;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Save the current settings of the scrubbers, and disabled them.
+ *
+ * @param[in]    L3FeatureServices   L3 feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    ScrubSettings       Location to store current L3 scrubber settings.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F15OrGetL3ScrubCtrl (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       UINT32 ScrubSettings[L3_SCRUBBER_CONTEXT_ARRAY_SIZE],
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32       Module;
+  UINT32       ScrubCtrl;
+  UINT32       ScrubAddr;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredStatus;
+
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+
+      ASSERT (Module < L3_SCRUBBER_CONTEXT_ARRAY_SIZE);
+
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = DRAM_SCRUB_ADDR_LOW_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &ScrubAddr, StdHeader);
+
+      PciAddress.Address.Register = SCRUB_RATE_CTRL_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &ScrubCtrl, StdHeader);
+
+      ((F15_SCRUB_CONTEXT *) &ScrubSettings[Module])->DramScrub =
+        ((SCRUB_RATE_CTRL_REGISTER *) &ScrubCtrl)->DramScrub;
+      ((F15_SCRUB_CONTEXT *) &ScrubSettings[Module])->L3Scrub =
+        ((SCRUB_RATE_CTRL_REGISTER *) &ScrubCtrl)->L3Scrub;
+      ((F15_SCRUB_CONTEXT *) &ScrubSettings[Module])->Redirect =
+        ((DRAM_SCRUB_ADDR_LOW_REGISTER *) &ScrubAddr)->ScrubReDirEn;
+
+      ((SCRUB_RATE_CTRL_REGISTER *) &ScrubCtrl)->DramScrub = 0;
+      ((SCRUB_RATE_CTRL_REGISTER *) &ScrubCtrl)->L3Scrub = 0;
+      ((DRAM_SCRUB_ADDR_LOW_REGISTER *) &ScrubAddr)->ScrubReDirEn = 0;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &ScrubCtrl, StdHeader);
+      PciAddress.Address.Register = DRAM_SCRUB_ADDR_LOW_REG;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &ScrubAddr, StdHeader);
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Restore the initial settings for the scrubbers.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    ScrubSettings       Location to store current L3 scrubber settings.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F15OrSetL3ScrubCtrl (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       UINT32 ScrubSettings[L3_SCRUBBER_CONTEXT_ARRAY_SIZE],
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32       Module;
+  UINT32       LocalPciRegister;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredStatus;
+
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+
+      ASSERT (Module < L3_SCRUBBER_CONTEXT_ARRAY_SIZE);
+
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = SCRUB_RATE_CTRL_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((SCRUB_RATE_CTRL_REGISTER *) &LocalPciRegister)->DramScrub =
+        ((F15_SCRUB_CONTEXT *) &ScrubSettings[Module])->DramScrub;
+      ((SCRUB_RATE_CTRL_REGISTER *) &LocalPciRegister)->L3Scrub =
+        ((F15_SCRUB_CONTEXT *) &ScrubSettings[Module])->L3Scrub;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+      PciAddress.Address.Register = DRAM_SCRUB_ADDR_LOW_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((DRAM_SCRUB_ADDR_LOW_REGISTER *) &LocalPciRegister)->ScrubReDirEn =
+        ((F15_SCRUB_CONTEXT *) &ScrubSettings[Module])->Redirect;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Set MSR bits required for L3 feature support on each core.
+ *
+ * @param[in]    L3FeatureServices    L3 Feature family services.
+ * @param[in]    HtAssistEnabled      Indicates whether Ht Assist is enabled.
+ * @param[in]    StdHeader            Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F15OrHookDisableCache (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       BOOLEAN HtAssistEnabled,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64  LocalMsrRegister;
+
+  // This bit is set only if Probe Filter is enabled.
+  if (HtAssistEnabled) {
+    LibAmdMsrRead (MSR_BU_CFG2, &LocalMsrRegister, StdHeader);
+    LocalMsrRegister |= BIT42;
+    LibAmdMsrWrite (MSR_BU_CFG2, &LocalMsrRegister, StdHeader);
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Check to see if the input CPU is running in the optimal configuration.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @retval       TRUE               HT Assist is running sub-optimally.
+ * @retval       FALSE              HT Assist is running optimally.
+ *
+ */
+BOOLEAN
+F15OrIsNonOptimalConfig (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN      IsNonOptimal;
+  BOOLEAN      IsMemoryPresent;
+  UINT32       Module;
+  UINT32       LocalPciRegister;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredStatus;
+
+  IsNonOptimal = FALSE;
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus)) {
+      IsMemoryPresent = FALSE;
+      PciAddress.Address.Function = FUNC_2;
+      PciAddress.Address.Register = DRAM_CFG_HI_REG0;
+
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      if (((DRAM_CFG_HI_REGISTER *) &LocalPciRegister)->MemClkFreqVal == 1) {
+        IsMemoryPresent = TRUE;
+        if (((DRAM_CFG_HI_REGISTER *) &LocalPciRegister)->MemClkFreq < 0x0a) {
+          IsNonOptimal = TRUE;
+          break;
+        }
+      }
+
+      PciAddress.Address.Register = DRAM_CFG_HI_REG1;
+
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      if (((DRAM_CFG_HI_REGISTER *) &LocalPciRegister)->MemClkFreqVal == 1) {
+        IsMemoryPresent = TRUE;
+        if (((DRAM_CFG_HI_REGISTER *) &LocalPciRegister)->MemClkFreq < 0x0a) {
+          IsNonOptimal = TRUE;
+          break;
+        }
+      }
+      if (!IsMemoryPresent) {
+        IsNonOptimal = TRUE;
+        break;
+      }
+    }
+  }
+  return IsNonOptimal;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Check to see if the input CPU supports HT Assist.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    PlatformConfig      Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @retval       TRUE               HT Assist is supported.
+ * @retval       FALSE              HT Assist cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+F15OrIsHtAssistSupported (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN          IsSupported;
+  UINT32           CpuCount;
+  AP_MAILBOXES     ApMailboxes;
+
+  IsSupported = FALSE;
+
+  if (PlatformConfig->PlatformProfile.UseHtAssist) {
+    CpuCount = GetNumberOfProcessors (StdHeader);
+    ASSERT (CpuCount != 0);
+
+    if (CpuCount == 1) {
+      GetApMailbox (&ApMailboxes.ApMailInfo.Info, StdHeader);
+      if (ApMailboxes.ApMailInfo.Fields.ModuleType != 0) {
+        IsSupported = TRUE;
+      }
+    } else if (CpuCount > 1) {
+      IsSupported = TRUE;
+    }
+  }
+  return IsSupported;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Check to see if the input CPU supports ATM Mode.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    PlatformConfig      Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @retval       TRUE                ATM Mode is supported.
+ * @retval       FALSE               ATM Mode cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+F15OrIsAtmModeSupported (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN IsSupported;
+
+  IsSupported = TRUE;
+
+  if (!PlatformConfig->PlatformProfile.UseAtmMode) {
+    IsSupported = FALSE;
+  }
+  return IsSupported;
+}
+
+CONST L3_FEATURE_FAMILY_SERVICES ROMDATA F15OrL3Features =
+{
+  0,
+  F15OrIsL3FeatureSupported,
+  F15OrGetL3ScrubCtrl,
+  F15OrSetL3ScrubCtrl,
+  (PF_L3_FEATURE_BEFORE_INIT) CommonVoid,
+  (PF_L3_FEATURE_AFTER_INIT) CommonVoid,
+  F15OrHookDisableCache,
+  (PF_L3_FEATURE_ENABLE_CACHE) CommonVoid,
+  F15OrIsHtAssistSupported,
+  F15OrHtAssistInit,
+  F15OrIsNonOptimalConfig,
+  F15OrIsAtmModeSupported,
+  F15OrAtmModeInit,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrLogicalIdTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrLogicalIdTables.c
new file mode 100644
index 0000000000..158cd8011d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrLogicalIdTables.c
@@ -0,0 +1,120 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi Logical ID Table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORLOGICALIDTABLES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF15OrLogicalIdAndRev (
+     OUT   CONST CPU_LOGICAL_ID_XLAT **OrIdPtr,
+     OUT   UINT8 *NumberOfElements,
+     OUT   UINT64 *LogicalFamily,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+STATIC CONST CPU_LOGICAL_ID_XLAT ROMDATA CpuF15OrLogicalIdAndRevArray[] =
+{
+  {
+    0x6012,
+    AMD_F15_OR_B2
+  },
+  {
+    0x6011,
+    AMD_F15_OR_B1
+  },
+  {
+    0x6010,
+    AMD_F15_OR_B0
+  },
+  {
+    0x6001,
+    AMD_F15_OR_A1
+  },
+  {
+    0x6000,
+    AMD_F15_OR_A0
+  }
+};
+
+VOID
+GetF15OrLogicalIdAndRev (
+     OUT   CONST CPU_LOGICAL_ID_XLAT **OrIdPtr,
+     OUT   UINT8 *NumberOfElements,
+     OUT   UINT64 *LogicalFamily,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = (sizeof (CpuF15OrLogicalIdAndRevArray) / sizeof (CPU_LOGICAL_ID_XLAT));
+  *OrIdPtr = CpuF15OrLogicalIdAndRevArray;
+  *LogicalFamily = AMD_FAMILY_15_OR;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrLowPwrPstate.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrLowPwrPstate.c
new file mode 100644
index 0000000000..c2d8bb9a59
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrLowPwrPstate.c
@@ -0,0 +1,234 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi Low Power P-state Initialization
+ *
+ * Enables Low Power P-state.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 54780 $   @e \$Date: 2011-06-12 21:25:20 -0600 (Sun, 12 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "CommonReturns.h"
+#include "cpuLowPwrPstate.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORLOWPWRPSTATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This routine will be run by every cores for enabling low power Pstate.
+ *
+ * This function must be run after P-states initialization and before creating ACPI objects
+ *
+ * @param[in]  LowPwrPstateServices    The current CPU's family services.
+ * @param[in]  PlatformConfig          Contains the runtime modifiable feature input data.
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ * @retval     AGESA_SUCCESS           Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F15OrInitializeLowPwrPstate (
+  IN       LOW_PWR_PSTATE_FAMILY_SERVICES  *LowPwrPstateServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT8  OriginalPstate;
+  UINT8  PstateMaxVal;
+  UINT8  CurPstateLimit;
+  UINT8  PstateToWaitFor;
+  UINT32 Socket;
+  UINT32 Module;
+  UINT32 Core;
+  UINT32 PciData;
+  UINT64 LocalMsrRegister;
+  CPU_SPECIFIC_SERVICES   *FamilySpecificServices;
+  PCI_ADDR PciAddress;
+  PCI_ADDR IntNode0PciAddress;
+  AGESA_STATUS IgnoredSts;
+
+  if (IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, StdHeader)) {
+    FamilySpecificServices = NULL;
+    OriginalPstate = 0;
+    GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+    ASSERT (FamilySpecificServices != NULL);
+
+    IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+    GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+
+    // Step 1 --- Read MSR_C001_0063[CurPstate] and store the value in OriginalPstate
+    LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+    OriginalPstate = (UINT8) ((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate;
+
+    // Step 2 --- Write 0 to MSR_C001_0062[PstateCmd]
+    LibAmdMsrRead (MSR_PSTATE_CTL, &LocalMsrRegister, StdHeader);
+    ((PSTATE_CTRL_MSR *) &LocalMsrRegister)->PstateCmd = (UINT64) 0;
+    LibAmdMsrWrite (MSR_PSTATE_CTL, &LocalMsrRegister, StdHeader);
+
+    // Step 3 --- Wait for MSR_C001_0063[CurPstate] == MSR_C001_0061[CurPstateLimit]
+    LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &LocalMsrRegister, StdHeader);
+    CurPstateLimit = (UINT8) ((PSTATE_CURLIM_MSR *) &LocalMsrRegister)->CurPstateLimit;
+    do {
+      LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+    } while (((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate != (UINT64) CurPstateLimit);
+
+    // Step 4 --- Copy MSR_C001_00[6B:64] pointed to by F3xDC[PstateMaxVal] to MSR_C001_00[6B:64]
+    //            pointed to by F3xDC[PstateMaxVal]+1
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = CPTC2_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+    PstateMaxVal = (UINT8) ((CLK_PWR_TIMING_CTRL2_REGISTER *) &PciData)->PstateMaxVal;
+    // In case that F3xDC[PstateMaxVal] was increased by step 5 during the first time of running this function.
+    // Get the real PstateMaxVal by checking C001_00[6B:64][PsEnable]
+    while (PstateMaxVal != 0) {
+      LibAmdMsrRead ((PS_REG_BASE + PstateMaxVal), &LocalMsrRegister, StdHeader);
+      if (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1) {
+        break;
+      }
+      PstateMaxVal--;
+    }
+
+    LibAmdMsrRead ((PS_REG_BASE + PstateMaxVal), &LocalMsrRegister, StdHeader);
+    LibAmdMsrWrite ((PS_REG_BASE + PstateMaxVal + 1), &LocalMsrRegister, StdHeader);
+
+    // Step 5 --- Increment the value in F3xDC[PstateMaxVal] by 1
+    PstateMaxVal++;
+    if (Core == 0) {
+      ((CLK_PWR_TIMING_CTRL2_REGISTER *) &PciData)->PstateMaxVal = PstateMaxVal;
+      OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, 0, PciData, StdHeader);
+    }
+
+    // Step 6 --- Write 100b to CpuFid from MSR_C001_00[6B:64] indexed by F3xDC[PstateMaxVal]
+    // Step 7 --- Write 10b to CpuDid from MSR_C001_00[6B:64] indexed by F3xDC[PstateMaxVal]
+    // Step 8 --- Write 0b to PstateEn from MSR_C001_00[6B:64] indexed by F3xDC[PstateMaxVal]
+    LibAmdMsrRead ((PS_REG_BASE + PstateMaxVal), &LocalMsrRegister, StdHeader);
+    ((PSTATE_MSR *) &LocalMsrRegister)->CpuFid = 4;
+    ((PSTATE_MSR *) &LocalMsrRegister)->CpuDid = 2;
+    ((PSTATE_MSR *) &LocalMsrRegister)->PsEnable = 0;
+    LibAmdMsrWrite ((PS_REG_BASE + PstateMaxVal), &LocalMsrRegister, StdHeader);
+
+    // Step 9 --- If F3x64[HtcTmpLmt] == 0, write 7Fh to F3x64[HtcTmpLmt]
+    // Step 10 --- Write 1b to F3x64[HtcEn]
+    GetPciAddress (StdHeader, Socket, 0, &IntNode0PciAddress, &IgnoredSts);
+    if (Core == 0) {
+      IntNode0PciAddress.Address.Function = FUNC_3;
+      IntNode0PciAddress.Address.Register = HTC_REG;
+      LibAmdPciRead (AccessWidth32, IntNode0PciAddress, &PciData, StdHeader);
+      if (((HTC_REGISTER *) &PciData)->HtcTmpLmt == 0) {
+        ((HTC_REGISTER *) &PciData)->HtcTmpLmt = 0x7F;
+      }
+      ((HTC_REGISTER *) &PciData)->HtcEn = 1;
+      IDS_OPTION_HOOK (IDS_HTC_CTRL, &PciData, StdHeader);
+      LibAmdPciWrite (AccessWidth32, IntNode0PciAddress, &PciData, StdHeader);
+    }
+
+    // Step 11 --- Write OriginalPstate to MSR_C001_0062[PstateCmd]
+    LibAmdMsrRead (MSR_PSTATE_CTL, &LocalMsrRegister, StdHeader);
+    ((PSTATE_CTRL_MSR *) &LocalMsrRegister)->PstateCmd = (UINT64) OriginalPstate;
+    LibAmdMsrWrite (MSR_PSTATE_CTL, &LocalMsrRegister, StdHeader);
+
+    // Step 12 --- If (MSR_C001_0061[CurPstateLimit] > OriginalPstate)
+    //                 Wait for (MSR_C001_0063[CurPstate] == MSR_C001_0061[CurPstateLimit])
+    //             Else
+    //                 Wait for (MSR_C001_0063[CurPstate] == OriginalPstate
+    LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &LocalMsrRegister, StdHeader);
+    CurPstateLimit = (UINT8) ((PSTATE_CURLIM_MSR *) &LocalMsrRegister)->CurPstateLimit;
+    PstateToWaitFor = (CurPstateLimit > OriginalPstate) ? CurPstateLimit : OriginalPstate;
+    do {
+      LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+    } while (((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate != (UINT64) PstateToWaitFor);
+
+    // Step 13 --- Write F3x64[HtcPstateLimit] and F3xA8[PopDownPstate] with the value from
+    //             F3xDC[PstateMaxVal] and exit the sequence
+    if (Core == 0) {
+      ((HTC_REGISTER *) &PciData)->HtcPstateLimit = PstateMaxVal;
+      LibAmdPciWrite (AccessWidth32, IntNode0PciAddress, &PciData, StdHeader);
+      PciAddress.Address.Register = POPUP_PSTATE_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+      ((POPUP_PSTATE_REGISTER *) &PciData)->PopDownPstate = PstateMaxVal;
+      OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, 0, PciData, StdHeader);
+    }
+  }
+  return AGESA_SUCCESS;
+}
+
+
+CONST LOW_PWR_PSTATE_FAMILY_SERVICES ROMDATA F15OrLowPwrPstateSupport =
+{
+  0,
+  (PF_LOW_PWR_PSTATE_IS_SUPPORTED) CommonReturnTrue,
+  F15OrInitializeLowPwrPstate
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch06000425.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch06000425.c
new file mode 100644
index 0000000000..df9c27b92a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch06000425.c
@@ -0,0 +1,2674 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD F15Or Microcode patch.
+ *
+ * F15Or Microcode Patch rev 06000425 for 6010 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x15/Or
+ * @e \$Revision: 53746 $   @e \$Date: 2011-05-24 23:08:53 -0600 (Tue, 24 May 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+UCODE_VS_FLAG (06000425)
+
+// Encrypted Patch code 06000425 for 6010 and equivalent
+CONST UINT8 ROMDATA CpuF15OrMicrocodePatch06000425 [IDS_PAD_4K] =
+{
+  0x11,
+  0x20,
+  0x08,
+  0x04,
+  0x25,
+  0x04,
+  0x00,
+  0x06,
+  0x02,
+  0x80,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x10,
+  0x60,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x55,
+  0xbf,
+  0xbd,
+  0x55,
+  0xea,
+  0x96,
+  0xd6,
+  0xed,
+  0x1a,
+  0x82,
+  0xda,
+  0x4a,
+  0xdc,
+  0xc0,
+  0x8a,
+  0x21,
+  0x02,
+  0x4c,
+  0x0f,
+  0x68,
+  0xc4,
+  0x31,
+  0x74,
+  0xa8,
+  0x32,
+  0xfc,
+  0xb3,
+  0xad,
+  0xbc,
+  0x51,
+  0x53,
+  0x89,
+  0x65,
+  0xc5,
+  0x49,
+  0x28,
+  0x9f,
+  0x9c,
+  0xe4,
+  0xb8,
+  0x90,
+  0x02,
+  0x27,
+  0x30,
+  0x5f,
+  0x19,
+  0xba,
+  0x72,
+  0x0b,
+  0x8c,
+  0x78,
+  0xcb,
+  0x2e,
+  0x00,
+  0x7c,
+  0x2b,
+  0x9b,
+  0x0a,
+  0xa2,
+  0xd2,
+  0x20,
+  0x8b,
+  0x6c,
+  0xc0,
+  0xce,
+  0xae,
+  0x0e,
+  0x8f,
+  0xe7,
+  0xaf,
+  0xc7,
+  0x5d,
+  0xf9,
+  0xcb,
+  0x35,
+  0x79,
+  0xc0,
+  0x1e,
+  0x33,
+  0x5f,
+  0x05,
+  0x95,
+  0x0c,
+  0x6f,
+  0x43,
+  0xc7,
+  0x85,
+  0x52,
+  0xd9,
+  0x06,
+  0x58,
+  0xec,
+  0xe7,
+  0xdb,
+  0x6d,
+  0xba,
+  0xb4,
+  0x5b,
+  0x32,
+  0xeb,
+  0xe4,
+  0xb2,
+  0xd5,
+  0x77,
+  0x1c,
+  0xe6,
+  0x84,
+  0xaf,
+  0x2c,
+  0x12,
+  0x18,
+  0xf7,
+  0x3c,
+  0xbf,
+  0xa8,
+  0x90,
+  0xcb,
+  0x40,
+  0x46,
+  0xee,
+  0x48,
+  0x0c,
+  0x53,
+  0x80,
+  0x9a,
+  0x94,
+  0x4d,
+  0x73,
+  0x3e,
+  0x2f,
+  0x98,
+  0xc0,
+  0x25,
+  0x75,
+  0xbd,
+  0xe8,
+  0x99,
+  0x38,
+  0xad,
+  0xfa,
+  0xda,
+  0xcf,
+  0x3f,
+  0xe5,
+  0x4b,
+  0x38,
+  0x76,
+  0x3b,
+  0xe5,
+  0xa2,
+  0xef,
+  0x38,
+  0x11,
+  0xbd,
+  0x8d,
+  0x84,
+  0x75,
+  0x88,
+  0x72,
+  0xdd,
+  0xd4,
+  0xcd,
+  0x85,
+  0xcd,
+  0xd1,
+  0xc6,
+  0xae,
+  0xd1,
+  0xc2,
+  0xfa,
+  0xb1,
+  0xc4,
+  0xc2,
+  0xc9,
+  0x35,
+  0xc4,
+  0xc1,
+  0x3a,
+  0xbe,
+  0xcc,
+  0x08,
+  0x94,
+  0xba,
+  0x52,
+  0x98,
+  0xd6,
+  0xd4,
+  0x70,
+  0x84,
+  0x48,
+  0x3b,
+  0x9d,
+  0xfd,
+  0x24,
+  0x81,
+  0x50,
+  0xbf,
+  0xe2,
+  0x2b,
+  0xf5,
+  0x5f,
+  0x3b,
+  0x99,
+  0x76,
+  0x98,
+  0xc2,
+  0xf2,
+  0x36,
+  0x1c,
+  0x64,
+  0xea,
+  0xdc,
+  0xd7,
+  0x10,
+  0x0f,
+  0x76,
+  0xcc,
+  0x2c,
+  0x9e,
+  0x23,
+  0x45,
+  0x8b,
+  0x0f,
+  0x4e,
+  0x4b,
+  0x34,
+  0x89,
+  0x7d,
+  0x5b,
+  0x21,
+  0x8a,
+  0x25,
+  0x5b,
+  0x69,
+  0xe3,
+  0xde,
+  0xb4,
+  0xa9,
+  0xf7,
+  0x48,
+  0x9a,
+  0xea,
+  0x40,
+  0x3c,
+  0x9c,
+  0x41,
+  0x8f,
+  0x69,
+  0x3c,
+  0x10,
+  0x6e,
+  0xf8,
+  0x11,
+  0x7c,
+  0x73,
+  0xe9,
+  0x96,
+  0xed,
+  0x90,
+  0x9e,
+  0x07,
+  0x45,
+  0x65,
+  0x6b,
+  0x68,
+  0x5d,
+  0x9d,
+  0x72,
+  0xdb,
+  0xb2,
+  0xbc,
+  0x81,
+  0x65,
+  0xeb,
+  0x84,
+  0x33,
+  0xdc,
+  0xe9,
+  0x0f,
+  0xd5,
+  0x0e,
+  0xc8,
+  0x5e,
+  0x14,
+  0x80,
+  0x64,
+  0x0b,
+  0x9e,
+  0x46,
+  0xde,
+  0xbe,
+  0x9e,
+  0x12,
+  0xac,
+  0x50,
+  0xc4,
+  0x33,
+  0xce,
+  0xf7,
+  0xba,
+  0xc7,
+  0xdf,
+  0x43,
+  0x09,
+  0x9b,
+  0xa3,
+  0x21,
+  0xc5,
+  0xe0,
+  0x48,
+  0xe6,
+  0x19,
+  0xd8,
+  0xa6,
+  0x6f,
+  0x29,
+  0xb3,
+  0x0e,
+  0xc4,
+  0xc6,
+  0xe6,
+  0xdd,
+  0x96,
+  0xab,
+  0x54,
+  0xb9,
+  0x80,
+  0x73,
+  0x61,
+  0xe6,
+  0x85,
+  0x9b,
+  0xe5,
+  0x00,
+  0xfa,
+  0xe8,
+  0x04,
+  0xe5,
+  0x33,
+  0xfe,
+  0x7e,
+  0xae,
+  0xe7,
+  0x55,
+  0x53,
+  0xe4,
+  0x63,
+  0x6a,
+  0xfa,
+  0x76,
+  0x9e,
+  0x28,
+  0x88,
+  0xb8,
+  0xc6,
+  0x75,
+  0x4c,
+  0xa0,
+  0x9f,
+  0x01,
+  0xf9,
+  0x9e,
+  0x89,
+  0xf6,
+  0xce,
+  0x91,
+  0xbf,
+  0x4e,
+  0xfe,
+  0xbd,
+  0x52,
+  0xea,
+  0xfe,
+  0x06,
+  0xc5,
+  0xad,
+  0xcf,
+  0xb8,
+  0xa0,
+  0xec,
+  0x78,
+  0x4b,
+  0xec,
+  0x3b,
+  0x80,
+  0xf4,
+  0x84,
+  0xbe,
+  0x69,
+  0x5f,
+  0x5e,
+  0x7a,
+  0x13,
+  0x89,
+  0x95,
+  0x91,
+  0x07,
+  0x56,
+  0xdb,
+  0x5d,
+  0xfa,
+  0x10,
+  0xfc,
+  0x5d,
+  0x99,
+  0xb5,
+  0xe8,
+  0x59,
+  0x96,
+  0x15,
+  0x56,
+  0xe6,
+  0x8d,
+  0x06,
+  0x7f,
+  0x5e,
+  0x1b,
+  0xc6,
+  0x4c,
+  0xa6,
+  0x73,
+  0x28,
+  0x6a,
+  0xa5,
+  0xf3,
+  0xc1,
+  0x45,
+  0x86,
+  0x8d,
+  0x4a,
+  0x88,
+  0x94,
+  0x4d,
+  0x7f,
+  0x15,
+  0xe8,
+  0x9f,
+  0x19,
+  0x25,
+  0x86,
+  0xdc,
+  0x6b,
+  0xbd,
+  0x5d,
+  0xe0,
+  0x76,
+  0xa5,
+  0x2e,
+  0x58,
+  0xc2,
+  0xb3,
+  0xed,
+  0x2d,
+  0x7f,
+  0xb5,
+  0x83,
+  0xf1,
+  0xd5,
+  0x79,
+  0xb5,
+  0x5b,
+  0x55,
+  0x94,
+  0x18,
+  0x44,
+  0x43,
+  0x42,
+  0xe4,
+  0xe5,
+  0xbf,
+  0x59,
+  0xa2,
+  0x33,
+  0x05,
+  0x16,
+  0x2d,
+  0x9e,
+  0x01,
+  0x12,
+  0xd3,
+  0x3d,
+  0x29,
+  0x97,
+  0xaa,
+  0x9c,
+  0x63,
+  0x17,
+  0x5c,
+  0x39,
+  0xef,
+  0xe9,
+  0xa5,
+  0x70,
+  0x24,
+  0xb7,
+  0x31,
+  0x97,
+  0xab,
+  0x18,
+  0xae,
+  0x9d,
+  0xa0,
+  0x12,
+  0xde,
+  0x36,
+  0x7e,
+  0x1d,
+  0x91,
+  0xbf,
+  0x77,
+  0x14,
+  0xdf,
+  0x6b,
+  0xc6,
+  0xb6,
+  0x11,
+  0x04,
+  0x25,
+  0xef,
+  0x52,
+  0x0b,
+  0x42,
+  0xff,
+  0xc4,
+  0x6b,
+  0x19,
+  0x44,
+  0xcd,
+  0xbd,
+  0x38,
+  0x02,
+  0xa2,
+  0x47,
+  0x8f,
+  0x95,
+  0x37,
+  0x9d,
+  0x5b,
+  0x32,
+  0x37,
+  0x08,
+  0x4e,
+  0x03,
+  0x5f,
+  0x18,
+  0x03,
+  0xa9,
+  0xbe,
+  0xe1,
+  0x70,
+  0x44,
+  0xe0,
+  0xc7,
+  0xc6,
+  0x76,
+  0x19,
+  0xe5,
+  0x08,
+  0x82,
+  0xb2,
+  0x07,
+  0x96,
+  0xa7,
+  0xb5,
+  0x07,
+  0xfd,
+  0x67,
+  0x46,
+  0x9d,
+  0x87,
+  0x77,
+  0x9b,
+  0xd1,
+  0xaa,
+  0x4d,
+  0xc3,
+  0x12,
+  0x22,
+  0xfd,
+  0x61,
+  0xee,
+  0xe1,
+  0xb6,
+  0x71,
+  0x83,
+  0xc9,
+  0x0d,
+  0x57,
+  0xf1,
+  0xed,
+  0xc2,
+  0xdf,
+  0xeb,
+  0x3a,
+  0x2a,
+  0xf6,
+  0xb7,
+  0x24,
+  0xac,
+  0x1b,
+  0x89,
+  0xc8,
+  0xdc,
+  0x69,
+  0x15,
+  0xc4,
+  0x20,
+  0xe9,
+  0x43,
+  0x32,
+  0xde,
+  0xde,
+  0xa8,
+  0x81,
+  0x1c,
+  0x10,
+  0x8f,
+  0xf8,
+  0x04,
+  0xca,
+  0x1f,
+  0x98,
+  0x13,
+  0x9b,
+  0xa5,
+  0xa6,
+  0x02,
+  0x36,
+  0xc7,
+  0xd3,
+  0x6c,
+  0x49,
+  0x60,
+  0x37,
+  0x25,
+  0x9a,
+  0xe0,
+  0xea,
+  0xf4,
+  0xfd,
+  0x93,
+  0xdb,
+  0xd8,
+  0x78,
+  0xb7,
+  0xfe,
+  0x40,
+  0x74,
+  0x99,
+  0x80,
+  0x9a,
+  0x90,
+  0x83,
+  0x28,
+  0x6d,
+  0x01,
+  0x61,
+  0xd4,
+  0x4f,
+  0x1d,
+  0x89,
+  0x6e,
+  0x95,
+  0x77,
+  0x24,
+  0xd2,
+  0xf1,
+  0xbb,
+  0x6f,
+  0xd9,
+  0xad,
+  0x0f,
+  0xde,
+  0x63,
+  0xf7,
+  0xfa,
+  0x22,
+  0x6b,
+  0x91,
+  0x1e,
+  0xf9,
+  0xf9,
+  0x01,
+  0x51,
+  0xde,
+  0x79,
+  0xec,
+  0x9f,
+  0x3f,
+  0x28,
+  0xdf,
+  0x82,
+  0x84,
+  0xbd,
+  0xa3,
+  0x5e,
+  0xb2,
+  0xf8,
+  0x8b,
+  0x75,
+  0xdc,
+  0xf3,
+  0x88,
+  0x78,
+  0x50,
+  0xb6,
+  0x87,
+  0xa7,
+  0x37,
+  0x95,
+  0xcb,
+  0xb8,
+  0xb3,
+  0xa4,
+  0x58,
+  0xe2,
+  0xf7,
+  0x2c,
+  0x95,
+  0x9c,
+  0x69,
+  0x2e,
+  0xe1,
+  0xbd,
+  0xc4,
+  0x87,
+  0x19,
+  0x45,
+  0x9b,
+  0x3f,
+  0x7e,
+  0x40,
+  0x8b,
+  0xd4,
+  0x40,
+  0x1b,
+  0x28,
+  0xb2,
+  0x61,
+  0x6d,
+  0x96,
+  0x6d,
+  0x56,
+  0xae,
+  0xec,
+  0x06,
+  0xe6,
+  0x61,
+  0x06,
+  0x3a,
+  0x0f,
+  0x10,
+  0x49,
+  0xbd,
+  0xd0,
+  0x8f,
+  0xd9,
+  0xd3,
+  0xa0,
+  0x3c,
+  0x1d,
+  0x0d,
+  0xef,
+  0x64,
+  0xb5,
+  0xd4,
+  0x08,
+  0xa6,
+  0x37,
+  0x55,
+  0x53,
+  0xaa,
+  0x98,
+  0x94,
+  0x41,
+  0x7d,
+  0x48,
+  0x13,
+  0x36,
+  0xaa,
+  0x3d,
+  0x12,
+  0xeb,
+  0x30,
+  0x91,
+  0xaa,
+  0x40,
+  0x63,
+  0x23,
+  0xe5,
+  0xc2,
+  0x83,
+  0x1e,
+  0xaa,
+  0xe1,
+  0x78,
+  0xd4,
+  0x9d,
+  0x54,
+  0xdc,
+  0xb8,
+  0xf3,
+  0xd8,
+  0x24,
+  0x5e,
+  0xe8,
+  0x5b,
+  0xcb,
+  0x46,
+  0x74,
+  0x09,
+  0x00,
+  0xb2,
+  0x75,
+  0x9a,
+  0xcf,
+  0x36,
+  0x0b,
+  0xb6,
+  0xfe,
+  0xb4,
+  0x5d,
+  0x1d,
+  0xb5,
+  0x87,
+  0x60,
+  0xeb,
+  0xba,
+  0xba,
+  0xe0,
+  0x2e,
+  0xb8,
+  0xa5,
+  0x3d,
+  0x5b,
+  0x4c,
+  0xca,
+  0x2c,
+  0x16,
+  0x19,
+  0x62,
+  0x1e,
+  0xa2,
+  0xbf,
+  0xa9,
+  0x68,
+  0xde,
+  0xbe,
+  0x1b,
+  0x2c,
+  0x61,
+  0x8d,
+  0x52,
+  0x06,
+  0xb0,
+  0x58,
+  0xad,
+  0x81,
+  0xa6,
+  0x1b,
+  0x04,
+  0x02,
+  0xfa,
+  0x37,
+  0xf1,
+  0xd3,
+  0x13,
+  0xed,
+  0x37,
+  0x88,
+  0x6b,
+  0x1f,
+  0xc8,
+  0x5c,
+  0x3c,
+  0x41,
+  0x1e,
+  0x84,
+  0x73,
+  0xef,
+  0xc4,
+  0x41,
+  0x13,
+  0xcf,
+  0xae,
+  0xcf,
+  0xbd,
+  0x10,
+  0xf7,
+  0x5a,
+  0x67,
+  0x8d,
+  0x48,
+  0xc0,
+  0xae,
+  0x3a,
+  0x68,
+  0xc8,
+  0x38,
+  0x37,
+  0x3c,
+  0x22,
+  0x9c,
+  0x0a,
+  0x73,
+  0xdc,
+  0xb4,
+  0x8e,
+  0xce,
+  0x74,
+  0x76,
+  0x0b,
+  0x92,
+  0x32,
+  0x99,
+  0x92,
+  0xd9,
+  0xb9,
+  0xc6,
+  0x3f,
+  0x19,
+  0xed,
+  0xfe,
+  0xfd,
+  0x8b,
+  0xf4,
+  0xb9,
+  0x86,
+  0x92,
+  0x39,
+  0x40,
+  0x87,
+  0x53,
+  0xdf,
+  0x1b,
+  0xde,
+  0x13,
+  0xe5,
+  0x4a,
+  0x81,
+  0x8f,
+  0x8e,
+  0xc5,
+  0x9b,
+  0xcd,
+  0x63,
+  0x9f,
+  0x46,
+  0x71,
+  0x01,
+  0x4f,
+  0xa3,
+  0xa2,
+  0xef,
+  0x32,
+  0x54,
+  0x04,
+  0x1f,
+  0x7e,
+  0x6b,
+  0xbe,
+  0x84,
+  0x3c,
+  0x49,
+  0x5c,
+  0x5b,
+  0xd7,
+  0x7c,
+  0x93,
+  0x2f,
+  0x20,
+  0x74,
+  0xcc,
+  0x40,
+  0xf2,
+  0x21,
+  0x87,
+  0x11,
+  0xc2,
+  0xba,
+  0xfb,
+  0x20,
+  0xdb,
+  0xd6,
+  0xd9,
+  0x7c,
+  0xce,
+  0xee,
+  0x68,
+  0xa3,
+  0xe7,
+  0x1e,
+  0x86,
+  0x4a,
+  0x94,
+  0x2f,
+  0x50,
+  0x8a,
+  0x2e,
+  0xe1,
+  0x25,
+  0xaa,
+  0x8c,
+  0xf1,
+  0x87,
+  0x7c,
+  0xc3,
+  0x31,
+  0xcd,
+  0x4c,
+  0xf1,
+  0x24,
+  0xd7,
+  0xf2,
+  0x86,
+  0xfb,
+  0x79,
+  0x67,
+  0x96,
+  0x3e,
+  0x6a,
+  0x69,
+  0x6c,
+  0xaf,
+  0x44,
+  0x18,
+  0xe0,
+  0xf5,
+  0x16,
+  0x5f,
+  0x6d,
+  0x64,
+  0x3f,
+  0x7d,
+  0x8e,
+  0x88,
+  0x51,
+  0x3b,
+  0xad,
+  0xf5,
+  0x9e,
+  0x56,
+  0x58,
+  0x37,
+  0xd4,
+  0x70,
+  0x21,
+  0xb5,
+  0xd3,
+  0x1e,
+  0x62,
+  0xda,
+  0x5b,
+  0x01,
+  0x82,
+  0xd8,
+  0xff,
+  0xaf,
+  0x57,
+  0xd4,
+  0x74,
+  0x0e,
+  0xa4,
+  0x1b,
+  0xf6,
+  0xe2,
+  0x0d,
+  0x71,
+  0xae,
+  0xc6,
+  0xed,
+  0x55,
+  0x46,
+  0x30,
+  0xab,
+  0xab,
+  0xa9,
+  0x1d,
+  0x01,
+  0xb9,
+  0x93,
+  0x7d,
+  0x33,
+  0x11,
+  0x96,
+  0x19,
+  0xbb,
+  0x0c,
+  0x61,
+  0xe6,
+  0x7c,
+  0xfa,
+  0x26,
+  0x10,
+  0x5a,
+  0x0c,
+  0x19,
+  0xd4,
+  0x5f,
+  0x8e,
+  0xd5,
+  0xaf,
+  0x40,
+  0x1d,
+  0xa3,
+  0xff,
+  0x20,
+  0x15,
+  0x14,
+  0xab,
+  0x06,
+  0x5b,
+  0x20,
+  0xb2,
+  0xa8,
+  0xc8,
+  0x3b,
+  0xa2,
+  0xd6,
+  0x29,
+  0x78,
+  0x85,
+  0x1f,
+  0xbe,
+  0x91,
+  0x2c,
+  0x71,
+  0x27,
+  0xb6,
+  0xcf,
+  0x7d,
+  0xb3,
+  0x4d,
+  0x5b,
+  0x18,
+  0x88,
+  0x66,
+  0x31,
+  0x79,
+  0xc1,
+  0xcf,
+  0x02,
+  0x87,
+  0x33,
+  0x78,
+  0x03,
+  0x20,
+  0x88,
+  0xff,
+  0x30,
+  0x94,
+  0xa6,
+  0xc5,
+  0x76,
+  0x38,
+  0x54,
+  0xc4,
+  0x62,
+  0x4d,
+  0x51,
+  0x54,
+  0xfb,
+  0xce,
+  0xa8,
+  0x1b,
+  0x95,
+  0xd4,
+  0xfa,
+  0xb1,
+  0x7f,
+  0x83,
+  0xd2,
+  0x2b,
+  0xcb,
+  0x9b,
+  0xd4,
+  0x31,
+  0x0f,
+  0x37,
+  0xff,
+  0x1a,
+  0x28,
+  0x80,
+  0x2a,
+  0x2d,
+  0x49,
+  0x0e,
+  0x3f,
+  0xe8,
+  0x9e,
+  0x18,
+  0x90,
+  0xd3,
+  0xef,
+  0xbc,
+  0x43,
+  0xd3,
+  0x7a,
+  0x5e,
+  0x8d,
+  0x58,
+  0xb3,
+  0xc1,
+  0xa2,
+  0x53,
+  0xe9,
+  0x18,
+  0xc2,
+  0x4b,
+  0xda,
+  0x9f,
+  0x62,
+  0x3d,
+  0xa2,
+  0x2c,
+  0x1f,
+  0xc1,
+  0x5b,
+  0x87,
+  0xa2,
+  0x68,
+  0xb7,
+  0xc2,
+  0xd5,
+  0x1b,
+  0x36,
+  0xa5,
+  0xf1,
+  0xef,
+  0x17,
+  0x5f,
+  0x59,
+  0xec,
+  0xc5,
+  0x50,
+  0x0a,
+  0x26,
+  0xde,
+  0x51,
+  0x36,
+  0x64,
+  0xbe,
+  0xd5,
+  0x97,
+  0x77,
+  0xc0,
+  0x66,
+  0x5b,
+  0x55,
+  0xb8,
+  0x13,
+  0xfd,
+  0x17,
+  0x0f,
+  0xf1,
+  0x52,
+  0xb8,
+  0xbb,
+  0x0e,
+  0xf9,
+  0xcf,
+  0x44,
+  0xdd,
+  0xb8,
+  0x2d,
+  0xdd,
+  0xf0,
+  0xd1,
+  0x9c,
+  0x54,
+  0xa7,
+  0x00,
+  0x38,
+  0x5e,
+  0x9c,
+  0x20,
+  0x60,
+  0x3e,
+  0x1c,
+  0x69,
+  0x79,
+  0xa6,
+  0x9a,
+  0x7a,
+  0xe7,
+  0x16,
+  0xa2,
+  0x26,
+  0x9b,
+  0x0c,
+  0x1b,
+  0x62,
+  0x92,
+  0xa0,
+  0x82,
+  0x6f,
+  0x7a,
+  0xe2,
+  0x9a,
+  0xc8,
+  0xe0,
+  0xac,
+  0xb5,
+  0x62,
+  0xfc,
+  0x39,
+  0x17,
+  0xd8,
+  0x95,
+  0x39,
+  0xb4,
+  0x59,
+  0x4b,
+  0x07,
+  0x56,
+  0x70,
+  0xd7,
+  0x5e,
+  0x4c,
+  0x06,
+  0xca,
+  0x12,
+  0xd0,
+  0x85,
+  0xef,
+  0xd0,
+  0x4c,
+  0x12,
+  0xf1,
+  0x3b,
+  0xdf,
+  0xd7,
+  0x2f,
+  0x7d,
+  0xac,
+  0xca,
+  0x30,
+  0x47,
+  0x00,
+  0x40,
+  0x3c,
+  0xa4,
+  0xce,
+  0xab,
+  0xf0,
+  0x96,
+  0x0b,
+  0x2d,
+  0x07,
+  0x5c,
+  0x83,
+  0x80,
+  0x54,
+  0x59,
+  0x65,
+  0x09,
+  0x57,
+  0x70,
+  0x8d,
+  0x25,
+  0x8d,
+  0x6e,
+  0x4a,
+  0x77,
+  0x5e,
+  0x30,
+  0xe0,
+  0xc4,
+  0x0c,
+  0xb7,
+  0xf9,
+  0x51,
+  0xba,
+  0x0c,
+  0x8f,
+  0x6f,
+  0x9a,
+  0xe1,
+  0xce,
+  0x5a,
+  0x06,
+  0xd7,
+  0x16,
+  0x34,
+  0x9b,
+  0x50,
+  0x91,
+  0x34,
+  0x0c,
+  0x34,
+  0xcb,
+  0xb7,
+  0x73,
+  0xc8,
+  0x88,
+  0x34,
+  0xaf,
+  0xb6,
+  0x4d,
+  0x1a,
+  0xfb,
+  0x2c,
+  0x9a,
+  0xb1,
+  0xbf,
+  0xda,
+  0xb2,
+  0x88,
+  0x4a,
+  0x0e,
+  0x0b,
+  0x96,
+  0xc2,
+  0x4b,
+  0x76,
+  0xd4,
+  0x64,
+  0x54,
+  0x8d,
+  0x82,
+  0xe5,
+  0xda,
+  0xc8,
+  0xb5,
+  0x4f,
+  0xb3,
+  0xb6,
+  0x3d,
+  0xa5,
+  0x47,
+  0x41,
+  0xde,
+  0xfe,
+  0x11,
+  0x36,
+  0x6a,
+  0x6f,
+  0xad,
+  0x76,
+  0xe5,
+  0xab,
+  0x4c,
+  0x56,
+  0x04,
+  0xc8,
+  0xb4,
+  0x2f,
+  0x9f,
+  0x02,
+  0x12,
+  0x5f,
+  0x5c,
+  0x1c,
+  0xce,
+  0x20,
+  0x77,
+  0x45,
+  0x63,
+  0x20,
+  0x04,
+  0xb0,
+  0x1b,
+  0xdf,
+  0xaf,
+  0x60,
+  0x36,
+  0x6a,
+  0x3d,
+  0x54,
+  0x94,
+  0x02,
+  0xfa,
+  0x40,
+  0xa7,
+  0xc3,
+  0xa1,
+  0xb7,
+  0xad,
+  0x92,
+  0xcc,
+  0x9d,
+  0xaa,
+  0x86,
+  0xd6,
+  0x82,
+  0xd7,
+  0xd2,
+  0x48,
+  0x34,
+  0x87,
+  0xe9,
+  0x4b,
+  0x0d,
+  0xc4,
+  0x7a,
+  0x5b,
+  0x3c,
+  0x6d,
+  0xa7,
+  0x30,
+  0x0c,
+  0x04,
+  0x84,
+  0xe0,
+  0x44,
+  0xeb,
+  0x58,
+  0x0c,
+  0xf9,
+  0xd1,
+  0xf3,
+  0x6f,
+  0xe1,
+  0xfb,
+  0x65,
+  0x04,
+  0x0f,
+  0xbd,
+  0x74,
+  0xa6,
+  0x54,
+  0xe8,
+  0x4c,
+  0x30,
+  0x96,
+  0x3a,
+  0x95,
+  0x50,
+  0xaf,
+  0x2b,
+  0x93,
+  0x88,
+  0x20,
+  0x19,
+  0x0f,
+  0x74,
+  0x11,
+  0xe8,
+  0x20,
+  0x70,
+  0x10,
+  0x1c,
+  0x2f,
+  0x7a,
+  0x6b,
+  0xb5,
+  0x96,
+  0x20,
+  0xc6,
+  0xf8,
+  0x87,
+  0x4c,
+  0xdd,
+  0xdc,
+  0x07,
+  0x5f,
+  0xed,
+  0x49,
+  0x5c,
+  0x3d,
+  0xdf,
+  0x84,
+  0x92,
+  0xe7,
+  0xca,
+  0x2f,
+  0x3e,
+  0xba,
+  0x07,
+  0x59,
+  0x10,
+  0x7a,
+  0xbb,
+  0x6d,
+  0xb1,
+  0x61,
+  0x72,
+  0x77,
+  0xa0,
+  0xc9,
+  0x93,
+  0xb9,
+  0x61,
+  0xe7,
+  0xf9,
+  0xc4,
+  0x81,
+  0x0f,
+  0x9a,
+  0x0e,
+  0x2e,
+  0x04,
+  0x35,
+  0x90,
+  0x09,
+  0x5e,
+  0xfb,
+  0x05,
+  0x03,
+  0x65,
+  0x80,
+  0x1b,
+  0xa5,
+  0x98,
+  0x1b,
+  0x45,
+  0x60,
+  0x94,
+  0x03,
+  0x1b,
+  0x42,
+  0x45,
+  0x3d,
+  0xe6,
+  0x6c,
+  0x58,
+  0x9f,
+  0x62,
+  0xc8,
+  0xf0,
+  0x59,
+  0xa0,
+  0x8b,
+  0xf6,
+  0xba,
+  0xe6,
+  0xdd,
+  0xb0,
+  0xc1,
+  0x13,
+  0x16,
+  0x43,
+  0x6c,
+  0x7d,
+  0x55,
+  0xf8,
+  0xc8,
+  0xae,
+  0xe5,
+  0x11,
+  0x22,
+  0xa1,
+  0xab,
+  0xcb,
+  0xc4,
+  0x4d,
+  0xa0,
+  0x69,
+  0xa4,
+  0x7b,
+  0x24,
+  0x68,
+  0xcb,
+  0x98,
+  0xc3,
+  0x41,
+  0x93,
+  0x75,
+  0x10,
+  0x89,
+  0xa5,
+  0x13,
+  0xe5,
+  0xe7,
+  0x44,
+  0x87,
+  0x83,
+  0x33,
+  0x6b,
+  0xfb,
+  0x13,
+  0x21,
+  0x51,
+  0x02,
+  0x76,
+  0x4d,
+  0x46,
+  0x2c,
+  0x14,
+  0x40,
+  0x06,
+  0x2c,
+  0x38,
+  0x0e,
+  0x3e,
+  0x6c,
+  0xc7,
+  0xb9,
+  0x26,
+  0xee,
+  0xe5,
+  0x15,
+  0xdc,
+  0x60,
+  0x9d,
+  0x5f,
+  0xf2,
+  0xca,
+  0x97,
+  0xe3,
+  0xcc,
+  0x68,
+  0xcd,
+  0x22,
+  0x86,
+  0x86,
+  0x94,
+  0x80,
+  0xbb,
+  0xb9,
+  0x27,
+  0x55,
+  0xfc,
+  0x0d,
+  0x88,
+  0x8a,
+  0xb4,
+  0x9c,
+  0x61,
+  0x3f,
+  0xa5,
+  0x0a,
+  0x14,
+  0xbf,
+  0xbc,
+  0xc4,
+  0x51,
+  0x61,
+  0x2c,
+  0x55,
+  0x20,
+  0x2a,
+  0x31,
+  0x48,
+  0x89,
+  0xa3,
+  0x2f,
+  0x90,
+  0xc5,
+  0xc5,
+  0xa6,
+  0xb1,
+  0x52,
+  0x29,
+  0x08,
+  0x2f,
+  0x08,
+  0x92,
+  0x35,
+  0xf3,
+  0xd3,
+  0x20,
+  0x83,
+  0xe1,
+  0x1d,
+  0xdc,
+  0x15,
+  0x18,
+  0x84,
+  0xb3,
+  0x77,
+  0x18,
+  0xbd,
+  0xf8,
+  0x96,
+  0x9d,
+  0x74,
+  0x97,
+  0x50,
+  0xee,
+  0xa9,
+  0xbe,
+  0xa1,
+  0x37,
+  0xdb,
+  0x71,
+  0x38,
+  0x97,
+  0xff,
+  0x62,
+  0x87,
+  0x40,
+  0x7c,
+  0xb1,
+  0x7f,
+  0x56,
+  0x4e,
+  0x05,
+  0xa3,
+  0x03,
+  0x4f,
+  0x52,
+  0x2e,
+  0xe4,
+  0xf2,
+  0x47,
+  0xcc,
+  0xe4,
+  0x4b,
+  0x58,
+  0x42,
+  0xee,
+  0x3a,
+  0x1e,
+  0x79,
+  0xe9,
+  0xd6,
+  0x16,
+  0x81,
+  0x6d,
+  0xb0,
+  0x08,
+  0x9e,
+  0x8e,
+  0x5a,
+  0x70,
+  0xcd,
+  0x9b,
+  0xd5,
+  0xa2,
+  0xd2,
+  0xdd,
+  0x0f,
+  0xa3,
+  0xa2,
+  0xbe,
+  0xbb,
+  0x76,
+  0xfd,
+  0x5b,
+  0x5c,
+  0x0c,
+  0x76,
+  0xe9,
+  0x73,
+  0xc4,
+  0xc8,
+  0xbd,
+  0x4f,
+  0xb8,
+  0x7a,
+  0xe6,
+  0x87,
+  0x1e,
+  0xda,
+  0x90,
+  0x37,
+  0x3b,
+  0xca,
+  0xcf,
+  0xf2,
+  0x96,
+  0x83,
+  0xbe,
+  0xe4,
+  0xc8,
+  0x8a,
+  0x1a,
+  0xaa,
+  0xed,
+  0xc0,
+  0xd2,
+  0x47,
+  0x2e,
+  0x21,
+  0xfc,
+  0xf4,
+  0x92,
+  0xca,
+  0xd1,
+  0x66,
+  0x93,
+  0x1f,
+  0x33,
+  0x5d,
+  0xa5,
+  0xe0,
+  0x58,
+  0xcd,
+  0x01,
+  0xe0,
+  0x32,
+  0x08,
+  0xaf,
+  0x73,
+  0x3a,
+  0x35,
+  0xf3,
+  0x16,
+  0x70,
+  0x7c,
+  0xda,
+  0x61,
+  0x4f,
+  0xe3,
+  0xd8,
+  0x34,
+  0x31,
+  0x28,
+  0x26,
+  0xc9,
+  0xe2,
+  0x8b,
+  0xf5,
+  0x63,
+  0x1a,
+  0x40,
+  0x46,
+  0xb3,
+  0x46,
+  0x88,
+  0x77,
+  0x30,
+  0x71,
+  0xf0,
+  0x11,
+  0x6c,
+  0x23,
+  0x68,
+  0x90,
+  0x79,
+  0x47,
+  0x56,
+  0xee,
+  0xec,
+  0x01,
+  0xc2,
+  0x6f,
+  0x2f,
+  0x8d,
+  0xd2,
+  0x32,
+  0xa0,
+  0x54,
+  0x26,
+  0x4a,
+  0x41,
+  0x12,
+  0xfb,
+  0x18,
+  0xce,
+  0x53,
+  0x8e,
+  0xb5,
+  0x39,
+  0x48,
+  0x64,
+  0x9a,
+  0x03,
+  0x01,
+  0x0c,
+  0x66,
+  0xd3,
+  0xee,
+  0xdc,
+  0x5a,
+  0x79,
+  0xa1,
+  0x71,
+  0xdc,
+  0x82,
+  0x69,
+  0xec,
+  0x10,
+  0xd4,
+  0xc7,
+  0x91,
+  0x24,
+  0x25,
+  0xb8,
+  0x2b,
+  0x72,
+  0x75,
+  0x87,
+  0x4f,
+  0xf4,
+  0x74,
+  0x60,
+  0xa0,
+  0x67,
+  0xb2,
+  0x99,
+  0x02,
+  0x93,
+  0x07,
+  0x82,
+  0x86,
+  0xed,
+  0xd6,
+  0x3a,
+  0xc3,
+  0xcd,
+  0xe8,
+  0x87,
+  0x5a,
+  0xfa,
+  0x56,
+  0xe9,
+  0x1c,
+  0xa8,
+  0x61,
+  0xbb,
+  0xc1,
+  0xbb,
+  0x06,
+  0xd8,
+  0xda,
+  0x12,
+  0xe3,
+  0x4c,
+  0xd2,
+  0x12,
+  0xe8,
+  0xeb,
+  0x3e,
+  0x28,
+  0x56,
+  0xc7,
+  0x1d,
+  0x44,
+  0x02,
+  0xc3,
+  0xdf,
+  0x5f,
+  0xa6,
+  0x70,
+  0x48,
+  0xea,
+  0xea,
+  0x78,
+  0xa5,
+  0x53,
+  0x83,
+  0x98,
+  0x61,
+  0x45,
+  0x0e,
+  0x00,
+  0xfd,
+  0x72,
+  0x5e,
+  0x5b,
+  0x04,
+  0x48,
+  0x60,
+  0x65,
+  0x15,
+  0xa7,
+  0x94,
+  0x88,
+  0x7c,
+  0x0d,
+  0xbc,
+  0x70,
+  0x68,
+  0xbf,
+  0x3b,
+  0xcb,
+  0xaa,
+  0x96,
+  0x0c,
+  0x2a,
+  0xb0,
+  0xe0,
+  0x0b,
+  0x9a,
+  0x06,
+  0x1f,
+  0x8d,
+  0x21,
+  0x95,
+  0xe0,
+  0xab,
+  0x33,
+  0xaf,
+  0xf2,
+  0x76,
+  0xfe,
+  0xb1,
+  0x13,
+  0x2c,
+  0xee,
+  0xdf,
+  0x4e,
+  0x62,
+  0x6b,
+  0xd2,
+  0x8c,
+  0x63,
+  0xab,
+  0xcd,
+  0x9d,
+  0xc8,
+  0x41,
+  0x0f,
+  0xd2,
+  0x5f,
+  0x78,
+  0xc8,
+  0xdc,
+  0x29,
+  0xe7,
+  0xb3,
+  0x7f,
+  0xae,
+  0x50,
+  0xe1,
+  0xcf,
+  0xef,
+  0xa2,
+  0x27,
+  0x6f,
+  0x8a,
+  0x82,
+  0x83,
+  0x18,
+  0x4d,
+  0xb3,
+  0xb1,
+  0x89,
+  0x54,
+  0xf1,
+  0x62,
+  0xf7,
+  0xc6,
+  0x00,
+  0x0a,
+  0x8d,
+  0xd9,
+  0x17,
+  0xde,
+  0xdc,
+  0xac,
+  0x02,
+  0xad,
+  0xcc,
+  0x7d,
+  0x03,
+  0x52,
+  0x67,
+  0xb6,
+  0x60,
+  0xd1,
+  0x1e,
+  0x63,
+  0xf0,
+  0xe5,
+  0x92,
+  0xb5,
+  0xe9,
+  0xf2,
+  0xa3,
+  0xf8,
+  0xc1,
+  0x5d,
+  0x0b,
+  0x30,
+  0x63,
+  0x83,
+  0x6b,
+  0x6a,
+  0x68,
+  0x65,
+  0x39,
+  0x23,
+  0x65,
+  0x28,
+  0x67,
+  0x4c,
+  0xbf,
+  0x01,
+  0xd6,
+  0x44,
+  0x57,
+  0xc5,
+  0x58,
+  0x9b,
+  0x19,
+  0xbd,
+  0x4b,
+  0x35,
+  0xef,
+  0x91,
+  0x86,
+  0xb1,
+  0xe0,
+  0xb2,
+  0x90,
+  0xb0,
+  0x31,
+  0x03,
+  0xe9,
+  0x07,
+  0x9c,
+  0x61,
+  0x35,
+  0xe8,
+  0x02,
+  0xd3,
+  0x53,
+  0x00,
+  0xa3,
+  0x5e,
+  0xa4,
+  0xf0,
+  0xcd,
+  0x4e,
+  0xfa,
+  0xa7,
+  0x76,
+  0x1b,
+  0xd8,
+  0x70,
+  0x45,
+  0x1f,
+  0xca,
+  0xc0,
+  0xe9,
+  0xb9,
+  0x02,
+  0x3c,
+  0x2c,
+  0x17,
+  0x07,
+  0xe8,
+  0x8b,
+  0x80,
+  0x43,
+  0x96,
+  0x61,
+  0xa4,
+  0x4c,
+  0x11,
+  0x17,
+  0xe1,
+  0xab,
+  0x70,
+  0xfe,
+  0x14,
+  0xe7,
+  0x3d,
+  0xdc,
+  0x71,
+  0xc0,
+  0x63,
+  0x96,
+  0x78,
+  0x7b,
+  0x4c,
+  0xb4,
+  0xee,
+  0x56,
+  0x34,
+  0x7f,
+  0x15,
+  0xff,
+  0xb5,
+  0xe5,
+  0x65,
+  0x36,
+  0xdf,
+  0x56,
+  0x0b,
+  0x32,
+  0x6a,
+  0xca,
+  0x38,
+  0x54,
+  0x99,
+  0xe7,
+  0xd0,
+  0x30,
+  0x0b,
+  0x9d,
+  0x8c,
+  0x7d,
+  0x81,
+  0xd5,
+  0x4b,
+  0x91,
+  0x5f,
+  0x24,
+  0x7c,
+  0xe8,
+  0x9b,
+  0x23,
+  0x58,
+  0xd1,
+  0x10,
+  0x45,
+  0x19,
+  0xce,
+  0x32,
+  0x7a,
+  0x1e,
+  0x8a,
+  0xba,
+  0x58,
+  0x55,
+  0x2a,
+  0x46,
+  0x4e,
+  0xcf,
+  0x82,
+  0x5b,
+  0xfe,
+  0xed,
+  0x83,
+  0xbc,
+  0xf7,
+  0xf4,
+  0x43,
+  0x01,
+  0x6d,
+  0xaa,
+  0x22,
+  0xf3,
+  0x1e,
+  0x2a,
+  0x4b,
+  0x26,
+  0xc7,
+  0x3f,
+  0xd7,
+  0xe8,
+  0xdc,
+  0x2d,
+  0x54,
+  0xd1,
+  0x40,
+  0x5e,
+  0xb2,
+  0x89,
+  0x16,
+  0xb7,
+  0xc8,
+  0x6c,
+  0x4e,
+  0xeb,
+  0x02,
+  0x05,
+  0xd3,
+  0x83,
+  0x98,
+  0x69,
+  0x2e,
+  0x0a,
+  0x50,
+  0x51,
+  0xf7,
+  0xbc,
+  0xcd,
+  0x39,
+  0xa3,
+  0x15,
+  0x2d,
+  0xe9,
+  0x9e,
+  0xc4,
+  0x1d,
+  0x0d,
+  0x36,
+  0xdd,
+  0xe2,
+  0x7a,
+  0x85,
+  0x26,
+  0xe3,
+  0xcc,
+  0x5a,
+  0xc7,
+  0xe4,
+  0x8a,
+  0xdb,
+  0x28,
+  0x51,
+  0xb0,
+  0xb2,
+  0x7b,
+  0x26,
+  0xf8,
+  0xb7,
+  0x65,
+  0x7e,
+  0xd1,
+  0x8b,
+  0x39,
+  0x52,
+  0x7c,
+  0x68,
+  0x15,
+  0x59,
+  0xea,
+  0x99,
+  0xe9,
+  0x3d,
+  0x67,
+  0xbf,
+  0x5e,
+  0x28,
+  0xa7,
+  0xa0,
+  0xc2,
+  0x75,
+  0x14,
+  0x76,
+  0x97,
+  0x62,
+  0x52,
+  0xe7,
+  0xe7,
+  0x27,
+  0xde,
+  0x8e,
+  0x45,
+  0x84,
+  0xce,
+  0x0f,
+  0xad,
+  0xc3,
+  0x02,
+  0x37,
+  0x60,
+  0xf5,
+  0xb1,
+  0x79,
+  0x01,
+  0x3c,
+  0x9e,
+  0xb8,
+  0x50,
+  0x87,
+  0xb6,
+  0x6f,
+  0xb2,
+  0x4d,
+  0x99,
+  0xee,
+  0xea,
+  0x2c,
+  0xad,
+  0x1b,
+  0x62,
+  0x5f,
+  0x47,
+  0xfb,
+  0xf2,
+  0xd8,
+  0x0a,
+  0x21,
+  0x05,
+  0x94,
+  0x5d,
+  0xc1,
+  0xc3,
+  0x3b,
+  0x71,
+  0xe7,
+  0xa8,
+  0xd4,
+  0x61,
+  0x80,
+  0xf1,
+  0x60,
+  0xa2,
+  0x99,
+  0x0f,
+  0xe0,
+  0x0a,
+  0xd7,
+  0xbc,
+  0x23,
+  0x01,
+  0xa6,
+  0xf3,
+  0xe7,
+  0xa9,
+  0xd1,
+  0x66,
+  0xd5,
+  0x9e,
+  0xd4,
+  0xb9,
+  0x61,
+  0xe1,
+  0xa4,
+  0x47,
+  0xae,
+  0x12,
+  0x0e,
+  0x60,
+  0x34,
+  0x56,
+  0x2d,
+  0x28,
+  0x6f,
+  0x15,
+  0xcd,
+  0x13,
+  0x8d,
+  0xd5,
+  0x9f,
+  0xf7,
+  0xf7,
+  0x7f,
+  0x4c,
+  0x59,
+  0xb8,
+  0x5f,
+  0x10,
+  0x97,
+  0xb6,
+  0xd7,
+  0x68,
+  0x46,
+  0x49,
+  0xee,
+  0xad,
+  0x08,
+  0x75,
+  0x25,
+  0xff,
+  0x90,
+  0x18,
+  0xc6,
+  0xaa,
+  0x79,
+  0x7e,
+  0xd7,
+  0x4d,
+  0x83,
+  0x1d,
+  0x97,
+  0x13,
+  0x2e,
+  0xef,
+  0x4f,
+  0x76,
+  0x26,
+  0xea,
+  0x22,
+  0x06,
+  0xc5,
+  0xd9,
+  0xc0,
+  0x62,
+  0xce,
+  0x68,
+  0xde,
+  0xc8,
+  0xf3,
+  0x2f,
+  0xb7,
+  0xae,
+  0xdb,
+  0xbc,
+  0x37,
+  0x8e,
+  0x7c,
+  0x3f,
+};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch0600050D_Enc.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch0600050D_Enc.c
new file mode 100644
index 0000000000..5e5cf04ba5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch0600050D_Enc.c
@@ -0,0 +1,2675 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD F15Or Microcode patch.
+ *
+ * F15Or Microcode Patch rev 0600050D for 6011 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55872 $   @e \$Date: 2011-07-01 09:09:22 -0600 (Fri, 01 Jul 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+UCODE_VS_FLAG (0600050D_Enc)
+
+// Encrypt Patch code 0600050D for 6011 and equivalent
+
+CONST UINT8 ROMDATA CpuF15OrMicrocodePatch0600050D_Enc [IDS_PAD_4K] =
+{
+  0x11,
+  0x20,
+  0x27,
+  0x06,
+  0x0d,
+  0x05,
+  0x00,
+  0x06,
+  0x02,
+  0x80,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x11,
+  0x60,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x5b,
+  0x94,
+  0xa0,
+  0x0d,
+  0x78,
+  0xaf,
+  0xb3,
+  0xa7,
+  0x4b,
+  0xbb,
+  0x6b,
+  0x18,
+  0x7e,
+  0xe0,
+  0x91,
+  0x2a,
+  0x6e,
+  0xb5,
+  0x40,
+  0x6e,
+  0x39,
+  0x62,
+  0x3b,
+  0x83,
+  0xe9,
+  0x47,
+  0x50,
+  0xba,
+  0xb5,
+  0x7d,
+  0x40,
+  0x26,
+  0xf6,
+  0x46,
+  0xbc,
+  0x45,
+  0x3d,
+  0xd6,
+  0xa3,
+  0xa8,
+  0x94,
+  0x33,
+  0xb9,
+  0xd3,
+  0xa0,
+  0xb5,
+  0x50,
+  0xe2,
+  0x6d,
+  0x90,
+  0x1e,
+  0xc9,
+  0x30,
+  0x91,
+  0x70,
+  0x3d,
+  0xef,
+  0x48,
+  0xc1,
+  0xc5,
+  0x21,
+  0x73,
+  0x94,
+  0x26,
+  0xce,
+  0x40,
+  0xb6,
+  0x24,
+  0x2c,
+  0x33,
+  0xf9,
+  0x64,
+  0x2f,
+  0xf7,
+  0x6f,
+  0xf0,
+  0x38,
+  0x02,
+  0x2e,
+  0x4d,
+  0xfd,
+  0x82,
+  0x64,
+  0x50,
+  0x6d,
+  0xf0,
+  0xb5,
+  0xed,
+  0xff,
+  0xb1,
+  0xb9,
+  0x8a,
+  0xbc,
+  0xab,
+  0xf9,
+  0x2c,
+  0x9c,
+  0x99,
+  0x36,
+  0x79,
+  0x07,
+  0x80,
+  0xf8,
+  0xa7,
+  0x68,
+  0xdd,
+  0x06,
+  0xbe,
+  0xd7,
+  0xa3,
+  0xe0,
+  0x74,
+  0x25,
+  0x9f,
+  0xe5,
+  0x9d,
+  0xff,
+  0xee,
+  0x08,
+  0x44,
+  0x78,
+  0x16,
+  0x3f,
+  0xbe,
+  0xa9,
+  0xf2,
+  0xb1,
+  0xd1,
+  0x01,
+  0x20,
+  0x8f,
+  0xa7,
+  0x82,
+  0x75,
+  0x96,
+  0xed,
+  0xbe,
+  0x6f,
+  0xf4,
+  0x76,
+  0x4b,
+  0xc5,
+  0x87,
+  0x72,
+  0xde,
+  0x21,
+  0x9f,
+  0x6c,
+  0xa3,
+  0x9f,
+  0x37,
+  0x9a,
+  0xf0,
+  0xbb,
+  0x6c,
+  0x9b,
+  0xeb,
+  0x9d,
+  0xeb,
+  0xf9,
+  0xe2,
+  0x40,
+  0x1f,
+  0x3b,
+  0x7f,
+  0x8a,
+  0x96,
+  0x58,
+  0x1f,
+  0x80,
+  0x75,
+  0x19,
+  0xb1,
+  0xdb,
+  0xcc,
+  0xbe,
+  0x6b,
+  0x03,
+  0x21,
+  0xf3,
+  0x30,
+  0x50,
+  0xe7,
+  0x39,
+  0x59,
+  0x9a,
+  0xf5,
+  0x58,
+  0x6b,
+  0x02,
+  0xac,
+  0x96,
+  0xbc,
+  0x0e,
+  0x79,
+  0x99,
+  0x6c,
+  0xda,
+  0x46,
+  0xcf,
+  0x47,
+  0xb4,
+  0x54,
+  0x7d,
+  0x83,
+  0x95,
+  0x6e,
+  0x2d,
+  0x76,
+  0x44,
+  0x59,
+  0x1e,
+  0x86,
+  0x08,
+  0xcb,
+  0x82,
+  0x4d,
+  0x83,
+  0x85,
+  0x24,
+  0xe5,
+  0x05,
+  0x3b,
+  0x31,
+  0x3d,
+  0x19,
+  0x10,
+  0x49,
+  0xb9,
+  0xa0,
+  0xd2,
+  0x97,
+  0x46,
+  0x19,
+  0x2b,
+  0xc7,
+  0x3f,
+  0x01,
+  0xda,
+  0x36,
+  0x5c,
+  0x50,
+  0xc6,
+  0xc5,
+  0x75,
+  0x2d,
+  0x1b,
+  0x67,
+  0x87,
+  0x37,
+  0xae,
+  0x97,
+  0x69,
+  0xea,
+  0x0b,
+  0x03,
+  0x3e,
+  0x98,
+  0x93,
+  0x94,
+  0xa7,
+  0x56,
+  0x26,
+  0x1b,
+  0x1f,
+  0xb2,
+  0x41,
+  0x02,
+  0x6d,
+  0xd5,
+  0xcb,
+  0xac,
+  0x73,
+  0x2f,
+  0xcb,
+  0xf9,
+  0x49,
+  0xbb,
+  0xa6,
+  0x65,
+  0x6b,
+  0x97,
+  0x2c,
+  0xd6,
+  0x71,
+  0xd8,
+  0xeb,
+  0xbb,
+  0x77,
+  0x7f,
+  0xfe,
+  0x7c,
+  0xc9,
+  0x95,
+  0xbd,
+  0xe0,
+  0x0d,
+  0x7c,
+  0xea,
+  0x13,
+  0x8d,
+  0xb4,
+  0xbd,
+  0x9f,
+  0xa6,
+  0x70,
+  0x9a,
+  0x72,
+  0x67,
+  0x21,
+  0xe5,
+  0xf5,
+  0xb9,
+  0x92,
+  0x18,
+  0xe6,
+  0xd2,
+  0x48,
+  0xfb,
+  0x9b,
+  0xae,
+  0xd9,
+  0x2b,
+  0x78,
+  0x42,
+  0xff,
+  0x84,
+  0x51,
+  0x89,
+  0x5c,
+  0xab,
+  0x46,
+  0x8c,
+  0x77,
+  0x11,
+  0x45,
+  0x43,
+  0x7d,
+  0x17,
+  0x2c,
+  0x10,
+  0xf6,
+  0x81,
+  0x28,
+  0x1b,
+  0xc4,
+  0x4b,
+  0x21,
+  0xe1,
+  0x75,
+  0x22,
+  0x80,
+  0x74,
+  0xe7,
+  0x2b,
+  0x7b,
+  0x09,
+  0xf6,
+  0x64,
+  0x05,
+  0x24,
+  0x87,
+  0x4a,
+  0xe5,
+  0xa5,
+  0x94,
+  0x96,
+  0x1d,
+  0x16,
+  0x2d,
+  0xec,
+  0x07,
+  0x55,
+  0x5e,
+  0x0c,
+  0xd5,
+  0x89,
+  0xb1,
+  0xd5,
+  0x85,
+  0xe9,
+  0x9d,
+  0x85,
+  0x68,
+  0x3a,
+  0x9d,
+  0xc0,
+  0x30,
+  0xc0,
+  0xcf,
+  0x44,
+  0xe0,
+  0x3a,
+  0x7f,
+  0x4c,
+  0xc7,
+  0x9c,
+  0x3e,
+  0x1a,
+  0x0f,
+  0xfc,
+  0x3e,
+  0x46,
+  0xd3,
+  0x88,
+  0x93,
+  0x83,
+  0x39,
+  0x8e,
+  0x9a,
+  0xd1,
+  0xe3,
+  0x98,
+  0xfd,
+  0x79,
+  0xeb,
+  0x3d,
+  0xe4,
+  0x3f,
+  0xc7,
+  0x49,
+  0xd9,
+  0xec,
+  0xe5,
+  0x25,
+  0x94,
+  0xb0,
+  0x46,
+  0xaf,
+  0x04,
+  0x0b,
+  0x66,
+  0x9e,
+  0x01,
+  0x1c,
+  0xe2,
+  0xd9,
+  0xf2,
+  0xf6,
+  0x77,
+  0x97,
+  0x5a,
+  0xe2,
+  0xba,
+  0x40,
+  0x82,
+  0x33,
+  0x6a,
+  0x6f,
+  0x92,
+  0xae,
+  0xa6,
+  0x03,
+  0xda,
+  0xc2,
+  0xc5,
+  0x4c,
+  0xfe,
+  0x19,
+  0x52,
+  0xde,
+  0xea,
+  0x35,
+  0xd9,
+  0x46,
+  0xd9,
+  0x90,
+  0xfe,
+  0x72,
+  0x9e,
+  0xfd,
+  0x22,
+  0x9e,
+  0x2b,
+  0xca,
+  0xa2,
+  0x98,
+  0x25,
+  0x74,
+  0x4b,
+  0x84,
+  0x2a,
+  0xde,
+  0xd6,
+  0x2d,
+  0x12,
+  0xb0,
+  0xba,
+  0xd8,
+  0xc5,
+  0xe9,
+  0x6e,
+  0x24,
+  0x1f,
+  0x53,
+  0xee,
+  0x2a,
+  0x26,
+  0xe1,
+  0x1f,
+  0xd6,
+  0x3d,
+  0xcd,
+  0xc9,
+  0xd5,
+  0xde,
+  0xdc,
+  0x7d,
+  0x30,
+  0x81,
+  0xdc,
+  0x3d,
+  0x62,
+  0x7a,
+  0xa4,
+  0x9c,
+  0x52,
+  0x2e,
+  0xb7,
+  0xfa,
+  0x9c,
+  0x9b,
+  0x4d,
+  0x32,
+  0xb2,
+  0xbd,
+  0xdf,
+  0x21,
+  0xa0,
+  0x0b,
+  0x09,
+  0x44,
+  0xc5,
+  0xea,
+  0x7a,
+  0xb2,
+  0x3b,
+  0x75,
+  0x74,
+  0x4c,
+  0x5e,
+  0x77,
+  0x88,
+  0xfe,
+  0x68,
+  0x9d,
+  0x64,
+  0x24,
+  0x18,
+  0x74,
+  0x8d,
+  0xf7,
+  0x92,
+  0xf6,
+  0xd9,
+  0x92,
+  0x85,
+  0xce,
+  0x3f,
+  0xf7,
+  0x00,
+  0xdc,
+  0x2c,
+  0x90,
+  0xfc,
+  0x4c,
+  0xc0,
+  0xf5,
+  0xf3,
+  0x75,
+  0x55,
+  0x94,
+  0x33,
+  0xd8,
+  0xdc,
+  0x3e,
+  0x93,
+  0x66,
+  0xb7,
+  0xee,
+  0x64,
+  0x29,
+  0xb5,
+  0xf8,
+  0x50,
+  0xbf,
+  0x08,
+  0xa0,
+  0xfd,
+  0x2c,
+  0x12,
+  0xa7,
+  0x45,
+  0xae,
+  0x45,
+  0xaf,
+  0x26,
+  0x88,
+  0xe1,
+  0x6b,
+  0xa5,
+  0x75,
+  0xac,
+  0xf0,
+  0x61,
+  0x6d,
+  0x09,
+  0x95,
+  0xba,
+  0xc4,
+  0x12,
+  0xfe,
+  0x0d,
+  0xf5,
+  0x32,
+  0xd4,
+  0xde,
+  0xa8,
+  0x29,
+  0x0d,
+  0x69,
+  0xda,
+  0x37,
+  0x0e,
+  0x2d,
+  0xdd,
+  0x59,
+  0xff,
+  0x6b,
+  0x42,
+  0x76,
+  0x11,
+  0x9f,
+  0x39,
+  0x30,
+  0x84,
+  0xf5,
+  0xb8,
+  0xd7,
+  0x02,
+  0x82,
+  0xf9,
+  0x0b,
+  0xcf,
+  0x4e,
+  0xb6,
+  0x95,
+  0x8f,
+  0xab,
+  0x21,
+  0xe7,
+  0x69,
+  0x1d,
+  0xbb,
+  0x96,
+  0x77,
+  0xfd,
+  0xc9,
+  0x30,
+  0x05,
+  0xa8,
+  0x8c,
+  0x16,
+  0xd8,
+  0xf9,
+  0xe3,
+  0x75,
+  0xe8,
+  0x87,
+  0x8e,
+  0xfc,
+  0x8e,
+  0xe5,
+  0x32,
+  0x86,
+  0x57,
+  0x85,
+  0x64,
+  0xfc,
+  0x78,
+  0xcd,
+  0x24,
+  0x32,
+  0xe8,
+  0xa4,
+  0xd3,
+  0x5f,
+  0x87,
+  0x5a,
+  0x18,
+  0xcf,
+  0x4b,
+  0x61,
+  0x58,
+  0x0d,
+  0xde,
+  0x2d,
+  0xa3,
+  0x36,
+  0x46,
+  0xd0,
+  0x05,
+  0x06,
+  0x86,
+  0x23,
+  0xcf,
+  0xb5,
+  0x2b,
+  0x12,
+  0xb0,
+  0x3b,
+  0x92,
+  0x36,
+  0xbb,
+  0x71,
+  0xcf,
+  0x05,
+  0x9c,
+  0x68,
+  0xf8,
+  0x17,
+  0x2b,
+  0x3c,
+  0xb4,
+  0x30,
+  0xf1,
+  0xad,
+  0x21,
+  0x05,
+  0xf1,
+  0x8f,
+  0x09,
+  0xbb,
+  0x71,
+  0x95,
+  0xf8,
+  0x5b,
+  0x2e,
+  0x78,
+  0x02,
+  0xdd,
+  0xcf,
+  0x20,
+  0x01,
+  0x45,
+  0xf1,
+  0xf0,
+  0xc3,
+  0x08,
+  0x56,
+  0xfe,
+  0x00,
+  0x3a,
+  0x2f,
+  0xc7,
+  0xa1,
+  0x92,
+  0x37,
+  0x47,
+  0xf7,
+  0x70,
+  0xbb,
+  0xc2,
+  0x1f,
+  0x4b,
+  0x30,
+  0x82,
+  0xf1,
+  0xa8,
+  0x56,
+  0x53,
+  0x21,
+  0x21,
+  0x24,
+  0xfb,
+  0x57,
+  0x13,
+  0x92,
+  0x2c,
+  0x86,
+  0x1f,
+  0xdb,
+  0x5d,
+  0xa0,
+  0x7c,
+  0xb2,
+  0xc4,
+  0xea,
+  0x38,
+  0xed,
+  0xe6,
+  0x10,
+  0xf4,
+  0x8a,
+  0xca,
+  0xba,
+  0x4e,
+  0x99,
+  0x3e,
+  0x40,
+  0x49,
+  0x84,
+  0xe5,
+  0xc3,
+  0xda,
+  0x36,
+  0xbd,
+  0x5e,
+  0xc6,
+  0x40,
+  0x6b,
+  0x06,
+  0x81,
+  0x40,
+  0xe7,
+  0x3d,
+  0x50,
+  0x91,
+  0x5a,
+  0x7f,
+  0x80,
+  0x52,
+  0xec,
+  0x33,
+  0xaf,
+  0xb9,
+  0xa2,
+  0x57,
+  0x3d,
+  0xe6,
+  0x00,
+  0xc2,
+  0x58,
+  0x16,
+  0xcb,
+  0xdd,
+  0xe4,
+  0xbc,
+  0xe6,
+  0xbf,
+  0x1c,
+  0x26,
+  0x33,
+  0xec,
+  0xa3,
+  0x3b,
+  0x25,
+  0xee,
+  0x80,
+  0xf3,
+  0xd2,
+  0x65,
+  0x72,
+  0x12,
+  0xe7,
+  0x2b,
+  0xbc,
+  0xa6,
+  0x05,
+  0x0f,
+  0x72,
+  0x42,
+  0xca,
+  0xe0,
+  0xe7,
+  0x81,
+  0xde,
+  0x05,
+  0x2f,
+  0x1f,
+  0x2b,
+  0xcc,
+  0xe5,
+  0xc1,
+  0x62,
+  0x5e,
+  0x24,
+  0x92,
+  0x94,
+  0x4a,
+  0x99,
+  0x7a,
+  0x21,
+  0x8a,
+  0x2f,
+  0xa3,
+  0x48,
+  0x5b,
+  0xa8,
+  0xa1,
+  0x95,
+  0x5c,
+  0x5c,
+  0xe5,
+  0x74,
+  0x78,
+  0xdd,
+  0x05,
+  0xf4,
+  0x46,
+  0x44,
+  0x0c,
+  0xcb,
+  0x2f,
+  0xf5,
+  0xc6,
+  0xb3,
+  0x3f,
+  0x1e,
+  0x8e,
+  0xc9,
+  0x34,
+  0xe2,
+  0xa7,
+  0x31,
+  0xa1,
+  0x08,
+  0x44,
+  0x86,
+  0x01,
+  0xfc,
+  0x46,
+  0xb9,
+  0x44,
+  0x86,
+  0xc2,
+  0x10,
+  0x31,
+  0xcc,
+  0x28,
+  0x55,
+  0x9e,
+  0xad,
+  0xe3,
+  0x0d,
+  0x0e,
+  0x05,
+  0xa0,
+  0x2b,
+  0x27,
+  0x77,
+  0x8e,
+  0x0f,
+  0xd2,
+  0x71,
+  0xfc,
+  0x0a,
+  0x5e,
+  0x06,
+  0x37,
+  0x3f,
+  0x2c,
+  0xa5,
+  0x77,
+  0xc6,
+  0x24,
+  0x10,
+  0xfe,
+  0xbb,
+  0x70,
+  0xbd,
+  0xe4,
+  0xb8,
+  0xf4,
+  0x1b,
+  0x2b,
+  0x5a,
+  0xcf,
+  0x69,
+  0xbb,
+  0xb5,
+  0x26,
+  0x69,
+  0x0c,
+  0xc2,
+  0x70,
+  0x3f,
+  0xef,
+  0xe9,
+  0x83,
+  0x86,
+  0x8c,
+  0x85,
+  0xa3,
+  0x0d,
+  0xa1,
+  0xdf,
+  0x58,
+  0x19,
+  0x86,
+  0xcd,
+  0xc0,
+  0xc4,
+  0x84,
+  0xca,
+  0x6f,
+  0x77,
+  0x54,
+  0x69,
+  0x92,
+  0xf7,
+  0xe9,
+  0x48,
+  0x63,
+  0xb9,
+  0x3d,
+  0x96,
+  0x7a,
+  0x42,
+  0x4b,
+  0x4a,
+  0xf3,
+  0x3e,
+  0x2a,
+  0xa9,
+  0x62,
+  0x25,
+  0x42,
+  0x35,
+  0xbe,
+  0xde,
+  0xa1,
+  0x34,
+  0x9b,
+  0x94,
+  0xdd,
+  0xf8,
+  0x18,
+  0x4d,
+  0x04,
+  0x9a,
+  0x27,
+  0xf2,
+  0xc7,
+  0x41,
+  0xa3,
+  0x09,
+  0x9e,
+  0x16,
+  0xe3,
+  0x02,
+  0xdb,
+  0x81,
+  0xfb,
+  0xd2,
+  0x88,
+  0xf6,
+  0xaf,
+  0x95,
+  0x19,
+  0xfa,
+  0x52,
+  0x6a,
+  0xdc,
+  0x36,
+  0xdd,
+  0xc7,
+  0xb7,
+  0xae,
+  0xe8,
+  0xb6,
+  0x94,
+  0x86,
+  0x5d,
+  0x4e,
+  0xcd,
+  0x82,
+  0x87,
+  0xa1,
+  0x58,
+  0x75,
+  0x3c,
+  0x73,
+  0x82,
+  0xbe,
+  0x94,
+  0xba,
+  0xa4,
+  0xc7,
+  0x92,
+  0xfc,
+  0xa5,
+  0x3b,
+  0x78,
+  0x17,
+  0xf5,
+  0x67,
+  0x5e,
+  0x97,
+  0xbe,
+  0x7c,
+  0x28,
+  0xac,
+  0x50,
+  0x25,
+  0xe3,
+  0xf6,
+  0x75,
+  0x5e,
+  0x1a,
+  0xef,
+  0xd3,
+  0xba,
+  0x39,
+  0x03,
+  0xe6,
+  0xb9,
+  0x62,
+  0x8e,
+  0x6f,
+  0xdf,
+  0xa7,
+  0x8d,
+  0x5c,
+  0xbf,
+  0xd3,
+  0x7b,
+  0x88,
+  0x7f,
+  0xcf,
+  0x93,
+  0x26,
+  0xa4,
+  0xee,
+  0xac,
+  0x5a,
+  0xa6,
+  0x44,
+  0x4c,
+  0xbb,
+  0x90,
+  0x9f,
+  0xc6,
+  0xa9,
+  0x2b,
+  0x05,
+  0x91,
+  0xe5,
+  0xbe,
+  0xd3,
+  0xc3,
+  0xa2,
+  0x13,
+  0x70,
+  0xd5,
+  0x46,
+  0x3b,
+  0x7f,
+  0xf1,
+  0xfa,
+  0x50,
+  0x6c,
+  0xec,
+  0x35,
+  0xfc,
+  0xfb,
+  0x69,
+  0x0e,
+  0x86,
+  0x04,
+  0xb6,
+  0xb1,
+  0x1e,
+  0x58,
+  0x63,
+  0x35,
+  0x8e,
+  0x14,
+  0x37,
+  0xae,
+  0x2c,
+  0x2d,
+  0xcd,
+  0x89,
+  0x0d,
+  0x45,
+  0xbd,
+  0x58,
+  0xa9,
+  0xfd,
+  0x60,
+  0x1d,
+  0x4c,
+  0xab,
+  0x60,
+  0xff,
+  0x25,
+  0x6a,
+  0xd0,
+  0xd3,
+  0x54,
+  0x54,
+  0xd3,
+  0x36,
+  0xd5,
+  0x80,
+  0x34,
+  0x64,
+  0xf5,
+  0x58,
+  0x14,
+  0xe8,
+  0x89,
+  0xbe,
+  0xd4,
+  0xe9,
+  0x90,
+  0x72,
+  0xdc,
+  0x25,
+  0x66,
+  0x89,
+  0x7a,
+  0xc3,
+  0xcd,
+  0xd6,
+  0x88,
+  0xac,
+  0xb8,
+  0xbb,
+  0x54,
+  0xf0,
+  0x7e,
+  0x4d,
+  0x75,
+  0xfe,
+  0x19,
+  0x8d,
+  0x51,
+  0xae,
+  0x00,
+  0x8a,
+  0x43,
+  0x00,
+  0x92,
+  0x0d,
+  0xd0,
+  0x15,
+  0x47,
+  0xef,
+  0x61,
+  0x3e,
+  0x68,
+  0xd3,
+  0xa7,
+  0xea,
+  0x69,
+  0x91,
+  0xc4,
+  0xf8,
+  0x74,
+  0x41,
+  0xdd,
+  0xcc,
+  0x2d,
+  0x5c,
+  0x27,
+  0x58,
+  0x27,
+  0x45,
+  0xa8,
+  0xd9,
+  0xfd,
+  0x21,
+  0x73,
+  0x4e,
+  0xea,
+  0xc6,
+  0x9d,
+  0x47,
+  0x4d,
+  0x44,
+  0x78,
+  0xfb,
+  0x40,
+  0x29,
+  0x3e,
+  0x65,
+  0xde,
+  0x9b,
+  0x40,
+  0x3b,
+  0xc5,
+  0x38,
+  0x23,
+  0x85,
+  0x97,
+  0x09,
+  0xe8,
+  0xd7,
+  0x7f,
+  0x9e,
+  0x5c,
+  0xb1,
+  0x17,
+  0xa8,
+  0xaf,
+  0xc6,
+  0x48,
+  0x53,
+  0x4f,
+  0x8a,
+  0x7f,
+  0xdc,
+  0xe8,
+  0x5e,
+  0x03,
+  0xd6,
+  0x9c,
+  0x04,
+  0xb2,
+  0x4f,
+  0x3a,
+  0x6a,
+  0x08,
+  0xf3,
+  0x3a,
+  0xb9,
+  0xa4,
+  0x6b,
+  0x8b,
+  0xe1,
+  0x5b,
+  0x3f,
+  0xb4,
+  0x14,
+  0x10,
+  0xdb,
+  0x11,
+  0xbf,
+  0x21,
+  0xfc,
+  0xd7,
+  0xc4,
+  0x02,
+  0x95,
+  0x84,
+  0x7d,
+  0xab,
+  0xce,
+  0x6f,
+  0x5d,
+  0xc3,
+  0xb4,
+  0xcf,
+  0x27,
+  0x1b,
+  0xca,
+  0xc6,
+  0xa1,
+  0x60,
+  0x19,
+  0x75,
+  0x17,
+  0x48,
+  0x9b,
+  0x25,
+  0x6f,
+  0x2a,
+  0xbb,
+  0x12,
+  0x51,
+  0xc7,
+  0xdd,
+  0xfa,
+  0xba,
+  0xe7,
+  0x12,
+  0x54,
+  0xdd,
+  0xed,
+  0x1c,
+  0xd2,
+  0x10,
+  0xab,
+  0x79,
+  0xe3,
+  0xc6,
+  0xaf,
+  0x42,
+  0xf1,
+  0x67,
+  0xea,
+  0xe7,
+  0x6b,
+  0x52,
+  0xe9,
+  0xf4,
+  0xa2,
+  0xdb,
+  0xe1,
+  0xe8,
+  0x3b,
+  0x6e,
+  0x0c,
+  0xf7,
+  0x05,
+  0x24,
+  0xe4,
+  0x97,
+  0x54,
+  0x39,
+  0x38,
+  0x79,
+  0x65,
+  0x8b,
+  0xb4,
+  0x8b,
+  0x01,
+  0x16,
+  0x6e,
+  0x9b,
+  0xa2,
+  0x6d,
+  0xde,
+  0xb6,
+  0x09,
+  0x69,
+  0xc5,
+  0xf5,
+  0xe1,
+  0x92,
+  0x29,
+  0x29,
+  0x36,
+  0xa7,
+  0x1e,
+  0x53,
+  0x62,
+  0xda,
+  0x25,
+  0x93,
+  0x55,
+  0x6d,
+  0x92,
+  0x50,
+  0x5b,
+  0x55,
+  0x6b,
+  0x57,
+  0xa0,
+  0x3d,
+  0x61,
+  0x2d,
+  0x09,
+  0x41,
+  0x3e,
+  0xe7,
+  0x1c,
+  0x51,
+  0x29,
+  0x80,
+  0x8b,
+  0x60,
+  0x6c,
+  0x63,
+  0x73,
+  0x5c,
+  0x36,
+  0x63,
+  0xee,
+  0xe8,
+  0x5a,
+  0x30,
+  0x01,
+  0xec,
+  0x7f,
+  0xda,
+  0x0d,
+  0x26,
+  0x78,
+  0x90,
+  0x46,
+  0x11,
+  0x45,
+  0xc1,
+  0x61,
+  0x33,
+  0xe7,
+  0xd2,
+  0x91,
+  0x40,
+  0x5f,
+  0xdb,
+  0xe4,
+  0xb4,
+  0x32,
+  0xb7,
+  0x33,
+  0xdd,
+  0xcf,
+  0x06,
+  0x23,
+  0x10,
+  0x1e,
+  0xa8,
+  0x17,
+  0x78,
+  0x6f,
+  0x93,
+  0x9b,
+  0xb2,
+  0x56,
+  0x91,
+  0x00,
+  0xd4,
+  0xf9,
+  0x57,
+  0x5d,
+  0xf3,
+  0xd2,
+  0x69,
+  0x3a,
+  0x01,
+  0x80,
+  0x9d,
+  0xca,
+  0x61,
+  0x98,
+  0x31,
+  0x24,
+  0xfc,
+  0x12,
+  0x5b,
+  0x50,
+  0x1e,
+  0x2b,
+  0x00,
+  0xa0,
+  0x78,
+  0x2f,
+  0x60,
+  0x7d,
+  0xff,
+  0x00,
+  0x04,
+  0x91,
+  0x15,
+  0xcc,
+  0xea,
+  0xc0,
+  0xb0,
+  0x22,
+  0xa5,
+  0xbc,
+  0x76,
+  0xcf,
+  0x32,
+  0xaf,
+  0x83,
+  0x84,
+  0x38,
+  0x72,
+  0x9e,
+  0xa8,
+  0xae,
+  0x38,
+  0xf1,
+  0xbd,
+  0x50,
+  0x3a,
+  0xaa,
+  0x26,
+  0x74,
+  0x07,
+  0x58,
+  0x34,
+  0xa1,
+  0x08,
+  0x6d,
+  0x3d,
+  0x03,
+  0xcf,
+  0x85,
+  0xca,
+  0x71,
+  0x23,
+  0x5c,
+  0xf7,
+  0x08,
+  0xa8,
+  0x77,
+  0x0d,
+  0x82,
+  0x46,
+  0x82,
+  0xe5,
+  0x4e,
+  0xd2,
+  0x42,
+  0x4b,
+  0xff,
+  0x12,
+  0x2a,
+  0x9f,
+  0x84,
+  0xa9,
+  0xa2,
+  0xda,
+  0x08,
+  0x63,
+  0xb3,
+  0xfd,
+  0xb8,
+  0x07,
+  0x68,
+  0x6e,
+  0x2f,
+  0x72,
+  0x5a,
+  0xec,
+  0x0c,
+  0x4e,
+  0xd6,
+  0xc5,
+  0xa0,
+  0x7d,
+  0x5a,
+  0xa7,
+  0x25,
+  0xe0,
+  0x41,
+  0xb7,
+  0x83,
+  0xd7,
+  0xa9,
+  0x0e,
+  0xb9,
+  0x20,
+  0x48,
+  0xee,
+  0x59,
+  0xb4,
+  0xea,
+  0x81,
+  0xd8,
+  0x80,
+  0x2a,
+  0x33,
+  0xc2,
+  0xb3,
+  0xee,
+  0x6b,
+  0x32,
+  0x4c,
+  0x67,
+  0x2f,
+  0xde,
+  0x4f,
+  0xf2,
+  0xa7,
+  0xf6,
+  0x86,
+  0xd9,
+  0xbe,
+  0x8f,
+  0x30,
+  0x5e,
+  0x44,
+  0x7c,
+  0x81,
+  0x9d,
+  0x55,
+  0xb2,
+  0xbe,
+  0xb9,
+  0xa6,
+  0x12,
+  0x0f,
+  0xa6,
+  0xd4,
+  0xae,
+  0xe9,
+  0x8d,
+  0x70,
+  0x6d,
+  0x71,
+  0xb2,
+  0xb8,
+  0x62,
+  0x52,
+  0x3c,
+  0xda,
+  0x6c,
+  0x1f,
+  0xf0,
+  0xc6,
+  0x96,
+  0x99,
+  0x00,
+  0x93,
+  0x74,
+  0x62,
+  0xc0,
+  0xc9,
+  0x75,
+  0x9f,
+  0x8d,
+  0x1a,
+  0x6c,
+  0x0f,
+  0x60,
+  0x97,
+  0x62,
+  0x9f,
+  0x21,
+  0xb0,
+  0x32,
+  0x6d,
+  0x02,
+  0x94,
+  0x8d,
+  0x7d,
+  0x37,
+  0x85,
+  0xce,
+  0x51,
+  0xba,
+  0x09,
+  0xf9,
+  0xe8,
+  0x05,
+  0xed,
+  0xeb,
+  0xab,
+  0xe9,
+  0x43,
+  0x19,
+  0x49,
+  0x92,
+  0x47,
+  0xfa,
+  0xfc,
+  0xcc,
+  0xe8,
+  0xc7,
+  0xf1,
+  0x00,
+  0xdf,
+  0x4f,
+  0xb7,
+  0x20,
+  0x93,
+  0x3a,
+  0xe1,
+  0x48,
+  0x01,
+  0x0e,
+  0x22,
+  0xcb,
+  0x84,
+  0x6b,
+  0x41,
+  0x47,
+  0xa7,
+  0x56,
+  0x5d,
+  0x2b,
+  0xfa,
+  0x40,
+  0x9a,
+  0x5a,
+  0x49,
+  0x8e,
+  0x3c,
+  0xda,
+  0x01,
+  0xf5,
+  0x85,
+  0x70,
+  0x27,
+  0x6d,
+  0xcb,
+  0x3b,
+  0x6e,
+  0x8a,
+  0x11,
+  0xc8,
+  0x11,
+  0x50,
+  0x1e,
+  0xe3,
+  0x92,
+  0x8c,
+  0x95,
+  0xb9,
+  0xc0,
+  0xcf,
+  0x78,
+  0x76,
+  0xa3,
+  0xbd,
+  0x1d,
+  0x12,
+  0xf6,
+  0x42,
+  0x9c,
+  0xac,
+  0xe2,
+  0x26,
+  0x46,
+  0xf2,
+  0x0b,
+  0xeb,
+  0x11,
+  0xfd,
+  0xd5,
+  0x16,
+  0x04,
+  0x37,
+  0x10,
+  0xf4,
+  0xbf,
+  0xca,
+  0xa7,
+  0xad,
+  0xa1,
+  0x82,
+  0x3e,
+  0xfb,
+  0xf2,
+  0x5b,
+  0xfc,
+  0xfd,
+  0x96,
+  0x57,
+  0x15,
+  0x90,
+  0x6b,
+  0xc2,
+  0x84,
+  0xc0,
+  0x98,
+  0x37,
+  0xaf,
+  0xa2,
+  0x32,
+  0x3a,
+  0x05,
+  0x1d,
+  0xab,
+  0x6d,
+  0x2e,
+  0xe5,
+  0xda,
+  0xd7,
+  0x10,
+  0xfe,
+  0x1b,
+  0x36,
+  0xdd,
+  0x91,
+  0xdb,
+  0x90,
+  0xff,
+  0x0c,
+  0x1f,
+  0x85,
+  0x62,
+  0xb7,
+  0xe5,
+  0x0a,
+  0x14,
+  0x99,
+  0x60,
+  0x92,
+  0x5b,
+  0xc1,
+  0x03,
+  0xfc,
+  0x2a,
+  0x3f,
+  0x57,
+  0x1a,
+  0x6d,
+  0xe3,
+  0x51,
+  0x96,
+  0x71,
+  0x73,
+  0xeb,
+  0x42,
+  0x66,
+  0x30,
+  0x99,
+  0x3f,
+  0x2f,
+  0x0e,
+  0xe1,
+  0xb5,
+  0x16,
+  0x1d,
+  0x3e,
+  0x8e,
+  0x58,
+  0xc5,
+  0xf3,
+  0xc3,
+  0x22,
+  0xf2,
+  0xfe,
+  0x9e,
+  0x51,
+  0x34,
+  0xe1,
+  0x51,
+  0xc3,
+  0x66,
+  0x0f,
+  0x72,
+  0xfc,
+  0x41,
+  0x30,
+  0x47,
+  0xa0,
+  0xd2,
+  0xaf,
+  0x1c,
+  0x1b,
+  0x3e,
+  0xc3,
+  0x92,
+  0x57,
+  0x03,
+  0x5d,
+  0xf6,
+  0x71,
+  0x94,
+  0xdf,
+  0xfb,
+  0x6c,
+  0xd8,
+  0x34,
+  0xc9,
+  0x44,
+  0x1f,
+  0xa3,
+  0xfc,
+  0x16,
+  0x4e,
+  0x78,
+  0xb6,
+  0xab,
+  0x32,
+  0x15,
+  0x0e,
+  0xd0,
+  0xfa,
+  0x85,
+  0xc6,
+  0x42,
+  0xf9,
+  0x83,
+  0x1a,
+  0xc1,
+  0x4d,
+  0xd7,
+  0x25,
+  0x4c,
+  0x3c,
+  0x48,
+  0x52,
+  0xa0,
+  0x4e,
+  0xd3,
+  0x7e,
+  0x2f,
+  0x22,
+  0x94,
+  0x07,
+  0xfb,
+  0x61,
+  0x04,
+  0x7f,
+  0x7c,
+  0xc6,
+  0x66,
+  0x2d,
+  0x0a,
+  0xb4,
+  0x93,
+  0xf1,
+  0xe3,
+  0xb3,
+  0x23,
+  0x77,
+  0x06,
+  0xaa,
+  0x3d,
+  0x82,
+  0xec,
+  0x4d,
+  0xdd,
+  0x18,
+  0xf7,
+  0x26,
+  0xc2,
+  0xf0,
+  0x7b,
+  0x4e,
+  0xb8,
+  0x0a,
+  0x4e,
+  0x09,
+  0xec,
+  0x1d,
+  0x38,
+  0xcb,
+  0xaf,
+  0xef,
+  0xda,
+  0xda,
+  0x9b,
+  0x17,
+  0x39,
+  0xca,
+  0x07,
+  0xc4,
+  0xeb,
+  0xfd,
+  0xba,
+  0x0d,
+  0x10,
+  0xae,
+  0x6b,
+  0x8b,
+  0xde,
+  0xf2,
+  0xda,
+  0xde,
+  0x5f,
+  0xd6,
+  0xff,
+  0x79,
+  0xec,
+  0x60,
+  0xdd,
+  0x8f,
+  0x7b,
+  0x53,
+  0xb4,
+  0xe2,
+  0x98,
+  0xcf,
+  0xdf,
+  0xa2,
+  0x3e,
+  0xef,
+  0x81,
+  0x10,
+  0xf0,
+  0xf9,
+  0xa4,
+  0x17,
+  0x82,
+  0xb6,
+  0x27,
+  0xc7,
+  0xcf,
+  0x6f,
+  0x0a,
+  0x81,
+  0xef,
+  0x38,
+  0xd3,
+  0xd8,
+  0x9e,
+  0x38,
+  0xdf,
+  0xcc,
+  0x73,
+  0xec,
+  0x0b,
+  0xdc,
+  0x4e,
+  0xe1,
+  0x4c,
+  0x8b,
+  0x8d,
+  0x9a,
+  0x75,
+  0x79,
+  0x47,
+  0x00,
+  0xd4,
+  0x1c,
+  0x05,
+  0xd1,
+  0x82,
+  0xea,
+  0xc1,
+  0x49,
+  0x65,
+  0xf5,
+  0x38,
+  0xc6,
+  0x07,
+  0x49,
+  0xda,
+  0x2a,
+  0x1d,
+  0xe3,
+  0x8e,
+  0xba,
+  0x4d,
+  0xc5,
+  0x9e,
+  0x2a,
+  0x9f,
+  0x2c,
+  0xc1,
+  0x3f,
+  0x95,
+  0x4e,
+  0xc5,
+  0x72,
+  0x77,
+  0x1b,
+  0x10,
+  0x13,
+  0xb0,
+  0xbc,
+  0x2c,
+  0x0f,
+  0xbb,
+  0xd4,
+  0x50,
+  0x83,
+  0x76,
+  0xa4,
+  0xb9,
+  0x9c,
+  0xe9,
+  0x73,
+  0x61,
+  0xc8,
+  0x41,
+  0xf6,
+  0x52,
+  0xa5,
+  0x7b,
+  0xaf,
+  0x5c,
+  0x83,
+  0x23,
+  0x3b,
+  0xc8,
+  0x22,
+  0x6a,
+  0x4c,
+  0x24,
+  0xb3,
+  0x91,
+  0x1c,
+  0x86,
+  0xe3,
+  0x63,
+  0xa1,
+  0xc7,
+  0xb3,
+  0x1d,
+  0x8f,
+  0xf7,
+  0x75,
+  0x70,
+  0xaf,
+  0x41,
+  0x75,
+  0x1f,
+  0xf4,
+  0x31,
+  0xc7,
+  0x7b,
+  0xef,
+  0x02,
+  0x78,
+  0x0e,
+  0x40,
+  0x7d,
+  0xb5,
+  0x37,
+  0x5a,
+  0x5f,
+  0xcb,
+  0x18,
+  0x3f,
+  0xb2,
+  0x93,
+  0xdd,
+  0x1b,
+  0xd4,
+  0xe4,
+  0x4f,
+  0xd9,
+  0xa8,
+  0xa4,
+  0x20,
+  0x64,
+  0xd1,
+  0xc8,
+  0x12,
+  0x61,
+  0xd4,
+  0x97,
+  0xae,
+  0x10,
+  0x94,
+  0xdc,
+  0x39,
+  0x30,
+  0xf0,
+  0x60,
+  0x61,
+  0x91,
+  0xd2,
+  0xd4,
+  0x0f,
+  0x09,
+  0xd1,
+  0x65,
+  0xc9,
+  0xa9,
+  0xc6,
+  0xe9,
+  0x50,
+  0x0a,
+  0x36,
+  0xf0,
+  0x37,
+  0x2b,
+  0xc7,
+  0xf2,
+  0xc2,
+  0x21,
+  0x8c,
+  0x69,
+  0xb6,
+  0x67,
+  0xb9,
+  0x32,
+  0x71,
+  0x89,
+  0x1e,
+  0xe7,
+  0xd8,
+  0x02,
+  0xde,
+  0xb9,
+  0x43,
+  0x8f,
+  0xec,
+  0x7e,
+  0x41,
+  0x2a,
+  0xb4,
+  0xc5,
+  0x05,
+  0xa1,
+  0x75,
+  0x82,
+  0x53,
+  0x48,
+  0x1c,
+  0xed,
+  0x17,
+  0x35,
+  0x74,
+  0x61,
+  0x59,
+  0x0d,
+  0x2f,
+  0x19,
+  0x4e,
+  0x9a,
+  0x28,
+  0x9b,
+  0x99,
+  0x78,
+  0xed,
+  0xe6,
+  0x36,
+  0x35,
+  0x74,
+  0x75,
+  0x21,
+  0x5c,
+  0x83,
+  0x0a,
+  0x8d,
+  0x3f,
+  0xbe,
+  0xaf,
+  0x5c,
+  0x22,
+  0x8e,
+  0x8b,
+  0x99,
+  0x51,
+  0x7b,
+  0xde,
+  0x6d,
+  0x1a,
+  0xbd,
+  0xeb,
+  0x79,
+  0x48,
+  0x76,
+  0xdb,
+  0x3f,
+  0xbb,
+  0x85,
+  0x8a,
+  0xb9,
+  0xb0,
+  0x23,
+  0xb0,
+  0x40,
+  0x58,
+  0x5e,
+  0x6b,
+  0x79,
+  0xa1,
+  0xb1,
+  0x39,
+  0x51,
+  0x4b,
+  0xbf,
+  0x52,
+  0x5b,
+  0xc1,
+  0xbe,
+  0xba,
+  0x1c,
+  0xf7,
+  0x84,
+  0x39,
+  0x29,
+  0xd9,
+  0x9a,
+  0x0d,
+  0x8f,
+  0x6d,
+  0x11,
+  0xe2,
+  0x66,
+  0x88,
+  0x2e,
+  0xe0,
+  0x6c,
+  0x66,
+  0x12,
+  0xf1,
+  0xd5,
+  0x24,
+  0x60,
+  0xb4,
+  0x26,
+  0x4e,
+  0xc4,
+  0x01,
+  0x77,
+  0x77,
+  0x5a,
+  0x93,
+  0x29,
+  0x20,
+  0xfe,
+  0xe7,
+  0x29,
+  0xc5,
+  0xcb,
+  0x2d,
+  0x51,
+  0xac,
+  0x10,
+  0x61,
+  0x7a,
+  0xe4,
+  0x4b,
+  0xb6,
+  0x84,
+  0xc1,
+  0x1d,
+  0x3b,
+  0x0a,
+  0x82,
+  0x9c,
+  0x9d,
+  0x24,
+  0x8d,
+  0x5e,
+  0xc3,
+  0x6e,
+  0x05,
+  0x16,
+  0x74,
+  0x2f,
+  0x4c,
+  0xa4,
+  0xec,
+  0x73,
+  0x58,
+  0x2e,
+  0xb3,
+  0xa7,
+  0xaa,
+  0xee,
+  0xfd,
+  0x5d,
+  0xf9,
+  0x0d,
+  0x8f,
+  0x16,
+  0xf0,
+  0x46,
+  0x63,
+  0x09,
+  0xce,
+  0x16,
+  0x02,
+  0xc8,
+  0x62,
+  0x44,
+  0x46,
+  0x92,
+  0x57,
+  0xea,
+  0xe4,
+  0x8c,
+  0x3b,
+  0x39,
+  0xa9,
+  0x5f,
+  0xdb,
+  0xf2,
+  0x06,
+  0x04,
+  0x9c,
+  0x5b,
+  0xf7,
+  0x46,
+  0x2c,
+  0xbb,
+  0x03,
+  0xd6,
+  0x22,
+  0x00,
+  0xe6,
+  0xd2,
+  0x46,
+  0x3a,
+  0xc0,
+  0x1c,
+  0xdc,
+  0x2c,
+  0xaf,
+  0x2d,
+  0x15,
+  0x19,
+  0x0d,
+  0xa6,
+  0x99,
+  0x4d,
+  0x21,
+  0x5b,
+  0xe2,
+  0x47,
+  0x47,
+  0xea,
+  0xad,
+  0x5d,
+  0x02,
+  0x8f,
+  0x4c,
+  0xd7,
+  0x0e,
+  0xb5,
+  0xad,
+  0xf3,
+  0x93,
+  0xb8,
+  0x6e,
+  0x52,
+  0x9b,
+  0x2b,
+  0x4f,
+  0xdc,
+  0xff,
+  0xd4,
+  0xbb,
+  0xa6,
+  0xc6,
+  0x37,
+  0x37,
+  0x9d,
+  0x3d,
+  0xd7,
+  0x05,
+  0xad,
+  0xc0,
+  0xca,
+  0xea,
+  0xae,
+  0x7e,
+  0x09,
+  0x6c,
+  0x82,
+  0xab,
+  0x7f,
+  0x21,
+  0xab,
+  0xf0,
+  0x33,
+  0x87,
+  0xd9,
+  0x02,
+  0xc0,
+  0x04,
+  0x30,
+  0x2a,
+  0x63,
+  0xbe,
+  0x70,
+  0x8b,
+  0x8a,
+  0xb3,
+  0x7d,
+  0xb9,
+  0x6c,
+  0x02,
+  0x2a,
+  0x37,
+  0xa9,
+  0x65,
+  0x53,
+  0xd5,
+  0x1b,
+  0x09,
+  0x09,
+  0xc9,
+  0xe1,
+  0x3e,
+  0x38,
+  0xf2,
+  0x17,
+  0xba,
+  0x99,
+  0x65,
+  0x61,
+  0xb2,
+  0xfd,
+  0xbf,
+  0xc4,
+  0x25,
+  0xf0,
+  0x98,
+  0xec,
+  0xab,
+  0xad,
+  0x4d,
+};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch06000624_Enc.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch06000624_Enc.c
new file mode 100644
index 0000000000..3fc9637d99
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatch06000624_Enc.c
@@ -0,0 +1,2701 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD F15Or Microcode patch.
+ *
+ * F15Or Microcode Patch rev 06000624 for 6012 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 60770 $   @e \$Date: 2011-10-21 15:51:10 -0600 (Fri, 21 Oct 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright 2008 - 2012 ADVANCED MICRO DEVICES, INC.  All Rights Reserved.
+ *
+ * AMD is granting you permission to use this software (the Materials)
+ * pursuant to the terms and conditions of your Software License Agreement
+ * with AMD.  This header does *NOT* give you permission to use the Materials
+ * or any rights under AMD's intellectual property.  Your use of any portion
+ * of these Materials shall constitute your acceptance of those terms and
+ * conditions.  If you do not agree to the terms and conditions of the Software
+ * License Agreement, please do not use any portion of these Materials.
+ *
+ * CONFIDENTIALITY:  The Materials and all other information, identified as
+ * confidential and provided to you by AMD shall be kept confidential in
+ * accordance with the terms and conditions of the Software License Agreement.
+ *
+ * LIMITATION OF LIABILITY: THE MATERIALS AND ANY OTHER RELATED INFORMATION
+ * PROVIDED TO YOU BY AMD ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED
+ * WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
+ * MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY PARTICULAR PURPOSE,
+ * OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR USAGE OF TRADE.
+ * IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER
+ * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS
+ * INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF AMD'S NEGLIGENCE,
+ * GROSS NEGLIGENCE, THE USE OF OR INABILITY TO USE THE MATERIALS OR ANY OTHER
+ * RELATED INFORMATION PROVIDED TO YOU BY AMD, EVEN IF AMD HAS BEEN ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.  BECAUSE SOME JURISDICTIONS PROHIBIT THE
+ * EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES,
+ * THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
+ *
+ * AMD does not assume any responsibility for any errors which may appear in
+ * the Materials or any other related information provided to you by AMD, or
+ * result from use of the Materials or any related information.
+ *
+ * You agree that you will not reverse engineer or decompile the Materials.
+ *
+ * NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any
+ * further information, software, technical information, know-how, or show-how
+ * available to you.  Additionally, AMD retains the right to modify the
+ * Materials at any time, without notice, and is not obligated to provide such
+ * modified Materials to you.
+ *
+ * U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with
+ * "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is
+ * subject to the restrictions as set forth in FAR 52.227-14 and
+ * DFAR252.227-7013, et seq., or its successor.  Use of the Materials by the
+ * Government constitutes acknowledgement of AMD's proprietary rights in them.
+ *
+ * EXPORT ASSURANCE:  You agree and certify that neither the Materials, nor any
+ * direct product thereof will be exported directly or indirectly, into any
+ * country prohibited by the United States Export Administration Act and the
+ * regulations thereunder, without the required authorization from the U.S.
+ * government nor will be used for any purpose prohibited by the same.
+ *
+ ***************************************************************************/
+
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+UCODE_VS_FLAG (06000624_Enc)
+
+// Encrypt Patch code 06000624 for 6012 and equivalent
+
+CONST UINT8 ROMDATA CpuF15OrMicrocodePatch06000624_Enc [IDS_PAD_4K] =
+{
+  0x11,
+  0x20,
+  0x21,
+  0x10,
+  0x24,
+  0x06,
+  0x00,
+  0x06,
+  0x02,
+  0x80,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x12,
+  0x60,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x00,
+  0x53,
+  0x66,
+  0x89,
+  0xc4,
+  0x38,
+  0x90,
+  0x15,
+  0xbf,
+  0xec,
+  0xee,
+  0x70,
+  0xc6,
+  0xdb,
+  0x18,
+  0x66,
+  0x84,
+  0xa6,
+  0x2f,
+  0x3a,
+  0xe5,
+  0x2e,
+  0x91,
+  0x6c,
+  0x46,
+  0x2f,
+  0x1a,
+  0xdb,
+  0x02,
+  0xdc,
+  0x29,
+  0x17,
+  0xbd,
+  0x66,
+  0x14,
+  0x13,
+  0x10,
+  0xba,
+  0x9a,
+  0xa7,
+  0x1d,
+  0x79,
+  0x73,
+  0x29,
+  0x07,
+  0x12,
+  0x9d,
+  0xaf,
+  0x3d,
+  0xdd,
+  0x7d,
+  0xa5,
+  0x44,
+  0x88,
+  0x88,
+  0x5b,
+  0x0b,
+  0xfd,
+  0x07,
+  0xd1,
+  0x94,
+  0x4f,
+  0xdf,
+  0xa2,
+  0x0c,
+  0xa4,
+  0x2d,
+  0x61,
+  0x77,
+  0x3d,
+  0x0b,
+  0x37,
+  0xb8,
+  0x21,
+  0x82,
+  0xe4,
+  0xdb,
+  0x21,
+  0xc7,
+  0x10,
+  0x67,
+  0x4f,
+  0x68,
+  0x90,
+  0xec,
+  0x65,
+  0xe5,
+  0x0e,
+  0x49,
+  0x91,
+  0x85,
+  0xaa,
+  0x07,
+  0x98,
+  0xbe,
+  0x64,
+  0xaf,
+  0x48,
+  0xb7,
+  0x17,
+  0x5f,
+  0xcf,
+  0x34,
+  0x4b,
+  0x2f,
+  0x9f,
+  0x9c,
+  0xf0,
+  0xcd,
+  0xfa,
+  0xb2,
+  0x29,
+  0x92,
+  0xa0,
+  0xc8,
+  0x80,
+  0xcf,
+  0x03,
+  0x69,
+  0x8a,
+  0xb0,
+  0x70,
+  0x8d,
+  0x1a,
+  0x9c,
+  0xab,
+  0xe9,
+  0x0b,
+  0x69,
+  0x3d,
+  0xc5,
+  0x73,
+  0x40,
+  0xab,
+  0x2c,
+  0x50,
+  0xeb,
+  0x7c,
+  0x66,
+  0x4b,
+  0x36,
+  0x71,
+  0x18,
+  0x38,
+  0xf3,
+  0x02,
+  0x87,
+  0x89,
+  0x92,
+  0xc6,
+  0xae,
+  0x04,
+  0x29,
+  0xa9,
+  0x26,
+  0xcd,
+  0x5d,
+  0x06,
+  0xc5,
+  0x11,
+  0x45,
+  0xc8,
+  0x6d,
+  0x0d,
+  0x0f,
+  0x78,
+  0xa1,
+  0xcc,
+  0x9f,
+  0x73,
+  0x35,
+  0x6d,
+  0x97,
+  0x54,
+  0xe8,
+  0x99,
+  0xc2,
+  0x61,
+  0xca,
+  0x36,
+  0xfa,
+  0x45,
+  0x8d,
+  0x5c,
+  0xa1,
+  0x05,
+  0x5e,
+  0xe2,
+  0x97,
+  0xab,
+  0x45,
+  0x5c,
+  0x18,
+  0x8c,
+  0xc9,
+  0x1f,
+  0xe2,
+  0x8a,
+  0xe8,
+  0x7f,
+  0x42,
+  0xf5,
+  0x40,
+  0x58,
+  0x1a,
+  0xd2,
+  0xf2,
+  0x37,
+  0xfd,
+  0x1b,
+  0xa4,
+  0x80,
+  0x2c,
+  0xe1,
+  0x16,
+  0x72,
+  0x8e,
+  0x56,
+  0x40,
+  0x77,
+  0x94,
+  0xd3,
+  0x9c,
+  0xd1,
+  0x6c,
+  0x19,
+  0x53,
+  0x14,
+  0x7f,
+  0x58,
+  0x9e,
+  0x83,
+  0xda,
+  0xf5,
+  0x49,
+  0xe4,
+  0xff,
+  0x46,
+  0x10,
+  0x7c,
+  0xcf,
+  0xc2,
+  0x3c,
+  0xbc,
+  0xcc,
+  0x7e,
+  0x97,
+  0x76,
+  0x7e,
+  0x96,
+  0x2b,
+  0x28,
+  0xfc,
+  0x92,
+  0xa2,
+  0x5c,
+  0xf5,
+  0x82,
+  0x9a,
+  0x1d,
+  0x38,
+  0x2b,
+  0x76,
+  0x64,
+  0xf6,
+  0x43,
+  0xd7,
+  0x9b,
+  0x92,
+  0x92,
+  0x8a,
+  0x8e,
+  0xe8,
+  0x3b,
+  0xd2,
+  0x46,
+  0x68,
+  0x4b,
+  0xe2,
+  0x51,
+  0xcb,
+  0x5c,
+  0x85,
+  0x4c,
+  0x64,
+  0xaf,
+  0x3f,
+  0x41,
+  0x36,
+  0x73,
+  0x61,
+  0x74,
+  0xa4,
+  0xc5,
+  0x7f,
+  0xf2,
+  0x3e,
+  0xd6,
+  0xf4,
+  0x68,
+  0x43,
+  0xe3,
+  0x74,
+  0xe4,
+  0x08,
+  0x8f,
+  0x08,
+  0xc6,
+  0xb7,
+  0x87,
+  0x10,
+  0xb8,
+  0x31,
+  0xfd,
+  0x97,
+  0xff,
+  0xfa,
+  0x64,
+  0xdb,
+  0xf5,
+  0xc2,
+  0x98,
+  0x12,
+  0xfe,
+  0x04,
+  0x66,
+  0xc6,
+  0x83,
+  0x58,
+  0x16,
+  0x35,
+  0xde,
+  0xd6,
+  0xa0,
+  0x9c,
+  0x8d,
+  0x94,
+  0x4e,
+  0xc0,
+  0xa4,
+  0x38,
+  0xd1,
+  0x8b,
+  0x79,
+  0x79,
+  0x03,
+  0xd7,
+  0x3b,
+  0x72,
+  0x87,
+  0x1f,
+  0xcf,
+  0x4b,
+  0x8d,
+  0x4a,
+  0xbe,
+  0x99,
+  0xe9,
+  0xe8,
+  0x12,
+  0x87,
+  0x3a,
+  0xdf,
+  0x72,
+  0x79,
+  0x96,
+  0x19,
+  0x6b,
+  0x7a,
+  0x68,
+  0x50,
+  0xc2,
+  0x57,
+  0x9d,
+  0x85,
+  0x18,
+  0x07,
+  0x63,
+  0xa5,
+  0x74,
+  0x8a,
+  0x5f,
+  0x40,
+  0x9c,
+  0xef,
+  0x69,
+  0x6d,
+  0x69,
+  0x74,
+  0x04,
+  0xf5,
+  0xc9,
+  0x25,
+  0xdd,
+  0x8c,
+  0x02,
+  0x88,
+  0xe6,
+  0xb2,
+  0x4a,
+  0x09,
+  0xa8,
+  0xda,
+  0xb1,
+  0xf2,
+  0x9d,
+  0x33,
+  0x2b,
+  0x95,
+  0xb3,
+  0x79,
+  0x7a,
+  0x8d,
+  0x81,
+  0xdf,
+  0xfa,
+  0xd2,
+  0xb7,
+  0x56,
+  0x67,
+  0x31,
+  0x43,
+  0x29,
+  0xc4,
+  0x7c,
+  0x1d,
+  0x89,
+  0xf0,
+  0x50,
+  0x2c,
+  0x9c,
+  0xb5,
+  0x2b,
+  0x9e,
+  0xf5,
+  0x85,
+  0x49,
+  0x4e,
+  0x25,
+  0x8e,
+  0x1c,
+  0x90,
+  0x4d,
+  0xba,
+  0x04,
+  0x90,
+  0x2e,
+  0x4e,
+  0x13,
+  0xeb,
+  0xe5,
+  0xfa,
+  0xbe,
+  0x1e,
+  0x3f,
+  0x22,
+  0x7c,
+  0x0d,
+  0x1f,
+  0xf9,
+  0x2a,
+  0xa9,
+  0xe0,
+  0xe9,
+  0x01,
+  0x16,
+  0x52,
+  0x44,
+  0x69,
+  0x08,
+  0x0d,
+  0xcb,
+  0x1f,
+  0xdf,
+  0xee,
+  0x9b,
+  0xe5,
+  0xd8,
+  0xab,
+  0x73,
+  0x92,
+  0x13,
+  0xb5,
+  0x69,
+  0x5f,
+  0x6b,
+  0x33,
+  0xdd,
+  0xc4,
+  0x76,
+  0x10,
+  0x09,
+  0xb8,
+  0x20,
+  0x3f,
+  0x11,
+  0xed,
+  0x69,
+  0x3b,
+  0x14,
+  0x99,
+  0xbc,
+  0x3c,
+  0x78,
+  0x0f,
+  0xdc,
+  0x96,
+  0xd7,
+  0x09,
+  0xb9,
+  0x84,
+  0x17,
+  0x52,
+  0x53,
+  0x23,
+  0xc9,
+  0x98,
+  0xa1,
+  0xf9,
+  0x32,
+  0x63,
+  0xd6,
+  0x9f,
+  0x9f,
+  0x0c,
+  0x57,
+  0x03,
+  0xee,
+  0x36,
+  0xa9,
+  0xf1,
+  0x9c,
+  0xda,
+  0xab,
+  0x8b,
+  0x8f,
+  0x9e,
+  0x59,
+  0xea,
+  0x3a,
+  0x4c,
+  0x2a,
+  0x95,
+  0xa3,
+  0xf7,
+  0x09,
+  0x25,
+  0x99,
+  0xfb,
+  0x93,
+  0x9f,
+  0x10,
+  0xfd,
+  0xb4,
+  0xb1,
+  0x65,
+  0x35,
+  0xc9,
+  0x74,
+  0xaf,
+  0x82,
+  0xb4,
+  0x2f,
+  0x68,
+  0x30,
+  0xbe,
+  0x33,
+  0x0b,
+  0x98,
+  0x0f,
+  0xcf,
+  0x82,
+  0x47,
+  0xe8,
+  0x33,
+  0x6a,
+  0x6d,
+  0xf1,
+  0x44,
+  0x66,
+  0x1c,
+  0xa7,
+  0x85,
+  0xdd,
+  0x69,
+  0x27,
+  0x58,
+  0xcc,
+  0x30,
+  0xf5,
+  0x07,
+  0x1c,
+  0x03,
+  0x72,
+  0x40,
+  0x5e,
+  0xd1,
+  0xca,
+  0xc7,
+  0x2c,
+  0xf0,
+  0xb7,
+  0x83,
+  0x52,
+  0x82,
+  0xdb,
+  0x0b,
+  0xf0,
+  0xdf,
+  0xf3,
+  0x45,
+  0x69,
+  0xc9,
+  0xd7,
+  0x6c,
+  0xd6,
+  0x69,
+  0x06,
+  0x90,
+  0x49,
+  0x80,
+  0xc5,
+  0x07,
+  0x45,
+  0x6c,
+  0xa8,
+  0x78,
+  0x3e,
+  0xe9,
+  0xf6,
+  0x55,
+  0x10,
+  0xaa,
+  0x50,
+  0xe2,
+  0x68,
+  0xc4,
+  0x28,
+  0xb1,
+  0xae,
+  0xdf,
+  0x25,
+  0x33,
+  0x3b,
+  0x3d,
+  0xf3,
+  0xf6,
+  0x7d,
+  0x4d,
+  0xe8,
+  0xde,
+  0x2a,
+  0x6e,
+  0xee,
+  0x98,
+  0x1a,
+  0x4c,
+  0xd1,
+  0x1b,
+  0xfa,
+  0x17,
+  0x9e,
+  0x6b,
+  0xff,
+  0x43,
+  0xb2,
+  0x5b,
+  0xd9,
+  0x10,
+  0x38,
+  0x4b,
+  0xa2,
+  0x19,
+  0xbd,
+  0x4f,
+  0xdd,
+  0x10,
+  0xc2,
+  0x08,
+  0xc8,
+  0x52,
+  0x7c,
+  0xfe,
+  0x32,
+  0x9c,
+  0x29,
+  0xe4,
+  0xe0,
+  0x76,
+  0x4d,
+  0xf0,
+  0x86,
+  0x23,
+  0xed,
+  0xa9,
+  0x5a,
+  0x7c,
+  0xf8,
+  0x4e,
+  0x05,
+  0x8e,
+  0x93,
+  0x30,
+  0x02,
+  0x16,
+  0xbc,
+  0xeb,
+  0x90,
+  0x15,
+  0xbf,
+  0x74,
+  0x72,
+  0x8b,
+  0x3f,
+  0x87,
+  0x01,
+  0x1c,
+  0x66,
+  0x8d,
+  0xb8,
+  0x21,
+  0x97,
+  0x7d,
+  0x97,
+  0x06,
+  0x65,
+  0x55,
+  0x0e,
+  0x15,
+  0x57,
+  0xa7,
+  0x96,
+  0xe2,
+  0x3c,
+  0x91,
+  0xdc,
+  0x73,
+  0x8f,
+  0xca,
+  0x8e,
+  0xd6,
+  0x14,
+  0x6c,
+  0x65,
+  0x24,
+  0x9e,
+  0x36,
+  0x71,
+  0xa2,
+  0x81,
+  0x64,
+  0x28,
+  0x02,
+  0x8d,
+  0xe7,
+  0x04,
+  0x1b,
+  0xea,
+  0x95,
+  0x86,
+  0x2b,
+  0x22,
+  0x8b,
+  0x1d,
+  0x9d,
+  0x77,
+  0x40,
+  0xf4,
+  0xb6,
+  0x66,
+  0xd6,
+  0x0d,
+  0x23,
+  0x0f,
+  0x9a,
+  0x9b,
+  0x6b,
+  0x02,
+  0x33,
+  0x96,
+  0x6a,
+  0xbb,
+  0x22,
+  0x32,
+  0x14,
+  0xec,
+  0x38,
+  0x76,
+  0x3b,
+  0x4b,
+  0x0c,
+  0x7f,
+  0x65,
+  0xc9,
+  0xcb,
+  0x18,
+  0xc7,
+  0xb0,
+  0x88,
+  0xa8,
+  0xe3,
+  0x18,
+  0xa8,
+  0x66,
+  0xaf,
+  0x4c,
+  0x10,
+  0xb6,
+  0x60,
+  0x3d,
+  0x06,
+  0x33,
+  0x14,
+  0x83,
+  0x6f,
+  0x26,
+  0xf7,
+  0x05,
+  0x8e,
+  0x94,
+  0x3a,
+  0x12,
+  0x3a,
+  0x29,
+  0x96,
+  0xda,
+  0x79,
+  0xa4,
+  0xaa,
+  0xdd,
+  0x35,
+  0x99,
+  0x18,
+  0x3f,
+  0xd2,
+  0xb1,
+  0x92,
+  0x3c,
+  0x17,
+  0xe1,
+  0x88,
+  0xd8,
+  0x1f,
+  0xc4,
+  0xeb,
+  0xb4,
+  0x82,
+  0xfd,
+  0x59,
+  0xbd,
+  0x80,
+  0x0a,
+  0x44,
+  0x5b,
+  0x95,
+  0xe7,
+  0x3a,
+  0x4e,
+  0xfc,
+  0x81,
+  0x8c,
+  0x15,
+  0x5b,
+  0x46,
+  0xc9,
+  0x55,
+  0x7c,
+  0x14,
+  0x90,
+  0xc4,
+  0xa1,
+  0x7b,
+  0xc3,
+  0xd5,
+  0xb8,
+  0xc1,
+  0xb3,
+  0x28,
+  0x02,
+  0xcd,
+  0xd2,
+  0xd7,
+  0x41,
+  0x6e,
+  0x18,
+  0xca,
+  0x46,
+  0x08,
+  0xc7,
+  0x16,
+  0x7d,
+  0xc5,
+  0xd7,
+  0xbd,
+  0xae,
+  0x08,
+  0x14,
+  0x4a,
+  0x9f,
+  0x5f,
+  0x59,
+  0xce,
+  0xa4,
+  0x1b,
+  0xf5,
+  0xc5,
+  0x2a,
+  0xb9,
+  0xb8,
+  0xc3,
+  0x9d,
+  0x9b,
+  0xca,
+  0x81,
+  0x3a,
+  0x1c,
+  0x55,
+  0xf4,
+  0xbb,
+  0xba,
+  0xf3,
+  0x7f,
+  0xe2,
+  0x1d,
+  0x88,
+  0xbe,
+  0x86,
+  0x3c,
+  0x77,
+  0xaa,
+  0xd3,
+  0x3e,
+  0xc2,
+  0xf0,
+  0x44,
+  0xd9,
+  0x47,
+  0x9d,
+  0x1d,
+  0xf0,
+  0x1b,
+  0x8f,
+  0x8a,
+  0xc5,
+  0x75,
+  0x20,
+  0x3c,
+  0xb6,
+  0x3a,
+  0xb5,
+  0xb7,
+  0xdb,
+  0x00,
+  0x14,
+  0x60,
+  0x19,
+  0x5e,
+  0xcc,
+  0x7c,
+  0x70,
+  0x9a,
+  0x4a,
+  0x21,
+  0x7b,
+  0x67,
+  0xa1,
+  0x62,
+  0xe9,
+  0x2a,
+  0x3f,
+  0x71,
+  0x8b,
+  0xbf,
+  0xc2,
+  0x68,
+  0xec,
+  0xbc,
+  0x2a,
+  0xa3,
+  0x53,
+  0x5f,
+  0xbf,
+  0x3e,
+  0x8a,
+  0x2d,
+  0x09,
+  0x4d,
+  0xb1,
+  0x82,
+  0xb6,
+  0xfe,
+  0x83,
+  0xe7,
+  0x16,
+  0xf7,
+  0x64,
+  0x6e,
+  0x55,
+  0xd9,
+  0xdf,
+  0xc0,
+  0xef,
+  0x09,
+  0x68,
+  0x8a,
+  0x16,
+  0xe4,
+  0xd3,
+  0x24,
+  0x1f,
+  0xb4,
+  0x77,
+  0x10,
+  0xb6,
+  0x94,
+  0x2a,
+  0xda,
+  0x47,
+  0x49,
+  0xc7,
+  0x15,
+  0x5c,
+  0x68,
+  0x34,
+  0xfc,
+  0x30,
+  0xd2,
+  0x94,
+  0x37,
+  0x00,
+  0x35,
+  0x7f,
+  0x6f,
+  0xb9,
+  0x5e,
+  0xa9,
+  0xc8,
+  0x82,
+  0x77,
+  0x7f,
+  0xbf,
+  0xa3,
+  0xb3,
+  0xdd,
+  0x2a,
+  0xfd,
+  0x0d,
+  0x01,
+  0x5e,
+  0xbb,
+  0x03,
+  0x0b,
+  0x0b,
+  0x74,
+  0x80,
+  0x5d,
+  0x38,
+  0x01,
+  0x54,
+  0x04,
+  0xa2,
+  0x22,
+  0xbc,
+  0x3f,
+  0xc8,
+  0xbc,
+  0x63,
+  0x17,
+  0x5f,
+  0x3c,
+  0x9b,
+  0xd0,
+  0xf3,
+  0xc8,
+  0xb7,
+  0x37,
+  0xe4,
+  0xbe,
+  0x20,
+  0x1c,
+  0x6f,
+  0x3d,
+  0x0f,
+  0x75,
+  0xc6,
+  0x1a,
+  0xc8,
+  0x38,
+  0xe5,
+  0x6a,
+  0x02,
+  0xc3,
+  0x8a,
+  0xcd,
+  0x80,
+  0x4e,
+  0x18,
+  0xb0,
+  0xd2,
+  0x50,
+  0x2a,
+  0x4f,
+  0x2f,
+  0x80,
+  0xac,
+  0xa2,
+  0xb7,
+  0xba,
+  0x17,
+  0x23,
+  0xd0,
+  0x89,
+  0x37,
+  0xb2,
+  0xbe,
+  0x7d,
+  0x7c,
+  0x74,
+  0xbb,
+  0xaf,
+  0x60,
+  0x1d,
+  0xa5,
+  0x0c,
+  0x15,
+  0x53,
+  0xeb,
+  0xc3,
+  0x45,
+  0x16,
+  0x5e,
+  0x3d,
+  0xe2,
+  0xe4,
+  0x58,
+  0x63,
+  0x99,
+  0x5e,
+  0x9f,
+  0x2c,
+  0x2b,
+  0x1d,
+  0xee,
+  0x56,
+  0x3f,
+  0x75,
+  0x50,
+  0x50,
+  0x7b,
+  0x8d,
+  0x97,
+  0xc5,
+  0x51,
+  0x02,
+  0xe5,
+  0xa6,
+  0xfb,
+  0x4b,
+  0x31,
+  0xe7,
+  0x2f,
+  0xeb,
+  0x6d,
+  0x05,
+  0xfc,
+  0x66,
+  0xd3,
+  0xc7,
+  0x98,
+  0x05,
+  0x25,
+  0xb0,
+  0x58,
+  0xce,
+  0xd6,
+  0xef,
+  0xd7,
+  0xf4,
+  0x9f,
+  0x47,
+  0x1f,
+  0xfb,
+  0x1c,
+  0x05,
+  0x64,
+  0x6b,
+  0xf7,
+  0xbf,
+  0xd1,
+  0xfe,
+  0x07,
+  0x4a,
+  0xe9,
+  0xca,
+  0x61,
+  0xa5,
+  0x0e,
+  0xab,
+  0x15,
+  0xce,
+  0x9e,
+  0x9c,
+  0x91,
+  0x8e,
+  0x0b,
+  0x1b,
+  0x9b,
+  0xd6,
+  0x22,
+  0x49,
+  0x10,
+  0xb4,
+  0x53,
+  0xf7,
+  0xbc,
+  0x32,
+  0x72,
+  0x14,
+  0xb7,
+  0x2b,
+  0x1f,
+  0x77,
+  0x3a,
+  0x8b,
+  0xe5,
+  0x28,
+  0x5e,
+  0xe0,
+  0xe2,
+  0x39,
+  0xc0,
+  0xb5,
+  0x10,
+  0xd7,
+  0x79,
+  0x35,
+  0x6c,
+  0x27,
+  0xe7,
+  0xde,
+  0xc0,
+  0x89,
+  0x2d,
+  0xe4,
+  0x8c,
+  0x60,
+  0x76,
+  0x6a,
+  0x0f,
+  0x51,
+  0xfc,
+  0x1e,
+  0x02,
+  0x7a,
+  0x20,
+  0xcd,
+  0xc7,
+  0x5c,
+  0xd4,
+  0xf1,
+  0x1d,
+  0xd0,
+  0xc2,
+  0x79,
+  0x59,
+  0x67,
+  0x0d,
+  0x26,
+  0x97,
+  0xa2,
+  0x9f,
+  0xfc,
+  0x9d,
+  0xad,
+  0x7a,
+  0x91,
+  0x98,
+  0x3b,
+  0x95,
+  0xe0,
+  0x06,
+  0x52,
+  0x09,
+  0xc0,
+  0x86,
+  0x7c,
+  0x94,
+  0xb2,
+  0x8e,
+  0x86,
+  0xb5,
+  0x73,
+  0x88,
+  0xef,
+  0x18,
+  0x59,
+  0xe8,
+  0x9e,
+  0xc5,
+  0xd0,
+  0x56,
+  0x53,
+  0xf5,
+  0xbf,
+  0x34,
+  0x12,
+  0xd4,
+  0x06,
+  0x11,
+  0xe3,
+  0xc6,
+  0xdd,
+  0xa6,
+  0x2d,
+  0x02,
+  0x0b,
+  0x7d,
+  0x51,
+  0xdd,
+  0x17,
+  0xd3,
+  0x6a,
+  0x2b,
+  0x9f,
+  0x24,
+  0x9e,
+  0xd8,
+  0x98,
+  0x03,
+  0x3a,
+  0xa4,
+  0xee,
+  0x99,
+  0x31,
+  0x72,
+  0xfe,
+  0x12,
+  0x48,
+  0xcf,
+  0x59,
+  0xd4,
+  0x66,
+  0x3a,
+  0xdf,
+  0xf1,
+  0x13,
+  0x2e,
+  0x9a,
+  0x05,
+  0x87,
+  0x60,
+  0x41,
+  0x56,
+  0x09,
+  0xef,
+  0x0d,
+  0x9c,
+  0x2d,
+  0xc1,
+  0xc8,
+  0xc3,
+  0x8f,
+  0x61,
+  0xf3,
+  0x66,
+  0x7c,
+  0xdc,
+  0x49,
+  0xc1,
+  0x3b,
+  0xfa,
+  0xa8,
+  0xa1,
+  0xf5,
+  0xcb,
+  0xfa,
+  0xc8,
+  0x74,
+  0x2f,
+  0xdb,
+  0x33,
+  0x8b,
+  0x48,
+  0x5e,
+  0x1d,
+  0x81,
+  0x8e,
+  0x99,
+  0xba,
+  0x82,
+  0xd1,
+  0x4b,
+  0xfe,
+  0x68,
+  0x73,
+  0x6c,
+  0x92,
+  0x8e,
+  0xf8,
+  0xf0,
+  0x5a,
+  0x43,
+  0x6d,
+  0xef,
+  0xc3,
+  0x17,
+  0x99,
+  0x5b,
+  0xe5,
+  0x63,
+  0x5f,
+  0x72,
+  0xd4,
+  0x22,
+  0x88,
+  0xb7,
+  0x52,
+  0xc8,
+  0x12,
+  0x7f,
+  0x26,
+  0xf2,
+  0xaf,
+  0x16,
+  0x37,
+  0xc8,
+  0x7c,
+  0x85,
+  0xb9,
+  0x15,
+  0x27,
+  0xbc,
+  0x2d,
+  0x7e,
+  0x86,
+  0x76,
+  0x62,
+  0xb9,
+  0xda,
+  0xf4,
+  0x0c,
+  0x1f,
+  0x7b,
+  0xed,
+  0xde,
+  0xb7,
+  0x54,
+  0x15,
+  0x69,
+  0x2c,
+  0x03,
+  0xfd,
+  0xaf,
+  0xb1,
+  0x6d,
+  0x20,
+  0x9d,
+  0x81,
+  0xdc,
+  0xe8,
+  0x83,
+  0xa4,
+  0xf3,
+  0x70,
+  0x75,
+  0x9c,
+  0xcd,
+  0x30,
+  0x5e,
+  0x7d,
+  0x6a,
+  0xbb,
+  0x98,
+  0x64,
+  0x6a,
+  0x03,
+  0xb0,
+  0xc1,
+  0x17,
+  0x7d,
+  0x89,
+  0x18,
+  0x56,
+  0xed,
+  0x6b,
+  0xde,
+  0xbf,
+  0x1e,
+  0x3a,
+  0x97,
+  0x37,
+  0xd9,
+  0xf2,
+  0xcc,
+  0x72,
+  0xa0,
+  0xd5,
+  0xaa,
+  0x5f,
+  0xe8,
+  0x36,
+  0x2a,
+  0x0d,
+  0x04,
+  0xa5,
+  0x66,
+  0x28,
+  0xe8,
+  0x41,
+  0x04,
+  0x98,
+  0x3b,
+  0xd1,
+  0x88,
+  0x88,
+  0xe6,
+  0xee,
+  0x5e,
+  0xf8,
+  0xdd,
+  0xf3,
+  0xc1,
+  0x61,
+  0x3c,
+  0xfa,
+  0x95,
+  0x3a,
+  0xf6,
+  0x07,
+  0xfd,
+  0xf3,
+  0xc6,
+  0x55,
+  0xcb,
+  0x7b,
+  0x94,
+  0x4a,
+  0x9f,
+  0x45,
+  0xb9,
+  0xb2,
+  0x01,
+  0xe5,
+  0xe1,
+  0x9a,
+  0xdb,
+  0x69,
+  0xae,
+  0x70,
+  0x6e,
+  0x58,
+  0x5b,
+  0x06,
+  0x52,
+  0x12,
+  0xef,
+  0xb3,
+  0x9a,
+  0x3c,
+  0x9b,
+  0x56,
+  0x4d,
+  0xd8,
+  0x5c,
+  0x29,
+  0xed,
+  0x3a,
+  0x60,
+  0xfc,
+  0x28,
+  0x65,
+  0xe2,
+  0x85,
+  0x26,
+  0x2a,
+  0x49,
+  0x59,
+  0x46,
+  0xe9,
+  0xb1,
+  0x55,
+  0x5e,
+  0x49,
+  0xe4,
+  0x40,
+  0xa6,
+  0xf2,
+  0x5c,
+  0x20,
+  0xdf,
+  0x39,
+  0x29,
+  0x1a,
+  0x8d,
+  0x49,
+  0x2d,
+  0xe2,
+  0x4d,
+  0xfe,
+  0x7a,
+  0x36,
+  0x27,
+  0x4e,
+  0xf4,
+  0xec,
+  0x75,
+  0x94,
+  0x1e,
+  0x09,
+  0x9f,
+  0xbe,
+  0x6c,
+  0x08,
+  0x22,
+  0x38,
+  0x5e,
+  0x15,
+  0x71,
+  0x2c,
+  0x26,
+  0xe1,
+  0xf2,
+  0xa2,
+  0x60,
+  0xee,
+  0xb7,
+  0x22,
+  0x50,
+  0x95,
+  0x0e,
+  0xc6,
+  0xa2,
+  0xf3,
+  0x61,
+  0x28,
+  0xfa,
+  0xfa,
+  0x86,
+  0x78,
+  0x22,
+  0xdd,
+  0x90,
+  0xaa,
+  0x70,
+  0x93,
+  0x9c,
+  0xe3,
+  0xa6,
+  0xd7,
+  0xfa,
+  0x2f,
+  0xe9,
+  0xe7,
+  0xfd,
+  0xb0,
+  0x19,
+  0xce,
+  0x87,
+  0x61,
+  0x76,
+  0xba,
+  0xee,
+  0x97,
+  0x11,
+  0xbf,
+  0x6a,
+  0x26,
+  0x72,
+  0xa0,
+  0x62,
+  0x3c,
+  0xd7,
+  0x72,
+  0xda,
+  0xb5,
+  0x84,
+  0x59,
+  0xda,
+  0x68,
+  0x47,
+  0x75,
+  0x1f,
+  0xfd,
+  0x49,
+  0x8a,
+  0xeb,
+  0x6d,
+  0x50,
+  0x3a,
+  0x4b,
+  0x63,
+  0xe3,
+  0x7b,
+  0xff,
+  0xf1,
+  0xae,
+  0x3e,
+  0x4e,
+  0xf2,
+  0xcd,
+  0x0a,
+  0xcb,
+  0x1d,
+  0xde,
+  0xc7,
+  0x63,
+  0x2a,
+  0x60,
+  0x6e,
+  0x2c,
+  0x56,
+  0x83,
+  0x6b,
+  0xa7,
+  0xfd,
+  0x9f,
+  0x68,
+  0x10,
+  0x92,
+  0x70,
+  0x07,
+  0xba,
+  0x98,
+  0xd5,
+  0xf3,
+  0x1e,
+  0x73,
+  0x17,
+  0x41,
+  0x51,
+  0x3a,
+  0x77,
+  0xed,
+  0x43,
+  0xda,
+  0x39,
+  0x8e,
+  0xb6,
+  0xf6,
+  0x94,
+  0x66,
+  0x48,
+  0x0c,
+  0x4f,
+  0xaa,
+  0x64,
+  0x52,
+  0xa6,
+  0xca,
+  0x37,
+  0xa4,
+  0xc6,
+  0x20,
+  0x9b,
+  0x69,
+  0x85,
+  0xa4,
+  0xc0,
+  0x95,
+  0xf5,
+  0x91,
+  0x4d,
+  0x08,
+  0x12,
+  0xae,
+  0x97,
+  0xf8,
+  0x58,
+  0xa2,
+  0xb9,
+  0xfb,
+  0xff,
+  0x93,
+  0xa5,
+  0xe5,
+  0x4c,
+  0xdc,
+  0x3e,
+  0x33,
+  0xe3,
+  0xf3,
+  0xcb,
+  0x0a,
+  0x24,
+  0xfb,
+  0x9c,
+  0xdc,
+  0xb3,
+  0x2d,
+  0xf3,
+  0x01,
+  0x01,
+  0x23,
+  0x65,
+  0xac,
+  0x18,
+  0xe1,
+  0xf6,
+  0x6a,
+  0xda,
+  0x00,
+  0x01,
+  0x7e,
+  0x67,
+  0xc4,
+  0xe4,
+  0x46,
+  0x9e,
+  0xf1,
+  0xe1,
+  0x70,
+  0xaf,
+  0x0e,
+  0xb9,
+  0xd1,
+  0xf8,
+  0xac,
+  0x02,
+  0xd8,
+  0x1b,
+  0x7e,
+  0x05,
+  0x3c,
+  0x75,
+  0x22,
+  0x9a,
+  0x95,
+  0xf1,
+  0x76,
+  0x8f,
+  0x12,
+  0xcc,
+  0x6c,
+  0x60,
+  0x13,
+  0x33,
+  0x52,
+  0x12,
+  0x20,
+  0xdc,
+  0x83,
+  0x03,
+  0x88,
+  0x59,
+  0x91,
+  0x0b,
+  0x87,
+  0xc1,
+  0x0e,
+  0x8c,
+  0x69,
+  0x18,
+  0x49,
+  0x56,
+  0x22,
+  0xfc,
+  0xbe,
+  0x5b,
+  0x7c,
+  0x09,
+  0x89,
+  0x28,
+  0xae,
+  0xc8,
+  0x93,
+  0x1c,
+  0x42,
+  0x5f,
+  0x43,
+  0xfb,
+  0xb8,
+  0xc9,
+  0x0c,
+  0x91,
+  0xce,
+  0xad,
+  0x05,
+  0xd3,
+  0x0d,
+  0x01,
+  0x38,
+  0x6a,
+  0x5f,
+  0xaa,
+  0x82,
+  0x6b,
+  0x91,
+  0x4d,
+  0xab,
+  0xaf,
+  0x1a,
+  0x4d,
+  0x59,
+  0x83,
+  0x8f,
+  0x85,
+  0x12,
+  0xe4,
+  0x36,
+  0xd9,
+  0x9f,
+  0x8d,
+  0xc4,
+  0x7b,
+  0xa6,
+  0x98,
+  0x94,
+  0x12,
+  0x5c,
+  0xb9,
+  0x42,
+  0x24,
+  0xf9,
+  0x55,
+  0x4d,
+  0x5d,
+  0x05,
+  0xe5,
+  0x2e,
+  0xfb,
+  0xe4,
+  0xca,
+  0x34,
+  0xf1,
+  0xd4,
+  0x6b,
+  0x86,
+  0x5a,
+  0x59,
+  0x88,
+  0x4b,
+  0xff,
+  0xaa,
+  0xf7,
+  0x78,
+  0xa3,
+  0x64,
+  0x71,
+  0x87,
+  0x76,
+  0xc6,
+  0x10,
+  0x42,
+  0xcf,
+  0xa9,
+  0x20,
+  0x47,
+  0x1c,
+  0xfa,
+  0xae,
+  0x20,
+  0x2e,
+  0xf0,
+  0x09,
+  0x90,
+  0x9d,
+  0xf7,
+  0xb5,
+  0x22,
+  0x3d,
+  0x39,
+  0x3b,
+  0x54,
+  0x3b,
+  0x8d,
+  0xa1,
+  0x41,
+  0x4f,
+  0xe2,
+  0x78,
+  0x7d,
+  0x71,
+  0x41,
+  0xf1,
+  0xf2,
+  0x2f,
+  0x45,
+  0x90,
+  0x8f,
+  0xa4,
+  0x38,
+  0x9c,
+  0x7c,
+  0x17,
+  0x44,
+  0xe6,
+  0x97,
+  0x95,
+  0xad,
+  0x48,
+  0x3d,
+  0x22,
+  0x15,
+  0x23,
+  0x10,
+  0x91,
+  0xba,
+  0x81,
+  0x11,
+  0x5d,
+  0x05,
+  0xb9,
+  0x15,
+  0xdf,
+  0xe1,
+  0x19,
+  0xde,
+  0x55,
+  0x33,
+  0x9d,
+  0x70,
+  0xb9,
+  0x84,
+  0x39,
+  0x35,
+  0x1c,
+  0x7c,
+  0x0d,
+  0xd0,
+  0xb7,
+  0x34,
+  0xf1,
+  0xce,
+  0xe7,
+  0x76,
+  0xfd,
+  0x71,
+  0xe6,
+  0x46,
+  0xa5,
+  0x62,
+  0x70,
+  0x27,
+  0xdc,
+  0x04,
+  0x52,
+  0xfb,
+  0x65,
+  0x03,
+  0xfa,
+  0x0f,
+  0xdc,
+  0x76,
+  0x5b,
+  0xe2,
+  0x6d,
+  0xbb,
+  0x49,
+  0x99,
+  0x5a,
+  0xfe,
+  0xab,
+  0xc2,
+  0x33,
+  0x4d,
+  0x4b,
+  0xad,
+  0xef,
+  0xa8,
+  0x65,
+  0x20,
+  0xaf,
+  0x9c,
+  0xe8,
+  0x34,
+  0xee,
+  0xa4,
+  0xdd,
+  0xd3,
+  0xf3,
+  0x58,
+  0xbb,
+  0x10,
+  0x34,
+  0x6c,
+  0x5a,
+  0x02,
+  0xa2,
+  0xc0,
+  0x29,
+  0x3f,
+  0xc3,
+  0xde,
+  0x67,
+  0x25,
+  0x0c,
+  0xd2,
+  0x1c,
+  0xd0,
+  0x9e,
+  0xa6,
+  0xe9,
+  0xbf,
+  0x09,
+  0xbd,
+  0xf9,
+  0xc1,
+  0xc0,
+  0x87,
+  0x05,
+  0x31,
+  0x2b,
+  0x35,
+  0x7c,
+  0x4e,
+  0x14,
+  0x82,
+  0x3f,
+  0x7c,
+  0x53,
+  0x9e,
+  0xa5,
+  0xff,
+  0x2a,
+  0x0b,
+  0xf8,
+  0x5b,
+  0xab,
+  0xa2,
+  0x45,
+  0x60,
+  0x1b,
+  0xb0,
+  0x32,
+  0x3d,
+  0xe1,
+  0xc5,
+  0xc4,
+  0x5a,
+  0x75,
+  0xee,
+  0x10,
+  0x69,
+  0x76,
+  0x37,
+  0x1a,
+  0x28,
+  0x42,
+  0xc9,
+  0xea,
+  0xcc,
+  0xa1,
+  0xda,
+  0x0b,
+  0x8c,
+  0x3b,
+  0xd0,
+  0x06,
+  0xa6,
+  0x90,
+  0x49,
+  0x07,
+  0xfd,
+  0x54,
+  0x8e,
+  0x9a,
+  0xa0,
+  0x24,
+  0xb0,
+  0x58,
+  0x26,
+  0x8f,
+  0x04,
+  0x75,
+  0x45,
+  0x70,
+  0x70,
+  0x98,
+  0xb8,
+  0xdd,
+  0xc7,
+  0xa0,
+  0x0d,
+  0x8c,
+  0xbe,
+  0x1c,
+  0x94,
+  0x70,
+  0xb0,
+  0xd7,
+  0x83,
+  0x2f,
+  0xdd,
+  0xf7,
+  0xb0,
+  0x25,
+  0x3a,
+  0x9d,
+  0x2d,
+  0x5b,
+  0x08,
+  0x74,
+  0x0c,
+  0x74,
+  0x0a,
+  0x5d,
+  0x9c,
+  0x2c,
+  0x32,
+  0xe6,
+  0x29,
+  0x66,
+  0x00,
+  0xa7,
+  0x33,
+  0x08,
+  0x13,
+  0x98,
+  0x7e,
+  0x2a,
+  0xc7,
+  0x75,
+  0x76,
+  0xa5,
+  0xcd,
+  0x13,
+  0xec,
+  0x9d,
+  0x56,
+  0xb1,
+  0x8f,
+  0x8b,
+  0x40,
+  0x71,
+  0x00,
+  0xa0,
+  0x0a,
+  0x29,
+  0x92,
+  0x08,
+  0x56,
+  0x12,
+  0xd0,
+  0x2e,
+  0xcd,
+  0x45,
+  0xaa,
+  0x6d,
+  0x01,
+  0xe7,
+  0x70,
+  0x08,
+  0x08,
+  0xb8,
+  0xd6,
+  0xbb,
+  0xfa,
+  0x6c,
+  0x63,
+  0x04,
+  0x91,
+  0x82,
+  0x12,
+  0x5a,
+  0xf0,
+  0x6f,
+  0xd0,
+  0xc0,
+  0x57,
+  0x6e,
+  0x05,
+  0x94,
+  0x59,
+  0x9b,
+  0x67,
+  0xeb,
+  0xd5,
+  0xf0,
+  0x5a,
+  0x1b,
+  0x12,
+  0x83,
+  0xe0,
+  0xce,
+  0x15,
+  0x90,
+  0x05,
+  0x8c,
+  0xbb,
+  0xb1,
+  0x09,
+  0x49,
+  0x67,
+  0xff,
+  0x15,
+  0x3a,
+  0x5f,
+  0x1a,
+  0x6e,
+  0xe5,
+  0xb2,
+  0xb8,
+  0x9c,
+  0x8d,
+  0x3c,
+  0x77,
+  0xf8,
+  0x3a,
+  0xf6,
+  0x9d,
+  0x8a,
+  0x4f,
+  0xa7,
+  0x07,
+  0xaf,
+  0x19,
+  0xa1,
+  0x3a,
+  0x65,
+  0x03,
+  0x51,
+  0xdb,
+  0x24,
+  0xf7,
+  0x82,
+  0x76,
+  0x2b,
+  0xb6,
+  0x38,
+  0xc6,
+  0xb8,
+  0xb0,
+  0x40,
+  0xcd,
+  0xf4,
+  0xdc,
+  0x50,
+  0x74,
+  0x55,
+  0x12,
+  0x6c,
+  0xef,
+  0xbb,
+  0xd4,
+  0x47,
+  0x1a,
+  0xf7,
+  0xd1,
+  0xd6,
+  0x28,
+  0x2d,
+  0x91,
+  0x9f,
+  0xc8,
+  0x0f,
+  0xae,
+  0x4a,
+  0xcf,
+  0x8a,
+  0xbd,
+  0xee,
+  0x96,
+  0x0d,
+  0x5d,
+  0xf4,
+  0x2c,
+  0xfe,
+  0x77,
+  0x4a,
+  0x41,
+  0xe0,
+  0x39,
+  0xaa,
+  0x4f,
+  0x5c,
+  0xb3,
+  0x6d,
+  0xa6,
+  0xb1,
+  0x50,
+  0xe9,
+  0x21,
+  0xec,
+  0xc2,
+  0x04,
+  0x34,
+  0x31,
+  0x2c,
+  0xea,
+  0x24,
+  0xdd,
+  0x2b,
+  0x6a,
+  0xe6,
+  0x7e,
+  0x44,
+  0x90,
+  0x5c,
+  0x57,
+  0x0c,
+  0x4d,
+  0xd8,
+  0x7b,
+  0x3a,
+  0x68,
+  0x16,
+  0x5e,
+  0x87,
+  0xda,
+  0x0d,
+  0x0d,
+  0x85,
+  0xb3,
+  0x3a,
+  0x67,
+  0x92,
+  0x06,
+  0x30,
+  0x1a,
+  0x96,
+  0x89,
+  0xa8,
+  0x08,
+  0xc9,
+  0x35,
+  0xd4,
+  0x48,
+  0x4a,
+  0x98,
+  0x0e,
+  0x7e,
+  0x1d,
+  0x4c,
+  0x0e,
+  0xcf,
+  0xc5,
+  0xd4,
+  0xa3,
+  0x34,
+  0x50,
+  0x93,
+  0xed,
+  0xa4,
+  0xf2,
+  0x3e,
+  0x50,
+  0x4a,
+  0x48,
+  0x66,
+  0xda,
+  0xc6,
+  0xb9,
+  0x4a,
+  0xef,
+  0x27,
+  0xb3,
+  0x77,
+  0x6f,
+  0x29,
+  0xf9,
+  0xba,
+  0xad,
+  0x90,
+  0xe2,
+  0xeb,
+  0xeb,
+  0x43,
+  0x9d,
+  0x46,
+  0xa4,
+  0x7d,
+  0x51,
+  0x7f,
+  0x21,
+  0xea,
+  0x64,
+  0x29,
+  0x16,
+  0x90,
+  0x71,
+  0x16,
+  0x3b,
+  0xf0,
+  0xae,
+  0x2a,
+  0xf9,
+  0x12,
+  0x63,
+  0x5a,
+  0xab,
+  0xea,
+  0x3d,
+  0xfc,
+  0x21,
+  0xb6,
+  0x16,
+  0x97,
+  0xf7,
+  0x26,
+  0x3e,
+  0x65,
+  0x7d,
+  0xb0,
+  0x0c,
+  0xcc,
+  0xa0,
+  0x33,
+  0x01,
+  0x89,
+  0xa5,
+  0x73,
+  0xcb,
+  0x6f,
+  0xe4,
+  0x9a,
+  0x13,
+  0xf4,
+  0x6b,
+  0x2f,
+  0xf2,
+  0xfc,
+  0x11,
+  0x81,
+  0x88,
+  0xb6,
+  0x4f,
+  0xed,
+  0xc1,
+  0xb2,
+  0x6e,
+  0x37,
+  0xd9,
+  0x09,
+  0xd1,
+  0xd5,
+  0x34,
+  0xf1,
+  0xee,
+  0x2a,
+  0xfd,
+  0x5c,
+  0x9a,
+  0x07,
+  0xf1,
+  0xec,
+  0x96,
+  0x9c,
+  0xdd,
+  0x0c,
+  0x8e,
+  0xd9,
+  0x8a,
+  0x81,
+  0x5a,
+  0xfd,
+  0x8b,
+  0x9c,
+  0x2f,
+  0xb3,
+  0x29,
+  0xd2,
+  0x19,
+  0x6f,
+  0xfd,
+  0x04,
+  0x6d,
+  0x75,
+  0x3d,
+  0x5e,
+  0x4e,
+  0x0a,
+};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatchTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatchTables.c
new file mode 100644
index 0000000000..4173492b31
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMicrocodePatchTables.c
@@ -0,0 +1,112 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORMICROCODEPATCHTABLES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST MICROCODE_PATCHES_4K ROMDATA *CpuF15OrMicroCodePatchArray[];
+extern CONST UINT8 ROMDATA CpuF15OrNumberOfMicrocodePatches;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF15OrMicroCodePatchesStruct (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **OrUcodePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns a table containing the appropriate microcode patches.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  OrUcodePtr               Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF15OrMicroCodePatchesStruct (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **OrUcodePtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = CpuF15OrNumberOfMicrocodePatches;
+  *OrUcodePtr = &CpuF15OrMicroCodePatchArray[0];
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMsgBasedC1e.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMsgBasedC1e.c
new file mode 100644
index 0000000000..f7e148d80b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMsgBasedC1e.c
@@ -0,0 +1,305 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi Message-Based C1e feature support functions.
+ *
+ * Provides the functions necessary to initialize the message-based C1e feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 53157 $   @e \$Date: 2011-05-16 13:46:21 -0600 (Mon, 16 May 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuMsgBasedC1e.h"
+#include "cpuApicUtilities.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "F15PackageType.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORMSGBASEDC1E_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F15OrInitializeMsgBasedC1eOnCore (
+  IN       VOID              *BmStsAddress,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+STATIC
+IsDramScrubberEnabled (
+  IN       PCI_ADDR PciAddress,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should message-based C1e be enabled
+ *
+ * @param[in]    MsgBasedC1eServices Pointer to this CPU's Messsage based C1e family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @retval       TRUE               Messsage based C1e is supported.
+ *
+ */
+BOOLEAN
+STATIC
+F15OrIsMsgBasedC1eSupported (
+  IN       MSG_BASED_C1E_FAMILY_SERVICES *MsgBasedC1eServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPU_LOGICAL_ID LogicalId;
+
+  GetLogicalIdOfSocket (Socket, &LogicalId, StdHeader);
+  return ((BOOLEAN) ((LogicalId.Revision & AMD_F15_ALL) != 0));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Core 0 task to enable message-based C1e on a family 15h CPU.
+ *
+ * @param[in]    MsgBasedC1eServices Pointer to this CPU's Messsage based C1e family services.
+ * @param[in]    EntryPoint          Timepoint designator.
+ * @param[in]    PlatformConfig      Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @return       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F15OrInitializeMsgBasedC1e (
+  IN       MSG_BASED_C1E_FAMILY_SERVICES *MsgBasedC1eServices,
+  IN       UINT64 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32       AndMask;
+  UINT32       Core;
+  UINT32       Module;
+  UINT32       OrMask;
+  UINT32       LocalPciRegister;
+  UINT32       Socket;
+  UINT32       PackageType;
+  AP_TASK      TaskPtr;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredSts;
+
+  if ((EntryPoint & (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC)) != 0) {
+    PackageType = LibAmdGetPackageType (StdHeader);
+    // Note that this core 0 does NOT have the ability to launch
+    // any of its cores.  Attempting to do so could lead to a system
+    // hang.
+
+    // Set F3xA0[IdleExitEn] = 1
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = PW_CTL_MISC_REG;
+    AndMask = 0xFFFFFFFF;
+    OrMask = 0;
+    ((POWER_CTRL_MISC_REGISTER *) &OrMask)->IdleExitEn = 1;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F3xA0
+
+    // Set F4x128[CstateMsgDis] = 0
+    PciAddress.Address.Function = FUNC_4;
+    PciAddress.Address.Register = CSTATE_POLICY_CTRL1_REG;
+    OrMask = 0;
+    ((CSTATE_POLICY_CTRL1_REGISTER *) &AndMask)->CstateMsgDis = 0;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F4x128
+
+    // Read F4x128[CoreCstateMode]
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    AndMask = 0xFFFFFFFF;
+    OrMask = 0;
+    // Set D18F3xDC[CacheFlushOnHaltCtl] != 0
+    if ((LocalPciRegister & 0x00000001) == 1) {
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = CPTC2_REG;
+      ((CLK_PWR_TIMING_CTRL2_REGISTER *) &OrMask)->CacheFlushOnHaltCtl = 7;
+      OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F3xDC
+    } else {
+      // Set F4x118[CacheFlushEn] = 1 or 0 (if AM3r2)
+      // Set F4x11C[CacheFlushEn] = 1
+      PciAddress.Address.Register = CSTATE_CTRL1_REG;
+      if (PackageType == PACKAGE_TYPE_AM3r2) {
+        ((CSTATE_CTRL1_REGISTER *) &AndMask)->CacheFlushEnCstAct0 = 0;
+      } else {
+        ((CSTATE_CTRL1_REGISTER *) &OrMask)->CacheFlushEnCstAct0 = 1;
+      }
+      ((CSTATE_CTRL1_REGISTER *) &OrMask)->CacheFlushEnCstAct1 = 1;
+      OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F4x118
+    }
+
+    // Set F3xD4[MTC1eEn] = 1
+    // Set F3xD4[StutterScrubEn] = 1 if scrubbing is enabled
+    // Set F3xD4[CacheFlushImmOnAllHalt] = 1 or 0 (if AM3r2)
+    AndMask = 0xFFFFFFFF;
+    OrMask = 0;
+    ((CLK_PWR_TIMING_CTRL_REGISTER *) &AndMask)->StutterScrubEn = 0;
+    ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->MTC1eEn = 1;
+    ((CLK_PWR_TIMING_CTRL_REGISTER *) &AndMask)->CacheFlushImmOnAllHalt = 0;
+
+    IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+
+    for (Module = 0; Module < (UINT8)GetPlatformNumberOfModules (); Module++) {
+      if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts)) {
+        PciAddress.Address.Function = FUNC_3;
+        PciAddress.Address.Register = CPTC0_REG;
+        if (IsDramScrubberEnabled (PciAddress, StdHeader)) {
+          ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->StutterScrubEn = 1;
+        } else {
+          ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->StutterScrubEn = 0;
+        }
+        LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+        LocalPciRegister &= AndMask;
+        LocalPciRegister |= OrMask;
+        LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      }
+    }
+
+  } else if (EntryPoint == CPU_FEAT_AFTER_PM_INIT) {
+    // At early, this core 0 can launch its subordinate cores.
+    TaskPtr.FuncAddress.PfApTaskI = F15OrInitializeMsgBasedC1eOnCore;
+    TaskPtr.DataTransfer.DataSizeInDwords = 1;
+    TaskPtr.DataTransfer.DataPtr = &PlatformConfig->C1ePlatformData;
+    TaskPtr.DataTransfer.DataTransferFlags = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, NULL);
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable message-based C1e on a family 15h Orochi core.
+ *
+ * @param[in]    BmStsAddress       System I/O address of the bus master status bit.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F15OrInitializeMsgBasedC1eOnCore (
+  IN       VOID              *BmStsAddress,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 LocalMsrRegister;
+
+  LibAmdMsrRead (MSR_INTPEND, &LocalMsrRegister, StdHeader);
+  ((INTPEND_MSR *) &LocalMsrRegister)->BmStsClrOnHltEn = 1;
+  ((INTPEND_MSR *) &LocalMsrRegister)->IntrPndMsgDis = 0;
+  ((INTPEND_MSR *) &LocalMsrRegister)->IntrPndMsg = 0;
+  ((INTPEND_MSR *) &LocalMsrRegister)->IoMsgAddr = (UINT64) *((UINT32 *) BmStsAddress);
+  LibAmdMsrWrite (MSR_INTPEND, &LocalMsrRegister, StdHeader);
+
+  // Set MSRC001_0015[HltXSpCycEn] = 1
+  LibAmdMsrRead (MSR_HWCR, &LocalMsrRegister, StdHeader);
+  LocalMsrRegister |= BIT12;
+  LibAmdMsrWrite (MSR_HWCR, &LocalMsrRegister, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Check to see if the DRAM background scrubbers are enabled or not.
+ *
+ * @param[in]    PciAddress         Address of F15 Orochi socket/module to check.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               Memory scrubbers are enabled on the current node.
+ * @retval       FALSE              Memory scrubbers are disabled on the current node.
+ */
+BOOLEAN
+STATIC
+IsDramScrubberEnabled (
+  IN       PCI_ADDR PciAddress,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 LocalPciRegister;
+
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = 0x58;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  return ((BOOLEAN) ((LocalPciRegister & 0x1F) != 0));
+}
+
+
+CONST MSG_BASED_C1E_FAMILY_SERVICES ROMDATA F15OrMsgBasedC1e =
+{
+  0,
+  F15OrIsMsgBasedC1eSupported,
+  F15OrInitializeMsgBasedC1e
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMsrTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMsrTables.c
new file mode 100644
index 0000000000..b1c09f26e4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMsrTables.c
@@ -0,0 +1,234 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi MSR tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 60740 $   @e \$Date: 2011-10-20 19:47:10 -0600 (Thu, 20 Oct 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "F15PackageType.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORMSRTABLES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+F15OrDisUcodeWorkaroundForErratum671 (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F15OrMsrRegisters[] =
+{
+//  M S R    T a b l e s
+// ----------------------
+
+// MSR_MC4_CTL_MASK (0xC0010048)
+// bit[10] GartTblWkEn = 1
+// bits[22:19] RtryHtEn = 1111b
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_MC4_CTL_MASK,                      // MSR Address
+      0x0000000000780400,                    // OR Mask
+      0x0000000000780400,                    // NAND Mask
+    }}
+  },
+// MSR 0xC0011000
+// bit[16] = 1, Erratum #608 for all OR revisions
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                         // platformFeatures
+    {{
+      0xC0011000,                            // MSR Address
+      0x0000000000010000,                    // OR Mask
+      0x0000000000010000,                    // NAND Mask
+    }}
+  },
+// MSR_CPUID_EXT_FEATS (0xC0011005)
+// bit[56]  PerfCtrExtNB = 1
+// bit[55]  PerfCtrExtCore = 1
+// bit[51]  NodeId = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                         // platformFeatures
+    {{
+      MSR_CPUID_EXT_FEATS,                   // MSR Address
+      0x0188000000000000,                    // OR Mask
+      0x0188000000000000,                    // NAND Mask
+    }}
+  },
+// MSR_OSVW_ID_Length (0xC0010140)
+// bit[15:0] = 4
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_OSVW_ID_Length,                    // MSR Address
+      0x0000000000000004,                    // OR Mask
+      0x000000000000FFFF,                    // NAND Mask
+    }}
+  },
+// MSR_IBS_OP_DATA3 (0xC0011037)
+// bit[16] IbsDcMabHit = 0
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MSR_IBS_OP_DATA3,                      // MSR Address
+      0x0000000000000000,                    // OR Mask
+      0x0000000000010000,                    // NAND Mask
+    }}
+  }
+};
+
+// MSRs with Special Programming Requirements Table
+
+STATIC CONST FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER ROMDATA F15OrAM3MsrWorkarounds[] =
+{
+  // Disable Microcode workaround for Erratum #671
+  {
+    FamSpecificWorkaround,
+    {
+      AMD_FAMILY_15_OR,
+      AMD_F15_OR_B2
+    },
+    {AMD_PF_ALL},
+    {{
+      F15OrDisUcodeWorkaroundForErratum671,
+      0x00000000
+    }}
+  },
+};
+
+
+CONST REGISTER_TABLE ROMDATA F15OrMsrRegisterTable = {
+  AllCores,
+  (sizeof (F15OrMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F15OrMsrRegisters,
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrAM3MsrWorkaroundTable = {
+  AllCores,
+  (sizeof (F15OrAM3MsrWorkarounds) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F15OrAM3MsrWorkarounds,
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * A Family Specific Workaround method, to disable the microcode workaround for Erratum #671
+ *
+ * \@TableTypeFamSpecificInstances.
+ *
+ * @param[in]     Data       The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in]     StdHeader  Config params for library, services.
+ */
+VOID
+F15OrDisUcodeWorkaroundForErratum671 (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT64        MsrData;
+  UINT32        PackageType;
+
+  // Is this processor AM3?
+  PackageType = LibAmdGetPackageType (StdHeader);
+
+  if (PackageType == PACKAGE_TYPE_AM3r2) {
+    // Apply the enhancement.
+    LibAmdMsrRead (0xC0011000, &MsrData, StdHeader);
+    MsrData = (MsrData | BIT17);
+    LibAmdMsrWrite (0xC0011000, &MsrData, StdHeader);
+  }
+}
+
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMultiLinkPciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMultiLinkPciTables.c
new file mode 100644
index 0000000000..0c9290d709
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrMultiLinkPciTables.c
@@ -0,0 +1,749 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi PCI tables from Multi-Link BKDG paragraph recommended settings.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 41897 $   @e \$Date: 2010-11-12 12:39:18 +0800 (Fri, 12 Nov 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+#include "F15PackageType.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORMULTILINKPCITABLES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F15OrMultiLinkPciRegisters[] =
+{
+  // Function 0
+
+// F0x68 - Link Transaction Control
+// bit[14:13], BufRelPri = 01h
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL,                          // CpuRevision  rev C or less.
+    },
+    {AMD_PF_MULTI_LINK},                      // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68),  // Address
+      0x00002000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 0
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 3
+  // 17:16 NpReqData: 3
+  // 15:12 ProbeCmd: 8
+  // 11:8 RspCmd: 9
+  // 7:5 PReq: 2
+  // 4:0 NpReqCmd: 4
+{
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      HT_HOST_FEAT_COHERENT, // link features
+      0x10,                               // address
+      0x008F8944,                         // data
+      0x0FFFFFFF                          // mask
+    }}
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 0
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 1
+  // 17:16 NpReqData: 0
+  // 15:12 ProbeCmd: 0
+  // 11:8 RspCmd: 2
+  // 7:5 PReq: 7
+  // 4:0 NpReqCmd: 14
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (HT_HOST_AND | HT_HOST_FEAT_NONCOHERENT | HT_HOST_FEAT_GANGED), // link features
+      0x10,                               // address
+      0x008402EE,                         // data
+      0x0FFFFFFF                          // mask
+    }}
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 0
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 3
+  // 17:16 NpReqData: 3
+  // 15:12 ProbeCmd: 4
+  // 11:8 RspCmd: 9
+  // 7:5 PReq: 2
+  // 4:0 NpReqCmd: 8
+  {
+    HtHostPerfPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},                    // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,
+      HT_HOST_FEAT_COHERENT,              // link features
+      0x10,                               // address
+      0x008F4948,                         // data
+      0x0FFFFFFF                          // mask
+    }}
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 0
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 0
+  // 18:16 IsocNpReqCmd: 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      HT_HOST_FEAT_COHERENT,              // link features
+      0x14,                               // address
+      0x00010000,                         // data
+      0x1FFF0000                          // mask
+    }}
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 0
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 0
+  // 18:16 IsocNpReqCmd: 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},
+    {{
+      (HT_HOST_AND | HT_HOST_FEAT_NONCOHERENT | HT_HOST_FEAT_GANGED), // Link Features
+      0x14,                                 // Address
+      0x00010000,                           // Data
+      0x1FFF0000                            // Mask
+    }},
+  },
+
+// Function 3 - Misc. Control
+
+// NOTE: Order is important. Do not re-order
+// the entries for F3x140.
+
+// F3x140 - SRI_to_XCS Token Count
+// bits[9:8] UpRspTok = 3
+// bits[23:20] FreeTok = 10
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},                      // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (DEGREE_RANGE_0 (COUNT_RANGE_LOW, 1) | COUNT_RANGE_NONE),     // SCM
+      PACKAGE_TYPE_SCM,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00A00300,                           // regData
+      0x00F00300,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[9:8] UpRspTok = 3
+// bits[23:20] FreeTok = 10
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},                      // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (DEGREE_RANGE_0 (COUNT_RANGE_LOW, 1) | COUNT_RANGE_NONE),     // MCM1 or MCM2h
+      PACKAGE_TYPE_MCM,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00A00300,                           // regData
+      0x00F00300,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[9:8] UpRspTok = 3
+// bits[23:20] FreeTok = 9
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},                      // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,
+      (DEGREE_RANGE_0 (COUNT_RANGE_LOW, 1) | COUNT_RANGE_NONE),     // MCM1 or MCM2h
+      PACKAGE_TYPE_MCM,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00900300,                           // regData
+      0x00F00300,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[9:8] UpRspTok = 1
+// bits[23:20] FreeTok = 11
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (DEGREE_RANGE_0 (3, 3) | COUNT_RANGE_NONE),     // MCM2
+      PACKAGE_TYPE_MCM,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00B00100,                             // regData
+      0x00F00300,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[9:8] UpRspTok = 3
+// bits[23:20] FreeTok = 10
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},                      // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (DEGREE_RANGE_0 (2, 2) | COUNT_RANGE_NONE),     // MCM4h
+      PACKAGE_TYPE_MCM,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00A00300,                           // regData
+      0x00F00300,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[9:8] UpRspTok = 1
+// bits[23:20] FreeTok = 9
+  {
+    TokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      (DEGREE_RANGE_0 (4, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),     // MCM4
+      PACKAGE_TYPE_MCM,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00900100,                           // regData
+      0x00F00300,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 3
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (COUNT_RANGE_ALL | COUNT_RANGE_NONE), // SCM
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000C1AA,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (COUNT_RANGE_LOW, 1) | COUNT_RANGE_NONE), // MCM1 or MCM2h.
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x000001AA,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (IGNORE_PROCESSOR_0 | DEGREE_RANGE_1 (2, 3)),  // MCM2 or MCM4h
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000016A,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 1
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (3, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),  // MCM4
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x00000196,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 1
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 1
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 1
+// bits[19:18] PReqTok1 = 1
+// bits[21:20] RspTok1 = 1
+// bits[23:22] ProbeTok1= 1
+// bits[24] IsocReqTok1 = 0
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (COUNT_RANGE_LOW, 1) | COUNT_RANGE_NONE), // MCM1 or MCM2h.
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_UNGANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x00550155,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+  // F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 1
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 1
+// bits[19:18] PReqTok1 = 1
+// bits[21:20] RspTok1 = 1
+// bits[23:22] ProbeTok1= 1
+// bits[24] IsocReqTok1 = 0
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (COUNT_RANGE_LOW, 1) | COUNT_RANGE_NONE), // MCM1 or MCM2h.
+      PERFORMANCE_PROBEFILTER,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_UNGANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x00550165,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 1
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 1
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 2
+// bits[17:16] ReqTok1 = 1
+// bits[19:18] PReqTok1 = 1
+// bits[21:20] RspTok1 = 1
+// bits[23:22] ProbeTok1= 1
+// bits[24] IsocReqTok1 = 1
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (IGNORE_PROCESSOR_0 | DEGREE_RANGE_1 (3, 3)),     // MCM2
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_UNGANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x01558155,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 1
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 1
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 1
+// bits[19:18] PReqTok1 = 1
+// bits[21:20] RspTok1 = 1
+// bits[23:22] ProbeTok1= 1
+// bits[24] IsocReqTok1 = 1
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 1
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (IGNORE_PROCESSOR_0 | DEGREE_RANGE_1 (2, 2)),     // MCM4h
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_UNGANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x41550155,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 1
+// bits[3:2] PReqTok0 = 1
+// bits[5:4] RspTok0 = 1
+// bits[7:6] ProbeTok0 = 1
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 1
+// bits[19:18] PReqTok1 = 1
+// bits[21:20] RspTok1 = 1
+// bits[23:22] ProbeTok1= 1
+// bits[24] IsocReqTok1 = 1
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (3, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),     // MCM4
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_COHERENT | HT_HOST_FEAT_UNGANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x01550155,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 0
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 3
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (COUNT_RANGE_ALL | COUNT_RANGE_NONE),    //SCM
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_NONCOHERENT  | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000C12A,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 0
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (COUNT_RANGE_LOW, 2) | COUNT_RANGE_NONE), // MCM1 or MCM2h or MCM2 or MCM4h
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_NONCOHERENT  | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000012A,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 2
+// bits[9:8] IsocReqTok0 = 2
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 0
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},  // platformFeatures
+    {{
+      (PROCESSOR_RANGE_0 (3, COUNT_RANGE_HIGH) | COUNT_RANGE_NONE),     // MCM4
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_NONCOHERENT  | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x000002AA,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+  // F3x158 - Link to XCS Token Count Registers
+  // bits [3:0]LnkToXcsDRToken = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_MULTI_LINK},
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x158), // Address
+      0x00000000,
+      0x0000000F
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrMultiLinkPciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F15OrMultiLinkPciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F15OrMultiLinkPciRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPciTables.c
new file mode 100644
index 0000000000..ce07817575
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPciTables.c
@@ -0,0 +1,962 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 59564 $   @e \$Date: 2011-09-26 12:33:51 -0600 (Mon, 26 Sep 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORPCITABLES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F15OrPciRegisters[] =
+{
+// F0x68 - Link Transaction Control
+// bit[11]   , RespPassPW = 1
+// bits[14:13], BufRelPri = 1
+// bit[19:17], for 8bit APIC config
+// bit[22:21], DsNpReqLmt = 10b
+// bit [25] CHtExtAddrEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68),  // Address
+      0x024E2800,                           // regData
+      0x026E6800,                           // regMask
+    }}
+  },
+// F0x6C - Link Initialization Control
+// bit[23] TxSSBusPwrSaveEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x6C),  // Address
+      0x00800000,                           // regData
+      0x00800000,                           // regMask
+    }}
+  },
+// F0x[E4,A4,C4,84] Link Control Register
+// bit [15] Addr64bitEn = 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+   },
+    {AMD_PF_ALL},
+    {{
+      HT_HOST_FEAT_NONCOHERENT,
+      0x4,
+      0x00008000,
+      0x00008000,
+    }}
+  },
+// F0x[E4,C4,A4,84] - Link 0 Control Register
+// bit[13] LdtStopTriEn = 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HT_HOST_FEATURES_ALL,                 // link feats
+      0x04,                                 // Address
+      0x00002000,                           // regData
+      0x00002000,                           // regMask
+    }}
+  },
+// F0x[E4,C4,A4,84] - Link 0 Control Register
+// bit [12] IsocEn = 0 default
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    { (AMD_PF_NFCM | AMD_PF_UMA) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // link feats
+      0x04,                                 // Address
+      0x00000000,                           // regData
+      0x00001000,                           // regMask
+    }}
+  },
+// F0x[E4,C4,A4,84] - Link 0 Control Register
+// bit [12] IsocEn = 1 for Isochronous control flow modes.
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    { (AMD_PF_UMA_IFCM | AMD_PF_IFCM | AMD_PF_IOMMU) },
+    {{
+      HT_HOST_FEATURES_ALL,                 // link feats
+      0x04,                                 // Address
+      0x00001000,                           // regData
+      0x00001000,                           // regMask
+    }}
+  },
+// F0x[F0,D0,B0,90] - Link Base Channel Buffer Count
+// bit[31] LockBc = 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      HT_HOST_FEATURES_ALL,                 // link feats
+      0x10,                                 // Address
+      0x80000000,                           // regData
+      0x80000000,                           // regMask
+    }}
+  },
+// F0x150 - Link Global Retry Control Register
+// bit[18:16] TotalRetryAttempts = 7
+// bit[13] HtRetryCrcDatInsDynEn = 1
+// bit[12]HtRetryCrcCmdPackDynEn = 1
+// bit[11:9] HtRetryCrcDatIns = leave default reset value (erratum #600)
+// bit[8] HtRetryCrcCmdPack = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x150), // Address
+      0x00073100,                           // regData
+      0x00073100,                           // regMask
+    }}
+  },
+// F0x16C - Link Global Extended Control Register
+// bit[22:17] FullT0Time = 0x33
+// bit[15:13] ForceFullT0 = 7
+// bit[7:6] InLnSt = 01b (PHY_OFF)
+// bit[5:0] T0Time = 0x26
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x16C), // Address
+      0x0066E066,                           // regData
+      0x007EE0FF,                           // regMask
+    }}
+  },
+// F0x[18C:170] - Link Extended Control Register - All connected links.
+// bit[8] LS2En = 1
+  {
+    HtLinkPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platform Features
+    {{
+      HT_HOST_FEATURES_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x170), // Address
+      0x00000100,                           // regData
+      0x00000100,                           // regMask
+    }}
+  },
+// F2x1B0 - Extended Memory Controller Configuration Low
+// bits[10:8], CohPrefPrbLmt = 0
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                        // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,              // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x1B0), // Address
+      0x00000000,                           // regData
+      0x00000700,                           // regMask
+    }}
+  },
+// Function 3 - Misc. Control
+
+// F3x40 - MCA NB Control
+//
+// bit[8], MstrAbrtEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x40),  // Address
+      0x00000100,                           // regData
+      0x00000100,                           // regMask
+    }}
+  },
+// F3x44 - MCA NB Configuration
+// bit[30]  SyncOnDramAdrParErrEn = 1
+// bit[27]  NB MCA to Master CPU Enable = 1
+// bit[25]  DisPciCfgCpuErrRsp = 1
+// bit[21]  SyncFloodOnAnyUcErr = 1
+// bit[20]  SyncOnWDTEn = 1
+// bit[6]   CpuErrDis = 1
+// bit[4]   SyncPktPropDis = 0
+// bit[3]   SyncPktGenDis = 0
+// bit[2]   SyncOnUcEccEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x44),  // Address
+      0x4A300044,                           // regData
+      0x4A30005C,                           // regMask
+    }}
+  },
+// F3x70 - SRI_to_XBAR Command Buffer Count
+// bits[30:28] IsocRspCBC = 1
+// bits[26:24] IsocPreqCBC = 0
+// bits[22:20] IsocReqCBC = 1
+// bits[18:16] UpRspCBC = 7
+// bits[14:12] DnPreqCBC = 1
+// bits[10:8]  UpPreqCBC = 1
+// bits[7:6]   DnRspCBC = 1
+// bits[5:4]   DnReqCBC = 1
+// bits[2:0]   UpReqCBC = 5
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x70),  // Address
+      0x10171155,                           // regData
+      0x777777F7,                           // regMask
+    }}
+  },
+// F3x74 - XBAR_to_SRI Command Buffer Count
+// bits[31:28] DRReqCBC = 0
+// bits[26:24] IsocPreqCBC = 0
+// bits[23:20] IsocReqCBC = 1
+// bits[19:16] ProbeCBC = 7
+// bits[14:12] DnPreqCBC = 2
+// bits[10:8]  UpPreqCBC = 1
+// bits[6:4]   DnReqCBC = 1
+// bits[2:0]   UpReqCBC = 1
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,                 // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74),  // Address
+      0x00172111,                           // regData
+      0xF7FF7777,                           // regMask
+    }}
+  },
+// F3x78 - MCT to XBAR Buffer Count
+// bits[12:8]  ProbeCBC = 0Eh
+// bits[4:0]   RspCBC = 12h
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,              // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x78),  // Address
+      0x00000E12,                           // regData
+      0x00001F1F,                           // regMask
+    }}
+  },
+// F3x78 - MCT to XBAR Buffer Count
+// bits[12:8]  ProbeCBC = 0Ch
+// bits[4:0]   RspCBC = 14h
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,              // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x78),  // Address
+      0x00000C14,                           // regData
+      0x00001F1F,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[26:23] SrqExtFreeListBC = 8
+// bits[22:20] Sri2XbarFreeRspDBC = 0
+// bits[19:16] Sri2XbarFreeXreqDBC = 0xD
+// bits[15:12] Sri2XbarFreeRspCBC = 0
+// bits[11:8]  Sri2XbarFreeXreqCBC = 0xF
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),  // Address
+      0x040D0F00,                           // regData
+      0x07FFFF00,                           // regMask
+    }}
+  },
+// F3x7C - Free List Buffer Count
+// bits[4:0]   Xbar2SriFreeListCBC = 0x16
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,                 // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C),               // Address
+      0x00000016,                           // regData
+      0x0000001F,                           // regMask
+    }}
+  },
+// F3x80 - ACPI Power State Control
+// ACPI State C2
+// bit[0] CpuPrbEn = 1
+// bit[1] NbLowPwrEn = 0
+// bit[2] NbGateEn = 0
+// bits[7:5] ClkDivisor = 4
+// ACPI State C3, C1E or Link init
+// bit[0] CpuPrbEn = 0
+// bit[1] NbLowPwrEn = 1
+// bit[2] NbGateEn = 0
+// bit[3] NbCofChg = 0
+// bit[4] Reserved = 0
+// bits[7:5] ClkDivisor = 7
+// NB P-state changes
+// bit[0] CpuPrbEn = 1
+// bit[1] NbLowPwrEn = 1
+// bit[2] NbGateEn = 0
+// bit[3] NbCofChg = 1
+// bit[4] Reserved = 0
+// bits[7:5] ClkDivisor = 0
+// S1
+// bit[0] CpuPrbEn = 0
+// bit[1] NbLowPwrEn = 1
+// bit[2] NbGateEn = 0
+// bit[3] NbCofChg = 0
+// bit[4] Reserved = 0
+// bits[7:5] ClkDivisor = 7
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                        // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x80),  // Address
+      0xE20BE281,                           // regData
+      0xFFFFFFE7,                           // regMask
+    }}
+  },
+// F3x84 - ACPI Power State Control
+// ACPI State S3
+// bit[0] CpuPrbEn = 0
+// bit[1] NbLowPwrEn = 1
+// bit[2] NbGateEn = 0
+// bit[3] NbCofChg = 0
+// bit[4] Reserved = 0
+// bits[7:5] ClkDivisor = 7
+// ACPI State S4/S5
+// bit[0] CpuPrbEn = 0
+// bit[1] NbLowPwrEn = 1
+// bit[2] NbGateEn = 0
+// bit[3] NbCofChg = 0
+// bit[4] Reserved = 0
+// bits[7:5] ClkDivisor = 7
+// ACPI State C1
+// bit[0] CpuPrbEn = 0
+// bit[1] NbLowPwrEn = 0
+// bit[2] NbGateEn = 0
+// bit[3] NbCofChg = 0
+// bit[4] Reserved = 0
+// bits[7:5] ClkDivisor = 7
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x84),  // Address
+      0xE0E200E2,                           // regData
+      0xEFFF00FF,                           // regMask
+    }}
+  },
+// F3x84 - ACPI Power State Control
+// ACPI State C1
+// bits[0] CpuPrbEn = 0
+// bits[1] NbLowPwrEn = 0
+// bits[2] NbGateEn = 0
+// bits[7:5] ClkDivisor = 4
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_SINGLE_CORE},                   // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x84),  // Address
+      0x80000000,                           // regData
+      0xE7000000,                           // regMask
+    }}
+  },
+// F3x90 - GART Aperture Control
+// bit[6] = DisGartTblWlkPrb, Erratum 540
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                        // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x90),  // Address
+      0x00000040,                           // regData
+      0x00000040,                           // regMask
+    }}
+  },
+// F3xA0 - Power Control Miscellaneous
+// bit[9] SviHighFreqSel = 1, if PERFORMANCE_VRM_HIGH_SPEED_ENABLE == TRUE
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                        // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platformFeatures
+    {{
+      PERFORMANCE_VRM_HIGH_SPEED_ENABLE,    // PerformanceFeatures
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0),  // Address
+      0x00000200,                           // regData
+      0x00000200,                           // regMask
+    }}
+  },
+// F3xD4 - Clock Power Timing Control 0
+// bits[11:8] ClkRampHystSel = 0xF
+// bits[15] StutterScrubEn = 0
+// bits[14] CacheFlushImmOnAllHalt = 0
+// bits[13] MTC1eEn = 0
+// bits[17:16] LnkPllLock = 1
+// bits[30:28] NbClkDiv = 4
+// bits[31] NbClkDivApplyAll = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xD4),  // Address
+      0xC0010F00,                           // regData
+      0xF003EF00,                           // regMask
+    }}
+  },
+// F3xD8 - Clock Power Timing Control 1
+// bits[6:4]   VSRampSlamTime = 1
+// bits[27:24] ReConDel = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xD8),  // Address
+      0x03000010,                           // regData
+      0x0F000070,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[1:0]   UpReqTok = 1
+// bits[3:2]   DnReqTok = 1
+// bits[5:4]   UpPreqTok = 1
+// bits[7:6]   DnPreqTok = 1
+// bits[11:10] DnRspTok = 1
+// bits[13:12] IsocReqTok = 1
+// bits[15:14] IsocPreqTok = 0
+// bits[17:16] IsocRspTok = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00011455,                           // regData
+      0x0003FCFF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 5
+// bits[7:4] ProbeTok = 5
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_PROFILE_ALL,
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000055,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x144 - MCT to XCS Token Count
+// bits[3:0] RspTok = 8
+// bits[7:4] ProbeTok = 2
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_PROBEFILTER,              // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+      0x00000028,                           // regData
+      0x000000FF,                           // regMask
+    }}
+  },
+// F3x160 - NB Machine Check Misc 0
+// bits[23:20] LvtOffset = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x160), // Address
+      0x00100000,                           // regData
+      0x00F00000,                           // regMask
+    }}
+  },
+// F3x168 - NB Machine Check Misc 1
+// bits[23:20] LvtOffset = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x168), // Address
+      0x00100000,                           // regData
+      0x00F00000,                           // regMask
+    }}
+  },
+// F3x170 - NB Machine Check Misc 2
+// bits[23:20] LvtOffset = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x170), // Address
+      0x00100000,                           // regData
+      0x00F00000,                           // regMask
+    }}
+  },
+// F3x180 - NB Extended Configuration
+// bit[1]  SyncFloodOnUsPwDatErr = 1
+// bit[5]  DisPciCfgCpuMstAbtRsp = 1
+// bit[6]  SyncFloodOnDatErr = 1
+// bit[7]  SyncFloodOnTgtAbtErr = 1
+// bit[8]  SyncFloodOnHtProtEn = 1
+// bit[9]  SyncOnUCNbAryEn = 1
+// bit[20] SyncFloodOnL3LeakErr = 1
+// bit[21] SyncFloodOnCpuLeakErr = 1
+// bit[22] SyncFloodOnTblWalkErr = 1
+// bit[24] McaLogErrAddrWdtErr = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x180), // Address
+      0x017003E2,                           // regData
+      0x017003E2,                           // regMask
+    }}
+  },
+// F3x188 - NB Configuration 2 Register
+// bit[9]  DisL3HiPriFreeListAlloc = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                        // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x188), // Address
+      0x00000200,                           // regData
+      0x00000200,                           // regMask
+    }}
+  },
+// F3x1A0 - L3 Buffer Count
+// bits[17:16] CpuToNbFreeBufCnt = 3
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,                 // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1A0), // Address
+      0x00030000,                           // regData
+      0x00030000,                           // regMask
+    }}
+  },
+// F3x1B8 - L3 Control 1
+// bit[12] L3PrivReplEn = 1
+// bit[18] Reserved = 1, Erratum #504
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,                 // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1B8), // Address
+      0x00041000,                           // regData
+      0x00041000,                           // regMask
+    }}
+  },
+// F3x1E4 - SBI Control
+// bits[11:8] LvtOffset = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1E4), // Address
+      0x00000300,                           // regData
+      0x00000F00,                           // regMask
+    }}
+  },
+// F4x104 - TDP Accumulator Divisor Control
+// bits[1:0] TdpAccDivVal = 1
+// bits[13:2] TdpAccDivRate = 0x0C8
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x104), // Address
+      0x00000321,                           // regData
+      0x00003FFF,                           // regMask
+    }}
+  },
+// F4x110 - Sample and Residency Timer
+// bits[11:0] CSampleTimer = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x110), // Address
+      0x00000001,                           // regData
+      0x00000FFF,                           // regMask
+    }}
+  },
+// F4x118 - C-state Control 1
+// bit [0]     CpuPrbEnCstAct0 = 0
+// bit [1]     CacheFlushEnCstAct0 = 0
+// bits[3:2]   CacheFlushTmrSelCstAct0 = 0
+// bits[7:5]   ClkDivisorCstAct0 = 0
+// bit [8]     PwrGateEnCstAct0 = 0
+// bit [16]    CpuPrbEnCstAct1 = 0
+// bit [17]    CacheFlushEnCstAct1 = 0
+// bits[19:18] CacheFlushTmrSelCstAct1 = 0
+// bits[23:21] ClkDivisorCstAct1 = 0
+// bit [24]    PwrGateEnCstAct1 = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x118), // Address
+      0x00000000,                           // regData
+      0x01EF01EF,                           // regMask
+    }}
+  },
+// F4x11C - C-state Control 2
+// bit [0]     CpuPrbEnCstAct2 = 0
+// bit [1]     CacheFlushEnCstAct2 = 0
+// bits[3:2]   CacheFlushTmrSelCstAct2 = 0
+// bits[7:5]   ClkDivisorCstAct2 = 0
+// bit [8]     PwrGateEnCstAct2 = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x11C), // Address
+      0x00000000,                           // regData
+      0x000001EF,                           // regMask
+    }}
+  },
+// F4x128 - C-state Policy Control 1
+// bits[20:18] CacheFlushSucMonThreshold = 4
+// bits[11:5]  CacheFlushTmr = 0x28
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x128), // Address
+      0x00100500,                           // regData
+      0x001C0FE0,                           // regMask
+    }}
+  },
+// F4x16C - APM TDP Control
+// bit[4] ApmTdpLimitIntEn = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x16C), // Address
+      0x00000010,                           // regData
+      0x00000010,                           // regMask
+    }}
+  },
+// F4x1C4 - L3 Power Control Register
+// bits[8] L3PwrSavEn = 1
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      PERFORMANCE_L3_CACHE,                 // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x1C4), // Address
+      0x00000100,                           // regData
+      0x00000100,                           // regMask
+    }}
+  },
+// F4x1CC - L3 Control 2
+// bit[4]    ImplRdAnySubUnavail = 1
+// bits[8:6] ImplRdProjDelayThresh = 2
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x1CC), // Address
+      0x00000090,                           // regData
+      0x000001D0,                           // regMask
+    }}
+  },
+// F5x88 - Northbridge Configuration 4
+// bit[5] Reserved, BIOS must set
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      0x04,                                 // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_5, 0x88),  // Address
+      0x00000020,                           // regData
+      0x00000020,                           // regMask
+    }}
+  },
+// F5x88 - Northbridge Configuration 4
+// bit[14] Reserved, BIOS must set
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_Bx                       // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_5, 0x88),  // Address
+      0x00004000,                           // regData
+      0x00004000,                           // regMask
+    }}
+  },
+// F5xE0 - Processor TDP Running Average
+// bits[3:0] RunAvgRange = 0xE
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_5, 0xE0), // Address
+      0x0000000E,                           // regData
+      0x0000000F,                           // regMask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrPciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F15OrPciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F15OrPciRegisters,
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPmNbCofVidInit.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPmNbCofVidInit.c
new file mode 100644
index 0000000000..b339d2d983
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPmNbCofVidInit.c
@@ -0,0 +1,317 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi NB COF VID Initialization
+ *
+ * Performs the "BIOS Northbridge COF and VID Configuration" as
+ * described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 51891 $   @e \$Date: 2011-04-28 12:39:55 -0600 (Thu, 28 Apr 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "cpuApicUtilities.h"
+#include "OptionMultiSocket.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "F15OrPmNbCofVidInit.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORPMNBCOFVIDINIT_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F15OrPmNbCofVidInitOnCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 15h Orochi core 0 entry point for performing the "Mixed Northbridge Frequency
+ * Configuration Sequence"
+ *
+ * BIOS must match F5x1[6C:60][NbFid, NbDid, NbPstateEn] between all
+ * processors of a multi-socket system.  The lowest setting from all
+ * processors is used as the common F5x1[6C:60][NbFid, NbDid].  All
+ * processors must have the same number of NB P-states.
+ *
+ * For each node in the system {
+ *   For (i = 0; i <= F5x170[NbPstateMaxVal]; i++) {
+ *     NewNbFreq = the lowest NBCOF from all processors for NB P-state i
+ *     NewNbFid = F5x1[6C:60][NbFid] that corresponds to NewNbFreq
+ *     NewNbDid = F5x1[6C:60][NbDid] that corresponds to NewNbFreq
+ *     Write NewNbFid and NewNbDid to F5x1[6C:60][NbFid, NbDid] indexed
+ *       by NB P-state i
+ *   }
+ *   If (F5x170[NbPstateMaxVal] == 0) {
+ *     Save F5x170 and F5x1[6C:60] indexed by NB P-state 1
+ *     Copy F5x1[6C:60] indexed by NB P-state 0 to F5x1[6C:60] indexed by NB P-state 1
+ *     Write 1 to F5x170[NbPstateMaxVal, NbPstateLo]
+ *     Write 0 to F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold]
+ *     Wait for F5x174[CurNbPstate] = F5x170[NbPstateLo] and F5x174[CurNbFid, CurNb-
+ *       Did]=[NbFid, NbDid] from F5x1[6C:60] indexed by F5x170[NbPstateLo]
+ *     Restore F5x170 and F5x1[6C:60] indexed by NB P-state 1
+ *     Wait for F5x174[CurNbPstate] = F5x170[NbPstateHi]
+ *   }
+ * }
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParamsPtr       Service related parameters (unused).
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F15OrPmNbCofVidInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT32        Socket;
+  UINT32        Module;
+  UINT32        Core;
+  UINT32        i;
+  UINT32        NbFreq;
+  UINT32        NbDiv;
+  UINT32        LocalPciRegister;
+  UINT32        AndMask;
+  UINT32        OrMask;
+  UINT32        Ignored;
+  UINT32        NbPsCtrl;
+  UINT32        TaskedCore;
+  BOOLEAN       PstateSettingsChanged;
+  BOOLEAN       PstatesMatch;
+  BOOLEAN       PstateEnabledAll;
+  AP_TASK       TaskPtr;
+  PCI_ADDR      PciAddress;
+  AGESA_STATUS  IgnoredSts;
+
+  // Get the local node ID
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+
+  ASSERT (Core == 0);
+
+  PstateSettingsChanged = FALSE;
+  GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+  PciAddress.Address.Function = FUNC_5;
+  PciAddress.Address.Register = NB_PSTATE_CTRL;
+  LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+  for (i = 0; i <= ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateMaxVal; i++) {
+    if (OptionMultiSocketConfiguration.GetSystemNbPstateSettings (i, &CpuEarlyParamsPtr->PlatformConfig, &NbFreq, &NbDiv, &PstatesMatch, &PstateEnabledAll, StdHeader)) {
+      if (PstateEnabledAll) {
+        // Valid system-wide NB P-state
+        if (!PstatesMatch) {
+          // Configure NbPstate[i] to match the slowest
+          PciAddress.Address.Register = (NB_PSTATE_0 + (4 * i));
+          LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+          OrMask = 0x00000000;
+          ((NB_PSTATE_REGISTER *) &OrMask)->NbFid = ((NbFreq / 200) - 4);
+          ((NB_PSTATE_REGISTER *) &OrMask)->NbDid = (UINT32) LibAmdBitScanForward (NbDiv);
+          if ((((NB_PSTATE_REGISTER *) &OrMask)->NbFid != ((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbFid) ||
+              (((NB_PSTATE_REGISTER *) &OrMask)->NbDid != ((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbDid)) {
+            AndMask = 0xFFFFFFFF;
+            ((NB_PSTATE_REGISTER *) &AndMask)->NbFid = 0;
+            ((NB_PSTATE_REGISTER *) &AndMask)->NbDid = 0;
+            OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+            PstateSettingsChanged = TRUE;
+          }
+        }
+      } else {
+        // At least one processor in the system does not have NbPstate[i]
+        PciAddress.Address.Register = NB_PSTATE_CTRL;
+        AndMask = 0xFFFFFFFF;
+        ((NB_PSTATE_CTRL_REGISTER *) &AndMask)->NbPstateMaxVal = 0;
+        OrMask = 0;
+        if (i != 0) {
+          ((NB_PSTATE_CTRL_REGISTER *) &OrMask)->NbPstateMaxVal = (i - 1);
+        }
+        // Modify NbPstateMaxVal to reflect the system value
+        OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+
+        // Disable this NB P-state
+        PciAddress.Address.Register = (NB_PSTATE_0 + (4 * i));
+        AndMask = 0xFFFFFFFF;
+        ((NB_PSTATE_REGISTER *) &AndMask)->NbPstateEn = 0;
+        OrMask = 0;
+        OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+
+        // Log error for the invalid configuration
+        PutEventLog (AGESA_ERROR,
+                     CPU_ERROR_PM_NB_PSTATE_MISMATCH,
+                     Socket, i, 0, 0, StdHeader);
+        break;
+      }
+    }
+  }
+
+  if (PstateSettingsChanged) {
+    PciAddress.Address.Register = NB_PSTATE_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+    if (((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateMaxVal == 0) {
+      // Launch one core per node.
+      TaskPtr.FuncAddress.PfApTask = F15OrPmNbCofVidInitOnCore;
+      TaskPtr.DataTransfer.DataSizeInDwords = 0;
+      TaskPtr.ExeFlags = WAIT_FOR_CORE;
+      for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+        if (GetGivenModuleCoreRange (Socket, Module, &TaskedCore, &Ignored, StdHeader)) {
+          if (TaskedCore != 0) {
+            ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) TaskedCore, &TaskPtr, StdHeader);
+          }
+        }
+      }
+      ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, (VOID *) CpuEarlyParamsPtr);
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F15OrPmNbCofVidInit to perform the actual NB P-state transition
+ * to the leveled NB P-state settings on one core of each die in a family 15h socket.
+ *
+ * The following steps are performed:
+ *   1. Save F5x170 and F5x1[6C:60] indexed by NB P-state 1
+ *   2. Copy F5x1[6C:60] indexed by NB P-state 0 to F5x1[6C:60] indexed by NB P-state 1
+ *   3, Write 1 to F5x170[NbPstateMaxVal, NbPstateLo]
+ *   4. Write 0 to F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold]
+ *   5. Wait for F5x174[CurNbPstate] = F5x170[NbPstateLo] and F5x174[CurNbFid, CurNb-
+ *      Did]=[NbFid, NbDid] from F5x1[6C:60] indexed by F5x170[NbPstateLo]
+ *   6. Restore F5x170 and F5x1[6C:60] indexed by NB P-state 1
+ *   7. Wait for F5x174[CurNbPstate] = F5x170[NbPstateHi]
+ *
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F15OrPmNbCofVidInitOnCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32        NbPsCtrl;
+  UINT32        NbPs0;
+  UINT32        NbPs1;
+  UINT32        LocalPciRegister;
+  PCI_ADDR      PciAddress;
+
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+
+  // Save F5x170 and F5x164
+  PciAddress.Address.Function = FUNC_5;
+  PciAddress.Address.Register = NB_PSTATE_CTRL;
+  LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+
+  PciAddress.Address.Register = NB_PSTATE_0;
+  LibAmdPciRead (AccessWidth32, PciAddress, &NbPs0, StdHeader);
+  PciAddress.Address.Register = NB_PSTATE_1;
+  LibAmdPciRead (AccessWidth32, PciAddress, &NbPs1, StdHeader);
+
+  // Copy F5x160 to F5x164
+  LibAmdPciWrite (AccessWidth32, PciAddress, &NbPs0, StdHeader);
+
+  // Write 1 to F5x170[NbPstateMaxVal, NbPstateLo]
+  PciAddress.Address.Register = NB_PSTATE_CTRL;
+  LocalPciRegister = NbPsCtrl;
+  ((NB_PSTATE_CTRL_REGISTER *) &LocalPciRegister)->NbPstateMaxVal = 1;
+  ((NB_PSTATE_CTRL_REGISTER *) &LocalPciRegister)->NbPstateLo = 1;
+  LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+  // Write 0 to F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold]
+  ((NB_PSTATE_CTRL_REGISTER *) &LocalPciRegister)->SwNbPstateLoDis = 0;
+  ((NB_PSTATE_CTRL_REGISTER *) &LocalPciRegister)->NbPstateDisOnP0 = 0;
+  ((NB_PSTATE_CTRL_REGISTER *) &LocalPciRegister)->NbPstateThreshold = 0;
+  LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+  // Wait for F5x174[CurNbPstate] = F5x170[NbPstateLo] (written to 1 above) and
+  // F5x174[CurNbFid, CurNbDid] = F5x164[NbFid, NbDid]
+  PciAddress.Address.Register = NB_PSTATE_STATUS;
+  do {
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  } while ((((NB_PSTATE_STS_REGISTER *) &LocalPciRegister)->CurNbPstate != 1) &&
+           (((NB_PSTATE_STS_REGISTER *) &LocalPciRegister)->CurNbFid != ((NB_PSTATE_REGISTER *) &NbPs0)->NbFid) &&
+           (((NB_PSTATE_STS_REGISTER *) &LocalPciRegister)->CurNbDid != ((NB_PSTATE_REGISTER *) &NbPs0)->NbDid));
+
+  // Restore F5x170 and F5x164
+  PciAddress.Address.Register = NB_PSTATE_CTRL;
+  LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+  PciAddress.Address.Register = NB_PSTATE_1;
+  LibAmdPciWrite (AccessWidth32, PciAddress, &NbPs1, StdHeader);
+
+  // Wait for F5x174[CurNbPstate] = F5x170[NbPstateHi]
+  PciAddress.Address.Register = NB_PSTATE_STATUS;
+  do {
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  } while (((NB_PSTATE_STS_REGISTER *) &LocalPciRegister)->CurNbPstate != ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateHi);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPmNbCofVidInit.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPmNbCofVidInit.h
new file mode 100644
index 0000000000..69652474df
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPmNbCofVidInit.h
@@ -0,0 +1,77 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi NB COF VID Initialization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F15_OR_PM_NB_COF_VID_INIT_H_
+#define _CPU_F15_OR_PM_NB_COF_VID_INIT_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F15OrPmNbCofVidInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F15_OR_PM_NB_COF_VID_INIT_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPowerMgmtSystemTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPowerMgmtSystemTables.c
new file mode 100644
index 0000000000..7cc2e82dce
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPowerMgmtSystemTables.c
@@ -0,0 +1,177 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Models 0x00 - 0x0F Power Management related initialization table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPowerMgmtSystemTables.h"
+#include "cpuF15OrCoreAfterReset.h"
+#include "cpuF15OrNbAfterReset.h"
+#include "cpuF15OrSoftwareThermal.h"
+#include "F15OrPowerPlane.h"
+#include "cpuF15PowerCheck.h"
+#include "F15OrPmNbCofVidInit.h"
+#include "F15OrUtilities.h"
+
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORPOWERMGMTSYSTEMTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF15OrSysPmTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **SysPmTblPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*  Family 15h Only Table */
+/* ---------------------- */
+CONST SYS_PM_TBL_STEP ROMDATA CpuF15OrSysPmTableArray[] =
+{
+
+  IDS_INITIAL_F15_OR_PM_STEP
+
+  // Step 1 - Configure F3x[84:80].  Handled by PCI register table.
+  // Step 2 - Power Plane Initialization
+  //   Execute both cold & warm
+  {
+    0,                                                // ExeFlags
+    F15OrPmPwrPlaneInit                               // Function Pointer
+  },
+
+  // Step x - Disable NB Pstate, if required
+  //   Execute both cold & warm
+  {
+    0,                                                // ExeFlags
+    F15OrNbPstateDis                                  // Function Pointer
+  },
+
+  // Step 3 - Configure Northbridge COF and VID.
+  //   Execute only after warm reset
+  {
+    PM_EXEFLAGS_WARM_ONLY,                            // ExeFlags
+    F15OrPmNbCofVidInit                               // Function Pointer
+  },
+
+  // Step 4 - Core Minimum P-state Transition Sequence After Warm Reset
+  //   Execute only after warm reset
+  {
+    PM_EXEFLAGS_WARM_ONLY,                            // ExeFlags
+    F15OrPmCoreAfterReset                             // Function Pointer
+  },
+
+  // Step 5 - NB COF and VID Transition Sequence After Warm Reset
+  //   Execute only after warm reset
+  {
+    PM_EXEFLAGS_WARM_ONLY,                            // ExeFlags
+    F15OrPmNbAfterReset                               // Function Pointer
+  },
+
+  // Step 6 - Power Check
+  //   Execute only after warm reset
+  {
+    PM_EXEFLAGS_WARM_ONLY,                            // ExeFlags
+    F15PmPwrCheck                                     // Function Pointer
+  },
+
+  // Step 7 - Software Thermal Control Init
+  //   Execute only after warm reset
+  {
+    PM_EXEFLAGS_WARM_ONLY,                            // ExeFlags
+    F15OrPmThermalInit                                // Function Pointer
+  }
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the appropriate table of steps to perform to initialize the power management
+ *  subsystem.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  SysPmTblPtr              Points to the first entry in the table.
+ *  @param[out]  NumberOfElements         Number of valid entries in the table.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF15OrSysPmTable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **SysPmTblPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = (sizeof (CpuF15OrSysPmTableArray) / sizeof (SYS_PM_TBL_STEP));
+  *SysPmTblPtr = CpuF15OrSysPmTableArray;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPowerPlane.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPowerPlane.c
new file mode 100644
index 0000000000..317f9d62ad
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPowerPlane.c
@@ -0,0 +1,236 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Models 0x00 - 0x0F Power Plane Initialization
+ *
+ * Performs the "BIOS Requirements for Power Plane Initialization" as described
+ * in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "Table.h"
+#include "OptionMultiSocket.h"
+#include "F15OrPowerPlane.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORPOWERPLANE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F15OrPmVrmLowPowerModeEnable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       PCI_ADDR              PciAddress,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 15h core 0 entry point for performing power plane initialization.
+ *
+ * The steps are as follows:
+ *    1. Configure D18F3xD8[VSRampSlamTime] based on platform
+ *       requirements.
+ *    2. Configure F3xD4[PowerStepUp & PowerStepDown]
+ *    3. Optionally configure F3xA0[PsiVidEn & PsiVid]
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParams          Service parameters
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F15OrPmPwrPlaneInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  PCI_ADDR  PciAddress;
+  UINT32    Core;
+  UINT32    LocalPciRegister;
+  UINT32    AndMask;
+  UINT32    OrMask;
+  PLATFORM_FEATS  Features;
+
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+  GetCurrentCore (&Core, StdHeader);
+  ASSERT (Core == 0);
+
+  // Configure D18F3xD8[VSRampSlamTime] based on platform requirements.
+  // Before characterization has taken place, no calculations are necessary.
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = CPTC1_REG;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  OrMask = 0x00000000;
+  AndMask = 0xFFFFFFFF;
+  ((CLK_PWR_TIMING_CTRL1_REGISTER *) &OrMask)->VSRampSlamTime = 1;
+  OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+
+  // Configure PowerStepUp/PowerStepDown
+  PciAddress.Address.Register = CPTC0_REG;
+  AndMask = 0xFFFFFFFF;
+  ((CLK_PWR_TIMING_CTRL_REGISTER *) &AndMask)->PowerStepUp = 0;
+  ((CLK_PWR_TIMING_CTRL_REGISTER *) &AndMask)->PowerStepDown = 0;
+  OrMask = 0x00000000;
+  Features.PlatformValue = 0;
+  GetPlatformFeatures (&Features, &CpuEarlyParams->PlatformConfig, StdHeader);
+  if (Features.PlatformFeatures.PlatformSingleLink == 1) {
+    ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->PowerStepUp = 8;
+    ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->PowerStepDown = 8;
+  } else {
+    ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->PowerStepUp = 3;
+    ((CLK_PWR_TIMING_CTRL_REGISTER *) &OrMask)->PowerStepDown = 3;
+  }
+  OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+
+  if (IsWarmReset (StdHeader)) {
+    // Configure PsiVid
+    F15OrPmVrmLowPowerModeEnable (FamilySpecificServices, CpuEarlyParams, PciAddress, StdHeader);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Sets up PSI_L operation.
+ *
+ * This function implements the LowPowerThreshold parameter.
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParams          Contains VrmLowPowerThreshold parameter.
+ * @param[in]  PciAddress              Segment, bus, device number of the node to transition.
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F15OrPmVrmLowPowerModeEnable (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       PCI_ADDR              PciAddress,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT32    Pstate;
+  UINT32    PstateCurrent;
+  UINT32    NextPstateCurrent;
+  UINT32    AndMask;
+  UINT32    OrMask;
+  UINT32    PreviousVID;
+  UINT32    PstateVID;
+  UINT32    HwPsMaxVal;
+  UINT64    PstateMsr;
+  BOOLEAN   EnablePsi;
+
+  if (CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].LowPowerThreshold != 0) {
+    EnablePsi = FALSE;
+    PreviousVID = 0x7F;           // Initialize to invalid zero volt VID code
+    PstateVID = 0x7F;
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = CPTC2_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &HwPsMaxVal, StdHeader);
+
+    for (Pstate = 0; Pstate <= (UINT32) ((CLK_PWR_TIMING_CTRL2_REGISTER *) &HwPsMaxVal)->PstateMaxVal; Pstate++) {
+      if (FamilySpecificServices->GetProcIddMax (FamilySpecificServices, (UINT8) Pstate, &PstateCurrent, StdHeader)) {
+        LibAmdMsrRead ((UINT32) (Pstate + PS_REG_BASE), &PstateMsr, StdHeader);
+        PstateVID = (UINT32) (((PSTATE_MSR *) &PstateMsr)->CpuVid);
+        if ((Pstate + 1) > (UINT32) ((CLK_PWR_TIMING_CTRL2_REGISTER *) &HwPsMaxVal)->PstateMaxVal) {
+          NextPstateCurrent = 0;
+        } else if (FamilySpecificServices->GetProcIddMax (FamilySpecificServices, (UINT8) (Pstate + 1), &NextPstateCurrent, StdHeader)) {
+          NextPstateCurrent = CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].InrushCurrentLimit + NextPstateCurrent;
+        }
+        if ((PstateCurrent <= CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].LowPowerThreshold) && (NextPstateCurrent <= CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].LowPowerThreshold) && (PstateVID != PreviousVID)) {
+          EnablePsi = TRUE;
+          break;
+        }
+        PreviousVID = PstateVID;
+      }
+    }
+
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = PW_CTL_MISC_REG;
+    OrMask = 0x00000000;
+    AndMask = 0xFFFFFFFF;
+    ((POWER_CTRL_MISC_REGISTER *) &AndMask)->PsiVid = 0;
+    if (EnablePsi) {
+      ((POWER_CTRL_MISC_REGISTER *) &OrMask)->PsiVid = PstateVID;
+      ((POWER_CTRL_MISC_REGISTER *) &OrMask)->PsiVidEn = 1;
+    } else {
+      ((POWER_CTRL_MISC_REGISTER *) &AndMask)->PsiVidEn = 0;
+    }
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader);
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPowerPlane.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPowerPlane.h
new file mode 100644
index 0000000000..8396bf3146
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrPowerPlane.h
@@ -0,0 +1,77 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Models 0x00 - 0x0F Power Plane related functions and structures
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _F15_OR_POWER_PLANE_H_
+#define _F15_OR_POWER_PLANE_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F15OrPmPwrPlaneInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _F15_OR_POWER_PLANE_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrSharedMsrTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrSharedMsrTable.c
new file mode 100644
index 0000000000..311e210134
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrSharedMsrTable.c
@@ -0,0 +1,376 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi Shared MSR table with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 53046 $   @e \$Date: 2011-05-13 20:20:37 -0600 (Fri, 13 May 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORSHAREDMSRTABLE_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+F15OrFpCfgInit (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F15OrSharedMsrRegisters[] =
+{
+//  M S R    T a b l e s
+// ----------------------
+
+// MSR_TOM2 (0xC001001D)
+// bits[63:0] - TOP_MEM2 = 0
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                         // platformFeatures
+    {{
+      MSR_TOM2,                           // MSR Address - Shared
+      0x0000000000000000,                 // OR Mask
+      0xFFFFFFFFFFFFFFFF,                 // NAND Mask
+    }}
+  },
+
+// MSR_SYS_CFG (0xC0010010)
+// bit[21] MtrrTom2En = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                         // platformFeatures
+    {{
+      MSR_SYS_CFG,                        // MSR Address - Shared
+      (1 << 21),                          // OR Mask
+      (1 << 21),                          // NAND Mask
+    }}
+  },
+
+// MSR_MC1_CTL_MASK (0xC0010045)
+// bit[15] BSRP = 1, Erratum #593, OR-ALL
+// bit[18] DEIBP = 1, Erratum #586, OR-ALL
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                         // platformFeatures
+    {{
+      MSR_MC1_CTL_MASK,                   // MSR Address
+      0x0000000000048000,                 // OR Mask
+      0x0000000000048000,                 // NAND Mask
+    }}
+  },
+
+// MSR_CU_CFG (0xC0011023)
+// bit[10] PbForceRespInOrder = 0
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                    // CpuFamily
+      AMD_F15_OR_ALL                    // CpuRevision
+    },
+    {AMD_PF_ALL},                       // platformFeatures
+    {{
+      MSR_CU_CFG,                       // MSR Address - Shared
+      0,                                // OR Mask
+      0x00000400,                       // NAND Mask
+    }}
+  },
+
+// MSR_DE_CFG (0xC0011029)
+// bit[10] ResyncPredSingleDispDis = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                    // CpuFamily
+      AMD_F15_OR_ALL                    // CpuRevision
+    },
+    {AMD_PF_ALL},                       // platformFeatures
+    {{
+      MSR_DE_CFG,                       // MSR Address - Shared
+      0x0000000000000400,               // OR Mask
+      0x0000000000000400,               // NAND Mask
+    }}
+  },
+
+// MSR_CU_CFG2 (0xC001102A)
+// bit[50] = 1
+// bit[11] = 1, Erratum #503, OR-ALL
+// bit[10] = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                    // CpuFamily
+      AMD_F15_OR_ALL                    // CpuRevision
+    },
+    {AMD_PF_ALL},                       // platformFeatures
+    {{
+      MSR_CU_CFG2,                      // MSR Address - Shared
+      0x0004000000000C00,               // OR Mask
+      0x0004000000000C00,               // NAND Mask
+    }}
+  },
+
+// MSR_CU_CFG3 (0xC001102B)
+// bit[42] PwcDisableWalkerSharing = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                    // CpuFamily
+      AMD_F15_OR_ALL                    // CpuRevision
+    },
+    {AMD_PF_ALL},                       // platformFeatures
+    {{
+      MSR_CU_CFG3,                      // MSR Address
+      0x0000040000000000,               // OR Mask
+      0x0000040000000000,               // NAND Mask
+    }}
+  },
+};
+
+
+// Compute Unit Count Dependent MSR Table
+
+STATIC CONST MSR_CU_TYPE_ENTRY_INITIALIZER ROMDATA F15OrSharedMsrCuRegisters[] =
+{
+//  M S R    T a b l e s
+// ----------------------
+
+  // MSR_CU_CFG2 (0xC001102A)
+  // bits[7:6] - ThrottleNbInterface[1:0] = 0
+  // bits[37:36] - ThrottleNbInterface[3:2] = 0
+  {
+    CompUnitCountsMsr,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                         // platformFeatures
+    {{
+	  {(COMPUTE_UNIT_RANGE_0 (1, 1) | COUNT_RANGE_NONE)}, // 1 compute unit
+      {
+        MSR_CU_CFG2,                        // MSR Address - Shared
+        0x0000000000000000,                 // OR Mask
+        0x00000030000000C0,                 // NAND Mask
+      }
+    }}
+  },
+
+  // MSR_CU_CFG2 (0xC001102A)
+  // bits[7:6] - ThrottleNbInterface[1:0] = 1
+  // bits[37:36] - ThrottleNbInterface[3:2] = 0
+  {
+    CompUnitCountsMsr,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                         // platformFeatures
+    {{
+	  {(COMPUTE_UNIT_RANGE_0 (2, 2) | COUNT_RANGE_NONE)}, // 2 compute units
+      {
+        MSR_CU_CFG2,                        // MSR Address - Shared
+        0x0000000000000040,                 // OR Mask
+        0x00000030000000C0,                 // NAND Mask
+      }
+    }}
+  },
+
+  // MSR_CU_CFG2 (0xC001102A)
+  // bits[7:6] - ThrottleNbInterface[1:0] = 2
+  // bits[37:36] - ThrottleNbInterface[3:2] = 0
+  {
+    CompUnitCountsMsr,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                         // platformFeatures
+    {{
+	  {(COMPUTE_UNIT_RANGE_0 (3, 3) | COUNT_RANGE_NONE)}, // 3 compute units
+      {
+        MSR_CU_CFG2,                        // MSR Address - Shared
+        0x0000000000000080,                 // OR Mask
+        0x00000030000000C0,                 // NAND Mask
+      }
+    }}
+  },
+
+  // MSR_CU_CFG2 (0xC001102A)
+  // bits[7:6] - ThrottleNbInterface[1:0] = 3
+  // bits[37:36] - ThrottleNbInterface[3:2] = 0
+  {
+    CompUnitCountsMsr,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                      // CpuRevision
+    },
+    {AMD_PF_ALL},                         // platformFeatures
+    {{
+	  {(COMPUTE_UNIT_RANGE_0 (4, 4) | COUNT_RANGE_NONE)}, // 4 compute units
+      {
+        MSR_CU_CFG2,                        // MSR Address - Shared
+        0x00000000000000C0,                 // OR Mask
+        0x00000030000000C0,                 // NAND Mask
+      }
+    }}
+  },
+};
+
+// Shared MSRs with Special Programming Requirements Table
+
+STATIC CONST FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER ROMDATA F15OrSharedMsrWorkarounds[] =
+{
+  // MSR_FP_CFG (0xC0011028)
+  // bit[16] -     DiDtMode = F3x1FC[0]
+  // bits[22:18] - DiDtCfg0 = F3x1FC[5:1]
+  // bits[34:27] - DiDtCfg1 = F3x1FC[13:6]
+  {
+    FamSpecificWorkaround,
+    {
+      AMD_FAMILY_15_OR,
+      AMD_F15_OR_ALL
+    },
+    {AMD_PF_ALL},
+    {{
+      F15OrFpCfgInit,
+      0x00000000
+    }}
+  },
+};
+
+
+
+CONST REGISTER_TABLE ROMDATA F15OrSharedMsrRegisterTable = {
+  CorePairPrimary,
+  (sizeof (F15OrSharedMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F15OrSharedMsrRegisters,
+};
+
+
+CONST REGISTER_TABLE ROMDATA F15OrSharedMsrCuRegisterTable = {
+  CorePairPrimary,
+  (sizeof (F15OrSharedMsrCuRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F15OrSharedMsrCuRegisters,
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrSharedMsrWorkaroundTable = {
+  CorePairPrimary,
+  (sizeof (F15OrSharedMsrWorkarounds) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *) &F15OrSharedMsrWorkarounds,
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Update the FP_CFG MSR in current processor for Family15h OR.
+ *
+ * This function satisfies the programming requirements for the FP_CFG MSR.
+ *
+ * @param[in]   Data         The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in]   StdHeader    Config handle for library and services.
+ *
+ */
+VOID
+F15OrFpCfgInit (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT32       ProductInfo;
+  UINT64       FpCfg;
+  PCI_ADDR     PciAddress;
+
+  if (IsWarmReset (StdHeader)) {
+    OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = PRCT_INFO_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &ProductInfo, StdHeader);
+
+    LibAmdMsrRead (MSR_FP_CFG, &FpCfg, StdHeader);
+    ((FP_CFG_MSR *) &FpCfg)->DiDtMode = ((PRODUCT_INFO_REGISTER *) &ProductInfo)->DiDtMode;
+    ((FP_CFG_MSR *) &FpCfg)->DiDtCfg0 = ((PRODUCT_INFO_REGISTER *) &ProductInfo)->DiDtCfg0;
+    ((FP_CFG_MSR *) &FpCfg)->DiDtCfg1 = ((PRODUCT_INFO_REGISTER *) &ProductInfo)->DiDtCfg1;
+    ((FP_CFG_MSR *) &FpCfg)->AlwaysOnThrottle = ((PRODUCT_INFO_REGISTER *) &ProductInfo)->AlwaysOnThrottle;
+    ((FP_CFG_MSR *) &FpCfg)->Pipe3ThrottleDis = ((PRODUCT_INFO_REGISTER *) &ProductInfo)->Pipe3ThrottleDis;
+    LibAmdMsrWrite (MSR_FP_CFG, &FpCfg, StdHeader);
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrSingleLinkPciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrSingleLinkPciTables.c
new file mode 100644
index 0000000000..5df3ffa252
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrSingleLinkPciTables.c
@@ -0,0 +1,321 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi PCI tables in Recommended Settings for Single Link Processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 41897 $   @e \$Date: 2010-11-12 12:39:18 +0800 (Fri, 12 Nov 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORSINGLELINKPCITABLES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F15OrSingleLinkPciRegisters[] =
+{
+// F0x68 - Link Transaction Control
+// bit[14:13], BufPriRel = 01b
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                     // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68),  // Address
+      0x00002000,                           // regData
+      0x00006000,                           // regMask
+    }}
+  },
+// F0x68 - Link Transaction Control
+// bit[24], DispRefModeEn = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_ALL},                             // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68),  // Address
+      0x00000000,                           // regData
+      0x01000000,                           // regMask
+    }}
+  },
+// F0x68 - Link Transaction Control
+// bit[24], DispRefModeEn = 1 for UMA, but can only set it on the warm reset.
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_UMA},                     // platform Features
+    {{
+      PERFORMANCE_IS_WARM_RESET,
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68),  // Address
+      0x01000000,                           // regData
+      0x01000000,                           // regMask
+    }}
+  },
+  // F0x[F0,D0,B0,90] Link Base Buffer Count Register
+  // 27:25 FreeData: 0
+  // 24:20 FreeCmd: 8
+  // 19:18 RspData: 1
+  // 17:16 NpReqData: 0
+  // 15:12 ProbeCmd: 0
+  // 11:8 RspCmd: 2
+  // 7:5 PReq: 7
+  // 4:0 NpReqCmd: 14
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},
+    {{
+      (HT_HOST_AND | HT_HOST_FEAT_NONCOHERENT | HT_HOST_FEAT_GANGED), // Link Features
+      0x10,                                 // Address
+      0x008402EE,                           // Data
+      0x0FFFFFFF                            // Mask
+    }},
+  },
+  // F0x[F4,D4,B4,94] Link Base Buffer Count Register
+  // 28:27 IsocRspData: 0
+  // 26:25 IsocNpReqData: 0
+  // 24:22 IsocRspCmd: 0
+  // 21:19 IsocPReq: 0
+  // 18:16 IsocNpReqCmd: 1
+  {
+    HtHostPciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},
+    {{
+      (HT_HOST_AND | HT_HOST_FEAT_NONCOHERENT | HT_HOST_FEAT_GANGED), // Link Features
+      0x14,                                 // Address
+      0x00010000,                           // Data
+      0x1FFF0000                            // Mask
+    }},
+  },
+// F0x170 - Link Extended Control Register - Link 0, sublink 0
+// bit[8] LS2En = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_OR_ALL                           // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                     // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_0, 0x170), // Address
+      0x00000100,                           // regData
+      0x00000100,                           // regMask
+    }}
+  },
+// F2x118 - Memory Controller Configuration Low Register
+// bits[13:12] MctPriIsoc = 10b
+// bits[31:28] MctVarPriCntLmt = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    { (AMD_PF_UMA | AMD_PF_UMA_IFCM) },        // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x118),  // Address
+      0x00002000,                           // regData
+      0xF0003000,                           // regMask
+    }}
+  },
+// F2x118 - Memory Controller Configuration Low Register
+// bits[13:12] MctPriIsoc = 11b
+// bits[31:28] MctVarPriCntLmt = 1
+  {
+    ProfileFixup,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    { (AMD_PF_UMA | AMD_PF_UMA_IFCM) },       // platform Features
+    {{
+      PERFORMANCE_MCT_ISOC_VARIABLE,        // Features
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x118),  // Address
+      0x10003000,                           // regData
+      0xF0003000,                           // regMask
+    }}
+  },
+// F3x140 - SRI_to_XCS Token Count
+// bits[9:8] UpRspTok = 3
+// bits[23:20] FreeTok = 10
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},                   // platform Features
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+      0x00A00300,                           // regData
+      0x00F00300,                           // regMask
+    }}
+  },
+// F3x148 - Link to XCS Token Count
+// bits[1:0] ReqTok0 = 2
+// bits[3:2] PReqTok0 = 2
+// bits[5:4] RspTok0 = 2
+// bits[7:6] ProbeTok0 = 0
+// bits[9:8] IsocReqTok0 = 1
+// bits[11:10] IsocPreqTok0 = 0
+// bits[13:12] IsocRspTok0 = 0
+// bits[15:14] FreeTok[1:0] = 3
+// bits[17:16] ReqTok1 = 0
+// bits[19:18] PReqTok1 = 0
+// bits[21:20] RspTok1 = 0
+// bits[23:22] ProbeTok1= 0
+// bits[24] IsocReqTok1 = 0
+// bits[26] IsocPreqTok1 = 0
+// bits[28] IsocRspTok1 = 0
+// bits[31:30] FreeTok[3:2] = 0
+  {
+    HtTokenPciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    {AMD_PF_SINGLE_LINK},  // platformFeatures
+    {{
+      (COUNT_RANGE_ALL | COUNT_RANGE_NONE),    //SCM
+      PERFORMANCE_PROFILE_ALL,
+      (HT_HOST_AND | HT_HOST_FEAT_NONCOHERENT  | HT_HOST_FEAT_GANGED),
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+      0x0000C12A,                           // regData
+      0xD5FFFFFF,                           // regMask
+    }}
+  },
+  // F3x158 - Link to XCS Token Count Registers
+  // bits [3:0]LnkToXcsDRToken = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+   {AMD_PF_SINGLE_LINK},
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x158), // Address
+      0x00000000,
+      0x0000000F
+    }}
+  },
+  // F3x158 - Link to XCS Token Count Registers
+  // bits [3:0]LnkToXcsDRToken = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA) },
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x158), // Address
+      0x00000003,
+      0x0000000F
+    }}
+  },
+  // F3x158 - Link to XCS Token Count Registers
+  // bits [3:0]LnkToXcsDRToken = 3
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_OR_ALL                         // CpuRevision
+    },
+    { (AMD_PF_AND | AMD_PF_SINGLE_LINK | AMD_PF_UMA_IFCM) },
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x158), // Address
+      0x00000003,
+      0x0000000F
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrSingleLinkPciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F15OrSingleLinkPciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F15OrSingleLinkPciRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrUtilities.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrUtilities.c
new file mode 100644
index 0000000000..ed2e460516
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrUtilities.c
@@ -0,0 +1,939 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 models 0 - 0Fh specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 15h OR.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 58928 $   @e \$Date: 2011-09-08 16:43:14 -0600 (Thu, 08 Sep 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "cpuEarlyInit.h"
+#include "GeneralServices.h"
+#include "OptionMultiSocket.h"
+#include "F15OrUtilities.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORUTILITIES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Node ID MSR register fields.
+ * Provide the layout of fields in the Node ID MSR.
+ */
+typedef struct {
+  UINT64    NodeId:3;                 ///< The core is on the node with this node id.
+  UINT64    NodesPerProcessor:3;      ///< The number of Nodes in this processor.
+  UINT64    BiosScratch:6;            ///< BiosScratch, use as the AP core heap index.
+  UINT64    :(63 - 11);               ///< Reserved.
+} NODE_ID_MSR_FIELDS;
+
+/// Node ID MSR.
+typedef union {
+  NODE_ID_MSR_FIELDS   Fields;        ///< Access the register as individual fields
+  UINT64               Value;         ///< Access the register value.
+} NODE_ID_MSR;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+F15OrNbPstateDisCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+F15OrSetDownCoreRegister (
+  IN       CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices,
+  IN       UINT32 *Socket,
+  IN       UINT32 *Module,
+  IN       UINT32 *LeveledCores,
+  IN       CORE_LEVELING_TYPE CoreLevelMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Get CPU pstate current.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_IDD_MAX}.
+ *
+ *    This function returns the ProcIddMax.
+ *
+ *  @param[in]     FamilySpecificServices    The current Family Specific Services.
+ *  @param[in]     Pstate                    The P-state to check.
+ *  @param[out]    ProcIddMax                P-state current in mA.
+ *  @param[in]     StdHeader                 Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                      P-state is enabled
+ *  @retval        FALSE                     P-state is disabled
+ */
+BOOLEAN
+F15OrGetProcIddMax (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT8                  Pstate,
+     OUT   UINT32                 *ProcIddMax,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       IddDiv;
+  UINT32       NumberOfPhysicalCores;
+  UINT32       MsrAddress;
+  UINT64       PstateMsr;
+  BOOLEAN      IsPstateEnabled;
+  CPUID_DATA   CpuId;
+
+  IsPstateEnabled = FALSE;
+
+  MsrAddress = (UINT32) (Pstate + PS_REG_BASE);
+  ASSERT (MsrAddress <= PS_MAX_REG);
+
+  LibAmdMsrRead (MsrAddress, &PstateMsr, StdHeader);
+  if (((PSTATE_MSR *) &PstateMsr)->PsEnable == 1) {
+    switch (((PSTATE_MSR *) &PstateMsr)->IddDiv) {
+    case 0:
+      IddDiv = 1000;
+      break;
+    case 1:
+      IddDiv = 100;
+      break;
+    case 2:
+      IddDiv = 10;
+      break;
+    default:  // IddDiv = 3 is reserved. Use 10
+      IddDiv = 10;
+      break;
+    }
+    LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuId, StdHeader);
+    NumberOfPhysicalCores = ((CpuId.ECX_Reg & 0xFF) + 1);
+
+    *ProcIddMax = (UINT32) ((PSTATE_MSR *) &PstateMsr)->IddValue * IddDiv * NumberOfPhysicalCores;
+    IsPstateEnabled = TRUE;
+  }
+  return IsPstateEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set down core register on Orochi
+ *
+ * This function set F3x190 Downcore Control Register[5:0]
+ *
+ * @param[in]   FamilySpecificServices   The current Family Specific Services.
+ * @param[in]   Socket                   Socket ID.
+ * @param[in]   Module                   Module ID in socket.
+ * @param[in]   LeveledCores             Number of core.
+ * @param[in]   CoreLevelMode            Core level mode.
+ * @param[in]   StdHeader                Header for library and services.
+ *
+ * @retval      TRUE                     Down Core register is updated.
+ * @retval      FALSE                    Down Core register is not updated.
+ */
+BOOLEAN
+F15OrSetDownCoreRegister (
+  IN       CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices,
+  IN       UINT32 *Socket,
+  IN       UINT32 *Module,
+  IN       UINT32 *LeveledCores,
+  IN       CORE_LEVELING_TYPE CoreLevelMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8     Xbar2SriFreeListCBC;
+  UINT8     L3FreeListCBC;
+  UINT32    TempVar32_a;
+  UINT32    CoreDisableBits;
+  UINT32    NumberOfEnabledCores;
+  UINT32    NumberOfEnabledCU;
+  PCI_ADDR  PciAddress;
+  BOOLEAN   IsUpdated;
+  AGESA_STATUS                    AgesaStatus;
+  NB_CAPS_REGISTER                NbCaps;
+  FREE_LIST_BUFFER_COUNT_REGISTER FreeListBufferCount;
+  L3_BUFFER_COUNT_REGISTER        L3BufferCnt;
+
+  IsUpdated = FALSE;
+
+  if (CoreLevelMode == CORE_LEVEL_COMPUTE_UNIT) {
+    switch (*LeveledCores) {
+    case 1:
+      CoreDisableBits = DOWNCORE_MASK_SINGLE;
+      break;
+    case 2:
+      CoreDisableBits = DOWNCORE_MASK_DUAL_COMPUTE_UNIT;
+      break;
+    case 3:
+      CoreDisableBits = DOWNCORE_MASK_TRI_COMPUTE_UNIT;
+      break;
+    case 4:
+      CoreDisableBits = DOWNCORE_MASK_FOUR_COMPUTE_UNIT;
+      break;
+    default:
+      CoreDisableBits = 0;
+      break;
+    }
+
+  } else {
+    switch (*LeveledCores) {
+    case 1:
+      CoreDisableBits = DOWNCORE_MASK_SINGLE;
+      break;
+    case 2:
+      CoreDisableBits = DOWNCORE_MASK_DUAL;
+      break;
+    case 4:
+      CoreDisableBits = DOWNCORE_MASK_FOUR;
+      break;
+    case 6:
+      CoreDisableBits = DOWNCORE_MASK_SIX;
+      break;
+    default:
+      CoreDisableBits = 0;
+      break;
+    }
+  }
+
+  if (CoreDisableBits != 0) {
+    if (GetPciAddress (StdHeader, (UINT8) *Socket, (UINT8) *Module, &PciAddress, &AgesaStatus)) {
+      PciAddress.Address.Function = FUNC_5;
+      PciAddress.Address.Register = NORTH_BRIDGE_CAPABILITIES_2_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+      TempVar32_a = (TempVar32_a & 0xFF) + 1;
+      TempVar32_a = (1 << TempVar32_a) - 1;
+      CoreDisableBits &= TempVar32_a;
+      NumberOfEnabledCores = ~(CoreDisableBits | ~(TempVar32_a));
+
+      PciAddress.Address.Function = FUNC_3;
+      PciAddress.Address.Register = DOWNCORE_CTRL;
+      LibAmdPciRead (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+      if ((TempVar32_a | CoreDisableBits) != TempVar32_a) {
+        TempVar32_a |= CoreDisableBits;
+        LibAmdPciWrite (AccessWidth32, PciAddress, &TempVar32_a, StdHeader);
+        IsUpdated = TRUE;
+
+        for (NumberOfEnabledCU = 0; NumberOfEnabledCores != 0; NumberOfEnabledCores >>= 2) {
+          NumberOfEnabledCU += ((NumberOfEnabledCores & 3) != 0) ? 1 : 0;
+        }
+        switch (NumberOfEnabledCU) {
+        case 1:
+          Xbar2SriFreeListCBC = 0x16;
+          L3FreeListCBC = 0x1C;
+          break;
+        case 2:
+          Xbar2SriFreeListCBC = 0x14;
+          L3FreeListCBC = 0x18;
+          break;
+        case 3:
+          Xbar2SriFreeListCBC = 0x12;
+          L3FreeListCBC = 0x14;
+          break;
+        case 4:
+          Xbar2SriFreeListCBC = 0x10;
+          L3FreeListCBC = 0x10;
+          break;
+        default:
+          Xbar2SriFreeListCBC = 0x16;
+          L3FreeListCBC = 0xE;
+          break;
+        }
+        //D18F3x1A0[8:4] L3FreeListCBC:
+        //BIOS: IF (NumOfCompUnitsOnNode==1) THEN 1Ch ELSEIF (NumOfCompUnitsOnNode==2)
+        //THEN 18h ELSEIF (NumOfCompUnitsOnNode==3) THEN 14h ELSEIF
+        //(NumOfCompUnitsOnNode==4) THEN 10h ELSEIF (NumOfCompUnitsOnNode==5) THEN 11h
+        //ELSE 0Eh ENDIF.
+        PciAddress.Address.Function = FUNC_3;
+        PciAddress.Address.Register = L3_BUFFER_COUNT_REG;
+        LibAmdPciRead (AccessWidth32, PciAddress, &L3BufferCnt, StdHeader);
+        L3BufferCnt.L3FreeListCBC = L3FreeListCBC;
+        LibAmdPciWrite (AccessWidth32, PciAddress, &L3BufferCnt, StdHeader);
+
+        //D18F3x7C[4:0]Xbar2SriFreeListCBC:
+        //BIOS: IF (L3Enabled) THEN 16h ELSEIF (D18F5x80[Enabled[3]]==1) THEN 10h ELSEIF
+        //(D18F5x80[Enabled[2]]==1) THEN 12h ELSEIF (D18F5x80[Enabled[1]]==1) THEN 14h ELSE 16h ENDIF.
+        PciAddress.Address.Function = FUNC_3;
+        PciAddress.Address.Register = NB_CAPS_REG;
+        LibAmdPciRead (AccessWidth32, PciAddress, &NbCaps, StdHeader);
+        if (NbCaps.L3Capable == 0) {
+          PciAddress.Address.Function = FUNC_3;
+          PciAddress.Address.Register = FREE_LIST_BUFFER_COUNT_REG;
+          LibAmdPciRead (AccessWidth32, PciAddress, &FreeListBufferCount, StdHeader);
+          FreeListBufferCount.Xbar2SriFreeListCBC = Xbar2SriFreeListCBC;
+          LibAmdPciWrite (AccessWidth32, PciAddress, &FreeListBufferCount, StdHeader);
+        }
+      }
+    }
+  }
+
+  return IsUpdated;
+}
+
+
+CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F15OrCoreLeveling =
+{
+  0,
+  F15OrSetDownCoreRegister
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Determines the NB clock on the desired node.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_NB_FREQ}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  FrequencyInMHz           Northbridge clock frequency in MHz.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ *  @return      AGESA_SUCCESS            FrequencyInMHz is valid.
+ */
+AGESA_STATUS
+F15OrGetCurrentNbFrequency (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32  NbFid;
+  UINT32  NbDid;
+  UINT32  LocalPciRegister;
+  PCI_ADDR     PciAddress;
+
+  if (OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader)) {
+    PciAddress.Address.Function = FUNC_5;
+    PciAddress.Address.Register = NB_PSTATE_STATUS;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    NbFid = ((NB_PSTATE_STS_REGISTER *) &LocalPciRegister)->CurNbFid;
+    NbDid = ((NB_PSTATE_STS_REGISTER *) &LocalPciRegister)->CurNbDid;
+    *FrequencyInMHz = (((NbFid + 4) * 200) / (1 << NbDid));
+  }
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the node's minimum and maximum northbridge frequency.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_MIN_MAX_NB_FREQ}.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     PlatformConfig          Platform profile/build option config structure.
+ *  @param[in]     PciAddress              The segment, bus, and device numbers of the CPU in question.
+ *  @param[out]    MinFreqInMHz            The node's minimum northbridge frequency.
+ *  @param[out]    MaxFreqInMHz            The node's maximum northbridge frequency.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        AGESA_SUCCESS           Northbridge frequency is valid
+ */
+AGESA_STATUS
+F15OrGetMinMaxNbFrequency (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+     OUT   UINT32                 *MinFreqInMHz,
+     OUT   UINT32                 *MaxFreqInMHz,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  INT8         NbPsMaxVal;
+  UINT32       LocalPciRegister;
+  UINT32       FreqNumerator;
+  UINT32       FreqDivisor;
+  BOOLEAN      CustomNbPs;
+  AGESA_STATUS AgesaStatus;
+
+  CustomNbPs      = FALSE;
+  AgesaStatus     = AGESA_ERROR;
+
+  // Obtain the max NB frequency on the node
+  PciAddress->Address.Function = FUNC_5;
+  PciAddress->Address.Register = NB_PSTATE_0;
+  LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+  if (((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbPstateEn == 1) {
+    FreqNumerator = ((((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbFid + 4) * 200);
+    FreqDivisor   = (1 << ((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbDid);
+
+    *MaxFreqInMHz = (FreqNumerator / FreqDivisor);
+    AgesaStatus = AGESA_SUCCESS;
+  }
+
+  // If platform configuration disable NB P-states, return the NB P0 frequency
+  // as both the min and max frequency on the node.
+  if (PlatformConfig->PlatformProfile.PlatformPowerPolicy == Performance) {
+    *MinFreqInMHz = *MaxFreqInMHz;
+  } else {
+    PciAddress->Address.Function = FUNC_5;
+    PciAddress->Address.Register = NB_PSTATE_CTRL;
+    LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+    NbPsMaxVal = (INT8) ((NB_PSTATE_CTRL_REGISTER *) &LocalPciRegister)->NbPstateMaxVal;
+
+    // Obtain the min NB frequency on the node, starting from NB Pmin
+    for (; NbPsMaxVal >= 0; NbPsMaxVal--) {
+      PciAddress->Address.Function = FUNC_5;
+      PciAddress->Address.Register = (NB_PSTATE_0 + (4 * NbPsMaxVal));
+      LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+
+      // Ensure that the NB Pstate is enabled
+      if (((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbPstateEn == 1) {
+        FreqNumerator = ((((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbFid + 4) * 200);
+        FreqDivisor   = (1 << ((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbDid);
+
+        *MinFreqInMHz = (FreqNumerator / FreqDivisor);
+        AgesaStatus = AGESA_SUCCESS;
+        break;
+      }
+    }
+  }
+  IDS_OPTION_HOOK (IDS_NBPS_MIN_FREQ, MinFreqInMHz, StdHeader);
+  return AgesaStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Determines the NB clock on the desired node.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_NB_PSTATE_INFO}.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     PlatformConfig          Platform profile/build option config structure.
+ *  @param[in]     PciAddress              The segment, bus, and device numbers of the CPU in question.
+ *  @param[in]     NbPstate                The NB P-state number to check.
+ *  @param[out]    FreqNumeratorInMHz      The desired node's frequency numerator in megahertz.
+ *  @param[out]    FreqDivisor             The desired node's frequency divisor.
+ *  @param[out]    VoltageInuV             The desired node's voltage in microvolts.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                    NbPstate is valid
+ *  @retval        FALSE                   NbPstate is disabled or invalid
+ */
+BOOLEAN
+F15OrGetNbPstateInfo (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+  IN       UINT32                 NbPstate,
+     OUT   UINT32                 *FreqNumeratorInMHz,
+     OUT   UINT32                 *FreqDivisor,
+     OUT   UINT32                 *VoltageInuV,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32   LocalPciRegister;
+  BOOLEAN  PstateIsValid;
+
+  PstateIsValid = FALSE;
+
+  // If NB P1, P2, or P3 is requested, make sure that NB Pstate is enabled
+  if ((NbPstate == 0) || (FamilySpecificServices->IsNbPstateEnabled (FamilySpecificServices, PlatformConfig, StdHeader))) {
+    PciAddress->Address.Function = FUNC_5;
+    PciAddress->Address.Register = NB_PSTATE_CTRL;
+    LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+
+    if (NbPstate <= ((NB_PSTATE_CTRL_REGISTER *) &LocalPciRegister)->NbPstateMaxVal) {
+      PciAddress->Address.Register = (NB_PSTATE_0 + (4 * NbPstate));
+      LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+
+      // Ensure that requested NbPstate is enabled
+      if (((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbPstateEn == 1) {
+        *FreqNumeratorInMHz = ((((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbFid + 4) * 200);
+        *FreqDivisor = (1 << ((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbDid);
+        *VoltageInuV = (1550000 - (12500 * (((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbVid)));
+        PstateIsValid = TRUE;
+      }
+    }
+  }
+  return PstateIsValid;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the number of physical cores of current processor.
+ *
+ * @CpuServiceMethod{::F_CPU_NUMBER_OF_PHYSICAL_CORES}.
+ *
+ * @param[in]      FamilySpecificServices         The current Family Specific Services.
+ * @param[in]      StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ * @return         The number of physical cores.
+ */
+UINT8
+F15OrGetNumberOfPhysicalCores (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       CmpCap;
+  UINT32       CmpCapOnNode;
+  UINT32       Socket;
+  UINT32       Module;
+  UINT32       Core;
+  UINT32       LocalPciRegister;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS IgnoredSts;
+
+  CmpCap = 0;
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts)) {
+      PciAddress.Address.Function = FUNC_5;
+      PciAddress.Address.Register = NORTH_BRIDGE_CAPABILITIES_2_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      CmpCapOnNode = (UINT8) (LocalPciRegister & 0xFF);
+      CmpCapOnNode++;
+      CmpCap += CmpCapOnNode;
+    }
+  }
+  return ((UINT8) CmpCap);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Use the Mailbox Register to get the Ap Mailbox info for the current core.
+ *
+ *  @CpuServiceMethod{::F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE}.
+ *
+ *  Access the mailbox register used with this NB family.  This is valid until the
+ *  point that some init code initializes the mailbox register for its normal use.
+ *  The Machine Check Misc (Thresholding) register is available as both a PCI config
+ *  register and a MSR, so it can be used as a mailbox from HT to other functions.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[out]    ApMailboxInfo           The AP Mailbox info
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+F15OrGetApMailboxFromHardware (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+     OUT   AP_MAILBOXES           *ApMailboxInfo,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT64 MailboxInfo;
+
+  LibAmdMsrRead (MSR_MC_MISC_LINK_THRESHOLD, &MailboxInfo, StdHeader);
+  // Mailbox info is in bits 32 thru 43, 12 bits.
+  ApMailboxInfo->ApMailInfo.Info = (((UINT32) (MailboxInfo >> 32)) & (UINT32)0x00000FFF);
+  LibAmdMsrRead (MSR_MC_MISC_L3_THRESHOLD, &MailboxInfo, StdHeader);
+  // Mailbox info is in bits 32 thru 43, 12 bits.
+  ApMailboxInfo->ApMailExtInfo.Info = (((UINT32) (MailboxInfo >> 32)) & (UINT32)0x00000FFF);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Set the system AP core number in the AP's Mailbox.
+ *
+ *  @CpuServiceMethod{::F_CPU_SET_AP_CORE_NUMBER}.
+ *
+ *  Access the mailbox register used with this NB family.  This is only intended to
+ *  run on the BSC at the time of initial AP launch.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     Socket                 The AP's socket
+ *  @param[in]     Module                 The AP's module
+ *  @param[in]     ApCoreNumber           The AP's unique core number
+ *  @param[in]     StdHeader              Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+F15OrSetApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT32                 Socket,
+  IN       UINT32                 Module,
+  IN       UINT32                 ApCoreNumber,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32   LocalPciRegister;
+  PCI_ADDR PciAddress;
+  AGESA_STATUS IgnoredStatus;
+
+  GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus);
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = 0x170;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  ((AP_MAIL_EXT_INFO *) &LocalPciRegister)->Fields.HeapIndex = ApCoreNumber;
+  LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Get this AP's system core number from hardware.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_AP_CORE_NUMBER}.
+ *
+ *  Returns the system core number from the scratch MSR, where
+ *  it was saved at heap initialization.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @return        The AP's unique core number
+ */
+UINT32
+F15OrGetApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  NODE_ID_MSR NodeIdMsr;
+
+  LibAmdMsrRead (0xC001100C, &NodeIdMsr.Value, StdHeader);
+  return (UINT32) NodeIdMsr.Fields.BiosScratch;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Move the AP's core number from the mailbox to hardware.
+ *
+ *  @CpuServiceMethod{::F_CPU_TRANSFER_AP_CORE_NUMBER}.
+ *
+ *  Transfers this AP's system core number from the mailbox to
+ *  the NodeId MSR and initializes the other NodeId fields.
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+F15OrTransferApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  AP_MAILBOXES Mailboxes;
+  NODE_ID_MSR NodeIdMsr;
+  UINT64 ExtFeatures;
+
+  NodeIdMsr.Value = 0;
+  FamilySpecificServices->GetApMailboxFromHardware (FamilySpecificServices, &Mailboxes, StdHeader);
+  NodeIdMsr.Fields.BiosScratch = Mailboxes.ApMailExtInfo.Fields.HeapIndex;
+  NodeIdMsr.Fields.NodeId = Mailboxes.ApMailInfo.Fields.Node;
+  NodeIdMsr.Fields.NodesPerProcessor = Mailboxes.ApMailInfo.Fields.ModuleType;
+  LibAmdMsrWrite (0xC001100C, &NodeIdMsr.Value, StdHeader);
+
+  // Indicate that the NodeId MSR is supported.
+  LibAmdMsrRead (MSR_CPUID_EXT_FEATS, &ExtFeatures, StdHeader);
+  ExtFeatures = (ExtFeatures | BIT51);
+  LibAmdMsrWrite (MSR_CPUID_EXT_FEATS, &ExtFeatures, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Disable NB P-state.
+ *   - clear F5x1[6C:64]
+ *   - clear F5x170[NbPstateMaxVal]
+ *   - set   F5x170[SwNbPstateLoDis]
+ *   - clear MSRC001_00[6B:64][NbPstate]
+ *
+ * @param[in]     FamilySpecificServices  The current Family Specific Services
+ * @param[in]     CpuEarlyParamsPtr       Service Parameters
+ * @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ */
+VOID
+F15OrNbPstateDis (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS   *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       i;
+  UINT32       PciData;
+  UINT32       AndMask;
+  AP_TASK      TaskPtr;
+  PCI_ADDR     PciAddress;
+
+  // Check whether NB P-state is disabled
+  if (!FamilySpecificServices->IsNbPstateEnabled (FamilySpecificServices, &CpuEarlyParamsPtr->PlatformConfig, StdHeader)) {
+
+    IDS_HDT_CONSOLE (CPU_TRACE, "  NB Pstates disabled\n");
+
+    OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+
+    AndMask = 0x00000000;
+    // If NbPstateHi is not NB P0, get the Pstate pointed to by NbPstateHi and copy it's value to NB P0
+    PciAddress.Address.Function = FUNC_5;
+    PciAddress.Address.Register = NB_PSTATE_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+    if (((NB_PSTATE_CTRL_REGISTER *) &PciData)->NbPstateHi != 0) {
+      PciAddress.Address.Register = NB_PSTATE_0 + (((NB_PSTATE_CTRL_REGISTER *) &PciData)->NbPstateHi * 4);
+      LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+      PciAddress.Address.Register = NB_PSTATE_0;
+      OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, PciData, StdHeader);
+    }
+
+    // Clear F5x1[6C:64]
+    for (i = 1; i < NM_NB_PS_REG; i++) {
+      PciAddress.Address.Register = NB_PSTATE_0 + (i * 4);
+      OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, AndMask, StdHeader);
+    }
+
+    // Clear F5x170[NbPstateMaxVal] and set F5x170[SwNbPstateLoDis]
+    PciAddress.Address.Register = NB_PSTATE_CTRL;
+    AndMask = 0xFFFFFFFF;
+    PciData = 0x00000000;
+    ((NB_PSTATE_CTRL_REGISTER *) &AndMask)->NbPstateMaxVal = 0;
+    ((NB_PSTATE_CTRL_REGISTER *) &PciData)->SwNbPstateLoDis = 1;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, PciData, StdHeader);
+
+    // Clear MSRC001_00[6B:64][NbPstate] on cores
+    TaskPtr.FuncAddress.PfApTask = F15OrNbPstateDisCore;
+    TaskPtr.DataTransfer.DataSizeInDwords = 0;
+    TaskPtr.DataTransfer.DataPtr = NULL;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+
+    // Once we are done disabling NB Pstates, clear F5x170[SwNbPstateLoDis]
+    AndMask = 0xFFFFFFFF;
+    PciData = 0x00000000;
+    ((NB_PSTATE_CTRL_REGISTER *) &AndMask)->SwNbPstateLoDis = 0;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, PciData, StdHeader);
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Disable NB P-state on core.
+ *   - clear MSRC001_00[6B:64][NbPstate].
+ *
+ * @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ */
+VOID
+STATIC
+F15OrNbPstateDisCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 i;
+  UINT64 MsrData;
+
+  // Only one core per compute unit needs to clear NbPstate in P-state MSRs
+  if (IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, StdHeader)) {
+    for (i = MSR_PSTATE_0; i <= MSR_PSTATE_7; i++) {
+      LibAmdMsrRead (i, &MsrData, StdHeader);
+      ((PSTATE_MSR *) &MsrData)->NbPstate = 0;
+      LibAmdMsrWrite (i, &MsrData, StdHeader);
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * A Family Specific Workaround method, to override CPU TDP Limit 2 setting.
+ *
+ * \@TableTypeFamSpecificInstances.
+ *
+ * @param[in]     Data       The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in]     StdHeader  Config params for library, services.
+ */
+VOID
+F15OrOverrideNodeTdpLimit (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT32                OrMask;
+  UINT32                LocalPciRegister;
+  BOOLEAN               IsMultiNodeCpu;
+  PCI_ADDR              PciAddress;
+
+  IsMultiNodeCpu = FALSE;
+  // check if it is MCM part
+  if (OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader)) {
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = NB_CAPS_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    IsMultiNodeCpu = (BOOLEAN) (((NB_CAPS_REGISTER *) &LocalPciRegister)->MultiNodeCpu == 1);
+  }
+
+  if (IsMultiNodeCpu) {
+    PciAddress.Address.Function = FUNC_4;
+    PciAddress.Address.Register = 0x10C;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+    // The correct value is the half of the fused value
+    OrMask = LocalPciRegister & 0xFFFFF000;
+    LocalPciRegister = ((LocalPciRegister & 0x00000FFF) >> 1) | OrMask;
+    LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * A Family Specific Workaround method, to override CPU Node TDP Accumulator Throttle Threshold setting.
+ *
+ * \@TableTypeFamSpecificInstances.
+ *
+ * @param[in]     Data       The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in]     StdHeader  Config params for library, services.
+ */
+VOID
+F15OrOverrideNodeTdpAccumulatorThrottleThreshold (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT8                 CmpCap;
+  UINT32                OrMask;
+  UINT32                CUStatus;
+  UINT32                LocalPciRegister;
+  PCI_ADDR              PciAddress;
+
+  if (OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader)) {
+    PciAddress.Address.Function = FUNC_5;
+    PciAddress.Address.Register = 0x84;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    CmpCap = (UINT8) (LocalPciRegister & 0x000000FF);
+    CmpCap++;
+
+    // check if the part is fused with 1 core enabled per compute unit
+    PciAddress.Address.Register = 0x80;
+    LibAmdPciRead (AccessWidth32, PciAddress, &CUStatus, StdHeader);
+    if ((CUStatus & 0x000F0000) != 0) {
+      CmpCap = CmpCap >> 1;
+    }
+
+    PciAddress.Address.Register = 0xBC;
+    LibAmdPciRead (AccessWidth32, PciAddress, &OrMask, StdHeader);
+    OrMask = (UINT32) ((OrMask & 0x000FFFFF) * CmpCap);
+
+    PciAddress.Address.Register = 0xB4;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    // The correct value is F5xBC[CmpUnitTdpAccThrottleThreshold] x ((F5x84[CmpCap] + 1) / 2).
+    LocalPciRegister = (LocalPciRegister & 0xFFF00000) | (OrMask & 0x000FFFFF);
+    LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * A Family Specific Workaround method, to sync internal node 1 SbiAddr setting.
+ *
+ * \@TableTypeFamSpecificInstances.
+ *
+ * @param[in]     Data       The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in]     StdHeader  Config params for library, services.
+ */
+VOID
+F15OrSyncInternalNode1SbiAddr (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT32       Socket;
+  UINT32       Module;
+  UINT32       DataOr;
+  UINT32       DataAnd;
+  UINT32       ModuleType;
+  PCI_ADDR     PciAddress;
+  AGESA_STATUS AgesaStatus;
+  UINT32       SyncToModule;
+  AP_MAIL_INFO ApMailboxInfo;
+  UINT32       LocalPciRegister;
+
+  ApMailboxInfo.Info = 0;
+
+  GetApMailbox (&ApMailboxInfo.Info, StdHeader);
+  ASSERT (ApMailboxInfo.Fields.Socket < MAX_SOCKETS);
+  ASSERT (ApMailboxInfo.Fields.Module < MAX_DIES);
+  Socket = ApMailboxInfo.Fields.Socket;
+  Module = ApMailboxInfo.Fields.Module;
+  ModuleType = ApMailboxInfo.Fields.ModuleType;
+
+  // sync is just needed on multinode cpu
+  if (ModuleType != 0) {
+    // check if it is internal node 0 of every socket
+    if (Module == 0) {
+      if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &AgesaStatus)) {
+        PciAddress.Address.Function = FUNC_3;
+        PciAddress.Address.Register = 0x1E4;
+        // read internal node 0 F3x1E4[6:4]
+        LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+        DataOr = LocalPciRegister & ((UINT32) (7 << 4));
+        DataAnd = ~(UINT32) (7 << 4);
+        for (SyncToModule = 1; SyncToModule < GetPlatformNumberOfModules (); SyncToModule++) {
+          if (GetPciAddress (StdHeader, Socket, SyncToModule, &PciAddress, &AgesaStatus)) {
+            PciAddress.Address.Function = FUNC_3;
+            PciAddress.Address.Register = 0x1E4;
+            // sync the other internal node F3x1E4[6:4]
+            LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+            LocalPciRegister &= DataAnd;
+            LocalPciRegister |= DataOr;
+            LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+          }
+        }
+      }
+    }
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrUtilities.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrUtilities.h
new file mode 100644
index 0000000000..a52491a2b4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrUtilities.h
@@ -0,0 +1,169 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 15h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 57155 $   @e \$Date: 2011-07-28 02:27:47 -0600 (Thu, 28 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _F15_OR_UTILITES_H_
+#define _F15_OR_UTILITES_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+UINT8
+F15OrGetNumberOfPhysicalCores (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+F15OrGetApMailboxFromHardware (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+     OUT   AP_MAILBOXES           *ApMailboxInfo,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+F15OrNbPstateDis (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+BOOLEAN
+F15OrGetProcIddMax (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT8                  Pstate,
+     OUT   UINT32                 *ProcIddMax,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+AGESA_STATUS
+F15OrGetCurrentNbFrequency (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+F15OrGetMinMaxNbFrequency (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+     OUT   UINT32                 *MinFreqInMHz,
+     OUT   UINT32                 *MaxFreqInMHz,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+BOOLEAN
+F15OrGetNbPstateInfo (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR               *PciAddress,
+  IN       UINT32                 NbPstate,
+     OUT   UINT32                 *FreqNumeratorInMHz,
+     OUT   UINT32                 *FreqDivisor,
+     OUT   UINT32                 *VoltageInuV,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+F15OrSetApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT32                 Socket,
+  IN       UINT32                 Module,
+  IN       UINT32                 ApCoreNumber,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+UINT32
+F15OrGetApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+F15OrTransferApCoreNumber (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+F15OrOverrideNodeTdpLimit (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+VOID
+F15OrOverrideNodeTdpAccumulatorThrottleThreshold (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+VOID
+F15OrSyncInternalNode1SbiAddr (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+#endif  // _F15_OR_UTILITES_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrWorkaroundsTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrWorkaroundsTable.c
new file mode 100644
index 0000000000..7ee0a2d32f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/F15OrWorkaroundsTable.c
@@ -0,0 +1,134 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Models 0x00 - 0x0F Specific Workaround table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/FAMILY/0x15/OR
+ * @e \$Revision: 57155 $   @e \$Date: 2011-07-28 02:27:47 -0600 (Thu, 28 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF15Utilities.h"
+#include "F15OrUtilities.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_F15ORWORKAROUNDSTABLE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  F a m i l y  S p e c i f i c  W o r k a r o u n d    T a b l e s
+// -----------------------------------------------------------------
+
+STATIC CONST FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER ROMDATA F15OrWorkarounds[] =
+{
+// F0x6C - Link Initialization Control Register
+// Request for warm reset in AmdInitEarly
+// [5, BiosRstDet] = 1b
+  {
+    FamSpecificWorkaround,
+    {
+      AMD_FAMILY_15,                        // CpuFamily
+      AMD_F15_ALL                           // CpuRevision
+    },
+	{AMD_PF_ALL},                             // platformFeatures
+    {{
+      SetWarmResetAtEarly,                  // function call
+      0x00000000,                           // data
+    }}
+  },
+  // HT PHY DLL Compensation setting for rev B and later
+  {
+    FamSpecificWorkaround,
+    {
+      AMD_FAMILY_15,
+      AMD_F15_OR_GT_Ax
+    },
+    {AMD_PF_ALL},
+    {{
+      F15HtPhyOverrideDllCompensation,
+      0x00000001
+    }}
+  },
+  // Internal Node 1 SbiAddr sync for OR
+  {
+    FamSpecificWorkaround,
+    {
+      AMD_FAMILY_15_OR,
+      AMD_F15_OR_ALL
+    },
+    {AMD_PF_ALL},
+    {{
+      F15OrSyncInternalNode1SbiAddr,
+      0x00000000
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F15OrWorkaroundsTable = {
+  PrimaryCores,
+  (sizeof (F15OrWorkarounds) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *)F15OrWorkarounds,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrCacheFlushOnHalt.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrCacheFlushOnHalt.c
new file mode 100644
index 0000000000..1692eb9d44
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrCacheFlushOnHalt.c
@@ -0,0 +1,184 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Cache Flush On Halt Function for Family 15h Orochi.
+ *
+ * Contains code to initialize Cache Flush On Halt feature for Family 15h Orochi.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPostInit.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "cpuFeatures.h"
+#include "F15PackageType.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_CPUF15ORCACHEFLUSHONHALT_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+SetF15OrCacheFlushOnHaltRegister (
+  IN       CPU_CFOH_FAMILY_SERVICES     *FamilySpecificServices,
+  IN       UINT64                       EntryPoint,
+  IN       PLATFORM_CONFIGURATION       *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS            *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          P U B L I C     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *    Enable Cpu Cache Flush On Halt Function
+ *
+ *    @param[in]       FamilySpecificServices   The current Family Specific Services.
+ *    @param[in]       EntryPoint               Timepoint designator.
+ *    @param[in]       PlatformConfig           Contains the runtime modifiable feature input data.
+ *    @param[in]       StdHeader                Config Handle for library, services.
+ */
+VOID
+SetF15OrCacheFlushOnHaltRegister (
+  IN       CPU_CFOH_FAMILY_SERVICES     *FamilySpecificServices,
+  IN       UINT64                       EntryPoint,
+  IN       PLATFORM_CONFIGURATION       *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS            *StdHeader
+  )
+{
+  UINT32       AndMask;
+  UINT32       OrMask;
+  PCI_ADDR     PciAddress;
+
+  if ((EntryPoint & (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC)) != 0) {
+    // Set D18F3xDC[CacheFlushOnHaltCtl] != 0
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = CPTC2_REG;
+    OrMask = 0;
+    AndMask = 0xFC00FFFF;
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &OrMask)->CacheFlushOnHaltCtl = 7;
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &OrMask)->CacheFlushOnHaltTmr = 0x28;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F3xDC
+
+    PciAddress.Address.Function = FUNC_4;
+    PciAddress.Address.Register = CSTATE_CTRL1_REG;
+    OrMask = 0;
+    AndMask = 0xFF11FF11;
+    // D18F4x118[CpuPrbEnCstAct0] = 1
+    // D18F4x118[CpuPrbEnCstAct1] = 1
+    // D18F4x118[CacheFlushEnCstAct0] = 1
+    ((CSTATE_CTRL1_REGISTER *) &OrMask)->CpuPrbEnCstAct0 = 1;
+    ((CSTATE_CTRL1_REGISTER *) &OrMask)->CpuPrbEnCstAct1 = 1;
+    ((CSTATE_CTRL1_REGISTER *) &OrMask)->CacheFlushEnCstAct0 = 1;
+
+    // Set C-state Action Field 0
+    ((CSTATE_CTRL1_REGISTER *) &OrMask)->CacheFlushTmrSelCstAct0 = 2;
+    // Set C-state Action Field 1
+    ((CSTATE_CTRL1_REGISTER *) &OrMask)->CacheFlushEnCstAct1 = 1;
+    ((CSTATE_CTRL1_REGISTER *) &OrMask)->CacheFlushTmrSelCstAct1 = 1;
+
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F4x118
+
+    // D18F4x128[CacheFlushSucMonThreshold] = 0
+    PciAddress.Address.Function = FUNC_4;
+    PciAddress.Address.Register = CSTATE_POLICY_CTRL1_REG;
+    OrMask = 0;
+    AndMask = 0xFFFFFFFF;
+    ((CSTATE_POLICY_CTRL1_REGISTER *) &AndMask)->CacheFlushSucMonThreshold = 0;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F4x128
+
+    // D18F3x84[ClkDivisorSmafAct7] = 0
+    // D18F3x84[CpuPrbEnSmafAct7]   = 1
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = ACPI_PWR_STATE_CTRL_HI_REG;
+    OrMask = 0;
+    AndMask = 0xFFFFFFFF;
+    ((ACPI_PWR_STATE_CTRL_HI_REGISTER *) &AndMask)->ClkDivisorSmafAct7 = 0;
+    ((ACPI_PWR_STATE_CTRL_HI_REGISTER *) &OrMask)->CpuPrbEnSmafAct7 = 1;
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F3x84
+
+    //Override the default setting
+    IDS_OPTION_HOOK (IDS_CACHE_FLUSH_HLT, NULL, StdHeader);
+  }
+}
+
+CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F15OrCacheFlushOnHalt =
+{
+  0,
+  SetF15OrCacheFlushOnHaltRegister
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrCoreAfterReset.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrCoreAfterReset.c
new file mode 100644
index 0000000000..4e763517e2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrCoreAfterReset.c
@@ -0,0 +1,250 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi after warm reset sequence for core P-states
+ *
+ * Performs the "Core Minimum P-State Transition Sequence After Warm Reset"
+ * as described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "OptionMultiSocket.h"
+#include "cpuF15OrCoreAfterReset.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_CPUF15ORCOREAFTERRESET_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F15OrPmCoreAfterResetPhase1OnCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+F15OrPmCoreAfterResetPhase2OnCore (
+  IN       VOID              *HwPsMaxVal,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 15h Orochi core 0 entry point for performing the necessary steps for core
+ * P-states after a warm reset has occurred.
+ *
+ * The steps are as follows:
+ *    1. Write 0 to MSRC001_0062[PstateCmd] on all cores in the processor.
+ *    2. Wait for MSRC001_0071[CurCpuFid, CurCpuDid] = [CpuFid, CpuDid] from
+ *       MSRC001_00[6B:64] indexed by MSRC001_0071[CurPstateLimit].
+ *    3. Write MSRC001_0061[PstateMaxVal] to MSRC001_0062[PstateCmd] on all
+ *       cores in the processor.
+ *    4. Wait for MSRC001_0071[CurCpuFid, CurCpuDid] = [CpuFid, CpuDid] from
+ *       MSRC001_00[6B:64] indexed by MSRC001_0061[PstateMaxVal].
+ *    5. If MSRC001_0071[CurPstateLimit] != MSRC001_0071[CurPstate], wait for
+ *       MSRC001_0071[CurCpuVid] = [CpuVid] from MSRC001_00[6B:64] indexed by
+ *       MSRC001_0061[PstateMaxVal].
+ *    6. Wait for MSRC001_0063[CurPstate] = MSRC001_0062[PstateCmd].
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParamsPtr       Service parameters
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F15OrPmCoreAfterReset (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT32       Core;
+  UINT32       HwPsMaxVal;
+  PCI_ADDR     PciAddress;
+  AP_TASK      TaskPtr;
+  IDS_SKIP_HOOK (IDS_SKIP_PM_TRANSITION_STEP, CpuEarlyParamsPtr, StdHeader) {
+
+    OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+    GetCurrentCore (&Core, StdHeader);
+    ASSERT (Core == 0);
+
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = CPTC2_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &HwPsMaxVal, StdHeader);
+    HwPsMaxVal = ((CLK_PWR_TIMING_CTRL2_REGISTER *) &HwPsMaxVal)->PstateMaxVal;
+
+    // Launch each local core to perform steps 1 through 3.
+    TaskPtr.FuncAddress.PfApTask = F15OrPmCoreAfterResetPhase1OnCore;
+    TaskPtr.DataTransfer.DataSizeInDwords = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+
+    // Launch each local core to perform steps 4 through 6.
+    TaskPtr.FuncAddress.PfApTaskI = F15OrPmCoreAfterResetPhase2OnCore;
+    TaskPtr.DataTransfer.DataSizeInDwords = 1;
+    TaskPtr.DataTransfer.DataPtr = &HwPsMaxVal;
+    TaskPtr.DataTransfer.DataTransferFlags = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F15OrPmCoreAfterReset to perform MSR initialization on all
+ * cores of a family 15h socket.
+ *
+ * This function implements steps 1 - 3 on each core.
+ *
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F15OrPmCoreAfterResetPhase1OnCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 CofvidSts;
+  UINT64 LocalMsrRegister;
+  UINT64 PstateCtrl;
+
+  // 1. Write 0 to MSRC001_0062[PstateCmd] on all cores in the processor.
+  PstateCtrl = 0;
+  LibAmdMsrWrite (MSR_PSTATE_CTL, &PstateCtrl, StdHeader);
+
+  // 2. Wait for MSRC001_0071[CurCpuFid, CurCpuDid] = [CpuFid, CpuDid] from
+  //    MSRC001_00[6B:64] indexed by MSRC001_0071[CurPstateLimit].
+  do {
+    LibAmdMsrRead (MSR_COFVID_STS, &CofvidSts, StdHeader);
+    LibAmdMsrRead ((UINT32) (MSR_PSTATE_0 + (UINT32) (((COFVID_STS_MSR *) &CofvidSts)->CurPstateLimit)), &LocalMsrRegister, StdHeader);
+  } while ((((COFVID_STS_MSR *) &CofvidSts)->CurCpuFid != ((PSTATE_MSR *) &LocalMsrRegister)->CpuFid) ||
+           (((COFVID_STS_MSR *) &CofvidSts)->CurCpuDid != ((PSTATE_MSR *) &LocalMsrRegister)->CpuDid));
+
+  // 3. Write MSRC001_0061[PstateMaxVal] to MSRC001_0062[PstateCmd] on all
+  //    cores in the processor.
+  LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &LocalMsrRegister, StdHeader);
+  ((PSTATE_CTRL_MSR *) &PstateCtrl)->PstateCmd = ((PSTATE_CURLIM_MSR *) &LocalMsrRegister)->PstateMaxVal;
+  LibAmdMsrWrite (MSR_PSTATE_CTL, &PstateCtrl, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F15OrPmCoreAfterReset to perform MSR initialization on all
+ * cores of a family 15h socket.
+ *
+ * This function implements steps 4 - 6 on each core.
+ *
+ * @param[in]  HwPsMaxVal         Index of the highest enabled HW P-state.
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F15OrPmCoreAfterResetPhase2OnCore (
+  IN       VOID              *HwPsMaxVal,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 TargetPsMsr;
+  UINT64 LocalMsrRegister;
+  UINT64 PstateCtrl;
+
+  // 4. Wait for MSRC001_0071[CurCpuFid, CurCpuDid] = [CpuFid, CpuDid] from
+  //    MSRC001_00[6B:64] indexed by D18F3xDC[PstateMaxVal].
+  LibAmdMsrRead ((*(UINT32 *) HwPsMaxVal) + MSR_PSTATE_0, &TargetPsMsr, StdHeader);
+  do {
+    LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+  } while ((((COFVID_STS_MSR *) &LocalMsrRegister)->CurCpuFid != ((PSTATE_MSR *) &TargetPsMsr)->CpuFid) ||
+           (((COFVID_STS_MSR *) &LocalMsrRegister)->CurCpuDid != ((PSTATE_MSR *) &TargetPsMsr)->CpuDid));
+
+  // 5. If MSRC001_0071[CurPstateLimit] != MSRC001_0071[CurPstate], wait for
+  //    MSRC001_0071[CurCpuVid] = [CpuVid] from MSRC001_00[6B:64] indexed by
+  //    MSRC001_0061[PstateMaxVal].
+  if (((COFVID_STS_MSR *) &LocalMsrRegister)->CurPstateLimit != ((COFVID_STS_MSR *) &LocalMsrRegister)->CurPstate) {
+    do {
+      LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+    } while ((((COFVID_STS_MSR *) &LocalMsrRegister)->CurCpuVid != ((PSTATE_MSR *) &TargetPsMsr)->CpuVid));
+  }
+
+  // 6. Wait for MSRC001_0063[CurPstate] = MSRC001_0062[PstateCmd].
+  LibAmdMsrRead (MSR_PSTATE_CTL, &PstateCtrl, StdHeader);
+  do {
+    LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+  } while (((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate != ((PSTATE_CTRL_MSR *) &PstateCtrl)->PstateCmd);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrCoreAfterReset.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrCoreAfterReset.h
new file mode 100644
index 0000000000..a2a3e748f0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrCoreAfterReset.h
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi after warm reset sequence for core P-states
+ *
+ * Contains code that provide power management functionality
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F15_OR_CORE_AFTER_RESET_H_
+#define _CPU_F15_OR_CORE_AFTER_RESET_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F15OrPmCoreAfterReset (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F15_OR_CORE_AFTER_RESET_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrDmi.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrDmi.c
new file mode 100644
index 0000000000..36824c163a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrDmi.c
@@ -0,0 +1,419 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD DMI Record Creation API, and related functions for Fmaily15h Orichi.
+ *
+ * Contains code that produce the DMI related information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 58290 $   @e \$Date: 2011-08-25 00:02:47 -0600 (Thu, 25 Aug 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuLateInit.h"
+#include "cpuF15Dmi.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_CPUF15ORDMI_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE            PstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+CONST CHAR8 ROMDATA str_Opteron_62[] = "AMD Opteron(tm) Processor 62";
+CONST CHAR8 ROMDATA str_Opteron_42[] = "AMD Opteron(tm) Processor 42";
+CONST CHAR8 ROMDATA str_Opteron_3[] = "AMD Opteron(tm) Processor 3";
+CONST CHAR8 ROMDATA str_FX_AM3[] = "AMD FX(tm)-";
+/*---------------------------------------------------------------------------------------
+ * Processor Family Table
+ *       03Dh = "AMD Opteron(TM) 6200 Processor Family"
+ *       03Eh = "AMD Opteron(TM) 4200 Processor Family"
+ *       03Fh = "AMD FX(TM) Series Processor"
+ *-------------------------------------------------------------------------------------*/
+CONST CPU_T4_PROC_FAMILY ROMDATA F15OrG34T4ProcFamily[] =
+{
+  {str_Opteron_62, 0x3D}
+};
+
+CONST CPU_T4_PROC_FAMILY ROMDATA F15OrC32T4ProcFamily[] =
+{
+  {str_Opteron_42, 0x3E}
+};
+
+CONST CPU_T4_PROC_FAMILY ROMDATA F15OrAM3T4ProcFamily[] =
+{
+  {str_FX_AM3, 0x3F},
+  {str_Opteron_3, 0xE4}
+};
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+DmiF15OrGetInfo (
+  IN OUT   CPU_TYPE_INFO *CpuInfoPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+DmiF15OrGetT4ProcFamily (
+  IN OUT   UINT8 *T4ProcFamily,
+  IN       PROC_FAMILY_TABLE *CpuDmiProcFamilyTable,
+  IN       CPU_TYPE_INFO *CpuInfo,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+UINT8
+DmiF15OrGetVoltage (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+DmiF15OrGetMemInfo (
+  IN OUT   CPU_GET_MEM_INFO  *CpuGetMemInfoPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+UINT16
+DmiF15OrGetExtClock (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DmiF15OrGetInfo
+ *
+ *    Get CPU type information
+ *
+ *    @param[in,out]  CpuInfoPtr     Pointer to CPU_TYPE_INFO struct.
+ *    @param[in]      StdHeader      Standard Head Pointer
+ *
+ */
+VOID
+DmiF15OrGetInfo (
+  IN OUT   CPU_TYPE_INFO *CpuInfoPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT8 NumOfCoresPerCU;
+  CPUID_DATA CpuId;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  LibAmdCpuidRead (AMD_CPUID_FMF, &CpuId, StdHeader);
+  CpuInfoPtr->ExtendedFamily = (UINT8) (CpuId.EAX_Reg >> 20) & 0xFF; // bit 27:20
+  CpuInfoPtr->ExtendedModel = (UINT8) (CpuId.EAX_Reg >> 16) & 0xF; // bit 19:16
+  CpuInfoPtr->BaseFamily = (UINT8) (CpuId.EAX_Reg >> 8) & 0xF; // bit 11:8
+  CpuInfoPtr->BaseModel = (UINT8) (CpuId.EAX_Reg >> 4)  & 0xF; // bit 7:4
+  CpuInfoPtr->Stepping = (UINT8) (CpuId.EAX_Reg & 0xF); // bit 3:0
+
+  CpuInfoPtr->PackageType = (UINT8) (CpuId.EBX_Reg >> 28) & 0xF; // bit 31:28
+  // Family 15h Orochi doesn't have CPUID_8000_0001_EBX[BrandId]
+  CpuInfoPtr->BrandId.Pg = 0;
+  CpuInfoPtr->BrandId.String1 = 0;
+  CpuInfoPtr->BrandId.Model = 0;
+  CpuInfoPtr->BrandId.String2 = 0;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  CpuInfoPtr->TotalCoreNumber = FamilySpecificServices->GetNumberOfPhysicalCores (FamilySpecificServices, StdHeader);
+  CpuInfoPtr->TotalCoreNumber--;
+
+  LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuId, StdHeader);
+  CpuInfoPtr->EnabledCoreNumber = (UINT8) (CpuId.ECX_Reg & 0xFF); // bit 7:0
+
+  switch (CpuInfoPtr->PackageType) {
+  case OR_SOCKET_AM3:
+    CpuInfoPtr->ProcUpgrade = P_UPGRADE_AM3;
+    break;
+  case OR_SOCKET_G34:
+    CpuInfoPtr->ProcUpgrade = P_UPGRADE_G34;
+    break;
+  case OR_SOCKET_C32:
+    CpuInfoPtr->ProcUpgrade = P_UPGRADE_C32;
+    break;
+  default:
+    CpuInfoPtr->ProcUpgrade = P_UPGRADE_UNKNOWN;
+    break;
+  }
+
+  switch (GetComputeUnitMapping (StdHeader)) {
+  case AllCoresMapping:
+    NumOfCoresPerCU = 1;
+    break;
+  case EvenCoresMapping:
+    NumOfCoresPerCU = 2;
+    break;
+  default:
+    NumOfCoresPerCU = 2;
+  }
+  LibAmdCpuidRead (AMD_CPUID_TLB_L1Cache, &CpuId, StdHeader);
+  CpuInfoPtr->L1CacheSize = (UINT32) (((UINT8) ((CpuId.ECX_Reg >> 24) * NumOfCoresPerCU) + (UINT8) (CpuId.EDX_Reg >> 24)) * (CpuInfoPtr->EnabledCoreNumber + 1) / NumOfCoresPerCU);
+
+  LibAmdCpuidRead (AMD_CPUID_L2L3Cache_L2TLB, &CpuId, StdHeader);
+  CpuInfoPtr->L2CacheSize = (UINT32) ((UINT16) (CpuId.ECX_Reg >> 16) * (CpuInfoPtr->EnabledCoreNumber + 1) / NumOfCoresPerCU);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DmiF15OrGetT4ProcFamily
+ *
+ *    Get type 4 processor family information
+ *
+ *    @param[in,out]  T4ProcFamily   Pointer to type 4 processor family information.
+ *    @param[in]      *CpuDmiProcFamilyTable  Pointer to DMI family special service
+ *    @param[in]      *CpuInfo       Pointer to CPU_TYPE_INFO struct
+ *    @param[in]      StdHeader      Standard Head Pointer
+ *
+ */
+VOID
+DmiF15OrGetT4ProcFamily (
+  IN OUT   UINT8 *T4ProcFamily,
+  IN       PROC_FAMILY_TABLE *CpuDmiProcFamilyTable,
+  IN       CPU_TYPE_INFO *CpuInfo,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  CHAR8 NameString[49];
+  CONST CHAR8 *DmiString;
+  CONST VOID  *DmiStringTable;
+  UINT8 NumberOfDmiString;
+  UINT8 i;
+
+  // Get name string from MSR_C001_00[30:35]
+  GetNameString (NameString, StdHeader);
+  // Get DMI String
+  DmiStringTable = NULL;
+  switch (CpuInfo->PackageType) {
+  case OR_SOCKET_G34:
+    DmiStringTable = (CONST VOID *) &F15OrG34T4ProcFamily[0];
+    NumberOfDmiString = sizeof (F15OrG34T4ProcFamily) / sizeof (CPU_T4_PROC_FAMILY);
+    break;
+  case OR_SOCKET_C32:
+    DmiStringTable = (CONST VOID *) &F15OrC32T4ProcFamily[0];
+    NumberOfDmiString = sizeof (F15OrC32T4ProcFamily) / sizeof (CPU_T4_PROC_FAMILY);
+    break;
+  case OR_SOCKET_AM3:
+    DmiStringTable = (CONST VOID *) &F15OrAM3T4ProcFamily[0];
+    NumberOfDmiString = sizeof (F15OrAM3T4ProcFamily) / sizeof (CPU_T4_PROC_FAMILY);
+    break;
+  default:
+    DmiStringTable = NULL;
+    NumberOfDmiString = 0;
+    break;
+  }
+
+  // Find out which DMI string matches currect processor's name string
+  *T4ProcFamily = P_FAMILY_UNKNOWN;
+  if ((DmiStringTable != NULL) && (NumberOfDmiString != 0)) {
+    for (i = 0; i < NumberOfDmiString; i++) {
+      DmiString = (((CPU_T4_PROC_FAMILY *) DmiStringTable)[i]).Stringstart;
+      if (IsSourceStrContainTargetStr (NameString, DmiString, StdHeader)) {
+        *T4ProcFamily = (((CPU_T4_PROC_FAMILY *) DmiStringTable)[i]).T4ProcFamilySetting;
+      }
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DmiF15OrGetVoltage
+ *
+ *    Get the voltage value according to SMBIOS SPEC's requirement.
+ *
+ *    @param[in]       StdHeader      Standard Head Pointer
+ *
+ *    @retval  Voltage   - CPU Voltage.
+ *
+ */
+UINT8
+DmiF15OrGetVoltage (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT8     MaxVid;
+  UINT8     Voltage;
+  UINT8     NumberBoostStates;
+  UINT32    CurrentNodeNum;
+  UINT64    MsrData;
+  PCI_ADDR  TempAddr;
+  CPB_CTRL_REGISTER CpbCtrl;
+
+  // Voltage = 0x80 + (voltage at boot time * 10)
+  GetCurrentNodeNum (&CurrentNodeNum, StdHeader);
+  TempAddr.AddressValue = MAKE_SBDFO (0, 0, (24 + CurrentNodeNum), FUNC_4, CPB_CTRL_REG);
+  LibAmdPciRead (AccessWidth32, TempAddr, &CpbCtrl, StdHeader);  // F4x15C
+  NumberBoostStates = (UINT8) CpbCtrl.NumBoostStates;
+
+  LibAmdMsrRead ((MSR_PSTATE_0 + NumberBoostStates), &MsrData, StdHeader);
+  MaxVid = (UINT8) (((PSTATE_MSR *)&MsrData)->CpuVid);
+
+
+  if ((MaxVid >= 0x7C) && (MaxVid <= 0x7F)) {
+    Voltage = 0;
+  } else {
+    Voltage = (UINT8) ((15500 - (125 * MaxVid) + 500) / 1000);
+  }
+
+  Voltage += 0x80;
+  return (Voltage);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DmiF15OrGetMemInfo
+ *
+ *    Get memory information.
+ *
+ *    @param[in,out]  CpuGetMemInfoPtr      Pointer to CPU_GET_MEM_INFO struct.
+ *    @param[in]      StdHeader             Standard Head Pointer
+ *
+ */
+VOID
+DmiF15OrGetMemInfo (
+  IN OUT   CPU_GET_MEM_INFO  *CpuGetMemInfoPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32 PciData;
+  PCI_ADDR PciAddress;
+
+  CpuGetMemInfoPtr->EccCapable = FALSE;
+  // Orochi uses the different way of access to each DCT
+  //
+  // Switch to DCT 0
+  //
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_1, 0x10C);
+  LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+  PciData &= 0xFFFFFFFE;
+  LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_2, 0x90);
+  LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+  // Check if F2x90[DimmEccEn] is set
+  if ((PciData & 0x00080000) != 0) {
+    CpuGetMemInfoPtr->EccCapable = TRUE;
+  } else {
+    //
+    // Switch to DCT 1
+    //
+    PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_1, 0x10C);
+    LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+    PciData |= 0x00000001;
+    LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+    PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_2, 0x90);
+    LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+    // Check if F2x90[DimmEccEn] is set
+    if ((PciData & 0x00080000) != 0) {
+      CpuGetMemInfoPtr->EccCapable = TRUE;
+    }
+  }
+  // Errata #505
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_1, 0x10C);
+  LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+  PciData &= 0xFFFFFFFE;
+  LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+  // Partition Row Position - 0 is for dual channel memory
+  CpuGetMemInfoPtr->PartitionRowPosition = 0;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DmiF15OrGetExtClock
+ *
+ *    Get the external clock Speed
+ *
+ *    @param[in]      StdHeader      Standard Head Pointer
+ *
+ *    @retval  ExtClock   - CPU external clock Speed.
+ *
+ */
+UINT16
+DmiF15OrGetExtClock (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  return (EXTERNAL_CLOCK_DFLT);
+}
+
+CONST PROC_FAMILY_TABLE ROMDATA ProcFamily15OrDmiTable =
+{
+// This table is for Processor family 15h Orochi
+  AMD_FAMILY_15_OR,               // ID for Family 15h Orochi
+  DmiF15OrGetInfo,                // Transfer vectors for family
+  DmiF15OrGetT4ProcFamily,        // Get type 4 processor family information
+  DmiF15OrGetVoltage,             //   specific routines (above)
+  DmiF15GetMaxSpeed,
+  DmiF15OrGetExtClock,
+  DmiF15OrGetMemInfo,             // Get memory information
+  0,
+  NULL
+};
+
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrFeatureLeveling.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrFeatureLeveling.c
new file mode 100644
index 0000000000..b1aa42f173
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrFeatureLeveling.c
@@ -0,0 +1,422 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi specific feature leveling functions.
+ *
+ * Provides feature leveling functions specific to family 15h models 00h-0Fh.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 45341 $   @e \$Date: 2011-01-14 15:49:18 -0700 (Fri, 14 Jan 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuPostInit.h"
+#include "cpuF15OrFeatureLeveling.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_CPUF15ORFEATURELEVELING_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+cpuFeatureListNeedUpdate (
+  IN       CPU_FEATURES_LIST *globalCpuFeatureList,
+  IN       CPU_FEATURES_LIST *thisCoreCpuFeatureList
+  );
+
+VOID
+STATIC
+updateCpuFeatureList (
+  IN       CPU_FEATURES_LIST *globalCpuFeatureList,
+  IN       CPU_FEATURES_LIST *thisCoreCpuFeatureList
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function get features which CPU supports.
+ *
+ *  @CpuServiceMethod{::F_CPU_SAVE_FEATURES}.
+ *
+ *  Read features from MSR_C0011004 and MSR_C0011005.
+ *
+ *    @param[in]      FamilySpecificServices   - Pointer to CPU_SPECIFIC_SERVICES struct.
+ *    @param[in,out]  cpuFeatureList           - Pointer to CPU_FEATURES_LIST struct.
+ *    @param[in]      StdHeader                - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+F15OrSaveFeatures (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN OUT   CPU_FEATURES_LIST *cpuFeatureList,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 CpuMsrData;
+  BOOLEAN *FirstTime;
+  BOOLEAN *NeedLeveling;
+  CPU_F15_OR_FEATURES *CpuF15OrFeatures;
+  CPU_F15_OR_EXT_FEATURES *CpuF15OrExtFeatures;
+  CPU_FEATURES_LIST thisCoreCpuFeatureList;
+
+  FirstTime = (BOOLEAN *) ((UINT8 *) cpuFeatureList + sizeof (CPU_FEATURES_LIST));
+  NeedLeveling = (BOOLEAN *) ((UINT8 *) cpuFeatureList + sizeof (CPU_FEATURES_LIST) + sizeof (BOOLEAN));
+
+  LibAmdMemFill (&thisCoreCpuFeatureList, 0x0, sizeof (CPU_FEATURES_LIST), StdHeader);
+  LibAmdMsrRead (MSR_CPUID_FEATS, &CpuMsrData, StdHeader);
+  CpuF15OrFeatures = (CPU_F15_OR_FEATURES *) &CpuMsrData;
+
+  thisCoreCpuFeatureList.APIC = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.APIC;
+  thisCoreCpuFeatureList.CLFSH = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.CLFSH;
+  thisCoreCpuFeatureList.CMOV = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.CMOV;
+  thisCoreCpuFeatureList.CMPXCHG8B = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.CMPXCHG8B;
+  thisCoreCpuFeatureList.DE = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.DE;
+  thisCoreCpuFeatureList.FPU = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.FPU;
+  thisCoreCpuFeatureList.FXSR = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.FXSR;
+  thisCoreCpuFeatureList.HTT = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.HTT;
+  thisCoreCpuFeatureList.MCA = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.MCA;
+  thisCoreCpuFeatureList.MCE = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.MCE;
+  thisCoreCpuFeatureList.MMX = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.MMX;
+  thisCoreCpuFeatureList.MSR = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.MSR;
+  thisCoreCpuFeatureList.MTRR = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.MTRR;
+  thisCoreCpuFeatureList.PAE = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.PAE;
+  thisCoreCpuFeatureList.PAT = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.PAT;
+  thisCoreCpuFeatureList.PGE = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.PGE;
+  thisCoreCpuFeatureList.PSE = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.PSE;
+  thisCoreCpuFeatureList.PSE36 = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.PSE36;
+  thisCoreCpuFeatureList.SSE = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.SSE;
+  thisCoreCpuFeatureList.SSE2 = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.SSE2;
+  thisCoreCpuFeatureList.SysEnterSysExit = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.SysEnterSysExit;
+  thisCoreCpuFeatureList.TimeStampCounter = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.TimeStampCounter;
+  thisCoreCpuFeatureList.VME = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesLo.VME;
+
+  thisCoreCpuFeatureList.AES = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.AES;
+  thisCoreCpuFeatureList.AVX = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.AVX;
+  thisCoreCpuFeatureList.CMPXCHG16B = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.CMPXCHG16B;
+  thisCoreCpuFeatureList.Monitor = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.Monitor;
+  thisCoreCpuFeatureList.OSXSAVE = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.OSXSAVE;
+  thisCoreCpuFeatureList.PCLMULQDQ = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.PCLMULQDQ;
+  thisCoreCpuFeatureList.POPCNT = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.POPCNT;
+  thisCoreCpuFeatureList.SSE3 = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.SSE3;
+  thisCoreCpuFeatureList.SSE41 = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.SSE41;
+  thisCoreCpuFeatureList.SSE42 = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.SSE42;
+  thisCoreCpuFeatureList.SSSE3 = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.SSSE3;
+  thisCoreCpuFeatureList.X2APIC = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.X2APIC;
+  thisCoreCpuFeatureList.XSAVE = (UINT8) CpuF15OrFeatures->CpuF15OrFeaturesHi.XSAVE;
+
+  LibAmdMsrRead (MSR_CPUID_EXT_FEATS, &CpuMsrData, StdHeader);
+  CpuF15OrExtFeatures = (CPU_F15_OR_EXT_FEATURES *) &CpuMsrData;
+
+  thisCoreCpuFeatureList.ThreeDNow = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.ThreeDNow;
+  thisCoreCpuFeatureList.ThreeDNowExt = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.ThreeDNowExt;
+  thisCoreCpuFeatureList.APIC = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.APIC;
+  thisCoreCpuFeatureList.CMOV = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.CMOV;
+  thisCoreCpuFeatureList.CMPXCHG8B = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.CMPXCHG8B;
+  thisCoreCpuFeatureList.DE = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.DE;
+  thisCoreCpuFeatureList.FFXSR = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.FFXSR;
+  thisCoreCpuFeatureList.FPU = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.FPU;
+  thisCoreCpuFeatureList.FXSR = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.FXSR;
+  thisCoreCpuFeatureList.LM = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.LM;
+  thisCoreCpuFeatureList.MCA = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MCA;
+  thisCoreCpuFeatureList.MCE = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MCE;
+  thisCoreCpuFeatureList.MMX = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MMX;
+  thisCoreCpuFeatureList.MmxExt = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MmxExt;
+  thisCoreCpuFeatureList.MSR = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MSR;
+  thisCoreCpuFeatureList.MTRR = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MTRR;
+  thisCoreCpuFeatureList.NX = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.NX;
+  thisCoreCpuFeatureList.PAE = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.PAE;
+  thisCoreCpuFeatureList.Page1GB = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.Page1GB;
+  thisCoreCpuFeatureList.PAT = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.PAT;
+  thisCoreCpuFeatureList.PGE = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.PGE;
+  thisCoreCpuFeatureList.PSE = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.PSE;
+  thisCoreCpuFeatureList.PSE36 = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.PSE36;
+  thisCoreCpuFeatureList.RDTSCP = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.RDTSCP;
+  thisCoreCpuFeatureList.SysCallSysRet = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.SysCallSysRet;
+  thisCoreCpuFeatureList.TimeStampCounter = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.TimeStampCounter;
+  thisCoreCpuFeatureList.VME = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.VME;
+
+  thisCoreCpuFeatureList.ThreeDNowPrefetch = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.ThreeDNowPrefetch;
+  thisCoreCpuFeatureList.ABM = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.ABM;
+  thisCoreCpuFeatureList.AltMovCr8 = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.AltMovCr8;
+  thisCoreCpuFeatureList.CmpLegacy = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.CmpLegacy;
+  thisCoreCpuFeatureList.ExtApicSpace = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.ExtApicSpace;
+  thisCoreCpuFeatureList.IBS = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.IBS;
+  thisCoreCpuFeatureList.LahfSahf = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.LahfSahf;
+  thisCoreCpuFeatureList.MisAlignSse = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.MisAlignSse;
+  thisCoreCpuFeatureList.OSVW = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.OSVM;
+  thisCoreCpuFeatureList.SKINIT = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.SKINIT;
+  thisCoreCpuFeatureList.SSE4A = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.SSE4A;
+  thisCoreCpuFeatureList.SVM = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.SVM;
+  thisCoreCpuFeatureList.WDT = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.WDT;
+  thisCoreCpuFeatureList.NodeId = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.NodeId;
+  thisCoreCpuFeatureList.XOP = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.XOP;
+  thisCoreCpuFeatureList.TBM0 = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.TBM0;
+  thisCoreCpuFeatureList.LWP = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.LWP;
+  thisCoreCpuFeatureList.FMA4 = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.FMA4;
+  thisCoreCpuFeatureList.TCE = (UINT8) CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.TCE;
+
+  if (*FirstTime) {
+    updateCpuFeatureList (cpuFeatureList, &thisCoreCpuFeatureList);
+    *FirstTime = FALSE;
+  } else if (cpuFeatureListNeedUpdate (cpuFeatureList, &thisCoreCpuFeatureList)) {
+    updateCpuFeatureList (cpuFeatureList, &thisCoreCpuFeatureList);
+    *NeedLeveling = TRUE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function set features which All CPUs support.
+ *
+ *  @CpuServiceMethod{::F_CPU_WRITE_FEATURES}.
+ *
+ *  Write least common features to MSR_C0011004 and MSR_C0011005.
+ *
+ *    @param[in]      FamilySpecificServices   - Pointer to CPU_SPECIFIC_SERVICES struct.
+ *    @param[in,out]  cpuFeatureList           - Pointer to CPU_FEATURES_LIST struct.
+ *    @param[in]      StdHeader                - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+F15OrWriteFeatures (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN OUT   CPU_FEATURES_LIST *cpuFeatureList,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 CpuMsrData;
+  CPU_F15_OR_FEATURES *CpuF15OrFeatures;
+  CPU_F15_OR_EXT_FEATURES *CpuF15OrExtFeatures;
+
+  CpuMsrData = 0;
+  CpuF15OrFeatures = (CPU_F15_OR_FEATURES *) &CpuMsrData;
+
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.APIC = cpuFeatureList->APIC;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.CLFSH = cpuFeatureList->CLFSH;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.CMOV = cpuFeatureList->CMOV;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.CMPXCHG8B = cpuFeatureList->CMPXCHG8B;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.DE = cpuFeatureList->DE;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.FPU = cpuFeatureList->FPU;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.FXSR = cpuFeatureList->FXSR;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.HTT = cpuFeatureList->HTT;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.MCA = cpuFeatureList->MCA;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.MCE = cpuFeatureList->MCE;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.MMX = cpuFeatureList->MMX;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.MSR = cpuFeatureList->MSR;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.MTRR = cpuFeatureList->MTRR;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.PAE = cpuFeatureList->PAE;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.PAT = cpuFeatureList->PAT;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.PGE = cpuFeatureList->PGE;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.PSE = cpuFeatureList->PSE;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.PSE36 = cpuFeatureList->PSE36;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.SSE = cpuFeatureList->SSE;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.SSE2 = cpuFeatureList->SSE2;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.SysEnterSysExit = cpuFeatureList->SysEnterSysExit;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.TimeStampCounter = cpuFeatureList->TimeStampCounter;
+  CpuF15OrFeatures->CpuF15OrFeaturesLo.VME = cpuFeatureList->VME;
+
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.AES = cpuFeatureList->AES;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.AVX = cpuFeatureList->AVX;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.CMPXCHG16B = cpuFeatureList->CMPXCHG16B;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.Monitor = cpuFeatureList->Monitor;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.OSXSAVE = cpuFeatureList->OSXSAVE;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.PCLMULQDQ = cpuFeatureList->PCLMULQDQ;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.POPCNT = cpuFeatureList->POPCNT;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.SSE3 = cpuFeatureList->SSE3;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.SSE41 = cpuFeatureList->SSE41;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.SSE42 = cpuFeatureList->SSE42;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.SSSE3 = cpuFeatureList->SSSE3;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.X2APIC = cpuFeatureList->X2APIC;
+  CpuF15OrFeatures->CpuF15OrFeaturesHi.XSAVE = cpuFeatureList->XSAVE;
+
+  LibAmdMsrWrite (MSR_CPUID_FEATS, &CpuMsrData, StdHeader);
+
+  CpuMsrData = 0;
+  CpuF15OrExtFeatures = (CPU_F15_OR_EXT_FEATURES *) &CpuMsrData;
+
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.ThreeDNow = cpuFeatureList->ThreeDNow;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.ThreeDNowExt = cpuFeatureList->ThreeDNowExt;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.APIC = cpuFeatureList->APIC;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.CMOV = cpuFeatureList->CMOV;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.CMPXCHG8B = cpuFeatureList->CMPXCHG8B;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.DE = cpuFeatureList->DE;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.FFXSR = cpuFeatureList->FFXSR;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.FPU = cpuFeatureList->FPU;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.FXSR = cpuFeatureList->FXSR;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.LM = cpuFeatureList->LM;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MCA = cpuFeatureList->MCA;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MCE = cpuFeatureList->MCE;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MMX = cpuFeatureList->MMX;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MmxExt = cpuFeatureList->MmxExt;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MSR = cpuFeatureList->MSR;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.MTRR = cpuFeatureList->MTRR;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.NX = cpuFeatureList->NX;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.PAE = cpuFeatureList->PAE;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.Page1GB = cpuFeatureList->Page1GB;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.PAT = cpuFeatureList->PAT;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.PGE = cpuFeatureList->PGE;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.PSE = cpuFeatureList->PSE;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.PSE36 = cpuFeatureList->PSE36;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.RDTSCP = cpuFeatureList->RDTSCP;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.SysCallSysRet = cpuFeatureList->SysCallSysRet;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.TimeStampCounter = cpuFeatureList->TimeStampCounter;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesLo.VME = cpuFeatureList->VME;
+
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.ThreeDNowPrefetch = cpuFeatureList->ThreeDNowPrefetch;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.ABM = cpuFeatureList->ABM;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.AltMovCr8 = cpuFeatureList->AltMovCr8;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.CmpLegacy = cpuFeatureList->CmpLegacy;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.ExtApicSpace = cpuFeatureList->ExtApicSpace;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.IBS = cpuFeatureList->IBS;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.LahfSahf = cpuFeatureList->LahfSahf;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.MisAlignSse = cpuFeatureList->MisAlignSse;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.OSVM = cpuFeatureList->OSVW;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.SKINIT = cpuFeatureList->SKINIT;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.SSE4A = cpuFeatureList->SSE4A;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.SVM = cpuFeatureList->SVM;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.WDT = cpuFeatureList->WDT;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.NodeId = cpuFeatureList->NodeId;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.XOP = cpuFeatureList->XOP;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.TBM0 = cpuFeatureList->TBM0;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.LWP = cpuFeatureList->LWP;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.FMA4 = cpuFeatureList->FMA4;
+  CpuF15OrExtFeatures->CpuF15OrExtFeaturesHi.TCE = cpuFeatureList->TCE;
+
+  LibAmdMsrWrite (MSR_CPUID_EXT_FEATS, &CpuMsrData, StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  cpuFeatureListNeedUpdate
+ *
+ *    Compare global CPU feature list with this core feature list to see if global CPU feature list
+ *    needs updated.
+ *
+ *    @param[in]  globalCpuFeatureList  - Pointer to global CPU Feature List.
+ *    @param[in]  thisCoreCpuFeatureList  - Pointer to this core CPU Feature List.
+ *
+ *    @retval FALSE  globalCpuFeatureList is equal to thisCoreCpuFeatureList
+ *    @retval True  globalCpuFeatureList is NOT equal to thisCoreCpuFeatureList
+ */
+BOOLEAN
+STATIC
+cpuFeatureListNeedUpdate (
+  IN       CPU_FEATURES_LIST *globalCpuFeatureList,
+  IN       CPU_FEATURES_LIST *thisCoreCpuFeatureList
+  )
+{
+  BOOLEAN flag;
+  UINT8 *global;
+  UINT8 *thisCore;
+  UINT8 i;
+
+  flag = FALSE;
+  global = (UINT8 *) globalCpuFeatureList;
+  thisCore = (UINT8 *) thisCoreCpuFeatureList;
+
+  for (i = 0; i < sizeof (CPU_FEATURES_LIST); i++) {
+    if ((*global) != (*thisCore)) {
+      flag = TRUE;
+      break;
+    }
+    global++;
+    thisCore++;
+  }
+  return flag;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  updateCpuFeatureList
+ *
+ *    Update global CPU feature list
+ *
+ *    @param[in]  globalCpuFeatureList  - Pointer to global CPU Feature List.
+ *    @param[in]  thisCoreCpuFeatureList  - Pointer to this core CPU Feature List.
+ *
+ */
+VOID
+STATIC
+updateCpuFeatureList (
+  IN       CPU_FEATURES_LIST *globalCpuFeatureList,
+  IN       CPU_FEATURES_LIST *thisCoreCpuFeatureList
+  )
+{
+  UINT8 *globalFeatureList;
+  UINT8 *thisCoreFeatureList;
+  UINT32 sizeInByte;
+
+  globalFeatureList = (UINT8 *) globalCpuFeatureList;
+  thisCoreFeatureList = (UINT8 *) thisCoreCpuFeatureList;
+
+  for (sizeInByte = 0; sizeInByte < sizeof (CPU_FEATURES_LIST); sizeInByte++) {
+    *globalFeatureList &= *thisCoreFeatureList;
+    globalFeatureList++;
+    thisCoreFeatureList++;
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrFeatureLeveling.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrFeatureLeveling.h
new file mode 100644
index 0000000000..dd644d6392
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrFeatureLeveling.h
@@ -0,0 +1,211 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi specific feature leveling functions.
+ *
+ * Provides feature leveling functions specific to family 15h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 45341 $   @e \$Date: 2011-01-14 15:49:18 -0700 (Fri, 14 Jan 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F15_OR_FEATURE_LEVELING_H_
+#define _CPU_F15_OR_FEATURE_LEVELING_H_
+
+#include "cpuFamilyTranslation.h"
+#include "cpuPostInit.h"
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// F15 Orochi CPU Feature Low
+typedef struct {
+  UINT32 FPU:1;               ///< Bit0
+  UINT32 VME:1;               ///< Bit1
+  UINT32 DE:1;                ///< Bit2
+  UINT32 PSE:1;               ///< Bit3
+  UINT32 TimeStampCounter:1;  ///< Bit4
+  UINT32 MSR:1;               ///< Bit5
+  UINT32 PAE:1;               ///< Bit6
+  UINT32 MCE:1;               ///< Bit7
+  UINT32 CMPXCHG8B:1;         ///< Bit8
+  UINT32 APIC:1;              ///< Bit9
+  UINT32 :1;                  ///< Bit10
+  UINT32 SysEnterSysExit:1;   ///< Bit11
+  UINT32 MTRR:1;              ///< Bit12
+  UINT32 PGE:1;               ///< Bit13
+  UINT32 MCA:1;               ///< Bit14
+  UINT32 CMOV:1;              ///< Bit15
+  UINT32 PAT:1;               ///< Bit16
+  UINT32 PSE36:1;             ///< Bit17
+  UINT32 :1;                  ///< Bit18
+  UINT32 CLFSH:1;             ///< Bit19
+  UINT32 :3;                  ///< Bit20~22
+  UINT32 MMX:1;               ///< Bit23
+  UINT32 FXSR:1;              ///< Bit24
+  UINT32 SSE:1;               ///< Bit25
+  UINT32 SSE2:1;              ///< Bit26
+  UINT32 :1;                  ///< Bit27
+  UINT32 HTT:1;               ///< Bit28
+  UINT32 :3;                  ///< Bit29~31
+} CPU_F15_OR_FEATURES_LO;
+
+/// F15 Orochi CPU Feature High
+typedef struct {
+  UINT32 SSE3:1;            ///< Bit0
+  UINT32 PCLMULQDQ:1;       ///< Bit1
+  UINT32 :1;                ///< Bit2
+  UINT32 Monitor:1;         ///< Bit3
+  UINT32 :5;                ///< Bit4~8
+  UINT32 SSSE3:1;           ///< Bit9
+  UINT32 :3;                ///< Bit10~12
+  UINT32 CMPXCHG16B:1;      ///< Bit13
+  UINT32 :5;                ///< Bit14~18
+  UINT32 SSE41:1;           ///< Bit19
+  UINT32 SSE42:1;           ///< Bit20
+  UINT32 X2APIC:1;          ///< Bit21
+  UINT32 :1;                ///< Bit22
+  UINT32 POPCNT:1;          ///< Bit23
+  UINT32 :1;                ///< Bit24
+  UINT32 AES:1;             ///< Bit25
+  UINT32 XSAVE:1;           ///< Bit26
+  UINT32 OSXSAVE:1;         ///< Bit27
+  UINT32 AVX:1;             ///< Bit28
+  UINT32 :3;                ///< Bit29~32
+} CPU_F15_OR_FEATURES_HI;
+
+/// F15 Orochi CPU Feature
+typedef struct {
+  CPU_F15_OR_FEATURES_LO CpuF15OrFeaturesLo; ///< Low
+  CPU_F15_OR_FEATURES_HI CpuF15OrFeaturesHi; ///< High
+} CPU_F15_OR_FEATURES;
+
+/// F15 Orochi CPU Extended Feature Low
+typedef struct {
+  UINT32 FPU:1;               ///< Bit0
+  UINT32 VME:1;               ///< Bit1
+  UINT32 DE:1;                ///< Bit2
+  UINT32 PSE:1;               ///< Bit3
+  UINT32 TimeStampCounter:1;  ///< Bit4
+  UINT32 MSR:1;               ///< Bit5
+  UINT32 PAE:1;               ///< Bit6
+  UINT32 MCE:1;               ///< Bit7
+  UINT32 CMPXCHG8B:1;         ///< Bit8
+  UINT32 APIC:1;              ///< Bit9
+  UINT32 :1;                  ///< Bit10
+  UINT32 SysCallSysRet:1;     ///< Bit11
+  UINT32 MTRR:1;              ///< Bit12
+  UINT32 PGE:1;               ///< Bit13
+  UINT32 MCA:1;               ///< Bit14
+  UINT32 CMOV:1;              ///< Bit15
+  UINT32 PAT:1;               ///< Bit16
+  UINT32 PSE36:1;             ///< Bit17
+  UINT32 :2;                  ///< Bit18~19
+  UINT32 NX:1;                ///< Bit20
+  UINT32 :1;                  ///< Bit21
+  UINT32 MmxExt:1;            ///< Bit22
+  UINT32 MMX:1;               ///< Bit23
+  UINT32 FXSR:1;              ///< Bit24
+  UINT32 FFXSR:1;             ///< Bit25
+  UINT32 Page1GB:1;           ///< Bit26
+  UINT32 RDTSCP:1;            ///< Bit27
+  UINT32 :1;                  ///< Bit28
+  UINT32 LM:1;                ///< Bit29
+  UINT32 ThreeDNowExt:1;      ///< Bit30
+  UINT32 ThreeDNow:1;         ///< Bit31
+} CPU_F15_OR_EXT_FEATURES_LO;
+
+/// F15 Orochi CPU Extended Feature High
+typedef struct {
+  UINT32 LahfSahf:1;        ///< Bit0
+  UINT32 CmpLegacy:1;       ///< Bit1
+  UINT32 SVM:1;             ///< Bit2
+  UINT32 ExtApicSpace:1;    ///< Bit3
+  UINT32 AltMovCr8:1;       ///< Bit4
+  UINT32 ABM:1;             ///< Bit5
+  UINT32 SSE4A:1;           ///< Bit6
+  UINT32 MisAlignSse:1;     ///< Bit7
+  UINT32 ThreeDNowPrefetch:1; ///< Bit8
+  UINT32 OSVM:1;            ///< Bit9
+  UINT32 IBS:1;             ///< Bit10
+  UINT32 XOP:1;             ///< Bit11
+  UINT32 SKINIT:1;          ///< Bit12
+  UINT32 WDT:1;             ///< Bit13
+  UINT32 TBM0:1;            ///< Bit14
+  UINT32 LWP:1;             ///< Bit15
+  UINT32 FMA4:1;            ///< Bit16
+  UINT32 TCE:1;             ///< Bit17
+  UINT32 :1;                ///< Bit18
+  UINT32 NodeId:1;          ///< Bit19
+  UINT32 :12;               ///< Bit20~31
+} CPU_F15_OR_EXT_FEATURES_HI;
+
+/// F15 Orochi CPU Extended Feature
+typedef struct {
+  CPU_F15_OR_EXT_FEATURES_LO CpuF15OrExtFeaturesLo;  ///< Low
+  CPU_F15_OR_EXT_FEATURES_HI CpuF15OrExtFeaturesHi;  ///< High
+} CPU_F15_OR_EXT_FEATURES;
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F15OrSaveFeatures (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN OUT   CPU_FEATURES_LIST *cpuFeatureList,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+F15OrWriteFeatures (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN OUT   CPU_FEATURES_LIST *cpuFeatureList,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+#endif  // _CPU_F15_OR_FEATURE_LEVELING_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrNbAfterReset.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrNbAfterReset.c
new file mode 100644
index 0000000000..0d6b115b9d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrNbAfterReset.c
@@ -0,0 +1,349 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi after warm reset sequence for NB P-states
+ *
+ * Performs the "NB COF and VID Transition Sequence After Warm Reset"
+ * as described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "OptionMultiSocket.h"
+#include "cpuF15OrNbAfterReset.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_CPUF15ORNBAFTERRESET_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F15OrPmNbAfterResetOnCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+TransitionToNbLow (
+  IN       PCI_ADDR           PciAddress,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+STATIC
+TransitionToNbHigh (
+  IN       PCI_ADDR           PciAddress,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+STATIC
+WaitForNbTransitionToComplete (
+  IN       PCI_ADDR           PciAddress,
+  IN       UINT32             PstateIndex,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 15h Orochi core 0 entry point for performing the necessary steps after
+ * a warm reset has occurred.
+ *
+ * The steps are as follows:
+ *    1. Temp1 = D18F5x170[SwNbPstateLoDis].
+ *    2. Temp2 = D18F5x170[NbPstateDisOnP0].
+ *    3. Temp3 = D18F5x170[NbPstateThreshold].
+ *    4. If MSRC001_0070[NbPstate] = 1, go to step 9.
+ *    5. Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
+ *    6. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid,
+ *       CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
+ *    7. Set D18F5x170[SwNbPstateLoDis] = 1.
+ *    8. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid,
+ *       CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi].
+ *       Go to step 13.
+ *    9. Set D18F5x170[SwNbPstateLoDis] = 1.
+ *   10. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid,
+ *       CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi].
+ *   11. Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
+ *   12. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid,
+ *       CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
+ *   13. Set D18F5x170[SwNbPstateLoDis] = Temp1, D18F5x170[NbPstateDisOnP0] = Temp2, and
+ *       D18F5x170[NbPstateThreshold] = Temp3.
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParamsPtr       Service parameters
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F15OrPmNbAfterReset (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT32    Socket;
+  UINT32    Module;
+  UINT32    Core;
+  UINT32    TaskedCore;
+  UINT32    Ignored;
+  AP_TASK   TaskPtr;
+  AGESA_STATUS IgnoredSts;
+
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+
+  ASSERT (Core == 0);
+
+  // Launch one core per node.
+  TaskPtr.FuncAddress.PfApTask = F15OrPmNbAfterResetOnCore;
+  TaskPtr.DataTransfer.DataSizeInDwords = 0;
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetGivenModuleCoreRange (Socket, Module, &TaskedCore, &Ignored, StdHeader)) {
+      if (TaskedCore != 0) {
+        ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) TaskedCore, &TaskPtr, StdHeader);
+      }
+    }
+  }
+  ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, (VOID *) CpuEarlyParamsPtr);
+}
+
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F15OrPmNbAfterReset to perform MSR initialization on one
+ * core of each die in a family 15h socket.
+ *
+ * This function implements steps 1 - 13 on each core.
+ *
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F15OrPmNbAfterResetOnCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32    NbPsCtrlOnEntry;
+  UINT32    NbPsCtrlOnExit;
+  UINT64    LocalMsrRegister;
+  PCI_ADDR  PciAddress;
+
+  // 1. Temp1 = D18F5x170[SwNbPstateLoDis].
+  // 2. Temp2 = D18F5x170[NbPstateDisOnP0].
+  // 3. Temp3 = D18F5x170[NbPstateThreshold].
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+
+  PciAddress.Address.Function = FUNC_5;
+  PciAddress.Address.Register = NB_PSTATE_CTRL;
+  LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrlOnEntry, StdHeader);
+
+  // Check if NB P-states were disabled, and if so, prevent any changes from occurring.
+  if (((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnEntry)->NbPstateMaxVal != 0) {
+    // 4. If MSRC001_0070[NbPstate] = 1, go to step 9
+    LibAmdMsrRead (MSR_COFVID_CTL, &LocalMsrRegister, StdHeader);
+    if (((COFVID_CTRL_MSR *) &LocalMsrRegister)->NbPstate == 0) {
+      // 5. Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
+      // 6. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid,
+      //    CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
+      TransitionToNbLow (PciAddress, StdHeader);
+
+      // 7. Set D18F5x170[SwNbPstateLoDis] = 1.
+      // 8. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid,
+      //    CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi].
+      //    Go to step 13.
+      TransitionToNbHigh (PciAddress, StdHeader);
+    } else {
+      // 9. Set D18F5x170[SwNbPstateLoDis] = 1.
+      // 10. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid,
+      //     CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi].
+      TransitionToNbHigh (PciAddress, StdHeader);
+
+      // 11. Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
+      // 12. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid,
+      //     CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
+      TransitionToNbLow (PciAddress, StdHeader);
+    }
+
+    // 13. Set D18F5x170[SwNbPstateLoDis] = Temp1, D18F5x170[NbPstateDisOnP0] = Temp2, and
+    //     D18F5x170[NbPstateThreshold] = Temp3.
+    LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrlOnExit, StdHeader);
+    ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnExit)->SwNbPstateLoDis = ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnEntry)->SwNbPstateLoDis;
+    ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnExit)->NbPstateDisOnP0 = ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnEntry)->NbPstateDisOnP0;
+    ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnExit)->NbPstateThreshold = ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnEntry)->NbPstateThreshold;
+    LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrlOnExit, StdHeader);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F15OrPmNbAfterResetOnCore to transition to the low NB P-state.
+ *
+ * This function implements steps 5, 6, 11, and 12 as needed.
+ *
+ * @param[in]  PciAddress         Segment, bus, device number of the node to transition.
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+TransitionToNbLow (
+  IN       PCI_ADDR           PciAddress,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32   NbPsCtrl;
+
+  // 5/11. Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
+  PciAddress.Address.Function = FUNC_5;
+  PciAddress.Address.Register = NB_PSTATE_CTRL;
+  LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+  ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->SwNbPstateLoDis = 0;
+  ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateDisOnP0 = 0;
+  ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateThreshold = 0;
+  LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+
+  // 6/12. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid,
+  //       CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
+  WaitForNbTransitionToComplete (PciAddress, ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateLo, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F15OrPmNbAfterResetOnCore to transition to the high NB P-state.
+ *
+ * This function implements steps 7, 8, 9, and 10 as needed.
+ *
+ * @param[in]  PciAddress         Segment, bus, device number of the node to transition.
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+TransitionToNbHigh (
+  IN       PCI_ADDR           PciAddress,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32   NbPsCtrl;
+
+  // 7/9. Set D18F5x170[SwNbPstateLoDis] = 1.
+  PciAddress.Address.Function = FUNC_5;
+  PciAddress.Address.Register = NB_PSTATE_CTRL;
+  LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+  ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->SwNbPstateLoDis = 1;
+  LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+
+  // 8/10. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid,
+  //       CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi].
+  WaitForNbTransitionToComplete (PciAddress, ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateHi, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F15OrPmAfterResetCore to wait for NB FID and DID to
+ * match a specific P-state.
+ *
+ * This function implements steps 6, 8, 10, and 12 as needed.
+ *
+ * @param[in]  PciAddress         Segment, bus, device number of the node to transition.
+ * @param[in]  PstateIndex        P-state settings to match.
+ * @param[in]  StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+WaitForNbTransitionToComplete (
+  IN       PCI_ADDR           PciAddress,
+  IN       UINT32             PstateIndex,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32   TargetNbPs;
+  UINT32   NbPsSts;
+
+  PciAddress.Address.Function = FUNC_5;
+  PciAddress.Address.Register = NB_PSTATE_0 + (PstateIndex << 2);
+  LibAmdPciRead (AccessWidth32, PciAddress, &TargetNbPs, StdHeader);
+  PciAddress.Address.Register = NB_PSTATE_STATUS;
+  do {
+    LibAmdPciRead (AccessWidth32, PciAddress, &NbPsSts, StdHeader);
+  } while ((((NB_PSTATE_STS_REGISTER *) &NbPsSts)->CurNbPstate != PstateIndex ||
+           (((NB_PSTATE_STS_REGISTER *) &NbPsSts)->CurNbFid != ((NB_PSTATE_REGISTER *) &TargetNbPs)->NbFid)) ||
+           (((NB_PSTATE_STS_REGISTER *) &NbPsSts)->CurNbDid != ((NB_PSTATE_REGISTER *) &TargetNbPs)->NbDid));
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrNbAfterReset.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrNbAfterReset.h
new file mode 100644
index 0000000000..710d43db4f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrNbAfterReset.h
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi after warm reset sequence for NB P-states
+ *
+ * Contains code that provide power management functionality
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F15_OR_NB_AFTER_RESET_H_
+#define _CPU_F15_OR_NB_AFTER_RESET_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F15OrPmNbAfterReset (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F15_OR_NB_AFTER_RESET_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrPowerMgmt.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrPowerMgmt.h
new file mode 100644
index 0000000000..5d66252c9b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrPowerMgmt.h
@@ -0,0 +1,534 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi Power Management related stuff
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 60669 $   @e \$Date: 2011-10-19 17:17:41 -0600 (Wed, 19 Oct 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F15_OR_POWERMGMT_H_
+#define _CPU_F15_OR_POWERMGMT_H_
+
+/*
+ * Family 15h Orochi CPU Power Management MSR definitions
+ *
+ */
+
+
+/* Interrupt Pending and CMP-Halt MSR Register 0xC0010055 */
+#define MSR_INTPEND 0xC0010055
+
+/// Interrupt Pending and CMP-Halt MSR Register
+typedef struct {
+  UINT64 IoMsgAddr:16;               ///< IO message address
+  UINT64 IoMsgData:8;                ///< IO message data
+  UINT64 IntrPndMsgDis:1;            ///< Interrupt pending message disable
+  UINT64 IntrPndMsg:1;               ///< Interrupt pending message
+  UINT64 IoRd:1;                     ///< IO read
+  UINT64 :2;                         ///< Reserved
+  UINT64 BmStsClrOnHltEn:1;          ///< Clear BM status bit on server C1e entry
+  UINT64 :34;                        ///< Reserved
+} INTPEND_MSR;
+
+
+/* P-state Registers 0xC001006[B:4] */
+
+/// P-state MSR
+typedef struct {
+  UINT64 CpuFid:6;                   ///< CpuFid
+  UINT64 CpuDid:3;                   ///< CpuDid
+  UINT64 CpuVid:7;                   ///< CpuVid
+  UINT64 :6;                         ///< Reserved
+  UINT64 NbPstate:1;                 ///< NbPstate
+  UINT64 :9;                         ///< Reserved
+  UINT64 IddValue:8;                 ///< IddValue
+  UINT64 IddDiv:2;                   ///< IddDiv
+  UINT64 :21;                        ///< Reserved
+  UINT64 PsEnable:1;                 ///< Pstate Enable
+} PSTATE_MSR;
+
+
+/* COFVID Control Register 0xC0010070 */
+#define MSR_COFVID_CTL 0xC0010070
+
+/// COFVID Control MSR Register
+typedef struct {
+  UINT64 CpuFid:6;                   ///< CpuFid
+  UINT64 CpuDid:3;                   ///< CpuDid
+  UINT64 CpuVid:7;                   ///< CpuVid
+  UINT64 PstateId:3;                 ///< Pstate ID
+  UINT64 :3;                         ///< Reserved
+  UINT64 NbPstate:1;                 ///< Northbridge P-state
+  UINT64 :41;                        ///< Reserved
+} COFVID_CTRL_MSR;
+
+
+/* COFVID Status Register 0xC0010071 */
+#define MSR_COFVID_STS 0xC0010071
+
+/// COFVID Status MSR Register
+typedef struct {
+  UINT64 CurCpuFid:6;                ///< Current CpuFid
+  UINT64 CurCpuDid:3;                ///< Current CpuDid
+  UINT64 CurCpuVid:7;                ///< Current CpuVid
+  UINT64 CurPstate:3;                ///< Current Pstate
+  UINT64 :3;                         ///< Reserved
+  UINT64 CurNbDid:1;                 ///< Current NbDid
+  UINT64 :2;                         ///< Reserved
+  UINT64 CurNbVid:7;                 ///< Current NbVid
+  UINT64 StartupPstate:3;            ///< Startup Pstate
+  UINT64 MaxVid:7;                   ///< MaxVid
+  UINT64 MinVid:7;                   ///< MinVid
+  UINT64 MaxCpuCof:6;                ///< MaxCpuCof
+  UINT64 :1;                         ///< Reserved
+  UINT64 CurPstateLimit:3;           ///< Current Pstate Limit
+  UINT64 MaxNbCof:5;                 ///< MaxNbCof
+} COFVID_STS_MSR;
+
+/* Floating Point Configuration Register 0xC0011028 */
+#define MSR_FP_CFG 0xC0011028
+
+/// Floating Point Configuration MSR Register
+typedef struct {
+  UINT64 :16;                        ///< Reserved
+  UINT64 DiDtMode:1;                 ///< Di/Dt Mode
+  UINT64 :1;                         ///< Reserved
+  UINT64 DiDtCfg0:5;                 ///< Di/Dt Config 0
+  UINT64 :2;                         ///< Reserved
+  UINT64 AlwaysOnThrottle:2;         ///< AlwaysOnThrottle
+  UINT64 DiDtCfg1:8;                 ///< Di/Dt Config 1
+  UINT64 :5;                         ///< Reserved
+  UINT64 Pipe3ThrottleDis:1;         ///< Pipe3ThrottleDis
+  UINT64 :23;                        ///< Reserved
+} FP_CFG_MSR;
+
+/*
+ * Family 15h Orochi CPU Power Management PCI definitions
+ *
+ */
+
+/* Link transaction control register F0x68 */
+#define LTC_REG 0x68
+
+/// Link Transaction Control Register
+typedef struct {
+  UINT32 :12;                         ///< Reserved
+  UINT32 ATMModeEn:1;                 ///< Accelerated transition to modified mode enable
+  UINT32 :19;                         ///< Reserved
+} LTC_REGISTER;
+
+/* DRAM Configuration High Register F2x[1,0]94 */
+#define DRAM_CFG_HI_REG0 0x94
+#define DRAM_CFG_HI_REG1 0x194
+
+/// DRAM Configuration High PCI Register
+typedef struct {
+  UINT32 MemClkFreq:5;               ///< Memory clock frequency
+  UINT32 :2;                         ///< Reserved
+  UINT32 MemClkFreqVal:1;            ///< Memory clock frequency valid
+  UINT32 :2;                         ///< Reserved
+  UINT32 ZqcsInterval:2;             ///< ZQ calibration short interval
+  UINT32 :1;                         ///< Reserved
+  UINT32 DisSimulRdWr:1;             ///< Disable simultaneous read and write
+  UINT32 DisDramInterface:1;         ///< Disable the DRAM interface
+  UINT32 PowerDownEn:1;              ///< Power down mode enable
+  UINT32 PowerDownMode:1;            ///< Power down mode
+  UINT32 FourRankRDimm1:1;           ///< Four rank registered DIMM 1
+  UINT32 FourRankRDimm0:1;           ///< Four rank registered DIMM 0
+  UINT32 DcqArbBypassEn:1;           ///< DRAM controller arbiter bypass enable
+  UINT32 SlowAccessMode:1;           ///< Slow access mode
+  UINT32 FreqChgInProg:1;            ///< Frequency change in progress
+  UINT32 BankSwizzleMode:1;          ///< Bank swizzle mode
+  UINT32 ProcOdtDis:1;               ///< Processor on-die termination disable
+  UINT32 DcqBypassMax:4;             ///< DRAM controller queue bypass maximum
+  UINT32 :4;                         ///< Reserved
+} DRAM_CFG_HI_REGISTER;
+
+
+/* Scrub Rate Control Register F3x58 */
+#define SCRUB_RATE_CTRL_REG 0x58
+
+/// Scrub Rate Control PCI Register
+typedef struct {
+  UINT32 DramScrub:5;                ///< DRAM scrub rate
+  UINT32 :19;                        ///< Reserved
+  UINT32 L3Scrub:5;                  ///< L3 cache scrub rate
+  UINT32 :3;                         ///< Reserved
+} SCRUB_RATE_CTRL_REGISTER;
+
+/* DRAM Scrub Address Low Register F3x5C */
+#define DRAM_SCRUB_ADDR_LOW_REG 0x5C
+
+/// DRAM Scrub Address Low PCI Register
+typedef struct {
+  UINT32 ScrubReDirEn:1;             ///< DRAM scrubber redirect enable
+  UINT32 :5;                         ///< Reserved
+  UINT32 ScrubAddr:26;               ///< DRAM scrubber address bits[31:6]
+} DRAM_SCRUB_ADDR_LOW_REGISTER;
+
+/* Free List Buffer Count Register F3x7C */
+#define FREE_LIST_BUFFER_COUNT_REG 0x7C
+
+/// Free List Buffer Count PCI Register
+typedef struct {
+  UINT32 Xbar2SriFreeListCBC:5;      ///< XBAR to SRI free list command buffer count
+  UINT32 :3;                         ///< Reserved
+  UINT32 Sri2XbarFreeXreqCBC:4;      ///< SRI to XBAR free request and posted request command buffer count
+  UINT32 Sri2XbarFreeRspCBC:4;       ///< SRI to XBAR free response command buffer count
+  UINT32 Sri2XbarFreeXreqDBC:4;      ///< SRI to XBAR free request and posted request data buffer count
+  UINT32 Sri2XbarFreeRspDBC:3;       ///< SRI to XBAR free response data buffer count
+  UINT32 SrqExtFreeListBc:4;         ///< extend SRQ freelist tokens
+  UINT32 :1;                         ///< Reserved
+  UINT32 Xbar2SriFreeListCbInc:3;    ///< XBAR to SRI free list command buffer increment
+  UINT32 :1;                         ///< Reserved
+} FREE_LIST_BUFFER_COUNT_REGISTER;
+
+/* ACPI Power State Control High F3x84 */
+#define ACPI_PWR_STATE_CTRL_HI_REG 0x84
+
+/// ACPI Power State Control High PCI Register
+typedef struct {
+  UINT32 CpuPrbEnSmafAct4:1;        ///< CPU direct probe enable
+  UINT32 NbLowPwrEnSmafAct4:1;      ///< NB low-power enable
+  UINT32 NbGateEnSmafAct4:1;        ///< NB gate enable
+  UINT32 NbCofChgSmafAct4:1;        ///< NB FID change
+  UINT32 :1;                        ///< Reserved
+  UINT32 ClkDivisorSmafAct4:3;      ///< clock divisor
+  UINT32 :8;                        ///< Reserved
+  UINT32 CpuPrbEnSmafAct6:1;        ///< CPU direct probe enable
+  UINT32 NbLowPwrEnSmafAct6:1;      ///< NB low-power enable
+  UINT32 NbGateEnSmafAct6:1;        ///< NB gate enable
+  UINT32 NbCofChgSmafAct6:1;        ///< NB FID change
+  UINT32 :1;                        ///< Reserved
+  UINT32 ClkDivisorSmafAct6:3;      ///< clock divisor
+  UINT32 CpuPrbEnSmafAct7:1;        ///< CPU direct probe enable
+  UINT32 NbLowPwrEnSmafAct7:1;      ///< NB low-power enable
+  UINT32 NbGateEnSmafAct7:1;        ///< NB gate enable
+  UINT32 NbCofChgSmafAct7:1;        ///< NB FID change
+  UINT32 :1;                        ///< Reserved
+  UINT32 ClkDivisorSmafAct7:3;      ///< clock divisor
+} ACPI_PWR_STATE_CTRL_HI_REGISTER;
+
+/* Power Control Miscellaneous Register F3xA0 */
+#define PW_CTL_MISC_REG 0xA0
+
+/// Power Control Miscellaneous PCI Register
+typedef struct {
+  UINT32 PsiVid:7;                   ///< PSI_L VID threshold
+  UINT32 PsiVidEn:1;                 ///< PSI_L VID enable
+  UINT32 :1;                         ///< Reserved
+  UINT32 SviHighFreqSel:1;           ///< SVI high frequency select
+  UINT32 IdleExitEn:1;               ///< IDLEEXIT_L Enable
+  UINT32 PllLockTime:3;              ///< PLL synchronization lock time
+  UINT32 :2;                         ///< Reserved
+  UINT32 ConfigId:12;                ///< Configuration ID
+  UINT32 NbPstateForce:1;            ///< NB P-state force on next LDTSTOP assertion
+  UINT32 :2;                         ///< Reserved
+  UINT32 CofVidProg:1;               ///< COF and VID of Pstate programmed
+} POWER_CTRL_MISC_REGISTER;
+
+
+/* Clock Power/Timing Control 0 Register F3xD4 */
+#define CPTC0_REG 0xD4
+#define CPTC0_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, CPTC0_REG))
+
+/// Clock Power Timing Control PCI Register
+typedef struct {
+  UINT32 NbFid:5;                    ///< NbFid
+  UINT32 NbFidEn:1;                  ///< NbFidEn
+  UINT32 :2;                         ///< Reserved
+  UINT32 ClkRampHystSel:4;           ///< Clock Ramp Hysteresis Select
+  UINT32 ClkRampHystCtl:1;           ///< Clock Ramp Hysteresis Control
+  UINT32 MTC1eEn:1;                  ///< Message Triggered C1e Enable
+  UINT32 CacheFlushImmOnAllHalt:1;   ///< Cache Flush Immediate on All Halt
+  UINT32 StutterScrubEn:1;           ///< Stutter Mode Scrub Enable
+  UINT32 LnkPllLock:2;               ///< Link PLL Lock
+  UINT32 :2;                         ///< Reserved
+  UINT32 PowerStepDown:4;            ///< Power Step Down
+  UINT32 PowerStepUp:4;              ///< Power Step Up
+  UINT32 NbClkDiv:3;                 ///< NbClkDiv
+  UINT32 NbClkDivApplyAll:1;         ///< NbClkDivApplyAll
+} CLK_PWR_TIMING_CTRL_REGISTER;
+
+
+/* Clock Power/Timing Control 1 Register F3xD8 */
+#define CPTC1_REG 0xD8
+#define CPTC1_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, CPTC1_REG))
+
+/// Clock Power Timing Control 1 PCI Register
+typedef struct {
+  UINT32 :4;                         ///< Reserved
+  UINT32 VSRampSlamTime:3;           ///< Voltage stabilization ramp time
+  UINT32 :17;                        ///< Reserved
+  UINT32 ReConDel:4;                 ///< Link reconnect delay
+  UINT32 :4;                         ///< Reserved
+} CLK_PWR_TIMING_CTRL1_REGISTER;
+
+
+/* Northbridge Capabilities Register F3xE8 */
+#define NB_CAPS_REG 0xE8
+
+/// Northbridge Capabilities PCI Register
+typedef struct {
+  UINT32 :1;                         ///< Reserved
+  UINT32 DualNode:1;                 ///< Dual-node multi-processor capable
+  UINT32 EightNode:1;                ///< Eight-node multi-processor capable
+  UINT32 Ecc:1;                      ///< ECC capable
+  UINT32 Chipkill:1;                 ///< Chipkill ECC capable
+  UINT32 :3;                         ///< Reserved
+  UINT32 MctCap:1;                   ///< Memory controller capable
+  UINT32 SvmCapable:1;               ///< SVM capable
+  UINT32 HtcCapable:1;               ///< HTC capable
+  UINT32 LnkRtryCap:1;               ///< Link error-retry capable
+  UINT32 :2;                         ///< Reserved
+  UINT32 MultVidPlane:1;             ///< Multiple VID plane capable
+  UINT32 :1;                         ///< Reserved
+  UINT32 MpCap:3;                    ///< MP capability
+  UINT32 x2Apic:1;                   ///< x2Apic capability
+  UINT32 UnGangEn:4;                 ///< Link unganging enabled
+  UINT32 :1;                         ///< Reserved
+  UINT32 L3Capable:1;                ///< L3 capable
+  UINT32 :3;                         ///< Reserved
+  UINT32 MultiNodeCpu:1;             ///< Multinode processor
+  UINT32 IntNodeNum:2;               ///< Internal node number
+} NB_CAPS_REGISTER;
+
+/* L3 Buffer Count */
+#define L3_BUFFER_COUNT_REG 0x1A0
+
+/// L3 Buffer Count
+typedef struct {
+  UINT32 CpuCmdBufCnt:3;             ///< CPU to SRI command buffer count
+  UINT32 :1;                         ///< Reserved
+  UINT32 L3FreeListCBC:5;            ///< L3 free list command buffer counter for compute unit requests
+  UINT32 :3;                         ///< Reserved
+  UINT32 L3ToSriReqCBC:3;            ///< L3 cache to SRI request command buffer count
+  UINT32 :1;                         ///< Reserved
+  UINT32 CpuToNbFreeBufCnt:2;        ///< Cpu to Nb free buffer count
+  UINT32 :14;                        ///< Reserved
+} L3_BUFFER_COUNT_REGISTER;
+
+/* L3 Control 1 */
+#define L3_CONTROL_1_REG 0x1B8
+
+///  L3 Control 1 Register
+typedef struct {
+  UINT32 :27;                       ///< Reserved
+  UINT32 L3ATMModeEn:1;             ///< Enable Accelerated Transition to Modified protocol in L3
+  UINT32 :4;                        ///< Reserved
+} L3_CONTROL_1_REGISTER;
+
+/* L3 Cache Parameter Register F3x1C4 */
+#define L3_CACHE_PARAM_REG 0x1C4
+
+/// L3 Cache Parameter PCI Register
+typedef struct {
+  UINT32 L3SubcacheSize0:4;          ///< L3 subcache size 0
+  UINT32 L3SubcacheSize1:4;          ///< L3 subcache size 1
+  UINT32 L3SubcacheSize2:4;          ///< L3 subcache size 2
+  UINT32 L3SubcacheSize3:4;          ///< L3 subcache size 3
+  UINT32 :15;                        ///< Reserved
+  UINT32 L3TagInit:1;                ///< L3 tag initialization
+} L3_CACHE_PARAM_REGISTER;
+
+
+/* Probe Filter Control Register F3x1D4 */
+#define PROBE_FILTER_CTRL_REG 0x1D4
+
+/// Probe Filter Control PCI Register
+typedef struct {
+  UINT32 PFMode:2;                   ///< Probe Filter Mode
+  UINT32 PFWayNum:2;                 ///< Probe Filter way number
+  UINT32 PFSubCacheSize0:2;          ///< Probe filter subcache 0 size
+  UINT32 PFSubCacheSize1:2;          ///< Probe filter subcache 1 size
+  UINT32 PFSubCacheSize2:2;          ///< Probe filter subcache 2 size
+  UINT32 PFSubCacheSize3:2;          ///< Probe filter subcache 3 size
+  UINT32 PFSubCacheEn:4;             ///< Probe filter subcache enable
+  UINT32 DisDirectedPrb:1;           ///< Disable directed probes
+  UINT32 PFWayHashEn:1;              ///< Probe filter cache way hash enable
+  UINT32 :1;                         ///< Reserved
+  UINT32 PFInitDone:1;               ///< Probe filter initialization done
+  UINT32 PFPreferredSORepl:2;        ///< PF preferredSO replacement mode
+  UINT32 PFErrInt:2;                 ///< Probe filter error interrupt type
+  UINT32 LvtOffset:4;                ///< Probe filter error interrupt LVT offset
+  UINT32 PFEccError:1;               ///< Probe filter ECC error
+  UINT32 PFLoIndexHashEn:1;          ///< Probe filter low index hash enable
+  UINT32 DisPrbFilterInit:1;         ///< Disable probe filter initialization
+  UINT32 SmallPFDirEn:1;             ///< Small probe filter directory enable
+} PROBE_FILTER_CTRL_REGISTER;
+
+
+/* Product Info Register F3x1FC */
+#define PRCT_INFO_REG 0x1FC
+
+/// Product Information PCI Register
+typedef struct {
+  UINT32 DiDtMode:1;                 ///< DiDtMode
+  UINT32 DiDtCfg0:5;                 ///< DiDtCfg0
+  UINT32 DiDtCfg1:8;                 ///< DiDtCfg1
+  UINT32 AlwaysOnThrottle:2;         ///< AlwaysOnThrottle
+  UINT32 Pipe3ThrottleDis:1;         ///< Pipe3ThrottleDis
+  UINT32 :15;                        ///< Reserved
+} PRODUCT_INFO_REGISTER;
+
+
+/* C-state Control 1 Register D18F4x118 */
+#define CSTATE_CTRL1_REG 0x118
+#define CSTATE_CTRL1_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, CSTATE_CTRL1_REG))
+
+/// C-state Control 1 Register
+typedef struct {
+  UINT32 CpuPrbEnCstAct0:1;          ///< Core direct probe enable
+  UINT32 CacheFlushEnCstAct0:1;      ///< Cache flush enable
+  UINT32 CacheFlushTmrSelCstAct0:2;  ///< Cache flush timer select
+  UINT32 :1;                         ///< Reserved
+  UINT32 ClkDivisorCstAct0:3;        ///< Clock divisor
+  UINT32 PwrGateEnCstAct0:1;         ///< Power gate enable
+  UINT32 :1;                         ///< Reserved
+  UINT32 :6;                         ///< Reserved
+  UINT32 CpuPrbEnCstAct1:1;          ///< Core direct probe enable
+  UINT32 CacheFlushEnCstAct1:1;      ///< Cache flush eable
+  UINT32 CacheFlushTmrSelCstAct1:2;  ///< Cache flush timer select
+  UINT32 :1;                         ///< Reserved
+  UINT32 ClkDivisorCstAct1:3;        ///< Clock divisor
+  UINT32 PwrGateEnCstAct1:1;         ///< Power gate enable
+  UINT32 :1;                         ///< Reserved
+  UINT32 :6;                         ///< Reserved
+} CSTATE_CTRL1_REGISTER;
+
+
+/* C-state Control 2 Register D18F4x11C */
+#define CSTATE_CTRL2_REG 0x11C
+#define CSTATE_CTRL2_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, CSTATE_CTRL2_REG))
+
+/// C-state Control 2 Register
+typedef struct {
+  UINT32 CpuPrbEnCstAct2:1;          ///< Core direct probe enable
+  UINT32 CacheFlushEnCstAct2:1;      ///< Cache flush eable
+  UINT32 CacheFlushTmrSelCstAct2:2;  ///< Cache flush timer select
+  UINT32 AltvidEnCstAct2:1;          ///< Core altvid enable
+  UINT32 ClkDivisorCstAct2:3;        ///< Clock divisor
+  UINT32 PwrGateEnCstAct2:1;         ///< Power gate enable
+  UINT32 PwrOffEnCstAct2:1;          ///< C-state action field 3
+  UINT32 :22;                        ///< Reserved
+} CSTATE_CTRL2_REGISTER;
+
+
+/* Cstate Policy Control 1 Register D18F4x128 */
+#define CSTATE_POLICY_CTRL1_REG 0x128
+#define CSTATE_POLICY_CTRL1_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, CSTATE_POLICY_CTRL1_REG))
+
+/// Cstate Policy Control 1 Register
+typedef struct {
+  UINT32 CoreCStateMode:1;            ///< Specifies C-State actions
+  UINT32 CoreCstatePolicy:1;          ///< Specified processor arbitration of voltage and frequency
+  UINT32 HaltCstateIndex:3;           ///< Specifies the IO-based C-state that is invoked by a HLT instruction
+  UINT32 CacheFlushTmr:7;             ///< Cache flush timer
+  UINT32 CoreStateSaveDestnode:6;     ///< Core state save destination node
+  UINT32 CacheFlushSucMonThreshold:3; ///< Cache flush success monitor threshold
+  UINT32 :10;                         ///< Reserved
+  UINT32 CstateMsgDis:1;              ///< C-state messaging disable
+} CSTATE_POLICY_CTRL1_REGISTER;
+
+
+/* Core Performance Boost Control Register D18F4x15C */
+
+/// Core Performance Boost Control Register
+typedef struct {
+  UINT32 BoostSrc:2;                 ///< Boost source
+  UINT32 NumBoostStates:3;           ///< Number of boosted states
+  UINT32 :2;                         ///< Reserved
+  UINT32 ApmMasterEn:1;              ///< APM master enable
+  UINT32 :20;                        ///< Reserved
+  UINT32 TdpLimitPstate:3;           ///< Highest performance pstate
+  UINT32 BoostLock:1;                ///<
+} CPB_CTRL_REGISTER;
+
+
+/* Northbridge P-state [3:0] F5x1[6C:60]  */
+
+/// Northbridge P-state Register
+typedef struct {
+  UINT32 NbPstateEn:1;               ///< NB P-state enable
+  UINT32 NbFid:5;                    ///< NB frequency ID
+  UINT32 :1;                         ///< Reserved
+  UINT32 NbDid:1;                    ///< NB divisor ID
+  UINT32 :2;                         ///< Reserved
+  UINT32 NbVid:7;                    ///< NB VID
+  UINT32 :15;                        ///< Reserved
+} NB_PSTATE_REGISTER;
+
+
+/* Northbridge P-state Status */
+#define NB_PSTATE_CTRL 0x170
+#define NB_PSTATE_CTRL_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_CTRL))
+
+/// Northbridge P-state Control Register
+typedef struct {
+  UINT32 NbPstateMaxVal:2;           ///< NB P-state maximum value
+  UINT32 :1;                         ///< Reserved
+  UINT32 NbPstateLo:2;               ///< NB P-state low
+  UINT32 :1;                         ///< Reserved
+  UINT32 NbPstateHi:2;               ///< NB P-state high
+  UINT32 :1;                         ///< Reserved
+  UINT32 NbPstateThreshold:3;        ///< NB P-state threshold
+  UINT32 :1;                         ///< Reserved
+  UINT32 NbPstateDisOnP0:1;          ///< NB P-state disable on P0
+  UINT32 SwNbPstateLoDis:1;          ///< Software NB P-state low disable
+  UINT32 :17;                        ///< Reserved
+} NB_PSTATE_CTRL_REGISTER;
+
+
+/* Northbridge P-state Status */
+#define NB_PSTATE_STATUS 0x174
+#define NB_PSTATE_STATUS_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_STATUS))
+
+/// Northbridge P-state Status Register
+typedef struct {
+  UINT32 NbPstateDis:1;              ///< Nb pstate disable
+  UINT32 StartupNbPstate:2;          ///< startup northbridge Pstate number
+  UINT32 CurNbFid:5;                 ///< Current NB FID
+  UINT32 :1;                         ///< Reserved
+  UINT32 CurNbDid:1;                 ///< Current NB DID
+  UINT32 :2;                         ///< Reserved
+  UINT32 CurNbVid:7;                 ///< Current NB VID
+  UINT32 CurNbPstate:2;              ///< Current NB Pstate
+  UINT32 :11;                        ///< Reserved
+} NB_PSTATE_STS_REGISTER;
+
+#endif /* _CPU_F15_OR_POWERMGMT_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrPstate.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrPstate.c
new file mode 100644
index 0000000000..4a2251a4e4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrPstate.c
@@ -0,0 +1,920 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi Pstate feature support functions.
+ *
+ * Provides the functions necessary to initialize the Pstate feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuPstateTables.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFamRegisters.h"
+#include "cpuF15Utilities.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_CPUF15ORPSTATE_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F15OrGetPowerStepValueInTime (
+  IN OUT   UINT32  *PowerStepPtr
+  );
+
+VOID
+STATIC
+F15OrGetPllValueInTime (
+  IN OUT   UINT32  *PllLockTimePtr
+  );
+
+AGESA_STATUS
+STATIC
+F15OrGetFrequencyXlatRegInfo (
+  IN       PSTATE_CPU_FAMILY_SERVICES  *PstateCpuServices,
+  IN       UINT8                  PStateNumber,
+  IN       UINT32                 Frequency,
+     OUT   UINT32                 *CpuFidPtr,
+     OUT   UINT32                 *CpuDidPtr1,
+     OUT   UINT32                 *CpuDidPtr2,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+AGESA_STATUS
+F15OrGetPstateTransLatency (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       PSTATE_LEVELING        *PStateLevelingBufferStructPtr,
+  IN       PCI_ADDR               *PciAddress,
+     OUT   UINT32                 *TransitionLatency,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+AGESA_STATUS
+F15OrGetPstateFrequency (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+F15OrPstateLevelingCoreMsrModify (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       S_CPU_AMD_PSTATE   *CpuAmdPState,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+AGESA_STATUS
+F15OrGetPstatePower (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *PowerInMw,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+F15OrGetPstateMaxState (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+     OUT   UINT32              *MaxPStateNumber,
+     OUT   UINT8               *NumberOfBoostStates,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+AGESA_STATUS
+F15OrGetPstateRegisterInfo (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT32              PState,
+     OUT   BOOLEAN             *PStateEnabled,
+  IN OUT   UINT32              *IddVal,
+  IN OUT   UINT32              *IddDiv,
+     OUT   UINT32              *SwPstateNumber,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if PSD need to be generated.
+ *
+ * @param[in]     PstateCpuServices  Pstate CPU services.
+ * @param[in,out] PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]     StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               PSD need to be generated
+ * @retval       FALSE              PSD does NOT need to be generated
+ *
+ */
+BOOLEAN
+STATIC
+F15OrIsPstatePsdNeeded (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN OUT   PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32             LocalPciRegister;
+  PCI_ADDR           PciAddress;
+  PLATFORM_FEATS     Features;
+
+  // Initialize the union
+  Features.PlatformValue = 0;
+  GetPlatformFeatures (&Features, PlatformConfig, StdHeader);
+
+  //
+  // For Single link processor, PSD needs to be generated
+  // For other processor, if D18F5x80[DualCore][0]=0, the _PSD object does not need to be generated.
+  //
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+  PciAddress.Address.Register = COMPUTE_UNIT_STATUS;
+  PciAddress.Address.Function = FUNC_5;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  if ((!Features.PlatformFeatures.PlatformSingleLink) && ((LocalPciRegister & 0x10000) == 0)) {
+    return FALSE;
+  }
+  return TRUE;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if Pstate PSD is dependent.
+ *
+ * @param[in]     PstateCpuServices  Pstate CPU services.
+ * @param[in,out] PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]     StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               PSD is dependent.
+ * @retval       FALSE              PSD is independent.
+ *
+ */
+BOOLEAN
+STATIC
+F15OrIsPstatePsdDependent (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN OUT   PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  PLATFORM_FEATS         Features;
+
+  // Initialize the union
+  Features.PlatformValue = 0;
+  GetPlatformFeatures (&Features, PlatformConfig, StdHeader);
+
+  //
+  // For Single link has PSD option, default is dependent.
+  // If multi-link, always return independent.
+  //
+  if (Features.PlatformFeatures.PlatformSingleLink) {
+    if (PlatformConfig->ForcePstateIndependent) {
+      return FALSE;
+    }
+    return TRUE;
+  }
+  return FALSE;
+}
+
+/**
+ *  Family specific call to set core TscFreqSel.
+ *
+ * @param[in]     PstateCpuServices  Pstate CPU services.
+ * @param[in]     StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F15OrSetTscFreqSel (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  //TscFreqSel: TSC frequency select. Read-only. Reset: 1. 1=The TSC increments at the P0 frequency.
+  //This field uses software P-state numbering.
+  return;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to get Pstate Transition Latency.
+ *
+ *  Calculate TransitionLatency by power step value and pll value.
+ *
+ *  @param[in]     PstateCpuServices                 Pstate CPU services.
+ *  @param[in]     PStateLevelingBufferStructPtr     Pstate row data buffer pointer
+ *  @param[in]     PciAddress                        Pci address
+ *  @param[out]    TransitionLatency                 The transition latency.
+ *  @param[in]     StdHeader                         Header for library and services
+ *
+ *  @retval      AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F15OrGetPstateTransLatency (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       PSTATE_LEVELING        *PStateLevelingBufferStructPtr,
+  IN       PCI_ADDR               *PciAddress,
+     OUT   UINT32                 *TransitionLatency,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32               TempVar_b;
+  UINT32               TempVar_c;
+  UINT32               TempVar_d;
+  UINT32               TempVar8_a;
+  UINT32               TempVar8_b;
+  UINT32               Ignored;
+  UINT32               k;
+  UINT32               CpuFidSameFlag;
+  UINT8                PStateMaxValueOnCurrentCore;
+  UINT32               TransAndBusMastLatency;
+
+  CpuFidSameFlag = 1;
+
+  F15OrGetFrequencyXlatRegInfo (
+    PstateCpuServices,
+    0,
+    PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateStruct[0].CoreFreq,
+    &TempVar_b,
+    &TempVar_c,
+    &Ignored,
+    StdHeader
+    );
+
+  TempVar_d = TempVar_b;
+  PStateMaxValueOnCurrentCore = PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateMaxValue;
+
+  //
+  //Check if MSRC001_00[6B:64][CpuFid] is the same value for all P-states where
+  //MSRC001_00[6B:64][PstateEn]=1
+  //
+  for (k = 1; k <= PStateMaxValueOnCurrentCore; k++) {
+    if (PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateStruct[k].PStateEnable != 0) {
+      F15OrGetFrequencyXlatRegInfo (
+        PstateCpuServices,
+        (UINT8) k,
+        PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateStruct[k].CoreFreq,
+        &TempVar_b,
+        &TempVar_c,
+        &Ignored,
+        StdHeader
+        );
+    }
+
+    if (TempVar_d != TempVar_b) {
+      CpuFidSameFlag = 0;
+      break;
+    }
+  }
+
+  PciAddress->Address.Register = 0xD4;
+  PciAddress->Address.Function = FUNC_3;
+  LibAmdPciRead (AccessWidth32, *PciAddress, &TempVar_d, StdHeader);
+
+  // PowerStepDown - Bits 20:23
+  TempVar8_a = (TempVar_d & 0x00F00000) >> 20;
+
+  // PowerStepUp   - Bits 24:27
+  TempVar8_b = (TempVar_d & 0x0F000000) >> 24;
+
+  // Convert the raw numbers in TempVar8_a and TempVar8_b into time
+  F15OrGetPowerStepValueInTime (&TempVar8_a);
+  F15OrGetPowerStepValueInTime (&TempVar8_b);
+
+  //
+  //(12 * (F3xD4[PowerStepDown] + F3xD4[PowerStepUp]) /1000) us
+  //
+  TransAndBusMastLatency =
+  (12 * (TempVar8_a + TempVar8_b) + 999) / 1000;
+
+  if (CpuFidSameFlag == 0) {
+    //
+    //+ F3xA0[PllLockTime]
+    //
+    PciAddress->Address.Register = 0xA0;
+    LibAmdPciRead (AccessWidth32, *PciAddress, &TempVar_d, StdHeader);
+
+    TempVar8_a = (0x00003800 & TempVar_d) >> 11;
+    F15OrGetPllValueInTime (&TempVar8_a);
+    TransAndBusMastLatency += TempVar8_a;
+  }
+
+  *TransitionLatency = TransAndBusMastLatency;
+
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to calculates the frequency in megahertz of the desired P-state.
+ *
+ *  @param[in]   PstateCpuServices        Pstate CPU services.
+ *  @param[in]   StateNumber              The hardware P-State to analyze.
+ *  @param[out]  FrequencyInMHz           The P-State's frequency in MegaHertz
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      AGESA_SUCCESS   Always Succeeds.
+ */
+AGESA_STATUS
+F15OrGetPstateFrequency (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 TempValue;
+  UINT32 CpuDid;
+  UINT32 CpuFid;
+  UINT64 LocalMsrRegister;
+
+  ASSERT (StateNumber < NM_PS_REG);
+  LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+  ASSERT (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1);
+  CpuDid = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->CpuDid);
+  CpuFid = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->CpuFid);
+
+  switch (CpuDid) {
+  case 0:
+    TempValue = 1;
+    break;
+  case 1:
+    TempValue = 2;
+    break;
+  case 2:
+    TempValue = 4;
+    break;
+  case 3:
+    TempValue = 8;
+    break;
+  case 4:
+    TempValue  =  16;
+    break;
+  default:
+    // CpuDid is set to an undefined value.  This is due to either a misfused CPU, or
+    // an invalid P-state MSR write.
+    ASSERT (FALSE);
+    TempValue = 1;
+    break;
+  }
+  *FrequencyInMHz = (100 * (CpuFid + 0x10) / TempValue);
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to sets the Pstate MSR to each APs base on Pstate Buffer.
+ *
+ *  @param[in]      PstateCpuServices        Pstate CPU services.
+ * @param[in]       CpuAmdPState             Gathered P-state data structure for whole system.
+ * @param[in]       StdHeader                Config for library and services.
+ *
+ * @retval          AGESA_STATUS    AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+F15OrPstateLevelingCoreMsrModify (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       S_CPU_AMD_PSTATE   *CpuAmdPState,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32             i;
+  UINT32             Ignored;
+  UINT32             k;
+  UINT32             TempVar_d;
+  UINT32             TempVar_e;
+  UINT32             TempVar_f;
+  UINT32             LogicalSocketCount;
+  UINT32             LocalPciRegister;
+  UINT32             Socket;
+  UINT32             Module;
+  UINT32             Core;
+  UINT8              SwP0;
+  UINT64             MsrValue;
+  AGESA_STATUS       Status;
+  PSTATE_LEVELING    *PStateBufferPtr;
+  PSTATE_LEVELING    *PStateBufferPtrTmp;
+  S_CPU_AMD_PSTATE   *CpuAmdPstatePtr;
+  PCI_ADDR           PciAddress;
+  CPU_SPECIFIC_SERVICES   *FamilySpecificServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  ASSERT (FamilySpecificServices != NULL);
+
+  Ignored = 0;
+  CpuAmdPstatePtr = (S_CPU_AMD_PSTATE *) CpuAmdPState;
+  PStateBufferPtrTmp = CpuAmdPstatePtr->PStateLevelingStruc;
+  PStateBufferPtr = CpuAmdPstatePtr->PStateLevelingStruc;
+  LogicalSocketCount = CpuAmdPstatePtr->TotalSocketInSystem;
+  PciAddress.AddressValue = 0;
+  SwP0 = PStateBufferPtrTmp->PStateCoreStruct[0].NumberOfBoostedStates;
+
+  //
+  //Try to find the Pstate buffer specific to this core(socket).
+  //
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &Status);
+  GetPciAddress (StdHeader, Socket, Module, &PciAddress, &Status);
+  for (i = 0; i < LogicalSocketCount; i++) {
+    CpuGetPStateLevelStructure (&PStateBufferPtrTmp, CpuAmdPstatePtr, i, StdHeader);
+    if (PStateBufferPtrTmp->SocketNumber == Socket) {
+      break;
+    }
+  }
+
+  if (PStateBufferPtr[0].OnlyOneEnabledPState) {
+    //
+    //If all processors have only 1 enabled P-state, the following sequence should be performed on all cores:
+    //
+
+    //1. Write the appropriate CpuFid value resulting from the matched CPU COF to 'software P0'.
+    LibAmdMsrRead (MSR_PSTATE_0 + (UINT32) SwP0, &MsrValue, StdHeader);
+    Status = F15OrGetFrequencyXlatRegInfo (PstateCpuServices, SwP0, PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[0].CoreFreq, &TempVar_d, &TempVar_e, &Ignored, StdHeader);
+    // Bits 5:0
+    ((PSTATE_MSR *) &MsrValue)->CpuFid = TempVar_d;
+    // Bits 8:6
+    ((PSTATE_MSR *) &MsrValue)->CpuDid = TempVar_e;
+    // Bits 39:32
+    ((PSTATE_MSR *) &MsrValue)->IddValue = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[0].IddValue;
+    // Bits 41:40
+    ((PSTATE_MSR *) &MsrValue)->IddDiv = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[0].IddDiv;
+    // Enable the P-State
+    ((PSTATE_MSR *) &MsrValue)->PsEnable = 1;
+    LibAmdMsrWrite (MSR_PSTATE_0 + (UINT32) SwP0, &MsrValue, StdHeader);
+
+    //2. Copy P0 to P1
+    LibAmdMsrWrite (MSR_PSTATE_1 + (UINT32) SwP0, &MsrValue, StdHeader);
+
+    //3. Increment F3xDC[PstatemaxVal] by 1.
+    PciAddress.Address.Register = CPTC2_REG;
+    PciAddress.Address.Function = FUNC_3;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal++;
+    LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+    //4. Write 001b to MSRC001_0062[PstateCmd].
+    FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) 1, (BOOLEAN) FALSE, StdHeader);
+
+    //5. Wait for MSRC001_0071[CurCpuFid] = P1[CpuFid].
+    do {
+      LibAmdMsrRead (MSR_COFVID_STS, &MsrValue, StdHeader);
+    } while (((COFVID_STS_MSR *) &MsrValue)->CurCpuFid != TempVar_d);
+
+    //6. Write 000b to MSRC001_0062[PstateCmd].
+    FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) 0, (BOOLEAN) FALSE, StdHeader);
+
+    //7. Wait for MSRC001_0071[CurPstate] = MSRC001_0071[CurPstateLimit].
+    do {
+      LibAmdMsrRead (MSR_COFVID_STS, &MsrValue, StdHeader);
+    } while (((COFVID_STS_MSR *) &MsrValue)->CurPstate != ((COFVID_STS_MSR *) &MsrValue)->CurPstateLimit);
+
+    //8. Write 0b to P1[PstateEn].
+    LibAmdMsrRead (MSR_PSTATE_1 + (UINT32) SwP0, &MsrValue, StdHeader);
+    ((PSTATE_MSR *) &MsrValue)->PsEnable = 0;
+    LibAmdMsrWrite (MSR_PSTATE_1 + (UINT32) SwP0, &MsrValue, StdHeader);
+
+    //9. Decrement F3xDC[PstateMaxVal] by 1 and exit the sequence (no further steps are required).
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal--;
+    LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+  } else {
+
+    TempVar_f = MSR_PSTATE_0 + (UINT32) SwP0;
+
+    for (k = SwP0; k <= PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue; k++, TempVar_f++) {
+      // If pState is not disabled then do update
+      LibAmdMsrRead (TempVar_f, &MsrValue, StdHeader);
+
+      if (PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].PStateEnable == 1) {
+        Status = F15OrGetFrequencyXlatRegInfo (PstateCpuServices, (UINT8) k, PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].CoreFreq, &TempVar_d, &TempVar_e, &Ignored, StdHeader);
+        if (Status != AGESA_ERROR) {
+          // Bits 5:0
+          ((PSTATE_MSR *) &MsrValue)->CpuFid = TempVar_d;
+          // Bits 8:6
+          ((PSTATE_MSR *) &MsrValue)->CpuDid = TempVar_e;
+        }
+
+        // Bits 39:32
+        ((PSTATE_MSR *) &MsrValue)->IddValue = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].IddValue;
+        // Bits 41:40
+        ((PSTATE_MSR *) &MsrValue)->IddDiv = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].IddDiv;
+        // Enable the P-State
+        ((PSTATE_MSR *) &MsrValue)->PsEnable = 1;
+        LibAmdMsrWrite (TempVar_f, &MsrValue, StdHeader);
+      } else {
+        // Disable the P-State
+        ((PSTATE_MSR *) &MsrValue)->PsEnable = 0;
+        LibAmdMsrWrite (TempVar_f, &MsrValue, StdHeader);
+      }
+    }
+  }
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to calculates the power in milliWatts of the desired P-state.
+ *
+ *  @param[in]     PstateCpuServices      Pstate CPU services.
+ *  @param[in]   StateNumber              Which P-state to analyze
+ *  @param[out]  PowerInMw                The Power in milliWatts of that P-State
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F15OrGetPstatePower (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *PowerInMw,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32  CpuVid;
+  UINT32  IddValue;
+  UINT32  IddDiv;
+  UINT32  V_x10000;
+  UINT32  Power;
+  UINT64  LocalMsrRegister;
+
+  ASSERT (StateNumber < NM_PS_REG);
+  LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+  ASSERT (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1);
+  CpuVid = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->CpuVid);
+  IddValue = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->IddValue);
+  IddDiv = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->IddDiv);
+
+  if (CpuVid >= 0x7C) {
+    V_x10000 = 0;
+  } else {
+    V_x10000 = 15500L - (125L * CpuVid);
+  }
+
+  Power = V_x10000 * IddValue;
+
+  switch (IddDiv) {
+  case 0:
+    *PowerInMw = Power / 10L;
+    break;
+  case 1:
+    *PowerInMw = Power / 100L;
+    break;
+  case 2:
+    *PowerInMw = Power / 1000L;
+    break;
+  default:
+    // IddDiv is set to an undefined value.  This is due to either a misfused CPU, or
+    // an invalid P-state MSR write.
+    ASSERT (FALSE);
+    *PowerInMw = 0;
+    break;
+  }
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to get CPU pstate max state.
+ *
+ *  @param[in]     PstateCpuServices      Pstate CPU services.
+ *  @param[out]    MaxPStateNumber        The max hw pstate value on the current socket.
+ *  @param[out]    NumberOfBoostStates    The number of boosted P-states on the current socket.
+ *  @param[in]     StdHeader              Handle of Header for calling lib functions and services.
+ *
+ *  @retval      AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F15OrGetPstateMaxState (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+     OUT   UINT32              *MaxPStateNumber,
+     OUT   UINT8               *NumberOfBoostStates,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT32               NumBoostStates;
+  UINT64               MsrValue;
+  UINT32               LocalPciRegister;
+  PCI_ADDR             PciAddress;
+
+  LocalPciRegister = 0;
+
+  // For F15 Orochi CPU, skip boosted p-state. The boosted p-state number = D[1F:18]F4x15C[NumBoostStates].
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+  PciAddress.Address.Register = CPB_CTRL_REG;
+  PciAddress.Address.Function = FUNC_4;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F4x15C
+
+  NumBoostStates = ((CPB_CTRL_REGISTER *) &LocalPciRegister)->NumBoostStates;
+  *NumberOfBoostStates = (UINT8) NumBoostStates;
+
+  //
+  // Read PstateMaxVal [6:4] from MSR C001_0061
+  // So, we will know the max pstate state in this socket.
+  //
+  LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &MsrValue, StdHeader);
+  *MaxPStateNumber = (UINT32) (((PSTATE_CURLIM_MSR *) &MsrValue)->PstateMaxVal) + NumBoostStates;
+
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to get CPU pstate register information.
+ *
+ *  @param[in]     PstateCpuServices         Pstate CPU services.
+ *  @param[in]     PState                    Input Pstate number for query.
+ *  @param[out]    PStateEnabled             Boolean flag return pstate enable.
+ *  @param[in,out] IddVal                    Pstate current value.
+ *  @param[in,out] IddDiv                    Pstate current divisor.
+ *  @param[out]    SwPstateNumber            Software P-state number.
+ *  @param[in]     StdHeader                 Handle of Header for calling lib functions and services.
+ *
+ *  @retval      AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F15OrGetPstateRegisterInfo (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT32              PState,
+     OUT   BOOLEAN             *PStateEnabled,
+  IN OUT   UINT32              *IddVal,
+  IN OUT   UINT32              *IddDiv,
+     OUT   UINT32              *SwPstateNumber,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT32    LocalPciRegister;
+  UINT64    LocalMsrRegister;
+  PCI_ADDR  PciAddress;
+
+  ASSERT (PState < NM_PS_REG);
+
+  // For F15 Orochi CPU, skip boosted p-state. The boosted p-state number = D[1F:18]F4x15C[NumBoostStates].
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+  PciAddress.Address.Register = CPB_CTRL_REG;
+  PciAddress.Address.Function = FUNC_4;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F4x15C
+
+  // Read PSTATE MSRs
+  LibAmdMsrRead (PS_REG_BASE + (UINT32) PState, &LocalMsrRegister, StdHeader);
+
+  *SwPstateNumber = PState;
+
+  if (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1) {
+    // PState enable = bit 63
+    *PStateEnabled = TRUE;
+    //
+    // Check input pstate belongs to Boosted-Pstate, if yes, return *PStateEnabled = FALSE.
+    //
+    if (PState < ((CPB_CTRL_REGISTER *) &LocalPciRegister)->NumBoostStates) {
+      *PStateEnabled = FALSE;
+    } else {
+      *SwPstateNumber = PState - ((CPB_CTRL_REGISTER *) &LocalPciRegister)->NumBoostStates;
+    }
+  } else {
+    *PStateEnabled = FALSE;
+  }
+
+  // Bits 39:32 (high 32 bits [7:0])
+  *IddVal = (UINT32) ((PSTATE_MSR *) &LocalMsrRegister)->IddValue;
+  // Bits 41:40 (high 32 bits [9:8])
+  *IddDiv = (UINT32) ((PSTATE_MSR *) &LocalMsrRegister)->IddDiv;
+
+  return (AGESA_SUCCESS);
+}
+
+
+CONST PSTATE_CPU_FAMILY_SERVICES ROMDATA F15OrPstateServices =
+{
+  0,
+  F15OrIsPstatePsdNeeded,
+  F15OrIsPstatePsdDependent,
+  F15OrSetTscFreqSel,
+  F15OrGetPstateTransLatency,
+  F15OrGetPstateFrequency,
+  F15OrPstateLevelingCoreMsrModify,
+  F15OrGetPstatePower,
+  F15OrGetPstateMaxState,
+  F15OrGetPstateRegisterInfo
+};
+
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  F15OrGetPowerStepValueInTime
+ *
+ *  Description:
+ *    Convert power step value in time
+ *
+ *  Parameters:
+ *    @param[out]     *PowerStepPtr
+ *
+ *    @retval       VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+STATIC
+F15OrGetPowerStepValueInTime (
+  IN OUT   UINT32  *PowerStepPtr
+  )
+{
+  UINT32 TempVar_a;
+
+  TempVar_a = *PowerStepPtr;
+
+  if (TempVar_a < 0x4) {
+    *PowerStepPtr = 400 - (TempVar_a * 100);
+  } else if (TempVar_a <  0x9) {
+    *PowerStepPtr = 130 - (TempVar_a * 10);
+  } else {
+    *PowerStepPtr = 90 - (TempVar_a * 5);
+  }
+}
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  F15OrGetPllValueInTime
+ *
+ *  Description:
+ *    Convert PLL Value in time
+ *
+ *  Parameters:
+ *    @param[out]     *PllLockTimePtr
+ *
+ *    @retval       VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+STATIC
+F15OrGetPllValueInTime (
+  IN OUT   UINT32  *PllLockTimePtr
+  )
+{
+  if (*PllLockTimePtr < 4) {
+    *PllLockTimePtr = *PllLockTimePtr + 1;
+  } else if (*PllLockTimePtr == 4) {
+    *PllLockTimePtr = 8;
+  } else if (*PllLockTimePtr == 5) {
+    *PllLockTimePtr = 16;
+  } else
+    *PllLockTimePtr = 0;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *    This function will return the CpuFid and CpuDid in MHz, using the formula
+ *    described in the BKDG MSRC001_00[68:64] P-State [4:0] Registers:bit 8:0
+ *
+ *    @param[in]       PstateCpuServices        The current Family Specific Services.
+ *    @param[in]       PStateNumber             P-state number to check.
+ *    @param[in]       Frequency                Leveled target frequency for PStateNumber.
+ *    @param[out]      *CpuFidPtr               New leveled FID.
+ *    @param[out]      *CpuDidPtr1              New leveled DID info 1.
+ *    @param[out]      *CpuDidPtr2              New leveled DID info 2.
+ *    @param[in]       *StdHeader               Header for library and services.
+ *
+ *    @retval       AGESA_WARNING           This P-State does not need to be modified.
+ *    @retval       AGESA_SUCCESS           This P-State must be modified to be level.
+ */
+AGESA_STATUS
+STATIC
+F15OrGetFrequencyXlatRegInfo (
+  IN       PSTATE_CPU_FAMILY_SERVICES  *PstateCpuServices,
+  IN       UINT8                  PStateNumber,
+  IN       UINT32                 Frequency,
+     OUT   UINT32                 *CpuFidPtr,
+     OUT   UINT32                 *CpuDidPtr1,
+     OUT   UINT32                 *CpuDidPtr2,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32 i;
+  UINT32 j;
+  AGESA_STATUS Status;
+  UINT32 FrequencyInMHz;
+
+  FrequencyInMHz = 0;
+  *CpuDidPtr2 = 0xFFFF;
+
+  Status = AGESA_SUCCESS;
+
+  PstateCpuServices->GetPstateFrequency (PstateCpuServices, PStateNumber, &FrequencyInMHz, StdHeader);
+  if (FrequencyInMHz == Frequency) {
+    Status |= AGESA_WARNING;
+  }
+
+  // CPU Frequency = 100 MHz * (CpuFid + 10h) / (2^CpuDid)
+  // In this for loop i = 2^CpuDid
+
+
+  for (i = 1; i < 17; (i += i)) {
+    for (j = 0; j < 64; j++) {
+      if (Frequency == ((100 * (j + 0x10)) / i )) {
+        *CpuFidPtr = j;
+        if (i == 1) {
+          *CpuDidPtr1 = 0;
+        } else if (i == 2) {
+          *CpuDidPtr1 = 1;
+        } else if (i == 4) {
+          *CpuDidPtr1 = 2;
+        } else if (i == 8) {
+          *CpuDidPtr1 = 3;
+        } else if (i == 16) {
+          *CpuDidPtr1 = 4;
+        } else {
+          *CpuFidPtr = 0xFFFF;
+          *CpuDidPtr1 = 0xFFFF;
+        }
+        // Success
+        return Status;
+      }
+    }
+  }
+
+  // Error Condition
+  *CpuFidPtr = 0x00FF;
+  *CpuDidPtr1 = 0x00FF;
+  *CpuDidPtr2 = 0x00FF;
+
+  return AGESA_ERROR;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrSoftwareThermal.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrSoftwareThermal.c
new file mode 100644
index 0000000000..cd0dc48249
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrSoftwareThermal.c
@@ -0,0 +1,128 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi thermal initialization
+ *
+ * Performs processor thermal initialization.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuF15OrPowerMgmt.h"
+#include "OptionFamily15hEarlySample.h"
+#include "OptionMultiSocket.h"
+#include "cpuF15OrSoftwareThermal.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_OR_CPUF15ORSOFTWARETHERMAL_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern F15_OR_ES_CORE_SUPPORT F15OrEarlySampleCoreSupport;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *    Main entry point for initializing the Thermal Control
+ *    safety net feature.
+ *
+ *    This must be run by all Family 15h Orochi core 0s in the system.
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParamsPtr       Service parameters.
+ * @param[in]  StdHeader               Config handle for library and services.
+ */
+VOID
+F15OrPmThermalInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT32    Core;
+  UINT32    LocalPciRegister;
+  PCI_ADDR  PciAddress;
+
+  if (OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader)) {
+    GetCurrentCore (&Core, StdHeader);
+    ASSERT (Core == 0);
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = NB_CAPS_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if (((NB_CAPS_REGISTER *) &LocalPciRegister)->HtcCapable == 1) {
+      // Enable HTC
+      PciAddress.Address.Register = HTC_REG;
+      LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      ((HTC_REGISTER *) &LocalPciRegister)->HtcSlewSel = 0;
+      ((HTC_REGISTER *) &LocalPciRegister)->HtcEn = 1;
+      F15OrEarlySampleCoreSupport.F15OrHtcInitHook (&LocalPciRegister, StdHeader);
+      IDS_OPTION_HOOK (IDS_HTC_CTRL, &LocalPciRegister, StdHeader);
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrSoftwareThermal.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrSoftwareThermal.h
new file mode 100644
index 0000000000..130c73df1d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/OR/cpuF15OrSoftwareThermal.h
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Orochi thermal initialization related functions and structures
+ *
+ * Performs processor thermal initialization.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15/OR
+ * @e \$Revision: 45341 $   @e \$Date: 2011-01-14 15:49:18 -0700 (Fri, 14 Jan 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F15_OR_SOFTWARE_THERMAL_H_
+#define _CPU_F15_OR_SOFTWARE_THERMAL_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F15OrPmThermalInit (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F15_OR_SOFTWARE_THERMAL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuCommonF15Utilities.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuCommonF15Utilities.c
new file mode 100644
index 0000000000..fcd149b5ee
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuCommonF15Utilities.c
@@ -0,0 +1,181 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 15h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 44737 $   @e \$Date: 2011-01-05 00:59:55 -0700 (Wed, 05 Jan 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuCommonF15Utilities.h"
+#include "cpuF15PowerMgmt.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_CPUCOMMONF15UTILITIES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Set warm reset status and count
+ *
+ *  @CpuServiceMethod{::F_CPU_SET_WARM_RESET_FLAG}.
+ *
+ *  This function will use bit9, and bit 10 of register F0x6C as a warm reset status and count.
+ *
+ *  @param[in]  FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]  StdHeader                Handle of Header for calling lib functions and services.
+ *  @param[in]  Request                  Indicate warm reset status
+ *
+ */
+VOID
+F15SetAgesaWarmResetFlag (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       WARM_RESET_REQUEST *Request
+  )
+{
+  PCI_ADDR  PciAddress;
+  UINT32    PciData;
+
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_0, HT_INIT_CTRL);
+  LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+  // bit[5] - indicate a warm reset is or is not required
+  PciData &= ~(HT_INIT_BIOS_RST_DET_0);
+  PciData = PciData | (Request->RequestBit << 5);
+
+  // bit[10,9] - indicate warm reset status and count
+  PciData &= ~(HT_INIT_BIOS_RST_DET_1 | HT_INIT_BIOS_RST_DET_2);
+  PciData |= Request->StateBits << 9;
+
+  LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Get warm reset status and count
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_WARM_RESET_FLAG}.
+ *
+ *  This function will bit9, and bit 10 of register F0x6C as a warm reset status and count.
+ *
+ *  @param[in]  FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]  StdHeader                Config handle for library and services
+ *  @param[out] Request                  Indicate warm reset status
+ *
+ */
+VOID
+F15GetAgesaWarmResetFlag (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+     OUT   WARM_RESET_REQUEST *Request
+  )
+{
+  PCI_ADDR  PciAddress;
+  UINT32    PciData;
+
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_0, HT_INIT_CTRL);
+  LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+  // bit[5] - indicate a warm reset is or is not required
+  Request->RequestBit = (UINT8) ((PciData & HT_INIT_BIOS_RST_DET_0) >> 5);
+  // bit[10,9] - indicate warm reset status and count
+  Request->StateBits = (UINT8) ((PciData & (HT_INIT_BIOS_RST_DET_1 | HT_INIT_BIOS_RST_DET_2)) >> 9);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Return a number zero or one, based on the Core ID position in the initial APIC Id.
+ *
+ * @CpuServiceMethod{::F_CORE_ID_POSITION_IN_INITIAL_APIC_ID}.
+ *
+ * @param[in]     FamilySpecificServices  The current Family Specific Services.
+ * @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ * @retval        CoreIdPositionZero      Core Id is not low
+ * @retval        CoreIdPositionOne       Core Id is low
+ */
+CORE_ID_POSITION
+F15CpuAmdCoreIdPositionInInitialApicId (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT64 InitApicIdCpuIdLo;
+
+  //  Check bit_54 [InitApicIdCpuIdLo] to find core id position.
+  LibAmdMsrRead (MSR_NB_CFG, &InitApicIdCpuIdLo, StdHeader);
+  InitApicIdCpuIdLo = ((InitApicIdCpuIdLo & BIT54) >> 54);
+  return ((InitApicIdCpuIdLo == 0) ? CoreIdPositionZero : CoreIdPositionOne);
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuCommonF15Utilities.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuCommonF15Utilities.h
new file mode 100644
index 0000000000..ffa5584864
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuCommonF15Utilities.h
@@ -0,0 +1,92 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 15h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 44737 $   @e \$Date: 2011-01-05 00:59:55 -0700 (Wed, 05 Jan 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_COMMON_F15_UTILITES_H_
+#define _CPU_COMMON_F15_UTILITES_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+CORE_ID_POSITION
+F15CpuAmdCoreIdPositionInInitialApicId (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+F15SetAgesaWarmResetFlag (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       WARM_RESET_REQUEST *Request
+  );
+
+VOID
+F15GetAgesaWarmResetFlag (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+     OUT   WARM_RESET_REQUEST *Request
+  );
+
+#endif  // _CPU_COMMON_F15_UTILITES_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Apm.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Apm.c
new file mode 100644
index 0000000000..b47960e106
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Apm.c
@@ -0,0 +1,126 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 APM Initialization
+ *
+ * Enables Application Power Management feature
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 55374 $   @e \$Date: 2011-06-20 17:29:27 -0600 (Mon, 20 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF15PowerMgmt.h"
+#include "CommonReturns.h"
+#include "cpuApm.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_CPUF15APM_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Entry point for enabling Application Power Management
+ *
+ * This function must be run after all P-State routines have been executed
+ *
+ * @param[in]  ApmServices             The current CPU's family services.
+ * @param[in]  PlatformConfig          Contains the runtime modifiable feature input data.
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ * @retval     AGESA_SUCCESS           Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F15InitializeApm (
+  IN       APM_FAMILY_SERVICES    *ApmServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32   LocalPciRegister;
+  PCI_ADDR PciAddress;
+
+  PciAddress.Address.Function = FUNC_4;
+  PciAddress.Address.Register = CPB_CTRL_REG;
+  LocalPciRegister = 0;
+  ((F15_CPB_CTRL_REGISTER *) (&LocalPciRegister))->ApmMasterEn = 1;
+  OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, 0xFFFFFFFF, LocalPciRegister, StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+
+
+CONST APM_FAMILY_SERVICES ROMDATA F15ApmSupport =
+{
+  0,
+  (PF_APM_IS_SUPPORTED) CommonReturnTrue,
+  F15InitializeApm
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15BrandId.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15BrandId.c
new file mode 100644
index 0000000000..528d4ba0a4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15BrandId.c
@@ -0,0 +1,223 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BrandId related functions and structures.
+ *
+ * Contains code that provides CPU BrandId information
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuEarlyInit.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_CPUF15BRANDID_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define NAME_STRING_ADDRESS_PORT 0x194
+#define NAME_STRING_DATA_PORT 0x198
+
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/// A structure containing brand string
+typedef struct {
+  CONST CHAR8 *Stringstart;  ///< The literal string
+} CPU_F15_EXCEPTION_BRAND;
+
+/// FAM15_BRAND_STRING_MSR
+typedef struct _PROCESSOR_NAME_STRING {
+  UINT32 lo;                 ///< lower 32-bits of 64-bit value
+  UINT32 hi;                 ///< highest 32-bits of 64-bit value
+} PROCESSOR_NAME_STRING;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+IsException (
+     OUT   UINT32             *ExceptionId,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+F15SetBrandIdRegistersAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+// This is an example, need to be updated once Processor Revision Guide define brand string exception
+// Brand string is always 48 bytes
+CONST CHAR8 ROMDATA str_Exception_0[48] = "AMD Phenom(tm) Octal-Core";
+CONST CHAR8 ROMDATA str_Unprogrammed_Sample[48] = "AMD Unprogrammed Engineering Sample";
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+CONST CPU_F15_EXCEPTION_BRAND ROMDATA CpuF15ExceptionBrandIdString[] =
+{
+  {str_Exception_0}
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set the Processor Name String register based on F5x194/198
+ *
+ * This function copies F5x198_x[B:0] to MSR_C001_00[35:30]
+ *
+ *  @param[in]   FamilyServices      The current Family Specific Services.
+ *  @param[in]   EarlyParams         Service parameters.
+ *  @param[in]   StdHeader           Config handle for library and services.
+ *
+ */
+VOID
+F15SetBrandIdRegistersAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32 PciData;
+  UINT32 ExceptionId;
+  UINT32 MsrIndex;
+  UINT64 MsrData;
+  UINT64 *MsrNameStringPtrPtr;
+  PCI_ADDR PciAddress;
+
+  if (IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, StdHeader)) {
+    if (IsException (&ExceptionId, StdHeader)) {
+      ASSERT (ExceptionId < (sizeof (CpuF15ExceptionBrandIdString) / sizeof (CpuF15ExceptionBrandIdString[0])));
+
+      MsrNameStringPtrPtr = (UINT64 *) CpuF15ExceptionBrandIdString[ExceptionId].Stringstart;
+    } else {
+      OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+      PciAddress.Address.Function = FUNC_5;
+      PciAddress.Address.Register = NAME_STRING_ADDRESS_PORT;
+      // check if D18F5x198_x0 is 00000000h.
+      PciData = 0;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+      PciAddress.Address.Register = NAME_STRING_DATA_PORT;
+      LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+      if (PciData != 0) {
+        for (MsrIndex = 0; MsrIndex <= (MSR_CPUID_NAME_STRING5 - MSR_CPUID_NAME_STRING0); MsrIndex++) {
+          PciAddress.Address.Register = NAME_STRING_ADDRESS_PORT;
+          PciData = MsrIndex * 2;
+          LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+          PciAddress.Address.Register = NAME_STRING_DATA_PORT;
+          LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+          ((PROCESSOR_NAME_STRING *) (&MsrData))->lo = PciData;
+
+          PciAddress.Address.Register = NAME_STRING_ADDRESS_PORT;
+          PciData = (MsrIndex * 2) + 1;
+          LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+          PciAddress.Address.Register = NAME_STRING_DATA_PORT;
+          LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+          ((PROCESSOR_NAME_STRING *) (&MsrData))->hi = PciData;
+
+          LibAmdMsrWrite ((MsrIndex + MSR_CPUID_NAME_STRING0), &MsrData, StdHeader);
+        }
+        return;
+      } else {
+        // It is unprogrammed (unfused) parts and use a name string of "AMD Unprogrammed Engineering Sample"
+        MsrNameStringPtrPtr = (UINT64 *) str_Unprogrammed_Sample;
+      }
+    }
+    // Put values into name MSRs,  Always write the full 48 bytes
+    for (MsrIndex = MSR_CPUID_NAME_STRING0; MsrIndex <= MSR_CPUID_NAME_STRING5; MsrIndex++) {
+      LibAmdMsrWrite (MsrIndex, MsrNameStringPtrPtr, StdHeader);
+      MsrNameStringPtrPtr++;
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Check if it's an exception
+ *
+ * For family 15h, brand string is obtained from F5x198_x[B:0], but there may be exceptions.
+ * This function checks if it's an exception.
+ *
+ *  @param[out]  ExceptionId         Id of exception
+ *  @param[in]   StdHeader           Config handle for library and services.
+ *
+ *  @retval      TRUE                It's an exception
+ *  @retval      FALSE               It's NOT an exception
+ */
+BOOLEAN
+STATIC
+IsException (
+     OUT   UINT32                 *ExceptionId,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  // This function will be updated, once Processor Revision Guide defines Fam15 brand string exception
+  *ExceptionId = 0xFFFF;
+
+  return FALSE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15CacheDefaults.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15CacheDefaults.c
new file mode 100644
index 0000000000..4a83c76e25
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15CacheDefaults.c
@@ -0,0 +1,198 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 ROM Execution Cache Defaults
+ *
+ * Contains default values for ROM execution cache setup
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuCacheInit.h"
+#include "cpuFamilyTranslation.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_CPUF15CACHEDEFAULTS_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF15CacheInfo (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **CacheInfoPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+#define MEM_TRAINING_BUFFER_SIZE  16384
+#define VAR_MTRR_MASK             0x0000FFFFFFFFFFFF
+#define VAR_MTRR_MASK_CP          0x0000FFFFFFFEFFFF
+
+#define HEAP_BASE_MASK_CP         0x0000FFFFFFFEFF00
+#define HEAP_BASE_MASK            0x0000FFFFFFFFFFFF
+
+#define SHARED_MEM_SIZE       0
+
+CONST CACHE_INFO ROMDATA CpuF15CacheInfo =
+{
+  BSP_STACK_SIZE_64K,
+  CORE0_STACK_SIZE,
+  CORE1_STACK_SIZE,
+  MEM_TRAINING_BUFFER_SIZE,
+  SHARED_MEM_SIZE,
+  VAR_MTRR_MASK,
+  VAR_MTRR_MASK,
+  HEAP_BASE_MASK,
+  InfiniteExe
+};
+
+CONST CACHE_INFO ROMDATA CpuF15CacheInfoCP =
+{
+  BSP_STACK_SIZE_64K,
+  CORE0_STACK_SIZE,
+  CORE1_STACK_SIZE,
+  MEM_TRAINING_BUFFER_SIZE,
+  SHARED_MEM_SIZE,
+  VAR_MTRR_MASK,
+  VAR_MTRR_MASK_CP,
+  HEAP_BASE_MASK_CP,
+  InfiniteExe
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the family specific properties of the cache, and its usage.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  CacheInfoPtr             Points to the cache info properties on exit.
+ *  @param[out]  NumberOfElements         Will be one to indicate one entry.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF15CacheInfo (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **CacheInfoPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 Enabled;
+  UINT32 DualCore;
+  UINT32 Node;
+  PCI_ADDR  PciAddress;
+  CPU_SPECIFIC_SERVICES *FamilyServices;
+  AP_MAILBOXES     ApMailboxes;
+  CORE_PAIR_MAP *CorePairMap;
+  AGESA_STATUS IgnoredStatus;
+
+  if (!IsBsp (StdHeader, &IgnoredStatus)) {
+    GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+    ASSERT (FamilyServices != NULL);
+
+    FamilyServices->GetApMailboxFromHardware (FamilyServices, &ApMailboxes, StdHeader);
+    Node = ApMailboxes.ApMailInfo.Fields.Node;
+
+    // Since pre-heap, get compute unit status from hardware, using mailbox info.
+    PciAddress.AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+    PciAddress.Address.Device = PciAddress.Address.Device + Node;
+    PciAddress.Address.Function = FUNC_5;
+    PciAddress.Address.Register = COMPUTE_UNIT_STATUS;
+    LibAmdPciReadBits (PciAddress, 3, 0, &Enabled, StdHeader);
+    LibAmdPciReadBits (PciAddress, 19, 16, &DualCore, StdHeader);
+
+    // Find the core to compute unit mapping for this node.
+    CorePairMap = FamilyServices->CorePairMap;
+    if ((Enabled != 0) && (CorePairMap != NULL)) {
+      while (CorePairMap->Enabled != 0xFF) {
+        if ((Enabled == CorePairMap->Enabled) && (DualCore == CorePairMap->DualCore)) {
+          break;
+        }
+        CorePairMap++;
+      }
+      // The assert is for finding a processor configured in a way the core pair map doesn't support.
+      ASSERT (CorePairMap->Enabled != 0xFF);
+      switch (CorePairMap->Mapping) {
+      case AllCoresMapping:
+        // No cores are sharing a compute unit
+        *CacheInfoPtr = &CpuF15CacheInfo;
+        break;
+      case EvenCoresMapping:
+        // Cores are paired into compute units
+        *CacheInfoPtr = &CpuF15CacheInfoCP;
+        break;
+      default:
+        ASSERT (FALSE);
+      }
+    }
+  } else {
+    // the BSC is always just the first slice, we could return either one. Return the non for safest.
+    *CacheInfoPtr = &CpuF15CacheInfo;
+  }
+  *NumberOfElements = 1;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Dmi.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Dmi.c
new file mode 100644
index 0000000000..0582a9c4b9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Dmi.c
@@ -0,0 +1,124 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD DMI Record Creation API, and related functions for Family 15h.
+ *
+ * Contains code that produce the DMI related information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuLateInit.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuServices.h"
+#include "cpuF15Dmi.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_CPUF15DMI_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE            PstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DmiF15GetMaxSpeed
+ *
+ *    Get the Max Speed
+ *
+ *    @param[in]      StdHeader      Standard Head Pointer
+ *
+ *    @retval  MaxSpeed   - CPU Max Speed.
+ *
+ */
+UINT16
+DmiF15GetMaxSpeed (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT8 NumBoostStates;
+  UINT32 P0Frequency;
+  UINT32 PciData;
+  PCI_ADDR PciAddress;
+  PSTATE_CPU_FAMILY_SERVICES  *FamilyServices;
+
+  FamilyServices = NULL;
+  GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  ASSERT (FamilyServices != NULL);
+
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_4, 0x15C);
+  LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+  NumBoostStates = (UINT8) ((PciData >> 2) & 7);
+
+  FamilyServices->GetPstateFrequency (FamilyServices, NumBoostStates, &P0Frequency, StdHeader);
+  return ((UINT16) P0Frequency);
+}
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Dmi.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Dmi.h
new file mode 100644
index 0000000000..a5a021f111
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Dmi.h
@@ -0,0 +1,77 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD DMI Record Creation API, and related functions for Family 15h.
+ *
+ * Contains code that produce the DMI related information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 44737 $   @e \$Date: 2011-01-05 00:59:55 -0700 (Wed, 05 Jan 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F15_DMI_H_
+#define _CPU_F15_DMI_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+UINT16
+DmiF15GetMaxSpeed (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+#endif  // _CPU_F15_DMI_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15MsrTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15MsrTables.c
new file mode 100644
index 0000000000..e91402940c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15MsrTables.c
@@ -0,0 +1,136 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 MSR tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 54966 $   @e \$Date: 2011-06-14 23:46:12 -0600 (Tue, 14 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_CPUF15MSRTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F15MsrRegisters[] =
+{
+//  M S R    T a b l e s
+// ----------------------
+
+// MSR_HWCR (0xC0010015)
+// bit[4] = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_HWCR,                              // MSR Address
+      0x0000000000000010,                    // OR Mask
+      0x0000000000000010,                    // NAND Mask
+    }}
+  },
+// MSR_NB_CFG (0xC001001F)
+// bit[23] = 1, erratum #663
+// bit[54] InitApicIdCpuIdLo = 1
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_NB_CFG,                            // MSR Address
+      0x0040000000800000,                    // OR Mask
+      0x0040000000800000,                    // NAND Mask
+    }}
+  },
+// This MSR should be set after the code that most errata would be applied in
+// MSR_MC0_CTL (0x00000400)
+// bits[63:0]  = 0xFFFFFFFFFFFFFFFF
+  {
+    MsrRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                            // platformFeatures
+    {{
+      MSR_MC0_CTL,                           // MSR Address
+      0xFFFFFFFFFFFFFFFF,                    // OR Mask
+      0xFFFFFFFFFFFFFFFF,                    // NAND Mask
+    }}
+  }
+};
+
+CONST REGISTER_TABLE ROMDATA F15MsrRegisterTable = {
+  AllCores,
+  (sizeof (F15MsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  (TABLE_ENTRY_FIELDS *)F15MsrRegisters,
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PciTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PciTables.c
new file mode 100644
index 0000000000..c0085c7d41
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PciTables.c
@@ -0,0 +1,206 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15  PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 59440 $   @e \$Date: 2011-09-22 19:44:44 -0600 (Thu, 22 Sep 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_CPUF15PCITABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+//  P C I    T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F15PciRegisters[] =
+{
+// F2x1B0 - Extended Memory Controller Configuration Low
+// bits[10:8], CohPrefPrbLmt = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_2, 0x1B0),  // Address
+      0x00000100,                           // regData
+      0x00000700,                           // regMask
+    }}
+  },
+
+// Function 3 - Misc. Control
+
+// F3x6C - Data Buffer Count
+// bits[30:28] IsocRspDBC = 1
+// bits[18:16] UpRspDBC = 1
+// bits[7:6]   DnRspDBC = 1
+// bits[5:4]   DnReqDBC = 1
+// bits[2:0]   UpReqDBC = 2
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x6C),  // Address
+      0x10010052,                           // regData
+      0x700700F7,                           // regMask
+    }}
+  },
+// F3xA0 - Power Control Miscellaneous
+// bits[13:11] PllLockTime = 1
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0),  // Address
+      0x00000800,                           // regData
+      0x00003800,                           // regMask
+    }}
+  },
+// F3xA4 - Reported Temperature Control
+// bits[12:8] PerStepTimeDn = 0x0F
+// bits[7] TmpSlewDnEn = 1
+// bits[6:5] TmpMaxDiffUp = 3
+// bits[4:0] PerStepTimeUp = 0x0F
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA4),  // Address
+      0x00000FEF,                           // regData
+      0x00001FFF,                           // regMask
+    }}
+  },
+// F3xDC - Clock Power Timing Control 2
+// bit [26]    IgnCpuPrbEn = 1
+// bits[14:12] NbsynPtrAdj = 5
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0xDC),  // Address
+      0x04005000,                           // regData
+      0x04007000,                           // regMask
+    }}
+  },
+// F3x1CC - IBS Control
+// bits[8] LvtOffsetVal = 1
+// bits[3:0] LvtOffset = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1CC), // Address
+      0x00000100,                           // regData
+      0x0000010F,                           // regMask
+    }}
+  },
+// F4x15C - Core Performance Boost Control
+// bits[1:0] BoostSrc = 0
+  {
+    PciRegister,
+    {
+      AMD_FAMILY_15,                      // CpuFamily
+      AMD_F15_ALL                         // CpuRevision
+    },
+    {AMD_PF_ALL},                           // platformFeatures
+    {{
+      MAKE_SBDFO (0, 0, 24, FUNC_4, 0x15C), // Address
+      0x00000000,                           // regData
+      0x00000003,                           // regMask
+    }}
+  },
+};
+
+CONST REGISTER_TABLE ROMDATA F15PciRegisterTable = {
+  PrimaryCores,
+  (sizeof (F15PciRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+  F15PciRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PowerCheck.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PowerCheck.c
new file mode 100644
index 0000000000..6242410a23
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PowerCheck.c
@@ -0,0 +1,441 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 P-State power check
+ *
+ * Performs the "Processor-Systemboard Power Delivery Compatibility Check" as
+ * described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 56273 $   @e \$Date: 2011-07-11 12:53:52 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF15PowerCheck.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_CPUF15POWERCHECK_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F15PwrCheckAllCoresGoToLegalPstate (
+  IN       VOID *ErrorData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+F15PwrCheckPrimaryCoresAdjustPstates (
+  IN       VOID *ErrorData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+F15PwrCheckAllCoresGoToCurrentPs (
+  IN     VOID *ErrorData,
+  IN     AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+F15PmPwrChkCopyPstate (
+  IN     UINT8 Dest,
+  IN     UINT8 Src,
+  IN     AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 15h core 0 entry point for performing the family 15h Processor-
+ * Systemboard Power Delivery Check.
+ *
+ * The steps are as follows:
+ *    1. Starting with SW P0, loop through all P-states until a passing state
+ *       is found.  A passing state is one in which the current required by
+ *       the CPU is less than the maximum amount of current that the system
+ *       can provide to the CPU.  If P0 is under the limit, no further action
+ *       is necessary.
+ *    2. If at least one P-State is under the limit & at least one P-State is
+ *       over the limit, the BIOS must:
+ *       a. If the processor's current P-State is disabled by the power check,
+ *          then the BIOS must request a transition to an enabled P-state
+ *          using MSRC001_0062[PstateCmd] and wait for MSRC001_0063[CurPstate]
+ *          to reflect the new value.
+ *       b. Program D18F4x15C[BoostSrc] to zero.
+ *       c. Copy the contents of the enabled P-state MSRs to the highest
+ *          performance P-state locations.
+ *       d. Request a P-state transition to the P-state MSR containing the
+ *          COF/VID values currently applied.
+ *       e. Adjust the following P-state parameters affected by the P-state
+ *          MSR copy by subtracting the number of P-states that are disabled
+ *          by the power check.
+ *          1. F3x64[HtcPstateLimit]
+ *          2. F3x68[SwPstateLimit]
+ *          3. F3xDC[PstateMaxVal]
+ *    3. If all P-States are over the limit, the BIOS must:
+ *       a. If the processor's current P-State is !=F3xDC[PstateMaxVal], then
+ *          write F3xDC[PstateMaxVal] to MSRC001_0062[PstateCmd] and wait for
+ *          MSRC001_0063[CurPstate] to reflect the new value.
+ *       b. If MSRC001_0061[PstateMaxVal]!=000b, copy the contents of the P-state
+ *          MSR pointed to by F3xDC[PstateMaxVal] to the software P0 MSR.
+ *          Write 000b to MSRC001_0062[PstateCmd] and wait for MSRC001_0063
+ *          [CurPstate] to reflect the new value.
+ *       c. Adjust the following P-state parameters to zero:
+ *          1. F3x64[HtcPstateLimit]
+ *          2. F3x68[SwPstateLimit]
+ *          3. F3xDC[PstateMaxVal]
+ *       d. Program D18F4x15C[BoostSrc] to zero.
+ *
+ * @param[in]  FamilySpecificServices  The current Family Specific Services.
+ * @param[in]  CpuEarlyParams          Service parameters
+ * @param[in]  StdHeader               Config handle for library and services.
+ *
+ */
+VOID
+F15PmPwrCheck (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT8       DisPsNum;
+  UINT8       PsMaxVal;
+  UINT8       Pstate;
+  UINT32      ProcIddMax;
+  UINT32      LocalPciRegister;
+  UINT32      Socket;
+  UINT32      Module;
+  UINT32      Core;
+  UINT32      AndMask;
+  UINT32      OrMask;
+  UINT32      PstateLimit;
+  UINT32            HighCore;
+  UINT32            LowCore;
+  UINT32            ModuleIndex;
+  UINT64      LocalMsrRegister;
+  BOOLEAN           AllPstatesDisabled;
+  AP_TASK     TaskPtr;
+  PCI_ADDR          PciAddress;
+  AGESA_STATUS IgnoredSts;
+  PWRCHK_ERROR_DATA ErrorData;
+
+  // get the socket number
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+
+  ASSERT (Core == 0);
+
+  // get the Max P-state value
+  for (PsMaxVal = NM_PS_REG - 1; PsMaxVal != 0; --PsMaxVal) {
+    LibAmdMsrRead (PS_REG_BASE + PsMaxVal, &LocalMsrRegister, StdHeader);
+    if (((F15_PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1) {
+      break;
+    }
+  }
+
+  ErrorData.HwPstateNumber = (UINT8) (PsMaxVal + 1);
+  GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+  PciAddress.Address.Function = FUNC_4;
+  PciAddress.Address.Register = CPB_CTRL_REG;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F4x15C
+  ErrorData.NumberOfBoostStates = (UINT8) ((F15_CPB_CTRL_REGISTER *) &LocalPciRegister)->NumBoostStates;
+
+  // Starting with SW P0, loop through all P-states until a passing state
+  // is found.  A passing state is one in which the current required by
+  // the CPU is less than the maximum amount of current that the system
+  // can provide to the CPU.  If P0 is under the limit, no further action
+  // is necessary.
+  DisPsNum = 0;
+  AllPstatesDisabled = TRUE;
+
+  for (Pstate = ErrorData.NumberOfBoostStates; Pstate < ErrorData.HwPstateNumber; Pstate++) {
+    if (FamilySpecificServices->GetProcIddMax (FamilySpecificServices, Pstate, &ProcIddMax, StdHeader)) {
+      if (ProcIddMax > CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].CurrentLimit) {
+        // Add to event log the Pstate that exceeded the current limit
+        PutEventLog (AGESA_WARNING,
+                     CPU_EVENT_PM_PSTATE_OVERCURRENT,
+                     Socket, Pstate, 0, 0, StdHeader);
+        DisPsNum++;
+      } else {
+        AllPstatesDisabled = FALSE;
+        break;
+      }
+    }
+  }
+
+  if (DisPsNum != 0) {
+    ErrorData.NumberOfSwPstatesDisabled = DisPsNum;
+
+    if (AllPstatesDisabled) {
+      // All P-states are over the limit
+    PutEventLog (AGESA_FATAL,
+                 CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT,
+                 Socket, 0, 0, 0, StdHeader);
+      ErrorData.NumberOfSwPstatesDisabled--;
+  }
+
+    // Launch APs to transition to a valid P-state
+    TaskPtr.FuncAddress.PfApTaskI = F15PwrCheckAllCoresGoToLegalPstate;
+    TaskPtr.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (PWRCHK_ERROR_DATA);
+    TaskPtr.DataTransfer.DataPtr = &ErrorData;
+    TaskPtr.DataTransfer.DataTransferFlags = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParams);
+
+    // If any software P-states are disabled, then program D18F4x15C[BoostSrc] to zero.
+      AndMask = 0xFFFFFFFF;
+      ((F15_CPB_CTRL_REGISTER *) &AndMask)->BoostSrc = 0;
+      OrMask = 0x00000000;
+      OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F4x15C
+
+    // Modify P-state MSRs on one core per die
+    TaskPtr.FuncAddress.PfApTaskI = F15PwrCheckPrimaryCoresAdjustPstates;
+
+    for (ModuleIndex = 0; ModuleIndex < GetPlatformNumberOfModules (); ModuleIndex++) {
+        if (ModuleIndex != Module) {
+          if (GetGivenModuleCoreRange (Socket, ModuleIndex, &LowCore, &HighCore, StdHeader)) {
+            ApUtilRunCodeOnSocketCore ((UINT8)Socket, (UINT8)LowCore, &TaskPtr, StdHeader);
+          }
+        }
+      }
+    F15PwrCheckPrimaryCoresAdjustPstates (&ErrorData, StdHeader);
+
+    // Launch APs to transition to the current P-state at its new location
+    TaskPtr.FuncAddress.PfApTaskI = F15PwrCheckAllCoresGoToCurrentPs;
+    ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParams);
+
+    // Final Step
+    //    F3x64[HtPstatelimit] -= disPsNum
+    //    F3x68[SwPstateLimit] -= disPsNum
+    //    F3xDC[PstateMaxVal] -= disPsNum
+
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = HTC_REG;
+    AndMask = 0xFFFFFFFF;
+    ((HTC_REGISTER *) &AndMask)->HtcPstateLimit = 0;
+    OrMask = 0x00000000;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3x64
+    PstateLimit = ((HTC_REGISTER *) &LocalPciRegister)->HtcPstateLimit;
+    if (PstateLimit > ErrorData.NumberOfSwPstatesDisabled) {
+      PstateLimit -= ErrorData.NumberOfSwPstatesDisabled;
+      ((HTC_REGISTER *) &OrMask)->HtcPstateLimit = PstateLimit;
+    }
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F3x64
+
+    PciAddress.Address.Register = SW_PS_LIMIT_REG;
+    AndMask = 0xFFFFFFFF;
+    ((SW_PS_LIMIT_REGISTER *) &AndMask)->SwPstateLimit = 0;
+    OrMask = 0x00000000;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3x68
+    PstateLimit = ((SW_PS_LIMIT_REGISTER *) &LocalPciRegister)->SwPstateLimit;
+    if (PstateLimit > ErrorData.NumberOfSwPstatesDisabled) {
+      PstateLimit -= ErrorData.NumberOfSwPstatesDisabled;
+      ((SW_PS_LIMIT_REGISTER *) &OrMask)->SwPstateLimit = PstateLimit;
+    }
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F3x68
+
+    PciAddress.Address.Register = CPTC2_REG;
+    AndMask = 0xFFFFFFFF;
+    ((CLK_PWR_TIMING_CTRL2_REGISTER *) &AndMask)->PstateMaxVal = 0;
+    OrMask = 0x00000000;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3xDC
+    PstateLimit = ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal;
+    if (PstateLimit > ErrorData.NumberOfSwPstatesDisabled) {
+      PstateLimit -= ErrorData.NumberOfSwPstatesDisabled;
+      ((CLK_PWR_TIMING_CTRL2_REGISTER *) &OrMask)->PstateMaxVal = PstateLimit;
+    }
+    OptionMultiSocketConfiguration.ModifyCurrSocketPci (&PciAddress, AndMask, OrMask, StdHeader); // F3xDC
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * First phase core-level error handler called if any p-states were determined
+ * to be out of range for the mother board.
+ *
+ * Transitions to a legal P-state if necessary (steps 2a and 3a) on each core.
+ *
+ * @param[in]  ErrorData            Details about the error condition.
+ * @param[in]  StdHeader            Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F15PwrCheckAllCoresGoToLegalPstate (
+  IN       VOID *ErrorData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8                 CurrentPs;
+  UINT64 LocalMsrRegister;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  if (IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, StdHeader)) {
+    LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+    CurrentPs = (UINT8) (((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate);
+
+    if (CurrentPs < ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled) {
+      GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+          FamilySpecificServices->TransitionPstate (FamilySpecificServices, ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled, (BOOLEAN) TRUE, StdHeader);
+        }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Core-level error handler called if any p-states were determined to be out
+ * of range for the mother board.
+ *
+ * This function implements steps 2c and the first half of 3b on one core per die.
+ *
+ * @param[in]  ErrorData            Details about the error condition.
+ * @param[in]  StdHeader            Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F15PwrCheckPrimaryCoresAdjustPstates (
+  IN       VOID *ErrorData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8  i;
+  UINT8  HwPsMaxVal;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+  HwPsMaxVal = (((PWRCHK_ERROR_DATA *) ErrorData)->HwPstateNumber - 1);
+        for (i = ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfBoostStates; (i + ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled) <= HwPsMaxVal; i++) {
+          F15PmPwrChkCopyPstate (i, (i + ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled), StdHeader);
+        }
+
+    // Disable the appropriate P-states if any, starting from HW Pmin
+  for (i = 0; i < ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled; i++) {
+      FamilySpecificServices->DisablePstate (FamilySpecificServices, (HwPsMaxVal - i), StdHeader);
+    }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Second phase core-level error handler called if any p-states were determined
+ * to be out of range for the mother board.
+ *
+ * Transitions to the core's current P-state in its new location (steps 2d and
+ * the second half of 3b) on each core.
+ *
+ * @param[in]  ErrorData            Details about the error condition.
+ * @param[in]  StdHeader            Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F15PwrCheckAllCoresGoToCurrentPs (
+  IN       VOID *ErrorData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8                 CurrentPs;
+  UINT64                LocalMsrRegister;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  if (IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, StdHeader)) {
+    GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+    LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+    CurrentPs = (UINT8) (((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate) - ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled;
+
+    FamilySpecificServices->TransitionPstate (FamilySpecificServices, CurrentPs, (BOOLEAN) TRUE, StdHeader);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Copies the contents of one P-State MSR to another.
+ *
+ * @param[in]  Dest              Destination p-state number
+ * @param[in]  Src               Source p-state number
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+STATIC
+F15PmPwrChkCopyPstate (
+  IN       UINT8 Dest,
+  IN       UINT8 Src,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 LocalMsrRegister;
+
+  LibAmdMsrRead ((UINT32) (PS_REG_BASE + Src), &LocalMsrRegister, StdHeader);
+  LibAmdMsrWrite ((UINT32) (PS_REG_BASE + Dest), &LocalMsrRegister, StdHeader);
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PowerCheck.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PowerCheck.h
new file mode 100644
index 0000000000..ae613bee9b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PowerCheck.h
@@ -0,0 +1,82 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Power related functions and structures
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 56273 $   @e \$Date: 2011-07-11 12:53:52 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F15_POWER_CHECK_H_
+#define _CPU_F15_POWER_CHECK_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// Power Check Error Data
+typedef struct {
+  UINT8 HwPstateNumber;               ///< Number of hardware P-states
+  UINT8 NumberOfBoostStates;          ///< Number of boosted P-states
+  UINT8 NumberOfSwPstatesDisabled;    ///< Number of software P-states disabled
+} PWRCHK_ERROR_DATA;
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F15PmPwrCheck (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+#endif  // _CPU_F15_POWER_CHECK_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PowerMgmt.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PowerMgmt.h
new file mode 100644
index 0000000000..aba4b41a29
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15PowerMgmt.h
@@ -0,0 +1,293 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 Power Management related registers defination
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 52710 $   @e \$Date: 2011-05-10 15:58:53 -0600 (Tue, 10 May 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPUF15POWERMGMT_H_
+#define _CPUF15POWERMGMT_H_
+
+/*
+ * Family 15h CPU Power Management MSR definitions
+ *
+ */
+
+
+/* Last Branch From IP Register 0x000001DB */
+#define MSR_BR_FROM                 0x000001DB
+
+/* P-state Current Limit Register 0xC0010061 */
+#define MSR_PSTATE_CURRENT_LIMIT 0xC0010061  // F15 Shared
+
+/// Pstate Current Limit MSR Register
+typedef struct {
+  UINT64 CurPstateLimit:3;           ///< Current Pstate Limit
+  UINT64 :1;                         ///< Reserved
+  UINT64 PstateMaxVal:3;             ///< Pstate Max Value
+  UINT64 :57;                        ///< Reserved
+} PSTATE_CURLIM_MSR;
+
+
+/* P-state Control Register 0xC0010062 */
+#define MSR_PSTATE_CTL 0xC0010062    // F15 Shared
+
+/// Pstate Control MSR Register
+typedef struct {
+  UINT64 PstateCmd:3;                ///< Pstate change command
+  UINT64 :61;                        ///< Reserved
+} PSTATE_CTRL_MSR;
+
+
+/* P-state Status Register 0xC0010063 */
+#define MSR_PSTATE_STS 0xC0010063
+
+/// Pstate Status MSR Register
+typedef struct {
+  UINT64 CurPstate:3;                ///< Current Pstate
+  UINT64 :61;                        ///< Reserved
+} PSTATE_STS_MSR;
+
+
+/* P-state Registers 0xC001006[B:4] */
+#define MSR_PSTATE_0 0xC0010064
+#define MSR_PSTATE_1 0xC0010065
+#define MSR_PSTATE_2 0xC0010066
+#define MSR_PSTATE_3 0xC0010067
+#define MSR_PSTATE_4 0xC0010068
+#define MSR_PSTATE_5 0xC0010069
+#define MSR_PSTATE_6 0xC001006A
+#define MSR_PSTATE_7 0xC001006B
+
+#define PS_REG_BASE MSR_PSTATE_0     /* P-state Register base */
+#define PS_MAX_REG  MSR_PSTATE_7     /* Maximum P-State Register */
+#define PS_MIN_REG  MSR_PSTATE_0     /* Minimum P-State Register */
+#define NM_PS_REG 8                  /* number of P-state MSR registers */
+
+/// P-state MSR with common field
+typedef struct {
+  UINT64 :63;                        ///< CpuFid
+  UINT64 PsEnable:1;                 ///< Pstate Enable
+} F15_PSTATE_MSR;
+
+
+/* C-state Address Register 0xC0010073 */
+#define MSR_CSTATE_ADDRESS 0xC0010073
+
+/// C-state Address MSR Register
+typedef struct {
+  UINT64 CstateAddr:16;              ///< C-state address
+  UINT64 :48;                        ///< Reserved
+} CSTATE_ADDRESS_MSR;
+
+
+/*
+ * Family 15h CPU Power Management PCI definitions
+ *
+ */
+
+/* Extended Memory Controller Configuration Low Register F2x1B0 */
+#define EXT_MEMCTRL_CFG_LOW_REG 0x1B0
+
+/// Extended Memory Controller Configuration Low PCI Register
+typedef struct {
+  UINT32 AdapPrefMissRatio:2;        ///< Adaptive prefetch miss ratio
+  UINT32 AdapPrefPositiveStep:2;     ///< Adaptive prefetch positive step
+  UINT32 AdapPrefNegativeStep:2;     ///< Adaptive prefetch negative step
+  UINT32 :2;                         ///< Reserved
+  UINT32 CohPrefPrbLmt:3;            ///< Coherent prefetch probe limit
+  UINT32 DisIoCohPref:1;             ///< Disable coherent prefetched for IO
+  UINT32 EnSplitDctLimits:1;         ///< Split DCT write limits enable
+  UINT32 SpecPrefDis:1;              ///< Speculative prefetch disable
+  UINT32 SpecPrefMis:1;              ///< Speculative prefetch predict miss
+  UINT32 SpecPrefThreshold:3;        ///< Speculative prefetch threshold
+  UINT32 :4;                         ///< Reserved
+  UINT32 PrefFourConf:3;             ///< Prefetch four-ahead confidence
+  UINT32 PrefFiveConf:3;             ///< Prefetch five-ahead confidence
+  UINT32 DcqBwThrotWm:4;             ///< Dcq bandwidth throttle watermark
+} EXT_MEMCTRL_CFG_LOW_REGISTER;
+
+
+/* Hardware thermal control register F3x64 */
+#define HTC_REG 0x64
+
+/// Hardware Thermal Control PCI Register
+typedef struct {
+  UINT32 HtcEn:1;                    ///< HTC Enable
+  UINT32 :3;                         ///< Reserved
+  UINT32 HtcAct:1;                   ///< HTC Active State
+  UINT32 HtcActSts:1;                ///< HTC Active Status
+  UINT32 PslApicHiEn:1;              ///< P-state limit higher APIC int enable
+  UINT32 PslApicLoEn:1;              ///< P-state limit lower APIC int enable
+  UINT32 :8;                         ///< Reserved
+  UINT32 HtcTmpLmt:7;                ///< HTC temperature limit
+  UINT32 HtcSlewSel:1;               ///< HTC slew-controlled temp select
+  UINT32 HtcHystLmt:4;               ///< HTC hysteresis
+  UINT32 HtcPstateLimit:3;           ///< HTC P-state limit select
+  UINT32 :1;                         ///< Reserved
+} HTC_REGISTER;
+
+
+/* Software P-state limit register F3x68 */
+#define SW_PS_LIMIT_REG 0x68
+
+/// Software P-state Limit PCI Register
+typedef struct {
+  UINT32 :5;                         ///< Reserved
+  UINT32 SwPstateLimitEn:1;          ///< Software P-state limit enable
+  UINT32 :22;                        ///< Reserved
+  UINT32 SwPstateLimit:3;            ///< HTC P-state limit select
+  UINT32 :1;                         ///< Reserved
+} SW_PS_LIMIT_REGISTER;
+
+/* ACPI Power State Control Registers F3x84:80 */
+
+/// System Management Action Field (SMAF) Register
+typedef struct {
+  UINT8 CpuPrbEn:1;                  ///< CPU direct probe enable
+  UINT8 NbLowPwrEn:1;                ///< Northbridge low-power enable
+  UINT8 NbGateEn:1;                  ///< Northbridge gate enable
+  UINT8 Reserved:2;                  ///< Reserved
+  UINT8 ClkDivisor:3;                ///< Clock divisor
+} SMAF_REGISTER;
+
+/// union type for ACPI State SMAF setting
+typedef union {
+  UINT8 SMAFValue;                   ///< SMAF raw value
+  SMAF_REGISTER SMAF;                ///< SMAF structure
+} ACPI_STATE_SMAF;
+
+/// ACPI Power State Control Register F3x80
+typedef struct {
+  ACPI_STATE_SMAF C2;                ///< [7:0]   SMAF Code 000b - C2
+  ACPI_STATE_SMAF C1eLinkInit;       ///< [15:8]  SMAF Code 001b - C1e or Link init
+  ACPI_STATE_SMAF SmafAct2;          ///< [23:16] SMAF Code 010b
+  ACPI_STATE_SMAF S1;                ///< [31:24] SMAF Code 011b - S1
+} ACPI_PSC_0_REGISTER;
+
+/// ACPI Power State Control Register F3x84
+typedef struct {
+  ACPI_STATE_SMAF S3;                 ///< [7:0]   SMAF Code 100b - S3
+  ACPI_STATE_SMAF Throttling;         ///< [15:8]  SMAF Code 101b - Throttling
+  ACPI_STATE_SMAF S4S5;               ///< [23:16] SMAF Code 110b - S4/S5
+  ACPI_STATE_SMAF C1;                 ///< [31:24] SMAF Code 111b - C1
+} ACPI_PSC_4_REGISTER;
+
+
+/* Popup P-state Register F3xA8 */
+#define POPUP_PSTATE_REG 0xA8
+#define POPUP_PSTATE_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, POPUP_PSTATE_REG))
+
+/// Popup P-state Register
+typedef struct {
+  UINT32 :29;                        ///< Reserved
+  UINT32 PopDownPstate:3;            ///< PopDownPstate
+} POPUP_PSTATE_REGISTER;
+
+
+/* Clock Power/Timing Control 2 Register F3xDC */
+#define CPTC2_REG 0xDC
+#define CPTC2_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, CPTC2_REG))
+
+/// Clock Power Timing Control 2 PCI Register
+typedef struct {
+  UINT32 :8;                         ///< Reserved
+  UINT32 PstateMaxVal:3;             ///< P-state maximum value
+  UINT32 :1;                         ///< Reserved
+  UINT32 NbsynPtrAdj:3;              ///< NB/Core sync FIFO ptr adjust
+  UINT32 :1;                         ///< Reserved
+  UINT32 CacheFlushOnHaltCtl:3;      ///< Cache flush on halt control
+  UINT32 CacheFlushOnHaltTmr:7;      ///< Cache flush on halt timer
+  UINT32 IgnCpuPrbEn:1;              ///< ignore CPU probe enable
+  UINT32 :5;                         ///< Reserved
+} CLK_PWR_TIMING_CTRL2_REGISTER;
+
+
+/* Core Performance Boost Control Register D18F4x15C */
+#define CPB_CTRL_REG 0x15C
+#define CPB_CTRL_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, CPB_CTRL_REG))
+
+/// Core Performance Boost Control Register of Family 15h common aceess
+typedef struct {
+  UINT32 BoostSrc:2;                 ///< Boost source
+  UINT32 NumBoostStates:3;           ///< Number of boosted states
+  UINT32 :2;                         ///< Reserved
+  UINT32 ApmMasterEn:1;              ///< APM master enable
+  UINT32 :23;                        ///< Reserved
+  UINT32 BoostLock:1;                ///<
+} F15_CPB_CTRL_REGISTER;
+
+
+#define NM_NB_PS_REG 4               /* Number of NB P-state registers */
+
+/* Northbridge P-state */
+#define NB_PSTATE_0 0x160
+#define NB_PSTATE_0_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_0))
+
+#define NB_PSTATE_1 0x164
+#define NB_PSTATE_1_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_1))
+
+#define NB_PSTATE_2 0x168
+#define NB_PSTATE_2_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_2))
+
+#define NB_PSTATE_3 0x16C
+#define NB_PSTATE_3_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_3))
+
+
+/* Northbridge P-state Status */
+#define F15_NB_PSTATE_CTRL 0x170
+#define F15_NB_PSTATE_CTRL_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, F15_NB_PSTATE_CTRL))
+
+/// Northbridge P-state Control Register
+typedef struct {
+  UINT32 NbPstateMaxVal:2;           ///< NB P-state maximum value
+  UINT32 :1;                         ///< Reserved
+  UINT32 NbPstateLo:2;               ///< NB P-state low
+  UINT32 :1;                         ///< Reserved
+  UINT32 NbPstateHi:2;               ///< NB P-state high
+  UINT32 :1;                         ///< Reserved
+  UINT32 NbPstateThreshold:3;        ///< NB P-state threshold
+  UINT32 :1;                         ///< Reserved
+  UINT32 NbPstateDisOnP0:1;          ///< NB P-state disable on P0
+  UINT32 SwNbPstateLoDis:1;          ///< Software NB P-state low disable
+  UINT32 :17;                        ///< Reserved
+} F15_NB_PSTATE_CTRL_REGISTER;
+
+
+#endif /* _CPUF15POWERMGMT_H */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Utilities.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Utilities.c
new file mode 100644
index 0000000000..55b6a052ab
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Utilities.c
@@ -0,0 +1,1178 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 15h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 54901 $   @e \$Date: 2011-06-13 21:51:47 -0600 (Mon, 13 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuF15PowerMgmt.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuF15Utilities.h"
+#include "cpuEarlyInit.h"
+#include "cpuPostInit.h"
+#include "cpuFeatures.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X15_CPUF15UTILITIES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern CPU_FAMILY_SUPPORT_TABLE            PstateFamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION    OptionMultiSocketConfiguration;
+
+// HT Phy registers used in code.
+#define HT_PHY_FUSE_PROC_DLL_PROCESS_COMP_RD_SL0 0x4011
+#define HT_PHY_FUSE_PROC_DLL_PROCESS_COMP_RD_SL1 0x4411
+#define HT_PHY_LINK_PHY_RECEIVER_PROCESS_DLL_CONTROL_RD  0x400F
+#define HT_PHY_LINK_PHY_RECEIVER_PROCESS_DLL_CONTROL_SL0 0x520F
+#define HT_PHY_LINK_PHY_RECEIVER_PROCESS_DLL_CONTROL_SL1 0x530F
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * HT PHY DLL Process Compensation Lookup Table.
+ *
+ * If the hardware provides compensation values, the value is provided by accessing the bitfield
+ * [HiBit:LoBit].  Otherwise, a default value will be used.
+ *
+ */
+typedef struct {
+  UINT32   DefaultComp;                       ///< The default compensation value if not provided by hardware.
+  UINT8    CtlIndexLoBit;                     ///< The low bit position of the compensation value.
+  UINT8    CtlIndexHiBit;                     ///< The high bit position of the compensation value.
+} HT_PHY_DLL_COMP_LOOKUP_TABLE;
+
+/**
+ * Process Compensation Fuses for HT PHY, Link Phy Receiver Process Fuse Control Register.
+ */
+typedef struct {
+  UINT32   :11;
+  UINT32   DllProcessComp10:2;                     ///< [12:11] DLL Process Comp bits [1:0], this phy's adjustment.
+  UINT32   DllProcessComp2:1;                      ///< [13] DLL Process Comp bit 2, Increment or Decrement.
+  UINT32   : (31 - 13);
+} LINK_PHY_RECEIVER_PROCESS_FUSE_CONTROL_FIELDS;
+
+/// Access register as fields or uint32 value.
+typedef union {
+  UINT32   Value;                                         ///< 32 bit value for register access
+  LINK_PHY_RECEIVER_PROCESS_FUSE_CONTROL_FIELDS Fields;   ///< The register bit fields
+} LINK_PHY_RECEIVER_PROCESS_FUSE_CONTROL;
+
+/**
+ * Link Phy Receiver Process DLL Control Register.
+ */
+typedef struct {
+  UINT32   DllProcessFreqCtlIndex2:4;              ///< [3:0] The DLL Compensation override.
+  UINT32   : (12 - 4);
+  UINT32   DllProcessFreqCtlOverride:1;            ///< [12] Enable DLL Compensation overriding.
+  UINT32   : (31 - 12);
+} LINK_PHY_RECEIVER_PROCESS_DLL_CONTROL_FIELDS;
+
+/// Access register as fields or uint32 value.
+typedef union {
+  UINT32    Value;                                       ///< 32 bit value for register access
+  LINK_PHY_RECEIVER_PROCESS_DLL_CONTROL_FIELDS Fields;   ///< The register bit fields
+} LINK_PHY_RECEIVER_PROCESS_DLL_CONTROL;
+
+/**
+ * Provide the HT PHY DLL compensation value for each HT Link frequency.
+ *
+ * The HT Frequency enum is not contiguous, there are skipped values.  Rather than complicate
+ * index calculations, add Invalid entries here marked with an invalid compensation value (invalid
+ * because real compensation values are 0 .. 15).
+ */
+CONST STATIC HT_PHY_DLL_COMP_LOOKUP_TABLE ROMDATA HtPhyDllCompLookupTable[] = {
+  {0xAul, 0, 3},               //   HT_FREQUENCY_1200M
+  {0xAul, 0, 3},               //   HT_FREQUENCY_1400M
+  {0x7ul, 4, 7},               //   HT_FREQUENCY_1600M
+  {0x7ul, 4, 7},               //   HT_FREQUENCY_1800M
+  {0x5ul, 8, 11},              //   HT_FREQUENCY_2000M
+  {0x5ul, 8, 11},              //   HT_FREQUENCY_2200M
+  {0x4ul, 12, 15},             //   HT_FREQUENCY_2400M
+  {0x3ul, 16, 19},             //   HT_FREQUENCY_2600M
+  {0xFFFFFFFFul, 0, 0},        //   Invalid
+  {0xFFFFFFFFul, 0, 0},        //   Invalid
+  {0x3ul, 20, 23},             //   HT_FREQUENCY_2800M
+  {0x2ul, 24, 27},             //   HT_FREQUENCY_3000M
+  {0x2ul, 28, 31}              //   HT_FREQUENCY_3200M
+};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Disables the desired P-state.
+ *
+ *  @CpuServiceMethod{::F_CPU_DISABLE_PSTATE}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]   StateNumber              The P-State to disable.
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F15DisablePstate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8 StateNumber,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 LocalMsrRegister;
+
+  ASSERT (StateNumber < NM_PS_REG);
+  LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+  ((F15_PSTATE_MSR *) &LocalMsrRegister)->PsEnable = 0;
+  LibAmdMsrWrite (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Transitions the executing core to the desired P-state.
+ *
+ *  @CpuServiceMethod{::F_CPU_TRANSITION_PSTATE}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]   StateNumber              The new P-State to make effective.
+ *  @param[in]   WaitForTransition        True if the caller wants the transition completed upon return.
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      AGESA_SUCCESS       Always Succeeds
+ */
+AGESA_STATUS
+F15TransitionPstate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8              StateNumber,
+  IN       BOOLEAN            WaitForTransition,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64       LocalMsrRegister;
+
+  LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &LocalMsrRegister, StdHeader);
+  ASSERT (((PSTATE_CURLIM_MSR *) &LocalMsrRegister)->PstateMaxVal >= StateNumber);
+  LibAmdMsrRead (MSR_PSTATE_CTL, &LocalMsrRegister, StdHeader);
+  ((PSTATE_CTRL_MSR *) &LocalMsrRegister)->PstateCmd = (UINT64) StateNumber;
+  LibAmdMsrWrite (MSR_PSTATE_CTL, &LocalMsrRegister, StdHeader);
+  if (WaitForTransition) {
+    do {
+      LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+    } while (((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate != (UINT64) StateNumber);
+  }
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Determines the rate at which the executing core's time stamp counter is
+ *  incrementing.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_TSC_RATE}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  FrequencyInMHz           TSC actual frequency.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ *  @return      The most severe status of all called services
+ */
+AGESA_STATUS
+F15GetTscRate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8        NumBoostStates;
+  UINT32       LocalPciRegister;
+  UINT64       LocalMsrRegister;
+  PCI_ADDR     PciAddress;
+  PSTATE_CPU_FAMILY_SERVICES  *FamilyServices;
+
+  LibAmdMsrRead (0xC0010015, &LocalMsrRegister, StdHeader);
+  if ((LocalMsrRegister & 0x01000000) != 0) {
+    FamilyServices = NULL;
+    GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+    ASSERT (FamilyServices != NULL);
+    OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader);
+    PciAddress.Address.Function = FUNC_4;
+    PciAddress.Address.Register = CPB_CTRL_REG;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    NumBoostStates = (UINT8) ((F15_CPB_CTRL_REGISTER *) &LocalPciRegister)->NumBoostStates;
+    return (FamilyServices->GetPstateFrequency (FamilyServices, NumBoostStates, FrequencyInMHz, StdHeader));
+  } else {
+    return (FamilySpecificServices->GetCurrentNbFrequency (FamilySpecificServices, FrequencyInMHz, StdHeader));
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initially launches the desired core to run from the reset vector.
+ *
+ * @CpuServiceMethod{::F_CPU_AP_INITIAL_LAUNCH}.
+ *
+ * @param[in]   FamilySpecificServices   The current Family Specific Services.
+ * @param[in]   SocketNum                The Processor on which the core is to be launched
+ * @param[in]   ModuleNum                The Module in that processor containing that core
+ * @param[in]   CoreNum                  The Core to launch
+ * @param[in]   PrimaryCoreNum           The id of the module's primary core.
+ * @param[in]   StdHeader                Header for library and services
+ *
+ * @retval      TRUE          The core was launched
+ * @retval      FALSE         The core was previously launched
+ */
+BOOLEAN
+F15LaunchApCore (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT32 SocketNum,
+  IN       UINT32 ModuleNum,
+  IN       UINT32 CoreNum,
+  IN       UINT32 PrimaryCoreNum,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32    NodeRelativeCoreNum;
+  UINT32    LocalPciRegister;
+  PCI_ADDR  PciAddress;
+  BOOLEAN   LaunchFlag;
+  AGESA_STATUS Ignored;
+
+  // Code Start
+  LaunchFlag = FALSE;
+  NodeRelativeCoreNum = CoreNum - PrimaryCoreNum;
+  GetPciAddress (StdHeader, SocketNum, ModuleNum, &PciAddress, &Ignored);
+  PciAddress.Address.Function = FUNC_0;
+
+  switch (NodeRelativeCoreNum) {
+  case 0:
+    PciAddress.Address.Register = HT_INIT_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & HT_INIT_CTRL_REQ_DIS) != 0) {
+      LocalPciRegister &= ~HT_INIT_CTRL_REQ_DIS;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 1:
+    PciAddress.Address.Register = CORE_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & CORE_CTRL_CORE1_EN) == 0) {
+      LocalPciRegister |= CORE_CTRL_CORE1_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 2:
+    PciAddress.Address.Register = CORE_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+    if ((LocalPciRegister & CORE_CTRL_CORE2_EN) == 0) {
+      LocalPciRegister |= CORE_CTRL_CORE2_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister,
+                      StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 3:
+    PciAddress.Address.Register = CORE_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & CORE_CTRL_CORE3_EN) == 0) {
+      LocalPciRegister |= CORE_CTRL_CORE3_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 4:
+    PciAddress.Address.Register = CORE_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & CORE_CTRL_CORE4_EN) == 0) {
+      LocalPciRegister |= CORE_CTRL_CORE4_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 5:
+    PciAddress.Address.Register = CORE_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & CORE_CTRL_CORE5_EN) == 0) {
+      LocalPciRegister |= CORE_CTRL_CORE5_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 6:
+    PciAddress.Address.Register = CORE_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & CORE_CTRL_CORE6_EN) == 0) {
+      LocalPciRegister |= CORE_CTRL_CORE6_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 7:
+    PciAddress.Address.Register = CORE_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & CORE_CTRL_CORE7_EN) == 0) {
+      LocalPciRegister |= CORE_CTRL_CORE7_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+      break;
+
+  case 8:
+    PciAddress.Address.Register = CORE_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & CORE_CTRL_CORE8_EN) == 0) {
+      LocalPciRegister |= CORE_CTRL_CORE8_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+    break;
+
+  case 9:
+    PciAddress.Address.Register = CORE_CTRL;
+    LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+    if ((LocalPciRegister & CORE_CTRL_CORE9_EN) == 0) {
+      LocalPciRegister |= CORE_CTRL_CORE9_EN;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+      LaunchFlag = TRUE;
+    } else {
+      LaunchFlag = FALSE;
+    }
+      break;
+
+  default:
+    break;
+  }
+
+  return (LaunchFlag);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provide the features of the next HT link.
+ *
+ *  @CpuServiceMethod{::F_GET_NEXT_HT_LINK_FEATURES}.
+ *
+ * This method is different than the HT Phy Features method, because for the phy registers
+ * sublink 1 matches and should be programmed if the link is ganged but for PCI config
+ * registers sublink 1 is reserved if the link is ganged.
+ *
+ * @param[in]     FamilySpecificServices    The current Family Specific Services.
+ * @param[in,out] Link                      Initially zero, each call returns the link number;
+ *                                          caller passes it back unmodified each call.
+ * @param[in,out] LinkBase                  Initially the PCI bus, device, function=0, offset=0;
+ *                                          Each call returns the HT Host Capability function and offset;
+ *                                          Caller may use it to access registers, but must @b not modify it;
+ *                                          Each new call passes the previous value as input.
+ * @param[out]    HtHostFeats               The link's features.
+ * @param[in]     StdHeader                 Standard Head Pointer
+ *
+ * @retval        TRUE                      Valid link and features found.
+ * @retval        FALSE                     No more links.
+ */
+BOOLEAN
+F15GetNextHtLinkFeatures (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   UINTN                  *Link,
+  IN OUT   PCI_ADDR               *LinkBase,
+     OUT   HT_HOST_FEATS          *HtHostFeats,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  PCI_ADDR  PciAddress;
+  UINT32    RegValue;
+  UINT32    ExtendedFreq;
+  UINTN     LinkOffset;
+  BOOLEAN   Result;
+
+  ASSERT (FamilySpecificServices != NULL);
+
+  // No features present unless link is good and connected.
+  HtHostFeats->HtHostValue = 0;
+
+  Result = TRUE;
+
+  // Find next link.
+  if (LinkBase->Address.Register == 0) {
+    // Beginning iteration now.
+    LinkBase->Address.Register = HT_CAPABILITIES_POINTER;
+    LibAmdPciReadBits (*LinkBase, 7, 0, &RegValue, StdHeader);
+  } else {
+    // Get next link offset.
+    LibAmdPciReadBits (*LinkBase, 15, 8, &RegValue, StdHeader);
+  }
+  if (RegValue == 0) {
+    // Are we at the end?  Check if we can move to another function.
+    if (LinkBase->Address.Function == 0) {
+      LinkBase->Address.Function = 4;
+      LinkBase->Address.Register = HT_CAPABILITIES_POINTER;
+      LibAmdPciReadBits (*LinkBase, 7, 0, &RegValue, StdHeader);
+    }
+  }
+
+  if (RegValue != 0) {
+    // Not at end, process the found link.
+    LinkBase->Address.Register = RegValue;
+    // Compute link number
+    *Link = (((LinkBase->Address.Function == 4) ? 4 : 0) + ((LinkBase->Address.Register - 0x80) >> 5));
+
+    // Handle pending link power off, check End of Chain, Xmit Off.
+    PciAddress = *LinkBase;
+    PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_CONTROL_REG_OFFSET;
+    LibAmdPciReadBits (PciAddress, 7, 6, &RegValue, StdHeader);
+    if (RegValue == 0) {
+      // Check coherency (HTHOST_LINK_TYPE_REG = 0x18)
+      PciAddress = *LinkBase;
+      PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_TYPE_REG_OFFSET;
+      LibAmdPciReadBits (PciAddress, 4, 0, &RegValue, StdHeader);
+      if (RegValue  == 3) {
+        HtHostFeats->HtHostFeatures.Coherent = 1;
+      } else if (RegValue == 7) {
+        HtHostFeats->HtHostFeatures.NonCoherent = 1;
+      }
+    }
+
+    // If link was not connected, don't check other attributes, make sure
+    // to return zero, no match.
+    if ((HtHostFeats->HtHostFeatures.Coherent == 1) || (HtHostFeats->HtHostFeatures.NonCoherent == 1)) {
+      // Check gen3
+      PciAddress = *LinkBase;
+      PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_EXTENDED_FREQ;
+      LibAmdPciRead (AccessWidth32, PciAddress, &ExtendedFreq, StdHeader);
+      PciAddress = *LinkBase;
+      PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_FREQ_OFFSET;
+      LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+      RegValue = (((ExtendedFreq & 0x1) << 4) | ((RegValue & 0x00000F00) >> 8));
+      if (RegValue > 6) {
+        HtHostFeats->HtHostFeatures.Ht3 = 1;
+      } else {
+        HtHostFeats->HtHostFeatures.Ht1 = 1;
+      }
+      // Check ganged. Must check the bit for sublink 0.
+      LinkOffset = (*Link > 3) ? ((*Link - 4) * 4) : (*Link * 4);
+      PciAddress = *LinkBase;
+      PciAddress.Address.Function = 0;
+      PciAddress.Address.Register = ((UINT32)LinkOffset + 0x170);
+      LibAmdPciReadBits (PciAddress, 0, 0, &RegValue, StdHeader);
+      if (RegValue == 0) {
+        HtHostFeats->HtHostFeatures.UnGanged = 1;
+      } else {
+        if (*Link < 4) {
+          HtHostFeats->HtHostFeatures.Ganged = 1;
+        } else {
+          // If this is a sublink 1 but it will be ganged, clear all features.
+          HtHostFeats->HtHostValue = 0;
+        }
+      }
+    }
+  } else {
+    // end of links.
+    Result = FALSE;
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Checks to see if the HT phy register table entry should be applied
+ *
+ * @CpuServiceMethod{::F_NEXT_LINK_HAS_HTFPY_FEATS}.
+ *
+ * Find the next link which matches, if any.
+ * This method will match for sublink 1 if the link is ganged and sublink 0 matches.
+ *
+ * @param[in]     FamilySpecificServices    The current Family Specific Services.
+ * @param[in,out] HtHostCapability Initially the PCI bus, device, function=0, offset=0;
+ *                                         Each call returns the HT Host Capability function and offset;
+ *                                         Caller may use it to access registers, but must @b not modify it;
+ *                                         Each new call passes the previous value as input.
+ * @param[in,out] Link             Initially zero, each call returns the link number; caller passes it back unmodified each call.
+ * @param[in]     HtPhyLinkType    Link type field from a register table entry to compare against
+ * @param[out]    MatchedSublink1  TRUE: It is actually just sublink 1 that matches, FALSE: any other condition.
+ * @param[out]    Frequency0       The frequency of sublink0 (200 MHz if not connected).
+ * @param[out]    Frequency1       The frequency of sublink1 (200 MHz if not connected).
+ * @param[in]     StdHeader        Standard Head Pointer
+ *
+ * @retval        TRUE             Link matches
+ * @retval        FALSE            No more links
+ *
+ */
+BOOLEAN
+F15NextLinkHasHtPhyFeats (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   PCI_ADDR           *HtHostCapability,
+  IN OUT   UINT32             *Link,
+  IN       HT_PHY_LINK_FEATS  *HtPhyLinkType,
+     OUT   BOOLEAN            *MatchedSublink1,
+     OUT   HT_FREQUENCIES     *Frequency0,
+     OUT   HT_FREQUENCIES     *Frequency1,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32    RegValue;
+  UINT32    ExtendedFreq;
+  UINT32    InternalLinks;
+  UINT32    Width;
+  PCI_ADDR  PciAddress;
+  PCI_ADDR  SubLink1Address;
+  HT_PHY_LINK_FEATS LinkType;
+  BOOLEAN   IsReallyCheckingBoth;
+  BOOLEAN   IsFound;
+  BOOLEAN   Result;
+
+  ASSERT (*Link < 4);
+  ASSERT (HtPhyLinkType != NULL);
+  // error checks: No unknown link type bits set and not a "match none"
+  ASSERT ((HtPhyLinkType->HtPhyLinkValue & ~(HTPHY_LINKTYPE_ALL | HTPHY_LINKTYPE_SL0_AND | HTPHY_LINKTYPE_SL1_AND)) == 0);
+  ASSERT (HtPhyLinkType->HtPhyLinkValue != 0);
+
+  Result = FALSE;
+  IsFound = FALSE;
+  while (!IsFound) {
+    *Frequency0 = 0;
+    *Frequency1 = 0;
+    IsReallyCheckingBoth = FALSE;
+    *MatchedSublink1 = FALSE;
+    LinkType.HtPhyLinkValue = 0;
+
+    // Find next link.
+    PciAddress = *HtHostCapability;
+    if (PciAddress.Address.Register == 0) {
+      // Beginning iteration now.
+      PciAddress.Address.Register = HT_CAPABILITIES_POINTER;
+      LibAmdPciReadBits (PciAddress, 7, 0, &RegValue, StdHeader);
+    } else {
+      // Get next link offset.
+      LibAmdPciReadBits (PciAddress, 15, 8, &RegValue, StdHeader);
+    }
+    if (RegValue != 0) {
+      HtHostCapability->Address.Register = RegValue;
+      // Compute link number of this sublink pair (so we don't need to account for function).
+      *Link = ((HtHostCapability->Address.Register - 0x80) >> 5);
+
+      // Set the link indicators.  This assumes each sublink set is contiguous, that is, links 3, 2, 1, 0 and 7, 6, 5, 4.
+      LinkType.HtPhyLinkValue |= (HTPHY_LINKTYPE_SL0_LINK0 << *Link);
+      LinkType.HtPhyLinkValue |= (HTPHY_LINKTYPE_SL1_LINK4 << *Link);
+
+      // Read IntLnkRoute from the Link Initialization Status register.
+      PciAddress = *HtHostCapability;
+      PciAddress.Address.Function = 0;
+      PciAddress.Address.Register = 0x1A0;
+      LibAmdPciReadBits (PciAddress, 23, 16, &InternalLinks, StdHeader);
+
+      // if ganged, don't read sublink 1, but use sublink 0 to check.
+      SubLink1Address = *HtHostCapability;
+
+      // Check ganged. Since we got called for sublink 0, sublink 1 is implemented also,
+      // but only access it if it is also unganged.
+      PciAddress = *HtHostCapability;
+      PciAddress.Address.Function = 0;
+      PciAddress.Address.Register = ((*Link * 4) + 0x170);
+      LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+      RegValue = (RegValue & 0x01);
+      if (RegValue == 0) {
+        // Then really read sublink1, rather than using sublink0
+        SubLink1Address.Address.Function = 4;
+        IsReallyCheckingBoth = TRUE;
+      }
+
+      // Checks for Sublink 0
+
+      // Handle pending link power off, check End of Chain, Xmit Off.
+      PciAddress = *HtHostCapability;
+      PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_CONTROL_REG_OFFSET;
+      LibAmdPciReadBits (PciAddress, 7, 6, &RegValue, StdHeader);
+      if (RegValue == 0) {
+        // Check coherency (HTHOST_LINK_TYPE_REG = 0x18)
+        PciAddress = *HtHostCapability;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_TYPE_REG_OFFSET;
+        LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+        if ((RegValue & 0x1F) == 3) {
+          LinkType.HtPhyLinkFeatures.HtPhySL0Coh = 1;
+        } else if ((RegValue & 0x1F) == 7) {
+          LinkType.HtPhyLinkFeatures.HtPhySL0NonCoh = 1;
+        }
+      }
+
+      // If link was not connected, don't check other attributes, make sure
+      // to return zero, no match. (Phy may be powered off.)
+      if ((LinkType.HtPhyLinkFeatures.HtPhySL0Coh) || (LinkType.HtPhyLinkFeatures.HtPhySL0NonCoh)) {
+        // Check gen3
+        PciAddress = *HtHostCapability;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_EXTENDED_FREQ;
+        LibAmdPciRead (AccessWidth32, PciAddress, &ExtendedFreq, StdHeader);
+        PciAddress = *HtHostCapability;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_FREQ_OFFSET;
+        LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+        RegValue = (((ExtendedFreq & 0x1) << 4) | ((RegValue & 0x00000F00) >> 8));
+        *Frequency0 = RegValue;
+        if (RegValue > 6) {
+          LinkType.HtPhyLinkFeatures.HtPhySL0Ht3 = 1;
+        } else {
+          LinkType.HtPhyLinkFeatures.HtPhySL0Ht1 = 1;
+        }
+        // Check internal / external
+        if ((InternalLinks & (1 << *Link)) == 0) {
+          // External
+          LinkType.HtPhyLinkFeatures.HtPhySL0External = 1;
+        } else {
+          // Internal
+          LinkType.HtPhyLinkFeatures.HtPhySL0Internal = 1;
+        }
+      } else {
+        LinkType.HtPhyLinkValue &= ~(HTPHY_LINKTYPE_SL0_ALL);
+      }
+
+      // Checks for Sublink 1
+      // Handle pending link power off, check End of Chain, Xmit Off.
+      // Also, if the links are ganged but the width is not 16 bits, treat it is an inactive lane.
+      PciAddress = SubLink1Address;
+      PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_CONTROL_REG_OFFSET;
+      LibAmdPciReadBits (PciAddress, 7, 6, &RegValue, StdHeader);
+      LibAmdPciReadBits (PciAddress, 31, 24, &Width, StdHeader);
+      if ((RegValue == 0) && (IsReallyCheckingBoth || (Width == 0x11))) {
+        // Check coherency (HTHOST_LINK_TYPE_REG = 0x18)
+        PciAddress = SubLink1Address;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_TYPE_REG_OFFSET;
+        LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+        if ((RegValue & 0x1F) == 3) {
+          LinkType.HtPhyLinkFeatures.HtPhySL1Coh = 1;
+        } else if ((RegValue & 0x1F) == 7) {
+          LinkType.HtPhyLinkFeatures.HtPhySL1NonCoh = 1;
+        }
+      }
+
+      if ((LinkType.HtPhyLinkFeatures.HtPhySL1Coh) || (LinkType.HtPhyLinkFeatures.HtPhySL1NonCoh)) {
+        // Check gen3
+        PciAddress = SubLink1Address;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_EXTENDED_FREQ;
+        LibAmdPciRead (AccessWidth32, PciAddress, &ExtendedFreq, StdHeader);
+        PciAddress = SubLink1Address;
+        PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_FREQ_OFFSET;
+        LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+        RegValue = (((ExtendedFreq & 0x1) << 4) | ((RegValue & 0x00000F00) >> 8));
+        *Frequency1 = RegValue;
+        if (RegValue > 6) {
+          LinkType.HtPhyLinkFeatures.HtPhySL1Ht3 = 1;
+        } else {
+          LinkType.HtPhyLinkFeatures.HtPhySL1Ht1 = 1;
+        }
+        // Check internal / external.  Note that we do really check sublink 1 regardless of ganging.
+        if ((InternalLinks & (1 << (*Link + 4))) == 0) {
+          // External
+          LinkType.HtPhyLinkFeatures.HtPhySL1External = 1;
+        } else {
+          // Internal
+          LinkType.HtPhyLinkFeatures.HtPhySL1Internal = 1;
+        }
+      } else {
+        LinkType.HtPhyLinkValue &= ~(HTPHY_LINKTYPE_SL1_ALL);
+      }
+
+      // Determine if the link matches the entry criteria.
+      // For Deemphasis checking, indicate whether it was actually sublink 1 that matched.
+      // If the link is ganged or only sublink 0 matched, or the link features didn't match, this is false.
+      if (((HtPhyLinkType->HtPhyLinkValue & HTPHY_LINKTYPE_SL0_AND) == 0) &&
+          ((HtPhyLinkType->HtPhyLinkValue & HTPHY_LINKTYPE_SL1_AND) == 0)) {
+        // Match if any feature matches (OR)
+        Result = (BOOLEAN) ((LinkType.HtPhyLinkValue & HtPhyLinkType->HtPhyLinkValue) != 0);
+      } else {
+        // Match if all features match (AND)
+        Result = (BOOLEAN) ((HtPhyLinkType->HtPhyLinkValue & ~(HTPHY_LINKTYPE_SL0_AND | HTPHY_LINKTYPE_SL1_AND)) ==
+                           (LinkType.HtPhyLinkValue & HtPhyLinkType->HtPhyLinkValue));
+      }
+      if (Result) {
+        if (IsReallyCheckingBoth &&
+            (((LinkType.HtPhyLinkValue & HtPhyLinkType->HtPhyLinkValue) & (HTPHY_LINKTYPE_SL1_ALL)) != 0)) {
+          *MatchedSublink1 = TRUE;
+        }
+        IsFound = TRUE;
+      } else {
+        // Go to next link
+      }
+    } else {
+      // No more links
+      IsFound = TRUE;
+    }
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Applies an HT Phy read-modify-write based on an HT Phy register table entry.
+ *
+ * @CpuServiceMethod{::F_SET_HT_PHY_REGISTER}.
+ *
+ * This function performs the necessary sequence of PCI reads, writes, and waits
+ * necessary to program an HT Phy register.
+ *
+ * @param[in]  FamilySpecificServices    The current Family Specific Services.
+ * @param[in]  HtPhyEntry    HT Phy register table entry to apply
+ * @param[in]  CapabilitySet The link's HT Host base address.
+ * @param[in]  Link          Zero based, node, link number (not package link).
+ * @param[in]  StdHeader     Config handle for library and services
+ *
+ */
+VOID
+F15SetHtPhyRegister (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       HT_PHY_TYPE_ENTRY_DATA  *HtPhyEntry,
+  IN       PCI_ADDR                 CapabilitySet,
+  IN       UINT32                   Link,
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  )
+{
+  UINT32    Temp;
+  UINT32    PhyReg;
+  PCI_ADDR  PhyBase;
+
+  // Determine the PCI config address of the HT Phy portal
+  PhyBase = CapabilitySet;
+  PhyBase.Address.Function = FUNC_4;
+  PhyBase.Address.Register = ((Link << 3) + REG_HT4_PHY_OFFSET_BASE_4X180);
+
+  LibAmdPciRead (AccessWidth32, PhyBase, &PhyReg, StdHeader);
+
+  // Handle direct map registers if needed
+  PhyReg &= ~(HTPHY_DIRECT_OFFSET_MASK);
+  if ((HtPhyEntry->Address > 0x3FF) || ((HtPhyEntry->Address >= 0xE) && (HtPhyEntry->Address <= 0x11))) {
+    PhyReg |= HTPHY_DIRECT_MAP;
+  }
+
+  PhyReg |= (HtPhyEntry->Address);
+  // Ask the portal to read the HT Phy Register contents
+  LibAmdPciWrite (AccessWidth32, PhyBase, &PhyReg, StdHeader);
+  do
+  {
+    LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader);
+  } while (!(Temp & HTPHY_IS_COMPLETE_MASK));
+
+  // Get the current register contents and do the update requested by the table
+  PhyBase.AddressValue += 4;
+  LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader);
+  Temp &= ~(HtPhyEntry->Mask);
+  Temp |= (HtPhyEntry->Data);
+  LibAmdPciWrite (AccessWidth32, PhyBase, &Temp, StdHeader);
+
+  PhyBase.AddressValue -= 4;
+  // Ask the portal to write our updated value to the HT Phy
+  PhyReg |= HTPHY_WRITE_CMD;
+  LibAmdPciWrite (AccessWidth32, PhyBase, &PhyReg, StdHeader);
+  do
+  {
+    LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader);
+  } while (!(Temp & HTPHY_IS_COMPLETE_MASK));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Applies an HT Phy write to a specified Phy register.
+ *
+ * @CpuServiceMethod{::F_SET_HT_PHY_REGISTER}.
+ *
+ * The caller is responsible for performing any read and modify steps.
+ * This function performs the necessary sequence of PCI reads, writes, and waits
+ * necessary to program an HT Phy register.
+ *
+ * @param[in]  CapabilitySet The link's HT Host base address.
+ * @param[in]  Link          Zero based, node, link number (not package link).
+ * @param[in]  Address       The HT Phy register address
+ * @param[in]  Data          The data to write to the register
+ * @param[in]  StdHeader     Config handle for library and services
+ *
+ */
+VOID
+STATIC
+F15WriteOnlyHtPhyRegister (
+  IN       PCI_ADDR                 CapabilitySet,
+  IN       UINT32                   Link,
+  IN       UINT32                   Address,
+  IN       UINT32                   Data,
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  )
+{
+  UINT32    Temp;
+  UINT32    PhyReg;
+  PCI_ADDR  PhyBase;
+
+  // Determine the PCI config address of the HT Phy portal
+  PhyBase = CapabilitySet;
+  PhyBase.Address.Function = FUNC_4;
+  PhyBase.Address.Register = ((Link << 3) + REG_HT4_PHY_OFFSET_BASE_4X180);
+
+  LibAmdPciRead (AccessWidth32, PhyBase, &PhyReg, StdHeader);
+
+  // Handle direct map registers if needed
+  PhyReg &= ~(HTPHY_DIRECT_OFFSET_MASK);
+  if ((Address > 0x3FF) || ((Address >= 0xE) && (Address <= 0x11))) {
+    PhyReg |= HTPHY_DIRECT_MAP;
+  }
+
+  PhyReg |= (Address);
+
+  // Get the current register contents and do the update requested by the table
+  PhyBase.AddressValue += 4;
+  LibAmdPciWrite (AccessWidth32, PhyBase, &Data, StdHeader);
+
+  PhyBase.AddressValue -= 4;
+  // Ask the portal to write our updated value to the HT Phy
+  PhyReg |= HTPHY_WRITE_CMD;
+  LibAmdPciWrite (AccessWidth32, PhyBase, &PhyReg, StdHeader);
+  do
+  {
+    LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader);
+  } while (!(Temp & HTPHY_IS_COMPLETE_MASK));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the value of an HT PHY register.
+ *
+ * Reading HT Phy registers is not generally useful, because they return the effective value,
+ * not the currently written value.  So be warned, this function is dangerous if used to read
+ * a register that will be udpated subsequently elsewhere.
+ *
+ * This routine is useful for reading hardware status from the HT Phy that can be used to set
+ * other phy registers.
+ *
+ * @param[in]  CapabilitySet The link's HT Host base address.
+ * @param[in]  Link          Zero based, node link number (not package link).
+ * @param[in]  Address       The HT Phy register address to read
+ * @param[in]  StdHeader     Config handle for library and services
+ *
+ * @return     The register content (in most cases, the effective content not the pending content)
+ *
+ */
+UINT32
+STATIC
+F15GetHtPhyRegister (
+  IN       PCI_ADDR                 CapabilitySet,
+  IN       UINT32                   Link,
+  IN       UINT32                   Address,
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  )
+{
+  UINT32    Temp;
+  UINT32    PhyReg;
+  PCI_ADDR  PhyBase;
+
+  // Determine the PCI config address of the HT Phy portal
+  PhyBase = CapabilitySet;
+  PhyBase.Address.Function = FUNC_4;
+  PhyBase.Address.Register = ((Link << 3) + REG_HT4_PHY_OFFSET_BASE_4X180);
+
+  LibAmdPciRead (AccessWidth32, PhyBase, &PhyReg, StdHeader);
+
+  // Handle direct map registers if needed
+  PhyReg &= ~(HTPHY_DIRECT_OFFSET_MASK);
+  if ((Address > 0x3FF) || ((Address >= 0xE) && (Address <= 0x11))) {
+    PhyReg |= HTPHY_DIRECT_MAP;
+  }
+
+  PhyReg |= Address;
+  // Ask the portal to read the HT Phy Register contents
+  LibAmdPciWrite (AccessWidth32, PhyBase, &PhyReg, StdHeader);
+  do
+  {
+    LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader);
+  } while (!(Temp & HTPHY_IS_COMPLETE_MASK));
+
+  // Get the current register contents
+  PhyBase.AddressValue += 4;
+  LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader);
+
+  return Temp;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * A Family Specific Workaround method, to override HT DLL Compensation.
+ *
+ * \@TableTypeFamSpecificInstances.
+ *
+ * The Link Product Information register can be fused to contain an HT PHY DLL Compensation Override table.
+ * Based on link frequency, a compensation override can be selected from the value.
+ * To accomodate individual link differences in the package, each link can also have a DLL process compensation
+ * value set.  This value can apply an adjustment to the compensation value.
+ *
+ * @param[in]     Data       The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in]     StdHeader  Config params for library, services.
+ */
+VOID
+F15HtPhyOverrideDllCompensation (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT32                ProductLinkInfo;
+  UINT32                Link;
+  CPU_LOGICAL_ID        CpuFamilyRevision;
+  PCI_ADDR              StartingCapabilitySet;
+  PCI_ADDR              CapabilitySet;
+  PCI_ADDR              PciAddress;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  BOOLEAN               MatchedSublink1;
+  HT_FREQUENCIES        Freq0;
+  HT_FREQUENCIES        Freq1;
+  UINTN                 Sublink;
+  HT_PHY_LINK_FEATS     DesiredLinkFeats;
+  BOOLEAN               IsEarlyRevProcessor;
+  BOOLEAN               IsHardwareReportingComp;
+  UINTN                 LinkFrequency;
+  UINT32                Compensation;
+  UINT32                Adjustment;
+  BOOLEAN               IsIncrementAdjust;
+  LINK_PHY_RECEIVER_PROCESS_FUSE_CONTROL LinkPhyReceiverProcessFuseControl;
+  LINK_PHY_RECEIVER_PROCESS_DLL_CONTROL  LinkPhyReceiverProcessDllControl;
+
+  OptionMultiSocketConfiguration.GetCurrPciAddr (&StartingCapabilitySet, StdHeader);
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  GetCpuServicesFromLogicalId (&CpuFamilyRevision, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+  // Check if the hardware reported any compensation values.
+  IsEarlyRevProcessor = (BOOLEAN) ((Data == 0) ? TRUE : FALSE);
+  PciAddress = StartingCapabilitySet;
+  PciAddress.Address.Function = FUNC_5;
+  PciAddress.Address.Register = 0x190;
+  LibAmdPciRead (AccessWidth32, PciAddress, &ProductLinkInfo, StdHeader);
+  IsHardwareReportingComp = (BOOLEAN) (ProductLinkInfo != 0);
+
+  if (!IsEarlyRevProcessor || IsHardwareReportingComp) {
+    // Process all the sublink 0's and then all the sublink 1's that are at HT3 frequency.
+    for (Sublink = 0; Sublink < 2; Sublink++) {
+      CapabilitySet = StartingCapabilitySet;
+      Link = 0;
+      DesiredLinkFeats.HtPhyLinkValue = ((Sublink == 0) ? HTPHY_LINKTYPE_SL0_HT3 : HTPHY_LINKTYPE_SL0_HT3);
+      while (FamilySpecificServices->NextLinkHasHtPhyFeats (
+               FamilySpecificServices,
+               &CapabilitySet,
+               &Link,
+               &DesiredLinkFeats,
+               &MatchedSublink1,
+               &Freq0,
+               &Freq1,
+               StdHeader)) {
+
+        // Look up compensation value.  Remember that we matched links which are at HT3 frequency, so Freq[1,0]
+        // should safely be greater than or equal to 1.2 GHz.
+        if (Sublink == 0) {
+          LinkFrequency = Freq0 - HT_FREQUENCY_1200M;
+        } else {
+          LinkFrequency = (MatchedSublink1 ? Freq1 : Freq0) - HT_FREQUENCY_1200M;
+        }
+        // This assert would catch frequencies higher than we know how to support, or any table overrun bug.
+        ASSERT (LinkFrequency < (sizeof (HtPhyDllCompLookupTable) / sizeof (HT_PHY_DLL_COMP_LOOKUP_TABLE)));
+        // Since there are invalid entries in the table, for frequency enum skipped values, ensure we did not
+        // pick one of those entries.  This should be impossible from real hardware.
+        ASSERT (HtPhyDllCompLookupTable[LinkFrequency].DefaultComp != 0xFFFFFFFFul);
+
+        if (IsHardwareReportingComp) {
+          LibAmdPciReadBits (
+            PciAddress,
+            HtPhyDllCompLookupTable[LinkFrequency].CtlIndexHiBit,
+            HtPhyDllCompLookupTable[LinkFrequency].CtlIndexLoBit,
+            &Compensation,
+            StdHeader);
+        } else {
+          Compensation = HtPhyDllCompLookupTable[LinkFrequency].DefaultComp;
+        }
+
+        // Apply any per PHY adjustment
+        LinkPhyReceiverProcessFuseControl.Value = F15GetHtPhyRegister (
+          CapabilitySet,
+          Link,
+          ((Sublink == 0) ? HT_PHY_FUSE_PROC_DLL_PROCESS_COMP_RD_SL0 : HT_PHY_FUSE_PROC_DLL_PROCESS_COMP_RD_SL1),
+          StdHeader);
+        Adjustment = LinkPhyReceiverProcessFuseControl.Fields.DllProcessComp10;
+        IsIncrementAdjust = (BOOLEAN) ((LinkPhyReceiverProcessFuseControl.Fields.DllProcessComp2 == 0) ? TRUE : FALSE);
+        if (IsIncrementAdjust) {
+          Compensation = (((Compensation + Adjustment) > 0x000F) ? 0x000F : (Compensation + Adjustment));
+        } else {
+          // decrement adjustment
+          Compensation = ((Compensation < Adjustment) ? 0 : (Compensation - Adjustment));
+        }
+
+        // Update the DLL Compensation
+        LinkPhyReceiverProcessDllControl.Value = F15GetHtPhyRegister (
+          CapabilitySet,
+          Link,
+          HT_PHY_LINK_PHY_RECEIVER_PROCESS_DLL_CONTROL_RD,
+          StdHeader);
+        LinkPhyReceiverProcessDllControl.Fields.DllProcessFreqCtlOverride = 1;
+        LinkPhyReceiverProcessDllControl.Fields.DllProcessFreqCtlIndex2 = Compensation;
+        F15WriteOnlyHtPhyRegister (
+          CapabilitySet,
+          Link,
+          ((Sublink == 0) ? HT_PHY_LINK_PHY_RECEIVER_PROCESS_DLL_CONTROL_SL0 : HT_PHY_LINK_PHY_RECEIVER_PROCESS_DLL_CONTROL_SL1),
+          LinkPhyReceiverProcessDllControl.Value,
+          StdHeader);
+      }
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns whether or not BIOS is responsible for configuring the NB COFVID.
+ *
+ *  @CpuServiceMethod{::F_CPU_IS_NBCOF_INIT_NEEDED}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[in]   PciAddress               The northbridge to query by pci base address.
+ *  @param[out]  NbVidUpdateAll           Do all NbVids need to be updated
+ *  @param[in]   StdHeader                Header for library and services
+ *
+ *  @retval      TRUE                    Perform northbridge frequency and voltage config.
+ *  @retval      FALSE                   Do not configure them.
+ */
+BOOLEAN
+F15CommonGetNbCofVidUpdate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       PCI_ADDR *PciAddress,
+     OUT   BOOLEAN *NbVidUpdateAll,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NbVidUpdateAll = FALSE;
+  return FALSE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is the Northbridge PState feature enabled?
+ *
+ * @CpuServiceMethod{::F_IS_NB_PSTATE_ENABLED}.
+ *
+ * @param[in]      FamilySpecificServices         The current Family Specific Services.
+ * @param[in]      PlatformConfig                 Platform profile/build option config structure.
+ * @param[in]      StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ * @retval         TRUE                           The NB PState feature is enabled.
+ * @retval         FALSE                          The NB PState feature is not enabled.
+ */
+BOOLEAN
+F15IsNbPstateEnabled (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32   LocalPciRegister;
+  PCI_ADDR PciAddress;
+  BOOLEAN  PowerMode;
+  BOOLEAN  SkipHwCfg;
+
+  SkipHwCfg = FALSE;
+
+  IDS_OPTION_HOOK (IDS_NBPSDIS_OVERRIDE, &SkipHwCfg, StdHeader);
+
+  // Defaults to Power Optimized Mode
+  PowerMode = TRUE;
+
+  // If system is optimized for performance, disable NB P-States
+  if (PlatformConfig->PlatformProfile.PlatformPowerPolicy == Performance) {
+    PowerMode = FALSE;
+  }
+
+  PciAddress.AddressValue = F15_NB_PSTATE_CTRL_PCI_ADDR;
+  LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+  if ((((((F15_NB_PSTATE_CTRL_REGISTER *) &LocalPciRegister)->NbPstateMaxVal != 0) &&
+      (!IsNonCoherentHt1 (StdHeader))) || SkipHwCfg) && (PowerMode)) {
+    return TRUE;
+  }
+  return FALSE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Utilities.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Utilities.h
new file mode 100644
index 0000000000..e4210373b4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15Utilities.h
@@ -0,0 +1,160 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 15h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F15_UTILITES_H_
+#define _CPU_F15_UTILITES_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// The structure for Software Initiated NB Voltage Transitions
+typedef struct {
+  UINT32  VidCode;          ///< VID code to transition to
+  BOOLEAN SlamMode;         ///< Whether voltage is to be slammed, or stepped
+} SW_VOLT_TRANS_NB;
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+F15DisablePstate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8 StateNumber,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+F15TransitionPstate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8              StateNumber,
+  IN       BOOLEAN            WaitForTransition,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+F15GetTscRate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   UINT32 *FrequencyInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+F15LaunchApCore (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT32 SocketNum,
+  IN       UINT32 ModuleNum,
+  IN       UINT32 CoreNum,
+  IN       UINT32 PrimaryCoreNum,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+F15HtPhyOverrideDllCompensation (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+BOOLEAN
+F15GetNextHtLinkFeatures (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   UINTN                  *Link,
+  IN OUT   PCI_ADDR               *LinkBase,
+     OUT   HT_HOST_FEATS          *HtHostFeats,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+BOOLEAN
+F15NextLinkHasHtPhyFeats (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   PCI_ADDR           *HtHostCapability,
+  IN OUT   UINT32             *Link,
+  IN       HT_PHY_LINK_FEATS  *HtPhyLinkType,
+     OUT   BOOLEAN            *MatchedSublink1,
+     OUT   HT_FREQUENCIES     *Frequency0,
+     OUT   HT_FREQUENCIES     *Frequency1,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+F15SetHtPhyRegister (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       HT_PHY_TYPE_ENTRY_DATA  *HtPhyEntry,
+  IN       PCI_ADDR                 CapabilitySet,
+  IN       UINT32                   Link,
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  );
+
+BOOLEAN
+F15CommonGetNbCofVidUpdate (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       PCI_ADDR *PciAddress,
+     OUT   BOOLEAN *NbVidUpdateAll,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+F15IsNbPstateEnabled (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+#endif  // _CPU_F15_UTILITES_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15WheaInitDataTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15WheaInitDataTables.c
new file mode 100644
index 0000000000..d969d66ab2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x15/cpuF15WheaInitDataTables.c
@@ -0,0 +1,128 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_15 WHEA initial Data
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Family/0x15
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuLateInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X15_CPUF15WHEAINITDATATABLES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF15WheaInitData (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **F15WheaInitDataPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AMD_HEST_BANK_INIT_DATA F15HestBankInitData[] = {
+  {0xFFFFFFFF,0xFFFFFFFF,0x400,0x401,0x402,0x403},
+  {0xFFFFFFFF,0xFFFFFFFF,0x404,0x405,0x406,0x407},
+  {0xFFFFFFFF,0xFFFFFFFF,0x408,0x409,0x40A,0x40B},
+  {0xFFFFFFFF,0xFFFFFFFF,0x410,0x411,0x412,0x413},
+  {0xFFFFFFFF,0xFFFFFFFF,0x414,0x415,0x416,0x417},
+  {0xFFFFFFFF,0xFFFFFFFF,0x418,0x419,0x41A,0x41B},
+};
+
+AMD_WHEA_INIT_DATA F15WheaInitData = {
+  0x000000000,              // AmdGlobCapInitDataLsd
+  0x000000000,              // AmdGlobCapInitDataMsd
+  0x000000077,              // AmdGlobCtrlInitDataLsd
+  0x000000000,              // AmdGlobCtrlInitDataMsd
+  0x00,                     // AmdMcbClrStatusOnInit
+  0x02,                     // AmdMcbStatusDataFormat
+  0x00,                     // AmdMcbConfWriteEn
+  (sizeof (F15HestBankInitData) / sizeof (F15HestBankInitData[0])), // HestBankNum
+  &F15HestBankInitData[0]   // Pointer to Initial data of HEST Bank
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns the family specific WHEA table properties.
+ *
+ *  @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ *  @param[in]   FamilySpecificServices   The current Family Specific Services.
+ *  @param[out]  F15WheaInitDataPtr       Points to the family 15h WHEA properties.
+ *  @param[out]  NumberOfElements         Will be one to indicate one structure.
+ *  @param[in]   StdHeader                Header for library and services.
+ *
+ */
+VOID
+GetF15WheaInitData (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+     OUT   CONST VOID **F15WheaInitDataPtr,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = 1;
+  *F15WheaInitDataPtr = &F15WheaInitData;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/cpuFamRegisters.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/cpuFamRegisters.h
new file mode 100644
index 0000000000..4800a23895
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/cpuFamRegisters.h
@@ -0,0 +1,259 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Register Table Related Functions
+ *
+ * Contains the definition of the CPU CPUID MSRs and PCI registers with BKDG recommended values
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 57647 $   @e \$Date: 2011-08-08 14:56:33 -0600 (Mon, 08 Aug 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_FAM_REGISTERS_H_
+#define _CPU_FAM_REGISTERS_H_
+
+/*
+ *--------------------------------------------------------------
+ *
+ *                      M O D U L E S    U S E D
+ *
+ *---------------------------------------------------------------
+ */
+
+/*
+ *--------------------------------------------------------------
+ *
+ *                      D E F I N I T I O N S  /  M A C R O S
+ *
+ *---------------------------------------------------------------
+ */
+
+// This define should be equal to the total number of families
+// in the cpuFamily enum.
+#define MAX_CPU_FAMILIES    64
+#define MAX_CPU_REVISIONS   63    // Max Cpu Revisions Per Family
+
+// CPU_LOGICAL_ID.Family equates
+// Family 10h equates
+#define AMD_FAMILY_10_RB  0x0000000000000001
+#define AMD_FAMILY_10_BL  0x0000000000000002
+#define AMD_FAMILY_10_DA  0x0000000000000004
+#define AMD_FAMILY_10_HY  0x0000000000000008
+#define AMD_FAMILY_10_PH  0x0000000000000010
+#define AMD_FAMILY_10_C32 AMD_FAMILY_10_HY
+
+#define AMD_FAMILY_10 (AMD_FAMILY_10_RB | AMD_FAMILY_10_BL | AMD_FAMILY_10_DA | AMD_FAMILY_10_HY | AMD_FAMILY_10_PH)
+#define AMD_FAMILY_GH    (AMD_FAMILY_10)
+
+// Family 12h equates
+#define AMD_FAMILY_12_LN  0x0000000000000020
+#define AMD_FAMILY_12     (AMD_FAMILY_12_LN)
+#define AMD_FAMILY_LN     (AMD_FAMILY_12_LN)
+
+// Family 14h equates
+#define AMD_FAMILY_14_ON  0x0000000000000040
+#define AMD_FAMILY_ON     (AMD_FAMILY_14_ON)
+#define AMD_FAMILY_14_KR  0x0000000000000080
+#define AMD_FAMILY_KR     (AMD_FAMILY_14_KR)
+#define AMD_FAMILY_14     (AMD_FAMILY_14_ON | AMD_FAMILY_14_KR)
+
+// Family 15h equates
+#define AMD_FAMILY_15_OR  0x0000000000000100
+#define AMD_FAMILY_OR     (AMD_FAMILY_15_OR)
+#define AMD_FAMILY_15_TN  0x0000000000000200
+#define AMD_FAMILY_TN     (AMD_FAMILY_15_TN)
+#define AMD_FAMILY_15_KM  0x0000000000000400
+#define AMD_FAMILY_KM     (AMD_FAMILY_15_KM)
+#define AMD_FAMILY_15     (AMD_FAMILY_15_OR | AMD_FAMILY_15_TN | AMD_FAMILY_15_KM)
+
+// Family 16h equates
+#define AMD_FAMILY_16     0x0000000000000800
+#define AMD_FAMILY_WF     (AMD_FAMILY_16)
+
+// Family Unknown
+#define AMD_FAMILY_UNKNOWN 0x8000000000000000
+
+// Family Group equates
+#define AMD_FAMILY_GE_12   (AMD_FAMILY_12 | AMD_FAMILY_14 | AMD_FAMILY_15 | AMD_FAMILY_16)
+
+// Family 10h CPU_LOGICAL_ID.Revision equates
+// -------------------------------------
+  // Family 10h RB steppings
+#define AMD_F10_RB_C0      0x0000000000000001
+#define AMD_F10_RB_C1      0x0000000000000002
+#define AMD_F10_RB_C2      0x0000000000000004
+#define AMD_F10_RB_C3      0x0000000000000008
+  // Family 10h BL steppings
+#define AMD_F10_BL_C2      0x0000000000000010
+#define AMD_F10_BL_C3      0x0000000000000020
+  // Family 10h DA steppings
+#define AMD_F10_DA_C2      0x0000000000000040
+#define AMD_F10_DA_C3      0x0000000000000080
+  // Family 10h HY SCM steppings
+#define AMD_F10_HY_SCM_D0  0x0000000000000100
+#define AMD_F10_HY_SCM_D1  0x0000000000000400
+  // Family 10h HY MCM steppings
+#define AMD_F10_HY_MCM_D0  0x0000000000000200
+#define AMD_F10_HY_MCM_D1  0x0000000000000800
+  // Family 10h PH steppings
+#define AMD_F10_PH_E0      0x0000000000001000
+  // Family 10h Unknown stepping
+  // * This equate is used to ensure that unknown CPU revisions are       *
+  // * identified as the last known revision of the silicon family:       *
+  // * - Update AMD_F10_UNKNOWN whenever newer F10h steppings are added   *
+#define AMD_F10_UNKNOWN    (AMD_FAMILY_UNKNOWN | AMD_F10_C3 | AMD_F10_D1 | AMD_F10_PH_E0)
+
+  // Family 10h Miscellaneous equates
+#define AMD_F10_C0 (AMD_F10_RB_C0)
+#define AMD_F10_C1 (AMD_F10_RB_C1)
+#define AMD_F10_C2 (AMD_F10_RB_C2 | AMD_F10_DA_C2 | AMD_F10_BL_C2)
+#define AMD_F10_C3 (AMD_F10_RB_C3 | AMD_F10_DA_C3 | AMD_F10_BL_C3)
+#define AMD_F10_Cx (AMD_F10_C0 | AMD_F10_C1 | AMD_F10_C2 | AMD_F10_C3)
+
+#define AMD_F10_RB_ALL (AMD_F10_RB_C0 | AMD_F10_RB_C1 | AMD_F10_RB_C2 | AMD_F10_RB_C3)
+
+#define AMD_F10_BL_ALL (AMD_F10_BL_C2 | AMD_F10_BL_C3)
+#define AMD_F10_BL_Cx  (AMD_F10_BL_C2 | AMD_F10_BL_C3)
+
+#define AMD_F10_DA_ALL (AMD_F10_DA_C2 | AMD_F10_DA_C3)
+#define AMD_F10_DA_Cx  (AMD_F10_DA_C2 | AMD_F10_DA_C3)
+
+#define AMD_F10_D0 (AMD_F10_HY_SCM_D0 | AMD_F10_HY_MCM_D0)
+#define AMD_F10_D1 (AMD_F10_HY_SCM_D1 | AMD_F10_HY_MCM_D1)
+#define AMD_F10_Dx (AMD_F10_D0 | AMD_F10_D1)
+
+#define AMD_F10_PH_ALL (AMD_F10_PH_E0)
+#define AMD_F10_Ex (AMD_F10_PH_E0)
+
+#define AMD_F10_HY_ALL (AMD_F10_Dx)
+#define AMD_F10_C32_ALL (AMD_F10_HY_SCM_D0 | AMD_F10_HY_SCM_D1)
+
+#define AMD_F10_GT_B0 (AMD_F10_Cx | AMD_F10_Dx | AMD_F10_Ex)
+#define AMD_F10_GT_Bx (AMD_F10_Cx | AMD_F10_Dx | AMD_F10_Ex)
+#define AMD_F10_GT_A2 (AMD_F10_Cx | AMD_F10_Dx | AMD_F10_Ex)
+#define AMD_F10_GT_Ax (AMD_F10_Cx | AMD_F10_Dx | AMD_F10_Ex)
+#define AMD_F10_GT_C0 ((AMD_F10_Cx & ~AMD_F10_C0) | AMD_F10_Dx | AMD_F10_Ex)
+#define AMD_F10_GT_D0 ((AMD_F10_Dx & ~AMD_F10_D0) | AMD_F10_Ex)
+
+#define AMD_F10_ALL (AMD_F10_Cx | AMD_F10_Dx  | AMD_F10_Ex)
+
+// Family 12h CPU_LOGICAL_ID.Revision equates
+// -------------------------------------
+
+  // Family 12h LN steppings
+#define AMD_F12_LN_A0    0x0000000000000001
+#define AMD_F12_LN_A1    0x0000000000000002
+#define AMD_F12_LN_B0    0x0000000000000004
+  // Family 12h Unknown stepping
+  // * This equate is used to ensure that unknown CPU revisions are       *
+  // * identified as the last known revision of the silicon family:       *
+  // * - Update AMD_F12_UNKNOWN whenever newer F12h steppings are added   *
+#define AMD_F12_UNKNOWN  (AMD_FAMILY_UNKNOWN | AMD_F12_LN_B0)
+
+#define AMD_F12_LN_Ax    (AMD_F12_LN_A0 | AMD_F12_LN_A1)
+#define AMD_F12_LN_Bx    (AMD_F12_LN_B0)
+
+#define AMD_F12_ALL      (AMD_F12_LN_Ax | AMD_F12_LN_Bx)
+
+// Family 14h CPU_LOGICAL_ID.Revision equates
+// -------------------------------------
+
+  // Family 14h ON steppings
+#define AMD_F14_ON_A0    0x0000000000000001
+#define AMD_F14_ON_A1    0x0000000000000002
+#define AMD_F14_ON_B0    0x0000000000000004
+#define AMD_F14_ON_C0    0x0000000000000008
+  // Family 14h KR steppings
+#define AMD_F14_KR_A0    0x0000000000000100
+#define AMD_F14_KR_A1    0x0000000000000200
+#define AMD_F14_KR_B0    0x0000000000000400
+  // Family 14h Unknown stepping
+  // * This equate is used to ensure that unknown CPU revisions are       *
+  // * identified as the last known revision of the silicon family:       *
+  // * - Update AMD_F14_UNKNOWN whenever newer F14h steppings are added   *
+#define AMD_F14_UNKNOWN  (AMD_FAMILY_UNKNOWN | AMD_F14_KR_B0 | AMD_F14_ON_C0)
+
+#define AMD_F14_ON_Ax    (AMD_F14_ON_A0 | AMD_F14_ON_A1)
+#define AMD_F14_ON_Bx    (AMD_F14_ON_B0)
+#define AMD_F14_ON_Cx    (AMD_F14_ON_C0)
+#define AMD_F14_ON_ALL   (AMD_F14_ON_Ax | AMD_F14_ON_Bx | AMD_F14_ON_Cx)
+
+#define AMD_F14_KR_Ax    (AMD_F14_KR_A0 | AMD_F14_KR_A1)
+#define AMD_F14_KR_Bx    AMD_F14_KR_B0
+#define AMD_F14_KR_ALL   (AMD_F14_KR_Ax | AMD_F14_KR_Bx)
+
+#define AMD_F14_ALL      (AMD_F14_ON_ALL | AMD_F14_KR_ALL)
+
+// Family 15h CPU_LOGICAL_ID.Revision equates
+// -------------------------------------
+
+  // Family 15h OROCHI steppings
+#define AMD_F15_OR_A0    0x0000000000000001
+#define AMD_F15_OR_A1    0x0000000000000002
+#define AMD_F15_OR_B0    0x0000000000000004
+#define AMD_F15_OR_B1    0x0000000000000008
+#define AMD_F15_OR_B2    0x0000000000000010
+  // Family 15h TN steppings
+#define AMD_F15_TN_A0    0x0000000000000100
+  // Family 15h KM steppings
+#define AMD_F15_KM_A0    0x0000000000010000
+#define AMD_F15_KM_A1    0x0000000000020000
+  // Family 15h Unknown stepping
+  // * This equate is used to ensure that unknown CPU revisions are       *
+  // * identified as the last known revision of the silicon family:       *
+  // * - Update AMD_F15_UNKNOWN whenever newer F15h steppings are added   *
+#define AMD_F15_UNKNOWN  (AMD_FAMILY_UNKNOWN | AMD_F15_OR_B2 | AMD_F15_TN_A0 | AMD_F15_KM_A1)
+
+#define AMD_F15_OR_Ax    (AMD_F15_OR_A0 | AMD_F15_OR_A1)
+#define AMD_F15_OR_Bx    (AMD_F15_OR_B0 | AMD_F15_OR_B1 | AMD_F15_OR_B2)
+#define AMD_F15_OR_GT_Ax (AMD_F15_OR_Bx)
+#define AMD_F15_OR_LT_B1 (AMD_F15_OR_Ax | AMD_F15_OR_B0)
+#define AMD_F15_OR_ALL   (AMD_F15_OR_Ax | AMD_F15_OR_Bx)
+
+#define AMD_F15_TN_Ax    (AMD_F15_TN_A0)
+#define AMD_F15_TN_ALL   (AMD_F15_TN_Ax)
+
+#define AMD_F15_KM_Ax    (AMD_F15_KM_A0 | AMD_F15_KM_A1)
+#define AMD_F15_KM_ALL   (AMD_F15_KM_Ax)
+
+#define AMD_F15_ALL      (AMD_F15_OR_ALL | AMD_F15_TN_ALL | AMD_F15_KM_ALL)
+
+// Family 16h CPU_LOGICAL_ID.Revision equates
+// TBD
+
+#endif      // _CPU_FAM_REGISTERS_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/PreserveMailbox.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/PreserveMailbox.c
new file mode 100644
index 0000000000..c8e7c3aa20
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/PreserveMailbox.c
@@ -0,0 +1,219 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Preserve Registers used for AP Mailbox.
+ *
+ * Save and Restore the normal feature content of the registers being used for
+ * the AP Mailbox.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "GeneralServices.h"
+#include "OptionMultiSocket.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "PreserveMailbox.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_PRESERVEMAILBOX_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE PreserveMailboxFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  The contents of the mailbox registers should always be preserved.
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               Always TRUE
+ *
+ */
+BOOLEAN
+STATIC
+IsPreserveAroundMailboxEnabled (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  return TRUE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Save and Restore or Initialize the content of the mailbox registers.
+ *
+ * The registers used for AP mailbox should have the content related to their function
+ * preserved.
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+PreserveMailboxes (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  PRESERVE_MAILBOX_FAMILY_SERVICES *FamilySpecificServices;
+  UINT32 Socket;
+  UINT32 Module;
+  PCI_ADDR BaseAddress;
+  PCI_ADDR MailboxRegister;
+  PRESERVE_MAILBOX_FAMILY_REGISTER *NextRegister;
+  AGESA_STATUS IgnoredStatus;
+  AGESA_STATUS HeapStatus;
+  UINT32 Value;
+  ALLOCATE_HEAP_PARAMS AllocateParams;
+  LOCATE_HEAP_PTR LocateParams;
+  UINT32 RegisterEntryIndex;
+
+  BaseAddress.AddressValue = ILLEGAL_SBDFO;
+
+  if (EntryPoint == CPU_FEAT_AFTER_COHERENT_DISCOVERY) {
+    // The save step.  Save either the register content or zero (for cold boot, if family specifies that).
+    AllocateParams.BufferHandle = PRESERVE_MAIL_BOX_HANDLE;
+    AllocateParams.RequestedBufferSize = (sizeof (UINT32) * (MAX_PRESERVE_REGISTER_ENTRIES * (MAX_SOCKETS * MAX_DIES)));
+    AllocateParams.Persist = HEAP_SYSTEM_MEM;
+    HeapStatus = HeapAllocateBuffer (&AllocateParams, StdHeader);
+    ASSERT ((HeapStatus == AGESA_SUCCESS) && (AllocateParams.BufferPtr != NULL));
+    LibAmdMemFill (AllocateParams.BufferPtr, 0xFF, AllocateParams.RequestedBufferSize, StdHeader);
+    RegisterEntryIndex = 0;
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+        if (GetPciAddress (StdHeader, Socket, Module, &BaseAddress, &IgnoredStatus)) {
+          GetFeatureServicesOfSocket (&PreserveMailboxFamilyServiceTable, Socket, (CONST VOID **)&FamilySpecificServices, StdHeader);
+          ASSERT (FamilySpecificServices != NULL);
+          NextRegister = FamilySpecificServices->RegisterList;
+          while (NextRegister->Register.AddressValue != ILLEGAL_SBDFO) {
+            ASSERT (RegisterEntryIndex <
+                    (MAX_PRESERVE_REGISTER_ENTRIES * GetPlatformNumberOfSockets () * GetPlatformNumberOfModules ()));
+            if (FamilySpecificServices->IsZeroOnCold && (!IsWarmReset (StdHeader))) {
+              Value = 0;
+            } else {
+              MailboxRegister = BaseAddress;
+              MailboxRegister.Address.Function = NextRegister->Register.Address.Function;
+              MailboxRegister.Address.Register = NextRegister->Register.Address.Register;
+              LibAmdPciRead (AccessWidth32, MailboxRegister, &Value, StdHeader);
+              Value &= NextRegister->Mask;
+            }
+            (* (MAILBOX_REGISTER_SAVE_ENTRY) AllocateParams.BufferPtr) [RegisterEntryIndex] = Value;
+            RegisterEntryIndex++;
+            NextRegister++;
+          }
+        }
+      }
+    }
+  } else if ((EntryPoint == CPU_FEAT_INIT_LATE_END) || (EntryPoint == CPU_FEAT_AFTER_RESUME_MTRR_SYNC)) {
+    // The restore step.  Just write out the saved content in the buffer.
+    LocateParams.BufferHandle = PRESERVE_MAIL_BOX_HANDLE;
+    HeapStatus = HeapLocateBuffer (&LocateParams, StdHeader);
+    ASSERT ((HeapStatus == AGESA_SUCCESS) && (LocateParams.BufferPtr != NULL));
+    RegisterEntryIndex = 0;
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+        if (GetPciAddress (StdHeader, Socket, Module, &BaseAddress, &IgnoredStatus)) {
+          GetFeatureServicesOfSocket (&PreserveMailboxFamilyServiceTable, Socket, (CONST VOID **)&FamilySpecificServices, StdHeader);
+          NextRegister = FamilySpecificServices->RegisterList;
+          while (NextRegister->Register.AddressValue != ILLEGAL_SBDFO) {
+            ASSERT (RegisterEntryIndex <
+                    (MAX_PRESERVE_REGISTER_ENTRIES * GetPlatformNumberOfSockets () * GetPlatformNumberOfModules ()));
+            MailboxRegister = BaseAddress;
+            MailboxRegister.Address.Function = NextRegister->Register.Address.Function;
+            MailboxRegister.Address.Register = NextRegister->Register.Address.Register;
+            LibAmdPciRead (AccessWidth32, MailboxRegister, &Value, StdHeader);
+            Value = ((Value & ~NextRegister->Mask) | (* (MAILBOX_REGISTER_SAVE_ENTRY) LocateParams.BufferPtr) [RegisterEntryIndex]);
+            LibAmdPciWrite (AccessWidth32, MailboxRegister, &Value, StdHeader);
+            RegisterEntryIndex++;
+            NextRegister++;
+          }
+        }
+      }
+    }
+    HeapStatus = HeapDeallocateBuffer (PRESERVE_MAIL_BOX_HANDLE, StdHeader);
+  }
+  return AGESA_SUCCESS;
+}
+
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeaturePreserveAroundMailbox =
+{
+  PreserveAroundMailbox,
+  (CPU_FEAT_AFTER_COHERENT_DISCOVERY | CPU_FEAT_INIT_LATE_END | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+  IsPreserveAroundMailboxEnabled,
+  PreserveMailboxes
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/PreserveMailbox.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/PreserveMailbox.h
new file mode 100644
index 0000000000..36229ef17e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/PreserveMailbox.h
@@ -0,0 +1,98 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Preserve Registers used for AP Mailbox.
+ *
+ * Save and Restore the normal feature content of the registers being used for
+ * the AP Mailbox.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 50096 $   @e \$Date: 2011-04-01 16:17:10 -0600 (Fri, 01 Apr 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _PRESERVE_MAILBOX_H_
+#define _PRESERVE_MAILBOX_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+#define MAX_PRESERVE_REGISTER_ENTRIES 2      ///< There is room on the heap for up to this per node.
+
+/// Reference to a save buffer.
+typedef UINT32 (*MAILBOX_REGISTER_SAVE_ENTRY) [MAX_PRESERVE_REGISTER_ENTRIES];
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Family specific mailbox register descriptor.
+ *
+ * Describes a register and bits within the register used as the mailbox.
+ */
+typedef struct  {
+  PCI_ADDR Register;                          ///< The PCI address of a mailbox register.
+  UINT32   Mask;                              ///< The mask of bits used in Register as the mailbox.
+} PRESERVE_MAILBOX_FAMILY_REGISTER;
+
+/**
+ * Descriptor for family specific save-restore.
+ *
+ * Provide a list of the register offsets to save-restore on each node.  Optionally, zero the
+ * register instead of restoring it.
+ */
+typedef struct  {
+  UINT16          Revision;                        ///< Interface version
+  // Public Data.
+  BOOLEAN                           IsZeroOnCold;  ///< On a cold boot, zero the register instead of restore.
+  PRESERVE_MAILBOX_FAMILY_REGISTER *RegisterList;  ///< The list of registers, terminated by ILLEGAL_SBDFO.
+} PRESERVE_MAILBOX_FAMILY_SERVICES;
+
+
+/*----------------------------------------------------------------------------------------
+ *                          F U N C T I O N S     P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _PRESERVE_MAILBOX_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuApm.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuApm.c
new file mode 100644
index 0000000000..733175d651
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuApm.c
@@ -0,0 +1,205 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Application Power Management (APM) feature support code.
+ *
+ * Contains code that declares the AGESA CPU APM related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "cpuFeatures.h"
+#include "cpuApm.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUAPM_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+EnableApmOnSocket (
+  IN       VOID *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE ApmFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should Application Power Management (APM) be enabled
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               APM is supported.
+ * @retval       FALSE              APM cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsApmFeatureEnabled (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32              Socket;
+  BOOLEAN             IsEnabled;
+  APM_FAMILY_SERVICES *FamilyServices;
+
+  IsEnabled = FALSE;
+
+  for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      GetFeatureServicesOfSocket (&ApmFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+      if (FamilyServices != NULL) {
+        if (FamilyServices->IsApmSupported (FamilyServices, PlatformConfig, Socket, StdHeader)) {
+          IsEnabled = TRUE;
+          break;
+        }
+      }
+    }
+  }
+  return IsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable Application Power Management (APM)
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeApmFeature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       BscSocket;
+  UINT32       Ignored;
+  UINT32       Socket;
+  UINT32       NumberOfSockets;
+  AP_TASK      TaskPtr;
+  AGESA_STATUS IgnoredSts;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "    APM mode is enabled\n");
+
+  IdentifyCore (StdHeader, &BscSocket, &Ignored, &Ignored, &IgnoredSts);
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  TaskPtr.FuncAddress.PfApTaskI = EnableApmOnSocket;
+  TaskPtr.DataTransfer.DataSizeInDwords = 2;
+  TaskPtr.DataTransfer.DataPtr = PlatformConfig;
+  TaskPtr.DataTransfer.DataTransferFlags = 0;
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      if (Socket != BscSocket) {
+        ApUtilRunCodeOnSocketCore ((UINT8) Socket, 0, &TaskPtr, StdHeader);
+      }
+    }
+  }
+
+  EnableApmOnSocket (PlatformConfig, StdHeader);
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  AP task to enable APM
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+EnableApmOnSocket (
+  IN       VOID *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  APM_FAMILY_SERVICES *FamilyServices;
+
+  GetFeatureServicesOfCurrentCore (&ApmFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  FamilyServices->EnableApmOnSocket (FamilyServices,
+                                     PlatformConfig,
+                                     StdHeader);
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureApm =
+{
+  CpuApm,
+  (CPU_FEAT_BEFORE_RELINQUISH_AP | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+  IsApmFeatureEnabled,
+  InitializeApmFeature
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuApm.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuApm.h
new file mode 100644
index 0000000000..24a58bc731
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuApm.h
@@ -0,0 +1,130 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Application Power Management (APM) Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU APM related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 54493 $   @e \$Date: 2011-06-08 15:21:06 -0600 (Wed, 08 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_APM_H_
+#define _CPU_APM_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+//  Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (APM_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if Application Power Management (APM) is supported.
+ *
+ * @param[in]    ApmServices        APM services.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    Socket             Zero-based socket number.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               APM is supported.
+ * @retval       FALSE              APM is not supported.
+ *
+ */
+typedef BOOLEAN F_APM_IS_SUPPORTED (
+  IN       APM_FAMILY_SERVICES    *CpbServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       UINT32                 Socket,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_APM_IS_SUPPORTED *PF_APM_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to enable APM.
+ *
+ * @param[in]    ApmServices        APM services.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_APM_INIT (
+  IN       APM_FAMILY_SERVICES    *ApmServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_APM_INIT *PF_APM_INIT;
+
+/**
+ * Provide the interface to the APM Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _APM_FAMILY_SERVICES {
+  UINT16          Revision;                                             ///< Interface version
+  // Public Methods.
+  PF_APM_IS_SUPPORTED IsApmSupported;                                   ///< Method: Family specific call to check if APM is supported.
+  PF_APM_INIT         EnableApmOnSocket;                                ///< Method: Family specific call to enable APM.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ *                          F U N C T I O N S     P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _CPU_APM_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuC6State.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuC6State.c
new file mode 100644
index 0000000000..89426e4633
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuC6State.c
@@ -0,0 +1,261 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU C6 feature support code.
+ *
+ * Contains code that declares the AGESA CPU C6 related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "OptionMultiSocket.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "cpuFeatures.h"
+#include "cpuC6State.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUC6STATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+EnableC6OnSocket (
+  IN       VOID *EntryPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE C6FamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should C6 be enabled
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               C6 is supported.
+ * @retval       FALSE              C6 cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsC6FeatureEnabled (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32             Socket;
+  BOOLEAN            IsEnabled;
+  C6_FAMILY_SERVICES *FamilyServices;
+
+  IsEnabled = FALSE;
+  if (PlatformConfig->CStateMode == CStateModeC6) {
+    IsEnabled = TRUE;
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (IsProcessorPresent (Socket, StdHeader)) {
+        GetFeatureServicesOfSocket (&C6FamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+        if ((FamilyServices == NULL) || !FamilyServices->IsC6Supported (FamilyServices, Socket, PlatformConfig, StdHeader)) {
+          IsEnabled = FALSE;
+          break;
+        }
+      }
+    }
+  }
+  return IsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable the C6 C-state
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeC6Feature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32  BscSocket;
+  UINT32  Ignored;
+  UINT32  BscCoreNum;
+  UINT32  Core;
+  UINT32  Socket;
+  UINT32  NumberOfSockets;
+  UINT32  NumberOfCores;
+  AP_TASK TaskPtr;
+  AMD_CPU_EARLY_PARAMS CpuEarlyParams;
+  C6_FAMILY_SERVICES  *C6FamilyServices;
+  AGESA_STATUS IgnoredSts;
+
+  CpuEarlyParams.PlatformConfig = *PlatformConfig;
+
+  TaskPtr.FuncAddress.PfApTaskIC = EnableC6OnSocket;
+  TaskPtr.DataTransfer.DataSizeInDwords = 2;
+  TaskPtr.DataTransfer.DataPtr = &EntryPoint;
+  TaskPtr.DataTransfer.DataTransferFlags = 0;
+  TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+  OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, &CpuEarlyParams);
+
+  if ((EntryPoint & (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC)) != 0) {
+    // Load any required microcode patches on both normal boot and resume from S3.
+    IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+    GetFeatureServicesOfSocket (&C6FamilyServiceTable, BscSocket, (CONST VOID **)&C6FamilyServices, StdHeader);
+    if (C6FamilyServices != NULL) {
+      C6FamilyServices->ReloadMicrocodePatchAfterMemInit (StdHeader);
+    }
+
+    // run code on all APs
+    TaskPtr.DataTransfer.DataSizeInDwords = 0;
+    TaskPtr.ExeFlags = 0;
+
+    NumberOfSockets = GetPlatformNumberOfSockets ();
+
+    for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+      if (IsProcessorPresent (Socket, StdHeader)) {
+        GetFeatureServicesOfSocket (&C6FamilyServiceTable, Socket, (CONST VOID **)&C6FamilyServices, StdHeader);
+        if (C6FamilyServices != NULL) {
+          // run code on all APs
+          TaskPtr.FuncAddress.PfApTask = C6FamilyServices->ReloadMicrocodePatchAfterMemInit;
+          if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+            for (Core = 0; Core < NumberOfCores; Core++) {
+              if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+                ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+  return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  'Local' core 0 task to enable C6 on it's socket.
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ * @param[in]    CpuEarlyParams     Service parameters.
+ *
+ */
+VOID
+STATIC
+EnableC6OnSocket (
+  IN       VOID *EntryPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+  )
+{
+
+  C6_FAMILY_SERVICES *FamilyServices;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "    C6 is enabled\n");
+
+  GetFeatureServicesOfCurrentCore (&C6FamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  FamilyServices->InitializeC6 (FamilyServices,
+                                *((UINT64 *) EntryPoint),
+                                &CpuEarlyParams->PlatformConfig,
+                                StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Reload microcode patch after memory is initialized.
+ *
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+ReloadMicrocodePatchAfterMemInit (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  LoadMicrocodePatch (StdHeader);
+}
+
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureC6State =
+{
+  C6Cstate,
+  (CPU_FEAT_AFTER_PM_INIT | CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+  IsC6FeatureEnabled,
+  InitializeC6Feature
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuC6State.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuC6State.h
new file mode 100644
index 0000000000..2986aafa9d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuC6State.h
@@ -0,0 +1,157 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU C6 Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU C6 related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_C6_STATE_H_
+#define _CPU_C6_STATE_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+//  Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (C6_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if C6 is supported.
+ *
+ * @param[in]    C6Services         C6 C-state services.
+ * @param[in]    Socket             Zero-based socket number.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               C6 is supported.
+ * @retval       FALSE              C6 is not supported.
+ *
+ */
+typedef BOOLEAN F_C6_IS_SUPPORTED (
+  IN       C6_FAMILY_SERVICES      *C6Services,
+  IN       UINT32                  Socket,
+  IN       PLATFORM_CONFIGURATION  *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_C6_IS_SUPPORTED *PF_C6_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to enable C6.
+ *
+ * @param[in]    C6Services         C6 services.
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_C6_INIT (
+  IN       C6_FAMILY_SERVICES      *C6Services,
+  IN       UINT64                  EntryPoint,
+  IN       PLATFORM_CONFIGURATION  *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_C6_INIT             *PF_C6_INIT;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to reload microcode patch after memory is initialized.
+ *
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+typedef VOID F_C6_RELOAD_MICORCODE_PATCH_AFTER_MEM_INIT (
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_C6_RELOAD_MICORCODE_PATCH_AFTER_MEM_INIT    *PF_C6_RELOAD_MICORCODE_PATCH_AFTER_MEM_INIT;
+
+/**
+ * Provide the interface to the C6 Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _C6_FAMILY_SERVICES {
+  UINT16          Revision;                                             ///< Interface version
+  // Public Methods.
+  PF_C6_IS_SUPPORTED     IsC6Supported;                                 ///< Method: Family specific call to check if C6 is supported.
+  PF_C6_INIT             InitializeC6;                                  ///< Method: Family specific call to enable C6.
+  PF_C6_RELOAD_MICORCODE_PATCH_AFTER_MEM_INIT  ReloadMicrocodePatchAfterMemInit;   ///< Method: Family specific call to reload microcode patch after memory is initialized.
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Reload microcode patch after memory is initialized.
+ *
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+ReloadMicrocodePatchAfterMemInit (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          F U N C T I O N S     P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _CPU_C6_STATE_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCacheFlushOnHalt.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCacheFlushOnHalt.c
new file mode 100644
index 0000000000..11fd398e87
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCacheFlushOnHalt.c
@@ -0,0 +1,200 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Cache Flush On Halt Function.
+ *
+ * Contains code to initialize Cache Flush On Halt feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "cpuApicUtilities.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FEATURE_CPUCACHEFLUSHONHALT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE CacheFlushOnHaltFamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+EnableCacheFlushOnHaltOnSocket (
+  IN       VOID *EntryPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+  );
+
+AGESA_STATUS
+InitializeCacheFlushOnHaltFeature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          P U B L I C     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should cache flush on halt be enabled
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               core leveling is supported.
+ * @retval       FALSE              core leveling cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsCFOHEnabled (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  return (TRUE);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  InitializeCacheFlushOnHaltFeature
+ *
+ *    CPU feature leveling. Enable Cpu Cache Flush On Halt Function
+ *
+ *    @param[in]       EntryPoint       Timepoint designator.
+ *    @param[in]       PlatformConfig   Contains the runtime modifiable feature input data.
+ *    @param[in,out]   StdHeader        Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ *    @return          The most severe status of any family specific service.
+ */
+AGESA_STATUS
+InitializeCacheFlushOnHaltFeature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+
+  AP_TASK      TaskPtr;
+  AMD_CPU_EARLY_PARAMS CpuEarlyParams;
+
+  CpuEarlyParams.PlatformConfig = *PlatformConfig;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "    Cache flush on hlt feature is enabled\n");
+  TaskPtr.FuncAddress.PfApTaskIC = EnableCacheFlushOnHaltOnSocket;
+  TaskPtr.DataTransfer.DataSizeInDwords = 2;
+  TaskPtr.DataTransfer.DataPtr = &EntryPoint;
+  TaskPtr.DataTransfer.DataTransferFlags = 0;
+  TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+  OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, &CpuEarlyParams);
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  'Local' core 0 task to enable Cache Flush On Halt on it's socket.
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ * @param[in]    CpuEarlyParams     Service parameters.
+ *
+ */
+VOID
+STATIC
+EnableCacheFlushOnHaltOnSocket (
+  IN       VOID *EntryPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+  )
+{
+  CPU_CFOH_FAMILY_SERVICES *FamilyServices;
+
+  GetFeatureServicesOfCurrentCore (&CacheFlushOnHaltFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  if (FamilyServices != NULL) {
+    FamilyServices->SetCacheFlushOnHaltRegister (FamilyServices, *((UINT64 *) EntryPoint), &CpuEarlyParams->PlatformConfig, StdHeader);
+  }
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCacheFlushOnHalt =
+{
+  CacheFlushOnHalt,
+  (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+  IsCFOHEnabled,
+  InitializeCacheFlushOnHaltFeature
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCacheInit.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCacheInit.c
new file mode 100644
index 0000000000..ca60b2bb0f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCacheInit.c
@@ -0,0 +1,752 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Execution Cache Allocation functions.
+ *
+ * Contains code for doing Execution Cache Allocation for ROM space
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56322 $   @e \$Date: 2011-07-11 16:51:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Topology.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuCacheInit.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUCACHEINIT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+// 4G - 1, ~max ROM space
+#define SIZE_INFINITE_EXE_CACHE 0xFFFFFFFF
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *             L2 cache Association to Way translation table
+ *----------------------------------------------------------------------------
+ */
+CONST UINT8 ROMDATA L2AssocToL2WayTranslationTable[] =
+{
+  0,
+  1,
+  2,
+  0xFF,
+  4,
+  0xFF,
+  8,
+  0xFF,
+  16,
+  0xFF,
+  32,
+  48,
+  64,
+  96,
+  128,
+  0xFF,
+};
+
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT8
+STATIC
+Ceiling (
+  IN UINT32 Divisor,
+  IN UINT32 Dividend
+  );
+
+UINT32
+STATIC
+CalculateOccupiedExeCache (
+  IN AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+CompareRegions (
+  IN      EXECUTION_CACHE_REGION  ARegion,
+  IN      EXECUTION_CACHE_REGION  BRegion,
+  IN OUT  MERGED_CACHE_REGION     *CRegion,
+  IN      AMD_CONFIG_PARAMS       *StdHeader
+  );
+
+BOOLEAN
+STATIC
+IsPowerOfTwo (
+  IN      UINT32                  TestNumber
+  );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will setup ROM execution cache.
+ *
+ * The execution cache regions are passed in, the max number of execution cache regions
+ * is three.  Several rules are checked for compliance. If a rule test fails then one of
+ * these error suffixes will be added to the general CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR
+ * in the SubReason field
+ *   -1  available cache size is less than requested, the ROM execution cache
+ *       region has been reduced or eliminated.
+ *   -2  at least one execution cache region crosses the 1MB line, the ROM execution
+ *       cache size has been reduced.
+ *   -3  at least one execution cache region crosses the 4GB line, the ROM execution
+ *       cache size has been reduced.
+ *   -4  the start address of a region is not at the boundary of cache size,
+ *        the starting address has been adjusted downward
+ *   -5  execution cache start address less than D0000, request is ignored
+ *   -6  more than 2 execution cache regions are above 1MB, request is ignored
+ * If the start address of all three regions are zero, then no execution cache is allocated.
+ *
+ * @param[in]   StdHeader          Handle to config for library and services
+ * @param[in]   AmdExeAddrMapPtr   Pointer to the start of EXECUTION_CACHE_REGION array
+ *
+ * @retval      AGESA_SUCCESS      No error
+ * @retval      AGESA_WARNING      AGESA_CACHE_SIZE_REDUCED; AGESA_CACHE_REGIONS_ACROSS_1MB;
+ *                                 AGESA_CACHE_REGIONS_ACROSS_4GB;
+ * @retval      AGESA_ERROR        AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY;
+ *                                 AGESA_CACHE_START_ADDRESS_LESS_D0000;
+ *                                 AGESA_THREE_CACHE_REGIONS_ABOVE_1MB;
+ *
+ */
+AGESA_STATUS
+AllocateExecutionCache (
+  IN AMD_CONFIG_PARAMS *StdHeader,
+  IN EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+  )
+{
+  AGESA_STATUS               AgesaStatus;
+  AMD_GET_EXE_SIZE_PARAMS    AmdGetExeSize;
+  UINT32                     CurrentAllocatedExeCacheSize;
+  UINT32                     RemainingExecutionCacheSize;
+  UINT64                     MsrData;
+  UINT64                     SecondMsrData;
+  UINT32                     RequestStartAddr;
+  UINT32                     RequestSize;
+  UINT32                     StartFixMtrr;
+  UINT32                     CurrentMtrr;
+  UINT32                     EndFixMtrr;
+  UINT8                      i;
+  UINT8                      Ignored;
+  CACHE_INFO                 *CacheInfoPtr;
+  CPU_SPECIFIC_SERVICES      *FamilySpecificServices;
+  EXECUTION_CACHE_REGION      MtrrV6;
+  EXECUTION_CACHE_REGION      MtrrV7;
+  MERGED_CACHE_REGION         Result;
+
+  //
+  // If start addresses of all three regions are zero, then return early
+  //
+  if (AmdExeAddrMapPtr[0].ExeCacheStartAddr == 0) {
+    if (AmdExeAddrMapPtr[1].ExeCacheStartAddr == 0) {
+      if (AmdExeAddrMapPtr[2].ExeCacheStartAddr == 0) {
+        // No regions defined by the caller
+        return AGESA_SUCCESS;
+      }
+    }
+  }
+
+  // Get available cache size for ROM execution
+  AmdGetExeSize.StdHeader = *StdHeader;
+  AgesaStatus = AmdGetAvailableExeCacheSize (&AmdGetExeSize);
+  CurrentAllocatedExeCacheSize = CalculateOccupiedExeCache (StdHeader);
+  ASSERT (CurrentAllocatedExeCacheSize <= AmdGetExeSize.AvailableExeCacheSize);
+  IDS_HDT_CONSOLE (CPU_TRACE, "  Cache size available for execution cache: 0x%x\n", AmdGetExeSize.AvailableExeCacheSize);
+  RemainingExecutionCacheSize = AmdGetExeSize.AvailableExeCacheSize - CurrentAllocatedExeCacheSize;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &Ignored, StdHeader);
+
+  // Process each request entry 0 to 2
+  for (i = 0; i < 3; i++) {
+    // Exit if no more cache available
+    if (RemainingExecutionCacheSize == 0) {
+      break;
+    }
+
+    // Skip the region if ExeCacheSize = 0
+    if (AmdExeAddrMapPtr[i].ExeCacheSize == 0) {
+      continue;
+    }
+
+    // Align starting addresses on 32K boundary
+    AmdExeAddrMapPtr[i].ExeCacheStartAddr =
+      AmdExeAddrMapPtr[i].ExeCacheStartAddr & 0xFFFF8000;
+
+    // Adjust size to multiple of 32K (rounding up)
+    if ((AmdExeAddrMapPtr[i].ExeCacheSize % 0x8000) != 0) {
+      AmdExeAddrMapPtr[i].ExeCacheSize = ((AmdExeAddrMapPtr[i].ExeCacheSize + 0x8000) & 0xFFFF8000);
+    }
+
+    // Boundary alignment check and confirm size is an even power of two
+    if ( !IsPowerOfTwo (AmdExeAddrMapPtr[i].ExeCacheSize) ||
+    ((AmdExeAddrMapPtr[i].ExeCacheStartAddr % AmdExeAddrMapPtr[i].ExeCacheSize) != 0) ) {
+      AgesaStatus = AGESA_ERROR;
+      PutEventLog (AgesaStatus,
+                   (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY),
+                   i, AmdExeAddrMapPtr[i].ExeCacheStartAddr, AmdExeAddrMapPtr[i].ExeCacheSize, 0, StdHeader);
+      break;
+    }
+
+    // Check start address boundary
+    if (AmdExeAddrMapPtr[i].ExeCacheStartAddr < 0xD0000) {
+      AgesaStatus = AGESA_ERROR;
+      PutEventLog (AgesaStatus,
+                   (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_CACHE_START_ADDRESS_LESS_D0000),
+                   i, AmdExeAddrMapPtr[i].ExeCacheStartAddr, AmdExeAddrMapPtr[i].ExeCacheSize, 0, StdHeader);
+      break;
+    }
+
+    if (CacheInfoPtr->CarExeType == LimitedByL2Size) {
+      // Verify available execution cache size for region 0 to 2 request
+      if (RemainingExecutionCacheSize < AmdExeAddrMapPtr[i].ExeCacheSize) {
+        // Request is larger than available, reduce the allocation & report the change
+        AmdExeAddrMapPtr[i].ExeCacheSize = RemainingExecutionCacheSize;
+        RemainingExecutionCacheSize = 0;
+        AgesaStatus = AGESA_WARNING;
+        PutEventLog (AgesaStatus,
+                     (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_CACHE_SIZE_REDUCED),
+                     i, AmdExeAddrMapPtr[i].ExeCacheStartAddr, AmdExeAddrMapPtr[i].ExeCacheSize, 0, StdHeader);
+      } else {
+        RemainingExecutionCacheSize = RemainingExecutionCacheSize - AmdExeAddrMapPtr[i].ExeCacheSize;
+      }
+    }
+    IDS_HDT_CONSOLE (CPU_TRACE, "  Exe cache allocated: Base 0x%x, Size 0x%x\n", AmdExeAddrMapPtr[i].ExeCacheStartAddr, AmdExeAddrMapPtr[i].ExeCacheSize);
+
+    RequestStartAddr = AmdExeAddrMapPtr[i].ExeCacheStartAddr;
+    RequestSize = AmdExeAddrMapPtr[i].ExeCacheSize;
+
+    if (RequestStartAddr < 0x100000) {
+      // Region starts below 1MB - Fixed MTTR region,
+      // turn on modification bit: MtrrFixDramModEn
+      LibAmdMsrRead (MSR_SYS_CFG, &MsrData, StdHeader);
+      MsrData |= 0x80000;
+      LibAmdMsrWrite (MSR_SYS_CFG, &MsrData, StdHeader);
+
+
+      // Check for 1M boundary crossing
+      if ((RequestStartAddr + RequestSize) > 0x100000) {
+        // Request spans the 1M boundary, reduce the size & report the change
+        RequestSize = 0x100000 - RequestStartAddr;
+        AmdExeAddrMapPtr[i].ExeCacheSize = RequestSize;
+        AgesaStatus = AGESA_WARNING;
+        PutEventLog (AgesaStatus,
+                     (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_CACHE_REGIONS_ACROSS_1MB),
+                     i, RequestStartAddr, RequestSize, 0, StdHeader);
+      }
+
+      // Find start MTTR and end MTTR for the requested region
+      StartFixMtrr = AMD_MTRR_FIX4K_BASE + ((RequestStartAddr >> 15) & 0x7);
+      EndFixMtrr = AMD_MTRR_FIX4K_BASE + ((((RequestStartAddr + RequestSize) - 1) >> 15) & 0x7);
+
+      //
+      //Check Mtrr before we use it,
+      //  if Mtrr has been used, we need to recover the previously allocated size.
+      //    (only work in blocks of 32K size - no splitting of ways)
+      for (CurrentMtrr = StartFixMtrr; CurrentMtrr <= EndFixMtrr; CurrentMtrr++) {
+        LibAmdMsrRead (CurrentMtrr, &MsrData, StdHeader);
+        if ((CacheInfoPtr->CarExeType == LimitedByL2Size) && (MsrData != 0)) {
+          // MTRR previously allocated, recover size
+          RemainingExecutionCacheSize = RemainingExecutionCacheSize + 0x8000;
+        } else {
+          // Allocate this MTRR
+          MsrData = WP_IO;
+          LibAmdMsrWrite (CurrentMtrr, &MsrData, StdHeader);
+        }
+      }
+      // Turn off modification bit: MtrrFixDramModEn
+      LibAmdMsrRead (MSR_SYS_CFG, &MsrData, StdHeader);
+      MsrData &= 0xFFFFFFFFFFF7FFFFULL;
+      LibAmdMsrWrite (MSR_SYS_CFG, &MsrData, StdHeader);
+
+
+    } else {
+      // Region above 1MB -  Variable MTTR region
+      //    Need to check both VarMTRRs for each requested region for match or overlap
+      //
+
+      // Check for 4G boundary crossing   (using size-1 to keep in 32bit math range)
+      if ((0xFFFFFFFFUL - RequestStartAddr) < (RequestSize - 1)) {
+        RequestSize = (0xFFFFFFFFUL - RequestStartAddr) + 1;
+        AgesaStatus = AGESA_WARNING;
+        AmdExeAddrMapPtr[i].ExeCacheSize = RequestSize;
+        PutEventLog (AgesaStatus,
+                     (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_CACHE_REGIONS_ACROSS_4GB),
+                     i, RequestStartAddr, RequestSize, 0, StdHeader);
+      }
+      LibAmdMsrRead (AMD_MTRR_VARIABLE_BASE6, &MsrData, StdHeader);
+      MtrrV6.ExeCacheStartAddr = ((UINT32) MsrData) & 0xFFFFF000UL;
+      LibAmdMsrRead (AMD_MTRR_VARIABLE_BASE6 + 1, &MsrData, StdHeader);
+      MtrrV6.ExeCacheSize = (0xFFFFFFFFUL - (((UINT32) MsrData) & 0xFFFFF000UL)) + 1;
+
+      LibAmdMsrRead (AMD_MTRR_VARIABLE_BASE7, &MsrData, StdHeader);
+      MtrrV7.ExeCacheStartAddr = ((UINT32) MsrData) & 0xFFFFF000UL;
+      LibAmdMsrRead (AMD_MTRR_VARIABLE_BASE7 + 1, &MsrData, StdHeader);
+      MtrrV7.ExeCacheSize = (0xFFFFFFFFUL - (((UINT32) MsrData) & 0xFFFFF000UL)) + 1;
+
+      CompareRegions (AmdExeAddrMapPtr[i], MtrrV6, &Result, StdHeader);
+      if (Result.OverlapType == EmptySet) {
+        // MTRR6 is empty. Allocate request into MTRR6.
+        // Note: since all merges are moved down to MTRR6, if MTRR6 is empty so should MTRR7 also be empty
+        MtrrV6.ExeCacheStartAddr = AmdExeAddrMapPtr[i].ExeCacheStartAddr;
+        MtrrV6.ExeCacheSize = AmdExeAddrMapPtr[i].ExeCacheSize;
+      } else if ((Result.OverlapType == Disjoint) ||
+                 (Result.OverlapType == NotCombinable)) {
+        // MTRR6 is in use, and request does not overlap with MTRR6, check MTRR7
+        CompareRegions (AmdExeAddrMapPtr[i], MtrrV7, &Result, StdHeader);
+        if (Result.OverlapType == EmptySet) {
+          // MTRR7 is empty. Allocate request into MTRR7.
+          MtrrV7.ExeCacheStartAddr = AmdExeAddrMapPtr[i].ExeCacheStartAddr;
+          MtrrV7.ExeCacheSize = AmdExeAddrMapPtr[i].ExeCacheSize;
+        } else if ((Result.OverlapType == Disjoint) ||
+                   (Result.OverlapType == NotCombinable)) {
+          // MTRR7 is also in use and request does not overlap - error: 3rd region above 1M
+          AgesaStatus = AGESA_ERROR;
+          PutEventLog (AgesaStatus,
+                         (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_THREE_CACHE_REGIONS_ABOVE_1MB),
+                         i, AmdExeAddrMapPtr[i].ExeCacheStartAddr, AmdExeAddrMapPtr[i].ExeCacheSize, 0, StdHeader);
+          break;
+        } else {
+          // Merge request with MTRR7
+          MtrrV7.ExeCacheStartAddr = Result.MergedStartAddr;
+          MtrrV7.ExeCacheSize = Result.MergedSize;
+          if (CacheInfoPtr->CarExeType == LimitedByL2Size) {
+            RemainingExecutionCacheSize += Result.OverlapAmount;
+          }
+        }
+      } else {
+        // Request overlaps with MTRR6, Merge request with MTRR6
+        MtrrV6.ExeCacheStartAddr = Result.MergedStartAddr;
+        MtrrV6.ExeCacheSize = Result.MergedSize;
+        if (CacheInfoPtr->CarExeType == LimitedByL2Size) {
+          RemainingExecutionCacheSize += Result.OverlapAmount;
+        }
+        CompareRegions (MtrrV6, MtrrV7, &Result, StdHeader);
+        if ((Result.OverlapType != Disjoint) &&
+            (Result.OverlapType != EmptySet) &&
+            (Result.OverlapType != NotCombinable)) {
+          // MTRR6 and MTRR7 now overlap, merge them into MTRR6
+          MtrrV6.ExeCacheStartAddr = Result.MergedStartAddr;
+          MtrrV6.ExeCacheSize = Result.MergedSize;
+          MtrrV7.ExeCacheStartAddr = 0;
+          MtrrV7.ExeCacheSize = 0;
+          if (CacheInfoPtr->CarExeType == LimitedByL2Size) {
+            RemainingExecutionCacheSize += Result.OverlapAmount;
+          }
+        }
+      }
+
+      // Set the VarMTRRs.  Base first, then size/mask; this allows for expanding the region safely.
+      if (MtrrV6.ExeCacheSize != 0) {
+        MsrData = (UINT64) ( 0xFFFFFFFF00000000ULL | ((0xFFFFFFFFUL - (MtrrV6.ExeCacheSize - 1)) | 0x0800UL));
+        MsrData &= CacheInfoPtr->VariableMtrrMask;
+        SecondMsrData = (UINT64) ( MtrrV6.ExeCacheStartAddr | (WP_IO & 0xFULL));
+      } else {
+        MsrData = 0;
+        SecondMsrData = 0;
+      }
+      LibAmdMsrWrite (AMD_MTRR_VARIABLE_BASE6, &SecondMsrData, StdHeader);
+      LibAmdMsrWrite ((AMD_MTRR_VARIABLE_BASE6 + 1), &MsrData, StdHeader);
+
+      if (MtrrV7.ExeCacheSize != 0) {
+        MsrData = (UINT64) ( 0xFFFFFFFF00000000ULL | ((0xFFFFFFFFUL - (MtrrV7.ExeCacheSize - 1)) | 0x0800UL));
+        MsrData &= CacheInfoPtr->VariableMtrrMask;
+        SecondMsrData = (UINT64) ( MtrrV7.ExeCacheStartAddr | (WP_IO & 0xFULL));
+      } else {
+        MsrData = 0;
+        SecondMsrData = 0;
+      }
+      LibAmdMsrWrite (AMD_MTRR_VARIABLE_BASE7, &SecondMsrData, StdHeader);
+      LibAmdMsrWrite ((AMD_MTRR_VARIABLE_BASE7 + 1), &MsrData, StdHeader);
+    } // endif of MTRR region check
+  } // end of requests For loop
+
+  return AgesaStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function calculates available L2 cache space for ROM execution.
+ *
+ * @param[in]   AmdGetExeSizeParams  Pointer to the start of AmdGetExeSizeParamsPtr structure
+ *
+ * @retval      AGESA_SUCCESS      No error
+ * @retval      AGESA_ALERT        No cache available for execution cache.
+ *
+ */
+AGESA_STATUS
+AmdGetAvailableExeCacheSize (
+  IN OUT   AMD_GET_EXE_SIZE_PARAMS *AmdGetExeSizeParams
+  )
+{
+  UINT8     WayUsedForCar;
+  UINT8     L2Assoc;
+  UINT32    L2Size;
+  UINT32    L2WaySize;
+  UINT32    CurrentCoreNum;
+  UINT8     L2Ways;
+  UINT8     Ignored;
+  UINT32    DieNumber;
+  UINT32    TotalCores;
+  CPUID_DATA  CpuIdDataStruct;
+  CACHE_INFO  *CacheInfoPtr;
+  AP_MAIL_INFO ApMailboxInfo;
+  AGESA_STATUS IgnoredStatus;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &AmdGetExeSizeParams->StdHeader);
+  FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &Ignored, &AmdGetExeSizeParams->StdHeader);
+  // CAR_EXE mode is either "Limited by L2 size" or "Infinite Execution space"
+  ASSERT (CacheInfoPtr->CarExeType < MaxCarExeMode);
+  if (CacheInfoPtr->CarExeType == InfiniteExe) {
+    AmdGetExeSizeParams->AvailableExeCacheSize = SIZE_INFINITE_EXE_CACHE;
+    return AGESA_SUCCESS;
+  }
+
+  // EXE cache size is limited by size of the L2, minus previous allocations for stack, heap, etc.
+  // Check for L2 cache size and way size
+  LibAmdCpuidRead (AMD_CPUID_L2L3Cache_L2TLB, &CpuIdDataStruct, &AmdGetExeSizeParams->StdHeader);
+  L2Assoc = (UINT8) ((CpuIdDataStruct.ECX_Reg >> 12) & 0x0F);
+
+  // get L2Ways from L2 Association to Way translation table
+  L2Ways = L2AssocToL2WayTranslationTable[L2Assoc];
+  ASSERT (L2Ways != 0xFF);
+
+  // get L2Size
+  L2Size = 1024 * ((CpuIdDataStruct.ECX_Reg >> 16) & 0xFFFF);
+
+  // get each L2WaySize
+  L2WaySize = L2Size / L2Ways;
+
+  // Determine the size for execution cache
+  if (IsBsp (&AmdGetExeSizeParams->StdHeader, &IgnoredStatus)) {
+    // BSC (Boot Strap Core)
+    WayUsedForCar = Ceiling (CacheInfoPtr->BspStackSize, L2WaySize) +
+                    Ceiling (CacheInfoPtr->MemTrainingBufferSize, L2WaySize) +
+                    Ceiling (AMD_HEAP_SIZE_PER_CORE , L2WaySize) +
+                    Ceiling (CacheInfoPtr->SharedMemSize, L2WaySize);
+  } else {
+    // AP (Application Processor)
+    GetCurrentCore (&CurrentCoreNum, &AmdGetExeSizeParams->StdHeader);
+
+    GetApMailbox (&ApMailboxInfo.Info, &AmdGetExeSizeParams->StdHeader);
+    DieNumber = (1 << ApMailboxInfo.Fields.ModuleType);
+    GetActiveCoresInCurrentSocket (&TotalCores, &AmdGetExeSizeParams->StdHeader);
+    ASSERT ((TotalCores % DieNumber) == 0);
+    if ((CurrentCoreNum % (TotalCores / DieNumber)) == 0) {
+      WayUsedForCar = Ceiling (CacheInfoPtr->Core0StackSize , L2WaySize) +
+                      Ceiling (CacheInfoPtr->MemTrainingBufferSize, L2WaySize) +
+                      Ceiling (AMD_HEAP_SIZE_PER_CORE , L2WaySize) +
+                      Ceiling (CacheInfoPtr->SharedMemSize, L2WaySize);
+    } else {
+      WayUsedForCar = Ceiling (CacheInfoPtr->Core1StackSize , L2WaySize) +
+                      Ceiling (AMD_HEAP_SIZE_PER_CORE , L2WaySize) +
+                      Ceiling (CacheInfoPtr->SharedMemSize, L2WaySize);
+    }
+  }
+
+  ASSERT (WayUsedForCar < L2Ways);
+
+  if (WayUsedForCar < L2Ways) {
+    AmdGetExeSizeParams->AvailableExeCacheSize = L2WaySize * (L2Ways - WayUsedForCar);
+    return AGESA_SUCCESS;
+  } else {
+    AmdGetExeSizeParams->AvailableExeCacheSize = 0;
+    return AGESA_ALERT;
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function rounds a quotient up if the remainder is not zero.
+ *
+ * @param[in]   Divisor            The divisor
+ * @param[in]   Dividend           The dividend
+ *
+ * @retval      Value              Rounded quotient
+ *
+ */
+UINT8
+STATIC
+Ceiling (
+  IN UINT32 Divisor,
+  IN UINT32 Dividend
+  )
+{
+  if ((Divisor % Dividend) == 0) {
+    return (UINT8) (Divisor / Dividend);
+  } else {
+    return (UINT8) ((Divisor / Dividend) + 1);
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function calculates the amount of cache that has already been allocated on the
+ * executing core.
+ *
+ * @param[in]   StdHeader       Handle to config for library and services
+ *
+ * @returns     Allocated size in bytes
+ *
+ */
+UINT32
+STATIC
+CalculateOccupiedExeCache (
+  IN AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64                     OccupExeCacheSize;
+  UINT64                     MsrData;
+  UINT8                      i;
+
+  MsrData = 0;
+  OccupExeCacheSize = 0;
+
+  //
+  //Calculate Variable MTRR base 6~7
+  //
+  for (i = 0; i < 2; i++) {
+    LibAmdMsrRead ((AMD_MTRR_VARIABLE_BASE6 + (2*i)), &MsrData, StdHeader);
+    if (MsrData != 0) {
+      LibAmdMsrRead ((AMD_MTRR_VARIABLE_BASE6 + (2*i + 1)), &MsrData, StdHeader);
+      OccupExeCacheSize = OccupExeCacheSize + ((~((MsrData & (0xFFFF8000)) - 1))&0xFFFF8000);
+    }
+  }
+
+  //
+  //Calculate Fixed MTRR base D0000~F8000
+  //
+  for (i = 0; i < 6; i++) {
+    LibAmdMsrRead ((AMD_MTRR_FIX4K_BASE + 2 + i), &MsrData, StdHeader);
+    if (MsrData!= 0) {
+      OccupExeCacheSize = OccupExeCacheSize + 0x8000;
+    }
+  }
+
+  return (UINT32)OccupExeCacheSize;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function compares two memory regions for overlap and returns the combined
+ *  Base,Size  to describe the new combined region.
+ *
+ * There are 13 cases for how two regions may overlap:  key: [] region A, ** region B
+ * 1- [  ] ***      9-  ***  [  ]   disjoint regions
+ * 2- [  ]***       10- ***[  ]     adjacent regions
+ * 3- [ ***]        11- **[**]      common ending
+ * 4- [  *]**       12- *[**  ]     extending
+ * 5- [ ** ]        13- *[*]*       contained
+ * 6- [***  ]                       common start, contained
+ * 7- [***]                         identity
+ * 8- [**]**                        common start, extending
+ * 0- one of the regions is empty (has base=0)
+ *
+ * @param[in]     ARegion       pointer to the base,size pair that describes region A
+ * @param[in]     BRegion       pointer to the base,size pair that describes region B
+ * @param[in,out] CRegion       pointer to the base,size pair that describes region C This struct also has the
+ *                              overlap type and the amount of overlap between the regions.
+ * @param[in]     StdHeader     Handle to config for library and services
+ *
+ * @returns       void, nothing
+ */
+
+VOID
+STATIC
+CompareRegions (
+  IN       EXECUTION_CACHE_REGION  ARegion,
+  IN       EXECUTION_CACHE_REGION  BRegion,
+  IN OUT   MERGED_CACHE_REGION     *CRegion,
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  )
+{
+  // Use Int64 to handle regions ending at or above the 4G boundary.
+  UINT64        EndOfA;
+  UINT64        EndOfB;
+
+
+  if ((BRegion.ExeCacheStartAddr == 0) ||
+      (ARegion.ExeCacheStartAddr == 0)) {
+    CRegion->MergedStartAddr  =
+    CRegion->MergedSize       =
+    CRegion->OverlapAmount    = 0;
+    CRegion->OverlapType = EmptySet;
+    return;
+  }
+  if (BRegion.ExeCacheStartAddr < ARegion.ExeCacheStartAddr) {
+    //swap regions A & B. this collapses types 9-13 onto 1-5 and reduces the number of tests
+    CRegion->MergedStartAddr  = ARegion.ExeCacheStartAddr;
+    CRegion->MergedSize       = ARegion.ExeCacheSize;
+    ARegion                   = BRegion;
+    BRegion.ExeCacheStartAddr = CRegion->MergedStartAddr;
+    BRegion.ExeCacheSize      = CRegion->MergedSize;
+  }
+  CRegion->MergedStartAddr  =
+  CRegion->MergedSize       =
+  CRegion->OverlapType      =
+  CRegion->OverlapAmount    = 0;
+
+  if (ARegion.ExeCacheStartAddr == BRegion.ExeCacheStartAddr) {
+    // Common start, cases 6,7, or 8
+    if (ARegion.ExeCacheSize == BRegion.ExeCacheSize) {
+      // case 7, identity. Need to recover the overlap size
+      CRegion->MergedStartAddr  = ARegion.ExeCacheStartAddr;
+      CRegion->MergedSize       = ARegion.ExeCacheSize;
+      CRegion->OverlapAmount    = ARegion.ExeCacheSize;
+      CRegion->OverlapType      = Identity;
+    } else if (ARegion.ExeCacheSize < BRegion.ExeCacheSize) {
+      // case 8, common start extending
+      CRegion->MergedStartAddr  = ARegion.ExeCacheStartAddr;
+      CRegion->MergedSize       = BRegion.ExeCacheSize;
+      CRegion->OverlapType      = CommonStartExtending;
+      CRegion->OverlapAmount    = ARegion.ExeCacheSize;
+    } else {
+      // case 6, common start contained
+      CRegion->MergedStartAddr  = ARegion.ExeCacheStartAddr;
+      CRegion->MergedSize       = ARegion.ExeCacheSize;
+      CRegion->OverlapType      = CommonStartContained;
+      CRegion->OverlapAmount    = BRegion.ExeCacheSize;
+    }
+  } else {
+    // A_Base is less than B_Base. check for cases 1-5
+    EndOfA = ((UINT64) ARegion.ExeCacheStartAddr) + ((UINT64) ARegion.ExeCacheSize);
+
+    if (EndOfA < ((UINT64) BRegion.ExeCacheStartAddr)) {
+      // case 1, disjoint
+      CRegion->MergedStartAddr  =
+      CRegion->MergedSize       =
+      CRegion->OverlapAmount    = 0;
+      CRegion->OverlapType = Disjoint;
+
+    } else if (EndOfA == ((UINT64) BRegion.ExeCacheStartAddr)) {
+      // case 2, adjacent
+      CRegion->OverlapType = Adjacent;
+      CRegion->MergedStartAddr  = ARegion.ExeCacheStartAddr;
+      CRegion->MergedSize       = ARegion.ExeCacheSize + BRegion.ExeCacheSize;
+      CRegion->OverlapAmount    = 0;
+    } else {
+      // EndOfA is > B_Base. check for cases 3,4,5
+      EndOfB = ((UINT64) BRegion.ExeCacheStartAddr) + ((UINT64) BRegion.ExeCacheSize);
+
+      if ( EndOfA < EndOfB) {
+        // case 4, extending
+        CRegion->OverlapType = Extending;
+        CRegion->MergedStartAddr  = ARegion.ExeCacheStartAddr;
+        CRegion->MergedSize       = (UINT32) (EndOfB - ((UINT64) ARegion.ExeCacheStartAddr));
+        CRegion->OverlapAmount    = (UINT32) (EndOfA - ((UINT64) BRegion.ExeCacheStartAddr));
+      } else {
+        // case 3, same end; or case 5, contained
+        CRegion->OverlapType = Contained;
+        CRegion->MergedStartAddr  = ARegion.ExeCacheStartAddr;
+        CRegion->MergedSize       = ARegion.ExeCacheSize;
+        CRegion->OverlapAmount    = BRegion.ExeCacheSize;
+      }
+    }
+  } // endif
+  // Once we have combined the regions, they must still obey the MTRR size and boundary rules
+  if ( CRegion->OverlapType != Disjoint ) {
+    if ((!(IsPowerOfTwo (CRegion->MergedSize))) ||
+       ((CRegion->MergedStartAddr % CRegion->MergedSize) != 0) ) {
+      CRegion->OverlapType = NotCombinable;
+    }
+  }
+
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This local function tests the parameter for being an even power of two
+ *
+ * @param[in]   TestNumber    Number to check
+ *
+ * @retval      TRUE - TestNumber is a power of two,
+ * @retval      FALSE - TestNumber is not a power of two
+ *
+ */
+BOOLEAN
+STATIC
+IsPowerOfTwo (
+  IN      UINT32                  TestNumber
+  )
+{
+  UINT32      PowerTwo;
+
+  ASSERT (TestNumber >= 0x8000UL);
+  PowerTwo = 0x8000UL;                    // Start at 32K
+  while ( TestNumber > PowerTwo ) {
+    PowerTwo = PowerTwo * 2;
+  }
+  return (((TestNumber % PowerTwo) == 0) ? TRUE: FALSE);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCacheInit.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCacheInit.h
new file mode 100644
index 0000000000..1d2318c770
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCacheInit.h
@@ -0,0 +1,139 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Execution Cache Allocation functions.
+ *
+ * Contains code for doing Execution Cache Allocation for ROM space
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 50472 $   @e \$Date: 2011-04-11 01:57:56 -0600 (Mon, 11 Apr 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_CACHE_INIT_H_
+#define _CPU_CACHE_INIT_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define BSP_STACK_SIZE_64K        65536
+#define BSP_STACK_SIZE_32K        32768
+
+#define CORE0_STACK_SIZE          16384
+#define CORE1_STACK_SIZE          4096
+
+#define AMD_MTRR_FIX4K_BASE     0x268
+#define AMD_MTRR_VARIABLE_BASE6 0x20C
+#define AMD_MTRR_VARIABLE_BASE7 0x20E
+
+#define WP_IO 0x0505050505050505
+
+#define AGESA_CACHE_SIZE_REDUCED              1
+#define AGESA_CACHE_REGIONS_ACROSS_1MB        2
+#define AGESA_CACHE_REGIONS_ACROSS_4GB        3
+#define AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY  4
+#define AGESA_CACHE_START_ADDRESS_LESS_D0000  5
+#define AGESA_THREE_CACHE_REGIONS_ABOVE_1MB   6
+#define AGESA_DEALLOCATE_CACHE_REGIONS        7
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/// Cache-As-Ram Executable region allocation modes
+typedef enum {
+  LimitedByL2Size,                            ///< Execution space must be allocated from L2
+  InfiniteExe,                                ///< Family can support unlimited Execution space
+  MaxCarExeMode                               ///< Used as limit or bounds check
+} CAR_EXE_MODE;
+
+/// Cache Information
+typedef struct {
+  IN       UINT32  BspStackSize;              ///< Stack size of BSP
+  IN       UINT32  Core0StackSize;            ///< Stack size of primary cores
+  IN       UINT32  Core1StackSize;            ///< Stack size of all non primary cores
+  IN       UINT32  MemTrainingBufferSize;     ///< Memory training buffer size
+  IN       UINT32  SharedMemSize;             ///< Shared memory size
+  IN       UINT64  VariableMtrrMask;          ///< Mask to apply before variable MTRR writes
+  IN       UINT64  VariableMtrrHeapMask;      ///< Mask to apply before variable MTRR writes for use in heap init.
+  IN       UINT64  HeapBaseMask;              ///< Mask used for the heap MTRR settings
+  IN CAR_EXE_MODE  CarExeType;                ///< Indicates which algorithm to use when allocating EXE space
+} CACHE_INFO;
+
+/// Merged memory region overlap type
+typedef enum {
+  EmptySet,                                   ///< One of the regions is zero length
+  Disjoint,                                   ///< The two regions do not touch
+  Adjacent,                                   ///< one region is next to the other, no gap
+  CommonEnd,                                  ///< regions overlap with a common end point
+  Extending,                                  ///< the 2nd region is extending the size of the 1st
+  Contained,                                  ///< the 2nd region is wholely contained inside the 1st
+  CommonStartContained,                       ///< the 2nd region is contained in the 1st with a common start
+  Identity,                                   ///< the two regions are the same
+  CommonStartExtending,                       ///< the 2nd region has same start as 1st, but is larger size
+  NotCombinable                               ///< the combined regions do not follow the cache block rules
+} OVERLAP_TYPE;
+
+/// Result of merging two memory regions for cache coverage
+typedef struct {
+  IN OUT  UINT32        MergedStartAddr;      ///< Start address of the merged regions
+  IN OUT  UINT32        MergedSize;           ///< Size of the merged regions
+     OUT  UINT32        OverlapAmount;        ///< the size of the overlapping section
+     OUT  OVERLAP_TYPE  OverlapType;          ///< indicates how the two regions overlap
+} MERGED_CACHE_REGION;
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AllocateExecutionCache (
+  IN AMD_CONFIG_PARAMS *StdHeader,
+  IN EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+  );
+
+#endif  // _CPU_CACHE_INIT_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCoreLeveling.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCoreLeveling.c
new file mode 100644
index 0000000000..ddfeb68fed
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCoreLeveling.c
@@ -0,0 +1,363 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Core Leveling Function.
+ *
+ * Contains code to Level the number of core in a multi-socket system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "AMD.h"
+#include "Topology.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "cpuEarlyInit.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FEATURE_CPUCORELEVELING_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE CoreLevelingFamilyServiceTable;
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+CoreLevelingAtEarly (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          P U B L I C     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should core leveling be enabled
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               core leveling is supported.
+ * @retval       FALSE              core leveling cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsCoreLevelingEnabled (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  CORE_LEVELING_TYPE  CoreLevelMode;
+
+  CoreLevelMode = (CORE_LEVELING_TYPE) PlatformConfig->CoreLevelingMode;
+  if (CoreLevelMode != CORE_LEVEL_NONE) {
+    return (TRUE);
+  } else {
+    return (FALSE);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Performs core leveling for the system.
+ *
+ * This function implements the AMD_CPU_EARLY_PARAMS.CoreLevelingMode parameter.
+ * The possible modes are:
+ *    -0    CORE_LEVEL_LOWEST            Level to lowest common denominator
+ *    -1    CORE_LEVEL_TWO               Level to 2 cores
+ *    -2    CORE_LEVEL_POWER_OF_TWO      Level to 1,2,4 or 8
+ *    -3    CORE_LEVEL_NONE              Do no leveling
+ *    -4    CORE_LEVEL_COMPUTE_UNIT      Level cores to one core per compute unit
+ *
+ * @param[in]  EntryPoint        Timepoint designator.
+ * @param[in]  PlatformConfig    Contains the leveling mode parameter
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ * @return       The most severe status of any family specific service.
+ *
+ */
+AGESA_STATUS
+CoreLevelingAtEarly (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32    CoreNumPerComputeUnit;
+  UINT32    MinNumOfComputeUnit;
+  UINT32    EnabledComputeUnit;
+  UINT32    Socket;
+  UINT32    Module;
+  UINT32    NumberOfSockets;
+  UINT32    NumberOfModules;
+  UINT32    MinCoreCountOnNode;
+  UINT32    MaxCoreCountOnNode;
+  UINT32    LowCore;
+  UINT32    HighCore;
+  UINT32    LeveledCores;
+  UINT32    RequestedCores;
+  UINT32    TotalEnabledCoresOnNode;
+  BOOLEAN   RegUpdated;
+  AP_MAIL_INFO ApMailboxInfo;
+  CORE_LEVELING_TYPE  CoreLevelMode;
+  CPU_CORE_LEVELING_FAMILY_SERVICES  *FamilySpecificServices;
+  WARM_RESET_REQUEST Request;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "CoreLevelingAtEarly\n  CoreLevelMode: %d\n", PlatformConfig->CoreLevelingMode);
+
+  MaxCoreCountOnNode = 0;
+  MinCoreCountOnNode = 0xFFFFFFFF;
+  LeveledCores = 0;
+  CoreNumPerComputeUnit = 1;
+  MinNumOfComputeUnit = 0xFF;
+
+  ASSERT (PlatformConfig->CoreLevelingMode < CoreLevelModeMax);
+
+  // Get OEM IO core level mode
+  CoreLevelMode = (CORE_LEVELING_TYPE) PlatformConfig->CoreLevelingMode;
+
+  // Get socket count
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+  GetApMailbox (&ApMailboxInfo.Info, StdHeader);
+  NumberOfModules = ApMailboxInfo.Fields.ModuleType + 1;
+
+  // Collect cpu core info
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      for (Module = 0; Module < NumberOfModules; Module++) {
+        if (GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader)) {
+          // Get the highest and lowest core count in all nodes
+          TotalEnabledCoresOnNode = HighCore - LowCore + 1;
+          if (TotalEnabledCoresOnNode < MinCoreCountOnNode) {
+            MinCoreCountOnNode = TotalEnabledCoresOnNode;
+          }
+          if (TotalEnabledCoresOnNode > MaxCoreCountOnNode) {
+            MaxCoreCountOnNode = TotalEnabledCoresOnNode;
+          }
+          EnabledComputeUnit = TotalEnabledCoresOnNode;
+          switch (GetComputeUnitMapping (StdHeader)) {
+          case AllCoresMapping:
+            // All cores are in their own compute unit.
+            break;
+          case EvenCoresMapping:
+            // Cores are paired in compute units.
+            CoreNumPerComputeUnit = 2;
+            EnabledComputeUnit = (TotalEnabledCoresOnNode / 2);
+            break;
+          default:
+            ASSERT (FALSE);
+          }
+          // Get minimum of compute unit.  This will either be the minimum number of cores (AllCoresMapping),
+          // or less (EvenCoresMapping).
+          if (EnabledComputeUnit < MinNumOfComputeUnit) {
+            MinNumOfComputeUnit = EnabledComputeUnit;
+          }
+          IDS_HDT_CONSOLE (CPU_TRACE, "  Socket %d Module %d MaxCoreCountOnNode %d MinCoreCountOnNode %d TotalEnabledCoresOnNode %d EnabledComputeUnit %d MinNumOfComputeUnit %d\n", \
+                                      Socket, Module, MaxCoreCountOnNode, MinCoreCountOnNode, TotalEnabledCoresOnNode, EnabledComputeUnit, MinNumOfComputeUnit);
+        }
+      }
+    }
+  }
+
+  // Get LeveledCores
+  switch (CoreLevelMode) {
+  case CORE_LEVEL_LOWEST:
+    if (MinCoreCountOnNode == MaxCoreCountOnNode) {
+      return (AGESA_SUCCESS);
+    }
+    LeveledCores = (MinCoreCountOnNode / CoreNumPerComputeUnit) * CoreNumPerComputeUnit;
+    break;
+  case CORE_LEVEL_TWO:
+    LeveledCores = 2 / NumberOfModules;
+    if (LeveledCores != 0) {
+      LeveledCores = (LeveledCores <= MinCoreCountOnNode) ? LeveledCores : MinCoreCountOnNode;
+    } else {
+      return (AGESA_WARNING);
+    }
+    if ((LeveledCores * NumberOfModules) != 2) {
+      PutEventLog (
+      AGESA_WARNING,
+      CPU_WARNING_ADJUSTED_LEVELING_MODE,
+      2, (LeveledCores * NumberOfModules), 0, 0, StdHeader
+      );
+    }
+    break;
+  case CORE_LEVEL_POWER_OF_TWO:
+    // Level to power of 2 (1, 2, 4, 8...)
+    LeveledCores = 1;
+    while (MinCoreCountOnNode >= (LeveledCores * 2)) {
+      LeveledCores = LeveledCores * 2;
+    }
+    break;
+  case CORE_LEVEL_COMPUTE_UNIT:
+    // Level cores to one core per compute unit, with additional reduction to level
+    // all processors to match the processor with the minimum number of cores.
+    if (CoreNumPerComputeUnit == 1) {
+      // If there is one core per compute unit, this is the same as CORE_LEVEL_LOWEST.
+      if (MinCoreCountOnNode == MaxCoreCountOnNode) {
+        return (AGESA_SUCCESS);
+      }
+      LeveledCores = MinCoreCountOnNode;
+    } else {
+      // If there are more than one core per compute unit, level to the number of compute units.
+      LeveledCores = MinNumOfComputeUnit;
+    }
+    break;
+  case CORE_LEVEL_ONE:
+    LeveledCores = 1;
+    if (NumberOfModules > 1) {
+      PutEventLog (
+      AGESA_WARNING,
+      CPU_WARNING_ADJUSTED_LEVELING_MODE,
+      1, NumberOfModules, 0, 0, StdHeader
+      );
+    }
+    break;
+  case CORE_LEVEL_THREE:
+  case CORE_LEVEL_FOUR:
+  case CORE_LEVEL_FIVE:
+  case CORE_LEVEL_SIX:
+  case CORE_LEVEL_SEVEN:
+  case CORE_LEVEL_EIGHT:
+  case CORE_LEVEL_NINE:
+  case CORE_LEVEL_TEN:
+  case CORE_LEVEL_ELEVEN:
+  case CORE_LEVEL_TWELVE:
+  case CORE_LEVEL_THIRTEEN:
+  case CORE_LEVEL_FOURTEEN:
+  case CORE_LEVEL_FIFTEEN:
+    // MCM processors can not have an odd number of cores. For an odd CORE_LEVEL_N, MCM processors will be
+    // leveled as though CORE_LEVEL_N+1 was chosen.
+    // Processors with compute units disable all cores in an entire compute unit at a time, or on an MCM processor,
+    // two compute units at a time. For example, on an SCM processor with two cores per compute unit, the effective
+    // explicit levels are CORE_LEVEL_ONE, CORE_LEVEL_TWO, CORE_LEVEL_FOUR, CORE_LEVEL_SIX, and
+    // CORE_LEVEL_EIGHT. The same example for an MCM processor with two cores per compute unit has effective
+    // explicit levels of CORE_LEVEL_TWO, CORE_LEVEL_FOUR, CORE_LEVEL_EIGHT, and CORE_LEVEL_TWELVE.
+    RequestedCores = CoreLevelMode - CORE_LEVEL_THREE + 3;
+    LeveledCores = (RequestedCores + NumberOfModules - 1) / NumberOfModules;
+    LeveledCores = (LeveledCores / CoreNumPerComputeUnit) * CoreNumPerComputeUnit;
+    LeveledCores = (LeveledCores <= MinCoreCountOnNode) ? LeveledCores : MinCoreCountOnNode;
+    if (LeveledCores != 1) {
+      LeveledCores = (LeveledCores / CoreNumPerComputeUnit) * CoreNumPerComputeUnit;
+    }
+    if ((LeveledCores * NumberOfModules * CoreNumPerComputeUnit) != RequestedCores) {
+      PutEventLog (
+      AGESA_WARNING,
+      CPU_WARNING_ADJUSTED_LEVELING_MODE,
+      RequestedCores, (LeveledCores * NumberOfModules * CoreNumPerComputeUnit), 0, 0, StdHeader
+      );
+    }
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+
+  // Set down core register
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      GetFeatureServicesOfSocket (&CoreLevelingFamilyServiceTable, Socket, (CONST VOID **)&FamilySpecificServices, StdHeader);
+      if (FamilySpecificServices != NULL) {
+        for (Module = 0; Module < NumberOfModules; Module++) {
+          IDS_HDT_CONSOLE (CPU_TRACE, "  SetDownCoreRegister: Socket %d Module %d LeveledCores %d CoreLevelMode %d\n", Socket, Module, LeveledCores, CoreLevelMode);
+          RegUpdated = FamilySpecificServices->SetDownCoreRegister (FamilySpecificServices, &Socket, &Module, &LeveledCores, CoreLevelMode, StdHeader);
+          // If the down core register is updated, trigger a warm reset.
+          if (RegUpdated) {
+            GetWarmResetFlag (StdHeader, &Request);
+            Request.RequestBit = TRUE;
+            Request.StateBits = Request.PostStage - 1;
+            IDS_HDT_CONSOLE (CPU_TRACE, "  Request a warm reset.\n");
+            SetWarmResetFlag (StdHeader, &Request);
+          }
+        }
+      }
+    }
+  }
+
+  return (AGESA_SUCCESS);
+}
+
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCoreLeveling =
+{
+  CoreLeveling,
+  (CPU_FEAT_AFTER_PM_INIT),
+  IsCoreLevelingEnabled,
+  CoreLevelingAtEarly
+};
+
+/*----------------------------------------------------------------------------------------
+ *                          L O C A L      F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCpb.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCpb.c
new file mode 100644
index 0000000000..1aa82e6c66
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCpb.c
@@ -0,0 +1,176 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Core performance boost feature support code.
+ *
+ * Contains code that declares the AGESA CPU CPB related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "cpuCpb.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUCPB_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE CpbFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should CPB be enabled
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               CPB is supported.
+ * @retval       FALSE              CPB cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsCpbFeatureEnabled (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32              Socket;
+  BOOLEAN             IsEnabled;
+  CPB_FAMILY_SERVICES *FamilyServices;
+
+  IsEnabled = FALSE;
+
+  ASSERT (PlatformConfig->CpbMode < MaxCpbMode);
+
+  if (PlatformConfig->CpbMode == CpbModeAuto) {
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (IsProcessorPresent (Socket, StdHeader)) {
+        GetFeatureServicesOfSocket (&CpbFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+        if (FamilyServices != NULL) {
+          if (FamilyServices->IsCpbSupported (FamilyServices, PlatformConfig, Socket, StdHeader)) {
+            IsEnabled = TRUE;
+            break;
+          }
+        }
+      }
+    }
+  }
+  return IsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable core performance boost
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeCpbFeature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32              Socket;
+  AGESA_STATUS        AgesaStatus;
+  AGESA_STATUS        CalledStatus;
+  CPB_FAMILY_SERVICES *FamilyServices;
+
+  AgesaStatus = AGESA_SUCCESS;
+  CalledStatus = AGESA_SUCCESS;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "    Boost is enabled\n");
+
+  for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      GetFeatureServicesOfSocket (&CpbFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+      if (FamilyServices != NULL) {
+        if (FamilyServices->IsCpbSupported (FamilyServices, PlatformConfig, Socket, StdHeader)) {
+          CalledStatus = FamilyServices->EnableCpbOnSocket (FamilyServices, PlatformConfig, EntryPoint, Socket, StdHeader);
+          if (CalledStatus > AgesaStatus) {
+            AgesaStatus = CalledStatus;
+          }
+        }
+      }
+    }
+  }
+
+  return AgesaStatus;
+}
+
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCpb =
+{
+  CoreBoost,
+  (CPU_FEAT_BEFORE_PM_INIT | CPU_FEAT_AFTER_PM_INIT | CPU_FEAT_INIT_LATE_END | CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_S3_LATE_RESTORE_END | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+  IsCpbFeatureEnabled,
+  InitializeCpbFeature
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCpb.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCpb.h
new file mode 100644
index 0000000000..29f00ffedd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuCpb.h
@@ -0,0 +1,134 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Core Performance Boost Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU CPB related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_CPB_H_
+#define _CPU_CPB_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+//  Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (CPB_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if CPB is supported.
+ *
+ * @param[in]    CpbServices        Core Performance Boost services.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    Socket             Zero-based socket number.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               CPB is supported.
+ * @retval       FALSE              CPB is not supported.
+ *
+ */
+typedef BOOLEAN F_CPB_IS_SUPPORTED (
+  IN       CPB_FAMILY_SERVICES    *CpbServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       UINT32                 Socket,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPB_IS_SUPPORTED *PF_CPB_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to enable CPB.
+ *
+ * @param[in]    CpbServices        Core Performance Boost services.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    Socket             Zero-based socket number.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_CPB_INIT (
+  IN       CPB_FAMILY_SERVICES    *CpbServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       UINT64                 EntryPoint,
+  IN       UINT32                 Socket,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPB_INIT *PF_CPB_INIT;
+
+/**
+ * Provide the interface to the CPB Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _CPB_FAMILY_SERVICES {
+  UINT16          Revision;                                             ///< Interface version
+  // Public Methods.
+  PF_CPB_IS_SUPPORTED IsCpbSupported;                                   ///< Method: Family specific call to check if CPB is supported.
+  PF_CPB_INIT         EnableCpbOnSocket;                                ///< Method: Family specific call to enable CPB.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ *                          F U N C T I O N S     P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _CPU_CPB_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuDmi.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuDmi.c
new file mode 100644
index 0000000000..5619df3797
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuDmi.c
@@ -0,0 +1,862 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD DMI Record Creation API, and related functions.
+ *
+ * Contains code that produce the DMI related information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 60539 $   @e \$Date: 2011-10-17 17:11:05 -0600 (Mon, 17 Oct 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionDmi.h"
+#include "cpuLateInit.h"
+#include "cpuServices.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "Ids.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUDMI_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_DMI_CONFIGURATION    OptionDmiConfiguration;  // global user config record
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT16
+STATIC
+AdjustGranularity (
+  IN UINT32 *CacheSizePtr
+  );
+
+VOID
+STATIC
+IntToString (
+  IN OUT   CHAR8 *String,
+  IN       UINT8 *Integer,
+  IN       UINT8 SizeInByte
+);
+
+AGESA_STATUS
+GetDmiInfoStub (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   DMI_INFO              **DmiTable
+  );
+
+AGESA_STATUS
+GetDmiInfoMain (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   DMI_INFO              **DmiTable
+  );
+
+AGESA_STATUS
+ReleaseDmiBufferStub (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+AGESA_STATUS
+ReleaseDmiBuffer (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  CreateDmiRecords
+ *
+ *  Description:
+ *     This function creates DMI/SMBios records pertinent to the processor
+ *     SMBIOS type 4, type 7, and type 40.
+ *
+ *  Parameters:
+ *    @param[in, out]  *StdHeader
+ *    @param[in, out]  **DmiTable
+ *
+ *    @retval         AGESA_STATUS
+ *
+ */
+
+AGESA_STATUS
+CreateDmiRecords (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   DMI_INFO              **DmiTable
+  )
+{
+  AGESA_TESTPOINT (TpProcCpuEntryDmi, StdHeader);
+  return ((*(OptionDmiConfiguration.DmiFeature)) (StdHeader, DmiTable));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  GetDmiInfoStub
+ *
+ *  Description:
+ *     This is the default routine for use when the DMI option is NOT requested.
+ *      The option install process will create and fill the transfer vector with
+ *      the address of the proper routine (Main or Stub). The link optimizer will
+ *      strip out of the .DLL the routine that is not used.
+ *
+ *  Parameters:
+ *    @param[in, out]    *StdHeader
+ *    @param[in, out]    **DmiTable
+ *
+ *    @retval         AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+GetDmiInfoStub (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   DMI_INFO              **DmiTable
+  )
+{
+  return  AGESA_UNSUPPORTED;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  GetDmiInfoMain
+ *
+ *  Description:
+ *     This is the common routine for getting Dmi type4 and type7 CPU related information.
+ *
+ *  Parameters:
+ *    @param[in, out]  *StdHeader
+ *    @param[in, out]  **DmiTable
+ *
+ *    @retval         AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+GetDmiInfoMain (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   DMI_INFO              **DmiTable
+  )
+{
+  UINT8  Socket;
+  UINT8  Channel;
+  UINT8  Dimm;
+  UINT16 Index;
+  UINT16 DimmIndex;
+  UINT16 NumberOfDimm;
+  UINT32 MaxCapacity;
+  UINT64 MsrData;
+  UINT64 LocalMsrRegister;
+  BOOLEAN FamilyNotFound;
+  AGESA_STATUS Flag;
+  AGESA_STATUS CalledStatus;
+  AP_EXE_PARAMS ApParams;
+  MEM_DMI_INFO *MemInfo;
+  DMI_T17_MEMORY_TYPE MemType;
+  DMI_INFO *DmiBufferPtr;
+  ALLOCATE_HEAP_PARAMS AllocateHeapParams;
+  LOCATE_HEAP_PTR LocateHeapParams;
+  CPU_LOGICAL_ID LogicalId;
+  PROC_FAMILY_TABLE *ProcData;
+  CPU_GET_MEM_INFO CpuGetMemInfo;
+
+  MsrData = 0;
+  Flag = TRUE;
+  ProcData = NULL;
+  MemInfo = NULL;
+  DmiBufferPtr = *DmiTable;
+  FamilyNotFound = TRUE;
+
+  GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+  for (Index = 0; Index < OptionDmiConfiguration.NumEntries; Index++) {
+    ProcData = (PROC_FAMILY_TABLE *) ((*OptionDmiConfiguration.FamilyList)[Index]);
+    if ((ProcData->ProcessorFamily & LogicalId.Family) != 0) {
+      FamilyNotFound = FALSE;
+      break;
+    }
+  }
+
+  if (FamilyNotFound) {
+    return AGESA_ERROR;
+  }
+
+  if (DmiBufferPtr == NULL) {
+    //
+    // Allocate a buffer by heap function
+    //
+    AllocateHeapParams.BufferHandle = AMD_DMI_INFO_BUFFER_HANDLE;
+    AllocateHeapParams.RequestedBufferSize = sizeof (DMI_INFO);
+    AllocateHeapParams.Persist = HEAP_SYSTEM_MEM;
+
+    if (HeapAllocateBuffer (&AllocateHeapParams, StdHeader) != AGESA_SUCCESS) {
+      return AGESA_ERROR;
+    }
+
+    DmiBufferPtr = (DMI_INFO *) AllocateHeapParams.BufferPtr;
+    *DmiTable = DmiBufferPtr;
+  }
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "  DMI is enabled\n");
+
+  // Fill with 0x00
+  LibAmdMemFill (DmiBufferPtr, 0x00, sizeof (DMI_INFO), StdHeader);
+
+  //
+  // Get CPU information
+  //
+
+  // Run GetType4Type7Info on all core0s.
+  ApParams.StdHeader = *StdHeader;
+  ApParams.FunctionNumber = AP_LATE_TASK_GET_TYPE4_TYPE7;
+  ApParams.RelatedDataBlock = (VOID *) DmiBufferPtr;
+  ApParams.RelatedBlockLength = sizeof (DMI_INFO);
+  CalledStatus = RunLateApTaskOnAllCore0s (&ApParams, StdHeader);
+  if (CalledStatus > Flag) {
+    Flag = CalledStatus;
+  }
+  CalledStatus = GetType4Type7Info (&ApParams);
+  if (CalledStatus > Flag) {
+    Flag = CalledStatus;
+  }
+
+  //------------------------------
+  // T Y P E 16 17 19 20
+  //------------------------------
+
+  LocateHeapParams.BufferHandle = AMD_DMI_MEM_DEV_INFO_HANDLE;
+  if (HeapLocateBuffer (&LocateHeapParams, StdHeader) != AGESA_SUCCESS) {
+    if (Flag < AGESA_ERROR) {
+      Flag = AGESA_ERROR;
+    }
+  } else {
+    NumberOfDimm = *((UINT16 *) (LocateHeapParams.BufferPtr));
+    MemType = *((DMI_T17_MEMORY_TYPE *) ((UINT8 *) (LocateHeapParams.BufferPtr) + 6));
+    MemInfo = (MEM_DMI_INFO *) ((UINT8 *) (LocateHeapParams.BufferPtr) + 6 + sizeof (DMI_T17_MEMORY_TYPE));
+    // TYPE 16
+    DmiBufferPtr->T16.Location = 0x03;
+    DmiBufferPtr->T16.Use = 0x03;
+
+    // Gather memory information
+    ProcData->DmiGetMemInfo (&CpuGetMemInfo, StdHeader);
+
+    if (CpuGetMemInfo.EccCapable) {
+      DmiBufferPtr->T16.MemoryErrorCorrection = Dmi16MultiBitEcc;
+    } else {
+      DmiBufferPtr->T16.MemoryErrorCorrection = Dmi16NoneErrCorrection;
+    }
+
+    MaxCapacity = *((UINT32 *) ((UINT8 *) (LocateHeapParams.BufferPtr) + 2));
+    // For the total size >= 2TB case, we need leave MaximumCapacity (offset 07h) to 80000000h
+    // and fill the size in bytes into ExtMaxCapacity (offset 0Fh).
+    if (MaxCapacity < 0x200000) {
+    DmiBufferPtr->T16.MaximumCapacity = MaxCapacity << 10;
+      DmiBufferPtr->T16.ExtMaxCapacity = 0;
+    } else {
+      DmiBufferPtr->T16.MaximumCapacity = 0x80000000;
+      DmiBufferPtr->T16.ExtMaxCapacity = (UINT64) MaxCapacity << 20;
+    }
+
+    DmiBufferPtr->T16.NumberOfMemoryDevices = NumberOfDimm;
+
+    // TYPE 17
+    for (DimmIndex = 0; DimmIndex < NumberOfDimm; DimmIndex++) {
+      Socket = (MemInfo + DimmIndex)->Socket;
+      Channel = (MemInfo + DimmIndex)->Channel;
+      Dimm = (MemInfo + DimmIndex)->Dimm;
+
+      DmiBufferPtr->T17[Socket][Channel][Dimm].TotalWidth = (MemInfo + DimmIndex)->TotalWidth;
+      DmiBufferPtr->T17[Socket][Channel][Dimm].DataWidth = (MemInfo + DimmIndex)->DataWidth;
+      DmiBufferPtr->T17[Socket][Channel][Dimm].MemorySize = (MemInfo + DimmIndex)->MemorySize;
+      DmiBufferPtr->T17[Socket][Channel][Dimm].FormFactor = (MemInfo + DimmIndex)->FormFactor;
+      DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceSet = 0;
+
+      DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[0] = 'D';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[1] = 'I';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[2] = 'M';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[3] = 'M';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[4] = ' ';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[5] = Dimm + 0x30;
+      DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[6] = '\0';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[7] = '\0';
+
+      DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[0] = 'C';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[1] = 'H';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[2] = 'A';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[3] = 'N';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[4] = 'N';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[5] = 'E';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[6] = 'L';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[7] = ' ';
+      DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[8] = Channel + 0x41;
+      DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[9] = '\0';
+
+      DmiBufferPtr->T17[Socket][Channel][Dimm].MemoryType = MemType;
+      DmiBufferPtr->T17[Socket][Channel][Dimm].TypeDetail.Synchronous = 1;
+      DmiBufferPtr->T17[Socket][Channel][Dimm].Speed = (MemInfo + DimmIndex)->Speed;
+
+      DmiBufferPtr->T17[Socket][Channel][Dimm].ManufacturerIdCode = (MemInfo + DimmIndex)->ManufacturerIdCode;
+
+      IntToString (DmiBufferPtr->T17[Socket][Channel][Dimm].SerialNumber, (MemInfo + DimmIndex)->SerialNumber, (sizeof DmiBufferPtr->T17[Socket][Channel][Dimm].SerialNumber - 1) / 2);
+
+      LibAmdMemCopy (&DmiBufferPtr->T17[Socket][Channel][Dimm].PartNumber, &(MemInfo + DimmIndex)->PartNumber, sizeof (DmiBufferPtr->T17[Socket][Channel][Dimm].PartNumber), StdHeader);
+      DmiBufferPtr->T17[Socket][Channel][Dimm].PartNumber[18] = 0;
+
+      DmiBufferPtr->T17[Socket][Channel][Dimm].Attributes = (MemInfo + DimmIndex)->Attributes;
+      DmiBufferPtr->T17[Socket][Channel][Dimm].ExtSize = (MemInfo + DimmIndex)->ExtSize;
+      DmiBufferPtr->T17[Socket][Channel][Dimm].ConfigSpeed = (MemInfo + DimmIndex)->ConfigSpeed;
+
+      //TYPE 20
+      DmiBufferPtr->T20[Socket][Channel][Dimm].StartingAddr = (MemInfo + DimmIndex)->StartingAddr;
+      DmiBufferPtr->T20[Socket][Channel][Dimm].EndingAddr = (MemInfo + DimmIndex)->EndingAddr;
+      // Partition Row Position - 2 for single channel memory
+      //                          0 for dual channel memory
+      DmiBufferPtr->T20[Socket][Channel][Dimm].PartitionRowPosition = CpuGetMemInfo.PartitionRowPosition;
+      DmiBufferPtr->T20[Socket][Channel][Dimm].InterleavePosition = 0xFF;
+      DmiBufferPtr->T20[Socket][Channel][Dimm].InterleavedDataDepth = 0xFF;
+      DmiBufferPtr->T20[Socket][Channel][Dimm].ExtStartingAddr = (MemInfo + DimmIndex)->ExtStartingAddr;
+      DmiBufferPtr->T20[Socket][Channel][Dimm].ExtEndingAddr = (MemInfo + DimmIndex)->ExtEndingAddr;
+    }
+
+    // TYPE 19
+    DmiBufferPtr->T19.StartingAddr = 0;
+    DmiBufferPtr->T19.ExtStartingAddr = 0;
+    DmiBufferPtr->T19.ExtEndingAddr = 0;
+
+    // If Ending Address >= 0xFFFFFFFF, update Starting Address (offset 04h) & Ending Address (offset 08h) to 0xFFFFFFFF,
+    // and use the Extended Starting Address (offset 0Fh) & Extended Ending Address (offset 17h) instead.
+    LibAmdMsrRead (TOP_MEM2, &LocalMsrRegister, StdHeader);
+    if (LocalMsrRegister == 0) {
+      LibAmdMsrRead (TOP_MEM, &LocalMsrRegister, StdHeader);
+      DmiBufferPtr->T19.EndingAddr = (UINT32) (LocalMsrRegister >> 10);
+    } else {
+      if ((LocalMsrRegister >> 10) >= (UINT64) 0xFFFFFFFF) {
+        DmiBufferPtr->T19.StartingAddr = 0xFFFFFFFF;
+        DmiBufferPtr->T19.EndingAddr = 0xFFFFFFFF;
+        DmiBufferPtr->T19.ExtEndingAddr = LocalMsrRegister;
+      } else {
+      DmiBufferPtr->T19.EndingAddr = (UINT32) (LocalMsrRegister >> 10);
+    }
+    }
+
+    DmiBufferPtr->T19.PartitionWidth = 0xFF;
+  }
+  return (Flag);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  GetType4Type7Info
+ *
+ *  Description:
+ *    This routine should be run on core 0 of every socket. It creates DMI type 4 and type 7 tables.
+ *
+ *  Parameters:
+ *    @param[in] ApExeParams   Handle to config for library and services.
+ *
+ *    @retval         AGESA_STATUS
+ *
+ *  Processing:
+ *
+ */
+AGESA_STATUS
+GetType4Type7Info (
+  IN       AP_EXE_PARAMS *ApExeParams
+  )
+{
+  UINT8  ByteIndexInUint64;
+  UINT16 Index;
+  UINT32 SocketNum;
+  UINT32 CacheSize;
+  UINT32 IgnoredModule;
+  UINT32 IgnoredCore;
+  UINT64 MsrData;
+  DMI_INFO *DmiBufferPtr;
+  AGESA_STATUS IgnoredSts;
+  AGESA_STATUS Flag;
+  BOOLEAN FamilyNotFound;
+  CPUID_DATA CpuId;
+  CPU_TYPE_INFO CpuInfo;
+  PROC_FAMILY_TABLE   *ProcData;
+  CPU_LOGICAL_ID LogicalID;
+  UINT8  L3Associativity;
+
+  Flag = TRUE;
+  DmiBufferPtr = (DMI_INFO *) ApExeParams->RelatedDataBlock;
+  GetLogicalIdOfCurrentCore (&LogicalID, &ApExeParams->StdHeader);
+
+  ProcData = NULL;
+  FamilyNotFound = TRUE;
+  for (Index = 0; Index < OptionDmiConfiguration.NumEntries; Index++) {
+    ProcData = (PROC_FAMILY_TABLE *) ((*OptionDmiConfiguration.FamilyList)[Index]);
+    if ((ProcData->ProcessorFamily & LogicalID.Family) != 0) {
+      FamilyNotFound = FALSE;
+      break;
+    }
+  }
+
+  if (FamilyNotFound) {
+    return AGESA_ERROR;
+  }
+
+  ProcData->DmiGetCpuInfo (&CpuInfo, &ApExeParams->StdHeader);
+
+  // ------------------------------
+  // T Y P E 4
+  // ------------------------------
+
+  IdentifyCore (&ApExeParams->StdHeader, &SocketNum, &IgnoredModule, &IgnoredCore, &IgnoredSts);
+
+  // Type 4 Offset 0x05, Processor Type
+  DmiBufferPtr->T4[SocketNum].T4ProcType = CENTRAL_PROCESSOR;
+
+  // Type 4 Offset 0x06, Processor Family
+  ProcData->DmiGetT4ProcFamily (&DmiBufferPtr->T4[SocketNum].T4ProcFamily, ProcData, &CpuInfo, &ApExeParams->StdHeader);
+
+  if (DmiBufferPtr->T4[SocketNum].T4ProcFamily == P_UPGRADE_UNKNOWN) {
+    Flag = AGESA_ERROR;
+  }
+
+  // Type4 Offset 0x08, Processor ID
+  LibAmdCpuidRead (AMD_CPUID_APICID_LPC_BID, &CpuId, &ApExeParams->StdHeader);
+  DmiBufferPtr->T4[SocketNum].T4ProcId.ProcIdLsd = CpuId.EAX_Reg;
+  DmiBufferPtr->T4[SocketNum].T4ProcId.ProcIdMsd = CpuId.EDX_Reg;
+
+  // Type4 Offset 0x11, Voltage
+  DmiBufferPtr->T4[SocketNum].T4Voltage = ProcData->DmiGetVoltage (&ApExeParams->StdHeader);
+
+  // Type4 Offset 0x12, External Clock
+  DmiBufferPtr->T4[SocketNum].T4ExternalClock = ProcData->DmiGetExtClock (&ApExeParams->StdHeader);
+
+  // Type4 Offset 0x14, Max Speed
+  DmiBufferPtr->T4[SocketNum].T4MaxSpeed = ProcData->DmiGetMaxSpeed (&ApExeParams->StdHeader);
+
+  // Type4 Offset 0x16, Current Speed
+  DmiBufferPtr->T4[SocketNum].T4CurrentSpeed = DmiBufferPtr->T4[SocketNum].T4MaxSpeed;
+
+  // Type4 Offset 0x18, Status
+  DmiBufferPtr->T4[SocketNum].T4Status = SOCKET_POPULATED | CPU_STATUS_ENABLED;
+
+  // Type4 Offset 0x19, Processor Upgrade
+  DmiBufferPtr->T4[SocketNum].T4ProcUpgrade = CpuInfo.ProcUpgrade;
+
+  // Type4 Offset 0x23, 0x24 and 0x25, Core Count, Core Enabled and Thread Count
+  DmiBufferPtr->T4[SocketNum].T4CoreCount   = CpuInfo.TotalCoreNumber + 1;
+  DmiBufferPtr->T4[SocketNum].T4CoreEnabled = CpuInfo.EnabledCoreNumber + 1;
+  DmiBufferPtr->T4[SocketNum].T4ThreadCount = CpuInfo.EnabledCoreNumber + 1;
+
+  // Type4 Offset 0x26, Processor Characteristics
+  DmiBufferPtr->T4[SocketNum].T4ProcCharacteristics = P_CHARACTERISTICS;
+
+  // Type4 Offset 0x28, Processor Family 2
+  DmiBufferPtr->T4[SocketNum].T4ProcFamily2 = DmiBufferPtr->T4[SocketNum].T4ProcFamily;
+
+  // Type4 ProcVersion
+  for (Index = 0; Index <= 5; Index++) {
+    LibAmdMsrRead ((MSR_CPUID_NAME_STRING0 + Index), &MsrData, &ApExeParams->StdHeader);
+    for (ByteIndexInUint64 = 0; ByteIndexInUint64 <= 7; ByteIndexInUint64++) {
+      DmiBufferPtr->T4[SocketNum].T4ProcVersion[Index * 8 + ByteIndexInUint64] = (UINT8) (MsrData >> (8 * ByteIndexInUint64));
+    }
+  }
+
+  //------------------------------
+  // T Y P E 7
+  //------------------------------
+
+  // Type7 Offset 0x05, Cache Configuration
+  DmiBufferPtr->T7L1[SocketNum].T7CacheCfg = CACHE_CFG_L1;
+  DmiBufferPtr->T7L2[SocketNum].T7CacheCfg = CACHE_CFG_L2;
+  DmiBufferPtr->T7L3[SocketNum].T7CacheCfg = CACHE_CFG_L3;
+
+  // Type7 Offset 0x07 and 09, Maximum Cache Size and Installed Size
+
+  // Maximum L1 cache size
+  DmiBufferPtr->T7L1[SocketNum].T7MaxCacheSize = AdjustGranularity (&CpuInfo.L1CacheSize);
+
+  // Installed L1 cache size
+  DmiBufferPtr->T7L1[SocketNum].T7InstallSize = DmiBufferPtr->T7L1[SocketNum].T7MaxCacheSize;
+
+  // Maximum L2 cache size
+  DmiBufferPtr->T7L2[SocketNum].T7MaxCacheSize = AdjustGranularity (&CpuInfo.L2CacheSize);
+
+  // Installed L2 cache size
+  DmiBufferPtr->T7L2[SocketNum].T7InstallSize = DmiBufferPtr->T7L2[SocketNum].T7MaxCacheSize;
+
+  // Maximum L3 cache size
+  LibAmdCpuidRead (AMD_CPUID_L2L3Cache_L2TLB, &CpuId, &ApExeParams->StdHeader);
+  CacheSize = ((CpuId.EDX_Reg >> 18) & 0x3FFF) * 512;
+  DmiBufferPtr->T7L3[SocketNum].T7MaxCacheSize = AdjustGranularity (&CacheSize);
+
+  // Installed L3 cache size
+  DmiBufferPtr->T7L3[SocketNum].T7InstallSize = DmiBufferPtr->T7L3[SocketNum].T7MaxCacheSize;
+
+  // Type7 Offset 0x0B and 0D, Supported SRAM Type and Current SRAM Type
+  DmiBufferPtr->T7L1[SocketNum].T7SupportedSramType = SRAM_TYPE;
+  DmiBufferPtr->T7L1[SocketNum].T7CurrentSramType = SRAM_TYPE;
+  DmiBufferPtr->T7L2[SocketNum].T7SupportedSramType = SRAM_TYPE;
+  DmiBufferPtr->T7L2[SocketNum].T7CurrentSramType = SRAM_TYPE;
+  DmiBufferPtr->T7L3[SocketNum].T7SupportedSramType = SRAM_TYPE;
+  DmiBufferPtr->T7L3[SocketNum].T7CurrentSramType = SRAM_TYPE;
+
+  // Type7 Offset 0x0F, Cache Speed
+  DmiBufferPtr->T7L1[SocketNum].T7CacheSpeed = 1;
+  DmiBufferPtr->T7L2[SocketNum].T7CacheSpeed = 1;
+  DmiBufferPtr->T7L3[SocketNum].T7CacheSpeed = 1;
+
+  // Type7 Offset 0x10, Error Correction Type
+  DmiBufferPtr->T7L1[SocketNum].T7ErrorCorrectionType = ERR_CORRECT_TYPE;
+  DmiBufferPtr->T7L2[SocketNum].T7ErrorCorrectionType = ERR_CORRECT_TYPE;
+  DmiBufferPtr->T7L3[SocketNum].T7ErrorCorrectionType = ERR_CORRECT_TYPE;
+
+  // Type7 Offset 0x11, System Cache Type
+  DmiBufferPtr->T7L1[SocketNum].T7SystemCacheType = CACHE_TYPE;
+  DmiBufferPtr->T7L2[SocketNum].T7SystemCacheType = CACHE_TYPE;
+  DmiBufferPtr->T7L3[SocketNum].T7SystemCacheType = CACHE_TYPE;
+
+  // Type7 Offset 0x12, Associativity
+  DmiBufferPtr->T7L1[SocketNum].T7Associativity = ASSOCIATIVE_2_WAY;
+  DmiBufferPtr->T7L2[SocketNum].T7Associativity = ASSOCIATIVE_16_WAY;
+
+  L3Associativity = (UINT8) ((CpuId.EDX_Reg >> 12) & 0x0F);
+
+  switch (L3Associativity)
+  {
+  case (CPUID_ASSOCIATIVITY_2_WAY):
+    DmiBufferPtr->T7L3[SocketNum].T7Associativity = ASSOCIATIVE_2_WAY;
+    break;
+  case (CPUID_ASSOCIATIVITY_4_WAY):
+    DmiBufferPtr->T7L3[SocketNum].T7Associativity = ASSOCIATIVE_4_WAY;
+    break;
+  case (CPUID_ASSOCIATIVITY_8_WAY):
+    DmiBufferPtr->T7L3[SocketNum].T7Associativity = ASSOCIATIVE_8_WAY;
+    break;
+  case (CPUID_ASSOCIATIVITY_16_WAY):
+    DmiBufferPtr->T7L3[SocketNum].T7Associativity = ASSOCIATIVE_16_WAY;
+    break;
+  case (CPUID_ASSOCIATIVITY_32_WAY):
+    DmiBufferPtr->T7L3[SocketNum].T7Associativity = ASSOCIATIVE_32_WAY;
+    break;
+  case (CPUID_ASSOCIATIVITY_48_WAY):
+    DmiBufferPtr->T7L3[SocketNum].T7Associativity = ASSOCIATIVE_48_WAY;
+    break;
+  case (CPUID_ASSOCIATIVITY_64_WAY):
+    DmiBufferPtr->T7L3[SocketNum].T7Associativity = ASSOCIATIVE_64_WAY;
+    break;
+  case (CPUID_ASSOCIATIVITY_96_WAY):
+  case (CPUID_ASSOCIATIVITY_128_WAY):
+  default:
+    DmiBufferPtr->T7L3[SocketNum].T7Associativity = ASSOCIATIVE_OTHER;
+    break;
+  }
+
+  return (Flag);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  DmiGetT4ProcFamilyFromBrandId
+ *
+ *  Description:
+ *     This is the common routine for getting Type 4 processor family information from brand ID
+ *
+ *  Parameters:
+ *    @param[in, out]    *T4ProcFamily           Pointer to type 4 processor family information
+ *    @param[in]         *CpuDmiProcFamilyTable  Pointer to DMI family special service
+ *    @param[in]         *CpuInfo                Pointer to CPU_TYPE_INFO struct
+ *    @param[in, out]    *StdHeader              Standard Head Pointer
+ *
+ *    @retval         AGESA_STATUS
+ *
+ */
+VOID
+DmiGetT4ProcFamilyFromBrandId (
+  IN OUT   UINT8 *T4ProcFamily,
+  IN       PROC_FAMILY_TABLE *CpuDmiProcFamilyTable,
+  IN       CPU_TYPE_INFO *CpuInfo,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT16 Index;
+  *T4ProcFamily = P_UPGRADE_UNKNOWN;
+  if (CpuInfo->BrandId.Model != P_ENGINEERING_SAMPLE) {
+    for (Index = 0; Index < CpuDmiProcFamilyTable->LenBrandList; Index++) {
+      if ((CpuDmiProcFamilyTable->DmiBrandList[Index].PackageType == 'x' || CpuDmiProcFamilyTable->DmiBrandList[Index].PackageType == CpuInfo->PackageType) &&
+          (CpuDmiProcFamilyTable->DmiBrandList[Index].PgOfBrandId == 'x' || CpuDmiProcFamilyTable->DmiBrandList[Index].PgOfBrandId == CpuInfo->BrandId.Pg) &&
+          (CpuDmiProcFamilyTable->DmiBrandList[Index].NumberOfCores == 'x' || CpuDmiProcFamilyTable->DmiBrandList[Index].NumberOfCores == CpuInfo->TotalCoreNumber) &&
+          (CpuDmiProcFamilyTable->DmiBrandList[Index].String1ofBrandId == 'x' || CpuDmiProcFamilyTable->DmiBrandList[Index].String1ofBrandId == CpuInfo->BrandId.String1)) {
+        *T4ProcFamily = CpuDmiProcFamilyTable->DmiBrandList[Index].ValueSetToDmiTable;
+        break;
+      }
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  GetNameString
+ *
+ *  Description:
+ *    Get name string from MSR_C001_00[35:30]
+ *
+ *  Parameters:
+ *    @param[in, out]    *String       Pointer to name string
+ *    @param[in, out]    *StdHeader
+ *
+ */
+VOID
+GetNameString (
+  IN OUT   CHAR8 *String,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8  i;
+  UINT8  StringIndex;
+  UINT8  MsrIndex;
+  UINT64 MsrData;
+
+  StringIndex = 0;
+  for (MsrIndex = 0; MsrIndex <= 5; MsrIndex++) {
+    LibAmdMsrRead ((MSR_CPUID_NAME_STRING0 + MsrIndex), &MsrData, StdHeader);
+    for (i = 0; i < 8; i++) {
+      String[StringIndex] = (CHAR8) (MsrData >> (8 * i));
+      StringIndex++;
+    }
+  }
+  String[StringIndex] = '\0';
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  IsSourceStrContainTargetStr
+ *
+ *  Description:
+ *    check if source string contains target string.
+ *
+ *  Parameters:
+ *    @param[in, out]    *SourceStr      Pointer to source CHAR array
+ *    @param[in, out]    *TargetStr      Pointer to target CHAR array
+ *    @param[in, out]    *StdHeader
+ *
+ *    @retval            TRUE             Target string is contained in the source string
+ *    @retval            FALSE            Target string is not contained in the source string
+ */
+BOOLEAN
+IsSourceStrContainTargetStr (
+  IN OUT   CHAR8 *SourceStr,
+  IN OUT   CONST CHAR8 *TargetStr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN IsContained;
+  UINT32  SourceStrIndex;
+  UINT32  TargetStrIndex;
+  CHAR8 TargetChar;
+
+  IsContained = FALSE;
+  if ((TargetStr != NULL) && (SourceStr != NULL)) {
+    for (SourceStrIndex = 0; SourceStr[SourceStrIndex] != '\0'; SourceStrIndex++) {
+      // Compare TrgString with SrcString from frist charactor to the '\0'
+      for (TargetStrIndex = 0; TargetStr[TargetStrIndex] != '\0'; TargetStrIndex++) {
+        if (TargetStr[TargetStrIndex] != SourceStr[SourceStrIndex + TargetStrIndex]) {
+          // if it's not match, try to check the upcase/lowcase
+          TargetChar = 0;
+          if (TargetStr[TargetStrIndex] >= 'a' && TargetStr[TargetStrIndex] <= 'z') {
+            TargetChar = TargetStr[TargetStrIndex] - ('a' - 'A');
+          } else if (TargetStr[TargetStrIndex] >= 'A' && TargetStr[TargetStrIndex] <= 'Z') {
+            TargetChar = TargetStr[TargetStrIndex] + ('a' - 'A');
+          }
+          // compare again
+          if (TargetChar != SourceStr[SourceStrIndex + TargetStrIndex]) {
+            break;
+      }
+        }
+      }
+
+      if ((TargetStr[TargetStrIndex] == '\0') && (TargetStrIndex != 0)) {
+        IsContained = TRUE;
+        break;
+      }
+    }
+  }
+  return IsContained;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  AdjustGranularity
+ *
+ *  Description:
+ *    If cache size is greater than or equal to 32M, then set granularity
+ *    to 64K. otherwise, set granularity to 1K
+ *
+ *  Parameters:
+ *    @param[in]    *CacheSizePtr
+ *
+ *    @retval       CacheSize
+ *
+ *  Processing:
+ *
+ */
+UINT16
+STATIC
+AdjustGranularity (
+  IN UINT32 *CacheSizePtr
+  )
+{
+  UINT16 CacheSize;
+
+  if (*CacheSizePtr >= 0x8000) {
+    CacheSize = (UINT16) (*CacheSizePtr / 64);
+    CacheSize |= 0x8000;
+  } else {
+    CacheSize = (UINT16) *CacheSizePtr;
+  }
+
+  return (CacheSize);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  ReleaseDmiBufferStub
+ *
+ *  Description:
+ *     This is the default routine for use when the DMI option is NOT requested.
+ *
+ *  Parameters:
+ *    @param[in, out]    *StdHeader
+ *
+ *    @retval         AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+ReleaseDmiBufferStub (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  return  AGESA_UNSUPPORTED;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  ReleaseDmiBuffer
+ *
+ *  Description:
+ *     Deallocate DMI buffer
+ *
+ *  Parameters:
+ *    @param[in, out]    *StdHeader
+ *
+ *    @retval         AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+ReleaseDmiBuffer (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  HeapDeallocateBuffer ((UINT32) AMD_DMI_MEM_DEV_INFO_HANDLE, StdHeader);
+
+  return  AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  IntToString
+ *
+ *  Description:
+ *    Translate UINT array to CHAR array.
+ *
+ *  Parameters:
+ *    @param[in, out]    *String       Pointer to CHAR array
+ *    @param[in]         *Integer      Pointer to UINT array
+ *    @param[in]         SizeInByte    The size of UINT array
+ *
+ *  Processing:
+ *
+ */
+VOID
+STATIC
+IntToString (
+  IN OUT   CHAR8 *String,
+  IN       UINT8 *Integer,
+  IN       UINT8 SizeInByte
+  )
+{
+  UINT8 Index;
+
+  for (Index = 0; Index < SizeInByte; Index++) {
+    *(String + Index * 2) = (*(Integer + Index) >> 4) & 0x0F;
+    *(String + Index * 2 + 1) = *(Integer + Index) & 0x0F;
+  }
+  for (Index = 0; Index < (SizeInByte * 2); Index++) {
+    if (*(String + Index) >= 0x0A) {
+      *(String + Index) += 0x37;
+    } else {
+      *(String + Index) += 0x30;
+    }
+  }
+  *(String + SizeInByte * 2) = 0x0;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuFeatureLeveling.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuFeatureLeveling.c
new file mode 100644
index 0000000000..1f2e70880e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuFeatureLeveling.c
@@ -0,0 +1,266 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Feature Leveling Function.
+ *
+ * Contains code to Level the Feature in a multi-socket system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuPostInit.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUFEATURELEVELING_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+SaveFeatures (
+  IN OUT   VOID *cpuFeatureListPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+WriteFeatures (
+  IN OUT   VOID *cpuFeatureListPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+GetGlobalCpuFeatureListAddress (
+     OUT   UINT64            **Address,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          P U B L I C     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  FeatureLeveling
+ *
+ *    CPU feature leveling. Set least common features set of all CPUs
+ *
+ *    @param[in,out]   StdHeader   - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+FeatureLeveling (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 BscSocket;
+  UINT32 Ignored;
+  UINT32 BscCoreNum;
+  UINT32 Socket;
+  UINT32 Core;
+  UINT32 NumberOfSockets;
+  UINT32 NumberOfCores;
+  BOOLEAN *FirstTime;
+  BOOLEAN *NeedLeveling;
+  AGESA_STATUS IgnoredSts;
+  CPU_FEATURES_LIST *globalCpuFeatureList;
+  AP_TASK  TaskPtr;
+
+  ASSERT (IsBsp (StdHeader, &IgnoredSts));
+
+  GetGlobalCpuFeatureListAddress ((UINT64 **) &globalCpuFeatureList, StdHeader);
+  FirstTime = (BOOLEAN *) ((UINT8 *) globalCpuFeatureList + sizeof (CPU_FEATURES_LIST));
+  NeedLeveling = (BOOLEAN *) ((UINT8 *) globalCpuFeatureList + sizeof (CPU_FEATURES_LIST) + sizeof (BOOLEAN));
+
+  *FirstTime = TRUE;
+  *NeedLeveling = FALSE;
+
+  LibAmdMemFill (globalCpuFeatureList, 0xFF, sizeof (CPU_FEATURES_LIST), StdHeader);
+  IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  TaskPtr.FuncAddress.PfApTaskI = SaveFeatures;
+  TaskPtr.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (CPU_FEATURES_LIST);
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+  TaskPtr.DataTransfer.DataPtr = globalCpuFeatureList;
+  TaskPtr.DataTransfer.DataTransferFlags = DATA_IN_MEMORY;
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      if (Socket !=  BscSocket) {
+        ApUtilRunCodeOnSocketCore ((UINT8)Socket, 0, &TaskPtr, StdHeader);
+      }
+    }
+  }
+  ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, NULL);
+
+  if (*NeedLeveling) {
+    TaskPtr.FuncAddress.PfApTaskI  = WriteFeatures;
+    for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+      if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+        for (Core = 0; Core < NumberOfCores; Core++) {
+          if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+            ApUtilRunCodeOnSocketCore ((UINT8)Socket, (UINT8)Core, &TaskPtr, StdHeader);
+          }
+        }
+      }
+    }
+    ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, NULL);
+  }
+}
+
+/*----------------------------------------------------------------------------------------
+ *                          L O C A L      F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  SaveFeatures
+ *
+ *    save least common features set of all CPUs
+ *
+ *    @param[in,out]  cpuFeatureListPtr  - Pointer to CPU Feature List.
+ *    @param[in,out]  StdHeader          - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+STATIC
+SaveFeatures (
+  IN OUT   VOID *cpuFeatureListPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  FamilySpecificServices = NULL;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->SaveFeatures (FamilySpecificServices, cpuFeatureListPtr, StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  WriteFeatures
+ *
+ *    Write out least common features set of all CPUs
+ *
+ *    @param[in,out]  cpuFeatureListPtr  - Pointer to CPU Feature List.
+ *    @param[in,out]  StdHeader          - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+STATIC
+WriteFeatures (
+  IN OUT   VOID *cpuFeatureListPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  FamilySpecificServices = NULL;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->WriteFeatures (FamilySpecificServices, cpuFeatureListPtr, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  GetGlobalCpuFeatureListAddress
+ *
+ *   Determines the address in system DRAM that should be used for CPU feature leveling.
+ *
+ * @param[out] Address           Address to utilize
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ *
+ */
+VOID
+STATIC
+GetGlobalCpuFeatureListAddress (
+     OUT   UINT64            **Address,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 AddressValue;
+
+  AddressValue = GLOBAL_CPU_FEATURE_LIST_TEMP_ADDR;
+
+  *Address = (UINT64 *)(AddressValue);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuFeatures.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuFeatures.c
new file mode 100644
index 0000000000..fa87380608
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuFeatures.c
@@ -0,0 +1,199 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Implement general feature dispatcher.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                            M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "GeneralServices.h"
+#include "cpuFeatures.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FEATURE_CPUFEATURES_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *            E X P O R T E D    F U N C T I O N S - External General Services API
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST CPU_FEATURE_DESCRIPTOR* ROMDATA SupportedCpuFeatureList[];
+
+/**
+ * Determines if a specific feature is or will be enabled.
+ *
+ * This code traverses the feature list until a match is
+ * found, then invokes the 'IsEnabled' function of the
+ * feature.
+ *
+ * @param[in]       Feature        Indicates the desired feature.
+ * @param[in]       PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in]       StdHeader      Standard AMD configuration parameters.
+ *
+ * @retval         TRUE      Feature is or will be enabled
+ * @retval         FALSE     Feature is not enabled
+ */
+BOOLEAN
+IsFeatureEnabled (
+  IN       DISPATCHABLE_CPU_FEATURES Feature,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINTN i;
+
+  ASSERT (Feature < MaxCpuFeature);
+
+  for (i = 0; SupportedCpuFeatureList[i] != NULL; i++) {
+    if (SupportedCpuFeatureList[i]->Feature == Feature) {
+      return (SupportedCpuFeatureList[i]->IsEnabled (PlatformConfig, StdHeader));
+    }
+  }
+  return FALSE;
+}
+
+/**
+ * Dispatches all features needing to perform some initialization at
+ * this time point.
+ *
+ * This routine searches the feature table for features needing to
+ * run at this time point, and invokes them.
+ *
+ * @param[in]      EntryPoint     Timepoint designator
+ * @param[in]      PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in]      StdHeader      Standard AMD configuration parameters.
+ *
+ * @return         The most severe status of any called service.
+ */
+AGESA_STATUS
+DispatchCpuFeatures (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINTN i;
+  AGESA_STATUS AgesaStatus;
+  AGESA_STATUS CalledStatus;
+  AGESA_STATUS IgnoredStatus;
+
+  AgesaStatus = AGESA_SUCCESS;
+
+  if (IsBsp (StdHeader, &IgnoredStatus)) {
+    for (i = 0; SupportedCpuFeatureList[i] != NULL; i++) {
+      if ((SupportedCpuFeatureList[i]->EntryPoint & EntryPoint) != 0) {
+        IDS_SKIP_HOOK (IDS_CPU_FEAT, (CPU_FEATURE_DESCRIPTOR *) SupportedCpuFeatureList[i], StdHeader) {
+          if (SupportedCpuFeatureList[i]->IsEnabled (PlatformConfig, StdHeader)) {
+            CalledStatus = SupportedCpuFeatureList[i]->InitializeFeature (EntryPoint, PlatformConfig, StdHeader);
+            if (CalledStatus > AgesaStatus) {
+              AgesaStatus = CalledStatus;
+            }
+          }
+        }
+      }
+    }
+  }
+  return AgesaStatus;
+}
+
+/**
+ * This routine checks whether any non-coherent links in the system
+ * runs in HT1 mode; used to determine whether certain features
+ * should be disabled when this routine returns TRUE.
+ *
+ * @param[in]      StdHeader  Standard AMD configuration parameters.
+ *
+ * @retval         TRUE       One of the non-coherent links in the
+ *                            system runs in HT1 mode
+ * @retval         FALSE      None of the non-coherent links in the
+ *                            system is running in HT1 mode
+ */
+BOOLEAN
+IsNonCoherentHt1 (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINTN                 Link;
+  UINT32                Socket;
+  UINT32                Module;
+  PCI_ADDR              PciAddress;
+  AGESA_STATUS          AgesaStatus;
+  HT_HOST_FEATS         HtHostFeats;
+  CPU_SPECIFIC_SERVICES *CpuServices;
+
+  for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      GetCpuServicesOfSocket (Socket, (const CPU_SPECIFIC_SERVICES **)&CpuServices, StdHeader);
+      for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+        if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &AgesaStatus)) {
+          HtHostFeats.HtHostValue = 0;
+          Link = 0;
+          while (CpuServices->GetNextHtLinkFeatures (CpuServices, &Link, &PciAddress, &HtHostFeats, StdHeader)) {
+            // Return TRUE and exit routine once we find a non-coherent link in HT1
+            if ((HtHostFeats.HtHostFeatures.NonCoherent == 1) && (HtHostFeats.HtHostFeatures.Ht1 == 1)) {
+              return TRUE;
+            }
+          }
+        }
+      }
+    }
+  }
+
+  return FALSE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuFeatures.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuFeatures.h
new file mode 100644
index 0000000000..e9bce70ff9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuFeatures.h
@@ -0,0 +1,269 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Generic CPU feature dispatcher and related services.
+ *
+ * Provides a feature processing engine to handle feature in a
+ * more generic way.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Common
+ * @e \$Revision: 54493 $   @e \$Date: 2011-06-08 15:21:06 -0600 (Wed, 08 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_FEATURES_H_
+#define _CPU_FEATURES_H_
+
+/**
+ * @page cpufeatimpl CPU Generic Feature Implementation Guide
+ *
+ * The CPU generic feature dispatcher provides services which can be used to implement a
+ * wide range of features in a manner that isolates calling code from knowledge about which
+ * families or features are supported in the current build.
+ *
+ * @par Determine if a New Feature is a Suitable Candidate
+ *
+ * A feature must meet the following requirements:
+ * <ul>
+ * <li> Any core in the system must be able to determine if the feature should be enabled or not.
+ *
+ *   <ul>
+ *   <li> MSRs cannot be read in multisocket systems in the 'IsEnabled' function.
+ *
+ *   <li> Cores cannot be launched in the 'IsEnabled' function.
+ *   </ul>
+ * </ul>
+ *
+ * @par Determine the Time Point at which the Feature Should be Enabled
+ *
+ * Factors to consider in making this determination:
+ *
+ * <ul>
+ * <li> Determine if there are any dependencies on other settings that require strict ordering.
+ *
+ * <li> Consider the state of the APs that you will need.
+ *
+ * <li> Remember that features enabled during AmdInitEarly will automatically be restored on S3 resume.
+ * </ul>
+ *
+ * @par Implementing a new feature
+ *
+ * Perform the following steps to implement a new feature:
+ *
+ * <ul>
+ * <li> Create a unique equate for your time point, @b if you cannot use an existing time point.
+ *
+ * <li> Create a new value in the DISPATCHABLE_CPU_FEATURES enum for your feature.
+ *
+ * <li> Add a new 'C' file to the Features folder for your feature.
+ *
+ *   <ul>
+ *   <li> The 'C' file must implement 2 functions -- 'IsEnabled' and 'Initialize'
+ *
+ *   <li> The 'C' file must instantiate a CPU_FEATURE_DESCRIPTOR structure.
+ *   </ul>
+ *
+ * <li> Add a new 'H' file to the Features folder for your feature.
+ *
+ *   <ul>
+ *   <li> The 'H' file declares whatever family specific functions required by the feature.
+ *
+ *   <li> The 'H' file declares a structure containing all family specific functions.  For a reference
+ *        example, your feature API should have a set of conventions similar to cpu specific services,
+ *        @ref cpuimplfss.
+ *   </ul>
+ *
+ * <li> Create 'C' files in all applicable family folders.
+ *
+ *   <ul>
+ *   <li> Implement the required family specific functions.
+ *
+ *   <li> Instantiate a family specific services structure.
+ *   </ul>
+ *
+ * <li> Create \<feature name\>Install.h in the include folder.
+ *
+ *   <ul>
+ *   <li> Add logic to determine when your feature should be included in the build.
+ *
+ *   <li> If the feature should be included, define OPTION_\<feature name\> to the address of your
+ *        CPU_FEATURE_DESCRIPTOR instantiation.  If not, define OPTION_\<feature name\> to be blank.
+ *
+ *   <li> Create a family translation table pointing to all applicable instantiations of
+ *        family specific function structures.
+ *   </ul>
+ *
+ * <li> Modify OptionCpuFeaturesInstall.h in the include folder.
+ *
+ *   <ul>
+ *   <li> Include \<feature name\>Install.h.
+ *
+ *   <li> Add OPTION_\<feature name\> to the SupportedCpuFeatureList array.
+ *   </ul>
+ *
+ * <li> If a new time point was created, add a call to DispatchCpuFeatures at the desired location,
+ *      passing your new time point equate.
+ * </ul>
+ *
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+#define CPU_FEAT_BEFORE_PM_INIT           (0x0000000000000001ull)
+#define CPU_FEAT_AFTER_PM_INIT            (0x0000000000000002ull)
+#define CPU_FEAT_AFTER_POST_MTRR_SYNC     (0x0000000000000004ull)
+#define CPU_FEAT_INIT_MID_END             (0x0000000000000008ull)
+#define CPU_FEAT_INIT_LATE_END            (0x0000000000000010ull)
+#define CPU_FEAT_S3_LATE_RESTORE_END      (0x0000000000000020ull)
+#define CPU_FEAT_AFTER_RESUME_MTRR_SYNC   (0x0000000000000040ull)
+#define CPU_FEAT_AFTER_COHERENT_DISCOVERY (0x0000000000000080ull)
+#define CPU_FEAT_BEFORE_RELINQUISH_AP     (0x0000000000000100ull)
+/**
+ * Enumerated list of supported features.
+ */
+typedef enum {
+  HardwareC1e,               ///< Hardware C1e
+  L3Features,                ///< L3 dependent features
+  MsgBasedC1e,               ///< Message-based C1e
+  SoftwareC1e,               ///< Software C1e
+  CoreLeveling,              ///< Core Leveling
+  C6Cstate,                  ///< C6 C-state
+  IoCstate,                  ///< IO C-state
+  CacheFlushOnHalt,          ///< Cache Flush On Halt
+  PreserveAroundMailbox,     ///< Save-Restore the registers used for AP mailbox, to preserve their normal function.
+  CoreBoost,                 ///< Core Performance Boost (CPB)
+  LowPwrPstate,              ///< 500 MHz Low Power P-state
+  PstateHpcMode,             ///< High performance computing mode
+  CpuApm,                    ///< Application Power Management
+  MaxCpuFeature              ///< Not a valid value, used for verifying input
+} DISPATCHABLE_CPU_FEATURES;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Feature specific call to check if it is supported by the system.
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               Feature is supported.
+ * @retval       FALSE              Feature is not supported.
+ *
+ */
+typedef BOOLEAN F_CPU_FEATURE_IS_ENABLED (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_FEATURE_IS_ENABLED *PF_CPU_FEATURE_IS_ENABLED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  The feature's main entry point for enablement.
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_CPU_FEATURE_INITIALIZE (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_FEATURE_INITIALIZE *PF_CPU_FEATURE_INITIALIZE;
+
+
+/**
+ * Generic feature descriptor
+ */
+typedef struct {
+  DISPATCHABLE_CPU_FEATURES Feature;     ///< Enumerated feature ID
+  UINT64                    EntryPoint;  ///< Timepoint designator
+  PF_CPU_FEATURE_IS_ENABLED IsEnabled;   ///< Pointer to the function that checks if the feature is supported
+  PF_CPU_FEATURE_INITIALIZE InitializeFeature; ///< Pointer to the function that enables the feature
+} CPU_FEATURE_DESCRIPTOR;
+
+/**
+ * Table descriptor for the installed features.
+ */
+typedef struct {
+  UINT8       NumberOfFeats;      ///< Number of valid entries in the table.
+  CPU_FEATURE_DESCRIPTOR *FeatureList;       ///< Pointer to the first element in the array.
+} CPU_FEATURE_TABLE;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+BOOLEAN
+IsFeatureEnabled (
+  IN       DISPATCHABLE_CPU_FEATURES Feature,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+DispatchCpuFeatures (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+BOOLEAN
+IsNonCoherentHt1 (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+#endif // _CPU_FEATURES_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuHwC1e.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuHwC1e.c
new file mode 100644
index 0000000000..ab9a46ef8b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuHwC1e.c
@@ -0,0 +1,181 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU HW C1e feature support code.
+ *
+ * Contains code that declares the AGESA CPU C1e related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "Topology.h"
+#include "cpuFeatures.h"
+#include "cpuHwC1e.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUHWC1E_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE HwC1eFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should hardware C1e be enabled
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               HW C1e is supported.
+ * @retval       FALSE              HW C1e cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsHwC1eFeatureEnabled (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32           C1eData;
+  BOOLEAN          IsEnabled;
+  AP_MAILBOXES     ApMailboxes;
+  HW_C1E_FAMILY_SERVICES *FamilyServices;
+
+  ASSERT (PlatformConfig->C1eMode < MaxC1eMode);
+  IsEnabled = FALSE;
+  C1eData   = PlatformConfig->C1ePlatformData;
+  if ((PlatformConfig->C1eMode == C1eModeHardware) || (PlatformConfig->C1eMode == C1eModeHardwareSoftwareDeprecated) ||
+      (PlatformConfig->C1eMode == C1eModeAuto)) {
+    // If C1eMode is Auto, C1ePlatformData3 specifies the P_LVL3 I/O port of the platform for HW C1e
+    if (PlatformConfig->C1eMode == C1eModeAuto) {
+      C1eData = PlatformConfig->C1ePlatformData3;
+    }
+    ASSERT (C1eData < 0x10000);
+    ASSERT (C1eData != 0);
+    if ((C1eData != 0) && (C1eData < 0xFFFE)) {
+      if (!IsNonCoherentHt1 (StdHeader)) {
+        if (GetNumberOfProcessors (StdHeader) == 1) {
+          GetApMailbox (&ApMailboxes.ApMailInfo.Info, StdHeader);
+          if (ApMailboxes.ApMailInfo.Fields.ModuleType == 0) {
+            GetFeatureServicesOfCurrentCore (&HwC1eFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+            if (FamilyServices != NULL) {
+              IsEnabled = FamilyServices->IsHwC1eSupported (FamilyServices, StdHeader);
+            }
+          }
+        }
+      }
+    }
+  }
+  return IsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable Hardware C1e
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       The most severe status of any family specific service.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeHwC1eFeature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  AGESA_STATUS CalledStatus;
+  AGESA_STATUS AgesaStatus;
+  HW_C1E_FAMILY_SERVICES *FamilyServices;
+
+  AgesaStatus = AGESA_SUCCESS;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "    HW C1e is enabled\n");
+
+  if (IsWarmReset (StdHeader)) {
+    GetFeatureServicesOfCurrentCore (&HwC1eFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+    CalledStatus = FamilyServices->InitializeHwC1e (FamilyServices, EntryPoint, PlatformConfig, StdHeader);
+    if (CalledStatus > AgesaStatus) {
+      AgesaStatus = CalledStatus;
+    }
+  }
+  return AgesaStatus;
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureHwC1e =
+{
+  HardwareC1e,
+  CPU_FEAT_AFTER_PM_INIT,
+  IsHwC1eFeatureEnabled,
+  InitializeHwC1eFeature
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuHwC1e.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuHwC1e.h
new file mode 100644
index 0000000000..5b29fa0e33
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuHwC1e.h
@@ -0,0 +1,126 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU HW C1e Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU C1e related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_HW_C1E_H_
+#define _CPU_HW_C1E_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+//  Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (HW_C1E_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if hardware C1e is supported.
+ *
+ * @param[in]    HwC1eServices      Hardware C1e services.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               HW C1e is supported.
+ * @retval       FALSE              HW C1e is not supported.
+ *
+ */
+typedef BOOLEAN F_HW_C1E_IS_SUPPORTED (
+  IN       HW_C1E_FAMILY_SERVICES *HwC1eServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_HW_C1E_IS_SUPPORTED *PF_HW_C1E_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to enable hardware C1e.
+ *
+ * @param[in]    HwC1eServices      Hardware C1e services.
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_HW_C1E_INIT (
+  IN       HW_C1E_FAMILY_SERVICES *HwC1eServices,
+  IN       UINT64 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_HW_C1E_INIT *PF_HW_C1E_INIT;
+
+/**
+ * Provide the interface to the hardware C1e Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _HW_C1E_FAMILY_SERVICES {
+  UINT16          Revision;                                             ///< Interface version
+  // Public Methods.
+  PF_HW_C1E_IS_SUPPORTED IsHwC1eSupported;                              ///< Method: Family specific call to check if hardware C1e is supported.
+  PF_HW_C1E_INIT InitializeHwC1e;                                       ///< Method: Family specific call to enable hardware C1e.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ *                          F U N C T I O N S     P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _CPU_HW_C1E_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuIoCstate.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuIoCstate.c
new file mode 100644
index 0000000000..ff5d4424fc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuIoCstate.c
@@ -0,0 +1,208 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU IO Cstate function declarations.
+ *
+ * Contains code that declares the AGESA CPU IO Cstate related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuFeatures.h"
+#include "cpuIoCstate.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUIOCSTATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+EnableIoCstateOnSocket (
+  IN       VOID *EntryPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+  );
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE    IoCstateFamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should IO Cstate be enabled
+ *  If all processors support IO Cstate, return TRUE. Otherwise, return FALSE
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               IO Cstate is supported.
+ * @retval       FALSE              IO Cstate cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsIoCstateFeatureSupported (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                    Socket;
+  BOOLEAN                   IsSupported;
+  IO_CSTATE_FAMILY_SERVICES *IoCstateServices;
+
+  IsSupported = FALSE;
+  if ((PlatformConfig->CStateIoBaseAddress != 0) && (PlatformConfig->CStateIoBaseAddress <= 0xFFF8)) {
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (IsProcessorPresent (Socket, StdHeader)) {
+        GetFeatureServicesOfSocket (&IoCstateFamilyServiceTable, Socket, (CONST VOID **)&IoCstateServices, StdHeader);
+        if (IoCstateServices != NULL) {
+          if (IoCstateServices->IsIoCstateSupported (IoCstateServices, Socket, StdHeader)) {
+            IsSupported = TRUE;
+          } else {
+            // Stop checking remaining socket(s) once we find one that does not support IO Cstates
+            IsSupported = FALSE;
+            break;
+          }
+        } else {
+          // Exit the for loop if we found a socket that does not have the IO Cstates feature installed
+          IsSupported = FALSE;
+          break;
+        }
+      }
+    }
+  }
+  return IsSupported;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable IO Cstate feature
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeIoCstateFeature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  AP_TASK TaskPtr;
+  AMD_CPU_EARLY_PARAMS CpuEarlyParams;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "    IO C-state is enabled\n");
+
+  CpuEarlyParams.PlatformConfig = *PlatformConfig;
+
+  TaskPtr.FuncAddress.PfApTaskIC = EnableIoCstateOnSocket;
+  TaskPtr.DataTransfer.DataSizeInDwords = 2;
+  TaskPtr.DataTransfer.DataPtr = &EntryPoint;
+  TaskPtr.DataTransfer.DataTransferFlags = 0;
+  TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+  OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, &CpuEarlyParams);
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  'Local' core 0 task to enable IO Cstate on it's socket.
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ * @param[in]    CpuEarlyParams     Service parameters.
+ *
+ */
+VOID
+STATIC
+EnableIoCstateOnSocket (
+  IN       VOID *EntryPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+  )
+{
+  IO_CSTATE_FAMILY_SERVICES *FamilyServices;
+
+  GetFeatureServicesOfCurrentCore (&IoCstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  FamilyServices->InitializeIoCstate (FamilyServices,
+                                     *((UINT64 *) EntryPoint),
+                                     &CpuEarlyParams->PlatformConfig,
+                                     StdHeader);
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureIoCstate =
+{
+  IoCstate,
+  (CPU_FEAT_AFTER_PM_INIT),
+  IsIoCstateFeatureSupported,
+  InitializeIoCstateFeature
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuIoCstate.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuIoCstate.h
new file mode 100644
index 0000000000..034a5700c8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuIoCstate.h
@@ -0,0 +1,284 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU IO Cstate feature support code.
+ *
+ * Contains code that declares the AGESA CPU IO Cstate related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_IO_CSTATE_H_
+#define _CPU_IO_CSTATE_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+//  Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (IO_CSTATE_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+// Defines for ACPI C-State Objects
+#define   CST_NAME__            '_'
+#define   CST_NAME_C            'C'
+#define   CST_NAME_S            'S'
+#define   CST_NAME_T            'T'
+#define   CST_LENGTH            (CST_BODY_SIZE - 1)
+#define   CST_NUM_OF_ELEMENTS   0x02
+#define   CST_COUNT             0x01
+#define   CST_PKG_LENGTH        (CST_BODY_SIZE - 6) // CST_BODY_SIZE - PkgHeader - Count Buffer
+#define   CST_PKG_ELEMENTS      0x04
+#define   CST_SUBPKG_LENGTH     0x14
+#define   CST_SUBPKG_ELEMENTS   0x0A
+#define   CST_GDR_LENGTH        0x000C
+#define   CST_C1_TYPE           0x01
+#define   CST_C2_TYPE           0x02
+
+#define   CSD_NAME_D            'D'
+#define   CSD_COORD_TYPE_HW_ALL 0xFE
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/* AML code definition */
+
+/// CST Header
+typedef struct _CST_HEADER_STRUCT {
+  UINT8   NameOpcode;      ///< Name Opcode
+  UINT8   CstName_a__;     ///< String "_"
+  UINT8   CstName_a_C;     ///< String "C"
+  UINT8   CstName_a_S;     ///< String "S"
+  UINT8   CstName_a_T;     ///< String "T"
+} CST_HEADER_STRUCT;
+#define CST_HEADER_SIZE 5
+
+/// CST Body
+typedef struct _CST_BODY_STRUCT {
+  UINT8   PkgOpcode;       ///< Package Opcode
+  UINT8   PkgLength;       ///< Package Length
+  UINT8   PkgElements;     ///< Number of Elements
+  UINT8   BytePrefix;      ///< Byte Prefix Opcode
+  UINT8   Count;           ///< Number of Cstate info packages
+  UINT8   PkgOpcode2;      ///< Package Opcode
+  UINT8   PkgLength2;      ///< Package Length
+  UINT8   PkgElements2;    ///< Number of Elements
+  UINT8   BufferOpcode;    ///< Buffer Opcode
+  UINT8   BufferLength;    ///< Buffer Length
+  UINT8   BufferElements;  ///< Number of Elements
+  UINT8   BufferOpcode2;   ///< Buffer Opcode
+  UINT8   GdrOpcode;       ///< Generic Register Descriptor Opcode
+  UINT16  GdrLength;       ///< Descriptor Length
+  UINT8   AddrSpaceId;     ///< Address Space ID
+  UINT8   RegBitWidth;     ///< Register Bit Width
+  UINT8   RegBitOffset;    ///< Register Bit Offset
+  UINT8   AddressSize;     ///< Address Size
+  UINT64  RegisterAddr;    ///< Register Address
+  UINT16  EndTag;          ///< End Tag Descriptor
+  UINT8   BytePrefix2;     ///< Byte Prefix Opcode
+  UINT8   Type;            ///< Type
+  UINT8   WordPrefix;      ///< Word Prefix Opcode
+  UINT16  Latency;         ///< Latency
+  UINT8   DWordPrefix;     ///< Dword Prefix Opcode
+  UINT32  Power;           ///< Power
+} CST_BODY_STRUCT;
+#define CST_BODY_SIZE 39
+
+/// CSD Header
+typedef struct _CSD_HEADER_STRUCT {
+  UINT8   NameOpcode;     ///< Name Opcode
+  UINT8   CsdName_a__;    ///< String "_"
+  UINT8   CsdName_a_C;    ///< String "C"
+  UINT8   CsdName_a_S;    ///< String "S"
+  UINT8   CsdName_a_D;    ///< String "D"
+} CSD_HEADER_STRUCT;
+#define CSD_HEADER_SIZE 5
+
+/// CSD Body
+typedef struct _CSD_BODY_STRUCT {
+  UINT8   PkgOpcode;      ///< Package Opcode
+  UINT8   PkgLength;      ///< Package Length
+  UINT8   PkgElements;    ///< Number of Elements
+  UINT8   PkgOpcode2;     ///< Package Opcode
+  UINT8   PkgLength2;     ///< Package Length
+  UINT8   PkgElements2;   ///< Number of Elements
+  UINT8   BytePrefix;     ///< Byte Prefix Opcode
+  UINT8   NumEntries;     ///< Number of Entries
+  UINT8   BytePrefix2;    ///< Byte Prefix Opcode
+  UINT8   Revision;       ///< Revision
+  UINT8   DWordPrefix;    ///< DWord Prefix Opcode
+  UINT32  Domain;         ///< Dependency Domain Number
+  UINT8   DWordPrefix2;   ///< DWord Prefix Opcode
+  UINT32  CoordType;      ///< Coordination Type
+  UINT8   DWordPrefix3;   ///< Dword Prefix Opcode
+  UINT32  NumProcessors;  ///< Number of Processors in the Domain
+  UINT8   DWordPrefix4;   ///< Dword Prefix Opcode
+  UINT32  Index;          ///< Index of C-State entry for which dependency applies
+} CSD_BODY_STRUCT;
+#define CSD_BODY_SIZE 30
+
+/// input for create _CST
+typedef struct _ACPI_CST_CREATE_INPUT {
+  IO_CSTATE_FAMILY_SERVICES *IoCstateServices;    ///< Family service of IoCstate
+  UINT8                     LocalApicId;    ///< Local Apic for create _CST
+  VOID                      **PstateAcpiBufferPtr;  ///< buffer for fill _CST
+} ACPI_CST_CREATE_INPUT ;
+
+/// input for get _CST
+typedef struct _ACPI_CST_GET_INPUT {
+  IO_CSTATE_FAMILY_SERVICES *IoCstateServices;    ///< Family service of IoCstate
+  PLATFORM_CONFIGURATION    *PlatformConfig;  ///< platform config
+  UINT32                    *CStateAcpiObjSizePtr;  ///< Point to size of _CST
+} ACPI_CST_GET_INPUT ;
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if IO Cstate is supported.
+ *
+ * @param[in]    IoCstateServices   IO Cstate services.
+ * @param[in]    Socket             Zero-based socket number.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               IO Cstate is supported.
+ * @retval       FALSE              IO Cstate is not supported.
+ *
+ */
+typedef BOOLEAN F_IO_CSTATE_IS_SUPPORTED (
+  IN       IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+  IN       UINT32                    Socket,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to enable IO Cstate.
+ *
+ * @param[in]    IoCstateServices   IO Cstate services.
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_IO_CSTATE_INIT (
+  IN       IO_CSTATE_FAMILY_SERVICES      *IoCstateServices,
+  IN       UINT64                  EntryPoint,
+  IN       PLATFORM_CONFIGURATION  *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS       *StdHeader
+  );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to return the size of ACPI C-State Objects
+ *
+ * @param[in]    IoCstateServices   IO Cstate services.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       Size of ACPI C-State Objects
+ *
+ */
+typedef UINT32 F_IO_CSTATE_GET_CST_SIZE (
+  IN       IO_CSTATE_FAMILY_SERVICES   *IoCstateServices,
+  IN       PLATFORM_CONFIGURATION      *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS           *StdHeader
+  );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to create ACPI C-State Objects
+ *
+ * @param[in]      IoCstateServices      IO Cstate services.
+ * @param[in]      LocalApicId           Local Apic Id
+ * @param[in, out] PstateAcpiBufferPtr   Pointer to Pstate data buffer
+ * @param[in]      StdHeader             Config Handle for library, services.
+ *
+ */
+typedef VOID F_IO_CSTATE_CREATE_CST (
+  IN       IO_CSTATE_FAMILY_SERVICES   *IoCstateServices,
+  IN       UINT8                       LocalApicId,
+  IN OUT   VOID                        **PstateAcpiBufferPtr,
+  IN       AMD_CONFIG_PARAMS           *StdHeader
+  );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check whether CSD object should be created.
+ *
+ * @param[in]      IoCstateServices      IO Cstate services.
+ * @param[in]      StdHeader             Config Handle for library, services.
+ *
+ * @retval         TRUE                  CSD Object should be created.
+ * @retval         FALSE                 CSD Object should not be created.
+ *
+ */
+typedef BOOLEAN F_IO_CSTATE_IS_CSD_GENERATED (
+  IN       IO_CSTATE_FAMILY_SERVICES   *IoCstateServices,
+  IN       AMD_CONFIG_PARAMS           *StdHeader
+  );
+
+/// Reference to a Method
+typedef F_IO_CSTATE_IS_SUPPORTED     *PF_IO_CSTATE_IS_SUPPORTED;
+typedef F_IO_CSTATE_INIT             *PF_IO_CSTATE_INIT;
+typedef F_IO_CSTATE_GET_CST_SIZE     *PF_IO_CSTATE_GET_CST_SIZE;
+typedef F_IO_CSTATE_CREATE_CST       *PF_IO_CSTATE_CREATE_CST;
+typedef F_IO_CSTATE_IS_CSD_GENERATED *PF_IO_CSTATE_IS_CSD_GENERATED;
+
+/**
+ * Provide the interface to the IO Cstate Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _IO_CSTATE_FAMILY_SERVICES {
+  UINT16          Revision;                                  ///< Interface version
+  // Public Methods.
+  PF_IO_CSTATE_IS_SUPPORTED     IsIoCstateSupported;         ///< Method: Family specific call to check if IO Cstate is supported.
+  PF_IO_CSTATE_INIT             InitializeIoCstate;          ///< Method: Family specific call to enable IO Cstate
+  PF_IO_CSTATE_GET_CST_SIZE     GetAcpiCstObj;               ///< Method: Family specific call to return the size of ACPI CST objects.
+  PF_IO_CSTATE_CREATE_CST       CreateAcpiCstObj;            ///< Method: Family specific call to create ACPI CST object
+  PF_IO_CSTATE_IS_CSD_GENERATED IsCsdObjGenerated;           ///< Method: Family specific call to check whether CSD Object should be created.
+};
+
+#endif  // _CPU_IO_CSTATE_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuL3Features.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuL3Features.c
new file mode 100644
index 0000000000..8096e2b3ee
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuL3Features.c
@@ -0,0 +1,350 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU L3 Features Initialization functions.
+ *
+ * Contains code for initializing L3 features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 60552 $   @e \$Date: 2011-10-17 18:50:55 -0600 (Mon, 17 Oct 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuLateInit.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFeatures.h"
+#include "cpuL3Features.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUL3FEATURES_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE L3FeatureFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should L3 features be enabled
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               L3 Features are supported
+ * @retval       FALSE              L3 Features are not supported
+ *
+ */
+BOOLEAN
+STATIC
+IsL3FeatureEnabled (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  BOOLEAN          IsEnabled;
+  UINT32           Socket;
+  L3_FEATURE_FAMILY_SERVICES *FamilyServices;
+
+  IsEnabled = FALSE;
+  if (PlatformConfig->PlatformProfile.UseHtAssist ||
+      PlatformConfig->PlatformProfile.UseAtmMode) {
+    IsEnabled = TRUE;
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (IsProcessorPresent (Socket, StdHeader)) {
+        GetFeatureServicesOfSocket (&L3FeatureFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+        if ((FamilyServices == NULL) || !FamilyServices->IsL3FeatureSupported (FamilyServices, Socket, StdHeader, PlatformConfig)) {
+          IsEnabled = FALSE;
+          break;
+        }
+      }
+    }
+  }
+  return IsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable L3 dependent features.
+ *
+ * L3 features initialization requires the following series of steps.
+ *  1. Disable L3 and DRAM scrubbers on all nodes
+ *  2. Wait 40us for outstanding scrub results to complete
+ *  3. Disable all cache activity in the system
+ *  4. Issue WBINVD on all active cores
+ *  5. Initialize Probe Filter, if supported
+ *  6. Initialize ATM Mode, if supported
+ *  7. Enable all cache activity in the system
+ *  8. Restore L3 and DRAM scrubber register values
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeL3Feature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                      CpuCount;
+  UINT32                      Socket;
+  BOOLEAN                     HtAssistEnabled;
+  BOOLEAN                     AtmModeEnabled;
+  AGESA_STATUS                AgesaStatus;
+  AP_MAILBOXES                ApMailboxes;
+  AP_EXE_PARAMS               ApParams;
+  UINT32                      Scrubbers[MAX_SOCKETS_SUPPORTED][L3_SCRUBBER_CONTEXT_ARRAY_SIZE];
+  L3_FEATURE_FAMILY_SERVICES  *FamilyServices[MAX_SOCKETS_SUPPORTED];
+
+  AgesaStatus     = AGESA_SUCCESS;
+  HtAssistEnabled = TRUE;
+  AtmModeEnabled  = TRUE;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "    Enabling L3 dependent features\n");
+
+  // There are many family service call outs.  Initialize the family service array while
+  // cache is still enabled.
+  for (Socket = 0; Socket < MAX_SOCKETS_SUPPORTED; Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      GetFeatureServicesOfSocket (&L3FeatureFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices[Socket], StdHeader);
+    } else {
+      FamilyServices[Socket] = NULL;
+    }
+  }
+
+  if (EntryPoint == CPU_FEAT_AFTER_POST_MTRR_SYNC) {
+    // Check for optimal settings
+    GetApMailbox (&ApMailboxes.ApMailInfo.Info, StdHeader);
+    CpuCount = GetNumberOfProcessors (StdHeader);
+    if (((CpuCount == 1) && (ApMailboxes.ApMailInfo.Fields.ModuleType == 1)) ||
+        ((CpuCount == 2) && (ApMailboxes.ApMailInfo.Fields.ModuleType == 0))) {
+      for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+        // Only check for non-optimal HT Assist setting is if's supported.
+        if ((FamilyServices[Socket] != NULL) &&
+            (FamilyServices[Socket]->IsHtAssistSupported (FamilyServices[Socket], PlatformConfig, StdHeader))) {
+          if (FamilyServices[Socket]->IsNonOptimalConfig (FamilyServices[Socket], Socket, StdHeader)) {
+            // Non-optimal settings.  Log an event.
+            AgesaStatus = AGESA_WARNING;
+            PutEventLog (AgesaStatus, CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG, 0, 0, 0, 0, StdHeader);
+            break;
+          }
+        }
+      }
+    }
+  } else {
+    // Disable the scrubbers.
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (FamilyServices[Socket] != NULL) {
+        FamilyServices[Socket]->GetL3ScrubCtrl (FamilyServices[Socket], Socket, &Scrubbers[Socket][0], StdHeader);
+
+        // If any node in the system does not support Probe Filter, disable it on the system
+        if (!FamilyServices[Socket]->IsHtAssistSupported (FamilyServices[Socket], PlatformConfig, StdHeader)) {
+          HtAssistEnabled = FALSE;
+        }
+        // If any node in the system does not support ATM mode, disable it on the system
+        if (!FamilyServices[Socket]->IsAtmModeSupported (FamilyServices[Socket], PlatformConfig, StdHeader)) {
+          AtmModeEnabled = FALSE;
+        }
+      }
+    }
+
+    // Wait for 40us
+    WaitMicroseconds ((UINT32) 40, StdHeader);
+
+    // Run DisableAllCaches on AP cores.
+    ApParams.StdHeader = *StdHeader;
+    ApParams.FunctionNumber = AP_LATE_TASK_DISABLE_CACHE;
+    ApParams.RelatedDataBlock = (VOID *) &HtAssistEnabled;
+    ApParams.RelatedBlockLength = sizeof (BOOLEAN);
+    RunLateApTaskOnAllAPs (&ApParams, StdHeader);
+
+    // Run DisableAllCaches on core 0.
+    DisableAllCaches (&ApParams);
+
+    // Family hook before initialization.
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (FamilyServices[Socket] != NULL) {
+        FamilyServices[Socket]->HookBeforeInit (FamilyServices[Socket], Socket, StdHeader);
+      }
+    }
+
+    // Activate Probe Filter & ATM mode.
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (FamilyServices[Socket] != NULL) {
+        if (HtAssistEnabled) {
+          FamilyServices[Socket]->HtAssistInit (FamilyServices[Socket], Socket, StdHeader);
+        }
+        if (AtmModeEnabled) {
+          FamilyServices[Socket]->AtmModeInit (FamilyServices[Socket], Socket, StdHeader);
+        }
+      }
+    }
+
+    // Family hook after initialization.
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (FamilyServices[Socket] != NULL) {
+        FamilyServices[Socket]->HookAfterInit (FamilyServices[Socket], Socket, StdHeader);
+      }
+    }
+
+    // Run EnableAllCaches on core 0.
+    EnableAllCaches (&ApParams);
+
+    // Run EnableAllCaches on every core.
+    ApParams.FunctionNumber = AP_LATE_TASK_ENABLE_CACHE;
+    RunLateApTaskOnAllAPs (&ApParams, StdHeader);
+
+    // Restore the scrubbers.
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (FamilyServices[Socket] != NULL) {
+        FamilyServices[Socket]->SetL3ScrubCtrl (FamilyServices[Socket], Socket, &Scrubbers[Socket][0], StdHeader);
+      }
+    }
+  }
+
+  return AgesaStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Disable all the caches on current core.
+ *
+ * @param[in] ApExeParams   Handle to config for library and services.
+ *
+ * @retval    AGESA_SUCCESS  Always succeeds.
+ *
+ */
+AGESA_STATUS
+DisableAllCaches (
+  IN       AP_EXE_PARAMS *ApExeParams
+  )
+{
+  UINT32   CR0Data;
+  L3_FEATURE_FAMILY_SERVICES  *FamilyServices;
+
+  // Disable cache through CR0.
+  LibAmdReadCpuReg (0, &CR0Data);
+  CR0Data |= (0x60000000);
+  LibAmdWriteCpuReg (0, CR0Data);
+
+  // Execute wbinvd
+  LibAmdWriteBackInvalidateCache ();
+
+  GetFeatureServicesOfCurrentCore (&L3FeatureFamilyServiceTable, (CONST VOID **)&FamilyServices, &ApExeParams->StdHeader);
+
+  FamilyServices->HookDisableCache (FamilyServices, *(BOOLEAN *) ApExeParams->RelatedDataBlock, &ApExeParams->StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Enable all the caches on current core.
+ *
+ * @param[in] ApExeParams    Handle to config for library and services.
+ *
+ * @retval    AGESA_SUCCESS  Always succeeds.
+ *
+ */
+AGESA_STATUS
+EnableAllCaches (
+  IN       AP_EXE_PARAMS *ApExeParams
+  )
+{
+  UINT32   CR0Data;
+  L3_FEATURE_FAMILY_SERVICES  *FamilyServices;
+
+  // Enable cache through CR0.
+  LibAmdReadCpuReg (0, &CR0Data);
+  CR0Data &= ~(0x60000000);
+  LibAmdWriteCpuReg (0, CR0Data);
+
+  GetFeatureServicesOfCurrentCore (&L3FeatureFamilyServiceTable, (CONST VOID **)&FamilyServices, &ApExeParams->StdHeader);
+
+  FamilyServices->HookEnableCache (FamilyServices, &ApExeParams->StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuL3Features =
+{
+  L3Features,
+  (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_INIT_MID_END | CPU_FEAT_S3_LATE_RESTORE_END),
+  IsL3FeatureEnabled,
+  InitializeL3Feature
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuL3Features.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuL3Features.h
new file mode 100644
index 0000000000..80422860af
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuL3Features.h
@@ -0,0 +1,361 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU L3 Features Initialization functions.
+ *
+ * Contains code that declares the AGESA CPU L3 dependent feature related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 60552 $   @e \$Date: 2011-10-17 18:50:55 -0600 (Mon, 17 Oct 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_L3_FEATURES_H_
+#define _CPU_L3_FEATIRES_H_
+
+#include "Filecode.h"
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+//  Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (L3_FEATURE_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define AP_LATE_TASK_DISABLE_CACHE (0x00000000 | PROC_CPU_FEATURE_CPUL3FEATURES_FILECODE)
+#define AP_LATE_TASK_ENABLE_CACHE  (0x00010000 | PROC_CPU_FEATURE_CPUL3FEATURES_FILECODE)
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+#define L3_SCRUBBER_CONTEXT_ARRAY_SIZE 4
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if L3 Features are supported.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ * @param[in]    PlatformConfig      Contains the runtime modifiable feature input data.
+ *
+ * @retval       TRUE               L3 dependent features are supported
+ * @retval       FALSE              L3 dependent features are not supported
+ *
+ */
+typedef BOOLEAN F_L3_FEATURE_IS_SUPPORTED (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig
+  );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_IS_SUPPORTED *PF_L3_FEATURE_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific hook before L3 features are initialized.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_BEFORE_INIT (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_BEFORE_INIT *PF_L3_FEATURE_BEFORE_INIT;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to disable cache.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    HtAssistEnabled     Indicates whether Ht Assist is enabled.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_DISABLE_CACHE (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       BOOLEAN HtAssistEnabled,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_DISABLE_CACHE *PF_L3_FEATURE_DISABLE_CACHE;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to disable cache.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @return       Family specific error value.
+ *
+ */
+typedef VOID F_L3_FEATURE_ENABLE_CACHE (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_ENABLE_CACHE *PF_L3_FEATURE_ENABLE_CACHE;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to Initialize L3 Features
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to enable.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_INIT (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_INIT *PF_L3_FEATURE_INIT;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific hook after L3 Features are initialized.
+ *
+ * @param[in]    L3FeatureServices   L3 Features family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_AFTER_INIT (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_AFTER_INIT *PF_L3_FEATURE_AFTER_INIT;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to save the L3 scrubber.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    ScrubSettings       Location to store current L3 scrubber settings.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_GET_L3_SCRUB_CTRL (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       UINT32 ScrubSettings[L3_SCRUBBER_CONTEXT_ARRAY_SIZE],
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_GET_L3_SCRUB_CTRL *PF_L3_FEATURE_GET_L3_SCRUB_CTRL;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to restore the L3 scrubber.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    ScrubSettings       Contains L3 scrubber settings to restore.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_SET_L3_SCRUB_CTRL (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       UINT32 ScrubSettings[L3_SCRUBBER_CONTEXT_ARRAY_SIZE],
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_SET_L3_SCRUB_CTRL *PF_L3_FEATURE_SET_L3_SCRUB_CTRL;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if HT Assist is supported.
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    PlatformConfig      Contains the runtime modifiable feature input data
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @retval       TRUE               HT Assist is supported.
+ * @retval       FALSE              HT Assist is not supported.
+ *
+ */
+typedef BOOLEAN F_HT_ASSIST_IS_SUPPORTED (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_HT_ASSIST_IS_SUPPORTED *PF_HT_ASSIST_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to Initialize HT Assist
+ *
+ * @param[in]    L3FeatureServices   L3 Features family services.
+ * @param[in]    Socket              Processor socket to enable.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+typedef VOID F_HT_ASSIST_INIT (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_HT_ASSIST_INIT *PF_HT_ASSIST_INIT;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to provide non_optimal HT Assist support
+ *
+ * @param[in]    L3FeatureServices   L3 Feature family services.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @return       TRUE                The system may be running with non-optimal settings.
+ * @return       FALSE               The system may is running optimally.
+ *
+ */
+typedef BOOLEAN F_HT_ASSIST_IS_NONOPTIMAL (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_HT_ASSIST_IS_NONOPTIMAL *PF_HT_ASSIST_IS_NONOPTIMAL;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if ATM Mode is supported.
+ *
+ * @param[in]    L3FeatureServices   L3 Features family services.
+ * @param[in]    PlatformConfig      Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @retval       TRUE               ATM Mode is supported.
+ * @retval       FALSE              ATM Mode is not supported.
+ *
+ */
+typedef BOOLEAN F_ATM_MODE_IS_SUPPORTED (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_ATM_MODE_IS_SUPPORTED *PF_ATM_MODE_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to Initialize ATM mode
+ *
+ * @param[in]    L3FeatureServices   L3 Features family services.
+ * @param[in]    Socket              Processor socket to enable.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ */
+typedef VOID F_ATM_MODE_INIT (
+  IN       L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_ATM_MODE_INIT *PF_ATM_MODE_INIT;
+
+/**
+ * Provide the interface to the L3 dependent features Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _L3_FEATURE_FAMILY_SERVICES {
+  UINT16          Revision;                             ///< Interface version
+  // Public Methods.
+  PF_L3_FEATURE_IS_SUPPORTED IsL3FeatureSupported;      ///< Method: Check if L3 dependent features are supported.
+  PF_L3_FEATURE_GET_L3_SCRUB_CTRL GetL3ScrubCtrl;       ///< Method: Save/disable the L3 scrubber.
+  PF_L3_FEATURE_SET_L3_SCRUB_CTRL SetL3ScrubCtrl;       ///< Method: Restore the L3 scrubber.
+  PF_L3_FEATURE_BEFORE_INIT HookBeforeInit;             ///< Method: Hook before enabling L3 dependent features.
+  PF_L3_FEATURE_AFTER_INIT HookAfterInit;               ///< Method: Hook after enabling L3 dependent features.
+  PF_L3_FEATURE_DISABLE_CACHE HookDisableCache;         ///< Method: Core hook just before disabling cache.
+  PF_L3_FEATURE_ENABLE_CACHE HookEnableCache;           ///< Method: Core hook just after enabling cache.
+  PF_HT_ASSIST_IS_SUPPORTED IsHtAssistSupported;        ///< Method: Check if HT Assist is supported.
+  PF_HT_ASSIST_INIT HtAssistInit;                       ///< Method: Enable HT Assist.
+  PF_HT_ASSIST_IS_NONOPTIMAL IsNonOptimalConfig;        ///< Method: Check if HT Assist is running optimally.
+  PF_ATM_MODE_IS_SUPPORTED IsAtmModeSupported;          ///< Method: Check if ATM Mode is supported.
+  PF_ATM_MODE_INIT AtmModeInit;                         ///< Method: Enable ATM Mode.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ *                          F U N C T I O N S     P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+DisableAllCaches (
+  IN       AP_EXE_PARAMS *ApExeParams
+  );
+
+AGESA_STATUS
+EnableAllCaches (
+  IN       AP_EXE_PARAMS *ApExeParams
+  );
+
+#endif  // _CPU_L3_FEATURES_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuLowPwrPstate.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuLowPwrPstate.c
new file mode 100644
index 0000000000..8d835cfcb5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuLowPwrPstate.c
@@ -0,0 +1,224 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU create low power P-state for PROCHOT_L throttling support code.
+ *
+ * Contains code that declares the AGESA CPU low power P-state related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 58314 $   @e \$Date: 2011-08-25 10:15:35 -0600 (Thu, 25 Aug 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "OptionMultiSocket.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFeatures.h"
+#include "cpuLowPwrPstate.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPULOWPWRPSTATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+EnableLowPwrPstateOnCore (
+  IN       VOID *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE LowPwrPstateFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should Low Power P-state be enabled
+ *  If all processors support Low Power P-state, reture TRUE, otherwise reture FALSE
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               Low Power P-state is supported.
+ * @retval       FALSE              Low Power P-state cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsLowPwrPstateFeatureSupported (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32              Socket;
+  BOOLEAN             IsSupported;
+  LOW_PWR_PSTATE_FAMILY_SERVICES *FamilyServices;
+
+  IsSupported = FALSE;
+  if (PlatformConfig->LowPowerPstateForProcHot == LOW_POWER_PSTATE_FOR_PROCHOT_AUTO) {
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (IsProcessorPresent (Socket, StdHeader)) {
+        GetFeatureServicesOfSocket (&LowPwrPstateFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+        if (FamilyServices != NULL) {
+          if (FamilyServices->IsLowPwrPstateSupported (FamilyServices, PlatformConfig, Socket, StdHeader)) {
+            IsSupported = TRUE;
+          } else {
+            IsSupported = FALSE;
+            break;
+          }
+        } else {
+          IsSupported = FALSE;
+          break;
+        }
+      }
+    }
+  }
+  IDS_OPTION_HOOK (IDS_LOW_POWER_PSTATE, &IsSupported, StdHeader);
+  return IsSupported;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable low power P-state
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeLowPwrPstateFeature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       BscSocket;
+  UINT32       Ignored;
+  UINT32       BscCoreNum;
+  UINT32       Core;
+  UINT32       Socket;
+  UINT32       NumberOfSockets;
+  UINT32       NumberOfCores;
+  AP_TASK      TaskPtr;
+  AGESA_STATUS IgnoredSts;
+
+  if (!IsWarmReset (StdHeader)) {
+    IDS_HDT_CONSOLE (CPU_TRACE, "    Low pwr P-state is enabled\n");
+
+    IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+    NumberOfSockets = GetPlatformNumberOfSockets ();
+
+    TaskPtr.FuncAddress.PfApTaskI = EnableLowPwrPstateOnCore;
+    TaskPtr.DataTransfer.DataSizeInDwords = 2;
+    TaskPtr.DataTransfer.DataPtr = PlatformConfig;
+    TaskPtr.DataTransfer.DataTransferFlags = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+
+    for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+      if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+        for (Core = NumberOfCores; Core != 0; Core--) {
+          if ((Socket != BscSocket) || ((Core - 1) != BscCoreNum)) {
+            ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) (Core - 1), &TaskPtr, StdHeader);
+          }
+        }
+      }
+    }
+
+    EnableLowPwrPstateOnCore (PlatformConfig, StdHeader);
+  }
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  'Local' core 0 task to enable low power P-state
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+EnableLowPwrPstateOnCore (
+  IN       VOID *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  LOW_PWR_PSTATE_FAMILY_SERVICES *FamilyServices;
+
+  GetFeatureServicesOfCurrentCore (&LowPwrPstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  FamilyServices->EnableLowPwrPstate (FamilyServices,
+                                      PlatformConfig,
+                                      StdHeader);
+}
+
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureLowPwrPstate =
+{
+  LowPwrPstate,
+  (CPU_FEAT_BEFORE_RELINQUISH_AP | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+  IsLowPwrPstateFeatureSupported,
+  InitializeLowPwrPstateFeature
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuLowPwrPstate.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuLowPwrPstate.h
new file mode 100644
index 0000000000..639ebd0c31
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuLowPwrPstate.h
@@ -0,0 +1,130 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU create low power P-state for PROCHOT_L throttling Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU low power P-state related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 49029 $   @e \$Date: 2011-03-15 19:55:06 -0600 (Tue, 15 Mar 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_LOW_PWR_PSTATE_H_
+#define _CPU_LOW_PWR_PSTATE_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+//  Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (LOW_PWR_PSTATE_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if Low Power P-state is supported.
+ *
+ * @param[in]    LowPwrPstateService Low Power P-state services.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    Socket             Zero-based socket number.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               Low Power P-state is supported.
+ * @retval       FALSE              Low Power P-state is not supported.
+ *
+ */
+typedef BOOLEAN F_LOW_PWR_PSTATE_IS_SUPPORTED (
+  IN       LOW_PWR_PSTATE_FAMILY_SERVICES *LowPwrPstateService,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       UINT32                 Socket,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_LOW_PWR_PSTATE_IS_SUPPORTED *PF_LOW_PWR_PSTATE_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to enable Low Power P-state
+ *
+ * @param[in]    LowPwrPstateService Low Power P-state services.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_LOW_PWR_PSTATE_INIT (
+  IN       LOW_PWR_PSTATE_FAMILY_SERVICES *LowPwrPstateService,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_LOW_PWR_PSTATE_INIT *PF_LOW_PWR_PSTATE_INIT;
+
+/**
+ * Provide the interface to the Low Power P-state Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _LOW_PWR_PSTATE_FAMILY_SERVICES {
+  UINT16          Revision;                                             ///< Interface version
+  // Public Methods.
+  PF_LOW_PWR_PSTATE_IS_SUPPORTED IsLowPwrPstateSupported;         ///< Method: Family specific call to check if Low Power P-state is supported.
+  PF_LOW_PWR_PSTATE_INIT         EnableLowPwrPstate;              ///< Method: Family specific call to enable Low Power P-state.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ *                          F U N C T I O N S     P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _CPU_LOW_PWR_PSTATE_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuMsgBasedC1e.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuMsgBasedC1e.c
new file mode 100644
index 0000000000..cf938fc2e5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuMsgBasedC1e.c
@@ -0,0 +1,212 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Message-based C1e feature support code.
+ *
+ * Contains code that declares the AGESA CPU C1e related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMultiSocket.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "cpuMsgBasedC1e.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUMSGBASEDC1E_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+EnableMsgC1eOnSocket (
+  IN       VOID *EntryPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE MsgBasedC1eFamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should message-based C1e be enabled
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               Message-based C1e is supported.
+ * @retval       FALSE              Message-based C1e cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsMsgBasedC1eFeatureEnabled (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  BOOLEAN          IsEnabled;
+  UINT32           Socket;
+  MSG_BASED_C1E_FAMILY_SERVICES *FamilyServices;
+
+  ASSERT (PlatformConfig->C1eMode < MaxC1eMode);
+
+  IsEnabled = FALSE;
+  if ((PlatformConfig->C1eMode == C1eModeMsgBased) || (PlatformConfig->C1eMode == C1eModeAuto)) {
+    ASSERT (PlatformConfig->C1ePlatformData < 0x10000);
+    ASSERT (PlatformConfig->C1ePlatformData != 0);
+    if ((PlatformConfig->C1ePlatformData != 0) && (PlatformConfig->C1ePlatformData < 0xFFFE)) {
+      IsEnabled = TRUE;
+      if (IsNonCoherentHt1 (StdHeader)) {
+        IsEnabled = FALSE;
+      } else {
+        for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+          if (IsProcessorPresent (Socket, StdHeader)) {
+            GetFeatureServicesOfSocket (&MsgBasedC1eFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+            if ((FamilyServices == NULL) || !FamilyServices->IsMsgBasedC1eSupported (FamilyServices, Socket, StdHeader)) {
+              IsEnabled = FALSE;
+              break;
+            }
+          }
+        }
+      }
+    }
+  }
+  return IsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable Message-based C1e
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeMsgBasedC1eFeature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  AP_TASK      TaskPtr;
+  AMD_CPU_EARLY_PARAMS CpuEarlyParams;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "    MT C1e is enabled\n");
+
+  if ((EntryPoint != CPU_FEAT_AFTER_PM_INIT) || (IsWarmReset (StdHeader))) {
+    CpuEarlyParams.PlatformConfig = *PlatformConfig;
+
+    TaskPtr.FuncAddress.PfApTaskIC = EnableMsgC1eOnSocket;
+    TaskPtr.DataTransfer.DataSizeInDwords = 2;
+    TaskPtr.DataTransfer.DataPtr = &EntryPoint;
+    TaskPtr.DataTransfer.DataTransferFlags = 0;
+    TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+    OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, &CpuEarlyParams);
+  }
+  return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  'Local' core 0 task to enable message-based C1e on it's socket.
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ * @param[in]    CpuEarlyParams     Service parameters.
+ *
+ */
+VOID
+STATIC
+EnableMsgC1eOnSocket (
+  IN       VOID *EntryPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+  )
+{
+  MSG_BASED_C1E_FAMILY_SERVICES *FamilyServices;
+
+  GetFeatureServicesOfCurrentCore (&MsgBasedC1eFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  FamilyServices->InitializeMsgBasedC1e (FamilyServices,
+                                         *((UINT64 *) EntryPoint),
+                                         &CpuEarlyParams->PlatformConfig,
+                                         StdHeader);
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureMsgBasedC1e =
+{
+  MsgBasedC1e,
+  (CPU_FEAT_AFTER_PM_INIT | CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+  IsMsgBasedC1eFeatureEnabled,
+  InitializeMsgBasedC1eFeature
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuMsgBasedC1e.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuMsgBasedC1e.h
new file mode 100644
index 0000000000..82df5038fc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuMsgBasedC1e.h
@@ -0,0 +1,128 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Message-based C1e Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU C1e related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_MSG_BASED_C1E_H_
+#define _CPU_MSG_BASED_C1E_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+//  Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (MSG_BASED_C1E_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if message-based C1e is supported.
+ *
+ * @param[in]    MsgBasedC1eServices Contains the runtime modifiable feature input data.
+ * @param[in]    Socket              Processor socket to check.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @retval       TRUE               Message-based C1e is supported.
+ * @retval       FALSE              Message-based C1e is not supported.
+ *
+ */
+typedef BOOLEAN F_MSG_BASED_C1E_IS_SUPPORTED (
+  IN       MSG_BASED_C1E_FAMILY_SERVICES *MsgBasedC1eServices,
+  IN       UINT32 Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_MSG_BASED_C1E_IS_SUPPORTED *PF_MSG_BASED_C1E_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to enable hardware C1e.
+ *
+ * @param[in]    MsgBasedC1eServices Hardware C1e services.
+ * @param[in]    EntryPoint          Timepoint designator.
+ * @param[in]    PlatformConfig      Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader           Config Handle for library, services.
+ *
+ * @return       Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_MSG_BASED_C1E_INIT (
+  IN       MSG_BASED_C1E_FAMILY_SERVICES *MsgBasedC1eServices,
+  IN       UINT64 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_MSG_BASED_C1E_INIT *PF_MSG_BASED_C1E_INIT;
+
+/**
+ * Provide the interface to the hardware C1e Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _MSG_BASED_C1E_FAMILY_SERVICES {
+  UINT16          Revision;                                             ///< Interface version
+  // Public Methods.
+  PF_MSG_BASED_C1E_IS_SUPPORTED IsMsgBasedC1eSupported;                 ///< Method: Family specific call to check if hardware C1e is supported.
+  PF_MSG_BASED_C1E_INIT InitializeMsgBasedC1e;                          ///< Method: Family specific call to enable hardware C1e.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ *                          F U N C T I O N S     P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _CPU_MSG_BASED_C1E_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateGather.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateGather.c
new file mode 100644
index 0000000000..e5749a9421
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateGather.c
@@ -0,0 +1,411 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Pstate Data Gather Function.
+ *
+ * Contains code to collect all the Pstate related information from MSRs, and PCI registers.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionPstate.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuPostInit.h"
+#include "Ids.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuApicUtilities.h"
+#include "cpuFeatures.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUPSTATEGATHER_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_PSTATE_POST_CONFIGURATION    OptionPstatePostConfiguration;  // global user config record
+extern CPU_FAMILY_SUPPORT_TABLE            PstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PStateGatherStub (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   S_CPU_AMD_PSTATE  *PStateStrucPtr
+  );
+
+AGESA_STATUS
+PStateGatherMain (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   S_CPU_AMD_PSTATE  *PStateStrucPtr
+  );
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+PStateGather (
+  IN OUT   VOID *PStateBuffer,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  PStateGatherData
+ *
+ *  Description:
+ *    This function will gather PState information from the MSRs and fill up the
+ *    pStateBuf. This buffer will be used by the PState Leveling, and PState Table
+ *    generation code later.
+ *
+ *  Parameters:
+ *    @param[in]        *PlatformConfig
+ *    @param[in, out]   *PStateStrucPtr
+ *    @param[in]        *StdHeader
+ *
+ *    @retval      AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateGatherData (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   S_CPU_AMD_PSTATE       *PStateStrucPtr,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+
+
+  AGESA_STATUS       AgesaStatus;
+
+  AGESA_TESTPOINT (TpProcCpuEntryPstateGather, StdHeader);
+  AgesaStatus = AGESA_SUCCESS;
+
+  // Gather data for ACPI Tables if ACPI P-States/C-States object generation is enabled.
+  if ((PlatformConfig->UserOptionPState) || (IsFeatureEnabled (IoCstate, PlatformConfig, StdHeader))) {
+    AgesaStatus = (*(OptionPstatePostConfiguration.PstateGather)) (StdHeader, PStateStrucPtr);
+    // Note: Split config struct into PEI/DXE halves. This one is PEI.
+  }
+
+  return AgesaStatus;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ *  PStateGatherStub
+ *
+ *  Description:
+ *     This is the default routine for use when the PState option is NOT requested.
+ *      The option install process will create and fill the transfer vector with
+ *      the address of the proper routine (Main or Stub). The link optimizer will
+ *      strip out of the .DLL the routine that is not used.
+ *
+ *  Parameters:
+ *    @param[in]        *StdHeader
+ *    @param[in, out]   *PStateStrucPtr
+ *
+ *    @retval         AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateGatherStub (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   S_CPU_AMD_PSTATE  *PStateStrucPtr
+  )
+{
+  return  AGESA_UNSUPPORTED;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ *  PStateGatherMain
+ *
+ *  Description:
+ *     This is the common routine for BSP gathering the Pstate data.
+ *
+ *  Parameters:
+ *    @param[in]        *StdHeader
+ *    @param[in, out]   *PStateStrucPtr
+ *
+ *    @retval         AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateGatherMain (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   S_CPU_AMD_PSTATE  *PStateStrucPtr
+  )
+{
+  AP_TASK                 TaskPtr;
+  UINT32                  BscSocket;
+  UINT32                  Ignored;
+  UINT32                  PopulatedSockets;
+  UINT32                  NumberOfSockets;
+  UINT32                  Socket;
+  AGESA_STATUS            IgnoredSts;
+  PSTATE_LEVELING         *PStateBufferPtr;
+  PSTATE_CPU_FAMILY_SERVICES  *FamilyServices;
+  UINT32                  MaxState;
+  UINT8                   IgnoredByte;
+
+  ASSERT (IsBsp (StdHeader, &IgnoredSts));
+
+  FamilyServices = NULL;
+  GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  ASSERT (FamilyServices != NULL);
+
+  PopulatedSockets = 1;
+  PStateBufferPtr = PStateStrucPtr->PStateLevelingStruc;
+
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+  IdentifyCore (StdHeader, &BscSocket, &Ignored, &Ignored, &IgnoredSts);
+
+  PStateStrucPtr->SizeOfBytes = sizeof (S_CPU_AMD_PSTATE);
+
+  MaxState = 0;
+  FamilyServices->GetPstateMaxState (FamilyServices, &MaxState, &IgnoredByte, StdHeader);
+
+  TaskPtr.FuncAddress.PfApTaskI = PStateGather;
+  //
+  // Calculate max buffer size in dwords that need to pass to ap task.
+  //
+  TaskPtr.DataTransfer.DataSizeInDwords = (UINT16) ((MaxState + 1) * (SIZE_IN_DWORDS (S_PSTATE_VALUES)));
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+  TaskPtr.DataTransfer.DataPtr = PStateBufferPtr;
+  TaskPtr.DataTransfer.DataTransferFlags = DATA_IN_MEMORY;
+
+  //
+  //Get P-States and fill the PStateBufferPtr for BSP
+  //
+  ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, NULL);
+
+  //
+  //Calculate next node buffer address
+  //
+  PStateBufferPtr->SocketNumber = (UINT8) BscSocket;
+  PStateBufferPtr->PStateLevelingSizeOfBytes = (UINT16) (sizeof (PSTATE_LEVELING) + (UINT32) (PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+  PStateStrucPtr->SizeOfBytes += (UINT32) (PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES));
+  PStateBufferPtr = (PSTATE_LEVELING *) ((UINT8 *) PStateBufferPtr + (UINTN) sizeof (PSTATE_LEVELING) + (UINTN) (PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+  CpuGetPStateLevelStructure (&PStateBufferPtr, PStateStrucPtr, 1, StdHeader);
+  //
+  //Get CPU P-States and fill the PStateBufferPtr for each node(BSC)
+  //
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (Socket != BscSocket) {
+      if (IsProcessorPresent (Socket, StdHeader)) {
+        PopulatedSockets++;
+        LibAmdMemFill (PStateBufferPtr, 0, sizeof (PSTATE_LEVELING), StdHeader);
+        TaskPtr.DataTransfer.DataPtr = PStateBufferPtr;
+        ApUtilRunCodeOnSocketCore ((UINT8)Socket, 0, &TaskPtr, StdHeader);
+        PStateBufferPtr->SocketNumber = (UINT8) Socket;
+        //
+        //Calculate next node buffer address
+        //
+        PStateBufferPtr->PStateLevelingSizeOfBytes = (UINT16) (sizeof (PSTATE_LEVELING) + (UINT32) (PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+        PStateStrucPtr->SizeOfBytes += PStateBufferPtr->PStateLevelingSizeOfBytes;
+        PStateBufferPtr = (PSTATE_LEVELING *) ((UINT8 *) PStateBufferPtr + (UINTN) sizeof (PSTATE_LEVELING) + (UINTN) (PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+      }
+    }
+  }
+  PStateStrucPtr->TotalSocketInSystem = PopulatedSockets;
+
+  return AGESA_SUCCESS;
+}
+/**--------------------------------------------------------------------------------------
+ *
+ *  PStateGather
+ *
+ *  Description:
+ *     This is the common routine run on each BSC for gathering Pstate data.
+ *
+ *  Parameters:
+ *    @param[in,out]    *PStateBuffer
+ *    @param[in]        *StdHeader
+ *
+ *    @retval         VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+PStateGather (
+  IN OUT   VOID                *PStateBuffer,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT32                 k;
+  UINT32                 IddVal;
+  UINT32                 IddDiv;
+  UINT32                 NodeNum;
+  UINT32                 CoreNum;
+  UINT32                 TempVar_c;
+  UINT32                 TotalEnabledPStates;
+  UINT32                 SwPstate;
+  UINT8                  BoostStates;
+  PCI_ADDR               PciAddress;
+  PSTATE_LEVELING        *PStateBufferPtr;
+  BOOLEAN                PStateEnabled;
+  PSTATE_CPU_FAMILY_SERVICES  *FamilyServices;
+  UINT32                 Socket;
+  AGESA_STATUS           IgnoredSts;
+  CPUID_DATA             CpuId;
+
+  PStateBufferPtr = (PSTATE_LEVELING *) PStateBuffer;
+  TotalEnabledPStates = 0;
+  FamilyServices = NULL;
+  PStateEnabled = FALSE;
+
+  GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  ASSERT (FamilyServices != NULL);
+
+  //
+  /// Sockets number:  code looking at PStateBufferPtr->TotalCoresInNode
+  ///        needs to know it is Processor (or socket) core count and NOT a Node Core count.
+  GetActiveCoresInCurrentSocket (&CoreNum, StdHeader);
+  PStateBufferPtr->TotalCoresInNode = (UINT8) CoreNum;
+
+  //
+  // Assume current CoreNum always zero.(BSC)
+  //
+  GetCurrentNodeAndCore (&NodeNum, &CoreNum, StdHeader);
+
+  PStateBufferPtr->CreateAcpiTables = 1;
+
+  //
+  // We need to know the max pstate state in this socket.
+  //
+  FamilyServices->GetPstateMaxState (FamilyServices, &TempVar_c, &BoostStates, StdHeader);
+  PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue = (UINT8) TempVar_c;
+  PStateBufferPtr->PStateCoreStruct[0].NumberOfBoostedStates = BoostStates;
+
+  for (k = 0; k <= TempVar_c; k++) {
+    // Check if PState is enabled
+    FamilyServices->GetPstateRegisterInfo (        FamilyServices,
+                                                   k,
+                                                   &PStateEnabled,
+                                                   &IddVal,
+                                                   &IddDiv,
+                                                   &SwPstate,
+                                                   StdHeader);
+
+    LibAmdMemFill (&(PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k]), 0, sizeof (S_PSTATE_VALUES), StdHeader);
+
+    if (PStateEnabled) {
+      FamilyServices->GetPstateFrequency (
+        FamilyServices,
+        (UINT8) k,
+        &(PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].CoreFreq),
+        StdHeader);
+
+      FamilyServices->GetPstatePower (
+        FamilyServices,
+        (UINT8) k,
+        &(PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].Power),
+        StdHeader);
+
+      PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].IddValue = IddVal;
+      PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].IddDiv = IddDiv;
+      PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber = SwPstate;
+
+      PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].PStateEnable  = 1;
+      TotalEnabledPStates++;
+    }
+  } // for (k = 0; k < MPPSTATE_MAXIMUM_STATES; k++)
+
+  // Don't create ACPI Tables if there is one or less than one PState is enabled
+  if (TotalEnabledPStates <= 1) {
+    PStateBufferPtr[0].CreateAcpiTables = 0;
+  }
+
+  //--------------------Check Again--------------------------------
+
+  IdentifyCore (StdHeader, &Socket, &NodeNum, &CoreNum, &IgnoredSts);
+  // Get the PCI address of internal die 0 as it is the only die programmed.
+  GetPciAddress (StdHeader, Socket, 0, &PciAddress, &IgnoredSts);
+  PciAddress.Address.Function = FUNC_3;
+  PciAddress.Address.Register = NORTH_BRIDGE_CAPABILITIES_REG;
+  TempVar_c = 0;
+  LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_c, StdHeader);
+  PStateBufferPtr->PStateCoreStruct[0].HtcCapable =
+    (UINT8) ((TempVar_c & 0x00000400) >> 10);    // Bit  10
+
+  TempVar_c = 0;
+  PciAddress.Address.Register = HARDWARE_THERMAL_CTRL_REG;
+  LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_c, StdHeader);
+  PStateBufferPtr->PStateCoreStruct[0].HtcPstateLimit =
+    (UINT8) ((TempVar_c & 0x70000000) >> 28);   // Bits 30:28
+
+  // Get LocalApicId from CPUID Fn0000_0001_EBX
+  LibAmdCpuidRead (AMD_CPUID_APICID_LPC_BID, &CpuId, StdHeader);
+  PStateBufferPtr->PStateCoreStruct[0].LocalApicId = (UINT8) ((CpuId.EBX_Reg & 0xFF000000) >> 24);
+}
+
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateHpcMode.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateHpcMode.c
new file mode 100644
index 0000000000..beab9905e1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateHpcMode.c
@@ -0,0 +1,221 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU create Pstate HPC mode support code.
+ *
+ * Contains code that declares the AGESA CPU Pstate HPC mode related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "OptionMultiSocket.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFeatures.h"
+#include "cpuPstateHpcMode.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUPSTATEHPCMODE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+EnablePstateHpcModeOnAps (
+  IN       VOID *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE PstateHpcModeFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should P-state HPC mode be enabled
+ *  If PlatformConfig->PStatesInHpcMode is TRUE, return TRUE, otherwise reture FALSE
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               P-state HPC mode is supported.
+ * @retval       FALSE              P-state HPC mode cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsPstateHpcModeFeatureSupported (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  BOOLEAN          IsEnabled;
+  UINT32           Socket;
+  PSTATE_HPC_MODE_FAMILY_SERVICES *FamilyServices;
+
+  IsEnabled = TRUE;
+
+  if (PlatformConfig->PStatesInHpcMode) {
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (IsProcessorPresent (Socket, StdHeader)) {
+        GetFeatureServicesOfSocket (&PstateHpcModeFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+        if (FamilyServices == NULL) {
+          IsEnabled = FALSE;
+          break;
+        }
+      }
+    }
+  } else {
+    IsEnabled = FALSE;
+  }
+  return IsEnabled;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable high performance computing (HPC mode)
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       AGESA_SUCCESS      Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializePstateHpcModeFeature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32       BscSocket;
+  UINT32       Ignored;
+  UINT32       BscCoreNum;
+  UINT32       Core;
+  UINT32       Socket;
+  UINT32       NumberOfSockets;
+  UINT32       NumberOfCores;
+  AP_TASK      TaskPtr;
+  AGESA_STATUS IgnoredSts;
+
+  if (!IsWarmReset (StdHeader)) {
+    IDS_HDT_CONSOLE (CPU_TRACE, "    P-state HPC mode is enabled\n");
+
+    IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+    NumberOfSockets = GetPlatformNumberOfSockets ();
+
+    TaskPtr.FuncAddress.PfApTaskI = EnablePstateHpcModeOnAps;
+    TaskPtr.DataTransfer.DataSizeInDwords = 2;
+    TaskPtr.DataTransfer.DataPtr = PlatformConfig;
+    TaskPtr.DataTransfer.DataTransferFlags = 0;
+    TaskPtr.ExeFlags = WAIT_FOR_CORE;
+
+    for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+      if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+        for (Core = 0; Core < NumberOfCores; Core++) {
+          if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+            ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+          }
+        }
+      }
+    }
+
+    EnablePstateHpcModeOnAps (PlatformConfig, StdHeader);
+  }
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  AP task to enable Pstate HPC mode
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+EnablePstateHpcModeOnAps (
+  IN       VOID *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  PSTATE_HPC_MODE_FAMILY_SERVICES *FamilyServices;
+
+  GetFeatureServicesOfCurrentCore (&PstateHpcModeFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  FamilyServices->EnablePstateHpcMode (FamilyServices,
+                                       PlatformConfig,
+                                       StdHeader);
+
+}
+
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeaturePstateHpcMode =
+{
+  PstateHpcMode,
+  (CPU_FEAT_BEFORE_RELINQUISH_AP | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+  IsPstateHpcModeFeatureSupported,
+  InitializePstateHpcModeFeature
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateHpcMode.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateHpcMode.h
new file mode 100644
index 0000000000..e2edd0fbf2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateHpcMode.h
@@ -0,0 +1,101 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Pstate HPC mode Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU Pstate HPC mode related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 52150 $   @e \$Date: 2011-05-03 01:01:08 -0600 (Tue, 03 May 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_PSTATE_HPC_MODE_H_
+#define _CPU_PSTATE_HPC_MODE_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_FORWARD_DECLARATION (PSTATE_HPC_MODE_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to enable P-state HPC mode
+ *
+ * @param[in]    PstateHpcModeService P-state HPC mode services.
+ * @param[in]    PlatformConfig       Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader            Config Handle for library, services.
+ *
+ * @return       Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_PSTATE_HPC_MODE_INIT (
+  IN       PSTATE_HPC_MODE_FAMILY_SERVICES *PstateHpcModeService,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_PSTATE_HPC_MODE_INIT *PF_PSTATE_HPC_MODE_INIT;
+
+/**
+ * Provide the interface to the P-state HPC mode Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _PSTATE_HPC_MODE_FAMILY_SERVICES {
+  UINT16          Revision;                                             ///< Interface version
+  // Public Methods.
+  PF_PSTATE_HPC_MODE_INIT         EnablePstateHpcMode;              ///< Method: Family specific call to enable P-state HPC mode.
+};
+/*----------------------------------------------------------------------------------------
+ *                          F U N C T I O N S     P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif  // _CPU_PSTATE_HPC_MODE_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateLeveling.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateLeveling.c
new file mode 100644
index 0000000000..3c2d7cde33
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateLeveling.c
@@ -0,0 +1,1099 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Pstate Leveling Function.
+ *
+ * Contains code to level the Pstates in a multi-socket system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionPstate.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "cpuPostInit.h"
+#include "Ids.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUPSTATELEVELING_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_PSTATE_POST_CONFIGURATION    OptionPstatePostConfiguration;  // global user config record
+extern CPU_FAMILY_SUPPORT_TABLE            PstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PutAllCoreInPState0 (
+  IN OUT   PSTATE_LEVELING    *PStateBufferPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+AGESA_STATUS
+StartPstateMsrModify (
+  IN       S_CPU_AMD_PSTATE    *CpuAmdPState,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+VOID
+STATIC
+PutCoreInPState0 (
+  IN       VOID   *PStateBuffer,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+PStateLevelingStub (
+  IN OUT   S_CPU_AMD_PSTATE   *PStateStrucPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+AGESA_STATUS
+PStateLevelingMain (
+  IN OUT   S_CPU_AMD_PSTATE   *PStateStrucPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+CorePstateRegModify (
+  IN       VOID               *CpuAmdPState,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  PStateLeveling
+ *
+ *  Description:
+ *    This function will populate the PStateBuffer, after doing the PState Leveling
+ *    Note: This function should be called for every core in the system.
+ *
+ *  Parameters:
+ *    @param[in,out]    *PStateStrucPtr
+ *    @param[in]        *StdHeader
+ *
+ *    @retval          AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateLeveling (
+  IN OUT   S_CPU_AMD_PSTATE   *PStateStrucPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  AGESA_TESTPOINT (TpProcCpuEntryPstateLeveling, StdHeader);
+  return ((*(OptionPstatePostConfiguration.PstateLeveling)) (PStateStrucPtr, StdHeader));
+  // Note: Split config struct into PEI/DXE halves. This one is PEI.
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ *  PStateLevelingStub
+ *
+ *  Description:
+ *     This is the default routine for use when the PState option is NOT requested.
+ *      The option install process will create and fill the transfer vector with
+ *      the address of the proper routine (Main or Stub). The link optimizer will
+ *      strip out of the .DLL the routine that is not used.
+ *
+ *  Parameters:
+ *    @param[in,out]    *PStateStrucPtr
+ *    @param[in]        *StdHeader
+ *
+ *    @retval         AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateLevelingStub (
+  IN OUT   S_CPU_AMD_PSTATE   *PStateStrucPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  return  AGESA_UNSUPPORTED;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ *  PStateLevelingMain
+ *
+ *  Description:
+ *     This is the common routine for creating the ACPI information tables.
+ *
+ *  Parameters:
+ *    @param[in,out]    *PStateStrucPtr
+ *    @param[in]        *StdHeader
+ *
+ *    @retval         AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateLevelingMain (
+  IN OUT   S_CPU_AMD_PSTATE   *PStateStrucPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32                   i;
+  UINT32                   k;
+  UINT32                   m;
+  UINT32                   TotalIterations;
+  UINT32                   LogicalSocketCount;
+  UINT32                   TempVar_a;
+  UINT32                   TempVar_b;
+  UINT32                   TempVar_c;
+  UINT32                   TempVar_d;
+  UINT32                   TempVar_e;
+  UINT32                   TempVar_f;
+  PCI_ADDR                 PciAddress;
+
+  UINT32                   TempFreqArray[20];
+  UINT32                   TempPowerArray[20];
+  UINT32                   TempIddValueArray[20];
+  UINT32                   TempIddDivArray[20];
+  UINT32                   TempSocketPiArray[20];
+  UINT32                   TempSwP0Array[MAX_SOCKETS_SUPPORTED];
+
+  BOOLEAN                  TempFlag1;
+  BOOLEAN                  TempFlag2;
+  BOOLEAN                  TempFlag3;
+  BOOLEAN                  TempFlag4;
+  BOOLEAN                  AllCoresHaveHtcCapEquToZeroFlag;
+  BOOLEAN                  AllCoreHaveMaxOnePStateFlag;
+  BOOLEAN                  PstateMaxValEquToPstateHtcLimitFlag;
+  BOOLEAN                  AtLeastOneCoreHasPstateHtcLimitEquToOneFlag;
+  BOOLEAN                  PstateMaxValMinusHtcPstateLimitLessThan2Flag;
+  PSTATE_LEVELING          *PStateBufferPtr;
+  PSTATE_LEVELING          *PStateBufferPtrTmp;
+  UINT32                   MaxPstateInNode;
+  AGESA_STATUS             Status;
+
+  TempFlag1 = FALSE;
+  TempFlag2 = FALSE;
+  TempFlag3 = FALSE;
+  TempFlag4 = FALSE;
+  AllCoresHaveHtcCapEquToZeroFlag = FALSE;
+  AllCoreHaveMaxOnePStateFlag = FALSE;
+  PstateMaxValEquToPstateHtcLimitFlag = FALSE;
+  AtLeastOneCoreHasPstateHtcLimitEquToOneFlag = FALSE;
+  PstateMaxValMinusHtcPstateLimitLessThan2Flag = FALSE;
+  PStateBufferPtr = PStateStrucPtr->PStateLevelingStruc;
+  Status = AGESA_SUCCESS;
+
+  if (PStateBufferPtr[0].SetPState0 == PSTATE_FLAG_1) {
+    PStateBufferPtr[0].AllCpusHaveIdenticalPStates = TRUE;
+    PStateBufferPtr[0].InitStruct = 1;
+    return AGESA_UNSUPPORTED;
+  }
+
+  LogicalSocketCount = PStateStrucPtr->TotalSocketInSystem;
+  ASSERT (LogicalSocketCount <= MAX_SOCKETS_SUPPORTED);
+
+  // This section of code will execute only for "core 0" i.e. BSP
+  // Read P-States of all the cores.
+  if (PStateBufferPtr[0].InitStruct == 0) {
+    // Determine 'software' P0 indices for each socket
+    for (i = 0; i < LogicalSocketCount; i++) {
+      CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+      TempSwP0Array[i] = (UINT32) (PStateBufferPtrTmp->PStateCoreStruct[0].NumberOfBoostedStates);
+    }
+
+    // Check if core frequency and power are same across all sockets.
+    TempFlag1 = FALSE;
+    for (i = 1; i < LogicalSocketCount; i++) {
+      CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+      if ((PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue != PStateBufferPtr[0].PStateCoreStruct[0].PStateMaxValue)) {
+        TempFlag1 = TRUE;
+        break;
+      }
+      MaxPstateInNode = PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue;
+      for (k = TempSwP0Array[i]; k <= MaxPstateInNode; k++) {
+        if ((PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[k].CoreFreq !=
+             PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].CoreFreq) ||
+            (PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[k].Power !=
+             PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].Power)) {
+          TempFlag1 = TRUE;
+          break; // Come out of the inner FOR loop
+        }
+      }
+      if (TempFlag1) {
+        break; // Come out of the outer FOR loop
+      }
+    }
+
+    if (!TempFlag1) {
+      // No need to do pStateLeveling, or writing to pState MSR registers
+      // if all CPUs have Identical PStates
+      PStateBufferPtr[0].AllCpusHaveIdenticalPStates = TRUE;
+      PStateBufferPtr[0].InitStruct = 1;
+      PutAllCoreInPState0 (PStateBufferPtr, StdHeader);
+      return AGESA_UNSUPPORTED;
+    } else {
+      PStateBufferPtr[0].AllCpusHaveIdenticalPStates = FALSE;
+    }
+
+    // 1_b) & 1_c)
+    TempFlag1 = FALSE;
+    TempFlag2 = FALSE;
+    for (i = 0; i < LogicalSocketCount; i++) {
+      CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+      if (PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue == TempSwP0Array[i]) {
+        TempFlag1 = TRUE;
+      } else {
+        TempFlag2 = TRUE;
+      }
+      if (PStateBufferPtrTmp->PStateCoreStruct[0].HtcCapable == 0) {
+        TempFlag3 = TRUE;
+      } else {
+        TempFlag4 = TRUE;
+      }
+
+      if ((PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue -
+           PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit) < 2) {
+        PstateMaxValMinusHtcPstateLimitLessThan2Flag = TRUE;
+      }
+
+      if (PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue ==
+          PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit) {
+        PstateMaxValEquToPstateHtcLimitFlag = TRUE;
+      }
+
+      if (PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit == 1) {
+        AtLeastOneCoreHasPstateHtcLimitEquToOneFlag = TRUE;
+      }
+    }
+
+    // Do general setup of flags, that we may use later
+    // Implementation of (1_b)
+    if (TempFlag1 && TempFlag2) {
+      //
+      //Processors with only one enabled P-state (F3xDC[PstateMaxVal]=000b) cannot be mixed in a system with
+      //processors with more than one enabled P-state (F3xDC[PstateMaxVal]!=000b).
+      //
+      PStateBufferPtr[0].InitStruct = 1;
+      PStateBufferPtr[0].CreateAcpiTables = 0;
+      PutAllCoreInPState0 (PStateBufferPtr, StdHeader);
+      return AGESA_UNSUPPORTED;
+    } else if (TempFlag1 && !TempFlag2) {
+      //
+      //all processors have only 1 enabled P-state
+      //
+      AllCoreHaveMaxOnePStateFlag = TRUE;
+      PStateBufferPtr[0].OnlyOneEnabledPState = TRUE;
+    }
+
+    // Processors with F3xE8[HTC_CAPABLE] = 1 can not be
+    // mixed in system with processors with F3xE8[HTC_CAPABLE] = 0.
+    if (TempFlag3 && TempFlag4) {
+      PStateBufferPtr[0].InitStruct = 1;
+      PStateBufferPtr[0].CreateAcpiTables = 0;
+      PutAllCoreInPState0 (PStateBufferPtr, StdHeader);
+      return AGESA_UNSUPPORTED;
+    }
+
+    if (TempFlag3) {
+      //
+      //If code run to here means that all processors do not have HTC_CAPABLE.
+      //
+      AllCoresHaveHtcCapEquToZeroFlag = TRUE;
+    }
+
+    //--------------------------------------------------------------------------------
+    // S T E P - 2
+    //--------------------------------------------------------------------------------
+    // Now run the PState Leveling Algorithm which will create mixed CPU P-State
+    // Tables.
+    // Follow the algorithm in the latest BKDG
+    // -------------------------------------------------------------------------------
+    // Match P0 CPU COF for all CPU cores to the lowest P0 CPU COF value in the
+    // coherent fabric, and match P0 power for all CPU cores to the highest P0 power
+    // value in the coherent fabric.
+    // 2_a) If all processors have only 1 enabled P-State BIOS must write the
+    //      appropriate CpuFid value resulting from the matched CPU COF to all
+    //      copies of MSRC001_0070[CpuFid], and exit the sequence (No further
+    //      steps are executed)
+    //--------------------------------------------------------------------------------
+    // Identify the lowest P0 Frequency and maximum P0 Power
+    TempVar_d = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSwP0Array[0]].CoreFreq;
+    TempVar_e = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSwP0Array[0]].Power;
+    TempVar_a = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSwP0Array[0]].IddValue;
+    TempVar_b = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSwP0Array[0]].IddDiv;
+
+    for (i = 0; i < LogicalSocketCount; i++) {
+      CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+      if (TempVar_d > PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].CoreFreq) {
+        TempVar_d = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].CoreFreq;
+      }
+
+      if (TempVar_e < PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].Power) {
+        TempVar_e = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].Power;
+        TempVar_a = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].IddValue;
+        TempVar_b = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].IddDiv;
+      }
+    }
+
+    // Set P0 Frequency and Power for all CPUs
+    for (i = 0; i < LogicalSocketCount; i++) {
+      CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+      PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].CoreFreq = TempVar_d;
+      PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].Power = TempVar_e;
+      PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].IddValue = TempVar_a;
+      PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].IddDiv = TempVar_b;
+    }
+
+    // 2_a)
+    if (!AllCoreHaveMaxOnePStateFlag) {
+      //--------------------------------------------------------------------------
+      // STEP - 3
+      //--------------------------------------------------------------------------
+      // Match the CPU COF and power for P-states used by HTC. Skip to step 4
+      // is any processor reports F3xE8[HTC_Capable] = 0;
+      // 3_a) Set F3x64[HtcPstateLimit] = 001b and F3x68[StcPstateLimit] = 001b for
+      //      processors with F3x64[HtcPstateLimit] = 000b.
+      // 3_b) Identify the lowest CPU COF for all processors in the P-state
+      //      pointed to by [The Hardware Thermal Control (HTC) Register]
+      //      F3x64[HtcPstateLimit]
+      // 3_c) Modify the CPU COF pointed to by [The Hardware Thermal Control
+      //      (HTC) Register] F3x64[HtcPstateLimit] for all processors to the
+      //      previously identified lowest CPU COF value.
+      // 3_d) Identify the highest power for all processors in the P-state
+      //      pointed to by [The Hardware Thermal Control (HTC) Register]
+      //      F3x64[HtcPstateLimit].
+      // 3_e) Modify the power pointed to by [The Hardware Thermal Control (HTC)
+      //      Register] F3x64[HtcPstateLimit] to the previously identified
+      //      highest power value.
+      if (!AllCoresHaveHtcCapEquToZeroFlag) {
+        // 3_a)
+        for (i = 0; i < LogicalSocketCount; i++) {
+          CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+          if (PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit == 0) {
+            // To Be Done (Set Htc and Stc PstateLimit values)
+            // for this CPU (using PCI address space)
+            for (k = 0; k < (UINT8)GetPlatformNumberOfModules (); k++) {
+              if (GetPciAddress (StdHeader, PStateBufferPtrTmp->SocketNumber, k, &PciAddress, &Status)) {
+                // Set F3x64[HtcPstateLimit] = 001b
+                PciAddress.Address.Function = FUNC_3;
+                PciAddress.Address.Register = HARDWARE_THERMAL_CTRL_REG;
+                LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+                // Bits 30:28
+                TempVar_d = (TempVar_d & 0x8FFFFFFF) | 0x10000000;
+                LibAmdPciWrite (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+
+                // Set F3x68[StcPstateLimit] = 001b
+                PciAddress.Address.Register = SOFTWARE_THERMAL_CTRL_REG;
+                LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+                // Bits 28:30
+                TempVar_d = (TempVar_d & 0x8FFFFFFF) | 0x10000000;
+                LibAmdPciWrite (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+              }
+            }
+            // Set LocalBuffer
+            PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit = 1;
+            if ((PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue - 1) < 2) {
+              PstateMaxValMinusHtcPstateLimitLessThan2Flag = TRUE;
+            }
+
+            if (PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue == 1) {
+              PstateMaxValEquToPstateHtcLimitFlag = TRUE;
+            }
+          }
+
+          if (PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit == 1) {
+            AtLeastOneCoreHasPstateHtcLimitEquToOneFlag = TRUE;
+          }
+        }
+
+        // 3_b) and 3_d)
+        TempVar_a = PStateBufferPtr[0].PStateCoreStruct[0].HtcPstateLimit;
+        TempVar_d = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].CoreFreq;
+        TempVar_e = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].Power;
+        TempVar_f = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].IddValue;
+        TempVar_c = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].IddDiv;
+        for (i = 0; i < LogicalSocketCount; i++) {
+          CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+          for (k = 0; k < 1; k++) {
+            TempVar_b = PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit;
+            if (TempVar_d > PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].CoreFreq) {
+              TempVar_d = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].CoreFreq;
+            }
+
+            if (TempVar_e < PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].Power) {
+              TempVar_e = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].Power;
+              TempVar_f = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].IddValue;
+              TempVar_c = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].IddDiv;
+            }
+          }
+        }
+
+        // 3_c) and 3_e)
+        for (i = 0; i < LogicalSocketCount; i++) {
+          CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+          TempVar_a = PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit;
+          PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].CoreFreq = TempVar_d;
+          PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].Power = TempVar_e;
+          PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].IddValue = TempVar_f;
+          PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].IddDiv = TempVar_c;
+        }
+      } // if(AllCoresHaveHtcCapEquToZeroFlag)
+
+
+      //--------------------------------------------------------------------------
+      // STEP - 4
+      //--------------------------------------------------------------------------
+      // Match the CPU COF and power for the lowest performance P-state:
+      // 4_a) If F3xDC[PstateMaxVal] = F3x64[HtcPstateLimit] for any processor,
+      //      set PstateEn = 0 for all the P-states greater than
+      //      F3x64[HtcPstateLimit] for all processors.
+      // 4_b) Identify the lowest CPU COF for all processors in the P-state
+      //      pointed to by F3xDC[PstateMaxVal].
+      // 4_c) Modify the CPU COF for all processors in the P-state pointed to by
+      //      F3xDC[PstateMaxVal] to the previously identified lowest CPU COF
+      //      value.
+      // 4_d) Identify the highest power for all processors in the P-state
+      //      pointed to by F3xDC[PstateMaxVal].
+      // 4_e) Modify the power for all processors in the P-state pointed to by
+      //      F3xDC[PstateMaxVal] to the previously identified highest power
+      //      value.
+
+      // 4_a)
+      if (PstateMaxValEquToPstateHtcLimitFlag) {
+        for (i = 0; i < LogicalSocketCount; i++) {
+          CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+          TempVar_b = PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit + 1;
+          for (k = TempVar_b; k <= PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue; k++) {
+            PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].PStateEnable = 0;
+          }
+          //--------------------------------------------------------------------------
+          // STEP - 5
+          //--------------------------------------------------------------------------
+          // 5_a) Modify F3xDC[PstateMaxVal] to indicate the lowest performance
+          //      P-state with PstateEn set for each processor (Step 4 can disable
+          //      P-states pointed to by F3xDC[PstateMaxVal])
+
+          // Use this value of HtcPstateLimit to program the
+          // F3xDC[pStateMaxValue]
+          TempVar_e = PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit;
+          TempVar_e <<= 8;
+          // Bits 10:8
+
+          for (m = 0; m < (UINT8)GetPlatformNumberOfModules (); m++) {
+            if (GetPciAddress (StdHeader, PStateBufferPtrTmp->SocketNumber, m, &PciAddress, &Status)) {
+              PciAddress.Address.Function = FUNC_3;
+              PciAddress.Address.Register = CLOCK_POWER_TIMING_CTRL2_REG;
+              LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+              TempVar_d = (TempVar_d & 0xFFFFF8FF) | TempVar_e;
+              LibAmdPciWrite (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+            }
+          }//End of step 5
+        }
+      }// End of 4_a)
+
+      // 4_b) and 4_d)
+      TempVar_a = PStateBufferPtr[0].PStateCoreStruct[0].PStateMaxValue;
+      TempVar_d = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].CoreFreq;
+      TempVar_e = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].Power;
+      TempVar_f = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].IddValue;
+      TempVar_c = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].IddDiv;
+
+      for (i = 0; i < LogicalSocketCount; i++) {
+        CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+        TempVar_b = PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue;
+        if (TempVar_d >
+            PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].CoreFreq) {
+          TempVar_d =
+          PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].CoreFreq;
+        }
+
+        if (TempVar_e < PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].Power) {
+          TempVar_e = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].Power;
+          TempVar_f = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].IddValue;
+          TempVar_c = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].IddDiv;
+        }
+      }
+
+      // 4_c) and 4_e)
+      for (i = 0; i < LogicalSocketCount; i++) {
+        CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+        TempVar_a = PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue;
+        PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].CoreFreq = TempVar_d;
+        PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].Power = TempVar_e;
+        PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].IddValue = TempVar_f;
+        PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].IddDiv = TempVar_c;
+      }
+
+
+      //--------------------------------------------------------------------------
+      // STEP - 6
+      //--------------------------------------------------------------------------
+      // Match the CPU COF and power for upper intermediate performance
+      // P-state(s):
+      // Upper intermediate PStates = PStates between (Not including) P0 and
+      // F3x64[HtcPstateLimit]
+      // 6_a) If F3x64[HtcPstateLimit] = 001b for any processor, set PstateEn = 0
+      //      for enabled upper intermediate P-states for all processors with
+      //      F3x64[HtcPstateLimit] > 001b and skip the remaining actions for
+      //      this numbered step.
+      // 6_b) Define each of the available upper intermediate P-states; for each
+      //      processor concurrently evaluate the following loop; when any
+      //      processor falls out of the loop (runs out of available upper
+      //      intermediate Pstates) all other processors have their remaining
+      //      upper intermediate P-states invalidated (PstateEn = 0);
+      //      for (i = F3x64[HtcPstateLimit] - 1; i > 0; i--)
+      //         - Identify the lowest CPU COF for P(i).
+      //         - Identify the highest power for P(i).
+      //         - Modify P(i) CPU COF for all processors to the previously
+      //           identified lowest CPU COF value.
+      //         - Modify P(i) power for all processors to the previously
+      //           identified highest power value.
+
+      // 6_a)
+      if (AtLeastOneCoreHasPstateHtcLimitEquToOneFlag) {
+        for (i = 0; i < LogicalSocketCount; i++) {
+          CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+          for (k = TempSwP0Array[i] + 1; k < (PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit); k++) {
+            if (PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit > 1) {
+              // Make a function call to clear the
+              // structure values
+              PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].PStateEnable = 0;
+            }
+          }
+        }
+      }
+      // 6_b)
+      else {
+        // Identify Lowest Frequency and Highest Power
+        TotalIterations = 0;
+        TempFlag1 = TRUE;
+
+        for (i = 0; i < LogicalSocketCount; i++) {
+          CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+          TempSocketPiArray[i] = PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit - 1;
+        }
+
+        do {
+          //For first socket, try to find a candidate
+          if (TempSocketPiArray[0] != TempSwP0Array[0]) {
+            while (PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].PStateEnable == 0) {
+              TempSocketPiArray[0] = TempSocketPiArray[0] - 1;
+              if (TempSocketPiArray[0] == TempSwP0Array[0]) {
+                TempFlag1 = FALSE;
+                break;
+              }
+            }
+          } else {
+            TempFlag1 = FALSE;
+          }
+          if (TempFlag1) {
+            TempFreqArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].CoreFreq;
+            TempPowerArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].Power;
+            TempIddValueArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].IddValue;
+            TempIddDivArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].IddDiv;
+
+            //Try to find next candidate
+            for (i = 1; i < LogicalSocketCount; i++) {
+              CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+              if (TempSocketPiArray[i] != TempSwP0Array[i]) {
+                while (PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].PStateEnable == 0) {
+                  TempSocketPiArray[i]--;
+                  if (TempSocketPiArray[i] == TempSwP0Array[i]) {
+                    TempFlag1 = FALSE;
+                    break;
+                  }
+                }//end while
+              } else {
+                TempFlag1 = FALSE;
+              }
+
+            } //end for LogicalSocketCount
+          }
+
+          if (TempFlag1) {
+            for (i = 0; i < LogicalSocketCount; i++) {
+              //
+              //Compare
+              //
+              CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+              if (TempFreqArray[TotalIterations] > PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq) {
+                TempFreqArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq;
+              }
+
+              if (TempPowerArray[TotalIterations] < PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power) {
+                TempPowerArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power;
+                TempIddValueArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddValue;
+                TempIddDivArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddDiv;
+              }
+            }
+            // Modify (Pi) CPU COF and Power for all the CPUs
+            for (i = 0; i < LogicalSocketCount; i++) {
+              CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+              PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq = TempFreqArray[TotalIterations];
+              PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power    = TempPowerArray[TotalIterations];
+              PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddValue = TempIddValueArray[TotalIterations];
+              PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddDiv   = TempIddDivArray[TotalIterations];
+              TempSocketPiArray[i] = TempSocketPiArray[i] - 1;
+            }
+          } else {
+            for (i = 0; i < LogicalSocketCount; i++) {
+              CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+              for (m = TempSocketPiArray[i]; m > TempSwP0Array[i]; m--) {
+                PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[m].PStateEnable = 0;
+              }
+            }
+          }
+
+          TotalIterations++;
+        } while (TempFlag1);
+
+      } // else
+
+      //--------------------------------------------------------------------------
+      // STEP - 7
+      //--------------------------------------------------------------------------
+      // Match the CPU COF and power for lower intermediate performance P - state(s)
+      // Lower Intermediate Pstates = Pstates between (not including)
+      // F3x64[HtcPstateLimit] and F3xDC[PstateMaxVal]
+      // 7_a) If F3xDC[PstateMaxVal] - F3x64[HtcPstateLimit] < 2 for any
+      //      processor, set PstateEn = 0 for enabled lower intermediate P - states
+      //      for all processors with (F3xDC[PstateMaxVal] -
+      //      F3x64[HtcPstateLimit] > 1) and skip the remaining actions for this
+      //      numbered step.
+      // 7_b) Define each of the available lower intermediate P-states; for each
+      //      processor concurrently evaluate the following loop; when any
+      //      processor falls out of the loop (runs out of available lower
+      //      intermediate Pstates) all other processors have their remaining
+      //      lower intermediate P-states invalidated (PstateEn = 0);
+      //      for (i = F3xDC[PstateMaxVal]-1; i > F3x64[HtcPstateLimit]; i--)
+      //         - Identify the lowest CPU COF for P-states between
+      //           (not including) F3x64[HtcPstateLimit] and P(i).
+      //         - Identify the highest power for P-states between
+      //           (not including) F3x64[HtcPstateLimit] and P(i).
+      //         - Modify P(i) CPU COF for all processors to the previously
+      //           identified lowest CPU COF value.
+      //         - Modify P(i) power for all processors to the previously
+      //           identified highest power value.
+
+
+      // 7_a)
+      if (PstateMaxValMinusHtcPstateLimitLessThan2Flag) {
+        for (i = 0; i < LogicalSocketCount; i++) {
+          CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+
+          for (k = PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue - 1;
+              k > PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit;
+              k--) {
+            if ((PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue -
+                 PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit) > 1) {
+              PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].PStateEnable = 0;
+            }
+          }
+        }
+      }
+
+      // 7_b)
+      else {
+        // Identify Lowest Frequency and Highest Power
+
+        TotalIterations = 0;
+        TempFlag1 = TRUE;
+
+        for (i = 0; i < LogicalSocketCount; i++) {
+          CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+          TempSocketPiArray[i] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue - 1;
+        }
+
+        do {
+          //For first socket, try to find a candidate
+          if (TempSocketPiArray[0] != PStateBufferPtr[0].PStateCoreStruct[0].HtcPstateLimit) {
+            while (PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].PStateEnable == 0) {
+              TempSocketPiArray[0] = TempSocketPiArray[0] - 1;
+              if (TempSocketPiArray[0] == PStateBufferPtr[0].PStateCoreStruct[0].HtcPstateLimit) {
+                TempFlag1 = FALSE;
+                break;
+              }
+            }
+          } else {
+            TempFlag1 = FALSE;
+          }
+          if (TempFlag1) {
+            TempFreqArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].CoreFreq;
+            TempPowerArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].Power;
+            TempIddValueArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].IddValue;
+            TempIddDivArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].IddDiv;
+
+            //Try to find next candidate
+            for (i = 1; i < LogicalSocketCount; i++) {
+              CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+              if (TempSocketPiArray[i] != PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit) {
+                while (PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].PStateEnable == 0) {
+                  TempSocketPiArray[i]--;
+                  if (TempSocketPiArray[i] == PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit) {
+                    TempFlag1 = FALSE;
+                    break;
+                  }
+                }//end while
+              } else {
+                TempFlag1 = FALSE;
+              }
+            } //end for LogicalSocketCount
+          }
+
+          if (TempFlag1) {
+            for (i = 0; i < LogicalSocketCount; i++) {
+              //
+              //Compare
+              //
+              CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+              if (TempFreqArray[TotalIterations] > PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq) {
+                TempFreqArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq;
+              }
+              if (TempPowerArray[TotalIterations] < PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power) {
+                TempPowerArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power;
+                TempIddValueArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddValue;
+                TempIddDivArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddDiv;
+              }
+            }
+            // Modify (Pi) CPU COF and Power for all the CPUs
+            for (i = 0; i < LogicalSocketCount; i++) {
+              CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+              PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq = TempFreqArray[TotalIterations];
+              PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power    = TempPowerArray[TotalIterations];
+              PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddValue = TempIddValueArray[TotalIterations];
+              PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddDiv   = TempIddDivArray[TotalIterations];
+              TempSocketPiArray[i] = TempSocketPiArray[i] - 1;
+            }
+          } else {
+            for (i = 0; i < LogicalSocketCount; i++) {
+              CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+              for (m = TempSocketPiArray[i]; m > PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit; m--) {
+                PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[m].PStateEnable = 0;
+              }
+            }
+          }
+          TotalIterations++;
+        } while (TempFlag1);
+      } // else
+    } // if(!AllCoreHaveMaxOnePStateFlag)
+
+    PStateBufferPtr[0].InitStruct = 1;
+  } // CurrentCore
+
+
+  // Update the pState MSRs
+  // This can be done only by individual core
+  StartPstateMsrModify (PStateStrucPtr, StdHeader);
+
+  //----------------------------------------------------------------------------------
+  // STEP - 8
+  //----------------------------------------------------------------------------------
+  // Place all cores into a valid COF and VID configuration corresponding to an
+  // enabled P-state:
+  // 8_a) Select an enabled P-state != to the P-state pointed to by
+  //      MSRC001_0063[CurPstate] for each core.
+  // 8_b) Transition all cores to the selected P-states by writing the Control value
+  //      from the_PSS object corresponding to the selected P-state to
+  //      MSRC001_0062[PstateCmd].
+  // 8_c) Wait for all cores to report the Status value from the _PSS object
+  //      corresponding to the selected P-state in MSRC001_0063[CurPstate].
+  //
+  PutAllCoreInPState0 (PStateBufferPtr, StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  PutAllCoreInPState0
+ *
+ *  Description:
+ *    This function will put core pstate to p0.
+ *
+ *  Parameters:
+ *    @param[in,out]    *PStateBufferPtr
+ *    @param[in]        *StdHeader
+ *
+ *    @retval          AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PutAllCoreInPState0 (
+  IN OUT   PSTATE_LEVELING    *PStateBufferPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  AP_TASK                 TaskPtr;
+  UINT32                  BscSocket;
+  UINT32                  Ignored;
+  UINT32                  BscCoreNum;
+  UINT32                  Core;
+  UINT32                  Socket;
+  UINT32                  NumberOfSockets;
+  UINT32                  NumberOfCores;
+  AGESA_STATUS            IgnoredSts;
+
+  TaskPtr.FuncAddress.PfApTaskI = PutCoreInPState0;
+  TaskPtr.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (PSTATE_LEVELING);
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+  TaskPtr.DataTransfer.DataPtr = PStateBufferPtr;
+  TaskPtr.DataTransfer.DataTransferFlags = DATA_IN_MEMORY;
+
+  IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  PutCoreInPState0 (PStateBufferPtr, StdHeader);
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+      for (Core = 0; Core < NumberOfCores; Core++) {
+        if ((Socket != (UINT32) BscSocket) || (Core != (UINT32) BscCoreNum)) {
+          ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+        }
+      }
+    }
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  CorePstateRegModify
+ *
+ *  Description:
+ *    This function will setting the Pstate MSR to each APs base on Pstate Buffer.
+ *    Note: This function should be called for every core in the system.
+ *
+ *  Parameters:
+ *    @param[in,out]    *CpuAmdPState
+ *    @param[in]        *StdHeader
+ *
+ *    @retval          VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+CorePstateRegModify (
+  IN       VOID               *CpuAmdPState,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  PSTATE_CPU_FAMILY_SERVICES   *FamilySpecificServices;
+  FamilySpecificServices = NULL;
+
+  GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilySpecificServices, StdHeader);
+  ASSERT (FamilySpecificServices != NULL)
+  FamilySpecificServices->SetPStateLevelReg  (FamilySpecificServices, (S_CPU_AMD_PSTATE *) CpuAmdPState, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will set msr on all cores of all nodes.
+ *
+ * @param[in]     CpuAmdPState  Pointer to S_CPU_AMD_PSTATE.
+ * @param[in]     StdHeader     Header for library and services.
+ *
+ * @retval        AGESA_SUCCESS  Always succeeds
+ *
+ */
+AGESA_STATUS
+StartPstateMsrModify (
+  IN       S_CPU_AMD_PSTATE    *CpuAmdPState,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  AP_TASK                 TaskPtr;
+  UINT32                  BscSocket;
+  UINT32                  Ignored;
+  UINT32                  BscCoreNum;
+  UINT32                  Core;
+  UINT32                  Socket;
+  UINT32                  NumberOfSockets;
+  UINT32                  NumberOfCores;
+  AGESA_STATUS            IgnoredSts;
+
+  TaskPtr.FuncAddress.PfApTaskI = CorePstateRegModify;
+  TaskPtr.DataTransfer.DataSizeInDwords = (UINT16) (CpuAmdPState->SizeOfBytes / 4 + 1);
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+  TaskPtr.DataTransfer.DataPtr = CpuAmdPState;
+  TaskPtr.DataTransfer.DataTransferFlags = DATA_IN_MEMORY;
+
+  IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  CorePstateRegModify (CpuAmdPState, StdHeader);
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+      for (Core = 0; Core < NumberOfCores; Core++) {
+        if ((Socket != (UINT32) BscSocket) || (Core != (UINT32) BscCoreNum)) {
+          ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+        }
+      }
+    }
+  }
+
+  return AGESA_SUCCESS;
+}
+
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  CpuGetPStateLevelStructure
+ *
+ *  Description:
+ *    Based on the LogicalSocketNumber, this function will return a pointer
+ *      point to the accurate offset of the PSTATE_LEVELING structure.
+ *
+ *  Parameters:
+ *    @param[in,out]          *PStateBufferPtr
+ *    @param[in]              *CpuAmdPState
+ *    @param[in]              LogicalSocketNumber
+ *    @param[in]              *StdHeader
+ *
+ *    @retval         VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+CpuGetPStateLevelStructure (
+     OUT   PSTATE_LEVELING     **PStateBufferPtr,
+  IN       S_CPU_AMD_PSTATE    *CpuAmdPState,
+  IN       UINT32              LogicalSocketNumber,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  PSTATE_LEVELING         *PStateBufferPtrTmp;
+  UINT32                  i;
+
+  if (LogicalSocketNumber > CpuAmdPState->TotalSocketInSystem) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  PStateBufferPtrTmp = CpuAmdPState->PStateLevelingStruc;
+
+  for (i = 1; i <= LogicalSocketNumber; i++) {
+    PStateBufferPtrTmp = (PSTATE_LEVELING *) ((UINT8 *) PStateBufferPtrTmp + ((UINTN) PStateBufferPtrTmp->PStateLevelingSizeOfBytes));
+  }
+
+  *PStateBufferPtr = PStateBufferPtrTmp;
+
+  return AGESA_SUCCESS;
+}
+
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  PutCoreInPState0
+ *
+ *  Description:
+ *    This function will take the CPU core into P0
+ *
+ *  Parameters:
+ *    @param[in]         *PStateBuffer
+ *    @param[in]         *StdHeader
+ *
+ *    @retval         VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+STATIC
+PutCoreInPState0 (
+  IN       VOID   *PStateBuffer,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPU_SPECIFIC_SERVICES   *FamilySpecificServices;
+  PSTATE_LEVELING         *PStateBufferPtr;
+
+  PStateBufferPtr = (PSTATE_LEVELING *) PStateBuffer;
+
+  if ((PStateBufferPtr[0].SetPState0 == PSTATE_FLAG_1 ) ||
+     (PStateBufferPtr[0].SetPState0 == PSTATE_FLAG_2)) {
+    return;
+  }
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+  FamilySpecificServices->TransitionPstate  (FamilySpecificServices, (UINT8) 0, (BOOLEAN) FALSE, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateTables.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateTables.c
new file mode 100644
index 0000000000..4539016490
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateTables.c
@@ -0,0 +1,891 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD PSTATE, ACPI table related API functions.
+ *
+ * Contains code that generates the _PSS, _PCT, and other ACPI tables.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionPstate.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "heapManager.h"
+#include "Ids.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+#include "cpuPstateTables.h"
+#include "cpuFeatures.h"
+#include "cpuIoCstate.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUPSTATETABLES_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_PSTATE_LATE_CONFIGURATION    OptionPstateLateConfiguration;  // global user config record
+extern CPU_FAMILY_SUPPORT_TABLE            PstateFamilyServiceTable;
+extern CPU_FAMILY_SUPPORT_TABLE            IoCstateFamilyServiceTable;
+
+STATIC ACPI_TABLE_HEADER  ROMDATA CpuSsdtHdrStruct =
+{
+  {'S','S','D','T'},
+  0,
+  1,
+  0,
+  {'A','M','D',' ',' ',' '},
+  {'P','O','W','E','R','N','O','W'},
+  1,
+  {'A','M','D',' '},
+  1
+};
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT32
+STATIC
+CalAcpiTablesSize (
+  IN       S_CPU_AMD_PSTATE       *AmdPstatePtr,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+AGESA_STATUS
+GenerateSsdtStub (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **SsdtPtr
+  );
+
+UINT32
+CreateAcpiTablesStub (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PSTATE_LEVELING        *PStateLevelingBuffer,
+  IN OUT   VOID                   **SsdtPtr,
+  IN       UINT8                  LocalApicId,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+UINT32
+CreatePStateAcpiTables (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PSTATE_LEVELING        *PStateLevelingBuffer,
+  IN OUT   VOID                   **SsdtPtr,
+  IN       UINT8                  LocalApicId,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+UINT32
+CreateCStateAcpiTables (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PSTATE_LEVELING        *PStateLevelingBuffer,
+  IN OUT   VOID                   **SsdtPtr,
+  IN       UINT8                  LocalApicId,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+AGESA_STATUS
+GenerateSsdt (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **SsdtPtr
+  );
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  CalAcpiTablesSize
+ *
+ *  Description:
+ *    This function will calculate the size of ACPI PState tables
+ *
+ *  Parameters:
+ *    @param[in]     *AmdPstatePtr
+ *    @param[in]     *PlatformConfig
+ *    @param[in]     *StdHeader
+ *
+ *    @retval      UINT32
+ *
+ *---------------------------------------------------------------------------------------
+ */
+UINT32
+STATIC
+CalAcpiTablesSize (
+  IN       S_CPU_AMD_PSTATE       *AmdPstatePtr,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                    ScopeSize;
+  UINT32                    CoreCount;
+  UINT32                    SocketCount;
+  UINT32                    MaxCoreNumberInCurrentSocket;
+  UINT32                    MaxSocketNumberInSystem;
+  UINT32                    MaxPstateNumberInCurrentCore;
+  UINT32                    CstateAcpiObjSize;
+  PSTATE_LEVELING           *PStateLevelingBufferStructPtr;
+  IO_CSTATE_FAMILY_SERVICES *IoCstateFamilyServices;
+
+  ScopeSize = sizeof (ACPI_TABLE_HEADER);
+  CstateAcpiObjSize = 0;
+  IoCstateFamilyServices = NULL;
+
+  PStateLevelingBufferStructPtr = AmdPstatePtr->PStateLevelingStruc;
+  MaxSocketNumberInSystem = AmdPstatePtr->TotalSocketInSystem;
+
+  if (IsFeatureEnabled (IoCstate, PlatformConfig, StdHeader)) {
+    GetFeatureServicesOfCurrentCore (&IoCstateFamilyServiceTable, (CONST VOID **)&IoCstateFamilyServices, StdHeader);
+    // If we're supporting multiple families, only proceed when IO Cstate family services are available
+    if (IoCstateFamilyServices != NULL) {
+      CstateAcpiObjSize = IoCstateFamilyServices->GetAcpiCstObj (IoCstateFamilyServices, PlatformConfig, StdHeader);
+    }
+  }
+
+  for (SocketCount = 0; SocketCount < MaxSocketNumberInSystem; SocketCount++) {
+    MaxCoreNumberInCurrentSocket = PStateLevelingBufferStructPtr->TotalCoresInNode;
+    for (CoreCount = 0; CoreCount < MaxCoreNumberInCurrentSocket; CoreCount++) {
+      MaxPstateNumberInCurrentCore = PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateMaxValue + 1;
+
+      ScopeSize += (SCOPE_STRUCT_SIZE - 1); // Scope size per core
+      ScopeSize += CstateAcpiObjSize;       // C-State ACPI objects size per core
+
+      // Add P-State ACPI Objects size per core
+      if ((PStateLevelingBufferStructPtr[0].CreateAcpiTables != 0) && (PlatformConfig->UserOptionPState)) {
+        ScopeSize += (PCT_STRUCT_SIZE +
+                     PSS_HEADER_STRUCT_SIZE +
+                     (MaxPstateNumberInCurrentCore * PSS_BODY_STRUCT_SIZE) +
+                     XPSS_HEADER_STRUCT_SIZE +
+                     (MaxPstateNumberInCurrentCore * XPSS_BODY_STRUCT_SIZE) +
+                     PSD_HEADER_STRUCT_SIZE +
+                     PSD_BODY_STRUCT_SIZE +
+                     PPC_HEADER_BODY_STRUCT_SIZE);
+      }
+    }
+    ScopeSize += MaxCoreNumberInCurrentSocket;
+    PStateLevelingBufferStructPtr = (PSTATE_LEVELING *) ((UINT8 *) PStateLevelingBufferStructPtr + (UINTN) sizeof (PSTATE_LEVELING) + (UINTN) (PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+  }
+  AmdPstatePtr->SizeOfBytes = ScopeSize;
+
+  return ScopeSize;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ *  GenerateSsdtStub
+ *
+ *  Description:
+ *     This is the default routine for use when both PState and CState option is NOT
+ *     requested. The option install process will create and fill the transfer vector
+ *     with the address of the proper routine (Main or Stub). The link optimizer will
+ *     strip out of the .DLL the routine that is not used.
+ *
+ *  Parameters:
+ *    @param[in]       StdHeader          Handle to config for library and services
+ *    @param[in]       PlatformConfig     Contains the power cap parameter
+ *    @param[in,out]   SsdtPtr            ACPI SSDT table pointer
+ *
+ *    @retval          AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+GenerateSsdtStub (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **SsdtPtr
+  )
+{
+  return  AGESA_UNSUPPORTED;
+}
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ *  GenerateSsdt
+ *
+ *  Description:
+ *    This function will populate the SSDT with ACPI P-States and C-States Objects, whenever
+ *    necessary
+ *    This function should be called only from BSP
+ *
+ *  Parameters:
+ *    @param[in]       StdHeader          Handle to config for library and services
+ *    @param[in]       PlatformConfig     Contains the power cap parameter
+ *    @param[in,out]   SsdtPtr            ACPI SSDT pointer
+ *
+ *    @retval          AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GenerateSsdt (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **SsdtPtr
+  )
+{
+  UINT32                 i;
+  UINT32                 j;
+  UINT32                 TempVar8_a;
+  UINT32                 CurrSize;
+  UINT32                 TempVar_a;
+  UINT32                 TempVar_b;
+  UINT32                 ScopeSize;
+  UINT32                 CoreCount;
+  UINT32                 SocketCount;
+  UINT32                 MaxCorePerNode;
+  UINT8                  LocalApicId;
+  UINT8                  *IntermediatePtr;
+  AGESA_STATUS           AgesaStatus;
+  LOCATE_HEAP_PTR        LocateHeapParams;
+  ALLOCATE_HEAP_PARAMS   AllocateHeapParams;
+  S_CPU_AMD_PSTATE       *AmdPstatePtr;
+  PSTATE_LEVELING        *PStateLevelingBufferStructPtr;
+  SCOPE                  *ScopeAcpiTablesStructPtr;
+  SCOPE                  *ScopeAcpiTablesStructPtrTemp;
+
+  AGESA_TESTPOINT (TpProcCpuEntryPstate, StdHeader);
+
+  ASSERT (IsBsp (StdHeader, &AgesaStatus));
+
+  // If P-State and C-State ACPI tables do not need to be generated, exit this routine
+  if ((!PlatformConfig->UserOptionPState) && (!IsFeatureEnabled (IoCstate, PlatformConfig, StdHeader))) {
+    AgesaStatus = AGESA_UNSUPPORTED;
+    return AgesaStatus;
+  }
+
+  // Initialize data variables
+  ScopeSize   = 0;
+  CoreCount   = 0;
+  LocalApicId = 0;
+  CurrSize    = 0;
+
+  // Locate P-State data buffer
+  LocateHeapParams.BufferHandle = AMD_PSTATE_DATA_BUFFER_HANDLE;
+  AGESA_TESTPOINT (TpProcCpuBeforeLocateSsdtBuffer, StdHeader);
+  if (HeapLocateBuffer (&LocateHeapParams, StdHeader) != AGESA_SUCCESS) {
+    return AGESA_ERROR;
+  }
+  AGESA_TESTPOINT (TpProcCpuAfterLocateSsdtBuffer, StdHeader);
+
+  AmdPstatePtr = (S_CPU_AMD_PSTATE *) LocateHeapParams.BufferPtr;
+  PStateLevelingBufferStructPtr = AmdPstatePtr->PStateLevelingStruc;
+
+  // Allocate rough buffer for AcpiTable, if SsdtPtr is NULL
+  if (*SsdtPtr == NULL) {
+    //Do not know the actual size.. pre-calculate it.
+    AllocateHeapParams.RequestedBufferSize = CalAcpiTablesSize (AmdPstatePtr, PlatformConfig, StdHeader);
+    AllocateHeapParams.BufferHandle = AMD_PSTATE_ACPI_BUFFER_HANDLE;
+    AllocateHeapParams.Persist = HEAP_SYSTEM_MEM;
+
+    AGESA_TESTPOINT (TpProcCpuBeforeAllocateSsdtBuffer, StdHeader);
+    if (HeapAllocateBuffer (&AllocateHeapParams, StdHeader) != AGESA_SUCCESS) {
+      return AGESA_ERROR;
+    }
+    AGESA_TESTPOINT (TpProcCpuAfterAllocateSsdtBuffer, StdHeader);
+    *SsdtPtr = AllocateHeapParams.BufferPtr;
+  }
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "  SSDT is created\n");
+
+  // Copy SSDT header into allocated buffer
+  LibAmdMemCopy (*SsdtPtr, (VOID *) &CpuSsdtHdrStruct, (UINTN) (sizeof (ACPI_TABLE_HEADER)), StdHeader);
+  IntermediatePtr = (UINT8 *) *SsdtPtr;
+  ScopeAcpiTablesStructPtr = (SCOPE *) &IntermediatePtr[sizeof (ACPI_TABLE_HEADER)];
+
+  SocketCount = AmdPstatePtr->TotalSocketInSystem;
+
+  // Generate name scope and ACPI objects for every core in the system
+  for (i = 0; i < SocketCount; i++) {
+    MaxCorePerNode = PStateLevelingBufferStructPtr->TotalCoresInNode;
+    for (j = 0; j < MaxCorePerNode; j++) {
+      CoreCount++;
+      // Set Name Scope for CPU0, 1, 2, ..... n
+      // CPU0 to CPUn will name  as  C000 to Cnnn
+      // -----------------------------------------
+      ScopeAcpiTablesStructPtr->ScopeOpcode      = SCOPE_OPCODE;
+      // This value will be filled at the end of this function
+      // Since at this time, we don't know how many  Pstates we
+      // would have
+      ScopeAcpiTablesStructPtr->ScopeLength      = 0;
+      ScopeAcpiTablesStructPtr->ScopeValue1      = SCOPE_VALUE1;
+      ScopeAcpiTablesStructPtr->ScopeValue2      = SCOPE_VALUE2;
+      ScopeAcpiTablesStructPtr->ScopeNamePt1a__  = SCOPE_NAME__;
+      if (PlatformConfig->ProcessorScopeInSb) {
+        ScopeAcpiTablesStructPtr->ScopeNamePt1a_P  = SCOPE_NAME_S;
+        ScopeAcpiTablesStructPtr->ScopeNamePt1a_R  = SCOPE_NAME_B;
+      } else {
+        ScopeAcpiTablesStructPtr->ScopeNamePt1a_P  = SCOPE_NAME_P;
+        ScopeAcpiTablesStructPtr->ScopeNamePt1a_R  = SCOPE_NAME_R;
+      }
+      ScopeAcpiTablesStructPtr->ScopeNamePt1b__  = SCOPE_NAME__;
+      ASSERT ((PlatformConfig->ProcessorScopeName0 >= 'A') && (PlatformConfig->ProcessorScopeName0 <= 'Z'))
+      ASSERT (((PlatformConfig->ProcessorScopeName1 >= 'A') && (PlatformConfig->ProcessorScopeName1 <= 'Z')) || \
+              ((PlatformConfig->ProcessorScopeName1 >= '0') && (PlatformConfig->ProcessorScopeName1 <= '9')) || \
+              (PlatformConfig->ProcessorScopeName1 == '_'))
+
+      ScopeAcpiTablesStructPtr->ScopeNamePt2a_C  = PlatformConfig->ProcessorScopeName0;
+      ScopeAcpiTablesStructPtr->ScopeNamePt2a_P  = PlatformConfig->ProcessorScopeName1;
+
+      TempVar8_a = ((CoreCount - 1) >> 4) & 0x0F;
+      ScopeAcpiTablesStructPtr->ScopeNamePt2a_U  = (UINT8) (SCOPE_NAME_0 + TempVar8_a);
+
+      TempVar8_a = (CoreCount - 1) & 0x0F;
+      if (TempVar8_a < 0xA) {
+        ScopeAcpiTablesStructPtr->ScopeNamePt2a_0  = (UINT8) (SCOPE_NAME_0 + TempVar8_a);
+      } else {
+        ScopeAcpiTablesStructPtr->ScopeNamePt2a_0  = (UINT8) (SCOPE_NAME_A + TempVar8_a - 0xA);
+      }
+      // Increment and typecast the pointer
+      ScopeAcpiTablesStructPtrTemp = ScopeAcpiTablesStructPtr;
+      ScopeAcpiTablesStructPtrTemp++;
+
+      // Get the Local Apic Id for each core
+      LocalApicId = PStateLevelingBufferStructPtr->PStateCoreStruct[0].LocalApicId + (UINT8) j;
+
+      // Create P-State ACPI Objects
+      CurrSize += ((*(OptionPstateLateConfiguration.PstateFeature)) (PlatformConfig, PStateLevelingBufferStructPtr, (VOID *) &ScopeAcpiTablesStructPtrTemp, LocalApicId, StdHeader));
+
+      // Create C-State ACPI Objects
+      CurrSize += ((*(OptionPstateLateConfiguration.CstateFeature)) (PlatformConfig, PStateLevelingBufferStructPtr, (VOID *) &ScopeAcpiTablesStructPtrTemp, LocalApicId, StdHeader));
+
+      // Now update the SCOPE Length field
+      {
+        CurrSize += (SCOPE_STRUCT_SIZE - 1);
+        ScopeSize += CurrSize;
+
+        TempVar_b = ((CurrSize << 4) & 0x0000FF00);
+        TempVar_b |= ((CurrSize & 0x0000000F) | 0x00000040);
+        TempVar_a = TempVar_b;
+        ScopeAcpiTablesStructPtr->ScopeLength = (UINT16) TempVar_a;
+        CurrSize = 0;
+      }
+
+      ScopeAcpiTablesStructPtr = ScopeAcpiTablesStructPtrTemp;
+    }
+    //Calculate next node buffer address
+    PStateLevelingBufferStructPtr = (PSTATE_LEVELING *) ((UINT8 *) PStateLevelingBufferStructPtr + (UINTN) sizeof (PSTATE_LEVELING) + (UINTN) (PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+  }
+  //Update SSDT header Checksum
+  ((ACPI_TABLE_HEADER *) *SsdtPtr)->TableLength = (ScopeSize + CoreCount + sizeof (ACPI_TABLE_HEADER));
+  ChecksumAcpiTable ((ACPI_TABLE_HEADER *) *SsdtPtr, StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ *  CreateAcpiTablesStub
+ *
+ *  Description:
+ *     This is the default routine for use when the P-State or C-State option is NOT
+ *     requested. The option install process will create and fill the transfer vector
+ *     with the address of the proper routine (Main or Stub). The link optimizer will
+ *     strip out of the .DLL the routine that is not used.
+ *
+ *  Parameters:
+ *    @param[in]     PlatformConfig       Platform operational characteristics; power cap
+ *    @param[in]     PStateLevelingBuffer Buffer that contains P-State Leveling information
+ *    @param[in,out] SsdtPtr              ACPI SSDT table pointer
+ *    @param[in]     LocalApicId          Local Apic Id
+ *    @param[in]     StdHeader            Handle to config for library and services
+ *
+ *    @retval        Size of generated ACPI objects
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+UINT32
+CreateAcpiTablesStub (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PSTATE_LEVELING        *PStateLevelingBuffer,
+  IN OUT   VOID                   **SsdtPtr,
+  IN       UINT8                  LocalApicId,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  return  0;
+}
+
+
+/**--------------------------------------------------------------------------------------
+ *
+ *  CreatePStateAcpiTables
+ *
+ *  Description:
+ *     This is the common routine for creating ACPI P-State objects
+ *
+ *  Parameters:
+ *    @param[in]     PlatformConfig       Platform operational characteristics; power cap
+ *    @param[in]     PStateLevelingBuffer Buffer that contains P-State Leveling information
+ *    @param[in,out] SsdtPtr              ACPI SSDT table pointer
+ *    @param[in]     LocalApicId          Local Apic Id
+ *    @param[in]     StdHeader            Handle to config for library and services
+ *
+ *    @retval          Size of generated ACPI P-States objects
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+UINT32
+CreatePStateAcpiTables (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PSTATE_LEVELING        *PStateLevelingBuffer,
+  IN OUT   VOID                   **SsdtPtr,
+  IN       UINT8                  LocalApicId,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT8                      PstateCapLevelSupport;
+  UINT8                      PStateMaxValueOnCurrentCore;
+  BOOLEAN                    PstateCapEnable;
+  BOOLEAN                    PstateCapLevelSupportDetermined;
+  BOOLEAN                    IsPsdDependent;
+  UINT32                     k;
+  UINT32                     TempVar_a;
+  UINT32                     TempVar_b;
+  UINT32                     TempVar_c;
+  UINT32                     PstateCapInputMilliWatts;
+  UINT32                     CurrSize;
+  UINT32                     PstateCount;
+  UINT32                     CoreCount1;
+  UINT32                     TransAndBusMastLatency;
+  AGESA_STATUS               IgnoredStatus;
+  PCI_ADDR                   PciAddress;
+  PCT_HEADER_BODY            *pPctAcpiTables;
+  PSS_HEADER                 *pPssHeaderAcpiTables;
+  PSS_BODY                   *pPssBodyAcpiTables;
+  XPSS_HEADER                *pXpssHeaderAcpiTables;
+  XPSS_BODY                  *pXpssBodyAcpiTables;
+  PSD_HEADER                 *pPsdHeaderAcpiTables;
+  PSD_BODY                   *pPsdBodyAcpiTables;
+  PPC_HEADER_BODY            *pPpcAcpiTables;
+  PSTATE_CPU_FAMILY_SERVICES *FamilyServices;
+
+  CurrSize = 0;
+  PstateCount = 0;
+  PstateCapEnable = FALSE;
+  PstateCapLevelSupport = DEFAULT_PERF_PRESENT_CAP;
+  PstateCapLevelSupportDetermined = TRUE;
+  PstateCapInputMilliWatts = PlatformConfig->PowerCeiling;
+  IsPsdDependent = !(PlatformConfig->ForcePstateIndependent);
+  TransAndBusMastLatency = 0;
+
+  if ((PStateLevelingBuffer[0].CreateAcpiTables != 0) && (PlatformConfig->UserOptionPState)) {
+    pPctAcpiTables = (PCT_HEADER_BODY *) *SsdtPtr;
+
+    //Check Pstate Capability
+    if (PstateCapInputMilliWatts != 0) {
+      PstateCapEnable = TRUE;
+      PstateCapLevelSupportDetermined = FALSE;
+    }
+
+    PStateMaxValueOnCurrentCore = PStateLevelingBuffer->PStateCoreStruct[0].PStateMaxValue;
+    if (OptionPstateLateConfiguration.CfgPstatePct) {
+      // Set _PCT Table
+      // --------------
+      pPctAcpiTables->NameOpcode              = NAME_OPCODE;
+      pPctAcpiTables->PctName_a__             = PCT_NAME__;
+      pPctAcpiTables->PctName_a_P             = PCT_NAME_P;
+      pPctAcpiTables->PctName_a_C             = PCT_NAME_C;
+      pPctAcpiTables->PctName_a_T             = PCT_NAME_T;
+      pPctAcpiTables->Value1                  = PCT_VALUE1;
+      pPctAcpiTables->Value2                  = PCT_VALUE2;
+      pPctAcpiTables->Value3                  = PCT_VALUE3;
+      pPctAcpiTables->GenericRegDescription1  = GENERIC_REG_DESCRIPTION;
+      pPctAcpiTables->Length1                 = PCT_LENGTH;
+      pPctAcpiTables->AddressSpaceId1         = PCT_ADDRESS_SPACE_ID;
+      pPctAcpiTables->RegisterBitWidth1       = PCT_REGISTER_BIT_WIDTH;
+      pPctAcpiTables->RegisterBitOffset1      = PCT_REGISTER_BIT_OFFSET;
+      pPctAcpiTables->Reserved1               = PCT_RESERVED;
+      pPctAcpiTables->ControlRegAddressLo     = PCT_CONTROL_REG_LO;
+      pPctAcpiTables->ControlRegAddressHi     = PCT_CONTROL_REG_HI;
+      pPctAcpiTables->Value4                  = PCT_VALUE4;
+      pPctAcpiTables->Value5                  = PCT_VALUE5;
+      pPctAcpiTables->GenericRegDescription2  = GENERIC_REG_DESCRIPTION;
+      pPctAcpiTables->Length2                 = PCT_LENGTH;
+      pPctAcpiTables->AddressSpaceId2         = PCT_ADDRESS_SPACE_ID;
+      pPctAcpiTables->RegisterBitWidth2       = PCT_REGISTER_BIT_WIDTH;
+      pPctAcpiTables->RegisterBitOffset2      = PCT_REGISTER_BIT_OFFSET;
+      pPctAcpiTables->Reserved2               = PCT_RESERVED;
+      pPctAcpiTables->StatusRegAddressLo      = PCT_STATUS_REG_LO;
+      pPctAcpiTables->StatusRegAddressHi      = PCT_STATUS_REG_HI;
+      pPctAcpiTables->Value6                  = PCT_VALUE6;
+
+      // Increment and then typecast the pointer
+      pPctAcpiTables++;
+      CurrSize += PCT_STRUCT_SIZE;
+
+      *SsdtPtr = pPctAcpiTables;
+    } // end of OptionPstateLateConfiguration.CfgPstatePct
+
+    pPssHeaderAcpiTables = (PSS_HEADER *) pPctAcpiTables;
+    pPssBodyAcpiTables   = (PSS_BODY *)   pPctAcpiTables;
+    if (OptionPstateLateConfiguration.CfgPstatePss) {
+      // Set _PSS Header
+      // Note: Set pssLength and numOfItemsInPss later
+      //---------------------------------------------------
+      pPssHeaderAcpiTables->NameOpcode      = NAME_OPCODE;
+      pPssHeaderAcpiTables->PssName_a__     = PSS_NAME__;
+      pPssHeaderAcpiTables->PssName_a_P     = PSS_NAME_P;
+      pPssHeaderAcpiTables->PssName_a_S     = PSS_NAME_S;
+      pPssHeaderAcpiTables->PssName_b_S     = PSS_NAME_S;
+      pPssHeaderAcpiTables->PkgOpcode       = PACKAGE_OPCODE;
+
+      pPssHeaderAcpiTables++;
+      pPssBodyAcpiTables = (PSS_BODY *) pPssHeaderAcpiTables;
+      // Restore the pPssHeaderAcpiTables
+      pPssHeaderAcpiTables--;
+
+      // Set _PSS Body
+      //---------------
+      PstateCount = 0;
+
+      // Calculate PCI address for socket only
+      GetPciAddress (StdHeader, (UINT32) PStateLevelingBuffer->SocketNumber, 0, &PciAddress, &IgnoredStatus);
+      TransAndBusMastLatency = 0;
+      GetFeatureServicesOfSocket (&PstateFamilyServiceTable, (UINT32) PStateLevelingBuffer->SocketNumber, (CONST VOID **)&FamilyServices, StdHeader);
+      ASSERT (FamilyServices != NULL)
+      FamilyServices->GetPstateLatency (  FamilyServices,
+                                          PStateLevelingBuffer,
+                                          &PciAddress,
+                                          &TransAndBusMastLatency,
+                                          StdHeader);
+
+      for (k = 0; k <= PStateMaxValueOnCurrentCore; k++) {
+        if (PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].PStateEnable != 0) {
+          pPssBodyAcpiTables->PkgOpcode           = PACKAGE_OPCODE;
+          pPssBodyAcpiTables->PkgLength           = PSS_PKG_LENGTH;
+          pPssBodyAcpiTables->NumOfElements       = PSS_NUM_OF_ELEMENTS;
+          pPssBodyAcpiTables->DwordPrefixOpcode1  = DWORD_PREFIX_OPCODE;
+          pPssBodyAcpiTables->Frequency           =
+          PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].CoreFreq;
+          pPssBodyAcpiTables->DwordPrefixOpcode2  = DWORD_PREFIX_OPCODE;
+          pPssBodyAcpiTables->Power               =
+          PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].Power;
+
+          if (PstateCapEnable && (!PstateCapLevelSupportDetermined) && (PstateCapInputMilliWatts >= pPssBodyAcpiTables->Power)) {
+            PstateCapLevelSupport = (UINT8) PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber;
+            PstateCapLevelSupportDetermined = TRUE;
+          }
+
+          pPssBodyAcpiTables->DwordPrefixOpcode3  = DWORD_PREFIX_OPCODE;
+          pPssBodyAcpiTables->TransitionLatency   = TransAndBusMastLatency;
+          pPssBodyAcpiTables->DwordPrefixOpcode4  = DWORD_PREFIX_OPCODE;
+          pPssBodyAcpiTables->BusMasterLatency    = TransAndBusMastLatency;
+          pPssBodyAcpiTables->DwordPrefixOpcode5  = DWORD_PREFIX_OPCODE;
+          pPssBodyAcpiTables->Control             =
+          PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber;
+          pPssBodyAcpiTables->DwordPrefixOpcode6  = DWORD_PREFIX_OPCODE;
+          pPssBodyAcpiTables->Status              =
+          PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber;
+
+          pPssBodyAcpiTables++;
+          PstateCount++;
+        }
+      } // for (k = 0; k < MPPSTATE_MAXIMUM_STATES; k++)
+
+      if (PstateCapEnable && (!PstateCapLevelSupportDetermined)) {
+        PstateCapLevelSupport = PStateMaxValueOnCurrentCore;
+      }
+
+      // Set _PSS Header again
+      // Now Set pssLength and numOfItemsInPss
+      //---------------------------------------
+      TempVar_a = (PstateCount * PSS_BODY_STRUCT_SIZE) + 3;
+      TempVar_b = TempVar_a;
+      TempVar_c = ((TempVar_b << 4) & 0x0000FF00);
+      TempVar_c = TempVar_c | ((TempVar_b & 0x0000000F) | 0x00000040);
+      TempVar_a = (UINT16) TempVar_c;
+
+      pPssHeaderAcpiTables->PssLength = (UINT16) TempVar_a;
+      pPssHeaderAcpiTables->NumOfItemsInPss = (UINT8) PstateCount;
+      CurrSize += (PSS_HEADER_STRUCT_SIZE + (PstateCount * PSS_BODY_STRUCT_SIZE));
+
+      *SsdtPtr = pPssBodyAcpiTables;
+    } // end of PSS Body if OptionPstateLateConfiguration.CfgPstatePss
+
+    // Set XPSS Table
+    //---------------
+    // Typecast the pointer
+    pXpssHeaderAcpiTables = (XPSS_HEADER *) pPssBodyAcpiTables;
+    pXpssBodyAcpiTables   = (XPSS_BODY *)   pPssBodyAcpiTables;
+    if (OptionPstateLateConfiguration.CfgPstateXpss) {
+      // Set XPSS Header
+      // Note: Set the pssLength and numOfItemsInPss later
+      //---------------------------------------------------
+      pXpssHeaderAcpiTables->NameOpcode       = NAME_OPCODE;
+      pXpssHeaderAcpiTables->XpssName_a_X     = PSS_NAME_X;
+      pXpssHeaderAcpiTables->XpssName_a_P     = PSS_NAME_P;
+      pXpssHeaderAcpiTables->XpssName_a_S     = PSS_NAME_S;
+      pXpssHeaderAcpiTables->XpssName_b_S     = PSS_NAME_S;
+      pXpssHeaderAcpiTables->PkgOpcode        = PACKAGE_OPCODE;
+
+      // Increment and then typecast the pointer
+      pXpssHeaderAcpiTables++;
+      pXpssBodyAcpiTables = (XPSS_BODY *) pXpssHeaderAcpiTables;
+      // Restore the pXpssHeaderAcpiTables
+      pXpssHeaderAcpiTables--;
+
+      // Set XPSS Body
+      //---------------
+      for (k = 0; k <= PStateMaxValueOnCurrentCore; k++) {
+        if (PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].PStateEnable != 0) {
+          pXpssBodyAcpiTables->PkgOpcode          = PACKAGE_OPCODE;
+          pXpssBodyAcpiTables->PkgLength          = XPSS_PKG_LENGTH;
+          pXpssBodyAcpiTables->NumOfElements      = XPSS_NUM_OF_ELEMENTS;
+          pXpssBodyAcpiTables->XpssValueTbd       = 04;
+          pXpssBodyAcpiTables->DwordPrefixOpcode1 = DWORD_PREFIX_OPCODE;
+          pXpssBodyAcpiTables->Frequency          =
+          PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].CoreFreq;
+          pXpssBodyAcpiTables->DwordPrefixOpcode2 = DWORD_PREFIX_OPCODE;
+          pXpssBodyAcpiTables->Power              =
+          PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].Power;
+          pXpssBodyAcpiTables->DwordPrefixOpcode3 = DWORD_PREFIX_OPCODE;
+          pXpssBodyAcpiTables->TransitionLatency  = TransAndBusMastLatency;
+          pXpssBodyAcpiTables->DwordPrefixOpcode4 = DWORD_PREFIX_OPCODE;
+          pXpssBodyAcpiTables->BusMasterLatency   = TransAndBusMastLatency;
+          pXpssBodyAcpiTables->ControlBuffer      = XPSS_ACPI_BUFFER;
+          pXpssBodyAcpiTables->ControlLo          =
+          PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber;
+          pXpssBodyAcpiTables->ControlHi          = 0;
+          pXpssBodyAcpiTables->StatusBuffer       = XPSS_ACPI_BUFFER;
+          pXpssBodyAcpiTables->StatusLo           =
+          PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber;
+          pXpssBodyAcpiTables->StatusHi           = 0;
+          pXpssBodyAcpiTables->ControlMaskBuffer  = XPSS_ACPI_BUFFER;
+          pXpssBodyAcpiTables->ControlMaskLo      = 0;
+          pXpssBodyAcpiTables->ControlMaskHi      = 0;
+          pXpssBodyAcpiTables->StatusMaskBuffer   = XPSS_ACPI_BUFFER;
+          pXpssBodyAcpiTables->StatusMaskLo       = 0;
+          pXpssBodyAcpiTables->StatusMaskHi       = 0;
+
+          pXpssBodyAcpiTables++;
+        }
+      } // for (k = 0; k < MPPSTATE_MAXIMUM_STATES; k++)
+
+      // Set XPSS Header again
+      // Now set pssLength and numOfItemsInPss
+      //---------------------------------------
+      TempVar_a = (PstateCount * XPSS_BODY_STRUCT_SIZE) + 3;
+      TempVar_b = TempVar_a;
+      TempVar_c = ((TempVar_b << 4) & 0x0000FF00);
+      TempVar_c = TempVar_c | ((TempVar_b & 0x0000000F) | 0x00000040);
+      TempVar_a = (UINT16) TempVar_c;
+
+      pXpssHeaderAcpiTables->XpssLength = (UINT16) TempVar_a;
+      pXpssHeaderAcpiTables->NumOfItemsInXpss = (UINT8) PstateCount;
+      CurrSize += (XPSS_HEADER_STRUCT_SIZE + (PstateCount * XPSS_BODY_STRUCT_SIZE));
+
+      *SsdtPtr = pXpssBodyAcpiTables;
+    } //end of XPSS Body OptionPstateLateConfiguration.CfgPstateXpss
+
+    // Set _PSD Table
+    //---------------
+    // Typecast the pointer
+    pPsdHeaderAcpiTables = (PSD_HEADER *) pXpssBodyAcpiTables;
+    pPsdBodyAcpiTables = (PSD_BODY *)     pXpssBodyAcpiTables;
+    // Get Total Cores Per Node
+    if (GetActiveCoresInGivenSocket ((UINT32) PStateLevelingBuffer->SocketNumber, &CoreCount1, StdHeader)) {
+      GetFeatureServicesOfSocket (&PstateFamilyServiceTable, (UINT32) PStateLevelingBuffer->SocketNumber, (CONST VOID **)&FamilyServices, StdHeader);
+      ASSERT (FamilyServices != NULL)
+      if ((CoreCount1 != 1) && (OptionPstateLateConfiguration.CfgPstatePsd) &&
+          FamilyServices->IsPstatePsdNeeded (FamilyServices, PlatformConfig, StdHeader)) {
+        // Set _PSD Header
+        //----------------
+        pPsdHeaderAcpiTables->NameOpcode    = NAME_OPCODE;
+        pPsdHeaderAcpiTables->PkgOpcode     = PACKAGE_OPCODE;
+        pPsdHeaderAcpiTables->PsdLength     = PSD_HEADER_LENGTH;
+        pPsdHeaderAcpiTables->Value1        = PSD_VALUE1;
+        pPsdHeaderAcpiTables->PsdName_a__   = PSD_NAME__;
+        pPsdHeaderAcpiTables->PsdName_a_P   = PSD_NAME_P;
+        pPsdHeaderAcpiTables->PsdName_a_S   = PSD_NAME_S;
+        pPsdHeaderAcpiTables->PsdName_a_D   = PSD_NAME_D;
+
+        // Typecast the pointer
+        pPsdHeaderAcpiTables++;
+        CurrSize += PSD_HEADER_STRUCT_SIZE;
+        pPsdBodyAcpiTables = (PSD_BODY *) pPsdHeaderAcpiTables;
+
+        pPsdHeaderAcpiTables--;
+        // Set _PSD Body
+        //--------------
+        pPsdBodyAcpiTables->PkgOpcode           = PACKAGE_OPCODE;
+        pPsdBodyAcpiTables->PkgLength           = PSD_PKG_LENGTH;
+        pPsdBodyAcpiTables->NumOfEntries        = NUM_OF_ENTRIES;
+        pPsdBodyAcpiTables->BytePrefixOpcode1   = BYTE_PREFIX_OPCODE;
+        pPsdBodyAcpiTables->PsdNumOfEntries     = PSD_NUM_OF_ENTRIES;
+        pPsdBodyAcpiTables->BytePrefixOpcode2   = BYTE_PREFIX_OPCODE;
+        pPsdBodyAcpiTables->PsdRevision         = PSD_REVISION;
+        pPsdBodyAcpiTables->DwordPrefixOpcode1  = DWORD_PREFIX_OPCODE;
+
+        IsPsdDependent = FamilyServices->IsPstatePsdDependent (FamilyServices, PlatformConfig, StdHeader);
+
+        if (IsPsdDependent) {
+          pPsdBodyAcpiTables->DependencyDomain    = PSD_DEPENDENCY_DOMAIN;
+          pPsdBodyAcpiTables->CoordinationType    = PSD_COORDINATION_TYPE_SW_ALL;
+          pPsdBodyAcpiTables->NumOfProcessors     = CoreCount1;
+        } else {
+          switch (GetComputeUnitMapping (StdHeader)) {
+          case AllCoresMapping:
+            // All cores are in their own compute unit.
+            pPsdBodyAcpiTables->DependencyDomain    = LocalApicId;
+            pPsdBodyAcpiTables->CoordinationType    = PSD_COORDINATION_TYPE_SW_ANY;
+            pPsdBodyAcpiTables->NumOfProcessors     = PSD_NUM_OF_PROCESSORS;
+            break;
+          case EvenCoresMapping:
+            // Cores are paired in compute units.
+            pPsdBodyAcpiTables->DependencyDomain    = (LocalApicId >> 1) & PSD_DOMAIN_COMPUTE_UNIT_MASK;
+            pPsdBodyAcpiTables->CoordinationType    = PSD_COORDINATION_TYPE_HW_ALL;
+            pPsdBodyAcpiTables->NumOfProcessors     = PSD_CORE_NUM_PER_COMPUTE_UNIT;
+            break;
+          default:
+            ASSERT (FALSE);
+          }
+        }
+        pPsdBodyAcpiTables->DwordPrefixOpcode2  = DWORD_PREFIX_OPCODE;
+        pPsdBodyAcpiTables->DwordPrefixOpcode3  = DWORD_PREFIX_OPCODE;
+
+        pPsdBodyAcpiTables++;
+        *SsdtPtr = pPsdBodyAcpiTables;
+        CurrSize += PSD_BODY_STRUCT_SIZE;
+      }
+    }// end of PSD Body if (CoreCount1 != 1) || (OptionPstateLateConfiguration.CfgPstatePsd)
+    // Typecast the pointer
+
+    pPpcAcpiTables = (PPC_HEADER_BODY *) pPsdBodyAcpiTables;
+
+    // Set _PPC Table
+    //---------------
+    if (OptionPstateLateConfiguration.CfgPstatePpc) {
+      // Name (PPCV, value)
+      pPpcAcpiTables->NameOpcode            = NAME_OPCODE;
+      pPpcAcpiTables->PpcName_a_P           = PPC_NAME_P;
+      pPpcAcpiTables->PpcName_b_P           = PPC_NAME_P;
+      pPpcAcpiTables->PpcName_a_C           = PPC_NAME_C;
+      pPpcAcpiTables->PpcName_a_V           = PPC_NAME_V;
+      pPpcAcpiTables->Value1                = PPC_VALUE1;
+      pPpcAcpiTables->DefaultPerfPresentCap = PstateCapLevelSupport;
+      // Method (_PPC) { return (PPCV) }
+      pPpcAcpiTables->MethodOpcode          = METHOD_OPCODE;
+      pPpcAcpiTables->PpcLength             = PPC_METHOD_LENGTH;
+      pPpcAcpiTables->PpcName_a__           = PPC_NAME__;
+      pPpcAcpiTables->PpcName_c_P           = PPC_NAME_P;
+      pPpcAcpiTables->PpcName_d_P           = PPC_NAME_P;
+      pPpcAcpiTables->PpcName_b_C           = PPC_NAME_C;
+      pPpcAcpiTables->MethodFlags           = PPC_METHOD_FLAGS;
+      pPpcAcpiTables->ReturnOpcode          = RETURN_OPCODE;
+      pPpcAcpiTables->PpcName_e_P           = PPC_NAME_P;
+      pPpcAcpiTables->PpcName_f_P           = PPC_NAME_P;
+      pPpcAcpiTables->PpcName_c_C           = PPC_NAME_C;
+      pPpcAcpiTables->PpcName_b_V           = PPC_NAME_V;
+
+      CurrSize += PPC_HEADER_BODY_STRUCT_SIZE;
+      // Increment and typecast the pointer
+      pPpcAcpiTables++;
+      *SsdtPtr =  pPpcAcpiTables;
+    }// end of OptionPstateLateConfiguration.CfgPstatePpc
+  }
+  return CurrSize;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ *  CreateCStateAcpiTables
+ *
+ *  Description:
+ *     This is the common routine for creating ACPI C-State objects
+ *
+ *  Parameters:
+ *    @param[in]     PlatformConfig       Platform operational characteristics; power cap
+ *    @param[in]     PStateLevelingBuffer Buffer that contains P-State Leveling information
+ *    @param[in,out] SsdtPtr              ACPI SSDT table pointer
+ *    @param[in]     LocalApicId          Local Apic Id
+ *    @param[in]     StdHeader            Handle to config for library and services
+ *
+ *    @retval        Size of ACPI C-States objects generated
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+UINT32
+CreateCStateAcpiTables (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PSTATE_LEVELING        *PStateLevelingBuffer,
+  IN OUT   VOID                   **SsdtPtr,
+  IN       UINT8                  LocalApicId,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                    ObjSize;
+  IO_CSTATE_FAMILY_SERVICES *IoCstateFamilyServices;
+
+  ObjSize = 0;
+
+  if (IsFeatureEnabled (IoCstate, PlatformConfig, StdHeader)) {
+    GetFeatureServicesOfCurrentCore (&IoCstateFamilyServiceTable, (CONST VOID **)&IoCstateFamilyServices, StdHeader);
+    // If we're supporting multiple families, only proceed when IO Cstate family services are available
+    if (IoCstateFamilyServices != NULL) {
+      IoCstateFamilyServices->CreateAcpiCstObj (IoCstateFamilyServices, LocalApicId, SsdtPtr, StdHeader);
+      ObjSize = IoCstateFamilyServices->GetAcpiCstObj (IoCstateFamilyServices, PlatformConfig, StdHeader);
+    }
+  }
+  return ObjSize;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateTables.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateTables.h
new file mode 100644
index 0000000000..356d9126fc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuPstateTables.h
@@ -0,0 +1,331 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Pstate Table Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU _PSS related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 44702 $   @e \$Date: 2011-01-04 15:54:00 -0700 (Tue, 04 Jan 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_PSTATE_TABLES_H_
+#define _CPU_PSTATE_TABLES_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+//  Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (PSTATE_CPU_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/// P-state structure for each state
+typedef struct {
+  IN OUT   UINT32               PStateEnable;                ///< Pstate enable
+  IN OUT   UINT32               CoreFreq;                    ///< MHz
+  IN OUT   UINT32               Power;                       ///< milliWatts
+  IN OUT   UINT32               IddValue;                    ///< Current value field
+  IN OUT   UINT32               IddDiv;                      ///< Current divisor field
+  IN OUT   UINT32               SwPstateNumber;              ///< Software P-state number
+} S_PSTATE_VALUES;
+
+/// P-state structure for each core
+typedef struct {
+  IN OUT   UINT8                PStateMaxValue;              ///< Max p-state number in this core
+  IN OUT   UINT8                HtcPstateLimit;              ///< Htc limit
+  IN OUT   UINT8                HtcCapable;                  ///< Htc capable
+  IN OUT   UINT8                LocalApicId;                 ///< Local Apic Id
+  IN OUT   UINT8                NumberOfBoostedStates;       ///< Number of boost P-states
+  IN OUT   S_PSTATE_VALUES      PStateStruct[1];             ///< P state struc
+} S_PSTATE;
+
+/// P-state structure for each node
+typedef struct {
+  IN       UINT8                SetPState0;                  ///< If value = 0x55 (Don't set PState0)
+  IN       UINT8                TotalCoresInNode;            ///< core number per node
+  IN       UINT16               PStateLevelingSizeOfBytes;   ///< Size
+  IN       BOOLEAN              OnlyOneEnabledPState;        ///< Only P0
+  IN       UINT8                InitStruct;                  ///< Init struc
+  IN       BOOLEAN              AllCpusHaveIdenticalPStates; ///< Have Identical p state
+  IN       UINT8                CreateAcpiTables;            ///< Create table flag
+  IN       UINT8                SocketNumber;                ///< Physical socket number of this socket
+  IN       UINT8                Reserved[2];                 ///< Reserved.
+  IN OUT   S_PSTATE             PStateCoreStruct[1];         ///< P state core struc
+} PSTATE_LEVELING;
+
+/// P-state structure for whole system
+typedef struct {
+  IN OUT   UINT32               TotalSocketInSystem;         ///< Total node number in system
+  IN OUT   UINT32               SizeOfBytes;                 ///< Structure size
+  IN OUT   PSTATE_LEVELING      PStateLevelingStruc[1];      ///< P state level structure
+} S_CPU_AMD_PSTATE;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if PSD need to be generated.
+ *
+ * @param[in]     PstateCpuFamilyServices  Pstate CPU services.
+ * @param[in,out] PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]     StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               PSD need to be generated
+ * @retval       FALSE              PSD does NOT need to be generated
+ *
+ */
+typedef BOOLEAN F_PSTATE_PSD_IS_NEEDED (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN OUT   PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_PSTATE_PSD_IS_NEEDED *PF_PSTATE_PSD_IS_NEEDED;
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if Pstate PSD is dependent.
+ *
+ * @param[in]     PstateCpuFamilyServices  Pstate CPU services.
+ * @param[in,out] PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]     StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               PSD is dependent.
+ * @retval       FALSE              PSD is independent.
+ *
+ */
+typedef BOOLEAN F_PSTATE_PSD_IS_DEPENDENT (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN OUT   PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_PSTATE_PSD_IS_DEPENDENT *PF_PSTATE_PSD_IS_DEPENDENT;
+
+/**
+ *  Family specific call to set core TscFreqSel.
+ *
+ * @param[in]     PstateCpuFamilyServices  Pstate CPU services.
+ * @param[in]     StdHeader          Config Handle for library, services.
+ *
+ */
+typedef VOID F_PSTATE_SET_TSC_FREQ_SEL (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_PSTATE_SET_TSC_FREQ_SEL *PF_PSTATE_SET_TSC_FREQ_SEL;
+
+/**
+ *  Family specific call to get CPU pstate transition latency for current socket.
+ *
+ *  @param[in]     PstateCpuFamilyServices        Pstate CPU services.
+ *  @param[in]     PStateLevelingBufferStructPtr  Pstate row data buffer pointer.
+ *  @param[in]     PciAddress                     Pci address struct.
+ *  @param[out]    TransitionLatency              Pstate Transition latency result.
+ *  @param[in]     StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_PSTATE_TRANSITION_LATENCY (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       PSTATE_LEVELING        *PStateLevelingBufferStructPtr,
+  IN       PCI_ADDR               *PciAddress,
+     OUT   UINT32                 *TransitionLatency,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_PSTATE_TRANSITION_LATENCY *PF_CPU_PSTATE_TRANSITION_LATENCY;
+
+/**
+ *  Family specific call to get the desired P-state's frequency in megahertz.
+ *
+ *  @param[in]     PstateCpuFamilyServices Pstate CPU services.
+ *  @param[in]     StateNumber             P-state number.
+ *  @param[out]    PowerInMw               P-state frequency in megahertz.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_PSTATE_FREQ (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *FreqInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_PSTATE_FREQ *PF_CPU_GET_PSTATE_FREQ;
+
+/**
+ *  Family specific call to set the system wide P-state settings on the current core.
+ *
+ *  @param[in]     PstateCpuFamilyServices Pstate CPU services.
+ *  @param[in]     CpuAmdPState            The current core's P-state data.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_SET_PSTATE_LEVELING_REG (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       S_CPU_AMD_PSTATE   *CpuAmdPState,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_SET_PSTATE_LEVELING_REG *PF_CPU_SET_PSTATE_LEVELING_REG;
+
+/**
+ *  Family specific call to get the desired P-state's rated power in milliwatts.
+ *
+ *  @param[in]     PstateCpuFamilyServices Pstate CPU services.
+ *  @param[in]     StateNumber             P-state number.
+ *  @param[out]    PowerInMw               P-state power in milliwatts.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_PSTATE_POWER (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *PowerInMw,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_PSTATE_POWER *PF_CPU_GET_PSTATE_POWER;
+
+/**
+ *  Family specific call to get CPU Pstate Max State.
+ *
+ *  @param[in]     PstateCpuFamilyServices        Pstate CPU services.
+ *  @param[out]    MaxPStateNumber                The max hw pstate value on the current socket.
+ *  @param[out]    NumberOfBoostStates            The number of boosted P-states on the current socket.
+ *  @param[in]     StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_PSTATE_MAX_STATE (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+     OUT   UINT32              *MaxPStateNumber,
+     OUT   UINT8               *NumberOfBoostStates,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_PSTATE_MAX_STATE *PF_CPU_GET_PSTATE_MAX_STATE;
+
+/**
+ *  Family specific call to get CPU pstate register information.
+ *
+ *  @param[in]     PstateCpuFamilyServices        Pstate CPU services.
+ *  @param[in]     PState                         Input hardware Pstate number for query.
+ *  @param[out]    PStateEnabled                  Boolean flag return pstate enable.
+ *  @param[in,out] IddVal                         Pstate current value.
+ *  @param[in,out] IddDiv                         Pstate current divisor.
+ *  @param[out]    SwPstateNumber                 Software P-state number.
+ *  @param[in]     StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_PSTATE_REGISTER_INFO (
+  IN       PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+  IN       UINT32              PState,
+     OUT   BOOLEAN             *PStateEnabled,
+  IN OUT   UINT32              *IddVal,
+  IN OUT   UINT32              *IddDiv,
+     OUT   UINT32              *SwPstateNumber,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_PSTATE_REGISTER_INFO *PF_CPU_GET_PSTATE_REGISTER_INFO;
+
+/**
+ * Provide the interface to the Pstate dependent Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _PSTATE_CPU_FAMILY_SERVICES {
+  UINT16          Revision;                                         ///< Interface version
+  // Public Methods.
+  PF_PSTATE_PSD_IS_NEEDED IsPstatePsdNeeded;                        ///< Method: Family specific call to check if PSD need to be generated.
+  PF_PSTATE_PSD_IS_DEPENDENT IsPstatePsdDependent;                  ///< Method: Family specific call to check if PSD is dependent.
+  PF_PSTATE_SET_TSC_FREQ_SEL CpuSetTscFreqSel;                      ///< Method: Family specific call to set core TscFreqSel.
+  PF_CPU_PSTATE_TRANSITION_LATENCY GetPstateLatency;                ///< Method: Family specific call to get pstate transition latency.
+  PF_CPU_GET_PSTATE_FREQ GetPstateFrequency;                        ///< Method: Family specific call to get the desired P-state's frequency in megahertz.
+  PF_CPU_SET_PSTATE_LEVELING_REG SetPStateLevelReg;                 ///< Method: Family specific call to set the system wide P-state settings on the current core.
+  PF_CPU_GET_PSTATE_POWER GetPstatePower;                           ///< Method: Family specific call to get the desired P-state's rated power in milliwatts.
+  PF_CPU_GET_PSTATE_MAX_STATE GetPstateMaxState;                    ///< Method: Family specific call to get pstate max state number.
+  PF_CPU_GET_PSTATE_REGISTER_INFO GetPstateRegisterInfo;            ///< Method: Family specific call to get pstate register information.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ *                          F U N C T I O N S     P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PStateGatherData (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   S_CPU_AMD_PSTATE       *PStateStrucPtr,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+AGESA_STATUS
+PStateLeveling (
+  IN OUT   S_CPU_AMD_PSTATE  *PStateStrucPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+CpuGetPStateLevelStructure (
+     OUT   PSTATE_LEVELING     **PStateBufferPtr,
+  IN       S_CPU_AMD_PSTATE    *CpuAmdPState,
+  IN       UINT32              LogicalSocketNumber,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+#endif  // _CPU_PSTATE_TABLES_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSlit.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSlit.c
new file mode 100644
index 0000000000..2642a1f8c2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSlit.c
@@ -0,0 +1,397 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD SLIT, ACPI table related API functions.
+ *
+ * Contains code that generates the SLIT table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 54901 $   @e \$Date: 2011-06-13 21:51:47 -0600 (Mon, 13 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------
+ * This file provides functions, that will generate SLIT tables
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                            M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionSlit.h"
+#include "heapManager.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "Ids.h"
+#include "cpuFeatures.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuL3Features.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUSLIT_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern OPTION_SLIT_CONFIGURATION OptionSlitConfiguration;  // global user config record
+
+STATIC ACPI_TABLE_HEADER  ROMDATA CpuSlitHdrStruct =
+{
+  {'S','L','I','T'},
+  0,
+  1,
+  0,
+  {'A','M','D',' ',' ',' '},
+  {'A','G','E','S','A',' ',' ',' '},
+  1,
+  {'A','M','D',' '},
+  1
+};
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+AcpiSlitHBufferFind (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT8 **SocketTopologyPtr
+  );
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     E X P O R T E D     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GetAcpiSlitStub (
+  IN OUT   AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **SlitPtr
+  );
+
+AGESA_STATUS
+GetAcpiSlitMain (
+  IN OUT   AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **SlitPtr
+   );
+
+AGESA_STATUS
+ReleaseSlitBufferStub (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+AGESA_STATUS
+ReleaseSlitBuffer (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern CPU_FAMILY_SUPPORT_TABLE L3FeatureFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function generates a complete SLIT table into a memory buffer.
+ * After completion, this table must be set by the system BIOS into its
+ * internal ACPI namespace, and linked into the RSDT/XSDT
+ *
+ *    @param[in, out]  StdHeader        Standard Head Pointer
+ *    @param[in]       PlatformConfig   Config handle for platform specific information
+ *    @param[in, out]  SlitPtr          Point to Slit Struct including buffer address and length
+ *
+ *    @retval          UINT32  AGESA_STATUS
+ */
+AGESA_STATUS
+CreateAcpiSlit (
+  IN OUT   AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **SlitPtr
+  )
+{
+  AGESA_TESTPOINT (TpProcCpuEntrySlit, StdHeader);
+  return ((*(OptionSlitConfiguration.SlitFeature)) (StdHeader, PlatformConfig, SlitPtr));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default routine for use when the SLIT option is NOT requested.
+ *
+ * The option install process will create and fill the transfer vector with
+ * the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ *    @param[in, out]  StdHeader        Standard Head Pointer
+ *    @param[in]       PlatformConfig   Config handle for platform specific information
+ *    @param[in, out]  SlitPtr          Point to Slit Struct including buffer address and length
+ *
+ *    @retval         AGESA_STATUS
+ */
+
+AGESA_STATUS
+GetAcpiSlitStub (
+  IN OUT   AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **SlitPtr
+  )
+{
+  return  AGESA_UNSUPPORTED;
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function generates a complete SLIT table into a memory buffer.
+ * After completion, this table must be set by the system BIOS into its
+ * internal ACPI namespace, and linked into the RSDT/XSDT
+ *
+ *    @param[in, out]  StdHeader        Standard Head Pointer
+ *    @param[in]       PlatformConfig   Config handle for platform specific information
+ *    @param[in, out]  SlitPtr          Point to Slit Struct including buffer address and length
+ *
+ *    @retval          UINT32  AGESA_STATUS
+ */
+AGESA_STATUS
+GetAcpiSlitMain (
+  IN OUT   AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **SlitPtr
+   )
+{
+  UINT8 MaxHops;
+  UINT8 SocketNum;
+  UINT8 i;
+  UINT8 j;
+  UINT8 *BufferPtr;
+  UINT8 *SocketTopologyDataPtr;
+  UINT8 *SocketTopologyPtr;
+  UINT32 Socket;
+  BOOLEAN IsProbeFilterEnabled;
+  ACPI_TABLE_HEADER *CpuSlitHeaderStructPtr;
+  AGESA_STATUS Flag;
+  ALLOCATE_HEAP_PARAMS AllocStruct;
+  L3_FEATURE_FAMILY_SERVICES *FamilyServices;
+
+  MaxHops = 0;
+  SocketTopologyPtr = NULL;
+  Flag = AGESA_ERROR;
+  IsProbeFilterEnabled = FALSE;
+
+  // find out the pointer to the BufferHandle which contains
+  // Node Topology information
+  AcpiSlitHBufferFind (StdHeader, &SocketTopologyPtr);
+  if (SocketTopologyPtr == 0) {
+    return (Flag);
+  }
+
+  SocketNum = *SocketTopologyPtr;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "  SLIT is created\n");
+
+  // create a buffer by calling IBV callout routine
+  AllocStruct.RequestedBufferSize = (SocketNum * SocketNum) + AMD_ACPI_SLIT_SOCKET_NUM_LENGTH + sizeof (ACPI_TABLE_HEADER);
+  AllocStruct.BufferHandle = AMD_ACPI_SLIT_BUFFER_HANDLE;
+  AllocStruct.Persist = HEAP_SYSTEM_MEM;
+  if (HeapAllocateBuffer (&AllocStruct, StdHeader) != AGESA_SUCCESS) {
+    return (Flag);
+  }
+  *SlitPtr = AllocStruct.BufferPtr;
+
+  //SLIT header
+  LibAmdMemCopy (*SlitPtr, (VOID *) &CpuSlitHdrStruct, (UINTN) (sizeof (ACPI_TABLE_HEADER)), StdHeader);
+  CpuSlitHeaderStructPtr = (ACPI_TABLE_HEADER *) *SlitPtr;
+  CpuSlitHeaderStructPtr->TableLength = (UINT32) AllocStruct.RequestedBufferSize;
+  BufferPtr = *SlitPtr;
+
+  Flag = AGESA_SUCCESS;
+  // SLIT body
+  // Check if Probe Filter is enabled
+  if (IsFeatureEnabled (L3Features, PlatformConfig, StdHeader)) {
+    IsProbeFilterEnabled = TRUE;
+    for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+      if (IsProcessorPresent (Socket, StdHeader)) {
+        GetFeatureServicesOfSocket (&L3FeatureFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+        if ((FamilyServices == NULL) || (!FamilyServices->IsHtAssistSupported (FamilyServices, PlatformConfig, StdHeader))) {
+          IsProbeFilterEnabled = FALSE;
+          break;
+        }
+      }
+    }
+  }
+
+
+  if (!IsProbeFilterEnabled) {
+    // probe filter is disabled
+    // get MaxHops
+    SocketTopologyDataPtr = SocketTopologyPtr + sizeof (SocketNum);
+    for (i = 0; i < SocketNum; i++) {
+      for (j = 0; j < SocketNum; j++) {
+        if (*SocketTopologyDataPtr > MaxHops) {
+          MaxHops = *SocketTopologyDataPtr;
+        }
+        SocketTopologyDataPtr++;
+      }
+    }
+
+    // the Max hop entries have a value of 13
+    // and all other entries have 10.
+    SocketTopologyDataPtr = SocketTopologyPtr + sizeof (SocketNum);
+    for (i = 0; i < SocketNum; i++) {
+      for (j = 0; j < SocketNum; j++) {
+        if (*SocketTopologyDataPtr++ == MaxHops) {
+          *(BufferPtr + sizeof (ACPI_TABLE_HEADER) +
+            AMD_ACPI_SLIT_SOCKET_NUM_LENGTH + (i * SocketNum) + j) = 13;
+        } else {
+          *(BufferPtr + sizeof (ACPI_TABLE_HEADER) +
+            AMD_ACPI_SLIT_SOCKET_NUM_LENGTH + (i * SocketNum) + j) = 10;
+        }
+      }
+    }
+  } else {
+    // probe filter is enabled
+    // formula : num_hops * 6 + 10
+    SocketTopologyDataPtr = SocketTopologyPtr + sizeof (SocketNum);
+    for (i = 0; i < SocketNum; i++) {
+      for (j = 0; j < SocketNum; j++) {
+        *(BufferPtr + sizeof (ACPI_TABLE_HEADER) +
+          AMD_ACPI_SLIT_SOCKET_NUM_LENGTH + (i * SocketNum) + j) =
+          ((*SocketTopologyDataPtr++) * 6) + 10;
+      }
+    }
+  }
+
+  BufferPtr += sizeof (ACPI_TABLE_HEADER);
+  *((UINT64 *) BufferPtr) = (UINT64) SocketNum;
+
+  //Update SLIT header Checksum
+  ChecksumAcpiTable ((ACPI_TABLE_HEADER *) *SlitPtr, StdHeader);
+
+  return (Flag);
+}
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Find out the pointer to the BufferHandle which contains
+ * Node Topology information
+ *
+ *    @param[in, out] StdHeader         Standard Head Pointer
+ *    @param[in] SocketTopologyPtr      Point to the address of Socket Topology
+ *
+ */
+VOID
+STATIC
+AcpiSlitHBufferFind (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT8 **SocketTopologyPtr
+  )
+{
+  LOCATE_HEAP_PTR LocateBuffer;
+
+  LocateBuffer.BufferHandle = HOP_COUNT_TABLE_HANDLE;
+  if (HeapLocateBuffer (&LocateBuffer, StdHeader) == AGESA_SUCCESS) {
+    *SocketTopologyPtr = (UINT8 *) LocateBuffer.BufferPtr;
+  }
+
+  return;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  ReleaseSlitBufferStub
+ *
+ *  Description:
+ *      This is the default routine for use when the SLIT option is NOT requested.
+ *
+ *  Parameters:
+ *    @param[in, out]    *StdHeader
+ *
+ *    @retval         AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+ReleaseSlitBufferStub (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  return  AGESA_UNSUPPORTED;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  ReleaseSlitBuffer
+ *
+ *  Description:
+ *     Deallocate SLIT buffer
+ *
+ *  Parameters:
+ *    @param[in, out]    *StdHeader
+ *
+ *    @retval         AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+ReleaseSlitBuffer (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  HeapDeallocateBuffer ((UINT32) HOP_COUNT_TABLE_HANDLE, StdHeader);
+
+  return  AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSrat.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSrat.c
new file mode 100644
index 0000000000..b4d0e0f1d6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSrat.c
@@ -0,0 +1,617 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD SRAT, ACPI table related API functions.
+ *
+ * Contains code that Create the APCI SRAT Table after early reset.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 54901 $   @e \$Date: 2011-06-13 21:51:47 -0600 (Mon, 13 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+
+/*----------------------------------------------------------------------------
+ * This file provides functions, that will generate SRAT tables
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                            M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuServices.h"
+#include "OptionSrat.h"
+#include "heapManager.h"
+#include "cpuRegisters.h"
+#include "cpuLateInit.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUSRAT_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_SRAT_CONFIGURATION OptionSratConfiguration;  // global user config record
+
+#define NodeID 0x60
+#define FOURGB 0x010000
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GetAcpiSratStub (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   VOID                  **SratPtr
+  );
+
+AGESA_STATUS
+GetAcpiSratMain (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   VOID                  **SratPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *  All of the DATA should be defined in _CODE segment.
+ *  Use ROMDATA to specify that it belongs to _CODE.
+ *----------------------------------------------------------------------------
+ */
+STATIC CPU_SRAT_HEADER  ROMDATA CpuSratHdrStruct =
+{
+  {'S','R','A','T'},
+  0,
+  2,
+  0,
+  {'A','M','D',' ',' ',' '},
+  {'A','G','E','S','A',' ',' ',' '},
+  1,
+  {'A','M','D',' '},
+  1,
+  1,
+  {0, 0, 0, 0, 0, 0, 0, 0}
+};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT8
+STATIC
+*MakeApicEntry (
+  IN UINT8 ApicId,
+  IN UINT8 Domain,
+  IN UINT8 *BufferLocPtr
+  );
+
+UINT8
+STATIC
+*FillMemoryForCurrentNode (
+  IN      UINT8 *PDomain,
+  IN OUT  UINT8 *PDomainForBase640K,
+  IN      UINT8 Node,
+  IN OUT  UINT8 *BufferLocPtr,
+  IN OUT  AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT8
+STATIC
+*MakeMemEntry (
+  IN UINT8  PDomain,
+  IN UINT8  Node,
+  IN UINT32 Base,
+  IN UINT32 Size,
+  IN UINT8  *BufferLocPtr
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function will generate a complete Static Resource Affinity Table
+ * i.e. SRAT into a memory buffer. After completion, this table must be set
+ * by the system BIOS into its internal ACPI name space.
+ *
+ *    @param[in, out] StdHeader         Standard Head Pointer
+ *    @param[in, out] SratPtr           Point to Srat Struct including buffer address and length
+ *
+ *    @retval         AGESA_STATUS
+ */
+
+AGESA_STATUS
+CreateAcpiSrat (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   VOID                  **SratPtr
+  )
+{
+  AGESA_TESTPOINT (TpProcCpuEntrySrat, StdHeader);
+  return ((*(OptionSratConfiguration.SratFeature)) (StdHeader, SratPtr));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default routine for use when the SRAT option is NOT requested.
+ *
+ * The option install process will create and fill the transfer vector with
+ * the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ *    @param[in, out] StdHeader      Standard Head Pointer
+ *    @param[in, out] SratPtr           Point to Srat Struct including buffer address and length
+ *
+ *    @retval         AGESA_STATUS
+ */
+
+AGESA_STATUS
+GetAcpiSratStub (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   VOID                  **SratPtr
+  )
+{
+  return  AGESA_UNSUPPORTED;
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function will generate a complete Static Resource Affinity Table
+ * i.e. SRAT into a memory buffer. After completion, this table must be set
+ * by the system BIOS into its internal ACPI name space.
+ *
+ *    @param[in, out] StdHeader         Standard Head Pointer
+ *    @param[in, out] SratPtr           Point to Srat Struct including buffer address and length
+ *
+ *    @retval         AGESA_STATUS
+ */
+AGESA_STATUS
+GetAcpiSratMain (
+  IN OUT   AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   VOID                  **SratPtr
+  )
+{
+  UINT8     *BufferPtr;
+  UINT8     NodeNum;
+  UINT8     NodeCount;
+  UINT8     PDomain;
+  UINT8     PDomainForBase640K;
+  UINT32    Socket;
+  UINT32    Module;
+  UINT32    LowCore;
+  UINT32    HighCore;
+  UINT32    CoreNum;
+  UINT32    RegVal;
+  UINT32    tempVar_32;
+  AMD_APIC_PARAMS ApicParams;
+  PCI_ADDR  PciAddress;
+  CPU_SRAT_HEADER  *CpuSratHeaderStructPtr;
+  ALLOCATE_HEAP_PARAMS AllocParams;
+
+  // Get Node count
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0, LOW_NODE_DEVICEID, FUNC_0, NodeID);
+  LibAmdPciRead (AccessWidth32 , PciAddress, &RegVal, StdHeader);
+  NodeCount = (UINT8) (((RegVal >> 4) & 0x7) + 1);
+
+  // The worst-case buffer size to request is for the SRAT table header, one
+  // entree for special region (base 640k block), two memory
+  // regions per node, and APIC entries for each core in the system.
+  tempVar_32 = (sizeof (CPU_SRAT_HEADER)) + (sizeof (CPU_SRAT_MEMORY_ENTRY))
+               + ((UINT32) NodeCount * (2 * (sizeof (CPU_SRAT_MEMORY_ENTRY))
+               + ((UINT32) GetActiveCoresInCurrentModule (StdHeader) * sizeof (CPU_SRAT_APIC_ENTRY))));
+
+  if (*SratPtr == NULL) {
+    //
+    // Allocate a buffer
+    //
+    AllocParams.RequestedBufferSize = tempVar_32;
+    AllocParams.BufferHandle = AMD_SRAT_INFO_BUFFER_HANDLE;
+    AllocParams.Persist = HEAP_SYSTEM_MEM;
+
+    AGESA_TESTPOINT (TpProcCpuBeforeAllocateSratBuffer, StdHeader);
+    if (HeapAllocateBuffer (&AllocParams, StdHeader) != AGESA_SUCCESS) {
+      return AGESA_ERROR;
+    }
+    AGESA_TESTPOINT (TpProcCpuAfterAllocateSratBuffer, StdHeader);
+
+    *SratPtr = AllocParams.BufferPtr;
+  }
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "  SRAT is created\n");
+
+  CpuSratHeaderStructPtr = (CPU_SRAT_HEADER *) *SratPtr;
+  BufferPtr = (UINT8 *) *SratPtr;
+
+  // Copy acpiSRATHeader -> data buffer
+  LibAmdMemCopy (*SratPtr, (VOID *) &CpuSratHdrStruct, (UINTN) (sizeof (CPU_SRAT_HEADER)), StdHeader);
+
+  BufferPtr += sizeof (CPU_SRAT_HEADER);
+
+  // Place all memory and IO affinity entries
+  NodeNum = 0;
+  PDomain = 0;
+  PDomainForBase640K = 0xFF;
+  ApicParams.StdHeader = *StdHeader;
+  while (NodeNum < NodeCount) {
+    GetSocketModuleOfNode ((UINT32) NodeNum, &Socket, &Module, StdHeader);
+    GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader);
+    BufferPtr = FillMemoryForCurrentNode (&PDomain, &PDomainForBase640K, NodeNum, BufferPtr, StdHeader);
+    for (CoreNum = LowCore; CoreNum <= HighCore; CoreNum++) {
+      ApicParams.Socket = (UINT8) Socket;
+      ApicParams.Core = (UINT8) CoreNum;
+      AmdGetApicId (&ApicParams);
+      if (ApicParams.IsPresent) {
+        BufferPtr = MakeApicEntry (ApicParams.ApicAddress, PDomain, BufferPtr);
+      }
+    }
+
+    NodeNum++;
+    PDomain = NodeNum;
+  }
+
+  // Store size in table (current buffer offset - buffer start offset)
+  CpuSratHeaderStructPtr->TableLength = (UINT32) (BufferPtr - (UINT8 *) CpuSratHeaderStructPtr);
+
+  //Update SSDT header Checksum
+  ChecksumAcpiTable ((ACPI_TABLE_HEADER *) CpuSratHeaderStructPtr, StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------
+ *                            L O C A L    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function will build Memory entry for current node.
+ * Note that we only create a memory affinity entry if we find one
+ * that matches the current node.  This makes an easier to read table
+ * though it is not necessary.
+ *
+ *    @param[in]      PDomain            Proximity Domain
+ *    @param[in, out] PDomainForBase640K The PDomain for Base 640K
+ *    @param[in]      Node               The number of Node
+ *    @param[in, out] BufferLocPtr       Point to the address of buffer
+ *    @param[in, out] StdHeader          Standard Head Pointer
+ *
+ *    @retval         UINT8 *(New buffer location ptr)
+ */
+UINT8
+STATIC
+*FillMemoryForCurrentNode (
+  IN      UINT8 *PDomain,
+  IN OUT  UINT8 *PDomainForBase640K,
+  IN      UINT8 Node,
+  IN OUT  UINT8 *BufferLocPtr,
+  IN OUT  AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32    ValueLimit;
+  UINT32    ValueTOM;
+  BOOLEAN   isModified;
+  UINT8     Domain;
+  UINT32    RegVal;
+  UINT32    DramLeng;
+  UINT32    DramBase;
+  UINT32    DramLimit;
+  UINT32    OffsetRegs;
+  PCI_ADDR  PciAddress;
+  UINT64    MsrValue;
+  UINT32    TopOfMemoryAbove4Gb;
+
+  Domain = *PDomain;
+
+  PciAddress.Address.Segment = 0;
+  PciAddress.Address.Bus = 0;
+  PciAddress.Address.Device = LOW_NODE_DEVICEID;
+  PciAddress.Address.Function = FUNC_1;
+
+  for (OffsetRegs = DRAMBase0; OffsetRegs < MMIOBase0; OffsetRegs += 8) {
+    isModified = FALSE;        // FALSE means normal update procedure
+    // Get DRAM Base Address
+    PciAddress.Address.Register = OffsetRegs;
+    LibAmdPciRead (AccessWidth32, PciAddress, &DramBase, StdHeader);
+    if ((DramBase & 3) != 3) {
+      // 0:1 set if memory range enabled
+      // Not set, so we don't have an enabled range
+      continue;   // Proceed to next Base register
+    }
+
+    // Get DRAM Limit
+    PciAddress.Address.Register = OffsetRegs + 4;
+    LibAmdPciRead (AccessWidth32, PciAddress, &DramLimit, StdHeader);
+    if (DramLimit == 0xFFFFFFFF) {
+      // Node not installed(all FF's)?
+      continue;   // Proceed to next Base register
+    }
+
+    if ((DramLimit & 0xFF) != Node) {
+      // Check if Destination Node ID is current node
+      continue;   // Proceed to next Base register
+    }
+
+    //    We only add an entry now if detected range belongs to current node/PDomain
+    PciAddress.Address.Register = OffsetRegs + 0x104;
+    LibAmdPciRead (AccessWidth32, PciAddress, &RegVal, StdHeader);
+
+    DramLimit = (((RegVal & 0xFF) << 16) | (DramLimit >> 16));  // Get DRAM Limit addr [47:24]
+    DramLimit++;                     // Add 1 for potential length
+    DramLimit <<= 8;
+
+    // Get DRAM Base Address
+    PciAddress.Address.Register = OffsetRegs + 0x100;
+    LibAmdPciRead (AccessWidth32, PciAddress, &RegVal, StdHeader);
+    DramBase = ((((RegVal & 0xFF) << 24) | (DramBase >> 8)) & 0xFFFFFF00);   // Get DRAM Base Base value [47:24]
+    DramLeng = DramLimit - DramBase;    // Subtract base from limit to get length
+
+    //    Leave hole for conventional memory (Less than 640K).  It must be on CPU 0.
+    if (DramBase == 0) {
+      if (*PDomainForBase640K == 0xFF) {
+        // It is the first time that the range start at 0.
+        // If Yes, then Place 1MB memory gap and save Domain to PDomainForBase640K
+        BufferLocPtr = MakeMemEntry (
+                         Domain,
+                         Node,
+                         0,              // Base = 0
+                         0xA0000 >> 16,  // Put it into format used in DRAM regs..
+                         BufferLocPtr
+                         );
+        DramBase += 0x10;       // Add 1MB, so range = 1MB to Top of Region
+        DramLeng -= 0x10;       // Also subtract 1MB from the length
+        *PDomainForBase640K = Domain;        // Save Domain number for memory Less than 640K
+      } else {
+        // If No, there are more than one memory range less than 640K, it should that
+        // node interleaving is enabled. All nodes have the same memory ranges
+        // and all cores in these nodes belong to the same domain.
+        *PDomain = *PDomainForBase640K;
+        return (BufferLocPtr);
+      }
+    }
+    LibAmdMsrRead (TOP_MEM, &MsrValue, StdHeader);
+    ValueTOM   = (UINT32) MsrValue >> 16;    // Save it in 39:24 format
+    ValueLimit = DramBase + DramLeng;        // We need to know how large region is
+
+    LibAmdMsrRead (SYS_CFG, &MsrValue, StdHeader);
+    if ((MsrValue & BIT21) != 0) {
+      LibAmdMsrRead (TOP_MEM2, &MsrValue, StdHeader);
+      TopOfMemoryAbove4Gb = (UINT32) (MsrValue >> 16);    // Save it in 47:16 format
+    } else {
+      TopOfMemoryAbove4Gb = 0xFFFFFFFF;
+    }
+
+    //  SPECIAL CASES:
+    //
+    //  Several conditions require that we process the values of the memory range differently.
+    //  Here are descriptions of the corner cases.
+    //
+    //  1. TRUNCATE LOW - Memory range starts below TOM, ends in TOM (memory hole).  For this case,
+    //     the range must be truncated to end at TOM.
+    //  *******************************            *******************************
+    //  *                    *        *      ->    *                             *
+    //  *******************************            *******************************
+    //  2                    TOM      4            2                             TOM
+    //
+    //  2. TRUNCATE HIGH - Memory range starts below 4GB, ends above 4GB.  This is handled by changing the
+    //     start base to 4GB.
+    //          ****************                        **********
+    //          *     *        *      ->                *        *
+    //          ****************                        **********
+    //  TOM     3.8   4        6            TOM   3.8   4        6
+    //
+    //  3. Memory range starts below TOM, ends above 4GB.  For this case, the range must be truncated
+    //     to end at TOM.  Note that this scenario creates two ranges, as the second comparison below
+    //     will find that it ends above 4GB since base and limit have been restored after first truncation,
+    //     and a second range will be written based at 4GB ending at original end address.
+    //  *******************************            ****************          **********
+    //  *              *     *        *      ->    *              *          *        *
+    //  *******************************            ****************          **********
+    //  2              TOM   4        6            2              TOM        4        6
+    //
+    //  4. Memory range starts above TOM, ends below or equal to 4GB.  This invalid range should simply
+    //     be ignored.
+    //          *******
+    //          *     *      ->    < NULL >
+    //          *******
+    //  TOM     3.8   4
+    //
+    //  5. Memory range starts below TOM2, and ends beyond TOM2.  This range must be truncated to TOM2.
+    //  ************************         *******************************
+    //  *              *       *   ->    *                             *
+    //  ************************         *******************************
+    //  768          TOM2   1024         768                        TOM2
+    //
+    //  6. Memory range starts above TOM2.  This invalid range should simply be ignored.
+    //          ********************
+    //          *                  *    ->    < NULL >
+    //          ********************
+    //  TOM2    1024            1280
+
+    if (((DramBase < ValueTOM) && (ValueLimit <= FOURGB) && (ValueLimit > ValueTOM))
+        || ((DramBase < ValueTOM) && (ValueLimit > FOURGB))) {
+      //   TRUNCATE LOW!!! Shrink entry below TOM...
+      //   Base = DramBase, Size = TOM - DramBase
+      BufferLocPtr = MakeMemEntry (Domain, Node, DramBase, (ValueTOM - DramBase), BufferLocPtr);
+      isModified = TRUE;
+    }
+
+    if ((ValueLimit > FOURGB) && (DramBase < FOURGB)) {
+      //   TRUNCATE HIGH!!! Shrink entry above 4GB...
+      //   Size = Base + Size - 4GB, Base = 4GB
+      BufferLocPtr = MakeMemEntry (Domain, Node, FOURGB, (DramLeng + DramBase - FOURGB), BufferLocPtr);
+      isModified = TRUE;
+    }
+
+    if ((DramBase >= ValueTOM) && (ValueLimit <= FOURGB)) {
+      //   IGNORE!!!  Entry located entirely within memory hole
+      isModified = TRUE;
+    }
+
+    if ((DramBase < TopOfMemoryAbove4Gb) && (ValueLimit > TopOfMemoryAbove4Gb)) {
+      //   Truncate to TOM2
+      //   Base = DramBase, Size = TOM2 - DramBase
+      BufferLocPtr = MakeMemEntry (Domain, Node, DramBase, (TopOfMemoryAbove4Gb - DramBase), BufferLocPtr);
+      isModified = TRUE;
+    }
+
+    if (DramBase >= TopOfMemoryAbove4Gb) {
+      //   IGNORE!!!  Entry located entirely above TOM2
+      isModified = TRUE;
+    }
+
+    //    If special range(isModified), we are done.
+    //    If not, finally write the memory entry.
+    if (isModified == FALSE) {
+      // Finally write the memory entry.
+      BufferLocPtr = MakeMemEntry (Domain, Node, DramBase, DramLeng, BufferLocPtr);
+    }
+
+  } // for ( OffsetRegs = DRAMBase0; ... )
+
+  return (BufferLocPtr);
+} // FillMemoryForCurrentNode()
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will add APIC entry.
+ *
+ *    @param[in]      ApicId            APIC ID number
+ *    @param[in]      Domain            Domain number
+ *    @param[in]      BufferLocPtr      Point to the address of buffer
+ *
+ *    @retval         UINT8 *(New buffer location ptr)
+ */
+UINT8
+STATIC
+*MakeApicEntry (
+  IN      UINT8 ApicId,
+  IN      UINT8 Domain,
+  IN      UINT8 *BufferLocPtr
+  )
+{
+  CPU_SRAT_APIC_ENTRY *psSratApicEntry;
+  UINT8 ReservedBytes;
+
+  psSratApicEntry = (CPU_SRAT_APIC_ENTRY *)BufferLocPtr;
+
+  psSratApicEntry->Type = AE_APIC;
+  psSratApicEntry->Length = (UINT8)sizeof (CPU_SRAT_APIC_ENTRY);
+  psSratApicEntry->Domain = Domain;
+  psSratApicEntry->ApicId = ApicId;
+  psSratApicEntry->Flags = ENABLED;
+  psSratApicEntry->LSApicEid = 0;
+  for (ReservedBytes = 0; ReservedBytes < (UINT8)sizeof (psSratApicEntry->Reserved); ReservedBytes++) {
+    psSratApicEntry->Reserved[ReservedBytes] = 0;
+  }
+  return (BufferLocPtr + (UINT8)sizeof (CPU_SRAT_APIC_ENTRY));
+} // MakeApicEntry
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function will add Memory entry.
+ *
+ *  Parameters:
+ *    @param[in]  PDomain               Proximity Domain
+ *    @param[in]  Node                  The number of Node
+ *    @param[in]  Base                  Memory Base
+ *    @param[in]  Size                  Memory Size
+ *    @param[in]  BufferLocPtr          Point to the address of buffer
+ *
+ *    @retval       UINT8 * (new buffer location ptr)
+ */
+UINT8
+STATIC
+*MakeMemEntry (
+  IN  UINT8   PDomain,
+  IN  UINT8   Node,
+  IN  UINT32  Base,
+  IN  UINT32  Size,
+  IN  UINT8   *BufferLocPtr
+  )
+{
+  CPU_SRAT_MEMORY_ENTRY *psSratMemEntry;
+  UINT8 ReservedBytes;
+
+  psSratMemEntry = (CPU_SRAT_MEMORY_ENTRY *)BufferLocPtr;
+
+  psSratMemEntry->Type = AE_MEMORY;                       // [0] = Memory Entry
+  psSratMemEntry->Length = (UINT8)sizeof (CPU_SRAT_MEMORY_ENTRY); // [1] = 40
+  psSratMemEntry->Domain = PDomain;                            // [2] = Proximity Domain
+
+  // [6-7] = Reserved
+  for (ReservedBytes = 0; ReservedBytes < (UINT8)sizeof (psSratMemEntry->Reserved1); ReservedBytes++) {
+    psSratMemEntry->Reserved1[ReservedBytes] = 0;
+  }
+
+  // [8-11] = Keep 31:0 of address only -> Base Addr Low
+  psSratMemEntry->BaseAddrLow  = Base << 16;
+
+  // [12-15] = Keep 39:32 of address only -> Base Addr High
+  psSratMemEntry->BaseAddrHigh = Base >> 16;
+
+  // [16-19] = Keep 31:0 of address only -> Length Low
+  psSratMemEntry->LengthAddrLow  = Size << 16;
+
+  // [20-23] = Keep 39:32 of address only -> Length High
+  psSratMemEntry->LengthAddrHigh = Size >> 16;
+
+  // [24-27] = Reserved
+  for (ReservedBytes = 0; ReservedBytes < (UINT8)sizeof (psSratMemEntry->Reserved2); ReservedBytes++) {
+    psSratMemEntry->Reserved2[ReservedBytes] = 0;
+  }
+
+  // [28-31] = Flags
+  psSratMemEntry->Flags = ENABLED;
+
+  // [32-40] = Reserved
+  for (ReservedBytes = 0; ReservedBytes < (UINT8)sizeof (psSratMemEntry->Reserved3); ReservedBytes++) {
+    psSratMemEntry->Reserved3[ReservedBytes] = 0;
+  }
+  return (BufferLocPtr + (UINT8)sizeof (CPU_SRAT_MEMORY_ENTRY));
+} // MakeMemEntry()
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSwC1e.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSwC1e.c
new file mode 100644
index 0000000000..f791e1a523
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSwC1e.c
@@ -0,0 +1,178 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU SW C1e feature support code.
+ *
+ * Contains code that declares the AGESA CPU C1e related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "Topology.h"
+#include "cpuFeatures.h"
+#include "cpuSwC1e.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FEATURE_CPUSWC1E_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE SwC1eFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Should software C1e be enabled
+ *
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               SW C1e is supported.
+ * @retval       FALSE              SW C1e not supported.
+ *
+ */
+BOOLEAN
+STATIC
+IsSwC1eFeatureEnabled (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  BOOLEAN                IsEnabled;
+  BOOLEAN                IsOtherC1eEnabled;
+  AP_MAILBOXES           ApMailboxes;
+  SW_C1E_FAMILY_SERVICES *SwFamilyServices;
+
+  ASSERT (PlatformConfig->C1eMode < MaxC1eMode);
+  IsEnabled = FALSE;
+
+  // Check whether software C1e is enabled only if other C1e methods is/are not supported
+  // or if the platform specifically uses C1eModeSoftwareDeprecated.
+  IsOtherC1eEnabled = (IsFeatureEnabled (HardwareC1e, PlatformConfig, StdHeader) ||
+                       IsFeatureEnabled (MsgBasedC1e, PlatformConfig, StdHeader));
+  if ((PlatformConfig->C1eMode == C1eModeSoftwareDeprecated) ||
+     ((!IsOtherC1eEnabled) && ((PlatformConfig->C1eMode == C1eModeHardwareSoftwareDeprecated) || (PlatformConfig->C1eMode == C1eModeAuto)))) {
+    ASSERT ((PlatformConfig->C1ePlatformData1 < 0x10000) && (PlatformConfig->C1ePlatformData1 != 0));
+    ASSERT (PlatformConfig->C1ePlatformData2 < 0x100);
+    if ((PlatformConfig->C1ePlatformData1 != 0) && (PlatformConfig->C1ePlatformData1 < 0xFFFE) && (PlatformConfig->C1ePlatformData2 < 0xFF)) {
+      if (!IsNonCoherentHt1 (StdHeader)) {
+        if (GetNumberOfProcessors (StdHeader) == 1) {
+          GetApMailbox (&ApMailboxes.ApMailInfo.Info, StdHeader);
+          if (ApMailboxes.ApMailInfo.Fields.ModuleType == 0) {
+            GetFeatureServicesOfCurrentCore (&SwC1eFamilyServiceTable, (CONST VOID **)&SwFamilyServices, StdHeader);
+            if (SwFamilyServices != NULL) {
+              IsEnabled = SwFamilyServices->IsSwC1eSupported (SwFamilyServices, StdHeader);
+            }
+          }
+        }
+      }
+    }
+  }
+  return IsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Enable Software C1e
+ *
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       The most severe status of any family specific service.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeSwC1eFeature (
+  IN       UINT64                 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  AGESA_STATUS AgesaStatus;
+  SW_C1E_FAMILY_SERVICES *FamilyServices;
+
+  AgesaStatus = AGESA_SUCCESS;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "    SW C1e is enabled\n");
+
+  if (IsWarmReset (StdHeader)) {
+    GetFeatureServicesOfCurrentCore (&SwC1eFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+    AgesaStatus = FamilyServices->InitializeSwC1e (FamilyServices, EntryPoint, PlatformConfig, StdHeader);
+  }
+
+  return AgesaStatus;
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureSwC1e =
+{
+  SoftwareC1e,
+  CPU_FEAT_AFTER_PM_INIT,
+  IsSwC1eFeatureEnabled,
+  InitializeSwC1eFeature
+};
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSwC1e.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSwC1e.h
new file mode 100644
index 0000000000..53f97a7ddd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuSwC1e.h
@@ -0,0 +1,120 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU SW C1e Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU C1e related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Feature
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_SW_C1E_H_
+#define _CPU_SW_C1E_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (SW_C1E_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                    T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to check if software C1e is supported.
+ *
+ * @param[in]    SwC1eServices      Software C1e services.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @retval       TRUE               SW C1e is supported.
+ * @retval       FALSE              SW C1e is not supported.
+ *
+ */
+typedef BOOLEAN F_SW_C1E_IS_SUPPORTED (
+  IN       SW_C1E_FAMILY_SERVICES *SwC1eServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method
+typedef F_SW_C1E_IS_SUPPORTED *PF_SW_C1E_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Family specific call to enable software C1e.
+ *
+ * @param[in]    SwC1eServices      Software C1e services.
+ * @param[in]    EntryPoint         Timepoint designator.
+ * @param[in]    PlatformConfig     Contains the runtime modifiable feature input data.
+ * @param[in]    StdHeader          Config Handle for library, services.
+ *
+ * @return       Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_SW_C1E_INIT (
+  IN       SW_C1E_FAMILY_SERVICES *SwC1eServices,
+  IN       UINT64 EntryPoint,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method
+typedef F_SW_C1E_INIT *PF_SW_C1E_INIT;
+
+/**
+ * Provide the interface to the software C1e Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _SW_C1E_FAMILY_SERVICES {
+  UINT16          Revision;                                             ///< Interface version
+  // Public Methods.
+  PF_SW_C1E_IS_SUPPORTED IsSwC1eSupported;                              ///< Method: Family specific call to check if software C1e is supported.
+  PF_SW_C1E_INIT InitializeSwC1e;                                       ///< Method: Family specific call to enable software C1e.
+};
+
+#endif  // _CPU_SW_C1E_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuWhea.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuWhea.c
new file mode 100644
index 0000000000..4e3754153c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Feature/cpuWhea.c
@@ -0,0 +1,284 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD WHEA Table Creation API, and related functions.
+ *
+ * Contains code that produce the ACPI WHEA related information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56322 $   @e \$Date: 2011-07-11 16:51:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionWhea.h"
+#include "cpuLateInit.h"
+#include "heapManager.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUWHEA_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+extern OPTION_WHEA_CONFIGURATION OptionWheaConfiguration;  // global user config record
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+CreateHestBank (
+  IN       AMD_HEST_BANK *HestBankPtr,
+  IN       UINT8 BankNum,
+  IN       AMD_WHEA_INIT_DATA *WheaInitDataPtr
+  );
+
+AGESA_STATUS
+GetAcpiWheaStub (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader,
+  IN OUT   VOID                 **WheaMcePtr,
+  IN OUT   VOID                 **WheaCmcPtr
+  );
+
+AGESA_STATUS
+GetAcpiWheaMain (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader,
+  IN OUT   VOID                 **WheaMcePtr,
+  IN OUT   VOID                 **WheaCmcPtr
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * It will create the ACPI table of WHEA and return the pointer to the table.
+ *
+ *    @param[in, out]  StdHeader        Standard Head Pointer
+ *    @param[in, out]  WheaMcePtr       Point to Whea Hest Mce table
+ *    @param[in, out]  WheaCmcPtr       Point to Whea Hest Cmc table
+ *
+ *    @retval         AGESA_STATUS
+ */
+AGESA_STATUS
+CreateAcpiWhea (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader,
+  IN OUT   VOID                 **WheaMcePtr,
+  IN OUT   VOID                 **WheaCmcPtr
+  )
+{
+  AGESA_TESTPOINT (TpProcCpuEntryWhea, StdHeader);
+  return ((*(OptionWheaConfiguration.WheaFeature)) (StdHeader, WheaMcePtr, WheaCmcPtr));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default routine for use when the WHEA option is NOT requested.
+ *
+ * The option install process will create and fill the transfer vector with
+ * the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ *    @param[in, out]  StdHeader        Standard Head Pointer
+ *    @param[in, out]  WheaMcePtr       Point to Whea Hest Mce table
+ *    @param[in, out]  WheaCmcPtr       Point to Whea Hest Cmc table
+ *
+ *    @retval         AGESA_STATUS
+ */
+
+AGESA_STATUS
+GetAcpiWheaStub (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader,
+  IN OUT   VOID                 **WheaMcePtr,
+  IN OUT   VOID                 **WheaCmcPtr
+  )
+{
+  return  AGESA_UNSUPPORTED;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * It will create the ACPI tale of WHEA and return the pointer to the table.
+ *
+ *    @param[in, out]  StdHeader        Standard Head Pointer
+ *    @param[in, out]  WheaMcePtr       Point to Whea Hest Mce table
+ *    @param[in, out]  WheaCmcPtr       Point to Whea Hest Cmc table
+ *
+ *    @retval         UINT32  AGESA_STATUS
+ */
+AGESA_STATUS
+GetAcpiWheaMain (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader,
+  IN OUT   VOID                 **WheaMcePtr,
+  IN OUT   VOID                 **WheaCmcPtr
+  )
+{
+  UINT8  BankNum;
+  UINT8  Entries;
+  UINT16 HestMceTableSize;
+  UINT16 HestCmcTableSize;
+  UINT64 MsrData;
+  AMD_HEST_MCE_TABLE *HestMceTablePtr;
+  AMD_HEST_CMC_TABLE *HestCmcTablePtr;
+  AMD_HEST_BANK *HestBankPtr;
+  AMD_WHEA_INIT_DATA *WheaInitDataPtr;
+  ALLOCATE_HEAP_PARAMS AllocParams;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  FamilySpecificServices = NULL;
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "  WHEA is created\n");
+
+  // step 1: calculate Hest table size
+  LibAmdMsrRead (MSR_MCG_CAP, &MsrData, StdHeader);
+  BankNum = (UINT8) (((MSR_MCG_CAP_STRUCT *) (&MsrData))->Count);
+  if (BankNum == 0) {
+    return AGESA_ERROR;
+  }
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->GetWheaInitData (FamilySpecificServices, (CONST VOID **) &WheaInitDataPtr, &Entries, StdHeader);
+
+  ASSERT (WheaInitDataPtr->HestBankNum <= BankNum);
+
+  HestMceTableSize = sizeof (AMD_HEST_MCE_TABLE) + WheaInitDataPtr->HestBankNum * sizeof (AMD_HEST_BANK);
+  HestCmcTableSize = sizeof (AMD_HEST_CMC_TABLE) + WheaInitDataPtr->HestBankNum * sizeof (AMD_HEST_BANK);
+
+  HestMceTablePtr = (AMD_HEST_MCE_TABLE *) *WheaMcePtr;
+  HestCmcTablePtr = (AMD_HEST_CMC_TABLE *) *WheaCmcPtr;
+
+  // step 2: allocate a buffer by callback function
+  if ((HestMceTablePtr == NULL) || (HestCmcTablePtr == NULL)) {
+    AllocParams.RequestedBufferSize = (UINT32) (HestMceTableSize + HestCmcTableSize);
+    AllocParams.BufferHandle = AMD_WHEA_BUFFER_HANDLE;
+    AllocParams.Persist = HEAP_SYSTEM_MEM;
+
+    AGESA_TESTPOINT (TpProcCpuBeforeAllocateWheaBuffer, StdHeader);
+    if (HeapAllocateBuffer (&AllocParams, StdHeader) != AGESA_SUCCESS) {
+      return AGESA_ERROR;
+    }
+    AGESA_TESTPOINT (TpProcCpuAfterAllocateWheaBuffer, StdHeader);
+
+    HestMceTablePtr = (AMD_HEST_MCE_TABLE *) AllocParams.BufferPtr;
+    HestCmcTablePtr = (AMD_HEST_CMC_TABLE *) ((UINT8 *) (HestMceTablePtr + 1) + (WheaInitDataPtr->HestBankNum * sizeof (AMD_HEST_BANK)));
+  }
+
+  // step 3: fill in Hest MCE table
+  HestMceTablePtr->TblLength = HestMceTableSize;
+  HestMceTablePtr->GlobCapInitDataLSD = WheaInitDataPtr->GlobCapInitDataLSD;
+  HestMceTablePtr->GlobCapInitDataMSD = WheaInitDataPtr->GlobCapInitDataMSD;
+  HestMceTablePtr->GlobCtrlInitDataLSD = WheaInitDataPtr->GlobCtrlInitDataLSD;
+  HestMceTablePtr->GlobCtrlInitDataMSD = WheaInitDataPtr->GlobCtrlInitDataMSD;
+  HestMceTablePtr->NumHWBanks = WheaInitDataPtr->HestBankNum;
+
+  HestBankPtr = (AMD_HEST_BANK *) (HestMceTablePtr + 1);
+  CreateHestBank (HestBankPtr, WheaInitDataPtr->HestBankNum, WheaInitDataPtr);
+
+  // step 4: fill in Hest CMC table
+  HestCmcTablePtr->NumHWBanks = WheaInitDataPtr->HestBankNum;
+  HestCmcTablePtr->TblLength = HestCmcTableSize;
+
+  HestBankPtr = (AMD_HEST_BANK *) (HestCmcTablePtr + 1);
+  CreateHestBank (HestBankPtr, WheaInitDataPtr->HestBankNum, WheaInitDataPtr);
+
+  // step 5: fill in the incoming structure
+  *WheaMcePtr = HestMceTablePtr;
+  *WheaCmcPtr = HestCmcTablePtr;
+
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * It will create Bank structure for Hest table
+ *
+ *    @param[in]  HestBankPtr           Pointer to the Hest Back structure
+ *    @param[in]  BankNum               The number of Bank
+ *    @param[in]  WheaInitDataPtr     Pointer to the AMD_WHEA_INIT_DATA structure
+ *
+ */
+VOID
+STATIC
+CreateHestBank (
+  IN       AMD_HEST_BANK *HestBankPtr,
+  IN       UINT8 BankNum,
+  IN       AMD_WHEA_INIT_DATA *WheaInitDataPtr
+  )
+{
+  UINT8 BankIndex;
+  for (BankIndex = 0; BankIndex < BankNum; BankIndex++) {
+    HestBankPtr->BankNum = BankIndex;
+    HestBankPtr->ClrStatusOnInit = WheaInitDataPtr->ClrStatusOnInit;
+    HestBankPtr->StatusDataFormat = WheaInitDataPtr->StatusDataFormat;
+    HestBankPtr->ConfWriteEn = WheaInitDataPtr->ConfWriteEn;
+    HestBankPtr->CtrlRegMSRAddr = WheaInitDataPtr->HestBankInitData[BankIndex].CtrlRegMSRAddr;
+    HestBankPtr->CtrlInitDataLSD = WheaInitDataPtr->HestBankInitData[BankIndex].CtrlInitDataLSD;
+    HestBankPtr->CtrlInitDataMSD = WheaInitDataPtr->HestBankInitData[BankIndex].CtrlInitDataMSD;
+    HestBankPtr->StatRegMSRAddr = WheaInitDataPtr->HestBankInitData[BankIndex].StatRegMSRAddr;
+    HestBankPtr->AddrRegMSRAddr = WheaInitDataPtr->HestBankInitData[BankIndex].AddrRegMSRAddr;
+    HestBankPtr->MiscRegMSRAddr = WheaInitDataPtr->HestBankInitData[BankIndex].MiscRegMSRAddr;
+    HestBankPtr++;
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/S3.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/S3.c
new file mode 100644
index 0000000000..207d444bf7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/S3.c
@@ -0,0 +1,1233 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * ACPI S3 Support routines
+ *
+ * Contains routines needed for supporting resume from the ACPI S3 sleep state.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Interface
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_S3_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+SaveDeviceContext (
+  IN       DEVICE_BLOCK_HEADER *DeviceList,
+  IN       CALL_POINTS         CallPoint,
+     OUT   UINT32              *ActualBufferSize,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+VOID
+SavePciDevice (
+  IN       AMD_CONFIG_PARAMS     *StdHeader,
+  IN       PCI_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS           CallPoint,
+  IN OUT   VOID                  **OrMask
+  );
+
+VOID
+SaveConditionalPciDevice (
+  IN       AMD_CONFIG_PARAMS                 *StdHeader,
+  IN       CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS                       CallPoint,
+  IN OUT   VOID                              **OrMask
+  );
+
+VOID
+SaveMsrDevice (
+  IN       AMD_CONFIG_PARAMS     *StdHeader,
+  IN       MSR_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS           CallPoint,
+  IN OUT   UINT64                **OrMask
+  );
+
+VOID
+SaveConditionalMsrDevice (
+  IN       AMD_CONFIG_PARAMS                 *StdHeader,
+  IN       CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS                       CallPoint,
+  IN OUT   UINT64                            **OrMask
+  );
+
+VOID
+RestorePciDevice (
+  IN       AMD_CONFIG_PARAMS     *StdHeader,
+  IN       PCI_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS           CallPoint,
+  IN OUT   VOID                  **OrMask
+  );
+
+VOID
+RestoreConditionalPciDevice (
+  IN       AMD_CONFIG_PARAMS                 *StdHeader,
+  IN       CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS                       CallPoint,
+  IN OUT   VOID                              **OrMask
+  );
+
+VOID
+RestoreMsrDevice (
+  IN       AMD_CONFIG_PARAMS     *StdHeader,
+  IN       MSR_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS           CallPoint,
+  IN OUT   UINT64                **OrMask
+  );
+
+VOID
+RestoreConditionalMsrDevice (
+  IN       AMD_CONFIG_PARAMS                 *StdHeader,
+  IN       CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS                       CallPoint,
+  IN OUT   UINT64                            **OrMask
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves all devices in the given device list.
+ *
+ * This traverses the entire device list twice.  In the first pass, we save
+ * all devices identified as Pre ESR.  In the second pass, we save devices
+ * marked as post ESR.
+ *
+ * @param[in]     DeviceList        Beginning of the device list to save.
+ * @param[in]     Storage           Beginning of the context buffer.
+ * @param[in]     CallPoint         Indicates whether this is AMD_INIT_RESUME or
+ *                                  AMD_S3LATE_RESTORE.
+ * @param[out]    ActualBufferSize  Actual size used in saving the device list.
+ * @param[in]     StdHeader         AMD standard header config param.
+ *
+ */
+VOID
+SaveDeviceListContext (
+  IN       DEVICE_BLOCK_HEADER *DeviceList,
+  IN       VOID                *Storage,
+  IN       CALL_POINTS         CallPoint,
+     OUT   UINT32              *ActualBufferSize,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  // Copy device list over
+  LibAmdMemCopy (Storage,
+                 DeviceList,
+                 (UINTN) DeviceList->RelativeOrMaskOffset,
+                 StdHeader);
+  SaveDeviceContext (Storage, CallPoint, ActualBufferSize, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves all devices in the given device list.
+ *
+ * This traverses the entire device list twice.  In the first pass, we save
+ * all devices identified as Pre ESR.  In the second pass, we save devices
+ * marked as post ESR.
+ *
+ * @param[in,out] DeviceList        Beginning of the device list to save.
+ * @param[in]     CallPoint         Indicates whether this is AMD_INIT_RESUME or
+ *                                  AMD_S3LATE_RESTORE.
+ * @param[out]    ActualBufferSize  Actual size used in saving the device list.
+ * @param[in]     StdHeader         AMD standard header config param.
+ *
+ */
+VOID
+SaveDeviceContext (
+  IN       DEVICE_BLOCK_HEADER *DeviceList,
+  IN       CALL_POINTS         CallPoint,
+     OUT   UINT32              *ActualBufferSize,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  DEVICE_DESCRIPTORS Device;
+  UINT16 i;
+  UINT64 StartAddress;
+  UINT64 EndAddress;
+  VOID *OrMask;
+
+  StartAddress = (UINT64) DeviceList;
+  Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+  OrMask = (UINT8 *) DeviceList + DeviceList->RelativeOrMaskOffset;
+
+  // Process Pre ESR List
+  for (i = 0; i < DeviceList->NumDevices; i++) {
+    switch (Device.CommonDeviceHeader->Type) {
+    case DEV_TYPE_PCI_PRE_ESR:
+      SavePciDevice (StdHeader, Device.PciDevice, CallPoint, &OrMask);
+      // Fall through to advance the pointer after saving context
+    case DEV_TYPE_PCI:
+      Device.PciDevice++;
+      break;
+    case DEV_TYPE_CPCI_PRE_ESR:
+      SaveConditionalPciDevice (StdHeader, Device.CPciDevice, CallPoint, &OrMask);
+      // Fall through to advance the pointer after saving context
+    case DEV_TYPE_CPCI:
+      Device.CPciDevice++;
+      break;
+    case DEV_TYPE_MSR_PRE_ESR:
+      SaveMsrDevice (StdHeader, Device.MsrDevice, CallPoint, (UINT64 **) &OrMask);
+      // Fall through to advance the pointer after saving context
+    case DEV_TYPE_MSR:
+      Device.MsrDevice++;
+      break;
+    case DEV_TYPE_CMSR_PRE_ESR:
+      SaveConditionalMsrDevice (StdHeader, Device.CMsrDevice, CallPoint, (UINT64 **) &OrMask);
+      // Fall through to advance the pointer after saving context
+    case DEV_TYPE_CMSR:
+      Device.CMsrDevice++;
+      break;
+    }
+  }
+
+  Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+  // Process Post ESR List
+  for (i = 0; i < DeviceList->NumDevices; i++) {
+    switch (Device.CommonDeviceHeader->Type) {
+    case DEV_TYPE_PCI:
+      SavePciDevice (StdHeader, Device.PciDevice, CallPoint, &OrMask);
+      // Fall through to advance the pointer after saving context
+    case DEV_TYPE_PCI_PRE_ESR:
+      Device.PciDevice++;
+      break;
+    case DEV_TYPE_CPCI:
+      SaveConditionalPciDevice (StdHeader, Device.CPciDevice, CallPoint, &OrMask);
+      // Fall through to advance the pointer after saving context
+    case DEV_TYPE_CPCI_PRE_ESR:
+      Device.CPciDevice++;
+      break;
+    case DEV_TYPE_MSR:
+      SaveMsrDevice (StdHeader, Device.MsrDevice, CallPoint, (UINT64 **) &OrMask);
+      // Fall through to advance the pointer after saving context
+    case DEV_TYPE_MSR_PRE_ESR:
+      Device.MsrDevice++;
+      break;
+    case DEV_TYPE_CMSR:
+      SaveConditionalMsrDevice (StdHeader, Device.CMsrDevice, CallPoint, (UINT64 **) &OrMask);
+      // Fall through to advance the pointer after saving context
+    case DEV_TYPE_CMSR_PRE_ESR:
+      Device.CMsrDevice++;
+      break;
+    }
+  }
+  EndAddress = (UINT64) OrMask;
+  *ActualBufferSize = (UINT32) (EndAddress - StartAddress);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves the context of a PCI device.
+ *
+ * This traverses the provided register list saving PCI registers.
+ *
+ * @param[in]     StdHeader      AMD standard header config param.
+ * @param[in]     Device         PCI device to restore.
+ * @param[in]     CallPoint      Indicates whether this is AMD_INIT_RESUME or
+ *                               AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask         Current buffer pointer of raw register values.
+ *
+ */
+VOID
+SavePciDevice (
+  IN       AMD_CONFIG_PARAMS     *StdHeader,
+  IN       PCI_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS           CallPoint,
+  IN OUT   VOID                  **OrMask
+  )
+{
+  UINT8   RegSizeInBytes;
+  UINT8   SpecialCaseIndex;
+  UINT8   *IntermediatePtr;
+  UINT16  i;
+  UINT32  Socket;
+  UINT32  Module;
+  UINT32  AndMask;
+  ACCESS_WIDTH AccessWidth;
+  AGESA_STATUS IgnoredSts;
+  PCI_ADDR PciAddress;
+  PCI_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+  GetSocketModuleOfNode ((UINT32) Device->Node,
+                               &Socket,
+                               &Module,
+                               StdHeader);
+  GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+
+  if (CallPoint == INIT_RESUME) {
+    MemFS3GetPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  } else {
+    S3GetPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  }
+
+  for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+    PciAddress.Address.Function = RegisterHdr->RegisterList[i].Function;
+    PciAddress.Address.Register = RegisterHdr->RegisterList[i].Offset;
+    RegSizeInBytes = RegisterHdr->RegisterList[i].Type.RegisterSize;
+    switch (RegSizeInBytes) {
+    case 1:
+      AndMask = 0xFFFFFFFF & ((UINT8) RegisterHdr->RegisterList[i].AndMask);
+      AccessWidth = AccessS3SaveWidth8;
+      break;
+    case 2:
+      AndMask = 0xFFFFFFFF & ((UINT16) RegisterHdr->RegisterList[i].AndMask);
+      AccessWidth = AccessS3SaveWidth16;
+      break;
+    case 3:
+      // In this case, we don't need to save a register. We just need to call a special
+      // function to do certain things in the save and resume sequence.
+      // This should not be used in a non-special case.
+      AndMask = 0;
+      RegSizeInBytes = 0;
+      AccessWidth = 0;
+      break;
+    default:
+      AndMask = RegisterHdr->RegisterList[i].AndMask;
+      RegSizeInBytes = 4;
+      AccessWidth = AccessS3SaveWidth32;
+      break;
+    }
+    if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+      ASSERT ((AndMask != 0) && (RegSizeInBytes != 0) && (AccessWidth != 0));
+      LibAmdPciRead (AccessWidth, PciAddress, *OrMask, StdHeader);
+    } else {
+      SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+      RegisterHdr->SpecialCases[SpecialCaseIndex].Save (AccessWidth, PciAddress, *OrMask, StdHeader);
+    }
+    if (AndMask != 0) {
+      // If AndMask is 0, then it is a not-care. Don't need to apply it to the OrMask
+      **((UINT32 **) OrMask) &= AndMask;
+    }
+    if ((RegSizeInBytes == 0) && (**((UINT32 **) OrMask) == RESTART_FROM_BEGINNING_LIST)) {
+      // Restart from the beginning of the register list
+      i = 0xFFFF;
+    }
+    IntermediatePtr = (UINT8 *) *OrMask;
+    *OrMask = &IntermediatePtr[RegSizeInBytes]; // += RegSizeInBytes;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves the context of a 'conditional' PCI device.
+ *
+ * This traverses the provided register list saving PCI registers when appropriate.
+ *
+ * @param[in]     StdHeader      AMD standard header config param.
+ * @param[in]     Device         'conditional' PCI device to restore.
+ * @param[in]     CallPoint      Indicates whether this is AMD_INIT_RESUME or
+ *                               AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask         Current buffer pointer of raw register values.
+ *
+ */
+VOID
+SaveConditionalPciDevice (
+  IN       AMD_CONFIG_PARAMS                 *StdHeader,
+  IN       CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS                       CallPoint,
+  IN OUT   VOID                              **OrMask
+  )
+{
+  UINT8   RegSizeInBytes;
+  UINT8   SpecialCaseIndex;
+  UINT8   *IntermediatePtr;
+  UINT16  i;
+  UINT32  Socket;
+  UINT32  Module;
+  UINT32  AndMask;
+  ACCESS_WIDTH AccessWidth;
+  AGESA_STATUS IgnoredSts;
+  PCI_ADDR PciAddress;
+  CPCI_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+  GetSocketModuleOfNode ((UINT32) Device->Node,
+                               &Socket,
+                               &Module,
+                               StdHeader);
+  GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+
+  if (CallPoint == INIT_RESUME) {
+    MemFS3GetCPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  } else {
+    S3GetCPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  }
+
+  for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+    if (((Device->Mask1 & RegisterHdr->RegisterList[i].Mask1) != 0) &&
+        ((Device->Mask2 & RegisterHdr->RegisterList[i].Mask2) != 0)) {
+      PciAddress.Address.Function = RegisterHdr->RegisterList[i].Function;
+      PciAddress.Address.Register = RegisterHdr->RegisterList[i].Offset;
+      RegSizeInBytes = RegisterHdr->RegisterList[i].Type.RegisterSize;
+      switch (RegSizeInBytes) {
+      case 1:
+        AndMask = 0xFFFFFFFF & ((UINT8) RegisterHdr->RegisterList[i].AndMask);
+        AccessWidth = AccessS3SaveWidth8;
+        break;
+      case 2:
+        AndMask = 0xFFFFFFFF & ((UINT16) RegisterHdr->RegisterList[i].AndMask);
+        AccessWidth = AccessS3SaveWidth16;
+        break;
+      case 3:
+        // In this case, we don't need to save a register. We just need to call a special
+        // function to do certain things in the save and resume sequence.
+        // This should not be used in a non-special case.
+        AndMask = 0;
+        RegSizeInBytes = 0;
+        AccessWidth = 0;
+        break;
+      default:
+        AndMask = RegisterHdr->RegisterList[i].AndMask;
+        RegSizeInBytes = 4;
+        AccessWidth = AccessS3SaveWidth32;
+        break;
+      }
+      if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+        ASSERT ((AndMask != 0) && (RegSizeInBytes != 0) && (AccessWidth != 0));
+        LibAmdPciRead (AccessWidth, PciAddress, *OrMask, StdHeader);
+      } else {
+        SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+        RegisterHdr->SpecialCases[SpecialCaseIndex].Save (AccessWidth, PciAddress, *OrMask, StdHeader);
+      }
+      if (AndMask != 0) {
+        // If AndMask is 0, then it is a not-care. Don't need to apply it to the OrMask
+        **((UINT32 **) OrMask) &= AndMask;
+      }
+      if ((RegSizeInBytes == 0) && (**((UINT32 **) OrMask) == RESTART_FROM_BEGINNING_LIST)) {
+        // Restart from the beginning of the register list
+        i = 0xFFFF;
+      }
+      IntermediatePtr = (UINT8 *) *OrMask;
+      *OrMask = &IntermediatePtr[RegSizeInBytes]; // += RegSizeInBytes;
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves the context of an MSR device.
+ *
+ * This traverses the provided register list saving MSRs.
+ *
+ * @param[in]     StdHeader      AMD standard header config param.
+ * @param[in]     Device         MSR device to restore.
+ * @param[in]     CallPoint      Indicates whether this is AMD_INIT_RESUME or
+ *                               AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask         Current buffer pointer of raw register values.
+ *
+ */
+VOID
+SaveMsrDevice (
+  IN       AMD_CONFIG_PARAMS     *StdHeader,
+  IN       MSR_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS           CallPoint,
+  IN OUT   UINT64                **OrMask
+  )
+{
+  UINT8   SpecialCaseIndex;
+  UINT16  i;
+  MSR_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+  if (CallPoint == INIT_RESUME) {
+    MemFS3GetMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  } else {
+    S3GetMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  }
+
+  for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+    if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+      LibAmdMsrRead (RegisterHdr->RegisterList[i].Address, *OrMask, StdHeader);
+    } else {
+      SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+      RegisterHdr->SpecialCases[SpecialCaseIndex].Save (RegisterHdr->RegisterList[i].Address, *OrMask, StdHeader);
+    }
+    **OrMask &= RegisterHdr->RegisterList[i].AndMask;
+    (*OrMask)++;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves the context of a 'conditional' MSR device.
+ *
+ * This traverses the provided register list saving MSRs when appropriate.
+ *
+ * @param[in]     StdHeader      AMD standard header config param.
+ * @param[in]     Device         'conditional' MSR device to restore.
+ * @param[in]     CallPoint      Indicates whether this is AMD_INIT_RESUME or
+ *                               AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask         Current buffer pointer of raw register values.
+ *
+ */
+VOID
+SaveConditionalMsrDevice (
+  IN       AMD_CONFIG_PARAMS                 *StdHeader,
+  IN       CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS                       CallPoint,
+  IN OUT   UINT64                            **OrMask
+  )
+{
+  UINT8   SpecialCaseIndex;
+  UINT16  i;
+  CMSR_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+  if (CallPoint == INIT_RESUME) {
+    MemFS3GetCMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  } else {
+    S3GetCMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  }
+
+  for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+    if (((Device->Mask1 & RegisterHdr->RegisterList[i].Mask1) != 0) &&
+        ((Device->Mask2 & RegisterHdr->RegisterList[i].Mask2) != 0)) {
+      if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+        LibAmdMsrRead (RegisterHdr->RegisterList[i].Address, (UINT64 *) *OrMask, StdHeader);
+      } else {
+        SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+        RegisterHdr->SpecialCases[SpecialCaseIndex].Save (RegisterHdr->RegisterList[i].Address, (UINT64 *) *OrMask, StdHeader);
+      }
+      **OrMask &= RegisterHdr->RegisterList[i].AndMask;
+      (*OrMask)++;
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determines the maximum amount of space required to store all raw register
+ * values for the given device list.
+ *
+ * This traverses the entire device list, and calculates the worst case size
+ * of each device in the device list.
+ *
+ * @param[in]     DeviceList     Beginning of the device list.
+ * @param[in]     CallPoint      Indicates whether this is AMD_INIT_RESUME or
+ *                               AMD_S3LATE_RESTORE.
+ * @param[in]     StdHeader      AMD standard header config param.
+ *
+ * @retval        Size in bytes required for storing all registers.
+ */
+UINT32
+GetWorstCaseContextSize (
+  IN       DEVICE_BLOCK_HEADER *DeviceList,
+  IN       CALL_POINTS         CallPoint,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT32 WorstCaseSize;
+  DEVICE_DESCRIPTORS Device;
+  UINT16 i;
+  REGISTER_BLOCK_HEADERS RegisterHdr;
+
+  WorstCaseSize = DeviceList->RelativeOrMaskOffset;
+  Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+
+  // Process Device List
+  for (i = 0; i < DeviceList->NumDevices; i++) {
+    switch (Device.CommonDeviceHeader->Type) {
+    case DEV_TYPE_PCI_PRE_ESR:
+      // PRE_ESR and post ESR take the same amount of space
+    case DEV_TYPE_PCI:
+      if (CallPoint == INIT_RESUME) {
+        MemFS3GetPciDeviceRegisterList (Device.PciDevice, &RegisterHdr.PciRegisters, StdHeader);
+      } else {
+        S3GetPciDeviceRegisterList (Device.PciDevice, &RegisterHdr.PciRegisters, StdHeader);
+      }
+      WorstCaseSize += (RegisterHdr.PciRegisters->NumRegisters * 4);
+      Device.PciDevice++;
+      break;
+    case DEV_TYPE_CPCI_PRE_ESR:
+      // PRE_ESR and post ESR take the same amount of space
+    case DEV_TYPE_CPCI:
+      if (CallPoint == INIT_RESUME) {
+        MemFS3GetCPciDeviceRegisterList (Device.CPciDevice, &RegisterHdr.CPciRegisters, StdHeader);
+      } else {
+        S3GetCPciDeviceRegisterList (Device.CPciDevice, &RegisterHdr.CPciRegisters, StdHeader);
+      }
+      WorstCaseSize += (RegisterHdr.CPciRegisters->NumRegisters * 4);
+      Device.CPciDevice++;
+      break;
+    case DEV_TYPE_MSR_PRE_ESR:
+      // PRE_ESR and post ESR take the same amount of space
+    case DEV_TYPE_MSR:
+      if (CallPoint == INIT_RESUME) {
+        MemFS3GetMsrDeviceRegisterList (Device.MsrDevice, &RegisterHdr.MsrRegisters, StdHeader);
+      } else {
+        S3GetMsrDeviceRegisterList (Device.MsrDevice, &RegisterHdr.MsrRegisters, StdHeader);
+      }
+      WorstCaseSize += (RegisterHdr.MsrRegisters->NumRegisters * 8);
+      Device.MsrDevice++;
+      break;
+    case DEV_TYPE_CMSR_PRE_ESR:
+      // PRE_ESR and post ESR take the same amount of space
+    case DEV_TYPE_CMSR:
+      if (CallPoint == INIT_RESUME) {
+        MemFS3GetCMsrDeviceRegisterList (Device.CMsrDevice, &RegisterHdr.CMsrRegisters, StdHeader);
+      } else {
+        S3GetCMsrDeviceRegisterList (Device.CMsrDevice, &RegisterHdr.CMsrRegisters, StdHeader);
+      }
+      WorstCaseSize += (RegisterHdr.CMsrRegisters->NumRegisters * 8);
+      Device.CMsrDevice++;
+      break;
+    default:
+      ASSERT (FALSE);
+    }
+  }
+  return (WorstCaseSize);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores all devices marked as 'before exiting self-refresh.'
+ *
+ * This traverses the entire device list, restoring all devices identified
+ * as Pre ESR.
+ *
+ * @param[in,out] OrMaskPtr      Current buffer pointer of raw register values.
+ * @param[in]     Storage        Beginning of the device list.
+ * @param[in]     CallPoint      Indicates whether this is AMD_INIT_RESUME or
+ *                               AMD_S3LATE_RESTORE.
+ * @param[in]     StdHeader      AMD standard header config param.
+ *
+ */
+VOID
+RestorePreESRContext (
+     OUT   VOID              **OrMaskPtr,
+  IN       VOID              *Storage,
+  IN       CALL_POINTS       CallPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  DEVICE_DESCRIPTORS Device;
+  UINT16 i;
+  DEVICE_BLOCK_HEADER *DeviceList;
+
+  DeviceList = (DEVICE_BLOCK_HEADER *) Storage;
+  Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+  *OrMaskPtr = (UINT8 *) DeviceList + DeviceList->RelativeOrMaskOffset;
+
+  // Process Pre ESR List
+  for (i = 0; i < DeviceList->NumDevices; i++) {
+    switch (Device.CommonDeviceHeader->Type) {
+    case DEV_TYPE_PCI_PRE_ESR:
+      RestorePciDevice (StdHeader, Device.PciDevice, CallPoint, OrMaskPtr);
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_PCI:
+      Device.PciDevice++;
+      break;
+    case DEV_TYPE_CPCI_PRE_ESR:
+      RestoreConditionalPciDevice (StdHeader, Device.CPciDevice, CallPoint, OrMaskPtr);
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_CPCI:
+      Device.CPciDevice++;
+      break;
+    case DEV_TYPE_MSR_PRE_ESR:
+      RestoreMsrDevice (StdHeader, Device.MsrDevice, CallPoint, (UINT64 **) OrMaskPtr);
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_MSR:
+      Device.MsrDevice++;
+      break;
+    case DEV_TYPE_CMSR_PRE_ESR:
+      RestoreConditionalMsrDevice (StdHeader, Device.CMsrDevice, CallPoint, (UINT64 **) OrMaskPtr);
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_CMSR:
+      Device.CMsrDevice++;
+      break;
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores all devices marked as 'after exiting self-refresh.'
+ *
+ * This traverses the entire device list, restoring all devices identified
+ * as Post ESR.
+ *
+ * @param[in]     OrMaskPtr      Current buffer pointer of raw register values.
+ * @param[in]     Storage        Beginning of the device list.
+ * @param[in]     CallPoint      Indicates whether this is AMD_INIT_RESUME or
+ *                               AMD_S3LATE_RESTORE.
+ * @param[in]     StdHeader      AMD standard header config param.
+ *
+ */
+VOID
+RestorePostESRContext (
+  IN       VOID              *OrMaskPtr,
+  IN       VOID              *Storage,
+  IN       CALL_POINTS       CallPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  DEVICE_DESCRIPTORS Device;
+  UINT16 i;
+  DEVICE_BLOCK_HEADER *DeviceList;
+
+  DeviceList = (DEVICE_BLOCK_HEADER *) Storage;
+  Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+
+  // Process Pre ESR List
+  for (i = 0; i < DeviceList->NumDevices; i++) {
+    switch (Device.CommonDeviceHeader->Type) {
+    case DEV_TYPE_PCI:
+      RestorePciDevice (StdHeader, Device.PciDevice, CallPoint, &OrMaskPtr);
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_PCI_PRE_ESR:
+      Device.PciDevice++;
+      break;
+    case DEV_TYPE_CPCI:
+      RestoreConditionalPciDevice (StdHeader, Device.CPciDevice, CallPoint, &OrMaskPtr);
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_CPCI_PRE_ESR:
+      Device.CPciDevice++;
+      break;
+    case DEV_TYPE_MSR:
+      RestoreMsrDevice (StdHeader, Device.MsrDevice, CallPoint, (UINT64 **) &OrMaskPtr);
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_MSR_PRE_ESR:
+      Device.MsrDevice++;
+      break;
+    case DEV_TYPE_CMSR:
+      RestoreConditionalMsrDevice (StdHeader, Device.CMsrDevice, CallPoint, (UINT64 **) &OrMaskPtr);
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_CMSR_PRE_ESR:
+      Device.CMsrDevice++;
+      break;
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores the context of a PCI device.
+ *
+ * This traverses the provided register list restoring PCI registers.
+ *
+ * @param[in]     StdHeader      AMD standard header config param.
+ * @param[in]     Device         'conditional' PCI device to restore.
+ * @param[in]     CallPoint      Indicates whether this is AMD_INIT_RESUME or
+ *                               AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask         Current buffer pointer of raw register values.
+ *
+ */
+VOID
+RestorePciDevice (
+  IN       AMD_CONFIG_PARAMS     *StdHeader,
+  IN       PCI_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS           CallPoint,
+  IN OUT   VOID                  **OrMask
+  )
+{
+  UINT8   RegSizeInBytes;
+  UINT8   SpecialCaseIndex;
+  UINT8   *IntermediatePtr;
+  UINT16  i;
+  UINT32  Socket;
+  UINT32  Module;
+  UINT32  AndMask;
+  UINT32  RegValueRead;
+  UINT32  RegValueWrite;
+  ACCESS_WIDTH AccessWidth;
+  AGESA_STATUS IgnoredSts;
+  PCI_ADDR PciAddress;
+  PCI_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+  GetSocketModuleOfNode ((UINT32) Device->Node,
+                               &Socket,
+                               &Module,
+                               StdHeader);
+  GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+
+  if (CallPoint == INIT_RESUME) {
+    MemFS3GetPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  } else {
+    S3GetPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  }
+
+  for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+    PciAddress.Address.Function = RegisterHdr->RegisterList[i].Function;
+    PciAddress.Address.Register = RegisterHdr->RegisterList[i].Offset;
+    RegSizeInBytes = RegisterHdr->RegisterList[i].Type.RegisterSize;
+    switch (RegSizeInBytes) {
+    case 1:
+      AndMask = 0xFFFFFFFF & ((UINT8) RegisterHdr->RegisterList[i].AndMask);
+      RegValueWrite = **(UINT8 **)OrMask;
+      AccessWidth = AccessS3SaveWidth8;
+      break;
+    case 2:
+      AndMask = 0xFFFFFFFF & ((UINT16) RegisterHdr->RegisterList[i].AndMask);
+      RegValueWrite = **(UINT16 **)OrMask;
+      AccessWidth = AccessS3SaveWidth16;
+      break;
+    case 3:
+      // In this case, we don't need to restore a register. We just need to call a special
+      // function to do certain things in the save and resume sequence.
+      // This should not be used in a non-special case.
+      AndMask = 0;
+      RegValueWrite = 0;
+      RegSizeInBytes = 0;
+      AccessWidth = 0;
+      break;
+    default:
+      AndMask = RegisterHdr->RegisterList[i].AndMask;
+      RegSizeInBytes = 4;
+      RegValueWrite = **(UINT32 **)OrMask;
+      AccessWidth = AccessS3SaveWidth32;
+      break;
+    }
+    if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+      ASSERT ((AndMask != 0) && (RegSizeInBytes != 0) && (AccessWidth != 0));
+      LibAmdPciRead (AccessWidth, PciAddress, &RegValueRead, StdHeader);
+      RegValueWrite |= RegValueRead & (~AndMask);
+      LibAmdPciWrite (AccessWidth, PciAddress, &RegValueWrite, StdHeader);
+    } else {
+      SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+      if (AndMask != 0) {
+        RegisterHdr->SpecialCases[SpecialCaseIndex].Save (AccessWidth,
+                                             PciAddress,
+                                             &RegValueRead,
+                                             StdHeader);
+        RegValueWrite |= RegValueRead & (~AndMask);
+      }
+      RegisterHdr->SpecialCases[SpecialCaseIndex].Restore (AccessWidth,
+                                             PciAddress,
+                                             &RegValueWrite,
+                                             StdHeader);
+    }
+    IntermediatePtr = (UINT8 *) *OrMask;
+    *OrMask = &IntermediatePtr[RegSizeInBytes]; // += RegSizeInBytes;
+    if ((RegSizeInBytes == 0) && (RegValueWrite == RESTART_FROM_BEGINNING_LIST)) {
+      // Restart from the beginning of the register list
+      i = 0xFFFF;
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores the context of a 'conditional' PCI device.
+ *
+ * This traverses the provided register list restoring PCI registers when appropriate.
+ *
+ * @param[in]     StdHeader      AMD standard header config param.
+ * @param[in]     Device         'conditional' PCI device to restore.
+ * @param[in]     CallPoint      Indicates whether this is AMD_INIT_RESUME or
+ *                               AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask         Current buffer pointer of raw register values.
+ *
+ */
+VOID
+RestoreConditionalPciDevice (
+  IN       AMD_CONFIG_PARAMS                 *StdHeader,
+  IN       CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS                       CallPoint,
+  IN OUT   VOID                              **OrMask
+  )
+{
+  UINT8   RegSizeInBytes;
+  UINT8   SpecialCaseIndex;
+  UINT8   *IntermediatePtr;
+  UINT16  i;
+  UINT32  Socket;
+  UINT32  Module;
+  UINT32  RegValueRead;
+  UINT32  RegValueWrite;
+  UINT32  AndMask;
+  ACCESS_WIDTH AccessWidth;
+  AGESA_STATUS IgnoredSts;
+  PCI_ADDR PciAddress;
+  CPCI_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+  GetSocketModuleOfNode ((UINT32) Device->Node,
+                               &Socket,
+                               &Module,
+                               StdHeader);
+  GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+
+  if (CallPoint == INIT_RESUME) {
+    MemFS3GetCPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  } else {
+    S3GetCPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  }
+
+  for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+    if (((Device->Mask1 & RegisterHdr->RegisterList[i].Mask1) != 0) &&
+        ((Device->Mask2 & RegisterHdr->RegisterList[i].Mask2) != 0)) {
+      PciAddress.Address.Function = RegisterHdr->RegisterList[i].Function;
+      PciAddress.Address.Register = RegisterHdr->RegisterList[i].Offset;
+      RegSizeInBytes = RegisterHdr->RegisterList[i].Type.RegisterSize;
+      switch (RegSizeInBytes) {
+      case 1:
+        AndMask = 0xFFFFFFFF & ((UINT8) RegisterHdr->RegisterList[i].AndMask);
+        RegValueWrite = **(UINT8 **)OrMask;
+        AccessWidth = AccessS3SaveWidth8;
+        break;
+      case 2:
+        AndMask = 0xFFFFFFFF & ((UINT16) RegisterHdr->RegisterList[i].AndMask);
+        RegValueWrite = **(UINT16 **)OrMask;
+        AccessWidth = AccessS3SaveWidth16;
+        break;
+      case 3:
+        // In this case, we don't need to restore a register. We just need to call a special
+        //  function to do certain things in the save and resume sequence.
+        // This should not be used in a non-special case.
+        AndMask = 0;
+        RegValueWrite = 0;
+        RegSizeInBytes = 0;
+        AccessWidth = 0;
+        break;
+      default:
+        AndMask = RegisterHdr->RegisterList[i].AndMask;
+        RegSizeInBytes = 4;
+        RegValueWrite = **(UINT32 **)OrMask;
+        AccessWidth = AccessS3SaveWidth32;
+        break;
+      }
+      if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+        LibAmdPciRead (AccessWidth, PciAddress, &RegValueRead, StdHeader);
+        RegValueWrite |= RegValueRead & (~AndMask);
+        LibAmdPciWrite (AccessWidth, PciAddress, &RegValueWrite, StdHeader);
+      } else {
+        SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+        if (AndMask != 0) {
+          RegisterHdr->SpecialCases[SpecialCaseIndex].Save (AccessWidth,
+                                             PciAddress,
+                                             &RegValueRead,
+                                             StdHeader);
+          RegValueWrite |= RegValueRead & (~AndMask);
+        }
+        RegisterHdr->SpecialCases[SpecialCaseIndex].Restore (AccessWidth,
+                                               PciAddress,
+                                               &RegValueWrite,
+                                               StdHeader);
+      }
+      IntermediatePtr = (UINT8 *) *OrMask;
+      *OrMask = &IntermediatePtr[RegSizeInBytes];
+      if ((RegSizeInBytes == 0) && (RegValueWrite == RESTART_FROM_BEGINNING_LIST)) {
+        // Restart from the beginning of the register list
+        i = 0xFFFF;
+      }
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores the context of an MSR device.
+ *
+ * This traverses the provided register list restoring MSRs.
+ *
+ * @param[in]     StdHeader      AMD standard header config param.
+ * @param[in]     Device         MSR device to restore.
+ * @param[in]     CallPoint      Indicates whether this is AMD_INIT_RESUME or
+ *                               AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask         Current buffer pointer of raw register values.
+ *
+ */
+VOID
+RestoreMsrDevice (
+  IN       AMD_CONFIG_PARAMS     *StdHeader,
+  IN       MSR_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS           CallPoint,
+  IN OUT   UINT64                **OrMask
+  )
+{
+  UINT8   SpecialCaseIndex;
+  UINT16  i;
+  UINT64  RegValueRead;
+  UINT64  RegValueWrite;
+  MSR_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+  if (CallPoint == INIT_RESUME) {
+    MemFS3GetMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  } else {
+    S3GetMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  }
+
+  for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+    RegValueWrite = **OrMask;
+    if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+      LibAmdMsrRead (RegisterHdr->RegisterList[i].Address, &RegValueRead, StdHeader);
+      RegValueWrite |= RegValueRead & (~RegisterHdr->RegisterList[i].AndMask);
+      LibAmdMsrWrite (RegisterHdr->RegisterList[i].Address, &RegValueWrite, StdHeader);
+    } else {
+      SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+      RegisterHdr->SpecialCases[SpecialCaseIndex].Save (RegisterHdr->RegisterList[i].Address,
+                                                           &RegValueRead,
+                                                           StdHeader);
+      RegValueWrite |= RegValueRead & (~RegisterHdr->RegisterList[i].AndMask);
+      RegisterHdr->SpecialCases[SpecialCaseIndex].Restore (RegisterHdr->RegisterList[i].Address,
+                                                           &RegValueWrite,
+                                                           StdHeader);
+    }
+    (*OrMask)++;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores the context of a 'conditional' MSR device.
+ *
+ * This traverses the provided register list restoring MSRs when appropriate.
+ *
+ * @param[in]     StdHeader      AMD standard header config param.
+ * @param[in]     Device         'conditional' MSR device to restore.
+ * @param[in]     CallPoint      Indicates whether this is AMD_INIT_RESUME or
+ *                               AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask         Current buffer pointer of raw register values.
+ *
+ */
+VOID
+RestoreConditionalMsrDevice (
+  IN       AMD_CONFIG_PARAMS                 *StdHeader,
+  IN       CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+  IN       CALL_POINTS                       CallPoint,
+  IN OUT   UINT64                            **OrMask
+  )
+{
+  UINT8   SpecialCaseIndex;
+  UINT16  i;
+  UINT64  RegValueRead;
+  UINT64  RegValueWrite;
+  CMSR_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+  if (CallPoint == INIT_RESUME) {
+    MemFS3GetCMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  } else {
+    S3GetCMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+  }
+
+  for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+    if (((Device->Mask1 & RegisterHdr->RegisterList[i].Mask1) != 0) &&
+        ((Device->Mask2 & RegisterHdr->RegisterList[i].Mask2) != 0)) {
+      RegValueWrite = **OrMask;
+      if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+        LibAmdMsrRead (RegisterHdr->RegisterList[i].Address, &RegValueRead, StdHeader);
+        RegValueWrite |= RegValueRead & (~RegisterHdr->RegisterList[i].AndMask);
+        LibAmdMsrWrite (RegisterHdr->RegisterList[i].Address, &RegValueWrite, StdHeader);
+      } else {
+        SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+        RegisterHdr->SpecialCases[SpecialCaseIndex].Save (RegisterHdr->RegisterList[i].Address,
+                                                           &RegValueRead,
+                                                           StdHeader);
+        RegValueWrite |= RegValueRead & (~RegisterHdr->RegisterList[i].AndMask);
+        RegisterHdr->SpecialCases[SpecialCaseIndex].Restore (RegisterHdr->RegisterList[i].Address,
+                                                             &RegValueWrite,
+                                                             StdHeader);
+      }
+      (*OrMask)++;
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Unique device ID to PCI register list translator.
+ *
+ * This translates the given device header in storage to the appropriate list
+ * of registers in the AGESA image.
+ *
+ * @param[out]   NonMemoryRelatedDeviceList  List of devices to save and restore
+ *                                           during S3LateRestore.
+ * @param[in]    StdHeader                   AMD standard header config param.
+ *
+ */
+VOID
+GetNonMemoryRelatedDeviceList (
+     OUT   DEVICE_BLOCK_HEADER **NonMemoryRelatedDeviceList,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  *NonMemoryRelatedDeviceList = NULL;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Unique device ID to PCI register list translator.
+ *
+ * This translates the given device header in storage to the appropriate list
+ * of registers in the AGESA image.
+ *
+ * @param[in]     Device         Device header containing the unique ID.
+ * @param[out]    RegisterHdr    Output PCI register list pointer.
+ * @param[in]     StdHeader      AMD standard header config param.
+ *
+ * @retval        AGESA_SUCCESS  Always succeeds.
+ */
+AGESA_STATUS
+S3GetPciDeviceRegisterList (
+  IN       PCI_DEVICE_DESCRIPTOR     *Device,
+     OUT   PCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  *RegisterHdr = NULL;
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Unique device ID to 'conditional' PCI register list translator.
+ *
+ * This translates the given device header in storage to the appropriate list
+ * of registers in the AGESA image.
+ *
+ * @param[in]     Device         Device header containing the unique ID.
+ * @param[out]    RegisterHdr    Output 'conditional' PCI register list pointer.
+ * @param[in]     StdHeader      AMD standard header config param.
+ *
+ * @retval        AGESA_SUCCESS  Always succeeds.
+ */
+AGESA_STATUS
+S3GetCPciDeviceRegisterList (
+  IN       CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+     OUT   CPCI_REGISTER_BLOCK_HEADER        **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS                 *StdHeader
+  )
+{
+  *RegisterHdr = NULL;
+  return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Unique device ID to MSR register list translator.
+ *
+ * This translates the given device header in storage to the appropriate list
+ * of registers in the AGESA image.
+ *
+ * @param[in]     Device         Device header containing the unique ID.
+ * @param[out]    RegisterHdr    Output MSR register list pointer.
+ * @param[in]     StdHeader      AMD standard header config param.
+ *
+ * @retval        AGESA_SUCCESS  Always succeeds.
+ */
+AGESA_STATUS
+S3GetMsrDeviceRegisterList (
+  IN       MSR_DEVICE_DESCRIPTOR     *Device,
+     OUT   MSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  *RegisterHdr = NULL;
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Unique device ID to 'conditional' MSR register list translator.
+ *
+ * This translates the given device header in storage to the appropriate list
+ * of registers in the AGESA image.
+ *
+ * @param[in]     Device         Device header containing the unique ID.
+ * @param[out]    RegisterHdr    Output 'conditional' MSR register list pointer.
+ * @param[in]     StdHeader      AMD standard header config param.
+ *
+ * @retval        AGESA_SUCCESS  Always succeeds.
+ */
+AGESA_STATUS
+S3GetCMsrDeviceRegisterList (
+  IN       CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+     OUT   CMSR_REGISTER_BLOCK_HEADER        **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS                 *StdHeader
+  )
+{
+  *RegisterHdr = NULL;
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Constructor for the AMD_S3_PARAMS structure.
+ *
+ * This routine initializes failsafe values for the AMD_S3_PARAMS structure
+ * to be used by the AMD_INIT_RESUME, AMD_S3_SAVE, and AMD_S3LATE_RESTORE
+ * entry points.
+ *
+ * @param[in,out] S3Params       Required input parameter for the AMD_S3_SAVE,
+ *                               AMD_INIT_RESUME, and AMD_S3_SAVE entry points.
+ *
+ */
+VOID
+AmdS3ParamsInitializer (
+  OUT   AMD_S3_PARAMS *S3Params
+  )
+{
+  S3Params->Signature = 0x52545341;
+  S3Params->Version = 0x0000;
+  S3Params->VolatileStorage = NULL;
+  S3Params->VolatileStorageSize = 0x00000000;
+  S3Params->Flags = 0x00000000;
+  S3Params->NvStorage = NULL;
+  S3Params->NvStorageSize = 0x00000000;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/S3.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/S3.h
new file mode 100644
index 0000000000..decac8a777
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/S3.h
@@ -0,0 +1,395 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ *  ACPI S3 support definitions.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 49927 $   @e \$Date: 2011-03-30 11:27:42 -0600 (Wed, 30 Mar 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _S3_H_
+#define _S3_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+#define RESTART_FROM_BEGINNING_LIST 0xFFFFFFFF
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+/* Device related definitions */
+
+/// Header at the beginning of a context save buffer.
+typedef struct {
+  UINT16     Version;                 ///< Version of header
+  UINT16     NumDevices;              ///< Number of devices in the list
+  UINT16     RelativeOrMaskOffset;    ///< Size of device list + header
+} DEVICE_BLOCK_HEADER;
+
+/// S3 device types
+typedef enum {
+  DEV_TYPE_PCI_PRE_ESR,               ///< PCI device before exiting self-refresh
+  DEV_TYPE_PCI,                       ///< PCI device after exiting self-refresh
+  DEV_TYPE_CPCI_PRE_ESR,              ///< 'conditional' PCI device before exiting self-refresh
+  DEV_TYPE_CPCI,                      ///< 'conditional' PCI device after exiting self-refresh
+  DEV_TYPE_MSR_PRE_ESR,               ///< MSR device before exiting self-refresh
+  DEV_TYPE_MSR,                       ///< MSR device after exiting self-refresh
+  DEV_TYPE_CMSR_PRE_ESR,              ///< 'conditional' MSR device before exiting self-refresh
+  DEV_TYPE_CMSR                       ///< 'conditional' MSR device after exiting self-refresh
+} S3_DEVICE_TYPES;
+
+/// S3 restoration call points
+typedef enum {
+  INIT_RESUME,                        ///< AMD_INIT_RESUME
+  S3_LATE_RESTORE                     ///< AMD_S3LATE_RESTORE
+} CALL_POINTS;
+
+/// S3 device common header
+typedef struct {
+  UINT32     RegisterListID;          ///< Unique ID of this device
+  UINT8      Type;                    ///< Appropriate S3_DEVICE_TYPES type
+} DEVICE_DESCRIPTOR;
+
+/// S3 PCI device header
+typedef struct {
+  UINT32     RegisterListID;          ///< Unique ID of this device
+  UINT8      Type;                    ///< DEV_TYPE_PCI / DEV_TYPE_PCI_PRE_ESR
+  UINT8      Node;                    ///< Zero-based node number
+} PCI_DEVICE_DESCRIPTOR;
+
+/// S3 'conditional' PCI device header
+typedef struct {
+  UINT32     RegisterListID;          ///< Unique ID of this device
+  UINT8      Type;                    ///< DEV_TYPE_CPCI / DEV_TYPE_CPCI_PRE_ESR
+  UINT8      Node;                    ///< Zero-based node number
+  UINT8      Mask1;                   ///< Conditional mask 1
+  UINT8      Mask2;                   ///< Conditional mask 2
+} CONDITIONAL_PCI_DEVICE_DESCRIPTOR;
+
+/// S3 MSR device header
+typedef struct {
+  UINT32     RegisterListID;          ///< Unique ID of this device
+  UINT8      Type;                    ///< DEV_TYPE_MSR / DEV_TYPE_MSR_PRE_ESR
+} MSR_DEVICE_DESCRIPTOR;
+
+/// S3 'conditional' MSR device header
+typedef struct {
+  UINT32     RegisterListID;          ///< Unique ID of this device
+  UINT8      Type;                    ///< DEV_TYPE_CMSR / DEV_TYPE_CMSR_PRE_ESR
+  UINT8      Mask1;                   ///< Conditional mask 1
+  UINT8      Mask2;                   ///< Conditional mask 2
+} CONDITIONAL_MSR_DEVICE_DESCRIPTOR;
+
+/* Special case related definitions */
+
+/**
+ * PCI special case save handler
+ *
+ * @param[in]     AccessWidth   8, 16, or 32 bit wide access
+ * @param[in]     Address       full PCI address of the register to save
+ * @param[out]    Value         Value read from the register
+ * @param[in]     ConfigPtr     AMD standard header config parameter
+ *
+ */
+typedef VOID (*PF_S3_SPECIAL_PCI_SAVE) (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR     Address,
+     OUT   VOID         *Value,
+  IN       VOID         *ConfigPtr
+  );
+
+/**
+ * PCI special case restore handler
+ *
+ * @param[in]     AccessWidth   8, 16, or 32 bit wide access
+ * @param[in]     Address       full PCI address of the register to save
+ * @param[in]     Value         Value to write to the register
+ * @param[in]     ConfigPtr     AMD standard header config parameter
+ *
+ */
+typedef VOID (*PF_S3_SPECIAL_PCI_RESTORE) (
+  IN       ACCESS_WIDTH       AccessWidth,
+  IN       PCI_ADDR           PciAddress,
+  IN       VOID               *Value,
+  IN       VOID               *StdHeader
+  );
+
+/**
+ * MSR special case save handler
+ *
+ * @param[in]     MsrAddress    Address of model specific register to save
+ * @param[out]    Value         Value read from the register
+ * @param[in]     ConfigPtr     AMD standard header config parameter
+ *
+ */
+typedef VOID (*PF_S3_SPECIAL_MSR_SAVE) (
+  IN       UINT32             MsrAddress,
+     OUT   UINT64             *Value,
+  IN       VOID               *StdHeader
+  );
+
+/**
+ * MSR special case restore handler
+ *
+ * @param[in]     MsrAddress    Address of model specific register to restore
+ * @param[in]     Value         Value to write to the register
+ * @param[in]     ConfigPtr     AMD standard header config parameter
+ *
+ */
+typedef VOID (*PF_S3_SPECIAL_MSR_RESTORE) (
+  IN       UINT32             MsrAddress,
+  IN       UINT64             *Value,
+  IN       VOID               *StdHeader
+  );
+
+/// PCI special case save/restore structure.
+typedef struct {
+  PF_S3_SPECIAL_PCI_SAVE     Save;    ///< Save routine
+  PF_S3_SPECIAL_PCI_RESTORE  Restore; ///< Restore routine
+} PCI_SPECIAL_CASE;
+
+/// MSR special case save/restore structure.
+typedef struct {
+  PF_S3_SPECIAL_MSR_SAVE     Save;    ///< Save routine
+  PF_S3_SPECIAL_MSR_RESTORE  Restore; ///< Restore routine
+} MSR_SPECIAL_CASE;
+
+/* Register related definitions */
+/// S3 register type bit fields
+typedef struct {
+  UINT8      SpecialCaseIndex:4;      ///< Special Case array index
+  UINT8      RegisterSize:3;          ///< For PCI, 1 = byte, 2 = word, else = dword.
+                                      ///< For MSR, don't care
+  UINT8      SpecialCaseFlag:1;       ///< Indicates special case
+} S3_REGISTER_TYPE;
+
+/// S3 PCI register descriptor.
+typedef struct {
+  S3_REGISTER_TYPE  Type;             ///< Type[7] = special case flag,
+                                      ///< Type[6:3] = register size in bytes,
+                                      ///< Type[2:0] = special case index
+  UINT8             Function;         ///< PCI function of the register
+  UINT16            Offset;           ///< PCI offset of the register
+  UINT32            AndMask;          ///< AND mask to be applied to the value before saving
+} PCI_REG_DESCRIPTOR;
+
+/// S3 'conditional' PCI register descriptor.
+typedef struct {
+  S3_REGISTER_TYPE  Type;             ///< Type[7] = special case flag,
+                                      ///< Type[6:3] = register size in bytes,
+                                      ///< Type[2:0] = special case index
+  UINT8             Function;         ///< PCI function of the register
+  UINT16            Offset;           ///< PCI offset of the register
+  UINT32            AndMask;          ///< AND mask to be applied to the value before saving
+  UINT8             Mask1;            ///< conditional mask 1
+  UINT8             Mask2;            ///< conditional mask 2
+} CONDITIONAL_PCI_REG_DESCRIPTOR;
+
+/// S3 MSR register descriptor.
+typedef struct {
+  S3_REGISTER_TYPE  Type;             ///< Type[7] = special case flag,
+                                      ///< Type[6:3] = reserved,
+                                      ///< Type[2:0] = special case index
+  UINT32            Address;          ///< MSR address
+  UINT64            AndMask;          ///< AND mask to be applied to the value before saving
+} MSR_REG_DESCRIPTOR;
+
+/// S3 'conditional' MSR register descriptor.
+typedef struct {
+  S3_REGISTER_TYPE  Type;             ///< Type[7] = special case flag,
+                                      ///< Type[6:3] = reserved,
+                                      ///< Type[2:0] = special case index
+  UINT32            Address;          ///< MSR address
+  UINT64            AndMask;          ///< AND mask to be applied to the value before saving
+  UINT8             Mask1;            ///< conditional mask 1
+  UINT8             Mask2;            ///< conditional mask 2
+} CONDITIONAL_MSR_REG_DESCRIPTOR;
+
+/// Common header at the beginning of an S3 register list.
+typedef struct {
+  UINT16     Version;                 ///< Version of header
+  UINT16     NumRegisters;            ///< Number of registers in the list
+} REGISTER_BLOCK_HEADER;
+
+/// S3 PCI register list header.
+typedef struct {
+  UINT16                  Version;       ///< Version of header
+  UINT16                  NumRegisters;  ///< Number of registers in the list
+  PCI_REG_DESCRIPTOR      *RegisterList; ///< Pointer to the first register descriptor
+  PCI_SPECIAL_CASE        *SpecialCases; ///< Pointer to array of special case handlers
+} PCI_REGISTER_BLOCK_HEADER;
+
+/// S3 'conditional' PCI register list header.
+typedef struct {
+  UINT16                          Version;       ///< Version of header
+  UINT16                          NumRegisters;  ///< Number of registers in the list
+  CONDITIONAL_PCI_REG_DESCRIPTOR  *RegisterList; ///< Pointer to the first register descriptor
+  PCI_SPECIAL_CASE                *SpecialCases; ///< Pointer to array of special case handlers
+} CPCI_REGISTER_BLOCK_HEADER;
+
+/// S3 MSR register list header.
+typedef struct {
+  UINT16                 Version;       ///< Version of header
+  UINT16                 NumRegisters;  ///< Number of registers in the list
+  MSR_REG_DESCRIPTOR     *RegisterList; ///< Pointer to the first register descriptor
+  MSR_SPECIAL_CASE       *SpecialCases; ///< Pointer to array of special case handlers
+} MSR_REGISTER_BLOCK_HEADER;
+
+/// S3 'conditional' MSR register list header.
+typedef struct {
+  UINT16                          Version;       ///< Version of header
+  UINT16                          NumRegisters;  ///< Number of registers in the list
+  CONDITIONAL_MSR_REG_DESCRIPTOR  *RegisterList; ///< Pointer to the first register descriptor
+  MSR_SPECIAL_CASE                *SpecialCases; ///< Pointer to array of special case handlers
+} CMSR_REGISTER_BLOCK_HEADER;
+
+/// S3 device descriptor pointers for ease of proper pointer advancement.
+typedef union {
+  DEVICE_DESCRIPTOR *CommonDeviceHeader;         ///< Common header
+  PCI_DEVICE_DESCRIPTOR *PciDevice;              ///< PCI header
+  CONDITIONAL_PCI_DEVICE_DESCRIPTOR *CPciDevice; ///< 'conditional' PCI header
+  MSR_DEVICE_DESCRIPTOR *MsrDevice;              ///< MSR header
+  CONDITIONAL_MSR_DEVICE_DESCRIPTOR *CMsrDevice; ///< 'conditional' MSR header
+} DEVICE_DESCRIPTORS;
+
+/// S3 register list header pointers for ease of proper pointer advancement.
+typedef union {
+  DEVICE_DESCRIPTOR          *CommonDeviceHeader; ///< Common header
+  PCI_REGISTER_BLOCK_HEADER  *PciRegisters;       ///< PCI header
+  CPCI_REGISTER_BLOCK_HEADER *CPciRegisters;      ///< 'conditional' PCI header
+  MSR_REGISTER_BLOCK_HEADER  *MsrRegisters;       ///< MSR header
+  CMSR_REGISTER_BLOCK_HEADER *CMsrRegisters;      ///< 'conditional' MSR header
+} REGISTER_BLOCK_HEADERS;
+
+/// S3 Volatile Storage Header
+typedef struct {
+  UINT32  HeapOffset;                             ///< Offset to beginning of heap data
+  UINT32  HeapSize;                               ///< Size of the heap data
+  UINT32  RegisterDataOffset;                     ///< Offset to beginning of raw save data
+  UINT32  RegisterDataSize;                       ///< Size of raw save data
+} S3_VOLATILE_STORAGE_HEADER;
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+UINT32
+GetWorstCaseContextSize (
+  IN       DEVICE_BLOCK_HEADER *DeviceList,
+  IN       CALL_POINTS         CallPoint,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+VOID
+SaveDeviceListContext (
+  IN       DEVICE_BLOCK_HEADER *DeviceList,
+  IN       VOID                *Storage,
+  IN       CALL_POINTS         CallPoint,
+     OUT   UINT32              *ActualBufferSize,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+VOID
+RestorePreESRContext (
+     OUT   VOID **OrMaskPtr,
+  IN       VOID *Storage,
+  IN       CALL_POINTS       CallPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+RestorePostESRContext (
+  IN       VOID *OrMaskPtr,
+  IN       VOID *Storage,
+  IN       CALL_POINTS       CallPoint,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+AmdS3ParamsInitializer (
+     OUT   AMD_S3_PARAMS *S3Params
+  );
+
+VOID
+GetNonMemoryRelatedDeviceList (
+     OUT   DEVICE_BLOCK_HEADER **NonMemoryRelatedDeviceList,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+AGESA_STATUS
+S3GetPciDeviceRegisterList (
+  IN       PCI_DEVICE_DESCRIPTOR     *Device,
+     OUT   PCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+AGESA_STATUS
+S3GetCPciDeviceRegisterList (
+  IN       CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+     OUT   CPCI_REGISTER_BLOCK_HEADER        **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS                 *StdHeader
+  );
+
+AGESA_STATUS
+S3GetMsrDeviceRegisterList (
+  IN       MSR_DEVICE_DESCRIPTOR     *Device,
+     OUT   MSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+AGESA_STATUS
+S3GetCMsrDeviceRegisterList (
+  IN       CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+     OUT   CMSR_REGISTER_BLOCK_HEADER        **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS                 *StdHeader
+  );
+
+
+#endif  // _S3_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Table.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Table.c
new file mode 100644
index 0000000000..c1b25cb953
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Table.c
@@ -0,0 +1,1734 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Register Table Related Functions
+ *
+ * Set registers according to a set of register tables
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 59564 $   @e \$Date: 2011-09-26 12:33:51 -0600 (Mon, 26 Sep 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                            M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "OptionMultiSocket.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Table.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuFeatures.h"
+#include "CommonReturns.h"
+#include "cpuL3Features.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_TABLE_FILECODE
+
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+SetRegistersFromTablesAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+extern CPU_FAMILY_SUPPORT_TABLE L3FeatureFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * An iterator for all the Family and Model Register Tables.
+ *
+ * RegisterTableHandle should be set to NULL to begin iteration, the first time the method is
+ * invoked.  Register tables can be processed, until this method returns NULL.  RegisterTableHandle
+ * should simply be passed back to the method without modification or use by the caller.
+ * The table selector allows the relevant tables for different cores to be iterated, if the family separates
+ * tables.  For example, MSRs can be in a table processed by all cores and PCI registers in a table processed by
+ * primary cores.
+ *
+ * @param[in]     FamilySpecificServices  The current Family Specific Services.
+ * @param[in]     Selector                Select whether to iterate over tables for either all cores, primary cores, bsp, ....
+ * @param[in,out] RegisterTableHandle     IN: The handle of the current register table, or NULL if Begin.
+ *                                        OUT: The handle of the next register table, if not End.
+ * @param[out]    NumberOfEntries         The number of entries in the table returned, if not End.
+ * @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ * @return        The pointer to the next Register Table, or NULL if End.
+ */
+TABLE_ENTRY_FIELDS
+STATIC
+*GetNextRegisterTable (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       TABLE_CORE_SELECTOR     Selector,
+  IN OUT   REGISTER_TABLE       ***RegisterTableHandle,
+     OUT   UINTN                  *NumberOfEntries,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  REGISTER_TABLE **NextTable;
+  TABLE_ENTRY_FIELDS *Entries;
+
+  ASSERT ((FamilySpecificServices != NULL) && (StdHeader != NULL));
+  ASSERT (Selector < TableCoreSelectorMax);
+
+  NextTable = *RegisterTableHandle;
+  if (NextTable == NULL) {
+    // Begin
+    NextTable = FamilySpecificServices->RegisterTableList;
+    IDS_OPTION_HOOK (IDS_REG_TABLE, &NextTable, StdHeader);
+  } else {
+    NextTable++;
+  }
+  // skip if not selected
+  while ((*NextTable != NULL) && (*NextTable)->Selector != Selector) {
+    NextTable++;
+  }
+  if (*NextTable == NULL) {
+    // End
+    *RegisterTableHandle = NULL;
+    Entries = NULL;
+  } else {
+    // Iterate next table
+    *RegisterTableHandle = NextTable;
+    *NumberOfEntries = (*NextTable)->NumberOfEntries;
+    Entries = (TABLE_ENTRY_FIELDS *) (*NextTable)->Table;
+  }
+  return Entries;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Compare counts to a pair of ranges.
+ *
+ * @param[in]       FirstCount       The actual count to be compared to the first range.
+ * @param[in]       SecondCount      The actual count to be compared to the second range.
+ * @param[in]       Ranges           The ranges which the counts are compared to.
+ *
+ * @retval          TRUE             Either one, or both, of the counts is in the range given.
+ * @retval          FALSE            Neither count is in the range given.
+ */
+BOOLEAN
+IsEitherCountInRange (
+  IN       UINTN                FirstCount,
+  IN       UINTN                SecondCount,
+  IN       COUNT_RANGE_FEATURE  Ranges
+  )
+{
+  // Errors: Entire Range value is zero, Min and Max reversed or not <=, ranges overlap (OK if first range is all),
+  // the real counts are too big.
+  ASSERT ((Ranges.Range0Min <= Ranges.Range0Max) &&
+          (Ranges.Range1Min <= Ranges.Range1Max) &&
+          (Ranges.Range0Max != 0) &&
+          (Ranges.Range1Max != 0) &&
+          ((Ranges.Range0Max == COUNT_RANGE_HIGH) || (Ranges.Range0Max < Ranges.Range1Min)) &&
+          ((FirstCount < COUNT_RANGE_HIGH) && (SecondCount < COUNT_RANGE_HIGH)));
+
+  return (BOOLEAN) (((FirstCount <= Ranges.Range0Max) && (FirstCount >= Ranges.Range0Min)) ||
+                   ((SecondCount <= Ranges.Range1Max) && (SecondCount >= Ranges.Range1Min)));
+}
+
+/*-------------------------------------------------------------------------------------*/
+/**
+ * Returns the performance profile features list of the currently running processor core.
+ *
+ * @param[out]      Features          The performance profile features supported by this platform
+ * @param[in]       PlatformConfig    Config handle for platform specific information
+ * @param[in]       StdHeader         Header for library and services
+ *
+ */
+VOID
+GetPerformanceFeatures (
+     OUT   PERFORMANCE_PROFILE_FEATS    *Features,
+  IN       PLATFORM_CONFIGURATION       *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS            *StdHeader
+  )
+{
+  CPUID_DATA  CpuidDataStruct;
+  CPU_SPECIFIC_SERVICES  *FamilySpecificServices;
+  L3_FEATURE_FAMILY_SERVICES *FeatureFamilyServices;
+
+  Features->PerformanceProfileValue = 0;
+  // Reflect Probe Filter Configuration.
+  Features->PerformanceProfileFeatures.ProbeFilter = 0;
+  if (IsFeatureEnabled (L3Features, PlatformConfig, StdHeader)) {
+    GetFeatureServicesOfCurrentCore (&L3FeatureFamilyServiceTable, (CONST VOID **)&FeatureFamilyServices, StdHeader);
+    if ((FeatureFamilyServices != NULL) &&
+        (FeatureFamilyServices->IsHtAssistSupported (FeatureFamilyServices, PlatformConfig, StdHeader))) {
+      Features->PerformanceProfileFeatures.ProbeFilter = 1;
+    }
+  }
+
+  // Reflect Display Refresh Requests use 32 bytes Configuration.
+  Features->PerformanceProfileFeatures.RefreshRequest32Byte = 0;
+  if (PlatformConfig->PlatformProfile.Use32ByteRefresh) {
+    Features->PerformanceProfileFeatures.RefreshRequest32Byte = 1;
+  }
+  // Reflect Mct Isoc Read Priority set to variable Configuration.
+  Features->PerformanceProfileFeatures.MctIsocVariable = 0;
+  if (PlatformConfig->PlatformProfile.UseVariableMctIsocPriority) {
+    Features->PerformanceProfileFeatures.MctIsocVariable = 1;
+  }
+  // Indicate if this boot is a warm reset.
+  Features->PerformanceProfileFeatures.IsWarmReset = 0;
+  if (IsWarmReset (StdHeader)) {
+    Features->PerformanceProfileFeatures.IsWarmReset = 1;
+  }
+
+  // Get L3 Cache present as indicated by CPUID
+  Features->PerformanceProfileFeatures.L3Cache = 0;
+  Features->PerformanceProfileFeatures.NoL3Cache = 1;
+  LibAmdCpuidRead (AMD_CPUID_L2L3Cache_L2TLB, &CpuidDataStruct, StdHeader);
+  if (((CpuidDataStruct.EDX_Reg & 0xFFFC0000) >> 18) != 0) {
+    Features->PerformanceProfileFeatures.L3Cache = 1;
+    Features->PerformanceProfileFeatures.NoL3Cache = 0;
+  }
+
+  // Get VRM select high speed from build option.
+  Features->PerformanceProfileFeatures.VrmHighSpeed = 0;
+  if (PlatformConfig->VrmProperties[CoreVrm].HiSpeedEnable) {
+    Features->PerformanceProfileFeatures.VrmHighSpeed = 1;
+  }
+
+  // Get some family, model specific performance type info.
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  ASSERT (FamilySpecificServices != NULL);
+
+  // Is the Northbridge P-State feature enabled
+  Features->PerformanceProfileFeatures.NbPstates = 0;
+  if (FamilySpecificServices->IsNbPstateEnabled (FamilySpecificServices, PlatformConfig, StdHeader)) {
+    Features->PerformanceProfileFeatures.NbPstates = 1;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the MSR Register Entry.
+ *
+ * @TableEntryTypeMethod{::MsrRegister}.
+ *
+ * Read - Modify - Write the MSR, clearing masked bits, and setting the data bits.
+ *
+ * @param[in]     Entry             The MSR register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForMsrEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT64          MsrData;
+
+  // Even for only single bit fields, use those in the mask.  "Mask nothing" is a bug, even if just by policy.
+  ASSERT (Entry->MsrEntry.Mask != 0);
+
+  LibAmdMsrRead (Entry->MsrEntry.Address, &MsrData, StdHeader);
+  MsrData = MsrData & (~(Entry->MsrEntry.Mask));
+  MsrData = MsrData | Entry->MsrEntry.Data;
+  LibAmdMsrWrite (Entry->MsrEntry.Address, &MsrData, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::PciRegister}.
+ *
+ * Make the current core's PCI address with the function and register for the entry.
+ * Read - Modify - Write the PCI register, clearing masked bits, and setting the data bits.
+ *
+ * @param[in]     Entry             The PCI register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForPciEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32          TempVar32_a;
+  UINT32          MySocket;
+  UINT32          MyModule;
+  UINT32          Ignored;
+  PCI_ADDR        MyPciAddress;
+  AGESA_STATUS    IgnoredSts;
+  TABLE_ENTRY_DATA  PciEntry;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  // Even for only single bit fields, use those in the mask.  "Mask nothing" is a bug, even if just by policy.
+  ASSERT ((Entry->InitialValues[4] == 0) &&
+          (Entry->InitialValues[3] == 0) &&
+          (Entry->PciEntry.Mask != 0));
+
+  LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+  PciEntry.PciEntry = Entry->PciEntry;
+
+  IDS_OPTION_HOOK (IDS_SET_PCI_REGISTER_ENTRY, &PciEntry, StdHeader);
+
+  IdentifyCore (StdHeader, &MySocket, &MyModule, &Ignored, &IgnoredSts);
+  GetPciAddress (StdHeader, MySocket, MyModule, &MyPciAddress, &IgnoredSts);
+  MyPciAddress.Address.Function = PciEntry.PciEntry.Address.Address.Function;
+  MyPciAddress.Address.Register = PciEntry.PciEntry.Address.Address.Register;
+  LibAmdPciRead (AccessWidth32, MyPciAddress, &TempVar32_a, StdHeader);
+  TempVar32_a = TempVar32_a & (~(PciEntry.PciEntry.Mask));
+  TempVar32_a = TempVar32_a | PciEntry.PciEntry.Data;
+  LibAmdPciWrite (AccessWidth32, MyPciAddress, &TempVar32_a, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Family Specific Workaround Register Entry.
+ *
+ * @TableEntryTypeMethod{::FamSpecificWorkaround}.
+ *
+ * Call the function, passing the data.
+ *
+ * See if you can use the other entries or make an entry that covers the fix.
+ * After all, the purpose of having a table entry is to @b NOT have code which
+ * isn't generic feature code, but is family/model code specific to one case.
+ *
+ * @param[in]     Entry             The Family Specific Workaround register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForFamSpecificWorkaroundEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  ASSERT (Entry->FamSpecificEntry.DoAction != NULL);
+
+  Entry->FamSpecificEntry.DoAction (Entry->FamSpecificEntry.Data, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Program HT Phy PCI registers using BKDG values.
+ *
+ * @TableEntryTypeMethod{::HtPhyRegister}.
+ *
+ *
+ * @param[in]       Entry               The type specific entry data to be implemented (that is written).
+ * @param[in]       PlatformConfig      Config handle for platform specific information
+ * @param[in]       StdHeader           Config params for library, services.
+ *
+ */
+VOID
+SetRegisterForHtPhyEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                Link;
+  UINT32                MySocket;
+  UINT32                MyModule;
+  AGESA_STATUS          IgnoredStatus;
+  UINT32                Ignored;
+  CPU_LOGICAL_ID        CpuFamilyRevision;
+  PCI_ADDR              CapabilitySet;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  BOOLEAN               MatchedSublink1;
+  HT_FREQUENCIES        Freq0;
+  HT_FREQUENCIES        Freq1;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT ((Entry->InitialValues[4] == 0) &&
+          ((Entry->HtPhyEntry.TypeFeats.HtPhyLinkValue & ~(HTPHY_LINKTYPE_ALL | HTPHY_LINKTYPE_SL0_AND | HTPHY_LINKTYPE_SL1_AND)) == 0) &&
+          (Entry->HtPhyEntry.Address < HTPHY_REGISTER_MAX));
+
+  IdentifyCore (StdHeader, &MySocket, &MyModule, &Ignored, &IgnoredStatus);
+  GetPciAddress (StdHeader, MySocket, MyModule, &CapabilitySet, &IgnoredStatus);
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  GetCpuServicesFromLogicalId (&CpuFamilyRevision, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  Link = 0;
+  while (FamilySpecificServices->NextLinkHasHtPhyFeats (
+           FamilySpecificServices,
+           &CapabilitySet,
+           &Link,
+           &Entry->HtPhyEntry.TypeFeats,
+           &MatchedSublink1,
+           &Freq0,
+           &Freq1,
+           StdHeader)) {
+    FamilySpecificServices->SetHtPhyRegister (FamilySpecificServices, &Entry->HtPhyEntry, CapabilitySet, Link, StdHeader);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Program a range of HT Phy PCI registers using BKDG values.
+ *
+ * @TableEntryTypeMethod{::HtPhyRangeRegister}.
+ *
+ *
+ * @param[in]       Entry               The type specific entry data to be implemented (that is written).
+ * @param[in]       PlatformConfig      Config handle for platform specific information
+ * @param[in]       StdHeader           Config params for library, services.
+ *
+ */
+VOID
+SetRegisterForHtPhyRangeEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                Link;
+  UINT32                MySocket;
+  UINT32                MyModule;
+  AGESA_STATUS          IgnoredStatus;
+  UINT32                Ignored;
+  CPU_LOGICAL_ID        CpuFamilyRevision;
+  PCI_ADDR              CapabilitySet;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  HT_PHY_TYPE_ENTRY_DATA CurrentHtPhyRegister;
+  BOOLEAN                MatchedSublink1;
+  HT_FREQUENCIES        Freq0;
+  HT_FREQUENCIES        Freq1;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT (((Entry->HtPhyRangeEntry.TypeFeats.HtPhyLinkValue & ~(HTPHY_LINKTYPE_ALL)) == 0) &&
+          (Entry->HtPhyRangeEntry.LowAddress <= Entry->HtPhyRangeEntry.HighAddress) &&
+          (Entry->HtPhyRangeEntry.HighAddress < HTPHY_REGISTER_MAX) &&
+          (Entry->HtPhyRangeEntry.HighAddress != 0));
+
+  CurrentHtPhyRegister.Mask = Entry->HtPhyRangeEntry.Mask;
+  CurrentHtPhyRegister.Data = Entry->HtPhyRangeEntry.Data;
+  CurrentHtPhyRegister.TypeFeats = Entry->HtPhyRangeEntry.TypeFeats;
+
+  IdentifyCore (StdHeader, &MySocket, &MyModule, &Ignored, &IgnoredStatus);
+  GetPciAddress (StdHeader, MySocket, MyModule, &CapabilitySet, &IgnoredStatus);
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  GetCpuServicesFromLogicalId (&CpuFamilyRevision, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  Link = 0;
+  while (FamilySpecificServices->NextLinkHasHtPhyFeats (
+           FamilySpecificServices,
+           &CapabilitySet,
+           &Link,
+           &Entry->HtPhyRangeEntry.TypeFeats,
+           &MatchedSublink1,
+           &Freq0,
+           &Freq1,
+           StdHeader)) {
+    for (CurrentHtPhyRegister.Address = Entry->HtPhyRangeEntry.LowAddress;
+         CurrentHtPhyRegister.Address <= Entry->HtPhyRangeEntry.HighAddress;
+         CurrentHtPhyRegister.Address++) {
+      FamilySpecificServices->SetHtPhyRegister (FamilySpecificServices, &CurrentHtPhyRegister, CapabilitySet, Link, StdHeader);
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Is PackageLink an Internal Link?
+ *
+ * This is a test for the logical link match codes in the user interface, not a test for
+ * the actual northbridge links.
+ *
+ * @param[in]    PackageLink   The link
+ *
+ * @retval       TRUE          This is an internal link
+ * @retval       FALSE         This is not an internal link
+ */
+BOOLEAN
+STATIC
+IsDeemphasisLinkInternal (
+  IN       UINT32  PackageLink
+  )
+{
+  return (BOOLEAN) ((PackageLink <= HT_LIST_MATCH_INTERNAL_LINK_2) && (PackageLink >= HT_LIST_MATCH_INTERNAL_LINK_0));
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the Package Link number, for the current node and real link number.
+ *
+ * Based on the link to package link mapping from BKDG, look up package link for
+ * the input link on the internal node number corresponding to the current core's node.
+ * For single module processors, the northbridge link and package link are the same.
+ *
+ * @param[in]   Link                      the link on the current node.
+ * @param[in]   FamilySpecificServices    CPU specific support interface.
+ * @param[in]   StdHeader                 Config params for library, services.
+ *
+ * @return      the Package Link, HT_LIST_TERMINAL Not connected in package, HT_LIST_MATCH_INTERNAL_LINK package internal link.
+ *
+ */
+UINT32
+STATIC
+LookupPackageLink (
+  IN       UINT32                 Link,
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  UINT32 PackageLinkMapItem;
+  UINT32 PackageLink;
+  AP_MAIL_INFO ApMailbox;
+
+  PackageLink = HT_LIST_TERMINAL;
+
+  GetApMailbox (&ApMailbox.Info, StdHeader);
+
+  if (ApMailbox.Fields.ModuleType != 0) {
+    ASSERT (FamilySpecificServices->PackageLinkMap != NULL);
+    // Use table to find this module's package link
+    PackageLinkMapItem = 0;
+    while ((*FamilySpecificServices->PackageLinkMap)[PackageLinkMapItem].Link != HT_LIST_TERMINAL) {
+      if (((*FamilySpecificServices->PackageLinkMap)[PackageLinkMapItem].Module == ApMailbox.Fields.Module) &&
+          ((*FamilySpecificServices->PackageLinkMap)[PackageLinkMapItem].Link == Link)) {
+        PackageLink = (*FamilySpecificServices->PackageLinkMap)[PackageLinkMapItem].PackageLink;
+        break;
+      }
+      PackageLinkMapItem++;
+    }
+  } else {
+    PackageLink = Link;
+  }
+  return PackageLink;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the platform's specified deemphasis levels for the current link.
+ *
+ * Search the platform's list for a match to the current link and also matching frequency.
+ * If a match is found, use the specified deemphasis levels.
+ *
+ * @param[in]       Socket                    The current Socket.
+ * @param[in]       Link                      The link on that socket.
+ * @param[in]       Frequency                 The frequency the link is set to.
+ * @param[in]       PlatformConfig            Config handle for platform specific information
+ * @param[in]       FamilySpecificServices    CPU specific support interface.
+ * @param[in]       StdHeader                 Config params for library, services.
+ *
+ * @return          The Deemphasis values for the link.
+ */
+UINT32
+STATIC
+GetLinkDeemphasis (
+  IN       UINT32                  Socket,
+  IN       UINT32                  Link,
+  IN       HT_FREQUENCIES          Frequency,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32 Result;
+  CPU_HT_DEEMPHASIS_LEVEL *Match;
+  UINT32 PackageLink;
+
+  PackageLink = LookupPackageLink (Link, FamilySpecificServices, StdHeader);
+  // All External and Internal links have deemphasis level none as the default.
+  // However, it is expected that the platform BIOS will provide deemphasis levels for the external links.
+  Result = ((DCV_LEVEL_NONE) | (DEEMPHASIS_LEVEL_NONE));
+
+  if (PlatformConfig->PlatformDeemphasisList != NULL) {
+    Match = PlatformConfig->PlatformDeemphasisList;
+    while (Match->Socket != HT_LIST_TERMINAL) {
+      if (((Match->Socket == Socket) || (Match->Socket == HT_LIST_MATCH_ANY)) &&
+          ((Match->Link == PackageLink) ||
+           ((Match->Link == HT_LIST_MATCH_ANY) && (!IsDeemphasisLinkInternal (PackageLink))) ||
+           ((Match->Link == HT_LIST_MATCH_INTERNAL_LINK) && (IsDeemphasisLinkInternal (PackageLink)))) &&
+          ((Match->LoFreq <= Frequency) && (Match->HighFreq >= Frequency))) {
+        // Found a match, get the deemphasis value.
+        ASSERT ((MaxPlatformDeemphasisLevel > Match->DcvDeemphasis) | (MaxPlatformDeemphasisLevel > Match->ReceiverDeemphasis));
+        Result = ((1 << Match->DcvDeemphasis) | (1 << Match->ReceiverDeemphasis));
+        break;
+      } else {
+        Match++;
+      }
+    }
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Program Deemphasis registers using BKDG values, for the platform specified levels.
+ *
+ * @TableEntryTypeMethod{::DeemphasisRegister}.
+ *
+ *
+ * @param[in]    Entry            The type specific entry data to be implemented (that is written).
+ * @param[in]    PlatformConfig   Config handle for platform specific information
+ * @param[in]    StdHeader        Config params for library, services.
+ *
+ */
+VOID
+SetRegisterForDeemphasisEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                Link;
+  UINT32                MySocket;
+  UINT32                MyModule;
+  AGESA_STATUS          IgnoredStatus;
+  UINT32                Ignored;
+  CPU_LOGICAL_ID        CpuFamilyRevision;
+  PCI_ADDR              CapabilitySet;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  BOOLEAN               MatchedSublink1;
+  HT_FREQUENCIES        Freq0;
+  HT_FREQUENCIES        Freq1;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT (((Entry->DeemphasisEntry.Levels.DeemphasisValues & ~(VALID_DEEMPHASIS_LEVELS)) == 0) &&
+          ((Entry->DeemphasisEntry.HtPhyEntry.TypeFeats.HtPhyLinkValue & ~(HTPHY_LINKTYPE_ALL)) == 0) &&
+          (Entry->DeemphasisEntry.HtPhyEntry.Address < HTPHY_REGISTER_MAX));
+
+  IdentifyCore (StdHeader, &MySocket, &MyModule, &Ignored, &IgnoredStatus);
+  GetPciAddress (StdHeader, MySocket, MyModule, &CapabilitySet, &IgnoredStatus);
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  GetCpuServicesFromLogicalId (&CpuFamilyRevision, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  Link = 0;
+  while (FamilySpecificServices->NextLinkHasHtPhyFeats (
+           FamilySpecificServices,
+           &CapabilitySet,
+           &Link,
+           &Entry->DeemphasisEntry.HtPhyEntry.TypeFeats,
+           &MatchedSublink1,
+           &Freq0,
+           &Freq1,
+           StdHeader)) {
+    if (DoesEntryTypeSpecificInfoMatch (
+          GetLinkDeemphasis (
+            MySocket,
+            (MatchedSublink1 ? (Link + 4) : Link),
+            (MatchedSublink1 ? Freq1 : Freq0),
+            PlatformConfig,
+            FamilySpecificServices,
+            StdHeader),
+          Entry->DeemphasisEntry.Levels.DeemphasisValues)) {
+      FamilySpecificServices->SetHtPhyRegister (
+        FamilySpecificServices,
+        &Entry->DeemphasisEntry.HtPhyEntry,
+        CapabilitySet,
+        Link,
+        StdHeader
+        );
+      IDS_HDT_CONSOLE (HT_TRACE, "Socket %d Module %d Sub-link %1d :\n  ----> running on HT3, %s Level is %s\n",
+        MySocket, MyModule,
+        ((Entry->DeemphasisEntry.HtPhyEntry.TypeFeats.HtPhyLinkValue & HTPHY_LINKTYPE_SL0_ALL) != 0) ? Link : (Link + 4),
+        ((Entry->DeemphasisEntry.Levels.DeemphasisValues & DCV_LEVELS_ALL) != 0) ? "DCV" : "Deemphasis",
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DEEMPHASIS_LEVEL_NONE) ? " 0 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DEEMPHASIS_LEVEL__3) ? " - 3 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DEEMPHASIS_LEVEL__6) ? " - 6 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DEEMPHASIS_LEVEL__6) ? " - 6 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DEEMPHASIS_LEVEL__8) ? " - 8 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DEEMPHASIS_LEVEL__11) ? " - 11 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DEEMPHASIS_LEVEL__11_8) ? " - 11 dB postcursor with - 8 dB precursor" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DCV_LEVEL_NONE) ? " 0 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DCV_LEVEL__2) ? " - 2 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DCV_LEVEL__3) ? " - 3 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DCV_LEVEL__5) ? " - 5 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DCV_LEVEL__6) ? " - 6 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DCV_LEVEL__7) ? " - 7 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DCV_LEVEL__8) ? " - 8 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DCV_LEVEL__9) ? " - 9 dB" :
+        (Entry->DeemphasisEntry.Levels.DeemphasisValues == DCV_LEVEL__11) ? " - 11 dB" : "Undefined");
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Program HT Phy PCI registers which have complex frequency dependencies.
+ *
+ * @TableEntryTypeMethod{::HtPhyFreqRegister}.
+ *
+ * After matching a link for HT Features, check if the HT frequency matches the given range.
+ * If it does, get the northbridge frequency limits for implemented NB P-states and check if
+ * each matches the given range - range 0 and range 1 for each NB frequency, respectively.
+ * If all matches, apply the entry.
+ *
+ * @param[in]       Entry               The type specific entry data to be implemented (that is written).
+ * @param[in]       PlatformConfig      Config handle for platform specific information
+ * @param[in]       StdHeader           Config params for library, services.
+ *
+ */
+VOID
+SetRegisterForHtPhyFreqEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                Link;
+  UINT32                MySocket;
+  UINT32                MyModule;
+  AGESA_STATUS          IgnoredStatus;
+  UINT32                Ignored;
+  CPU_LOGICAL_ID        CpuFamilyRevision;
+  PCI_ADDR              CapabilitySet;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  BOOLEAN               MatchedSublink1;
+  HT_FREQUENCIES        Freq0;
+  HT_FREQUENCIES        Freq1;
+  BOOLEAN               Temp1;
+  BOOLEAN               Temp2;
+  UINT32                NbFreq0;
+  UINT32                NbFreq1;
+  UINT32                NbDivisor0;
+  UINT32                NbDivisor1;
+
+  // Errors:  extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT (((Entry->HtPhyFreqEntry.HtPhyEntry.TypeFeats.HtPhyLinkValue & ~(HTPHY_LINKTYPE_ALL)) == 0) &&
+          (Entry->HtPhyFreqEntry.HtPhyEntry.Address < HTPHY_REGISTER_MAX));
+
+  IdentifyCore (StdHeader, &MySocket, &MyModule, &Ignored, &IgnoredStatus);
+  GetPciAddress (StdHeader, MySocket, MyModule, &CapabilitySet, &IgnoredStatus);
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  GetCpuServicesFromLogicalId (&CpuFamilyRevision, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  Link = 0;
+  while (FamilySpecificServices->NextLinkHasHtPhyFeats (
+           FamilySpecificServices,
+           &CapabilitySet,
+           &Link,
+           &Entry->HtPhyFreqEntry.HtPhyEntry.TypeFeats,
+           &MatchedSublink1,
+           &Freq0,
+           &Freq1,
+           StdHeader)) {
+    // Check the HT Frequency for match to the range.
+    if (IsEitherCountInRange (
+          (MatchedSublink1 ? Freq1 : Freq0),
+          (MatchedSublink1 ? Freq1 : Freq0),
+          Entry->HtPhyFreqEntry.HtFreqCounts.HtFreqCountRanges)) {
+      // Get the NB Frequency, convert to 100's of MHz, then convert to equivalent HT encoding.  This supports
+      // NB frequencies from 800 MHz to 2600 MHz, which is currently greater than any processor supports.
+      OptionMultiSocketConfiguration.GetSystemNbPstateSettings (
+        (UINT32) 0,
+        PlatformConfig,
+        &NbFreq0,
+        &NbDivisor0,
+        &Temp1,
+        &Temp2,
+        StdHeader);
+
+      if (OptionMultiSocketConfiguration.GetSystemNbPstateSettings (
+            (UINT32) 1,
+            PlatformConfig,
+            &NbFreq1,
+            &NbDivisor1,
+            &Temp1,
+            &Temp2,
+            StdHeader)) {
+        ASSERT (NbDivisor1 != 0);
+        NbFreq1 = (NbFreq1 / NbDivisor1);
+        NbFreq1 = (NbFreq1 / 100);
+        NbFreq1 = (NbFreq1 / 2) + 1;
+      } else {
+        NbFreq1 = 0;
+      }
+
+      ASSERT (NbDivisor0 != 0);
+      NbFreq0 = (NbFreq0 / NbDivisor0);
+      NbFreq0 = (NbFreq0 / 100);
+      NbFreq0 = (NbFreq0 / 2) + 1;
+      if (IsEitherCountInRange (NbFreq0, NbFreq1, Entry->HtPhyFreqEntry.NbFreqCounts.HtFreqCountRanges)) {
+        FamilySpecificServices->SetHtPhyRegister (
+          FamilySpecificServices,
+          &Entry->HtPhyFreqEntry.HtPhyEntry,
+          CapabilitySet,
+          Link,
+          StdHeader);
+      }
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Performance Profile PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::ProfileFixup}.
+ *
+ * Check the entry's performance profile features to the platform's and do the
+ * PCI register entry if they match.
+ *
+ * @param[in]     Entry             The Performance Profile register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForPerformanceProfileEntry (
+  IN       TABLE_ENTRY_DATA      *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  PERFORMANCE_PROFILE_FEATS PlatformProfile;
+  TABLE_ENTRY_DATA          PciEntry;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT (((Entry->TokenPciEntry.TypeFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0) &&
+          (Entry->InitialValues[4] == 0));
+
+  GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+  if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue,
+                                      Entry->FixupEntry.TypeFeats.PerformanceProfileValue)) {
+    LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+    PciEntry.PciEntry = Entry->FixupEntry.PciEntry;
+    SetRegisterForPciEntry (&PciEntry, PlatformConfig, StdHeader);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the HT Phy Performance Profile Register Entry.
+ *
+ * @TableEntryTypeMethod{::HtPhyProfileRegister}.
+ *
+ * @param[in]     Entry             The HT Phy register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForHtPhyProfileEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  PERFORMANCE_PROFILE_FEATS PlatformProfile;
+  TABLE_ENTRY_DATA          HtPhyEntry;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT (((Entry->HtPhyProfileEntry.TypeFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0) &&
+          (Entry->InitialValues[5] == 0));
+
+  GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+  if (DoesEntryTypeSpecificInfoMatch (
+        PlatformProfile.PerformanceProfileValue,
+        Entry->HtPhyProfileEntry.TypeFeats.PerformanceProfileValue)) {
+    LibAmdMemFill (&HtPhyEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+    HtPhyEntry.HtPhyEntry = Entry->HtPhyProfileEntry.HtPhyEntry;
+    SetRegisterForHtPhyEntry (&HtPhyEntry, PlatformConfig, StdHeader);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the HT Host PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::HtHostPciRegister}.
+ *
+ * Make the current core's PCI address with the function and register for the entry.
+ * For all HT links, check the link's feature set for a match to the entry.
+ * Read - Modify - Write the PCI register, clearing masked bits, and setting the data bits.
+ *
+ * @param[in]     Entry             The PCI register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForHtHostEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINTN                 Link;
+  UINT32                MySocket;
+  UINT32                MyModule;
+  AGESA_STATUS          IgnoredStatus;
+  UINT32                Ignored;
+  CPU_LOGICAL_ID        CpuFamilyRevision;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  PCI_ADDR              CapabilitySet;
+  PCI_ADDR              PciAddress;
+  HT_HOST_FEATS         HtHostFeats;
+  UINT32                RegisterData;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT ((Entry->InitialValues[4] == 0) &&
+          ((Entry->HtHostEntry.TypeFeats.HtHostValue & ~((HT_HOST_FEATURES_ALL) | (HT_HOST_AND))) == 0) &&
+          (Entry->HtHostEntry.Address.Address.Register < HT_LINK_HOST_CAP_MAX));
+
+  HtHostFeats.HtHostValue = 0;
+  IdentifyCore (StdHeader, &MySocket, &MyModule, &Ignored, &IgnoredStatus);
+  GetPciAddress (StdHeader, MySocket, MyModule, &CapabilitySet, &IgnoredStatus);
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  GetCpuServicesFromLogicalId (&CpuFamilyRevision, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  Link = 0;
+  while (FamilySpecificServices->GetNextHtLinkFeatures (FamilySpecificServices, &Link, &CapabilitySet, &HtHostFeats, StdHeader)) {
+    if (DoesEntryTypeSpecificInfoMatch (HtHostFeats.HtHostValue, Entry->HtHostEntry.TypeFeats.HtHostValue)) {
+      // Do the HT Host PCI register update.
+      PciAddress = CapabilitySet;
+      PciAddress.Address.Register += Entry->HtHostEntry.Address.Address.Register;
+      LibAmdPciRead (AccessWidth32, PciAddress, &RegisterData, StdHeader);
+      RegisterData = RegisterData & (~(Entry->HtHostEntry.Mask));
+      RegisterData = RegisterData | Entry->HtHostEntry.Data;
+      LibAmdPciWrite (AccessWidth32, PciAddress, &RegisterData, StdHeader);
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the HT Host Performance PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::HtHostPerfPciRegister}.
+ *
+ * Make the current core's PCI address with the function and register for the entry.
+ * For all HT links, check the link's feature set for a match to the entry.
+ * Read - Modify - Write the PCI register, clearing masked bits, and setting the data bits.
+ *
+ * @param[in]     Entry             The PCI register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForHtHostPerfEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  PERFORMANCE_PROFILE_FEATS PlatformProfile;
+  TABLE_ENTRY_DATA HtHostPciTypeEntryData;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT ((Entry->InitialValues[5] == 0) &&
+          ((Entry->HtHostEntry.TypeFeats.HtHostValue & ~((HT_HOST_FEATURES_ALL) | (HT_HOST_AND))) == 0) &&
+          (Entry->HtHostEntry.Address.Address.Register < HT_LINK_HOST_CAP_MAX));
+
+  // Check for any performance profile features.
+  GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+  if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue,
+                                      Entry->HtHostPerfEntry.PerformanceFeats.PerformanceProfileValue)) {
+    // Perform HT Host entry process.
+    LibAmdMemFill (&HtHostPciTypeEntryData, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+    HtHostPciTypeEntryData.HtHostEntry = Entry->HtHostPerfEntry.HtHostEntry;
+    SetRegisterForHtHostEntry (&HtHostPciTypeEntryData, PlatformConfig, StdHeader);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set the HT Link Token Count registers.
+ *
+ * @TableEntryTypeMethod{::HtTokenPciRegister}.
+ *
+ * Make the current core's PCI address with the function and register for the entry.
+ * Check the performance profile features.
+ * For all HT links, check the link's feature set for a match to the entry.
+ * Read - Modify - Write the PCI register, clearing masked bits, and setting the data bits.
+ *
+ * @param[in]     Entry             The Link Token register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForHtLinkTokenEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINTN                 Link;
+  UINT32                MySocket;
+  UINT32                MyModule;
+  AGESA_STATUS          IgnoredStatus;
+  UINT32                Ignored;
+  CPU_LOGICAL_ID        CpuFamilyRevision;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  PCI_ADDR              CapabilitySet;
+  HT_HOST_FEATS         HtHostFeats;
+  PERFORMANCE_PROFILE_FEATS PlatformProfile;
+  UINTN                 ProcessorCount;
+  UINTN                     SystemDegree;
+  UINT32                RegisterData;
+  PCI_ADDR              PciAddress;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT (((Entry->HtTokenEntry.LinkFeats.HtHostValue & ~((HT_HOST_FEATURES_ALL) | (HT_HOST_AND))) == 0) &&
+          ((Entry->HtTokenEntry.PerformanceFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0) &&
+          (Entry->HtTokenEntry.Mask != 0));
+
+  HtHostFeats.HtHostValue = 0;
+  IdentifyCore (StdHeader, &MySocket, &MyModule, &Ignored, &IgnoredStatus);
+  GetPciAddress (StdHeader, MySocket, MyModule, &CapabilitySet, &IgnoredStatus);
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  GetCpuServicesFromLogicalId (&CpuFamilyRevision, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+  // Check if the actual processor count and SystemDegree are in either range.
+  ProcessorCount = GetNumberOfProcessors (StdHeader);
+  SystemDegree = GetSystemDegree (StdHeader);
+  if (IsEitherCountInRange (ProcessorCount, SystemDegree, Entry->HtTokenEntry.ConnectivityCount.ConnectivityCountRanges)) {
+    // Check for any performance profile features.
+    GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+    if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue,
+                                        Entry->HtTokenEntry.PerformanceFeats.PerformanceProfileValue)) {
+      // Check the link features.
+      Link = 0;
+      while (FamilySpecificServices->GetNextHtLinkFeatures (FamilySpecificServices, &Link, &CapabilitySet, &HtHostFeats, StdHeader)) {
+        if (DoesEntryTypeSpecificInfoMatch (HtHostFeats.HtHostValue, Entry->HtTokenEntry.LinkFeats.HtHostValue)) {
+          // Do the HT Host PCI register update. Token register are four registers, sublink 0 and 1 share fields.
+          // If sublink 0 is unconnected, we should let sublink 1 match.  If the links are ganged, of course only sublink 0 matches.
+          // If the links are unganged and both connected, the BKDG settings are for both coherent.
+          PciAddress = CapabilitySet;
+          PciAddress.Address.Register = Entry->HtTokenEntry.Address.Address.Register +
+            ((Link > 3) ? (((UINT32)Link - 4) * 4) : ((UINT32)Link * 4));
+          PciAddress.Address.Function = Entry->HtTokenEntry.Address.Address.Function;
+          LibAmdPciRead (AccessWidth32, PciAddress, &RegisterData, StdHeader);
+          RegisterData = RegisterData & (~(Entry->HtTokenEntry.Mask));
+          RegisterData = RegisterData | Entry->HtTokenEntry.Data;
+          LibAmdPciWrite (AccessWidth32, PciAddress, &RegisterData, StdHeader);
+        }
+      }
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Core Counts Performance PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::CoreCountsPciRegister}.
+ *
+ * Check the performance profile.
+ * Check the actual core count to the range pair given, and apply if matched.
+ *
+ * @param[in]     Entry             The PCI register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForCoreCountsPerformanceEntry (
+  IN       TABLE_ENTRY_DATA      *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  PERFORMANCE_PROFILE_FEATS PlatformProfile;
+  UINTN ActualCoreCount;
+  TABLE_ENTRY_DATA          PciEntry;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT (((Entry->CoreCountEntry.TypeFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0));
+
+  GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+  if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue, Entry->CoreCountEntry.TypeFeats.PerformanceProfileValue)) {
+    ActualCoreCount = GetActiveCoresInCurrentModule (StdHeader);
+    // Check if the actual core count is in either range.
+    if (IsEitherCountInRange (ActualCoreCount, ActualCoreCount, Entry->CoreCountEntry.CoreCounts.CoreRanges)) {
+      LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+      PciEntry.PciEntry = Entry->CoreCountEntry.PciEntry;
+      SetRegisterForPciEntry (&PciEntry, PlatformConfig, StdHeader);
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Processor Counts PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::ProcCountsPciRegister}.
+ *
+ * Check the performance profile.
+ * Check the actual processor count (not node count!) to the range pair given, and apply if matched.
+ *
+ * @param[in]     Entry             The PCI register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForProcessorCountsEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  PERFORMANCE_PROFILE_FEATS PlatformProfile;
+  UINTN ProcessorCount;
+  TABLE_ENTRY_DATA          PciEntry;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT (((Entry->ProcCountEntry.TypeFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0));
+
+  GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+  if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue, Entry->ProcCountEntry.TypeFeats.PerformanceProfileValue)) {
+    ProcessorCount = GetNumberOfProcessors (StdHeader);
+    // Check if the actual processor count is in either range.
+    if (IsEitherCountInRange (ProcessorCount, ProcessorCount, Entry->ProcCountEntry.ProcessorCounts.ProcessorCountRanges)) {
+      LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+      PciEntry.PciEntry = Entry->ProcCountEntry.PciEntry;
+      SetRegisterForPciEntry (&PciEntry, PlatformConfig, StdHeader);
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Compute Unit Counts PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::CompUnitCountsPciRegister}.
+ *
+ * Check the entry's performance profile features and the compute unit count
+ * to the platform's and do the PCI register entry if they match.
+ *
+ * @param[in]     Entry             The PCI register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForComputeUnitCountsEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  PERFORMANCE_PROFILE_FEATS PlatformProfile;
+  UINTN ComputeUnitCount;
+  TABLE_ENTRY_DATA          PciEntry;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT (((Entry->CompUnitCountEntry.TypeFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0));
+
+  GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+  if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue, Entry->CompUnitCountEntry.TypeFeats.PerformanceProfileValue)) {
+    ComputeUnitCount = GetNumberOfCompUnitsInCurrentModule (StdHeader);
+    // Check if the actual compute unit count is in either range.
+    if (IsEitherCountInRange (ComputeUnitCount, ComputeUnitCount, Entry->CompUnitCountEntry.ComputeUnitCounts.ComputeUnitRanges)) {
+      LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+      PciEntry.PciEntry = Entry->CompUnitCountEntry.PciEntry;
+      SetRegisterForPciEntry (&PciEntry, PlatformConfig, StdHeader);
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Compute Unit Counts MSR Register Entry.
+ *
+ * @TableEntryTypeMethod{::CompUnitCountsMsr}.
+ *
+ * Check the entry's compute unit count to the platform's and do the
+ * MSR entry if they match.
+ *
+ * @param[in]     Entry             The PCI register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetMsrForComputeUnitCountsEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINTN ComputeUnitCount;
+  TABLE_ENTRY_DATA          MsrEntry;
+
+  ComputeUnitCount = GetNumberOfCompUnitsInCurrentModule (StdHeader);
+  // Check if the actual compute unit count is in either range.
+  if (IsEitherCountInRange (ComputeUnitCount, ComputeUnitCount, Entry->CompUnitCountMsrEntry.ComputeUnitCounts.ComputeUnitRanges)) {
+    LibAmdMemFill (&MsrEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+    MsrEntry.MsrEntry = Entry->CompUnitCountMsrEntry.MsrEntry;
+    SetRegisterForMsrEntry (&MsrEntry, PlatformConfig, StdHeader);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Processor Token Counts PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::TokenPciRegister}.
+ *
+ * The table criteria then translate as:
+ * - 2 Socket, half populated  ==   Degree 1
+ * - 4 Socket, half populated   ==  Degree 2
+ * - 2 Socket, fully populated  ==  Degree 3
+ * - 4 Socket, fully populated  ==  Degree > 3.  (4 or 5 if 3P, 6 if 4P)
+ *
+ * @param[in]     Entry             The PCI register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForTokenPciEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  PERFORMANCE_PROFILE_FEATS PlatformProfile;
+  UINTN                     SystemDegree;
+  UINT32                    ProcessorPackageType;
+  TABLE_ENTRY_DATA          PciEntry;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT ((Entry->TokenPciEntry.PackageType.PackageTypeValue & ~(PACKAGE_TYPE_ALL)) == 0);
+  ASSERT (((Entry->TokenPciEntry.TypeFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0));
+
+  ProcessorPackageType = LibAmdGetPackageType (StdHeader);
+  if (DoesEntryTypeSpecificInfoMatch (ProcessorPackageType, Entry->TokenPciEntry.PackageType.PackageTypeValue)) {
+  GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+  if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue, Entry->TokenPciEntry.TypeFeats.PerformanceProfileValue)) {
+    SystemDegree = GetSystemDegree (StdHeader);
+    // Check if the system degree is in the range.
+    if (IsEitherCountInRange (SystemDegree, SystemDegree, Entry->TokenPciEntry.ConnectivityCount.ConnectivityCountRanges)) {
+      LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+      PciEntry.PciEntry = Entry->TokenPciEntry.PciEntry;
+      SetRegisterForPciEntry (&PciEntry, PlatformConfig, StdHeader);
+    }
+  }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the HT Link Feature PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::HtFeatPciRegister}.
+ *
+ * Set a single field (that is, the register field is not in HT Host capability or a
+ * set of per link registers) in PCI config, based on HT link features and package type.
+ * This code is used for two cases: single link processors and multilink processors.
+ * For single link cases, the link will be tested for a match to the HT Features for the link.
+ * For multilink processors, the entry will match if @b any link is found which matches.
+ * For example, a setting can be applied based on coherent HT3 by matching coherent AND HT3.
+ *
+ * Make the core's PCI address.  Check the package type (currently more important to the single link case),
+ * and if matching, iterate through all links checking for an HT feature match until found or exhausted.
+ * If a match was found, pass the PCI entry data to the implementer for writing for the current core.
+ *
+ * @param[in]     Entry             The PCI register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForHtFeaturePciEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINTN                 Link;
+  UINT32                MySocket;
+  UINT32                MyModule;
+  AGESA_STATUS          IgnoredStatus;
+  UINT32                Ignored;
+  CPU_LOGICAL_ID        CpuFamilyRevision;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  PCI_ADDR              CapabilitySet;
+  HT_HOST_FEATS         HtHostFeats;
+  UINT32                ProcessorPackageType;
+  BOOLEAN               IsMatch;
+  TABLE_ENTRY_DATA      PciEntry;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT ((Entry->HtFeatPciEntry.PciEntry.Mask != 0) &&
+          ((Entry->HtFeatPciEntry.LinkFeats.HtHostValue & ~((HT_HOST_FEATURES_ALL) | (HT_HOST_AND))) == 0));
+
+  HtHostFeats.HtHostValue = 0;
+  LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+  PciEntry.PciEntry = Entry->HtFeatPciEntry.PciEntry;
+  IdentifyCore (StdHeader, &MySocket, &MyModule, &Ignored, &IgnoredStatus);
+  GetPciAddress (StdHeader, MySocket, MyModule, &CapabilitySet, &IgnoredStatus);
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  GetCpuServicesFromLogicalId (&CpuFamilyRevision, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+  ASSERT ((Entry->HtFeatPciEntry.PackageType.PackageTypeValue & ~(PACKAGE_TYPE_ALL)) == 0);
+
+  ProcessorPackageType = LibAmdGetPackageType (StdHeader);
+  if (DoesEntryTypeSpecificInfoMatch (ProcessorPackageType, Entry->HtFeatPciEntry.PackageType.PackageTypeValue)) {
+    IsMatch = FALSE;
+    while (FamilySpecificServices->GetNextHtLinkFeatures (FamilySpecificServices, &Link, &CapabilitySet, &HtHostFeats, StdHeader)) {
+      if (DoesEntryTypeSpecificInfoMatch (HtHostFeats.HtHostValue, Entry->HtFeatPciEntry.LinkFeats.HtHostValue)) {
+        IsMatch = TRUE;
+        break;
+      }
+    }
+    if (IsMatch) {
+      // Do the PCI register update.
+      SetRegisterForPciEntry (&PciEntry, PlatformConfig, StdHeader);
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the HT Link PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::HtLinkPciRegister}.
+ *
+ * Make the current core's PCI address with the function and register for the entry.
+ * Registers are processed for match per link, assuming sequential PCI address per link.
+ * Read - Modify - Write each matching link's PCI register, clearing masked bits, and setting the data bits.
+ *
+ * @param[in]     Entry             The PCI register entry to perform
+ * @param[in]     PlatformConfig    Config handle for platform specific information
+ * @param[in]     StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForHtLinkPciEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINTN                 Link;
+  UINT32                MySocket;
+  UINT32                MyModule;
+  AGESA_STATUS          IgnoredStatus;
+  UINT32                Ignored;
+  CPU_LOGICAL_ID        CpuFamilyRevision;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  PCI_ADDR              CapabilitySet;
+  HT_HOST_FEATS         HtHostFeats;
+  TABLE_ENTRY_DATA      PciEntry;
+
+  // Errors:  Possible values in unused entry space, extra type features, value range checks.
+  // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+  ASSERT ((Entry->HtLinkPciEntry.PciEntry.Mask != 0) &&
+          ((Entry->HtLinkPciEntry.LinkFeats.HtHostValue & ~((HT_HOST_FEATURES_ALL) | (HT_HOST_AND))) == 0));
+
+  HtHostFeats.HtHostValue = 0;
+  LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+  PciEntry.PciEntry = Entry->HtLinkPciEntry.PciEntry;
+  IdentifyCore (StdHeader, &MySocket, &MyModule, &Ignored, &IgnoredStatus);
+  GetPciAddress (StdHeader, MySocket, MyModule, &CapabilitySet, &IgnoredStatus);
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  GetCpuServicesFromLogicalId (&CpuFamilyRevision, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+  Link = 0;
+  while (FamilySpecificServices->GetNextHtLinkFeatures (FamilySpecificServices, &Link, &CapabilitySet, &HtHostFeats, StdHeader)) {
+    if (DoesEntryTypeSpecificInfoMatch (HtHostFeats.HtHostValue, Entry->HtLinkPciEntry.LinkFeats.HtHostValue)) {
+      // Do the update to the link's non-Host PCI register, based on the entry address.
+      PciEntry.PciEntry.Address = Entry->HtLinkPciEntry.PciEntry.Address;
+      PciEntry.PciEntry.Address.Address.Register = PciEntry.PciEntry.Address.Address.Register + ((UINT32)Link * 4);
+      SetRegisterForPciEntry (&PciEntry, PlatformConfig, StdHeader);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * Returns the platform features list of the currently running processor core.
+ *
+ * @param[out]      Features          The Features supported by this platform
+ * @param[in]       PlatformConfig    Config handle for platform specific information
+ * @param[in]       StdHeader         Header for library and services
+ *
+ */
+VOID
+GetPlatformFeatures (
+     OUT   PLATFORM_FEATS         *Features,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  PCI_ADDR  PciAddress;
+  UINT32    CapabilityReg;
+  UINT32     Link;
+  CPU_SPECIFIC_SERVICES  *FamilySpecificServices;
+  UINT32     CoreCount;
+
+  // Start with none.
+  Features->PlatformValue = 0;
+
+  switch (PlatformConfig->PlatformProfile.PlatformControlFlowMode) {
+  case Nfcm:
+    Features->PlatformFeatures.PlatformNfcm = 1;
+    break;
+  case UmaDr:
+    Features->PlatformFeatures.PlatformUma = 1;
+    break;
+  case UmaIfcm:
+    Features->PlatformFeatures.PlatformUmaIfcm = 1;
+    break;
+  case Ifcm:
+    Features->PlatformFeatures.PlatformIfcm = 1;
+    break;
+  case Iommu:
+    Features->PlatformFeatures.PlatformIommu = 1;
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+  // Check - Single Link?
+  // This is based on the implemented links on the package regardless of their
+  // connection status.  All processors must match the BSP, so we only check it and
+  // not the current node.  We don't care exactly how many links there are, as soon
+  // as we find more than one we are done.
+  Link = 0;
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0, PCI_DEV_BASE, FUNC_0, 0);
+  // Until either all capabilities are done or until the desired link is found,
+  // keep looking for HT Host Capabilities.
+  while (Link < 2) {
+    LibAmdPciFindNextCap (&PciAddress, StdHeader);
+    if (PciAddress.AddressValue != ILLEGAL_SBDFO) {
+      LibAmdPciRead (AccessWidth32, PciAddress, &CapabilityReg, StdHeader);
+      if ((CapabilityReg & 0xE00000FF) == 0x20000008) {
+        Link++;
+      }
+      // A capability other than an HT capability, keep looking.
+    } else {
+      // end of capabilities
+      break;
+    }
+  }
+  if (Link < 2) {
+    Features->PlatformFeatures.PlatformSingleLink = 1;
+  } else {
+    Features->PlatformFeatures.PlatformMultiLink = 1;
+  }
+
+  // Set the legacy core count bits.
+  GetActiveCoresInCurrentSocket (&CoreCount, StdHeader);
+  switch (CoreCount) {
+  case 1:
+    Features->PlatformFeatures.PlatformSingleCore = 1;
+    break;
+  case 2:
+    Features->PlatformFeatures.PlatformDualCore = 1;
+    break;
+  default:
+    Features->PlatformFeatures.PlatformMultiCore = 1;
+  }
+
+  //
+  // Get some specific platform type info, VC...etc.
+  //
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  ASSERT (FamilySpecificServices != NULL);
+  FamilySpecificServices->GetPlatformTypeSpecificInfo (FamilySpecificServices, Features, StdHeader);
+
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Checks if a register table entry applies to the executing core.
+ *
+ * This function uses a combination of logical ID and platform features to
+ * determine whether or not a register table entry applies to the executing core.
+ *
+ * @param[in]     CoreCpuRevision         The current core's logical ID
+ * @param[in]     EntryCpuRevision        The entry's desired logical IDs
+ * @param[in]     PlatformFeatures        The platform features
+ * @param[in]     EntryFeatures           The entry's desired platform features
+ *
+ * @retval        TRUE           This entry should be applied
+ * @retval        FALSE          This entry does not apply
+ *
+ */
+BOOLEAN
+STATIC
+DoesEntryMatchPlatform (
+  IN       CPU_LOGICAL_ID   CoreCpuRevision,
+  IN       CPU_LOGICAL_ID   EntryCpuRevision,
+  IN       PLATFORM_FEATS   PlatformFeatures,
+  IN       PLATFORM_FEATS   EntryFeatures
+  )
+{
+  BOOLEAN Result;
+
+  Result = FALSE;
+
+  if (((CoreCpuRevision.Family & EntryCpuRevision.Family) != 0) &&
+      ((CoreCpuRevision.Revision & EntryCpuRevision.Revision) != 0)) {
+    if (EntryFeatures.PlatformFeatures.AndPlatformFeats == 0) {
+      // Match if ANY entry feats match a platform feat (an OR test)
+      if ((EntryFeatures.PlatformValue & PlatformFeatures.PlatformValue) != 0) {
+        Result = TRUE;
+      }
+    } else {
+      // Match if ALL entry feats match a platform feat (an AND test)
+      if ((EntryFeatures.PlatformValue & ~(AMD_PF_AND)) ==
+          (EntryFeatures.PlatformValue & PlatformFeatures.PlatformValue)) {
+        Result = TRUE;
+      }
+    }
+  }
+
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Checks register table entry type specific criteria to the platform.
+ *
+ * Entry Data Type implementer methods can use this generically to check their own
+ * specific criteria.  The method collects the actual platform characteristics and
+ * provides them along with the table entry's criteria to this service.
+ *
+ * There are a couple considerations for any implementer method using this service.
+ * The criteria value has to be representable as a UINT32.  The MSB, Bit 31, has to
+ * be used as a AND test request if set in the entry.  (The platform value should never
+ * have that bit set.)
+ *
+ * @param[in]     PlatformTypeSpecificFeatures        The platform features
+ * @param[in]     EntryTypeFeatures                   The entry's desired platform features
+ *
+ * @retval        TRUE                                This entry should be applied
+ * @retval        FALSE                               This entry does not apply
+ *
+ */
+BOOLEAN
+DoesEntryTypeSpecificInfoMatch (
+  IN       UINT32   PlatformTypeSpecificFeatures,
+  IN       UINT32   EntryTypeFeatures
+  )
+{
+  BOOLEAN Result;
+
+  Result = FALSE;
+
+  if ((EntryTypeFeatures & BIT31) == 0) {
+    // Match if ANY entry feats match a platform feat (an OR test)
+    if ((EntryTypeFeatures & PlatformTypeSpecificFeatures) != 0) {
+      Result = TRUE;
+    }
+  } else {
+    // Match if ALL entry feats match a platform feat (an AND test)
+    if ((EntryTypeFeatures & ~(BIT31)) == (EntryTypeFeatures & PlatformTypeSpecificFeatures)) {
+      Result = TRUE;
+    }
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determine this core's Selector matches.
+ *
+ * @param[in]  Selector    Is the current core this selector type?
+ * @param[in]  StdHeader   Config handle for library and services.
+ *
+ * @retval  TRUE           Yes, it is.
+ * @retval  FALSE          No, it is not.
+ */
+BOOLEAN
+STATIC
+IsCoreSelector (
+  IN       TABLE_CORE_SELECTOR       Selector,
+  IN       AMD_CONFIG_PARAMS        *StdHeader
+  )
+{
+  BOOLEAN Result;
+  AGESA_STATUS  CalledStatus;
+
+  Result = TRUE;
+  ASSERT (Selector < TableCoreSelectorMax);
+
+  if ((Selector == PrimaryCores) && !IsCurrentCorePrimary (StdHeader)) {
+    Result = FALSE;
+  }
+  if ((Selector == CorePairPrimary) && !IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, StdHeader)) {
+    Result = FALSE;
+  }
+  if ((Selector == BscCore) && (!IsBsp (StdHeader, &CalledStatus))) {
+    Result = FALSE;
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set the registers for this core based on entries in a list of Register Tables.
+ *
+ * Determine the platform features and this core's logical id.  Get the specific table
+ * entry type implementations for the logical model, which may be either generic (the ones
+ * in this file) or specific.
+ *
+ * Scan the tables starting the with ones for all cores and progressively narrowing the selection
+ * based on this core's role (ex. primary core).  For a selected table, check for each entry
+ * matching the current core and platform, and call the implementer method to perform the
+ * register set operation if it matches.
+ *
+ * @param[in]  PlatformConfig    Config handle for platform specific information
+ * @param[in]  StdHeader         Config handle for library and services.
+ *
+ */
+VOID
+SetRegistersFromTables (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  CPU_LOGICAL_ID         CpuLogicalId;
+  PLATFORM_FEATS         PlatformFeatures;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  TABLE_ENTRY_FIELDS    *Entries;
+  TABLE_CORE_SELECTOR    Selector;
+  TABLE_ENTRY_TYPE       EntryType;
+  REGISTER_TABLE       **TableHandle;
+  UINTN                  NumberOfEntries;
+  UINTN                  CurrentEntryCount;
+  TABLE_ENTRY_TYPE_DESCRIPTOR *TypeImplementer;
+  PF_DO_TABLE_ENTRY       DoTableEntry[TableEntryTypeMax];
+
+  // Did you really mean to increase the size of ALL table entries??!!
+  // While it is not necessarily a bug to increase the size of table entries:
+  //   - Is this warning a surprise?  Please fix it.
+  //   - If expected, is this really a feature which is worth the increase?  Then let other entries also use the space.
+  ASSERT (sizeof (TABLE_ENTRY_DATA) == (MAX_ENTRY_TYPE_ITEMS32 * sizeof (UINT32)));
+
+  PlatformFeatures.PlatformValue = 0;
+  GetLogicalIdOfCurrentCore (&CpuLogicalId, StdHeader);
+  GetPlatformFeatures (&PlatformFeatures, PlatformConfig, StdHeader);
+  GetCpuServicesFromLogicalId (&CpuLogicalId, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+  // Build a non-sparse table of implementer methods, so we don't have to keep searching.
+  // It is a bug to not include a descriptor for a type that is in the table (but the
+  // descriptor can point to a non-assert stub).
+  // Also, it is not a bug to have no register table implementations, but it is a bug to have none and call this routine.
+  for (EntryType = MsrRegister; EntryType < TableEntryTypeMax; EntryType++) {
+    DoTableEntry[EntryType] = (PF_DO_TABLE_ENTRY)CommonAssert;
+  }
+  TypeImplementer = FamilySpecificServices->TableEntryTypeDescriptors;
+  ASSERT (TypeImplementer != NULL);
+  while (TypeImplementer->EntryType < TableEntryTypeMax) {
+    DoTableEntry[TypeImplementer->EntryType] = TypeImplementer->DoTableEntry;
+    TypeImplementer++;
+  }
+
+  for (Selector = AllCores; Selector < TableCoreSelectorMax; Selector++) {
+    if (IsCoreSelector (Selector, StdHeader)) {
+      // If the current core is the selected type of core, work the table list for tables for that type of core.
+      TableHandle = NULL;
+      Entries = GetNextRegisterTable (FamilySpecificServices, Selector, &TableHandle, &NumberOfEntries, StdHeader);
+      while (Entries != NULL) {
+        for (CurrentEntryCount = 0; CurrentEntryCount < NumberOfEntries; CurrentEntryCount++, Entries++) {
+          if (DoesEntryMatchPlatform (CpuLogicalId, Entries->CpuRevision, PlatformFeatures, Entries->Features)) {
+            // The entry matches this config, Do It!
+            // Find the implementer for this entry type and pass the entry data to it.
+            ASSERT (Entries->EntryType < TableEntryTypeMax);
+            DoTableEntry[Entries->EntryType] (&Entries->Entry, PlatformConfig, StdHeader);
+          }
+        }
+        Entries = GetNextRegisterTable (FamilySpecificServices, Selector, &TableHandle, &NumberOfEntries, StdHeader);
+      }
+    } else {
+      // Once a selector does not match the current core, quit looking.
+      break;
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set the registers for this core based on entries in a list of Register Tables.
+ *
+ * This function acts as a wrapper for calling the SetRegistersFromTables
+ * routine at AmdInitEarly.
+ *
+ *  @param[in]   FamilyServices      The current Family Specific Services.
+ *  @param[in]   EarlyParams         Service parameters.
+ *  @param[in]   StdHeader           Config handle for library and services.
+ *
+ */
+VOID
+SetRegistersFromTablesAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  AGESA_TESTPOINT (TpProcCpuProcessRegisterTables, StdHeader);
+  SetRegistersFromTables (&EarlyParams->PlatformConfig, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Table.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/Table.h
new file mode 100644
index 0000000000..16c3baa67b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Table.h
@@ -0,0 +1,1296 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Register Table Related Functions
+ *
+ * Contains code to initialize the CPU MSRs and PCI registers with BKDG recommended values
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 59564 $   @e \$Date: 2011-09-26 12:33:51 -0600 (Mon, 26 Sep 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_TABLE_H_
+#define _CPU_TABLE_H_
+
+#define MAX_ENTRY_TYPE_ITEMS32 6        // The maximum number of initializer items for UINT32 entry data types.
+
+/**
+ * @page regtableimpl Register Table Implementation Guide
+ *
+ * This register table implementation is modular and extensible, so that support code as
+ * well as table data can be family specific or built out if not needed, and new types
+ * of table entries can be added with low overhead.  Because many aspects are now generic,
+ * there can be common implementations for CPU revision and platform feature matching and for
+ * finding and iterating tables.
+ *
+ * @par Adding a new table entry type.
+ *
+ * To add a new table entry type follow these steps.
+ * <ul>
+ * <li>  Add a member to the enum TABLE_ENTRY_TYPE which is a descriptive name of the entry's purpose
+ *       or distinct characteristics.
+ *
+ * <li>  Create an entry data struct with the customized data needed.  For example, custom register designations,
+ *       data and mask sizes, or feature comparisons.  Name your struct by adding "_" and upper-casing the enum name
+ *       and adding "_TYPE_ENTRY_DATA" at the end.
+ *
+ * <li>  Add the entry data type as a member of the TABLE_ENTRY_DATA union.  Be aware of the size of your
+ *       entry data struct; all table entries in all tables will share any size increase you introduce!
+ *
+ * <li>  If your data entry contains any member types except for UINT32, you can't use the generic first union member
+ *       for the initializers that make up the actual tables (it's just UINT32's). The generic MSR entry is
+ *       an example. Follow the steps below:
+ *
+ *       <ul>
+ *       <li>  Make a union which has your entry data type as the first member.  Use TABLE_ENTRY_DATA as the
+ *             second member.  Name this with your register followed by "_DATA_INITIALIZER".
+ *
+ *       <li>  Make a copy of TABLE_ENTRY_FIELDS, and rename it your register "_TYPE_ENTRY_INITIALIZER".  Rename
+ *             the TABLE_ENTRY_DATA member of that struct to have the type you created in the previous step.
+ *             This type can be used to declare an array of entries and make a register table in some family specific
+ *             file.
+ *       </ul>
+ *
+ * <li>  Add the descriptor that will link table entries of your data type to an implementation for it.
+ *       <ul>
+ *       <li>  Find the options file which instantiates the CPU_SPECIFIC_SERVICES for each logical model that will
+ *             support the new entry type.
+ *
+ *       <li> From there find the instantiation of its TABLE_ENTRY_TYPE_DESCRIPTOR.  Add a descriptor to the
+ *            to the list for your new type.  Provide the name of a function which will implement the
+ *            entry data.  The function name should reflect that it implements the action for the entry type.
+ *            The function must be an instance of F_DO_TABLE_ENTRY.
+ *       </ul>
+ *
+ * <li>  Implement the function for your entry type data.  (If parts of it are family specific add methods to
+ *       CPU_SPECIFIC_SERVICES for that and implement them for each family or model required.)  @n
+ *       The definition of the function must conform to F_DO_TABLE_ENTRY.
+ *       In the function preamble, include a cross reference to the entry enum:
+ *       @code
+ *       *
+ *       * @TableEntryTypeMethod{::MyRegister}
+ *       *
+ *       @endcode
+ *
+ * </ul>
+ *
+ * @par  Adding a new Register Table
+ *
+ * To add a new register table for a logical CPU model follow the steps below.
+ *
+ * <ul>
+ * <li>  Find the options file which instantiates the CPU_SPECIFIC_SERVICES for the logical model that
+ *       should include the table.
+ *
+ * <li>  From there find the instantiation of its REGISTER_TABLE list. Add the name of the new register table.
+ * </ul>
+ *
+ */
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * Define the supported table entries.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * These are the available types of table entries.
+ *
+ * Each type corresponds to:
+ * - a semantics for the type specific data, for example semantics for a Register value,
+ * Data value, and Mask value.
+ * - optionally, including a method for type specific matching criteria
+ * - a method for writing the desired update to the hardware.
+ *
+ * All types share in common a method to match CPU Family and Model and a method to match
+ * platform feature set.
+ *
+ */
+typedef enum {
+  MsrRegister,                 ///< Processor MSR registers.
+  PciRegister,                 ///< Processor Config Space registers.
+  FamSpecificWorkaround,       ///< Processor Family Specific Workarounds which are @b not practical using the other types.
+  HtPhyRegister,               ///< Processor HT Phy registers.
+  HtPhyRangeRegister,          ///< Processor HT Phy range of contiguous registers (ex. 40h:48h).
+  DeemphasisRegister,          ///< Processor Deemphasis register (HT Phy special case).
+  HtPhyFreqRegister,           ///< Processor Frequency dependent HT Phy settings.
+  ProfileFixup,                ///< Processor Performance Profile fixups to PCI Config Registers.
+  HtHostPciRegister,           ///< Processor Ht Host capability registers (PCI Config).
+  HtHostPerfPciRegister,       ///< Processor Ht Host capability registers which depend on performance features.
+  HtTokenPciRegister,          ///< Processor Ht Link Token count registers.
+  CoreCountsPciRegister,       ///< Processor PCI Config Registers which depend on core counts.
+  ProcCountsPciRegister,       ///< Processor PCI Config Registers which depend on processor counts.
+  CompUnitCountsPciRegister,   ///< Processor PCI Config Registers which depend on compute unit counts.
+  TokenPciRegister,            ///< Processor northbridge Token Count register which may be dependent on connectivity.
+  HtFeatPciRegister,           ///< Processor HT Link feature dependant PCI Config Registers.
+  HtPhyProfileRegister,        ///< Processor HT Phy registers which depend on performance features.
+  HtLinkPciRegister,           ///< Processor HT Link registers (one per link) not part of HT Host capability.
+  CompUnitCountsMsr,           ///< Processor MSRs which depend on compute unit counts.
+  TableEntryTypeMax            ///< Not a valid entry type, use for limit checking.
+} TABLE_ENTRY_TYPE;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * Useful types and defines: Selectors, Platform Features, and type specific features.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * Select tables for the current core.
+ *
+ * This allows more efficient register table processing, by allowing cores to skip
+ * redundantly setting PCI registers, for example.  This feature is not intended to
+ * be relied on for function:  it is valid to have a single register table with all settings
+ * processed by every core; it's just slower.
+ *
+ */
+typedef enum {
+  AllCores,                   ///< Select only tables which apply to all cores.
+  CorePairPrimary,            ///< Select tables which apply to the primary core of a compute unit (SharedC, SharedNc).
+  PrimaryCores,               ///< Select tables which apply to primary cores.
+  BscCore,                    ///< Select tables which apply to the boot core.
+  TableCoreSelectorMax        ///< Not a valid selector, use for limit checking.
+} TABLE_CORE_SELECTOR;
+
+// Initializer bit pattern values for platform features.
+// Keep in synch with the PLATFORM_FEATURES struct!
+
+// The 5 control flow modes.
+#define AMD_PF_NFCM           BIT0
+#define AMD_PF_UMA            BIT1    // UMA_DR
+#define AMD_PF_UMA_IFCM       BIT2
+#define AMD_PF_IFCM           BIT3
+#define AMD_PF_IOMMU          BIT4
+// Degree of HT connectivity possible.
+#define AMD_PF_SINGLE_LINK    BIT5
+#define AMD_PF_MULTI_LINK     BIT6
+// For some legacy MSRs, define a couple core count bits.  Do not continue adding
+// core counts to the platform feats, if you need more than this design a table entry type.
+// Here, provide exactly 1, exactly 2, or anything else.
+#define AMD_PF_SINGLE_CORE    BIT7
+#define AMD_PF_DUAL_CORE      BIT8
+#define AMD_PF_MULTI_CORE     BIT9
+
+// Not a platform type, but treat all others as AND
+#define AMD_PF_AND            BIT31
+
+#define AMD_PF_ALL    (AMD_PF_NFCM          | \
+                       AMD_PF_UMA           | \
+                       AMD_PF_UMA_IFCM      | \
+                       AMD_PF_IFCM          | \
+                       AMD_PF_IOMMU         | \
+                       AMD_PF_SINGLE_LINK   | \
+                       AMD_PF_MULTI_LINK    | \
+                       AMD_PF_SINGLE_CORE   | \
+                       AMD_PF_DUAL_CORE     | \
+                       AMD_PF_MULTI_CORE)
+// Do not include AMD_PF_AND in AMD_PF_ALL !
+
+/**
+ * The current platform features.
+ *
+ * Keep this in sync with defines above that are used in the initializers!
+ *
+ * The comments with the bit number are useful for the computing the reserved member size, but
+ * do not write code that assumes you know what bit number one of these members is.
+ *
+ * These platform features are standard for all logical families and models.
+ */
+typedef struct {
+  UINT32          PlatformNfcm:1;             ///< BIT_0 Normal Flow Control Mode.
+  UINT32          PlatformUma:1;              ///< BIT_1 UMA (Display Refresh) Flow Control.
+  UINT32          PlatformUmaIfcm:1;          ///< BIT_2 UMA using Isochronous Flow Control.
+  UINT32          PlatformIfcm:1;             ///< BIT_3 Isochronous Flow Control Mode (not UMA).
+  UINT32          PlatformIommu:1;            ///< BIT_4 IOMMU (a special case Isochronous mode).
+  UINT32          PlatformSingleLink:1;       ///< BIT_5 The processor is in a package which implements only a single HT Link.
+  UINT32          PlatformMultiLink:1;        ///< BIT_6 The processor is in a package which implements more than one HT Link.
+  UINT32          PlatformSingleCore:1;       ///< BIT_7 Single Core processor, for legacy entries.
+  UINT32          PlatformDualCore:1;         ///< BIT_8 Dual Core processor, for legacy entries.
+  UINT32          PlatformMultiCore:1;        ///< BIT_9 More than dual Core processor, for legacy entries.
+  UINT32          :(30 - 9);                  ///< The possibilities are (not quite) endless.
+  UINT32          AndPlatformFeats:1;         ///< BIT_31
+} PLATFORM_FEATURES;
+
+/**
+ * Platform Features
+ */
+typedef union {
+  UINT32            PlatformValue;            ///< Describe Platform Features in UINT32.
+  ///< This one goes first, because then initializers use it automatically for the union.
+  PLATFORM_FEATURES PlatformFeatures;         ///< Describe Platform Features in structure
+} PLATFORM_FEATS;
+
+// Sublink Types are defined so they can match each attribute against either
+// sublink zero or one.  The table entry must contain the correct matching
+// values based on the register. This is available in the BKDG, for each register
+// which sublink it controls.  If the register is independent of sublink, OR values
+// together or use HT_LINKTYPE_ALL to match if either sublink matches (ex. E0 - E5).
+// Sublink 0 types, bits 0 thru 14
+#define HTPHY_LINKTYPE_SL0_HT3          BIT0
+#define HTPHY_LINKTYPE_SL0_HT1          BIT1
+#define HTPHY_LINKTYPE_SL0_COHERENT     BIT2
+#define HTPHY_LINKTYPE_SL0_NONCOHERENT  BIT3
+#define HTPHY_LINKTYPE_SL0_LINK0        BIT4
+#define HTPHY_LINKTYPE_SL0_LINK1        BIT5
+#define HTPHY_LINKTYPE_SL0_LINK2        BIT6
+#define HTPHY_LINKTYPE_SL0_LINK3        BIT7
+#define HTPHY_LINKTYPE_SL0_INTERNAL     BIT8
+#define HTPHY_LINKTYPE_SL0_EXTERNAL     BIT9
+#define HTPHY_LINKTYPE_SL0_AND          BIT15
+
+// SubLink 1 types, bits 16 thru 30
+#define HTPHY_LINKTYPE_SL1_HT3          BIT16
+#define HTPHY_LINKTYPE_SL1_HT1          BIT17
+#define HTPHY_LINKTYPE_SL1_COHERENT     BIT18
+#define HTPHY_LINKTYPE_SL1_NONCOHERENT  BIT19
+#define HTPHY_LINKTYPE_SL1_LINK4        BIT20
+#define HTPHY_LINKTYPE_SL1_LINK5        BIT21
+#define HTPHY_LINKTYPE_SL1_LINK6        BIT22
+#define HTPHY_LINKTYPE_SL1_LINK7        BIT23
+#define HTPHY_LINKTYPE_SL1_INTERNAL     BIT24
+#define HTPHY_LINKTYPE_SL1_EXTERNAL     BIT25
+#define HTPHY_LINKTYPE_SL1_AND          BIT31
+
+#define HTPHY_LINKTYPE_SL0_ALL          (HTPHY_LINKTYPE_SL0_HT3         | \
+                                         HTPHY_LINKTYPE_SL0_HT1         | \
+                                         HTPHY_LINKTYPE_SL0_COHERENT    | \
+                                         HTPHY_LINKTYPE_SL0_NONCOHERENT | \
+                                         HTPHY_LINKTYPE_SL0_LINK0       | \
+                                         HTPHY_LINKTYPE_SL0_LINK1       | \
+                                         HTPHY_LINKTYPE_SL0_LINK2       | \
+                                         HTPHY_LINKTYPE_SL0_LINK3       | \
+                                         HTPHY_LINKTYPE_SL0_INTERNAL    | \
+                                         HTPHY_LINKTYPE_SL0_EXTERNAL)
+#define HTPHY_LINKTYPE_SL1_ALL          (HTPHY_LINKTYPE_SL1_HT3         | \
+                                         HTPHY_LINKTYPE_SL1_HT1         | \
+                                         HTPHY_LINKTYPE_SL1_COHERENT    | \
+                                         HTPHY_LINKTYPE_SL1_NONCOHERENT | \
+                                         HTPHY_LINKTYPE_SL1_LINK4       | \
+                                         HTPHY_LINKTYPE_SL1_LINK5       | \
+                                         HTPHY_LINKTYPE_SL1_LINK6       | \
+                                         HTPHY_LINKTYPE_SL1_LINK7       | \
+                                         HTPHY_LINKTYPE_SL1_INTERNAL    | \
+                                         HTPHY_LINKTYPE_SL1_EXTERNAL)
+#define HTPHY_LINKTYPE_ALL              (HTPHY_LINKTYPE_SL0_ALL | HTPHY_LINKTYPE_SL1_ALL)
+
+#define HTPHY_REGISTER_MAX              0x0000FFFFul
+/**
+ * HT PHY Link Features
+ */
+typedef struct {
+  UINT32 HtPhySL0Ht3:1;                       ///< Ht Phy Sub-link 0 Ht3
+  UINT32 HtPhySL0Ht1:1;                       ///< Ht Phy Sub-link 0 Ht1
+  UINT32 HtPhySL0Coh:1;                       ///< Ht Phy Sub-link 0 Coherent
+  UINT32 HtPhySL0NonCoh:1;                    ///< Ht Phy Sub-link 0 NonCoherent
+  UINT32 HtPhySL0Link0:1;                     ///< Ht Phy Sub-link 0 specifically for node link 0.
+  UINT32 HtPhySL0Link1:1;                     ///< Ht Phy Sub-link 0 specifically for node link 1.
+  UINT32 HtPhySL0Link2:1;                     ///< Ht Phy Sub-link 0 specifically for node link 2.
+  UINT32 HtPhySL0Link3:1;                     ///< Ht Phy Sub-link 0 specifically for node link 3.
+  UINT32 HtPhySL0Internal:1;                  ///< Ht Phy Sub-link 0 is internal link.  Intended for IDS support.
+  UINT32 HtPhySL0External:1;                  ///< Ht Phy Sub-link 0 is external link.  Intended for IDS support.
+  UINT32 :(14 - 9);                           ///< Ht Phy Sub-link 0 Pad
+  UINT32 HtPhySL0And:1;                       ///< Ht Phy feature match should match all selected features, for sub-link 0.
+  UINT32 HtPhySL1Ht3:1;                       ///< Ht Phy Sub-link 1 Ht3
+  UINT32 HtPhySL1Ht1:1;                       ///< Ht Phy Sub-link 1 Ht1
+  UINT32 HtPhySL1Coh:1;                       ///< Ht Phy Sub-link 1 Coherent
+  UINT32 HtPhySL1NonCoh:1;                    ///< Ht Phy Sub-link 1 NonCoherent
+  UINT32 HtPhySL1Link4:1;                     ///< Ht Phy Sub-link 1 specifically for node link 4.
+  UINT32 HtPhySL1Link5:1;                     ///< Ht Phy Sub-link 1 specifically for node link 5.
+  UINT32 HtPhySL1Link6:1;                     ///< Ht Phy Sub-link 1 specifically for node link 6.
+  UINT32 HtPhySL1Link7:1;                     ///< Ht Phy Sub-link 1 specifically for node link 7.
+  UINT32 HtPhySL1Internal:1;                  ///< Ht Phy Sub-link 1 is internal link.  Intended for IDS support.
+  UINT32 HtPhySL1External:1;                  ///< Ht Phy Sub-link 1 is external link.  Intended for IDS support.
+  UINT32 :(30 - 25);                          ///< Ht Phy Sub-link 1 Pad
+  UINT32 HtPhySL1And:1;                       ///< Ht Phy feature match should match all selected features, for sub-link 1.
+} HT_PHY_LINK_FEATURES;
+
+/**
+ * Ht Phy Link Features
+ */
+typedef union {
+  UINT32                  HtPhyLinkValue;     ///< Describe HY Phy Features in UINT32.
+  ///< This one goes first, because then initializers use it automatically for the union.
+  HT_PHY_LINK_FEATURES    HtPhyLinkFeatures;  ///< Describe HT Phy Features in structure.
+} HT_PHY_LINK_FEATS;
+
+// DB Level for initializing Deemphasis
+// This must be in sync with DEEMPHASIS_FEATURES and PLATFORM_DEEMPHASIS_LEVEL (agesa.h)
+#define DEEMPHASIS_LEVEL_NONE   BIT0
+#define DEEMPHASIS_LEVEL__3     BIT1
+#define DEEMPHASIS_LEVEL__6     BIT2
+#define DEEMPHASIS_LEVEL__8     BIT3
+#define DEEMPHASIS_LEVEL__11    BIT4
+#define DEEMPHASIS_LEVEL__11_8  BIT5
+#define DCV_LEVEL_NONE          BIT16
+#define DCV_LEVEL__2            BIT17
+#define DCV_LEVEL__3            BIT18
+#define DCV_LEVEL__5            BIT19
+#define DCV_LEVEL__6            BIT20
+#define DCV_LEVEL__7            BIT21
+#define DCV_LEVEL__8            BIT22
+#define DCV_LEVEL__9            BIT23
+#define DCV_LEVEL__11           BIT24
+// Note that an "AND" feature doesn't make any sense, levels are mutually exclusive.
+
+// An error check value.
+#define DEEMPHASIS_LEVELS_ALL    (DEEMPHASIS_LEVEL_NONE    | \
+                                  DEEMPHASIS_LEVEL__3      | \
+                                  DEEMPHASIS_LEVEL__6      | \
+                                  DEEMPHASIS_LEVEL__8      | \
+                                  DEEMPHASIS_LEVEL__11     | \
+                                  DEEMPHASIS_LEVEL__11_8)
+
+#define DCV_LEVELS_ALL           (DCV_LEVEL_NONE           | \
+                                  DCV_LEVEL__2             | \
+                                  DCV_LEVEL__3             | \
+                                  DCV_LEVEL__5             | \
+                                  DCV_LEVEL__6             | \
+                                  DCV_LEVEL__7             | \
+                                  DCV_LEVEL__8             | \
+                                  DCV_LEVEL__9             | \
+                                  DCV_LEVEL__11)
+
+#define VALID_DEEMPHASIS_LEVELS  (DEEMPHASIS_LEVELS_ALL | DCV_LEVELS_ALL)
+
+/**
+ * Deemphasis Ht Phy Link Deemphasis.
+ *
+ * This must be in sync with defines above and ::PLATFORM_DEEMPHASIS_LEVEL (agesa.h)
+ */
+typedef struct {
+  UINT32          DeemphasisLevelNone:1;         ///< The deemphasis level None.
+  UINT32          DeemphasisLevelMinus3:1;       ///< The deemphasis level minus 3 db.
+  UINT32          DeemphasisLevelMinus6:1;       ///< The deemphasis level minus 6 db.
+  UINT32          DeemphasisLevelMinus8:1;       ///< The deemphasis level minus 8 db.
+  UINT32          DeemphasisLevelMinus11:1;      ///< The deemphasis level minus 11 db.
+  UINT32          DeemphasisLevelMinus11w8:1;    ///< The deemphasis level minus 11 db, minus 8 precursor.
+  UINT32          :(15 - 5);                     ///< reserved.
+  UINT32          DcvLevelNone:1;                ///< The level for DCV None.
+  UINT32          DcvLevelMinus2:1;              ///< The level for DCV minus 2 db.
+  UINT32          DcvLevelMinus3:1;              ///< The level for DCV minus 3 db.
+  UINT32          DcvLevelMinus5:1;              ///< The level for DCV minus 5 db.
+  UINT32          DcvLevelMinus6:1;              ///< The level for DCV minus 6 db.
+  UINT32          DcvLevelMinus7:1;              ///< The level for DCV minus 7 db.
+  UINT32          DcvLevelMinus8:1;              ///< The level for DCV minus 8 db.
+  UINT32          DcvLevelMinus9:1;              ///< The level for DCV minus 9 db.
+  UINT32          DcvLevelMinus11:1;             ///< The level for DCV minus 11 db.
+  UINT32          :(15 - 8);                     ///< reserved.
+} DEEMPHASIS_FEATURES;
+
+/**
+ * Deemphasis Ht Phy Link Features.
+ */
+typedef union {
+  UINT32                  DeemphasisValues;      ///< Initialize HT Deemphasis in UINT32.
+  DEEMPHASIS_FEATURES     DeemphasisLevels;      ///< HT Deemphasis levels.
+} DEEMPHASIS_FEATS;
+
+// Initializer bit patterns for PERFORMANCE_PROFILE_FEATS.
+#define PERFORMANCE_REFRESH_REQUEST_32B       BIT0
+#define PERFORMANCE_PROBEFILTER               BIT1
+#define PERFORMANCE_L3_CACHE                  BIT2
+#define PERFORMANCE_NO_L3_CACHE               BIT3
+#define PERFORMANCE_MCT_ISOC_VARIABLE         BIT4
+#define PERFORMANCE_IS_WARM_RESET             BIT5
+#define PERFORMANCE_VRM_HIGH_SPEED_ENABLE     BIT6
+#define PERFORMANCE_NB_PSTATES_ENABLE         BIT7
+#define PERFORMANCE_AND                       BIT31
+
+#define PERFORMANCE_PROFILE_ALL   (PERFORMANCE_REFRESH_REQUEST_32B | \
+                                   PERFORMANCE_PROBEFILTER         | \
+                                   PERFORMANCE_L3_CACHE            | \
+                                   PERFORMANCE_NO_L3_CACHE         | \
+                                   PERFORMANCE_MCT_ISOC_VARIABLE   | \
+                                   PERFORMANCE_IS_WARM_RESET       | \
+                                   PERFORMANCE_VRM_HIGH_SPEED_ENABLE | \
+                                   PERFORMANCE_NB_PSTATES_ENABLE)
+
+/**
+ * Performance Profile specific Type Features.
+ *
+ * Register settings for the different control flow modes can have additional dependencies
+ */
+typedef struct {
+  UINT32       RefreshRequest32Byte:1;         ///< BIT_0.   Display Refresh Requests use 32 bytes (32BE).
+  UINT32       ProbeFilter:1;                  ///< BIT_1    Probe Filter will be enabled.
+  UINT32       L3Cache:1;                      ///< BIT_2    L3 Cache is present.
+  UINT32       NoL3Cache:1;                    ///< BIT_3    L3 Cache is NOT present.
+  UINT32       MctIsocVariable:1;              ///< BIT_4    Mct Isoc Read Priority set to variable.
+  UINT32       IsWarmReset:1;                  ///< BIT_5    This boot is on a warm reset, cold reset pass is already completed.
+  UINT32       VrmHighSpeed:1;                 ///< BIT_6    Select high speed VRM.
+  UINT32       NbPstates:1;                    ///< BIT_7    Northbridge PStates are enabled
+  UINT32       :(30 - 7);                      ///< available for future expansion.
+  UINT32       AndPerformanceFeats:1;          ///< BIT_31.  AND other selected features.
+} PERFORMANCE_PROFILE_FEATURES;
+
+/**
+ * Performance Profile features.
+ */
+typedef union {
+  UINT32                        PerformanceProfileValue;     ///< Initializer value.
+  PERFORMANCE_PROFILE_FEATURES  PerformanceProfileFeatures;  ///< The performance profile features.
+} PERFORMANCE_PROFILE_FEATS;
+
+/**
+ * Package Type Features
+ *
+ */
+typedef struct {
+  UINT32        PkgType0:1;                 ///< Package Type 0
+  UINT32        PkgType1:1;                 ///< Package Type 1
+  UINT32        PkgType2:1;                 ///< Package Type 2
+  UINT32        PkgType3:1;                 ///< Package Type 3
+  UINT32        PkgType4:1;                 ///< Package Type 4
+  UINT32        PkgType5:1;                 ///< Package Type 5
+  UINT32        PkgType6:1;                 ///< Package Type 6
+  UINT32        PkgType7:1;                 ///< Package Type 7
+  UINT32        PkgType8:1;                 ///< Package Type 8
+  UINT32        PkgType9:1;                 ///< Package Type 9
+  UINT32        PkgType10:1;                ///< Package Type 10
+  UINT32        PkgType11:1;                ///< Package Type 11
+  UINT32        PkgType12:1;                ///< Package Type 12
+  UINT32        PkgType13:1;                ///< Package Type 13
+  UINT32        PkgType14:1;                ///< Package Type 14
+  UINT32        PkgType15:1;                ///< Package Type 15
+  UINT32        Reserved:15;                ///< Package Type Reserved
+  UINT32        ReservedAndFeats:1;         ///< BIT_31.  AND other selected features. Always zero here.
+} PACKAGE_TYPE_FEATURES;
+
+// Initializer Values for Package Type
+#define PACKAGE_TYPE_ALL              0XFFFF       ///< Package Type apply all packages
+
+// Initializer Values for Ht Host Pci Config Registers
+#define HT_HOST_FEAT_COHERENT          BIT0
+#define HT_HOST_FEAT_NONCOHERENT       BIT1
+#define HT_HOST_FEAT_GANGED            BIT2
+#define HT_HOST_FEAT_UNGANGED          BIT3
+#define HT_HOST_FEAT_HT3               BIT4
+#define HT_HOST_FEAT_HT1               BIT5
+#define HT_HOST_AND                    BIT31
+
+#define HT_HOST_FEATURES_ALL    (HT_HOST_FEAT_COHERENT    | \
+                                 HT_HOST_FEAT_NONCOHERENT | \
+                                 HT_HOST_FEAT_GANGED      | \
+                                 HT_HOST_FEAT_UNGANGED    | \
+                                 HT_HOST_FEAT_HT3         | \
+                                 HT_HOST_FEAT_HT1)
+
+/**
+ * HT Host PCI register features.
+ *
+ * Links which are not connected do not match any of these features.
+ */
+typedef struct {
+  UINT32       Coherent:1;                 ///< BIT_0 Apply to links with a coherent connection.
+  UINT32       NonCoherent:1;              ///< BIT_1 Apply to links with a non-coherent connection.
+  UINT32       Ganged:1;                   ///< BIT_2 Apply to links with a ganged connection.
+  UINT32       UnGanged:1;                 ///< BIT_3 Apply to links with a unganged connection.
+  UINT32       Ht3:1;                      ///< BIT_4 Apply to links with HT3 frequency (> 1000 MHz)
+  UINT32       Ht1:1;                      ///< BIT_5 Apply to links with HT1 frequency (< 1200 MHz)
+  UINT32       :(30 - 5);                  ///< Future expansion.
+  UINT32       AndHtHostFeats:1;           ///< BIT_31.  AND other selected features.
+} HT_HOST_FEATURES;
+
+/**
+ * HT Host features for table data.
+ */
+typedef union {
+  UINT32                 HtHostValue;                ///< Initializer value.
+  HT_HOST_FEATURES       HtHostFeatures;             ///< The HT Host Features.
+} HT_HOST_FEATS;
+
+// Core Range Initializer values.
+#define COUNT_RANGE_LOW            0ul
+#define COUNT_RANGE_HIGH           0xFFul
+
+// A count range matching none is often useful as the second range, matching will then be
+// based on the first range.  A count range all is provided as a first range for default settings.
+#define COUNT_RANGE_NONE           ((((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_HIGH)) << 16)
+#define COUNT_RANGE_ALL            (((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_LOW))
+#define IGNORE_FREQ_0              (((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_HIGH))
+#define IGNORE_PROCESSOR_0         (((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_HIGH))
+
+#define CORE_RANGE_0(min, max)            ((((UINT32)(max)) << 8) | (UINT32)(min))
+#define CORE_RANGE_1(min, max)            (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16)
+#define PROCESSOR_RANGE_0(min, max)       ((((UINT32)(max)) << 8) | (UINT32)(min))
+#define PROCESSOR_RANGE_1(min, max)       (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16)
+#define DEGREE_RANGE_0(min, max)          ((((UINT32)(max)) << 8) | (UINT32)(min))
+#define DEGREE_RANGE_1(min, max)          (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16)
+#define FREQ_RANGE_0(min, max)            ((((UINT32)(max)) << 8) | (UINT32)(min))
+#define FREQ_RANGE_1(min, max)            (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16)
+#define COMPUTE_UNIT_RANGE_0(min, max)    ((((UINT32)(max)) << 8) | (UINT32)(min))
+#define COMPUTE_UNIT_RANGE_1(min, max)    (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16)
+
+/**
+ * Count Range Feature, two count ranges for core counts, processor counts, or node counts.
+ */
+typedef struct {
+  UINT32       Range0Min:8;           ///< The minimum of the first count range.
+  UINT32       Range0Max:8;           ///< The maximum of the first count range.
+  UINT32       Range1Min:8;           ///< The minimum of the second count range.
+  UINT32       Range1Max:8;           ///< The maximum of the second count range.
+} COUNT_RANGE_FEATURE;
+
+/**
+ * Core Count Ranges for table data.
+ *
+ * Provide a pair of core count ranges. If the actual core count is included in either range (OR),
+ * the feature should be considered a match.
+ */
+typedef union {
+  UINT32       CoreRangeValue;          ///< Initializer value.
+  COUNT_RANGE_FEATURE CoreRanges;       ///< The Core Counts.
+} CORE_COUNT_RANGES;
+
+/**
+ * Processor count ranges for table data.
+ *
+ * Provide a pair of processor count ranges.  If the actual counts are included in either range (OR),
+ * the feature should be considered a match.
+ */
+typedef union {
+  UINT32       ProcessorCountRangeValue;             ///< Initializer value.
+  COUNT_RANGE_FEATURE ProcessorCountRanges;          ///< The Processor and Node Counts.
+} PROCESSOR_COUNTS;
+
+/**
+ * Compute unit count ranges for table data.
+ *
+ * Provide a pair of compute unit count ranges. If the actual counts are included in either ranges (OR),
+ * the feature should be considered a match.
+ */
+typedef union {
+  UINT32    ComputeUnitRangeValue;                ///< Initializer value.
+  COUNT_RANGE_FEATURE ComputeUnitRanges;          ///< The Processor and Node Counts.
+} COMPUTE_UNIT_COUNTS;
+
+/**
+ * Connectivity count ranges for table data.
+ *
+ * Provide a processor count range and a system degree range.  The degree of a system is
+ * the maximum degree of any node.  The degree of a node is the number of nodes to which
+ * it is directly connected (not considering width or redundant links). If both the actual
+ * counts are included in each range (AND), the feature should be considered a match.
+ */
+typedef union {
+  UINT32       ConnectivityCountRangeValue;             ///< Initializer value.
+  COUNT_RANGE_FEATURE ConnectivityCountRanges;          ///< The Processor and Degree Counts.
+} CONNECTIVITY_COUNT;
+
+/**
+ * HT Frequency Count Range.
+ *
+ * Provide a pair of Frequency count ranges, with the frequency encoded as an HT Frequency value
+ * (such as would be programmed into the HT Host Link Frequency register).  By converting a NB freq,
+ * the same count can be applied for it.  If the actual value is included in either range
+ */
+typedef union {
+  UINT32       HtFreqCountRangeValue;                  ///< Initializer value.
+  COUNT_RANGE_FEATURE HtFreqCountRanges;               ///< The HT Freq counts.
+} HT_FREQ_COUNTS;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * The specific data for each table entry.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ *  Make an extra type so we can use compilers that don't support designated initializers.
+ *
+ *  All the entry type unions are no more than 5 UINT32's in size.  For entry types which are a struct of UINT32's,
+ *  this type can be used so that initializers can be declared TABLE_ENTRY_FIELDS, instead of a special non-union type.
+ *  A non-union type then has to be cast back to TABLE_ENTRY_FIELDS in order to process the table, and you can't mix
+ *  entry types with non-union initializers in the same table with any other type.
+ *
+ *  If the entry type contains anything but UINT32's, then it must have a non-union initializer type for creating the
+ *  actual tables.  For example, MSR entry has UINT64 and workaround entry has a function pointer.
+ */
+typedef UINT32 GENERIC_TYPE_ENTRY_INITIALIZER[MAX_ENTRY_TYPE_ITEMS32];
+
+/**
+ * Table Entry Data for MSR Registers.
+ *
+ * Apply data to register after mask, for MSRs.
+ */
+typedef struct {
+  UINT32  Address;                    ///< MSR address
+  UINT64  Data;                       ///< Data to set in the MSR
+  UINT64  Mask;                       ///< Mask to be applied to the MSR. Set every bit of all updated fields.
+} MSR_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for PCI Registers.
+ *
+ * Apply data to register after mask, for PCI Config registers.
+ */
+typedef struct {
+  PCI_ADDR  Address;                  ///< Address should contain Function, Offset only.  It will apply to all CPUs
+  UINT32    Data;                     ///< Data to be written into PCI device
+  UINT32    Mask;                     ///< Mask to be used before data write. Set every bit of all updated fields.
+} PCI_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for HT Phy Registers.
+ *
+ * Apply data to register after mask, for HT Phy registers, repeated for all active links.
+ */
+typedef struct {
+  HT_PHY_LINK_FEATS TypeFeats;        ///< HT Phy Link Features
+  UINT32            Address;          ///< Address of Ht Phy Register
+  UINT32            Data;             ///< Data to be written into PCI device
+  UINT32            Mask;             ///< Mask to be used before data write.  Set every bit of all updated fields.
+} HT_PHY_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for HT Phy Register Ranges.
+ *
+ * Apply data to register after mask, for a range of HT Phy registers, repeated for all active links.
+ */
+typedef struct {
+  HT_PHY_LINK_FEATS TypeFeats;        ///< HT Phy Link Features
+  UINT32            LowAddress;       ///< Low address of Ht Phy Register range.
+  UINT32            HighAddress;      ///< High address of register range.
+  UINT32            Data;             ///< Data to be written into PCI device.
+  UINT32            Mask;             ///< Mask to be used before data write.  Set every bit of all updated fields.
+} HT_PHY_RANGE_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for HT Phy Deemphasis Registers.
+ *
+ * Apply data to register after mask, for HT Phy registers, repeated for all active links.
+ */
+typedef struct {
+  DEEMPHASIS_FEATS        Levels;       ///< The DCV and Deemphasis levels to match
+  HT_PHY_TYPE_ENTRY_DATA  HtPhyEntry;   ///< The HT Phy Entry to set the deemphasis values
+} DEEMPHASIS_HT_PHY_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Date for HT Phy Frequency Count Register updates.
+ *
+ * Compare the NB freq to a range, the HT freq to a range, the link features.
+ * Apply data to register after mask, if all three matched.
+ */
+typedef struct {
+  HT_FREQ_COUNTS       HtFreqCounts;      ///< Specify the HT Frequency range.
+  HT_FREQ_COUNTS       NbFreqCounts;      ///< Specify the NB Frequency range.
+  HT_PHY_TYPE_ENTRY_DATA HtPhyEntry;      ///< The HT Phy register update to perform.
+} HT_PHY_FREQ_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for Profile Fixup Registers.
+ *
+ * If TypeFeats matches current config, apply data to register after mask for PCI Config registers.
+ */
+typedef struct {
+  PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features.
+  PCI_TYPE_ENTRY_DATA PciEntry;        ///< The PCI Register entry data.
+} PROFILE_FIXUP_TYPE_ENTRY_DATA;
+
+/**
+ * A variation of PCI register for the HT Host registers.
+ *
+ * A setting to the HT Host buffer counts needs to be made to all the registers for
+ * all the links.  There are also link specific criteria to check.
+ */
+typedef struct {
+  HT_HOST_FEATS     TypeFeats;        ///< Link Features.
+  PCI_ADDR          Address;          ///< Address of PCI Register to Fixed Up.
+  UINT32            Data;             ///< Data to be written into PCI device
+  UINT32            Mask;             ///< Mask to be used before data write.  Set every bit of all updated fields.
+} HT_HOST_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * A variation of PCI register for the HT Host performance registers.
+ *
+ * A setting to the HT Host buffer counts needs to be made to all the registers for
+ * all the links.  There are also link specific criteria to check.
+ */
+typedef struct {
+  PERFORMANCE_PROFILE_FEATS   PerformanceFeats;    ///< Performance Profile features.
+  HT_HOST_PCI_TYPE_ENTRY_DATA HtHostEntry;         ///< Link Features.
+} HT_HOST_PERFORMANCE_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * A variation of HT Host PCI register for the Link Token registers.
+ *
+ * Use Link Features, Performance Fixup features, and processor counts to match entries.
+ * Link Features are iterated through the connected links.  All the matching Link Token count
+ * registers are updated.
+ */
+typedef struct {
+  CONNECTIVITY_COUNT          ConnectivityCount;   ///< Specify Processor count and Degree count range.
+  PERFORMANCE_PROFILE_FEATS   PerformanceFeats;    ///< Performance Profile features.
+  HT_HOST_FEATS               LinkFeats;           ///< Link Features.
+  PCI_ADDR                    Address;             ///< Address of PCI Register to Fixed Up.
+  UINT32                      Data;                ///< Data to be written into PCI device
+  UINT32                      Mask;                ///< Mask to be used before data write. Set every bit of all updated fields.
+} HT_TOKEN_PCI_REGISTER;
+
+/**
+ * Core Count dependent PCI registers.
+ *
+ */
+typedef struct {
+  PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features.
+  CORE_COUNT_RANGES CoreCounts;        ///< Specify up to two core count ranges to match.
+  PCI_TYPE_ENTRY_DATA PciEntry;        ///< The PCI Register entry data.
+} CORE_COUNTS_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * Processor Count dependent PCI registers.
+ *
+ */
+typedef struct {
+  PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features.
+  PROCESSOR_COUNTS  ProcessorCounts;   ///< Specify a processor count range.
+  PCI_TYPE_ENTRY_DATA PciEntry;        ///< The PCI Register entry data.
+} PROCESSOR_COUNTS_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * Compute Unit Count dependent PCI registers.
+ *
+ */
+typedef struct {
+  PERFORMANCE_PROFILE_FEATS TypeFeats;         ///< Profile Fixup Features.
+  COMPUTE_UNIT_COUNTS       ComputeUnitCounts; ///< Specify a compute unit count range.
+  PCI_TYPE_ENTRY_DATA       PciEntry;          ///< The PCI Register entry data.
+} COMPUTE_UNIT_COUNTS_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * Compute Unit Count dependent MSR registers.
+ *
+ */
+typedef struct {
+  COMPUTE_UNIT_COUNTS       ComputeUnitCounts; ///< Specify a compute unit count range.
+  MSR_TYPE_ENTRY_DATA       MsrEntry;          ///< The MSR Register entry data.
+} COMPUTE_UNIT_COUNTS_MSR_TYPE_ENTRY_DATA;
+
+/**
+ * Package Type Features
+ *
+ * FamilyPackageType are various among CPU families.
+ *
+ */
+typedef union {
+  UINT32                      PackageTypeValue;    ///< Package Type
+  PACKAGE_TYPE_FEATURES       FamilyPackageType;   ///< Package Type of CPU family
+} PACKAGE_TYPE_FEATS;
+
+/**
+ * System connectivity dependent PCI registers.
+ *
+ * The topology specific recommended settings are based on the different connectivity of nodes
+ * in each configuration:  the more connections, the fewer resources each connection gets.
+ * The connectivity criteria translate as:
+ * - 2 Socket, half populated  ==   Degree 1
+ * - 4 Socket, half populated   ==  Degree 2
+ * - 2 Socket, fully populated  ==  Degree 3
+ * - 4 Socket, fully populated  ==  Degree > 3.  (4 or 5 if 3P, 6 if 4P)
+ *
+ */
+typedef struct {
+  PERFORMANCE_PROFILE_FEATS TypeFeats;     ///< Profile Fixup Features.
+  CONNECTIVITY_COUNT  ConnectivityCount;   ///< Specify a system degree range.
+  PACKAGE_TYPE_FEATS  PackageType;         ///< Package Type
+  PCI_TYPE_ENTRY_DATA PciEntry;            ///< The PCI Register entry data.
+} CONNECTIVITY_COUNTS_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * A Family Specific Workaround method.
+ *
+ * \@TableTypeFamSpecificInstances.
+ *
+ * When called, the entry's CPU Logical ID and Platform Features matched the current config.
+ * The method must implement any specific criteria checking for the workaround.
+ *
+ * See if you can use the other entries or make an entry specifically for the fix.
+ * After all, the purpose of having a table entry is to @b NOT have code which
+ * isn't generic feature code, but is family/model specific.
+ *
+ * @param[in]     Data       The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in]     StdHeader  Config params for library, services.
+ */
+typedef VOID F_FAM_SPECIFIC_WORKAROUND (
+  IN       UINT32              Data,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+/// Reference to a method.
+typedef F_FAM_SPECIFIC_WORKAROUND *PF_FAM_SPECIFIC_WORKAROUND;
+
+/**
+ * Table Entry Data for Family Specific Workarounds.
+ *
+ * See if you can use the other entries or make an entry specifically for the fix.
+ * After all, the purpose of having a table entry is to @b NOT have code which
+ * isn't generic feature code, but is family/model specific.
+ *
+ * Call DoAction passing Data.
+ */
+typedef struct {
+  PF_FAM_SPECIFIC_WORKAROUND  DoAction;     ///< A function implementing the workaround.
+  UINT32                Data;               ///< This data is passed to DoAction().
+} FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_DATA;
+
+/**
+ * HT Features dependent Global PCI registers.
+ *
+ */
+typedef struct {
+  HT_HOST_FEATS               LinkFeats;           ///< Link Features.
+  PACKAGE_TYPE_FEATS          PackageType;         ///< Package Type
+  PCI_TYPE_ENTRY_DATA         PciEntry;            ///< The PCI Register entry data.
+} HT_FEATURES_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for HT Phy Registers which depend on performance profile features.
+ *
+ * Match performance profile features and link features.
+ * Apply data to register after mask, for HT Phy registers, repeated for all active links.
+ */
+typedef struct {
+  PERFORMANCE_PROFILE_FEATS  TypeFeats;            ///< Profile Fixup Features.
+  HT_PHY_TYPE_ENTRY_DATA     HtPhyEntry;           ///< The HT Phy Entry to set the deemphasis values
+} PROFILE_HT_PHY_TYPE_ENTRY_DATA;
+
+/**
+ * HT Link PCI registers that are not in the HT Host capability.
+ *
+ * Some HT Link registers have an instance per link, but are just sequential.  Specify the base register
+ * in the table register address (link 0 sublink 0).
+ */
+typedef struct {
+  HT_HOST_FEATS               LinkFeats;           ///< Link Features.
+  PCI_TYPE_ENTRY_DATA         PciEntry;            ///< The PCI Register entry data.
+} HT_LINK_PCI_TYPE_ENTRY_DATA;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * A complete register table and table entries.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * All the available entry data types.
+ */
+typedef union {
+  GENERIC_TYPE_ENTRY_INITIALIZER          InitialValues;         ///< Not a valid entry type; as the first union item,
+                                                                 ///< it can be used with initializers.
+  MSR_TYPE_ENTRY_DATA                     MsrEntry;              ///< Msr entry.
+  PCI_TYPE_ENTRY_DATA                     PciEntry;              ///< PCI entry.
+  FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_DATA FamSpecificEntry;      ///< Family Specific Workaround entry.
+  HT_PHY_TYPE_ENTRY_DATA                  HtPhyEntry;            ///< HT Phy entry.
+  HT_PHY_RANGE_TYPE_ENTRY_DATA            HtPhyRangeEntry;       ///< A range of Ht Phy Registers
+  DEEMPHASIS_HT_PHY_TYPE_ENTRY_DATA       DeemphasisEntry;       ///< A HT Deemphasis level's settings.
+  HT_PHY_FREQ_TYPE_ENTRY_DATA             HtPhyFreqEntry;        ///< A frequency dependent Ht Phy Register setting.
+  PROFILE_FIXUP_TYPE_ENTRY_DATA           FixupEntry;            ///< Profile Fixup entry.
+  HT_HOST_PCI_TYPE_ENTRY_DATA             HtHostEntry;           ///< HT Host PCI entry.
+  HT_HOST_PERFORMANCE_PCI_TYPE_ENTRY_DATA HtHostPerfEntry;       ///< HT Host Performance PCI entry
+  HT_TOKEN_PCI_REGISTER                   HtTokenEntry;          ///< HT Link Token Count entry.
+  CORE_COUNTS_PCI_TYPE_ENTRY_DATA         CoreCountEntry;        ///< Core count dependent settings.
+  PROCESSOR_COUNTS_PCI_TYPE_ENTRY_DATA    ProcCountEntry;        ///< Processor count entry.
+  COMPUTE_UNIT_COUNTS_PCI_TYPE_ENTRY_DATA CompUnitCountEntry;    ///< Compute unit count dependent entry.
+  CONNECTIVITY_COUNTS_PCI_TYPE_ENTRY_DATA TokenPciEntry;         ///< System connectivity dependent Token register.
+  HT_FEATURES_PCI_TYPE_ENTRY_DATA         HtFeatPciEntry;        ///< HT Features PCI entry.
+  PROFILE_HT_PHY_TYPE_ENTRY_DATA          HtPhyProfileEntry;     ///< Performance dependent HT Phy register.
+  HT_LINK_PCI_TYPE_ENTRY_DATA             HtLinkPciEntry;        ///< Per Link, non HT Host, PCI registers.
+  COMPUTE_UNIT_COUNTS_MSR_TYPE_ENTRY_DATA CompUnitCountMsrEntry; ///< Compute unit count dependent MSR entry.
+} TABLE_ENTRY_DATA;
+
+/**
+ * Register Table Entry common fields.
+ *
+ * All the various types of register table entries are subclasses of this object.
+ */
+typedef struct {
+  TABLE_ENTRY_TYPE       EntryType;                  ///< The type of table entry this is.
+  CPU_LOGICAL_ID         CpuRevision;                ///< Common CPU Logical ID match criteria.
+  PLATFORM_FEATS         Features;                   ///< Common Platform Features match criteria.
+  TABLE_ENTRY_DATA       Entry;                      ///< The type dependent entry data (ex. register, data, mask).
+} TABLE_ENTRY_FIELDS;
+
+/**
+ * An entire register table.
+ */
+typedef struct {
+  TABLE_CORE_SELECTOR  Selector;                     ///< For efficiency, these cores should process this table
+  UINTN                NumberOfEntries;              ///< The number of entries in the table.
+  CONST TABLE_ENTRY_FIELDS  *Table;                  ///< The table entries.
+} REGISTER_TABLE;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * Describe implementers for table entries.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * Implement the semantics of a Table Entry Type.
+ *
+ * @TableEntryTypeInstances.
+ *
+ * @param[in]       CurrentEntry        The type specific entry data to be implemented (that is written).
+ * @param[in]       PlatformConfig      Config handle for platform specific information
+ * @param[in]       StdHeader           Config params for library, services.
+ */
+typedef VOID F_DO_TABLE_ENTRY (
+  IN       TABLE_ENTRY_DATA       *CurrentEntry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+/// Reference to a method
+typedef F_DO_TABLE_ENTRY *PF_DO_TABLE_ENTRY;
+
+/**
+ * Describe the attributes of a Table Entry Type.
+ */
+typedef struct {
+  TABLE_ENTRY_TYPE       EntryType;                  ///< The type of table entry this describes.
+  PF_DO_TABLE_ENTRY      DoTableEntry;               ///< Provide all semantics associated with TABLE_ENTRY_DATA
+} TABLE_ENTRY_TYPE_DESCRIPTOR;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * Non-union initializers for entry data which is not just UINT32.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * A union of data types, that can be initialized with MSR data.
+ *
+ * This ensures the entry data is the same size as TABLE_ENTRY_DATA.
+ */
+typedef union {
+  MSR_TYPE_ENTRY_DATA    MsrInitializer;            ///< The data in the table initializer is assigned to this member.
+  TABLE_ENTRY_DATA       Reserved;                  ///< Make sure the size is the same as the real union.
+} MSR_DATA_INITIALIZER;
+
+/**
+ * A type suitable for an initializer for MSR Table entries.
+ */
+typedef struct {
+  TABLE_ENTRY_TYPE       Type;                       ///< The type of table entry this is.
+  CPU_LOGICAL_ID         CpuRevision;                ///< Common CPU Logical ID match criteria.
+  PLATFORM_FEATS         Features;                   ///< Common Platform Features match criteria.
+  MSR_DATA_INITIALIZER    EntryData;                 ///< The special union which accepts msr data initializer.
+} MSR_TYPE_ENTRY_INITIALIZER;
+
+/**
+ * A union of data types, that can be initialized with MSR CU data.
+ *
+ * This ensures the entry data is the same size as TABLE_ENTRY_DATA.
+ */
+typedef union {
+  COMPUTE_UNIT_COUNTS_MSR_TYPE_ENTRY_DATA  MsrInitializer;  ///< The data in the table initializer is assigned to this member.
+  TABLE_ENTRY_DATA       Reserved;                          ///< Make sure the size is the same as the real union.
+} MSR_CU_DATA_INITIALIZER;
+
+/**
+ * A type suitable for an initializer for MSR CU count Table entries.
+ */
+typedef struct {
+  TABLE_ENTRY_TYPE           Type;                   ///< The type of table entry this is.
+  CPU_LOGICAL_ID             CpuRevision;            ///< Common CPU Logical ID match criteria.
+  PLATFORM_FEATS             Features;               ///< Common Platform Features match criteria.
+  MSR_CU_DATA_INITIALIZER    EntryData;              ///< The special union which accepts msr data initializer.
+} MSR_CU_TYPE_ENTRY_INITIALIZER;
+
+/**
+ * A union of data types, that can be initialized with Family Specific Workaround data.
+ *
+ * This ensures the entry data is the same size as TABLE_ENTRY_DATA.
+ */
+typedef union {
+  FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_DATA    FamSpecificInitializer; ///< The data in the table initializer is assigned to this member.
+  TABLE_ENTRY_DATA       Reserved;                                   ///< Make sure the size is the same as the real union.
+} FAM_SPECIFIC_WORKAROUND_DATA_INITIALIZER;
+
+/**
+ * A type suitable for an initializer for Family Specific Workaround Table entries.
+ */
+typedef struct {
+  TABLE_ENTRY_TYPE       Type;                             ///< The type of table entry this is.
+  CPU_LOGICAL_ID         CpuRevision;                      ///< Common CPU Logical ID match criteria.
+  PLATFORM_FEATS         Features;                         ///< Common Platform Features match criteria.
+  FAM_SPECIFIC_WORKAROUND_DATA_INITIALIZER    EntryData;   ///< Special union accepts family specific workaround data initializer.
+} FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * Table related function prototypes (many are instance of F_DO_TABLE_ENTRY method).
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * Set the registers for this core based on entries in a list of Register Tables.
+ */
+VOID SetRegistersFromTables (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Find the features of the running platform.
+ */
+VOID
+GetPlatformFeatures (
+     OUT   PLATFORM_FEATS    *Features,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * Checks register table entry type specific criteria to the platform.
+ */
+BOOLEAN
+DoesEntryTypeSpecificInfoMatch (
+  IN       UINT32   PlatformTypeSpecificFeatures,
+  IN       UINT32   EntryTypeFeatures
+  );
+
+/**
+ * Perform the MSR Register Entry.
+ */
+VOID
+SetRegisterForMsrEntry (
+  IN       TABLE_ENTRY_DATA      *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+/**
+ * Perform the PCI Register Entry.
+ */
+VOID
+SetRegisterForPciEntry (
+  IN       TABLE_ENTRY_DATA      *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+/**
+ * Perform the Performance Profile PCI Register Entry.
+ */
+VOID
+SetRegisterForPerformanceProfileEntry (
+  IN       TABLE_ENTRY_DATA      *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+/**
+ * Perform the HT Host PCI Register Entry.
+ */
+VOID
+SetRegisterForHtHostEntry (
+  IN       TABLE_ENTRY_DATA      *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+/**
+ * Perform the HT Host Performance PCI Register Entry.
+ */
+VOID
+SetRegisterForHtHostPerfEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Set the HT Link Token Count registers.
+ */
+VOID
+SetRegisterForHtLinkTokenEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Perform the Core Counts Performance PCI Register Entry.
+ */
+VOID
+SetRegisterForCoreCountsPerformanceEntry (
+  IN       TABLE_ENTRY_DATA      *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+/**
+ * Perform the Processor Counts PCI Register Entry.
+ */
+VOID
+SetRegisterForProcessorCountsEntry (
+  IN       TABLE_ENTRY_DATA      *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+/**
+ * Perform the Compute Unit Counts PCI Register Entry.
+ */
+VOID
+SetRegisterForComputeUnitCountsEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Perform the Compute Unit Counts MSR Register Entry.
+ */
+VOID
+SetMsrForComputeUnitCountsEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Perform the Family Specific Workaround Register Entry.
+ */
+VOID
+SetRegisterForFamSpecificWorkaroundEntry (
+  IN       TABLE_ENTRY_DATA      *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+/**
+ * Program HT Phy PCI registers.
+ */
+VOID
+SetRegisterForHtPhyEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Program a range of HT Phy PCI registers.
+ */
+VOID
+SetRegisterForHtPhyRangeEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Program Deemphasis registers, for the platform specified levels.
+ */
+VOID
+SetRegisterForDeemphasisEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Program HT Phy PCI registers which have complex frequency dependencies.
+ */
+VOID
+SetRegisterForHtPhyFreqEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Perform the Processor Token Counts PCI Register Entry.
+ */
+VOID
+SetRegisterForTokenPciEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Perform the HT Link Feature PCI Register Entry.
+ */
+VOID
+SetRegisterForHtFeaturePciEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Perform the HT Phy Performance Profile Register Entry.
+ */
+VOID
+SetRegisterForHtPhyProfileEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Perform the HT Link PCI Register Entry.
+ */
+VOID
+SetRegisterForHtLinkPciEntry (
+  IN       TABLE_ENTRY_DATA       *Entry,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Compare counts to a pair of ranges.
+ */
+BOOLEAN
+IsEitherCountInRange (
+  IN       UINTN                FirstCount,
+  IN       UINTN                SecondCount,
+  IN       COUNT_RANGE_FEATURE  Ranges
+  );
+
+/**
+ * Returns the performance profile features list of the currently running processor core.
+ */
+VOID
+GetPerformanceFeatures (
+     OUT   PERFORMANCE_PROFILE_FEATS    *Features,
+  IN       PLATFORM_CONFIGURATION       *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS            *StdHeader
+  );
+
+#endif  // _CPU_TABLE_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt.asm b/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt.asm
new file mode 100644
index 0000000000..1ce62cdb4d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt.asm
@@ -0,0 +1,362 @@
+;/**
+; * @file
+; *
+; * Agesa pre-memory miscellaneous support, including ap halt loop.
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  CPU
+; * @e \$Revision: 47763 $   @e \$Date: 2011-02-27 18:11:57 -0700 (Sun, 27 Feb 2011) $
+; */
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+
+    .XLIST
+    INCLUDE agesa.inc
+    INCLUDE cpcarmac.inc
+    .LIST
+
+    .586P
+
+;===============================================
+;===============================================
+;==
+;== M E M O R Y   A B S E N T   S E G M E N T
+;==
+;===============================================
+;===============================================
+    .MODEL flat
+    .CODE
+;======================================================================
+; ExecuteFinalHltInstruction:  Disables the stack and performs
+;                              a hlt instruction on an AP.
+;
+;   In:
+;       None
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       eax, ebx, ecx, edx, esp
+;
+;======================================================================
+PUBLIC ExecuteFinalHltInstruction
+ExecuteFinalHltInstruction PROC NEAR C USES ESI EDI HaltFlags:DWORD, ApMtrrSettingList:PTR, StandardHeader:PTR
+
+  mov esi,  StandardHeader        ; The code must reference all parameters to avoid a build warning
+  mov esi,  HaltFlags
+  mov edi,  ApMtrrSettingList
+  ; Do these special steps in case if the core is part of a compute unit
+  ; Note: The following bits are family specific flags, that gets set during build time,
+  ;          and indicates things like "family cache control methodology", etc.
+  ; esi bit0 = 0  -> not a Primary core
+  ; esi bit0 = 1  -> Primary core
+  ; esi bit1 = 0  -> Cache disable
+  ; esi bit1 = 1  -> Cache enable
+  .if (esi & 2h)
+    ; Set CombineCr0Cd bit
+    mov ecx,  CU_CFG3
+    _RDMSR
+    bts edx,  (COMBINE_CR0_CD - 32)
+    _WRMSR
+    ; Clear the CR0.CD bit
+    mov eax,  CR0                 ; Make sure cache is enabled for all APs
+    btr eax,  CR0_CD
+    btr eax,  CR0_NW
+    mov CR0,  eax                 ; Write back to CR0
+  .else
+    mov eax,  CR0                 ; Make sure cache is disabled for all APs
+    bts eax,  CR0_CD              ; Disable cache
+    bts eax,  CR0_NW
+    mov CR0,  eax                 ; Write back to CR0
+  .endif
+
+  .if (esi & 1h)
+    ; This core is a primary core and needs to do all the MTRRs, including shared MTRRs.
+    mov esi,  edi                 ; Get ApMtrrSettingList
+
+    ; Configure the MTRRs on the AP so
+    ; when it runs remote code it will execute
+    ; out of RAM instead of ROM.
+
+    ; Disable MTRRs and turn on modification enable bit
+    mov ecx,  MTRR_SYS_CFG
+    _RDMSR
+    btr eax,  MTRR_VAR_DRAM_EN     ; Disable
+    bts eax,  MTRR_FIX_DRAM_MOD_EN  ;  Enable
+    btr eax,  MTRR_FIX_DRAM_EN     ; Disable
+    bts eax,  SYS_UC_LOCK_EN
+    _WRMSR
+
+    ; Setup default values for Fixed-Sized MTRRs
+    ; Set 7FFFh-00000h as WB
+    mov ecx,  AMD_AP_MTRR_FIX64k_00000
+    mov eax,  1E1E1E1Eh
+    mov edx,  eax
+    _WRMSR
+
+    ; Set 9FFFFh-80000h also as WB
+    mov ecx,  AMD_AP_MTRR_FIX16k_80000
+    _WRMSR
+
+    ; Set BFFFFh-A0000h as Uncacheable Memory-mapped IO
+    mov ecx,  AMD_AP_MTRR_FIX16k_A0000
+    xor eax,  eax
+    xor edx,  edx
+    _WRMSR
+
+    ; Set DFFFFh-C0000h as Uncacheable Memory-mapped IO
+    xor eax,  eax
+    xor edx,  edx
+    mov ecx,  AMD_AP_MTRR_FIX4k_C0000
+
+CDLoop:
+    _WRMSR
+    inc ecx
+    cmp ecx,  AMD_AP_MTRR_FIX4k_D8000
+    jbe CDLoop
+
+    ; Set FFFFFh-E0000h as Uncacheable Memory
+    mov eax,  18181818h
+    mov edx,  eax
+
+    mov ecx,  AMD_AP_MTRR_FIX4k_E0000
+
+EFLoop:
+    _WRMSR
+    inc ecx
+    cmp ecx,  AMD_AP_MTRR_FIX4k_F8000
+    jbe EFLoop
+
+    ; If IBV provided settings for Fixed-Sized MTRRs,
+    ; overwrite the default settings.
+    .if ((esi != 0) && (esi != 0FFFFFFFFh))
+      mov ecx, (AP_MTRR_SETTINGS ptr [esi]).MsrAddr
+      ; While we are not at the end of the list
+      .while (ecx != CPU_LIST_TERMINAL)
+        ; Ensure that the MSR address is valid for Fixed-Sized MTRRs
+        .if ( ((ecx >= AMD_AP_MTRR_FIX4k_C0000) && (ecx <= AMD_AP_MTRR_FIX4k_F8000)) || \
+               (ecx == AMD_AP_MTRR_FIX64k_00000) || (ecx == AMD_AP_MTRR_FIX16k_80000 ) || (ecx == AMD_AP_MTRR_FIX16k_A0000))
+          mov eax,  dword ptr (AP_MTRR_SETTINGS ptr [esi]).MsrData
+          mov edx,  dword ptr (AP_MTRR_SETTINGS ptr [esi+4]).MsrData
+          _WRMSR
+        .endif
+        add esi,  sizeof (AP_MTRR_SETTINGS)
+        mov ecx,  (AP_MTRR_SETTINGS ptr [esi]).MsrAddr
+      .endw
+    .endif
+
+    ; Enable fixed-range and variable-range MTRRs
+    mov ecx,  AMD_MTRR_DEFTYPE
+    _RDMSR
+    bts eax, MTRR_DEF_TYPE_EN      ; MtrrDefTypeEn
+    bts eax, MTRR_DEF_TYPE_FIX_EN  ; MtrrDefTypeFixEn
+    _WRMSR
+
+    ; Enable Top-of-Memory setting
+    ; Enable use of RdMem/WrMem bits attributes
+    mov ecx,  MTRR_SYS_CFG
+    _RDMSR
+    bts eax,  MTRR_VAR_DRAM_EN     ; Enable
+    btr eax,  MTRR_FIX_DRAM_MOD_EN ; Disable
+    bts eax,  MTRR_FIX_DRAM_EN     ;  Enable
+    _WRMSR
+
+    mov esi, (1 SHL FLAG_IS_PRIMARY)
+  .else                                 ; end if primary core
+    xor esi, esi
+  .endif
+  ; Make sure not to touch any Shared MSR from this point on
+
+  AMD_DISABLE_STACK_FAMILY_HOOK
+
+  bt esi, FLAG_IS_PRIMARY
+  .if (carry?)
+    ; restore variable MTRR6 and MTRR7 to default states
+    mov ecx,  AMD_MTRR_VARIABLE_MASK7    ; clear MTRRPhysBase6 MTRRPhysMask6
+    xor eax,  eax                        ;  and MTRRPhysBase7 MTRRPhysMask7
+    xor edx,  edx
+    .while (cx >= AMD_MTRR_VARIABLE_BASE6)
+      _WRMSR
+      dec cx
+    .endw
+  .endif
+
+@@:
+  cli
+  hlt
+  jmp @B  ;ExecuteHltInstruction
+  ret
+ExecuteFinalHltInstruction ENDP
+
+;======================================================================
+; ExecuteHltInstruction:  Performs a hlt instruction.
+;
+;   In:
+;       None
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       eax, ebx, ecx, edx, esp
+;
+;======================================================================
+PUBLIC  ExecuteHltInstruction
+ExecuteHltInstruction PROC NEAR C
+  cli
+  hlt
+  ret
+ExecuteHltInstruction ENDP
+
+;======================================================================
+; NmiHandler:  Simply performs an IRET.
+;
+;   In:
+;       None
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       None
+;
+;======================================================================
+PUBLIC  NmiHandler
+NmiHandler PROC NEAR C
+  iretd
+NmiHandler ENDP
+
+;======================================================================
+; GetCsSelector:  Returns the current protected mode CS selector.
+;
+;   In:
+;       None
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       None
+;
+;======================================================================
+PUBLIC  GetCsSelector
+GetCsSelector PROC NEAR C, CsSelector:PTR
+  push ax
+  push ebx
+
+  call FarCallGetCs
+  mov  ebx, CsSelector
+  mov  [ebx], ax
+  pop  ebx
+  pop  ax
+  ret
+GetCsSelector ENDP
+
+;======================================================================
+; FarCallGetCs:
+;
+;   In:
+;       None
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       none
+;
+;======================================================================
+FarCallGetCs PROC FAR PRIVATE
+
+  mov  ax, ss:[esp + 4]
+  retf
+
+FarCallGetCs ENDP
+
+;======================================================================
+; SetIdtr:
+;
+;   In:
+;       @param[in]   IdtPtr Points to IDT table
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       none
+;
+;======================================================================
+PUBLIC  SetIdtr
+SetIdtr PROC NEAR C USES EBX, IdtPtr:PTR
+  mov   ebx, IdtPtr
+  lidt  fword ptr ss:[ebx]
+  ret
+SetIdtr ENDP
+
+;======================================================================
+; GetIdtr:
+;
+;   In:
+;       @param[in]   IdtPtr Points to IDT table
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       none
+;
+;======================================================================
+PUBLIC  GetIdtr
+GetIdtr PROC NEAR C USES EBX, IdtPtr:PTR
+  mov   ebx, IdtPtr
+  sidt  fword ptr ss:[ebx]
+  ret
+GetIdtr ENDP
+
+;======================================================================
+; ExecuteWbinvdInstruction:  Performs a wbinvd instruction.
+;
+;   In:
+;       None
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       None
+;
+;======================================================================
+PUBLIC  ExecuteWbinvdInstruction
+ExecuteWbinvdInstruction PROC NEAR C
+  wbinvd                        ; Write back the cache tag RAMs
+  ret
+ExecuteWbinvdInstruction ENDP
+
+END
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt.c
new file mode 100644
index 0000000000..e204a49ba3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt.c
@@ -0,0 +1,306 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HyperTransport features and sequence implementation.
+ *
+ * Implements the external AmdHtInitialize entry point.
+ * Contains routines for directing the sequence of available features.
+ * Mostly, but not exclusively, AGESA_TESTPOINT invocations should be
+ * contained in this file, and not in the feature code.
+ *
+ * From a build option perspective, it may be that a few lines could be removed
+ * from compilation in this file for certain options.  It is considered that
+ * the code savings from this are too small to be of concern and this file
+ * should not have any explicit build option implementation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 35978 $   @e \$Date: 2010-08-07 02:18:50 +0800 (Sat, 07 Aug 2010) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "Filecode.h"
+
+ /*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+// typedef unsigned int   uintptr_t;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+ExecuteFinalHltInstruction (
+  IN       UINT32 SharedCore,
+  IN       AP_MTRR_SETTINGS  *ApMtrrSettingsList,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+NmiHandler (
+  IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+  );
+
+VOID
+ExecuteHltInstruction (
+  IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+  );
+
+VOID
+ExecuteWbinvdInstruction (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+ /*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+//----------------------------------------------------------------------------
+
+STATIC
+VOID
+PrimaryCoreFunctions (AP_MTRR_SETTINGS  *ApMtrrSettingsList)
+   {
+   UINT64 data;
+   UINT32 msrno;
+   // Configure the MTRRs on the AP so
+   // when it runs remote code it will execute
+   // out of RAM instead of ROM.
+   // Disable MTRRs and turn on modification enable bit
+
+   data = __readmsr (0xC0010010);         // MTRR_SYS_CFG
+   data &= ~(1 << 18);                    // MtrrFixDramEn
+   data &= ~(1 << 20);                    // MtrrVarDramEn
+   data |= (1 << 19);                     // MtrrFixDramModEn
+   data |= (1 << 17);                     // SysUcLockEn
+
+
+   __writemsr (0xC0010010, data);
+
+   // Set 7FFFh-00000h and 9FFFFh-80000h as WB DRAM
+   __writemsr (0x250, 0x1E1E1E1E1E1E1E1E); // AMD_MTRR_FIX64k_00000
+   __writemsr (0x258, 0x1E1E1E1E1E1E1E1E); // AMD_MTRR_FIX16k_80000
+
+   // Set BFFFFh-A0000h, DFFFFh-C0000h as Uncacheable Memory-mapped IO
+   __writemsr (0x259, 0);                 // AMD_AP_MTRR_FIX16k_A0000
+   __writemsr (0x268, 0);                 // AMD_MTRR_FIX4k_C0000
+   __writemsr (0x269, 0);                 // AMD_MTRR_FIX4k_C8000
+   __writemsr (0x26A, 0);                 // AMD_MTRR_FIX4k_D0000
+   __writemsr (0x26B, 0);                 // AMD_MTRR_FIX4k_D8000
+
+   // Set FFFFFh-E0000h as Uncacheable Memory
+   for (msrno = 0x26C; msrno <= 0x26F; msrno++)
+      __writemsr (msrno, 0x1818181818181818);
+
+   // If IBV provided settings for Fixed-Sized MTRRs,
+   // overwrite the default settings.
+   if ((uintptr_t) ApMtrrSettingsList != 0 && (uintptr_t) ApMtrrSettingsList != 0xFFFFFFFF)
+      {
+      int index;
+      for (index = 0; ApMtrrSettingsList [index].MsrAddr != CPU_LIST_TERMINAL; index++)
+         __writemsr (ApMtrrSettingsList [index].MsrAddr, ApMtrrSettingsList [index].MsrData);
+      }
+
+   // restore variable MTTR6 and MTTR7 to default states
+   for (msrno = 0x20F; msrno <= 0x20C; msrno--)  // decrement so that the pair is disable before the base is cleared
+      __writemsr (msrno, 0);
+
+   // Enable fixed-range and variable-range MTRRs
+   // Set Fixed-Range Enable (FE) and MTRR Enable (E) bits
+   __writemsr (0x2FF, __readmsr (0x2FF) | 0xC00);
+
+   // Enable Top-of-Memory setting
+   // Enable use of RdMem/WrMem bits attributes
+   data = __readmsr (0xC0010010);         // MTRR_SYS_CFG
+   data |= (1 << 18);                     // MtrrFixDramEn
+   data |= (1 << 20);                     // MtrrVarDramEn
+   data &= ~(1 << 19);                    // MtrrFixDramModEn
+   __writemsr (0xC0010010, data);
+   }
+
+//----------------------------------------------------------------------------
+
+VOID
+ExecuteFinalHltInstruction (
+  IN       UINT32 SharedCore,
+  IN       AP_MTRR_SETTINGS  *ApMtrrSettingsList,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+   int abcdRegs [4];
+   UINT32 cr0val;
+   UINT64 data;
+
+   cr0val = __readcr0 ();
+   if (SharedCore & 2)
+      {
+      // set CombineCr0Cd and enable cache in CR0
+      __writemsr (MSR_CU_CFG3, __readmsr (MSR_CU_CFG3) | 1ULL << 49);
+      __writecr0 (cr0val & ~0x60000000);
+      }
+   else
+      __writecr0 (cr0val | 0x60000000);
+
+   if (SharedCore & 1) PrimaryCoreFunctions (ApMtrrSettingsList);
+
+   // Make sure not to touch any Shared MSR from this point on
+
+   // Restore settings that were temporarily overridden for the cache as ram phase
+   data = __readmsr (0xC0011022);      // MSR_DC_CFG
+   data &= ~(1 << 4);                  // DC_DIS_SPEC_TLB_RLD
+   data &= ~(1 << 8);                  // DIS_CLR_WBTOL2_SMC_HIT
+   data &= ~(1 << 13);                 // DIS_HW_PF
+   __writemsr (0xC0011022, data);
+
+   data = __readmsr (0xC0011021);      // MSR_IC_CFG - C001_1021
+   data &= ~(1 << 9);                  // IC_DIS_SPEC_TLB_RLD
+   __writemsr (0xC0011021, data);
+
+   // AMD_DISABLE_STACK_FAMILY_HOOK
+   __cpuid (abcdRegs, 1);
+   if ((abcdRegs [0] >> 20) == 1) //-----family 10h (Hydra) only-----
+      {
+      data = __readmsr (0xC0011022);
+      data &= ~(1 << 4);
+      data &= ~(1 << 8);
+      data &= ~(1 << 13);
+      __writemsr (0xC0011022, data);
+
+      data = __readmsr (0xC0011021);
+      data &= ~(1 << 14);
+      data &= ~(1 << 9);
+      __writemsr (0xC0011021, data);
+
+      data = __readmsr (0xC001102A);
+      data &= ~(1 << 15);
+      data &= ~(1ull << 35);
+      __writemsr (0xC001102A, data);
+      }
+   else if ((abcdRegs [0] >> 20) == 6) //-----family 15h (Orochi) only-----
+      {
+      data = __readmsr (0xC0011020);
+      data &= ~(1 << 28);
+      __writemsr (0xC0011020, data);
+
+      data = __readmsr (0xC0011021);
+      data &= ~(1 << 9);
+      __writemsr (0xC0011021, data);
+
+      data = __readmsr (0xC0011022);
+      data &= ~(1 << 4);
+      data &= ~(1l << 13);
+      __writemsr (0xC0011022, data);
+      }
+
+   for (;;)
+     {
+     _disable ();
+     __halt ();
+     }
+  }
+
+//----------------------------------------------------------------------------
+
+/// Structure needed to load the IDTR using the lidt instruction
+
+VOID
+SetIdtr (
+  IN     IDT_BASE_LIMIT *IdtInfo,
+  IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+  )
+{
+   __lidt (IdtInfo);
+}
+
+//----------------------------------------------------------------------------
+
+VOID
+GetCsSelector (
+  IN     UINT16 *Selector,
+  IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+  )
+{
+  static const UINT8 opcode [] = {0x8C, 0xC8, 0xC3}; // mov eax, cs; ret
+  *Selector = ((UINT16 (*)(void)) (size_t) opcode) ();
+}
+
+//----------------------------------------------------------------------------
+
+VOID
+NmiHandler (
+  IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+  )
+{
+  static const UINT8 opcode [] = {0xCF};  // iret
+  ((void (*)(void)) (size_t) opcode) ();
+}
+
+//----------------------------------------------------------------------------
+
+VOID
+ExecuteHltInstruction (
+  IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+  )
+{
+  _disable ();
+  __halt ();
+}
+
+//---------------------------------------------------------------------------
+
+VOID
+ExecuteWbinvdInstruction (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  __wbinvd ();
+}
+
+//----------------------------------------------------------------------------
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt64.asm b/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt64.asm
new file mode 100644
index 0000000000..9c6974e702
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cahalt64.asm
@@ -0,0 +1,174 @@
+;/**
+; * @file
+; *
+; * Agesa pre-memory miscellaneous support, including ap halt loop.
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project:      AGESA
+; * @e sub-project:  CPU
+; * @e \$Revision: 10071 $   @e \$Date: 2008-12-16 18:03:04 -0600 (Tue, 16 Dec 2008) $
+; */
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+
+ text  SEGMENT
+
+
+;======================================================================
+; ExecuteFinalHltInstruction:  Performs a hlt instruction.
+;
+;   In:
+;       None
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       eax, ebx, ecx, edx, esp
+;
+;======================================================================
+ExecuteFinalHltInstruction PROC PUBLIC
+@@:
+    cli
+    hlt
+    jmp @B ;ExecuteHltInstruction
+ExecuteFinalHltInstruction ENDP
+
+;======================================================================
+; ExecuteHltInstruction:  Performs a hlt instruction.
+;
+;   In:
+;       None
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       eax, ebx, ecx, edx, esp
+;
+;======================================================================
+ExecuteHltInstruction PROC PUBLIC
+    cli
+    hlt
+    ret
+ExecuteHltInstruction ENDP
+
+;======================================================================
+; NmiHandler:  Simply performs an IRET.
+;
+;   In:
+;       None
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       None
+;
+;======================================================================
+NmiHandler PROC PUBLIC
+    iretq
+NmiHandler ENDP
+
+;======================================================================
+; GetCsSelector:  Returns the current protected mode CS selector.
+;
+;   In:
+;       None
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       None
+;
+;======================================================================
+GetCsSelector PROC PUBLIC
+    ; This stub function is here to avoid compilation errors.
+    ; At this time, there is no need to provide a 64 bit function.
+    ret
+GetCsSelector ENDP
+
+;======================================================================
+; SetIdtr:
+;
+;   In:
+;       @param[in]   IdtPtr Points to IDT table
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       none
+;
+;======================================================================
+SetIdtr PROC PUBLIC
+    ; This stub function is here to avoid compilation errors.
+    ; At this time, there is no need to provide a 64 bit function.
+    ret
+SetIdtr ENDP
+
+;======================================================================
+; GetIdtr:
+;
+;   In:
+;       @param[in]   IdtPtr Points to IDT table
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       none
+;
+;======================================================================
+GetIdtr PROC PUBLIC
+    ; This stub function is here to avoid compilation errors.
+    ; At this time, there is no need to provide a 64 bit function.
+    ret
+GetIdtr ENDP
+
+;======================================================================
+; ExecuteWbinvdInstruction:  Performs a wbinvd instruction.
+;
+;   In:
+;       None
+;
+;   Out:
+;       None
+;
+;   Destroyed:
+;       None
+;
+;======================================================================
+ExecuteWbinvdInstruction PROC PUBLIC
+    wbinvd                        ; Write back the cache tag RAMs
+    ret
+ExecuteWbinvdInstruction ENDP
+
+END
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuApicUtilities.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuApicUtilities.c
new file mode 100644
index 0000000000..bded7e7565
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuApicUtilities.c
@@ -0,0 +1,1443 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU APIC related utility functions.
+ *
+ * Contains code that provides mechanism to invoke and control APIC communication.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuCacheInit.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_CPUAPICUTILITIES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+/* ApFlags bits */
+#define AP_TASK_HAS_INPUT    0x00000001
+#define AP_TASK_HAS_OUTPUT   0x00000002
+#define AP_RETURN_PARAMS     0x00000004
+#define AP_END_AT_HLT        0x00000008
+#define AP_PASS_EARLY_PARAMS 0x00000010
+
+#define XFER_ELEMENT_SIZE    sizeof (UINT32)
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef VOID F_CPU_AMD_NMI_HANDLER (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+typedef F_CPU_AMD_NMI_HANDLER *PF_CPU_AMD_NMI_HANDLER;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+ApUtilSetupIdtForHlt (
+  IN       IDT_DESCRIPTOR *NmiIdtDescPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT32
+STATIC
+ApUtilRemoteRead (
+  IN       UINT32 TargetApicId,
+  IN       UINT8  RegAddr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+ApUtilLocalWrite (
+  IN       UINT32 RegAddr,
+  IN       UINT32 Value,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT32
+STATIC
+ApUtilLocalRead (
+  IN       UINT32 RegAddr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+ApUtilGetLocalApicBase (
+     OUT   UINT64 *ApicBase,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT8
+STATIC
+ApUtilCalculateUniqueId (
+  IN      UINT8 Socket,
+  IN      UINT8 Core,
+  IN      AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+ApUtilFireDirectedNmi (
+  IN      UINT32 TargetApicId,
+  IN      AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+ApUtilReceivePointer (
+  IN       UINT32 TargetApicId,
+     OUT   VOID  **ReturnPointer,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+ApUtilTransmitPointer (
+  IN       UINT32 TargetApicId,
+  IN       VOID  **Pointer,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+PerformFinalHalt (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+LocalApicInitialization (
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+VOID
+LocalApicInitializationAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern
+VOID
+ExecuteHltInstruction (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+extern
+VOID
+NmiHandler (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+extern
+VOID
+ExecuteFinalHltInstruction (
+  IN       UINT32 SharedCore,
+  IN       AP_MTRR_SETTINGS  *ApMtrrSettingsList,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+extern BUILD_OPT_CFG UserOptions;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initialize the Local APIC.
+ *
+ * This function determines and programs the appropriate APIC ID value
+ * for the executing core.  This code must be run after HT initialization
+ * is complete.
+ *
+ *  @param[in]     CpuEarlyParamsPtr  Service parameters.
+ *  @param[in]     StdHeader          Config handle for library and services.
+ *
+ */
+VOID
+LocalApicInitialization (
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  )
+{
+  UINT32    CurrentCore;
+  UINT32    CurrentNodeNum;
+  UINT32    CoreIdBits;
+  UINT32    Mnc;
+  UINT32    ProcessorCount;
+  UINT32    ProcessorApicIndex;
+  UINT32    IoApicNum;
+  UINT32    StartLocalApicId;
+  UINT64    LocalApicBase;
+  UINT32    TempVar_a;
+  UINT64    MsrData;
+  UINT64    Address;
+  CPUID_DATA  CpuidData;
+
+  // Local variables default values
+  IoApicNum = CpuEarlyParamsPtr->PlatformConfig.NumberOfIoApics;
+
+  GetCurrentCore (&CurrentCore, StdHeader);
+  GetCurrentNodeNum (&CurrentNodeNum, StdHeader);
+
+  // Get Mnc
+  LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuidData, StdHeader);
+  CoreIdBits = (CpuidData.ECX_Reg & 0x0000F000) >> 12;
+  Mnc = 1 << (CoreIdBits & 0x000F);
+
+  // Get ProcessorCount in the system
+  ProcessorCount = GetNumberOfProcessors (StdHeader);
+
+  // Get the APIC Index of this processor.
+  ProcessorApicIndex = GetProcessorApicIndex (CurrentNodeNum, StdHeader);
+
+  TempVar_a = (Mnc * ProcessorCount) + IoApicNum;
+  ASSERT (TempVar_a < 255);
+
+  // Apply apic enumeration rules
+  // For systems with >= 16 APICs, put the IO-APICs at 0..n and
+  // put the local-APICs at m..z
+  // For systems with < 16 APICs, put the Local-APICs at 0..n and
+  // put the IO-APICs at (n + 1)..z
+  // This is needed because many IO-APIC devices only have 4 bits
+  // for their APIC id and therefore must reside at 0..15
+  StartLocalApicId = 0;
+  if (TempVar_a >= 16) {
+    if (IoApicNum >= 1) {
+      StartLocalApicId = (IoApicNum - 1) / Mnc;
+      StartLocalApicId = (StartLocalApicId + 1) * Mnc;
+    }
+  }
+
+  // Set local apic id
+  TempVar_a = (ProcessorApicIndex * Mnc) + CurrentCore + StartLocalApicId;
+  IDS_HDT_CONSOLE (CPU_TRACE, "  Node %d core %d APIC ID = 0x%x\n", CurrentNodeNum, CurrentCore, TempVar_a);
+  TempVar_a = TempVar_a << APIC20_ApicId;
+
+  // Enable local apic id
+  LibAmdMsrRead (MSR_APIC_BAR, &MsrData, StdHeader);
+  MsrData |= APIC_ENABLE_BIT;
+  LibAmdMsrWrite (MSR_APIC_BAR, &MsrData, StdHeader);
+
+  // Get local apic base Address
+  ApUtilGetLocalApicBase (&LocalApicBase, StdHeader);
+
+  Address = LocalApicBase + APIC_ID_REG;
+  LibAmdMemWrite (AccessWidth32, Address, &TempVar_a, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initialize the Local APIC at the AmdInitEarly entry point.
+ *
+ * This function acts as a wrapper for calling the LocalApicInitialization
+ * routine at AmdInitEarly.
+ *
+ *  @param[in]   FamilyServices      The current Family Specific Services.
+ *  @param[in]   EarlyParams         Service parameters.
+ *  @param[in]   StdHeader           Config handle for library and services.
+ *
+ */
+VOID
+LocalApicInitializationAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  AGESA_TESTPOINT (TpProcCpuLocalApicInit, StdHeader);
+  LocalApicInitialization (EarlyParams, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for all APs in the system.
+ *
+ * This routine puts the AP cores in an infinite loop in which the cores
+ * will poll their masters, waiting to be told to perform a task.  At early,
+ * all socket-relative core zeros will receive their tasks from the BSC.
+ * All others will receive their tasks from the core zero of their local
+ * processor.  At the end of AmdInitEarly, all cores will switch to receiving
+ * their tasks from the BSC.
+ *
+ * @param[in]     StdHeader       Handle to config for library and services.
+ * @param[in]     CpuEarlyParams  AMD_CPU_EARLY_PARAMS pointer.
+ *
+ */
+VOID
+ApEntry (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+  )
+{
+  UINT8   RemoteCmd;
+  UINT8   SourceSocket;
+  UINT8   CommandStart;
+  UINT32  ApFlags;
+  UINT32  FuncType;
+  UINT32  ReturnCode;
+  UINT32  CurrentSocket;
+  UINT32  CurrentCore;
+  UINT32  *InputDataPtr;
+  UINT32  BscSocket;
+  UINT32  Ignored;
+  UINT32  TargetApicId;
+  AP_FUNCTION_PTR FuncAddress;
+  IDT_DESCRIPTOR IdtDesc[32];
+  AP_DATA_TRANSFER DataTransferInfo;
+  AGESA_STATUS IgnoredSts;
+
+  ASSERT (!IsBsp (StdHeader, &IgnoredSts));
+
+  // Initialize local variables
+  ReturnCode = 0;
+  DataTransferInfo.DataTransferFlags = 0;
+  InputDataPtr = NULL;
+
+  // Determine the executing core's socket and core numbers
+  IdentifyCore (StdHeader, &CurrentSocket, &Ignored, &CurrentCore, &IgnoredSts);
+
+  IDS_HDT_CONSOLE (CPU_TRACE, "  Socket %d core %d begin AP tasking engine\n", CurrentSocket, CurrentCore);
+
+  // Determine the BSC's socket number
+  GetSocketModuleOfNode ((UINT32) 0x00000000, &BscSocket, &Ignored, StdHeader);
+
+  // Setup Interrupt Descriptor Table for sleep mode
+  ApUtilSetupIdtForHlt (&IdtDesc[2], StdHeader);
+
+  // Indicate to the BSC that we have reached the tasking engine
+  ApUtilWriteControlByte (CORE_IDLE, StdHeader);
+
+  if (CurrentCore == 0) {
+    // Core 0s receive their tasks from the BSC
+    SourceSocket = (UINT8) BscSocket;
+  } else {
+    // All non-zero cores receive their tasks from the core 0 of their socket
+    SourceSocket = (UINT8) CurrentSocket;
+  }
+
+  GetLocalApicIdForCore (SourceSocket, 0, &TargetApicId, StdHeader);
+
+  // Determine the unique value that the master will write when it has a task
+  // for this core to perform.
+  CommandStart = ApUtilCalculateUniqueId (
+                   (UINT8)CurrentSocket,
+                   (UINT8)CurrentCore,
+                   StdHeader
+                   );
+  for (;;) {
+    RemoteCmd = ApUtilReadRemoteControlByte (TargetApicId, StdHeader);
+    if (RemoteCmd == CommandStart) {
+      ApFlags = ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+
+      ApUtilReceivePointer (TargetApicId, (VOID **) &FuncAddress, StdHeader);
+
+      FuncType = ApFlags & (UINT32) (AP_TASK_HAS_INPUT | AP_TASK_HAS_OUTPUT | AP_PASS_EARLY_PARAMS);
+      if ((ApFlags & AP_TASK_HAS_INPUT) != 0) {
+        DataTransferInfo.DataSizeInDwords = 0;
+        DataTransferInfo.DataPtr = NULL;
+        DataTransferInfo.DataTransferFlags = 0;
+        if (ApUtilReceiveBuffer (SourceSocket, 0, &DataTransferInfo, StdHeader) == AGESA_ERROR) {
+          // There is not enough space to put the input data on the heap.  Undefined behavior is about
+          // to result.
+          IDS_ERROR_TRAP;
+        }
+        InputDataPtr = (UINT32 *) DataTransferInfo.DataPtr;
+      }
+      ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+      switch (FuncType) {
+      case 0:
+        FuncAddress.PfApTask (StdHeader);
+        break;
+      case AP_TASK_HAS_INPUT:
+        FuncAddress.PfApTaskI (InputDataPtr, StdHeader);
+        break;
+      case AP_PASS_EARLY_PARAMS:
+        FuncAddress.PfApTaskC (StdHeader, CpuEarlyParams);
+        break;
+      case (AP_TASK_HAS_INPUT | AP_PASS_EARLY_PARAMS):
+        FuncAddress.PfApTaskIC (InputDataPtr, StdHeader, CpuEarlyParams);
+        break;
+      case AP_TASK_HAS_OUTPUT:
+        ReturnCode = FuncAddress.PfApTaskO (StdHeader);
+        break;
+      case (AP_TASK_HAS_INPUT | AP_TASK_HAS_OUTPUT):
+        ReturnCode = FuncAddress.PfApTaskIO (InputDataPtr, StdHeader);
+        break;
+      case (AP_TASK_HAS_OUTPUT | AP_PASS_EARLY_PARAMS):
+        ReturnCode = FuncAddress.PfApTaskOC (StdHeader, CpuEarlyParams);
+        break;
+      case (AP_TASK_HAS_INPUT | AP_TASK_HAS_OUTPUT | AP_PASS_EARLY_PARAMS):
+        ReturnCode = FuncAddress.PfApTaskIOC (InputDataPtr, StdHeader, CpuEarlyParams);
+        break;
+      default:
+        ReturnCode = 0;
+        break;
+      }
+      if (((ApFlags & AP_RETURN_PARAMS) != 0)) {
+        ApUtilTransmitBuffer (SourceSocket, 0, &DataTransferInfo, StdHeader);
+      }
+      if ((ApFlags & AP_TASK_HAS_OUTPUT) != 0) {
+        ApUtilWriteDataDword (ReturnCode, StdHeader);
+      }
+      if ((ApFlags & AP_END_AT_HLT) != 0) {
+        RemoteCmd = CORE_IDLE_HLT;
+      } else {
+        ApUtilWriteControlByte (CORE_IDLE, StdHeader);
+      }
+    }
+    if (RemoteCmd == CORE_IDLE_HLT) {
+      SourceSocket = (UINT8) BscSocket;
+      GetLocalApicIdForCore (SourceSocket, 0, &TargetApicId, StdHeader);
+      ApUtilWriteControlByte (CORE_IDLE_HLT, StdHeader);
+      ExecuteHltInstruction (StdHeader);
+      ApUtilWriteControlByte (CORE_IDLE, StdHeader);
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Reads the 'control byte' on the designated remote core.
+ *
+ * This function will read the current contents of the control byte
+ * on the designated core using the APIC remote read inter-
+ * processor interrupt sequence.
+ *
+ * @param[in]      TargetApicId  Local APIC ID of the desired core
+ * @param[in]      StdHeader     Configuration parameters pointer
+ *
+ * @return         The current value of the remote cores control byte
+ *
+ */
+UINT8
+ApUtilReadRemoteControlByte (
+  IN       UINT32 TargetApicId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8  ControlByte;
+  UINT32 ApicRegister;
+
+  ApicRegister = ApUtilRemoteRead (TargetApicId, APIC_CTRL_DWORD, StdHeader);
+  ControlByte = (UINT8) ((ApicRegister & APIC_CTRL_MASK) >> APIC_CTRL_SHIFT);
+  return (ControlByte);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Writes the 'control byte' on the executing core.
+ *
+ * This function writes data to a local APIC offset used in inter-
+ * processor communication.
+ *
+ * @param[in]       Value
+ * @param[in]       StdHeader
+ *
+ */
+VOID
+ApUtilWriteControlByte (
+  IN       UINT8 Value,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 ApicRegister;
+
+  ApicRegister = ApUtilLocalRead (APIC_CTRL_REG, StdHeader);
+  ApicRegister = ((ApicRegister & ~APIC_CTRL_MASK) | (UINT32) (Value << APIC_CTRL_SHIFT));
+  ApUtilLocalWrite (APIC_CTRL_REG, ApicRegister, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Reads the 'data dword' on the designated remote core.
+ *
+ * This function will read the current contents of the data dword
+ * on the designated core using the APIC remote read inter-
+ * processor interrupt sequence.
+ *
+ * @param[in]      TargetApicId  Local APIC ID of the desired core
+ * @param[in]      StdHeader     Configuration parameters pointer
+ *
+ * @return         The current value of the remote core's data dword
+ *
+ */
+UINT32
+ApUtilReadRemoteDataDword (
+  IN       UINT32 TargetApicId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  return (ApUtilRemoteRead (TargetApicId, APIC_DATA_DWORD, StdHeader));
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Writes the 'data dword' on the executing core.
+ *
+ * This function writes data to a local APIC offset used in inter-
+ * processor communication.
+ *
+ * @param[in]      Value        Value to write
+ * @param[in]      StdHeader    Configuration parameters pointer
+ *
+ */
+VOID
+ApUtilWriteDataDword (
+  IN       UINT32 Value,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  ApUtilLocalWrite (APIC_DATA_REG, Value, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Runs the given task on the specified local core.
+ *
+ * This function is used to invoke an AP to run a specified AGESA
+ * procedure.  It can only be called by cores that have subordinate
+ * APs -- the BSC at POST, or any socket-relative core 0s at Early.
+ *
+ * @param[in]      Socket       Socket number of the target core
+ * @param[in]      Core         Core number of the target core
+ * @param[in]      TaskPtr      Function descriptor
+ * @param[in]      StdHeader    Configuration parameters pointer
+ *
+ * @return         Return value of the task that the AP core ran,
+ *                 or zero if the task was VOID.
+ *
+ */
+UINT32
+ApUtilRunCodeOnSocketCore (
+  IN       UINT8   Socket,
+  IN       UINT8   Core,
+  IN       AP_TASK *TaskPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8  CoreId;
+  UINT8  CurrentStatus;
+  UINT8  WaitStatus[3];
+  UINT32 ApFlags;
+  UINT32 ReturnCode;
+  UINT32 TargetApicId;
+  AP_WAIT_FOR_STATUS WaitForStatus;
+
+  ApFlags = 0;
+  ReturnCode = 0;
+
+  CoreId = ApUtilCalculateUniqueId (Socket, Core, StdHeader);
+
+  GetLocalApicIdForCore (Socket, Core, &TargetApicId, StdHeader);
+
+  if (TaskPtr->DataTransfer.DataSizeInDwords != 0) {
+    ApFlags |= AP_TASK_HAS_INPUT;
+    if (((TaskPtr->ExeFlags & RETURN_PARAMS) != 0) &&
+        ((TaskPtr->DataTransfer.DataTransferFlags & DATA_IN_MEMORY) == 0)) {
+      ApFlags |= AP_RETURN_PARAMS;
+    }
+  }
+
+  if ((TaskPtr->ExeFlags & TASK_HAS_OUTPUT) != 0) {
+    ApFlags |= AP_TASK_HAS_OUTPUT;
+  }
+
+  if ((TaskPtr->ExeFlags & END_AT_HLT) != 0) {
+    ApFlags |= AP_END_AT_HLT;
+  }
+
+  if ((TaskPtr->ExeFlags & PASS_EARLY_PARAMS) != 0) {
+    ApFlags |= AP_PASS_EARLY_PARAMS;
+  }
+
+  WaitStatus[0] = CORE_IDLE;
+  WaitStatus[1] = CORE_IDLE_HLT;
+  WaitStatus[2] = CORE_UNAVAILABLE;
+  WaitForStatus.Status = WaitStatus;
+  WaitForStatus.NumberOfElements = 3;
+  WaitForStatus.RetryCount = WAIT_INFINITELY;
+  WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+  CurrentStatus = ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+
+  if (CurrentStatus != CORE_UNAVAILABLE) {
+    ApUtilWriteDataDword (ApFlags, StdHeader);
+    ApUtilWriteControlByte (CoreId, StdHeader);
+
+    if (CurrentStatus == CORE_IDLE_HLT) {
+      ApUtilFireDirectedNmi (TargetApicId, StdHeader);
+    }
+
+    ApUtilTransmitPointer (TargetApicId, (VOID **) &TaskPtr->FuncAddress, StdHeader);
+
+    if ((ApFlags & AP_TASK_HAS_INPUT) != 0) {
+      ApUtilTransmitBuffer (Socket, Core, &TaskPtr->DataTransfer, StdHeader);
+    }
+
+    if ((TaskPtr->ExeFlags & WAIT_FOR_CORE) != 0) {
+      if (((ApFlags & AP_TASK_HAS_INPUT) != 0) &&
+          ((ApFlags & AP_RETURN_PARAMS) != 0) &&
+          ((TaskPtr->DataTransfer.DataTransferFlags & DATA_IN_MEMORY) == 0)) {
+        if (ApUtilReceiveBuffer (Socket, Core, &TaskPtr->DataTransfer, StdHeader) == AGESA_ERROR) {
+          // There is not enough space to put the return data.  This should never occur.  If it
+          // does, this would point to strange heap corruption.
+          IDS_ERROR_TRAP;
+        }
+      }
+
+      ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+      if ((ApFlags & AP_TASK_HAS_OUTPUT) != 0) {
+        ReturnCode = ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+      }
+    }
+  } else {
+    ReturnCode = 0;
+  }
+  return (ReturnCode);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Waits for a remote core's control byte value to either be equal or
+ * not equal to any number of specified values.
+ *
+ * This function will loop doing remote read IPIs until the remote core's
+ * control byte becomes one of the values in the input array if the input
+ * flags are set for equality.  Otherwise, the loop will continue until
+ * the control byte value is not equal to one of the elements in the
+ * array.  The caller can also specify an iteration count for timeout
+ * purposes.
+ *
+ * @param[in]      TargetApicId   Local APIC ID of the desired core
+ * @param[in]      WaitParamsPtr  Wait parameter structure
+ * @param[in]      StdHeader      Configuration parameteres pointer
+ *
+ * @return         The current value of the remote core's control byte
+ *
+ */
+UINT8
+ApUtilWaitForCoreStatus (
+  IN       UINT32 TargetApicId,
+  IN       AP_WAIT_FOR_STATUS *WaitParamsPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  BOOLEAN  IsEqual;
+  UINT8 CoreStatus;
+  UINT8 i;
+  UINT8 j;
+
+  CoreStatus = 0;
+  for (i = 0; (WaitParamsPtr->RetryCount == WAIT_INFINITELY) ||
+              (i < WaitParamsPtr->RetryCount); ++i) {
+    CoreStatus = ApUtilReadRemoteControlByte (TargetApicId, StdHeader);
+    // Determine whether or not the current remote status is equal
+    // to an element in the array.
+    IsEqual = FALSE;
+    for (j = 0; !IsEqual && j < WaitParamsPtr->NumberOfElements; ++j) {
+      if (CoreStatus == WaitParamsPtr->Status[j]) {
+        IsEqual = TRUE;
+      }
+    }
+    if ((((WaitParamsPtr->WaitForStatusFlags & WAIT_STATUS_EQUALITY) != 0) && IsEqual) ||
+        (((WaitParamsPtr->WaitForStatusFlags & WAIT_STATUS_EQUALITY) == 0) && !IsEqual)) {
+      break;
+    }
+  }
+  return (CoreStatus);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Runs the AP task on the executing core.
+ *
+ * @param[in]      TaskPtr      Function descriptor
+ * @param[in]      StdHeader    Configuration parameters pointer
+ * @param[in]      ConfigParams Entry point CPU parameters pointer
+ *
+ * @return         Return value of the task, or zero if the task
+ *                 was VOID.
+ *
+ */
+UINT32
+ApUtilTaskOnExecutingCore (
+  IN       AP_TASK *TaskPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       VOID *ConfigParams
+  )
+{
+  UINT32   InvocationOptions;
+  UINT32   ReturnCode;
+
+  ReturnCode = 0;
+  InvocationOptions = 0;
+
+  if (TaskPtr->DataTransfer.DataSizeInDwords != 0) {
+    InvocationOptions |= AP_TASK_HAS_INPUT;
+  }
+  if ((TaskPtr->ExeFlags & TASK_HAS_OUTPUT) != 0) {
+    InvocationOptions |= AP_TASK_HAS_OUTPUT;
+  }
+  if ((TaskPtr->ExeFlags & PASS_EARLY_PARAMS) != 0) {
+    InvocationOptions |= AP_PASS_EARLY_PARAMS;
+  }
+
+  switch (InvocationOptions) {
+  case 0:
+    TaskPtr->FuncAddress.PfApTask (StdHeader);
+    break;
+  case AP_TASK_HAS_INPUT:
+    TaskPtr->FuncAddress.PfApTaskI (TaskPtr->DataTransfer.DataPtr, StdHeader);
+    break;
+  case AP_PASS_EARLY_PARAMS:
+    TaskPtr->FuncAddress.PfApTaskC (StdHeader, ConfigParams);
+    break;
+  case (AP_TASK_HAS_INPUT | AP_PASS_EARLY_PARAMS):
+    TaskPtr->FuncAddress.PfApTaskIC (TaskPtr->DataTransfer.DataPtr, StdHeader, ConfigParams);
+    break;
+  case AP_TASK_HAS_OUTPUT:
+    ReturnCode = TaskPtr->FuncAddress.PfApTaskO (StdHeader);
+    break;
+  case (AP_TASK_HAS_INPUT | AP_TASK_HAS_OUTPUT):
+    ReturnCode = TaskPtr->FuncAddress.PfApTaskIO (TaskPtr->DataTransfer.DataPtr, StdHeader);
+    break;
+  case (AP_TASK_HAS_OUTPUT | AP_PASS_EARLY_PARAMS):
+    ReturnCode = TaskPtr->FuncAddress.PfApTaskOC (StdHeader, ConfigParams);
+    break;
+  case (AP_TASK_HAS_INPUT | AP_TASK_HAS_OUTPUT | AP_PASS_EARLY_PARAMS):
+    ReturnCode = TaskPtr->FuncAddress.PfApTaskIOC (TaskPtr->DataTransfer.DataPtr, StdHeader, ConfigParams);
+    break;
+  default:
+    ReturnCode = 0;
+    break;
+  }
+  return (ReturnCode);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Sets up the AP's IDT with NMI (INT2) being the only valid descriptor
+ *
+ * This function prepares the executing AP core for recovering from a hlt
+ * instruction by initializing its IDTR.
+ *
+ * @param[in]        NmiIdtDescPtr Pointer to a writable IDT entry to
+ *                                 be used for NMIs
+ * @param[in]        StdHeader     Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilSetupIdtForHlt (
+  IN       IDT_DESCRIPTOR *NmiIdtDescPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8   DescSize;
+  UINT64  HandlerOffset;
+  UINT64  EferRegister;
+  IDT_BASE_LIMIT IdtInfo;
+
+  LibAmdMsrRead (MSR_EXTENDED_FEATURE_EN, &EferRegister, StdHeader);
+  if ((EferRegister & 0x100) != 0) {
+    DescSize = 16;
+  } else {
+    DescSize = 8;
+  }
+
+  HandlerOffset = (UINT64) NmiHandler;
+  NmiIdtDescPtr->OffsetLo = (UINT16) HandlerOffset & 0xFFFF;
+  NmiIdtDescPtr->OffsetHi = (UINT16) (HandlerOffset >> 16);
+  GetCsSelector (&NmiIdtDescPtr->Selector, StdHeader);
+  NmiIdtDescPtr->Flags = IDT_DESC_PRESENT | IDT_DESC_TYPE_INT32;
+  NmiIdtDescPtr->Rsvd = 0;
+  NmiIdtDescPtr->Offset64 = (UINT32) (HandlerOffset >> 32);
+  NmiIdtDescPtr->Rsvd64 = 0;
+  IdtInfo.Limit = (UINT16) ((DescSize * 3) - 1);
+  IdtInfo.Base = (UINT64) NmiIdtDescPtr - (DescSize * 2);
+  IDS_EXCEPTION_TRAP (IDS_IDT_UPDATE_EXCEPTION_VECTOR_FOR_AP, &IdtInfo, StdHeader);
+  SetIdtr (&IdtInfo , StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Calculate the APIC ID for a given core.
+ *
+ * Get the current node's apic id and deconstruct it to the base id of local apic id space.
+ * Then construct the target's apic id using that base.
+ * @b Assumes: The target Socket and Core exist!
+ * Other Notes:
+ *  - Must run after HT initialization is complete.
+ *  - Code sync: This calculation MUST match the assignment
+ *    calculation done above in LocalApicInitializationAtEarly function.
+ *  - Assumes family homogeneous population of all sockets.
+ *
+ *  @param[in]      TargetSocket   The socket in which the Core's Processor is installed.
+ *  @param[in]      TargetCore     The Core on that Processor
+ *  @param[out]     LocalApicId    Its APIC Id
+ *  @param[in]      StdHeader      Handle to header for library and services.
+ *
+ */
+VOID
+GetLocalApicIdForCore (
+  IN       UINT32            TargetSocket,
+  IN       UINT32            TargetCore,
+     OUT   UINT32            *LocalApicId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32  CoreIdBits;
+  UINT32  CurrentNode;
+  UINT32  CurrentCore;
+  UINT32  TargetNode;
+  UINT32  MaxCoresInProcessor;
+  UINT32  TotalCores;
+  UINT32  CurrentLocalApicId;
+  UINT64  LocalApicBase;
+  UINT32  TempVar_a;
+  UINT64  Address;
+  UINT32  ProcessorApicIndex;
+  BOOLEAN ReturnResult;
+  CPUID_DATA  CpuidData;
+
+  TargetNode = 0;
+
+  // Get local apic base Address
+  ApUtilGetLocalApicBase (&LocalApicBase, StdHeader);
+  Address = LocalApicBase + APIC_ID_REG;
+
+  LibAmdMemRead (AccessWidth32, Address, &TempVar_a, StdHeader);
+
+  // ApicId [7:0]
+  CurrentLocalApicId = (TempVar_a >> APIC20_ApicId) & 0x000000FF;
+
+  GetCurrentNodeAndCore (&CurrentNode, &CurrentCore, StdHeader);
+  LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuidData, StdHeader);
+  CoreIdBits = (CpuidData.ECX_Reg & 0x0000F000) >> 12;
+  MaxCoresInProcessor = (1 << CoreIdBits);
+
+  // Get the APIC Index of this processor.
+  ProcessorApicIndex = GetProcessorApicIndex (CurrentNode, StdHeader);
+
+  TotalCores = (MaxCoresInProcessor * ProcessorApicIndex) + CurrentCore;
+  CurrentLocalApicId -= TotalCores;
+
+  // Use the Node Id of TargetSocket, Module 0.  No socket transitions are missed or added,
+  // even if the TargetCore is not on Module 0 in that processor and that's all that matters now.
+  ReturnResult = GetNodeId (TargetSocket, 0, (UINT8 *)&TargetNode, StdHeader);
+  ASSERT (ReturnResult);
+
+  // Get the APIC Index of this processor.
+  ProcessorApicIndex = GetProcessorApicIndex (TargetNode, StdHeader);
+
+  CurrentLocalApicId += ((MaxCoresInProcessor * ProcessorApicIndex) + TargetCore);
+  *LocalApicId = CurrentLocalApicId;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Securely passes a buffer to the designated remote core.
+ *
+ * This function uses a sequence of remote reads to transmit a data
+ * buffer, one UINT32 at a time.
+ *
+ * @param[in]      Socket       Socket number of the remote core
+ * @param[in]      Core         Core number of the remote core
+ * @param[in]      BufferInfo   Information about the buffer to pass, and
+ *                              how to pass it
+ * @param[in]      StdHeader    Configuration parameters pointer
+ *
+ */
+VOID
+ApUtilTransmitBuffer (
+  IN       UINT8   Socket,
+  IN       UINT8   Core,
+  IN       AP_DATA_TRANSFER  *BufferInfo,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8  TargetCore;
+  UINT8  MyUniqueId;
+  UINT8  CurrentStatus;
+  UINT32 *CurrentPtr;
+  UINT32 i;
+  UINT32 MyCore;
+  UINT32 MySocket;
+  UINT32 Ignored;
+  UINT32 TargetApicId;
+  AP_WAIT_FOR_STATUS WaitForStatus;
+  AGESA_STATUS IgnoredSts;
+
+  GetLocalApicIdForCore ((UINT32) Socket, (UINT32) Core, &TargetApicId, StdHeader);
+
+  if ((BufferInfo->DataTransferFlags & DATA_IN_MEMORY) != 0) {
+    ApUtilWriteDataDword ((UINT32) 0x00000000, StdHeader);
+  } else {
+    ApUtilWriteDataDword ((UINT32) BufferInfo->DataSizeInDwords, StdHeader);
+  }
+  TargetCore = ApUtilCalculateUniqueId (Socket, Core, StdHeader);
+
+  ApUtilWriteControlByte (TargetCore, StdHeader);
+
+  IdentifyCore (StdHeader, &MySocket, &Ignored, &MyCore, &IgnoredSts);
+
+  MyUniqueId = ApUtilCalculateUniqueId ((UINT8)MySocket, (UINT8)MyCore, StdHeader);
+
+  WaitForStatus.Status = &MyUniqueId;
+  WaitForStatus.NumberOfElements = 1;
+  WaitForStatus.RetryCount = WAIT_INFINITELY;
+  WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+
+  ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+  ApUtilWriteDataDword (BufferInfo->DataTransferFlags, StdHeader);
+
+  ApUtilWriteControlByte (CORE_DATA_FLAGS_READY, StdHeader);
+  WaitForStatus.WaitForStatusFlags = 0;
+  ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+  if ((BufferInfo->DataTransferFlags & DATA_IN_MEMORY) != 0) {
+    ApUtilTransmitPointer (TargetApicId, (VOID **) &BufferInfo->DataPtr, StdHeader);
+  } else {
+    ApUtilWriteControlByte (CORE_STS_DATA_READY_1, StdHeader);
+    CurrentStatus = CORE_STS_DATA_READY_0;
+    WaitForStatus.Status = &CurrentStatus;
+    WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+    ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+    WaitForStatus.WaitForStatusFlags = 0;
+    CurrentPtr = (UINT32 *) BufferInfo->DataPtr;
+    for (i = 0; i < BufferInfo->DataSizeInDwords; ++i) {
+      ApUtilWriteDataDword (*CurrentPtr++, StdHeader);
+      ApUtilWriteControlByte (CurrentStatus, StdHeader);
+      ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+      CurrentStatus ^= 0x01;
+    }
+  }
+  ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Securely receives a buffer from the designated remote core.
+ *
+ * This function uses a sequence of remote reads to receive a data
+ * buffer, one UINT32 at a time.
+ *
+ * @param[in]      Socket       Socket number of the remote core
+ * @param[in]      Core         Core number of the remote core
+ * @param[in]      BufferInfo   Information about where to place the buffer
+ * @param[in]      StdHeader    Configuration parameters pointer
+ *
+ * @retval         AGESA_SUCCESS Transaction was successful
+ * @retval         AGESA_ALERT   The non-NULL desired location to place
+ *                               the buffer was not used as the buffer
+ *                               resides in a shared memory space.  The
+ *                               input data pointer has changed.
+ * @retval         AGESA_ERROR   There is not enough room to receive the
+ *                               buffer.
+ *
+ */
+AGESA_STATUS
+ApUtilReceiveBuffer (
+  IN       UINT8   Socket,
+  IN       UINT8   Core,
+  IN OUT   AP_DATA_TRANSFER  *BufferInfo,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8    MyUniqueId;
+  UINT8    SourceUniqueId;
+  UINT8    CurrentStatus;
+  UINT32   i;
+  UINT32   MySocket;
+  UINT32   MyCore;
+  UINT32   Ignored;
+  UINT32   *CurrentPtr;
+  UINT32   TransactionSize;
+  UINT32   TargetApicId;
+  AGESA_STATUS ReturnStatus;
+  ALLOCATE_HEAP_PARAMS HeapMalloc;
+  AP_WAIT_FOR_STATUS WaitForStatus;
+
+  ReturnStatus = AGESA_SUCCESS;
+  IdentifyCore (StdHeader, &MySocket, &Ignored, &MyCore, &ReturnStatus);
+
+  MyUniqueId = ApUtilCalculateUniqueId ((UINT8)MySocket, (UINT8)MyCore, StdHeader);
+
+  GetLocalApicIdForCore ((UINT32) Socket, (UINT32) Core, &TargetApicId, StdHeader);
+
+  WaitForStatus.Status = &MyUniqueId;
+  WaitForStatus.NumberOfElements = 1;
+  WaitForStatus.RetryCount = WAIT_INFINITELY;
+  WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+
+  ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+  TransactionSize = ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+
+  if (BufferInfo->DataPtr == NULL && TransactionSize != 0) {
+    HeapMalloc.BufferHandle = AMD_CPU_AP_TASKING_HANDLE;
+    HeapMalloc.Persist = HEAP_LOCAL_CACHE;
+    // Deallocate the general purpose heap structure, if it exists.  Ignore
+    // the status in case it does not exist.
+    HeapDeallocateBuffer (HeapMalloc.BufferHandle, StdHeader);
+    HeapMalloc.RequestedBufferSize = (TransactionSize * XFER_ELEMENT_SIZE);
+    if (HeapAllocateBuffer (&HeapMalloc, StdHeader) == AGESA_SUCCESS) {
+      BufferInfo->DataPtr = (UINT32 *) HeapMalloc.BufferPtr;
+      BufferInfo->DataSizeInDwords = (UINT16) (HeapMalloc.RequestedBufferSize / XFER_ELEMENT_SIZE);
+    } else {
+      BufferInfo->DataSizeInDwords = 0;
+    }
+  }
+
+  if (TransactionSize <= BufferInfo->DataSizeInDwords) {
+    SourceUniqueId = ApUtilCalculateUniqueId (Socket, Core, StdHeader);
+    ApUtilWriteControlByte (SourceUniqueId, StdHeader);
+    CurrentStatus = CORE_DATA_FLAGS_READY;
+    WaitForStatus.Status = &CurrentStatus;
+    ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+    BufferInfo->DataTransferFlags =  ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+    ApUtilWriteControlByte (CORE_DATA_FLAGS_ACKNOWLEDGE, StdHeader);
+    if ((BufferInfo->DataTransferFlags & DATA_IN_MEMORY) != 0) {
+      if (BufferInfo->DataPtr != NULL) {
+        ReturnStatus = AGESA_ALERT;
+      }
+      ApUtilReceivePointer (TargetApicId, (VOID **) &BufferInfo->DataPtr, StdHeader);
+    } else {
+      CurrentStatus = CORE_STS_DATA_READY_1;
+      ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+      CurrentStatus = CORE_STS_DATA_READY_0;
+      ApUtilWriteControlByte (CurrentStatus, StdHeader);
+      CurrentPtr = BufferInfo->DataPtr;
+      for (i = 0; i < TransactionSize; ++i) {
+        ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+        *CurrentPtr++ = ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+        CurrentStatus ^= 0x01;
+        ApUtilWriteControlByte (CurrentStatus, StdHeader);
+      }
+    }
+    ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+  } else {
+    BufferInfo->DataSizeInDwords = (UINT16) TransactionSize;
+    ReturnStatus = AGESA_ERROR;
+  }
+  return (ReturnStatus);
+}
+
+
+VOID
+RelinquishControlOfAllAPs (
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  UINT32        BscSocket;
+  UINT32        Ignored;
+  UINT32        BscCoreNum;
+  UINT32        Core;
+  UINT32        Socket;
+  UINT32        NumberOfSockets;
+  AP_TASK       TaskPtr;
+  AGESA_STATUS  IgnoredSts;
+
+  ASSERT (IsBsp (StdHeader, &IgnoredSts));
+
+  TaskPtr.FuncAddress.PfApTask = PerformFinalHalt;
+  TaskPtr.DataTransfer.DataSizeInDwords = 0;
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+
+  IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (GetActiveCoresInGivenSocket (Socket, &Core, StdHeader)) {
+      while (Core-- > 0) {
+        if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+          ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+        }
+      }
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------
+ *                           L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * The last AGESA code that an AP performs
+ *
+ * This function, run only by APs, breaks down their cache subsystem, sets up
+ * for memory to be present upon wake (from IBV Init/Startup IPIs), and halts.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+STATIC
+PerformFinalHalt (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 PrimaryCore;
+  UINT32 HaltFlags;
+  UINT32 CacheEnDis;
+  CPU_SPECIFIC_SERVICES *FamilyServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+  ASSERT (FamilyServices != NULL);
+  // CacheEnDis is a family specific flag, that lets the code to decide whether to
+  // keep the cache control bits set or cleared.
+  CacheEnDis = FamilyServices->InitCacheDisabled;
+
+  // Determine if the current core has the primary core role.  The first core to execute
+  // in each compute unit has the primary role.
+  PrimaryCore = (UINT32) IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, StdHeader);
+
+  // Aggregate the flags for the halt service.
+  HaltFlags = PrimaryCore | (CacheEnDis << 1);
+
+  ApUtilWriteControlByte (CORE_UNAVAILABLE, StdHeader);
+  ExecuteFinalHltInstruction (HaltFlags, UserOptions.CfgApMtrrSettingsList, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Reads the APIC register on the designated remote core.
+ *
+ * This function uses the remote read inter-processor interrupt protocol
+ * to read an APIC register from the remote core
+ *
+ * @param[in]        TargetApicId  Local APIC ID of the desired core
+ * @param[in]        RegAddr       APIC register to read
+ * @param[in]        StdHeader     Configuration parameters pointer
+ *
+ * @return           The current value of the remote core's desired APIC register
+ *
+ */
+UINT32
+STATIC
+ApUtilRemoteRead (
+  IN       UINT32            TargetApicId,
+  IN       UINT8             RegAddr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 ApicRegister;
+  UINT64 ApicBase;
+  UINT64 ApicAddr;
+
+  ApUtilGetLocalApicBase (&ApicBase, StdHeader);
+  TargetApicId <<= LOCAL_APIC_ID;
+
+  do {
+    ApicAddr = ApicBase + APIC_CMD_HI_REG;
+    LibAmdMemWrite (AccessWidth32, ApicAddr, &TargetApicId, StdHeader);
+    ApicAddr = ApicBase + APIC_CMD_LO_REG;
+    ApicRegister = CMD_REG_TO_READ | (UINT32) RegAddr;
+    LibAmdMemWrite (AccessWidth32, ApicAddr, &ApicRegister, StdHeader);
+    do {
+      LibAmdMemRead (AccessWidth32, ApicAddr, &ApicRegister, StdHeader);
+    } while ((ApicRegister & CMD_REG_DELIVERY_STATUS) != 0);
+    while ((ApicRegister & CMD_REG_REMOTE_RD_STS_MSK) == CMD_REG_REMOTE_DELIVERY_PENDING) {
+      LibAmdMemRead (AccessWidth32, ApicAddr, &ApicRegister, StdHeader);
+    }
+  } while ((ApicRegister & CMD_REG_REMOTE_RD_STS_MSK) != CMD_REG_REMOTE_DELIVERY_DONE);
+  ApicAddr = ApicBase + APIC_REMOTE_READ_REG;
+  LibAmdMemRead (AccessWidth32, ApicAddr, &ApicRegister, StdHeader);
+  return (ApicRegister);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Writes an APIC register on the executing core.
+ *
+ * This function gets the base address of the executing core's local APIC,
+ * and writes a UINT32 value to a specified offset.
+ *
+ * @param[in]      RegAddr      APIC register to write to
+ * @param[in]      Value        Data to be written to the desired APIC register
+ * @param[in]      StdHeader    Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilLocalWrite (
+  IN       UINT32 RegAddr,
+  IN       UINT32 Value,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 ApicAddr;
+
+  ApUtilGetLocalApicBase (&ApicAddr, StdHeader);
+  ApicAddr += RegAddr;
+
+  LibAmdMemWrite (AccessWidth32, ApicAddr, &Value, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Reads an APIC register on the executing core.
+ *
+ * This function gets the base address of the executing core's local APIC,
+ * and reads a UINT32 value from a specified offset.
+ *
+ * @param[in]      RegAddr      APIC register to read from
+ * @param[in]      StdHeader    Configuration parameters pointer
+ *
+ * @return         The current value of the local APIC register
+ *
+ */
+UINT32
+STATIC
+ApUtilLocalRead (
+  IN       UINT32  RegAddr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 ApicRegister;
+  UINT64 ApicAddr;
+
+  ApUtilGetLocalApicBase (&ApicAddr, StdHeader);
+  ApicAddr += RegAddr;
+  LibAmdMemRead (AccessWidth32, ApicAddr, &ApicRegister, StdHeader);
+
+  return (ApicRegister);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the 64-bit base address of the executing core's local APIC.
+ *
+ * This function reads the APICBASE MSR and isolates the programmed address.
+ *
+ * @param[out]     ApicBase     Base address
+ * @param[in]      StdHeader    Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilGetLocalApicBase (
+     OUT   UINT64 *ApicBase,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  LibAmdMsrRead (MSR_APIC_BAR, ApicBase, StdHeader);
+  *ApicBase &= LAPIC_BASE_ADDR_MASK;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determines the unique ID of the input Socket/Core.
+ *
+ * This routine converts a socket-core combination to to a number
+ * that will be used to directly address a particular core.  This
+ * unique value must be less than 128 because we only have a byte
+ * to use for status.  APIC IDs are not guaranteed to be below
+ * 128.
+ *
+ * @param[in]      Socket       Socket number of the remote core
+ * @param[in]      Core         Core number of the remote core
+ * @param[in]      StdHeader    Configuration parameters pointer
+ *
+ * @return         The unique ID of the desired core
+ *
+ */
+UINT8
+STATIC
+ApUtilCalculateUniqueId (
+  IN       UINT8 Socket,
+  IN       UINT8 Core,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 UniqueId;
+
+  UniqueId = ((Core << 3) | Socket);
+  ASSERT ((UniqueId & 0x80) == 0);
+  return (UniqueId);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Wakes up a core from the halted state.
+ *
+ * This function sends a directed NMI inter-processor interrupt to
+ * the input Socket/Core.
+ *
+ * @param[in]      TargetApicId    Local APIC ID of the desired core
+ * @param[in]      StdHeader       Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilFireDirectedNmi (
+  IN       UINT32 TargetApicId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  TargetApicId <<= LOCAL_APIC_ID;
+
+  ApUtilLocalWrite ((UINT32) APIC_CMD_HI_REG, TargetApicId, StdHeader);
+  ApUtilLocalWrite ((UINT32) APIC_CMD_LO_REG, (UINT32) CMD_REG_TO_NMI, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Securely receives a pointer from the designated remote core.
+ *
+ * This function uses a sequence of remote reads to receive a pointer,
+ * one UINT32 at a time.
+ *
+ * @param[in]      TargetApicId  Local APIC ID of the desired core
+ * @param[out]     ReturnPointer Pointer passed from remote core
+ * @param[in]      StdHeader     Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilReceivePointer (
+  IN       UINT32 TargetApicId,
+     OUT   VOID  **ReturnPointer,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8   i;
+  UINT8   WaitStatus;
+  UINT32  *AddressScratchPtr;
+  AP_WAIT_FOR_STATUS WaitForStatus;
+
+  WaitStatus = CORE_STS_DATA_READY_0;
+  WaitForStatus.Status = &WaitStatus;
+  WaitForStatus.NumberOfElements = 1;
+  WaitForStatus.RetryCount = WAIT_INFINITELY;
+  AddressScratchPtr = (UINT32 *) ReturnPointer;
+  for (i = 0; i < SIZE_IN_DWORDS (AddressScratchPtr); ++i) {
+    ApUtilWriteControlByte (CORE_NEEDS_PTR, StdHeader);
+    WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+    ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+    *AddressScratchPtr++ = ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+    ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+    WaitForStatus.WaitForStatusFlags = 0;
+    ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Securely transmits a pointer to the designated remote core.
+ *
+ * This function uses a sequence of remote reads to transmit a pointer,
+ * one UINT32 at a time.
+ *
+ * @param[in]      TargetApicId  Local APIC ID of the desired core
+ * @param[out]     Pointer       Pointer passed from remote core
+ * @param[in]      StdHeader     Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilTransmitPointer (
+  IN       UINT32 TargetApicId,
+  IN       VOID  **Pointer,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8   i;
+  UINT8   WaitStatus;
+  UINT32  *AddressScratchPtr;
+  AP_WAIT_FOR_STATUS WaitForStatus;
+
+  WaitStatus = CORE_NEEDS_PTR;
+  WaitForStatus.Status = &WaitStatus;
+  WaitForStatus.NumberOfElements = 1;
+  WaitForStatus.RetryCount = WAIT_INFINITELY;
+
+  AddressScratchPtr = (UINT32 *) Pointer;
+
+  for (i = 0; i < SIZE_IN_DWORDS (AddressScratchPtr); i++) {
+    WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+    ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+    ApUtilWriteDataDword (*AddressScratchPtr++, StdHeader);
+    ApUtilWriteControlByte (CORE_STS_DATA_READY_0, StdHeader);
+    WaitForStatus.WaitForStatusFlags = 0;
+    ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+    ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuApicUtilities.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuApicUtilities.h
new file mode 100644
index 0000000000..464dcfb518
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuApicUtilities.h
@@ -0,0 +1,304 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU APIC related utility functions and structures
+ *
+ * Contains code that provides mechanism to invoke and control APIC communication.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 44393 $   @e \$Date: 2010-12-23 16:38:46 -0700 (Thu, 23 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_APIC_UTILITIES_H_
+#define _CPU_APIC_UTILITIES_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+#define APIC_CTRL_DWORD 0xF
+#define APIC_CTRL_REG (APIC_CTRL_DWORD << 4)
+#define APIC_CTRL_MASK 0xFF
+#define APIC_CTRL_SHIFT 0
+
+#define APIC_DATA_DWORD 0x38
+#define APIC_DATA_REG (APIC_DATA_DWORD << 4)
+
+#define APIC_REMOTE_READ_REG 0xC0
+#define APIC_CMD_LO_REG 0x300
+#define APIC_CMD_HI_REG 0x310
+
+// APIC_CMD_LO_REG bits
+#define CMD_REG_DELIVERY_STATUS 0x1000
+#define CMD_REG_TO_READ 0x300
+#define CMD_REG_REMOTE_RD_STS_MSK 0x30000
+#define CMD_REG_REMOTE_DELIVERY_PENDING 0x10000
+#define CMD_REG_REMOTE_DELIVERY_DONE 0x20000
+#define CMD_REG_TO_NMI 0x400
+
+// ExeFlags bits
+#define WAIT_FOR_CORE     0x00000001
+#define TASK_HAS_OUTPUT   0x00000002
+#define RETURN_PARAMS     0x00000004
+#define END_AT_HLT        0x00000008
+#define PASS_EARLY_PARAMS 0x00000010
+
+// Control Byte Values
+// bit 7 indicates the type of message
+// 1 - control message
+// 0 - launch + APIC ID = message to go
+//
+#define CORE_UNAVAILABLE            0xFF
+#define CORE_IDLE                   0xFE
+#define CORE_IDLE_HLT               0xFD
+#define CORE_ACTIVE                 0xFC
+#define CORE_NEEDS_PTR              0xFB
+#define CORE_NEEDS_DATA_SIZE        0xFA
+#define CORE_STS_DATA_READY_1       0xF9
+#define CORE_STS_DATA_READY_0       0xF8
+#define CORE_DATA_FLAGS_READY       0xF7
+#define CORE_DATA_FLAGS_ACKNOWLEDGE 0xF6
+#define CORE_DATA_PTR_READY         0xF5
+
+// Macro used to determine the number of dwords to transmit to the AP as input
+#define SIZE_IN_DWORDS(sInput) ((UINT32) (((sizeof (sInput)) + 3) >> 2))
+
+// IDT table
+#define IDT_DESC_PRESENT     0x80
+
+#define IDT_DESC_TYPE_LDT    0x02
+#define IDT_DESC_TYPE_CALL16 0x04
+#define IDT_DESC_TYPE_TASK   0x05
+#define IDT_DESC_TYPE_INT16  0x06
+#define IDT_DESC_TYPE_TRAP16 0x07
+#define IDT_DESC_TYPE_CALL32 0x0C
+#define IDT_DESC_TYPE_INT32  0x0E
+#define IDT_DESC_TYPE_TRAP32 0x0F
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+typedef VOID (*PF_AP_TASK) (AMD_CONFIG_PARAMS *StdHeader);
+typedef VOID (*PF_AP_TASK_I) (VOID *, AMD_CONFIG_PARAMS *StdHeader);
+typedef VOID (*PF_AP_TASK_C) (AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *);
+typedef VOID (*PF_AP_TASK_IC) (VOID *, AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *);
+typedef UINT32 (*PF_AP_TASK_O) (AMD_CONFIG_PARAMS *StdHeader);
+typedef UINT32 (*PF_AP_TASK_IO) (VOID *, AMD_CONFIG_PARAMS *StdHeader);
+typedef UINT32 (*PF_AP_TASK_OC) (AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *);
+typedef UINT32 (*PF_AP_TASK_IOC) (VOID *, AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *);
+
+/// Function pointer union representing the eight different
+/// types of functions that an AP can be asked to perform.
+typedef union {
+  PF_AP_TASK     PfApTask;      ///< AMD_CONFIG_PARAMS *  input with no output
+  PF_AP_TASK_I   PfApTaskI;     ///< VOID * + AMD_CONFIG_PARAMS *  input with no output
+  PF_AP_TASK_C   PfApTaskC;     ///< AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS *  input with no output
+  PF_AP_TASK_IC  PfApTaskIC;    ///< VOID * + AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS *  input with no output
+  PF_AP_TASK_O   PfApTaskO;     ///< AMD_CONFIG_PARAMS * input with UINT32 output
+  PF_AP_TASK_IO  PfApTaskIO;    ///< VOID * + AMD_CONFIG_PARAMS * input with UINT32 output
+  PF_AP_TASK_OC  PfApTaskOC;    ///< AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with UINT32 output
+  PF_AP_TASK_IOC PfApTaskIOC;   ///< VOID * + AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS *  input with UINT32 output
+} AP_FUNCTION_PTR;
+
+/// Input structure for ApUtilTransmitBuffer and ApUtilReceiveBuffer
+/// containing information about the data transfer from one core
+/// to another.
+typedef struct {
+  IN OUT   UINT16 DataSizeInDwords;   ///< Size of the data to be transferred rounded up to the nearest dword
+  IN OUT   VOID   *DataPtr;           ///< Pointer to the data
+  IN       UINT32 DataTransferFlags;  ///< Flags dictating certain aspects of the data transfer
+} AP_DATA_TRANSFER;
+
+/// Input structure for ApUtilRunCodeOnSocketCore.
+typedef struct _AP_TASK {
+  AP_FUNCTION_PTR  FuncAddress;   ///< Pointer to the function that the AP will run
+  AP_DATA_TRANSFER DataTransfer;  ///< Data transfer struct for optionally passing data that the AP should use as input to the function
+  UINT32           ExeFlags;      ///< Flags dictating certain aspects of the AP tasking sequence
+} AP_TASK;
+
+/// Input structure for ApUtilWaitForCoreStatus.
+typedef struct {
+  IN       UINT8  *Status;            ///< Pointer to the 1st element of an array of values to wait for
+  IN       UINT8  NumberOfElements;   ///< Number of elements in the array
+  IN       UINT32 RetryCount;         ///< Number of remote read cycles to complete before quitting
+  IN       UINT32 WaitForStatusFlags; ///< Flags dictating certain aspects of ApUtilWaitForCoreStatus
+} AP_WAIT_FOR_STATUS;
+
+/// Interrupt Descriptor Table entry
+typedef struct {
+  UINT16 OffsetLo;     ///< Lower 16 bits of the interrupt handler routine's offset
+  UINT16 Selector;     ///< Interrupt handler routine's selector
+  UINT8  Rsvd;         ///< Reserved
+  UINT8  Flags;        ///< Interrupt flags
+  UINT16 OffsetHi;     ///< Upper 16 bits of the interrupt handler routine's offset
+  UINT32 Offset64;     ///< High order 32 bits of the handler's offset needed when in 64 bit mode
+  UINT32 Rsvd64;       ///< Reserved
+} IDT_DESCRIPTOR;
+
+/// Structure needed to load the IDTR using the lidt instruction
+typedef struct {
+  UINT16 Limit;        ///< Interrupt Descriptor Table size
+  UINT64 Base;         ///< Interrupt Descriptor Table base address
+} IDT_BASE_LIMIT;
+
+#define WAIT_STATUS_EQUALITY 0x00000001
+#define WAIT_INFINITELY 0
+
+// Data Transfer Flags
+#define DATA_IN_MEMORY 0x00000001
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+//                   These are   P U B L I C   functions, used by AGESA
+UINT8
+ApUtilReadRemoteControlByte (
+  IN       UINT32 TargetApicId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+ApUtilWriteControlByte (
+  IN       UINT8 Value,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT32
+ApUtilReadRemoteDataDword (
+  IN       UINT32 TargetApicId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+ApUtilWriteDataDword (
+  IN       UINT32 Value,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT32
+ApUtilRunCodeOnSocketCore (
+  IN       UINT8 Socket,
+  IN       UINT8 Core,
+  IN       AP_TASK *TaskPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT8
+ApUtilWaitForCoreStatus (
+  IN       UINT32 TargetApicId,
+  IN       AP_WAIT_FOR_STATUS *WaitParamsPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+ApEntry (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+  );
+
+UINT32
+ApUtilTaskOnExecutingCore (
+  IN       AP_TASK *TaskPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       VOID    *ConfigParams
+  );
+
+VOID
+ApUtilTransmitBuffer (
+  IN     UINT8   Socket,
+  IN     UINT8   Core,
+  IN     AP_DATA_TRANSFER *BufferInfo,
+  IN     AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+ApUtilReceiveBuffer (
+  IN       UINT8   Socket,
+  IN       UINT8   Core,
+  IN OUT   AP_DATA_TRANSFER  *BufferInfo,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+GetLocalApicIdForCore (
+  IN       UINT32 TargetSocket,
+  IN       UINT32 TargetCore,
+     OUT   UINT32 *LocalApicId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+ApUtilRunCodeOnAllLocalCoresAtEarly (
+  IN       AP_TASK *TaskPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+  );
+
+VOID
+RelinquishControlOfAllAPs (
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+VOID
+GetCsSelector (
+  IN       UINT16 *Selector,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+SetIdtr (
+  IN       IDT_BASE_LIMIT *IdtInfo,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+GetIdtr (
+  IN       IDT_BASE_LIMIT *IdtInfo,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+#endif  /* _CPU_APIC_UTILITIES_H_ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuBist.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuBist.c
new file mode 100644
index 0000000000..95c4d7f817
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuBist.c
@@ -0,0 +1,172 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BIST Status Check Implementation.
+ *
+ * Implement CPU BIST Status checking
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                            M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuApicUtilities.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_CPUBIST_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+UINT32
+STATIC
+GetBistResults (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+ /*----------------------------------------------------------------------------------------
+  *                          E X P O R T E D    F U N C T I O N S
+  *----------------------------------------------------------------------------------------
+ */
+
+ /*---------------------------------------------------------------------------------------*/
+ /**
+  *
+  * This function checks the status of BIST and places the error status in the event log
+  * if there are any errors
+  *
+  * @param[in]      StdHeader              Header for library and services
+  *
+  * @retval         AGESA_SUCCESS          No BIST errors have been logged.
+  * @retval         AGESA_ALERT            BIST errors have been detected and added to the
+  *                                        event log.
+  */
+AGESA_STATUS
+CheckBistStatus (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32                Socket;
+  UINT32                Core;
+  UINT32                BscSocket;
+  UINT32                BscCoreNum;
+  UINT32                NumberOfSockets;
+  UINT32                NumberOfCores;
+  UINT32                Ignored;
+  UINT32                ReturnCode;
+  AGESA_STATUS          IgnoredSts;
+  AGESA_STATUS          AgesaStatus;
+  AP_TASK               TaskPtr;
+
+  // Make sure that Standard Header is valid
+  ASSERT (StdHeader != NULL);
+  ASSERT (IsBsp (StdHeader, &IgnoredSts));
+
+  AgesaStatus = AGESA_SUCCESS;
+
+  // Get the BscSocket, BscCoreNum and NumberOfSockets in the system
+  IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  // Setup TaskPtr struct to execute routine on APs
+  TaskPtr.FuncAddress.PfApTaskO = GetBistResults;
+  TaskPtr.DataTransfer.DataSizeInDwords = 0;
+  TaskPtr.ExeFlags = TASK_HAS_OUTPUT | WAIT_FOR_CORE;
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+      for (Core = 0; Core < NumberOfCores; Core++) {
+        if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+          ReturnCode = ApUtilRunCodeOnSocketCore ((UINT8)Socket, (UINT8)Core, &TaskPtr, StdHeader);
+        } else {
+          ReturnCode = TaskPtr.FuncAddress.PfApTaskO (StdHeader);
+        }
+
+        // If BIST value is non-zero, add to BSP's event log
+        if (ReturnCode != 0) {
+          IDS_HDT_CONSOLE (CPU_TRACE, "  BIST failure: socket %d core %d, status = 0x%x\n", Socket, Core, ReturnCode);
+          AgesaStatus = AGESA_ALERT;
+          PutEventLog (AGESA_ALERT,
+                       CPU_EVENT_BIST_ERROR,
+                       ReturnCode, Socket, Core, 0, StdHeader);
+        }
+      }
+    }
+  }
+
+  return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------
+ *                          L O C A L          F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+*/
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Reads the lower 32 bits of the BIST register
+ *
+ * @param[in]      StdHeader              Header for library and services
+ *
+ * @retval         Value of the BIST register
+*/
+UINT32
+STATIC
+GetBistResults (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64   BistResults;
+
+  // Read MSRC001_0060 BIST Results Register
+  LibAmdMsrRead (MSR_BIST, &BistResults, StdHeader);
+
+  return (UINT32) (BistResults & 0xFFFFFFFF);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuBrandId.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuBrandId.c
new file mode 100644
index 0000000000..2d5f1df177
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuBrandId.c
@@ -0,0 +1,313 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BrandId related functions.
+ *
+ * Contains code that provides CPU BrandId information
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionPstate.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuEarlyInit.h"
+#include "cpuRegisters.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_CPUBRANDID_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+CONST CHAR8 ROMDATA strEngSample[] = "AMD Engineering Sample";
+CONST CHAR8 ROMDATA strTtkSample[] = "AMD Thermal Test Kit";
+CONST CHAR8 ROMDATA strUnknown[] = "AMD Processor Model Unknown";
+
+CONST AMD_CPU_BRAND ROMDATA EngSample_Str = {0, 0, 0, SOCKET_IGNORE, strEngSample, sizeof (strEngSample)};
+CONST AMD_CPU_BRAND ROMDATA TtkSample_Str = {0, 1, 0, SOCKET_IGNORE, strTtkSample, sizeof (strTtkSample)};
+CONST AMD_CPU_BRAND ROMDATA Dflt_Str1 = {0, 0, 0, SOCKET_IGNORE, strUnknown, sizeof (strUnknown)};
+CONST AMD_CPU_BRAND ROMDATA Dflt_Str2 = {0, 0, 0, SOCKET_IGNORE, DR_NO_STRING, DR_NO_STRING};
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+SetBrandIdRegistersAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Program BrandID registers (CPUIDNameStringPtr[0-5])
+ *
+ * This function determines the appropriate brand string for the executing
+ * core, and programs the namestring MSRs.
+ *
+ * @param[in,out] StdHeader   Config handle for library and services.
+ *
+ */
+VOID
+SetBrandIdRegisters (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8   SocketIndex;
+  UINT8   SuffixStatus;
+  UINT8   TableElements;
+  UINT8   TableEntryCount;
+  UINT8   TableEntryIndex;
+  CHAR8   TempChar;
+  CHAR8   *NameStringPtr;
+  CHAR8   *SuffixStringPtr;
+  CHAR8   *BrandStringPtr;
+  CHAR8   *TempNameCharPtr;
+  UINT32  MsrIndex;
+  UINT32  Quotient;
+  UINT32  Remainder;
+  UINT64  *MsrNameStringPtrPtr;
+  CPUID_DATA    CpuId;
+  CPU_LOGICAL_ID CpuLogicalId;
+  CPU_BRAND_TABLE *SocketTableEntry;
+  CPU_BRAND_TABLE **SocketTableEntry1;
+  AMD_CPU_BRAND *SocketTablePtr;
+  AMD_CPU_BRAND_DATA Data;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  SuffixStatus = 0;
+  FamilySpecificServices = NULL;
+  SocketTablePtr = NULL;
+  SocketTableEntry = NULL;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  // Step1: Allocate 48 bytes from Heap space
+  AllocHeapParams.RequestedBufferSize = CPU_BRAND_ID_LENGTH;
+  AllocHeapParams.BufferHandle = AMD_BRAND_ID_BUFFER_HANDLE;
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+    // Clear NameBuffer
+    BrandStringPtr = (CHAR8 *) AllocHeapParams.BufferPtr;
+    LibAmdMemFill (BrandStringPtr, 0, CPU_BRAND_ID_LENGTH, StdHeader);
+  } else {
+    PutEventLog (
+      AGESA_ERROR,
+      CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE,
+      0, 0, 0, 0, StdHeader
+      );
+    return;
+  }
+
+  // Step2: Get brandid from model number and model string
+  LibAmdCpuidRead (AMD_CPUID_FMF, &CpuId, StdHeader);
+
+  // Step3: Figure out Socket/Page/Model/String1/String2/Core Number
+  Data.String2 = (UINT8) (CpuId.EBX_Reg & 0x0f);
+  Data.Model   = (UINT8) ((CpuId.EBX_Reg >> 4) & 0x7f);
+  Data.String1 = (UINT8) ((CpuId.EBX_Reg >> 11) & 0x0f);
+  Data.Page    = (UINT8) ((CpuId.EBX_Reg >> 15) & 0x01);
+  Data.Socket  = (UINT8) ((CpuId.EBX_Reg >> 28) & 0x0f);
+  Data.Cores = FamilySpecificServices->GetNumberOfPhysicalCores (FamilySpecificServices, StdHeader);
+
+  // Step4: If NN = 0, we have an engineering sample, no suffix; then jump to Step6
+  if (Data.Model == 0) {
+    if (Data.Page == 0) {
+      SocketTablePtr = (AMD_CPU_BRAND *)&EngSample_Str;
+    } else {
+      SocketTablePtr = (AMD_CPU_BRAND *)&TtkSample_Str;
+    }
+  } else {
+
+    // Model is not equal to zero, so decrement it
+    // For family 10 if PkgType[3:0] is greater than or equal to 2h and families >= 12h
+    GetLogicalIdOfCurrentCore (&CpuLogicalId, StdHeader);
+    if ((((CpuLogicalId.Family & AMD_FAMILY_10) != 0) && (Data.Socket >= DR_SOCKET_S1G3)) ||
+        ((CpuLogicalId.Family & AMD_FAMILY_GE_12) != 0)) {
+      Data.Model--;
+    }
+
+    // Step5: Search for String1 (there can be only 1)
+    FamilySpecificServices->GetBrandString1 (FamilySpecificServices, (const VOID **) &SocketTableEntry, &TableEntryCount, StdHeader);
+    SocketTableEntry1 = (CPU_BRAND_TABLE **) SocketTableEntry;
+    for (TableEntryIndex = 0; ((TableEntryIndex < TableEntryCount)
+         && (SuffixStatus == 0)); TableEntryIndex++, SocketTableEntry1++) {
+      if (*SocketTableEntry1 == NULL) {
+        break;
+      }
+      SocketTablePtr = (AMD_CPU_BRAND *) (*SocketTableEntry1)->Table;
+      TableElements = (*SocketTableEntry1)->NumberOfEntries;
+      for (SocketIndex = 0; (SocketIndex < TableElements)
+           && SuffixStatus == 0; SocketIndex++) {
+        if ((SocketTablePtr->Page == Data.Page) &&
+            (SocketTablePtr->Index == Data.String1) &&
+            (SocketTablePtr->Socket == Data.Socket) &&
+            (SocketTablePtr->Cores == Data.Cores)) {
+          SuffixStatus = 1;
+        } else {
+          SocketTablePtr++;
+        }
+      }
+    }
+    if (SuffixStatus == 0) {
+      SocketTablePtr = (AMD_CPU_BRAND *)&Dflt_Str1;  // We did not find one, make 'Unknown'
+    }
+  }
+
+  // Step6: Copy String into NameBuffer
+  // We now have data structure pointing to correct type in (*SocketTablePtr)
+  LibAmdMemCopy  (BrandStringPtr,
+                  (CHAR8 *)SocketTablePtr->Stringstart,
+                  SocketTablePtr->Stringlength,
+                  StdHeader);
+
+  // Step7: Get suffix, determine addition to BRANDSPEED
+  if (SuffixStatus != 0) {
+    // Turn our value into a decimal string
+    // We have a value like 37d which we need to turn into '3' '7'
+    // Divide by 10, store remainder as an ASCII char on stack, repeat until Quotient is 0
+    NameStringPtr = BrandStringPtr + SocketTablePtr->Stringlength - 1;
+    TempNameCharPtr = NameStringPtr;
+    Quotient = Data.Model;
+    do {
+      Remainder = Quotient % 10;
+      Quotient = Quotient / 10;
+      *TempNameCharPtr++ = (CHAR8) (Remainder + '0');   // Put suffix into our NameBuffer
+    } while (Quotient != 0);
+    if (Data.Model < 10) {
+      *TempNameCharPtr++ = '0';
+    }
+
+    // Step8: Reverse the string sequence and copy into NameBuffer
+    SuffixStringPtr = TempNameCharPtr--;
+    while (NameStringPtr < TempNameCharPtr) {
+      TempChar = *NameStringPtr;
+      *NameStringPtr = *TempNameCharPtr;
+      *TempNameCharPtr = TempChar;
+      NameStringPtr++;
+      TempNameCharPtr--;
+    }
+
+    // Step9: Search for String2
+    SuffixStatus = 0;
+    FamilySpecificServices->GetBrandString2 (FamilySpecificServices, (const VOID **) &SocketTableEntry, &TableEntryCount, StdHeader);
+    SocketTableEntry1 = (CPU_BRAND_TABLE **) SocketTableEntry;
+    for (TableEntryIndex = 0; ((TableEntryIndex < TableEntryCount)
+         && (SuffixStatus == 0)); TableEntryIndex++, SocketTableEntry1++) {
+      if (*SocketTableEntry1 == NULL) {
+        break;
+      }
+      SocketTablePtr = (AMD_CPU_BRAND *) (*SocketTableEntry1)->Table;
+      TableElements = (*SocketTableEntry1)->NumberOfEntries;
+      for (SocketIndex = 0; (SocketIndex < TableElements)
+           && SuffixStatus == 0; SocketIndex++) {
+        if ((SocketTablePtr->Page == Data.Page) &&
+            (SocketTablePtr->Index == Data.String2) &&
+            (SocketTablePtr->Socket == Data.Socket) &&
+            (SocketTablePtr->Cores == Data.Cores)) {
+          SuffixStatus = 1;
+        } else {
+          SocketTablePtr++;
+        }
+      }
+    }
+    if (SuffixStatus == 0) {
+      SocketTablePtr = (AMD_CPU_BRAND *)&Dflt_Str2;
+    }
+
+    // Step10: Copy String2 into our NameBuffer
+    if (SocketTablePtr->Stringlength != 0) {
+      LibAmdMemCopy (SuffixStringPtr,
+                      (CHAR8 *)SocketTablePtr->Stringstart,
+                      SocketTablePtr->Stringlength,
+                      StdHeader);
+    }
+  }
+
+  // Step11: Put values into name MSRs,  Always write the full 48 bytes
+  MsrNameStringPtrPtr = (UINT64 *) BrandStringPtr;
+  for (MsrIndex = MSR_CPUID_NAME_STRING0; MsrIndex <= MSR_CPUID_NAME_STRING5; MsrIndex++) {
+    LibAmdMsrWrite (MsrIndex, MsrNameStringPtrPtr, StdHeader);
+    MsrNameStringPtrPtr++;
+  }
+  HeapDeallocateBuffer (AMD_BRAND_ID_BUFFER_HANDLE, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Program BrandID registers (CPUIDNameStringPtr[0-5])
+ *
+ * This function acts as a wrapper for calling the SetBrandIdRegisters
+ * routine at AmdInitEarly.
+ *
+ *  @param[in]   FamilyServices      The current Family Specific Services.
+ *  @param[in]   EarlyParams         Service parameters.
+ *  @param[in]   StdHeader           Config handle for library and services.
+ *
+ */
+VOID
+SetBrandIdRegistersAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  AGESA_TESTPOINT (TpProcCpuSetBrandID, StdHeader);
+  SetBrandIdRegisters (StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEarlyInit.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEarlyInit.c
new file mode 100644
index 0000000000..60e460ff7e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEarlyInit.c
@@ -0,0 +1,411 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Reset API, and related functions.
+ *
+ * Contains code that initialized the CPU after early reset.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "Table.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "Topology.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_CPUEARLYINIT_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+GetPerformEarlyFlag (
+  IN OUT   UINT32   *PerformEarlyFlag,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+McaInitializationAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that will be invoked by AmdCpuEarly to initialize the input
+ * structure for the Cpu Init @ Early routine.
+ *
+ * @param[in]       StdHeader         Opaque handle to standard config header
+ * @param[in]       PlatformConfig    Config handle for platform specific information
+ * @param[in,out]   CpuEarlyParamsPtr Service Interface structure to initialize.
+ *
+ * @retval          AGESA_SUCCESS     Always Succeeds
+ */
+VOID
+AmdCpuEarlyInitializer (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   AMD_CPU_EARLY_PARAMS   *CpuEarlyParamsPtr
+  )
+{
+  ASSERT (CpuEarlyParamsPtr != NULL);
+
+  CpuEarlyParamsPtr->MemInitPState = (UINT8) UserOptions.CfgMemInitPstate;
+  CpuEarlyParamsPtr->PlatformConfig = *PlatformConfig;
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Performs CPU related initialization at the early entry point
+ *
+ * This function performs a large list of initialization items.  These items
+ * include:
+ *
+ *    -1      local APIC initialization
+ *    -2      MSR table initialization
+ *    -3      PCI table initialization
+ *    -4      HT Phy PCI table initialization
+ *    -5      microcode patch loading
+ *    -6      namestring determination/programming
+ *    -7      AP initialization
+ *    -8      power management initialization
+ *    -9      core leveling
+ *
+ * This routine must be run by all cores in the system.  Please note that
+ * all APs that enter will never exit.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ * @param[in]  PlatformConfig    Config handle for platform specific information
+ *
+ * @retval     AGESA_SUCCESS
+ *
+ */
+AGESA_STATUS
+AmdCpuEarly (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig
+  )
+{
+  UINT8         WaitStatus;
+  UINT8         i;
+  UINT8         StartCore;
+  UINT8         EndCore;
+  UINT32        NodeNum;
+  UINT32        PrimaryCore;
+  UINT32        SocketNum;
+  UINT32        ModuleNum;
+  UINT32        HighCore;
+  UINT32        ApHeapIndex;
+  UINT32        CurrentPerformEarlyFlag;
+  UINT32        TargetApicId;
+  AP_WAIT_FOR_STATUS WaitForStatus;
+  AGESA_STATUS  Status;
+  AGESA_STATUS  CalledStatus;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  AMD_CPU_EARLY_PARAMS CpuEarlyParams;
+  S_PERFORM_EARLY_INIT_ON_CORE *EarlyTableOnCore;
+
+  Status = AGESA_SUCCESS;
+  CalledStatus = AGESA_SUCCESS;
+
+  AmdCpuEarlyInitializer (StdHeader, PlatformConfig, &CpuEarlyParams);
+
+  IDS_OPTION_HOOK (IDS_CPU_Early_Override, &CpuEarlyParams, StdHeader);
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  EarlyTableOnCore = NULL;
+  FamilySpecificServices->GetEarlyInitOnCoreTable (FamilySpecificServices, (const S_PERFORM_EARLY_INIT_ON_CORE **)&EarlyTableOnCore, &CpuEarlyParams, StdHeader);
+  if (EarlyTableOnCore != NULL) {
+    GetPerformEarlyFlag (&CurrentPerformEarlyFlag, StdHeader);
+    for (i = 0; EarlyTableOnCore[i].PerformEarlyInitOnCore != NULL; i++) {
+      if ((EarlyTableOnCore[i].PerformEarlyInitFlag & CurrentPerformEarlyFlag) != 0) {
+        IDS_HDT_CONSOLE (CPU_TRACE, "  Perform core init step %d\n", i);
+        EarlyTableOnCore[i].PerformEarlyInitOnCore (FamilySpecificServices, &CpuEarlyParams, StdHeader);
+      }
+    }
+  }
+
+  // B S P    C O D E    T O    I N I T I A L I Z E    A Ps
+  // -------------------------------------------------------
+  // -------------------------------------------------------
+  // IMPORTANT: Here we determine if we are BSP or AP
+  if (IsBsp (StdHeader, &CalledStatus)) {
+
+    // Even though the bsc does not need to send itself a heap index, this sequence performs other important initialization.
+    // Use '0' as a dummy heap index value.
+    GetSocketModuleOfNode (0, &SocketNum, &ModuleNum, StdHeader);
+    GetCpuServicesOfSocket (SocketNum, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+    FamilySpecificServices->SetApCoreNumber (FamilySpecificServices, SocketNum, ModuleNum, 0, StdHeader);
+    FamilySpecificServices->TransferApCoreNumber (FamilySpecificServices, StdHeader);
+
+    // Clear BSP's Status Byte
+    ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+
+    NodeNum = 0;
+    ApHeapIndex = 1;
+    while (NodeNum < MAX_NODES &&
+          GetSocketModuleOfNode (NodeNum, &SocketNum, &ModuleNum, StdHeader)) {
+      GetCpuServicesOfSocket (SocketNum, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+      GetGivenModuleCoreRange (SocketNum, ModuleNum, &PrimaryCore, &HighCore, StdHeader);
+      if (NodeNum == 0) {
+        StartCore = (UINT8) PrimaryCore + 1;
+      } else {
+        StartCore = (UINT8) PrimaryCore;
+      }
+
+      EndCore = (UINT8) HighCore;
+      for (i = StartCore; i <= EndCore; i++) {
+        FamilySpecificServices->SetApCoreNumber (FamilySpecificServices, SocketNum, ModuleNum, ApHeapIndex, StdHeader);
+        IDS_HDT_CONSOLE (CPU_TRACE, "  Launch socket %d core %d\n", SocketNum, i);
+        if (FamilySpecificServices->LaunchApCore (FamilySpecificServices, SocketNum, ModuleNum, i, PrimaryCore, StdHeader)) {
+          IDS_HDT_CONSOLE (CPU_TRACE, "  Waiting for socket %d core %d\n", SocketNum, i);
+          GetLocalApicIdForCore (SocketNum, i, &TargetApicId, StdHeader);
+          WaitStatus = CORE_IDLE;
+          WaitForStatus.Status = &WaitStatus;
+          WaitForStatus.NumberOfElements = 1;
+          WaitForStatus.RetryCount = WAIT_INFINITELY;
+          WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+          ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+          ApHeapIndex++;
+        }
+      }
+      NodeNum++;
+    }
+
+    // B S P    P h a s e - 1   E N D
+
+    IDS_OPTION_HOOK (IDS_BEFORE_PM_INIT, &CpuEarlyParams, StdHeader);
+
+    AGESA_TESTPOINT (TpProcCpuBeforePMFeatureInit, StdHeader);
+    IDS_HDT_CONSOLE (CPU_TRACE, "  Dispatch CPU features before early power mgmt init\n");
+    CalledStatus = DispatchCpuFeatures (CPU_FEAT_BEFORE_PM_INIT, PlatformConfig, StdHeader);
+    if (CalledStatus > Status) {
+      Status = CalledStatus;
+    }
+
+    AGESA_TESTPOINT (TpProcCpuPowerMgmtInit, StdHeader);
+    CalledStatus = PmInitializationAtEarly (&CpuEarlyParams, StdHeader);
+    if (CalledStatus > Status) {
+      Status = CalledStatus;
+    }
+
+    AGESA_TESTPOINT (TpProcCpuEarlyFeatureInit, StdHeader);
+    IDS_HDT_CONSOLE (CPU_TRACE, "  Dispatch CPU features after early power mgmt init\n");
+    CalledStatus = DispatchCpuFeatures (CPU_FEAT_AFTER_PM_INIT, PlatformConfig, StdHeader);
+
+    IDS_OPTION_HOOK (IDS_BEFORE_AP_EARLY_HALT, &CpuEarlyParams, StdHeader);
+
+    // Sleep all APs
+    IDS_HDT_CONSOLE (CPU_TRACE, "  Halting all APs\n");
+    ApUtilWriteControlByte (CORE_IDLE_HLT, StdHeader);
+  } // if (amdIsBsp()) - END
+  else {
+    ApEntry (StdHeader, &CpuEarlyParams);
+  }
+
+  if (CalledStatus > Status) {
+    Status = CalledStatus;
+  }
+
+  return (Status);
+}
+
+/*---------------------------------------------------------------------------------------
+ *                           L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initialize Machine Check Architecture registers
+ *
+ * This function initializes the MCA MSRs.  On cold reset, these registers
+ * have an invalid data that must be cleared on all cores.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+McaInitialization (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT16      TempVar16_a;
+  UINT32      MsrAddress;
+  UINT64      MsrData;
+  CPUID_DATA  CpuIdDataStruct;
+
+  if (!(IsWarmReset (StdHeader))) {
+    // Run CPUID to verify that the processor supports MCE and MCA
+    // i.e. edx[7], and edx[14]
+    // CPUID_MODEL = 1
+    LibAmdCpuidRead (1, &CpuIdDataStruct, StdHeader);
+    if ((CpuIdDataStruct.EDX_Reg & 0x4080) != 0) {
+      // Check to see if the MCG_CTL_P bit is set
+      // MCG = Global Machine Check Exception Reporting Control Register
+      LibAmdMsrRead (MSR_MCG_CAP, &MsrData, StdHeader);
+      if ((MsrData & MCG_CTL_P) != 0) {
+        TempVar16_a = (UINT16) ((MsrData & 0x000000FF) << 2);
+        TempVar16_a += MSR_MC0_CTL;
+
+        // Initialize the data
+        MsrData = 0;
+        for (MsrAddress = MSR_MC0_CTL; MsrAddress < TempVar16_a; MsrAddress++) {
+          LibAmdMsrWrite (MsrAddress, &MsrData, StdHeader);
+        }
+      }
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initialize Machine Check Architecture registers
+ *
+ * This function acts as a wrapper for calling the McaInitialization
+ * routine at AmdInitEarly.
+ *
+ *  @param[in]   FamilyServices      The current Family Specific Services.
+ *  @param[in]   EarlyParams         Service parameters.
+ *  @param[in]   StdHeader           Config handle for library and services.
+ *
+ */
+VOID
+McaInitializationAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  McaInitialization (StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Runs the given task on all cores (including self) on the socket of the executing
+ * core 0.
+ *
+ * This function is used to invoke all APs on the socket of the executing core 0 to
+ * run a specified AGESA procedure.
+ *
+ * @param[in]  TaskPtr      Function descriptor
+ * @param[in]  StdHeader    Config handle for library and services
+ * @param[in]  CpuEarlyParamsPtr Required input parameters for early CPU initialization
+ *
+ */
+VOID
+ApUtilRunCodeOnAllLocalCoresAtEarly (
+  IN       AP_TASK *TaskPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+  )
+{
+  UINT32 Core;
+  UINT32 Socket;
+  UINT32 IgnoredModule;
+  UINT32 IgnoredCore;
+  UINT32 ActiveCores;
+  AGESA_STATUS IgnoredSts;
+
+  IdentifyCore (StdHeader, &Socket, &IgnoredModule, &IgnoredCore, &IgnoredSts);
+  GetActiveCoresInCurrentSocket (&ActiveCores, StdHeader);
+
+  for (Core = 1; Core < (UINT8) ActiveCores; ++Core) {
+    ApUtilRunCodeOnSocketCore ((UINT8)Socket, (UINT8)Core, TaskPtr, StdHeader);
+  }
+  ApUtilTaskOnExecutingCore (TaskPtr, StdHeader, (VOID *) CpuEarlyParamsPtr);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get current condition, such as warm/cold reset, to determine if related function
+ * need to be performed at early stage
+ *
+ *  @param[in, out]   PerformEarlyFlag      Perform early flag.
+ *  @param[in]        StdHeader             Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+GetPerformEarlyFlag (
+  IN OUT   UINT32   *PerformEarlyFlag,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  *PerformEarlyFlag = 0;
+  if (IsWarmReset (StdHeader)) {
+    *PerformEarlyFlag |= PERFORM_EARLY_WARM_RESET;
+  } else {
+    *PerformEarlyFlag |= PERFORM_EARLY_COLD_BOOT;
+  }
+  return;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEarlyInit.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEarlyInit.h
new file mode 100644
index 0000000000..c83fb07435
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEarlyInit.h
@@ -0,0 +1,305 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Reset API, and related functions and structures.
+ *
+ * Contains code that initialized the CPU after early reset.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_EARLY_INIT_H_
+#define _CPU_EARLY_INIT_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_FORWARD_DECLARATION (CPU_CORE_LEVELING_FAMILY_SERVICES);
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+//----------------------------------------------------------------------------
+//                         CPU BRAND ID TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+#define CPU_BRAND_ID_LENGTH     48            // Total number of characters supported
+#define LOW_NODE_DEVICEID       24
+#define NB_CAPABILITIES         0xE8          //Function 3 Registers
+//----------------------------------------------------------------------------
+//                         CPU MICROCODE PATCH TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/* All lengths are in bytes */
+#define MICROCODE_TRIADE_SIZE           28
+#define MICROCODE_HEADER_LENGTH         64
+
+/**
+ * @page ucodeflag Microcode Patches Signature Guide
+ *
+ * We mark patches in the ROM with a signature so that they can be easily found
+ *
+ *   @anchor Microcode Patch Signature
+ *   @li @e  Microcode Patch Signature @n
+ *         Microcode patches are marked by adding a signature before patches in the ROM image to
+ *         help identify where they are located.
+ *         There're two kind of signatures. One is '$UCODE2K', it indicates there's a following patch with 2K size.
+ *         The other is '$UCODE4K', it indicates there's a following patch with 4K size.
+ *         If you want to know the patch level / equivalent ID, please consult the BKDG for patch header format.
+ *
+ *
+ */
+/// Microcode patch flag for replacement
+typedef struct {
+  IN       UINT8   MicrocodePatchesFlag[8];  ///< a flag followed by microcode
+} MICROCODE_PATCHES_FLAG;
+
+#define UCODE_2K_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', '2', 'K'}};
+#define UCODE_4K_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', '4', 'K'}};
+#define UCODE_VS_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', 'V', 'S'}};
+
+/* Offsets in UCODE PATCH Header */
+/* Note: Header is 64 bytes      */
+#define DATE_CODE_OFFSET                0   // 4 bytes
+#define PATCH_ID                        4   // 4 bytes
+#define MICROCODE_PATH_DATA_ID          8   // 2 bytes
+#define MICROCODE_PATCH_DATA_LENGTH     10  // 1 byte
+#define MICROCODE_PATCH_DATA_CHECKSUM   12  // 4 bytes
+#define CHIPSET_1_DEVICE_ID             16  // 4 bytes
+#define CHIPSET_2_DEVICE_ID             20  // 4 bytes
+#define PROCESSOR_REV_ID                24  // 2 bytes
+#define CHIPSET_1_REV_ID                26  // 1 byte
+#define CHIPSET_2_REV_ID                27  // 1 byte
+
+#define MICROCODE_PATCH_2K_SIZE    2048
+#define MICROCODE_PATCH_4K_SIZE    4096
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+//----------------------------------------------------------------------------
+//                         CPU BRAND ID TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// A structure representing BrandId[15:0] from
+/// CPUID Fn8000_0001_EBX
+typedef struct {
+  UINT8           String1:4;   ///< An index to a string value used to create the name string
+  UINT8           String2:4;   ///< An index to a string value used to create the name string
+  UINT8           Page:1;      ///< An index to the appropriate page for the String1, String2, and Model values
+  UINT8           Model:7;     ///< A field used to create the model number in the name string
+  UINT8           Socket:4;    ///< Specifies the package type
+  UINT8           Cores:4;     ///< Identifies how many physical cores are present
+} AMD_CPU_BRAND_DATA;
+
+/// A structure containing string1 and string2 values
+/// as well as information pertaining to their usage
+typedef struct {
+  IN       UINT8  Cores;              ///< Appropriate number of physical cores
+  IN       UINT8  Page;               ///< This string's page number
+  IN       UINT8  Index;              ///< String index
+  IN       UINT8  Socket;             ///< Package type information
+  IN       CONST CHAR8 *Stringstart;  ///< The literal string
+  IN       UINT8  Stringlength;       ///< Number of characters in the string
+} AMD_CPU_BRAND;
+
+/// An entire CPU brand table.
+typedef struct {
+  UINT8 NumberOfEntries;        ///< The number of entries in the table.
+  CONST AMD_CPU_BRAND  *Table;  ///< The table entries.
+} CPU_BRAND_TABLE;
+
+//----------------------------------------------------------------------------
+//                         CPU MICROCODE PATCH TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// Microcode patch field definitions
+typedef struct {
+  UINT32   DateCode;                   ///< Date of patch creation
+  UINT32   PatchID;                    ///< Patch level
+  UINT16   MicrocodePatchDataID;       ///< Internal use only
+  UINT8    MicrocodePatchDataLength;   ///< Internal use only
+  UINT8    InitializationFlag;         ///< Internal use only
+  UINT32   MicrocodePatchDataChecksum; ///< Doubleword sum of data block
+  UINT32   Chipset1DeviceID;           ///< Device ID of 1st HT device to match
+  UINT32   Chipset2DeviceID;           ///< Device ID of 2nd HT device to match
+  UINT16   ProcessorRevisionID;        ///< Equivalent ID
+  UINT8    Chipset1RevisionID;         ///< Revision level of 1st HT device to match
+  UINT8    Chipset2RevisionID;         ///< Revision level of 2nd HT device to match
+  UINT8    BiosApiRevision;            ///< BIOS INT 15 API revision required
+  UINT8    Reserved1[3];               ///< Reserved
+  UINT32   MatchRegister0;             ///< Internal use only
+  UINT32   MatchRegister1;             ///< Internal use only
+  UINT32   MatchRegister2;             ///< Internal use only
+  UINT32   MatchRegister3;             ///< Internal use only
+  UINT32   MatchRegister4;             ///< Internal use only
+  UINT32   MatchRegister5;             ///< Internal use only
+  UINT32   MatchRegister6;             ///< Internal use only
+  UINT32   MatchRegister7;             ///< Internal use only
+  UINT8    PatchDataBlock[896];        ///< Raw patch data
+  UINT8    Reserved2[896];             ///< Reserved
+  UINT8    X86CodePresent;             ///< Boolean to determine if executable code exists
+  UINT8    X86CodeEntry[191];          ///< Code to execute if X86CodePresent != 0
+} MICROCODE_PATCH;
+
+/// Two kilobyte array containing the raw
+/// microcode patch binary data
+typedef struct {
+  IN       UINT8   MicrocodePatches[MICROCODE_PATCH_2K_SIZE];  ///< 2k UINT8 elements
+} MICROCODE_PATCHES;
+
+/// Four kilobyte array containing the raw
+/// microcode patch binary data
+typedef struct {
+  IN       UINT8   MicrocodePatches[MICROCODE_PATCH_4K_SIZE];  ///< 4k UINT8 elements
+} MICROCODE_PATCHES_4K;
+
+/**
+ *  Set down core register
+ *
+ *  @CpuServiceInstances
+ *
+ * @param[in]      FamilySpecificServices  The current Family Specific Services.
+ * @param[in]      Socket        Socket ID.
+ * @param[in]      Module        Module ID in socket.
+ * @param[in]      LeveledCores  Number of core.
+ * @param[in]      CoreLevelMode Core level mode.
+ * @param[in]      StdHeader     Header for library and services.
+ *
+ * @retval         TRUE          Down Core register is updated.
+ * @retval         FALSE         Down Core register is not updated.
+ */
+typedef BOOLEAN (F_CPU_SET_DOWN_CORE_REGISTER) (
+  IN       CPU_CORE_LEVELING_FAMILY_SERVICES  *FamilySpecificServices,
+  IN       UINT32 *Socket,
+  IN       UINT32 *Module,
+  IN       UINT32 *LeveledCores,
+  IN       CORE_LEVELING_TYPE CoreLevelMode,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a method
+typedef F_CPU_SET_DOWN_CORE_REGISTER *PF_CPU_SET_DOWN_CORE_REGISTER;
+
+/**
+ * Provide the interface to the Core Leveling Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _CPU_CORE_LEVELING_FAMILY_SERVICES {             // See Forward Declaration above
+  UINT16          Revision;                             ///< Interface version
+  // Public Methods.
+  PF_CPU_SET_DOWN_CORE_REGISTER SetDownCoreRegister;    ///< Method: Set down core register.
+};
+
+//----------------------------------------------------------------------------
+//                         CPU PERFORM EARLY INIT ON CORE
+//
+//----------------------------------------------------------------------------
+/// Flag definition.
+#define PERFORM_EARLY_WARM_RESET    0x1        // bit 0 --- the related function needs to be run if it's warm reset
+#define PERFORM_EARLY_COLD_BOOT     0x2        // bit 1 --- the related function needs to be run if it's cold boot
+
+#define PERFORM_EARLY_ANY_CONDITION 0xFFFFFFFF // the related function always needs to be run
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+//                   These are   P U B L I C   functions, used by IBVs
+AGESA_STATUS
+AmdCpuEarly (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig
+  );
+
+//                   These are   P U B L I C   functions, used by AGESA
+VOID
+SetBrandIdRegisters (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+PmInitializationAtEarly (
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+BOOLEAN
+LoadMicrocodePatch (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+GetPatchEquivalentId (
+  IN OUT   UINT16             *ProcessorEquivalentId,
+  IN OUT   AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+BOOLEAN
+ValidateMicrocode (
+  IN       MICROCODE_PATCH    *MicrocodePatchPtr,
+  IN       UINT16             ProcessorEquivalentId,
+  IN OUT   AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+GetMicrocodeVersion (
+     OUT   UINT32             *pMicrocodeVersion,
+  IN OUT   AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+AmdCpuEarlyInitializer (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   AMD_CPU_EARLY_PARAMS   *CpuEarlyParamsPtr
+  );
+
+VOID
+McaInitialization (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+#endif  // _CPU_EARLY_INIT_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEnvInit.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEnvInit.h
new file mode 100644
index 0000000000..82c0328e4c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEnvInit.h
@@ -0,0 +1,74 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Env Init API functions Prototypes.
+ *
+ * Contains code for doing any Env CPU initialization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_ENV_INIT_H_
+#define _CPU_ENV_INIT_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+// HobTransfer
+AGESA_STATUS
+CopyHeapToMainRamAtPost (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+#endif // _CPU_ENV_INIT_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEventLog.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEventLog.c
new file mode 100644
index 0000000000..98d818c3de
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuEventLog.c
@@ -0,0 +1,397 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Event (Error) Log APIs, and related functions.
+ *
+ * Contains code that records and returns the events and errors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_CPUEVENTLOG_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define TOTAL_EVENT_LOG_BUFFERS  16
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * A wrapper for each Event Log entry.
+ */
+typedef struct {
+  UINT16      Count;         ///< Entry number
+  AGESA_EVENT AgesaEvent;    ///< The entry itself.
+} AGESA_EVENT_STRUCT;
+
+/**
+ * The Event Log.
+ */
+typedef struct {
+  UINT16        ReadWriteFlag;   ///< Read Write flag.
+  UINT16        Count;           ///< The total number of active entries.
+  UINT16        ReadRecordPtr;   ///< The next entry to read.
+  UINT16        WriteRecordPtr;  ///< The next entry to write.
+  AGESA_EVENT_STRUCT AgesaEventStruct[TOTAL_EVENT_LOG_BUFFERS];   ///< The entries.
+} AGESA_STRUCT_BUFFER;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+GetEventLogHeapPointer (
+     OUT  AGESA_STRUCT_BUFFER **EventLog,
+  IN      AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * External AGESA interface to read an Event from the Event Log.
+ *
+ * This is the implementation of the external AGESA interface entry, as a thin wrapper
+ * around the internal log services.
+ *
+ * @param[in]  Event           The event class, id, and any associated data.
+ *
+ * @retval     AGESA_SUCCESS   Always Succeeds.
+ */
+AGESA_STATUS
+AmdReadEventLog (
+  IN       EVENT_PARAMS *Event
+  )
+{
+  AGESA_EVENT  LogEvent;
+  AGESA_STATUS Status;
+
+  AGESA_TESTPOINT (TpIfAmdReadEventLogEntry, &Event->StdHeader);
+
+  ASSERT (Event != NULL);
+  Event->StdHeader.HeapBasePtr = HeapGetBaseAddress (&Event->StdHeader);
+  Status = GetEventLog (&LogEvent, &Event->StdHeader);
+
+  Event->EventClass = LogEvent.EventClass;
+  Event->EventInfo = LogEvent.EventInfo;
+  Event->DataParam1 = LogEvent.DataParam1;
+  Event->DataParam2 = LogEvent.DataParam2;
+  Event->DataParam3 = LogEvent.DataParam3;
+  Event->DataParam4 = LogEvent.DataParam4;
+
+  AGESA_TESTPOINT (TpIfAmdReadEventLogExit, &Event->StdHeader);
+  return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function prepares the Event Log for use.
+ *
+ * Allocate the memory for an event log on the heap.  Set the read pointer, write pointer,
+ * and count to reflect the log is empty.
+ *
+ * @param[in]  StdHeader      Our configuration, for passing to services.
+ *
+ * @retval      AGESA_SUCCESS     The event log is initialized.
+ * @retval      AGESA_ERROR       Allocate Heap Buffer returned an error.
+ *
+ */
+AGESA_STATUS
+EventLogInitialization (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  ALLOCATE_HEAP_PARAMS  AllocateHeapParams;
+  AGESA_STRUCT_BUFFER   *AgesaEventAlloc;
+  AGESA_STATUS          Status;
+
+  AllocateHeapParams.BufferHandle = EVENT_LOG_BUFFER_HANDLE;
+  AllocateHeapParams.RequestedBufferSize = sizeof (AGESA_STRUCT_BUFFER);
+  AllocateHeapParams.Persist = HEAP_SYSTEM_MEM;
+  Status = HeapAllocateBuffer (&AllocateHeapParams, StdHeader);
+  AgesaEventAlloc = (AGESA_STRUCT_BUFFER *) AllocateHeapParams.BufferPtr;
+  AgesaEventAlloc->Count = 0;
+  AgesaEventAlloc->ReadRecordPtr = 0;
+  AgesaEventAlloc->WriteRecordPtr = 0;
+  AgesaEventAlloc->ReadWriteFlag = 1;
+
+  return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function logs AGESA events into the event log.
+ *
+ * It will put the information in a circular buffer consisting of 16 such log
+ * entries. If the buffer gets full, then the next event log entry will be written
+ * over the oldest event log entry.
+ *
+ * @param[in]   EventClass   The severity of the event, its associated AGESA_STATUS.
+ * @param[in]   EventInfo    Uniquely identifies the event.
+ * @param[in]   DataParam1   Event specific additional data
+ * @param[in]   DataParam2   Event specific additional data
+ * @param[in]   DataParam3   Event specific additional data
+ * @param[in]   DataParam4   Event specific additional data
+ * @param[in]   StdHeader    Header for library and services
+ *
+ */
+VOID
+PutEventLog (
+  IN       AGESA_STATUS EventClass,
+  IN       UINT32 EventInfo,
+  IN       UINT32 DataParam1,
+  IN       UINT32 DataParam2,
+  IN       UINT32 DataParam3,
+  IN       UINT32 DataParam4,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT16 Index;
+  AGESA_STRUCT_BUFFER *AgesaEventAlloc;
+
+  IDS_HDT_CONSOLE (MAIN_FLOW, "\n * %s Event: %08x Data: %x, %x, %x, %x\n\n",
+                    (EventClass == AGESA_FATAL)       ? "FATAL"       :
+                    (EventClass == AGESA_CRITICAL)    ? "CRITICAL"    :
+                    (EventClass == AGESA_ERROR)       ? "ERROR"       :
+                    (EventClass == AGESA_WARNING)     ? "WARNING"     :
+                    (EventClass == AGESA_ALERT)       ? "ALERT"       :
+                    (EventClass == AGESA_BOUNDS_CHK)  ? "BOUNDS_CHK"  :
+                    (EventClass == AGESA_UNSUPPORTED) ? "UNSUPPORTED" :
+                    "SUCCESS", EventInfo, DataParam1, DataParam2, DataParam3, DataParam4);
+
+  AgesaEventAlloc = NULL;
+  GetEventLogHeapPointer (&AgesaEventAlloc, StdHeader);
+  ASSERT (AgesaEventAlloc != NULL);
+  Index = AgesaEventAlloc->WriteRecordPtr;
+
+  // Add the new event log data into a circular buffer
+  AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.EventClass = EventClass;
+  AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.EventInfo  = EventInfo;
+  AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam1 = DataParam1;
+  AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam2 = DataParam2;
+  AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam3 = DataParam3;
+  AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam4 = DataParam4;
+
+  if ((AgesaEventAlloc->WriteRecordPtr == AgesaEventAlloc->ReadRecordPtr) &&
+             (AgesaEventAlloc->ReadWriteFlag == 0)) {
+    AgesaEventAlloc->WriteRecordPtr += 1;
+    AgesaEventAlloc->ReadRecordPtr += 1;
+    if (AgesaEventAlloc->WriteRecordPtr == TOTAL_EVENT_LOG_BUFFERS) {
+      AgesaEventAlloc->WriteRecordPtr = 0;
+      AgesaEventAlloc->ReadRecordPtr  = 0;
+    }
+  } else {
+    AgesaEventAlloc->WriteRecordPtr += 1;
+    if (AgesaEventAlloc->WriteRecordPtr == TOTAL_EVENT_LOG_BUFFERS) {
+      AgesaEventAlloc->WriteRecordPtr = 0;
+    }
+    AgesaEventAlloc->ReadWriteFlag = 0;
+  }
+  AgesaEventAlloc->Count = AgesaEventAlloc->Count + 1;
+
+  if (AgesaEventAlloc->Count <= TOTAL_EVENT_LOG_BUFFERS) {
+    AgesaEventAlloc->AgesaEventStruct[Index].Count = Index;
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets event logs from the circular buffer.
+ *
+ * It will read the oldest entry from the circular buffer and place that information to the structure
+ * pointed to by the parameter. The read pointers will be incremented to remove the entry from buffer
+ * so that a subsequent call will return the next entry from the buffer. If the buffer is empty the
+ * returned log event will have EventInfo zero, which is not a valid event id.
+ *
+ * @param[out]  EventRecord    The next log event.
+ * @param[in]   StdHeader    Header for library and services
+ *
+ * @retval      AGESA_SUCCESS     Always succeeds.
+ *
+ */
+AGESA_STATUS
+GetEventLog (
+     OUT   AGESA_EVENT *EventRecord,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT16 Index;
+  AGESA_STRUCT_BUFFER *AgesaEventAlloc;
+
+  AgesaEventAlloc = NULL;
+
+  GetEventLogHeapPointer (&AgesaEventAlloc, StdHeader);
+  ASSERT (AgesaEventAlloc != NULL);
+
+  if ((AgesaEventAlloc->ReadRecordPtr == AgesaEventAlloc->WriteRecordPtr) &&
+      (AgesaEventAlloc->ReadWriteFlag == 1)) {
+    // EventInfo == zero, means no more data.
+    LibAmdMemFill (EventRecord, 0, sizeof (AGESA_EVENT), StdHeader);
+  } else {
+    Index = AgesaEventAlloc->ReadRecordPtr;
+    EventRecord->EventClass = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.EventClass;
+    EventRecord->EventInfo  = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.EventInfo;
+    EventRecord->DataParam1 = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam1;
+    EventRecord->DataParam2 = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam2;
+    EventRecord->DataParam3 = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam3;
+    EventRecord->DataParam4 = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam4;
+    if (AgesaEventAlloc->ReadRecordPtr == (TOTAL_EVENT_LOG_BUFFERS - 1)) {
+      AgesaEventAlloc->ReadRecordPtr = 0;
+    } else {
+      AgesaEventAlloc->ReadRecordPtr = AgesaEventAlloc->ReadRecordPtr + 1;
+    }
+    if (AgesaEventAlloc->ReadRecordPtr == AgesaEventAlloc->WriteRecordPtr) {
+      AgesaEventAlloc->ReadWriteFlag = 1;
+    }
+  }
+  return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets event logs from the circular buffer without flushing the entry.
+ *
+ * It will read the desired entry from the circular buffer and place that information to the structure
+ * pointed to by the parameter. The read pointers will not be incremented to remove the entry from the
+ * buffer. If the buffer is empty, or the desired entry does not exist, FALSE will be returned.
+ *
+ * @param[out]  EventRecord  The next log event.
+ * @param[in]   Index        Zero-based unread entry index
+ * @param[in]   StdHeader    Header for library and services
+ *
+ * @retval      TRUE         Entry exists
+ * @retval      FALSE        Entry does not exist
+ *
+ */
+BOOLEAN
+PeekEventLog (
+     OUT   AGESA_EVENT *EventRecord,
+  IN       UINT16 Index,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT16 ActualIndex;
+  UINT16 UnreadEntries;
+  AGESA_STRUCT_BUFFER *AgesaEventAlloc;
+
+  AgesaEventAlloc = NULL;
+
+  GetEventLogHeapPointer (&AgesaEventAlloc, StdHeader);
+  ASSERT (AgesaEventAlloc != NULL);
+
+  if ((AgesaEventAlloc->ReadRecordPtr == AgesaEventAlloc->WriteRecordPtr) &&
+      (AgesaEventAlloc->ReadWriteFlag == 1)) {
+    // EventInfo == zero, means no more data.
+    return FALSE;
+  }
+  if (AgesaEventAlloc->ReadRecordPtr < AgesaEventAlloc->WriteRecordPtr) {
+    UnreadEntries = AgesaEventAlloc->WriteRecordPtr - AgesaEventAlloc->ReadRecordPtr;
+  } else {
+    UnreadEntries = TOTAL_EVENT_LOG_BUFFERS - (AgesaEventAlloc->ReadRecordPtr - AgesaEventAlloc->WriteRecordPtr);
+  }
+  if (Index >= UnreadEntries) {
+    return FALSE;
+  }
+  ActualIndex = Index + AgesaEventAlloc->ReadRecordPtr;
+  if (ActualIndex >= TOTAL_EVENT_LOG_BUFFERS) {
+    ActualIndex -= TOTAL_EVENT_LOG_BUFFERS;
+  }
+
+  EventRecord->EventClass = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.EventClass;
+  EventRecord->EventInfo  = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.EventInfo;
+  EventRecord->DataParam1 = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.DataParam1;
+  EventRecord->DataParam2 = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.DataParam2;
+  EventRecord->DataParam3 = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.DataParam3;
+  EventRecord->DataParam4 = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.DataParam4;
+
+  return TRUE;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets the Event Log pointer.
+ *
+ * It will locate the Event Log on the heap using the heap locate service.  If the Event
+ * Log is not located, NULL is returned.
+ *
+ * @param[out]  EventLog  Pointer to the Event Log, or NULL.
+ * @param[in]   StdHeader Our Configuration, for passing to services.
+ *
+ */
+VOID
+STATIC
+GetEventLogHeapPointer (
+     OUT   AGESA_STRUCT_BUFFER **EventLog,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  LOCATE_HEAP_PTR LocateHeapStruct;
+
+  LocateHeapStruct.BufferHandle = EVENT_LOG_BUFFER_HANDLE;
+  LocateHeapStruct.BufferPtr = NULL;
+  if ((HeapLocateBuffer (&LocateHeapStruct, StdHeader)) == AGESA_SUCCESS) {
+    *EventLog = (AGESA_STRUCT_BUFFER *)LocateHeapStruct.BufferPtr;
+  } else {
+    *EventLog = NULL;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuFamilyTranslation.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuFamilyTranslation.c
new file mode 100644
index 0000000000..8c9e969b53
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuFamilyTranslation.c
@@ -0,0 +1,484 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Family Translation functions.
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU/Interface
+ * @e \$Revision: 56322 $   @e \$Date: 2011-07-11 16:51:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "CommonReturns.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_CPUFAMILYTRANSLATION_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+CONST CPU_SPECIFIC_SERVICES ROMDATA cpuNullServices =
+{
+  0,
+  (PF_CPU_DISABLE_PSTATE) CommonReturnAgesaSuccess,
+  (PF_CPU_TRANSITION_PSTATE) CommonReturnAgesaSuccess,
+  (PF_CPU_GET_IDD_MAX) CommonReturnFalse,
+  (PF_CPU_GET_TSC_RATE) CommonReturnAgesaSuccess,
+  (PF_CPU_GET_NB_FREQ) CommonReturnAgesaSuccess,
+  (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonReturnAgesaSuccess,
+  (PF_CPU_GET_NB_PSTATE_INFO) CommonReturnFalse,
+  (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonReturnAgesaSuccess,
+  (PF_CPU_GET_NB_IDD_MAX) CommonReturnFalse,
+  (PF_CPU_AP_INITIAL_LAUNCH) CommonReturnFalse,
+  (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonReturnZero8,
+  (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonReturnAgesaSuccess,
+  (PF_CPU_SET_AP_CORE_NUMBER) CommonVoid,
+  (PF_CPU_GET_AP_CORE_NUMBER) CommonReturnZero32,
+  (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonVoid,
+  (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonReturnAgesaSuccess,
+  (PF_CPU_SAVE_FEATURES) CommonReturnAgesaSuccess,
+  (PF_CPU_WRITE_FEATURES) CommonReturnAgesaSuccess,
+  (PF_CPU_SET_WARM_RESET_FLAG) CommonReturnAgesaSuccess,
+  (PF_CPU_GET_WARM_RESET_FLAG) CommonReturnAgesaSuccess,
+  GetEmptyArray,
+  GetEmptyArray,
+  GetEmptyArray,
+  GetEmptyArray,
+  GetEmptyArray,
+  GetEmptyArray,
+  GetEmptyArray,
+  (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonReturnAgesaSuccess,
+  (PF_IS_NB_PSTATE_ENABLED) CommonReturnFalse,
+  (PF_NEXT_LINK_HAS_HTFPY_FEATS) CommonReturnFalse,
+  (PF_SET_HT_PHY_REGISTER) CommonVoid,
+  (PF_GET_NEXT_HT_LINK_FEATURES) CommonVoid,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  InitCacheDisabled,
+  (PF_GET_EARLY_INIT_TABLE) CommonVoid
+};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+GetCpuServices (
+  IN       CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+  IN       UINT64            *MatchData,
+     OUT   CONST VOID        **CpuServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE CpuSupportedFamiliesTable;
+extern CPU_FAMILY_ID_XLAT_TABLE CpuSupportedFamilyIdTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Returns the logical ID of the desired processor. This will be obtained by
+ *  reading the CPUID and converting it into a "logical ID" which is not package
+ *  dependent.
+ *
+ *  @param[in]      Socket             Socket
+ *  @param[out]     LogicalId          The Processor's Logical ID
+ *  @param[in]      StdHeader          Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetLogicalIdOfSocket (
+  IN       UINT32 Socket,
+     OUT   CPU_LOGICAL_ID *LogicalId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32      RawCpuid;
+  PCI_ADDR    PciAddress;
+  AGESA_STATUS AssumedSuccess;
+
+  RawCpuid = 0;
+
+  if (GetPciAddress (StdHeader, (UINT8)Socket, 0, &PciAddress, &AssumedSuccess)) {
+    PciAddress.Address.Function = FUNC_3;
+    PciAddress.Address.Register = CPUID_FMR;
+    LibAmdPciRead (AccessWidth32, PciAddress, &RawCpuid, StdHeader);
+    GetLogicalIdFromCpuid (RawCpuid, LogicalId, StdHeader);
+  } else {
+    LogicalId->Family = 0;
+    LogicalId->Revision = 0;
+    // Logical ID was not found.
+    IDS_ERROR_TRAP;
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Returns the logical ID of the executing core. This will be obtained by reading
+ *  the CPUID and converting it into a "logical ID" which is not package dependent.
+ *
+ *  @param[out]     LogicalId          The Processor's Logical ID
+ *  @param[in]      StdHeader          Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetLogicalIdOfCurrentCore (
+     OUT   CPU_LOGICAL_ID *LogicalId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPUID_DATA  CpuidDataStruct;
+
+  LibAmdCpuidRead (AMD_CPUID_APICID_LPC_BID, &CpuidDataStruct, StdHeader);
+  GetLogicalIdFromCpuid (CpuidDataStruct.EAX_Reg, LogicalId, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Returns the logical ID of a processor with the given CPUID value. This
+ *  will be obtained by converting it into a "logical ID" which is not package
+ *  dependent.
+ *
+ *  @param[in]      RawCpuid           The unprocessed CPUID value to be translated
+ *  @param[out]     LogicalId          The Processor's Logical ID
+ *  @param[in]      StdHeader          Handle of Header for calling lib functions and services
+ *
+ */
+VOID
+GetLogicalIdFromCpuid (
+  IN       UINT32 RawCpuid,
+     OUT   CPU_LOGICAL_ID *LogicalId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8       i;
+  UINT8       k;
+  UINT8       NumberOfFamiliesSupported;
+  UINT8       NumberOfLogicalSubFamilies;
+  UINT8       LogicalIdEntries;
+  UINT32      j;
+  UINT32      RawFamily;
+  UINT32      CpuModelAndExtendedModel;
+  UINT64      LogicalFamily;
+  BOOLEAN     IdNotFound;
+  BOOLEAN     FamilyNotFound;
+  CONST PF_CPU_GET_SUBFAMILY_ID_ARRAY *SubFamilyIdPtr;
+  CPU_LOGICAL_ID_XLAT *CpuLogicalIdAndRevPtr;
+  CONST CPU_LOGICAL_ID_FAMILY_XLAT *ImageSupportedId;
+
+  IdNotFound = TRUE;
+  FamilyNotFound = TRUE;
+  CpuLogicalIdAndRevPtr = NULL;
+  ImageSupportedId = CpuSupportedFamilyIdTable.FamilyIdTable;
+  NumberOfFamiliesSupported = CpuSupportedFamilyIdTable.Elements;
+
+  RawFamily = ((RawCpuid & 0xF00) >> 8) + ((RawCpuid & 0xFF00000) >> 20);
+  RawCpuid &= (UINT32) CPU_FMS_MASK;
+  CpuModelAndExtendedModel = (UINT16) ((RawCpuid >> 8) | RawCpuid);
+
+  LogicalId->Family = 0;
+  LogicalId->Revision = 0;
+
+  for (i = 0; i < NumberOfFamiliesSupported && FamilyNotFound; i++) {
+    if (ImageSupportedId[i].Family == RawFamily) {
+      FamilyNotFound = FALSE;
+      LogicalId->Family = ImageSupportedId[i].UnknownRevision.Family;
+      LogicalId->Revision = ImageSupportedId[i].UnknownRevision.Revision;
+
+      NumberOfLogicalSubFamilies = ImageSupportedId[i].Elements;
+      SubFamilyIdPtr = ImageSupportedId[i].SubFamilyIdTable;
+      for (j = 0; j < NumberOfLogicalSubFamilies && IdNotFound; j++) {
+        SubFamilyIdPtr[j] ((CONST CPU_LOGICAL_ID_XLAT **)&CpuLogicalIdAndRevPtr, &LogicalIdEntries, &LogicalFamily, StdHeader);
+        ASSERT (CpuLogicalIdAndRevPtr != NULL);
+        for (k = 0; k < LogicalIdEntries; k++) {
+          if (CpuLogicalIdAndRevPtr[k].RawId == CpuModelAndExtendedModel) {
+            IdNotFound = FALSE;
+            LogicalId->Family = LogicalFamily;
+            LogicalId->Revision = CpuLogicalIdAndRevPtr[k].LogicalId;
+            break;
+          }
+        }
+      }
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Retrieves a pointer to the desired processor's family specific services structure.
+ *
+ *  @param[in]      Socket             The Processor in this Socket.
+ *  @param[out]     FunctionTable      The Processor's Family Specific services.
+ *  @param[in]      StdHeader          Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetCpuServicesOfSocket (
+  IN       UINT32 Socket,
+     OUT   CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  GetFeatureServicesOfSocket (&CpuSupportedFamiliesTable,
+                              Socket,
+                              (CONST VOID **) FunctionTable,
+                              StdHeader);
+  if (*FunctionTable == NULL) {
+    *FunctionTable = &cpuNullServices;
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Retrieves a pointer to the desired processor's family specific services structure.
+ *
+ *  @param[in]      FamilyTable        The table to search in.
+ *  @param[in]      Socket             The Processor in this Socket.
+ *  @param[out]     CpuServices        The Processor's Family Specific services.
+ *  @param[in]      StdHeader          Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetFeatureServicesOfSocket (
+  IN       CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+  IN       UINT32            Socket,
+     OUT   CONST VOID        **CpuServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPU_LOGICAL_ID CpuFamilyRevision;
+
+  GetLogicalIdOfSocket (Socket, &CpuFamilyRevision, StdHeader);
+  GetFeatureServicesFromLogicalId (FamilyTable, &CpuFamilyRevision, CpuServices, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Retrieves a pointer to the executing core's family specific services structure.
+ *
+ *  @param[out]     FunctionTable      The Processor's Family Specific services.
+ *  @param[in]      StdHeader          Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetCpuServicesOfCurrentCore (
+     OUT   CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  GetFeatureServicesOfCurrentCore (&CpuSupportedFamiliesTable,
+                                   (CONST VOID **) FunctionTable,
+                                   StdHeader);
+  if (*FunctionTable == NULL) {
+    *FunctionTable = &cpuNullServices;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Retrieves a pointer to the family specific services structure for a processor
+ *  with the given logical ID.
+ *
+ *  @param[in]      FamilyTable        The table to search in.
+ *  @param[out]     CpuServices        The Processor's Family Specific services.
+ *  @param[in]      StdHeader          Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetFeatureServicesOfCurrentCore (
+  IN       CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+     OUT   CONST VOID        **CpuServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPU_LOGICAL_ID CpuFamilyRevision;
+
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  GetFeatureServicesFromLogicalId (FamilyTable, &CpuFamilyRevision, CpuServices, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Retrieves a pointer to the family specific services structure for a processor
+ *  with the given logical ID.
+ *
+ *  @param[in]      LogicalId          The Processor's logical ID.
+ *  @param[out]     FunctionTable      The Processor's Family Specific services.
+ *  @param[in]      StdHeader          Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetCpuServicesFromLogicalId (
+  IN       CPU_LOGICAL_ID *LogicalId,
+     OUT   CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  GetFeatureServicesFromLogicalId (&CpuSupportedFamiliesTable,
+                                   LogicalId,
+                                   (CONST VOID **) FunctionTable,
+                                   StdHeader);
+  if (*FunctionTable == NULL) {
+    *FunctionTable = &cpuNullServices;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Retrieves a pointer to the family specific services structure for a processor
+ *  with the given logical ID.
+ *
+ *  @param[in]      FamilyTable        The table to search in.
+ *  @param[in]      LogicalId          The Processor's logical ID.
+ *  @param[out]     CpuServices        The Processor's Family Specific services.
+ *  @param[in]      StdHeader          Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetFeatureServicesFromLogicalId (
+  IN       CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+  IN       CPU_LOGICAL_ID    *LogicalId,
+     OUT   CONST VOID        **CpuServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  GetCpuServices (FamilyTable, &LogicalId->Family, CpuServices, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Finds a family match in the given table, and returns the pointer to the
+ *  appropriate table.  If no match is found in the table, NULL will be returned.
+ *
+ *  @param[in]      FamilyTable        The table to search in.
+ *  @param[in]      MatchData          Family data that must match.
+ *  @param[out]     CpuServices        The Processor's Family Specific services.
+ *  @param[in]      StdHeader          Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+STATIC
+GetCpuServices (
+  IN       CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+  IN       UINT64            *MatchData,
+     OUT   CONST VOID        **CpuServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN IsFamily;
+  UINT8   i;
+  UINT8   NumberOfFamiliesSupported;
+  CONST CPU_SPECIFIC_SERVICES_XLAT *ImageSupportedFamiliesPtr;
+
+  ImageSupportedFamiliesPtr = FamilyTable->FamilyTable;
+  NumberOfFamiliesSupported = FamilyTable->Elements;
+  IsFamily = FALSE;
+  for (i = 0; i < NumberOfFamiliesSupported; i++) {
+    if ((ImageSupportedFamiliesPtr[i].Family & *MatchData) != 0) {
+      IsFamily = TRUE;
+      break;
+    }
+  }
+  if (IsFamily) {
+    *CpuServices = ImageSupportedFamiliesPtr[i].TablePtr;
+  } else {
+    *CpuServices = NULL;
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Used to stub out various family specific tables of information.
+ *
+ *  @param[in]      FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]      Empty                   NULL, to indicate no data.
+ *  @param[out]     NumberOfElements        Zero, to indicate no data.
+ *  @param[in]      StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetEmptyArray (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+     OUT   CONST VOID **Empty,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  *NumberOfElements = 0;
+  *Empty = NULL;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuFamilyTranslation.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuFamilyTranslation.h
new file mode 100644
index 0000000000..4cb929bd3b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuFamilyTranslation.h
@@ -0,0 +1,1008 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Family Translation functions.
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 55552 $   @e \$Date: 2011-06-22 09:31:58 -0600 (Wed, 22 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_FAMILY_TRANSLATION_H_
+#define _CPU_FAMILY_TRANSLATION_H_
+
+/**
+ * @page cpuimplfss CPU Family Specific Services Implementation Guide
+ *
+ * CPU Family Specific Services provides access to supported family service functions and data,
+ * in a manner that isolates calling code from knowledge about particular families or which
+ * families are supported in the current build.
+ *
+ * @par Adding a Method to Family Specific Services
+ *
+ * To add a new method to Family Specific Services, follow these steps.
+ * <ul>
+ * <li> Create a typedef for the Method with the correct parameters and return type.
+ *
+ *   <ul>
+ *   <li> Name the method typedef (*PF_METHOD_NAME)(), where METHOD_NAME is the same name as the method table item,
+ *     but with "_"'s and UPPERCASE, rather than mixed case.
+ *     @n <tt> typedef VOID (*PF_METHOD_NAME)(); </tt> @n
+ *
+ *   <li> [Optionally make the type F_<name> and provide a separate:
+ *     @n <tt> typedef F_METHOD_NAME *PF_METHOD_NAME> </tt> @n
+ *     and provide a single line "///" doxygen comment brief description on the PF_ type.]
+ *   </ul>
+ *
+ * <li> The first parameter to @b all Family Specific Service Methods is @b required to be a reference to
+ *   their Family Service struct.
+ *   @n <tt> IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices </tt> @n
+ *
+ * <li> Provide a standard doxygen function preamble for the Method typedef.  Begin the
+ *   detailed description by provide a reference to the method instances page by including
+ *   the lines below:
+ *   @code
+ *   *
+ *   * @CpuServiceInstances
+ *   *
+ *   @endcode
+ *   @note It is important to provide documentation for the method type, because the method may not
+ *   have an implementation in any families supported by the current package. @n
+ *
+ * <li> Add to the CPU_SPECIFIC_SERVICES struct an item for the Method:
+ *   @n <tt>  PF_METHOD_NAME MethodName; ///< Method: description. </tt> @n
+ * </ul>
+ *
+ * @par Implementing a Family Specific Instance of the method.
+ *
+ * To implement an instance of a method for a specific family follow these steps.
+ *
+ * - In appropriate files in the family specific directory, implement the method with the return type
+ *   and parameters matching the method typedef.
+ *
+ * - Name the function FnnMethodName(), where nn is the family number.
+ *
+ * - Create a doxygen function preamble for the method instance.  Begin the detailed description with
+ *   an Implements command to reference the method type and add this instance to the Method Instances page.
+ *   @code
+ *   *
+ *   *  @CpuServiceMethod{::F_METHOD_NAME}.
+ *   *
+ *   @endcode
+ *
+ * - To access other family specific services as part of the method implementation, the function
+ *   @b must use FamilySpecificServices->OtherMethod().  Do not directly call other family specific
+ *   routines, because in the table there may be overrides or this routine may be shared by multiple families.
+ *
+ * - Do @b not call Family translation services from a family specific instance.  Use the parameter.
+ *
+ * - Add the instance to the family specific CPU_SPECIFIC_SERVICES instance.
+ *
+ * - If a family does not need an instance of the method use one of the CommonReturns from
+ *   CommonReturns.h with the same return type.
+ *
+ * @par Invoking Family Specific Services.
+ *
+ * The following example shows how to invoke a family specific method.
+ * @n @code
+ *        CPU_SPECIFIC_SERVICES *FamilyServices;
+ *
+ *        GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+ *        ASSERT (FamilyServices != NULL);
+ *        FamilyServices->MethodName (FamilyServices, StdHeader);
+ * @endcode
+ *
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+#include "cpuPostInit.h"
+#include "cpuEnvInit.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "Table.h"
+#include "Ids.h"
+#include "Topology.h"
+
+//  Forward declaration needed for multi-structure mutual references.
+AGESA_FORWARD_DECLARATION (CPU_SPECIFIC_SERVICES);
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+/**
+ *  Disable the desired P-state.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     StateNumber             Hardware P-state number.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_DISABLE_PSTATE (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8 StateNumber,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_DISABLE_PSTATE *PF_CPU_DISABLE_PSTATE;
+
+/**
+ *  Transition the current core to the desired P-state.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     StateNumber             Software P-state number.
+ *  @param[in]     WaitForChange           Wait/don't wait for P-state change to complete.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_TRANSITION_PSTATE (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8 StateNumber,
+  IN       BOOLEAN WaitForChange,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_TRANSITION_PSTATE *PF_CPU_TRANSITION_PSTATE;
+
+/**
+ *  Get the desired P-state's maximum current required in milliamps.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     StateNumber             The desired hardware P-state number.
+ *  @param[out]    ProcIddMax              The P-state's maximum current.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                    The P-state is enabled, and ProcIddMax is valid.
+ *  @retval        FALSE                   The P-state is disabled.
+ *
+ */
+typedef BOOLEAN F_CPU_GET_IDD_MAX (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *ProcIddMax,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_IDD_MAX *PF_CPU_GET_IDD_MAX;
+
+
+/**
+ *  Returns the rate at which the current core's timestamp counter increments in megahertz.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[out]    FreqInMHz               The rate at which the TSC increments in megahertz.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_TSC_RATE (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+     OUT   UINT32 *FreqInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_TSC_RATE *PF_CPU_GET_TSC_RATE;
+
+/**
+ *  Returns the processor north bridge's clock rate in megahertz.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[out]    FreqInMHz               The desired node's frequency in megahertz.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        AGESA_SUCCESS           FreqInMHz is valid.
+ */
+typedef AGESA_STATUS F_CPU_GET_NB_FREQ (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+     OUT   UINT32 *FreqInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_NB_FREQ *PF_CPU_GET_NB_FREQ;
+
+/**
+ *  Returns the node's minimum and maximum northbridge frequency.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     PlatformConfig          Platform profile/build option config structure.
+ *  @param[in]     PciAddress              The segment, bus, and device numbers of the CPU in question.
+ *  @param[out]    MinFreqInMHz            The minimum north bridge frequency.
+ *  @param[out]    MaxFreqInMHz            The maximum north bridge frequency.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        AGESA_STATUS            Northbridge frequency is valid
+ */
+typedef AGESA_STATUS F_CPU_GET_MIN_MAX_NB_FREQ (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR *PciAddress,
+     OUT   UINT32 *MinFreqInMHz,
+     OUT   UINT32 *MaxFreqInMHz,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_MIN_MAX_NB_FREQ *PF_CPU_GET_MIN_MAX_NB_FREQ;
+
+/**
+ *  Returns the processor north bridge's P-state settings.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     PlatformConfig          Platform profile/build option config structure.
+ *  @param[in]     PciAddress              The segment, bus, and device numbers of the CPU in question.
+ *  @param[in]     NbPstate                The NB P-state number to check.
+ *  @param[out]    FreqNumeratorInMHz      The desired node's frequency numerator in megahertz.
+ *  @param[out]    FreqDivisor             The desired node's frequency divisor.
+ *  @param[out]    VoltageInuV             The desired node's voltage in microvolts.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                    NbPstate is valid
+ *  @retval        FALSE                   NbPstate is disabled or invalid
+ */
+typedef BOOLEAN F_CPU_GET_NB_PSTATE_INFO (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       PCI_ADDR *PciAddress,
+  IN       UINT32 NbPstate,
+     OUT   UINT32 *FreqNumeratorInMHz,
+     OUT   UINT32 *FreqDivisor,
+     OUT   UINT32 *VoltageInuV,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_NB_PSTATE_INFO *PF_CPU_GET_NB_PSTATE_INFO;
+
+/**
+ *  Returns whether or not the NB frequency initialization sequence is required
+ *  to be performed by the BIOS.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     PciAddress              The northbridge to query by pci base address.
+ *  @param[out]    NbVidUpdateAll          Do all NbVids need to be updated as well.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef BOOLEAN F_CPU_IS_NBCOF_INIT_NEEDED (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PCI_ADDR *PciAddress,
+     OUT   BOOLEAN *NbVidUpdateAll,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_IS_NBCOF_INIT_NEEDED *PF_CPU_IS_NBCOF_INIT_NEEDED;
+
+/**
+ *  Get the desired NB P-state's maximum current required in milliamps.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     StateNumber             The desired hardware P-state number.
+ *  @param[out]    NbIddMax                The NB P-state's maximum current.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                    The NB P-state is enabled, and NbIddMax is valid.
+ *  @retval        FALSE                   The NB P-state is disabled.
+ *
+ */
+typedef BOOLEAN F_CPU_GET_NB_IDD_MAX (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       UINT8 StateNumber,
+     OUT   UINT32 *NbIddMax,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_NB_IDD_MAX *PF_CPU_GET_NB_IDD_MAX;
+
+/**
+ *  Launches the desired core from the reset vector.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     SocketNumber            The desired core's socket number.
+ *  @param[in]     ModuleNumber            The desired core's die number.
+ *  @param[in]     CoreNumber              The desired core's die relative core number.
+ *  @param[in]     PrimaryCoreNumber       SocketNumber / ModuleNumber's primary core number.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @retval        TRUE                    The core was launched successfully.
+ *  @retval        FALSE                   The core was previously launched, or has a problem.
+ */
+typedef BOOLEAN F_CPU_AP_INITIAL_LAUNCH (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT32 SocketNumber,
+  IN       UINT32 ModuleNumber,
+  IN       UINT32 CoreNumber,
+  IN       UINT32 PrimaryCoreNumber,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_AP_INITIAL_LAUNCH *PF_CPU_AP_INITIAL_LAUNCH;
+
+/**
+ *  Returns the appropriate number of physical processor cores
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @return        One-based number of physical cores on current processor
+ */
+typedef UINT8 F_CPU_NUMBER_OF_PHYSICAL_CORES (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_NUMBER_OF_PHYSICAL_CORES *PF_CPU_NUMBER_OF_PHYSICAL_CORES;
+
+/**
+ *  Returns a family specific table of information pointer and size.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[out]    FamilySpecificArray     Pointer to the appropriate list for the core.
+ *  @param[out]    NumberOfElements        Number of valid entries FamilySpecificArray.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID F_CPU_GET_FAMILY_SPECIFIC_ARRAY (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+     OUT   CONST VOID **FamilySpecificArray,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_FAMILY_SPECIFIC_ARRAY *PF_CPU_GET_FAMILY_SPECIFIC_ARRAY;
+
+/**
+ *  Returns a model specific list of logical IDs.
+ *
+ *  @param[out]    LogicalIdXlat           Installed logical ID table.
+ *  @param[out]    NumberOfElements        Number of entries in the Logical ID translate table.
+ *  @param[out]    LogicalFamily           Base logical family bit mask.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID F_CPU_GET_SUBFAMILY_ID_ARRAY (
+     OUT   CONST CPU_LOGICAL_ID_XLAT **LogicalIdXlat,
+     OUT   UINT8 *NumberOfElements,
+     OUT   UINT64 *LogicalFamily,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/// Reference to a method.
+typedef F_CPU_GET_SUBFAMILY_ID_ARRAY *PF_CPU_GET_SUBFAMILY_ID_ARRAY;
+
+/**
+ *  Use the Mailbox Register to get the Ap Mailbox info for the current core.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[out]    ApMailboxInfo           The AP Mailbox info
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID (F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+     OUT   AP_MAILBOXES           *ApMailboxInfo,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a method
+typedef F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE *PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE;
+
+/**
+ *  Set the AP core number in the AP's Mailbox.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     Socket                  The AP's socket
+ *  @param[in]     Module                  The AP's module
+ *  @param[in]     ApCoreNumber            The AP's unique core number
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID (F_CPU_SET_AP_CORE_NUMBER) (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       UINT32                 Socket,
+  IN       UINT32                 Module,
+  IN       UINT32                 ApCoreNumber,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a method
+typedef F_CPU_SET_AP_CORE_NUMBER *PF_CPU_SET_AP_CORE_NUMBER;
+
+/**
+ *  Get the AP core number from hardware.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @return        The AP's unique core number
+ */
+typedef UINT32 (F_CPU_GET_AP_CORE_NUMBER) (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a method
+typedef F_CPU_GET_AP_CORE_NUMBER *PF_CPU_GET_AP_CORE_NUMBER;
+
+/**
+ *  Move the AP's core number from the mailbox to hardware.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ *  @return        The AP's unique core number
+ */
+typedef VOID (F_CPU_TRANSFER_AP_CORE_NUMBER) (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a method
+typedef F_CPU_TRANSFER_AP_CORE_NUMBER *PF_CPU_TRANSFER_AP_CORE_NUMBER;
+
+/**
+ * Core ID position in the initial APIC ID, reflected as a number zero or one.
+ */
+typedef enum {
+  CoreIdPositionZero, ///< Zero, the Core Id bits are the Most Significant bits.
+  CoreIdPositionOne,  ///< One, the Core Id bits are the Least Significant bits.
+  CoreIdPositionMax   ///< Limit check.
+} CORE_ID_POSITION;
+
+/**
+ * Return a number zero or one, based on the Core ID position in the initial APIC Id.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in]     FamilySpecificServices  The current Family Specific Services.
+ * @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ * @retval        CoreIdPositionZero      Core Id is not low
+ * @retval        CoreIdPositionOne       Core Id is low
+ */
+typedef CORE_ID_POSITION F_CORE_ID_POSITION_IN_INITIAL_APIC_ID (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a method
+typedef F_CORE_ID_POSITION_IN_INITIAL_APIC_ID *PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID;
+
+/**
+ *  Get least common features set of all CPUs and save them to CPU_FEATURES_LIST
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in,out] cpuFeatureListPtr       The CPU Features List
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID (F_CPU_SAVE_FEATURES) (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   CPU_FEATURES_LIST      *cpuFeatureListPtr,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a method
+typedef F_CPU_SAVE_FEATURES *PF_CPU_SAVE_FEATURES;
+
+/**
+ *  Get least common features from CPU_FEATURES_LIST and write them to CPU
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices  The current Family Specific Services.
+ *  @param[in,out] cpuFeatureListPtr       The CPU Features List
+ *  @param[in]     StdHeader               Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID (F_CPU_WRITE_FEATURES) (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   CPU_FEATURES_LIST      *cpuFeatureListPtr,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a method
+typedef F_CPU_WRITE_FEATURES *PF_CPU_WRITE_FEATURES;
+
+/**
+ *  Set Warm Reset Flag
+ *
+ *  @CpuServiceInstances
+ *
+ * @param[in]      FamilySpecificServices  The current Family Specific Services.
+ * @param[in]      StdHeader     Header for library and services.
+ * @param[in]      Request       Value to set the flags to.
+ *
+ */
+typedef VOID (F_CPU_SET_WARM_RESET_FLAG) (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       WARM_RESET_REQUEST *Request
+  );
+
+/// Reference to a method
+typedef F_CPU_SET_WARM_RESET_FLAG *PF_CPU_SET_WARM_RESET_FLAG;
+
+/**
+ *  Get Warm Reset Flag
+ *
+ *  @CpuServiceInstances
+ *
+ * @param[in]      FamilySpecificServices  The current Family Specific Services.
+ * @param[in]      StdHeader     Header for library and services.
+ * @param[out]     BiosRstDet    Indicate warm reset status.
+ *
+ */
+typedef VOID (F_CPU_GET_WARM_RESET_FLAG) (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+     OUT   WARM_RESET_REQUEST *Request
+  );
+
+/// Reference to a method
+typedef F_CPU_GET_WARM_RESET_FLAG *PF_CPU_GET_WARM_RESET_FLAG;
+
+
+/**
+ *  Get CPU Specific Platform Type Info.
+ *
+ *  @CpuServiceInstances
+ *
+ *  @param[in]     FamilySpecificServices         The current Family Specific Services.
+ *  @param[in,out] FeaturesUnion                  The Features supported by this platform.
+ *  @param[in]     StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   PLATFORM_FEATS         *FeaturesUnion,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO *PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO;
+
+/**
+ * Is the Northbridge PState feature enabled?
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in]      FamilySpecificServices         The current Family Specific Services.
+ * @param[in]      PlatformConfig                 Platform profile/build option config structure.
+ * @param[in]      StdHeader                      Handle of Header for calling lib functions and services.
+ *
+ * @retval         TRUE                           The NB PState feature is enabled.
+ * @retval         FALSE                          The NB PState feature is not enabled.
+ */
+typedef BOOLEAN F_IS_NB_PSTATE_ENABLED (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/// Reference to a method
+typedef F_IS_NB_PSTATE_ENABLED *PF_IS_NB_PSTATE_ENABLED;
+
+/**
+ * Gets the next link with features matching the HT phy register table entry type features.
+ *
+ *  @CpuServiceInstances
+ *
+ * @param[in]     FamilySpecificServices   The current Family Specific Services.
+ * @param[in,out] HtHostCapability Initially the PCI bus, device, function=0, offset=0;
+ *                                         Each call returns the HT Host Capability function and offset;
+ *                                         Caller may use it to access registers, but must @b not modify it;
+ *                                         Each new call passes the previous value as input.
+ * @param[in,out] Link             Initially zero, each call returns the link number; caller passes it back unmodified each call.
+ * @param[in]     HtPhyLinkType    Link type field from a register table entry to compare against
+ * @param[out]    MatchedSublink1  TRUE: It is actually just sublink 1 that matches, FALSE: any other condition.
+ * @param[out]    Frequency0       The frequency of sublink0 (200 MHz if not connected).
+ * @param[out]    Frequency1       The frequency of sublink1 (200 MHz if not connected).
+ * @param[in]     StdHeader        Standard Head Pointer
+ *
+ * @retval        TRUE             Link matches
+ * @retval        FALSE            No more links
+ *
+ */
+typedef BOOLEAN F_NEXT_LINK_HAS_HTFPY_FEATS (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   PCI_ADDR           *HtHostCapability,
+  IN OUT   UINT32             *Link,
+  IN       HT_PHY_LINK_FEATS  *HtPhyLinkType,
+     OUT   BOOLEAN            *MatchedSublink1,
+     OUT   HT_FREQUENCIES     *Frequency0,
+     OUT   HT_FREQUENCIES     *Frequency1,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+/// Reference to a Method.
+typedef F_NEXT_LINK_HAS_HTFPY_FEATS *PF_NEXT_LINK_HAS_HTFPY_FEATS;
+
+/**
+ * Applies an HT Phy read-modify-write based on an HT Phy register table entry.
+ *
+ *  @CpuServiceInstances
+ *
+ * @param[in]  FamilySpecificServices    The current Family Specific Services.
+ * @param[in]  HtPhyEntry                HT Phy register table entry to apply
+ * @param[in]  CapabilitySet             The link's HT Host base address.
+ * @param[in]  Link                      Zero based, node, link number (not package link), always a sublink0 link.
+ * @param[in]  StdHeader                 Config handle for library and services
+ *
+ */
+typedef VOID F_SET_HT_PHY_REGISTER (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN       HT_PHY_TYPE_ENTRY_DATA  *HtPhyEntry,
+  IN       PCI_ADDR                CapabilitySet,
+  IN       UINT32                  Link,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+/// Reference to a Method.
+typedef F_SET_HT_PHY_REGISTER *PF_SET_HT_PHY_REGISTER;
+
+/**
+ * Performs an early initialization function on the executing core.
+ *
+ * @param[in]  FamilyServices            The current Family Specific Services.
+ * @param[in]  EarlyParams               CPU module early paramters.
+ * @param[in]  StdHeader                 Config handle for library and services
+ *
+ */
+typedef VOID F_PERFORM_EARLY_INIT_ON_CORE (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+/// Reference to a Method.
+typedef F_PERFORM_EARLY_INIT_ON_CORE *PF_PERFORM_EARLY_INIT_ON_CORE;
+
+/**
+ * A struct that contains function pointer and function flag
+ *
+ * the flag indicates if the function need to be run.
+ */
+typedef struct _S_PERFORM_EARLY_INIT_ON_CORE {
+  PF_PERFORM_EARLY_INIT_ON_CORE PerformEarlyInitOnCore; ///< Function Pointer, which points to the function need to be run at early stage
+  UINT32 PerformEarlyInitFlag; ///< Function Flag, which indicates if the function need to be run.
+} S_PERFORM_EARLY_INIT_ON_CORE;
+
+/**
+ * Returns the initialization steps that the executing core should
+ * perform at AmdInitEarly.
+ *
+ *  @CpuServiceInstances
+ *
+ * @param[in]  FamilyServices            The current Family Specific Services.
+ * @param[out] Table                     Table of appropriate init steps for the executing core.
+ * @param[in]  EarlyParams               CPU module early paramters.
+ * @param[in]  StdHeader                 Config handle for library and services
+ *
+ */
+typedef VOID F_GET_EARLY_INIT_TABLE (
+  IN       CPU_SPECIFIC_SERVICES                *FamilyServices,
+     OUT   CONST S_PERFORM_EARLY_INIT_ON_CORE   **Table,
+  IN       AMD_CPU_EARLY_PARAMS                 *EarlyParams,
+  IN       AMD_CONFIG_PARAMS                    *StdHeader
+  );
+/// Reference to a Method.
+typedef F_GET_EARLY_INIT_TABLE *PF_GET_EARLY_INIT_TABLE;
+
+/**
+ * Provide the features of the next HT link.
+ *
+ *  @CpuServiceInstances
+ *
+ * This method is different than the HT Phy Features method, because for the phy registers
+ * sublink 1 matches and should be programmed if the link is ganged but for PCI config
+ * registers sublink 1 is reserved if the link is ganged.
+ *
+ * @param[in]     FamilySpecificServices    The current Family Specific Services.
+ * @param[in,out] Link                      The link number, for accessing non-capability set registers.
+ *                                          Zero on initial call, and passed back unmodified on each subsequent call.
+ * @param[in,out] LinkBase                  IN: initially the node's PCI config base address, passed back on each call.
+ *                                          OUT: the base HT Host capability PCI address for the link.
+ * @param[out]    HtHostFeats               The link's features.
+ * @param[in]     StdHeader                 Standard Head Pointer
+ *
+ * @retval        TRUE                      Valid link and features found.
+ * @retval        FALSE                     No more links.
+ */
+typedef BOOLEAN F_GET_NEXT_HT_LINK_FEATURES (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+  IN OUT   UINTN                  *Link,
+  IN OUT   PCI_ADDR               *LinkBase,
+     OUT   HT_HOST_FEATS          *HtHostFeats,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+/// Reference to a Method.
+typedef F_GET_NEXT_HT_LINK_FEATURES *PF_GET_NEXT_HT_LINK_FEATURES;
+
+/// Cache Enable / Disable policy before giving control back to OS.
+typedef enum {
+  InitCacheDisabled,            ///<Disable cache CR0.CD bit
+  InitCacheEnabled              ///<Enable cache CR0.CD bit
+} FAMILY_CACHE_INIT_POLICY;
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provide the interface to all cpu Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ * See CPU Family Specific Services Implementation Guide for adding new services.
+ */
+struct _CPU_SPECIFIC_SERVICES {                                         // See the Forwaqrd Declaration above
+  UINT16          Revision;                                             ///< Interface version
+  // Public Methods.
+  PF_CPU_DISABLE_PSTATE DisablePstate;                                  ///< Method: Disable the desired P-state.
+  PF_CPU_TRANSITION_PSTATE TransitionPstate;                            ///< Method: Transition the current core to the desired P-state.
+  PF_CPU_GET_IDD_MAX GetProcIddMax;                                     ///< Method: Gets P-state maximum current required
+  PF_CPU_GET_TSC_RATE GetTscRate;                                       ///< Method: Returns the rate at which the current core's timestamp counter increments in megahertz.
+  PF_CPU_GET_NB_FREQ GetCurrentNbFrequency;                             ///< Method: Returns the processor north bridge's clock rate in megahertz.
+  PF_CPU_GET_MIN_MAX_NB_FREQ GetMinMaxNbFrequency;                      ///< Method: Returns the node's minimum and maximum northbridge frequency.
+  PF_CPU_GET_NB_PSTATE_INFO GetNbPstateInfo;                            ///< Method: Returns information about the processor north bridge's P-states.
+  PF_CPU_IS_NBCOF_INIT_NEEDED IsNbCofInitNeeded;                        ///< Method: Returns whether or not the NB frequency initialization sequence is required to be performed by the BIOS.
+  PF_CPU_GET_NB_IDD_MAX GetNbIddMax;                                    ///< Method: Gets NB P-state maximum current required
+  PF_CPU_AP_INITIAL_LAUNCH LaunchApCore;                                ///< Method: Launches the desired core from the reset vector.
+  PF_CPU_NUMBER_OF_PHYSICAL_CORES GetNumberOfPhysicalCores;             ///< Method: Get the number of physical cores of current processor.
+  PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE GetApMailboxFromHardware;     ///< Method: Get the AP's topology info from the hardware mailbox.
+  PF_CPU_SET_AP_CORE_NUMBER SetApCoreNumber;                            ///< Method: Set the AP's core number to the hardware mailbox.
+  PF_CPU_GET_AP_CORE_NUMBER GetApCoreNumber;                            ///< Method: Get the AP's core number from hardware.
+  PF_CPU_TRANSFER_AP_CORE_NUMBER TransferApCoreNumber;                  ///< Method: Move the AP's core number from the mailbox to hardware.
+  PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID CoreIdPositionInInitialApicId; ///< Method: Which bits in initial APIC Id are the Core Id.
+  PF_CPU_SAVE_FEATURES SaveFeatures;                                    ///< Method: Get least common features set of all CPUs and save them to CPU_FEATURES_LIST
+  PF_CPU_WRITE_FEATURES WriteFeatures;                                  ///< Method: Get least common features from CPU_FEATURES_LIST and write them to CPU
+  PF_CPU_SET_WARM_RESET_FLAG SetWarmResetFlag;                          ///< Method: Set Warm Reset Flag
+  PF_CPU_GET_WARM_RESET_FLAG GetWarmResetFlag;                          ///< Method: Get Warm Reset Flag
+  PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetBrandString1;                     ///< Method: Get a Brand String table
+  PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetBrandString2;                     ///< Method: Get a Brand String table
+  PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetMicroCodePatchesStruct;           ///< Method: Get microcode patches
+  PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetMicrocodeEquivalenceTable;        ///< Method: Get CPU equivalence for loading microcode patches.
+  PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetCacheInfo;                        ///< Method: Get setup for cache use and initialization.
+  PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetSysPmTableStruct;                 ///< Method: Get Power Management settings.
+  PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetWheaInitData;                     ///< Method: Get Whea Initial Data.
+  PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO GetPlatformTypeSpecificInfo;   ///< Method: Get Specific platform Type features.
+  PF_IS_NB_PSTATE_ENABLED IsNbPstateEnabled;                            ///< Method: Get whether Northbridge PStates feature is enabled.
+  PF_NEXT_LINK_HAS_HTFPY_FEATS NextLinkHasHtPhyFeats;                   ///< Method: Iterate over HT Links matching features, for HT PHY entries.
+  PF_SET_HT_PHY_REGISTER SetHtPhyRegister;                              ///< Method: Set an Ht Phy register based on table entry.
+  PF_GET_NEXT_HT_LINK_FEATURES GetNextHtLinkFeatures;                   ///< Method: Iterate over HT links, returning link features.
+  REGISTER_TABLE **RegisterTableList;                                   ///< Public Data: The available register tables.
+  TABLE_ENTRY_TYPE_DESCRIPTOR *TableEntryTypeDescriptors;               ///< Public Data: implemented register table entry types.
+  PACKAGE_HTLINK_MAP PackageLinkMap;                                    ///< Public Data: translate northbridge HT links to package level links, or NULL.
+  CORE_PAIR_MAP *CorePairMap;                                           ///< Public Data: translate compute unit core pairing, or NULL.
+  FAMILY_CACHE_INIT_POLICY InitCacheDisabled;                           ///< public Data: Family related information.
+  PF_GET_EARLY_INIT_TABLE GetEarlyInitOnCoreTable;                      ///< Method: Get the initialization steps needed at AmdInitEarly.
+};
+
+/**
+ * A Family Id and an interface to it's implementations of Family Specific Services.
+ *
+ * Note that this is a logical family id, which may specify family, model (or even stepping).
+ */
+typedef struct {
+  UINT64          Family;                         ///< The Family to which this interface belongs.
+  CONST VOID      *TablePtr;                      ///< The interface to its Family Specific Services.
+} CPU_SPECIFIC_SERVICES_XLAT;
+
+/**
+ * A collection of Family specific interfaces to Family Specific services.
+ */
+typedef struct {
+  UINT8  Elements;                                       ///< The number of tables to search.
+  CONST    CPU_SPECIFIC_SERVICES_XLAT *FamilyTable;      ///< The family interfaces.
+} CPU_FAMILY_SUPPORT_TABLE;
+
+/**
+ * Implement the translation of a logical CPU id to an id that can be used to get Family specific services.
+ */
+typedef struct {
+  UINT32 Family;                                              ///< Provide translation for this family
+  CPU_LOGICAL_ID UnknownRevision;                             ///< In this family, unrecognized models (or steppings) are treated as though they were this model and stepping.
+  CONST    PF_CPU_GET_SUBFAMILY_ID_ARRAY *SubFamilyIdTable;   ///< Method: Get family specific model (and stepping) resolution.
+  UINT8  Elements;                                            ///< The number of family specific model tables pointed to by SubFamilyIdTable
+} CPU_LOGICAL_ID_FAMILY_XLAT;
+
+/**
+ * A collection of all available family id translations.
+ */
+typedef struct {
+  UINT8  Elements;                                            ///< The number of family translation items to search.
+  CONST    CPU_LOGICAL_ID_FAMILY_XLAT *FamilyIdTable;         ///< The family translation items.
+} CPU_FAMILY_ID_XLAT_TABLE;
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+/**
+ * Get a logical identifier for the specified processor, based on CPUID, but independent of CPUID formatting.
+ */
+VOID
+GetLogicalIdOfSocket (
+  IN       UINT32 Socket,
+     OUT   CPU_LOGICAL_ID *LogicalId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * Get a logical identifier for the executing core, based on CPUID, but independent of CPUID formatting.
+ */
+VOID
+GetLogicalIdOfCurrentCore (
+     OUT   CPU_LOGICAL_ID *LogicalId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * Get a logical identifier for the specified CPUID value.
+ */
+VOID
+GetLogicalIdFromCpuid (
+  IN       UINT32 RawCpuid,
+     OUT   CPU_LOGICAL_ID *LogicalId,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ *  Retrieves a pointer to the desired processor's family specific services structure.
+ */
+VOID
+GetCpuServicesOfSocket (
+  IN       UINT32 Socket,
+     OUT   CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ *  Retrieves a pointer to the desired processor's family specific services structure.
+ */
+VOID
+GetFeatureServicesOfSocket (
+  IN       CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+  IN       UINT32            Socket,
+     OUT   CONST VOID        **CpuServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ *  Retrieves a pointer to the executing core's family specific services structure.
+ */
+VOID
+GetCpuServicesOfCurrentCore (
+     OUT   CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ *  Retrieves a pointer to the executing core's family specific services structure.
+ */
+VOID
+GetFeatureServicesOfCurrentCore (
+  IN       CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+     OUT   CONST VOID        **CpuServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ *  Retrieves a pointer to the family specific services structure for a processor
+ *  with the given logical ID.
+ */
+VOID
+GetCpuServicesFromLogicalId (
+  IN       CPU_LOGICAL_ID *LogicalId,
+     OUT   CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ *  Retrieves a pointer to the family specific services structure for a processor
+ *  with the given logical ID.
+ */
+VOID
+GetFeatureServicesFromLogicalId (
+  IN       CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+  IN       CPU_LOGICAL_ID    *LogicalId,
+     OUT   CONST VOID        **CpuServices,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * Used by logical families which don't need a certain register setting table or other data array.
+ */
+VOID
+GetEmptyArray (
+  IN       CPU_SPECIFIC_SERVICES  *FamilySpecificServices,
+     OUT   CONST VOID **Empty,
+     OUT   UINT8 *NumberOfElements,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+#endif  // _CPU_FAMILY_TRANSLATION_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuGeneralServices.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuGeneralServices.c
new file mode 100644
index 0000000000..6825b009bd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuGeneralServices.c
@@ -0,0 +1,1237 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Implement External, AGESA Common, and CPU component General Services.
+ *
+ * Contains implementation of the interfaces: General Services API in AGESA.h,
+ * GeneralServices.h, and cpuServices.h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                            M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Options.h"
+#include "Topology.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuServices.h"
+#include "heapManager.h"
+#include "cpuApicUtilities.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_CPUGENERALSERVICES_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTIONS_CONFIG_TOPOLOGY TopologyConfiguration;
+extern BUILD_OPT_CFG UserOptions;
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *            E X P O R T E D    F U N C T I O N S - External General Services API
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Get a specified Core's APIC ID.
+ *
+ * Invoke corresponding Cpu Service for external user.
+ *
+ * @param[in,out]    AmdParamApic    Our interface struct
+ *
+ * @return         The most severe status of any called service.
+ */
+AGESA_STATUS
+AmdGetApicId (
+  IN OUT   AMD_APIC_PARAMS *AmdParamApic
+  )
+{
+  AGESA_STATUS AgesaStatus;
+
+  AGESA_TESTPOINT (TpIfAmdGetApicIdEntry, &AmdParamApic->StdHeader);
+  AmdParamApic->StdHeader.HeapBasePtr = HeapGetBaseAddress (&AmdParamApic->StdHeader);
+
+  AmdParamApic->IsPresent = GetApicId (
+    &AmdParamApic->StdHeader,
+    AmdParamApic->Socket,
+    AmdParamApic->Core,
+    &AmdParamApic->ApicAddress,
+    &AgesaStatus
+    );
+
+  AGESA_TESTPOINT (TpIfAmdGetApicIdExit, &AmdParamApic->StdHeader);
+  return AgesaStatus;
+}
+
+/**
+ * Get Processor Module's PCI Config Space address.
+ *
+ * Invoke corresponding Cpu Service for external user.
+ *
+ * @param[in,out]    AmdParamGetPci    Our interface struct
+ *
+ * @return         The most severe status of any called service.
+ */
+AGESA_STATUS
+AmdGetPciAddress (
+  IN OUT   AMD_GET_PCI_PARAMS *AmdParamGetPci
+  )
+{
+  AGESA_STATUS AgesaStatus;
+
+  AGESA_TESTPOINT (TpIfAmdGetPciAddressEntry, &AmdParamGetPci->StdHeader);
+  AmdParamGetPci->StdHeader.HeapBasePtr = HeapGetBaseAddress (&AmdParamGetPci->StdHeader);
+
+  AmdParamGetPci->IsPresent = GetPciAddress (
+    &AmdParamGetPci->StdHeader,
+    AmdParamGetPci->Socket,
+    AmdParamGetPci->Module,
+    &AmdParamGetPci->PciAddress,
+    &AgesaStatus
+    );
+
+  AGESA_TESTPOINT (TpIfAmdGetPciAddressExit, &AmdParamGetPci->StdHeader);
+  return AgesaStatus;
+}
+
+/**
+ * "Who am I" for the current running core.
+ *
+ * Invoke corresponding Cpu Service for external user.
+ *
+ * @param[in,out]    AmdParamIdentify    Our interface struct
+ *
+ * @return         The most severe status of any called service.
+ */
+AGESA_STATUS
+AmdIdentifyCore (
+  IN OUT   AMD_IDENTIFY_PARAMS *AmdParamIdentify
+  )
+{
+  AGESA_STATUS AgesaStatus;
+  UINT32 Socket;
+  UINT32 Module;
+  UINT32 Core;
+
+  AGESA_TESTPOINT (TpIfAmdIdentifyCoreEntry, &AmdParamIdentify->StdHeader);
+  AmdParamIdentify->StdHeader.HeapBasePtr = HeapGetBaseAddress (&AmdParamIdentify->StdHeader);
+
+  IdentifyCore (
+    &AmdParamIdentify->StdHeader,
+    &Socket,
+    &Module,
+    &Core,
+    &AgesaStatus
+    );
+  AmdParamIdentify->Socket = (UINT8)Socket;
+  AmdParamIdentify->Module = (UINT8)Module;
+  AmdParamIdentify->Core = (UINT8)Core;
+
+  AGESA_TESTPOINT (TpIfAmdIdentifyCoreExit, &AmdParamIdentify->StdHeader);
+  return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------
+ *            E X P O R T E D    F U N C T I O N S - AGESA common General Services
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get a specified Core's APIC ID.
+ *
+ * Code sync: This calculation MUST match the assignment
+ *    calculation done in LocalApicInitializationAtEarly function.
+ *
+ * @param[in]    StdHeader    Header for library and services.
+ * @param[in]    Socket       The socket in which the Core's Processor is installed.
+ * @param[in]    Core         The Core id.
+ * @param[out]   ApicAddress  The Core's APIC ID.
+ * @param[out]   AgesaStatus  Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ * @retval       TRUE         The core is present, APIC Id valid
+ * @retval       FALSE        The core is not present, APIC Id not valid.
+*/
+BOOLEAN
+GetApicId (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT32            Socket,
+  IN       UINT32            Core,
+     OUT   UINT8             *ApicAddress,
+     OUT   AGESA_STATUS      *AgesaStatus
+  )
+{
+  BOOLEAN ReturnValue;
+  UINT32  CoreCount;
+  UINT32  ApicID;
+
+  ReturnValue = FALSE;
+  if (GetActiveCoresInGivenSocket (Socket, &CoreCount, StdHeader)) {
+    if (Core < CoreCount) {
+      ReturnValue = TRUE;
+      GetLocalApicIdForCore (Socket, Core, &ApicID, StdHeader);
+      *ApicAddress = (UINT8) ApicID;
+    }
+  }
+
+  // Always Succeeds.
+  *AgesaStatus = AGESA_SUCCESS;
+
+  return ReturnValue;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get Processor Module's PCI Config Space address.
+ *
+ * @param[in]    StdHeader    Header for library and services.
+ * @param[in]    Socket       The Core's Socket.
+ * @param[in]    Module       The Module in that Processor
+ * @param[out]   PciAddress   The Processor's PCI Config Space address (Function 0, Register 0)
+ * @param[out]   AgesaStatus  Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ * @retval       TRUE         The core is present, PCI Address valid
+ * @retval       FALSE        The core is not present, PCI Address not valid.
+ */
+BOOLEAN
+GetPciAddress (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT32            Socket,
+  IN       UINT32            Module,
+     OUT   PCI_ADDR          *PciAddress,
+     OUT   AGESA_STATUS      *AgesaStatus
+  )
+{
+  UINT8        Node;
+  BOOLEAN      Result;
+
+  ASSERT (Socket < MAX_SOCKETS);
+  ASSERT (Module < MAX_DIES);
+
+  Result = TRUE;
+  // Always Succeeds.
+  *AgesaStatus = AGESA_SUCCESS;
+
+  if (GetNodeId (Socket, Module, &Node, StdHeader)) {
+    // socket is populated
+    PciAddress->AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+    PciAddress->Address.Device = PciAddress->Address.Device + Node;
+  } else {
+    // socket is not populated
+    PciAddress->AddressValue = ILLEGAL_SBDFO;
+    Result = FALSE;
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * "Who am I" for the current running core.
+ *
+ * @param[in]    StdHeader    Header for library and services.
+ * @param[out]   Socket       The current Core's Socket
+ * @param[out]   Module       The current Core's Processor Module
+ * @param[out]   Core         The current Core's core id.
+ * @param[out]   AgesaStatus  Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ */
+VOID
+IdentifyCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+     OUT   UINT32            *Socket,
+     OUT   UINT32            *Module,
+     OUT   UINT32            *Core,
+     OUT   AGESA_STATUS      *AgesaStatus
+  )
+{
+  AP_MAIL_INFO ApMailboxInfo;
+  UINT32 CurrentCore;
+
+  // Always Succeeds.
+  *AgesaStatus = AGESA_SUCCESS;
+
+  GetApMailbox (&ApMailboxInfo.Info, StdHeader);
+  ASSERT (ApMailboxInfo.Fields.Socket < MAX_SOCKETS);
+  ASSERT (ApMailboxInfo.Fields.Module < MAX_DIES);
+  *Socket = (UINT8)ApMailboxInfo.Fields.Socket;
+  *Module = (UINT8)ApMailboxInfo.Fields.Module;
+
+  // Get Core Id
+  GetCurrentCore (&CurrentCore, StdHeader);
+  *Core = (UINT8)CurrentCore;
+}
+
+
+/*----------------------------------------------------------------------------------------
+ *            E X P O R T E D    F U N C T I O N S - cpu component General Services
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the current Platform's number of Sockets, regardless of how many are populated.
+ *
+ * The Options component can provide how many sockets are available in system.
+ * This can be used to avoid testing presence of Processors in Sockets which don't exist.
+ * The result can be one socket to the maximum possible sockets of any supported processor family.
+ * You cannot assume that all sockets contain a processor or that the sockets have processors
+ * installed in any particular order.  Do not convert this number to a number of nodes.
+ *
+ * @return   The number of available sockets for the platform.
+ *
+ */
+UINT32
+GetPlatformNumberOfSockets ( VOID )
+{
+  return TopologyConfiguration.PlatformNumberOfSockets;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the number of Modules to check presence in each Processor.
+ *
+ * The Options component can provide how many modules need to be check for presence in each
+ * processor, regardless whether all, or any, processor have that many modules present on this boot.
+ * The result can be one module to the maximum possible modules of any supported processor family.
+ * You cannot assume that Modules are in any particular order, especially with respect to node id.
+ *
+ * @return   The maximum number of modules in each processor.
+ *
+ */
+UINT32
+GetPlatformNumberOfModules ( VOID )
+{
+  return TopologyConfiguration.PlatformNumberOfModules;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is a processor present in Socket?
+ *
+ * Check to see if any possible module of the processor is present.  This provides
+ * support for a few cases where a PCI address isn't needed, but code still needs to
+ * iterate by Socket.
+ *
+ * @param[in]   Socket  The socket which is being tested
+ * @param[in]   StdHeader    Header for library and services.
+ *
+ * @retval      TRUE    The socket has a processor installed
+ * @retval      FALSE   The socket is empty (or the processor is dead).
+ *
+ */
+BOOLEAN
+IsProcessorPresent (
+  IN       UINT32             Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  SOCKET_DIE_TO_NODE_MAP  pSocketDieMap;
+  LOCATE_HEAP_PTR  SocketDieHeapDataBlock;
+  BOOLEAN Result;
+  UINT32 Module;
+  AGESA_STATUS Status;
+
+  ASSERT (Socket < MAX_SOCKETS);
+  Result = FALSE;
+  SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+
+  //  Get data block from heap
+  Status = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+  pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+  ASSERT ((pSocketDieMap != NULL) && (Status == AGESA_SUCCESS));
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if ((*pSocketDieMap)[Socket][Module].Node != 0xFF) {
+      Result = TRUE;
+      break;
+    }
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provide the number of installed processors (not Nodes! and not Sockets!)
+ *
+ * Iterate over the Socket, Module to Node Map, counting the number of present nodes.
+ * Do not use this as a Node Count!  Do not use this as the number of Sockets!  (This
+ * is for APIC ID utilities.)
+ *
+ * @param[in]   StdHeader    Header for library and services.
+ *
+ * @return      the number of processors installed
+ *
+ */
+UINT32
+GetNumberOfProcessors (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  SOCKET_DIE_TO_NODE_MAP  pSocketDieMap;
+  LOCATE_HEAP_PTR  SocketDieHeapDataBlock;
+  UINT32 Result;
+  UINT32 Socket;
+  UINT32 Module;
+  AGESA_STATUS Status;
+
+  Result = 0;
+  SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+
+  //  Get data block from heap
+  Status = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+  pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+  ASSERT ((pSocketDieMap != NULL) && (Status == AGESA_SUCCESS));
+  for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+    for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+      if ((*pSocketDieMap)[Socket][Module].Node != 0xFF) {
+        Result++;
+        break;
+      }
+    }
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * For a specific Node, get its Socket and Module ids.
+ *
+ * If asking for the current running Node, read the mailbox socket, module. Specific Node,
+ * locate the Node to Socket/Module Map in heap, and return the ids, if present.
+ *
+ * @param[in]    Node         What Socket and Module is this Node?
+ * @param[out]   Socket       The Socket containing that Node.
+ * @param[out]   Module       The Processor Module of that Node.
+ * @param[in]    StdHeader    Header for library and services.
+ *
+ * @retval TRUE Node is present, Socket, Module are valid.
+ * @retval FALSE Node is not present, why do you ask?
+ */
+BOOLEAN
+GetSocketModuleOfNode (
+  IN       UINT32    Node,
+     OUT   UINT32    *Socket,
+     OUT   UINT32    *Module,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  NODE_TO_SOCKET_DIE_MAP  pNodeMap;
+  LOCATE_HEAP_PTR  SocketDieHeapDataBlock;
+  BOOLEAN Result;
+  AGESA_STATUS Status;
+
+  Result = FALSE;
+
+  ASSERT (Node < MAX_NODES);
+
+  //  Get Map from heap
+  SocketDieHeapDataBlock.BufferHandle = NODE_ID_MAP_HANDLE;
+  Status = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+  pNodeMap = (NODE_TO_SOCKET_DIE_MAP)SocketDieHeapDataBlock.BufferPtr;
+  ASSERT ((pNodeMap != NULL) && (Status == AGESA_SUCCESS));
+  *Socket = (*pNodeMap)[Node].Socket;
+  *Module = (*pNodeMap)[Node].Die;
+  if ((*pNodeMap)[Node].Socket != 0xFF) {
+    Result = TRUE;
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the current core's Processor APIC Index.
+ *
+ * The Processor APIC Index is the position of the current processor in the APIC id
+ * assignment.  Processors are ordered in node id order.  This is not the same, however,
+ * as the node id of the current socket and module or the current socket id.
+ *
+ * @param[in]    Node      The current desired core's node id (usually the current core).
+ * @param[in]    StdHeader Header for library and services.
+ *
+ * @return  Processor APIC Index
+ *
+ */
+UINT32
+GetProcessorApicIndex (
+  IN       UINT32            Node,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 ProcessorApicIndex;
+  UINT32 PreviousSocket;
+  UINT32 CurrentSocket;
+  UINT32 Ignored;
+  UINT32 i;
+
+  ASSERT (Node < MAX_NODES);
+
+  // Calculate total APIC devices up to Current Node, Core.
+  ProcessorApicIndex = 0;
+  PreviousSocket = 0xFF;
+  for (i = 0; i < (Node + 1); i++) {
+    GetSocketModuleOfNode (i, &CurrentSocket, &Ignored, StdHeader);
+    if (CurrentSocket != PreviousSocket) {
+      ProcessorApicIndex++;
+      PreviousSocket = CurrentSocket;
+    }
+  }
+  // Convert to Index (zero based) from count (one based).
+  ProcessorApicIndex--;
+  return ProcessorApicIndex;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Returns current node number
+ *
+ *  @param[out]      Node       This Core's Node id
+ *  @param[in]        StdHeader  Header for library and services.
+ *
+ */
+VOID
+GetCurrentNodeNum (
+     OUT   UINT32 *Node,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  AP_MAIL_INFO ApMailboxInfo;
+
+  // Get the Node Id from the Mailbox.
+  GetApMailbox (&ApMailboxInfo.Info, StdHeader);
+  ASSERT (ApMailboxInfo.Fields.Node < MAX_NODES);
+  *Node = ApMailboxInfo.Fields.Node;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns Total number of active cores in the current socket
+ *
+ * @param[out]     CoreCount    The cores in this processor.
+ * @param[in]      StdHeader    Header for library and services.
+ *
+ */
+VOID
+GetActiveCoresInCurrentSocket (
+     OUT   UINT32 *CoreCount,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPUID_DATA  CpuidDataStruct;
+  UINT32 TotalCoresCount;
+
+  LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuidDataStruct, StdHeader);
+  TotalCoresCount = (CpuidDataStruct.ECX_Reg & 0x000000FF) + 1;
+  *CoreCount = TotalCoresCount;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provides the Total number of active cores in the current core's node.
+ *
+ * @param[in]      StdHeader   Header for library and services.
+ *
+ * @return         The current node core count
+ */
+UINTN
+GetActiveCoresInCurrentModule (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32 Socket;
+  UINT32 Module;
+  UINT32 Core;
+  UINT32 LowCore;
+  UINT32 HighCore;
+  UINT32 ProcessorCoreCount;
+  AGESA_STATUS AgesaStatus;
+
+  ProcessorCoreCount = 0;
+
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &AgesaStatus);
+  if (GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader)) {
+    ProcessorCoreCount = ((HighCore - LowCore) + 1);
+  }
+  return ProcessorCoreCount;
+}
+
+/**
+ * Provide the number of compute units on current module.
+ *
+ *
+ * @param[in]   StdHeader    Header for library and services.
+ *
+ * @return      The current compute unit counts.
+ *
+ */
+UINTN
+GetNumberOfCompUnitsInCurrentModule (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32                 Socket;
+  UINT32                 Module;
+  UINT32                 CurrentCore;
+  UINT32                 ComputeUnitCount;
+  UINT32                 Enabled;
+  AGESA_STATUS           IgnoredSts;
+  LOCATE_HEAP_PTR        SocketDieHeapDataBlock;
+  SOCKET_DIE_TO_NODE_MAP pSocketDieMap;
+
+  ComputeUnitCount = 0;
+
+  ASSERT ((GetComputeUnitMapping (StdHeader) == AllCoresMapping) ||
+          (GetComputeUnitMapping (StdHeader) == EvenCoresMapping));
+
+  IdentifyCore (StdHeader, &Socket, &Module, &CurrentCore, &IgnoredSts);
+  //  Get data block from heap
+  SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+  IgnoredSts = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+  pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+  ASSERT ((pSocketDieMap != NULL) && (IgnoredSts == AGESA_SUCCESS));
+  // Current Core's socket, module must be present.
+  ASSERT ((*pSocketDieMap)[Socket][Module].Node != 0xFF);
+  // Process compute unit info
+  Enabled = (*pSocketDieMap)[Socket][Module].EnabledComputeUnits;
+
+  while (Enabled > 0) {
+    if ((Enabled & 0x1) != 0) {
+      ComputeUnitCount++;
+    }
+    Enabled >>= 1;
+  }
+
+  return ComputeUnitCount;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provides the Total number of active cores in the given socket.
+ *
+ * @param[in]      Socket      Get a core count for the processor in this socket.
+ * @param[out]     CoreCount   Its core count
+ * @param[in]      StdHeader   Header for library and services.
+ *
+ * @retval     TRUE    A processor is present in the Socket and the CoreCount is valid.
+ * @retval     FALSE   The Socket does not have a Processor
+ */
+BOOLEAN
+GetActiveCoresInGivenSocket (
+  IN       UINT32             Socket,
+     OUT   UINT32             *CoreCount,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32 Module;
+  UINT32 LowCore;
+  UINT32 HighCore;
+  UINT32 ProcessorCoreCount;
+  BOOLEAN Result;
+
+  Result = FALSE;
+  ProcessorCoreCount = 0;
+
+  for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+    if (GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader)) {
+      ProcessorCoreCount = ProcessorCoreCount + ((HighCore - LowCore) + 1);
+      Result = TRUE;
+    } else {
+      break;
+    }
+  }
+  *CoreCount = ProcessorCoreCount;
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provides the range of Cores in a Processor which are in a Module.
+ *
+ * Cores are named uniquely in a processor, 0 to TotalCores.  Any module in the processor has
+ * a set of those cores, named from LowCore to HighCore.
+ *
+ * @param[in]      Socket      Get a core range for the processor in this socket.
+ * @param[in]      Module      Get a core range for this Module in the processor.
+ * @param[out]     LowCore     The lowest Processor Core in the Module.
+ * @param[out]     HighCore    The highest Processor Core in the Module.
+ * @param[in]      StdHeader   Header for library and services.
+ *
+ * @retval     TRUE    A processor is present in the Socket and the Core Range is valid.
+ * @retval     FALSE   The Socket does not have a Processor
+ */
+BOOLEAN
+GetGivenModuleCoreRange (
+  IN       UINT32            Socket,
+  IN       UINT32            Module,
+     OUT   UINT32            *LowCore,
+     OUT   UINT32            *HighCore,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  SOCKET_DIE_TO_NODE_MAP  pSocketDieMap;
+  LOCATE_HEAP_PTR  SocketDieHeapDataBlock;
+  BOOLEAN Result;
+  AGESA_STATUS Status;
+
+  ASSERT (Socket < MAX_SOCKETS);
+  ASSERT (Module < MAX_DIES);
+  Result = FALSE;
+  SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+
+  //  Get data block from heap
+  Status = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+  pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+  ASSERT ((pSocketDieMap != NULL) && (Status == AGESA_SUCCESS));
+  *LowCore = (*pSocketDieMap)[Socket][Module].LowCore;
+  *HighCore = (*pSocketDieMap)[Socket][Module].HighCore;
+  if ((*pSocketDieMap)[Socket][Module].Node != 0xFF) {
+    Result = TRUE;
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the current running core number.
+ *
+ * @param[out]     Core       The core id.
+ * @param[in]      StdHeader  Header for library and services.
+ *
+ */
+VOID
+GetCurrentCore (
+     OUT   UINT32 *Core,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  CPUID_DATA  CpuidDataStruct;
+  UINT32      LocalApicId;
+  UINT32      ApicIdCoreIdSize;
+  CORE_ID_POSITION      InitApicIdCpuIdLo;
+  CPU_SPECIFIC_SERVICES *FamilyServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+  ASSERT (FamilyServices != NULL);
+
+  //  Read CPUID ebx[31:24] to get initial APICID
+  LibAmdCpuidRead (AMD_CPUID_APICID_LPC_BID, &CpuidDataStruct, StdHeader);
+  LocalApicId = (CpuidDataStruct.EBX_Reg & 0xFF000000) >> 24;
+
+  // Find the core ID size.
+  LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuidDataStruct, StdHeader);
+  ApicIdCoreIdSize = (CpuidDataStruct.ECX_Reg & 0x0000F000) >> 12;
+
+  InitApicIdCpuIdLo = FamilyServices->CoreIdPositionInInitialApicId (FamilyServices, StdHeader);
+  ASSERT (InitApicIdCpuIdLo < CoreIdPositionMax);
+
+  // Now extract the core ID from the Apic ID by right justifying the id and masking off non-core Id bits.
+  *Core = ((LocalApicId >> ((1 - (UINT32)InitApicIdCpuIdLo) * (MAX_CORE_ID_SIZE - ApicIdCoreIdSize))) &
+             (MAX_CORE_ID_MASK >> (MAX_CORE_ID_SIZE - ApicIdCoreIdSize)));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns current node, and core number.
+ *
+ * @param[out]     Node         The node id of the current core's node.
+ * @param[out]     Core         The core id if the current core.
+ * @param[in]      StdHeader    Config handle for library and services.
+ *
+ */
+VOID
+GetCurrentNodeAndCore (
+     OUT   UINT32 *Node,
+     OUT   UINT32 *Core,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  // Get Node Id
+  GetCurrentNodeNum (Node, StdHeader);
+
+  // Get Core Id
+  GetCurrentCore (Core, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Is the current core a primary core of it's node?
+ *
+ *  @param[in]  StdHeader   Config handle for library and services.
+ *
+ *  @retval        TRUE  Is Primary Core
+ *  @retval        FALSE Is not Primary Core
+ *
+ */
+BOOLEAN
+IsCurrentCorePrimary (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN Result;
+  UINT32 Core;
+  UINT32 Socket;
+  UINT32 Module;
+  UINT32 PrimaryCore;
+  UINT32 IgnoredCore;
+  AGESA_STATUS IgnoredSts;
+
+  Result = FALSE;
+
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+  GetGivenModuleCoreRange (Socket, Module, &PrimaryCore, &IgnoredCore, StdHeader);
+  if (Core == PrimaryCore) {
+    Result = TRUE;
+  }
+  return Result;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns node id based on SocketId and ModuleId.
+ *
+ * @param[in]  SocketId       The socket to look up
+ * @param[in]  ModuleId       The module in that socket
+ * @param[out] NodeId         Provide the corresponding Node Id.
+ * @param[in]  StdHeader   Handle of Header for calling lib functions and services.
+ *
+ * @retval     TRUE       The socket is populated
+ * @retval     FALSE      The socket is not populated
+ *
+ */
+BOOLEAN
+GetNodeId (
+  IN       UINT32  SocketId,
+  IN       UINT32  ModuleId,
+     OUT   UINT8   *NodeId,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  SOCKET_DIE_TO_NODE_MAP  pSocketDieMap;
+  LOCATE_HEAP_PTR  SocketDieHeapDataBlock;
+  BOOLEAN Result;
+  AGESA_STATUS Status;
+
+  Result = FALSE;
+  SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+
+  //  Get data block from heap
+  Status = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+  pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+  ASSERT ((pSocketDieMap != NULL) && (Status == AGESA_SUCCESS));
+  *NodeId = (*pSocketDieMap)[SocketId][ModuleId].Node;
+  if ((*pSocketDieMap)[SocketId][ModuleId].Node != 0xFF) {
+    Result = TRUE;
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the cached AP Mailbox Info if available, or read the info from the hardware.
+ *
+ * Locate the known AP Mailbox Info Cache buffer in this core's local heap.  If it
+ * doesn't exist, read the hardware to get the info.
+ * This routine gets the main AP mailbox, not the system degree.
+ *
+ * @param[out]    ApMailboxInfo  Provide the info in this AP core's mailbox
+ * @param[in]     StdHeader      Config handle for library and services.
+ *
+ */
+VOID
+GetApMailbox (
+     OUT   UINT32               *ApMailboxInfo,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  )
+{
+  AGESA_STATUS     Ignored;
+  LOCATE_HEAP_PTR  LocalApMailboxCache;
+  CPU_SPECIFIC_SERVICES *FamilyServices;
+  AP_MAILBOXES     ApMailboxes;
+  BOOLEAN IamBsp;
+
+  IamBsp = IsBsp (StdHeader, &Ignored);
+  LocalApMailboxCache.BufferHandle = LOCAL_AP_MAIL_BOX_CACHE_HANDLE;
+  if (((StdHeader->HeapStatus == HEAP_LOCAL_CACHE) || IamBsp) &&
+      (HeapLocateBuffer (&LocalApMailboxCache, StdHeader) == AGESA_SUCCESS)) {
+    // If during HEAP_LOCAL_CACHE stage, we always try to get ApMailbox from heap
+    // If we're not in HEAP_LOCAL_CACHE stage, only BSP can get ApMailbox from heap
+    *ApMailboxInfo = ((AP_MAILBOXES *) LocalApMailboxCache.BufferPtr)->ApMailInfo.Info;
+  } else if (!IamBsp) {
+    // If this is an AP, the hardware register should be good.
+    GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+    ASSERT (FamilyServices != NULL);
+    FamilyServices->GetApMailboxFromHardware (FamilyServices, &ApMailboxes, StdHeader);
+    *ApMailboxInfo = ApMailboxes.ApMailInfo.Info;
+  } else {
+    // This is the BSC.  The hardware mailbox has not been set up yet.
+    ASSERT (FALSE);
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Cache the Ap Mailbox info in our local heap for later use.
+ *
+ * This enables us to use the info even after the mailbox register is initialized
+ * with operational values.  Get all the AP mailboxes and keep them in one buffer.
+ *
+ * @param[in]     StdHeader   Config handle for library and services.
+ *
+ */
+VOID
+CacheApMailbox (
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  )
+{
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  AP_MAILBOXES ApMailboxes;
+  CPU_SPECIFIC_SERVICES *FamilyServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+  ASSERT (FamilyServices != NULL);
+
+  // Get mailbox from hardware.
+  FamilyServices->GetApMailboxFromHardware (FamilyServices, &ApMailboxes, StdHeader);
+
+  // Allocate heap for the info
+  AllocHeapParams.RequestedBufferSize = sizeof (AP_MAILBOXES);
+  AllocHeapParams.BufferHandle = LOCAL_AP_MAIL_BOX_CACHE_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+    *(AP_MAILBOXES *)AllocHeapParams.BufferPtr = ApMailboxes;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Compute the degree of the system.
+ *
+ * The degree of a system is the maximum degree of any node.  The degree of a node is the
+ * number of nodes to which it is directly connected (not considering width or redundant
+ * links).
+ *
+ * @param[in]     StdHeader            Config handle for library and services.
+ *
+ */
+UINTN
+GetSystemDegree (
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  AP_MAILBOXES *ApMailboxes;
+  LOCATE_HEAP_PTR  LocalApMailboxCache;
+  AGESA_STATUS Status;
+
+  //  Get data block from heap
+  LocalApMailboxCache.BufferHandle = LOCAL_AP_MAIL_BOX_CACHE_HANDLE;
+  Status = HeapLocateBuffer (&LocalApMailboxCache, StdHeader);
+  // non-Success handled by ASSERT not NULL below.
+  ApMailboxes = (AP_MAILBOXES *)LocalApMailboxCache.BufferPtr;
+  ASSERT ((ApMailboxes != NULL) && (Status == AGESA_SUCCESS));
+  return ApMailboxes->ApMailExtInfo.Fields.SystemDegree;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Spins until the number of microseconds specified have
+ *  expired regardless of CPU operational frequency.
+ *
+ *  @param[in]   Microseconds  Wait time in microseconds
+ *  @param[in]   StdHeader     Header for library and services
+ *
+ */
+VOID
+WaitMicroseconds (
+  IN       UINT32 Microseconds,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 TscRateInMhz;
+  UINT64 NumberOfTicks;
+  UINT64 InitialTsc;
+  UINT64 CurrentTsc;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  LibAmdMsrRead (TSC, &InitialTsc, StdHeader);
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->GetTscRate (FamilySpecificServices, &TscRateInMhz, StdHeader);
+  NumberOfTicks = Microseconds * TscRateInMhz;
+  do {
+    LibAmdMsrRead (TSC, &CurrentTsc, StdHeader);
+  } while ((CurrentTsc - InitialTsc) < NumberOfTicks);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  A boolean function determine executed CPU is BSP core.
+ *
+ *  @param[in,out]   StdHeader        Header for library and services
+ *  @param[out]      AgesaStatus      Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ */
+BOOLEAN
+IsBsp (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+     OUT   AGESA_STATUS      *AgesaStatus
+  )
+{
+  UINT64 MsrData;
+
+  // Always Succeeds.
+  *AgesaStatus = AGESA_SUCCESS;
+
+  //  Read APIC_BASE register (0x1B), bit[8] returns 1 for BSP
+  LibAmdMsrRead (MSR_APIC_BAR, &MsrData, StdHeader);
+  if ((MsrData & BIT8) != 0 ) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the compute unit mapping algorithm.
+ *
+ * Look up the compute unit values for the current core's socket/module and find the matching
+ * core pair map item.  This will tell us how to determine the core's status.
+ *
+ * @param[in]   StdHeader        Header for library and services
+ *
+ * @retval      AllCoresMapping  Each core is in a compute unit of its own.
+ * @retval      EvenCoresMapping Even/Odd pairs of cores are in each compute unit.
+ */
+COMPUTE_UNIT_MAPPING
+GetComputeUnitMapping (
+  IN      AMD_CONFIG_PARAMS    *StdHeader
+  )
+{
+  UINT32  CurrentCore;
+  UINT32  Module;
+  UINT32  Socket;
+  UINT8   Enabled;
+  UINT8   DualCore;
+  AGESA_STATUS  IgnoredSts;
+  SOCKET_DIE_TO_NODE_MAP  pSocketDieMap;
+  LOCATE_HEAP_PTR  SocketDieHeapDataBlock;
+  CPU_SPECIFIC_SERVICES *FamilyServices;
+  CORE_PAIR_MAP *CorePairMap;
+  COMPUTE_UNIT_MAPPING Result;
+
+  // Invalid mapping, unless we find one.
+  Result = MaxComputeUnitMapping;
+
+  IdentifyCore (StdHeader, &Socket, &Module, &CurrentCore, &IgnoredSts);
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+  ASSERT (FamilyServices != NULL);
+
+  //  Get data block from heap
+  SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+  IgnoredSts = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+  pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+  ASSERT ((pSocketDieMap != NULL) && (IgnoredSts == AGESA_SUCCESS));
+  // Current Core's socket, module must be present.
+  ASSERT ((*pSocketDieMap)[Socket][Module].Node != 0xFF);
+
+  // Process compute unit info
+  Enabled = (*pSocketDieMap)[Socket][Module].EnabledComputeUnits;
+  DualCore = (*pSocketDieMap)[Socket][Module].DualCoreComputeUnits;
+  CorePairMap = FamilyServices->CorePairMap;
+  if ((Enabled != 0) && (CorePairMap != NULL)) {
+    while (CorePairMap->Enabled != 0xFF) {
+      if ((Enabled == CorePairMap->Enabled) && (DualCore == CorePairMap->DualCore)) {
+        break;
+      }
+      CorePairMap++;
+    }
+    // The assert is for finding a processor configured in a way the core pair map doesn't support.
+    ASSERT (CorePairMap->Enabled != 0xFF);
+    Result = CorePairMap->Mapping;
+  } else {
+    // Families that don't have compute units act as though each core is in its own compute unit
+    // and all cores are primary
+    Result = AllCoresMapping;
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is current core the primary core of its compute unit?
+ *
+ * Get the mapping algorithm and the current core number.  Selecting First/Last ordering for
+ * primary @b ASSUMES cores are launched in ascending core number order.
+ *
+ * @param[in]   Selector         Select whether first or last core has the primary core role.
+ * @param[in]   StdHeader        Header for library and services
+ *
+ * @retval       TRUE             This is the primary core of a compute unit.
+ * @retval       FALSE            This is the second shared core of a compute unit.
+ *
+ */
+BOOLEAN
+IsCorePairPrimary (
+  IN       COMPUTE_UNIT_PRIMARY_SELECTOR Selector,
+  IN       AMD_CONFIG_PARAMS            *StdHeader
+  )
+{
+  BOOLEAN Result;
+  UINT32  CurrentCore;
+  UINT32  Module;
+  UINT32  Socket;
+  AGESA_STATUS  IgnoredSts;
+
+  IdentifyCore (StdHeader, &Socket, &Module, &CurrentCore, &IgnoredSts);
+
+  Result = FALSE;
+  switch (GetComputeUnitMapping (StdHeader)) {
+  case AllCoresMapping:
+    // All cores are primaries
+    Result = TRUE;
+    break;
+  case EvenCoresMapping:
+    // Even core numbers are first to execute, odd cores are last to execute
+    if (Selector == FirstCoreIsComputeUnitPrimary) {
+      Result = (BOOLEAN) ((CurrentCore & 1) == 0);
+    } else {
+      Result = (BOOLEAN) ((CurrentCore & 1) != 0);
+    }
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Are the two specified cores shared in a compute unit?
+ *
+ * Look up the compute unit values for the current core's socket/module and find the matching
+ * core pair map item.  This will tell us how to determine the core's status.
+ *
+ * @param[in]   Socket           The processor in this socket is to be checked
+ * @param[in]   Module           The processor in this module is to be checked
+ * @param[in]   CoreA            One of the two cores to check
+ * @param[in]   CoreB            The other core to be checked
+ * @param[in]   StdHeader        Header for library and services
+ *
+ * @retval       TRUE            The cores are in the same compute unit.
+ * @retval       FALSE           The cores are not in the same compute unit, or the processor does
+ *                               not have compute units.
+ *
+ */
+BOOLEAN
+AreCoresPaired (
+  IN       UINT32  Socket,
+  IN       UINT32  Module,
+  IN       UINT32  CoreA,
+  IN       UINT32  CoreB,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN Result;
+
+  Result = FALSE;
+  switch (GetComputeUnitMapping (StdHeader)) {
+  case AllCoresMapping:
+    // No cores are sharing a compute unit
+    Result = FALSE;
+    break;
+  case EvenCoresMapping:
+    // Even core numbers are paired with odd core numbers, n with n + 1
+    if ((CoreA & 1) == 0) {
+      Result = (BOOLEAN) (CoreA == (CoreB - 1));
+    } else {
+      Result = (BOOLEAN) (CoreA == (CoreB + 1));
+    }
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This routine programs the registers necessary to get the PCI MMIO mechanism
+ * up and functioning.
+ *
+ * @param[in]      StdHeader               Pointer to structure containing the function call
+ *                                         whose parameter structure is to be created, the
+ *                                         allocation method, and a pointer to the newly
+ *                                         created structure.
+ *
+ */
+VOID
+InitializePciMmio (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8        EncodedSize;
+  UINT64       LocalMsrRegister;
+
+  // Make sure that Standard header is valid
+  ASSERT (StdHeader != NULL);
+
+  if ((UserOptions.CfgPciMmioAddress != 0) && (UserOptions.CfgPciMmioSize != 0)) {
+    EncodedSize = LibAmdBitScanForward (UserOptions.CfgPciMmioSize);
+    LocalMsrRegister = ((UserOptions.CfgPciMmioAddress | BIT0) | (EncodedSize << 2));
+    LibAmdMsrWrite (MSR_MMIO_Cfg_Base, &LocalMsrRegister, StdHeader);
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuInitEarlyTable.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuInitEarlyTable.c
new file mode 100644
index 0000000000..53bc946c08
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuInitEarlyTable.c
@@ -0,0 +1,125 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize the 'common' way of running early initialization.
+ *
+ * Returns the table of initialization steps to perform at
+ * AmdInitEarly.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_CPUINITEARLYTABLE_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetCommonEarlyInitOnCoreTable (
+  IN       CPU_SPECIFIC_SERVICES                *FamilyServices,
+     OUT   CONST S_PERFORM_EARLY_INIT_ON_CORE   **Table,
+  IN       AMD_CPU_EARLY_PARAMS                 *EarlyParams,
+  IN       AMD_CONFIG_PARAMS                    *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern F_PERFORM_EARLY_INIT_ON_CORE McaInitializationAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE SetRegistersFromTablesAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE SetBrandIdRegistersAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE LocalApicInitializationAtEarly;
+extern F_PERFORM_EARLY_INIT_ON_CORE LoadMicrocodePatchAtEarly;
+
+CONST S_PERFORM_EARLY_INIT_ON_CORE ROMDATA CommonEarlyInitOnCoreTable[] =
+{
+  {McaInitializationAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {SetRegistersFromTablesAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {SetBrandIdRegistersAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {LocalApicInitializationAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {LoadMicrocodePatchAtEarly, PERFORM_EARLY_ANY_CONDITION},
+  {NULL, 0}
+};
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that may be invoked at AmdCpuEarly to return the steps that a
+ * processor that uses the standard initialization steps should take.
+ *
+ *  @CpuServiceMethod{::F_GET_EARLY_INIT_TABLE}.
+ *
+ * @param[in]       FamilyServices    The current Family Specific Services.
+ * @param[out]      Table             Table of appropriate init steps for the executing core.
+ * @param[in]       EarlyParams       Service Interface structure to initialize.
+ * @param[in]       StdHeader         Opaque handle to standard config header.
+ *
+ */
+VOID
+GetCommonEarlyInitOnCoreTable (
+  IN       CPU_SPECIFIC_SERVICES                *FamilyServices,
+     OUT   CONST S_PERFORM_EARLY_INIT_ON_CORE   **Table,
+  IN       AMD_CPU_EARLY_PARAMS                 *EarlyParams,
+  IN       AMD_CONFIG_PARAMS                    *StdHeader
+  )
+{
+  *Table = CommonEarlyInitOnCoreTable;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuLateInit.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuLateInit.c
new file mode 100644
index 0000000000..23eaab4310
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuLateInit.c
@@ -0,0 +1,394 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Late Init API
+ *
+ * Contains code for doing any late CPU initialization.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 51822 $   @e \$Date: 2011-04-27 18:58:43 -0600 (Wed, 27 Apr 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                            M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_CPULATEINIT_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+DisableCf8ExtCfg (
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Performs CPU related initialization at the late entry point
+ *
+ * This function should be the last function run by the AGESA
+ * CPU module and prepares the processor for the operating system
+ * bootstrap load process.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ * @param[in]  PlatformConfig    Contains the runtime modifiable feature input data.
+ *
+ * @retval     AGESA_SUCCESS
+ *
+ */
+AGESA_STATUS
+AmdCpuLate (
+  IN       AMD_CONFIG_PARAMS   *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig
+  )
+{
+  AP_EXE_PARAMS ApParams;
+
+  if ((PlatformConfig->PlatformProfile.AdvancedPerformanceProfile.HardwarePrefetchMode != HARDWARE_PREFETCHER_AUTO) ||
+      (PlatformConfig->PlatformProfile.AdvancedPerformanceProfile.SoftwarePrefetchMode != SOFTWARE_PREFETCHES_AUTO)) {
+    ApParams.StdHeader = *StdHeader;
+    ApParams.FunctionNumber = AP_LATE_TASK_CPU_LATE_INIT;
+    ApParams.RelatedDataBlock = (VOID *) PlatformConfig;
+    ApParams.RelatedBlockLength = sizeof (PLATFORM_CONFIGURATION);
+    RunLateApTaskOnAllAPs (&ApParams, StdHeader);
+    CpuLateInitApTask (&ApParams);
+  }
+  DisableCf8ExtCfg (StdHeader);
+  return (AGESA_SUCCESS);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  CpuLateInitApTask
+ *
+ *  Description:
+ *    This is the last function run on all APs
+ *
+ *  Parameters:
+ *    @param[in] ApExeParams   Handle to config for library and services.
+ *
+ *    @retval         AGESA_STATUS
+ *
+ *  Processing:
+ *
+ */
+AGESA_STATUS
+CpuLateInitApTask (
+  IN       AP_EXE_PARAMS *ApExeParams
+  )
+{
+  UINT64   LocalMsrRegister;
+  PLATFORM_CONFIGURATION *PlatformConfig;
+  BOOLEAN  CuCfg3Exist;
+
+  PlatformConfig = (PLATFORM_CONFIGURATION *) ApExeParams->RelatedDataBlock;
+  // The processor that has compute unit has CU_CFG3 MSR
+  switch (GetComputeUnitMapping (&(ApExeParams->StdHeader))) {
+  case AllCoresMapping:
+    CuCfg3Exist = FALSE;
+    break;
+  case EvenCoresMapping:
+    CuCfg3Exist = TRUE;
+    break;
+  default:
+    CuCfg3Exist = FALSE;
+  }
+
+  // DISABLE_HARDWARE_PREFETCH
+  if (PlatformConfig->PlatformProfile.AdvancedPerformanceProfile.HardwarePrefetchMode == DISABLE_HARDWARE_PREFETCH) {
+    // DC_CFG (MSR_C001_1022)
+    //  [13] = 1
+    //  [15] = 1
+    LibAmdMsrRead (MSR_DC_CFG, &LocalMsrRegister, &(ApExeParams->StdHeader));
+    LocalMsrRegister |= (BIT13 | BIT15);
+    LibAmdMsrWrite (MSR_DC_CFG, &LocalMsrRegister, &(ApExeParams->StdHeader));
+    // CU_CFG3 (MSR_C001_102B)
+    //  [3]  = 1
+    //  [16] = 1
+    //  [17] = 1
+    //  [18] = 1
+    if ((CuCfg3Exist) && (IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, &(ApExeParams->StdHeader)))) {
+      LibAmdMsrRead (MSR_CU_CFG3, &LocalMsrRegister, &(ApExeParams->StdHeader));
+      LocalMsrRegister |= (BIT3 | BIT16 | BIT17 | BIT18);
+      LibAmdMsrWrite (MSR_CU_CFG3, &LocalMsrRegister, &(ApExeParams->StdHeader));
+    }
+  }
+
+  // DISABLE_L1_PREFETCHER
+  if ((PlatformConfig->PlatformProfile.AdvancedPerformanceProfile.HardwarePrefetchMode == DISABLE_L1_PREFETCHER) ||
+             (PlatformConfig->PlatformProfile.AdvancedPerformanceProfile.HardwarePrefetchMode == DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES )) {
+    // CU_CFG3 (MSR_C001_102B)
+    //  [3] = 1
+    if ((CuCfg3Exist) && (IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, &(ApExeParams->StdHeader)))) {
+      LibAmdMsrRead (MSR_CU_CFG3, &LocalMsrRegister, &(ApExeParams->StdHeader));
+      LocalMsrRegister |= BIT3;
+      LibAmdMsrWrite (MSR_CU_CFG3, &LocalMsrRegister, &(ApExeParams->StdHeader));
+    }
+
+  }
+
+  // DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES
+  if ((PlatformConfig->PlatformProfile.AdvancedPerformanceProfile.HardwarePrefetchMode == DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES ) ||
+             (PlatformConfig->PlatformProfile.AdvancedPerformanceProfile.HardwarePrefetchMode == DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES )) {
+    // DC_CFG (MSR_C001_1022)
+    //  [15] = 1
+    LibAmdMsrRead (MSR_DC_CFG, &LocalMsrRegister, &(ApExeParams->StdHeader));
+    LocalMsrRegister |= BIT15;
+    LibAmdMsrWrite (MSR_DC_CFG, &LocalMsrRegister, &(ApExeParams->StdHeader));
+
+  }
+
+  // DISABLE_SOFTWARE_PREFETCHES
+  if (PlatformConfig->PlatformProfile.AdvancedPerformanceProfile.SoftwarePrefetchMode == DISABLE_SOFTWARE_PREFETCHES) {
+    // MSR_DE_CFG (MSR_C001_1029)
+    //  [7:2] = 0x3F
+    if (IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, &(ApExeParams->StdHeader))) {
+      LibAmdMsrRead (MSR_DE_CFG, &LocalMsrRegister, &(ApExeParams->StdHeader));
+      LocalMsrRegister |= 0xFC;
+      LibAmdMsrWrite (MSR_DE_CFG, &LocalMsrRegister, &(ApExeParams->StdHeader));
+    }
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Clear EnableCf8ExtCfg on all socket
+ *
+ * Clear F3x8C bit 14 EnableCf8ExtCfg
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ *
+ */
+VOID
+DisableCf8ExtCfg (
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  AGESA_STATUS  AgesaStatus;
+  PCI_ADDR PciAddress;
+  UINT32 Socket;
+  UINT32 Module;
+  UINT32 PciData;
+  UINT32 LegacyPciAccess;
+
+  ASSERT (IsBsp (StdHeader, &AgesaStatus));
+
+  for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+    for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+      if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &AgesaStatus)) {
+        PciAddress.Address.Function = FUNC_3;
+        PciAddress.Address.Register = NB_CFG_HIGH_REG;
+        LegacyPciAccess = ((1 << 31) + (PciAddress.Address.Register & 0xFC) + (PciAddress.Address.Function << 8) + (PciAddress.Address.Device << 11) + (PciAddress.Address.Bus << 16) + ((PciAddress.Address.Register & 0xF00) << (24 - 8)));
+        // read from PCI register
+        LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+        LibAmdIoRead (AccessWidth32, IOCFC, &PciData, StdHeader);
+        // Disable Cf8ExtCfg
+        PciData &= 0xFFFFBFFF;
+        // write to PCI register
+        LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+        LibAmdIoWrite (AccessWidth32, IOCFC, &PciData, StdHeader);
+      }
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Calculate an ACPI style checksum
+ *
+ * Computes the checksum and stores the value to the checksum
+ * field of the passed in ACPI table's header.
+ *
+ * @param[in]  Table             ACPI table to checksum
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+ChecksumAcpiTable (
+  IN OUT   ACPI_TABLE_HEADER *Table,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8  *BuffTempPtr;
+  UINT8  Checksum;
+  UINT32 BufferOffset;
+
+  Table->Checksum = 0;
+  Checksum = 0;
+  BuffTempPtr = (UINT8 *) Table;
+  for (BufferOffset = 0; BufferOffset < Table->TableLength; BufferOffset++) {
+    Checksum = Checksum - *(BuffTempPtr + BufferOffset);
+  }
+
+  Table->Checksum = Checksum;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Run code on every AP in the system.
+ *
+ * @param[in] ApParams       AP task pointer.
+ * @param[in] StdHeader      Handle to config for library and services
+ *
+ * @return    The most severe AGESA_STATUS returned by an AP.
+ *
+ */
+AGESA_STATUS
+RunLateApTaskOnAllAPs (
+  IN       AP_EXE_PARAMS     *ApParams,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32                  NumberOfSockets;
+  UINT32                  NumberOfCores;
+  UINT8                   Socket;
+  UINT8                   Core;
+  UINT8                   ApicId;
+  UINT32                  BscSocket;
+  UINT32                  Ignored;
+  UINT32                  BscCoreNum;
+  AGESA_STATUS            CalledStatus;
+  AGESA_STATUS            IgnoredStatus;
+  AGESA_STATUS            AgesaStatus;
+
+  ASSERT (IsBsp (StdHeader, &IgnoredStatus));
+
+  AgesaStatus = AGESA_SUCCESS;
+
+  IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredStatus);
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+      for (Core = 0; Core < NumberOfCores; Core++) {
+        if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+          GetApicId (StdHeader, Socket, Core, &ApicId, &IgnoredStatus);
+          AGESA_TESTPOINT (TpIfBeforeRunApFromAllAps, StdHeader);
+          CalledStatus = AgesaRunFcnOnAp ((UINTN) ApicId, ApParams);
+          AGESA_TESTPOINT (TpIfAfterRunApFromAllAps, StdHeader);
+          if (CalledStatus > AgesaStatus) {
+            AgesaStatus = CalledStatus;
+          }
+        }
+      }
+    }
+  }
+  return AgesaStatus;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Run code on core 0 of every socket in the system.
+ *
+ * @param[in] ApParams       AP task pointer.
+ * @param[in] StdHeader      Handle to config for library and services
+ *
+ * @return    The most severe AGESA_STATUS returned by an AP.
+ *
+ */
+AGESA_STATUS
+RunLateApTaskOnAllCore0s (
+  IN       AP_EXE_PARAMS     *ApParams,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32                  NumberOfSockets;
+  UINT8                   Socket;
+  UINT8                   ApicId;
+  UINT32                  BscSocket;
+  UINT32                  IgnoredModule;
+  UINT32                  IgnoredCore;
+  AGESA_STATUS            CalledStatus;
+  AGESA_STATUS            IgnoredStatus;
+  AGESA_STATUS            AgesaStatus;
+
+  ASSERT (IsBsp (StdHeader, &IgnoredStatus));
+
+  AgesaStatus = AGESA_SUCCESS;
+
+  IdentifyCore (StdHeader, &BscSocket, &IgnoredModule, &IgnoredCore, &IgnoredStatus);
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      if (Socket != BscSocket) {
+        GetApicId (StdHeader, Socket, 0, &ApicId, &IgnoredStatus);
+        AGESA_TESTPOINT (TpIfBeforeRunApFromAllCore0s, StdHeader);
+        CalledStatus = AgesaRunFcnOnAp ((UINTN) ApicId, ApParams);
+        AGESA_TESTPOINT (TpIfAfterRunApFromAllCore0s, StdHeader);
+        if (CalledStatus > AgesaStatus) {
+          AgesaStatus = CalledStatus;
+        }
+      }
+    }
+  }
+  return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuLateInit.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuLateInit.h
new file mode 100644
index 0000000000..050ec53b51
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuLateInit.h
@@ -0,0 +1,888 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Late Init API functions Prototypes.
+ *
+ * Contains code for doing any late CPU initialization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 60539 $   @e \$Date: 2011-10-17 17:11:05 -0600 (Mon, 17 Oct 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_LATE_INIT_H_
+#define _CPU_LATE_INIT_H_
+
+#include "Filecode.h"
+
+//  Forward declaration needed for multi-structure mutual references.
+AGESA_FORWARD_DECLARATION (PROC_FAMILY_TABLE);
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+CpuLateInitApTask (
+  IN       AP_EXE_PARAMS *ApExeParams
+  );
+
+#define AP_LATE_TASK_CPU_LATE_INIT (PROC_CPU_CPULATEINIT_FILECODE)
+#define CPU_LATE_INIT_AP_TASK {AP_LATE_TASK_CPU_LATE_INIT, (IMAGE_ENTRY) CpuLateInitApTask},
+
+//----------------------------------------------------------------------------
+//                         DMI DEFINITIONS AND MACROS
+//
+//----------------------------------------------------------------------------
+#define AP_LATE_TASK_GET_TYPE4_TYPE7 (PROC_CPU_FEATURE_CPUDMI_FILECODE)
+// SMBIOS constant definition
+#define CENTRAL_PROCESSOR       0x03
+#define EXTERNAL_CLOCK_DFLT     200
+#define EXTERNAL_CLOCK_100MHZ   100
+#define P_FAMILY_UNKNOWN        0x02
+#define P_ENGINEERING_SAMPLE    0x00
+#define P_CHARACTERISTICS       0x4
+#define CACHE_CFG_L1            0x180
+#define CACHE_CFG_L2            0x181
+#define CACHE_CFG_L3            0x182
+#define SRAM_TYPE               0x10
+#define ERR_CORRECT_TYPE        0x06
+#define CACHE_TYPE              0x05
+#define ASSOCIATIVE_2_WAY       0x04
+#define ASSOCIATIVE_4_WAY       0x05
+#define ASSOCIATIVE_8_WAY       0x07
+#define ASSOCIATIVE_16_WAY      0x08
+#define ASSOCIATIVE_32_WAY      0x0B
+#define ASSOCIATIVE_48_WAY      0x0C
+#define ASSOCIATIVE_64_WAY      0x0D
+#define ASSOCIATIVE_OTHER       0x01
+#define SOCKET_POPULATED        0x40
+#define CPU_STATUS_UNKNOWN      0x00
+#define CPU_STATUS_ENABLED      0x01
+
+// Processor Upgrade Definition
+#define P_UPGRADE_UNKNOWN       0x02
+#define P_UPGRADE_NONE          0x06
+#define P_UPGRADE_S1GX          0x16
+#define P_UPGRADE_AM2           0x17
+#define P_UPGRADE_F1207         0x18
+#define P_UPGRADE_G34           0x1A
+#define P_UPGRADE_AM3           0x1B
+#define P_UPGRADE_C32           0x1C
+#define P_UPGRADE_FS1           0x27
+#define P_UPGRADE_FM1           0x29
+
+//----------------------------------------------------------------------------
+//                         SRAT DEFINITIONS AND MACROS
+//
+//----------------------------------------------------------------------------
+#define NorthbridgeCapabilities 0xE8
+#define DRAMBase0 0x40
+#define MMIOBase0 0x80
+#define TOP_MEM 0xC001001A
+#define LOW_NODE_DEVICEID 24
+#define LOW_APICID 0
+
+
+// Miscellaneous AMD related values
+#define MAX_NUMBER_NODES  8
+
+// Flags
+#define ENABLED         1   // Bit 0
+#define DISABLED        0   // Bit 0
+#define HOTPLUGGABLE    2   // Bit 1
+
+// Affinity Entry Structures
+#define AE_APIC     0
+#define AE_MEMORY   1
+
+
+// Memory Types
+#define TYPE_MEMORY   1
+#define TYPE_RESERVED 2
+#define TYPE_ACPI     3
+#define TYPE_NVS      4
+
+//----------------------------------------------------------------------------
+//                         SLIT DEFINITIONS AND MACROS
+//
+//----------------------------------------------------------------------------
+#define PROBE_FILTER_CTRL_REG             0x1D4
+#define AMD_ACPI_SLIT_SOCKET_NUM_LENGTH   8
+
+//----------------------------------------------------------------------------
+//                         P-STATE DEFINITIONS AND MACROS
+//
+//----------------------------------------------------------------------------
+//-------------------------------------
+//          ERROR Codes
+//-------------------------------------
+#define     NO_ERROR                    0x0
+#define     USER_DISABLE_ERROR          0x01            // User disabled SSDT generation
+#define     CORES_MISSMATCH_PSS_ERROR   0x02            // No PSS match
+#define     PNOW_SUPPORT_ERROR          0x04            // One of the Cores do not support PNOW!
+#define     PWR_FREQ_MATCH_ERROR        0x08            // FREQ and PWR mismatch
+#define     NO_PSS_SIZE_ERROR           0x10            // Error in PSS Size
+#define     INVALID_PSTATE_ERROR        0x20            // Invalid Max or only 1 P-State available
+#define     NO_PSS_ENTRY                0x0FFFF
+#define     INVALID_FREQ                0x0FFFFFFFF
+
+//-------------------------
+// Default definitions
+// AMD BKDG default values
+//-------------------------
+#define DEFAULT_ISOCH_RELIEF_TIME       IRT_80uS
+#define DEFAULT_RAMP_VOLTAGE_OFFSET     RVO_50mV
+#define DEFAULT_MAX_VOLTAGE_STEP        MVS_25mV
+#define DEFAULT_PERF_PRESENT_CAP        0           // default for Desktop
+#define DEFAULT_VOLTAGE_STABLE_TIME     (100 / 20)  // 100uS
+#define DEFAULT_PLL_LOCK_TIME           2           // 2uS
+#define DEFAULT_TRANSITION_LATENCY      100         // 100uS
+#define DEFAULT_BUS_MASTER_LATENCY      9           // 9uS
+#define DEFAULT_CPU_SCOPE_NUMBER        "0UPC"
+
+// Defines for Common ACPI
+// -----------------------------
+#define     SCOPE_OPCODE            0x10
+#define     NAME_OPCODE             0x08
+#define     METHOD_OPCODE           0x14
+#define     PACKAGE_OPCODE          0x12
+#define     BUFFER_OPCODE           0x11
+#define     BYTE_PREFIX_OPCODE      0x0A
+#define     WORD_PREFIX_OPCODE      0x0B
+#define     DWORD_PREFIX_OPCODE     0x0C
+#define     RETURN_OPCODE           0xA4
+#define     ACPI_BUFFER             0x080A0B11
+
+// Generic Register Descriptor (GDR) Fields
+#define     GDR_ASI_SYSTEM_IO       0x01    // Address Space ID
+#define     GDR_ASZ_BYTE_ACCESS     0x01    // Address Size
+
+// Defines for ACPI Scope Table
+// ----------------------------
+#define     SCOPE_LENGTH    (SCOPE_STRUCT_SIZE + \
+                            PCT_STRUCT_SIZE + \
+                            PSS_HEADER_STRUCT_SIZE + \
+                            PSS_BODY_STRUCT_SIZE + \
+                            PPC_HEADER_BODY_STRUCT_SIZE)
+#define     SCOPE_VALUE1    0x5C
+#define     SCOPE_VALUE2    0x2E
+#define     SCOPE_NAME__    '_'
+#define     SCOPE_NAME_P    'P'
+#define     SCOPE_NAME_R    'R'
+#define     SCOPE_NAME_S    'S'
+#define     SCOPE_NAME_B    'B'
+#define     SCOPE_NAME_C    'C'
+#define     SCOPE_NAME_U    'U'
+#define     SCOPE_NAME_0    '0'
+#define     SCOPE_NAME_1    '1'
+#define     SCOPE_NAME_2    '2'
+#define     SCOPE_NAME_3    '3'
+#define     SCOPE_NAME_A    'A'
+
+#ifdef OEM_SCOPE_NAME
+  #if (OEM_SCOPE_NAME > 'Z') || (OEM_SCOPE_NAME < 'A')
+    #error "OEM_SCOPE_NAME: it should be only one char long AND a valid letter (A~Z)"
+  #endif
+  #define     SCOPE_NAME_VALUE    OEM_SCOPE_NAME
+#else
+  #define     SCOPE_NAME_VALUE    SCOPE_NAME_C
+#endif  // OEM_SCOPE_NAME
+
+#ifdef OEM_SCOPE_NAME1
+  #if (!(((OEM_SCOPE_NAME1 >= 'A') && (OEM_SCOPE_NAME1 <= 'Z')) || \
+         ((OEM_SCOPE_NAME1 >= '0') && (OEM_SCOPE_NAME1 <= '9')) || \
+         (OEM_SCOPE_NAME1 == '_')))
+    #error "OEM_SCOPE_NAME1: it should be only one char long AND a valid letter (0~9, A~F)"
+  #endif
+  #define     SCOPE_NAME_VALUE1   OEM_SCOPE_NAME1
+#else
+  #define     SCOPE_NAME_VALUE1   SCOPE_NAME_0
+#endif  // OEM_SCOPE_NAME
+
+// Defines for PCT Control and Status Table
+// ----------------------------------------
+#define     PCT_NAME__                  '_'
+#define     PCT_NAME_P                  'P'
+#define     PCT_NAME_C                  'C'
+#define     PCT_NAME_T                  'T'
+#define     PCT_VALUE1                  0x11022C12
+#define     PCT_VALUE2                  0x0A14
+#define     PCT_VALUE3                  0x11
+#define     GENERIC_REG_DESCRIPTION     0x82
+#define     PCT_LENGTH                  0x0C
+#define     PCT_ADDRESS_SPACE_ID        0x7F
+#define     PCT_REGISTER_BIT_WIDTH      0x40
+#define     PCT_REGISTER_BIT_OFFSET     0x00
+#define     PCT_RESERVED                0x00
+#define     PCT_CONTROL_REG_LO          0xC0010062
+#define     PCT_CONTROL_REG_HI          0x00
+#define     PCT_VALUE4                  0x14110079
+#define     PCT_VALUE5                  0x110A
+#define     PCT_STATUS_REG_LO           0x00
+#define     PCT_STATUS_REG_HI           0x00
+#define     PCT_VALUE6                  0x0079
+
+
+// Defines for PSS Header Table
+// ----------------------------
+#define     PSS_NAME__          '_'
+#define     PSS_NAME_X          'X'
+#define     PSS_NAME_P          'P'
+#define     PSS_NAME_S          'S'
+#define     PSS_LENGTH          (sizeof pssBodyStruct + 3)
+#define     NUM_OF_ITEMS_IN_PSS 0x00
+
+
+// Defines for PSS Header Table
+// ----------------------------
+#define     PSS_PKG_LENGTH              0x20  // PSS_BODY_STRUCT_SIZE - 1
+#define     PSS_NUM_OF_ELEMENTS         0x06
+#define     PSS_FREQUENCY               0x00
+#define     PSS_POWER                   0x00
+#define     PSS_TRANSITION_LATENCY      DEFAULT_TRANSITION_LATENCY
+#define     PSS_BUS_MASTER_LATENCY      DEFAULT_BUS_MASTER_LATENCY
+#define     PSS_CONTROL                 ((DEFAULT_ISOCH_RELIEF_TIME << 30) + \
+                                         (DEFAULT_RAMP_VOLTAGE_OFFSET << 28) + \
+                                         (DEFAULT_EXT_TYPE << 27) + \
+                                         (DEFAULT_PLL_LOCK_TIME << 20) + \
+                                         (DEFAULT_MAX_VOLTAGE_STEP << 18) + \
+                                         (DEFAULT_VOLTAGE_STABLE_TIME << 11) + \
+                                         (PSS_VID << 6) + PSS_FID)
+#define     PSS_STATUS                  (DEFAULT_EXTENDED_TYPE << 11) + (PSS_VID << 6) + (PSS_FID)
+
+// Defines for XPSS Header Table
+// ----------------------------
+#define     XPSS_PKG_LENGTH             0x47  // XPSS_BODY_STRUCT_SIZE - 1
+#define     XPSS_NUM_OF_ELEMENTS        0x08
+#define     XPSS_ACPI_BUFFER            0x080A0B11
+
+
+// Defines for PPC Header Table
+// ----------------------------
+#define     PPC_NAME__  '_'
+#define     PPC_NAME_P  'P'
+#define     PPC_NAME_C  'C'
+#define     PPC_NAME_V  'V'
+#define     PPC_METHOD_FLAGS  0x00;
+#define     PPC_VALUE1  0x0A;
+
+// Defines for PSD Header Table
+// ----------------------------
+#define     PSD_NAME__          '_'
+#define     PSD_NAME_P          'P'
+#define     PSD_NAME_S          'S'
+#define     PSD_NAME_D          'D'
+#define     PSD_HEADER_LENGTH   (PSD_BODY_STRUCT_SIZE + 2)
+#define     PSD_VALUE1          0x01
+
+
+// Defines for PSD Header Table
+// ----------------------------
+#define     PSD_PKG_LENGTH          (PSD_BODY_STRUCT_SIZE - 1)
+#define     NUM_OF_ENTRIES          0x05
+#define     PSD_NUM_OF_ENTRIES      0x05
+#define     PSD_REVISION            0x00
+#define     PSD_DEPENDENCY_DOMAIN   0x00
+#define     PSD_COORDINATION_TYPE_HW_ALL   0xFE
+#define     PSD_COORDINATION_TYPE_SW_ANY   0xFD
+#define     PSD_COORDINATION_TYPE_SW_ALL   0xFC
+#define     PSD_NUM_OF_PROCESSORS   0x01
+#define     PSD_CORE_NUM_PER_COMPUTE_UNIT    0x02
+#define     PSD_DOMAIN_COMPUTE_UNIT_MASK   0x7F
+
+
+#define     CUSTOM_PSTATE_FLAG      0x55
+#define     PSTATE_FLAG_1           0x55
+#define     TARGET_PSTATE_FLAG      0xAA
+#define     PSTATE_FLAG_2           0xAA
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+//----------------------------------------------------------------------------
+//                         ACPI P-States AML TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+
+//--------------------------------------------
+//              AML code definition
+//                   (Scope)
+//---------------------------------------------
+/// SCOPE
+typedef struct _SCOPE {
+  UINT8   ScopeOpcode;                  ///< Opcode
+  UINT16  ScopeLength;                  ///< Scope Length
+  UINT8   ScopeValue1;                  ///< Value1
+  UINT8   ScopeValue2;                  ///< Value2
+  UINT8   ScopeNamePt1a__;              ///< Name Pointer
+  UINT8   ScopeNamePt1a_P;              ///< Name Pointer
+  UINT8   ScopeNamePt1a_R;              ///< Name Pointer
+  UINT8   ScopeNamePt1b__;              ///< Name Pointer
+  UINT8   ScopeNamePt2a_C;              ///< Name Pointer
+  UINT8   ScopeNamePt2a_P;              ///< Name Pointer
+  UINT8   ScopeNamePt2a_U;              ///< Name Pointer
+  UINT8   ScopeNamePt2a_0;              ///< Name Pointer
+} SCOPE;
+#define     SCOPE_STRUCT_SIZE   13      // 13 Bytes
+
+//--------------------------------------------
+//              AML code definition
+//             (PCT Header and Body)
+//---------------------------------------------
+
+///Performance Control Header
+typedef struct _PCT_HEADER_BODY {
+  UINT8   NameOpcode;                   ///< Opcode
+  UINT8   PctName_a__;                  ///< String "_"
+  UINT8   PctName_a_P;                  ///< String "P"
+  UINT8   PctName_a_C;                  ///< String "C"
+  UINT8   PctName_a_T;                  ///< String "T"
+  UINT32  Value1;                       ///< Value1
+  UINT16  Value2;                       ///< Value2
+  UINT8   Value3;                       ///< Value3
+  UINT8   GenericRegDescription1;       ///< Generic Reg Description
+  UINT16  Length1;                      ///< Length1
+  UINT8   AddressSpaceId1;              ///< PCT Address Space ID
+  UINT8   RegisterBitWidth1;            ///< PCT Register Bit Width
+  UINT8   RegisterBitOffset1;           ///< PCT Register Bit Offset
+  UINT8   Reserved1;                    ///< Reserved
+  UINT32  ControlRegAddressLo;          ///< Control Register Address Low
+  UINT32  ControlRegAddressHi;          ///< Control Register Address High
+  UINT32  Value4;                       ///< Value4
+  UINT16  Value5;                       ///< Value 5
+  UINT8   GenericRegDescription2;       ///< Generic Reg Description
+  UINT16  Length2;                      ///< Length2
+  UINT8   AddressSpaceId2;              ///< PCT Address Space ID
+  UINT8   RegisterBitWidth2;            ///< PCT Register Bit Width
+  UINT8   RegisterBitOffset2;           ///< PCT Register Bit Offset
+  UINT8   Reserved2;                    ///< Reserved
+  UINT32  StatusRegAddressLo;           ///< Control Register Address Low
+  UINT32  StatusRegAddressHi;           ///< Control Register Address High
+  UINT16  Value6;                       ///< Values
+} PCT_HEADER_BODY;
+#define     PCT_STRUCT_SIZE     50      // 50 Bytes
+
+
+//--------------------------------------------
+//              AML code definition
+//                 (PSS Header)
+//--------------------------------------------
+///Performance Supported States Header
+typedef struct  _PSS_HEADER {
+  UINT8   NameOpcode;                   ///< Opcode
+  UINT8   PssName_a__;                  ///< String "_"
+  UINT8   PssName_a_P;                  ///< String "P"
+  UINT8   PssName_a_S;                  ///< String "S"
+  UINT8   PssName_b_S;                  ///< String "S"
+  UINT8   PkgOpcode;                    ///< Package Opcode
+  UINT16  PssLength;                    ///< PSS Length
+  UINT8   NumOfItemsInPss;              ///< Number of Items in PSS
+} PSS_HEADER;
+#define     PSS_HEADER_STRUCT_SIZE  9   // 9 Bytes
+
+
+//--------------------------------------------
+//              AML code definition
+//                 (PSS Body)
+//--------------------------------------------
+///Performance Supported States Body
+typedef struct _PSS_BODY {
+  UINT8   PkgOpcode;                    ///< Package Opcode
+  UINT8   PkgLength;                    ///< Package Length
+  UINT8   NumOfElements;                ///< Number of Elements
+  UINT8   DwordPrefixOpcode1;           ///< Prefix Opcode1
+  UINT32  Frequency;                    ///< Frequency
+  UINT8   DwordPrefixOpcode2;           ///< Prefix Opcode2
+  UINT32  Power;                        ///< Power
+  UINT8   DwordPrefixOpcode3;           ///< Prefix Opcode3
+  UINT32  TransitionLatency;            ///< Transition Latency
+  UINT8   DwordPrefixOpcode4;           ///< Prefix Opcode4
+  UINT32  BusMasterLatency;             ///< Bus Master Latency
+  UINT8   DwordPrefixOpcode5;           ///< Prefix Opcode5
+  UINT32  Control;                      ///< Control
+  UINT8   DwordPrefixOpcode6;           ///< Prefix Opcode6
+  UINT32  Status;                       ///< Status
+} PSS_BODY;
+#define     PSS_BODY_STRUCT_SIZE    33  // 33 Bytes
+
+
+/*--------------------------------------------
+ *              AML code definition
+ *                 (XPSS Header)
+ *--------------------------------------------
+ */
+/// Extended PSS Header
+typedef struct  _XPSS_HEADER {
+  UINT8   NameOpcode;                   ///< 08h
+  UINT8   XpssName_a_X;                 ///< String "X"
+  UINT8   XpssName_a_P;                 ///< String "P"
+  UINT8   XpssName_a_S;                 ///< String "S"
+  UINT8   XpssName_b_S;                 ///< String "S"
+  UINT8   PkgOpcode;                    ///< 12h
+  UINT16  XpssLength;                   ///< XPSS Length
+  UINT8   NumOfItemsInXpss;             ///< Number of Items in XPSS
+} XPSS_HEADER;
+#define     XPSS_HEADER_STRUCT_SIZE  9  // 9 Bytes
+
+/*--------------------------------------------
+ *              AML code definition
+ *                 (XPSS Body)
+ *--------------------------------------------
+ */
+/// Extended PSS Body
+typedef struct  _XPSS_BODY {
+  UINT8   PkgOpcode;                    ///< 12h
+  UINT8   PkgLength;                    ///< Package Length
+  UINT8   XpssValueTbd;                 ///< XPSS Value
+  UINT8   NumOfElements;                ///< Number of Elements
+  UINT8   DwordPrefixOpcode1;           ///< Prefix Opcode1
+  UINT32  Frequency;                    ///< Frequency
+  UINT8   DwordPrefixOpcode2;           ///< Prefix Opcode2
+  UINT32  Power;                        ///< Power
+  UINT8   DwordPrefixOpcode3;           ///< Prefix Opcode3
+  UINT32  TransitionLatency;            ///< Transition Latency
+  UINT8   DwordPrefixOpcode4;           ///< Prefix Opcode4
+  UINT32  BusMasterLatency;             ///< Bus Master Latency
+  UINT32  ControlBuffer;                ///< Control Buffer
+  UINT32  ControlLo;                    ///< Control Low
+  UINT32  ControlHi;                    ///< Control High
+  UINT32  StatusBuffer;                 ///< Status Buffer
+  UINT32  StatusLo;                     ///< Status Low
+  UINT32  StatusHi;                     ///< Status High
+  UINT32  ControlMaskBuffer;            ///< Control Mask Buffer
+  UINT32  ControlMaskLo;                ///< Control Mask Low
+  UINT32  ControlMaskHi;                ///< Control Mask High
+  UINT32  StatusMaskBuffer;             ///< Status Mask Buffer
+  UINT32  StatusMaskLo;                 ///< Status Mask Low
+  UINT32  StatusMaskHi;                 ///< Status Mask High
+} XPSS_BODY;
+#define     XPSS_BODY_STRUCT_SIZE    72 // 72 Bytes
+
+/*--------------------------------------------
+ *              AML code definition
+ *             (PPC Header and Body)
+ *--------------------------------------------
+ */
+/// Performance Present Capabilities Header
+typedef struct _PPC_HEADER_BODY {
+  UINT8   NameOpcode;                   ///< Name Opcode
+  UINT8   PpcName_a_P;                  ///< String "P"
+  UINT8   PpcName_b_P;                  ///< String "P"
+  UINT8   PpcName_a_C;                  ///< String "C"
+  UINT8   PpcName_a_V;                  ///< String "V"
+  UINT8   Value1;                       ///< Value
+  UINT8   DefaultPerfPresentCap;        ///< Default Perf Present Cap
+  UINT8   MethodOpcode;                 ///< Method Opcode
+  UINT8   PpcLength;                    ///< Method Length
+  UINT8   PpcName_a__;                  ///< String "_"
+  UINT8   PpcName_c_P;                  ///< String "P"
+  UINT8   PpcName_d_P;                  ///< String "P"
+  UINT8   PpcName_b_C;                  ///< String "C"
+  UINT8   MethodFlags;                  ///< Method Flags
+  UINT8   ReturnOpcode;                 ///< Return Opcoce
+  UINT8   PpcName_e_P;                  ///< String "P"
+  UINT8   PpcName_f_P;                  ///< String "P"
+  UINT8   PpcName_c_C;                  ///< String "C"
+  UINT8   PpcName_b_V;                  ///< String "V"
+
+} PPC_HEADER_BODY;
+#define     PPC_HEADER_BODY_STRUCT_SIZE     19 // 19 Bytes
+#define     PPC_METHOD_LENGTH               11 // 11 Bytes
+
+
+/*--------------------------------------------
+ *              AML code definition
+ *                (PSD Header)
+ *--------------------------------------------
+ */
+/// P-State Dependency Header
+typedef struct  _PSD_HEADER {
+  UINT8   NameOpcode;                   ///< Name Opcode
+  UINT8   PsdName_a__;                  ///< String "_"
+  UINT8   PsdName_a_P;                  ///< String "P"
+  UINT8   PsdName_a_S;                  ///< String "S"
+  UINT8   PsdName_a_D;                  ///< String "D"
+  UINT8   PkgOpcode;                    ///< Package Opcode
+  UINT8   PsdLength;                    ///< PSD Length
+  UINT8   Value1;                       ///< Value
+} PSD_HEADER;
+#define     PSD_HEADER_STRUCT_SIZE  8   // 8 Bytes
+
+/*--------------------------------------------
+ *              AML code definition
+ *                 (PSD Body)
+ *--------------------------------------------
+ */
+/// P-State Dependency Body
+typedef struct _PSD_BODY {
+  UINT8   PkgOpcode;                    ///< Package Opcode
+  UINT8   PkgLength;                    ///< Package Length
+  UINT8   NumOfEntries;                 ///< Number of Entries
+  UINT8   BytePrefixOpcode1;            ///< Prefix Opcode1 in Byte
+  UINT8   PsdNumOfEntries;              ///< PSD Number of Entries
+  UINT8   BytePrefixOpcode2;            ///< Prefix Opcode2 in Byte
+  UINT8   PsdRevision;                  ///< PSD Revision
+  UINT8   DwordPrefixOpcode1;           ///< Prefix Opcode1 in DWord
+  UINT32  DependencyDomain;             ///< Dependency Domain
+  UINT8   DwordPrefixOpcode2;           ///< Prefix Opcode2 in DWord
+  UINT32  CoordinationType;             ///< (0xFC = SW_ALL, 0xFD = SW_ANY, 0xFE = HW_ALL)
+  UINT8   DwordPrefixOpcode3;           ///< Prefix Opcode3 in DWord
+  UINT32  NumOfProcessors;              ///< Number of Processors
+} PSD_BODY;
+#define     PSD_BODY_STRUCT_SIZE    22  // 22 Bytes
+
+//----------------------------------------------------------------------------
+//                         WHEA TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+
+/// HEST MCE TABLE
+typedef struct _AMD_HEST_MCE_TABLE {
+  UINT16 TblLength;               ///< Length, in bytes, of entire AMD_HEST_MCE structure.
+  UINT32 GlobCapInitDataLSD;      ///< Holds the value that the OS will program into
+  UINT32 GlobCapInitDataMSD;      ///< the machine check global capability register(MCG_CAP).
+  UINT32 GlobCtrlInitDataLSD;     ///< Holds the value that the OS will program into
+  UINT32 GlobCtrlInitDataMSD;     ///< the machine check global control register(MCG_CTL).
+  UINT8 NumHWBanks;               ///< The number of hardware error reporting banks.
+  UINT8 Rsvd[7];                  ///< reserve 7 bytes as spec's required
+} AMD_HEST_MCE_TABLE;
+
+/// HEST CMC TABLE
+typedef struct _AMD_HEST_CMC_TABLE {
+  UINT16 TblLength;               ///< Length, in bytes, of entire AMD_HEST_CMC structure.
+  UINT8 NumHWBanks;               ///< The number of hardware error reporting banks.
+  UINT8 Rsvd[3];                  ///< reserve 3 bytes as spec's required
+} AMD_HEST_CMC_TABLE;
+
+/// HEST BANK
+typedef struct _AMD_HEST_BANK {
+  UINT8 BankNum;                  ///< Zero-based index identifies the machine check error bank.
+  UINT8 ClrStatusOnInit;          ///< Indicates if the status information in this machine check bank
+                                  ///< is to be cleared during system initialization.
+  UINT8 StatusDataFormat;         ///< Indicates the format of the data in the status register
+  UINT8 ConfWriteEn;              ///< This field indicates whether configuration parameters may be
+                                  ///< modified by the OS. If the bit for the associated parameter is
+                                  ///< set, the parameter is writable by the OS.
+  UINT32 CtrlRegMSRAddr;          ///< Address of the hardware bank's control MSR. Ignored if zero.
+
+  UINT32 CtrlInitDataLSD;         ///< This is the value the OS will program into the machine check
+  UINT32 CtrlInitDataMSD;         ///< bank's control register
+  UINT32 StatRegMSRAddr;          ///< Address of the hardware bank's MCi_STAT MSR. Ignored if zero.
+  UINT32 AddrRegMSRAddr;          ///< Address of the hardware bank's MCi_ADDR MSR. Ignored if zero.
+  UINT32 MiscRegMSRAddr;          ///< Address of the hardware bank's MCi_MISC MSR. Ignored if zero.
+} AMD_HEST_BANK;
+
+/// Initial data of AMD_HEST_BANK
+typedef struct _AMD_HEST_BANK_INIT_DATA {
+  UINT32 CtrlInitDataLSD;         ///< Initial data of CtrlInitDataLSD
+  UINT32 CtrlInitDataMSD;         ///< Initial data of CtrlInitDataMSD
+  UINT32 CtrlRegMSRAddr;          ///< Initial data of CtrlRegMSRAddr
+  UINT32 StatRegMSRAddr;          ///< Initial data of StatRegMSRAddr
+  UINT32 AddrRegMSRAddr;          ///< Initial data of AddrRegMSRAddr
+  UINT32 MiscRegMSRAddr;          ///< Initial data of MiscRegMSRAddr
+} AMD_HEST_BANK_INIT_DATA;
+
+/// MSR179 Global Machine Check Capabilities data struct
+typedef struct _MSR_MCG_CAP_STRUCT {
+  UINT64 Count:8;                 ///< Indicates the number of
+                                  ///< error-reporting banks visible to each core
+  UINT64 McgCtlP:1;               ///< 1=The machine check control registers
+  UINT64 Rsvd:55;                 ///< reserved
+} MSR_MCG_CAP_STRUCT;
+
+/// Initial data of WHEA
+typedef struct _AMD_WHEA_INIT_DATA {
+  UINT32 GlobCapInitDataLSD;      ///< Holds the value that the OS will program into the machine
+  UINT32 GlobCapInitDataMSD;      ///< Check global capability register
+  UINT32 GlobCtrlInitDataLSD;     ///< Holds the value that the OS will grogram into the machine
+  UINT32 GlobCtrlInitDataMSD;     ///< Check global control register
+  UINT8  ClrStatusOnInit;         ///< Indicates if the status information in this machine check
+                                  ///< bank is to be cleared during system initialization
+  UINT8  StatusDataFormat;        ///< Indicates the format of the data in the status register
+  UINT8  ConfWriteEn;             ///< This field indicates whether configuration parameters may be
+                                  ///< modified by the OS. If the bit for the associated parameter is
+                                  ///< set, the parameter is writable by the OS.
+  UINT8  HestBankNum;             ///< Number of HEST Bank
+  AMD_HEST_BANK_INIT_DATA *HestBankInitData;  ///< Pointer to Initial data of HEST Bank
+} AMD_WHEA_INIT_DATA;
+
+//----------------------------------------------------------------------------
+//                         DMI TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// DMI brand information
+typedef struct {
+  UINT16 String1:4;                 ///< String1
+  UINT16 String2:4;                 ///< String2
+  UINT16 Model:7;                   ///< Model
+  UINT16 Pg:1;                      ///< Page
+} BRAND_ID;
+
+/// DMI processor information
+typedef struct {
+  UINT8  ExtendedFamily;            ///< Extended Family
+  UINT8  ExtendedModel;             ///< Extended Model
+  UINT8  BaseFamily;                ///< Base Family
+  UINT8  BaseModel;                 ///< Base Model
+  UINT8  Stepping;                  ///< Stepping
+  UINT8  PackageType;               ///< PackageType
+  BRAND_ID BrandId;                 ///< BrandId which contains information about String1, String2, Model and Page
+  UINT8  TotalCoreNumber;           ///< Number of total cores
+  UINT8  EnabledCoreNumber;         ///< Number of enabled cores
+  UINT8  ProcUpgrade;               ///< ProcUpdrade
+  UINT32 L1CacheSize;               ///< L1 cache size
+  UINT32 L2CacheSize;               ///< L2 cache size
+} CPU_TYPE_INFO;
+
+/// A structure containing processor name string and
+/// the value that should be provide to DMI type 4 processor family
+typedef struct {
+  IN       CONST CHAR8 *Stringstart;  ///< The literal string
+  IN       UINT8  T4ProcFamilySetting; ///< The value set to DMI type 4 processor family
+} CPU_T4_PROC_FAMILY;
+
+/// DMI ECC information
+typedef struct {
+  BOOLEAN EccCapable;               ///< ECC Capable
+  UINT8  PartitionRowPosition;      ///< DMI Type 20 offset 10h: Partition Row Position
+                                    ///<                         2 - single channel memory
+                                    ///<                         0 - dual channel memory
+} CPU_GET_MEM_INFO;
+
+/*  Transfer vectors for DMI family specific routines   */
+typedef VOID  OPTION_DMI_GET_CPU_INFO (
+  IN OUT   CPU_TYPE_INFO *CpuInfoPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+typedef VOID  OPTION_DMI_GET_PROC_FAMILY (
+  IN OUT   UINT8 *T4ProcFamily,
+  IN       PROC_FAMILY_TABLE *CpuDmiProcFamilyTable,
+  IN       CPU_TYPE_INFO *CpuInfo,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+typedef UINT8 OPTION_DMI_GET_VOLTAGE (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+typedef UINT16  OPTION_DMI_GET_MAX_SPEED (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+typedef UINT16  OPTION_DMI_GET_EXT_CLOCK (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+typedef VOID  OPTION_DMI_GET_MEM_INFO (
+  IN OUT   CPU_GET_MEM_INFO  *CpuGetMemInfoPtr,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+/// Brand table entry format
+typedef struct {
+  UINT8 PackageType;                ///< Package type
+  UINT8 PgOfBrandId;                ///< Page
+  UINT8 NumberOfCores;              ///< Number of cores
+  UINT8 String1ofBrandId;           ///< String1
+  UINT8 ValueSetToDmiTable;         ///< The value which will should be set to DMI table
+} DMI_BRAND_ENTRY;
+
+/// Family specific data table structure
+struct _PROC_FAMILY_TABLE {
+  UINT64                    ProcessorFamily;  ///< processor
+  OPTION_DMI_GET_CPU_INFO   *DmiGetCpuInfo;   ///< transfer vectors
+  OPTION_DMI_GET_PROC_FAMILY  *DmiGetT4ProcFamily;  ///< Get DMI type 4 processor family information
+  OPTION_DMI_GET_VOLTAGE    *DmiGetVoltage;   ///< vector for reading voltage
+  OPTION_DMI_GET_MAX_SPEED  *DmiGetMaxSpeed;  ///< vector for reading speed
+  OPTION_DMI_GET_EXT_CLOCK  *DmiGetExtClock;  ///< vector for reading external clock speed
+  OPTION_DMI_GET_MEM_INFO   *DmiGetMemInfo;   ///< Get memory information
+  UINT8                     LenBrandList;     ///< size of brand table
+  CONST DMI_BRAND_ENTRY     *DmiBrandList;    ///< translate brand info to DMI identifier
+};
+
+//----------------------------------------------------------------------------
+//                         SLIT TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// Format for SRAT Header
+typedef struct {
+  UINT8   Sign[4];                      ///< Signature
+  UINT32  TableLength;                  ///< Table Length
+  UINT8   Revision;                     ///< Revision
+  UINT8   Checksum;                     ///< Checksum
+  UINT8   OemId[6];                     ///< OEM ID
+  UINT8   OemTableId[8];                ///< OEM Tabled ID
+  UINT32  OemRev;                       ///< OEM Revision
+  UINT8   CreatorId[4];                 ///< Creator ID
+  UINT32  CreatorRev;                   ///< Creator Revision
+} ACPI_TABLE_HEADER;
+
+//----------------------------------------------------------------------------
+//                         SRAT TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// Format for SRAT Header
+typedef struct _CPU_SRAT_HEADER {
+  UINT8   Sign[4];                      ///< Signature
+  UINT32  TableLength;                  ///< Table Length
+  UINT8   Revision;                     ///< Revision
+  UINT8   Checksum;                     ///< Checksum
+  UINT8   OemId[6];                     ///< OEM ID
+  UINT8   OemTableId[8];                ///< OEM Tabled ID
+  UINT32  OemRev;                       ///< OEM Revision
+  UINT8   CreatorId[4];                 ///< Creator ID
+  UINT32  CreatorRev;                   ///< Creator Revision
+  UINT32  TableRev;                     ///< Table Revision
+  UINT8   Reserved[8];                  ///< Reserved
+} CPU_SRAT_HEADER;
+
+
+/// Format for SRAT APIC Affinity Entry
+typedef struct _CPU_SRAT_APIC_ENTRY {
+  UINT8   Type;                         ///< Type
+  UINT8   Length;                       ///< Length
+  UINT8   Domain;                       ///< Domain
+  UINT8   ApicId;                       ///< Apic ID
+  UINT32  Flags;                        ///< Flags
+  UINT8   LSApicEid;                    ///< Local SAPIC EID
+  UINT8   Reserved[7];                  ///< Reserved
+} CPU_SRAT_APIC_ENTRY;
+
+
+/// Format for SRAT Memory Affinity Entry
+typedef struct _CPU_SRAT_MEMORY_ENTRY {
+  UINT8   Type;                         ///< 0: Memory affinity = 1
+  UINT8   Length;                       ///< 1: Length = 40 bytes
+  UINT32  Domain;                       ///< 2: Proximity domain
+  UINT8   Reserved1[2];                 ///< 6: Reserved
+  UINT32  BaseAddrLow;                  ///< 8:  Low 32bits address base
+  UINT32  BaseAddrHigh;                 ///< 12: High 32bits address base
+  UINT32  LengthAddrLow;                ///< 16: Low 32bits address limit
+  UINT32  LengthAddrHigh;               ///< 20: High 32bits address limit
+  UINT8   Reserved2[4];                 ///< 24: Memory Type
+  UINT32  Flags;                        ///< 28: Flags
+  UINT8   Reserved3[8];                 ///< 32: Reserved
+} CPU_SRAT_MEMORY_ENTRY;
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+AmdCpuLate (
+  IN       AMD_CONFIG_PARAMS   *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig
+  );
+
+AGESA_STATUS
+CreateAcpiWhea (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader,
+  IN OUT   VOID                 **WheaMcePtr,
+  IN OUT   VOID                 **WheaCmcPtr
+  );
+
+AGESA_STATUS
+CreateDmiRecords (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader,
+  IN OUT   DMI_INFO             **DmiTable
+  );
+
+AGESA_STATUS
+GetType4Type7Info (
+  IN       AP_EXE_PARAMS *ApExeParams
+  );
+
+VOID
+DmiGetT4ProcFamilyFromBrandId (
+  IN OUT   UINT8 *T4ProcFamily,
+  IN       PROC_FAMILY_TABLE *CpuDmiProcFamilyTable,
+  IN       CPU_TYPE_INFO *CpuInfo,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+GetNameString (
+  IN OUT   CHAR8 *String,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+IsSourceStrContainTargetStr (
+  IN OUT   CHAR8 *SourceStr,
+  IN OUT   CONST CHAR8 *TargetStr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+CreateAcpiSrat (
+  IN OUT   AMD_CONFIG_PARAMS    *StdHeader,
+  IN OUT   VOID                 **SratPtr
+  );
+
+AGESA_STATUS
+CreateAcpiSlit (
+  IN OUT   AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN OUT   VOID                   **SlitPtr
+  );
+
+VOID
+ChecksumAcpiTable (
+  IN OUT   ACPI_TABLE_HEADER *Table,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+RunLateApTaskOnAllAPs (
+  IN       AP_EXE_PARAMS     *ApParams,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+RunLateApTaskOnAllCore0s (
+  IN       AP_EXE_PARAMS     *ApParams,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+#endif // _CPU_LATE_INIT_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuMicrocodePatch.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuMicrocodePatch.c
new file mode 100644
index 0000000000..69d198b43c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuMicrocodePatch.c
@@ -0,0 +1,420 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Microcode Patch Related Functions
+ *
+ * Contains code to program a microcode into the CPU
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56322 $   @e \$Date: 2011-07-11 16:51:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                            M O D U L E S    U S E D
+ *---------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuEarlyInit.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_CPUMICROCODEPATCH_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+typedef union {
+  UINT64           RawData;
+  PATCH_LOADER_MSR BitFields;
+} PATCH_LOADER;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+BOOLEAN
+LoadMicrocode (
+  IN       MICROCODE_PATCH    *MicrocodePatchPtr,
+  IN OUT   AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+VOID
+LoadMicrocodePatchAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *  Update microcode patch in current processor.
+ *
+ *  Then reads the patch id, and compare it to the expected, in the Microprocessor
+ *  patch block.
+ *
+ *  @param[in] StdHeader   - Config handle for library and services.
+ *
+ *  @retval    TRUE   - Patch Loaded Successfully.
+ *  @retval    FALSE  - Patch Did Not Get Loaded.
+ *
+ */
+BOOLEAN
+LoadMicrocodePatch (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8    PatchNumber;
+  UINT8    TotalPatches;
+  UINT16   ProcessorEquivalentId;
+  BOOLEAN  Status;
+  MICROCODE_PATCH **MicrocodePatchPtr;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  Status = FALSE;
+
+  if (IsCorePairPrimary (FirstCoreIsComputeUnitPrimary, StdHeader)) {
+    // Get the patch pointer
+    GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+    FamilySpecificServices->GetMicroCodePatchesStruct (FamilySpecificServices, (const VOID **) &MicrocodePatchPtr, &TotalPatches, StdHeader);
+
+    IDS_OPTION_HOOK (IDS_UCODE, &TotalPatches, StdHeader);
+
+    // Get the processor microcode path equivalent ID
+    if (GetPatchEquivalentId (&ProcessorEquivalentId, StdHeader)) {
+      // parse the patch table to see if we have one for the current cpu
+      for (PatchNumber = 0; PatchNumber < TotalPatches; PatchNumber++) {
+        if (ValidateMicrocode (MicrocodePatchPtr[PatchNumber], ProcessorEquivalentId, StdHeader)) {
+          if (LoadMicrocode (MicrocodePatchPtr[PatchNumber], StdHeader)) {
+            Status = TRUE;
+          } else {
+            PutEventLog (AGESA_ERROR,
+                         CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED,
+                         0, 0, 0, 0, StdHeader);
+          }
+          break; // Once we find a microcode patch that matches the processor, exit the for loop
+        }
+      }
+    }
+  }
+  return Status;
+}
+
+/*---------------------------------------------------------------------------------------
+ *                           L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  LoadMicrocode
+ *
+ *    Update microcode patch in current processor, then reads the
+ *    patch id, and compare it to the expected, in the Microprocessor
+ *    patch block.
+ *
+ *    @param[in]       MicrocodePatchPtr  - Pointer to Microcode Patch.
+ *    @param[in,out]   StdHeader          - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ *    @retval          TRUE  - Patch Loaded Successfully.
+ *    @retval          FALSE - Patch Did Not Get Loaded.
+ *
+ */
+BOOLEAN
+LoadMicrocode (
+  IN       MICROCODE_PATCH    *MicrocodePatchPtr,
+  IN OUT   AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT32       MicrocodeVersion;
+  PATCH_LOADER PatchLoaderMsr;
+
+  // Load microcode patch into CPU
+  PatchLoaderMsr.RawData = (UINT64) MicrocodePatchPtr;
+  PatchLoaderMsr.BitFields.SBZ = 0;
+  LibAmdMsrWrite (MSR_PATCH_LOADER, &PatchLoaderMsr.RawData, StdHeader);
+
+  // Do ucode patch Authentication
+  // Read microcode version back from CPU, determine if
+  // it is the same patch level as contained in the source
+  // microprocessor patch block passed in
+  GetMicrocodeVersion (&MicrocodeVersion, StdHeader);
+  if (MicrocodeVersion == MicrocodePatchPtr->PatchID) {
+    return (TRUE);
+  } else {
+    return (FALSE);
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  GetPatchEquivalentId
+ *
+ *    Return the equivalent ID for microcode patching
+ *
+ *    @param[in,out]   ProcessorEquivalentId   - Pointer to Processor Equivalent ID table.
+ *    @param[in,out]   StdHeader               - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ *    @retval          TRUE  - ID Found.
+ *    @retval          FALSE - ID Not Found.
+ *
+ */
+BOOLEAN
+GetPatchEquivalentId (
+  IN OUT   UINT16             *ProcessorEquivalentId,
+  IN OUT   AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT8        i;
+  UINT8        EquivalencyEntries;
+  UINT16       ProcessorRevisionId;
+  UINT16       *MicrocodeEquivalenceTable;
+  CPUID_DATA   CpuIdData;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  //
+  // compute the processor revision ID
+  //
+  LibAmdCpuidRead (AMD_CPUID_FMF, &CpuIdData, StdHeader);
+  // high byte contains extended model and extended family
+  ProcessorRevisionId  = (UINT16) ((CpuIdData.EAX_Reg & (CPU_EMODEL | CPU_EFAMILY)) >> 8);
+  // low byte contains model and family
+  ProcessorRevisionId |= (CpuIdData.EAX_Reg & (CPU_STEPPING | CPU_MODEL));
+
+  //
+  // find the equivalent ID for microcode purpose using the equivalence table
+  //
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+  FamilySpecificServices->GetMicrocodeEquivalenceTable (FamilySpecificServices,
+                                                        (CONST VOID **) &MicrocodeEquivalenceTable,
+                                                        &EquivalencyEntries,
+                                                        StdHeader);
+
+  // parse the equivalence table
+  for (i = 0; i < (EquivalencyEntries * 2); i += 2) {
+    // check for equivalence
+    if (ProcessorRevisionId == MicrocodeEquivalenceTable[i]) {
+      *ProcessorEquivalentId = MicrocodeEquivalenceTable[i + 1];
+      return (TRUE);
+    }
+  }
+  // end of table reach, this processor is not supported
+  *ProcessorEquivalentId = 0x0000;
+  return (FALSE);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  ValidateMicrocode
+ *
+ *    Determine if the microcode patch block, currently pointed to
+ *    is valid, and is appropriate for the current processor
+
+ *    @param[in]       MicrocodePatchPtr      - Pointer to Microcode Patch.
+ *    @param[in]       ProcessorEquivalentId  - Pointer to Processor Equivalent ID table.
+ *    @param[in,out]   StdHeader              - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ *    @retval          TRUE  - Patch Found.
+ *    @retval          FALSE - Patch Not Found.
+ *
+ */
+BOOLEAN
+ValidateMicrocode (
+  IN       MICROCODE_PATCH    *MicrocodePatchPtr,
+  IN       UINT16             ProcessorEquivalentId,
+  IN OUT   AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  BOOLEAN   Chipset1Matched;
+  BOOLEAN   Chipset2Matched;
+  PCI_ADDR  PciAddress;
+  UINT32    PciDeviceVidDid;
+  UINT8     PciDeviceRevision;
+  UINT8     DevCount;
+  UINT8     FunCount;
+  UINT32    Chipset1DeviceID;
+  UINT32    Chipset2DeviceID;
+  UINT8     MulitFunction;
+
+  Chipset1Matched = FALSE;
+  Chipset2Matched = FALSE;
+  PciDeviceVidDid = 0;
+  PciDeviceRevision = 0;
+  Chipset1DeviceID = MicrocodePatchPtr->Chipset1DeviceID;
+  Chipset2DeviceID = MicrocodePatchPtr->Chipset2DeviceID;
+  MulitFunction = 0;
+
+  //
+  // parse the supplied microcode to see if it is compatible with the processor
+  //
+  if (MicrocodePatchPtr->ProcessorRevisionID !=  ProcessorEquivalentId) {
+    return (FALSE);
+  }
+
+  if (Chipset1DeviceID == 0) {
+    Chipset1Matched = TRUE;
+  }
+  if (Chipset2DeviceID == 0) {
+    Chipset2Matched = TRUE;
+  }
+
+  if ((!Chipset1Matched) || (!Chipset2Matched)) {
+    //
+    // Scan all PCI devices in Bus 0, try to find out matched case.
+    //
+    for (DevCount = 0; DevCount < 32; DevCount++) {
+      for (FunCount = 0; FunCount < 8; FunCount++) {
+        PciAddress.AddressValue = MAKE_SBDFO (0, 0, DevCount, FunCount, 0);
+        LibAmdPciRead (AccessWidth32, PciAddress, &PciDeviceVidDid, StdHeader);
+        if (PciDeviceVidDid == 0xFFFFFFFF) {
+          if (FunCount == 0) {
+            break;
+          } else {
+            continue;
+          }
+        }
+        PciAddress.Address.Register = 0x8;
+        LibAmdPciRead (AccessWidth8, PciAddress, &PciDeviceRevision, StdHeader);
+        if ((!Chipset1Matched) && (PciDeviceVidDid == Chipset1DeviceID)) {
+          if (PciDeviceRevision == MicrocodePatchPtr->Chipset1RevisionID) {
+            Chipset1Matched = TRUE;
+          }
+        }
+        if ((!Chipset2Matched) && (PciDeviceVidDid == Chipset2DeviceID)) {
+          if (PciDeviceRevision == MicrocodePatchPtr->Chipset2RevisionID) {
+            Chipset2Matched = TRUE;
+          }
+        }
+        if (Chipset1Matched && Chipset2Matched) {
+          break;
+        }
+        //
+        // Check multi-function. If it doesen't exist, we don't have to loop functions to 7.
+        //
+        if (FunCount == 0) {
+          MulitFunction = 0;
+          PciAddress.Address.Register = 0xE;
+          LibAmdPciRead (AccessWidth8, PciAddress, &MulitFunction, StdHeader);
+          if ((MulitFunction & 0x80) == 0) {
+            break;
+          }
+        }
+      } // end FunCount for loop.
+
+      if (Chipset1Matched && Chipset2Matched) {
+        break;
+      }
+    }  // end DevCount for loop.
+  }
+
+  return (Chipset1Matched && Chipset2Matched);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  GetMicrocodeVersion
+ *
+ *    Return the version of the currently loaded microcode patch, if any.
+ *    Read from the patch level MSR, return the value in eax. If no patch
+ *    has been loaded, 0 will be returned.
+ *
+ *    @param[out]      pMicrocodeVersion  - Pointer to Microcode Version.
+ *    @param[in,out]   StdHeader          - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+GetMicrocodeVersion (
+     OUT   UINT32             *pMicrocodeVersion,
+  IN OUT   AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  UINT64  MsrData;
+
+  MsrData = 0;
+  LibAmdMsrRead (MSR_PATCH_LEVEL, &MsrData, StdHeader);
+
+  *pMicrocodeVersion = (UINT32) MsrData;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Update microcode patch in current processor.
+ *
+ * This function acts as a wrapper for calling the LoadMicrocodePatch
+ * routine at AmdInitEarly.
+ *
+ *  @param[in]   FamilyServices      The current Family Specific Services.
+ *  @param[in]   EarlyParams         Service parameters.
+ *  @param[in]   StdHeader           Config handle for library and services.
+ *
+ */
+VOID
+LoadMicrocodePatchAtEarly (
+  IN       CPU_SPECIFIC_SERVICES  *FamilyServices,
+  IN       AMD_CPU_EARLY_PARAMS   *EarlyParams,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  AGESA_TESTPOINT (TpProcCpuLoadUcode, StdHeader);
+  LoadMicrocodePatch (StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPage.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPage.h
new file mode 100644
index 0000000000..9a70027b4b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPage.h
@@ -0,0 +1,62 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Create outline and references for CPU Component mainpage documentation.
+ *
+ * Design guides, maintenance guides, and general documentation, are
+ * collected using this file onto the documentation mainpage.
+ * This file contains doxygen comment blocks, only.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Documentation
+ * @e \$Revision: 52914 $   @e \$Date: 2011-05-12 17:50:49 -0600 (Thu, 12 May 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/**
+ * @page cpumain CPU Component Documentation
+ *
+ * Additional documentation for the CPU component consists of
+ *
+ * - Maintenance Guides:
+ *   - @subpage cpuimplfss "CPU Family Specific Services Implementation Guide"
+ *   - @subpage regtableimpl  "Register Table Implementation Guide"
+ *   - @subpage cpufeatimpl  "CPU Generic Feature Implementation Guide"
+ *   - @subpage ucodeflag "Microcode Patches Signature Guide"
+ *   - add here >>>
+ * - Design Guides:
+ *   - add here >>>
+ *
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPostInit.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPostInit.c
new file mode 100644
index 0000000000..901eb80e5a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPostInit.c
@@ -0,0 +1,493 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU POST API, and related functions.
+ *
+ * Contains code that initialized the CPU after memory init.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ****************************************************************************
+ * AMD Generic Encapsulated Software Architecture
+ *
+ * Description: cpuPostInit.c - Cpu POST Initialization Functions.
+ *
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Options.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "heapManager.h"
+#include "cpuServices.h"
+#include "cpuFeatures.h"
+#include "GeneralServices.h"
+#include "cpuPostInit.h"
+#include "cpuPstateTables.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_CPUPOSTINIT_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+SyncVariableMTRR (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+extern CPU_FAMILY_SUPPORT_TABLE            PstateFamilyServiceTable;
+
+extern
+VOID
+ExecuteWbinvdInstruction (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+PstateCreateHeapInfo (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Performs CPU related initialization at the POST entry point
+ *
+ * This function performs a large list of initialization items.  These items
+ * include:
+ *
+ *    -1      AP MTRR sync
+ *    -2      feature leveling
+ *    -3      P-state data gather
+ *    -4      P-state leveling
+ *    -5      AP cache breakdown & release
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ * @param[in]  PlatformConfig    Config handle for platform specific information
+ *
+ * @retval     AGESA_SUCCESS
+ *
+ */
+AGESA_STATUS
+AmdCpuPost (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig
+  )
+{
+  AGESA_STATUS AgesaStatus;
+  AGESA_STATUS CalledStatus;
+
+  AgesaStatus = AGESA_SUCCESS;
+  //
+  // Sync variable MTRR
+  //
+  AGESA_TESTPOINT (TpProcCpuApMtrrSync, StdHeader);
+  SyncVariableMTRR (StdHeader);
+
+  AGESA_TESTPOINT (TpProcCpuPostFeatureInit, StdHeader);
+  IDS_HDT_CONSOLE (CPU_TRACE, "  Dispatch CPU features after AP MTRR sync\n");
+  CalledStatus = DispatchCpuFeatures (CPU_FEAT_AFTER_POST_MTRR_SYNC, PlatformConfig, StdHeader);
+  if (CalledStatus > AgesaStatus) {
+    AgesaStatus = CalledStatus;
+  }
+  //
+  // Feature Leveling
+  //
+  AGESA_TESTPOINT (TpProcCpuFeatureLeveling, StdHeader);
+  IDS_HDT_CONSOLE (CPU_TRACE, "  Perform feature leveling\n");
+  FeatureLeveling (StdHeader);
+  //
+  // P-state Gathered and set heap info
+  //
+  IDS_HDT_CONSOLE (CPU_TRACE, "  Create P-state info in the heap\n");
+  PstateCreateHeapInfo (PlatformConfig, StdHeader);
+
+  // Set TscFreqSel at the rate specified by the core P0 after core frequency leveling.
+  SetCoresTscFreqSel (StdHeader);
+
+  // Dispatch CPU features before relinquishing control of APs
+  AGESA_TESTPOINT (TpProcCpuBeforeRelinquishAPsFeatureInit, StdHeader);
+  IDS_HDT_CONSOLE (CPU_TRACE, "  Dispatch CPU features before Relinquishing control of APs\n");
+  CalledStatus = DispatchCpuFeatures (CPU_FEAT_BEFORE_RELINQUISH_AP, PlatformConfig, StdHeader);
+  if (CalledStatus > AgesaStatus) {
+    AgesaStatus = CalledStatus;
+  }
+
+  // Relinquish control of all APs to IBV.
+  IDS_HDT_CONSOLE (CPU_TRACE, "  Relinquish control of APs\n");
+  RelinquishControlOfAllAPs (StdHeader);
+
+  return (AgesaStatus);
+}
+
+/*---------------------------------------------------------------------------------------
+ *                           L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determines the address in system DRAM that should be used for p-state data
+ * gather and leveling.
+ *
+ * @param[out] Ptr               Address to utilize
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ * @retval     AGESA_SUCCESS
+ *
+ */
+AGESA_STATUS
+GetPstateGatherDataAddressAtPost (
+     OUT   UINT64            **Ptr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 AddressValue;
+
+  AddressValue = P_STATE_DATA_GATHER_TEMP_ADDR;
+
+  *Ptr = (UINT64 *)(AddressValue);
+
+  return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * AP task to sync memory subsystem MSRs with the BSC
+ *
+ * This function processes a list of MSRs and the BSC's current values for those
+ * MSRs.  This will allow the APs to see system RAM.
+ *
+ * @param[in]  MtrrTable         Memory related MSR table
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+SyncAllApMtrrToBsc (
+  IN       VOID *MtrrTable,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8   i;
+
+  for (i = 0; ((BSC_AP_MSR_SYNC *) MtrrTable)[i].RegisterAddress != 0; i++) {
+    LibAmdMsrWrite (((BSC_AP_MSR_SYNC *) MtrrTable)[i].RegisterAddress,
+                    &((BSC_AP_MSR_SYNC *) MtrrTable)[i].RegisterValue,
+                    StdHeader);
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Creates p-state information on the heap
+ *
+ * This function gathers p-state information from all processors in the system,
+ * determines a level set of p-states, and places that information into the
+ * heap.  This heap data will be used by GenerateSsdt to generate the
+ * final _PSS and XPSS objects.
+ *
+ * @param[in]  PlatformConfig    Pointer to runtime configuration options
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ * @retval     AGESA_SUCCESS     No error
+ * @retval     AGESA_ERROR       CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE
+ */
+AGESA_STATUS
+PstateCreateHeapInfo (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  AGESA_STATUS            AgesaStatus;
+  S_CPU_AMD_PSTATE        *PStateBufferPtr;
+  ALLOCATE_HEAP_PARAMS    AllocHeapParams;
+  UINT8                   *PStateBufferPtrInHeap;
+
+  ASSERT (IsBsp (StdHeader, &AgesaStatus));
+
+  //
+  //Get proper address for gather data pool address
+  //Zero P-state gather data pool
+  //
+  GetPstateGatherDataAddressAtPost ((UINT64 **)&PStateBufferPtr, StdHeader);
+  LibAmdMemFill (PStateBufferPtr, 0, sizeof (S_CPU_AMD_PSTATE), StdHeader);
+
+  //
+  //Get all the CPUs P-States and fill the PStateBufferPtr for each core
+  //
+  AgesaStatus = PStateGatherData (PlatformConfig, PStateBufferPtr, StdHeader);
+  if (AgesaStatus != AGESA_SUCCESS) {
+    return AgesaStatus;
+  }
+
+  //
+  //Do Pstate Leveling for each core if needed.
+  //
+  AgesaStatus = PStateLeveling (PStateBufferPtr, StdHeader);
+
+  //
+  //Create Heap and store p-state data for ACPI table in CpuLate
+  //
+  AllocHeapParams.RequestedBufferSize = PStateBufferPtr->SizeOfBytes;
+  AllocHeapParams.BufferHandle = AMD_PSTATE_DATA_BUFFER_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  AgesaStatus = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
+  if (AgesaStatus == AGESA_SUCCESS) {
+    //
+    // Zero Buffer
+    //
+    PStateBufferPtrInHeap = (UINT8 *) AllocHeapParams.BufferPtr;
+    LibAmdMemFill (PStateBufferPtrInHeap, 0, PStateBufferPtr->SizeOfBytes, StdHeader);
+    LibAmdMemCopy  (PStateBufferPtrInHeap, PStateBufferPtr, PStateBufferPtr->SizeOfBytes, StdHeader);
+
+  } else {
+    PutEventLog (AGESA_ERROR,
+                   CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE,
+                 0, 0, 0, 0, StdHeader);
+  }
+
+  return AgesaStatus;
+}
+
+VOID
+SyncApMsrsToBsc (
+  IN OUT   BSC_AP_MSR_SYNC    *ApMsrSync,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  AP_TASK                 TaskPtr;
+  UINT16                  i;
+  UINT32                  BscSocket;
+  UINT32                  Ignored;
+  UINT32                  BscCoreNum;
+  UINT32                  Core;
+  UINT32                  Socket;
+  UINT32                  NumberOfSockets;
+  UINT32                  NumberOfCores;
+  AGESA_STATUS            IgnoredSts;
+
+  ASSERT (IsBsp (StdHeader, &IgnoredSts));
+
+  IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  //
+  //Sync all MTRR settings with BSP
+  //
+  for (i = 0; ApMsrSync[i].RegisterAddress != 0; i++) {
+    LibAmdMsrRead (ApMsrSync[i].RegisterAddress, &ApMsrSync[i].RegisterValue, StdHeader);
+  }
+
+  TaskPtr.FuncAddress.PfApTaskI = SyncAllApMtrrToBsc;
+  TaskPtr.DataTransfer.DataSizeInDwords = (UINT16) ((((sizeof (BSC_AP_MSR_SYNC)) * i) + 4) >> 2);
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+  TaskPtr.DataTransfer.DataPtr = ApMsrSync;
+  TaskPtr.DataTransfer.DataTransferFlags = 0;
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+      for (Core = 0; Core < NumberOfCores; Core++) {
+        if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+          ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+        }
+      }
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * SyncVariableMTRR
+ *
+ * Sync variable MTRR
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+STATIC
+SyncVariableMTRR (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  )
+{
+  BSC_AP_MSR_SYNC ApMsrSync[20];
+
+  ApMsrSync[0].RegisterAddress = SYS_CFG;
+  ApMsrSync[1].RegisterAddress = TOP_MEM;
+  ApMsrSync[2].RegisterAddress = TOP_MEM2;
+  ApMsrSync[3].RegisterAddress = 0x200;
+  ApMsrSync[4].RegisterAddress = 0x201;
+  ApMsrSync[5].RegisterAddress = 0x202;
+  ApMsrSync[6].RegisterAddress = 0x203;
+  ApMsrSync[7].RegisterAddress = 0x204;
+  ApMsrSync[8].RegisterAddress = 0x205;
+  ApMsrSync[9].RegisterAddress = 0x206;
+  ApMsrSync[10].RegisterAddress = 0x207;
+  ApMsrSync[11].RegisterAddress = 0x208;
+  ApMsrSync[12].RegisterAddress = 0x209;
+  ApMsrSync[13].RegisterAddress = 0x20A;
+  ApMsrSync[14].RegisterAddress = 0x20B;
+  ApMsrSync[15].RegisterAddress = 0xC0010016;
+  ApMsrSync[16].RegisterAddress = 0xC0010017;
+  ApMsrSync[17].RegisterAddress = 0xC0010018;
+  ApMsrSync[18].RegisterAddress = 0xC0010019;
+  ApMsrSync[19].RegisterAddress = 0;
+  SyncApMsrsToBsc (ApMsrSync, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * The function suppose to do any thing need to be done at the end of AmdInitPost.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ * @retval     AGESA_SUCCESS
+ *
+ */
+AGESA_STATUS
+FinalizeAtPost (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  //
+  // Execute wbinvd to ensure heap data in cache write back to memory.
+  //
+  ExecuteWbinvdInstruction (StdHeader);
+
+  return AGESA_SUCCESS;
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set TSC Frequency Selection.
+ *
+ * This function set TSC Frequency Selection.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+STATIC
+SetTscFreqSel (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  PSTATE_CPU_FAMILY_SERVICES *FamilyServices;
+
+  FamilyServices = NULL;
+
+  GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+  if (FamilyServices != NULL) {
+    FamilyServices->CpuSetTscFreqSel (FamilyServices, StdHeader);
+  }
+
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set TSC Frequency Selection to all cores.
+ *
+ * This function set TscFreqSel to all cores in the system.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+SetCoresTscFreqSel (
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  AP_TASK                 TaskPtr;
+  UINT32                  BscSocket;
+  UINT32                  Ignored;
+  UINT32                  BscCoreNum;
+  UINT32                  Core;
+  UINT32                  Socket;
+  UINT32                  NumberOfSockets;
+  UINT32                  NumberOfCores;
+  AGESA_STATUS            IgnoredSts;
+
+  ASSERT (IsBsp (StdHeader, &IgnoredSts));
+
+  IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  SetTscFreqSel (StdHeader);
+
+  TaskPtr.FuncAddress.PfApTask = SetTscFreqSel;
+  TaskPtr.ExeFlags = WAIT_FOR_CORE;
+  TaskPtr.DataTransfer.DataTransferFlags = 0;
+  TaskPtr.DataTransfer.DataSizeInDwords = 0;
+  TaskPtr.DataTransfer.DataPtr = NULL;
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+      for (Core = 0; Core < NumberOfCores; Core++) {
+        if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+          ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+        }
+      }
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPostInit.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPostInit.h
new file mode 100644
index 0000000000..ba63768f88
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPostInit.h
@@ -0,0 +1,239 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Reset API, and related functions and structures.
+ *
+ * Contains code that initialized the CPU after early reset.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_POST_INIT_H_
+#define _CPU_POST_INIT_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+//  Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (CPU_CFOH_FAMILY_SERVICES);
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+#define P_STATE_DATA_GATHER_TEMP_ADDR     0x200000 ///< Fixed the row data at 2M memory address.
+#define GLOBAL_CPU_FEATURE_LIST_TEMP_ADDR 0x200000 ///< Fixed the row data at 2M memory address.
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+//----------------------------------------------------------------------------
+//                         CPU FEATURE LEVELING TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// CPU FEATURE LIST
+typedef struct {
+  UINT8  ABM:1;             ///< byte 0 bit 0
+  UINT8  AES:1;             ///< byte 0 bit 1
+  UINT8  AltMovCr8:1;       ///< byte 0 bit 2
+  UINT8  APIC:1;            ///< byte 0 bit 3
+  UINT8  AVX:1;             ///< byte 0 bit 4
+  UINT8  CLFSH:1;           ///< byte 0 bit 5
+  UINT8  CMOV:1;            ///< byte 0 bit 6
+  UINT8  CmpLegacy:1;       ///< byte 0 bit 7
+  UINT8  CMPXCHG8B:1;       ///< byte 1 bit 0
+  UINT8  CMPXCHG16B:1;      ///< byte 1 bit 1
+  UINT8  CVT16:1;           ///< byte 1 bit 2
+  UINT8  DE:1;              ///< byte 1 bit 3
+  UINT8  ExtApicSpace:1;    ///< byte 1 bit 4
+  UINT8  FFXSR:1;           ///< byte 1 bit 5
+  UINT8  FMA:1;             ///< byte 1 bit 6
+  UINT8  FMA4:1;            ///< byte 1 bit 7
+  UINT8  FPU:1;             ///< byte 2 bit 0
+  UINT8  FXSR:1;            ///< byte 2 bit 1
+  UINT8  HTT:1;             ///< byte 2 bit 2
+  UINT8  IBS:1;             ///< byte 2 bit 3
+  UINT8  LahfSahf:1;        ///< byte 2 bit 4
+  UINT8  LM:1;              ///< byte 2 bit 5
+  UINT8  LWP:1;             ///< byte 2 bit 6
+  UINT8  MCA:1;             ///< byte 2 bit 7
+  UINT8  MCE:1;             ///< byte 3 bit 0
+  UINT8  MisAlignSse:1;     ///< byte 3 bit 1
+  UINT8  MMX:1;             ///< byte 3 bit 2
+  UINT8  MmxExt:1;          ///< byte 3 bit 3
+  UINT8  Monitor:1;         ///< byte 3 bit 4
+  UINT8  MSR:1;             ///< byte 3 bit 5
+  UINT8  MTRR:1;            ///< byte 3 bit 6
+  UINT8  NodeId:1;          ///< byte 3 bit 7
+  UINT8  NX:1;              ///< byte 4 bit 0
+  UINT8  OSVW:1;            ///< byte 4 bit 1
+  UINT8  OSXSAVE:1;         ///< byte 4 bit 2
+  UINT8  PAE:1;             ///< byte 4 bit 3
+  UINT8  Page1GB:1;         ///< byte 4 bit 4
+  UINT8  PAT:1;             ///< byte 4 bit 5
+  UINT8  PCLMULQDQ:1;       ///< byte 4 bit 6
+  UINT8  PGE:1;             ///< byte 4 bit 7
+  UINT8  POPCNT:1;          ///< byte 5 bit 0
+  UINT8  PSE:1;             ///< byte 5 bit 1
+  UINT8  PSE36:1;           ///< byte 5 bit 2
+  UINT8  RDTSCP:1;          ///< byte 5 bit 3
+  UINT8  SKINIT:1;          ///< byte 5 bit 4
+  UINT8  SSE:1;             ///< byte 5 bit 5
+  UINT8  SSE2:1;            ///< byte 5 bit 6
+  UINT8  SSE3:1;            ///< byte 5 bit 7
+  UINT8  SSE4A:1;           ///< byte 6 bit 0
+  UINT8  SSE41:1;           ///< byte 6 bit 1
+  UINT8  SSE42:1;           ///< byte 6 bit 2
+  UINT8  SSE5:1;            ///< byte 6 bit 3
+  UINT8  SSSE3:1;           ///< byte 6 bit 4
+  UINT8  SVM:1;             ///< byte 6 bit 5
+  UINT8  SysCallSysRet:1;   ///< byte 6 bit 6
+  UINT8  SysEnterSysExit:1; ///< byte 6 bit 7
+  UINT8  TBM0:1;            ///< byte 7 bit 0
+  UINT8  TCE:1;             ///< byte 7 bit 1
+  UINT8  ThreeDNow:1;       ///< byte 7 bit 2
+  UINT8  ThreeDNowExt:1;    ///< byte 7 bit 3
+  UINT8  ThreeDNowPrefetch:1; ///< byte 7 bit 4
+  UINT8  TimeStampCounter:1;  ///< byte 7 bit 5
+  UINT8  VME:1;             ///< byte 7 bit 6
+  UINT8  WDT:1;             ///< byte 7 bit 7
+  UINT8  X2APIC:1;          ///< byte 8 bit 0
+  UINT8  XOP:1;             ///< byte 8 bit 1
+  UINT8  XSAVE:1;           ///< byte 8 bit 2
+  UINT8  Reserve:5;         ///< Reserved
+} CPU_FEATURES_LIST;
+
+//----------------------------------------------------------------------------
+//                         POST INIT TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// BSC to AP MSR sync up
+typedef struct {
+  UINT32 RegisterAddress;   ///< MSR Address
+  UINT64 RegisterValue;     ///< BSC's MSR Value
+} BSC_AP_MSR_SYNC;
+
+/**
+ *  Set Cache Flush On Halt Register.
+ *
+ *  @CpuServiceInstances
+ *
+ * @param[in]          FamilySpecificServices   The current Family Specific Services.
+ * @param[in]          EntryPoint               Timepoint designator.
+ * @param[in]          PlatformConfig           Contains the runtime modifiable feature input data.
+ * @param[in]          StdHeader                Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID (F_CPU_SET_CFOH_REG) (
+  IN       CPU_CFOH_FAMILY_SERVICES     *FamilySpecificServices,
+  IN       UINT64                       EntryPoint,
+  IN       PLATFORM_CONFIGURATION       *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS            *StdHeader
+  );
+
+ /// Reference to a Method.
+typedef F_CPU_SET_CFOH_REG *PF_CPU_SET_CFOH_REG;
+
+/**
+ * Provide the interface to the Cache Flush On Halt Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _CPU_CFOH_FAMILY_SERVICES {                     // See forward reference above
+  UINT16          Revision;                             ///< Interface version
+  // Public Methods.
+  PF_CPU_SET_CFOH_REG SetCacheFlushOnHaltRegister;    ///< Method: Set Cache Flush On Halt register.
+};
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+//                   These are   P U B L I C   functions, used by IBVs
+AGESA_STATUS
+AmdCpuPost (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig
+  );
+
+//                   These are   P U B L I C   functions, used by AGESA
+
+VOID
+FeatureLeveling (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+CopyHeapToTempRamAtPost (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+SyncApMsrsToBsc (
+  IN OUT   BSC_AP_MSR_SYNC    *ApMsrSync,
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+AGESA_STATUS
+FinalizeAtPost (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+SetCoresTscFreqSel (
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  );
+
+AGESA_STATUS
+GetPstateGatherDataAddressAtPost (
+     OUT   UINT64            **Ptr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+SyncAllApMtrrToBsc (
+  IN       VOID *MtrrTable,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+#endif  // _CPU_POST_INIT_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmt.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmt.c
new file mode 100644
index 0000000000..8cfa58d5d9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmt.c
@@ -0,0 +1,252 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Power Management functions.
+ *
+ * Contains code for doing early power management
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56322 $   @e \$Date: 2011-07-11 16:51:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "OptionMultiSocket.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "cpuPowerMgmtSystemTables.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_CPUPOWERMGMT_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+PerformThisPmStep (
+  IN       VOID *Step,
+  IN       AMD_CONFIG_PARAMS    *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+  );
+
+VOID
+STATIC
+GoToMemInitPstateCore0 (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+  );
+
+VOID
+STATIC
+GoToMemInitPstateCore (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the "BIOS Requirements for P-State Initialization and Transitions."
+ *
+ * This is the generic arbiter code to be executed by the BSC.  The system power
+ * management init tables will be traversed.  This must be run by the system BSC
+ * only.
+ *
+ * @param[in]  CpuEarlyParams    Required input parameters for early CPU initialization
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ * @return     Most severe AGESA_STATUS level that any system processor encountered
+ *
+ */
+AGESA_STATUS
+PmInitializationAtEarly (
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  )
+{
+  UINT8              i;
+  UINT8              NumberOfSystemWideSteps;
+  AP_TASK            TaskPtr;
+  AGESA_STATUS       ReturnCode;
+  WARM_RESET_REQUEST Request;
+
+  // Determine the number of steps to perform
+  OptionMultiSocketConfiguration.GetNumberOfSystemPmSteps (&NumberOfSystemWideSteps, StdHeader);
+
+  // Traverse the PM init table
+  TaskPtr.FuncAddress.PfApTaskIC = PerformThisPmStep;
+  TaskPtr.DataTransfer.DataSizeInDwords = 1;
+  TaskPtr.DataTransfer.DataPtr = &i;
+  TaskPtr.DataTransfer.DataTransferFlags = 0;
+  TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+  for (i = 0; i < NumberOfSystemWideSteps; ++i) {
+    IDS_HDT_CONSOLE (CPU_TRACE, "  Perform PM init step %d\n", i);
+    OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, CpuEarlyParams);
+  }
+
+  // GoToMemInitPstateCore0 only if there is no pending warm reset.
+  GetWarmResetFlag (StdHeader, &Request);
+  if (Request.RequestBit == FALSE) {
+    TaskPtr.FuncAddress.PfApTaskC = GoToMemInitPstateCore0;
+    TaskPtr.DataTransfer.DataSizeInDwords = 0;
+    TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+    IDS_HDT_CONSOLE (CPU_TRACE, "  Transition all cores to POST P-state\n");
+    OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, CpuEarlyParams);
+  }
+
+  // Retrieve/Process any errors
+  ReturnCode = OptionMultiSocketConfiguration.BscRetrievePmEarlyInitErrors (StdHeader);
+
+  return (ReturnCode);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Performs the next step in the executing core 0's family specific power
+ * management table.
+ *
+ * This function determines if the input step is valid, and invokes the power
+ * management step if appropriate.  This must be run by processor core 0s only.
+ *
+ * @param[in]  Step              Zero based step number
+ * @param[in]  StdHeader         Config handle for library and services
+ * @param[in]  CpuEarlyParamsPtr Required input parameters for early CPU initialization
+ *
+ */
+VOID
+STATIC
+PerformThisPmStep (
+  IN       VOID *Step,
+  IN       AMD_CONFIG_PARAMS    *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+  )
+{
+  UINT8  MyNumberOfSteps;
+  SYS_PM_TBL_STEP *FamilyTablePtr;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->GetSysPmTableStruct (FamilySpecificServices, (CONST VOID **) &FamilyTablePtr, &MyNumberOfSteps, StdHeader);
+
+  if (*(UINT8 *)Step < MyNumberOfSteps) {
+    if (FamilyTablePtr[*(UINT8 *)Step].FuncPtr != NULL) {
+      if (!(BOOLEAN) (FamilyTablePtr[*(UINT8 *)Step].ExeFlags & PM_EXEFLAGS_WARM_ONLY) ||
+          IsWarmReset (StdHeader)) {
+        FamilyTablePtr[*(UINT8 *)Step].FuncPtr (FamilySpecificServices, CpuEarlyParamsPtr, StdHeader);
+      }
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Transitions the executing processor to the desired P-state.
+ *
+ * This function implements the AMD_CPU_EARLY_PARAMS.MemInitPState parameter, and is
+ * run by all processor core 0s.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ * @param[in]  CpuEarlyParamsPtr Required input parameters for early CPU initialization
+ *
+ */
+VOID
+STATIC
+GoToMemInitPstateCore0 (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+  )
+{
+  AP_TASK      TaskPtr;
+
+  TaskPtr.FuncAddress.PfApTaskC = GoToMemInitPstateCore;
+  TaskPtr.DataTransfer.DataSizeInDwords = 0;
+  TaskPtr.ExeFlags = WAIT_FOR_CORE | PASS_EARLY_PARAMS;
+  ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Transitions the executing core to the desired P-state.
+ *
+ * This function implements the AMD_CPU_EARLY_PARAMS.MemInitPState parameter, and is
+ * run by all system cores.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ * @param[in]  CpuEarlyParamsPtr Required input parameters for early CPU initialization
+ *
+ */
+VOID
+STATIC
+GoToMemInitPstateCore (
+  IN       AMD_CONFIG_PARAMS    *StdHeader,
+  IN       AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+  )
+{
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->TransitionPstate (FamilySpecificServices, CpuEarlyParamsPtr->MemInitPState, (BOOLEAN) FALSE, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtMultiSocket.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtMultiSocket.c
new file mode 100644
index 0000000000..2e465f6b19
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtMultiSocket.c
@@ -0,0 +1,570 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Power Management Multisocket Functions.
+ *
+ * Contains code for doing power management for multisocket CPUs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56322 $   @e \$Date: 2011-07-11 16:51:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPowerMgmtSystemTables.h"
+#include "cpuPowerMgmtMultiSocket.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_CPUPOWERMGMTMULTISOCKET_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+GetNextEvent (
+  IN OUT   VOID  *EventLogEntryPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Multisocket BSC call to start all system core 0s to perform a standard AP_TASK.
+ *
+ * This function loops through all possible socket locations, starting core 0 of
+ * each populated socket to perform the passed in AP_TASK.  After starting all
+ * other core 0s, the BSC will perform the AP_TASK as well.  This must be run by
+ * the system BSC only.
+ *
+ * @param[in]  TaskPtr           Function descriptor
+ * @param[in]  StdHeader         Config handle for library and services
+ * @param[in]  ConfigParams      AMD entry point's CPU parameter structure
+ *
+ */
+VOID
+RunCodeOnAllSystemCore0sMulti (
+  IN       AP_TASK *TaskPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       VOID *ConfigParams
+  )
+{
+  UINT32 BscSocket;
+  UINT32 BscModule;
+  UINT32 BscCoreNum;
+  UINT8  Socket;
+  UINT32 NumberOfSockets;
+  AGESA_STATUS DummyStatus;
+
+  ASSERT (IsBsp (StdHeader, &DummyStatus));
+
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  IdentifyCore (StdHeader, &BscSocket, &BscModule, &BscCoreNum, &DummyStatus);
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (Socket != BscSocket) {
+      if (IsProcessorPresent (Socket, StdHeader)) {
+        ApUtilRunCodeOnSocketCore (Socket, 0, TaskPtr, StdHeader);
+      }
+    }
+  }
+  ApUtilTaskOnExecutingCore (TaskPtr, StdHeader, ConfigParams);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Multisocket BSC call to determine the maximum number of steps that any single
+ * processor needs to execute.
+ *
+ * This function loops through all possible socket locations, gathering the number
+ * of power management steps each populated socket requires, and returns the
+ * highest number.
+ *
+ * @param[out] NumSystemSteps    Maximum number of system steps required
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+GetNumberOfSystemPmStepsPtrMulti (
+     OUT   UINT8 *NumSystemSteps,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8  NumberOfSteps;
+  UINT32 NumberOfSockets;
+  UINT32 Socket;
+  SYS_PM_TBL_STEP *Ignored;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+  *NumSystemSteps = 0;
+
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      GetCpuServicesOfSocket (Socket, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+      FamilySpecificServices->GetSysPmTableStruct (FamilySpecificServices, (CONST VOID **) &Ignored, &NumberOfSteps, StdHeader);
+      if (NumberOfSteps > *NumSystemSteps) {
+        *NumSystemSteps = NumberOfSteps;
+      }
+    }
+  }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Multisocket call to determine the frequency that the northbridges must run.
+ *
+ * This function loops through all possible socket locations, comparing the
+ * maximum NB frequencies to determine the slowest.  This function also
+ * determines if all coherent NB frequencies are equivalent.
+ *
+ * @param[in]  NbPstate                    NB P-state number to check (0 = fastest)
+ * @param[in]  PlatformConfig              Platform profile/build option config structure.
+ * @param[out] SystemNbCofNumerator        NB frequency numerator for the system in MHz
+ * @param[out] SystemNbCofDenominator      NB frequency denominator for the system
+ * @param[out] SystemNbCofsMatch           Whether or not all NB frequencies are equivalent
+ * @param[out] NbPstateIsEnabledOnAllCPUs  Whether or not NbPstate is valid on all CPUs
+ * @param[in]  StdHeader                   Config handle for library and services
+ *
+ * @retval     TRUE                        At least one processor has NbPstate enabled.
+ * @retval     FALSE                       NbPstate is disabled on all CPUs
+ *
+ */
+BOOLEAN
+GetSystemNbCofMulti (
+  IN       UINT32 NbPstate,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+     OUT   UINT32 *SystemNbCofNumerator,
+     OUT   UINT32 *SystemNbCofDenominator,
+     OUT   BOOLEAN *SystemNbCofsMatch,
+     OUT   BOOLEAN *NbPstateIsEnabledOnAllCPUs,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32   Socket;
+  UINT8    Module;
+  UINT32   CurrentNbCof;
+  UINT32   CurrentDivisor;
+  UINT32   CurrentFreq;
+  UINT32   LowFrequency;
+  UINT32   Ignored32;
+  BOOLEAN  FirstCofNotFound;
+  BOOLEAN  NbPstateDisabled;
+  BOOLEAN  IsNbPstateEnabledOnAny;
+  PCI_ADDR PciAddress;
+  AGESA_STATUS Ignored;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  // Find the slowest NB COF in the system & whether or not all are equivalent
+  LowFrequency = 0xFFFFFFFF;
+  *SystemNbCofsMatch = TRUE;
+  *NbPstateIsEnabledOnAllCPUs = FALSE;
+  IsNbPstateEnabledOnAny = FALSE;
+  FirstCofNotFound = TRUE;
+  NbPstateDisabled = FALSE;
+  for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      GetCpuServicesOfSocket (Socket, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+      for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+        if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &Ignored)) {
+          break;
+        }
+      }
+      if (FamilySpecificServices->GetNbPstateInfo (FamilySpecificServices,
+                                                   PlatformConfig,
+                                                   &PciAddress,
+                                                   NbPstate,
+                                                   &CurrentNbCof,
+                                                   &CurrentDivisor,
+                                                   &Ignored32,
+                                                   StdHeader)) {
+        ASSERT (CurrentDivisor != 0);
+        CurrentFreq = (CurrentNbCof / CurrentDivisor);
+        if (FirstCofNotFound) {
+          *SystemNbCofNumerator = CurrentNbCof;
+          *SystemNbCofDenominator = CurrentDivisor;
+          LowFrequency = CurrentFreq;
+          IsNbPstateEnabledOnAny = TRUE;
+          if (!NbPstateDisabled) {
+            *NbPstateIsEnabledOnAllCPUs = TRUE;
+          }
+          FirstCofNotFound = FALSE;
+        } else {
+          if (CurrentFreq != LowFrequency) {
+            *SystemNbCofsMatch = FALSE;
+            if (CurrentFreq < LowFrequency) {
+              LowFrequency = CurrentFreq;
+              *SystemNbCofNumerator = CurrentNbCof;
+              *SystemNbCofDenominator = CurrentDivisor;
+            }
+          }
+        }
+      } else {
+        NbPstateDisabled = TRUE;
+        *NbPstateIsEnabledOnAllCPUs = FALSE;
+      }
+    }
+  }
+  return IsNbPstateEnabledOnAny;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Multisocket call to determine if the BIOS is responsible for updating the
+ * northbridge operating frequency and voltage.
+ *
+ * This function loops through all possible socket locations, checking whether
+ * any populated sockets require NB COF VID programming.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ * @retval     TRUE    BIOS needs to set up NB frequency and voltage
+ * @retval     FALSE   BIOS does not need to set up NB frequency and voltage
+ *
+ */
+BOOLEAN
+GetSystemNbCofVidUpdateMulti (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8    Module;
+  UINT32   Socket;
+  UINT32   NumberOfSockets;
+  BOOLEAN  IgnoredBool;
+  BOOLEAN  AtLeast1RequiresUpdate;
+  PCI_ADDR PciAddress;
+  AGESA_STATUS Ignored;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+
+  AtLeast1RequiresUpdate = FALSE;
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      GetCpuServicesOfSocket (Socket, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+      for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+        if (GetPciAddress (StdHeader, (UINT8) Socket, Module, &PciAddress, &Ignored)) {
+          break;
+        }
+      }
+      if (FamilySpecificServices->IsNbCofInitNeeded (FamilySpecificServices, &PciAddress, &IgnoredBool, StdHeader)) {
+        AtLeast1RequiresUpdate = TRUE;
+        break;
+      }
+    }
+  }
+  return AtLeast1RequiresUpdate;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Multisocket call to determine the most severe AGESA_STATUS return value after
+ * processing the power management initialization tables.
+ *
+ * This function loops through all possible socket locations, collecting any
+ * power management initialization errors that may have occurred.  These errors
+ * are transferred from the core 0s of the socket in which the errors occurred
+ * to the BSC's heap.  The BSC's heap is then searched for the most severe error
+ * that occurred, and returns it.  This function must be called by the BSC only.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ * @return     The most severe error code from power management init
+ *
+ */
+AGESA_STATUS
+GetEarlyPmErrorsMulti (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT16 i;
+  UINT32 BscSocket;
+  UINT32 BscModule;
+  UINT32 BscCoreNum;
+  UINT32 Socket;
+  UINT32 NumberOfSockets;
+  AP_TASK      TaskPtr;
+  AGESA_EVENT  EventLogEntry;
+  AGESA_STATUS ReturnCode;
+  AGESA_STATUS DummyStatus;
+
+  ASSERT (IsBsp (StdHeader, &ReturnCode));
+
+  ReturnCode = AGESA_SUCCESS;
+  EventLogEntry.EventClass = AGESA_SUCCESS;
+  EventLogEntry.EventInfo = 0;
+  EventLogEntry.DataParam1 = 0;
+  EventLogEntry.DataParam2 = 0;
+  EventLogEntry.DataParam3 = 0;
+  EventLogEntry.DataParam4 = 0;
+
+  NumberOfSockets = GetPlatformNumberOfSockets ();
+  IdentifyCore (StdHeader, &BscSocket, &BscModule, &BscCoreNum, &DummyStatus);
+
+  TaskPtr.FuncAddress.PfApTaskI = GetNextEvent;
+  TaskPtr.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (AGESA_EVENT);
+  TaskPtr.DataTransfer.DataPtr = &EventLogEntry;
+  TaskPtr.DataTransfer.DataTransferFlags = 0;
+  TaskPtr.ExeFlags = WAIT_FOR_CORE | RETURN_PARAMS;
+  for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+    if (Socket != BscSocket) {
+      if (IsProcessorPresent (Socket, StdHeader)) {
+        do {
+          ApUtilRunCodeOnSocketCore ((UINT8)Socket, (UINT8) 0, &TaskPtr, StdHeader);
+          if ((EventLogEntry.EventInfo & CPU_EVENT_PM_EVENT_MASK) == CPU_EVENT_PM_EVENT_CLASS) {
+            PutEventLog (
+              EventLogEntry.EventClass,
+              EventLogEntry.EventInfo,
+              EventLogEntry.DataParam1,
+              EventLogEntry.DataParam2,
+              EventLogEntry.DataParam3,
+              EventLogEntry.DataParam4,
+              StdHeader
+              );
+          }
+        } while (EventLogEntry.EventInfo != 0);
+      }
+    }
+  }
+
+  for (i = 0; PeekEventLog (&EventLogEntry, i, StdHeader); i++) {
+    if ((EventLogEntry.EventInfo & CPU_EVENT_PM_EVENT_MASK) == CPU_EVENT_PM_EVENT_CLASS) {
+      if (EventLogEntry.EventClass > ReturnCode) {
+        ReturnCode = EventLogEntry.EventClass;
+      }
+    }
+  }
+  return (ReturnCode);
+}
+
+/**
+ * Multisocket call to loop through all possible socket locations and Nb Pstates,
+ * comparing the NB frequencies to determine the slowest system and P0 frequency
+ *
+ * @param[in]  PlatformConfig      Platform profile/build option config structure.
+ * @param[out] MinSysNbFreq        NB frequency numerator for the system in MHz
+ * @param[out] MinP0NbFreq         NB frequency numerator for P0 in MHz
+ * @param[in]  StdHeader           Config handle for library and services
+ */
+VOID
+GetMinNbCofMulti (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+     OUT   UINT32                 *MinSysNbFreq,
+     OUT   UINT32                 *MinP0NbFreq,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32                Socket;
+  UINT32                Module;
+  UINT32                CurrMinFreq;
+  UINT32                CurrMaxFreq;
+  PCI_ADDR              PciAddress;
+  AGESA_STATUS          Ignored;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  *MinSysNbFreq = 0xFFFFFFFF;
+  *MinP0NbFreq  = 0xFFFFFFFF;
+
+  for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+    if (IsProcessorPresent (Socket, StdHeader)) {
+      GetCpuServicesOfSocket (Socket, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+      for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+        if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &Ignored )) {
+          break;
+        }
+      }
+
+
+      FamilySpecificServices->GetMinMaxNbFrequency (FamilySpecificServices,
+                                                      PlatformConfig,
+                                                      &PciAddress,
+                                                      &CurrMinFreq,
+                                                      &CurrMaxFreq,
+                                                      StdHeader);
+      // Determine the slowest NB Pmin frequency
+      if (CurrMinFreq < *MinSysNbFreq) {
+        *MinSysNbFreq = CurrMinFreq;
+      }
+
+      // Determine the slowest NB P0 frequency
+      if (CurrMaxFreq < *MinP0NbFreq) {
+        *MinP0NbFreq = CurrMaxFreq;
+      }
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get PCI Config Space Address for the current running core.
+ *
+ * @param[out]   PciAddress   The Processor's PCI Config Space address (Function 0, Register 0)
+ * @param[in]    StdHeader    Header for library and services.
+ *
+ * @retval       TRUE         The core is present, PCI Address valid
+ * @retval       FALSE        The core is not present, PCI Address not valid.
+ */
+BOOLEAN
+GetCurrPciAddrMulti (
+     OUT   PCI_ADDR               *PciAddress,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT8        Node;
+  UINT32       Socket;
+  UINT32       Module;
+  UINT32       Core;
+  BOOLEAN      Result;
+  AGESA_STATUS IgnoredSts;
+
+  Result = TRUE;
+
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+
+  ASSERT (Socket < MAX_SOCKETS);
+  ASSERT (Module < MAX_DIES);
+
+  if (GetNodeId (Socket, Module, &Node, StdHeader)) {
+    // Socket is populated
+    PciAddress->AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+    PciAddress->Address.Device = PciAddress->Address.Device + Node;
+  } else {
+    // Socket is not populated
+    PciAddress->AddressValue = ILLEGAL_SBDFO;
+    Result = FALSE;
+  }
+
+  return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Writes to all nodes on the executing core's socket.
+ *
+ *  @param[in]     PciAddress    The Function and Register to update
+ *  @param[in]     Mask          The bitwise AND mask to apply to the current register value
+ *  @param[in]     Data          The bitwise OR mask to apply to the current register value
+ *  @param[in]     StdHeader     Header for library and services.
+ *
+ */
+VOID
+ModifyCurrSocketPciMulti (
+  IN       PCI_ADDR               *PciAddress,
+  IN       UINT32                 Mask,
+  IN       UINT32                 Data,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32 Socket;
+  UINT32 Module;
+  UINT32 Core;
+  UINT32 LocalPciRegister;
+  AGESA_STATUS AgesaStatus;
+  PCI_ADDR Reg;
+
+  IdentifyCore (StdHeader, &Socket, &Module, &Core, &AgesaStatus);
+
+  for (Module = 0; Module < (UINT8)GetPlatformNumberOfModules (); Module++) {
+    if (GetPciAddress (StdHeader, Socket, Module, &Reg, &AgesaStatus)) {
+      Reg.Address.Function = PciAddress->Address.Function;
+      Reg.Address.Register = PciAddress->Address.Register;
+      LibAmdPciRead (AccessWidth32, Reg, &LocalPciRegister, StdHeader);
+      LocalPciRegister &= Mask;
+      LocalPciRegister |= Data;
+      LibAmdPciWrite (AccessWidth32, Reg, &LocalPciRegister, StdHeader);
+    }
+  }
+}
+
+/*---------------------------------------------------------------------------------------
+ *                           L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * AP task to return the next event log entry to the BSC.
+ *
+ * This function calls to the event log manager to retrieve the next error out
+ * of the heap.
+ *
+ * @param[out] EventLogEntryPtr  The AP's next event log entry
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+STATIC
+GetNextEvent (
+  IN OUT   VOID  *EventLogEntryPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  GetEventLog ((AGESA_EVENT *) EventLogEntryPtr, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtMultiSocket.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtMultiSocket.h
new file mode 100644
index 0000000000..78f5ce74a9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtMultiSocket.h
@@ -0,0 +1,127 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Power Management Multisocket Functions.
+ *
+ * Contains code for doing power management for multisocket CPUs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_POWER_MGMT_MULTI_SOCKET_H_
+#define _CPU_POWER_MGMT_MULTI_SOCKET_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+RunCodeOnAllSystemCore0sMulti (
+  IN       AP_TASK *TaskPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       VOID *ConfigParams
+  );
+
+VOID
+GetNumberOfSystemPmStepsPtrMulti (
+     OUT   UINT8 *NumSystemSteps,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+GetSystemNbCofMulti (
+  IN       UINT32 NbPstate,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+     OUT   UINT32 *SystemNbCofNumerator,
+     OUT   UINT32 *SystemNbCofDenominator,
+     OUT   BOOLEAN *SystemNbCofsMatch,
+     OUT   BOOLEAN *NbPstateIsEnabledOnAllCPUs,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+GetSystemNbCofVidUpdateMulti (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+GetMinNbCofMulti (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+     OUT   UINT32                 *MinSysNbFreq,
+     OUT   UINT32                 *MinP0NbFreq,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+BOOLEAN
+GetCurrPciAddrMulti (
+     OUT   PCI_ADDR               *PciAddress,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+ModifyCurrSocketPciMulti (
+  IN       PCI_ADDR               *PciAddress,
+  IN       UINT32                 Mask,
+  IN       UINT32                 Data,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+AGESA_STATUS
+GetEarlyPmErrorsMulti (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+#endif  // _CPU_POWER_MGMT_MULTI_SOCKET_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtSingleSocket.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtSingleSocket.c
new file mode 100644
index 0000000000..1d42943e5d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtSingleSocket.c
@@ -0,0 +1,325 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Power Management Single Socket Functions.
+ *
+ * Contains code for doing power management for single socket CPU
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56322 $   @e \$Date: 2011-07-11 16:51:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPowerMgmtSystemTables.h"
+#include "cpuPowerMgmtSingleSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_CPUPOWERMGMTSINGLESOCKET_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Single socket BSC call to start all system core 0s to perform a standard AP_TASK.
+ *
+ * This function will simply invoke the task on the executing core.  This must be
+ * run by the system BSC only.
+ *
+ * @param[in]  TaskPtr           Function descriptor
+ * @param[in]  StdHeader         Config handle for library and services
+ * @param[in]  ConfigParams      AMD entry point's CPU parameter structure
+ *
+ */
+VOID
+RunCodeOnAllSystemCore0sSingle (
+  IN       AP_TASK *TaskPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       VOID *ConfigParams
+  )
+{
+  ApUtilTaskOnExecutingCore (TaskPtr, StdHeader, ConfigParams);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Single socket BSC call to determine the maximum number of steps that any single
+ * processor needs to execute.
+ *
+ * This function simply returns the number of steps that the BSC needs.
+ *
+ * @param[out] NumSystemSteps    Maximum number of system steps required
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ */
+VOID
+GetNumberOfSystemPmStepsPtrSingle (
+     OUT   UINT8 *NumSystemSteps,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  SYS_PM_TBL_STEP *Ignored;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->GetSysPmTableStruct (FamilySpecificServices, (CONST VOID **) &Ignored, NumSystemSteps, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Single socket call to determine the frequency that the northbridges must run.
+ *
+ * This function simply returns the executing core's NB frequency, and that all
+ * NB frequencies are equivalent.
+ *
+ * @param[in]  NbPstate                    NB P-state number to check (0 = fastest)
+ * @param[in]  PlatformConfig              Platform profile/build option config structure.
+ * @param[out] SystemNbCofNumerator        NB frequency numerator for the system in MHz
+ * @param[out] SystemNbCofDenominator      NB frequency denominator for the system
+ * @param[out] SystemNbCofsMatch           Whether or not all NB frequencies are equivalent
+ * @param[out] NbPstateIsEnabledOnAllCPUs  Whether or not NbPstate is valid on all CPUs
+ * @param[in]  StdHeader                   Config handle for library and services
+ *
+ * @retval     TRUE                        At least one processor has NbPstate enabled.
+ * @retval     FALSE                       NbPstate is disabled on all CPUs
+ *
+ */
+BOOLEAN
+GetSystemNbCofSingle (
+  IN       UINT32 NbPstate,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+     OUT   UINT32 *SystemNbCofNumerator,
+     OUT   UINT32 *SystemNbCofDenominator,
+     OUT   BOOLEAN *SystemNbCofsMatch,
+     OUT   BOOLEAN *NbPstateIsEnabledOnAllCPUs,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32 Ignored;
+  PCI_ADDR PciAddress;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+  *SystemNbCofsMatch = TRUE;
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  *NbPstateIsEnabledOnAllCPUs = FamilySpecificServices->GetNbPstateInfo (FamilySpecificServices,
+                                                                         PlatformConfig,
+                                                                         &PciAddress,
+                                                                         NbPstate,
+                                                                         SystemNbCofNumerator,
+                                                                         SystemNbCofDenominator,
+                                                                         &Ignored,
+                                                                         StdHeader);
+  return *NbPstateIsEnabledOnAllCPUs;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Single socket call to determine if the BIOS is responsible for updating the
+ * northbridge operating frequency and voltage.
+ *
+ * This function simply returns whether or not the executing core needs NB COF
+ * VID programming.
+ *
+ * @param[in]  StdHeader              Config handle for library and services
+ *
+ * @retval     TRUE    BIOS needs to set up NB frequency and voltage
+ * @retval     FALSE   BIOS does not need to set up NB frequency and voltage
+ *
+ */
+BOOLEAN
+GetSystemNbCofVidUpdateSingle (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN   Ignored;
+  PCI_ADDR PciAddress;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  return (FamilySpecificServices->IsNbCofInitNeeded (FamilySpecificServices, &PciAddress, &Ignored, StdHeader));
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Single socket call to determine the most severe AGESA_STATUS return value after
+ * processing the power management initialization tables.
+ *
+ * This function searches the event log for the most severe error and returns
+ * the status code.  This function must be called by the BSC only.
+ *
+ * @param[in]  StdHeader         Config handle for library and services
+ *
+ * @return     The most severe error code from power management init
+ *
+ */
+AGESA_STATUS
+GetEarlyPmErrorsSingle (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT16       i;
+  AGESA_EVENT  EventLogEntry;
+  AGESA_STATUS ReturnCode;
+
+  ASSERT (IsBsp (StdHeader, &ReturnCode));
+
+  ReturnCode = AGESA_SUCCESS;
+  for (i = 0; PeekEventLog (&EventLogEntry, i, StdHeader); i++) {
+    if ((EventLogEntry.EventInfo & CPU_EVENT_PM_EVENT_MASK) == CPU_EVENT_PM_EVENT_CLASS) {
+      if (EventLogEntry.EventClass > ReturnCode) {
+        ReturnCode = EventLogEntry.EventClass;
+      }
+    }
+  }
+
+  return (ReturnCode);
+}
+
+/**
+ * Single socket call to loop through all Nb Pstates, comparing the NB frequencies
+ * to determine the slowest in the system. This routine also returns the NB P0 frequency.
+ *
+ * @param[in]  PlatformConfig      Platform profile/build option config structure.
+ * @param[out] MinSysNbFreq        NB frequency numerator for the system in MHz
+ * @param[out] MinP0NbFreq         NB frequency numerator for P0 in MHz
+ * @param[in]  StdHeader           Config handle for library and services
+ */
+VOID
+GetMinNbCofSingle (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+     OUT   UINT32                 *MinSysNbFreq,
+     OUT   UINT32                 *MinP0NbFreq,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  PCI_ADDR              PciAddress;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  PciAddress.AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->GetMinMaxNbFrequency (FamilySpecificServices,
+                                             PlatformConfig,
+                                             &PciAddress,
+                                             MinSysNbFreq,
+                                             MinP0NbFreq,
+                                             StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get PCI Config Space Address for the current running core.
+ *
+ * @param[out]   PciAddress   The Processor's PCI Config Space address (Function 0, Register 0)
+ * @param[in]    StdHeader    Header for library and services.
+ *
+ * @retval       TRUE         The core is present, PCI Address valid
+ * @retval       FALSE        The core is not present, PCI Address not valid.
+ */
+BOOLEAN
+GetCurrPciAddrSingle (
+     OUT   PCI_ADDR               *PciAddress,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  PciAddress->AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+
+  return TRUE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Writes to all nodes on the executing core's socket.
+ *
+ *  @param[in]     PciAddress    The Function and Register to update
+ *  @param[in]     Mask          The bitwise AND mask to apply to the current register value
+ *  @param[in]     Data          The bitwise OR mask to apply to the current register value
+ *  @param[in]     StdHeader     Header for library and services.
+ *
+ */
+VOID
+ModifyCurrSocketPciSingle (
+  IN       PCI_ADDR               *PciAddress,
+  IN       UINT32                 Mask,
+  IN       UINT32                 Data,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32 LocalPciRegister;
+  PCI_ADDR Reg;
+
+  Reg.AddressValue     = MAKE_SBDFO (0, 0, 24, 0, 0);
+  Reg.Address.Function = PciAddress->Address.Function;
+  Reg.Address.Register = PciAddress->Address.Register;
+  LibAmdPciRead (AccessWidth32, Reg, &LocalPciRegister, StdHeader);
+  LocalPciRegister &= Mask;
+  LocalPciRegister |= Data;
+  LibAmdPciWrite (AccessWidth32, Reg, &LocalPciRegister, StdHeader);
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtSingleSocket.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtSingleSocket.h
new file mode 100644
index 0000000000..11b71ffa64
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtSingleSocket.h
@@ -0,0 +1,128 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Power Management Single Socket Functions.
+ *
+ * Contains code for doing power management for single socket CPU
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 55600 $   @e \$Date: 2011-06-23 12:39:18 -0600 (Thu, 23 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_POWER_MGMT_SINGLE_SOCKET_H_
+#define _CPU_POWER_MGMT_SINGLE_SOCKET_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+RunCodeOnAllSystemCore0sSingle (
+  IN       AP_TASK *TaskPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       VOID *ConfigParams
+  );
+
+VOID
+GetNumberOfSystemPmStepsPtrSingle (
+     OUT   UINT8 *NumSystemSteps,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+GetSystemNbCofSingle (
+  IN       UINT32 NbPstate,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+     OUT   UINT32 *SystemNbCofNumerator,
+     OUT   UINT32 *SystemNbCofDenominator,
+     OUT   BOOLEAN *SystemNbCofsMatch,
+     OUT   BOOLEAN *NbPstateIsEnabledOnAllCPUs,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+GetSystemNbCofVidUpdateSingle (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+GetMinNbCofSingle (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+     OUT   UINT32                 *MinSysNbFreq,
+     OUT   UINT32                 *MinP0NbFreq,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+BOOLEAN
+GetCurrPciAddrSingle (
+     OUT   PCI_ADDR               *PciAddress,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+ModifyCurrSocketPciSingle (
+  IN       PCI_ADDR               *PciAddress,
+  IN       UINT32                 Mask,
+  IN       UINT32                 Data,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+AGESA_STATUS
+GetEarlyPmErrorsSingle (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+#endif  // _CPU_POWER_MGMT_SINGLE_SOCKET_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtSystemTables.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtSystemTables.h
new file mode 100644
index 0000000000..b4002365af
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuPowerMgmtSystemTables.h
@@ -0,0 +1,93 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Power Management Table declarations.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_POWER_MGMT_SYSTEM_TABLES_H_
+#define _CPU_POWER_MGMT_SYSTEM_TABLES_H_
+
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+#define PM_EXEFLAGS_WARM_ONLY    0x00000001   /* Skip step if set && cold reset */
+#define PM_EXEFLAGS_NOT_ON_S3    0x00000002   /* Skip step if S3 resume */
+#define PM_EXEFLAGS_SYSTEM_TASK  0x00000004   /* Future use */
+#define PM_EXEFLAGS_SERIAL_EXE   0x00000008   /* BSC will wait for remote core 0 to complete the step*/
+
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+typedef VOID F_PM_STEP_FUNCTION (
+  IN       CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+  IN       AMD_CPU_EARLY_PARAMS  *CpuEarlyParamsPtr,
+  IN       AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+/// Reference to a Method.
+typedef F_PM_STEP_FUNCTION *PF_PM_STEP_FUNCTION;
+
+
+/// A structure representing a step in a power management
+/// initialization process to be invoked at AmdInitEarly
+typedef struct {
+  UINT32  ExeFlags;                                   ///< Execution flags
+  PF_PM_STEP_FUNCTION FuncPtr;                        ///< Function pointer
+} SYS_PM_TBL_STEP;
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+
+#endif  // _CPU_POWER_MGMT_SYSTEM_TABLES_H_/
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuRegisters.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuRegisters.h
new file mode 100644
index 0000000000..e81ded365d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuRegisters.h
@@ -0,0 +1,407 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Register Table Related Functions
+ *
+ * Contains the definition of the CPU CPUID MSRs and PCI registers with BKDG recommended values
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 60539 $   @e \$Date: 2011-10-17 17:11:05 -0600 (Mon, 17 Oct 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_REGISTERS_H_
+#define _CPU_REGISTERS_H_
+
+#include "cpuFamRegisters.h"
+/*
+ *--------------------------------------------------------------
+ *
+ *                      M O D U L E S    U S E D
+ *
+ *---------------------------------------------------------------
+ */
+
+/*
+ *--------------------------------------------------------------
+ *
+ *                      D E F I N I T I O N S  /  M A C R O S
+ *
+ *---------------------------------------------------------------
+ */
+
+#define BIT0        0x0000000000000001ull
+#define BIT1        0x0000000000000002ull
+#define BIT2        0x0000000000000004ull
+#define BIT3        0x0000000000000008ull
+#define BIT4        0x0000000000000010ull
+#define BIT5        0x0000000000000020ull
+#define BIT6        0x0000000000000040ull
+#define BIT7        0x0000000000000080ull
+#define BIT8        0x0000000000000100ull
+#define BIT9        0x0000000000000200ull
+#define BIT10       0x0000000000000400ull
+#define BIT11       0x0000000000000800ull
+#define BIT12       0x0000000000001000ull
+#define BIT13       0x0000000000002000ull
+#define BIT14       0x0000000000004000ull
+#define BIT15       0x0000000000008000ull
+#define BIT16       0x0000000000010000ull
+#define BIT17       0x0000000000020000ull
+#define BIT18       0x0000000000040000ull
+#define BIT19       0x0000000000080000ull
+#define BIT20       0x0000000000100000ull
+#define BIT21       0x0000000000200000ull
+#define BIT22       0x0000000000400000ull
+#define BIT23       0x0000000000800000ull
+#define BIT24       0x0000000001000000ull
+#define BIT25       0x0000000002000000ull
+#define BIT26       0x0000000004000000ull
+#define BIT27       0x0000000008000000ull
+#define BIT28       0x0000000010000000ull
+#define BIT29       0x0000000020000000ull
+#define BIT30       0x0000000040000000ull
+#define BIT31       0x0000000080000000ull
+#define BIT32       0x0000000100000000ull
+#define BIT33       0x0000000200000000ull
+#define BIT34       0x0000000400000000ull
+#define BIT35       0x0000000800000000ull
+#define BIT36       0x0000001000000000ull
+#define BIT37       0x0000002000000000ull
+#define BIT38       0x0000004000000000ull
+#define BIT39       0x0000008000000000ull
+#define BIT40       0x0000010000000000ull
+#define BIT41       0x0000020000000000ull
+#define BIT42       0x0000040000000000ull
+#define BIT43       0x0000080000000000ull
+#define BIT44       0x0000100000000000ull
+#define BIT45       0x0000200000000000ull
+#define BIT46       0x0000400000000000ull
+#define BIT47       0x0000800000000000ull
+#define BIT48       0x0001000000000000ull
+#define BIT49       0x0002000000000000ull
+#define BIT50       0x0004000000000000ull
+#define BIT51       0x0008000000000000ull
+#define BIT52       0x0010000000000000ull
+#define BIT53       0x0020000000000000ull
+#define BIT54       0x0040000000000000ull
+#define BIT55       0x0080000000000000ull
+#define BIT56       0x0100000000000000ull
+#define BIT57       0x0200000000000000ull
+#define BIT58       0x0400000000000000ull
+#define BIT59       0x0800000000000000ull
+#define BIT60       0x1000000000000000ull
+#define BIT61       0x2000000000000000ull
+#define BIT62       0x4000000000000000ull
+#define BIT63       0x8000000000000000ull
+
+/// CPUID related registers
+#define AMD_CPUID_FMF               0x80000001  // Family Model Features information
+#define AMD_CPUID_APICID_LPC_BID    0x00000001  // Local APIC ID, Logical Processor Count, Brand ID
+#define AMD_CPUID_TLB_L1Cache       0x80000005
+#define AMD_CPUID_L2L3Cache_L2TLB   0x80000006
+#define CPUID_ASSOCIATIVITY_2_WAY   0x02
+#define CPUID_ASSOCIATIVITY_4_WAY   0x04
+#define CPUID_ASSOCIATIVITY_8_WAY   0x06
+#define CPUID_ASSOCIATIVITY_16_WAY  0x08
+#define CPUID_ASSOCIATIVITY_32_WAY  0x0A
+#define CPUID_ASSOCIATIVITY_48_WAY  0x0B
+#define CPUID_ASSOCIATIVITY_64_WAY  0x0C
+#define CPUID_ASSOCIATIVITY_96_WAY  0x0D
+#define CPUID_ASSOCIATIVITY_128_WAY 0x0E
+#define AMD_CPUID_APM               0x80000007
+#define LOCAL_APIC_ID               24
+#define LOGICAL_PROCESSOR_COUNT     16
+#define AMD_CPUID_ASIZE_PCCOUNT     0x80000008  // Address Size, Physical Core Count
+
+/// CPU Logical ID Transfer
+typedef struct {
+  UINT32         RawId;                         ///< RawID
+  UINT64         LogicalId;                     ///< LogicalID
+} CPU_LOGICAL_ID_XLAT;
+
+/// Logical CPU ID Table
+typedef struct {
+  IN       UINT32  Elements;                    ///< Number of Elements
+  IN       CPU_LOGICAL_ID_XLAT *LogicalIdTable; ///< CPU Logical ID Transfer table Pointer
+} LOGICAL_ID_TABLE;
+
+// MSRs
+// ------------------------
+#define MCG_CTL_P                   0x00000100              // bit 8  for MCG_CTL_P under MSRR
+#define MSR_MCG_CAP                 0x00000179
+#define MSR_MC0_CTL                 0x00000400
+
+#define MSR_APIC_BAR                0x0000001B
+#define MSR_PATCH_LEVEL             0x0000008B
+
+#define CPUID_LONG_MODE_ADDR        0x80000008
+#define AMD_CPUID_FMF               0x80000001
+
+#define MSR_EXTENDED_FEATURE_EN     0xC0000080
+#define MSR_MC_MISC_LINK_THRESHOLD  0xC0000408
+#define MSR_MC_MISC_L3_THRESHOLD    0xC0000409
+#define MSR_PATCH_LOADER            0xC0010020
+
+/// Patch Loader Register
+typedef struct {
+  UINT64 PatchBase:32;                ///< Linear address of patch header address block
+  UINT64 SBZ:32;                      ///< Should be zero
+} PATCH_LOADER_MSR;
+
+#define MSR_SYS_CFG                 0xC0010010      // SYSCFG - F15 Shared
+#define MSR_TOM2                    0xC001001D      // TOP_MEM2 - F15 Shared
+#define MSR_MC0_CTL_MASK            0xC0010044      // MC0 Control Mask
+#define MSR_MC1_CTL_MASK            0xC0010045      // MC1 Control Mask
+#define MSR_MC2_CTL_MASK            0xC0010046      // MC2 Control Mask
+#define MSR_MC4_CTL_MASK            0xC0010048      // MC4 Control Mask
+
+#define MSR_CPUID_FEATS             0xC0011004      // CPUID Features
+#define MSR_CPUID_EXT_FEATS         0xC0011005      // CPUID Extended Features
+#define MSR_HWCR                    0xC0010015
+#define MSR_NB_CFG                  0xC001001F      // NB Config
+#define ENABLE_CF8_EXT_CFG          0x00004000      // [46]
+#define INIT_APIC_CPUID_LO          0x00400000      // [54]
+#define MSR_LS_CFG                  0xC0011020
+#define MSR_IC_CFG                  0xC0011021      // ICache Config - F15 Shared
+#define MSR_DC_CFG                  0xC0011022
+#define MSR_ME_CFG                  0xC0011029
+#define MSR_BU_CFG                  0xC0011023
+#define MSR_CU_CFG                  0xC0011023      // F15 Shared
+#define MSR_DE_CFG                  0xC0011029      // F15 Shared
+#define MSR_BU_CFG2                 0xC001102A
+#define MSR_CU_CFG2                 0xC001102A      // F15 Shared
+#define MSR_BU_CFG3                 0xC001102B
+#define MSR_CU_CFG3                 0xC001102B      // F15 Shared
+#define MSR_LS_CFG2                 0xC001102D
+#define MSR_IBS_OP_DATA3            0xC0011037
+#define MSR_C001_1070               0xC0011070      // F15 Shared
+
+
+#define MSR_CPUID_NAME_STRING0      0xC0010030      // First CPUID namestring register
+#define MSR_CPUID_NAME_STRING1      0xC0010031
+#define MSR_CPUID_NAME_STRING2      0XC0010032
+#define MSR_CPUID_NAME_STRING3      0xC0010033
+#define MSR_CPUID_NAME_STRING4      0xC0010034
+#define MSR_CPUID_NAME_STRING5      0xC0010035      // Last CPUID namestring register
+#define MSR_MMIO_Cfg_Base           0xC0010058      // MMIO Configuration Base Address Register
+#define MSR_BIST                    0xC0010060      // BIST Results register
+#define MSR_OSVW_ID_Length          0xC0010140
+#define MSR_OSVW_Status             0xC0010141
+#define MSR_PERF_CONTROL3           0xC0010003      // Perfromance control register number 3
+#define MSR_PERF_COUNTER3           0xC0010007      // Performance counter register number 3
+#define PERF_RESERVE_BIT_MASK       0x030FFFDFFFFF  // Mask of the Performance control Reserve bits
+#define PERF_CAR_CORRUPTION_EVENT   0x040040F0E2    // Configure the controller to capture the
+                                                    // CAR Corruption
+// FUNC_0 registers
+// ----------------
+#define HT_LINK_FREQ_OFFSET         8           // Link HT Frequency from capability base
+#define HT_LINK_CONTROL_REG_OFFSET  4
+#define HT_LINK_TYPE_REG_OFFSET     0x18
+#define HT_LINK_EXTENDED_FREQ       0x1C
+#define HT_LINK_HOST_CAP_MAX        0x20        // HT Host Capability offsets are less than its size.
+#define HT_CAPABILITIES_POINTER     0x34
+#define NODE_ID                     0x60
+#define HT_INIT_CTRL                0x6C
+#define HT_INIT_CTRL_REQ_DIS        0x02        // [1] = ReqDis
+#define HT_INIT_COLD_RST_DET        BIT4
+#define HT_INIT_BIOS_RST_DET_0      BIT5
+#define HT_INIT_BIOS_RST_DET_1      BIT9
+#define HT_INIT_BIOS_RST_DET_2      BIT10
+#define HT_INIT_BIOS_RST_DET        BIT9 | BIT10
+#define HT_TRANS_CTRL               0x68
+#define HT_TRANS_CTRL_CPU1_EN       0x00000020  // [5] = CPU1 Enable
+#define HT_LINK_CONTROL_0           0x84
+#define HT_LINK_FREQ_0              0x88        // Link HT Frequency
+#define EXTENDED_NODE_ID            0x160
+#define ECS_HT_TRANS_CTRL           0x168
+#define ECS_HT_TRANS_CTRL_CPU2_EN   0x00000001  // [0] = CPU2 Enable
+#define ECS_HT_TRANS_CTRL_CPU3_EN   0x00000002  // [1] = CPU3 Enable
+#define ECS_HT_TRANS_CTRL_CPU4_EN   0x00000004  // [2] = CPU4 Enable
+#define ECS_HT_TRANS_CTRL_CPU5_EN   0x00000008  // [3] = CPU5 Enable
+
+#define CORE_CTRL                   0x1DC
+#define CORE_CTRL_CORE1_EN          0x00000002
+#define CORE_CTRL_CORE2_EN          0x00000004
+#define CORE_CTRL_CORE3_EN          0x00000008
+#define CORE_CTRL_CORE4_EN          0x00000010
+#define CORE_CTRL_CORE5_EN          0x00000020
+#define CORE_CTRL_CORE6_EN          0x00000040
+#define CORE_CTRL_CORE7_EN          0x00000080
+#define CORE_CTRL_CORE8_EN          0x00000100
+#define CORE_CTRL_CORE9_EN          0x00000200
+
+// FUNC_3 registers
+// ----------------
+#define HARDWARE_THERMAL_CTRL_REG       0x64
+#define SOFTWARE_THERMAL_CTRL_REG       0x68
+
+#define ACPI_PSC_0_REG                  0x80    // ACPI Power State Control Registers
+#define ACPI_PSC_4_REG                  0x84
+
+#define NB_CFG_HIGH_REG                 0x8C
+#define POWER_CTRL_MISCELLANEOUS_REG    0xA0
+#define CLOCK_POWER_TIMING_CTRL2_REG    0xDC
+#define NORTH_BRIDGE_CAPABILITIES_REG   0xE8
+#define MULTI_NODE_CPU                  29
+#define CPUID_FMR                       0xFC    // Family / Model registers
+#define DOWNCORE_CTRL                   0x190   // Downcore Control Register
+
+#define LINK_TO_XCS_TOKEN_COUNT_REG_3X148 0x148
+#define REG_HT4_PHY_OFFSET_BASE_4X180    0x180
+#define REG_HT4_PHY_DATA_PORT_BASE_4X184 0x184
+
+#define HTPHY_OFFSET_MASK         0xE00001FF
+#define HTPHY_WRITE_CMD           0x40000000
+#define HTPHY_IS_COMPLETE_MASK    0x80000000
+#define HTPHY_DIRECT_MAP          0x20000000
+#define HTPHY_DIRECT_OFFSET_MASK  0x6000FFFF
+
+// FUNC_5 registers
+// ----------------
+#define COMPUTE_UNIT_STATUS       0x80
+#define NORTH_BRIDGE_CAPABILITIES_2_REG  0x84
+
+
+// Misc. defines.
+#define PCI_DEV_BASE    24
+
+#define CPU_STEPPING    0x0000000F
+#define CPU_MODEL       0x000000F0
+#define CPU_EMODEL      0x000F0000
+#define CPU_EFAMILY     0x00F00000
+#define CPU_FMS_MASK    CPU_EFAMILY | CPU_EMODEL | CPU_MODEL | CPU_STEPPING
+
+#define HTPHY_SELECT        2
+#define PCI_SELECT          1
+#define MSR_SELECT          0
+
+#define LOGICAL_ID      1
+#define F_SCHEME        0
+#define DR_SCHEME       1
+#define GR_SCHEME       2
+
+#define DR_NO_STRING        0
+#define DR_SOCKET_C32       5
+#define DR_SOCKET_ASB2      4
+#define DR_SOCKET_G34       3
+#define DR_SOCKET_S1G3      2
+#define DR_SOCKET_S1G4      2
+#define DR_SOCKET_AM3       1
+#define DR_SOCKET_1207      0
+#define LN_SOCKET_FM1       2
+#define LN_SOCKET_FS1       1
+#define LN_SOCKET_FP1       0
+#define ON_SOCKET_FT1       0
+#define KR_SOCKET_FT2       0
+#define OR_SOCKET_AM3       1
+#define OR_SOCKET_G34       3
+#define OR_SOCKET_C32       5
+#define TN_SOCKET_FP2       0
+#define TN_SOCKET_FS1       1
+#define TN_SOCKET_FM2       2
+#define KM_SOCKET_FM2       2
+#define KM_SOCKET_G2012     3
+#define KM_SOCKET_C2012     5
+#define SOCKET_IGNORE       0xF
+
+#define LAPIC_BASE_ADDR_MASK    0x0000FFFFFFFFF000
+#define APIC_EXT_BRDCST_MASK    0x000E0000
+#define APIC_ENABLE_BIT         0x00000800
+#define LOCAL_APIC_ADDR         0xFEE00000
+#define INT_CMD_REG_LO          0x300
+#define INT_CMD_REG_HI          0x310
+#define REMOTE_MSG_REG          0x380
+#define REMOTE_READ_REG         0xC0
+#define APIC_ID_REG             0x20
+#define APIC20_ApicId           24
+#define CMD_REG_TO_READ_DATA    0x338
+
+#define MAX_CORE_ID_SIZE 8
+#define MAX_CORE_ID_MASK ((1 << MAX_CORE_ID_SIZE) - 1)
+
+/*-------------------------
+ * Default definitions
+ *-------------------------
+ */
+#define DOWNCORE_MASK_SINGLE    0xFFFFFFFE
+#define DOWNCORE_MASK_DUAL      0xFFFFFFFC
+#define DOWNCORE_MASK_TRI       0xFFFFFFF8
+#define DOWNCORE_MASK_FOUR      0xFFFFFFF0
+#define DOWNCORE_MASK_FIVE      0xFFFFFFE0
+#define DOWNCORE_MASK_SIX       0xFFFFFFC0
+#define DOWNCORE_MASK_DUAL_COMPUTE_UNIT  0xFFFFFFFA
+#define DOWNCORE_MASK_TRI_COMPUTE_UNIT   0xFFFFFFEA
+#define DOWNCORE_MASK_FOUR_COMPUTE_UNIT  0xFFFFFFAA
+
+#define DELIVERY_STATUS             BIT13
+#define REMOTE_READ_STAT_MASK       0x00030000
+#define REMOTE_DELIVERY_PENDING     0x00010000
+#define REMOTE_DELIVERY_DONE        0x00020000
+
+/*
+ * --------------------------------------------------------------------------------------
+ *
+ *             D E F I N E S    /   T Y P E D E F S   /  S T R U C T U R E S
+ *
+ * --------------------------------------------------------------------------------------
+ */
+
+/// CpuEarly param type
+typedef struct {
+  IN       UINT8                  MemInitPState;        ///< Pstate value during memory initial
+  IN       PLATFORM_CONFIGURATION PlatformConfig;       ///< Runtime configurable user options
+} AMD_CPU_EARLY_PARAMS;
+
+/// Enum - Will be used to access each structure
+///        related to each CPU family
+typedef enum {
+  REVF,                                       ///< NPT, RevF
+  REVG,                                       ///< NPT, RevG
+  DEERHOUND,                                  ///< Family 10h, Deerhound
+  GRIFFIN                                     ///< Family 11h, Griffin
+} CPU_FAMILY;
+
+/// CPUID
+typedef enum {
+  REG_EAX,                                    ///< EAX
+  REG_EBX,                                    ///< EBX
+  REG_ECX,                                    ///< ECX
+  REG_EDX                                     ///< EDX
+} CPUID_REG;
+
+#endif      // _CPU_REGISTERS_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuServices.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuServices.h
new file mode 100644
index 0000000000..c12b4cd739
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuServices.h
@@ -0,0 +1,334 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Services
+ *
+ * Related to the General Services API's, but for the CPU component.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 53202 $   @e \$Date: 2011-05-16 20:04:04 -0600 (Mon, 16 May 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_SERVICES_H_
+#define _CPU_SERVICES_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+ /// WARM RESET STATE_BITS
+#define WR_STATE_COLD  00
+#define WR_STATE_RESET 01
+#define WR_STATE_EARLY 02
+#define WR_STATE_POST  03
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * The role of primary core for each compute unit can be relative to the cores' launch order.
+ *
+ * One core of a compute unit is always given the role as primary.  In different feature algorithms
+ * the core performing the primary core role can be designated relative to compute order.  In most cases,
+ * the primary core is the first core of a compute unit to execute.  However, in some cases the primary core
+ * role is associated with the last core to execute.
+ *
+ * If the launch order is strictly ascending, then first core is the lowest number and last core is highest.
+ * But if the launch order is not ascending, the first and last core follow the launch order, not the numbering order.
+ *
+ * Note that for compute units with only one core (AllCoresMapping), that core is primary for both orderings.
+ * (This includes processors without hardware compute units.)
+ *
+ */
+typedef enum {
+  FirstCoreIsComputeUnitPrimary,                   ///< the primary core role associates with the first core.
+  LastCoreIsComputeUnitPrimary,                    ///< the primary core role associates with the last core.
+  MaxComputeUnitPrimarySelector,                   ///< limit check.
+} COMPUTE_UNIT_PRIMARY_SELECTOR;
+
+/**
+ * The supported Core to Compute unit mappings.
+ */
+typedef enum {
+  AllCoresMapping,                            ///< All Cores are primary cores
+  EvenCoresMapping,                           ///< Compute units are even/odd core pairs.
+  BitMapMapping,                              ///< Currently not supported by any family, arbitrary core
+                                              ///< to compute unit mapping.
+  MaxComputeUnitMapping                       ///< Not a mapping, use for limit check.
+} COMPUTE_UNIT_MAPPING;
+
+/**
+ * Core Pair Map entry.
+ * Provide for interpreting the core pairing for the processor's compute units.
+ *
+ * HT_LIST_TERMINAL as an Enabled value means the end of a list of map structs.
+ * Zero as an Enabled value implies Compute Units are not supported by the processor
+ * and the mapping is assumed to be AllCoresMapping.
+ *
+ */
+typedef struct {
+  UINT8 Enabled;                              ///< The value of the Enabled Compute Units
+  UINT8 DualCore;                             ///< The value of the Dual Core Compute Units
+  COMPUTE_UNIT_MAPPING Mapping;               ///< When the processor module matches these values, use this mapping method.
+} CORE_PAIR_MAP;
+
+//----------------------------------------------------------------------------
+//                         CPU SYSTEM INFO TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// SYSTEM INFO
+typedef struct _SYSTEM_INFO {
+  UINT32            TotalNumberOfSockets;               ///< Total Number of Sockets
+  UINT32            TotalNumberOfCores;                 ///< Total Number Of Cores
+  UINT32            CurrentSocketNum;                   ///< Current Socket Number
+  UINT32            CurrentCoreNum;                     ///< Current Core Number
+  UINT32            CurrentCoreApicId;                  ///< Current Core Apic ID
+  UINT32            CurrentLogicalCpuId;                ///< Current Logical CPU ID
+} SYSTEM_INFO;
+
+/// WARM_RESET_REQUEST
+typedef struct _WARM_RESET_REQUEST {
+  UINT8             RequestBit:1;                       ///< Request Bit
+  UINT8             StateBits:2;                        ///< State Bits
+  UINT8             PostStage:2;                        ///< Post Stage
+  UINT8             Reserved:(8-5);                     ///< Reserved
+} WARM_RESET_REQUEST;
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GetCurrentNodeNum (
+     OUT   UINT32 *Node,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * Get the current Platform's number of Sockets, regardless of how many are populated.
+ *
+ */
+UINT32
+GetPlatformNumberOfSockets ( VOID );
+
+/**
+ * Get the number of Modules to check presence in each Processor.
+ *
+ */
+UINT32
+GetPlatformNumberOfModules ( VOID );
+
+BOOLEAN
+IsProcessorPresent (
+  IN       UINT32            Socket,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * For a specific Node, get its Socket and Module ids.
+ *
+ */
+BOOLEAN
+GetSocketModuleOfNode (
+  IN       UINT32    Node,
+     OUT   UINT32    *Socket,
+     OUT   UINT32    *Module,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * Get the current core's Processor APIC Index.
+ */
+UINT32
+GetProcessorApicIndex (
+  IN       UINT32            Node,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * Provide the number of installed processors (not Nodes! and not Sockets!)
+ */
+UINT32
+GetNumberOfProcessors (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+GetActiveCoresInCurrentSocket (
+     OUT   UINT32 *CoreCount,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+GetActiveCoresInGivenSocket (
+  IN       UINT32             Socket,
+     OUT   UINT32             *CoreCount,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINTN
+GetActiveCoresInCurrentModule (
+  IN       AMD_CONFIG_PARAMS  *StdHeader
+  );
+
+UINTN
+GetNumberOfCompUnitsInCurrentModule (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+GetGivenModuleCoreRange (
+  IN       UINT32            Socket,
+  IN       UINT32            Module,
+     OUT   UINT32            *LowCore,
+     OUT   UINT32            *HighCore,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+GetCurrentCore (
+     OUT   UINT32 *Core,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+GetCurrentNodeAndCore (
+     OUT   UINT32 *Node,
+     OUT   UINT32 *Core,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+BOOLEAN
+IsCurrentCorePrimary (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+GetApMailbox (
+     OUT   UINT32               *ApMailboxInfo,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+VOID
+CacheApMailbox (
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+UINTN
+GetSystemDegree (
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+BOOLEAN
+GetNodeId (
+  IN       UINT32  SocketId,
+  IN       UINT32  ModuleId,
+     OUT   UINT8   *NodeId,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+VOID
+WaitMicroseconds (
+  IN       UINT32 Microseconds,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/**
+ * Get the compute unit mapping algorithm.
+ */
+COMPUTE_UNIT_MAPPING
+GetComputeUnitMapping (
+  IN      AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+/**
+ * Does the current core have the role of primary core for the compute unit?
+ */
+BOOLEAN
+IsCorePairPrimary (
+  IN       COMPUTE_UNIT_PRIMARY_SELECTOR Selector,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+/**
+ * Are the two specified cores shared in a compute unit?
+ */
+BOOLEAN
+AreCoresPaired (
+  IN       UINT32  Socket,
+  IN       UINT32  Module,
+  IN       UINT32  CoreA,
+  IN       UINT32  CoreB,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+SetWarmResetFlag (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       WARM_RESET_REQUEST *Request
+  );
+
+VOID
+GetWarmResetFlag (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+     OUT   WARM_RESET_REQUEST *Request
+  );
+
+BOOLEAN
+IsWarmReset (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+CheckBistStatus (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+SetWarmResetAtEarly (
+  IN      UINT32            Data,
+  IN      AMD_CONFIG_PARAMS *StdHeader
+);
+
+#endif  // _CPU_SERVICES_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuWarmReset.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuWarmReset.c
new file mode 100644
index 0000000000..28d11fff3c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/cpuWarmReset.c
@@ -0,0 +1,235 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Warm Reset Implementation.
+ *
+ * Implement Warm Reset Interface.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                            M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_CPUWARMRESET_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *    This function will set the CPU register warm reset bits.
+ *
+ *    Note: This function will be called by UEFI BIOS's
+ *    The UEFI wrapper code should register this function, to be called back later point
+ *    in time, before the wrapper code does warm reset.
+ *
+ *    @param[in] StdHeader Config handle for library and services
+ *    @param[in] Request   Indicate warm reset status
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+SetWarmResetFlag (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       WARM_RESET_REQUEST *Request
+  )
+{
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  FamilySpecificServices = NULL;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->SetWarmResetFlag (FamilySpecificServices, StdHeader, Request);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *    This function will get the CPU register warm reset bits.
+ *
+ *    Note: This function will be called by UEFI BIOS's
+ *    The UEFI wrapper code should register this function, to be called back later point
+ *    in time, before the wrapper code does warm reset.
+ *
+ *    @param[in] StdHeader Config handle for library and services
+ *    @param[out] Request   Indicate warm reset status
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+GetWarmResetFlag (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+     OUT   WARM_RESET_REQUEST *Request
+  )
+{
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  FamilySpecificServices = NULL;
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->GetWarmResetFlag (FamilySpecificServices, StdHeader, Request);
+
+  switch (StdHeader->Func) {
+  case AMD_INIT_RESET:
+    Request->PostStage = (UINT8) WR_STATE_RESET;
+    break;
+  case AMD_INIT_EARLY:
+    Request->PostStage = (UINT8) WR_STATE_EARLY;
+    break;
+  case AMD_INIT_POST:
+    // Fall through to default case
+  default:
+    Request->PostStage = (UINT8) WR_STATE_POST;
+    break;
+  }
+}
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S - (AGESA ONLY)
+ *----------------------------------------------------------------------------------------
+ */
+
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is this boot a warm reset?
+ *
+ * This function reads the CPU register warm reset bit that is preserved after a warm reset.
+ * Which in fact gets set before issuing warm reset.  We just use the BSP's register always.
+ *
+ * @param[in]       StdHeader       Config handle for library and services
+ *
+ * @retval      TRUE            Warm Reset
+ * @retval      FALSE           Not Warm Reset
+ *
+ */
+BOOLEAN
+IsWarmReset (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 PostStage;
+  WARM_RESET_REQUEST Request;
+  BOOLEAN  WarmReset;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  FamilySpecificServices = NULL;
+
+  switch (StdHeader->Func) {
+  case AMD_INIT_RESET:
+    PostStage = WR_STATE_RESET;
+    break;
+  case AMD_INIT_EARLY:
+    PostStage = WR_STATE_EARLY;
+    break;
+  case AMD_INIT_POST:
+  default:
+    PostStage = WR_STATE_POST;
+    break;
+  }
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->GetWarmResetFlag (FamilySpecificServices, StdHeader, &Request);
+
+  if (Request.StateBits >= PostStage) {
+    WarmReset = TRUE;
+  } else {
+    WarmReset = FALSE;
+  }
+
+  return WarmReset;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *    This function will set the CPU register warm reset bits at AmdInitEarly if it is
+ *    currently in cold boot. To request for a warm reset, set the RequestBit to TRUE
+ *    and the StateBits to (current poststage - 1)
+ *
+ *    @param[in] Data      The table data value (unused in this routine)
+ *    @param[in] StdHeader Config handle for library and services
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+SetWarmResetAtEarly (
+  IN       UINT32            Data,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  WARM_RESET_REQUEST Request;
+
+  if (!IsWarmReset (StdHeader)) {
+    GetWarmResetFlag (StdHeader, &Request);
+
+    Request.RequestBit = TRUE;
+    Request.StateBits = (Request.PostStage - 1);
+
+    SetWarmResetFlag (StdHeader, &Request);
+  }
+}
+
+/*----------------------------------------------------------------------------------------
+ *                            L O C A L    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/heapManager.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/heapManager.c
new file mode 100644
index 0000000000..a02a6a2e37
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/heapManager.c
@@ -0,0 +1,885 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Heap Manager and Heap Allocation APIs, and related functions.
+ *
+ * Contains code that initialize, maintain, and allocate the heap space.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 56322 $   @e \$Date: 2011-07-11 16:51:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "cpuCacheInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_HEAPMANAGER_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT64
+STATIC
+HeapGetCurrentBase (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+DeleteFreeSpaceNode (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT32            OffsetOfDeletedNode
+  );
+
+VOID
+STATIC
+InsertFreeSpaceNode (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT32            OffsetOfInsertNode
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          P U B L I C     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  This function initializes the heap for each CPU core.
+ *
+ *  Check for already initialized.  If not, determine offset of local heap in CAS and
+ *  setup initial heap markers and bookkeeping status.  Initialize a couple heap items
+ *  all cores need, for convenience.  Currently these are caching the AP mailbox info and
+ *  an initial event log.
+ *
+ *  @param[in]  StdHeader          Handle of Header for calling lib functions and services.
+ *
+ *  @retval     AGESA_SUCCESS      This core's heap is initialized
+ *  @retval     AGESA_FATAL        This core's heap cannot be initialized due to any reasons below:
+ *                                 - current processor family cannot be identified.
+ *
+ */
+AGESA_STATUS
+HeapManagerInit (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  // First Time Initialization
+  // Note: First 16 bytes of buffer is reserved for Heap Manager use
+  UINT16                HeapAlreadyInitSizeDword;
+  UINT32                HeapAlreadyRead;
+  UINT8                 L2LineSize;
+  UINT8                 *HeapBufferPtr;
+  UINT8                 *HeapInitPtr;
+  UINT32                *HeapDataPtr;
+  UINT64                MsrData;
+  UINT64                MsrMask;
+  UINT8                 Ignored;
+  CPUID_DATA            CpuId;
+  BUFFER_NODE           *FreeSpaceNode;
+  CACHE_INFO            *CacheInfoPtr;
+  AGESA_STATUS          IgnoredSts;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  CPU_LOGICAL_ID        CpuFamilyRevision;
+
+  // Check whether this is a known processor family.
+  GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+  if ((CpuFamilyRevision.Family == 0) && (CpuFamilyRevision.Revision == 0)) {
+    IDS_ERROR_TRAP;
+    return AGESA_FATAL;
+  }
+
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &Ignored, StdHeader);
+  HeapBufferPtr = (UINT8 *) StdHeader->HeapBasePtr;
+
+  // Check whether the heap manager is already initialized
+  LibAmdMsrRead (AMD_MTRR_VARIABLE_HEAP_MASK, &MsrData, StdHeader);
+  if (MsrData == (CacheInfoPtr->VariableMtrrMask & AMD_HEAP_MTRR_MASK)) {
+    LibAmdMsrRead (AMD_MTRR_VARIABLE_HEAP_BASE, &MsrData, StdHeader);
+    if ((MsrData & CacheInfoPtr->HeapBaseMask) == ((UINT64) HeapBufferPtr & CacheInfoPtr->HeapBaseMask)) {
+      if (((HEAP_MANAGER *) HeapBufferPtr)->Signature == HEAP_SIGNATURE_VALID) {
+        // This is not a bug, there are multiple premem basic entry points,
+        // and each will call heap init to make sure create struct will succeed.
+        // If that is later deemed a problem, there needs to be a reasonable test
+        // for the calling code to make to determine if it needs to init heap or not.
+        // In the mean time, add this to the event log
+        PutEventLog (AGESA_SUCCESS,
+                    CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED,
+                    0, 0, 0, 0, StdHeader);
+        return AGESA_SUCCESS;
+      }
+    }
+  }
+
+  // Set variable MTRR base and mask
+  MsrData = ((UINT64) HeapBufferPtr & CacheInfoPtr->HeapBaseMask);
+  MsrMask = CacheInfoPtr->VariableMtrrHeapMask & AMD_HEAP_MTRR_MASK;
+
+  MsrData |= 0x06;
+  LibAmdMsrWrite (AMD_MTRR_VARIABLE_HEAP_BASE, &MsrData, StdHeader);
+  LibAmdMsrWrite (AMD_MTRR_VARIABLE_HEAP_MASK, &MsrMask, StdHeader);
+
+  // Set top of memory to a temp value
+  MsrData = (UINT64) (AMD_TEMP_TOM);
+  LibAmdMsrWrite (TOP_MEM, &MsrData, StdHeader);
+
+  // Enable variable MTTRs
+  LibAmdMsrRead (SYS_CFG, &MsrData, StdHeader);
+  MsrData |= AMD_VAR_MTRR_ENABLE_BIT;
+  LibAmdMsrWrite (SYS_CFG, &MsrData, StdHeader);
+
+  // Initialize Heap Space
+  // BIOS may store to a line only after it has been allocated by a load
+  LibAmdCpuidRead (AMD_CPUID_L2L3Cache_L2TLB, &CpuId, StdHeader);
+  L2LineSize = (UINT8) (CpuId.ECX_Reg);
+  HeapInitPtr = HeapBufferPtr ;
+  for (HeapAlreadyRead = 0; HeapAlreadyRead < AMD_HEAP_SIZE_PER_CORE;
+      (HeapAlreadyRead = HeapAlreadyRead + L2LineSize)) {
+    Ignored = *HeapInitPtr;
+    HeapInitPtr += L2LineSize;
+  }
+
+  HeapDataPtr = (UINT32 *) HeapBufferPtr;
+  for (HeapAlreadyInitSizeDword = 0; HeapAlreadyInitSizeDword < AMD_HEAP_SIZE_DWORD_PER_CORE; HeapAlreadyInitSizeDword++) {
+    *HeapDataPtr = 0;
+    HeapDataPtr++;
+  }
+
+  // Note: We are reserving the first 16 bytes for Heap Manager use
+  // UsedSize indicates the size of heap spaced is used for HEAP_MANAGER, BUFFER_NODE,
+  //   Pad for 16-byte alignment, buffer data, and IDS SENTINEL.
+  // FirstActiveBufferOffset is initalized as invalid heap offset, AMD_HEAP_INVALID_HEAP_OFFSET.
+  // FirstFreeSpaceOffset is initalized as the byte right after HEAP_MANAGER header.
+  // Then we set Signature of HEAP_MANAGER header as valid, HEAP_SIGNATURE_VALID.
+  ((HEAP_MANAGER*) HeapBufferPtr)->UsedSize = sizeof (HEAP_MANAGER);
+  ((HEAP_MANAGER*) HeapBufferPtr)->FirstActiveBufferOffset = AMD_HEAP_INVALID_HEAP_OFFSET;
+  ((HEAP_MANAGER*) HeapBufferPtr)->FirstFreeSpaceOffset = sizeof (HEAP_MANAGER);
+  ((HEAP_MANAGER*) HeapBufferPtr)->Signature = HEAP_SIGNATURE_VALID;
+  // Create free space link
+  FreeSpaceNode = (BUFFER_NODE *) (HeapBufferPtr + sizeof (HEAP_MANAGER));
+  FreeSpaceNode->BufferSize = AMD_HEAP_SIZE_PER_CORE - sizeof (HEAP_MANAGER) - sizeof (BUFFER_NODE);
+  FreeSpaceNode->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+
+  StdHeader->HeapStatus = HEAP_LOCAL_CACHE;
+  if (!IsBsp (StdHeader, &IgnoredSts)) {
+    // The BSP's hardware mailbox has not been initialized, so only APs
+    // can do this at this point.
+    CacheApMailbox (StdHeader);
+  }
+  EventLogInitialization (StdHeader);
+  return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Allocates space for a new buffer in the heap
+ *
+ * This function will allocate new buffer either by using internal 'AGESA' heapmanager
+ * or by using externa (IBV) heapmanager. This function will also determine if whether or not
+ * there is enough space for the new structure. If so, it will zero out the buffer,
+ * and return a pointer to the region.
+ *
+ * @param[in,out]  AllocateHeapParams structure pointer containing the size of the
+ *                                   desired new region, its handle, and the
+ *                                   return pointer.
+ * @param[in,out]  StdHeader         Config handle for library and services.
+ *
+ * @retval         AGESA_SUCCESS     No error
+ * @retval         AGESA_BOUNDS_CHK  Handle already exists, or not enough
+ *                                   free space
+ * @retval         AGESA_UNSUPPORTED Do not support this kind of heap allocation
+ * @retval         AGESA_ERROR       Heap is invaild
+ *
+ */
+AGESA_STATUS
+HeapAllocateBuffer (
+  IN OUT   ALLOCATE_HEAP_PARAMS *AllocateHeapParams,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 *BaseAddress;
+  UINT8  AlignTo16Byte;
+  UINT8  CalloutFcnData;
+  UINT32 RemainSize;
+  UINT32 OffsetOfSplitNode;
+  UINT32 OffsetOfNode;
+  HEAP_MANAGER *HeapManager;
+  BUFFER_NODE *FreeSpaceNode;
+  BUFFER_NODE *SplitFreeSpaceNode;
+  BUFFER_NODE *CurrentBufferNode;
+  BUFFER_NODE *NewBufferNode;
+  AGESA_BUFFER_PARAMS  AgesaBuffer;
+
+  ASSERT (StdHeader != NULL);
+  if (AllocateHeapParams->Persist == HEAP_RUNTIME_SYSTEM_MEM) {
+    ASSERT (StdHeader->HeapStatus == HEAP_SYSTEM_MEM);
+    if (StdHeader->HeapStatus != HEAP_SYSTEM_MEM) {
+      return AGESA_UNSUPPORTED;
+    }
+  }
+
+  // At this stage we will decide to either use external (IBV) heap manger
+  // or internal (AGESA) heap manager.
+
+  // If (HeapStatus == HEAP_SYSTEM_MEM), then use the call function to call
+  // external heap manager
+  if (StdHeader->HeapStatus == HEAP_SYSTEM_MEM) {
+    AgesaBuffer.StdHeader = *StdHeader;
+    AgesaBuffer.BufferHandle = AllocateHeapParams->BufferHandle;
+    AgesaBuffer.BufferLength = AllocateHeapParams->RequestedBufferSize;
+
+    if (AllocateHeapParams->Persist == HEAP_RUNTIME_SYSTEM_MEM) {
+      CalloutFcnData = HEAP_CALLOUT_RUNTIME;
+    } else {
+      CalloutFcnData = HEAP_CALLOUT_BOOTTIME;
+    }
+    AGESA_TESTPOINT (TpIfBeforeAllocateHeapBuffer, StdHeader);
+    if (AgesaAllocateBuffer (CalloutFcnData, &AgesaBuffer) != AGESA_SUCCESS) {
+      AllocateHeapParams->BufferPtr = NULL;
+      return AGESA_ERROR;
+    }
+    AGESA_TESTPOINT (TpIfAfterAllocateHeapBuffer, StdHeader);
+
+    AllocateHeapParams->BufferPtr = (UINT8 *) (AgesaBuffer.BufferPointer);
+    return AGESA_SUCCESS;
+  }
+
+  // If (StdHeader->HeapStatus != HEAP_SYSTEM_MEM), then allocated buffer
+  // using following AGESA Heap Manager code.
+
+  // Buffer pointer is NULL unless we return a buffer.
+  AlignTo16Byte = 0;
+  AllocateHeapParams->BufferPtr = NULL;
+  AllocateHeapParams->RequestedBufferSize += NUM_OF_SENTINEL * SIZE_OF_SENTINEL;
+
+  // Get base address
+  BaseAddress = (UINT8 *) StdHeader->HeapBasePtr;
+  HeapManager = (HEAP_MANAGER *) BaseAddress;
+
+  // Check Heap database is valid
+  if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+    // The base address in StdHeader is incorrect, get base address by itself
+    BaseAddress = (UINT8 *) HeapGetBaseAddress (StdHeader);
+    HeapManager = (HEAP_MANAGER *) BaseAddress;
+    if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+      // Heap is not available, ASSERT here
+      ASSERT (FALSE);
+      return AGESA_ERROR;
+    }
+    StdHeader->HeapBasePtr = (UINT64) BaseAddress;
+  }
+
+  // Allocate
+  CurrentBufferNode = (BUFFER_NODE *) (BaseAddress + sizeof (HEAP_MANAGER));
+  // If there already has been a heap with the incoming BufferHandle, we return AGESA_BOUNDS_CHK.
+  if (HeapManager->FirstActiveBufferOffset != AMD_HEAP_INVALID_HEAP_OFFSET) {
+    CurrentBufferNode = (BUFFER_NODE *) (BaseAddress + HeapManager->FirstActiveBufferOffset);
+    while (CurrentBufferNode->OffsetOfNextNode != AMD_HEAP_INVALID_HEAP_OFFSET) {
+      if (CurrentBufferNode->BufferHandle == AllocateHeapParams->BufferHandle) {
+      PutEventLog (AGESA_BOUNDS_CHK,
+                   CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED,
+                   AllocateHeapParams->BufferHandle, 0, 0, 0, StdHeader);
+        return AGESA_BOUNDS_CHK;
+      } else {
+        CurrentBufferNode = (BUFFER_NODE *) (BaseAddress + CurrentBufferNode->OffsetOfNextNode);
+      }
+    }
+    if (CurrentBufferNode->BufferHandle == AllocateHeapParams->BufferHandle) {
+      PutEventLog (AGESA_BOUNDS_CHK,
+                   CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED,
+                   AllocateHeapParams->BufferHandle, 0, 0, 0, StdHeader);
+      return AGESA_BOUNDS_CHK;
+    }
+  }
+
+  // Find the buffer size that first matches the requested buffer size (i.e. the first free buffer of greater size).
+  OffsetOfNode = HeapManager->FirstFreeSpaceOffset;
+  FreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfNode);
+  while (OffsetOfNode != AMD_HEAP_INVALID_HEAP_OFFSET) {
+    AlignTo16Byte = (UINT8) ((0x10 - (((UINTN) (VOID *) FreeSpaceNode + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL) & 0xF)) & 0xF);
+    AllocateHeapParams->RequestedBufferSize = (UINT32) (AllocateHeapParams->RequestedBufferSize + AlignTo16Byte);
+    if (FreeSpaceNode->BufferSize >= AllocateHeapParams->RequestedBufferSize) {
+      break;
+    }
+    AllocateHeapParams->RequestedBufferSize = (UINT32) (AllocateHeapParams->RequestedBufferSize - AlignTo16Byte);
+    OffsetOfNode = FreeSpaceNode->OffsetOfNextNode;
+    FreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfNode);
+  }
+  if (OffsetOfNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+    // We don't find any free space buffer that matches the requested buffer size.
+    PutEventLog (AGESA_BOUNDS_CHK,
+                 CPU_ERROR_HEAP_IS_FULL,
+                 AllocateHeapParams->BufferHandle, 0, 0, 0, StdHeader);
+    return AGESA_BOUNDS_CHK;
+  } else {
+    // We find one matched free space buffer.
+    DeleteFreeSpaceNode (StdHeader, OffsetOfNode);
+    NewBufferNode = FreeSpaceNode;
+    // Add new buffer node to the buffer chain
+    if (HeapManager->FirstActiveBufferOffset == AMD_HEAP_INVALID_HEAP_OFFSET) {
+      HeapManager->FirstActiveBufferOffset = sizeof (HEAP_MANAGER);
+    } else {
+      CurrentBufferNode->OffsetOfNextNode = OffsetOfNode;
+    }
+    // New buffer size
+    RemainSize = FreeSpaceNode->BufferSize - AllocateHeapParams->RequestedBufferSize;
+    if (RemainSize > sizeof (BUFFER_NODE)) {
+      NewBufferNode->BufferSize = AllocateHeapParams->RequestedBufferSize;
+      OffsetOfSplitNode = OffsetOfNode + sizeof (BUFFER_NODE) + NewBufferNode->BufferSize;
+      SplitFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfSplitNode);
+      SplitFreeSpaceNode->BufferSize = RemainSize - sizeof (BUFFER_NODE);
+      InsertFreeSpaceNode (StdHeader, OffsetOfSplitNode);
+    } else {
+      // Remain size is less than BUFFER_NODE, we use whole size instead of requested size.
+      NewBufferNode->BufferSize = FreeSpaceNode->BufferSize;
+    }
+  }
+
+  // Initialize BUFFER_NODE structure of NewBufferNode
+  NewBufferNode->BufferHandle = AllocateHeapParams->BufferHandle;
+  if ((AllocateHeapParams->Persist == HEAP_TEMP_MEM) || (AllocateHeapParams->Persist == HEAP_SYSTEM_MEM)) {
+    NewBufferNode->Persist = AllocateHeapParams->Persist;
+  } else {
+    NewBufferNode->Persist = HEAP_LOCAL_CACHE;
+  }
+  NewBufferNode->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+  NewBufferNode->PadSize = AlignTo16Byte;
+
+  // Clear to 0x00
+  LibAmdMemFill ((VOID *) ((UINT8 *) NewBufferNode + sizeof (BUFFER_NODE)), 0x00, NewBufferNode->BufferSize, StdHeader);
+
+  // Debug feature
+  SET_SENTINEL_BEFORE (NewBufferNode, AlignTo16Byte);
+  SET_SENTINEL_AFTER (NewBufferNode);
+
+  // Update global variables
+  HeapManager->UsedSize += NewBufferNode->BufferSize + sizeof (BUFFER_NODE);
+
+  // Now fill in the incoming structure
+  AllocateHeapParams->BufferPtr = (UINT8 *) ((UINT8 *) NewBufferNode + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL + AlignTo16Byte);
+  AllocateHeapParams->RequestedBufferSize -= (NUM_OF_SENTINEL * SIZE_OF_SENTINEL + AlignTo16Byte);
+
+  return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Deallocates a previously allocated buffer in the heap
+ *
+ * This function will deallocate buffer either by using internal 'AGESA' heapmanager
+ * or by using externa (IBV) heapmanager.
+ *
+ * @param[in]      BufferHandle      Handle of the buffer to free.
+ * @param[in]      StdHeader         Config handle for library and services.
+ *
+ * @retval         AGESA_SUCCESS     No error
+ * @retval         AGESA_BOUNDS_CHK  Handle does not exist on the heap
+ *
+ */
+AGESA_STATUS
+HeapDeallocateBuffer (
+  IN       UINT32 BufferHandle,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 *BaseAddress;
+  UINT32 NodeSize;
+  UINT32 OffsetOfFreeSpaceNode;
+  UINT32 OffsetOfPreviousNode;
+  UINT32 OffsetOfCurrentNode;
+  BOOLEAN HeapLocateFlag;
+  HEAP_MANAGER *HeapManager;
+  BUFFER_NODE *CurrentNode;
+  BUFFER_NODE *PreviousNode;
+  BUFFER_NODE *FreeSpaceNode;
+  AGESA_BUFFER_PARAMS  AgesaBuffer;
+
+  ASSERT (StdHeader != NULL);
+
+  HeapLocateFlag = TRUE;
+  BaseAddress = (UINT8 *) StdHeader->HeapBasePtr;
+  HeapManager = (HEAP_MANAGER *) BaseAddress;
+
+  // Check Heap database is valid
+  if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+    // The base address in StdHeader is incorrect, get base address by itself
+    BaseAddress = (UINT8 *) HeapGetBaseAddress (StdHeader);
+    HeapManager = (HEAP_MANAGER *) BaseAddress;
+    if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+      // Heap is not available, ASSERT here
+      ASSERT (FALSE);
+      return AGESA_ERROR;
+    }
+    StdHeader->HeapBasePtr = (UINT64) BaseAddress;
+  }
+
+  OffsetOfPreviousNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+  OffsetOfCurrentNode =  HeapManager->FirstActiveBufferOffset;
+  CurrentNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+
+  // Locate heap
+  if ((BaseAddress != NULL) && (HeapManager->Signature == HEAP_SIGNATURE_VALID)) {
+    if (OffsetOfCurrentNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+      HeapLocateFlag = FALSE;
+    } else {
+      while (CurrentNode->BufferHandle != BufferHandle) {
+        if (CurrentNode->OffsetOfNextNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+          HeapLocateFlag = FALSE;
+          break;
+        } else {
+          OffsetOfPreviousNode = OffsetOfCurrentNode;
+          OffsetOfCurrentNode = CurrentNode->OffsetOfNextNode;
+          CurrentNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+        }
+      }
+    }
+  } else {
+    HeapLocateFlag = FALSE;
+  }
+
+  if (HeapLocateFlag == TRUE) {
+    // CurrentNode points to the buffer which wanted to be deallocated.
+    // Remove deallocated heap from active buffer chain.
+    if (OffsetOfPreviousNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+      HeapManager->FirstActiveBufferOffset = CurrentNode->OffsetOfNextNode;
+    } else {
+      PreviousNode = (BUFFER_NODE *) (BaseAddress + OffsetOfPreviousNode);
+      PreviousNode->OffsetOfNextNode = CurrentNode->OffsetOfNextNode;
+    }
+    // Now, CurrentNode become a free space node.
+    HeapManager->UsedSize -= CurrentNode->BufferSize + sizeof (BUFFER_NODE);
+    // Loop free space chain to see if any free space node is just before/after CurrentNode, then merge them.
+    OffsetOfFreeSpaceNode = HeapManager->FirstFreeSpaceOffset;
+    FreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfFreeSpaceNode);
+    while (OffsetOfFreeSpaceNode != AMD_HEAP_INVALID_HEAP_OFFSET) {
+      if ((OffsetOfFreeSpaceNode + sizeof (BUFFER_NODE) + FreeSpaceNode->BufferSize) == OffsetOfCurrentNode) {
+        DeleteFreeSpaceNode (StdHeader, OffsetOfFreeSpaceNode);
+        NodeSize = FreeSpaceNode->BufferSize + CurrentNode->BufferSize + sizeof (BUFFER_NODE);
+        OffsetOfCurrentNode = OffsetOfFreeSpaceNode;
+        CurrentNode = FreeSpaceNode;
+        CurrentNode->BufferSize = NodeSize;
+      } else if (OffsetOfFreeSpaceNode == (OffsetOfCurrentNode + sizeof (BUFFER_NODE) + CurrentNode->BufferSize)) {
+        DeleteFreeSpaceNode (StdHeader, OffsetOfFreeSpaceNode);
+        NodeSize = FreeSpaceNode->BufferSize + CurrentNode->BufferSize + sizeof (BUFFER_NODE);
+        CurrentNode->BufferSize = NodeSize;
+      }
+      OffsetOfFreeSpaceNode = FreeSpaceNode->OffsetOfNextNode;
+      FreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfFreeSpaceNode);
+    }
+    InsertFreeSpaceNode (StdHeader, OffsetOfCurrentNode);
+    return AGESA_SUCCESS;
+  } else {
+    // If HeapStatus == HEAP_SYSTEM_MEM, try callout function
+    if (StdHeader->HeapStatus == HEAP_SYSTEM_MEM) {
+      AgesaBuffer.StdHeader = *StdHeader;
+      AgesaBuffer.BufferHandle = BufferHandle;
+
+      AGESA_TESTPOINT (TpIfBeforeDeallocateHeapBuffer, StdHeader);
+      if (AgesaDeallocateBuffer (0, &AgesaBuffer) != AGESA_SUCCESS) {
+        return AGESA_ERROR;
+      }
+      AGESA_TESTPOINT (TpIfAfterDeallocateHeapBuffer, StdHeader);
+
+      return AGESA_SUCCESS;
+    }
+    // If we are still unable to locate the buffer handle, return AGESA_BOUNDS_CHK
+    if ((BaseAddress != NULL) && (HeapManager->Signature == HEAP_SIGNATURE_VALID)) {
+      PutEventLog (AGESA_BOUNDS_CHK,
+                 CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT,
+                 BufferHandle, 0, 0, 0, StdHeader);
+    } else {
+      ASSERT (FALSE);
+    }
+    return AGESA_BOUNDS_CHK;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Locates a previously allocated buffer on the heap.
+ *
+ * This function searches the heap for a buffer with the desired handle, and
+ * returns a pointer to the buffer.
+ *
+ * @param[in,out]  LocateHeap     Structure containing the buffer's handle,
+ *                                   and the return pointer.
+ * @param[in]      StdHeader         Config handle for library and services.
+ *
+ * @retval         AGESA_SUCCESS     No error
+ * @retval         AGESA_BOUNDS_CHK  Handle does not exist on the heap
+ *
+ */
+AGESA_STATUS
+HeapLocateBuffer (
+  IN OUT   LOCATE_HEAP_PTR *LocateHeap,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 *BaseAddress;
+  UINT8  AlignTo16Byte;
+  UINT32 OffsetOfCurrentNode;
+  BOOLEAN HeapLocateFlag;
+  HEAP_MANAGER *HeapManager;
+  BUFFER_NODE *CurrentNode;
+  AGESA_BUFFER_PARAMS  AgesaBuffer;
+
+  ASSERT (StdHeader != NULL);
+
+  HeapLocateFlag = TRUE;
+  BaseAddress = (UINT8 *) StdHeader->HeapBasePtr;
+  HeapManager = (HEAP_MANAGER *) BaseAddress;
+
+  // Check Heap database is valid
+  if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+    // The base address in StdHeader is incorrect, get base address by itself
+    BaseAddress = (UINT8 *) HeapGetBaseAddress (StdHeader);
+    HeapManager = (HEAP_MANAGER *) BaseAddress;
+    if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+      // Heap is not available, ASSERT here
+      ASSERT (FALSE);
+      return AGESA_ERROR;
+    }
+    StdHeader->HeapBasePtr = (UINT64) BaseAddress;
+  }
+  OffsetOfCurrentNode =  HeapManager->FirstActiveBufferOffset;
+  CurrentNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+
+  // Find buffer using internal heap manager
+  // Locate the heap using handle = LocateHeap-> BufferHandle
+  // If HeapStatus != HEAP_SYSTEM_ MEM
+  if ((BaseAddress != NULL) && (HeapManager->Signature == HEAP_SIGNATURE_VALID)) {
+    if (OffsetOfCurrentNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+      HeapLocateFlag = FALSE;
+    } else {
+      while (CurrentNode->BufferHandle != LocateHeap->BufferHandle) {
+        if (CurrentNode->OffsetOfNextNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+          HeapLocateFlag = FALSE;
+          break;
+        } else {
+          OffsetOfCurrentNode = CurrentNode->OffsetOfNextNode;
+          CurrentNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+        }
+      }
+    }
+  } else {
+    HeapLocateFlag = FALSE;
+  }
+
+  if (HeapLocateFlag) {
+    AlignTo16Byte = CurrentNode->PadSize;
+    LocateHeap->BufferPtr = (UINT8 *) ((UINT8 *) CurrentNode + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL + AlignTo16Byte);
+    LocateHeap->BufferSize = CurrentNode->BufferSize - NUM_OF_SENTINEL * SIZE_OF_SENTINEL - AlignTo16Byte;
+    return AGESA_SUCCESS;
+  } else {
+    // If HeapStatus == HEAP_SYSTEM_MEM, try callout function
+    if (StdHeader->HeapStatus == HEAP_SYSTEM_MEM) {
+      AgesaBuffer.StdHeader = *StdHeader;
+      AgesaBuffer.BufferHandle = LocateHeap->BufferHandle;
+
+      AGESA_TESTPOINT (TpIfBeforeLocateHeapBuffer, StdHeader);
+      if (AgesaLocateBuffer (0, &AgesaBuffer) != AGESA_SUCCESS) {
+        LocateHeap->BufferPtr = NULL;
+        return AGESA_ERROR;
+      }
+      LocateHeap->BufferSize = AgesaBuffer.BufferLength;
+      AGESA_TESTPOINT (TpIfAfterLocateHeapBuffer, StdHeader);
+
+      LocateHeap->BufferPtr = (UINT8 *) (AgesaBuffer.BufferPointer);
+      return AGESA_SUCCESS;
+    }
+
+    // If we are still unable to deallocate the buffer handle, return AGESA_BOUNDS_CHK
+    LocateHeap->BufferPtr = NULL;
+    LocateHeap->BufferSize = 0;
+    if ((BaseAddress != NULL) && (HeapManager->Signature == HEAP_SIGNATURE_VALID)) {
+      PutEventLog (AGESA_BOUNDS_CHK,
+                   CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT,
+                   LocateHeap->BufferHandle, 0, 0, 0, StdHeader);
+    } else {
+      ASSERT (FALSE);
+    }
+    return AGESA_BOUNDS_CHK;
+  }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the heap base address
+ *
+ * This function will try to locate heap from cache, temp memory, main memory.
+ * The heap signature will be checked for validity on each possible location.
+ * Firstly, try if heap base is in cache by calling the function HeapGetCurrentBase.
+ * Secondly, try if heap base is temp memory by UserOptoions.CfgHeapDramAddress.
+ * Thirdly, try if heap base is in main memory by doing a buffer locate with buffer handle
+ * AMD_HEAP_IN_MAIN_MEMORY_HANDLE.
+ * If no valid heap signature is found in each possible location above, a NULL pointer is returned.
+ *
+ * @param[in]      StdHeader      Config handle for library and services.
+ *
+ * @return         Heap base address of the executing core's heap.
+ *
+ */
+UINT64
+HeapGetBaseAddress (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT64 BaseAddress;
+  HEAP_MANAGER *HeapManager;
+  AGESA_BUFFER_PARAMS AgesaBuffer;
+
+  // Firstly, we try to see if heap is in cache
+  BaseAddress = HeapGetCurrentBase (StdHeader);
+  HeapManager = (HEAP_MANAGER *) BaseAddress;
+
+  if ((HeapManager->Signature != HEAP_SIGNATURE_VALID) &&
+      (StdHeader->HeapStatus != HEAP_DO_NOT_EXIST_YET) &&
+      (StdHeader->HeapStatus != HEAP_LOCAL_CACHE)) {
+    // Secondly, we try to see if heap is in temp memory
+    BaseAddress = UserOptions.CfgHeapDramAddress;
+    HeapManager = (HEAP_MANAGER *) BaseAddress;
+    if (HeapManager->Signature != HEAP_SIGNATURE_VALID) {
+      // Thirdly, we try to see if heap in main memory
+      // by locating with external buffer manager (IBV)
+      AgesaBuffer.StdHeader = *StdHeader;
+      AgesaBuffer.BufferHandle = AMD_HEAP_IN_MAIN_MEMORY_HANDLE;
+      if (AgesaLocateBuffer (0, &AgesaBuffer) == AGESA_SUCCESS) {
+        BaseAddress = (UINT64) AgesaBuffer.BufferPointer;
+        HeapManager = (HEAP_MANAGER *) BaseAddress;
+        if (HeapManager->Signature != HEAP_SIGNATURE_VALID) {
+          // No valid heap signature ever found, return a NULL pointer
+          BaseAddress = 0;
+        }
+      } else {
+        // No heap buffer is allocated by external manager (IBV), return a NULL pointer
+        BaseAddress = 0;
+      }
+    }
+  }
+
+  return BaseAddress;
+}
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  DeleteFreeSpaceNode
+ *
+ *  Description:
+ *    Delete a free space node from free space chain
+ *
+ *  Parameters:
+ * @param[in]      StdHeader             Config handle for library and services.
+ * @param[in]      OffsetOfDeletedNode   Offset of deleted node.
+ *
+ *  Processing:
+ *
+ */
+VOID
+STATIC
+DeleteFreeSpaceNode (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT32            OffsetOfDeletedNode
+  )
+{
+  UINT8 *BaseAddress;
+  UINT32 OffsetOfPreviousNode;
+  UINT32 OffsetOfCurrentNode;
+  HEAP_MANAGER *HeapManager;
+  BUFFER_NODE *CurrentFreeSpaceNode;
+  BUFFER_NODE *PreviousFreeSpaceNode;
+
+
+  BaseAddress = (UINT8 *) StdHeader->HeapBasePtr;
+  HeapManager = (HEAP_MANAGER *) BaseAddress;
+
+  OffsetOfPreviousNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+  OffsetOfCurrentNode = HeapManager->FirstFreeSpaceOffset;
+  //
+  // After AmdInitEnv, there is no free space provided for HeapAllocateBuffer.
+  // Hence if the FirstFreeSpaceOffset is AMD_HEAP_INVALID_HEAP_OFFSET, then
+  // no need to do more on delete node.
+  //
+  if (OffsetOfCurrentNode != AMD_HEAP_INVALID_HEAP_OFFSET) {
+    CurrentFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+    while ((OffsetOfCurrentNode != AMD_HEAP_INVALID_HEAP_OFFSET) && (OffsetOfCurrentNode != OffsetOfDeletedNode)) {
+      OffsetOfPreviousNode = OffsetOfCurrentNode;
+      OffsetOfCurrentNode = CurrentFreeSpaceNode->OffsetOfNextNode;
+      CurrentFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+    }
+    if (OffsetOfCurrentNode != AMD_HEAP_INVALID_HEAP_OFFSET) {
+      if (OffsetOfPreviousNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+        HeapManager->FirstFreeSpaceOffset = CurrentFreeSpaceNode->OffsetOfNextNode;
+      } else {
+        PreviousFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfPreviousNode);
+        PreviousFreeSpaceNode->OffsetOfNextNode = CurrentFreeSpaceNode->OffsetOfNextNode;
+      }
+    }
+  }
+  return;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  InsertFreeSpaceNode
+ *
+ *  Description:
+ *    Insert a free space node to free space chain, size order
+ *
+ *  Parameters:
+ * @param[in]      StdHeader             Config handle for library and services.
+ * @param[in]      OffsetOfInsertNode    Offset of inserted node.
+ *
+ *  Processing:
+ *
+ */
+VOID
+STATIC
+InsertFreeSpaceNode (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN       UINT32            OffsetOfInsertNode
+  )
+{
+  UINT8 *BaseAddress;
+  UINT32 OffsetOfPreviousNode;
+  UINT32 OffsetOfCurrentNode;
+  HEAP_MANAGER *HeapManager;
+  BUFFER_NODE *CurrentFreeSpaceNode;
+  BUFFER_NODE *PreviousFreeSpaceNode;
+  BUFFER_NODE *InsertedFreeSpaceNode;
+
+  BaseAddress = (UINT8 *) StdHeader->HeapBasePtr;
+  HeapManager = (HEAP_MANAGER *) BaseAddress;
+
+  OffsetOfPreviousNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+  OffsetOfCurrentNode = HeapManager->FirstFreeSpaceOffset;
+  CurrentFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+  InsertedFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfInsertNode);
+  while ((OffsetOfCurrentNode != AMD_HEAP_INVALID_HEAP_OFFSET) &&
+         (CurrentFreeSpaceNode->BufferSize < InsertedFreeSpaceNode->BufferSize)) {
+    OffsetOfPreviousNode = OffsetOfCurrentNode;
+    OffsetOfCurrentNode = CurrentFreeSpaceNode->OffsetOfNextNode;
+    CurrentFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+  }
+  InsertedFreeSpaceNode->OffsetOfNextNode = OffsetOfCurrentNode;
+  if (OffsetOfPreviousNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+    HeapManager->FirstFreeSpaceOffset = OffsetOfInsertNode;
+  } else {
+    PreviousFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfPreviousNode);
+    PreviousFreeSpaceNode->OffsetOfNextNode = OffsetOfInsertNode;
+  }
+  return;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determines the base address of the executing core's heap.
+ *
+ * This function uses the executing core's socket/core numbers to determine
+ * where it's heap should be located.
+ *
+ * @param[in]      StdHeader      Config handle for library and services.
+ *
+ * @return         A pointer to the executing core's heap.
+ *
+ */
+UINT64
+STATIC
+HeapGetCurrentBase (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT32      SystemCoreNumber;
+  UINT64      ReturnPtr;
+  AGESA_STATUS          IgnoredStatus;
+  CPU_SPECIFIC_SERVICES *FamilyServices;
+
+  if (IsBsp (StdHeader, &IgnoredStatus)) {
+    ReturnPtr = AMD_HEAP_START_ADDRESS;
+  } else {
+    GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+    ASSERT (FamilyServices != NULL);
+
+    SystemCoreNumber = FamilyServices->GetApCoreNumber (FamilyServices, StdHeader);
+    ASSERT (SystemCoreNumber != 0);
+    ASSERT (SystemCoreNumber < 64);
+    ReturnPtr = ((SystemCoreNumber * AMD_HEAP_SIZE_PER_CORE) + AMD_HEAP_START_ADDRESS);
+  }
+  ASSERT (ReturnPtr <= ((AMD_HEAP_REGION_END_ADDRESS + 1) - AMD_HEAP_SIZE_PER_CORE));
+  return ReturnPtr;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/heapManager.h b/src/vendorcode/amd/agesa/f15/Proc/CPU/heapManager.h
new file mode 100644
index 0000000000..f933dee0e0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/heapManager.h
@@ -0,0 +1,243 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Heap Manager and Heap Allocation APIs, and related functions.
+ *
+ * Contains code that initialize, maintain, and allocate the heap space.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  CPU
+ * @e \$Revision: 55372 $   @e \$Date: 2011-06-20 17:22:54 -0600 (Mon, 20 Jun 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _HEAP_MANAGER_H_
+#define _HEAP_MANAGER_H_
+
+/*---------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+#define AMD_MTRR_VARIABLE_BASE0 0x200
+#define AMD_MTRR_VARIABLE_HEAP_BASE 0x20A
+#define AMD_MTRR_VARIABLE_HEAP_MASK (AMD_MTRR_VARIABLE_HEAP_BASE + 1)
+
+#define AMD_HEAP_START_ADDRESS  0x400000
+#define AMD_HEAP_REGION_END_ADDRESS 0xBFFFFF
+#define AMD_HEAP_SIZE_PER_CORE  0x010000
+#define AMD_HEAP_INVALID_HEAP_OFFSET 0xFFFFFFFF
+#define AMD_HEAP_MTRR_MASK ((0xFFFFFFFFFFFFF800ull & ((AMD_HEAP_SIZE_PER_CORE ^ (-1)) + 1)) | 0x800)
+#define AMD_HEAP_SIZE_DWORD_PER_CORE  (AMD_HEAP_SIZE_PER_CORE / 4)
+
+#define AMD_TEMP_TOM            0x20000000  // Set TOM to 512 MB (temporary value)
+#define AMD_VAR_MTRR_ENABLE_BIT 0x100000    // bit 20
+
+#define AMD_HEAP_RAM_ADDRESS    0xB0000
+
+#define HEAP_SIGNATURE_VALID    0x50414548 // Signature: 'HEAP'
+#define HEAP_SIGNATURE_INVALID  0x00000000 // Signature cleared
+
+///Heap Manager Life cycle
+#define HEAP_DO_NOT_EXIST_YET        1
+#define HEAP_LOCAL_CACHE             2
+#define HEAP_TEMP_MEM                3
+#define HEAP_SYSTEM_MEM              4
+#define HEAP_DO_NOT_EXIST_ANYMORE    5
+#define HEAP_S3_RESUME               6
+#define HEAP_RUNTIME_SYSTEM_MEM      7
+
+///Heap callout
+#define HEAP_CALLOUT_BOOTTIME        0
+#define HEAP_CALLOUT_RUNTIME         1
+
+#define AMD_MTRR_FIX64k_00000    0x250
+#define AMD_MTRR_FIX16k_80000    0x258
+#define AMD_MTRR_FIX16k_A0000    0x259
+#define AMD_MTRR_FIX4k_C0000     0x268
+#define AMD_MTRR_FIX4k_C8000     0x269
+#define AMD_MTRR_FIX4k_D0000     0x26A
+#define AMD_MTRR_FIX4k_D8000     0x26B
+#define AMD_MTRR_FIX4k_E0000     0x26C
+#define AMD_MTRR_FIX4k_E8000     0x26D
+#define AMD_MTRR_FIX4k_F0000     0x26E
+#define AMD_MTRR_FIX4k_F8000     0x26F
+
+#define AMD_MTRR_FIX64K_WB_DRAM  0x1E
+#define AMD_MTRR_FIX64K_WT_DRAM  0x1C
+#define AMD_MTRR_FIX64K_UC_DRAM  0x18
+#define AMD_MTRR_FIX16K_WB_DRAM  0x1E1E1E1E1E1E1E1E
+#define AMD_MTRR_FIX16K_WT_DRAM  0x1C1C1C1C1C1C1C1C
+#define AMD_MTRR_FIX16K_UC_DRAM  0x1818181818181818
+#define AMD_MTRR_FIX4K_WB_DRAM   0x1E1E1E1E1E1E1E1E
+#define AMD_MTRR_FIX4K_WT_DRAM   0x1C1C1C1C1C1C1C1C
+#define AMD_MTRR_FIX4K_UC_DRAM   0x1818181818181818
+
+/*---------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// Allocate Heap Parameters
+typedef struct _ALLOCATE_HEAP_PARAMS {
+  UINT32  RequestedBufferSize;                    ///< Size of buffer.
+  UINT32  BufferHandle;                           ///< An unique ID of buffer.
+  UINT8   Persist;                                ///< A flag. If marked, to be stored and passed to AmdInitLate.
+  UINT8   *BufferPtr;                             ///< Pointer to buffer.
+} ALLOCATE_HEAP_PARAMS;
+
+/// Locate Heap Parameters
+typedef struct _LOCATE_HEAP_PTR {
+  UINT32  BufferHandle;                           ///< An unique ID of buffer.
+  UINT32 BufferSize;                              ///< Data buffer size.
+  UINT8   *BufferPtr;                             ///< Pointer to buffer.
+} LOCATE_HEAP_PTR;
+
+/// Heap Node Header
+typedef struct _BUFFER_NODE {
+  UINT32        BufferHandle;                     ///< An unique ID of buffer.
+  UINT32        BufferSize;                       ///< Size of buffer.
+  UINT8         Persist;                          ///< A flag. If marked, to be stored and passed to AmdInitLate.
+  UINT8         PadSize;                          ///< Size of pad.
+  UINT32        OffsetOfNextNode;                 ///< Offset of next node (relative to the base).
+} BUFFER_NODE;
+
+/// Heap Manager
+typedef struct _HEAP_MANAGER {
+  UINT32 Signature;                               ///< a signature to indicate if the heap is valid.
+  UINT32 UsedSize;                                ///< Used size of heap.
+  UINT32 FirstActiveBufferOffset;                 ///< Offset of the first active buffer.
+  UINT32 FirstFreeSpaceOffset;                    ///< Offset of the first free space.
+} HEAP_MANAGER;
+
+/// AGESA Buffer Handles (These are reserved)
+typedef enum {
+  AMD_INIT_RESET_HANDLE = 0x000A000,              ///< Assign 0x000A000 buffer handle to AmdInitReset routine.
+  AMD_INIT_EARLY_HANDLE,                          ///< Assign 0x000A001 buffer handle to AmdInitEarly routine.
+  AMD_INIT_POST_HANDLE,                           ///< Assign 0x000A002 buffer handle to AmdInitPost routine.
+  AMD_INIT_ENV_HANDLE,                            ///< Assign 0x000A003 buffer handle to AmdInitEnv routine.
+  AMD_INIT_MID_HANDLE,                            ///< Assign 0x000A004 buffer handle to AmdInitMid routine.
+  AMD_INIT_LATE_HANDLE,                           ///< Assign 0x000A005 buffer handle to AmdInitLate routine.
+  AMD_INIT_RESUME_HANDLE,                         ///< Assign 0x000A006 buffer handle to AmdInitResume routine.
+  AMD_LATE_RUN_AP_TASK_HANDLE,                    ///< Assign 0x000A007 buffer handle to AmdLateRunApTask routine.
+  AMD_S3_SAVE_HANDLE,                             ///< Assign 0x000A008 buffer handle to AmdS3Save routine.
+  AMD_S3_LATE_RESTORE_HANDLE,                     ///< Assign 0x000A009 buffer handle to AmdS3LateRestore routine.
+  AMD_S3_SCRIPT_SAVE_TABLE_HANDLE,                ///< Assign 0x000A00A buffer handle to be used for S3 save table
+  AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE,               ///< Assign 0x000A00B buffer handle to be used for S3 save table
+  AMD_CPU_AP_TASKING_HANDLE,                      ///< Assign 0x000A00C buffer handle to AP tasking input parameters.
+  AMD_REC_MEM_SOCKET_HANDLE,                      ///< Assign 0x000A00D buffer handle to save socket with memory in memory recovery mode.
+  AMD_MEM_AUTO_HANDLE,                            ///< Assign 0x000A00E buffer handle to AmdMemAuto routine.
+  AMD_MEM_SPD_HANDLE,                             ///< Assign 0x000A00F buffer handle to AmdMemSpd routine.
+  AMD_MEM_DATA_HANDLE,                            ///< Assign 0x000A010 buffer handle to MemData
+  AMD_MEM_TRAIN_BUFFER_HANDLE,                    ///< Assign 0x000A011 buffer handle to allocate buffer for training
+  AMD_MEM_S3_DATA_HANDLE,                         ///< Assign 0x000A012 buffer handle to special case register for S3
+  AMD_MEM_S3_NB_HANDLE,                           ///< Assign 0x000A013 buffer handle to NB block for S3
+  AMD_MEM_S3_MR0_DATA_HANDLE,                     ///< Assign 0x000A014 buffer handle to MR0 data block for S3
+  AMD_UMA_INFO_HANDLE,                            ///< Assign 0x000A015 buffer handle to be used for Uma information
+  AMD_DMI_MEM_DEV_INFO_HANDLE,                    ///< Assign 0x000A016 buffer handle to DMI Type16 17 19 20 information
+  HT_STATE_DATA_HANDLE,                           ///< Assign 0x000A017 buffer handle to HT State Data
+  PRESERVE_MAIL_BOX_HANDLE,                       ///< Assign 0x000A018 buffer handle for Preserve Mailbox Feature.
+  EVENT_LOG_BUFFER_HANDLE,                        ///< Assign 0x000A019 buffer handle to Event Log
+  IDS_CONTROL_HANDLE,                             ///< Assign 0x000A01A buffer handle to AmdIds routine.
+  IDS_HT_DATA_HANDLE,                             ///< Assign 0x000A01B buffer handle to Ht IDS control
+  IDS_HDT_OUT_BUFFER_HANDLE,                      ///< Assign 0x000A01C buffer handle to be used for HDTOUT support.
+  IDS_CHECK_POINT_PERF_HANDLE,                    ///< Assign 0x000A01D buffer handle to Performance analysis
+  AMD_PCIE_COMPLEX_DATA_HANDLE,                   ///< Assign 0x000A01F buffer handle to be used for PCIe support
+  AMD_GNB_SMU_CONFIG_HANDLE,                      ///< Assign 0x000A020 buffer handle to be used for GNB SMU configuration
+  AMD_PP_FUSE_TABLE_HANDLE,                       ///< Assign 0x000A021 buffer handle to be used for TT fuse table
+  AMD_GFX_PLATFORM_CONFIG_HANDLE,                 ///< Assign 0x000A022 buffer handle to be used for Gfx platform configuration
+  AMD_GNB_TEMP_DATA_HANDLE,                       ///< Assign 0x000A024 buffer handle for GNB general purpose data block
+  AMD_MEM____RDQS_HANDLE,                         ///< Assign 0x000A025 buffer handle for training
+  AMD_GNB_IOMMU_SCRATCH_MEM_HANDLE,               ///< Assign 0x000A026 buffer handle to be used for GNB IOMMU scratch memory
+  AMD_MEM_MISC_HANDLES_START = 0x1000000,         ///< Reserve 0x1000000 to 0x1FFFFFF buffer handle
+  AMD_MEM_MISC_HANDLES_END = 0x1FFFFFF,           ///< miscellaneous memory init tasks' buffers.
+  AMD_HEAP_IN_MAIN_MEMORY_HANDLE = 0x8000000,     ///< Assign 0x8000000 to AMD_HEAP_IN_MAIN_MEMORY_HANDLE.
+  SOCKET_DIE_MAP_HANDLE = 0x534F4B54,             ///< 'sokt'
+  NODE_ID_MAP_HANDLE = 0x4E4F4445,                ///< 'node'
+  HOP_COUNT_TABLE_HANDLE = 0x484F5053,            ///< 'hops'
+  LOCAL_AP_MAIL_BOX_CACHE_HANDLE = 0x414D4258,    ///< 'ambx'
+  AMD_FCH_RESET_DATA_BLOCK_HANDLE = 0x46434852,   ///< 'FCHR' Buffer handle for FCH private data block at InitReset
+  AMD_FCH_DATA_BLOCK_HANDLE = 0x46434845,         ///< 'FCHE' Buffer handle for FCH private data block at InitEnv
+  IDS_REG_TABLE_HANDLE = 0x49524547,              ///< 'IREG' Handle for IDS register table
+  IDS_SAVE_IDTR_HANDLE = 0x49445452,              ///< 'IDTR'
+  IDS_BSC_IDT_HANDLE = 0x42534349,                ///< 'BSCI' BSC Idt table
+  IDS_NV_TO_CMOS_HANDLE = 0x534D4349,             ///< 'ICMS' Handle for IDS CMOS save
+  IDS_GRA_HANDLE = 0x41524749,                    ///< 'IGRA' Handle for IDS GRA save
+  IDS_EXTEND_HANDLE = 0x54584549                  ///< 'IEXT' Handle for IDS extend module
+} AGESA_BUFFER_HANDLE;
+
+
+/*---------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+HeapManagerInit (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+HeapAllocateBuffer (
+  IN OUT   ALLOCATE_HEAP_PARAMS *AllocateHeapParams,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+HeapDeallocateBuffer (
+  IN       UINT32 BufferHandle,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+HeapLocateBuffer (
+  IN OUT   LOCATE_HEAP_PTR *LocateHeap,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT64
+HeapGetBaseAddress (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+EventLogInitialization (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+#endif // _HEAP_MANAGER_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdFch.h b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdFch.h
new file mode 100644
index 0000000000..7583e9a84c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdFch.h
@@ -0,0 +1,66 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD FCH Component
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:     AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 34897 $   @e \$Date: 2010-07-13 19:07:10 -0700 (Tue, 13 Jul 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _AMD_FCH_H_
+#define _AMD_FCH_H_
+
+typedef AGESA_STATUS FCH_INIT (IN VOID *DataPtr);
+typedef VOID FCH_TASK_ENTRY (IN VOID *FchCfg);
+
+
+/// FCH API build options
+typedef struct {
+  FCH_INIT        *InitReset;                   ///< InitReset
+  FCH_INIT        *InitResetConstructor;        ///< InitResetConstructor
+  FCH_INIT        *InitEnv;                     ///< InitEnv
+  FCH_INIT        *InitEnvConstructor;          ///< InitEnvConstructor
+  FCH_INIT        *InitMid;                     ///< InitMid
+  FCH_INIT        *InitMidConstructor;          ///< InitMidConstructor
+  FCH_INIT        *InitLate;                    ///< InitLate
+  FCH_INIT        *InitLateConstructor;         ///< InitLateConstructor
+} BLDOPT_FCH_FUNCTION;
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitEarly.c b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitEarly.c
new file mode 100644
index 0000000000..090009b0ad
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitEarly.c
@@ -0,0 +1,316 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Interface
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuCacheInit.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "AdvancedApi.h"
+#include "cpuServices.h"
+#include "CommonInits.h"
+#include "GnbInterface.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_AMDINITEARLY_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+EXECUTION_CACHE_REGION InitExeCacheMap[] =
+{
+  {0x00000000, 0x00000000},
+  {0x00000000, 0x00000000},
+  {0x00000000, 0x00000000}
+};
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdEarlyPlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+AGESA_STATUS
+AllocateExecutionCacheInitializer (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initialize AmdInitEarly stage platform profile and user option input.
+ *
+ * @param[in,out]   PlatformConfig   Platform profile/build option config structure
+ * @param[in,out]   StdHeader        AMD standard header config param
+ *
+ * @retval      AGESA_SUCCESS     Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdEarlyPlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  CommonPlatformConfigInit (PlatformConfig, StdHeader);
+
+  return AGESA_SUCCESS;
+}
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that will be invoked by the wrapper to initialize the input
+ * structure for the AllocateExecutionCache.
+ *
+ * @param[in]   StdHeader         Opaque handle to standard config header
+ * @param[in]   AmdExeAddrMapPtr  Our Service interface struct
+ *
+ * @retval      AGESA_SUCCESS     Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AllocateExecutionCacheInitializer (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+  )
+{
+  UINT8 i;
+  ASSERT (AmdExeAddrMapPtr != NULL);
+
+  for (i = 0; i < MAX_CACHE_REGIONS; ++i) {
+    AmdExeAddrMapPtr[i].ExeCacheStartAddr = InitExeCacheMap[i].ExeCacheStartAddr;
+    AmdExeAddrMapPtr[i].ExeCacheSize = InitExeCacheMap[i].ExeCacheSize;
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ *  Initializer routine that will be invoked by the wrapper to initialize the input
+ *  structure for the AmdInitEarly.
+ *
+ *  @param[in]      StdHeader       AMD standard header config param.
+ *  @param[in,out]  EarlyParams     The service interface struct to initialize.
+ *
+ *  @retval         AGESA_SUCCESS   Always succeeds.
+ */
+AGESA_STATUS
+AmdInitEarlyInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_EARLY_PARAMS  *EarlyParams
+  )
+{
+  ASSERT (StdHeader != NULL);
+  ASSERT (EarlyParams != NULL);
+
+  EarlyParams->StdHeader = *StdHeader;
+
+  // We don't check any AGESA_STATUS from the called constructors, since they MUST all SUCCEED.
+  //
+
+  AllocateExecutionCacheInitializer (&EarlyParams->StdHeader, &EarlyParams->CacheRegion[0]);
+
+  AmdHtInterfaceConstructor (&EarlyParams->StdHeader, &EarlyParams->HtConfig);
+
+  AmdEarlyPlatformConfigInit (&EarlyParams->PlatformConfig, &EarlyParams->StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform initialization services required at the Early Init POST time point.
+ *
+ * Execution Cache, HyperTransport, and AP Init advanced services are performed.
+ *
+ * @param[in]     EarlyParams  The interface struct for all early services
+ *
+ * @return        The most severe AGESA_STATUS returned by any called service.
+ *
+ */
+AGESA_STATUS
+AmdInitEarly (
+  IN OUT   AMD_EARLY_PARAMS  *EarlyParams
+  )
+{
+  AGESA_STATUS  CalledAgesaStatus;
+  AGESA_STATUS  EarlyInitStatus;
+  WARM_RESET_REQUEST Request;
+  UINT8 PrevRequestBit;
+  UINT8 PrevStateBits;
+
+  AGESA_TESTPOINT (TpIfAmdInitEarlyEntry, &EarlyParams->StdHeader);
+
+  EarlyInitStatus = AGESA_SUCCESS;
+
+  // Setup ROM execution cache
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AllocateExecutionCache: Start\n");
+  CalledAgesaStatus = AllocateExecutionCache (&EarlyParams->StdHeader, &EarlyParams->CacheRegion[0]);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AllocateExecutionCache: End\n");
+  if (CalledAgesaStatus > EarlyInitStatus) {
+    EarlyInitStatus = CalledAgesaStatus;
+  }
+
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+    {
+      extern CHAR8 *BldOptDebugOutput[];
+
+      UINT8 i;
+      for (i = 0; BldOptDebugOutput[i] != NULL; i++) {
+        IDS_HDT_CONSOLE (MAIN_FLOW, "\t%s\n", BldOptDebugOutput[i]);
+      }
+    }
+  )
+
+  //
+  // WARNING: AGESA's own IDT is at heap which would be moved from one place to another
+  //          so we MUST restore IDT every time before moving heap.
+  //
+  IDS_EXCEPTION_TRAP (IDS_IDT_REPLACE_IDTR_FOR_BSC, NULL, &EarlyParams->StdHeader);
+  IDS_PERF_TIME_MEASURE (&EarlyParams->StdHeader);
+  ASSERT (EarlyParams != NULL);
+  PrevRequestBit = FALSE;
+  PrevStateBits = WR_STATE_COLD;
+  IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitEarly: Start %x \n\n", PrevStateBits);
+  // If a previously requested warm reset cannot be triggered in the
+  // current stage, store the previous state of request and reset the
+  // request struct to the current post stage
+  GetWarmResetFlag (&EarlyParams->StdHeader, &Request);
+  if (Request.RequestBit == TRUE) {
+    if (Request.StateBits >= Request.PostStage) {
+      PrevRequestBit = Request.RequestBit;
+      PrevStateBits = Request.StateBits;
+      Request.RequestBit = FALSE;
+      Request.StateBits = Request.PostStage - 1;
+      SetWarmResetFlag (&EarlyParams->StdHeader, &Request);
+    }
+  }
+
+  IDS_OPTION_HOOK (IDS_INIT_EARLY_BEFORE, EarlyParams, &EarlyParams->StdHeader);
+
+  // Full Hypertransport Initialization
+  // IMPORTANT: All AP cores call Ht Init.  HT Init handles full init for the BSC, and map init for APs.
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdHtInitialize: Start\n");
+  CalledAgesaStatus = AmdHtInitialize (&EarlyParams->StdHeader, &EarlyParams->PlatformConfig, &EarlyParams->HtConfig);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdHtInitialize: End\n");
+  if (CalledAgesaStatus > EarlyInitStatus) {
+    EarlyInitStatus = CalledAgesaStatus;
+  }
+
+  CalledAgesaStatus = GnbInitAtEarlier (EarlyParams);
+  if (CalledAgesaStatus > EarlyInitStatus) {
+    EarlyInitStatus = CalledAgesaStatus;
+  }
+
+  // AP launch
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuEarly: Start\n");
+  CalledAgesaStatus = AmdCpuEarly (&EarlyParams->StdHeader, &EarlyParams->PlatformConfig);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuEarly: End\n");
+  if (CalledAgesaStatus > EarlyInitStatus) {
+    EarlyInitStatus = CalledAgesaStatus;
+  }
+
+  // Warm Reset, should be at the end of AmdInitEarly
+  GetWarmResetFlag (&EarlyParams->StdHeader, &Request);
+  // If a warm reset is requested in the current post stage, trigger the
+  // warm reset and ignore the previous request
+  if (Request.RequestBit == TRUE) {
+    if (Request.StateBits < Request.PostStage) {
+      AgesaDoReset (WARM_RESET_WHENEVER, &EarlyParams->StdHeader);
+    }
+  } else {
+    // Otherwise, if there's a previous request, restore it
+    // so that the subsequent post stage can trigger the warm reset
+    if (PrevRequestBit == TRUE) {
+      Request.RequestBit = PrevRequestBit;
+      Request.StateBits = PrevStateBits;
+      SetWarmResetFlag (&EarlyParams->StdHeader, &Request);
+    }
+  }
+
+  CalledAgesaStatus = GnbInitAtEarly (EarlyParams);
+  if (CalledAgesaStatus > EarlyInitStatus) {
+    EarlyInitStatus = CalledAgesaStatus;
+  }
+  // Check for Cache As Ram Corruption
+  IDS_CAR_CORRUPTION_CHECK (&EarlyParams->StdHeader);
+
+  IDS_OPTION_HOOK (IDS_INIT_EARLY_AFTER, EarlyParams, &EarlyParams->StdHeader);
+  IDS_PERF_TIME_MEASURE (&EarlyParams->StdHeader);
+  AGESA_TESTPOINT (TpIfAmdInitEarlyExit, &EarlyParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitEarly: End\n\n");
+
+  // Flush out all debug contents in case warm reset is triggered after this point
+  IDS_HDT_CONSOLE_FLUSH_BUFFER (&EarlyParams->StdHeader);
+
+  return  EarlyInitStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitEnv.c b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitEnv.c
new file mode 100644
index 0000000000..4fdbda14f6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitEnv.c
@@ -0,0 +1,182 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Interface
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuEnvInit.h"
+#include "heapManager.h"
+#include "GnbInterface.h"
+#include "CommonInits.h"
+#include "AmdFch.h"
+#include "S3SaveState.h"
+#include "Filecode.h"
+#include "CreateStruct.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_AMDINITENV_FILECODE
+
+extern BLDOPT_FCH_FUNCTION  BldoptFchFunction;
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ *  Initializer routine that will be invoked by the wrapper
+ *  to initialize the input structure for the AmdInitEnv
+ *
+ *  @param[in,out]  EnvParamsPtr   Newly created interface parameters for AmdInitEnv
+ *
+ *  @retval         AGESA_SUCCESS  Always succeeds
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitEnvInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_ENV_PARAMS    *EnvParamsPtr
+  )
+{
+  ASSERT (StdHeader != NULL);
+  ASSERT (EnvParamsPtr != NULL);
+
+  EnvParamsPtr->StdHeader = *StdHeader;
+
+  CommonPlatformConfigInit (&EnvParamsPtr->PlatformConfig, &EnvParamsPtr->StdHeader);
+  BldoptFchFunction.InitEnvConstructor (EnvParamsPtr);
+  GnbInitDataStructAtEnvDef (&EnvParamsPtr->GnbEnvConfiguration, EnvParamsPtr);
+
+  return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_ENV function.
+ *
+ * This entry point is responsible for copying the heap contents from the
+ * temp RAM area to main memory.
+ *
+ * @param[in,out] EnvParams         Required input parameters for the AMD_INIT_ENV
+ *                                  entry point.
+ *
+ * @return        Aggregated status across all internal AMD env calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitEnv (
+  IN OUT   AMD_ENV_PARAMS  *EnvParams
+  )
+{
+  AGESA_STATUS  AgesaStatus;
+  AGESA_STATUS  AmdInitEnvStatus;
+
+  AGESA_TESTPOINT (TpIfAmdInitEnvEntry, &EnvParams->StdHeader);
+
+  ASSERT (EnvParams != NULL);
+  AmdInitEnvStatus = AGESA_SUCCESS;
+
+
+  //Copy Temp Ram heap content to Main Ram
+  AgesaStatus = CopyHeapToMainRamAtPost (&(EnvParams->StdHeader));
+  if (AgesaStatus > AmdInitEnvStatus) {
+    AmdInitEnvStatus = AgesaStatus;
+  }
+  EnvParams->StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+  EnvParams->StdHeader.HeapBasePtr = HeapGetBaseAddress (&EnvParams->StdHeader);
+  // Any heap allocate/deallocat/locate buffer should be used after heap is rebuild from here.
+  // After persist heaps are tansfer and rebuild, HeapLocateBuffer can start to be used in IDS hook.
+
+  //Heap have been relocated, so Debug Print need be init again to get new address
+  IDS_HDT_CONSOLE_INIT (&EnvParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "Heap transfer End\n");
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitEnv: Start\n\n");
+  IDS_OPTION_HOOK (IDS_PLATFORMCFG_OVERRIDE, &EnvParams->PlatformConfig, &(EnvParams->StdHeader));
+  IDS_OPTION_HOOK (IDS_BEFORE_PCI_INIT, EnvParams, &(EnvParams->StdHeader));
+
+  AgesaStatus = S3ScriptInit (&EnvParams->StdHeader);
+  if (AgesaStatus > AmdInitEnvStatus) {
+    AmdInitEnvStatus = AgesaStatus;
+  }
+  AgesaStatus = BldoptFchFunction.InitEnv (EnvParams);
+  AmdInitEnvStatus = (AgesaStatus > AmdInitEnvStatus) ? AgesaStatus : AmdInitEnvStatus;
+
+  AgesaStatus = GnbInitAtEnv (EnvParams);
+  if (AgesaStatus > AmdInitEnvStatus) {
+    AmdInitEnvStatus = AgesaStatus;
+  }
+
+  AGESA_TESTPOINT (TpIfAmdInitEnvExit, &EnvParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitEnv: End\n");
+  IDS_HDT_CONSOLE_FLUSH_BUFFER (&EnvParams->StdHeader);
+  return  AmdInitEnvStatus;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitLate.c b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitLate.c
new file mode 100644
index 0000000000..a62af89a13
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitLate.c
@@ -0,0 +1,296 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Interface
+ * @e \$Revision: 55552 $   @e \$Date: 2011-06-22 09:31:58 -0600 (Wed, 22 Jun 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionDmi.h"
+#include "OptionSlit.h"
+#include "cpuLateInit.h"
+#include "cpuFeatures.h"
+#include "CommonInits.h"
+#include "GnbInterface.h"
+#include "OptionPstate.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_COMMON_AMDINITLATE_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_DMI_CONFIGURATION    OptionDmiConfiguration;  // global user config record
+extern OPTION_SLIT_CONFIGURATION   OptionSlitConfiguration; // global user config record
+extern OPTION_PSTATE_LATE_CONFIGURATION OptionPstateLateConfiguration;
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdLatePlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initialize AmdInitLate stage platform profile and user option input.
+ *
+ * @param[in,out]   PlatformConfig   Platform profile/build option config structure
+ * @param[in,out]   StdHeader        AMD standard header config param
+ *
+ * @retval      AGESA_SUCCESS     Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdLatePlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  CommonPlatformConfigInit (PlatformConfig, StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ *  AmdInitLateInitializer
+ *
+ *  Initializer routine that will be invoked by the wrapper
+ *  to initialize the input structure for the AmdInitLate
+ *
+ *  @param[in, out]    IN OUT   AMD_LATE_PARAMS *LateParamsPtr
+ *
+ *  @retval         AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitLateInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_LATE_PARAMS   *LateParamsPtr
+  )
+{
+  ASSERT (StdHeader != NULL);
+  ASSERT (LateParamsPtr != NULL);
+
+  LateParamsPtr->StdHeader = *StdHeader;
+
+  AmdLatePlatformConfigInit (&LateParamsPtr->PlatformConfig, &LateParamsPtr->StdHeader);
+
+  LateParamsPtr->AcpiSlit = NULL;
+
+  LateParamsPtr->AcpiSrat = NULL;
+
+  LateParamsPtr->AcpiWheaMce = NULL;
+  LateParamsPtr->AcpiWheaCmc = NULL;
+
+  LateParamsPtr->AcpiPState = NULL;
+
+  LateParamsPtr->DmiTable = NULL;
+
+  LateParamsPtr->AcpiAlib = NULL;
+
+  LateParamsPtr->IvrsExclusionRangeList = UserOptions.CfgIvrsExclusionRangeList;
+
+  return AGESA_SUCCESS;
+}
+
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ *  AmdInitLateDestructor
+ *
+ *  Destruct routine that provide a chance if something need to be done
+ *  before the end of AmdInitLate.
+ *
+ *  @param[in]    StdHeader       The standard header.
+ *  @param[in]    LateParamsPtr   AMD init late param.
+ *
+ *  @retval         AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitLateDestructor (
+  IN   AMD_CONFIG_PARAMS *StdHeader,
+  IN   AMD_LATE_PARAMS   *LateParamsPtr
+  )
+{
+
+  ASSERT (LateParamsPtr != NULL);
+
+  (*(OptionDmiConfiguration.DmiReleaseBuffer)) (StdHeader);
+  (*(OptionSlitConfiguration.SlitReleaseBuffer)) (StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_LATE function.
+ *
+ * This entry point is responsible for creating any desired ACPI tables, providing
+ * information for DMI, and to prepare the processors for the operating system
+ * bootstrap load process.
+ *
+ * @param[in,out] LateParams     Required input parameters for the AMD_INIT_LATE
+ *                                  entry point.
+ *
+ * @return        Aggregated status across all internal AMD late calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitLate (
+  IN OUT   AMD_LATE_PARAMS *LateParams
+  )
+{
+  AGESA_STATUS  AgesaStatus;
+  AGESA_STATUS  AmdInitLateStatus;
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitLate: Start\n\n");
+  AGESA_TESTPOINT (TpIfAmdInitLateEntry, &LateParams->StdHeader);
+  IDS_PERF_TIME_MEASURE (&LateParams->StdHeader);
+
+  ASSERT (LateParams != NULL);
+  AmdInitLateStatus = AGESA_SUCCESS;
+
+  IDS_OPTION_HOOK (IDS_INIT_LATE_BEFORE, LateParams, &LateParams->StdHeader);
+
+  IDS_HDT_CONSOLE (MAIN_FLOW, "CreatSystemTable: Start\n");
+  // _PSS, XPSS, _PCT, _PSD, _PPC, _CST, _CSD Tables
+  if ((LateParams->PlatformConfig.UserOptionPState) || (IsFeatureEnabled (IoCstate, &LateParams->PlatformConfig, &LateParams->StdHeader))) {
+    AgesaStatus = ((*(OptionPstateLateConfiguration.SsdtFeature)) (&LateParams->StdHeader, &LateParams->PlatformConfig, &LateParams->AcpiPState));
+    if (AgesaStatus > AmdInitLateStatus) {
+      AmdInitLateStatus = AgesaStatus;
+    }
+  }
+
+  // SRAT Table Generation
+  if (LateParams->PlatformConfig.UserOptionSrat) {
+    AgesaStatus = CreateAcpiSrat (&LateParams->StdHeader, &LateParams->AcpiSrat);
+    if (AgesaStatus > AmdInitLateStatus) {
+      AmdInitLateStatus = AgesaStatus;
+    }
+  }
+
+  // SLIT Table Generation
+  if (LateParams->PlatformConfig.UserOptionSlit) {
+    AgesaStatus = CreateAcpiSlit (&LateParams->StdHeader, &LateParams->PlatformConfig, &LateParams->AcpiSlit);
+    if (AgesaStatus > AmdInitLateStatus) {
+      AmdInitLateStatus = AgesaStatus;
+    }
+  }
+
+  // WHEA Table Generation
+  if (LateParams->PlatformConfig.UserOptionWhea) {
+    AgesaStatus = CreateAcpiWhea (&LateParams->StdHeader, &LateParams->AcpiWheaMce, &LateParams->AcpiWheaCmc);
+    if (AgesaStatus > AmdInitLateStatus) {
+      AmdInitLateStatus = AgesaStatus;
+    }
+  }
+
+  // DMI Table Generation
+  if (LateParams->PlatformConfig.UserOptionDmi) {
+    AgesaStatus = CreateDmiRecords (&LateParams->StdHeader, &LateParams->DmiTable);
+    if (AgesaStatus > AmdInitLateStatus) {
+      AmdInitLateStatus = AgesaStatus;
+    }
+  }
+  IDS_HDT_CONSOLE (MAIN_FLOW, "CreatSystemTable: End\n");
+
+  // Cpu Features
+  IDS_HDT_CONSOLE (MAIN_FLOW, "DispatchCpuFeatures: LateStart\n");
+  AgesaStatus = DispatchCpuFeatures (CPU_FEAT_INIT_LATE_END, &LateParams->PlatformConfig, &LateParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "DispatchCpuFeatures: LateEnd\n");
+  if (AgesaStatus > AmdInitLateStatus) {
+    AmdInitLateStatus = AgesaStatus;
+  }
+
+  // It is the last function run by the AGESA CPU module and prepares the processor
+  // for the operating system bootstrap load process.
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuLate: Start\n");
+  AgesaStatus = AmdCpuLate (&LateParams->StdHeader, &LateParams->PlatformConfig);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuLate: End\n");
+  if (AgesaStatus > AmdInitLateStatus) {
+    AmdInitLateStatus = AgesaStatus;
+  }
+
+  AgesaStatus = GnbInitAtLate (LateParams);
+  if (AgesaStatus > AmdInitLateStatus) {
+    AmdInitLateStatus = AgesaStatus;
+  }
+
+  IDS_OPTION_HOOK (IDS_INIT_LATE_AFTER, LateParams, &LateParams->StdHeader);
+  IDS_PERF_TIME_MEASURE (&LateParams->StdHeader);
+  AGESA_TESTPOINT (TpIfAmdInitLateExit, &LateParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitLate: End\n\n");
+  AGESA_TESTPOINT (EndAgesaTps, &LateParams->StdHeader);
+//End Debug Print Service
+  IDS_HDT_CONSOLE_EXIT (&LateParams->StdHeader);
+  return  AmdInitLateStatus;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitMid.c b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitMid.c
new file mode 100644
index 0000000000..03620549cb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitMid.c
@@ -0,0 +1,170 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Interface
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuFeatures.h"
+#include "CommonInits.h"
+#include "GnbInterface.h"
+#include "AmdFch.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_COMMON_AMDINITMID_FILECODE
+
+extern BLDOPT_FCH_FUNCTION  BldoptFchFunction;
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ *  Initializer routine that will be invoked by the wrapper
+ *  to initialize the input structure for the AmdInitMid
+ *
+ *  @param[in,out]  MidParamsPtr   Newly created interface parameters for AmdInitMid
+ *
+ *  @retval         AGESA_SUCCESS  Always succeeds
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitMidInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_MID_PARAMS    *MidParamsPtr
+  )
+{
+  ASSERT (StdHeader != NULL);
+  ASSERT (MidParamsPtr != NULL);
+
+  MidParamsPtr->StdHeader = *StdHeader;
+  CommonPlatformConfigInit (&MidParamsPtr->PlatformConfig, &MidParamsPtr->StdHeader);
+  BldoptFchFunction.InitMidConstructor (MidParamsPtr);
+
+  return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_MID function.
+ *
+ * This entry point is responsible for performing any necessary functions needed
+ * after PCI bus enumeration and just before control is passed to the video option ROM.
+ *
+ * @param[in,out] MidParams      Required input parameters for the AMD_INIT_MID
+ *                                  entry point.
+ *
+ * @return        Aggregated status across all internal AMD mid calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitMid (
+  IN OUT   AMD_MID_PARAMS *MidParams
+  )
+{
+  AGESA_STATUS  AgesaStatus;
+  AGESA_STATUS  CalledStatus;
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitMid: Start\n\n");
+  AGESA_TESTPOINT (TpIfAmdInitMidEntry, &MidParams->StdHeader);
+  IDS_PERF_TIME_MEASURE (&MidParams->StdHeader);
+
+  AgesaStatus = AGESA_SUCCESS;
+
+  ASSERT (MidParams != NULL);
+  IDS_OPTION_HOOK (IDS_INIT_MID_BEFORE, MidParams, &MidParams->StdHeader);
+
+  IDS_HDT_CONSOLE (MAIN_FLOW, "DispatchCpuFeatures: MidStart\n");
+  CalledStatus = DispatchCpuFeatures (CPU_FEAT_INIT_MID_END, &MidParams->PlatformConfig, &MidParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "DispatchCpuFeatures: MidEnd\n");
+  if (CalledStatus > AgesaStatus) {
+    AgesaStatus = CalledStatus;
+  }
+
+  CalledStatus = BldoptFchFunction.InitMid (MidParams);
+  AgesaStatus = (CalledStatus > AgesaStatus) ? CalledStatus : AgesaStatus;
+
+  CalledStatus = GnbInitAtMid (MidParams);
+  if (CalledStatus > AgesaStatus) {
+    AgesaStatus = CalledStatus;
+  }
+
+  IDS_OPTION_HOOK (IDS_INIT_MID_AFTER, MidParams, &MidParams->StdHeader);
+
+  IDS_PERF_TIME_MEASURE (&MidParams->StdHeader);
+  AGESA_TESTPOINT (TpIfAmdInitMidExit, &MidParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitMid: End\n\n");
+  IDS_HDT_CONSOLE_FLUSH_BUFFER (&MidParams->StdHeader);
+  return AgesaStatus;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitPost.c b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitPost.c
new file mode 100644
index 0000000000..415b33dd12
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitPost.c
@@ -0,0 +1,341 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Interface
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mm.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuPostInit.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CommonInits.h"
+#include "cpuServices.h"
+#include "GnbInterface.h"
+#include "Filecode.h"
+#include "CreateStruct.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_AMDINITPOST_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdPostPlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initialize AmdInitPost stage platform profile and user option input.
+ *
+ * @param[in,out]   PlatformConfig   Platform profile/build option config structure
+ * @param[in,out]   StdHeader        AMD standard header config param
+ *
+ * @retval      AGESA_SUCCESS     Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdPostPlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  CommonPlatformConfigInit (PlatformConfig, StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ *  AmdInitPostInitializer
+ *
+ *  Initializer routine that will be invoked by the wrapper
+ *  to initialize the input structure for the AmdInitPost
+ *
+ *  @param[in, out]    IN OUT   AMD_POST_PARAMS *PostParamsPtr
+ *
+ *  @retval         AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitPostInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_POST_PARAMS   *PostParamsPtr
+  )
+{
+  AGESA_STATUS  AgesaStatus;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  ASSERT (StdHeader != NULL);
+  ASSERT (PostParamsPtr != NULL);
+
+  PostParamsPtr->StdHeader = *StdHeader;
+
+  AllocHeapParams.RequestedBufferSize = sizeof (MEM_DATA_STRUCT);
+  AllocHeapParams.BufferHandle = AMD_MEM_DATA_HANDLE;
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  AgesaStatus = HeapAllocateBuffer (&AllocHeapParams, &PostParamsPtr->StdHeader);
+
+  if (AgesaStatus == AGESA_SUCCESS) {
+    PostParamsPtr->MemConfig.MemData = (MEM_DATA_STRUCT *) AllocHeapParams.BufferPtr;
+    PostParamsPtr->MemConfig.MemData->ParameterListPtr = &(PostParamsPtr->MemConfig);
+    PostParamsPtr->MemConfig.MemData->StdHeader = PostParamsPtr->StdHeader;
+    AmdPostPlatformConfigInit (&PostParamsPtr->PlatformConfig, &PostParamsPtr->StdHeader);
+    AmdMemInitDataStructDef (PostParamsPtr->MemConfig.MemData, &PostParamsPtr->PlatformConfig);
+  }
+  return AgesaStatus;
+}
+
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ *  AmdInitPostDestructor
+ *
+ *  Destruct routine that provide a chance if something need to be done
+ *  before the end of AmdInitPost.
+ *
+ *  @param[in]    StdHeader       The standard header.
+ *  @param[in]    PostParamsPtr   AMD init post param.
+ *
+ *  @retval         AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitPostDestructor (
+  IN   AMD_CONFIG_PARAMS *StdHeader,
+  IN   AMD_POST_PARAMS   *PostParamsPtr
+  )
+{
+
+  ASSERT (PostParamsPtr != NULL);
+
+  PostParamsPtr->StdHeader = *StdHeader;
+  PostParamsPtr->MemConfig.MemData->StdHeader = *StdHeader;
+
+  //
+  // AmdMemAuto completed. Here, release heap space which is used for memory init.
+  //
+  MemAmdFinalize (PostParamsPtr->MemConfig.MemData);
+  HeapDeallocateBuffer (AMD_MEM_DATA_HANDLE, StdHeader);
+
+  //
+  // AmdCpuPost completed.
+  //
+  if (PostParamsPtr->MemConfig.SysLimit != 0) {
+    // WBINVD can only be executed when memory is available
+    FinalizeAtPost (StdHeader);
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_POST function.
+ *
+ * This entry point is responsible for initializing all system memory,
+ * gathering important data out of the pre-memory cache storage into a
+ * temporary holding buffer in main memory. After that APs will be
+ * shutdown in preparation for the host environment to take control.
+ * Note: pre-memory stack will be disabled also.
+ *
+ * @param[in,out] PostParams     Required input parameters for the AMD_INIT_POST
+ *                                  entry point.
+ *
+ * @return        Aggregated status across all internal AMD POST calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitPost (
+  IN OUT   AMD_POST_PARAMS *PostParams
+  )
+{
+  AGESA_STATUS  AgesaStatus;
+  AGESA_STATUS  AmdInitPostStatus;
+  WARM_RESET_REQUEST Request;
+  UINT8 PrevRequestBit;
+  UINT8 PrevStateBits;
+
+  AGESA_TESTPOINT (TpIfAmdInitPostEntry, &PostParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitPost: Start\n\n");
+  IDS_PERF_TIME_MEASURE (&PostParams->StdHeader);
+
+  ASSERT (PostParams != NULL);
+  AmdInitPostStatus = AGESA_SUCCESS;
+  PrevRequestBit = FALSE;
+  PrevStateBits = WR_STATE_COLD;
+
+  IDS_OPTION_HOOK (IDS_INIT_POST_BEFORE, PostParams, &PostParams->StdHeader);
+
+  // If a previously requested warm reset cannot be triggered in the
+  // current stage, store the previous state of request and reset the
+  // request struct to the current post stage
+  GetWarmResetFlag (&PostParams->StdHeader, &Request);
+  if (Request.RequestBit == TRUE) {
+    if (Request.StateBits >= Request.PostStage) {
+      PrevRequestBit = Request.RequestBit;
+      PrevStateBits = Request.StateBits;
+      Request.RequestBit = FALSE;
+      Request.StateBits = Request.PostStage - 1;
+      SetWarmResetFlag (&PostParams->StdHeader, &Request);
+    }
+  }
+
+  AgesaStatus = GnbInitAtPost (PostParams);
+  if (AgesaStatus > AmdInitPostStatus) {
+    AmdInitPostStatus = AgesaStatus;
+  }
+
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdMemAuto: Start\n");
+  AgesaStatus = AmdMemAuto (PostParams->MemConfig.MemData);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdMemAuto: End\n");
+  if (AgesaStatus > AmdInitPostStatus) {
+    AmdInitPostStatus = AgesaStatus;
+  }
+
+  if (AgesaStatus != AGESA_FATAL) {
+
+    // Check BIST status
+    AgesaStatus = CheckBistStatus (&PostParams->StdHeader);
+    if (AgesaStatus > AmdInitPostStatus) {
+      AmdInitPostStatus = AgesaStatus;
+    }
+
+    //
+    // P-State data gathered, then, Relinquish APs
+    //
+    IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuPost: Start\n");
+    AgesaStatus = AmdCpuPost (&PostParams->StdHeader, &PostParams->PlatformConfig);
+    IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuPost: End\n");
+    if (AgesaStatus > AmdInitPostStatus) {
+      AmdInitPostStatus = AgesaStatus;
+    }
+
+    // Warm Reset
+    GetWarmResetFlag (&PostParams->StdHeader, &Request);
+    // If a warm reset is requested in the current post stage, trigger the
+    // warm reset and ignore the previous request
+    if (Request.RequestBit == TRUE) {
+      if (Request.StateBits < Request.PostStage) {
+        AgesaDoReset (WARM_RESET_WHENEVER, &PostParams->StdHeader);
+      }
+    } else {
+      // Otherwise, if there's a previous request, restore it
+      // so that the subsequent post stage can trigger the warm reset
+      if (PrevRequestBit == TRUE) {
+        Request.RequestBit = PrevRequestBit;
+        Request.StateBits = PrevStateBits;
+        SetWarmResetFlag (&PostParams->StdHeader, &Request);
+      }
+    }
+
+    AgesaStatus = GnbInitAtPostAfterDram (PostParams);
+    if (AgesaStatus > AmdInitPostStatus) {
+      AmdInitPostStatus = AgesaStatus;
+    }
+
+    IDS_OPTION_HOOK (IDS_INIT_POST_AFTER, PostParams, &PostParams->StdHeader);
+
+    IDS_PERF_TIME_MEASURE (&PostParams->StdHeader);
+    AGESA_TESTPOINT (TpIfAmdInitPostExit, &PostParams->StdHeader);
+    IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitPost: End\n\n");
+    IDS_HDT_CONSOLE (MAIN_FLOW, "Heap transfer Start ...\n\n");
+
+    //For Heap will be relocate to new address in next stage, flush out  debug print buffer if needed
+    IDS_HDT_CONSOLE_FLUSH_BUFFER (&PostParams->StdHeader);
+
+    // WARNING: IDT will be moved from local cache to temp memory, so restore IDTR for BSP here
+    IDS_EXCEPTION_TRAP (IDS_IDT_RESTORE_IDTR_FOR_BSC, NULL, &PostParams->StdHeader);
+    // Copies BSP heap content to RAM, and it should be at the end of AmdInitPost
+    AgesaStatus = CopyHeapToTempRamAtPost (&(PostParams->StdHeader));
+    if (AgesaStatus > AmdInitPostStatus) {
+      AmdInitPostStatus = AgesaStatus;
+    }
+    PostParams->StdHeader.HeapStatus = HEAP_TEMP_MEM;
+  }
+  // Check for Cache As Ram Corruption
+  IDS_CAR_CORRUPTION_CHECK (&PostParams->StdHeader);
+
+  // At the end of AmdInitPost, set StateBits to POST to allow any warm reset that occurs outside
+  // of AGESA to be recognized by IsWarmReset()
+  GetWarmResetFlag (&PostParams->StdHeader, &Request);
+  Request.StateBits = Request.PostStage;
+  SetWarmResetFlag (&PostParams->StdHeader, &Request);
+
+  return  AmdInitPostStatus;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitRecovery.c b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitRecovery.c
new file mode 100644
index 0000000000..278ae20c23
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitRecovery.c
@@ -0,0 +1,169 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Common
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "mm.h"
+#include "GnbInterface.h"
+#include "cpuRecovery.h"
+#include "cpuCacheInit.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_AMDINITRECOVERY_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform initialization services required at the Early Init POST time point.
+ *
+ * Execution Cache, HyperTransport, C1e, and AP Init advanced services are performed.
+ *
+ * @param[in, out]     RecoveryParams  The interface struct for Recovery services
+ *
+ * @return        The most severe AGESA_STATUS returned by any called service.
+ *
+ */
+AGESA_STATUS
+AmdInitRecovery (
+  IN OUT   AMD_RECOVERY_PARAMS      *RecoveryParams
+  )
+{
+  AGESA_STATUS  AgesaStatus;
+  AGESA_STATUS  CalledAgesaStatus;
+
+  AGESA_TESTPOINT (TpIfAmdInitRecoveryEntry, &RecoveryParams->StdHeader);
+
+  ASSERT (RecoveryParams != NULL);
+
+  AgesaStatus = AGESA_SUCCESS;
+
+  // Setup ROM execution cache
+  CalledAgesaStatus = AllocateExecutionCache (&RecoveryParams->StdHeader, &RecoveryParams->CacheRegion[0]);
+  if (CalledAgesaStatus > AgesaStatus) {
+    AgesaStatus = CalledAgesaStatus;
+  }
+
+  CalledAgesaStatus = AmdHtInitRecovery (&RecoveryParams->StdHeader);
+  if (CalledAgesaStatus > AgesaStatus) {
+    AgesaStatus = CalledAgesaStatus;
+  }
+
+  CalledAgesaStatus = AmdCpuRecovery ((AMD_CPU_RECOVERY_PARAMS *) &RecoveryParams->StdHeader);
+  if (CalledAgesaStatus > AgesaStatus) {
+    AgesaStatus = CalledAgesaStatus;
+  }
+
+  CalledAgesaStatus = AmdMemRecovery (RecoveryParams->MemConfig.MemData);
+  if (CalledAgesaStatus > AgesaStatus) {
+    AgesaStatus = CalledAgesaStatus;
+  }
+
+  CalledAgesaStatus = AmdGnbRecovery (&RecoveryParams->StdHeader);
+  if (CalledAgesaStatus > AgesaStatus) {
+    AgesaStatus = CalledAgesaStatus;
+  }
+
+  AGESA_TESTPOINT (TpIfAmdInitRecoveryExit, &RecoveryParams->StdHeader);
+  return  AgesaStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Initialize defaults and options for Amd Init Reset.
+ *
+ * @param[in]  StdHeader              AMD standard header config param.
+ * @param[in]  AmdRecoveryParamsPtr   The Reset Init interface to initialize.
+ *
+ * @retval     AGESA_SUCCESS    Always Succeeds.
+ */
+AGESA_STATUS
+AmdInitRecoveryInitializer (
+  IN       AMD_CONFIG_PARAMS   *StdHeader,
+  IN OUT   AMD_RECOVERY_PARAMS *AmdRecoveryParamsPtr
+  )
+{
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  ASSERT (StdHeader != NULL);
+  ASSERT (AmdRecoveryParamsPtr != NULL);
+
+  AmdRecoveryParamsPtr->StdHeader = *StdHeader;
+
+  AllocHeapParams.RequestedBufferSize = sizeof (MEM_DATA_STRUCT);
+  AllocHeapParams.BufferHandle = AMD_MEM_DATA_HANDLE;
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &AmdRecoveryParamsPtr->StdHeader) == AGESA_SUCCESS) {
+    AmdRecoveryParamsPtr->MemConfig.MemData = (MEM_DATA_STRUCT *) AllocHeapParams.BufferPtr;
+    AmdRecoveryParamsPtr->MemConfig.MemData->ParameterListPtr = &(AmdRecoveryParamsPtr->MemConfig);
+    LibAmdMemCopy ((VOID *) AmdRecoveryParamsPtr->MemConfig.MemData,
+                   (VOID *) AmdRecoveryParamsPtr,
+                   (UINTN) sizeof (AmdRecoveryParamsPtr->StdHeader),
+                   &AmdRecoveryParamsPtr->StdHeader
+                  );
+    AmdMemInitDataStructDefRecovery (AmdRecoveryParamsPtr->MemConfig.MemData);
+    return AGESA_SUCCESS;
+  } else {
+    return AGESA_ERROR;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitReset.c b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitReset.c
new file mode 100644
index 0000000000..d96d21e735
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitReset.c
@@ -0,0 +1,253 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Interface
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuCacheInit.h"
+#include "cpuServices.h"
+#include "AdvancedApi.h"
+#include "GeneralServices.h"
+#include "OptionsHt.h"
+#include "AmdFch.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_AMDINITRESET_FILECODE
+
+extern BLDOPT_FCH_FUNCTION  BldoptFchFunction;
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST OPTION_HT_INIT_RESET HtOptionInitReset;
+extern BUILD_OPT_CFG UserOptions;
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitResetExecutionCacheAllocateInitializer (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+  );
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that will be invoked by the wrapper to initialize the input
+ * structure for the AllocateExecutionCache.
+ *
+ *  Parameters:
+ * @param[in]   StdHeader         Opaque handle to standard config header
+ * @param[in]   AmdExeAddrMapPtr  Our Service interface struct
+ *
+ * @retval      AGESA_SUCCESS     Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdInitResetExecutionCacheAllocateInitializer (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+  )
+{
+  ASSERT (AmdExeAddrMapPtr != NULL);
+
+  LibAmdMemFill (AmdExeAddrMapPtr, 0, sizeof (EXECUTION_CACHE_REGION) * MAX_CACHE_REGIONS, StdHeader);
+
+  return AGESA_SUCCESS;
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_RESET function.
+ *
+ * This entry point is responsible for establishing the HT links to the program
+ * ROM and for performing basic processor initialization.
+ *
+ * @param[in,out] ResetParams    Required input parameters for the AMD_INIT_RESET
+ *                                  entry point.
+ *
+ * @return        Aggregated status across all internal AMD reset calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitReset (
+  IN OUT   AMD_RESET_PARAMS *ResetParams
+  )
+{
+  AGESA_STATUS AgesaStatus;
+  AGESA_STATUS CalledAgesaStatus;
+  WARM_RESET_REQUEST Request;
+  UINT8 PrevRequestBit;
+  UINT8 PrevStateBits;
+
+  AgesaStatus = AGESA_SUCCESS;
+
+  // Setup ROM execution cache
+  CalledAgesaStatus = AllocateExecutionCache (&ResetParams->StdHeader, &ResetParams->CacheRegion[0]);
+  if (CalledAgesaStatus > AgesaStatus) {
+    AgesaStatus = CalledAgesaStatus;
+  }
+
+  IDS_EXTENDED_HOOK (IDS_INIT_RESET_BEFORE, NULL, NULL, &ResetParams->StdHeader);
+
+  // Init Debug Print function
+  IDS_HDT_CONSOLE_INIT (&ResetParams->StdHeader);
+
+  IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitReset: Start\n\n");
+
+  IDS_HDT_CONSOLE (MAIN_FLOW, "\n*** %s ***\n\n", &UserOptions.VersionString);
+
+  AGESA_TESTPOINT (TpIfAmdInitResetEntry, &ResetParams->StdHeader);
+  ASSERT (ResetParams != NULL);
+
+  PrevRequestBit = FALSE;
+  PrevStateBits = WR_STATE_COLD;
+
+  if (IsBsp (&ResetParams->StdHeader, &AgesaStatus)) {
+    CalledAgesaStatus = BldoptFchFunction.InitReset (ResetParams);
+    AgesaStatus = (CalledAgesaStatus > AgesaStatus) ? CalledAgesaStatus : AgesaStatus;
+  }
+
+  // If a previously requested warm reset cannot be triggered in the
+  // current stage, store the previous state of request and reset the
+  // request struct to the current post stage
+  GetWarmResetFlag (&ResetParams->StdHeader, &Request);
+  if (Request.RequestBit == TRUE) {
+    if (Request.StateBits >= Request.PostStage) {
+      PrevRequestBit = Request.RequestBit;
+      PrevStateBits = Request.StateBits;
+      Request.RequestBit = FALSE;
+      Request.StateBits = Request.PostStage - 1;
+      SetWarmResetFlag (&ResetParams->StdHeader, &Request);
+    }
+  }
+
+  // Initialize the PCI MMIO access mechanism
+  InitializePciMmio (&ResetParams->StdHeader);
+
+  // Initialize Hyper Transport Registers
+  if (HtOptionInitReset.HtInitReset != NULL) {
+    IDS_HDT_CONSOLE (MAIN_FLOW, "HtInitReset: Start\n");
+    CalledAgesaStatus = HtOptionInitReset.HtInitReset (&ResetParams->StdHeader, &ResetParams->HtConfig);
+    IDS_HDT_CONSOLE (MAIN_FLOW, "HtInitReset: End\n");
+    if (CalledAgesaStatus > AgesaStatus) {
+      AgesaStatus = CalledAgesaStatus;
+    }
+  }
+
+  // Warm Reset, should be at the end of AmdInitReset
+  GetWarmResetFlag (&ResetParams->StdHeader, &Request);
+  // If a warm reset is requested in the current post stage, trigger the
+  // warm reset and ignore the previous request
+  if (Request.RequestBit == TRUE) {
+    if (Request.StateBits < Request.PostStage) {
+      AgesaDoReset (WARM_RESET_WHENEVER, &ResetParams->StdHeader);
+    }
+  } else {
+    // Otherwise, if there's a previous request, restore it
+    // so that the subsequent post stage can trigger the warm reset
+    if (PrevRequestBit == TRUE) {
+      Request.RequestBit = PrevRequestBit;
+      Request.StateBits = PrevStateBits;
+      SetWarmResetFlag (&ResetParams->StdHeader, &Request);
+    }
+  }
+  // Check for Cache As Ram Corruption
+  IDS_CAR_CORRUPTION_CHECK (&ResetParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitReset: End\n\n");
+
+  AGESA_TESTPOINT (TpIfAmdInitResetExit, &ResetParams->StdHeader);
+  return  AgesaStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initialize defaults and options for Amd Init Reset.
+ *
+ * @param[in]  StdHeader        Header
+ * @param[in]  AmdResetParams   The Reset Init interface to initialize.
+ *
+ * @retval     AGESA_SUCCESS    Always Succeeds.
+ */
+AGESA_STATUS
+AmdInitResetConstructor (
+  IN       AMD_CONFIG_PARAMS    *StdHeader,
+  IN       AMD_RESET_PARAMS     *AmdResetParams
+  )
+{
+  ASSERT (AmdResetParams != NULL);
+
+  AmdResetParams->StdHeader = *StdHeader;
+
+  AmdInitResetExecutionCacheAllocateInitializer (&AmdResetParams->StdHeader, &AmdResetParams->CacheRegion[0]);
+  // Initialize Hyper Transport input structure
+  if (HtOptionInitReset.HtResetConstructor != NULL) {
+    HtOptionInitReset.HtResetConstructor (&AmdResetParams->StdHeader, &AmdResetParams->HtConfig);
+  }
+  BldoptFchFunction.InitResetConstructor (AmdResetParams);
+
+  return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitResume.c b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitResume.c
new file mode 100644
index 0000000000..02d85ac977
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdInitResume.c
@@ -0,0 +1,239 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Interface
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "Filecode.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuPostInit.h"
+#include "CommonInits.h"
+#include "cpuFeatures.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_AMDINITRESUME_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_RESUME function.
+ *
+ * This entry point is responsible for performing silicon device and memory
+ * re-initialization for the resume boot path.
+ *
+ * @param[in]     ResumeParams   Required input parameters for the AMD_INIT_RESUME
+ *                                  entry point.
+ *
+ * @return        Aggregated status across all internal AMD resume calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitResume (
+  IN       AMD_RESUME_PARAMS *ResumeParams
+  )
+{
+  VOID   *OrMaskPtr;
+  AGESA_STATUS ReturnStatus;
+  AGESA_STATUS AmdInitResumeStatus;
+  BSC_AP_MSR_SYNC ApMsrSync[4];
+
+  AGESA_TESTPOINT (TpIfAmdInitResumeEntry, &ResumeParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitResume Start\n");
+
+  AmdInitResumeStatus = AGESA_SUCCESS;
+
+  ASSERT (ResumeParams != NULL);
+
+  if (ResumeParams->S3DataBlock.NvStorage != NULL) {
+
+    MemS3ResumeInitNB (&ResumeParams->StdHeader);
+
+    // Restore registers before exiting self refresh
+    RestorePreESRContext (&OrMaskPtr,
+                          ResumeParams->S3DataBlock.NvStorage,
+                          INIT_RESUME,
+                          &ResumeParams->StdHeader);
+    // Exit self refresh
+    ReturnStatus = AmdMemS3Resume (&ResumeParams->StdHeader);
+    if (ReturnStatus > AmdInitResumeStatus) {
+      AmdInitResumeStatus = ReturnStatus;
+    }
+    if (ReturnStatus == AGESA_SUCCESS) {
+
+      // Restore registers after exiting self refresh
+      RestorePostESRContext (OrMaskPtr,
+                             ResumeParams->S3DataBlock.NvStorage,
+                             INIT_RESUME,
+                             &ResumeParams->StdHeader);
+
+      ApMsrSync[0].RegisterAddress = SYS_CFG;
+      ApMsrSync[1].RegisterAddress = TOP_MEM;
+      ApMsrSync[2].RegisterAddress = TOP_MEM2;
+      ApMsrSync[3].RegisterAddress = 0;
+      SyncApMsrsToBsc (ApMsrSync, &ResumeParams->StdHeader);
+
+      IDS_HDT_CONSOLE (CPU_TRACE, "  Dispatch CPU features after S3 AP MTRR sync\n");
+      ReturnStatus = DispatchCpuFeatures (CPU_FEAT_AFTER_RESUME_MTRR_SYNC, &ResumeParams->PlatformConfig, &ResumeParams->StdHeader);
+      if (ReturnStatus > AmdInitResumeStatus) {
+        AmdInitResumeStatus = ReturnStatus;
+      }
+    }
+  }
+
+  // Set TscFreqSel at the rate specified by the core P0
+  SetCoresTscFreqSel (&ResumeParams->StdHeader);
+
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitResume End\n");
+  // HDT out of All Aps
+  IDS_HDT_CONSOLE_FLUSH_BUFFER (&ResumeParams->StdHeader);
+  // Relinquish control of all APs to IBV
+  RelinquishControlOfAllAPs (&ResumeParams->StdHeader);
+
+  // Restore IDT
+  IDS_EXCEPTION_TRAP (IDS_IDT_RESTORE_IDTR_FOR_BSC, NULL, &ResumeParams->StdHeader);
+  IDS_OPTION_HOOK (IDS_AFTER_S3_RESUME, NULL, &ResumeParams->StdHeader);
+  AGESA_TESTPOINT (TpIfAmdInitResumeExit, &ResumeParams->StdHeader);
+  return (AmdInitResumeStatus);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Constructor for the AMD_INIT_RESUME function.
+ *
+ * This routine is responsible for setting default values for the
+ * input parameters needed by the AMD_INIT_RESUME entry point.
+ *
+ * @param[in]     StdHeader       The standard header.
+ * @param[in,out] ResumeParams   Required input parameters for the AMD_INIT_RESUME
+ *                               entry point.
+ *
+ * @retval        AGESA_SUCCESS  Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdInitResumeInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_RESUME_PARAMS *ResumeParams
+  )
+{
+  ASSERT (StdHeader != NULL);
+  ASSERT (ResumeParams != NULL);
+
+  ResumeParams->StdHeader = *StdHeader;
+
+  AmdS3ParamsInitializer (&ResumeParams->S3DataBlock);
+  CommonPlatformConfigInit (&ResumeParams->PlatformConfig, &ResumeParams->StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Destructor for the AMD_INIT_RESUME function.
+ *
+ * This routine is responsible for deallocation of heap space allocated during
+ * AMD_INIT_RESUME entry point.
+ *
+ * @param[in]    StdHeader       The standard header.
+ * @param[in,out] ResumeParams   Required input parameters for the AMD_INIT_RESUME
+ *                               entry point.
+ *
+ * @retval        AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+AmdInitResumeDestructor (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_RESUME_PARAMS *ResumeParams
+  )
+{
+  AGESA_STATUS ReturnStatus;
+  AGESA_STATUS RetVal;
+
+  ASSERT (ResumeParams != NULL);
+
+  ReturnStatus = AGESA_SUCCESS;
+
+  // Deallocate heap space allocated during memory S3 resume
+  RetVal = MemS3Deallocate (&ResumeParams->StdHeader);
+  if (RetVal > ReturnStatus) {
+    ReturnStatus = RetVal;
+  }
+
+  return ReturnStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdLateRunApTask.c b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdLateRunApTask.c
new file mode 100644
index 0000000000..2d1afe8084
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdLateRunApTask.c
@@ -0,0 +1,160 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Interface
+ * @e \$Revision: 55552 $   @e \$Date: 2011-06-22 09:31:58 -0600 (Wed, 22 Jun 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Options.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_COMMON_AMDLATERUNAPTASK_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST DISPATCH_TABLE ApDispatchTable[];
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Application Processor perform a function as directed by the BSC.
+ *
+ * This is needed for an AP task that must run after AGESA has relinquished control
+ * of the APs to the IBV.
+ *
+ * @param[in]     AmdApExeParams  The interface struct for any required routine.
+ *
+ * @return        The most severe AGESA_STATUS returned by any called service.  Note
+ *                that this will be the return value passed back to the BSC as the
+ *                return value for the call out.
+ *
+ */
+AGESA_STATUS
+AmdLateRunApTask (
+  IN       AP_EXE_PARAMS  *AmdApExeParams
+  )
+{
+  AGESA_STATUS        CalledAgesaStatus;
+  AGESA_STATUS        ApLateTaskStatus;
+  DISPATCH_TABLE      *Entry;
+
+  AGESA_TESTPOINT (TpIfAmdLateRunApTaskEntry, &AmdApExeParams->StdHeader);
+
+  ASSERT (AmdApExeParams != NULL);
+  ApLateTaskStatus = AGESA_SUCCESS;
+  CalledAgesaStatus = AGESA_UNSUPPORTED;
+
+  // Dispatch, if valid
+  Entry = (DISPATCH_TABLE *) ApDispatchTable;
+  while (Entry->FunctionId != 0) {
+    if (AmdApExeParams->FunctionNumber == Entry->FunctionId) {
+      CalledAgesaStatus = Entry->EntryPoint (AmdApExeParams);
+      break;
+    }
+    Entry++;
+  }
+
+  if (CalledAgesaStatus > ApLateTaskStatus) {
+    ApLateTaskStatus = CalledAgesaStatus;
+  }
+
+  AGESA_TESTPOINT (TpIfAmdLateRunApTaskExit, &AmdApExeParams->StdHeader);
+  return  ApLateTaskStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Constructor for the AMD_LATE_RUN_AP_TASK function.
+ *
+ * This routine is responsible for setting default values for the
+ * input parameters needed by the AMD_S3_SAVE entry point.
+ *
+ * @param[in]     StdHeader      The standard header.
+ * @param[in,out] AmdApExeParams Required input parameters for the AMD_LATE_RUN_AP_TASK
+ *                               entry point.
+ *
+ * @retval        AGESA_SUCCESS  Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdLateRunApTaskInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AP_EXE_PARAMS     *AmdApExeParams
+  )
+{
+  ASSERT (StdHeader != NULL);
+  ASSERT (AmdApExeParams != NULL);
+
+  AmdApExeParams->StdHeader = *StdHeader;
+  AmdApExeParams->FunctionNumber = 0;
+  AmdApExeParams->RelatedDataBlock = NULL;
+  AmdApExeParams->RelatedBlockLength = 0;
+  return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdS3LateRestore.c b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdS3LateRestore.c
new file mode 100644
index 0000000000..22f6803985
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdS3LateRestore.c
@@ -0,0 +1,218 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Interface
+ * @e \$Revision: 55570 $   @e \$Date: 2011-06-22 14:21:24 -0600 (Wed, 22 Jun 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "S3.h"
+#include "cpuFeatures.h"
+#include "S3SaveState.h"
+#include "CommonInits.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_AMDS3LATERESTORE_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdS3LateRestorePlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_S3LATE_RESTORE function.
+ *
+ * This entry point is responsible for restoring saved registers and preparing the
+ * silicon components for OS restart.
+ *
+ * @param[in,out] S3LateParams   Required input parameters for the AMD_S3LATE_RESTORE
+ *                                  entry point.
+ *
+ * @return        Aggregated status across all internal AMD S3 late restore calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdS3LateRestore (
+  IN OUT   AMD_S3LATE_PARAMS *S3LateParams
+  )
+{
+  UINT8  *BufferPointer;
+  VOID   *OrMaskPtr;
+  VOID   *LateContextPtr;
+  AGESA_STATUS ReturnStatus;
+  AGESA_STATUS CalledStatus;
+
+  AGESA_TESTPOINT (TpIfAmdS3LateRestoreEntry, &S3LateParams->StdHeader);
+
+  ReturnStatus = AGESA_SUCCESS;
+
+  ASSERT (S3LateParams != NULL);
+
+  BufferPointer = (UINT8 *) S3LateParams->S3DataBlock.VolatileStorage;
+  S3LateParams->StdHeader.HeapBasePtr = (UINT64) &BufferPointer[((S3_VOLATILE_STORAGE_HEADER *) S3LateParams->S3DataBlock.VolatileStorage)->HeapOffset];
+  ASSERT (S3LateParams->StdHeader.HeapBasePtr != 0);
+
+  IDS_HDT_CONSOLE_INIT (&S3LateParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "AmdS3LateRestore: Start\n\n");
+
+  IDS_OPTION_HOOK (IDS_PLATFORMCFG_OVERRIDE, &S3LateParams->PlatformConfig, &S3LateParams->StdHeader);
+  IDS_OPTION_HOOK (IDS_BEFORE_S3_RESTORE, S3LateParams, &(S3LateParams->StdHeader));
+
+  if (((S3_VOLATILE_STORAGE_HEADER *) S3LateParams->S3DataBlock.VolatileStorage)->RegisterDataSize != 0) {
+    LateContextPtr = &BufferPointer[((S3_VOLATILE_STORAGE_HEADER *) S3LateParams->S3DataBlock.VolatileStorage)->RegisterDataOffset];
+    // Restore registers before exiting self refresh
+    RestorePreESRContext (&OrMaskPtr,
+                          LateContextPtr,
+                          S3_LATE_RESTORE,
+                          &S3LateParams->StdHeader);
+    // Restore registers after exiting self refresh
+    RestorePostESRContext (OrMaskPtr,
+                           LateContextPtr,
+                           S3_LATE_RESTORE,
+                           &S3LateParams->StdHeader);
+  }
+
+  // Dispatch any features needing to run at this time point
+  IDS_HDT_CONSOLE (CPU_TRACE, "  Dispatch CPU features at S3 late restore end\n");
+  CalledStatus = DispatchCpuFeatures (CPU_FEAT_S3_LATE_RESTORE_END,
+                                      &S3LateParams->PlatformConfig,
+                                      &S3LateParams->StdHeader);
+  if (CalledStatus > ReturnStatus) {
+    ReturnStatus = CalledStatus;
+  }
+
+  CalledStatus = S3ScriptRestore (&S3LateParams->StdHeader);
+  if (CalledStatus > ReturnStatus) {
+    ReturnStatus = CalledStatus;
+  }
+
+  IDS_OPTION_HOOK (IDS_AFTER_S3_RESTORE, S3LateParams, &S3LateParams->StdHeader);
+  AGESA_TESTPOINT (TpIfAmdS3LateRestoreExit, &S3LateParams->StdHeader);
+  IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdS3LateRestore: End\n\n");
+  IDS_HDT_CONSOLE_S3_EXIT (&S3LateParams->StdHeader);
+  return  ReturnStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Constructor for the AMD_S3LATE_RESTORE function.
+ *
+ * This routine is responsible for setting default values for the
+ * input parameters needed by the AMD_S3LATE_RESTORE entry point.
+ *
+ * @param[in]     StdHeader         AMD standard header config param.
+ * @param[in,out] S3LateParams      Required input parameters for the
+ *                                  AMD_S3LATE_RESTORE entry point.
+ *
+ * @retval        AGESA_SUCCESS     Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdS3LateRestoreInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_S3LATE_PARAMS *S3LateParams
+  )
+{
+  ASSERT (StdHeader != NULL);
+  ASSERT (S3LateParams != NULL);
+
+  S3LateParams->StdHeader = *StdHeader;
+
+  AmdS3ParamsInitializer (&S3LateParams->S3DataBlock);
+
+  AmdS3LateRestorePlatformConfigInit (&S3LateParams->PlatformConfig, &S3LateParams->StdHeader);
+
+  return AGESA_SUCCESS;
+}
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initialize AmdS3LateRestore stage platform profile and user option input.
+ *
+ * @param[in,out]   PlatformConfig   Platform profile/build option config structure
+ * @param[in,out]   StdHeader        AMD standard header config param
+ *
+ * @retval          AGESA_SUCCESS    Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdS3LateRestorePlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  CommonPlatformConfigInit (PlatformConfig, StdHeader);
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/AmdS3Save.c b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdS3Save.c
new file mode 100644
index 0000000000..6cff161d84
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/AmdS3Save.c
@@ -0,0 +1,388 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Interface
+ * @e \$Revision: 55552 $   @e \$Date: 2011-06-22 09:31:58 -0600 (Wed, 22 Jun 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "CommonInits.h"
+#include "AmdFch.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_COMMON_AMDS3SAVE_FILECODE
+
+extern BLDOPT_FCH_FUNCTION  BldoptFchFunction;
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+CONST UINT32 ROMDATA S3LateHeapTable[] =
+{
+  EVENT_LOG_BUFFER_HANDLE,
+  SOCKET_DIE_MAP_HANDLE,
+  NODE_ID_MAP_HANDLE,
+  LOCAL_AP_MAIL_BOX_CACHE_HANDLE,
+  IDS_CONTROL_HANDLE,
+  AMD_S3_SCRIPT_SAVE_TABLE_HANDLE,
+  AMD_PCIE_COMPLEX_DATA_HANDLE
+};
+
+#define S3LATE_TABLE_SIZE (sizeof (S3LateHeapTable) / sizeof (UINT32)) //(sizeof (S3LateHeapTable) / sizeof (S3LATE_HEAP_ELEMENT))
+
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdS3SavePlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_S3_SAVE function.
+ *
+ * This entry point is responsible for saving silicon component registers to the
+ * SMM save area in preparation of entering system suspend-to-RAM mode.
+ *
+ * @param[in,out] AmdS3SaveParams   Required input parameters for the AMD_S3_SAVE
+ *                                  entry point.
+ *
+ * @return        Aggregated status across all internal AMD S3 save calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdS3Save (
+  IN OUT   AMD_S3SAVE_PARAMS *AmdS3SaveParams
+  )
+{
+  UINTN  i;
+  UINT32 EarlyBufferSize;
+  UINT32 LateBufferSize;
+  UINT32 LateContextSize;
+  UINT32 HeapSize;
+  UINT8  *BufferPointer;
+  UINT8  HeapStatus;
+  ALLOCATE_HEAP_PARAMS HeapParams;
+  LOCATE_HEAP_PTR LocateHeap;
+  BUFFER_NODE *FreeSpaceNode;
+  ALLOCATE_HEAP_PARAMS AllocParams;
+  DEVICE_BLOCK_HEADER *MemoryRelatedDeviceList;
+  DEVICE_BLOCK_HEADER *NonMemoryRelatedDeviceList;
+  AGESA_STATUS ReturnStatus;
+  VOID   *HeapPtrs[S3LATE_TABLE_SIZE];
+  UINT32 HeapSizes[S3LATE_TABLE_SIZE];
+  UINT32 HeapBuffersPresent;
+  HEAP_MANAGER *HeapPtr;
+
+  AGESA_TESTPOINT (TpIfAmdS3SaveEntry, &AmdS3SaveParams->StdHeader);
+
+  ASSERT (AmdS3SaveParams != NULL);
+
+  HeapBuffersPresent = 0;
+  EarlyBufferSize = 0;
+  LateBufferSize = 0;
+  LateContextSize = 0;
+  HeapSize = 0;
+  NonMemoryRelatedDeviceList = NULL;
+  MemoryRelatedDeviceList = NULL;
+  ReturnStatus = AGESA_SUCCESS;
+
+  IDS_SKIP_HOOK (IDS_BEFORE_S3_SAVE, AmdS3SaveParams, &(AmdS3SaveParams->StdHeader)) {
+
+    // Get memory device list
+    MemFS3GetDeviceList (&MemoryRelatedDeviceList, &AmdS3SaveParams->StdHeader);
+    if (MemoryRelatedDeviceList != NULL) {
+      // Determine size needed
+      EarlyBufferSize = GetWorstCaseContextSize (MemoryRelatedDeviceList, INIT_RESUME, &AmdS3SaveParams->StdHeader);
+    }
+
+    if (UserOptions.CfgS3LateRestore) {
+      for (i = 0; i < S3LATE_TABLE_SIZE; i++) {
+        LocateHeap.BufferHandle = S3LateHeapTable[i];
+        if (HeapLocateBuffer (&LocateHeap, &AmdS3SaveParams->StdHeader) == AGESA_SUCCESS) {
+          HeapBuffersPresent++;
+          HeapSize += LocateHeap.BufferSize;
+          HeapPtrs[i] = LocateHeap.BufferPtr;
+          HeapSizes[i] = LocateHeap.BufferSize;
+        } else {
+          HeapPtrs[i] = NULL;
+          HeapSizes[i] = 0;
+        }
+      }
+
+      // Determine heap data size requirements
+      if (HeapBuffersPresent != 0) {
+        HeapSize += ((sizeof (HEAP_MANAGER)) + (HeapBuffersPresent * ((sizeof (BUFFER_NODE)) + (NUM_OF_SENTINEL * SIZE_OF_SENTINEL) + 0xF))); // reserve 0xF per buffer node for 16 byte alignment
+      }
+
+      // Get non memory device list
+      GetNonMemoryRelatedDeviceList (&NonMemoryRelatedDeviceList, &AmdS3SaveParams->StdHeader);
+
+      if (NonMemoryRelatedDeviceList != NULL) {
+        // Determine size needed
+        LateContextSize = GetWorstCaseContextSize (NonMemoryRelatedDeviceList, S3_LATE_RESTORE, &AmdS3SaveParams->StdHeader);
+      }
+      LateBufferSize = HeapSize + LateContextSize;
+      if (LateBufferSize != 0) {
+        LateBufferSize += sizeof (S3_VOLATILE_STORAGE_HEADER);
+      }
+    }
+
+    if ((EarlyBufferSize != 0) || (LateBufferSize != 0)) {
+      //
+      // Allocate a buffer
+      //
+      AllocParams.RequestedBufferSize = EarlyBufferSize + LateBufferSize;
+      AllocParams.BufferHandle = AMD_S3_INFO_BUFFER_HANDLE;
+      AllocParams.Persist = 0;
+
+      AGESA_TESTPOINT (TpIfBeforeAllocateS3SaveBuffer, &AmdS3SaveParams->StdHeader);
+      if (HeapAllocateBuffer (&AllocParams, &AmdS3SaveParams->StdHeader) != AGESA_SUCCESS) {
+        if (AGESA_ERROR > ReturnStatus) {
+          ReturnStatus = AGESA_ERROR;
+        }
+      }
+      AGESA_TESTPOINT (TpIfAfterAllocateS3SaveBuffer, &AmdS3SaveParams->StdHeader);
+
+      if (EarlyBufferSize != 0) {
+        AmdS3SaveParams->S3DataBlock.NvStorage = AllocParams.BufferPtr;
+        SaveDeviceListContext (MemoryRelatedDeviceList,
+                           AmdS3SaveParams->S3DataBlock.NvStorage,
+                           INIT_RESUME,
+                           &EarlyBufferSize,
+                           &AmdS3SaveParams->StdHeader);
+
+        AmdS3SaveParams->S3DataBlock.NvStorageSize = EarlyBufferSize;
+      }
+
+      if (LateBufferSize != 0) {
+        BufferPointer = AllocParams.BufferPtr;
+        AmdS3SaveParams->S3DataBlock.VolatileStorage = &(BufferPointer[EarlyBufferSize]);
+
+        ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->HeapOffset = 0;
+        ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->HeapSize = HeapSize;
+        ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->RegisterDataOffset = 0;
+        ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->RegisterDataSize = LateContextSize;
+
+        if (HeapSize != 0) {
+          // Transfer heap contents
+          ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->HeapOffset = sizeof (S3_VOLATILE_STORAGE_HEADER);
+          HeapPtr = (HEAP_MANAGER *) &BufferPointer[EarlyBufferSize + sizeof (S3_VOLATILE_STORAGE_HEADER)];
+          HeapPtr->UsedSize = sizeof (HEAP_MANAGER);
+          HeapPtr->Signature = HEAP_SIGNATURE_VALID;
+          HeapPtr->FirstActiveBufferOffset = AMD_HEAP_INVALID_HEAP_OFFSET;
+          HeapPtr->FirstFreeSpaceOffset = sizeof (HEAP_MANAGER);
+          FreeSpaceNode = (BUFFER_NODE *) ((UINT8 *) HeapPtr + sizeof (HEAP_MANAGER));
+          FreeSpaceNode->BufferSize = HeapSize - sizeof (HEAP_MANAGER) - sizeof (BUFFER_NODE);
+          FreeSpaceNode->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+
+          HeapStatus = AmdS3SaveParams->StdHeader.HeapStatus;
+          AmdS3SaveParams->StdHeader.HeapStatus = HEAP_S3_RESUME;
+          AmdS3SaveParams->StdHeader.HeapBasePtr = (UINT64) HeapPtr;
+
+          for (i = 0; i < S3LATE_TABLE_SIZE; i++) {
+            if (HeapPtrs[i] != NULL) {
+              HeapParams.RequestedBufferSize = HeapSizes[i]; // S3LateHeapTable[i].BufferLength;
+              HeapParams.BufferHandle = S3LateHeapTable[i];
+              HeapParams.Persist = HEAP_S3_RESUME;
+              if (HeapAllocateBuffer (&HeapParams, &AmdS3SaveParams->StdHeader) == AGESA_SUCCESS) {
+                LibAmdMemCopy ((VOID *) HeapParams.BufferPtr, HeapPtrs[i], HeapSizes[i], &AmdS3SaveParams->StdHeader);
+              }
+            }
+          }
+
+          AmdS3SaveParams->StdHeader.HeapStatus = HeapStatus;
+        }
+
+
+        if (LateContextSize != 0) {
+
+          ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->RegisterDataOffset = HeapSize + sizeof (S3_VOLATILE_STORAGE_HEADER);
+
+          SaveDeviceListContext (NonMemoryRelatedDeviceList,
+                                &(BufferPointer[EarlyBufferSize + HeapSize + sizeof (S3_VOLATILE_STORAGE_HEADER)]),
+                                S3_LATE_RESTORE,
+                                &LateContextSize,
+                                &AmdS3SaveParams->StdHeader);
+        }
+
+        AmdS3SaveParams->S3DataBlock.VolatileStorageSize = HeapSize + LateContextSize + sizeof (S3_VOLATILE_STORAGE_HEADER);
+      }
+    }
+  }
+
+  ReturnStatus = BldoptFchFunction.InitLate (AmdS3SaveParams);
+
+  IDS_OPTION_HOOK (IDS_AFTER_S3_SAVE, AmdS3SaveParams, &AmdS3SaveParams->StdHeader);
+  AGESA_TESTPOINT (TpIfAmdS3SaveExit, &AmdS3SaveParams->StdHeader);
+  return  ReturnStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Constructor for the AMD_S3_SAVE function.
+ *
+ * This routine is responsible for setting default values for the
+ * input parameters needed by the AMD_S3_SAVE entry point.
+ *
+ * @param[in]    StdHeader       The standard header.
+ * @param[in,out] S3SaveParams   Required input parameters for the AMD_S3_SAVE
+ *                               entry point.
+ *
+ * @retval        AGESA_SUCCESS  Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdS3SaveInitializer (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_S3SAVE_PARAMS *S3SaveParams
+  )
+{
+  ASSERT (StdHeader != NULL);
+  ASSERT (S3SaveParams != NULL);
+
+  S3SaveParams->StdHeader = *StdHeader;
+
+  AmdS3ParamsInitializer (&S3SaveParams->S3DataBlock);
+
+  AmdS3SavePlatformConfigInit (&S3SaveParams->PlatformConfig, &S3SaveParams->StdHeader);
+  BldoptFchFunction.InitLateConstructor (S3SaveParams);
+
+  return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Destructor for the AMD_S3_SAVE function.
+ *
+ * This routine is responsible for deallocation of heap space allocated during
+ * AMD_S3_SAVE entry point.
+ *
+ * @param[in]     StdHeader       The standard header.
+ * @param[in,out] S3SaveParams   Required input parameters for the AMD_INIT_RESUME
+ *                               entry point.
+ *
+ * @retval        AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+AmdS3SaveDestructor (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_S3SAVE_PARAMS *S3SaveParams
+  )
+{
+  AGESA_STATUS ReturnStatus;
+  AGESA_STATUS RetVal;
+
+  ASSERT (S3SaveParams != NULL);
+
+  ReturnStatus = AGESA_SUCCESS;
+
+  // Deallocate heap space allocated during memory S3 save
+  RetVal = MemS3Deallocate (&S3SaveParams->StdHeader);
+  if (RetVal > ReturnStatus) {
+    ReturnStatus = RetVal;
+  }
+
+  RetVal = HeapDeallocateBuffer (AMD_S3_NB_INFO_BUFFER_HANDLE, StdHeader);
+  if (RetVal > ReturnStatus) {
+    ReturnStatus = RetVal;
+  }
+
+  RetVal = HeapDeallocateBuffer (AMD_S3_INFO_BUFFER_HANDLE, StdHeader);
+  if (RetVal > ReturnStatus) {
+    ReturnStatus = RetVal;
+  }
+
+  return ReturnStatus;
+}
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initialize AmdS3Save stage platform profile and user option input.
+ *
+ * @param[in,out]   PlatformConfig   Platform profile/build option config structure
+ * @param[in,out]   StdHeader        AMD standard header config param
+ *
+ * @retval          AGESA_SUCCESS    Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdS3SavePlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  CommonPlatformConfigInit (PlatformConfig, StdHeader);
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/CommonInits.c b/src/vendorcode/amd/agesa/f15/Proc/Common/CommonInits.c
new file mode 100644
index 0000000000..5e52f3c121
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/CommonInits.c
@@ -0,0 +1,139 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Common initialization routines.
+ *
+ * Contains common initialization routines across AGESA entries of phases.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Common
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CommonInits.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_COMMONINITS_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------------*/
+
+/**
+ * Common routine to initialize PLATFORM_CONFIGURATION.
+ *
+ * @param[in,out]   PlatformConfig   Platform profile/build option config structure
+ * @param[in,out]   StdHeader        AMD standard header config param
+ *
+ * @retval      AGESA_SUCCESS     Always Succeeds.
+ *
+ */
+AGESA_STATUS
+CommonPlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  UINTN i;
+
+  PlatformConfig->PlatformProfile = UserOptions.CfgPerformanceProfile;
+  PlatformConfig->PlatformDeemphasisList = UserOptions.CfgPlatformDeemphasisList;
+  PlatformConfig->CoreLevelingMode = (UINT8) UserOptions.CfgCoreLevelingMode;
+  PlatformConfig->C1eMode = UserOptions.CfgPlatformC1eMode;
+  PlatformConfig->C1ePlatformData = UserOptions.CfgPlatformC1eOpData;
+  PlatformConfig->C1ePlatformData1 = UserOptions.CfgPlatformC1eOpData1;
+  PlatformConfig->C1ePlatformData2 = UserOptions.CfgPlatformC1eOpData2;
+  PlatformConfig->C1ePlatformData3 = UserOptions.CfgPlatformC1eOpData3;
+  PlatformConfig->CStateMode = UserOptions.CfgPlatformCStateMode;
+  PlatformConfig->CStatePlatformData = UserOptions.CfgPlatformCStateOpData;
+  PlatformConfig->CStateIoBaseAddress = UserOptions.CfgPlatformCStateIoBaseAddress;
+  PlatformConfig->CpbMode = UserOptions.CfgPlatformCpbMode;
+  PlatformConfig->UserOptionDmi = UserOptions.OptionDmi;
+  PlatformConfig->UserOptionPState = UserOptions.OptionAcpiPstates;
+  PlatformConfig->UserOptionSrat = UserOptions.OptionSrat;
+  PlatformConfig->UserOptionSlit = UserOptions.OptionSlit;
+  PlatformConfig->UserOptionWhea = UserOptions.OptionWhea;
+  PlatformConfig->LowPowerPstateForProcHot = UserOptions.CfgLowPowerPstateForProcHot;
+  PlatformConfig->PowerCeiling = UserOptions.CfgAmdPstateCapValue;
+  PlatformConfig->ForcePstateIndependent = UserOptions.CfgAcpiPstateIndependent;
+  PlatformConfig->PStatesInHpcMode = UserOptions.OptionPStatesInHpcMode;
+  PlatformConfig->NumberOfIoApics = UserOptions.CfgPlatNumIoApics;
+  for (i = 0; i < MaxVrmType; i++) {
+    PlatformConfig->VrmProperties[i] = UserOptions.CfgPlatVrmCfg[i];
+  }
+  PlatformConfig->ProcessorScopeInSb = UserOptions.CfgProcessorScopeInSb;
+  PlatformConfig->ProcessorScopeName0 = UserOptions.CfgProcessorScopeName0;
+  PlatformConfig->ProcessorScopeName1 = UserOptions.CfgProcessorScopeName1;
+  PlatformConfig->GnbHdAudio = UserOptions.CfgGnbHdAudio;
+  PlatformConfig->AbmSupport = UserOptions.CfgAbmSupport;
+  PlatformConfig->DynamicRefreshRate = UserOptions.CfgDynamicRefreshRate;
+  PlatformConfig->LcdBackLightControl = UserOptions.CfgLcdBackLightControl;
+  if ((StdHeader->HeapStatus == HEAP_LOCAL_CACHE) ||
+      (StdHeader->HeapStatus == HEAP_TEMP_MEM) ||
+      (StdHeader->HeapStatus == HEAP_SYSTEM_MEM)) {
+    IDS_OPTION_HOOK (IDS_PLATFORMCFG_OVERRIDE, PlatformConfig, StdHeader);
+  }
+  return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/CommonInits.h b/src/vendorcode/amd/agesa/f15/Proc/Common/CommonInits.h
new file mode 100644
index 0000000000..2d54a7d3d9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/CommonInits.h
@@ -0,0 +1,66 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Common initialization routines.
+ *
+ * Contains common initialization routines across AGESA entries of phases.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Common
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _COMMON_INITS_H_
+#define _COMMON_INITS_H_
+
+/**
+ * Common routine to initialize PLATFORM_CONFIGURATION.
+ *
+ * @param[in,out]   PlatformConfig   Platform profile/build option config structure
+ * @param[in,out]   StdHeader        AMD standard header config param
+ *
+ * @retval      AGESA_SUCCESS     Always Succeeds.
+ *
+ */
+AGESA_STATUS
+CommonPlatformConfigInit (
+  IN OUT   PLATFORM_CONFIGURATION    *PlatformConfig,
+  IN OUT   AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+#endif // _COMMON_INITS_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/CommonPage.h b/src/vendorcode/amd/agesa/f15/Proc/Common/CommonPage.h
new file mode 100644
index 0000000000..bb2849a6a6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/CommonPage.h
@@ -0,0 +1,117 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Create outline and references for Processor Common Component mainpage documentation.
+ *
+ * Design guides, maintenance guides, and general documentation, are
+ * collected using this file onto the documentation mainpage.
+ * This file contains doxygen comment blocks, only.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Documentation
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/**
+ * @page commonmain Processor Common Component Documentation
+ *
+ * Additional documentation for the Common component consists of
+ *
+ * - Maintenance Guides:
+ *   - @subpage amdconfigparamname "Naming Guidelines for type AMD_CONFIG_PARAMS"
+ * - Design Guides:
+ *   - add here >>>
+ *
+ */
+
+/**
+ * @page amdconfigparamname Naming Guidelines for type AMD_CONFIG_PARAMS
+ * @par
+ * These are the guidelines for naming objects of type AMD_CONFIG_PARAMS and AMD_CONFIG_PARAMS * in AGESA code.
+ * <ul>
+ *
+ * <li>
+ * Formal parameter names of type AMD_CONFIG_PARAMS and AMD_CONFIG_PARAMS * will always be named
+ * StdHeader. This covers all function prototypes, function definitions, and method typedefs (a
+ * typedef of a function prototype) in AGESA code. Examples:
+ * @n @code
+ * VOID
+ *   LibAmdPciFindNextCap (
+ *     IN OUT   PCI_ADDR *Address,
+ *     IN       AMD_CONFIG_PARAMS *StdHeader
+ *     )
+ *
+ * typedef VOID F_DO_TABLE_ENTRY (
+ *   IN       TABLE_ENTRY_DATA       *CurrentEntry,
+ *   IN       PLATFORM_CONFIGURATION *PlatformConfig,
+ *   IN       AMD_CONFIG_PARAMS      *StdHeader
+ *   );
+ *
+ * @endcode
+ *
+ * <li>
+ * Structure members of type AMD_CONFIG_PARAMS or AMD_CONFIG_PARAMS * will always be named StdHeader. Examples:
+ * @n @code
+   /// Example of struct member naming.
+ * typedef struct {
+ *   IN OUT   AMD_CONFIG_PARAMS StdHeader;             ///< Standard Header
+ *   IN       PLATFORM_CONFIGURATION PlatformConfig;   ///< platform operational characteristics.
+ * } AMD_CPU_RECOVERY_PARAMS;
+ *
+ * @endcode
+ *
+ * <li>
+ * Routines which define local variables of type AMD_CONFIG_PARAMS or AMD_CONFIG_PARAMS * should
+ * name the local variable as closely as practical to StdHeader, but otherwise freedom is allowed. Example:
+ * @n @code
+ * AMD_CONFIG_PARAMS *NewStdHeader;
+ * [...]
+ * NewStdHeader = (AMD_CONFIG_PARAMS *)AllocHeapParams.BufferPtr;
+ * @endcode
+ *
+ * <li>
+ * Arguments to routines with AMD_CONFIG_PARAMS or AMD_CONFIG_PARAMS * formal parameters are not
+ * checked.  Freedom is allowed in order to conform to these guidelines in a practical, readable
+ * way.  This includes typecast arguments.  Examples:
+ * @n @code
+ * Status = GetEventLog (&LogEvent, (AMD_CONFIG_PARAMS *)Event);
+ *
+ * MemS3ExitSelfRefRegDA (NBPtr, &MemPtr->StdHeader);
+ * @endcode
+ *
+ * </ul>
+ *
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/CommonReturns.c b/src/vendorcode/amd/agesa/f15/Proc/Common/CommonReturns.c
new file mode 100644
index 0000000000..8c79f9e2b4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/CommonReturns.c
@@ -0,0 +1,213 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Common Return routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Common
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "Filecode.h"
+#include "CommonReturns.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_COMMONRETURNS_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+CommonFchInitStub (
+  IN       VOID       *DataPtr
+  );
+
+VOID
+FchTaskDummy (
+  IN       VOID       *DataPtr
+  );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+* Return TRUE.
+*
+* @retval TRUE  Default case, no special action
+*/
+BOOLEAN
+CommonReturnTrue ( VOID )
+{
+  return TRUE;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+* Return False.
+*
+* @retval FALSE  Default case, no special action
+*/
+BOOLEAN
+CommonReturnFalse ( VOID )
+{
+  return FALSE;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return (UINT8)zero.
+ *
+ *
+ * @retval zero    None, or only case zero.
+ */
+UINT8
+CommonReturnZero8 ( VOID )
+{
+  return 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return (UINT32)zero.
+ *
+ *
+ * @retval zero    None, or only case zero.
+ */
+UINT32
+CommonReturnZero32 ( VOID )
+{
+  return 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return (UINT64)zero.
+ *
+ *
+ * @retval zero    None, or only case zero.
+ */
+UINT64
+CommonReturnZero64 ( VOID )
+{
+  return 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return NULL
+ *
+ * @retval NULL    pointer to nothing
+ */
+VOID *
+CommonReturnNULL ( VOID )
+{
+  return NULL;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+* Return AGESA_SUCCESS.
+*
+* @retval AGESA_SUCCESS Success.
+*/
+AGESA_STATUS
+CommonReturnAgesaSuccess ( VOID )
+{
+  return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Do Nothing.
+ *
+ */
+VOID
+CommonVoid ( VOID )
+{
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * ASSERT if this routine is called.
+ *
+ */
+VOID
+CommonAssert ( VOID )
+{
+  ASSERT (FALSE);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+* Return AGESA_SUCCESS.
+*
+* @retval AGESA_SUCCESS Success.
+*/
+AGESA_STATUS
+CommonFchInitStub (
+  IN       VOID       *DataPtr
+  )
+{
+  return AGESA_SUCCESS;
+}
+
+
+VOID
+FchTaskDummy (
+  IN       VOID       *DataPtr
+  )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/CreateStruct.c b/src/vendorcode/amd/agesa/f15/Proc/Common/CreateStruct.c
new file mode 100644
index 0000000000..ad007e4386
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/CreateStruct.c
@@ -0,0 +1,314 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Input Structure Creation
+ *
+ * Contains AGESA input structure creation support.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Common
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_CREATESTRUCT_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST FUNCTION_PARAMS_INFO FuncParamsInfo[];
+extern CONST UINTN InitializerCount;
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Allocate and initialize Config headers and Service Interface structures.
+ *
+ * This function will be called for each AGESA public APIs.
+ * This function will do the following:
+ * -# Locate the AGESA API structure parameters initializer function information.
+ * -# Find the size of the structure that gets passed to each public APIs as
+ *    the entry parameter. Allocate heap space using the size for PreMemHeap, callout for
+ *    memory allocation for PostMemDram, and just set the config and service interface
+ *    pointers for ByHost.
+ * -# If the allocation is not ByHost, copy the AmdConfigParams into the newly created AmdConfigParams.
+ *    For ByHost, we're using the caller's existing config params.
+ * -# Call the initializer function, and pass a reference to the Config params and to
+ *    the Service Interface struct.  On return the constructor will have filled the
+ *    remaining structure with default values.
+ * -# Fill the remaining info in the newly created structure on heap in AMD_CONFIG_PARAMS
+ *    area (i.e. Fill *newStructPtr with the pointer to the newly created structure)
+ * -# Set the appropriate AGESA function number in the StdHeader member of the input
+ *    parameter structure.
+ *
+ * @param[in,out]  InterfaceParams         Pointer to structure containing the function call
+ *                                         whose parameter structure is to be created, the
+ *                                         allocation method, and a pointer to the newly
+ *                                         created structure.
+ *
+ * @retval         AGESA_SUCCESS           The interface struct is allocated and initialized.
+ * @retval         AGESA_UNSUPPORTED       The Service is not supported.
+ *
+ */
+AGESA_STATUS
+AmdCreateStruct (
+  IN OUT   AMD_INTERFACE_PARAMS *InterfaceParams
+  )
+{
+  UINTN                     ServiceIndex;
+  ALLOCATE_HEAP_PARAMS      AllocHeapParams;
+  AMD_CONFIG_PARAMS         *NewlyCreatedConfig;
+  VOID                      *NewlyCreatedServiceInterface;
+  AGESA_STATUS              AgesaStatus;
+  AGESA_STATUS              TempStatus;
+  AGESA_STATUS              IgnoredSts;
+  CPU_SPECIFIC_SERVICES     *FamilySpecificServices;
+
+  AgesaStatus = AGESA_SUCCESS;
+
+  ASSERT (InterfaceParams != NULL);
+
+  switch (InterfaceParams->AgesaFunctionName) {
+  case AMD_INIT_RESET:
+    if (!IsBsp (&InterfaceParams->StdHeader, &IgnoredSts)) {
+      // APs must transfer their system core number from the mailbox to
+      // a local register while it is still valid.
+      GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &InterfaceParams->StdHeader);
+      FamilySpecificServices->TransferApCoreNumber (FamilySpecificServices, &InterfaceParams->StdHeader);
+    }
+    InterfaceParams->StdHeader.HeapStatus = HEAP_DO_NOT_EXIST_YET;
+    break;
+  case AMD_INIT_EARLY:
+  case AMD_INIT_RECOVERY:
+  case AMD_INIT_RESUME:
+  case AMD_INIT_POST:
+    InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE;
+    break;
+  case AMD_INIT_ENV:
+    InterfaceParams->StdHeader.HeapStatus = HEAP_TEMP_MEM;
+    break;
+  case AMD_INIT_LATE:
+  case AMD_INIT_MID:
+  case AMD_S3_SAVE:
+  case AMD_LATE_RUN_AP_TASK:
+    InterfaceParams->StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+    break;
+  case AMD_S3LATE_RESTORE:
+    InterfaceParams->StdHeader.HeapStatus = HEAP_S3_RESUME;
+    break;
+  default:
+    ASSERT (FALSE);
+    InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE;
+    break;
+  }
+
+  InterfaceParams->StdHeader.HeapBasePtr = HeapGetBaseAddress (&InterfaceParams->StdHeader);
+
+  if (InterfaceParams->AgesaFunctionName == AMD_INIT_RESET) {
+    AgesaStatus = HeapManagerInit (&InterfaceParams->StdHeader);
+  }
+
+  // Step 1
+  for (ServiceIndex = 0; ServiceIndex < InitializerCount; ServiceIndex++) {
+    if (FuncParamsInfo[ServiceIndex].AgesaFunctionName == InterfaceParams->AgesaFunctionName) {
+      break;
+    }
+  }
+  if (ServiceIndex >= InitializerCount) {
+    // A call was made to AGESA with an invalid function number.  This wrapper error may be due to the build target
+    // not containing the desired entry point.
+    return AGESA_UNSUPPORTED;
+  }
+
+  // Step 2
+  LibAmdMemFill (&AllocHeapParams, 0, (UINTN) (sizeof (ALLOCATE_HEAP_PARAMS)), &InterfaceParams->StdHeader);
+
+  if (InterfaceParams->AllocationMethod < ByHost) {
+    // Allocate one buffer to contain the config params and the service struct.
+    // The service struct begins immediately after the config params.
+    AllocHeapParams.RequestedBufferSize = FuncParamsInfo[ServiceIndex].CreateStructSize + sizeof (AMD_CONFIG_PARAMS);
+    AllocHeapParams.BufferHandle = FuncParamsInfo[ServiceIndex].BufferHandle;
+    AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+    TempStatus = HeapAllocateBuffer (&AllocHeapParams, &(InterfaceParams->StdHeader));
+    AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus);
+    NewlyCreatedConfig = (AMD_CONFIG_PARAMS *)AllocHeapParams.BufferPtr;
+    NewlyCreatedConfig++;
+    NewlyCreatedServiceInterface =  NewlyCreatedConfig;
+    NewlyCreatedConfig = (AMD_CONFIG_PARAMS *)AllocHeapParams.BufferPtr;
+  } else {
+    // The caller (example, agesa basic interface implementation) already has a buffer to use.
+    NewlyCreatedConfig = (AMD_CONFIG_PARAMS *)InterfaceParams;
+    NewlyCreatedServiceInterface = InterfaceParams->NewStructPtr;
+    ASSERT (InterfaceParams->NewStructSize >= FuncParamsInfo[ServiceIndex].CreateStructSize);
+  }
+  ASSERT (NewlyCreatedConfig != NULL);
+  ASSERT (NewlyCreatedServiceInterface != NULL);
+
+  // Step 3
+  if (InterfaceParams->AllocationMethod != ByHost) {
+    *NewlyCreatedConfig = InterfaceParams->StdHeader;
+  }
+
+  // Step 4
+  TempStatus = FuncParamsInfo[ServiceIndex].AgesaFunction (NewlyCreatedConfig, NewlyCreatedServiceInterface);
+  AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus);
+
+  // Step 5
+  if (InterfaceParams->AllocationMethod != ByHost) {
+    InterfaceParams->NewStructPtr = (VOID *) NewlyCreatedServiceInterface;
+    InterfaceParams->NewStructSize = FuncParamsInfo[ServiceIndex].CreateStructSize;
+  }
+
+  // Step 6
+  ((AMD_CONFIG_PARAMS *) InterfaceParams->NewStructPtr)->Func = InterfaceParams->AgesaFunctionName;
+  return AgesaStatus;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  Clears storage space from allocation for a parameter block of an
+ *  AGESA software call entry.
+ *
+ *  @param[in,out]  InterfaceParams         Pointer to structure containing the function call
+ *                                          whose parameter structure is to be deallocated.
+ *
+ *  @retval         AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+AmdReleaseStruct (
+  IN OUT   AMD_INTERFACE_PARAMS *InterfaceParams
+  )
+{
+  UINT8 i;
+  UINT8 *BufferPtr;
+  VOID  *ServicePtr;
+  AGESA_STATUS  AgesaStatus;
+  AGESA_STATUS  TempStatus;
+  LOCATE_HEAP_PTR LocHeap;
+
+  AgesaStatus = AGESA_SUCCESS;
+
+  switch (InterfaceParams->AgesaFunctionName) {
+  case AMD_INIT_RESET:
+  case AMD_INIT_EARLY:
+  case AMD_INIT_RECOVERY:
+  case AMD_INIT_RESUME:
+    InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE;
+    break;
+  case AMD_INIT_POST:
+    InterfaceParams->StdHeader.HeapStatus = HEAP_TEMP_MEM;
+    break;
+  case AMD_INIT_ENV:
+  case AMD_INIT_LATE:
+  case AMD_INIT_MID:
+  case AMD_S3_SAVE:
+  case AMD_LATE_RUN_AP_TASK:
+    InterfaceParams->StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+    break;
+  case AMD_S3LATE_RESTORE:
+    InterfaceParams->StdHeader.HeapStatus = HEAP_S3_RESUME;
+    break;
+  default:
+    ASSERT (FALSE);
+    InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE;
+    break;
+  }
+
+  InterfaceParams->StdHeader.HeapBasePtr = HeapGetBaseAddress (&InterfaceParams->StdHeader);
+
+// Step 1
+  for (i = 0; i < InitializerCount; i++) {
+    if (FuncParamsInfo[i].AgesaFunctionName == InterfaceParams->AgesaFunctionName) {
+      break;
+    }
+  }
+  if (i >= InitializerCount) {
+    return AGESA_BOUNDS_CHK;
+  }
+
+  // Step 2
+  if (InterfaceParams->AllocationMethod < ByHost) {
+    LocHeap.BufferHandle = FuncParamsInfo[i].BufferHandle;
+    if (HeapLocateBuffer (&LocHeap, &(InterfaceParams->StdHeader)) == AGESA_SUCCESS) {
+      BufferPtr = (UINT8 *) LocHeap.BufferPtr;
+      ServicePtr = &BufferPtr[sizeof (AMD_CONFIG_PARAMS)];
+      TempStatus = FuncParamsInfo[i].AgesaDestructor (&(InterfaceParams->StdHeader), ServicePtr);
+      AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus);
+    }
+  }
+
+  // Step 3
+  if (InterfaceParams->AllocationMethod < ByHost) {
+    TempStatus = HeapDeallocateBuffer (FuncParamsInfo[i].BufferHandle, &(InterfaceParams->StdHeader));
+    AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus);
+  } else {
+    // Unless we define service specific destructors, nothing to do for ByHost.
+    return AGESA_SUCCESS;
+  }
+  return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/CreateStruct.h b/src/vendorcode/amd/agesa/f15/Proc/Common/CreateStruct.h
new file mode 100644
index 0000000000..ce1fb4cfdf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/CreateStruct.h
@@ -0,0 +1,196 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Input Structure Creation
+ *
+ * Contains AGESA input creation structures.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Common
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CREATE_STRUCT_H_
+#define _CREATE_STRUCT_H_
+
+/**
+ * A constructor method.
+ *
+ * Sets inputs to valid, basic level, defaults for the specific service instance.
+ * Constructors should avoid using the header, since these routines should not
+ * do operations which may fail or require status back to the user.  The constructor
+ * should always SUCCEED.
+ *
+ * @param[in]   StdHeader         Opaque handle to standard config header
+ * @param[in]   ServiceInterface  Service Interface structure to initialize.
+ *
+ * @retval AGESA_SUCCESS      Constructors are not allowed to fail
+*/
+typedef AGESA_STATUS
+F_AGESA_FUNCTION (
+  IN       AMD_CONFIG_PARAMS    *StdHeader,
+  IN       VOID                 *ServiceInterface
+  );
+
+/// Reference to a Method.
+typedef F_AGESA_FUNCTION *PF_AGESA_FUNCTION;
+
+/**
+ * A Destructor method.
+ *
+ * Sets inputs to valid, basic level, defaults for the specific service instance.
+ * The constructor should always SUCCEED.
+ *
+ * @param[in]   StdHeader         Opaque handle to standard config header.
+ * @param[in]   ServiceInterface  Service Interface structure to initialize.
+ *
+ * @retval AGESA_SUCCESS      Constructors are not allowed to fail
+*/
+typedef AGESA_STATUS
+F_AGESA_DESTRUCTOR (
+  IN       AMD_CONFIG_PARAMS    *StdHeader,
+  IN       VOID                 *ServiceInterface
+  );
+
+/// Reference to a Method.
+typedef F_AGESA_DESTRUCTOR *PF_AGESA_DESTRUCTOR;
+
+/**
+ * Provide the information needed to invoke each service constructor.
+ */
+typedef struct {
+  IN       AGESA_STRUCT_NAME   AgesaFunctionName;  ///< Identifies the service
+  IN       UINT16              CreateStructSize;   ///< The service's input struct size.
+                                                   ///  Do NOT include a config params header!
+     OUT   PF_AGESA_FUNCTION   AgesaFunction;      ///< The constructor function
+     OUT   PF_AGESA_DESTRUCTOR AgesaDestructor;    ///< The destructor function.
+  IN       AGESA_BUFFER_HANDLE BufferHandle;       ///< The buffer handle id for the service.
+} FUNCTION_PARAMS_INFO;
+
+/**
+ * All available services have their constructor info here.
+ */
+AGESA_STATUS
+AmdInitResetConstructor (
+  IN       AMD_CONFIG_PARAMS    *StdHeader,
+  IN       AMD_RESET_PARAMS     *AmdResetParams
+  );
+
+AGESA_STATUS
+AmdInitRecoveryInitializer (
+  IN       AMD_CONFIG_PARAMS   *StdHeader,
+  IN OUT   AMD_RECOVERY_PARAMS *AmdRecoveryParamsPtr
+  );
+
+AGESA_STATUS
+AmdInitEarlyInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_EARLY_PARAMS  *EarlyParams
+  );
+
+AGESA_STATUS
+AmdInitPostInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_POST_PARAMS *PostParamsPtr
+  );
+
+AGESA_STATUS
+AmdInitPostDestructor (
+  IN       AMD_CONFIG_PARAMS    *StdHeader,
+  IN       AMD_POST_PARAMS      *PostParamsPtr
+  );
+
+AGESA_STATUS
+AmdInitEnvInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_ENV_PARAMS *EnvParamsPtr
+  );
+
+AGESA_STATUS
+AmdInitMidInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_MID_PARAMS *MidParamsPtr
+  );
+
+AGESA_STATUS
+AmdInitLateInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_LATE_PARAMS *LateParamsPtr
+  );
+
+AGESA_STATUS
+AmdInitLateDestructor (
+  IN   AMD_CONFIG_PARAMS *StdHeader,
+  IN   AMD_LATE_PARAMS   *LateParamsPtr
+  );
+
+AGESA_STATUS
+AmdInitResumeInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_RESUME_PARAMS *ResumeParams
+  );
+
+AGESA_STATUS
+AmdInitResumeDestructor (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_RESUME_PARAMS *ResumeParams
+  );
+
+AGESA_STATUS
+AmdS3SaveInitializer (
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_S3SAVE_PARAMS *S3SaveParams
+  );
+
+AGESA_STATUS
+AmdS3SaveDestructor (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_S3SAVE_PARAMS *S3SaveParams
+  );
+
+AGESA_STATUS
+AmdS3LateRestoreInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AMD_S3LATE_PARAMS *S3LateParams
+  );
+
+AGESA_STATUS
+AmdLateRunApTaskInitializer (
+  IN       AMD_CONFIG_PARAMS *StdHeader,
+  IN OUT   AP_EXE_PARAMS     *AmdApExeParams
+  );
+#endif // _CREATE_STRUCT_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/S3RestoreState.c b/src/vendorcode/amd/agesa/f15/Proc/Common/S3RestoreState.c
new file mode 100644
index 0000000000..7b9a17d806
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/S3RestoreState.c
@@ -0,0 +1,442 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * S3 save/restore script
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:     AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "Porting.h"
+#include "AMD.h"
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "S3SaveState.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_S3RESTORESTATE_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern S3_SCRIPT_CONFIGURATION    OptionS3ScriptConfiguration;
+extern S3_DISPATCH_FUNCTION_ENTRY S3DispatchFunctionTable[];
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+AGESA_STATUS
+STATIC
+S3RestoreStateFromTable (
+  IN      S3_SAVE_TABLE_HEADER  *S3SaveTablePtr,
+  IN      AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader          Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptRestore (
+  IN      AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  return OptionS3ScriptConfiguration.Restore (StdHeader);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader          Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptRestoreStateStub (
+  IN      AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader          Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptRestoreState (
+  IN      AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  AGESA_STATUS          Status;
+  S3_SAVE_TABLE_HEADER  *S3SaveTablePtr;
+  Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+  if (Status != AGESA_SUCCESS) {
+    IDS_ERROR_TRAP;
+    return  AGESA_FATAL;
+  }
+  S3SaveTablePtr->Locked = TRUE;
+  Status = S3RestoreStateFromTable (S3SaveTablePtr, StdHeader);
+  return  Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] S3SaveTablePtr     Pointer to S3 Save Table
+ * @param[in] StdHeader          Pointer to standard header
+ */
+AGESA_STATUS
+STATIC
+S3RestoreStateFromTable (
+  IN      S3_SAVE_TABLE_HEADER  *S3SaveTablePtr,
+  IN      AMD_CONFIG_PARAMS     *StdHeader
+  )
+{
+  VOID                  *S3SaveTableRecordPtr;
+  PCI_ADDR              PciAddress;
+  UINTN                 Index;
+  S3SaveTableRecordPtr = (UINT8 *) S3SaveTablePtr + sizeof (S3_SAVE_TABLE_HEADER);
+  IDS_HDT_CONSOLE (S3_TRACE, "Start S3 restore\n", ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address);
+  while ((UINT8 *) S3SaveTableRecordPtr < ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset)) {
+    switch  (*(UINT16 *) S3SaveTableRecordPtr) {
+    case  SAVE_STATE_IO_WRITE_OPCODE:
+      S3_SCRIPT_DEBUG_CODE (
+        IDS_HDT_CONSOLE (S3_TRACE, "  S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address);
+        S3SaveDebugPrintHexArray (StdHeader, (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER), 1, ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+        IDS_HDT_CONSOLE (S3_TRACE, "\n");
+        );
+      LibAmdIoWrite (
+        ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+        (UINT16) ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address,
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER),
+        StdHeader
+        );
+      S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+                              sizeof (S3_WRITE_OP_HEADER) +
+                              LibAmdAccessWidth (((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+      break;
+    case  SAVE_STATE_IO_READ_WRITE_OPCODE:
+      S3_SCRIPT_DEBUG_CODE (
+        IDS_HDT_CONSOLE (S3_TRACE, "  S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_READ_WRITE_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+          1,
+          ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+          1,
+          ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        IDS_HDT_CONSOLE (S3_TRACE, "\n");
+        );
+      LibAmdIoRMW (
+        ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+        (UINT16) ((S3_READ_WRITE_OP_HEADER*) S3SaveTableRecordPtr)->Address,
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+        StdHeader
+        );
+      S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+                              sizeof (S3_READ_WRITE_OP_HEADER) +
+                              2 * LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+      break;
+    case  SAVE_STATE_MEM_WRITE_OPCODE:
+      S3_SCRIPT_DEBUG_CODE (
+        IDS_HDT_CONSOLE (S3_TRACE, "  S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address);
+        S3SaveDebugPrintHexArray (StdHeader, (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER), 1, ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+        IDS_HDT_CONSOLE (S3_TRACE, "\n");
+        );
+     LibAmdMemWrite (
+        ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+        ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address,
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER),
+        StdHeader
+        );
+      S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+                              sizeof (S3_WRITE_OP_HEADER) +
+                              LibAmdAccessWidth (((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+      break;
+    case  SAVE_STATE_MEM_READ_WRITE_OPCODE:
+      S3_SCRIPT_DEBUG_CODE (
+        IDS_HDT_CONSOLE (S3_TRACE, "  S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_READ_WRITE_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+          1,
+          ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+          1,
+          ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        IDS_HDT_CONSOLE (S3_TRACE, "\n");
+        );
+      LibAmdMemRMW (
+        ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+        ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address,
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER*) S3SaveTableRecordPtr)->Width),
+        StdHeader
+        );
+      S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+                              sizeof (S3_READ_WRITE_OP_HEADER) +
+                              2 * LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+      break;
+    case  SAVE_STATE_PCI_CONFIG_WRITE_OPCODE:
+      PciAddress.AddressValue = (UINT32) ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address;
+      S3_SCRIPT_DEBUG_CODE (
+        IDS_HDT_CONSOLE (S3_TRACE, "  S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address);
+        S3SaveDebugPrintHexArray (StdHeader, (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER), 1, ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+        IDS_HDT_CONSOLE (S3_TRACE, "\n");
+        );
+      LibAmdPciWrite (
+        ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+        PciAddress,
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER),
+        StdHeader
+        );
+      S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+                              sizeof (S3_WRITE_OP_HEADER) +
+                              LibAmdAccessWidth (((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+      break;
+    case  SAVE_STATE_PCI_CONFIG_READ_WRITE_OPCODE:
+      PciAddress.AddressValue = (UINT32) ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address;
+      S3_SCRIPT_DEBUG_CODE (
+        IDS_HDT_CONSOLE (S3_TRACE, "  S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_READ_WRITE_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+          1,
+          ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+          1,
+          ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        IDS_HDT_CONSOLE (S3_TRACE, "\n");
+        );
+      LibAmdPciRMW (
+        ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+        PciAddress,
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+        StdHeader
+        );
+      S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+                              sizeof (S3_READ_WRITE_OP_HEADER) +
+                              2 * LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+      break;
+    case  SAVE_STATE_STALL_OPCODE:
+      break;
+    case  SAVE_STATE_INFORMATION_OPCODE:
+      IDS_HDT_CONSOLE (S3_TRACE, "  S3 Restore: Info: [%s]\n", (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_INFO_OP_HEADER));
+      S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+                             sizeof (S3_INFO_OP_HEADER) +
+                             ((S3_INFO_OP_HEADER*) S3SaveTableRecordPtr)->Length;
+      break;
+    case  SAVE_STATE_DISPATCH_OPCODE:
+      S3_SCRIPT_DEBUG_CODE (
+        IDS_HDT_CONSOLE (S3_TRACE, "  S3 Restore: %s Function Id: 0x%02x, Context: ",  S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), ((S3_DISPATCH_OP_HEADER*) S3SaveTableRecordPtr)->FunctionId);
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (VOID*)((UINT8*) S3SaveTableRecordPtr + sizeof (S3_DISPATCH_OP_HEADER)),
+          ((S3_DISPATCH_OP_HEADER*) S3SaveTableRecordPtr)->Length,
+          AccessWidth8);
+        IDS_HDT_CONSOLE (S3_TRACE, "\n");
+        );
+      Index = 0;
+      while (S3DispatchFunctionTable[Index].FunctionId != 0) {
+        if (S3DispatchFunctionTable[Index].FunctionId == ((S3_DISPATCH_OP_HEADER*) S3SaveTableRecordPtr)->FunctionId) {
+          (S3DispatchFunctionTable[Index].Function) (
+            StdHeader,
+            ((S3_DISPATCH_OP_HEADER*) S3SaveTableRecordPtr)->Length,
+            (VOID*)((UINT8*) S3SaveTableRecordPtr + sizeof (S3_DISPATCH_OP_HEADER))
+            );
+          break;
+        }
+        Index++;
+      }
+      ASSERT (S3DispatchFunctionTable[Index].FunctionId != 0);
+      S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+                             sizeof (S3_DISPATCH_OP_HEADER) +
+                             ((S3_DISPATCH_OP_HEADER*) S3SaveTableRecordPtr)->Length;
+      break;
+
+    case  SAVE_STATE_IO_POLL_OPCODE:
+      S3_SCRIPT_DEBUG_CODE (
+        IDS_HDT_CONSOLE (S3_TRACE, "  S3 Restore: %s Address: 0x%04x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_POLL_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+          1,
+          ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+          1,
+          ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        )
+      LibAmdIoPoll (
+        ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+        (UINT16) ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Address,
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER*) S3SaveTableRecordPtr)->Width),
+        ((S3_POLL_OP_HEADER*) S3SaveTableRecordPtr)->Delay,
+        StdHeader
+        );
+      S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+                              sizeof (S3_POLL_OP_HEADER) +
+                              2 * LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+      break;
+    case  SAVE_STATE_MEM_POLL_OPCODE:
+      S3_SCRIPT_DEBUG_CODE (
+        IDS_HDT_CONSOLE (S3_TRACE, "  S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT32) ((S3_POLL_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+          1,
+          ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+          1,
+          ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        )
+      LibAmdMemPoll (
+        ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+        ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Address,
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+        ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Delay,
+        StdHeader
+        );
+      S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+                              sizeof (S3_POLL_OP_HEADER) +
+                              2 * LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+      break;
+    case  SAVE_STATE_PCI_CONFIG_POLL_OPCODE:
+      PciAddress.AddressValue = (UINT32) ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Address;
+      S3_SCRIPT_DEBUG_CODE (
+        IDS_HDT_CONSOLE (S3_TRACE, "  S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT32) ((S3_POLL_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+          1,
+          ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+        S3SaveDebugPrintHexArray (
+          StdHeader,
+          (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+          1,
+          ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width
+          );
+        )
+      LibAmdPciPoll (
+        ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+        PciAddress,
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+        (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+        ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Delay,
+        StdHeader
+        );
+      S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+                              sizeof (S3_POLL_OP_HEADER) +
+                              2 * LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+      break;
+    default:
+      IDS_HDT_CONSOLE (S3_TRACE, " ERROR!!! Invalid S3 restore opcode\n");
+      ASSERT (FALSE);
+      return AGESA_ERROR;
+    }
+  }
+  IDS_HDT_CONSOLE (S3_TRACE, " End S3 Restore \n");
+  return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/S3SaveState.c b/src/vendorcode/amd/agesa/f15/Proc/Common/S3SaveState.c
new file mode 100644
index 0000000000..4f93379ddc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/S3SaveState.c
@@ -0,0 +1,652 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * S3 save/restore script
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:     AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 55552 $   @e \$Date: 2011-06-22 09:31:58 -0600 (Wed, 22 Jun 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "Porting.h"
+#include "AMD.h"
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "S3SaveState.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_COMMON_S3SAVESTATE_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+extern S3_SCRIPT_CONFIGURATION OptionS3ScriptConfiguration;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+S3SaveStateExtendTableLenth (
+  IN       AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   S3_SAVE_TABLE_HEADER  **S3SaveTable
+  );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader          Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptInit (
+  IN      AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  return OptionS3ScriptConfiguration.Init (StdHeader);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader          Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptInitStateStub (
+  IN      AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader          Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptInitState (
+  IN      AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  AGESA_STATUS          Status;
+  ALLOCATE_HEAP_PARAMS  AllocHeapParams;
+
+  AllocHeapParams.RequestedBufferSize = S3_TABLE_LENGTH;
+  AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
+  if (Status == AGESA_SUCCESS) {
+    ((S3_SAVE_TABLE_HEADER *) AllocHeapParams.BufferPtr)->TableLength = S3_TABLE_LENGTH;
+    ((S3_SAVE_TABLE_HEADER *) AllocHeapParams.BufferPtr)->SaveOffset = sizeof (S3_SAVE_TABLE_HEADER);
+    ((S3_SAVE_TABLE_HEADER *) AllocHeapParams.BufferPtr)->Locked = FALSE;
+  }
+  return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in]     StdHeader          Pointer to standard header
+ * @param[in,out] S3SaveTable        S3 save table header
+ */
+AGESA_STATUS
+S3SaveStateExtendTableLenth (
+  IN       AMD_CONFIG_PARAMS     *StdHeader,
+  IN OUT   S3_SAVE_TABLE_HEADER  **S3SaveTable
+  )
+{
+  AGESA_STATUS          Status;
+  ALLOCATE_HEAP_PARAMS  AllocHeapParams;
+  VOID                  *TempBuffer;
+  UINT16                NewTableLength;
+  UINT16                CurrentTableLength;
+  //Allocate temporary buffer
+  NewTableLength = (*S3SaveTable)->TableLength + S3_TABLE_LENGTH_INCREMENT;
+  AllocHeapParams.RequestedBufferSize = NewTableLength;
+  AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE;
+  AllocHeapParams.Persist = StdHeader->HeapStatus;
+  Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
+  if (Status != AGESA_SUCCESS) {
+    return Status;
+  }
+  //Save current table length
+  CurrentTableLength = (*S3SaveTable)->TableLength;
+  //Update table length
+  (*S3SaveTable)->TableLength = NewTableLength;
+  //Copy S3 save toable to temporary location
+  LibAmdMemCopy (AllocHeapParams.BufferPtr, *S3SaveTable, CurrentTableLength, StdHeader);
+  //Save pointer to temp buffer
+  TempBuffer = AllocHeapParams.BufferPtr;
+  // Free original S3 save buffer
+  HeapDeallocateBuffer (AMD_S3_SCRIPT_SAVE_TABLE_HANDLE, StdHeader);
+
+  AllocHeapParams.RequestedBufferSize = NewTableLength;
+  AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE;
+  AllocHeapParams.Persist = StdHeader->HeapStatus;
+  Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
+  if (Status != AGESA_SUCCESS) {
+    return Status;
+  }
+  LibAmdMemCopy (AllocHeapParams.BufferPtr, TempBuffer, AllocHeapParams.RequestedBufferSize, StdHeader);
+  *S3SaveTable = (S3_SAVE_TABLE_HEADER*) AllocHeapParams.BufferPtr;
+  HeapDeallocateBuffer (AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE, StdHeader);
+  return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in]  StdHeader          Pointer to standard header
+ * @param[out] S3SaveTable        S3 save table header
+ */
+AGESA_STATUS
+S3ScriptGetS3SaveTable (
+  IN       AMD_CONFIG_PARAMS     *StdHeader,
+     OUT   S3_SAVE_TABLE_HEADER  **S3SaveTable
+  )
+{
+  AGESA_STATUS          Status;
+  LOCATE_HEAP_PTR       LocHeapParams;
+  LocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE;
+  Status = HeapLocateBuffer (&LocHeapParams, StdHeader);
+  if (Status != AGESA_SUCCESS) {
+    *S3SaveTable = NULL;
+    return Status;
+  }
+  *S3SaveTable = (S3_SAVE_TABLE_HEADER *) LocHeapParams.BufferPtr;
+  return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 write opcode
+ *
+ *
+ *
+ * @param[in] StdHeader          Pointer to standard header
+ * @param[in] OpCode             Operation opcode
+ * @param[in] Width              Width
+ * @param[in] Address            Register address
+ * @param[in] Count              Number of register writes
+ * @param[in] Buffer             Pointer to write buffer
+ */
+AGESA_STATUS
+S3SaveStateSaveWriteOp (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      UINT16              OpCode,
+  IN      ACCESS_WIDTH        Width,
+  IN      UINT64              Address,
+  IN      UINT32              Count,
+  IN      VOID                *Buffer
+  )
+{
+  S3_SAVE_TABLE_HEADER    *S3SaveTablePtr;
+  S3_WRITE_OP_HEADER      *SaveOffsetPtr;
+  UINT32                  OpCodeLength;
+  UINT32                  WidthLength;
+  AGESA_STATUS            Status;
+
+  Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+  if (Status != AGESA_SUCCESS) {
+    return Status;
+  }
+  if (S3SaveTablePtr->Locked) {
+    return  AGESA_UNSUPPORTED;
+  }
+  WidthLength = LibAmdAccessWidth (Width);
+  OpCodeLength = sizeof (S3_WRITE_OP_HEADER) + WidthLength * Count;
+  if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) {
+    Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr);
+    if (Status != AGESA_SUCCESS) {
+      return Status;
+    }
+  }
+  S3_SCRIPT_DEBUG_CODE (
+    IDS_HDT_CONSOLE (S3_TRACE, "  S3 Save: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, OpCode), Address);
+    S3SaveDebugPrintHexArray (StdHeader, Buffer, Count, Width);
+    IDS_HDT_CONSOLE (S3_TRACE, "\n");
+    );
+  SaveOffsetPtr = (S3_WRITE_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset);
+  SaveOffsetPtr->OpCode = OpCode;
+  SaveOffsetPtr->Width = Width;
+  SaveOffsetPtr->Count = Count;
+  SaveOffsetPtr->Address = Address;
+  LibAmdMemCopy (
+    (UINT8 *) SaveOffsetPtr + sizeof (S3_WRITE_OP_HEADER),
+    Buffer,
+    WidthLength * Count,
+    StdHeader
+    );
+  S3SaveTablePtr->SaveOffset += OpCodeLength;
+  return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 write opcode
+ *
+ *
+ *
+ * @param[in] StdHeader          Pointer to standard header
+ * @param[in] OpCode             Operation opcode
+ * @param[in] Width              Width
+ * @param[in] Address            Register address
+ * @param[in] Data               Pointer to data
+ * @param[in] DataMask           Pointer data mask
+ */
+AGESA_STATUS
+S3SaveStateSaveReadWriteOp (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      UINT16              OpCode,
+  IN      ACCESS_WIDTH        Width,
+  IN      UINT64              Address,
+  IN      VOID                *Data,
+  IN      VOID                *DataMask
+  )
+{
+
+  S3_SAVE_TABLE_HEADER    *S3SaveTablePtr;
+  S3_READ_WRITE_OP_HEADER *SaveOffsetPtr;
+  UINT32                  OpCodeLength;
+  UINT32                  WidthLength;
+  AGESA_STATUS            Status;
+
+  Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+  if (Status != AGESA_SUCCESS) {
+    return Status;
+  }
+  if (S3SaveTablePtr->Locked) {
+    return  AGESA_UNSUPPORTED;
+  }
+  WidthLength = LibAmdAccessWidth (Width);
+  OpCodeLength = sizeof (S3_READ_WRITE_OP_HEADER) + WidthLength * 2;
+  if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) {
+    Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr);
+    if (Status != AGESA_SUCCESS) {
+      return Status;
+    }
+  }
+  S3_SCRIPT_DEBUG_CODE (
+    IDS_HDT_CONSOLE (S3_TRACE, "  S3 Save: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, OpCode), Address);
+    S3SaveDebugPrintHexArray (StdHeader, Data, 1, Width);
+    IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+    S3SaveDebugPrintHexArray (StdHeader, DataMask, 1, Width);
+    IDS_HDT_CONSOLE (S3_TRACE, "\n");
+    );
+  SaveOffsetPtr = (S3_READ_WRITE_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset);
+  SaveOffsetPtr->OpCode = OpCode;
+  SaveOffsetPtr->Width = Width;
+  SaveOffsetPtr->Address = Address;
+
+  LibAmdMemCopy (
+    (UINT8 *) SaveOffsetPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+    Data,
+    WidthLength,
+    StdHeader
+    );
+  LibAmdMemCopy (
+    (UINT8 *) SaveOffsetPtr + sizeof (S3_READ_WRITE_OP_HEADER) + WidthLength,
+    DataMask,
+    WidthLength,
+    StdHeader
+    );
+  S3SaveTablePtr->SaveOffset += OpCodeLength;
+  return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 poll opcode
+ *
+ *
+ *
+ * @param[in] StdHeader          Pointer to standard header
+ * @param[in] OpCode             Operation opcode
+ * @param[in] Width              Width
+ * @param[in] Address            Register address
+ * @param[in] Data               Pointer to data
+ * @param[in] DataMask           Pointer data mask
+ * @param[in] Delay              Time delay for poll
+ */
+AGESA_STATUS
+S3SaveStateSavePollOp (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      UINT16              OpCode,
+  IN      ACCESS_WIDTH        Width,
+  IN      UINT64              Address,
+  IN      VOID                *Data,
+  IN      VOID                *DataMask,
+  IN      UINT64              Delay
+  )
+{
+
+  S3_SAVE_TABLE_HEADER    *S3SaveTablePtr;
+  S3_POLL_OP_HEADER       *SaveOffsetPtr;
+  UINT32                  OpCodeLength;
+  UINT32                  WidthLength;
+  AGESA_STATUS            Status;
+
+  Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+  if (Status != AGESA_SUCCESS) {
+    return Status;
+  }
+  if (S3SaveTablePtr->Locked) {
+    return  AGESA_UNSUPPORTED;
+  }
+  WidthLength = LibAmdAccessWidth (Width);
+  OpCodeLength = sizeof (S3_POLL_OP_HEADER) + WidthLength * 2;
+  if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) {
+    Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr);
+    if (Status != AGESA_SUCCESS) {
+      return Status;
+    }
+  }
+  S3_SCRIPT_DEBUG_CODE (
+    IDS_HDT_CONSOLE (S3_TRACE, "  S3 Save: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, OpCode), Address);
+    S3SaveDebugPrintHexArray (StdHeader, Data, 1, Width);
+    IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+    S3SaveDebugPrintHexArray (StdHeader, DataMask, 1, Width);
+    IDS_HDT_CONSOLE (S3_TRACE, "\n");
+    );
+  SaveOffsetPtr = (S3_POLL_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset);
+  SaveOffsetPtr->OpCode = OpCode;
+  SaveOffsetPtr->Width = Width;
+  SaveOffsetPtr->Delay = Delay;
+  SaveOffsetPtr->Address = Address;
+
+  LibAmdMemCopy (
+    (UINT8 *) SaveOffsetPtr + sizeof (S3_POLL_OP_HEADER),
+    Data,
+    WidthLength,
+    StdHeader
+    );
+  LibAmdMemCopy (
+    (UINT8 *) SaveOffsetPtr + sizeof (S3_POLL_OP_HEADER) + WidthLength,
+    DataMask,
+    WidthLength,
+    StdHeader
+    );
+  S3SaveTablePtr->SaveOffset += OpCodeLength;
+  return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 info opcode
+ *
+ *
+ *
+ * @param[in] StdHeader               Pointer to standard header
+ * @param[in] OpCode                  Operation opcode
+ * @param[in] InformationLength       Info length
+ * @param[in] Information             Pointer to information
+ */
+AGESA_STATUS
+S3SaveStateSaveInfoOp (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      UINT16              OpCode,
+  IN      UINT32              InformationLength,
+  IN      VOID                *Information
+  )
+{
+
+  S3_SAVE_TABLE_HEADER    *S3SaveTablePtr;
+  S3_INFO_OP_HEADER       *SaveOffsetPtr;
+  UINT32                  OpCodeLength;
+
+  AGESA_STATUS            Status;
+
+  Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+  if (Status != AGESA_SUCCESS) {
+    return Status;
+  }
+  if (S3SaveTablePtr->Locked) {
+    return  AGESA_UNSUPPORTED;
+  }
+  OpCodeLength = sizeof (S3_INFO_OP_HEADER) + InformationLength;
+  if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) {
+    Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr);
+    if (Status != AGESA_SUCCESS) {
+      return Status;
+    }
+  }
+  SaveOffsetPtr = (S3_INFO_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset);
+  SaveOffsetPtr->OpCode = OpCode;
+  SaveOffsetPtr->Length = InformationLength;
+  S3_SCRIPT_DEBUG_CODE (
+    IDS_HDT_CONSOLE (S3_TRACE, "  S3 Save: Info: %s \n", Information);
+    );
+  LibAmdMemCopy (
+    (UINT8 *) SaveOffsetPtr + sizeof (S3_INFO_OP_HEADER),
+    Information,
+    InformationLength,
+    StdHeader
+    );
+  S3SaveTablePtr->SaveOffset += OpCodeLength;
+  return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 dispatch opcode
+ *
+ *
+ *
+ * @param[in] StdHeader               Pointer to standard header
+ * @param[in] OpCode                  Operation opcode
+ * @param[in] FunctionId              Function ID
+ * @param[in] ContextLength           Context length
+ * @param[in] Context                 Pointer to Context
+ */
+AGESA_STATUS
+S3SaveStateSaveDispatchOp (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      UINT16              OpCode,
+  IN      UINT16              FunctionId,
+  IN      UINT16              ContextLength,
+  IN      VOID                *Context
+  )
+{
+
+  S3_SAVE_TABLE_HEADER    *S3SaveTablePtr;
+  S3_DISPATCH_OP_HEADER   *SaveOffsetPtr;
+  UINT32                  OpCodeLength;
+  AGESA_STATUS            Status;
+
+  Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+  if (Status != AGESA_SUCCESS) {
+    return Status;
+  }
+  if (S3SaveTablePtr->Locked) {
+    return  AGESA_UNSUPPORTED;
+  }
+  OpCodeLength = sizeof (S3_DISPATCH_OP_HEADER) + ContextLength;
+  if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) {
+    Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr);
+    if (Status != AGESA_SUCCESS) {
+      return Status;
+    }
+  }
+  S3_SCRIPT_DEBUG_CODE (
+    IDS_HDT_CONSOLE (S3_TRACE, "  S3 Save: %s Function Id: 0x%02x, Context: ",  S3SaveDebugOpcodeString (StdHeader, OpCode), FunctionId);
+    S3SaveDebugPrintHexArray (StdHeader, Context, ContextLength, AccessWidth8);
+    IDS_HDT_CONSOLE (S3_TRACE, "\n");
+    );
+  SaveOffsetPtr = (S3_DISPATCH_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset);
+  SaveOffsetPtr->OpCode = OpCode;
+  SaveOffsetPtr->Length = ContextLength;
+  SaveOffsetPtr->FunctionId = FunctionId;
+  LibAmdMemCopy (
+    (UINT8 *) SaveOffsetPtr + sizeof (S3_DISPATCH_OP_HEADER),
+    Context,
+    ContextLength,
+    StdHeader
+    );
+
+  S3SaveTablePtr->SaveOffset += OpCodeLength;
+  return AGESA_SUCCESS;
+}
+
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 debug support
+ *
+ *
+ *
+ * @param[in] StdHeader               Pointer to standard header
+ * @param[in] Op                      Opcode
+ */
+CHAR8*
+S3SaveDebugOpcodeString (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      UINT16              Op
+  )
+{
+  switch (Op) {
+  case SAVE_STATE_IO_WRITE_OPCODE:
+    return (CHAR8*)"IO WR";
+  case SAVE_STATE_IO_READ_WRITE_OPCODE:
+    return (CHAR8*)"IO RD/WR";
+  case SAVE_STATE_IO_POLL_OPCODE:
+    return (CHAR8*)"IO POLL";
+  case SAVE_STATE_MEM_WRITE_OPCODE:
+    return (CHAR8*)"MEM WR";
+  case SAVE_STATE_MEM_READ_WRITE_OPCODE:
+    return (CHAR8*)"MEM RD/WR";
+  case SAVE_STATE_MEM_POLL_OPCODE:
+    return (CHAR8*)"MEM POLL";
+  case SAVE_STATE_PCI_CONFIG_WRITE_OPCODE:
+    return (CHAR8*)"PCI WR";
+  case SAVE_STATE_PCI_CONFIG_READ_WRITE_OPCODE:
+    return (CHAR8*)"PCI RD/WR";
+  case SAVE_STATE_PCI_CONFIG_POLL_OPCODE:
+    return (CHAR8*)"PCI POLL";
+  case SAVE_STATE_STALL_OPCODE:
+    return (CHAR8*)"STALL";
+  case SAVE_STATE_DISPATCH_OPCODE:
+    return (CHAR8*)"DISPATCH";
+  default:
+    IDS_ERROR_TRAP;
+  }
+  return (CHAR8*)"!!! Unrecognize opcode !!!";
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 debug support
+ *
+ *
+ *
+ * @param[in] StdHeader               Pointer to standard header
+ * @param[in] Array                   Array
+ * @param[in] Count                   Count of element in array
+ * @param[in] Width                   Array Element width
+ */
+VOID
+S3SaveDebugPrintHexArray (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      VOID                *Array,
+  IN      UINT32              Count,
+  IN      ACCESS_WIDTH        Width
+  )
+{
+  UINTN  Index;
+
+  for (Index = 0; Index < Count; Index++) {
+    switch (Width) {
+    case AccessWidth8:
+    case AccessS3SaveWidth8:
+      IDS_HDT_CONSOLE (S3_TRACE, "0x%02x", *((UINT8*)Array + Index));
+      break;
+    case AccessWidth16:
+    case AccessS3SaveWidth16:
+      IDS_HDT_CONSOLE (S3_TRACE, "0x%04x", *((UINT16*)Array + Index));
+      break;
+    case AccessWidth32:
+    case AccessS3SaveWidth32:
+      IDS_HDT_CONSOLE (S3_TRACE, "0x%08x", *((UINT32*)Array + Index));
+      break;
+    case AccessWidth64:
+    case AccessS3SaveWidth64:
+      IDS_HDT_CONSOLE (S3_TRACE, "0x%08x%08x", ((UINT32*) ((UINT64*)Array + Index)[1], ((UINT32*) ((UINT64*)Array + Index))[0]));
+      break;
+    default:
+      IDS_ERROR_TRAP;
+    }
+    if (Index < (Count - 1)) {
+      IDS_HDT_CONSOLE (S3_TRACE, ", ");
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Common/S3SaveState.h b/src/vendorcode/amd/agesa/f15/Proc/Common/S3SaveState.h
new file mode 100644
index 0000000000..ecfa6af28e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Common/S3SaveState.h
@@ -0,0 +1,361 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various PCI service routines.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:     AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 51711 $   @e \$Date: 2011-04-27 00:23:04 -0600 (Wed, 27 Apr 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _S3SAVESTATE_H_
+#define _S3SAVESTATE_H_
+
+#pragma pack (push, 1)
+
+#ifndef S3_SCRIPT_DEBUG_CODE
+  #define S3_SCRIPT_DEBUG_CODE(Code) Code
+#endif
+
+/// Dispatch function ID repository
+typedef enum {
+  NbSmuIndirectWriteS3Script_ID = 1,           ///< GNB SMU service request function ID.
+  NbSmuServiceRequestS3Script_ID,              ///< GNB PCIe late restore function ID.
+  PcieLateRestoreS3Script_ID,                  ///< GNB SMU indirect write.
+  GnbSmuServiceRequestV4S3Script_ID,           ///< SMU service request
+  GnbLibStallS3Script_ID,                      ///< Stall request
+  PcieLateRestoreTNS3Script_ID,                ///< GNB PCIe late restore TN
+  PcieLateRestoreKMS3Script_ID,                ///< GNB PCIe late restore KM
+} S3_DISPATCH_FUNCTION_ID;
+
+#define SAVE_STATE_IO_WRITE_OPCODE              0x00
+#define SAVE_STATE_IO_READ_WRITE_OPCODE         0x01
+#define SAVE_STATE_MEM_WRITE_OPCODE             0x02
+#define SAVE_STATE_MEM_READ_WRITE_OPCODE        0x03
+#define SAVE_STATE_PCI_CONFIG_WRITE_OPCODE      0x04
+#define SAVE_STATE_PCI_CONFIG_READ_WRITE_OPCODE 0x05
+#define SAVE_STATE_STALL_OPCODE                 0x07
+#define SAVE_STATE_INFORMATION_OPCODE           0x0A
+#define SAVE_STATE_IO_POLL_OPCODE               0x0D
+#define SAVE_STATE_MEM_POLL_OPCODE              0x0E
+#define SAVE_STATE_PCI_CONFIG_POLL_OPCODE       0x0F
+#define SAVE_STATE_DISPATCH_OPCODE              0x20
+#define SAVE_STATE_BREAKPOINT_OPCODE            0x21
+
+
+#define S3_TABLE_LENGTH             8 * 1024
+#define S3_TABLE_LENGTH_INCREMENT   1 * 1024
+
+/// S3 Save Table
+typedef struct {
+  UINT16                      TableLength;        ///< Table Length
+  UINT32                      SaveOffset;         ///< Save Location
+  BOOLEAN                     Locked;             ///< Locked
+} S3_SAVE_TABLE_HEADER;
+
+/// S3 write operation header
+typedef struct {
+  UINT16                      OpCode;             ///< Opcode
+  ACCESS_WIDTH                Width;              ///< Data width (byte, word, dword)
+  UINT64                      Address;            ///< Register address
+  UINT32                      Count;              ///< Write count
+} S3_WRITE_OP_HEADER;
+
+/// S3 Read and Write Operation header
+typedef struct {
+  UINT16                      OpCode;             ///< Opcode
+  ACCESS_WIDTH                Width;              ///< Data width (byte, word, dword)
+  UINT64                      Address;            ///< Register Address
+} S3_READ_WRITE_OP_HEADER;
+
+/// S3 Poll operation header
+typedef struct {
+  UINT16                      OpCode;             ///< Opcode
+  ACCESS_WIDTH                Width;              ///< Data width (byte, word, dword)
+  UINT64                      Address;            ///< Register address
+  UINT64                      Delay;              ///< Time delay
+} S3_POLL_OP_HEADER;
+
+/// Information operation header
+typedef struct {
+  UINT16                      OpCode;             ///< Opcode
+  UINT32                      Length;             ///< Length of info
+} S3_INFO_OP_HEADER;
+
+/// Dispatch operation header
+typedef struct {
+  UINT16                      OpCode;             ///< Opcode
+  UINT16                      FunctionId;         ///< Function ID
+  UINT16                      Length;             ///< Length in bytes of the context
+} S3_DISPATCH_OP_HEADER;
+
+
+typedef VOID S3_DISPATCH_FUNCTION (
+  IN      AMD_CONFIG_PARAMS     *StdHeader,
+  IN      UINT16                ContextLength,
+  IN      VOID                  *Context
+  );
+
+/// Dispatch function table entry
+typedef struct {
+  UINT16                        FunctionId;         ///<Function ID
+  S3_DISPATCH_FUNCTION          *Function;          ///<Function pointer
+} S3_DISPATCH_FUNCTION_ENTRY;
+
+typedef AGESA_STATUS (*S3_SCRIPT_INIT) (
+  IN      AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+typedef AGESA_STATUS (*S3_SCRIPT_RESTORE) (
+  IN      AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+/// S3 Script Configuration
+typedef struct {
+  S3_SCRIPT_INIT              Init;               ///< Script initialization
+  S3_SCRIPT_RESTORE           Restore;            ///< Script restore
+} S3_SCRIPT_CONFIGURATION;
+
+AGESA_STATUS
+S3ScriptInit (
+  IN      AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+AGESA_STATUS
+S3ScriptInitState (
+  IN      AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+AGESA_STATUS
+S3ScriptInitStateStub (
+  IN      AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+AGESA_STATUS
+S3ScriptRestore (
+  IN      AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+AGESA_STATUS
+S3ScriptRestoreState (
+  IN      AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+AGESA_STATUS
+S3ScriptRestoreStateStub (
+  IN      AMD_CONFIG_PARAMS     *StdHeader
+  );
+
+AGESA_STATUS
+S3ScriptGetS3SaveTable (
+  IN      AMD_CONFIG_PARAMS     *StdHeader,
+  OUT     S3_SAVE_TABLE_HEADER  **S3SaveTable
+  );
+
+VOID
+S3SaveDebugPrintHexArray (
+  IN      AMD_CONFIG_PARAMS     *StdHeader,
+  IN      VOID                  *Array,
+  IN      UINT32                Count,
+  IN      ACCESS_WIDTH          Width
+  );
+
+CHAR8*
+S3SaveDebugOpcodeString (
+  IN      AMD_CONFIG_PARAMS     *StdHeader,
+  IN      UINT16                Op
+  );
+
+AGESA_STATUS
+S3SaveStateSaveWriteOp (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      UINT16              OpCode,
+  IN      ACCESS_WIDTH        Width,
+  IN      UINT64              Address,
+  IN      UINT32              Count,
+  IN      VOID                *Buffer
+  );
+
+AGESA_STATUS
+S3SaveStateSaveReadWriteOp (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      UINT16              OpCode,
+  IN      ACCESS_WIDTH        Width,
+  IN      UINT64              Address,
+  IN      VOID                *Data,
+  IN      VOID                *DataMask
+  );
+
+AGESA_STATUS
+S3SaveStateSavePollOp (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      UINT16              OpCode,
+  IN      ACCESS_WIDTH        Width,
+  IN      UINT64              Address,
+  IN      VOID                *Data,
+  IN      VOID                *DataMask,
+  IN      UINT64              Delay
+  );
+
+AGESA_STATUS
+S3SaveStateSaveInfoOp (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      UINT16              OpCode,
+  IN      UINT32              InformationLength,
+  IN      VOID                *Information
+  );
+
+AGESA_STATUS
+S3SaveStateSaveDispatchOp (
+  IN      AMD_CONFIG_PARAMS   *StdHeader,
+  IN      UINT16              OpCode,
+  IN      UINT16              FunctionId,
+  IN      UINT16              ContextLength,
+  IN      VOID                *Context
+  );
+
+//PCI write
+#define S3_SAVE_PCI_WRITE(StdHeader, Address, Width, DataPtr) \
+  S3SaveStateSaveWriteOp (  \
+    StdHeader,  \
+    SAVE_STATE_PCI_CONFIG_WRITE_OPCODE,  \
+    Width,  \
+    Address.AddressValue, \
+    1,  \
+    DataPtr  \
+    )
+
+//PCI read modify write
+#define S3_SAVE_PCI_RMW (StdHeader, Address, Width, DataPtr, DataMaskPtr) \
+  S3SaveStateSaveWriteOp (  \
+    StdHeader,  \
+    SAVE_STATE_PCI_CONFIG_READ_WRITE_OPCODE,  \
+    Width,  \
+    Address.AddressValue, \
+    DataPtr,  \
+    DataMask  \
+    )
+
+//PCI read modify write
+#define S3_SAVE_PCI_POLL(StdHeader, Address, Width, DataPtr, DataMaskPtr, Delay) \
+  S3SaveStateSavePollOp (  \
+    StdHeader,  \
+    SAVE_STATE_PCI_CONFIG_POLL_OPCODE,  \
+    Width,  \
+    Address.AddressValue, \
+    DataPtr,  \
+    DataMask,  \
+    Delay  \
+    )
+
+//Memory/MMIO write
+#define S3_SAVE_MEM_WRITE(StdHeader, Address, Width, DataPtr) \
+  S3SaveStateSaveWriteOp (  \
+    StdHeader,  \
+    SAVE_STATE_MEM_WRITE_OPCODE,  \
+    Width,  \
+    Address, \
+    1,  \
+    DataPtr  \
+    )
+
+//Memory/MMIO read modify write
+#define S3_SAVE_MEM_RMW(StdHeader, Address, Width, DataPtr, DataMaskPtr) \
+  S3SaveStateSaveWriteOp (  \
+    StdHeader,  \
+    SAVE_STATE_MEM_READ_WRITE_OPCODE,  \
+    Width,  \
+    Address, \
+    DataPtr,  \
+    DataMask  \
+    )
+
+//Memory/MMIO read modify write
+#define S3_SAVE_MEM_POLL(StdHeader, Address, Width, DataPtr, DataMaskPtr, Delay) \
+  S3SaveStateSavePollOp (  \
+    StdHeader,  \
+    SAVE_STATE_MEM_POLL_OPCODE,  \
+    Width,  \
+    Address, \
+    DataPtr,  \
+    DataMask,  \
+    Delay \
+    )
+
+// I/O write
+#define S3_SAVE_IO_WRITE(StdHeader, Address, Width, DataPtr) \
+  S3SaveStateSaveWriteOp (  \
+    StdHeader,  \
+    SAVE_STATE_IO_WRITE_OPCODE,  \
+    Width,  \
+    Address, \
+    1,  \
+    DataPtr  \
+    )
+
+// Save information
+#define S3_SAVE_INFORMATION(StdHeader, InformationLength, Information) \
+  S3SaveStateSaveInfoOp (  \
+    StdHeader,  \
+    SAVE_STATE_INFORMATION_OPCODE,  \
+    InformationLength,  \
+    Information \
+    )
+
+// Save information string S3_SAVE_INFORMATION_STRING (StdHeader, "Message")
+#define S3_SAVE_INFORMATION_STRING(StdHeader, Information) \
+  S3SaveStateSaveInfoOp (  \
+    StdHeader,  \
+    SAVE_STATE_INFORMATION_OPCODE,  \
+    sizeof (Information),  \
+    Information \
+    )
+
+// Save dispatch function
+#define S3_SAVE_DISPATCH(StdHeader, FunctionId, ContextLength, Context) \
+  S3SaveStateSaveDispatchOp (  \
+    StdHeader,  \
+    SAVE_STATE_DISPATCH_OPCODE,  \
+    FunctionId, \
+    ContextLength,  \
+    Context \
+    )
+
+#pragma pack (pop)
+#endif
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbCoherentFam10.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbCoherentFam10.c
new file mode 100644
index 0000000000..aeee0e3565
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbCoherentFam10.c
@@ -0,0 +1,163 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Coherent Family 10h Routines.
+ *
+ * Coherent feature Northbridge implementation specific to Family 10h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbCoherentFam10.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FAM10_HTNBCOHERENTFAM10_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return whether the current configuration exceeds the capability.
+ *
+ * @HtNbMethod{::F_IS_EXCEEDED_CAPABLE}.
+ *
+ * Get Node capability and update the minimum supported system capability.
+ *
+ * @param[in]     Node     the Node
+ * @param[in]     State    sysMpCap (updated) and NodesDiscovered
+ * @param[in]     Nb       this northbridge
+ *
+ * @retval        TRUE     system is not capable of current config.
+ * @retval        FALSE    system is capable of current config.
+ */
+BOOLEAN
+Fam10IsExceededCapable (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Temp;
+  UINT8 MaxNodes;
+  PCI_ADDR Reg;
+
+  ASSERT (Node < MAX_NODES);
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_CAPABILITY_3XE8);
+
+  LibAmdPciReadBits (Reg, 18, 16, &Temp, Nb->ConfigHandle);
+
+  if (Temp != 0) {
+    MaxNodes = (UINT8) (1 << (~Temp & 0x3));  // That is, 1, 2, 4, or 8
+  } else {
+    MaxNodes = 8;
+  }
+  if (State->SysMpCap > MaxNodes) {
+    State->SysMpCap = MaxNodes;
+  }
+  // Note since sysMpCap is one based and NodesDiscovered is zero based, equal returns true
+  //
+  return ((BOOLEAN) (State->SysMpCap <= State->NodesDiscovered));
+}
+
+/**
+ * Stop a link, so that it is isolated from a connected device.
+ *
+ * @HtNbMethod{::F_STOP_LINK}.
+ *
+ * Use is for fatal incompatible configurations, or for user interface
+ * request to power off a link (IgnoreLink, SkipRegang).
+ * Set ConnDly to make the power effective at the warm reset.
+ * Set XMT and RCV off.
+ *
+ * @param[in] Node   the node to stop a link on.
+ * @param[in] Link   the link to stop.
+ * @param[in] State  access to special routine for writing link control register
+ * @param[in] Nb     this northbridge.
+ */
+VOID
+Fam10StopLink (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR Reg;
+
+  // Set ConnDly
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_LINK_GLOBAL_EXT_CONTROL_0x16C);
+  Temp = 1;
+  LibAmdPciWriteBits (Reg, 8, 8, &Temp, Nb->ConfigHandle);
+  // Set TransOff and EndOfChain
+  Reg = Nb->MakeLinkBase (Node, Link, Nb);
+  Reg.Address.Register += HTHOST_LINK_CONTROL_REG;
+  Temp = 3;
+  State->HtFeatures->SetHtControlRegisterBits (Reg, 7, 6, &Temp, State);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbCoherentFam10.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbCoherentFam10.h
new file mode 100644
index 0000000000..4098b226a7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbCoherentFam10.h
@@ -0,0 +1,67 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Coherent Family 10h specific Routines.
+ *
+ * Coherent feature Northbridge implementation specific to Family 10h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/**
+ * Return whether the current configuration exceeds the capability.
+ *
+ */
+BOOLEAN
+Fam10IsExceededCapable (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Stop a link, so that it is isolated from a connected device.
+ */
+VOID
+Fam10StopLink (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbFam10.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbFam10.c
new file mode 100644
index 0000000000..60949c4224
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbFam10.c
@@ -0,0 +1,485 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initializers for Family 10h northbridge support.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionsHt.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "CommonReturns.h"
+#include "htNbCoherent.h"
+#include "htNbCoherentFam10.h"
+#include "htNbNonCoherent.h"
+#include "htNbNonCoherentFam10.h"
+#include "htNbOptimization.h"
+#include "htNbOptimizationFam10.h"
+#include "htNbSystemFam10.h"
+#include "htNbUtilities.h"
+#include "htNbUtilitiesFam10.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FAM10_HTNBFAM10_FILECODE
+
+extern OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***               FAMILY/NORTHBRIDGE SPECIFIC FUNCTIONS                 ***
+ ***************************************************************************/
+
+/**
+ * Map Northbridge links to package links for Family 10h, Rev D, multi-module.
+ *
+ * Unfortunately, there is no way to do this except to type the BKDG text into this data structure.
+ * Note that there is one entry per package external sublink and each connected internal link.
+ */
+CONST PACKAGE_HTLINK_MAP_ITEM ROMDATA HtFam10RevDPackageLinkMap[] =
+{
+  {0, 0, 0},        ///< Module zero, link 0: package link 0
+  {4, 0, 4},        ///< Module zero, link 4: package link 4
+  {0, 1, 1},        ///< Module one,  link 0: package link 1
+  {4, 1, 5},        ///< Module one,  link 4: package link 5
+  {3, 0, 2},        ///< Module zero, link 3: package link 2
+  {7, 0, 6},        ///< Module zero, link 7: package link 6
+  {2, 0, 3},        ///< Module zero, link 2: package link 3
+  {1, 1, 7},        ///< Module one,  link 1: package link 7
+  {1, 0, HT_LIST_MATCH_INTERNAL_LINK_0},        ///< Internal Link
+  {5, 0, HT_LIST_MATCH_INTERNAL_LINK_1},        ///< Internal Link
+  {6, 0, HT_LIST_MATCH_INTERNAL_LINK_2},        ///< Internal Link
+  {2, 1, HT_LIST_MATCH_INTERNAL_LINK_0},        ///< Internal Link
+  {6, 1, HT_LIST_MATCH_INTERNAL_LINK_1},        ///< Internal Link
+  {5, 1, HT_LIST_MATCH_INTERNAL_LINK_2},        ///< Internal Link
+  {HT_LIST_TERMINAL, HT_LIST_TERMINAL, HT_LIST_TERMINAL}, ///< End
+};
+
+/**
+ * A default Ignore Link list for rev D to power off the 3rd internal sublink.
+ */
+STATIC CONST IGNORE_LINK ROMDATA Fam10RevDIgnoreLinkList[] = {
+  {HT_LIST_MATCH_ANY, HT_LIST_MATCH_INTERNAL_LINK_2, POWERED_OFF},
+  {HT_LIST_TERMINAL}
+};
+
+/**
+ * Initial construction data for Family 10h North Bridge, default, full features.
+ */
+CONST NORTHBRIDGE ROMDATA HtFam10NbDefault =
+{
+  8,
+  WriteRoutingTable,
+  WriteNodeID,
+  ReadDefaultLink,
+  EnableRoutingTables,
+  DisableRoutingTables,
+  VerifyLinkIsCoherent,
+  ReadToken,
+  WriteToken,
+  WriteFullRoutingTable,
+  IsIllegalTypeMix,
+  Fam10IsExceededCapable,
+  Fam10StopLink,
+  (PF_HANDLE_SPECIAL_LINK_CASE)CommonReturnFalse,
+  HandleSpecialNodeCase,
+  ReadSouthbridgeLink,
+  VerifyLinkIsNonCoherent,
+  Fam10SetConfigAddrMap,
+  Fam10NorthBridgeFreqMask,
+  GatherLinkFeatures,
+  SetLinkRegang,
+  SetLinkFrequency,
+  SetLinkUnitIdClumping,
+  Fam10WriteTrafficDistribution,
+  Fam10WriteLinkPairDistribution,
+  (PF_WRITE_VICTIM_DISTRIBUTION)CommonVoid,
+  Fam10BufferOptimizations,
+  Fam10GetNumCoresOnNode,
+  SetTotalNodesAndCores,
+  GetNodeCount,
+  LimitNodes,
+  ReadTrueLinkFailStatus,
+  Fam10GetNextLink,
+  GetPackageLink,
+  MakeLinkBase,
+  Fam10GetModuleInfo,
+  Fam10PostMailbox,
+  Fam10RetrieveMailbox,
+  Fam10GetSocket,
+  (PF_GET_ENABLED_COMPUTE_UNITS)CommonReturnZero8,
+  (PF_GET_DUALCORE_COMPUTE_UNITS)CommonReturnZero8,
+  0x00000001,
+  0x00000200,
+  18,
+  TRUE,
+  TRUE,
+  ((AMD_FAMILY_10) & ~(AMD_FAMILY_10_HY | AMD_FAMILY_10_PH)),
+  NULL,
+  0,
+  NULL,
+  MakeKey,
+  NULL
+};
+
+/**
+ * Initial construction data for Family 10h North Bridge, default, full features.
+ */
+CONST NORTHBRIDGE ROMDATA HtFam10RevDNbDefault =
+{
+  8,
+  WriteRoutingTable,
+  WriteNodeID,
+  ReadDefaultLink,
+  EnableRoutingTables,
+  DisableRoutingTables,
+  VerifyLinkIsCoherent,
+  ReadToken,
+  WriteToken,
+  WriteFullRoutingTable,
+  IsIllegalTypeMix,
+  Fam10IsExceededCapable,
+  Fam10StopLink,
+  (PF_HANDLE_SPECIAL_LINK_CASE)CommonReturnFalse,
+  HandleSpecialNodeCase,
+  ReadSouthbridgeLink,
+  VerifyLinkIsNonCoherent,
+  Fam10SetConfigAddrMap,
+  Fam10RevDNorthBridgeFreqMask,
+  GatherLinkFeatures,
+  SetLinkRegang,
+  SetLinkFrequency,
+  SetLinkUnitIdClumping,
+  Fam10WriteTrafficDistribution,
+  Fam10WriteLinkPairDistribution,
+  (PF_WRITE_VICTIM_DISTRIBUTION)CommonVoid,
+  Fam10RevDBufferOptimizations,
+  Fam10RevDGetNumCoresOnNode,
+  SetTotalNodesAndCores,
+  GetNodeCount,
+  LimitNodes,
+  ReadTrueLinkFailStatus,
+  Fam10GetNextLink,
+  GetPackageLink,
+  MakeLinkBase,
+  Fam10GetModuleInfo,
+  Fam10PostMailbox,
+  Fam10RetrieveMailbox,
+  Fam10RevDGetSocket,
+  (PF_GET_ENABLED_COMPUTE_UNITS)CommonReturnZero8,
+  (PF_GET_DUALCORE_COMPUTE_UNITS)CommonReturnZero8,
+  0x00000001,
+  0x00000200,
+  18,
+  TRUE,
+  TRUE,
+  (AMD_FAMILY_10_HY),
+  (PACKAGE_HTLINK_MAP) &HtFam10RevDPackageLinkMap,
+  0,
+  (IGNORE_LINK *)&Fam10RevDIgnoreLinkList,
+  MakeKey,
+  NULL
+};
+
+/**
+ * Initial construction data for Family 10h North Bridge, default, full features.
+ */
+CONST NORTHBRIDGE ROMDATA HtFam10RevENbDefault =
+{
+  8,
+  WriteRoutingTable,
+  WriteNodeID,
+  ReadDefaultLink,
+  EnableRoutingTables,
+  DisableRoutingTables,
+  VerifyLinkIsCoherent,
+  ReadToken,
+  WriteToken,
+  WriteFullRoutingTable,
+  IsIllegalTypeMix,
+  Fam10IsExceededCapable,
+  Fam10StopLink,
+  (PF_HANDLE_SPECIAL_LINK_CASE)CommonReturnFalse,
+  HandleSpecialNodeCase,
+  ReadSouthbridgeLink,
+  VerifyLinkIsNonCoherent,
+  Fam10SetConfigAddrMap,
+  Fam10NorthBridgeFreqMask,
+  GatherLinkFeatures,
+  SetLinkRegang,
+  SetLinkFrequency,
+  SetLinkUnitIdClumping,
+  Fam10WriteTrafficDistribution,
+  Fam10WriteLinkPairDistribution,
+  (PF_WRITE_VICTIM_DISTRIBUTION)CommonVoid,
+  Fam10BufferOptimizations,
+  Fam10RevDGetNumCoresOnNode,
+  SetTotalNodesAndCores,
+  GetNodeCount,
+  LimitNodes,
+  ReadTrueLinkFailStatus,
+  Fam10GetNextLink,
+  GetPackageLink,
+  MakeLinkBase,
+  Fam10GetModuleInfo,
+  Fam10PostMailbox,
+  Fam10RetrieveMailbox,
+  Fam10GetSocket,
+  (PF_GET_ENABLED_COMPUTE_UNITS)CommonReturnZero8,
+  (PF_GET_DUALCORE_COMPUTE_UNITS)CommonReturnZero8,
+  0x00000001,
+  0x00000200,
+  18,
+  TRUE,
+  TRUE,
+  (AMD_FAMILY_10_PH),
+  NULL,
+  0,
+  NULL,
+  MakeKey,
+  NULL
+};
+
+/**
+ * Initial construction data for Family 10h North Bridge, for non-coherent only builds.
+ */
+CONST NORTHBRIDGE ROMDATA HtFam10NbNonCoherentOnly =
+{
+  8,
+  (PF_WRITE_ROUTING_TABLE)CommonVoid,
+  (PF_WRITE_NODEID)CommonVoid,
+  (PF_READ_DEFAULT_LINK)CommonReturnZero8,
+  (PF_ENABLE_ROUTING_TABLES)CommonVoid,
+  (PF_DISABLE_ROUTING_TABLES)CommonVoid,
+  (PF_VERIFY_LINK_IS_COHERENT)CommonReturnFalse,
+  (PF_READ_TOKEN)CommonReturnZero8,
+  (PF_WRITE_TOKEN)CommonVoid,
+  (PF_WRITE_FULL_ROUTING_TABLE)CommonVoid,
+  (PF_IS_ILLEGAL_TYPE_MIX)CommonReturnFalse,
+  (PF_IS_EXCEEDED_CAPABLE)CommonReturnFalse,
+  (PF_STOP_LINK)CommonVoid,
+  (PF_HANDLE_SPECIAL_LINK_CASE)CommonReturnFalse,
+  (PF_HANDLE_SPECIAL_NODE_CASE)CommonReturnFalse,
+  ReadSouthbridgeLink,
+  VerifyLinkIsNonCoherent,
+  Fam10SetConfigAddrMap,
+  Fam10NorthBridgeFreqMask,
+  GatherLinkFeatures,
+  SetLinkRegang,
+  SetLinkFrequency,
+  SetLinkUnitIdClumping,
+  (PF_WRITE_TRAFFIC_DISTRIBUTION)CommonVoid,
+  (PF_WRITE_LINK_PAIR_DISTRIBUTION)CommonVoid,
+  (PF_WRITE_VICTIM_DISTRIBUTION)CommonVoid,
+  Fam10BufferOptimizations,
+  Fam10GetNumCoresOnNode,
+  SetTotalNodesAndCores,
+  GetNodeCount,
+  LimitNodes,
+  ReadTrueLinkFailStatus,
+  Fam10GetNextLink,
+  GetPackageLink,
+  MakeLinkBase,
+  Fam10GetModuleInfo,
+  Fam10PostMailbox,
+  Fam10RetrieveMailbox,
+  Fam10GetSocket,
+  (PF_GET_ENABLED_COMPUTE_UNITS)CommonReturnZero8,
+  (PF_GET_DUALCORE_COMPUTE_UNITS)CommonReturnZero8,
+  0x00000001,
+  0x00000200,
+  18,
+  TRUE,
+  TRUE,
+  ((AMD_FAMILY_10) & ~(AMD_FAMILY_10_HY | AMD_FAMILY_10_PH)),
+  NULL,
+  0,
+  NULL,
+  MakeKey,
+  NULL
+};
+
+/**
+ * Initial construction data for Family 10h North Bridge, for RevD compatible non-coherent only builds.
+ */
+CONST NORTHBRIDGE ROMDATA HtFam10RevDNbNonCoherentOnly =
+{
+  8,
+  (PF_WRITE_ROUTING_TABLE)CommonVoid,
+  (PF_WRITE_NODEID)CommonVoid,
+  (PF_READ_DEFAULT_LINK)CommonReturnZero8,
+  (PF_ENABLE_ROUTING_TABLES)CommonVoid,
+  (PF_DISABLE_ROUTING_TABLES)CommonVoid,
+  (PF_VERIFY_LINK_IS_COHERENT)CommonReturnFalse,
+  (PF_READ_TOKEN)CommonReturnZero8,
+  (PF_WRITE_TOKEN)CommonVoid,
+  (PF_WRITE_FULL_ROUTING_TABLE)CommonVoid,
+  (PF_IS_ILLEGAL_TYPE_MIX)CommonReturnFalse,
+  (PF_IS_EXCEEDED_CAPABLE)CommonReturnFalse,
+  (PF_STOP_LINK)CommonVoid,
+  (PF_HANDLE_SPECIAL_LINK_CASE)CommonReturnFalse,
+  (PF_HANDLE_SPECIAL_NODE_CASE)CommonReturnFalse,
+  ReadSouthbridgeLink,
+  VerifyLinkIsNonCoherent,
+  Fam10SetConfigAddrMap,
+  Fam10RevDNorthBridgeFreqMask,
+  GatherLinkFeatures,
+  SetLinkRegang,
+  SetLinkFrequency,
+  SetLinkUnitIdClumping,
+  (PF_WRITE_TRAFFIC_DISTRIBUTION)CommonVoid,
+  (PF_WRITE_LINK_PAIR_DISTRIBUTION)CommonVoid,
+  (PF_WRITE_VICTIM_DISTRIBUTION)CommonVoid,
+  Fam10BufferOptimizations,
+  Fam10RevDGetNumCoresOnNode,
+  SetTotalNodesAndCores,
+  GetNodeCount,
+  LimitNodes,
+  ReadTrueLinkFailStatus,
+  Fam10GetNextLink,
+  GetPackageLink,
+  MakeLinkBase,
+  Fam10GetModuleInfo,
+  Fam10PostMailbox,
+  Fam10RetrieveMailbox,
+  Fam10GetSocket,
+  (PF_GET_ENABLED_COMPUTE_UNITS)CommonReturnZero8,
+  (PF_GET_DUALCORE_COMPUTE_UNITS)CommonReturnZero8,
+  0x00000001,
+  0x00000200,
+  18,
+  TRUE,
+  TRUE,
+  (AMD_FAMILY_10_HY),
+  NULL,
+  0,
+  NULL,
+  MakeKey,
+  NULL
+};
+
+/**
+ * Initial construction data for Family 10h North Bridge, for RevE compatible non-coherent only builds.
+ */
+CONST NORTHBRIDGE ROMDATA HtFam10RevENbNonCoherentOnly =
+{
+  8,
+  (PF_WRITE_ROUTING_TABLE)CommonVoid,
+  (PF_WRITE_NODEID)CommonVoid,
+  (PF_READ_DEFAULT_LINK)CommonReturnZero8,
+  (PF_ENABLE_ROUTING_TABLES)CommonVoid,
+  (PF_DISABLE_ROUTING_TABLES)CommonVoid,
+  (PF_VERIFY_LINK_IS_COHERENT)CommonReturnFalse,
+  (PF_READ_TOKEN)CommonReturnZero8,
+  (PF_WRITE_TOKEN)CommonVoid,
+  (PF_WRITE_FULL_ROUTING_TABLE)CommonVoid,
+  (PF_IS_ILLEGAL_TYPE_MIX)CommonReturnFalse,
+  (PF_IS_EXCEEDED_CAPABLE)CommonReturnFalse,
+  (PF_STOP_LINK)CommonVoid,
+  (PF_HANDLE_SPECIAL_LINK_CASE)CommonReturnFalse,
+  (PF_HANDLE_SPECIAL_NODE_CASE)CommonReturnFalse,
+  ReadSouthbridgeLink,
+  VerifyLinkIsNonCoherent,
+  Fam10SetConfigAddrMap,
+  Fam10NorthBridgeFreqMask,
+  GatherLinkFeatures,
+  SetLinkRegang,
+  SetLinkFrequency,
+  SetLinkUnitIdClumping,
+  (PF_WRITE_TRAFFIC_DISTRIBUTION)CommonVoid,
+  (PF_WRITE_LINK_PAIR_DISTRIBUTION)CommonVoid,
+  (PF_WRITE_VICTIM_DISTRIBUTION)CommonVoid,
+  Fam10BufferOptimizations,
+  Fam10RevDGetNumCoresOnNode,
+  SetTotalNodesAndCores,
+  GetNodeCount,
+  LimitNodes,
+  ReadTrueLinkFailStatus,
+  Fam10GetNextLink,
+  GetPackageLink,
+  MakeLinkBase,
+  Fam10GetModuleInfo,
+  Fam10PostMailbox,
+  Fam10RetrieveMailbox,
+  Fam10GetSocket,
+  (PF_GET_ENABLED_COMPUTE_UNITS)CommonReturnZero8,
+  (PF_GET_DUALCORE_COMPUTE_UNITS)CommonReturnZero8,
+  0x00000001,
+  0x00000200,
+  18,
+  TRUE,
+  TRUE,
+  (AMD_FAMILY_10_PH),
+  NULL,
+  0,
+  NULL,
+  MakeKey,
+  NULL
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbNonCoherentFam10.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbNonCoherentFam10.c
new file mode 100644
index 0000000000..4f852ec70c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbNonCoherentFam10.c
@@ -0,0 +1,121 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge non-coherent support for Family 10h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbNonCoherentFam10.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FAM10_HTNBNONCOHERENTFAM10_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable config access to a non-coherent chain for the given bus range.
+ *
+ * @HtNbMethod{::F_SET_CONFIG_ADDR_MAP}
+ *
+ * @param[in]     ConfigMapIndex the map entry to set
+ * @param[in]     SecBus         The secondary bus number to use
+ * @param[in]     SubBus         The subordinate bus number to use
+ * @param[in]     TargetNode     The Node  that shall be the recipient of the traffic
+ * @param[in]     TargetLink     The Link that shall be the recipient of the traffic
+ * @param[in]     State          our global state
+ * @param[in]     Nb             this northbridge
+ */
+VOID
+Fam10SetConfigAddrMap (
+  IN       UINT8       ConfigMapIndex,
+  IN       UINT8       SecBus,
+  IN       UINT8       SubBus,
+  IN       UINT8       TargetNode,
+  IN       UINT8       TargetLink,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT8 CurNode;
+  PCI_ADDR Reg;
+  UINT32 Temp;
+
+  Reg = Nb->MakeLinkBase (TargetNode, TargetLink, Nb);
+
+  ASSERT (SecBus <= SubBus);
+  ASSERT (TargetNode <= State->NodesDiscovered);
+  ASSERT (TargetLink < Nb->MaxLinks);
+  Temp = SecBus;
+  Reg.Address.Register += HTHOST_ISOC_REG;
+  LibAmdPciWriteBits (Reg, 15, 8, &Temp, Nb->ConfigHandle);
+
+  Temp = ((UINT32)SubBus << 24) + ((UINT32)SecBus << 16) + ((UINT32)TargetLink << 8) +
+    ((UINT32)TargetNode << 4) + (UINT32)3;
+  for (CurNode = 0; CurNode < (State->NodesDiscovered + 1); CurNode++) {
+    Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (CurNode),
+                                   MakePciBusFromNode (CurNode),
+                                   MakePciDeviceFromNode (CurNode),
+                                   CPU_ADDR_FUNC_01,
+                                   REG_ADDR_CONFIG_MAP0_1XE0 + (4 * ConfigMapIndex));
+    LibAmdPciWrite (AccessWidth32, Reg, &Temp, Nb->ConfigHandle);
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbNonCoherentFam10.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbNonCoherentFam10.h
new file mode 100644
index 0000000000..af621dfedc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbNonCoherentFam10.h
@@ -0,0 +1,58 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge non-coherent support for Family 10h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/**
+ * Enable config access to a non-coherent chain for the given bus range.
+ *
+ */
+VOID
+Fam10SetConfigAddrMap (
+  IN       UINT8       ConfigMapIndex,
+  IN       UINT8       SecBus,
+  IN       UINT8       SubBus,
+  IN       UINT8       TargetNode,
+  IN       UINT8       TargetLink,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbOptimizationFam10.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbOptimizationFam10.c
new file mode 100644
index 0000000000..c7b138ebae
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbOptimizationFam10.c
@@ -0,0 +1,222 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Link optimization support specific to family 10h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNb.h"
+#include "htNbOptimizationFam10.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FAM10_HTNBOPTIMIZATIONFAM10_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Northbridge specific Frequency limit.
+ *
+ * @HtNbMethod{::F_NORTH_BRIDGE_FREQ_MASK}
+ *
+ * Return a mask that eliminates HT frequencies that cannot be used due to a slow
+ * northbridge frequency.
+ *
+ * @param[in]     Node             Result could (later) be for a specific Node
+ * @param[in]     Interface        Access to non-HT support functions.
+ * @param[in]     PlatformConfig   Platform profile/build option config structure.
+ * @param[in]     Nb               this northbridge
+ *
+ * @return Frequency mask
+ */
+UINT32
+Fam10NorthBridgeFreqMask (
+  IN       UINT8                  Node,
+  IN       HT_INTERFACE           *Interface,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       NORTHBRIDGE            *Nb
+  )
+{
+  UINT32 NbCoreFreq;
+  UINT32 Supported;
+
+  ASSERT (Node < MAX_NODES);
+  ASSERT (Interface != NULL);
+  // The interface to power management will return a system based result.
+  // So we only need to call it once, not on every link.  Save the answer,
+  // and check to see if we can use a saved answer on subsequent calls.
+  //
+  if (Nb->CoreFrequency == 0) {
+    NbCoreFreq = Interface->GetMinNbCoreFreq (PlatformConfig, Nb->ConfigHandle);
+    NbCoreFreq = (NbCoreFreq / 100);
+    ASSERT (NbCoreFreq != 0);
+    Nb->CoreFrequency = NbCoreFreq;
+  } else {
+    NbCoreFreq = Nb->CoreFrequency;
+  }
+
+  //
+  // NbCoreFreq is minimum northbridge speed in hundreds of MHz.
+  // HT can not go faster than the minimum speed of the northbridge.
+  //
+  if ((NbCoreFreq >= 6) && (NbCoreFreq <= 26)) {
+    //  Convert frequency to bit and all less significant bits,
+    // by setting next power of 2 and subtracting 1.
+    //
+    Supported = ((UINT32)1 << ((NbCoreFreq >> 1) + 2)) - 1;
+  } else if ((NbCoreFreq > 26) && (NbCoreFreq <= 32)) {
+    // Convert frequency to bit and all less significant bits,
+    // by setting next power of 2 and subtracting 1, noting that
+    // next power of two is two greater than non-extended frequencies
+    // (because of the register break).
+    //
+    Supported = ((UINT32)1 << ((NbCoreFreq >> 1) + 4)) - 1;
+  } else if (NbCoreFreq > 32) {
+    Supported = HT_FREQUENCY_LIMIT_MAX;
+  } else if (NbCoreFreq == 4) {
+    // unlikely cases, but include as a defensive measure, also avoid trick above
+    Supported = HT_FREQUENCY_LIMIT_400M;
+  } else if (NbCoreFreq == 2) {
+    Supported = HT_FREQUENCY_LIMIT_200M;
+  } else {
+    ASSERT (FALSE);
+    Supported = HT_FREQUENCY_LIMIT_200M;
+  }
+
+  return (Supported);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Northbridge specific Frequency limit.
+ *
+ * @HtNbMethod{::F_NORTH_BRIDGE_FREQ_MASK}
+ *
+ * Return a mask that eliminates HT frequencies that cannot be used due to a slow
+ * northbridge frequency.
+ *
+ * @param[in]     Node             Result could (later) be for a specific Node
+ * @param[in]     Interface        Access to non-HT support functions.
+ * @param[in]     PlatformConfig   Platform profile/build option config structure.
+ * @param[in]     Nb               this northbridge
+ *
+ * @return Frequency mask
+ */
+UINT32
+Fam10RevDNorthBridgeFreqMask (
+  IN       UINT8                  Node,
+  IN       HT_INTERFACE           *Interface,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       NORTHBRIDGE            *Nb
+  )
+{
+  UINT32 NbCoreFreq;
+  UINT32 Supported;
+
+  ASSERT (Node < MAX_NODES);
+  ASSERT (Interface != NULL);
+  // The interface to power management will return a system based result.
+  // So we only need to call it once, not on every link.  Save the answer,
+  // and check to see if we can use a saved answer on subsequent calls.
+  //
+  if (Nb->CoreFrequency == 0) {
+    NbCoreFreq = Interface->GetMinNbCoreFreq (PlatformConfig, Nb->ConfigHandle);
+    NbCoreFreq = (NbCoreFreq / 100);
+    ASSERT (NbCoreFreq != 0);
+    Nb->CoreFrequency = NbCoreFreq;
+  } else {
+    NbCoreFreq = Nb->CoreFrequency;
+  }
+
+  // For Rev D, the Ht frequency can go twice the Nb COF, as long as it's HT3.
+  // (side note: we are not speculatively upgrading HT1 at 6 .. 10 to HT3,
+  //  to avoid complicated recovery if the final speed is HT1.)
+  if (NbCoreFreq > 10) {
+    NbCoreFreq = NbCoreFreq * 2;
+  }
+  //
+  // NbCoreFreq is minimum northbridge speed in hundreds of MHz.
+  // HT can not go faster than the minimum speed of the northbridge.
+  //
+  if ((NbCoreFreq >= 6) && (NbCoreFreq <= 26)) {
+    //  Convert frequency to bit and all less significant bits,
+    // by setting next power of 2 and subtracting 1.
+    //
+    Supported = ((UINT32)1 << ((NbCoreFreq >> 1) + 2)) - 1;
+  } else if ((NbCoreFreq > 26) && (NbCoreFreq <= 32)) {
+    // Convert frequency to bit and all less significant bits,
+    // by setting next power of 2 and subtracting 1, noting that
+    // next power of two is two greater than non-extended frequencies
+    // (because of the register break).
+    //
+    Supported = ((UINT32)1 << ((NbCoreFreq >> 1) + 4)) - 1;
+  } else if (NbCoreFreq > 32) {
+    Supported = HT_FREQUENCY_LIMIT_MAX;
+  } else if (NbCoreFreq == 4) {
+    // unlikely cases, but include as a defensive measure, also avoid trick above
+    Supported = HT_FREQUENCY_LIMIT_400M;
+  } else if (NbCoreFreq == 2) {
+    Supported = HT_FREQUENCY_LIMIT_200M;
+  } else {
+    ASSERT (FALSE);
+    Supported = HT_FREQUENCY_LIMIT_200M;
+  }
+
+  return (Supported);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbOptimizationFam10.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbOptimizationFam10.h
new file mode 100644
index 0000000000..ca75b7fb6c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbOptimizationFam10.h
@@ -0,0 +1,74 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Link optimization support specific to family 10h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Northbridge specific Frequency limit.
+ *
+ */
+UINT32
+Fam10NorthBridgeFreqMask (
+  IN       UINT8                  Node,
+  IN       HT_INTERFACE           *Interface,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       NORTHBRIDGE            *Nb
+  );
+
+/**
+ * Northbridge specific Frequency limit.
+ *
+ */
+UINT32
+Fam10RevDNorthBridgeFreqMask (
+  IN       UINT8                  Node,
+  IN       HT_INTERFACE           *Interface,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       NORTHBRIDGE            *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbSystemFam10.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbSystemFam10.c
new file mode 100644
index 0000000000..ed921a2e43
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbSystemFam10.c
@@ -0,0 +1,402 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * System Tuning Family 10h specific routines
+ *
+ * Support for Traffic Distribution and buffer tunings which
+ * can not be done in a register table.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbSystemFam10.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FAM10_HTNBSYSTEMFAM10_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/**
+ * Register Fields for an individual link pair.
+ */
+typedef struct {
+  UINT32 Enable:1;            ///< Enable distribution on this pair.
+  UINT32 Asymmetric:1;        ///< Links are different widths.
+  UINT32 MasterSelect:3;      ///< The master link.
+  UINT32 AlternateSelect:3;   ///< The alternate link.
+} PAIR_SELECT_FIELDS;
+
+/**
+ * Register access union for ::PAIR_SELECT_FIELDS.
+ */
+typedef union {
+  UINT32 Value;               ///< access as a 32 bit value or register.
+  PAIR_SELECT_FIELDS Fields;  ///< access individual fields.
+} PAIR_SELECT;
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***               FAMILY/NORTHBRIDGE SPECIFIC FUNCTIONS                 ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set the traffic distribution register for the Links provided.
+ *
+ * @HtNbMethod{::F_WRITE_TRAFFIC_DISTRIBUTION}
+ *
+ * @param[in]     Links01   coherent Links from Node 0 to 1
+ * @param[in]     Links10   coherent Links from Node 1 to 0
+ * @param[in]     Nb        this northbridge
+ */
+VOID
+Fam10WriteTrafficDistribution (
+  IN       UINT32       Links01,
+  IN       UINT32       Links10,
+  IN       NORTHBRIDGE  *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR TrafficDistReg;
+
+  TrafficDistReg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (0),
+                                            MakePciBusFromNode (0),
+                                            MakePciDeviceFromNode (0),
+                                            CPU_HTNB_FUNC_00,
+                                            REG_HT_TRAFFIC_DIST_0X164);
+
+  // Node 0
+  // DstLnk
+  LibAmdPciWriteBits (TrafficDistReg, 23, 16, &Links01, Nb->ConfigHandle);
+  // DstNode = 1, cHTPrbDistEn = 1, cHTRspDistEn = 1, cHTReqDistEn = 1
+  Temp = 0x0107;
+  LibAmdPciWriteBits (TrafficDistReg, 15, 0, &Temp, Nb->ConfigHandle);
+
+  TrafficDistReg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (1),
+                                            MakePciBusFromNode (1),
+                                            MakePciDeviceFromNode (1),
+                                            CPU_HTNB_FUNC_00,
+                                            REG_HT_TRAFFIC_DIST_0X164);
+
+  // Node 1
+  // DstLnk
+  LibAmdPciWriteBits (TrafficDistReg, 23, 16, &Links10, Nb->ConfigHandle);
+  // DstNode = 0, cHTPrbDistEn = 1, cHTRspDistEn = 1, cHTReqDistEn = 1
+  Temp = 0x0007;
+  LibAmdPciWriteBits (TrafficDistReg, 15, 0, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write a link pair to the link pair distribution and fixups.
+ *
+ * @HtNbMethod{::F_WRITE_LINK_PAIR_DISTRIBUTION}
+ *
+ * Set the links as a pair using the link pair index provided.  Set asymmetric attribute as
+ * provided. If the Master Link is not currently used as the route, fixup the routes for all
+ * nodes which specify the alternate link.
+ *
+ * @param[in]    Node           Set the pair on this node
+ * @param[in]    ConnectedNode  The Node to which this link pair directly connects.
+ * @param[in]    Pair           Using this pair set in the register
+ * @param[in]    Asymmetric     True if different widths
+ * @param[in]    MasterLink     Set this as the master link and in the route
+ * @param[in]    AlternateLink  Set this as the alternate link
+ * @param[in]    Nb             this northbridge
+ *
+ */
+VOID
+Fam10WriteLinkPairDistribution (
+  IN       UINT8        Node,
+  IN       UINT8        ConnectedNode,
+  IN       UINT8        Pair,
+  IN       BOOLEAN      Asymmetric,
+  IN       UINT8        MasterLink,
+  IN       UINT8        AlternateLink,
+  IN       NORTHBRIDGE  *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 CurrentRoute;
+  UINT32 MasterRoute;
+  UINT32 AlternateRoute;
+  PAIR_SELECT Selection;
+  UINT32 RouteIndex;
+
+  ASSERT ((Node < MAX_NODES) && (ConnectedNode < MAX_NODES));
+  ASSERT (Pair < MAX_LINK_PAIRS);
+  ASSERT (MasterLink < Nb->MaxLinks);
+  ASSERT (AlternateLink < Nb->MaxLinks);
+
+  // Make the master link the route for all routes to or through NodeB, by replacing all occurrences of
+  // Alternate link with Master link.  If routing used the master link, no update is necessary.
+  MasterRoute = (((1 << Nb->BroadcastSelfBit) | Nb->SelfRouteResponseMask | Nb->SelfRouteRequestMask) << (MasterLink + 1));
+  AlternateRoute = (((1 << Nb->BroadcastSelfBit) | Nb->SelfRouteResponseMask | Nb->SelfRouteRequestMask) << (AlternateLink + 1));
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_ROUTE0_0X40);
+  for (RouteIndex = 0; RouteIndex < MAX_NODES; RouteIndex++) {
+    Reg.Address.Register = REG_ROUTE0_0X40 + (RouteIndex * 4);
+    LibAmdPciReadBits (Reg, 31, 0, &CurrentRoute, Nb->ConfigHandle);
+    if ((CurrentRoute & AlternateRoute) != 0) {
+      // Since Master and Alternate are redundant, the route must use one or the other but not both.
+      ASSERT ((CurrentRoute & MasterRoute) == 0);
+      // Set the master route for Request, Response or Broadcast only if the alternate was used for that case.
+      // Example, use of a link as a broadcast link is typically not the same route register as its use for Request, Response.
+      CurrentRoute = ((CurrentRoute & ~AlternateRoute) |
+                      ((((CurrentRoute & AlternateRoute) >> (AlternateLink + 1)) << (MasterLink + 1)) & MasterRoute));
+      LibAmdPciWriteBits (Reg, 31, 0, &CurrentRoute, Nb->ConfigHandle);
+    }
+  }
+
+  // Set the Link Pair and Enable it
+  Selection.Fields.Enable = 1;
+  Selection.Fields.Asymmetric = Asymmetric;
+  Selection.Fields.MasterSelect = MasterLink;
+  Selection.Fields.AlternateSelect = AlternateLink;
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_HT_LINK_PAIR_DIST_0X1E0);
+  LibAmdPciWriteBits (
+    Reg,
+    ((PAIR_SELECT_OFFSET * (Pair + 1)) - 1),
+    (PAIR_SELECT_OFFSET * Pair),
+    &Selection.Value,
+    Nb->ConfigHandle
+    );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Family 10h specific tunings.
+ *
+ * @HtNbMethod{::F_BUFFER_OPTIMIZATIONS}
+ *
+ * Buffer tunings are inherently northbridge specific. Check for specific configs
+ * which require adjustments and apply any standard workarounds to this Node.
+ *
+ * @param[in]     Node   the Node to tune
+ * @param[in]     State  global state
+ * @param[in]     Nb     this northbridge
+ */
+VOID
+Fam10BufferOptimizations (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR currentPtr;
+  PCI_ADDR GangedReg;
+  UINT8 i;
+
+  ASSERT (Node < MAX_NODES);
+
+  //
+  // Link to XCS Token Count Tuning
+  //
+  // For each active Link that we reganged (so this unfortunately can't go into the PCI reg
+  // table), we have to switch the Link to XCS Token Counts to the ganged state.
+  // We do this here for the non - uma case, which is to write the values that would have
+  // been power on defaults if the Link was ganged at cold reset.
+  //
+  for (i = 0; i < (State->TotalLinks * 2); i++) {
+    if (((*State->PortList)[i].NodeID == Node) && ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU)) {
+      // If the Link is greater than 4, this is a subLink 1, so it is not reganged.
+      if ((*State->PortList)[i].Link < 4) {
+        currentPtr.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                              MakePciBusFromNode (Node),
+                                              MakePciDeviceFromNode (Node),
+                                              CPU_NB_FUNC_03,
+                                              REG_NB_LINK_XCS_TOKEN0_3X148 + (4 * (*State->PortList)[i].Link)
+          );
+        if ((*State->PortList)[i].SelRegang) {
+          // Handle all the regang Token count adjustments
+
+          // SubLink 0: [Probe0tok] = 2 [Rsp0tok] = 2 [PReq0tok] = 2 [Req0tok] = 2
+          Temp = 0xAA;
+          LibAmdPciWriteBits (currentPtr, 7, 0, &Temp, Nb->ConfigHandle);
+          // SubLink 1: [Probe1tok] = 0 [Rsp1tok] = 0 [PReq1tok] = 0 [Req1tok] = 0
+          Temp = 0;
+          LibAmdPciWriteBits (currentPtr, 23, 16, &Temp, Nb->ConfigHandle);
+          // [FreeTok] = 3
+          Temp = 3;
+          LibAmdPciWriteBits (currentPtr, 15, 14, &Temp, Nb->ConfigHandle);
+
+        } else {
+          // Read the regang bit in hardware
+          GangedReg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode ((*State->PortList)[i].NodeID),
+                                               MakePciBusFromNode ((*State->PortList)[i].NodeID),
+                                               MakePciDeviceFromNode ((*State->PortList)[i].NodeID),
+                                               CPU_HTNB_FUNC_00,
+                                               REG_HT_LINK_EXT_CONTROL0_0X170 + (4 * (*State->PortList)[i].Link));
+          LibAmdPciReadBits (GangedReg, 0, 0, &Temp, Nb->ConfigHandle);
+          if (Temp == 1) {
+            // handle a minor adjustment for strapped ganged Links.  If SelRegang is false we
+            // didn't do the regang, so if the bit is on then it's hardware strapped.
+            //
+
+            // [FreeTok] = 3
+            Temp = 3;
+            LibAmdPciWriteBits (currentPtr, 15, 14, &Temp, Nb->ConfigHandle);
+          }
+        }
+      }
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Family 10h specific tunings.
+ *
+ * @HtNbMethod{::F_BUFFER_OPTIMIZATIONS}
+ *
+ * Buffer tunings are inherently northbridge specific. Check for specific configs
+ * which require adjustments and apply any standard workarounds to this Node.
+ *
+ * @param[in]     Node   the Node to tune
+ * @param[in]     State  global state
+ * @param[in]     Nb     this northbridge
+ */
+VOID
+Fam10RevDBufferOptimizations (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR Reg;
+  UINT8 i;
+  FINAL_LINK_STATE FinalLinkState;
+  UINT32 WidthIn;
+  UINT32 WidthOut;
+
+  ASSERT (Node < MAX_NODES);
+
+  //
+  // Internal link fixup.
+  // When powering off internal link 2, a performance optimization may be possible where its buffers
+  // can be made available to the external paired sublink.  If the conditions are met, do the fix up here.
+  //
+  for (i = 0; i < (State->TotalLinks * 2); i++) {
+    if (((*State->PortList)[i].NodeID == Node) && ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU)) {
+      // Is this a sublink 0 paired with internal link 2?
+      if (((*State->PortList)[i].Link < 4) &&
+          (Nb->GetPackageLink (Node, ((*State->PortList)[i].Link + 4), Nb) == HT_LIST_MATCH_INTERNAL_LINK_2)) {
+        FinalLinkState = State->HtInterface->GetIgnoreLink (Node, ((*State->PortList)[i].Link + 4), Nb->DefaultIgnoreLinkList, State);
+        // Are we ignoring the internal link 2 with Power Off?
+        if (FinalLinkState == POWERED_OFF) {
+          // Read the regang bit in hardware.
+          Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                         MakePciBusFromNode (Node),
+                                         MakePciDeviceFromNode (Node),
+                                         CPU_HTNB_FUNC_00,
+                                         REG_HT_LINK_EXT_CONTROL0_0X170 + (4 * (*State->PortList)[i].Link));
+          LibAmdPciReadBits (Reg, 0, 0, &Temp, Nb->ConfigHandle);
+          // If it's already ganged, skip to the width fix up.
+          if (Temp == 0) {
+            // Clear EndOfChain / XmitOff on internal sublink
+            Reg = Nb->MakeLinkBase (Node, ((*State->PortList)[i].Link + 4), Nb);
+            Reg.Address.Register += HTHOST_LINK_CONTROL_REG;
+            Temp = 0;
+            State->HtFeatures->SetHtControlRegisterBits (Reg, 7, 6, &Temp, State);
+
+            // Gang the link
+            Nb->SetLinkRegang (Node, (*State->PortList)[i].Link, Nb);
+          }
+
+          // Set InLnSt = PHY_OFF in register table.
+          // Set sublink 0 widths to 8 bits
+          if ((*State->PortList)[i].SelWidthOut > 8) {
+            (*State->PortList)[i].SelWidthOut = 8;
+          }
+          if ((*State->PortList)[i].SelWidthIn > 8) {
+            (*State->PortList)[i].SelWidthIn = 8;
+          }
+          WidthOut = State->HtFeatures->ConvertWidthToBits ((*State->PortList)[i].SelWidthOut);
+          WidthIn = State->HtFeatures->ConvertWidthToBits ((*State->PortList)[i].SelWidthIn);
+          Temp = (WidthIn & 7) | ((WidthOut & 7) << 4);
+          Reg = Nb->MakeLinkBase (Node, (*State->PortList)[i].Link, Nb);
+          Reg.Address.Register += HTHOST_LINK_CONTROL_REG;
+          State->HtFeatures->SetHtControlRegisterBits (Reg, 31, 24, &Temp, State);
+        }
+      }
+    }
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbSystemFam10.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbSystemFam10.h
new file mode 100644
index 0000000000..9a9647d63c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbSystemFam10.h
@@ -0,0 +1,91 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * System Tuning Family 10h specific routines
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/**
+ * Set the traffic distribution register for the Links provided.
+ *
+ */
+VOID
+Fam10WriteTrafficDistribution (
+  IN       UINT32       Links01,
+  IN       UINT32       Links10,
+  IN       NORTHBRIDGE  *Nb
+  );
+
+/**
+ * Write a link pair to the link pair distribution and fixups.
+ *
+ */
+VOID
+Fam10WriteLinkPairDistribution (
+  IN       UINT8        Node,
+  IN       UINT8        ConnectedNode,
+  IN       UINT8        Pair,
+  IN       BOOLEAN      Asymmetric,
+  IN       UINT8        MasterLink,
+  IN       UINT8        AlternateLink,
+  IN       NORTHBRIDGE  *Nb
+  );
+
+/**
+ * Family 10h specific tunings.
+ *
+ */
+VOID
+Fam10BufferOptimizations (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Family 10h Rev D specific tunings.
+ *
+ */
+VOID
+Fam10RevDBufferOptimizations (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbUtilitiesFam10.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbUtilitiesFam10.c
new file mode 100644
index 0000000000..8241a6370c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbUtilitiesFam10.c
@@ -0,0 +1,445 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge utility routines.
+ *
+ * These routines are needed for support of more than one feature area.
+ * Collect them in this file so build options don't remove them.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbUtilitiesFam10.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FAM10_HTNBUTILITIESFAM10_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return the number of cores (1 based count) on Node.
+ *
+ * @HtNbMethod{::F_GET_NUM_CORES_ON_NODE}
+ *
+ * @param[in]     Node   the Node that will be examined
+ * @param[in]     Nb     this northbridge
+ *
+ * @return        the number of cores
+ */
+UINT8
+Fam10GetNumCoresOnNode (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Result;
+  UINT32 Leveling;
+  UINT32 Cores;
+  UINT8 i;
+  PCI_ADDR Reg;
+
+  ASSERT ((Node < MAX_NODES));
+  // Read CmpCap
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_CAPABILITY_3XE8);
+
+  LibAmdPciReadBits (Reg, 13, 12, &Cores, Nb->ConfigHandle);
+
+  // Support Downcoring
+  Result = Cores;
+  Cores++;
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_DOWNCORE_3X190);
+  LibAmdPciReadBits (Reg, 3, 0, &Leveling, Nb->ConfigHandle);
+  for (i = 0; i < Cores; i++) {
+    if ((Leveling & ((UINT32) 1 << i)) != 0) {
+      Result--;
+    }
+  }
+  return (UINT8) (Result + 1);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return the number of cores (1 based count) on Node.
+ *
+ * @HtNbMethod{::F_GET_NUM_CORES_ON_NODE}.
+ *
+ * @param[in]     Node   the Node that will be examined
+ * @param[in]     Nb     this northbridge
+ *
+ * @return        the number of cores
+ */
+UINT8
+Fam10RevDGetNumCoresOnNode (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Result;
+  UINT32 Leveling;
+  UINT32 Cores;
+  UINT32 Cores2;
+  UINT8 i;
+  PCI_ADDR Reg;
+
+  ASSERT ((Node < MAX_NODES));
+  // Read CmpCap
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_CAPABILITY_3XE8);
+
+  LibAmdPciReadBits (Reg, 13, 12, &Cores, Nb->ConfigHandle);
+  LibAmdPciReadBits (Reg, 15, 15, &Cores2, Nb->ConfigHandle);
+  Cores = Cores + (Cores2 << 2);
+
+  // Support Downcoring
+  Result = Cores;
+  Cores++;
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_DOWNCORE_3X190);
+  LibAmdPciReadBits (Reg, 5, 0, &Leveling, Nb->ConfigHandle);
+  for (i = 0; i < Cores; i++) {
+    if ((Leveling & ((UINT32) 1 << i)) != 0) {
+      Result--;
+    }
+  }
+  return (UINT8) (Result + 1);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the next link for iterating over the links on a node in the correct order.
+ *
+ * @HtNbMethod{::F_GET_NEXT_LINK}
+ *
+ * Family 10h specific implementation use the Internal Link field in
+ * the northbridge to prioritize internal links in the order.
+ *
+ * @param[in]     Node The node on which to iterate links.
+ * @param[in,out] Link IN: the current iteration context, OUT: the next link.
+ * @param[in]     Nb   This Northbridge, access to config pointer.
+ *
+ * @retval LinkIteratorExternal    The current Link is an external link.
+ * @retval LinkIteratorInternal    The current Link is an internal link.
+ * @retval LinkIteratorEnd         There is no next link (Link is back to BEGIN).
+ *
+ */
+LINK_ITERATOR_STATUS
+Fam10GetNextLink (
+  IN       UINT8       Node,
+  IN OUT   UINT8       *Link,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32   InternalLinks;
+  UINT32   ExternalLinks;
+  UINT32   HigherLinks;
+  BOOLEAN  IsInternalLink;
+  LINK_ITERATOR_STATUS Status;
+
+  ASSERT ((Node < MAX_NODES));
+  ASSERT ((*Link < Nb->MaxLinks) || (*Link == LINK_ITERATOR_BEGIN));
+  InternalLinks = 0;
+  ExternalLinks = 0;
+
+  // Read IntLnkRoute from the Link Initialization Status register.
+  // (Note that this register field is not reserved prior to rev D, but should be zero.)
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_HT_LINK_INITIALIZATION_0X1A0);
+
+  LibAmdPciReadBits (Reg, 23, 16, &InternalLinks, Nb->ConfigHandle);
+  // The external links are all possible links which are not Internal
+  ExternalLinks = (((1 << Nb->MaxLinks) - 1) ^ InternalLinks);
+  // Can't have no possible links!
+  ASSERT ((ExternalLinks != 0) || (InternalLinks != 0));
+
+
+  if (*Link == LINK_ITERATOR_BEGIN) {
+    // If the request is for the first link (BEGIN), get it
+    if (InternalLinks != 0) {
+      *Link = LibAmdBitScanForward (InternalLinks);
+      Status = LinkIteratorInternal;
+    } else {
+      *Link = LibAmdBitScanForward (ExternalLinks);
+      Status = LinkIteratorExternal;
+    }
+  } else {
+    // If the iterator is not at the beginning, search for the next Link starting from the
+    // current link.
+    HigherLinks = InternalLinks & ~((1 << (*Link + 1)) - 1);
+    IsInternalLink = (BOOLEAN) ((InternalLinks & (1 << *Link)) != 0);
+    if (IsInternalLink && (HigherLinks != 0)) {
+      // We are still on internal links and there are more to do.
+      *Link = LibAmdBitScanForward (HigherLinks);
+      Status = LinkIteratorInternal;
+    } else {
+      if (IsInternalLink) {
+        // We are transitioning now from internal to external, so get the first external link
+        HigherLinks = ExternalLinks;
+      } else {
+        // We are already iterating over external links, so get the next one
+        HigherLinks = ExternalLinks & ~((1 << (*Link + 1)) - 1);
+      }
+      if (HigherLinks != 0) {
+        *Link = LibAmdBitScanForward (HigherLinks);
+        Status = LinkIteratorExternal;
+      } else {
+        // The end of all links
+        *Link = LINK_ITERATOR_BEGIN;
+        Status = LinkIteratorEnd;
+      }
+    }
+  }
+  return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get Info about Module Type of this northbridge
+ *
+ * @HtNbMethod{::F_GET_MODULE_INFO}
+ *
+ * Provide the Processor module type, single or multi, and the node's module id.
+ *
+ * @param[in]     Node                the Node
+ * @param[out]    ModuleType          0 for Single, 1 for Multi
+ * @param[out]    Module              The module number of this node (0 if Single)
+ * @param[in]     Nb                  this northbridge
+ *
+ */
+VOID
+Fam10GetModuleInfo (
+  IN       UINT8       Node,
+     OUT   UINT8       *ModuleType,
+     OUT   UINT8       *Module,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 MultNodeCpu;
+  UINT32 IntNodeNum;
+
+  ASSERT (Node < MAX_NODES);
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_CAPABILITY_3XE8);
+  LibAmdPciReadBits (Reg, 29, 29, &MultNodeCpu, Nb->ConfigHandle);
+  LibAmdPciReadBits (Reg, 31, 30, &IntNodeNum, Nb->ConfigHandle);
+
+  *ModuleType = (UINT8) MultNodeCpu;
+  *Module = (UINT8) IntNodeNum;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Implement the hardware method of doing Socket Naming, by accessing this northbridge's Socket Id register.
+ *
+ * @HtNbMethod{::F_GET_SOCKET}
+ *
+ * The hardware socket naming method is not available for Family 10h prior to rev D.
+ *
+ * @param[in]   Node    The node for which we want the socket id.
+ * @param[in]   TempNode The temporary node id route where the node can be accessed.
+ * @param[in]   Nb      Our Northbridge.
+ *
+ * @return      The Socket Id
+ */
+UINT8
+Fam10GetSocket (
+  IN       UINT8       Node,
+  IN       UINT8       TempNode,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  ASSERT ((Node < MAX_NODES));
+  ASSERT (TempNode < MAX_NODES);
+  ASSERT (Nb != NULL);
+  return (Node);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Implement the hardware method of doing Socket Naming, by accessing this northbridge's Socket Id register.
+ *
+ * @HtNbMethod{::F_GET_SOCKET}
+ *
+ * The Socket Id is strapped to the Sbi Control Register, F3X1E4[6:4]SbiAddr.
+ *
+ * @param[in]   Node    The node for which we want the socket id.
+ * @param[in]   TempNode The temporary node id route where the node can be accessed.
+ * @param[in]   Nb      Our Northbridge.
+ *
+ * @return      The Socket Id
+ */
+UINT8
+Fam10RevDGetSocket (
+  IN       UINT8       Node,
+  IN       UINT8       TempNode,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Socket;
+  PCI_ADDR Reg;
+
+  ASSERT ((TempNode < MAX_NODES));
+  ASSERT ((Node < MAX_NODES));
+  // Read SbiAddr
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (TempNode),
+                                 MakePciBusFromNode (TempNode),
+                                 MakePciDeviceFromNode (TempNode),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_SBI_CONTROL_3X1E4);
+  LibAmdPciReadBits (Reg, 6, 4, &Socket, Nb->ConfigHandle);
+  return ((UINT8) Socket);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Post info to AP cores via a mailbox.
+ *
+ * @HtNbMethod{::F_POST_MAILBOX}
+ *
+ * Use the link MCA counter register as a PCI -> MSR mailbox, for info such as node id,
+ * and module info.
+ *
+ * @param[in]     Node          the Node
+ * @param[in]     ApMailboxes   The info to post
+ * @param[in]     Nb            this northbridge
+ *
+ */
+VOID
+Fam10PostMailbox (
+  IN       UINT8 Node,
+  IN       AP_MAILBOXES ApMailboxes,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+
+  ASSERT (Node < MAX_NODES);
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_MCA_LINK_THRESHOLD_3X168);
+  LibAmdPciWriteBits (Reg, 11, 0, &ApMailboxes.ApMailInfo.Info, Nb->ConfigHandle);
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_MCA_L3_THRESHOLD_3X170);
+  LibAmdPciWriteBits (Reg, 11, 0, &ApMailboxes.ApMailExtInfo.Info, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Retrieve info from a node's mailbox.
+ *
+ * @HtNbMethod{::F_RETRIEVE_MAILBOX}
+ *
+ * Use the link MCA counter register as a PCI -> MSR mailbox, for info such as node id,
+ * and module info.
+ *
+ * @param[in]     Node          the Node
+ * @param[in]     Nb            this northbridge
+ *
+ * @return        The ap mailbox info
+ *
+ */
+AP_MAIL_INFO
+Fam10RetrieveMailbox (
+  IN       UINT8 Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  AP_MAIL_INFO ApMailInfo;
+
+  ASSERT (Node < MAX_NODES);
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_MCA_LINK_THRESHOLD_3X168);
+  LibAmdPciReadBits (Reg, 11, 0, &ApMailInfo.Info, Nb->ConfigHandle);
+  return ApMailInfo;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbUtilitiesFam10.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbUtilitiesFam10.h
new file mode 100644
index 0000000000..aaa1ca4621
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam10/htNbUtilitiesFam10.h
@@ -0,0 +1,129 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge utility routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/**
+ * Return the number of cores (1 based count) on Node.
+ *
+ */
+UINT8
+Fam10GetNumCoresOnNode (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Return the number of cores (1 based count) on Node.
+ *
+ */
+UINT8
+Fam10RevDGetNumCoresOnNode (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Get the next link for iterating over the links on a node in the correct order.
+ *
+ */
+LINK_ITERATOR_STATUS
+Fam10GetNextLink (
+  IN       UINT8       Node,
+  IN OUT   UINT8       *Link,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Get Info about Module Type of this northbridge
+ *
+ */
+VOID
+Fam10GetModuleInfo (
+  IN       UINT8       Node,
+     OUT   UINT8       *ModuleType,
+     OUT   UINT8       *Module,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Implement the hardware method of doing Socket Naming, by accessing this northbridge's Socket Id register.
+ *
+ */
+UINT8
+Fam10GetSocket (
+  IN       UINT8       Node,
+  IN       UINT8       TempNode,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Implement the hardware method of doing Socket Naming, by accessing this northbridge's Socket Id register.
+ *
+ */
+UINT8
+Fam10RevDGetSocket (
+  IN       UINT8       Node,
+  IN       UINT8       TempNode,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Post info to AP cores via a mailbox.
+ *
+ */
+VOID
+Fam10PostMailbox (
+  IN       UINT8 Node,
+  IN       AP_MAILBOXES ApMailboxes,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Retrieve info from a node's mailbox.
+ *
+ */
+AP_MAIL_INFO
+Fam10RetrieveMailbox (
+  IN       UINT8 Node,
+  IN       NORTHBRIDGE *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbCoherentFam15.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbCoherentFam15.c
new file mode 100644
index 0000000000..11083e8d18
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbCoherentFam15.c
@@ -0,0 +1,162 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Coherent Family 15h Routines.
+ *
+ * Coherent feature Northbridge implementation specific to Family 15h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbCoherentFam15.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_HT_FAM15_HTNBCOHERENTFAM15_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return whether the current configuration exceeds the capability.
+ *
+ * @HtNbMethod{::F_IS_EXCEEDED_CAPABLE}.
+ *
+ * Get Node capability and update the minimum supported system capability.
+ *
+ * @param[in]     Node     the Node
+ * @param[in]     State    sysMpCap (updated) and NodesDiscovered
+ * @param[in]     Nb       this northbridge
+ *
+ * @retval        TRUE     system is not capable of current config.
+ * @retval        FALSE    system is capable of current config.
+ */
+BOOLEAN
+Fam15IsExceededCapable (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Temp;
+  UINT8 MaxNodes;
+  PCI_ADDR Reg;
+
+  ASSERT (Node < MAX_NODES);
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_CAPABILITY_3XE8);
+
+  LibAmdPciReadBits (Reg, 18, 16, &Temp, Nb->ConfigHandle);
+
+  if (Temp != 0) {
+    MaxNodes = (UINT8) (1 << (~Temp & 0x3));  // That is, 1, 2, 4, or 8
+  } else {
+    MaxNodes = 8;
+  }
+  if (State->SysMpCap > MaxNodes) {
+    State->SysMpCap = MaxNodes;
+  }
+  // Note since sysMpCap is one based and NodesDiscovered is zero based, equal returns true
+  //
+  return ((BOOLEAN) (State->SysMpCap <= State->NodesDiscovered));
+}
+
+/**
+ * Stop a link, so that it is isolated from a connected device.
+ *
+ * @HtNbMethod{::F_STOP_LINK}.
+ *
+ * Use is for fatal incompatible configurations, or for user interface
+ * request to power off a link (IgnoreLink, SkipRegang).
+ * Set ConnDly to make the power effective at the warm reset.
+ * Set XMT and RCV off.
+ *
+ * @param[in] Node   the node to stop a link on.
+ * @param[in] Link   the link to stop.
+ * @param[in] State  access to special routine for writing link control register
+ * @param[in] Nb     this northbridge.
+ */
+VOID
+Fam15StopLink (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR Reg;
+
+  // Set ConnDly
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_LINK_GLOBAL_EXT_CONTROL_0x16C);
+  Temp = 1;
+  LibAmdPciWriteBits (Reg, 8, 8, &Temp, Nb->ConfigHandle);
+  // Set TransOff and EndOfChain
+  Reg = Nb->MakeLinkBase (Node, Link, Nb);
+  Reg.Address.Register += HTHOST_LINK_CONTROL_REG;
+  Temp = 3;
+  State->HtFeatures->SetHtControlRegisterBits (Reg, 7, 6, &Temp, State);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbCoherentFam15.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbCoherentFam15.h
new file mode 100644
index 0000000000..11db99bf8d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbCoherentFam15.h
@@ -0,0 +1,67 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Coherent Family 15h specific Routines.
+ *
+ * Coherent feature Northbridge implementation specific to Family 15h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/**
+ * Return whether the current configuration exceeds the capability.
+ *
+ */
+BOOLEAN
+Fam15IsExceededCapable (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Stop a link, so that it is isolated from a connected device.
+ */
+VOID
+Fam15StopLink (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbFam15.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbFam15.c
new file mode 100644
index 0000000000..112035594e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbFam15.c
@@ -0,0 +1,248 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initializers for Family 15h northbridge support.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44846 $   @e \$Date: 2011-01-06 22:21:05 -0700 (Thu, 06 Jan 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionsHt.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "CommonReturns.h"
+#include "htNbCoherent.h"
+#include "htNbCoherentFam15.h"
+#include "htNbNonCoherent.h"
+#include "htNbNonCoherentFam15.h"
+#include "htNbOptimization.h"
+#include "htNbOptimizationFam15.h"
+#include "htNbSystemFam15.h"
+#include "htNbUtilities.h"
+#include "htNbUtilitiesFam15.h"
+#include "cpuFamRegisters.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#include "Filecode.h"
+
+#define FILECODE PROC_HT_FAM15_HTNBFAM15_FILECODE
+
+extern OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***               FAMILY/NORTHBRIDGE SPECIFIC FUNCTIONS                 ***
+ ***************************************************************************/
+
+/**
+ * Map Northbridge links to package links for Family 15h, multi-module.
+ *
+ * Unfortunately, there is no way to do this except to type the BKDG text into this data structure.
+ * Note that there is one entry per package external sublink and each connected internal link.
+ */
+CONST PACKAGE_HTLINK_MAP_ITEM ROMDATA HtFam15PackageLinkMap[] =
+{
+  {3, 0, 0},        ///< Module zero, link 3: package link 0
+  {7, 0, 4},        ///< Module zero, link 7: package link 4
+  {0, 1, 1},        ///< Module one,  link 0: package link 1
+  {4, 1, 5},        ///< Module one,  link 4: package link 5
+  {1, 0, 2},        ///< Module zero, link 1: package link 2
+  {5, 0, 6},        ///< Module zero, link 5: package link 6
+  {0, 0, 3},        ///< Module zero, link 0: package link 3
+  {3, 1, 7},        ///< Module one,  link 3: package link 7
+  {2, 0, HT_LIST_MATCH_INTERNAL_LINK_0},        ///< Internal Link
+  {6, 0, HT_LIST_MATCH_INTERNAL_LINK_1},        ///< Internal Link
+  {4, 0, HT_LIST_MATCH_INTERNAL_LINK_2},        ///< Internal Link
+  {1, 1, HT_LIST_MATCH_INTERNAL_LINK_0},        ///< Internal Link
+  {5, 1, HT_LIST_MATCH_INTERNAL_LINK_1},        ///< Internal Link
+  {7, 1, HT_LIST_MATCH_INTERNAL_LINK_2},        ///< Internal Link
+  {HT_LIST_TERMINAL, HT_LIST_TERMINAL, HT_LIST_TERMINAL}, ///< End
+};
+
+/**
+ * A default Ignore Link list to power off the 3rd internal sublink.
+ */
+STATIC CONST IGNORE_LINK ROMDATA Fam15IgnoreLinkList[] = {
+  {HT_LIST_MATCH_ANY, HT_LIST_MATCH_INTERNAL_LINK_2, POWERED_OFF},
+  {HT_LIST_TERMINAL}
+};
+
+/**
+ * Initial construction data for Family 15h North Bridge, default, full features.
+ */
+CONST NORTHBRIDGE ROMDATA HtFam15NbDefault =
+{
+  8,
+  WriteRoutingTable,
+  WriteNodeID,
+  ReadDefaultLink,
+  EnableRoutingTables,
+  DisableRoutingTables,
+  VerifyLinkIsCoherent,
+  ReadToken,
+  WriteToken,
+  WriteFullRoutingTable,
+  IsIllegalTypeMix,
+  Fam15IsExceededCapable,
+  Fam15StopLink,
+  (PF_HANDLE_SPECIAL_LINK_CASE)CommonReturnFalse,
+  HandleSpecialNodeCase,
+  ReadSouthbridgeLink,
+  VerifyLinkIsNonCoherent,
+  Fam15SetConfigAddrMap,
+  Fam15NorthBridgeFreqMask,
+  GatherLinkFeatures,
+  SetLinkRegang,
+  SetLinkFrequency,
+  SetLinkUnitIdClumping,
+  Fam15WriteTrafficDistribution,
+  Fam15WriteLinkPairDistribution,
+  Fam15WriteVictimDistribution,
+  Fam15BufferOptimizations,
+  Fam15GetNumCoresOnNode,
+  SetTotalNodesAndCores,
+  GetNodeCount,
+  LimitNodes,
+  ReadTrueLinkFailStatus,
+  Fam15GetNextLink,
+  GetPackageLink,
+  MakeLinkBase,
+  Fam15GetModuleInfo,
+  Fam15PostMailbox,
+  Fam15RetrieveMailbox,
+  Fam15StrappedGetSocket,
+  Fam15GetEnabledComputeUnits,
+  Fam15GetDualcoreComputeUnits,
+  0x00000001,
+  0x00000200,
+  18,
+  TRUE,
+  TRUE,
+  AMD_FAMILY_15,
+  (PACKAGE_HTLINK_MAP) &HtFam15PackageLinkMap,
+  0,
+  (IGNORE_LINK *)&Fam15IgnoreLinkList,
+  MakeKey,
+  NULL
+};
+
+/**
+ * Initial construction data for Family 15h North Bridge, for non-coherent only builds.
+ */
+CONST NORTHBRIDGE ROMDATA HtFam15NbNonCoherentOnly =
+{
+  8,
+  (PF_WRITE_ROUTING_TABLE)CommonVoid,
+  (PF_WRITE_NODEID)CommonVoid,
+  (PF_READ_DEFAULT_LINK)CommonReturnZero8,
+  (PF_ENABLE_ROUTING_TABLES)CommonVoid,
+  (PF_DISABLE_ROUTING_TABLES)CommonVoid,
+  (PF_VERIFY_LINK_IS_COHERENT)CommonReturnFalse,
+  (PF_READ_TOKEN)CommonReturnZero8,
+  (PF_WRITE_TOKEN)CommonVoid,
+  (PF_WRITE_FULL_ROUTING_TABLE)CommonVoid,
+  (PF_IS_ILLEGAL_TYPE_MIX)CommonReturnFalse,
+  (PF_IS_EXCEEDED_CAPABLE)CommonReturnFalse,
+  (PF_STOP_LINK)CommonVoid,
+  (PF_HANDLE_SPECIAL_LINK_CASE)CommonReturnFalse,
+  (PF_HANDLE_SPECIAL_NODE_CASE)CommonReturnFalse,
+  ReadSouthbridgeLink,
+  VerifyLinkIsNonCoherent,
+  Fam15SetConfigAddrMap,
+  Fam15NorthBridgeFreqMask,
+  GatherLinkFeatures,
+  SetLinkRegang,
+  SetLinkFrequency,
+  SetLinkUnitIdClumping,
+  (PF_WRITE_TRAFFIC_DISTRIBUTION)CommonVoid,
+  (PF_WRITE_LINK_PAIR_DISTRIBUTION)CommonVoid,
+  (PF_WRITE_VICTIM_DISTRIBUTION)CommonVoid,
+  Fam15BufferOptimizations,
+  Fam15GetNumCoresOnNode,
+  SetTotalNodesAndCores,
+  GetNodeCount,
+  LimitNodes,
+  ReadTrueLinkFailStatus,
+  Fam15GetNextLink,
+  GetPackageLink,
+  MakeLinkBase,
+  Fam15GetModuleInfo,
+  Fam15PostMailbox,
+  Fam15RetrieveMailbox,
+  Fam15GetSocket,
+  Fam15GetEnabledComputeUnits,
+  Fam15GetDualcoreComputeUnits,
+  0x00000001,
+  0x00000200,
+  18,
+  TRUE,
+  TRUE,
+  ((AMD_FAMILY_15) & ~(AMD_FAMILY_TN | AMD_FAMILY_KM)),
+  (PACKAGE_HTLINK_MAP) &HtFam15PackageLinkMap,
+  0,
+  NULL,
+  MakeKey,
+  NULL
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbNonCoherentFam15.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbNonCoherentFam15.c
new file mode 100644
index 0000000000..a383492cda
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbNonCoherentFam15.c
@@ -0,0 +1,120 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge non-coherent support for Family 15h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbNonCoherentFam15.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_HT_FAM15_HTNBNONCOHERENTFAM15_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable config access to a non-coherent chain for the given bus range.
+ *
+ * @HtNbMethod{::F_SET_CONFIG_ADDR_MAP}
+ *
+ * @param[in]     ConfigMapIndex the map entry to set
+ * @param[in]     SecBus         The secondary bus number to use
+ * @param[in]     SubBus         The subordinate bus number to use
+ * @param[in]     TargetNode     The Node  that shall be the recipient of the traffic
+ * @param[in]     TargetLink     The Link that shall be the recipient of the traffic
+ * @param[in]     State          our global state
+ * @param[in]     Nb             this northbridge
+ */
+VOID
+Fam15SetConfigAddrMap (
+  IN       UINT8       ConfigMapIndex,
+  IN       UINT8       SecBus,
+  IN       UINT8       SubBus,
+  IN       UINT8       TargetNode,
+  IN       UINT8       TargetLink,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT8 CurNode;
+  PCI_ADDR Reg;
+  UINT32 Temp;
+
+  Reg = Nb->MakeLinkBase (TargetNode, TargetLink, Nb);
+
+  ASSERT (SecBus <= SubBus);
+  ASSERT (TargetNode <= State->NodesDiscovered);
+  ASSERT (TargetLink < Nb->MaxLinks);
+  Temp = SecBus;
+  Reg.Address.Register += HTHOST_ISOC_REG;
+  LibAmdPciWriteBits (Reg, 15, 8, &Temp, Nb->ConfigHandle);
+
+  Temp = ((UINT32)SubBus << 24) + ((UINT32)SecBus << 16) + ((UINT32)TargetLink << 8) +
+    ((UINT32)TargetNode << 4) + (UINT32)3;
+  for (CurNode = 0; CurNode < (State->NodesDiscovered + 1); CurNode++) {
+    Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (CurNode),
+                                   MakePciBusFromNode (CurNode),
+                                   MakePciDeviceFromNode (CurNode),
+                                   CPU_ADDR_FUNC_01,
+                                   REG_ADDR_CONFIG_MAP0_1XE0 + (4 * ConfigMapIndex));
+    LibAmdPciWrite (AccessWidth32, Reg, &Temp, Nb->ConfigHandle);
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbNonCoherentFam15.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbNonCoherentFam15.h
new file mode 100644
index 0000000000..a98f19be48
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbNonCoherentFam15.h
@@ -0,0 +1,58 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge non-coherent support for Family 15h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/**
+ * Enable config access to a non-coherent chain for the given bus range.
+ *
+ */
+VOID
+Fam15SetConfigAddrMap (
+  IN       UINT8       ConfigMapIndex,
+  IN       UINT8       SecBus,
+  IN       UINT8       SubBus,
+  IN       UINT8       TargetNode,
+  IN       UINT8       TargetLink,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbOptimizationFam15.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbOptimizationFam15.c
new file mode 100644
index 0000000000..75595c4959
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbOptimizationFam15.c
@@ -0,0 +1,148 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Link optimization support specific to family 15h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNb.h"
+#include "htNbOptimizationFam15.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_HT_FAM15_HTNBOPTIMIZATIONFAM15_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Northbridge specific Frequency limit.
+ *
+ * @HtNbMethod{::F_NORTH_BRIDGE_FREQ_MASK}
+ *
+ * Return a mask that eliminates HT frequencies that cannot be used due to a slow
+ * northbridge frequency.
+ *
+ * @param[in]     Node             Result could (later) be for a specific Node
+ * @param[in]     Interface        Access to non-HT support functions.
+ * @param[in]     PlatformConfig   Platform profile/build option config structure.
+ * @param[in]     Nb               this northbridge
+ *
+ * @return Frequency mask
+ */
+UINT32
+Fam15NorthBridgeFreqMask (
+  IN       UINT8        Node,
+  IN       HT_INTERFACE *Interface,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       NORTHBRIDGE  *Nb
+  )
+{
+  UINT32 NbCoreFreq;
+  UINT32 Supported;
+
+  ASSERT (Node < MAX_NODES);
+  ASSERT (Interface != NULL);
+  // The interface to power management will return a system based result.
+  // So we only need to call it once, not on every link.  Save the answer,
+  // and check to see if we can use a saved answer on subsequent calls.
+  //
+  if (Nb->CoreFrequency == 0) {
+    NbCoreFreq = Interface->GetMinNbCoreFreq (PlatformConfig, Nb->ConfigHandle);
+    NbCoreFreq = (NbCoreFreq / 100);
+    ASSERT (NbCoreFreq != 0);
+    Nb->CoreFrequency = NbCoreFreq;
+  } else {
+    NbCoreFreq = Nb->CoreFrequency;
+  }
+
+  // The Ht frequency can go twice the Nb COF, as long as it's HT3.
+  // (side note: we are not speculatively upgrading HT1 at 6 .. 10 to HT3,
+  //  to avoid complicated recovery if the final speed is HT1.)
+  if (NbCoreFreq > 10) {
+    NbCoreFreq = NbCoreFreq * 2;
+  }
+  //
+  // NbCoreFreq is minimum northbridge speed in hundreds of MHz.
+  // HT can not go faster than the minimum speed of the northbridge.
+  //
+  if ((NbCoreFreq >= 6) && (NbCoreFreq <= 26)) {
+    //  Convert frequency to bit and all less significant bits,
+    // by setting next power of 2 and subtracting 1.
+    //
+    Supported = ((UINT32)1 << ((NbCoreFreq >> 1) + 2)) - 1;
+  } else if ((NbCoreFreq > 26) && (NbCoreFreq <= 32)) {
+    // Convert frequency to bit and all less significant bits,
+    // by setting next power of 2 and subtracting 1, noting that
+    // next power of two is two greater than non-extended frequencies
+    // (because of the register break).
+    //
+    Supported = ((UINT32)1 << ((NbCoreFreq >> 1) + 4)) - 1;
+  } else if (NbCoreFreq > 32) {
+    Supported = HT_FREQUENCY_LIMIT_MAX;
+  } else if (NbCoreFreq == 4) {
+    // unlikely cases, but include as a defensive measure, also avoid trick above
+    Supported = HT_FREQUENCY_LIMIT_400M;
+  } else if (NbCoreFreq == 2) {
+    Supported = HT_FREQUENCY_LIMIT_200M;
+  } else {
+    ASSERT (FALSE);
+    Supported = HT_FREQUENCY_LIMIT_200M;
+  }
+
+  return (Supported);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbOptimizationFam15.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbOptimizationFam15.h
new file mode 100644
index 0000000000..1448bea5fe
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbOptimizationFam15.h
@@ -0,0 +1,63 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Link optimization support specific to family 15h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Northbridge specific Frequency limit.
+ *
+ */
+UINT32
+Fam15NorthBridgeFreqMask (
+  IN       UINT8                  Node,
+  IN       HT_INTERFACE           *Interface,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       NORTHBRIDGE            *Nb
+  );
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbSystemFam15.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbSystemFam15.c
new file mode 100644
index 0000000000..251fc9b60f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbSystemFam15.c
@@ -0,0 +1,373 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * System Tuning Family 15h specific routines
+ *
+ * Support for Traffic Distribution and buffer tunings which
+ * can not be done in a register table.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 50215 $   @e \$Date: 2011-04-05 20:50:13 -0600 (Tue, 05 Apr 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbSystemFam15.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_HT_FAM15_HTNBSYSTEMFAM15_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/**
+ * Register Fields for an individual link pair.
+ */
+typedef struct {
+  UINT32 Enable:1;            ///< Enable distribution on this pair.
+  UINT32 Asymmetric:1;        ///< Links are different widths.
+  UINT32 MasterSelect:3;      ///< The master link.
+  UINT32 AlternateSelect:3;   ///< The alternate link.
+} PAIR_SELECT_FIELDS;
+
+/**
+ * Register access union for ::PAIR_SELECT_FIELDS.
+ */
+typedef union {
+  UINT32 Value;               ///< access as a 32 bit value or register.
+  PAIR_SELECT_FIELDS Fields;  ///< access individual fields.
+} PAIR_SELECT;
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***               FAMILY/NORTHBRIDGE SPECIFIC FUNCTIONS                 ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set the traffic distribution register for the Links provided.
+ *
+ * @HtNbMethod{::F_WRITE_TRAFFIC_DISTRIBUTION}
+ *
+ * @param[in]     Links01   coherent Links from Node 0 to 1
+ * @param[in]     Links10   coherent Links from Node 1 to 0
+ * @param[in]     Nb        this northbridge
+ */
+VOID
+Fam15WriteTrafficDistribution (
+  IN       UINT32       Links01,
+  IN       UINT32       Links10,
+  IN       NORTHBRIDGE  *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR TrafficDistReg;
+
+  TrafficDistReg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (0),
+                                            MakePciBusFromNode (0),
+                                            MakePciDeviceFromNode (0),
+                                            CPU_HTNB_FUNC_00,
+                                            REG_HT_TRAFFIC_DIST_0X164);
+
+  // Node 0
+  // DstLnk
+  LibAmdPciWriteBits (TrafficDistReg, 23, 16, &Links01, Nb->ConfigHandle);
+  // DstNode = 1, cHTPrbDistEn = 1, cHTRspDistEn = 1, cHTReqDistEn = 1
+  Temp = 0x0107;
+  LibAmdPciWriteBits (TrafficDistReg, 15, 0, &Temp, Nb->ConfigHandle);
+
+  TrafficDistReg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (1),
+                                            MakePciBusFromNode (1),
+                                            MakePciDeviceFromNode (1),
+                                            CPU_HTNB_FUNC_00,
+                                            REG_HT_TRAFFIC_DIST_0X164);
+
+  // Node 1
+  // DstLnk
+  LibAmdPciWriteBits (TrafficDistReg, 23, 16, &Links10, Nb->ConfigHandle);
+  // DstNode = 0, cHTPrbDistEn = 1, cHTRspDistEn = 1, cHTReqDistEn = 1
+  Temp = 0x0007;
+  LibAmdPciWriteBits (TrafficDistReg, 15, 0, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set the victim distribution register for the Links provided.
+ *
+ * @HtNbMethod{::F_WRITE_VICTIM_DISTRIBUTION}
+ *
+ * @param[in]     NodeA     Source Node from Node A To Node B and DstNode from Node A To Node B
+ * @param[in]     NodeB     Source Node from Node B To Node A and DstNode from Node A To Node B
+ * @param[in]     LinksAB   Victimed Link from Node A To Node B
+ * @param[in]     LinksBA   Victimed Link from Node B To Node A
+ * @param[in]     Nb        this northbridge
+ */
+VOID
+Fam15WriteVictimDistribution (
+  IN       UINT8        NodeA,
+  IN       UINT8        NodeB,
+  IN       UINT32       LinksAB,
+  IN       UINT32       LinksBA,
+  IN       NORTHBRIDGE  *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR TrafficDistReg;
+
+  TrafficDistReg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (NodeA),
+                                            MakePciBusFromNode (NodeA),
+                                            MakePciDeviceFromNode (NodeA),
+                                            CPU_HTNB_FUNC_00,
+                                            REG_HT_TRAFFIC_DIST_0X164);
+
+  // Node A
+  // DstLnk
+  LibAmdPciWriteBits (TrafficDistReg, 23, 16, &LinksAB, Nb->ConfigHandle);
+  // DstNode = Node B, cHTPrbDistEn = 0, cHTRspDistEn = 1, cHTReqDistEn = 1, cHTVicDistMode = 1
+  Temp = NodeB;
+  Temp = (Temp << 8) | 0x0B;
+  LibAmdPciWriteBits (TrafficDistReg, 15, 0, &Temp, Nb->ConfigHandle);
+
+  TrafficDistReg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (NodeB),
+                                            MakePciBusFromNode (NodeB),
+                                            MakePciDeviceFromNode (NodeB),
+                                            CPU_HTNB_FUNC_00,
+                                            REG_HT_TRAFFIC_DIST_0X164);
+
+  // Node B
+  // DstLnk
+  LibAmdPciWriteBits (TrafficDistReg, 23, 16, &LinksBA, Nb->ConfigHandle);
+  // DstNode = Node A, cHTPrbDistEn = 0, cHTRspDistEn = 1, cHTReqDistEn = 1, cHTVicDistMode = 1
+  Temp = NodeA;
+  Temp = (Temp << 8) | 0x0B;
+  LibAmdPciWriteBits (TrafficDistReg, 15, 0, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write a link pair to the link pair distribution and fixups.
+ *
+ * @HtNbMethod{::F_WRITE_LINK_PAIR_DISTRIBUTION}
+ *
+ * Set the links as a pair using the link pair index provided.  Set asymmetric attribute as
+ * provided. If the Master Link is not currently used as the route, fixup the routes for all
+ * nodes which specify the alternate link.
+ *
+ * @param[in]    Node           Set the pair on this node
+ * @param[in]    ConnectedNode  The Node to which this link pair directly connects.
+ * @param[in]    Pair           Using this pair set in the register
+ * @param[in]    Asymmetric     True if different widths
+ * @param[in]    MasterLink     Set this as the master link and in the route
+ * @param[in]    AlternateLink  Set this as the alternate link
+ * @param[in]    Nb             this northbridge
+ *
+ */
+VOID
+Fam15WriteLinkPairDistribution (
+  IN       UINT8        Node,
+  IN       UINT8        ConnectedNode,
+  IN       UINT8        Pair,
+  IN       BOOLEAN      Asymmetric,
+  IN       UINT8        MasterLink,
+  IN       UINT8        AlternateLink,
+  IN       NORTHBRIDGE  *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 CurrentRoute;
+  UINT32 MasterRoute;
+  UINT32 AlternateRoute;
+  PAIR_SELECT Selection;
+  UINT32 RouteIndex;
+
+  ASSERT ((Node < MAX_NODES) && (ConnectedNode < MAX_NODES));
+  ASSERT (Pair < MAX_LINK_PAIRS);
+  ASSERT (MasterLink < Nb->MaxLinks);
+  ASSERT (AlternateLink < Nb->MaxLinks);
+
+  // Make the master link the route for all routes to or through NodeB, by replacing all occurrences of
+  // Alternate link with Master link.  If routing used the master link, no update is necessary.
+  MasterRoute = (((1 << Nb->BroadcastSelfBit) | Nb->SelfRouteResponseMask | Nb->SelfRouteRequestMask) << (MasterLink + 1));
+  AlternateRoute = (((1 << Nb->BroadcastSelfBit) | Nb->SelfRouteResponseMask | Nb->SelfRouteRequestMask) << (AlternateLink + 1));
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_ROUTE0_0X40);
+  for (RouteIndex = 0; RouteIndex < MAX_NODES; RouteIndex++) {
+    Reg.Address.Register = REG_ROUTE0_0X40 + (RouteIndex * 4);
+    LibAmdPciReadBits (Reg, 31, 0, &CurrentRoute, Nb->ConfigHandle);
+    if ((CurrentRoute & AlternateRoute) != 0) {
+      // Since Master and Alternate are redundant, the route must use one or the other but not both.
+      ASSERT ((CurrentRoute & MasterRoute) == 0);
+      // Set the master route for Request, Response or Broadcast only if the alternate was used for that case.
+      // Example, use of a link as a broadcast link is typically not the same route register as its use for Request, Response.
+      CurrentRoute = ((CurrentRoute & ~AlternateRoute) |
+                      ((((CurrentRoute & AlternateRoute) >> (AlternateLink + 1)) << (MasterLink + 1)) & MasterRoute));
+      LibAmdPciWriteBits (Reg, 31, 0, &CurrentRoute, Nb->ConfigHandle);
+    }
+  }
+
+  // Set the Link Pair and Enable it
+  Selection.Fields.Enable = 1;
+  Selection.Fields.Asymmetric = Asymmetric;
+  Selection.Fields.MasterSelect = MasterLink;
+  Selection.Fields.AlternateSelect = AlternateLink;
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_HT_LINK_PAIR_DIST_0X1E0);
+  LibAmdPciWriteBits (
+    Reg,
+    ((PAIR_SELECT_OFFSET * (Pair + 1)) - 1),
+    (PAIR_SELECT_OFFSET * Pair),
+    &Selection.Value,
+    Nb->ConfigHandle
+    );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Family 15h specific tunings.
+ *
+ * @HtNbMethod{::F_BUFFER_OPTIMIZATIONS}
+ *
+ * Buffer tunings are inherently northbridge specific. Check for specific configs
+ * which require adjustments and apply any standard workarounds to this Node.
+ *
+ * @param[in]     Node   the Node to tune
+ * @param[in]     State  global state
+ * @param[in]     Nb     this northbridge
+ */
+VOID
+Fam15BufferOptimizations (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR Reg;
+  UINT8 i;
+  FINAL_LINK_STATE FinalLinkState;
+  UINT32 WidthIn;
+  UINT32 WidthOut;
+
+  ASSERT (Node < MAX_NODES);
+
+  //
+  // Internal link fixup.
+  // When powering off internal link 2, a performance optimization may be possible where its buffers
+  // can be made available to the external paired sublink.  If the conditions are met, do the fix up here.
+  //
+  for (i = 0; i < (State->TotalLinks * 2); i++) {
+    if (((*State->PortList)[i].NodeID == Node) && ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU)) {
+      // Is this a sublink 0 paired with internal link 2?
+      if (((*State->PortList)[i].Link < 4) &&
+          (Nb->GetPackageLink (Node, ((*State->PortList)[i].Link + 4), Nb) == HT_LIST_MATCH_INTERNAL_LINK_2)) {
+        FinalLinkState = State->HtInterface->GetIgnoreLink (Node, ((*State->PortList)[i].Link + 4), Nb->DefaultIgnoreLinkList, State);
+        // Are we ignoring the internal link 2 with Power Off?
+        if (FinalLinkState == POWERED_OFF) {
+          // Read the regang bit in hardware.
+          Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                         MakePciBusFromNode (Node),
+                                         MakePciDeviceFromNode (Node),
+                                         CPU_HTNB_FUNC_00,
+                                         REG_HT_LINK_EXT_CONTROL0_0X170 + (4 * (*State->PortList)[i].Link));
+          LibAmdPciReadBits (Reg, 0, 0, &Temp, Nb->ConfigHandle);
+          // If it's already ganged, skip to the width fix up.
+          if (Temp == 0) {
+            // Clear EndOfChain / XmitOff of internal sublink
+            Reg = Nb->MakeLinkBase (Node, ((*State->PortList)[i].Link + 4), Nb);
+            Reg.Address.Register += HTHOST_LINK_CONTROL_REG;
+            Temp = 0;
+            State->HtFeatures->SetHtControlRegisterBits (Reg, 7, 6, &Temp, State);
+
+            // Gang the link
+            Nb->SetLinkRegang (Node, (*State->PortList)[i].Link, Nb);
+          }
+
+          // Set InLnSt = PHY_OFF in register table.
+          // Set sublink 0 widths to 8 bits
+          if ((*State->PortList)[i].SelWidthOut > 8) {
+            (*State->PortList)[i].SelWidthOut = 8;
+          }
+          if ((*State->PortList)[i].SelWidthIn > 8) {
+            (*State->PortList)[i].SelWidthIn = 8;
+          }
+          WidthOut = State->HtFeatures->ConvertWidthToBits ((*State->PortList)[i].SelWidthOut);
+          WidthIn = State->HtFeatures->ConvertWidthToBits ((*State->PortList)[i].SelWidthIn);
+          Temp = (WidthIn & 7) | ((WidthOut & 7) << 4);
+          Reg = Nb->MakeLinkBase (Node, (*State->PortList)[i].Link, Nb);
+          Reg.Address.Register += HTHOST_LINK_CONTROL_REG;
+          State->HtFeatures->SetHtControlRegisterBits (Reg, 31, 24, &Temp, State);
+        }
+      }
+    }
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbSystemFam15.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbSystemFam15.h
new file mode 100644
index 0000000000..b84519f337
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbSystemFam15.h
@@ -0,0 +1,93 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * System Tuning Family 15h specific routines
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 50215 $   @e \$Date: 2011-04-05 20:50:13 -0600 (Tue, 05 Apr 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/**
+ * Set the traffic distribution register for the Links provided.
+ *
+ */
+VOID
+Fam15WriteTrafficDistribution (
+  IN       UINT32       Links01,
+  IN       UINT32       Links10,
+  IN       NORTHBRIDGE  *Nb
+  );
+
+/**
+ * Write a link pair to the link pair distribution and fixups.
+ *
+ */
+VOID
+Fam15WriteLinkPairDistribution (
+  IN       UINT8        Node,
+  IN       UINT8        ConnectedNode,
+  IN       UINT8        Pair,
+  IN       BOOLEAN      Asymmetric,
+  IN       UINT8        MasterLink,
+  IN       UINT8        AlternateLink,
+  IN       NORTHBRIDGE  *Nb
+  );
+
+/**
+ * Family 15h specific tunings.
+ *
+ */
+VOID
+Fam15WriteVictimDistribution (
+  IN       UINT8        NodeA,
+  IN       UINT8        NodeB,
+  IN       UINT32       LinksAB,
+  IN       UINT32       LinksBA,
+  IN       NORTHBRIDGE  *Nb
+  );
+
+/**
+ * Family 15h specific tunings.
+ *
+ */
+VOID
+Fam15BufferOptimizations (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbUtilitiesFam15.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbUtilitiesFam15.c
new file mode 100644
index 0000000000..ec47b36309
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbUtilitiesFam15.c
@@ -0,0 +1,453 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge utility routines.
+ *
+ * These routines are needed for support of more than one feature area.
+ * Collect them in this file so build options don't remove them.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbUtilitiesFam15.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FAM15_HTNBUTILITIESFAM15_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return the number of cores (1 based count) on Node.
+ *
+ * @HtNbMethod{::F_GET_NUM_CORES_ON_NODE}
+ *
+ * @param[in]     Node   the Node that will be examined
+ * @param[in]     Nb     this northbridge
+ *
+ * @return        the number of cores
+ */
+UINT8
+Fam15GetNumCoresOnNode (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Result;
+  UINT32 Leveling;
+  UINT32 Cores;
+  UINT8 i;
+  PCI_ADDR Reg;
+
+  ASSERT ((Node < MAX_NODES));
+  // Read CmpCap
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_05,
+                                 REG_NB_CAPABILITY_2_5X84);
+
+  LibAmdPciReadBits (Reg, 7, 0, &Result, Nb->ConfigHandle);
+
+  // Support Downcoring
+  Cores = Result;
+  Cores++;
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_DOWNCORE_3X190);
+  LibAmdPciReadBits (Reg, 31, 0, &Leveling, Nb->ConfigHandle);
+  for (i = 0; i < Cores; i++) {
+    if ((Leveling & ((UINT32) 1 << i)) != 0) {
+      Result--;
+    }
+  }
+  return (UINT8) (Result + 1);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the next link for iterating over the links on a node in the correct order.
+ *
+ * @HtNbMethod{::F_GET_NEXT_LINK}
+ *
+ * Use the Internal Link field in the northbridge to prioritize internal links in the
+ * order.
+ *
+ * @param[in]     Node The node on which to iterate links.
+ * @param[in,out] Link IN: the current iteration context, OUT: the next link.
+ * @param[in]     Nb   This Northbridge, access to config pointer.
+ *
+ * @retval LinkIteratorExternal    The current Link is an external link.
+ * @retval LinkIteratorInternal    The current Link is an internal link.
+ * @retval LinkIteratorEnd         There is no next link (Link is back to BEGIN).
+ *
+ */
+LINK_ITERATOR_STATUS
+Fam15GetNextLink (
+  IN       UINT8       Node,
+  IN OUT   UINT8       *Link,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32   InternalLinks;
+  UINT32   ExternalLinks;
+  UINT32   HigherLinks;
+  BOOLEAN  IsInternalLink;
+  LINK_ITERATOR_STATUS Status;
+
+  ASSERT ((Node < MAX_NODES));
+  ASSERT ((*Link < Nb->MaxLinks) || (*Link == LINK_ITERATOR_BEGIN));
+  InternalLinks = 0;
+  ExternalLinks = 0;
+
+  // Read IntLnkRoute from the Link Initialization Status register.
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_HT_LINK_INITIALIZATION_0X1A0);
+
+  LibAmdPciReadBits (Reg, 23, 16, &InternalLinks, Nb->ConfigHandle);
+  // The external links are all possible links which are not Internal
+  ExternalLinks = (((1 << Nb->MaxLinks) - 1) ^ InternalLinks);
+  // Can't have no possible links!
+  ASSERT ((ExternalLinks != 0) || (InternalLinks != 0));
+
+
+  if (*Link == LINK_ITERATOR_BEGIN) {
+    // If the request is for the first link (BEGIN), get it
+    if (InternalLinks != 0) {
+      *Link = LibAmdBitScanForward (InternalLinks);
+      Status = LinkIteratorInternal;
+    } else {
+      *Link = LibAmdBitScanForward (ExternalLinks);
+      Status = LinkIteratorExternal;
+    }
+  } else {
+    // If the iterator is not at the beginning, search for the next Link starting from the
+    // current link.
+    HigherLinks = InternalLinks & ~((1 << (*Link + 1)) - 1);
+    IsInternalLink = (BOOLEAN) ((InternalLinks & (1 << *Link)) != 0);
+    if (IsInternalLink && (HigherLinks != 0)) {
+      // We are still on internal links and there are more to do.
+      *Link = LibAmdBitScanForward (HigherLinks);
+      Status = LinkIteratorInternal;
+    } else {
+      if (IsInternalLink) {
+        // We are transitioning now from internal to external, so get the first external link
+        HigherLinks = ExternalLinks;
+      } else {
+        // We are already iterating over external links, so get the next one
+        HigherLinks = ExternalLinks & ~((1 << (*Link + 1)) - 1);
+      }
+      if (HigherLinks != 0) {
+        *Link = LibAmdBitScanForward (HigherLinks);
+        Status = LinkIteratorExternal;
+      } else {
+        // The end of all links
+        *Link = LINK_ITERATOR_BEGIN;
+        Status = LinkIteratorEnd;
+      }
+    }
+  }
+  return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get Info about Module Type of this northbridge
+ *
+ * @HtNbMethod{::F_GET_MODULE_INFO}
+ *
+ * Provide the Processor module type, single or multi, and the node's module id.
+ *
+ * @param[in]     Node                the Node
+ * @param[out]    ModuleType          0 for Single, 1 for Multi
+ * @param[out]    Module              The module number of this node (0 if Single)
+ * @param[in]     Nb                  this northbridge
+ *
+ */
+VOID
+Fam15GetModuleInfo (
+  IN       UINT8       Node,
+     OUT   UINT8       *ModuleType,
+     OUT   UINT8       *Module,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 MultNodeCpu;
+  UINT32 IntNodeNum;
+
+  ASSERT (Node < MAX_NODES);
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_CAPABILITY_3XE8);
+  LibAmdPciReadBits (Reg, 29, 29, &MultNodeCpu, Nb->ConfigHandle);
+  LibAmdPciReadBits (Reg, 31, 30, &IntNodeNum, Nb->ConfigHandle);
+
+  *ModuleType = (UINT8) MultNodeCpu;
+  *Module = (UINT8) IntNodeNum;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Implement the hardware method of doing Socket Naming, by accessing this northbridge's Socket Id register.
+ *
+ * @HtNbMethod{::F_GET_SOCKET}
+ *
+ * The hardware socket naming method is not available for Family 15h in some packages.
+ *
+ * @param[in]   Node    The node for which we want the socket id.
+ * @param[in]   TempNode The temporary node id route where the node can be accessed.
+ * @param[in]   Nb      Our Northbridge.
+ *
+ * @return      The Socket Id
+ */
+UINT8
+Fam15GetSocket (
+  IN       UINT8       Node,
+  IN       UINT8       TempNode,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  ASSERT ((Node < MAX_NODES));
+  ASSERT (TempNode < MAX_NODES);
+  ASSERT (Nb != NULL);
+  return (Node);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Implement the hardware method of doing Socket Naming, by accessing this northbridge's Socket Id register.
+ *
+ * @HtNbMethod{::F_GET_SOCKET}
+ *
+ * The Socket Id is strapped to the Sbi Control Register, F3X1E4[6:4]SbiAddr.
+ *
+ * @param[in]   Node    The node for which we want the socket id.
+ * @param[in]   TempNode The temporary node id route where the node can be accessed.
+ * @param[in]   Nb      Our Northbridge.
+ *
+ * @return      The Socket Id
+ */
+UINT8
+Fam15StrappedGetSocket (
+  IN       UINT8       Node,
+  IN       UINT8       TempNode,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Socket;
+  PCI_ADDR Reg;
+
+  ASSERT ((TempNode < MAX_NODES));
+  ASSERT ((Node < MAX_NODES));
+  // Read SbiAddr
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (TempNode),
+                                 MakePciBusFromNode (TempNode),
+                                 MakePciDeviceFromNode (TempNode),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_SBI_CONTROL_3X1E4);
+  LibAmdPciReadBits (Reg, 6, 4, &Socket, Nb->ConfigHandle);
+  return ((UINT8) Socket);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the enable compute unit status for this node.
+ *
+ * @HtNbMethod{::F_GET_ENABLED_COMPUTE_UNITS}
+ *
+ * @param[in]   Node    The node for which we want the enabled compute units.
+ * @param[in]   Nb      Our Northbridge.
+ *
+ * @return      The Enabled Compute Unit value
+ */
+UINT8
+Fam15GetEnabledComputeUnits (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Enabled;
+  PCI_ADDR Reg;
+
+  ASSERT ((Node < MAX_NODES));
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_05,
+                                 REG_NB_COMPUTE_UNIT_5X80);
+  LibAmdPciReadBits (Reg, 3, 0, &Enabled, Nb->ConfigHandle);
+  return ((UINT8) Enabled);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the dual core compute unit status for this node.
+ *
+ * @HtNbMethod{::PF_GET_DUALCORE_COMPUTE_UNITS}
+ *
+ * @param[in]   Node    The node for which we want the dual core status
+ * @param[in]   Nb      Our Northbridge.
+ *
+ * @return      The dual core compute unit status.
+ */
+UINT8
+Fam15GetDualcoreComputeUnits (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Dual;
+  PCI_ADDR Reg;
+
+  ASSERT ((Node < MAX_NODES));
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_05,
+                                 REG_NB_COMPUTE_UNIT_5X80);
+  LibAmdPciReadBits (Reg, 19, 16, &Dual, Nb->ConfigHandle);
+  return ((UINT8) Dual);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Post info to AP cores via a mailbox.
+ *
+ * @HtNbMethod{::F_POST_MAILBOX}
+ *
+ * Use the link MCA counter register as a PCI -> MSR mailbox, for info such as node id,
+ * and module info.
+ *
+ * @param[in]     Node          the Node
+ * @param[in]     ApMailboxes   The info to post
+ * @param[in]     Nb            this northbridge
+ *
+ */
+VOID
+Fam15PostMailbox (
+  IN       UINT8 Node,
+  IN       AP_MAILBOXES ApMailboxes,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+
+  ASSERT (Node < MAX_NODES);
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_MCA_LINK_THRESHOLD_3X168);
+  LibAmdPciWriteBits (Reg, 11, 0, &ApMailboxes.ApMailInfo.Info, Nb->ConfigHandle);
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_MCA_L3_THRESHOLD_3X170);
+  LibAmdPciWriteBits (Reg, 11, 0, &ApMailboxes.ApMailExtInfo.Info, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Retrieve info from a node's mailbox.
+ *
+ * @HtNbMethod{::F_RETRIEVE_MAILBOX}
+ *
+ * Use the link MCA counter register as a PCI -> MSR mailbox, for info such as node id,
+ * and module info.
+ *
+ * @param[in]     Node          the Node
+ * @param[in]     Nb            this northbridge
+ *
+ * @return        The ap mailbox info
+ *
+ */
+AP_MAIL_INFO
+Fam15RetrieveMailbox (
+  IN       UINT8 Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  AP_MAIL_INFO ApMailInfo;
+
+  ASSERT (Node < MAX_NODES);
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_MCA_LINK_THRESHOLD_3X168);
+  LibAmdPciReadBits (Reg, 11, 0, &ApMailInfo.Info, Nb->ConfigHandle);
+  return ApMailInfo;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbUtilitiesFam15.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbUtilitiesFam15.h
new file mode 100644
index 0000000000..73ea813b6b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Fam15/htNbUtilitiesFam15.h
@@ -0,0 +1,137 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge utility routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/**
+ * Return the number of cores (1 based count) on Node.
+ *
+ */
+UINT8
+Fam15GetNumCoresOnNode (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Get the next link for iterating over the links on a node in the correct order.
+ *
+ */
+LINK_ITERATOR_STATUS
+Fam15GetNextLink (
+  IN       UINT8       Node,
+  IN OUT   UINT8       *Link,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Get Info about Module Type of this northbridge
+ *
+ */
+VOID
+Fam15GetModuleInfo (
+  IN       UINT8       Node,
+     OUT   UINT8       *ModuleType,
+     OUT   UINT8       *Module,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Implement the hardware method of doing Socket Naming, by accessing this northbridge's Socket Id register.
+ *
+ */
+UINT8
+Fam15GetSocket (
+  IN       UINT8       Node,
+  IN       UINT8       TempNode,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Implement the hardware method of doing Socket Naming, by accessing this northbridge's Socket Id register.
+ *
+ */
+UINT8
+Fam15StrappedGetSocket (
+  IN       UINT8       Node,
+  IN       UINT8       TempNode,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Get the enable compute unit status for this node.
+ */
+UINT8
+Fam15GetEnabledComputeUnits (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Get the dual core compute unit status for this node.
+ */
+UINT8
+Fam15GetDualcoreComputeUnits (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Post info to AP cores via a mailbox.
+ *
+ */
+VOID
+Fam15PostMailbox (
+  IN       UINT8 Node,
+  IN       AP_MAILBOXES ApMailboxes,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Retrieve info from a node's mailbox.
+ *
+ */
+AP_MAIL_INFO
+Fam15RetrieveMailbox (
+  IN       UINT8 Node,
+  IN       NORTHBRIDGE *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatDynamicDiscovery.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatDynamicDiscovery.c
new file mode 100644
index 0000000000..c42697ac17
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatDynamicDiscovery.c
@@ -0,0 +1,783 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Coherent Discovery Routines.
+ *
+ * Contains routines for discovery, along with Temporary routing.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNotify.h"
+#include "htNb.h"
+#include "htFeatDynamicDiscovery.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FEATURES_HTFEATDYNAMICDISCOVERY_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define LOGICAL_PROCESSOR_NONE 0xFF
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/**
+ * Status result from exploring for a new node on a link.
+ */
+typedef enum {
+  ExploreNodeStatusNew,    ///< A new node was discovered
+  ExploreNodeStatusGood,   ///< A new link to an already known node was discovered
+  ExploreNodeStatusStop,   ///< Discovery must halt now.
+  ExploreNodeStatusIgnore, ///< A new node was ignored on purpose.
+  ExploreNodeStatusMax     ///< Use for bounds check and limit only
+} EXPLORE_NODE_STATUS;
+
+/**
+ * Save all the information needed about a node at its discovery.
+ *
+ * When we can access the node at a known temporary route, read everything needed
+ * to do node to socket mapping, post to ap mailbox at later times.
+ */
+typedef struct {
+  UINT8       LogicalProcessor;     ///< Independent of Node,Socket group nodes into logical
+                                    ///< processors based on discovery.
+  UINT8       CurrentNode;          ///< The node from which discovery occurred.
+  UINT8       CurrentLink;          ///< The link on that node which we explored.
+  UINT8       PackageLink;          ///< The package level link corresponding to CurrentLink.
+  UINT8       CurrentModuleType;    ///< The current node's module type, Single or Multiple.
+  UINT8       CurrentModule;        ///< This current node's module id.
+  UINT8       HardwareSocket;       ///< Save the hardware socket strap (for hardware socket method).
+  UINT8       NewModuleType;        ///< The new node's module type, Single or Multiple.
+  UINT8       NewModule;            ///< The new node's module id.
+} NEW_NODE_SAVED_INFO_ITEM;
+
+/**
+ * A "no info" initializer for saved new node info.
+ */
+STATIC CONST NEW_NODE_SAVED_INFO_ITEM ROMDATA NoInfoSavedYet =
+{
+  LOGICAL_PROCESSOR_NONE, 0, 0, 0, 0, 0, 0, 0
+};
+
+/**
+ * A list of all the new node info, indexed by each new node's nodeid.
+ */
+typedef NEW_NODE_SAVED_INFO_ITEM (*NEW_NODE_SAVED_INFO_LIST) [MAX_NODES];
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***              GENERIC HYPERTRANSPORT DISCOVERY CODE                  ***
+ ***************************************************************************/
+
+/*-----------------------------------------------------------------------------------*/
+/**
+ * Ensure a request / response route from target Node to bsp.
+ *
+ * Since target Node is always a predecessor of actual target Node, each Node gets a
+ * route to actual target on the Link that goes to target.  The routing produced by
+ * this routine is adequate for config access during discovery, but NOT for coherency.
+ *
+ * @param[in] TargetNode     the path to actual target goes through target
+ * @param[in] ActualTarget   the ultimate target being routed to
+ * @param[in] State           our global state, port config info
+ *
+ */
+VOID
+STATIC
+routeFromBSP (
+  IN       UINT8        TargetNode,
+  IN       UINT8        ActualTarget,
+  IN       STATE_DATA   *State
+  )
+{
+  UINT8 PredecessorNode;
+  UINT8 PredecessorLink;
+  UINT8 CurrentPair;
+
+  if (TargetNode == 0) {
+    return;  //  BSP has no predecessor, stop
+  }
+
+  // Search for the Link that connects TargetNode to its predecessor
+  CurrentPair = 0;
+  while ((*State->PortList)[CurrentPair*2 + 1].NodeID != TargetNode) {
+    CurrentPair++;
+    ASSERT (CurrentPair < State->TotalLinks);
+  }
+
+  PredecessorNode = (*State->PortList)[ (CurrentPair * 2)].NodeID;
+  PredecessorLink = (*State->PortList)[ (CurrentPair * 2)].Link;
+
+  // Recursively call self to ensure the route from the BSP to the Predecessor
+  // Node is established
+  routeFromBSP (PredecessorNode, ActualTarget, State);
+
+  State->Nb->WriteRoutingTable (PredecessorNode, ActualTarget, PredecessorLink, State->Nb);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Test Compatibility of a new node, and handle failure.
+ *
+ * Make the compatibility test call for the northbridge.
+ * If the new node is incompatible, force 1P.  Notify the event.
+ * Additionally, invoke the northbridge stop link method, to
+ * implement isolation of the BSP from any incompatible node.
+ *
+ * @param[in]  CurrentNode The node we are exploring from
+ * @param[in]  CurrentLink The Link on that node to explore.
+ * @param[in]  State       Access to Northbridge interface.
+ *
+ * @retval TRUE            Check is Ok
+ * @retval FALSE           Check failed and is handled
+ */
+BOOLEAN
+STATIC
+CheckCompatible (
+  IN       UINT8       CurrentNode,
+  IN       UINT8       CurrentLink,
+  IN       STATE_DATA  *State
+  )
+{
+  UINT8 NodeToKill;
+  BOOLEAN Result;
+
+  Result = TRUE;
+
+  // Check the northbridge of the Node we just found, to make sure it is compatible
+  // before doing anything else to it.
+  //
+  if (State->Nb->IsIllegalTypeMix ((CurrentNode + 1), State->Nb)) {
+    IDS_ERROR_TRAP;
+
+    // Notify BIOS of event
+    NotifyFatalCohProcessorTypeMix (
+      CurrentNode,
+      CurrentLink,
+      State->NodesDiscovered,
+      State
+      );
+
+    // If Node is not compatible, force boot to 1P
+    // If they are not compatible stop cHT init and:
+    //     1. Disable all cHT Links on the BSP
+    //     2. Configure the BSP routing tables as a UP.
+    //     3. Notify main BIOS.
+    //
+    State->NodesDiscovered = 0;
+    State->TotalLinks = 0;
+    // Abandon our coherent Link data structure.  At this point there may
+    // be coherent Links on the BSP that are not yet in the portList, and
+    // we have to turn them off anyway.  So depend on the hardware to tell us.
+    //
+    for (CurrentLink = 0; CurrentLink < State->Nb->MaxLinks; CurrentLink++) {
+      // Stop all Links which are connected, coherent, and ready
+      if (State->Nb->VerifyLinkIsCoherent (0, CurrentLink, State->Nb)) {
+        State->Nb->StopLink (0, CurrentLink, State, State->Nb);
+      }
+    }
+
+    for (NodeToKill = 0; NodeToKill < MAX_NODES; NodeToKill++) {
+      State->Nb->WriteFullRoutingTable (0, NodeToKill, ROUTE_TO_SELF, ROUTE_TO_SELF, 0, State->Nb);
+    }
+
+    State->HtInterface->CleanMapsAfterError (State);
+
+    // End Coherent Discovery
+    Result = FALSE;
+  }
+  return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check the system MP capability with a new node and handle any failure.
+ *
+ * Invoke the northbridge MP capability check.  If it fails, notify the event and force
+ * 1P.  Should not need to stop links on the BSP.
+ *
+ * @param[in]  CurrentNode The node we are exploring from
+ * @param[in]  CurrentLink The Link on that node to explore.
+ * @param[in]  State       Access to Northbridge interface.
+ *
+ * @retval TRUE            Check is Ok
+ * @retval FALSE           Check Failed and is handled
+ */
+BOOLEAN
+STATIC
+CheckCapable (
+  IN       UINT8       CurrentNode,
+  IN       UINT8       CurrentLink,
+  IN       STATE_DATA  *State
+  )
+{
+  UINT8 NodeToKill;
+  BOOLEAN Result;
+
+  Result = TRUE;
+
+  // Check the capability of northbridges against the currently known configuration
+  if (State->Nb->IsExceededCapable ((CurrentNode + 1), State, State->Nb)) {
+    IDS_ERROR_TRAP;
+    // Notify BIOS of event
+    NotifyFatalCohMpCapMismatch (
+      CurrentNode,
+      CurrentLink,
+      State->SysMpCap,
+      State->NodesDiscovered,
+      State
+      );
+
+    State->NodesDiscovered = 0;
+    State->TotalLinks = 0;
+
+    for (NodeToKill = 0; NodeToKill < MAX_NODES; NodeToKill++) {
+      State->Nb->WriteFullRoutingTable (0, NodeToKill, ROUTE_TO_SELF, ROUTE_TO_SELF, 0, State->Nb);
+    }
+
+    State->HtInterface->CleanMapsAfterError (State);
+
+    // End Coherent Discovery
+    Result = FALSE;
+  }
+  return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Make all the tests needed to determine if a link should be added to the system data structure.
+ *
+ * The link should be added to the system data structure if it is:
+ * - not being Ignored on this boot
+ * - not having a hard failure
+ * - coherent and connected
+ * - not already in the system data structure
+ * - not subject to some special handling case.
+ * .
+ *
+ * @param[in]  CurrentNode The node we are exploring from
+ * @param[in]  CurrentLink The Link on that node to explore.
+ * @param[in]  State       Access to Northbridge interface.
+ *
+ * @retval FALSE          This link should not be added.
+ * @retval TRUE           This link should explored and added to the system.
+ */
+BOOLEAN
+STATIC
+IsLinkToAdd (
+  IN       UINT8       CurrentNode,
+  IN       UINT8       CurrentLink,
+  IN       STATE_DATA  *State
+  )
+{
+  BOOLEAN Linkfound;
+  UINTN Port;
+  FINAL_LINK_STATE FinalLinkState;
+  BOOLEAN Result;
+
+  Result = FALSE;
+
+  FinalLinkState = State->HtInterface->GetIgnoreLink (CurrentNode, CurrentLink, State->Nb->DefaultIgnoreLinkList, State);
+  if ((FinalLinkState != MATCHED) && (FinalLinkState != POWERED_OFF)) {
+    if (!State->Nb->ReadTrueLinkFailStatus (CurrentNode, CurrentLink, State, State->Nb)) {
+      // Make sure that the Link is connected, coherent, and ready
+      if (State->Nb->VerifyLinkIsCoherent (CurrentNode, CurrentLink, State->Nb)) {
+        // Test to see if the CurrentLink has already been explored
+        Linkfound = FALSE;
+        for (Port = 0; Port < State->TotalLinks; Port++) {
+          if ((((*State->PortList)[ (Port * 2 + 1)].NodeID == CurrentNode) &&
+               ((*State->PortList)[ (Port * 2 + 1)].Link == CurrentLink)) ||
+              (((*State->PortList)[ (Port * 2)].NodeID == CurrentNode) &&
+               ((*State->PortList)[ (Port * 2)].Link == CurrentLink))) {
+            Linkfound = TRUE;
+            break;
+          }
+        }
+        if (!Linkfound) {
+          if (!State->Nb->HandleSpecialLinkCase (CurrentNode, CurrentLink, State, State->Nb)) {
+            Result = TRUE;
+          }
+        }
+      }
+    }
+  } else {
+    if (FinalLinkState == POWERED_OFF) {
+      State->Nb->StopLink (CurrentNode, CurrentLink, State, State->Nb);
+    }
+  }
+  return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Explore for a new node over a link, handling whatever is found.
+ *
+ * Open a temporary route over a link on the current node.
+ * Make checks for compatibility and capability in the proper sequence.
+ * If the node found is new, set a token to it, so it will be recognized in the
+ * future, and notify an event for finding a new node.
+ * If the node is already found (token is set), just return status.
+ *
+ * @param[in]     CurrentNode         The node we are exploring from
+ * @param[in]     CurrentLink         The Link on that node to explore.
+ * @param[in]     LogicalProcessor    The processor to update in the maps.
+ * @param[in,out] NewNodeSavedInfo    The saved info for nodes in that processor.
+ * @param[in]     State               Access to Northbridge interface.
+ *
+ * @retval ExploreNodeStatusNew    A new node was found
+ * @retval ExploreNodeStatusGood   This is a good link to an already known node
+ * @retval ExploreNodeStatusStop   Stop Coherent Discovery
+ */
+EXPLORE_NODE_STATUS
+STATIC
+ExploreNode (
+  IN       UINT8       CurrentNode,
+  IN       UINT8       CurrentLink,
+  IN       UINT8       LogicalProcessor,
+  IN OUT   NEW_NODE_SAVED_INFO_LIST NewNodeSavedInfo,
+  IN       STATE_DATA  *State
+  )
+{
+  UINT8 Token;
+  EXPLORE_NODE_STATUS Status;
+
+  // Modify CurrentNode's routing table to use CurrentLink to send
+  // traffic to CurrentNode + 1
+  //
+  State->Nb->WriteRoutingTable (CurrentNode, (CurrentNode + 1), CurrentLink, State->Nb);
+  if (!State->Nb->HandleSpecialNodeCase ((CurrentNode + 1), CurrentLink, State, State->Nb)) {
+    if (CheckCompatible (CurrentNode, CurrentLink, State)) {
+      // Read Token from Current + 1
+      Token = State->Nb->ReadToken ((CurrentNode + 1), State->Nb);
+      ASSERT (Token <= State->NodesDiscovered);
+      if (Token == 0) {
+        State->NodesDiscovered++;
+        ASSERT (State->NodesDiscovered < MAX_NODES);
+        if (CheckCapable (CurrentNode, CurrentLink, State)) {
+          Token = State->NodesDiscovered;
+          State->Nb->WriteToken ((CurrentNode + 1), Token, State->Nb);
+          // Fill in Saved New Node info for the discovered node.
+          // We do this so we don't have to keep a temporary route open to it.
+          // So we save everything that might be needed to set the socket and node
+          // maps for either the software or hardware method.
+          //
+          (*NewNodeSavedInfo)[Token].LogicalProcessor = LogicalProcessor;
+          (*NewNodeSavedInfo)[Token].CurrentNode = CurrentNode;
+          (*NewNodeSavedInfo)[Token].CurrentLink = CurrentLink;
+          (*NewNodeSavedInfo)[Token].PackageLink = State->Nb->GetPackageLink (CurrentNode, CurrentLink, State->Nb);
+          (*NewNodeSavedInfo)[Token].HardwareSocket = State->Nb->GetSocket (Token, (CurrentNode + 1), State->Nb);
+          State->Nb->GetModuleInfo (
+            CurrentNode,
+            &((*NewNodeSavedInfo)[Token].CurrentModuleType),
+            &((*NewNodeSavedInfo)[Token].CurrentModule),
+            State->Nb
+            );
+          State->Nb->GetModuleInfo (
+            (CurrentNode + 1),
+            &((*NewNodeSavedInfo)[Token].NewModuleType),
+            &((*NewNodeSavedInfo)[Token].NewModule),
+            State->Nb
+            );
+
+          // Notify BIOS with info
+          NotifyInfoCohNodeDiscovered (
+            CurrentNode,
+            CurrentLink,
+            Token,
+            (CurrentNode + 1),
+            State
+            );
+          Status = ExploreNodeStatusNew;
+        } else {
+          // Failed Capable
+          Status = ExploreNodeStatusStop;
+        }
+      } else {
+        // Not a new node, token already set
+        Status = ExploreNodeStatusGood;
+      }
+    } else {
+      // Failed Compatible
+      Status = ExploreNodeStatusStop;
+    }
+  } else {
+    // Ignore this node
+    Status = ExploreNodeStatusIgnore;
+  }
+
+  return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Process all the saved new node info for the current processor.
+ *
+ * When all nodes in the processor have been discovered, we can process all the saved
+ * info about the nodes.  We add each node to the socket and node maps.
+ *
+ * @param[in]    LogicalProcessor    The processor to update in the maps.
+ * @param[in]    NewNodeSavedInfo    The saved info for nodes in that processor.
+ * @param[in]    State               Our system representation.
+ */
+VOID
+STATIC
+ProcessSavedNodeInfo (
+  IN       UINT8                    LogicalProcessor,
+  IN       NEW_NODE_SAVED_INFO_LIST NewNodeSavedInfo,
+  IN       STATE_DATA  *State
+  )
+{
+  UINT8 NewNode;
+  UINT8 HardwareSocket;
+
+  // Can't have more processors than nodes, just more (or equal) nodes than processors.
+  ASSERT (LogicalProcessor <= (State->NodesDiscovered));
+  HardwareSocket = 0xFF;
+  // Find the Hardware Socket value to use (if we are using the hardware socket naming method).
+  // The new nodes are the ones in this processor, so find the one that is module 0.
+  for (NewNode = 0; NewNode < (State->NodesDiscovered + 1); NewNode++) {
+    if (((*NewNodeSavedInfo)[NewNode].LogicalProcessor == LogicalProcessor) &&
+        ((*NewNodeSavedInfo)[NewNode].NewModule == 0)) {
+      HardwareSocket = (*NewNodeSavedInfo)[NewNode].HardwareSocket;
+      break;
+    }
+  }
+  // We must have found a result, however, the hardware socket value doesn't have to be correct
+  // unless we are using the hardware socket naming method.  Northbridge code should return the
+  // node number for the hardware socket if hardware socket strapping is not supported (i.e. no sbi).
+  ASSERT (HardwareSocket != 0xFF);
+
+  // Set the node to socket maps for this processor.  Node zero is always handled specially,
+  // so skip it in this loop.
+  for (NewNode = 1; NewNode < (State->NodesDiscovered + 1); NewNode++) {
+    if ((*NewNodeSavedInfo)[NewNode].LogicalProcessor == LogicalProcessor) {
+      // For the currently discovered logical processor, update node to socket
+      // map for all the processor's nodes.
+      State->HtInterface->SetNodeToSocketMap (
+        (*NewNodeSavedInfo)[NewNode].CurrentNode,
+        (*NewNodeSavedInfo)[NewNode].CurrentModule,
+        (*NewNodeSavedInfo)[NewNode].PackageLink,
+        NewNode,
+        HardwareSocket,
+        (*NewNodeSavedInfo)[NewNode].NewModule,
+        State);
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Create and add a new link to the system data structure.
+ *
+ * Add the two port list data structures, source first, initializing
+ * the two node ids and the link values.  The node id of the remote
+ * node is its token value.  Also, update the adjacency matrix and
+ * node degree table.
+ *
+ * @param[in]  CurrentNode The node we are exploring from
+ * @param[in]  CurrentLink The Link on that node to explore.
+ * @param[in]  TempRoute   The temporary node route that goes over that link.
+ * @param[in]  State       Access to Northbridge interface.
+ *
+ */
+VOID
+STATIC
+AddLinkToSystem (
+  IN       UINT8       CurrentNode,
+  IN       UINT8       CurrentLink,
+  IN       UINT8       TempRoute,
+  IN       STATE_DATA  *State
+  )
+{
+  UINT8 Token;
+
+  ASSERT (State->TotalLinks < MAX_PLATFORM_LINKS);
+
+  Token = State->Nb->ReadToken (TempRoute, State->Nb);
+
+  (*State->PortList)[State->TotalLinks * 2].Type = PORTLIST_TYPE_CPU;
+  (*State->PortList)[State->TotalLinks * 2].Link = CurrentLink;
+  (*State->PortList)[State->TotalLinks * 2].NodeID = CurrentNode;
+
+  (*State->PortList)[State->TotalLinks * 2 + 1].Type = PORTLIST_TYPE_CPU;
+  (*State->PortList)[State->TotalLinks * 2 + 1].Link = State->Nb->ReadDefaultLink (TempRoute, State->Nb);
+  (*State->PortList)[State->TotalLinks * 2 + 1].NodeID = Token;
+
+  State->TotalLinks++;
+
+  if ( !State->Fabric->SysMatrix[CurrentNode][Token] ) {
+    State->Fabric->SysDegree[CurrentNode]++;
+    State->Fabric->SysDegree[Token]++;
+    State->Fabric->SysMatrix[CurrentNode][Token] = TRUE;
+    State->Fabric->SysMatrix[Token][CurrentNode] = TRUE;
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Start discovery from a new node.
+ *
+ * If the node is not the BSP, establish a route between the node and the
+ * BSP for request/response.
+ * Set the node id, and enable routing on this node.  This gives us control
+ * on that node to isolate links, by specifying each link in turn as the route
+ * to a possible new node.
+ *
+ * @param[in]  CurrentNode The node we are exploring from
+ * @param[in]  State       Access to Northbridge interface.
+ *
+ */
+VOID
+STATIC
+StartFromANewNode (
+  IN       UINT8       CurrentNode,
+  IN       STATE_DATA  *State
+  )
+{
+  if (CurrentNode != 0) {
+    // Set path from BSP to CurrentNode
+    routeFromBSP (CurrentNode, CurrentNode, State);
+
+    // Set path from BSP to CurrentNode for CurrentNode + 1 if
+    // CurrentNode + 1 != MAX_NODES
+    //
+    if ((CurrentNode + 1) != MAX_NODES) {
+      routeFromBSP (CurrentNode, (CurrentNode + 1), State);
+    }
+
+    // Configure CurrentNode to route traffic to the BSP through its
+    // default Link
+    //
+    State->Nb->WriteRoutingTable (CurrentNode, 0, State->Nb->ReadDefaultLink (CurrentNode, State->Nb), State->Nb);
+  }
+
+  // Set CurrentNode's NodeID field to CurrentNode
+  State->Nb->WriteNodeID (CurrentNode, CurrentNode, State->Nb);
+
+  // Enable routing tables on CurrentNode
+  State->Nb->EnableRoutingTables (CurrentNode, State->Nb);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Back up from exploring a one-deep internal node.
+ *
+ * When a newly discovered node has internal package links to another
+ * node in the same processor, discovery moves to that node to do the
+ * internal links.  Afterwards, this routine provides recovery from that.
+ * The node needs to respond again using deflnk rather than routing, so
+ * that connections from other nodes to that one can be identified.
+ *
+ * @param[in]  CurrentNode The node we are exploring from
+ * @param[in]  State       Access to Northbridge interface.
+ *
+ */
+VOID
+STATIC
+BackUpFromANode (
+  IN       UINT8       CurrentNode,
+  IN       STATE_DATA  *State
+  )
+{
+  if (CurrentNode != 0) {
+    // Disable routing tables on CurrentNode
+    State->Nb->DisableRoutingTables (CurrentNode, State->Nb);
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Dynamically Discover all coherent devices in the system.
+ *
+ * @HtFeatMethod{::F_COHERENT_DISCOVERY}
+ *
+ * Initialize some basics like Node IDs and total Nodes found in the
+ * process. As we go we also build a representation of the discovered
+ * system which we will use later to program the routing tables.
+ * During this step, the routing is via default Link back to BSP and
+ * to each new Node on the Link it was discovered on (no coherency is
+ * active yet).
+ *
+ * In the case of multiple nodes per processor, do a one deep exploration of internal links
+ * to ensure those node pairs are always numbered n, n + 1.
+ *
+ * @param[in,out] State     our global state
+ *
+ */
+VOID
+CoherentDiscovery (
+  IN OUT   STATE_DATA *State
+  )
+{
+  UINT8 CurrentNode;
+  UINT8 OneDeepNode;
+  UINT8 OneDeepLink;
+  UINT8 CurrentLink;
+  UINT8 LogicalProcessor;
+  EXPLORE_NODE_STATUS ExplorationStatus;
+  LINK_ITERATOR_STATUS LinkIteratorStatus;
+  NEW_NODE_SAVED_INFO_ITEM NewNodeSavedInfoItems [MAX_NODES];
+  NEW_NODE_SAVED_INFO_LIST NewNodeSavedInfo;
+
+  // Initially no info exists for any node, but the BSP is part of logical processor zero.
+  for (CurrentNode = 0; CurrentNode < MAX_NODES; CurrentNode++) {
+    NewNodeSavedInfoItems [CurrentNode] = NoInfoSavedYet;
+  }
+  NewNodeSavedInfoItems[0].LogicalProcessor = 0;
+  NewNodeSavedInfoItems[0].HardwareSocket = State->Nb->GetSocket (0, 0, State->Nb);
+  State->Nb->GetModuleInfo (0, &NewNodeSavedInfoItems[0].NewModuleType, &NewNodeSavedInfoItems[0].NewModule, State->Nb);
+  NewNodeSavedInfo = (NEW_NODE_SAVED_INFO_LIST) NewNodeSavedInfoItems;
+
+  CurrentNode = 0;
+  CurrentLink = LINK_ITERATOR_BEGIN;
+  LogicalProcessor = 0;
+  // An initial status, for node zero if you will.
+  ExplorationStatus = ExploreNodeStatusGood;
+
+  //
+  // Entries are always added in pairs, the even indices are the 'source'
+  // side closest to the BSP, the odd indices are the 'destination' side
+  //
+
+  while ((CurrentNode <= State->NodesDiscovered) && (ExplorationStatus != ExploreNodeStatusStop)) {
+    StartFromANewNode (CurrentNode, State);
+
+    //
+    // Explore all internal links
+    //
+    LinkIteratorStatus = State->Nb->GetNextLink (CurrentNode, &CurrentLink, State->Nb);
+
+    while ((LinkIteratorStatus == LinkIteratorInternal) &&
+           (ExplorationStatus != ExploreNodeStatusStop)) {
+      if (IsLinkToAdd (CurrentNode, CurrentLink, State)) {
+        ExplorationStatus = ExploreNode (CurrentNode, CurrentLink, LogicalProcessor, NewNodeSavedInfo, State);
+        if ((ExplorationStatus == ExploreNodeStatusGood) ||
+            (ExplorationStatus == ExploreNodeStatusNew)) {
+          AddLinkToSystem (CurrentNode, CurrentLink, (CurrentNode + 1), State);
+        }
+      }
+      LinkIteratorStatus = State->Nb->GetNextLink (CurrentNode, &CurrentLink, State->Nb);
+    }
+    if (CurrentNode == 0) {
+      // The BSP processor is completely discovered now.
+      ProcessSavedNodeInfo (LogicalProcessor, NewNodeSavedInfo, State);
+      LogicalProcessor++;
+    }
+
+    //
+    // Explore all the external links from this node.
+    //
+
+    // Starting this iteration using the link that we last got in the iteration above.
+    while ((LinkIteratorStatus == LinkIteratorExternal) &&
+           (ExplorationStatus != ExploreNodeStatusStop)) {
+      if (IsLinkToAdd (CurrentNode, CurrentLink, State)) {
+        ExplorationStatus = ExploreNode (CurrentNode, CurrentLink, LogicalProcessor, NewNodeSavedInfo, State);
+        if (ExplorationStatus == ExploreNodeStatusNew) {
+          AddLinkToSystem (CurrentNode, CurrentLink, (CurrentNode + 1), State);
+          // If this is a new node, we need to explore to its internal mate, if any.
+          // This allows us to keep internal node pairs as ids n, n+1
+          // We use special link and node variables so we can keep our context.
+          OneDeepLink = 0xFF;
+          OneDeepNode = State->Nb->ReadToken ((CurrentNode + 1), State->Nb);
+          StartFromANewNode (OneDeepNode, State);
+          LinkIteratorStatus = State->Nb->GetNextLink (OneDeepNode, &OneDeepLink, State->Nb);
+          while ((LinkIteratorStatus == LinkIteratorInternal) &&
+                 (ExplorationStatus != ExploreNodeStatusStop)) {
+            if (IsLinkToAdd (OneDeepNode, OneDeepLink, State)) {
+              ExplorationStatus = ExploreNode (OneDeepNode, OneDeepLink, LogicalProcessor, NewNodeSavedInfo, State);
+              if ((ExplorationStatus == ExploreNodeStatusGood) ||
+                  (ExplorationStatus == ExploreNodeStatusNew)) {
+                AddLinkToSystem (OneDeepNode, OneDeepLink, (OneDeepNode + 1), State);
+              }
+            }
+            LinkIteratorStatus = State->Nb->GetNextLink (OneDeepNode, &OneDeepLink, State->Nb);
+          }
+          // Since we completed all the node's internal links, we found all the nodes in that processor.
+          ProcessSavedNodeInfo (LogicalProcessor, NewNodeSavedInfo, State);
+          LogicalProcessor++;
+          // Restore node to discoverable state.  Otherwise you can't tell what links it is connected on.
+          BackUpFromANode (OneDeepNode, State);
+        } else {
+          if (ExplorationStatus == ExploreNodeStatusGood) {
+            AddLinkToSystem (CurrentNode, CurrentLink, (CurrentNode + 1), State);
+          }
+        }
+      }
+      LinkIteratorStatus = State->Nb->GetNextLink (CurrentNode, &CurrentLink, State->Nb);
+    }
+    CurrentNode++;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatDynamicDiscovery.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatDynamicDiscovery.h
new file mode 100644
index 0000000000..25cbfdf0ef
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatDynamicDiscovery.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Coherent Discovery Interface.
+ *
+ * Contains interface to the coherent discovery feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_FEAT_DYNAMIC_DISCOVERY_H_
+#define _HT_FEAT_DYNAMIC_DISCOVERY_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Dynamically Discover all coherent devices in the system.
+ *
+ */
+VOID
+CoherentDiscovery (
+  IN OUT   STATE_DATA *State
+  );
+
+#endif  /* _HT_FEAT_DYNAMIC_DISCOVERY_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatGanging.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatGanging.c
new file mode 100644
index 0000000000..533d376871
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatGanging.c
@@ -0,0 +1,218 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Routines for re-ganging Links.
+ *
+ * Implement the reganging feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNb.h"
+#include "htFeatGanging.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FEATURES_HTFEATGANGING_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***                            Link Optimization                        ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Test the subLinks of a Link to see if they qualify to be reganged.
+ *
+ * @HtFeatMethod{::F_REGANG_LINKS}
+ *
+ * If they do, update the port list data to indicate that this should be done.
+ * @note  no actual hardware state is changed in this routine.
+ *
+ * @param[in,out] State          Our global state
+ */
+VOID
+RegangLinks (
+  IN OUT   STATE_DATA *State
+  )
+{
+  FINAL_LINK_STATE FinalLinkState;
+  UINT8 i;
+  UINT8 j;
+  for (i = 0; i < (State->TotalLinks * 2); i += 2) {
+    // Data validation
+    ASSERT ((*State->PortList)[i].Type < 2 && (*State->PortList)[i].Link < State->Nb->MaxLinks);
+    ASSERT ((*State->PortList)[i + 1].Type < 2 && (*State->PortList)[i + 1].Link < State->Nb->MaxLinks);
+
+    // Regang is false unless we pass all conditions below
+    (*State->PortList)[i].SelRegang = FALSE;
+    (*State->PortList)[i + 1].SelRegang = FALSE;
+
+    // Only process cpu to cpu Links
+    if ( ((*State->PortList)[i].Type != PORTLIST_TYPE_CPU) ||
+         ((*State->PortList)[i + 1].Type != PORTLIST_TYPE_CPU)) {
+      continue;
+    }
+
+    for (j = i + 2; j < State->TotalLinks*2; j += 2) {
+      // Only process cpu to cpu Links
+      if ( ((*State->PortList)[j].Type != PORTLIST_TYPE_CPU) ||
+           ((*State->PortList)[j + 1].Type != PORTLIST_TYPE_CPU) ) {
+        continue;
+      }
+
+      // Links must be from the same source
+      if ((*State->PortList)[i].NodeID != (*State->PortList)[j].NodeID) {
+        continue;
+      }
+
+      // Link must be to the same target
+      if ((*State->PortList)[i + 1].NodeID != (*State->PortList)[j + 1].NodeID) {
+        continue;
+      }
+
+      // Ensure same source base port
+      if (((*State->PortList)[i].Link & 3) != ((*State->PortList)[j].Link & 3)) {
+        continue;
+      }
+
+      // Ensure same destination base port
+      if (((*State->PortList)[i + 1].Link & 3) != ((*State->PortList)[j + 1].Link & 3)) {
+        continue;
+      }
+
+      // Ensure subLink0 routes to subLink0
+      if (((*State->PortList)[i].Link & 4) != ((*State->PortList)[i + 1].Link & 4)) {
+        continue;
+      }
+
+      // (therefore subLink1 routes to subLink1)
+      ASSERT (((*State->PortList)[j].Link & 4) == ((*State->PortList)[j + 1].Link & 4));
+
+      FinalLinkState = State->HtInterface->GetSkipRegang ((*State->PortList)[i].NodeID,
+                                         (*State->PortList)[i].Link & 0x03,
+                                         (*State->PortList)[i + 1].NodeID,
+                                         (*State->PortList)[i + 1].Link & 0x03,
+                                         State);
+      if (FinalLinkState == MATCHED) {
+        continue;
+      } else if (FinalLinkState == POWERED_OFF) {
+        // StopLink will be done on the sublink 1, thus OR in 4 to the link to ensure it.
+        State->Nb->StopLink ((*State->PortList)[i].NodeID, ((*State->PortList)[i].Link | 4), State, State->Nb);
+        State->Nb->StopLink ((*State->PortList)[i + 1].NodeID, ((*State->PortList)[i + 1].Link | 4), State, State->Nb);
+      }
+
+      //
+      // Create a ganged portlist entry for the two regang-able subLinks.
+      //
+      // All info will be that of subLink zero.
+      // (If Link discovery order was other than ascending, fix the .Pointer field too.)
+      //
+      //
+      if (((*State->PortList)[i].Link & 4) != 0) {
+        (*State->PortList)[i].Pointer = (*State->PortList)[j].Pointer;
+        (*State->PortList)[i + 1].Pointer = (*State->PortList)[j + 1].Pointer;
+      }
+      (*State->PortList)[i].Link &= 0x03;                       // Force to point to subLink0
+      (*State->PortList)[i + 1].Link &= 0x03;
+      // If powered off, sublink 1 is removed but the link is still 8 bits.
+      if (FinalLinkState != POWERED_OFF) {
+        (*State->PortList)[i].SelRegang = TRUE;                   // Enable Link reganging
+        (*State->PortList)[i + 1].SelRegang = TRUE;
+        (*State->PortList)[i].PrvWidthOutCap = HT_WIDTH_16_BITS;
+        (*State->PortList)[i + 1].PrvWidthOutCap = HT_WIDTH_16_BITS;
+        (*State->PortList)[i].PrvWidthInCap = HT_WIDTH_16_BITS;
+        (*State->PortList)[i + 1].PrvWidthInCap = HT_WIDTH_16_BITS;
+      }
+
+      // Delete PortList[j, j + 1], slow but easy to debug implementation
+      State->TotalLinks--;
+      LibAmdMemCopy (&((*State->PortList)[j]),
+                     &((*State->PortList)[j + 2]),
+                     sizeof (PORT_DESCRIPTOR)*(State->TotalLinks* 2 - j),
+                     State->ConfigHandle);
+      LibAmdMemFill (&((*State->PortList)[State->TotalLinks * 2]), INVALID_LINK, (sizeof (PORT_DESCRIPTOR) * 2), State->ConfigHandle);
+
+      break; // Exit loop, advance to PortList[i + 2]
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatGanging.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatGanging.h
new file mode 100644
index 0000000000..988a4cfdb3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatGanging.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Link Reganging Interface.
+ *
+ * Contains interface to the Reganging feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ *-----------------------------------------------------------------------------
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _HT_FEAT_GANGING_H_
+#define _HT_FEAT_GANGING_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Test the subLinks of a Link to see if they qualify to be reganged.
+ *
+ */
+VOID
+RegangLinks (
+  IN OUT   STATE_DATA *State
+  );
+
+#endif  /* _HT_FEAT_GANGING_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatNoncoherent.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatNoncoherent.c
new file mode 100644
index 0000000000..bde99c8dc9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatNoncoherent.c
@@ -0,0 +1,375 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Non-Coherent Discovery Routines.
+ *
+ * Contains routines for enumerating and initializing non-coherent devices.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNotify.h"
+#include "htNb.h"
+#include "htFeatNoncoherent.h"
+#include "htFeatOptimization.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FEATURES_HTFEATNONCOHERENT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define NO_DEVICE 0xFFFFFFFFull
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***                       Non-coherent init code                        ***
+ ***                             Algorithms                              ***
+ ***************************************************************************/
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Process a non-coherent Link.
+ *
+ * @HtFeatMethod{::F_PROCESS_LINK}
+ *
+ * Enable a range of bus numbers, and set the device ID for all devices found.  Add
+ * non-coherent devices, links to the system data structure.
+ *
+ * @param[in]     Node          Node on which to process nc init
+ * @param[in]     Link          The non-coherent Link on that Node
+ * @param[in]     IsCompatChain Is this the chain with the southbridge? TRUE if yes.
+ * @param[in,out] State         our global state
+ */
+VOID
+ProcessLink (
+  IN       UINT8         Node,
+  IN       UINT8         Link,
+  IN       BOOLEAN       IsCompatChain,
+  IN OUT   STATE_DATA    *State
+  )
+{
+  UINT8 SecBus;
+  UINT8 SubBus;
+  UINT32 CurrentBuid;
+  UINT32 Temp;
+  UINT32 UnitIdCount;
+  PCI_ADDR CurrentPtr;
+  PCI_ADDR Link1ControlRegister;
+  UINT8 Depth;
+  BUID_SWAP_LIST *SwapPtr;
+  UINT8  LastLink;
+  BOOLEAN IsCaveDevice;
+
+  ASSERT ((Node < MAX_NODES) && (Link < State->Nb->MaxLinks));
+
+  if (!State->HtInterface->GetOverrideBusNumbers (Node, Link, &SecBus, &SubBus, State)) {
+    // Assign Bus numbers
+    if (State->AutoBusCurrent >= State->HtBlock->AutoBusMax) {
+      //  If we run out of Bus Numbers, notify and skip this chain
+      //
+      IDS_ERROR_TRAP;
+      NotifyErrorNcohBusMaxExceed (Node, Link, State->AutoBusCurrent, State);
+      return;
+    }
+
+    if (State->UsedCfgMapEntries >= 4) {
+      // If we have used all the PCI Config maps we can't add another chain.
+      // Notify and if call back is unimplemented or returns, skip this chain.
+      //
+      IDS_ERROR_TRAP;
+      NotifyErrorNcohCfgMapExceed (Node, Link, State);
+      return;
+    }
+
+    SecBus = State->AutoBusCurrent;
+    SubBus = SecBus + State->HtBlock->AutoBusIncrement - 1;
+    State->AutoBusCurrent = State->AutoBusCurrent + State->HtBlock->AutoBusIncrement;
+  }
+
+  State->Nb->SetConfigAddrMap (State->UsedCfgMapEntries, SecBus, SubBus, Node, Link, State, State->Nb);
+  State->UsedCfgMapEntries++;
+
+  if (State->HtInterface->GetManualBuidSwapList (Node, Link, &SwapPtr, State)) {
+    // Manual non-coherent BUID assignment
+    AGESA_TESTPOINT (TpProcHtManualNc, State->ConfigHandle);
+
+
+    if (!IsCompatChain || !State->IsUsingRecoveryHt) {
+      //  If this is the not southbridge chain or Recovery HT was not used
+      // then we need to assign BUIDs here.
+      //
+      Depth = 0;
+      // Assign BUID's per manual override
+      while (SwapPtr->Swaps[Depth].FromId != 0xFF) {
+        CurrentPtr.AddressValue = MAKE_SBDFO (0, SecBus, SwapPtr->Swaps[Depth].FromId, 0, 0);
+        if (DoesDeviceHaveHtSubtypeCap (CurrentPtr, HT_SLAVE_CAPABILITY, &CurrentPtr, State)) {
+          // Set the device's BUID field [20:16] to the current buid
+          CurrentBuid = SwapPtr->Swaps[Depth].ToId;
+          LibAmdPciWriteBits (CurrentPtr, 20, 16, &CurrentBuid, State->ConfigHandle);
+          Depth++;
+        } else {
+          // All non-coherent devices must have a slave interface capability.
+          ASSERT (FALSE);
+          break;
+        }
+      }
+    }
+
+    // Build chain of devices. Do this even if Recovery HT assign BUIDs for this chain.
+    Depth = 0;
+    while (SwapPtr->FinalIds[Depth] != 0xFF) {
+      ASSERT (State->TotalLinks < MAX_PLATFORM_LINKS);
+      (*State->PortList)[(State->TotalLinks * 2)].NodeID = Node;
+      // Note: depth == 0 is true before depth > 0. This makes LastLink variable work.
+      if (Depth == 0) {
+        (*State->PortList)[(State->TotalLinks * 2)].Type = PORTLIST_TYPE_CPU;
+        (*State->PortList)[(State->TotalLinks * 2)].Link = Link;
+      } else {
+        // Fill in the host side port.  Link and base pointer can be deduced from the upstream link's
+        // downstream port.
+        (*State->PortList)[(State->TotalLinks * 2)].Type = PORTLIST_TYPE_IO;
+        (*State->PortList)[(State->TotalLinks * 2)].Link = 1 - (*State->PortList)[(((State->TotalLinks - 1) * 2) + 1)].Link;
+        (*State->PortList)[(State->TotalLinks * 2)].HostLink = Link;
+        (*State->PortList)[(State->TotalLinks * 2)].HostDepth = Depth - 1;
+        (*State->PortList)[(State->TotalLinks * 2)].Pointer = (*State->PortList)[(((State->TotalLinks - 1) * 2) + 1)].Pointer;
+      }
+
+      (*State->PortList)[(State->TotalLinks * 2) + 1].Type = PORTLIST_TYPE_IO;
+      (*State->PortList)[(State->TotalLinks * 2) + 1].NodeID = Node;
+      (*State->PortList)[(State->TotalLinks * 2) + 1].HostLink = Link;
+      (*State->PortList)[(State->TotalLinks * 2) + 1].HostDepth = Depth;
+
+      CurrentPtr.AddressValue = MAKE_SBDFO (0, SecBus, (SwapPtr->FinalIds[Depth] & 0x3F), 0, 0);
+      if (DoesDeviceHaveHtSubtypeCap (CurrentPtr, HT_SLAVE_CAPABILITY, &CurrentPtr, State)) {
+        (*State->PortList)[(State->TotalLinks * 2) + 1].Pointer = CurrentPtr;
+      } else {
+        // All non-coherent devices must have a slave interface capability.
+        ASSERT (FALSE);
+        break;
+      }
+
+      // Bit 6 indicates whether orientation override is desired.
+      // Bit 7 indicates the upstream Link if overriding.
+      //
+      // assert catches at least the one known incorrect setting, that a non-zero link
+      // is specified, but override desired is not set.
+      ASSERT (((SwapPtr->FinalIds[Depth] & 0x40) != 0) || ((SwapPtr->FinalIds[Depth] & 0x80) == 0));
+      if ((SwapPtr->FinalIds[Depth] & 0x40) != 0) {
+        // Override the device's orientation
+        LastLink = SwapPtr->FinalIds[Depth] >> 7;
+      } else {
+        // Detect the device's orientation, by reading the Master Host bit [26]
+        LibAmdPciReadBits (CurrentPtr, 26, 26, &Temp, State->ConfigHandle);
+        LastLink = (UINT8)Temp;
+      }
+      (*State->PortList)[(State->TotalLinks * 2) + 1].Link = LastLink;
+
+      Depth++;
+      State->TotalLinks++;
+    }
+  } else {
+    // Automatic non-coherent device detection
+    AGESA_TESTPOINT (TpProcHtAutoNc, State->ConfigHandle);
+    IDS_HDT_CONSOLE (HT_TRACE, "Auto IO chain init on node=%d, link=%d, secbus=%d, subbus=%d%s.\n",
+                     Node, Link, SecBus, SubBus, (IsCompatChain ? ", Compat" : ""));
+    Depth = 0;
+    CurrentBuid = 1;
+    for (; ; ) {
+      CurrentPtr.AddressValue = MAKE_SBDFO (0, SecBus, 0, 0, 0);
+
+      LibAmdPciRead (AccessWidth32, CurrentPtr, &Temp, State->ConfigHandle);
+      if (Temp == NO_DEVICE) {
+        if (IsCompatChain && State->IsUsingRecoveryHt) {
+          // See if the device is aleady at a non-zero BUID because HT Init Reset aleady assigned it.
+          CurrentPtr.Address.Device = CurrentBuid;
+          LibAmdPciRead (AccessWidth32, CurrentPtr, &Temp, State->ConfigHandle);
+          if (Temp == NO_DEVICE) {
+            // No more devices already assigned.
+            break;
+          }
+        } else {
+          // No more devices found.
+          break;
+        }
+      }
+
+      ASSERT (State->TotalLinks < MAX_PLATFORM_LINKS);
+
+      (*State->PortList)[(State->TotalLinks * 2)].NodeID = Node;
+      if (Depth == 0) {
+        (*State->PortList)[(State->TotalLinks * 2)].Type = PORTLIST_TYPE_CPU;
+        (*State->PortList)[(State->TotalLinks * 2)].Link = Link;
+      } else {
+        // Fill in the host side port.  Link and base pointer can be deduced from the upstream link's
+        // downstream port.
+        (*State->PortList)[(State->TotalLinks * 2)].Type = PORTLIST_TYPE_IO;
+        (*State->PortList)[(State->TotalLinks * 2)].Link = 1 - (*State->PortList)[((State->TotalLinks - 1) * 2) + 1].Link;
+        (*State->PortList)[(State->TotalLinks * 2)].HostLink = Link;
+        (*State->PortList)[(State->TotalLinks * 2)].HostDepth = Depth - 1;
+        (*State->PortList)[(State->TotalLinks * 2)].Pointer = (*State->PortList)[((State->TotalLinks - 1) * 2) + 1].Pointer;
+      }
+
+      (*State->PortList)[(State->TotalLinks * 2) + 1].Type = PORTLIST_TYPE_IO;
+      (*State->PortList)[(State->TotalLinks * 2) + 1].NodeID = Node;
+      (*State->PortList)[(State->TotalLinks * 2) + 1].HostLink = Link;
+      (*State->PortList)[(State->TotalLinks * 2) + 1].HostDepth = Depth;
+
+      if (DoesDeviceHaveHtSubtypeCap (CurrentPtr, HT_SLAVE_CAPABILITY, &CurrentPtr, State)) {
+
+        // Get device's unit id count [25:21]
+        LibAmdPciReadBits (CurrentPtr, 25, 21, &UnitIdCount, State->ConfigHandle);
+        if (((UnitIdCount + CurrentBuid) > MAX_BUID) || ((SecBus == 0) && ((UnitIdCount + CurrentBuid) > 24))) {
+          // An error handler for the case where we run out of BUID's on a chain
+          NotifyErrorNcohBuidExceed (Node, Link, Depth, (UINT8)CurrentBuid, (UINT8)UnitIdCount, State);
+          IDS_ERROR_TRAP;
+          break;
+        }
+        // While we are still certain we are accessing this device, remember if it is a cave device.
+        // This is found by reading EOC from the Link 1 Control Register.
+        Link1ControlRegister = CurrentPtr;
+        Link1ControlRegister.Address.Register += (HTSLAVE_LINK01_OFFSET + HTSLAVE_LINK_CONTROL_0_REG);
+        LibAmdPciReadBits (Link1ControlRegister, 6, 6, &Temp, State->ConfigHandle);
+        IsCaveDevice = ((Temp == 0) ? FALSE : TRUE);
+
+        // Attempt to write the new BUID.  Unless this chain was aleady assigned BUIDs during Init Reset,
+        // then just re-discover the chain.  Note this may be true whether the device was found at
+        // BUID zero or not.
+        IDS_HDT_CONSOLE (HT_TRACE, "Found device at depth=%d, BUID=%d.\n", Depth, CurrentPtr.Address.Device);
+        if (!IsCompatChain || !State->IsUsingRecoveryHt) {
+          IDS_HDT_CONSOLE (HT_TRACE, "Assigning device to BUID=%d.\n", CurrentBuid);
+          LibAmdPciWriteBits (CurrentPtr, 20, 16, &CurrentBuid, State->ConfigHandle);
+        }
+
+        CurrentPtr.Address.Device = CurrentBuid;
+        LibAmdPciReadBits (CurrentPtr, 20, 16, &Temp, State->ConfigHandle);
+        if (Temp != CurrentBuid) {
+          if ((Depth == 0) && IsCaveDevice) {
+            // If the chain only consists of a single cave device, that device may have retained zero
+            // for it's BUID.
+            CurrentPtr.Address.Device = 0;
+            LibAmdPciReadBits (CurrentPtr, 20, 16, &Temp, State->ConfigHandle);
+            if (Temp == 0) {
+              // Per HyperTransport specification, devices not accepting BUID reassignment hardwire BUID to zero.
+              (*State->PortList)[(State->TotalLinks * 2) + 1].Link = 0;
+              (*State->PortList)[(State->TotalLinks * 2) + 1].Pointer = CurrentPtr;
+              State->TotalLinks++;
+              Depth++;
+              // Success!
+              IDS_HDT_CONSOLE (HT_TRACE, "%s Cave left at BUID=0.\n", ((!IsCompatChain || !State->IsUsingRecoveryHt) ? "Compatible" : "Already Assigned"));
+              break;
+            } else if (Temp == CurrentBuid) {
+              // and then, there are the other kind of devices ....
+              // Restore the writable BUID field (which contains the value we just wrote) to zero.
+              Temp = 0;
+              LibAmdPciWriteBits (CurrentPtr, 20, 16, &Temp, State->ConfigHandle);
+              (*State->PortList)[(State->TotalLinks * 2) + 1].Link = 0;
+              (*State->PortList)[(State->TotalLinks * 2) + 1].Pointer = CurrentPtr;
+              State->TotalLinks++;
+              Depth++;
+              // Success!
+              IDS_HDT_CONSOLE (HT_TRACE, "Cave left at BUID=0.\n");
+              break;
+            }
+          }
+          // An error handler for this error,
+          // this often occurs in new BIOS ports and it means you need to use a Manual BUID Swap List.
+          NotifyErrorNcohDeviceFailed (Node, Link, Depth, (UINT8)CurrentBuid, State);
+          IDS_ERROR_TRAP;
+          break;
+        }
+
+        LibAmdPciReadBits (CurrentPtr, 26, 26, &Temp, State->ConfigHandle);
+        (*State->PortList)[(State->TotalLinks * 2) + 1].Link = (UINT8)Temp;
+        (*State->PortList)[(State->TotalLinks * 2) + 1].Pointer = CurrentPtr;
+
+        IDS_HDT_CONSOLE (HT_TRACE, "Device assigned.\n");
+        Depth++;
+        State->TotalLinks++;
+        CurrentBuid += UnitIdCount;
+      } else {
+        // All non-coherent devices must have a slave interface capability.
+        ASSERT (FALSE);
+        break;
+      }
+    }
+    // Provide information on automatic device results
+    NotifyInfoNcohAutoDepth (Node, Link, (Depth - 1), State);
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatNoncoherent.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatNoncoherent.h
new file mode 100644
index 0000000000..7293fbb8da
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatNoncoherent.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Non-Coherent Discovery Interface.
+ *
+ * Contains interface to the Non-Coherent Link processing feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _HT_FEAT_NONCOHERENT_H_
+#define _HT_FEAT_NONCOHERENT_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Process a non-coherent Link.
+ *
+ */
+VOID
+ProcessLink (
+  IN       UINT8         Node,
+  IN       UINT8         Link,
+  IN       BOOLEAN       IsCompatChain,
+  IN OUT   STATE_DATA    *State
+  );
+
+#endif  /* _HT_FEAT_NONCOHERENT_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatOptimization.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatOptimization.c
new file mode 100644
index 0000000000..c1e20bde3f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatOptimization.c
@@ -0,0 +1,890 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Link Optimization Routines.
+ *
+ * Contains routines for determining width, frequency, and other
+ * Link features
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "IdsHt.h"
+#include "htInterface.h"
+#include "htNb.h"
+#include "htFeatOptimization.h"
+#include "htNotify.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FEATURES_HTFEATOPTIMIZATION_FILECODE
+
+extern CONST PF_HtIdsGetPortOverride ROMDATA pf_HtIdsGetPortOverride;
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define PCI_CONFIG_COMMAND_REG04  4
+#define PCI_CONFIG_REVISION_REG08 8
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***                            Link Optimization                        ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Given the bits set in the register field, return the width it represents.
+ *
+ * As invalid width values or encodings are rare except during debug, catch those using
+ * ASSERT().  This means theoretically we are returning an incorrect result if that
+ * happens.  The default chosen for the result is arbitrarily 8 bits.  This is likely
+ * not to be the actual correct width and may cause a crash, hang, or incorrect operation.
+ * Hardware often ignores writes of invalid width encodings.
+ *
+ * @note This routine is used for CPUs as well as IO devices, as all comply to the
+ * "HyperTransport I/O Link Specification ".
+ *
+ * @param[in]     Value The bits for the register
+ *
+ * @return The width
+ */
+UINT8
+STATIC
+ConvertBitsToWidth (
+  IN       UINT8       Value
+  )
+{
+  UINT8 Result;
+
+  Result = 0;
+
+  switch (Value) {
+
+  case  1:
+    Result = 16;
+    break;
+
+  case  0:
+    Result = 8;
+    break;
+
+  case 3:
+    Result = 32;
+    break;
+
+  case  5:
+    Result = 4;
+    break;
+
+  case  4:
+    Result = 2;
+    break;
+
+  default:
+    ASSERT (FALSE);
+  }
+  return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Translate a desired width setting to the bits to set in the register field.
+ *
+ * As invalid width values or encodings are rare except during debug, catch those using
+ * ASSERT().  This means theoretically we are returning an incorrect result if that
+ * happens.  The default chosen for the result is arbitrarily 8 bits.  This is likely
+ * not to be the actual correct width and may cause a crash, hang, or incorrect operation.
+ * Hardware often ignores writes of invalid width encodings.
+ *
+ * @note This routine is used for CPUs as well as IO devices, as all comply to the
+ * "HyperTransport I/O Link Specification ".
+ *
+ * @param[in]     Value   the width Value
+ *
+ * @return The bits for the register
+ */
+UINT8
+ConvertWidthToBits (
+  IN       UINT8       Value
+  )
+{
+  UINT8 Result;
+
+  Result = 8;
+
+  switch (Value) {
+
+  case 16:
+    Result = 1;
+    break;
+
+  case 8:
+    Result = 0;
+    break;
+
+  case 32:
+    Result = 3;
+    break;
+
+  case 4:
+    Result = 5;
+    break;
+
+  case 2:
+    Result = 4;
+    break;
+
+  default:
+    ASSERT (FALSE);
+  }
+  return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Access HT Link Control Register.
+ *
+ * @HtFeatMethod{::F_SET_HT_CONTROL_REGISTER_BITS}
+ *
+ * Provide a common routine for accessing the HT Link Control registers (84, a4, c4,
+ * e4), to enforce not clearing the HT CRC error bits.  Replaces direct use of
+ * AmdPCIWriteBits().
+ *
+ * @note: This routine is called for CPUs as well as IO Devices! All comply to the
+ * "HyperTransport I/O Link Specification ".
+ *
+ * @param[in]     Reg      the PCI config address the control register
+ * @param[in]     HiBit    the high bit number
+ * @param[in]     LoBit    the low bit number
+ * @param[in]     Value    the value to write to that bit range. Bit 0 => loBit.
+ * @param[in]     State    Our state, config handle for lib
+ */
+VOID
+SetHtControlRegisterBits (
+  IN       PCI_ADDR    Reg,
+  IN       UINT8       HiBit,
+  IN       UINT8       LoBit,
+  IN       UINT32      *Value,
+  IN       STATE_DATA  *State
+  )
+{
+  UINT32 Temp;
+  UINT32 mask;
+
+  ASSERT ((HiBit < 32) && (LoBit < 32) && (HiBit >= LoBit) && ((Reg.AddressValue & 0x3) == 0));
+  ASSERT ((HiBit < 8) || (LoBit > 9));
+
+  // A 1 << 32 == 1 << 0 due to x86 SHL instruction, so skip if that is the case
+  if ((HiBit - LoBit) != 31) {
+    mask = (((UINT32)1 << (HiBit - LoBit + 1)) - 1);
+  } else {
+    mask = (UINT32)0xFFFFFFFF;
+  }
+
+  LibAmdPciRead (AccessWidth32, Reg, &Temp, State->ConfigHandle);
+  Temp &= ~(mask << LoBit);
+  Temp |= (*Value & mask) << LoBit;
+  Temp &= (UINT32)HT_CONTROL_CLEAR_CRC;
+  LibAmdPciWrite (AccessWidth32, Reg, &Temp, State->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set HT Frequency register for IO Devices
+ *
+ * Provide a common routine for accessing the HT Link Frequency registers at offset 8
+ * and 0x10, to enforce not clearing the HT Link error bits.  Replaces direct use of
+ * AmdPCIWriteBits().
+ *
+ * @note This routine is called for IO Devices only!! All comply to the
+ * "HyperTransport I/O Link Specification ".
+ *
+ * @param[in]    Reg       the PCI config address the control register
+ * @param[in]    Hibit     the high bit number
+ * @param[in]    Lobit     the low bit number
+ * @param[in]    Value     the value to write to that bit range. Bit 0 => loBit.
+ * @param[in]    State     Our state, config handle for lib
+ */
+VOID
+STATIC
+SetHtIoFrequencyRegisterBits (
+  IN       PCI_ADDR    Reg,
+  IN       UINT8       Hibit,
+  IN       UINT8       Lobit,
+  IN       UINT32      *Value,
+  IN       STATE_DATA  *State
+  )
+{
+  UINT32 Mask;
+  UINT32 Temp;
+
+  ASSERT ((Hibit < 32) && (Lobit < 32) && (Hibit >= Lobit) && ((Reg.AddressValue & 0x3) == 0));
+  ASSERT ((Hibit < 12) || (Lobit > 14));
+
+  // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+  if ((Hibit - Lobit) != 31) {
+    Mask = (((UINT32)1 << ((Hibit - Lobit) + 1)) - 1);
+  } else {
+    Mask = (UINT32)0xFFFFFFFF;
+  }
+
+  LibAmdPciRead (AccessWidth32, Reg, &Temp, State->ConfigHandle);
+  Temp &= ~(Mask << Lobit);
+  Temp |= (*Value & Mask) << Lobit;
+  Temp &= (UINT32)HT_FREQUENCY_CLEAR_LINK_ERRORS;
+  LibAmdPciWrite (AccessWidth32, Reg, &Temp, State->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get Link features into system data structure.
+ *
+ * @HtFeatMethod{::F_GATHER_LINK_DATA}
+ *
+ * For all discovered Links, populate the port list with the frequency and width
+ * capabilities. Gather support data for:
+ * - Unit ID Clumping
+ *
+ * @param[in]     State our global state, port list
+ */
+VOID
+GatherLinkData (
+  IN       STATE_DATA *State
+  )
+{
+  UINT8 i;
+  PCI_ADDR LinkBase;
+  PCI_ADDR Reg;
+  UINT32 Bits;
+  UINT8 Revision;
+
+  // Get the capability base for whatever device type the link port is on
+  for (i = 0; i < (State->TotalLinks * 2); i++) {
+    if ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) {
+      LinkBase = State->Nb->MakeLinkBase ((*State->PortList)[i].NodeID, (*State->PortList)[i].Link, State->Nb);
+      (*State->PortList)[i].Pointer = LinkBase;
+    } else {
+      LinkBase = (*State->PortList)[i].Pointer;
+      if ((*State->PortList)[i].Link == 1) {
+        LinkBase.Address.Register += HTSLAVE_LINK01_OFFSET;
+      }
+    }
+
+    // Getting the Width is standard across device types
+    Reg = LinkBase;
+    Reg.Address.Register += HTSLAVE_LINK_CONTROL_0_REG;
+    LibAmdPciReadBits (Reg, 22, 20, &Bits, State->ConfigHandle);
+    (*State->PortList)[i].PrvWidthOutCap = ConvertBitsToWidth ((UINT8)Bits);
+
+    LibAmdPciReadBits (Reg, 18, 16, &Bits, State->ConfigHandle);
+    (*State->PortList)[i].PrvWidthInCap = ConvertBitsToWidth ((UINT8)Bits);
+
+    // Get Frequency and other device type specific features
+    if ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) {
+      State->Nb->GatherLinkFeatures (&(*State->PortList)[i], State->HtInterface, State->PlatformConfiguration, State->Nb);
+    } else {
+      Reg = LinkBase;
+      Reg.Address.Register += HTSLAVE_FREQ_REV_0_REG;
+      LibAmdPciReadBits (Reg, 31, 16, &Bits, State->ConfigHandle);
+      (*State->PortList)[i].PrvFrequencyCap = Bits;
+
+      // Unit ID Clumping Support
+      if (State->IsUsingUnitIdClumping) {
+        if (DoesDeviceHaveHtSubtypeCap (LinkBase, HT_UNITID_CAPABILITY, &Reg, State)) {
+          Reg.Address.Register += HTUNIT_SUPPORT_REG;
+          LibAmdPciReadBits (Reg, 31, 0, &Bits, State->ConfigHandle);
+        } else {
+          // Not there, that's ok, we don't know that it should have one.
+          // Check for Passive support. (Bit 0 won't be set if full support is implemented,
+          // so we can use it to indicate passive support in our portlist struct).
+          Reg = LinkBase;
+          Reg.Address.Register += HTSLAVE_FEATURECAP_REG;
+          Bits = 1;
+          LibAmdPciWriteBits (Reg, 5, 5, &Bits, State->ConfigHandle);
+          LibAmdPciReadBits (Reg, 5, 5, &Bits, State->ConfigHandle);
+        }
+        (*State->PortList)[i].ClumpingSupport = Bits;
+      } else {
+        (*State->PortList)[i].ClumpingSupport = HT_CLUMPING_DISABLE;
+      }
+
+      Reg = LinkBase;
+      Reg.Address.Register = PCI_CONFIG_REVISION_REG08;
+      LibAmdPciReadBits ( LinkBase, 7, 0, &Bits, State->ConfigHandle);
+      Revision = (UINT8) Bits;
+
+      LinkBase.Address.Register = 0;
+      LibAmdPciRead (AccessWidth32, LinkBase, &Bits, State->ConfigHandle);
+
+      State->HtInterface->GetDeviceCapOverride ((*State->PortList)[i].NodeID,
+                           (*State->PortList)[i].HostLink,
+                           (*State->PortList)[i].HostDepth,
+                           (*State->PortList)[i].Pointer,
+                           Bits,
+                           Revision,
+                           (*State->PortList)[i].Link,
+                           &((*State->PortList)[i].PrvWidthInCap),
+                           &((*State->PortList)[i].PrvWidthOutCap),
+                           &((*State->PortList)[i].PrvFrequencyCap),
+                           &((*State->PortList)[i].ClumpingSupport),
+                           State);
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Optimize Links.
+ *
+ * @HtFeatMethod{::F_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY}
+ *
+ * For all Links:
+ * Examine both sides of a Link and determine the optimal frequency and width,
+ * taking into account externally provided limits and enforcing any other limit
+ * or matching rules as applicable except subLink balancing. Update the port
+ * list data with the optimal settings.
+ *
+ * @note no hardware state changes in this routine.
+ *
+ * @param[in,out]    State         Process and update portlist
+ */
+VOID
+SelectOptimalWidthAndFrequency (
+  IN OUT   STATE_DATA   *State
+  )
+{
+  UINT8 i;
+  UINT8 j;
+  UINT8 Freq;
+  UINT32 Temp;
+  UINT32 CbPcbFreqLimit;
+  UINT8 CbPcbABDownstreamWidth;
+  UINT8 CbPcbBAUpstreamWidth;
+
+  for (i = 0; i < (State->TotalLinks * 2); i += 2) {
+    CbPcbFreqLimit = HT_FREQUENCY_NO_LIMIT;
+    CbPcbABDownstreamWidth = HT_WIDTH_16_BITS;
+    CbPcbBAUpstreamWidth = HT_WIDTH_16_BITS;
+
+    if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) && ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_CPU)) {
+      State->HtInterface->GetCpu2CpuPcbLimits ((*State->PortList)[i].NodeID,
+                           (*State->PortList)[i].Link,
+                           (*State->PortList)[i + 1].NodeID,
+                           (*State->PortList)[i + 1].Link,
+                           &CbPcbABDownstreamWidth,
+                           &CbPcbBAUpstreamWidth,
+                           &CbPcbFreqLimit,
+                           State
+        );
+    } else {
+      State->HtInterface->GetIoPcbLimits ((*State->PortList)[i + 1].NodeID,
+                      (*State->PortList)[i + 1].HostLink,
+                      (*State->PortList)[i + 1].HostDepth,
+                      &CbPcbABDownstreamWidth,
+                      &CbPcbBAUpstreamWidth,
+                      &CbPcbFreqLimit,
+                      State
+        );
+    }
+
+    Temp = (*State->PortList)[i].PrvFrequencyCap;
+    Temp &= (*State->PortList)[i + 1].PrvFrequencyCap;
+    Temp &= CbPcbFreqLimit;
+    (*State->PortList)[i].CompositeFrequencyCap = (UINT32)Temp;
+    (*State->PortList)[i + 1].CompositeFrequencyCap = (UINT32)Temp;
+
+    ASSERT (Temp != 0);
+    Freq = LibAmdBitScanReverse (Temp);
+    (*State->PortList)[i].SelFrequency = Freq;
+    (*State->PortList)[i + 1].SelFrequency = Freq;
+
+    Temp = (*State->PortList)[i].PrvWidthOutCap;
+    if ((*State->PortList)[i + 1].PrvWidthInCap < Temp) {
+      Temp = (*State->PortList)[i + 1].PrvWidthInCap;
+    }
+    if (CbPcbABDownstreamWidth < Temp) {
+      Temp = CbPcbABDownstreamWidth;
+    }
+    (*State->PortList)[i].SelWidthOut = (UINT8)Temp;
+    (*State->PortList)[i + 1].SelWidthIn = (UINT8)Temp;
+
+    Temp = (*State->PortList)[i].PrvWidthInCap;
+    if ((*State->PortList)[i + 1].PrvWidthOutCap < Temp) {
+      Temp = (*State->PortList)[i + 1].PrvWidthOutCap;
+    }
+    if (CbPcbBAUpstreamWidth < Temp) {
+      Temp = CbPcbBAUpstreamWidth;
+    }
+    (*State->PortList)[i].SelWidthIn = (UINT8)Temp;
+    (*State->PortList)[i + 1].SelWidthOut = (UINT8)Temp;
+  }
+  // Calculate unit id clumping
+  //
+  // Find the root of each IO Chain, process the chain for clumping support.
+  // The root is always the first link of the chain in the port list.
+  // Clumping is not device link specific, so we can just look at the upstream ports (j+1). Use ASSERTs to sanity
+  // check the downstream ports (j).  If any device on the chain does not support clumping, the entire chain will be
+  // disabled for clumping.
+  // After analyzing the clumping support on the chain the CPU's portlist has the enable mask.  Update all the
+  // IO Devices on the chain with the enable mask.  If any device's only have passive support, that is already enabled.
+  //
+  if (State->IsUsingUnitIdClumping) {
+    for (i = 0; i < (State->TotalLinks * 2); i += 2) {
+      if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) && ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_IO)) {
+        (*State->PortList)[i].ClumpingSupport = HT_CLUMPING_DISABLE;
+        if ((*State->PortList)[i + 1].ClumpingSupport != HT_CLUMPING_DISABLE) {
+          (*State->PortList)[i].ClumpingSupport |= (*State->PortList)[i + 1].ClumpingSupport;
+          for (j = i + 2; j < (State->TotalLinks * 2); j += 2) {
+            if (((*State->PortList)[j].Type == PORTLIST_TYPE_IO) && ((*State->PortList)[j + 1].Type == PORTLIST_TYPE_IO)) {
+              if (((*State->PortList)[i].NodeID == (*State->PortList)[j + 1].NodeID) &&
+                  ((*State->PortList)[i].Link == (*State->PortList)[j + 1].HostLink)) {
+                ASSERT (((*State->PortList)[i].NodeID == (*State->PortList)[j + 1].NodeID) &&
+                        ((*State->PortList)[i].Link == (*State->PortList)[j].HostLink));
+                if ((*State->PortList)[j + 1].ClumpingSupport != HT_CLUMPING_DISABLE) {
+                  ASSERT ((((*State->PortList)[j + 1].ClumpingSupport & HT_CLUMPING_PASSIVE) == 0) ||
+                          (((*State->PortList)[j + 1].ClumpingSupport & ~(HT_CLUMPING_PASSIVE)) == 0));
+                  (*State->PortList)[i].ClumpingSupport |= (*State->PortList)[j + 1].ClumpingSupport;
+                } else {
+                  (*State->PortList)[i].ClumpingSupport = HT_CLUMPING_DISABLE;
+                  break;
+                }
+              }
+            }
+          }
+          if ((*State->PortList)[i + 1].ClumpingSupport != HT_CLUMPING_PASSIVE) {
+            (*State->PortList)[i + 1].ClumpingSupport = (*State->PortList)[i].ClumpingSupport;
+          }
+          for (j = i + 2; j < (State->TotalLinks * 2); j += 2) {
+            if (((*State->PortList)[j].Type == PORTLIST_TYPE_IO) && ((*State->PortList)[j + 1].Type == PORTLIST_TYPE_IO)) {
+              if (((*State->PortList)[i].NodeID == (*State->PortList)[j + 1].NodeID) &&
+                  ((*State->PortList)[i].Link == (*State->PortList)[j + 1].HostLink)) {
+                if ((*State->PortList)[j + 1].ClumpingSupport != HT_CLUMPING_PASSIVE) {
+                  (*State->PortList)[j + 1].ClumpingSupport = (*State->PortList)[i].ClumpingSupport;
+                  // The downstream isn't really passive, just mark it so in order to write the device only once.
+                  (*State->PortList)[j].ClumpingSupport = HT_CLUMPING_PASSIVE;
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure.
+ *
+ * @HtFeatMethod{::F_SET_LINK_DATA}
+ *
+ * @param[in]     State   our global state, port list
+ */
+VOID
+SetLinkData (
+  IN       STATE_DATA *State
+  )
+{
+  UINT8 i;
+  PCI_ADDR LinkBase;
+  PCI_ADDR Reg;
+  UINT32 Temp;
+  UINT32 Widthin;
+  UINT32 Widthout;
+  UINT32 Bits;
+  PCI_ADDR CurrentPtr;
+  HTIDS_PORT_OVERRIDE_LIST PortOverrides;
+
+  PortOverrides = NULL;
+
+  for (i = 0; i < (State->TotalLinks * 2); i++) {
+
+    ASSERT ((*State->PortList)[i & 0xFE].SelWidthOut == (*State->PortList)[ (i & 0xFE) + 1].SelWidthIn);
+    ASSERT ((*State->PortList)[i & 0xFE].SelWidthIn == (*State->PortList)[ (i & 0xFE) + 1].SelWidthOut);
+    ASSERT ((*State->PortList)[i & 0xFE].SelFrequency == (*State->PortList)[ (i & 0xFE) + 1].SelFrequency);
+
+    if ((*State->PortList)[i].SelRegang) {
+      ASSERT ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU);
+      ASSERT ((*State->PortList)[i].Link < 4);
+      State->Nb->SetLinkRegang (
+        (*State->PortList)[i].NodeID,
+        (*State->PortList)[i].Link,
+        State->Nb
+        );
+    }
+
+    //
+    // IDS port override for CPUs and IO Devices
+    //
+    pf_HtIdsGetPortOverride ((BOOLEAN) ((i & 1) == 0), &(*State->PortList)[i], &(*State->PortList)[i + 1], &PortOverrides, State);
+
+    LinkBase = (*State->PortList)[i].Pointer;
+    if (((*State->PortList)[i].Type == PORTLIST_TYPE_IO) && ((*State->PortList)[i].Link == 1)) {
+      LinkBase.Address.Register += HTSLAVE_LINK01_OFFSET;
+    }
+
+    // HT CRC Feature, set if configured.  The default is not to set it, because with some chipsets it
+    // will lock up if done here.
+    if (State->IsSetHtCrcFlood) {
+      Temp = 1;
+      Reg = LinkBase;
+      Reg.Address.Register += HTHOST_LINK_CONTROL_REG;
+      State->HtFeatures->SetHtControlRegisterBits (Reg, 1, 1, &Temp, State);
+      if ((*State->PortList)[i].Type == PORTLIST_TYPE_IO) {
+        // IO Devices also need to have SERR enabled.
+        Reg = LinkBase;
+        Reg.Address.Register = PCI_CONFIG_COMMAND_REG04;
+        LibAmdPciWriteBits (Reg, 8, 8, &Temp, State->ConfigHandle);
+      }
+    }
+
+    // Some IO devices don't work properly when setting widths, so write them in a single operation,
+    // rather than individually.
+    //
+    Widthout = ConvertWidthToBits ((*State->PortList)[i].SelWidthOut);
+    ASSERT (Widthout == 1 || Widthout == 0 || Widthout == 5 || Widthout == 4);
+    Widthin = ConvertWidthToBits ((*State->PortList)[i].SelWidthIn);
+    ASSERT (Widthin == 1 || Widthin == 0 || Widthin == 5 || Widthin == 4);
+
+    Temp = (Widthin & 7) | ((Widthout & 7) << 4);
+    Reg = LinkBase;
+    Reg.Address.Register += HTHOST_LINK_CONTROL_REG;
+    State->HtFeatures->SetHtControlRegisterBits (Reg, 31, 24, &Temp, State);
+
+    Temp = (*State->PortList)[i].SelFrequency;
+    IDS_HDT_CONSOLE (HT_TRACE, "Link Frequency: Node %02d: Link %02d: is running at %2d00MHz\n",
+        (*State->PortList)[i].NodeID, (*State->PortList)[i].Link,
+        (Temp < HT_FREQUENCY_800M) ? Temp + 2 : ((Temp < HT_FREQUENCY_2800M) ? 2 * (Temp - 1) : 2 * (Temp - 3)));
+
+    if ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) {
+      State->Nb->SetLinkFrequency (
+        (*State->PortList)[i].NodeID,
+        (*State->PortList)[i].Link,
+        (UINT8)Temp,
+        State->Nb
+        );
+    } else {
+      ASSERT (Temp <= HT_FREQUENCY_2600M);
+      // Write the frequency setting
+      Reg = LinkBase;
+      Reg.Address.Register += HTSLAVE_FREQ_REV_0_REG;
+      SetHtIoFrequencyRegisterBits (Reg, 11, 8, &Temp, State);
+
+      // Handle additional HT3 frequency requirements, if needed,
+      // or clear them if switching down to ht1 on a warm reset.
+      // Gen1 = 200Mhz -> 1000MHz, Gen3 = 1200MHz -> 2600MHz
+      //
+      // Even though we assert if debugging, we need to check that the capability was
+      // found always, since this is an unknown hardware device, also we are taking
+      // unqualified frequency from the external interface (could be trying to do ht3
+      // on an ht1 IO device).
+      //
+
+      if (Temp > HT_FREQUENCY_1000M) {
+        // Enabling features if gen 3
+        Bits = 1;
+      } else {
+        // Disabling features if gen 1
+        Bits = 0;
+      }
+
+      // Retry Enable
+      if (DoesDeviceHaveHtSubtypeCap (LinkBase, HT_RETRY_CAPABILITY, &CurrentPtr, State)) {
+        ASSERT ((*State->PortList)[i].Link < 2);
+        CurrentPtr.Address.Register += HTRETRY_CONTROL_REG;
+        LibAmdPciWriteBits (CurrentPtr,
+                            ((*State->PortList)[i].Link * 16),
+                            ((*State->PortList)[i].Link * 16),
+                            &Bits,
+                            State->ConfigHandle);
+      } else {
+        //  If we are turning it off, that may mean the device was only ht1 capable,
+        // so don't complain that we can't do it.
+        //
+        if (Bits != 0) {
+          NotifyWarningOptRequiredCapRetry ((*State->PortList)[i].NodeID,
+                                            (*State->PortList)[i].HostLink,
+                                            (*State->PortList)[i].HostDepth,
+                                            State);
+        }
+      }
+
+      // Scrambling enable
+      if (DoesDeviceHaveHtSubtypeCap (LinkBase, HT_GEN3_CAPABILITY, &CurrentPtr, State)) {
+        ASSERT ((*State->PortList)[i].Link < 2);
+        CurrentPtr.Address.Register = CurrentPtr.Address.Register +
+          HTGEN3_LINK_TRAINING_0_REG +
+          ((*State->PortList)[i].Link * HTGEN3_LINK01_OFFSET);
+        LibAmdPciWriteBits (CurrentPtr, 3, 3, &Bits, State->ConfigHandle);
+      } else {
+        //  If we are turning it off, that may mean the device was only ht1 capable,
+        // so don't complain that we can't do it.
+        //
+        if (Bits != 0) {
+          NotifyWarningOptRequiredCapGen3 ((*State->PortList)[i].NodeID,
+                                           (*State->PortList)[i].HostLink,
+                                           (*State->PortList)[i].HostDepth,
+                                           State);
+        }
+      }
+    }
+    // Enable Unit ID Clumping if supported.
+    if (State->IsUsingUnitIdClumping) {
+      if (((*State->PortList)[i].ClumpingSupport != HT_CLUMPING_PASSIVE) &&
+          ((*State->PortList)[i].ClumpingSupport != HT_CLUMPING_DISABLE)) {
+        Bits = (*State->PortList)[i].ClumpingSupport;
+        if ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) {
+          State->Nb->SetLinkUnitIdClumping (
+            (*State->PortList)[i].NodeID,
+            (*State->PortList)[i].Link,
+            (*State->PortList)[i].ClumpingSupport,
+            State->Nb
+            );
+        } else {
+          if (DoesDeviceHaveHtSubtypeCap (LinkBase, HT_UNITID_CAPABILITY, &Reg, State)) {
+            Reg.Address.Register += HTUNIT_ENABLE_REG;
+            LibAmdPciWriteBits (Reg, 31, 0, &Bits, State->ConfigHandle);
+          } else {
+            // If we found one when gathering support, we have to find one now.
+            ASSERT (FALSE);
+          }
+        }
+      }
+    }
+  }
+}
+
+/*------------------------------------------------------------------------------------------*/
+/**
+ * Find a specific HT capability type.
+ *
+ * Search all the PCI Config space capabilities on any type of device for an
+ * HT capability of the specific subtype.
+ *
+ * @param[in]  DevicePointer     A PCI Config address somewhere in the device config space
+ * @param[in]  CapSubType        The HT capability subtype to find
+ * @param[out] CapabilityBase    The Config space base address of the capability, if found.
+ * @param[in]  State             Our State
+ *
+ * @retval TRUE     the capability was found
+ * @retval FALSE    the capability was not found
+ */
+BOOLEAN
+DoesDeviceHaveHtSubtypeCap (
+  IN       PCI_ADDR         DevicePointer,
+  IN       UINT8            CapSubType,
+     OUT   PCI_ADDR         *CapabilityBase,
+  IN       STATE_DATA       *State
+  )
+{
+  BOOLEAN IsFound;
+  BOOLEAN IsDone;
+  PCI_ADDR Reg;
+  UINT32 Temp;
+  UINT32 RegSubType;
+  UINT32 RegSubTypeMask;
+
+  // Set the PCI Config Space base and the match value.
+  IsFound = FALSE;
+  IsDone = FALSE;
+  Reg = DevicePointer;
+  Reg.Address.Register = 0;
+  if (CapSubType < (HT_HOST_CAPABILITY + 1)) {
+    // HT Interface sub type
+    RegSubType = ((UINT32) (CapSubType << 29) | (UINT32)8);
+    RegSubTypeMask = HT_INTERFACE_CAP_SUBTYPE_MASK;
+  } else {
+    // Other HT capability subtype
+    RegSubType = ((UINT32) (CapSubType << 27) | (UINT32)8);
+    RegSubTypeMask = HT_CAP_SUBTYPE_MASK;
+  }
+  (*CapabilityBase).AddressValue = (UINT32)ILLEGAL_SBDFO;
+
+  // Find it
+  do {
+    LibAmdPciFindNextCap (&Reg, State->ConfigHandle);
+    if (Reg.AddressValue != (UINT32)ILLEGAL_SBDFO) {
+      LibAmdPciRead (AccessWidth32, Reg, &Temp, State->ConfigHandle);
+      // HyperTransport and subtype capability ?
+      if ((Temp & RegSubTypeMask) == RegSubType) {
+        *CapabilityBase = Reg;
+        IsFound = TRUE;
+      }
+      // Some other capability, keep looking
+    } else {
+      //  Not there
+      IsDone = TRUE;
+    }
+  } while (!IsFound && !IsDone);
+
+  return IsFound;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Retry must be enabled on all coherent links if it is enabled on any coherent links.
+ *
+ * @HtFeatMethod{::F_SET_LINK_DATA}
+ *
+ * Effectively, this means HT3 on some links cannot be mixed with HT1 on others.
+ * Scan the CPU to CPU links for this condition and limit those frequencies to HT1
+ * if it is detected.
+ * (Non-coherent links are independent.)
+ *
+ * @param[in,out]   State       global state, port frequency settings.
+ *
+ * @retval          TRUE        Fixup occurred, all coherent links HT1
+ * @retval          FALSE       No changes
+ */
+BOOLEAN
+IsCoherentRetryFixup (
+  IN       STATE_DATA       *State
+  )
+{
+  UINT8 Freq;
+  UINT8 i;
+  UINT8 DetectedFrequencyState;
+  BOOLEAN IsMixed;
+  UINT32 Temp;
+
+  //
+  // detectedFrequencyState:
+  //   0 - initial state
+  //   1 - HT1 Frequencies detected
+  //   2 - HT3 Frequencies detected
+  //
+  IsMixed = FALSE;
+  DetectedFrequencyState = 0;
+
+  // Scan coherent links for a mix of HT3 / HT1
+  for (i = 0; i < (State->TotalLinks * 2); i += 2) {
+    if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) && ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_CPU)) {
+      // At this point, Frequency of port [i+1] must equal [i], so just check one of them.
+      switch (DetectedFrequencyState) {
+      case 0:
+        // Set current state to indicate what link frequency we found first
+        if ((*State->PortList)[i].SelFrequency > HT_FREQUENCY_1000M) {
+          // HT3 frequencies
+          DetectedFrequencyState = 2;
+        } else {
+          // HT1 frequencies
+          DetectedFrequencyState = 1;
+        }
+        break;
+      case 1:
+        // If HT1 frequency detected, fail any HT3 frequency
+        if ((*State->PortList)[i].SelFrequency > HT_FREQUENCY_1000M) {
+          IsMixed = TRUE;
+        }
+        break;
+      case 2:
+        // If HT3 frequency detected, fail any HT1 frequency
+        if ((*State->PortList)[i].SelFrequency <= HT_FREQUENCY_1000M) {
+          IsMixed = TRUE;
+        }
+        break;
+      default:
+        ASSERT (FALSE);
+      }
+      if (IsMixed) {
+        // Don't need to keep checking after we find a mix.
+        break;
+      }
+    }
+  }
+
+  if (IsMixed) {
+    for (i = 0; i < (State->TotalLinks * 2); i += 2) {
+      if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) && ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_CPU)) {
+        // Limit coherent links to HT 1 frequencies.
+        Temp = (*State->PortList)[i].CompositeFrequencyCap & (*State->PortList)[i + 1].CompositeFrequencyCap;
+        Temp &= HT_FREQUENCY_LIMIT_HT1_ONLY;
+        ASSERT (Temp != 0);
+        (*State->PortList)[i].CompositeFrequencyCap = Temp;
+        (*State->PortList)[i + 1].CompositeFrequencyCap = Temp;
+        Freq = LibAmdBitScanReverse (Temp);
+        (*State->PortList)[i].SelFrequency = Freq;
+        (*State->PortList)[i + 1].SelFrequency = Freq;
+      }
+    }
+  }
+  return (IsMixed);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatOptimization.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatOptimization.h
new file mode 100644
index 0000000000..e4cf5099a2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatOptimization.h
@@ -0,0 +1,140 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Link Optimization Feature.
+ *
+ * Contains interface for Link Optimization.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _HT_FEAT_OPTIMIZATION_H_
+#define _HT_FEAT_OPTIMIZATION_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Translate a desired width setting to the bits to set in the register field.
+ */
+UINT8
+ConvertWidthToBits (
+  IN       UINT8       Value
+  );
+
+/**
+ * Access HT Link Control Register.
+ *
+ */
+VOID
+SetHtControlRegisterBits (
+  IN       PCI_ADDR    Reg,
+  IN       UINT8       HiBit,
+  IN       UINT8       LoBit,
+  IN       UINT32      *Value,
+  IN       STATE_DATA  *State
+  );
+
+/**
+ * Get Link features into system data structure.
+ *
+ */
+VOID
+GatherLinkData (
+  IN       STATE_DATA   *State
+  );
+
+/**
+ * Optimize Links.
+ *
+ */
+VOID
+SelectOptimalWidthAndFrequency (
+  IN OUT   STATE_DATA   *State
+  );
+
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure.
+ *
+ */
+VOID
+SetLinkData (
+  IN       STATE_DATA   *State
+  );
+
+/**
+ * Retry must be enabled on all coherent links if it is enabled on any coherent links.
+ *
+ */
+BOOLEAN
+IsCoherentRetryFixup (
+  IN       STATE_DATA       *State
+  );
+
+/**
+ * Find a specific HT capability type.
+ *
+ * @retval FALSE    the capability was not found
+ */
+BOOLEAN
+DoesDeviceHaveHtSubtypeCap (
+  IN       PCI_ADDR         DevicePointer,
+  IN       UINT8            CapSubType,
+     OUT   PCI_ADDR         *CapabilityBase,
+  IN       STATE_DATA       *State
+  );
+
+#endif  /* _HT_FEAT_OPTIMIZATION_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatRouting.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatRouting.c
new file mode 100644
index 0000000000..5d34153fc5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatRouting.c
@@ -0,0 +1,493 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Routing Routines
+ *
+ * Contains routines for isomorphic topology matching,
+ * routing determination, and routing initialization.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNotify.h"
+#include "htNb.h"
+#include "htGraph.h"
+#include "htFeatRouting.h"
+#include "htTopologies.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FEATURES_HTFEATROUTING_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+typedef struct {
+  UINT8   **CurrentPosition;
+  BOOLEAN IsCustomList;
+} TOPOLOGY_CONTEXT;
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***          ISOMORPHISM BASED ROUTING TABLE GENERATION CODE            ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return the Link on source Node which connects to target Node
+ *
+ * @param[in] SourceNode   The Node on which to find the Link
+ * @param[in] TargetNode   The Link will connect to this Node
+ * @param[in] State        Our global state
+ *
+ * @return    the Link to target
+ */
+UINT8
+STATIC
+FindLinkToNode (
+  IN       UINT8        SourceNode,
+  IN       UINT8        TargetNode,
+  IN       STATE_DATA   *State
+  )
+{
+  UINT8 TargetLink;
+  UINT8 k;
+
+  // A node linked to itself is not a supported topology graph, this is probably an error in the
+  // topology data.  There is not going to be a portlist match for it.
+  ASSERT (SourceNode != TargetNode);
+  TargetLink = INVALID_LINK;
+  for (k = 0; k < State->TotalLinks*2; k += 2) {
+    if (((*State->PortList)[k].NodeID == SourceNode) && ((*State->PortList)[k + 1].NodeID == TargetNode)) {
+      TargetLink = (*State->PortList)[k].Link;
+      break;
+    } else if (((*State->PortList)[k + 1].NodeID == SourceNode) && ((*State->PortList)[k].NodeID == TargetNode)) {
+      TargetLink = (*State->PortList)[k + 1].Link;
+      break;
+    }
+  }
+  ASSERT (TargetLink != INVALID_LINK);
+
+  return TargetLink;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *      Is graphA isomorphic to graphB?
+ *
+ *  If this function returns true, then Perm will contain the permutation
+ *  required to transform graphB into graphA.
+ *  We also use the degree of each Node, that is the number of connections it has, to
+ *  speed up rejection of non-isomorphic graphs (if there is a Node in graphA with n
+ *  connections, there must be at least one unmatched in graphB with n connections).
+ *
+ * @param[in]     Node     the discovered Node which we are trying to match
+ *                      with a permutation the topology
+ * @param[in,out] State our global state, degree and adjacency matrix,
+ *                      output a permutation if successful
+ * @retval TRUE         the graphs are isomorphic
+ * @retval FALSE        the graphs are not isomorphic
+ *
+ */
+BOOLEAN
+STATIC
+IsIsomorphic (
+  IN       UINT8         Node,
+  IN OUT   STATE_DATA    *State
+  )
+{
+  UINT8 j;
+  UINT8 k;
+  UINT8 Nodecnt;
+
+  // We have only been called if Nodecnt == pSelected->size !
+  Nodecnt = State->NodesDiscovered + 1;
+
+  if (Node != Nodecnt) {
+    // Keep building the permutation
+    for (j = 0; j < Nodecnt; j++) {
+      // Make sure the degree matches
+      if (State->Fabric->SysDegree[Node] != State->Fabric->DbDegree[j]) {
+        continue;
+      }
+
+      // Make sure that j hasn't been used yet (ought to use a "used"
+      // array instead, might be faster)
+      for (k = 0; k < Node; k++) {
+        if (State->Fabric->Perm[k] == j) {
+          break;
+        }
+      }
+      if (k != Node) {
+        continue;
+      }
+      State->Fabric->Perm[Node] = j;
+      if (IsIsomorphic (Node + 1, State)) {
+        return TRUE;
+      }
+    }
+    return FALSE;
+  } else {
+    // Test to see if the permutation is isomorphic
+    for (j = 0; j < Nodecnt; j++) {
+      for (k = 0; k < Nodecnt; k++) {
+        if (State->Fabric->SysMatrix[j][k] != State->Fabric->DbMatrix[State->Fabric->Perm[j]][State->Fabric->Perm[k]] ) {
+          return FALSE;
+        }
+      }
+    }
+    return TRUE;
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set Topology List iterator context to the Beginning and provide the first topology.
+ *
+ * Check the interface for a custom topology list.  If one is found, set context to the
+ * first item, and return that item. Otherwise return the first item in the built in list.
+ *
+ * @param[in,out] TopologyContextHandle  Initialize this context to beginning of lists.
+ * @param[out]     NextTopology           The next topology, NULL if end.
+ * @param[in]      State                  Access to interface, handles.
+ *
+ */
+VOID
+STATIC
+BeginTopologies (
+     OUT   TOPOLOGY_CONTEXT  *TopologyContextHandle,
+     OUT   UINT8             **NextTopology,
+  IN       STATE_DATA        *State
+  )
+{
+  if (State->HtBlock->Topolist != NULL) {
+    // Start with a custom list
+    TopologyContextHandle->CurrentPosition = State->HtBlock->Topolist;
+    TopologyContextHandle->IsCustomList = TRUE;
+  } else {
+    // Start with the built in list
+    GetAmdTopolist (&TopologyContextHandle->CurrentPosition);
+    TopologyContextHandle->IsCustomList = FALSE;
+  }
+  *NextTopology = *TopologyContextHandle->CurrentPosition;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Iterate through available topologies.
+ *
+ * Increment to the next list item.  If we are doing a custom list, when we reach the end
+ * switch to the built in list.
+ *
+ * @param[in,out]  TopologyContextHandle  Maintain iterator's context from one call to the next
+ * @param[out]     NextTopology           The next topology, NULL if end.
+ *
+ */
+VOID
+STATIC
+GetNextTopology (
+  IN OUT   TOPOLOGY_CONTEXT  *TopologyContextHandle,
+     OUT   UINT8             **NextTopology
+  )
+{
+  // Not valid to continue calling this routine after reaching the end.
+  ASSERT (TopologyContextHandle->CurrentPosition != NULL);
+
+  if (TopologyContextHandle->IsCustomList) {
+    // We are iterating the custom list from the interface.
+    TopologyContextHandle->CurrentPosition++;
+    if (*TopologyContextHandle->CurrentPosition == NULL) {
+      // We are at the end of the custom list, switch to the built in list.
+      TopologyContextHandle->IsCustomList = FALSE;
+      GetAmdTopolist (&TopologyContextHandle->CurrentPosition);
+    }
+  } else {
+    // We are iterating the built in list
+    TopologyContextHandle->CurrentPosition++;
+    // If we are at the end of the built in list, NextTopology == NULL is the AtEnd.
+  }
+  *NextTopology = *TopologyContextHandle->CurrentPosition;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Using the description of the fabric topology we discovered, try to find a match
+ * among the supported topologies.
+ *
+ * @HtFeatMethod{::F_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES}
+ *
+ * A supported topology description matches the discovered fabric if the Nodes can be
+ * matched in such a way that all the Nodes connected in one set are exactly the
+ * Nodes connected in the other (formally, that the graphs are isomorphic).  Which
+ * Links are used is not really important to matching.  If the graphs match, then
+ * there is a permutation of one that translates the Node positions and Linkages to
+ * the other.
+ *
+ * In order to make the isomorphism test efficient, we test for matched number of Nodes
+ * (a 4 Node fabric is not isomorphic to a 2 Node topology), and provide degrees of Nodes
+ * to the isomorphism test.
+ *
+ * The generic routing table solution for any topology is predetermined and represented
+ * as part of the topology.  The permutation we computed tells us how to interpret the
+ * routing onto the fabric we discovered.  We do this working backward from the last
+ * Node discovered to the BSP, writing the routing tables as we go.
+ *
+ * @param[in,out]    State    the discovered fabric, degree matrix, permutation
+ *
+ */
+VOID
+LookupComputeAndLoadRoutingTables (
+  IN OUT   STATE_DATA    *State
+  )
+{
+  TOPOLOGY_CONTEXT   TopologyContextHandle;
+  UINT8 *Selected;
+  UINT8 Size;
+  UINT8 PairCounter;
+  UINT8 ReqTargetLink;
+  UINT8 RspTargetLink;
+  UINT8 ReqTargetNode;
+  UINT8 RspTargetNode;
+  UINT8 AbstractBcTargetNodes;
+  UINT32 BcTargetLinks;
+  UINT8 NodeCounter;
+  UINT8 NodeBeingRouted;
+  UINT8 NodeRoutedTo;
+  UINT8 BroadcastSourceNode;
+
+  Size = State->NodesDiscovered + 1;
+  BeginTopologies (&TopologyContextHandle, &Selected, State);
+  while (Selected != NULL) {
+    if (GraphHowManyNodes (Selected) == Size) {
+      // Build Degree vector and Adjacency Matrix for this entry
+      for (NodeCounter = 0; NodeCounter < Size; NodeCounter++) {
+        State->Fabric->DbDegree[NodeCounter] = 0;
+        for (PairCounter = 0; PairCounter < Size; PairCounter++) {
+          if (GraphIsAdjacent (Selected, NodeCounter, PairCounter)) {
+            State->Fabric->DbMatrix[NodeCounter][PairCounter] = TRUE;
+            State->Fabric->DbDegree[NodeCounter]++;
+          } else {
+            State->Fabric->DbMatrix[NodeCounter][PairCounter] = FALSE;
+          }
+        }
+      }
+
+      if (IsIsomorphic (0, State)) {
+        break;  // A matching topology was found
+      }
+    }
+    GetNextTopology (&TopologyContextHandle, &Selected);
+  }
+
+  if (Selected != NULL) {
+    // Compute the reverse Permutation
+    for (NodeCounter = 0; NodeCounter < Size; NodeCounter++) {
+      State->Fabric->ReversePerm[State->Fabric->Perm[NodeCounter]] = NodeCounter;
+    }
+
+    // Start with the last discovered Node, and move towards the BSP
+    for (NodeCounter = 0; NodeCounter < Size; NodeCounter++) {
+      NodeBeingRouted = ((Size - 1) - NodeCounter);
+      for (NodeRoutedTo = 0; NodeRoutedTo < Size; NodeRoutedTo++) {
+        BcTargetLinks = 0;
+        AbstractBcTargetNodes = GraphGetBc (Selected, State->Fabric->Perm[NodeBeingRouted], State->Fabric->Perm[NodeRoutedTo]);
+
+        for (BroadcastSourceNode = 0; BroadcastSourceNode < MAX_NODES; BroadcastSourceNode++) {
+          if ((AbstractBcTargetNodes & ((UINT32)1 << BroadcastSourceNode)) != 0) {
+            // Accepting broadcast from yourself is handled in Nb, so in the topology graph it is an error.
+            ASSERT (NodeBeingRouted != State->Fabric->ReversePerm[BroadcastSourceNode]);
+            BcTargetLinks |= (UINT32)1 << FindLinkToNode (NodeBeingRouted, State->Fabric->ReversePerm[BroadcastSourceNode], State);
+          }
+        }
+
+        if (NodeBeingRouted == NodeRoutedTo) {
+          ReqTargetLink = ROUTE_TO_SELF;
+          RspTargetLink = ROUTE_TO_SELF;
+        } else {
+          ReqTargetNode = GraphGetReq (Selected, State->Fabric->Perm[NodeBeingRouted], State->Fabric->Perm[NodeRoutedTo]);
+          ReqTargetLink = FindLinkToNode (NodeBeingRouted, State->Fabric->ReversePerm[ReqTargetNode], State);
+
+          RspTargetNode = GraphGetRsp (Selected, State->Fabric->Perm[NodeBeingRouted], State->Fabric->Perm[NodeRoutedTo]);
+          RspTargetLink = FindLinkToNode (NodeBeingRouted, State->Fabric->ReversePerm[RspTargetNode], State);
+        }
+        State->Nb->WriteFullRoutingTable (NodeBeingRouted, NodeRoutedTo, ReqTargetLink, RspTargetLink, BcTargetLinks, State->Nb);
+      }
+      //  Clean up discovery 'footprint' that otherwise remains in the routing table.  It didn't hurt
+      // anything, but might cause confusion during debug and validation.  Do this by setting the
+      // route back to all self routes. Since it's the Node that would be one more than actually installed,
+      // this only applies if less than MaxNodes were found.
+      //
+      if (Size < MAX_NODES) {
+        State->Nb->WriteFullRoutingTable (NodeBeingRouted, Size, ROUTE_TO_SELF, ROUTE_TO_SELF, 0, State->Nb);
+      }
+    }
+  } else {
+    //
+    // No Matching Topology was found
+    // Error Strategy:
+    // Auto recovery doesn't seem likely, Force boot as 1P.
+    // For reporting, logging, provide number of Nodes
+    // If not implemented or returns, boot as BSP uniprocessor.
+    //
+    // This can be caused by not supplying an additional topology list, if your board is not one of the built-in topologies.
+    //
+    NotifyErrorCohNoTopology (State->NodesDiscovered, State);
+    IDS_ERROR_TRAP;
+    // Force 1P
+    State->NodesDiscovered = 0;
+    State->TotalLinks = 0;
+    State->Nb->EnableRoutingTables (0, State->Nb);
+    State->HtInterface->CleanMapsAfterError (State);
+  }
+  // Save the topology pointer, or NULL, for other features
+  State->Fabric->MatchedTopology = Selected;
+  IDS_HDT_CONSOLE (
+    HT_TRACE,
+    "System routed as %s.\n",
+    ((TopologyContextHandle.IsCustomList) ?
+     "custom topology" :
+     (((Selected == amdHtTopologySingleNode) || (Selected == NULL)) ?
+      "single node" :
+      ((Selected == amdHtTopologyDualNode) ?
+       "dual node" :
+       ((Selected == amdHtTopologyFourSquare) ?
+        "four node box" :
+        ((Selected == amdHtTopologyFourKite) ?
+         "four node kite" :
+         ((Selected == amdHtTopologyFourFully) ?
+          "fully connected four-way" :
+          ((Selected == amdHtTopologyEightDoubloon) ?
+           "MCM max performance" :
+           ((Selected == amdHtTopologyEightTwinFullyFourWays) ?
+            "MCM max I/O" :
+            "AMD builtin topology"))))))))
+    );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Make a Hop Count Table for the installed topology.
+ *
+ * @HtFeatMethod{::F_MAKE_HOP_COUNT_TABLE}
+ *
+ * For SLIT, create a node x node matrix with the number of hops.  We can do this
+ * using the topology and the permutation, counting the nodes visited in the routes between
+ * nodes.
+ *
+ * @param[in,out]   State    access topology, permutation, update hop table
+ *
+ */
+VOID
+MakeHopCountTable (
+  IN OUT   STATE_DATA    *State
+  )
+{
+  UINT8 Origin;
+  UINT8 Target;
+  UINT8 Current;
+  UINT8 Hops;
+  UINT8 Size;
+
+  ASSERT (State->Fabric != NULL);
+  if (State->HopCountTable != NULL) {
+    if (State->Fabric->MatchedTopology != NULL) {
+      Size = GraphHowManyNodes (State->Fabric->MatchedTopology);
+      State->HopCountTable->Size = Size;
+      //
+      // For each node, targeting each node, follow the request path through the database graph,
+      // counting the number of edges.
+      //
+      for (Origin = 0; Origin < Size; Origin++) {
+        for (Target = 0; Target < Size; Target++) {
+          // If both nodes are the same the answer will be zero
+          Hops = 0;
+          // Current starts as the database node corresponding to system node Origin.
+          Current = State->Fabric->Perm[Origin];
+          // Stop if Current is the database node corresponding to system node Target
+          while (Current != State->Fabric->Perm[Target]) {
+            // This is a hop, so count it. Move Current to the next intermediate database node.
+            Hops++;
+            Current = GraphGetReq (State->Fabric->MatchedTopology, Current, State->Fabric->Perm[Target]);
+          }
+          // Put the hop count in the table.
+          State->HopCountTable->Hops[ ((Origin * Size) + Target)] = Hops;
+        }
+      }
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatRouting.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatRouting.h
new file mode 100644
index 0000000000..f672cc4c83
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatRouting.h
@@ -0,0 +1,90 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Routing Feature Interface.
+ *
+ * Interfaces to routing and isomorphism routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _HT_FEAT_ROUTING_H_
+#define _HT_FEAT_ROUTING_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Using the description of the fabric topology we discovered, try to find a match
+ * among the supported topologies.
+ *
+ */
+VOID
+LookupComputeAndLoadRoutingTables (
+  IN OUT   STATE_DATA    *State
+  );
+
+/**
+ * Make a Hop Count Table for the installed topology.
+ *
+ */
+VOID
+MakeHopCountTable (
+  IN OUT   STATE_DATA    *State
+  );
+
+#endif  /* _HT_FEAT_ROUTING_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatSets.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatSets.c
new file mode 100644
index 0000000000..112dc486a3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatSets.c
@@ -0,0 +1,135 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HyperTransport feature sets initializers.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionsHt.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "CommonReturns.h"
+#include "htFeatDynamicDiscovery.h"
+#include "htFeatRouting.h"
+#include "htFeatNoncoherent.h"
+#include "htFeatOptimization.h"
+#include "htFeatGanging.h"
+#include "htFeatSublinks.h"
+#include "htFeatTrafficDistribution.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FEATURES_HTFEATSETS_FILECODE
+extern CONST OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+/**
+ * Initializer for the default feature set implementation,
+ * full features.
+ */
+CONST HT_FEATURES ROMDATA HtFeaturesDefault =
+{
+  CoherentDiscovery,
+  LookupComputeAndLoadRoutingTables,
+  MakeHopCountTable,
+  ProcessLink,
+  GatherLinkData,
+  SelectOptimalWidthAndFrequency,
+  RegangLinks,
+  SubLinkRatioFixup,
+  IsCoherentRetryFixup,
+  SetLinkData,
+  TrafficDistribution,
+  SetHtControlRegisterBits,
+  ConvertWidthToBits
+};
+
+/**
+* Initializer for the coherent HT feature set implementation
+* (IO is using PCIe).
+*/
+CONST HT_FEATURES ROMDATA HtFeaturesCoherentOnly =
+{
+  CoherentDiscovery,
+  LookupComputeAndLoadRoutingTables,
+  MakeHopCountTable,
+  (PF_PROCESS_LINK)CommonVoid,
+  GatherLinkData,
+  SelectOptimalWidthAndFrequency,
+  RegangLinks,
+  SubLinkRatioFixup,
+  IsCoherentRetryFixup,
+  SetLinkData,
+  TrafficDistribution,
+  SetHtControlRegisterBits,
+  ConvertWidthToBits
+};
+
+/**
+ * Initializer for the non-coherent only build option.
+ */
+CONST HT_FEATURES ROMDATA HtFeaturesNonCoherentOnly =
+{
+  (PF_COHERENT_DISCOVERY)CommonVoid,
+  (PF_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES)CommonVoid,
+  (PF_MAKE_HOP_COUNT_TABLE)CommonVoid,
+  ProcessLink,
+  GatherLinkData,
+  SelectOptimalWidthAndFrequency,
+  (PF_REGANG_LINKS)CommonVoid,
+  (PF_SUBLINK_RATIO_FIXUP)CommonVoid,
+  (PF_IS_COHERENT_RETRY_FIXUP)CommonReturnFalse,
+  SetLinkData,
+  (PF_TRAFFIC_DISTRIBUTION)CommonVoid,
+  SetHtControlRegisterBits,
+  ConvertWidthToBits
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatSublinks.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatSublinks.c
new file mode 100644
index 0000000000..194861a055
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatSublinks.c
@@ -0,0 +1,232 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * SubLink management Routines.
+ *
+ * Contains routines for subLink frequency ratios.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "IdsHt.h"
+#include "htFeatSublinks.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FEATURES_HTFEATSUBLINKS_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+typedef struct {
+  UINT8 HiFreq;
+  UINT8 LoFreq;
+} VALID_RATIO_ITEM;
+
+STATIC CONST VALID_RATIO_ITEM ROMDATA ValidRatioList[] =
+{
+  {HT_FREQUENCY_3200M, HT_FREQUENCY_1600M},   // 3200MHz / 1600MHz 2:1
+  {HT_FREQUENCY_3200M, HT_FREQUENCY_800M},    // 3200MHz / 800MHz  4:1
+  {HT_FREQUENCY_3200M, HT_FREQUENCY_400M},    // 3200MHz / 400MHz  8:1
+  {HT_FREQUENCY_2800M, HT_FREQUENCY_1400M},   // 2800MHz / 1400MHz 2:1
+  {HT_FREQUENCY_2400M, HT_FREQUENCY_1200M},   // 2400MHz / 1200MHz 2:1
+  {HT_FREQUENCY_2400M, HT_FREQUENCY_600M},    // 2400MHz /  600MHz 4:1
+  {HT_FREQUENCY_2400M, HT_FREQUENCY_400M},    // 2400MHz /  400MHz 6:1
+  {HT_FREQUENCY_2000M, HT_FREQUENCY_1000M},   // 2000MHz / 1000MHz 2:1
+  {HT_FREQUENCY_1600M, HT_FREQUENCY_800M},    // 1600MHz /  800MHz 2:1
+  {HT_FREQUENCY_1600M, HT_FREQUENCY_400M},    // 1600MHz /  400MHz 4:1
+  {HT_FREQUENCY_1600M, HT_FREQUENCY_200M},    // 1600MHz /  200Mhz 8:1
+  {HT_FREQUENCY_1200M, HT_FREQUENCY_600M},    // 1200MHz /  600MHz 2:1
+  {HT_FREQUENCY_1200M, HT_FREQUENCY_200M},    // 1200MHz /  200MHz 6:1
+  {HT_FREQUENCY_800M,  HT_FREQUENCY_400M},    // 800MHz /  400MHz 2:1
+  {HT_FREQUENCY_800M,  HT_FREQUENCY_200M},    // 800MHz /  200MHz 4:1
+  {HT_FREQUENCY_400M,  HT_FREQUENCY_200M}     // 400MHz /  200MHz 2:1
+};
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***                            Link Optimization                        ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Iterate through all Links, checking the frequency of each subLink pair.
+ *
+ * @HtFeatMethod{::F_SUBLINK_RATIO_FIXUP}
+ *
+ * Make the adjustment to the port list data so that the frequencies
+ * are at a valid ratio, reducing frequency as needed to achieve
+ * this. (All Links support the minimum 200 MHz frequency.)  Repeat
+ * the above until no adjustments are needed.
+ * @note no hardware state changes in this routine.
+ *
+ * @param[in,out]     State     Link state and port list
+ *
+ */
+VOID
+SubLinkRatioFixup (
+  IN OUT   STATE_DATA    *State
+  )
+{
+  UINT8 i;
+  UINT8 j;
+  UINT8 ValidRatioItem;
+  BOOLEAN Changes;
+  BOOLEAN Downgrade;
+  UINT8 HiIndex;
+  UINT8 HiFreq;
+  UINT8 LoFreq;
+
+  UINT32 Temp;
+
+  do {
+    Changes = FALSE;
+    for (i = 0; i < State->TotalLinks*2; i++) {
+      // Must be a CPU Link
+      if ((*State->PortList)[i].Type != PORTLIST_TYPE_CPU) {
+        continue;
+      }
+      // Only look for subLink1's
+      if ((*State->PortList)[i].Link < 4) {
+        continue;
+      }
+
+      for (j = 0; j < State->TotalLinks*2; j++) {
+        // Step 1. Find the matching subLink0
+        if ((*State->PortList)[j].Type != PORTLIST_TYPE_CPU) {
+          continue;
+        }
+        if ((*State->PortList)[j].NodeID != (*State->PortList)[i].NodeID) {
+          continue;
+        }
+        if ((*State->PortList)[j].Link != ((*State->PortList)[i].Link & 0x03)) {
+          continue;
+        }
+
+        // Step 2. Check for an illegal frequency ratio
+        if ((*State->PortList)[i].SelFrequency >= (*State->PortList)[j].SelFrequency) {
+          HiIndex = i;
+          HiFreq = (*State->PortList)[i].SelFrequency;
+          LoFreq = (*State->PortList)[j].SelFrequency;
+        } else {
+          HiIndex = j;
+          HiFreq = (*State->PortList)[j].SelFrequency;
+          LoFreq = (*State->PortList)[i].SelFrequency;
+        }
+
+        // The frequencies are 1:1, no need to do anything
+        if (HiFreq == LoFreq) {
+          break;
+        }
+
+        Downgrade = TRUE;
+
+        for (ValidRatioItem = 0; ValidRatioItem < (sizeof (ValidRatioList) / sizeof (VALID_RATIO_ITEM)); ValidRatioItem++) {
+          if ((HiFreq == ValidRatioList[ValidRatioItem].HiFreq) &&
+              (LoFreq == ValidRatioList[ValidRatioItem].LoFreq)) {
+            Downgrade = FALSE;
+            break;
+          }
+        }
+
+        // Step 3. Downgrade the higher of the two frequencies, and set Changes to FALSE
+        if (Downgrade) {
+          // Although the problem was with the port specified by hiIndex, we need to
+          // Downgrade both ends of the Link.
+          HiIndex = HiIndex & 0xFE; // Select the 'upstream' (i.e. even) port
+
+          Temp = (*State->PortList)[HiIndex].CompositeFrequencyCap;
+
+          // Remove HiFreq from the list of valid frequencies
+          Temp = Temp & ~((UINT32)1 << HiFreq);
+          ASSERT (Temp != 0);
+          (*State->PortList)[HiIndex].CompositeFrequencyCap = (UINT32)Temp;
+          (*State->PortList)[HiIndex + 1].CompositeFrequencyCap = (UINT32)Temp;
+
+          HiFreq = LibAmdBitScanReverse (Temp);
+
+          (*State->PortList)[HiIndex].SelFrequency = HiFreq;
+          (*State->PortList)[HiIndex + 1].SelFrequency = HiFreq;
+
+          Changes = TRUE;
+        }
+      }
+    }
+  } while (Changes); // Repeat until a valid configuration is reached
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatSublinks.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatSublinks.h
new file mode 100644
index 0000000000..d8c1d9d00b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatSublinks.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * SubLink Interface.
+ *
+ * Contains interface to subLink management feature, for unganged subLinks.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _HT_FEAT_SUBLINKS_H_
+#define _HT_FEAT_SUBLINKS_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Iterate through all Links, checking the frequency of each subLink pair.
+ *
+ */
+VOID
+SubLinkRatioFixup (
+  IN OUT   STATE_DATA    *State
+  );
+
+#endif  /* _HT_FEAT_SUBLINKS_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatTrafficDistribution.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatTrafficDistribution.c
new file mode 100644
index 0000000000..5e9fe0e7ba
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatTrafficDistribution.c
@@ -0,0 +1,420 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Traffic Distribution Routines.
+ *
+ * Contains routines for traffic distribution
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNb.h"
+#include "htNotify.h"
+#include "htFeatTrafficDistribution.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_FEATURES_HTFEATTRAFFICDISTRIBUTION_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+/// Enum for the possible link connection status
+typedef enum {
+  Unconnected = 0,                               ///< Nodes have not connected link.
+  UngangedLink,                                  ///< Nodes are connected with one unganged link.
+  Redundant,                                     ///< Nodes are connected with multi-unganged link.
+  GangedLink,                                    ///< Nodes are connected with one or mutiple ganged link.
+  MaxLink                                        ///< Max links status.
+} LINK_STATUS;
+
+/// Local port connection state data structure
+typedef struct {
+  LINK_STATUS ConnectionState;                   /**< The link connection state. */
+  UINT8 BigLinkPort;                             /**< The Port number for ganged Link */
+} PORT_CONNECTION_STATE;
+
+/// Local ganged link for Victim Distribution data structure
+typedef struct {
+UINT8 NodeA;                                     ///< Source Node from Node A To Node B and DstNode from Node A To Node B.
+UINT8 NodeB;                                     ///< Source Node from Node B To Node A and DstNode from Node A To Node B.
+UINT8 VictimedLinkFromNodeAToNodeB;              ///< Victimed Link from Node A To Node B.
+UINT8 VictimedLinkFromNodeBToNodeA;              ///< Victimed Link from Node B To Node A.
+} VICTIM_ROUTED_LINK;
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Identify Links which can have traffic distribution.
+ *
+ * @HtFeatMethod{::F_TRAFFIC_DISTRIBUTION}
+ *
+ * If there are redundant links between any nodes, traffic distribution allows the
+ * redundant links to be used to improve performance.
+ *
+ * There are three types of traffic distribution. Their use is mutually exclusive, all
+ * can not be used at once.
+ *
+ * Coherent Traffic Distribution is for systems of exactly two nodes only.  All links must
+ * be symmetrical (the same width).  As many links as are connected can be distributed over.
+ *
+ * Victim Distribution is a way to direct victim traffic on to ganged links and away from unganged links
+ * as a way to reduce unganged link congestion for a system only if 2 processor (4 node) G34 system.
+ * A node can enables victim distribution mode only if the node connects to another node directly with
+ * only 1 unganged link hop and indirectly through 2 ganged link hops.
+ *
+ * Link Pair Traffic Distribution works with redundant pairs of links between any two nodes,
+ * it does not matter how many nodes are in the system or how many have a redundant link pair.
+ * A node can have redundant link pairs with more than one other node.
+ * The link pair can be asymmetric, the largest link must be used as the master.  However,
+ * between any pair of nodes there is only one pair of redundant links, and there is a limit
+ * to the total number of pairs each node can have.  So not all links will necessarily be
+ * made usable.
+ *
+ * @param[in]   State   port list data
+ */
+VOID
+TrafficDistribution (
+  IN       STATE_DATA *State
+  )
+{
+  UINT32 Links01;
+  UINT32 Links10;
+  UINT32 LinksAB;
+  UINT32 LinksBA;
+  UINT8  LinkCount;
+  UINT8  UngandLinkCount;
+  UINT8  VictimedRouteCount;
+  UINT8  i;
+  UINT8  LastLink;
+  BOOLEAN IsAsymmetric;
+  BOOLEAN IsVictimedRouteFound;
+  UINT8 RedundantLinkCount[MAX_NODES][MAX_NODES];
+  UINT8 MasterLinkPort[MAX_NODES][MAX_NODES];
+  UINT8 AlternateLinkPort[MAX_NODES][MAX_NODES];
+  UINT8 NodeA;
+  UINT8 NodeB;
+  UINT8 PairCount;
+  VICTIM_ROUTED_LINK VictimRoutedLink[MAX_NODES];
+  PORT_CONNECTION_STATE GangedLinkPort[MAX_NODES][MAX_NODES];
+
+  LastLink = 0xFF;
+  IsAsymmetric = FALSE;
+
+  // Traffic Distribution is only used when there are exactly two Nodes in the system
+  // and when all the links are symmetric, same width.
+  if ((State->NodesDiscovered + 1) == 2) {
+    Links01 = 0;
+    Links10 = 0;
+    LinkCount = 0;
+    for (i = 0; i < (State->TotalLinks * 2); i += 2) {
+      if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) &&
+          ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_CPU)) {
+        if ((LastLink != 0xFF) &&
+            ((*State->PortList)[i].SelWidthOut != (*State->PortList)[LastLink].SelWidthOut) &&
+            ((*State->PortList)[i + 1].SelWidthOut != (*State->PortList)[LastLink + 1].SelWidthOut)) {
+          IsAsymmetric = TRUE;
+          break;
+        }
+        Links01 |= (UINT32)1 << (*State->PortList)[i].Link;
+        Links10 |= (UINT32)1 << (*State->PortList)[i + 1].Link;
+        LinkCount++;
+        LastLink = i;
+      }
+    }
+    ASSERT (LinkCount != 0);
+    //  Don't setup Traffic Distribution if only one Link is being used or there were asymmetric widths
+    if ((LinkCount != 1) && !IsAsymmetric) {
+      IDS_HDT_CONSOLE (HT_TRACE, "Applying coherent traffic distribution.\n");
+      State->Nb->WriteTrafficDistribution (Links01, Links10, State->Nb);
+      // If we did Traffic Distribution, we must not do Link Pair, so get out of here.
+      return;
+    }
+  }
+
+  // Victim Distribution is only used when there are exactly two processor (4 node) system
+  // and the node connects to another node directly with only 1 unganged link hop and indirectly
+  // through 2 ganged link hops.
+  if ((State->NodesDiscovered + 1) == 4) {
+    UngandLinkCount = 0;
+
+    // Initialize the ganged link state data structures
+    for (NodeA = 0; NodeA < MAX_NODES; NodeA++) {
+      for (NodeB = 0; NodeB < MAX_NODES; NodeB++) {
+        GangedLinkPort[NodeA][NodeB].ConnectionState = 0;
+        GangedLinkPort[NodeA][NodeB].BigLinkPort = 0;
+      }
+    }
+
+    for (i = 0; i < (State->TotalLinks * 2); i += 2) {
+      if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) &&
+          ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_CPU)) {
+        NodeA = (*State->PortList)[i].NodeID;
+        NodeB = (*State->PortList)[i + 1].NodeID;
+        if ((((*State->PortList)[i].SelRegang == TRUE) &&
+              ((*State->PortList)[i].PrvWidthOutCap == HT_WIDTH_16_BITS)) ||
+              ((*State->PortList)[i].SelWidthOut == HT_WIDTH_16_BITS)) {
+          if (GangedLinkPort[NodeA][NodeB].ConnectionState <= Redundant) {
+            // Record it if it is the first ganged link connecting two nodes.
+            GangedLinkPort[NodeA][NodeB].BigLinkPort = (*State->PortList)[i].Link;
+            GangedLinkPort[NodeB][NodeA].BigLinkPort = (*State->PortList)[i + 1].Link;
+            GangedLinkPort[NodeA][NodeB].ConnectionState = GangedLink;
+            GangedLinkPort[NodeB][NodeA].ConnectionState = GangedLink;
+          }
+        } else {
+          if (GangedLinkPort[NodeA][NodeB].ConnectionState == Unconnected) {
+            // Save it if it is firstly unganged link and also does no exist ganged link between node A and node B.
+            GangedLinkPort[NodeA][NodeB].ConnectionState = UngangedLink;
+            GangedLinkPort[NodeB][NodeA].ConnectionState = UngangedLink;
+
+            UngandLinkCount++;
+          } else if (GangedLinkPort[NodeA][NodeB].ConnectionState == UngangedLink) {
+            // Ignore it if there are multi-unganged links between node A and node B.
+            GangedLinkPort[NodeA][NodeB].ConnectionState = Redundant;
+            GangedLinkPort[NodeB][NodeA].ConnectionState = Redundant;
+
+            // Adjust the count because had it recorded once.
+            UngandLinkCount--;
+          }
+        }
+      }
+    }
+
+    if (UngandLinkCount != 0) {
+      VictimedRouteCount = 0;
+
+      // Check Link by Link if one unganged link can direct victim traffic on to indirectly 2 ganged link hops
+      for (NodeA = 0; NodeA <= (State->NodesDiscovered); NodeA++) {
+        for (NodeB = NodeA +1; NodeB <= (State->NodesDiscovered); NodeB++) {
+          if (GangedLinkPort[NodeA][NodeB].ConnectionState == UngangedLink) {
+            // This is unganged link connecting two nodes
+            IsVictimedRouteFound = FALSE;
+
+            for (i = 0; i <= (State->NodesDiscovered); i++) {
+              if ((i != NodeA) && (i != NodeB) && (GangedLinkPort[NodeA][i].ConnectionState == GangedLink)) {
+                // This is the first ganged link hop to Destined Node
+                VictimRoutedLink[VictimedRouteCount].NodeA = NodeA;
+                VictimRoutedLink[VictimedRouteCount].VictimedLinkFromNodeAToNodeB = GangedLinkPort[NodeA][i].BigLinkPort;
+                if (GangedLinkPort[i][NodeB].ConnectionState == GangedLink) {
+                  // This is the second ganged link hop to Destined Node
+                  // Save the Destined Node and the Reversed Destination Link
+                  VictimRoutedLink[VictimedRouteCount].NodeB = NodeB;
+                  VictimRoutedLink[VictimedRouteCount].VictimedLinkFromNodeBToNodeA = GangedLinkPort[NodeB][i].BigLinkPort;
+                  if (!IsVictimedRouteFound) {
+                    VictimedRouteCount++;
+
+                    // This is first victimed route where there are indirectly 2 ganged link hops to Destined Node
+                    IsVictimedRouteFound = TRUE;
+                  } else {
+                    // This is second victimed route, so we need to replace to the new Reversed Destination Link
+                    VictimRoutedLink[VictimedRouteCount - 1].VictimedLinkFromNodeBToNodeA = GangedLinkPort[NodeB][i].BigLinkPort;
+                  }
+                }
+              }
+            }
+          }
+        }
+      }
+
+      // Setup Victim Distribution Mode
+      if (VictimedRouteCount != 0) {
+        IDS_HDT_CONSOLE (HT_TRACE, "Applying coherent Victim distribution.\n");
+        LinksAB = 0;
+        LinksBA = 0;
+        for (i = 0; i < VictimedRouteCount; i++) {
+          LinksAB = (UINT32)1 << VictimRoutedLink[i].VictimedLinkFromNodeAToNodeB;
+          LinksBA = (UINT32)1 << VictimRoutedLink[i].VictimedLinkFromNodeBToNodeA;
+          State->Nb->WriteVictimDistribution (
+            VictimRoutedLink[i].NodeA,
+            VictimRoutedLink[i].NodeB,
+            LinksAB,
+            LinksBA,
+            State->Nb
+            );
+        }
+        // If we did Victim Distribution, we must not do Link Pair when there are more than two nodes, so exit here.
+        return;
+      }
+    }
+  }
+
+  // Either there are more than two nodes, Asymmetric links, or no redundant links.
+  // See if we can use Link Pair Traffic Distribution
+  LibAmdMemFill (&RedundantLinkCount, 0, (MAX_NODES * MAX_NODES), State->ConfigHandle);
+  for (i = 0; i < (State->TotalLinks * 2); i += 2) {
+    if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) &&
+        ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_CPU)) {
+      NodeA = (*State->PortList)[i].NodeID;
+      NodeB = (*State->PortList)[i + 1].NodeID;
+      if (RedundantLinkCount[NodeA][NodeB] == 0) {
+        // This is the first link connecting two nodes
+        ASSERT (RedundantLinkCount[NodeB][NodeA] == 0);
+        MasterLinkPort[NodeA][NodeB] = i;
+        MasterLinkPort[NodeB][NodeA] = i + 1;
+      } else {
+        // This is a redundant link.  If it is larger than the current master link,
+        // make it the new master link.
+        //
+        if (((*State->PortList)[MasterLinkPort[NodeA][NodeB]].SelWidthOut < (*State->PortList)[i].SelWidthOut) &&
+            ((*State->PortList)[MasterLinkPort[NodeB][NodeA]].SelWidthOut < (*State->PortList)[i + 1].SelWidthOut)) {
+          // Make the old master link the alternate, we don't need to check, it is bigger.
+          AlternateLinkPort[NodeA][NodeB] = MasterLinkPort[NodeA][NodeB];
+          AlternateLinkPort[NodeB][NodeA] = MasterLinkPort[NodeB][NodeA];
+          MasterLinkPort[NodeA][NodeB] = i;
+          MasterLinkPort[NodeB][NodeA] = i + 1;
+        } else {
+          // Since the new link isn't bigger than the Master, check if it is bigger than the alternate,
+          // if we have an alternate. If we don't have an alternate yet, make this link the alternate.
+          if (RedundantLinkCount[NodeA][NodeB] == 1) {
+            AlternateLinkPort[NodeA][NodeB] = i;
+            AlternateLinkPort[NodeB][NodeA] = i + 1;
+          } else {
+            if (((*State->PortList)[AlternateLinkPort[NodeA][NodeB]].SelWidthOut < (*State->PortList)[i].SelWidthOut) &&
+                ((*State->PortList)[AlternateLinkPort[NodeB][NodeA]].SelWidthOut < (*State->PortList)[i + 1].SelWidthOut)) {
+              // Warning: the alternate link is an unusable redundant link
+              // Then make the new link the alternate link.
+              NotifyWarningOptUnusedLinks (
+                NodeA,
+                (*State->PortList)[AlternateLinkPort[NodeA][NodeB]].Link,
+                NodeB,
+                (*State->PortList)[AlternateLinkPort[NodeB][NodeA]].Link,
+                State
+                );
+              ASSERT (RedundantLinkCount[NodeB][NodeA] > 1);
+              AlternateLinkPort[NodeA][NodeB] = i;
+              AlternateLinkPort[NodeB][NodeA] = i + 1;
+            } else {
+              // Warning the current link is an unusable redundant link
+              NotifyWarningOptUnusedLinks (NodeA, (*State->PortList)[i].Link, NodeB, (*State->PortList)[i].Link, State);
+            }
+          }
+        }
+      }
+      RedundantLinkCount[NodeA][NodeB]++;
+      RedundantLinkCount[NodeB][NodeA]++;
+    }
+  }
+  // If we found any, now apply up to 4 per node
+  for (NodeA = 0; NodeA < MAX_NODES; NodeA++) {
+    PairCount = 0;
+    for (NodeB = 0; NodeB < MAX_NODES; NodeB++) {
+      if (RedundantLinkCount[NodeA][NodeB] > 1) {
+        // Then there is a pair of links (at least, but we only care about the pair not the extras)
+        if (PairCount < MAX_LINK_PAIRS) {
+          // Program it
+          if ((*State->PortList)[MasterLinkPort[NodeA][NodeB]].SelWidthOut
+              != (*State->PortList)[AlternateLinkPort[NodeA][NodeB]].SelWidthOut) {
+            IsAsymmetric = TRUE;
+          } else {
+            IsAsymmetric = FALSE;
+          }
+          State->Nb->WriteLinkPairDistribution (
+            NodeA,
+            NodeB,
+            PairCount,
+            IsAsymmetric,
+            (*State->PortList)[MasterLinkPort[NodeA][NodeB]].Link,
+            (*State->PortList)[AlternateLinkPort[NodeA][NodeB]].Link,
+            State->Nb
+            );
+          PairCount++;
+        } else {
+          // Warning: More link pairs than can be distributed
+          NotifyWarningOptLinkPairExceed (
+            NodeA, NodeB,
+            (*State->PortList)[MasterLinkPort[NodeA][NodeB]].Link,
+            (*State->PortList)[AlternateLinkPort[NodeA][NodeB]].Link,
+            State);
+          // Disable the link pair from the other node, the analysis loop made sure there
+          // can only be a single link pair between a pair of nodes.
+          RedundantLinkCount[NodeB][NodeA] = 1;
+        }
+      }
+    }
+    IDS_HDT_CONSOLE (
+      HT_TRACE,
+      ((PairCount != 0) ?
+       "Node %d applying %d link pair distributions.\n" :
+       ""),
+      NodeA,
+      PairCount
+      );
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatTrafficDistribution.h b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatTrafficDistribution.h
new file mode 100644
index 0000000000..8fda546892
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htFeatTrafficDistribution.h
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Traffic Distribution Interface.
+ *
+ * Interface to traffic distribution feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_FEAT_TRAFFIC_DISTRIBUTION_H_
+#define _H_TFEAT_TRAFFIC_DISTRIBUTION_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+/**
+ * Identify Links which can have traffic distribution.
+ *
+ */
+VOID
+TrafficDistribution (
+  IN       STATE_DATA *State
+  );
+
+#endif  /* _HT_FEAT_TRAFFIC_DISTRIBUTION_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htIds.c b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htIds.c
new file mode 100644
index 0000000000..05028dbcc3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/Features/htIds.c
@@ -0,0 +1,150 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD IDS HyperTransport Implementation.
+ *
+ * Contains AMD AGESA Integrated Debug HT related support.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "IdsHt.h"
+#include "htInterface.h"
+#include "htInterfaceGeneral.h"
+#include "htNb.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_HT_FEATURES_HTIDS_FILECODE
+
+
+/*-------------------------------------------------------------------------------------*/
+/**
+ * Apply an IDS port override to the desired HT link.
+ *
+ * The IDS port override allows absolute control of a link's frequency and width, such as
+ * would be used for board characterization and test.  The IDS backend code is responsible
+ * for handling the NV items and building them into a port override list.  Here we search
+ * that list for any overrides which apply, and update the data used by the HT feature code.
+ *
+ * @param[in]      IsSourcePort         Since we handle both ports on a match, only do that if TRUE.
+ * @param[in,out]  Port0                The PORTLIST item for the first endpoint of a link.
+ * @param[in,out]  Port1                The PORTLIST item for the second endpoint of a link.
+ * @param[in,out]  PortOverrideList     IN: A pointer to the port override list or NULL,
+ *                                      OUT: A pointer to the port override list.
+ * @param[in]      State                access to ht interface and nb support methods.
+ *
+ */
+VOID
+HtIdsGetPortOverride (
+  IN       BOOLEAN                    IsSourcePort,
+  IN OUT   PORT_DESCRIPTOR            *Port0,
+  IN OUT   PORT_DESCRIPTOR            *Port1,
+  IN OUT   HTIDS_PORT_OVERRIDE_LIST   *PortOverrideList,
+  IN       STATE_DATA                 *State
+  )
+{
+  LOCATE_HEAP_PTR LocHeapParams;
+  UINT8 SocketA;
+  UINT8 SocketB;
+  UINT8 PackageLinkA;
+  UINT8 PackageLinkB;
+  HTIDS_PORT_OVERRIDE_LIST   p;
+
+  if (IsSourcePort) {
+    ASSERT (PortOverrideList != NULL);
+    // The caller can cache the override list by providing the pointer (to the heap buffer).
+    // If the pointer to the port override list is null, then check if it is on the heap,
+    // and update the caller's pointer so it is cached.
+    // If the buffer is not in heap, call the IDS backend to get the NV data (which is likely also
+    // in heap).
+    if (*PortOverrideList == NULL) {
+      // locate the table in heap
+      LocHeapParams.BufferHandle = IDS_HT_DATA_HANDLE;
+      if (HeapLocateBuffer (&LocHeapParams, State->ConfigHandle) == AGESA_SUCCESS) {
+        *PortOverrideList = (HTIDS_PORT_OVERRIDE_LIST)LocHeapParams.BufferPtr;
+      } else {
+        // Ask IDS backend code for the list
+        IDS_OPTION_HOOK (IDS_HT_CONTROL, PortOverrideList, State->ConfigHandle);
+      }
+    }
+    ASSERT (*PortOverrideList != NULL);
+
+    // Search the port override list to see if there is an override that applies to this link.
+    // The match criteria are if either endpoint of the current port list item matches
+    // port override.
+    p = *PortOverrideList;
+    SocketA = State->HtInterface->GetSocketFromMap (Port0->NodeID, State);
+    PackageLinkA = State->Nb->GetPackageLink (Port0->NodeID, Port0->Link, State->Nb);
+    SocketB = State->HtInterface->GetSocketFromMap (Port1->NodeID, State);
+    PackageLinkB = State->Nb->GetPackageLink (Port1->NodeID, Port1->Link, State->Nb);
+
+    while ((p != NULL) && (p->Socket != HT_LIST_TERMINAL)) {
+      if ((((p->Socket == SocketA) || (p->Socket == HT_LIST_MATCH_ANY)) &&
+		  ((p->Link == PackageLinkA) || ((p->Link == HT_LIST_MATCH_ANY) &&
+		  (!IsPackageLinkInternal (PackageLinkA))) || ((p->Link == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkA))))) ||
+		(((p->Socket == SocketB) || (p->Socket == HT_LIST_MATCH_ANY)) &&
+		  ((p->Link == PackageLinkB) || ((p->Link == HT_LIST_MATCH_ANY) &&
+		  (!IsPackageLinkInternal (PackageLinkA))) || ((p->Link == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkB))))))
+	  {
+        // Found a match, update width and frequency of both endpoints.
+        if (p->WidthIn != HT_LIST_TERMINAL) {
+          Port0->SelWidthIn = p->WidthIn;
+          Port1->SelWidthOut = p->WidthIn;
+        }
+        if (p->WidthOut != HT_LIST_TERMINAL) {
+          Port0->SelWidthOut = p->WidthOut;
+          Port1->SelWidthIn = p->WidthOut;
+        }
+        if (p->Frequency != HT_LIST_TERMINAL) {
+          Port0->SelFrequency = p->Frequency;
+          Port1->SelFrequency = p->Frequency;
+        }
+        break;
+      } else {
+        p++;
+      }
+    }
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbCoherent.c b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbCoherent.c
new file mode 100644
index 0000000000..4eca9e98d8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbCoherent.c
@@ -0,0 +1,492 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Coherent Feature Northbridge routines.
+ *
+ * Provide access to hardware for routing, coherent discovery.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbCoherent.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_NBCOMMON_HTNBCOHERENT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***               FAMILY/NORTHBRIDGE SPECIFIC FUNCTIONS                 ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Establish a Temporary route from one Node to another.
+ *
+ * @HtNbMethod{::F_WRITE_ROUTING_TABLE}
+ *
+ * This routine will modify the routing tables on the
+ * SourceNode to cause it to route both request and response traffic to the
+ * targetNode through the specified Link.
+ *
+ * @note: This routine is to be used for early discovery and initialization.  The
+ * final routing tables must be loaded some other way because this
+ * routine does not address the issue of probes, or independent request
+ * response paths.
+ *
+ * @param[in]     Node     the Node that will have it's routing tables modified.
+ * @param[in]     Target   For routing to Node target
+ * @param[in]     Link     Link from Node to target
+ * @param[in]     Nb       this northbridge
+ */
+VOID
+WriteRoutingTable (
+  IN       UINT8       Node,
+  IN       UINT8       Target,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 Temp;
+
+  ASSERT ((Node < MAX_NODES) && (Target < MAX_NODES) && (Link < Nb->MaxLinks));
+  Temp = (Nb->SelfRouteResponseMask | Nb->SelfRouteRequestMask) << (Link + 1);
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_ROUTE0_0X40 + (Target * 4));
+  LibAmdPciWrite (AccessWidth32, Reg, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Modifies the NodeID register on the target Node
+ *
+ * @HtNbMethod{::F_WRITE_NODEID}
+ *
+ * @param[in]     Node   the Node that will have its NodeID altered.
+ * @param[in]     NodeID the new value for NodeID
+ * @param[in]     Nb     this northbridge
+ */
+VOID
+WriteNodeID (
+  IN       UINT8       Node,
+  IN       UINT8       NodeID,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 Temp;
+  Temp = NodeID;
+  ASSERT ((Node < MAX_NODES) && (NodeID < MAX_NODES));
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_NODE_ID_0X60);
+  LibAmdPciWriteBits (Reg, 2, 0, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read the Default Link
+ *
+ * @HtNbMethod{::F_READ_DEFAULT_LINK}
+ *
+ * Read the DefLnk (the source Link of the current packet) from Node. Since this code
+ * is running on the BSP, this should be the Link pointing back towards the BSP.
+ *
+ * @param[in]     Node   the Node that will have its NodeID altered.
+ * @param[in]     Nb     this northbridge
+ *
+ * @return The HyperTransport Link where the request to
+ *         read the default Link came from.
+ */
+UINT8
+ReadDefaultLink (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 DefaultLink;
+  PCI_ADDR Reg;
+  UINT32 Temp;
+
+  DefaultLink = 0;
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_LINK_INIT_CONTROL_0X6C);
+
+  ASSERT ((Node < MAX_NODES));
+  LibAmdPciReadBits (Reg, 3, 2, &DefaultLink, Nb->ConfigHandle);
+  LibAmdPciReadBits (Reg, 8, 8, &Temp, Nb->ConfigHandle);
+  DefaultLink |= (Temp << 2);
+  return (UINT8)DefaultLink;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Turns routing tables on for a given Node
+ *
+ * @HtNbMethod{::F_ENABLE_ROUTING_TABLES}
+ *
+ * @param[in] Node the Node that will have it's routing tables enabled
+ * @param[in] Nb   this northbridge
+ */
+VOID
+EnableRoutingTables (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 Temp;
+  Temp = 0;
+  ASSERT ((Node < MAX_NODES));
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_LINK_INIT_CONTROL_0X6C);
+  LibAmdPciWriteBits (Reg, 0, 0, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Turns routing tables off for a given Node
+ *
+ * @HtNbMethod{::F_DISABLE_ROUTING_TABLES}
+ *
+ * @param[in] Node the Node that will have it's routing tables disabled
+ * @param[in] Nb   this northbridge
+ */
+VOID
+DisableRoutingTables (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 Temp;
+  Temp = 1;
+  ASSERT ((Node < MAX_NODES));
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_LINK_INIT_CONTROL_0X6C);
+  LibAmdPciWriteBits (Reg, 0, 0, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Verify that the Link is coherent, connected, and ready
+ *
+ * @HtNbMethod{::F_VERIFY_LINK_IS_COHERENT}
+ *
+ * @param[in]     Node    the Node that will be examined
+ * @param[in]     Link    the Link on that Node to examine
+ * @param[in]     Nb      this northbridge
+ *
+ * @retval        TRUE    The Link has the following status
+ *                        -  LinkCon=1,           Link is connected
+ *                        -  InitComplete=1,      Link initialization is complete
+ *                        -  NC=0,                Link is coherent
+ *                        -  UniP-cLDT=0,         Link is not Uniprocessor cLDT
+ *                        -  LinkConPend=0        Link connection is not pending
+ *  @retval       FALSE   The Link has some other status
+*/
+BOOLEAN
+VerifyLinkIsCoherent (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 LinkType;
+  PCI_ADDR LinkBase;
+
+  ASSERT ((Node < MAX_NODES) && (Link < Nb->MaxLinks));
+
+  LinkBase = Nb->MakeLinkBase (Node, Link, Nb);
+
+  //  FN0_98/A4/C4 = LDT Type Register
+  LinkBase.Address.Register += HTHOST_LINK_TYPE_REG;
+  LibAmdPciRead (AccessWidth32, LinkBase, &LinkType, Nb->ConfigHandle);
+
+  //  Verify LinkCon = 1, InitComplete = 1, NC = 0, UniP-cLDT = 0, LinkConPend = 0
+  return (BOOLEAN) ((LinkType & HTHOST_TYPE_MASK) ==  HTHOST_TYPE_COHERENT);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read the token stored in the scratchpad register field.
+ *
+ * @HtNbMethod{::F_READ_TOKEN}
+ *
+ * Use the CPU core count as a scratch pad.
+ *
+ * @note The location used to store the token is arbitrary.  The only requirement is
+ * that the location warm resets to zero, and that using it will have no ill-effects
+ * during HyperTransport initialization.
+ *
+ * @param[in]     Node    the Node that will be examined
+ * @param[in]     Nb      this northbridge
+ *
+ * @return        the Token read from the Node
+ */
+UINT8
+ReadToken (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR Reg;
+
+  ASSERT ((Node < MAX_NODES));
+  // Use CpuCnt as a scratch register
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_NODE_ID_0X60);
+  LibAmdPciReadBits (Reg, 19, 16, &Temp, Nb->ConfigHandle);
+
+  return (UINT8)Temp;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write the token stored in the scratchpad register
+ *
+ * @HtNbMethod{::F_WRITE_TOKEN}
+ *
+ * Use the CPU core count as a scratch pad.
+ *
+ * @note The location used to store the token is arbitrary.  The only requirement is
+ * that the location warm resets to zero, and that using it will have no ill-effects
+ * during HyperTransport initialization.
+ *
+ * @param[in]     Node  the Node that marked with token
+ * @param[in]     Value the token Value
+ * @param[in]     Nb    this northbridge
+ */
+VOID
+WriteToken (
+  IN       UINT8       Node,
+  IN       UINT8       Value,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 Temp;
+  Temp = Value;
+  ASSERT ((Node < MAX_NODES));
+  // Use CpuCnt as a scratch register
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_NODE_ID_0X60);
+  LibAmdPciWriteBits (Reg, 19, 16, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Full Routing Table Register initialization
+ *
+ * @HtNbMethod{::F_WRITE_FULL_ROUTING_TABLE}
+ *
+ * Write the routing table entry for Node to target, using the request Link, response
+ * Link, and broadcast Links provided.
+ *
+ * @param[in]     Node            the Node that will be examined
+ * @param[in]     Target          the Target Node for these routes
+ * @param[in]     ReqLink         the Link for requests to Target
+ * @param[in]     RspLink         the Link for responses to Target
+ * @param[in]     BroadcastLinks  the broadcast Links
+ * @param[in]     Nb              this northbridge
+ */
+VOID
+WriteFullRoutingTable (
+  IN       UINT8       Node,
+  IN       UINT8       Target,
+  IN       UINT8       ReqLink,
+  IN       UINT8       RspLink,
+  IN       UINT32      BroadcastLinks,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 Value;
+
+  Value = 0;
+  ASSERT ((Node < MAX_NODES) && (Target < MAX_NODES));
+  if (ReqLink == ROUTE_TO_SELF) {
+    Value |= Nb->SelfRouteRequestMask;
+  } else {
+    Value |= Nb->SelfRouteRequestMask << (ReqLink + 1);
+  }
+
+  if (RspLink == ROUTE_TO_SELF) {
+    Value |= Nb->SelfRouteResponseMask;
+  } else {
+    Value |= Nb->SelfRouteResponseMask << (RspLink + 1);
+  }
+
+  // Allow us to accept a Broadcast ourselves, then set broadcasts for routes
+  Value |= (UINT32)1 << Nb->BroadcastSelfBit;
+  Value |= (UINT32)BroadcastLinks << (Nb->BroadcastSelfBit + 1);
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_ROUTE0_0X40 + (Target * 4));
+  LibAmdPciWrite (AccessWidth32, Reg, &Value, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Determine whether a Node is compatible with the discovered configuration so far.
+ *
+ * @HtNbMethod{::F_IS_ILLEGAL_TYPE_MIX}.
+ *
+ * Currently, that means the family, extended family of the new Node are the
+ * same as the BSP's.
+ *
+ * @param[in] Node the Node
+ * @param[in] Nb   this northbridge
+ *
+ * @retval   TRUE    the new node is not compatible
+ * @retval   FALSE   the new node is compatible
+ */
+BOOLEAN
+IsIllegalTypeMix (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  return ((BOOLEAN) ((Nb->MakeKey (Node, Nb) & Nb->CompatibleKey) == 0));
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Fix (hopefully) exceptional conditions.
+ *
+ * @HtNbMethod{::F_HANDLE_SPECIAL_NODE_CASE}.
+ *
+ * Currently, this routine is implemented for all coherent HT families to check
+ * vendor ID of coherent Node. If the vendor ID is 0x1022 then return FALSE,
+ * or return TRUE.
+ *
+ * @param[in] Node  The Node which need to be checked.
+ * @param[in] Link  The link to check for special conditions.
+ * @param[in] State our global state.
+ * @param[in] Nb    this northbridge.
+ *
+ * @retval    TRUE  This node received special handling.
+ * @retval    FALSE This node was not handled specially, handle it normally.
+ *
+ */
+BOOLEAN
+HandleSpecialNodeCase (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  BOOLEAN Result;
+  PCI_ADDR Reg;
+  UINT32 VendorID;
+
+  Result = TRUE;
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 0,
+                                 0);
+
+  LibAmdPciReadBits (Reg, 15, 0, &VendorID, Nb->ConfigHandle);
+  if (VendorID == 0x1022) {
+    Result = FALSE;
+  }
+
+  return Result;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbCoherent.h b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbCoherent.h
new file mode 100644
index 0000000000..74c2a9c857
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbCoherent.h
@@ -0,0 +1,178 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Coherent Feature Northbridge common routines.
+ *
+ * Provide access to hardware for routing, coherent discovery.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***               FAMILY/NORTHBRIDGE GENERIC FUNCTIONS                 ***
+ ***************************************************************************/
+
+/**
+ * Establish a Temporary route from one Node to another.
+ *
+ */
+VOID
+WriteRoutingTable (
+  IN       UINT8       Node,
+  IN       UINT8       Target,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Modifies the NodeID register on the target Node
+ *
+ */
+VOID
+WriteNodeID (
+  IN       UINT8       Node,
+  IN       UINT8       NodeID,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Read the Default Link
+ *
+ */
+UINT8
+ReadDefaultLink (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Turns routing tables on for a given Node
+ *
+ */
+VOID
+EnableRoutingTables (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Turns routing tables off for a given Node
+ *
+ */
+VOID
+DisableRoutingTables (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Verify that the Link is coherent, connected, and ready
+ *
+*/
+BOOLEAN
+VerifyLinkIsCoherent (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Read the token stored in the scratchpad register field.
+ *
+ */
+UINT8
+ReadToken (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Write the token stored in the scratchpad register
+ *
+ */
+VOID
+WriteToken (
+  IN       UINT8       Node,
+  IN       UINT8       Value,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Full Routing Table Register initialization
+ *
+ */
+VOID
+WriteFullRoutingTable (
+  IN       UINT8       Node,
+  IN       UINT8       Target,
+  IN       UINT8       ReqLink,
+  IN       UINT8       RspLink,
+  IN       UINT32      BroadcastLinks,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Determine whether a Node is compatible with the discovered configuration so far.
+ *
+ */
+BOOLEAN
+IsIllegalTypeMix (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Fix (hopefully) exceptional conditions.
+ *
+ */
+BOOLEAN
+HandleSpecialNodeCase (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbNonCoherent.c b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbNonCoherent.c
new file mode 100644
index 0000000000..b563f3cfc3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbNonCoherent.c
@@ -0,0 +1,142 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ *  Northbridge generic non-coherent support routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbNonCoherent.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_NBCOMMON_HTNBNONCOHERENT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***                       Non-coherent init code                        ***
+ ***                    Northbridge access routines                      ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return the Link to the Southbridge
+ *
+ * @HtNbMethod{::F_READ_SB_LINK}
+ *
+ * @param[in] Nb this northbridge
+ *
+ * @return the Link to the southbridge
+ */
+UINT8
+ReadSouthbridgeLink (
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR Reg;
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (0),
+                                 MakePciBusFromNode (0),
+                                 MakePciDeviceFromNode (0),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_UNIT_ID_0X64);
+  LibAmdPciReadBits (Reg, 10, 8, &Temp, Nb->ConfigHandle);
+  return (UINT8)Temp;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Verify that the Link is non-coherent, connected, and ready
+ *
+ * @HtNbMethod{::F_VERIFY_LINK_IS_NON_COHERENT}
+ *
+ * @param[in]     Node    the Node that will be examined
+ * @param[in]     Link    the Link on that Node to examine
+ * @param[in]     Nb      this northbridge
+ *
+ * @retval        TRUE    The Link has the following status
+ *                            - LinkCon=1,        Link is connected
+ *                            - InitComplete=1,   Link initialization is complete
+ *                            - NC=1,             Link is noncoherent
+ *                            - UniP-cLDT=0,      Link is not Uniprocessor cLDT
+ *                            - LinkConPend=0     Link connection is not pending
+ *  @retval       FALSE   The Link has some other status
+ */
+BOOLEAN
+VerifyLinkIsNonCoherent (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 LinkType;
+  PCI_ADDR LinkBase;
+
+  ASSERT ((Node < MAX_NODES) && (Link < MAX_NODES));
+
+  LinkBase = Nb->MakeLinkBase (Node, Link, Nb);
+  LinkBase.Address.Register += HTHOST_LINK_TYPE_REG;
+
+  // FN0_98/A4/C4 = LDT Type Register
+  LibAmdPciRead (AccessWidth32, LinkBase, &LinkType, Nb->ConfigHandle);
+
+  // Verify LinkCon = 1, InitComplete = 1, NC = 1, UniP-cLDT = 0, LinkConPend = 0
+  return (BOOLEAN) ((LinkType & HTHOST_TYPE_MASK) ==  HTHOST_TYPE_NONCOHERENT);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbNonCoherent.h b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbNonCoherent.h
new file mode 100644
index 0000000000..c56c14b923
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbNonCoherent.h
@@ -0,0 +1,62 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ *  Northbridge generic non-coherent support routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/**
+ * Return the Link to the Southbridge
+ */
+UINT8
+ReadSouthbridgeLink (
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Verify that the Link is non-coherent, connected, and ready
+ *
+ */
+BOOLEAN
+VerifyLinkIsNonCoherent (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbOptimization.c b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbOptimization.c
new file mode 100644
index 0000000000..26aa0381f6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbOptimization.c
@@ -0,0 +1,258 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Link optimization support.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "IdsHt.h"
+#include "htInterface.h"
+#include "htInterfaceGeneral.h"
+#include "htNotify.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbOptimization.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_NBCOMMON_HTNBOPTIMIZATION_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***                            Link Optimization                        ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get Link features into system data structure.
+ *
+ * @HtNbMethod{::F_GATHER_LINK_FEATURES}
+ *
+ * For a specific discovered CPU Link, populate the port list with the frequency
+ * capabilities.  Support for other link oriented capabilities, currently:
+ * - Unit ID Clumping. Set to disabled. This doesn't mean the CPU doesn't support clumping,
+ *   it just means:
+ *   - The CPU doesn't clump its host unit ids, and
+ *   - We don't have to check as carefully in SetLinkData whether the port is an IO host link.
+ *
+ * @param[in,out] ThisPort         The PortList structure entry for this link's port
+ * @param[in]     Interface        Access to non-HT support functions.
+ * @param[in]     PlatformConfig   Platform profile/build option config structure.
+ * @param[in]     Nb               this northbridge
+ */
+VOID
+GatherLinkFeatures (
+  IN OUT   PORT_DESCRIPTOR        *ThisPort,
+  IN       HT_INTERFACE           *Interface,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       NORTHBRIDGE            *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 Frequency;
+  UINT32 ExtendedFrequency;
+
+  Reg = ThisPort->Pointer;
+  Reg.Address.Register += HTHOST_FREQ_REV_REG;
+  LibAmdPciReadBits (Reg, 30, 16, &Frequency, Nb->ConfigHandle);
+  Reg = ThisPort->Pointer;
+  Reg.Address.Register += HTHOST_FREQ_EXTENSION;
+  LibAmdPciReadBits (Reg, 15, 1, &ExtendedFrequency, Nb->ConfigHandle);
+  ThisPort->PrvFrequencyCap = ((Frequency | (ExtendedFrequency << HT_FREQUENCY_2800M)) &
+                               Nb->NorthBridgeFreqMask (ThisPort->NodeID, Interface, PlatformConfig, Nb));
+  // Check for Internal link restriction not to run at 1000 MHz (but allow lower)
+  if (IsPackageLinkInternal (Nb->GetPackageLink (ThisPort->NodeID, ThisPort->Link, Nb))) {
+    ThisPort->PrvFrequencyCap &= ~(HT_FREQUENCY_LIMIT_1000M & ~HT_FREQUENCY_LIMIT_800M);
+  }
+  ThisPort->ClumpingSupport = HT_CLUMPING_DISABLE;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure for link reganging.
+ *
+ * @HtNbMethod{::F_SET_LINK_REGANG}
+ *
+ * @param[in]     Node   the node on which to regang a link
+ * @param[in]     Link   the sublink 0 of the sublink pair to regang
+ * @param[in]     Nb     this northbridge
+ */
+VOID
+SetLinkRegang (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 Temp;
+
+  Temp = 1;
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_HT_LINK_EXT_CONTROL0_0X170 + (4 * Link));
+
+  LibAmdPciWriteBits (Reg, 0, 0, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure  for Unit Id Clumping.
+ *
+ * @HtNbMethod{::F_SET_LINK_UNITID_CLUMPING}
+ *
+ * This applies to the host root of a non-coherent chain.
+ *
+ * @param[in]     Node              the node on which to enable clumping
+ * @param[in]     Link              the link for which to enable clumping
+ * @param[in]     ClumpingEnables   the unit id clumping enables
+ * @param[in]     Nb                this northbridge
+ */
+VOID
+SetLinkUnitIdClumping (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       UINT32      ClumpingEnables,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR Reg;
+
+  // Host Unit Ids are not clumped.
+  ASSERT ((ClumpingEnables & 0x3) == 0);
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_HT_LINK_CLUMPING0_0X110 + (4 * Link));
+
+  LibAmdPciWriteBits (Reg, 31, 0, &ClumpingEnables, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure for link frequency.
+ *
+ * @HtNbMethod{::F_SET_LINK_FREQUENCY}
+ *
+ * Handle extended frequencies.  For HT3 frequencies, ensure Retry and Scrambling are
+ * set. For HT1, clear them.
+ *
+ * @param[in]     Node        the node on which to set frequency for a link
+ * @param[in]     Link        the link to set frequency
+ * @param[in]     Frequency   the frequency to set
+ * @param[in]     Nb          this northbridge
+ */
+VOID
+SetLinkFrequency (
+  IN       UINT8          Node,
+  IN       UINT8          Link,
+  IN       UINT8          Frequency,
+  IN       NORTHBRIDGE    *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR Reg;
+
+  ASSERT ((Frequency >= HT_FREQUENCY_600M && Frequency <= HT_FREQUENCY_3200M)
+          || (Frequency == HT_FREQUENCY_200M) || (Frequency == HT_FREQUENCY_400M));
+
+  // Handle extended frequencies, 2800 MHz and above.  31 > Frequency > 16 in this case.
+  if (Frequency > HT_FREQUENCY_2600M) {
+    Temp = 1;
+  } else {
+    // Clear it if not extended.
+    Temp = 0;
+  }
+  Reg = Nb->MakeLinkBase (Node, Link, Nb);
+  Reg.Address.Register += HTHOST_FREQ_EXTENSION;
+  LibAmdPciWriteBits (Reg, 0, 0, &Temp, Nb->ConfigHandle);
+  Reg = Nb->MakeLinkBase (Node, Link, Nb);
+  Reg.Address.Register += HTHOST_FREQ_REV_REG;
+  Temp = (Frequency & 0x0F);
+  LibAmdPciWriteBits (Reg, 11, 8, &Temp, Nb->ConfigHandle);
+  //  Gen1 = 200Mhz -> 1000MHz, Gen3 = 1200MHz -> 2600MHz
+  if (Frequency > HT_FREQUENCY_1000M) {
+    // Enable  for Gen3 frequencies
+    Temp = 1;
+  } else {
+    // Disable  for Gen1 frequencies
+    Temp = 0;
+  }
+  // HT3 retry mode enable / disable
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_HT_LINK_RETRY0_0X130 + (4 * Link));
+  LibAmdPciWriteBits (Reg, 0, 0, &Temp, Nb->ConfigHandle);
+  // and Scrambling enable / disable
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_HT_LINK_EXT_CONTROL0_0X170 + (4 * Link));
+  LibAmdPciWriteBits (Reg, 3, 3, &Temp, Nb->ConfigHandle);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbOptimization.h b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbOptimization.h
new file mode 100644
index 0000000000..56f719cb2d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbOptimization.h
@@ -0,0 +1,91 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Link optimization generic support.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/**
+ * Get Link features into system data structure.
+ *
+ */
+VOID
+GatherLinkFeatures (
+  IN OUT   PORT_DESCRIPTOR        *ThisPort,
+  IN       HT_INTERFACE           *Interface,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       NORTHBRIDGE            *Nb
+  );
+
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure.
+ *
+ */
+VOID
+SetLinkRegang (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Set the link's Unit Id Clumping enable.
+ *
+ */
+VOID
+SetLinkUnitIdClumping (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       UINT32      ClumpingEnables,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure.
+ */
+VOID
+SetLinkFrequency (
+  IN       UINT8          Node,
+  IN       UINT8          Link,
+  IN       UINT8          Frequency,
+  IN       NORTHBRIDGE    *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbUtilities.c b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbUtilities.c
new file mode 100644
index 0000000000..237cccc3ea
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbUtilities.c
@@ -0,0 +1,335 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge utility routines.
+ *
+ * These routines are needed for support of more than one feature area.
+ * Collect them in this file so build options don't remove them.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNotify.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbUtilities.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_NBCOMMON_HTNBUTILITIES_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return the HT Host capability base PCI config address for a Link.
+ *
+ * @HtNbMethod{::F_MAKE_LINK_BASE}
+ *
+ * @param[in]     Node    the Node this Link is on
+ * @param[in]     Link    the Link
+ * @param[in]     Nb      this northbridge
+ *
+ * @return  the pci config address
+ */
+PCI_ADDR
+MakeLinkBase (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR LinkBase;
+
+  ASSERT (Nb != NULL);
+  if (Link < 4) {
+    LinkBase.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                        MakePciBusFromNode (Node),
+                                        MakePciDeviceFromNode (Node),
+                                        CPU_HTNB_FUNC_00,
+                                        REG_HT_CAP_BASE_0X80 + Link*HT_HOST_CAP_SIZE);
+  } else {
+    LinkBase.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                        MakePciBusFromNode (Node),
+                                        MakePciDeviceFromNode (Node),
+                                        CPU_HTNB_FUNC_04,
+                                        REG_HT_CAP_BASE_0X80 + (Link - 4)*HT_HOST_CAP_SIZE);
+  }
+  return LinkBase;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return the LinkFailed status AFTER an attempt is made to clear the bit.
+ *
+ * @HtNbMethod{::F_READ_TRUE_LINK_FAIL_STATUS}
+ *
+ * Dependency!:  HT_FEATURES::SetHtControlRegisterBits
+ *
+ * Also, call event notify if a Hardware Fault caused a sync flood on a previous boot.
+ *
+ * The table below summarizes correct responses of this routine.
+ * <TABLE>
+ *   <TR><TD> Family </TD> <TD> before </TD> <TD> after </TD> <TD> unconnected </TD> <TD> Notify? </TD> <TD> return </TD></TR>
+ *   <TR><TD>  10    </TD> <TD>   0    </TD> <TD>   0   </TD> <TD>     0       </TD> <TD>   No    </TD> <TD> FALSE  </TD></TR>
+ *   <TR><TD>  10    </TD> <TD>   1    </TD> <TD>   0   </TD> <TD>     0       </TD> <TD>   Yes   </TD> <TD> FALSE  </TD></TR>
+ *   <TR><TD>  10    </TD> <TD>   1    </TD> <TD>   0   </TD> <TD>     3       </TD> <TD>   No    </TD> <TD> TRUE   </TD></TR>
+ * </TABLE>
+ *
+ * @param[in]     Node   the Node that will be examined
+ * @param[in]     Link   the Link on that Node to examine
+ * @param[in]     State  access to call back routine
+ * @param[in]     Nb     this northbridge
+ *
+ * @retval        TRUE   the Link is not connected or has hard error
+ * @retval        FALSE  the Link is connected
+ */
+BOOLEAN
+ReadTrueLinkFailStatus (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32    Before;
+  UINT32    After;
+  UINT32    Unconnected;
+  UINT32    Crc;
+  PCI_ADDR  Reg;
+
+  ASSERT ((Node < MAX_NODES) && (Link < Nb->MaxLinks));
+
+  Reg = Nb->MakeLinkBase (Node, Link, Nb);
+  Reg.Address.Register +=  HTHOST_LINK_CONTROL_REG;
+
+  // Save the CRC status before doing anything else.
+  // Read, Clear, re-read the error bits in the Link Control Register
+  // (FN0_84/A4/C4[4] = LinkFail bit),
+  // and check the connection status, TransOff and EndOfChain.
+  //
+  LibAmdPciReadBits (Reg, 9, 8, &Crc, Nb->ConfigHandle);
+  LibAmdPciReadBits (Reg, 4, 4, &Before, Nb->ConfigHandle);
+  State->HtFeatures->SetHtControlRegisterBits (Reg, 4, 4, &Before, State);
+  LibAmdPciReadBits (Reg, 4, 4, &After, Nb->ConfigHandle);
+  LibAmdPciReadBits (Reg, 7, 6, &Unconnected, Nb->ConfigHandle);
+
+  if (Before != After) {
+    if (Unconnected == 0) {
+      if (Crc != 0) {
+        // A sync flood occurred due to HT CRC
+        // Pass the Node and Link on which the generic sync flood event occurred.
+        NotifyAlertHwHtCrc (Node, Link, (UINT8)Crc, State);
+      } else {
+        // Some sync flood occurred
+        // Pass the Node and Link on which the generic sync flood event occurred.
+        NotifyAlertHwSyncFlood (Node, Link, State);
+      }
+    }
+  }
+  return (BOOLEAN) ((After != 0) || (Unconnected != 0));
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write the total number of cores and Nodes to the Node
+ *
+ * @HtNbMethod{::F_SET_TOTAL_NODES_AND_CORES}
+ *
+ * @param[in]     Node         the Node that will be examined
+ * @param[in]     TotalNodes   the total number of Nodes
+ * @param[in]     TotalCores   the total number of cores
+ * @param[in]     Nb           this northbridge
+ */
+VOID
+SetTotalNodesAndCores (
+  IN       UINT8       Node,
+  IN       UINT8       TotalNodes,
+  IN       UINT8       TotalCores,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR NodeIDReg;
+  UINT32 Temp;
+
+  ASSERT ((Node < MAX_NODES) && (TotalNodes <= MAX_NODES));
+  NodeIDReg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                       MakePciBusFromNode (Node),
+                                       MakePciDeviceFromNode (Node),
+                                       CPU_HTNB_FUNC_00,
+                                       REG_NODE_ID_0X60);
+
+  Temp = ((TotalCores - 1) & HTREG_NODE_CPUCNT_4_0);
+  LibAmdPciWriteBits (NodeIDReg, 20, 16, &Temp, Nb->ConfigHandle);
+  Temp = TotalNodes - 1;
+  LibAmdPciWriteBits (NodeIDReg,  6,  4, &Temp, Nb->ConfigHandle);
+
+  NodeIDReg.Address.Register = REG_HT_EXTENDED_NODE_ID_F0X160;
+
+  Temp = (((TotalCores - 1) & HTREG_EXTNODE_CPUCNT_7_5) >> 5);
+  LibAmdPciWriteBits (NodeIDReg, 18, 16, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the Count (1 based) of Nodes in the system.
+ *
+ * @HtNbMethod{::F_GET_NODE_COUNT}
+ *
+ * This is intended to support AP Core HT init, since the Discovery State data is not
+ * available (State->NodesDiscovered), there needs to be this way to find the number
+ * of Nodes.  The Node count can be read from the BSP.
+ *
+ * @param[in]     Nb           this northbridge
+ *
+ * @return        The number of nodes
+ */
+UINT8
+GetNodeCount (
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  PCI_ADDR NodeIDReg;
+  UINT32 Temp;
+
+  NodeIDReg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (0),
+                                       MakePciBusFromNode (0),
+                                       MakePciDeviceFromNode (0),
+                                       CPU_HTNB_FUNC_00,
+                                       REG_NODE_ID_0X60);
+  LibAmdPciReadBits (NodeIDReg,  6,  4, &Temp, Nb->ConfigHandle);
+  return ((UINT8) (++Temp));
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Limit coherent config accesses to cpus as indicated by Nodecnt.
+ *
+ * @HtNbMethod{::F_LIMIT_NODES}
+ *
+ * @param[in]     Node    the Node that will be examined
+ * @param[in]     Nb      this northbridge
+ */
+VOID
+LimitNodes (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT32 Temp;
+  PCI_ADDR Reg;
+
+  Temp = 1;
+  ASSERT ((Node < MAX_NODES));
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_HTNB_FUNC_00,
+                                 REG_LINK_TRANS_CONTROL_0X68);
+  LibAmdPciWriteBits (Reg, 15, 15, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the Package Link number, given the node and real link number.
+ *
+ * @HtNbMethod{::F_GET_PACKAGE_LINK}
+ *
+ * Based on the link to package link mapping from BKDG, look up package link for
+ * the input link on the internal node number corresponding to Node id.
+ *
+ * @param[in]   Node       the node which has this link
+ * @param[in]   Link       the link on that node
+ * @param[in]   Nb         this northbridge
+ *
+ * @return      the Package Link, HT_LIST_TERMINAL Not connected in package, HT_LIST_MATCH_INTERNAL_LINK package internal link.
+ *
+ */
+UINT8
+GetPackageLink (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT8 ModuleType;
+  UINT8 Module;
+  UINTN PackageLinkMapItem;
+  UINT8 PackageLink;
+
+  ASSERT ((Node < MAX_NODES) && (Link < Nb->MaxLinks));
+  PackageLink = HT_LIST_TERMINAL;
+
+  Nb->GetModuleInfo (Node, &ModuleType, &Module, Nb);
+
+  if (ModuleType != 0) {
+    ASSERT (Nb->PackageLinkMap != NULL);
+    // Use table to find this module's package link
+    PackageLinkMapItem = 0;
+    while ((*Nb->PackageLinkMap)[PackageLinkMapItem].Link != HT_LIST_TERMINAL) {
+      if (((*Nb->PackageLinkMap)[PackageLinkMapItem].Module == Module) &&
+          ((*Nb->PackageLinkMap)[PackageLinkMapItem].Link == Link)) {
+        PackageLink = (*Nb->PackageLinkMap)[PackageLinkMapItem].PackageLink;
+        break;
+      }
+      PackageLinkMapItem++;
+    }
+  } else {
+    PackageLink = Link;
+  }
+  return PackageLink;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbUtilities.h b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbUtilities.h
new file mode 100644
index 0000000000..aca80ec9ef
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/NbCommon/htNbUtilities.h
@@ -0,0 +1,108 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge utility routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/**
+ * Return the HT Host capability base PCI config address for a Link.
+ *
+ */
+PCI_ADDR
+MakeLinkBase (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Return the LinkFailed status AFTER an attempt is made to clear the bit.
+ *
+ */
+BOOLEAN
+ReadTrueLinkFailStatus (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Write the total number of cores and Nodes to the Node
+ *
+ */
+VOID
+SetTotalNodesAndCores (
+  IN       UINT8       Node,
+  IN       UINT8       TotalNodes,
+  IN       UINT8       TotalCores,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Get the Count (1 based) of Nodes in the system.
+ *
+ */
+UINT8
+GetNodeCount (
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Limit coherent config accesses to cpus as indicated by Nodecnt.
+ *
+ */
+VOID
+LimitNodes (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/**
+ * Get the Package Link number, given the node and real link number.
+ *
+ */
+UINT8
+GetPackageLink (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htFeat.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htFeat.c
new file mode 100644
index 0000000000..1ff0d66194
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htFeat.c
@@ -0,0 +1,112 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HyperTransport features constructor.
+ *
+ * Initialize the set of available features.
+ * This file implements build options using conditional compilation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionsHt.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "CommonReturns.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_HTFEAT_FILECODE
+extern CONST OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+/**
+ * A no features Initializer.
+ */
+CONST HT_FEATURES ROMDATA HtFeaturesNone =
+{
+  (PF_COHERENT_DISCOVERY)CommonVoid,
+  (PF_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES)CommonVoid,
+  (PF_MAKE_HOP_COUNT_TABLE)CommonVoid,
+  (PF_PROCESS_LINK)CommonVoid,
+  (PF_GATHER_LINK_DATA)CommonVoid,
+  (PF_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY)CommonVoid,
+  (PF_REGANG_LINKS)CommonVoid,
+  (PF_SUBLINK_RATIO_FIXUP)CommonVoid,
+  (PF_IS_COHERENT_RETRY_FIXUP)CommonReturnFalse,
+  (PF_SET_LINK_DATA)CommonVoid,
+  (PF_TRAFFIC_DISTRIBUTION)CommonVoid,
+  (PF_SET_HT_CONTROL_REGISTER_BITS)CommonVoid,
+  (PF_CONVERT_WIDTH_TO_BITS)CommonReturnZero8
+};
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Provide the current Feature set implementation.
+ *
+ * Initialize using the installed initializer.
+ *
+ * @param[in]   HtFeatures      A feature object to initialize
+ * @param[in]   StdHeader       Opaque handle to standard config header
+*/
+VOID
+NewHtFeatures (
+     OUT   HT_FEATURES         *HtFeatures,
+  IN       AMD_CONFIG_PARAMS   *StdHeader
+  )
+{
+  LibAmdMemCopy (
+    (VOID *) HtFeatures,
+    (VOID *) OptionHtConfiguration.HtOptionInternalFeatures ,
+    (UINT32) (sizeof (HT_FEATURES)),
+    StdHeader
+    );
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htFeat.h b/src/vendorcode/amd/agesa/f15/Proc/HT/htFeat.h
new file mode 100644
index 0000000000..61898c013c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htFeat.h
@@ -0,0 +1,562 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HT Features.
+ *
+ * This file provides definitions used in common by HT internal modules.  The
+ * data is private and not for external client access.
+ * Definitions include the HT global internal state data structures, and
+ * access to the available HT features from the main HT entry point.
+ *
+ * This file includes the feature constructor and feature support which is not
+ * removed with various build options.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $        @e  \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_FEAT_H_
+#define _HT_FEAT_H_
+
+/**
+ * @page htimplfeat HT Features Implementation Guide
+ *
+ * HT Features provides access to the HT Feature set, in a manner that isolates
+ * calling code from knowledge about the Feature set implementation or which
+ * features are supported in the current build.  In the case of feature sets, this
+ * is mostly used for build options to reduce code size by removing unneeded features.
+ *
+ * @par Adding a Method to HT Features
+ *
+ * To add a new method to the HT Features, follow these steps.
+ * <ul>
+ * <li> Create a typedef for the Method with the correct parameters and return type.
+ *
+ *   <ul>
+ *   <li> Name the method typedef (F_METHOD_NAME)(), where METHOD_NAME is the same name as the method table item,
+ *     but with "_"'s and UPPERCASE, rather than mixed case.
+ *     @n <tt> typedef VOID (F_METHOD_NAME)(); </tt> @n
+ *
+ *   <li> Make a reference type for references to a method implementation:
+ *     @n <tt> /// Reference to a Method              </tt>
+ *     @n <tt> typedef F_METHOD_NAME *PF_METHOD_NAME </tt> @n
+ *   </ul>
+ *
+ * <li> Provide a standard doxygen function preamble for the Method typedef. Begin the
+ *   detailed description by providing a reference to the method instances page by including
+ *   the lines below:
+ *   @code
+ *   *
+ *   * @HtFeatInstances.
+ *   *
+ *   @endcode
+ *   @note It is important to provide documentation for the method type, because the method may not
+ *   have an implementation in any families supported by the current package. @n
+ *
+ * <li> Add to the _HT_FEATURES struct an item for the Method:
+ *   @n <tt>  PF_METHOD_NAME MethodName; ///< Method: description. </tt> @n
+ * </ul>
+ *
+ * @par Implementing an HT Features Instance of the method.
+ *
+ * To implement an instance of a method for a specific feature follow these steps.
+ *
+ * - In appropriate files, implement the method with the return type and parameters
+ * matching the method typedef.
+ *
+ * - Name the function MethodName().
+ *
+ * - Create a doxygen function preamble for the method instance.  Begin the detailed description with
+ *   an Implements command to reference the method type and add this instance to the Method Instances page.
+ *   @code
+ *   *
+ *   *  @HtFeatMethod{::F_METHOD_NAME}.
+ *   *
+ *   @endcode
+ *
+ * - To access other Ht feature routines or data as part of the method implementation, the function
+ *   must use HtFeatures->OtherMethod().  Do not directly access other HT feature
+ *   routines, because in the table there may be overrides or this routine may be shared by multiple configurations.
+ *
+ * - Add the instance to the HT_FEATURES instances.
+ *
+ * - If a configuration does not need an instance of the method use one of the CommonReturns from
+ *   CommonReturns.h with the same return type.
+ *
+ * @par Invoking HT Features Methods.
+ *
+ * The first step is carried out only once by the top level HT entry point.
+ * @n @code
+ * HT_FEATURES HtFeatures;
+ *   // Get the current HT Feature Set
+ *   NewHtFeatures (&HtFeatures);
+ *   State->HtFeatures = &HtFeatures;
+ * @endcode
+ *
+ * The following example shows how to invoke a HT Features method.
+ * @n @code
+ *    State->HtFeatures->MethodName ();
+ * @endcode
+ *
+ */
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define MAX_PLATFORM_LINKS 64
+#define MAX_LINK_PAIRS 4
+
+/* These following are internal definitions */
+#define ROUTE_TO_SELF 0x0F
+#define INVALID_LINK 0xCC     /* Used in port list data structure to mark unused data entries.
+                                 Can also be used for no Link found in a port list search */
+
+/* definitions for working with the port list structure */
+#define PORTLIST_TYPE_CPU 0
+#define PORTLIST_TYPE_IO  1
+
+/*
+ * Hypertransport Capability definitions and macros
+ *
+ */
+
+#define HT_INTERFACE_CAP_SUBTYPE_MASK        ((UINT32)0xE00000FF)
+#define HT_CAP_SUBTYPE_MASK                  ((UINT32)0xF80000FF)
+
+/* HT Host Capability */
+#define HT_HOST_CAPABILITY                    1
+#define HT_HOST_CAP_SIZE                      0x20
+
+/* Host CapabilityRegisters */
+#define HTHOST_LINK_CAPABILITY_REG            0x00
+#define HTHOST_LINK_CONTROL_REG               0x04
+#define HTHOST_FREQ_REV_REG                   0x08
+#define HTHOST_REV_REV3                       0x60
+#define HTHOST_FEATURE_CAP_REG                0x0C
+#define HTHOST_BUFFER_COUNT_REG               0x10
+#define HTHOST_ISOC_REG                       0x14
+#define HTHOST_LINK_TYPE_REG                  0x18
+#define HTHOST_FREQ_EXTENSION                 0x1C
+#define HTHOST_TYPE_COHERENT                  3
+#define HTHOST_TYPE_NONCOHERENT               7
+#define HTHOST_TYPE_MASK                      0x1F
+
+/* HT Slave Capability (HT1 compat) */
+#define HT_SLAVE_CAPABILITY                   0
+#define HTSLAVE_LINK01_OFFSET                 4
+#define HTSLAVE_LINK_CONTROL_0_REG            4
+#define HTSLAVE_FREQ_REV_0_REG                0xC
+#define HTSLAVE_FEATURECAP_REG                0x10
+#define HT_CONTROL_CLEAR_CRC                  (~(3 << 8))
+#define HT_FREQUENCY_CLEAR_LINK_ERRORS        (~(0x7 << 12))
+#define MAX_BUID                              31
+
+/* HT3 gen Capability */
+#define HT_GEN3_CAPABILITY                    (0xD << 1)
+#define HTGEN3_LINK01_OFFSET                  0x10
+#define HTGEN3_LINK_TRAINING_0_REG            0x10
+
+/* HT3 Retry Capability */
+#define HT_RETRY_CAPABILITY                   (0xC << 1)
+#define HTRETRY_CONTROL_REG                   4
+
+/* Unit ID Clumping Capability */
+#define HT_UNITID_CAPABILITY                  (0x9 << 1)
+#define HTUNIT_SUPPORT_REG                    4
+#define HTUNIT_ENABLE_REG                     8
+#define HT_CLUMPING_PASSIVE                   1
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+// Forward declarations.
+/// Used for forward reference.
+typedef struct _NORTHBRIDGE NORTHBRIDGE;
+/// Used for forward reference.
+typedef struct _HT_FEATURES HT_FEATURES;
+/// Used for forward reference.
+typedef struct _HT_INTERFACE HT_INTERFACE;
+
+/**
+ * Coherent Init Data.
+ *
+ * Metrics representing the coherent fabric which was discovered:  Degree of nodes, adjacency,
+ * node numbering permutations, and the topology which it matched.
+ */
+typedef struct {
+  /** The number of coherent Links connected on each Node (the 'Degree' of the Node) */
+  UINT8 SysDegree[MAX_NODES];
+  /** The systems adjacency (sysMatrix[i][j] is true if Node_i has a Link to Node_j) */
+  BOOLEAN SysMatrix[MAX_NODES][MAX_NODES];
+
+  UINT8 DbDegree[MAX_NODES];               /**< Like sysDegree, but for the current database topology */
+  BOOLEAN DbMatrix[MAX_NODES][MAX_NODES];  /**< Like sysMatrix, but for the current database topology */
+
+  UINT8 Perm[MAX_NODES];           /**< The Node mapping from the system to the database */
+  UINT8 ReversePerm[MAX_NODES];    /**< The Node mapping from the database to the system */
+  UINT8 *MatchedTopology;          /**< The topology that matched the current system or NULL */
+} COHERENT_FABRIC;
+
+/**
+ * Represent the system as Links of matched port pairs.
+ * A pair consists of a source Node, a Link to the destination Node, the
+ * destination Node, and its Link back to source Node.  The even indices are
+ * the source Nodes and Links, and the odd indices are for the destination
+ * Nodes and Links.
+ * @note The Port pair 2*N and 2*N+1 are connected together to form a Link
+ * (e.g. 0,1 and 8,9 are ports on either end of an HT Link) The lower number
+ * port (2*N) is the source port.  The device that owns the source port is
+ * always the device closer to the BSP. (i.e. nearer the CPU in a
+ * non-coherent chain, or the CPU with the lower NodeID).
+ */
+typedef struct {
+  /* This section is where the Link is in the system and how to find it */
+  UINT8 Type;              /**< 0 = CPU, 1 = Device, all others reserved */
+  UINT8 Link;              /**< 0-1 for devices, 0-7 for CPUs */
+  UINT8 NodeID;            /**< The Node, or a pointer to the devices parent Node */
+  UINT8 HostLink;          /**< For Devices, the root CPU's Link to the chain */
+  UINT8 HostDepth;         /**< Link Depth in chain, only used by devices */
+  PCI_ADDR Pointer;        /**< A pointer to the device's slave HT capability, so we don't have to keep searching */
+
+  /* This section is for the final settings, which are written to hardware */
+  BOOLEAN SelRegang;          /**< Indicates to software regang Link, only used for CPU->CPU Links */
+  UINT8 SelWidthIn;           /**< Width in setting */
+  UINT8 SelWidthOut;          /**< Width out setting */
+  UINT8 SelFrequency;         /**< Frequency setting */
+
+  /* This section is for keeping track of capabilities and possible configurations */
+  BOOLEAN RegangCap;            /**< Is the port capable of reganging? CPUs only */
+  UINT32 PrvFrequencyCap;       /**< Possible frequency settings */
+  UINT8 PrvWidthInCap;          /**< Possible Width setting */
+  UINT8 PrvWidthOutCap;         /**< Possible Width setting */
+  UINT32 CompositeFrequencyCap; /**< Possible Link frequency setting */
+  UINT32 ClumpingSupport;       /**< Unit ID Clumping value (bit 0 = passive support) */
+} PORT_DESCRIPTOR;
+
+/// Reference to a set of PORT_DESCRIPTORs.
+typedef PORT_DESCRIPTOR (*PORT_LIST)[MAX_PLATFORM_LINKS*2];
+
+/**
+ * Our global state data structure
+ */
+typedef struct {
+  AMD_HT_INTERFACE *HtBlock;  /**< The input data structure. */
+
+  UINT8 NodesDiscovered;      /**< One less than the number of Nodes found in the system */
+  UINT8 TotalLinks;           /**< How many HT Links have we discovered so far. */
+  UINT8 SysMpCap;             /**< The maximum number of Nodes that all processors are capable of */
+  AGESA_STATUS MaxEventClass; /**< The event class of the highest severity event generated */
+
+  PORT_LIST PortList;         /**< Represent the system as a set of Links, each two Ports. */
+  COHERENT_FABRIC *Fabric;                        /**< Describe metrics about the coherent fabric.
+                                                   * Limited scope to CoherentInit().  */
+  /* Data interface to other Agesa Modules */
+  SOCKET_DIE_TO_NODE_MAP SocketDieToNodeMap;      /**< For each Socket, Die the Node ids */
+  NODE_TO_SOCKET_DIE_MAP NodeToSocketDieMap;      /**< For each Node id, Socket and Die */
+  HOP_COUNT_TABLE *HopCountTable;                 /**< Table of hops between nodes */
+
+  /* Data for non-coherent initialization */
+  UINT8 AutoBusCurrent;                      /**< The next bus number available */
+  UINT8 UsedCfgMapEntries;                   /**< The next Config address Map set available, Limit 4 (F1X[EC:E0]) */
+  BOOLEAN IsUsingRecoveryHt;                 /**< Manual BUID Swap List processing should assume that HT Recovery was used */
+  BOOLEAN IsSetHtCrcFlood;                   /**< Enable setting of HT CRC Flood */
+  BOOLEAN IsUsingUnitIdClumping;             /**< Enable automatic Unit Id Clumping configuration. */
+
+  HT_INTERFACE *HtInterface;   /**< Interface for feature code to external parameters */
+  HT_FEATURES *HtFeatures;     /**< The current feature implementations */
+  NORTHBRIDGE *Nb;             /**< The current northbridge */
+
+  PLATFORM_CONFIGURATION *PlatformConfiguration;     /**< The platform specific configuration customizations */
+  VOID *ConfigHandle;          /**< Config Pointer, opaque handle for passing to lib */
+} STATE_DATA;
+
+//
+// Feature Method types
+//
+
+/**
+ * Discover all coherent devices in the system.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out] State     our global state
+ *
+ */
+typedef VOID F_COHERENT_DISCOVERY (
+  IN OUT   STATE_DATA *State
+  );
+/// Reference to a method.
+typedef F_COHERENT_DISCOVERY *PF_COHERENT_DISCOVERY;
+
+/**
+ * Using the description of the fabric topology we discovered, try to find a match
+ * among the supported topologies.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out]    State    the discovered fabric, degree matrix, permutation
+ *
+ */
+typedef VOID F_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES (
+  IN OUT   STATE_DATA    *State
+  );
+/// Reference to a method.
+typedef F_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES *PF_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES;
+
+/**
+ * Make a Hop Count Table for the installed topology.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out]   State    access topology, permutation, update hop table
+ *
+ */
+typedef VOID F_MAKE_HOP_COUNT_TABLE (
+  IN OUT   STATE_DATA    *State
+  );
+/// Reference to a method.
+typedef F_MAKE_HOP_COUNT_TABLE *PF_MAKE_HOP_COUNT_TABLE;
+
+/**
+ * Process a non-coherent Link.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in]     Node          Node on which to process nc init
+ * @param[in]     Link          The non-coherent Link on that Node
+ * @param[in]     IsCompatChain Is this the chain with the southbridge? TRUE if yes.
+ * @param[in,out] State         our global state
+ */
+typedef VOID F_PROCESS_LINK (
+  IN       UINT8         Node,
+  IN       UINT8         Link,
+  IN       BOOLEAN       IsCompatChain,
+  IN OUT   STATE_DATA    *State
+  );
+/// Reference to a method.
+typedef F_PROCESS_LINK *PF_PROCESS_LINK;
+
+/**
+ * Get Link features into system data structure.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in]     State our global state, port list
+ */
+typedef VOID F_GATHER_LINK_DATA (
+  IN       STATE_DATA   *State
+  );
+/// Reference to a method.
+typedef F_GATHER_LINK_DATA *PF_GATHER_LINK_DATA;
+
+/**
+ * Optimize Links.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out]    State         Process and update portlist
+ */
+typedef VOID F_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY (
+  IN OUT   STATE_DATA   *State
+  );
+/// Reference to a method.
+typedef F_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY *PF_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY;
+
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in]     State   our global state, port list
+ */
+typedef VOID F_SET_LINK_DATA (
+  IN       STATE_DATA   *State
+  );
+/// Reference to a method.
+typedef F_SET_LINK_DATA *PF_SET_LINK_DATA;
+
+/**
+ * Retry must be enabled on all coherent links if it is enabled on any coherent links.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out]   State       global state, port frequency settings.
+ *
+ * @retval          TRUE        Fixup occurred, all coherent links HT1
+ * @retval          FALSE       No changes
+ */
+typedef BOOLEAN F_IS_COHERENT_RETRY_FIXUP (
+  IN       STATE_DATA       *State
+  );
+/// Reference to a method.
+typedef F_IS_COHERENT_RETRY_FIXUP *PF_IS_COHERENT_RETRY_FIXUP;
+
+
+/**
+ * Test the subLinks of a Link to see if they qualify to be reganged.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out] State          Our global state
+ */
+typedef VOID F_REGANG_LINKS (
+  IN OUT   STATE_DATA *State
+  );
+/// Reference to a method.
+typedef F_REGANG_LINKS *PF_REGANG_LINKS;
+
+/**
+ * Iterate through all Links, checking the frequency of each subLink pair.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out]     State     Link state and port list
+ *
+ */
+typedef VOID F_SUBLINK_RATIO_FIXUP (
+  IN OUT   STATE_DATA    *State
+  );
+/// Reference to a method.
+typedef F_SUBLINK_RATIO_FIXUP *PF_SUBLINK_RATIO_FIXUP;
+
+/**
+ * Identify Links which can have traffic distribution.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in]   State   port list data
+ */
+typedef VOID F_TRAFFIC_DISTRIBUTION (
+  IN       STATE_DATA *State
+  );
+/// Reference to a method.
+typedef F_TRAFFIC_DISTRIBUTION *PF_TRAFFIC_DISTRIBUTION;
+
+/**
+ * Access HT Link Control Register.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in]     Reg      the PCI config address the control register
+ * @param[in]     HiBit    the high bit number
+ * @param[in]     LoBit    the low bit number
+ * @param[in]     Value    the value to write to that bit range. Bit 0 => loBit.
+ * @param[in]     State    Our state, config handle for lib
+ */
+typedef VOID F_SET_HT_CONTROL_REGISTER_BITS (
+  IN       PCI_ADDR    Reg,
+  IN       UINT8       HiBit,
+  IN       UINT8       LoBit,
+  IN       UINT32      *Value,
+  IN       STATE_DATA  *State
+  );
+/// Reference to a method.
+typedef F_SET_HT_CONTROL_REGISTER_BITS *PF_SET_HT_CONTROL_REGISTER_BITS;
+
+/**
+ * Translate a desired width setting to the bits to set in the register field.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in]     Value   the width Value
+ *
+ * @return The bits for the register
+ */
+typedef UINT8 F_CONVERT_WIDTH_TO_BITS (
+  IN       UINT8       Value
+  );
+/// Reference to a method.
+typedef F_CONVERT_WIDTH_TO_BITS *PF_CONVERT_WIDTH_TO_BITS;
+
+/**
+ * HT Feature Methods.
+ *
+ * Provides abstract methods which are bound to specific feature implementations.
+ */
+struct _HT_FEATURES {
+  PF_COHERENT_DISCOVERY CoherentDiscovery;    /**< Method: Coherent Discovery. */
+  PF_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES LookupComputeAndLoadRoutingTables;
+                                              /**< Method: Route the discovered system */
+  PF_MAKE_HOP_COUNT_TABLE MakeHopCountTable;  /**< Method: Compute slit hop counts */
+  PF_PROCESS_LINK ProcessLink;                /**< Method: Process a non-coherent Link. */
+  PF_GATHER_LINK_DATA GatherLinkData;         /**< Method: Gather Link Capabilities and data. */
+  PF_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY SelectOptimalWidthAndFrequency;
+                                              /**< Method: Optimize link features. */
+  PF_REGANG_LINKS RegangLinks;                /**< Method: Regang Sublinks. */
+  PF_SUBLINK_RATIO_FIXUP SubLinkRatioFixup;   /**< Method: Fix Sublink Frequency ratios */
+  PF_IS_COHERENT_RETRY_FIXUP IsCoherentRetryFixup;
+                                              /**< Method: Fix Retry mixed on coherent links. */
+  PF_SET_LINK_DATA SetLinkData;               /**< Method: Set optimized values. */
+  PF_TRAFFIC_DISTRIBUTION TrafficDistribution; /**< Method: Detect and Initialize Traffic Distribution */
+  PF_SET_HT_CONTROL_REGISTER_BITS SetHtControlRegisterBits; /**< Method: Access HT Link Control Reg. */
+  PF_CONVERT_WIDTH_TO_BITS ConvertWidthToBits; /**< Method: Convert a bit width to the value used for register setting. */
+} ;
+
+/*----------------------------------------------------------------------------
+ *                         Prototypes
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Provide the current Feature set implementation.
+ *
+ * Add an implementation reference for the constructor, just to make sure the page is created.
+ * @HtFeatMethod{_HT_FEATURES}.
+ *
+ */
+VOID
+NewHtFeatures (
+     OUT   HT_FEATURES          *HtFeatures,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+
+#endif  /* _HT_FEAT_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph.h b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph.h
new file mode 100644
index 0000000000..1dd474830c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph.h
@@ -0,0 +1,144 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Topology Interface.
+ *
+ * Contains interface to the topology data.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _HT_GRAPH_H_
+#define _HT_GRAPH_H_
+
+/**
+ * @page htgraphdesign Graph Support routines
+ *
+ * These routines provide support for dealing with the graph representation
+ * of the topologies, along with the routing table information for that topology.
+ * The routing information is compressed and these routines currently decompress
+ * 'on the fly'.  A graph is represented as a set of routes. All the edges in the
+ * graph are routes; a direct route from Node i to Node j exists in the graph IFF
+ * there is an edge directly connecting Node i to Node j.  All other routes designate
+ * the edge which the route to that Node initially takes, by designating a Node
+ * to which a direct connection exists.  That is, the route to non-adjacent Node j
+ * from Node i specifies Node k where Node i directly connects to Node k.
+ *
+ *@code
+ * pseudo definition of compressed graph:
+ * typedef struct
+ * {
+ *     // First byte
+ *     UINT8 broadcast[8]:1;   // that is, 8 1-bit values
+ *     // Second byte
+ *     UINT8 requestRoute:4;   // [3:0]
+ *     UINT8 responseRoute:4;  // [7:4]
+ * } sRoute;
+ * typedef struct
+ * {
+ *     UINT8 size;
+ *     sRoute graph[size][size];
+ * } sGraph;
+ *@endcode
+ */
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+GetAmdTopolist (
+  OUT   UINT8    ***List
+  );
+
+UINT8
+GraphHowManyNodes (
+  IN       UINT8    *Graph
+  );
+
+BOOLEAN
+GraphIsAdjacent (
+  IN       UINT8    *Graph,
+  IN       UINT8    NodeA,
+  IN       UINT8    NodeB
+  );
+
+UINT8
+GraphGetRsp (
+  IN       UINT8    *Graph,
+  IN       UINT8    NodeA,
+  IN       UINT8    NodeB
+  );
+
+UINT8
+GraphGetReq (
+  IN       UINT8    *Graph,
+  IN       UINT8    NodeA,
+  IN       UINT8    NodeB
+  );
+
+UINT8
+GraphGetBc (
+  IN       UINT8    *Graph,
+  IN       UINT8    NodeA,
+  IN       UINT8    NodeB
+  );
+
+#endif  /* _HT_GRAPH_H_ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph.c
new file mode 100644
index 0000000000..1b9b0947b4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph.c
@@ -0,0 +1,199 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Routines to deal with topology data.
+ *
+ * Access the topologies and information about a topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "htGraph.h"
+#include "OptionsHt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_HTGRAPH_HTGRAPH_FILECODE
+
+extern OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Returns the AGESA built in topology list
+ *
+ * @param[out]    List    a pointer to the built in topology list
+ */
+VOID
+GetAmdTopolist (
+  OUT   UINT8    ***List
+  )
+{
+  // Cast below to hush CONST warning. The built in list must be CONST to be in ROM statically.
+  // The caller of this routine may get a topolist pointer from the interface, however, and
+  // that is not CONST, since it could be on the stack.
+  //
+  *List = (UINT8 **)OptionHtConfiguration.HtOptionBuiltinTopologies;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Returns the number of Nodes in the compressed graph
+ *
+ * @param[in]     Graph   a compressed graph
+ *
+ * @return the number of Nodes in the graph
+ */
+UINT8
+GraphHowManyNodes (
+  IN       UINT8    *Graph
+  )
+{
+  return Graph[0];
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Returns true if NodeA is directly connected to NodeB, false otherwise
+ *
+ * if NodeA == NodeB also returns false.
+ * Relies on rule that directly connected Nodes always route requests directly.
+ *
+ * @param[in]     Graph   the graph to examine
+ * @param[in]     NodeA   the Node number of the first Node
+ * @param[in]     NodeB   the Node number of the second Node
+ *
+ * @retval        TRUE    NodeA connects to NodeB
+ * @retval        FALSE   NodeA does not connect to NodeB
+ */
+BOOLEAN
+GraphIsAdjacent (
+  IN       UINT8    *Graph,
+  IN       UINT8    NodeA,
+  IN       UINT8    NodeB
+  )
+{
+  UINT8 size;
+  size = Graph[0];
+  ASSERT ((NodeA < size) && (NodeB < size));
+  return (Graph[1 + (NodeA*size + NodeB)*2 + 1] & 0x0F) == NodeB;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Returns the graph Node used by NodeA to route responses targeted at NodeB.
+ *
+ *     This will be a Node directly connected to NodeA (possibly NodeB itself),
+ *     or "Route to Self" if NodeA and NodeB are the same Node.
+ *     Note that all Node numbers are abstract Node numbers of the topology graph,
+ *     it is the responsibility of the caller to apply any permutation needed.
+ *
+ * @param[in]     Graph the graph to examine
+ * @param[in]     NodeA the Node number of the first Node
+ * @param[in]     NodeB  the Node number of the second Node
+ *
+ * @return The response route Node
+ */
+UINT8
+GraphGetRsp (
+  IN       UINT8    *Graph,
+  IN       UINT8    NodeA,
+  IN       UINT8    NodeB
+  )
+{
+  UINT8 size;
+  size = Graph[0];
+  ASSERT ((NodeA < size) && (NodeB < size));
+  return (Graph[1 + (NodeA*size + NodeB)*2 + 1] & 0xF0) >> 4;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Returns the graph Node used by NodeA to route requests targeted at NodeB.
+ *
+ *     This will be a Node directly connected to NodeA (possibly NodeB itself),
+ *     or "Route to Self" if NodeA and NodeB are the same Node.
+ *     Note that all Node numbers are abstract Node numbers of the topology graph,
+ *     it is the responsibility of the caller to apply any permutation needed.
+ *
+ * @param[in]     Graph the graph to examine
+ * @param[in]     NodeA the Node number of the first Node
+ * @param[in]     NodeB the Node number of the second Node
+ *
+ * @return The request route Node
+ */
+UINT8
+GraphGetReq (
+  IN       UINT8    *Graph,
+  IN       UINT8    NodeA,
+  IN       UINT8    NodeB
+  )
+{
+  UINT8 size;
+  size = Graph[0];
+  ASSERT ((NodeA < size) && (NodeB < size));
+  return (Graph[1 + (NodeA*size + NodeB)*2 + 1] & 0x0F);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Returns a bit vector of Nodes that NodeA should forward a broadcast from
+ * NodeB towards
+ *
+ * @param[in]     Graph the graph to examine
+ * @param[in]     NodeA the Node number of the first Node
+ * @param[in]     NodeB the Node number of the second Node
+ *
+ * @return the broadcast routes for NodeA from NodeB
+ */
+UINT8
+GraphGetBc (
+  IN       UINT8    *Graph,
+  IN       UINT8    NodeA,
+  IN       UINT8    NodeB
+  )
+{
+  UINT8 size;
+  size = Graph[0];
+  ASSERT ((NodeA < size) && (NodeB < size));
+  return Graph[1 + (NodeA*size + NodeB)*2];
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph1.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph1.c
new file mode 100644
index 0000000000..eaed064ddc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph1.c
@@ -0,0 +1,70 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Single node topology
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*
+ *   0
+ */
+/**
+ * single node
+ */
+/**
+ * @dot
+ strict graph one {
+     node [shape="plaintext"];
+     0;
+     }
+     @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologySingleNode[] =
+{
+  0x01,
+  0x00, 0xFF  // Node 0
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph2.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph2.c
new file mode 100644
index 0000000000..7466564fb8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph2.c
@@ -0,0 +1,71 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Two nodes.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*
+ *    0---1
+ */
+/**
+ * Two Nodes.
+ */
+/**
+ * @dot
+ strict graph two {
+     node [shape="plaintext"];
+     0 -- 1 ;
+     }
+     @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyDualNode[] =
+{
+  0x02,
+  0x02, 0xFF,   0x00, 0x11,  // Node 0
+  0x00, 0x00,   0x01, 0xFF   // Node 1
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph3Line.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph3Line.c
new file mode 100644
index 0000000000..1f6b439a5f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph3Line.c
@@ -0,0 +1,76 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Three Line.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*
+ *   2
+ *   |
+ *   |
+ *   0---1
+ */
+/**
+ * Three Line
+ */
+/**
+ * @dot
+ strict graph three {
+     node [shape="plaintext"];
+     0 -- 1 ;
+     0 -- 2 ;
+     }
+     @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyThreeLine[] =
+{
+  0x03,
+  0x06, 0xFF,  0x04, 0x11,  0x02, 0x22,  // Node 0
+  0x00, 0x00,  0x01, 0xFF,  0x00, 0x00,  // Node 1
+  0x00, 0x00,  0x00, 0x00,  0x01, 0xFF   // Node 2
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph3Triangle.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph3Triangle.c
new file mode 100644
index 0000000000..5a5e01f256
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph3Triangle.c
@@ -0,0 +1,77 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Three Triangle Topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*
+ *   2
+ *   |\
+ *   |  \
+ *   0---1
+ */
+/**
+ * Three triangle
+ */
+/**
+ * @dot
+ strict graph triangle {
+ node [shape="plaintext"];
+ 0 -- 1 ;
+ 0 -- 2 ;
+ 1 -- 2 ;
+ }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyTriangle[] =
+{
+  0x03,
+  0x06, 0xFF,  0x00, 0x11,  0x00, 0x22,  // Node 0
+  0x00, 0x00,  0x05, 0xFF,  0x00, 0x22,  // Node 1
+  0x00, 0x00,  0x00, 0x11,  0x03, 0xFF   // Node 2
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Degenerate.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Degenerate.c
new file mode 100644
index 0000000000..ad0974231b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Degenerate.c
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Four node degenerate.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/*
+ *   2   3
+ *   |\  |
+ *   |  \|
+ *   0---1
+ */
+/**
+ * Four Node degenerate
+ */
+/**
+ * @dot
+   strict graph degen4 {
+     node [shape="plaintext"];
+     {rank=same; 0; 1}
+     {rank=same; 2; 3}
+     0 -- 1 ;
+     0 -- 2 ;
+     1 -- 2 ;
+     1 -- 3 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyFourDegenerate[] =
+{
+  0x04,
+  0x06, 0xFF,   0x00, 0x11,   0x00, 0x22,   0x00, 0x11,  // Node 0
+  0x08, 0x00,   0x0D, 0xFF,   0x08, 0x22,   0x05, 0x33,  // Node 1
+  0x00, 0x00,   0x00, 0x11,   0x03, 0xFF,   0x00, 0x11,  // Node 2
+  0x00, 0x11,   0x00, 0x11,   0x00, 0x11,   0x02, 0xFF   // Node 3
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4FullyConnected.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4FullyConnected.c
new file mode 100644
index 0000000000..41467520b7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4FullyConnected.c
@@ -0,0 +1,83 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Four node fully connected.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*
+ *   2---3
+ *   |\ /|
+ *   |/ \|
+ *   0---1
+ */
+/**
+ * Four Node Fully
+ */
+/**
+ * @dot
+   strict graph full4 {
+     node [shape="plaintext"];
+     {rank=same; 0; 1}
+     {rank=same; 2; 3}
+     0 -- 1 ;
+     0 -- 2 ;
+     0 -- 3 ;
+     1 -- 2 ;
+     1 -- 3 ;
+     2 -- 3 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyFourFully[] =
+{
+  0x04,
+  0x0E, 0xFF,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  // Node 0
+  0x00, 0x00,  0x0D, 0xFF,  0x00, 0x22,  0x00, 0x33,  // Node 1
+  0x00, 0x00,  0x00, 0x11,  0x0B, 0xFF,  0x00, 0x33,  // Node 2
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x07, 0xFF   // Node 3
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Kite.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Kite.c
new file mode 100644
index 0000000000..5f1d3df58c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Kite.c
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Four node kite Topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/*
+ *   2---3
+ *   |\  |
+ *   |  \|
+ *   0---1
+ */
+/**
+ * Four Node kite
+ */
+/**
+ * @dot
+   strict graph kite4 {
+     node [shape="plaintext"];
+     {rank=same; 0; 1}
+     {rank=same; 2; 3}
+     0 -- 1 ;
+     0 -- 2 ;
+     1 -- 2 ;
+     1 -- 3 ;
+     2 -- 3 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyFourKite[] =
+{
+  0x04,
+  0x06, 0xFF,   0x00, 0x11,   0x00, 0x22,   0x00, 0x11,  // Node 0
+  0x08, 0x00,   0x0D, 0xFF,   0x00, 0x22,   0x00, 0x33,  // Node 1
+  0x00, 0x00,   0x00, 0x11,   0x0B, 0xFF,   0x01, 0x33,  // Node 2
+  0x00, 0x22,   0x00, 0x11,   0x00, 0x22,   0x06, 0xFF   // Node 3
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Line.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Line.c
new file mode 100644
index 0000000000..3cc8e59b1f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Line.c
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Four node Line Topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*
+ *   2   3
+ *   |   |
+ *   |   |
+ *   0---1
+ */
+/**
+ * Four Node line
+ */
+/**
+ * @dot
+   strict graph line4 {
+     node [shape="plaintext"];
+     {rank=same; 0; 1}
+     {rank=same; 2; 3}
+     0 -- 1 ;
+     0 -- 2 ;
+     1 -- 3 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyFourLine[] =
+{
+  0x04,
+  0x06, 0xFF,   0x04, 0x11,   0x02, 0x22,   0x04, 0x11,  // Node 0
+  0x08, 0x00,   0x09, 0xFF,   0x08, 0x00,   0x01, 0x33,  // Node 1
+  0x00, 0x00,   0x00, 0x00,   0x01, 0xFF,   0x00, 0x00,  // Node 2
+  0x00, 0x11,   0x00, 0x11,   0x00, 0x11,   0x02, 0xFF   // Node 3
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Square.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Square.c
new file mode 100644
index 0000000000..b17e119d6a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Square.c
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Four node Square Topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/*
+ *   2---3
+ *   |   |
+ *   |   |
+ *   0---1
+ */
+/**
+ * Four Node square
+ */
+/**
+ * @dot
+   strict graph square4 {
+     node [shape="plaintext"];
+     {rank=same; 0; 1}
+     {rank=same; 2; 3}
+     0 -- 1 ;
+     0 -- 2 ;
+     1 -- 3 ;
+     2 -- 3 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyFourSquare[] =
+{
+  0x04,
+  0x06, 0xFF,   0x00, 0x11,   0x02, 0x22,   0x00, 0x22,  // Node 0
+  0x00, 0x00,   0x09, 0xFF,   0x00, 0x33,   0x01, 0x33,  // Node 1
+  0x08, 0x00,   0x00, 0x00,   0x09, 0xFF,   0x00, 0x33,  // Node 2
+  0x00, 0x11,   0x04, 0x11,   0x00, 0x22,   0x06, 0xFF   // Node 3
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Star.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Star.c
new file mode 100644
index 0000000000..ff08bb82fe
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph4Star.c
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Four node Star Topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*
+ *   2---3
+ *   |\
+ *   |  \
+ *   0   1
+ */
+/**
+ * Four Node Star
+ */
+/**
+ * @dot
+   strict graph star4 {
+     node [shape="plaintext"];
+     {rank=same; 0; 1}
+     {rank=same; 2; 3}
+     0 -- 2 ;
+     1 -- 2 ;
+     2 -- 3 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyFourStar[] =
+{
+  0x04,
+  0x04, 0xFF,   0x00, 0x22,   0x00, 0x22,   0x00, 0x22,  // Node 0
+  0x00, 0x22,   0x04, 0xFF,   0x00, 0x22,   0x00, 0x22,  // Node 1
+  0x0A, 0x00,   0x09, 0x11,   0x0B, 0xFF,   0x03, 0x33,  // Node 2
+  0x00, 0x22,   0x00, 0x22,   0x00, 0x22,   0x04, 0xFF   // Node 3
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph5FullyConnected.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph5FullyConnected.c
new file mode 100644
index 0000000000..5b35b90e9c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph5FullyConnected.c
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Five node Fully Connected Topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/**
+ * Five node fully connected
+ */
+/**
+ * @dot
+   strict graph full5 {
+     node [shape="plaintext"];
+     0 -- 1 ;
+     0 -- 2 ;
+     0 -- 3 ;
+     0 -- 4 ;
+     1 -- 2 ;
+     1 -- 3 ;
+     1 -- 4 ;
+     2 -- 3 ;
+     2 -- 4 ;
+     3 -- 4 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyFiveFully[] =
+{
+  0x05,
+  0x1E, 0xFF,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44, // Node 0
+  0x00, 0x00,  0x1D, 0xFF,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44, // Node 1
+  0x00, 0x00,  0x00, 0x11,  0x1B, 0xFF,  0x00, 0x33,  0x00, 0x44, // Node 2
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x17, 0xFF,  0x00, 0x44, // Node 3
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x0F, 0xFF  // Node 4
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph5TwistedLadder.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph5TwistedLadder.c
new file mode 100644
index 0000000000..c0d80b002a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph5TwistedLadder.c
@@ -0,0 +1,89 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Five node pop order twisted ladder Topology.
+ *
+ * The population order fall back to five nodes on a twisted ladder.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*
+ *
+ *  4
+ *  |\
+ *  |  \
+ *  2   3
+ *  |   |
+ *  0---1
+ */
+/**
+ * Five node twisted ladder
+ */
+/**
+ * @dot
+   strict graph twl5 {
+     node [shape="plaintext"];
+     {rank=same; 0; 1}
+     {rank=same; 2; 3}
+     {rank=same; 4}
+     0 -- 1 ;
+     0 -- 2 ;
+     1 -- 3 ;
+     2 -- 4 ;
+     3 -- 4 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyFiveTwistedLadder[] =
+{
+  0x05,
+  0x06, 0xFF,  0x04, 0x11,  0x02, 0x22,  0x00, 0x11,  0x00, 0x22, // Node0
+  0x08, 0x00,  0x09, 0xFF,  0x08, 0x00,  0x01, 0x33,  0x00, 0x30, // Node1
+  0x10, 0x00,  0x10, 0x00,  0x11, 0xFF,  0x00, 0x40,  0x01, 0x44, // Node2
+  0x00, 0x11,  0x00, 0x11,  0x00, 0x14,  0x12, 0xFF,  0x02, 0x44, // Node3
+  0x00, 0x22,  0x00, 0x23,  0x00, 0x22,  0x04, 0x33,  0x0C, 0xFF  // Node4
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6DoubloonLower.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6DoubloonLower.c
new file mode 100644
index 0000000000..0445a71b3c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6DoubloonLower.c
@@ -0,0 +1,75 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Six node hydra Topology using "Doubloon/Drachma", Lower nodes remain.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/**
+ * 6 node hydra doubloon lower nodes, 3 MCM processors.
+ * For partial populations, note nodes are removed in pairs.
+ */
+/**
+ * @dot
+   strict graph doubloon8lower {
+     node [shape="plaintext"];
+     0 -- 1 ;    2 -- 3 ;   4 -- 5 ;
+     0 -- 2 ;    1 -- 2 ;   2 -- 4 ;   3 -- 5 ;
+     0 -- 4 ;    1 -- 5 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologySixDoubloonLower[] =
+{
+  0x06,
+  0x16, 0xFF,  0x00, 0x11,  0x02, 0x22,  0x00, 0x22,  0x02, 0x44,  0x00, 0x44, // Node 0
+  0x00, 0x00,  0x25, 0xFF,  0x00, 0x22,  0x00, 0x22,  0x00, 0x55,  0x01, 0x55, // Node 1
+  0x08, 0x00,  0x08, 0x11,  0x19, 0xFF,  0x03, 0x33,  0x08, 0x44,  0x00, 0x44, // Node 2
+  0x00, 0x22,  0x00, 0x22,  0x00, 0x22,  0x24, 0xFF,  0x00, 0x55,  0x04, 0x55, // Node 3
+  0x20, 0x00,  0x00, 0x00,  0x20, 0x22,  0x00, 0x22,  0x25, 0xFF,  0x00, 0x55, // Node 4
+  0x00, 0x11,  0x10, 0x11,  0x00, 0x33,  0x10, 0x33,  0x00, 0x44,  0x1A, 0xFF, // Node 5
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6DoubloonUpper.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6DoubloonUpper.c
new file mode 100644
index 0000000000..e67923920d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6DoubloonUpper.c
@@ -0,0 +1,75 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Six node hydra Topology using "Doubloon/Drachma", Upper nodes remain.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/**
+ * 6 node hydra drachma, upper nodes remain, 3 MCM processors.
+ * For partial population cases, note that nodes are removed in pairs.
+ */
+/**
+ * @dot
+   strict graph doubloon6upper {
+     node [shape="plaintext"];
+     0 -- 1 ;    2 -- 3 ;   4 -- 5 ;
+     0 -- 2 ;    1 -- 2 ;   2 -- 4 ;   3 -- 5 ;
+     0 -- 4 ;    1 -- 5 ;   2 -- 5 ;   3 -- 4 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologySixDoubloonUpper[] =
+{
+  0x06,
+  0x16, 0xFF,  0x00, 0x11,  0x00, 0x22,  0x00, 0x22,  0x02, 0x44,  0x00, 0x44, // Node 0
+  0x00, 0x00,  0x25, 0xFF,  0x00, 0x22,  0x00, 0x22,  0x00, 0x55,  0x01, 0x55, // Node 1
+  0x08, 0x00,  0x08, 0x11,  0x3B, 0xFF,  0x03, 0x33,  0x00, 0x44,  0x00, 0x55, // Node 2
+  0x00, 0x22,  0x00, 0x22,  0x00, 0x22,  0x34, 0xFF,  0x00, 0x44,  0x00, 0x55, // Node 3
+  0x20, 0x00,  0x00, 0x00,  0x00, 0x22,  0x00, 0x33,  0x2D, 0xFF,  0x00, 0x55, // Node 4
+  0x00, 0x11,  0x10, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x1E, 0xFF, // Node 5
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6FullyConnected.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6FullyConnected.c
new file mode 100644
index 0000000000..5e85b68a2e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6FullyConnected.c
@@ -0,0 +1,86 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Six node Fully Connected Topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/**
+ * 6 node fully connected
+ */
+/**
+ * @dot
+   strict graph full6 {
+     node [shape="plaintext"];
+     0 -- 1 ;
+     0 -- 2 ;
+     0 -- 3 ;
+     0 -- 4 ;
+     0 -- 5 ;
+     1 -- 2 ;
+     1 -- 3 ;
+     1 -- 4 ;
+     1 -- 5 ;
+     2 -- 3 ;
+     2 -- 4 ;
+     2 -- 5 ;
+     3 -- 4 ;
+     3 -- 5 ;
+     4 -- 5 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologySixFully[] =
+{
+  0x06,
+  0x3E, 0xFF,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55, // Node 0
+  0x00, 0x00,  0x3D, 0xFF,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55, // Node 1
+  0x00, 0x00,  0x00, 0x11,  0x3B, 0xFF,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55, // Node 2
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x37, 0xFF,  0x00, 0x44,  0x00, 0x55, // Node 3
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x2F, 0xFF,  0x00, 0x55, // Node 4
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x1F, 0xFF  // Node 5
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6TwinTriangles.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6TwinTriangles.c
new file mode 100644
index 0000000000..b1e4b8bec7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6TwinTriangles.c
@@ -0,0 +1,92 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * A six node Topology of three MCMs.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/* (2 fully connected three ways connected at the 'corners')
+ *
+ *       5
+ *      /| \
+ *     / 1 - 3
+ *    / /    /
+ *   4 /    /
+ *   | \   /
+ *   0 - 2-
+ */
+/**
+ * Six Node hydra
+ */
+/**
+ * @dot
+   strict graph hmcm6 {
+     node [shape="plaintext"];
+     subgraph even {
+     0 -- 2 ;    2 -- 4 ;
+     0 -- 4 ;
+     }
+     subgraph odd {
+     1 -- 3 ;   3 -- 5
+     1 -- 5 ;
+     }
+     {rank=same; 0; 2; 1; 3}
+     {rank=same; 4; 5}
+     0 -- 1 ;    2 -- 3 ;   4 -- 5 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologySixTwinTriangles[] =
+{
+  0x06,
+  0x16, 0xFF,  0x00, 0x11,  0x02, 0x22,  0x00, 0x22,  0x02, 0x44,  0x00, 0x44,  // Node 0
+  0x00, 0x00,  0x29, 0xFF,  0x00, 0x33,  0x01, 0x33,  0x00, 0x55,  0x01, 0x55,  // Node 1
+  0x08, 0x00,  0x00, 0x00,  0x19, 0xFF,  0x00, 0x33,  0x08, 0x44,  0x00, 0x44,  // Node 2
+  0x00, 0x11,  0x04, 0x11,  0x00, 0x22,  0x26, 0xFF,  0x00, 0x55,  0x04, 0x55,  // Node 3
+  0x20, 0x00,  0x00, 0x00,  0x20, 0x22,  0x00, 0x22,  0x25, 0xFF,  0x00, 0x55,  // Node 4
+  0x00, 0x11,  0x10, 0x11,  0x00, 0x33,  0x10, 0x33,  0x00, 0x44,  0x1A, 0xFF,  // Node 5
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6TwistedLadder.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6TwistedLadder.c
new file mode 100644
index 0000000000..5e46065cec
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph6TwistedLadder.c
@@ -0,0 +1,92 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Six node pop order twisted ladder Topology.
+ *
+ * The population order fall back to Six nodes on a twisted ladder.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*
+ *
+ *  4   5
+ *  |\ /|
+ *  |/ \|
+ *  2   3
+ *  |   |
+ *  0---1
+ */
+/**
+ * 6 node twisted ladder
+ */
+/**
+ * @dot
+   strict graph twl6 {
+     node [shape="plaintext"];
+     {rank=same; 0; 1}
+     {rank=same; 2; 3}
+     {rank=same; 4; 5}
+     0 -- 1 ;
+     0 -- 2 ;
+     1 -- 3 ;
+     2 -- 4 ;
+     2 -- 5 ;
+     3 -- 4 ;
+     3 -- 5 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologySixTwistedLadder[] =
+{
+  0x06,
+  0x06, 0xFF,  0x04, 0x11,  0x02, 0x22,  0x00, 0x11,  0x02, 0x22,  0x00, 0x12, // Node0
+  0x08, 0x00,  0x09, 0xFF,  0x00, 0x00,  0x01, 0x33,  0x00, 0x03,  0x01, 0x33, // Node1
+  0x30, 0x00,  0x00, 0x00,  0x31, 0xFF,  0x00, 0x54,  0x21, 0x44,  0x00, 0x55, // Node2
+  0x00, 0x11,  0x30, 0x11,  0x00, 0x45,  0x32, 0xFF,  0x00, 0x44,  0x12, 0x55, // Node3
+  0x00, 0x22,  0x00, 0x32,  0x08, 0x22,  0x00, 0x33,  0x0C, 0xFF,  0x00, 0x32, // Node4
+  0x00, 0x23,  0x00, 0x33,  0x00, 0x22,  0x04, 0x33,  0x00, 0x23,  0x0C, 0xFF  // Node5
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph7FullyConnected.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph7FullyConnected.c
new file mode 100644
index 0000000000..e97b2685de
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph7FullyConnected.c
@@ -0,0 +1,78 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Seven node Fully Connected Topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/**
+ * 7 node fully connected
+ */
+/**
+ * @dot
+   strict graph full7 {
+     node [shape="plaintext"];
+     0 -- 1 ;    1 -- 2 ;   2 -- 3 ;     3 -- 4 ;   4 -- 5 ; 5 -- 6 ;
+     0 -- 2 ;    1 -- 3 ;   2 -- 4 ;     3 -- 5 ;   4 -- 6 ;
+     0 -- 3 ;    1 -- 4 ;   2 -- 5 ;     3 -- 6 ;
+     0 -- 4 ;    1 -- 5 ;   2 -- 6 ;
+     0 -- 5 ;    1 -- 6 ;
+     0 -- 6 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologySevenFully[] =
+{
+  0x07,
+  0x7E, 0xFF,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55,  0x00, 0x66, // Node 0
+  0x00, 0x00,  0x7D, 0xFF,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55,  0x00, 0x66, // Node 1
+  0x00, 0x00,  0x00, 0x11,  0x7B, 0xFF,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55,  0x00, 0x66, // Node 2
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x77, 0xFF,  0x00, 0x44,  0x00, 0x55,  0x00, 0x66, // Node 3
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x6F, 0xFF,  0x00, 0x55,  0x00, 0x66, // Node 4
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x5F, 0xFF,  0x00, 0x66, // Node 5
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55,  0x3F, 0xFF  // Node 6
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph7TwistedLadder.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph7TwistedLadder.c
new file mode 100644
index 0000000000..6456ef5be2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph7TwistedLadder.c
@@ -0,0 +1,95 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Seven node pop order twisted ladder Topology.
+ *
+ * The population order fall back to Seven nodes on a twisted ladder.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*  6
+ *  |
+ *  4   5
+ *  |\ /|
+ *  |/ \|
+ *  2   3
+ *  |   |
+ *  0---1
+ */
+/**
+ * 7 node twisted ladder
+ */
+/**
+ * @dot
+   strict graph twl7 {
+     node [shape="plaintext"];
+     {rank=same; 0; 1}
+     {rank=same; 2; 3}
+     {rank=same; 4; 5}
+     {rank=same; 6}
+     0 -- 1 ;
+     0 -- 2 ;
+     1 -- 3 ;
+     2 -- 4 ;
+     2 -- 5 ;
+     3 -- 4 ;
+     3 -- 5 ;
+     4 -- 6 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologySevenTwistedLadder[] =
+{
+  0x07,
+  0x06, 0xFF,  0x00, 0x11,  0x02, 0x22,  0x00, 0x12,  0x00, 0x22,  0x00, 0x22,  0x00, 0x22, // Node0
+  0x00, 0x00,  0x09, 0xFF,  0x00, 0x03,  0x01, 0x33,  0x00, 0x33,  0x00, 0x33,  0x00, 0x33, // Node1
+  0x30, 0x00,  0x00, 0x50,  0x31, 0xFF,  0x00, 0x54,  0x21, 0x44,  0x01, 0x55,  0x21, 0x44, // Node2
+  0x00, 0x41,  0x30, 0x11,  0x00, 0x45,  0x32, 0xFF,  0x02, 0x44,  0x12, 0x55,  0x02, 0x44, // Node3
+  0x48, 0x22,  0x40, 0x33,  0x48, 0x22,  0x40, 0x33,  0x4C, 0xFF,  0x40, 0x32,  0x0C, 0x66, // Node4
+  0x00, 0x22,  0x04, 0x33,  0x00, 0x22,  0x04, 0x33,  0x00, 0x23,  0x0C, 0xFF,  0x00, 0x23, // Node5
+  0x00, 0x44,  0x00, 0x44,  0x00, 0x44,  0x00, 0x44,  0x00, 0x44,  0x00, 0x44,  0x10, 0xFF  // Node6
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8DoubloonM.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8DoubloonM.c
new file mode 100644
index 0000000000..92e8174514
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8DoubloonM.c
@@ -0,0 +1,76 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Eight node hydra Topology using "Doubloon/Drachma".
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/**
+ * 8 node hydra doubloon, 4 MCM processors.
+ */
+/**
+ * @dot
+   strict graph doubloon8 {
+     node [shape="plaintext"];
+     0 -- 1 ;    2 -- 3 ;   4 -- 5 ;   6 -- 7 ;
+     0 -- 2 ;    1 -- 2 ;   2 -- 4 ;   3 -- 5 ;   4 -- 6 ; 5 -- 6 ;
+     0 -- 4 ;    1 -- 5 ;   2 -- 6 ;   3 -- 7 ;
+     0 -- 6 ;    1 -- 7 ;   2 -- 7 ;   3 -- 6
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyEightDoubloon[] =
+{
+  0x08,
+  0x56, 0xFF,  0x00, 0x11,  0x00, 0x22,  0x00, 0x22,  0x02, 0x44,  0x00, 0x44,  0x02, 0x66,  0x00, 0x66, // Node 0
+  0x00, 0x00,  0xA5, 0xFF,  0x00, 0x22,  0x00, 0x22,  0x00, 0x55,  0x01, 0x55,  0x00, 0x77,  0x01, 0x77, // Node 1
+  0x08, 0x00,  0x08, 0x11,  0xDB, 0xFF,  0x03, 0x33,  0x08, 0x44,  0x00, 0x44,  0x00, 0x66,  0x00, 0x77, // Node 2
+  0x00, 0x22,  0x00, 0x22,  0x00, 0x22,  0xE4, 0xFF,  0x00, 0x55,  0x04, 0x55,  0x00, 0x66,  0x00, 0x77, // Node 3
+  0x20, 0x00,  0x00, 0x00,  0x20, 0x22,  0x00, 0x22,  0x65, 0xFF,  0x00, 0x55,  0x00, 0x66,  0x00, 0x66, // Node 4
+  0x00, 0x11,  0x10, 0x11,  0x00, 0x33,  0x10, 0x33,  0x00, 0x44,  0x5A, 0xFF,  0x00, 0x66,  0x00, 0x66, // Node 5
+  0x80, 0x00,  0x00, 0x00,  0x00, 0x22,  0x00, 0x33,  0x80, 0x44,  0x80, 0x55,  0xBD, 0xFF,  0x30, 0x77, // Node 6
+  0x00, 0x11,  0x40, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x66,  0x00, 0x66,  0x00, 0x66,  0x4E, 0xFF  // Node 7
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8FullyConnected.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8FullyConnected.c
new file mode 100644
index 0000000000..282f6f20fa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8FullyConnected.c
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Eight node Fully Connected Topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/**
+ * 8 node fully connected
+ */
+/**
+ * @dot
+   strict graph full8 {
+     node [shape="plaintext"];
+     0 -- 1 ;    1 -- 2 ;   2 -- 3 ;   3 -- 4 ;   4 -- 5 ; 5 -- 6 ;  6 -- 7 ;
+     0 -- 2 ;    1 -- 3 ;   2 -- 4 ;   3 -- 5 ;   4 -- 6 ; 5 -- 7 ;
+     0 -- 3 ;    1 -- 4 ;   2 -- 5 ;   3 -- 6 ;   4 -- 7 ;
+     0 -- 4 ;    1 -- 5 ;   2 -- 6 ;   3 -- 7 ;
+     0 -- 5 ;    1 -- 6 ;   2 -- 7 ;
+     0 -- 6 ;    1 -- 7 ;
+     0 -- 7 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyEightFully[] =
+{
+  0x08,
+  0xFE, 0xFF,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55,  0x00, 0x66,  0x00, 0x77, // Node 0
+  0x00, 0x00,  0xFD, 0xFF,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55,  0x00, 0x66,  0x00, 0x77, // Node 1
+  0x00, 0x00,  0x00, 0x11,  0xFB, 0xFF,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55,  0x00, 0x66,  0x00, 0x77, // Node 2
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0xF7, 0xFF,  0x00, 0x44,  0x00, 0x55,  0x00, 0x66,  0x00, 0x77, // Node 3
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0xEF, 0xFF,  0x00, 0x55,  0x00, 0x66,  0x00, 0x77, // Node 4
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0xDF, 0xFF,  0x00, 0x66,  0x00, 0x77, // Node 5
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55,  0xBF, 0xFF,  0x00, 0x77, // Node 6
+  0x00, 0x00,  0x00, 0x11,  0x00, 0x22,  0x00, 0x33,  0x00, 0x44,  0x00, 0x55,  0x00, 0x66,  0x7F, 0xFF  // Node 7
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8Ladder.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8Ladder.c
new file mode 100644
index 0000000000..35f6ddf338
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8Ladder.c
@@ -0,0 +1,96 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Eight node Ladder Topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/*  6---7
+ *  |   |
+ *  4---5
+ *  |   |
+ *  2---3
+ *  |   |
+ *  0---1
+ */
+/**
+ * 8 node ladder
+ */
+/**
+ * @dot
+   strict graph ladder8 {
+     node [shape="plaintext"];
+     {rank=same; 0; 1}
+     {rank=same; 2; 3}
+     {rank=same; 4; 5}
+     {rank=same; 6; 7}
+     0 -- 1 ;
+     0 -- 2 ;
+     1 -- 3 ;
+     2 -- 4 ;
+     2 -- 3 ;
+     3 -- 5 ;
+     4 -- 5 ;
+     4 -- 6 ;
+     5 -- 7 ;
+     6 -- 7 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyEightStraightLadder[] =
+{
+  0x08,
+  0x06, 0xFF,  0x00, 0x11,  0x02, 0x22,  0x00, 0x22,  0x02, 0x22,  0x00, 0x22,  0x02, 0x22,  0x00, 0x22, // Node0
+  0x00, 0x00,  0x09, 0xFF,  0x00, 0x33,  0x01, 0x33,  0x00, 0x33,  0x01, 0x33,  0x00, 0x33,  0x01, 0x33, // Node1
+  0x18, 0x00,  0x00, 0x00,  0x19, 0xFF,  0x00, 0x33,  0x09, 0x44,  0x00, 0x44,  0x09, 0x44,  0x00, 0x44, // Node2
+  0x00, 0x11,  0x24, 0x11,  0x00, 0x22,  0x26, 0xFF,  0x00, 0x55,  0x06, 0x55,  0x00, 0x55,  0x06, 0x55, // Node3
+  0x60, 0x22,  0x00, 0x22,  0x60, 0x22,  0x00, 0x22,  0x64, 0xFF,  0x00, 0x55,  0x24, 0x66,  0x00, 0x66, // Node4
+  0x00, 0x33,  0x90, 0x33,  0x00, 0x33,  0x90, 0x33,  0x00, 0x44,  0x98, 0xFF,  0x00, 0x77,  0x18, 0x77, // Node5
+  0x80, 0x44,  0x00, 0x44,  0x80, 0x44,  0x00, 0x44,  0x80, 0x44,  0x00, 0x44,  0x90, 0xFF,  0x00, 0x77, // Node6
+  0x00, 0x55,  0x40, 0x55,  0x00, 0x55,  0x40, 0x55,  0x00, 0x55,  0x40, 0x55,  0x00, 0x66,  0x60, 0xFF  // Node7
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8TwinFullyFourWays.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8TwinFullyFourWays.c
new file mode 100644
index 0000000000..adb26b9023
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8TwinFullyFourWays.c
@@ -0,0 +1,96 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Eight node Topology of two fully connected four ways.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+
+/* (2 fully connected four ways connected at the 'corners')
+ *
+ *       5 - 7
+ *      /| X |
+ *     / 1 - 3
+ *    / / /  /
+ *   4 - 6  /
+ *   | X | /
+ *   0 - 2-
+ */
+/**
+ * 8 node twin fully connected four ways, connected by the MCM internal links.
+ */
+/**
+ * @dot
+   strict graph hydra8 {
+     node [shape="plaintext"];
+     subgraph even {
+     0 -- 2 ;    2 -- 4 ;   4 -- 6 ;
+     0 -- 4 ;    2 -- 6 ;
+     0 -- 6 ;
+     }
+     subgraph odd {
+     1 -- 3 ;   3 -- 5 ;   5 -- 7 ;
+     1 -- 5 ;   3 -- 7 ;
+     1 -- 7 ;
+     }
+     {rank=same; 0; 2; 1; 3}
+     {rank=same; 4; 6; 5; 7}
+     0 -- 1 ;    2 -- 3 ;   4 -- 5 ;   6 -- 7 ;
+     }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyEightTwinFullyFourWays[] =
+{
+  0x08,
+  0x56, 0xFF,  0x00, 0x11,  0x02, 0x22,  0x00, 0x22,  0x02, 0x44,  0x00, 0x44,  0x02, 0x66,  0x00, 0x66, // Node 0
+  0x00, 0x00,  0xA9, 0xFF,  0x00, 0x33,  0x01, 0x33,  0x00, 0x55,  0x01, 0x55,  0x00, 0x77,  0x01, 0x77, // Node 1
+  0x08, 0x00,  0x00, 0x00,  0x59, 0xFF,  0x00, 0x33,  0x08, 0x44,  0x00, 0x44,  0x08, 0x66,  0x00, 0x66, // Node 2
+  0x00, 0x11,  0x04, 0x11,  0x00, 0x22,  0xA6, 0xFF,  0x00, 0x55,  0x04, 0x55,  0x00, 0x77,  0x04, 0x77, // Node 3
+  0x20, 0x00,  0x00, 0x00,  0x20, 0x22,  0x00, 0x22,  0x65, 0xFF,  0x00, 0x55,  0x20, 0x66,  0x00, 0x66, // Node 4
+  0x00, 0x11,  0x10, 0x11,  0x00, 0x33,  0x10, 0x33,  0x00, 0x44,  0x9A, 0xFF,  0x00, 0x77,  0x10, 0x77, // Node 5
+  0x80, 0x00,  0x00, 0x00,  0x80, 0x22,  0x00, 0x22,  0x80, 0x44,  0x00, 0x44,  0x95, 0xFF,  0x00, 0x77, // Node 6
+  0x00, 0x11,  0x40, 0x11,  0x00, 0x33,  0x40, 0x33,  0x00, 0x55,  0x40, 0x55,  0x00, 0x66,  0x6A, 0xFF  // Node 7
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8TwistedLadder.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8TwistedLadder.c
new file mode 100644
index 0000000000..84eededa82
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htGraph/htGraph8TwistedLadder.c
@@ -0,0 +1,95 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Eight node twisted ladder Topology.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "Porting.h"
+#include "htTopologies.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/*  6---7
+ *  |   |
+ *  4   5
+ *  |\ /|
+ *  |/ \|
+ *  2   3
+ *  |   |
+ *  0---1
+ */
+/**
+ * 8 node twisted ladder
+ */
+/**
+ * @dot
+   strict graph twl8 {
+     node [shape="plaintext"];
+     {rank=same; 0; 1}
+     {rank=same; 2; 3}
+     {rank=same; 4; 5}
+     {rank=same; 6; 7}
+     0 -- 1 ;
+     0 -- 2 ;
+     1 -- 3 ;
+     2 -- 4 ;
+     2 -- 5 ;
+     3 -- 4 ;
+     3 -- 5 ;
+     4 -- 6 ;
+     5 -- 7 ;
+     6 -- 7 ;
+   }
+ @enddot
+ *
+ */
+CONST UINT8 ROMDATA amdHtTopologyEightTwistedLadder[] =
+{
+  0x08,
+  0x06, 0xFF,  0x00, 0x11,  0x02, 0x22,  0x00, 0x12,  0x00, 0x22,  0x00, 0x22,  0x00, 0x22,  0x00, 0x22, // Node0
+  0x00, 0x00,  0x09, 0xFF,  0x00, 0x03,  0x01, 0x33,  0x00, 0x33,  0x00, 0x33,  0x00, 0x33,  0x00, 0x33, // Node1
+  0x30, 0x00,  0x00, 0x50,  0x31, 0xFF,  0x00, 0x54,  0x21, 0x44,  0x01, 0x55,  0x21, 0x44,  0x01, 0x55, // Node2
+  0x00, 0x41,  0x30, 0x11,  0x00, 0x45,  0x32, 0xFF,  0x02, 0x44,  0x12, 0x55,  0x02, 0x44,  0x12, 0x55, // Node3
+  0x48, 0x22,  0x40, 0x33,  0x48, 0x22,  0x40, 0x33,  0x4C, 0xFF,  0x00, 0x32,  0x0C, 0x66,  0x00, 0x36, // Node4
+  0x80, 0x22,  0x84, 0x33,  0x80, 0x22,  0x84, 0x33,  0x00, 0x23,  0x8C, 0xFF,  0x00, 0x27,  0x0C, 0x77, // Node5
+  0x00, 0x44,  0x00, 0x44,  0x00, 0x44,  0x00, 0x44,  0x80, 0x44,  0x00, 0x74,  0x90, 0xFF,  0x00, 0x77, // Node6
+  0x00, 0x55,  0x00, 0x55,  0x00, 0x55,  0x00, 0x55,  0x00, 0x65,  0x40, 0x55,  0x00, 0x66,  0x60, 0xFF  // Node7
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htInterface.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterface.c
new file mode 100644
index 0000000000..f2cae04a28
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterface.c
@@ -0,0 +1,263 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * External Interface implementation.
+ *
+ * Contains routines for implementing the interface to the client BIOS.
+ * This file includes the interface access constructor.
+ * This file implements build options using conditional compilation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "OptionsHt.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "CommonReturns.h"
+#include "htInterfaceGeneral.h"
+#include "htInterfaceCoherent.h"
+#include "htInterfaceNonCoherent.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_HTINTERFACE_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern CONST OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * The default initializer for the HT internal interface, full features.
+ */
+CONST HT_INTERFACE ROMDATA HtInterfaceDefault =
+{
+  GetCpu2CpuPcbLimits,
+  GetSkipRegang,
+  NewHopCountTable,
+  GetOverrideBusNumbers,
+  GetManualBuidSwapList,
+  GetDeviceCapOverride,
+  GetIoPcbLimits,
+  GetSocketFromMap,
+  GetIgnoreLink,
+  PostMapToAp,
+  NewNodeAndSocketTables,
+  CleanMapsAfterError,
+  SetNodeToSocketMap,
+  GetMinNbCoreFreq
+};
+
+/**
+ * The initializer for the HT internal interface, coherent only features.
+ */
+CONST HT_INTERFACE ROMDATA HtInterfaceCoherentOnly =
+{
+  GetCpu2CpuPcbLimits,
+  GetSkipRegang,
+  NewHopCountTable,
+  GetOverrideBusNumbers,
+  (PF_GET_MANUAL_BUID_SWAP_LIST)CommonReturnFalse,
+  (PF_GET_DEVICE_CAP_OVERRIDE)CommonVoid,
+  (PF_GET_IO_PCB_LIMITS)CommonVoid,
+  GetSocketFromMap,
+  GetIgnoreLink,
+  PostMapToAp,
+  NewNodeAndSocketTables,
+  CleanMapsAfterError,
+  SetNodeToSocketMap,
+  GetMinNbCoreFreq
+};
+
+/**
+ * The non-coherent only build option initializer for the HT internal interface.
+ */
+CONST HT_INTERFACE ROMDATA HtInterfaceNonCoherentOnly =
+{
+  (PF_GET_CPU_2_CPU_PCB_LIMITS)CommonVoid,
+  (PF_GET_SKIP_REGANG)CommonReturnFalse,
+  (PF_NEW_HOP_COUNT_TABLE)CommonVoid,
+  GetOverrideBusNumbers,
+  GetManualBuidSwapList,
+  GetDeviceCapOverride,
+  GetIoPcbLimits,
+  GetSocketFromMap,
+  GetIgnoreLink,
+  PostMapToAp,
+  NewNodeAndSocketTables,
+  (PF_CLEAN_MAPS_AFTER_ERROR)CommonVoid,
+  SetNodeToSocketMap,
+  GetMinNbCoreFreq
+};
+
+/**
+ * Topology Maps only feature build option initializer for the HT internal interface.
+ */
+CONST HT_INTERFACE ROMDATA HtInterfaceMapsOnly =
+{
+  (PF_GET_CPU_2_CPU_PCB_LIMITS)CommonVoid,
+  (PF_GET_SKIP_REGANG)CommonReturnFalse,
+  (PF_NEW_HOP_COUNT_TABLE)CommonVoid,
+  (PF_GET_OVERRIDE_BUS_NUMBERS)CommonReturnFalse,
+  (PF_GET_MANUAL_BUID_SWAP_LIST)CommonReturnFalse,
+  (PF_GET_DEVICE_CAP_OVERRIDE)CommonVoid,
+  (PF_GET_IO_PCB_LIMITS)CommonVoid,
+  (PF_GET_SOCKET_FROM_MAP)CommonReturnZero8,
+  (PF_GET_IGNORE_LINK)CommonReturnFalse,
+  PostMapToAp,
+  NewNodeAndSocketTables,
+  (PF_CLEAN_MAPS_AFTER_ERROR)CommonVoid,
+  SetNodeToSocketMap,
+  (PF_GET_MIN_NB_CORE_FREQ)CommonReturnZero8
+};
+
+/**
+ * No features build option initializer for the HT internal interface.
+ */
+CONST HT_INTERFACE ROMDATA HtInterfaceNone =
+{
+  (PF_GET_CPU_2_CPU_PCB_LIMITS)CommonVoid,
+  (PF_GET_SKIP_REGANG)CommonReturnFalse,
+  (PF_NEW_HOP_COUNT_TABLE)CommonVoid,
+  (PF_GET_OVERRIDE_BUS_NUMBERS)CommonReturnFalse,
+  (PF_GET_MANUAL_BUID_SWAP_LIST)CommonReturnFalse,
+  (PF_GET_DEVICE_CAP_OVERRIDE)CommonVoid,
+  (PF_GET_IO_PCB_LIMITS)CommonVoid,
+  (PF_GET_SOCKET_FROM_MAP)CommonReturnZero8,
+  (PF_GET_IGNORE_LINK)CommonReturnFalse,
+  (PF_POST_MAP_TO_AP)CommonVoid,
+  (PF_NEW_NODE_AND_SOCKET_TABLES)CommonVoid,
+  (PF_CLEAN_MAPS_AFTER_ERROR)CommonVoid,
+  (PF_SET_NODE_TO_SOCKET_MAP)CommonVoid,
+  (PF_GET_MIN_NB_CORE_FREQ)CommonReturnZero8
+};
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * A constructor for the internal Ht Interface.
+ *
+ * The install has a reference to the initializer appropriate to the user selected build
+ * options.  Use the selected initializer to construct the internal interface.
+ *
+ * @param[in,out]   HtInterface    Contains pointer to HT Interface structure to initialize.
+ * @param[in]       StdHeader         Opaque handle to standard config header
+ *
+*/
+VOID
+NewHtInterface (
+     OUT   HT_INTERFACE         *HtInterface,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  )
+{
+  LibAmdMemCopy (
+    (VOID *) HtInterface,
+    (VOID *) OptionHtConfiguration.HtOptionInternalInterface,
+    (sizeof (HT_INTERFACE)),
+    StdHeader
+    );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * A "constructor" for the HyperTransport external interface.
+ *
+ * Sets inputs to valid, basic level, defaults.
+ *
+ * Copy the initial default values from the build options tables to the interface struct.
+ *
+ * @param[in]   StdHeader       Opaque handle to standard config header
+ * @param[in]   AmdHtInterface  HT Interface structure to initialize.
+ *
+ * @retval AGESA_SUCCESS      Constructors are not allowed to fail
+*/
+AGESA_STATUS
+AmdHtInterfaceConstructor (
+  IN       AMD_CONFIG_PARAMS    *StdHeader,
+  IN       AMD_HT_INTERFACE     *AmdHtInterface
+  )
+{
+  LibAmdMemCopy (
+    (VOID *) AmdHtInterface,
+    (VOID *) OptionHtConfiguration.HtOptionPlatformDefaults,
+    (UINT32) (sizeof (AMD_HT_INTERFACE)),
+    StdHeader
+    );
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htInterface.h b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterface.h
new file mode 100644
index 0000000000..68cc0707d2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterface.h
@@ -0,0 +1,490 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Internal access to HT Interface.
+ *
+ * This file provides definitions used by HT internal modules.  The
+ * external HT interface (in agesa.h) is accessed using these methods.
+ * This keeps the HT Feature implementations abstracted from the HT
+ * interface.
+ *
+ * This file includes the interface access constructor and interface
+ * support which is not removed with various build options.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $        @e  \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_INTERFACE_H_
+#define _HT_INTERFACE_H_
+
+/**
+ * @page htimplintf HT Internal Interface Implementation Guide
+ *
+ * HT Internal Interface provides access to the HT Component external interface (see AGESA.h),
+ * in a manner that isolates calling code from knowledge about the external interface or which
+ * interfaces are supported in the current build.
+ *
+ * @par Adding a Method to HT Internal Interface
+ *
+ * To add a new method to the HT Internal Interface, follow these steps.
+ * <ul>
+ * <li> Create a typedef for the Method with the correct parameters and return type.
+ *
+ *   <ul>
+ *   <li> Name the method typedef (F_METHOD_NAME)(), where METHOD_NAME is the same name as the method table item,
+ *     but with "_"'s and UPPERCASE, rather than mixed case.
+ *     @n <tt> typedef VOID (F_METHOD_NAME)(); </tt> @n
+ *
+ *   <li> Make a reference type for references to a method implementation:
+ *     @n <tt> /// Reference to a Method              </tt>
+ *     @n <tt> typedef F_METHOD_NAME *PF_METHOD_NAME  </tt> @n
+ *   </ul>
+ *
+ * <li> Provide a standard doxygen function preamble for the Method typedef. Begin the
+ *   detailed description by providing a reference to the method instances page by including
+ *   the lines below:
+ *   @code
+ *   *
+ *   * @HtInterfaceInstances
+ *   *
+ *   @endcode
+ *   @note It is important to provide documentation for the method type, because the method may not
+ *   have an implementation in any families supported by the current package. @n
+ *
+ * <li> Add to the HT_INTERFACE struct an item for the Method:
+ *   @n <tt>  PF_METHOD_NAME MethodName; ///< Method: description. </tt> @n
+ * </ul>
+ *
+ * @par Implementing an HT Internal Interface Instance of the method.
+ *
+ * To implement an instance of a method for a specific interface  follow these steps.
+ *
+ * - In appropriate files, implement the method with the return type and parameters
+ * matching the method typedef.
+ *
+ * - Name the function MethodName().
+ *
+ * - Create a doxygen function preamble for the method instance.  Begin the detailed description with
+ *   an Implements command to reference the method type and add this instance to the Method Instances page.
+ *   @code
+ *   *
+ *   *  @HtInterfaceMethod{::F_METHOD_NAME}.
+ *   *
+ *   @endcode
+ *
+ * - To access other Ht internal interface routines or data as part of the method implementation, the function
+ *   must use HtInterface->OtherMethod().  Do not directly access other HT internal interface
+ *   routines, because in the table there may be overrides or this routine may be shared by multiple families.
+ *
+ * - Add the instance to the HT_INTERFACE instances.
+ *
+ * - If a configuration does not need an instance of the method use one of the CommonReturns from
+ *   CommonReturns.h with the same return type.
+ *
+ * @par Invoking HT Internal Interface Methods.
+ *
+ * The first step is carried out only once by the top level HT entry point.
+ * @n @code
+ *   HT_INTERFACE HtInterface;
+ *   // Get the current HT internal interface (to HtBlock data)
+ *   NewHtInterface (&HtInterface);
+ *   State->HtInterface = &HtInterface;
+ * @endcode
+ *
+ * The following example shows how to invoke a HT Internal Interface method.
+ * @n @code
+ *    State->HtInterface->MethodName ();
+ * @endcode
+ *
+ */
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Get limits for CPU to CPU Links.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in]     NodeA            One Node on which this Link is located
+ * @param[in]     LinkA            The Link on this Node
+ * @param[in]     NodeB            The other Node on which this Link is located
+ * @param[in]     LinkB            The Link on that Node
+ * @param[in,out] ABLinkWidthLimit modify to change the Link Width In
+ * @param[in,out] BALinkWidthLimit modify to change the Link Width Out
+ * @param[in,out] PcbFreqCap       modify to change the Link's frequency capability
+ * @param[in]     State            the input data
+ *
+ */
+typedef VOID F_GET_CPU_2_CPU_PCB_LIMITS (
+  IN       UINT8        NodeA,
+  IN       UINT8        LinkA,
+  IN       UINT8        NodeB,
+  IN       UINT8        LinkB,
+  IN OUT   UINT8        *ABLinkWidthLimit,
+  IN OUT   UINT8        *BALinkWidthLimit,
+  IN OUT   UINT32       *PcbFreqCap,
+  IN       STATE_DATA   *State
+  );
+/// Reference to a method.
+typedef F_GET_CPU_2_CPU_PCB_LIMITS *PF_GET_CPU_2_CPU_PCB_LIMITS;
+
+/**
+ * Skip reganging of subLinks.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in]     NodeA    One Node on which this Link is located
+ * @param[in]     LinkA    The Link on this Node
+ * @param[in]     NodeB    The other Node on which this Link is located
+ * @param[in]     LinkB    The Link on that Node
+ * @param[in]     State    the input data
+ *
+ * @retval        MATCHED      leave Link unganged
+ * @retval        POWERED_OFF  leave link unganged and power off the paired sublink
+ * @retval        UNMATCHED    regang Link automatically
+ */
+typedef FINAL_LINK_STATE F_GET_SKIP_REGANG (
+  IN       UINT8        NodeA,
+  IN       UINT8        LinkA,
+  IN       UINT8        NodeB,
+  IN       UINT8        LinkB,
+  IN       STATE_DATA   *State
+  );
+/// Reference to a method.
+typedef F_GET_SKIP_REGANG *PF_GET_SKIP_REGANG;
+
+/**
+ * Manually control bus number assignment.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in]     Node      The Node on which this chain is located
+ * @param[in]     Link      The Link on the host for this chain
+ * @param[out]    SecBus    Secondary Bus number for this non-coherent chain
+ * @param[out]    SubBus    Subordinate Bus number
+ * @param[in]     State     the input data
+ *
+ * @retval        TRUE      this routine is supplying the bus numbers
+ * @retval        FALSE     use auto Bus numbering
+ */
+typedef BOOLEAN F_GET_OVERRIDE_BUS_NUMBERS (
+  IN       UINT8        Node,
+  IN       UINT8        Link,
+     OUT   UINT8        *SecBus,
+     OUT   UINT8        *SubBus,
+  IN       STATE_DATA   *State
+  );
+/// Reference to a method.
+typedef F_GET_OVERRIDE_BUS_NUMBERS *PF_GET_OVERRIDE_BUS_NUMBERS;
+
+/**
+ * Get Manual BUID assignment list.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in]    Node    The Node on which this chain is located
+ * @param[in]    Link    The Link on the host for this chain
+ * @param[out]   List    a pointer to a list, if returns TRUE
+ * @param[in]    State   the input data
+ *
+ * @retval      TRUE     use manual List
+ * @retval      FALSE    initialize the Link automatically. List not valid.
+ */
+typedef BOOLEAN F_GET_MANUAL_BUID_SWAP_LIST (
+  IN       UINT8            Node,
+  IN       UINT8            Link,
+     OUT   BUID_SWAP_LIST   **List,
+  IN       STATE_DATA       *State
+  );
+/// Reference to a method.
+typedef F_GET_MANUAL_BUID_SWAP_LIST *PF_GET_MANUAL_BUID_SWAP_LIST;
+
+/**
+ * Override capabilities of a device.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in]     HostNode      The Node on which this chain is located
+ * @param[in]     HostLink      The Link on the host for this chain
+ * @param[in]     Depth         The Depth in the I/O chain from the Host
+ * @param[in]     PciAddress    The Device's PCI config address (for callout)
+ * @param[in]     DevVenId      The Device's PCI Vendor + Device ID (offset 0x00)
+ * @param[in]     Revision      The Device's PCI Revision
+ * @param[in]     Link          The Device's Link number (0 or 1)
+ * @param[in,out] LinkWidthIn   modify to change the Link Width In
+ * @param[in,out] LinkWidthOut  modify to change the Link Width Out
+ * @param[in,out] FreqCap       modify to change the Link's frequency capability
+ * @param[in,out] Clumping      modify to change unit id clumping capability
+ * @param[in]     State         the input data
+ *
+ */
+typedef VOID F_GET_DEVICE_CAP_OVERRIDE (
+  IN       UINT8       HostNode,
+  IN       UINT8       HostLink,
+  IN       UINT8       Depth,
+  IN       PCI_ADDR    PciAddress,
+  IN       UINT32      DevVenId,
+  IN       UINT8       Revision,
+  IN       UINT8       Link,
+  IN OUT   UINT8       *LinkWidthIn,
+  IN OUT   UINT8       *LinkWidthOut,
+  IN OUT   UINT32      *FreqCap,
+  IN OUT   UINT32      *Clumping,
+  IN       STATE_DATA  *State
+  );
+/// Reference to a method.
+typedef F_GET_DEVICE_CAP_OVERRIDE *PF_GET_DEVICE_CAP_OVERRIDE;
+
+/**
+ * Get limits for non-coherent Links.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in]     HostNode                   The Node on which this Link is located
+ * @param[in]     HostLink                   The Link about to be initialized
+ * @param[in]     Depth                      The Depth in the I/O chain from the Host
+ * @param[in,out] DownstreamLinkWidthLimit   modify to change the Link Width In
+ * @param[in,out] UpstreamLinkWidthLimit     modify to change the Link Width Out
+ * @param[in,out] PcbFreqCap                 modify to change the Link's frequency capability
+ * @param[in]     State                      the input data
+ */
+typedef VOID F_GET_IO_PCB_LIMITS (
+  IN       UINT8        HostNode,
+  IN       UINT8        HostLink,
+  IN       UINT8        Depth,
+  IN OUT   UINT8        *DownstreamLinkWidthLimit,
+  IN OUT   UINT8        *UpstreamLinkWidthLimit,
+  IN OUT   UINT32       *PcbFreqCap,
+  IN       STATE_DATA   *State
+  );
+/// Reference to a method.
+typedef F_GET_IO_PCB_LIMITS *PF_GET_IO_PCB_LIMITS;
+
+/**
+ * Get the Socket number for a given Node number.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in]     Node    Node discovered event data.
+ * @param[in]     State   reference to Node to socket map
+ *
+ * @return the socket id
+ *
+ */
+typedef UINT8 F_GET_SOCKET_FROM_MAP (
+  IN       UINT8         Node,
+  IN       STATE_DATA    *State
+  );
+/// Reference to a method.
+typedef F_GET_SOCKET_FROM_MAP *PF_GET_SOCKET_FROM_MAP;
+
+/**
+ * Ignore a Link.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in]     Node   The Node on which this Link is located
+ * @param[in]     Link   The Link about to be initialized
+ * @param[in]     NbList The northbridge default ignore link list
+ * @param[in]     State   the input data
+ *
+ * @retval        MATCHED     ignore this Link and skip it
+ * @retval        POWERED_OFF ignore this link and power it off.
+ * @retval        UNMATCHED   initialize the Link normally
+ */
+typedef FINAL_LINK_STATE F_GET_IGNORE_LINK (
+  IN       UINT8        Node,
+  IN       UINT8        Link,
+  IN       IGNORE_LINK  *NbIgnoreLinkList,
+  IN       STATE_DATA   *State
+  );
+/// Reference to a method.
+typedef F_GET_IGNORE_LINK *PF_GET_IGNORE_LINK;
+
+/**
+ * Post Node id and other context info to AP cores via mailbox.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] State Our state
+ */
+typedef VOID F_POST_MAP_TO_AP (
+  IN       STATE_DATA *State
+  );
+/// Reference to a method.
+typedef F_POST_MAP_TO_AP *PF_POST_MAP_TO_AP;
+
+/**
+ * Clean up the map structures after severe event has caused a fall back to 1 node.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] State Our state
+ */
+typedef VOID F_CLEAN_MAPS_AFTER_ERROR (
+  IN       STATE_DATA *State
+  );
+/// Reference to a method.
+typedef F_CLEAN_MAPS_AFTER_ERROR *PF_CLEAN_MAPS_AFTER_ERROR;
+
+/**
+ * Get a new Socket Die to Node Map.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in,out] State global state
+ */
+typedef VOID F_NEW_NODE_AND_SOCKET_TABLES (
+  IN OUT   STATE_DATA *State
+  );
+/// Reference to a method.
+typedef F_NEW_NODE_AND_SOCKET_TABLES *PF_NEW_NODE_AND_SOCKET_TABLES;
+
+/**
+ * Fill in the socket's Node id when a processor is discovered in that socket.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] Node                Node from which a new node was discovered
+ * @param[in] CurrentNodeModule   The current node's module id in it's processor.
+ * @param[in] PackageLink         The package level link from Node to NewNode.
+ * @param[in] NewNode             The new node's id
+ * @param[in] HardwareSocket      If we use the hardware method (preferred), this is the socket of new node.
+ * @param[in] Module              The new node's module id in it's processor.
+ * @param[in] State               our State
+ */
+typedef VOID F_SET_NODE_TO_SOCKET_MAP (
+  IN       UINT8 Node,
+  IN       UINT8 CurrentNodeModule,
+  IN       UINT8 PackageLink,
+  IN       UINT8 NewNode,
+  IN       UINT8 HardwareSocket,
+  IN       UINT8 Module,
+  IN       STATE_DATA *State
+  );
+/// Reference to a method.
+typedef F_SET_NODE_TO_SOCKET_MAP *PF_SET_NODE_TO_SOCKET_MAP;
+
+/**
+ * Get a new, empty Hop Count Table, to make one for the installed topology.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in,out]   State    Keep our buffer handle.
+ *
+ */
+typedef VOID F_NEW_HOP_COUNT_TABLE (
+  IN OUT   STATE_DATA     *State
+  );
+/// Reference to a method.
+typedef F_NEW_HOP_COUNT_TABLE *PF_NEW_HOP_COUNT_TABLE;
+
+/**
+ * Get the minimum Northbridge frequency for the system.
+ *
+ * @HtInterfaceInstances.
+ *
+ * Invoke the CPU component power mgt interface.
+ *
+ * @param[in]    PlatformConfig   Platform profile/build option config structure.
+ * @param[in]    StdHeader        Config for library and services.
+ *
+ * @return Frequency in MHz.
+ *
+ */
+typedef UINT32 F_GET_MIN_NB_CORE_FREQ (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+/// Reference to a Method.
+typedef F_GET_MIN_NB_CORE_FREQ *PF_GET_MIN_NB_CORE_FREQ;
+
+/**
+ * The HT Interface, feature code uses these methods to get interface parameters.
+ */
+struct _HT_INTERFACE {                                // See Forward Declaration in HtFeates.h
+  PF_GET_CPU_2_CPU_PCB_LIMITS GetCpu2CpuPcbLimits;    /**< Method: Get link limits for coherent links. */
+  PF_GET_SKIP_REGANG GetSkipRegang;                   /**< Method: Skip reganging for coherent links. */
+  PF_NEW_HOP_COUNT_TABLE NewHopCountTable;            /**< Method: Get a new hop count table. */
+  PF_GET_OVERRIDE_BUS_NUMBERS GetOverrideBusNumbers;  /**< Method: Control Bus number assignment. */
+  PF_GET_MANUAL_BUID_SWAP_LIST GetManualBuidSwapList; /**< Method: Assign device IDs. */
+  PF_GET_DEVICE_CAP_OVERRIDE GetDeviceCapOverride;    /**< Method: Override Device capabilities. */
+  PF_GET_IO_PCB_LIMITS GetIoPcbLimits;                /**< Method: Get link limits for noncoherent links. */
+  PF_GET_SOCKET_FROM_MAP GetSocketFromMap;            /**< Method: Get the Socket for a node id. */
+  PF_GET_IGNORE_LINK GetIgnoreLink;                   /**< Method: Ignore a link. */
+  PF_POST_MAP_TO_AP PostMapToAp;                      /**< Method: Post Socket and other info to AP cores. */
+  PF_NEW_NODE_AND_SOCKET_TABLES NewNodeAndSocketTables; /**< Method: Get new socket and node maps. */
+  PF_CLEAN_MAPS_AFTER_ERROR CleanMapsAfterError;       /**< Method: Clean up maps for forced 1P on error fall back. */
+  PF_SET_NODE_TO_SOCKET_MAP SetNodeToSocketMap;       /**< Method: Associate a node id with a socket. */
+  PF_GET_MIN_NB_CORE_FREQ GetMinNbCoreFreq;           /**< Method: Get the minimum northbridge frequency */
+} ;
+
+/*----------------------------------------------------------------------------
+ *                         Prototypes to Interface from Feature Code
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * A constructor for the internal Ht Interface.
+ *
+*/
+VOID
+NewHtInterface (
+     OUT   HT_INTERFACE         *HtInterface,
+  IN       AMD_CONFIG_PARAMS    *StdHeader
+  );
+
+#endif  /* _HT_INTERFACE_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceCoherent.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceCoherent.c
new file mode 100644
index 0000000000..87819dc2d8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceCoherent.c
@@ -0,0 +1,264 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * External Interface implementation for coherent features.
+ *
+ * Contains routines for accessing the interface to the client BIOS,
+ * for support only required for coherent features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htInterfaceGeneral.h"
+#include "htInterfaceCoherent.h"
+#include "htNb.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_HTINTERFACECOHERENT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get limits for CPU to CPU Links.
+ *
+ * @HtInterfaceMethod{::F_GET_CPU_2_CPU_PCB_LIMITS}
+ *
+ * For each coherent connection this routine is called once.  Update the frequency
+ * and width if needed for this Link (usually based on board restriction).  This is
+ * used with CPU device capabilities and northbridge limits to compute the default
+ * settings.  The input width and frequency are valid, but do not necessarily reflect
+ * the minimum setting that will be chosen.
+ *
+ * @param[in]     NodeA One Node on which this Link is located
+ * @param[in]     LinkA The Link on this Node
+ * @param[in]     NodeB The other Node on which this Link is located
+ * @param[in]     LinkB The Link on that Node
+ * @param[in,out] ABLinkWidthLimit modify to change the Link Width In
+ * @param[in,out] BALinkWidthLimit modify to change the Link Width Out
+ * @param[in,out] PcbFreqCap modify to change the Link's frequency capability
+ * @param[in]     State the input data
+ *
+ */
+VOID
+GetCpu2CpuPcbLimits (
+  IN       UINT8        NodeA,
+  IN       UINT8        LinkA,
+  IN       UINT8        NodeB,
+  IN       UINT8        LinkB,
+  IN OUT   UINT8        *ABLinkWidthLimit,
+  IN OUT   UINT8        *BALinkWidthLimit,
+  IN OUT   UINT32       *PcbFreqCap,
+  IN       STATE_DATA   *State
+  )
+{
+  CPU_TO_CPU_PCB_LIMITS *p;
+  UINT8 SocketA;
+  UINT8 SocketB;
+  UINT8 PackageLinkA;
+  UINT8 PackageLinkB;
+
+  ASSERT ((NodeA < MAX_NODES) && (NodeB < MAX_NODES));
+  ASSERT ((LinkA < State->Nb->MaxLinks) && (LinkB < State->Nb->MaxLinks));
+
+  SocketA = State->HtInterface->GetSocketFromMap (NodeA, State);
+  PackageLinkA = State->Nb->GetPackageLink (NodeA, LinkA, State->Nb);
+  SocketB = State->HtInterface->GetSocketFromMap (NodeB, State);
+  PackageLinkB = State->Nb->GetPackageLink (NodeB, LinkB, State->Nb);
+
+  if (State->HtBlock->CpuToCpuPcbLimitsList != NULL) {
+    p = State->HtBlock->CpuToCpuPcbLimitsList;
+
+    while (p->SocketA != HT_LIST_TERMINAL) {
+      if (((p->SocketA == SocketA) || (p->SocketA == HT_LIST_MATCH_ANY)) &&
+          ((p->LinkA == PackageLinkA) || ((p->LinkA == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLinkA))) ||
+           ((p->LinkA == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkA)))) &&
+          ((p->SocketB == SocketB) || (p->SocketB == HT_LIST_MATCH_ANY)) &&
+          ((p->LinkB == PackageLinkB) || ((p->LinkB == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLinkB))) ||
+           ((p->LinkB == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkB))))) {
+        // Found a match, update width and frequency
+        *ABLinkWidthLimit = p->ABLinkWidthLimit;
+        *BALinkWidthLimit = p->BALinkWidthLimit;
+        *PcbFreqCap = p->PcbFreqCap;
+        break;
+      } else {
+        p++;
+      }
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Skip reganging of subLinks.
+ *
+ * @HtInterfaceMethod{::F_GET_SKIP_REGANG}
+ *
+ * This routine is called whenever two subLinks are both connected to the same CPUs.
+ * Normally, unganged sublinks between the same two CPUs are reganged.  Return true
+ * from this routine to leave the Links unganged.
+ *
+ * @param[in]     NodeA    One Node on which this Link is located
+ * @param[in]     LinkA    The Link on this Node
+ * @param[in]     NodeB    The other Node on which this Link is located
+ * @param[in]     LinkB    The Link on that Node
+ * @param[in]     State     the input data
+ *
+ * @retval        MATCHED      leave Link unganged
+ * @retval        POWERED_OFF  leave link unganged and power off the paired sublink
+ * @retval        UNMATCHED    regang Link automatically
+ */
+FINAL_LINK_STATE
+GetSkipRegang (
+  IN       UINT8        NodeA,
+  IN       UINT8        LinkA,
+  IN       UINT8        NodeB,
+  IN       UINT8        LinkB,
+  IN       STATE_DATA   *State
+  )
+{
+  SKIP_REGANG *p;
+  FINAL_LINK_STATE Result;
+  UINT8 SocketA;
+  UINT8 SocketB;
+  UINT8 PackageLinkA;
+  UINT8 PackageLinkB;
+
+  ASSERT ((NodeA < MAX_NODES) && (NodeB < MAX_NODES));
+  ASSERT ((LinkA < State->Nb->MaxLinks) && (LinkB < State->Nb->MaxLinks));
+
+  Result = UNMATCHED;
+  SocketA = State->HtInterface->GetSocketFromMap (NodeA, State);
+  PackageLinkA = State->Nb->GetPackageLink (NodeA, LinkA, State->Nb);
+  SocketB = State->HtInterface->GetSocketFromMap (NodeB, State);
+  PackageLinkB = State->Nb->GetPackageLink (NodeB, LinkB, State->Nb);
+
+  if (State->HtBlock->SkipRegangList != NULL) {
+    p = State->HtBlock->SkipRegangList;
+
+    while (p->SocketA != HT_LIST_TERMINAL) {
+      if (((p->SocketA == SocketA) || (p->SocketA == HT_LIST_MATCH_ANY)) &&
+          ((p->LinkA == PackageLinkA) || ((p->LinkA == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLinkA))) ||
+            ((p->LinkA == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkA)))) &&
+          ((p->SocketB == SocketB) || (p->SocketB == HT_LIST_MATCH_ANY)) &&
+          ((p->LinkB == PackageLinkB) || ((p->LinkB == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLinkB))) ||
+            ((p->LinkB == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkB))))) {
+        // Found a match return final link state
+        Result = p->LinkState;
+        break;
+      } else {
+        p++;
+      }
+    }
+  }
+  return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get a new, empty Hop Count Table, to make one for the installed topology.
+ *
+ * @HtInterfaceMethod{::F_NEW_HOP_COUNT_TABLE}
+ *
+ * For SLIT, publish a matrix with the hop count, by allocating a buffer on heap with a
+ * known signature.
+ *
+ * @param[in,out]   State    Keep our buffer handle.
+ *
+ */
+VOID
+NewHopCountTable (
+  IN OUT   STATE_DATA     *State
+  )
+{
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  AllocHeapParams.RequestedBufferSize = sizeof (HOP_COUNT_TABLE);
+  AllocHeapParams.BufferHandle = HOP_COUNT_TABLE_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (HeapAllocateBuffer ( &AllocHeapParams, State->ConfigHandle) == AGESA_SUCCESS) {
+    State->HopCountTable = (HOP_COUNT_TABLE *)AllocHeapParams.BufferPtr;
+  } else {
+    State->HopCountTable = NULL;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceCoherent.h b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceCoherent.h
new file mode 100644
index 0000000000..5265dea52d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceCoherent.h
@@ -0,0 +1,115 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Internal access to HT Interface for coherent features.
+ *
+ * This file provides definitions used by HT internal modules.  The
+ * external HT interface (in agesa.h) is accessed using these methods.
+ * This keeps the HT Feature implementations abstracted from the HT
+ * interface.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $        @e  \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_INTERFACE_COHERENT_H_
+#define _HT_INTERFACE_COHERENT_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         Prototypes to Interface from Feature Code
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Get limits for CPU to CPU Links.
+ *
+ */
+VOID
+GetCpu2CpuPcbLimits (
+  IN       UINT8        NodeA,
+  IN       UINT8        LinkA,
+  IN       UINT8        NodeB,
+  IN       UINT8        LinkB,
+  IN OUT   UINT8        *ABLinkWidthLimit,
+  IN OUT   UINT8        *BALinkWidthLimit,
+  IN OUT   UINT32       *PcbFreqCap,
+  IN       STATE_DATA   *State
+  );
+
+/**
+ * Skip reganging of subLinks.
+ *
+ */
+FINAL_LINK_STATE
+GetSkipRegang (
+  IN       UINT8        NodeA,
+  IN       UINT8        LinkA,
+  IN       UINT8        NodeB,
+  IN       UINT8        LinkB,
+  IN       STATE_DATA   *State
+  );
+
+/**
+ * Get a new, empty Hop Count Table, to make one for the installed topology.
+ *
+ */
+VOID
+NewHopCountTable (
+  IN OUT   STATE_DATA     *State
+  );
+
+#endif  /* _HT_INTERFACE_COHERENT_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceGeneral.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceGeneral.c
new file mode 100644
index 0000000000..0e7c0d2116
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceGeneral.c
@@ -0,0 +1,539 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * External Interface implementation, general purpose features.
+ *
+ * Contains routines for implementing the interface to the client BIOS.  This file
+ * includes the interface support which is not removed with various build options.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionMultiSocket.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htInterfaceGeneral.h"
+#include "htNb.h"
+#include "cpuServices.h"
+#include "cpuFeatures.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_HTINTERFACEGENERAL_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Is PackageLink an Internal Link?
+ *
+ * This is a test for the logical link match codes in the user interface, not a test for
+ * the actual northbridge links.
+ *
+ * @param[in]    PackageLink   The link
+ *
+ * @retval       TRUE          This is an internal link
+ * @retval       FALSE         This is not an internal link
+ */
+BOOLEAN
+IsPackageLinkInternal (
+  IN       UINT8  PackageLink
+  )
+{
+  return (BOOLEAN) ((PackageLink <= HT_LIST_MATCH_INTERNAL_LINK_2) && (PackageLink >= HT_LIST_MATCH_INTERNAL_LINK_0));
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Ignore a Link.
+ *
+ * @HtInterfaceMethod{::F_GET_IGNORE_LINK}
+ *
+ * This routine is called every time a coherent Link is found and then every time a
+ * non-coherent Link from a CPU is found.  Any coherent or non-coherent Link from a
+ * CPU can be ignored and not used for discovery or initialization.  Useful for
+ * connection based systems.
+ *
+ * @note not called for IO device to IO Device Links.
+ *
+ * @param[in]     Node             The Node on which this Link is located
+ * @param[in]     Link             The Link about to be initialized
+ * @param[in]     NbIgnoreLinkList The northbridge default ignore link list
+ * @param[in]     State            the input data
+ *
+ * @retval        MATCHED     ignore this Link and skip it
+ * @retval        POWERED_OFF ignore this link and power it off.
+ * @retval        UNMATCHED   initialize the Link normally
+ */
+FINAL_LINK_STATE
+GetIgnoreLink (
+  IN       UINT8            Node,
+  IN       UINT8            Link,
+  IN       IGNORE_LINK     *NbIgnoreLinkList,
+  IN       STATE_DATA      *State
+  )
+{
+  IGNORE_LINK *p;
+  FINAL_LINK_STATE Result;
+  BOOLEAN IsFound;
+  UINT8 Socket;
+  UINT8 PackageLink;
+
+  ASSERT ((Node < MAX_NODES) && (Link < MAX_NODES));
+
+  Result = UNMATCHED;
+  IsFound = FALSE;
+  Socket = State->HtInterface->GetSocketFromMap (Node, State);
+  PackageLink = State->Nb->GetPackageLink (Node, Link, State->Nb);
+
+  if (State->HtBlock->IgnoreLinkList != NULL) {
+    p = State->HtBlock->IgnoreLinkList;
+    while (p->Socket != HT_LIST_TERMINAL) {
+      if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) &&
+          ((p->Link == PackageLink) ||
+           ((p->Link == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLink))) ||
+           ((p->Link == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLink))))) {
+        // Found a match return the desired link state.
+        ASSERT (Result < MaxFinalLinkState);
+        Result = p->LinkState;
+        IsFound = TRUE;
+        break;
+      } else {
+        p++;
+      }
+    }
+  }
+  // If there wasn't a match in the user interface, see if the northbridge provides one.
+  if (!IsFound && (NbIgnoreLinkList != NULL)) {
+    p = NbIgnoreLinkList;
+    while (p->Socket != HT_LIST_TERMINAL) {
+      if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) &&
+          ((p->Link == PackageLink) ||
+           ((p->Link == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLink))) ||
+           ((p->Link == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLink))))) {
+        // Found a match return the desired link state.
+        ASSERT (Result < MaxFinalLinkState);
+        Result = p->LinkState;
+        break;
+      } else {
+        p++;
+      }
+    }
+  }
+  return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the Socket number for a given Node number.
+ *
+ * @HtInterfaceMethod{::F_GET_SOCKET_FROM_MAP}
+ *
+ * Return the id.
+ *
+ * @param[in]     Node    The Node to translate
+ * @param[in]     State   reference to Node to socket map
+ *
+ * @return the socket id
+ *
+ */
+UINT8
+GetSocketFromMap (
+  IN       UINT8         Node,
+  IN       STATE_DATA    *State
+  )
+{
+  UINT8 Socket;
+
+  ASSERT (State->NodeToSocketDieMap != NULL);
+
+  Socket = (*State->NodeToSocketDieMap)[Node].Socket;
+  return Socket;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get a new Socket Die to Node Map.
+ *
+ * @HtInterfaceMethod{::F_NEW_NODE_AND_SOCKET_TABLES}
+ *
+ * Put the Socket Die Table in heap with a known handle.  Content will be generated as
+ * each node is discovered.
+ *
+ * @param[in,out] State global state
+ */
+VOID
+NewNodeAndSocketTables (
+  IN OUT   STATE_DATA *State
+  )
+{
+  UINT8 i;
+  UINT8 j;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  // Allocate heap for the table
+  State->SocketDieToNodeMap = NULL;
+  AllocHeapParams.RequestedBufferSize = (((MAX_SOCKETS) * (MAX_DIES)) * sizeof (SOCKET_DIE_TO_NODE_ITEM));
+  AllocHeapParams.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (HeapAllocateBuffer (&AllocHeapParams, State->ConfigHandle) == AGESA_SUCCESS) {
+    State->SocketDieToNodeMap = (SOCKET_DIE_TO_NODE_MAP)AllocHeapParams.BufferPtr;
+    // Initialize shared data structures
+    for (i = 0; i < MAX_SOCKETS; i++) {
+      for (j = 0; j < MAX_DIES; j++) {
+        (*State->SocketDieToNodeMap)[i][j].Node = HT_LIST_TERMINAL;
+        (*State->SocketDieToNodeMap)[i][j].LowCore = HT_LIST_TERMINAL;
+        (*State->SocketDieToNodeMap)[i][j].HighCore = HT_LIST_TERMINAL;
+      }
+    }
+  }
+  // Allocate heap for the table
+  State->NodeToSocketDieMap = NULL;
+  AllocHeapParams.RequestedBufferSize = (MAX_NODES * sizeof (NODE_TO_SOCKET_DIE_ITEM));
+  AllocHeapParams.BufferHandle = NODE_ID_MAP_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (HeapAllocateBuffer (&AllocHeapParams, State->ConfigHandle) == AGESA_SUCCESS) {
+    State->NodeToSocketDieMap = (NODE_TO_SOCKET_DIE_MAP)AllocHeapParams.BufferPtr;
+    // Initialize shared data structures
+    for (i = 0; i < MAX_NODES; i++) {
+      (*State->NodeToSocketDieMap)[i].Socket = HT_LIST_TERMINAL;
+      (*State->NodeToSocketDieMap)[i].Die = HT_LIST_TERMINAL;
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the minimum Northbridge frequency for the system.
+ *
+ * @HtInterfaceMethod{::F_GET_MIN_NB_CORE_FREQ}
+ *
+ * Invoke the CPU component power mgt interface.
+ *
+ * @param[in]    PlatformConfig   Platform profile/build option config structure.
+ * @param[in]    StdHeader        Config for library and services.
+ *
+ * @return Frequency in MHz.
+ *
+ */
+UINT32
+GetMinNbCoreFreq (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT32 MinSysNbFreq;
+  UINT32 MinP0NbFreq;
+
+  OptionMultiSocketConfiguration.GetMinNbCof (PlatformConfig, &MinSysNbFreq, &MinP0NbFreq, StdHeader);
+
+  ASSERT (MinSysNbFreq != 0);
+
+  return MinSysNbFreq;
+}
+
+/**
+ * @page physicalsockethowto Physical Socket Map, How To Create
+ *
+ *  To create a physical system socket map for a platform:
+ *
+ *  - Start at the Node which will be the BSP.
+ *
+ *  - Begin a breadth first enumeration of all the coherent Links between sockets
+ *  by creating a socket structure for each socket connection from the BSP.
+ *  For example, if the BSP is in socket zero and Link one connects to socket two,
+ *  create socket {0, 1, 2}.
+ *
+ *  - When all Links from the BSP are described, go to the first socket connected
+ *  to the BSP and continue the breadth first enumeration.
+ *
+ *  - It should not be necessary to describe the back Links; in the example above, there
+ *  should be no need to create {2, 1, 0} (assuming socket two connects back to
+ *  socket zero on its Link one).
+ *
+ *  - When completed:
+ *
+ *     - Every socket except the BSP's (usually zero) must be listed as a targetSocket,
+ *     at least once.  Some sockets may be listed more than once.
+ *
+ *     - There usually should be at least as many entries as Links. An exception is a
+ *     fully connected system, only the Links from the BSP are needed.
+ *
+ *     - Every socket but the last one in the breadth first order should usually have one
+ *     or more entries listing it as a currentSocket. (The last one has only back Links.)
+ *
+ *  There are no strict assumptions about the ordering of the socket structures.
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Update maps between Sockets and Nodes for a specific newly discovered node.
+ *
+ * @HtInterfaceMethod{::F_SET_NODE_TO_SOCKET_MAP}
+ *
+ * There are two methods for providing socket naming of nodes.
+ *
+ * Hardware Method (preferred):  A value strapped in hardware by the board is read and
+ * passed to this routine.
+ *
+ * Software Method:  The current node's socket is looked up, since it was
+ * previously a new node and went through this process. The link is converted to
+ * a package level link.  A user data structure describing the package level
+ * layout of the system is searched for the current node's socket and package link,
+ * and now we know the new node's socket.
+ *
+ * In either case, the Socket, Module to Node map and the Node to Socket, Module
+ * map are updated with the new node, socket, and module.
+ *
+ * Data needed to do this is passed in to the routine as arguments rather than read by this routine,
+ * so that it is not necessary to know a valid temporary route to either node at the time this code runs.
+ *
+ * @param[in] Node           Node from which a new node was discovered
+ * @param[in] CurrentNodeModule  The current node's module id in it's processor.
+ * @param[in] PackageLink    The package link for the current node's link.
+ * @param[in] NewNode        The new node's id
+ * @param[in] HardwareSocket If we use the hardware method (preferred), this is the socket of new node.
+ * @param[in] Module         The new node's module id in it's processor.
+ * @param[in] State          our State
+ */
+VOID
+SetNodeToSocketMap (
+  IN       UINT8 Node,
+  IN       UINT8 CurrentNodeModule,
+  IN       UINT8 PackageLink,
+  IN       UINT8 NewNode,
+  IN       UINT8 HardwareSocket,
+  IN       UINT8 Module,
+  IN       STATE_DATA *State
+  )
+{
+  UINT8 SourceSocket;
+  UINT8 TargetSocket;
+  SYSTEM_PHYSICAL_SOCKET_MAP *Map;
+
+  // While this code could be written to recover from a NULL socket map, AGESA cannot function without one.
+  ASSERT (State->SocketDieToNodeMap != NULL);
+
+  if (State->HtBlock->SystemPhysicalSocketMap != NULL) {
+    if (NewNode != 0) {
+      // Find the logical Node from which a new Node was discovered in the Node field of
+      // some socket.  It must already be there, Nodes are assigned ascending.
+      //
+      for (SourceSocket = 0; SourceSocket < MAX_SOCKETS; SourceSocket++) {
+        if ((*State->SocketDieToNodeMap)[SourceSocket][CurrentNodeModule].Node == Node) {
+          break;
+        }
+      }
+      // This ASSERT should be understood as "the Node did not have a match", not as a limit check on SourceSocket.
+      ASSERT (SourceSocket != MAX_SOCKETS);
+
+      // Find the sourceSocket in the CurrentSocket field, for the Link on which a new Node
+      // was discovered.  When we find an entry with that socket and Link number, update the
+      // Node for that socket.
+      //
+      if (IsPackageLinkInternal (PackageLink)) {
+        // Internal Nodes are in the same socket, don't search the physical system map.
+        TargetSocket = SourceSocket;
+      } else {
+        // Find the target socket in the physical system map.
+        Map = State->HtBlock->SystemPhysicalSocketMap;
+        while ((Map->CurrentSocket != 0xFF) &&
+               ((Map->CurrentSocket != SourceSocket) || (Map->CurrentLink != PackageLink))) {
+          Map++;
+        }
+        ASSERT (Map->CurrentSocket != 0xFF);
+        TargetSocket = Map->TargetSocket;
+      }
+    } else {
+      // The BSP (BSN, if you will) has no predecessor node from which it is discovered.
+      TargetSocket = 0;
+    }
+  } else {
+    // Use the hardware method
+    // The hardware strapped socket id is passed to us in this case.
+    TargetSocket = HardwareSocket;
+  }
+  // If the target socket, module is already mapped to something, that's not good.  Socket labeling conflict.
+    // Check that the board is strapped correctly. If not you need a SystemPhysicalSocketMap.  If you have one,
+    // check it for correctness.
+  ASSERT ((*State->SocketDieToNodeMap)[TargetSocket][Module].Node == 0xFF);
+  // Update the map for the rest of agesa
+  (*State->SocketDieToNodeMap)[TargetSocket][Module].Node = NewNode;
+  // and the node to socket map
+  ASSERT (State->NodeToSocketDieMap != NULL);
+  (*State->NodeToSocketDieMap)[NewNode].Socket = TargetSocket;
+  (*State->NodeToSocketDieMap)[NewNode].Die = Module;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Clean up the map structures after severe event has caused a fall back to 1 node.
+ *
+ * @HtInterfaceMethod{::F_CLEAN_MAPS_AFTER_ERROR}
+ *
+ * @param[in] State Our state, access to socket, node maps
+ *
+ */
+VOID
+CleanMapsAfterError (
+  IN       STATE_DATA *State
+  )
+{
+  UINTN  Socket;
+  UINTN  Module;
+  UINTN  Node;
+
+  ASSERT (State->NodeToSocketDieMap != NULL);
+  ASSERT (State->SocketDieToNodeMap != NULL);
+
+  // Clear all the socket, module items except for the socket and module containing node zero.
+  for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
+    for (Module = 0; Module < MAX_DIES; Module++) {
+      if (((*State->NodeToSocketDieMap)[0].Socket != Socket) || ((*State->NodeToSocketDieMap)[0].Die != Module)) {
+        (*State->SocketDieToNodeMap)[Socket][Module].Node = HT_LIST_TERMINAL;
+        (*State->SocketDieToNodeMap)[Socket][Module].LowCore = HT_LIST_TERMINAL;
+        (*State->SocketDieToNodeMap)[Socket][Module].HighCore = HT_LIST_TERMINAL;
+      }
+    }
+  }
+  // Clear all the node items except for node zero.
+  for (Node = 1; Node < MAX_NODES; Node++) {
+    (*State->NodeToSocketDieMap)[Node].Socket = HT_LIST_TERMINAL;
+    (*State->NodeToSocketDieMap)[Node].Die = HT_LIST_TERMINAL;
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Post Node id and other context info to AP cores via mailbox.
+ *
+ * @HtInterfaceMethod{::F_POST_MAP_TO_AP}
+ *
+ * Since Ap's can not view map until after mp communication is established,
+ * provide them with initial context info via a mailbox register. A mailbox
+ * register is one that can be written in PCI space and read in MSR space.
+ *
+ * @param[in] State Our state, access to socket, node maps
+ */
+VOID
+PostMapToAp (
+  IN       STATE_DATA *State
+  )
+{
+  UINT8 ModuleType;
+  UINT8 Module;
+  AP_MAILBOXES ApMailboxes;
+  UINT8 Node;
+  UINT32 Degree;
+  AGESA_STATUS CalledStatus;
+
+  // Dispatch any features (such as Preserve Mailbox) that need to run as soon as discovery is completed.
+  IDS_HDT_CONSOLE (CPU_TRACE, "  Dispatch CPU features after HT discovery\n");
+  CalledStatus = DispatchCpuFeatures (CPU_FEAT_AFTER_COHERENT_DISCOVERY, State->PlatformConfiguration, State->ConfigHandle);
+
+  ASSERT (State->Fabric != NULL);
+  Degree = 0;
+  // Compute the degree of the system by finding the maximum degree of any node.
+  for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+    if (State->Fabric->SysDegree[Node] > Degree) {
+      Degree = State->Fabric->SysDegree[Node];
+    }
+  }
+  // Post the information on all nodes.
+  for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+    ModuleType = 0;
+    Module = 0;
+    State->Nb->GetModuleInfo (Node, &ModuleType, &Module, State->Nb);
+    ApMailboxes.ApMailInfo.Info = 0;
+    ApMailboxes.ApMailInfo.Fields.Node = Node;
+    ApMailboxes.ApMailInfo.Fields.Socket = State->HtInterface->GetSocketFromMap (Node, State);
+    ApMailboxes.ApMailInfo.Fields.ModuleType = ModuleType;
+    ApMailboxes.ApMailInfo.Fields.Module = Module;
+    ApMailboxes.ApMailExtInfo.Info = 0;
+    ApMailboxes.ApMailExtInfo.Fields.SystemDegree = Degree;
+    // other fields of the extended info are used during ap init, and will be initialized at that time.
+    State->Nb->PostMailbox (Node, ApMailboxes, State->Nb);
+  }
+  // Now that the mailboxes have been initialized, cache the info on the BSC.  The APs
+  // will cache during heap initialization.
+  CacheApMailbox (State->ConfigHandle);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceGeneral.h b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceGeneral.h
new file mode 100644
index 0000000000..1e5930fb9f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceGeneral.h
@@ -0,0 +1,162 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Internal access to HT Interface, general purpose features.
+ *
+ * This file provides definitions used by HT internal modules.  The
+ * external HT interface (in agesa.h) is accessed using these methods.
+ * This keeps the HT Feature implementations abstracted from the HT
+ * external interface.
+ *
+ * This file includes the interface support which is not removed with
+ * various build options.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $        @e  \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_INTERFACE_GENERAL_H_
+#define _HT_INTERFACE_GENERAL_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         Prototypes to Interface from Feature Code
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Is PackageLink an Internal Link?
+ */
+BOOLEAN
+IsPackageLinkInternal (
+  IN       UINT8  PackageLink
+  );
+
+/**
+ * Get the Socket number for a given Node number.
+ *
+ */
+UINT8
+GetSocketFromMap (
+  IN       UINT8         Node,
+  IN       STATE_DATA    *State
+  );
+
+/**
+ * Ignore a Link.
+ *
+ */
+FINAL_LINK_STATE
+GetIgnoreLink (
+  IN       UINT8        Node,
+  IN       UINT8        Link,
+  IN       IGNORE_LINK  *NbIgnoreLinkList,
+  IN       STATE_DATA   *State
+  );
+
+/**
+ * Get a new Socket Die to Node Map.
+ *
+ */
+VOID
+NewNodeAndSocketTables (
+  IN OUT   STATE_DATA *State
+  );
+
+/**
+ * Get the minimum Northbridge frequency for the system.
+ *
+ */
+UINT32
+GetMinNbCoreFreq (
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  );
+
+/**
+ * Fill in the socket's Node id when a processor is discovered in that socket.
+ *
+ */
+VOID
+SetNodeToSocketMap (
+  IN       UINT8 Node,
+  IN       UINT8 CurrentNodeModule,
+  IN       UINT8 PackageLink,
+  IN       UINT8 NewNode,
+  IN       UINT8 HardwareSocket,
+  IN       UINT8 Module,
+  IN       STATE_DATA *State
+  );
+
+/**
+ * Clean up the map structures after severe event has caused a fall back to 1 node.
+ *
+ */
+VOID
+CleanMapsAfterError (
+  IN       STATE_DATA *State
+  );
+
+/**
+ * Post Node id and other context info to AP cores via mailbox.
+ *
+ */
+VOID
+PostMapToAp (
+  IN       STATE_DATA *State
+  );
+
+#endif  /* _HT_INTERFACE_GENERAL_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceNonCoherent.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceNonCoherent.c
new file mode 100644
index 0000000000..c075e15271
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceNonCoherent.c
@@ -0,0 +1,394 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * External Interface implementation for non-coherent features.
+ *
+ * Contains routines for accessing the interface to the client BIOS,
+ * for non-coherent features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htInterfaceNonCoherent.h"
+#include "htNb.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_HTINTERFACENONCOHERENT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_ZERO_32 ((UINT32)0)
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get Manual BUID assignment list.
+ *
+ * @HtInterfaceMethod{::F_GET_MANUAL_BUID_SWAP_LIST}
+ *
+ * This routine is called every time a non-coherent chain is processed.  BUID
+ * assignment may be controlled explicitly on a non-coherent chain. Swaps controls
+ * the BUID assignment and FinalIds provides the device to device Linking.  Device
+ * orientation can be detected automatically, or explicitly.  See documentation for
+ * more details.
+ *
+ * If a manual swap list is not supplied, automatic non-coherent init assigns BUIDs
+ * starting at 1 and incrementing sequentially based on each device's unit count.
+ *
+ * @param[in]    Node    The Node on which this chain is located
+ * @param[in]    Link    The Link on the host for this chain
+ * @param[out]   List    supply a pointer to a list.
+ *                       List is NOT valid unless routine returns TRUE.
+ * @param[in]    State   the input data
+ *
+ * @retval      TRUE     use a manual list
+ * @retval      FALSE    initialize the Link automatically
+ */
+BOOLEAN
+GetManualBuidSwapList (
+  IN       UINT8            Node,
+  IN       UINT8            Link,
+     OUT   BUID_SWAP_LIST   **List,
+  IN       STATE_DATA       *State
+  )
+{
+  MANUAL_BUID_SWAP_LIST *p;
+  BOOLEAN result;
+  UINT8 Socket;
+  UINT8 PackageLink;
+
+  ASSERT ((Node < MAX_NODES) && (List != NULL));
+
+  result = FALSE;
+  Socket = State->HtInterface->GetSocketFromMap (Node, State);
+  PackageLink = State->Nb->GetPackageLink (Node, Link, State->Nb);
+
+  if (State->HtBlock->ManualBuidSwapList != NULL) {
+    p = State->HtBlock->ManualBuidSwapList;
+
+    while (p->Socket != HT_LIST_TERMINAL) {
+      if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) &&
+          ((p->Link == PackageLink) || (p->Link == HT_LIST_MATCH_ANY))) {
+        // Found a match implies TRUE, ignore the Link
+        result = TRUE;
+        *List = &(p->SwapList);
+        break;
+      } else {
+        p++;
+      }
+    }
+  }
+  // List is not valid if Result is FALSE.
+  return result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Override capabilities of a device.
+ *
+ * @HtInterfaceMethod{::F_GET_DEVICE_CAP_OVERRIDE}
+ *
+ * This routine is called once for every Link on every IO device.  Update the width
+ * and frequency capability if needed for this device.  This is used along with
+ * device capabilities, the limit call backs, and northbridge limits to compute the
+ * default settings.  The components of the device's PCI config address are provided,
+ * so its settings can be consulted if need be. The input width and frequency are the
+ * reported device capabilities.
+ *
+ * @param[in]     HostNode      The Node on which this chain is located
+ * @param[in]     HostLink      The Link on the host for this chain
+ * @param[in]     Depth         The Depth in the I/O chain from the Host
+ * @param[in]     PciAddress    The Device's PCI config address (for callout)
+ * @param[in]     DevVenId      The Device's PCI Vendor + Device ID (offset 0x00)
+ * @param[in]     Revision      The Device's PCI Revision
+ * @param[in]     Link          The Device's Link number (0 or 1)
+ * @param[in,out] LinkWidthIn   modify to change the Link Width In
+ * @param[in,out] LinkWidthOut  modify to change the Link Width Out
+ * @param[in,out] FreqCap       modify to change the Link's frequency capability
+ * @param[in,out] Clumping      modify to change unit id clumping capability
+ * @param[in]     State         the input data and config header
+ *
+ */
+VOID
+GetDeviceCapOverride (
+  IN       UINT8       HostNode,
+  IN       UINT8       HostLink,
+  IN       UINT8       Depth,
+  IN       PCI_ADDR    PciAddress,
+  IN       UINT32      DevVenId,
+  IN       UINT8       Revision,
+  IN       UINT8       Link,
+  IN OUT   UINT8       *LinkWidthIn,
+  IN OUT   UINT8       *LinkWidthOut,
+  IN OUT   UINT32      *FreqCap,
+  IN OUT   UINT32      *Clumping,
+  IN       STATE_DATA  *State
+  )
+{
+  DEVICE_CAP_OVERRIDE *p;
+  UINT8 HostSocket;
+  UINT8 PackageLink;
+  DEVICE_CAP_CALLOUT_PARAMS CalloutParams;
+  AGESA_STATUS CalloutStatus;
+
+  ASSERT ((HostNode < MAX_NODES) && (Depth < 32) && ((Link == 0) || (Link == 1)));
+
+  HostSocket = State->HtInterface->GetSocketFromMap (HostNode, State);
+  PackageLink = State->Nb->GetPackageLink (HostNode, HostLink, State->Nb);
+
+  if (State->HtBlock->DeviceCapOverrideList != NULL) {
+    p = State->HtBlock->DeviceCapOverrideList;
+
+    while (p->HostSocket != HT_LIST_TERMINAL) {
+      if (((p->HostSocket == HostSocket) || (p->HostSocket == HT_LIST_MATCH_ANY)) &&
+          ((p->HostLink == PackageLink) || (p->HostLink == HT_LIST_MATCH_ANY)) &&
+          ((p->Depth == Depth) || (p->Depth == HT_LIST_MATCH_ANY)) &&
+          ((p->Link == Link) || (p->Link == HT_LIST_MATCH_ANY)) &&
+          // Found a potential match. Check the additional optional matches.
+          ((p->Options.IsCheckDevVenId == 0) || (p->DevVenId == DevVenId)) &&
+          ((p->Options.IsCheckRevision == 0) || (p->Revision == Revision))) {
+        //
+        // Found a match.  Check what override actions are desired.
+        // Unlike the PCB limit routines, which handle the info returned,
+        // deviceCapOverride is actually overriding the settings, so we need
+        // to check that the field actually has an update.
+        // The Callout is a catch all for situations the data is not up to handling.
+        // It is expected, but not enforced, that either the data overrides are used,
+        // or the callout is used, rather than both.
+        //
+        if (p->Options.IsOverrideWidthIn != 0) {
+          *LinkWidthIn = p->LinkWidthIn;
+        }
+        if (p->Options.IsOverrideWidthOut != 0) {
+          *LinkWidthOut = p->LinkWidthOut;
+        }
+        if (p->Options.IsOverrideFreq != 0) {
+          *FreqCap = p->FreqCap;
+        }
+        if (p->Options.IsOverrideClumping != 0) {
+          *Clumping = p->Clumping;
+        }
+        if (p->Options.IsDoCallout != 0) {
+          //
+          // Pass the actual info being matched, not the matched struct data.
+          // This callout is expected to be built in as part of the options file, and does not use the
+          // callout interface, even though we use the consistent interface declaration for the routine.
+          // So, the first two int parameters have no meaning in this case.
+          // It is not meaningful for the callout to have any status but Success.
+          //
+          CalloutParams.HostSocket = HostSocket;
+          CalloutParams.HostLink = PackageLink;
+          CalloutParams.Depth = Depth;
+          CalloutParams.DevVenId = DevVenId;
+          CalloutParams.Revision = Revision;
+          CalloutParams.Link = Link;
+          CalloutParams.PciAddress = PciAddress;
+          CalloutParams.LinkWidthIn = LinkWidthIn;
+          CalloutParams.LinkWidthOut = LinkWidthOut;
+          CalloutParams.FreqCap = FreqCap;
+          CalloutParams.Clumping = Clumping;
+          CalloutParams.StdHeader = *((AMD_CONFIG_PARAMS *) (State->ConfigHandle));
+          CalloutStatus = p->Callout (UNUSED_ZERO_32, UNUSED_ZERO_32, (VOID *) &CalloutParams);
+          ASSERT (CalloutStatus == AGESA_SUCCESS);
+        }
+        break;
+      } else {
+        p++;
+      }
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get limits for non-coherent Links.
+ *
+ * @HtInterfaceMethod{::F_GET_IO_PCB_LIMITS}
+ *
+ * For each non-coherent connection this routine is called once.  Update the
+ * frequency and width if needed for this Link (usually based on board restriction).
+ * This is used with device capabilities, device overrides, and northbridge limits to
+ * compute the default settings. The input width and frequency are valid, but do not
+ * necessarily reflect the minimum setting that will be chosen.
+ *
+ * @param[in]     HostNode                   The Node on which this Link is located
+ * @param[in]     HostLink                   The Link about to be initialized
+ * @param[in]     Depth                      The Depth in the I/O chain from the Host
+ * @param[in,out] DownstreamLinkWidthLimit   modify to change the Link Width In
+ * @param[in,out] UpstreamLinkWidthLimit     modify to change the Link Width Out
+ * @param[in,out] PcbFreqCap                 modify to change the Link's frequency capability
+ * @param[in]     State                      the input data
+ */
+VOID
+GetIoPcbLimits (
+  IN       UINT8        HostNode,
+  IN       UINT8        HostLink,
+  IN       UINT8        Depth,
+  IN OUT   UINT8        *DownstreamLinkWidthLimit,
+  IN OUT   UINT8        *UpstreamLinkWidthLimit,
+  IN OUT   UINT32       *PcbFreqCap,
+  IN       STATE_DATA   *State
+  )
+{
+  IO_PCB_LIMITS *p;
+  UINT8 Socket;
+  UINT8 PackageLink;
+
+  ASSERT ((HostNode < MAX_NODES) && (HostLink < MAX_NODES));
+
+  Socket = State->HtInterface->GetSocketFromMap (HostNode, State);
+  PackageLink = State->Nb->GetPackageLink (HostNode, HostLink, State->Nb);
+
+  if (State->HtBlock->IoPcbLimitsList != NULL) {
+    p = State->HtBlock->IoPcbLimitsList;
+
+    while (p->HostSocket != HT_LIST_TERMINAL) {
+      if (((p->HostSocket == Socket) || (p->HostSocket == HT_LIST_MATCH_ANY)) &&
+          ((p->HostLink == PackageLink) || (p->HostLink == HT_LIST_MATCH_ANY)) &&
+          ((p->Depth == Depth) || (p->Depth == HT_LIST_MATCH_ANY))) {
+        // Found a match, return the override info
+        *DownstreamLinkWidthLimit = p->DownstreamLinkWidthLimit;
+        *UpstreamLinkWidthLimit = p->UpstreamLinkWidthLimit;
+        *PcbFreqCap = p->PcbFreqCap;
+        break;
+      } else {
+        p++;
+      }
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Manually control bus number assignment.
+ *
+ * @HtInterfaceMethod{::F_GET_OVERRIDE_BUS_NUMBERS}
+ *
+ * This routine is called every time a non-coherent chain is processed.  If a system
+ * can not use the auto Bus numbering feature for non-coherent chain bus assignments,
+ * this routine can provide explicit control.  For each chain, provide the bus number
+ * range to use.
+ *
+ * The outputs SecBus and SubBus are not valid unless this routine returns TRUE
+ *
+ * @param[in]     Node      The Node on which this chain is located
+ * @param[in]     Link      The Link on the host for this chain
+ * @param[out]    SecBus    Secondary Bus number for this non-coherent chain
+ * @param[out]    SubBus    Subordinate Bus number
+ * @param[in]     State     the input data
+ *
+ * @retval        TRUE      this routine is supplying the bus numbers.
+ * @retval        FALSE     use auto Bus numbering, bus outputs not valid.
+ */
+BOOLEAN
+GetOverrideBusNumbers (
+  IN       UINT8        Node,
+  IN       UINT8        Link,
+     OUT   UINT8        *SecBus,
+     OUT   UINT8        *SubBus,
+  IN       STATE_DATA   *State
+  )
+{
+  OVERRIDE_BUS_NUMBERS *p;
+  BOOLEAN result;
+  UINT8 Socket;
+  UINT8 PackageLink;
+
+  ASSERT ((Node < MAX_NODES) && (Link < MAX_NODES));
+
+  result = FALSE;
+  Socket = State->HtInterface->GetSocketFromMap (Node, State);
+  PackageLink = State->Nb->GetPackageLink (Node, Link, State->Nb);
+
+  if (State->HtBlock->OverrideBusNumbersList != NULL) {
+    p = State->HtBlock->OverrideBusNumbersList;
+
+    while (p->Socket != HT_LIST_TERMINAL) {
+      if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) &&
+          ((p->Link == PackageLink) || (p->Link == HT_LIST_MATCH_ANY))) {
+        // Found a match, return the bus overrides
+        *SecBus = p->SecBus;
+        *SubBus = p->SubBus;
+        ASSERT (*SubBus > *SecBus);
+        result = TRUE;
+        break;
+      } else {
+        p++;
+      }
+    }
+  }
+  // SecBus, SubBus are not valid if Result is FALSE.
+  return result;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceNonCoherent.h b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceNonCoherent.h
new file mode 100644
index 0000000000..278ffb0d21
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htInterfaceNonCoherent.h
@@ -0,0 +1,138 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Internal access to HT Interface, for non-coherent features.
+ *
+ * This file provides definitions used by HT internal modules.  The
+ * external HT interface (in agesa.h) is accessed using these methods.
+ * This keeps the HT Feature implementations abstracted from the HT
+ * interface.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $        @e  \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_INTERFACE_NONCOHERENT_H_
+#define _HT_INTERFACE_NONCOHERENT_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         Prototypes to Interface from Feature Code
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Manually control bus number assignment.
+ *
+ */
+BOOLEAN
+GetOverrideBusNumbers (
+  IN       UINT8        Node,
+  IN       UINT8        Link,
+     OUT   UINT8        *SecBus,
+     OUT   UINT8        *SubBus,
+  IN       STATE_DATA   *State
+  );
+
+/**
+ * Get Manual BUID assignment list.
+ *
+ */
+BOOLEAN
+GetManualBuidSwapList (
+  IN       UINT8            Node,
+  IN       UINT8            Link,
+     OUT   BUID_SWAP_LIST   **List,
+  IN       STATE_DATA       *State
+  );
+
+/**
+ * Override capabilities of a device.
+ *
+ */
+
+VOID
+GetDeviceCapOverride (
+  IN       UINT8       HostNode,
+  IN       UINT8       HostLink,
+  IN       UINT8       Depth,
+  IN       PCI_ADDR    PciAddress,
+  IN       UINT32      DevVenId,
+  IN       UINT8       Revision,
+  IN       UINT8       Link,
+  IN OUT   UINT8       *LinkWidthIn,
+  IN OUT   UINT8       *LinkWidthOut,
+  IN OUT   UINT32      *FreqCap,
+  IN OUT   UINT32      *Clumping,
+  IN       STATE_DATA  *State
+  );
+
+/**
+ * Get limits for non-coherent Links.
+ *
+ */
+VOID
+GetIoPcbLimits (
+  IN       UINT8        HostNode,
+  IN       UINT8        HostLink,
+  IN       UINT8        Depth,
+  IN OUT   UINT8        *DownstreamLinkWidthLimit,
+  IN OUT   UINT8        *UpstreamLinkWidthLimit,
+  IN OUT   UINT32       *PcbFreqCap,
+  IN       STATE_DATA   *State
+  );
+
+#endif  /* _HT_INTERFACE_NONCOHERENT_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htMain.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htMain.c
new file mode 100644
index 0000000000..43eb4f1f76
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htMain.c
@@ -0,0 +1,579 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HyperTransport features and sequence implementation.
+ *
+ * Implements the external AmdHtInitialize entry point.
+ * Contains routines for directing the sequence of available features.
+ * Mostly, but not exclusively, AGESA_TESTPOINT invocations should be
+ * contained in this file, and not in the feature code.
+ *
+ * From a build option perspective, it may be that a few lines could be removed
+ * from compilation in this file for certain options.  It is considered that
+ * the code savings from this are too small to be of concern and this file
+ * should not have any explicit build option implementation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNb.h"
+#include "heapManager.h"
+#include "cpuServices.h"
+#include "OptionsHt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_HTMAIN_FILECODE
+#define APIC_Base_BSP    8
+#define APIC_Base        0x1b
+
+extern OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+BOOLEAN
+STATIC
+IsBootCore (
+  IN       STATE_DATA    *State
+  );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Update maps with the core range for each module.
+ *
+ * Cores are numbered relative to a Processor, but sometimes there is a need to know the
+ * starting and ending core ids on a particular node.  This same info is also useful for
+ * supporting the Core count on a node other than the one currently executing.
+ *
+ * For each Processor, get the core count of each node using the family specific PCI core count
+ * interface. The order of cores in a processor, and whether it is special for the BSP is family
+ * specific.  But whether the processor orders core ids by module or node, iterate in the right
+ * order and use the counts to determine each start and end range.
+ *
+ * Update compute unit status for each node.
+ *
+ * @param[in]   State    number of Nodes discovered.
+*/
+VOID
+STATIC
+UpdateCoreRanges (
+  IN       STATE_DATA    *State
+    )
+{
+  UINT8 Node;
+  UINT8 ProcessorCores;
+  UINT8 ModuleCoreCount[MAX_DIES];
+  UINT8 Socket;
+  UINT8 Module;
+
+  ASSERT (State->SocketDieToNodeMap != NULL);
+  ASSERT (State->NodeToSocketDieMap != NULL);
+
+  for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
+    // Is a Processor present in Socket?
+    if ((*State->SocketDieToNodeMap)[Socket][0].Node != HT_LIST_TERMINAL) {
+      // Get all the Module core counts for this processor
+      // Note that the core counts are 1 based counts.
+      // Since Compute Unit info is not module ordering dependent, write it now.
+      for (Module = 0; Module < MAX_DIES; Module++) {
+        if ((*State->SocketDieToNodeMap)[Socket][Module].Node != HT_LIST_TERMINAL) {
+          ModuleCoreCount[Module] = State->Nb->GetNumCoresOnNode ((*State->SocketDieToNodeMap)[Socket][Module].Node, State->Nb);
+          (*State->SocketDieToNodeMap)[Socket][Module].EnabledComputeUnits =
+            State->Nb->GetEnabledComputeUnits ((*State->SocketDieToNodeMap)[Socket][Module].Node, State->Nb);
+          (*State->SocketDieToNodeMap)[Socket][Module].DualCoreComputeUnits =
+            State->Nb->GetDualCoreComputeUnits ((*State->SocketDieToNodeMap)[Socket][Module].Node, State->Nb);
+        } else {
+          ModuleCoreCount[Module] = 0;
+        }
+      }
+      // Determine the core ordering rule for this processor.
+      if ((((*State->NodeToSocketDieMap)[0].Socket == Socket) && State->Nb->IsOrderBSPCoresByNode) ||
+          (!State->Nb->IsOrderCoresByModule)) {
+        // Order core ranges on this processor by Node Id.
+        ProcessorCores = 0;
+        for (Node = 0; Node < State->Nb->GetNodeCount (State->Nb); Node++) {
+          // Is this node a module in this processor?
+          if ((*State->NodeToSocketDieMap)[Node].Socket == Socket) {
+            Module = (*State->NodeToSocketDieMap)[Node].Die;
+            if (ModuleCoreCount[Module] != 0) {
+              (*State->SocketDieToNodeMap)[Socket][Module].LowCore = ProcessorCores;
+              (*State->SocketDieToNodeMap)[Socket][Module].HighCore = ProcessorCores + (ModuleCoreCount[Module] - 1);
+              IDS_HDT_CONSOLE (
+                HT_TRACE,
+                (IsBootCore (State) ?
+                 "Topology: Socket %d, Die %d, is Node %d, with Cores %d thru %d. Compute Unit status (0x%x,0x%x).\n" :
+                 ""),
+                Socket,
+                Module,
+                Node,
+                (*State->SocketDieToNodeMap)[Socket][Module].LowCore,
+                (*State->SocketDieToNodeMap)[Socket][Module].HighCore,
+                (*State->SocketDieToNodeMap)[Socket][Module].EnabledComputeUnits,
+                (*State->SocketDieToNodeMap)[Socket][Module].DualCoreComputeUnits
+                );
+              ProcessorCores = ProcessorCores + ModuleCoreCount[Module];
+            }
+          }
+        }
+      } else {
+        // Order core ranges in this processor by Module Id.
+        ProcessorCores = 0;
+        for (Module = 0; Module < MAX_DIES; Module++) {
+          if (ModuleCoreCount[Module] != 0) {
+            (*State->SocketDieToNodeMap)[Socket][Module].LowCore = ProcessorCores;
+            (*State->SocketDieToNodeMap)[Socket][Module].HighCore = ProcessorCores + (ModuleCoreCount[Module] - 1);
+              IDS_HDT_CONSOLE (
+                HT_TRACE,
+                (IsBootCore (State) ?
+                 "Topology: Socket %d, Die %d, is Node %d, with Cores %d thru %d. Compute Unit status (0x%x,0x%x).\n" :
+                 ""),
+                Socket,
+                Module,
+                (*State->SocketDieToNodeMap)[Socket][Module].Node,
+                (*State->SocketDieToNodeMap)[Socket][Module].LowCore,
+                (*State->SocketDieToNodeMap)[Socket][Module].HighCore,
+                (*State->SocketDieToNodeMap)[Socket][Module].EnabledComputeUnits,
+                (*State->SocketDieToNodeMap)[Socket][Module].DualCoreComputeUnits
+                );
+            ProcessorCores = ProcessorCores + ModuleCoreCount[Module];
+          }
+        }
+      }
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Complete the coherent init with any system level initialization.
+ *
+ * Find the total number of cores and update the number of Nodes and cores in all cpus.
+ * Limit cpu config access to installed cpus.
+ *
+ * @param[in]   State    number of Nodes discovered.
+*/
+VOID
+STATIC
+FinalizeCoherentInit (
+  IN       STATE_DATA    *State
+    )
+{
+  UINT8 Node;
+  UINT8 TotalCores;
+
+  TotalCores = 0;
+
+  for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+    TotalCores = TotalCores + State->Nb->GetNumCoresOnNode (Node, State->Nb);
+  }
+
+  for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+    State->Nb->SetTotalNodesAndCores (Node, State->NodesDiscovered + 1, TotalCores, State->Nb);
+  }
+
+  // Set all nodes to limit config space based on node count, after all nodes have a valid count.
+  // (just being cautious, probably we could combine the loops.)
+  for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+    State->Nb->LimitNodes (Node, State->Nb);
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize the coherent fabric.
+ *
+ * Perform discovery and initialization of the coherent fabric, for builds including
+ * support for multiple coherent nodes.
+ *
+ * @param[in]   State   global state
+ */
+VOID
+STATIC
+CoherentInit (
+  IN OUT   STATE_DATA    *State
+  )
+{
+  UINT8 i;
+  UINT8 j;
+  UINT8 ModuleType;
+  UINT8 Module;
+  UINT8 HardwareSocket;
+  COHERENT_FABRIC Fabric;
+
+  // Because Node 0, the BSP, is not discovered, initialize info about it specially here.
+  // Allocate Socket Die Map.
+  // While the BSP is always capable of being the only processor in the system, call the
+  // IsExceededCapable method to make sure the BSP's capability is included in the aggregate system
+  // capability. We don't care to check the return value.
+  //
+  State->Fabric = &Fabric;
+  State->NodesDiscovered = 0;
+  State->TotalLinks = 0;
+  State->SysMpCap = MAX_NODES;
+  State->Nb->IsExceededCapable (0, State, State->Nb);
+  HardwareSocket = State->Nb->GetSocket (0, 0, State->Nb);
+  ModuleType = 0;
+  Module = 0;
+  State->Nb->GetModuleInfo (0, &ModuleType, &Module, State->Nb);
+  // No predecessor info for BSP, so pass 0xFF for those parameters.
+  State->HtInterface->SetNodeToSocketMap (0xFF, 0xFF, 0xFF, 0, HardwareSocket, Module, State);
+
+  // Initialize system state data structures
+  for (i = 0; i < MAX_NODES; i++) {
+    State->Fabric->SysDegree[i] = 0;
+    for (j = 0; j < MAX_NODES; j++) {
+      State->Fabric->SysMatrix[i][j] = 0;
+    }
+  }
+
+  //
+  // Call the coherent init features
+  //
+
+  // Discovery
+  State->HtFeatures->CoherentDiscovery (State);
+  State->HtInterface->PostMapToAp (State);
+  // Topology matching and Routing
+  AGESA_TESTPOINT (TpProcHtTopology, State->ConfigHandle);
+  State->HtFeatures->LookupComputeAndLoadRoutingTables (State);
+  State->HtFeatures->MakeHopCountTable (State);
+
+  // UpdateCoreRanges requires the other maps to be initialized, and the node count set.
+  FinalizeCoherentInit (State);
+  UpdateCoreRanges (State);
+  State->Fabric = NULL;
+}
+
+/***************************************************************************
+ ***                       Non-coherent init code                        ***
+ ***                             Algorithms                              ***
+ ***************************************************************************/
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize the non-coherent fabric.
+ *
+ * Begin with the Compat Link on the BSP, then find and initialize all other
+ * non-coherent chains.
+ *
+ * @param[in]   State    our global state
+ */
+VOID
+STATIC
+NcInit (
+  IN       STATE_DATA    *State
+  )
+{
+  UINT8 Node;
+  UINT8 Link;
+  UINT8 CompatLink;
+  FINAL_LINK_STATE FinalLinkState;
+
+  // Initialize the southbridge chain.
+  State->AutoBusCurrent = State->HtBlock->AutoBusStart;
+  State->UsedCfgMapEntries = 0;
+  CompatLink = State->Nb->ReadSouthbridgeLink (State->Nb);
+  State->HtFeatures->ProcessLink (0, CompatLink, TRUE, State);
+
+  // Find and initialize all other non-coherent chains.
+  for (Node = 0; Node <= State->NodesDiscovered; Node++) {
+    for (Link = 0; Link < State->Nb->MaxLinks; Link++) {
+      // Skip the Link, if any of these tests indicate
+      FinalLinkState = State->HtInterface->GetIgnoreLink (Node, Link, State->Nb->DefaultIgnoreLinkList, State);
+      if (FinalLinkState == UNMATCHED) {
+        if ( !((Node == 0) && (Link == CompatLink))) {
+          if ( !(State->Nb->ReadTrueLinkFailStatus (Node, Link, State, State->Nb))) {
+            if (State->Nb->VerifyLinkIsNonCoherent (Node, Link, State->Nb)) {
+              State->HtFeatures->ProcessLink (Node, Link, FALSE, State);
+            }
+          }
+        }
+      }
+    }
+  }
+}
+
+/***************************************************************************
+ ***                            Link Optimization                        ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Optimize Link Features.
+ *
+ * Based on Link capabilities, apply optimization rules to come up with the best
+ * settings, including several external limit decision from the interface. This includes
+ * handling of subLinks.  Finally, after the port list data is updated, set the hardware
+ * state for all Links.
+ *
+ * @param[in] State our global state
+ */
+VOID
+STATIC
+LinkOptimization (
+  IN       STATE_DATA *State
+  )
+{
+  AGESA_TESTPOINT (TpProcHtOptGather, State->ConfigHandle);
+  State->HtFeatures->GatherLinkData (State);
+
+  AGESA_TESTPOINT (TpProcHtOptRegang, State->ConfigHandle);
+  State->HtFeatures->RegangLinks (State);
+
+  AGESA_TESTPOINT (TpProcHtOptLinks, State->ConfigHandle);
+  State->HtFeatures->SelectOptimalWidthAndFrequency (State);
+
+  // A likely cause of mixed Retry settings on coherent links is sublink ratio balancing
+  // so check this after doing the sublinks.
+  AGESA_TESTPOINT (TpProcHtOptSubLinks, State->ConfigHandle);
+  State->HtFeatures->SubLinkRatioFixup (State);
+  if (State->HtFeatures->IsCoherentRetryFixup (State)) {
+    // Fix sublinks again within HT1 only frequencies, as ratios may be invalid again.
+    State->HtFeatures->SubLinkRatioFixup (State);
+  }
+
+  AGESA_TESTPOINT (TpProcHtOptFinish, State->ConfigHandle);
+  State->HtFeatures->SetLinkData (State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Handle system and performance tunings.
+ *
+ * Including traffic distribution, fifo and
+ * buffer tuning that can't be placed in the register table,
+ * and special config tunings.
+ *
+ * @param[in] State    Total Nodes, port list data
+ */
+VOID
+STATIC
+Tuning (
+  IN       STATE_DATA *State
+  )
+{
+  UINT8 Node;
+
+  // For each Node, invoke northbridge specific buffer tunings that can not be done in reg table.
+  //
+  AGESA_TESTPOINT (TpProcHtTuning, State->ConfigHandle);
+  for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+    State->Nb->BufferOptimizations (Node, State, State->Nb);
+  }
+
+  // See if traffic distribution can be done and do it if so.
+  //
+  AGESA_TESTPOINT (TpProcHtTrafficDist, State->ConfigHandle);
+  State->HtFeatures->TrafficDistribution (State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize the Node and Socket maps for an AP Core.
+ *
+ * In each core's local heap, create a Node to Socket map and a Socket/Module to Node map.
+ * The mapping is filled in by reading the AP Mailboxes from PCI config on each node.
+ *
+ * @param[in]    State    global state, input data
+ *
+ */
+VOID
+STATIC
+InitApMaps (
+  IN       STATE_DATA *State
+  )
+{
+  UINT8 Node;
+  AP_MAIL_INFO NodeApMailBox;
+
+  // There is no option to not have socket - node maps, if they aren't allocated that is a fatal bug.
+  ASSERT (State->SocketDieToNodeMap != NULL);
+  ASSERT (State->NodeToSocketDieMap != NULL);
+
+  for (Node = 0; Node < State->Nb->GetNodeCount (State->Nb); Node++) {
+    NodeApMailBox = State->Nb->RetrieveMailbox (Node, State->Nb);
+    (*State->SocketDieToNodeMap)[NodeApMailBox.Fields.Socket][NodeApMailBox.Fields.Module].Node = Node;
+    (*State->NodeToSocketDieMap)[Node].Socket = (UINT8)NodeApMailBox.Fields.Socket;
+    (*State->NodeToSocketDieMap)[Node].Die = (UINT8)NodeApMailBox.Fields.Module;
+  }
+  // This requires the other maps to be initialized.
+  UpdateCoreRanges (State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Is the currently running core the BSC?
+ *
+ * Determine whether the init steps for BSC or AP core should be run.
+ *
+ * @param[in]    State    global state, input data
+ *
+ * @retval       TRUE    This is the boot core.
+ * @retval       FALSE   This is not the boot core.
+ */
+BOOLEAN
+STATIC
+IsBootCore (
+  IN       STATE_DATA    *State
+  )
+{
+  UINT64 Value;
+
+  LibAmdMsrRead (APIC_Base, &Value, State->ConfigHandle);
+
+  return ((BOOLEAN) (((UINT32) (Value & 0xFFFFFFFF) & ((UINT32)1 << APIC_Base_BSP)) != 0));
+}
+
+/***************************************************************************
+ ***                            HT Initialize                             ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * The top level external interface for Hypertransport Initialization.
+ *
+ * Create our initial internal state, initialize the coherent fabric,
+ * initialize the non-coherent chains, and perform any required fabric tuning or
+ * optimization.
+ *
+ * @param[in]   StdHeader              Opaque handle to standard config header
+ * @param[in]   PlatformConfiguration  The platform configuration options.
+ * @param[in]   AmdHtInterface         HT Interface structure.
+ *
+ * @retval      AGESA_SUCCESS     Only information events logged.
+ * @retval      AGESA_ALERT       Sync Flood or CRC error logged.
+ * @retval      AGESA_WARNING     Example: expected capability not found
+ * @retval      AGESA_ERROR       logged events indicating some devices may not be available
+ * @retval      AGESA_FATAL       Mixed Family or MP capability mismatch
+ *
+ */
+AGESA_STATUS
+AmdHtInitialize (
+  IN       AMD_CONFIG_PARAMS      *StdHeader,
+  IN       PLATFORM_CONFIGURATION *PlatformConfiguration,
+  IN       AMD_HT_INTERFACE       *AmdHtInterface
+  )
+{
+  STATE_DATA State;
+  NORTHBRIDGE Nb;
+  HT_FEATURES HtFeatures;
+  HT_INTERFACE HtInterface;
+  AGESA_STATUS DeallocateStatus;
+  AP_MAIL_INFO ApMailboxInfo;
+  UINT8 ApNode;
+
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  State.HtBlock = AmdHtInterface;
+  State.ConfigHandle = StdHeader;
+  State.PlatformConfiguration = PlatformConfiguration;
+
+  // Get the current HT internal interface (to HtBlock data)
+  NewHtInterface (&HtInterface, State.ConfigHandle);
+  State.HtInterface = &HtInterface;
+
+  // Get the current HT Feature Set
+  NewHtFeatures (&HtFeatures, State.ConfigHandle);
+  State.HtFeatures = &HtFeatures;
+
+  // Initialize from static options
+  State.IsUsingRecoveryHt = OptionHtConfiguration.IsUsingRecoveryHt;
+  State.IsSetHtCrcFlood = OptionHtConfiguration.IsSetHtCrcFlood;
+  State.IsUsingUnitIdClumping = OptionHtConfiguration.IsUsingUnitIdClumping;
+
+  // Initialize for status and event output
+  State.MaxEventClass = AGESA_SUCCESS;
+
+  // Allocate permanent heap structs that are interfaces to other AGESA services.
+  State.HtInterface->NewNodeAndSocketTables (&State);
+
+  if (IsBootCore (&State)) {
+    AGESA_TESTPOINT (TpProcHtEntry, State.ConfigHandle);
+    // Allocate Bsp only interface heap structs.
+    State.HtInterface->NewHopCountTable (&State);
+    // Allocate heap for our temporary working space.
+    AllocHeapParams.RequestedBufferSize = (sizeof (PORT_DESCRIPTOR) * (MAX_PLATFORM_LINKS * 2));
+    AllocHeapParams.BufferHandle = HT_STATE_DATA_HANDLE;
+    AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+    if (HeapAllocateBuffer (&AllocHeapParams, State.ConfigHandle) == AGESA_SUCCESS) {
+      State.PortList = (PORT_LIST)AllocHeapParams.BufferPtr;
+      // Create the BSP's northbridge.
+      NewNorthBridge (0, &State, &Nb);
+      State.Nb = &Nb;
+
+      CoherentInit (&State);
+      NcInit (&State);
+      LinkOptimization (&State);
+      Tuning (&State);
+
+      DeallocateStatus = HeapDeallocateBuffer (HT_STATE_DATA_HANDLE, State.ConfigHandle);
+      ASSERT (DeallocateStatus == AGESA_SUCCESS);
+      AGESA_TESTPOINT (TpProcHtDone, State.ConfigHandle);
+    } else {
+      ASSERT (FALSE);
+      State.MaxEventClass = AGESA_ERROR;
+      // Cannot Log entry due to heap allocate failed.
+    }
+  } else {
+    // Do the AP HT Init, which produces Node and Socket Maps for the AP's use.
+    AGESA_TESTPOINT (TpProcHtApMapEntry, State.ConfigHandle);
+    GetApMailbox (&ApMailboxInfo.Info, State.ConfigHandle);
+    ASSERT (ApMailboxInfo.Fields.Node < MAX_NODES);
+    ApNode = (UINT8)ApMailboxInfo.Fields.Node;
+    NewNorthBridge (ApNode, &State, &Nb);
+    State.Nb = &Nb;
+    InitApMaps (&State);
+    AGESA_TESTPOINT (TpProcHtApMapDone, State.ConfigHandle);
+  }
+  return State.MaxEventClass;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htNb.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htNb.c
new file mode 100644
index 0000000000..74d0c14252
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htNb.c
@@ -0,0 +1,248 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Construct a northbridge interface for a Node.
+ *
+ * Handle build options and run-time detection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionsHt.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "CommonReturns.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFamRegisters.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#include "Filecode.h"
+
+#define FILECODE PROC_HT_HTNB_FILECODE
+
+extern OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***               FAMILY/NORTHBRIDGE SPECIFIC FUNCTIONS                 ***
+ ***************************************************************************/
+
+
+/**
+ * Initial construction data for no HT Northbridge.
+ */
+CONST NORTHBRIDGE ROMDATA HtFam10NbNone =
+{
+  1,
+  (PF_WRITE_ROUTING_TABLE)CommonVoid,
+  (PF_WRITE_NODEID)CommonVoid,
+  (PF_READ_DEFAULT_LINK)CommonReturnZero8,
+  (PF_ENABLE_ROUTING_TABLES)CommonVoid,
+  (PF_DISABLE_ROUTING_TABLES)CommonVoid,
+  (PF_VERIFY_LINK_IS_COHERENT)CommonReturnFalse,
+  (PF_READ_TOKEN)CommonReturnZero8,
+  (PF_WRITE_TOKEN)CommonVoid,
+  (PF_WRITE_FULL_ROUTING_TABLE)CommonVoid,
+  (PF_IS_ILLEGAL_TYPE_MIX)CommonReturnFalse,
+  (PF_IS_EXCEEDED_CAPABLE)CommonReturnFalse,
+  (PF_STOP_LINK)CommonVoid,
+  (PF_HANDLE_SPECIAL_LINK_CASE)CommonReturnFalse,
+  (PF_HANDLE_SPECIAL_NODE_CASE)CommonReturnFalse,
+  (PF_READ_SB_LINK)CommonReturnZero8,
+  (PF_VERIFY_LINK_IS_NON_COHERENT)CommonReturnFalse,
+  (PF_SET_CONFIG_ADDR_MAP)CommonVoid,
+  (PF_NORTH_BRIDGE_FREQ_MASK)CommonReturnZero32,
+  (PF_GATHER_LINK_FEATURES)CommonVoid,
+  (PF_SET_LINK_REGANG)CommonVoid,
+  (PF_SET_LINK_FREQUENCY)CommonVoid,
+  (PF_SET_LINK_UNITID_CLUMPING)CommonVoid,
+  (PF_WRITE_TRAFFIC_DISTRIBUTION)CommonVoid,
+  (PF_WRITE_LINK_PAIR_DISTRIBUTION)CommonVoid,
+  (PF_WRITE_VICTIM_DISTRIBUTION)CommonVoid,
+  (PF_BUFFER_OPTIMIZATIONS)CommonVoid,
+  (PF_GET_NUM_CORES_ON_NODE)CommonReturnZero8,
+  (PF_SET_TOTAL_NODES_AND_CORES)CommonVoid,
+  (PF_GET_NODE_COUNT)CommonReturnZero8,
+  (PF_LIMIT_NODES)CommonVoid,
+  (PF_READ_TRUE_LINK_FAIL_STATUS)CommonReturnFalse,
+  (PF_GET_NEXT_LINK)CommonReturnZero32,
+  (PF_GET_PACKAGE_LINK)CommonReturnZero8,
+  (PF_MAKE_LINK_BASE)CommonReturnZero32,
+  (PF_GET_MODULE_INFO)CommonVoid,
+  (PF_POST_MAILBOX)CommonVoid,
+  (PF_RETRIEVE_MAILBOX)CommonReturnZero32,
+  (PF_GET_SOCKET)CommonReturnZero8,
+  (PF_GET_ENABLED_COMPUTE_UNITS)CommonReturnZero8,
+  (PF_GET_DUALCORE_COMPUTE_UNITS)CommonReturnZero8,
+  0,
+  0,
+  0,
+  TRUE,
+  TRUE,
+  0,
+  NULL,
+  0,
+  NULL,
+  (PF_MAKE_KEY)CommonReturnZero64,
+  NULL
+};
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Make a compatibility key.
+ *
+ * @HtNbMethod{::F_MAKE_KEY}
+ *
+ * Private routine to northbridge code.
+ * Create a key which can be used to determine whether a Node is compatible with
+ * the discovered configuration so far.  Currently, that means the family,
+ * extended family of the new Node are the same as the BSP's.  Family specific
+ * implementations can add whatever else is necessary.
+ *
+ * @param[in] Node the Node
+ * @param[in] Nb   this northbridge
+ *
+ * @return the key
+ */
+UINT64
+MakeKey (
+  IN       UINT8 Node,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  CPU_LOGICAL_ID LogicalId;
+  UINT32 RawCpuId;
+  PCI_ADDR Reg;
+
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_CPUID_3XFC);
+
+  LibAmdPciReadBits (Reg, 31, 0, &RawCpuId, Nb->ConfigHandle);
+  GetLogicalIdFromCpuid (RawCpuId, &LogicalId, Nb->ConfigHandle);
+  return LogicalId.Family;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Construct a new northbridge.
+ *
+ * This routine encapsulates knowledge of how to tell significant differences between
+ * families of supported northbridges and what routines can be used in common and
+ * which are unique.  A fully populated northbridge interface is provided by Nb.
+ *
+ * @param[in]     Node    create a northbridge interface for this Node.
+ * @param[in]     State   global state
+ * @param[out]    Nb      the caller's northbridge structure to initialize.
+ */
+VOID
+NewNorthBridge (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+     OUT   NORTHBRIDGE *Nb
+  )
+{
+  CPU_LOGICAL_ID LogicalId;
+  UINT64  Match;
+  UINT32 RawCpuId;
+  PCI_ADDR Reg;
+  NORTHBRIDGE **InitializerInstance;
+
+  // Start with enough of the key to identify the northbridge interface
+  Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+                                 MakePciBusFromNode (Node),
+                                 MakePciDeviceFromNode (Node),
+                                 CPU_NB_FUNC_03,
+                                 REG_NB_CPUID_3XFC);
+  LibAmdPciReadBits (Reg, 31, 0, &RawCpuId, State->ConfigHandle);
+  IDS_HDT_CONSOLE (HT_TRACE, "AMD Processor at Node %d has raw CPUID=%x.\n", Node, RawCpuId);
+  GetLogicalIdFromCpuid (RawCpuId, &LogicalId, State->ConfigHandle);
+  Match = LogicalId.Family;
+
+  // Test each Northbridge interface in turn looking for a match.
+  // Use it to Init the Nb struct if a match is found.
+  //
+  ASSERT (OptionHtConfiguration.HtOptionFamilyNorthbridgeList != NULL);
+  InitializerInstance = (NORTHBRIDGE **) (OptionHtConfiguration.HtOptionFamilyNorthbridgeList);
+  while (*InitializerInstance != NULL) {
+    if ((Match & (*InitializerInstance)->CompatibleKey) != 0) {
+      LibAmdMemCopy ((VOID *)Nb, (VOID *)*InitializerInstance, (UINT32) sizeof (NORTHBRIDGE), State->ConfigHandle);
+      break;
+    }
+    InitializerInstance++;
+  }
+  // There must be an available northbridge implementation.
+  ASSERT (*InitializerInstance != NULL);
+
+  // Set the config handle for passing to the library.
+  Nb->ConfigHandle = State->ConfigHandle;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htNb.h b/src/vendorcode/amd/agesa/f15/Proc/HT/htNb.h
new file mode 100644
index 0000000000..0c0c22ccaa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htNb.h
@@ -0,0 +1,1134 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HT NorthBridge header
+ *
+ * Defines the interface to the HT NorthBridge module for use by other internal
+ * HT modules.  This is not a wrapper or external interface, "public" in the
+ * comments below is used in the class definition style and refers to HT client
+ * modules only ("private" being for use only by the HT NB module itself).
+ *
+ * It is expected that there will be multiple northbridge implementation files all
+ * conforming to this common interface.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44846 $   @e \$Date: 2011-01-06 22:21:05 -0700 (Thu, 06 Jan 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_NB_H_
+#define _HT_NB_H_
+
+/**
+ * @page htimplnb HT Northbridge Implementation Guide
+ *
+ * The HT Northbridge provides access to the Northbridge hardware, in a manner that
+ * isolates calling code from knowledge about the hardware implementation or which
+ * features are supported in the current build.  This is the mechanism in the HT code for
+ * supporting new Family or Model northbridges, as well as the means for supporting
+ * multiple northbridges in a single build or mixed revision northbridge sets.
+ *
+ * @par Adding a Method to the Northbridge
+ *
+ * To add a new method to the Northbridge, follow these steps.
+ * <ul>
+ * <li> Create a typedef for the Method with the correct parameters and return type.
+ *
+ *   <ul>
+ *   <li> Name the method typedef (F_METHOD_NAME)(), where METHOD_NAME is the same
+ *     name as the method table item, but with "_"'s and UPPERCASE, rather than mixed case.
+ *     @n <tt> typedef VOID (F_METHOD_NAME)(); </tt> @n
+ *
+ *   <li> Make a reference type for references to a method implementation:
+ *     @n <tt> /// Reference to a Method              </tt>
+ *     @n <tt> typedef F_METHOD_NAME *PF_METHOD_NAME </tt> @n
+ *   </ul>
+ *
+ * <li> One of the parameters to @b all northbridge Methods is @b required to be a
+ *   reference to its current northbridge object.  By convention, this is the
+ *   last parameter.
+ *
+ * <li> Provide a standard doxygen function preamble for the Method typedef. Begin the
+ *   detailed description by providing a reference to the method instances page by including
+ *   the lines below:
+ *   @code
+ *   *
+ *   * @HtNbInstances
+ *   *
+ *   @endcode
+ *   @note It is important to provide documentation for the method type, because the method may not
+ *   have an implementation in any families supported by the current package. @n
+ *
+ * <li> Add to the NORTHBRIDGE struct an item for the Method:
+ *   @n <tt>  PF_METHOD_NAME MethodName; ///< Method: description. </tt> @n
+ * </ul>
+ *
+ * @par Implementing an Instance of a Northbridge method.
+ *
+ * To implement an instance of a method for a specific feature follow these steps.
+ *
+ * - In appropriate files, implement the method with the return type and parameters
+ * matching the Method typedef.
+ *   - If the Method implementation is common to all families, use the northbridge file
+ *   for the function area, for example, add a new coherent initialization support method to the
+ *   coherent northbridge file.
+ *   - If the Method implementation is unique to each supported northbridge, use the
+ *   family specific file for that function area (create it, if it doesn't already exist).
+ *   The family specific files have the same name as the common one suffixed with "FamNN",
+ *   or "FamNNRevX" if for a model or revision.
+ *
+ * - Name the function MethodName().  If Family specific, FamNNMethodName().
+ *
+ * - Create a doxygen function preamble for the method instance.  Begin the detailed description with
+ *   an Implements command to reference the method type and add this instance to the Method Instances page.
+ *   @code
+ *   *
+ *   *  @HtNbMethod{::F_METHOD_NAME}.
+ *   *
+ *   @endcode
+ *
+ * - To access other northbridge routines or data as part of the method implementation,
+ *   the function must use Nb->OtherMethod().  Do not directly access other northbridge
+ *   routines, because in the table there may be overrides or this routine may be shared by
+ *   multiple configurations.
+ *
+ * - Add the instance, or the correct family specific instance, to the NORTHBRIDGE instances
+ *   used by the northbridge constructor.
+ *
+ * - If a northbridge does not need an instance of the method use one of the CommonReturns from
+ *   CommonReturns.h with the same return type.
+ *
+ * @par Making common Northbridge Methods.
+ *
+ * In some cases, Northbridge methods can easily have a common implementation because the hardware
+ * is very compatible or is even standard.  In other cases, where processor family northbridges
+ * differ in their implementation, it may be possible to provide a single, common method
+ * implementation.  This can be accomplished by adding Northbridge data members.
+ *
+ * For example, a bit position or bit field mask can be used to accommodate different bit placement or size.
+ * Another example, a small table can be used to translate index values from a common set
+ * to specific sets.
+ *
+ * The Northbridge Method Instance must use its NORTHBRIDGE reference parameter to access
+ * private data members.
+ *
+ * @par Invoking HT Northbridge Methods.
+ *
+ * Each unique northbridge is constructed based on matching the current northbridge.
+ * @n @code
+ *   NORTHBRIDGE Nb;
+ *   // Create the BSP's northbridge.
+ *   NewNorthBridge (0, State, &Nb);
+ *   State->Nb = &Nb;
+ * @endcode
+ *
+ * The following example shows how to invoke a Northbridge method.
+ * @n @code
+ *   State->Nb->MethodName (State->Nb);
+ * @endcode
+ *
+ */
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/** Use a macro to convert a Node number to a PCI device.  If some future port of
+ * this code needs to, this can easily be replaced by the function declaration:
+ * UINT8 makePCIDeviceFromNode(UINT8 Node);
+ */
+#define MakePciDeviceFromNode(Node)             \
+  ((UINT8) (24 + (Node)))
+
+/** Use a macro to convert a Node number to a PCI bus.  If some future port of
+ * this code needs to, this can easily be replaced by the function declaration:
+ * UINT8 MakePciBusFromNode(UINT8 Node);
+ */
+#define MakePciBusFromNode(Node)                \
+  ((UINT8) (0))
+
+/** Use a macro to convert a Node number to a PCI Segment.  If some future port of
+ * this code needs to, this can easily be replaced by the function declaration:
+ * UINT8 MakePciSegmentFromNode(UINT8 Node);
+ */
+#define MakePciSegmentFromNode(Node)            \
+  ((UINT8) (0))
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/**
+ * Status for iterating through internal (if supported) and external links.
+ */
+typedef enum {
+  LinkIteratorEnd,         ///< This is the end of all links, no valid link.
+  LinkIteratorExternal,    ///< The next link (the one we got on this call) is an external link.
+  LinkIteratorInternal,    ///< The next link (the one we got on this call) is an internal link.
+  LinkIteratorMax          ///< For bounds checking and limit only.
+} LINK_ITERATOR_STATUS;
+
+#define LINK_ITERATOR_BEGIN 0xFF
+
+/**
+ * Write a temporary Route.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node The node on which to set a temporary route
+ * @param[in] Target A route to this node, which route table entry is to be set
+ * @param[in] Link The link which routes to the target node
+ * @param[in] Nb This northbridge
+ */
+typedef VOID F_WRITE_ROUTING_TABLE (
+  IN       UINT8       Node,
+  IN       UINT8       Target,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_WRITE_ROUTING_TABLE *PF_WRITE_ROUTING_TABLE;
+
+/**
+ * Modifies the NodeID register on the target Node
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node   the Node that will have its NodeID altered.
+ * @param[in]     NodeID the new value for NodeID
+ * @param[in]     Nb     this northbridge
+ */
+typedef VOID F_WRITE_NODEID (
+  IN       UINT8       Node,
+  IN       UINT8       NodeID,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_WRITE_NODEID *PF_WRITE_NODEID;
+
+/**
+ * Read the Default Link
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node   the Node that will have its NodeID altered.
+ * @param[in]     Nb     this northbridge
+ *
+ * @return The HyperTransport Link where the request to
+ *        read the default Link came from.  Since this code is running on the BSP,
+ *        this should be the Link pointing back towards the BSP.
+ */
+typedef UINT8 F_READ_DEFAULT_LINK (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_READ_DEFAULT_LINK *PF_READ_DEFAULT_LINK;
+
+/**
+ * Turns routing tables on for a given Node
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will have it's routing tables enabled
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_ENABLE_ROUTING_TABLES (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_ENABLE_ROUTING_TABLES *PF_ENABLE_ROUTING_TABLES;
+
+/**
+ * Turns routing tables off for a given Node
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will have it's routing tables disabled
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_DISABLE_ROUTING_TABLES (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_DISABLE_ROUTING_TABLES *PF_DISABLE_ROUTING_TABLES;
+
+/**
+ * Verify that the Link is coherent, connected, and ready
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node    the Node that will be examined
+ * @param[in]     Link    the Link on that Node to examine
+ * @param[in]     Nb      this northbridge
+ *
+ * @retval        TRUE    The Link is coherent
+ *  @retval       FALSE   The Link has some other status
+*/
+typedef BOOLEAN F_VERIFY_LINK_IS_COHERENT (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_VERIFY_LINK_IS_COHERENT *PF_VERIFY_LINK_IS_COHERENT;
+
+/**
+ * Read the token stored in the scratchpad register field.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node    the Node that will be examined
+ * @param[in]     Nb      this northbridge
+ *
+ * @return        the Token read from the Node
+ */
+typedef UINT8 F_READ_TOKEN (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_READ_TOKEN *PF_READ_TOKEN;
+
+/**
+ * Write the token stored in the scratchpad register
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node the Node that marked with token
+ * @param[in]     Value the token Value
+ * @param[in]     Nb this northbridge
+ */
+typedef VOID F_WRITE_TOKEN (
+  IN       UINT8       Node,
+  IN       UINT8       Value,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_WRITE_TOKEN *PF_WRITE_TOKEN;
+
+/**
+ * Full Routing Table Register initialization
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node            the Node that will be examined
+ * @param[in]     Target          the Target Node for these routes
+ * @param[in]     ReqLink         the Link for requests to Target
+ * @param[in]     RspLink         the Link for responses to Target
+ * @param[in]     BroadcastLinks  the broadcast Links
+ * @param[in]     Nb              this northbridge
+ */
+typedef VOID F_WRITE_FULL_ROUTING_TABLE (
+  IN       UINT8       Node,
+  IN       UINT8       Target,
+  IN       UINT8       ReqLink,
+  IN       UINT8       RspLink,
+  IN       UINT32      BroadcastLinks,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_WRITE_FULL_ROUTING_TABLE *PF_WRITE_FULL_ROUTING_TABLE;
+
+/**
+ * Determine whether a Node is compatible with the discovered configuration so far.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node
+ * @param[in] Nb this northbridge
+ *
+ * @retval   TRUE    the node is not compatible
+ * @retval   FALSE   the node is compatible
+ */
+typedef BOOLEAN F_IS_ILLEGAL_TYPE_MIX (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_IS_ILLEGAL_TYPE_MIX *PF_IS_ILLEGAL_TYPE_MIX;
+
+/**
+ * Return whether the current configuration exceeds the capability
+ * of the nodes detected.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node    the Node
+ * @param[in]     State    sysMpCap (updated) and NodesDiscovered
+ * @param[in]     Nb      this northbridge
+ *
+ * @retval        TRUE     system is not capable of current config.
+ * @retval        FALSE    system is capable of current config.
+ */
+typedef BOOLEAN F_IS_EXCEEDED_CAPABLE (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_IS_EXCEEDED_CAPABLE *PF_IS_EXCEEDED_CAPABLE;
+
+/**
+ * Stop a link, so that it is isolated from a connected device.
+ *
+ * @HtNbInstances
+ *
+ * Use is for fatal incompatible configurations.
+ * While XMIT and RCV off are HT standard, the use of these bits
+ * is generally family specific.
+ *
+ * @param[in] Node   the node to stop a link on.
+ * @param[in] Link   the link to stop.
+ * @param[in] State  access to special routine for writing link control register
+ * @param[in] Nb     this northbridge.
+ */
+typedef VOID F_STOP_LINK (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_STOP_LINK *PF_STOP_LINK;
+
+/**
+ * Fix (hopefully) exceptional conditions.
+ *
+ * @HtNbInstances
+ *
+ * This routine is expected to be unimplemented for most families.
+ * Some configurations may require that links be processed specially to prevent
+ * serious problems, like hangs.  Check for that condition in this routine,
+ * handle the link both for hardware and for adding to port list, if appropriate.
+ * If this routine adds the link to port list or the link should not be added, return TRUE.
+ *
+ * @param[in] Node  The Node which has this link
+ * @param[in] Link  The link to check for special conditions.
+ * @param[in] State our global state.
+ * @param[in] Nb    this northbridge.
+ *
+ * @retval    TRUE  This link received special handling.
+ * @retval    FALSE This link was not handled specially, handle it normally.
+ *
+ */
+typedef BOOLEAN F_HANDLE_SPECIAL_LINK_CASE (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_HANDLE_SPECIAL_LINK_CASE *PF_HANDLE_SPECIAL_LINK_CASE;
+
+/**
+ * Fix (hopefully) exceptional conditions.
+ *
+ * @HtNbInstances
+ *
+ * This routine is expected to be unimplemented for most families.
+ * Some configurations may require that nodes be processed specially to prevent
+ * serious problems, like hangs.  Check for that condition in this routine,
+ * handle the node both for hardware and for adding to port list, if appropriate.
+ * If this routine adds the node to port list or the node should not be added, return TRUE.
+ *
+ * @param[in] Node  The Node which need to be checked.
+ * @param[in] Link  The link to check for special conditions.
+ * @param[in] State our global state.
+ * @param[in] Nb    this northbridge.
+ *
+ * @retval    TRUE  This node received special handling.
+ * @retval    FALSE This node was not handled specially, handle it normally.
+ *
+ */
+typedef BOOLEAN F_HANDLE_SPECIAL_NODE_CASE (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_HANDLE_SPECIAL_NODE_CASE *PF_HANDLE_SPECIAL_NODE_CASE;
+
+/**
+ * Get Info about Module Type of this northbridge
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node                the Node
+ * @param[out]    ModuleType          0 for Single, 1 for Multi
+ * @param[out]    Module              The module number of this node (0 if Single)
+ * @param[in]     Nb                  this northbridge
+ *
+ */
+typedef VOID F_GET_MODULE_INFO (
+  IN       UINT8       Node,
+     OUT   UINT8       *ModuleType,
+     OUT   UINT8       *Module,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_GET_MODULE_INFO *PF_GET_MODULE_INFO;
+
+/**
+ * Post info to AP cores via a mailbox.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node          the Node
+ * @param[in]     ApMailInfo    The info to post
+ * @param[in]     Nb            this northbridge
+ *
+ */
+typedef VOID F_POST_MAILBOX (
+  IN       UINT8        Node,
+  IN       AP_MAILBOXES ApMailInfo,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_POST_MAILBOX *PF_POST_MAILBOX;
+
+/**
+ * Retrieve info from a node's AP mailbox.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node          the Node
+ * @param[in]     ApMailInfo    The info to post
+ * @param[in]     Nb            this northbridge
+ *
+ */
+typedef AP_MAIL_INFO F_RETRIEVE_MAILBOX (
+  IN       UINT8        Node,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_RETRIEVE_MAILBOX *PF_RETRIEVE_MAILBOX;
+
+/**
+ * Implement the hardware method of doing Socket Naming, by accessing this northbridge's Socket Id register.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]   Node     The node for which we want the socket id.
+ * @param[in]   TempNode The temporary node id route where the node can be accessed.
+ * @param[in]   Nb       Our Northbridge.
+ *
+ * @return      The Socket Id
+ */
+typedef UINT8 F_GET_SOCKET (
+  IN       UINT8       Node,
+  IN       UINT8       TempNode,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/// Reference to a method.
+typedef F_GET_SOCKET *PF_GET_SOCKET;
+
+/**
+ * Get the enabled Compute Units.
+ *
+ * Processors which don't support compute units return zero.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]   Node     The node for which we want the socket id.
+ * @param[in]   Nb       Our Northbridge.
+ *
+ * @return      The Socket Id
+ */
+typedef UINT8 F_GET_ENABLED_COMPUTE_UNITS (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/// Reference to a method.
+typedef F_GET_ENABLED_COMPUTE_UNITS *PF_GET_ENABLED_COMPUTE_UNITS;
+
+/**
+ * Get the dual core Compute Units.
+ *
+ * Processors which don't support compute units return zero.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]   Node     The node for which we want the socket id.
+ * @param[in]   Nb       Our Northbridge.
+ *
+ * @return      The Socket Id
+ */
+typedef UINT8 F_GET_DUALCORE_COMPUTE_UNITS (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+/// Reference to a method.
+typedef F_GET_DUALCORE_COMPUTE_UNITS *PF_GET_DUALCORE_COMPUTE_UNITS;
+
+/**
+ * Return the Link to the Southbridge
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Nb this northbridge
+ *
+ * @return the Link to the southbridge
+ */
+typedef UINT8 F_READ_SB_LINK (
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_READ_SB_LINK *PF_READ_SB_LINK;
+
+/**
+ * Verify that the Link is non-coherent, connected, and ready
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node    the Node that will be examined
+ * @param[in]     Link    the Link on that Node to examine
+ * @param[in]     Nb      this northbridge
+ *
+ * @retval        TRUE    The Link is non-coherent.
+ * @retval        FALSE   The Link has some other status
+ */
+typedef BOOLEAN F_VERIFY_LINK_IS_NON_COHERENT (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_VERIFY_LINK_IS_NON_COHERENT *PF_VERIFY_LINK_IS_NON_COHERENT;
+
+/**
+ * Enable config access to a non-coherent chain for the given bus range.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     ConfigMapIndex the map entry to set
+ * @param[in]     SecBus         The secondary bus number to use
+ * @param[in]     SubBus         The subordinate bus number to use
+ * @param[in]     TargetNode     The Node  that shall be the recipient of the traffic
+ * @param[in]     TargetLink     The Link that shall be the recipient of the traffic
+ * @param[in]     State          our global state
+ * @param[in]     Nb             this northbridge
+ */
+typedef VOID F_SET_CONFIG_ADDR_MAP (
+  IN       UINT8       ConfigMapIndex,
+  IN       UINT8       SecBus,
+  IN       UINT8       SubBus,
+  IN       UINT8       TargetNode,
+  IN       UINT8       TargetLink,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_SET_CONFIG_ADDR_MAP *PF_SET_CONFIG_ADDR_MAP;
+
+/**
+ * Northbridge specific Frequency limit.
+ *
+ * @HtNbInstances
+ *
+ * Return a mask that eliminates HT frequencies that cannot be used due to a slow
+ * northbridge frequency.
+ *
+ * @param[in]     Node             Result could (later) be for a specific Node
+ * @param[in]     Interface        Access to non-HT support functions.
+ * @param[in]     PlatformConfig   Platform profile/build option config structure.
+ * @param[in]     Nb               this northbridge
+ *
+ * @return Frequency mask
+ */
+typedef UINT32 F_NORTH_BRIDGE_FREQ_MASK (
+  IN       UINT8                  Node,
+  IN       HT_INTERFACE           *Interface,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       NORTHBRIDGE            *Nb
+  );
+/// Reference to a method.
+typedef F_NORTH_BRIDGE_FREQ_MASK *PF_NORTH_BRIDGE_FREQ_MASK;
+
+/**
+ * Get Link features into system data structure.
+ *
+ * @HtNbInstances
+ *
+ * @param[in,out] ThisPort         The PortList structure entry for this link's port
+ * @param[in]     Interface        Access to non-HT support functions.
+ * @param[in]     PlatformConfig   Platform profile/build option config structure.
+ * @param[in]     Nb               this northbridge
+ */
+typedef VOID F_GATHER_LINK_FEATURES (
+  IN OUT   PORT_DESCRIPTOR        *ThisPort,
+  IN       HT_INTERFACE           *Interface,
+  IN       PLATFORM_CONFIGURATION *PlatformConfig,
+  IN       NORTHBRIDGE            *Nb
+  );
+/// Reference to a method.
+typedef F_GATHER_LINK_FEATURES *PF_GATHER_LINK_FEATURES;
+
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node   the node on which to regang a link
+ * @param[in]     Link   the sublink 0 of the sublink pair to regang
+ * @param[in]     Nb     this northbridge
+ */
+typedef VOID F_SET_LINK_REGANG (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_SET_LINK_REGANG *PF_SET_LINK_REGANG;
+
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node        the node on which to set frequency for a link
+ * @param[in]     Link        the link to set frequency
+ * @param[in]     Frequency   the frequency to set
+ * @param[in]     Nb          this northbridge
+ */
+typedef VOID F_SET_LINK_FREQUENCY (
+  IN       UINT8          Node,
+  IN       UINT8          Link,
+  IN       UINT8          Frequency,
+  IN       NORTHBRIDGE    *Nb
+  );
+/// Reference to a method.
+typedef F_SET_LINK_FREQUENCY *PF_SET_LINK_FREQUENCY;
+
+/**
+ * Set the link's Unit Id Clumping enable.
+ *
+ * @HtNbInstances
+ *
+ * This applies to the host root of a non-coherent chain.
+ *
+ * @param[in]     Node              the node on which to set frequency for a link
+ * @param[in]     Link              the link to set frequency
+ * @param[in]     ClumpingEnables   the unit id clumping enables to set
+ * @param[in]     Nb                this northbridge
+ */
+typedef VOID F_SET_LINK_UNITID_CLUMPING (
+  IN       UINT8          Node,
+  IN       UINT8          Link,
+  IN       UINT32         ClumpingEnables,
+  IN       NORTHBRIDGE    *Nb
+  );
+/// Reference to a method.
+typedef F_SET_LINK_UNITID_CLUMPING *PF_SET_LINK_UNITID_CLUMPING;
+
+/**
+ * Set the traffic distribution register for the Links provided.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Links01   coherent Links from Node 0 to 1
+ * @param[in]     Links10   coherent Links from Node 1 to 0
+ * @param[in]     Nb        this northbridge
+ */
+typedef VOID F_WRITE_TRAFFIC_DISTRIBUTION (
+  IN       UINT32       Links01,
+  IN       UINT32       Links10,
+  IN       NORTHBRIDGE  *Nb
+  );
+/// Reference to a method.
+typedef F_WRITE_TRAFFIC_DISTRIBUTION *PF_WRITE_TRAFFIC_DISTRIBUTION;
+
+/**
+ * Set the traffic distribution register for the Links provided.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     NodeA                          Source Node from Node A To Node B and DstNode from Node A To Node B
+ * @param[in]     NodeB                          Source Node from Node B To Node A and DstNode from Node A To Node B
+ * @param[in]     VictimedLinkFromNodeAToNodeB   Victimed Link from Node A To Node B
+ * @param[in]     VictimedLinkFromNodeBToNodeA   Victimed Link from Node B To Node A
+ * @param[in]     Nb        this northbridge
+ */
+typedef VOID F_WRITE_VICTIM_DISTRIBUTION (
+  IN       UINT8        NodeA,
+  IN       UINT8        NodeB,
+  IN       UINT32       VictimedLinkFromNodeAToNodeB,
+  IN       UINT32       VictimedLinkFromNodeBToNodeA,
+  IN       NORTHBRIDGE  *Nb
+  );
+/// Reference to a method.
+typedef F_WRITE_VICTIM_DISTRIBUTION *PF_WRITE_VICTIM_DISTRIBUTION;
+
+/**
+ * Write a link pair to the link pair distribution and fixups.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]    Node           Set the pair on this node
+ * @param[in]    ConnectedNode  The Node to which this link pair directly connects.
+ * @param[in]    Pair           Using this pair set in the register
+ * @param[in]    Asymmetric     True if different widths
+ * @param[in]    MasterLink     Set this as the master link and in the route
+ * @param[in]    AlternateLink  Set this as the alternate link
+ * @param[in]    Nb             this northbridge
+ *
+ */
+typedef VOID F_WRITE_LINK_PAIR_DISTRIBUTION (
+  IN       UINT8        Node,
+  IN       UINT8        ConnectedNode,
+  IN       UINT8        Pair,
+  IN       BOOLEAN      Asymmetric,
+  IN       UINT8        MasterLink,
+  IN       UINT8        AlternateLink,
+  IN       NORTHBRIDGE  *Nb
+  );
+/// Pointer to method WriteLinkPairDistribution
+typedef F_WRITE_LINK_PAIR_DISTRIBUTION *PF_WRITE_LINK_PAIR_DISTRIBUTION;
+
+/**
+ * Family specific tunings.
+ *
+ * @HtNbInstances
+ *
+ * Buffer tunings are inherently northbridge specific. Check for specific configs
+ * which require adjustments and apply any standard workarounds to this Node.
+ *
+ * @param[in]     Node   the Node to tune
+ * @param[in]     State   global state
+ * @param[in]     Nb     this northbridge
+ */
+typedef VOID F_BUFFER_OPTIMIZATIONS (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_BUFFER_OPTIMIZATIONS *PF_BUFFER_OPTIMIZATIONS;
+
+/**
+ * Return the number of cores (1 based count) on Node.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node   the Node that will be examined
+ * @param[in]     Nb     this northbridge
+ *
+ * @return        the number of cores
+ */
+typedef UINT8 F_GET_NUM_CORES_ON_NODE (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_GET_NUM_CORES_ON_NODE *PF_GET_NUM_CORES_ON_NODE;
+
+/**
+ * Write the total number of cores and Nodes to the Node
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node         the Node that will be examined
+ * @param[in]     TotalNodes   the total number of Nodes
+ * @param[in]     TotalCores   the total number of cores
+ * @param[in]     Nb           this northbridge
+ */
+typedef VOID F_SET_TOTAL_NODES_AND_CORES (
+  IN       UINT8       Node,
+  IN       UINT8       TotalNodes,
+  IN       UINT8       TotalCores,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_SET_TOTAL_NODES_AND_CORES *PF_SET_TOTAL_NODES_AND_CORES;
+
+/**
+ * Get the Count of Nodes in the system.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Nb    This Northbridge.
+ *
+ * @return    The Count (1 based) of Nodes in the system.
+ */
+typedef UINT8 F_GET_NODE_COUNT (
+  IN       NORTHBRIDGE *Nb
+  );
+
+/// Reference to a method.
+typedef F_GET_NODE_COUNT *PF_GET_NODE_COUNT;
+
+/**
+ * Limit coherent config accesses to cpus as indicated by Nodecnt.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node    the Node that will be examined
+ * @param[in]     Nb      this northbridge
+ */
+typedef VOID F_LIMIT_NODES (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_LIMIT_NODES *PF_LIMIT_NODES;
+
+/**
+ * Return the LinkFailed status AFTER an attempt is made to clear the bit.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node  the Node that will be examined
+ * @param[in]     Link  the Link on that Node to examine
+ * @param[in]     State  access to call back routine
+ * @param[in]     Nb    this northbridge
+ *
+ * @retval        TRUE   the Link is not connected or has hard error
+ * @retval        FALSE  the Link is connected
+ */
+typedef BOOLEAN F_READ_TRUE_LINK_FAIL_STATUS (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_READ_TRUE_LINK_FAIL_STATUS *PF_READ_TRUE_LINK_FAIL_STATUS;
+
+/**
+ * Get the next link for iterating over the links on a node in the correct order.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node The node on which to iterate links.
+ * @param[in,out] Link IN: the current iteration context, OUT: the next link.
+ * @param[in]     Nb   This Northbridge, access to config pointer.
+ *
+ * @retval LinkIteratorEnd         There is no next link (Link is back to BEGIN).
+ * @retval LinkIteratorExternal    The next Link is an external link.
+ * @retval LinkIteratorInternal    The next Link is an internal link.
+ */
+typedef LINK_ITERATOR_STATUS F_GET_NEXT_LINK (
+  IN       UINT8       Node,
+  IN OUT   UINT8       *Link,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Pointer to method GetNextLink
+typedef F_GET_NEXT_LINK *PF_GET_NEXT_LINK;
+
+/**
+ * Get the Package Link number, given the node and real link number.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]   Node       the node which has this link
+ * @param[in]   Link       the link on that node
+ * @param[in]   Nb         this northbridge
+ *
+ * @return                 the Package Link
+ *
+ */
+typedef UINT8 F_GET_PACKAGE_LINK (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method
+typedef F_GET_PACKAGE_LINK *PF_GET_PACKAGE_LINK;
+
+/**
+ * Return the HT Host capability base PCI config address for a Link.
+ *
+ * @HtNbInstances
+ *
+ * @param[in]     Node    the Node this Link is on
+ * @param[in]     Link    the Link
+ * @param[in]     Nb      this northbridge
+ *
+ * @return  the pci config address
+ */
+typedef PCI_ADDR F_MAKE_LINK_BASE (
+  IN       UINT8       Node,
+  IN       UINT8       Link,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_MAKE_LINK_BASE *PF_MAKE_LINK_BASE;
+
+/**
+ * Make a compatibility key.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node
+ * @param[in] Nb   this northbridge
+ *
+ * @return the key
+ */
+typedef UINT64 F_MAKE_KEY (
+  IN       UINT8       Node,
+  IN       NORTHBRIDGE *Nb
+  );
+/// Reference to a method.
+typedef F_MAKE_KEY *PF_MAKE_KEY;
+
+/**
+ * The northbridge interface.
+ *
+ * Abstract the hardware implementation of the processor northbridge.  Feature code does
+ * not need to be tailored to specific families.  Also, more than a single family (or
+ * model in some cases) can be supported at once.  Multiple family support can be for
+ * mixed revisions or for incompatible revisions where only one is used at a time.
+ *
+ * The northbridge object contains both HT component public and northbridge private
+ * members.  These sets are grouped together.  Within each group, members are grouped
+ * according to the function area they support.
+ *
+ */
+struct _NORTHBRIDGE {               // See forward declaration in HtFeats.h
+  /* Public data, clients of northbridge can access */
+  UINT8 MaxLinks;               /**< The maximum number of Links implemented by the northbridge */
+
+  /* Public Interfaces for northbridge clients, coherent init*/
+  PF_WRITE_ROUTING_TABLE WriteRoutingTable;    /**< Method: Write a Temporary route for discovery */
+  PF_WRITE_NODEID WriteNodeID;    /**< Method: Assign a Node ID*/
+  PF_READ_DEFAULT_LINK ReadDefaultLink;    /**< Method: Which link are we connected to on a remote node? */
+  PF_ENABLE_ROUTING_TABLES EnableRoutingTables;    /**< Method: Make the routing table active */
+  PF_DISABLE_ROUTING_TABLES DisableRoutingTables;    /**< Method: Put a node back in discoverable state (deflnk) */
+  PF_VERIFY_LINK_IS_COHERENT VerifyLinkIsCoherent;    /**< Method: is a link connected and coherent? */
+  PF_READ_TOKEN ReadToken;    /**< Method: Read the enumeration token from a node */
+  PF_WRITE_TOKEN WriteToken;    /**< Method: Assign an enumeration token to a node */
+  PF_WRITE_FULL_ROUTING_TABLE WriteFullRoutingTable;    /**< Method: Set a complete routing table entry on a node */
+  PF_IS_ILLEGAL_TYPE_MIX IsIllegalTypeMix;    /**< Method: Is this node compatible with the system */
+  PF_IS_EXCEEDED_CAPABLE IsExceededCapable;    /**< Method: Is this node capable of working in this system */
+  PF_STOP_LINK StopLink;    /**< Method: stop a link which must be unused */
+  PF_HANDLE_SPECIAL_LINK_CASE HandleSpecialLinkCase;    /**< Method: Fix broken configuration designs */
+  PF_HANDLE_SPECIAL_NODE_CASE HandleSpecialNodeCase;    /**< Method: Fix broken configuration designs */
+
+  /* Public Interfaces for northbridge clients, noncoherent init */
+  PF_READ_SB_LINK ReadSouthbridgeLink;    /**< Method: Which link goes to the southbridge? */
+  PF_VERIFY_LINK_IS_NON_COHERENT VerifyLinkIsNonCoherent;    /**< Method: is a link connected and non-coherent? */
+  PF_SET_CONFIG_ADDR_MAP SetConfigAddrMap;    /**< Method: Add a non-coherent chain to the PCI Config Bus Address Map */
+
+  /* Public Interfaces for northbridge clients, Optimization */
+  PF_NORTH_BRIDGE_FREQ_MASK NorthBridgeFreqMask;    /**< Method: Check for frequency limits other than HT */
+  PF_GATHER_LINK_FEATURES GatherLinkFeatures;        /**< Method: Get frequency and link features */
+  PF_SET_LINK_REGANG SetLinkRegang;              /**< Method: Set a Link to regang */
+  PF_SET_LINK_FREQUENCY SetLinkFrequency;        /**< Method: Set the link Frequency */
+  PF_SET_LINK_UNITID_CLUMPING SetLinkUnitIdClumping;   /**< Method: Set the link's Unit Id Clumping register */
+
+  /* Public Interfaces for northbridge clients, System and performance Tuning. */
+  PF_WRITE_TRAFFIC_DISTRIBUTION WriteTrafficDistribution;    /**< Method: traffic distribution setting */
+  PF_WRITE_LINK_PAIR_DISTRIBUTION WriteLinkPairDistribution;    /**< Method: Link Pair setting and fix up */
+  PF_WRITE_VICTIM_DISTRIBUTION WriteVictimDistribution;    /**< Method: victim distribution setting */
+  PF_BUFFER_OPTIMIZATIONS BufferOptimizations;    /**< Method: system tunings which can not be
+                                                   * done using register table */
+
+  /* Public Interfaces for northbridge clients, utility routines */
+  PF_GET_NUM_CORES_ON_NODE GetNumCoresOnNode;    /**< Method: Count cores */
+  PF_SET_TOTAL_NODES_AND_CORES SetTotalNodesAndCores;    /**< Method: Set Node and Core counts */
+  PF_GET_NODE_COUNT GetNodeCount;    /**< Method: Get the Count (1 based) of Nodes in the system. */
+  PF_LIMIT_NODES LimitNodes;    /**< Method: Set the Limit Config Space feature */
+  PF_READ_TRUE_LINK_FAIL_STATUS ReadTrueLinkFailStatus;    /**< Method: Get Fault status and connectivity of a link */
+  PF_GET_NEXT_LINK GetNextLink;    /**< Method: Iterate over a node's Internal, then External links. */
+  PF_GET_PACKAGE_LINK GetPackageLink;    /**< Method: the package link corresponding to a node's link */
+  PF_MAKE_LINK_BASE MakeLinkBase;    /**< Method: Provide the PCI Config Base register offset of a CPU link */
+  PF_GET_MODULE_INFO GetModuleInfo;    /**< Method: Get Module Type and internal Module number */
+  PF_POST_MAILBOX PostMailbox;     /**< Method: Post info to the mailbox register */
+  PF_RETRIEVE_MAILBOX RetrieveMailbox;     /**< Method: Retrieve info from the mailbox register */
+  PF_GET_SOCKET GetSocket;    /**< Method: Get a node's Socket, using the hardware naming method. */
+  PF_GET_ENABLED_COMPUTE_UNITS GetEnabledComputeUnits; /**< Method: Get the Enabled Compute Units */
+  PF_GET_DUALCORE_COMPUTE_UNITS GetDualCoreComputeUnits; /**< Method: Get which Compute Units have two cores. */
+
+  /* Private Data for northbridge implementation use only */
+  UINT32 SelfRouteRequestMask;  /**< Bit pattern for route request to self in routing table register */
+  UINT32 SelfRouteResponseMask; /**< Bit pattern for route response to self in routing table register */
+  UINT8 BroadcastSelfBit;       /**< Bit offset of broadcast self bit in routing table register */
+  BOOLEAN IsOrderBSPCoresByNode; /**< This processor orders Cores by Node id on the BSP, if TRUE. */
+  BOOLEAN IsOrderCoresByModule;  /**< Processors other than the BSP order Cores by Module, if TRUE. */
+  UINT64 CompatibleKey;         /**< Used for checking compatibility of northbridges in the system */
+  PACKAGE_HTLINK_MAP PackageLinkMap;    /**< Tell GetPackageLink() how to assign link names */
+  UINT32 CoreFrequency;           /**< Cache the northbridge core frequency, so repeated interface calls are avoided.
+                                   *   A value of zero, means no value yet. */
+  IGNORE_LINK *DefaultIgnoreLinkList;   /**< After processing the user interface ignore link, process this list. */
+
+  /* Private Interfaces for northbridge implementation. */
+  PF_MAKE_KEY MakeKey;    /**< Method: make the compatibility key for this node */
+
+  /** Config Pointer, opaque handle for passing to lib */
+  VOID *ConfigHandle;
+};
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+/**
+ * Make a compatibility key.
+ *
+ */
+UINT64
+MakeKey (
+  IN       UINT8 Node,
+  IN       NORTHBRIDGE *Nb
+  );
+
+VOID
+NewNorthBridge (
+  IN       UINT8       Node,
+  IN       STATE_DATA  *State,
+     OUT   NORTHBRIDGE *Nb
+  );
+
+#endif  /* _HT_NB_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htNbCommonHardware.h b/src/vendorcode/amd/agesa/f15/Proc/HT/htNbCommonHardware.h
new file mode 100644
index 0000000000..c23f17091e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htNbCommonHardware.h
@@ -0,0 +1,123 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge hardware definitions for Family 10h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+#ifndef _HT_NB_HARDWARE_FAM10_H_
+#define _HT_NB_HARDWARE_FAM10_H_
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* CPU Northbridge Functions */
+#define CPU_HTNB_FUNC_00                  0
+#define CPU_HTNB_FUNC_04                  4
+#define CPU_ADDR_FUNC_01                  1
+#define CPU_NB_FUNC_03                    3
+#define CPU_NB_FUNC_05                    5
+
+/* Function 0 registers */
+#define REG_ROUTE0_0X40                   0x40
+#define REG_ROUTE1_0X44                   0x44
+#define REG_NODE_ID_0X60                  0x60
+#define REG_UNIT_ID_0X64                  0x64
+#define REG_LINK_TRANS_CONTROL_0X68       0x68
+#define REG_LINK_INIT_CONTROL_0X6C        0x6C
+#define REG_HT_CAP_BASE_0X80              0x80
+#define REG_HT_LINK_CLUMPING0_0X110       0x110
+#define REG_HT_LINK_RETRY0_0X130          0x130
+#define REG_HT_EXTENDED_NODE_ID_F0X160    0x160
+#define HTREG_NODE_CPUCNT_4_0             0x1F
+#define HTREG_EXTNODE_CPUCNT_7_5          0xE0
+#define REG_HT_TRAFFIC_DIST_0X164         0x164
+#define REG_LINK_GLOBAL_EXT_CONTROL_0x16C 0x16C
+#define REG_HT_LINK_EXT_CONTROL0_0X170    0x170
+#define REG_HT_LINK_INITIALIZATION_0X1A0  0x1A0
+#define PAIR_SELECT_OFFSET                8
+#define REG_HT_LINK_PAIR_DIST_0X1E0       0x1E0
+
+/* Function 1 registers */
+#define REG_ADDR_CONFIG_MAP0_1XE0         0xE0
+#define CPU_ADDR_NUM_CONFIG_MAPS          4
+
+/* Function 3 registers */
+#define REG_NB_SRI_XBAR_BUF_3X70          0x70
+#define REG_NB_MCT_XBAR_BUF_3X78          0x78
+#define REG_NB_FIFOPTR_3XDC               0xDC
+#define REG_NB_CAPABILITY_3XE8            0xE8
+#define REG_NB_CPUID_3XFC                 0xFC
+#define REG_NB_LINK_XCS_TOKEN0_3X148      0x148
+#define REG_NB_MCA_LINK_THRESHOLD_3X168   0x168
+#define REG_NB_MCA_L3_THRESHOLD_3X170     0x170
+#define REG_NB_DOWNCORE_3X190             0x190
+#define REG_NB_SBI_CONTROL_3X1E4          0x1E4
+
+/* Function 4 registers */
+
+/* Function 5 registers */
+#define REG_NB_COMPUTE_UNIT_5X80            0x80
+#define REG_NB_CAPABILITY_2_5X84            0x84
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif /* _HT_NB_HARDWARE_FAM10_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htNotify.c b/src/vendorcode/amd/agesa/f15/Proc/HT/htNotify.c
new file mode 100644
index 0000000000..990a67dc2c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htNotify.c
@@ -0,0 +1,670 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Code for detailed notification of events and status.
+ *
+ * Routines for logging and reporting details and summary status.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 56279 $   @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNotify.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_HT_HTNOTIFY_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Log an event.
+ *
+ * Errors, events, faults, warnings, and useful information are provided by
+ * calling this routine as often as necessary, once for each notification.
+ * @sa AGESA.h for class, and event definitions.
+ * @sa htNotify.h for event data definitions.
+ *
+ * @param[in]     EvtClass      What level event is this
+ * @param[in]     Event         A unique ID of this event
+ * @param[in]     EventData     useful data associated with the event.
+ * @param[in]     State         the log area and remaining free space
+ */
+VOID
+STATIC
+setEventNotify (
+  IN       AGESA_STATUS  EvtClass,
+  IN       UINT32        Event,
+  IN       CONST UINT8  *EventData,
+  IN       STATE_DATA   *State
+  )
+{
+  UINT32 DataParam[NUMBER_OF_EVENT_DATA_PARAMS];
+
+  // Remember the highest event class notified, that becomes our return code.
+  if (State->MaxEventClass < EvtClass) {
+    State->MaxEventClass = EvtClass;
+  }
+
+  // Copy the event data to the log data
+  LibAmdMemCopy (
+    DataParam,
+    (VOID *)EventData,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  // Log the event
+  PutEventLog (
+    EvtClass,
+    Event,
+    DataParam[0],
+    DataParam[1],
+    DataParam[2],
+    DataParam[3],
+    State->ConfigHandle
+    );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_HW_SYNCFLOOD
+ *
+ * @param[in] Node      The node on which the fault is reported
+ * @param[in] Link      The link from that node
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyAlertHwSyncFlood (
+  IN       UINT8        Node,
+  IN       UINT8        Link,
+  IN       STATE_DATA   *State
+  )
+{
+  HT_EVENT_DATA_HW_SYNCFLOOD Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  IDS_HDT_CONSOLE (HT_TRACE, "Sync Flood on Node %d Link %d.\n", Node, Link);
+  Evt.Node = Node;
+  Evt.Link = Link;
+  setEventNotify (AGESA_ALERT,
+                 HT_EVENT_HW_SYNCFLOOD,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_HW_HTCRC
+ *
+ * @param[in] Node      The node on which the error is reported
+ * @param[in] Link      The link from that node
+ * @param[in] LaneMask  The lanes which had CRC
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyAlertHwHtCrc (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      LaneMask,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_HW_HT_CRC Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  IDS_HDT_CONSOLE (HT_TRACE, "CRC Error on Node %d Link %d lanes %x.\n", Node, Link, LaneMask);
+  Evt.Node = Node;
+  Evt.Link = Link;
+  Evt.LaneMask = LaneMask;
+  setEventNotify (AGESA_ALERT,
+                 HT_EVENT_HW_HTCRC,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_NCOH_BUS_MAX_EXCEED
+ *
+ * @param[in] Node      The node on which the chain is located
+ * @param[in] Link      The link from that node
+ * @param[in] Bus       The bus number to assign
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyErrorNcohBusMaxExceed (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Bus,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_NCOH_BUS_MAX_EXCEED Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  Evt.Node = Node;
+  Evt.Link = Link;
+  Evt.Bus = Bus;
+  setEventNotify (AGESA_ERROR,
+                 HT_EVENT_NCOH_BUS_MAX_EXCEED,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_NCOH_CFG_MAP_EXCEED
+ *
+ * @param[in] Node      The node on which the chain is located
+ * @param[in] Link      The link from that node
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyErrorNcohCfgMapExceed (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_NCOH_CFG_MAP_EXCEED Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  Evt.Node = Node;
+  Evt.Link = Link;
+  setEventNotify (AGESA_ERROR,
+                 HT_EVENT_NCOH_CFG_MAP_EXCEED,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_NCOH_BUID_EXCEED
+ *
+ * @param[in] Node      The node on which the chain is located
+ * @param[in] Link      The link from that node
+ * @param[in] Depth     Position on chain
+ * @param[in] Id        The Id which was attempted to assigned
+ * @param[in] Units     The number of units in this device
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyErrorNcohBuidExceed (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Depth,
+  IN       UINT8      Id,
+  IN       UINT8      Units,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_NCOH_BUID_EXCEED Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  Evt.Node = Node;
+  Evt.Link = Link;
+  Evt.Depth = Depth;
+  Evt.CurrentBuid = Id;
+  Evt.UnitCount = Units;
+  setEventNotify (AGESA_ERROR,
+                 HT_EVENT_NCOH_BUID_EXCEED,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_NCOH_DEVICE_FAILED
+ *
+ * @param[in] Node      The node on which the chain is located
+ * @param[in] Link      The link from that node
+ * @param[in] Depth     Position on chain
+ * @param[in] Id        The Id which was attempted to assigned
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyErrorNcohDeviceFailed (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Depth,
+  IN       UINT8      Id,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_NCOH_DEVICE_FAILED Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  Evt.Node = Node;
+  Evt.Link = Link;
+  Evt.Depth = Depth;
+  Evt.AttemptedBuid = Id;
+  setEventNotify (AGESA_ERROR,
+                 HT_EVENT_NCOH_DEVICE_FAILED,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_NCOH_AUTO_DEPTH
+ *
+ * @param[in] Node      The node on which the chain is located
+ * @param[in] Link      The link from that node
+ * @param[in] Depth     Position on chain
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyInfoNcohAutoDepth (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Depth,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_NCOH_AUTO_DEPTH Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  Evt.Node = Node;
+  Evt.Link = Link;
+  Evt.Depth = Depth;
+  setEventNotify (AGESA_SUCCESS,
+                 HT_EVENT_NCOH_AUTO_DEPTH,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_OPT_REQUIRED_CAP_RETRY
+ *
+ * @param[in] Node      The node on which the chain is located
+ * @param[in] Link      The link from that node
+ * @param[in] Depth     Position on chain
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyWarningOptRequiredCapRetry (
+  IN       UINT8 Node,
+  IN       UINT8 Link,
+  IN       UINT8 Depth,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_OPT_REQUIRED_CAP Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  Evt.Node = Node;
+  Evt.Link = Link;
+  Evt.Depth = Depth;
+  setEventNotify (AGESA_WARNING,
+                 HT_EVENT_OPT_REQUIRED_CAP_RETRY,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_OPT_REQUIRED_CAP_GEN3
+ *
+ * @param[in] Node      The node on which the chain is located
+ * @param[in] Link      The link from that node
+ * @param[in] Depth     Position on chain
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyWarningOptRequiredCapGen3 (
+  IN       UINT8 Node,
+  IN       UINT8 Link,
+  IN       UINT8 Depth,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_OPT_REQUIRED_CAP Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  Evt.Node = Node;
+  Evt.Link = Link;
+  Evt.Depth = Depth;
+  setEventNotify (AGESA_WARNING,
+                 HT_EVENT_OPT_REQUIRED_CAP_GEN3,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_OPT_UNUSED_LINKS
+ *
+ * @param[in]  NodeA    One of the nodes connected
+ * @param[in]  NodeB    The other connected node
+ * @param[in]  LinkA    its unusable link
+ * @param[in]  LinkB    its unusable link
+ * @param[in]  State    our State
+ *
+ */
+VOID
+NotifyWarningOptUnusedLinks (
+  IN       UINT32    NodeA,
+  IN       UINT32    LinkA,
+  IN       UINT32    NodeB,
+  IN       UINT32    LinkB,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_OPT_UNUSED_LINKS Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  Evt.NodeA = NodeA;
+  Evt.LinkA = LinkA;
+  Evt.NodeB = NodeB;
+  Evt.LinkB = LinkB;
+  setEventNotify (AGESA_WARNING,
+                 HT_EVENT_OPT_UNUSED_LINKS,
+                 (UINT8 *)&Evt, State);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_OPT_LINK_PAIR_EXCEED
+ *
+ * @param[in]  NodeA      One of the nodes connected
+ * @param[in]  NodeB      The other connected node
+ * @param[in]  MasterLink its unusable Masterlink
+ * @param[in]  AltLink    its unusable Alternate link
+ * @param[in]  State      our State
+ *
+ */
+VOID
+NotifyWarningOptLinkPairExceed (
+  IN       UINT32    NodeA,
+  IN       UINT32    NodeB,
+  IN       UINT32    MasterLink,
+  IN       UINT32    AltLink,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_OPT_LINK_PAIR_EXCEED Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  Evt.NodeA = NodeA;
+  Evt.MasterLink = MasterLink;
+  Evt.NodeB = NodeB;
+  Evt.AltLink = AltLink;
+  setEventNotify (AGESA_WARNING,
+                 HT_EVENT_OPT_LINK_PAIR_EXCEED,
+                 (UINT8 *)&Evt, State);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_COH_NO_TOPOLOGY
+ *
+ * @param[in] Nodes     The total number of nodes found so far
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyErrorCohNoTopology (
+  IN       UINT8 Nodes,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_COH_NO_TOPOLOGY Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  IDS_HDT_CONSOLE (HT_TRACE, "No Topology Matched system with %d nodes found.\n", Nodes);
+  Evt.TotalNodes = Nodes;
+  setEventNotify (AGESA_ERROR,
+                 HT_EVENT_COH_NO_TOPOLOGY,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_COH_PROCESSOR_TYPE_MIX
+ *
+ * @param[in] Node      The node from which a new node was discovered
+ * @param[in] Link      The link from that node
+ * @param[in] Nodes     The total number of nodes found so far
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyFatalCohProcessorTypeMix (
+  IN       UINT8 Node,
+  IN       UINT8 Link,
+  IN       UINT8 Nodes,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_COH_PROCESSOR_TYPE_MIX Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  IDS_HDT_CONSOLE (HT_TRACE, "Illegal Processor Type Mix.\n");
+  Evt.Node = Node;
+  Evt.Link = Link;
+  Evt.TotalNodes = Nodes;
+  setEventNotify (AGESA_CRITICAL,
+                 HT_EVENT_COH_PROCESSOR_TYPE_MIX,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_COH_NODE_DISCOVERED
+ *
+ * @param[in] Node       Node from which a new node was discovered
+ * @param[in] Link       The link to that new node
+ * @param[in] NewNode    The new node's id
+ * @param[in] TempRoute  Temporarily, during discovery, the new node is accessed at this id.
+ * @param[in] State      our State
+ *
+ */
+VOID
+NotifyInfoCohNodeDiscovered (
+  IN       UINT8 Node,
+  IN       UINT8 Link,
+  IN       UINT8 NewNode,
+  IN       UINT8 TempRoute,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_COH_NODE_DISCOVERED Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  IDS_HDT_CONSOLE (HT_TRACE, "Adding Node %d.\n", NewNode);
+  Evt.Node = Node;
+  Evt.Link = Link;
+  Evt.NewNode = NewNode;
+  Evt.TempRoute = TempRoute;
+  setEventNotify (AGESA_SUCCESS,
+                 HT_EVENT_COH_NODE_DISCOVERED,
+                 (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_COH_MPCAP_MISMATCH
+ *
+ * @param[in] Node      The node from which a new node was discovered
+ * @param[in] Link      The link from that node
+ * @param[in] Cap       The aggregate system MP Capability
+ * @param[in] Nodes     The total number of nodes found so far
+ * @param[in] State     our State
+ *
+ */
+VOID
+NotifyFatalCohMpCapMismatch (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Cap,
+  IN       UINT8      Nodes,
+  IN       STATE_DATA *State
+  )
+{
+  HT_EVENT_DATA_COH_MP_CAP_MISMATCH Evt;
+  // Zero out the event data
+  LibAmdMemFill (
+    &Evt,
+    0,
+    (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+    State->ConfigHandle
+    );
+
+  IDS_HDT_CONSOLE (HT_TRACE, "Mp Capability Mismatch.\n");
+  Evt.Node = Node;
+  Evt.Link = Link;
+  Evt.SysMpCap = Cap;
+  Evt.TotalNodes = Nodes;
+  setEventNotify (AGESA_CRITICAL,
+                 HT_EVENT_COH_MPCAP_MISMATCH,
+                 (UINT8 *)&Evt, State);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htNotify.h b/src/vendorcode/amd/agesa/f15/Proc/HT/htNotify.h
new file mode 100644
index 0000000000..9e284455e1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htNotify.h
@@ -0,0 +1,298 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HT Notify interface.
+ *
+ * This file provides internal interface to event and status
+ * notification.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $        @e  \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_NOTIFY_H_
+#define _HT_NOTIFY_H_
+
+/*----------------------------------------------------------------------------------------*/
+/* Event specific event data definitions.
+ * All structures must be 4 UINT32's in size, no more, no less.
+ */
+
+/// For event ::HT_EVENT_HW_SYNCFLOOD
+typedef struct {
+  UINT32 Node;                   ///< The Node on which observed
+  UINT32 Link;                   ///< The Link on that Node which reported synch flood
+  UINT32 Reserved1;              ///< Reserved.
+  UINT32 Reserved2;              ///< Reserved.
+} HT_EVENT_DATA_HW_SYNCFLOOD;
+
+/// For event ::HT_EVENT_HW_HTCRC
+typedef struct {
+  UINT32 Node;                   ///< The Node on which event is observed
+  UINT32 Link;                   ///< The Link on that Node which reported CRC error
+  UINT32 LaneMask;               ///< The CRC lane mask for the Link
+  UINT32 Reserved1;              ///< Reserved.
+} HT_EVENT_DATA_HW_HT_CRC;
+
+/// For event ::HT_EVENT_NCOH_BUS_MAX_EXCEED
+typedef struct {
+  UINT32 Node;                   ///< the Node with this non-coherent chain
+  UINT32 Link;                   ///< the Link on that Node to this chain
+  UINT32 Bus;                    ///< the current bus number
+  UINT32 Reserved1;              ///< Reserved.
+} HT_EVENT_DATA_NCOH_BUS_MAX_EXCEED;
+
+/// For event ::HT_EVENT_NCOH_CFG_MAP_EXCEED
+typedef struct {
+  UINT32 Node;                   ///< the Node with this non-coherent chain
+  UINT32 Link;                   ///< the Link on that Node to this chain
+  UINT32 Reserved1;              ///< Reserved.
+  UINT32 Reserved2;              ///< Reserved.
+} HT_EVENT_DATA_NCOH_CFG_MAP_EXCEED;
+
+/// For event ::HT_EVENT_NCOH_BUID_EXCEED
+typedef struct {
+  UINT32 Node;                   ///< the Node with this non-coherent chain
+  UINT32 Link;                   ///< the Link on that Node to this chain
+  UINT32 Depth;                  ///< the position on the chain, zero is CPU host
+  UINT16 CurrentBuid;            ///< the current available BUID
+  UINT16 UnitCount;              ///< the number of ids which would be consumed by this device
+} HT_EVENT_DATA_NCOH_BUID_EXCEED;
+
+/// For event ::HT_EVENT_NCOH_DEVICE_FAILED
+typedef struct {
+  UINT32 Node;                   ///< the Node with this non-coherent chain
+  UINT32 Link;                   ///< the Link on that Node to this chain
+  UINT32 Depth;                  ///< the position on the chain, zero is CPU host
+  UINT32 AttemptedBuid;          ///< the BUID we tried to assign to that device
+} HT_EVENT_DATA_NCOH_DEVICE_FAILED;
+
+/// For event ::HT_EVENT_NCOH_AUTO_DEPTH
+typedef struct {
+  UINT32 Node;                   ///< the Node with this non-coherent chain
+  UINT32 Link;                   ///< the Link on that Node to this chain
+  UINT32 Depth;                  ///< the position on the chain of the last device, zero is CPU host
+  UINT32 Reserved1;              ///< Reserved.
+} HT_EVENT_DATA_NCOH_AUTO_DEPTH;
+
+/// For event ::HT_EVENT_OPT_REQUIRED_CAP_RETRY,
+///           ::HT_EVENT_OPT_REQUIRED_CAP_GEN3.
+typedef struct {
+  UINT32 Node;                   ///< the Node with this non-coherent chain
+  UINT32 Link;                   ///< the Link on that Node to this chain
+  UINT32 Depth;                  ///< the position on the chain, zero is CPU host
+  UINT32 Reserved1;              ///< Reserved.
+} HT_EVENT_DATA_OPT_REQUIRED_CAP;
+
+/// For event ::HT_EVENT_OPT_UNUSED_LINKS
+typedef struct {
+  UINT32 NodeA;                  ///< One of the nodes connected
+  UINT32 LinkA;                  ///< its unusable link
+  UINT32 NodeB;                  ///< The other connected node
+  UINT32 LinkB;                  ///< its unusable link
+} HT_EVENT_DATA_OPT_UNUSED_LINKS;
+
+/// For event ::HT_EVENT_OPT_LINK_PAIR_EXCEED
+typedef struct {
+  UINT32 NodeA;                  ///< One of the nodes connected
+  UINT32 NodeB;                  ///< The other connected node
+  UINT32 MasterLink;             ///< NodeA's unusable Master link
+  UINT32 AltLink;                ///< NodeA's unusable Alternatelink
+} HT_EVENT_DATA_OPT_LINK_PAIR_EXCEED;
+
+/// For event ::HT_EVENT_COH_NO_TOPOLOGY.
+/// There is no routing for this system's topology.
+typedef struct {
+  UINT32 TotalNodes;             ///< the number of Nodes in the unmatched topology
+  UINT32 Reserved1;              ///< Reserved.
+  UINT32 Reserved2;              ///< Reserved.
+  UINT32 Reserved3;              ///< Reserved.
+} HT_EVENT_DATA_COH_NO_TOPOLOGY;
+
+/// For event ::HT_EVENT_COH_PROCESSOR_TYPE_MIX
+typedef struct {
+  UINT32 Node;                   ///< the Node from which the incompatible family was found
+  UINT32 Link;                   ///< the Link to the incompatible Node
+  UINT32 TotalNodes;             ///< the number of Nodes found at that point
+  UINT32 Reserved1;              ///< Reserved.
+} HT_EVENT_DATA_COH_PROCESSOR_TYPE_MIX;
+
+/// For event ::HT_EVENT_COH_NODE_DISCOVERED
+typedef struct {
+  UINT32 Node;                   ///< the Node from which the new Node was found
+  UINT32 Link;                   ///< the Link to the new Node
+  UINT32 NewNode;                ///< the Node id of the newly discovered Node
+  UINT32 TempRoute;              ///< the new Node is temporarily at this id
+} HT_EVENT_DATA_COH_NODE_DISCOVERED;
+
+/// For event ::HT_EVENT_COH_MPCAP_MISMATCH
+typedef struct {
+  UINT32 Node;                   ///< the Node from which condition was observed
+  UINT32 Link;                   ///< the Link on the current Node
+  UINT32 SysMpCap;               ///< the current aggregate system capability (the minimum found so far)
+  UINT32 TotalNodes;             ///< the number of Nodes found, before this was observed
+} HT_EVENT_DATA_COH_MP_CAP_MISMATCH;
+
+/*----------------------------------------------------------------------------------------*/
+/* Event specific Notify functions.
+ */
+
+VOID
+NotifyAlertHwSyncFlood (
+  IN       UINT8        Node,
+  IN       UINT8        Link,
+  IN       STATE_DATA   *State
+  );
+
+VOID
+NotifyAlertHwHtCrc (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      LaneMask,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyErrorNcohBusMaxExceed (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Bus,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyErrorNcohCfgMapExceed (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyErrorNcohBuidExceed (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Depth,
+  IN       UINT8      Id,
+  IN       UINT8      Units,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyErrorNcohDeviceFailed (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Depth,
+  IN       UINT8      Id,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyInfoNcohAutoDepth (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Depth,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyWarningOptRequiredCapRetry (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Depth,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyWarningOptRequiredCapGen3 (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Depth,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyWarningOptUnusedLinks (
+  IN       UINT32    NodeA,
+  IN       UINT32    LinkA,
+  IN       UINT32    NodeB,
+  IN       UINT32    LinkB,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyWarningOptLinkPairExceed (
+  IN       UINT32    NodeA,
+  IN       UINT32    NodeB,
+  IN       UINT32    MasterLink,
+  IN       UINT32    AltLink,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyErrorCohNoTopology (
+  IN       UINT8      Nodes,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyFatalCohProcessorTypeMix (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Nodes,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyInfoCohNodeDiscovered (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      NewNode,
+  IN       UINT8      TempRoute,
+  IN       STATE_DATA *State
+  );
+
+VOID
+NotifyFatalCohMpCapMismatch (
+  IN       UINT8      Node,
+  IN       UINT8      Link,
+  IN       UINT8      Cap,
+  IN       UINT8      Nodes,
+  IN       STATE_DATA *State
+  );
+
+#endif /* _HT_NOTIFY_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htPage.h b/src/vendorcode/amd/agesa/f15/Proc/HT/htPage.h
new file mode 100644
index 0000000000..77021be051
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htPage.h
@@ -0,0 +1,65 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Create outline and references for HyperTransport Component mainpage documentation.
+ *
+ * Design guides, maintenance guides, and general documentation, are
+ * collected using this file onto the documentation mainpage.
+ * This file contains doxygen comment blocks, only.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Documentation
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/**
+ * @page htmain HyperTransport Component Documentation
+ *
+ * Additional documentation for the HyperTransport component consists of
+ *
+ * - Member Cross References
+ *   - @subpage instanceshtnb "HT Northbridge Method Instances"
+ * - Maintenance Guides:
+ *   - @subpage htimplintf "HT Internal Interface Implementation Guide"
+ *   - @subpage htimplfeat "HT Feature Implementation Guide"
+ *   - @subpage htimplnb   "HT Northbridge Implementation Guide"
+ *   - add here >>>
+ * - Design Guides:
+ *   - @subpage htgraphdesign "Graph Support Design"
+ *   - @subpage physicalsockethowto "How to Create a Physical System Socket Map"
+ *   - add here >>>
+ *
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/HT/htTopologies.h b/src/vendorcode/amd/agesa/f15/Proc/HT/htTopologies.h
new file mode 100644
index 0000000000..0062bdeda2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/HT/htTopologies.h
@@ -0,0 +1,72 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Provide selection of available topologies.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+#ifndef _HT_TOPOLOGIES_H_
+#define _HT_TOPOLOGIES_H_
+
+extern CONST UINT8 ROMDATA amdHtTopologySingleNode[];
+extern CONST UINT8 ROMDATA amdHtTopologyDualNode[];
+extern CONST UINT8 ROMDATA amdHtTopologyThreeLine[];
+extern CONST UINT8 ROMDATA amdHtTopologyTriangle[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourLine[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourStar[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourDegenerate[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourSquare[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourKite[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourFully[];
+extern CONST UINT8 ROMDATA amdHtTopologyFiveFully[];
+extern CONST UINT8 ROMDATA amdHtTopologyFiveTwistedLadder[];
+extern CONST UINT8 ROMDATA amdHtTopologySixFully[];
+extern CONST UINT8 ROMDATA amdHtTopologySixDoubloonLower[];
+extern CONST UINT8 ROMDATA amdHtTopologySixDoubloonUpper[];
+extern CONST UINT8 ROMDATA amdHtTopologySixTwistedLadder[];
+extern CONST UINT8 ROMDATA amdHtTopologySevenFully[];
+extern CONST UINT8 ROMDATA amdHtTopologySevenTwistedLadder[];
+extern CONST UINT8 ROMDATA amdHtTopologyEightFully[];
+extern CONST UINT8 ROMDATA amdHtTopologyEightDoubloon[];
+extern CONST UINT8 ROMDATA amdHtTopologyEightTwistedLadder[];
+extern CONST UINT8 ROMDATA amdHtTopologyEightStraightLadder[];
+extern CONST UINT8 ROMDATA amdHtTopologySixTwinTriangles[];
+extern CONST UINT8 ROMDATA amdHtTopologyEightTwinFullyFourWays[];
+
+#endif // _HT_TOPOLOGIES_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/IDS/IdsLib.h b/src/vendorcode/amd/agesa/f15/Proc/IDS/IdsLib.h
new file mode 100644
index 0000000000..d72eb2e968
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/IDS/IdsLib.h
@@ -0,0 +1,125 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD IDS Routines
+ *
+ * Contains AMD AGESA Integrated Debug Macros
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  IDS
+ * @e \$Revision: 55552 $   @e \$Date: 2011-06-22 09:31:58 -0600 (Wed, 22 Jun 2011) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+
+#ifndef _IDS_LIB_H_
+#define _IDS_LIB_H_
+#include "OptionsIds.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "Table.h"
+///Specific time stamp performance analysis which need ids control support
+#if IDSOPT_CONTROL_ENABLED == TRUE
+  #define PERF_SPEC_TS_ANALYSE(StdHeader)
+#else
+  #define PERF_SPEC_TS_ANALYSE(StdHeader)
+#endif
+
+
+#define IDS_NV_READ_SKIP(NvValue, Nvid, IdsNvPtr, StdHeader)
+#define IDS_GET_MASK32(HighBit, LowBit)
+
+#define IDS_MAX_MEM_ITEMS   80     ///< Maximum IDS Mem Table Size in Heap.
+///Macro for Ids family feat
+#define MAKE_IDS_FAMILY_FEAT_ALL_CORES(FEAT_ID, FAMILY, FUNCTION) \
+        {IDS_FEAT_COMMON, IDS_ALL_CORES, FEAT_ID, FAMILY, FUNCTION}
+
+
+// TYPEDEFS, STRUCTURES, ENUMS
+//
+
+typedef AGESA_STATUS (*PF_IDS_AP_TASK) (VOID *AptaskPara, AMD_CONFIG_PARAMS *StdHeader);
+
+///Structure define for IdsAgesaRunFcnOnApLate
+typedef struct _IDSAPLATETASK {
+  PF_IDS_AP_TASK  ApTask; ///< Point function which AP need to do
+  VOID *ApTaskPara; ///< Point to Ap function parameter1
+} IDSAPLATETASK;
+
+/// Data Structure defining IDS Data in HEAP
+/// This data structure contains information that is stored in HEAP and will be
+/// used in IDS backend function. It includes the size of memory to be allocated
+/// for IDS, the relative offsets of the mapping table IDS setup options, the GRA
+/// table and the register table to override mem setting. It also includes a base
+/// address of IDS override image which will be used to control the behavior of
+/// AGESA testpoint if this feature is enabled.
+typedef struct {
+  BOOLEAN IgnoreIdsDefault;             ///< Control ignore Default value of IDS NV list specified by IdsNvTableOffset
+  UINT64 IdsImageBase;                 ///< IDS Override Image Base Address
+  UINT32 IdsHeapMemSize;              ///< IDS Total Memory Size in Heap
+  UINT32 IdsNvTableOffset;            ///< Offset of IDS NV Table
+  UINT32 IdsMemTableOffset;           ///< Offset of IDS Mem Table
+  UINT32 IdsExtendOffset;                ///< Offset of Ids extend heap
+} IDS_CONTROL_STRUCT;
+
+
+/// Data Structure of Parameters for TestPoint_TSC.
+typedef struct {
+  UINT8 TestPoint;                    ///< The TestPoint of TestPoint_TSC
+  UINT64 StartTsc;                  ///< The StartTimer of TestPoint_TSC
+} TestPoint_TSC;
+
+/// Data Structure of Parameters for TP_Perf_STRUCT.
+typedef struct {
+  UINT8 Index;                    ///< The Index of TP_Perf_STRUCT
+  UINT32 TscInMhz;            ///< Tsc counter in 1 mhz
+  TestPoint_TSC TP[EndAgesaTps];       ///< The TP of TP_Perf_STRUCT
+} TP_Perf_STRUCT;
+
+
+///Bus speed Optimization
+typedef enum {
+  IDS_POWER_POLICY_PERFORMANCE = 0,              ///< Performance
+  IDS_POWER_POLICY_POWER = 1,              ///< Power
+  IDS_POWER_POLICY_AUTO = 3,              ///< Auto
+} IDS_NV_AMDBUSSPEEDOPTIMIZATION;
+
+
+#define IDS_ALL_SOCKET 0xFF
+#define IDS_ALL_MODULE 0xFF
+#define IDS_ALL_CORE   0xFF
+#define IDS_ALL_DCT   0xFF
+
+#define IDS_CPB_BOOST_DIS_IGNORE  0xFFFFFFFF
+
+#endif //_IDS_LIB_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/IDS/IdsPage.h b/src/vendorcode/amd/agesa/f15/Proc/IDS/IdsPage.h
new file mode 100644
index 0000000000..03553b8230
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/IDS/IdsPage.h
@@ -0,0 +1,58 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Create outline and references for Integrated Debug Support Component mainpage documentation.
+ *
+ * Design guides, maintenance guides, and general documentation, are
+ * collected using this file onto the documentation mainpage.
+ * This file contains doxygen comment blocks, only.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Documentation
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/**
+ * @page idsmain Integrated Debug Support Component Documentation
+ *
+ * Additional documentation for the Integrated Debug Support component consists of
+ *
+ * - Maintenance Guides:
+ *   - add here >>>
+ * - Design Guides:
+ *   - add here >>>
+ *
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/IDS/OptionsIds.h b/src/vendorcode/amd/agesa/f15/Proc/IDS/OptionsIds.h
new file mode 100644
index 0000000000..71bd917908
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/IDS/OptionsIds.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ***************************************************************************/
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ *  This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ *    IDSOPT_IDS_ENABLED
+ *    IDSOPT_ERROR_TRAP_ENABLED
+ *    IDSOPT_CONTROL_ENABLED
+ *
+ *      Warning: When you enable the IDSOPT_CONTROL_NV_TO_CMOS feature.
+ *      please make the cmos region defined by IDS_OPT_CMOS_REGION_START &
+ *      IDS_OPT_CMOS_REGION_END can be touched between IDS HOOK point
+ *      IDS_CPU_Early_Override and IDS_BEFORE_AP_EARLY_HALT of BSP
+ *
+ *      IDSOPT_CONTROL_NV_TO_CMOS
+ *        IDS_OPT_CMOS_INDEX_PORT
+ *        IDS_OPT_CMOS_DATA_PORT
+ *        IDS_OPT_CMOS_REGION_START
+ *        IDS_OPT_CMOS_REGION_END
+ *
+ *    IDSOPT_TRACING_ENABLED
+ *    IDSOPT_TRACE_BLD_CFG
+ *    IDSOPT_PERF_ANALYSIS
+ *    IDSOPT_ASSERT_ENABLED
+ *    IDS_DEBUG_PORT
+ *    IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ *    IDSOPT_DEBUG_CODE_ENABLED
+ *    IDSOPT_IDT_EXCEPTION_TRAP
+ *    IDSOPT_C_OPTIMIZATION_DISABLED
+ *
+ **/
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/C32/marc32_3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/C32/marc32_3.c
new file mode 100644
index 0000000000..fa76b1fa6c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/C32/marc32_3.c
@@ -0,0 +1,593 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * marc32_3.c
+ *
+ * Memory Controller, registered dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support AM3 */
+
+
+#include "AGESA.h"
+#include "ma.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_C32_MARC32_3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA C32RDdr3CLKDis[] = {0xFF, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00};
+
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA C32RDdr3CKETri[] = {0x55, 0xAA};
+
+// 2 dimms per channel
+// Dimm 0: BP_MEMODTx[2,0]
+// Dimm 1: BP_MEMODTx[3,1]
+STATIC CONST UINT8 ROMDATA C32RDdr3ODTTri2D[] = {0x03, 0x0C, 0x32, 0xC8};
+// 3 dimms per channel
+// Dimm 0: BP_MEMODTx[0]
+// Dimm 1: BP_MEMODTx[3,1]
+// Dimm 2: BP_MEMODTx[2]
+STATIC CONST UINT8 ROMDATA C32RDdr3ODTTri3D[] = {0x03, 0x0C, 0x30, 0xC8};
+// 4 dimms per channel
+// Dimm 0: BP_MEMODTx[0]
+// Dimm 1: BP_MEMODTx[1]
+// Dimm 2: BP_MEMODTx[2]
+// Dimm 3: BP_MEMODTx[3]
+STATIC CONST UINT8 ROMDATA C32RDdr3ODTTri4D[] = {0x03, 0x0C, 0x30, 0xC0};
+
+// BIOS must not tri-state chip select pin corresponding to the second chip
+// select of a single rank registered dimm
+STATIC CONST UINT8 ROMDATA C32RDdr3CSTri[] = {0x01, 0x03, 0x04, 0x0C, 0x10, 0x30, 0x40, 0xC0};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for C32 DDR3 L1 system
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID        Socket number
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to C32 MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to C32 CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to C32 ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to C32 CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgRC32_3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  //
+  // Address Timings and Drive Strengths for 1 DIMM per channel or 2 Dimms per Channel
+  //
+  // Code searches table for matching speed, then matches the current dimm
+  // population and # of dimms to current config and programs the Addr Timing and RC2/RC2
+  //
+  // RC2/RC8 Value - This field id dependent upon the number of Registers on the Dimm, as indicated
+  //                 in SPD Byte 63.
+  //                 Bits 15-12       RC2 if One register
+  //                 Bits 11-8        RC8 if One register
+  //                 Bits 7-4         RC2 for more than one register
+  //                 Bits 3-0         RC8 for more than one register
+  //
+  // Frequency, Dimm Config ,
+  // Address Timing Value(F2x[1, 0]9C_x04), RC2/RC8 Value, # Dimms to match
+  //
+  STATIC CONST ADV_R_PSCFG_ENTRY PSCfg2DIMMs[] = {
+     {DDR667_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \
+       0x00000000, 0x4004, 2},
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x00000000, 0x0000, 1},
+     {DDR800_FREQUENCY, QR_DIMM1, \
+       0x00000000, 0x0040, 1},
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x00000000, 0x4004, 2},
+     {DDR800_FREQUENCY, QR_DIMM0 + ANY_DIMM1, \
+       0x00000000, 0x4004, 2},
+     {DDR800_FREQUENCY, ANY_DIMM0 + QR_DIMM1, \
+       0x00000000, 0x4004, 2},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x003C3C3C, 0x0000,1},
+     {DDR1066_FREQUENCY, QR_DIMM0 + QR_DIMM1, \
+       0x003C3C3C, 0x0040, 1},
+     {DDR1066_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \
+       0x003A3C3A, 0x4004, 2},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x003A3A3A, 0x0000, 1},
+     {DDR1333_FREQUENCY, QR_DIMM0 + QR_DIMM1, \
+       0x003A3A3A, 0x0040, 1},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x00383A38, 0x4040, 2},
+  };
+  //
+  // Address Timings and Drive Strengths for 3 DIMMs per channel
+  //
+  // Code searches table for matching speed, then matches the current dimm
+  // population and # of dimms to current config and programs the Addr Timing and RC2/RC2
+  //
+  // RC2/RC8 Value - This field id dependent upon the number of Registers on the Dimm, as indicated
+  //                 in SPD Byte 63.
+  //                 Bits 15-12       RC2 if One register
+  //                 Bits 11-8        RC8 if One register
+  //                 Bits 7-4         RC2 for more than one register
+  //                 Bits 3-0         RC8 for more than one register
+  //
+  // Frequency, Dimm Config ,
+  // Address Timing Value(F2x[1, 0]9C_x04), RC2/RC8 Value, # Dimms to match
+  //
+  STATIC CONST ADV_R_PSCFG_ENTRY PSCfg3DIMMs[] = {
+     {DDR667_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x0000, 1},
+     {DDR667_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x4040, 2},
+     {DDR667_FREQUENCY, QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x4004, 2},
+     {DDR667_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00380038, 0x4004, 3},
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x0000, 1},
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x4040, 2},
+     {DDR800_FREQUENCY, QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x4004, 2},
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00380038, 0x4004, 3},
+     {DDR800_FREQUENCY, QR_DIMM1, \
+       0x00000000, 0x0040, 1},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x003C3C3C, 0x0000, 1},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, \
+       0x003A3C3A, 0x4040, 2},
+     {DDR1066_FREQUENCY, SR_DIMM0 + SR_DIMM1 + SR_DIMM2, \
+       0x00373C37, 0x4040, 3},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x003A3A3A, 0x0000, 1},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, \
+       0x00383A38, 0x4040, 2},
+  };
+
+  //
+  // DIMM ODT Pattern (1 or 2 DIMMs per channel)
+  //
+  // Dimm Config ,
+  // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match
+  //
+  STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg2DIMMsODT[] = {
+    {SR_DIMM0, \
+      0x00000000, 0x00000000, 0x00000001, 0x00000000, 1},
+    {DR_DIMM0, \
+      0x00000000, 0x00000000, 0x00000104, 0x00000000, 1},
+    {QR_DIMM0, \
+      0x00000000, 0x00000000, 0x00000505, 0x00000505, 1},
+    {SR_DIMM1, \
+      0x00000000, 0x00000000, 0x00020000, 0x00000000, 1},
+    {DR_DIMM1, \
+      0x00000000, 0x00000000, 0x02080000, 0x00000000, 1},
+    {QR_DIMM1, \
+      0x00000000, 0x00000000, 0x0A0A0000, 0x0A0A0000, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+      0x01010202, 0x00000000, 0x09030603, 0x00000000, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, \
+      0x01010A0A, 0x01010000, 0x01030E0B, 0x01090000, 2},
+    {QR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+      0x05050202, 0x00000202, 0x0D070203, 0x00000206, 2},
+    {QR_DIMM0 + QR_DIMM1, \
+      0x05050A0A, 0x05050A0A, 0x05070A0B, 0x050D0A0E, 2}
+  };
+  // DIMM ODT Pattern (3 DIMMs per channel)
+  //
+  // Dimm Config ,
+  // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match
+  //
+  STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg3DIMMsODT[] = {
+    {SR_DIMM2 + DR_DIMM2, \
+      0x00000000, 0x00000000, 0x00000000, 0x00000404, 1},
+    {SR_DIMM0 + DR_DIMM0, \
+      0x00000000, 0x00000000, 0x00000101, 0x00000000, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, \
+      0x00000404, 0x00000101, 0x00000405, 0x00000105, 2},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+      0x05050606, 0x00000303, 0x0D070607, 0x00000307, 3},
+    {QR_DIMM1, \
+      0x00000000, 0x00000000, 0x080A0000, 0x020A0000, 1},
+    {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+      0x04040000, 0x04040A0A, 0x04060000, 0x040C0A0E, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, \
+      0x01010A0A, 0x01010000, 0x01030A0B, 0x01090000, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+      0x05050E0E, 0x05050B0B, 0x05070E0F, 0x050D0B0F, 3}
+  };
+  //
+  // DIMM ODT Pattern (4 DIMMs per channel)
+  //
+  // Dimm Config ,
+  // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match
+  //
+  STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg4DIMMsODT[] = {
+    {ANY_DIMM3, \
+      0x00000000, 0x00000000, 0x00000000, 0x08080000, 1},
+    {ANY_DIMM2 + ANY_DIMM3, \
+      0x00000000, 0x04040808, 0x00000000, 0x0C0C0C0C, 2},
+    {ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, \
+      0x0C0C0000, 0x06060A0A, 0x0E0E0000, 0x0E0E0E0E, 3},
+    {ANY_DIMM0 + ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, \
+      0x0D0D0E0E, 0x07070B0B, 0x0F0F0F0F, 0x0F0F0F0F, 4}
+  };
+  //
+  // DIMM Write Leveling ODT Pattern 1 or 2 Dimms Per Channel
+  //
+  // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match
+  //
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg2DIMMsWlODT[] = {
+    {SR_DIMM0,            {0x01, 0x00, 0x00, 0x00}, 1},
+    {DR_DIMM0,            {0x04, 0x00, 0x00, 0x00}, 1},
+    {QR_DIMM0,            {0x05, 0x00, 0x00, 0x00}, 1},
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {QR_DIMM1,            {0x00, 0x0A, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2},
+    {SR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {QR_DIMM0 + SR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2},
+    {QR_DIMM0 + DR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2},
+    {QR_DIMM0 + QR_DIMM1, {0x0B, 0x07, 0x0E, 0x0D}, 2}
+  };
+  //
+  // DIMM Write Leveling ODT Pattern 3 Dimms Per Channel
+  //
+  // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match
+  //
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg3DIMMsWlODT[] = {
+    {SR_DIMM2 + DR_DIMM2, {0x00, 0x00, 0x04, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0, {0x01, 0x02, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, {0x05, 0x00, 0x05, 0x00}, 2},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x07, 0x07, 0x07, 0x00}, 3},
+    {QR_DIMM1, {0x00, 0x0A, 0x00, 0x0A}, 1},
+    {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x00, 0x06, 0x0E, 0x0C}, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x0F, 0x07, 0x0F, 0x0D}, 3}
+  };
+  //
+  // DIMM Write Leveling ODT Pattern 4 Dimms Per Channel
+  //
+  // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match
+  //
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg4DIMMsWlODT[] = {
+    {ANY_DIMM3, {0x00, 0x00, 0x00, 0x08}, 1},
+    {ANY_DIMM2 + ANY_DIMM3, {0x00, 0x00, 0x0C, 0x0C}, 2},
+    {ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x00, 0x0E, 0x0E, 0x0E}, 3},
+    {ANY_DIMM0 + ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x0F, 0x0F, 0x0F, 0x0F}, 4}
+  };
+
+
+  UINT16 i;
+  UINT16 j;
+  UINT8  MaxDimmPerCH;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT8 DimmTpMatch;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT16 RC2RC8;
+  UINT32 PhyRODTCSLow;
+  UINT32 PhyRODTCSHigh;
+  UINT32 PhyWODTCSLow;
+  UINT32 PhyWODTCSHigh;
+  BOOLEAN SlowMode;
+  UINT8 PSCfgSize;
+  UINT8 PSCfgODTSize;
+  UINT8 PSCfgWlODTSize;
+  UINT8 PhyWLODT[4];
+
+  CONST ADV_R_PSCFG_ENTRY *PSCfgPtr;
+  CONST ADV_PSCFG_ODT_ENTRY *PSCfgODTPtr;
+  CONST ADV_R_PSCFG_WL_ODT_ENTRY *PSCfgWlODTPtr;
+  UINT8 *DimmsPerChPtr;
+
+  ASSERT (MemData != NULL);
+  ASSERT (CurrentChannel != NULL);
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  RC2RC8 = 0;
+  PhyRODTCSLow = 0;
+  PhyRODTCSHigh = 0;
+  PhyWODTCSLow = 0;
+  PhyWODTCSHigh = 0;
+  SlowMode = FALSE;
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_C32) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->RegDimmPresent == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  // Prepare inputs
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+
+  DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  if (MaxDimmPerCH == 4) {
+    PSCfgPtr = NULL;
+    PSCfgSize = 0;
+    PSCfgODTPtr = PSCfg4DIMMsODT;
+    PSCfgWlODTPtr = PSCfg4DIMMsWlODT;
+    PSCfgODTSize = sizeof (PSCfg4DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY);
+    PSCfgWlODTSize = sizeof (PSCfg4DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  } else if (MaxDimmPerCH == 3) {
+    PSCfgPtr = PSCfg3DIMMs;
+    PSCfgSize = sizeof (PSCfg3DIMMs) / sizeof (ADV_R_PSCFG_ENTRY);
+    PSCfgODTPtr = PSCfg3DIMMsODT;
+    PSCfgWlODTPtr = PSCfg3DIMMsWlODT;
+    PSCfgODTSize = sizeof (PSCfg3DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY);
+    PSCfgWlODTSize = sizeof (PSCfg3DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  } else {
+    PSCfgPtr = PSCfg2DIMMs;
+    PSCfgSize = sizeof (PSCfg2DIMMs) / sizeof (ADV_R_PSCFG_ENTRY);
+    PSCfgODTPtr = PSCfg2DIMMsODT;
+    PSCfgWlODTPtr = PSCfg2DIMMsWlODT;
+    PSCfgODTSize = sizeof (PSCfg2DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY);
+    PSCfgWlODTSize = sizeof (PSCfg2DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  }
+
+  // AddrTmgCTL and DctOdcCtl
+  if (MaxDimmPerCH != 4) {
+    for (i = 0; i < PSCfgSize; i++, PSCfgPtr++) {
+      if ((Speed != PSCfgPtr->Speed) || (Dimms != PSCfgPtr->Dimms)) {
+        continue;
+      }
+      DimmTpMatch = 0;
+      _DIMMRankType = DIMMRankType & PSCfgPtr->DIMMRankType;
+      for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+        if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+          DimmTpMatch++;
+        }
+      }
+      if (DimmTpMatch == PSCfgPtr->Dimms) {
+        AddrTmgCTL = PSCfgPtr->AddrTmg;
+        DctOdcCtl = 0x00223222;
+        RC2RC8 = PSCfgPtr->RC2RC8;
+        break;
+      }
+    }
+  }
+
+  //
+  // Overrides and/or exceptions
+  //
+  //
+  // Count slots with SR/DR poulated.
+  //
+  DimmTpMatch = 0;
+  for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+    if ((DIMMRankType & (UINT16) 0x03 << (j << 2)) != 0) {
+      DimmTpMatch++;
+    }
+  }
+  //
+  // DimmTpMatch is equal to the count of  slot that have either an SR or DR
+  // installed.
+  //
+  if (MaxDimmPerCH == 4) {
+    //
+    // Any SR/DR in 4 DPCH
+    //
+    if (DimmTpMatch > 0) {
+      DctOdcCtl = 0x00223222;
+      if ((Speed == DDR800_FREQUENCY) && (DimmTpMatch == 1)) {
+        DctOdcCtl = 0x00113222;
+      }
+    }
+    //
+    // At Least 3 SR/DR in 4 DPCH
+    //
+    if (DimmTpMatch >= 3) {
+      AddrTmgCTL |= 0x002F0000;
+    }
+    // At Least 2 SR/DR in 4 DPCH
+    if (DimmTpMatch >= 2) {
+      RC2RC8 = 0x4040;
+    }
+  } else {
+    //
+    // Less than 4 DPCH
+    //
+    //
+    // Only 1 Dimm Populated and its a SR or DR OR
+    //   3 Dimms Populated and Frequency is 800 MHz
+    //
+    if (((Dimms == 1) && (DimmTpMatch == 1)) ||
+      ((Dimms == 3) && ((Speed == DDR800_FREQUENCY) ||
+       (Speed == DDR1066_FREQUENCY)))) {
+        DctOdcCtl = 0x00113222;
+    }
+  }
+
+  //RC2 and RC8
+  for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+    // CtrlWrd02(s) will contain the info. of SPD byte 63 after MemTDIMMPresence3 execution.
+    if (CurrentChannel->CtrlWrd02[j] > 0) {
+      if (CurrentChannel->CtrlWrd02[j] == 1) {
+        // Store real RC2 and RC8 value (High byte) into CtrlWrd02(s) and CtrlWrd08(s).
+        CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 12) & 0x000F;
+        CurrentChannel->CtrlWrd08[j] = (UINT8) (RC2RC8 >> 8) & 0x000F;
+      } else {
+        // Store real RC2 and RC8 value (low byte) into CtrlWrd02(s) and CtrlWrd08(s).
+        CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 4) & 0x000F;
+        CurrentChannel->CtrlWrd08[j] = (UINT8) RC2RC8 & 0x000F;
+      }
+    }
+  }
+
+  //Programmable ODT
+  for (i = 0; i  < PSCfgODTSize; i++, PSCfgODTPtr++) {
+    if (Dimms != PSCfgODTPtr->Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgODTPtr->DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgODTPtr->Dimms) {
+      PhyRODTCSLow = PSCfgODTPtr->PhyRODTCSLow;
+      PhyRODTCSHigh = PSCfgODTPtr->PhyRODTCSHigh;
+      PhyWODTCSLow = PSCfgODTPtr->PhyWODTCSLow;
+      PhyWODTCSHigh = PSCfgODTPtr->PhyWODTCSHigh;
+      break;
+    }
+  }
+
+  //WLODT
+  for (i = 0; i  < PSCfgWlODTSize; i++, PSCfgWlODTPtr++) {
+    if (Dimms != PSCfgWlODTPtr->Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgWlODTPtr->DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgWlODTPtr->Dimms) {
+      PhyWLODT[0] = PSCfgWlODTPtr->PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgWlODTPtr->PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgWlODTPtr->PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgWlODTPtr->PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  // Set ProcODT
+  DctOdcCtl |= 0x20000000;
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) C32RDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) C32RDdr3CKETri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) C32RDdr3CSTri;
+
+  switch (MaxDimmPerCH) {
+  case 3:
+    CurrentChannel->ODTTriMap = (UINT8 *) C32RDdr3ODTTri3D;
+    break;
+  case 4:
+    CurrentChannel->ODTTriMap = (UINT8 *) C32RDdr3ODTTri4D;
+    break;
+  default:
+    CurrentChannel->ODTTriMap = (UINT8 *) C32RDdr3ODTTri2D;  // Most conservative
+  }
+
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  CurrentChannel->PhyRODTCSLow  = PhyRODTCSLow;
+  CurrentChannel->PhyRODTCSHigh = PhyRODTCSHigh;
+  CurrentChannel->PhyWODTCSLow  = PhyWODTCSLow;
+  CurrentChannel->PhyWODTCSHigh = PhyWODTCSHigh;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/C32/mauc32_3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/C32/mauc32_3.c
new file mode 100644
index 0000000000..d53c41c128
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/C32/mauc32_3.c
@@ -0,0 +1,356 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mauc32_3.c
+ *
+ * Platform specific settings for C32 DDR3 unbuffered dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+/* This file contains routine that add platform specific support AM3 */
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_C32_MAUC32_3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA C32UDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA C32UDdr3CKETri[] = {0x55, 0xAA};
+// Bit 0: M[B,A]0_ODT[0]
+// Bit 1: M[B,A]1_ODT[0]
+// Bit 2: M[B,A]0_ODT[1]
+// Bit 3: M[B,A]1_ODT[1]
+STATIC CONST UINT8 ROMDATA C32UDdr3ODTTri2D[] = {0x01, 0x04, 0x02, 0x08};
+// 3 dimms per channel
+// Dimm 0: BP_MEMODTx[0]
+// Dimm 1: BP_MEMODTx[3,1]
+// Dimm 2: BP_MEMODTx[2]
+STATIC CONST UINT8 ROMDATA C32UDdr3ODTTri3D[] = {0xFF, 0xFF, 0xFF, 0xFF};
+// Bit 0: M[B,A]0_CS_H/L[0]
+// Bit 1: M[B,A]0_CS_H/L[1]
+// Bit 2: M[B,A]0_CS_H/L[2]
+// Bit 3: M[B,A]0_CS_H/L[3]
+STATIC CONST UINT8 ROMDATA C32UDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for C32 DDR3 unbuffered dimms
+ *
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to C32 MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to C32 CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to C32 ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to C32 CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgUC32_3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST PSCFG_ENTRY PSCfg[] = {
+    {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323},
+    {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323},
+    {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323},
+    {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323}
+  };
+
+  STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg2DIMMsODT[] = {
+    {SR_DIMM0, 0x00000000, 0x00000000, 0x00000001, 0x00000000, 1},
+    {DR_DIMM0, 0x00000000, 0x00000000, 0x00000104, 0x00000000, 1},
+    {SR_DIMM1, 0x00000000,0x00000000,0x00020000, 0x00000000, 1},
+    {DR_DIMM1, 0x00000000,0x00000000,0x02080000, 0x00000000, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, 0x01010202,0x00000000,0x09030603, 0x00000000, 2},
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg2DIMMsWlODT[] = {
+    {SR_DIMM0,            {0x01, 0x00, 0x00, 0x00}, 1},
+    {DR_DIMM0,            {0x04, 0x00, 0x00, 0x00}, 1},
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}
+  };
+
+  STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg3DIMMsODT[] = {
+    {SR_DIMM2 + DR_DIMM2, 0x00000000, 0x00000000, 0x00000000, 0x00000404, 1},
+    //{SR_DIMM0 + DR_DIMM0, 0x00000000, 0x00000000, 0x00000101, 0x00000000, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, 0x00000404, 0x00000101, 0x00000405, 0x00000105, 2},
+    //{SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, 0x05050606, 0x00000303, 0x0D070607, 0x00000307, 3},
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg3DIMMsWlODT[] = {
+    {SR_DIMM2 + DR_DIMM2, {0x00, 0x00, 0x04, 0x00}, 1},
+    //{SR_DIMM0 + DR_DIMM0, {0x01, 0x02, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, {0x05, 0x00, 0x05, 0x00}, 2},
+    //{SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x07, 0x07, 0x07, 0x00}, 3},
+  };
+
+  UINT16 i;
+  UINT16 j;
+  UINT8  MaxDimmPerCH;
+  UINT8 Loads;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT32 PhyRODTCSLow;
+  UINT32 PhyRODTCSHigh;
+  UINT32 PhyWODTCSLow;
+  UINT32 PhyWODTCSHigh;
+  UINT8 PhyWLODT[4];
+  UINT8 PSCfgODTSize;
+  UINT8 PSCfgWlODTSize;
+  BOOLEAN SlowMode;
+  UINT8 DimmTpMatch;
+  CONST ADV_PSCFG_ODT_ENTRY *PSCfgODTPtr;
+  CONST ADV_R_PSCFG_WL_ODT_ENTRY *PSCfgWlODTPtr;
+  UINT8 *DimmsPerChPtr;
+
+  ASSERT (MemData != NULL);
+  ASSERT (CurrentChannel != NULL);
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  PhyRODTCSLow = 0;
+  PhyRODTCSHigh = 0;
+  PhyWODTCSLow = 0;
+  PhyWODTCSHigh = 0;
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_C32) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->RegDimmPresent) {
+    return AGESA_UNSUPPORTED;
+  }
+  // Prepare inputs
+
+  DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  Loads = CurrentChannel->Loads;
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) {
+    SlowMode = TRUE;   // 2T
+  } else {
+    SlowMode = FALSE;  // 1T
+  }
+
+  for (i = 0; i < GET_SIZE_OF (PSCfg); i++) {
+    if (Speed == PSCfg[i].Speed) {
+      if (Loads <= PSCfg[i].Loads) {
+        AddrTmgCTL = PSCfg[i].AddrTmg;
+        DctOdcCtl = PSCfg[i].Odc;
+        break;
+      }
+    }
+  }
+
+  ASSERT (i < GET_SIZE_OF (PSCfg));
+
+  if (MaxDimmPerCH == 3) {
+    PSCfgODTPtr = PSCfg3DIMMsODT;
+    PSCfgWlODTPtr = PSCfg3DIMMsWlODT;
+    PSCfgODTSize = sizeof (PSCfg3DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY);
+    PSCfgWlODTSize = sizeof (PSCfg3DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  } else {
+    PSCfgODTPtr = PSCfg2DIMMsODT;
+    PSCfgWlODTPtr = PSCfg2DIMMsWlODT;
+    PSCfgODTSize = sizeof (PSCfg2DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY);
+    PSCfgWlODTSize = sizeof (PSCfg2DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  }
+
+  // Programmable ODT
+  for (i = 0; i  < PSCfgODTSize; i++, PSCfgODTPtr++) {
+    if (Dimms != PSCfgODTPtr->Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgODTPtr->DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgODTPtr->Dimms) {
+      PhyRODTCSLow = PSCfgODTPtr->PhyRODTCSLow;
+      PhyRODTCSHigh = PSCfgODTPtr->PhyRODTCSHigh;
+      PhyWODTCSLow = PSCfgODTPtr->PhyWODTCSLow;
+      PhyWODTCSHigh = PSCfgODTPtr->PhyWODTCSHigh;
+      break;
+    }
+  }
+
+  // WL ODT
+  for (i = 0; i  < PSCfgWlODTSize; i++, PSCfgWlODTPtr++) {
+    if (Dimms != PSCfgWlODTPtr->Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgWlODTPtr->DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgWlODTPtr->Dimms) {
+      PhyWLODT[0] = PSCfgWlODTPtr->PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgWlODTPtr->PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgWlODTPtr->PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgWlODTPtr->PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  //
+  // Overrides and/or exceptions
+  //
+  if (Dimms == 1) {
+    if (Loads >= 16) {
+      if (Speed == DDR800_FREQUENCY) {
+        AddrTmgCTL = 0x003B0000;
+      } else if (Speed == DDR1066_FREQUENCY) {
+        AddrTmgCTL = 0x00380000;
+      } else if (Speed == DDR1333_FREQUENCY) {
+        AddrTmgCTL = 0x00360000;
+      } else {
+        AddrTmgCTL = 0x00340000;
+        SlowMode = TRUE;
+      }
+    } else {
+      AddrTmgCTL = 0;
+    }
+    DctOdcCtl = 0x20113222;
+  }
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) C32UDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) C32UDdr3CKETri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) C32UDdr3CSTri;
+
+  switch (MaxDimmPerCH) {
+  case 3:
+    CurrentChannel->ODTTriMap = (UINT8 *) C32UDdr3ODTTri3D;
+    break;
+  default:
+    CurrentChannel->ODTTriMap = (UINT8 *) C32UDdr3ODTTri2D;  // Most conservative
+  }
+
+  CurrentChannel->DctEccDqsLike = 0x0403;
+  CurrentChannel->DctEccDqsScale = 0x70;
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  CurrentChannel->PhyRODTCSLow  = PhyRODTCSLow;
+  CurrentChannel->PhyRODTCSHigh = PhyRODTCSHigh;
+  CurrentChannel->PhyWODTCSLow  = PhyWODTCSLow;
+  CurrentChannel->PhyWODTCSHigh = PhyWODTCSHigh;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DA/masda2.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DA/masda2.c
new file mode 100644
index 0000000000..c1b6c3b914
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DA/masda2.c
@@ -0,0 +1,206 @@
+/* $NoKeywords:$ */
+/*
+ * @file
+ *
+ * masda2.c
+ *
+ * Platform specific settings for DA DDR2 SO-dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support S1g3 */
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_DA_MASDA2_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA DASDdr2CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA DASDdr2CKETri[] = {0x55, 0xAA};
+// Bit 0: M[B,A]0_ODT[0]
+// Bit 1: M[B,A]1_ODT[0]
+// Bit 2: M[B,A]0_ODT[1]
+// Bit 3: M[B,A]1_ODT[1]
+STATIC CONST UINT8 ROMDATA DASDdr2ODTTri[] = {0x01, 0x04, 0x02, 0x08};
+// Bit 0: M[B,A]0_CS_H/L[0]
+// Bit 1: M[B,A]0_CS_H/L[1]
+// Bit 2: M[B,A]0_CS_H/L[2]
+// Bit 3: M[B,A]0_CS_H/L[3]
+STATIC CONST UINT8 ROMDATA DASDdr2CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for DA DDR2 SO-dimms
+ *
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to RB MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to RB CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to RB ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to RB CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgSDA2 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST PSCFG_ENTRY PSCfg[] = {
+    {DDR400_FREQUENCY, 0xFF, 0x002F2F2F, 0x10111222},
+    {DDR533_FREQUENCY, 0xFF, 0x002F2F2F, 0x10111222},
+    {DDR667_FREQUENCY, 0xFF, 0x002A2A2A, 0x10111222},
+    {DDR800_FREQUENCY, 0xFF, 0x002A2A2A, 0x10111222},
+  };
+
+  UINT16 i;
+  UINT8 Loads;
+  UINT8 Ranks;
+  UINT16 Speed;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  BOOLEAN SlowMode;
+
+  ASSERT (MemData != 0);
+  ASSERT (CurrentChannel != 0);
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR2_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  // Prepare inputs
+  Loads = CurrentChannel->Loads;
+  Ranks = CurrentChannel->Ranks;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+  SlowMode = FALSE;  // 1T
+
+  for (i = 0; i < GET_SIZE_OF (PSCfg); i++) {
+    if (Speed == PSCfg[i].Speed) {
+      if (Loads <= PSCfg[i].Loads) {
+        AddrTmgCTL = PSCfg[i].AddrTmg;
+        DctOdcCtl = PSCfg[i].Odc;
+        break;
+      }
+    }
+  }
+  ASSERT (i < GET_SIZE_OF (PSCfg));
+
+  //
+  // Overrides and/or exceptions
+  //
+  if (Loads == 16) {
+    if ((Speed == DDR533_FREQUENCY) && (Ranks == 2)) {
+      AddrTmgCTL = 0x002C2C2C;
+    } else if ((Speed == DDR667_FREQUENCY) && (Ranks == 1)) {
+      AddrTmgCTL = 0x00272727;
+    } else if ((Speed == DDR667_FREQUENCY) && (Ranks == 2)) {
+      AddrTmgCTL = 0x00002828;
+      SlowMode = TRUE;   // 2T
+    } else if ((Speed == DDR800_FREQUENCY) && (Ranks == 1)) {
+      AddrTmgCTL = 0x00292929;
+    } else if ((Speed == DDR800_FREQUENCY) && (Ranks == 2)) {
+      AddrTmgCTL = 0x00002F2F;
+      SlowMode = TRUE;   // 2T
+    }
+  }
+  CurrentChannel->MemClkDisMap = (UINT8 *) DASDdr2CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) DASDdr2CKETri;
+  CurrentChannel->ODTTriMap = (UINT8 *) DASDdr2ODTTri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) DASDdr2CSTri;
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DA/masda3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DA/masda3.c
new file mode 100644
index 0000000000..10ff5c8e4c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DA/masda3.c
@@ -0,0 +1,260 @@
+/* $NoKeywords:$ */
+/*
+ * @file
+ *
+ * masda3.c
+ *
+ * Platform specific settings for DA DDR3 SO-dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support S1g4 */
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "ma.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_DA_MASDA3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA DASDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA DASDdr3CKETri[] = {0x55, 0xAA};
+// Bit 0: M[B,A]0_ODT[0]
+// Bit 1: M[B,A]1_ODT[0]
+// Bit 2: M[B,A]0_ODT[1]
+// Bit 3: M[B,A]1_ODT[1]
+STATIC CONST UINT8 ROMDATA DASDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08};
+// Bit 0: M[B,A]0_CS_H/L[0]
+// Bit 1: M[B,A]0_CS_H/L[1]
+// Bit 2: M[B,A]0_CS_H/L[2]
+// Bit 3: M[B,A]0_CS_H/L[3]
+STATIC CONST UINT8 ROMDATA DASDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for DA DDR3 SO-dimms
+ *
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to RB MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to RB CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to RB ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to RB CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgSDA3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST PSCFG_ENTRY PSCfg[] = {
+    {DDR800_FREQUENCY, 0xFF, 0x00000000, 0x00113222},
+    {DDR1066_FREQUENCY, 0xFF, 0x00000000, 0x10113222},
+    {DDR1333_FREQUENCY, 0xFF, 0x00000000, 0x20113222},
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = {
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}
+  };
+
+  UINT16 i;
+  UINT16 j;
+  UINT8 Loads;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT8 PhyWLODT[4];
+  BOOLEAN SlowMode;
+  UINT8  MaxDimmPerCH;
+  UINT8 *DimmsPerChPtr;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT8 DimmTpMatch;
+
+  ASSERT (MemData != 0);
+  ASSERT (CurrentChannel != 0);
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+  SlowMode = FALSE;  // 1T
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+  // Prepare inputs
+  Loads = CurrentChannel->Loads;
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  for (i = 0; i < GET_SIZE_OF (PSCfg); i++) {
+    if (Speed == PSCfg[i].Speed) {
+      if (Loads <= PSCfg[i].Loads) {
+        AddrTmgCTL = PSCfg[i].AddrTmg;
+        DctOdcCtl = PSCfg[i].Odc;
+        break;
+      }
+    }
+  }
+
+  // WL ODT
+  for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) {
+    if (Dimms != PSCfgDIMMWlODT[i].Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) {
+      PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  //
+  // Overrides and/or exceptions
+  //
+  if (MaxDimmPerCH == 2) {
+    if (Dimms == 2) {
+      DctOdcCtl = 0x20223323;
+      SlowMode = TRUE;
+      if (Speed == DDR800_FREQUENCY) {
+        AddrTmgCTL = 0x00000039;
+      } else if (Speed == DDR1066_FREQUENCY) {
+        AddrTmgCTL = 0x00000037;
+      }
+    } else {
+      DctOdcCtl = 0x20113222;
+    }
+  } else {
+    if (CurrentChannel->DimmSRPresent != 0) {
+      PhyWLODT[0] = 1;
+    } else if (CurrentChannel->DimmDrPresent != 0) {
+      PhyWLODT[0] = 4;
+    }
+  }
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) DASDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) DASDdr3CKETri;
+  CurrentChannel->ODTTriMap = (UINT8 *) DASDdr3ODTTri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) DASDdr3CSTri;
+
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DA/mauda3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DA/mauda3.c
new file mode 100644
index 0000000000..74980558bf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DA/mauda3.c
@@ -0,0 +1,259 @@
+/* $NoKeywords:$ */
+/*
+ * @file
+ *
+ * mauda3.c
+ *
+ * Platform specific settings for DA DDR3 unbuffered dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support AM3 */
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_DA_MAUDA3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA DAUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA DAUDdr3CKETri[] = {0x55, 0xAA};
+// Bit 0: M[B,A]0_ODT[0]
+// Bit 1: M[B,A]1_ODT[0]
+// Bit 2: M[B,A]0_ODT[1]
+// Bit 3: M[B,A]1_ODT[1]
+STATIC CONST UINT8 ROMDATA DAUDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08};
+// Bit 0: M[B,A]0_CS_H/L[0]
+// Bit 1: M[B,A]0_CS_H/L[1]
+// Bit 2: M[B,A]0_CS_H/L[2]
+// Bit 3: M[B,A]0_CS_H/L[3]
+STATIC CONST UINT8 ROMDATA DAUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for DA DDR3 Unbuffered dimms
+ *
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to RB MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to RB CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to RB ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to RB CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgUDA3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST PSCFG_ENTRY PSCfg1Dimm[] = {
+    {DDR800_FREQUENCY, 0x10, 0x003B0000, 0x20113222},
+    {DDR1066_FREQUENCY, 0x10, 0x00380000, 0x20113222},
+    {DDR1333_FREQUENCY, 0x10, 0x00360000, 0x20113222},
+    {DDR1600_FREQUENCY, 0x10, 0x00340000, 0x20113222}
+  };
+  STATIC CONST PSCFG_ENTRY PSCfg2Dimm[] = {
+    {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323},
+    {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323},
+    {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323},
+    {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323}
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = {
+    {SR_DIMM0,            {0x01, 0x00, 0x00, 0x00}, 1},
+    {DR_DIMM0,            {0x04, 0x00, 0x00, 0x00}, 1},
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}
+  };
+
+  UINT16 i;
+  UINT16 j;
+  UINT8 Loads;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT8 PhyWLODT[4];
+  BOOLEAN SlowMode;
+  UINT8 DimmTpMatch;
+
+  ASSERT (MemData != 0);
+  ASSERT (CurrentChannel != 0);
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if ((CurrentChannel->RegDimmPresent != 0) || (CurrentChannel->SODimmPresent != 0)) {
+    return AGESA_UNSUPPORTED;
+  }
+  // Prepare inputs
+  Loads = CurrentChannel->Loads;
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) {
+    SlowMode = TRUE;   // 2T
+  } else if ((Speed == DDR1600_FREQUENCY) && (Dimms == 1) && (Loads >= 16)) {
+    SlowMode = TRUE;   // 2T
+  } else {
+    SlowMode = FALSE;  // 1T
+  }
+
+  if (Dimms == 1) {
+    for (i = 0; i < GET_SIZE_OF (PSCfg1Dimm); i++) {
+      if (Speed == PSCfg1Dimm[i].Speed) {
+        if (Loads >= PSCfg1Dimm[i].Loads) {
+          AddrTmgCTL = PSCfg1Dimm[i].AddrTmg;
+          DctOdcCtl = PSCfg1Dimm[i].Odc;
+        } else {
+          DctOdcCtl = 0x20113222;
+        }
+        break;
+      }
+    }
+    ASSERT (i < GET_SIZE_OF (PSCfg1Dimm));
+  } else {
+    for (i = 0; i < GET_SIZE_OF (PSCfg2Dimm); i++) {
+      if (Speed == PSCfg2Dimm[i].Speed) {
+        if (Loads <= PSCfg2Dimm[i].Loads) {
+          AddrTmgCTL = PSCfg2Dimm[i].AddrTmg;
+          DctOdcCtl = PSCfg2Dimm[i].Odc;
+          break;
+        }
+      }
+    }
+    ASSERT (i < GET_SIZE_OF (PSCfg2Dimm));
+  }
+
+  // WL ODT
+  for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) {
+    if (Dimms != PSCfgDIMMWlODT[i].Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) {
+      PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) DAUDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) DAUDdr3CKETri;
+  CurrentChannel->ODTTriMap = (UINT8 *) DAUDdr3ODTTri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) DAUDdr3CSTri;
+
+  CurrentChannel->DctEccDqsLike = 0x0403;
+  CurrentChannel->DctEccDqsScale = 0x70;
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DR/mardr2.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DR/mardr2.c
new file mode 100644
index 0000000000..5f8ad1a6c2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DR/mardr2.c
@@ -0,0 +1,273 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mardr2.c
+ *
+ * Platform specific settings for DR DDR2 L1 system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "ma.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_DR_MARDR2_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA DrRDdr2CLKDis[] = {0x00, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0x00};
+
+// Chip select 0, 1, 4, 5 maps to M[B,A]_CKE[0]
+// Chip select 2, 3, 6, 7 maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA DrRDdr2CKETri[] = {0x33, 0xCC};
+
+// 2 dimms per channel
+// Dimm 0: BP_MEMODTx[2,0]
+// Dimm 1: BP_MEMODTx[3,1]
+STATIC CONST UINT8 ROMDATA DrRDdr2ODTTri2D[] = {0x03, 0x0C, 0x32, 0xC8};
+// 3 dimms per channel
+// Dimm 0: BP_MEMODTx[0]
+// Dimm 1: BP_MEMODTx[3,1]
+// Dimm 2: BP_MEMODTx[2]
+STATIC CONST UINT8 ROMDATA DrRDdr2ODTTri3D[] = {0x03, 0x0C, 0x30, 0xC8};
+// 4 dimms per channel
+// Dimm 0: BP_MEMODTx[0]
+// Dimm 1: BP_MEMODTx[1]
+// Dimm 2: BP_MEMODTx[2]
+// Dimm 3: BP_MEMODTx[3]
+STATIC CONST UINT8 ROMDATA DrRDdr2ODTTri4D[] = {0x03, 0x0C, 0x30, 0xC0};
+
+// BIOS must not tri-state chip select pin corresponding to the second chip
+// select of a single rank registered dimm
+STATIC CONST UINT8 ROMDATA DrRDdr2CSTri[] = {0x01, 0x03, 0x04, 0x0C, 0x10, 0x30, 0x40, 0xC0};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for DR DDR2 L1 system
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to RB MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to RB CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to RB ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to RB CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgRDr2 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST ADV_PSCFG_ENTRY PSCfg4D[] = {
+    {ANY_, ANY_, 0x00000000, 0x00111222, 1},
+    {ANY_, ANY_, 0x00370000, 0x00111222, 2}
+  };
+
+  STATIC CONST ADV_PSCFG_ENTRY PSCfg8D[] = {
+    {ANY_, ANY_, 0x00000000, 0x00111222, 1},
+    {ANY_, ANY_, 0x00370000, 0x00111222, 2},
+    {ANY_, ANY_, 0x002F0000, 0x00111222, ANY_}
+  };
+
+  CONST ADV_PSCFG_ENTRY *PSCfgPtr;
+  UINT16 i;
+  UINT8  MaxDimmPerCH;
+  UINT16 TabSize;
+  UINT8 Loads;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT16 QRPresent;
+  UINT16 DRx4Present;
+  BOOLEAN SlowMode;
+  UINT8 *DimmsPerChPtr;
+
+  ASSERT (MemData != 0);
+  ASSERT (CurrentChannel != 0);
+
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR2_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->RegDimmPresent != CurrentChannel->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  // Prepare inputs
+  Loads = CurrentChannel->Loads;
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+  DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+  QRPresent = CurrentChannel->DimmQrPresent;
+  DRx4Present = CurrentChannel->DimmDrPresent & CurrentChannel->Dimmx4Present;
+  if (QRPresent) {
+    Dimms = (Dimms + 1) / 2;
+  }
+
+  // Table look up
+  if (MaxDimmPerCH <= 2) {
+    PSCfgPtr = PSCfg4D;
+    TabSize = GET_SIZE_OF (PSCfg4D);
+  } else {
+    PSCfgPtr = PSCfg8D;
+    TabSize = GET_SIZE_OF (PSCfg8D);
+  }
+  DctOdcCtl = 0;
+  AddrTmgCTL = 0;
+  for (i = 0; i < TabSize; i++) {
+    if ((PSCfgPtr[i].Dimms == ANY_) || (PSCfgPtr[i].Dimms == Dimms)) {
+      if ((PSCfgPtr[i].Speed == ANY_) || (PSCfgPtr[i].Speed == Speed)) {
+        if ((PSCfgPtr[i].Loads == ANY_) || (PSCfgPtr[i].Loads >= Loads)) {
+          AddrTmgCTL = PSCfgPtr[i].AddrTmg;
+          DctOdcCtl = PSCfgPtr[i].Odc;
+          break;
+        }
+      }
+    }
+  }
+  ASSERT (i == TabSize);
+  SlowMode = FALSE;  // 1T
+
+  //
+  // Overrides and/or exceptions
+  //
+
+  if (QRPresent == 0x55) {
+    // QR for 4DIMM case only
+    AddrTmgCTL = 0x002F0000;
+    if (Speed >= DDR667_FREQUENCY) {
+      DctOdcCtl = 0x00331222;
+    }
+  }
+
+  if (Speed >= DDR667_FREQUENCY) {
+    if ((QRPresent != 0) || (DRx4Present != 0)) {
+      AddrTmgCTL |= 0x00002F00;
+    }
+    if (Dimms >= 3) {
+      AddrTmgCTL |= 0x0000002F;
+    }
+    if (Dimms == 3 || Dimms == 4) {
+      DctOdcCtl = 0x00331222;
+    }
+  }
+
+  // Adjust Processor ODT
+  if (Dimms == 1) {
+    DctOdcCtl |= 0x20000000;        // 75ohms
+  } else {
+    DctOdcCtl |= 0x10000000;        // 150ohms
+  }
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) DrRDdr2CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) DrRDdr2CKETri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) DrRDdr2CSTri;
+
+  switch (MaxDimmPerCH) {
+  case 3:
+    CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr2ODTTri3D;
+    break;
+  case 4:
+    CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr2ODTTri4D;
+    break;
+  default:
+    CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr2ODTTri2D;
+  }
+
+  CurrentChannel->DctEccDqsLike = 0x0504;
+  CurrentChannel->DctEccDqsScale = 0;
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DR/mardr3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DR/mardr3.c
new file mode 100644
index 0000000000..9c7e82c58e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DR/mardr3.c
@@ -0,0 +1,428 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mardr3.c
+ *
+ * Memory Controller, registered dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support AM3 */
+
+
+#include "AGESA.h"
+#include "ma.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_DR_MARDR3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA DrRDdr3CLKDis[] = {0x00, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0x00};
+
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA DrRDdr3CKETri[] = {0x55, 0xAA};
+
+// 2 dimms per channel
+// Dimm 0: BP_MEMODTx[2,0]
+// Dimm 1: BP_MEMODTx[3,1]
+STATIC CONST UINT8 ROMDATA DrRDdr3ODTTri2D[] = {0x03, 0x0C, 0x32, 0xC8};
+// 3 dimms per channel
+// Dimm 0: BP_MEMODTx[0]
+// Dimm 1: BP_MEMODTx[3,1]
+// Dimm 2: BP_MEMODTx[2]
+STATIC CONST UINT8 ROMDATA DrRDdr3ODTTri3D[] = {0x03, 0x0C, 0x30, 0xC8};
+// 4 dimms per channel
+// Dimm 0: BP_MEMODTx[0]
+// Dimm 1: BP_MEMODTx[1]
+// Dimm 2: BP_MEMODTx[2]
+// Dimm 3: BP_MEMODTx[3]
+STATIC CONST UINT8 ROMDATA DrRDdr3ODTTri4D[] = {0x03, 0x0C, 0x30, 0xC0};
+
+// BIOS must not tri-state chip select pin corresponding to the second chip
+// select of a single rank registered dimm
+STATIC CONST UINT8 ROMDATA DrRDdr3CSTri[] = {0x01, 0x03, 0x04, 0x0C, 0x10, 0x30, 0x40, 0xC0};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for DR DDR3 L1 system
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to RB MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to RB CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to RB ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to RB CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgRDr3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST ADV_R_PSCFG_ENTRY PSCfg2DIMMs[] = {
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x00000000, 0x0000, 1},
+     {DDR800_FREQUENCY, QR_DIMM0 + QR_DIMM1, \
+       0x00000000, 0x0040, 1},
+     {DDR800_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \
+       0x00000000, 0x4004, 2},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x003C3C3C, 0x0000,1},
+     {DDR1066_FREQUENCY, QR_DIMM0 + QR_DIMM1, \
+       0x003C3C3C, 0x0040, 1},
+     {DDR1066_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \
+       0x003A3C3A, 0x4004, 2},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x003A3A3A, 0x0000, 1},
+     {DDR1333_FREQUENCY, QR_DIMM0 + QR_DIMM1, \
+       0x003A3A3A, 0x0040, 1},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x00383A38, 0x4040, 2},
+     {DDR1333_FREQUENCY, QR_DIMM0 + QR_DIMM1, \
+       0x00383A38, 0x4004, 2},
+     {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x00373937, 0x0000, 1},
+     {DDR1600_FREQUENCY, QR_DIMM0 + QR_DIMM1, \
+       0x00373937, 0x0040, 1},
+     {DDR1600_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \
+       0x00353935, 0x4004, 2}
+  };
+
+  STATIC CONST ADV_R_PSCFG_ENTRY PSCfg3DIMMs[] = {
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x0000, 1},
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x4040, 2},
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00380038, 0x4004, 3},
+     {DDR800_FREQUENCY, QR_DIMM1, \
+       0x00000000, 0x0040, 1},
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x4004, 2},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x003C3C3C, 0x0000, 1},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x003A3C3A, 0x4040, 2},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00373C37, 0x4040, 3},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00373C37, 0x4004, 3},
+     {DDR1066_FREQUENCY, QR_DIMM1, \
+       0x003C3C3C, 0x0040, 1},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x003A3C3A, 0x4004, 2},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x003A3A3A, 0x0000, 1},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00383A38, 0x4040, 2},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00343A34, 0x4004, 3},
+     {DDR1333_FREQUENCY, QR_DIMM1, \
+       0x003A3A3A, 0x0040, 1},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00383A38, 0x4004, 2},
+     {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00393939, 0x0000, 1},
+     {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00363936, 0x4040, 2},
+     {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00303930, 0x4004, 3},
+     {DDR1600_FREQUENCY, QR_DIMM1, \
+       0x00393939, 0x0040, 1},
+     {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00363936, 0x4004, 2}
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg2DIMMsWlODT[] = {
+    {SR_DIMM0,            {0x01, 0x00, 0x00, 0x00}, 1},
+    {DR_DIMM0,            {0x04, 0x00, 0x00, 0x00}, 1},
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {QR_DIMM1,            {0x00, 0x0A, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2},
+    {SR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {QR_DIMM0 + SR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2},
+    {QR_DIMM0 + DR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2},
+    {QR_DIMM0 + QR_DIMM1, {0x0B, 0x07, 0x0E, 0x0D}, 2}
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg3DIMMsWlODT[] = {
+    {SR_DIMM2 + DR_DIMM2, {0x00, 0x00, 0x04, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0, {0x01, 0x02, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, {0x05, 0x00, 0x05, 0x00}, 2},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x07, 0x07, 0x07, 0x00}, 3},
+    {QR_DIMM1, {0x00, 0x0A, 0x00, 0x0A}, 1},
+    {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x00, 0x06, 0x0E, 0x0C}, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x0F, 0x07, 0x0F, 0x0D}, 3}
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg4DIMMsWlODT[] = {
+    {ANY_DIMM3, {0x00, 0x00, 0x00, 0x08}, 1},
+    {ANY_DIMM2 + ANY_DIMM3, {0x00, 0x00, 0x0C, 0x0C}, 2},
+    {ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x00, 0x0E, 0x0E, 0x0E}, 3},
+    {ANY_DIMM0 + ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x0F, 0x0F, 0x0F, 0x0F}, 4}
+  };
+  UINT16 i;
+  UINT16 j;
+  UINT8  MaxDimmPerCH;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT8 DimmTpMatch;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT16 RC2RC8;
+  BOOLEAN SlowMode;
+  UINT8 PSCfgSize;
+  UINT8 PSCfgWlODTSize;
+  UINT8 PhyWLODT[4];
+  CONST ADV_R_PSCFG_ENTRY *PSCfgPtr;
+  CONST ADV_R_PSCFG_WL_ODT_ENTRY *PSCfgWlODTPtr;
+  UINT8 *DimmsPerChPtr;
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  RC2RC8 = 0;
+  SlowMode = FALSE;
+  ASSERT (MemData != NULL);
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->RegDimmPresent != CurrentChannel->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+  // Prepare inputs
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+
+  DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  if (MaxDimmPerCH == 4) {
+    PSCfgPtr = NULL;
+    PSCfgSize = NULL;
+    PSCfgWlODTPtr = PSCfg4DIMMsWlODT;
+    PSCfgWlODTSize = sizeof (PSCfg4DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  } else if (MaxDimmPerCH == 3) {
+    PSCfgPtr = PSCfg3DIMMs;
+    PSCfgSize = sizeof (PSCfg3DIMMs) / sizeof (ADV_R_PSCFG_ENTRY);
+    PSCfgWlODTPtr = PSCfg3DIMMsWlODT;
+    PSCfgWlODTSize = sizeof (PSCfg3DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  } else {
+    PSCfgPtr = PSCfg2DIMMs;
+    PSCfgSize = sizeof (PSCfg2DIMMs) / sizeof (ADV_R_PSCFG_ENTRY);
+    PSCfgWlODTPtr = PSCfg2DIMMsWlODT;
+    PSCfgWlODTSize = sizeof (PSCfg2DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  }
+
+  // AddrTmgCTL and DctOdcCtl
+  if (MaxDimmPerCH != 4) {
+    for (i = 0; i < PSCfgSize; i++, PSCfgPtr++) {
+      if ((Speed != PSCfgPtr->Speed) || (Dimms != PSCfgPtr->Dimms)) {
+        continue;
+      }
+      DimmTpMatch = 0;
+      _DIMMRankType = DIMMRankType & PSCfgPtr->DIMMRankType;
+      for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+        if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+          DimmTpMatch++;
+        }
+      }
+      if (DimmTpMatch == PSCfgPtr->Dimms) {
+        AddrTmgCTL = PSCfgPtr->AddrTmg;
+        DctOdcCtl = 0x00223222;
+        RC2RC8 = PSCfgPtr->RC2RC8;
+        break;
+      }
+    }
+  }
+
+  //
+  // Overrides and/or exceptions
+  //
+  DimmTpMatch = 0;
+  for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+    if ((DIMMRankType & (UINT16) 0x03 << (j << 2)) != 0) {
+      DimmTpMatch++;
+    }
+  }
+  if (MaxDimmPerCH == 4) {
+    if (DimmTpMatch > 0) {
+      DctOdcCtl = 0x00223222;
+      if ((Speed == DDR800_FREQUENCY) && (DimmTpMatch == 1)) {
+        DctOdcCtl = 0x00113222;
+      }
+    }
+    if (DimmTpMatch >= 3) {
+      AddrTmgCTL |= 0x002F0000;
+    }
+    if (DimmTpMatch >= 2) {
+      RC2RC8 = 0x4040;
+    }
+  } else {
+    if ((Dimms == 1) && (DimmTpMatch == 1)) {
+      DctOdcCtl = 0x00113222;
+    }
+  }
+
+  //RC2 and RC8
+  for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+    // CtrlWrd02(s) will contain the info. of SPD byte 63 after MemTDIMMPresence3 execution.
+    if (CurrentChannel->CtrlWrd02[j] > 0) {
+      if (CurrentChannel->CtrlWrd02[j] == 1) {
+        // Store real RC2 and RC8 value (High byte) into CtrlWrd02(s) and CtrlWrd08(s).
+        CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 12) & 0x000F;
+        CurrentChannel->CtrlWrd08[j] = (UINT8) (RC2RC8 >> 8) & 0x000F;
+      } else {
+        // Store real RC2 and RC8 value (low byte) into CtrlWrd02(s) and CtrlWrd08(s).
+        CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 4) & 0x000F;
+        CurrentChannel->CtrlWrd08[j] = (UINT8) RC2RC8 & 0x000F;
+      }
+    }
+  }
+
+
+  //WLODT
+  for (i = 0; i  < PSCfgWlODTSize; i++, PSCfgWlODTPtr++) {
+    if (Dimms != PSCfgWlODTPtr->Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgWlODTPtr->DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgWlODTPtr->Dimms) {
+      PhyWLODT[0] = PSCfgWlODTPtr->PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgWlODTPtr->PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgWlODTPtr->PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgWlODTPtr->PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  // Set ProcODT
+  DctOdcCtl |= 0x20000000;
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) DrRDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) DrRDdr3CKETri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) DrRDdr3CSTri;
+
+  switch (MaxDimmPerCH) {
+  case 3:
+    CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr3ODTTri3D;
+    break;
+  case 4:
+    CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr3ODTTri4D;
+    break;
+  default:
+    CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr3ODTTri2D;
+  }
+
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DR/maudr3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DR/maudr3.c
new file mode 100644
index 0000000000..203d64c85d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/DR/maudr3.c
@@ -0,0 +1,259 @@
+/* $NoKeywords:$ */
+/*
+ * @file
+ *
+ * maudr3.c
+ *
+ * Platform specific settings for DR DDR3 unbuffered dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support AM3 */
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_DR_MAUDR3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA DrUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA DrUDdr3CKETri[] = {0x55, 0xAA};
+// Bit 0: M[B,A]0_ODT[0]
+// Bit 1: M[B,A]1_ODT[0]
+// Bit 2: M[B,A]0_ODT[1]
+// Bit 3: M[B,A]1_ODT[1]
+STATIC CONST UINT8 ROMDATA DrUDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08};
+// Bit 0: M[B,A]0_CS_H/L[0]
+// Bit 1: M[B,A]0_CS_H/L[1]
+// Bit 2: M[B,A]0_CS_H/L[2]
+// Bit 3: M[B,A]0_CS_H/L[3]
+STATIC CONST UINT8 ROMDATA DrUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for DR DDR3 Unbuffered dimms
+ *
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to RB MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to RB CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to RB ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to RB CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgUDr3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST PSCFG_ENTRY PSCfg1Dimm[] = {
+    {DDR800_FREQUENCY, 0x10, 0x003B0000, 0x20113222},
+    {DDR1066_FREQUENCY, 0x10, 0x00380000, 0x20113222},
+    {DDR1333_FREQUENCY, 0x10, 0x00360000, 0x20113222},
+    {DDR1600_FREQUENCY, 0x10, 0x00340000, 0x20113222}
+  };
+  STATIC CONST PSCFG_ENTRY PSCfg2Dimm[] = {
+    {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323},
+    {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323},
+    {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323},
+    {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323}
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = {
+    {SR_DIMM0,            {0x01, 0x00, 0x00, 0x00}, 1},
+    {DR_DIMM0,            {0x04, 0x00, 0x00, 0x00}, 1},
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}
+  };
+
+  UINT16 i;
+  UINT16 j;
+  UINT8 Loads;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT8 PhyWLODT[4];
+  BOOLEAN SlowMode;
+  UINT8 DimmTpMatch;
+
+  ASSERT (MemData != 0);
+  ASSERT (CurrentChannel != 0);
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->RegDimmPresent != 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  // Prepare inputs
+  Loads = CurrentChannel->Loads;
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) {
+    SlowMode = TRUE;   // 2T
+  } else if ((Speed == DDR1600_FREQUENCY) && (Dimms == 1) && (Loads >= 16)) {
+    SlowMode = TRUE;   // 2T
+  } else {
+    SlowMode = FALSE;  // 1T
+  }
+
+  if (Dimms == 1) {
+    for (i = 0; i < GET_SIZE_OF (PSCfg1Dimm); i++) {
+      if (Speed == PSCfg1Dimm[i].Speed) {
+        if (Loads >= PSCfg1Dimm[i].Loads) {
+          AddrTmgCTL = PSCfg1Dimm[i].AddrTmg;
+          DctOdcCtl = PSCfg1Dimm[i].Odc;
+        } else {
+          DctOdcCtl = 0x20113222;
+        }
+        break;
+      }
+    }
+    ASSERT (i < GET_SIZE_OF (PSCfg1Dimm));
+  } else {
+    for (i = 0; i < GET_SIZE_OF (PSCfg2Dimm); i++) {
+      if (Speed == PSCfg2Dimm[i].Speed) {
+        if (Loads <= PSCfg2Dimm[i].Loads) {
+          AddrTmgCTL = PSCfg2Dimm[i].AddrTmg;
+          DctOdcCtl = PSCfg2Dimm[i].Odc;
+          break;
+        }
+      }
+    }
+    ASSERT (i < GET_SIZE_OF (PSCfg2Dimm));
+  }
+
+  // WL ODT
+  for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) {
+    if (Dimms != PSCfgDIMMWlODT[i].Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) {
+      PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) DrUDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) DrUDdr3CKETri;
+  CurrentChannel->ODTTriMap = (UINT8 *) DrUDdr3ODTTri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) DrUDdr3CSTri;
+
+  CurrentChannel->DctEccDqsLike = 0x0403;
+  CurrentChannel->DctEccDqsScale = 0x70;
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/HY/marhy3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/HY/marhy3.c
new file mode 100644
index 0000000000..3f37034a6e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/HY/marhy3.c
@@ -0,0 +1,577 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * marhy3.c
+ *
+ * Memory Controller, registered dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support AM3 */
+
+
+#include "AGESA.h"
+#include "ma.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_HY_MARHY3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA HyRDdr3CLKDis[] = {0xFF, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00};
+
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA HyRDdr3CKETri[] = {0x55, 0xAA};
+
+// 2 dimms per channel
+// Dimm 0: BP_MEMODTx[2,0]
+// Dimm 1: BP_MEMODTx[3,1]
+STATIC CONST UINT8 ROMDATA HyRDdr3ODTTri2D[] = {0x03, 0x0C, 0x32, 0xC8};
+// 3 dimms per channel
+// Dimm 0: BP_MEMODTx[0]
+// Dimm 1: BP_MEMODTx[3,1]
+// Dimm 2: BP_MEMODTx[2]
+STATIC CONST UINT8 ROMDATA HyRDdr3ODTTri3D[] = {0x03, 0x0C, 0x30, 0xC8};
+// 4 dimms per channel
+// Dimm 0: BP_MEMODTx[0]
+// Dimm 1: BP_MEMODTx[1]
+// Dimm 2: BP_MEMODTx[2]
+// Dimm 3: BP_MEMODTx[3]
+STATIC CONST UINT8 ROMDATA HyRDdr3ODTTri4D[] = {0x03, 0x0C, 0x30, 0xC0};
+
+// BIOS must not tri-state chip select pin corresponding to the second chip
+// select of a single rank registered dimm
+STATIC CONST UINT8 ROMDATA HyRDdr3CSTri[] = {0x01, 0x03, 0x04, 0x0C, 0x10, 0x30, 0x40, 0xC0};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for HY DDR3 L1 system
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID        Socket number
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to HY MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to HY CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to HY ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to HY CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgRHy3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  //
+  // Address Timings and Drive Strengths for 1 DIMM per channel or 2 Dimms per Channel
+  //
+  // Code searches table for matching speed, then matches the current dimm
+  // population and # of dimms to current config and programs the Addr Timing and RC2/RC2
+  //
+  // Frequency, Dimm Config ,
+  // Address Timing Value(F2x[1, 0]9C_x04), RC2/RC8 Value, # Dimms to match
+  //
+  STATIC CONST ADV_R_PSCFG_ENTRY PSCfg2DIMMs[] = {
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x00000000, 0x0000, 1},
+     {DDR800_FREQUENCY, QR_DIMM0 + QR_DIMM1, \
+       0x00000000, 0x0040, 1},
+     {DDR800_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \
+       0x00000000, 0x4004, 2},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x003C3C3C, 0x0000,1},
+     {DDR1066_FREQUENCY, QR_DIMM0 + QR_DIMM1, \
+       0x003C3C3C, 0x0040, 1},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x003A3C3A, 0x4004, 2},
+     {DDR1066_FREQUENCY, QR_DIMM0 + ANY_DIMM1, \
+       0x003A3C3A, 0x4004, 2},
+     {DDR1066_FREQUENCY, ANY_DIMM0 + QR_DIMM1, \
+       0x003A3C3A, 0x4004, 2},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x003A3A3A, 0x0000, 1},
+     {DDR1333_FREQUENCY, QR_DIMM0 + QR_DIMM1, \
+       0x003A3A3A, 0x0040, 1},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x00383A38, 0x4040, 2},
+     {DDR1333_FREQUENCY, QR_DIMM0 + ANY_DIMM1, \
+       0x00383A38, 0x4004, 2},
+     {DDR1333_FREQUENCY, ANY_DIMM0 + QR_DIMM1, \
+       0x00383A38, 0x4004, 2},
+     {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+       0x00373937, 0x0000, 1},
+     {DDR1600_FREQUENCY, QR_DIMM0 + QR_DIMM1, \
+       0x00373937, 0x0040, 1},
+     {DDR1600_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \
+       0x00353935, 0x4004, 2}
+  };
+  //
+  // Address Timings and Drive Strengths for 3 DIMMs per channel
+  //
+  // Code searches table for matching speed, then matches the current dimm
+  // population and # of dimms to current config and programs the Addr Timing and RC2/RC2
+  //
+  // Frequency, Dimm Config ,
+  // Address Timing Value(F2x[1, 0]9C_x04), RC2/RC8 Value, # Dimms to match
+  //
+  STATIC CONST ADV_R_PSCFG_ENTRY PSCfg3DIMMs[] = {
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x0000, 1},
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x4040, 2},
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00380038, 0x4004, 3},
+     {DDR800_FREQUENCY, QR_DIMM1, \
+       0x00000000, 0x0040, 1},
+     {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00000000, 0x4004, 2},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x003C3C3C, 0x0000, 1},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x003A3C3A, 0x4040, 2},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00373C37, 0x4040, 3},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00373C37, 0x4004, 3},
+     {DDR1066_FREQUENCY, QR_DIMM1, \
+       0x003C3C3C, 0x0040, 1},
+     {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x003A3C3A, 0x4004, 2},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x003A3A3A, 0x0000, 1},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00383A38, 0x4040, 2},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00343A34, 0x4004, 3},
+     {DDR1333_FREQUENCY, QR_DIMM1, \
+       0x003A3A3A, 0x0040, 1},
+     {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00383A38, 0x4004, 2},
+     {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00393939, 0x0000, 1},
+     {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00363936, 0x4040, 2},
+     {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00303930, 0x4004, 3},
+     {DDR1600_FREQUENCY, QR_DIMM1, \
+       0x00393939, 0x0040, 1},
+     {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+       0x00363936, 0x4004, 2}
+  };
+  //
+  // DIMM ODT Pattern (1 or 2 DIMMs per channel)
+  //
+  // Dimm Config ,
+  // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match
+  //
+  STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg2DIMMsODT[] = {
+    {SR_DIMM0, \
+      0x00000000, 0x00000000, 0x00000001, 0x00000000, 1},
+    {DR_DIMM0, \
+      0x00000000, 0x00000000, 0x00000104, 0x00000000, 1},
+    {QR_DIMM0, \
+      0x00000000, 0x00000000, 0x00000505, 0x00000505, 1},
+    {SR_DIMM1, \
+      0x00000000, 0x00000000, 0x00020000, 0x00000000, 1},
+    {DR_DIMM1, \
+      0x00000000, 0x00000000, 0x02080000, 0x00000000, 1},
+    {QR_DIMM1, \
+      0x00000000, 0x00000000, 0x0A0A0000, 0x0A0A0000, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+      0x01010202, 0x00000000, 0x09030603, 0x00000000, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, \
+      0x01010A0A, 0x01010000, 0x01030E0B, 0x01090000, 2},
+    {QR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
+      0x05050202, 0x00000202, 0x0D070203, 0x00000206, 2},
+    {QR_DIMM0 + QR_DIMM1, \
+      0x05050A0A, 0x05050A0A, 0x05070A0B, 0x050D0A0E, 2}
+  };
+  // DIMM ODT Pattern (3 DIMMs per channel)
+  //
+  // Dimm Config ,
+  // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match
+  //
+  STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg3DIMMsODT[] = {
+    {SR_DIMM2 + DR_DIMM2, \
+      0x00000000, 0x00000000, 0x00000000, 0x00000404, 1},
+    {SR_DIMM0 + DR_DIMM0, \
+      0x00000000, 0x00000000, 0x00000101, 0x00000000, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, \
+      0x00000404, 0x00000101, 0x00000405, 0x00000105, 2},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+      0x05050606, 0x00000303, 0x0D070607, 0x00000307, 3},
+    {QR_DIMM1, \
+      0x00000000, 0x00000000, 0x080A0000, 0x020A0000, 1},
+    {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+      0x04040000, 0x04040A0A, 0x04060000, 0x040C0A0E, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, \
+      0x01010A0A, 0x01010000, 0x01030A0B, 0x01090000, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \
+      0x05050E0E, 0x05050B0B, 0x05070E0F, 0x050D0B0F, 3}
+  };
+  //
+  // DIMM ODT Pattern (4 DIMMs per channel)
+  //
+  // Dimm Config ,
+  // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match
+  //
+  STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg4DIMMsODT[] = {
+    {ANY_DIMM3, \
+      0x00000000, 0x00000000, 0x00000000, 0x08080000, 1},
+    {ANY_DIMM2 + ANY_DIMM3, \
+      0x00000000, 0x04040808, 0x00000000, 0x0C0C0C0C, 2},
+    {ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, \
+      0x0C0C0000, 0x06060A0A, 0x0E0E0000, 0x0E0E0E0E, 3},
+    {ANY_DIMM0 + ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, \
+      0x0D0D0E0E, 0x07070B0B, 0x0F0F0F0F, 0x0F0F0F0F, 4}
+  };
+  //
+  // DIMM Write Leveling ODT Pattern for 1 or 2 Dimms Per Channel
+  //
+  // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match
+  //
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg2DIMMsWlODT[] = {
+    {SR_DIMM0,            {0x01, 0x00, 0x00, 0x00}, 1},
+    {DR_DIMM0,            {0x04, 0x00, 0x00, 0x00}, 1},
+    {QR_DIMM0,            {0x05, 0x00, 0x00, 0x00}, 1},
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {QR_DIMM1,            {0x00, 0x0A, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2},
+    {SR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {QR_DIMM0 + SR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2},
+    {QR_DIMM0 + DR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2},
+    {QR_DIMM0 + QR_DIMM1, {0x0B, 0x07, 0x0E, 0x0D}, 2}
+  };
+  //
+  // DIMM Write Leveling ODT Pattern 3 Dimms Per Channel
+  //
+  // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match
+  //
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg3DIMMsWlODT[] = {
+    {SR_DIMM2 + DR_DIMM2, {0x00, 0x00, 0x04, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0, {0x01, 0x02, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, {0x05, 0x00, 0x05, 0x00}, 2},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x07, 0x07, 0x07, 0x00}, 3},
+    {QR_DIMM1, {0x00, 0x0A, 0x00, 0x0A}, 1},
+    {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x00, 0x06, 0x0E, 0x0C}, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x0F, 0x07, 0x0F, 0x0D}, 3}
+  };
+  //
+  // DIMM Write Leveling ODT Pattern 4 Dimms Per Channel
+  //
+  // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match
+  //
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg4DIMMsWlODT[] = {
+    {ANY_DIMM3, {0x00, 0x00, 0x00, 0x08}, 1},
+    {ANY_DIMM2 + ANY_DIMM3, {0x00, 0x00, 0x0C, 0x0C}, 2},
+    {ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x00, 0x0E, 0x0E, 0x0E}, 3},
+    {ANY_DIMM0 + ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x0F, 0x0F, 0x0F, 0x0F}, 4}
+  };
+
+  UINT16 i;
+  UINT16 j;
+  UINT8  MaxDimmPerCH;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT8 DimmTpMatch;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT16 RC2RC8;
+  UINT32 PhyRODTCSLow;
+  UINT32 PhyRODTCSHigh;
+  UINT32 PhyWODTCSLow;
+  UINT32 PhyWODTCSHigh;
+  BOOLEAN SlowMode;
+  UINT8 PSCfgSize;
+  UINT8 PSCfgODTSize;
+  UINT8 PSCfgWlODTSize;
+  UINT8 PhyWLODT[4];
+
+  CONST ADV_R_PSCFG_ENTRY *PSCfgPtr;
+  CONST ADV_PSCFG_ODT_ENTRY *PSCfgODTPtr;
+  CONST ADV_R_PSCFG_WL_ODT_ENTRY *PSCfgWlODTPtr;
+  UINT8 *DimmsPerChPtr;
+
+  ASSERT (MemData != NULL);
+  ASSERT (CurrentChannel != NULL);
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  RC2RC8 = 0;
+  PhyRODTCSLow = 0;
+  PhyRODTCSHigh = 0;
+  PhyWODTCSLow = 0;
+  PhyWODTCSHigh = 0;
+  SlowMode = FALSE;
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_HY) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->RegDimmPresent == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  // Prepare inputs
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+  DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  if (MaxDimmPerCH == 4) {
+    PSCfgPtr = NULL;
+    PSCfgSize = 0;
+    PSCfgODTPtr = PSCfg4DIMMsODT;
+    PSCfgWlODTPtr = PSCfg4DIMMsWlODT;
+    PSCfgODTSize = sizeof (PSCfg4DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY);
+    PSCfgWlODTSize = sizeof (PSCfg4DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  } else if (MaxDimmPerCH == 3) {
+    PSCfgPtr = PSCfg3DIMMs;
+    PSCfgSize = sizeof (PSCfg3DIMMs) / sizeof (ADV_R_PSCFG_ENTRY);
+    PSCfgODTPtr = PSCfg3DIMMsODT;
+    PSCfgWlODTPtr = PSCfg3DIMMsWlODT;
+    PSCfgODTSize = sizeof (PSCfg3DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY);
+    PSCfgWlODTSize = sizeof (PSCfg3DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  } else {
+    PSCfgPtr = PSCfg2DIMMs;
+    PSCfgSize = sizeof (PSCfg2DIMMs) / sizeof (ADV_R_PSCFG_ENTRY);
+    PSCfgODTPtr = PSCfg2DIMMsODT;
+    PSCfgWlODTPtr = PSCfg2DIMMsWlODT;
+    PSCfgODTSize = sizeof (PSCfg2DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY);
+    PSCfgWlODTSize = sizeof (PSCfg2DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  }
+
+  // AddrTmgCTL and DctOdcCtl
+  if (MaxDimmPerCH != 4) {
+    for (i = 0; i < PSCfgSize; i++, PSCfgPtr++) {
+      if ((Speed != PSCfgPtr->Speed) || (Dimms != PSCfgPtr->Dimms)) {
+        continue;
+      }
+      DimmTpMatch = 0;
+      _DIMMRankType = DIMMRankType & PSCfgPtr->DIMMRankType;
+      for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+        if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+          DimmTpMatch++;
+        }
+      }
+      if (DimmTpMatch == PSCfgPtr->Dimms) {
+        AddrTmgCTL = PSCfgPtr->AddrTmg;
+        DctOdcCtl = 0x00223222;
+        RC2RC8 = PSCfgPtr->RC2RC8;
+        break;
+      }
+    }
+  }
+
+  //
+  // Overrides and/or exceptions
+  //
+  DimmTpMatch = 0;
+  for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+    if ((DIMMRankType & (UINT16) 0x03 << (j << 2)) != 0) {
+      DimmTpMatch++;
+    }
+  }
+  if (MaxDimmPerCH == 4) {
+    if (DimmTpMatch > 0) {
+      DctOdcCtl = 0x00223222;
+      if ((Speed == DDR800_FREQUENCY) && (DimmTpMatch == 1)) {
+        DctOdcCtl = 0x00113222;
+      }
+    }
+    if (DimmTpMatch >= 3) {
+      AddrTmgCTL |= 0x002F0000;
+    }
+    if (DimmTpMatch >= 2) {
+      RC2RC8 = 0x4040;
+    }
+  } else if ((MaxDimmPerCH == 3) && (CurrentChannel->Dimms == 3)) {
+    DctOdcCtl = 0x00113222;
+  } else {
+    if ((Dimms == 1) && (DimmTpMatch == 1)) {
+      DctOdcCtl = 0x00113222;
+    }
+  }
+
+  //RC2 and RC8
+  for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+    // CtrlWrd02(s) will contain the info. of SPD byte 63 after MemTDIMMPresence3 execution.
+    if (CurrentChannel->CtrlWrd02[j] > 0) {
+      if (CurrentChannel->CtrlWrd02[j] == 1) {
+        // Store real RC2 and RC8 value (High byte) into CtrlWrd02(s) and CtrlWrd08(s).
+        CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 12) & 0x000F;
+        CurrentChannel->CtrlWrd08[j] = (UINT8) (RC2RC8 >> 8) & 0x000F;
+      } else {
+        // Store real RC2 and RC8 value (low byte) into CtrlWrd02(s) and CtrlWrd08(s).
+        CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 4) & 0x000F;
+        CurrentChannel->CtrlWrd08[j] = (UINT8) RC2RC8 & 0x000F;
+      }
+    }
+  }
+
+  //Programmable ODT
+  for (i = 0; i  < PSCfgODTSize; i++, PSCfgODTPtr++) {
+    if (Dimms != PSCfgODTPtr->Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgODTPtr->DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgODTPtr->Dimms) {
+      PhyRODTCSLow = PSCfgODTPtr->PhyRODTCSLow;
+      PhyRODTCSHigh = PSCfgODTPtr->PhyRODTCSHigh;
+      PhyWODTCSLow = PSCfgODTPtr->PhyWODTCSLow;
+      PhyWODTCSHigh = PSCfgODTPtr->PhyWODTCSHigh;
+      break;
+    }
+  }
+
+  //WLODT
+  for (i = 0; i  < PSCfgWlODTSize; i++, PSCfgWlODTPtr++) {
+    if (Dimms != PSCfgWlODTPtr->Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgWlODTPtr->DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgWlODTPtr->Dimms) {
+      PhyWLODT[0] = PSCfgWlODTPtr->PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgWlODTPtr->PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgWlODTPtr->PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgWlODTPtr->PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  // Set ProcODT
+  DctOdcCtl |= 0x20000000;
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) HyRDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) HyRDdr3CKETri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) HyRDdr3CSTri;
+
+  switch (MaxDimmPerCH) {
+  case 3:
+    CurrentChannel->ODTTriMap = (UINT8 *) HyRDdr3ODTTri3D;
+    break;
+  case 4:
+    CurrentChannel->ODTTriMap = (UINT8 *) HyRDdr3ODTTri4D;
+    break;
+  default:
+    CurrentChannel->ODTTriMap = (UINT8 *) HyRDdr3ODTTri2D;  // Most conservative
+  }
+
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  CurrentChannel->PhyRODTCSLow  = PhyRODTCSLow;
+  CurrentChannel->PhyRODTCSHigh = PhyRODTCSHigh;
+  CurrentChannel->PhyWODTCSLow  = PhyWODTCSLow;
+  CurrentChannel->PhyWODTCSHigh = PhyWODTCSHigh;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/HY/mauhy3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/HY/mauhy3.c
new file mode 100644
index 0000000000..d598392316
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/HY/mauhy3.c
@@ -0,0 +1,356 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mauhy3.c
+ *
+ * Platform specific settings for HY DDR3 unbuffered dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+/* This file contains routine that add platform specific support AM3 */
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_HY_MAUHY3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA HyUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA HyUDdr3CKETri[] = {0x55, 0xAA};
+// Bit 0: M[B,A]0_ODT[0]
+// Bit 1: M[B,A]1_ODT[0]
+// Bit 2: M[B,A]0_ODT[1]
+// Bit 3: M[B,A]1_ODT[1]
+STATIC CONST UINT8 ROMDATA HyUDdr3ODTTri2D[] = {0x01, 0x04, 0x02, 0x08};
+// 3 dimms per channel
+// Dimm 0: BP_MEMODTx[0]
+// Dimm 1: BP_MEMODTx[3,1]
+// Dimm 2: BP_MEMODTx[2]
+STATIC CONST UINT8 ROMDATA HyUDdr3ODTTri3D[] = {0xFF, 0xFF, 0xFF, 0xFF};
+// Bit 0: M[B,A]0_CS_H/L[0]
+// Bit 1: M[B,A]0_CS_H/L[1]
+// Bit 2: M[B,A]0_CS_H/L[2]
+// Bit 3: M[B,A]0_CS_H/L[3]
+STATIC CONST UINT8 ROMDATA HyUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for HY DDR3 unbuffered dimms
+ *
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to HY MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to HY CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to HY ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to HY CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgUHy3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST PSCFG_ENTRY PSCfg[] = {
+    {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323},
+    {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323},
+    {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323},
+    {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323}
+  };
+
+  STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg2DIMMsODT[] = {
+    {SR_DIMM0, 0x00000000, 0x00000000, 0x00000001, 0x00000000, 1},
+    {DR_DIMM0, 0x00000000, 0x00000000, 0x00000104, 0x00000000, 1},
+    {SR_DIMM1, 0x00000000,0x00000000,0x00020000, 0x00000000, 1},
+    {DR_DIMM1, 0x00000000,0x00000000,0x02080000, 0x00000000, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, 0x01010202,0x00000000,0x09030603, 0x00000000, 2},
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg2DIMMsWlODT[] = {
+    {SR_DIMM0,            {0x01, 0x00, 0x00, 0x00}, 1},
+    {DR_DIMM0,            {0x04, 0x00, 0x00, 0x00}, 1},
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}
+  };
+
+  STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg3DIMMsODT[] = {
+    {SR_DIMM2 + DR_DIMM2, 0x00000000, 0x00000000, 0x00000000, 0x00000404, 1},
+    //{SR_DIMM0 + DR_DIMM0, 0x00000000, 0x00000000, 0x00000101, 0x00000000, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, 0x00000404, 0x00000101, 0x00000405, 0x00000105, 2},
+    //{SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, 0x05050606, 0x00000303, 0x0D070607, 0x00000307, 3},
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg3DIMMsWlODT[] = {
+    {SR_DIMM2 + DR_DIMM2, {0x00, 0x00, 0x04, 0x00}, 1},
+    //{SR_DIMM0 + DR_DIMM0, {0x01, 0x02, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, {0x05, 0x00, 0x05, 0x00}, 2},
+    //{SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x07, 0x07, 0x07, 0x00}, 3},
+  };
+
+  UINT16 i;
+  UINT16 j;
+  UINT8  MaxDimmPerCH;
+  UINT8 Loads;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT32 PhyRODTCSLow;
+  UINT32 PhyRODTCSHigh;
+  UINT32 PhyWODTCSLow;
+  UINT32 PhyWODTCSHigh;
+  UINT8 PhyWLODT[4];
+  UINT8 PSCfgODTSize;
+  UINT8 PSCfgWlODTSize;
+  BOOLEAN SlowMode;
+  UINT8 DimmTpMatch;
+  CONST ADV_PSCFG_ODT_ENTRY *PSCfgODTPtr;
+  CONST ADV_R_PSCFG_WL_ODT_ENTRY *PSCfgWlODTPtr;
+  UINT8 *DimmsPerChPtr;
+
+  ASSERT (MemData != NULL);
+  ASSERT (CurrentChannel != NULL);
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  PhyRODTCSLow = 0;
+  PhyRODTCSHigh = 0;
+  PhyWODTCSLow = 0;
+  PhyWODTCSHigh = 0;
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_HY) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->RegDimmPresent) {
+    return AGESA_UNSUPPORTED;
+  }
+  // Prepare inputs
+
+  DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  Loads = CurrentChannel->Loads;
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) {
+    SlowMode = TRUE;   // 2T
+  } else {
+    SlowMode = FALSE;  // 1T
+  }
+
+  for (i = 0; i < GET_SIZE_OF (PSCfg); i++) {
+    if (Speed == PSCfg[i].Speed) {
+      if (Loads <= PSCfg[i].Loads) {
+        AddrTmgCTL = PSCfg[i].AddrTmg;
+        DctOdcCtl = PSCfg[i].Odc;
+        break;
+      }
+    }
+  }
+
+  ASSERT (i < GET_SIZE_OF (PSCfg));
+
+  if (MaxDimmPerCH == 3) {
+    PSCfgODTPtr = PSCfg3DIMMsODT;
+    PSCfgWlODTPtr = PSCfg3DIMMsWlODT;
+    PSCfgODTSize = sizeof (PSCfg3DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY);
+    PSCfgWlODTSize = sizeof (PSCfg3DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  } else {
+    PSCfgODTPtr = PSCfg2DIMMsODT;
+    PSCfgWlODTPtr = PSCfg2DIMMsWlODT;
+    PSCfgODTSize = sizeof (PSCfg2DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY);
+    PSCfgWlODTSize = sizeof (PSCfg2DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY);
+  }
+
+  // Programmable ODT
+  for (i = 0; i  < PSCfgODTSize; i++, PSCfgODTPtr++) {
+    if (Dimms != PSCfgODTPtr->Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgODTPtr->DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgODTPtr->Dimms) {
+      PhyRODTCSLow = PSCfgODTPtr->PhyRODTCSLow;
+      PhyRODTCSHigh = PSCfgODTPtr->PhyRODTCSHigh;
+      PhyWODTCSLow = PSCfgODTPtr->PhyWODTCSLow;
+      PhyWODTCSHigh = PSCfgODTPtr->PhyWODTCSHigh;
+      break;
+    }
+  }
+
+  // WL ODT
+  for (i = 0; i  < PSCfgWlODTSize; i++, PSCfgWlODTPtr++) {
+    if (Dimms != PSCfgWlODTPtr->Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgWlODTPtr->DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgWlODTPtr->Dimms) {
+      PhyWLODT[0] = PSCfgWlODTPtr->PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgWlODTPtr->PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgWlODTPtr->PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgWlODTPtr->PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  //
+  // Overrides and/or exceptions
+  //
+  if (Dimms == 1) {
+    if (Loads >= 16) {
+      if (Speed == DDR800_FREQUENCY) {
+        AddrTmgCTL = 0x003B0000;
+      } else if (Speed == DDR1066_FREQUENCY) {
+        AddrTmgCTL = 0x00380000;
+      } else if (Speed == DDR1333_FREQUENCY) {
+        AddrTmgCTL = 0x00360000;
+      } else {
+        AddrTmgCTL = 0x00340000;
+        SlowMode = TRUE;
+      }
+    } else {
+      AddrTmgCTL = 0;
+    }
+    DctOdcCtl = 0x20113222;
+  }
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) HyUDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) HyUDdr3CKETri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) HyUDdr3CSTri;
+
+  switch (MaxDimmPerCH) {
+  case 3:
+    CurrentChannel->ODTTriMap = (UINT8 *) HyUDdr3ODTTri3D;
+    break;
+  default:
+    CurrentChannel->ODTTriMap = (UINT8 *) HyUDdr3ODTTri2D;  // Most conservative
+  }
+
+  CurrentChannel->DctEccDqsLike = 0x0403;
+  CurrentChannel->DctEccDqsScale = 0x70;
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  CurrentChannel->PhyRODTCSLow  = PhyRODTCSLow;
+  CurrentChannel->PhyRODTCSHigh = PhyRODTCSHigh;
+  CurrentChannel->PhyWODTCSLow  = PhyWODTCSLow;
+  CurrentChannel->PhyWODTCSHigh = PhyWODTCSHigh;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/OR/maror3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/OR/maror3.c
new file mode 100644
index 0000000000..c73f7ea4d2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/OR/maror3.c
@@ -0,0 +1,105 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * maror3.c
+ *
+ * Memory Controller, registered dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support AM3 */
+
+
+#include "AGESA.h"
+#include "ma.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_ARDK_OR_MAROR3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for OR DDR3 L1 system
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID        Socket number
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgROr3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/OR/mauor3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/OR/mauor3.c
new file mode 100644
index 0000000000..7c240a9004
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/OR/mauor3.c
@@ -0,0 +1,106 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mauor3.c
+ *
+ * Platform specific settings for OR DDR3 unbuffered dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+/* This file contains routine that add platform specific support AM3 */
+
+
+#include "AGESA.h"
+#include "ma.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_ARDK_OR_MAUOR3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for OR DDR3 unbuffered dimms
+ *
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgUOr3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/PH/masph3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/PH/masph3.c
new file mode 100644
index 0000000000..bcecad9453
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/PH/masph3.c
@@ -0,0 +1,260 @@
+/* $NoKeywords:$ */
+/*
+ * @file
+ *
+ * masph3.c
+ *
+ * Platform specific settings for PH DDR3 SO-dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk/PH)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support S1g4 */
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "ma.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_PH_MASPH3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA PhSDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA PhSDdr3CKETri[] = {0x55, 0xAA};
+// Bit 0: M[B,A]0_ODT[0]
+// Bit 1: M[B,A]1_ODT[0]
+// Bit 2: M[B,A]0_ODT[1]
+// Bit 3: M[B,A]1_ODT[1]
+STATIC CONST UINT8 ROMDATA PhSDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08};
+// Bit 0: M[B,A]0_CS_H/L[0]
+// Bit 1: M[B,A]0_CS_H/L[1]
+// Bit 2: M[B,A]0_CS_H/L[2]
+// Bit 3: M[B,A]0_CS_H/L[3]
+STATIC CONST UINT8 ROMDATA PhSDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for PH DDR3 SO-dimms
+ *
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to RB MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to RB CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to RB ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to RB CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgSPh3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST PSCFG_ENTRY PSCfg[] = {
+    {DDR800_FREQUENCY, 0xFF, 0x00000000, 0x00113222},
+    {DDR1066_FREQUENCY, 0xFF, 0x00000000, 0x10113222},
+    {DDR1333_FREQUENCY, 0xFF, 0x00000000, 0x20113222},
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = {
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}
+  };
+
+  UINT16 i;
+  UINT16 j;
+  UINT8 Loads;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT8 PhyWLODT[4];
+  BOOLEAN SlowMode;
+  UINT8  MaxDimmPerCH;
+  UINT8 *DimmsPerChPtr;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT8 DimmTpMatch;
+
+  ASSERT (MemData != 0);
+  ASSERT (CurrentChannel != 0);
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+  SlowMode = FALSE;  // 1T
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_PH) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+  // Prepare inputs
+  Loads = CurrentChannel->Loads;
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  for (i = 0; i < GET_SIZE_OF (PSCfg); i++) {
+    if (Speed == PSCfg[i].Speed) {
+      if (Loads <= PSCfg[i].Loads) {
+        AddrTmgCTL = PSCfg[i].AddrTmg;
+        DctOdcCtl = PSCfg[i].Odc;
+        break;
+      }
+    }
+  }
+
+  // WL ODT
+  for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) {
+    if (Dimms != PSCfgDIMMWlODT[i].Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) {
+      PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  //
+  // Overrides and/or exceptions
+  //
+  if (MaxDimmPerCH == 2) {
+    if (Dimms == 2) {
+      DctOdcCtl = 0x20223323;
+      SlowMode = TRUE;
+      if (Speed == DDR800_FREQUENCY) {
+        AddrTmgCTL = 0x00000039;
+      } else if (Speed == DDR1066_FREQUENCY) {
+        AddrTmgCTL = 0x00000037;
+      }
+    } else {
+      DctOdcCtl = 0x20113222;
+    }
+  } else {
+    if (CurrentChannel->DimmSRPresent != 0) {
+      PhyWLODT[0] = 1;
+    } else if (CurrentChannel->DimmDrPresent != 0) {
+      PhyWLODT[0] = 4;
+    }
+  }
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) PhSDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) PhSDdr3CKETri;
+  CurrentChannel->ODTTriMap = (UINT8 *) PhSDdr3ODTTri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) PhSDdr3CSTri;
+
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/PH/mauPh3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/PH/mauPh3.c
new file mode 100644
index 0000000000..c327655bd6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/PH/mauPh3.c
@@ -0,0 +1,259 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mauph3.c
+ *
+ * Platform specific settings for PH DDR3 unbuffered dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk/PH)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support AM3 */
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_PH_MAUPH3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA PhUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA PhUDdr3CKETri[] = {0x55, 0xAA};
+// Bit 0: M[B,A]0_ODT[0]
+// Bit 1: M[B,A]1_ODT[0]
+// Bit 2: M[B,A]0_ODT[1]
+// Bit 3: M[B,A]1_ODT[1]
+STATIC CONST UINT8 ROMDATA PhUDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08};
+// Bit 0: M[B,A]0_CS_H/L[0]
+// Bit 1: M[B,A]0_CS_H/L[1]
+// Bit 2: M[B,A]0_CS_H/L[2]
+// Bit 3: M[B,A]0_CS_H/L[3]
+STATIC CONST UINT8 ROMDATA PhUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for PH DDR3 unbuffered dimms
+ *
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to PH MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to PH CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to PH ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to PH CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgUPh3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST PSCFG_ENTRY PSCfg1Dimm[] = {
+    {DDR800_FREQUENCY, 0x10, 0x003B0000, 0x20113222},
+    {DDR1066_FREQUENCY, 0x10, 0x00380000, 0x20113222},
+    {DDR1333_FREQUENCY, 0x10, 0x00360000, 0x20113222},
+    {DDR1600_FREQUENCY, 0x10, 0x00340000, 0x20113222}
+  };
+  STATIC CONST PSCFG_ENTRY PSCfg2Dimm[] = {
+    {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323},
+    {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323},
+    {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323},
+    {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323}
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = {
+    {SR_DIMM0,            {0x01, 0x00, 0x00, 0x00}, 1},
+    {DR_DIMM0,            {0x04, 0x00, 0x00, 0x00}, 1},
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}
+  };
+
+  UINT16 i;
+  UINT16 j;
+  UINT8 Loads;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT8 PhyWLODT[4];
+  BOOLEAN SlowMode;
+  UINT8 DimmTpMatch;
+
+  ASSERT (MemData != 0);
+  ASSERT (CurrentChannel != 0);
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_PH) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if ((CurrentChannel->RegDimmPresent != 0) || (CurrentChannel->SODimmPresent != 0)) {
+    return AGESA_UNSUPPORTED;
+  }
+  // Prepare inputs
+  Loads = CurrentChannel->Loads;
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) {
+    SlowMode = TRUE;   // 2T
+  } else if ((Speed == DDR1600_FREQUENCY) && (Dimms == 1) && (Loads >= 16)) {
+    SlowMode = TRUE;   // 2T
+  } else {
+    SlowMode = FALSE;  // 1T
+  }
+
+  if (Dimms == 1) {
+    for (i = 0; i < GET_SIZE_OF (PSCfg1Dimm); i++) {
+      if (Speed == PSCfg1Dimm[i].Speed) {
+        if (Loads >= PSCfg1Dimm[i].Loads) {
+          AddrTmgCTL = PSCfg1Dimm[i].AddrTmg;
+          DctOdcCtl = PSCfg1Dimm[i].Odc;
+        } else {
+          DctOdcCtl = 0x20113222;
+        }
+        break;
+      }
+    }
+    ASSERT (i < GET_SIZE_OF (PSCfg1Dimm));
+  } else {
+    for (i = 0; i < GET_SIZE_OF (PSCfg2Dimm); i++) {
+      if (Speed == PSCfg2Dimm[i].Speed) {
+        if (Loads <= PSCfg2Dimm[i].Loads) {
+          AddrTmgCTL = PSCfg2Dimm[i].AddrTmg;
+          DctOdcCtl = PSCfg2Dimm[i].Odc;
+          break;
+        }
+      }
+    }
+    ASSERT (i < GET_SIZE_OF (PSCfg2Dimm));
+  }
+
+  // WL ODT
+  for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) {
+    if (Dimms != PSCfgDIMMWlODT[i].Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) {
+      PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) PhUDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) PhUDdr3CKETri;
+  CurrentChannel->ODTTriMap = (UINT8 *) PhUDdr3ODTTri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) PhUDdr3CSTri;
+
+  CurrentChannel->DctEccDqsLike = 0x0403;
+  CurrentChannel->DctEccDqsScale = 0x70;
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/RB/masRb3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/RB/masRb3.c
new file mode 100644
index 0000000000..ce80cae460
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/RB/masRb3.c
@@ -0,0 +1,259 @@
+/* $NoKeywords:$ */
+/*
+ * @file
+ *
+ * masRb3.c
+ *
+ * Platform specific settings for RB DDR3 SO-dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk/RB)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "ma.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_RB_MASRB3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA RbSDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA RbSDdr3CKETri[] = {0x55, 0xAA};
+// Bit 0: M[B,A]0_ODT[0]
+// Bit 1: M[B,A]1_ODT[0]
+// Bit 2: M[B,A]0_ODT[1]
+// Bit 3: M[B,A]1_ODT[1]
+STATIC CONST UINT8 ROMDATA RbSDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08};
+// Bit 0: M[B,A]0_CS_H/L[0]
+// Bit 1: M[B,A]0_CS_H/L[1]
+// Bit 2: M[B,A]0_CS_H/L[2]
+// Bit 3: M[B,A]0_CS_H/L[3]
+STATIC CONST UINT8 ROMDATA RbSDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for RB DDR3 SO-dimms
+ *
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to RB MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to RB CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to RB ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to RB CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgSRb3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST PSCFG_ENTRY PSCfg[] = {
+    {DDR800_FREQUENCY, 0xFF, 0x00000000, 0x00113222},
+    {DDR1066_FREQUENCY, 0xFF, 0x00000000, 0x10113222},
+    {DDR1333_FREQUENCY, 0xFF, 0x00000000, 0x20113222},
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = {
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}
+  };
+
+  UINT16 i;
+  UINT16 j;
+  UINT8 Loads;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT8 PhyWLODT[4];
+  BOOLEAN SlowMode;
+  UINT8  MaxDimmPerCH;
+  UINT8 *DimmsPerChPtr;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT8 DimmTpMatch;
+
+  ASSERT (MemData != 0);
+  ASSERT (CurrentChannel != 0);
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+  SlowMode = FALSE;  // 1T
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+  // Prepare inputs
+  Loads = CurrentChannel->Loads;
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  for (i = 0; i < GET_SIZE_OF (PSCfg); i++) {
+    if (Speed == PSCfg[i].Speed) {
+      if (Loads <= PSCfg[i].Loads) {
+        AddrTmgCTL = PSCfg[i].AddrTmg;
+        DctOdcCtl = PSCfg[i].Odc;
+        break;
+      }
+    }
+  }
+
+  // WL ODT
+  for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) {
+    if (Dimms != PSCfgDIMMWlODT[i].Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) {
+      PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  //
+  // Overrides and/or exceptions
+  //
+  if (MaxDimmPerCH == 2) {
+    if (Dimms == 2) {
+      DctOdcCtl = 0x20223323;
+      SlowMode = TRUE;
+      if (Speed == DDR800_FREQUENCY) {
+        AddrTmgCTL = 0x00000039;
+      } else if (Speed == DDR1066_FREQUENCY) {
+        AddrTmgCTL = 0x00000037;
+      }
+    } else {
+      DctOdcCtl = 0x20113222;
+    }
+  } else {
+    if (CurrentChannel->DimmSRPresent != 0) {
+      PhyWLODT[0] = 1;
+    } else if (CurrentChannel->DimmDrPresent != 0) {
+      PhyWLODT[0] = 4;
+    }
+  }
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) RbSDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) RbSDdr3CKETri;
+  CurrentChannel->ODTTriMap = (UINT8 *) RbSDdr3ODTTri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) RbSDdr3CSTri;
+
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/RB/mauRb3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/RB/mauRb3.c
new file mode 100644
index 0000000000..7fc27b52ac
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/RB/mauRb3.c
@@ -0,0 +1,258 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mauRb3.c
+ *
+ * Platform specific settings for RB DDR3 unbuffered dimms
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk/RB)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_RB_MAURB3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+STATIC CONST UINT8 ROMDATA RbUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+// Even chip select maps to M[B,A]_CKE[0]
+// Odd chip select maps to M[B,A]_CKE[1]
+STATIC CONST UINT8 ROMDATA RbUDdr3CKETri[] = {0x55, 0xAA};
+// Bit 0: M[B,A]0_ODT[0]
+// Bit 1: M[B,A]1_ODT[0]
+// Bit 2: M[B,A]0_ODT[1]
+// Bit 3: M[B,A]1_ODT[1]
+STATIC CONST UINT8 ROMDATA RbUDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08};
+// Bit 0: M[B,A]0_CS_H/L[0]
+// Bit 1: M[B,A]0_CS_H/L[1]
+// Bit 2: M[B,A]0_CS_H/L[2]
+// Bit 3: M[B,A]0_CS_H/L[3]
+STATIC CONST UINT8 ROMDATA RbUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is function sets the platform specific settings for RB DDR3 Unbuffered dimms
+ *
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID          Socket number
+ *     @param[in,out]   *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->MemClkDisMap     Points this pointer to RB MemClkDis table
+ *     @return          CurrentChannel->ChipSelTriMap    Points this pointer to RB CS table
+ *     @return          CurrentChannel->CKETriMap        Points this pointer to RB ODT table
+ *     @return          CurrentChannel->ODTTriMap        Points this pointer to RB CKE table
+ *     @return          CurrentChannel->DctEccDQSLike      Indicates the bytes that should be averaged for ECC
+ *     @return          CurrentChannel->DctEccDQSScale     Indicates the scale that should be used for Averaging ECC byte
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->SlowMode             Slow Mode
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgURb3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST PSCFG_ENTRY PSCfg1Dimm[] = {
+    {DDR800_FREQUENCY, 0x10, 0x003B0000, 0x20113222},
+    {DDR1066_FREQUENCY, 0x10, 0x00380000, 0x20113222},
+    {DDR1333_FREQUENCY, 0x10, 0x00360000, 0x20113222},
+    {DDR1600_FREQUENCY, 0x10, 0x00340000, 0x20113222}
+  };
+  STATIC CONST PSCFG_ENTRY PSCfg2Dimm[] = {
+    {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323},
+    {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323},
+    {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323},
+    {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323}
+  };
+
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = {
+    {SR_DIMM0,            {0x01, 0x00, 0x00, 0x00}, 1},
+    {DR_DIMM0,            {0x04, 0x00, 0x00, 0x00}, 1},
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}
+  };
+
+  UINT16 i;
+  UINT16 j;
+  UINT8 Loads;
+  UINT8 Dimms;
+  UINT16 Speed;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT8 PhyWLODT[4];
+  BOOLEAN SlowMode;
+  UINT8 DimmTpMatch;
+
+  ASSERT (MemData != 0);
+  ASSERT (CurrentChannel != 0);
+
+  AddrTmgCTL = 0;
+  DctOdcCtl = 0;
+  PhyWLODT[0] = 0x0F;
+  PhyWLODT[1] = 0x0F;
+  PhyWLODT[2] = 0x0F;
+  PhyWLODT[3] = 0x0F;
+
+  if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if ((CurrentChannel->RegDimmPresent != 0) || (CurrentChannel->SODimmPresent != 0)) {
+    return AGESA_UNSUPPORTED;
+  }
+  // Prepare inputs
+  Loads = CurrentChannel->Loads;
+  Dimms = CurrentChannel->Dimms;
+  Speed = CurrentChannel->DCTPtr->Timings.Speed;
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+
+  if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) {
+    SlowMode = TRUE;   // 2T
+  } else if ((Speed == DDR1600_FREQUENCY) && (Dimms == 1) && (Loads >= 16)) {
+    SlowMode = TRUE;   // 2T
+  } else {
+    SlowMode = FALSE;  // 1T
+  }
+
+  if (Dimms == 1) {
+    for (i = 0; i < GET_SIZE_OF (PSCfg1Dimm); i++) {
+      if (Speed == PSCfg1Dimm[i].Speed) {
+        if (Loads >= PSCfg1Dimm[i].Loads) {
+          AddrTmgCTL = PSCfg1Dimm[i].AddrTmg;
+          DctOdcCtl = PSCfg1Dimm[i].Odc;
+        } else {
+          DctOdcCtl = 0x20113222;
+        }
+        break;
+      }
+    }
+    ASSERT (i < GET_SIZE_OF (PSCfg1Dimm));
+  } else {
+    for (i = 0; i < GET_SIZE_OF (PSCfg2Dimm); i++) {
+      if (Speed == PSCfg2Dimm[i].Speed) {
+        if (Loads <= PSCfg2Dimm[i].Loads) {
+          AddrTmgCTL = PSCfg2Dimm[i].AddrTmg;
+          DctOdcCtl = PSCfg2Dimm[i].Odc;
+          break;
+        }
+      }
+    }
+    ASSERT (i < GET_SIZE_OF (PSCfg2Dimm));
+  }
+
+  // WL ODT
+  for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) {
+    if (Dimms != PSCfgDIMMWlODT[i].Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) {
+      PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3];
+      break;
+    }
+  }
+
+  CurrentChannel->MemClkDisMap = (UINT8 *) RbUDdr3CLKDis;
+  CurrentChannel->CKETriMap = (UINT8 *) RbUDdr3CKETri;
+  CurrentChannel->ODTTriMap = (UINT8 *) RbUDdr3ODTTri;
+  CurrentChannel->ChipSelTriMap = (UINT8 *) RbUDdr3CSTri;
+
+  CurrentChannel->DctEccDqsLike = 0x0403;
+  CurrentChannel->DctEccDqsScale = 0x70;
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+  for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
+    CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
+  }
+  CurrentChannel->SlowMode = SlowMode;
+
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/ma.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/ma.c
new file mode 100644
index 0000000000..67cdcc23d8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ardk/ma.c
@@ -0,0 +1,146 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * ma.c
+ *
+ * Initializes ARDK Block
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 50705 $ @e \$Date: 2011-04-13 02:44:27 -0600 (Wed, 13 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "ma.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_MA_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This is the default return function of the ARDK block. The function always
+ *    returns   AGESA_UNSUPPORTED
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID        Socket number
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_UNSUPPORTED  AGESA status indicating that default is unsupported
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgDef (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  return AGESA_UNSUPPORTED;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function returns the rank type map of a channel.
+ *
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          UINT16 - The map of rank type.
+ *
+ */
+UINT16
+MemAGetPsRankType (
+  IN       CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  UINT8 i;
+  UINT16 DIMMRankType;
+
+  DIMMRankType = 0;
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+    if (CurrentChannel->MCTPtr->Status[SbLrdimms]) {
+      if ((CurrentChannel->LrDimmPresent & (UINT8) 1 << i) != 0) {
+        DIMMRankType |= (UINT16) 1 << (i << 2);
+      }
+    } else {
+      if ((CurrentChannel->DimmQrPresent & (UINT8) 1 << i) != 0) {
+        if (i < 2) {
+          DIMMRankType |= (UINT16) 4 << (i << 2);
+        }
+      } else if ((CurrentChannel->DimmDrPresent & (UINT8) 1 << i) != 0) {
+        DIMMRankType |= (UINT16) 2 << (i << 2);
+      } else if ((CurrentChannel->DimmSRPresent & (UINT8) 1 << i) != 0) {
+        DIMMRankType |= (UINT16) 1 << (i << 2);
+      }
+    }
+  }
+  return DIMMRankType;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CHINTLV/mfchi.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CHINTLV/mfchi.c
new file mode 100644
index 0000000000..e5616130a1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CHINTLV/mfchi.c
@@ -0,0 +1,212 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfchi.c
+ *
+ * Feature Channel interleaving support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/Chintlv)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "mfchi.h"
+#include "Ids.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_CHINTLV_MFCHI_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define _4GB_ (0x10000 >> 10)
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   MemFInterleaveChannels:
+ *
+ *  Applies DIMM channel interleaving if enabled, if not ganged mode, and
+ *  there are valid dimms in both channels.  Called once per Node.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFInterleaveChannels (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 DramBase;
+  UINT32 DctSelBase;
+  UINT32 HoleSize;
+  UINT32 HoleBase;
+  UINT32 HoleOffset;
+  UINT32 Dct0Size;
+  UINT32 Dct1Size;
+  UINT32 SmallerDct;
+  UINT8 DctSelIntLvAddr;
+  UINT8 DctSelHi;
+  UINT8 DctSelHiRngEn;
+  UINT32 HoleValid;
+
+  MEM_PARAMETER_STRUCT *RefPtr;
+  DIE_STRUCT *MCTPtr;
+
+  ASSERT (NBPtr != NULL);
+
+  RefPtr = NBPtr->RefPtr;
+
+  DctSelIntLvAddr = NBPtr->DefDctSelIntLvAddr;
+  if (RefPtr->EnableChannelIntlv) {
+    HoleSize = 0;
+    HoleBase = 0;
+    if (RefPtr->GStatus[GsbSoftHole] || RefPtr->GStatus[GsbHWHole]) {
+      // HoleBase scaled from [47:16] to [47:26]
+      HoleBase = RefPtr->HoleBase >> 10;
+      HoleSize = _4GB_ - HoleBase;
+    }
+
+    MCTPtr = NBPtr->MCTPtr;
+
+    HoleValid = NBPtr->GetBitField (NBPtr, BFDramHoleValid);
+    if ((!MCTPtr->GangedMode) &&
+        (MCTPtr->DctData[0].Timings.DctMemSize != 0) &&
+        (MCTPtr->DctData[1].Timings.DctMemSize != 0)) {
+      // DramBase scaled [47:16] to [47:26]
+      DramBase = MCTPtr->NodeSysBase >> 10;
+      // Scale NodeSysLimit [47:16] to [47:26]
+      Dct1Size = (MCTPtr->NodeSysLimit + 1) >> 10;
+      Dct0Size = NBPtr->GetBitField (NBPtr, BFDctSelBaseOffset);
+      if ((Dct0Size >= _4GB_) && (DramBase < HoleBase)) {
+        Dct0Size -= HoleSize;
+      }
+      if ((Dct1Size >= _4GB_) && (DramBase < HoleBase)) {
+        Dct1Size -= HoleSize;
+      }
+      Dct1Size -= Dct0Size;
+      Dct0Size -= DramBase;
+
+       // Select the bigger size DCT to put in DctSelHi
+      DctSelHiRngEn = 1;
+      DctSelHi = 0;
+      SmallerDct = Dct1Size;
+      if (Dct1Size == Dct0Size) {
+        SmallerDct = 0;
+        DctSelHiRngEn = 0;
+      } else if (Dct1Size > Dct0Size) {
+        SmallerDct = Dct0Size;
+        DctSelHi = 1;
+      }
+
+      if (SmallerDct != 0) {
+        DctSelBase = (SmallerDct * 2) + DramBase;
+      } else {
+        DctSelBase = 0;
+      }
+      if ((DctSelBase >= HoleBase) && (DramBase < HoleBase)) {
+        DctSelBase += HoleSize;
+      }
+      IDS_OPTION_HOOK (IDS_CHANNEL_INTERLEAVE, &DctSelIntLvAddr, &(NBPtr->MemPtr->StdHeader));
+      NBPtr->SetBitField (NBPtr, BFDctSelBaseAddr, DctSelBase >> 1);
+      NBPtr->SetBitField (NBPtr, BFDctSelHiRngEn, DctSelHiRngEn);
+      NBPtr->SetBitField (NBPtr, BFDctSelHi, DctSelHi);
+      NBPtr->SetBitField (NBPtr, BFDctSelIntLvAddr, DctSelIntLvAddr);
+      NBPtr->SetBitField (NBPtr, BFDctSelIntLvEn, 1);
+
+       // DctSelBaseOffset = DctSelBaseAddr - Interleaved region
+      NBPtr->SetBitField (NBPtr, BFDctSelBaseOffset, DctSelBase - SmallerDct);
+
+       // Adjust DramHoleOffset
+      if (HoleValid != 0) {
+        HoleOffset = DramBase;
+        if ((DctSelBase < HoleBase) && (DctSelBase != 0)) {
+          HoleOffset += (DctSelBase - DramBase) >> 1;
+        }
+        HoleOffset += HoleSize;
+        NBPtr->SetBitField (NBPtr, BFDramHoleOffset, HoleOffset << 3);
+      }
+    } else {
+      //
+      // Channel Interleaving is requested but cannot be enabled
+      //
+      PutEventLog (AGESA_WARNING, MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED, NBPtr->Node, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_WARNING, MCTPtr);
+    }
+
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CHINTLV/mfchi.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CHINTLV/mfchi.h
new file mode 100644
index 0000000000..55d31610d5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CHINTLV/mfchi.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfchi.h
+ *
+ * Feature channel interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+#ifndef _MFCHI_H_
+#define _MFCHI_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFInterleaveChannels (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MFCHI_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CSINTLV/mfcsi.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CSINTLV/mfcsi.c
new file mode 100644
index 0000000000..112b0b6482
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CSINTLV/mfcsi.c
@@ -0,0 +1,356 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfcsi.c
+ *
+ * Feature bank interleaving support (AKA Chip Select Interleaving )
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/Csintlv)
+ * @e \$Revision: 55216 $ @e \$Date: 2011-06-17 10:27:08 -0600 (Fri, 17 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+/* This file contains functions for Chip Select interleaving */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mfcsi.h"
+#include "Ids.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_CSINTLV_MFCSI_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemFDctInterleaveBanks (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+CsIntSwap (
+  IN OUT   UINT32 *BaseMaskRegPtr,
+  IN       UINT8 EnChipSels,
+  IN       UINT8 LoBit,
+  IN       UINT8 HiBit
+  );
+
+BOOLEAN
+MemFUndoInterleaveBanks (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function Applies DIMM bank (chip-select) interleaving if enabled
+ *      and if all criteria are met.  Interleaves chip-selects on page boundaries.
+ *      This function calls subfunctions that sets up CS interleaving on multiple Sockets
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFInterleaveBanks (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  BOOLEAN RetFlag;
+
+  ASSERT (NBPtr != NULL);
+
+  RetFlag = FALSE;
+  if (NBPtr->RefPtr->EnableBankIntlv) {
+    if (NBPtr->MCTPtr->NodeMemSize) {
+      for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+        NBPtr->SwitchDCT (NBPtr, Dct);
+        RetFlag |= MemFDctInterleaveBanks (NBPtr);
+      }
+    }
+  }
+  return RetFlag;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     This function checks if bank interleaving has been enabled or not. If yes, it will
+ *     undo bank interleaving. Otherwise, it does nothing.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  Bank interleaving has been enabled.
+ *     @return          FALSE - Bank interleaving has not been enabled.
+ */
+
+BOOLEAN
+MemFUndoInterleaveBanks (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Cs;
+  UINT8 Dct;
+  UINT32 CSMask;
+  BOOLEAN CSIntlvEnabled;
+  BOOLEAN RetFlag;
+
+  ASSERT (NBPtr != NULL);
+
+  RetFlag = FALSE;
+
+  if (NBPtr->RefPtr->EnableBankIntlv) {
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize) {
+        CSIntlvEnabled = FALSE;
+        for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs++) {
+          if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 1) != 0) {
+            CSMask = NBPtr->GetBitField (NBPtr, BFCSMask0Reg + (Cs / 2));
+            if (((CSMask >> 5) & 0x1FF) != 0x1FF) {
+              CSIntlvEnabled = TRUE;
+              break;
+            }
+          }
+        }
+        if (CSIntlvEnabled) {
+          MemFDctInterleaveBanks (NBPtr);
+          RetFlag = TRUE;
+        }
+      }
+    }
+  }
+  return RetFlag;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function Applies DIMM bank (chip-select) interleaving if enabled
+ *      and if all criteria are met.  Interleaves chip-selects on page boundaries.
+ *      This function is run once per Socket
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  Register bits have been swapped.
+ *     @return          FALSE - Register bits have not been swapped.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemFDctInterleaveBanks (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Cs;
+  UINT8 EnChipSels;
+  UINT8 BankEncd;
+  UINT8 BankEncd0;
+  UINT8 i;
+  UINT8 j;
+  UINT32 BankAddrReg;
+  UINT32 BaseRegS0;
+  UINT32 BaseRegS1;
+  UINT32 MaskReg;
+  UINT8 Offset;
+  UINT8 Dct;
+
+  ASSERT (NBPtr != NULL);
+
+  Dct = NBPtr->Dct;
+
+  // Check if CS interleaving can be enabled
+  EnChipSels = 0;
+  BankEncd0 = 0xFF;
+  Offset = 0;
+  for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs++) {
+    if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 3) != 0) {
+      BankAddrReg = NBPtr->GetBitField (NBPtr, BFDramBankAddrReg);
+      BankEncd = (UINT8) ((BankAddrReg >> ((Cs / 2) * 4)) & 0xF);
+      if (BankEncd0 == 0xFF) {
+        BankEncd0 = BankEncd;
+      } else if (BankEncd0 != BankEncd) {
+        break;
+      }
+      if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 1) != 0) {
+        EnChipSels++;
+      }
+    }
+  }
+
+  // Swap Dram Base/Mask Addr to enable CS interleaving
+  if ((Cs == MAX_CS_PER_CHANNEL) && ((EnChipSels == 2) || (EnChipSels == 4) || (EnChipSels == 8))) {
+    NBPtr->TechPtr->GetCSIntLvAddr (BankEncd0, &i, &j);
+    // Family specific CS interleaving low address adjustment
+    NBPtr->FamilySpecificHook[AdjustCSIntLvLowAddr] (NBPtr, &i);
+
+    if (NBPtr->MCTPtr->Status[Sb128bitmode]) {
+      i++;
+      j++;
+    }
+
+    for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs += 2) {
+      //
+      // LRDIMMS - Add an offset to the bit positions specified based on D18F2x[6C:60]_dct[1:0][RankDef] as follows:
+      //    RankDef=0xb: 0 RankDef=10b: 1 RankDef=11b: 2
+      //    Using RankMult information:  Lo/HiBit <<= (Mult >> 1)
+      //
+      if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+        Offset = ((NBPtr->ChannelPtr->LrDimmRankMult[Cs >> 1]) >> 1);
+      }
+      BaseRegS0 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs);
+      BaseRegS1 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs + 1);
+      if (((BaseRegS0 | BaseRegS1) & 1) != 0) {
+        // Swap Mask register bits
+        MaskReg = NBPtr->GetBitField (NBPtr, BFCSMask0Reg + (Cs / 2));
+        CsIntSwap (&MaskReg, EnChipSels, (i + Offset), (j + Offset));
+        NBPtr->SetBitField (NBPtr, BFCSMask0Reg + (Cs / 2), MaskReg);
+
+        // Swap Base register bits
+        CsIntSwap (&BaseRegS0, EnChipSels, (i + Offset), (j + Offset));
+        NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + Cs, BaseRegS0);
+        CsIntSwap (&BaseRegS1, EnChipSels, (i + Offset), (j + Offset));
+        NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + Cs + 1, BaseRegS1);
+      }
+    }
+    //
+    // Bank Interleaving is requested and has been enabled as well
+    //
+    NBPtr->MCTPtr->DctData[Dct].BkIntDis = FALSE;
+    return TRUE;
+  } else {
+    //
+    // Bank Interleaving is requested but cannot be enabled
+    //
+    PutEventLog (AGESA_WARNING, MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_WARNING, NBPtr->MCTPtr);
+    NBPtr->MCTPtr->DctData[Dct].BkIntDis = TRUE;
+  }
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This supporting function swaps Chip selects
+ *
+ *     @param[in,out]  *BaseMaskRegPtr   - Pointer to the Mask Register
+ *     @param[in]      *EnChipSels    - Chip Selects to Enable
+ *     @param[in]      *LoBit         - Lowest Bit
+ *     @param[in]      *HiBit         - Highest Bit
+ *
+ *
+ */
+
+VOID
+STATIC
+CsIntSwap (
+  IN OUT   UINT32 *BaseMaskRegPtr,
+  IN       UINT8 EnChipSels,
+  IN       UINT8 LoBit,
+  IN       UINT8 HiBit
+  )
+{
+  UINT8 BitDelta;
+  UINT32 TempHi;
+  UINT32 TempLo;
+  UINT32 AddrLoMask;
+  UINT32 AddrHiMask;
+
+  ASSERT (BaseMaskRegPtr != NULL);
+  ASSERT (HiBit > LoBit);
+
+  BitDelta = HiBit - LoBit;
+  AddrLoMask = (((UINT32)EnChipSels) - 1) << LoBit;
+  AddrHiMask = AddrLoMask << BitDelta;
+
+  TempHi = TempLo = *BaseMaskRegPtr;
+  TempLo &= AddrLoMask;
+  TempLo <<= BitDelta;     // move lower bits to upper bit position
+  TempHi &= AddrHiMask;
+  TempHi >>= BitDelta;     // move upper bits to lower bit position
+
+  *BaseMaskRegPtr &= ~AddrLoMask;
+  *BaseMaskRegPtr &= ~AddrHiMask;
+  *BaseMaskRegPtr |= TempLo | TempHi;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CSINTLV/mfcsi.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CSINTLV/mfcsi.h
new file mode 100644
index 0000000000..c4c5dff315
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CSINTLV/mfcsi.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfcsi.h
+ *
+ * Memory Controller
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+#ifndef _MFCSI_H_
+#define _MFCSI_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFInterleaveBanks (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MFCSI_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/DMI/mfDMI.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/DMI/mfDMI.c
new file mode 100644
index 0000000000..3138f3f2ec
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/DMI/mfDMI.c
@@ -0,0 +1,623 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfDMI.c
+ *
+ * Memory DMI table support.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 60218 $ @e \$Date: 2011-10-10 23:12:47 -0600 (Mon, 10 Oct 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "cpuServices.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_DMI_MFDMI_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define MAX_DCTS_PER_DIE 2
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemFDMISupport3 (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+BOOLEAN
+MemFDMISupport2 (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *  This function gets DDR3 DMI information from SPD buffer and stores the info into heap
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+BOOLEAN
+MemFDMISupport3 (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8  i;
+  UINT8  Dimm;
+  UINT8  Socket;
+  UINT8  NodeId;
+  UINT8  Dct;
+  UINT8  Channel;
+  UINT8  temp;
+  UINT8  MaxDimms;
+  UINT8  DimmIndex;
+  UINT8  MaxChannelsPerSocket;
+  UINT8  MaxDimmsPerChannel;
+  UINT8  FormFactor;
+  UINT16 TotalWidth;
+  UINT16 Capacity;
+  UINT16 Width;
+  UINT16 Rank;
+  UINT16 BusWidth;
+  UINT64 ManufacturerIdCode;
+  UINT32 MaxSockets;
+  UINT32 Address;
+  UINT32 TotalSize;
+  UINT32 DimmSize;
+  UINT64 AddrValue;
+  INT32  MTB_ps;
+  INT32  FTB_ps;
+  INT32  Value32;
+
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_DATA_STRUCT *MemPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  MEM_DMI_INFO *DmiTable;
+  MEM_PARAMETER_STRUCT *RefPtr;
+
+  DIE_STRUCT *MCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  SPD_DEF_STRUCT *SpdDataStructure;
+
+  NBPtr = MemMainPtr->NBPtr;
+  MemPtr = MemMainPtr->MemPtr;
+  SpdDataStructure = MemPtr->SpdDataStructure;
+  MCTPtr = NBPtr->MCTPtr;
+  RefPtr = MemPtr->ParameterListPtr;
+
+  // Initialize local variables
+  MaxDimms = 0;
+  TotalSize = 0;
+
+  AGESA_TESTPOINT (TpProcMemDmi, &MemPtr->StdHeader);
+
+  ASSERT (NBPtr != NULL);
+
+  MaxSockets = (UINT8) (0x000000FF & GetPlatformNumberOfSockets ());
+  for (Socket = 0; Socket < MaxSockets; Socket++) {
+    for (Channel = 0; Channel < GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader); Channel++) {
+      temp = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel);
+      MaxDimms = MaxDimms + temp;
+    }
+  }
+
+  // Allocate heap for memory DMI table 16, 17, 19, 20
+  AllocHeapParams.RequestedBufferSize = MaxDimms * sizeof (MEM_DMI_INFO) + 6 + sizeof (DMI_T17_MEMORY_TYPE);
+
+  AllocHeapParams.BufferHandle = AMD_DMI_MEM_DEV_INFO_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader)) {
+    PutEventLog (AGESA_CRITICAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader);
+    SetMemError (AGESA_CRITICAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocate heap for memory DMI table 16,17,19 and 20 for DDR3
+    return FALSE;
+  }
+
+  DmiTable = (MEM_DMI_INFO *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 6 + sizeof (DMI_T17_MEMORY_TYPE));
+  *((UINT16 *) (AllocHeapParams.BufferPtr)) = MaxDimms;          // Number of memory devices
+  *((DMI_T17_MEMORY_TYPE *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 6)) = Ddr3MemType;  // Memory type
+
+  //
+  // Gather memory DMI info
+  //
+  DimmIndex = 0;
+  for (Socket = 0; Socket < MaxSockets; Socket++) {
+    MaxChannelsPerSocket = GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader);
+    for (Channel = 0; Channel < MaxChannelsPerSocket; Channel++) {
+      //
+      // Get Node number and Dct number for this channel
+      //
+      ChannelPtr = MemPtr->SocketList[Socket].ChannelPtr[Channel];
+      NodeId = ChannelPtr->MCTPtr->NodeId;
+      Dct = ChannelPtr->Dct;
+      NBPtr[NodeId].SwitchDCT (&NBPtr[NodeId], Dct);
+      MaxDimmsPerChannel = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel);
+      for (Dimm = 0; Dimm < MaxDimmsPerChannel; Dimm++, DimmIndex++) {
+        DmiTable[DimmIndex].TotalWidth = 0xFFFF;
+        DmiTable[DimmIndex].DataWidth = 0xFFFF;
+        DmiTable[DimmIndex].MemorySize = 0;
+        DmiTable[DimmIndex].Speed = 0;
+        DmiTable[DimmIndex].ManufacturerIdCode = 0;
+        DmiTable[DimmIndex].Attributes = 0;
+        DmiTable[DimmIndex].StartingAddr = 0;
+        DmiTable[DimmIndex].EndingAddr = 0;
+        DmiTable[DimmIndex].DimmPresent = 0;
+        DmiTable[DimmIndex].Socket = Socket;
+        DmiTable[DimmIndex].Channel = Channel;
+        DmiTable[DimmIndex].Dimm = Dimm;
+        DmiTable[DimmIndex].ConfigSpeed = 0;
+        DmiTable[DimmIndex].ExtSize = 0;
+        DmiTable[DimmIndex].ExtStartingAddr = 0;
+        DmiTable[DimmIndex].ExtEndingAddr = 0;
+
+        for (i = 0; i < 4; i++) {
+          DmiTable[DimmIndex].SerialNumber[i] = 0xFF;
+        }
+
+        for (i = 0; i < 18; i++) {
+          DmiTable[DimmIndex].PartNumber[i] = 0x0;
+        }
+
+        if (SpdDataStructure[DimmIndex].DimmPresent) {
+          // Total Width (offset 08h) & Data Width (offset 0Ah)
+          TotalWidth = (UINT16) SpdDataStructure[DimmIndex].Data[8];
+          if ((TotalWidth & 0x18) == 0) {
+            // non ECC
+            if ((TotalWidth & 0x07) == 0) {
+              DmiTable[DimmIndex].TotalWidth = 8;           // 8 bits
+            } else if ((TotalWidth & 0x07) == 1) {
+              DmiTable[DimmIndex].TotalWidth  = 16;         // 16 bits
+            } else if ((TotalWidth & 0x07) == 2) {
+              DmiTable[DimmIndex].TotalWidth  = 32;         // 32 bits
+            } else if ((TotalWidth & 0x07) == 3) {
+              DmiTable[DimmIndex].TotalWidth  = 64;         // 64 bits
+            }
+            DmiTable[DimmIndex].DataWidth = DmiTable[DimmIndex].TotalWidth ;
+          } else {
+            // ECC
+            if ((TotalWidth & 0x07) == 0) {
+              DmiTable[DimmIndex].TotalWidth  = 8 + 8;      // 8 bits
+            } else if ((TotalWidth & 0x07) == 1) {
+              DmiTable[DimmIndex].TotalWidth = 16 + 8;      // 16 bits
+            } else if ((TotalWidth & 0x07) == 2) {
+              DmiTable[DimmIndex].TotalWidth  = 32 + 8;     // 32 bits
+            } else if ((TotalWidth & 0x07) == 3) {
+              DmiTable[DimmIndex].TotalWidth  = 64 + 8;     // 64 bits
+            }
+            DmiTable[DimmIndex].DataWidth = DmiTable[DimmIndex].TotalWidth - 8;
+          }
+
+          // Memory Size (offset 0Ch)
+          Capacity = 0;
+          BusWidth = 0;
+          Width = 0;
+          Rank = 0;
+          temp = (UINT8) SpdDataStructure[DimmIndex].Data[4];
+          if ((temp & 0x0F) == 0) {
+            Capacity = 0x0100;                              // 256M
+          } else if ((temp & 0x0F) == 1) {
+            Capacity = 0x0200;                              // 512M
+          } else if ((temp & 0x0F) == 2) {
+            Capacity = 0x0400;                              // 1G
+          } else if ((temp & 0x0F) == 3) {
+            Capacity = 0x0800;                              // 2G
+          } else if ((temp & 0x0F) == 4) {
+            Capacity = 0x1000;                              // 4G
+          } else if ((temp & 0x0F) == 5) {
+            Capacity = 0x2000;                              // 8G
+          } else if ((temp & 0x0F) == 6) {
+            Capacity = 0x4000;                              // 16G
+          }
+
+          temp = (UINT8) SpdDataStructure[DimmIndex].Data[8];
+          if ((temp & 0x07) == 0) {
+            BusWidth = 8;                                   // 8 bits
+          } else if ((temp & 0x07) == 1) {
+            BusWidth = 16;                                  // 16 bits
+          } else if ((temp & 0x07) == 2) {
+            BusWidth = 32;                                  // 32 bits
+          } else if ((temp & 0x07) == 3) {
+            BusWidth = 64;                                  // 64 bits
+          }
+
+          temp = (UINT8) SpdDataStructure[DimmIndex].Data[7];
+          if ((temp & 0x07) == 0) {
+            Width = 4;                                      // 4 bits
+          } else if ((temp & 0x07) == 1) {
+            Width = 8;                                      // 8 bits
+          } else if ((temp & 0x07) == 2) {
+            Width = 16;                                     // 16 bits
+          } else if ((temp & 0x07) == 3) {
+            Width = 32;                                     // 32 bits
+          }
+
+          temp = (UINT8) SpdDataStructure[DimmIndex].Data[7];
+          if (((temp >> 3) & 0x07) == 0) {
+            Rank = 1;                                       // 4 bits
+            DmiTable[DimmIndex].Attributes = 1;             // Single Rank Dimm
+          } else if (((temp >> 3) & 0x07) == 1) {
+            Rank = 2;                                       // 8 bits
+            DmiTable[DimmIndex].Attributes = 2;             // Dual Rank Dimm
+          } else if (((temp >> 3) & 0x07) == 2) {
+            Rank = 3;                                       // 16 bits
+          } else if (((temp >> 3) & 0x07) == 3) {
+            Rank = 4;                                       // 32 bits
+            DmiTable[DimmIndex].Attributes = 4;             // Quad Rank Dimm
+          }
+
+          DimmSize = (UINT32) (Capacity / 8 * BusWidth / Width * Rank);
+          if (DimmSize < 0x7FFF) {
+            DmiTable[DimmIndex].MemorySize = (UINT16) DimmSize;
+          } else {
+            DmiTable[DimmIndex].MemorySize = 0x7FFF;
+            DmiTable[DimmIndex].ExtSize = DimmSize;
+          }
+
+          // Form Factor (offset 0Eh)
+          FormFactor = (UINT8) SpdDataStructure[DimmIndex].Data[3];
+          if ((FormFactor & 0x0F) == 0x01 || (FormFactor & 0x0F) == 0x02) {
+            DmiTable[DimmIndex].FormFactor = 0x09;         // RDIMM or UDIMM
+          } else if ((FormFactor & 0x0F) == 0x03) {
+            DmiTable[DimmIndex].FormFactor = 0x0D;         // SO-DIMM
+          }
+
+          // DIMM Present
+          DmiTable[DimmIndex].DimmPresent = 1;
+
+          // Speed (offset 15h)
+          MTB_ps = ((INT32) SpdDataStructure[DimmIndex].Data[10] * 1000) / SpdDataStructure[DimmIndex].Data[11];
+          FTB_ps = (SpdDataStructure[DimmIndex].Data[9] >> 4) / (SpdDataStructure[DimmIndex].Data[9] & 0xF);
+          Value32 = (MTB_ps * SpdDataStructure[DimmIndex].Data[12]) + (FTB_ps * (INT8) SpdDataStructure[DimmIndex].Data[34]) ;
+          if (Value32 <= 938) {
+            DmiTable[DimmIndex].Speed = 1067;              // DDR3-2133
+          } else if (Value32 <= 1071) {
+            DmiTable[DimmIndex].Speed = 933;               // DDR3-1866
+          } else if (Value32 <= 1250) {
+            DmiTable[DimmIndex].Speed = 800;               // DDR3-1600
+          } else if (Value32 <= 1500) {
+            DmiTable[DimmIndex].Speed = 667;               // DDR3-1333
+          } else if (Value32 <= 1875) {
+            DmiTable[DimmIndex].Speed = 533;               // DDR3-1066
+          } else if (Value32 <= 2500) {
+            DmiTable[DimmIndex].Speed = 400;               // DDR3-800
+          }
+
+          // Manufacturer (offset 17h)
+          ManufacturerIdCode = (UINT64) SpdDataStructure[DimmIndex].Data[118];
+          DmiTable[DimmIndex].ManufacturerIdCode = (ManufacturerIdCode << 8) | ((UINT64) SpdDataStructure[DimmIndex].Data[117]);
+
+          // Serial Number (offset 18h)
+          for (i = 0; i < 4; i++) {
+            DmiTable[DimmIndex].SerialNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 122];
+          }
+          // Part Number (offset 1Ah)
+          for (i = 0; i < 18; i++) {
+            DmiTable[DimmIndex].PartNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 128];
+          }
+
+          // Configured Memory Clock Speed (offset 20h)
+          DmiTable[DimmIndex].ConfigSpeed = NBPtr[NodeId].DCTPtr->Timings.Speed;
+
+          // Starting/Ending Address for each DIMM
+          // If Ending Address >= 0xFFFFFFFF, update Starting Address & Ending Address to 0xFFFFFFFF,
+          // and use the Extended Starting Address & Extended Ending Address instead.
+          if ((NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm) & 1) != 0) {
+            Address = (NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm)) & NBPtr->CsRegMsk;
+            Address = (Address & 0xFFFF0000) >> 2;
+            DmiTable[DimmIndex].StartingAddr = Address;
+            if (RefPtr->EnableBankIntlv && !NBPtr[NodeId].MCTPtr->DctData[Dct].BkIntDis) {
+              AddrValue = (UINT64) Address + ((UINT64) ((NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSMask0Reg + Dimm) & 0xFFFF0000) + 0x00080000) >> 2) - 1;
+              if (AddrValue >= (UINT64) 0xFFFFFFFF) {
+                DmiTable[DimmIndex].StartingAddr = 0xFFFFFFFF;
+                DmiTable[DimmIndex].EndingAddr = 0xFFFFFFFF;
+                DmiTable[DimmIndex].ExtStartingAddr = (UINT64) Address;
+                DmiTable[DimmIndex].ExtEndingAddr = AddrValue;
+              } else {
+                DmiTable[DimmIndex].EndingAddr = (UINT32) AddrValue;
+              }
+            } else {
+              AddrValue = (UINT64) Address + (UINT64) (DmiTable[DimmIndex].MemorySize * 0x0400) - 1;
+              if (AddrValue >= (UINT64) 0xFFFFFFFF) {
+                DmiTable[DimmIndex].StartingAddr = 0xFFFFFFFF;
+                DmiTable[DimmIndex].EndingAddr = 0xFFFFFFFF;
+                DmiTable[DimmIndex].ExtStartingAddr = (UINT64) Address;
+                DmiTable[DimmIndex].ExtEndingAddr = AddrValue;
+              } else {
+                DmiTable[DimmIndex].EndingAddr = (UINT32) AddrValue;
+              }
+            }
+          }
+        }  // Dimm present
+        TotalSize += (UINT32) DmiTable[DimmIndex].MemorySize;
+      }    // Dimm loop
+    }      // Channel loop
+  }          // Socket loop
+
+  *((UINT32 *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 2)) = TotalSize;      // Max Capacity
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *  This function gets DDR2 DMI information from SPD buffer and stores the info into heap
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+BOOLEAN
+MemFDMISupport2 (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8  i;
+  UINT8  Dimm;
+  UINT8  Socket;
+  UINT8  NodeId;
+  UINT8  Dct;
+  UINT8  Channel;
+  UINT8  temp;
+  UINT8  MaxDimms;
+  UINT8  DimmIndex;
+  UINT8  MaxChannelsPerSocket;
+  UINT8  MaxDimmsPerChannel;
+  UINT8  FormFactor;
+  UINT8  Temp;
+  UINT8  Rank;
+  UINT16 TotalWidth;
+  UINT32 Speed;
+  UINT32 MaxSockets;
+  UINT32 Address;
+
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_DATA_STRUCT *MemPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  MEM_DMI_INFO *DmiTable;
+  DIE_STRUCT *MCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  SPD_DEF_STRUCT *SpdDataStructure;
+  MEM_PARAMETER_STRUCT *RefPtr;
+
+  NBPtr = MemMainPtr->NBPtr;
+  MemPtr = MemMainPtr->MemPtr;
+  SpdDataStructure = MemPtr->SpdDataStructure;
+  MCTPtr = NBPtr->MCTPtr;
+  RefPtr = MemPtr->ParameterListPtr;
+
+  // Initialize local variables
+  MaxDimms = 0;
+
+  ASSERT (NBPtr != NULL);
+
+  MaxSockets = (UINT8) (0x000000FF & GetPlatformNumberOfSockets ());
+  for (Socket = 0; Socket < MaxSockets; Socket++) {
+    for (Channel = 0; Channel < GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader); Channel++) {
+      temp = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel);
+      MaxDimms = MaxDimms + temp;
+    }
+  }
+
+  // Allocate heap for memory DMI table 16, 17, 19, 20
+  AllocHeapParams.RequestedBufferSize = MaxDimms * sizeof (MEM_DMI_INFO) + 3;
+
+  AllocHeapParams.BufferHandle = AMD_DMI_MEM_DEV_INFO_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader)) {
+    PutEventLog (AGESA_CRITICAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader);
+    SetMemError (AGESA_CRITICAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocate heap for memory DMI table 16,17,19 and 20 for DDR2
+    return FALSE;
+  }
+
+  DmiTable = (MEM_DMI_INFO *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 2 + sizeof (DMI_T17_MEMORY_TYPE));
+  *((UINT16 *) (AllocHeapParams.BufferPtr)) = MaxDimms;          // Number of memory devices
+  *((DMI_T17_MEMORY_TYPE *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 2)) = Ddr2MemType;  // Memory type
+
+  //
+  // DMI TYPE 17
+  //
+  DimmIndex = 0;
+  for (Socket = 0; Socket < MaxSockets; Socket++) {
+    MaxChannelsPerSocket = GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader);
+    for (Channel = 0; Channel < MaxChannelsPerSocket; Channel++) {
+      //
+      // Get Node number and Dct number for this channel
+      //
+      ChannelPtr = MemPtr->SocketList[Socket].ChannelPtr[Channel];
+      NodeId = ChannelPtr->MCTPtr->NodeId;
+      Dct = ChannelPtr->Dct;
+      NBPtr[NodeId].SwitchDCT (&NBPtr[NodeId], Dct);
+      NBPtr[NodeId].SwitchDCT (&NBPtr[NodeId], Dct);
+      MaxDimmsPerChannel = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel);
+      for (Dimm = 0; Dimm < MaxDimmsPerChannel; Dimm++, DimmIndex++) {
+        DmiTable[DimmIndex].TotalWidth = 0xFFFF;
+        DmiTable[DimmIndex].DataWidth = 0xFFFF;
+        DmiTable[DimmIndex].MemorySize = 0xFFFF;
+        DmiTable[DimmIndex].Speed = 0;
+        DmiTable[DimmIndex].ManufacturerIdCode = 0;
+        DmiTable[DimmIndex].Attributes = 0;
+        DmiTable[DimmIndex].StartingAddr = 0xFFFFFFFF;
+        DmiTable[DimmIndex].EndingAddr = 0xFFFFFFFF;
+        DmiTable[DimmIndex].DimmPresent = 0;
+        DmiTable[DimmIndex].ConfigSpeed = 0;
+
+        for (i = 0; i < 4; i++) {
+          DmiTable[DimmIndex].SerialNumber[i] = 0xFF;
+        }
+
+        for (i = 0; i < 18; i++) {
+          DmiTable[DimmIndex].PartNumber[i] = 0x0;
+        }
+
+        if (SpdDataStructure[DimmIndex].DimmPresent) {
+          // Total Width (offset 08h) & Data Width (offset 0Ah)
+          TotalWidth = (UINT16) SpdDataStructure[DimmIndex].Data[13];
+          if ((TotalWidth & 0x04) != 0) {
+            DmiTable[DimmIndex].TotalWidth = 4;          // 4 bits
+          } else if ((TotalWidth & 0x08) != 0) {
+            DmiTable[DimmIndex].TotalWidth = 8;          // 8 bits
+          } else if ((TotalWidth & 0x10) != 0) {
+            DmiTable[DimmIndex].TotalWidth = 16;         // 16 bits
+          } else if ((TotalWidth & 0x20) != 0) {
+            DmiTable[DimmIndex].TotalWidth = 32;         // 32 bits
+          }
+          DmiTable[DimmIndex].DataWidth = DmiTable[DimmIndex].TotalWidth;
+
+          // Memory Size (offset 0Ch), Attributes (offset 1Bh)
+          Rank = (UINT8) SpdDataStructure[DimmIndex].Data[5] & 0x07;
+          if (Rank == 0) {
+            DmiTable[DimmIndex].Attributes = 1;          // Single Rank Dimm
+          } else if (Rank == 1) {
+            DmiTable[DimmIndex].Attributes = 2;          // Dual Rank Dimm
+          } else if (Rank == 3) {
+            DmiTable[DimmIndex].Attributes = 4;          // Quad Rank Dimm
+          }
+
+          Temp = (UINT8) SpdDataStructure[DimmIndex].Data[31];
+          for (i = 0; i < 8; i++) {
+            if ((Temp & 0x01) == 1) {
+              DmiTable[DimmIndex].MemorySize = 0x80 * (i + 1) * (Rank + 1);
+            }
+            Temp = Temp >> 1;
+          }
+
+          // Form Factor (offset 0Eh)
+          FormFactor = (UINT8) SpdDataStructure[DimmIndex].Data[20];
+          if ((FormFactor & 0x04) == 4) {
+            DmiTable[DimmIndex].FormFactor = 0x0D;       // SO-DIMM
+          } else {
+            DmiTable[DimmIndex].FormFactor = 0x09;       // RDIMM or UDIMM
+          }
+
+          // DIMM Present
+          DmiTable[DimmIndex].DimmPresent = 1;
+
+          // DIMM Index
+          DmiTable[DimmIndex].Socket = Socket;
+          DmiTable[DimmIndex].Channel = Channel;
+          DmiTable[DimmIndex].Dimm = Dimm;
+
+          // Speed (offset 15h)
+          Speed = NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFDramConfigHiReg);
+          Speed = Speed & 0x00000007;
+          if (Speed == 0) {
+            DmiTable[DimmIndex].Speed = 400;              // 400MHz
+          } else if (Speed == 1) {
+            DmiTable[DimmIndex].Speed = 533;              // 533MHz
+          } else if (Speed == 2) {
+            DmiTable[DimmIndex].Speed = 667;              // 667MHz
+          } else if (Speed == 3) {
+            DmiTable[DimmIndex].Speed = 800;              // 800MHz
+          }
+
+          // Manufacturer (offset 17h)
+          DmiTable[DimmIndex].ManufacturerIdCode = (UINT64) SpdDataStructure[DimmIndex].Data[64];
+
+          // Serial Number (offset 18h)
+          for (i = 0; i < 4; i++) {
+            DmiTable[DimmIndex].SerialNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 95];
+          }
+
+          // Part Number (offset 1Ah)
+          for (i = 0; i < 18; i++) {
+            DmiTable[DimmIndex].PartNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 73];
+          }
+
+          // Configured Memory Clock Speed (offset 20h)
+          DmiTable[DimmIndex].ConfigSpeed = NBPtr[NodeId].DCTPtr->Timings.Speed;
+
+          // AGESA does NOT support this feature when bank interleaving is enabled.
+          if (!RefPtr->EnableBankIntlv) {
+            if ((NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm) & 1) != 0) {
+              Address = (NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm)) & NBPtr->CsRegMsk;
+              Address = Address >> 2;
+              DmiTable[DimmIndex].StartingAddr = Address;
+              DmiTable[DimmIndex].EndingAddr = Address + (UINT32) (DmiTable[DimmIndex].MemorySize * 0x0400);
+            }
+          }
+
+        }        // DIMM Present
+      }          // DIMM loop
+    }
+  }
+
+  return TRUE;
+}
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ECC/mfecc.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ECC/mfecc.c
new file mode 100644
index 0000000000..cf4e32960e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ECC/mfecc.c
@@ -0,0 +1,290 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfecc.c
+ *
+ * Feature ECC initialization functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/ECC)
+ * @e \$Revision: 54543 $ @e \$Date: 2011-06-08 23:19:25 -0600 (Wed, 08 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mfecc.h"
+#include "Filecode.h"
+#include "mfmemclr.h"
+#include "GeneralServices.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_ECC_MFECC_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+InitECCOverriedeStruct (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   ECC_OVERRIDE_STRUCT *pecc_override_struct
+  );
+
+BOOLEAN
+MemFCheckECC (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function checks to see if ECC can be enabled on all nodes
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFCheckECC (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  DIE_STRUCT *MCTPtr;
+  MEM_SHARED_DATA *SharedPtr;
+  BOOLEAN ErrorRecovery;
+
+  ASSERT (NBPtr != NULL);
+
+  MCTPtr = NBPtr->MCTPtr;
+  SharedPtr = NBPtr->SharedPtr;
+
+  ErrorRecovery = TRUE;
+  IDS_OPTION_HOOK (IDS_MEM_ERROR_RECOVERY, &ErrorRecovery, &NBPtr->MemPtr->StdHeader);
+
+  if (MCTPtr->NodeMemSize != 0) {
+    if (SharedPtr->AllECC && MCTPtr->Status[SbEccDimms] && (ErrorRecovery || (MCTPtr->ErrCode < AGESA_ERROR))) {
+      // Clear all MCA reports before using scrubber
+      // to initialize ECC check bits
+      //
+      NBPtr->McaNbCtlReg = NBPtr->GetBitField (NBPtr, BFMcaNbCtlReg);
+      NBPtr->SetBitField (NBPtr, BFMcaNbCtlReg, 0);
+      NBPtr->SetBitField (NBPtr, BFSyncOnUcEccEn, 0);
+      // In unganged mode, set DctDctIntlv
+      if (!NBPtr->Ganged) {
+        NBPtr->SetBitField (NBPtr, BFDctDatIntLv, 1);
+      }
+      //
+      // Set Ecc Symbol Size
+      //
+      NBPtr->SetEccSymbolSize (NBPtr);
+      // If ECC can be enabled on this node,
+      // set the master ECCen bit (according to setup)
+      //
+      NBPtr->SetBitField (NBPtr, BFDramEccEn, 1);
+      // Do mem clear on current node
+      MemFMctMemClr_Init (NBPtr);
+      return TRUE;
+    } else {
+      if (SharedPtr->AllECC) {
+        SharedPtr->AllECC = FALSE;
+      }
+      // ECC requested but cannot be enabled
+      MCTPtr->Status[SbEccDimms] = FALSE;
+      MCTPtr->ErrStatus[EsbDramECCDis] = TRUE;
+      PutEventLog (AGESA_WARNING, MEM_WARNING_ECC_DIS, NBPtr->Node, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_WARNING, MCTPtr);
+    }
+  }
+  return FALSE;
+}
+
+  /* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function initializes the ECC on all nodes
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFInitECC (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Node;
+  UINT32 ScrubAddrRJ16;
+  DIE_STRUCT *MCTPtr;
+  MEM_SHARED_DATA *SharedPtr;
+  ECC_OVERRIDE_STRUCT  ecc_override_struct;
+  BOOLEAN Flag;
+
+  InitECCOverriedeStruct (NBPtr, &ecc_override_struct);
+  IDS_OPTION_HOOK (IDS_ECC, &ecc_override_struct, &(NBPtr->MemPtr->StdHeader));
+
+  ASSERT (NBPtr != NULL);
+
+  MCTPtr = NBPtr->MCTPtr;
+  Node = MCTPtr->NodeId;
+  SharedPtr = NBPtr->SharedPtr;
+  Flag = TRUE;
+
+  NBPtr->FamilySpecificHook[ScrubberErratum] (NBPtr, (VOID *) &Flag);
+
+  if ((MCTPtr->Status[SbEccDimms]) && (SharedPtr->AllECC)) {
+    // Check if the input dram scrub rate is supported or not
+    ASSERT (ecc_override_struct.CfgScrubDramRate <= 0x16);
+    if (ecc_override_struct.CfgScrubDramRate != 0) {
+    // Program scrub address,
+    // let the scrub Addr be the Base of this Node
+    // Only enable Dram scrubber when there is memory on current node
+    //
+      NBPtr->SetBitField (NBPtr, BFScrubReDirEn, 0);
+      ScrubAddrRJ16 = (NBPtr->GetBitField (NBPtr, BFDramBaseReg0 + Node) & 0xFFFF0000) >> 8;
+      ScrubAddrRJ16 |= NBPtr->GetBitField (NBPtr, BFDramBaseHiReg0 + Node) << 24;
+      NBPtr->SetBitField (NBPtr, BFScrubAddrLoReg, ScrubAddrRJ16 << 16);
+      NBPtr->SetBitField (NBPtr, BFScrubAddrHiReg, ScrubAddrRJ16 >> 16);
+      NBPtr->SetBitField (NBPtr, BFDramScrub, ecc_override_struct.CfgScrubDramRate);
+    }
+  }
+  // Scrub CTL for Dcache, L2, L3
+  // Check if the input L2 scrub rate is supported or not
+  ASSERT (ecc_override_struct.CfgScrubL2Rate <= 0x16);
+  NBPtr->SetBitField (NBPtr, BFL2Scrub, ecc_override_struct.CfgScrubL2Rate);
+  // Check if the input Dcache scrub rate is supported or not
+  ASSERT (ecc_override_struct.CfgScrubDcRate <= 0x16);
+  NBPtr->SetBitField (NBPtr, BFDcacheScrub, ecc_override_struct.CfgScrubDcRate);
+  // Do not enable L3 Scrub if F3xE8[L3Capable] is 0 or F3x188[BFReserved00B] is 1
+  if ((NBPtr->GetBitField (NBPtr, BFL3Capable) == 1) && (NBPtr->GetBitField (NBPtr, BFReserved00B) == 0)) {
+    // Check if input L3 scrub rate is supported or not
+    ASSERT (ecc_override_struct.CfgScrubL3Rate <= 0x16);
+    NBPtr->SetBitField (NBPtr, BFL3Scrub, ecc_override_struct.CfgScrubL3Rate);
+  }
+
+  // Check if Dcache scrubber or L2 scrubber is enabled
+  if ((ecc_override_struct.CfgScrubL2Rate != 0) || (ecc_override_struct.CfgScrubDcRate!= 0)) {
+    // If ClkDivisor is deeper than divide-by-16
+    if (NBPtr->GetBitField (NBPtr, BFC1ClkDivisor) > 4) {
+      // Set it to divide-by-16
+      NBPtr->SetBitField (NBPtr, BFC1ClkDivisor, 4);
+    }
+  }
+
+  NBPtr->SetBitField (NBPtr, BFScrubReDirEn, ecc_override_struct.CfgEccRedirection);
+  NBPtr->SetBitField (NBPtr, BFSyncOnUcEccEn, ecc_override_struct.CfgEccSyncFlood);
+  // Restore MCA reports after scrubber is done
+  // with initializing ECC check bits
+  NBPtr->SetBitField (NBPtr, BFMcaNbCtlReg, NBPtr->McaNbCtlReg);
+
+  Flag = FALSE;
+  NBPtr->FamilySpecificHook[ScrubberErratum] (NBPtr, (VOID *) &Flag);
+
+  return TRUE;
+}
+
+VOID
+STATIC
+InitECCOverriedeStruct (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   ECC_OVERRIDE_STRUCT *pecc_override_struct
+  )
+{
+  //
+  // If (D18F3x44[DramEccEn]==1) THEN 1 ELSE 0 ENDIF
+  //
+  if (NBPtr->GetBitField (NBPtr, BFDramEccEn) == 1) {
+    pecc_override_struct->CfgEccRedirection = 1;
+  } else {
+    pecc_override_struct->CfgEccRedirection = 0;
+  }
+
+  pecc_override_struct->CfgEccSyncFlood = UserOptions.CfgEccSyncFlood;
+  pecc_override_struct->CfgScrubDcRate = UserOptions.CfgScrubDcRate;
+
+  if (UserOptions.CfgScrubDramRate != 0xFF) {
+    pecc_override_struct->CfgScrubDramRate = UserOptions.CfgScrubDramRate;
+  } else {
+    if (NBPtr->MCTPtr->NodeMemSize <= 0x4000) {
+      pecc_override_struct->CfgScrubDramRate = 0x12; // 1 ~ 1 GB
+    } else if (NBPtr->MCTPtr->NodeMemSize <= 0x8000) {
+      pecc_override_struct->CfgScrubDramRate = 0x11; // 1 GB + 1 ~ 2 GB
+    } else if (NBPtr->MCTPtr->NodeMemSize <= 0x10000) {
+      pecc_override_struct->CfgScrubDramRate = 0x10; // 2 GB + 1 ~ 4 GB
+    } else if (NBPtr->MCTPtr->NodeMemSize <= 0x20000) {
+      pecc_override_struct->CfgScrubDramRate = 0x0F; // 4 GB + 1 ~ 8 GB
+    } else if (NBPtr->MCTPtr->NodeMemSize <= 0x40000) {
+      pecc_override_struct->CfgScrubDramRate = 0x0E; // 8 GB + 1 ~ 16 GB
+    } else {
+      pecc_override_struct->CfgScrubDramRate = 0x0D; //16 GB + 1 above
+    }
+  }
+
+  pecc_override_struct->CfgScrubL2Rate = UserOptions.CfgScrubL2Rate;
+  pecc_override_struct->CfgScrubL3Rate = UserOptions.CfgScrubL3Rate;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ECC/mfecc.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ECC/mfecc.h
new file mode 100644
index 0000000000..8895d512c2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ECC/mfecc.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfecc.h
+ *
+ * Feature ECC initialization functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+#ifndef _MFECC_H_
+#define _MFECC_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFInitECC (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MFECC_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ECC/mfemp.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ECC/mfemp.c
new file mode 100644
index 0000000000..aa12d444ac
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ECC/mfemp.c
@@ -0,0 +1,178 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfemp.c
+ *
+ * Feature EMP initialization functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/ECC)
+ * @e \$Revision: 53955 $ @e \$Date: 2011-05-29 20:54:54 -0600 (Sun, 29 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_ECC_MFEMP_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+IsPowerOfTwo (
+  IN       UINT32 TestNumber
+  );
+
+BOOLEAN
+MemFInitEMP (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function initializes EMP (Enhanced Memory Protection)
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFInitEMP (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_PARAMETER_STRUCT *RefPtr;
+  DIE_STRUCT *MCTPtr;
+
+  ASSERT (NBPtr != NULL);
+
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  if (RefPtr->EnableEccFeature) {
+    if (NBPtr->GetBitField (NBPtr, BFEnhMemProtCap) == 0) {
+      PutEventLog (AGESA_WARNING, MEM_WARNING_EMP_NOT_SUPPORTED, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+      MCTPtr->ErrStatus[EsbEMPNotSupported] = TRUE;
+    } else if (RefPtr->EnableChannelIntlv || RefPtr->EnableBankIntlv || RefPtr->EnableBankSwizzle) {
+      PutEventLog (AGESA_WARNING, MEM_WARNING_EMP_CONFLICT, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+      MCTPtr->ErrStatus[EsbEMPConflict] = TRUE;
+    } else if ((!MCTPtr->GangedMode) &&
+               (!IsPowerOfTwo (MCTPtr->DctData[0].Timings.DctMemSize) &&
+                !IsPowerOfTwo (MCTPtr->DctData[1].Timings.DctMemSize))) {
+      PutEventLog (AGESA_WARNING, MEM_WARNING_EMP_NOT_ENABLED, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+      MCTPtr->ErrStatus[EsbEMPDis] = TRUE;
+    } else {
+      // Reduce memory size to 7/8 of the original memory size
+      ASSERT ((MCTPtr->NodeMemSize % 8) == 0);
+      NBPtr->SetBitField (NBPtr, BFDramHoleValid, 0);
+      MCTPtr->NodeMemSize = (MCTPtr->NodeMemSize / 8) * 7;
+      NBPtr->HtMemMapInit (NBPtr);
+      NBPtr->CpuMemTyping (NBPtr);
+
+      // Enable EMP
+      NBPtr->SetBitField (NBPtr, BFDramEccEn, 1);
+
+      // Scrub CTL settings for Dcache, L2
+      NBPtr->SetBitField (NBPtr, BFL2Scrub, UserOptions.CfgScrubL2Rate);
+      NBPtr->SetBitField (NBPtr, BFDcacheScrub, UserOptions.CfgScrubDcRate);
+
+      NBPtr->SetBitField (NBPtr, BFSyncOnUcEccEn, UserOptions.CfgEccSyncFlood);
+      return TRUE;
+    }
+  }
+  return FALSE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function checks to see if the input is power of two.
+ *
+ *     @param[in]    TestNumber  - Value to check for power of two
+ *
+ *     @return          TRUE     - is power of two
+ *                      FALSE    - is not power of two
+ */
+BOOLEAN
+STATIC
+IsPowerOfTwo (
+  IN       UINT32 TestNumber
+  )
+{
+  return (BOOLEAN) ((TestNumber & (TestNumber - 1)) == 0);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/EXCLUDIMM/mfdimmexclud.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/EXCLUDIMM/mfdimmexclud.c
new file mode 100644
index 0000000000..023a0c16b0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/EXCLUDIMM/mfdimmexclud.c
@@ -0,0 +1,207 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfdimmexclud.c
+ *
+ * Feature DIMM exclude.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/EXCLUDIMM)
+ * @e \$Revision: 55966 $ @e \$Date: 2011-07-05 10:03:59 -0600 (Tue, 05 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_EXCLUDIMM_MFDIMMEXCLUD_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemFRASExcludeDIMM (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Check and disable Chip selects that fail training for each node.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+BOOLEAN
+MemFRASExcludeDIMM (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 ReserveDCT;
+  UINT8 q;
+  BOOLEAN Flag;
+  BOOLEAN IsCSIntlvEnabled;
+  UINT16 CsTestFail;
+  DIE_STRUCT *MCTPtr;
+  BOOLEAN RetVal;
+
+  ASSERT (NBPtr != NULL);
+  ReserveDCT = NBPtr->Dct;
+  CsTestFail = 0;
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.CsTestFail != 0) {
+      // When there is no new failed dimm that needs to be excluded, then no need to go through the process.
+      switch (NBPtr->SharedPtr->DimmExcludeFlag) {
+      case NORMAL:
+        // See there is new dimm that needs to be excluded
+        if ((NBPtr->DCTPtr->Timings.CsTestFail & NBPtr->DCTPtr->Timings.CsEnabled) != 0) {
+          CsTestFail |= NBPtr->DCTPtr->Timings.CsTestFail;
+        }
+        break;
+      case TRAINING:
+        // Do not do any dimm excluding during training
+        // Dimm exclude will be done at the end of training
+        break;
+      case END_TRAINING:
+        // Exclude all dimms that have failures during training
+        if ((NBPtr->DCTPtr->Timings.CsTrainFail != 0) ||
+            ((NBPtr->DCTPtr->Timings.CsTestFail & NBPtr->DCTPtr->Timings.CsEnabled) != 0)) {
+          CsTestFail |= NBPtr->DCTPtr->Timings.CsTestFail;
+        }
+        break;
+      default:
+        IDS_ERROR_TRAP;
+      }
+    }
+  }
+
+  if (CsTestFail != 0) {
+    IsCSIntlvEnabled = FALSE;
+    MCTPtr = NBPtr->MCTPtr;
+    MCTPtr->NodeMemSize = 0;
+    NBPtr->SharedPtr->NodeMap[NBPtr->Node].IsValid = FALSE;
+    NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysBase = 0;
+    NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysLimit = 0;
+    NBPtr->SetBitField (NBPtr, BFDramBaseAddr, 0);
+    NBPtr->SetBitField (NBPtr, BFDramLimitAddr, 0);
+
+    if (MCTPtr->GangedMode) {
+      // if ganged mode, disable all pairs of CS that fail.
+      NBPtr->DCTPtr->Timings.CsTestFail |= CsTestFail;
+    }
+
+    // if chip select interleaving has been enabled, need to undo it before remapping memory
+    if (NBPtr->FeatPtr->UndoInterleaveBanks (NBPtr)) {
+      IsCSIntlvEnabled = TRUE;
+    }
+
+    Flag = TRUE;
+    NBPtr->FamilySpecificHook[BfAfExcludeDimm] (NBPtr, &Flag);
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      if (!MCTPtr->GangedMode || (MCTPtr->Dct == 0)) {
+        if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+          NBPtr->DCTPtr->Timings.DctMemSize = 0;
+
+          NBPtr->DCTPtr->Timings.CsEnabled = 0;
+          for (q = 0; q < MAX_CS_PER_CHANNEL; q++) {
+            NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + q, 0);
+          }
+
+          // Set F2x94[DisDramInterface] = 1 if all chip selects fail training on the DCT
+          if ((NBPtr->DCTPtr->Timings.CsPresent & ~NBPtr->DCTPtr->Timings.CsTestFail) == 0) {
+            NBPtr->DisableDCT (NBPtr);
+          }
+
+          Flag = NBPtr->StitchMemory (NBPtr);
+          ASSERT (Flag == TRUE);
+        }
+      }
+    }
+    Flag = FALSE;
+    NBPtr->FamilySpecificHook[BfAfExcludeDimm] (NBPtr, &Flag);
+
+    // Re-enable chip select interleaving when remapping is done.
+    if (IsCSIntlvEnabled) {
+      NBPtr->FeatPtr->InterleaveBanks (NBPtr);
+    }
+
+    RetVal = TRUE;
+  } else {
+    RetVal = FALSE;
+  }
+  NBPtr->SwitchDCT (NBPtr, ReserveDCT);
+  return RetVal;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/IDENDIMM/mfidendimm.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/IDENDIMM/mfidendimm.c
new file mode 100644
index 0000000000..f16f010f79
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/IDENDIMM/mfidendimm.c
@@ -0,0 +1,549 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfidendimm.c
+ *
+ * Translate physical system address to dimm identification.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat)
+ * @e \$Revision: 51077 $ @e \$Date: 2011-04-18 15:53:51 -0600 (Mon, 18 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "heapManager.h"
+#include "mfidendimm.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_IDENDIMM_MFIDENDIMM_FILECODE
+extern MEM_NB_SUPPORT memNBInstalled[];
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DCTS_PER_DIE        2   ///< Max DCTs per die
+#define MAX_CHLS_PER_DCT        1   ///< Max Channels per DCT
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+STATIC
+MemFTransSysAddrToCS (
+  IN OUT   AMD_IDENTIFY_DIMM *AmdDimmIdentify,
+  IN       MEM_MAIN_DATA_BLOCK *mmPtr
+  );
+
+UINT32
+STATIC
+MemFGetPCI (
+  IN   MEM_NB_BLOCK *NBPtr,
+  IN   UINT8 NodeID,
+  IN   UINT8 DctNum,
+  IN   BIT_FIELD_NAME BitFieldName
+  );
+
+UINT8
+STATIC
+MemFUnaryXOR (
+  IN   UINT32 address
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------*/
+/**
+*
+*   This function identifies the dimm on which the given memory address locates.
+*
+*   @param[in, out]   *AmdDimmIdentify - Pointer to the parameter structure AMD_IDENTIFY_DIMM
+*
+*   @retval           AGESA_SUCCESS - Successfully translate physical system address
+*                                     to dimm identification.
+*                     AGESA_BOUNDS_CHK - Targeted address is out of bound.
+*
+*/
+
+AGESA_STATUS
+AmdIdentifyDimm (
+  IN OUT   AMD_IDENTIFY_DIMM *AmdDimmIdentify
+  )
+{
+  UINT8 i;
+  AGESA_STATUS RetVal;
+  MEM_MAIN_DATA_BLOCK mmData;             // Main Data block
+  MEM_NB_BLOCK *NBPtr;
+  MEM_DATA_STRUCT MemData;
+  LOCATE_HEAP_PTR LocHeap;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  UINT8 Node;
+  UINT8 Dct;
+  UINT8 Die;
+  UINT8 DieCount;
+
+  LibAmdMemCopy (&(MemData.StdHeader), &(AmdDimmIdentify->StdHeader), sizeof (AMD_CONFIG_PARAMS), &(AmdDimmIdentify->StdHeader));
+  mmData.MemPtr = &MemData;
+  RetVal = MemSocketScan (&mmData);
+  if (RetVal == AGESA_FATAL) {
+    return RetVal;
+  }
+  DieCount = mmData.DieCount;
+
+  // Search for AMD_MEM_AUTO_HANDLE on the heap first.
+  // Only apply for space on the heap if cannot find AMD_MEM_AUTO_HANDLE on the heap.
+  LocHeap.BufferHandle = AMD_MEM_AUTO_HANDLE;
+  if (HeapLocateBuffer (&LocHeap, &AmdDimmIdentify->StdHeader) == AGESA_SUCCESS) {
+    // NB block has already been constructed by main block.
+    // No need to construct it here.
+    NBPtr = (MEM_NB_BLOCK *)LocHeap.BufferPtr;
+    mmData.NBPtr = NBPtr;
+  } else {
+    AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (MEM_NB_BLOCK)));
+    AllocHeapParams.BufferHandle = AMD_MEM_AUTO_HANDLE;
+    AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+    if (HeapAllocateBuffer (&AllocHeapParams, &AmdDimmIdentify->StdHeader) != AGESA_SUCCESS) {
+      PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK, 0, 0, 0, 0, &AmdDimmIdentify->StdHeader);
+      ASSERT(FALSE); // Could not allocate heap space for NB block for Identify DIMM
+      return AGESA_FATAL;
+    }
+    NBPtr = (MEM_NB_BLOCK *)AllocHeapParams.BufferPtr;
+    mmData.NBPtr = NBPtr;
+    // Construct each die.
+    for (Die = 0; Die < DieCount; Die ++) {
+      i = 0;
+      while (memNBInstalled[i].MemIdentifyDimmConstruct != 0) {
+        if (memNBInstalled[i].MemIdentifyDimmConstruct (&NBPtr[Die], &MemData, Die)) {
+          break;
+        }
+        i++;
+      };
+      if (memNBInstalled[i].MemIdentifyDimmConstruct == 0) {
+        PutEventLog (AGESA_FATAL, MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM, Die, 0, 0, 0, &AmdDimmIdentify->StdHeader);
+        ASSERT(FALSE); // No Identify DIMM constructor found
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  if ((RetVal = MemFTransSysAddrToCS (AmdDimmIdentify, &mmData)) == AGESA_SUCCESS) {
+    // Translate Node, DCT and Chip select number to Socket, Channel and Dimm number.
+    Node = AmdDimmIdentify->SocketId;
+    Dct = AmdDimmIdentify->MemChannelId;
+    AmdDimmIdentify->SocketId = MemData.DiesPerSystem[Node].SocketId;
+    AmdDimmIdentify->MemChannelId = NBPtr[Node].GetSocketRelativeChannel (&NBPtr[Node], Dct, 0);
+    AmdDimmIdentify->DimmId /= 2;
+  }
+
+  return RetVal;
+}
+
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------*/
+/**
+*
+*   This function translates the given physical system address to
+*   a node, channel select, chip select, bank, row, and column address.
+*
+*   @param[in, out]   *AmdDimmIdentify - Pointer to the parameter structure AMD_IDENTIFY_DIMM
+*   @param[in, out]   *mmPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+*
+*   @retval           AGESA_SUCCESS - The chip select address is found
+*   @retval           AGESA_BOUNDS_CHK - Targeted address is out of bound.
+*
+*/
+AGESA_STATUS
+STATIC
+MemFTransSysAddrToCS (
+  IN OUT   AMD_IDENTIFY_DIMM *AmdDimmIdentify,
+  IN       MEM_MAIN_DATA_BLOCK *mmPtr
+  )
+{
+  BOOLEAN CSFound;
+  BOOLEAN DctSelHiRngEn;
+  BOOLEAN DctSelIntLvEn;
+  BOOLEAN DctGangEn;
+  BOOLEAN HiRangeSelected;
+  BOOLEAN DramHoleValid;
+  BOOLEAN CSEn;
+  BOOLEAN SwapDone;
+  BOOLEAN IntLvRgnSwapEn;
+  UINT8 DctSelHi;
+  UINT8 DramEn;
+  UINT8 range;
+  UINT8 IntlvEn;
+  UINT8 IntlvSel;
+  UINT8 ILog;
+  UINT8 DctSelIntLvAddr;
+  UINT8 DctNum;
+  UINT8 cs;
+  UINT8 BadDramCs;
+  UINT8 spare;
+  UINT8 IntLvRgnBaseAddr;
+  UINT8 IntLvRgnLmtAddr;
+  UINT8 IntLvRgnSize;
+  UINT32 temp;
+  UINT32 DramHoleOffset;
+  UINT32 DramHoleBase;
+  UINT64 DramBase;
+  UINT64 DramLimit;
+  UINT64 DramLimitSysAddr;
+  UINT64 DctSelBaseAddr;
+  UINT64 DctSelBaseOffset;
+  UINT64 ChannelAddr;
+  UINT64 CSBase;
+  UINT64 CSMask;
+  UINT64 InputAddr;
+  UINT64 ChannelOffset;
+  MEM_NB_BLOCK *NBPtr;
+  UINT8 Die;
+
+  UINT64 SysAddr;
+  UINT8 *NodeID;
+  UINT8 *ChannelSelect;
+  UINT8 *ChipSelect;
+
+  SysAddr = AmdDimmIdentify->MemoryAddress;
+  NodeID = &(AmdDimmIdentify->SocketId);
+  ChannelSelect = &(AmdDimmIdentify->MemChannelId);
+  ChipSelect = &(AmdDimmIdentify->DimmId);
+  CSFound = FALSE;
+  ILog = 0;
+  NBPtr = mmPtr->NBPtr;
+
+  NBPtr->FamilySpecificHook[FixupSysAddr] (NBPtr, &SysAddr);
+
+  // Loop to determine the dram range
+  for (Die = 0; Die < mmPtr->DieCount; Die ++) {
+    range = NBPtr[Die].Node;
+
+    // DRAM Base
+    temp = MemFGetPCI (NBPtr, 0, 0, BFDramBaseReg0 + range);
+    DramEn = (UINT8) (temp & 0x3);
+    IntlvEn = (UINT8) ((temp >> 8) & 0x7);
+
+    DramBase = ((UINT64) (MemFGetPCI (NBPtr, 0, 0, BFDramBaseHiReg0 + range) & 0xFF) << 40) |
+                 (((UINT64) temp & 0xFFFF0000) << 8);
+
+    // DRAM Limit
+    temp = MemFGetPCI (NBPtr, 0, 0, BFDramLimitReg0 + range);
+    *NodeID = (UINT8) (temp & 0x7);
+    IntlvSel = (UINT8) ((temp >> 8) & 0x7);
+    DramLimit = ((UINT64) (MemFGetPCI (NBPtr, 0, 0, BFDramLimitHiReg0 + range) & 0xFF) << 40) |
+                  (((UINT64) temp << 8) | 0xFFFFFF);
+    DramLimitSysAddr = (((UINT64) MemFGetPCI (NBPtr, *NodeID, 0, BFDramLimitAddr)) << 27) | 0x7FFFFFF;
+    ASSERT (DramLimit <= DramLimitSysAddr);
+
+    if ((DramEn != 0) && (DramBase <= SysAddr) && (SysAddr <= DramLimitSysAddr) &&
+        ((IntlvEn == 0) || (IntlvSel == ((SysAddr >> 12) & IntlvEn)))) {
+      // Determine the number of bit positions consumed by Node Interleaving
+      switch (IntlvEn) {
+
+      case 0x0:
+        ILog = 0;
+        break;
+
+      case 0x1:
+        ILog = 1;
+        break;
+
+      case 0x3:
+        ILog = 2;
+        break;
+
+      case 0x7:
+        ILog = 3;
+        break;
+
+      default:
+        IDS_ERROR_TRAP;
+      }
+
+      DramHoleOffset = MemFGetPCI (NBPtr, *NodeID, 0, BFDramHoleOffset) << 23;
+      DramHoleValid = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDramHoleValid);
+      DramHoleBase = MemFGetPCI (NBPtr, *NodeID, 0, BFDramHoleBase) << 24;
+      // Address belongs to this node based on DramBase/Limit,
+      // but is in the memory hole so it doesn't map to DRAM
+      if (DramHoleValid && (DramHoleBase <= SysAddr) && (SysAddr < 0x100000000)) {
+        return AGESA_BOUNDS_CHK;
+      }
+
+      // F2x10C Swapped Interleaved Region
+      IntLvRgnSwapEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnSwapEn);
+      if (IntLvRgnSwapEn) {
+        IntLvRgnBaseAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnBaseAddr);
+        IntLvRgnLmtAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnLmtAddr);
+        IntLvRgnSize = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnSize);
+        ASSERT (IntLvRgnSize == (IntLvRgnLmtAddr - IntLvRgnBaseAddr + 1));
+        if (((SysAddr >> 34) == 0) &&
+          ((((SysAddr >> 27) >= IntLvRgnBaseAddr) && ((SysAddr >> 27) <= IntLvRgnLmtAddr))
+           || ((SysAddr >> 27) < IntLvRgnSize))) {
+          SysAddr ^= (UINT64) IntLvRgnBaseAddr << 27;
+        }
+      }
+
+      // Extract variables from F2x110 DRAM Controller Select Low Register
+      DctSelHiRngEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelHiRngEn);
+      DctSelHi = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelHi);
+      DctSelIntLvEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelIntLvEn);
+      DctGangEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctGangEn);
+      DctSelIntLvAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelIntLvAddr);
+      DctSelBaseAddr = (UINT64) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelBaseAddr) << 27;
+      DctSelBaseOffset = (UINT64) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelBaseOffset) << 26;
+
+
+      // Determine if high DCT address range is being selected
+      if (DctSelHiRngEn && !DctGangEn && (SysAddr >= DctSelBaseAddr)) {
+        HiRangeSelected = TRUE;
+      } else {
+        HiRangeSelected = FALSE;
+      }
+
+      // Determine Channel
+      if (DctGangEn) {
+        *ChannelSelect = (UINT8) ((SysAddr >> 3) & 0x1);
+      } else if (HiRangeSelected) {
+        *ChannelSelect = DctSelHi;
+      } else if (DctSelIntLvEn && (DctSelIntLvAddr == 0)) {
+        *ChannelSelect = (UINT8) ((SysAddr >> 6) & 0x1);
+      } else if (DctSelIntLvEn && (((DctSelIntLvAddr >> 1) & 0x1) != 0)) {
+        temp = MemFUnaryXOR ((UINT32) ((SysAddr >> 16) & 0x1F));
+        if ((DctSelIntLvAddr & 0x1) != 0) {
+          *ChannelSelect = (UINT8) (((SysAddr >> 9) & 0x1) ^ temp);
+        } else {
+          *ChannelSelect = (UINT8) (((SysAddr >> 6) & 0x1) ^ temp);
+        }
+      } else if (DctSelIntLvEn) {
+        *ChannelSelect = (UINT8) ((SysAddr >> (12 + ILog)) & 0x1);
+      } else if (DctSelHiRngEn) {
+        *ChannelSelect = ~DctSelHi & 0x1;
+      } else {
+        *ChannelSelect = 0;
+      }
+      ASSERT (*ChannelSelect < NBPtr[*NodeID].DctCount);
+
+      // Determine base address offset
+      if (HiRangeSelected) {
+        if ((DctSelBaseAddr < DramHoleBase) && DramHoleValid && (SysAddr >= (UINT64) 0x100000000)) {
+          ChannelOffset = (UINT64) DramHoleOffset;
+        } else {
+          ChannelOffset = DctSelBaseOffset;
+        }
+      } else {
+        if (DramHoleValid && (SysAddr >= (UINT64) 0x100000000)) {
+          ChannelOffset = (UINT64) DramHoleOffset;
+        } else {
+          ChannelOffset = DramBase;
+        }
+      }
+
+      // Remove hoisting offset and normalize to DRAM bus addresses
+      ChannelAddr = SysAddr - ChannelOffset;
+
+      // Remove node interleaving
+      if (IntlvEn != 0) {
+        ChannelAddr = ((ChannelAddr >> (12 + ILog)) << 12) | (ChannelAddr & 0xFFF);
+      }
+
+      // Remove channel interleave
+      if (DctSelIntLvEn && !HiRangeSelected && !DctGangEn) {
+        if ((DctSelIntLvAddr & 1) != 1) {
+          // A[6] Select or Hash 6
+          ChannelAddr = ((ChannelAddr >> 7) << 6) | (ChannelAddr & 0x3F);
+        } else if (DctSelIntLvAddr == 1) {
+          // A[12]
+          ChannelAddr = ((ChannelAddr >> 13) << 12) | (ChannelAddr & 0xFFF);
+        } else {
+          // Hash 9
+          ChannelAddr = ((ChannelAddr >> 10) << 9) | (ChannelAddr & 0x1FF);
+        }
+      }
+
+      // Determine the Chip Select
+      for (cs = 0; cs < MAX_CS_PER_CHANNEL; ++ cs) {
+        DctNum = DctGangEn ? 0 : *ChannelSelect;
+
+        // Obtain the CS Base
+        temp = MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSBaseAddr0Reg + cs);
+        CSEn = (BOOLEAN) (temp & 0x1);
+        CSBase = ((UINT64) temp & NBPtr->CsRegMsk) << 8;
+
+        // Obtain the CS Mask
+        CSMask = ((UINT64) MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSMask0Reg + (cs >> 1)) & NBPtr->CsRegMsk) << 8;
+
+        // Adjust the Channel Addr for easy comparison
+        InputAddr = ((ChannelAddr >> 8) & NBPtr->CsRegMsk) << 8;
+
+        if (CSEn && ((InputAddr & ~CSMask) == (CSBase & ~CSMask))) {
+          CSFound = TRUE;
+
+          *ChipSelect = cs;
+
+          temp = MemFGetPCI (NBPtr, *NodeID, 0, BFOnLineSpareControl);
+          SwapDone = (BOOLEAN) ((temp >> (1 + 2 * (*ChannelSelect))) & 0x1);
+          BadDramCs = (UINT8) ((temp >> (4 + 4 * (*ChannelSelect))) & 0x7);
+          if (SwapDone && (cs == BadDramCs)) {
+            // Find the spare rank for the channel
+            for (spare = 0; spare < MAX_CS_PER_CHANNEL; ++spare) {
+              if ((MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSBaseAddr0Reg + spare) & 0x2) != 0) {
+                *ChipSelect = spare;
+                break;
+              }
+            }
+          }
+          ASSERT (*ChipSelect < MAX_CS_PER_CHANNEL);
+
+          break;
+        }
+      }
+    }
+    if (CSFound) {
+      break;
+    }
+  }
+
+  // last ditch sanity check
+  ASSERT (!CSFound || ((*NodeID < mmPtr->DieCount) && (*ChannelSelect < NBPtr[*NodeID].DctCount) && (*ChipSelect < MAX_CS_PER_CHANNEL)));
+  if (CSFound) {
+    return AGESA_SUCCESS;
+  } else {
+    return AGESA_BOUNDS_CHK;
+  }
+
+}
+
+
+/*-----------------------------------------------------------------------------*/
+/**
+*
+*   This function is the interface to call the PCI register access function
+*   defined in NB block.
+*
+*   @param[in]   *NBPtr - Pointer to the parameter structure MEM_NB_BLOCK
+*   @param[in]   NodeID - Node ID number of the target Northbridge
+*   @param[in]   DctNum - DCT number if applicable, otherwise, put 0
+*   @param[in]   BitFieldName - targeted bitfield
+*
+*   @retval      UINT32 - 32 bits PCI register value
+*
+*/
+UINT32
+STATIC
+MemFGetPCI (
+  IN   MEM_NB_BLOCK *NBPtr,
+  IN   UINT8 NodeID,
+  IN   UINT8 DctNum,
+  IN   BIT_FIELD_NAME BitFieldName
+  )
+{
+  MEM_NB_BLOCK *LocalNBPtr;
+  UINT8 Die;
+
+  // Find NBBlock that associates with node NodeID
+  for (Die = 0; (Die < MAX_NODES_SUPPORTED) && (NBPtr[Die].Node != NodeID); Die ++);
+  ASSERT (Die < MAX_NODES_SUPPORTED);
+
+  // Get the northbridge pointer for the targeted node.
+  LocalNBPtr = &NBPtr[Die];
+  LocalNBPtr->FamilySpecificHook[DCTSelectSwitch] (LocalNBPtr, &DctNum);
+  LocalNBPtr->Dct = DctNum;
+  // The caller of this function will take care of the ganged/unganged situation.
+  // So Ganged is set to be false here, and do PCI read on the DCT specified by DctNum.
+  return LocalNBPtr->GetBitField (LocalNBPtr, BitFieldName);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+*
+*   This function returns an even parity bit (making the total # of 1's even)
+*   {0, 1} = number of set bits in argument is {even, odd}.
+*
+*   @param[in]   address - the address on which the parity bit will be calculated
+*
+*   @retval      UINT8 - parity bit
+*
+*/
+
+UINT8
+STATIC
+MemFUnaryXOR (
+  IN   UINT32 address
+  )
+{
+  UINT8 parity;
+  UINT8 index;
+  parity = 0;
+  for (index = 0; index < 32; ++ index) {
+    parity = (UINT8) (parity ^ (address & 0x1));
+    address = address >> 1;
+  }
+  return parity;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/IDENDIMM/mfidendimm.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/IDENDIMM/mfidendimm.h
new file mode 100644
index 0000000000..9e1c9eacc4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/IDENDIMM/mfidendimm.h
@@ -0,0 +1,108 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfidendimm.h
+ *
+ * Header file for address to dimm identification translator.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 45911 $ @e \$Date: 2011-01-24 13:55:11 -0700 (Mon, 24 Jan 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MFIDENDIMM_H_
+#define _MFIDENDIMM_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemNIdentifyDimmConstructorDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+BOOLEAN
+MemNIdentifyDimmConstructorDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+BOOLEAN
+MemNIdentifyDimmConstructorHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+BOOLEAN
+MemNIdentifyDimmConstructorC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+BOOLEAN
+MemNIdentifyDimmConstructorLN (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+#endif //_MFIDENDIMM_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/INTLVRN/mfintlvrn.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/INTLVRN/mfintlvrn.c
new file mode 100644
index 0000000000..6ce81dece8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/INTLVRN/mfintlvrn.c
@@ -0,0 +1,164 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfrintlv.c
+ *
+ * Feature Region interleaving support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/Intlvrgn)
+ * @e \$Revision: 49831 $ @e \$Date: 2011-03-29 10:26:15 -0600 (Tue, 29 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mfintlvrn.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_INTLVRN_MFINTLVRN_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define _4GB_RJ27 ((UINT32)4 << (30 - 27))
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   MemFInterleaveRegion:
+ *
+ *  Applies region interleaving if both DCTs have different size of memory, and
+ *  the channel interleaving region doesn't have UMA covered.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemFInterleaveRegion (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 TOM;
+  UINT32 TOM2;
+  UINT32 TOMused;
+  UINT32 UmaBase;
+  UINT32 DctSelBase;
+  S_UINT64 SMsr;
+  LOCATE_HEAP_PTR LocHeap;
+  UMA_INFO *UmaInfoPtr;
+
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  DIE_STRUCT *MCTPtr;
+
+  MemPtr = NBPtr->MemPtr;
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  UmaBase = (UINT32) RefPtr->UmaBase >> (27 - 16);
+
+  //TOM scaled from [47:0] to [47:27]
+  LibAmdMsrRead (TOP_MEM, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.lo += (16 << 20);  // Add 16MB to gain back C6 region if C6 is enabled
+  TOM = (SMsr.lo >> 27) | (SMsr.hi << (32 - 27));
+
+  //TOM2 scaled from [47:0] to [47:27]
+  LibAmdMsrRead (TOP_MEM2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  TOM2 = (SMsr.lo >> 27) | (SMsr.hi << (32 - 27));
+
+  TOMused = (UmaBase >= _4GB_RJ27) ? TOM2 : TOM;
+
+  if (UmaBase != 0) {
+    //Check if channel interleaving is enabled ? if so, go to next step.
+    if (NBPtr->GetBitField (NBPtr, BFDctSelIntLvEn) == 1) {
+      DctSelBase = NBPtr->GetBitField (NBPtr, BFDctSelBaseAddr);
+      //Skip if DctSelBase is equal to 0, because DCT0 has as the same memory size as DCT1.
+      if (DctSelBase != 0) {
+        //We need not enable swapped interleaved region when channel interleaving region has covered all of the UMA.
+        if (DctSelBase < TOMused) {
+          NBPtr->EnableSwapIntlvRgn (NBPtr, UmaBase, TOMused);
+
+          // Set UMA attribute to interleaved after interleaved region has been swapped
+          LocHeap.BufferHandle = AMD_UMA_INFO_HANDLE;
+          if (HeapLocateBuffer (&LocHeap, &(NBPtr->MemPtr->StdHeader)) == AGESA_SUCCESS) {
+            UmaInfoPtr = (UMA_INFO *) LocHeap.BufferPtr;
+            UmaInfoPtr->UmaAttributes = UMA_ATTRIBUTE_INTERLEAVE | UMA_ATTRIBUTE_ON_DCT0 | UMA_ATTRIBUTE_ON_DCT1;
+          } else {
+            ASSERT (FALSE);
+          }
+        }
+      }
+    }
+  }
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/INTLVRN/mfintlvrn.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/INTLVRN/mfintlvrn.h
new file mode 100644
index 0000000000..6c57d8b38d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/INTLVRN/mfintlvrn.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfintlvrn.h
+ *
+ * Feature region interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+#ifndef _MFINTLVRN_H_
+#define _MFINTLVRN_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+MemFInterleaveRegion (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MFINTLVRN_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/LVDDR3/mflvddr3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/LVDDR3/mflvddr3.c
new file mode 100644
index 0000000000..d613709ac2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/LVDDR3/mflvddr3.c
@@ -0,0 +1,173 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * lvddr3.c
+ *
+ * Voltage change for DDR3 DIMMs.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/LVDDR3)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_LVDDR3_MFLVDDR3_FILECODE
+/* features */
+#include "mflvddr3.h"
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculate the common lowest voltage supported by all DDR3
+ *   DIMMs in the system. This function only needs to be called on BSP.
+ *
+ *   @param[in, out]    *NBPtr - Pointer to NB block
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFLvDdr3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CH_DEF_STRUCT *ChannelPtr;
+  MEM_TECH_BLOCK  *TechPtr;
+  MEM_SHARED_DATA *mmSharedPtr;
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 Dimm;
+  UINT8 *SpdBufferPtr;
+  UINT8 VDDByte;
+  UINT8 VoltageMap;
+
+  mmSharedPtr = NBPtr->SharedPtr;
+  TechPtr = NBPtr->TechPtr;
+  VoltageMap = 0xFF;
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+      NBPtr->SwitchChannel (NBPtr, Channel);
+      ChannelPtr = NBPtr->ChannelPtr;
+      for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+        if (TechPtr->GetDimmSpdBuffer (TechPtr, &SpdBufferPtr, Dimm)) {
+          // SPD byte 6: Module Nominal Voltage, VDD
+          // 1.5v - bit 0
+          // 1.35v - bit 1
+          // 1.2v - bit 2
+          VDDByte = SpdBufferPtr[MNVVDD];
+          IDS_HDT_CONSOLE (MEM_FLOW, "Node%d DCT%d Channel%d Dimm%d VDD Byte: 0x%02x\n", NBPtr->Node, Dct, Channel, Dimm, VDDByte);
+
+          // Reverse the 1.5V operable bit. So its encoding can be consistent
+          // with that of 1.35V and 1.25V operable bit.
+          VDDByte ^= 1;
+          ASSERT (VDDByte != 0);
+
+          if (mmSharedPtr->VoltageMap != 0) {
+            // Get the common supported voltage map
+            VoltageMap &= VDDByte;
+          } else {
+            // This is the second execution of all the loop as no common voltage is found
+            if (VDDByte == (1 << VOLT1_5_ENCODED_VAL)) {
+              // Always exclude 1.5V dimm if no common voltage is found
+              ChannelPtr->DimmExclude |= (UINT16) 1 << Dimm;
+            }
+          }
+        }
+      }
+      if (mmSharedPtr->VoltageMap == 0) {
+        NBPtr->DCTPtr->Timings.DimmExclude |= ChannelPtr->DimmExclude;
+      }
+    }
+  }
+
+  if (mmSharedPtr->VoltageMap != 0) {
+    mmSharedPtr->VoltageMap &= VoltageMap;
+  }
+
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/LVDDR3/mflvddr3.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/LVDDR3/mflvddr3.h
new file mode 100644
index 0000000000..e8560976a8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/LVDDR3/mflvddr3.h
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mflvddr3.h
+ *
+ * Header file for DDR3 DIMMs voltage configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MFLVDDR3_H_
+#define _MFLVDDR3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define MNVVDD 6
+#define LOWEST_VOLT_BIT 2
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemFLvDdr3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+);
+
+#endif //_MFLVDDR3_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/MEMCLR/mfmemclr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/MEMCLR/mfmemclr.c
new file mode 100644
index 0000000000..0d6265442c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/MEMCLR/mfmemclr.c
@@ -0,0 +1,152 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfmemclr.c
+ *
+ * Feature function for memory clear operation
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/Memclr)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "mfmemclr.h"
+#include "Ids.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_MEMCLR_MFMEMCLR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Initiates memory clear operation on one node with Dram on it.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+MemFMctMemClr_Init (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  AGESA_TESTPOINT (TpProcMemMemClr, &NBPtr->MemPtr->StdHeader);
+  if (NBPtr->RefPtr->EnableMemClr == TRUE) {
+    if (NBPtr->MCTPtr->NodeMemSize != 0) {
+      if (!NBPtr->MemCleared) {
+        NBPtr->PollBitField (NBPtr, BFMemClrBusy, 0, SPECIAL_PCI_ACCESS_TIMEOUT, FALSE);
+        if (NBPtr->GetBitField (NBPtr, BFDramEnabled) == 1) {
+          NBPtr->FamilySpecificHook[BeforeMemClr] (NBPtr, NBPtr);
+          NBPtr->SetBitField (NBPtr, BFDramBaseAddr, 0);
+          NBPtr->SetBitField (NBPtr, BFMemClrInit, 1);
+        }
+      }
+    }
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Ensures memory clear operation has completed on one node with Dram on it.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+MemFMctMemClr_Sync (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 MicroSecondToWait;
+
+  MicroSecondToWait = 0;
+  if (NBPtr->RefPtr->EnableMemClr == TRUE) {
+    if (NBPtr->MCTPtr->NodeMemSize != 0) {
+      // Calculate Timeout value:
+      // Timeout (in microsecond) = Memory Size * 1.5 ns / 8 Byte * 4 (Margin) * 1000 (change millisecond to us)
+      // NodeMemSize is system address right shifted by 16, so shift it 4 bits to right to convert it to MB.
+      // 1.5 / 8 * 4 * 1000 = 750
+      MicroSecondToWait = (NBPtr->MCTPtr->NodeMemSize >> 4) * 750;
+
+      if (!NBPtr->MemCleared) {
+        NBPtr->PollBitField (NBPtr, BFMemClrBusy, 0, MicroSecondToWait, FALSE);
+        NBPtr->PollBitField (NBPtr, BFMemCleared, 1, MicroSecondToWait, FALSE);
+        NBPtr->SetBitField (NBPtr, BFDramBaseAddr, NBPtr->MCTPtr->NodeSysBase >> (27 - 16));
+        NBPtr->MemCleared = TRUE;
+      }
+    }
+  }
+  return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/NDINTLV/mfndi.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/NDINTLV/mfndi.c
new file mode 100644
index 0000000000..e827f17dc9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/NDINTLV/mfndi.c
@@ -0,0 +1,244 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfndi.c
+ *
+ * Feature applies Node memory interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/Ndintlv)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mm.h"
+#include "mn.h"
+#include "mport.h"
+#include "mfndi.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_NDINTLV_MFNDI_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define _4GB_ (0x10000)
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFCheckInterleaveNodes (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Perform a check to see if node interleaving can be enabled on each node.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  Node interleaving can be enabled.
+ *     @return          FALSE - Node interleaving cannot be enabled.
+ */
+
+BOOLEAN
+MemFCheckInterleaveNodes (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  DIE_STRUCT *MCTPtr;
+
+  ASSERT (NBPtr != NULL);
+
+  MCTPtr = NBPtr->MCTPtr;
+
+  if (MCTPtr->NodeMemSize != 0) {
+    if (!NBPtr->SharedPtr->NodeIntlv.IsValid) {
+      NBPtr->SharedPtr->NodeIntlv.NodeMemSize = MCTPtr->NodeMemSize;
+      NBPtr->SharedPtr->NodeIntlv.Dct0MemSize = MCTPtr->DctData[0].Timings.DctMemSize;
+      NBPtr->SharedPtr->NodeIntlv.IsValid = TRUE;
+    } else {
+      if ((NBPtr->SharedPtr->NodeIntlv.NodeMemSize != MCTPtr->NodeMemSize) ||
+          (NBPtr->SharedPtr->NodeIntlv.Dct0MemSize != MCTPtr->DctData[0].Timings.DctMemSize)) {
+        return FALSE;
+      }
+    }
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Applies Node memory interleaving for each node.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFInterleaveNodes (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 NodeCnt;
+  UINT8 BitShift;
+  UINT32 MemSize;
+  UINT32 Dct0MemSize;
+  UINT32 NodeSysBase;
+  UINT32 NodeSysLimit;
+  UINT32 HoleBase;
+  UINT32 HoleSize;
+  UINT32 HoleOffset;
+  S_UINT64 SMsr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  DIE_STRUCT *MCTPtr;
+
+  ASSERT (NBPtr != NULL);
+
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  if (RefPtr->GStatus[GsbSoftHole] || RefPtr->GStatus[GsbHWHole]) {
+    HoleBase = RefPtr->HoleBase;
+    HoleSize = _4GB_ - HoleBase;
+  } else {
+    HoleBase = 0;
+    HoleSize = 0;
+  }
+
+  NodeCnt = NBPtr->SharedPtr->NodeIntlv.NodeCnt;
+  Dct0MemSize = NBPtr->SharedPtr->NodeIntlv.Dct0MemSize;
+  MemSize = NBPtr->SharedPtr->NodeIntlv.NodeMemSize;
+
+  BitShift = LibAmdBitScanForward (NodeCnt);
+  Dct0MemSize <<= BitShift;
+  if (HoleSize != 0) {
+    RefPtr->GStatus[GsbHWHole] = TRUE;
+    HoleOffset = HoleSize;
+    if (Dct0MemSize >= HoleBase) {
+      Dct0MemSize += HoleSize;
+    } else {
+      HoleOffset += Dct0MemSize;
+    }
+  } else {
+    HoleOffset = 0;
+  }
+
+  MemSize = (MemSize << BitShift) + HoleSize;
+
+  MCTPtr->NodeSysBase = 0;
+  MCTPtr->NodeSysLimit = MemSize - 1;
+  RefPtr->SysLimit = MemSize - 1;
+
+  // When node interleaving is enabled with larger than 1012GB memory,
+  // system memory limit will be lowered to fill in HT reserved region.
+  // TOP_MEM2 was set in CpuMemTyping and needs to be updated as well.
+  if (RefPtr->SysLimit >= HT_REGION_BASE_RJ16) {
+    if (RefPtr->LimitMemoryToBelow1Tb) {
+      SMsr.hi = HT_REGION_BASE_RJ16 >> (32 - 16);
+      SMsr.lo = HT_REGION_BASE_RJ16 << 16;
+    } else {
+      SMsr.hi = MemSize >> (32 - 16);
+      SMsr.lo = MemSize << 16;
+    }
+    LibAmdMsrWrite (TOP_MEM2, (UINT64 *)&SMsr, &(NBPtr->MemPtr->StdHeader));
+    IDS_HDT_CONSOLE (MEM_FLOW, "TOP_MEM2: %08x0000\n", MemSize);
+    RefPtr->Sub1THoleBase =  HT_REGION_BASE_RJ16;
+    RefPtr->SysLimit = HT_REGION_BASE_RJ16 - 1;
+  } else {
+    RefPtr->Sub1THoleBase =  RefPtr->SysLimit + 1;
+  }
+
+  NBPtr->SetBitField (NBPtr, BFDramIntlvSel, NBPtr->SharedPtr->NodeIntlv.NodeIntlvSel);
+  NBPtr->SetBitField (NBPtr, BFDramBaseAddr, 0);
+  NBPtr->SetBitField (NBPtr, BFDramIntlvEn, NodeCnt - 1);
+  NBPtr->SetBitField (NBPtr, BFDramLimitAddr, (MemSize - 1) >> (27 - 16));
+
+  if (HoleSize != 0) {
+    MCTPtr->Status[SbHWHole] = TRUE;
+    // DramHoleBase will be set when sync address map to other nodes.
+    NBPtr->SetBitField (NBPtr, BFDramHoleOffset, HoleOffset >> (23 - 16));
+    NBPtr->SetBitField (NBPtr, BFDramHoleValid, 1);
+  }
+
+  if ((MCTPtr->DctData[1].Timings.DctMemSize != 0) && (!NBPtr->Ganged)) {
+    NBPtr->SetBitField (NBPtr, BFDctSelBaseAddr, Dct0MemSize >> (27 - 16));
+    NBPtr->SetBitField (NBPtr, BFDctSelBaseOffset, Dct0MemSize >> (26 - 16));
+  }
+
+  NodeSysBase = NodeCnt - 1;
+  NodeSysLimit = ((MemSize - 1)& 0xFFFFFF00) | NBPtr->SharedPtr->NodeIntlv.NodeIntlvSel;
+  NBPtr->SharedPtr->NodeMap[NBPtr->Node].IsValid = TRUE;
+  NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysBase = NodeSysBase;
+  NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysLimit = NodeSysLimit;
+
+  NBPtr->SharedPtr->NodeIntlv.NodeIntlvSel++;
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/NDINTLV/mfndi.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/NDINTLV/mfndi.h
new file mode 100644
index 0000000000..ec7cc4e5cb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/NDINTLV/mfndi.h
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfndi.h
+ *
+ * Feature node interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+#ifndef _MFNDI_H_
+#define _MFNDI_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFInterleaveNodes (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MFNDI_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ODTHERMAL/mfodthermal.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ODTHERMAL/mfodthermal.c
new file mode 100644
index 0000000000..22a06f2515
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ODTHERMAL/mfodthermal.c
@@ -0,0 +1,175 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfodthermal.c
+ *
+ * On Dimm thermal management.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Ids.h"
+#include "mfodthermal.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_ODTHERMAL_MFODTHERMAL_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function does On-Dimm thermal management.
+ *
+ *   @param[in, out]   *NBPtr - Pointer to the MEM_NB_BLOCK.
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFOnDimmThermal (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 i;
+  UINT8 Dct;
+  CH_DEF_STRUCT *ChannelPtr;
+  MEM_DATA_STRUCT *MemPtr;
+  UINT8 *SpdBufferPtr;
+  UINT8 ThermalOp;
+  BOOLEAN ODTSEn;
+  BOOLEAN ExtendTmp;
+
+  ODTSEn = FALSE;
+  ExtendTmp = FALSE;
+
+  ASSERT (NBPtr != NULL);
+  MemPtr = NBPtr->MemPtr;
+  AGESA_TESTPOINT (TpProcMemOnDimmThermal, &MemPtr->StdHeader);
+  if (NBPtr->MCTPtr->NodeMemSize != 0) {
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      // Only go through the DCT if it is not disabled.
+      if (NBPtr->GetBitField (NBPtr, BFDisDramInterface) == 0) {
+        ChannelPtr = NBPtr->ChannelPtr;
+        // If Ganged mode is enabled, need to go through all dram devices on both DCTs.
+        if (!NBPtr->Ganged || (NBPtr->Dct != 1)) {
+          if (!(NBPtr->IsSupported[CheckSetSameDctODTsEn]) || (NBPtr->IsSupported[CheckSetSameDctODTsEn] && (NBPtr->Dct != 1))) {
+            ODTSEn = TRUE;
+            ExtendTmp = TRUE;
+          }
+        }
+        for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i ++) {
+          if (NBPtr->TechPtr->GetDimmSpdBuffer (NBPtr->TechPtr, &SpdBufferPtr, i)) {
+            // Check byte 31: thermal and refresh option.
+            ThermalOp = SpdBufferPtr[THERMAL_OPT];
+            // Bit 3: ODTS readout
+            if (!((ThermalOp >> 3) & 1)) {
+              ODTSEn = FALSE;
+            }
+            // Bit 0: Extended Temperature Range.
+            if (!(ThermalOp & 1)) {
+              ExtendTmp = FALSE;
+            }
+          }
+        }
+
+        if (!NBPtr->Ganged || (NBPtr->Dct == 1)) {
+          // If in ganged mode, need to switch back to DCT0 to set the registers.
+          if (NBPtr->Ganged || NBPtr->IsSupported[CheckSetSameDctODTsEn]) {
+            NBPtr->SwitchDCT (NBPtr, 0);
+            ChannelPtr = NBPtr->ChannelPtr;
+          }
+          // If all dram devices on a DCT support ODTS
+          if (ODTSEn) {
+            NBPtr->SetBitField (NBPtr, BFODTSEn, 1);
+          }
+          ChannelPtr->ExtendTmp = ExtendTmp;
+        }
+      }
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tDct %d\n", Dct);
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\tODTSEn = %d\n", ODTSEn);
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\tExtendTmp = %d\n", ExtendTmp);
+    }
+  }
+  return TRUE;
+}
+
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ODTHERMAL/mfodthermal.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ODTHERMAL/mfodthermal.h
new file mode 100644
index 0000000000..c0c5b8aa7e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/ODTHERMAL/mfodthermal.h
@@ -0,0 +1,78 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfodthermal.h
+ *
+ * Header file for On-Dimm thermal management.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MFODTHERMAL_H_
+#define _MFODTHERMAL_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFOnDimmThermal (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif //_MFODTHERMAL_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/OLSPARE/mfspr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/OLSPARE/mfspr.c
new file mode 100644
index 0000000000..55e038cf23
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/OLSPARE/mfspr.c
@@ -0,0 +1,170 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfspr.c
+ *
+ * Feature enable online spare
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/Olspare)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "mfspr.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_OLSPARE_MFSPR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Enable online spare on current node if it is requested.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFOnlineSpare (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 q;
+  UINT8  Value8;
+  BOOLEAN Flag;
+  BOOLEAN OnlineSprEnabled[MAX_CHANNELS_PER_SOCKET];
+
+  MEM_PARAMETER_STRUCT *RefPtr;
+  DIE_STRUCT *MCTPtr;
+
+  ASSERT (NBPtr != NULL);
+
+  RefPtr = NBPtr->RefPtr;
+  Flag = FALSE;
+  if (RefPtr->EnableOnLineSpareCtl != 0) {
+    RefPtr->GStatus[GsbEnDIMMSpareNW] = TRUE;
+    MCTPtr = NBPtr->MCTPtr;
+
+    // Check if online spare can be enabled on current node
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      ASSERT (Dct < sizeof (OnlineSprEnabled));
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      OnlineSprEnabled[Dct] = FALSE;
+      if ((MCTPtr->GangedMode == 0) || (MCTPtr->Dct == 0)) {
+        if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+          // Make sure at least two chip-selects are available
+          Value8 = LibAmdBitScanReverse (NBPtr->DCTPtr->Timings.CsEnabled);
+          if (Value8 > LibAmdBitScanForward (NBPtr->DCTPtr->Timings.CsEnabled)) {
+            OnlineSprEnabled[Dct] = TRUE;
+            Flag = TRUE;
+          } else {
+            PutEventLog (AGESA_ERROR, MEM_ERROR_DIMM_SPARING_NOT_ENABLED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+            MCTPtr->ErrStatus[EsbSpareDis] = TRUE;
+          }
+        }
+      }
+    }
+
+    // If we don't have spared rank on any DCT, we don't run the rest part of the code.
+    if (!Flag) {
+      return FALSE;
+    }
+
+    MCTPtr->NodeMemSize = 0;
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      if (OnlineSprEnabled[Dct]) {
+        // Only run StitchMemory if we need to set a spare rank.
+        NBPtr->DCTPtr->Timings.DctMemSize = 0;
+        for (q = 0; q < MAX_CS_PER_CHANNEL; q++) {
+          NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + q, 0);
+        }
+        Flag = NBPtr->StitchMemory (NBPtr);
+        ASSERT (Flag == TRUE);
+      } else if ((MCTPtr->GangedMode == 0) && (NBPtr->DCTPtr->Timings.DctMemSize != 0)) {
+        // Otherwise, need to adjust the memory size on the node.
+        MCTPtr->NodeMemSize += NBPtr->DCTPtr->Timings.DctMemSize;
+        MCTPtr->NodeSysLimit = MCTPtr->NodeMemSize - 1;
+      }
+    }
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/OLSPARE/mfspr.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/OLSPARE/mfspr.h
new file mode 100644
index 0000000000..bc8daa7b80
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/OLSPARE/mfspr.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfspr.h
+ *
+ * Feature enable Online spare
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MFSPR_H_
+#define _MFSPR_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFOnlineSpare (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MFSPR_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/PARTRN/mfParallelTraining.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/PARTRN/mfParallelTraining.c
new file mode 100644
index 0000000000..271f12b34c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/PARTRN/mfParallelTraining.c
@@ -0,0 +1,289 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfParallelTraining.c
+ *
+ * This is the parallel training feature
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/PARTRN)
+ * @e \$Revision: 50871 $ @e \$Date: 2011-04-14 15:39:51 -0600 (Thu, 14 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "mfParallelTraining.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_PARTRN_MFPARALLELTRAINING_FILECODE
+
+/*-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+extern MEM_TECH_CONSTRUCTOR* memTechInstalled[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *    This is the main function to perform parallel training on all nodes.
+ *    This is the routine which will run on the remote AP.
+ *
+ *     @param[in,out]   *EnvPtr   - Pointer to the Training Environment Data
+ *     @param[in,out]   *StdHeader   - Pointer to the Standard Header of the AP
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+BOOLEAN
+MemFParallelTraining (
+  IN OUT   REMOTE_TRAINING_ENV *EnvPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  MEM_PARAMETER_STRUCT ParameterList;
+  MEM_NB_BLOCK NB;
+  MEM_TECH_BLOCK TB;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  MEM_DATA_STRUCT *MemPtr;
+  DIE_STRUCT *MCTPtr;
+  UINT8 p;
+  UINT8 i;
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 *BufferPtr;
+  UINT8 DctCount;
+  UINT8 ChannelCount;
+  UINT8 RowCount;
+  UINT8 ColumnCount;
+  UINT16 SizeOfNewBuffer;
+  AP_DATA_TRANSFER ReturnData;
+
+  //
+  // Initialize Parameters
+  //
+  ReturnData.DataPtr = NULL;
+  ReturnData.DataSizeInDwords = 0;
+  ReturnData.DataTransferFlags = 0;
+
+  ASSERT (EnvPtr != NULL);
+  //
+  // Replace Standard header of a AP
+  //
+  LibAmdMemCopy (StdHeader, &(EnvPtr->StdHeader), sizeof (AMD_CONFIG_PARAMS), &(EnvPtr->StdHeader));
+
+
+  //
+  //  Allocate buffer for training data
+  //
+  BufferPtr = (UINT8 *) (&EnvPtr->DieStruct);
+  DctCount = EnvPtr->DieStruct.DctCount;
+  BufferPtr += sizeof (DIE_STRUCT);
+  ChannelCount = ((DCT_STRUCT *) BufferPtr)->ChannelCount;
+  BufferPtr += DctCount * sizeof (DCT_STRUCT);
+  RowCount = ((CH_DEF_STRUCT *) BufferPtr)->RowCount;
+  ColumnCount = ((CH_DEF_STRUCT *) BufferPtr)->ColumnCount;
+
+  SizeOfNewBuffer = sizeof (DIE_STRUCT) +
+                    DctCount * (
+                      sizeof (DCT_STRUCT) + (
+                        ChannelCount * (
+                          sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK) + (
+                            RowCount * ColumnCount * NUMBER_OF_DELAY_TABLES +
+                            (MAX_BYTELANES_PER_CHANNEL * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) +
+                            (MAX_DIMMS_PER_CHANNEL * MAX_NUMBER_LANES)
+                          )
+                        )
+                      )
+                    );
+  AllocHeapParams.RequestedBufferSize = SizeOfNewBuffer;
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, 0, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+    BufferPtr = AllocHeapParams.BufferPtr;
+    LibAmdMemCopy ( BufferPtr,
+                    &(EnvPtr->DieStruct),
+                    sizeof (DIE_STRUCT) + DctCount * (sizeof (DCT_STRUCT) + ChannelCount * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))),
+                    StdHeader
+                  );
+
+    //
+    //  Fix up pointers
+    //
+    MCTPtr = (DIE_STRUCT *) BufferPtr;
+    BufferPtr += sizeof (DIE_STRUCT);
+    MCTPtr->DctData = (DCT_STRUCT *) BufferPtr;
+    BufferPtr += MCTPtr->DctCount * sizeof (DCT_STRUCT);
+    for (Dct = 0; Dct < MCTPtr->DctCount; Dct++) {
+      MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) BufferPtr;
+      BufferPtr += MCTPtr->DctData[Dct].ChannelCount * sizeof (CH_DEF_STRUCT);
+      for (Channel = 0; Channel < MCTPtr->DctData[Dct].ChannelCount; Channel++) {
+        MCTPtr->DctData[Dct].ChData[Channel].MCTPtr = MCTPtr;
+        MCTPtr->DctData[Dct].ChData[Channel].DCTPtr = &MCTPtr->DctData[Dct];
+      }
+    }
+    NB.PSBlock = (MEM_PS_BLOCK *) BufferPtr;
+    BufferPtr += DctCount * ChannelCount * sizeof (MEM_PS_BLOCK);
+
+    ReturnData.DataPtr = AllocHeapParams.BufferPtr;
+    ReturnData.DataSizeInDwords = (SizeOfNewBuffer + 3) / 4;
+    ReturnData.DataTransferFlags = 0;
+
+    //
+    // Allocate Memory for the MEM_DATA_STRUCT we will use
+    //
+    AllocHeapParams.RequestedBufferSize = sizeof (MEM_DATA_STRUCT);
+    AllocHeapParams.BufferHandle = AMD_MEM_DATA_HANDLE;
+    AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+    if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+      MemPtr = (MEM_DATA_STRUCT *)AllocHeapParams.BufferPtr;
+
+      LibAmdMemCopy (&(MemPtr->StdHeader), &(EnvPtr->StdHeader), sizeof (AMD_CONFIG_PARAMS), StdHeader);
+
+      //
+      // Copy Parameters from environment
+      //
+      ParameterList.HoleBase = EnvPtr->HoleBase;
+      ParameterList.BottomIo = EnvPtr->BottomIo;
+      ParameterList.UmaSize = EnvPtr->UmaSize;
+      ParameterList.SysLimit = EnvPtr->SysLimit;
+      ParameterList.TableBasedAlterations = EnvPtr->TableBasedAlterations;
+      ParameterList.PlatformMemoryConfiguration = EnvPtr->PlatformMemoryConfiguration;
+      MemPtr->ParameterListPtr = &ParameterList;
+
+      for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+        MemPtr->GetPlatformCfg[p] = EnvPtr->GetPlatformCfg[p];
+      }
+
+      MemPtr->ErrorHandling = EnvPtr->ErrorHandling;
+      //
+      // Create Local NBBlock and Tech Block
+      //
+      EnvPtr->NBBlockCtor (&NB, MCTPtr, EnvPtr->FeatPtr);
+      NB.RefPtr = &ParameterList;
+      NB.MemPtr = MemPtr;
+      i = 0;
+      while (memTechInstalled[i] != NULL) {
+        if (memTechInstalled[i] (&TB, &NB)) {
+          break;
+        }
+        i++;
+      }
+      NB.TechPtr = &TB;
+      NB.TechBlockSwitch (&NB);
+
+      //
+      // Setup CPU Mem Type MSRs on the AP
+      //
+      NB.CpuMemTyping (&NB);
+
+      IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", NB.Node);
+      //
+      // Call Technology Specific Training routine
+      //
+      NB.TrainingFlow (&NB);
+      //
+      // Copy training data to ReturnData buffer
+      //
+      LibAmdMemCopy ( BufferPtr,
+                      MCTPtr->DctData[0].ChData[0].RcvEnDlys,
+                      ((DctCount * ChannelCount) * (
+                         (RowCount * ColumnCount * NUMBER_OF_DELAY_TABLES) +
+                         (MAX_BYTELANES_PER_CHANNEL * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) +
+                         (MAX_DIMMS_PER_CHANNEL * MAX_NUMBER_LANES)
+                        )
+                      ),
+                      StdHeader);
+
+      HeapDeallocateBuffer (AMD_MEM_DATA_HANDLE, StdHeader);
+      //
+      // Restore pointers
+      //
+      for (Dct = 0; Dct < MCTPtr->DctCount; Dct++) {
+        for (Channel = 0; Channel < MCTPtr->DctData[Dct].ChannelCount; Channel++) {
+          MCTPtr->DctData[Dct].ChData[Channel].MCTPtr = &EnvPtr->DieStruct;
+          MCTPtr->DctData[Dct].ChData[Channel].DCTPtr = &EnvPtr->DieStruct.DctData[Dct];
+
+          MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RcvEnDlys;
+          MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDqsDlys;
+          MCTPtr->DctData[Dct].ChData[Channel].RdDqsDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqsDlys;
+          MCTPtr->DctData[Dct].ChData[Channel].RdDqsDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqsDlys;
+          MCTPtr->DctData[Dct].ChData[Channel].WrDatDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDatDlys;
+          MCTPtr->DctData[Dct].ChData[Channel].RdDqs__Dlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqs__Dlys;
+          MCTPtr->DctData[Dct].ChData[Channel].RdDqsMinDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqsMinDlys;
+          MCTPtr->DctData[Dct].ChData[Channel].RdDqsMaxDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqsMaxDlys;
+          MCTPtr->DctData[Dct].ChData[Channel].WrDatMinDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDatMinDlys;
+          MCTPtr->DctData[Dct].ChData[Channel].WrDatMaxDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDatMaxDlys;
+          MCTPtr->DctData[Dct].ChData[Channel].FailingBitMask = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].FailingBitMask;
+        }
+        MCTPtr->DctData[Dct].ChData = EnvPtr->DieStruct.DctData[Dct].ChData;
+      }
+      MCTPtr->DctData = EnvPtr->DieStruct.DctData;
+    }
+
+    //
+    // Signal to BSP that training is complete and Send Results
+    //
+    ASSERT (ReturnData.DataPtr != NULL);
+    ApUtilTransmitBuffer (EnvPtr->BspSocket, EnvPtr->BspCore, &ReturnData, StdHeader);
+
+    //
+    // Clean up and exit.
+    //
+    HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, 0, 0, 0), StdHeader);
+  } else {
+    MCTPtr = &EnvPtr->DieStruct;
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA, MCTPtr->NodeId, 0, 0, 0, StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocate heap for buffer for parallel training data
+  }
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/PARTRN/mfStandardTraining.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/PARTRN/mfStandardTraining.c
new file mode 100644
index 0000000000..35681a1d92
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/PARTRN/mfStandardTraining.c
@@ -0,0 +1,86 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfStandardTraining.c
+ *
+ * This is the standard training routine which performs all training from the BSP
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/PARTRN)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+  *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "mfStandardTraining.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_PARTRN_MFSTANDARDTRAINING_FILECODE
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *       This is the main function to perform memory training on all nodes from
+ *       the BSP only.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  This feature is enabled.
+ *     @return          FALSE - This feature is not enabled.
+ */
+BOOLEAN
+MemFStandardTraining (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  ASSERT (NBPtr != NULL);
+
+  NBPtr->TrainingFlow (NBPtr);
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/S3/mfs3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/S3/mfs3.c
new file mode 100644
index 0000000000..e1218d4f67
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/S3/mfs3.c
@@ -0,0 +1,719 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfs3.c
+ *
+ * Main S3 resume memory Entrypoint file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/FEAT/S3)
+ * @e \$Revision: 54775 $ @e \$Date: 2011-06-12 21:05:26 -0600 (Sun, 12 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "heapManager.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_S3_MFS3_FILECODE
+
+extern MEM_NB_SUPPORT memNBInstalled[];
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function is the main memory entry point for the S3 resume sequence
+ *      Requirements:
+ *
+ *      Run-Time Requirements:
+ *      1. Complete Hypertransport Bus Configuration
+ *      4. BSP in Big Real Mode
+ *      5. Stack available
+ *
+ *      @param[in]  *StdHeader - Config handle for library and services
+ *
+ *      @return     AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+AmdMemS3Resume (
+  IN   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  AGESA_STATUS RetVal;
+  MEM_MAIN_DATA_BLOCK mmData;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+  MEM_DATA_STRUCT *MemData;
+  UINT8 Die;
+  UINT8 DieCount;
+
+  //---------------------------------------------
+  //  Creation of NB Block for S3 resume
+  //---------------------------------------------
+  RetVal = MemS3InitNB (&S3NBPtr, &MemData, &mmData, StdHeader);
+  if (RetVal == AGESA_FATAL) {
+    return RetVal;
+  }
+  DieCount = mmData.DieCount;
+
+  //---------------------------------------------
+  //1. Errata Before resume sequence
+  //2. S3 Resume sequence
+  //3. Errata After resume sequence
+  //---------------------------------------------
+  for (Die = 0; Die < DieCount; Die ++) {
+    if (!S3NBPtr[Die].MemS3Resume (&S3NBPtr[Die], Die)) {
+      return AGESA_FATAL;
+    }
+    S3NBPtr[Die].MemS3RestoreScrub (S3NBPtr[Die].NBPtr, Die);
+  }
+
+  HeapDeallocateBuffer (AMD_MEM_S3_DATA_HANDLE, StdHeader);
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function deallocates heap space allocated in memory S3 resume.
+ *
+ *      @param[in]  *StdHeader - Config handle for library and services
+ *
+ *      @return     AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemS3Deallocate (
+  IN   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  AGESA_STATUS RetVal;
+  AGESA_STATUS tempRetVal;
+  UINT8 Tab;
+
+  RetVal = AGESA_SUCCESS;
+  for (Tab = 0; Tab < NumberOfNbRegTables; Tab++) {
+    HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_NB_REG_TABLE, Tab, 0, 0), StdHeader);
+  }
+
+  tempRetVal = HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_DIE_STRUCT_HANDLE, 0, 0, 0), StdHeader);
+  if (tempRetVal > RetVal) {
+    RetVal = tempRetVal;
+  }
+  tempRetVal = HeapDeallocateBuffer (AMD_MEM_AUTO_HANDLE, StdHeader);
+  if (tempRetVal > RetVal) {
+    RetVal = tempRetVal;
+  }
+  RetVal = HeapDeallocateBuffer (AMD_MEM_S3_NB_HANDLE, StdHeader);
+  if (tempRetVal > RetVal) {
+    RetVal = tempRetVal;
+  }
+  RetVal = HeapDeallocateBuffer (AMD_MEM_DATA_HANDLE, StdHeader);
+  if (tempRetVal > RetVal) {
+    RetVal = tempRetVal;
+  }
+  return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function is the entrance to get device list for memory registers.
+ *
+ *      @param[in, out]  **DeviceBlockHdrPtr - Pointer to the memory containing the
+ *                                             device descriptor list
+ *      @param[in]       *StdHeader - Config handle for library and services
+ *      @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemFS3GetDeviceList (
+  IN OUT   DEVICE_BLOCK_HEADER **DeviceBlockHdrPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 i;
+  UINT16 BufferSize;
+  UINT64 BufferOffset;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+  MEM_DATA_STRUCT *MemData;
+  MEM_MAIN_DATA_BLOCK mmData;
+  UINT8 Die;
+  UINT8 DieCount;
+  AGESA_STATUS RetVal;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  DESCRIPTOR_GROUP DeviceDescript[MAX_NODES_SUPPORTED];
+  BufferSize = 0;
+
+  //---------------------------------------------
+  //  Creation of NB Block for S3 resume
+  //---------------------------------------------
+  RetVal = MemS3InitNB (&S3NBPtr, &MemData, &mmData, StdHeader);
+  if (RetVal == AGESA_FATAL) {
+    return RetVal;
+  }
+  DieCount = mmData.DieCount;
+
+  // Get the mask bit and the register list for node that presents
+  for (Die = 0; Die < DieCount; Die ++) {
+    S3NBPtr->MemS3GetConPCIMask (S3NBPtr[Die].NBPtr, (VOID *)&DeviceDescript[Die]);
+    S3NBPtr->MemS3GetConMSRMask (S3NBPtr[Die].NBPtr, (VOID *)&DeviceDescript[Die]);
+    BufferSize = BufferSize + S3NBPtr->MemS3GetRegLstPtr (S3NBPtr[Die].NBPtr, (VOID *)&DeviceDescript[Die]);
+  }
+
+  // Base on the size of the device list, apply for a buffer for it.
+  AllocHeapParams.RequestedBufferSize = BufferSize + sizeof (DEVICE_BLOCK_HEADER);
+  AllocHeapParams.BufferHandle = AMD_S3_NB_INFO_BUFFER_HANDLE;
+  AllocHeapParams.Persist = HEAP_S3_RESUME;
+  AGESA_TESTPOINT (TpIfBeforeAllocateMemoryS3SaveBuffer, StdHeader);
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) {
+    return AGESA_FATAL;
+  }
+  AGESA_TESTPOINT (TpIfAfterAllocateMemoryS3SaveBuffer, StdHeader);
+
+  *DeviceBlockHdrPtr = (DEVICE_BLOCK_HEADER *) AllocHeapParams.BufferPtr;
+  (*DeviceBlockHdrPtr)->RelativeOrMaskOffset = (UINT16) AllocHeapParams.RequestedBufferSize;
+
+  // Copy device list on the stack to the heap.
+  BufferOffset = sizeof (DEVICE_BLOCK_HEADER) + (UINT64) AllocHeapParams.BufferPtr;
+  for (Die = 0; Die < DieCount; Die ++) {
+    for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+      // Copy PCI device descriptor to the heap if it exists.
+      if (DeviceDescript[Die].PCIDevice[i].RegisterListID != 0xFFFFFFFF) {
+        LibAmdMemCopy ((VOID *) BufferOffset, &(DeviceDescript[Die].PCIDevice[i]), sizeof (PCI_DEVICE_DESCRIPTOR), StdHeader);
+        (*DeviceBlockHdrPtr)->NumDevices ++;
+        BufferOffset += sizeof (PCI_DEVICE_DESCRIPTOR);
+      }
+      // Copy conditional PCI device descriptor to the heap if it exists.
+      if (DeviceDescript[Die].CPCIDevice[i].RegisterListID != 0xFFFFFFFF) {
+        LibAmdMemCopy ((VOID *) BufferOffset, &(DeviceDescript[Die].CPCIDevice[i]), sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR), StdHeader);
+        (*DeviceBlockHdrPtr)->NumDevices ++;
+        BufferOffset += sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR);
+      }
+      // Copy MSR device descriptor to the heap if it exists.
+      if (DeviceDescript[Die].MSRDevice[i].RegisterListID != 0xFFFFFFFF) {
+        LibAmdMemCopy ((VOID *) BufferOffset, &(DeviceDescript[Die].MSRDevice[i]), sizeof (MSR_DEVICE_DESCRIPTOR), StdHeader);
+        (*DeviceBlockHdrPtr)->NumDevices ++;
+        BufferOffset += sizeof (MSR_DEVICE_DESCRIPTOR);
+      }
+      // Copy conditional MSR device descriptor to the heap if it exists.
+      if (DeviceDescript[Die].CMSRDevice[i].RegisterListID != 0xFFFFFFFF) {
+        LibAmdMemCopy ((VOID *) BufferOffset, &(DeviceDescript[Die].PCIDevice[i]), sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR), StdHeader);
+        (*DeviceBlockHdrPtr)->NumDevices ++;
+        BufferOffset += sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR);
+      }
+    }
+  }
+
+  return RetVal;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function initialize the northbridge block and apply for heap space
+ *      before any function call is made to memory component during S3 resume.
+ *
+ *      @param[in]       *StdHeader - Config handle for library and services
+ *      @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemS3ResumeInitNB (
+  IN   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  AGESA_STATUS RetVal;
+  MEM_MAIN_DATA_BLOCK mmData;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+  MEM_DATA_STRUCT *MemData;
+  UINT8 Die;
+  UINT8 DieCount;
+  UINT8 SpecialCaseHeapSize;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  S3_SPECIAL_CASE_HEAP_HEADER SpecialHeapHeader[MAX_NODES_SUPPORTED];
+
+  SpecialCaseHeapSize = 0;
+
+  //---------------------------------------------
+  //  Creation of NB Block for S3 resume
+  //---------------------------------------------
+  RetVal = MemS3InitNB (&S3NBPtr, &MemData, &mmData, StdHeader);
+  if (RetVal == AGESA_FATAL) {
+    return RetVal;
+  }
+  DieCount = mmData.DieCount;
+
+  //--------------------------------------------------
+  //  Apply for heap space for special case registers
+  //--------------------------------------------------
+  for (Die = 0; Die < DieCount; Die ++) {
+    // Construct the header for the special case heap.
+    SpecialHeapHeader[Die].Node = S3NBPtr[Die].NBPtr->Node;
+    SpecialHeapHeader[Die].Offset = SpecialCaseHeapSize + (DieCount * (sizeof (S3_SPECIAL_CASE_HEAP_HEADER)));
+    SpecialCaseHeapSize = SpecialCaseHeapSize + S3NBPtr->MemS3SpecialCaseHeapSize;
+  }
+  AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (S3_SPECIAL_CASE_HEAP_HEADER))) + SpecialCaseHeapSize;
+  AllocHeapParams.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS, S3NBPtr[Die].NBPtr->Node, 0, 0, 0, StdHeader);
+    SetMemError (AGESA_FATAL, S3NBPtr[Die].NBPtr->MCTPtr);
+    ASSERT(FALSE); // Could not allocate heap space for "S3_SPECIAL_CASE_HEAP_HEADER"
+    return AGESA_FATAL;
+  }
+  LibAmdMemCopy ((VOID *) AllocHeapParams.BufferPtr, (VOID *) SpecialHeapHeader, (sizeof (S3_SPECIAL_CASE_HEAP_HEADER) * DieCount), StdHeader);
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function returns the PCI device register list according to the register
+ *      list ID.
+ *
+ *      @param[in]       *Device - pointer to the PCI_DEVICE_DESCRIPTOR
+ *      @param[out]      **RegisterHdr - pointer to the address of the register list
+ *      @param[in]       *StdHeader - Config handle for library and services
+ *
+ *      @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemFS3GetPciDeviceRegisterList (
+  IN       PCI_DEVICE_DESCRIPTOR     *Device,
+     OUT   PCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  AGESA_STATUS RetVal;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+  VOID *RegisterHeader;
+  LOCATE_HEAP_PTR LocHeap;
+  AGESA_BUFFER_PARAMS LocBufferParams;
+  LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+  LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+  LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+  AGESA_TESTPOINT (TpIfBeforeLocateS3PciBuffer, StdHeader);
+  if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+    S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
+  } else {
+    ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr
+    return AGESA_FATAL;
+  }
+  AGESA_TESTPOINT (TpIfAfterLocateS3PciBuffer, StdHeader);
+
+  // NB block has already been constructed by main block.
+  // No need to construct it here.
+  RetVal = S3NBPtr[Device->Node].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader);
+  *RegisterHdr = (PCI_REGISTER_BLOCK_HEADER *)RegisterHeader;
+  return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function returns the conditional PCI device register list according
+ *      to the register list ID.
+ *
+ *      @param[in]       *Device - pointer to the CONDITIONAL_PCI_DEVICE_DESCRIPTOR
+ *      @param[out]      **RegisterHdr - pointer to the address of the register list
+ *      @param[in]       *StdHeader - Config handle for library and services
+ *
+ *      @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemFS3GetCPciDeviceRegisterList (
+  IN       CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+     OUT   CPCI_REGISTER_BLOCK_HEADER        **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS                 *StdHeader
+  )
+{
+  AGESA_STATUS RetVal;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+  VOID *RegisterHeader;
+  LOCATE_HEAP_PTR LocHeap;
+  AGESA_BUFFER_PARAMS LocBufferParams;
+
+  LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+  LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+  LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+  AGESA_TESTPOINT (TpIfBeforeLocateS3CPciBuffer, StdHeader);
+  if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+    S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
+  } else {
+    ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr
+    return AGESA_FATAL;
+  }
+  AGESA_TESTPOINT (TpIfAfterLocateS3CPciBuffer, StdHeader);
+
+  // NB block has already been constructed by main block.
+  // No need to construct it here.
+  RetVal = S3NBPtr[Device->Node].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader);
+  *RegisterHdr = (CPCI_REGISTER_BLOCK_HEADER *)RegisterHeader;
+  return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function returns the MSR device register list according to the register
+ *      list ID.
+ *
+ *      @param[in]       *Device - pointer to the MSR_DEVICE_DESCRIPTOR
+ *      @param[out]      **RegisterHdr - pointer to the address of the register list
+ *      @param[in]       *StdHeader - Config handle for library and services
+ *
+ *      @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemFS3GetMsrDeviceRegisterList (
+  IN       MSR_DEVICE_DESCRIPTOR     *Device,
+     OUT   MSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  )
+{
+  AGESA_STATUS RetVal;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+  VOID *RegisterHeader;
+  LOCATE_HEAP_PTR LocHeap;
+  AGESA_BUFFER_PARAMS LocBufferParams;
+
+  LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+  LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+  LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+  AGESA_TESTPOINT (TpIfBeforeLocateS3MsrBuffer, StdHeader);
+  if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+    S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
+  } else {
+    ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr
+    return AGESA_FATAL;
+  }
+  AGESA_TESTPOINT (TpIfAfterLocateS3MsrBuffer, StdHeader);
+
+  // NB block has already been constructed by main block.
+  // No need to construct it here.
+  RetVal = S3NBPtr[BSP_DIE].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader);
+  *RegisterHdr = (MSR_REGISTER_BLOCK_HEADER *)RegisterHeader;
+  return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function returns the conditional MSR device register list according
+ *      to the register list ID.
+ *
+ *      @param[in]       *Device - pointer to the CONDITIONAL_PCI_DEVICE_DESCRIPTOR
+ *      @param[out]      **RegisterHdr - pointer to the address of the register list
+ *      @param[in]       *StdHeader - Config handle for library and services
+ *
+ *      @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemFS3GetCMsrDeviceRegisterList (
+  IN       CONDITIONAL_MSR_DEVICE_DESCRIPTOR     *Device,
+     OUT   CMSR_REGISTER_BLOCK_HEADER            **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS                     *StdHeader
+  )
+{
+  AGESA_STATUS RetVal;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+  VOID *RegisterHeader;
+  LOCATE_HEAP_PTR LocHeap;
+  AGESA_BUFFER_PARAMS LocBufferParams;
+
+  LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+  LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+  LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+
+  AGESA_TESTPOINT (TpIfBeforeLocateS3CMsrBuffer, StdHeader);
+  if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+    S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
+  } else {
+    ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr
+    return AGESA_FATAL;
+  }
+  AGESA_TESTPOINT (TpIfAfterLocateS3CMsrBuffer, StdHeader);
+
+  // NB block has already been constructed by main block.
+  // No need to construct it here.
+  RetVal = S3NBPtr[BSP_DIE].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader);
+  *RegisterHdr = (CMSR_REGISTER_BLOCK_HEADER *)RegisterHeader;
+  return RetVal;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function initialize needed data structures for S3 resume.
+ *
+ *      @param[in, out]  **S3NBPtr - Pointer to the pointer of northbridge block.
+ *      @param[in, out]  *MemPtr - Pointer to MEM_DATA_STRUCT.
+ *      @param[in, out]  *mmData - Pointer to MEM_MAIN_DATA_BLOCK.
+ *      @param[in]       *StdHeader - Config handle for library and services.
+ *
+ *      @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemS3InitNB (
+  IN OUT   S3_MEM_NB_BLOCK **S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT **MemPtr,
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 i;
+  AGESA_STATUS RetVal;
+  LOCATE_HEAP_PTR LocHeap;
+  MEM_NB_BLOCK *NBPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  UINT8 Die;
+  UINT8 DieCount;
+  BOOLEAN SkipScan;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  SkipScan = FALSE;
+  LocHeap.BufferHandle = AMD_MEM_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+    // NB block has already been constructed by main block.
+    // No need to construct it here.
+    *MemPtr = (MEM_DATA_STRUCT *)LocHeap.BufferPtr;
+    SkipScan = TRUE;
+  } else {
+    AllocHeapParams.RequestedBufferSize = sizeof (MEM_DATA_STRUCT);
+    AllocHeapParams.BufferHandle = AMD_MEM_DATA_HANDLE;
+    AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+    if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) {
+      ASSERT(FALSE); // Allocate failed for MEM_DATA_STRUCT
+      return AGESA_FATAL;
+    }
+    *MemPtr = (MEM_DATA_STRUCT *)AllocHeapParams.BufferPtr;
+    LibAmdMemCopy (&(*MemPtr)->StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+
+    GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &(*MemPtr)->StdHeader);
+    FamilySpecificServices->GetTscRate (FamilySpecificServices, &(*MemPtr)->TscRate, &(*MemPtr)->StdHeader);
+
+  }
+  mmData->MemPtr = *MemPtr;
+
+  if (!SkipScan) {
+    RetVal = MemSocketScan (mmData);
+    if (RetVal == AGESA_FATAL) {
+      return RetVal;
+    }
+  } else {
+    // We already have initialize data block, no need to do it again.
+    mmData->DieCount = mmData->MemPtr->DieCount;
+  }
+  DieCount = mmData->DieCount;
+
+  //---------------------------------------------
+  //  Creation of NB Block for S3 resume
+  //---------------------------------------------
+  // Search for AMD_MEM_AUTO_HANDLE on the heap first.
+  // Only apply for space on the heap if cannot find AMD_MEM_AUTO_HANDLE on the heap.
+  LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+  if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+    // NB block has already been constructed by main block.
+    // No need to construct it here.
+    *S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
+  } else {
+    AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (S3_MEM_NB_BLOCK)));
+    AllocHeapParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+    AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+    if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) {
+      ASSERT(FALSE); // Could not allocate space for "S3_MEM_NB_BLOCK"
+      return AGESA_FATAL;
+    }
+    *S3NBPtr = (S3_MEM_NB_BLOCK *)AllocHeapParams.BufferPtr;
+
+    LocHeap.BufferHandle = AMD_MEM_AUTO_HANDLE;
+    if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+      // NB block has already been constructed by main block.
+      // No need to construct it here.
+      NBPtr = (MEM_NB_BLOCK *)LocHeap.BufferPtr;
+    } else {
+      AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (MEM_NB_BLOCK)));
+      AllocHeapParams.BufferHandle = AMD_MEM_AUTO_HANDLE;
+      AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+      if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) {
+        ASSERT(FALSE); // Allocate failed for "MEM_NB_BLOCK"
+        return AGESA_FATAL;
+      }
+      NBPtr = (MEM_NB_BLOCK *)AllocHeapParams.BufferPtr;
+    }
+    // Construct each die.
+    for (Die = 0; Die < DieCount; Die ++) {
+      i = 0;
+      ((*S3NBPtr)[Die]).NBPtr = &NBPtr[Die];
+      while (memNBInstalled[i].MemS3ResumeConstructNBBlock != 0) {
+        if (memNBInstalled[i].MemS3ResumeConstructNBBlock ((VOID *)&((*S3NBPtr)[Die]), *MemPtr, Die)) {
+          break;
+        }
+        i++;
+      };
+      if (memNBInstalled[i].MemS3ResumeConstructNBBlock == 0) {
+        ASSERT(FALSE); // S3 resume NB constructor not found
+        return AGESA_FATAL;
+      }
+    }
+  }
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Waits specified number of 10ns cycles
+ *      @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ *      @param[in] Count - Number of 10ns cycles to wait
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemFS3Wait10ns (
+  IN       UINT32 Count,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT64 TargetTsc;
+  UINT64 CurrentTsc;
+
+  ASSERT (Count <= 1000000);
+
+  LibAmdMsrRead (TSC, &CurrentTsc, &MemPtr->StdHeader);
+  TargetTsc = CurrentTsc + ((Count * MemPtr->TscRate + 99) / 100);
+  do {
+    LibAmdMsrRead (TSC, &CurrentTsc, &MemPtr->StdHeader);
+  } while (CurrentTsc < TargetTsc);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/TABLE/mftds.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/TABLE/mftds.c
new file mode 100644
index 0000000000..f22482885c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/TABLE/mftds.c
@@ -0,0 +1,398 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mftds.c
+ *
+ * Northbridge table drive support file for DR
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/TABLE)
+ * @e \$Revision: 51024 $ @e \$Date: 2011-04-18 06:02:44 -0600 (Mon, 18 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mftds.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_TABLE_MFTDS_FILECODE
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define MAX_BYTELANES_PER_CHANNEL   (8 + 1)  ///< Max Bytelanes per channel
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+SetTableValues (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_TABLE_ALIAS MTPtr
+  );
+
+VOID
+SetTableValuesLoop (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_TABLE_ALIAS *MTPtr,
+  IN       UINT8     time
+  );
+
+/*-----------------------------------------------------------------------------
+ *
+ *   This function initializes bit field translation table
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_TABLE_ALIAS structure
+ *     @param[in]       time     - Indicate the timing for the register which is written.
+ *
+ *     @return          None
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemFInitTableDrive (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8     time
+  )
+{
+  MEM_TABLE_ALIAS *MTPtr;
+  MEM_TABLE_ALIAS *IdsMTPtr;
+
+  ASSERT (NBPtr != NULL);
+  IdsMTPtr = NULL;
+  IDS_HDT_CONSOLE (MEM_FLOW, "MemFInitTableDrive [%X] Start\n", time);
+  MTPtr = (MEM_TABLE_ALIAS *) NBPtr->RefPtr->TableBasedAlterations;
+
+  IDS_SKIP_HOOK (IDS_GET_DRAM_TABLE, &IdsMTPtr, &(NBPtr->MemPtr->StdHeader)) {
+    IDS_OPTION_HOOK (IDS_INIT_DRAM_TABLE, NBPtr, &(NBPtr->MemPtr->StdHeader));
+    IDS_OPTION_HOOK (IDS_GET_DRAM_TABLE, &IdsMTPtr, &(NBPtr->MemPtr->StdHeader));
+  }
+
+  SetTableValuesLoop (NBPtr, MTPtr, time);
+  SetTableValuesLoop (NBPtr, IdsMTPtr, time);
+
+  IDS_OPTION_HOOK (IDS_MT_BASE + time, NBPtr, &(NBPtr->MemPtr->StdHeader));
+  IDS_HDT_CONSOLE (MEM_FLOW, "MemFInitTableDrive End\n");
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *   This function initializes bit field translation table
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MTPtr   - Pointer to the MEM_TABLE_ALIAS structure
+ *     @param[in]       time     - Indicate the timing for the register which is written.
+ *
+ *     @return          None
+ * ----------------------------------------------------------------------------
+ */
+VOID
+SetTableValuesLoop (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_TABLE_ALIAS *MTPtr,
+  IN       UINT8     time
+  )
+{
+  UINT8 i;
+  UINT8 CurDct;
+
+  if (MTPtr != NULL) {
+    CurDct = NBPtr->Dct;
+    for (i = 0; MTPtr[i].time != MTEnd; i++) {
+      if ((MTPtr[i].attr != MTAuto) && (MTPtr[i].time == time)) {
+        SetTableValues (NBPtr, MTPtr[i]);
+      }
+    }
+    NBPtr->SwitchDCT (NBPtr, CurDct);
+  }
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *   Engine for setting Table Value.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       MTPtr    - Pointer to the MEM_TABLE_ALIAS structure
+ *
+ *     @return      None
+ * ----------------------------------------------------------------------------
+ */
+VOID
+SetTableValues (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_TABLE_ALIAS MTPtr
+  )
+{
+  UINT8 AccessType;
+  UINT16 ByteLane;
+  UINT8 Dct;
+  UINT8 i;
+  UINT8 j;
+  UINT32 TempVal[36];
+  UINT32 Temp2Val[72];
+  UINT8 *DqsSavePtr;
+  UINT8  DqsOffset;
+  BOOLEAN SaveDqs;
+
+  AccessType = 0;
+  DqsSavePtr = NULL;
+  SaveDqs = TRUE;
+
+  ASSERT (MTPtr.time <= MTValidTimePointLimit);
+  ASSERT (MTPtr.attr <= MTOr);
+  ASSERT (MTPtr.node <= MTNodes);
+  ASSERT (MTPtr.dct <= MTDcts);
+  ASSERT (MTPtr.dimm <= MTDIMMs);
+  ASSERT (MTPtr.data.s.bytelane <= MTBLs);
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    if ((MTPtr.dct == MTDcts) || (MTPtr.dct == Dct)) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      switch (MTPtr.bfindex) {
+      case BFRcvEnDly:
+        AccessType = AccessRcvEnDly;
+        DqsSavePtr = NULL;
+        break;
+      case BFWrDatDly:
+        AccessType = AccessWrDatDly;
+        DqsSavePtr = NBPtr->ChannelPtr->WrDatDlys;
+        break;
+      case BFRdDqsDly:
+        AccessType = AccessRdDqsDly;
+        DqsSavePtr = NBPtr->ChannelPtr->RdDqsDlys;
+        break;
+      case BFWrDqsDly:
+        AccessType = AccessWrDqsDly;
+        DqsSavePtr = NBPtr->ChannelPtr->WrDqsDlys;
+        break;
+      case BFRdDqs__Dly:
+        AccessType = AccessRdDqs__Dly;
+        DqsSavePtr = NBPtr->ChannelPtr->RdDqs__Dlys;
+        break;
+      case BFPhRecDly:
+        AccessType = AccessPhRecDly;
+        SaveDqs = FALSE;
+        break;
+      default:
+        AccessType = 0xFF;
+        break;
+      }
+      if (AccessType == 0xFF) {
+        if (MTPtr.attr == MTOverride) {
+          NBPtr->SetBitField (NBPtr, MTPtr.bfindex, MTPtr.data.s.value);
+        }
+        if (MTPtr.attr == MTSubtract) {
+          NBPtr->SetBitField (NBPtr, MTPtr.bfindex, NBPtr->GetBitField (NBPtr, MTPtr.bfindex) - MTPtr.data.s.value);
+        }
+        if (MTPtr.attr == MTAdd) {
+          NBPtr->SetBitField (NBPtr, MTPtr.bfindex, NBPtr->GetBitField (NBPtr, MTPtr.bfindex) + MTPtr.data.s.value);
+        }
+        if (MTPtr.attr == MTAnd) {
+          NBPtr->SetBitField (NBPtr, MTPtr.bfindex, (NBPtr->GetBitField (NBPtr, MTPtr.bfindex) & MTPtr.data.s.value));
+        }
+        if (MTPtr.attr == MTOr) {
+          NBPtr->SetBitField (NBPtr, MTPtr.bfindex, (NBPtr->GetBitField (NBPtr, MTPtr.bfindex) | MTPtr.data.s.value));
+        }
+      } else {
+        // Store the DQS data first
+        for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+          if (AccessType == AccessRdDqs__Dly) {
+            for (j = 0; j < MAX_NUMBER_LANES; j++) {
+              Temp2Val[i * MAX_NUMBER_LANES + j] = NBPtr->GetTrainDly (NBPtr, AccessType, DIMM_NBBL_ACCESS (i, j));
+            }
+          } else {
+            for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) {
+              TempVal[i * MAX_BYTELANES_PER_CHANNEL + j] = NBPtr->GetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i, j));
+            }
+          }
+        }
+        //
+        // Single Value with Bytleane mask option
+        //   Indicated by the vtype flag
+        //
+        if (MTPtr.vtype == VT_MSK_VALUE) {
+          // set the value which defined in Memory table.
+          for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+            ByteLane = MTPtr.data.s.bytelane;
+            if ((MTPtr.dimm == MTDIMMs) || (MTPtr.dimm == i)) {
+              if (AccessType == AccessRdDqs__Dly) {
+                for (j = 0; j < MAX_NUMBER_LANES; j++) {
+                  DqsOffset = (i * MAX_NUMBER_LANES + j);
+                  if ((ByteLane & (UINT16)1) != 0) {
+                    if (MTPtr.attr == MTOverride) {
+                      Temp2Val[DqsOffset] = (UINT16)MTPtr.data.s.value;
+                    }
+                    if (MTPtr.attr == MTSubtract) {
+                      Temp2Val[DqsOffset] -= (UINT16)MTPtr.data.s.value;
+                    }
+                    if (MTPtr.attr == MTAdd) {
+                      Temp2Val[DqsOffset] += (UINT16)MTPtr.data.s.value;
+                    }
+                    NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_NBBL_ACCESS (i, j), (UINT16)Temp2Val[DqsOffset]);
+                    if (SaveDqs) {
+                      if (DqsSavePtr == NULL) {
+                        NBPtr->ChannelPtr->RcvEnDlys[DqsOffset] = (UINT16)TempVal[DqsOffset];
+                      } else {
+                        DqsSavePtr[DqsOffset] = (UINT8)Temp2Val[DqsOffset];
+                      }
+                    }
+                  }
+                  ByteLane = ByteLane >> (UINT16)1;
+                }
+              } else {
+                for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) {
+                  DqsOffset = (i * MAX_BYTELANES_PER_CHANNEL + j);
+                  if ((ByteLane & (UINT16)1) != 0) {
+                    if (MTPtr.attr == MTOverride) {
+                      TempVal[DqsOffset] = (UINT16)MTPtr.data.s.value;
+                    }
+                    if (MTPtr.attr == MTSubtract) {
+                      TempVal[DqsOffset] -= (UINT16)MTPtr.data.s.value;
+                    }
+                    if (MTPtr.attr == MTAdd) {
+                      TempVal[DqsOffset] += (UINT16)MTPtr.data.s.value;
+                    }
+                    NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i, j), (UINT16)TempVal[DqsOffset]);
+                    if (SaveDqs) {
+                      if (DqsSavePtr == NULL) {
+                        NBPtr->ChannelPtr->RcvEnDlys[DqsOffset] = (UINT16)TempVal[DqsOffset];
+                      } else {
+                        DqsSavePtr[DqsOffset] = (UINT8)TempVal[DqsOffset];
+                      }
+                    }
+                  }
+                  ByteLane = ByteLane >> (UINT16)1;
+                }
+              }
+            }
+          }
+        } else {
+          // Multiple values specified in a byte array
+          for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+            if ((MTPtr.dimm == MTDIMMs) || (MTPtr.dimm == i)) {
+              if (AccessType == AccessRdDqs__Dly) {
+                for (j = 0; j < MAX_NUMBER_LANES; j++) {
+                  DqsOffset = (i * MAX_NUMBER_LANES + j);
+                  if (MTPtr.attr == MTOverride) {
+                    Temp2Val[DqsOffset] = MTPtr.data.bytelanevalue[j];
+                  }
+                  if (MTPtr.attr == MTSubtract) {
+                    Temp2Val[DqsOffset] -= MTPtr.data.bytelanevalue[j];
+                  }
+                  if (MTPtr.attr == MTAdd) {
+                    Temp2Val[DqsOffset] += MTPtr.data.bytelanevalue[j];
+                  }
+                  NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_NBBL_ACCESS (i, j), (UINT16)Temp2Val[DqsOffset]);
+                  if (SaveDqs) {
+                    if (DqsSavePtr == NULL) {
+                      NBPtr->ChannelPtr->RcvEnDlys[DqsOffset] = (UINT16)Temp2Val[DqsOffset];
+                    } else {
+                      DqsSavePtr[DqsOffset] = (UINT8)Temp2Val[DqsOffset];
+                    }
+                  }
+                }
+              } else {
+                for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) {
+                  DqsOffset = (i * MAX_BYTELANES_PER_CHANNEL + j);
+                  if (MTPtr.attr == MTOverride) {
+                    TempVal[DqsOffset] = MTPtr.data.bytelanevalue[j];
+                  }
+                  if (MTPtr.attr == MTSubtract) {
+                    TempVal[DqsOffset] -= MTPtr.data.bytelanevalue[j];
+                  }
+                  if (MTPtr.attr == MTAdd) {
+                    TempVal[DqsOffset] += MTPtr.data.bytelanevalue[j];
+                  }
+                  NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i, j), (UINT16)TempVal[DqsOffset]);
+                  if (SaveDqs) {
+                    if (DqsSavePtr == NULL) {
+                      NBPtr->ChannelPtr->RcvEnDlys[DqsOffset] = (UINT16)TempVal[DqsOffset];
+                    } else {
+                      DqsSavePtr[DqsOffset] = (UINT8)TempVal[DqsOffset];
+                    }
+                  }
+                }
+              }
+            }
+          }
+        }
+        // set the DQS value to left DIMMs.
+        i = MTPtr.dimm;
+        while ((i != MTDIMMs) && ((++i) < MAX_DIMMS_PER_CHANNEL)) {
+          if (AccessType == AccessRdDqs__Dly) {
+            for (j = 0; j < MAX_NUMBER_LANES; j++) {
+              NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_NBBL_ACCESS (i, j), (UINT16)Temp2Val[i * MAX_BYTELANES_PER_CHANNEL + j]);
+            }
+          } else {
+            for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) {
+              NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i, j), (UINT16)TempVal[i * MAX_BYTELANES_PER_CHANNEL + j]);
+            }
+          }
+        }
+      }
+    }
+  }
+}
+
+
+
+
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/C32/mmflowC32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/C32/mmflowC32.c
new file mode 100644
index 0000000000..9c295ed1ed
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/C32/mmflowC32.c
@@ -0,0 +1,380 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmflowC32.c
+ *
+ * Main Memory initialization sequence for C32
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main/C32)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnc32.h"
+#include "mt.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_C32_MMFLOWC32_FILECODE
+/* features */
+#include "mftds.h"
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+MemMFlowC32 (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function defines the memory initialization flow for
+ *      systems that only support C32 processors.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemMFlowC32 (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  UINT8   NodeCnt;
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_TECH_BLOCK *TechPtr;
+  MEM_DATA_STRUCT *MemPtr;
+
+  NBPtr = MemMainPtr->NBPtr;
+  TechPtr = MemMainPtr->TechPtr;
+  NodeCnt = MemMainPtr->DieCount;
+  MemPtr = MemMainPtr->MemPtr;
+
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[BSP_DIE].SocketId, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedC32 (NBPtr, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid))) {
+    MemPtr->IsFlowControlSupported = FALSE;
+    return AGESA_FATAL;
+  } else {
+    MemPtr->IsFlowControlSupported = TRUE;
+  }
+
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeInitializeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Initialize MCT
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitializeMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].InitializeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Low voltage DDR3
+  //----------------------------------------------------------------
+  // Levelize DDR3 voltage based on socket, as each socket has its own voltage for dimms.
+  AGESA_TESTPOINT (TpProcMemLvDdr3, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.LvDDR3 (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Initialize DRAM and DCTs, and Create Memory Map
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    // Initialize Memory Controller and Dram
+    IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Node);
+    if (!NBPtr[Node].InitMCT (&NBPtr[Node])) {
+      return AGESA_FATAL; //fatalexit
+    }
+
+    // Create memory map
+    AGESA_TESTPOINT (TpProcMemSystemMemoryMapping, &(MemMainPtr->MemPtr->StdHeader));
+    if (!NBPtr[Node].HtMemMapInit (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------
+  // If there is no dimm on the system, do fatal exit
+  //----------------------------------------------------
+  if (NBPtr[BSP_DIE].RefPtr->SysLimit == 0) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM, 0, 0, 0, 0, &(MemMainPtr->MemPtr->StdHeader));
+    ASSERT (FALSE);
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Synchronize DCTs
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSynchronizeDcts, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].SyncDctsReady (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // CpuMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMtrrConfiguration, &(MemMainPtr->MemPtr->StdHeader));
+  if (!NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE])) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Before Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeTrn);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Restore
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemRestore (MemMainPtr)) {
+    // Do DQS training only if memory context restore fails
+
+    //----------------------------------------------------------------
+    // Training
+    //----------------------------------------------------------------
+    MemMainPtr->mmSharedPtr->DimmExcludeFlag = TRAINING;
+    AGESA_TESTPOINT (TpProcMemDramTraining, &(MemMainPtr->MemPtr->StdHeader));
+    IDS_SKIP_HOOK (IDS_BEFORE_DQS_TRAINING, MemMainPtr, &(MemMainPtr->MemPtr->StdHeader)) {
+      if (!MemFeatMain.Training (MemMainPtr)) {
+        return AGESA_FATAL;
+      }
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd DQS training\n\n");
+  }
+
+  //----------------------------------------------------------------
+  // Disable chipselects that fail training
+  //----------------------------------------------------------------
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = END_TRAINING;
+  MemFeatMain.ExcludeDIMM (MemMainPtr);
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = NORMAL;
+
+  //----------------------------------------------------------------
+  // OtherTiming
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemOtherTiming, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].OtherTiming (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterTrn);
+  }
+
+  //----------------------------------------------------------------
+  // SetDqsEccTimings
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSetDqsEccTmgs, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!TechPtr[Node].SetDqsEccTmgs (&TechPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Online Spare
+  //----------------------------------------------------------------
+  if (!MemFeatMain.OnlineSpare (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave banks
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveBanks (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Interleave Nodes
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InterleaveNodes (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave channels
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveChannels (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Programming Interleave registers
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterInterleave);
+  }
+
+  //----------------------------------------------------------------
+  // UMA Allocation & UMAMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemUMAMemTyping, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.UmaAllocation (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  // ECC
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InitEcc (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Memory Clear
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMemClr, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.MemClr (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // OnDimm Thermal
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->OnDimmThermal (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].FinalizeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterFinalizeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Save
+  //----------------------------------------------------------------
+  MemFeatMain.MemSave (MemMainPtr);
+
+  //----------------------------------------------------------------
+  // Memory DMI support
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemDmi (MemMainPtr)) {
+    return AGESA_CRITICAL;
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/DA/mmflowda.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/DA/mmflowda.c
new file mode 100644
index 0000000000..2ab0347ac6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/DA/mmflowda.c
@@ -0,0 +1,382 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmflowda.c
+ *
+ * Main Memory initialization sequence for DA
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main/DA)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnda.h"
+#include "mt.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_DA_MMFLOWDA_FILECODE
+/* features */
+#include "mftds.h"
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function defines the memory initialization flow for
+ *      systems that only support RB processors.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemMFlowDA (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  UINT8   NodeCnt;
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_TECH_BLOCK *TechPtr;
+  MEM_DATA_STRUCT *MemPtr;
+
+  NBPtr = MemMainPtr->NBPtr;
+  TechPtr = MemMainPtr->TechPtr;
+  NodeCnt = MemMainPtr->DieCount;
+  MemPtr = MemMainPtr->MemPtr;
+
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[BSP_DIE].SocketId, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedDA (NBPtr, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid))) {
+    MemPtr->IsFlowControlSupported = FALSE;
+    return AGESA_FATAL;
+  } else {
+    MemPtr->IsFlowControlSupported = TRUE;
+  }
+
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeInitializeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Initialize MCT
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitializeMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].InitializeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Low voltage DDR3
+  //----------------------------------------------------------------
+  // Levelize DDR3 voltage based on socket, as each socket has its own voltage for dimms.
+  AGESA_TESTPOINT (TpProcMemLvDdr3, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.LvDDR3 (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Initialize DRAM and DCTs, and Create Memory Map
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    // Initialize Memory Controller and Dram
+    IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Node);
+
+    if (!NBPtr[Node].InitMCT (&NBPtr[Node])) {
+      return AGESA_FATAL; // fatalexit
+    }
+
+    // Create memory map
+    AGESA_TESTPOINT (TpProcMemSystemMemoryMapping, &(MemMainPtr->MemPtr->StdHeader));
+    if (!NBPtr[Node].HtMemMapInit (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------
+  // If there is no dimm on the system, do fatal exit
+  //----------------------------------------------------
+  if (NBPtr[BSP_DIE].RefPtr->SysLimit == 0) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM, 0, 0, 0, 0, &(MemMainPtr->MemPtr->StdHeader));
+    ASSERT (FALSE);
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Synchronize DCTs
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSynchronizeDcts, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].SyncDctsReady (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // CpuMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMtrrConfiguration, &(MemMainPtr->MemPtr->StdHeader));
+  if (!NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE])) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Before Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeTrn);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Restore
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemRestore (MemMainPtr)) {
+    // Do DQS training only if memory context restore fails
+
+    //----------------------------------------------------------------
+    // Training
+    //----------------------------------------------------------------
+    MemMainPtr->mmSharedPtr->DimmExcludeFlag = TRAINING;
+    AGESA_TESTPOINT (TpProcMemDramTraining, &(MemMainPtr->MemPtr->StdHeader));
+    IDS_SKIP_HOOK (IDS_BEFORE_DQS_TRAINING, MemMainPtr, &(MemMainPtr->MemPtr->StdHeader)) {
+      if (!MemFeatMain.Training (MemMainPtr)) {
+        return AGESA_FATAL;
+      }
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd DQS training\n\n");
+  }
+
+  //----------------------------------------------------------------
+  // Disable chipselects that fail training
+  //----------------------------------------------------------------
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = END_TRAINING;
+  MemFeatMain.ExcludeDIMM (MemMainPtr);
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = NORMAL;
+
+  //----------------------------------------------------------------
+  // OtherTiming
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemOtherTiming, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].OtherTiming (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterTrn);
+  }
+
+  //----------------------------------------------------------------
+  // SetDqsEccTimings
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSetDqsEccTmgs, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!TechPtr[Node].SetDqsEccTmgs (&TechPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Online Spare
+  //----------------------------------------------------------------
+  if (!MemFeatMain.OnlineSpare (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave banks
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveBanks (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Interleave Nodes
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InterleaveNodes (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave channels
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveChannels (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Programming Interleave registers
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterInterleave);
+  }
+
+  //----------------------------------------------------------------
+  // UMA Allocation & UMAMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemUMAMemTyping, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.UmaAllocation (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave region
+  //----------------------------------------------------------------
+  NBPtr[BSP_DIE].FeatPtr->InterleaveRegion (&NBPtr[BSP_DIE]);
+
+  //----------------------------------------------------------------
+  // ECC
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InitEcc (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Memory Clear
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMemClr, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.MemClr (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // OnDimm Thermal
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->OnDimmThermal (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].FinalizeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterFinalizeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Save
+  //----------------------------------------------------------------
+  MemFeatMain.MemSave (MemMainPtr);
+
+  //----------------------------------------------------------------
+  // Memory DMI support
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemDmi (MemMainPtr)) {
+    return AGESA_CRITICAL;
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/DR/mmflowdr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/DR/mmflowdr.c
new file mode 100644
index 0000000000..086daf4ef4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/DR/mmflowdr.c
@@ -0,0 +1,376 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmflowdr.c
+ *
+ * Main Memory initialization sequence for DR
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main/DR)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mndr.h"
+#include "mt.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_DR_MMFLOWDR_FILECODE
+/* features */
+#include "mftds.h"
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function defines the memory initialization flow for
+ *      systems that only support RB processors.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemMFlowDr (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  UINT8   NodeCnt;
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_TECH_BLOCK *TechPtr;
+  MEM_DATA_STRUCT *MemPtr;
+
+  NBPtr = MemMainPtr->NBPtr;
+  TechPtr = MemMainPtr->TechPtr;
+  NodeCnt = MemMainPtr->DieCount;
+  MemPtr = MemMainPtr->MemPtr;
+
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[BSP_DIE].SocketId, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedDr (NBPtr, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid))) {
+    MemPtr->IsFlowControlSupported = FALSE;
+    return AGESA_FATAL;
+  } else {
+    MemPtr->IsFlowControlSupported = TRUE;
+  }
+
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeInitializeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Initialize MCT
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitializeMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].InitializeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Low voltage DDR3
+  //----------------------------------------------------------------
+  // Levelize DDR3 voltage based on socket, as each socket has its own voltage for dimms.
+  AGESA_TESTPOINT (TpProcMemLvDdr3, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.LvDDR3 (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Initialize DRAM and DCTs, and Create Memory Map
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    // Initialize Memory Controller and Dram
+    IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Node);
+
+    if (!NBPtr[Node].InitMCT (&NBPtr[Node])) {
+      return AGESA_FATAL; //fatalexit
+    }
+
+    // Create memory map
+    AGESA_TESTPOINT (TpProcMemSystemMemoryMapping, &(MemMainPtr->MemPtr->StdHeader));
+    if (!NBPtr[Node].HtMemMapInit (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------
+  // If there is no dimm on the system, do fatal exit
+  //----------------------------------------------------
+  if (NBPtr[BSP_DIE].RefPtr->SysLimit == 0) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM, 0, 0, 0, 0, &(MemMainPtr->MemPtr->StdHeader));
+    ASSERT (FALSE);
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Synchronize DCTs
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSynchronizeDcts, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].SyncDctsReady (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // CpuMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMtrrConfiguration, &(MemMainPtr->MemPtr->StdHeader));
+  if (!NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE])) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Before Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeTrn);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Restore
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemRestore (MemMainPtr)) {
+    // Do DQS training only if memory context restore fails
+
+    //----------------------------------------------------------------
+    // Training
+    //----------------------------------------------------------------
+    AGESA_TESTPOINT (TpProcMemDramTraining, &(MemMainPtr->MemPtr->StdHeader));
+    MemMainPtr->mmSharedPtr->DimmExcludeFlag = TRAINING;
+    IDS_SKIP_HOOK (IDS_BEFORE_DQS_TRAINING, MemMainPtr, &(MemMainPtr->MemPtr->StdHeader)) {
+      if (!MemFeatMain.Training (MemMainPtr)) {
+        return AGESA_FATAL;
+      }
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd DQS training\n\n");
+  }
+
+  //----------------------------------------------------------------
+  // Disable chipselects that fail training
+  //----------------------------------------------------------------
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = END_TRAINING;
+  MemFeatMain.ExcludeDIMM (MemMainPtr);
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = NORMAL;
+
+  //----------------------------------------------------------------
+  // OtherTiming
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemOtherTiming, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].OtherTiming (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterTrn);
+  }
+
+  //----------------------------------------------------------------
+  // SetDqsEccTimings
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSetDqsEccTmgs, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!TechPtr[Node].SetDqsEccTmgs (&TechPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Online Spare
+  //----------------------------------------------------------------
+  if (!MemFeatMain.OnlineSpare (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave banks
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveBanks (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Interleave Nodes
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InterleaveNodes (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave channels
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveChannels (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Programming Interleave registers
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterInterleave);
+  }
+
+  //----------------------------------------------------------------
+  // UMA Allocation & UMAMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemUMAMemTyping, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.UmaAllocation (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  // ECC
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InitEcc (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Memory Clear
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMemClr, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.MemClr (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // OnDimm Thermal
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->OnDimmThermal (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].FinalizeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterFinalizeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Save
+  //----------------------------------------------------------------
+  MemFeatMain.MemSave (MemMainPtr);
+
+  //----------------------------------------------------------------
+  // Memory DMI support
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemDmi (MemMainPtr)) {
+    return AGESA_CRITICAL;
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/HY/mmflowhy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/HY/mmflowhy.c
new file mode 100644
index 0000000000..915000c241
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/HY/mmflowhy.c
@@ -0,0 +1,380 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmflowhy.c
+ *
+ * Main Memory initialization sequence for HY
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main/HY)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnhy.h"
+#include "mt.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_HY_MMFLOWHY_FILECODE
+/* features */
+#include "mftds.h"
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+MemMFlowHy (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function defines the memory initialization flow for
+ *      systems that only support HY processors.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemMFlowHy (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  UINT8   NodeCnt;
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_TECH_BLOCK *TechPtr;
+  MEM_DATA_STRUCT *MemPtr;
+
+  NBPtr = MemMainPtr->NBPtr;
+  TechPtr = MemMainPtr->TechPtr;
+  NodeCnt = MemMainPtr->DieCount;
+  MemPtr = MemMainPtr->MemPtr;
+
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[BSP_DIE].SocketId, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedHy (NBPtr, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid))) {
+    MemPtr->IsFlowControlSupported = FALSE;
+    return AGESA_FATAL;
+  } else {
+    MemPtr->IsFlowControlSupported = TRUE;
+  }
+
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeInitializeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Initialize MCT
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitializeMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].InitializeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Low voltage DDR3
+  //----------------------------------------------------------------
+  // Levelize DDR3 voltage based on socket, as each socket has its own voltage for dimms.
+  AGESA_TESTPOINT (TpProcMemLvDdr3, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.LvDDR3 (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Initialize DRAM and DCTs, and Create Memory Map
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    // Initialize Memory Controller and Dram
+    IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Node);
+    if (!NBPtr[Node].InitMCT (&NBPtr[Node])) {
+      return AGESA_FATAL; //fatalexit
+    }
+
+    // Create memory map
+    AGESA_TESTPOINT (TpProcMemSystemMemoryMapping, &(MemMainPtr->MemPtr->StdHeader));
+    if (!NBPtr[Node].HtMemMapInit (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------
+  // If there is no dimm on the system, do fatal exit
+  //----------------------------------------------------
+  if (NBPtr[BSP_DIE].RefPtr->SysLimit == 0) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM, 0, 0, 0, 0, &(MemMainPtr->MemPtr->StdHeader));
+    ASSERT (FALSE);
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Synchronize DCTs
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSynchronizeDcts, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].SyncDctsReady (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // CpuMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMtrrConfiguration, &(MemMainPtr->MemPtr->StdHeader));
+  if (!NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE])) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Before Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeTrn);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Restore
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemRestore (MemMainPtr)) {
+    // Do DQS training only if memory context restore fails
+
+    //----------------------------------------------------------------
+    // Training
+    //----------------------------------------------------------------
+    MemMainPtr->mmSharedPtr->DimmExcludeFlag = TRAINING;
+    AGESA_TESTPOINT (TpProcMemDramTraining, &(MemMainPtr->MemPtr->StdHeader));
+    IDS_SKIP_HOOK (IDS_BEFORE_DQS_TRAINING, MemMainPtr, &(MemMainPtr->MemPtr->StdHeader)) {
+      if (!MemFeatMain.Training (MemMainPtr)) {
+        return AGESA_FATAL;
+      }
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd DQS training\n\n");
+  }
+
+  //----------------------------------------------------------------
+  // Disable chipselects that fail training
+  //----------------------------------------------------------------
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = END_TRAINING;
+  MemFeatMain.ExcludeDIMM (MemMainPtr);
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = NORMAL;
+
+  //----------------------------------------------------------------
+  // OtherTiming
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemOtherTiming, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].OtherTiming (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterTrn);
+  }
+
+  //----------------------------------------------------------------
+  // SetDqsEccTimings
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSetDqsEccTmgs, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!TechPtr[Node].SetDqsEccTmgs (&TechPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Online Spare
+  //----------------------------------------------------------------
+  if (!MemFeatMain.OnlineSpare (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave banks
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveBanks (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Interleave Nodes
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InterleaveNodes (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave channels
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveChannels (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Programming Interleave registers
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterInterleave);
+  }
+
+  //----------------------------------------------------------------
+  // UMA Allocation & UMAMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemUMAMemTyping, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.UmaAllocation (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  // ECC
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InitEcc (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Memory Clear
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMemClr, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.MemClr (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // OnDimm Thermal
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->OnDimmThermal (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].FinalizeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterFinalizeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Save
+  //----------------------------------------------------------------
+  MemFeatMain.MemSave (MemMainPtr);
+
+  //----------------------------------------------------------------
+  // Memory DMI support
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemDmi (MemMainPtr)) {
+    return AGESA_CRITICAL;
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/OR/mmflowor.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/OR/mmflowor.c
new file mode 100644
index 0000000000..090efa9898
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/OR/mmflowor.c
@@ -0,0 +1,423 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmflowor.c
+ *
+ * Main Memory initialization sequence for OR
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main/OR)
+ * @e \$Revision: 54925 $ @e \$Date: 2011-06-14 09:05:43 -0600 (Tue, 14 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnor.h"
+#include "mt.h"
+#include "mmLvDdr3.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_MAIN_OR_MMFLOWOR_FILECODE
+/* features */
+#include "mftds.h"
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+MemMFlowOr (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function defines the memory initialization flow for
+ *      systems that only support OR processors.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemMFlowOr (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  UINT8   NodeCnt;
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_TECH_BLOCK *TechPtr;
+  MEM_DATA_STRUCT *MemPtr;
+  ID_INFO CallOutIdInfo;
+
+  NBPtr = MemMainPtr->NBPtr;
+  TechPtr = MemMainPtr->TechPtr;
+  NodeCnt = MemMainPtr->DieCount;
+  MemPtr = MemMainPtr->MemPtr;
+
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[BSP_DIE].SocketId, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedOr (NBPtr, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid))) {
+    MemPtr->IsFlowControlSupported = FALSE;
+    return AGESA_FATAL;
+  } else {
+    MemPtr->IsFlowControlSupported = TRUE;
+  }
+
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeInitializeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Initialize MCT
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitializeMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].InitializeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Low voltage DDR3
+  //----------------------------------------------------------------
+  // Levelize DDR3 voltage based on socket, as each socket has its own voltage for dimms.
+  AGESA_TESTPOINT (TpProcMemLvDdr3, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.LvDDR3 (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Initialize DRAM and DCTs
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    // Initialize Memory Controller and Dram
+    IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Node);
+    if (!NBPtr[Node].InitMCT (&NBPtr[Node])) {
+      return AGESA_FATAL; //fatalexit
+    }
+
+    MemFInitTableDrive (NBPtr, MTBeforeDInit);
+  }
+
+  //------------------------------------------------
+  // Finalize target frequency
+  //------------------------------------------------
+  if (!MemMLvDdr3PerformanceEnhFinalize (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //------------------------------------------------
+  // Callout before Dram Init
+  //------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeDramInit, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node ++) {
+    CallOutIdInfo.IdField.SocketId = NBPtr[Node].MCTPtr->SocketId;
+    CallOutIdInfo.IdField.ModuleId = NBPtr[Node].MCTPtr->DieId;
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nCalling out to Platform BIOS on Socket %d Module %d...\n", CallOutIdInfo.IdField.SocketId, CallOutIdInfo.IdField.ModuleId);
+    AgesaHookBeforeDramInit ((UINTN) CallOutIdInfo.IdInformation, MemMainPtr->MemPtr);
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nVDDIO = 1.%dV\n", (NBPtr[Node].RefPtr->DDR3Voltage == VOLT1_5) ? 5 :
+                                        (NBPtr[Node].RefPtr->DDR3Voltage == VOLT1_35) ? 35 :
+                                        (NBPtr[Node].RefPtr->DDR3Voltage == VOLT1_25) ? 25 : 999);
+  }
+  AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeDramInit, &(NBPtr->MemPtr->StdHeader));
+
+  //-------------------------------------------------
+  // Do dram init and create memory map
+  //-------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    IDS_OPTION_HOOK (IDS_BEFORE_DRAM_INIT, &NBPtr[Node], &(MemMainPtr->MemPtr->StdHeader));
+    NBPtr[Node].StartupDCT (&NBPtr[Node]);
+
+    // Create memory map
+    AGESA_TESTPOINT (TpProcMemSystemMemoryMapping, &(MemMainPtr->MemPtr->StdHeader));
+    if (!NBPtr[Node].HtMemMapInit (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------
+  // If there is no dimm on the system, do fatal exit
+  //----------------------------------------------------
+  if (NBPtr[BSP_DIE].RefPtr->SysLimit == 0) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM, 0, 0, 0, 0, &(MemMainPtr->MemPtr->StdHeader));
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Synchronize DCTs
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSynchronizeDcts, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].SyncDctsReady (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // CpuMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMtrrConfiguration, &(MemMainPtr->MemPtr->StdHeader));
+  if (!NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE])) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Before Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeTrn);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Restore
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemRestore (MemMainPtr)) {
+    // Do DQS training only if memory context restore fails
+
+    //----------------------------------------------------------------
+    // Training
+    //----------------------------------------------------------------
+    MemMainPtr->mmSharedPtr->DimmExcludeFlag = TRAINING;
+    AGESA_TESTPOINT (TpProcMemDramTraining, &(MemMainPtr->MemPtr->StdHeader));
+    IDS_SKIP_HOOK (IDS_BEFORE_DQS_TRAINING, MemMainPtr, &(MemMainPtr->MemPtr->StdHeader)) {
+      if (!MemFeatMain.Training (MemMainPtr)) {
+        return AGESA_FATAL;
+      }
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd DQS training\n\n");
+  }
+
+  //----------------------------------------------------------------
+  // Disable chipselects that fail training
+  //----------------------------------------------------------------
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = END_TRAINING;
+  MemFeatMain.ExcludeDIMM (MemMainPtr);
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = NORMAL;
+
+  //----------------------------------------------------------------
+  // OtherTiming
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemOtherTiming, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].OtherTiming (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd Non-SPD Timings.\n");
+
+  //----------------------------------------------------------------
+  // After Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterTrn);
+  }
+
+  //----------------------------------------------------------------
+  // Online Spare
+  //----------------------------------------------------------------
+  if (!MemFeatMain.OnlineSpare (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave banks
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveBanks (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Interleave Nodes
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InterleaveNodes (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave channels
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveChannels (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Programming Interleave registers
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterInterleave);
+  }
+
+  // ECC
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InitEcc (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Memory Clear
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMemClr, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.MemClr (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // C6 Storage Allocation
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    NBPtr[Node].AllocateC6Storage (&NBPtr[Node]);
+  }
+
+  //----------------------------------------------------------------
+  // UMA Allocation & UMAMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemUMAMemTyping, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.UmaAllocation (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave region
+  //----------------------------------------------------------------
+  NBPtr[BSP_DIE].FeatPtr->InterleaveRegion (&NBPtr[BSP_DIE]);
+
+  //----------------------------------------------------------------
+  // OnDimm Thermal
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->OnDimmThermal (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].FinalizeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterFinalizeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Save
+  //----------------------------------------------------------------
+  MemFeatMain.MemSave (MemMainPtr);
+
+  //----------------------------------------------------------------
+  // Memory DMI support
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemDmi (MemMainPtr)) {
+    return AGESA_CRITICAL;
+  }
+
+  //----------------------------------------------------------------
+  // Switch back to DCT 0 before sending control back
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node ++) {
+    NBPtr[Node].SwitchDCT (&NBPtr[Node], 0);
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/PH/mmflowPh.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/PH/mmflowPh.c
new file mode 100644
index 0000000000..2fe9984257
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/PH/mmflowPh.c
@@ -0,0 +1,382 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmflowPh.c
+ *
+ * Main Memory initialization sequence for PH
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main/PH)
+ * @e \$Revision: 60400 $ @e \$Date: 2011-10-14 00:40:33 -0600 (Fri, 14 Oct 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnPh.h"
+#include "mt.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_PH_MMFLOWPH_FILECODE
+/* features */
+#include "mftds.h"
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function defines the memory initialization flow for
+ *      systems that only support PH processors.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemMFlowPh (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  UINT8   NodeCnt;
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_TECH_BLOCK *TechPtr;
+  MEM_DATA_STRUCT *MemPtr;
+
+  NBPtr = MemMainPtr->NBPtr;
+  TechPtr = MemMainPtr->TechPtr;
+  NodeCnt = MemMainPtr->DieCount;
+  MemPtr = MemMainPtr->MemPtr;
+
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[BSP_DIE].SocketId, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedPh (NBPtr, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid))) {
+    MemPtr->IsFlowControlSupported = FALSE;
+    return AGESA_FATAL;
+  } else {
+    MemPtr->IsFlowControlSupported = TRUE;
+  }
+
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeInitializeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Initialize MCT
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitializeMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].InitializeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Low voltage DDR3
+  //----------------------------------------------------------------
+  // Levelize DDR3 voltage based on socket, as each socket has its own voltage for dimms.
+  AGESA_TESTPOINT (TpProcMemLvDdr3, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.LvDDR3 (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Initialize DRAM and DCTs, and Create Memory Map
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    // Initialize Memory Controller and Dram
+    IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Node);
+
+    if (!NBPtr[Node].InitMCT (&NBPtr[Node])) {
+      return AGESA_FATAL; // fatalexit
+    }
+
+    // Create memory map
+    AGESA_TESTPOINT (TpProcMemSystemMemoryMapping, &(MemMainPtr->MemPtr->StdHeader));
+    if (!NBPtr[Node].HtMemMapInit (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------
+  // If there is no dimm on the system, do fatal exit
+  //----------------------------------------------------
+  if (NBPtr[BSP_DIE].RefPtr->SysLimit == 0) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM, 0, 0, 0, 0, &(MemMainPtr->MemPtr->StdHeader));
+    ASSERT (FALSE);
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Synchronize DCTs
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSynchronizeDcts, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].SyncDctsReady (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // CpuMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMtrrConfiguration, &(MemMainPtr->MemPtr->StdHeader));
+  if (!NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE])) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Before Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeTrn);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Restore
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemRestore (MemMainPtr)) {
+    // Do DQS training only if memory context restore fails
+
+    //----------------------------------------------------------------
+    // Training
+    //----------------------------------------------------------------
+    MemMainPtr->mmSharedPtr->DimmExcludeFlag = TRAINING;
+    AGESA_TESTPOINT (TpProcMemDramTraining, &(MemMainPtr->MemPtr->StdHeader));
+    IDS_SKIP_HOOK (IDS_BEFORE_DQS_TRAINING, MemMainPtr, &(MemMainPtr->MemPtr->StdHeader)) {
+      if (!MemFeatMain.Training (MemMainPtr)) {
+        return AGESA_FATAL;
+      }
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd DQS training\n\n");
+  }
+
+  //----------------------------------------------------------------
+  // Disable chipselects that fail training
+  //----------------------------------------------------------------
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = END_TRAINING;
+  MemFeatMain.ExcludeDIMM (MemMainPtr);
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = NORMAL;
+
+  //----------------------------------------------------------------
+  // OtherTiming
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemOtherTiming, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].OtherTiming (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterTrn);
+  }
+
+  //----------------------------------------------------------------
+  // SetDqsEccTimings
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSetDqsEccTmgs, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!TechPtr[Node].SetDqsEccTmgs (&TechPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Online Spare
+  //----------------------------------------------------------------
+  if (!MemFeatMain.OnlineSpare (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave banks
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveBanks (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Interleave Nodes
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InterleaveNodes (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave channels
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveChannels (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Programming Interleave registers
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterInterleave);
+  }
+
+  //----------------------------------------------------------------
+  // UMA Allocation & UMAMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemUMAMemTyping, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.UmaAllocation (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // ECC
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InitEcc (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Memory Clear
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMemClr, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.MemClr (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave region
+  //----------------------------------------------------------------
+  NBPtr[BSP_DIE].FeatPtr->InterleaveRegion (&NBPtr[BSP_DIE]);
+
+  //----------------------------------------------------------------
+  // OnDimm Thermal
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->OnDimmThermal (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].FinalizeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterFinalizeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Save
+  //----------------------------------------------------------------
+  MemFeatMain.MemSave (MemMainPtr);
+
+  //----------------------------------------------------------------
+  // Memory DMI support
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemDmi (MemMainPtr)) {
+    return AGESA_CRITICAL;
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/RB/mmflowRb.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/RB/mmflowRb.c
new file mode 100644
index 0000000000..0565de37fa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/RB/mmflowRb.c
@@ -0,0 +1,382 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmflowRb.c
+ *
+ * Main Memory initialization sequence for RB
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main/RB)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnRb.h"
+#include "mt.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_RB_MMFLOWRB_FILECODE
+/* features */
+#include "mftds.h"
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function defines the memory initialization flow for
+ *      systems that only support RB processors.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemMFlowRb (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  UINT8   NodeCnt;
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_TECH_BLOCK *TechPtr;
+  MEM_DATA_STRUCT *MemPtr;
+
+  NBPtr = MemMainPtr->NBPtr;
+  TechPtr = MemMainPtr->TechPtr;
+  NodeCnt = MemMainPtr->DieCount;
+  MemPtr = MemMainPtr->MemPtr;
+
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[BSP_DIE].SocketId, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedRb (NBPtr, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid))) {
+    MemPtr->IsFlowControlSupported = FALSE;
+    return AGESA_FATAL;
+  } else {
+    MemPtr->IsFlowControlSupported = TRUE;
+  }
+
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeInitializeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Initialize MCT
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitializeMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].InitializeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Low voltage DDR3
+  //----------------------------------------------------------------
+  // Levelize DDR3 voltage based on socket, as each socket has its own voltage for dimms.
+  AGESA_TESTPOINT (TpProcMemLvDdr3, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.LvDDR3 (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Initialize DRAM and DCTs, and Create Memory Map
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemInitMCT, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    // Initialize Memory Controller and Dram
+    IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Node);
+
+    if (!NBPtr[Node].InitMCT (&NBPtr[Node])) {
+      return AGESA_FATAL; // fatalexit
+    }
+
+    // Create memory map
+    AGESA_TESTPOINT (TpProcMemSystemMemoryMapping, &(MemMainPtr->MemPtr->StdHeader));
+    if (!NBPtr[Node].HtMemMapInit (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------
+  // If there is no dimm on the system, do fatal exit
+  //----------------------------------------------------
+  if (NBPtr[BSP_DIE].RefPtr->SysLimit == 0) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM, 0, 0, 0, 0, &(MemMainPtr->MemPtr->StdHeader));
+    ASSERT (FALSE);
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Synchronize DCTs
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSynchronizeDcts, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].SyncDctsReady (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // CpuMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMtrrConfiguration, &(MemMainPtr->MemPtr->StdHeader));
+  if (!NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE])) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Before Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTBeforeTrn);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Restore
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemRestore (MemMainPtr)) {
+    // Do DQS training only if memory context restore fails
+
+    //----------------------------------------------------------------
+    // Training
+    //----------------------------------------------------------------
+    MemMainPtr->mmSharedPtr->DimmExcludeFlag = TRAINING;
+    AGESA_TESTPOINT (TpProcMemDramTraining, &(MemMainPtr->MemPtr->StdHeader));
+    IDS_SKIP_HOOK (IDS_BEFORE_DQS_TRAINING, MemMainPtr, &(MemMainPtr->MemPtr->StdHeader)) {
+      if (!MemFeatMain.Training (MemMainPtr)) {
+        return AGESA_FATAL;
+      }
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd DQS training\n\n");
+  }
+
+  //----------------------------------------------------------------
+  // Disable chipselects that fail training
+  //----------------------------------------------------------------
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = END_TRAINING;
+  MemFeatMain.ExcludeDIMM (MemMainPtr);
+  MemMainPtr->mmSharedPtr->DimmExcludeFlag = NORMAL;
+
+  //----------------------------------------------------------------
+  // OtherTiming
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemOtherTiming, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].OtherTiming (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Training Table values
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterTrn);
+  }
+
+  //----------------------------------------------------------------
+  // SetDqsEccTimings
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemSetDqsEccTmgs, &(MemMainPtr->MemPtr->StdHeader));
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!TechPtr[Node].SetDqsEccTmgs (&TechPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Online Spare
+  //----------------------------------------------------------------
+  if (!MemFeatMain.OnlineSpare (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave banks
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveBanks (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Interleave Nodes
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InterleaveNodes (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave channels
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->InterleaveChannels (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Programming Interleave registers
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterInterleave);
+  }
+
+  //----------------------------------------------------------------
+  // UMA Allocation & UMAMemTyping
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemUMAMemTyping, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.UmaAllocation (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Interleave region
+  //----------------------------------------------------------------
+  NBPtr[BSP_DIE].FeatPtr->InterleaveRegion (&NBPtr[BSP_DIE]);
+
+  //----------------------------------------------------------------
+  // ECC
+  //----------------------------------------------------------------
+  if (!MemFeatMain.InitEcc (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // Memory Clear
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemMemClr, &(MemMainPtr->MemPtr->StdHeader));
+  if (!MemFeatMain.MemClr (MemMainPtr)) {
+    return AGESA_FATAL;
+  }
+
+  //----------------------------------------------------------------
+  // OnDimm Thermal
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (NBPtr[Node].FeatPtr->OnDimmThermal (&NBPtr[Node])) {
+      if (NBPtr[Node].MCTPtr->ErrCode == AGESA_FATAL) {
+        return AGESA_FATAL;
+      }
+    }
+  }
+
+  //----------------------------------------------------------------
+  // Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    if (!NBPtr[Node].FinalizeMCT (&NBPtr[Node])) {
+      return AGESA_FATAL;
+    }
+  }
+
+  //----------------------------------------------------------------
+  // After Finalize MCT
+  //----------------------------------------------------------------
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFInitTableDrive (&NBPtr[Node], MTAfterFinalizeMCT);
+  }
+
+  //----------------------------------------------------------------
+  // Memory Context Save
+  //----------------------------------------------------------------
+  MemFeatMain.MemSave (MemMainPtr);
+
+  //----------------------------------------------------------------
+  // Memory DMI support
+  //----------------------------------------------------------------
+  if (!MemFeatMain.MemDmi (MemMainPtr)) {
+    return AGESA_CRITICAL;
+  }
+
+  return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mdef.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mdef.c
new file mode 100644
index 0000000000..aa825e5230
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mdef.c
@@ -0,0 +1,147 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mdef.c
+ *
+ * Memory Controller header file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Filecode.h"
+#include "AdvancedApi.h"
+#include "mm.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MDEF_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+MemMFlowDef (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is the default return function
+ */
+
+VOID
+memDefRet ( VOID )
+{
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function is the default return function that returns TRUE
+ *
+ */
+BOOLEAN
+memDefTrue ( VOID )
+{
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function is used in place of an un-supported function that returns FALSE.
+ *
+ */
+BOOLEAN
+memDefFalse ( VOID )
+{
+  return FALSE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is the default return function for flow control
+ */
+AGESA_STATUS
+MemMFlowDef (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  MemMainPtr->MemPtr->IsFlowControlSupported = FALSE;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function is used in place of an un-supported function that returns AGESA_SUCCESS.
+ *
+ */
+AGESA_STATUS
+memDefRetSuccess ( VOID )
+{
+  return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/merrhdl.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/merrhdl.c
new file mode 100644
index 0000000000..924a5ae5ec
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/merrhdl.c
@@ -0,0 +1,188 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * merrhdl.c
+ *
+ * Memory error handling
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "heapManager.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MERRHDL_FILECODE
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function handle errors occur in memory code.
+ *
+ *
+ *     @param[in,out]   *MCTPtr - pointer to DIE_STRUCT.
+ *     @param[in,out]   DCT - DCT that needs to be handled.
+ *     @param[in,out]   ChipSelMask - Chip select mask that needs to be handled
+ *     @param[in,out]   *StdHeader - pointer to AMD_CONFIG_PARAMS
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemErrHandle (
+  IN       DIE_STRUCT *MCTPtr,
+  IN       UINT8  DCT,
+  IN       UINT16  ChipSelMask,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  BOOLEAN ErrorRecovery;
+  BOOLEAN IgnoreErr;
+  DCT_STRUCT *DCTPtr;
+  UINT8 CurrentDCT;
+  LOCATE_HEAP_PTR LocHeap;
+  MEM_NB_BLOCK *NBPtr;
+  MEM_MAIN_DATA_BLOCK mmData;
+
+  DCTPtr = MCTPtr->DctData;
+  ErrorRecovery = TRUE;
+  IgnoreErr = FALSE;
+  IDS_OPTION_HOOK (IDS_MEM_ERROR_RECOVERY, &ErrorRecovery, StdHeader);
+
+  if (ErrorRecovery) {
+    if (DCT == EXCLUDE_ALL_DCT) {
+      // Exclude all DCTs on a node
+      for (CurrentDCT = 0; CurrentDCT < MCTPtr->DctCount; CurrentDCT++) {
+        DCTPtr[CurrentDCT].Timings.CsTestFail = DCTPtr[CurrentDCT].Timings.CsPresent;
+      }
+    } else if (ChipSelMask == EXCLUDE_ALL_CHIPSEL) {
+      // Exclude the specified DCT
+      DCTPtr[DCT].Timings.CsTestFail = DCTPtr[DCT].Timings.CsPresent;
+    } else {
+      // Exclude the chip select that has been marked out
+      DCTPtr[DCT].Timings.CsTestFail |= ChipSelMask & DCTPtr[DCT].Timings.CsPresent;
+      IDS_OPTION_HOOK (IDS_LOADCARD_ERROR_RECOVERY, &DCTPtr[DCT], StdHeader);
+    }
+
+    // Exclude the failed dimm to recovery from error
+    if (MCTPtr->NodeMemSize != 0) {
+      LocHeap.BufferHandle = AMD_MEM_AUTO_HANDLE;
+      if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+        // NB block has already been constructed by main block.
+        // No need to construct it here.
+        NBPtr = (MEM_NB_BLOCK *)LocHeap.BufferPtr;
+        if (!NBPtr->SharedPtr->NodeMap[MCTPtr->NodeId].IsValid) {
+          // Memory map has not been calculated, no need to remap memory across node here.
+          // Only need to remap memory within the node.
+          NBPtr = &NBPtr[MCTPtr->NodeId];
+          NBPtr->FeatPtr->ExcludeDIMM (NBPtr);
+        } else {
+          // Need to remap memory across the whole system.
+          mmData.MemPtr = NBPtr->MemPtr;
+          mmData.mmSharedPtr = NBPtr->SharedPtr;
+          mmData.NBPtr = NBPtr;
+          mmData.TechPtr = (MEM_TECH_BLOCK *) (&NBPtr[NBPtr->MemPtr->DieCount]);
+          mmData.DieCount = NBPtr->MemPtr->DieCount;
+          if (!MemFeatMain.ExcludeDIMM (&mmData)) {
+            return FALSE;
+          }
+        }
+      }
+      // If allocation fails, that means the code is not running at BSP.
+      // Parallel training is in process.
+      // Remap for parallel training will be done when control returns to BSP.
+    }
+    return TRUE;
+  } else {
+    IDS_OPTION_HOOK (IDS_MEM_IGNORE_ERROR, &IgnoreErr, StdHeader);
+    if (IgnoreErr) {
+      return TRUE;
+    }
+    SetMemError (AGESA_FATAL, MCTPtr);
+    // ErrorRecovery is FALSE
+    return FALSE;
+  }
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/minit.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/minit.c
new file mode 100644
index 0000000000..34fd929077
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/minit.c
@@ -0,0 +1,138 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * minit.c
+ *
+ * Initializer support function
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "AdvancedApi.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "Ids.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MINIT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern MEM_NB_SUPPORT memNBInstalled[];
+extern MEM_PLATFORM_CFG* memPlatformTypeInstalled[];
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *  This function initializes the default parameter, function pointers, build options
+ *   and SPD data for memory configuration
+ *
+ *     @param[in,out]   *MemPtr   - Pointer to the MEM_DATA_STRUCT
+ *     @param[in,out]   *PlatFormConfig -  Platform profile/build option config structure
+ *
+ */
+
+VOID
+AmdMemInitDataStructDef (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   PLATFORM_CONFIGURATION   *PlatFormConfig
+  )
+{
+  UINT8 p;
+  UINT8 i;
+  // We need a way of specifying default values for each particular northbridge
+  // family.  We also need to make sure that the IBV knows which parameter struct
+  // is for which northbridge.
+  //----------------------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemBeforeMemDataInit, &MemPtr->StdHeader);
+
+  MemPtr->PlatFormConfig = PlatFormConfig;
+
+  memNBInstalled[0].MemNInitDefaults (MemPtr);
+
+  //----------------------------------------------------------------------------
+  // INITIALIZE PLATFORM SPECIFIC CONFIGURATION STRUCT
+  //----------------------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemPlatformSpecificConfig, &MemPtr->StdHeader);
+  i = 0;
+  for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+    if (memPlatformTypeInstalled[i] != NULL) {
+      MemPtr->GetPlatformCfg[p] = memPlatformTypeInstalled[i];
+      i++;
+    } else {
+      MemPtr->GetPlatformCfg[p] = MemAGetPsCfgDef;
+    }
+  }
+  AGESA_TESTPOINT (TpProcMemAfterMemDataInit, &MemPtr->StdHeader);
+  MemPtr->ErrorHandling = MemErrHandle;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mm.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mm.c
new file mode 100644
index 0000000000..80df83a42f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mm.c
@@ -0,0 +1,253 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mm.c
+ *
+ * Main Memory Entrypoint file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MM_FILECODE
+/* features */
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function deallocates heap buffers that were allocated in AmdMemAuto
+ *
+ *     @param[in,out]   *MemPtr   - Pointer to the MEM_DATA_STRUCT
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+MemAmdFinalize (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT8 Die;
+
+  for (Die = 0; Die < MemPtr->DieCount; Die++ ) {
+    HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_TRN_DATA_HANDLE, Die, 0, 0), &MemPtr->StdHeader);
+    HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, Die, 0, 0), &MemPtr->StdHeader);
+  }
+
+  HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_DIE_STRUCT_HANDLE, 0, 0, 0), &MemPtr->StdHeader);
+  HeapDeallocateBuffer (AMD_S3_SAVE_HANDLE, &MemPtr->StdHeader);
+  HeapDeallocateBuffer (AMD_MEM_SPD_HANDLE, &MemPtr->StdHeader);
+  HeapDeallocateBuffer (AMD_MEM_AUTO_HANDLE, &MemPtr->StdHeader);
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * MemSocketScan - Scan all nodes, recording the physical Socket number,
+ * Die Number (relative to the socket), and PCI Device address of each
+ * populated socket.
+ *
+ * This information is used by the northbridge block to map a dram
+ * channel on a particular DCT, on a particular CPU Die, in a particular
+ * socket to a the DRAM SPD Data for the DIMMS physically connected to
+ * that channel.
+ *
+ * Also, the customer socket map is populated with pointers to the
+ * appropriate channel structures, so that the customer can locate the
+ * appropriate channel configuration data.
+ *
+ * This socket scan will always result in Die 0 as the BSP.
+ *
+ *     @param[in,out]   *mmPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+AGESA_STATUS
+MemSocketScan (
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  UINT8 DieIndex;
+  UINT8 DieCount;
+  UINT32 SocketId;
+  UINT32 DieId;
+  UINT8 Die;
+  PCI_ADDR Address;
+  AGESA_STATUS AgesaStatus;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  ASSERT (mmPtr != NULL);
+  ASSERT (mmPtr->MemPtr != NULL);
+  MemPtr = mmPtr->MemPtr;
+
+  //
+  //  Count the number of dies in the system
+  //
+  DieCount = 0;
+  for (Die = 0; Die < MAX_NODES_SUPPORTED; Die++) {
+    if (GetSocketModuleOfNode ((UINT32)Die, &SocketId, &DieId, (VOID *)MemPtr)) {
+      DieCount++;
+    }
+  }
+  MemPtr->DieCount = DieCount;
+  mmPtr->DieCount = DieCount;
+
+  if (DieCount > 0) {
+    //
+    //  Allocate buffer for DIE_STRUCTs
+    //
+    AllocHeapParams.RequestedBufferSize = ((UINT16)DieCount * sizeof (DIE_STRUCT));
+    AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DIE_STRUCT_HANDLE, 0, 0, 0);
+    AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+    if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) == AGESA_SUCCESS) {
+      MemPtr->DiesPerSystem = (DIE_STRUCT *)AllocHeapParams.BufferPtr;
+      //
+      //  Find SocketId, DieId, and PCI address of each node
+      //
+      DieIndex = 0;
+      for (Die = 0; Die < MAX_NODES_SUPPORTED; Die++) {
+        if (GetSocketModuleOfNode ((UINT32)Die, &SocketId, &DieId, (VOID *)MemPtr)) {
+          if (GetPciAddress ((VOID *)MemPtr, (UINT8)SocketId, (UINT8)DieId, &Address, &AgesaStatus)) {
+            MemPtr->DiesPerSystem[DieIndex].SocketId = (UINT8)SocketId;
+            MemPtr->DiesPerSystem[DieIndex].DieId = (UINT8)DieId;
+            MemPtr->DiesPerSystem[DieIndex].PciAddr.AddressValue = Address.AddressValue;
+
+            DieIndex++;
+          }
+        }
+      }
+      AgesaStatus = AGESA_SUCCESS;
+    } else {
+      ASSERT(FALSE); // Heap allocation failed for DIE_STRUCTs
+      AgesaStatus = AGESA_FATAL;
+    }
+  } else {
+    ASSERT(FALSE); // No die in the system
+    AgesaStatus = AGESA_FATAL;
+  }
+  return AgesaStatus;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function sets memory errors into MemDataStruct
+ *
+ *
+ *     @param[in,out]   *MCTPtr  - Pointer to the DIE_STRUCT
+ *     @param[in]       Errorval - Error value to update
+ */
+
+VOID
+SetMemError (
+  IN       AGESA_STATUS  Errorval,
+  IN OUT   DIE_STRUCT *MCTPtr
+  )
+{
+  if (MCTPtr->ErrCode < Errorval) {
+    MCTPtr->ErrCode = Errorval;
+  }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function is default function for the fultion list
+ *
+ *     @param[in,out]   *pMemData   - Pointer to the MEM_DATA_STRUCT
+ */
+VOID
+AmdMemFunctionListDef (
+  IN OUT   VOID *pMemData
+  )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmConditionalPso.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmConditionalPso.c
new file mode 100644
index 0000000000..2adc24a918
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmConditionalPso.c
@@ -0,0 +1,696 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmConditionalPso.c
+ *
+ * Functions to support conditional entries in the Platform Specific Override Table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMCONDITIONALPSO_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define PSO_TYPE    0
+#define PSO_LENGTH  1
+#define PSO_DATA    2
+
+typedef enum _PSO_STATE {
+  PSO_FIND_CONDITION = 100,  // Searching for initial Condition statement
+  PSO_FIND_ACTION,           // Searching for initial Action Statement
+  PSO_MATCH_ACTION,          // Trying to find an action that matches the caller's request
+  PSO_CHECK_CONDITION,       // Checking the condition that preceded the found action
+  PSO_DO_ACTION,             // Performing Action
+  PSO_COMPLETE               // Completed processing of this request
+} PSO_STATE;
+
+typedef struct _D3_CMP_CAL {
+  UINT32 D3Cmp0NCal   :3;
+  UINT32 Reserved34   :2;
+  UINT32 D3Cmp0PCal   :3;
+  UINT32 Reserved89   :2;
+  UINT32 D3Cmp1NCal   :3;
+  UINT32 Reserved1314 :2;
+  UINT32 D3Cmp1PCal   :3;
+  UINT32 Reserved1819 :2;
+  UINT32 D3Cmp2NCal   :3;
+  UINT32 Reserved2324 :2;
+  UINT32 D3Cmp2PCal   :3;
+  UINT32 Reserved2831 :2;
+} D3_CMP_CAL;
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+ STATIC
+ MemPSODoActionODT (
+   IN OUT   MEM_NB_BLOCK *NBPtr,
+   IN       UINT8 *Buffer
+   );
+
+ BOOLEAN
+ STATIC
+ MemPSODoActionAddrTmg (
+   IN OUT   MEM_NB_BLOCK *NBPtr,
+   IN       UINT8 *Buffer
+   );
+
+ BOOLEAN
+ STATIC
+ MemPSODoActionODCControl (
+   IN OUT   MEM_NB_BLOCK *NBPtr,
+   IN       UINT8 *Buffer
+   );
+
+ BOOLEAN
+ STATIC
+ MemPSODoActionSlewRate (
+   IN OUT   MEM_NB_BLOCK *NBPtr,
+   IN       UINT8 *Buffer
+   );
+
+BOOLEAN
+STATIC
+MemPSODoActionGetFreqLimit (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  );
+
+BOOLEAN
+STATIC
+MemCheckRankType (
+  IN       CH_DEF_STRUCT *CurrentChannel,
+  IN       UINT16 RankType
+  );
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      Process Conditional Platform Specific Overrides
+ *
+ *      @param[in] PlatformMemoryConfiguration - Pointer to Platform config table
+ *      @param[in] NBPtr - Pointer to Current NBBlock
+ *      @param[in] PsoAction - Action type
+ *      @param[in] Dimm - Dimm Number
+ *
+ *      @return          BOOLEAN -            TRUE : Action was performed
+ *                                            FALSE: Action was not performed
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemProcessConditionalOverrides (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 PsoAction,
+  IN       UINT8 Dimm
+  )
+{
+  BOOLEAN Result;
+  MEM_TECH_BLOCK *TechPtr;
+  UINT8 *Buffer;
+  UINT8 *ConditionStartPtr;
+  UINT8 *ActionStartPtr;
+  UINT8 *SpdBufferPtr;
+  UINT8 i;
+  UINT8 DimmMask;
+  UINT8 CurDimmMask;
+  BOOLEAN Condition;
+  BOOLEAN TmpCond;
+  PSO_STATE State;
+  ASSERT (PlatformMemoryConfiguration != NULL);
+  ASSERT (NBPtr != NULL);
+  ASSERT ((PsoAction >= PSO_ACTION_MIN) && (PsoAction <= PSO_ACTION_MAX));
+  //
+  // Set up local data
+  //
+  TechPtr = NBPtr->TechPtr;
+  Buffer = PlatformMemoryConfiguration;
+  State = PSO_FIND_CONDITION;
+  ConditionStartPtr = NULL;
+  ActionStartPtr = NULL;
+  Condition = FALSE;
+  DimmMask = 0xFF;
+  CurDimmMask = 0xFF;
+  Result = FALSE;
+
+  if (Dimm != 0xFF) {
+    DimmMask = ( 1 << Dimm);
+  }
+  DimmMask &= (UINT8) (NBPtr->ChannelPtr->ChDimmValid & 0xFF);
+  if (DimmMask == 0) {
+    return Result;
+  }
+
+  //
+  // Search for Condition Entry
+  //
+  while (State != PSO_COMPLETE) {
+    switch (State) {
+    //
+    // Searching for initial Condition statement
+    //
+    case PSO_FIND_CONDITION:
+      ASSERT (Buffer != NULL);
+      while (Buffer[PSO_TYPE] != PSO_CONDITION_AND) {
+        //
+        // If end of table is reached, Change state to complete and break.
+        //
+        if (Buffer[PSO_TYPE] == PSO_END) {
+          State = PSO_COMPLETE;
+          break;
+        }
+        //
+        // Otherwise, increment Buffer Pointer to the next PSO entry.
+        //
+        Buffer += (Buffer[PSO_LENGTH] + 2);
+      }
+      //
+      // If Condition statement has been found, save the Condition Start Pointer,
+      //  and change to next state
+      //
+      if (State != PSO_COMPLETE) {
+        ASSERT (Buffer != NULL);
+        State = PSO_FIND_ACTION;
+        ConditionStartPtr = Buffer;
+        Buffer += (Buffer[PSO_LENGTH] + 2);
+      }
+      break;
+    //
+    // Searching for an action that matches the caller's request
+    //
+    case PSO_FIND_ACTION:
+      ASSERT (Buffer != NULL);
+      while (Buffer[PSO_TYPE] != PsoAction) {
+        //
+        // If non-conditional entry, change state to complete and break.
+        //
+        if ((Buffer[PSO_TYPE] < CONDITIONAL_PSO_MIN) || (Buffer[PSO_TYPE] > CONDITIONAL_PSO_MAX)) {
+          State = PSO_COMPLETE;
+          break;
+        }
+        //
+        // Check for the Start of a new condition block
+        //
+        if (Buffer[PSO_TYPE] == PSO_CONDITION_AND) {
+          ConditionStartPtr = Buffer;
+        }
+        //
+        // Otherwise, increment buffer pointer to the next PSO entry.
+        //
+        Buffer += (Buffer[PSO_LENGTH] + 2);
+      }
+      //
+      // If Action statement has been found, Save the Action Start Pointer, Reset Buffer to Condition Start
+      //  and Change to next state.
+      //
+      if (State != PSO_COMPLETE) {
+        State = PSO_CHECK_CONDITION;
+        ASSERT (Buffer != NULL);
+        ActionStartPtr = Buffer;
+        Buffer = ConditionStartPtr;
+        Condition = TRUE;
+      }
+      break;
+    //
+    // Checking the condition that preceded the found action
+    //
+    case PSO_CHECK_CONDITION:
+      ASSERT (Buffer != NULL);
+      //
+      // Point to the next Condition
+      //
+      Buffer += (Buffer[PSO_LENGTH] + 2);
+      ASSERT ((Buffer[PSO_TYPE] >= CONDITIONAL_PSO_MIN) && (Buffer[PSO_TYPE] <= CONDITIONAL_PSO_MAX));
+      //
+      // This section has already been checked for invalid statements so just exit on ACTION_xx
+      //
+      if ((Buffer[PSO_TYPE] >= PSO_ACTION_MIN) && (Buffer[PSO_TYPE] <= PSO_ACTION_MAX)) {
+        if (Condition) {
+          ASSERT (Buffer != NULL);
+          State = PSO_DO_ACTION;              // Perform the Action
+        } else {
+          State = PSO_FIND_CONDITION;         // Go back and look for another condition/action
+        }
+        Buffer = ActionStartPtr;              // Restore Action Pointer
+        break;
+      }
+      switch (Buffer[PSO_TYPE]) {
+
+      case PSO_CONDITION_AND:
+        //
+        // Additional CONDITION_AND is ORed with Previous ones, so if Previous result is TRUE
+        //  just restore action pointer and perform the action.
+        //
+        if (Condition) {
+          State = PSO_DO_ACTION;
+          Buffer = ActionStartPtr;
+        } else {
+          //
+          // If its false, Start over and evaluate next cond.
+          // reset the Current Dimm Mask
+          //
+          Condition = TRUE;
+          CurDimmMask = 0xFF;
+        }
+        break;
+
+      case PSO_CONDITION_LOC:
+        //
+        // Condition location
+        //
+        CurDimmMask = Buffer[4];
+        Condition &= ( ((Buffer[2] & (1 << (NBPtr->MCTPtr->SocketId))) != 0) &&
+                       ((Buffer[3] & (1 << (NBPtr->ChannelPtr->ChannelID))) != 0) &&
+                       ((CurDimmMask & DimmMask) != 0) );
+        break;
+
+      case PSO_CONDITION_SPD:
+        //
+        // Condition SPD
+        //
+        TmpCond = FALSE;
+        for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i ++) {
+          if ( ((DimmMask & CurDimmMask) & ((UINT16) (1 << i))) != 0) {
+            if (TechPtr->GetDimmSpdBuffer (TechPtr, &SpdBufferPtr, i)) {
+              TmpCond |= ( (SpdBufferPtr[Buffer[2]] & Buffer[3]) == Buffer[4]);
+            }
+          }
+        }
+        Condition &= TmpCond;
+        break;
+
+      case PSO_CONDITION_REG:
+        //
+        // Condition Register - unsupported at this time
+        //
+        break;
+
+      default:
+        ASSERT (FALSE);
+    } // End Condition Switch
+    break;
+
+    case PSO_DO_ACTION:
+      ASSERT (Buffer != NULL);
+      //
+      // Performing Action
+      //
+      if ((Buffer[PSO_TYPE] < PSO_ACTION_MIN) || (Buffer[PSO_TYPE] > PSO_ACTION_MAX)) {
+        State = PSO_COMPLETE;
+      }
+      if (Buffer[PSO_TYPE] == PsoAction) {
+        switch (Buffer[PSO_TYPE]) {
+        case PSO_ACTION_ODT:
+          Result = MemPSODoActionODT (NBPtr, &Buffer[PSO_DATA]);
+          break;
+        case PSO_ACTION_ADDRTMG:
+          Result = MemPSODoActionAddrTmg (NBPtr, &Buffer[PSO_DATA]);
+          break;
+        case PSO_ACTION_ODCCONTROL:
+          Result = MemPSODoActionODCControl (NBPtr, &Buffer[PSO_DATA]);
+          break;
+        case PSO_ACTION_SLEWRATE:
+          Result = MemPSODoActionSlewRate (NBPtr, &Buffer[PSO_DATA]);
+          break;
+        case PSO_ACTION_SPEEDLIMIT:
+          Result = MemPSODoActionGetFreqLimit (NBPtr, &Buffer[PSO_DATA]);
+          break;
+        case PSO_ACTION_REG:
+          break;
+        default:
+          ASSERT (FALSE);
+        } // End Action Switch
+        //
+        // If Action was performed, mark complete.
+        //
+        if (Result) {
+          State = PSO_COMPLETE;
+        }
+    }// End Action
+
+      //
+      // Point to the next PSO Entry
+      //
+      Buffer += (Buffer[PSO_LENGTH] + 2);
+      break;
+
+    case PSO_COMPLETE:
+      //
+      // Completed processing of this request
+      //
+      break;
+
+    default:
+      ASSERT (FALSE);
+    } // End State Switch
+
+  } // End While
+
+  return Result;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *      Perform ODT Platform Override
+ *
+ *      @param[in] NBPtr - Pointer to Current NBBlock
+ *      @param[in] Buffer - Pointer to the Action Command Data (w/o Type and Len)
+ *
+ *      @return         BOOLEAN -             TRUE : Action was performed
+ *                                            FALSE: Action was not performed
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPSODoActionODT (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  BOOLEAN Result;
+  UINT32 Speed;
+  UINT8 Dimms;
+  UINT8 i;
+  UINT8 QR_Dimms;
+  Result = FALSE;
+  Speed = ((UINT32) 1 << (NBPtr->DCTPtr->Timings.Speed / 66));
+  Dimms = NBPtr->ChannelPtr->Dimms;
+  QR_Dimms = 0;
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+    if (((NBPtr->ChannelPtr->DimmQrPresent & (UINT16) (1 << i)) != 0) && (i < 2)) {
+      QR_Dimms ++;
+    }
+  }
+  if ((Speed & ((UINT32 *) Buffer)[0]) != 0) {
+    if ((((UINT8) (1 << (Dimms - 1)) & Buffer[4]) != 0) || (Buffer[4] == ANY_NUM)) {
+      if (((QR_Dimms == 0) && (Buffer[5] == NO_DIMM)) ||
+          ((QR_Dimms > 0) && (((UINT8) (1 << (QR_Dimms - 1)) & Buffer[5]) != 0)) ||
+           (Buffer[5] == ANY_NUM)) {
+        NBPtr->PsPtr->DramTerm = Buffer[6];
+        NBPtr->PsPtr->QR_DramTerm = Buffer[7];
+        NBPtr->PsPtr->DynamicDramTerm = Buffer[8];
+        Result = TRUE;
+        IDS_HDT_CONSOLE (MEM_FLOW, "      Platform Override: DramTerm:%02x, QRDramTerm:%02x, DynDramTerm:%02x\n", Buffer[6], Buffer[7], Buffer[8]);
+      }
+    }
+  }
+  return Result;
+ }
+
+ /* -----------------------------------------------------------------------------*/
+/**
+ *      Perform Address Timing Platform Override
+ *
+ *      @param[in] NBPtr - Pointer to Current NBBlock
+ *      @param[in] Buffer - Pointer to the Action Command Data (w/o Type and Len)
+ *
+ *      @return          BOOLEAN -             TRUE : Action was performed
+ *                                             FALSE: Action was not performed
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPSODoActionAddrTmg (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  BOOLEAN Result;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT32 Speed;
+  UINT16 DimmConfig;
+
+  Result = FALSE;
+  ChannelPtr = NBPtr->ChannelPtr;
+  Speed = ((UINT32) 1 << (NBPtr->DCTPtr->Timings.Speed / 66));
+  DimmConfig = *(UINT16 *) &(Buffer[4]);
+
+  if ((Speed & ((UINT32 *) Buffer)[0]) != 0) {
+    if (MemCheckRankType (ChannelPtr, DimmConfig)) {
+      ChannelPtr->DctAddrTmg = *(UINT32*) &(Buffer[6]);
+      Result = TRUE;
+      IDS_HDT_CONSOLE (MEM_FLOW, "      Platform Override: Address Timing:%08x\n", *(UINT32*) &(Buffer[6]));
+    }
+  }
+  return Result;
+ }
+
+  /* -----------------------------------------------------------------------------*/
+/**
+ *      Perform Drive Strength Platform Override
+ *
+ *      @param[in] NBPtr - Pointer to Current NBBlock
+ *      @param[in] Buffer - Pointer to the Action Command Data (w/o Type and Len)
+ *
+ *      @return          BOOLEAN -             TRUE : Action was performed
+ *                                             FALSE: Action was not performed
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPSODoActionODCControl (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  BOOLEAN Result;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT32 Speed;
+  UINT16 DimmConfig;
+
+  Result = FALSE;
+  ChannelPtr = NBPtr->ChannelPtr;
+  Speed = ((UINT32) 1 << (NBPtr->DCTPtr->Timings.Speed / 66));
+  DimmConfig = *(UINT16 *) &(Buffer[4]);
+
+  if ((Speed & ((UINT32 *) Buffer)[0]) != 0) {
+    if (MemCheckRankType (ChannelPtr, DimmConfig)) {
+      ChannelPtr->DctOdcCtl = *(UINT32*) &(Buffer[6]);
+      Result = TRUE;
+      IDS_HDT_CONSOLE (MEM_FLOW, "      Platform Override: ODC Control:%08x\n", *(UINT32*)&(Buffer[6]));
+    }
+  }
+  return Result;
+ }
+
+  /* -----------------------------------------------------------------------------*/
+/**
+ *      Perform Slew Rate Platform Override
+ *
+ *      @param[in] NBPtr - Pointer to Current NBBlock
+ *      @param[in] Buffer - Pointer to the Action Command Data (w/o Type and Len)
+ *
+ *     @return          BOOLEAN -             TRUE : Action was performed
+ *                                            FALSE: Action was not performed
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPSODoActionSlewRate (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  BOOLEAN Result;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT32 Speed;
+  UINT16 DimmConfig;
+
+  Result = FALSE;
+  ChannelPtr = NBPtr->ChannelPtr;
+  Speed = ((UINT32) 1 << (NBPtr->DCTPtr->Timings.Speed / 66));
+  DimmConfig = *(UINT16 *) &(Buffer[4]);
+
+  if ((Speed & ((UINT32 *) Buffer)[0]) != 0) {
+    if (MemCheckRankType (ChannelPtr, DimmConfig)) {
+      MemNSetBitFieldNb (NBPtr, BFD3Cmp0NCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp0NCal );
+      MemNSetBitFieldNb (NBPtr, BFD3Cmp0PCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp0PCal );
+      MemNSetBitFieldNb (NBPtr, BFD3Cmp1NCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp1NCal );
+      MemNSetBitFieldNb (NBPtr, BFD3Cmp1PCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp1PCal );
+      MemNSetBitFieldNb (NBPtr, BFD3Cmp2NCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp2NCal );
+      MemNSetBitFieldNb (NBPtr, BFD3Cmp2PCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp2PCal );
+      Result = TRUE;
+      IDS_HDT_CONSOLE (MEM_FLOW, "      Platform Override: Slew Rate:%08x\n", *(UINT32 *) &(Buffer[6]));
+    }
+  }
+  return Result;
+ }
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function overrides the  POR supported speed for a specific config
+ *
+ *      @param[in] NBPtr - Pointer to Current NBBlock
+ *      @param[in] Buffer - Pointer to the Action Command Data (w/o Type and Len)
+ *
+ *      @return          BOOLEAN -            TRUE : Action was performed
+ *                                            FALSE: Action was not performed
+ *
+ */
+BOOLEAN
+STATIC
+MemPSODoActionGetFreqLimit (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  BOOLEAN Result;
+  CH_DEF_STRUCT *ChannelPtr;
+  DCT_STRUCT *DCTPtr;
+  UINT16 DimmConfig;
+  UINT16 SpeedLimit;
+
+  Result = FALSE;
+  ChannelPtr = NBPtr->ChannelPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  DimmConfig = *(UINT16*) &(Buffer[0]);
+  SpeedLimit = 0;
+  //
+  // Match number of dimms, then Rank Type
+  //
+  if (ChannelPtr->Dimms == Buffer[2]) {
+    if (MemCheckRankType (ChannelPtr, DimmConfig)) {
+      //
+      // Select speed based on current voltage
+      //
+      if (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) {
+        SpeedLimit = *(UINT16*) &(Buffer[3]);
+      } else if (NBPtr->RefPtr->DDR3Voltage == VOLT1_25) {
+        SpeedLimit = *(UINT16*) &(Buffer[7]);
+      } else {
+        SpeedLimit = *(UINT16*) &(Buffer[5]);
+      }
+      //
+      // Set the Speed limit
+      //
+      if (DCTPtr->Timings.TargetSpeed > SpeedLimit) {
+        DCTPtr->Timings.TargetSpeed = SpeedLimit;
+      }
+      Result = TRUE;
+      IDS_HDT_CONSOLE (MEM_FLOW, "      Platform Override: Max Memory Speed for Channel %d: %d\n", NBPtr->Channel, SpeedLimit);
+    }
+  }
+  return Result;
+}
+
+ /* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function matches a particular Rank Type Mask to the installed
+ *    DIMM configuration on the provided channel.
+ *
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *     @param[in]       RankType              Mask of rank type to match
+ *
+ *     @return          BOOLEAN -             TRUE : Rank types match
+ *                                            FALSE: Rank types do not match
+ *
+ */
+BOOLEAN
+STATIC
+MemCheckRankType (
+  IN       CH_DEF_STRUCT *CurrentChannel,
+  IN       UINT16 RankType
+  )
+{
+  BOOLEAN Result;
+  UINT8 i;
+  UINT16 DIMMRankType;
+
+  DIMMRankType = MemAGetPsRankType (CurrentChannel);
+  Result = TRUE;
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+    if ( ((DIMMRankType & (0x0F << (i << 2))) + (RankType & (0x0F << (i << 2)))) != 0) {
+      Result &= (((DIMMRankType & (0x0F << (i << 2))) & ( RankType & ( 0x0F << ( i << 2)))) != 0);
+    }
+    if (!Result) {
+      break;
+    }
+  }
+  return Result;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmEcc.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmEcc.c
new file mode 100644
index 0000000000..dbce871c1a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmEcc.c
@@ -0,0 +1,136 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmEcc.c
+ *
+ * Main Memory Feature implementation file for ECC Initialization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "ma.h"
+#include "mfmemclr.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMECC_FILECODE
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemMEcc (
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmPtr
+  );
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *
+ *
+ *     @param[in,out]   *mmPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMEcc (
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmPtr
+  )
+{
+  UINT8 Die;
+  MEM_SHARED_DATA *SharedPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  BOOLEAN RetVal;
+
+  RetVal = TRUE;
+  RefPtr = mmPtr->MemPtr->ParameterListPtr;
+  SharedPtr = mmPtr->mmSharedPtr;
+
+  //
+  // Run Northbridge-specific ECC initialization feature for each die.
+  //
+  SharedPtr->AllECC = FALSE;
+  if (RefPtr->EnableEccFeature) {
+    SharedPtr->AllECC = TRUE;
+    AGESA_TESTPOINT (TpProcMemEccInitialization, &(mmPtr->MemPtr->StdHeader));
+
+    for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+      mmPtr->NBPtr[Die].FeatPtr->CheckEcc (&(mmPtr->NBPtr[Die]));
+      RetVal &= (BOOLEAN) (mmPtr->NBPtr[Die].MCTPtr->ErrCode < AGESA_FATAL);
+    }
+    if (SharedPtr->AllECC == TRUE) {
+      RefPtr->GStatus[GsbAllECCDimms] = TRUE;
+      // Sync mem clear before setting scrub rate.
+      for (Die = 0; Die < mmPtr->DieCount; Die++) {
+        MemFMctMemClr_Sync (&(mmPtr->NBPtr[Die]));
+      }
+    }
+  }
+  // Scrubber control
+  for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+    mmPtr->NBPtr[Die].FeatPtr->InitEcc (&(mmPtr->NBPtr[Die]));
+  }
+  return RetVal;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmExcludeDimm.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmExcludeDimm.c
new file mode 100644
index 0000000000..914d833d53
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmExcludeDimm.c
@@ -0,0 +1,245 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmExcludeDimm.c
+ *
+ * Main Memory Feature implementation file for RAS DIMM Exclude Feature
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 58065 $ @e \$Date: 2011-08-19 01:55:26 -0600 (Fri, 19 Aug 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mport.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMEXCLUDEDIMM_FILECODE
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMRASExcludeDIMM (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Check and disable Chip selects that fail training on all nodes.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMRASExcludeDIMM (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  BOOLEAN IsEnabled;
+  BOOLEAN RetVal;
+  BOOLEAN IsChannelIntlvEnabled[MAX_NODES_SUPPORTED];
+  UINT8   FirstEnabledNode;
+  UINT32  BottomIO;
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  S_UINT64 SMsr;
+
+  FirstEnabledNode = 0;
+  IsEnabled = FALSE;
+  RetVal = TRUE;
+  NBPtr = MemMainPtr->NBPtr;
+  RefPtr = NBPtr[BSP_DIE].RefPtr;
+  for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+    if (NBPtr[Node].FeatPtr->ExcludeDIMM (&NBPtr[Node])) {
+      if (!IsEnabled) {
+        // Record the first node that has exclude dimm enabled
+        FirstEnabledNode = Node;
+        IsEnabled = TRUE;
+      }
+    }
+  }
+
+  // Force memory address remap when we want to undo 1TB hoisting
+  if (NBPtr->SharedPtr->UndoHoistingAbove1TB) {
+    IsEnabled = TRUE;
+  }
+
+  if (IsEnabled) {
+    // Check if all nodes have all dimms excluded. If yes, fatal exit
+    NBPtr[BSP_DIE].SharedPtr->CurrentNodeSysBase = 0;
+    BottomIO = (NBPtr[BSP_DIE].RefPtr->BottomIo & 0xF8) << 8;
+    // If the first node that has excluded dimms does not have a system base smaller
+    // than bottomIO, then we don't need to reset the GStatus, as we don't need to
+    // remap memory hole.
+    if (NBPtr[FirstEnabledNode].MCTPtr->NodeSysBase < BottomIO) {
+      RefPtr->GStatus[GsbHWHole] = FALSE;
+      RefPtr->GStatus[GsbSpIntRemapHole] = FALSE;
+      RefPtr->GStatus[GsbSoftHole] = FALSE;
+      RefPtr->HoleBase = 0;
+      RefPtr->SysLimit = 0;
+    }
+    // If Node Interleaving has been executed before the remapping then we need to
+    // start from the first node.
+    // There may be a few senarios:
+    // 1. Node interleaving is not enabled before the remap, and still cannot be enabled after
+    //    remap
+    // 2. Node interleaving cannot be enabled before the remap, but it can be enabled after
+    //    remap
+    // 3. Node interleaving is enabled before the remap, but it cannot be enabled after the remap
+    if (NBPtr->SharedPtr->NodeIntlv.IsValid) {
+      FirstEnabledNode = 0;
+    }
+
+    for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+      IsChannelIntlvEnabled [Node] = FALSE;
+      // Check if node interleaving has been enabled on this node
+      // if yes, disable it.
+      if (NBPtr[Node].GetBitField (&NBPtr[Node], BFDramIntlvEn) != 0) {
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDramIntlvEn, 0);
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDramIntlvSel, 0);
+      }
+      if (Node >= FirstEnabledNode) {
+        // Remap memory on nodes with node number larger than the first node that has excluded dimms.
+        // If channel interleaving has already been enabled, need to disable it before remapping memory.
+        if (NBPtr[Node].GetBitField (&NBPtr[Node], BFDctSelIntLvEn) != 0) {
+          NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelIntLvEn, 0);
+          IsChannelIntlvEnabled [Node] = TRUE;
+        }
+        NBPtr[Node].MCTPtr->Status[SbHWHole] = FALSE;
+        NBPtr[Node].MCTPtr->Status[SbSWNodeHole] = FALSE;
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelBaseAddr, 0);
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelHiRngEn, 0);
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelHi, 0);
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelBaseOffset, 0);
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDramHoleAddrReg, 0);
+        NBPtr[Node].HtMemMapInit (&NBPtr[Node]);
+      } else if (NBPtr[Node].MCTPtr->NodeMemSize != 0) {
+        // No change is needed in the memory map of this node.
+        // Need to adjust the current system base for other nodes processed later.
+        NBPtr[Node].SharedPtr->CurrentNodeSysBase = (NBPtr[Node].MCTPtr->NodeSysLimit + 1) & 0xFFFFFFF0;
+        RefPtr->SysLimit = NBPtr[Node].MCTPtr->NodeSysLimit;
+        // If the current node does not have the memory hole, then set DramHoleAddrReg to be 0.
+        // If memory hoisting is enabled later by other node, SyncAddrMapToAllNodes will set the base
+        // and DramMemHoistValid.
+        // Otherwise, do not change the register value, as we need to keep DramHoleOffset unchanged, as well
+        // DramHoleValid.
+        if (!NBPtr[Node].MCTPtr->Status[SbHWHole]) {
+          NBPtr[Node].SetBitField (&NBPtr[Node], BFDramHoleAddrReg, 0);
+        }
+      }
+    }
+
+    for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+      NBPtr[Node].SyncAddrMapToAllNodes (&NBPtr[Node]);
+    }
+
+    LibAmdMsrRead (TOP_MEM, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+    // Only when TOM is set can CpuMemTyping be re-run
+    if ((SMsr.hi != 0) || (SMsr.lo != 0)) {
+      if (RefPtr->SysLimit != 0) {
+        NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE]);
+
+        // When 1TB hoisting is not supported, TOP_MEM2 cannot exceed HT reserved region base.
+        if ((RefPtr->SysLimit >= HT_REGION_BASE_RJ16) && (NBPtr->SharedPtr->UndoHoistingAbove1TB)) {
+          SMsr.hi = HT_REGION_BASE_RJ16 >> (32 - 16);
+          SMsr.lo = HT_REGION_BASE_RJ16 << 16;
+          LibAmdMsrWrite (TOP_MEM2, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+          IDS_HDT_CONSOLE (MEM_FLOW, "TOP_MEM2: %08x0000\n", HT_REGION_BASE_RJ16);
+          RefPtr->Sub1THoleBase = HT_REGION_BASE_RJ16;
+          RefPtr->SysLimit = HT_REGION_BASE_RJ16 - 1;
+        }
+      }
+    }
+
+    // Re-run node interleaving if it has been exeucuted before the remap
+    if (NBPtr->SharedPtr->NodeIntlv.IsValid) {
+      MemFeatMain.InterleaveNodes (MemMainPtr);
+    }
+
+    // Re-enable channel interleaving if it was enabled before remapping memory
+    for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+      if (IsChannelIntlvEnabled [Node]) {
+        NBPtr[Node].FeatPtr->InterleaveChannels (&NBPtr[Node]);
+      }
+    }
+
+    // Reset UndoHoistingAbove1TB if it was previously set
+    NBPtr->SharedPtr->UndoHoistingAbove1TB = FALSE;
+  }
+
+  // if all dimms on all nodes are excluded, do fatal exit
+  if (RefPtr->SysLimit == 0) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_FATAL, NBPtr[BSP_DIE].MCTPtr);
+    ASSERT (FALSE);
+  }
+
+  for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+    RetVal &= (BOOLEAN) (NBPtr[Node].MCTPtr->ErrCode < AGESA_FATAL);
+  }
+
+  return RetVal;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmLvDdr3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmLvDdr3.c
new file mode 100644
index 0000000000..2874f3f76f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmLvDdr3.c
@@ -0,0 +1,292 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmLvDdr3.c
+ *
+ * Main Memory Feature implementation file for low voltage DDR3 support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mmLvDdr3.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMLVDDR3_FILECODE
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Find the common supported voltage on all nodes.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMLvDdr3 (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  BOOLEAN RetVal;
+  BOOLEAN SecondLoop;
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_PARAMETER_STRUCT *ParameterPtr;
+  MEM_SHARED_DATA *mmSharedPtr;
+
+  NBPtr = MemMainPtr->NBPtr;
+  mmSharedPtr = MemMainPtr->mmSharedPtr;
+  ParameterPtr = MemMainPtr->MemPtr->ParameterListPtr;
+  mmSharedPtr->VoltageMap = 0xFF;
+  SecondLoop = FALSE;
+  RetVal = TRUE;
+
+  for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+    NBPtr[Node].FeatPtr->LvDdr3 (&NBPtr[Node]);
+    // Check if there is no common supported voltage
+    if ((mmSharedPtr->VoltageMap == 0) && !SecondLoop) {
+      // restart node loop by setting node to 0xFF
+      Node = 0xFF;
+      SecondLoop = TRUE;
+    }
+  }
+
+  if (mmSharedPtr->VoltageMap == 0) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo commonly supported VDDIO is found.\n");
+    PutEventLog (AGESA_WARNING, MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO, 0, 0, 0, 0, &(NBPtr[BSP_DIE].MemPtr->StdHeader));
+    SetMemError (AGESA_WARNING, NBPtr[BSP_DIE].MCTPtr);
+    // When there is no commonly supported VDDIO, use 1.35V as the temporal VDDIO
+    ParameterPtr->DDR3Voltage = VOLT1_35;
+  } else {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nCommonly supported VDDIO is: %s%s%s.\n", ((mmSharedPtr->VoltageMap & 1) != 0) ? "1.5V, " : "", ((mmSharedPtr->VoltageMap & 2) != 0) ? "1.35V, " : "", ((mmSharedPtr->VoltageMap & 4) != 0) ? "1.25V" : "");
+    ParameterPtr->DDR3Voltage = CONVERT_ENCODED_TO_VDDIO (LibAmdBitScanReverse (mmSharedPtr->VoltageMap));
+  }
+
+  for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+    // Check if the voltage needs force to 1.5V
+    NBPtr[Node].FamilySpecificHook[ForceLvDimmVoltage] (&NBPtr[Node], MemMainPtr);
+
+    RetVal &= (BOOLEAN) (NBPtr[Node].MCTPtr->ErrCode < AGESA_FATAL);
+  }
+
+  return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Find the common supported voltage on all nodes, taken into account of the
+ *  user option for performance and power saving.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMLvDdr3PerformanceEnhPre (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8 Node;
+  BOOLEAN RetVal;
+  DIMM_VOLTAGE VDDIO;
+  MEM_NB_BLOCK *NBPtr;
+  MEM_PARAMETER_STRUCT *ParameterPtr;
+  MEM_SHARED_DATA *mmSharedPtr;
+  PLATFORM_POWER_POLICY PowerPolicy;
+
+  NBPtr = MemMainPtr->NBPtr;
+  mmSharedPtr = MemMainPtr->mmSharedPtr;
+  ParameterPtr = MemMainPtr->MemPtr->ParameterListPtr;
+  PowerPolicy = MemMainPtr->MemPtr->PlatFormConfig->PlatformProfile.PlatformPowerPolicy;
+
+  IDS_OPTION_HOOK (IDS_MEMORY_POWER_POLICY, &PowerPolicy, &NBPtr->MemPtr->StdHeader);
+  IDS_HDT_CONSOLE (MEM_FLOW, (PowerPolicy == Performance) ? "\nMaximize Performance\n" : "\nMaximize Battery Life\n");
+
+  if (ParameterPtr->DDR3Voltage != VOLT_INITIAL) {
+    mmSharedPtr->VoltageMap = VDDIO_DETERMINED;
+    PutEventLog (AGESA_WARNING, MEM_WARNING_INITIAL_DDR3VOLT_NONZERO, 0, 0, 0, 0, &(NBPtr[BSP_DIE].MemPtr->StdHeader));
+    SetMemError (AGESA_WARNING, NBPtr[BSP_DIE].MCTPtr);
+    IDS_HDT_CONSOLE (MEM_FLOW, "Warning: Initial Value for VDDIO has been changed.\n");
+    RetVal = TRUE;
+  } else {
+    RetVal = MemMLvDdr3 (MemMainPtr);
+
+    VDDIO = ParameterPtr->DDR3Voltage;
+    if (NBPtr->IsSupported[PerformanceOnly] || ((PowerPolicy == Performance) && (mmSharedPtr->VoltageMap != 0))) {
+      // When there is no commonly supported voltage, do not optimize performance
+      // For cases where we can maximize performance, do the following
+      // When VDDIO is enforced, DDR3Voltage will be overriden by specific VDDIO
+      // So cases with DDR3Voltage left to be VOLT_UNSUPPORTED will be open to maximizing performance.
+      ParameterPtr->DDR3Voltage = VOLT_UNSUPPORTED;
+    }
+
+    IDS_OPTION_HOOK (IDS_ENFORCE_VDDIO, &(ParameterPtr->DDR3Voltage), &NBPtr->MemPtr->StdHeader);
+
+    if (ParameterPtr->DDR3Voltage != VOLT_UNSUPPORTED) {
+      // When Voltage is already determined, do not have further process to choose maximum frequency to optimize performance
+      mmSharedPtr->VoltageMap = VDDIO_DETERMINED;
+      IDS_HDT_CONSOLE (MEM_FLOW, "VDDIO is determined. No further optimization will be done.\n");
+    } else {
+      for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+        NBPtr[Node].MaxFreqVDDIO[VOLT1_5_ENCODED_VAL] = UNSUPPORTED_DDR_FREQUENCY;
+        NBPtr[Node].MaxFreqVDDIO[VOLT1_35_ENCODED_VAL] = UNSUPPORTED_DDR_FREQUENCY;
+        NBPtr[Node].MaxFreqVDDIO[VOLT1_25_ENCODED_VAL] = UNSUPPORTED_DDR_FREQUENCY;
+      }
+      // Reprogram the leveling result as temporal candidate
+      ParameterPtr->DDR3Voltage = VDDIO;
+    }
+  }
+
+  ASSERT (ParameterPtr->DDR3Voltage != VOLT_UNSUPPORTED);
+  return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Finalize the VDDIO for the board for performance enhancement.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMLvDdr3PerformanceEnhFinalize (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 Node;
+  UINT8 NodeCnt[VOLT1_25 + 1];
+  UINT8 MaxCnt;
+  MEM_NB_BLOCK *NBPtr;
+  MEM_PARAMETER_STRUCT *ParameterPtr;
+  MEM_SHARED_DATA *mmSharedPtr;
+  UINT8 CurrentVoltage;
+  DIMM_VOLTAGE Voltage;
+  MEMORY_BUS_SPEED HighestFreq;
+
+  ParameterPtr = MemMainPtr->MemPtr->ParameterListPtr;
+  mmSharedPtr = MemMainPtr->mmSharedPtr;
+  NBPtr = MemMainPtr->NBPtr;
+
+  LibAmdMemFill (NodeCnt, 0, VOLT1_25_ENCODED_VAL + 1, &NBPtr->MemPtr->StdHeader);
+  if (mmSharedPtr->VoltageMap != VDDIO_DETERMINED) {
+    Voltage = ParameterPtr->DDR3Voltage;
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nSearching for VDDIO that can maximize frequency: \n");
+    for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+      HighestFreq = 0;
+      // Find out what the highest frequency that can be reached is on this node across different voltage.
+      for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
+        if (HighestFreq < NBPtr[Node].MaxFreqVDDIO[CurrentVoltage]) {
+          HighestFreq = NBPtr[Node].MaxFreqVDDIO[CurrentVoltage];
+        }
+      }
+      IDS_HDT_CONSOLE (MEM_FLOW, "Node%d: 1.5V -> %dMHz, 1.35V -> %dMHz, 1.25V -> %dMHz\n", Node, NBPtr[Node].MaxFreqVDDIO[VOLT1_5_ENCODED_VAL], NBPtr[Node].MaxFreqVDDIO[VOLT1_35_ENCODED_VAL], NBPtr[Node].MaxFreqVDDIO[VOLT1_25_ENCODED_VAL]);
+      // Figure out what voltage we can have when attaining the highest frequency.
+      for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
+        if (NBPtr[Node].MaxFreqVDDIO[CurrentVoltage] == HighestFreq) {
+          NodeCnt[CurrentVoltage] ++;
+        }
+      }
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "Number of nodes that can run at maximize performance: 1.5V -> %d Nodes 1.35V -> %d Nodes 1.25V -> %d Nodes.\n", NodeCnt[VOLT1_5_ENCODED_VAL], NodeCnt[VOLT1_35_ENCODED_VAL], NodeCnt[VOLT1_25_ENCODED_VAL]);
+    MaxCnt = 0;
+    // Use the VDDIO at which most nodes can run at higher frequency
+    for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
+      if (MaxCnt <= NodeCnt[CurrentVoltage]) {
+        MaxCnt = NodeCnt[CurrentVoltage];
+        ParameterPtr->DDR3Voltage = CONVERT_ENCODED_TO_VDDIO (CurrentVoltage);
+      }
+    }
+
+    ASSERT (ParameterPtr->DDR3Voltage != VOLT_UNSUPPORTED);
+
+    mmSharedPtr->VoltageMap = VDDIO_DETERMINED;
+    if (Voltage != ParameterPtr->DDR3Voltage) {
+      // Finalize frequency with updated finalized VDDIO
+      for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+        // Need to re-sync target speed and different VDDIO may cause different settings
+        NBPtr[Node].TechPtr->SpdGetTargetSpeed (NBPtr[Node].TechPtr);
+        for (Dct = 0; Dct < NBPtr[Node].DctCount; Dct++) {
+          NBPtr[Node].SwitchDCT (&(NBPtr[Node]), Dct);
+          if (NBPtr[Node].DCTPtr->Timings.CsEnabled != 0) {
+            if (!NBPtr[Node].PlatformSpec (&(NBPtr[Node]))) {
+              return FALSE;
+            }
+          }
+        }
+      }
+    }
+  }
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmLvDdr3.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmLvDdr3.h
new file mode 100644
index 0000000000..64aeeb5108
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmLvDdr3.h
@@ -0,0 +1,86 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmLvDdr3.h
+ *
+ * Main low voltage DDR3 support common header
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 37291 $ @e \$Date: 2010-09-01 13:55:44 -0500 (Wed, 01 Sep 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MMLVDDR3_H_
+#define _MMLVDDR3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMLvDdr3 (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+BOOLEAN
+MemMLvDdr3PerformanceEnhPre (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+BOOLEAN
+MemMLvDdr3PerformanceEnhFinalize (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+#endif  /* _MMLVDDR3_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmMemClr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmMemClr.c
new file mode 100644
index 0000000000..921fb90477
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmMemClr.c
@@ -0,0 +1,119 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmMemclr.c
+ *
+ * Main Memory Feature implementation file for Memory Clear.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 53955 $ @e \$Date: 2011-05-29 20:54:54 -0600 (Sun, 29 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "mfmemclr.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMMEMCLR_FILECODE
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMMctMemClr (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Initiates/synchronizes memory clear on all nodes with Dram on it.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMMctMemClr (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  UINT8   NodeCnt;
+  BOOLEAN RetVal;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = MemMainPtr->NBPtr;
+  NodeCnt = MemMainPtr->DieCount;
+  RetVal = TRUE;
+
+  IDS_OPTION_HOOK (IDS_BEFORE_MEMCLR, NULL, &NBPtr->MemPtr->StdHeader);
+
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFMctMemClr_Init (&NBPtr[Node]);
+  }
+
+  for (Node = 0; Node < NodeCnt; Node++) {
+    MemFMctMemClr_Sync (&NBPtr[Node]);
+    RetVal &= (BOOLEAN) (NBPtr[Node].MCTPtr->ErrCode < AGESA_FATAL);
+  }
+
+  return RetVal;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmMemRestore.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmMemRestore.c
new file mode 100644
index 0000000000..df1c1d7efb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmMemRestore.c
@@ -0,0 +1,607 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmMemRestore.c
+ *
+ * Main Memory Feature implementation file for Node Interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMMEMRESTORE_FILECODE
+
+#define ST_PRE_ESR  0
+#define ST_POST_ESR 1
+#define ST_DONE     2
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemMRestoreDqsTimings (
+  IN       VOID                *Storage,
+  IN       MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+BOOLEAN
+STATIC
+MemMSetCSRNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       PCI_SPECIAL_CASE *SpecialCases,
+  IN       PCI_ADDR PciAddr,
+  IN       UINT32 Value
+  );
+
+VOID
+STATIC
+MemMCreateS3NbBlock (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr,
+     OUT   S3_MEM_NB_BLOCK **S3NBPtr
+  );
+
+VOID
+MemMContextSave (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+BOOLEAN
+MemMContextRestore (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+extern MEM_NB_SUPPORT memNBInstalled[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Check and save memory context if possible.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+VOID
+MemMContextSave (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8 Node;
+  UINT8 i;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  LOCATE_HEAP_PTR LocHeap;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  DEVICE_BLOCK_HEADER *DeviceList;
+  AMD_CONFIG_PARAMS *StdHeader;
+  UINT32 BufferSize;
+  VOID *BufferOffset;
+  MEM_NB_BLOCK  *NBArray;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+  DESCRIPTOR_GROUP DeviceDescript[MAX_NODES_SUPPORTED];
+
+  NBArray = MemMainPtr->NBPtr;
+  RefPtr = NBArray[BSP_DIE].RefPtr;
+
+  if (RefPtr->SaveMemContextCtl) {
+    RefPtr->MemContext.NvStorage = NULL;
+    RefPtr->MemContext.NvStorageSize = 0;
+
+    // Make sure DQS training has occurred before saving memory context
+    if (!RefPtr->MemRestoreCtl) {
+      StdHeader = &MemMainPtr->MemPtr->StdHeader;
+
+      MemMCreateS3NbBlock (MemMainPtr, &S3NBPtr);
+      if (S3NBPtr != NULL) {
+        // Get the mask bit and the register list for node that presents
+        BufferSize = 0;
+        for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+          S3NBPtr->MemS3GetConPCIMask (&NBArray[Node], (VOID *)&DeviceDescript[Node]);
+          S3NBPtr->MemS3GetConMSRMask (&NBArray[Node], (VOID *)&DeviceDescript[Node]);
+          BufferSize += S3NBPtr->MemS3GetRegLstPtr (&NBArray[Node], (VOID *)&DeviceDescript[Node]);
+        }
+
+        // Base on the size of the device list, apply for a buffer for it.
+        AllocHeapParams.RequestedBufferSize = (UINT32) (BufferSize + sizeof (DEVICE_BLOCK_HEADER));
+        AllocHeapParams.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+        AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+        if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+          DeviceList = (DEVICE_BLOCK_HEADER *) AllocHeapParams.BufferPtr;
+          DeviceList->RelativeOrMaskOffset = (UINT16) AllocHeapParams.RequestedBufferSize;
+
+          // Copy device list on the stack to the heap.
+          BufferOffset = sizeof (DEVICE_BLOCK_HEADER) + AllocHeapParams.BufferPtr;
+          for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+            for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+              // Copy PCI device descriptor to the heap if it exists.
+              if (DeviceDescript[Node].PCIDevice[i].RegisterListID != 0xFFFFFFFF) {
+                LibAmdMemCopy (BufferOffset, &(DeviceDescript[Node].PCIDevice[i]), sizeof (PCI_DEVICE_DESCRIPTOR), StdHeader);
+                DeviceList->NumDevices ++;
+                BufferOffset = sizeof (PCI_DEVICE_DESCRIPTOR) + (UINT8 *)BufferOffset;
+              }
+              // Copy conditional PCI device descriptor to the heap if it exists.
+              if (DeviceDescript[Node].CPCIDevice[i].RegisterListID != 0xFFFFFFFF) {
+                LibAmdMemCopy (BufferOffset, &(DeviceDescript[Node].CPCIDevice[i]), sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR), StdHeader);
+                DeviceList->NumDevices ++;
+                BufferOffset = sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR) + (UINT8 *)BufferOffset;
+              }
+              // Copy MSR device descriptor to the heap if it exists.
+              if (DeviceDescript[Node].MSRDevice[i].RegisterListID != 0xFFFFFFFF) {
+                LibAmdMemCopy (BufferOffset, &(DeviceDescript[Node].MSRDevice[i]), sizeof (MSR_DEVICE_DESCRIPTOR), StdHeader);
+                DeviceList->NumDevices ++;
+                BufferOffset = sizeof (MSR_DEVICE_DESCRIPTOR) + (UINT8 *)BufferOffset;
+              }
+              // Copy conditional MSR device descriptor to the heap if it exists.
+              if (DeviceDescript[Node].CMSRDevice[i].RegisterListID != 0xFFFFFFFF) {
+                LibAmdMemCopy (BufferOffset, &(DeviceDescript[Node].PCIDevice[i]), sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR), StdHeader);
+                DeviceList->NumDevices ++;
+                BufferOffset = sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR) + (UINT8 *)BufferOffset;
+              }
+            }
+          }
+
+          // Determine size needed
+          BufferSize = GetWorstCaseContextSize (DeviceList, INIT_RESUME, StdHeader);
+          AllocHeapParams.RequestedBufferSize = BufferSize;
+          AllocHeapParams.BufferHandle = AMD_S3_SAVE_HANDLE;
+          AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+          if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+            // Save memory context
+            SaveDeviceListContext (DeviceList, AllocHeapParams.BufferPtr, INIT_RESUME, &BufferSize, StdHeader);
+            RefPtr->MemContext.NvStorageSize = BufferSize;
+          }
+
+          HeapDeallocateBuffer (AMD_MEM_S3_DATA_HANDLE, StdHeader);
+        }
+      }
+      HeapDeallocateBuffer (AMD_MEM_S3_NB_HANDLE, StdHeader);
+
+      // Locate MemContext since it might have been shifted after deallocating
+      LocHeap.BufferHandle = AMD_S3_SAVE_HANDLE;
+      if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+        RefPtr->MemContext.NvStorage = LocHeap.BufferPtr;
+      }
+    }
+  }
+
+  for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+    NBArray[Node].FamilySpecificHook[AfterSaveRestore] (&NBArray[Node], &NBArray[Node]);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Check and restore memory context if possible.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  DQS timing restore succeeds.
+ *     @return          FALSE - DQS timing restore fails.
+ */
+BOOLEAN
+MemMContextRestore (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8 Node;
+  MEM_NB_BLOCK  *NBArray;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+
+  NBArray = MemMainPtr->NBPtr;
+  RefPtr = NBArray[BSP_DIE].RefPtr;
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Mem Restore\n");
+  if (RefPtr->MemRestoreCtl) {
+    if (RefPtr->MemContext.NvStorage != NULL) {
+      MemMCreateS3NbBlock (MemMainPtr, &S3NBPtr);
+      if (S3NBPtr != NULL) {
+        // Check DIMM config and restore DQS timings if possible
+        if (!MemMRestoreDqsTimings (RefPtr->MemContext.NvStorage, MemMainPtr)) {
+          RefPtr->MemRestoreCtl = FALSE;
+        }
+      } else {
+        RefPtr->MemRestoreCtl = FALSE;
+      }
+      HeapDeallocateBuffer (AMD_MEM_S3_NB_HANDLE, &(MemMainPtr->MemPtr->StdHeader));
+    } else {
+      RefPtr->MemRestoreCtl = FALSE;
+    }
+  }
+
+  for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+    NBArray[Node].FamilySpecificHook[AfterSaveRestore] (&NBArray[Node], &NBArray[Node]);
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, RefPtr->MemRestoreCtl ? "Mem Restore Succeeds!\n" : "Mem Restore Fails!\n");
+  return RefPtr->MemRestoreCtl;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores all devices that contains DQS timings
+ *
+ *     @param[in]     Storage        Beginning of the device list.
+ *     @param[in,out]   MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ *
+ */
+BOOLEAN
+STATIC
+MemMRestoreDqsTimings (
+  IN       VOID                *Storage,
+  IN       MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  AMD_CONFIG_PARAMS *StdHeader;
+  UINT8 *OrMask;
+  DEVICE_DESCRIPTORS Device;
+  INT16 i;
+  INT16 j;
+  DEVICE_BLOCK_HEADER *DeviceList;
+  PCI_REGISTER_BLOCK_HEADER *Reg;
+  CPCI_REGISTER_BLOCK_HEADER *CReg;
+  MSR_REGISTER_BLOCK_HEADER *MsrReg;
+  CMSR_REGISTER_BLOCK_HEADER *CMsrReg;
+  PCI_ADDR PciAddress;
+  MEM_NB_BLOCK  *NBArray;
+  UINT8 State;
+  UINT8 Node;
+  UINT8 Dct;
+  UINT8 MaxNode;
+
+  NBArray = MemMainPtr->NBPtr;
+  StdHeader = &(MemMainPtr->MemPtr->StdHeader);
+  DeviceList = (DEVICE_BLOCK_HEADER *) Storage;
+  Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+  OrMask = (UINT8 *) DeviceList + DeviceList->RelativeOrMaskOffset;
+
+  if (DeviceList->NumDevices == 0) {
+    return FALSE;
+  }
+
+  MaxNode = 0;
+  State = ST_PRE_ESR;
+  for (i = 0; State != ST_DONE; i++) {
+    if (((State == ST_PRE_ESR) && (Device.CommonDeviceHeader->Type == DEV_TYPE_PCI_PRE_ESR)) ||
+        ((State == ST_POST_ESR) && (Device.CommonDeviceHeader->Type == DEV_TYPE_PCI))) {
+      MemFS3GetPciDeviceRegisterList (Device.PciDevice, &Reg, StdHeader);
+      Node = Device.PciDevice->Node;
+      IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Node);
+      PciAddress = NBArray[Node].PciAddr;
+      for (j = 0; j < Reg->NumRegisters; j++) {
+        PciAddress.Address.Function = Reg->RegisterList[j].Function;
+        PciAddress.Address.Register = Reg->RegisterList[j].Offset;
+        PciAddress.Address.Segment = (Reg->RegisterList[j].Type.SpecialCaseFlag != 0) ?
+                                     0xF - Reg->RegisterList[j].Type.SpecialCaseIndex : 0;
+        if (!MemMSetCSRNb (&NBArray[Node], Reg->SpecialCases, PciAddress, *((UINT32 *) OrMask) & Reg->RegisterList[j].AndMask)) {
+          return FALSE;   // Restore fails
+        }
+        OrMask += (Reg->RegisterList[j].Type.RegisterSize == 0) ? 4 : Reg->RegisterList[j].Type.RegisterSize;
+      }
+
+      if (MaxNode < Node) {
+        MaxNode = Node;
+      }
+
+    } else if (((State == ST_PRE_ESR) && (Device.CommonDeviceHeader->Type == DEV_TYPE_CPCI_PRE_ESR)) ||
+               ((State == ST_POST_ESR) && (Device.CommonDeviceHeader->Type == DEV_TYPE_CPCI))) {
+      MemFS3GetCPciDeviceRegisterList (Device.CPciDevice, &CReg, StdHeader);
+      Node = Device.CPciDevice->Node;
+      IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Node);
+      PciAddress = NBArray[Node].PciAddr;
+      for (j = 0; j < CReg->NumRegisters; j++) {
+        if (((Device.CPciDevice->Mask1 & CReg->RegisterList[j].Mask1) != 0) &&
+            ((Device.CPciDevice->Mask2 & CReg->RegisterList[j].Mask2) != 0)) {
+          PciAddress.Address.Function = CReg->RegisterList[j].Function;
+          PciAddress.Address.Register = CReg->RegisterList[j].Offset;
+          PciAddress.Address.Segment = (CReg->RegisterList[j].Type.SpecialCaseFlag != 0) ?
+                                       0xF - CReg->RegisterList[j].Type.SpecialCaseIndex : 0;
+          if (!MemMSetCSRNb (&NBArray[Node], CReg->SpecialCases, PciAddress, *((UINT32 *) OrMask) & CReg->RegisterList[j].AndMask)) {
+            return FALSE;   // Restore fails
+          }
+          OrMask += (CReg->RegisterList[j].Type.RegisterSize == 0) ? 4 : CReg->RegisterList[j].Type.RegisterSize;
+        }
+      }
+    } else if (((State == ST_PRE_ESR) && (Device.CommonDeviceHeader->Type == DEV_TYPE_MSR_PRE_ESR)) ||
+               ((State == ST_POST_ESR) && (Device.CommonDeviceHeader->Type == DEV_TYPE_MSR))) {
+      MemFS3GetMsrDeviceRegisterList (Device.MsrDevice, &MsrReg, StdHeader);
+      for (j = 0; j < MsrReg->NumRegisters; j++) {
+        OrMask += 8;
+      }
+    } else if (((State == ST_PRE_ESR) && (Device.CommonDeviceHeader->Type == DEV_TYPE_CMSR_PRE_ESR)) ||
+               ((State == ST_POST_ESR) && (Device.CommonDeviceHeader->Type == DEV_TYPE_CMSR))) {
+      MemFS3GetCMsrDeviceRegisterList (Device.CMsrDevice, &CMsrReg, StdHeader);
+      for (j = 0; j < CMsrReg->NumRegisters; j++) {
+        if (((Device.CMsrDevice->Mask1 & CMsrReg->RegisterList[j].Mask1) != 0) &&
+            ((Device.CMsrDevice->Mask2 & CMsrReg->RegisterList[j].Mask2) != 0)) {
+          OrMask += 8;
+        }
+      }
+    }
+
+    switch (Device.CommonDeviceHeader->Type) {
+    case DEV_TYPE_PCI_PRE_ESR:
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_PCI:
+      Device.PciDevice++;
+      break;
+    case DEV_TYPE_CPCI_PRE_ESR:
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_CPCI:
+      Device.CPciDevice++;
+      break;
+    case DEV_TYPE_MSR_PRE_ESR:
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_MSR:
+      Device.MsrDevice++;
+      break;
+    case DEV_TYPE_CMSR_PRE_ESR:
+      // Fall through to advance the pointer after restoring context
+    case DEV_TYPE_CMSR:
+      Device.CMsrDevice++;
+      break;
+    default:
+      ASSERT (FALSE);
+      break;
+    }
+
+    if (i == (DeviceList->NumDevices - 1)) {
+      // Go to next state
+      State++;
+      i = -1;
+      Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+
+      // Check to see if processor or DIMM population has changed
+      if ((MaxNode + 1) != MemMainPtr->DieCount) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "\tSTOP: Population changed\n");
+        return FALSE;
+      }
+
+      // Perform MemClk frequency change
+      for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+        if (NBArray[Node].MCTPtr->NodeMemSize != 0) {
+          NBArray[Node].BeforeDqsTraining (&NBArray[Node]);
+          if (NBArray[Node].DCTPtr->Timings.Speed < NBArray[Node].DCTPtr->Timings.TargetSpeed) {
+            for (Dct = 0; Dct < NBArray[Node].DctCount; Dct++) {
+              NBArray[Node].SwitchDCT (&NBArray[Node], Dct);
+              NBArray[Node].DCTPtr->Timings.Speed = NBArray[Node].DCTPtr->Timings.TargetSpeed;
+            }
+            IDS_OPTION_HOOK (IDS_BEFORE_MEM_FREQ_CHG, &NBArray[Node], &(MemMainPtr->MemPtr->StdHeader));
+            NBArray[Node].ChangeFrequency (&NBArray[Node]);
+          }
+        }
+      }
+    }
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function filters out other settings and only restores DQS timings.
+ *
+ *     @param[in,out]   NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   SpecialCases - Pointer to special cases array handlers
+ *     @param[in]   PciAddr - address of the CSR register in PCI_ADDR format.
+ *     @param[in]   Value - Value to be programmed
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemMSetCSRNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       PCI_SPECIAL_CASE *SpecialCases,
+  IN       PCI_ADDR PciAddr,
+  IN       UINT32 Value
+  )
+{
+  UINT32 Offset;
+  UINT8  Dct;
+  UINT32 Temp;
+  BOOLEAN RetVal;
+  UINT32 BOffset;
+
+  RetVal = TRUE;
+  if (PciAddr.Address.Segment != 0) {
+    if (PciAddr.Address.Segment == 0xF) {
+      PciAddr.Address.Segment = 0;
+      Dct = (UINT8) ((PciAddr.Address.Register >> 10) & 1);
+      Offset = PciAddr.Address.Register & 0x3FF;
+      BOffset = PciAddr.Address.Register & 0xFF;
+      if ((PciAddr.Address.Register & 0x800) == 0) {
+        if (((BOffset >= 1) && (BOffset <= 3)) ||
+            ((BOffset >= 5) && (BOffset <= 7)) ||
+            ((Offset >= 0x10) && (Offset <= 0x2B)) ||
+            ((Offset >= 0x30) && (Offset <= 0x4A))) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t\tF2_%d9C_%03x = %08x\n", Dct, Offset, Value);
+          //MemNS3SetCSR
+          SpecialCases[0].Restore (AccessS3SaveWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+        }
+      }
+    }
+  } else {
+    Dct = (UINT8) ((PciAddr.Address.Register >> 8) & 1);
+    Offset = PciAddr.Address.Register & 0xFF;
+
+    if (PciAddr.Address.Function == 2) {
+      if ((Offset >= 0x40) && (Offset < 0x60) && ((Value & 4) != 0)) {
+        // If TestFail bit is set, set CsTestFail
+        NBPtr->SwitchDCT (NBPtr, Dct);
+        NBPtr->DCTPtr->Timings.CsTrainFail |= (UINT16)1 << ((Offset - 0x40) >> 2);
+        IDS_HDT_CONSOLE (MEM_FLOW, "\tBad CS:%d\n", ((Offset - 0x40) >> 2));
+      } else if (Offset == 0x80) {
+        LibAmdPciRead (AccessWidth32, PciAddr, &Temp, &NBPtr->MemPtr->StdHeader);
+        if (Temp != Value) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "\tSTOP: DIMM config changed\n");
+          RetVal = FALSE;
+        }
+      } else if (Offset == 0x90) {
+        LibAmdPciRead (AccessWidth32, PciAddr, &Temp, &NBPtr->MemPtr->StdHeader);
+        if ((Temp & 0x0001F000) != (Value & 0x0001F000)) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "\tSTOP: DIMM config changed\n");
+          RetVal = FALSE;
+        }
+      } else if (Offset == 0x94) {
+        LibAmdPciRead (AccessWidth32, PciAddr, &Temp, &NBPtr->MemPtr->StdHeader);
+        if ((Temp & 0x00061000) != (Value & 0x00061000)) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "\tSTOP: DIMM config changed\n");
+          RetVal = FALSE;
+        }
+        if (((Value & 0x4000) == 0) && (NBPtr->GetMemClkFreqId (NBPtr, NBPtr->DCTPtr->Timings.TargetSpeed) != ((Value & 7) + 1))) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "\tSTOP: MemClk has changed\n");
+          RetVal = FALSE;
+        }
+        // Restore ZqcsInterval
+        Temp &= 0xFFFFF3FF;
+        Temp |= (Value & 0x00000C00);
+        LibAmdPciWrite (AccessWidth32, PciAddr, &Temp, &NBPtr->MemPtr->StdHeader);
+      } else if (Offset == 0x78) {
+        // Program MaxRdLat
+        LibAmdPciRead (AccessWidth32, PciAddr, &Temp, &NBPtr->MemPtr->StdHeader);
+        Temp &= 0x0009BF0F;
+        Temp |= (Value & 0xFFC00000);
+        LibAmdPciWrite (AccessWidth32, PciAddr, &Temp, &NBPtr->MemPtr->StdHeader);
+      } else if (PciAddr.Address.Register == 0x110) {
+        if ((NBPtr->MCTPtr->NodeMemSize != 0) && (Value == 0x00000100)) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "\tSTOP: DIMM config changed\n");
+          RetVal = FALSE;
+        }
+      }
+    }
+  }
+
+  if (RetVal == FALSE) {
+    NBPtr->SwitchDCT (NBPtr, 0);
+    NBPtr->DCTPtr->Timings.CsTrainFail = 0;
+    NBPtr->SwitchDCT (NBPtr, 1);
+    NBPtr->DCTPtr->Timings.CsTrainFail = 0;
+  }
+
+  return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Create S3 NB Block.
+ *
+ *     @param[in,out]   MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *     @param[out]      S3NBPtr   - Pointer to the S3 NB Block pointer
+ *
+ */
+VOID
+STATIC
+MemMCreateS3NbBlock (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr,
+     OUT   S3_MEM_NB_BLOCK **S3NBPtr
+  )
+{
+  UINT8 Node;
+  UINT8 i;
+  MEM_NB_BLOCK  *NBArray;
+  MEM_NB_BLOCK  *DummyNBs;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  NBArray = MemMainPtr->NBPtr;
+
+  *S3NBPtr = NULL;
+
+  // Allocate heap for S3 NB Blocks
+  AllocHeapParams.RequestedBufferSize = (MemMainPtr->DieCount * (sizeof (S3_MEM_NB_BLOCK) + sizeof (MEM_NB_BLOCK)));
+  AllocHeapParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &(MemMainPtr->MemPtr->StdHeader)) == AGESA_SUCCESS) {
+    *S3NBPtr = (S3_MEM_NB_BLOCK *) AllocHeapParams.BufferPtr;
+    DummyNBs = (MEM_NB_BLOCK *) (AllocHeapParams.BufferPtr + MemMainPtr->DieCount * sizeof (S3_MEM_NB_BLOCK));
+
+    // Initialize S3 NB Blocks
+    for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+      (*S3NBPtr)[Node].NBPtr = &DummyNBs[Node];
+
+      for (i = 0; memNBInstalled[i].MemS3ResumeConstructNBBlock != 0; i++) {
+        if (memNBInstalled[i].MemS3ResumeConstructNBBlock (&(*S3NBPtr)[Node], NBArray[BSP_DIE].MemPtr, Node)) {
+          break;
+        }
+      };
+      if (memNBInstalled[i].MemS3ResumeConstructNBBlock == 0) {
+        *S3NBPtr = NULL;
+        break;
+      }
+    }
+  }
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmNodeInterleave.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmNodeInterleave.c
new file mode 100644
index 0000000000..442ea38354
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmNodeInterleave.c
@@ -0,0 +1,147 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmNodeInterleave.c
+ *
+ * Main Memory Feature implementation file for Node Interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 53955 $ @e \$Date: 2011-05-29 20:54:54 -0600 (Sun, 29 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMNODEINTERLEAVE_FILECODE
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMInterleaveNodes (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Check and enable node interleaving on all nodes.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMInterleaveNodes (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  UINT8   NodeCnt;
+  BOOLEAN RetVal;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = MemMainPtr->NBPtr;
+  NodeCnt = 0;
+  RetVal = TRUE;
+
+  if (NBPtr->RefPtr->EnableNodeIntlv) {
+    if (!MemFeatMain.MemClr (MemMainPtr)) {
+      PutEventLog (AGESA_WARNING, MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_WARNING, NBPtr->MCTPtr);
+      return FALSE;
+    }
+
+    MemMainPtr->mmSharedPtr->NodeIntlv.IsValid = FALSE;
+    MemMainPtr->mmSharedPtr->NodeIntlv.NodeIntlvSel = 0;
+
+    for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+      if (!NBPtr[Node].FeatPtr->CheckInterleaveNodes (&NBPtr[Node])) {
+        break;
+      }
+      if (NBPtr[Node].MCTPtr->NodeMemSize != 0) {
+        NodeCnt ++;
+      }
+    }
+
+    if ((Node == MemMainPtr->DieCount) && (NodeCnt != 0) && ((NodeCnt & (NodeCnt - 1)) == 0)) {
+      MemMainPtr->mmSharedPtr->NodeIntlv.NodeCnt = NodeCnt;
+      for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+        if (NBPtr[Node].MCTPtr->NodeMemSize != 0) {
+          NBPtr[Node].FeatPtr->InterleaveNodes (&NBPtr[Node]);
+        }
+      }
+      for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+        NBPtr[Node].SyncAddrMapToAllNodes (&NBPtr[Node]);
+        RetVal &= (BOOLEAN) (NBPtr[Node].MCTPtr->ErrCode < AGESA_FATAL);
+      }
+    } else {
+      //
+      // If all nodes cannot be interleaved
+      //
+      PutEventLog (AGESA_WARNING, MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_WARNING, NBPtr->MCTPtr);
+    }
+  }
+
+  return RetVal;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmOnlineSpare.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmOnlineSpare.c
new file mode 100644
index 0000000000..6aff611178
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmOnlineSpare.c
@@ -0,0 +1,166 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmOnlineSpare.c
+ *
+ * Main Memory Feature implementation file for Node Interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 53955 $ @e \$Date: 2011-05-29 20:54:54 -0600 (Sun, 29 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMONLINESPARE_FILECODE
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMOnlineSpare (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Check and enable online spare on all nodes.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMOnlineSpare (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT8   Node;
+  BOOLEAN IsEnabled;
+  UINT8   FirstEnabledNode;
+  UINT32  BottomIO;
+  BOOLEAN RetVal;
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+
+  AGESA_TESTPOINT (TpProcMemOnlineSpareInit, &(MemMainPtr->MemPtr->StdHeader));
+  FirstEnabledNode = 0;
+  IsEnabled = FALSE;
+  RetVal = TRUE;
+  NBPtr = MemMainPtr->NBPtr;
+  RefPtr = NBPtr[BSP_DIE].RefPtr;
+
+  for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+    if (NBPtr[Node].FeatPtr->OnlineSpare (&NBPtr[Node])) {
+      if (!IsEnabled) {
+        // Record the first node that has spared dimm enabled
+        FirstEnabledNode = Node;
+        IsEnabled = TRUE;
+      }
+    }
+  }
+
+  if (IsEnabled) {
+    NBPtr[BSP_DIE].SharedPtr->CurrentNodeSysBase = 0;
+    BottomIO = (NBPtr[BSP_DIE].RefPtr->BottomIo & 0xF8) << 8;
+    // If the first node that has spared dimms does not have a system base smaller
+    // than bottomIO, then we don't need to reset the GStatus, as we don't need to
+    // remap memory hole.
+    if (NBPtr[FirstEnabledNode].MCTPtr->NodeSysBase < BottomIO) {
+      RefPtr->GStatus[GsbHWHole] = FALSE;
+      RefPtr->GStatus[GsbSpIntRemapHole] = FALSE;
+      RefPtr->GStatus[GsbSoftHole] = FALSE;
+      RefPtr->HoleBase = 0;
+    }
+
+    for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+      if (Node >= FirstEnabledNode) {
+        // Remap memory on nodes with node number larger than the first node that has spared dimms.
+        NBPtr[Node].MCTPtr->Status[SbHWHole] = FALSE;
+        NBPtr[Node].MCTPtr->Status[SbSWNodeHole] = FALSE;
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelBaseAddr, 0);
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelHiRngEn, 0);
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelHi, 0);
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelBaseOffset, 0);
+        NBPtr[Node].SetBitField (&NBPtr[Node], BFDramHoleAddrReg, 0);
+        NBPtr[Node].HtMemMapInit (&NBPtr[Node]);
+      } else {
+        // No change is needed in the memory map of this node.
+        // Need to adjust the current system base for other nodes processed later.
+        NBPtr[Node].SharedPtr->CurrentNodeSysBase = (NBPtr[Node].MCTPtr->NodeSysLimit + 1) & 0xFFFFFFF0;
+        // If the current node does not have the memory hole, then set DramHoleAddrReg to be 0.
+        // If memory hoisting is enabled later by other node, SyncAddrMapToAllNodes will set the base
+        // and DramMemHoistValid.
+        // Otherwise, do not change the register value, as we need to keep DramHoleOffset unchanged, as well
+        // DramHoleValid.
+        if (!NBPtr[Node].MCTPtr->Status[SbHWHole]) {
+          NBPtr[Node].SetBitField (&NBPtr[Node], BFDramHoleAddrReg, 0);
+        }
+      }
+    }
+
+    for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+      NBPtr[Node].SyncAddrMapToAllNodes (&NBPtr[Node]);
+      RetVal &= (BOOLEAN) (NBPtr[Node].MCTPtr->ErrCode < AGESA_FATAL);
+    }
+    NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE]);
+  }
+  return RetVal;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmParallelTraining.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmParallelTraining.c
new file mode 100644
index 0000000000..c99d48558e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmParallelTraining.c
@@ -0,0 +1,289 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmNodeInterleave.c
+ *
+ * Main Memory Feature implementation file for Node Interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 53955 $ @e \$Date: 2011-05-29 20:54:54 -0600 (Sun, 29 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuApicUtilities.h"
+#include "GeneralServices.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "ma.h"
+#include "mu.h"
+#include "mfParallelTraining.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMPARALLELTRAINING_FILECODE
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemMParallelTraining (
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmPtr
+  );
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *
+ *
+ *     @param[in,out]   *mmPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMParallelTraining (
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmPtr
+  )
+{
+  AMD_CONFIG_PARAMS *StdHeader;
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK *NBPtr;
+  DIE_INFO TrainInfo[MAX_NODES_SUPPORTED];
+  AP_DATA_TRANSFER ReturnData;
+  AGESA_STATUS Status;
+  UINT8 ApSts;
+  UINT8 Die;
+  UINT8 Socket;
+  UINT32 Module;
+  UINT32 LowCore;
+  UINT32 HighCore;
+  UINT32 Time;
+  UINT32 TimeOut;
+  UINT32 TargetApicId;
+  BOOLEAN StillTraining;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  UINT8 *BufferPtr;
+  BOOLEAN TimeoutEn;
+
+  NBPtr = mmPtr->NBPtr;
+  MemPtr = mmPtr->MemPtr;
+  StdHeader = &(mmPtr->MemPtr->StdHeader);
+  Time = 0;
+  TimeOut = PARALLEL_TRAINING_TIMEOUT;
+  TimeoutEn = TRUE;
+  IDS_TIMEOUT_CTL (&TimeoutEn);
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart parallel training\n");
+  AGESA_TESTPOINT (TpProcMemBeforeAnyTraining, StdHeader);
+  //
+  // Initialize Training Info Array
+  //
+  for (Die = 0; Die < mmPtr->DieCount; Die ++) {
+    Socket = TrainInfo[Die].Socket = NBPtr[Die].MCTPtr->SocketId;
+    Module = NBPtr[Die].MCTPtr->DieId;
+    GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader);
+    TrainInfo[Die].Core = (UINT8) (LowCore & 0x000000FF);
+    IDS_HDT_CONSOLE (MEM_FLOW, "\tLaunch core %d of socket %d\n", LowCore, Socket);
+    TrainInfo[Die].Training = FALSE;
+  }
+  //
+  // Start Training on Each remote die.
+  //
+  for (Die = 0; Die < mmPtr->DieCount; Die ++ ) {
+    if (Die != BSP_DIE) {
+      NBPtr[Die].BeforeDqsTraining (&(mmPtr->NBPtr[Die]));
+      if (NBPtr[Die].MCTPtr->NodeMemSize != 0) {
+        if (!NBPtr[Die].FeatPtr->Training (&(mmPtr->NBPtr[Die]))) {
+          // Fail to launch code on AP
+          PutEventLog (AGESA_ERROR, MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+          SetMemError (AGESA_ERROR, NBPtr[Die].MCTPtr);
+          if (!MemPtr->ErrorHandling (NBPtr[Die].MCTPtr, EXCLUDE_ALL_DCT, EXCLUDE_ALL_CHIPSEL, &MemPtr->StdHeader)) {
+            ASSERT (FALSE);
+          }
+        } else {
+          TrainInfo[Die].Training = TRUE;
+        }
+      }
+    }
+  }
+  //
+  // Call training on BSP
+  //
+  IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", NBPtr[BSP_DIE].Node);
+  NBPtr[BSP_DIE].BeforeDqsTraining (&(mmPtr->NBPtr[BSP_DIE]));
+  NBPtr[BSP_DIE].TrainingFlow (&(mmPtr->NBPtr[BSP_DIE]));
+  NBPtr[BSP_DIE].AfterDqsTraining (&(mmPtr->NBPtr[BSP_DIE]));
+
+  //
+  // Get Results from remote processors training
+  //
+  do {
+    StillTraining = FALSE;
+    for (Die = 0; Die < mmPtr->DieCount; Die ++ ) {
+      //
+      // For each Die that is training, read the status
+      //
+      if (TrainInfo[Die].Training == TRUE) {
+        GetLocalApicIdForCore (TrainInfo[Die].Socket, TrainInfo[Die].Core, &TargetApicId, StdHeader);
+        ApSts = ApUtilReadRemoteControlByte (TargetApicId, StdHeader);
+        if ((ApSts & 0x80) == 0) {
+          //
+          // Allocate buffer for received data
+          //
+          AllocHeapParams.RequestedBufferSize = (
+            sizeof (DIE_STRUCT) +
+            NBPtr[Die].DctCount * (
+              sizeof (DCT_STRUCT) + (
+                NBPtr[Die].ChannelCount * (
+                  sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK) + (
+                   (NBPtr[Die].MCTPtr->DctData[0].ChData[0].RowCount *
+                    NBPtr[Die].MCTPtr->DctData[0].ChData[0].ColumnCount *
+                    NUMBER_OF_DELAY_TABLES) +
+                    (MAX_BYTELANES_PER_CHANNEL * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) +
+                    (MAX_DIMMS_PER_CHANNEL * MAX_NUMBER_LANES)
+                  )
+                )
+              )
+            )
+          ) + 3;
+          AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, Die, 0, 0);
+          AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+          if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+            //
+            // Receive Training Results
+            //
+
+            ReturnData.DataPtr = AllocHeapParams.BufferPtr;
+            ReturnData.DataSizeInDwords = (UINT16) AllocHeapParams.RequestedBufferSize / 4;
+            ReturnData.DataTransferFlags = 0;
+            Status = ApUtilReceiveBuffer (TrainInfo[Die].Socket, TrainInfo[Die].Core, &ReturnData, StdHeader);
+            if (Status != AGESA_SUCCESS) {
+              SetMemError (Status, NBPtr[Die].MCTPtr);
+            }
+
+            BufferPtr = AllocHeapParams.BufferPtr;
+            LibAmdMemCopy (NBPtr[Die].MCTPtr, BufferPtr, sizeof (DIE_STRUCT), StdHeader);
+            BufferPtr += sizeof (DIE_STRUCT);
+            LibAmdMemCopy ( NBPtr[Die].MCTPtr->DctData,
+                            BufferPtr,
+                            NBPtr[Die].DctCount * (sizeof (DCT_STRUCT) + NBPtr[Die].ChannelCount * sizeof (CH_DEF_STRUCT)),
+                            StdHeader);
+            BufferPtr += NBPtr[Die].DctCount * (sizeof (DCT_STRUCT) + NBPtr[Die].ChannelCount * sizeof (CH_DEF_STRUCT));
+            LibAmdMemCopy ( NBPtr[Die].PSBlock,
+                            BufferPtr,
+                            NBPtr[Die].DctCount * NBPtr[Die].ChannelCount * sizeof (MEM_PS_BLOCK),
+                            StdHeader);
+            BufferPtr += NBPtr[Die].DctCount * NBPtr[Die].ChannelCount * sizeof (MEM_PS_BLOCK);
+            LibAmdMemCopy ( NBPtr[Die].MCTPtr->DctData[0].ChData[0].RcvEnDlys,
+                            BufferPtr,
+                            (NBPtr[Die].DctCount * NBPtr[Die].ChannelCount) *
+                            ((NBPtr[Die].MCTPtr->DctData[0].ChData[0].RowCount *
+                              NBPtr[Die].MCTPtr->DctData[0].ChData[0].ColumnCount *
+                              NUMBER_OF_DELAY_TABLES) +
+                              (MAX_BYTELANES_PER_CHANNEL * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) +
+                              (MAX_DIMMS_PER_CHANNEL * MAX_NUMBER_LANES)
+                            ),
+                            StdHeader);
+
+            HeapDeallocateBuffer (AllocHeapParams.BufferHandle, StdHeader);
+
+            NBPtr[Die].AfterDqsTraining (&(mmPtr->NBPtr[Die]));
+            TrainInfo[Die].Training = FALSE;
+          } else {
+            PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA, NBPtr[Die].Node, 0, 0, 0, StdHeader);
+            SetMemError (AGESA_FATAL, NBPtr[Die].MCTPtr);
+            ASSERT(FALSE); // Insufficient Heap Space allocation for parallel training buffer
+          }
+        } else if (ApSts == CORE_IDLE) {
+          // AP does not have buffer to transmit to BSP
+          // AP fails to locate a buffer for data transfer
+          TrainInfo[Die].Training = FALSE;
+        } else {
+          // Signal to loop through again
+          StillTraining = TRUE;
+        }
+      }
+    }
+    // Wait for 1 us
+    MemUWait10ns (100, NBPtr->MemPtr);
+    Time ++;
+  } while ((StillTraining) && ((Time < TimeOut) || !TimeoutEn)); // Continue until all Dies are finished
+                                                // if cannot finish in 1 s, do fatal exit
+
+  if (StillTraining && TimeoutEn) {
+    // Parallel training time out, do fatal exit, as there is at least one AP hangs.
+    PutEventLog (AGESA_FATAL, MEM_ERROR_PARALLEL_TRAINING_TIME_OUT, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_FATAL, NBPtr[BSP_DIE].MCTPtr);
+    ASSERT(FALSE); // Timeout occurred while still training
+  }
+
+  for (Die = 0; Die < mmPtr->DieCount; Die ++ ) {
+    if (NBPtr[Die].MCTPtr->ErrCode == AGESA_FATAL) {
+      return FALSE;
+    }
+  }
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmStandardTraining.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmStandardTraining.c
new file mode 100644
index 0000000000..b126dda809
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmStandardTraining.c
@@ -0,0 +1,241 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmStandardTraining.c
+ *
+ * Main Memory Feature implementation file for Standard Training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "ma.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMSTANDARDTRAINING_FILECODE
+/* features */
+#include "mftds.h"
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemMStandardTraining (
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmPtr
+  );
+
+BOOLEAN
+MemMStandardTrainingUsingAdjacentDies (
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmPtr
+  );
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+extern MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR3[];
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * MemMStandardTraining
+ *
+ * This function implements standard memory training whereby training functions
+ * for all nodes are run by the BSP.
+ *
+ *
+ *     @param[in,out]   *mmPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMStandardTraining (
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmPtr
+  )
+{
+  UINT8 Die;
+  //
+  // Run Northbridge-specific Standard Training feature for each die.
+  //
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart serial training\n");
+  for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Die);
+    AGESA_TESTPOINT (TpProcMemBeforeAnyTraining, &(mmPtr->MemPtr->StdHeader));
+    mmPtr->NBPtr[Die].BeforeDqsTraining (&mmPtr->NBPtr[Die]);
+    mmPtr->NBPtr[Die].Execute1dMaxRdLatTraining = TRUE;
+    mmPtr->NBPtr[Die].FeatPtr->Training (&mmPtr->NBPtr[Die]);
+    mmPtr->NBPtr[Die].TechPtr->TechnologySpecificHook[LrdimmSyncTrainedDlys] (mmPtr->NBPtr[Die].TechPtr, NULL);
+    mmPtr->NBPtr[Die].AfterDqsTraining (&mmPtr->NBPtr[Die]);
+    if (mmPtr->NBPtr[Die].MCTPtr->ErrCode == AGESA_FATAL) {
+      break;
+    }
+  }
+  return (BOOLEAN) (Die == mmPtr->DieCount);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * MemMStandardTrainingUsingAdjacentDies
+ *
+ * This function implements standard memory training whereby training functions
+ * for all nodes are run by the BSP while enabling other dies to eable argressor channel
+ *
+ *
+ *     @param[in,out]   *mmPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMStandardTrainingUsingAdjacentDies (
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmPtr
+  )
+{
+  UINT8 Die;
+  UINT8 AdjacentDie;
+  UINT32 AdjacentSocketNum;
+  UINT32 TargetSocketNum;
+  UINT32 ModuleNum;
+  UINT8 i;
+  UINT8 Dct;
+  UINT8 ChipSel;
+  BOOLEAN FirstCsFound;
+  //
+  // Run Northbridge-specific Standard Training feature for each die.
+  //
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart standard serial training\n");
+  for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Die);
+    AGESA_TESTPOINT (TpProcMemBeforeAnyTraining, &(mmPtr->MemPtr->StdHeader));
+    mmPtr->NBPtr[Die].BeforeDqsTraining (&mmPtr->NBPtr[Die]);
+    mmPtr->NBPtr[Die].Execute1dMaxRdLatTraining = FALSE;
+    mmPtr->NBPtr[Die].FeatPtr->Training (&mmPtr->NBPtr[Die]);
+    if (mmPtr->NBPtr[Die].MCTPtr->ErrCode == AGESA_FATAL) {
+      break;
+    }
+  }
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart training with agressors\n");
+  for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Die);
+    AGESA_TESTPOINT (TpProcMemBeforeAnyTraining, &(mmPtr->MemPtr->StdHeader));
+    GetSocketModuleOfNode (Die, &TargetSocketNum, &ModuleNum, &(mmPtr->MemPtr->StdHeader));
+    for (AdjacentDie = 0; AdjacentDie < mmPtr->DieCount; AdjacentDie++) {
+      mmPtr->NBPtr[Die].DieEnabled[AdjacentDie] = FALSE;
+      GetSocketModuleOfNode (AdjacentDie, &AdjacentSocketNum, &ModuleNum, &(mmPtr->MemPtr->StdHeader));
+      if (TargetSocketNum == AdjacentSocketNum) {
+        if (AdjacentDie != Die) {
+          if (mmPtr->NBPtr[AdjacentDie].MCTPtr->NodeMemSize != 0) {
+            mmPtr->NBPtr[Die].AdjacentDieNBPtr = &mmPtr->NBPtr[AdjacentDie];
+            mmPtr->NBPtr[Die].DieEnabled[AdjacentDie] = TRUE;
+          }
+        } else {
+          if (mmPtr->NBPtr[Die].MCTPtr->NodeMemSize != 0) {
+            mmPtr->NBPtr[Die].DieEnabled[Die] = TRUE;
+          }
+        }
+        // Determine the initial target CS, Max Dimms and max CS number for all DCTs (potential aggressors)
+        if (mmPtr->NBPtr[AdjacentDie].MCTPtr->NodeMemSize != 0) {
+          for (Dct = 0; Dct < mmPtr->NBPtr[AdjacentDie].DctCount; Dct++) {
+            FirstCsFound = FALSE;
+            mmPtr->NBPtr[AdjacentDie].SwitchDCT (&mmPtr->NBPtr[AdjacentDie], Dct);
+            for (ChipSel = 0; ChipSel < mmPtr->NBPtr[AdjacentDie].CSPerChannel (&mmPtr->NBPtr[AdjacentDie]); ChipSel = ChipSel + mmPtr->NBPtr[AdjacentDie].CSPerDelay (&mmPtr->NBPtr[AdjacentDie]) ) {
+              if ((mmPtr->NBPtr[AdjacentDie].DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) != 0) {
+                if (FirstCsFound == FALSE) {
+                  // Set Initial CS value for Current Aggressor CS
+                  mmPtr->NBPtr[AdjacentDie].InitialAggressorCSTarget[Dct] = ChipSel;
+                  mmPtr->NBPtr[AdjacentDie].CurrentAggressorCSTarget[Dct] = mmPtr->NBPtr[AdjacentDie].InitialAggressorCSTarget[Dct];
+                  FirstCsFound = TRUE;
+                }
+                mmPtr->NBPtr[AdjacentDie].MaxAggressorCSEnabled[Dct] = ChipSel;
+                mmPtr->NBPtr[AdjacentDie].MaxAggressorDimms[Dct]++;
+              }
+            }
+          }
+        }
+      }
+    }
+    if (mmPtr->NBPtr[Die].MCTPtr->NodeMemSize != 0) {
+      //Execute Technology specific training features
+      i = 0;
+      while (memTrainSequenceDDR3[i].TrainingSequenceEnabled != 0) {
+        if (memTrainSequenceDDR3[i].TrainingSequenceEnabled (&mmPtr->NBPtr[Die])) {
+          mmPtr->NBPtr[Die].TrainingSequenceIndex = i;
+          // Execute RdDqs Training
+          memTrainSequenceDDR3[i].MemTechFeatBlock->RdDqs__Training (mmPtr->NBPtr[Die].TechPtr);
+          // Execute MaxRdLat Training After training
+          do {
+            if (memTrainSequenceDDR3[i].MemTechFeatBlock->MaxRdLatencyTraining (mmPtr->NBPtr[Die].TechPtr)) {
+              MemFInitTableDrive (&mmPtr->NBPtr[Die], MTAfterMaxRdLatTrn);
+            }
+          } while (mmPtr->NBPtr->ChangeNbFrequency (&mmPtr->NBPtr[Die]));
+          break;
+        }
+        i++;
+      }
+    }
+    mmPtr->NBPtr[Die].TechPtr->TechnologySpecificHook[LrdimmSyncTrainedDlys] (mmPtr->NBPtr[Die].TechPtr, NULL);
+    mmPtr->NBPtr[Die].AfterDqsTraining (&mmPtr->NBPtr[Die]);
+    if (mmPtr->NBPtr[Die].MCTPtr->ErrCode == AGESA_FATAL) {
+      break;
+    }
+  }
+  return (BOOLEAN) (Die == mmPtr->DieCount);
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmUmaAlloc.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmUmaAlloc.c
new file mode 100644
index 0000000000..16f59ae385
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmUmaAlloc.c
@@ -0,0 +1,246 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmUmaAlloc.c
+ *
+ * Main Memory Feature implementation file for UMA allocation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "mport.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMUMAALLOC_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMUmaAlloc (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  );
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *    UMA allocation mechanism.
+ *
+ *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+BOOLEAN
+MemMUmaAlloc (
+  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
+  )
+{
+  UINT32 TOM;
+  UINT32 TOM2;
+  UINT32 UmaSize;
+  UINT32 TopOfChIntlv;
+  UINT32 DctSelHi;
+  UINT32 UmaAlignment;
+  UINT32 UmaAbove4GBase;
+  UINT32 UmaBelow4GBase;
+  BOOLEAN DctSelIntLvEn;
+  BOOLEAN UmaAbove4GEn;
+  S_UINT64 SMsr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  UMA_INFO *UmaInfoPtr;
+
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+
+  MemPtr = MemMainPtr->MemPtr;
+  NBPtr = &(MemMainPtr->NBPtr[BSP_DIE]);
+  RefPtr = NBPtr->RefPtr;
+
+  TOM2 = 0;
+  SMsr.lo = SMsr.hi = 0;
+  UmaAbove4GBase = 0;
+  RefPtr->UmaBase = 0;
+  UmaAlignment = (UINT32) UserOptions.CfgUmaAlignment;
+  UmaAbove4GEn = UserOptions.CfgUmaAbove4G;
+  DctSelIntLvEn = (NBPtr->GetBitField (NBPtr, BFDctSelIntLvEn) == 1) ? TRUE : FALSE;
+  TopOfChIntlv = NBPtr->GetBitField (NBPtr, BFDctSelBaseAddr) << (27 - 16);
+  DctSelHi = NBPtr->GetBitField (NBPtr, BFDctSelHi);
+
+  // Allocate heap for UMA_INFO
+  AllocHeapParams.RequestedBufferSize = sizeof (UMA_INFO);
+  AllocHeapParams.BufferHandle = AMD_UMA_INFO_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader)) {
+    ASSERT(FALSE); // Could not allocate heap for Uma information.
+    return FALSE;
+  }
+  UmaInfoPtr = (UMA_INFO *) AllocHeapParams.BufferPtr;
+  // Default all the fields of UMA_INFO
+  UmaInfoPtr->UmaMode = (UINT8) UMA_NONE;
+  UmaInfoPtr->UmaSize = 0;
+  UmaInfoPtr->UmaBase = 0;
+  UmaInfoPtr->UmaAttributes = 0;
+  UmaInfoPtr->MemClock = NBPtr->DCTPtr->Timings.TargetSpeed;
+
+  switch (RefPtr->UmaMode) {
+  case UMA_NONE:
+    UmaSize = 0;
+    break;
+  case UMA_SPECIFIED:
+    UmaSize = RefPtr->UmaSize;
+    break;
+  case UMA_AUTO:
+    UmaSize = NBPtr->GetUmaSize (NBPtr);
+    break;
+  default:
+    UmaSize = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  if (UmaSize != 0) {
+    //TOM scaled from [47:0] to [47:16]
+    LibAmdMsrRead (TOP_MEM, (UINT64 *)&SMsr, &(NBPtr->MemPtr->StdHeader));
+    TOM = (SMsr.lo >> 16) | (SMsr.hi << (32 - 16));
+
+    UmaBelow4GBase = (TOM - UmaSize) & UmaAlignment;
+    // Initialize Ref->UmaBase to UmaBelow4GBase
+    RefPtr->UmaBase = UmaBelow4GBase;
+
+    // Uma Above 4G support
+    if (UmaAbove4GEn) {
+      //TOM2 scaled from [47:0] to [47:16]
+      LibAmdMsrRead (TOP_MEM2, (UINT64 *)&SMsr, &(NBPtr->MemPtr->StdHeader));
+      TOM2 = (SMsr.lo >> 16) | (SMsr.hi << (32 - 16));
+      if (TOM2 != 0) {
+        UmaAbove4GBase = (TOM2 - UmaSize) & UmaAlignment;
+        //Set UmaAbove4GBase to 0 if UmaAbove4GBase is below 4GB
+        if (UmaAbove4GBase < _4GB_RJ16) {
+          UmaAbove4GBase = 0;
+        }
+        if (UmaAbove4GBase != 0) {
+          RefPtr->UmaBase = UmaAbove4GBase;
+          // 1. TopOfChIntlv == 0 indicates that whole DCT0 and DCT1 memory are interleaved.
+          // 2. TopOfChIntlv >= TOM tells us :
+          //   -All or portion of Uma region that above 4G is NOT interleaved.
+          //   -Whole Uma region that below 4G is interleaved.
+          if (DctSelIntLvEn && (TopOfChIntlv >= TOM)) {
+            RefPtr->UmaBase = UmaBelow4GBase;
+          }
+        }
+      }
+    }
+
+    UmaInfoPtr->UmaMode = (UINT8) (RefPtr->UmaMode);
+    UmaInfoPtr->UmaBase = (UINT64) ((UINT64) RefPtr->UmaBase << 16);
+
+    if (RefPtr->UmaBase >= _4GB_RJ16) {
+      // UmaSize might be extended if it is 128MB or 256MB .. aligned, so update it.
+      RefPtr->UmaSize = TOM2 - UmaAbove4GBase;
+      // Uma Typing
+      MemNSetMTRRUmaRegionUCNb (NBPtr, &UmaAbove4GBase, &TOM2);
+      if (DctSelIntLvEn && (TopOfChIntlv == 0)) {
+        UmaInfoPtr->UmaAttributes = UMA_ATTRIBUTE_INTERLEAVE | UMA_ATTRIBUTE_ON_DCT0 | UMA_ATTRIBUTE_ON_DCT1;
+      } else {
+        // Entire UMA region is in the high DCT
+        UmaInfoPtr->UmaAttributes = (DctSelHi == 0) ? UMA_ATTRIBUTE_ON_DCT0 : UMA_ATTRIBUTE_ON_DCT1;
+      }
+    } else {
+      // UmaSize might be extended if it is 128MB or 256MB .. aligned, so update it.
+      RefPtr->UmaSize = TOM - UmaBelow4GBase;
+      // Uma Typing
+      NBPtr->UMAMemTyping (NBPtr);
+      if (DctSelIntLvEn && ((TopOfChIntlv == 0) || (TopOfChIntlv >= TOM))) {
+        UmaInfoPtr->UmaAttributes = UMA_ATTRIBUTE_INTERLEAVE | UMA_ATTRIBUTE_ON_DCT0 | UMA_ATTRIBUTE_ON_DCT1;
+      } else {
+        if (UmaBelow4GBase >= TopOfChIntlv) {
+          // Entire UMA region is in the high DCT
+          UmaInfoPtr->UmaAttributes = (DctSelHi == 0) ? UMA_ATTRIBUTE_ON_DCT0 : UMA_ATTRIBUTE_ON_DCT1;
+        } else if (TopOfChIntlv >= TOM) {
+          // Entire UMA region is in the low DCT
+          UmaInfoPtr->UmaAttributes = (DctSelHi == 1) ? UMA_ATTRIBUTE_ON_DCT0 : UMA_ATTRIBUTE_ON_DCT1;
+        } else {
+          // UMA region is in both DCT0 and DCT1
+          UmaInfoPtr->UmaAttributes = UMA_ATTRIBUTE_ON_DCT0 | UMA_ATTRIBUTE_ON_DCT1;
+        }
+      }
+    }
+    UmaInfoPtr->UmaSize = (RefPtr->UmaSize) << 16;
+    IDS_HDT_CONSOLE (MEM_FLOW, "UMA is allocated:\n\tBase: %x0000\n\tSize: %x0000\n", RefPtr->UmaBase, RefPtr->UmaSize);
+  }
+
+  return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmflow.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmflow.c
new file mode 100644
index 0000000000..3129450e6e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mmflow.c
@@ -0,0 +1,395 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmflow.c
+ *
+ * Main Memory Flow Entrypoint file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "AdvancedApi.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMFLOW_FILECODE
+/* features */
+
+extern MEM_NB_SUPPORT memNBInstalled[];
+extern MEM_TECH_CONSTRUCTOR* memTechInstalled[];
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+extern MEM_FLOW_CFG* memFlowControlInstalled[];
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemSPDDataProcess (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function is the main memory configuration function for DR DDR3
+ *
+ *      Requirements:
+ *
+ *      Run-Time Requirements:
+ *      1. Complete Hypertransport Bus Configuration
+ *      2. AmdMemInitDataStructDef must be run to set default values
+ *      3. MSR bit to allow access to high PCI regs set on all nodes
+ *      4. BSP in Big Real Mode
+ *      5. Stack available
+ *      6. MCG_CTL=-1, MC4_EN=0 for all CPUs
+ *      7. MCi_STS from shutdown/warm reset recorded (if desired) prior to entry
+ *      8. All var MTRRs reset to zero
+ *      9. State of NB_CFG.DisDatMsk set properly on all CPUs
+ *
+ *     @param[in,out]   *MemPtr   - Pointer to the MEM_DATA_STRUCT
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+AGESA_STATUS
+AmdMemAuto (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  MEM_SHARED_DATA  mmSharedData;
+  MEM_MAIN_DATA_BLOCK mmData;
+  MEM_NB_BLOCK *NBPtr;
+  MEM_TECH_BLOCK *TechPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  AGESA_STATUS Retval;
+  UINT8 i;
+  UINT8 Die;
+  UINT8 DieCount;
+  UINT8 Tab;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  ASSERT (MemPtr != NULL);
+
+  AGESA_TESTPOINT (TpProcMemAmdMemAuto, &MemPtr->StdHeader);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "MEM PARAMS:\n");
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tBottomIo : %04x\n", MemPtr->ParameterListPtr->BottomIo);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tMemHoleRemap : %d\n", MemPtr->ParameterListPtr->MemHoleRemapping);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tLimitBelow1TB : %d\n", MemPtr->ParameterListPtr->LimitMemoryToBelow1Tb);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tUserTimingMode : %d\n", MemPtr->ParameterListPtr->UserTimingMode);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClockValue : %d\n", MemPtr->ParameterListPtr->MemClockValue);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tBankIntlv : %d\n", MemPtr->ParameterListPtr->EnableBankIntlv);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tNodeIntlv : %d\n", MemPtr->ParameterListPtr->EnableNodeIntlv);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tChannelIntlv : %d\n", MemPtr->ParameterListPtr->EnableChannelIntlv);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tEccFeature : %d\n", MemPtr->ParameterListPtr->EnableEccFeature);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tPowerDown : %d\n", MemPtr->ParameterListPtr->EnablePowerDown);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tOnLineSpare : %d\n", MemPtr->ParameterListPtr->EnableOnLineSpareCtl);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tParity : %d\n", MemPtr->ParameterListPtr->EnableParity);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tBankSwizzle : %d\n", MemPtr->ParameterListPtr->EnableBankSwizzle);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClr : %d\n", MemPtr->ParameterListPtr->EnableMemClr);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tUmaMode : %d\n", MemPtr->ParameterListPtr->UmaMode);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tUmaSize : %d\n", MemPtr->ParameterListPtr->UmaSize);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tMemRestoreCtl : %d\n", MemPtr->ParameterListPtr->MemRestoreCtl);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tSaveMemContextCtl : %d\n", MemPtr->ParameterListPtr->SaveMemContextCtl);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tExternalVrefCtl : %d\n", MemPtr->ParameterListPtr->ExternalVrefCtl );
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tForceTrainMode : %d\n\n", MemPtr->ParameterListPtr->ForceTrainMode );
+
+  //----------------------------------------------------------------------------
+  // Get TSC rate, which will be used later in Wait10ns routine
+  //----------------------------------------------------------------------------
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &MemPtr->StdHeader);
+  FamilySpecificServices->GetTscRate (FamilySpecificServices, &MemPtr->TscRate, &MemPtr->StdHeader);
+
+  //----------------------------------------------------------------------------
+  // Read In SPD Data
+  //----------------------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemBeforeSpdProcessing, &MemPtr->StdHeader);
+  MemSPDDataProcess (MemPtr);
+
+  //----------------------------------------------------------------
+  // Initialize Main Data Block
+  //----------------------------------------------------------------
+  mmData.MemPtr = MemPtr;
+  mmData.mmSharedPtr = &mmSharedData;
+  LibAmdMemFill (&mmSharedData, 0, sizeof (mmSharedData), &MemPtr->StdHeader);
+  mmSharedData.DimmExcludeFlag = NORMAL;
+  mmSharedData.NodeIntlv.IsValid = FALSE;
+  //----------------------------------------------------------------
+  // Discover populated CPUs
+  //
+  //----------------------------------------------------------------
+  Retval = MemSocketScan (&mmData);
+  if (Retval == AGESA_FATAL) {
+    return Retval;
+  }
+  DieCount = mmData.DieCount;
+  //----------------------------------------------------------------
+  //
+  // Allocate Memory for NB and Tech Blocks
+  //
+  //  NBPtr[Die]----+
+  //                |
+  //                V
+  //  +---+---+---+---+---+---+---+---+
+  //  | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |   NB Blocks
+  //  +---+---+---+---+---+---+---+---+
+  //    |   |   |   |   |   |   |   |
+  //    |   |   |   |   |   |   |   |
+  //    v   v   v   v   v   v   v   v
+  //  +---+---+---+---+---+---+---+---+
+  //  | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |   Tech Blocks
+  //  +---+---+---+---+---+---+---+---+
+  //
+  //
+  //----------------------------------------------------------------
+  AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (MEM_NB_BLOCK) + sizeof (MEM_TECH_BLOCK)));
+  AllocHeapParams.BufferHandle = AMD_MEM_AUTO_HANDLE;
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader)) {
+    ASSERT(FALSE); // NB and Tech Block Heap allocate error
+    return AGESA_FATAL;
+  }
+  NBPtr = (MEM_NB_BLOCK *)AllocHeapParams.BufferPtr;
+  TechPtr = (MEM_TECH_BLOCK *) (&NBPtr[DieCount]);
+  mmData.NBPtr = NBPtr;
+  mmData.TechPtr = TechPtr;
+
+  //----------------------------------------------------------------
+  // Create NB Blocks
+  //
+  //----------------------------------------------------------------
+  for (Die = 0 ; Die < DieCount ; Die++ ) {
+    i = 0;
+    while (memNBInstalled[i].MemConstructNBBlock != 0) {
+      if (memNBInstalled[i].MemConstructNBBlock (&NBPtr[Die], MemPtr, memNBInstalled[i].MemFeatBlock, &mmSharedData, Die) == TRUE) {
+        break;
+      }
+      i++;
+    }
+    // Couldn't find a NB which supported this family
+    if (memNBInstalled[i].MemConstructNBBlock == 0) {
+      return AGESA_FATAL;
+    }
+  }
+  //----------------------------------------------------------------
+  // Create Technology Blocks
+  //
+  //----------------------------------------------------------------
+  for (Die = 0 ; Die < DieCount ; Die++ ) {
+    i = 0;
+    while (memTechInstalled[i] != NULL) {
+      if (memTechInstalled[i] (&TechPtr[Die], &NBPtr[Die])) {
+        NBPtr[Die].TechPtr = &TechPtr[Die];
+        break;
+      }
+      i++;
+    }
+    // Couldn't find a Tech block which supported this family
+    if (memTechInstalled[i] == NULL) {
+      return AGESA_FATAL;
+    }
+  }
+  //----------------------------------------------------------------
+  //
+  //                 MEMORY INITIALIZATION TASKS
+  //
+  //----------------------------------------------------------------
+  i = 0;
+  while (memFlowControlInstalled[i] != NULL) {
+    Retval = memFlowControlInstalled[i] (&mmData);
+    if (MemPtr->IsFlowControlSupported == TRUE) {
+      break;
+    }
+    i++;
+  }
+
+  //----------------------------------------------------------------
+  // Deallocate NB register tables
+  //----------------------------------------------------------------
+  for (Tab = 0; Tab < NumberOfNbRegTables; Tab++) {
+    HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_NB_REG_TABLE, Tab, 0, 0), &MemPtr->StdHeader);
+  }
+
+  //----------------------------------------------------------------
+  // Check for errors and return
+  //----------------------------------------------------------------
+  AGESA_TESTPOINT (TpProcMemEnd, &MemPtr->StdHeader);
+  for (Die = 0; Die < DieCount; Die++) {
+    if (NBPtr[Die].MCTPtr->ErrCode > Retval) {
+      Retval = NBPtr[Die].MCTPtr->ErrCode;
+    }
+  }
+  return Retval;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *  This function fills a default SPD buffer with SPD values for all DIMMs installed in the system
+ *
+ *    The SPD Buffer is populated with a Socket-Channel-Dimm centric view of the Dimms.  At this
+ *  point, the Memory controller type is not known, and the platform BIOS does not know the anything
+ *  about which DIMM is on which DCT.  So the DCT relationship is abstracted from the arrangement
+ *  of SPD information here.  We use the utility functions GetSpdSocketIndex(), GetMaxChannelsPerSocket(),
+ *  and GetMaxDimmsPerChannel() to Map the SPD data according to which Socket-relative channel the DIMMs
+ *  are connected to.  The functions rely on either the maximum values in the
+ *  PlatformSpecificOverridingTable or if unspecified, the absolute maximums in AGESA.H.
+ *
+ *  This mapping is translated in the Northbridge object Constructor and the Technology block constructor.
+ *
+ *     @param[in,out]   *MemPtr   - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+
+VOID
+STATIC
+MemSPDDataProcess (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT8 Socket;
+  UINT8 Channel;
+  UINT8 Dimm;
+  UINT8 DimmIndex;
+  UINT32 AgesaStatus;
+  UINT8 MaxSockets;
+  UINT8 MaxChannelsPerSocket;
+  UINT8 MaxDimmsPerChannel;
+  SPD_DEF_STRUCT *DimmSPDPtr;
+  PSO_TABLE *PsoTable;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  AGESA_READ_SPD_PARAMS SpdParam;
+
+  ASSERT (MemPtr != NULL);
+  MaxSockets = (UINT8) (0x000000FF & GetPlatformNumberOfSockets ());
+  PsoTable = MemPtr->ParameterListPtr->PlatformMemoryConfiguration;
+  //
+  // Allocate heap for the table
+  //
+  AllocHeapParams.RequestedBufferSize = (GetSpdSocketIndex (PsoTable, MaxSockets, &MemPtr->StdHeader) * sizeof (SPD_DEF_STRUCT));
+  AllocHeapParams.BufferHandle = AMD_MEM_SPD_HANDLE;
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) == AGESA_SUCCESS) {
+    MemPtr->SpdDataStructure = (SPD_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    //
+    // Initialize SpdParam Structure
+    //
+    LibAmdMemCopy ((VOID *)&SpdParam, (VOID *)MemPtr, (UINTN)sizeof (SpdParam.StdHeader), &MemPtr->StdHeader);
+    //
+    // Populate SPDDataBuffer
+    //
+    SpdParam.MemData = MemPtr;
+    DimmIndex = 0;
+    for (Socket = 0; Socket < (UINT16)MaxSockets; Socket++) {
+      MaxChannelsPerSocket = GetMaxChannelsPerSocket (PsoTable, Socket, &MemPtr->StdHeader);
+      SpdParam.SocketId = Socket;
+      for (Channel = 0; Channel < MaxChannelsPerSocket; Channel++) {
+        SpdParam.MemChannelId = Channel;
+        MaxDimmsPerChannel = GetMaxDimmsPerChannel (PsoTable, Socket, Channel);
+        for (Dimm = 0; Dimm < MaxDimmsPerChannel; Dimm++) {
+          SpdParam.DimmId = Dimm;
+          DimmSPDPtr = &(MemPtr->SpdDataStructure[DimmIndex++]);
+          SpdParam.Buffer = DimmSPDPtr->Data;
+          AGESA_TESTPOINT (TpProcMemBeforeAgesaReadSpd, &MemPtr->StdHeader);
+          AgesaStatus = AgesaReadSpd (0, &SpdParam);
+          AGESA_TESTPOINT (TpProcMemAfterAgesaReadSpd, &MemPtr->StdHeader);
+          if (AgesaStatus == AGESA_SUCCESS) {
+            DimmSPDPtr->DimmPresent = TRUE;
+            IDS_HDT_CONSOLE (MEM_FLOW, "SPD Socket %d Channel %d Dimm %d: %08x\n", Socket, Channel, Dimm, SpdParam.Buffer);
+          } else {
+            DimmSPDPtr->DimmPresent = FALSE;
+          }
+        }
+      }
+    }
+  } else {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_SPD, 0, 0, 0, 0, &MemPtr->StdHeader);
+    //
+    // Assert here if unable to allocate heap for SPDs
+    //
+    IDS_ERROR_TRAP;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mu.asm b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mu.asm
new file mode 100644
index 0000000000..61656df3e7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mu.asm
@@ -0,0 +1,497 @@
+;*****************************************************************************
+; AMD Generic Encapsulated Software Architecture
+;
+;  $Workfile:: mu.asm   $ $Revision:: 443#$  $Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+; Description: Main memory controller system configuration for AGESA
+;
+;
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+;============================================================================
+
+
+    .XLIST
+    .LIST
+
+    .686p
+    .MODEL FLAT
+    .CODE
+    ASSUME FS: NOTHING
+
+; Define the calling convention used for the C library modules
+;@attention - This should be in a central include file
+CALLCONV    EQU     NEAR C
+
+
+;===============================================================================
+;memUOutPort:
+;
+; Do a 32 Bit IO Out operation using edx.
+; NOTE: This function will be obsolete in the future.
+;
+;             In: Port  - port number
+;                 Value - value to be written
+;
+;            Out:
+;
+; All registers preserved.
+;===============================================================================
+MemUOutPort PROC CALLCONV PUBLIC Port:DWORD, Value:DWORD
+    pushad
+    mov edx,Port
+    mov eax,Value
+    out dx,al
+    popad
+    ret
+MemUOutPort ENDP
+
+
+;----------------------------------------------------------------------------
+; _SFENCE();
+;
+_SFENCE macro
+    db  0Fh,0AEh,0F8h
+    endm
+
+;----------------------------------------------------------------------------
+; _MFENCE();
+;
+_MFENCE macro
+    db  0Fh,0AEh,0F0h
+    endm
+
+;----------------------------------------------------------------------------
+; _EXECFENCE();
+;
+_EXECFENCE macro
+    out 0EDh,al             ;prevent speculative execution of following instructions
+    endm
+
+;===============================================================================
+;MemUWriteCachelines:
+;   Write a test pattern to DRAM
+;
+;             In: Pattern   - pointer to the write pattern
+;                 Address   - Physical address to be read
+;                 ClCount   - number of cachelines to be read
+;            Out:
+;
+;All registers preserved.
+;===============================================================================
+MemUWriteCachelines PROC CALLCONV PUBLIC Address:DWORD, Pattern:NEAR PTR DWORD, ClCount:WORD
+        pushad
+        push ds
+
+        mov eax,Address
+        push ss
+        pop ds
+        xor edx,edx
+        mov edx, DWORD PTR Pattern
+        mov esi,edx
+        mov edx,16
+        _EXECFENCE
+        xor ecx, ecx
+        mov cx,ClCount
+        shl ecx,2
+        @@:
+        db 66h, 0Fh,6Fh,06           ;MOVDQA xmm0,[esi]
+        db 64h, 66h, 0Fh,0E7h,00      ;MOVNTDQ fs:[eax],xmm0  (xmm0 is 128 bits)
+        add eax,edx
+        add esi,edx
+        loop @B
+
+        pop ds
+        popad
+        ret
+MemUWriteCachelines ENDP
+
+;===============================================================================
+;MemUReadCachelines:
+;
+; Read a pattern of 72 bit times (per DQ), to test dram functionality.  The
+;pattern is a stress pattern which exercises both ISI and crosstalk.  The number
+;of cache lines to fill is dependent on DCT width mode and burstlength.
+;
+;             In: Buffer    - pointer to a buffer where read data will be stored
+;                 Address   - Physical address to be read
+;                 ClCount   - number of cachelines to be read
+;            Out:
+;
+;All registers preserved.
+;===============================================================================
+MemUReadCachelines PROC CALLCONV PUBLIC Buffer:NEAR PTR DWORD, Address:DWORD, ClCount:WORD
+LOCAL Count:BYTE
+        pushad
+        ; First, issue continuous dummy reads to fill up the cache
+        mov eax,Address
+        .if (ClCount > 18)
+            mov cx,ClCount
+            shr cx,4
+            mov Count,cl
+            .while (Count != 0)
+                push eax
+                mov edi,eax
+                add edi,128                     ;bias value (to account for signed displacement)
+                                                ;clflush opcode=0F AE /7
+                mov esi,edi
+                mov ebx,esi
+                mov ecx,esi
+                mov edx,esi
+                add edi,4*64                    ;TestAddr+4 cache lines
+                add ebx,8*64                    ;TestAddr+8 cache lines
+                add ecx,12*64                   ;TestAddr+12 cache lines
+                add edx,16*64                   ;TestAddr+16 cache lines
+                sub edx,128
+                _EXECFENCE
+                mov eax,fs:[esi-128]            ;TestAddr
+                _MFENCE
+                mov eax,fs:[esi-64]             ;TestAddr+1 cache line
+                _MFENCE
+                mov eax,fs:[esi]                ;TestAddr+2 cache lines
+                _MFENCE
+                mov eax,fs:[esi+64]             ;TestAddr+3 cache lines
+                _MFENCE
+                mov eax,fs:[edi-128]            ;TestAddr+4 cache lines
+                _MFENCE
+                mov eax,fs:[edi-64]             ;TestAddr+5 cache lines
+                _MFENCE
+                mov eax,fs:[edi]                ;TestAddr+6 cache lines
+                _MFENCE
+                mov eax,fs:[edi+64]             ;TestAddr+7 cache lines
+                _MFENCE
+                mov eax,fs:[ebx-128]            ;TestAddr+8 cache lines
+                _MFENCE
+                mov eax,fs:[ebx-64]             ;TestAddr+9 cache lines
+                _MFENCE
+                mov eax,fs:[ebx]                ;TestAddr+10 cache lines
+                _MFENCE
+                mov eax,fs:[ebx+64]             ;TestAddr+11 cache lines
+                _MFENCE
+                mov eax,fs:[ecx-128]            ;TestAddr+12 cache lines
+                _MFENCE
+                mov eax,fs:[ecx-64]             ;TestAddr+13 cache lines
+                _MFENCE
+                mov eax,fs:[ecx]                ;TestAddr+14 cache lines
+                _MFENCE
+                mov eax,fs:[ecx+64]             ;TestAddr+15 cache lines
+                _MFENCE
+                pop eax
+                add eax,(16*64)                 ;Next 16CL
+                dec Count
+            .endw
+        .else
+            mov edi,eax
+            add edi,128                     ;bias value (to account for signed displacement)
+                                            ;clflush opcode=0F AE /7
+            mov esi,edi
+            mov ebx,esi
+            mov ecx,esi
+            mov edx,esi
+            add edi,4*64                    ;TestAddr+4 cache lines
+            add ebx,8*64                    ;TestAddr+8 cache lines
+            add ecx,12*64                   ;TestAddr+12 cache lines
+            add edx,16*64                   ;TestAddr+16 cache lines
+            sub edx,128
+            .if(ClCount == 1)
+                _MFENCE
+                mov eax,fs:[esi-128]            ;TestAddr
+                _MFENCE
+            .elseif(ClCount == 3)
+                _EXECFENCE
+                mov eax,fs:[esi-128]            ;TestAddr
+                _MFENCE
+                mov eax,fs:[esi-64]             ;TestAddr+1 cache line
+                _MFENCE
+                mov eax,fs:[esi]                ;TestAddr+2 cache lines
+                _MFENCE
+            .elseif(ClCount == 6)
+                _EXECFENCE
+                mov eax,fs:[esi-128]            ;TestAddr
+                _MFENCE
+                mov eax,fs:[esi-64]             ;TestAddr+1 cache line
+                _MFENCE
+                mov eax,fs:[esi]                ;TestAddr+2 cache lines
+                _MFENCE
+                mov eax,fs:[esi+64]             ;TestAddr+3 cache lines
+                _MFENCE
+                mov eax,fs:[edi-128]            ;TestAddr+4 cache lines
+                _MFENCE
+                mov eax,fs:[edi-64]             ;TestAddr+5 cache lines
+                _MFENCE
+            .elseif(ClCount == 9)
+                _EXECFENCE
+                mov eax,fs:[esi-128]            ;TestAddr
+                _MFENCE
+                mov eax,fs:[esi-64]             ;TestAddr+1 cache line
+                _MFENCE
+                mov eax,fs:[esi]                ;TestAddr+2 cache lines
+                _MFENCE
+                mov eax,fs:[esi+64]             ;TestAddr+3 cache lines
+                _MFENCE
+                mov eax,fs:[edi-128]            ;TestAddr+4 cache lines
+                _MFENCE
+                mov eax,fs:[edi-64]             ;TestAddr+5 cache lines
+                _MFENCE
+                mov eax,fs:[edi]                ;TestAddr+6 cache lines
+                _MFENCE
+                mov eax,fs:[edi+64]             ;TestAddr+7 cache lines
+                _MFENCE
+                mov eax,fs:[ebx-128]            ;TestAddr+8 cache lines
+                _MFENCE
+            .elseif(ClCount == 18)
+                _EXECFENCE
+                mov eax,fs:[esi-128]            ;TestAddr
+                _MFENCE
+                mov eax,fs:[esi-64]             ;TestAddr+1 cache line
+                _MFENCE
+                mov eax,fs:[esi]                ;TestAddr+2 cache lines
+                _MFENCE
+                mov eax,fs:[esi+64]             ;TestAddr+3 cache lines
+                _MFENCE
+                mov eax,fs:[edi-128]            ;TestAddr+4 cache lines
+                _MFENCE
+                mov eax,fs:[edi-64]             ;TestAddr+5 cache lines
+                _MFENCE
+                mov eax,fs:[edi]                ;TestAddr+6 cache lines
+                _MFENCE
+                mov eax,fs:[edi+64]             ;TestAddr+7 cache lines
+                _MFENCE
+                mov eax,fs:[ebx-128]            ;TestAddr+8 cache lines
+                _MFENCE
+                mov eax,fs:[ebx-64]             ;TestAddr+9 cache lines
+                _MFENCE
+                mov eax,fs:[ebx]                ;TestAddr+10 cache lines
+                _MFENCE
+                mov eax,fs:[ebx+64]             ;TestAddr+11 cache lines
+                _MFENCE
+                mov eax,fs:[ecx-128]            ;TestAddr+12 cache lines
+                _MFENCE
+                mov eax,fs:[ecx-64]             ;TestAddr+13 cache lines
+                _MFENCE
+                mov eax,fs:[ecx]                ;TestAddr+14 cache lines
+                _MFENCE
+                mov eax,fs:[ecx+64]             ;TestAddr+15 cache lines
+                _MFENCE
+                mov eax,fs:[edx]                ;TestAddr+16 cache lines
+                _MFENCE
+                mov eax,fs:[edx+64]             ;TestAddr+17 cache lines
+                _MFENCE
+            .endif
+        .endif
+        _MFENCE
+
+        ; Then, copy data to buffer
+        mov esi,Address
+        xor edx,edx
+        mov edx,DWORD PTR Buffer
+        mov edi,edx
+        xor ecx, ecx
+        mov cx,ClCount
+        shl ecx,6
+        @@:
+        mov al,fs:[esi]
+        mov ss:[edi],al
+        inc esi
+        inc edi
+        loop @B
+
+        popad
+        ret
+MemUReadCachelines ENDP
+
+;===============================================================================
+;MemUDummyCLRead:
+;
+;   Perform a single cache line read from a given physical address.
+;
+;             In: Address   - Physical address to be read
+;                 ClCount   - number of cachelines to be read
+;            Out:
+;
+;All registers preserved.
+;===============================================================================
+MemUDummyCLRead PROC CALLCONV PUBLIC Address:DWORD
+    _SFENCE
+    pushad
+    mov eax,Address
+    mov dl,fs:[eax]
+    popad
+    ret
+MemUDummyCLRead ENDP
+
+;===============================================================================
+;MemUFlushPattern:
+;
+; Flush a pattern of 72 bit times (per DQ) from cache.  This procedure is used
+;to ensure cache miss on the next read training.
+;
+;             In: Address   - Physical address to be flushed
+;                 ClCount   - number of cachelines to be flushed
+;            Out:
+;
+;All registers preserved.
+;===============================================================================
+MemUFlushPattern PROC CALLCONV PUBLIC Address:DWORD, ClCount:WORD
+        pushad
+        mov edi,Address
+        movzx ecx,ClCount
+        @@:
+        _MFENCE                     ; Force strong ordering of clflush
+        db  64h,0Fh,0AEh,3Fh        ; MemUClFlush fs:[edi]
+        _MFENCE
+        add edi,64
+        loop @B
+        popad
+        ret
+MemUFlushPattern ENDP
+
+
+;===============================================================================
+;MemUGetWrLvNblErr:
+;   Read ClCount number of cachelines then return the bitmap that indicates
+;   the write leveling result of each byte lane.
+;
+;   IN:     ErrBitmap - pointer to a DWORD that will be assigned with WL result
+;           Address   - Physical address to be sampled
+;           ClCount   - number of cachelines to be read
+;
+;   OUT:    ErrBitmap - WL result
+;
+;All registers preserved
+;===============================================================================
+MemUGetWrLvNblErr PROC CALLCONV PUBLIC ErrBitmap:NEAR PTR DWORD, Address:DWORD, ClCount:WORD
+LOCAL ZeroCount[32]:WORD
+
+        pushad
+        mov esi,Address
+        _EXECFENCE
+    ;Cache fill
+        movzx ecx,ClCount
+        @@:
+        mov eax,fs:[esi]
+        add esi,64
+        loop @B
+        _MFENCE
+
+    ; Then, count the number of 0's
+        ;push es
+        ;push ss
+        ;pop es
+        lea edi,ZeroCount
+        mov cx,SIZEOF ZeroCount
+        mov al,0
+        rep stosb
+        ;pop es
+
+        mov esi,Address
+        lea edi,ZeroCount
+        mov cx,ClCount
+        shl cx,6
+        .while(cx > 0)
+            mov al,fs:[esi]
+            test al,00Fh        ;check lower nibble
+            .if(ZERO?)
+                inc WORD PTR [edi]
+            .endif
+            add edi,2
+            test al,0F0h        ;check upper nibble
+            .if(ZERO?)
+                inc WORD PTR [edi]
+            .endif
+            add edi,2
+            inc esi
+            dec cx
+            test cx,07h
+            .if(ZERO?)
+                sub edi,(16*2)
+                sub cx,8
+                add esi,8
+            .endif
+        .endw
+
+    ; Then, average and compress data to error bits
+        lea esi,ZeroCount
+        mov dx,ClCount
+        shl dx,1
+        xor eax,eax
+        xor ecx,ecx
+        mov cl,0
+        .while(cl<16)
+            .if(WORD PTR [esi] < dx)
+                bts eax,ecx
+            .endif
+            add esi,2
+            inc cl
+        .endw
+        xor edx,edx
+        mov dx,WORD PTR ErrBitmap
+        mov [edx], ax
+
+        popad
+        ret
+MemUGetWrLvNblErr ENDP
+
+;===============================================================================
+;AlignPointerTo16Byte:
+;   Modifies BufferPtr to be 16 byte aligned
+;
+;             In: BufferPtrPtr - Pointer to buffer pointer
+;            Out: BufferPtrPtr - Pointer to buffer pointer that has been 16 byte aligned
+;
+;All registers preserved.
+;===============================================================================
+AlignPointerTo16Byte PROC CALLCONV PUBLIC BufferPtrPtr:NEAR PTR DWORD
+        push edx
+        push eax
+        mov edx, BufferPtrPtr
+        mov eax, [edx]
+        add eax, 16
+        and ax, 0FFF0h
+        mov [edx], eax
+        pop eax
+        pop edx
+        ret
+AlignPointerTo16Byte ENDP
+
+;===============================================================================
+;MemUMFenceInstr:
+;   Serialize instruction
+;
+;             In:
+;            Out:
+;
+;All registers preserved.
+;===============================================================================
+MemUMFenceInstr PROC CALLCONV PUBLIC
+        _MFENCE
+        ret
+MemUMFenceInstr ENDP
+
+    END
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mu.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mu.c
new file mode 100644
index 0000000000..00e1308052
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/mu.c
@@ -0,0 +1,256 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HyperTransport features and sequence implementation.
+ *
+ * Implements the external AmdHtInitialize entry point.
+ * Contains routines for directing the sequence of available features.
+ * Mostly, but not exclusively, AGESA_TESTPOINT invocations should be
+ * contained in this file, and not in the feature code.
+ *
+ * From a build option perspective, it may be that a few lines could be removed
+ * from compilation in this file for certain options.  It is considered that
+ * the code savings from this are too small to be of concern and this file
+ * should not have any explicit build option implementation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 35978 $   @e \$Date: 2010-08-07 02:18:50 +0800 (Sat, 07 Aug 2010) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mu.h"
+#include "Filecode.h"
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*
+VOID
+MemUWriteCachelines (
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemUReadCachelines (
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemUDummyCLRead (
+  IN       UINT32 Address
+  );
+
+VOID
+MemUMFenceInstr (
+  VOID
+  );
+
+VOID
+MemUFlushPattern (
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+AlignPointerTo16Byte (
+  IN OUT   UINT8 **BufferPtrPtr
+  );
+*/
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+
+//----------------------------------------------------------------------------
+
+VOID
+MemUWriteCachelines (
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  UINTN Index;
+  CHAR8 *Position;
+  __m128i *Src = (void *) Pattern;
+  __m128i *Dest = (void *) (size_t)Address;
+
+  Position = (void *) Pattern;
+
+  // ssd - important: without this, the src data may get evicted from cache
+  _mm_mfence ();
+
+  for (Index = 0; Index < ClCount * 4; Index++){
+    _mm_stream_si128_fs (Dest, Src);
+    Src++;
+    Dest++;
+  }
+
+  // ssd - might not be required, but no measurable boot time impact
+  _mm_mfence ();
+}
+
+
+//----------------------------------------------------------------------------
+// MemUReadCachelines:
+//
+// Read a pattern of 72 bit times (per DQ), to test dram functionality.  The
+// pattern is a stress pattern which exercises both ISI and crosstalk.  The number
+// of cache lines to fill is dependent on DCT width mode and burstlength.
+//
+//             In: Buffer    - pointer to a buffer where read data will be stored
+//                 Address   - Physical address to be read
+//                 ClCount   - number of cachelines to be read
+
+VOID
+MemUReadCachelines (
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  UINTN Index;
+  UINT32 *Dest;
+
+  for (Index = 0; Index < ClCount * 16; Index++) {
+    Dest = (void *) &Buffer [Index * 4];
+    *Dest = __readfsdword (Address + Index * 4);
+    _mm_mfence ();
+  }
+}
+
+//----------------------------------------------------------------------------
+// MemUDummyCLRead:
+//
+//    Perform a single cache line read from a given physical address.
+//
+//              In: Address   - Physical address to be read
+//                  ClCount   - number of cachelines to be read
+
+//FUNC_ATTRIBUTE (noinline)
+VOID
+MemUDummyCLRead (
+  IN       UINT32 Address
+  )
+{
+  _mm_sfence ();
+  __readfsbyte (Address);
+}
+
+//----------------------------------------------------------------------------
+
+VOID
+MemUMFenceInstr (
+  VOID
+  )
+{
+  _mm_mfence ();
+}
+
+//----------------------------------------------------------------------------
+// MemUFlushPattern:
+//
+//  Flush a pattern of 72 bit times (per DQ) from cache.  This procedure is used
+//  to ensure cache miss on the next read training.
+//
+//              In: Address   - Physical address to be flushed
+//                  ClCount   - number of cachelines to be flushed
+//FUNC_ATTRIBUTE(noinline)
+VOID
+MemUFlushPattern (
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  UINTN Index;
+
+  // ssd - theory: a tlb flush is needed to avoid problems with clflush
+  __writemsr (0x20F, __readmsr (0x20F));
+
+  for (Index = 0; Index < ClCount; Index++) {
+    // mfence prevents speculative execution of the clflush
+    _mm_mfence ();
+    _mm_clflush_fs ((void *) (size_t) (Address + Index * 64));
+  }
+}
+
+//----------------------------------------------------------------------------
+
+//FUNC_ATTRIBUTE(noinline)
+VOID
+AlignPointerTo16Byte (
+  IN OUT   UINT8 **BufferPtrPtr
+  )
+{
+  size_t Address = (size_t) *BufferPtrPtr;
+  Address += 15;
+  Address -= Address % 16;
+  *BufferPtrPtr = (void *) Address;
+}
+
+//----------------------------------------------------------------------------
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/muc.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/muc.c
new file mode 100644
index 0000000000..84a1c81ba7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Main/muc.c
@@ -0,0 +1,721 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * muc.c
+ *
+ * Utility functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56322 $ @e \$Date: 2011-07-11 16:51:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "cpuServices.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mu.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuCacheInit.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MUC_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+CONST UINT32 Pattern2[16] = {
+  0x12345678, 0x87654321, 0x23456789, 0x98765432,
+  0x59385824, 0x30496724, 0x24490795, 0x99938733,
+  0x40385642, 0x38465245, 0x29432163, 0x05067894,
+  0x12349045, 0x98723467, 0x12387634, 0x34587623
+};
+
+CONST UINT32 MaxLatPat[48] = {
+  0x6E0E3FAC, 0x0C3CFF52,
+  0x4A688181, 0x49C5B613,
+  0x7C780BA6, 0x5C1650E3,
+  0x0C4F9D76, 0x0C6753E6,
+  0x205535A5, 0xBABFB6CA,
+  0x610E6E5F, 0x0C5F1C87,
+  0x488493CE, 0x14C9C383,
+  0xF5B9A5CD, 0x9CE8F615,
+
+  0xAAD714B5, 0xC38F1B4C,
+  0x72ED647C, 0x669F7562,
+  0x5233F802, 0x4A898B30,
+  0x10A40617, 0x3326B465,
+  0x55386E04, 0xC807E3D3,
+  0xAB49E193, 0x14B4E63A,
+  0x67DF2495, 0xEA517C45,
+  0x7624CE51, 0xF8140C51,
+
+  0x4824BD23, 0xB61DD0C9,
+  0x072BCFBE, 0xE8F3807D,
+  0x919EA373, 0x25E30C47,
+  0xFEB12958, 0x4DA80A5A,
+  0xE9A0DDF8, 0x792B0076,
+  0xE81C73DC, 0xF025B496,
+  0x1DB7E627, 0x808594FE,
+  0x82668268, 0x655C7783
+};
+
+CONST UINT8 PatternJD[9] = {0x44, 0xA6, 0x38, 0x4F, 0x4B, 0x2E, 0xEF, 0xD5, 0x54};
+
+CONST UINT8 PatternJD_256[256] = {
+  0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0x00, 0x00,
+  0xFF, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF,
+  0xFF, 0x00, 0xFF, 0xFF, 0xFF, 0x00, 0xFF, 0xFF,
+  0xFF, 0xFF, 0x00, 0xF7, 0x08, 0xF7, 0x00, 0xFF,
+  0x00, 0xF7, 0x00, 0xFF, 0x00, 0xF7, 0x00, 0xF7,
+  0x08, 0xF7, 0x08, 0xFF, 0x00, 0xFF, 0x08, 0xFF,
+  0x00, 0xFF, 0x08, 0xFF, 0x08, 0xF7, 0xFB, 0x04,
+  0xFB, 0xFB, 0x04, 0xFB, 0xFB, 0xFB, 0x04, 0xFB,
+  0xFB, 0xFB, 0xFB, 0x04, 0xFB, 0x04, 0x04, 0xFB,
+  0x04, 0x04, 0x04, 0xFB, 0x04, 0x04, 0x04, 0x04,
+  0xFB, 0x7F, 0x80, 0x7F, 0x00, 0xFF, 0x00, 0x7F,
+  0x00, 0xFF, 0x00, 0x7F, 0x00, 0x7F, 0x80, 0x7F,
+  0x80, 0xFF, 0x00, 0xFF, 0x80, 0xFF, 0x00, 0xFF,
+  0x80, 0xFF, 0x80, 0x7F, 0xBF, 0x40, 0xBF, 0xBF,
+  0x40, 0xBF, 0xBF, 0xBF, 0x40, 0xBF, 0xBF, 0xBF,
+  0xBF, 0x40, 0xBF, 0x40, 0x40, 0xBF, 0x40, 0x40,
+  0x40, 0xBF, 0x40, 0x40, 0x40, 0x40, 0xBF, 0xFD,
+  0x02, 0xFD, 0x00, 0xFF, 0x00, 0xFD, 0x00, 0xFF,
+  0x00, 0xFD, 0x00, 0xFD, 0x02, 0xFD, 0x02, 0xFF,
+  0x00, 0xFF, 0x02, 0xFF, 0x00, 0xFF, 0x02, 0xFF,
+  0x02, 0xFD, 0xFE, 0x01, 0xFE, 0xFE, 0x01, 0xFE,
+  0xFE, 0xFE, 0x01, 0xFE, 0xFE, 0xFE, 0xFE, 0x01,
+  0xFE, 0x01, 0x01, 0xFE, 0x01, 0x01, 0x01, 0xFE,
+  0x01, 0x01, 0x01, 0x01, 0xFE, 0xDF, 0x20, 0xDF,
+  0x00, 0xFF, 0x00, 0xDF, 0x00, 0xFF, 0x00, 0xDF,
+  0x00, 0xDF, 0x20, 0xDF, 0x20, 0xFF, 0x00, 0xFF,
+  0x20, 0xFF, 0x00, 0xFF, 0x20, 0xFF, 0x20, 0xDF,
+  0xEF, 0x10, 0xEF, 0xEF, 0x10, 0xEF, 0xEF, 0xEF,
+  0x10, 0xEF, 0xEF, 0xEF, 0xEF, 0x10, 0xEF, 0x10,
+  0x10, 0xEF, 0x10, 0x10, 0x10, 0xEF, 0x10, 0x10,
+  0x10, 0x10, 0xEF, 0xF7, 0x00, 0xFF, 0x04, 0x7F,
+  0x00, 0xFF, 0x40, 0xFD, 0x00, 0xFF, 0x01, 0xDF
+};
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function returns the (index)th UINT8
+ *   from an indicated test pattern.
+ *
+ *     @param[in] Pattern - encoding of test pattern type
+ *     @param[in] Buffer[] - buffer to be filled
+ *     @param[in] Size - Size of the buffer
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemUFillTrainPattern (
+  IN       TRAIN_PATTERN Pattern,
+  IN       UINT8 Buffer[],
+  IN       UINT16 Size
+  )
+{
+  UINT8 Result;
+  UINT8 i;
+  UINT8 Mask;
+  UINT16 Index;
+  UINT16 k;
+
+  for (Index = 0; Index < Size; Index++) {
+    k = Index;
+    // get one byte from Pattern
+    switch (Pattern) {
+    case TestPattern0:
+      Result = 0xAA;
+      break;
+    case TestPattern1:
+      Result = 0x55;
+      break;
+    case TestPattern2:
+      ASSERT (Index < sizeof (Pattern2));
+      Result = ((UINT8 *)Pattern2)[Index];
+      break;
+    case TestPatternML:
+      if (Size != 6 * 64) {
+        Result = ((UINT8 *)MaxLatPat)[Index];
+      } else {
+        Result = ((UINT8 *)MaxLatPat)[Index & 0xF7];
+      }
+      break;
+    case TestPatternJD256B:
+      k >>= 1;
+      // break is not being used here because TestPatternJD256B also need
+      // to run TestPatternJD256A sequence.
+    case TestPatternJD256A:
+      k >>= 3;
+      ASSERT (k < sizeof (PatternJD_256));
+      Result = PatternJD_256[k];
+      break;
+    case TestPatternJD1B:
+      k >>= 1;
+      // break is not being used here because TestPatternJD1B also need
+      // to run TestPatternJD1A sequence.
+    case TestPatternJD1A:
+      k >>= 3;
+      i = (UINT8) (k >> 3);
+      Mask = (UINT8) (0x80 >> (k & 7));
+
+      if (i == 0) {
+        Result = 0;
+      } else {
+        Result = (UINT16)1 << (i - 1);
+      }
+
+      ASSERT (i < sizeof (PatternJD));
+      if (PatternJD[i] & Mask) {
+        Result = ~Result;
+      }
+      break;
+    case TestPattern3:
+      Result = 0x36;
+      break;
+    case TestPattern4:
+      Result = 0xC9;
+      break;
+    default:
+      Result = 0;
+      IDS_ERROR_TRAP;
+    }
+
+    // fill in the Pattern buffer
+    Buffer[Index] = Result;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function flushes cache lines
+ *
+ *     @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ *     @param[in] ClCount - Number of cache lines
+ *     @param[in] Address - System Address [47:16]
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemUProcIOClFlush (
+  IN       UINT32 Address,
+  IN       UINT16 ClCount,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  MemUSetTargetWTIO (Address, MemPtr);
+  MemUFlushPattern (MemUSetUpperFSbase (Address, MemPtr), ClCount);
+  MemUResetTargetWTIO (MemPtr);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets the upper 32-bits of the Base address, 4GB aligned) for the FS selector.
+ *      @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ *      @param[in] Address - System Address [47:16]
+ *
+ *     @return  Address - Lowest 32-bit of physical address
+ * ----------------------------------------------------------------------------
+ */
+
+UINT32
+MemUSetUpperFSbase (
+  IN       UINT32 Address,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  S_UINT64 SMsr;
+
+  SMsr.lo = 0;
+  SMsr.hi = Address >> 16;
+  LibAmdMsrWrite (FS_BASE, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  return Address << 16;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function resets the target address space to Write Through IO by disabling IORRs
+ *
+ *      @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemUResetTargetWTIO (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  S_UINT64 SMsr;
+  SMsr.hi = 0;
+  SMsr.lo = 0;
+  LibAmdMsrWrite (IORR0_MASK, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function sets the target range to WT IO (using an IORR overlapping
+ *       the already existing
+ *
+ *      @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ *      @param[in] Address - System Address [47:16]
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemUSetTargetWTIO (
+  IN       UINT32 Address,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  S_UINT64 SMsr;
+
+  SMsr.lo = Address << 16;
+  SMsr.hi = Address >> 16;
+  LibAmdMsrWrite (IORR0_BASE,(UINT64 *)&SMsr, &MemPtr->StdHeader);           // IORR0 Base
+  SMsr.hi = 0xFFFF;
+  SMsr.lo = 0xFC000800;
+  LibAmdMsrWrite (IORR0_MASK, (UINT64 *)&SMsr, &MemPtr->StdHeader);          // 64MB Mask
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Waits specified number of 10ns cycles
+ *      @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ *      @param[in] Count - Number of 10ns cycles to wait; Note that Count must not exceed 1000000
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemUWait10ns (
+  IN       UINT32 Count,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT64 TargetTsc;
+  UINT64 CurrentTsc;
+
+  ASSERT (Count <= 1000000);
+
+  MemUMFenceInstr ();
+
+  LibAmdMsrRead (TSC, &CurrentTsc, &MemPtr->StdHeader);
+  TargetTsc = CurrentTsc + ((Count * MemPtr->TscRate + 99) / 100);
+  do {
+    LibAmdMsrRead (TSC, &CurrentTsc, &MemPtr->StdHeader);
+  } while (CurrentTsc < TargetTsc);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      Find the entry of platform specific overriding table.
+ *
+ *      @param[in] PlatformMemoryConfiguration - Platform config table
+ *      @param[in] EntryType - Entry type
+ *      @param[in] SocketID - Physical socket ID
+ *      @param[in] ChannelID - Physical channel ID
+ *      @param[in] DimmID - Physical Dimm ID
+ *      @param[in] *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *      @param[in,out]  *StdHeader - Pointer of AMD_CONFIG_PARAMS
+ *                 - If both *LogicalIdPtr and *StdHeader are "NULL" input,
+ *                   that means, the "EntryType" are not CPU family dependent,
+ *                   ex. PSO_MAX_DIMMS for NUMBER_OF_DIMMS_SUPPORTED macro.
+ *
+ *
+ *      @return  NULL - entry could not be found.
+ *      @return  Pointer - points to the entry's data.
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID *
+FindPSOverrideEntry (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       PSO_ENTRY EntryType,
+  IN       UINT8 SocketID,
+  IN       UINT8 ChannelID,
+  IN       UINT8 DimmID,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 *Buffer;
+  CPU_LOGICAL_ID LogicalCpuId;
+  UINT32 RawCpuId;
+
+  LogicalCpuId.Family = AMD_FAMILY_UNKNOWN;
+  LogicalCpuId.Revision = 0;
+  RawCpuId = 0;
+
+  Buffer = PlatformMemoryConfiguration;
+  //
+  // Do not need to look for CPU family specific PSO if LogicalIdPtr and StdHeader are NULL.
+  //
+  if ((LogicalIdPtr != NULL) && (StdHeader != NULL)) {
+    //
+    // Looking for the CPU family signature followed by CPUID value.
+    // And check to see if the CPUID value is matched with current CPU's :
+    //    - If matched, Buffer points to following PSO macros' start address.
+    //    - If not matched, Buffer points to PlatformMemoryConfiguration for global PSO parsing.
+    //
+    while (Buffer[0] != PSO_END) {
+      if (Buffer[0] == PSO_CPU_FAMILY_TO_OVERRIDE) {
+        RawCpuId = *(UINT32 *)&Buffer[2];
+        GetLogicalIdFromCpuid (RawCpuId, &LogicalCpuId, StdHeader);
+        if ((LogicalCpuId.Family & LogicalIdPtr->Family) != 0) {
+          if ((LogicalCpuId.Revision & LogicalIdPtr->Revision) != 0) {
+            Buffer += Buffer[1] + 2;
+            break;
+          }
+        }
+      }
+      Buffer += Buffer[1] + 2;
+    }
+    //
+    // If no CPU family specific PSO macros exist, Buffer points to PlatformMemoryConfiguration again
+    //
+    if (Buffer[0] == PSO_END) {
+      Buffer = PlatformMemoryConfiguration;
+    }
+  }
+
+  while ((Buffer[0] != PSO_END) && (Buffer[0] != PSO_CPU_FAMILY_TO_OVERRIDE)) {
+    if (Buffer[0] == EntryType) {
+      if ((Buffer[2] & ((UINT8) 1 << SocketID)) != 0 ) {
+        if ((Buffer[3] & ((UINT8) 1 << ChannelID)) != 0 ) {
+          if ((Buffer[4] & ((UINT8) 1 << DimmID)) != 0 ) {
+            return &Buffer[5];
+          }
+        }
+      }
+    }
+    Buffer += Buffer[1] + 2;
+  }
+
+  return NULL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function returns the max dimms for a given memory channel on a given
+ *  processor.  It first searches the platform override table for the max dimms
+ *  value.  If it is not provided, the AGESA default value is returned. The target
+ *  socket must be a valid present socket.
+ *
+ *     @param[in] PlatformMemoryConfiguration - Platform config table
+ *     @param[in] SocketID  - ID of the processor that owns the channel
+ *     @param[in] ChannelID - Channel to get max dimms for
+ *
+ *
+ *     @return UINT8 - Max Number of Dimms for that channel
+ */
+UINT8
+GetMaxDimmsPerChannel (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       UINT8 SocketID,
+  IN       UINT8 ChannelID
+  )
+{
+  UINT8  *DimmsPerChPtr;
+  UINT8  MaxDimmPerCH;
+
+  DimmsPerChPtr = FindPSOverrideEntry (PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = MAX_DIMMS_PER_CHANNEL;
+  }
+  // Maximum number of dimms per channel cannot be larger than its default value.
+  ASSERT (MaxDimmPerCH <= MAX_DIMMS_PER_CHANNEL);
+
+  return MaxDimmPerCH;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function returns the max memory channels on a given processor.
+ *  It first searches the platform override table for the max channels value.
+ *  If it is not provided, the AGESA default value is returned.
+ *
+ *     @param[in] PlatformMemoryConfiguration - Platform config table
+ *     @param[in] SocketID - ID of the processor
+ *     @param[in] StdHeader - Header for library and services
+ *
+ *
+ *     @return UINT8 - Max Number of Channels on that Processor
+ */
+UINT8
+GetMaxChannelsPerSocket (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       UINT8 SocketID,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8  *ChannelsPerSocketPtr;
+  UINT8  MaxChannelsPerSocket;
+
+  if (IsProcessorPresent (SocketID, StdHeader)) {
+    ChannelsPerSocketPtr = FindPSOverrideEntry (PlatformMemoryConfiguration, PSO_MAX_CHNLS, SocketID, 0, 0, NULL, NULL);
+    if (ChannelsPerSocketPtr != NULL) {
+      MaxChannelsPerSocket = *ChannelsPerSocketPtr;
+    } else {
+      MaxChannelsPerSocket = MAX_CHANNELS_PER_SOCKET;
+    }
+    // Maximum number of channels per socket cannot be larger than its default value.
+    ASSERT (MaxChannelsPerSocket <= MAX_CHANNELS_PER_SOCKET);
+  } else {
+    MaxChannelsPerSocket = 0;
+  }
+
+  return MaxChannelsPerSocket;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function returns the max number of chip select on a given channel of
+ *  a given processor. It first searches the platform override table for the max
+ *  chip select value. If it is not provided, the AGESA default value is returned.
+ *  The target socket must be a valid present socket.
+ *
+ *     @param[in] PlatformMemoryConfiguration - Platform config table
+ *     @param[in] SocketID - ID of the processor
+ *     @param[in] ChannelID - ID of a channel
+ *
+ *
+ *     @return UINT8 - Max Number of chip selects on the channel of the Processor
+ */
+UINT8
+GetMaxCSPerChannel (
+  IN      PSO_TABLE *PlatformMemoryConfiguration,
+  IN      UINT8 SocketID,
+  IN      UINT8 ChannelID
+  )
+{
+  UINT8  *CSPerSocketPtr;
+  UINT8  MaxCSPerChannel;
+
+  CSPerSocketPtr = FindPSOverrideEntry (PlatformMemoryConfiguration, PSO_MAX_CHIPSELS, SocketID, ChannelID, 0, NULL, NULL);
+  if (CSPerSocketPtr != NULL) {
+    MaxCSPerChannel = *CSPerSocketPtr;
+  } else {
+    MaxCSPerChannel = MAX_CS_PER_CHANNEL;
+  }
+  // Max chip select per channel cannot be larger than its default value
+  ASSERT (MaxCSPerChannel <= MAX_CS_PER_CHANNEL);
+
+  return MaxCSPerChannel;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function returns the index of the first Dimm SPD structure for a
+ *  given processor socket. It checks the Max Dimms per channel for every memory
+ *  channel on every processor up to the current one, and adds them together.
+ *
+ *      This function may also be used to calculate the maximum dimms per system
+ *  by passing the total number of dimm sockets
+ *
+ *     @param[in] PlatformMemoryConfiguration - Platform config table
+ *     @param[in] SocketID - ID of the processor
+ *     @param[in] StdHeader - Header for library and services
+ *
+ *     @return UINT8 - SPD Index
+ */
+UINT8
+GetSpdSocketIndex (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       UINT8 SocketID,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 SpdSocketIndex;
+  UINT8 Socket;
+  UINT8 Channel;
+  UINT8  MaxChannelsPerSocket;
+
+  SpdSocketIndex = 0;
+  for (Socket = 0; Socket < SocketID; Socket++) {
+    MaxChannelsPerSocket = GetMaxChannelsPerSocket (PlatformMemoryConfiguration, Socket, StdHeader);
+    for (Channel = 0; Channel < MaxChannelsPerSocket; Channel++) {
+      SpdSocketIndex = SpdSocketIndex + GetMaxDimmsPerChannel (PlatformMemoryConfiguration, Socket, Channel);
+    }
+  }
+  return SpdSocketIndex;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function returns the index of the first Dimm SPD structure for a
+ *  given channel relative to the processor socket. It checks the Max Dimms per
+ *  channel for every memory channel on that processor up to the current one,
+ *  and adds them together.
+ *
+ *      This function may also be used to calculate the maximum dimms per system
+ *  by passing the total number of DIMM sockets
+ *
+ *     @param[in] PlatformMemoryConfiguration - Platform config table
+ *     @param[in] SocketID - ID of the processor
+ *     @param[in] ChannelID - ID of the Channel
+ *     @param[in] StdHeader - Header for library and services
+ *
+ *     @return UINT8 - SPD Index
+ */
+UINT8
+GetSpdChannelIndex (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       UINT8 SocketID,
+  IN       UINT8 ChannelID,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 SpdChannelIndex;
+  UINT8 Channel;
+
+  SpdChannelIndex = 0;
+  ASSERT (ChannelID < GetMaxChannelsPerSocket (PlatformMemoryConfiguration, SocketID, StdHeader))
+  for (Channel = 0; Channel < ChannelID; Channel++) {
+    SpdChannelIndex = SpdChannelIndex + GetMaxDimmsPerChannel (PlatformMemoryConfiguration, SocketID, Channel);
+  }
+  return SpdChannelIndex;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function returns the upper 32 bits mask for variable MTRR based on
+ *     the CPU_LOGICAL_ID.
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *     @param[in]       StdHeader - Header for library and services
+ *
+ *     @return          UINT32 - MTRR mask for upper 32 bits
+ *
+ */
+UINT32
+GetVarMtrrHiMsk (
+  IN       CPU_LOGICAL_ID *LogicalIdPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 TempNotCare;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  CONST CACHE_INFO *CacheInfoPtr;
+
+  GetCpuServicesFromLogicalId (LogicalIdPtr, (CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &TempNotCare, StdHeader);
+  return (UINT32) (CacheInfoPtr->VariableMtrrMask >> 32);
+}
+
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function returns number of memclk converted from ns
+ *     @param[in]       Speed - memclk frequency
+ *     @param[in]       NumberOfns - number of ns to be converted
+ *
+ *     @return          UINT32 - number of memclk
+ *
+ */
+UINT32
+MemUnsToMemClk (
+  IN       MEMORY_BUS_SPEED Speed,
+  IN       UINT32 NumberOfns
+  )
+{
+  return (UINT32) ((NumberOfns * Speed + 999) / 1000);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnParTrainc32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnParTrainc32.c
new file mode 100644
index 0000000000..c04438339b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnParTrainc32.c
@@ -0,0 +1,228 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnParTrainc32.c
+ *
+ * Feature which performs Memory DQS training on each node with each node training
+ * its own memory through code running on a core in the associated processor.
+ * This way memory can be trained in parallel by more than one processor.
+ *
+ * This file contains the C32 specific parallel training function.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 54775 $ @e \$Date: 2011-06-12 21:05:26 -0600 (Sun, 12 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+  *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnc32.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "mfParallelTraining.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_C32_MNPARTRAINC32_FILECODE
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+BOOLEAN
+MemFParallelTrainingC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+STATIC
+MemConstructRemoteNBBlockC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       DIE_STRUCT *MCTPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr
+);
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *       This is the training function which set up the environment for remote
+ * training on the ap and launches the remote routine.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  Launch training on AP successfully.
+ *     @return          FALSE - Fail to launch training on AP.
+ */
+BOOLEAN
+MemFParallelTrainingC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  AMD_CONFIG_PARAMS *StdHeader;
+  DIE_STRUCT *MCTPtr;
+  REMOTE_TRAINING_ENV *EnvPtr;
+  AP_TASK TrainingTask;
+  UINT8 Socket;
+  UINT8 Module;
+  UINT8 APCore;
+  UINT8 p;
+  UINT32 LowCore;
+  UINT32 HighCore;
+  UINT32 BspSocket;
+  UINT32 BspModule;
+  UINT32 BspCore;
+  AGESA_STATUS Status;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  UINT16 MctDataSize;
+  StdHeader = &(NBPtr->MemPtr->StdHeader);
+  MCTPtr = NBPtr->MCTPtr;
+  Socket = MCTPtr->SocketId;
+  Module = MCTPtr->DieId;
+
+  //
+  // Allocate buffer for REMOTE_TRAINING_ENV
+  //
+  MctDataSize = MAX_DCTS_PER_NODE_C32 * (
+                  sizeof (DCT_STRUCT) + (
+                    MAX_CHANNELS_PER_DCT_C32 * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                  )
+                );
+  AllocHeapParams.RequestedBufferSize = MctDataSize + sizeof (REMOTE_TRAINING_ENV);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, Socket, Module, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+    EnvPtr = (REMOTE_TRAINING_ENV *) AllocHeapParams.BufferPtr;
+    AllocHeapParams.BufferPtr += sizeof (REMOTE_TRAINING_ENV);
+
+    //
+    // Setup Remote training environment
+    //
+    LibAmdMemCopy (&(EnvPtr->StdHeader), StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+    LibAmdMemCopy (&(EnvPtr->DieStruct), MCTPtr, sizeof (DIE_STRUCT), StdHeader);
+    for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+      EnvPtr->GetPlatformCfg[p] = NBPtr->MemPtr->GetPlatformCfg[p];
+    }
+    EnvPtr->ErrorHandling = NBPtr->MemPtr->ErrorHandling;
+    EnvPtr->NBBlockCtor = MemConstructRemoteNBBlockC32;
+    EnvPtr->FeatPtr = NBPtr->FeatPtr;
+    EnvPtr->HoleBase = NBPtr->RefPtr->HoleBase;
+    EnvPtr->BottomIo = NBPtr->RefPtr->BottomIo;
+    EnvPtr->UmaSize = NBPtr->RefPtr->UmaSize;
+    EnvPtr->SysLimit = NBPtr->RefPtr->SysLimit;
+    EnvPtr->TableBasedAlterations = NBPtr->RefPtr->TableBasedAlterations;
+    EnvPtr->PlatformMemoryConfiguration = NBPtr->RefPtr->PlatformMemoryConfiguration;
+
+    LibAmdMemCopy (AllocHeapParams.BufferPtr, MCTPtr->DctData, MctDataSize, StdHeader);
+
+    //
+    // Get Socket, Core of the BSP
+    //
+    IdentifyCore (StdHeader, &BspSocket, &BspModule, &BspCore, &Status);
+    EnvPtr->BspSocket = ((UINT8)BspSocket & 0x000000FF);
+    EnvPtr->BspCore = ((UINT8)BspCore & 0x000000FF);
+
+    //
+    // Set up the remote task structure
+    //
+    TrainingTask.DataTransfer.DataPtr = EnvPtr;
+    TrainingTask.DataTransfer.DataSizeInDwords = (UINT16) (AllocHeapParams.RequestedBufferSize + 3) / 4;
+    TrainingTask.DataTransfer.DataTransferFlags = 0;
+    TrainingTask.ExeFlags = 0;
+    TrainingTask.FuncAddress.PfApTaskI = (PF_AP_TASK_I)MemFParallelTraining;
+
+    //
+    // Get Target AP Core
+    //
+    GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader);
+    APCore = (UINT8) (LowCore & 0x000000FF);
+
+    //
+    // Launch Remote Training
+    //
+    ApUtilRunCodeOnSocketCore (Socket, APCore, &TrainingTask, StdHeader);
+
+    HeapDeallocateBuffer (AllocHeapParams.BufferHandle, StdHeader);
+
+    return TRUE;
+  } else {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV, NBPtr->Node, 0, 0, 0, StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocated heap space for "REMOTE_TRAINING_ENV"
+    return FALSE;
+  }
+}
+
+BOOLEAN
+STATIC
+MemConstructRemoteNBBlockC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       DIE_STRUCT *MCTPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr
+  )
+{
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+
+  MemNInitNBDataC32 (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+  FeatPtr->InitHwRxEn (NBPtr);
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  //----------------------------------------------------------------------------
+  // Get TSC rate of the this AP
+  //----------------------------------------------------------------------------
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &NBPtr->MemPtr->StdHeader);
+  FamilySpecificServices->GetTscRate (FamilySpecificServices, &NBPtr->MemPtr->TscRate, &NBPtr->MemPtr->StdHeader);
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnS3c32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnS3c32.c
new file mode 100644
index 0000000000..fda4f405e5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnS3c32.c
@@ -0,0 +1,746 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mns3c32.c
+ *
+ * C32 memory specific function to support S3 resume
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 59560 $ @e \$Date: 2011-09-26 11:43:44 -0600 (Mon, 26 Sep 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "mnc32.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mnS3c32.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_C32_MNS3C32_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemS3ResumeConstructNBBlockC32 (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+UINT16
+STATIC
+MemNS3GetRegLstPtrC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  );
+
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstC32 (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  );
+
+VOID
+STATIC
+MemNS3SetSpecialPCIRegC32 (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+STATIC
+MemNS3ExitSelfRefRegC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+PCI_SPECIAL_CASE PciSpecialCaseFuncC32[] = {
+  {MemNS3GetCSRNb, MemNS3SetCSRNb},
+  {MemNS3GetCSRNb, MemNS3SetSpecialPCIRegC32},
+  {MemNS3GetBitFieldNb, MemNS3SetBitFieldNb}
+};
+
+PCI_REG_DESCRIPTOR ROMDATA S3PciPreSelfRefDescriptorC32[] = {
+  {{0, 0, 0}, FUNC_2, 0x110, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x40,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x48,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x50,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x58,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x60,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x68,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x70,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x78,  0xFFFF3F03},
+  {{0, 1, 0}, FUNC_1, 0x140, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x148, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x150, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x158, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x160, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x168, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x170, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x178, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0x44,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x4C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x54,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x5C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x64,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x6C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x74,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x7C,  0xFFFF07FF},
+  {{0, 1, 0}, FUNC_1, 0x144, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x14C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x154, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x15C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x164, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x16C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x174, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x17C, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0xF0,  0xFF00FF83},
+  {{0, 0, 0}, FUNC_1, 0x120, 0x00FFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x124, 0x07FFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x114, 0xFFFFFC00},
+  {{0, 0, 0}, FUNC_2, 0x118, 0xF773FFFF},
+  {{0, 0, 0}, FUNC_2, 0x11C, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x1B0, 0xFFD3FF3F}
+};
+
+CONST PCI_REGISTER_BLOCK_HEADER ROMDATA S3PciPreSelfRefC32 = {
+  0,
+  (sizeof (S3PciPreSelfRefDescriptorC32) / sizeof (PCI_REG_DESCRIPTOR)),
+  S3PciPreSelfRefDescriptorC32,
+  NULL
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPreSelfDescriptorC32[] = {
+   // DCT 0
+  {{0, 0, 0}, FUNC_2, 0x40,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x44,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x48,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x4C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x50,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x54,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x58,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x5C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x60,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x64,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x68,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x6C,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x78,  0xFFCDBF0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x7C,  0xFFF7FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x80,  0x0000FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x84,  0x07FFEFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x88,  0xFFFFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x8C,  0xFFFF7FFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x90,  0x00FFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0xA4,  0x000F7B00, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0xA8,  0x0007FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 0, 0x180), 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 0, 0x181), 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 0, 0x182), 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 0, 0x183), 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),  0x30333333, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0x3FFFFFFF, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),  0x001FBFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),  0x003F3F3F, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig0, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig1, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig2, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig3, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  //errata 322
+  {{2, 2, 1}, DCT0,   BFErr322I, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFErr322II, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  //errata 263
+  {{2, 2, 1}, DCT0,   BFErr263, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+
+   // DCT 1
+  {{0, 0, 0}, FUNC_2, 0x140, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x144, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x148, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x14C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x150, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x154, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x158, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x15C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x160, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x164, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x168, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x16C, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x178, 0xFFCDBF0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x17C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x180, 0x0000FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x184, 0x07FFEFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x188, 0xFFFFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x18C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x190, 0x00FFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x1A4, 0x000F7B00, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x1A8, 0x0007FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 1, 0x180), 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 1, 0x181), 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 1, 0x182), 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 1, 0x183), 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00), 0x30333333, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C), 0x001FBFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04), 0x003F3F3F, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig0, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig1, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig2, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig3, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 322
+  {{2, 2, 1}, DCT1,   BFErr322I, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFErr322II, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 263
+  {{2, 2, 1}, DCT1,   BFErr263, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Restore F2x[1,0]94 right before exit self refresh
+  {{0, 0, 0}, FUNC_2, 0x94,  0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x194, 0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK}
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPreSelfRefC32 = {
+  0,
+  (sizeof (S3CPciPreSelfDescriptorC32) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPreSelfDescriptorC32,
+  PciSpecialCaseFuncC32
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPostSelfDescriptorC32[] = {
+  // DCT0
+  {{2, 2, 1}, DCT0,   BFEccDLLPwrDnConf, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFEccDLLConf, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x10),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x11),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x12),  0x000001FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x13),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x14),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x15),  0x000001FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x16),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x17),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x18),  0x000001FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x19),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1B),  0x000001FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x20),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x21),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x23),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x24),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x26),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x27),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x29),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x2A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x01),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x02),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x03),  0x0000007F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x101), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x102), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x103), 0x0000007F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x201), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x202), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x203), 0x0000007F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x301), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x302), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x303), 0x0000007F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x05),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x06),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x07),  0x0000003F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x105), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x106), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x107), 0x0000003F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x205), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x206), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x207), 0x0000003F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x305), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x306), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x307), 0x0000003F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0xFFFFFFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0D),  0x23772377, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x30),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x31),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x32),  0x000000FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x33),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x34),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x35),  0x000000FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x36),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x37),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x38),  0x000000FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x39),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3B),  0x000000FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x40),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x41),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x43),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x44),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x46),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x47),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x49),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x4A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+
+    // DCT1
+  {{2, 2, 1}, DCT0,   BFEccDLLPwrDnConf, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFEccDLLConf, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x10),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x11),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x12),  0x000001FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x13),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x14),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x15),  0x000001FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x16),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x17),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x18),  0x000001FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x19),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1B),  0x000001FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x20),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x21),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x23),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x24),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x26),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x27),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x29),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x2A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x01),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x02),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x03),  0x0000007F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x101),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x102),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x103),  0x0000007F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x201),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x202),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x203),  0x0000007F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x301),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x302),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x303),  0x0000007F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x05),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x06),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x07),  0x0000003F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x105),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x106),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x107),  0x0000003F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x205),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x206),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x207),  0x0000003F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x305),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x306),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x307),  0x0000003F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0D),  0x23772377, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x30),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x31),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x32),  0x000000FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x33),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x34),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x35),  0x000000FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x36),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x37),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x38),  0x000000FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x39),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3B),  0x000000FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x40),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x41),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x43),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x44),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x46),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x47),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x49),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x4A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+
+  // DllShutDown
+  {{2, 2, 1}, DCT0,   BFPhyPLLLockTime, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyDLLLockTime, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT0,   BFDisDllShutdownSR, 0x00000001, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyPLLLockTime, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyDLLLockTime, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT1,   BFDisDllShutdownSR, 0x00000001, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Restore scrubber related registers after restoring training related registers
+  {{0, 0, 0}, FUNC_3, 0x180, 0x027F7BFF, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x44,  0xFFFFFFFE, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x58,  0x1F1F1F1F, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT0,   BFScrubReDirEn, 0x00000001, ANY_DIMM_MASK, ANY_DIMM_MASK}
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPostSelfRefC32 = {
+  0,
+  (sizeof (S3CPciPostSelfDescriptorC32) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPostSelfDescriptorC32,
+  PciSpecialCaseFuncC32
+};
+
+MSR_REG_DESCRIPTOR ROMDATA S3MSRPreSelfRefDescriptorC32[] = {
+  {{0, 0, 0}, 0xC0010010, 0x00000000007F07FF},
+  {{0, 0, 0}, 0xC001001A, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001D, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001F, 0xC047F87FFF527FFF}
+};
+
+CONST MSR_REGISTER_BLOCK_HEADER ROMDATA S3MSRPreSelfRefC32 = {
+  0,
+  (sizeof (S3MSRPreSelfRefDescriptorC32) / sizeof (MSR_REG_DESCRIPTOR)),
+  S3MSRPreSelfRefDescriptorC32,
+  NULL
+};
+
+VOID *MemS3RegListC32[] = {
+  (VOID *)&S3PciPreSelfRefC32,
+  NULL,
+  (VOID *)&S3CPciPreSelfRefC32,
+  (VOID *)&S3CPciPostSelfRefC32,
+  (VOID *)&S3MSRPreSelfRefC32,
+  NULL,
+  NULL,
+  NULL
+};
+
+CONST UINT16 ROMDATA SpecialCasePCIRegC32[] = {
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04)
+};
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for S3 resume
+ *
+ *     @param[in,out]   *S3NBPtr   - Pointer to MEM_NB_BLOCK.
+ *     @param[in,out]   *MemPtr  - Pointer to MEM_DATA_STRUCT.
+ *     @param[in]       NodeID   - Node ID of the target node.
+ *
+ *     @return         BOOLEAN
+ *                         TRUE - This is the correct constructor for the targeted node.
+ *                         FALSE - This isn't the correct constructor for the targeted node.
+ */
+
+BOOLEAN
+MemS3ResumeConstructNBBlockC32 (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  INT32 i;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = ((S3_MEM_NB_BLOCK *)S3NBPtr)->NBPtr;
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedC32 (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  InitNBRegTableC32 (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->Ganged = FALSE;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_C32;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_C32;
+
+  for (i = 0; i < EnumSize; i++) {
+    NBPtr->IsSupported[i] = FALSE;
+  }
+
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) memDefTrue;
+  }
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &MemPtr->StdHeader);
+
+  NBPtr->IsSupported[CheckDllSpeedUp] = TRUE;
+  NBPtr->SwitchDCT = MemNSwitchDCTNb;
+  NBPtr->SwitchChannel = MemNSwitchChannelNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldC32;
+  NBPtr->MemNIsIdSupportedNb = MemNIsIdSupportedC32;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3ExitSelfRefReg = MemNS3ExitSelfRefRegC32;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConPCIMask = MemNS3GetConPCIMaskNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConMSRMask = (VOID (*) (MEM_NB_BLOCK *, DESCRIPTOR_GROUP *)) memDefRet;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3Resume = MemNS3ResumeNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3RestoreScrub = MemNS3RestoreScrubNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetRegLstPtr = MemNS3GetRegLstPtrC32;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetDeviceRegLst = MemNS3GetDeviceRegLstC32;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3SpecialCaseHeapSize = (sizeof (SpecialCasePCIRegC32) / sizeof (UINT16)) * sizeof (UINT32);
+
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns the register list for each device for C32
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in, out]  *DescriptPtr - Pointer to DESCRIPTOR_GROUP
+ *     @return          UINT16 - size of the device descriptor on the target node.
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  )
+{
+  UINT8 i;
+  UINT16 Size;
+  Size = 0;
+  for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+    DescriptPtr->PCIDevice[i].Type = (UINT8) (DEV_TYPE_PCI_PRE_ESR + i);
+    DescriptPtr->PCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->PCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((PCI_REGISTER_BLOCK_HEADER *) MemS3RegListC32[PCI_LST_ESR_C32 - PCI_LST_ESR_C32 + i] != NULL) {
+      DescriptPtr->PCIDevice[i].RegisterListID = PCI_LST_ESR_C32 + i;
+      Size += sizeof (PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CPCIDevice[i].Type = (UINT8) (DEV_TYPE_CPCI_PRE_ESR + i);
+    DescriptPtr->CPCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->CPCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CPCI_REGISTER_BLOCK_HEADER *) MemS3RegListC32[CPCI_LST_ESR_C32 - PCI_LST_ESR_C32 + i] != NULL) {
+      DescriptPtr->CPCIDevice[i].RegisterListID = CPCI_LST_ESR_C32 + i;
+      Size += sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->MSRDevice[i].Type = (UINT8) (DEV_TYPE_MSR_PRE_ESR + i);
+    DescriptPtr->MSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((MSR_REGISTER_BLOCK_HEADER *) MemS3RegListC32[MSR_LST_ESR_C32 - PCI_LST_ESR_C32 + i] != NULL) {
+      DescriptPtr->MSRDevice[i].RegisterListID = MSR_LST_ESR_C32 + i;
+      Size += sizeof (MSR_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CMSRDevice[i].Type = (UINT8) (DEV_TYPE_CMSR_PRE_ESR + i);
+    DescriptPtr->CMSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CMSR_REGISTER_BLOCK_HEADER *) MemS3RegListC32[CMSR_LST_ESR_C32 - PCI_LST_ESR_C32 + i] != NULL) {
+      DescriptPtr->CMSRDevice[i].RegisterListID = CMSR_LST_ESR_C32 + i;
+      Size += sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR);
+    }
+  }
+  return Size;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function return the register list according to the register ID.
+ *
+ *     @param[in]   RegisterLstID - value of the Register list ID.
+ *     @param[out]  **RegisterHeader - pointer to the address of the register list.
+ *     @return      none
+ */
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstC32 (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  )
+{
+  if (RegisterLstID >= (sizeof (MemS3RegListC32) / sizeof (VOID *))) {
+    ASSERT(FALSE); // RegisterListID exceeded size of Register list
+    return AGESA_FATAL;
+  }
+  if (MemS3RegListC32[RegisterLstID] != NULL) {
+    *RegisterHeader = MemS3RegListC32[RegisterLstID];
+    return AGESA_SUCCESS;
+  }
+  ASSERT(FALSE); // Device register list error
+  return AGESA_FATAL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3SetSpecialPCIRegC32 (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (Address.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_C32; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_C32);
+    // Save the value in the heap at appropriate offset based on the index
+    // of the target register in the special case array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegC32) / sizeof (UINT16)); i ++) {
+        if (SpecialCasePCIRegC32[i] == Address.Address.Register) {
+          *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2)) = *(UINT32 *) Value;
+        }
+      }
+    }
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in,out]  *NBPtr - Pointer to the northbridge block.
+ *     @param[in,out]  *StdHeader - Config handle for library and services.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3ExitSelfRefRegC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  PCI_ADDR PciAddr;
+  UINT32 Value;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+  PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+  PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+  PciAddr.Address.Function = 2;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, StdHeader) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (PciAddr.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_C32; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_C32);
+    // Restore the value one by one in the sequence of the special case register array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegC32) / sizeof (UINT16)); i ++) {
+        PciAddr.Address.Register = SpecialCasePCIRegC32[i];
+        Value = *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2));
+        MemNS3SetCSRNb (AccessS3SaveWidth32, PciAddr, &Value, StdHeader);
+      }
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnS3c32.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnS3c32.h
new file mode 100644
index 0000000000..7c273afe75
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnS3c32.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnS3c32.h
+ *
+ * S3 resume memory related function for C32.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MNS3C32_H_
+#define _MNS3C32_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+/// ID for register list of C32
+typedef enum {
+  PCI_LST_ESR_C32,  ///< Assign 0x0000 for PCI register list for pre exit self refresh.
+  PCI_LST_C32,      ///< Assign 0x0001 for PCI register list for post exist self refresh.
+  CPCI_LST_ESR_C32, ///< Assign 0x0002 for conditional PCI register list for pre exit self refresh.
+  CPCI_LST_C32,     ///< Assign 0x0003 for conditional PCI register list for post exit self refresh.
+  MSR_LST_ESR_C32,  ///< Assign 0x0004 for MSR register list for pre exit self refresh.
+  MSR_LST_C32,      ///< Assign 0x0005 for MSR register list for post exit self refresh.
+  CMSR_LST_ESR_C32, ///< Assign 0x0006 for conditional MSR register list for pre exit self refresh.
+  CMSR_LST_C32      ///< Assign 0x0007 for conditional MSR register list for post exit self refresh.
+} RegisterListIDC32;
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif //_MNS3C32_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnc32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnc32.c
new file mode 100644
index 0000000000..4df1a63c3f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnc32.c
@@ -0,0 +1,493 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnc32.c
+ *
+ * Common Northbridge  functions for C32
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnc32.h"
+#include "mu.h"
+#include "S3.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_C32_MNC32_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern PSO_ENTRY DefaultPlatformMemoryConfiguration[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]        *FeatPtr  - Pointer to the MEM_FEAT_BLOCK_NB
+ *     @param[in]        *SharedPtr - Pointer to the MEM_SHARED_DATA
+ *     @param[in]        NodeID  - UINT8 indicating node ID of the NB object.
+ *
+ *     @return     Boolean indicating that this is the correct memory
+ *                 controller type for the node number that was passed in.
+ */
+
+BOOLEAN
+MemConstructNBBlockC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 SpdSocketIndex;
+  UINT8 SpdChannelIndex;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedC32 (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->SharedPtr = SharedPtr;
+
+  MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->MCTPtr->NodeId = NodeID;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+  NBPtr->VarMtrrHiMsk = GetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_C32 * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_C32 * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                                          )
+                                        );
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+    return FALSE;
+  }
+
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_C32;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_C32 * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_C32; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_C32;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].Dct = Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_C32 * sizeof (CH_DEF_STRUCT);
+  }
+  NBPtr->PSBlock = (MEM_PS_BLOCK *) AllocHeapParams.BufferPtr;
+
+  //
+  // Initialize Socket List
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_C32; Dct++) {
+    MemPtr->SocketList[MCTPtr->SocketId].ChannelPtr[(MCTPtr->DieId * 2) + Dct] = &(MCTPtr->DctData[Dct].ChData[0]);
+    MemPtr->SocketList[MCTPtr->SocketId].TimingsPtr[(MCTPtr->DieId * 2) + Dct] = &(MCTPtr->DctData[Dct].Timings);
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = (MCTPtr->DieId * 2) + Dct;
+  }
+
+  MemNInitNBDataC32 (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+  FeatPtr->InitHwRxEn (NBPtr);
+  //
+  // Calculate SPD Offsets per channel and assign pointers to the data.  At this point, we calculate the Node-Dct-Channel
+  // centric offsets and store the pointers to the first DIMM of each channel in the Channel Definition struct for that
+  // channel.  This pointer is then used later to calculate the offsets to be used for each logical dimm once the
+  // dimm types(QR or not) are known. This is done in the Technology block constructor.
+  //
+  // Calculate the SpdSocketIndex separately from the SpdChannelIndex.
+  // This will facilitate modifications due to some processors that might
+  // map the DCT-CHANNEL differently.
+  //
+  SpdSocketIndex = GetSpdSocketIndex (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, &MemPtr->StdHeader);
+  //
+  // Traverse the Dct/Channel structures
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_C32; Dct++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_C32; Channel++) {
+      //
+      // Calculate the number of Dimms on this channel using the
+      //   die/dct/channel to Socket/channel conversion.
+      //
+      SpdChannelIndex = GetSpdChannelIndex (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                            NBPtr->MCTPtr->SocketId,
+                                            MemNGetSocketRelativeChannelC32 (NBPtr, Dct, Channel),
+                                            &MemPtr->StdHeader);
+      NBPtr->MCTPtr->DctData[Dct].ChData[Channel].SpdPtr = &(MemPtr->SpdDataStructure[SpdSocketIndex + SpdChannelIndex]);
+    }
+  }
+
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes member functions and variables of NB block.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitNBDataC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+  NBPtr->PsPtr = NBPtr->PSBlock;
+
+  InitNBRegTableC32 (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_C32;
+  NBPtr->ChannelCount = MAX_CHANNELS_PER_DCT_C32;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_C32;
+  NBPtr->Ganged = FALSE;
+  NBPtr->PosTrnPattern = POS_PATTERN_256B;
+  NBPtr->MemCleared = FALSE;
+  NBPtr->StartupSpeed = DDR800_FREQUENCY;
+  NBPtr->RcvrEnDlyLimit = 0x1FF;
+  NBPtr->DefDctSelIntLvAddr = 3;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+
+  NBPtr->SetMaxLatency = MemNSetMaxLatencyNb;
+  NBPtr->getMaxLatParams = MemNGetMaxLatParamsNb;
+  NBPtr->InitializeMCT = MemNInitializeMctC32;
+  NBPtr->FinalizeMCT = MemNFinalizeMctC32;
+  NBPtr->SendMrsCmd = MemNSendMrsCmdC32;
+  NBPtr->sendZQCmd = MemNSendZQCmdNb;
+  NBPtr->WritePattern = MemNWritePatternC32;
+  NBPtr->ReadPattern = MemNReadPatternC32;
+  NBPtr->GenHwRcvEnReads = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+  NBPtr->CompareTestPattern = MemNCompareTestPatternNb;
+  NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternNb;
+  NBPtr->StitchMemory = MemNStitchMemoryNb;
+  NBPtr->AutoConfig = MemNAutoConfigC32;
+  NBPtr->PlatformSpec = MemNPlatformSpecNb;
+  NBPtr->InitMCT = MemNInitMCTNb;
+  NBPtr->DisableDCT = MemNDisableDCTNb;
+  NBPtr->StartupDCT = MemNStartupDCTNb;
+  NBPtr->SyncTargetSpeed = MemNSyncTargetSpeedNb;
+  NBPtr->ChangeFrequency = MemNChangeFrequencyNb;
+  NBPtr->RampUpFrequency = MemNRampUpFrequencyNb;
+  NBPtr->ChangeNbFrequency = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefFalse;
+  NBPtr->ProgramCycTimings = MemNProgramCycTimingsNb;
+  NBPtr->SyncDctsReady = MemNSyncDctsReadyNb;
+  NBPtr->HtMemMapInit = MemNHtMemMapInitNb;
+  NBPtr->SyncAddrMapToAllNodes = MemNSyncAddrMapToAllNodesNb;
+  NBPtr->CpuMemTyping = MemNCPUMemTypingNb;
+  NBPtr->BeforeDqsTraining = MemNBeforeDQSTrainingC32;
+  NBPtr->AfterDqsTraining = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+  NBPtr->OtherTiming = MemNOtherTimingC32;
+  NBPtr->UMAMemTyping = MemNUMAMemTypingNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelC32;
+  NBPtr->TechBlockSwitch = MemNTechBlockSwitchNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldC32;
+  NBPtr->SetEccSymbolSize = MemNSetEccSymbolSizeNb;
+  NBPtr->TrainingFlow = (VOID (*) (MEM_NB_BLOCK *)) MemNTrainingFlowNb;
+  MemNInitNBDataNb (NBPtr);
+
+  NBPtr->PollBitField = MemNPollBitFieldNb;
+  NBPtr->BrdcstCheck = MemNBrdcstCheckNb;
+  NBPtr->BrdcstSet = MemNBrdcstSetNb;
+  NBPtr->GetTrainDly = MemNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemNSetTrainDlyNb;
+  NBPtr->PhyFenceTraining = MemNPhyFenceTrainingNb;
+  NBPtr->GetSysAddr = MemNGetMCTSysAddrNb;
+  NBPtr->RankEnabled = MemNRankEnabledNb;
+  NBPtr->MemNBeforeDramInitNb = MemNBeforeDramInitC32;
+  NBPtr->MemNcmnGetSetTrainDly = MemNcmnGetSetTrainDlyNb;
+  NBPtr->MemPPhyFenceTrainingNb = MemNTrainPhyFenceNb;
+  NBPtr->MemNInitPhyComp = MemNInitPhyCompC32;
+  NBPtr->MemNBeforePlatformSpecNb = MemNBeforePlatformSpecC32;
+  NBPtr->MemNPlatformSpecificFormFactorInitNb = MemNPlatformSpecificFormFactorInitC32;
+  NBPtr->MemNPFenceAdjustNb = (VOID (*) (MEM_NB_BLOCK *, INT16 *)) memDefRet;
+  NBPtr->GetTrainDlyParms = MemNGetTrainDlyParmsNb;
+  NBPtr->TrainingPatternInit = MemNTrainingPatternInitNb;
+  NBPtr->TrainingPatternFinalize = MemNTrainingPatternFinalizeNb;
+  NBPtr->GetApproximateWriteDatDelay = MemNGetApproximateWriteDatDelayNb;
+  NBPtr->CSPerChannel = MemNCSPerChannelNb;
+  NBPtr->CSPerDelay = MemNCSPerDelayNb;
+  NBPtr->FlushPattern = MemNFlushPatternNb;
+  NBPtr->MinDataEyeWidth = MemNMinDataEyeWidthNb;
+  NBPtr->MemNCapSpeedBatteryLife = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+  NBPtr->GetUmaSize = MemNGetUmaSizeNb;
+  NBPtr->GetMemClkFreqId = MemNGetMemClkFreqIdNb;
+  NBPtr->EnableSwapIntlvRgn = (VOID (*) (MEM_NB_BLOCK *, UINT32, UINT32)) memDefRet;
+  NBPtr->WaitXMemClks = MemNWaitXMemClksNb;
+  NBPtr->MemNGetDramTerm = MemNGetDramTermNb;
+  NBPtr->MemNGetDynDramTerm = MemNGetDynDramTermNb;
+  NBPtr->MemNGetMR0CL = MemNGetMR0CLNb;
+  NBPtr->MemNGetMR0WR = MemNGetMR0WRNb;
+  NBPtr->MemNSaveMR0 = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+  NBPtr->MemNGetMR2CWL = MemNGetMR2CWLNb;
+  NBPtr->AllocateC6Storage = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+
+  NBPtr->IsSupported[SetSpareEn] = TRUE;
+  NBPtr->IsSupported[CheckSpareEn] = TRUE;
+  NBPtr->IsSupported[SetDllShutDown] = TRUE;
+  NBPtr->IsSupported[CheckEccDLLPwrDnConfig] = TRUE;
+  NBPtr->IsSupported[CheckMaxDramRate] = TRUE;
+  NBPtr->IsSupported[CheckMemClkCSPresent] = TRUE;
+  NBPtr->IsSupported[CheckMaxRdDqsDlyPtr] = TRUE;
+  NBPtr->IsSupported[CheckPhyFenceTraining] = TRUE;
+  NBPtr->IsSupported[CheckSendAllMRCmds] = TRUE;
+  NBPtr->IsSupported[CheckFindPSOverideWithSocket] = TRUE;
+  NBPtr->IsSupported[CheckODTControls] = TRUE;
+  NBPtr->IsSupported[CheckDummyCLRead] = TRUE;
+  NBPtr->IsSupported[CheckSlewWithoutMarginImprv] = TRUE;
+  NBPtr->IsSupported[CheckDllSpeedUp] = TRUE;
+  NBPtr->IsSupported[ForceEnMemHoleRemapping] = TRUE;
+
+  NBPtr->FamilySpecificHook[InitExtMMIOAddr] = MemNInitExtMMIOAddrC32;
+  NBPtr->FamilySpecificHook[ForceLvDimmVoltage] = MemNForceLvDimmVoltageC32;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the default values in the MEM_DATA_STRUCT
+ *
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+VOID
+MemNInitDefaultsC32 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT8 Socket;
+  UINT8 Channel;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  ASSERT (MemPtr != NULL);
+  RefPtr = MemPtr->ParameterListPtr;
+
+  // Memory Map/Mgt.
+  // Mask Bottom IO with 0xF8 to force hole size to have granularity of 128MB
+  RefPtr->BottomIo = 0xE0;
+  RefPtr->UmaMode = UserOptions.CfgUmaMode;
+  RefPtr->UmaSize = UserOptions.CfgUmaSize;
+  RefPtr->MemHoleRemapping = TRUE;
+  RefPtr->LimitMemoryToBelow1Tb = UserOptions.CfgLimitMemoryToBelow1Tb;
+  //
+
+
+  // Dram Timing
+  RefPtr->UserTimingMode = UserOptions.CfgTimingModeSelect;
+  RefPtr->MemClockValue = UserOptions.CfgMemoryClockSelect;
+  for (Socket = 0; Socket < MAX_SOCKETS_SUPPORTED; Socket++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_SOCKET; Channel++) {
+      MemPtr->SocketList[Socket].ChannelPtr[Channel] = NULL;
+      MemPtr->SocketList[Socket].TimingsPtr[Channel] = NULL;
+    }
+  }
+
+  // Memory Clear
+  RefPtr->EnableMemClr = TRUE;
+
+  // TableBasedAlterations
+  RefPtr->TableBasedAlterations = NULL;
+
+  // Platform config table
+  RefPtr->PlatformMemoryConfiguration = DefaultPlatformMemoryConfiguration;
+
+  // Memory Restore
+  RefPtr->MemRestoreCtl = FALSE;
+  RefPtr->SaveMemContextCtl = FALSE;
+  AmdS3ParamsInitializer (&RefPtr->MemContext);
+
+  // Dram Configuration
+  RefPtr->EnableBankIntlv = UserOptions.CfgMemoryEnableBankInterleaving;
+  RefPtr->EnableNodeIntlv = UserOptions.CfgMemoryEnableNodeInterleaving;
+  RefPtr->EnableChannelIntlv = UserOptions.CfgMemoryChannelInterleaving;
+  RefPtr->EnableBankSwizzle = UserOptions.CfgBankSwizzle;
+  RefPtr->EnableParity = UserOptions.CfgMemoryParityEnable;
+  RefPtr->EnableOnLineSpareCtl = UserOptions.CfgOnlineSpare;
+
+  // Dram Power
+  RefPtr->EnablePowerDown = UserOptions.CfgMemoryPowerDown;
+
+  // Vref
+  RefPtr->ExternalVrefCtl = UserOptions.CfgExternalVrefCtlFeature;
+
+  //Training Mode
+  RefPtr->ForceTrainMode = UserOptions.CfgForceTrainMode;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function writes training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Pattern[] - Pattern to write
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNWritePatternC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUWriteCachelines (Address, Pattern, ClCount);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function reads training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Buffer[] - Buffer to fill
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNReadPatternC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUReadCachelines (Buffer, Address, ClCount);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates DQS training for Server NB
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+memNEnableTrainSequenceC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN Retval;
+  Retval = TRUE;
+  if (!MemNIsIdSupportedC32 (NBPtr, &(NBPtr->MemPtr->DiesPerSystem[NBPtr->MCTPtr->NodeId].LogicalCpuid))) {
+    Retval = FALSE;
+  }
+  return Retval;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnc32.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnc32.h
new file mode 100644
index 0000000000..cd687f03f0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnc32.h
@@ -0,0 +1,212 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnc32.h
+ *
+ * Northbridge C32
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 47408 $ @e \$Date: 2011-02-18 09:56:31 -0700 (Fri, 18 Feb 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MNC32_H_
+#define _MNC32_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_CHANNELS_PER_SOCKET_C32    2
+#define MAX_DCTS_PER_NODE_C32          2
+#define MAX_CHANNELS_PER_DCT_C32       1
+#define MAX_NODES_SUPPORTED_C32        8
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemConstructNBBlockC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemNInitNBDataC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitDefaultsC32 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+BOOLEAN
+MemNInitializeMctC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNFinalizeMctC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNSendMrsCmdC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNAutoConfigC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNOtherTimingC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitPhyCompC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNWritePatternC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemNReadPatternC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+InitNBRegTableC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   TSEFO NBRegTable[]
+  );
+
+UINT8
+MemNGetSocketRelativeChannelC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct,
+  IN       UINT8 Channel
+  );
+
+BOOLEAN
+MemNIsIdSupportedC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+VOID
+MemNBeforeDramInitC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNEnDLLShutDownC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemNCmnGetSetFieldC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+VOID
+MemNBeforePlatformSpecC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+memNEnableTrainSequenceC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNInitExtMMIOAddrC32  (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+VOID
+MemNBeforeDQSTrainingC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNForceLvDimmVoltageC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *MemMainPtr
+  );
+
+#endif  /* _MNC32_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mndctc32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mndctc32.c
new file mode 100644
index 0000000000..af946cc341
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mndctc32.c
@@ -0,0 +1,454 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mndctc32.c
+ *
+ * Northbridge DCT support for C32
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnc32.h"
+#include "merrhdl.h"
+#include "cpuFamRegisters.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_NB_C32_MNDCTC32_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function programs the memory controller with configuration parameters
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_ERROR may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_ERROR may have occurred
+ *     @return          NBPtr->MCTPtr->ErrCode - Contains detailed AGESA_STATUS value
+ */
+
+BOOLEAN
+MemNAutoConfigC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 PowerDownMode;
+  UINT32 Value32;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  //======================================================================
+  // Build Dram Control Register Value (F2x78)
+  //======================================================================
+  //
+  //It is recommended that these bits remain in the default state.
+  //MemNSetBitFieldNb (NBPtr, BFRdPtrInit, 5);
+
+  MemNSetBitFieldNb (NBPtr, BFEarlyArbEn, 1);
+
+  //======================================================================
+  // Build Dram Config Lo Register Value
+  //======================================================================
+  //
+
+  if (MCTPtr->Status[SbParDimms]) {
+    //
+    // SbParDimms should be set for all DDR3 RDIMMS
+    // Cannot turn off ParEn for DDR3
+    //
+    //@attention - add debug option for parity control
+    MemNSetBitFieldNb (NBPtr, BFParEn, 1);
+  }
+
+  if (MCTPtr->GangedMode) {
+    MemNSetBitFieldNb (NBPtr, BFWidth128, 1);
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFX4Dimm, DCTPtr->Timings.Dimmx4Present & 0xF);
+
+  if (!MCTPtr->Status[SbRegistered]) {
+    MemNSetBitFieldNb (NBPtr, BFUnBuffDimm, 1);
+  }
+
+  if (MCTPtr->Status[SbEccDimms]) {
+    MemNSetBitFieldNb (NBPtr, BFDimmEccEn, 1);
+  }
+
+  //======================================================================
+  // Build Dram Config Hi Register Value
+  //======================================================================
+  //
+
+  MemNSetBitFieldNb (NBPtr, BFMemClkFreq, MemNGetMemClkFreqIdNb (NBPtr, DCTPtr->Timings.Speed));
+
+  if (MCTPtr->Status[SbRegistered]) {
+    if ((DCTPtr->Timings.Dimmx4Present != 0) && (DCTPtr->Timings.Dimmx8Present != 0)) {
+      MemNSetBitFieldNb (NBPtr, BFRDqsEn, 1);
+    }
+  }
+
+  if (RefPtr->EnableBankSwizzle) {
+    MemNSetBitFieldNb (NBPtr, BFBankSwizzleMode, 1);
+  }
+
+  if (DCTPtr->Timings.DimmQrPresent) {
+    if (UserOptions.CfgMemoryQuadrankType == QUADRANK_UNBUFFERED) {
+      MemNSetBitFieldNb (NBPtr, BFFourRankSoDimm, 1);
+    } else if (UserOptions.CfgMemoryQuadrankType == QUADRANK_REGISTERED) {
+      MemNSetBitFieldNb (NBPtr, BFFourRankRDimm, 1);
+    }
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFDcqBypassMax, 0xF);
+  MemNSetBitFieldNb (NBPtr, BFDcqArbBypassEn, 1);
+  //======================================================================
+  // Build Dram Config Misc Register Value
+  //======================================================================
+  //
+  if (MCTPtr->Status[SbRegistered]) {
+    if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode)!= 0) {
+      MemNSetBitFieldNb (NBPtr, BFSubMemclkRegDly, 1);
+    }
+  }
+  //======================================================================
+  // Build Dram Config Misc 2 Register Value
+  //======================================================================
+  //
+  //
+  // Ddr3FourSocketCh - Must be the same for both DCTs if either of them have > 2 Dimms
+  //
+  if ((GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID)) > 2) {
+    MemNBrdcstSetNb (NBPtr, BFDdr3FourSocketCh, 1);
+  }
+  //
+  // DTaxTxFifpWrDly
+  //
+  Value32 = MemNGetBitFieldNb (NBPtr, BFRdPtrInit);
+  if ((Value32 >= 2) && (Value32 <= 5)) {
+    MemNSetBitFieldNb (NBPtr, BFDataTxFifoWrDly, (6 - Value32));
+  }
+
+  //
+  // ProgOdtEn
+  //
+  if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode) == 1) {
+    MemNSetBitFieldNb (NBPtr, BFProgOdtEn, 1);
+  } else {
+    MemNSetBitFieldNb (NBPtr, BFProgOdtEn, 0);
+  }
+  //
+  // OdtSwizzle
+  //
+  if ((MemNGetBitFieldNb (NBPtr, BFDdr3Mode) == 0) && (MemNGetBitFieldNb (NBPtr, BFFourRankRDimm) == 0) && (RefPtr->EnablePowerDown)) {
+    PowerDownMode = (UINT8) ((UserOptions.CfgPowerDownMode == POWER_DOWN_MODE_AUTO) ? POWER_DOWN_BY_CHANNEL : UserOptions.CfgPowerDownMode);
+    IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(NBPtr->MemPtr->StdHeader));
+    if (PowerDownMode == 1) {
+      MemNSetBitFieldNb (NBPtr, BFOdtSwizzle, 1);
+    }
+  }
+
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sends an MRS command
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSendMrsCmdC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSwapBitsNb (NBPtr);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d MR%d %04x\n",
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) >> 20) & 0xF,
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) >> 16) & 0xF,
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) & 0xFFFF));
+
+  // 1.Set SendMrsCmd=1
+  MemNSetBitFieldNb (NBPtr, BFSendMrsCmd, 1);
+
+  // 2.Wait for SendMrsCmd=0
+  MemNPollBitFieldNb (NBPtr, BFSendMrsCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This is a general purpose function that executes before DRAM init
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNBeforeDramInitC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct ++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      //Set PllLockTime and DllLockTime to default.
+      MemNSetBitFieldNb (NBPtr, BFPhyPLLLockTime, 0x000007D0);
+      MemNSetBitFieldNb (NBPtr, BFPhyDLLLockTime, 0x00000190);
+      MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Enable DLL Shut down
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNEnDLLShutDownC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  BOOLEAN DllShutDownEn;
+
+  DllShutDownEn = TRUE;
+  IDS_OPTION_HOOK (IDS_DLL_SHUT_DOWN, &DllShutDownEn, &(NBPtr->MemPtr->StdHeader));
+
+  if (DllShutDownEn && NBPtr->IsSupported[SetDllShutDown]) {
+    if ((NBPtr->ChannelPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_D1) != 0) {
+      for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+        MemNSwitchDCTNb (NBPtr, Dct);
+        if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+          MemNSetBitFieldNb (NBPtr, BFPhyPLLLockTime, 0x0000001C);
+          MemNSetBitFieldNb (NBPtr, BFPhyDLLLockTime, 0x0000013D);
+          MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0);
+        }
+      }
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Workaround for erratum 322 and 263
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNBeforePlatformSpecC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  // Errata 263
+  if ((NBPtr->DCTPtr->Timings.Speed == DDR533_FREQUENCY) || (NBPtr->DCTPtr->Timings.Speed == DDR667_FREQUENCY)) {
+    MemNSetBitFieldNb (NBPtr, BFErr263, 0x0800);
+  } else {
+    MemNSetBitFieldNb (NBPtr, BFErr263, 0);
+  }
+
+  // Errata 322
+  // 1.Write 00000000h to F2x[1,0]9C_xD08E000
+  MemNSetBitFieldNb (NBPtr, BFErr322I, 0);
+  // 2.If DRAM Configuration Register[MemClkFreq] (F2x[1,0]94[2:0]) is
+  //    greater than or equal to 011b (DDR-800 and higher),
+  //    then write 00000080h to F2x[1,0]9C_xD02E001,
+  //    else write 00000090h to F2x[1,0]9C_xD02E001.
+  MemNSetBitFieldNb (NBPtr, BFErr322II, (NBPtr->DCTPtr->Timings.Speed >= DDR800_FREQUENCY) ? 0x80 : 0x90);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    Initializes extended MMIO address space
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   OptParam - Optional parameter
+ *
+ *     @return    TRUE
+ */
+BOOLEAN
+MemNInitExtMMIOAddrC32  (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8  Index;
+  UINT32 Value;
+  PCI_ADDR PciAddr;
+
+  if (NBPtr->RefPtr->SysLimit >= _1TB_RJ16) {
+    // Initialize all indices of F1x114_x2 and F1x114_x3.
+    for (Index = 0; Index < 32; Index++) {
+      PciAddr = NBPtr->PciAddr;
+      PciAddr.Address.Function = 1;
+
+      PciAddr.Address.Register = 0x110;
+      Value = 0x20000000 | Index;
+      LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+
+      PciAddr.Address.Register = 0x114;
+      Value = 0;
+      LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+
+      PciAddr.Address.Register = 0x110;
+      Value = 0x30000000 | Index;
+      LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+
+      PciAddr.Address.Register = 0x114;
+      Value = 0;
+      LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+    }
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    Force LvDimm voltage to 1.5V for D0 part
+ *
+ *     @param[in,out]   *NBPtr       - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemMainPtr  - Pointer to MEM_MAIN_DATA_BLOCK
+ *
+ *     @return    TRUE
+ */
+BOOLEAN
+MemNForceLvDimmVoltageC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *MemMainPtr
+  )
+{
+  MEM_PARAMETER_STRUCT *ParameterPtr;
+  MEM_SHARED_DATA *mmSharedPtr;
+
+  mmSharedPtr = ((MEM_MAIN_DATA_BLOCK *) MemMainPtr)->mmSharedPtr;
+  ParameterPtr = ((MEM_MAIN_DATA_BLOCK *) MemMainPtr)->MemPtr->ParameterListPtr;
+
+  if ((NBPtr->ChannelPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_D0) != 0) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\nC32 D0 on socket %d.\n", NBPtr->MCTPtr->SocketId);
+    if (((1 << CONVERT_VDDIO_TO_ENCODED (VOLT1_5)) & mmSharedPtr->VoltageMap) != 0) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\nDimms are 1.5V capable. Adjust voltage to 1.5V.\n");
+      ParameterPtr->DDR3Voltage = VOLT1_5;
+    } else {
+      if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_LVDIMM_VOLT1_5_SUPPORT, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL)) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "\nDimms are not 1.5V capable. Adjust voltage to 1.5V based on customer's choice.\n\n");
+        ParameterPtr->DDR3Voltage = VOLT1_5;
+      } else {
+        IDS_HDT_CONSOLE (MEM_FLOW, "\nDimms are not 1.5V capable. Do not adjust voltage based on customer's choice.\n\n");
+        PutEventLog (AGESA_FATAL, MEM_ERROR_VDDIO_UNSUPPORTED, NBPtr->Node, 0, 0, 0, &(NBPtr->MemPtr->StdHeader));
+        SetMemError (AGESA_FATAL, NBPtr->MCTPtr);
+      }
+    }
+  }
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnflowc32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnflowc32.c
new file mode 100644
index 0000000000..f479ce0211
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnflowc32.c
@@ -0,0 +1,135 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnflowc32.c
+ *
+ * C32 initializer for MCT and DCT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mnc32.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_C32_MNFLOWC32_FILECODE
+/* features */
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledC32[MAX_FF_TYPES];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function initializes the platform specific block
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - AGESA_SUCCESS at least one dorm factor was found
+ *     @return          FALSE - AGESA_UNSUPPORTED - Error indicating that no form factors were found
+ */
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 f;
+  UINT8 ErrUnSuppFFCount;
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_C32; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->ChannelPtr->ChDimmValid != 0) {
+      ErrUnSuppFFCount = 0;
+      for (f = 0; f < MAX_FF_TYPES; f++) {
+        ASSERT (memPlatSpecFFInstalledC32[f] != NULL);
+        if (memPlatSpecFFInstalledC32[f] (NBPtr->MemPtr, NBPtr->ChannelPtr, NBPtr->PsPtr) == AGESA_UNSUPPORTED) {
+          ErrUnSuppFFCount++; //Count the number of AGESA_UNSUPPORTED errors
+        } else {
+          break;
+        }
+      }
+      if (ErrUnSuppFFCount == MAX_FF_TYPES) {
+        return FALSE; // No FF types are supported
+      }
+    }
+  }
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnidendimmc32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnidendimmc32.c
new file mode 100644
index 0000000000..434e30ee21
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnidendimmc32.c
@@ -0,0 +1,140 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnidendimmc32.c
+ *
+ * C32 northbridge constructor for dimm identification translator.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnc32.h"
+#include "mfidendimm.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_C32_MNIDENDIMMC32_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for dimm identification translator
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in,out]   NodeID   - ID of current node to construct
+ *     @return          TRUE     - This is the correct constructor for the targeted node.
+ *     @return          FALSE    - This isn't the correct constructor for the targeted node.
+ */
+
+BOOLEAN
+MemNIdentifyDimmConstructorC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedC32 (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_C32;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_C32;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Ganged = FALSE;
+  InitNBRegTableC32 (NBPtr, NBPtr->NBRegTable);
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldC32;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelC32;
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnmctc32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnmctc32.c
new file mode 100644
index 0000000000..1790a093c1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnmctc32.c
@@ -0,0 +1,214 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnmctc32.c
+ *
+ * Northbridge C32 MCT supporting functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnc32.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_C32_MNMCTC32_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets final values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNFinalizeMctC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  DRAM_PREFETCH_MODE DramPrefetchMode;
+  S_UINT64 SMsr;
+  UINT16 Speed;
+  UINT32 ExtMctCfgLoRegVal;
+
+  MemPtr = NBPtr->MemPtr;
+  DramPrefetchMode = MemPtr->PlatFormConfig->PlatformProfile.AdvancedPerformanceProfile.DramPrefetchMode;
+  Speed = NBPtr->DCTPtr->Timings.Speed;
+  MemNSetBitFieldNb (NBPtr, BFMctCfgHiReg, (!NBPtr->Ganged) ? 0x2CE00F60 : 0x2CE00F40);
+
+  ExtMctCfgLoRegVal = MemNGetBitFieldNb (NBPtr, BFExtMctCfgLoReg);
+  ExtMctCfgLoRegVal |= (NBPtr->Ganged) ? 0x0FC00001 : 0x0FC01001;
+
+  ExtMctCfgLoRegVal &= 0x0FFFFFFF;
+  if (Speed == DDR667_FREQUENCY) {
+    ExtMctCfgLoRegVal |= 0x40000000;
+  } else if (Speed == DDR800_FREQUENCY) {
+    ExtMctCfgLoRegVal |= 0x50000000;
+  } else if (Speed == DDR1066_FREQUENCY) {
+    ExtMctCfgLoRegVal |= 0x60000000;
+  } else if (Speed == DDR1333_FREQUENCY) {
+    ExtMctCfgLoRegVal |= 0x80000000;
+  } else {
+    ExtMctCfgLoRegVal |= 0x90000000;
+  }
+  //
+  // PrefFiveConf, PrefFourConf
+  //
+  ExtMctCfgLoRegVal |= 0x0FC00000;
+  //
+  // EnSplitDctLimits
+  //
+  if (!NBPtr->Ganged) {
+    ExtMctCfgLoRegVal |= 0x00001000;
+  }
+  MemNSetBitFieldNb (NBPtr, BFExtMctCfgLoReg, ExtMctCfgLoRegVal);
+
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_IO || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefIoDis, 1);
+  }
+
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_CPU || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefCpuDis, 1);
+  }
+
+  if (NBPtr->Node == BSP_DIE) {
+    if (!NBPtr->ClToNbFlag) {
+      LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+      SMsr.lo &= ~((UINT32)1 << 15);                // ClLinesToNbDis
+      LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    }
+
+    LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    SMsr.hi &= ~((UINT32)1 << (48 - 32));               // WbEnhWsbDis
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  }
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets initial values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNInitializeMctC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+  if (NBPtr->Node == BSP_DIE) {
+    LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    if (SMsr.lo & ((UINT32)1 << 15)) {
+      NBPtr->ClToNbFlag = 1;
+    }
+    SMsr.lo |= (UINT32)1 << 15;                   // ClLinesToNbDis
+    LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+    LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    SMsr.hi |= (UINT32)1 << (48 - 32);              // WbEnhWsbDis
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnotc32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnotc32.c
new file mode 100644
index 0000000000..c2c0ffbdca
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnotc32.c
@@ -0,0 +1,246 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnotc32.c
+ *
+ * Northbridge Non-SPD timings for C32
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnc32.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_C32_MNOTC32_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemNSetOtherTimingC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+UINT32
+STATIC
+MemNGetODTDelaysC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+*/
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the non-SPD timings
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNOtherTimingC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSwitchDCTNb (NBPtr, 0);
+  if (NBPtr->DCTPtr->Timings.DctDimmValid > 0) {
+    MemNSetOtherTimingC32 (NBPtr);
+    MemNPowerDownCtlNb (NBPtr);
+    MemNEnDLLShutDownC32 (NBPtr);
+  }
+
+  MemNSwitchDCTNb (NBPtr, 1);
+  if ((NBPtr->DCTPtr->Timings.DctDimmValid > 0) && (NBPtr->MCTPtr->GangedMode == FALSE)) {
+    MemNSetOtherTimingC32 (NBPtr);
+    MemNPowerDownCtlNb (NBPtr);
+    MemNEnDLLShutDownC32 (NBPtr);
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the non-SPD timings  in PCI registers
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNSetOtherTimingC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+
+  MemNSetBitFieldNb (NBPtr, BFTrdrd, MemNGetTrdrdNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTwrwr, MemNGetTwrwrNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTwrrd, MemNGetTwrrdNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTrwtTO, MemNGetTrwtTONb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTrwtWB, MemNGetTrwtWBNb (NBPtr));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the ODT delays
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+/*
+UINT32
+STATIC
+MemNGetODTDelaysC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  INT8 Ld;
+  UINT32 ODTDelays;
+  //
+  // On revision D processors, the BIOS must additionally configure the ODT pattern
+  // and the ODT switching delays.
+  //
+  // Program F2x[1, 0]9C_x83 DRAM Phy ODT Assertion Control Register based on Burst length.
+  //     -Read the Burst Length from F2x[1, 0]84[BurstCtrl].
+  //     -Value of 2, BL = 4 else assume BL=8.
+  //     -Initialize ODTDelays based on BL value
+  //     -WrOdtOnDuration [14:12] = BL / 2 + 1
+  //     -WrOdtTrnOnDly [10:8] = 0
+  //     -RdOdtOnDuration [6:4] = BL / 2 + 1
+  //
+  ODTDelays = (MemNGetBitFieldNb (NBPtr, BFBurstCtrl) == 2) ? 0x00003030 : 0x00005050;
+
+  // RdOdtTrnOnDly [3:0] < (CL-CWL) or (CL-CWL - 1)
+  // See BKDG F2x[1, 0]9C_x83 DRAM Phy ODT Assertion Control Register [3:0]
+  Ld = ((INT8)MemNGetBitFieldNb (NBPtr, BFTcl) + 1) - ((INT8)MemNGetBitFieldNb (NBPtr, BFTcwl) + 5);
+  if (Ld < 0) {
+    Ld = 0;
+  }
+  if (Ld > 7) {
+    Ld = 7;
+  }
+  ODTDelays += Ld;
+  return ODTDelays;
+}
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function enables power down mode
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+/*
+VOID
+STATIC
+MemNPowerDownCtlC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_PARAMETER_STRUCT *RefPtr;
+  UINT8 PowerDownMode;
+
+  RefPtr = NBPtr->RefPtr;
+
+  // we can't enable powerdown mode when doing WL
+  if (RefPtr->EnablePowerDown) {
+    MemNSetBitFieldNb (NBPtr, BFPowerDownEn, 1);
+    PowerDownMode = (UINT8) UserOptions.CfgPowerDownMode;
+    IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(NBPtr->MemPtr->StdHeader));
+    if (PowerDownMode) {
+      MemNSetBitFieldNb (NBPtr, BFPowerDownMode, 1);
+    }
+  }
+}
+*/
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnphyc32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnphyc32.c
new file mode 100644
index 0000000000..74317d7ac1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnphyc32.c
@@ -0,0 +1,222 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnphyc32.c
+ *
+ * Northbridge Phy support for C32
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnc32.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_C32_MNPHYC32_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the DDR phy compensation logic
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitPhyCompC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST UINT8 TableCompRiseSlew20x[] = {7, 3, 2, 2};
+  CONST UINT8 TableCompRiseSlew15x[] = {7, 7, 3, 2};
+  CONST UINT8 TableCompFallSlew20x[] = {7, 5, 3, 2};
+  CONST UINT8 TableCompFallSlew15x[] = {7, 7, 5, 3};
+  UINT8 i;
+  UINT8 j;
+  UINT8 CurrDct;
+  CurrDct = NBPtr->Dct;
+  // 1. BIOS disables the phy compensation register by programming F2x9C_x08[DisAutoComp]=1
+  // 2. BIOS waits 5 us for the disabling of the compensation engine to complete.
+  // DisAutoComp will be cleared after Dram init has completed
+  //
+  MemNSwitchDCTNb (NBPtr, 0);
+  MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 1);
+  MemUWait10ns (500, NBPtr->MemPtr);
+  MemNSwitchDCTNb (NBPtr, CurrDct);
+
+  // 3. For each normalized driver strength code read from
+  // F2x[1, 0]9C_x00[AddrCmdDrvStren], program the
+  // corresponding 3 bit predriver code in F2x9C_x0A[D3Cmp1NCal, D3Cmp1PCal].
+  //
+  // 4. For each normalized driver strength code read from
+  // F2x[1, 0]9C_x00[DataDrvStren], program the corresponding
+  // 3 bit predriver code in F2x9C_x0A[D3Cmp0NCal, D3Cmp0PCal, D3Cmp2NCal,
+  // D3Cmp2PCal].
+  //
+  j = (UINT8) MemNGetBitFieldNb (NBPtr, BFAddrCmdDrvStren);
+  i = (UINT8) MemNGetBitFieldNb (NBPtr, BFDataDrvStren);
+
+  MemNSwitchDCTNb (NBPtr, 0);
+  ASSERT (j <= 3);
+  MemNSetBitFieldNb (NBPtr, BFD3Cmp1NCal, TableCompRiseSlew20x[j]);
+  MemNSetBitFieldNb (NBPtr, BFD3Cmp1PCal, TableCompFallSlew20x[j]);
+
+  if ((NBPtr->ChannelPtr->Dimms == 3) &&
+      ((NBPtr->DCTPtr->Timings.Speed == DDR800_FREQUENCY) ||
+       (NBPtr->DCTPtr->Timings.Speed == DDR1066_FREQUENCY))) {
+    //
+    // Special Case for 3 Dimms @ 800MHz or 1066MHz
+    //
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp0NCal, 1);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp0PCal, 1);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp2NCal, 1);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp2PCal, 1);
+  } else {
+    ASSERT (i <= 3);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp0NCal, TableCompRiseSlew15x[i]);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp0PCal, TableCompFallSlew15x[i]);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp2NCal, TableCompRiseSlew15x[i]);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp2PCal, TableCompFallSlew15x[i]);
+  }
+  MemNSwitchDCTNb (NBPtr, CurrDct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This is a general purpose function that executes before DRAM training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNBeforeDQSTrainingC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 ChipSel;
+  UINT32 TestAddrRJ16;
+  UINT32 RealAddr;
+
+  MemTBeginTraining (NBPtr->TechPtr);
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+        if (MemNGetMCTSysAddrNb (NBPtr, ChipSel, &TestAddrRJ16)) {
+
+          RealAddr = MemUSetUpperFSbase (TestAddrRJ16, NBPtr->MemPtr);
+
+          MemUDummyCLRead (RealAddr);
+
+          MemNSetBitFieldNb (NBPtr, BFErr350, 0x8000);
+          MemUWait10ns (60, NBPtr->MemPtr);   // Wait 300ns
+          MemNSetBitFieldNb (NBPtr, BFErr350, 0x0000);
+          MemUWait10ns (400, NBPtr->MemPtr);  // Wait 2us
+          MemUProcIOClFlush (TestAddrRJ16, 1, NBPtr->MemPtr);
+          break;
+        }
+      }
+    }
+    if (NBPtr->IsSupported[CheckEccDLLPwrDnConfig]) {
+      if (!NBPtr->MCTPtr->Status[SbEccDimms]) {
+        MemNSetBitFieldNb (NBPtr, BFEccDLLPwrDnConf, 0x0010);
+      }
+      if (NBPtr->DCTPtr->Timings.Dimmx4Present == 0) {
+        MemNSetBitFieldNb (NBPtr, BFEccDLLConf, 0x0080);
+      }
+    }
+  }
+
+  MemTEndTraining (NBPtr->TechPtr);
+
+  MemNSetBitFieldNb (NBPtr, BFDisDatMsk, 1);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnprotoc32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnprotoc32.c
new file mode 100644
index 0000000000..f9f49d09ef
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnprotoc32.c
@@ -0,0 +1,66 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnprotoc32.c
+ *
+ * Northbridge support functions for Errata and early samples
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+
+#include "AGESA.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_C32_MNPROTOC32_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnregc32.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnregc32.c
new file mode 100644
index 0000000000..90baa82c00
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/C32/mnregc32.c
@@ -0,0 +1,636 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnregc32.c
+ *
+ * Common Northbridge register related functions for C32
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/C32)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnc32.h"
+#include "merrhdl.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_C32_MNREGC32_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemNIsIdSupportedC32
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ *     @return          TRUE -  This node is a C32.
+ *     @return          FALSE - This node is not a C32.
+ *
+ */
+BOOLEAN
+MemNIsIdSupportedC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+  if (((LogicalIdPtr->Family & AMD_FAMILY_10_C32) != 0) && ((LogicalIdPtr->Revision & AMD_F10_C32_ALL) != 0)) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *      This function calculates the memory channel index relative to the
+ *      socket, taking the Die number, the Dct, and the channel.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Dct
+ *     @param[in] Channel
+ *
+ */
+UINT8
+MemNGetSocketRelativeChannelC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct,
+  IN       UINT8 Channel
+  )
+{
+  return ((NBPtr->MCTPtr->DieId * MAX_DCTS_PER_NODE_C32) + Dct);
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Bit Field to be programmed
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+MemNCmnGetSetFieldC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  TSEFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT8 IsLinked;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+
+  Value = 0;
+  if ((FieldName < BFEndOfList) && (FieldName >= 0)) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = (UINT8) TSEFO_TYPE (Address);
+      IsLinked = (UINT8) TSEFO_LINKED (Address);
+
+      // If Fn2 and DCT1 selected, set Address to be 1xx
+      if ((Type == NB_ACCESS) && ((Address & 0xF000) == 0x2000) && NBPtr->Dct) {
+        if (!NBPtr->Ganged || (Address & 0xFF) == 0x98 || (Address & 0xFF) == 0x9C) {
+          Address |= 0x0100;
+        }
+      }
+
+      ASSERT ((Address & ((UINT32) 1) << 28) == 0);   // Phy direct access method is not supported
+
+      if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) {
+        // Special DCT Phy access
+        Address &= 0x0FFFFFFF;
+        Lowbit = 0;
+        Highbit = 16;
+        IsLinked = 0;
+      } else {
+        // Normal DCT Phy access
+        Address = TSEFO_OFFSET (Address);
+      }
+
+      if (Type == NB_ACCESS) {
+        PciAddr.AddressValue = Address;
+        PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+        PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+        PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+        Address = PciAddr.AddressValue;
+        LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+        if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) &&
+            (FieldName != BFDctExtraDataReg) && (FieldName != BFDctExtraOffsetReg)) {
+          IDS_HDT_CONSOLE (MEM_GETREG, "~Fn%d_%03x = %x\n", (Address >> 12) & 0xF, Address & 0xFFF, Value);
+        }
+      } else if (Type == DCT_PHY_ACCESS) {
+        MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+        MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+        Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+        IDS_HDT_CONSOLE (MEM_GETREG, "~Fn2_%d9C_%x = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Value);
+      } else if (Type == DCT_EXTRA) {
+        MemNSetBitFieldNb (NBPtr, BFDctExtraOffsetReg, Address);
+        MemNPollBitFieldNb (NBPtr, BFDctExtraAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+        Value = MemNGetBitFieldNb (NBPtr, BFDctExtraDataReg);
+        IDS_HDT_CONSOLE (MEM_GETREG, "~Fn2_%dF4_%x = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Value);
+      } else {
+        IDS_ERROR_TRAP;
+      }
+
+      if (IsSet) {
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        } else {
+          Mask = (UINT32)0xFFFFFFFF;
+        }
+        Value &= ~(Mask << Lowbit);
+        Value |= (Field & Mask) << Lowbit;
+
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+          if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) &&
+              (FieldName != BFDctExtraDataReg) && (FieldName != BFDctExtraOffsetReg)) {
+            IDS_HDT_CONSOLE (MEM_GETREG, "~Fn%d_%03x [%d:%d] = %x\n", (Address >> 12) & 0xF, Address & 0xFFF, Highbit, Lowbit, Field);
+          }
+        } else if (Type == DCT_PHY_ACCESS) {
+          MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+          MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+          IDS_HDT_CONSOLE (MEM_GETREG, "~Fn2_%d9C_%x [%d:%d] = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Highbit, Lowbit, Field);
+        } else if (Type == DCT_EXTRA) {
+          MemNSetBitFieldNb (NBPtr, BFDctExtraDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+          MemNSetBitFieldNb (NBPtr, BFDctExtraOffsetReg, Address);
+          MemNPollBitFieldNb (NBPtr, BFDctExtraAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+          IDS_HDT_CONSOLE (MEM_GETREG, "~Fn2_%dF4_%x [%d:%d] = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Highbit, Lowbit, Field);
+        } else {
+          IDS_ERROR_TRAP;
+        }
+        if (IsLinked) {
+          MemNCmnGetSetFieldC32 (NBPtr, 1, FieldName + 1, Field >> (Highbit - Lowbit + 1));
+        }
+      } else {
+        Value = Value >> Lowbit;  // Shift
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        }
+        if (IsLinked) {
+          Value |= MemNCmnGetSetFieldC32 (NBPtr, 0, FieldName + 1, 0) << (Highbit - Lowbit + 1);
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes bit field translation table
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   NBRegTable[]  - Pointer to the bit field data structure
+ *
+ */
+
+VOID
+InitNBRegTableC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   TSEFO NBRegTable[]
+  )
+{
+  UINT16 i;
+
+  // Allocate heap for NB register table
+  if (!MemNAllocateNBRegTableNb (NBPtr, NbRegTabC32)) {
+    return;     // escape if fails
+  }
+  NBRegTable = NBPtr->NBRegTable;
+
+  for (i = 0; i < BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31,  0, BFDevVendorIDReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  2,  0, BFNodeID);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  6,  4, BFNodeCnt);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x48), 31, 0, BFDramBaseReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x4C), 31, 0, BFDramLimitReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x50), 31, 0, BFDramBaseReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x54), 31, 0, BFDramLimitReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x58), 31, 0, BFDramBaseReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x5C), 31, 0, BFDramLimitReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x60), 31, 0, BFDramBaseReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x64), 31, 0, BFDramLimitReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x68), 31, 0, BFDramBaseReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x6C), 31, 0, BFDramLimitReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x70), 31, 0, BFDramBaseReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x74), 31, 0, BFDramLimitReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x78), 31, 0, BFDramBaseReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x7C), 31, 0, BFDramLimitReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 0, BFDramHoleAddrReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x140), 7, 0, BFDramBaseHiReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x144), 7, 0, BFDramLimitHiReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x148), 7, 0, BFDramBaseHiReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x14C), 7, 0, BFDramLimitHiReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x150), 7, 0, BFDramBaseHiReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x154), 7, 0, BFDramLimitHiReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x158), 7, 0, BFDramBaseHiReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x15C), 7, 0, BFDramLimitHiReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x160), 7, 0, BFDramBaseHiReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x164), 7, 0, BFDramLimitHiReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x168), 7, 0, BFDramBaseHiReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x16C), 7, 0, BFDramLimitHiReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x170), 7, 0, BFDramBaseHiReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x174), 7, 0, BFDramLimitHiReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x178), 7, 0, BFDramBaseHiReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x17C), 7, 0, BFDramLimitHiReg7);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 24, BFDramHoleBase);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 15,  7, BFDramHoleOffset);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0),  1,  1, BFDramMemHoistValid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0),  0,  0, BFDramHoleValid);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x120), 20,  0, BFDramBaseAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x120), 23, 21, BFDramIntlvSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x124), 20,  0, BFDramLimitAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x124), 26, 21, BFDramIntlvEn);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31,  0, BFDramControlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31,  0, BFDramMRSReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31,  0, BFDramTimingHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA0), 31,  0, BFDramConfigMiscReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 31,  0, BFDramCtrlMiscReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF0), 31,  0, BFDctExtraOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF4), 31,  0, BFDctExtraDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF0), 31, 31, BFDctExtraAccessDone);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 31,  0, BFMctCfgHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x118), 31,  0, BFMctCfgLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 31,  0, BFExtMctCfgLoReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x40), 31,  0, BFMcaNbCtlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44), 22, 22, BFDramEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44),  2,  2, BFSyncOnUcEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x180), 25, 25, BFEccSymbolSize);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x48), 31,  0, BFMcaNbStatusLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x4C), 31,  0, BFMcaNbStatusHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58),  4,  0, BFDramScrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 12,  8, BFL2Scrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 20, 16, BFDcacheScrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 28, 24, BFL3Scrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C),  0,  0, BFScrubReDirEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C), 31,  0, BFScrubAddrLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x60), 31,  0, BFScrubAddrHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x8C),  4,  4, BFDisDatMsk);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4),  4,  0, BFNbFid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4), 13, 13, BFMTC1eEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xE8), 25, 25, BFL3Capable);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x188), 8,  8, BFReserved00B);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 13,  8, BFNonSPDHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78),  3,  0, BFRdPtrInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78),  9,  8, BFTwrrdHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 11, 10, BFTwrwrHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 13, 12, BFTrdrdHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 16, 16, BFReserved001);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 19, 19, BFEarlyArbEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 24, 24, BFSendPchgAll);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 25, 25, BFSendAutoRefresh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFMrsLevel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  1,  0, BFBurstCtrl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  3,  2, BFDrvImpCtrl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  9,  7, BFDramTerm_DDR3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 13, 13, BFQoff);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 18, 18, BFASR);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 19, 19, BFSRT);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 22, 20, BFTcwl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 23, 23, BFPchgPDModeSel);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  6,  4, BFTwrDDR3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  3,  0, BFTcl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  6,  4, BFTrcd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  9,  7, BFTrp);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 11, 10, BFTrtp);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 15, 12, BFTras);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 20, 16, BFTrc);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 21, 20, BFTwr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 23, 22, BFTrrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31, 24, BFMemClkDis);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 15,  0, BFNonSPD);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  3,  0, BFTrwtWB);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  7,  4, BFTrwtTO);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  9,  8, BFTwtr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 11, 10, BFTwrrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 13, 12, BFTwrwr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 15, 14, BFTrdrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 17, 16, BFTref);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 22, 20, BFTrfc0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 25, 23, BFTrfc1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 28, 26, BFTrfc2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31, 29, BFTrfc3);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  0,  0, BFInitDram);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  1,  1, BFExitSelfRef);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  5,  4, BFDramTerm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  8,  8, BFParEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 10, 10, BFBurstLength32);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 11, 11, BFWidth128);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 15, 12, BFX4Dimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 17, 17, BFEnterSelfRef);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 19, 19, BFDimmEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 21, 21, BFFreqChgInProg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 23, 23, BFForceAutoPchg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 27, 27, BFDisDllShutdownSR);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  2,  0, BFMemClkFreq);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  3,  3, BFMemClkFreqVal);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  8,  8, BFDdr3Mode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  9,  9, BFLegacyBiosMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 12, 12, BFRDqsEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 15, 15, BFPowerDownEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 16, 16, BFPowerDownMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 17, 17, BFFourRankSoDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 19, 19, BFDcqArbBypassEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 18, 18, BFFourRankRDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 20, 20, BFSlowAccessMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 22, 22, BFBankSwizzleMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 27, 24, BFDcqBypassMax);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31, 28, BFFourActWindow);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4),  8,  8, BFODTSEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4), 14, 12, BFCmdThrottleMode);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  2,  2, BFDdr3FourSocketCh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  5,  5, BFSubMemclkRegDly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  6,  6, BFOdtSwizzle);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  7,  7, BFProgOdtEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15,  8, BFCtrlWordCS);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 18, 16, BFDataTxFifoWrDly);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  0,  0, BFDctSelHiRngEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  1,  1, BFDctSelHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  2,  2, BFDctSelIntLvEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  3,  3, BFMemClrInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  4,  4, BFDctGangEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  5,  5, BFDctDatIntLv);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  7,  6, BFDctSelIntLvAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  8,  8, BFDramEnabled);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  9,  9, BFMemClrBusy);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 10, 10, BFMemCleared);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 11, BFDctSelBaseAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 10, BFDctSelBaseOffset);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  1,  0, BFDctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  6,  2, BFMctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 11,  7, BFMctPrefReqLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 13, 13, BFPrefIoDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 28, 28, BFPrefDramTrainMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 30, 30, BFFlushWr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 29, 29, BFFlushWrOnStpGnt);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  1,  0, BFAdapPrefMissRatio);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  3,  2, BFAdapPrefPosStep);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  5,  4, BFAdapPrefNegStep);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 10,  8, BFCohPrefPrbLmt);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 12, 12, BFEnSplitDctLimits);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 24, 22, BFPrefFourConf);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 27, 25, BFPrefFiveConf);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xB0), 31, 0, BFOnLineSpareControl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xE8),  7, 5, BFDdrMaxRate);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00,  9,  8, BFAddrCmdDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 17, 16, BFDataDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  1,  1, BFWrtLvTrMode);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  3,  3, BFPhyFenceTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 13, 13, BFDqsRcvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x53,  8,  0, BFWrtLvErr);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 27, 25, BFD3Cmp2PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 22, 20, BFD3Cmp2NCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 17, 15, BFD3Cmp1PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 12, 10, BFD3Cmp1NCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A,  7,  5, BFD3Cmp0PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A,  2,  0, BFD3Cmp0NCal);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 20, 16, BFPhyFence);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 13, 12, BFCKETri);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 11,  8, BFODTTri);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C,  7,  0, BFChipSelTri);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x602, 31,  0, BFUSPLLCtlAll);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x603, 31,  0, BFDSPLLCtlAll);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x606,  0,  0, BFUSNibbleAlignEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x690,  2,  2, BFChnLinitClkEn);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA,  0x180, 31, 0, BFPhyRODTCSLow);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA,  0x181, 31, 0, BFPhyRODTCSHigh);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA,  0x182, 31, 0, BFPhyWODTCSLow);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA,  0x183, 31, 0, BFPhyWODTCSHigh);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x06, 3, 0, BFTrdrdSD);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x16, 3, 0, BFTwrwrSD);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000, 31, 30, BFTSLinkSelect);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000,  9,  9, BFTS2BitLockEn);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000,  8,  8, BFTS2En);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000,  4,  4, BFTS1En);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000,  1,  1, BFTS0LinkStarEn);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000,  0,  0, BFTS0En);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800002, 15,  0, BFLinkTrainData);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800010, 17, 17, BFRstRxFifoPtrs);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800010, 16, 16, BFRxFifoPtrInit);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800010,  1,  1, BFRstTxFifoPtrs);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800010,  0,  0, BFTxFifoPtrInit);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800012, 31, 24, BFLpbkCount);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800012, 21, 20, BFLpbkMap);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800012, 16, 16, BFSendLpbkMaintCmd);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800012, 15,  0, BFLpbkData);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800014, 20, 16, BFMbRdPtrEn);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800014,  9,  4, BFLnkLpBkLat);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800014,  1,  1, BFLpbkRndTripLatDone);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800014,  0,  0, BFLnkLatTrainEn);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800020,  1,  1, BFDsPhyReset);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800020,  0,  0, BFLinkReset);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D040F30, _NOT_USED_, _NOT_USED_, BFErr263);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D080F0C, _NOT_USED_, _NOT_USED_, BFErr350);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F0013, _NOT_USED_, _NOT_USED_, BFEccDLLConf);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F0830, _NOT_USED_, _NOT_USED_, BFEccDLLPwrDnConf);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D080F11, _NOT_USED_, _NOT_USED_, BFPhy0x0D080F11);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D080F10, _NOT_USED_, _NOT_USED_, BFPhy0x0D080F10);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D088F30, _NOT_USED_, _NOT_USED_, BFPhy0x0D088F30);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D08C030, _NOT_USED_, _NOT_USED_, BFPhy0x0D08C030);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D082F30, _NOT_USED_, _NOT_USED_, BFPhy0x0D082F30);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2030, _NOT_USED_, _NOT_USED_, BFPhyClkConfig0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2130, _NOT_USED_, _NOT_USED_, BFPhyClkConfig1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2230, _NOT_USED_, _NOT_USED_, BFPhyClkConfig2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2330, _NOT_USED_, _NOT_USED_, BFPhyClkConfig3);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D08E000, _NOT_USED_, _NOT_USED_, BFErr322I);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D02E001, _NOT_USED_, _NOT_USED_, BFErr322II);
+
+  LINK_TSEFO (NBRegTable, BFTwrrd, BFTwrrdHi);
+  LINK_TSEFO (NBRegTable, BFTwrwr, BFTwrwrHi);
+  LINK_TSEFO (NBRegTable, BFTrdrd, BFTrdrdHi);
+
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnParTrainDa.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnParTrainDa.c
new file mode 100644
index 0000000000..1511594de4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnParTrainDa.c
@@ -0,0 +1,225 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnParTrainDa.c
+ *
+ * Feature which performs Memory DQS training on each node with each node training
+ * its own memory through code running on a core in the associated processor.
+ * This way memory can be trained in parallel by more than one processor.
+ *
+ * This file contains the Deerhound specific parallel training function.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/HCTRN)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+  *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnda.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "mfParallelTraining.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DA_MNPARTRAINDA_FILECODE
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+BOOLEAN
+STATIC
+MemConstructRemoteNBBlockDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       DIE_STRUCT *MCTPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr
+);
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *       This is the training function which set up the environment for remote
+ * training on the ap and launches the remote routine.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  Launch training on AP successfully.
+ *     @return          FALSE - Fail to launch training on AP.
+ */
+BOOLEAN
+MemFParallelTrainingDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  AMD_CONFIG_PARAMS *StdHeader;
+  DIE_STRUCT *MCTPtr;
+  REMOTE_TRAINING_ENV *EnvPtr;
+  AP_TASK TrainingTask;
+  UINT8 Socket;
+  UINT8 Module;
+  UINT8 APCore;
+  UINT8 p;
+  UINT32 LowCore;
+  UINT32 HighCore;
+  UINT32 BspSocket;
+  UINT32 BspModule;
+  UINT32 BspCore;
+  AGESA_STATUS Status;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  UINT16 MctDataSize;
+  StdHeader = &(NBPtr->MemPtr->StdHeader);
+  MCTPtr = NBPtr->MCTPtr;
+  Socket = MCTPtr->SocketId;
+  Module = MCTPtr->DieId;
+
+  //
+  // Allocate buffer for REMOTE_TRAINING_ENV
+  //
+  MctDataSize = MAX_DCTS_PER_NODE_DA * (
+                  sizeof (DCT_STRUCT) + (
+                    MAX_CHANNELS_PER_DCT_DA * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                  )
+                );
+  AllocHeapParams.RequestedBufferSize = MctDataSize + sizeof (REMOTE_TRAINING_ENV);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, Socket, Module, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+    EnvPtr = (REMOTE_TRAINING_ENV *) AllocHeapParams.BufferPtr;
+    AllocHeapParams.BufferPtr += sizeof (REMOTE_TRAINING_ENV);
+
+    //
+    // Setup Remote training environment
+    //
+    LibAmdMemCopy (&(EnvPtr->StdHeader), StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+    LibAmdMemCopy (&(EnvPtr->DieStruct), MCTPtr, sizeof (DIE_STRUCT), StdHeader);
+    for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+      EnvPtr->GetPlatformCfg[p] = NBPtr->MemPtr->GetPlatformCfg[p];
+    }
+    EnvPtr->ErrorHandling = NBPtr->MemPtr->ErrorHandling;
+    EnvPtr->NBBlockCtor = MemConstructRemoteNBBlockDA;
+    EnvPtr->FeatPtr = NBPtr->FeatPtr;
+    EnvPtr->HoleBase = NBPtr->RefPtr->HoleBase;
+    EnvPtr->BottomIo = NBPtr->RefPtr->BottomIo;
+    EnvPtr->SysLimit = NBPtr->RefPtr->SysLimit;
+    EnvPtr->TableBasedAlterations = NBPtr->RefPtr->TableBasedAlterations;
+    EnvPtr->PlatformMemoryConfiguration = NBPtr->RefPtr->PlatformMemoryConfiguration;
+
+    LibAmdMemCopy (AllocHeapParams.BufferPtr, MCTPtr->DctData, MctDataSize, StdHeader);
+
+    //
+    // Get Socket, Core of the BSP
+    //
+    IdentifyCore (StdHeader, &BspSocket, &BspModule, &BspCore, &Status);
+    EnvPtr->BspSocket = ((UINT8)BspSocket & 0x000000FF);
+    EnvPtr->BspCore = ((UINT8)BspCore & 0x000000FF);
+
+    //
+    // Set up the remote task structure
+    //
+    TrainingTask.DataTransfer.DataPtr = EnvPtr;
+    TrainingTask.DataTransfer.DataSizeInDwords = (UINT16) ((AllocHeapParams.RequestedBufferSize + 3) / 4);
+    TrainingTask.DataTransfer.DataTransferFlags = 0;
+    TrainingTask.ExeFlags = 0;
+    TrainingTask.FuncAddress.PfApTaskI = (PF_AP_TASK_I)MemFParallelTraining;
+
+    //
+    // Get Target AP Core
+    //
+    GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader);
+    APCore = (UINT8) (LowCore & 0x000000FF);
+
+    //
+    // Launch Remote Training
+    //
+    ApUtilRunCodeOnSocketCore (Socket, APCore, &TrainingTask, StdHeader);
+
+    HeapDeallocateBuffer (AllocHeapParams.BufferHandle, StdHeader);
+    return TRUE;
+  } else {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV, NBPtr->Node, 0, 0, 0, StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocated heap space for "REMOTE_TRAINING_ENV"
+    return FALSE;
+  }
+}
+
+BOOLEAN
+STATIC
+MemConstructRemoteNBBlockDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       DIE_STRUCT *MCTPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr
+  )
+{
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+
+  MemNInitNBDataDA (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+  FeatPtr->InitHwRxEn (NBPtr);
+
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  //----------------------------------------------------------------------------
+  // Get TSC rate of the this AP
+  //----------------------------------------------------------------------------
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &NBPtr->MemPtr->StdHeader);
+  FamilySpecificServices->GetTscRate (FamilySpecificServices, &NBPtr->MemPtr->TscRate, &NBPtr->MemPtr->StdHeader);
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnS3da.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnS3da.c
new file mode 100644
index 0000000000..4ab4b8038a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnS3da.c
@@ -0,0 +1,747 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mns3da.c
+ *
+ * DA memory specific function to support S3 resume
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DA)
+ * @e \$Revision: 50673 $ @e \$Date: 2011-04-12 21:18:06 -0600 (Tue, 12 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "mnda.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mnS3da.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_DA_MNS3DA_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  );
+
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstDA (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  );
+
+VOID
+STATIC
+MemNS3SetSpecialPCIRegDA (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+STATIC
+MemNS3ExitSelfRefRegDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+PCI_SPECIAL_CASE PciSpecialCaseFuncDA[] = {
+  {MemNS3GetCSRNb, MemNS3SetCSRNb},
+  {MemNS3GetCSRNb, MemNS3SetSpecialPCIRegDA},
+  {MemNS3GetBitFieldNb, MemNS3SetBitFieldNb}
+};
+
+PCI_REG_DESCRIPTOR ROMDATA S3PciPreSelfRefDescriptorDA[] = {
+  {{0, 0, 0}, FUNC_2, 0x110, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x40,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x48,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x50,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x58,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x60,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x68,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x70,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x78,  0xFFFF3F03},
+  {{0, 1, 0}, FUNC_1, 0x140, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x148, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x150, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x158, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x160, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x168, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x170, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x178, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0x44,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x4C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x54,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x5C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x64,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x6C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x74,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x7C,  0xFFFF07FF},
+  {{0, 1, 0}, FUNC_1, 0x144, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x14C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x154, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x15C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x164, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x16C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x174, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x17C, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0xF0,  0xFF00FF83},
+  {{0, 0, 0}, FUNC_1, 0x120, 0x00FFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x124, 0x07FFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x10C, 0x07F3FBF9},
+  {{0, 0, 0}, FUNC_2, 0x114, 0xFFFFFC00},
+  {{0, 0, 0}, FUNC_2, 0x118, 0xF773FFFF},
+  {{0, 0, 0}, FUNC_2, 0x11C, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x1B0, 0xFFD3FF3F}
+};
+
+CONST PCI_REGISTER_BLOCK_HEADER ROMDATA S3PciPreSelfRefDA = {
+  0,
+  (sizeof (S3PciPreSelfRefDescriptorDA) / sizeof (PCI_REG_DESCRIPTOR)),
+  S3PciPreSelfRefDescriptorDA,
+  NULL
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPreSelfDescriptorDA[] = {
+   // DCT 0
+  {{0, 0, 0}, FUNC_2, 0x40,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x44,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x48,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x4C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x50,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x54,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x58,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x5C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x60,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x64,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x68,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x6C,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x78,  0xFFCDBF0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x7C,  0xFFF7FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x80,  0x0000FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x84,  0x07FFEFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x88,  0xFFFFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x8C,  0xFFFF7FFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x90,  0x00FFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0xA8,  0x0007FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),  0x30333333, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0x3FFFFFFF, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),  0x001FBFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),  0x003F3F3F, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig0, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig1, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig2, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig3, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  //errata 322
+  {{2, 2, 1}, DCT0,   BFErr322I, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFErr322II, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  //errata 263
+  {{2, 2, 1}, DCT0,   BFErr263, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  // Dll regulator disable
+  {{2, 2, 1}, DCT0,   BFPhy0x0D040F3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D042F3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D048F3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D04DF3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+
+   // DCT 1
+  {{0, 0, 0}, FUNC_2, 0x140, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x144, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x148, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x14C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x150, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x154, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x158, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x15C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x160, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x164, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x168, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x16C, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x178, 0xFFCDBF0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x17C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x180, 0x0000FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x184, 0x07FFEFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x188, 0xFFFFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x18C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x190, 0x00FFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x1A8, 0x0007FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00), 0x30333333, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C), 0x001FBFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04), 0x003F3F3F, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig0, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig1, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig2, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig3, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 322
+  {{2, 2, 1}, DCT1,   BFErr322I, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFErr322II, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 263
+  {{2, 2, 1}, DCT1,   BFErr263, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Dll regulator disable
+  {{2, 2, 1}, DCT1,   BFPhy0x0D040F3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D042F3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D048F3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D04DF3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Restore F2x[1,0]94 right before exit self refresh
+  {{0, 0, 0}, FUNC_2, 0x94,  0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x194, 0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK}
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPreSelfRefDA = {
+  0,
+  (sizeof (S3CPciPreSelfDescriptorDA) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPreSelfDescriptorDA,
+  PciSpecialCaseFuncDA
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPostSelfDescriptorDA[] = {
+  // DCT0
+  {{2, 2, 1}, DCT0,   BFEccDLLPwrDnConf, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFEccDLLConf, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x10),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x11),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x12),  0x000001FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x13),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x14),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x15),  0x000001FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x16),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x17),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x18),  0x000001FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x19),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1B),  0x000001FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x20),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x21),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x23),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x24),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x26),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x27),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x29),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x2A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x01),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x02),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x03),  0x0000007F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x101), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x102), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x103), 0x0000007F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x201), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x202), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x203), 0x0000007F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x301), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x302), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x303), 0x0000007F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x05),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x06),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x07),  0x0000003F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x105), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x106), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x107), 0x0000003F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x205), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x206), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x207), 0x0000003F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x305), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x306), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x307), 0x0000003F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0xFFFFFFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0D),  0x23772377, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x30),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x31),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x32),  0x000000FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x33),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x34),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x35),  0x000000FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x36),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x37),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x38),  0x000000FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x39),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3B),  0x000000FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x40),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x41),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x43),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x44),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x46),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x47),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x49),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x4A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D0F0F13, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D0F0830, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D07812F, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyDLLControl, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+
+    // DCT1
+  {{2, 2, 1}, DCT1,   BFEccDLLPwrDnConf, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFEccDLLConf, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x10),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x11),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x12),  0x000001FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x13),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x14),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x15),  0x000001FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x16),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x17),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x18),  0x000001FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x19),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1B),  0x000001FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x20),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x21),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x23),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x24),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x26),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x27),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x29),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x2A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x01),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x02),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x03),  0x0000007F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x101),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x102),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x103),  0x0000007F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x201),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x202),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x203),  0x0000007F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x301),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x302),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x303),  0x0000007F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x05),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x06),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x07),  0x0000003F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x105),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x106),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x107),  0x0000003F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x205),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x206),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x207),  0x0000003F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x305),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x306),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x307),  0x0000003F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0D),  0x23772377, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x30),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x31),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x32),  0x000000FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x33),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x34),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x35),  0x000000FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x36),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x37),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x38),  0x000000FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x39),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3B),  0x000000FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x40),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x41),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x43),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x44),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x46),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x47),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x49),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x4A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D0F0F13, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D0F0830, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D07812F, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyDLLControl, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+
+  // DllShutDown
+  {{2, 2, 1}, DCT0,   BFPhyPLLLockTime, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyDLLLockTime, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT0,   BFDisDllShutdownSR, 0x00000001, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyPLLLockTime, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyDLLLockTime, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT1,   BFDisDllShutdownSR, 0x00000001, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Restore scrubber related registers after restoring training related registers
+  {{0, 0, 0}, FUNC_3, 0x44,  0xFFFFFFFE, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x58,  0x1F1F1F1F, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT0,   BFScrubReDirEn, 0x00000001, ANY_DIMM_MASK, ANY_DIMM_MASK},
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPostSelfRefDA = {
+  0,
+  (sizeof (S3CPciPostSelfDescriptorDA) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPostSelfDescriptorDA,
+  PciSpecialCaseFuncDA
+};
+
+MSR_REG_DESCRIPTOR ROMDATA S3MSRPreSelfRefDescriptorDA[] = {
+  {{0, 0, 0}, 0xC0010010, 0x00000000007F07FF},
+  {{0, 0, 0}, 0xC001001A, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001D, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001F, 0xC047F87FFF527FFF}
+};
+
+CONST MSR_REGISTER_BLOCK_HEADER ROMDATA S3MSRPreSelfRefDA = {
+  0,
+  (sizeof (S3MSRPreSelfRefDescriptorDA) / sizeof (MSR_REG_DESCRIPTOR)),
+  S3MSRPreSelfRefDescriptorDA,
+  NULL
+};
+
+VOID *MemS3RegListDA[] = {
+  (VOID *)&S3PciPreSelfRefDA,
+  NULL,
+  (VOID *)&S3CPciPreSelfRefDA,
+  (VOID *)&S3CPciPostSelfRefDA,
+  (VOID *)&S3MSRPreSelfRefDA,
+  NULL,
+  NULL,
+  NULL
+};
+
+CONST UINT16 ROMDATA SpecialCasePCIRegDA[] = {
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04)
+};
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for S3 resume
+ *
+ *     @param[in,out]   *S3NBPtr   - Pointer to MEM_NB_BLOCK.
+ *     @param[in,out]   *MemPtr  - Pointer to MEM_DATA_STRUCT.
+ *     @param[in]       NodeID   - Node ID of the target node.
+ *
+ *      @return         BOOLEAN
+ *                         TRUE - This is the correct constructor for the targeted node.
+ *                         FALSE - This isn't the correct constructor for the targeted node.
+ */
+BOOLEAN
+MemS3ResumeConstructNBBlockDA (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  INT32 i;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = ((S3_MEM_NB_BLOCK *)S3NBPtr)->NBPtr;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedDA (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  InitNBRegTableDA (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->Ganged = FALSE;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DA;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+
+  for (i = 0; i < EnumSize; i++) {
+    NBPtr->IsSupported[i] = FALSE;
+  }
+
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) memDefTrue;
+  }
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &MemPtr->StdHeader);
+
+  NBPtr->IsSupported[CheckDllSpeedUp] = TRUE;
+  NBPtr->SwitchDCT = MemNSwitchDCTNb;
+  NBPtr->SwitchChannel = MemNSwitchChannelNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDA;
+  NBPtr->MemNIsIdSupportedNb = MemNIsIdSupportedDA;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3ExitSelfRefReg = MemNS3ExitSelfRefRegDA;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConPCIMask = MemNS3GetConPCIMaskNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConMSRMask = (VOID (*) (MEM_NB_BLOCK *, DESCRIPTOR_GROUP *)) memDefRet;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3Resume = MemNS3ResumeNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3RestoreScrub = MemNS3RestoreScrubNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetRegLstPtr = MemNS3GetRegLstPtrDA;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetDeviceRegLst = MemNS3GetDeviceRegLstDA;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3SpecialCaseHeapSize = (sizeof (SpecialCasePCIRegDA) / sizeof (UINT16)) * sizeof (UINT32);
+
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns the register list for each device for DA
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in, out]  *DescriptPtr - Pointer to DESCRIPTOR_GROUP
+ *     @return          UINT16 - size of the device descriptor on the target node.
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  )
+{
+  UINT8 i;
+  UINT16 Size;
+  Size = 0;
+  for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+    DescriptPtr->PCIDevice[i].Type = (UINT8) (DEV_TYPE_PCI_PRE_ESR + i);
+    DescriptPtr->PCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->PCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((PCI_REGISTER_BLOCK_HEADER *) MemS3RegListDA[PCI_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->PCIDevice[i].RegisterListID = PCI_LST_ESR_DA + i;
+      Size += sizeof (PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CPCIDevice[i].Type = (UINT8) (DEV_TYPE_CPCI_PRE_ESR + i);
+    DescriptPtr->CPCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->CPCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CPCI_REGISTER_BLOCK_HEADER *) MemS3RegListDA[CPCI_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->CPCIDevice[i].RegisterListID = CPCI_LST_ESR_DA + i;
+      Size += sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->MSRDevice[i].Type = (UINT8) (DEV_TYPE_MSR_PRE_ESR + i);
+    DescriptPtr->MSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((MSR_REGISTER_BLOCK_HEADER *) MemS3RegListDA[MSR_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->MSRDevice[i].RegisterListID = MSR_LST_ESR_DA + i;
+      Size += sizeof (MSR_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CMSRDevice[i].Type = (UINT8) (DEV_TYPE_CMSR_PRE_ESR + i);
+    DescriptPtr->CMSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CMSR_REGISTER_BLOCK_HEADER *) MemS3RegListDA[CMSR_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->CMSRDevice[i].RegisterListID = CMSR_LST_ESR_DA + i;
+      Size += sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR);
+    }
+  }
+  return Size;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function return the register list according to the register ID.
+ *
+ *     @param[in]   RegisterLstID - value of the Register list ID.
+ *     @param[out]  **RegisterHeader - pointer to the address of the register list.
+ *     @return      none
+ */
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstDA (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  )
+{
+  if (RegisterLstID >= (sizeof (MemS3RegListDA) / sizeof (VOID *))) {
+    ASSERT(FALSE); // RegisterListID exceeded size of Register list
+    return AGESA_FATAL;
+  }
+  if (MemS3RegListDA[RegisterLstID] != NULL) {
+    *RegisterHeader = MemS3RegListDA[RegisterLstID];
+    return AGESA_SUCCESS;
+  }
+  ASSERT(FALSE); // Device register list error
+  return AGESA_FATAL;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in]   *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *      @return         none
+ */
+VOID
+STATIC
+MemNS3SetSpecialPCIRegDA (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (Address.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_DA; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_DA);
+    // Save the value in the heap at appropriate offset based on the index
+    // of the target register in the special case array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegDA) / sizeof (UINT16)); i ++) {
+        if (SpecialCasePCIRegDA[i] == Address.Address.Register) {
+          *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2)) = *(UINT32 *) Value;
+        }
+      }
+    }
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in,out]  *NBPtr - Pointer to the northbridge block.
+ *     @param[in,out]  *StdHeader - Config handle for library and services.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3ExitSelfRefRegDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  PCI_ADDR PciAddr;
+  UINT32 Value;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+  PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+  PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+  PciAddr.Address.Function = 2;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, StdHeader) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (PciAddr.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_DA; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_DA);
+    // Restore the value one by one in the sequence of the special case register array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegDA) / sizeof (UINT16)); i ++) {
+        PciAddr.Address.Register = SpecialCasePCIRegDA[i];
+        Value = *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2));
+        MemNS3SetCSRNb (AccessS3SaveWidth32, PciAddr, &Value, StdHeader);
+      }
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnS3da.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnS3da.h
new file mode 100644
index 0000000000..3283eb472b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnS3da.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnS3da.h
+ *
+ * S3 resume memory related function for DA.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DA)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MNS3DA_H_
+#define _MNS3DA_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+/// ID for register list of DA
+typedef enum {
+  PCI_LST_ESR_DA,   ///< Assign 0x0000 for PCI register list for pre exit self refresh.
+  PCI_LST_DA,       ///< Assign 0x0001 for PCI register list for post exist self refresh.
+  CPCI_LST_ESR_DA,  ///< Assign 0x0002 for conditional PCI register list for pre exit self refresh.
+  CPCI_LST_DA,      ///< Assign 0x0003 for conditional PCI register list for post exit self refresh.
+  MSR_LST_ESR_DA,   ///< Assign 0x0004 for MSR register list for pre exit self refresh.
+  MSR_LST_DA,       ///< Assign 0x0005 for MSR register list for post exit self refresh.
+  CMSR_LST_ESR_DA,  ///< Assign 0x0006 for conditional MSR register list for pre exit self refresh.
+  CMSR_LST_DA,      ///< Assign 0x0007 for conditional MSR register list for post exit self refresh.
+} RegisterListIDDA;
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif //_MNS3DA_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnda.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnda.c
new file mode 100644
index 0000000000..296f1cdf12
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnda.c
@@ -0,0 +1,498 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnda.c
+ *
+ * Common Northbridge functions for DA
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DA)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnda.h"
+#include "mu.h"
+#include "S3.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_NB_DA_MNDA_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define SPLIT_CHANNEL   (UINT32) 0x20000000
+#define CHANNEL_SELECT  (UINT32) 0x10000000
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern PSO_ENTRY DefaultPlatformMemoryConfiguration[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]        *FeatPtr  - Pointer to the MEM_FEAT_BLOCK_NB
+ *     @param[in]        *SharedPtr - Pointer to the MEM_SHARED_DATA
+ *     @param[in]        NodeID  - UINT8 indicating node ID of the NB object.
+ *
+ *     @return     Boolean indicating that this is the correct memory
+ *                 controller type for the node number that was passed in.
+ */
+
+BOOLEAN
+MemConstructNBBlockDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 SpdSocketIndex;
+  UINT8 SpdChannelIndex;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedDA (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->SharedPtr = SharedPtr;
+
+  MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->MCTPtr->NodeId = NodeID;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+  NBPtr->VarMtrrHiMsk = GetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_DA * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_DA * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                                          )
+                                        );
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    return FALSE;
+  }
+
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_DA * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_DA;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_DA * sizeof (CH_DEF_STRUCT);
+  }
+  NBPtr->PSBlock = (MEM_PS_BLOCK *) AllocHeapParams.BufferPtr;
+
+  //
+  // Initialize Socket List
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    MemPtr->SocketList[MCTPtr->SocketId].ChannelPtr[Dct] = &(MCTPtr->DctData[Dct].ChData[0]);
+    MemPtr->SocketList[MCTPtr->SocketId].TimingsPtr[Dct] = &(MCTPtr->DctData[Dct].Timings);
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = Dct;
+  }
+
+  MemNInitNBDataDA (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+  FeatPtr->InitHwRxEn (NBPtr);
+  //
+  // Calculate SPD Offsets per channel and assign pointers to the data.  At this point, we calculate the Node-Dct-Channel
+  // centric offsets and store the pointers to the first DIMM of each channel in the Channel Definition struct for that
+  // channel.  This pointer is then used later to calculate the offsets to be used for each logical dimm once the
+  // dimm types(QR or not) are known. This is done in the Technology block constructor.
+  //
+  // Calculate the SpdSocketIndex separately from the SpdChannelIndex.
+  // This will facilitate modifications due to some processors that might
+  // map the DCT-CHANNEL differently.
+  //
+  SpdSocketIndex = GetSpdSocketIndex (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, &MemPtr->StdHeader);
+  //
+  // Traverse the Dct/Channel structures
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_DA; Channel++) {
+      //
+      // Calculate the number of Dimms on this channel using the
+      //   die/dct/channel to Socket/channel conversion.
+      //
+      SpdChannelIndex = GetSpdChannelIndex (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                            NBPtr->MCTPtr->SocketId,
+                                            MemNGetSocketRelativeChannelNb (NBPtr, Dct, Channel),
+                                            &MemPtr->StdHeader);
+      NBPtr->MCTPtr->DctData[Dct].ChData[Channel].SpdPtr = &(MemPtr->SpdDataStructure[SpdSocketIndex + SpdChannelIndex]);
+    }
+  }
+
+  MemNSwitchDCTNb (NBPtr, 0);
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes member functions and variables of NB block.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitNBDataDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  INT32 i;
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+  NBPtr->PsPtr = NBPtr->PSBlock;
+
+  InitNBRegTableDA (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  NBPtr->ChannelCount = MAX_CHANNELS_PER_DCT_DA;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DA;
+  NBPtr->Ganged = FALSE;
+  NBPtr->PosTrnPattern = POS_PATTERN_72B;
+  NBPtr->MemCleared = FALSE;
+  NBPtr->StartupSpeed = DDR800_FREQUENCY;
+  NBPtr->RcvrEnDlyLimit = 0xFF;
+  NBPtr->DefDctSelIntLvAddr = 3;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+
+  for (i = 0; i < EnumSize; i++) {
+    NBPtr->IsSupported[i] = FALSE;
+  }
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+
+  NBPtr->SetMaxLatency = MemNSetMaxLatencyNb;
+  NBPtr->getMaxLatParams = MemNGetMaxLatParamsNb;
+  NBPtr->GetSysAddr = MemNGetMCTSysAddrNb;
+  NBPtr->InitializeMCT = MemNInitializeMctDA;
+  NBPtr->FinalizeMCT = MemNFinalizeMctDA;
+  NBPtr->SendMrsCmd = MemNSendMrsCmdDA;
+  NBPtr->sendZQCmd = MemNSendZQCmdNb;
+  NBPtr->WritePattern = MemNWritePatternDA;
+  NBPtr->ReadPattern = MemNReadPatternDA;
+  NBPtr->GenHwRcvEnReads = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+  NBPtr->CompareTestPattern = MemNCompareTestPatternNb;
+  NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternNb;
+  NBPtr->StitchMemory = MemNStitchMemoryNb;
+  NBPtr->AutoConfig = memNAutoConfigDA;
+  NBPtr->PlatformSpec = MemNPlatformSpecNb;
+  NBPtr->InitMCT = MemNInitMCTNb;
+  NBPtr->DisableDCT = MemNDisableDCTNb;
+  NBPtr->StartupDCT = MemNStartupDCTNb;
+  NBPtr->SyncTargetSpeed = MemNSyncTargetSpeedNb;
+  NBPtr->ChangeFrequency = MemNChangeFrequencyNb;
+  NBPtr->RampUpFrequency = MemNRampUpFrequencyNb;
+  NBPtr->ChangeNbFrequency = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefFalse;
+  NBPtr->ProgramCycTimings = MemNProgramCycTimingsNb;
+  NBPtr->SyncDctsReady = MemNSyncDctsReadyNb;
+  NBPtr->HtMemMapInit = MemNHtMemMapInitNb;
+  NBPtr->SyncAddrMapToAllNodes = MemNSyncAddrMapToAllNodesNb;
+  NBPtr->CpuMemTyping = MemNCPUMemTypingNb;
+  NBPtr->BeforeDqsTraining = MemNBeforeDQSTrainingNb;
+  NBPtr->AfterDqsTraining = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+  NBPtr->OtherTiming = MemNOtherTimingDA;
+  NBPtr->UMAMemTyping = MemNUMAMemTypingNb;
+  NBPtr->TechBlockSwitch = MemNTechBlockSwitchNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDA;
+  NBPtr->SetEccSymbolSize = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+  NBPtr->TrainingFlow = MemNTrainingFlowNb;
+  NBPtr->MinDataEyeWidth = MemNMinDataEyeWidthNb;
+  MemNInitNBDataNb (NBPtr);
+  NBPtr->PollBitField = MemNPollBitFieldNb;
+  NBPtr->BrdcstCheck = MemNBrdcstCheckNb;
+  NBPtr->BrdcstSet = MemNBrdcstSetNb;
+  NBPtr->GetTrainDly = MemNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemNSetTrainDlyNb;
+  NBPtr->PhyFenceTraining = MemNPhyFenceTrainingNb;
+  NBPtr->GetSysAddr = MemNGetMCTSysAddrNb;
+  NBPtr->RankEnabled = MemNRankEnabledNb;
+  NBPtr->MemPPhyFenceTrainingNb = MemNTrainPhyFenceNb;
+  NBPtr->MemNPlatformSpecificFormFactorInitNb = MemNPlatformSpecificFormFactorInitDA;
+  NBPtr->MemNBeforePlatformSpecNb = MemNBeforePlatformSpecDA;
+  NBPtr->MemNcmnGetSetTrainDly = MemNcmnGetSetTrainDlyNb;
+  NBPtr->MemPNodeMemBoundaryNb = MemPNodeMemBoundaryDA;
+  NBPtr->MemNInitPhyComp = MemNInitPhyCompNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelNb;
+  NBPtr->MemNBeforeDramInitNb = MemNBeforeDramInitDA;
+  NBPtr->MemNPFenceAdjustNb = (VOID (*) (MEM_NB_BLOCK *, INT16 *)) memDefRet;
+  NBPtr->GetTrainDlyParms = MemNGetTrainDlyParmsNb;
+  NBPtr->TrainingPatternInit = MemNTrainingPatternInitNb;
+  NBPtr->TrainingPatternFinalize = MemNTrainingPatternFinalizeNb;
+  NBPtr->GetApproximateWriteDatDelay = MemNGetApproximateWriteDatDelayNb;
+  NBPtr->CSPerChannel = MemNCSPerChannelNb;
+  NBPtr->CSPerDelay = MemNCSPerDelayNb;
+  NBPtr->FlushPattern = MemNFlushPatternNb;
+  NBPtr->MemNCapSpeedBatteryLife = MemNCapSpeedBatteryLifeDA;
+  NBPtr->GetUmaSize = MemNGetUmaSizeNb;
+  NBPtr->GetMemClkFreqId = MemNGetMemClkFreqIdNb;
+  NBPtr->EnableSwapIntlvRgn = MemNEnableSwapIntlvRgnNb;
+  NBPtr->WaitXMemClks = MemNWaitXMemClksNb;
+  NBPtr->MemNGetDramTerm = MemNGetDramTermNb;
+  NBPtr->MemNGetDynDramTerm = MemNGetDynDramTermNb;
+  NBPtr->MemNGetMR0CL = MemNGetMR0CLNb;
+  NBPtr->MemNGetMR0WR = MemNGetMR0WRNb;
+  NBPtr->MemNSaveMR0 = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+  NBPtr->MemNGetMR2CWL = MemNGetMR2CWLNb;
+  NBPtr->AllocateC6Storage = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+
+  NBPtr->IsSupported[SetSpareEn] = TRUE;
+  NBPtr->IsSupported[CheckSpareEn] = TRUE;
+  NBPtr->IsSupported[SetDllShutDown] = TRUE;
+  NBPtr->IsSupported[DimmBasedOnSpeed] = TRUE;
+  NBPtr->IsSupported[CheckMaxDramRate] = TRUE;
+  NBPtr->IsSupported[Check1GAlign] = TRUE;
+  NBPtr->IsSupported[CheckMaxRdDqsDlyPtr] = TRUE;
+  NBPtr->IsSupported[CheckPhyFenceTraining] = TRUE;
+  NBPtr->IsSupported[CheckGetMCTSysAddr] = TRUE;
+  NBPtr->IsSupported[CheckFindPSDct] = TRUE;
+  NBPtr->IsSupported[CheckDllStdBy] = TRUE;
+  NBPtr->IsSupported[CheckSlewWithMarginImprv] = TRUE;
+  NBPtr->IsSupported[CheckDllSpeedUp] = TRUE;
+  NBPtr->IsSupported[CheckDllRegDis] = TRUE;
+  NBPtr->IsSupported[ForceEnMemHoleRemapping] = TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the default values in the MEM_DATA_STRUCT
+ *
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+VOID
+MemNInitDefaultsDA (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT8 Socket;
+  UINT8 Channel;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  ASSERT (MemPtr != NULL);
+  RefPtr = MemPtr->ParameterListPtr;
+
+  // Memory Map/Mgt.
+  // Mask Bottom IO with 0xF8 to force hole size to have granularity of 128MB
+  RefPtr->BottomIo = 0xE0;
+  RefPtr->UmaMode = UserOptions.CfgUmaMode;
+  RefPtr->UmaSize = UserOptions.CfgUmaSize;
+  RefPtr->MemHoleRemapping = TRUE;
+  RefPtr->LimitMemoryToBelow1Tb = UserOptions.CfgLimitMemoryToBelow1Tb;
+
+  // Dram Timing
+  RefPtr->UserTimingMode = UserOptions.CfgTimingModeSelect;
+  RefPtr->MemClockValue = UserOptions.CfgMemoryClockSelect;
+  for (Socket = 0; Socket < MAX_SOCKETS_SUPPORTED; Socket++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_SOCKET; Channel++) {
+      MemPtr->SocketList[Socket].ChannelPtr[Channel] = NULL;
+      MemPtr->SocketList[Socket].TimingsPtr[Channel] = NULL;
+    }
+  }
+
+  // Memory Clear
+  RefPtr->EnableMemClr = TRUE;
+
+  // TableBasedAlterations
+  RefPtr->TableBasedAlterations = NULL;
+
+  // Platform config table
+  RefPtr->PlatformMemoryConfiguration = DefaultPlatformMemoryConfiguration;
+
+  // Memory Restore
+  RefPtr->MemRestoreCtl = FALSE;
+  RefPtr->SaveMemContextCtl = FALSE;
+  AmdS3ParamsInitializer (&RefPtr->MemContext);
+
+  // Dram Configuration
+  RefPtr->EnableBankIntlv = UserOptions.CfgMemoryEnableBankInterleaving;
+  RefPtr->EnableNodeIntlv = UserOptions.CfgMemoryEnableNodeInterleaving;
+  RefPtr->EnableChannelIntlv = UserOptions.CfgMemoryChannelInterleaving;
+  RefPtr->EnableBankSwizzle = UserOptions.CfgBankSwizzle;
+  RefPtr->EnableParity = UserOptions.CfgMemoryParityEnable;
+  RefPtr->EnableOnLineSpareCtl = UserOptions.CfgOnlineSpare;
+
+  // Dram Power
+  RefPtr->EnablePowerDown = UserOptions.CfgMemoryPowerDown;
+
+  // ECC
+  RefPtr->EnableEccFeature = UserOptions.CfgEnableEccFeature;
+
+  // Vref
+  RefPtr->ExternalVrefCtl = UserOptions.CfgExternalVrefCtlFeature;
+
+  //Training Mode
+  RefPtr->ForceTrainMode = UserOptions.CfgForceTrainMode;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function writes training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Pattern[] - Pattern to write
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNWritePatternDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUWriteCachelines (Address, Pattern, ClCount);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function reads training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Buffer[] - Buffer to fill
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNReadPatternDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUReadCachelines (Buffer, Address, ClCount);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates DQS training for Server NB
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+memNEnableTrainSequenceDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN Retval;
+  Retval = TRUE;
+  if (!MemNIsIdSupportedDA (NBPtr, &(NBPtr->MemPtr->DiesPerSystem[NBPtr->MCTPtr->NodeId].LogicalCpuid))) {
+    Retval = FALSE;
+  }
+  return Retval;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnda.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnda.h
new file mode 100644
index 0000000000..ded80bef12
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnda.h
@@ -0,0 +1,209 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnda.h
+ *
+ * Northbridge DA
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MNDA_H_
+#define _MNDA_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_CHANNELS_PER_SOCKET_DA    2
+#define MAX_DCTS_PER_NODE_DA          2
+#define MAX_CHANNELS_PER_DCT_DA       1
+#define MAX_NODES_SUPPORTED_DA        8
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemConstructNBBlockDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemNInitNBDataDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitDefaultsDA (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+BOOLEAN
+MemNInitializeMctDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNFinalizeMctDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNSendMrsCmdDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+memNAutoConfigDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNOtherTimingDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNWritePatternDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemNReadPatternDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemPNodeMemBoundaryDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   UINT32 *NodeSysLimit
+  );
+
+VOID
+InitNBRegTableDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   TSEFO NBRegTable[]
+  );
+
+VOID
+MemNBeforeDramInitDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNBeforePlatformSpecDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNIsIdSupportedDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+BOOLEAN
+MemNChangeAvgValue3DA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNChangeAvgValue8DA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNEnDLLShutDownDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemNCmnGetSetFieldDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+VOID
+MemNCapSpeedBatteryLifeDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+memNEnableTrainSequenceDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitNi (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+#endif  /* _MNDA_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mndctda.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mndctda.c
new file mode 100644
index 0000000000..5f267435b9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mndctda.c
@@ -0,0 +1,468 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mndctda.c
+ *
+ * Northbridge DA DCT supporting functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DA)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnda.h"
+#include "merrhdl.h"
+#include "cpuRegisters.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuRegisters.h"
+#include "mport.h"
+#include "F10PackageType.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DA_MNDCTDA_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This is a general purpose function that executes before DRAM init
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNBeforeDramInitDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+
+  //Setting the reset value of Phy DLL standby and shutdown registers.
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      //Set PllLockTime and DllLockTime to default.
+      MemNSetBitFieldNb (NBPtr, BFPhyPLLLockTime, 0x000007D0);
+      MemNSetBitFieldNb (NBPtr, BFPhyDLLLockTime, 0x00000190);
+      MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1);
+
+      //Clear PHY PLL Control Register before doing fence training and reset DLL
+      MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F0C, 0x00002000);
+      MemNSetBitFieldNb (NBPtr, BFPhyDLLControl, 0);
+      MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F0C, 0);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function programs the memory controller with configuration parameters
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_FATAL may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ *     @return          NBPtr->MCTPtr->ErrCode - Contains detailed AGESA_STATUS value
+ */
+
+BOOLEAN
+memNAutoConfigDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  //======================================================================
+  // Build Dram Control Register Value (F2x78)
+  //======================================================================
+  //
+
+  MemNSetBitFieldNb (NBPtr, BFEarlyArbEn, 1);
+
+  //======================================================================
+  // Build Dram Config Lo Register Value
+  //======================================================================
+  //
+
+  if (MCTPtr->Status[SbParDimms]) {
+    //
+    // SbParDimms should be set for all DDR3 RDIMMS
+    // Cannot turn off ParEn for DDR3
+    //
+    //@attention - add debug option for parity control
+    MemNSetBitFieldNb (NBPtr, BFParEn, 1);
+  }
+
+
+  if (MCTPtr->GangedMode) {
+    MemNSetBitFieldNb (NBPtr, BFWidth128, 1);
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFX4Dimm, DCTPtr->Timings.Dimmx4Present & 0xF);
+
+  if (!MCTPtr->Status[SbRegistered]) {
+    MemNSetBitFieldNb (NBPtr, BFUnBuffDimm, 1);
+  }
+
+  if (MCTPtr->Status[SbEccDimms]) {
+    MemNSetBitFieldNb (NBPtr, BFDimmEccEn, 1);
+  }
+
+ //======================================================================
+  // Build Dram Config Hi Register Value
+  //======================================================================
+  //
+
+  MemNSetBitFieldNb (NBPtr, BFMemClkFreq, MemNGetMemClkFreqIdNb (NBPtr, DCTPtr->Timings.Speed));
+
+  if (MCTPtr->Status[SbRegistered]) {
+    if (DCTPtr->Timings.Dimmx4Present && DCTPtr->Timings.Dimmx8Present) {
+      MemNSetBitFieldNb (NBPtr, BFRDqsEn, 1);
+    }
+  }
+
+  if (RefPtr->EnableBankSwizzle) {
+    MemNSetBitFieldNb (NBPtr, BFBankSwizzleMode, 1);
+  }
+
+  if (DCTPtr->Timings.DimmQrPresent) {
+    if (UserOptions.CfgMemoryQuadrankType == QUADRANK_UNBUFFERED) {
+      MemNSetBitFieldNb (NBPtr, BFFourRankSoDimm, 1);
+    } else if (UserOptions.CfgMemoryQuadrankType == QUADRANK_REGISTERED) {
+      MemNSetBitFieldNb (NBPtr, BFFourRankRDimm, 1);
+    }
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFDcqBypassMax, 0xF);
+
+  MemNSetBitFieldNb (NBPtr, BFDcqArbBypassEn, 1);
+
+  //======================================================================
+  // Build Dram Config Misc Register Value
+  //======================================================================
+  //
+  MemNSetBitFieldNb (NBPtr, BFOdtSwizzle, 1);
+  // For DDR3 Registered Dimms
+  if (MCTPtr->Status[SbRegistered]) {
+    if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode)!= 0) {
+      MemNSetBitFieldNb (NBPtr, BFSubMemclkRegDly, 1);
+    }
+  }
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sends an MRS command
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSendMrsCmdDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSwapBitsNb (NBPtr);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d MR%d %04x\n",
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) >> 20) & 0xF,
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) >> 16) & 0xF,
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) & 0xFFFF));
+
+  // 1.Set SendMrsCmd=1
+  MemNSetBitFieldNb (NBPtr, BFSendMrsCmd, 1);
+
+  // 2.Wait for SendMrsCmd=0
+  MemNPollBitFieldNb (NBPtr, BFSendMrsCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Workaround for erratum 322 and 263
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNBeforePlatformSpecDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  // Errata 263
+  if ((NBPtr->DCTPtr->Timings.Speed == DDR533_FREQUENCY) || (NBPtr->DCTPtr->Timings.Speed == DDR667_FREQUENCY)) {
+    MemNSetBitFieldNb (NBPtr, BFErr263, 0x0800);
+  } else {
+    MemNSetBitFieldNb (NBPtr, BFErr263, 0);
+  }
+
+  // Errata 322
+  // 1.Write 00000000h to F2x[1,0]9C_xD08E000
+  MemNSetBitFieldNb (NBPtr, BFErr322I, 0);
+  // 2.If DRAM Configuration Register[MemClkFreq] (F2x[1,0]94[2:0]) is
+  //    greater than or equal to 011b (DDR-800 and higher),
+  //    then write 00000080h to F2x[1,0]9C_xD02E001,
+  //    else write 00000090h to F2x[1,0]9C_xD02E001.
+  MemNSetBitFieldNb (NBPtr, BFErr322II, (NBPtr->DCTPtr->Timings.Speed >= DDR800_FREQUENCY) ? 0x80 : 0x90);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Change Average Value of 3
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+BOOLEAN
+MemNChangeAvgValue3DA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if ((NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_C0) != 0) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/**
+ *
+ *
+ *   Change Average Value of 8
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+BOOLEAN
+MemNChangeAvgValue8DA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if ((NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_C1) != 0) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Enable DLL Shut down
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNEnDLLShutDownDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  BOOLEAN DllShutDownEn;
+
+  DllShutDownEn = TRUE;
+  IDS_OPTION_HOOK (IDS_DLL_SHUT_DOWN, &DllShutDownEn, &(NBPtr->MemPtr->StdHeader));
+
+  if (DllShutDownEn && NBPtr->IsSupported[SetDllShutDown]) {
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        MemNSetBitFieldNb (NBPtr, BFPhyPLLLockTime, 0x0000001C);
+        MemNSetBitFieldNb (NBPtr, BFPhyDLLLockTime, 0x0000013D);
+        MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0);
+      }
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function caps speed based on batter life check.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNCapSpeedBatteryLifeDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST UINT16 SupportedFreq[] = {
+    DDR1600_FREQUENCY,
+    DDR1333_FREQUENCY,
+    DDR1066_FREQUENCY,
+    DDR800_FREQUENCY,
+    DDR667_FREQUENCY,
+    DDR533_FREQUENCY,
+    DDR400_FREQUENCY
+  };
+  UINT32 NBFreq;
+  UINT8 j;
+  UINT16 DdrFreq;
+  CPU_SPECIFIC_SERVICES   *FamilySpecificServices;
+  UINT32                  ProcessorPackageType;
+
+  FamilySpecificServices = NULL;
+  DdrFreq = DDR800_FREQUENCY; // Set Default to be 400Mhz
+  ProcessorPackageType = LibAmdGetPackageType (&(NBPtr->MemPtr->StdHeader));
+  GetCpuServicesOfSocket (NBPtr->MCTPtr->SocketId, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &(NBPtr->MemPtr->StdHeader));
+  if (FamilySpecificServices->IsNbPstateEnabled (FamilySpecificServices, NBPtr->MemPtr->PlatFormConfig, &(NBPtr->MemPtr->StdHeader))) {
+    NBFreq = (MemNGetBitFieldNb (NBPtr, BFNbFid) + 4) * 100;  // Calculate the Nb P1 frequency (NbFreq / 2)
+    for (j = 0; j < GET_SIZE_OF (SupportedFreq); j++) {
+      if (NBFreq >= ((UINT32) 2 * SupportedFreq[j])) {
+        // Pick Max MEMCLK that is less than or equal to (NCLK_P1 / 2)
+        DdrFreq = SupportedFreq[j];
+        break;
+      }
+    }
+    if (NBPtr->MemPtr->PlatFormConfig->PlatformProfile.PlatformPowerPolicy == BatteryLife) {
+      if (NBPtr->DCTPtr->Timings.TargetSpeed > DdrFreq) {
+        NBPtr->DCTPtr->Timings.TargetSpeed = DdrFreq;
+      }
+    } else {
+      PutEventLog (AGESA_WARNING, MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      DdrFreq = DDR800_FREQUENCY; // Set Default to be 400Mhz
+      NBFreq = (MemNGetBitFieldNb (NBPtr, BFNbFid) + 4) * 200;  // Calculate the Nb P0 frequency
+      for (j = 0; j < GET_SIZE_OF (SupportedFreq); j++) {
+        if (NBFreq >= ((UINT32) 2 * SupportedFreq[j])) {
+          // Pick Max MEMCLK that is less than or equal to (NCLK_P0 / 2)
+          DdrFreq = SupportedFreq[j];
+          break;
+        }
+      }
+      if (NBPtr->DCTPtr->Timings.TargetSpeed > DdrFreq) {
+        NBPtr->DCTPtr->Timings.TargetSpeed = DdrFreq;
+      }
+    }
+    if (((NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_C3) != 0) && (ProcessorPackageType == PACKAGE_TYPE_S1G3_S1G4 || ProcessorPackageType == PACKAGE_TYPE_ASB2)) {
+      MemNSetBitFieldNb (NBPtr, BFRdPtrInit, 4);
+      MemNSetBitFieldNb (NBPtr, BFDataTxFifoWrDly, 1);
+    } else {
+      MemNSetBitFieldNb (NBPtr, BFRdPtrInit, 6);
+      MemNSetBitFieldNb (NBPtr, BFDataTxFifoWrDly, 0);
+    }
+  } else {
+    NBFreq = (MemNGetBitFieldNb (NBPtr, BFNbFid) + 4) * 200;  // Calculate the Nb P0 frequency
+    for (j = 0; j < GET_SIZE_OF (SupportedFreq); j++) {
+      if (NBFreq >= ((UINT32) 2 * SupportedFreq[j])) {
+        // Pick Max MEMCLK that is less than or equal to (NCLK_P0 / 2)
+        DdrFreq = SupportedFreq[j];
+        break;
+      }
+    }
+    if (NBPtr->DCTPtr->Timings.TargetSpeed > DdrFreq) {
+      NBPtr->DCTPtr->Timings.TargetSpeed = DdrFreq;
+    }
+    MemNSetBitFieldNb (NBPtr, BFRdPtrInit, 6);
+    MemNSetBitFieldNb (NBPtr, BFDataTxFifoWrDly, 0);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnflowda.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnflowda.c
new file mode 100644
index 0000000000..316353344e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnflowda.c
@@ -0,0 +1,139 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnflowda.c
+ *
+ * Deerhound initializer for MCT and DCT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DA)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mnda.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DA_MNFLOWDA_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledDA[MAX_FF_TYPES];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function initializes the platform specific block
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - AGESA_SUCCESS at least one dorm factor was found
+ *     @return          FALSE - AGESA_UNSUPPORTED - Error indicating that no form factors were found
+ */
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 f;
+  UINT8 ErrUnSuppFFCount;
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->ChannelPtr->ChDimmValid != 0) {
+      ErrUnSuppFFCount = 0;
+      for (f = 0; f < MAX_FF_TYPES; f++) {
+        ASSERT (memPlatSpecFFInstalledDA[f] != NULL);
+        if (memPlatSpecFFInstalledDA[f] (NBPtr->MemPtr, NBPtr->ChannelPtr, NBPtr->PsPtr) == AGESA_UNSUPPORTED) {
+          ErrUnSuppFFCount++; //Count the number of AGESA_UNSUPPORTED errors
+        } else {
+          break;
+        }
+      }
+      if (ErrUnSuppFFCount == MAX_FF_TYPES) {
+        return FALSE; // No FF types are supported
+      }
+    }
+  }
+  return TRUE;
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnidendimmda.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnidendimmda.c
new file mode 100644
index 0000000000..97434eda23
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnidendimmda.c
@@ -0,0 +1,140 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnidendimmda.c
+ *
+ * DA northbridge constructor for dimm identification translator.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DA)
+ * @e \$Revision: 45911 $ @e \$Date: 2011-01-24 13:55:11 -0700 (Mon, 24 Jan 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnda.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DA_MNIDENDIMMDA_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for dimm identification translator
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in,out]   NodeID   - ID of current node to construct
+ *     @return          TRUE     - This is the correct constructor for the targeted node.
+ *     @return          FALSE    - This isn't the correct constructor for the targeted node.
+ *
+ */
+
+BOOLEAN
+MemNIdentifyDimmConstructorDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedDA (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DA;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Ganged = FALSE;
+  InitNBRegTableDA (NBPtr, NBPtr->NBRegTable);
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDA;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelNb;
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnmctda.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnmctda.c
new file mode 100644
index 0000000000..c22d2c7fbd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnmctda.c
@@ -0,0 +1,208 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnmctda.c
+ *
+ * Northbridge DA MCT supporting functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DA)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnda.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DA_MNMCTDA_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets final values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNFinalizeMctDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  MEM_DATA_STRUCT *MemPtr;
+  DRAM_PREFETCH_MODE DramPrefetchMode;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+  DramPrefetchMode = MemPtr->PlatFormConfig->PlatformProfile.AdvancedPerformanceProfile.DramPrefetchMode;
+  MemNSetBitFieldNb (NBPtr, BFAdapPrefMissRatio, 1);
+  MemNSetBitFieldNb (NBPtr, BFAdapPrefPosStep, 0);
+  MemNSetBitFieldNb (NBPtr, BFAdapPrefNegStep, 0);
+  MemNSetBitFieldNb (NBPtr, BFCohPrefPrbLmt, 1);
+  // Recommended settings for F2x11C
+  MemNSetBitFieldNb (NBPtr, BFMctWrLimit, 16);
+  MemNSetBitFieldNb (NBPtr, BFPrefCpuDis, 0);
+  MemNSetBitFieldNb (NBPtr, BFPrefIoDis, 0);
+  MemNSetBitFieldNb (NBPtr, BFFlushWrOnStpGnt, 1);
+
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_IO || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefIoDis, 1);
+  }
+
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_CPU || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefCpuDis, 1);
+  }
+  // For power saving
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      if (NBPtr->ChannelPtr->Dimmx4Present == 0) {
+        MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F13, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0F13) | 0x80));
+      }
+      if (!NBPtr->MCTPtr->Status[SbEccDimms]) {
+        MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0830, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0830) | 0x10));
+      }
+      MemNSetBitFieldNb (NBPtr, BFPhy0x0D07812F, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D07812F) | 0x01));
+    }
+  }
+
+  if (NBPtr->Node == BSP_DIE) {
+    if (!NBPtr->ClToNbFlag) {
+      LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+      SMsr.lo &= ~((UINT32)1 << 15);                // ClLinesToNbDis
+      LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    }
+
+    LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    SMsr.hi &= ~((UINT32)1 << (48 - 32));               // WbEnhWsbDis
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  }
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets initial values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNInitializeMctDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+  if (NBPtr->Node == BSP_DIE) {
+    LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    if (SMsr.lo & ((UINT32)1 << 15)) {
+      NBPtr->ClToNbFlag = 1;
+    }
+    SMsr.lo |= (UINT32)1 << 15;                   // ClLinesToNbDis
+    LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+    LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    SMsr.hi |= (UINT32)1 << (48 - 32);              // WbEnhWsbDis
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnotda.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnotda.c
new file mode 100644
index 0000000000..a107cd85b0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnotda.c
@@ -0,0 +1,200 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnotda.c
+ *
+ * Northbridge Non-SPD timings for DA
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DA)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnda.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DA_MNOTDA_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemNSetOtherTimingDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemNPowerDownCtlDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the non-SPD timings
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNOtherTimingDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSwitchDCTNb (NBPtr, 0);
+  if (NBPtr->DCTPtr->Timings.DctDimmValid > 0) {
+    MemNSetOtherTimingDA (NBPtr);        // Set DA Timings
+    MemNPowerDownCtlNb (NBPtr);
+    MemNEnDLLShutDownDA (NBPtr);
+  }
+
+  MemNSwitchDCTNb (NBPtr, 1);
+  if ((NBPtr->DCTPtr->Timings.DctDimmValid > 0) && (NBPtr->MCTPtr->GangedMode == FALSE)) {
+    MemNSetOtherTimingDA (NBPtr);                // Set DA Timings
+    MemNPowerDownCtlNb (NBPtr);
+    MemNEnDLLShutDownDA (NBPtr);
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the non-SPD timings into the PCI registers
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNSetOtherTimingDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSetBitFieldNb (NBPtr, BFTrdrd, MemNGetTrdrdNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTwrwr, MemNGetTwrwrNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTwrrd, MemNGetTwrrdNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTrwtTO, MemNGetTrwtTONb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTrwtWB, MemNGetTrwtWBNb (NBPtr));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function enables power down mode
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNPowerDownCtlDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_PARAMETER_STRUCT *RefPtr;
+  UINT8 PowerDownMode;
+
+  RefPtr = NBPtr->RefPtr;
+
+  // we can't enable powerdown mode when doing WL
+  if (RefPtr->EnablePowerDown) {
+    MemNSetBitFieldNb (NBPtr, BFPowerDownEn, 1);
+    PowerDownMode = (UINT8) UserOptions.CfgPowerDownMode;
+    IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(NBPtr->MemPtr->StdHeader));
+    if (PowerDownMode) {
+      MemNSetBitFieldNb (NBPtr, BFPowerDownMode, 1);
+    }
+  }
+}
+
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnprotoda.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnprotoda.c
new file mode 100644
index 0000000000..19e47f9d3c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnprotoda.c
@@ -0,0 +1,86 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnprotoda.c
+ *
+ * Northbridge support functions for Errata and early samples
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DA)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnda.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DA_MNPROTODA_FILECODE
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function executes Node memory 1GB boundary alignment.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *NodeSysLimit   - Pointer to the NodeSysLimit
+ *
+ */
+
+VOID
+MemPNodeMemBoundaryDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   UINT32 *NodeSysLimit
+  )
+{
+  if (NBPtr->GetBitField (NBPtr, BFDdr3Mode) == 0) {
+    // only apply to DDR2.
+    if (*NodeSysLimit > ((UINT32)1 << (30 - 16))) {
+      // if (NodeSysLimit > 1GB) then set to Node limit to 1GB boundary for each node
+      *NodeSysLimit += 1;
+      *NodeSysLimit &= 0xFFFFC000;
+      *NodeSysLimit -= 1;
+    }
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnregda.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnregda.c
new file mode 100644
index 0000000000..ab7a51ad45
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DA/mnregda.c
@@ -0,0 +1,584 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnregda.c
+ *
+ * Common Northbridge register related functions for DA
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DA)
+ * @e \$Revision: 58718 $ @e \$Date: 2011-09-05 23:23:08 -0600 (Mon, 05 Sep 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnda.h"
+#include "merrhdl.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DA_MNREGDA_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemNIsIdSupportedDA
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ *     @return          TRUE -  This node is a RB.
+ *     @return          FALSE - This node is not a RB.
+ *
+ */
+BOOLEAN
+MemNIsIdSupportedDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+
+  if (((LogicalIdPtr->Family & (AMD_FAMILY_10_BL | AMD_FAMILY_10_DA)) != 0)
+      && ((LogicalIdPtr->Revision & (AMD_F10_BL_ALL | AMD_F10_DA_ALL)) != 0)) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Bit Field to be programmed
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+MemNCmnGetSetFieldDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  TSEFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT8 IsLinked;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+
+  Value = 0;
+  if ((FieldName < BFEndOfList) && (FieldName >= 0)) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = (UINT8) TSEFO_TYPE (Address);
+      IsLinked = (UINT8) TSEFO_LINKED (Address);
+
+      // If Fn2 and DCT1 selected, set Address to be 1xx
+      if ((Type == NB_ACCESS) && ((Address & 0xF000) == 0x2000) && NBPtr->Dct) {
+        if (!NBPtr->Ganged || (Address & 0xFF) == 0x98 || (Address & 0xFF) == 0x9C) {
+          Address |= 0x0100;
+        }
+      }
+
+      ASSERT ((Address & ((UINT32) 1) << 28) == 0);   // Phy direct access method is not supported
+
+      if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) {
+        // Special DCT Phy access
+        Address &= 0x0FFFFFFF;
+        Lowbit = 0;
+        Highbit = 16;
+        IsLinked = 0;
+      } else {
+        // Normal DCT Phy access
+        Address = TSEFO_OFFSET (Address);
+      }
+
+      if (Type == NB_ACCESS) {
+        PciAddr.AddressValue = Address;
+        PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+        PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+        PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+        Address = PciAddr.AddressValue;
+        LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+        if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) &&
+            (FieldName != BFDctExtraDataReg) && (FieldName != BFDctExtraOffsetReg)) {
+          IDS_HDT_CONSOLE (MEM_GETREG, "~Fn%d_%03x = %x\n", (Address >> 12) & 0xF, Address & 0xFFF, Value);
+        }
+      } else if (Type == DCT_PHY_ACCESS) {
+        MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+        MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+        Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+        IDS_HDT_CONSOLE (MEM_GETREG, "~Fn2_%d9C_%x = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Value);
+      } else {
+        IDS_ERROR_TRAP;
+      }
+
+      if (IsSet) {
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        } else {
+          Mask = (UINT32)0xFFFFFFFF;
+        }
+        Value &= ~(Mask << Lowbit);
+        Value |= (Field & Mask) << Lowbit;
+
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+          if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) &&
+              (FieldName != BFDctExtraDataReg) && (FieldName != BFDctExtraOffsetReg)) {
+            IDS_HDT_CONSOLE (MEM_SETREG, "~Fn%d_%03x [%d:%d] = %x\n", (Address >> 12) & 0xF, Address & 0xFFF, Highbit, Lowbit, Field);
+          }
+        } else if (Type == DCT_PHY_ACCESS) {
+          MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+          MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+          IDS_HDT_CONSOLE (MEM_SETREG, "~Fn2_%d9C_%x [%d:%d] = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Highbit, Lowbit, Field);
+        } else {
+          IDS_ERROR_TRAP;
+        }
+        if (IsLinked) {
+          MemNCmnGetSetFieldDA (NBPtr, 1, FieldName + 1, Field >> (Highbit - Lowbit + 1));
+        }
+      } else {
+        Value = Value >> Lowbit;  // Shift
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        }
+        if (IsLinked) {
+          Value |= MemNCmnGetSetFieldDA (NBPtr, 0, FieldName + 1, 0) << (Highbit - Lowbit + 1);
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes bit field translation table
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   NBRegTable[]   - Pointer to the bit field data structure
+ *
+ */
+
+VOID
+InitNBRegTableDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   TSEFO NBRegTable[]
+  )
+{
+  UINT16 i;
+
+  // Allocate heap for NB register table
+  if (!MemNAllocateNBRegTableNb (NBPtr, NbRegTabDA)) {
+    return;     // escape if fails
+  }
+  NBRegTable = NBPtr->NBRegTable;
+
+  for (i = 0; i < BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31,  0, BFDevVendorIDReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  2,  0, BFNodeID);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  6,  4, BFNodeCnt);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x48), 31, 0, BFDramBaseReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x4C), 31, 0, BFDramLimitReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x50), 31, 0, BFDramBaseReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x54), 31, 0, BFDramLimitReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x58), 31, 0, BFDramBaseReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x5C), 31, 0, BFDramLimitReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x60), 31, 0, BFDramBaseReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x64), 31, 0, BFDramLimitReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x68), 31, 0, BFDramBaseReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x6C), 31, 0, BFDramLimitReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x70), 31, 0, BFDramBaseReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x74), 31, 0, BFDramLimitReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x78), 31, 0, BFDramBaseReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x7C), 31, 0, BFDramLimitReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 0, BFDramHoleAddrReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x140), 7, 0, BFDramBaseHiReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x144), 7, 0, BFDramLimitHiReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x148), 7, 0, BFDramBaseHiReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x14C), 7, 0, BFDramLimitHiReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x150), 7, 0, BFDramBaseHiReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x154), 7, 0, BFDramLimitHiReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x158), 7, 0, BFDramBaseHiReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x15C), 7, 0, BFDramLimitHiReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x160), 7, 0, BFDramBaseHiReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x164), 7, 0, BFDramLimitHiReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x168), 7, 0, BFDramBaseHiReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x16C), 7, 0, BFDramLimitHiReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x170), 7, 0, BFDramBaseHiReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x174), 7, 0, BFDramLimitHiReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x178), 7, 0, BFDramBaseHiReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x17C), 7, 0, BFDramLimitHiReg7);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 24, BFDramHoleBase);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 15,  7, BFDramHoleOffset);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0),  1,  1, BFDramMemHoistValid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0),  0,  0, BFDramHoleValid);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x120), 20,  0, BFDramBaseAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x120), 23, 21, BFDramIntlvSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x124), 20,  0, BFDramLimitAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x124), 26, 21, BFDramIntlvEn);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31,  0, BFDramControlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31,  0, BFDramMRSReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31,  0, BFDramTimingHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA0), 31,  0, BFDramConfigMiscReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 31,  0, BFDramCtrlMiscReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF4), 31,  0, BFDctExtraDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 31,  0, BFMctCfgHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x118), 31,  0, BFMctCfgLoReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x40), 31,  0, BFMcaNbCtlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44), 22, 22, BFDramEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44),  2,  2, BFSyncOnUcEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x180), 25, 25, BFEccSymbolSize);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x48), 31,  0, BFMcaNbStatusLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x4C), 31,  0, BFMcaNbStatusHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58),  4,  0, BFDramScrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 12,  8, BFL2Scrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 20, 16, BFDcacheScrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 28, 24, BFL3Scrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C),  0,  0, BFScrubReDirEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C), 31,  0, BFScrubAddrLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x60), 31,  0, BFScrubAddrHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x84), 31, 29, BFC1ClkDivisor);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x8C),  4,  4, BFDisDatMsk);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4),  4,  0, BFNbFid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xE8), 25, 25, BFL3Capable);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x188), 8,  8, BFReserved00B);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 13,  8, BFNonSPDHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78),  3,  0, BFRdPtrInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78),  9,  8, BFTwrrdHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 11, 10, BFTwrwrHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 13, 12, BFTrdrdHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 16, 16, BFReserved001);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 19, 19, BFEarlyArbEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 24, 24, BFSendPchgAll);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 25, 25, BFSendAutoRefresh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFMrsLevel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  1,  0, BFBurstCtrl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  3,  2, BFDrvImpCtrl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  9,  7, BFDramTerm_DDR3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 13, 13, BFQoff);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 18, 18, BFASR);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 19, 19, BFSRT);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 22, 20, BFTcwl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 23, 23, BFPchgPDModeSel);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  6,  4, BFTwrDDR3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  3,  0, BFTcl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  6,  4, BFTrcd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  9,  7, BFTrp);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 11, 10, BFTrtp);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 15, 12, BFTras);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 20, 16, BFTrc);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 21, 20, BFTwr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 23, 22, BFTrrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31, 24, BFMemClkDis);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 15,  0, BFNonSPD);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  3,  0, BFTrwtWB);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  7,  4, BFTrwtTO);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  9,  8, BFTwtr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 11, 10, BFTwrrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 13, 12, BFTwrwr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 15, 14, BFTrdrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 17, 16, BFTref);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 22, 20, BFTrfc0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 25, 23, BFTrfc1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 28, 26, BFTrfc2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31, 29, BFTrfc3);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  0,  0, BFInitDram);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  1,  1, BFExitSelfRef);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  5,  4, BFDramTerm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  8,  8, BFParEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 10, 10, BFBurstLength32);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 11, 11, BFWidth128);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 15, 12, BFX4Dimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 17, 17, BFEnterSelfRef);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 19, 19, BFDimmEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 21, 21, BFFreqChgInProg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 23, 23, BFForceAutoPchg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 27, 27, BFDisDllShutdownSR);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  2,  0, BFMemClkFreq);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  3,  3, BFMemClkFreqVal);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  8,  8, BFDdr3Mode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  9,  9, BFLegacyBiosMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 12, 12, BFRDqsEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 15, 15, BFPowerDownEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 16, 16, BFPowerDownMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 17, 17, BFFourRankSoDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 19, 19, BFDcqArbBypassEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 18, 18, BFFourRankRDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 20, 20, BFSlowAccessMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 22, 22, BFBankSwizzleMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 27, 24, BFDcqBypassMax);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31, 28, BFFourActWindow);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4),  8,  8, BFODTSEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4), 14, 12, BFCmdThrottleMode);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  2,  2, BFDdr3FourSocketCh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  5,  5, BFSubMemclkRegDly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  6,  6, BFOdtSwizzle);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15,  8, BFCtrlWordCS);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 18, 16, BFDataTxFifoWrDly);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x10C),  0,  0, BFIntLvRgnSwapEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x10C),  9,  3, BFIntLvRgnBaseAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x10C),  17, 11, BFIntLvRgnLmtAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x10C),  26, 20, BFIntLvRgnSize);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  0,  0, BFDctSelHiRngEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  1,  1, BFDctSelHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  2,  2, BFDctSelIntLvEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  3,  3, BFMemClrInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  4,  4, BFDctGangEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  5,  5, BFDctDatIntLv);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  7,  6, BFDctSelIntLvAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  8,  8, BFDramEnabled);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  9,  9, BFMemClrBusy);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 10, 10, BFMemCleared);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 11, BFDctSelBaseAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 10, BFDctSelBaseOffset);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  1,  0, BFDctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  6,  2, BFMctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 11,  7, BFMctPrefReqLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 13, 13, BFPrefIoDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 27, 25, BFPrefThreeConf);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 28, 28, BFPrefDramTrainMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 30, 30, BFFlushWr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 29, 29, BFFlushWrOnStpGnt);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  1,  0, BFAdapPrefMissRatio);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  3,  2, BFAdapPrefPosStep);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  5,  4, BFAdapPrefNegStep);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 10,  8, BFCohPrefPrbLmt);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 12, 12, BFEnSplitDctLimits);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 24, 22, BFPrefFourConf);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 27, 25, BFPrefFiveConf);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xB0), 31, 0, BFOnLineSpareControl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xE8),  7, 5, BFDdrMaxRate);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00,  9,  8, BFAddrCmdDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 17, 16, BFDataDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  1,  1, BFWrtLvTrMode);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  3,  3, BFPhyFenceTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 13, 13, BFDqsRcvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x53,  8,  0, BFWrtLvErr);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 27, 25, BFD3Cmp2PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 22, 20, BFD3Cmp2NCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 17, 15, BFD3Cmp1PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 12, 10, BFD3Cmp1NCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A,  7,  5, BFD3Cmp0PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A,  2,  0, BFD3Cmp0NCal);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 20, 16, BFPhyFence);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 13, 12, BFCKETri);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 11,  8, BFODTTri);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C,  7,  0, BFChipSelTri);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D040F30, _NOT_USED_, _NOT_USED_, BFErr263);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D080F0C, _NOT_USED_, _NOT_USED_, BFErr350);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D08E000, _NOT_USED_, _NOT_USED_, BFErr322I);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D02E001, _NOT_USED_, _NOT_USED_, BFErr322II);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0FE006, _NOT_USED_, _NOT_USED_, BFPhyPLLLockTime);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0FE007, _NOT_USED_, _NOT_USED_, BFPhyDLLLockTime);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D, 31,  0, BFPhyDLLControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D080F0C, _NOT_USED_, _NOT_USED_, BFPhy0x0D080F0C);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D080F11, _NOT_USED_, _NOT_USED_, BFPhy0x0D080F11);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D080F10, _NOT_USED_, _NOT_USED_, BFPhy0x0D080F10);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D088F30, _NOT_USED_, _NOT_USED_, BFPhy0x0D088F30);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D08C030, _NOT_USED_, _NOT_USED_, BFPhy0x0D08C030);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D082F30, _NOT_USED_, _NOT_USED_, BFPhy0x0D082F30);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D040F3E, _NOT_USED_, _NOT_USED_, BFPhy0x0D040F3E);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D042F3E, _NOT_USED_, _NOT_USED_, BFPhy0x0D042F3E);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D048F3E, _NOT_USED_, _NOT_USED_, BFPhy0x0D048F3E);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D04DF3E, _NOT_USED_, _NOT_USED_, BFPhy0x0D04DF3E);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2030, _NOT_USED_, _NOT_USED_, BFPhyClkConfig0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2130, _NOT_USED_, _NOT_USED_, BFPhyClkConfig1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2230, _NOT_USED_, _NOT_USED_, BFPhyClkConfig2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2330, _NOT_USED_, _NOT_USED_, BFPhyClkConfig3);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F0F13, _NOT_USED_, _NOT_USED_, BFPhy0x0D0F0F13);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F0830, _NOT_USED_, _NOT_USED_, BFPhy0x0D0F0830);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D07812F, _NOT_USED_, _NOT_USED_, BFPhy0x0D07812F);
+
+  LINK_TSEFO (NBRegTable, BFTwrrd, BFTwrrdHi);
+  LINK_TSEFO (NBRegTable, BFTwrwr, BFTwrwrHi);
+  LINK_TSEFO (NBRegTable, BFTrdrd, BFTrdrdHi);
+
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnParTrainDr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnParTrainDr.c
new file mode 100644
index 0000000000..7fd44836ea
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnParTrainDr.c
@@ -0,0 +1,225 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnParTrainDr.c
+ *
+ * Feature which performs Memory DQS training on each node with each node training
+ * its own memory through code running on a core in the associated processor.
+ * This way memory can be trained in parallel by more than one processor.
+ *
+ * This file contains the Deerhound specific parallel training function.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/HCTRN)
+ * @e \$Revision: 54775 $ @e \$Date: 2011-06-12 21:05:26 -0600 (Sun, 12 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+  *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mndr.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "mfParallelTraining.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DR_MNPARTRAINDR_FILECODE
+
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+BOOLEAN
+STATIC
+MemConstructRemoteNBBlockDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       DIE_STRUCT *MCTPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr
+);
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *       This is the training function which set up the environment for remote
+ * training on the ap and launches the remote routine.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  Launch training on AP successfully.
+ *     @return          FALSE - Fail to launch training on AP.
+ */
+BOOLEAN
+MemFParallelTrainingDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  AMD_CONFIG_PARAMS *StdHeader;
+  DIE_STRUCT *MCTPtr;
+  REMOTE_TRAINING_ENV *EnvPtr;
+  AP_TASK TrainingTask;
+  UINT8 Socket;
+  UINT8 Module;
+  UINT8 APCore;
+  UINT8 p;
+  UINT32 LowCore;
+  UINT32 HighCore;
+  UINT32 BspSocket;
+  UINT32 BspModule;
+  UINT32 BspCore;
+  AGESA_STATUS Status;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  UINT16 MctDataSize;
+
+  StdHeader = &(NBPtr->MemPtr->StdHeader);
+  MCTPtr = NBPtr->MCTPtr;
+  Socket = MCTPtr->SocketId;
+  Module = MCTPtr->DieId;
+
+  //
+  // Allocate buffer for REMOTE_TRAINING_ENV
+  //
+  MctDataSize = MAX_DCTS_PER_NODE_DR * (
+                  sizeof (DCT_STRUCT) + (
+                    MAX_CHANNELS_PER_DCT_DR * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                  )
+                );
+  AllocHeapParams.RequestedBufferSize = MctDataSize + sizeof (REMOTE_TRAINING_ENV);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, Socket, Module, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+    EnvPtr = (REMOTE_TRAINING_ENV *) AllocHeapParams.BufferPtr;
+    AllocHeapParams.BufferPtr += sizeof (REMOTE_TRAINING_ENV);
+
+    //
+    // Setup Remote training environment
+    //
+    LibAmdMemCopy (&(EnvPtr->StdHeader), StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+    LibAmdMemCopy (&(EnvPtr->DieStruct), MCTPtr, sizeof (DIE_STRUCT), StdHeader);
+    for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+      EnvPtr->GetPlatformCfg[p] = NBPtr->MemPtr->GetPlatformCfg[p];
+    }
+    EnvPtr->ErrorHandling = NBPtr->MemPtr->ErrorHandling;
+    EnvPtr->NBBlockCtor = MemConstructRemoteNBBlockDR;
+    EnvPtr->FeatPtr = NBPtr->FeatPtr;
+    EnvPtr->HoleBase = NBPtr->RefPtr->HoleBase;
+    EnvPtr->BottomIo = NBPtr->RefPtr->BottomIo;
+    EnvPtr->SysLimit = NBPtr->RefPtr->SysLimit;
+    EnvPtr->TableBasedAlterations = NBPtr->RefPtr->TableBasedAlterations;
+    EnvPtr->PlatformMemoryConfiguration = NBPtr->RefPtr->PlatformMemoryConfiguration;
+
+    LibAmdMemCopy (AllocHeapParams.BufferPtr, MCTPtr->DctData, MctDataSize, StdHeader);
+
+    //
+    // Get Socket, Core of the BSP
+    //
+    IdentifyCore (StdHeader, &BspSocket, &BspModule, &BspCore, &Status);
+    EnvPtr->BspSocket = ((UINT8)BspSocket & 0x000000FF);
+    EnvPtr->BspCore = ((UINT8)BspCore & 0x000000FF);
+
+    //
+    // Set up the remote task structure
+    //
+    TrainingTask.DataTransfer.DataPtr = EnvPtr;
+    TrainingTask.DataTransfer.DataSizeInDwords = (UINT16) (AllocHeapParams.RequestedBufferSize + 3) / 4;
+    TrainingTask.DataTransfer.DataTransferFlags = 0;
+    TrainingTask.ExeFlags = 0;
+    TrainingTask.FuncAddress.PfApTaskI = (PF_AP_TASK_I)MemFParallelTraining;
+
+    //
+    // Get Target AP Core
+    //
+    GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader);
+    APCore = (UINT8) (LowCore & 0x000000FF);
+
+    //
+    // Launch Remote Training
+    //
+    ApUtilRunCodeOnSocketCore (Socket, APCore, &TrainingTask, StdHeader);
+
+    HeapDeallocateBuffer (AllocHeapParams.BufferHandle, StdHeader);
+    return TRUE;
+  } else {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV, NBPtr->Node, 0, 0, 0, StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocated heap space for "REMOTE_TRAINING_ENV"
+    return FALSE;
+  }
+}
+
+BOOLEAN
+STATIC
+MemConstructRemoteNBBlockDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       DIE_STRUCT *MCTPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr
+  )
+{
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+
+  MemNInitNBDataDr (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+  FeatPtr->InitHwRxEn (NBPtr);
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  //----------------------------------------------------------------------------
+  // Get TSC rate of the this AP
+  //----------------------------------------------------------------------------
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &NBPtr->MemPtr->StdHeader);
+  FamilySpecificServices->GetTscRate (FamilySpecificServices, &NBPtr->MemPtr->TscRate, &NBPtr->MemPtr->StdHeader);
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnS3dr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnS3dr.c
new file mode 100644
index 0000000000..99799c0681
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnS3dr.c
@@ -0,0 +1,715 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mns3dr.c
+ *
+ * DR memory specific function to support S3 resume
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DR)
+ * @e \$Revision: 50673 $ @e \$Date: 2011-04-12 21:18:06 -0600 (Tue, 12 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "mndr.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mnS3dr.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_DR_MNS3DR_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  );
+
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstDr (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  );
+
+VOID
+STATIC
+MemNS3SetSpecialPCIRegDr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+STATIC
+MemNS3ExitSelfRefRegDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+PCI_SPECIAL_CASE PciSpecialCaseFuncDr[] = {
+  {MemNS3GetCSRNb, MemNS3SetCSRNb},
+  {MemNS3GetCSRNb, MemNS3SetSpecialPCIRegDr},
+  {MemNS3GetBitFieldNb, MemNS3SetBitFieldNb}
+};
+
+PCI_REG_DESCRIPTOR ROMDATA S3PciPreSelfRefDescriptorDr[] = {
+  {{0, 0, 0}, FUNC_2, 0x110, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x40,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x48,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x50,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x58,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x60,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x68,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x70,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x78,  0xFFFF3F03},
+  {{0, 1, 0}, FUNC_1, 0x140, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x148, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x150, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x158, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x160, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x168, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x170, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x178, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0x44,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x4C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x54,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x5C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x64,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x6C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x74,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x7C,  0xFFFF07FF},
+  {{0, 1, 0}, FUNC_1, 0x144, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x14C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x154, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x15C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x164, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x16C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x174, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x17C, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0xF0,  0xFF00FF83},
+  {{0, 0, 0}, FUNC_1, 0x120, 0x00FFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x124, 0x07FFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x114, 0xFFFFFC00},
+  {{0, 0, 0}, FUNC_2, 0x118, 0xF773FFFF},
+  {{0, 0, 0}, FUNC_2, 0x11C, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x1B0, 0xFFD3FF3F}
+};
+
+CONST PCI_REGISTER_BLOCK_HEADER ROMDATA S3PciPreSelfRefDr = {
+  0,
+  (sizeof (S3PciPreSelfRefDescriptorDr) / sizeof (PCI_REG_DESCRIPTOR)),
+  S3PciPreSelfRefDescriptorDr,
+  NULL
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPreSelfDescriptorDr[] = {
+   // DCT 0
+  {{0, 0, 0}, FUNC_2, 0x40,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x44,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x48,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x4C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x50,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x54,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x58,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x5C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x60,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x64,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x68,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x6C,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x78,  0xFFCDBF0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x7C,  0xFFF7FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x80,  0x0000FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x84,  0x07FFEFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x88,  0xFFFFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x8C,  0xFFFF7FFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x90,  0x00FFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0xA8,  0x0007FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),  0x30333333, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0x3FFFFFFF, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),  0x001FBFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),  0x003F3F3F, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig0, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig1, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig2, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig3, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  // errata 322
+  {{2, 2, 1}, DCT0,   BFErr322I, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFErr322II, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  // errata 263
+  {{2, 2, 1}, DCT0,   BFErr263, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+
+   // DCT 1
+  {{0, 0, 0}, FUNC_2, 0x140, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x144, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x148, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x14C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x150, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x154, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x158, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x15C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x160, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x164, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x168, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x16C, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x178, 0xFFCDBF0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x17C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x180, 0x0000FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x184, 0x07FFEFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x188, 0xFFFFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x18C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x190, 0x00FFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x1A8, 0x0007FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00), 0x30333333, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C), 0x001FBFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04), 0x003F3F3F, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig0, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig1, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig2, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig3, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 322
+  {{2, 2, 1}, DCT1,   BFErr322I, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFErr322II, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 263
+  {{2, 2, 1}, DCT1,   BFErr263, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Restore F2x[1,0]94 right before exit self refresh
+  {{0, 0, 0}, FUNC_2, 0x94,  0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x194, 0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK}
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPreSelfRefDr = {
+  0,
+  (sizeof (S3CPciPreSelfDescriptorDr) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPreSelfDescriptorDr,
+  PciSpecialCaseFuncDr
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPostSelfDescriptorDr[] = {
+  // DCT0
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x10),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x11),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x12),  0x000001FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x13),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x14),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x15),  0x000001FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x16),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x17),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x18),  0x000001FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x19),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1B),  0x000001FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x20),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x21),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x23),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x24),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x26),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x27),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x29),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x2A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x01),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x02),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x03),  0x0000007F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x101), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x102), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x103), 0x0000007F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x201), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x202), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x203), 0x0000007F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x301), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x302), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x303), 0x0000007F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x05),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x06),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x07),  0x0000003F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x105), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x106), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x107), 0x0000003F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x205), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x206), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x207), 0x0000003F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x305), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x306), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x307), 0x0000003F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0xFFFFFFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0D),  0x23772377, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x30),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x31),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x32),  0x000000FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x33),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x34),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x35),  0x000000FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x36),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x37),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x38),  0x000000FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x39),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3B),  0x000000FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x40),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x41),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x43),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x44),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x46),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x47),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x49),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x4A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+
+    // DCT1
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x10),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x11),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x12),  0x000001FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x13),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x14),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x15),  0x000001FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x16),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x17),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x18),  0x000001FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x19),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1B),  0x000001FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x20),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x21),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x23),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x24),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x26),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x27),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x29),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x2A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x01),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x02),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x03),  0x0000007F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x101),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x102),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x103),  0x0000007F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x201),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x202),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x203),  0x0000007F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x301),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x302),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x303),  0x0000007F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x05),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x06),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x07),  0x0000003F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x105),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x106),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x107),  0x0000003F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x205),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x206),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x207),  0x0000003F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x305),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x306),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x307),  0x0000003F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0D),  0x23772377, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x30),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x31),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x32),  0x000000FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x33),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x34),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x35),  0x000000FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x36),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x37),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x38),  0x000000FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x39),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3B),  0x000000FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x40),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x41),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x43),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x44),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x46),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x47),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x49),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x4A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+
+  // Restore scrubber related registers after restoring training related registers
+  {{0, 0, 0}, FUNC_3, 0x44,  0xFFFFFFFE, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x58,  0x1F1F1F1F, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT0,   BFScrubReDirEn, 0x00000001, ANY_DIMM_MASK, ANY_DIMM_MASK},
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPostSelfRefDr = {
+  0,
+  (sizeof (S3CPciPostSelfDescriptorDr) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPostSelfDescriptorDr,
+  PciSpecialCaseFuncDr
+};
+
+MSR_REG_DESCRIPTOR ROMDATA S3MSRPreSelfRefDescriptorDr[] = {
+  {{0, 0, 0}, 0xC0010010, 0x00000000007F07FF},
+  {{0, 0, 0}, 0xC001001A, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001D, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001F, 0xC047F87FFF527FFF}
+};
+
+CONST MSR_REGISTER_BLOCK_HEADER ROMDATA S3MSRPreSelfRefDr = {
+  0,
+  (sizeof (S3MSRPreSelfRefDescriptorDr) / sizeof (MSR_REG_DESCRIPTOR)),
+  S3MSRPreSelfRefDescriptorDr,
+  NULL
+};
+
+VOID *MemS3RegListDr[] = {
+  (VOID *)&S3PciPreSelfRefDr,
+  NULL,
+  (VOID *)&S3CPciPreSelfRefDr,
+  (VOID *)&S3CPciPostSelfRefDr,
+  (VOID *)&S3MSRPreSelfRefDr,
+  NULL,
+  NULL,
+  NULL
+};
+
+CONST UINT16 ROMDATA SpecialCasePCIRegDr[] = {
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04)
+};
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for S3 resume
+ *
+ *     @param[in,out]   *S3NBPtr   - Pointer to MEM_NB_BLOCK.
+ *     @param[in,out]   *MemPtr  - Pointer to MEM_DATA_STRUCT.
+ *     @param[in]       NodeID   - Node ID of the target node.
+ *
+ *      @return         BOOLEAN
+ *                         TRUE - This is the correct constructor for the targeted node.
+ *                         FALSE - This isn't the correct constructor for the targeted node.
+ */
+BOOLEAN
+MemS3ResumeConstructNBBlockDr (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  INT32 i;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = ((S3_MEM_NB_BLOCK *)S3NBPtr)->NBPtr;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedDr (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  InitNBRegTableDr (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->Ganged = FALSE;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DR;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DR;
+
+  for (i = 0; i < EnumSize; i++) {
+    NBPtr->IsSupported[i] = FALSE;
+  }
+
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) memDefTrue;
+  }
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &MemPtr->StdHeader);
+
+  NBPtr->IsSupported[CheckDllSpeedUp] = FALSE;
+  NBPtr->SwitchDCT = MemNSwitchDCTNb;
+  NBPtr->SwitchChannel = MemNSwitchChannelNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDr;
+  NBPtr->MemNIsIdSupportedNb = MemNIsIdSupportedDr;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3ExitSelfRefReg = MemNS3ExitSelfRefRegDr;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConPCIMask = MemNS3GetConPCIMaskNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConMSRMask = (VOID (*) (MEM_NB_BLOCK*, DESCRIPTOR_GROUP*)) memDefRet;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3Resume = MemNS3ResumeNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3RestoreScrub = MemNS3RestoreScrubNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetRegLstPtr = MemNS3GetRegLstPtrDr;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetDeviceRegLst = MemNS3GetDeviceRegLstDr;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3SpecialCaseHeapSize = (sizeof (SpecialCasePCIRegDr) / sizeof (UINT16)) * sizeof (UINT32);
+
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns the register list for each device for DR
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in, out]  *DescriptPtr - Pointer to DESCRIPTOR_GROUP
+ *     @return          UINT16 - size of the device descriptor on the target node.
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  )
+{
+  UINT8 i;
+  UINT16 Size;
+  Size = 0;
+  for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+    DescriptPtr->PCIDevice[i].Type = (UINT8) (DEV_TYPE_PCI_PRE_ESR + i);
+    DescriptPtr->PCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->PCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((PCI_REGISTER_BLOCK_HEADER *) MemS3RegListDr[PCI_LST_ESR_DR - PCI_LST_ESR_DR + i] != NULL) {
+      DescriptPtr->PCIDevice[i].RegisterListID = PCI_LST_ESR_DR + i;
+      Size += sizeof (PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CPCIDevice[i].Type = (UINT8) (DEV_TYPE_CPCI_PRE_ESR + i);
+    DescriptPtr->CPCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->CPCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CPCI_REGISTER_BLOCK_HEADER *) MemS3RegListDr[CPCI_LST_ESR_DR - PCI_LST_ESR_DR + i] != NULL) {
+      DescriptPtr->CPCIDevice[i].RegisterListID = CPCI_LST_ESR_DR + i;
+      Size += sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->MSRDevice[i].Type = (UINT8) (DEV_TYPE_MSR_PRE_ESR + i);
+    DescriptPtr->MSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((MSR_REGISTER_BLOCK_HEADER *) MemS3RegListDr[MSR_LST_ESR_DR - PCI_LST_ESR_DR + i] != NULL) {
+      DescriptPtr->MSRDevice[i].RegisterListID = MSR_LST_ESR_DR + i;
+      Size += sizeof (MSR_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CMSRDevice[i].Type = (UINT8) (DEV_TYPE_CMSR_PRE_ESR + i);
+    DescriptPtr->CMSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CMSR_REGISTER_BLOCK_HEADER *) MemS3RegListDr[CMSR_LST_ESR_DR - PCI_LST_ESR_DR + i] != NULL) {
+      DescriptPtr->CMSRDevice[i].RegisterListID = CMSR_LST_ESR_DR + i;
+      Size += sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR);
+    }
+  }
+  return Size;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function return the register list according to the register ID.
+ *
+ *     @param[in]   RegisterLstID - value of the Register list ID.
+ *     @param[out]  **RegisterHeader - pointer to the address of the register list.
+ *     @return      none
+ */
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstDr (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  )
+{
+  if (RegisterLstID >= (sizeof (MemS3RegListDr) / sizeof (VOID *))) {
+    ASSERT(FALSE); // RegisterListID exceeded size of Register list
+    return AGESA_FATAL;
+  }
+  if (MemS3RegListDr[RegisterLstID] != NULL) {
+    *RegisterHeader = MemS3RegListDr[RegisterLstID];
+    return AGESA_SUCCESS;
+  }
+  ASSERT(FALSE); // Device register list error
+  return AGESA_FATAL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in]   *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *      @return         none
+ */
+VOID
+STATIC
+MemNS3SetSpecialPCIRegDr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (Address.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_DR; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_DR);
+    // Save the value in the heap at appropriate offset based on the index
+    // of the target register in the special case array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegDr) / sizeof (UINT16)); i ++) {
+        if (SpecialCasePCIRegDr[i] == Address.Address.Register) {
+          *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2)) = *(UINT32 *) Value;
+        }
+      }
+    }
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in,out]  *NBPtr - Pointer to the northbridge block.
+ *     @param[in,out]  *StdHeader - Config handle for library and services.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3ExitSelfRefRegDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  PCI_ADDR PciAddr;
+  UINT32 Value;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+  PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+  PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+  PciAddr.Address.Function = 2;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, StdHeader) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (PciAddr.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_DR; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_DR);
+    // Restore the value one by one in the sequence of the special case register array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegDr) / sizeof (UINT16)); i ++) {
+        PciAddr.Address.Register = SpecialCasePCIRegDr[i];
+        Value = *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2));
+        MemNS3SetCSRNb (AccessS3SaveWidth32, PciAddr, &Value, StdHeader);
+      }
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnS3dr.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnS3dr.h
new file mode 100644
index 0000000000..6781e90853
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnS3dr.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnS3dr.h
+ *
+ * S3 resume memory related function for DR.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DR)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MNS3DR_H_
+#define _MNS3DR_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+/// ID for register list of DR
+typedef enum {
+  PCI_LST_ESR_DR,   ///< Assign 0x0000 for PCI register list for pre exit self refresh.
+  PCI_LST_DR,       ///< Assign 0x0001 for PCI register list for post exist self refresh.
+  CPCI_LST_ESR_DR,  ///< Assign 0x0002 for conditional PCI register list for pre exit self refresh.
+  CPCI_LST_DR,      ///< Assign 0x0003 for conditional PCI register list for post exit self refresh.
+  MSR_LST_ESR_DR,   ///< Assign 0x0004 for MSR register list for pre exit self refresh.
+  MSR_LST_DR,       ///< Assign 0x0005 for MSR register list for post exit self refresh.
+  CMSR_LST_ESR_DR,  ///< Assign 0x0006 for conditional MSR register list for pre exit self refresh.
+  CMSR_LST_DR,      ///< Assign 0x0007 for conditional MSR register list for post exit self refresh.
+} RegisterListIDDr;
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif //_MNS3DR_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mndctdr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mndctdr.c
new file mode 100644
index 0000000000..7e8e21067c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mndctdr.c
@@ -0,0 +1,514 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mndctdr.c
+ *
+ * Northbridge DR DCT supporting functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DR)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mndr.h"
+#include "merrhdl.h"
+#include "OptionMemory.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DR_MNDCTDR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemTCtlOnDimmMirrorDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BOOLEAN SetFlag
+  );
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function programs the memory controller with configuration parameters
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_FATAL may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ *     @return          NBPtr->MCTPtr->ErrCode - Contains detailed AGESA_STATUS value
+ */
+
+BOOLEAN
+memNAutoConfigDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  //======================================================================
+  // Build Dram Control Register Value (F2x78)
+  //======================================================================
+  //
+
+  MemNSetBitFieldNb (NBPtr, BFRdPtrInit, 6);
+  MemNSetBitFieldNb (NBPtr, BFDataTxFifoWrDly, 0);
+
+  MemNSetBitFieldNb (NBPtr, BFEarlyArbEn, 1);
+
+  //======================================================================
+  // Build Dram Config Lo Register Value
+  //======================================================================
+  //
+
+
+  if (MCTPtr->Status[SbParDimms]) {
+    //
+    // SbParDimms should be set for all DDR3 RDIMMS or DDR2 that support parity
+    // Cannot turn off ParEn for DDR3
+    //
+    //@attention - add debug option for parity control
+    if ((MemNGetBitFieldNb (NBPtr, BFDdr3Mode)!= 0) || (RefPtr->EnableParity)) {
+      MemNSetBitFieldNb (NBPtr, BFParEn, 1);
+    }
+  }
+
+  if (MCTPtr->GangedMode) {
+    MemNSetBitFieldNb (NBPtr, BFWidth128, 1);
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFX4Dimm, DCTPtr->Timings.Dimmx4Present & 0xF);
+
+  if (!MCTPtr->Status[SbRegistered]) {
+    MemNSetBitFieldNb (NBPtr, BFUnBuffDimm, 1);
+  }
+
+  if (MCTPtr->Status[SbEccDimms]) {
+    MemNSetBitFieldNb (NBPtr, BFDimmEccEn, 1);
+  }
+
+  //======================================================================
+  // Build Dram Config Hi Register Value
+  //======================================================================
+  //
+
+  MemNSetBitFieldNb (NBPtr, BFMemClkFreq, MemNGetMemClkFreqIdNb (NBPtr, DCTPtr->Timings.Speed));
+
+  if (MCTPtr->Status[SbRegistered]) {
+    if (DCTPtr->Timings.Dimmx4Present && DCTPtr->Timings.Dimmx8Present) {
+      MemNSetBitFieldNb (NBPtr, BFRDqsEn, 1);
+    }
+  }
+
+  if (RefPtr->EnableBankSwizzle) {
+    MemNSetBitFieldNb (NBPtr, BFBankSwizzleMode, 1);
+  }
+
+  if (DCTPtr->Timings.DimmQrPresent) {
+    if (UserOptions.CfgMemoryQuadrankType == QUADRANK_UNBUFFERED) {
+      MemNSetBitFieldNb (NBPtr, BFFourRankSoDimm, 1);
+    } else if (UserOptions.CfgMemoryQuadrankType == QUADRANK_REGISTERED) {
+      MemNSetBitFieldNb (NBPtr, BFFourRankRDimm, 1);
+    }
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFDcqBypassMax, 0xF);
+
+  MemNSetBitFieldNb (NBPtr, BFDcqArbBypassEn, 1);
+
+  //======================================================================
+  // Build Dram Config Misc Register Value
+  //======================================================================
+  //
+  MemNSetBitFieldNb (NBPtr, BFOdtSwizzle, 1);
+  // For DDR3 Registered Dimms
+  if (MCTPtr->Status[SbRegistered]) {
+    if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode)!= 0) {
+      MemNSetBitFieldNb (NBPtr, BFSubMemclkRegDly, 1);
+    }
+  }
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This is a general purpose function that executes before DRAM init
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNBeforeDramInitDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sends an MRS command
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSendMrsCmdDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN ClearODM;
+
+  ClearODM = FALSE;
+  if ((NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_C0) != 0) {
+    if (MemNGetBitFieldNb (NBPtr, BFEnDramInit) == 0) {
+      // For C0, if EnDramInit bit is cleared, ODM needs to be cleared before sending MRS
+      MemTCtlOnDimmMirrorDr (NBPtr, FALSE);
+      ClearODM = TRUE;
+    }
+  }
+
+  MemNSwapBitsNb (NBPtr);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d MR%d %04x\n",
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) >> 20) & 0xF,
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) >> 16) & 0xF,
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) & 0xFFFF));
+
+  // 1.Set SendMrsCmd=1
+  MemNSetBitFieldNb (NBPtr, BFSendMrsCmd, 1);
+
+  // 2.Wait for SendMrsCmd=0
+  MemNPollBitFieldNb (NBPtr, BFSendMrsCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+
+  if (ClearODM) {
+    // Restore ODM if necessary
+    MemTCtlOnDimmMirrorDr (NBPtr, TRUE);
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Workaround for erratum 322 and 263
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNBeforePlatformSpecDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  // Errata 263
+  if ((NBPtr->DCTPtr->Timings.Speed == DDR533_FREQUENCY) || (NBPtr->DCTPtr->Timings.Speed == DDR667_FREQUENCY)) {
+    MemNSetBitFieldNb (NBPtr, BFErr263, 0x0800);
+  } else {
+    MemNSetBitFieldNb (NBPtr, BFErr263, 0);
+  }
+
+  // Errata 322
+  // 1.Write 00000000h to F2x[1,0]9C_xD08E000
+  MemNSetBitFieldNb (NBPtr, BFErr322I, 0);
+  // 2.If DRAM Configuration Register[MemClkFreq] (F2x[1,0]94[2:0]) is
+  //    greater than or equal to 011b (DDR-800 and higher),
+  //    then write 00000080h to F2x[1,0]9C_xD02E001,
+  //    else write 00000090h to F2x[1,0]9C_xD02E001.
+  MemNSetBitFieldNb (NBPtr, BFErr322II, (NBPtr->DCTPtr->Timings.Speed >= DDR800_FREQUENCY) ? 0x80 : 0x90);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function disables/enables F2x[1, 0][5C:40][OnDimmMirror]
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   SetFlag   - Enable or disable flag - TRUE - Enable, FALSE - DISABLE
+ *
+ */
+
+VOID
+STATIC
+MemTCtlOnDimmMirrorDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BOOLEAN SetFlag
+  )
+{
+  UINT8 Chipsel;
+  UINT32 CSBaseAddrReg;
+
+  for (Chipsel = 0; Chipsel < MAX_CS_PER_CHANNEL; Chipsel += 2) {
+    CSBaseAddrReg = MemNGetBitFieldNb (NBPtr, BFCSBaseAddr1Reg + Chipsel);
+    if ((CSBaseAddrReg & 1) == 1) {
+      if (SetFlag && ((NBPtr->DCTPtr->Timings.DimmMirrorPresent & ((UINT8) 1 << (Chipsel >> 1))) != 0)) {
+        CSBaseAddrReg |= ((UINT32) 1 << BFOnDimmMirror);
+      } else {
+        CSBaseAddrReg &= ~((UINT32) 1 << BFOnDimmMirror);
+      }
+      MemNSetBitFieldNb (NBPtr, BFCSBaseAddr1Reg + Chipsel, CSBaseAddrReg);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function adjusts Avg PRE value of Phy fence training according to specific CPU family.
+ *
+ *     @param[in,out]   *NBPtr  - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *Value16 - Pointer to the value that we want to adjust
+ *
+ */
+
+VOID
+MemNPFenceAdjustDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   INT16 *Value16
+  )
+{
+  if ((NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_C0) != 0) {
+    *Value16 += 5; //for RB C0, the Avg PRE value is subtracted by 3 only.
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function uses calculated values from DCT.Timings structure to
+ *      program its RB registers.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNProgramCycTimingsDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CTENTRY DDR3TmgAdjTab[] = {
+    // BitField, Min, Max, Bias, Ratio_x2
+    {BFTcl, 4, 12, 4, 2},
+    {BFTrcd, 5, 12, 5, 2},
+    {BFTrp, 5, 12, 5, 2},
+    {BFTrtp, 4, 7, 4, 2},
+    {BFTras, 15, 30, 15, 2},
+    {BFTrc, 11, 42, 11, 2},
+    {BFTwrDDR3, 5, 12, 4, 2},
+    {BFTrrd, 4, 7, 4, 2},
+    {BFTwtr, 4, 7, 4, 2},
+    {BFFourActWindow, 16, 32, 14, 1}
+  };
+
+  CTENTRY DDR2TmgAdjTab[] = {
+    // BitField, Min, Max, Bias, Ratio_x2
+    {BFTcl, 3, 7, 1, 2},
+    {BFTrcd, 3, 6, 3, 2},
+    {BFTrp, 3, 6, 3, 4},
+    {BFTrtp, 2, 3, 2, 4},
+    {BFTras, 5, 18, 3, 2},
+    {BFTrc, 11, 26, 11, 2},
+    {BFTwr, 3, 6, 3, 2},
+    {BFTrrd, 2, 5, 2, 2},
+    {BFTwtr, 5, 8, 4, 2},
+    {BFFourActWindow, 8, 20, 7, 2}
+  };
+
+  CTENTRY *TmgAdjTab;
+  DCT_STRUCT *DCTPtr;
+  UINT8  *MiniMaxTmg;
+  UINT8  *MiniMaxTrfc;
+  UINT8  Value8;
+  UINT8  j;
+  UINT8  BurstMode;
+  BIT_FIELD_NAME BitField;
+
+  DCTPtr = NBPtr->DCTPtr;
+
+  //======================================================================
+  // Program DRAM Timing values
+  //======================================================================
+  //
+  if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode) == 1) {
+    TmgAdjTab = DDR3TmgAdjTab;
+  } else if (DCTPtr->Timings.Speed == DDR1066_FREQUENCY) {
+    // DDR2-1066 uses DDR3 table but differs in tCL
+    TmgAdjTab = DDR3TmgAdjTab;
+    TmgAdjTab[0].Min = 3;
+    TmgAdjTab[0].Max = 7;
+    TmgAdjTab[0].Bias = 1;
+  } else {
+    TmgAdjTab = DDR2TmgAdjTab;
+  }
+
+  MiniMaxTmg = &DCTPtr->Timings.CasL;
+  for (j = 0; j < GET_SIZE_OF (TmgAdjTab); j++) {
+    BitField = TmgAdjTab[j].BitField;
+
+    if (MiniMaxTmg[j] < TmgAdjTab[j].Min) {
+      MiniMaxTmg[j] = TmgAdjTab[j].Min;
+    } else if (MiniMaxTmg[j] > TmgAdjTab[j].Max) {
+      MiniMaxTmg[j] = TmgAdjTab[j].Max;
+    }
+
+    Value8 = (UINT8) MiniMaxTmg[j];
+
+    if (BitField == BFTwrDDR3) {
+      Value8 = (Value8 == 10) ? 9 : (Value8 == 12) ? 10 : Value8;
+    } else if (BitField == BFTrtp) {
+      Value8 = (DCTPtr->Timings.Speed <= DDR1066_FREQUENCY) ? 4 : (DCTPtr->Timings.Speed == DDR1333_FREQUENCY) ? 5 : 6;
+    }
+
+    Value8 = Value8 - TmgAdjTab[j].Bias;
+    Value8 = (Value8 * TmgAdjTab[j].Ratio_x2) >> 1;
+
+    MemNSetBitFieldNb (NBPtr, BitField, Value8);
+  }
+
+  MiniMaxTrfc = &DCTPtr->Timings.Trfc0;
+  for (j = 0; j < 4; j++) {
+    MemNSetBitFieldNb (NBPtr, BFTrfc0 + j, MiniMaxTrfc[j]);
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFTref, 2);      // 7.8 us
+
+  if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode) == 1) {
+    //======================================================================
+    // DDR3 additional settings
+    //======================================================================
+
+    MemNSetBitFieldNb (NBPtr, BFTcwl, ((DCTPtr->Timings.Speed >= DDR800_FREQUENCY) ?
+                                       (NBPtr->GetMemClkFreqId (NBPtr, DCTPtr->Timings.Speed) - 3) : 0));
+
+    MemNSetBitFieldNb (NBPtr, BFNonSPD, 0x28FF);
+
+    MemNSetBitFieldNb (NBPtr, BFNonSPDHi, 0x2A);
+
+    // DrvImpCtrl: drive impedance control.01b(34 ohm driver; Ron34 = Rzq/7)
+    MemNSetBitFieldNb (NBPtr, BFDrvImpCtrl, 1);
+
+    // burst length control
+    if (NBPtr->MCTPtr->Status[Sb128bitmode]) {
+      MemNSetBitFieldNb (NBPtr, BFBurstCtrl, 2);
+    }
+
+    // ASR=1, auto self refresh; SRT=0
+    MemNSetBitFieldNb (NBPtr, BFASR, 1);
+  } else {
+    //======================================================================
+    // DDR2 additional settings
+    //======================================================================
+
+    MemNSetBitFieldNb (NBPtr, BFNonSPD, 0xFF77);
+
+    BurstMode = UserOptions.CfgUseBurstMode;
+    IDS_OPTION_HOOK (IDS_BURST_LENGTH32, &BurstMode, &(NBPtr->MemPtr->StdHeader));
+    if (BurstMode) {
+      if (!NBPtr->MCTPtr->GangedMode) {
+        NBPtr->SetBitField (NBPtr, BFBurstLength32, 1);
+      }
+    }
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mndr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mndr.c
new file mode 100644
index 0000000000..f21e1d3d6e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mndr.c
@@ -0,0 +1,491 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mndr.c
+ *
+ * Common Northbridge functions for DR
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DR)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mndr.h"
+#include "mu.h"
+#include "merrhdl.h"
+#include "S3.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DR_MNDR_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define SPLIT_CHANNEL   (UINT32) 0x20000000
+#define CHANNEL_SELECT  (UINT32) 0x10000000
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern PSO_ENTRY DefaultPlatformMemoryConfiguration[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]        *FeatPtr  - Pointer to the MEM_FEAT_BLOCK_NB
+ *     @param[in]        *SharedPtr - Pointer to the MEM_SHARED_DATA
+ *     @param[in]        NodeID  - UINT8 indicating node ID of the NB object.
+ *
+ *     @return     Boolean indicating that this is the correct memory
+ *                 controller type for the node number that was passed in.
+ */
+
+BOOLEAN
+MemConstructNBBlockDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 SpdSocketIndex;
+  UINT8 SpdChannelIndex;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedDr (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->SharedPtr = SharedPtr;
+
+  MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->MCTPtr->NodeId = NodeID;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+  NBPtr->VarMtrrHiMsk = GetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_DR * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_DR * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                                          )
+                                        );
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+    return FALSE;
+  }
+
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_DR;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_DR * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DR; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_DR;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].Dct = Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_DR * sizeof (CH_DEF_STRUCT);
+  }
+  NBPtr->PSBlock = (MEM_PS_BLOCK *) AllocHeapParams.BufferPtr;
+
+  //
+  // Initialize Socket List
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DR; Dct++) {
+    MemPtr->SocketList[MCTPtr->SocketId].ChannelPtr[Dct] = &(MCTPtr->DctData[Dct].ChData[0]);
+    MemPtr->SocketList[MCTPtr->SocketId].TimingsPtr[Dct] = &(MCTPtr->DctData[Dct].Timings);
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = (MCTPtr->DieId * 2) + Dct;
+  }
+
+  MemNInitNBDataDr (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+  FeatPtr->InitHwRxEn (NBPtr);
+  //
+  // Calculate SPD Offsets per channel and assign pointers to the data.  At this point, we calculate the Node-Dct-Channel
+  // centric offsets and store the pointers to the first DIMM of each channel in the Channel Definition struct for that
+  // channel.  This pointer is then used later to calculate the offsets to be used for each logical dimm once the
+  // dimm types(QR or not) are known. This is done in the Technology block constructor.
+  //
+  // Calculate the SpdSocketIndex separately from the SpdChannelIndex.
+  // This will facilitate modifications due to some processors that might
+  // map the DCT-CHANNEL differently.
+  //
+  SpdSocketIndex = GetSpdSocketIndex (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, &MemPtr->StdHeader);
+  //
+  // Traverse the Dct/Channel structures
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DR; Dct++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_DR; Channel++) {
+      //
+      // Calculate the number of Dimms on this channel using the
+      //   die/dct/channel to Socket/channel conversion.
+      //
+      SpdChannelIndex = GetSpdChannelIndex (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                            NBPtr->MCTPtr->SocketId,
+                                            MemNGetSocketRelativeChannelNb (NBPtr, Dct, Channel),
+                                            &MemPtr->StdHeader);
+      NBPtr->MCTPtr->DctData[Dct].ChData[Channel].SpdPtr = &(MemPtr->SpdDataStructure[SpdSocketIndex + SpdChannelIndex]);
+    }
+  }
+
+  MemNSwitchDCTNb (NBPtr, 0);
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes member functions and variables of NB block.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitNBDataDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+  NBPtr->PsPtr = NBPtr->PSBlock;
+
+  InitNBRegTableDr (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DR;
+  NBPtr->ChannelCount = MAX_CHANNELS_PER_DCT_DR;
+  NBPtr->Ganged = FALSE;
+  NBPtr->PosTrnPattern = POS_PATTERN_72B;
+  NBPtr->MemCleared = FALSE;
+  NBPtr->StartupSpeed = DDR800_FREQUENCY;
+  NBPtr->RcvrEnDlyLimit = 0xFF;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DR;
+  NBPtr->DefDctSelIntLvAddr = 3;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+
+  NBPtr->SetMaxLatency = MemNSetMaxLatencyNb;
+  NBPtr->getMaxLatParams = MemNGetMaxLatParamsNb;
+  NBPtr->InitializeMCT = MemNInitializeMctDr;
+  NBPtr->FinalizeMCT = MemNFinalizeMctDr;
+  NBPtr->SendMrsCmd = MemNSendMrsCmdDr;
+  NBPtr->sendZQCmd = MemNSendZQCmdNb;
+  NBPtr->WritePattern = MemNWritePatternDr;
+  NBPtr->ReadPattern = MemNReadPatternDr;
+  NBPtr->GenHwRcvEnReads = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+  NBPtr->CompareTestPattern = MemNCompareTestPatternNb;
+  NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternNb;
+  NBPtr->StitchMemory = MemNStitchMemoryNb;
+  NBPtr->AutoConfig = memNAutoConfigDr;
+  NBPtr->PlatformSpec = MemNPlatformSpecNb;
+  NBPtr->InitMCT = MemNInitMCTNb;
+  NBPtr->DisableDCT = MemNDisableDCTNb;
+  NBPtr->StartupDCT = MemNStartupDCTNb;
+  NBPtr->SyncTargetSpeed = MemNSyncTargetSpeedNb;
+  NBPtr->ChangeFrequency = MemNChangeFrequencyNb;
+  NBPtr->RampUpFrequency = MemNRampUpFrequencyNb;
+  NBPtr->ChangeNbFrequency = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefFalse;
+  NBPtr->ProgramCycTimings = MemNProgramCycTimingsDr;
+  NBPtr->SyncDctsReady = MemNSyncDctsReadyNb;
+  NBPtr->HtMemMapInit = MemNHtMemMapInitNb;
+  NBPtr->SyncAddrMapToAllNodes = MemNSyncAddrMapToAllNodesNb;
+  NBPtr->CpuMemTyping = MemNCPUMemTypingNb;
+  NBPtr->BeforeDqsTraining = MemNBeforeDQSTrainingNb;
+  NBPtr->AfterDqsTraining = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+  NBPtr->OtherTiming = (BOOLEAN (*) (MEM_NB_BLOCK *)) MemMDefRet;    //@attention - due to build issue with MemNOtherTimingDr
+  NBPtr->UMAMemTyping = MemNUMAMemTypingNb;
+  NBPtr->TechBlockSwitch = MemNTechBlockSwitchNb;
+  NBPtr->SetEccSymbolSize = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+  NBPtr->TrainingFlow = MemNTrainingFlowNb;
+  NBPtr->MinDataEyeWidth = MemNMinDataEyeWidthNb;
+  MemNInitNBDataNb (NBPtr);
+  NBPtr->PollBitField = MemNPollBitFieldNb;
+  NBPtr->BrdcstCheck = MemNBrdcstCheckNb;
+  NBPtr->BrdcstSet = MemNBrdcstSetNb;
+  NBPtr->GetTrainDly = MemNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemNSetTrainDlyNb;
+  NBPtr->PhyFenceTraining = MemNPhyFenceTrainingNb;
+  NBPtr->GetSysAddr = MemNGetMCTSysAddrNb;
+  NBPtr->RankEnabled = MemNRankEnabledNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelNb;
+  NBPtr->MemNPlatformSpecificFormFactorInitNb = MemNPlatformSpecificFormFactorInitDr;
+  NBPtr->MemNBeforePlatformSpecNb = MemNBeforePlatformSpecDr;
+  NBPtr->MemNcmnGetSetTrainDly = MemNcmnGetSetTrainDlyNb;
+  NBPtr->MemPPhyFenceTrainingNb = MemPPhyFenceTrainingDr;
+  NBPtr->MemPNodeMemBoundaryNb = MemPNodeMemBoundaryDr;
+  NBPtr->MemNInitPhyComp = MemNInitPhyCompNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDr;
+  NBPtr->MemNBeforeDramInitNb = MemNBeforeDramInitDr;
+  NBPtr->MemNPFenceAdjustNb = MemNPFenceAdjustDr;
+  NBPtr->GetTrainDlyParms = MemNGetTrainDlyParmsNb;
+  NBPtr->TrainingPatternInit = MemNTrainingPatternInitNb;
+  NBPtr->TrainingPatternFinalize = MemNTrainingPatternFinalizeNb;
+  NBPtr->GetApproximateWriteDatDelay = MemNGetApproximateWriteDatDelayNb;
+  NBPtr->CSPerChannel = MemNCSPerChannelNb;
+  NBPtr->CSPerDelay = MemNCSPerDelayNb;
+  NBPtr->FlushPattern = MemNFlushPatternNb;
+  NBPtr->MemNCapSpeedBatteryLife = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+  NBPtr->GetUmaSize = MemNGetUmaSizeNb;
+  NBPtr->GetMemClkFreqId = MemNGetMemClkFreqIdNb;
+  NBPtr->EnableSwapIntlvRgn = (VOID (*) (MEM_NB_BLOCK *, UINT32, UINT32)) memDefRet;
+  NBPtr->WaitXMemClks = MemNWaitXMemClksNb;
+  NBPtr->MemNGetDramTerm = MemNGetDramTermNb;
+  NBPtr->MemNGetDynDramTerm = MemNGetDynDramTermNb;
+  NBPtr->MemNGetMR0CL = MemNGetMR0CLNb;
+  NBPtr->MemNGetMR0WR = MemNGetMR0WRNb;
+  NBPtr->MemNSaveMR0 = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+  NBPtr->MemNGetMR2CWL = MemNGetMR2CWLNb;
+  NBPtr->AllocateC6Storage = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+
+  NBPtr->IsSupported[SetSpareEn] = TRUE;
+  NBPtr->IsSupported[CheckSpareEn] = TRUE;
+  NBPtr->IsSupported[DimmBasedOnSpeed] = TRUE;
+  NBPtr->IsSupported[CheckMaxDramRate] = TRUE;
+  NBPtr->IsSupported[Check1GAlign] = TRUE;
+  NBPtr->IsSupported[CheckMaxRdDqsDlyPtr] = TRUE;
+  NBPtr->IsSupported[CheckGetMCTSysAddr] = TRUE;
+  NBPtr->IsSupported[CheckFindPSOverideWithSocket] = TRUE;
+  NBPtr->IsSupported[CheckSlewWithMarginImprv] = TRUE;
+  NBPtr->IsSupported[ForceEnMemHoleRemapping] = TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the default values in the MEM_DATA_STRUCT
+ *
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+VOID
+MemNInitDefaultsDR (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT8 Socket;
+  UINT8 Channel;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  ASSERT (MemPtr != NULL);
+  RefPtr = MemPtr->ParameterListPtr;
+
+  // Memory Map/Mgt.
+  // Mask Bottom IO with 0xF8 to force hole size to have granularity of 128MB
+  RefPtr->BottomIo = 0xE0;
+  RefPtr->UmaMode = UserOptions.CfgUmaMode;
+  RefPtr->UmaSize = UserOptions.CfgUmaSize;
+  RefPtr->MemHoleRemapping = TRUE;
+  RefPtr->LimitMemoryToBelow1Tb = UserOptions.CfgLimitMemoryToBelow1Tb;
+  //
+
+
+  // Dram Timing
+  RefPtr->UserTimingMode = UserOptions.CfgTimingModeSelect;
+  RefPtr->MemClockValue = UserOptions.CfgMemoryClockSelect;
+  for (Socket = 0; Socket < MAX_SOCKETS_SUPPORTED; Socket++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_SOCKET; Channel++) {
+      MemPtr->SocketList[Socket].ChannelPtr[Channel] = NULL;
+      MemPtr->SocketList[Socket].TimingsPtr[Channel] = NULL;
+    }
+  }
+
+  // Memory Clear
+  RefPtr->EnableMemClr = TRUE;
+
+  // TableBasedAlterations
+  RefPtr->TableBasedAlterations = NULL;
+
+  // Platform config table
+  RefPtr->PlatformMemoryConfiguration = DefaultPlatformMemoryConfiguration;
+
+  // Memory Restore
+  RefPtr->MemRestoreCtl = FALSE;
+  RefPtr->SaveMemContextCtl = FALSE;
+  AmdS3ParamsInitializer (&RefPtr->MemContext);
+
+  // Dram Configuration
+  RefPtr->EnableBankIntlv = UserOptions.CfgMemoryEnableBankInterleaving;
+  RefPtr->EnableNodeIntlv = UserOptions.CfgMemoryEnableNodeInterleaving;
+  RefPtr->EnableChannelIntlv = UserOptions.CfgMemoryChannelInterleaving;
+  RefPtr->EnableBankSwizzle = UserOptions.CfgBankSwizzle;
+  RefPtr->EnableParity = UserOptions.CfgMemoryParityEnable;
+  RefPtr->EnableOnLineSpareCtl = UserOptions.CfgOnlineSpare;
+
+  // Dram Power
+  RefPtr->EnablePowerDown = UserOptions.CfgMemoryPowerDown;
+
+  // ECC
+  RefPtr->EnableEccFeature = UserOptions.CfgEnableEccFeature;
+
+  // Vref
+  RefPtr->ExternalVrefCtl = UserOptions.CfgExternalVrefCtlFeature;
+
+  //Training Mode
+  RefPtr->ForceTrainMode = UserOptions.CfgForceTrainMode;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function writes training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Pattern[] - Pattern to write
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNWritePatternDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUWriteCachelines (Address, Pattern, ClCount);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function reads training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Buffer[] - Buffer to fill
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNReadPatternDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUReadCachelines (Buffer, Address, ClCount);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates DQS training for Server NB
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+memNEnableTrainSequenceDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN Retval;
+  Retval = TRUE;
+  if (!MemNIsIdSupportedDr (NBPtr, &(NBPtr->MemPtr->DiesPerSystem[NBPtr->MCTPtr->NodeId].LogicalCpuid))) {
+    Retval = FALSE;
+  }
+  return Retval;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mndr.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mndr.h
new file mode 100644
index 0000000000..248761a394
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mndr.h
@@ -0,0 +1,198 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mndr.h
+ *
+ * Northbridge DR
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MNDR_H_
+#define _MNDR_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_CHANNELS_PER_SOCKET_DR    2
+#define MAX_DCTS_PER_NODE_DR          2
+#define MAX_CHANNELS_PER_DCT_DR       1
+#define MAX_NODES_SUPPORTED_DR        8
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemConstructNBBlockDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemNInitNBDataDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitDefaultsDR (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+BOOLEAN
+MemNInitializeMctDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNFinalizeMctDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNSendMrsCmdDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+memNAutoConfigDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNOtherTimingDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNWritePatternDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemNReadPatternDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemPNodeMemBoundaryDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   UINT32 *NodeSysLimit
+  );
+
+VOID
+InitNBRegTableDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   TSEFO NBRegTable[]
+  );
+
+BOOLEAN
+MemNIsIdSupportedDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+VOID
+MemNBeforeDramInitDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNBeforePlatformSpecDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemPPhyFenceTrainingDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemNCmnGetSetFieldDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+VOID
+MemNPFenceAdjustDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   INT16 *Value16
+  );
+
+VOID
+MemNProgramCycTimingsDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+memNEnableTrainSequenceDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+#endif  /* _MNDR_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnflowdr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnflowdr.c
new file mode 100644
index 0000000000..6970f5b4f0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnflowdr.c
@@ -0,0 +1,141 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnflowdr.c
+ *
+ * Deerhound initializer for MCT and DCT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mndr.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DR_MNFLOWDR_FILECODE
+/* features */
+#include "mftds.h"
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledDR[MAX_FF_TYPES];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function initializes the platform specific block
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - AGESA_SUCCESS at least one dorm factor was found
+ *     @return          FALSE - AGESA_UNSUPPORTED - Error indicating that no form factors were found
+ */
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 f;
+  UINT8 ErrUnSuppFFCount;
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DR; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->ChannelPtr->ChDimmValid != 0) {
+      ErrUnSuppFFCount = 0;
+      for (f = 0; f < MAX_FF_TYPES; f++) {
+        ASSERT (memPlatSpecFFInstalledDR[f] != NULL);
+        if (memPlatSpecFFInstalledDR[f] (NBPtr->MemPtr, NBPtr->ChannelPtr, NBPtr->PsPtr) == AGESA_UNSUPPORTED) {
+          ErrUnSuppFFCount++; //Count the number of AGESA_UNSUPPORTED errors
+        } else {
+          break;
+        }
+      }
+      if (ErrUnSuppFFCount == MAX_FF_TYPES) {
+        return FALSE; // No FF types are supported
+      }
+    }
+  }
+  return TRUE;
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnidendimmdr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnidendimmdr.c
new file mode 100644
index 0000000000..2cf2c1ac6b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnidendimmdr.c
@@ -0,0 +1,140 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnidendimmdr.c
+ *
+ * DR northbridge constructor for dimm identification translator.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DR)
+ * @e \$Revision: 45911 $ @e \$Date: 2011-01-24 13:55:11 -0700 (Mon, 24 Jan 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mndr.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DR_MNIDENDIMMDR_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for dimm identification translator
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in,out]   NodeID   - ID of current node to construct
+ *     @return          TRUE     - This is the correct constructor for the targeted node.
+ *     @return          FALSE    - This isn't the correct constructor for the targeted node.
+ *
+ */
+
+BOOLEAN
+MemNIdentifyDimmConstructorDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedDr (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DR;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DR;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Ganged = FALSE;
+  InitNBRegTableDr (NBPtr, NBPtr->NBRegTable);
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDr;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelNb;
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnmctdr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnmctdr.c
new file mode 100644
index 0000000000..497ba9cdce
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnmctdr.c
@@ -0,0 +1,194 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnmctdr.c
+ *
+ * Northbridge DR MCT supporting functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DR)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mndr.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DR_MNMCTDR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets final values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNFinalizeMctDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  DRAM_PREFETCH_MODE DramPrefetchMode;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+  DramPrefetchMode = MemPtr->PlatFormConfig->PlatformProfile.AdvancedPerformanceProfile.DramPrefetchMode;
+
+  MemNSetBitFieldNb (NBPtr, BFAdapPrefMissRatio, 1);
+  MemNSetBitFieldNb (NBPtr, BFAdapPrefPosStep, 0);
+  MemNSetBitFieldNb (NBPtr, BFAdapPrefNegStep, 0);
+  MemNSetBitFieldNb (NBPtr, BFCohPrefPrbLmt, 1);
+  // Recommended settings for F2x11C
+  MemNSetBitFieldNb (NBPtr, BFMctWrLimit, 16);
+  MemNSetBitFieldNb (NBPtr, BFPrefCpuDis, 0);
+  MemNSetBitFieldNb (NBPtr, BFPrefIoDis, 0);
+  MemNSetBitFieldNb (NBPtr, BFFlushWrOnStpGnt, 1);
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_IO || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefIoDis, 1);
+  }
+
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_CPU || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefCpuDis, 1);
+  }
+
+  if (NBPtr->Node == BSP_DIE) {
+    if (!NBPtr->ClToNbFlag) {
+      LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+      SMsr.lo &= ~((UINT32)1 << 15);                // ClLinesToNbDis
+      LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    }
+
+    LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    SMsr.hi &= ~((UINT32)1 << (48 - 32));               // WbEnhWsbDis
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  }
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets initial values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNInitializeMctDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+  if (NBPtr->Node == BSP_DIE) {
+    LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    if (SMsr.lo & ((UINT32)1 << 15)) {
+      NBPtr->ClToNbFlag = 1;
+    }
+    SMsr.lo |= (UINT32)1 << 15;                   // ClLinesToNbDis
+    LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+    LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    SMsr.hi |= (UINT32)1 << (48 - 32);              // WbEnhWsbDis
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnotdr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnotdr.c
new file mode 100644
index 0000000000..5227e06a23
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnotdr.c
@@ -0,0 +1,199 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnotdr.c
+ *
+ * Northbridge Non-SPD timings for DR
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DR)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mndr.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DR_MNOTDR_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemNSetOtherTimingDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemNPowerDownCtlDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the non-SPD timings
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNOtherTimingDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+
+  MemNSwitchDCTNb (NBPtr, 0);
+  if (NBPtr->DCTPtr->Timings.DctDimmValid > 0) {
+    MemNSetOtherTimingDR (NBPtr);        // Set DR Timings
+    MemNPowerDownCtlNb (NBPtr);
+  }
+
+  MemNSwitchDCTNb (NBPtr, 1);
+  if ((NBPtr->DCTPtr->Timings.DctDimmValid > 0) && (NBPtr->MCTPtr->GangedMode == FALSE)) {
+    MemNSetOtherTimingDR (NBPtr);                // Set DR Timings
+    MemNPowerDownCtlNb (NBPtr);
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the non-SPD timings into the PCI registers
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNSetOtherTimingDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSetBitFieldNb (NBPtr, BFTrdrd, MemNGetTrdrdNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTwrwr, MemNGetTwrwrNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTwrrd, MemNGetTwrrdNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTrwtTO, MemNGetTrwtTONb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTrwtWB, MemNGetTrwtWBNb (NBPtr));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function enables power down mode
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNPowerDownCtlDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_PARAMETER_STRUCT *RefPtr;
+  UINT8 PowerDownMode;
+
+  RefPtr = NBPtr->RefPtr;
+
+  // we can't enable powerdown mode when doing WL
+  if (RefPtr->EnablePowerDown) {
+    MemNSetBitFieldNb (NBPtr, BFPowerDownEn, 1);
+    PowerDownMode = (UINT8) UserOptions.CfgPowerDownMode;
+    IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(NBPtr->MemPtr->StdHeader));
+    if (PowerDownMode) {
+      MemNSetBitFieldNb (NBPtr, BFPowerDownMode, 1);
+    }
+  }
+}
+
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnprotodr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnprotodr.c
new file mode 100644
index 0000000000..68c31ee1ad
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnprotodr.c
@@ -0,0 +1,169 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnprotodr.c
+ *
+ * Northbridge support functions for Errata and early samples
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DR)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+
+#include "AGESA.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mndr.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DR_MNPROTODR_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemNTrainFenceWHardCodeValDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function conditionally executes specific Phy fence training function.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemPPhyFenceTrainingDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (NBPtr->GetBitField (NBPtr, BFDdr3Mode) == 0) {
+    //DDR2 specific.
+    if (NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_C0) {
+      MemNTrainFenceWHardCodeValDr (NBPtr);
+    } else {
+      MemNTrainPhyFenceNb (NBPtr);
+    }
+  } else {
+    //DDR3 specific.
+    MemNTrainPhyFenceNb (NBPtr);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function executes hardcoded Phy fence training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNTrainFenceWHardCodeValDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 CurDct;
+  UINT16 Speed;
+
+  CurDct = NBPtr->Dct;
+  if (NBPtr->MCTPtr->NodeMemSize) {
+    for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DR; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      Speed = NBPtr->DCTPtr->Timings.Speed;
+      NBPtr->SetBitField (NBPtr, BFPhyFence, ((Speed == DDR800_FREQUENCY) || (Speed == DDR1066_FREQUENCY)) ? 20 : 20);
+      NBPtr->SetBitField (NBPtr, BFSlowAccessMode, (NBPtr->ChannelPtr->SlowMode) ? 1 : 0);
+      NBPtr->SetBitField (NBPtr, BFODCControl, NBPtr->ChannelPtr->DctOdcCtl);
+      NBPtr->SetBitField (NBPtr, BFAddrTmgControl, NBPtr->ChannelPtr->DctAddrTmg);
+    }
+  }
+
+  NBPtr->SwitchDCT (NBPtr, CurDct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function executes Node memory 1GB boundary alignment.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *NodeSysLimit   - Pointer to the NodeSysLimit
+ *
+ */
+
+VOID
+MemPNodeMemBoundaryDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   UINT32 *NodeSysLimit
+  )
+{
+  if (NBPtr->GetBitField (NBPtr, BFDdr3Mode) == 0) {
+    // only apply to DDR2.
+    if (*NodeSysLimit > ((UINT32)1 << (30 - 16))) {
+      // if (NodeSysLimit > 1GB) then set to Node limit to 1GB boundary for each node
+      *NodeSysLimit += 1;
+      *NodeSysLimit &= 0xFFFFC000;
+      *NodeSysLimit -= 1;
+    }
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnregdr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnregdr.c
new file mode 100644
index 0000000000..61bd44b8e8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/DR/mnregdr.c
@@ -0,0 +1,554 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnregdr.c
+ *
+ * Common Northbridge register related functions for DR
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/DR)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mndr.h"
+#include "merrhdl.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_DR_MNREGDR_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemNIsIdSupportedDr
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ *     @return          TRUE -  This node is a RB.
+ *     @return          FALSE - This node is not a RB.
+ *
+ */
+BOOLEAN
+MemNIsIdSupportedDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+
+  if (((LogicalIdPtr->Family & (AMD_FAMILY_10_RB | AMD_FAMILY_10_BL | AMD_FAMILY_10_DA)) != 0)
+      && ((LogicalIdPtr->Revision & (AMD_F10_RB_ALL | AMD_F10_BL_ALL | AMD_F10_DA_ALL)) != 0)) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Bit Field to be programmed
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+MemNCmnGetSetFieldDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  TSEFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT8 IsLinked;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+
+  Value = 0;
+  if ((FieldName < BFEndOfList) && (FieldName >= 0)) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = (UINT8) TSEFO_TYPE (Address);
+      IsLinked = (UINT8) TSEFO_LINKED (Address);
+
+      // If Fn2 and DCT1 selected, set Address to be 1xx
+      if ((Type == NB_ACCESS) && ((Address & 0xF000) == 0x2000) && NBPtr->Dct) {
+        if (!NBPtr->Ganged || (Address & 0xFF) == 0x98 || (Address & 0xFF) == 0x9C) {
+          Address |= 0x0100;
+        }
+      }
+
+      ASSERT ((Address & ((UINT32) 1) << 28) == 0);   // Phy direct access method is not supported
+
+      if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) {
+        // Special DCT Phy access
+        Address &= 0x0FFFFFFF;
+        Lowbit = 0;
+        Highbit = 16;
+        IsLinked = 0;
+      } else {
+        // Normal DCT Phy access
+        Address = TSEFO_OFFSET (Address);
+      }
+
+      if (Type == NB_ACCESS) {
+        PciAddr.AddressValue = Address;
+        PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+        PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+        PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+        Address = PciAddr.AddressValue;
+        LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+        if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) &&
+            (FieldName != BFDctExtraDataReg) && (FieldName != BFDctExtraOffsetReg)) {
+          IDS_HDT_CONSOLE (MEM_GETREG, "~Fn%d_%03x = %x\n", (Address >> 12) & 0xF, Address & 0xFFF, Value);
+        }
+      } else if (Type == DCT_PHY_ACCESS) {
+        MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+        MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+        Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+        IDS_HDT_CONSOLE (MEM_GETREG, "~Fn2_%d9C_%x = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Value);
+      } else {
+        IDS_ERROR_TRAP;
+      }
+
+      if (IsSet) {
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        } else {
+          Mask = (UINT32)0xFFFFFFFF;
+        }
+        Value &= ~(Mask << Lowbit);
+        Value |= (Field & Mask) << Lowbit;
+
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+          if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) &&
+              (FieldName != BFDctExtraDataReg) && (FieldName != BFDctExtraOffsetReg)) {
+            IDS_HDT_CONSOLE (MEM_SETREG, "~Fn%d_%03x [%d:%d] = %x\n", (Address >> 12) & 0xF, Address & 0xFFF, Highbit, Lowbit, Field);
+          }
+        } else if (Type == DCT_PHY_ACCESS) {
+          MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+          MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+          IDS_HDT_CONSOLE (MEM_SETREG, "~Fn2_%d9C_%x [%d:%d] = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Highbit, Lowbit, Field);
+        } else {
+          IDS_ERROR_TRAP;
+        }
+        if (IsLinked) {
+          MemNCmnGetSetFieldDr (NBPtr, 1, FieldName + 1, Field >> (Highbit - Lowbit + 1));
+        }
+      } else {
+        Value = Value >> Lowbit;  // Shift
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        }
+        if (IsLinked) {
+          Value |= MemNCmnGetSetFieldDr (NBPtr, 0, FieldName + 1, 0) << (Highbit - Lowbit + 1);
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes bit field translation table
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   NBRegTable[]   - Pointer to the bit field data structure
+ *
+ */
+
+VOID
+InitNBRegTableDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   TSEFO NBRegTable[]
+  )
+{
+  UINT16 i;
+
+  // Allocate heap for NB register table
+  if (!MemNAllocateNBRegTableNb (NBPtr, NbRegTabDR)) {
+    return;     // escape if fails
+  }
+  NBRegTable = NBPtr->NBRegTable;
+
+  for (i = 0; i < BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31,  0, BFDevVendorIDReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  2,  0, BFNodeID);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  6,  4, BFNodeCnt);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x48), 31, 0, BFDramBaseReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x4C), 31, 0, BFDramLimitReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x50), 31, 0, BFDramBaseReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x54), 31, 0, BFDramLimitReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x58), 31, 0, BFDramBaseReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x5C), 31, 0, BFDramLimitReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x60), 31, 0, BFDramBaseReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x64), 31, 0, BFDramLimitReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x68), 31, 0, BFDramBaseReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x6C), 31, 0, BFDramLimitReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x70), 31, 0, BFDramBaseReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x74), 31, 0, BFDramLimitReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x78), 31, 0, BFDramBaseReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x7C), 31, 0, BFDramLimitReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 0, BFDramHoleAddrReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x140), 7, 0, BFDramBaseHiReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x144), 7, 0, BFDramLimitHiReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x148), 7, 0, BFDramBaseHiReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x14C), 7, 0, BFDramLimitHiReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x150), 7, 0, BFDramBaseHiReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x154), 7, 0, BFDramLimitHiReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x158), 7, 0, BFDramBaseHiReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x15C), 7, 0, BFDramLimitHiReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x160), 7, 0, BFDramBaseHiReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x164), 7, 0, BFDramLimitHiReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x168), 7, 0, BFDramBaseHiReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x16C), 7, 0, BFDramLimitHiReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x170), 7, 0, BFDramBaseHiReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x174), 7, 0, BFDramLimitHiReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x178), 7, 0, BFDramBaseHiReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x17C), 7, 0, BFDramLimitHiReg7);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 24, BFDramHoleBase);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 15,  7, BFDramHoleOffset);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0),  1,  1, BFDramMemHoistValid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0),  0,  0, BFDramHoleValid);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x120), 20,  0, BFDramBaseAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x120), 23, 21, BFDramIntlvSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x124), 20,  0, BFDramLimitAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x124), 26, 21, BFDramIntlvEn);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31,  0, BFDramControlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31,  0, BFDramMRSReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31,  0, BFDramTimingHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA0), 31,  0, BFDramConfigMiscReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 31,  0, BFDramCtrlMiscReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF4), 31,  0, BFDctExtraDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 31,  0, BFMctCfgHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x118), 31,  0, BFMctCfgLoReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x40), 31,  0, BFMcaNbCtlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44), 22, 22, BFDramEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44),  2,  2, BFSyncOnUcEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x180), 25, 25, BFEccSymbolSize);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x48), 31,  0, BFMcaNbStatusLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x4C), 31,  0, BFMcaNbStatusHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58),  4,  0, BFDramScrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 12,  8, BFL2Scrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 20, 16, BFDcacheScrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 28, 24, BFL3Scrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C),  0,  0, BFScrubReDirEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C), 31,  0, BFScrubAddrLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x60), 31,  0, BFScrubAddrHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x84), 31, 29, BFC1ClkDivisor);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x8C),  4,  4, BFDisDatMsk);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4),  4,  0, BFNbFid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xE8), 25, 25, BFL3Capable);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x188), 8,  8, BFReserved00B);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 13,  8, BFNonSPDHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78),  3,  0, BFRdPtrInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78),  9,  8, BFTwrrdHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 11, 10, BFTwrwrHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 13, 12, BFTrdrdHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 16, 16, BFReserved001);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 19, 19, BFEarlyArbEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 24, 24, BFSendPchgAll);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 25, 25, BFSendAutoRefresh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFMrsLevel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  1,  0, BFBurstCtrl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  3,  2, BFDrvImpCtrl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  9,  7, BFDramTerm_DDR3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 13, 13, BFQoff);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 18, 18, BFASR);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 19, 19, BFSRT);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 22, 20, BFTcwl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 23, 23, BFPchgPDModeSel);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  6,  4, BFTwrDDR3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  3,  0, BFTcl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  6,  4, BFTrcd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  9,  7, BFTrp);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 11, 10, BFTrtp);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 15, 12, BFTras);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 20, 16, BFTrc);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 21, 20, BFTwr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 23, 22, BFTrrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31, 24, BFMemClkDis);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 15,  0, BFNonSPD);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  3,  0, BFTrwtWB);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  7,  4, BFTrwtTO);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  9,  8, BFTwtr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 11, 10, BFTwrrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 13, 12, BFTwrwr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 15, 14, BFTrdrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 17, 16, BFTref);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 22, 20, BFTrfc0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 25, 23, BFTrfc1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 28, 26, BFTrfc2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31, 29, BFTrfc3);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  0,  0, BFInitDram);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  1,  1, BFExitSelfRef);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  5,  4, BFDramTerm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  8,  8, BFParEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 10, 10, BFBurstLength32);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 11, 11, BFWidth128);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 15, 12, BFX4Dimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 17, 17, BFEnterSelfRef);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 19, 19, BFDimmEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 21, 21, BFFreqChgInProg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 23, 23, BFForceAutoPchg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  2,  0, BFMemClkFreq);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  3,  3, BFMemClkFreqVal);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  8,  8, BFDdr3Mode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  9,  9, BFLegacyBiosMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 12, 12, BFRDqsEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 15, 15, BFPowerDownEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 16, 16, BFPowerDownMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 17, 17, BFFourRankSoDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 19, 19, BFDcqArbBypassEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 18, 18, BFFourRankRDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 20, 20, BFSlowAccessMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 22, 22, BFBankSwizzleMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 27, 24, BFDcqBypassMax);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31, 28, BFFourActWindow);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4),  8,  8, BFODTSEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4), 14, 12, BFCmdThrottleMode);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  2,  2, BFDdr3FourSocketCh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  5,  5, BFSubMemclkRegDly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  6,  6, BFOdtSwizzle);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15,  8, BFCtrlWordCS);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 18, 16, BFDataTxFifoWrDly);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  0,  0, BFDctSelHiRngEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  1,  1, BFDctSelHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  2,  2, BFDctSelIntLvEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  3,  3, BFMemClrInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  4,  4, BFDctGangEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  5,  5, BFDctDatIntLv);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  7,  6, BFDctSelIntLvAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  8,  8, BFDramEnabled);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  9,  9, BFMemClrBusy);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 10, 10, BFMemCleared);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 11, BFDctSelBaseAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 10, BFDctSelBaseOffset);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  1,  0, BFDctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  6,  2, BFMctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 11,  7, BFMctPrefReqLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 13, 13, BFPrefIoDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 28, 28, BFPrefDramTrainMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 30, 30, BFFlushWr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 29, 29, BFFlushWrOnStpGnt);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  1,  0, BFAdapPrefMissRatio);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  3,  2, BFAdapPrefPosStep);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  5,  4, BFAdapPrefNegStep);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 10,  8, BFCohPrefPrbLmt);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xB0), 31, 0, BFOnLineSpareControl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xE8),  7, 5, BFDdrMaxRate);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00,  9,  8, BFAddrCmdDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 17, 16, BFDataDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  1,  1, BFWrtLvTrMode);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  3,  3, BFPhyFenceTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 13, 13, BFDqsRcvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x53,  8,  0, BFWrtLvErr);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 27, 25, BFD3Cmp2PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 22, 20, BFD3Cmp2NCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 17, 15, BFD3Cmp1PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 12, 10, BFD3Cmp1NCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A,  7,  5, BFD3Cmp0PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A,  2,  0, BFD3Cmp0NCal);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 20, 16, BFPhyFence);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 13, 12, BFCKETri);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 11,  8, BFODTTri);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C,  7,  0, BFChipSelTri);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D040F30, _NOT_USED_, _NOT_USED_, BFErr263);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D080F0C, _NOT_USED_, _NOT_USED_, BFErr350);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D08E000, _NOT_USED_, _NOT_USED_, BFErr322I);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D02E001, _NOT_USED_, _NOT_USED_, BFErr322II);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2030, _NOT_USED_, _NOT_USED_, BFPhyClkConfig0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2130, _NOT_USED_, _NOT_USED_, BFPhyClkConfig1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2230, _NOT_USED_, _NOT_USED_, BFPhyClkConfig2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2330, _NOT_USED_, _NOT_USED_, BFPhyClkConfig3);
+
+  LINK_TSEFO (NBRegTable, BFTwrrd, BFTwrrdHi);
+  LINK_TSEFO (NBRegTable, BFTwrwr, BFTwrwrHi);
+  LINK_TSEFO (NBRegTable, BFTrdrd, BFTrdrdHi);
+
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnParTrainHy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnParTrainHy.c
new file mode 100644
index 0000000000..fca7a61bcf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnParTrainHy.c
@@ -0,0 +1,228 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnParTrainHy.c
+ *
+ * Feature which performs Memory DQS training on each node with each node training
+ * its own memory through code running on a core in the associated processor.
+ * This way memory can be trained in parallel by more than one processor.
+ *
+ * This file contains the Hydra specific parallel training function.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/HCTRN)
+ * @e \$Revision: 54775 $ @e \$Date: 2011-06-12 21:05:26 -0600 (Sun, 12 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+  *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnhy.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "mfParallelTraining.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_HY_MNPARTRAINHY_FILECODE
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+BOOLEAN
+MemFParallelTrainingHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+STATIC
+MemConstructRemoteNBBlockHY (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       DIE_STRUCT *MCTPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr
+);
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *       This is the training function which set up the environment for remote
+ * training on the ap and launches the remote routine.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  Launch training on AP successfully.
+ *     @return          FALSE - Fail to launch training on AP.
+ */
+BOOLEAN
+MemFParallelTrainingHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  AMD_CONFIG_PARAMS *StdHeader;
+  DIE_STRUCT *MCTPtr;
+  REMOTE_TRAINING_ENV *EnvPtr;
+  AP_TASK TrainingTask;
+  UINT8 Socket;
+  UINT8 Module;
+  UINT8 APCore;
+  UINT8 p;
+  UINT32 LowCore;
+  UINT32 HighCore;
+  UINT32 BspSocket;
+  UINT32 BspModule;
+  UINT32 BspCore;
+  AGESA_STATUS Status;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  UINT16 MctDataSize;
+  StdHeader = &(NBPtr->MemPtr->StdHeader);
+  MCTPtr = NBPtr->MCTPtr;
+  Socket = MCTPtr->SocketId;
+  Module = MCTPtr->DieId;
+
+  //
+  // Allocate buffer for REMOTE_TRAINING_ENV
+  //
+  MctDataSize = MAX_DCTS_PER_NODE_HY * (
+                  sizeof (DCT_STRUCT) + (
+                    MAX_CHANNELS_PER_DCT_HY * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                  )
+                );
+  AllocHeapParams.RequestedBufferSize = MctDataSize + sizeof (REMOTE_TRAINING_ENV);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, Socket, Module, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+    EnvPtr = (REMOTE_TRAINING_ENV *) AllocHeapParams.BufferPtr;
+    AllocHeapParams.BufferPtr += sizeof (REMOTE_TRAINING_ENV);
+
+    //
+    // Setup Remote training environment
+    //
+    LibAmdMemCopy (&(EnvPtr->StdHeader), StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+    LibAmdMemCopy (&(EnvPtr->DieStruct), MCTPtr, sizeof (DIE_STRUCT), StdHeader);
+    for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+      EnvPtr->GetPlatformCfg[p] = NBPtr->MemPtr->GetPlatformCfg[p];
+    }
+    EnvPtr->ErrorHandling = NBPtr->MemPtr->ErrorHandling;
+    EnvPtr->NBBlockCtor = MemConstructRemoteNBBlockHY;
+    EnvPtr->FeatPtr = NBPtr->FeatPtr;
+    EnvPtr->HoleBase = NBPtr->RefPtr->HoleBase;
+    EnvPtr->BottomIo = NBPtr->RefPtr->BottomIo;
+    EnvPtr->UmaSize = NBPtr->RefPtr->UmaSize;
+    EnvPtr->SysLimit = NBPtr->RefPtr->SysLimit;
+    EnvPtr->TableBasedAlterations = NBPtr->RefPtr->TableBasedAlterations;
+    EnvPtr->PlatformMemoryConfiguration = NBPtr->RefPtr->PlatformMemoryConfiguration;
+
+    LibAmdMemCopy (AllocHeapParams.BufferPtr, MCTPtr->DctData, MctDataSize, StdHeader);
+
+    //
+    // Get Socket, Core of the BSP
+    //
+    IdentifyCore (StdHeader, &BspSocket, &BspModule, &BspCore, &Status);
+    EnvPtr->BspSocket = ((UINT8)BspSocket & 0x000000FF);
+    EnvPtr->BspCore = ((UINT8)BspCore & 0x000000FF);
+
+    //
+    // Set up the remote task structure
+    //
+    TrainingTask.DataTransfer.DataPtr = EnvPtr;
+    TrainingTask.DataTransfer.DataSizeInDwords = (UINT16) (AllocHeapParams.RequestedBufferSize + 3) / 4;
+    TrainingTask.DataTransfer.DataTransferFlags = 0;
+    TrainingTask.ExeFlags = 0;
+    TrainingTask.FuncAddress.PfApTaskI = (PF_AP_TASK_I)MemFParallelTraining;
+
+    //
+    // Get Target AP Core
+    //
+    GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader);
+    APCore = (UINT8) (LowCore & 0x000000FF);
+
+    //
+    // Launch Remote Training
+    //
+    ApUtilRunCodeOnSocketCore (Socket, APCore, &TrainingTask, StdHeader);
+
+    HeapDeallocateBuffer (AllocHeapParams.BufferHandle, StdHeader);
+
+    return TRUE;
+  } else {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV, NBPtr->Node, 0, 0, 0, StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocated heap space for "REMOTE_TRAINING_ENV"
+    return FALSE;
+  }
+}
+
+BOOLEAN
+STATIC
+MemConstructRemoteNBBlockHY (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       DIE_STRUCT *MCTPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr
+  )
+{
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+
+  MemNInitNBDataHy (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+  FeatPtr->InitHwRxEn (NBPtr);
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  //----------------------------------------------------------------------------
+  // Get TSC rate of the this AP
+  //----------------------------------------------------------------------------
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &NBPtr->MemPtr->StdHeader);
+  FamilySpecificServices->GetTscRate (FamilySpecificServices, &NBPtr->MemPtr->TscRate, &NBPtr->MemPtr->StdHeader);
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnS3hy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnS3hy.c
new file mode 100644
index 0000000000..3d6ec1d727
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnS3hy.c
@@ -0,0 +1,746 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mns3hy.c
+ *
+ * HY memory specific function to support S3 resume
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/HY)
+ * @e \$Revision: 50673 $ @e \$Date: 2011-04-12 21:18:06 -0600 (Tue, 12 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "mnhy.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mnS3hy.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_HY_MNS3HY_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemS3ResumeConstructNBBlockHy (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+UINT16
+STATIC
+MemNS3GetRegLstPtrHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  );
+
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstHy (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  );
+
+VOID
+STATIC
+MemNS3ExitSelfRefRegHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+STATIC
+MemNS3SetSpecialPCIRegHy (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+PCI_SPECIAL_CASE PciSpecialCaseFuncHy[] = {
+  {MemNS3GetCSRNb, MemNS3SetCSRNb},
+  {MemNS3GetCSRNb, MemNS3SetSpecialPCIRegHy},
+  {MemNS3GetBitFieldNb, MemNS3SetBitFieldNb}
+};
+
+PCI_REG_DESCRIPTOR ROMDATA S3PciPreSelfRefDescriptorHy[] = {
+  {{0, 0, 0}, FUNC_2, 0x110, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x40,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x48,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x50,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x58,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x60,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x68,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x70,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x78,  0xFFFF3F03},
+  {{0, 1, 0}, FUNC_1, 0x140, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x148, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x150, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x158, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x160, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x168, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x170, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x178, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0x44,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x4C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x54,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x5C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x64,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x6C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x74,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x7C,  0xFFFF07FF},
+  {{0, 1, 0}, FUNC_1, 0x144, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x14C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x154, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x15C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x164, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x16C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x174, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x17C, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0xF0,  0xFF00FF83},
+  {{0, 0, 0}, FUNC_1, 0x120, 0x00FFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x124, 0x07FFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x114, 0xFFFFFC00},
+  {{0, 0, 0}, FUNC_2, 0x118, 0xF773FFFF},
+  {{0, 0, 0}, FUNC_2, 0x11C, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x1B0, 0xFFD3FF3F}
+};
+
+CONST PCI_REGISTER_BLOCK_HEADER ROMDATA S3PciPreSelfRefHy = {
+  0,
+  (sizeof (S3PciPreSelfRefDescriptorHy) / sizeof (PCI_REG_DESCRIPTOR)),
+  S3PciPreSelfRefDescriptorHy,
+  NULL
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPreSelfDescriptorHy[] = {
+   // DCT 0
+  {{0, 0, 0}, FUNC_2, 0x40,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x44,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x48,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x4C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x50,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x54,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x58,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x5C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x60,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x64,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x68,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x6C,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x78,  0xFFCDBF0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x7C,  0xFFF7FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x80,  0x0000FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x84,  0x07FFEFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x88,  0xFFFFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x8C,  0xFFFF7FFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x90,  0x00FFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0xA4,  0x000F7B00, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0xA8,  0x0007FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 0, 0x180), 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 0, 0x181), 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 0, 0x182), 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 0, 0x183), 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),  0x30333333, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0x3FFFFFFF, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),  0x001FBFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),  0x003F3F3F, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig0, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig1, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig2, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig3, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  //errata 322
+  {{2, 2, 1}, DCT0,   BFErr322I, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFErr322II, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  //errata 263
+  {{2, 2, 1}, DCT0,   BFErr263, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+
+   // DCT 1
+  {{0, 0, 0}, FUNC_2, 0x140, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x144, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x148, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x14C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x150, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x154, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x158, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x15C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x160, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x164, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x168, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x16C, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x178, 0xFFCDBF0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x17C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x180, 0x0000FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x184, 0x07FFEFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x188, 0xFFFFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x18C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x190, 0x00FFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x1A4, 0x000F7B00, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x1A8, 0x0007FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 1, 0x180), 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 1, 0x181), 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 1, 0x182), 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_EXTRA_FLAG, 1, 0x183), 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00), 0x30333333, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C), 0x001FBFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04), 0x003F3F3F, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig0, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig1, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig2, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig3, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 322
+  {{2, 2, 1}, DCT1,   BFErr322I, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFErr322II, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 263
+  {{2, 2, 1}, DCT1,   BFErr263, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Restore F2x[1,0]94 right before exit self refresh
+  {{0, 0, 0}, FUNC_2, 0x94,  0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x194, 0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK}
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPreSelfRefHy = {
+  0,
+  (sizeof (S3CPciPreSelfDescriptorHy) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPreSelfDescriptorHy,
+  PciSpecialCaseFuncHy
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPostSelfDescriptorHy[] = {
+  // DCT0
+  {{2, 2, 1}, DCT0,   BFEccDLLPwrDnConf, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFEccDLLConf, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x10),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x11),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x12),  0x000001FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x13),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x14),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x15),  0x000001FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x16),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x17),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x18),  0x000001FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x19),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1B),  0x000001FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x20),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x21),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x23),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x24),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x26),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x27),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x29),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x2A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x01),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x02),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x03),  0x0000007F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x101), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x102), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x103), 0x0000007F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x201), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x202), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x203), 0x0000007F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x301), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x302), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x303), 0x0000007F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x05),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x06),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x07),  0x0000003F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x105), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x106), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x107), 0x0000003F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x205), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x206), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x207), 0x0000003F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x305), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x306), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x307), 0x0000003F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0xFFFFFFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0D),  0x23772377, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x30),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x31),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x32),  0x000000FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x33),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x34),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x35),  0x000000FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x36),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x37),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x38),  0x000000FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x39),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3B),  0x000000FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x40),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x41),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x43),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x44),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x46),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x47),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x49),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x4A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+
+    // DCT1
+  {{2, 2, 1}, DCT1,   BFEccDLLPwrDnConf, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFEccDLLConf, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x10),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x11),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x12),  0x000001FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x13),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x14),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x15),  0x000001FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x16),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x17),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x18),  0x000001FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x19),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1B),  0x000001FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x20),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x21),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x23),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x24),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x26),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x27),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x29),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x2A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x01),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x02),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x03),  0x0000007F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x101),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x102),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x103),  0x0000007F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x201),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x202),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x203),  0x0000007F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x301),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x302),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x303),  0x0000007F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x05),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x06),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x07),  0x0000003F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x105),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x106),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x107),  0x0000003F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x205),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x206),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x207),  0x0000003F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x305),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x306),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x307),  0x0000003F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0D),  0x23772377, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x30),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x31),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x32),  0x000000FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x33),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x34),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x35),  0x000000FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x36),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x37),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x38),  0x000000FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x39),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3B),  0x000000FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x40),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x41),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x43),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x44),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x46),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x47),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x49),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x4A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+
+  // DllShutDown
+  {{2, 2, 1}, DCT0,   BFPhyPLLLockTime, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyDLLLockTime, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT0,   BFDisDllShutdownSR, 0x00000001, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyPLLLockTime, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyDLLLockTime, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT1,   BFDisDllShutdownSR, 0x00000001, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Restore scrubber related registers after restoring training related registers
+  {{0, 0, 0}, FUNC_3, 0x180, 0x027F7BFF, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x44,  0xFFFFFFFE, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x58,  0x1F1F1F1F, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT0,   BFScrubReDirEn, 0x00000001, ANY_DIMM_MASK, ANY_DIMM_MASK}
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPostSelfRefHy = {
+  0,
+  (sizeof (S3CPciPostSelfDescriptorHy) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPostSelfDescriptorHy,
+  PciSpecialCaseFuncHy
+};
+
+MSR_REG_DESCRIPTOR ROMDATA S3MSRPreSelfRefDescriptorHy[] = {
+  {{0, 0, 0}, 0xC0010010, 0x00000000007F07FF},
+  {{0, 0, 0}, 0xC001001A, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001D, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001F, 0xC047F87FFF527FFF}
+};
+
+CONST MSR_REGISTER_BLOCK_HEADER ROMDATA S3MSRPreSelfRefHy = {
+  0,
+  (sizeof (S3MSRPreSelfRefDescriptorHy) / sizeof (MSR_REG_DESCRIPTOR)),
+  S3MSRPreSelfRefDescriptorHy,
+  NULL
+};
+
+VOID *MemS3RegListHy[] = {
+  (VOID *)&S3PciPreSelfRefHy,
+  NULL,
+  (VOID *)&S3CPciPreSelfRefHy,
+  (VOID *)&S3CPciPostSelfRefHy,
+  (VOID *)&S3MSRPreSelfRefHy,
+  NULL,
+  NULL,
+  NULL
+};
+
+CONST UINT16 ROMDATA SpecialCasePCIRegHy[] = {
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04)
+};
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for S3 resume
+ *
+ *     @param[in,out]   *S3NBPtr   - Pointer to MEM_NB_BLOCK.
+ *     @param[in,out]   *MemPtr  - Pointer to MEM_DATA_STRUCT.
+ *     @param[in]       NodeID   - Node ID of the target node.
+ *
+ *     @return         BOOLEAN
+ *                         TRUE - This is the correct constructor for the targeted node.
+ *                         FALSE - This isn't the correct constructor for the targeted node.
+ */
+
+BOOLEAN
+MemS3ResumeConstructNBBlockHy (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  INT32 i;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = ((S3_MEM_NB_BLOCK *)S3NBPtr)->NBPtr;
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedHy (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  InitNBRegTableHy (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->Ganged = FALSE;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_HY;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_HY;
+
+  for (i = 0; i < EnumSize; i++) {
+    NBPtr->IsSupported[i] = FALSE;
+  }
+
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) memDefTrue;
+  }
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &MemPtr->StdHeader);
+
+  NBPtr->IsSupported[CheckDllSpeedUp] = TRUE;
+  NBPtr->SwitchDCT = MemNSwitchDCTNb;
+  NBPtr->SwitchChannel = MemNSwitchChannelNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldHy;
+  NBPtr->MemNIsIdSupportedNb = MemNIsIdSupportedHy;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3ExitSelfRefReg = MemNS3ExitSelfRefRegHy;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConPCIMask = MemNS3GetConPCIMaskNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConMSRMask = (VOID (*) (MEM_NB_BLOCK*, DESCRIPTOR_GROUP*)) memDefRet;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3Resume = MemNS3ResumeNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3RestoreScrub = MemNS3RestoreScrubNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetRegLstPtr = MemNS3GetRegLstPtrHy;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetDeviceRegLst = MemNS3GetDeviceRegLstHy;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3SpecialCaseHeapSize = (sizeof (SpecialCasePCIRegHy) / sizeof (UINT16)) * sizeof (UINT32);
+
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns the register list for each device for HY
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in, out]  *DescriptPtr - Pointer to DESCRIPTOR_GROUP
+ *     @return          UINT16 - size of the device descriptor on the target node.
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  )
+{
+  UINT8 i;
+  UINT16 Size;
+  Size = 0;
+  for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+    DescriptPtr->PCIDevice[i].Type = (UINT8) (DEV_TYPE_PCI_PRE_ESR + i);
+    DescriptPtr->PCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->PCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((PCI_REGISTER_BLOCK_HEADER *) MemS3RegListHy[PCI_LST_ESR_HY - PCI_LST_ESR_HY + i] != NULL) {
+      DescriptPtr->PCIDevice[i].RegisterListID = PCI_LST_ESR_HY + i;
+      Size += sizeof (PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CPCIDevice[i].Type = (UINT8) (DEV_TYPE_CPCI_PRE_ESR + i);
+    DescriptPtr->CPCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->CPCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CPCI_REGISTER_BLOCK_HEADER *) MemS3RegListHy[CPCI_LST_ESR_HY - PCI_LST_ESR_HY + i] != NULL) {
+      DescriptPtr->CPCIDevice[i].RegisterListID = CPCI_LST_ESR_HY + i;
+      Size += sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->MSRDevice[i].Type = (UINT8) (DEV_TYPE_MSR_PRE_ESR + i);
+    DescriptPtr->MSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((MSR_REGISTER_BLOCK_HEADER *) MemS3RegListHy[MSR_LST_ESR_HY - PCI_LST_ESR_HY + i] != NULL) {
+      DescriptPtr->MSRDevice[i].RegisterListID = MSR_LST_ESR_HY + i;
+      Size += sizeof (MSR_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CMSRDevice[i].Type = (UINT8) (DEV_TYPE_CMSR_PRE_ESR + i);
+    DescriptPtr->CMSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CMSR_REGISTER_BLOCK_HEADER *) MemS3RegListHy[CMSR_LST_ESR_HY - PCI_LST_ESR_HY + i] != NULL) {
+      DescriptPtr->CMSRDevice[i].RegisterListID = CMSR_LST_ESR_HY + i;
+      Size += sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR);
+    }
+  }
+  return Size;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function return the register list according to the register ID.
+ *
+ *     @param[in]   RegisterLstID - value of the Register list ID.
+ *     @param[out]  **RegisterHeader - pointer to the address of the register list.
+ *     @return      none
+ */
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstHy (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  )
+{
+  if (RegisterLstID >= (sizeof (MemS3RegListHy) / sizeof (VOID *))) {
+    ASSERT(FALSE); // RegisterListID exceeded size of Register list
+    return AGESA_FATAL;
+  }
+  if (MemS3RegListHy[RegisterLstID] != NULL) {
+    *RegisterHeader = MemS3RegListHy[RegisterLstID];
+    return AGESA_SUCCESS;
+  }
+  ASSERT(FALSE); // Device register list error
+  return AGESA_FATAL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3SetSpecialPCIRegHy (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (Address.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_HY; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_HY);
+    // Save the value in the heap at appropriate offset based on the index
+    // of the target register in the special case array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegHy) / sizeof (UINT16)); i ++) {
+        if (SpecialCasePCIRegHy[i] == Address.Address.Register) {
+          *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2)) = *(UINT32 *) Value;
+        }
+      }
+    }
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in,out]  *NBPtr - Pointer to the northbridge block.
+ *     @param[in,out]  *StdHeader - Config handle for library and services.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3ExitSelfRefRegHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  PCI_ADDR PciAddr;
+  UINT32 Value;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+  PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+  PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+  PciAddr.Address.Function = 2;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, StdHeader) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (PciAddr.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_HY; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_HY);
+    // Restore the value one by one in the sequence of the special case register array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegHy) / sizeof (UINT16)); i ++) {
+        PciAddr.Address.Register = SpecialCasePCIRegHy[i];
+        Value = *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2));
+        MemNS3SetCSRNb (AccessS3SaveWidth32, PciAddr, &Value, StdHeader);
+      }
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnS3hy.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnS3hy.h
new file mode 100644
index 0000000000..f644e7d349
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnS3hy.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnS3hy.h
+ *
+ * S3 resume memory related function for HY.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/HY)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MNS3HY_H_
+#define _MNS3HY_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+/// ID for register list of HY
+typedef enum {
+  PCI_LST_ESR_HY,  ///< Assign 0x0000 for PCI register list for pre exit self refresh.
+  PCI_LST_HY,      ///< Assign 0x0001 for PCI register list for post exist self refresh.
+  CPCI_LST_ESR_HY, ///< Assign 0x0002 for conditional PCI register list for pre exit self refresh.
+  CPCI_LST_HY,     ///< Assign 0x0003 for conditional PCI register list for post exit self refresh.
+  MSR_LST_ESR_HY,  ///< Assign 0x0004 for MSR register list for pre exit self refresh.
+  MSR_LST_HY,      ///< Assign 0x0005 for MSR register list for post exit self refresh.
+  CMSR_LST_ESR_HY, ///< Assign 0x0006 for conditional MSR register list for pre exit self refresh.
+  CMSR_LST_HY      ///< Assign 0x0007 for conditional MSR register list for post exit self refresh.
+} RegisterListIDHy;
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif //_MNS3HY_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mndcthy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mndcthy.c
new file mode 100644
index 0000000000..f808280184
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mndcthy.c
@@ -0,0 +1,456 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mndctHy.c
+ *
+ * Northbridge DCT support for Hydra
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/HY)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnhy.h"
+#include "merrhdl.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_HY_MNDCTHY_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function programs the memory controller with configuration parameters
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_FATAL may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ *     @return          NBPtr->MCTPtr->ErrCode - Contains detailed AGESA_STATUS value
+ */
+
+BOOLEAN
+MemNAutoConfigHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 PowerDownMode;
+  UINT32 Value32;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  //======================================================================
+  // Build Dram Control Register Value (F2x78)
+  //======================================================================
+  //
+  //It is recommended that these bits remain in the default state.
+  //MemNSetBitFieldNb (NBPtr, BFRdPtrInit, 5);
+
+  MemNSetBitFieldNb (NBPtr, BFEarlyArbEn, 1);
+
+  //======================================================================
+  // Build Dram Config Lo Register Value
+  //======================================================================
+  //
+
+  if (MCTPtr->Status[SbParDimms]) {
+    //
+    // SbParDimms should be set for all DDR3 RDIMMS
+    // Cannot turn off ParEn for DDR3
+    //
+    //@attention - add debug option for parity control
+    MemNSetBitFieldNb (NBPtr, BFParEn, 1);
+  }
+
+
+  if (MCTPtr->GangedMode) {
+    MemNSetBitFieldNb (NBPtr, BFWidth128, 1);
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFX4Dimm, DCTPtr->Timings.Dimmx4Present & 0xF);
+
+  if (!MCTPtr->Status[SbRegistered]) {
+    MemNSetBitFieldNb (NBPtr, BFUnBuffDimm, 1);
+  }
+
+  if (MCTPtr->Status[SbEccDimms]) {
+    MemNSetBitFieldNb (NBPtr, BFDimmEccEn, 1);
+  }
+
+  //======================================================================
+  // Build Dram Config Hi Register Value
+  //======================================================================
+  //
+
+  MemNSetBitFieldNb (NBPtr, BFMemClkFreq, MemNGetMemClkFreqIdNb (NBPtr, DCTPtr->Timings.Speed));
+
+  if (MCTPtr->Status[SbRegistered]) {
+    if ((DCTPtr->Timings.Dimmx4Present != 0) && (DCTPtr->Timings.Dimmx8Present != 0)) {
+      MemNSetBitFieldNb (NBPtr, BFRDqsEn, 1);
+    }
+  }
+
+  if (RefPtr->EnableBankSwizzle) {
+    MemNSetBitFieldNb (NBPtr, BFBankSwizzleMode, 1);
+  }
+
+  if (DCTPtr->Timings.DimmQrPresent) {
+    if (UserOptions.CfgMemoryQuadrankType == QUADRANK_UNBUFFERED) {
+      MemNSetBitFieldNb (NBPtr, BFFourRankSoDimm, 1);
+    } else if (UserOptions.CfgMemoryQuadrankType == QUADRANK_REGISTERED) {
+      MemNSetBitFieldNb (NBPtr, BFFourRankRDimm, 1);
+    }
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFDcqBypassMax, 0xF);
+  MemNSetBitFieldNb (NBPtr, BFDcqArbBypassEn, 1);
+  //======================================================================
+  // Build Dram Config Misc Register Value
+  //======================================================================
+  //
+  if (MCTPtr->Status[SbRegistered]) {
+    if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode)!= 0) {
+      MemNSetBitFieldNb (NBPtr, BFSubMemclkRegDly, 1);
+    }
+  }
+  //======================================================================
+  // Build Dram Config Misc 2 Register Value
+  //======================================================================
+  //
+  //
+  // Ddr3FourSocketCh - Must be the same for both DCTs if either of them have > 2 Dimms
+  //
+  if ((GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID)) > 2) {
+    MemNBrdcstSetNb (NBPtr, BFDdr3FourSocketCh, 1);
+  }
+  //
+  // DTaxTxFifpWrDly
+  //
+  Value32 = MemNGetBitFieldNb (NBPtr, BFRdPtrInit);
+  if ((Value32 >= 2) && (Value32 <= 5)) {
+    MemNSetBitFieldNb (NBPtr, BFDataTxFifoWrDly, (6 - Value32));
+  }
+
+  //
+  // ProgOdtEn
+  //
+  if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode) == 1) {
+    MemNSetBitFieldNb (NBPtr, BFProgOdtEn, 1);
+  } else {
+    MemNSetBitFieldNb (NBPtr, BFProgOdtEn, 0);
+  }
+  //
+  // OdtSwizzle
+  //
+  if ((MemNGetBitFieldNb (NBPtr, BFDdr3Mode) == 0) && (MemNGetBitFieldNb (NBPtr, BFFourRankRDimm) == 0) && (RefPtr->EnablePowerDown)) {
+    PowerDownMode = (UINT8) ((UserOptions.CfgPowerDownMode == POWER_DOWN_MODE_AUTO) ? POWER_DOWN_BY_CHANNEL : UserOptions.CfgPowerDownMode);
+    IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(NBPtr->MemPtr->StdHeader));
+    if (PowerDownMode == 1) {
+      MemNSetBitFieldNb (NBPtr, BFOdtSwizzle, 1);
+    }
+  }
+
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sends an MRS command
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSendMrsCmdHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSwapBitsNb (NBPtr);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d MR%d %04x\n",
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) >> 20) & 0xF,
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) >> 16) & 0xF,
+              (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) & 0xFFFF));
+
+  // 1.Set SendMrsCmd=1
+  MemNSetBitFieldNb (NBPtr, BFSendMrsCmd, 1);
+
+  // 2.Wait for SendMrsCmd=0
+  MemNPollBitFieldNb (NBPtr, BFSendMrsCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sends an MRS command to all CS of all channels
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *DummyPtr - Unused pointer
+ *
+ *     @return    TRUE
+ */
+
+BOOLEAN
+MemNSendMrsCmdPerCsHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *DummyPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 ChipSel;
+  UINT32 Dummy;
+
+  if (!NBPtr->MCTPtr->Status[SbRegistered]) {
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+        for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+          if (NBPtr->GetSysAddr (NBPtr, ChipSel, &Dummy)) {
+            IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+            // if chip select present
+            NBPtr->TechPtr->SendAllMRCmds (NBPtr->TechPtr, ChipSel);
+            // NOTE: wait 512 clocks for DLL-relock
+            MemUWait10ns (50000, NBPtr->MemPtr);  // wait 500us
+          }
+        }
+      }
+    }
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This is a general purpose function that executes before DRAM init
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNBeforeDramInitHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct ++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      //Set PllLockTime and DllLockTime to default.
+      MemNSetBitFieldNb (NBPtr, BFPhyPLLLockTime, 0x000007D0);
+      MemNSetBitFieldNb (NBPtr, BFPhyDLLLockTime, 0x00000190);
+      MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Enable DLL Shut down
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNEnDLLShutDownHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  BOOLEAN DllShutDownEn;
+
+  DllShutDownEn = TRUE;
+  IDS_OPTION_HOOK (IDS_DLL_SHUT_DOWN, &DllShutDownEn, &(NBPtr->MemPtr->StdHeader));
+
+  if (DllShutDownEn && NBPtr->IsSupported[SetDllShutDown]) {
+    if ((NBPtr->ChannelPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_D1) != 0) {
+      for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+        MemNSwitchDCTNb (NBPtr, Dct);
+        if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+          MemNSetBitFieldNb (NBPtr, BFPhyPLLLockTime, 0x0000001C);
+          MemNSetBitFieldNb (NBPtr, BFPhyDLLLockTime, 0x0000013D);
+          MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0);
+        }
+      }
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Workaround for erratum 322 and 263
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNBeforePlatformSpecHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  // Errata 263
+  if ((NBPtr->DCTPtr->Timings.Speed == DDR533_FREQUENCY) || (NBPtr->DCTPtr->Timings.Speed == DDR667_FREQUENCY)) {
+    MemNSetBitFieldNb (NBPtr, BFErr263, 0x0800);
+  } else {
+    MemNSetBitFieldNb (NBPtr, BFErr263, 0);
+  }
+
+  // Errata 322
+  // 1.Write 00000000h to F2x[1,0]9C_xD08E000
+  MemNSetBitFieldNb (NBPtr, BFErr322I, 0);
+  // 2.If DRAM Configuration Register[MemClkFreq] (F2x[1,0]94[2:0]) is
+  //    greater than or equal to 011b (DDR-800 and higher),
+  //    then write 00000080h to F2x[1,0]9C_xD02E001,
+  //    else write 00000090h to F2x[1,0]9C_xD02E001.
+  MemNSetBitFieldNb (NBPtr, BFErr322II, (NBPtr->DCTPtr->Timings.Speed >= DDR800_FREQUENCY) ? 0x80 : 0x90);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    Initializes extended MMIO address space
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   OptParam - Optional parameter
+ *
+ *     @return    TRUE
+ */
+BOOLEAN
+MemNInitExtMMIOAddrHy  (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8  Index;
+  UINT32 Value;
+  PCI_ADDR PciAddr;
+
+  if (NBPtr->RefPtr->SysLimit >= _1TB_RJ16) {
+    // Initialize all indices of F1x114_x2 and F1x114_x3.
+    for (Index = 0; Index < 32; Index++) {
+      PciAddr = NBPtr->PciAddr;
+      PciAddr.Address.Function = 1;
+
+      PciAddr.Address.Register = 0x110;
+      Value = 0x20000000 | Index;
+      LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+
+      PciAddr.Address.Register = 0x114;
+      Value = 0;
+      LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+
+      PciAddr.Address.Register = 0x110;
+      Value = 0x30000000 | Index;
+      LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+
+      PciAddr.Address.Register = 0x114;
+      Value = 0;
+      LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+    }
+  }
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnflowhy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnflowhy.c
new file mode 100644
index 0000000000..588f27a824
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnflowhy.c
@@ -0,0 +1,134 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnflowhy.c
+ *
+ * Hydra initializer for MCT and DCT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mnhy.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_HY_MNFLOWHY_FILECODE
+/* features */
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledHy[MAX_FF_TYPES];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function initializes the platform specific block
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - AGESA_SUCCESS at least one dorm factor was found
+ *     @return          FALSE - AGESA_UNSUPPORTED - Error indicating that no form factors were found
+ */
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 f;
+  UINT8 ErrUnSuppFFCount;
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_HY; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->ChannelPtr->ChDimmValid != 0) {
+      ErrUnSuppFFCount = 0;
+      for (f = 0; f < MAX_FF_TYPES; f++) {
+        ASSERT (memPlatSpecFFInstalledHy[f] != NULL);
+        if (memPlatSpecFFInstalledHy[f] (NBPtr->MemPtr, NBPtr->ChannelPtr, NBPtr->PsPtr) == AGESA_UNSUPPORTED) {
+          ErrUnSuppFFCount++; //Count the number of AGESA_UNSUPPORTED errors
+        } else {
+          break;
+        }
+      }
+      if (ErrUnSuppFFCount == MAX_FF_TYPES) {
+        return FALSE; // No FF types are supported
+      }
+    }
+  }
+  return TRUE;
+}
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnhy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnhy.c
new file mode 100644
index 0000000000..16f6b13c94
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnhy.c
@@ -0,0 +1,496 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnhy.c
+ *
+ * Common Northbridge  functions for Hydra
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/HY)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnhy.h"
+#include "mu.h"
+#include "S3.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_HY_MNHY_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define SPLIT_CHANNEL   (UINT32) 0x20000000
+#define CHANNEL_SELECT  (UINT32) 0x10000000
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern PSO_ENTRY DefaultPlatformMemoryConfiguration[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]        *FeatPtr  - Pointer to the MEM_FEAT_BLOCK_NB
+ *     @param[in]        *SharedPtr - Pointer to the MEM_SHARED_DATA
+ *     @param[in]        NodeID  - UINT8 indicating node ID of the NB object.
+ *
+ *     @return     Boolean indicating that this is the correct memory
+ *                 controller type for the node number that was passed in.
+ */
+
+BOOLEAN
+MemConstructNBBlockHY (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 SpdSocketIndex;
+  UINT8 SpdChannelIndex;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedHy (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->SharedPtr = SharedPtr;
+
+  MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->MCTPtr->NodeId = NodeID;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+  NBPtr->VarMtrrHiMsk = GetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_HY * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_HY * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                                          )
+                                        );
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+    return FALSE;
+  }
+
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_HY;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_HY * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_HY; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_HY;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].Dct = Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_HY * sizeof (CH_DEF_STRUCT);
+  }
+  NBPtr->PSBlock = (MEM_PS_BLOCK *) AllocHeapParams.BufferPtr;
+
+  //
+  // Initialize Socket List
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_HY; Dct++) {
+    MemPtr->SocketList[MCTPtr->SocketId].ChannelPtr[(MCTPtr->DieId * 2) + Dct] = &(MCTPtr->DctData[Dct].ChData[0]);
+    MemPtr->SocketList[MCTPtr->SocketId].TimingsPtr[(MCTPtr->DieId * 2) + Dct] = &(MCTPtr->DctData[Dct].Timings);
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = (MCTPtr->DieId * 2) + Dct;
+  }
+
+  MemNInitNBDataHy (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+  FeatPtr->InitHwRxEn (NBPtr);
+  //
+  // Calculate SPD Offsets per channel and assign pointers to the data.  At this point, we calculate the Node-Dct-Channel
+  // centric offsets and store the pointers to the first DIMM of each channel in the Channel Definition struct for that
+  // channel.  This pointer is then used later to calculate the offsets to be used for each logical dimm once the
+  // dimm types(QR or not) are known. This is done in the Technology block constructor.
+  //
+  // Calculate the SpdSocketIndex separately from the SpdChannelIndex.
+  // This will facilitate modifications due to some processors that might
+  // map the DCT-CHANNEL differently.
+  //
+  SpdSocketIndex = GetSpdSocketIndex (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, &MemPtr->StdHeader);
+  //
+  // Traverse the Dct/Channel structures
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_HY; Dct++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_HY; Channel++) {
+      //
+      // Calculate the number of Dimms on this channel using the
+      //   die/dct/channel to Socket/channel conversion.
+      //
+      SpdChannelIndex = GetSpdChannelIndex (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                            NBPtr->MCTPtr->SocketId,
+                                            MemNGetSocketRelativeChannelNb (NBPtr, Dct, Channel),
+                                            &MemPtr->StdHeader);
+      NBPtr->MCTPtr->DctData[Dct].ChData[Channel].SpdPtr = &(MemPtr->SpdDataStructure[SpdSocketIndex + SpdChannelIndex]);
+    }
+  }
+
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes member functions and variables of NB block.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitNBDataHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+  NBPtr->PsPtr = NBPtr->PSBlock;
+
+  InitNBRegTableHy (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_HY;
+  NBPtr->ChannelCount = MAX_CHANNELS_PER_DCT_HY;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_HY;
+  NBPtr->Ganged = FALSE;
+  NBPtr->PosTrnPattern = POS_PATTERN_256B;
+  NBPtr->MemCleared = FALSE;
+  NBPtr->StartupSpeed = DDR800_FREQUENCY;
+  NBPtr->RcvrEnDlyLimit = 0x1FF;
+  NBPtr->DefDctSelIntLvAddr = 3;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+
+  NBPtr->SetMaxLatency = MemNSetMaxLatencyNb;
+  NBPtr->getMaxLatParams = MemNGetMaxLatParamsNb;
+  NBPtr->InitializeMCT = MemNInitializeMctHy;
+  NBPtr->FinalizeMCT = MemNFinalizeMctHy;
+  NBPtr->SendMrsCmd = MemNSendMrsCmdHy;
+  NBPtr->sendZQCmd = MemNSendZQCmdNb;
+  NBPtr->WritePattern = MemNWritePatternHy;
+  NBPtr->ReadPattern = MemNReadPatternHy;
+  NBPtr->GenHwRcvEnReads = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+  NBPtr->CompareTestPattern = MemNCompareTestPatternNb;
+  NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternNb;
+  NBPtr->StitchMemory = MemNStitchMemoryNb;
+  NBPtr->AutoConfig = MemNAutoConfigHy;
+  NBPtr->PlatformSpec = MemNPlatformSpecNb;
+  NBPtr->InitMCT = MemNInitMCTNb;
+  NBPtr->DisableDCT = MemNDisableDCTNb;
+  NBPtr->StartupDCT = MemNStartupDCTNb;
+  NBPtr->SyncTargetSpeed = MemNSyncTargetSpeedNb;
+  NBPtr->ChangeFrequency = MemNChangeFrequencyNb;
+  NBPtr->RampUpFrequency = MemNRampUpFrequencyNb;
+  NBPtr->ChangeNbFrequency = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefFalse;
+  NBPtr->ProgramCycTimings = MemNProgramCycTimingsNb;
+  NBPtr->SyncDctsReady = MemNSyncDctsReadyNb;
+  NBPtr->HtMemMapInit = MemNHtMemMapInitNb;
+  NBPtr->SyncAddrMapToAllNodes = MemNSyncAddrMapToAllNodesNb;
+  NBPtr->CpuMemTyping = MemNCPUMemTypingNb;
+  NBPtr->BeforeDqsTraining = MemNBeforeDQSTrainingHy;
+  NBPtr->AfterDqsTraining = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+  NBPtr->OtherTiming = MemNOtherTimingHy;
+  NBPtr->UMAMemTyping = MemNUMAMemTypingNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelHy;
+  NBPtr->TechBlockSwitch = MemNTechBlockSwitchNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldHy;
+  NBPtr->SetEccSymbolSize = MemNSetEccSymbolSizeNb;
+  NBPtr->TrainingFlow = (VOID (*) (MEM_NB_BLOCK *)) MemNTrainingFlowNb;
+  MemNInitNBDataNb (NBPtr);
+  NBPtr->PollBitField = MemNPollBitFieldNb;
+  NBPtr->BrdcstCheck = MemNBrdcstCheckNb;
+  NBPtr->BrdcstSet = MemNBrdcstSetNb;
+  NBPtr->GetTrainDly = MemNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemNSetTrainDlyNb;
+  NBPtr->PhyFenceTraining = MemNPhyFenceTrainingNb;
+  NBPtr->GetSysAddr = MemNGetMCTSysAddrNb;
+  NBPtr->RankEnabled = MemNRankEnabledNb;
+  NBPtr->MemNBeforeDramInitNb = MemNBeforeDramInitHy;
+  NBPtr->MemNcmnGetSetTrainDly = MemNcmnGetSetTrainDlyNb;
+  NBPtr->MemPPhyFenceTrainingNb = MemNTrainPhyFenceNb;
+  NBPtr->MemNInitPhyComp = MemNInitPhyCompHy;
+  NBPtr->MemNBeforePlatformSpecNb = MemNBeforePlatformSpecHy;
+  NBPtr->MemNPlatformSpecificFormFactorInitNb = MemNPlatformSpecificFormFactorInitHy;
+  NBPtr->MemNPFenceAdjustNb = (VOID (*) (MEM_NB_BLOCK *, INT16 *)) memDefRet;
+  NBPtr->GetTrainDlyParms = MemNGetTrainDlyParmsNb;
+  NBPtr->TrainingPatternInit = MemNTrainingPatternInitNb;
+  NBPtr->TrainingPatternFinalize = MemNTrainingPatternFinalizeNb;
+  NBPtr->GetApproximateWriteDatDelay = MemNGetApproximateWriteDatDelayNb;
+  NBPtr->CSPerChannel = MemNCSPerChannelNb;
+  NBPtr->CSPerDelay = MemNCSPerDelayNb;
+  NBPtr->FlushPattern = MemNFlushPatternNb;
+  NBPtr->MinDataEyeWidth = MemNMinDataEyeWidthNb;
+  NBPtr->MemNCapSpeedBatteryLife = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+  NBPtr->GetUmaSize = MemNGetUmaSizeNb;
+  NBPtr->GetMemClkFreqId = MemNGetMemClkFreqIdNb;
+  NBPtr->EnableSwapIntlvRgn = (VOID (*) (MEM_NB_BLOCK *, UINT32, UINT32)) memDefRet;
+  NBPtr->WaitXMemClks = MemNWaitXMemClksNb;
+  NBPtr->MemNGetDramTerm = MemNGetDramTermNb;
+  NBPtr->MemNGetDynDramTerm = MemNGetDynDramTermNb;
+  NBPtr->MemNGetMR0CL = MemNGetMR0CLNb;
+  NBPtr->MemNGetMR0WR = MemNGetMR0WRNb;
+  NBPtr->MemNSaveMR0 = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+  NBPtr->MemNGetMR2CWL = MemNGetMR2CWLNb;
+  NBPtr->AllocateC6Storage = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+
+  NBPtr->IsSupported[SetSpareEn] = TRUE;
+  NBPtr->IsSupported[CheckSpareEn] = TRUE;
+  NBPtr->IsSupported[SetDllShutDown] = TRUE;
+  NBPtr->IsSupported[CheckEccDLLPwrDnConfig] = TRUE;
+  NBPtr->IsSupported[CheckMaxDramRate] = TRUE;
+  NBPtr->IsSupported[CheckMemClkCSPresent] = TRUE;
+  NBPtr->IsSupported[CheckMaxRdDqsDlyPtr] = TRUE;
+  NBPtr->IsSupported[CheckPhyFenceTraining] = TRUE;
+  NBPtr->IsSupported[CheckSendAllMRCmds] = TRUE;
+  NBPtr->IsSupported[CheckFindPSOverideWithSocket] = TRUE;
+  NBPtr->IsSupported[CheckODTControls] = TRUE;
+  NBPtr->IsSupported[CheckDummyCLRead] = TRUE;
+  NBPtr->IsSupported[CheckSlewWithoutMarginImprv] = TRUE;
+  NBPtr->IsSupported[CheckDllSpeedUp] = TRUE;
+  NBPtr->IsSupported[ForceEnMemHoleRemapping] = TRUE;
+
+  NBPtr->FamilySpecificHook[SendMrsCmdsPerCs] = MemNSendMrsCmdPerCsHy;
+  NBPtr->FamilySpecificHook[InitExtMMIOAddr] = MemNInitExtMMIOAddrHy;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the default values in the MEM_DATA_STRUCT
+ *
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+VOID
+MemNInitDefaultsHY (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT8 Socket;
+  UINT8 Channel;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  ASSERT (MemPtr != NULL);
+  RefPtr = MemPtr->ParameterListPtr;
+
+  // Memory Map/Mgt.
+  // Mask Bottom IO with 0xF8 to force hole size to have granularity of 128MB
+  RefPtr->BottomIo = 0xE0;
+  RefPtr->UmaMode = UserOptions.CfgUmaMode;
+  RefPtr->UmaSize = UserOptions.CfgUmaSize;
+  RefPtr->MemHoleRemapping = TRUE;
+  RefPtr->LimitMemoryToBelow1Tb = UserOptions.CfgLimitMemoryToBelow1Tb;
+  //
+
+
+  // Dram Timing
+  RefPtr->UserTimingMode = UserOptions.CfgTimingModeSelect;
+  RefPtr->MemClockValue = UserOptions.CfgMemoryClockSelect;
+  for (Socket = 0; Socket < MAX_SOCKETS_SUPPORTED; Socket++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_SOCKET; Channel++) {
+      MemPtr->SocketList[Socket].ChannelPtr[Channel] = NULL;
+      MemPtr->SocketList[Socket].TimingsPtr[Channel] = NULL;
+    }
+  }
+
+  // Memory Clear
+  RefPtr->EnableMemClr = TRUE;
+
+  // TableBasedAlterations
+  RefPtr->TableBasedAlterations = NULL;
+
+  // Platform config table
+  RefPtr->PlatformMemoryConfiguration = DefaultPlatformMemoryConfiguration;
+
+  // Memory Restore
+  RefPtr->MemRestoreCtl = FALSE;
+  RefPtr->SaveMemContextCtl = FALSE;
+  AmdS3ParamsInitializer (&RefPtr->MemContext);
+
+  // Dram Configuration
+  RefPtr->EnableBankIntlv = UserOptions.CfgMemoryEnableBankInterleaving;
+  RefPtr->EnableNodeIntlv = UserOptions.CfgMemoryEnableNodeInterleaving;
+  RefPtr->EnableChannelIntlv = UserOptions.CfgMemoryChannelInterleaving;
+  RefPtr->EnableBankSwizzle = UserOptions.CfgBankSwizzle;
+  RefPtr->EnableParity = UserOptions.CfgMemoryParityEnable;
+  RefPtr->EnableOnLineSpareCtl = UserOptions.CfgOnlineSpare;
+
+  // Dram Power
+  RefPtr->EnablePowerDown = UserOptions.CfgMemoryPowerDown;
+
+  // ECC
+  RefPtr->EnableEccFeature = UserOptions.CfgEnableEccFeature;
+
+  // Vref
+  RefPtr->ExternalVrefCtl = UserOptions.CfgExternalVrefCtlFeature;
+
+  //Training Mode
+  RefPtr->ForceTrainMode = UserOptions.CfgForceTrainMode;
+}
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function writes training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Pattern[] - Pattern to write
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNWritePatternHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUWriteCachelines (Address, Pattern, ClCount);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function reads training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Buffer[] - Buffer to fill
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNReadPatternHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUReadCachelines (Buffer, Address, ClCount);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates DQS training for Server NB
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+memNEnableTrainSequenceHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN Retval;
+  Retval = TRUE;
+  if (!MemNIsIdSupportedHy (NBPtr, &(NBPtr->MemPtr->DiesPerSystem[NBPtr->MCTPtr->NodeId].LogicalCpuid))) {
+    Retval = FALSE;
+  }
+  return Retval;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnhy.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnhy.h
new file mode 100644
index 0000000000..a2379fc26d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnhy.h
@@ -0,0 +1,212 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnhy.h
+ *
+ * Northbridge Hydra
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 47408 $ @e \$Date: 2011-02-18 09:56:31 -0700 (Fri, 18 Feb 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MNHY_H_
+#define _MNHY_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_CHANNELS_PER_SOCKET_HY    4
+#define MAX_DCTS_PER_NODE_HY          2
+#define MAX_CHANNELS_PER_DCT_HY       1
+#define MAX_NODES_SUPPORTED_HY        8
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemConstructNBBlockHY (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemNInitNBDataHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitDefaultsHY (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+BOOLEAN
+MemNInitializeMctHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNFinalizeMctHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNSendMrsCmdHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNAutoConfigHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNOtherTimingHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitPhyCompHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNWritePatternHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemNReadPatternHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+InitNBRegTableHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   TSEFO NBRegTable[]
+  );
+
+UINT8
+MemNGetSocketRelativeChannelHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct,
+  IN       UINT8 Channel
+  );
+
+BOOLEAN
+MemNIsIdSupportedHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+VOID
+MemNBeforeDramInitHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNEnDLLShutDownHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemNCmnGetSetFieldHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+VOID
+MemNBeforePlatformSpecHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+memNEnableTrainSequenceHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNSendMrsCmdPerCsHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *DummyPtr
+  );
+
+BOOLEAN
+MemNInitExtMMIOAddrHy  (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+VOID
+MemNBeforeDQSTrainingHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MNHY_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnidendimmhy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnidendimmhy.c
new file mode 100644
index 0000000000..fdfa5ead3c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnidendimmhy.c
@@ -0,0 +1,140 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnidendimmhy.c
+ *
+ * Hy northbridge constructor for dimm identification translator.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/HY)
+ * @e \$Revision: 45911 $ @e \$Date: 2011-01-24 13:55:11 -0700 (Mon, 24 Jan 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnhy.h"
+#include "mfidendimm.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_HY_MNIDENDIMMHY_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for dimm identification translator
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in,out]   NodeID   - ID of current node to construct
+ *     @return          TRUE     - This is the correct constructor for the targeted node.
+ *     @return          FALSE    - This isn't the correct constructor for the targeted node.
+ */
+
+BOOLEAN
+MemNIdentifyDimmConstructorHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedHy (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_HY;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_HY;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Ganged = FALSE;
+  InitNBRegTableHy (NBPtr, NBPtr->NBRegTable);
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldHy;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelHy;
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnmcthy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnmcthy.c
new file mode 100644
index 0000000000..91580b745d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnmcthy.c
@@ -0,0 +1,213 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnmcthy.c
+ *
+ * Northbridge Hydra MCT supporting functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/HY)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnhy.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_HY_MNMCTHY_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets final values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNFinalizeMctHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  DRAM_PREFETCH_MODE DramPrefetchMode;
+  S_UINT64 SMsr;
+  UINT16 Speed;
+  UINT32 ExtMctCfgLoRegVal;
+
+  MemPtr = NBPtr->MemPtr;
+  DramPrefetchMode = MemPtr->PlatFormConfig->PlatformProfile.AdvancedPerformanceProfile.DramPrefetchMode;
+  Speed = NBPtr->DCTPtr->Timings.Speed;
+  MemNSetBitFieldNb (NBPtr, BFMctCfgHiReg, (!NBPtr->Ganged) ? 0x2CE00F60 : 0x2CE00F40);
+
+  ExtMctCfgLoRegVal = MemNGetBitFieldNb (NBPtr, BFExtMctCfgLoReg);
+  ExtMctCfgLoRegVal |= (NBPtr->Ganged) ? 0x0FC00001 : 0x0FC01001;
+
+  ExtMctCfgLoRegVal &= 0x0FFFFFFF;
+  if (Speed == DDR667_FREQUENCY) {
+    ExtMctCfgLoRegVal |= 0x40000000;
+  } else if (Speed == DDR800_FREQUENCY) {
+    ExtMctCfgLoRegVal |= 0x50000000;
+  } else if (Speed == DDR1066_FREQUENCY) {
+    ExtMctCfgLoRegVal |= 0x60000000;
+  } else if (Speed == DDR1333_FREQUENCY) {
+    ExtMctCfgLoRegVal |= 0x80000000;
+  } else {
+    ExtMctCfgLoRegVal |= 0x90000000;
+  }
+  //
+  // PrefFiveConf, PrefFourConf
+  //
+  ExtMctCfgLoRegVal |= 0x0FC00000;
+  //
+  // EnSplitDctLimits
+  //
+  if (!NBPtr->Ganged) {
+    ExtMctCfgLoRegVal |= 0x00001000;
+  }
+  MemNSetBitFieldNb (NBPtr, BFExtMctCfgLoReg, ExtMctCfgLoRegVal);
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_IO || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefIoDis, 1);
+  }
+
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_CPU || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefCpuDis, 1);
+  }
+
+  if (NBPtr->Node == BSP_DIE) {
+    if (!NBPtr->ClToNbFlag) {
+      LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+      SMsr.lo &= ~((UINT32)1 << 15);                // ClLinesToNbDis
+      LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    }
+
+    LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    SMsr.hi &= ~((UINT32)1 << (48 - 32));               // WbEnhWsbDis
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  }
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets initial values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNInitializeMctHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+  if (NBPtr->Node == BSP_DIE) {
+    LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    if (SMsr.lo & ((UINT32)1 << 15)) {
+      NBPtr->ClToNbFlag = 1;
+    }
+    SMsr.lo |= (UINT32)1 << 15;                   // ClLinesToNbDis
+    LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+    LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    SMsr.hi |= (UINT32)1 << (48 - 32);              // WbEnhWsbDis
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnothy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnothy.c
new file mode 100644
index 0000000000..1c6cab087c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnothy.c
@@ -0,0 +1,247 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnothy.c
+ *
+ * Northbridge Non-SPD timings for Hydra
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/HY)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnhy.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_HY_MNOTHY_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemNSetOtherTimingHY (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+UINT32
+STATIC
+MemNGetODTDelaysHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+*/
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the non-SPD timings
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNOtherTimingHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSwitchDCTNb (NBPtr, 0);
+  if (NBPtr->DCTPtr->Timings.DctDimmValid > 0) {
+    MemNSetOtherTimingHY (NBPtr);
+    MemNPowerDownCtlNb (NBPtr);
+    MemNEnDLLShutDownHy (NBPtr);
+  }
+
+  MemNSwitchDCTNb (NBPtr, 1);
+  if ((NBPtr->DCTPtr->Timings.DctDimmValid > 0) && (NBPtr->MCTPtr->GangedMode == FALSE)) {
+    MemNSetOtherTimingHY (NBPtr);
+    MemNPowerDownCtlNb (NBPtr);
+    MemNEnDLLShutDownHy (NBPtr);
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the non-SPD timings  in PCI registers
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNSetOtherTimingHY (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+
+  MemNSetBitFieldNb (NBPtr, BFTrdrd, MemNGetTrdrdNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTwrwr, MemNGetTwrwrNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTwrrd, MemNGetTwrrdNb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTrwtTO, MemNGetTrwtTONb (NBPtr));
+  MemNSetBitFieldNb (NBPtr, BFTrwtWB, MemNGetTrwtWBNb (NBPtr));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the ODT delays
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+/*
+UINT32
+STATIC
+MemNGetODTDelaysHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  INT8 Ld;
+  UINT32 ODTDelays;
+  //
+  // On revision D processors, the BIOS must additionally configure the ODT pattern
+  // and the ODT switching delays.
+  //
+  // Program F2x[1, 0]9C_x83 DRAM Phy ODT Assertion Control Register based on Burst length.
+  //     -Read the Burst Length from F2x[1, 0]84[BurstCtrl].
+  //     -Value of 2, BL = 4 else assume BL=8.
+  //     -Initialize ODTDelays based on BL value
+  //     -WrOdtOnDuration [14:12] = BL / 2 + 1
+  //     -WrOdtTrnOnDly [10:8] = 0
+  //     -RdOdtOnDuration [6:4] = BL / 2 + 1
+  //
+  ODTDelays = (MemNGetBitFieldNb (NBPtr, BFBurstCtrl) == 2) ? 0x00003030 : 0x00005050;
+
+  // RdOdtTrnOnDly [3:0] < (CL-CWL) or (CL-CWL - 1)
+  // See BKDG F2x[1, 0]9C_x83 DRAM Phy ODT Assertion Control Register [3:0]
+  Ld = ((INT8)MemNGetBitFieldNb (NBPtr, BFTcl) + 1) - ((INT8)MemNGetBitFieldNb (NBPtr, BFTcwl) + 5);
+  if (Ld < 0) {
+    Ld = 0;
+  }
+  if (Ld > 7) {
+    Ld = 7;
+  }
+  ODTDelays += Ld;
+  return ODTDelays;
+}
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function enables power down mode
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+/*
+VOID
+STATIC
+MemNPowerDownCtlHY (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_PARAMETER_STRUCT *RefPtr;
+  UINT8 PowerDownMode;
+
+  RefPtr = NBPtr->RefPtr;
+
+  // we can't enable powerdown mode when doing WL
+  if (RefPtr->EnablePowerDown) {
+    MemNSetBitFieldNb (NBPtr, BFPowerDownEn, 1);
+    PowerDownMode = (UINT8) UserOptions.CfgPowerDownMode;
+    IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(NBPtr->MemPtr->StdHeader));
+    if (PowerDownMode) {
+      MemNSetBitFieldNb (NBPtr, BFPowerDownMode, 1);
+    }
+  }
+}
+*/
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnphyhy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnphyhy.c
new file mode 100644
index 0000000000..d7b587b492
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnphyhy.c
@@ -0,0 +1,238 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnphyHy.c
+ *
+ * Northbridge Phy support for Hydra
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/HY)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "ma.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnhy.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_HY_MNPHYHY_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the DDR phy compensation logic
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitPhyCompHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST UINT8 TableCompRiseSlew20x[] = {7, 3, 2, 2};
+  CONST UINT8 TableCompRiseSlew15x[] = {7, 7, 3, 2};
+  CONST UINT8 TableCompFallSlew20x[] = {7, 5, 3, 2};
+  CONST UINT8 TableCompFallSlew15x[] = {7, 7, 5, 3};
+  UINT8 i;
+  UINT8 j;
+  UINT8 CurrDct;
+  UINT8 MaxDimmsPerChannel;
+  UINT8 *DimmsPerChPtr;
+
+  CurrDct = NBPtr->Dct;
+
+  //
+  // Get Platform Information
+  //
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmsPerChannel = *DimmsPerChPtr;
+  } else {
+    MaxDimmsPerChannel = 2;
+  }
+
+  // 1. BIOS disables the phy compensation register by programming F2x9C_x08[DisAutoComp]=1
+  // 2. BIOS waits 5 us for the disabling of the compensation engine to complete.
+  // DisAutoComp will be cleared after Dram init has completed
+  //
+  MemNSwitchDCTNb (NBPtr, 0);
+  MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 1);
+  MemUWait10ns (500, NBPtr->MemPtr);
+  MemNSwitchDCTNb (NBPtr, CurrDct);
+
+  // 3. For each normalized driver strength code read from
+  // F2x[1, 0]9C_x00[AddrCmdDrvStren], program the
+  // corresponding 3 bit predriver code in F2x9C_x0A[D3Cmp1NCal, D3Cmp1PCal].
+  //
+  // 4. For each normalized driver strength code read from
+  // F2x[1, 0]9C_x00[DataDrvStren], program the corresponding
+  // 3 bit predriver code in F2x9C_x0A[D3Cmp0NCal, D3Cmp0PCal, D3Cmp2NCal,
+  // D3Cmp2PCal].
+  //
+  j = (UINT8) MemNGetBitFieldNb (NBPtr, BFAddrCmdDrvStren);
+  i = (UINT8) MemNGetBitFieldNb (NBPtr, BFDataDrvStren);
+
+  MemNSwitchDCTNb (NBPtr, 0);
+  ASSERT (j <= 3);
+  MemNSetBitFieldNb (NBPtr, BFD3Cmp1NCal, TableCompRiseSlew20x[j]);
+  MemNSetBitFieldNb (NBPtr, BFD3Cmp1PCal, TableCompFallSlew20x[j]);
+
+  ASSERT (i <= 3);
+  MemNSetBitFieldNb (NBPtr, BFD3Cmp0NCal, TableCompRiseSlew15x[i]);
+  MemNSetBitFieldNb (NBPtr, BFD3Cmp0PCal, TableCompFallSlew15x[i]);
+  MemNSetBitFieldNb (NBPtr, BFD3Cmp2NCal, TableCompRiseSlew15x[i]);
+  MemNSetBitFieldNb (NBPtr, BFD3Cmp2PCal, TableCompFallSlew15x[i]);
+
+  //
+  // Special Case for certain configs
+  //
+  // 3DPCH Fully populated.
+  if ((MaxDimmsPerChannel == 3) && (NBPtr->ChannelPtr->Dimms == 3)) {
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp0NCal, 3);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp0PCal, 5);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp2NCal, 3);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp2PCal, 5);
+  }
+
+  MemNSwitchDCTNb (NBPtr, CurrDct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This is a general purpose function that executes before DRAM training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNBeforeDQSTrainingHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 ChipSel;
+  UINT32 TestAddrRJ16;
+  UINT32 RealAddr;
+
+  MemTBeginTraining (NBPtr->TechPtr);
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+        if (MemNGetMCTSysAddrNb (NBPtr, ChipSel, &TestAddrRJ16)) {
+
+          RealAddr = MemUSetUpperFSbase (TestAddrRJ16, NBPtr->MemPtr);
+
+          MemUDummyCLRead (RealAddr);
+
+          MemNSetBitFieldNb (NBPtr, BFErr350, 0x8000);
+          MemUWait10ns (60, NBPtr->MemPtr);   // Wait 300ns
+          MemNSetBitFieldNb (NBPtr, BFErr350, 0x0000);
+          MemUWait10ns (400, NBPtr->MemPtr);  // Wait 2us
+          MemUProcIOClFlush (TestAddrRJ16, 1, NBPtr->MemPtr);
+          break;
+        }
+      }
+    }
+    if (NBPtr->IsSupported[CheckEccDLLPwrDnConfig]) {
+      if (!NBPtr->MCTPtr->Status[SbEccDimms]) {
+        MemNSetBitFieldNb (NBPtr, BFEccDLLPwrDnConf, 0x0010);
+      }
+      if (NBPtr->DCTPtr->Timings.Dimmx4Present == 0) {
+        MemNSetBitFieldNb (NBPtr, BFEccDLLConf, 0x0080);
+      }
+    }
+  }
+
+  MemTEndTraining (NBPtr->TechPtr);
+
+  MemNSetBitFieldNb (NBPtr, BFDisDatMsk, 1);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnprotohy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnprotohy.c
new file mode 100644
index 0000000000..62288a4fe6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnprotohy.c
@@ -0,0 +1,66 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnprotohy.c
+ *
+ * Northbridge support functions for Errata and early samples
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/HY)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+
+#include "AGESA.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_HY_MNPROTOHY_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnreghy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnreghy.c
new file mode 100644
index 0000000000..3b8eda1654
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/HY/mnreghy.c
@@ -0,0 +1,639 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnreghy.c
+ *
+ * Common Northbridge register related functions for Hydra
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/HY)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnhy.h"
+#include "merrhdl.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_HY_MNREGHY_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemNIsIdSupportedHy
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ *     @return          TRUE -  This node is a Hydra.
+ *     @return          FALSE - This node is not a Hydra.
+ *
+ */
+BOOLEAN
+MemNIsIdSupportedHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+  if (((LogicalIdPtr->Family & AMD_FAMILY_10_HY) != 0)
+      && ((LogicalIdPtr->Revision & AMD_F10_HY_ALL) != 0)) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *      This function calculates the memory channel index relative to the
+ *      socket, taking the Die number, the Dct, and the channel.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Dct
+ *     @param[in] Channel
+ *
+ */
+UINT8
+MemNGetSocketRelativeChannelHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct,
+  IN       UINT8 Channel
+  )
+{
+  return ((NBPtr->MCTPtr->DieId * MAX_DCTS_PER_NODE_HY) + Dct);
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Bit Field to be programmed
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+MemNCmnGetSetFieldHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  TSEFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT8 IsLinked;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+
+  Value = 0;
+  if ((FieldName < BFEndOfList) && (FieldName >= 0)) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = (UINT8) TSEFO_TYPE (Address);
+      IsLinked = (UINT8) TSEFO_LINKED (Address);
+
+      // If Fn2 and DCT1 selected, set Address to be 1xx
+      if ((Type == NB_ACCESS) && ((Address & 0xF000) == 0x2000) && NBPtr->Dct) {
+        if (!NBPtr->Ganged || (Address & 0xFF) == 0x98 || (Address & 0xFF) == 0x9C) {
+          Address |= 0x0100;
+        }
+      }
+
+      ASSERT ((Address & ((UINT32) 1) << 28) == 0);   // Phy direct access method is not supported
+
+      if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) {
+        // Special DCT Phy access
+        Address &= 0x0FFFFFFF;
+        Lowbit = 0;
+        Highbit = 16;
+        IsLinked = 0;
+      } else {
+        // Normal DCT Phy access
+        Address = TSEFO_OFFSET (Address);
+      }
+
+      if (Type == NB_ACCESS) {
+        PciAddr.AddressValue = Address;
+        PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+        PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+        PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+        Address = PciAddr.AddressValue;
+        LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+        if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) &&
+            (FieldName != BFDctExtraDataReg) && (FieldName != BFDctExtraOffsetReg)) {
+          IDS_HDT_CONSOLE (MEM_GETREG, "~Fn%d_%03x = %x\n", (Address >> 12) & 0xF, Address & 0xFFF, Value);
+        }
+      } else if (Type == DCT_PHY_ACCESS) {
+        MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+        MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+        Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+        IDS_HDT_CONSOLE (MEM_GETREG, "~Fn2_%d9C_%x = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Value);
+      } else if (Type == DCT_EXTRA) {
+        MemNSetBitFieldNb (NBPtr, BFDctExtraOffsetReg, Address);
+        MemNPollBitFieldNb (NBPtr, BFDctExtraAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+        Value = MemNGetBitFieldNb (NBPtr, BFDctExtraDataReg);
+        IDS_HDT_CONSOLE (MEM_GETREG, "~Fn2_%dF4_%x = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Value);
+      } else {
+        IDS_ERROR_TRAP;
+      }
+
+      if (IsSet) {
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        } else {
+          Mask = (UINT32)0xFFFFFFFF;
+        }
+        Value &= ~(Mask << Lowbit);
+        Value |= (Field & Mask) << Lowbit;
+
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+          if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) &&
+              (FieldName != BFDctExtraDataReg) && (FieldName != BFDctExtraOffsetReg)) {
+            IDS_HDT_CONSOLE (MEM_SETREG, "~Fn%d_%03x [%d:%d] = %x\n", (Address >> 12) & 0xF, Address & 0xFFF, Highbit, Lowbit, Field);
+          }
+        } else if (Type == DCT_PHY_ACCESS) {
+          MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+          MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+          IDS_HDT_CONSOLE (MEM_SETREG, "~Fn2_%d9C_%x [%d:%d] = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Highbit, Lowbit, Field);
+        } else if (Type == DCT_EXTRA) {
+          MemNSetBitFieldNb (NBPtr, BFDctExtraDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+          MemNSetBitFieldNb (NBPtr, BFDctExtraOffsetReg, Address);
+          MemNPollBitFieldNb (NBPtr, BFDctExtraAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+          IDS_HDT_CONSOLE (MEM_SETREG, "~Fn2_%dF4_%x [%d:%d] = %x\n", NBPtr->Dct, Address & 0x0FFFFFFF, Highbit, Lowbit, Field);
+        } else {
+          IDS_ERROR_TRAP;
+        }
+        if (IsLinked) {
+          MemNCmnGetSetFieldHy (NBPtr, 1, FieldName + 1, Field >> (Highbit - Lowbit + 1));
+        }
+      } else {
+        Value = Value >> Lowbit;  // Shift
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        }
+        if (IsLinked) {
+          Value |= MemNCmnGetSetFieldHy (NBPtr, 0, FieldName + 1, 0) << (Highbit - Lowbit + 1);
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes bit field translation table
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   NBRegTable[]  - Pointer to the bit field data structure
+ *
+ */
+
+VOID
+InitNBRegTableHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   TSEFO NBRegTable[]
+  )
+{
+  UINT16 i;
+
+  // Allocate heap for NB register table
+  if (!MemNAllocateNBRegTableNb (NBPtr, NbRegTabHY)) {
+    return;     // escape if fails
+  }
+  NBRegTable = NBPtr->NBRegTable;
+
+  for (i = 0; i < BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31,  0, BFDevVendorIDReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  2,  0, BFNodeID);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  6,  4, BFNodeCnt);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x48), 31, 0, BFDramBaseReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x4C), 31, 0, BFDramLimitReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x50), 31, 0, BFDramBaseReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x54), 31, 0, BFDramLimitReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x58), 31, 0, BFDramBaseReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x5C), 31, 0, BFDramLimitReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x60), 31, 0, BFDramBaseReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x64), 31, 0, BFDramLimitReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x68), 31, 0, BFDramBaseReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x6C), 31, 0, BFDramLimitReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x70), 31, 0, BFDramBaseReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x74), 31, 0, BFDramLimitReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x78), 31, 0, BFDramBaseReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x7C), 31, 0, BFDramLimitReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 0, BFDramHoleAddrReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x140), 7, 0, BFDramBaseHiReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x144), 7, 0, BFDramLimitHiReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x148), 7, 0, BFDramBaseHiReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x14C), 7, 0, BFDramLimitHiReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x150), 7, 0, BFDramBaseHiReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x154), 7, 0, BFDramLimitHiReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x158), 7, 0, BFDramBaseHiReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x15C), 7, 0, BFDramLimitHiReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x160), 7, 0, BFDramBaseHiReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x164), 7, 0, BFDramLimitHiReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x168), 7, 0, BFDramBaseHiReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x16C), 7, 0, BFDramLimitHiReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x170), 7, 0, BFDramBaseHiReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x174), 7, 0, BFDramLimitHiReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x178), 7, 0, BFDramBaseHiReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x17C), 7, 0, BFDramLimitHiReg7);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 24, BFDramHoleBase);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 15,  7, BFDramHoleOffset);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0),  1,  1, BFDramMemHoistValid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0),  0,  0, BFDramHoleValid);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x120), 20,  0, BFDramBaseAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x120), 23, 21, BFDramIntlvSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x124), 20,  0, BFDramLimitAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x124), 26, 21, BFDramIntlvEn);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31,  0, BFDramControlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31,  0, BFDramMRSReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31,  0, BFDramTimingHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA0), 31,  0, BFDramConfigMiscReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 31,  0, BFDramCtrlMiscReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF0), 31,  0, BFDctExtraOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF4), 31,  0, BFDctExtraDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF0), 31, 31, BFDctExtraAccessDone);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 31,  0, BFMctCfgHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x118), 31,  0, BFMctCfgLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 31,  0, BFExtMctCfgLoReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x40), 31,  0, BFMcaNbCtlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44), 22, 22, BFDramEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44),  2,  2, BFSyncOnUcEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x180), 25, 25, BFEccSymbolSize);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x48), 31,  0, BFMcaNbStatusLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x4C), 31,  0, BFMcaNbStatusHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58),  4,  0, BFDramScrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 12,  8, BFL2Scrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 20, 16, BFDcacheScrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 28, 24, BFL3Scrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C),  0,  0, BFScrubReDirEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C), 31,  0, BFScrubAddrLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x60), 31,  0, BFScrubAddrHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x8C),  4,  4, BFDisDatMsk);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4),  4,  0, BFNbFid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4), 13, 13, BFMTC1eEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xE8), 25, 25, BFL3Capable);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x188), 8,  8, BFReserved00B);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 13,  8, BFNonSPDHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78),  3,  0, BFRdPtrInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78),  9,  8, BFTwrrdHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 11, 10, BFTwrwrHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 13, 12, BFTrdrdHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 16, 16, BFReserved001);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 19, 19, BFEarlyArbEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 24, 24, BFSendPchgAll);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 25, 25, BFSendAutoRefresh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFMrsLevel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  1,  0, BFBurstCtrl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  3,  2, BFDrvImpCtrl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  9,  7, BFDramTerm_DDR3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 13, 13, BFQoff);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 18, 18, BFASR);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 19, 19, BFSRT);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 22, 20, BFTcwl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 23, 23, BFPchgPDModeSel);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  6,  4, BFTwrDDR3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  3,  0, BFTcl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  6,  4, BFTrcd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88),  9,  7, BFTrp);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 11, 10, BFTrtp);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 15, 12, BFTras);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 20, 16, BFTrc);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 21, 20, BFTwr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 23, 22, BFTrrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31, 24, BFMemClkDis);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 15,  0, BFNonSPD);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  3,  0, BFTrwtWB);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  7,  4, BFTrwtTO);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C),  9,  8, BFTwtr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 11, 10, BFTwrrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 13, 12, BFTwrwr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 15, 14, BFTrdrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 17, 16, BFTref);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 22, 20, BFTrfc0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 25, 23, BFTrfc1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 28, 26, BFTrfc2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31, 29, BFTrfc3);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  0,  0, BFInitDram);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  1,  1, BFExitSelfRef);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  5,  4, BFDramTerm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  8,  8, BFParEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 10, 10, BFBurstLength32);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 11, 11, BFWidth128);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 15, 12, BFX4Dimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 17, 17, BFEnterSelfRef);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 19, 19, BFDimmEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 23, 23, BFForceAutoPchg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 27, 27, BFDisDllShutdownSR);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  2,  0, BFMemClkFreq);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  3,  3, BFMemClkFreqVal);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  8,  8, BFDdr3Mode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  9,  9, BFLegacyBiosMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 12, 12, BFRDqsEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 15, 15, BFPowerDownEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 16, 16, BFPowerDownMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 17, 17, BFFourRankSoDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 19, 19, BFDcqArbBypassEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 18, 18, BFFourRankRDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 20, 20, BFSlowAccessMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 21, 21, BFFreqChgInProg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 22, 22, BFBankSwizzleMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 27, 24, BFDcqBypassMax);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31, 28, BFFourActWindow);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4),  8,  8, BFODTSEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4), 14, 12, BFCmdThrottleMode);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  2,  2, BFDdr3FourSocketCh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  5,  5, BFSubMemclkRegDly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  6,  6, BFOdtSwizzle);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  7,  7, BFProgOdtEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15,  8, BFCtrlWordCS);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 18, 16, BFDataTxFifoWrDly);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  0,  0, BFDctSelHiRngEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  1,  1, BFDctSelHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  2,  2, BFDctSelIntLvEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  3,  3, BFMemClrInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  4,  4, BFDctGangEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  5,  5, BFDctDatIntLv);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  7,  6, BFDctSelIntLvAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  8,  8, BFDramEnabled);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  9,  9, BFMemClrBusy);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 10, 10, BFMemCleared);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 11, BFDctSelBaseAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 10, BFDctSelBaseOffset);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  1,  0, BFDctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  6,  2, BFMctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 11,  7, BFMctPrefReqLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 13, 13, BFPrefIoDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 28, 28, BFPrefDramTrainMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 30, 30, BFFlushWr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 29, 29, BFFlushWrOnStpGnt);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  1,  0, BFAdapPrefMissRatio);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  3,  2, BFAdapPrefPosStep);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  5,  4, BFAdapPrefNegStep);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 10,  8, BFCohPrefPrbLmt);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 12, 12, BFEnSplitDctLimits);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 24, 22, BFPrefFourConf);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 27, 25, BFPrefFiveConf);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xB0), 31, 0, BFOnLineSpareControl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xE8),  7, 5, BFDdrMaxRate);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00,  9,  8, BFAddrCmdDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 17, 16, BFDataDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  1,  1, BFWrtLvTrMode);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  3,  3, BFPhyFenceTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 13, 13, BFDqsRcvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x53,  8,  0, BFWrtLvErr);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 27, 25, BFD3Cmp2PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 22, 20, BFD3Cmp2NCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 17, 15, BFD3Cmp1PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A, 12, 10, BFD3Cmp1NCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A,  7,  5, BFD3Cmp0PCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0A,  2,  0, BFD3Cmp0NCal);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 20, 16, BFPhyFence);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 13, 12, BFCKETri);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 11,  8, BFODTTri);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C,  7,  0, BFChipSelTri);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x602, 31,  0, BFUSPLLCtlAll);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x603, 31,  0, BFDSPLLCtlAll);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x606,  0,  0, BFUSNibbleAlignEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x690,  2,  2, BFChnLinitClkEn);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA,  0x180, 31, 0, BFPhyRODTCSLow);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA,  0x181, 31, 0, BFPhyRODTCSHigh);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA,  0x182, 31, 0, BFPhyWODTCSLow);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA,  0x183, 31, 0, BFPhyWODTCSHigh);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x06, 3, 0, BFTrdrdSD);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x16, 3, 0, BFTwrwrSD);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000, 31, 30, BFTSLinkSelect);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000,  9,  9, BFTS2BitLockEn);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000,  8,  8, BFTS2En);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000,  4,  4, BFTS1En);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000,  1,  1, BFTS0LinkStarEn);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800000,  0,  0, BFTS0En);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800002, 15,  0, BFLinkTrainData);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800010, 17, 17, BFRstRxFifoPtrs);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800010, 16, 16, BFRxFifoPtrInit);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800010,  1,  1, BFRstTxFifoPtrs);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800010,  0,  0, BFTxFifoPtrInit);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800012, 31, 24, BFLpbkCount);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800012, 21, 20, BFLpbkMap);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800012, 16, 16, BFSendLpbkMaintCmd);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800012, 15,  0, BFLpbkData);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800014, 20, 16, BFMbRdPtrEn);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800014,  9,  4, BFLnkLpBkLat);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800014,  1,  1, BFLpbkRndTripLatDone);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800014,  0,  0, BFLnkLatTrainEn);
+
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800020,  1,  1, BFDsPhyReset);
+  MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x800020,  0,  0, BFLinkReset);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D040F30, _NOT_USED_, _NOT_USED_, BFErr263);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D080F0C, _NOT_USED_, _NOT_USED_, BFErr350);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F0013, _NOT_USED_, _NOT_USED_, BFEccDLLConf);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F0830, _NOT_USED_, _NOT_USED_, BFEccDLLPwrDnConf);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D080F11, _NOT_USED_, _NOT_USED_, BFPhy0x0D080F11);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D080F10, _NOT_USED_, _NOT_USED_, BFPhy0x0D080F10);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D088F30, _NOT_USED_, _NOT_USED_, BFPhy0x0D088F30);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D08C030, _NOT_USED_, _NOT_USED_, BFPhy0x0D08C030);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D082F30, _NOT_USED_, _NOT_USED_, BFPhy0x0D082F30);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2030, _NOT_USED_, _NOT_USED_, BFPhyClkConfig0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2130, _NOT_USED_, _NOT_USED_, BFPhyClkConfig1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2230, _NOT_USED_, _NOT_USED_, BFPhyClkConfig2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2330, _NOT_USED_, _NOT_USED_, BFPhyClkConfig3);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D08E000, _NOT_USED_, _NOT_USED_, BFErr322I);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D02E001, _NOT_USED_, _NOT_USED_, BFErr322II);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0FE006, _NOT_USED_, _NOT_USED_, BFPhyPLLLockTime);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0FE007, _NOT_USED_, _NOT_USED_, BFPhyDLLLockTime);
+
+  LINK_TSEFO (NBRegTable, BFTwrrd, BFTwrrdHi);
+  LINK_TSEFO (NBRegTable, BFTwrwr, BFTwrwrHi);
+  LINK_TSEFO (NBRegTable, BFTrdrd, BFTrdrdHi);
+
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnS3or.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnS3or.h
new file mode 100644
index 0000000000..e40b25c739
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnS3or.h
@@ -0,0 +1,85 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnS3or.h
+ *
+ * S3 resume memory related function for OR.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/OR)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MNS3OR_H_
+#define _MNS3OR_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+/// ID for register list of OR
+typedef enum {
+  PCI_LST_ESR_OR,  ///< Assign 0x0000 for PCI register list for pre exit self refresh.
+  PCI_LST_OR,      ///< Assign 0x0001 for PCI register list for post exist self refresh.
+  CPCI_LST_ESR_OR, ///< Assign 0x0002 for conditional PCI register list for pre exit self refresh.
+  CPCI_LST_OR,     ///< Assign 0x0003 for conditional PCI register list for post exit self refresh.
+  MSR_LST_ESR_OR,  ///< Assign 0x0004 for MSR register list for pre exit self refresh.
+  MSR_LST_OR,      ///< Assign 0x0005 for MSR register list for post exit self refresh.
+  CMSR_LST_ESR_OR, ///< Assign 0x0006 for conditional MSR register list for pre exit self refresh.
+  CMSR_LST_OR      ///< Assign 0x0007 for conditional MSR register list for post exit self refresh.
+} RegisterListIDOr;
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define SET_S3_NB_PSTATE_OFFSET(Offset, NBPstate) ((NBPstate << 10) | Offset)
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif //_MNS3OR_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mndctor.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mndctor.c
new file mode 100644
index 0000000000..5283ecd363
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mndctor.c
@@ -0,0 +1,975 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mndctOr.c
+ *
+ * Northbridge DCT support for Orochi
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/OR)
+ * @e \$Revision: 60556 $ @e \$Date: 2011-10-17 20:19:58 -0600 (Mon, 17 Oct 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnor.h"
+#include "merrhdl.h"
+#include "cpuFamRegisters.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuCommonF15Utilities.h"
+#include "F15PackageType.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_OR_MNDCTOR_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+#define MAX_RD_DQS_DLY 0x1F
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT32
+STATIC
+MemNTotalSyncComponentsOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function programs the memory controller with configuration parameters
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_FATAL may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ *     @return          NBPtr->MCTPtr->ErrCode - Contains detailed AGESA_STATUS value
+ */
+
+BOOLEAN
+MemNAutoConfigOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 i;
+  UINT8 NumDimmslots;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  MEM_PS_BLOCK * PsPtr;
+  BOOLEAN ExtraAddrBits;
+  BOOLEAN RankMultEn;
+  UINT8 ROOD;
+
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  PsPtr = NBPtr->PsPtr;
+
+  ExtraAddrBits = FALSE;
+  RankMultEn = FALSE;
+
+  ROOD = DEFAULT_RD_ODT_OR;
+  //
+  // Check for Extra Address bit requirement for LRDIMMs
+  //
+  if (MCTPtr->Status[SbLrdimms]) {
+    for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+      if (PsPtr->LrdimmRowAddrBits[i] > 16) {
+        ExtraAddrBits = TRUE;
+      }
+      if (NBPtr->ChannelPtr->LrDimmRankMult[i] > 1) {
+        RankMultEn = TRUE;
+      }
+    }
+  }
+
+  NumDimmslots = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration,
+                                        MCTPtr->SocketId,
+                                        NBPtr->ChannelPtr->ChannelID);
+  //
+  //======================================================================
+  // Build Dram Config Lo Register Value
+  //======================================================================
+  //
+  // Disable Parity Prior to Dram init
+  //
+  MemNSetBitFieldNb (NBPtr, BFParEn, 0);
+  //
+  // LRDIMMS Extended Parity
+  //
+  MemNSetBitFieldNb (NBPtr, BFExtendedParityEn, 0);
+  //
+  // X4Dimm
+  //
+  MemNSetBitFieldNb (NBPtr, BFX4Dimm, NBPtr->ChannelPtr->DimmNibbleAccess & 0xF);
+  //
+  // UnBuffDimm
+  //
+  if (!(MCTPtr->Status[SbRegistered] || MCTPtr->Status[SbLrdimms])) {
+    MemNSetBitFieldNb (NBPtr, BFUnBuffDimm, 1);
+  }
+  //
+  // DimmEccEn
+  //
+  if (MCTPtr->Status[SbEccDimms]) {
+    MemNSetBitFieldNb (NBPtr, BFDimmEccEn, 1);
+  }
+  //
+  // PendRefPayback, StatgRefEn, TStag[0:4]
+  //
+  MemNSetBitFieldNb (NBPtr, BFPendRefPaybackS3En, 1);
+  MemNSetBitFieldNb (NBPtr, BFStagRefEn, 1);
+  for (i = 0; i < 4; i++) {
+    MemNSetBitFieldNb (NBPtr, BFTstag0 + i, 0x14);
+  }
+  //
+  //======================================================================
+  // Build Dram Config Hi Register Value
+  //======================================================================
+  //
+  //
+  // MemClkFreq
+  //
+  MemNSetBitFieldNb (NBPtr, BFMemClkFreq, MemNGetMemClkFreqIdUnb (NBPtr, DCTPtr->Timings.Speed));
+  //
+  // FourRankRDimm0 , FourRankRDimm1 ( Reset Values are 0)
+  //
+  //======================================================================
+  // Build Dram MRS Register Value (Not used for MRS command)
+  //======================================================================
+  //
+  // PchgPDModeSel - This is done here so that the value can be used by
+  //                 MR0 function
+  //
+  if (NBPtr->IsSupported[PchgPDMode]) {
+    MemNSetBitFieldNb (NBPtr, BFPchgPDModeSel, 1);
+  }
+  MemNSetBitFieldNb (NBPtr, BFBurstCtrl, 0);
+
+  //======================================================================
+  // Build Dram Config Misc Register Value
+  //======================================================================
+  //
+  //
+  // LRDIMMs CSMux45 and CSMux67
+  //
+  if (MCTPtr->Status[SbLrdimms]) {
+    if (NumDimmslots == 3) {
+      MemNSetBitFieldNb (NBPtr, BFCSMux45, 0);
+      MemNSetBitFieldNb (NBPtr, BFCSMux67, ExtraAddrBits ? 1 : 0);
+    } else if (NumDimmslots <= 2) {
+      MemNSetBitFieldNb (NBPtr, BFCSMux45, (PsPtr->LrdimmRowAddrBits[0] > 16) ? 1 : 0);
+      MemNSetBitFieldNb (NBPtr, BFCSMux67, (PsPtr->LrdimmRowAddrBits[1] > 16) ? 1 : 0);
+    }
+  }
+  //
+  // LrDimmMrsCtrl
+  //
+  MemNSetBitFieldNb (NBPtr, BFLrDimmMrsCtrl, RankMultEn ? 1 : 0);
+  //
+  // BFLrDimmEnhRefEn
+  //
+  MemNSetBitFieldNb (NBPtr, BFLrDimmEnhRefEn, RankMultEn ? 1 : 0);
+  //
+  // SubMemclkRegDly
+  //
+  MemNSetBitFieldNb (NBPtr, BFSubMemclkRegDly, (MCTPtr->Status[SbRegistered] || MCTPtr->Status[SbLrdimms])? 1 : 0);
+  //======================================================================
+  // Other Registers
+  //======================================================================
+  //
+  //
+  // Non-SPD Timings
+  //
+  MemNSetBitFieldNb (NBPtr, BFTrwtWB, 0x17);
+  MemNSetBitFieldNb (NBPtr, BFTrwtTO, 0x16);
+  MemNSetBitFieldNb (NBPtr, BFTwrrd, 0xB );
+
+  MemNSetBitFieldNb (NBPtr, BFTrdrdSdSc, 0xB);
+  MemNSetBitFieldNb (NBPtr, BFTrdrdSdDc, 0xB);
+  MemNSetBitFieldNb (NBPtr, BFTrdrdDd, 0xB);
+
+  MemNSetBitFieldNb (NBPtr, BFTwrwrSdSc, 0xB);
+  MemNSetBitFieldNb (NBPtr, BFTwrwrSdDc, 0xB);
+  MemNSetBitFieldNb (NBPtr, BFTwrwrDd, 0xB);
+
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    ROOD = ROOD + (UINT8) (MemNCalBufDatDelaySkewOr (NBPtr, GetBufDatDlySkew));
+  }
+  MemNSetBitFieldNb (NBPtr, BFWrOdtOnDuration, DEFAULT_WR_ODT_OR);
+  MemNSetBitFieldNb (NBPtr, BFRdOdtOnDuration, ROOD);
+  MemNSetBitFieldNb (NBPtr, BFWrOdtTrnOnDly, 0);
+
+  MemNSetBitFieldNb (NBPtr, BFTmrd, (NBPtr->MCTPtr->Status[SbLrdimms] ? 6 : 4));
+
+  MemNSetBitFieldNb (NBPtr, BFFlushWrOnS3StpGnt, 1);
+  MemNSetBitFieldNb (NBPtr, BFFastSelfRefEntryDis, 0);
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function caps speed based on battery life check.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNCapSpeedBatteryLifeOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST UINT16 SupportedFreq[] = {
+    DDR1866_FREQUENCY,
+    DDR1600_FREQUENCY,
+    DDR1333_FREQUENCY,
+    DDR1066_FREQUENCY,
+    DDR800_FREQUENCY,
+    DDR667_FREQUENCY
+  };
+
+  UINT32 FreqNumeratorInMHz;
+  UINT32 FreqDivisor;
+  UINT32 VoltageInuV;
+  UINT32 NBFreq;
+  UINT16 DdrFreq;
+  UINT16 j;
+  INT8   NbPs;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  FamilySpecificServices = NULL;
+  GetCpuServicesOfSocket (NBPtr->MCTPtr->SocketId, (const CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &(NBPtr->MemPtr->StdHeader));
+
+  // Find the lowest supported NB Pstate
+  NBFreq = 0;
+  for (NbPs = 3; NbPs >= 0; NbPs--) {
+    if (FamilySpecificServices->GetNbPstateInfo (FamilySpecificServices,
+                                                  NBPtr->MemPtr->PlatFormConfig,
+                                                  &NBPtr->PciAddr,
+                                                  (UINT32) NbPs,
+                                                  &FreqNumeratorInMHz,
+                                                  &FreqDivisor,
+                                                  &VoltageInuV,
+                                                  &(NBPtr->MemPtr->StdHeader))) {
+      NBFreq = FreqNumeratorInMHz / FreqDivisor;
+      break;
+    }
+  }
+
+  ASSERT (NBFreq > 0);
+
+  // Pick Max MEMCLK that is less than or equal to (NCLK / 2)
+  DdrFreq = DDR800_FREQUENCY;
+  for (j = 0; j < GET_SIZE_OF (SupportedFreq); j++) {
+    if (NBFreq >= ((UINT32) 2 * SupportedFreq[j])) {
+      DdrFreq = SupportedFreq[j];
+      break;
+    }
+  }
+
+  // Cap MemClk frequency to lowest NCLK frequency
+  if (NBPtr->DCTPtr->Timings.TargetSpeed > DdrFreq) {
+    NBPtr->DCTPtr->Timings.TargetSpeed = DdrFreq;
+  }
+
+  // Initialize NbPsCtlReg
+  NBPtr->NbPsCtlReg = 0;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function retrieves the Max latency parameters
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @param[in]  *MinDlyPtr - Pointer to variable to store the Minimum Delay value
+ *     @param[in]  *MaxDlyPtr - Pointer to variable to store the Maximum Delay value
+ *     @param[in]  *DlyBiasPtr - Pointer to variable to store Delay Bias value
+ *     @param[in]  MaxRcvEnDly - Maximum receiver enable delay value
+ */
+
+VOID
+MemNGetMaxLatParamsOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly,
+  IN OUT   UINT16 *MinDlyPtr,
+  IN OUT   UINT16 *MaxDlyPtr,
+  IN OUT   UINT16 *DlyBiasPtr
+  )
+{
+  UINT32 N;
+  UINT32 T;
+  UINT32 P;
+  UINT32 MemClkPeriod;
+
+  // 1. P = N = T = 0.
+  P = N = T = 0;
+
+  // Get all sync components BKDG steps 3,4,6,7
+  P = MemNTotalSyncComponentsOr (NBPtr);
+
+  // 8. P = P + CEIL(MAX(D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] +
+  //    D18F2x9C_x0000_0[3:0]0[7:5]_dct[1:0][RdDqsTime] PCLKs))
+  P = P + (MaxRcvEnDly + 31) / 32;
+
+  // 10. T = T + 800 ps
+  T += 800;
+
+  // 11. N = (P/(MemClkFreq * 2) + T) * NclkFreq; Convert from PCLKs plus time to NCLKs.
+  MemClkPeriod = 1000000 / NBPtr->DCTPtr->Timings.Speed;
+  N = ((((P * MemClkPeriod + 1) / 2) + T) * NBPtr->NBClkFreq + 999999) / 1000000;
+
+  // 13. D18F2x210_dct[1:0]_nbp[3:0][MaxRdLatency] = CEIL(N) - 1
+  N = N - 1;
+
+  // Calculate a starting MaxRdLatency delay value with steps 5, 9, and 12 excluded
+  *MinDlyPtr = (UINT16) N;
+
+  *MaxDlyPtr = 0x3FF;
+
+  // Left edge of MaxRdLat will be added with 1 NCLK and 3 PCLK
+  N = 1;
+  P = 3;
+  N += (((P * MemClkPeriod + 1) / 2) * NBPtr->NBClkFreq + 999999) / 1000000;
+  *DlyBiasPtr = (UINT16) N;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function  sets the maximum round-trip latency in the system from the processor to the DRAM
+ *   devices and back.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     MaxRcvEnDly - Maximum receiver enable delay value
+ *
+ */
+
+VOID
+MemNSetMaxLatencyOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly
+  )
+{
+  UINT32 N;
+  UINT32 T;
+  UINT32 P;
+  UINT32 MemClkPeriod;
+
+  AGESA_TESTPOINT (TpProcMemRcvrCalcLatency, &(NBPtr->MemPtr->StdHeader));
+
+  //
+  // Initial value for MaxRdLat used in training
+  //
+  N = 0x55;
+
+  if (MaxRcvEnDly != 0xFFFF) {
+    // 1. P = N = T = 0.
+    P = N = T = 0;
+
+    // Get all sync components BKDG steps 3,4,6,7
+    P = MemNTotalSyncComponentsOr (NBPtr);
+
+    // 5. P = P + 5
+    P += 5;
+
+    // 8. P = P + CEIL(MAX(D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] +
+    //    D18F2x9C_x0000_0[3:0]0[7:5]_dct[1:0][RdDqsTime] PCLKs))
+    P = P + ((MaxRcvEnDly + MAX_RD_DQS_DLY) + 31) / 32;
+
+    // 9. P = P + 5
+    P += 5;
+
+    // 10. T = T + 800 ps
+    T += 800;
+
+    // 11. N = (P/(MemClkFreq * 2) + T) * NclkFreq; Convert from PCLKs plus time to NCLKs.
+    MemClkPeriod = 1000000 / NBPtr->DCTPtr->Timings.Speed;
+    N = ((((P * MemClkPeriod + 1) / 2) + T) * NBPtr->NBClkFreq + 999999) / 1000000;
+
+    // 12. N = N - 1. See step 9.
+    N = N - 1;
+
+    // 13. D18F2x210_dct[1:0]_nbp[3:0][MaxRdLatency] = CEIL(N) - 1
+    N = N - 1;
+  }
+
+  NBPtr->DCTPtr->Timings.MaxRdLat = (UINT16) N;
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMaxRdLat: %03x\n", N);
+  MemNSetBitFieldNb (NBPtr, BFMaxLatency, N);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function set MaxRdLat after HW receiver enable training is completed
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNExitPhyAssistedTrainingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 Dct;
+  UINT8 ChipSel;
+  MEM_TECH_BLOCK  *TechPtr;
+
+  TechPtr = NBPtr->TechPtr;
+
+  MemNReEnablePhyCompNb (NBPtr, NULL);
+
+  // Calculate Max Latency for both channels to prepare for position training
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    //
+    // For Orochi, we need to reset DisAutoRefresh and ZqcsInterval for
+    // Position training.
+    //
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 1);
+      MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 0);
+    }
+
+    if (TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &ChipSel)) {
+      NBPtr->SetMaxLatency (NBPtr, TechPtr->MaxDlyForMaxRdLat);
+    }
+  }
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *     This function send control words after MEMCLK frequency change
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNAfterMemClkFreqChgOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 Dct;
+  MEM_TECH_BLOCK *TechPtr;
+
+  TechPtr = NBPtr->TechPtr;
+
+  // Reprogram the DIMMs' buffers right after MEMCLK frequency change
+  if (!(TechPtr->TechnologySpecificHook[LrdimmFreqChgCtrlWrd] (TechPtr, NULL))) {
+    if (NBPtr->MCTPtr->Status[SbRegistered]) {
+      for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+        MemNSwitchDCTNb (NBPtr, Dct);
+        if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+          TechPtr->FreqChgCtrlWrd (TechPtr);
+        }
+      }
+    }
+  }
+
+  return TRUE;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *     This function modifies CS tri-state bit map
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  CsTriBitmap - Bitmap of chipselects to be tristated
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNBeforeSetCsTriOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *CsTriBitmap
+  )
+{
+  //
+  // The tri-state of CS[7:4] for LrDIMM should be determined by
+  // D18F2xA8_dct[1:0][CsMux45]/[CsMux67]
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    if (MemNGetBitFieldNb (NBPtr, BFCSMux45) == 1) {
+      *(UINT8*) CsTriBitmap &= 0xCF;
+    }
+    if (MemNGetBitFieldNb (NBPtr, BFCSMux67) == 1) {
+      *(UINT8*) CsTriBitmap &= 0x3F;
+    }
+  }
+
+  return TRUE;
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the total of sync components for Max Read Latency calculation
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return      Total in PCLKs
+ */
+UINT32
+STATIC
+MemNTotalSyncComponentsOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 P;
+
+  P = 0;
+
+  // 3. If (D18F2x9C_x0000_0004_dct[1:0][AddrCmdSetup] = 0 & D18F2x9C_x0000_0004_dct[1:0][CsOdt-
+  // Setup] = 0 & D18F2x9C_x0000_0004_dct[1:0][CkeSetup] = 0)
+  // then P = P + 1
+  // else P = P + 2
+  if ((MemNGetBitFieldNb (NBPtr, BFAddrTmgControl) & 0x0202020) == 0) {
+    P += 1;
+  } else {
+    P += 2;
+  }
+
+  // 4. P = P + (8 - D18F2x210_dct[1:0]_nbp[3:0][RdPtrInit]) + 1
+  P = P + (8 - (UINT16) MemNGetBitFieldNb (NBPtr, BFRdPtrInit)) + 1;
+
+  // 6. If (D18F2xA8_dct[1:0][SubMemclkRegDly] = 0 & D18F2x90_dct[1:0][UnbuffDimm] = 0)
+  // then P = P + 2
+  if ((MemNGetBitFieldNb (NBPtr, BFSubMemclkRegDly) == 0) && (MemNGetBitFieldNb (NBPtr, BFUnBuffDimm) == 0)) {
+    P += 2;
+  }
+
+  // 7. P = P + (2 * (D18F2x200_dct[1:0][Tcl] - 1 clocks))
+  P = P + (2 * (MemNGetBitFieldNb (NBPtr, BFTcl) - 1));
+
+  return P;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function is used to calculate BufDatDelay and BufDatDelaySkew value.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   GetDelay   - Get either BufDatDly or BufDatDlySkew value
+ *
+ *     @return      BufDatDly or BufDatDlySkew value
+ */
+UINT32
+MemNCalBufDatDelaySkewOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8   GetDelay
+  )
+{
+  UINT8 SpdOffset;
+  UINT8 Dimm;
+  UINT8 i;
+  UINT8 j;
+  UINT32 MinModuleDly;
+  UINT32 MaxModuleDly;
+  UINT8 SyncDelay;
+  UINT32 SmallestModuleDly;
+  UINT32 LargestModuleDly;
+  UINT32 BufDatDly;
+  UINT32 BufDatDlySkew;
+  MEM_TECH_BLOCK  *TechPtr;
+  UINT8 *SpdBufferPtr;
+
+  TechPtr = NBPtr->TechPtr;
+
+  i = 0;
+  j = 0;
+  SmallestModuleDly = 0;
+  LargestModuleDly = 0;
+  SyncDelay = 0;
+  BufDatDly = 0;
+  BufDatDlySkew = 0;
+  MinModuleDly = 0xFF;
+  MaxModuleDly = 0;
+  SpdOffset = (UINT8) (2 * CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+
+  for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+    if (TechPtr->GetDimmSpdBuffer (TechPtr, &SpdBufferPtr, Dimm)) {
+      if ((SpdBufferPtr[90 + SpdOffset] & 0x7F) < (UINT8) MinModuleDly) {
+        MinModuleDly = SpdBufferPtr[90 + SpdOffset] & 0x7F;
+        i = Dimm;
+      }
+      if ((SpdBufferPtr[91 + SpdOffset] & 0x7F) > (UINT8) MaxModuleDly) {
+        MaxModuleDly = SpdBufferPtr[91 + SpdOffset] & 0x7F;
+        j = Dimm;
+      }
+    }
+  }
+  if (!(MinModuleDly >= 0x3C && MinModuleDly <= 0x58)) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\tMinModuleDly out of range (0x3C - 0x58): %02x\n", MinModuleDly);
+  }
+  if (!(MaxModuleDly >= 0x3C && MaxModuleDly <= 0x58)) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\tMaxModuleDly out of range (0x3C - 0x58): %02x\n", MaxModuleDly);
+  }
+  //
+  //Calculate BufDatDly
+  //
+  //SmallestModuleDelay = MinimumModuleDelay * .000125 us * 400 MHz * 0x40.
+  //MinimumModuleDelay is the minimum SPD module delay across all DIMMs on a channel.
+  //
+  SmallestModuleDly =  (UINT32) (MinModuleDly * 125 * 400 * 0x40 / 1000000);
+  //
+  //SyncDelay = (F0RC2[AddrCmdPrelaunch] ? 0x30 - (2*F1RC12[QCAPrelaunchDelay]) : 0x20) + 0x10.
+  //SyncDelay is calculated from the SPD values of the MinimumModuleDelay DIMM.
+  //
+  TechPtr->GetDimmSpdBuffer (TechPtr, &SpdBufferPtr, i);
+  SyncDelay = (UINT8) ((((SpdBufferPtr[67] & 0x01) == 1) ? (0x30 - 2 * (SpdBufferPtr[70] & 0x07)) : 0x20) + 0x10);
+  //
+  //BufDatDelay = FLOOR((((SmallestModuleDelay - SynchDelay) * (MemClkFreq/400 MHz)) + SynchDelay)/0x40).
+  //
+  BufDatDly = (((SmallestModuleDly - SyncDelay) * NBPtr->DCTPtr->Timings.Speed / 400) + SyncDelay) / 0x40;
+
+  if (GetDelay == GetBufDatDly) {
+    return BufDatDly;
+  }
+  //
+  //Calculate BufDatDlySkew
+  //
+  //LargestModuleDelay = MaximumModuleDelay * .000125 us * 400 MHz * 0x40.
+  //MaximumModuleDelay is the maximum SPD module delay across all DIMMs on a channel.
+  //
+  LargestModuleDly = (UINT32) (MaxModuleDly * 125 * 400 * 0x40 / 1000000);
+  //
+  //SyncDelay = (F0RC2[AddrCmdPrelaunch] ? 0x30 - (2*F1RC12[QCAPrelaunchDelay]) : 0x20) + 0x10.
+  //SyncDelay is calculated from the SPD values of the MaximumModuleDelay DIMM.
+  //
+  TechPtr->GetDimmSpdBuffer (TechPtr, &SpdBufferPtr, j);
+  SyncDelay = (UINT8) ((((SpdBufferPtr[67] & 0x01) == 1) ? (0x30 - 2 * (SpdBufferPtr[70] & 0x07)) : 0x20) + 0x10);
+  //
+  //BufDatDelaySkew = FLOOR((((LargestModuleDelay - SynchDelay) * (MemClkFreq/400 MHz)) + SynchDelay)/0x40) - BufDatDelay.
+  //
+  BufDatDlySkew = ((((((LargestModuleDly - SyncDelay) * NBPtr->DCTPtr->Timings.Speed + 200) / 400) + SyncDelay) - (BufDatDly * 0x40) + 0x20) / 0x40);
+
+  return BufDatDlySkew ;
+}
+/*-----------------------------------------------------------------------------
+ *
+ *     This function Enables parity on both DCTs if Parity is supported.
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  *OptParam  - Unused
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNEnableParityAfterMemRstOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  DIE_STRUCT *MCTPtr;
+  MEM_PS_BLOCK * PsPtr;
+  UINT8 i;
+
+  MCTPtr = NBPtr->MCTPtr;
+  PsPtr = NBPtr->PsPtr;
+
+  if (NBPtr->MCTPtr->Status[SbParDimms]) {
+    //
+    // SbParDimms should be set for all DDR3 RDIMMS
+    // Cannot turn off ParEn for DDR3
+    //
+    MemNSetBitFieldNb (NBPtr, BFParEn, 1);
+    //
+    // LRDIMMS Extended Parity
+    //
+    if (MCTPtr->Status[SbLrdimms]) {
+      for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+        if (PsPtr->LrdimmRowAddrBits[i] > 16) {
+          MemNSetBitFieldNb (NBPtr, BFExtendedParityEn, 1);
+          break;
+        }
+      }
+    }
+  }
+  return TRUE;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function calculates RdOdtTrnOnDly and RdOdtOnDuration when LrDimms
+ *     are present
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  *OptParam  - Not Used
+ *
+ *     @return  TRUE - always
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNProgOdtControlOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  DCT_STRUCT *DCTPtr;
+  UINT8 Tcwl;
+  UINT8 RdOdtTrnOnDly;
+  UINT8 RdOdtOnDuration;
+
+  DCTPtr = NBPtr->DCTPtr;
+  Tcwl = (UINT8) (DCTPtr->Timings.Speed / 133) + 2;
+  RdOdtTrnOnDly = (DCTPtr->Timings.CasL > Tcwl) ? (DCTPtr->Timings.CasL - Tcwl) : 0;
+  RdOdtOnDuration = 6;
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    RdOdtTrnOnDly = RdOdtTrnOnDly + (UINT8) MemNCalBufDatDelaySkewOr (NBPtr, GetBufDatDly);
+    RdOdtOnDuration = RdOdtOnDuration + (UINT8) MemNCalBufDatDelaySkewOr (NBPtr, GetBufDatDlySkew);
+  }
+  MemNSetBitFieldNb (NBPtr, BFRdOdtTrnOnDly, RdOdtTrnOnDly);
+  MemNSetBitFieldNb (NBPtr, BFRdOdtOnDuration, RdOdtOnDuration);
+  IDS_HDT_CONSOLE (MEM_FLOW,"\n\t\t\tRdOdtTrnOnDly = %x",RdOdtTrnOnDly);
+  IDS_HDT_CONSOLE (MEM_FLOW,"\n\t\t\tRdOdtOnDuration = %x\n",RdOdtOnDuration);
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This is a general purpose function that executes before DRAM init
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNBeforeDramInitOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_OR; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      //
+      // 2.10.6.6 DCT Training Specific Configuration
+      //
+      MemNSetBitFieldNb (NBPtr, BFAddrCmdTriEn, 0);
+      MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 1);
+      MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1);
+      MemNSetBitFieldNb (NBPtr, BFForceAutoPchg, 0);
+      MemNSetBitFieldNb (NBPtr, BFDynPageCloseEn, 0);
+      MemNSetBitFieldNb (NBPtr, BFBankSwizzleMode, 0);
+      MemNSetBitFieldNb (NBPtr, BFDcqBypassMax, 0);
+      MemNSetBitFieldNb (NBPtr, BFPowerDownEn, 0);
+      MemNSetBitFieldNb (NBPtr, BFDisSimulRdWr, 0);
+      MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 0);
+      MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 0);
+      MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 0);
+      MemNSetBitFieldNb (NBPtr, BFEnRxPadStandby, 0);
+      MemNSetBitFieldNb (NBPtr, BFBwCapEn, 0);
+      MemNSetBitFieldNb (NBPtr, BFODTSEn, 0);
+      MemNSetBitFieldNb (NBPtr, BFDctSelIntLvEn, 0);
+      MemNSetBitFieldNb (NBPtr, BFL3Scrub, 0);
+      MemNSetBitFieldNb (NBPtr, BFDramScrub, 0);
+      MemNSetBitFieldNb (NBPtr, BFScrubReDirEn, 0);
+      MemNSetBitFieldNb (NBPtr, BFL3ScrbRedirDis, 1);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function releases the NB P-state force.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   OptParam - Optional parameter
+ *
+ *     @return    TRUE
+ */
+BOOLEAN
+MemNReleaseNbPstateOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  // 6. Restore the initial D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0] values.
+  MemNSetBitFieldNb (NBPtr, BFNbPstateCtlReg, (MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg) & 0xFFFF9FFF) | (NBPtr->NbPsCtlReg & 0x6000));
+
+  // 7. Restore the initial D18F5x170[NbPstateThreshold, NbPstateHi] values.
+  MemNSetBitFieldNb (NBPtr, BFNbPstateCtlReg, (MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg) & 0xFFFFF13F) | (NBPtr->NbPsCtlReg & 0x0EC0));
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function Sets Power Down options and enables Power Down
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     The following registers are set:
+ *      BFPowerDownMode         BFPrtlChPDEnhEn
+ *      BFTxp                   BFAggrPDDelay
+ *      BFTxpDll                BFAggrPDEn
+ *      BFPchgPDEnDelay         BFPowerDownEn
+ *
+ * NOTE:  Delay values must be set before turning on the associated Enable bit
+ */
+VOID
+MemNPowerDownCtlOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 PowerDownMode;
+  UINT8 Tmod;
+  CONST UINT32 PwrMngm1[] = {0, 0, 0x05050403, 0x05050403, 0x06060403, 0x07070504, 0x08080504, 0x0A0A0605, 0x0B0B0706};
+  UINT8 i;
+  UINT16 Speed;
+  UINT32 PackageType;
+
+  if (NBPtr->RefPtr->EnablePowerDown) {
+    PackageType = LibAmdGetPackageType (&(NBPtr->MemPtr->StdHeader));
+    //
+    // PowerDownMode
+    //
+    PowerDownMode = (UINT8) UserOptions.CfgPowerDownMode;
+    PowerDownMode = (!NBPtr->IsSupported[ChannelPDMode]) ? PowerDownMode : 0;
+    IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(NBPtr->MemPtr->StdHeader));
+    if (PowerDownMode == 1) {
+      MemNSetBitFieldNb (NBPtr, BFPowerDownMode, 1);
+    }
+    //
+    // Txp
+    //
+    MemNSetTxpNb (NBPtr);
+    //
+    // PchgPDModeSel is set elswhere.
+    //
+    Tmod = (UINT8) MemNGetBitFieldNb (NBPtr, BFTmod);
+    //
+    // Partial Channel Power Down
+    //
+    MemNSetBitFieldNb (NBPtr, BFPrtlChPDDynDly, 2);
+    MemNSetBitFieldNb (NBPtr, BFPrtlChPDEnhEn, 1);
+    //
+    // Aggressive PowerDown
+    // PchgPDEnDelay: IF (D18F2xA8_dct[1:0][AggrPDEn]) THEN 1 ELSE 0 ENDIF.
+    //
+    MemNSetBitFieldNb (NBPtr, BFAggrPDDelay, 0);
+    if (PackageType != PACKAGE_TYPE_AM3r2) {
+      MemNSetBitFieldNb (NBPtr, BFAggrPDEn, 1);
+      MemNSetBitFieldNb (NBPtr, BFPchgPDEnDelay, 1);
+    }
+
+    // Program DRAM Power Management 1 register
+    Speed = NBPtr->DCTPtr->Timings.Speed;
+    i = (UINT8) ((Speed < DDR800_FREQUENCY) ? ((Speed / 66) - 3) : (Speed / 133));
+    ASSERT ((i > 1) && (i < sizeof (PwrMngm1)));
+    MemNSetBitFieldNb (NBPtr, BFDramPwrMngm1Reg, PwrMngm1[i]);
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnflowor.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnflowor.c
new file mode 100644
index 0000000000..563c5e8e2d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnflowor.c
@@ -0,0 +1,134 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnflowor.c
+ *
+ * Orochi initializer for MCT and DCT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 51276 $ @e \$Date: 2011-04-20 16:02:17 -0600 (Wed, 20 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mnor.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_OR_MNFLOWOR_FILECODE
+/* features */
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_TECH_LRDIMM memLrdimmSupported;
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function selects appropriate Tech functions for the NB.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNTechBlockSwitchOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+
+  TechPtr = NBPtr->TechPtr;
+
+  // Specify Dimm-Byte training for Nb
+  MemTDimmByteTrainInit (TechPtr);
+
+  // Remove the following functions because they are not needed for OR
+  TechPtr->SetDramMode = (BOOLEAN (*) (MEM_TECH_BLOCK *)) memDefTrue;
+  TechPtr->SpdCalcWidth = (BOOLEAN (*) (MEM_TECH_BLOCK *)) memDefTrue;
+  TechPtr->SetDqsEccTmgs = (BOOLEAN (*) (MEM_TECH_BLOCK *)) memDefTrue;
+  TechPtr->FindMaxDlyForMaxRdLat = MemTFindMaxRcvrEnDlyRdDqsDlyByteUnb;
+  TechPtr->ResetDCTWrPtr = MemTResetRcvFifoUnb;
+
+  // Initialize LRDIMMs
+  memLrdimmSupported.MemTInitializeLrdimm (TechPtr);
+}
+
+/*----------------------------------------------------------------------------
+ *                            LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnidendimmor.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnidendimmor.c
new file mode 100644
index 0000000000..26ec28d372
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnidendimmor.c
@@ -0,0 +1,218 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnidendimmor.c
+ *
+ * Or northbridge constructor for dimm identification translator.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/OR)
+ * @e \$Revision: 51640 $ @e \$Date: 2011-04-26 03:42:21 -0600 (Tue, 26 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnor.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_OR_MNIDENDIMMOR_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNIdentifyDimmConstructorOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+BOOLEAN
+STATIC
+MemNFixupSysAddrOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       VOID *SysAddrPtr
+  );
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for dimm identification translator
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in,out]   NodeID   - ID of current node to construct
+ *     @return          TRUE     - This is the correct constructor for the targeted node.
+ *     @return          FALSE    - This isn't the correct constructor for the targeted node.
+ */
+
+BOOLEAN
+MemNIdentifyDimmConstructorOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedOr (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_OR;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_OR;
+  NBPtr->CsRegMsk = 0x7FF83FE0;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Ganged = FALSE;
+  MemNInitNBRegTableOr (NBPtr, NBPtr->NBRegTable);
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldOr;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelOr;
+  NBPtr->FamilySpecificHook[DCTSelectSwitch] = MemNDctCfgSelectUnb;
+  NBPtr->FamilySpecificHook[FixupSysAddr] = MemNFixupSysAddrOr;
+
+  NBPtr->Dct = 0;
+  MemNSetBitFieldNb (NBPtr, BFDctCfgSel, 0);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is used to workaround erratum 637
+ *
+ *     @param[in,out]   *NBPtr      - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *SysAddrPtr - Pointer SysAddr variable
+ *
+ */
+
+BOOLEAN
+STATIC
+MemNFixupSysAddrOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       VOID *SysAddrPtr
+  )
+{
+  UINT64 SysAddr;
+  UINT8  SourceNode;
+  UINT8  CoreStateSaveDestNode;
+  UINT64 Cc6BaseAddress;
+  UINT32 IntlvEn;
+  UINT32 IntlvSel;
+  PCI_ADDR PciAddr;
+
+  // Save NBPtr->PciAddr, so it can be used later to access different node.
+  PciAddr = NBPtr->PciAddr;
+
+  SysAddr = *((UINT64 *) SysAddrPtr);
+  if ((SysAddr >> 24) == 0xFDF7) {
+    // Calculate the address of the source node
+    SourceNode = (UINT8) ((SysAddr >> 20) & 0x7);
+
+    // Find CoreStateSaveDestNode based on the access source
+    NBPtr->PciAddr.Address.Device = 0x18 + SourceNode;
+    CoreStateSaveDestNode = (UINT8) NBPtr->GetBitField (NBPtr, BFCoreStateSaveDestNode);
+
+    // Calculate Cc6BaseAddress from the destination node's DRAM Limit System Address
+    NBPtr->PciAddr.Address.Device = 0x18 + CoreStateSaveDestNode;
+    Cc6BaseAddress = ((UINT64) NBPtr->GetBitField (NBPtr, BFDramLimitAddr) << 27);
+    IntlvEn = NBPtr->GetBitField (NBPtr, BFDramIntlvEn);
+
+    // Check if Node Interleaving is enabled
+    if (IntlvEn != 0) {
+      // Node Interleaving is enabled, obtain the interleave position
+      IntlvSel = NBPtr->GetBitField (NBPtr, BFDramIntlvSel);
+      *((UINT64 *) SysAddrPtr) = Cc6BaseAddress | ((IntlvEn ^ 0x7) << 24) | ((SysAddr & 0xFFF000) * (IntlvEn + 1)) | (IntlvSel << 12) | (SysAddr & 0xFFF);
+    } else {
+      // Node Interleaving is disabled
+      *((UINT64 *) SysAddrPtr) = Cc6BaseAddress | (0x7 << 24) | (SysAddr & 0xFFFFFF);
+    }
+  }
+
+  // Restore NBPtr->PciAddr
+  NBPtr->PciAddr = PciAddr;
+
+  return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnmctor.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnmctor.c
new file mode 100644
index 0000000000..09480816a3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnmctor.c
@@ -0,0 +1,340 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnmctor.c
+ *
+ * Northbridge Orochi MCT supporting functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/OR)
+ * @e \$Revision: 51634 $ @e \$Date: 2011-04-26 03:12:52 -0600 (Tue, 26 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "cpuFeatures.h"
+#include "mnor.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_OR_MNMCTOR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets final values for specific registers.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNFinalizeMctOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  DRAM_PREFETCH_MODE DramPrefetchMode;
+  UINT16 Speed;
+  UINT32 Value32;
+  UINT8 DcqBwThrotWm;
+  UINT8 DcqBwThrotWm1;
+  UINT8 DcqBwThrotWm2;
+  UINT8 Dct;
+
+  MemPtr = NBPtr->MemPtr;
+  RefPtr = MemPtr->ParameterListPtr;
+  DramPrefetchMode = MemPtr->PlatFormConfig->PlatformProfile.AdvancedPerformanceProfile.DramPrefetchMode;
+  Speed = NBPtr->DCTPtr->Timings.Speed;
+  //
+  // F2x11C
+  //
+  // FlushWrOnStpGnt = 0
+  // PrefThreeConf = 110b
+  // PrefTwoConf = 011b
+  // PrefOneConf = 10b
+  // PrefConfSat = 00b
+  // PrefIoDis = 0
+  // PrefCpuDis = 0
+  // MctWrLimit = 10h
+  // DctWrLimit = 01b
+  Value32 = MemNGetBitFieldNb (NBPtr, BFMctCfgHiReg);
+  Value32 &= 0xD003CF80;
+  Value32 |= 0x0CE00041;
+  MemNSetBitFieldNb (NBPtr, BFMctCfgHiReg, Value32);
+
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_IO || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefIoDis, 1);
+  }
+
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_CPU || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefCpuDis, 1);
+  }
+
+  if (Speed == DDR667_FREQUENCY) {
+    DcqBwThrotWm = 0;
+    DcqBwThrotWm1 = 3;
+    DcqBwThrotWm2 = 4;
+  } else if (Speed == DDR800_FREQUENCY) {
+    DcqBwThrotWm = 0;
+    DcqBwThrotWm1 = 3;
+    DcqBwThrotWm2 = 5;
+  } else if (Speed == DDR1066_FREQUENCY) {
+    DcqBwThrotWm = 0;
+    DcqBwThrotWm1 = 4;
+    DcqBwThrotWm2 = 6;
+  } else if (Speed == DDR1333_FREQUENCY) {
+    DcqBwThrotWm = 0;
+    DcqBwThrotWm1 = 5;
+    DcqBwThrotWm2 = 8;
+  } else if  (Speed == DDR1600_FREQUENCY) {
+    DcqBwThrotWm = 0;
+    DcqBwThrotWm1 = 6;
+    DcqBwThrotWm2 = 9;
+  } else if  (Speed == DDR1866_FREQUENCY) {
+    DcqBwThrotWm = 0;
+    DcqBwThrotWm1 = 7;
+    DcqBwThrotWm2 = 10;
+  } else {
+    DcqBwThrotWm = 0;
+    DcqBwThrotWm1 = 8;
+    DcqBwThrotWm2 = 12;
+  }
+
+  //
+  // F2x1B0
+  //
+  // DcqBwThrotWm
+  // PrefFiveConf = 111b
+  // PrefFourConf = 111b
+  // EnSplitDctLimits = 1
+  // CohPrefPrbLmt = IF (PrbFltrEn) THEN 000b ELSE 001b ENDIF
+  // AdapPrefNegativeStep = 00b
+  // AdapPrefPositiveStep = 00b
+  // AdapPrefMissRatio = 01b
+  Value32 = MemNGetBitFieldNb (NBPtr, BFExtMctCfgLoReg);
+  Value32 &= 0x003FE8C0;
+  Value32 |= 0x0FC01001;
+  Value32 |= (UINT32) DcqBwThrotWm << 28;
+  MemNSetBitFieldNb (NBPtr, BFExtMctCfgLoReg, Value32);
+
+  //
+  // F2x1B4
+  //
+  // DcqBwThrotWm2
+  // DcqBwThrotWm1
+  Value32 = MemNGetBitFieldNb (NBPtr, BFExtMctCfgHiReg);
+  Value32 &= 0xF7FFFC00;
+  Value32 |= (((UINT32) DcqBwThrotWm2 << 5) | (UINT32) DcqBwThrotWm1);
+  // FlushWrOnS3StpGnt to 1
+  Value32 |= (UINT32) 1 << 27;
+  MemNSetBitFieldNb (NBPtr, BFExtMctCfgHiReg, Value32);
+
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_OR; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      //
+      // Phy Power Saving
+      //
+      MemNPhyPowerSavingUnb (NBPtr);
+      //
+      // Power Down Enable
+      //
+      if (NBPtr->RefPtr->EnablePowerDown) {
+        MemNSetBitFieldNb (NBPtr, BFPowerDownEn, 1);
+      }
+    }
+  }
+
+  // Set LockDramCfg
+  if (IsFeatureEnabled (C6Cstate, NBPtr->MemPtr->PlatFormConfig, &(NBPtr->MemPtr->StdHeader))) {
+    IDS_SKIP_HOOK (IDS_TRACE_MODE, NBPtr, &NBPtr->MemPtr->StdHeader) {
+        MemNSetBitFieldNb (NBPtr, BFLockDramCfg, 1);
+    }
+  }
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+ /*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function handles scrubber register settings for orochi.
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - If the function is called before scrub rate is set or after
+ *                                  TRUE    function is called before scrub rate is set
+ *                                  FALSE   function is called after scrub rate is set
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNScrubberErratumOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 L3Scrub;
+  UINT8 DramScrub;
+
+  if (*(BOOLEAN *) OptParam == TRUE) {
+    MemNSwitchDCTNb (NBPtr, 0);
+  } else {
+    ASSERT (NBPtr->Dct == 0);
+    L3Scrub = (UINT8) MemNGetBitFieldNb (NBPtr, BFL3Scrub);
+    DramScrub = (UINT8) MemNGetBitFieldNb (NBPtr, BFDramScrub);
+
+    // Set scrubber for DCT1
+    MemNSwitchDCTNb (NBPtr, 1);
+    MemNSetBitFieldNb (NBPtr, BFL3Scrub, L3Scrub);
+    MemNSetBitFieldNb (NBPtr, BFDramScrub, DramScrub);
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function changes DataTxFifoWrDly based on training result of WrDatDly
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ */
+
+BOOLEAN
+MemNDataTxFifoWrDlyOverrideOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 i;
+  UINT8 Dct;
+  UINT8 ByteLane;
+  UINT16 CsEnabled;
+  BOOLEAN DataTxFifoWrDly;
+
+  // This should be done only after DQS Position training
+  if (NBPtr->NbFreqChgState <= 1) {
+    return TRUE;
+  }
+
+  // Set DataTxFifoWrDly based on WrDatDly
+  // if all WrDatDly of populated dimms on a DCT are equal to 7h
+  // Set DataTxFifoWrDly to >= 2h
+  for (Dct = 0; Dct < 2; Dct ++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    DataTxFifoWrDly = TRUE;
+    CsEnabled = NBPtr->DCTPtr->Timings.CsEnabled;
+    for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i ++) {
+      if ((CsEnabled & (UINT16) (3 << (i << 1))) != 0) {
+        for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+          if ((GetTrainDlyFromHeapNb (NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (i, ByteLane)) >> 5) != 7) {
+            DataTxFifoWrDly = FALSE;
+            break;
+          }
+        }
+        if (!DataTxFifoWrDly) {
+          break;
+        }
+      }
+    }
+
+    if (DataTxFifoWrDly) {
+      if (MemNGetBitFieldNb (NBPtr, BFDataTxFifoWrDly) < 2) {
+        MemNSetBitFieldNb (NBPtr, BFDataTxFifoWrDly, 2);
+      }
+    }
+  }
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnor.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnor.c
new file mode 100644
index 0000000000..4715de68d2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnor.c
@@ -0,0 +1,640 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnor.c
+ *
+ * Common Northbridge  functions for Orochi
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/OR)
+ * @e \$Revision: 52421 $ @e \$Date: 2011-05-05 21:03:23 -0600 (Thu, 05 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnor.h"
+#include "mu.h"
+#include "S3.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "F15PackageType.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_OR_MNOR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define SPLIT_CHANNEL   (UINT32) 0x20000000
+#define CHANNEL_SELECT  (UINT32) 0x10000000
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/**
+ * @todo:  Add Comments with field descriptions
+ */
+CONST MEM_FREQ_CHANGE_PARAM FreqChangeParamOr = {0x0190, 7, 7, 14, 3, 18, 470, 946};
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern PSO_ENTRY DefaultPlatformMemoryConfiguration[];
+extern OPTION_MEM_FEATURE_NB* memNTrainFlowControl[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]        *FeatPtr  - Pointer to the MEM_FEAT_BLOCK_NB
+ *     @param[in]        *SharedPtr - Pointer to the MEM_SHARED_DATA
+ *     @param[in]        NodeID  - UINT8 indicating node ID of the NB object.
+ *
+ *     @return     Boolean indicating that this is the correct memory
+ *                 controller type for the node number that was passed in.
+ */
+
+BOOLEAN
+MemConstructNBBlockOR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 SpdSocketIndex;
+  UINT8 SpdChannelIndex;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedOr (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->SharedPtr = SharedPtr;
+
+  MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->MCTPtr->NodeId = NodeID;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+  NBPtr->VarMtrrHiMsk = GetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_OR * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_OR * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                                          )
+                                        );
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+    return FALSE;
+  }
+
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_OR;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_OR * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_OR; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_OR;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].Dct = Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_OR * sizeof (CH_DEF_STRUCT);
+  }
+  NBPtr->PSBlock = (MEM_PS_BLOCK *) AllocHeapParams.BufferPtr;
+
+  //
+  // Initialize Socket List
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_OR; Dct++) {
+    MemPtr->SocketList[MCTPtr->SocketId].ChannelPtr[(MCTPtr->DieId * 2) + Dct] = &(MCTPtr->DctData[Dct].ChData[0]);
+    MemPtr->SocketList[MCTPtr->SocketId].TimingsPtr[(MCTPtr->DieId * 2) + Dct] = &(MCTPtr->DctData[Dct].Timings);
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = (MCTPtr->DieId * 2) + Dct;
+  }
+
+  MemNInitNBDataOr (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  FeatPtr->InitHwRxEn (NBPtr);
+  FeatPtr->InitEarlySampleSupport (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+
+
+  //
+  // Calculate SPD Offsets per channel and assign pointers to the data.  At this point, we calculate the Node-Dct-Channel
+  // centric offsets and store the pointers to the first DIMM of each channel in the Channel Definition struct for that
+  // channel.  This pointer is then used later to calculate the offsets to be used for each logical dimm once the
+  // dimm types(QR or not) are known. This is done in the Technology block constructor.
+  //
+  // Calculate the SpdSocketIndex separately from the SpdChannelIndex.
+  // This will facilitate modifications due to some processors that might
+  // map the DCT-CHANNEL differently.
+  //
+  SpdSocketIndex = GetSpdSocketIndex (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, &MemPtr->StdHeader);
+  //
+  // Traverse the Dct/Channel structures
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_OR; Dct++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_OR; Channel++) {
+      //
+      // Calculate the number of Dimms on this channel using the
+      //   die/dct/channel to Socket/channel conversion.
+      //
+      SpdChannelIndex = GetSpdChannelIndex (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                            NBPtr->MCTPtr->SocketId,
+                                            MemNGetSocketRelativeChannelNb (NBPtr, Dct, Channel),
+                                            &MemPtr->StdHeader);
+      NBPtr->MCTPtr->DctData[Dct].ChData[Channel].SpdPtr = &(MemPtr->SpdDataStructure[SpdSocketIndex + SpdChannelIndex]);
+    }
+  }
+
+  //
+  // Initialize Dct and DctCfgSel bit
+  //
+  MemNSetBitFieldNb (NBPtr, BFDctCfgSel, 0);
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes member functions and variables of NB block.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitNBDataOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32  PackageType;
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+  NBPtr->PsPtr = NBPtr->PSBlock;
+
+  MemNInitNBRegTableOr (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_OR;
+  NBPtr->ChannelCount = MAX_CHANNELS_PER_DCT_OR;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_OR;
+  NBPtr->Ganged = FALSE;
+  NBPtr->PosTrnPattern = POS_PATTERN_256B;
+  NBPtr->MemCleared = FALSE;
+  NBPtr->StartupSpeed = DDR667_FREQUENCY;
+  NBPtr->RcvrEnDlyLimit = 0x1FF;
+  NBPtr->DefDctSelIntLvAddr = 3;
+  NBPtr->NbFreqChgState = 0;
+  NBPtr->MaxRxEnSeedTotal = 0x3FF;
+  NBPtr->MinRxEnSeedGross = 0;
+  NBPtr->FreqChangeParam = (MEM_FREQ_CHANGE_PARAM *) &FreqChangeParamOr;
+  NBPtr->CsRegMsk = 0x7FF83FE0;
+  NBPtr->TotalMaxVrefRange = 0x20;
+  NBPtr->TotalRdDQSDlyRange = 0x40;
+  NBPtr->MaxSeedCount = MAX____DQS_SEED_COUNT;
+  NBPtr->PhaseLaneMask = 0x3FFFF;
+  NBPtr->MaxDiamondStep = 3;
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+
+  NBPtr->SetMaxLatency = MemNSetMaxLatencyOr;
+  NBPtr->getMaxLatParams = MemNGetMaxLatParamsOr;
+  NBPtr->InitializeMCT = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefTrue;
+  NBPtr->FinalizeMCT = MemNFinalizeMctOr;
+  NBPtr->SendMrsCmd = MemNSendMrsCmdUnb;
+  NBPtr->sendZQCmd = MemNSendZQCmdNb;
+  NBPtr->WritePattern = MemNWritePatternOr;
+  NBPtr->ReadPattern = MemNReadPatternOr;
+  NBPtr->GenHwRcvEnReads = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+  NBPtr->CompareTestPattern = MemNCompareTestPatternNb;
+  NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternNb;
+  NBPtr->StitchMemory = MemNStitchMemoryNb;
+  NBPtr->AutoConfig = MemNAutoConfigOr;
+  NBPtr->PlatformSpec = MemNPlatformSpecUnb;
+  NBPtr->InitMCT = MemNInitMCTNb;
+  NBPtr->DisableDCT = MemNDisableDCTUnb;
+  NBPtr->StartupDCT = MemNStartupDCTUnb;
+  NBPtr->SyncTargetSpeed = MemNSyncTargetSpeedNb;
+  NBPtr->ChangeFrequency = MemNChangeFrequencyUnb;
+  NBPtr->RampUpFrequency = MemNRampUpFrequencyNb;
+  NBPtr->ChangeNbFrequency = MemNChangeNbFrequencyUnb;
+  NBPtr->ChangeNbFrequencyWrap = MemNChangeNbFrequencyWrapUnb;
+  NBPtr->ProgramNbPsDependentRegs = MemNProgramNbPstateDependentRegistersUnb;
+  NBPtr->ProgramCycTimings = MemNProgramCycTimingsUnb;
+  NBPtr->SyncDctsReady = MemNSyncDctsReadyNb;
+  NBPtr->HtMemMapInit = MemNHtMemMapInitNb;
+  NBPtr->SyncAddrMapToAllNodes = MemNSyncAddrMapToAllNodesNb;
+  NBPtr->CpuMemTyping = MemNCPUMemTypingNb;
+  NBPtr->BeforeDqsTraining = MemNBeforeDQSTrainingOr;
+  NBPtr->AfterDqsTraining = MemNAfterDQSTrainingOr;
+  NBPtr->OtherTiming = MemNOtherTimingOr;
+  NBPtr->UMAMemTyping = MemNUMAMemTypingNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelOr;
+  NBPtr->TechBlockSwitch = MemNTechBlockSwitchOr;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldOr;
+  NBPtr->SetEccSymbolSize = MemNSetEccSymbolSizeNb;
+  NBPtr->TrainingFlow = (VOID (*) (MEM_NB_BLOCK *)) MemNTrainingFlowUnb;
+  MemNInitNBDataNb (NBPtr);
+  NBPtr->PollBitField = MemNPollBitFieldNb;
+  NBPtr->BrdcstCheck = MemNBrdcstCheckNb;
+  NBPtr->BrdcstSet = MemNBrdcstSetNb;
+  NBPtr->GetTrainDly = MemNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemNSetTrainDlyNb;
+  NBPtr->PhyFenceTraining = MemNPhyFenceTrainingUnb;
+  NBPtr->GetSysAddr = MemNGetMCTSysAddrNb;
+  NBPtr->RankEnabled = MemNRankEnabledNb;
+  NBPtr->MemNBeforeDramInitNb = MemNBeforeDramInitOr;
+  NBPtr->MemNcmnGetSetTrainDly = MemNcmnGetSetTrainDlyUnb;
+  NBPtr->MemPPhyFenceTrainingNb = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+  NBPtr->MemNInitPhyComp = MemNInitPhyCompOr;
+  NBPtr->MemNBeforePlatformSpecNb = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+  NBPtr->MemNPlatformSpecificFormFactorInitNb = MemNPlatformSpecificFormFactorInitTblDrvNb;
+  NBPtr->MemNPFenceAdjustNb = MemNPFenceAdjustOr;
+  NBPtr->GetTrainDlyParms = MemNGetTrainDlyParmsUnb;
+  NBPtr->TrainingPatternInit = MemNTrainingPatternInitNb;
+  NBPtr->TrainingPatternFinalize = MemNTrainingPatternFinalizeNb;
+  NBPtr->GetApproximateWriteDatDelay = MemNGetApproximateWriteDatDelayNb;
+  NBPtr->CSPerChannel = MemNCSPerChannelNb;
+  NBPtr->CSPerDelay = MemNCSPerDelayNb;
+  NBPtr->FlushPattern = MemNFlushPatternNb;
+  NBPtr->MinDataEyeWidth = MemNMinDataEyeWidthNb;
+  NBPtr->MemNCapSpeedBatteryLife = MemNCapSpeedBatteryLifeOr;
+  NBPtr->GetUmaSize = MemNGetUmaSizeNb;
+  NBPtr->GetMemClkFreqId = MemNGetMemClkFreqIdUnb;
+  NBPtr->EnableSwapIntlvRgn = MemNEnableSwapIntlvRgnNb;
+  NBPtr->WaitXMemClks = MemNWaitXMemClksNb;
+  NBPtr->MemNGetDramTerm = MemNGetDramTermTblDrvNb;
+  NBPtr->MemNGetDynDramTerm = MemNGetDynDramTermTblDrvNb;
+  NBPtr->MemNGetMR0CL = MemNGetMR0CLTblDrvNb;
+  NBPtr->MemNGetMR0WR = MemNGetMR0WRTblDrvNb;
+  NBPtr->MemNSaveMR0 = MemNSaveMR0Or;
+  NBPtr->MemNGetMR2CWL = MemNGetMR2CWLUnb;
+  NBPtr->AllocateC6Storage = MemNAllocateC6StorageUnb;
+  NBPtr->InPhaseCompareRdDqs__Pattern = MemNInPhaseCompareRdDqs__PatternUnb;
+  NBPtr->Phase180CompareRdDqs__Pattern = MemN180CompareRdDqs__PatternUnb;
+  NBPtr->AgressorContinuousWrites = MemNAgressorContinuousWritesUnb;
+  NBPtr->GetPrbs__RdDqsSeed = MemNGetPrbs__RdDqsSeedUnb;
+  NBPtr->InitializeRdDqs__VictimContinuousWrites = MemNInitializeRdDqs__VictimContinuousWritesUnb;
+  NBPtr->FinalizeRdDqs__VictimContinuousWrites = MemNFinalizeRdDqs__VictimContinuousWritesUnb;
+  NBPtr->InitializeRdDqs__VictimChipSelContinuousWrites = MemNInitializeRdDqs__VictimChipSelContinuousWritesUnb;
+  NBPtr->StartRdDqs__VictimContinuousWrites = MemNStartRdDqs__VictimContinuousWritesUnb;
+
+  NBPtr->IsSupported[SetSpareEn] = TRUE;
+  NBPtr->IsSupported[CheckSpareEn] = TRUE;
+  NBPtr->IsSupported[SetDllShutDown] = TRUE;
+  NBPtr->IsSupported[CheckEccDLLPwrDnConfig] = TRUE;
+  NBPtr->IsSupported[DimmBasedOnSpeed] = FALSE;
+  NBPtr->IsSupported[CheckMaxDramRate] = TRUE;
+  NBPtr->IsSupported[Check1GAlign] = FALSE;
+  NBPtr->IsSupported[CheckDisDllShutdownSR] = FALSE;
+  NBPtr->IsSupported[CheckMemClkCSPresent] = TRUE;
+  NBPtr->IsSupported[CheckMaxRdDqsDlyPtr] = TRUE;
+  NBPtr->IsSupported[CheckPhyFenceTraining] = TRUE;
+  NBPtr->IsSupported[CheckSendAllMRCmds] = TRUE;
+  NBPtr->IsSupported[CheckGetMCTSysAddr] = FALSE;
+  NBPtr->IsSupported[CheckFindPSOverideWithSocket] = TRUE;
+  NBPtr->IsSupported[CheckFindPSDct] = FALSE;
+  NBPtr->IsSupported[FenceTrnBeforeDramInit] = TRUE;
+  NBPtr->IsSupported[UnifiedNbFence] = TRUE;
+  NBPtr->IsSupported[CheckODTControls] = TRUE;
+  NBPtr->IsSupported[CheckDummyCLRead] = TRUE;
+  NBPtr->IsSupported[CheckDllStdBy] = FALSE;
+  NBPtr->IsSupported[CheckSlewWithMarginImprv] = FALSE;
+  NBPtr->IsSupported[CheckSlewWithoutMarginImprv] = TRUE;
+  NBPtr->IsSupported[CheckDllSpeedUp] = TRUE;
+  NBPtr->IsSupported[CheckDllRegDis] = FALSE;
+  NBPtr->IsSupported[PchgPDMode] = TRUE;
+  NBPtr->IsSupported[EccByteTraining] = TRUE;
+  NBPtr->IsSupported[CheckDramTerm] = TRUE;
+  NBPtr->IsSupported[CheckDramTermDyn] = TRUE;
+  NBPtr->IsSupported[CheckQoff] = TRUE;
+  NBPtr->IsSupported[CheckDrvImpCtrl] = TRUE;
+  NBPtr->IsSupported[CheckSetSameDctODTsEn] = TRUE;
+  NBPtr->IsSupported[WLSeedAdjust] = TRUE;
+  NBPtr->IsSupported[WLNegativeDelay] = TRUE;
+  NBPtr->IsSupported[TwoStageDramInit] = TRUE;
+  NBPtr->IsSupported[ForceEnMemHoleRemapping] = TRUE;
+  NBPtr->IsSupported[ProgramCsrComparator] = TRUE;
+  NBPtr->IsSupported[SetTDqsForx8DimmOnly] = TRUE;
+  NBPtr->IsSupported[WlRttNomFor1of3Cfg] = TRUE;
+
+  NBPtr->FamilySpecificHook[ExitPhyAssistedTraining] = MemNExitPhyAssistedTrainingOr;
+  NBPtr->FamilySpecificHook[DCTSelectSwitch] = MemNDctCfgSelectUnb;
+  NBPtr->FamilySpecificHook[ScrubberErratum] = MemNScrubberErratumOr;
+  NBPtr->FamilySpecificHook[AfterSaveRestore] = MemNAfterSaveRestoreUnb;
+  NBPtr->FamilySpecificHook[OverrideDataTxFifoWrDly] = MemNDataTxFifoWrDlyOverrideOr;
+  NBPtr->FamilySpecificHook[OverrideRcvEnSeed] = MemNOverrideRcvEnSeedOr;
+  NBPtr->FamilySpecificHook[OverrideRcvEnSeedPassN] = MemNOverrideRcvEnSeedPassNOr;
+  NBPtr->FamilySpecificHook[OverrideWLSeed] = MemNOverrideWLSeedOr;
+  NBPtr->FamilySpecificHook[AfterMemClkFreqChg] = MemNAfterMemClkFreqChgOr;
+  NBPtr->FamilySpecificHook[CalcWrDqDqsEarly] = MemNCalcWrDqDqsEarlyUnb;
+  NBPtr->FamilySpecificHook[TrainWlPerNibble] = MemNTrainWlPerNibbleOr;
+  NBPtr->FamilySpecificHook[TrainWlPerNibbleAdjustWLDly] = MemNTrainWlPerNibbleAdjustWLDlyOr;
+  NBPtr->FamilySpecificHook[TrainWlPerNibbleSeed] = MemNTrainWlPerNibbleSeedOr;
+  NBPtr->FamilySpecificHook[TrainRxEnPerNibble] = MemNTrainRxEnPerNibbleOr;
+  NBPtr->FamilySpecificHook[TrainRxEnAdjustDlyPerNibble] = MemNTrainRxEnAdjustDlyPerNibbleOr;
+  NBPtr->FamilySpecificHook[TrainRxEnGetAvgDlyPerNibble] = MemNTrainRxEnGetAvgDlyPerNibbleOr;
+  NBPtr->FamilySpecificHook[InitPerNibbleTrn] = MemNInitPerNibbleTrnOr;
+  NBPtr->FamilySpecificHook[TrainingNibbleZero] = MemNTrainingNibbleZeroOr;
+  NBPtr->FamilySpecificHook[BeforeSetCsTri] = MemNBeforeSetCsTriOr;
+  NBPtr->FamilySpecificHook[AdjustRdDqsDlyOffset] = MemNAdjustRdDqsDlyOffsetUnb;
+  NBPtr->FamilySpecificHook[EnableParityAfterMemRst] = MemNEnableParityAfterMemRstOr;
+  NBPtr->FamilySpecificHook[GetDdrMaxRate] = MemNGetMaxDdrRateUnb;
+  NBPtr->FamilySpecificHook[ProgOdtControl] = MemNProgOdtControlOr;
+  NBPtr->FamilySpecificHook[SetSkewMemClk] = MemNSetSkewMemClkUnb;
+  NBPtr->FamilySpecificHook[ReleaseNbPstate] = MemNReleaseNbPstateOr;
+  NBPtr->FamilySpecificHook[InitializeRxEnSeedlessTraining] = MemNInitializeRxEnSeedlessTrainingUnb;
+  NBPtr->FamilySpecificHook[TrackRxEnSeedlessRdWrNoWindBLError] = MemNTrackRxEnSeedlessRdWrNoWindBLErrorUnb;
+  NBPtr->FamilySpecificHook[TrackRxEnSeedlessRdWrSmallWindBLError] = MemNTrackRxEnSeedlessRdWrSmallWindBLErrorUnb;
+  NBPtr->FamilySpecificHook[InitialzeRxEnSeedlessByteLaneError] = MemNInitialzeRxEnSeedlessByteLaneErrorUnb;
+  NBPtr->FamilySpecificHook[AdjustWrDqsBeforeSeedScaling] = MemNAdjustWrDqsBeforeSeedScalingOr;
+  NBPtr->FamilySpecificHook[Adjust2DPhaseMaskBasedOnEcc] = MemNAdjust2DPhaseMaskBasedOnEccUnb;
+
+  PackageType = LibAmdGetPackageType (&(NBPtr->MemPtr->StdHeader));
+  if (PackageType == PACKAGE_TYPE_AM3r2) {
+    // AM3r2 does not support 1.35V
+    NBPtr->IsSupported[PerformanceOnly] = TRUE;
+
+    // AM3r2 does not support Dll shutdown
+    NBPtr->IsSupported[SetDllShutDown] = FALSE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the default values in the MEM_DATA_STRUCT
+ *
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+VOID
+MemNInitDefaultsOR (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT8 Socket;
+  UINT8 Channel;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  ASSERT (MemPtr != NULL);
+  RefPtr = MemPtr->ParameterListPtr;
+
+  // Memory Map/Mgt.
+  // Mask Bottom IO with 0xF8 to force hole size to have granularity of 128MB
+  RefPtr->BottomIo = 0xE0;
+  RefPtr->UmaMode = UserOptions.CfgUmaMode;
+  RefPtr->UmaSize = UserOptions.CfgUmaSize;
+  RefPtr->MemHoleRemapping = TRUE;
+  RefPtr->LimitMemoryToBelow1Tb = UserOptions.CfgLimitMemoryToBelow1Tb;
+  //
+
+
+  // Dram Timing
+  RefPtr->UserTimingMode = UserOptions.CfgTimingModeSelect;
+  RefPtr->MemClockValue = UserOptions.CfgMemoryClockSelect;
+  for (Socket = 0; Socket < MAX_SOCKETS_SUPPORTED; Socket++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_SOCKET; Channel++) {
+      MemPtr->SocketList[Socket].ChannelPtr[Channel] = NULL;
+      MemPtr->SocketList[Socket].TimingsPtr[Channel] = NULL;
+    }
+  }
+
+  // Memory Clear
+  RefPtr->EnableMemClr = TRUE;
+
+  // TableBasedAlterations
+  RefPtr->TableBasedAlterations = NULL;
+
+  // Platform config table
+  RefPtr->PlatformMemoryConfiguration = DefaultPlatformMemoryConfiguration;
+
+  // Memory Restore
+  RefPtr->MemRestoreCtl = FALSE;
+  RefPtr->SaveMemContextCtl = FALSE;
+  AmdS3ParamsInitializer (&RefPtr->MemContext);
+
+  // Dram Configuration
+  RefPtr->EnableBankIntlv = UserOptions.CfgMemoryEnableBankInterleaving;
+  RefPtr->EnableNodeIntlv = UserOptions.CfgMemoryEnableNodeInterleaving;
+  RefPtr->EnableChannelIntlv = UserOptions.CfgMemoryChannelInterleaving;
+  RefPtr->EnableBankSwizzle = UserOptions.CfgBankSwizzle;
+  RefPtr->EnableParity = UserOptions.CfgMemoryParityEnable;
+  RefPtr->EnableOnLineSpareCtl = UserOptions.CfgOnlineSpare;
+
+  // Dram Power
+  RefPtr->EnablePowerDown = UserOptions.CfgMemoryPowerDown;
+
+  // ECC
+  RefPtr->EnableEccFeature = UserOptions.CfgEnableEccFeature;
+
+  // Vref
+  RefPtr->ExternalVrefCtl = UserOptions.CfgExternalVrefCtlFeature;
+
+  //Training Mode
+  RefPtr->ForceTrainMode = UserOptions.CfgForceTrainMode;
+}
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function writes training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Pattern[] - Pattern to write
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNWritePatternOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUWriteCachelines (Address, Pattern, ClCount);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function reads training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Buffer[] - Buffer to fill
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNReadPatternOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUReadCachelines (Buffer, Address, ClCount);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates DQS training for Unified NB
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+memNEnableTrainSequenceOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN Retval;
+  Retval = TRUE;
+  if (!MemNIsIdSupportedOr (NBPtr, &(NBPtr->MemPtr->DiesPerSystem[NBPtr->MCTPtr->NodeId].LogicalCpuid))) {
+    Retval = FALSE;
+  }
+  return Retval;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function save the MR0 value sent to memory during initialization
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       MrsAddress   - MR0 value to be saved
+ *     @return         none
+ */
+VOID
+MemNSaveMR0Or (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 MrsAddress
+  )
+{
+  AGESA_STATUS Status;
+  LOCATE_HEAP_PTR LocateHeapStructPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  UINT32 ChipSel;
+  MR0_DATA_ARRAY_PTR pMR0Data;
+
+  ChipSel = NBPtr->GetBitField (NBPtr, BFMrsChipSel);
+  LocateHeapStructPtr.BufferHandle = AMD_MEM_S3_MR0_DATA_HANDLE;
+  LocateHeapStructPtr.BufferPtr = NULL;
+  Status = HeapLocateBuffer (&LocateHeapStructPtr, &NBPtr->MemPtr->StdHeader);
+  if (Status == AGESA_SUCCESS) {
+    // MR0 data already present in heap
+    pMR0Data = (MR0_DATA_ARRAY_PTR) (LocateHeapStructPtr.BufferPtr);
+    ASSERT (pMR0Data != NULL);
+  } else {
+    AllocHeapParams.RequestedBufferSize = sizeof (MR0_DATA_STRUCT) * MAX_NODES_SUPPORTED_OR * MAX_DCTS_PER_NODE_OR;
+    AllocHeapParams.BufferHandle = AMD_MEM_S3_MR0_DATA_HANDLE;
+    AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+
+    //
+    // Allocate data buffer in heap
+    //
+    Status = HeapAllocateBuffer (&AllocHeapParams, &NBPtr->MemPtr->StdHeader);
+    ASSERT (Status == AGESA_SUCCESS);
+    pMR0Data = (MR0_DATA_ARRAY_PTR) (AllocHeapParams.BufferPtr);
+    ASSERT (pMR0Data != NULL);
+    LibAmdMemFill (pMR0Data, 0, sizeof (MR0_DATA_STRUCT) * MAX_NODES_SUPPORTED_OR * MAX_DCTS_PER_NODE_OR, &NBPtr->MemPtr->StdHeader);
+  }
+  (*pMR0Data)[NBPtr->Node][NBPtr->Dct].MR0Value = (UINT16) MrsAddress;
+  (*pMR0Data)[NBPtr->Node][NBPtr->Dct].ChipSelEnMap |= (((UINT16)1) << ChipSel);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tLog last MR0\n\t\tNode: %d, Dct: %d, CS: %d, MR0: %08X\n", NBPtr->Node, NBPtr->Dct, ChipSel, MrsAddress);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnor.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnor.h
new file mode 100644
index 0000000000..7ac0dc95bb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnor.h
@@ -0,0 +1,361 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnor.h
+ *
+ * Northbridge Orochi
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 60556 $ @e \$Date: 2011-10-17 20:19:58 -0600 (Mon, 17 Oct 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MNOR_H_
+#define _MNOR_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_CHANNELS_PER_SOCKET_OR    4
+#define MAX_DCTS_PER_NODE_OR          2
+#define MAX_CHANNELS_PER_DCT_OR       1
+#define MAX_NODES_SUPPORTED_OR        8
+
+#define DEFAULT_WR_ODT_OR 6
+#define DEFAULT_RD_ODT_OR 6
+
+#define GetBufDatDly     0
+#define GetBufDatDlySkew 1
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/// Data Structure of Parameters for MR0 PPD set during S3 resume
+typedef struct {
+  UINT16 MR0Value;                 ///< MRO Value saved during memory initialization
+  UINT16 ChipSelEnMap;             ///< Bitmap of Enabled Chip Select per DCT
+} MR0_DATA_STRUCT;
+
+typedef MR0_DATA_STRUCT (*MR0_DATA_ARRAY_PTR)[MAX_NODES_SUPPORTED_OR][MAX_DCTS_PER_NODE_OR];
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemConstructNBBlockOR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemNInitNBDataOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitDefaultsOR (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+BOOLEAN
+MemNFinalizeMctOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNAutoConfigOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNOtherTimingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitPhyCompOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNWritePatternOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemNReadPatternOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemNInitNBRegTableOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   TSEFO NBRegTable[]
+  );
+
+UINT8
+MemNGetSocketRelativeChannelOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct,
+  IN       UINT8 Channel
+  );
+
+BOOLEAN
+MemNIsIdSupportedOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+UINT32
+MemNCmnGetSetFieldOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+BOOLEAN
+memNEnableTrainSequenceOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNTechBlockSwitchOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNScrubberErratumOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+VOID
+MemNAfterDQSTrainingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNDataTxFifoWrDlyOverrideOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+VOID
+MemNCapSpeedBatteryLifeOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNGetMaxLatParamsOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly,
+  IN OUT   UINT16 *MinDlyPtr,
+  IN OUT   UINT16 *MaxDlyPtr,
+  IN OUT   UINT16 *DlyBiasPtr
+  );
+
+VOID
+MemNSetMaxLatencyOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly
+  );
+
+BOOLEAN
+MemNExitPhyAssistedTrainingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemNOverrideRcvEnSeedOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *SeedPtr
+  );
+
+BOOLEAN
+MemNOverrideRcvEnSeedPassNOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *SeedTotal
+  );
+
+BOOLEAN
+MemNOverrideWLSeedOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *SeedPtr
+  );
+
+BOOLEAN
+MemNAfterMemClkFreqChgOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+
+BOOLEAN
+MemNTrainWlPerNibbleOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *Dimm
+  );
+
+BOOLEAN
+MemNTrainWlPerNibbleAdjustWLDlyOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *Delay
+  );
+
+VOID
+MemNBeforeDQSTrainingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNTrainRxEnPerNibbleOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *ChipSel
+  );
+
+BOOLEAN
+MemNTrainRxEnAdjustDlyPerNibbleOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *RcvEnDly
+  );
+
+BOOLEAN
+MemNTrainRxEnGetAvgDlyPerNibbleOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemNInitPerNibbleTrnOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemNTrainWlPerNibbleSeedOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *WrDqsDly
+  );
+
+BOOLEAN
+MemNTrainingNibbleZeroOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *ChipSel
+  );
+
+BOOLEAN
+MemNBeforeSetCsTriOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *CsTriBitmap
+  );
+
+BOOLEAN
+MemNEnableParityAfterMemRstOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemNProgOdtControlOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+VOID
+MemNBeforeDramInitOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNPFenceAdjustOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   INT16 *Value16
+  );
+
+BOOLEAN
+MemNReleaseNbPstateOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+VOID
+MemNSaveMR0Or (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 MrsAddress
+  );
+
+UINT32
+MemNCalBufDatDelaySkewOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8   GetDelay
+  );
+
+VOID
+MemNPowerDownCtlOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNAdjustWrDqsBeforeSeedScalingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *WrDqsBias
+  );
+
+#endif  /* _MNOR_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnotor.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnotor.c
new file mode 100644
index 0000000000..ef7934cce1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnotor.c
@@ -0,0 +1,280 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnotor.c
+ *
+ * Northbridge Non-SPD timings for Orochi
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/OR)
+ * @e \$Revision: 51485 $ @e \$Date: 2011-04-23 15:12:38 -0600 (Sat, 23 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnor.h"
+#include "mu.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_OR_MNOTOR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemNSetOtherTimingOR (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the non-SPD timings
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNOtherTimingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Programming of Non-SPD Timings.\n");
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctDimmValid > 0) {
+      MemNSetOtherTimingOR (NBPtr);
+    }
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the non-SPD timings  in PCI registers
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNSetOtherTimingOR (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  INT8 ROD;
+  INT8 WOD;
+  INT8 LD;
+  INT8 WrEarly;
+  BOOLEAN FourRankRDimms;
+  INT8 CDDTrdrdSdDc;
+  INT8 CDDTrdrdDd;
+  INT8 CDDTwrwrDd;
+  INT8 CDDTwrwrSdDc;
+  INT8 CDDTrwtTO;
+  INT8 CDDTwrrd;
+  UINT8 TrdrdSdDc;
+  UINT8 TrdrdDd;
+  UINT8 TwrwrSdDc;
+  UINT8 TwrwrDd;
+  UINT8 TrdrdSdSc;
+  UINT8 TwrwrSdSc;
+  UINT8 Twrrd;
+  UINT8 TrwtTO;
+  UINT8 BufDatDelay;
+
+  CH_DEF_STRUCT *ChannelPtr;
+  ChannelPtr = NBPtr->ChannelPtr;
+  //
+  // Latency Difference (LD) = Tcl - Tcwl
+  //
+  LD = (INT8) (MemNGetBitFieldNb (NBPtr, BFTcl)) - (INT8) (MemNGetBitFieldNb (NBPtr, BFTcwl));
+
+  //
+  // Read ODT Delay (ROD) = MAX ( 0, (RdOdtOnDuration - 6))
+  //
+  ROD = MAX (0, (INT8) (MemNGetBitFieldNb (NBPtr, BFRdOdtOnDuration) - 6));
+  //
+  // Write ODT Delay (WOD) = MAX (0, (WrOdtOnDuration - 6))
+  //
+  WOD = MAX (0, (INT8) (MemNGetBitFieldNb (NBPtr, BFWrOdtOnDuration) - 6));
+  //
+  // WrEarly = ABS (WrDqDqsEarly) - This is in half clocks to preserve precision.  Must be converted to whole clocks when used in equations below.
+  //
+  WrEarly = (INT8) MemNGetBitFieldNb (NBPtr, BFWrDqDqsEarly);
+  //
+  // BufDatDelay = IF LRDIMM [LRDIMM Module Delay Time SPD Bytes] ELSE 0 ENDIF.
+  //
+  BufDatDelay = (NBPtr->MCTPtr->Status[SbLrdimms]) ? (UINT8) MemNCalBufDatDelaySkewOr (NBPtr, GetBufDatDly): 0;
+  //
+  // FourRankRDimms
+  //
+  FourRankRDimms = ((MemNGetBitFieldNb (NBPtr, BFFourRankRDimm1) == 1) ||
+                    (MemNGetBitFieldNb (NBPtr, BFFourRankRDimm0) == 1)) ? TRUE : FALSE;
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tLD: %d     ROD: %d     WOD: %d     WrEarly: %d\n\n", LD, ROD, WOD, WrEarly);
+  //
+  // Read to Read Timing (TrdrdSdSc, TrdrdScDc, TrdrdDd)
+  //
+  // TrdrdSdSc = 1.
+  // TrdrdSdDc = MAX(TrdrdSdSc, 3 + (IF (D18F2x94_dct[1:0][FourRankRDimm1] | D18F2x94_dct[1:0][FourRankRDimm0])
+  //             THEN (CEIL(CDDTrdrdSdDc / 2 ) + 0.5) ELSE 0 ENDIF.))
+  // TrdrdDd =   MAX(TrdrdSdDc, CEIL(MAX(ROD + 3, CDDTrdrdDd / 2 + 3.5))).
+  TrdrdSdSc = 1;
+
+  CDDTrdrdSdDc = (INT8) MemNCalcCDDNb (NBPtr, AccessRcvEnDly, AccessRcvEnDly, TRUE, FALSE);
+  TrdrdSdDc = MAX (TrdrdSdSc, (FourRankRDimms ? (CDDTrdrdSdDc + 7 + 1) / 2 : 3));
+
+  CDDTrdrdDd = (INT8) MemNCalcCDDNb (NBPtr, AccessRcvEnDly, AccessRcvEnDly, FALSE, TRUE);
+  TrdrdDd = (UINT8) MAX (TrdrdSdDc, MAX (ROD + 3, (CDDTrdrdDd + 7 + 1) / 2 ));
+
+  MemNSetBitFieldNb (NBPtr, BFTrdrdDd, (UINT32) TrdrdDd);
+  MemNSetBitFieldNb (NBPtr, BFTrdrdSdDc, (UINT32) TrdrdSdDc);
+  MemNSetBitFieldNb (NBPtr, BFTrdrdSdSc, (UINT32) TrdrdSdSc);
+  //
+  // Write to Write Timing (TwrwrSdSc, TwrwrScDc, TwrwrDd
+  //
+  // TwrwrSdSc = 1.
+  // TwrwrSdDc = MAX(TwrwrSdSc, CEIL(MAX(WOD + 3, CDDTwrwrSdDc / 2 +
+  //  (IF (D18F2x94_dct[1:0][FourRankRDimm1] | D18F2x94_dct[1:0][FourRankRDimm0])
+  //   THEN 3.5 ELSE 3 ENDIF)))).
+  // TwrwrDd = MAX(TwrwrSdDc, CEIL(MAX(WOD + 3, CDDTwrwrDd / 2 + 3.5))).
+  //
+  TwrwrSdSc = 1;
+  CDDTwrwrSdDc = (INT8) MemNCalcCDDNb (NBPtr, AccessWrDqsDly, AccessWrDqsDly, TRUE, FALSE);
+  TwrwrSdDc = (UINT8) MAX (WOD + 3, (CDDTwrwrSdDc  + (FourRankRDimms ? 7 : 6) + 1 ) / 2) ;
+  CDDTwrwrDd = (INT8) MemNCalcCDDNb (NBPtr, AccessWrDqsDly, AccessWrDqsDly, FALSE, TRUE);
+  TwrwrDd = MAX ( TwrwrSdDc,  MAX ((UINT8) (WOD + 3), (CDDTwrwrDd + 7 + 1) / 2));
+
+  MemNSetBitFieldNb (NBPtr, BFTwrwrDd, (UINT32) TwrwrDd);
+  MemNSetBitFieldNb (NBPtr, BFTwrwrSdDc, (UINT32) TwrwrSdDc);
+  MemNSetBitFieldNb (NBPtr, BFTwrwrSdSc, (UINT32) TwrwrSdSc);
+  //
+  // Write to Read DIMM Termination Turn-around
+  //
+  // IF (LRDIMM) THEN
+  //   Twrrd (in MEMCLKs) = MAX(1, CEIL(MAX(WOD - BufDatDelay, CDDTwrrd / 2 + 0.5 - WrEarly, (DdrRate >= 1866 ? 1 : 0)) - LD + 3))
+  // ELSE
+  //   Twrrd = MAX ( 1, CEIL (MAX (WOD, (CDDTwrrd / 2) + 0.5 - WrEarly) - LD + 3))
+  CDDTwrrd = (INT8) MemNCalcCDDNb (NBPtr, AccessWrDqsDly, AccessRcvEnDly, FALSE, TRUE);
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    Twrrd =  MAX (1, MAX (WOD - BufDatDelay, MAX ((CDDTwrrd + 1 + 1 - WrEarly) / 2, (NBPtr->DCTPtr->Timings.Speed >= DDR1866_FREQUENCY ? 1 : 0))) - LD + 3);
+  } else {
+    Twrrd =  MAX (1, MAX (WOD, (CDDTwrrd + 1 + 1 - WrEarly) / 2) - LD + 3);
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFTwrrd, (UINT32) Twrrd);
+  //
+  // Read to Write Turnaround for Data, DQS Contention
+  //
+  // TrwtTO = CEIL (MAX (ROD, (CDDTrwtTO / 2) - 0.5 + WrEarly) + LD + 3)
+  //
+  CDDTrwtTO = (INT8) MemNCalcCDDNb (NBPtr, AccessRcvEnDly, AccessWrDqsDly, TRUE, TRUE);
+
+  TrwtTO = MAX ( (ChannelPtr->Dimms == 1 ? 0 : ROD + BufDatDelay) , ((CDDTrwtTO - 1 + 1 + WrEarly) / 2) ) + LD + 3;
+
+  MemNSetBitFieldNb (NBPtr, BFTrwtTO, (UINT32) TrwtTO);
+  //
+  // Read to Write Turnaround for opportunistic Write Bursting
+  //
+  // TrwtWB = TrwtTO + 1
+  //
+  MemNSetBitFieldNb (NBPtr, BFTrwtWB, (UINT32) TrwtTO + 1);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t                            TrdrdSdSc : %02x\n", TrdrdSdSc);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTrdrdSdDc : %02x           TrdrdSdDc : %02x\n", CDDTrdrdSdDc, TrdrdSdDc);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTrdrdDd   : %02x           TrdrdDd   : %02x\n\n", CDDTrdrdDd, TrdrdDd);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t                            TwrwrSdSc  : %02x\n", TwrwrSdSc);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTwrwrSdDc : %02x           TwrwrSdDc : %02x\n", CDDTwrwrSdDc, TwrwrSdDc );
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTwrwrDd   : %02x           TwrwrDd   : %02x\n\n", CDDTwrwrDd, TwrwrDd);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t                            TrwtWB    : %02x\n", TrwtTO + 1);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTwrrd     : %02x           Twrrd     : %02x\n", (UINT8) CDDTwrrd, (UINT8) Twrrd );
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTrwtTO    : %02x           TrwtTO    : %02x\n\n", (UINT8) CDDTrwtTO, (UINT8) TrwtTO );
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnpartrainor.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnpartrainor.c
new file mode 100644
index 0000000000..eb5ccb3bb4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnpartrainor.c
@@ -0,0 +1,219 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnParTrainOr.c
+ *
+ * Feature which performs Memory DQS training on each node with each node training
+ * its own memory through code running on a core in the associated processor.
+ * This way memory can be trained in parallel by more than one processor.
+ *
+ * This file contains the Orochi specific parallel training function.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/HCTRN)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+  *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnor.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuApicUtilities.h"
+#include "mfParallelTraining.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_OR_MNPARTRAINOR_FILECODE
+/*-----------------------------------------------------------------------------
+*                                EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+BOOLEAN
+MemFParallelTrainingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+STATIC
+MemConstructRemoteNBBlockOR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       DIE_STRUCT *MCTPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr
+);
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *       This is the training function which set up the environment for remote
+ * training on the ap and launches the remote routine.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  Launch training on AP successfully.
+ *     @return          FALSE - Fail to launch training on AP.
+ */
+BOOLEAN
+MemFParallelTrainingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  AMD_CONFIG_PARAMS *StdHeader;
+  DIE_STRUCT *MCTPtr;
+  REMOTE_TRAINING_ENV *EnvPtr;
+  AP_TASK TrainingTask;
+  UINT8 Socket;
+  UINT8 Module;
+  UINT8 APCore;
+  UINT8 p;
+  UINT32 LowCore;
+  UINT32 HighCore;
+  UINT32 BspSocket;
+  UINT32 BspModule;
+  UINT32 BspCore;
+  AGESA_STATUS Status;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  UINT16 MctDataSize;
+  StdHeader = &(NBPtr->MemPtr->StdHeader);
+  MCTPtr = NBPtr->MCTPtr;
+  Socket = MCTPtr->SocketId;
+  Module = MCTPtr->DieId;
+
+  //
+  // Allocate buffer for REMOTE_TRAINING_ENV
+  //
+  MctDataSize = MAX_DCTS_PER_NODE_OR * (
+                  sizeof (DCT_STRUCT) + (
+                    MAX_CHANNELS_PER_DCT_OR * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                  )
+                );
+  AllocHeapParams.RequestedBufferSize = MctDataSize + sizeof (REMOTE_TRAINING_ENV);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, Socket, Module, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+    EnvPtr = (REMOTE_TRAINING_ENV *) AllocHeapParams.BufferPtr;
+    AllocHeapParams.BufferPtr += sizeof (REMOTE_TRAINING_ENV);
+
+    //
+    // Setup Remote training environment
+    //
+    LibAmdMemCopy (&(EnvPtr->StdHeader), StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+    LibAmdMemCopy (&(EnvPtr->DieStruct), MCTPtr, sizeof (DIE_STRUCT), StdHeader);
+    for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+      EnvPtr->GetPlatformCfg[p] = NBPtr->MemPtr->GetPlatformCfg[p];
+    }
+    EnvPtr->ErrorHandling = NBPtr->MemPtr->ErrorHandling;
+    EnvPtr->NBBlockCtor = MemConstructRemoteNBBlockOR;
+    EnvPtr->FeatPtr = NBPtr->FeatPtr;
+    EnvPtr->HoleBase = NBPtr->RefPtr->HoleBase;
+    EnvPtr->BottomIo = NBPtr->RefPtr->BottomIo;
+    EnvPtr->UmaSize = NBPtr->RefPtr->UmaSize;
+    EnvPtr->SysLimit = NBPtr->RefPtr->SysLimit;
+    EnvPtr->TableBasedAlterations = NBPtr->RefPtr->TableBasedAlterations;
+    EnvPtr->PlatformMemoryConfiguration = NBPtr->RefPtr->PlatformMemoryConfiguration;
+
+    LibAmdMemCopy (AllocHeapParams.BufferPtr, MCTPtr->DctData, MctDataSize, StdHeader);
+
+    //
+    // Get Socket, Core of the BSP
+    //
+    IdentifyCore (StdHeader, &BspSocket, &BspModule, &BspCore, &Status);
+    EnvPtr->BspSocket = ((UINT8)BspSocket & 0x000000FF);
+    EnvPtr->BspCore = ((UINT8)BspCore & 0x000000FF);
+
+    //
+    // Set up the remote task structure
+    //
+    TrainingTask.DataTransfer.DataPtr = EnvPtr;
+    TrainingTask.DataTransfer.DataSizeInDwords = (UINT16) (AllocHeapParams.RequestedBufferSize + 3) / 4;
+    TrainingTask.DataTransfer.DataTransferFlags = 0;
+    TrainingTask.ExeFlags = 0;
+    TrainingTask.FuncAddress.PfApTaskI = (PF_AP_TASK_I)MemFParallelTraining;
+
+    //
+    // Get Target AP Core
+    //
+    GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader);
+    APCore = (UINT8) (LowCore & 0x000000FF);
+
+    //
+    // Launch Remote Training
+    //
+    ApUtilRunCodeOnSocketCore (Socket, APCore, &TrainingTask, StdHeader);
+
+    HeapDeallocateBuffer (AllocHeapParams.BufferHandle, StdHeader);
+
+    return TRUE;
+  } else {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV, NBPtr->Node, 0, 0, 0, StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    ASSERT(FALSE); // Could not allocated heap space for "REMOTE_TRAINING_ENV"
+    return FALSE;
+  }
+}
+
+BOOLEAN
+STATIC
+MemConstructRemoteNBBlockOR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       DIE_STRUCT *MCTPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr
+  )
+{
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+
+  MemNInitNBDataOr (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+  FeatPtr->InitHwRxEn (NBPtr);
+  MemNSwitchDCTNb (NBPtr, 0);
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnphyor.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnphyor.c
new file mode 100644
index 0000000000..d154e2f2cc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnphyor.c
@@ -0,0 +1,849 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnphyor.c
+ *
+ * Northbridge Phy support for Orochi
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/OR)
+ * @e \$Revision: 58126 $ @e \$Date: 2011-08-21 23:38:29 -0600 (Sun, 21 Aug 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "ma.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnor.h"
+#include "cpuRegisters.h"
+#include "PlatformMemoryConfiguration.h"
+#include "F15PackageType.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_OR_MNPHYOR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+
+
+/// The structure of TxPrePN tables
+typedef struct {
+  UINT32 Speed;                          ///< Applied memory speed
+  UINT16 TxPrePNVal[4];                  ///< Table values
+} TXPREPN_STRUCT;
+
+/// The entry of individual TxPrePN tables
+typedef struct {
+  UINT8 TxPrePNTblSize;                  ///< Total Table size
+  CONST TXPREPN_STRUCT *TxPrePNTblPtr;   ///< Pointer to the table
+} TXPREPN_ENTRY;
+
+/// Type of an entry for processing phy init compensation for Orochi
+typedef struct {
+  BIT_FIELD_NAME IndexBitField;          ///< Bit field on which the value is decided
+  BIT_FIELD_NAME StartTargetBitField;    ///< First bit field to be modified
+  BIT_FIELD_NAME EndTargetBitField;      ///< Last bit field to be modified
+  UINT16 ExtraValue;                     ///< Extra value needed to be written to bit field
+  CONST TXPREPN_ENTRY *TxPrePN;          ///< Pointer to slew rate table
+} PHY_COMP_INIT_NB;
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the DDR phy compensation logic
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitPhyCompOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  //
+  // Phy Predriver Calibration Codes for Data/DQS
+  //
+  CONST STATIC TXPREPN_STRUCT TxPrePNDataDqsV15Or[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.5V
+    {DDR667 + DDR800, {0x924, 0x924, 0x924, 0x924}},
+    {DDR1066 + DDR1333, {0xFF6, 0xFF6, 0xFF6, 0xFF6}},
+    {DDR1600 + DDR1866, {0xFF6, 0xFF6, 0xFF6, 0xFF6}}
+  };
+  CONST STATIC TXPREPN_STRUCT TxPrePNDataDqsV135Or[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.35V
+    {DDR667 + DDR800, {0xFF6, 0xB6D, 0xB6D, 0x924}},
+    {DDR1066 + DDR1333, {0xFF6, 0xFF6, 0xFF6, 0xFF6}},
+    {DDR1600 + DDR1866, {0xFF6, 0xFF6, 0xFF6, 0xFF6}}
+  };
+  CONST STATIC TXPREPN_STRUCT TxPrePNDataDqsV125Or[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.25V
+    {DDR667 + DDR800, {0xFF6, 0xDAD, 0xDAD, 0x924}},
+    {DDR1066 + DDR1333, {0xFF6, 0xFF6, 0xFF6, 0xFF6}},
+    {DDR1600 + DDR1866, {0xFF6, 0xFF6, 0xFF6, 0xFF6}}
+  };
+  CONST STATIC TXPREPN_ENTRY TxPrePNDataDqsOr[] = {
+    {GET_SIZE_OF (TxPrePNDataDqsV15Or), (TXPREPN_STRUCT *)&TxPrePNDataDqsV15Or},
+    {GET_SIZE_OF (TxPrePNDataDqsV135Or), (TXPREPN_STRUCT *)&TxPrePNDataDqsV135Or},
+    {GET_SIZE_OF (TxPrePNDataDqsV125Or), (TXPREPN_STRUCT *)&TxPrePNDataDqsV125Or}
+  };
+
+  //
+  // Phy Predriver Calibration Codes for Data/DQS
+  //
+  CONST STATIC TXPREPN_STRUCT TxPrePNDataDqsV15OrB1[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.5V
+    {DDR667 + DDR800, {0xB6D, 0x6DB, 0x492, 0x492}},
+    {DDR1066 + DDR1333, {0xFFF, 0x924, 0x6DB, 0x6DB}},
+    {DDR1600 + DDR1866, {0xFFF, 0xFFF, 0xFFF, 0xB6D}}
+  };
+  CONST STATIC TXPREPN_STRUCT TxPrePNDataDqsV135OrB1[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.35V
+    {DDR667 + DDR800, {0xFFF, 0x924, 0x6DB, 0x492}},
+    {DDR1066 + DDR1333, {0xFFF, 0xDB6, 0xB6D, 0x6DB}},
+    {DDR1600 + DDR1866, {0xFFF, 0xFFF, 0xFFF, 0xDB6}}
+  };
+  CONST STATIC TXPREPN_STRUCT TxPrePNDataDqsV125OrB1[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.25V
+    {DDR667 + DDR800, {0xFFF, 0xB6D, 0x924, 0x6DB}},
+    {DDR1066 + DDR1333, {0xFFF, 0xFFF, 0xDB6, 0x924}},
+    {DDR1600 + DDR1866, {0xFFF, 0xFFF, 0xFFF, 0xFFF}}
+  };
+  CONST STATIC TXPREPN_ENTRY TxPrePNDataDqsOrB1[] = {
+    {GET_SIZE_OF (TxPrePNDataDqsV15OrB1), (TXPREPN_STRUCT *)&TxPrePNDataDqsV15OrB1},
+    {GET_SIZE_OF (TxPrePNDataDqsV135OrB1), (TXPREPN_STRUCT *)&TxPrePNDataDqsV135OrB1},
+    {GET_SIZE_OF (TxPrePNDataDqsV125OrB1), (TXPREPN_STRUCT *)&TxPrePNDataDqsV125OrB1}
+  };
+
+  //
+  // Phy Predriver Calibration Codes for Cmd/Addr
+  //
+  CONST STATIC TXPREPN_STRUCT TxPrePNCmdAddrV15Or[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.5V
+    {DDR667 + DDR800, {0x492, 0x492, 0x492, 0x492}},
+    {DDR1066 + DDR1333, {0x6DB, 0x6DB, 0x6DB, 0x6DB}},
+    {DDR1600 + DDR1866, {0xB6D, 0xB6D, 0xB6D, 0xB6D}}
+  };
+  CONST STATIC TXPREPN_STRUCT TxPrePNCmdAddrV135Or[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.35V
+    {DDR667 + DDR800, {0x492, 0x492, 0x492, 0x492}},
+    {DDR1066 + DDR1333, {0x924, 0x6DB, 0x6DB, 0x6DB}},
+    {DDR1600 + DDR1866, {0xB6D, 0xB6D, 0x924, 0x924}}
+  };
+  CONST STATIC TXPREPN_STRUCT TxPrePNCmdAddrV125Or[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.25V
+    {DDR667 + DDR800, {0x492, 0x492, 0x492, 0x492}},
+    {DDR1066 + DDR1333, {0xDAD, 0x924, 0x6DB, 0x492}},
+    {DDR1600 + DDR1866, {0xFF6, 0xDAD, 0xB64, 0xB64}}
+  };
+  CONST STATIC TXPREPN_ENTRY TxPrePNCmdAddrOr[] = {
+    {GET_SIZE_OF (TxPrePNCmdAddrV15Or), (TXPREPN_STRUCT *)&TxPrePNCmdAddrV15Or},
+    {GET_SIZE_OF (TxPrePNCmdAddrV135Or), (TXPREPN_STRUCT *)&TxPrePNCmdAddrV135Or},
+    {GET_SIZE_OF (TxPrePNCmdAddrV125Or), (TXPREPN_STRUCT *)&TxPrePNCmdAddrV125Or}
+  };
+
+  //
+  // Phy Predriver Calibration Codes for Clock
+  //
+  CONST STATIC TXPREPN_STRUCT TxPrePNClockV15Or[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.5V
+    {DDR667 + DDR800, {0x924, 0x924, 0x924, 0x924}},
+    {DDR1066 + DDR1333, {0xFF6, 0xFF6, 0xFF6, 0xB6D}},
+    {DDR1600 + DDR1866, {0xFF6, 0xFF6, 0xFF6, 0xFF6}}
+  };
+  CONST STATIC TXPREPN_STRUCT TxPrePNClockV135Or[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.35V
+    {DDR667 + DDR800, {0xDAD, 0xDAD, 0x924, 0x924}},
+    {DDR1066 + DDR1333, {0xFF6, 0xFF6, 0xFF6, 0xDAD}},
+    {DDR1600 + DDR1866, {0xFF6, 0xFF6, 0xFF6, 0xDAD}}
+  };
+  CONST STATIC TXPREPN_STRUCT TxPrePNClockV125Or[] = {
+    //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.25V
+    {DDR667 + DDR800, {0xDAD, 0xDAD, 0x924, 0x924}},
+    {DDR1066 + DDR1333, {0xFF6, 0xFF6, 0xFF6, 0xFF6}},
+    {DDR1600 + DDR1866, {0xFF6, 0xFF6, 0xFF6, 0xFF6}}
+  };
+  CONST STATIC TXPREPN_ENTRY TxPrePNClockOr[] = {
+    {GET_SIZE_OF (TxPrePNClockV15Or), (TXPREPN_STRUCT *)&TxPrePNClockV15Or},
+    {GET_SIZE_OF (TxPrePNClockV135Or), (TXPREPN_STRUCT *)&TxPrePNClockV135Or},
+    {GET_SIZE_OF (TxPrePNClockV125Or), (TXPREPN_STRUCT *)&TxPrePNClockV125Or}
+  };
+
+  //
+  // Tables to describe the relationship between drive strength bit fields, PreDriver Calibration bit fields and also
+  // the extra value that needs to be written to specific PreDriver bit fields
+  //
+  CONST PHY_COMP_INIT_NB PhyCompInitBitFieldOr[] = {
+    // 3. Program TxPreP/TxPreN for Data and DQS according toTable 46 if VDDIO is 1.5V or Table 47 if 1.35V.
+    //    A. Program D18F2x9C_x0D0F_0[F,8:0]0[A,6]_dct[1:0]={0000b, TxPreP, TxPreN}.
+    //    B. Program D18F2x9C_x0D0F_0[F,8:0]0[A,6]_dct[1:0]={0000b, TxPreP, TxPreN}.
+    {BFDqsDrvStren, BFDataByteTxPreDriverCal2Pad1, BFDataByteTxPreDriverCal2Pad1, 0, TxPrePNDataDqsOr},
+    {BFDataDrvStren, BFDataByteTxPreDriverCal2Pad2, BFDataByteTxPreDriverCal2Pad2, 0, TxPrePNDataDqsOr},
+    {BFDataDrvStren, BFDataByteTxPreDriverCal, BFDataByteTxPreDriverCal, 8, TxPrePNDataDqsOr},
+    // 4. Program TxPreP/TxPreN for Cmd/Addr according to Table 49 if VDDIO is 1.5V or Table 50 if 1.35V.
+    //    A. Program D18F2x9C_x0D0F_[C,8][1:0][12,0E,0A,06]_dct[1:0]={0000b, TxPreP, TxPreN}.
+    //    B. Program D18F2x9C_x0D0F_[C,8][1:0]02_dct[1:0]={1000b, TxPreP, TxPreN}.
+    {BFCsOdtDrvStren, BFCmdAddr0TxPreDriverCal2Pad1, BFCmdAddr0TxPreDriverCal2Pad2, 0, TxPrePNCmdAddrOr},
+    {BFAddrCmdDrvStren, BFCmdAddr1TxPreDriverCal2Pad1, BFAddrTxPreDriverCal2Pad4, 0, TxPrePNCmdAddrOr},
+    {BFCsOdtDrvStren, BFCmdAddr0TxPreDriverCalPad0, BFCmdAddr0TxPreDriverCalPad0, 8, TxPrePNCmdAddrOr},
+    {BFCkeDrvStren, BFAddrTxPreDriverCalPad0, BFAddrTxPreDriverCalPad0, 8, TxPrePNCmdAddrOr},
+    {BFAddrCmdDrvStren, BFCmdAddr1TxPreDriverCalPad0, BFCmdAddr1TxPreDriverCalPad0, 8, TxPrePNCmdAddrOr},
+    // 5. Program TxPreP/TxPreN for Clock according to Table 52 if VDDIO is 1.5V or Table 53 if 1.35V.
+    //    A. Program D18F2x9C_x0D0F_2[2:0]02_dct[1:0]={1000b, TxPreP, TxPreN}.
+    {BFClkDrvStren, BFClock0TxPreDriverCalPad0, BFClock2TxPreDriverCalPad0, 8, TxPrePNClockOr}
+  };
+
+  BIT_FIELD_NAME CurrentBitField;
+  UINT16 SpeedMask;
+  UINT8 SizeOfTable;
+  UINT8 Voltage;
+  UINT8 i;
+  UINT8 j;
+  UINT8 k;
+  UINT8 Dct;
+  CONST TXPREPN_STRUCT *TblPtr;
+
+  Dct = NBPtr->Dct;
+  NBPtr->SwitchDCT (NBPtr, 0);
+  // 1. Program D18F2x[1,0]9C_x0D0F_E003[DisAutoComp, DisablePreDriverCal] = {1b, 1b}.
+  MemNSetBitFieldNb (NBPtr, BFDisablePredriverCal, 0x6000);
+  NBPtr->SwitchDCT (NBPtr, Dct);
+
+  SpeedMask = (UINT16) 1 << (NBPtr->DCTPtr->Timings.Speed / 66);
+  Voltage = (UINT8) CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage);
+
+  for (j = 0; j < GET_SIZE_OF (PhyCompInitBitFieldOr); j ++) {
+    i = (UINT8) MemNGetBitFieldNb (NBPtr, PhyCompInitBitFieldOr[j].IndexBitField);
+    TblPtr = (PhyCompInitBitFieldOr[j].TxPrePN[Voltage]).TxPrePNTblPtr;
+    SizeOfTable = (PhyCompInitBitFieldOr[j].TxPrePN[Voltage]).TxPrePNTblSize;
+
+    // Uses different TxPrePNDataDqsOr table for OR B1 and later
+    if (((NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F15_OR_LT_B1) == 0) &&
+        (PhyCompInitBitFieldOr[j].TxPrePN == TxPrePNDataDqsOr)) {
+      ASSERT (Voltage < sizeof (TxPrePNDataDqsOrB1) / sizeof (TxPrePNDataDqsOrB1[0]));
+      TblPtr = TxPrePNDataDqsOrB1[Voltage].TxPrePNTblPtr;
+      SizeOfTable = TxPrePNDataDqsOrB1[Voltage].TxPrePNTblSize;
+    }
+
+    for (k = 0; k < SizeOfTable; k++, TblPtr++) {
+      if ((TblPtr->Speed & SpeedMask) != 0) {
+        for (CurrentBitField = PhyCompInitBitFieldOr[j].StartTargetBitField; CurrentBitField <= PhyCompInitBitFieldOr[j].EndTargetBitField; CurrentBitField ++) {
+          MemNSetBitFieldNb (NBPtr, CurrentBitField, ((PhyCompInitBitFieldOr[j].ExtraValue << 12) | TblPtr->TxPrePNVal[i]));
+        }
+        break;
+      }
+    }
+    // Asserting if no table is found corresponding to current memory speed.
+    ASSERT (k < SizeOfTable);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This is a general purpose function that executes before DRAM training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNBeforeDQSTrainingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8   Dct;
+  UINT32  PackageType;
+
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_OR; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      //
+      // 2.10.6.8.2 - BIOS should program D18F2x210_dct[1:0]_nbp[3:0][MaxRdLatency] to 55h.
+      //
+      MemNSetBitFieldNb (NBPtr, BFMaxLatency, 0x55);
+    }
+    MemNSetBitFieldNb (NBPtr, BFTraceModeEn, 0);
+  }
+
+  // DisDatMsk: Reset: 0. BIOS: IF (G34r1 || C32r1) THEN 1 ELSE 0 ENDIF.
+  PackageType = LibAmdGetPackageType (&(NBPtr->MemPtr->StdHeader));
+  if (PackageType != PACKAGE_TYPE_AM3r2) {
+    MemNSetBitFieldNb (NBPtr, BFDisDatMsk, 1);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This is a function that executes after DRAM training for Orochi
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNAfterDQSTrainingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 Dimm;
+  UINT8 Byte;
+  UINT16 Dly;
+  BOOLEAN DllShutDownEn;
+
+  DllShutDownEn = TRUE;
+  IDS_OPTION_HOOK (IDS_DLL_SHUT_DOWN, &DllShutDownEn, &(NBPtr->MemPtr->StdHeader));
+
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_OR; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      //
+      // 2.10.6.6 DCT Training Specific Configuration
+      //
+      MemNSetBitFieldNb (NBPtr, BFAddrCmdTriEn, 1);
+      MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 0);
+      if (DllShutDownEn && NBPtr->IsSupported[SetDllShutDown]) {
+        MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0);
+      }
+      MemNSetBitFieldNb (NBPtr , BFForceAutoPchg, 0);
+      MemNSetBitFieldNb (NBPtr , BFDynPageCloseEn, 0);
+      if (NBPtr->RefPtr->EnableBankSwizzle) {
+        MemNSetBitFieldNb (NBPtr, BFBankSwizzleMode, 1);
+      }
+      MemNSetBitFieldNb (NBPtr, BFDcqBypassMax, 0x0F);
+      MemNPowerDownCtlOr (NBPtr);
+      MemNSetBitFieldNb (NBPtr, BFDisSimulRdWr, 0);
+      MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 2);
+      //
+      // Post Training values for BFRxMaxDurDllNoLock, BFTxMaxDurDllNoLock,
+      //  and BFEnRxPadStandby are handled by Power savings code
+      //
+      // BFBwCapEn and BFODTSEn are handled by OnDimmThermal Code
+      //
+      // BFDctSelIntLvEn is programmed by Interleaving feature
+      //
+      // BFL3Scrub, BFDramScrub, and DramScrubReDirEn are programmed by ECC Feature code
+      //
+      //
+      MemNSetBitFieldNb (NBPtr, BFL3ScrbRedirDis, 0);
+      // Doing DataTxFifoWrDly override for NB PState 0
+      MemNDataTxFifoWrDlyOverrideOr (NBPtr, NBPtr);
+    }
+  }
+
+  //
+  // Synch RdDqs__Dly to RdDqsDly for S3 Save/Restore
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_OR; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      if (!(NBPtr->DctCachePtr->Is__x4)) {
+        // Only synch when 1D training has been performed or training with x8 DIMMs
+        for (Dimm = 0; Dimm < 4; Dimm++) {
+          for (Byte = 0; Byte < 9; Byte++) {
+            Dly = (UINT16) MemNGetTrainDlyNb (NBPtr, AccessRdDqsDly, DIMM_BYTE_ACCESS (Dimm, Byte));
+            MemNSetTrainDlyNb (NBPtr, AccessRdDqs__Dly, DIMM_NBBL_ACCESS (Dimm, Byte * 2), Dly);
+            MemNSetTrainDlyNb (NBPtr, AccessRdDqs__Dly, DIMM_NBBL_ACCESS (Dimm, (Byte * 2) + 1), Dly);
+            NBPtr->ChannelPtr->RdDqs__Dlys[(Dimm * MAX_NUMBER_LANES) + (Byte * 2)] = (UINT8) Dly;
+            NBPtr->ChannelPtr->RdDqs__Dlys[(Dimm * MAX_NUMBER_LANES) + (Byte * 2) + 1] = (UINT8) Dly;
+          }
+        }
+      }
+    }
+  }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function overrides the seed for hardware based RcvEn training of Orochi.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *SeedPtr - Pointer to the seed value.
+ *
+ *     @return    TRUE
+ */
+
+BOOLEAN
+MemNOverrideRcvEnSeedOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *SeedPtr
+  )
+{
+  UINT16 *SeedPointer;
+  SeedPointer = (UINT16*) SeedPtr;
+
+  //
+  // Get seed value saved in PS block
+  //
+  *SeedPointer = NBPtr->PsPtr->HWRxENSeedVal;
+  *SeedPointer -= (0x20 * (UINT16) MemNGetBitFieldNb (NBPtr, BFWrDqDqsEarly));
+
+  return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function overrides the seed for Pass N hardware based RcvEn training of Orochi.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *SeedTotal - Pointer to the SeedTotal
+ *
+ *     @return    TRUE
+ */
+
+BOOLEAN
+MemNOverrideRcvEnSeedPassNOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *SeedTotal
+  )
+{
+  UINT16 RegisterDelay;
+  UINT16 SeedTotalPreScaling;
+  UINT8 *SpdBufferPtr;
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    // LRDIMMs
+    NBPtr->TechPtr->GetDimmSpdBuffer (NBPtr->TechPtr, &SpdBufferPtr, (NBPtr->TechPtr->ChipSel >> 1));
+    RegisterDelay = 0x10 + (((SpdBufferPtr[67] & 1) == 0) ? (0x30 - (SpdBufferPtr[70] & 7)): 0x30);
+  } else if (NBPtr->MCTPtr->Status[SbRegistered]) {
+    // Registered
+    RegisterDelay = ((NBPtr->ChannelPtr->CtrlWrd02[(NBPtr->TechPtr->ChipSel >> 1)] & BIT0) == 0) ? 0x20: 0x30;
+  } else {
+    // UDIMMs
+    RegisterDelay = 0;
+  }
+  if (NBPtr->TechPtr->PrevPassRcvEnDly[NBPtr->TechPtr->Bytelane] < (0x20 + RegisterDelay)) {
+    SeedTotalPreScaling = 0x20 + RegisterDelay;
+  } else {
+    SeedTotalPreScaling = NBPtr->TechPtr->PrevPassRcvEnDly[NBPtr->TechPtr->Bytelane] - 0x20 - RegisterDelay;
+  }
+  *(UINT16*) SeedTotal = ((UINT16) (((UINT32) SeedTotalPreScaling * NBPtr->DCTPtr->Timings.Speed) / NBPtr->TechPtr->PrevSpeed)) + RegisterDelay;
+  return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function overrides the seed for write leveing training of Orochi.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *SeedPtr - Pointer to the seed value.
+ *
+ *     @return    TRUE
+ */
+
+BOOLEAN
+MemNOverrideWLSeedOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *SeedPtr
+  )
+{
+  DIE_STRUCT *MCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT8 RCW2;
+
+  MCTPtr = NBPtr->MCTPtr;
+  ChannelPtr = NBPtr->ChannelPtr;
+  RCW2 = ChannelPtr->CtrlWrd02[NBPtr->TechPtr->TargetDIMM];
+
+  //
+  // Get the default value of seed
+  //
+  if (ChannelPtr->SODimmPresent != 0) {
+    //
+    // SODIMMM
+    //
+    *(UINT8*) SeedPtr = 0x12;
+  } else {
+    //
+    // Get seed value saved in PS block
+    //
+    *(UINT8*) SeedPtr = NBPtr->PsPtr->WLSeedVal;
+
+    if (MCTPtr->Status[SbRegistered]) {
+      *(UINT8*) SeedPtr += ((RCW2 & BIT0) == 0) ? 0 : 0x10;
+    }
+  }
+
+  return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function enables nibble based training for Write Levelization for Orochi.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *Dimm - Pointer to DIMM to be trained
+ *
+ *     @return    TRUE
+ */
+
+BOOLEAN
+MemNTrainWlPerNibbleOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *Dimm
+  )
+{
+  UINT8 ByteLane;
+  if ((NBPtr->ChannelPtr->Dimmx4Present & (1 << *(UINT16*) Dimm)) != 0) {
+    if (NBPtr->TechPtr->TrnNibble <= NIBBLE_1) {
+      //For x4 DIMMs, BIOS trains both nibbles of a byte lane by programming
+      //D18F2x9C_x0000_0008_dct[1:0][TrNibbleSel] to specify the nibble. BIOS repeats steps 3 through
+      //5 and uses the average of the trained values for the delay setting.
+      if (NBPtr->TechPtr->TrnNibble == NIBBLE_1) {
+        NBPtr->SetBitField (NBPtr, BFTrNibbleSel, NBPtr->TechPtr->TrnNibble);
+      }
+      return FALSE;
+    } else {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrDqs: ");
+      for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8) ; ByteLane++) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", NBPtr->TechPtr->WlNibbleDly[ByteLane]);
+      }
+      IDS_HDT_CONSOLE (MEM_FLOW, "   <<< Nibble AVG\n\n");
+      return FALSE;
+    }
+  } else  {
+    return TRUE;
+  }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function adjusts the WL DQS Delay based on nibble traning results for Orochi.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *Delay - Pointer to Wr Dqs Delay
+ *
+ *     @return    FALSE - Supported
+ *     @return    TRUE - Not supported
+ */
+BOOLEAN
+MemNTrainWlPerNibbleAdjustWLDlyOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *Delay
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  UINT8 Bytelane;
+  TechPtr = NBPtr->TechPtr;
+  Bytelane = TechPtr->Bytelane;
+  if ((NBPtr->ChannelPtr->DimmNibbleAccess & (1 << TechPtr->TargetDIMM)) != 0) {
+    if (TechPtr->TrnNibble == NIBBLE_1) {
+      *(UINT8*) Delay = (TechPtr->WlNibbleDly[Bytelane] + *(UINT8*) Delay + 1) / 2;
+      if (Bytelane == (NBPtr->MCTPtr->Status[SbEccDimms] ? 8 : 7)) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "   <<< Nibble 1");
+      }
+    } else {
+      if (Bytelane == (NBPtr->MCTPtr->Status[SbEccDimms] ? 8 : 7)) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "   <<< Nibble 0");
+      }
+    }
+    TechPtr->WlNibbleDly[Bytelane] = *(UINT8*) Delay;
+    return FALSE;
+  } else {
+    return TRUE;
+  }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function sets the correct seed for Nibble based Write Levelization.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *WrDqsDly   - Pointer to WrDqs value
+ *
+ *     @return    FALSE - Supported
+ *     @return    TRUE - Not supported
+ */
+
+BOOLEAN
+MemNTrainWlPerNibbleSeedOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *WrDqsDly
+  )
+{
+  if (NBPtr->TechPtr->TrnNibble == NIBBLE_0) {
+    NBPtr->TechPtr->WlNibble0Seed[NBPtr->TechPtr->Bytelane] = *(UINT16*) WrDqsDly;
+  } else {
+    *(UINT16*) WrDqsDly = NBPtr->TechPtr->WlNibble0Seed[NBPtr->TechPtr->Bytelane];
+  }
+  return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function initializes nibble based Receiver Enable Training for Orochi.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *OptParam - Optional paramater
+ *
+ *     @return    FALSE - Supported
+ *     @return    TRUE - Not supported
+ */
+BOOLEAN
+MemNInitPerNibbleTrnOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  // Program D18F2x9C_x0000_0008_dct[1:0][TrNibbleSel]=0
+  NBPtr->TechPtr->TrnNibble = NIBBLE_0;
+  NBPtr->SetBitField (NBPtr, BFTrNibbleSel, NIBBLE_0);
+  return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function enables nibble based Receiver Enable Training for Orochi.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *ChipSel - Pointer to ChipSel to be trained
+ *
+ *     @return    FALSE - Supported
+ *     @return    TRUE - Not supported
+ */
+
+BOOLEAN
+MemNTrainRxEnPerNibbleOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *ChipSel
+  )
+{
+  if ((NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (*(UINT16*) ChipSel >> 1))) != 0) {
+    if (NBPtr->TechPtr->TrnNibble == NIBBLE_1) {
+      // For x4 DIMMs, BIOS trains both nibbles of a byte lane by programming
+      // D18F2x9C_x0000_0008_dct[1:0][TrNibbleSel] to specify the nibble. BIOS repeats steps 2 through
+      // 7 and uses the average of the trained values for the delay setting.
+      NBPtr->SetBitField (NBPtr, BFTrNibbleSel, NBPtr->TechPtr->TrnNibble);
+    }
+    return FALSE;
+  } else {
+    return TRUE;
+  }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function adjusts the RxEn Delay based on nibble traning results for Orochi.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *RcvEnDly - Pointer to RcvEn Dqs Delay
+ *
+ *     @return    FALSE - Supported
+ *     @return    TRUE - Not supported
+ */
+BOOLEAN
+MemNTrainRxEnAdjustDlyPerNibbleOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *RcvEnDly
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  UINT8 Bytelane;
+  TechPtr = NBPtr->TechPtr;
+  Bytelane = TechPtr->Bytelane;
+  if ((NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) != 0) {
+    if (TechPtr->TrnNibble == NIBBLE_1) {
+      *(UINT16*) RcvEnDly = (TechPtr->RxEnNibbleDly[Bytelane] + *(UINT16*) RcvEnDly + 1) / 2;
+      if (Bytelane == (NBPtr->MCTPtr->Status[SbEccDimms] ? 8 : 7)) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "   <<< Nibble 1");
+      }
+      TechPtr->RxEnNibbleDly[Bytelane] = *(UINT16*) RcvEnDly;
+      return TRUE;
+    } else {
+      if (Bytelane == (NBPtr->MCTPtr->Status[SbEccDimms] ? 8 : 7)) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "   <<< Nibble 0");
+      }
+      TechPtr->RxEnNibbleDly[Bytelane] = *(UINT16*) RcvEnDly;
+      return FALSE;
+    }
+  } else {
+    return TRUE;
+  }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function calculates the average nibble based Receiver Enable Training for Orochi.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *OptParam   - Optional parameter
+ *
+ *     @return    FALSE - Supported
+ *     @return    TRUE - Not supported
+ */
+
+BOOLEAN
+MemNTrainRxEnGetAvgDlyPerNibbleOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 ByteLane;
+  if ((NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (NBPtr->TechPtr->ChipSel >> 1))) != 0) {
+    if (NBPtr->TechPtr->TrnNibble == NIBBLE_1) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t     RxEn: ");
+      for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8) ; ByteLane++) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", NBPtr->TechPtr->RxEnNibbleDly[ByteLane]);
+      }
+      IDS_HDT_CONSOLE (MEM_FLOW, "   <<< Nibble AVG\n\n");
+      return TRUE;
+    } else {
+      return FALSE;
+    }
+  } else {
+    return TRUE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function returns false if nibble training is being used and nibble 1
+ *     is being trained.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *ChipSel - Pointer to ChipSel to be trained
+ *
+ *     @return    FALSE - Supported
+ *     @return    TRUE - Not supported
+ */
+
+BOOLEAN
+MemNTrainingNibbleZeroOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *ChipSel
+  )
+{
+  if (((NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (NBPtr->TechPtr->ChipSel >> 1))) != 0) &&
+    (NBPtr->TechPtr->TrnNibble == NIBBLE_1)) {
+    return FALSE;
+  } else {
+    return TRUE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function adjusts Avg PRE value of Phy fence training for OR.
+ *
+ *     @param[in,out]   *NBPtr  - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *Value16 - Pointer to the value that we want to adjust
+ *
+ */
+VOID
+MemNPFenceAdjustOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   INT16 *Value16
+  )
+{
+  *Value16 += 2; //The Avg PRE value is subtracted by 6 only.
+  if (*Value16 < 0) {
+    *Value16 = 0;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function adjusts WrDqsBias before seed scaling
+ *
+ *     @param[in,out]   *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *WrDqsBias - Pointer to WrDqsBias
+ *
+ *     @return    FALSE - Supported
+ *     @return    TRUE - Not supported
+ */
+
+BOOLEAN
+MemNAdjustWrDqsBeforeSeedScalingOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *WrDqsBias
+  )
+{
+  // Subtract (0x20 * WrDqDqsEarly) since it is a non-scalable component
+  * (INT16 *) WrDqsBias = (INT16) (0x20 * MemNGetBitFieldNb (NBPtr, BFWrDqDqsEarly));
+  return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnprotoor.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnprotoor.c
new file mode 100644
index 0000000000..65addd5da0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnprotoor.c
@@ -0,0 +1,99 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnprotoor.c
+ *
+ * Northbridge support functions for Errata and early samples
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/OR)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "Filecode.h"
+#include "cpuRegisters.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_OR_MNPROTOOR_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+MemNInitEarlySampleSupportOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function initializes early sample support for Orochi
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNInitEarlySampleSupportOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if ((NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F15_OR_Ax) != 0) {
+    NBPtr->IsSupported[PchgPDMode] = FALSE;         // Erratum 506
+    NBPtr->IsSupported[ChannelPDMode] = TRUE;       // Erratum 506
+    NBPtr->NBRegTable[BFReserved00C] = 0; // Erratum 473
+  }
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnregor.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnregor.c
new file mode 100644
index 0000000000..7ba37f6e26
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mnregor.c
@@ -0,0 +1,922 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnregor.c
+ *
+ * Common Northbridge register related functions for Orochi
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/OR)
+ * @e \$Revision: 58126 $ @e \$Date: 2011-08-21 23:38:29 -0600 (Sun, 21 Aug 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnor.h"
+#include "merrhdl.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_OR_MNREGOR_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define PHY_DIRECT_ADDRESS_MASK   0x0D000000
+
+STATIC CONST UINT8 InstancesPerTypeOR[8] = {9, 3, 1, 0, 2, 0, 1, 1};
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemNIsIdSupportedOr
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ *     @return          TRUE -  This node is a Orochi.
+ *     @return          FALSE - This node is not a Orochi.
+ *
+ */
+BOOLEAN
+MemNIsIdSupportedOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+  if (((LogicalIdPtr->Family & AMD_FAMILY_15_OR) != 0)
+      && ((LogicalIdPtr->Revision & AMD_F15_ALL) != 0)) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *      This function calculates the memory channel index relative to the
+ *      socket, taking the Die number, the Dct, and the channel.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Dct
+ *     @param[in] Channel
+ *
+ */
+UINT8
+MemNGetSocketRelativeChannelOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct,
+  IN       UINT8 Channel
+  )
+{
+  return ((NBPtr->MCTPtr->DieId * MAX_DCTS_PER_NODE_OR) + Dct);
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Bit Field to be programmed
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+MemNCmnGetSetFieldOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  TSEFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT8 IsLinked;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+  UINT8  IsPhyDirectAccess;
+  UINT8  IsWholeRegAccess;
+  UINT8  NumOfInstances;
+  UINT8  Instance;
+
+  Value = 0;
+  if ((FieldName < BFEndOfList) && (FieldName >= 0)) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = (UINT8) TSEFO_TYPE (Address);
+      IsLinked = (UINT8) TSEFO_LINKED (Address);
+      IsPhyDirectAccess = (UINT8) TSEFO_DIRECT_EN (Address);
+      IsWholeRegAccess = (UINT8) TSEFO_WHOLE_REG_ACCESS (Address);
+
+      ASSERT ((Address & ((UINT32) 1) << 29) == 0);   // Old Phy direct access method is not supported
+
+      Address = TSEFO_OFFSET (Address);
+
+      // By default, a bit field has only one instance
+      NumOfInstances = 1;
+
+      if ((Type == DCT_PHY_ACCESS) && IsPhyDirectAccess) {
+        Address |= PHY_DIRECT_ADDRESS_MASK;
+        if (IsWholeRegAccess) {
+          // In the case of whole regiter access (bit 0 to 15),
+          // HW broadcast and nibble mask will be used.
+          Address |= Lowbit << 16;
+          Lowbit = 0;
+          Highbit = 15;
+        } else {
+          // In the case only some bits on a register is accessed,
+          // BIOS will do read-mod-write to all chiplets manually.
+          // And nibble mask will be 1111b always.
+          Address |= 0x000F0000;
+          Field >>= Lowbit;
+          if ((Address & 0x0F00) == 0x0F00) {
+            // Broadcast mode
+            // Find out how many instances to write to
+            NumOfInstances = InstancesPerTypeOR[(Address >> 13) & 0x7];
+            if (!IsSet) {
+              // For read, only read from instance 0 in broadcast mode
+              NumOfInstances = 1;
+            }
+          }
+        }
+      }
+
+      ASSERT (NumOfInstances > 0);
+
+      for (Instance = 0; Instance < NumOfInstances; Instance++) {
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+          PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+          PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+          Address = PciAddr.AddressValue;
+          LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+          if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) && (FieldName != BFDctCfgSel)) {
+            IDS_HDT_CONSOLE (MEM_GETREG, "~Dev%x Dct%d Fn%d_%03x = %x\n",
+                             NBPtr->PciAddr.Address.Device, NBPtr->Dct,
+                             (Address >> 12) & 0xF, Address & 0xFFF, Value);
+          }
+        } else if (Type == DCT_PHY_ACCESS) {
+          if (IsPhyDirectAccess && (NumOfInstances > 1)) {
+            Address = (Address & 0x0FFFF0FF) | (((UINT32) Instance) << 8);
+          }
+          MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+          Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+          IDS_HDT_CONSOLE (MEM_GETREG, "~Dev%x Dct%d Fn2_9C_%x = %x\n", NBPtr->PciAddr.Address.Device, NBPtr->Dct, Address & 0x0FFFFFFF, Value);
+        } else if (Type == DCT_EXTRA) {
+          MemNSetBitFieldNb (NBPtr, BFDctExtraOffsetReg, Address);
+          // @attention: DctExtraAccessDone not implemented in Orochi
+          //MemNPollBitFieldNb (NBPtr, BFDctExtraAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+          Value = MemNGetBitFieldNb (NBPtr, BFDctExtraDataReg);
+        } else {
+          IDS_ERROR_TRAP;
+        }
+
+        if (IsSet) {
+          // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+          if ((Highbit - Lowbit) != 31) {
+            Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+          } else {
+            Mask = (UINT32)0xFFFFFFFF;
+          }
+          Value &= ~(Mask << Lowbit);
+          Value |= (Field & Mask) << Lowbit;
+
+          if (Type == NB_ACCESS) {
+            PciAddr.AddressValue = Address;
+            LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+            if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) && (FieldName != BFDctCfgSel)) {
+              IDS_HDT_CONSOLE (MEM_SETREG, "~Dev%x Dct%d Fn%d_%03x [%d:%d] = %x\n",
+                               NBPtr->PciAddr.Address.Device, NBPtr->Dct,
+                               (Address >> 12) & 0xF, Address & 0xFFF, Highbit, Lowbit, Field);
+            }
+          } else if (Type == DCT_PHY_ACCESS) {
+            MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+            Address |= DCT_ACCESS_WRITE;
+            MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+            MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+            IDS_HDT_CONSOLE (MEM_SETREG, "~Dev%x Dct%d Fn2_9C_%x [%d:%d] = %x\n",
+                             NBPtr->PciAddr.Address.Device, NBPtr->Dct,
+                             Address & 0x0FFFFFFF, Highbit, Lowbit, Field);
+          } else if (Type == DCT_EXTRA) {
+            MemNSetBitFieldNb (NBPtr, BFDctExtraDataReg, Value);
+            Address |= DCT_ACCESS_WRITE;
+            MemNSetBitFieldNb (NBPtr, BFDctExtraOffsetReg, Address);
+            // @attention: DctExtraAccessDone not implemented in Orochi
+            //MemNPollBitFieldNb (NBPtr, BFDctExtraAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+          } else {
+            IDS_ERROR_TRAP;
+          }
+          if (IsLinked) {
+            MemNCmnGetSetFieldOr (NBPtr, 1, FieldName + 1, Field >> (Highbit - Lowbit + 1));
+          }
+        } else {
+          Value = Value >> Lowbit;  // Shift
+          // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+          if ((Highbit - Lowbit) != 31) {
+            Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+          }
+          if (IsLinked) {
+            Value |= MemNCmnGetSetFieldOr (NBPtr, 0, FieldName + 1, 0) << (Highbit - Lowbit + 1);
+          }
+          // For direct phy access, shift the bit back for compatibility reason.
+          if ((Type == DCT_PHY_ACCESS) && IsPhyDirectAccess) {
+            Value <<= Lowbit;
+          }
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes bit field translation table
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   NBRegTable[]  - Pointer to the bit field data structure
+ *
+ */
+
+VOID
+MemNInitNBRegTableOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   TSEFO NBRegTable[]
+  )
+{
+  UINT16 i;
+
+  // Allocate heap for NB register table
+  if (!MemNAllocateNBRegTableNb (NBPtr, NbRegTabOR)) {
+    return;     // escape if fails
+  }
+  NBRegTable = NBPtr->NBRegTable;
+
+  for (i = 0; i < BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+  // ---------------------------------------------------------------------------
+  //
+  // FUNCTION 0
+  //
+  // ---------------------------------------------------------------------------
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31,  0, BFDevVendorIDReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  2,  0, BFNodeID);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  6,  4, BFNodeCnt);
+
+  // ---------------------------------------------------------------------------
+  //
+  // FUNCTION 1
+  //
+  // ---------------------------------------------------------------------------
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x48), 31, 0, BFDramBaseReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x4C), 31, 0, BFDramLimitReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x50), 31, 0, BFDramBaseReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x54), 31, 0, BFDramLimitReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x58), 31, 0, BFDramBaseReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x5C), 31, 0, BFDramLimitReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x60), 31, 0, BFDramBaseReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x64), 31, 0, BFDramLimitReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x68), 31, 0, BFDramBaseReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x6C), 31, 0, BFDramLimitReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x70), 31, 0, BFDramBaseReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x74), 31, 0, BFDramLimitReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x78), 31, 0, BFDramBaseReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x7C), 31, 0, BFDramLimitReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 0, BFDramHoleAddrReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x140), 7, 0, BFDramBaseHiReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x144), 7, 0, BFDramLimitHiReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x148), 7, 0, BFDramBaseHiReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x14C), 7, 0, BFDramLimitHiReg1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x150), 7, 0, BFDramBaseHiReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x154), 7, 0, BFDramLimitHiReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x158), 7, 0, BFDramBaseHiReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x15C), 7, 0, BFDramLimitHiReg3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x160), 7, 0, BFDramBaseHiReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x164), 7, 0, BFDramLimitHiReg4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x168), 7, 0, BFDramBaseHiReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x16C), 7, 0, BFDramLimitHiReg5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x170), 7, 0, BFDramBaseHiReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x174), 7, 0, BFDramLimitHiReg6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x178), 7, 0, BFDramBaseHiReg7);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x17C), 7, 0, BFDramLimitHiReg7);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 24, BFDramHoleBase);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 15,  7, BFDramHoleOffset);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0),  2,  2, BFDramHtHoleValid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0),  1,  1, BFDramMemHoistValid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0),  0,  0, BFDramHoleValid);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x10C),  5,  4, BFNbPsSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x10C),  0,  0, BFDctCfgSel);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x120), 23, 21, BFDramIntlvSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x120), 20,  0, BFDramBaseAddr);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x124), 23, 21, BFDramIntlvEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x124), 20,  0, BFDramLimitAddr);
+  // ---------------------------------------------------------------------------
+  //
+  // FUNCTION 2
+  //
+  // ---------------------------------------------------------------------------
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 1,  0, BFRankDef0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 1,  0, BFRankDef1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 1,  0, BFRankDef2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 1,  0, BFRankDef3);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31,  0, BFDramControlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 17, 17, BFAddrCmdTriEn); ///< Orochi
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 16, 16, BFReserved001);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 25, 25, BFSendAutoRefresh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 24, 24, BFReserved002);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 23, 21, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 20, 18, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 17,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 17, 13, BFMrsAddressHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFMrsLevel);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31,  0, BFDramMRSReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 23, 23, BFPchgPDModeSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 19, 19, BFSRT);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  9,  7, BFDramTerm_DDR3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  1,  0, BFBurstCtrl);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 29, 24, BFMemClkDis);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31,  0, BFDramTimingHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 17, 16, BFTref);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 27, 27, BFDisDllShutdownSR);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 25, 25, BFPendRefPaybackS3En);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 24, 24, BFStagRefEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 23, 23, BFForceAutoPchg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 20, 20, BFDynPageCloseEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 19, 19, BFDimmEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 17, 17, BFEnterSelfRef);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 15, 12, BFX4Dimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  8,  8, BFParEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  1,  1, BFExitSelfRef);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  0,  0, BFInitDram);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 27, 24, BFDcqBypassMax);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 22, 22, BFBankSwizzleMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 21, 21, BFFreqChgInProg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 20, 20, BFSlowAccessMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 19, 19, BFDcqArbBypassEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 18, 18, BFFourRankRDimm0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 17, 17, BFFourRankRDimm1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 16, 16, BFPowerDownMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 15, 15, BFPowerDownEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 13, 13, BFDisSimulRdWr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 12, 12, BFRDqsEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  7,  7, BFMemClkFreqVal);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  4,  0, BFMemClkFreq);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA0), 31,  0, BFDramConfigMiscReg); ///< Orochi Read Only
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA0), 31,  31, BFRcvParErr);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4), 14, 12, BFCmdThrottleMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4),  11,  11, BFBwCapEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4),  8,  8, BFODTSEn);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 31,  0, BFDramCtrlMiscReg2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 29,  29, BFRefChCmdMgtDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 28, 28, BFFastSelfRefEntryDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 27, 27, BFCSMux67);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 26, 26, BFCSMux45);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 25, 24, BFWrDqDqsEarly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 22, 22, BFPrtlChPDEnhEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 21, 21, BFAggrPDEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15,  8, BFCtrlWordCS);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  7,  7, BFLrDimmMrsCtrl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  6,  6, BFLrDimmErrOutMonEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  5,  5, BFSubMemclkRegDly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  4,  4, BFExtendedParityEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  3,  3, BFLrDimmEnhRefEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  2,  2, BFCSTimingMux67);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xC0),  0,  0, BFTraceModeEn);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x10C),  0,  0, BFIntLvRgnSwapEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x10C),  9,  3, BFIntLvRgnBaseAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x10C),  17, 11, BFIntLvRgnLmtAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x10C),  26, 20, BFIntLvRgnSize);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 11, BFDctSelBaseAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 10, 10, BFMemCleared);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  9,  9, BFMemClrBusy);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  8,  8, BFDramEnabled);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  7,  6, BFDctSelIntLvAddr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  5,  5, BFDctDatIntLv);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  3,  3, BFMemClrInit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  2,  2, BFDctSelIntLvEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  1,  1, BFDctSelHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  0,  0, BFDctSelHiRngEn);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 10, BFDctSelBaseOffset);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x118), 31,  0, BFMctCfgLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x118), 19, 19, BFLockDramCfg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x118), 18, 18, BFCC6SaveEn);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 31,  0, BFMctCfgHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 30, 30, BFFlushWr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 29, 29, BFFlushWrOnStpGnt);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 28, 28, BFPrefDramTrainMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 13, 13, BFPrefIoDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 11,  7, BFMctPrefReqLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  6,  2, BFMctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  1,  0, BFDctWrLimit);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 31,  0, BFExtMctCfgLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 10,  8, BFCohPrefPrbLmt);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  5,  4, BFAdapPrefNegStep);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  3,  2, BFAdapPrefPosStep);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0),  1,  0, BFAdapPrefMissRatio);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B4), 31,  0, BFExtMctCfgHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B4), 27, 27, BFFlushWrOnS3StpGnt);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x200), 29, 24, BFTras);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x200), 20, 16, BFTrp);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x200), 12,  8, BFTrcd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x200),  4,  0, BFTcl);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x204), 27, 24, BFTrtp);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x204), 21, 16, BFFourActWindow);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x204), 11,  8, BFTrrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x204),  5,  0, BFTrc);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x208), 26, 24, BFTrfc3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x208), 18, 16, BFTrfc2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x208), 10,  8, BFTrfc1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x208),  2,  0, BFTrfc0);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x20C), 11,  8, BFTwtr);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x20C),  4,  0, BFTcwl);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x210), 31, 22, BFMaxLatency);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x210), 18, 16, BFDataTxFifoWrDly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x210),  3,  0, BFRdPtrInit);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x214), 19, 16, BFTwrwrSdSc);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x214), 11,  8, BFTwrwrSdDc);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x214),  3,  0, BFTwrwrDd);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x218), 27, 24, BFTrdrdSdSc);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x218), 19, 16, BFTrdrdSdDc);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x218), 11,  8, BFTwrrd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x218),  3,  0, BFTrdrdDd);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x21C), 20, 16, BFTrwtWB);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x21C), 12,  8, BFTrwtTO);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x220), 12,  8, BFTmod);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x220),  3,  0, BFTmrd);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x224), 10,  8, BFTzqcs);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x224),  3,  0, BFTzqoper);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x228), 31, 24, BFTstag3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x228), 23, 16, BFTstag2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x228), 15,  8, BFTstag1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x228),  7,  0, BFTstag0);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x22C), 4,  0, BFTwrDDR3);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x230), 31, 0, BFPhyRODTCSLow);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x234), 31, 0, BFPhyRODTCSHigh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x238), 31, 0, BFPhyWODTCSLow);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x23C), 31, 0, BFPhyWODTCSHigh);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x240), 14, 12, BFWrOdtOnDuration);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x240), 10,  8, BFWrOdtTrnOnDly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x240),  7,  4, BFRdOdtOnDuration);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x240),  3,  0, BFRdOdtTrnOnDly);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x244),  3,  0, BFPrtlChPDDynDly);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x248),  29, 24, BFAggrPDDelay);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x248),  21, 16, BFPchgPDEnDelay);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x248),  12,  8, BFTxpdll);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x248),   3,  0, BFTxp);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x24C),  31,  0, BFDramPwrMngm1Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 12,  12, BFCmdSendInProg );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 11,  11, BFSendCmd );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 10,  10, BFTestStatus );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250),  9,   8, BFCmdTgt );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250),  7,   5, BFCmdType );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250),  4,   4, BFStopOnErr );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250),  3,   3, BFResetAllErr );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250),  2,   2, BFCmdTestEnable );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250),  13,   13, BFReserved003 );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250),  7,  3, BFReserved004 );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x254),  26,   24, BFTgtChipSelectA );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x254),  23,   21, BFTgtBankA );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x254),   9,    0, BFTgtAddressA );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x258),  26,   24, BFTgtChipSelectB );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x258),  23,   21, BFTgtBankB );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x258),   9,    0, BFTgtAddressB );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x25C),  31, 22, BFReserved008 );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x25C),  21, 12, BFReserved007 );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x25C),   7,  0, BFReserved006 );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x25C),   31,  0, BFReserved005 );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x260), 20,  0, BFCmdCount );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x264), 31,  25, BFErrDqNum );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x264), 24,  0, BFErrCnt );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x268), 17,  0, BFNibbleErrSts );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x26C), 17,  0, BFNibbleErr180Sts );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x270), 18,   0, BFDataPrbsSeed );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x274), 31,   0, BFDramDqMaskLow );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x278), 31,   0, BFDramDqMaskHigh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x27C),  7,   0, BFDramEccMask );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 31, 31, BFSendActCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 30, 30, BFSendPchgCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 29, 22, BFCmdChipSelect );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 21, 19, BFCmdBank );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 17,  0, BFCmdAddress );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 31,  0, BFDramCommand2 );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x290), 26,  24, BFErrBeatNum );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x290), 20,   0, BFErrCmdNum );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x294), 31,  0, BFDQErrLow );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x298), 31,  0, BFDQErrHigh );
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x29C), 7,  0, BFEccErr );
+
+  // ---------------------------------------------------------------------------
+  //
+  // DCT PHY REGISTERS
+  //
+  // ---------------------------------------------------------------------------
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00,  2,  0, BFCkeDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00,  6,  4, BFCsOdtDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 10,  8, BFAddrCmdDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 14, 12, BFClkDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 18, 16, BFDataDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 22, 20, BFDqsDrvStren);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 31,  0, BFDramPhyCtlReg);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 13, 13, BFDqsRcvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  7,  6, BFFenceTrSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  3,  3, BFPhyFenceTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  2,  2, BFTrNibbleSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0B, 31,  0, BFDramPhyStatusReg);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 20, 16, BFPhyFence);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 13, 12, BFCKETri);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C, 11,  8, BFODTTri);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0C,  7,  0, BFChipSelTri);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D, 31,  0, BFDRAMPhyDLLControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D, 25, 24, BFRxDLLWakeupTime);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D, 22, 20, BFRxCPUpdPeriod);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D, 19, 16, BFRxMaxDurDllNoLock);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D,  9,  8, BFTxDLLWakeupTime);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D,  6,  4, BFTxCPUpdPeriod);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D,  3,  0, BFTxMaxDurDllNoLock);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x50, 31,  0, BFRstRcvFifo);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x53,  8,  0, BFWrtLvErr);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F13, 14, 14, BFProcOdtAdv);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F13,  7,  0, BFPhy0x0D0F0F13);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0830,  4,  4, BFEccDLLPwrDnConf);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE013, 15,  0, BFPllRegWaitTime);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE006, 15,  0, BFPllLockTime);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F04, 13, 13, BFTriDM);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F0F, 14, 12, BFAlwaysEnDllClks);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F02, 15,  0, BFDataByteTxPreDriverCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F06, 11,  0, BFDataByteTxPreDriverCal2Pad1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F0A, 11,  0, BFDataByteTxPreDriverCal2Pad2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8006, 11,  0, BFCmdAddr0TxPreDriverCal2Pad1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F800A, 11,  0, BFCmdAddr0TxPreDriverCal2Pad2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8106, 11,  0, BFCmdAddr1TxPreDriverCal2Pad1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F810A, 11,  0, BFCmdAddr1TxPreDriverCal2Pad2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC006, 11,  0, BFAddrTxPreDriverCal2Pad1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC00A, 11,  0, BFAddrTxPreDriverCal2Pad2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC00E, 11,  0, BFAddrTxPreDriverCal2Pad3);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC012, 11,  0, BFAddrTxPreDriverCal2Pad4);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8002, 15,  15, BFCmdAddr0TxPreDriverCalPad0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8102, 15,  15, BFCmdAddr1TxPreDriverCalPad0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC002, 15,  15, BFAddrTxPreDriverCalPad0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2002, 15,  15, BFClock0TxPreDriverCalPad0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2102, 15,  15, BFClock1TxPreDriverCalPad0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2202, 15,  15, BFClock2TxPreDriverCalPad0);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F812F, 7,  0, BFAddrCmdTri);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F10, 12, 12, BFEnRxPadStandby);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE003, 14, 13, BFDisablePredriverCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE00A,  4,  4, BFSkewMemClk);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2030,  4,  4, BFPhyClkConfig0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2130,  4,  4, BFPhyClkConfig1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2230,  4,  4, BFPhyClkConfig2);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC000,  8,  8, BFReserved00C);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F1F,  4,  3, BFDataRxVioLvl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2F1F,  4,  3, BFClkRxVioLvl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4009,  3,  2, BFCsrComparator);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4009, 15, 14, BFCmpVioLvl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8F1F,  4,  3, BFCmdRxVioLvl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC01F,  4,  3, BFAddrRxVioLvl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F31, 14,  0, BFDataFence2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2F31,  4,  0, BFClkFence2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8F31,  4,  0, BFCmdFence2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC031,  4,  0, BFAddrFence2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F30,  8,  8, BFBlockRxDqsLock);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F04, 13, 13, BFDataByteDMConf);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4007, 1, 0, BFReserved8_0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4007, 6, 2, BFReserved8_1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0020, 4, 0, BFReserved4_0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0020, 12, 8, BFReserved4_1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0120, 4, 0, BFReserved4_2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0120, 12, 8, BFReserved4_3);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0220, 4, 0, BFReserved4_4);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0220, 12, 8, BFReserved4_5);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0320, 4, 0, BFReserved4_6);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0320, 12, 8, BFReserved4_7);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0420, 4, 0, BFReserved4_8);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0420, 12, 8, BFReserved4_9);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0520, 4, 0, BFReserved4_A);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0520, 12, 8, BFReserved4_B);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0620,  4, 0, BFReserved4_C);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0620, 12, 8, BFReserved4_D);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0720, 4, 0, BFReserved4_E);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0720, 12, 8, BFReserved4_F);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0820, 4, 0, BFReserved4_10);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0820, 12, 8, BFReserved4_11);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F20, 15, 0, BFReserved4_12);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0021, 4, 0, BFReserved5_0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0021, 12, 8, BFReserved5_1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0121, 4, 0, BFReserved5_2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0121, 12, 8, BFReserved5_3);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0221, 4, 0, BFReserved5_4);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0221, 12, 8, BFReserved5_5);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0321, 4, 0, BFReserved5_6);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0321, 12, 8, BFReserved5_7);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0421, 4, 0, BFReserved5_8);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0421, 12, 8, BFReserved5_9);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0521, 4, 0, BFReserved5_A);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0521, 12, 8, BFReserved5_B);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0621, 4, 0, BFReserved5_C);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0621, 12, 8, BFReserved5_D);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0721, 4, 0, BFReserved5_E);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0721, 12, 8, BFReserved5_F);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0821, 4, 0, BFReserved5_10);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0821, 12, 8, BFReserved5_11);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F21, 15, 0, BFReserved5_12);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0022, 4, 0, BFReserved6_0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0022, 12, 8, BFReserved6_1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0122, 4, 0, BFReserved6_2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0122, 12, 8, BFReserved6_3);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0222, 4, 0, BFReserved6_4);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0222, 12, 8, BFReserved6_5);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0322, 4, 0, BFReserved6_6);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0322, 12, 8, BFReserved6_7);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0422, 4, 0, BFReserved6_8);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0422, 12, 8, BFReserved6_9);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0522, 4, 0, BFReserved6_A);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0522, 12, 8, BFReserved6_B);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0622, 4, 0, BFReserved6_C);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0622, 12, 8, BFReserved6_D);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0722, 4, 0, BFReserved6_E);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0722, 12, 8, BFReserved6_F);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0822, 4, 0, BFReserved6_10);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0822, 12, 8, BFReserved6_11);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F22, 15, 0, BFReserved6_12);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0023, 4, 0, BFReserved7_0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0023, 12, 8, BFReserved7_1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0123, 4, 0, BFReserved7_2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0123, 12, 8, BFReserved7_3);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0223, 4, 0, BFReserved7_4);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0223, 12, 8, BFReserved7_5);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0323, 4, 0, BFReserved7_6);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0323, 12, 8, BFReserved7_7);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0423, 4, 0, BFReserved7_8);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0423, 12, 8, BFReserved7_9);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0523, 4, 0, BFReserved7_A);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0523, 12, 8, BFReserved7_B);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0623, 4, 0, BFReserved7_C);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0623, 12, 8, BFReserved7_D);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0723, 4, 0, BFReserved7_E);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0723, 12, 8, BFReserved7_F);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0823, 4, 0, BFReserved7_10);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0823, 12, 8, BFReserved7_11);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F23, 15, 0, BFReserved7_12);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F3E, 0, 0, BFReserved00A);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4010, 31, 0, BFReserved009);
+
+  // ---------------------------------------------------------------------------
+  //
+  // FUNCTION 3
+  //
+  // ---------------------------------------------------------------------------
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x40), 31,  0, BFMcaNbCtlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44), 22, 22, BFDramEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44),  2,  2, BFSyncOnUcEccEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x180), 25, 25, BFEccSymbolSize);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x48), 31,  0, BFMcaNbStatusLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x4C), 31,  0, BFMcaNbStatusHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58),  4,  0, BFDramScrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 28, 24, BFL3Scrub);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 29, 29, BFMultiNodeCpu);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C),  0,  0, BFScrubReDirEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C), 31,  0, BFScrubAddrLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x60), 31,  0, BFScrubAddrHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x8C),  4,  4, BFDisDatMsk);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xB0), 31,  0, BFOnLineSpareControl);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4), 13, 13, BFMTC1eEn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xE8), 25, 25, BFL3Capable);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x188), 8,  8, BFReserved00B);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x1B8), 4,  4, BFL3ScrbRedirDis);
+
+  // ---------------------------------------------------------------------------
+  //
+  // FUNCTION 4
+  //
+  // ---------------------------------------------------------------------------
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (4, 0x128), 17, 12, BFCoreStateSaveDestNode);
+
+  // ---------------------------------------------------------------------------
+  //
+  // FUNCTION 5
+  //
+  // ---------------------------------------------------------------------------
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x84),  20, 16, BFDdrMaxRate);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170), 31,  0, BFNbPstateCtlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170), 14, 14, BFSwNbPstateLoDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170),  7,  6, BFNbPstateHi);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170),  4,  3, BFNbPstateLo);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170),  1,  0, BFNbPstateMaxVal);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x174), 20, 19, BFCurNbPstate);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x174),  0,  0, BFNbPstateDis);  ///< Orochi Read Only
+
+  IDS_OPTION_HOOK (IDS_INIT_MEM_REG_TABLE, NBPtr, &NBPtr->MemPtr->StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mns3or.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mns3or.c
new file mode 100644
index 0000000000..ee6b714aaa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/OR/mns3or.c
@@ -0,0 +1,1257 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mns3or.c
+ *
+ * OR memory specific function to support S3 resume
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/OR)
+ * @e \$Revision: 59560 $ @e \$Date: 2011-09-26 11:43:44 -0600 (Mon, 26 Sep 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "mnor.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "F15PackageType.h"
+#include "mnS3or.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_OR_MNS3OR_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemS3ResumeConstructNBBlockOr (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+UINT16
+STATIC
+MemNS3GetRegLstPtrOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  );
+
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstOr (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  );
+
+VOID
+STATIC
+MemNS3SetDfltPllLockTimeOr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3SetDynModeChangeOr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3SaveMR0Or (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3RestoreMR0SetPPDOr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+STATIC
+MemNS3GetCSROr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+STATIC
+MemNS3SetCSROr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+PCI_SPECIAL_CASE PciSpecialCaseFuncOr[] = {
+  {MemNS3GetCSROr, MemNS3SetCSROr},
+  {MemNS3GetBitFieldNb, MemNS3SetBitFieldNb},
+  {MemNS3GetNBPStateDepRegUnb, MemNS3SetNBPStateDepRegUnb},
+  { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3SetDfltPllLockTimeOr},
+  { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3SetDisAutoCompUnb},
+  { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3SetDynModeChangeOr},
+  { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3DisableChannelNb},
+  {MemNS3SaveNBRegiserUnb, MemNS3RestoreNBRegiserUnb},
+  {MemNS3GetBitFieldNb, MemNS3SetPreDriverCalUnb},
+  { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3SetMemClkFreqValUnb},
+  {MemNS3SaveMR0Or, MemNS3RestoreMR0SetPPDOr}
+};
+
+PCI_REG_DESCRIPTOR ROMDATA S3PciPreSelfRefDescriptorOr[] = {
+  {{0, 0, 0}, FUNC_2, 0x110, 0xFFFFF8E7},
+  {{0, 0, 0}, FUNC_1, 0x40,  0xFFFF0703},
+  {{0, 0, 0}, FUNC_1, 0x48,  0xFFFF0703},
+  {{0, 0, 0}, FUNC_1, 0x50,  0xFFFF0703},
+  {{0, 0, 0}, FUNC_1, 0x58,  0xFFFF0703},
+  {{0, 0, 0}, FUNC_1, 0x60,  0xFFFF0703},
+  {{0, 0, 0}, FUNC_1, 0x68,  0xFFFF0703},
+  {{0, 0, 0}, FUNC_1, 0x70,  0xFFFF0703},
+  {{0, 0, 0}, FUNC_1, 0x78,  0xFFFF0703},
+  {{0, 1, 0}, FUNC_1, 0x140, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x148, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x150, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x158, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x160, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x168, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x170, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x178, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0x44,  0xFFFF0707},
+  {{0, 0, 0}, FUNC_1, 0x4C,  0xFFFF0707},
+  {{0, 0, 0}, FUNC_1, 0x54,  0xFFFF0707},
+  {{0, 0, 0}, FUNC_1, 0x5C,  0xFFFF0707},
+  {{0, 0, 0}, FUNC_1, 0x64,  0xFFFF0707},
+  {{0, 0, 0}, FUNC_1, 0x6C,  0xFFFF0707},
+  {{0, 0, 0}, FUNC_1, 0x74,  0xFFFF0707},
+  {{0, 0, 0}, FUNC_1, 0x7C,  0xFFFF0707},
+  {{0, 1, 0}, FUNC_1, 0x144, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x14C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x154, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x15C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x164, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x16C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x174, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x17C, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0xF0,  0xFF00FF87},
+  {{0, 0, 0}, FUNC_1, 0x120, 0x00FFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x124, 0x00FFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x10C, 0x07F3FBF9},
+  {{0, 0, 0}, FUNC_2, 0x114, 0xFFFFFC00},
+  {{0, 0, 0}, FUNC_2, 0x118, 0xF773FFFF},
+  {{0, 0, 0}, FUNC_2, 0x11C, 0xAFFFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x1B0, 0xFFD3FF3F},
+  {{0, 2, 0}, FUNC_2, 0x1B4, 0x000003FF}
+};
+
+CONST PCI_REGISTER_BLOCK_HEADER ROMDATA S3PciPreSelfRefOr = {
+  0,
+  (sizeof (S3PciPreSelfRefDescriptorOr) / sizeof (PCI_REG_DESCRIPTOR)),
+  S3PciPreSelfRefDescriptorOr,
+  NULL
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPreSelfDescriptorOr[] = {
+   // DCT 0
+  {{7, 0, 1}, DCT0,   0x40,  0x7FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x44,  0x7FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x48,  0x7FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x4C,  0x7FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x50,  0x7FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x54,  0x7FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x58,  0x7FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x5C,  0x7FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x60,  0x7FF83FE3, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x64,  0x7FF83FE3, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x68,  0x7FF83FE3, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x6C,  0x7FF83FE3, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x78,  0x00020000, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 2, 1}, DCT0,   0x80,  0x0000FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x84,  0x00800003, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x88,  0x3F000000, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x8C,  0x00070000, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x90,  0x0BFDF100, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0xA4,  0x00F07900, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0xA8,  0x3F60FFBC, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x200, 0x3F1F1F1F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x204, 0x0F3F0F3F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x208, 0x07070707, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 2, 1}, DCT0,   0x20C, 0x00000F1F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{2, 0, 1}, DCT0,   SET_S3_NB_PSTATE_OFFSET (0x210, 0), 0xFFCF000F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{2, 0, 1}, DCT0,   SET_S3_NB_PSTATE_OFFSET (0x210, 1), 0xFFCF000F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{2, 0, 1}, DCT0,   SET_S3_NB_PSTATE_OFFSET (0x210, 2), 0xFFCF000F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{2, 0, 1}, DCT0,   SET_S3_NB_PSTATE_OFFSET (0x210, 3), 0xFFCF000F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x214, 0x000F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x218, 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x21C, 0x001F1F00, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 2, 1}, DCT0,   0x220, 0x00001F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 2, 1}, DCT0,   0x224, 0x0000070F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x228, 0xFFFFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 1, 1}, DCT0,   0x22C, 0x0000001F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x230, 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x234, 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x238, 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x23C, 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 2, 1}, DCT0,   0x240, 0x000077FF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 1, 1}, DCT0,   0x244, 0x0000000F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x248, 0x3F3F1F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x24C, 0x3F3F3F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+
+  // DCT 1
+  {{7, 0, 1}, DCT1,   0x40,  0x7FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x44,  0x7FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x48,  0x7FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x4C,  0x7FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x50,  0x7FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x54,  0x7FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x58,  0x7FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x5C,  0x7FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x60,  0x7FF83FE3, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x64,  0x7FF83FE3, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x68,  0x7FF83FE3, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x6C,  0x7FF83FE3, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x78,  0x00020000, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 2, 1}, DCT1,   0x80,  0x0000FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x84,  0x00800003, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x88,  0x3F000000, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x8C,  0x00070000, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x90,  0x0BFDF102, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0xA8,  0x3F60FFBC, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x200, 0x3F1F1F1F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x204, 0x0F3F0F3F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x208, 0x07070707, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 2, 1}, DCT1,   0x20C, 0x00000F1F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{2, 0, 1}, DCT1,   SET_S3_NB_PSTATE_OFFSET (0x210, 0), 0xFFC7000F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{2, 0, 1}, DCT1,   SET_S3_NB_PSTATE_OFFSET (0x210, 1), 0xFFC7000F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{2, 0, 1}, DCT1,   SET_S3_NB_PSTATE_OFFSET (0x210, 2), 0xFFC7000F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{2, 0, 1}, DCT1,   SET_S3_NB_PSTATE_OFFSET (0x210, 3), 0xFFC7000F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x214, 0x000F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x218, 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x21C, 0x001F1F00, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 2, 1}, DCT1,   0x220, 0x00001F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 2, 1}, DCT1,   0x224, 0x0000070F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x228, 0xFFFFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 1, 1}, DCT1,   0x22C, 0x0000001F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x230, 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x234, 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x238, 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x23C, 0x0F0F0F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 2, 1}, DCT1,   0x240, 0x000077FF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 1, 1}, DCT1,   0x244, 0x0000000F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x248, 0x3F3F1F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x24C, 0x3F3F3F0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+
+  // DCT 0
+  // Phy Initialization
+  {{5, 3, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0B),  0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFPllRegWaitTime, 0, DCT0_MASK, ANY_DIMM_MASK},
+  // 3. Phy voltage related
+  {{1, 1, 1}, DCT0,   BFDataRxVioLvl, 0x00000018, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFClkRxVioLvl, 0x00000018, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFCmpVioLvl, 0x0000C000, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFCmdRxVioLvl, 0x00000018, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFCsrComparator, 0x0000000C, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFAddrRxVioLvl, 0x00000018, DCT0_MASK, ANY_DIMM_MASK},
+  // DCT 1
+  // Phy Initialization
+  {{5, 3, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0B), 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFPllRegWaitTime, 0, DCT1_MASK, ANY_DIMM_MASK},
+  // 3. Phy voltage related
+  {{1, 1, 1}, DCT1,   BFDataRxVioLvl, 0x00000018, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFClkRxVioLvl, 0x00000018, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFCmpVioLvl, 0x0000C000, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFCmdRxVioLvl, 0x00000018, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFAddrRxVioLvl, 0x00000018, DCT1_MASK, ANY_DIMM_MASK},
+
+  // 4. Frequency Change
+  // Check if a channel needs to be disabled
+  {{1, 1, 1}, DCT0,   BFCKETri, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{6, 3, 1}, DCT0,   0, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFCKETri, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{6, 3, 1}, DCT1,   0, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+
+  {{3, 3, 1}, DCT0,   BFPllLockTime, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{3, 3, 1}, DCT1,   BFPllLockTime, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT0,   0x94,  0x0FFFEC1F, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{7, 0, 1}, DCT1,   0x94,  0x0FFFEC1F, ANY_DIMM_MASK, ANY_DIMM_MASK},
+
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04), 0x003F3F3F, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04), 0x003F3F3F, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFProcOdtAdv, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFProcOdtAdv, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFSkewMemClk, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFSkewMemClk, 0, DCT1_MASK, ANY_DIMM_MASK},
+
+  {{9, 0, 1}, DCT0,   0x94, 0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{9, 0, 1}, DCT1,   0x94, 0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFPllLockTime, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFPllLockTime, 0, DCT1_MASK, ANY_DIMM_MASK},
+
+  // DCT 0
+  // 5. Phy Fence
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C), 0x7FFF3FFF, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFDataFence2, 0x00007FFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFClkFence2, 0x0000000F, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFCmdFence2, 0x0000000F, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFAddrFence2, 0x0000000F, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),  0x70777777, DCT0_MASK, ANY_DIMM_MASK},
+
+  // 6. Phy Compensation Init
+  {{4, 3, 1}, DCT0,   BFDisablePredriverCal, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFDataByteTxPreDriverCal2Pad1, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFDataByteTxPreDriverCal2Pad2, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT0,   BFDataByteTxPreDriverCal, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFCmdAddr0TxPreDriverCal2Pad1, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFCmdAddr0TxPreDriverCal2Pad2, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFCmdAddr1TxPreDriverCal2Pad1, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFCmdAddr1TxPreDriverCal2Pad2, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFAddrTxPreDriverCal2Pad1, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFAddrTxPreDriverCal2Pad2, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFAddrTxPreDriverCal2Pad3, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFAddrTxPreDriverCal2Pad4, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT0,   BFCmdAddr0TxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT0,   BFCmdAddr1TxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT0,   BFAddrTxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT0,   BFClock0TxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT0,   BFClock1TxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT0,   BFClock2TxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+  // DCT 1
+  // 5. Phy Fence
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C), 0x7FFF0FFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFDataFence2, 0x00007FFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFClkFence2, 0x0000000F, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFCmdFence2, 0x0000000F, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFAddrFence2, 0x0000000F, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00),  0x70777777, DCT1_MASK, ANY_DIMM_MASK},
+  // 6. Phy Compensation Init
+  {{1, 2, 1}, DCT1,   BFDataByteTxPreDriverCal2Pad1, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFDataByteTxPreDriverCal2Pad2, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT1,   BFDataByteTxPreDriverCal, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFCmdAddr0TxPreDriverCal2Pad1, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFCmdAddr0TxPreDriverCal2Pad2, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFCmdAddr1TxPreDriverCal2Pad1, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFCmdAddr1TxPreDriverCal2Pad2, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFAddrTxPreDriverCal2Pad1, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFAddrTxPreDriverCal2Pad2, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFAddrTxPreDriverCal2Pad3, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFAddrTxPreDriverCal2Pad4, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT1,   BFCmdAddr0TxPreDriverCalPad0, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT1,   BFCmdAddr1TxPreDriverCalPad0, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT1,   BFAddrTxPreDriverCalPad0, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT1,   BFClock0TxPreDriverCalPad0, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT1,   BFClock1TxPreDriverCalPad0, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{8, 2, 1}, DCT1,   BFClock2TxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+
+  {{1, 2, 1}, DCT0,   BFDisablePredriverCal, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK}
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPreSelfRefOr = {
+  0,
+  (sizeof (S3CPciPreSelfDescriptorOr) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPreSelfDescriptorOr,
+  PciSpecialCaseFuncOr
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPostSelfDescriptorOr[] = {
+  // DCT0 MR0 value and CS Enable map
+  {{10, 0, 1}, DCT0, 0,  0, DCT0_MASK, ANY_DIMM_MASK},
+  // DCT1 MR0 value and CS Enable map
+  {{10, 0, 1}, DCT1, 0,  0, DCT1_MASK, ANY_DIMM_MASK},
+  // DCT0
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x10),  0x03FF03FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x11),  0x03FF03FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x12),  0x03FF03FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x13),  0x03FF03FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x14),  0x03FF03FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x15),  0x03FF03FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x16),  0x03FF03FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x17),  0x03FF03FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x18),  0x03FF03FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x19),  0x03FF03FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1A),  0x03FF03FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1B),  0x03FF03FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x20),  0x03FF03FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x21),  0x03FF03FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x23),  0x03FF03FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x24),  0x03FF03FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x26),  0x03FF03FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x27),  0x03FF03FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x29),  0x03FF03FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x2A),  0x03FF03FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x01),  0xFFFFFFFF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x02),  0xFFFFFFFF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x03),  0xFFFFFFFF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x101), 0xFFFFFFFF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x102), 0xFFFFFFFF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x103), 0xFFFFFFFF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x201), 0xFFFFFFFF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x202), 0xFFFFFFFF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x203), 0xFFFFFFFF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x301), 0xFFFFFFFF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x302), 0xFFFFFFFF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x303), 0xFFFFFFFF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x05),  0x3E3E3E3E, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x06),  0x3E3E3E3E, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x07),  0x3E3E3E3E, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x105), 0x3E3E3E3E, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x106), 0x3E3E3E3E, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x107), 0x3E3E3E3E, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x205), 0x3E3E3E3E, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x206), 0x3E3E3E3E, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x207), 0x3E3E3E3E, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x305), 0x3E3E3E3E, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x306), 0x3E3E3E3E, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x307), 0x3E3E3E3E, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x30),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x31),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x32),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x33),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x34),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x35),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x36),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x37),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x38),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x39),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3B),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x40),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x41),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x43),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x44),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x46),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x47),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x49),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x4A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0D),  0x037F037F, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFPhyClkConfig0, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFPhyClkConfig1, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFPhyClkConfig2, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFPhyClkConfig3, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFPhy0x0D0F0F13, 0x00000083, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFAddrCmdTri, 0x0000000A1, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFReserved00C, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFEnRxPadStandby, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFEccDLLPwrDnConf, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT0,   BFTriDM, 0, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFDisDllShutdownSR, 0x00000001, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFReserved4_0,  0x0000001F, DCT0_MASK, 0x01},
+  {{1, 2, 1}, DCT0,   BFReserved4_1,  0x00001F00, DCT0_MASK, 0x01},
+  {{1, 1, 1}, DCT0,   BFReserved4_2,  0x0000001F, DCT0_MASK, 0x01},
+  {{1, 2, 1}, DCT0,   BFReserved4_3,  0x00001F00, DCT0_MASK, 0x01},
+  {{1, 1, 1}, DCT0,   BFReserved4_4,  0x0000001F, DCT0_MASK, 0x01},
+  {{1, 2, 1}, DCT0,   BFReserved4_5,  0x00001F00, DCT0_MASK, 0x01},
+  {{1, 1, 1}, DCT0,   BFReserved4_6,  0x0000001F, DCT0_MASK, 0x01},
+  {{1, 2, 1}, DCT0,   BFReserved4_7,  0x00001F00, DCT0_MASK, 0x01},
+  {{1, 1, 1}, DCT0,   BFReserved4_8,  0x0000001F, DCT0_MASK, 0x01},
+  {{1, 2, 1}, DCT0,   BFReserved4_9,  0x00001F00, DCT0_MASK, 0x01},
+  {{1, 1, 1}, DCT0,   BFReserved4_A,  0x0000001F, DCT0_MASK, 0x01},
+  {{1, 2, 1}, DCT0,   BFReserved4_B,  0x00001F00, DCT0_MASK, 0x01},
+  {{1, 1, 1}, DCT0,   BFReserved4_C,  0x0000001F, DCT0_MASK, 0x01},
+  {{1, 2, 1}, DCT0,   BFReserved4_D,  0x00001F00, DCT0_MASK, 0x01},
+  {{1, 1, 1}, DCT0,   BFReserved4_E,  0x0000001F, DCT0_MASK, 0x01},
+  {{1, 2, 1}, DCT0,   BFReserved4_F,  0x00001F00, DCT0_MASK, 0x01},
+  {{1, 1, 1}, DCT0,   BFReserved4_10, 0x0000001F, DCT0_MASK, 0x01},
+  {{1, 2, 1}, DCT0,   BFReserved4_11, 0x00001F00, DCT0_MASK, 0x01},
+  {{1, 1, 1}, DCT0,   BFReserved5_0,  0x0000001F, DCT0_MASK, 0x04},
+  {{1, 2, 1}, DCT0,   BFReserved5_1,  0x00001F00, DCT0_MASK, 0x04},
+  {{1, 1, 1}, DCT0,   BFReserved5_2,  0x0000001F, DCT0_MASK, 0x04},
+  {{1, 2, 1}, DCT0,   BFReserved5_3,  0x00001F00, DCT0_MASK, 0x04},
+  {{1, 1, 1}, DCT0,   BFReserved5_4,  0x0000001F, DCT0_MASK, 0x04},
+  {{1, 2, 1}, DCT0,   BFReserved5_5,  0x00001F00, DCT0_MASK, 0x04},
+  {{1, 1, 1}, DCT0,   BFReserved5_6,  0x0000001F, DCT0_MASK, 0x04},
+  {{1, 2, 1}, DCT0,   BFReserved5_7,  0x00001F00, DCT0_MASK, 0x04},
+  {{1, 1, 1}, DCT0,   BFReserved5_8,  0x0000001F, DCT0_MASK, 0x04},
+  {{1, 2, 1}, DCT0,   BFReserved5_9,  0x00001F00, DCT0_MASK, 0x04},
+  {{1, 1, 1}, DCT0,   BFReserved5_A,  0x0000001F, DCT0_MASK, 0x04},
+  {{1, 2, 1}, DCT0,   BFReserved5_B,  0x00001F00, DCT0_MASK, 0x04},
+  {{1, 1, 1}, DCT0,   BFReserved5_C,  0x0000001F, DCT0_MASK, 0x04},
+  {{1, 2, 1}, DCT0,   BFReserved5_D,  0x00001F00, DCT0_MASK, 0x04},
+  {{1, 1, 1}, DCT0,   BFReserved5_E,  0x0000001F, DCT0_MASK, 0x04},
+  {{1, 2, 1}, DCT0,   BFReserved5_F,  0x00001F00, DCT0_MASK, 0x04},
+  {{1, 1, 1}, DCT0,   BFReserved5_10, 0x0000001F, DCT0_MASK, 0x04},
+  {{1, 2, 1}, DCT0,   BFReserved5_11, 0x00001F00, DCT0_MASK, 0x04},
+  {{1, 1, 1}, DCT0,   BFReserved6_0,  0x0000001F, DCT0_MASK, 0x10},
+  {{1, 2, 1}, DCT0,   BFReserved6_1,  0x00001F00, DCT0_MASK, 0x10},
+  {{1, 1, 1}, DCT0,   BFReserved6_2,  0x0000001F, DCT0_MASK, 0x10},
+  {{1, 2, 1}, DCT0,   BFReserved6_3,  0x00001F00, DCT0_MASK, 0x10},
+  {{1, 1, 1}, DCT0,   BFReserved6_4,  0x0000001F, DCT0_MASK, 0x10},
+  {{1, 2, 1}, DCT0,   BFReserved6_5,  0x00001F00, DCT0_MASK, 0x10},
+  {{1, 1, 1}, DCT0,   BFReserved6_6,  0x0000001F, DCT0_MASK, 0x10},
+  {{1, 2, 1}, DCT0,   BFReserved6_7,  0x00001F00, DCT0_MASK, 0x10},
+  {{1, 1, 1}, DCT0,   BFReserved6_8,  0x0000001F, DCT0_MASK, 0x10},
+  {{1, 2, 1}, DCT0,   BFReserved6_9,  0x00001F00, DCT0_MASK, 0x10},
+  {{1, 1, 1}, DCT0,   BFReserved6_A,  0x0000001F, DCT0_MASK, 0x10},
+  {{1, 2, 1}, DCT0,   BFReserved6_B,  0x00001F00, DCT0_MASK, 0x10},
+  {{1, 1, 1}, DCT0,   BFReserved6_C,  0x0000001F, DCT0_MASK, 0x10},
+  {{1, 2, 1}, DCT0,   BFReserved6_D,  0x00001F00, DCT0_MASK, 0x10},
+  {{1, 1, 1}, DCT0,   BFReserved6_E,  0x0000001F, DCT0_MASK, 0x10},
+  {{1, 2, 1}, DCT0,   BFReserved6_F,  0x00001F00, DCT0_MASK, 0x10},
+  {{1, 1, 1}, DCT0,   BFReserved6_10, 0x0000001F, DCT0_MASK, 0x10},
+  {{1, 2, 1}, DCT0,   BFReserved6_11, 0x00001F00, DCT0_MASK, 0x10},
+  {{1, 1, 1}, DCT0,   BFReserved7_0,  0x0000001F, DCT0_MASK, 0x40},
+  {{1, 2, 1}, DCT0,   BFReserved7_1,  0x00001F00, DCT0_MASK, 0x40},
+  {{1, 1, 1}, DCT0,   BFReserved7_2,  0x0000001F, DCT0_MASK, 0x40},
+  {{1, 2, 1}, DCT0,   BFReserved7_3,  0x00001F00, DCT0_MASK, 0x40},
+  {{1, 1, 1}, DCT0,   BFReserved7_4,  0x0000001F, DCT0_MASK, 0x40},
+  {{1, 2, 1}, DCT0,   BFReserved7_5,  0x00001F00, DCT0_MASK, 0x40},
+  {{1, 1, 1}, DCT0,   BFReserved7_6,  0x0000001F, DCT0_MASK, 0x40},
+  {{1, 2, 1}, DCT0,   BFReserved7_7,  0x00001F00, DCT0_MASK, 0x40},
+  {{1, 1, 1}, DCT0,   BFReserved7_8,  0x0000001F, DCT0_MASK, 0x40},
+  {{1, 2, 1}, DCT0,   BFReserved7_9,  0x00001F00, DCT0_MASK, 0x40},
+  {{1, 1, 1}, DCT0,   BFReserved7_A,  0x0000001F, DCT0_MASK, 0x40},
+  {{1, 1, 1}, DCT0,   BFReserved7_B,  0x00001F00, DCT0_MASK, 0x40},
+  {{1, 2, 1}, DCT0,   BFReserved7_C,  0x0000001F, DCT0_MASK, 0x40},
+  {{1, 1, 1}, DCT0,   BFReserved7_D,  0x00001F00, DCT0_MASK, 0x40},
+  {{1, 2, 1}, DCT0,   BFReserved7_E,  0x0000001F, DCT0_MASK, 0x40},
+  {{1, 1, 1}, DCT0,   BFReserved7_F,  0x00001F00, DCT0_MASK, 0x40},
+  {{1, 2, 1}, DCT0,   BFReserved7_10, 0x0000001F, DCT0_MASK, 0x40},
+  {{1, 1, 1}, DCT0,   BFReserved7_11, 0x00001F00, DCT0_MASK, 0x40},
+  {{1, 1, 1}, DCT0,   BFReserved8_0, 0x00000003, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT0,   BFReserved8_1, 0x0000007C, DCT0_MASK, ANY_DIMM_MASK},
+
+    // DCT1
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x10),  0x03FF03FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x11),  0x03FF03FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x12),  0x03FF03FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x13),  0x03FF03FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x14),  0x03FF03FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x15),  0x03FF03FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x16),  0x03FF03FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x17),  0x03FF03FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x18),  0x03FF03FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x19),  0x03FF03FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1A),  0x03FF03FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1B),  0x03FF03FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x20),  0x03FF03FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x21),  0x03FF03FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x23),  0x03FF03FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x24),  0x03FF03FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x26),  0x03FF03FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x27),  0x03FF03FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x29),  0x03FF03FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x2A),  0x03FF03FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x01),  0xFFFFFFFF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x02),  0xFFFFFFFF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x03),  0xFFFFFFFF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x101), 0xFFFFFFFF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x102), 0xFFFFFFFF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x103), 0xFFFFFFFF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x201), 0xFFFFFFFF, DCT1_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x202), 0xFFFFFFFF, DCT1_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x203), 0xFFFFFFFF, DCT1_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x301), 0xFFFFFFFF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x302), 0xFFFFFFFF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x303), 0xFFFFFFFF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x05),  0x3E3E3E3E, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x06),  0x3E3E3E3E, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x07),  0x3E3E3E3E, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x105), 0x3E3E3E3E, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x106), 0x3E3E3E3E, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x107), 0x3E3E3E3E, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x205), 0x3E3E3E3E, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x206), 0x3E3E3E3E, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x207), 0x3E3E3E3E, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x305), 0x3E3E3E3E, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x306), 0x3E3E3E3E, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x307), 0x3E3E3E3E, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x30),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x31),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x32),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x33),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x34),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x35),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x36),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x37),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x38),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x39),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3B),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x40),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x41),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x43),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x44),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x46),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x47),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x49),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x4A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0D),  0x037F037F, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFPhyClkConfig0, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFPhyClkConfig1, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFPhyClkConfig2, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFPhyClkConfig3, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFPhy0x0D0F0F13, 0x00000083, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFAddrCmdTri, 0x0000000A1, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFReserved00C, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFEnRxPadStandby, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFEccDLLPwrDnConf, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 2, 1}, DCT1,   BFTriDM, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFDisDllShutdownSR, 0, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFReserved4_0,  0x0000001F, DCT1_MASK, 0x02},
+  {{1, 2, 1}, DCT1,   BFReserved4_1,  0x00001F00, DCT1_MASK, 0x02},
+  {{1, 1, 1}, DCT1,   BFReserved4_2,  0x0000001F, DCT1_MASK, 0x02},
+  {{1, 2, 1}, DCT1,   BFReserved4_3,  0x00001F00, DCT1_MASK, 0x02},
+  {{1, 1, 1}, DCT1,   BFReserved4_4,  0x0000001F, DCT1_MASK, 0x02},
+  {{1, 2, 1}, DCT1,   BFReserved4_5,  0x00001F00, DCT1_MASK, 0x02},
+  {{1, 1, 1}, DCT1,   BFReserved4_6,  0x0000001F, DCT1_MASK, 0x02},
+  {{1, 2, 1}, DCT1,   BFReserved4_7,  0x00001F00, DCT1_MASK, 0x02},
+  {{1, 1, 1}, DCT1,   BFReserved4_8,  0x0000001F, DCT1_MASK, 0x02},
+  {{1, 2, 1}, DCT1,   BFReserved4_9,  0x00001F00, DCT1_MASK, 0x02},
+  {{1, 1, 1}, DCT1,   BFReserved4_A,  0x0000001F, DCT1_MASK, 0x02},
+  {{1, 2, 1}, DCT1,   BFReserved4_B,  0x00001F00, DCT1_MASK, 0x02},
+  {{1, 1, 1}, DCT1,   BFReserved4_C,  0x0000001F, DCT1_MASK, 0x02},
+  {{1, 2, 1}, DCT1,   BFReserved4_D,  0x00001F00, DCT1_MASK, 0x02},
+  {{1, 1, 1}, DCT1,   BFReserved4_E,  0x0000001F, DCT1_MASK, 0x02},
+  {{1, 2, 1}, DCT1,   BFReserved4_F,  0x00001F00, DCT1_MASK, 0x02},
+  {{1, 1, 1}, DCT1,   BFReserved4_10, 0x0000001F, DCT1_MASK, 0x02},
+  {{1, 2, 1}, DCT1,   BFReserved4_11, 0x00001F00, DCT1_MASK, 0x02},
+  {{1, 1, 1}, DCT1,   BFReserved5_0,  0x0000001F, DCT1_MASK, 0x08},
+  {{1, 2, 1}, DCT1,   BFReserved5_1,  0x00001F00, DCT1_MASK, 0x08},
+  {{1, 1, 1}, DCT1,   BFReserved5_2,  0x0000001F, DCT1_MASK, 0x08},
+  {{1, 2, 1}, DCT1,   BFReserved5_3,  0x00001F00, DCT1_MASK, 0x08},
+  {{1, 1, 1}, DCT1,   BFReserved5_4,  0x0000001F, DCT1_MASK, 0x08},
+  {{1, 2, 1}, DCT1,   BFReserved5_5,  0x00001F00, DCT1_MASK, 0x08},
+  {{1, 1, 1}, DCT1,   BFReserved5_6,  0x0000001F, DCT1_MASK, 0x08},
+  {{1, 2, 1}, DCT1,   BFReserved5_7,  0x00001F00, DCT1_MASK, 0x08},
+  {{1, 1, 1}, DCT1,   BFReserved5_8,  0x0000001F, DCT1_MASK, 0x08},
+  {{1, 2, 1}, DCT1,   BFReserved5_9,  0x00001F00, DCT1_MASK, 0x08},
+  {{1, 1, 1}, DCT1,   BFReserved5_A,  0x0000001F, DCT1_MASK, 0x08},
+  {{1, 2, 1}, DCT1,   BFReserved5_B,  0x00001F00, DCT1_MASK, 0x08},
+  {{1, 1, 1}, DCT1,   BFReserved5_C,  0x0000001F, DCT1_MASK, 0x08},
+  {{1, 2, 1}, DCT1,   BFReserved5_D,  0x00001F00, DCT1_MASK, 0x08},
+  {{1, 1, 1}, DCT1,   BFReserved5_E,  0x0000001F, DCT1_MASK, 0x08},
+  {{1, 2, 1}, DCT1,   BFReserved5_F,  0x00001F00, DCT1_MASK, 0x08},
+  {{1, 1, 1}, DCT1,   BFReserved5_10, 0x0000001F, DCT1_MASK, 0x08},
+  {{1, 2, 1}, DCT1,   BFReserved5_11, 0x00001F00, DCT1_MASK, 0x08},
+  {{1, 1, 1}, DCT1,   BFReserved6_0,  0x0000001F, DCT1_MASK, 0x20},
+  {{1, 2, 1}, DCT1,   BFReserved6_1,  0x00001F00, DCT1_MASK, 0x20},
+  {{1, 1, 1}, DCT1,   BFReserved6_2,  0x0000001F, DCT1_MASK, 0x20},
+  {{1, 2, 1}, DCT1,   BFReserved6_3,  0x00001F00, DCT1_MASK, 0x20},
+  {{1, 1, 1}, DCT1,   BFReserved6_4,  0x0000001F, DCT1_MASK, 0x20},
+  {{1, 2, 1}, DCT1,   BFReserved6_5,  0x00001F00, DCT1_MASK, 0x20},
+  {{1, 1, 1}, DCT1,   BFReserved6_6,  0x0000001F, DCT1_MASK, 0x20},
+  {{1, 2, 1}, DCT1,   BFReserved6_7,  0x00001F00, DCT1_MASK, 0x20},
+  {{1, 1, 1}, DCT1,   BFReserved6_8,  0x0000001F, DCT1_MASK, 0x20},
+  {{1, 2, 1}, DCT1,   BFReserved6_9,  0x00001F00, DCT1_MASK, 0x20},
+  {{1, 1, 1}, DCT1,   BFReserved6_A,  0x0000001F, DCT1_MASK, 0x20},
+  {{1, 2, 1}, DCT1,   BFReserved6_B,  0x00001F00, DCT1_MASK, 0x20},
+  {{1, 1, 1}, DCT1,   BFReserved6_C,  0x0000001F, DCT1_MASK, 0x20},
+  {{1, 2, 1}, DCT1,   BFReserved6_D,  0x00001F00, DCT1_MASK, 0x20},
+  {{1, 1, 1}, DCT1,   BFReserved6_E,  0x0000001F, DCT1_MASK, 0x20},
+  {{1, 2, 1}, DCT1,   BFReserved6_F,  0x00001F00, DCT1_MASK, 0x20},
+  {{1, 1, 1}, DCT1,   BFReserved6_10, 0x0000001F, DCT1_MASK, 0x20},
+  {{1, 2, 1}, DCT1,   BFReserved6_11, 0x00001F00, DCT1_MASK, 0x20},
+  {{1, 1, 1}, DCT1,   BFReserved7_0,  0x0000001F, DCT1_MASK, 0x80},
+  {{1, 2, 1}, DCT1,   BFReserved7_1,  0x00001F00, DCT1_MASK, 0x80},
+  {{1, 1, 1}, DCT1,   BFReserved7_2,  0x0000001F, DCT1_MASK, 0x80},
+  {{1, 2, 1}, DCT1,   BFReserved7_3,  0x00001F00, DCT1_MASK, 0x80},
+  {{1, 1, 1}, DCT1,   BFReserved7_4,  0x0000001F, DCT1_MASK, 0x80},
+  {{1, 2, 1}, DCT1,   BFReserved7_5,  0x00001F00, DCT1_MASK, 0x80},
+  {{1, 1, 1}, DCT1,   BFReserved7_6,  0x0000001F, DCT1_MASK, 0x80},
+  {{1, 2, 1}, DCT1,   BFReserved7_7,  0x00001F00, DCT1_MASK, 0x80},
+  {{1, 1, 1}, DCT1,   BFReserved7_8,  0x0000001F, DCT1_MASK, 0x80},
+  {{1, 2, 1}, DCT1,   BFReserved7_9,  0x00001F00, DCT1_MASK, 0x80},
+  {{1, 1, 1}, DCT1,   BFReserved7_A,  0x0000001F, DCT1_MASK, 0x80},
+  {{1, 1, 1}, DCT1,   BFReserved7_B,  0x00001F00, DCT1_MASK, 0x80},
+  {{1, 2, 1}, DCT1,   BFReserved7_C,  0x0000001F, DCT1_MASK, 0x80},
+  {{1, 1, 1}, DCT1,   BFReserved7_D,  0x00001F00, DCT1_MASK, 0x80},
+  {{1, 2, 1}, DCT1,   BFReserved7_E,  0x0000001F, DCT1_MASK, 0x80},
+  {{1, 1, 1}, DCT1,   BFReserved7_F,  0x00001F00, DCT1_MASK, 0x80},
+  {{1, 2, 1}, DCT1,   BFReserved7_10, 0x0000001F, DCT1_MASK, 0x80},
+  {{1, 1, 1}, DCT1,   BFReserved7_11, 0x00001F00, DCT1_MASK, 0x80},
+  {{1, 1, 1}, DCT1,   BFReserved8_0, 0x00000003, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 1, 1}, DCT1,   BFReserved8_1, 0x0000007C, DCT1_MASK, ANY_DIMM_MASK},
+
+  {{0, 0, 0}, FUNC_2, 0x1B4, 0x08000000, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x180, 0x02000000, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x58,  0x1F00001F, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x5C,  0x00000001, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x80,  0xE7E7E7E7, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x84,  0xE7E7E7E7, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x1B8, 0x00000010, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x44,  0x00400004, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_4, 0x128, 0x0003F000, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  // Release NB P-state force
+  {{0, 2, 0}, FUNC_5, 0x170, 0x00006EDB, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x118, 0x00040000, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x118, 0x00080000, ANY_DIMM_MASK, ANY_DIMM_MASK},
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPostSelfRefOr = {
+  0,
+  (sizeof (S3CPciPostSelfDescriptorOr) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPostSelfDescriptorOr,
+  PciSpecialCaseFuncOr
+};
+
+MSR_REG_DESCRIPTOR ROMDATA S3MSRPreSelfRefDescriptorOr[] = {
+  {{0, 0, 0}, 0xC0010010, 0x00000000007F0000},
+  {{0, 0, 0}, 0xC001001A, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001D, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001F, 0x0044601080000600}
+};
+
+CONST MSR_REGISTER_BLOCK_HEADER ROMDATA S3MSRPreSelfRefOr = {
+  0,
+  (sizeof (S3MSRPreSelfRefDescriptorOr) / sizeof (MSR_REG_DESCRIPTOR)),
+  S3MSRPreSelfRefDescriptorOr,
+  NULL
+};
+
+VOID *MemS3RegListOr[] = {
+  (VOID *)&S3PciPreSelfRefOr,
+  NULL,
+  (VOID *)&S3CPciPreSelfRefOr,
+  (VOID *)&S3CPciPostSelfRefOr,
+  (VOID *)&S3MSRPreSelfRefOr,
+  NULL,
+  NULL,
+  NULL
+};
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for S3 resume
+ *
+ *     @param[in,out]   *S3NBPtr   - Pointer to MEM_NB_BLOCK.
+ *     @param[in,out]   *MemPtr  - Pointer to MEM_DATA_STRUCT.
+ *     @param[in]       NodeID   - Node ID of the target node.
+ *
+ *      @return         BOOLEAN
+ *                         TRUE - This is the correct constructor for the targeted node.
+ *                         FALSE - This isn't the correct constructor for the targeted node.
+ */
+BOOLEAN
+MemS3ResumeConstructNBBlockOr (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT32  PackageType;
+  INT32 i;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = ((S3_MEM_NB_BLOCK *)S3NBPtr)->NBPtr;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedOr (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  MemNInitNBRegTableOr (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->Ganged = FALSE;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_OR;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_OR;
+
+  for (i = 0; i < EnumSize; i++) {
+    NBPtr->IsSupported[i] = FALSE;
+  }
+
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) memDefTrue;
+  }
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &MemPtr->StdHeader);
+
+  NBPtr->SwitchDCT = MemNSwitchDCTNb;
+  NBPtr->SwitchChannel = MemNSwitchChannelNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldOr;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->MemNIsIdSupportedNb = MemNIsIdSupportedOr;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3ExitSelfRefReg = (VOID (*) (MEM_NB_BLOCK *, AMD_CONFIG_PARAMS *)) memDefRet;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConPCIMask = MemNS3GetConPCIMaskUnb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConMSRMask = (VOID (*) (MEM_NB_BLOCK *, DESCRIPTOR_GROUP *)) memDefRet;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3Resume = MemNS3ResumeUNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3RestoreScrub = MemNS3RestoreScrubNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetRegLstPtr = MemNS3GetRegLstPtrOr;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetDeviceRegLst = MemNS3GetDeviceRegLstOr;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3SpecialCaseHeapSize = 0;
+  NBPtr->FamilySpecificHook[DCTSelectSwitch] = MemNS3DctCfgSelectUnb;
+
+  // AM3r2 does not support Dll shutdown
+  PackageType = LibAmdGetPackageType (&(NBPtr->MemPtr->StdHeader));
+  if (PackageType != PACKAGE_TYPE_AM3r2) {
+    NBPtr->IsSupported[SetDllShutDown] = TRUE;
+  }
+
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns the register list for each device for OR
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in, out]  *DescriptPtr - Pointer to DESCRIPTOR_GROUP
+ *     @return          UINT16 - size of the device descriptor on the target node.
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  )
+{
+  UINT8 i;
+  UINT16 Size;
+  Size = 0;
+  for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+    DescriptPtr->PCIDevice[i].Type = (UINT8) (DEV_TYPE_PCI_PRE_ESR + i);
+    DescriptPtr->PCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->PCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((PCI_REGISTER_BLOCK_HEADER *) MemS3RegListOr[PCI_LST_ESR_OR - PCI_LST_ESR_OR + i] != NULL) {
+      DescriptPtr->PCIDevice[i].RegisterListID = PCI_LST_ESR_OR + i;
+      Size += sizeof (PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CPCIDevice[i].Type = (UINT8) (DEV_TYPE_CPCI_PRE_ESR + i);
+    DescriptPtr->CPCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->CPCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CPCI_REGISTER_BLOCK_HEADER *) MemS3RegListOr[CPCI_LST_ESR_OR - PCI_LST_ESR_OR + i] != NULL) {
+      DescriptPtr->CPCIDevice[i].RegisterListID = CPCI_LST_ESR_OR + i;
+      Size += sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->MSRDevice[i].Type = (UINT8) (DEV_TYPE_MSR_PRE_ESR + i);
+    DescriptPtr->MSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((MSR_REGISTER_BLOCK_HEADER *) MemS3RegListOr[MSR_LST_ESR_OR - PCI_LST_ESR_OR + i] != NULL) {
+      DescriptPtr->MSRDevice[i].RegisterListID = MSR_LST_ESR_OR + i;
+      Size += sizeof (MSR_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CMSRDevice[i].Type = (UINT8) (DEV_TYPE_CMSR_PRE_ESR + i);
+    DescriptPtr->CMSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CMSR_REGISTER_BLOCK_HEADER *) MemS3RegListOr[CMSR_LST_ESR_OR - PCI_LST_ESR_OR + i] != NULL) {
+      DescriptPtr->CMSRDevice[i].RegisterListID = CMSR_LST_ESR_OR + i;
+      Size += sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR);
+    }
+  }
+  return Size;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function return the register list according to the register ID.
+ *
+ *     @param[in]   RegisterLstID - value of the Register list ID.
+ *     @param[out]  **RegisterHeader - pointer to the address of the register list.
+ *     @return      none
+ */
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstOr (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  )
+{
+  if (RegisterLstID >= (sizeof (MemS3RegListOr) / sizeof (VOID *))) {
+    ASSERT(FALSE); // RegisterListID exceeded size of Register list
+    return AGESA_FATAL;
+  }
+  if (MemS3RegListOr[RegisterLstID] != NULL) {
+    *RegisterHeader = MemS3RegListOr[RegisterLstID];
+    return AGESA_SUCCESS;
+  }
+  ASSERT(FALSE); // Device register list error
+  return AGESA_FATAL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function that set PllLockTime to default state.
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3SetDfltPllLockTimeOr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT16 RegValue;
+
+  RegValue = 0x190;
+  MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets bit 31 [DynModeChange] of F2x9C_xB
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3SetDynModeChangeOr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT8 Dct;
+  UINT32 RegValue;
+  UINT32 Temp;
+  UINT32 TempValue;
+
+  IDS_SKIP_HOOK (IDS_BEFORE_S3_SPECIAL, &Address, ConfigPtr) {
+    Temp = Address.Address.Register;
+    Dct = ((Temp & 0x400) == 0) ? 0 : 1;
+
+    // Switch Dct
+    Address.Address.Function = FUNC_1;
+    Address.Address.Register = 0x10C;
+    TempValue = Dct;
+    LibAmdPciWrite (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+
+    Address.Address.Function = FUNC_2;
+    Address.Address.Register = Temp;
+    RegValue = 0x80000000;
+    MemNS3SetCSRNb (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function saves the heap data of MR0 and chipsel enable map before S3
+ *   entry
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3SaveMR0Or (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  AGESA_STATUS Status;
+  LOCATE_HEAP_PTR LocateHeapStructPtr;
+  MR0_DATA_ARRAY_PTR pMR0Data;
+  UINT32 Node;
+  UINT32 Dct;
+
+  Node = Address.Address.Device - 0x18;
+  Dct = Address.Address.Function;
+
+  // Get original MR0 from heap
+  LocateHeapStructPtr.BufferHandle = AMD_MEM_S3_MR0_DATA_HANDLE;
+  LocateHeapStructPtr.BufferPtr = NULL;
+  Status = HeapLocateBuffer (&LocateHeapStructPtr, ConfigPtr);
+  ASSERT (Status == AGESA_SUCCESS);
+  pMR0Data = (MR0_DATA_ARRAY_PTR) (LocateHeapStructPtr.BufferPtr);
+  ASSERT (pMR0Data != NULL);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tSave MR0 for S3 resume\n\t\tNode: %d, Dct: %d, ChipSelEnMap: %04X, MR0: %04X\n", Node, Dct, (*pMR0Data)[Node][Dct].ChipSelEnMap, (*pMR0Data)[Node][Dct].MR0Value);
+  *(UINT32*) Value = (*pMR0Data)[Node][Dct].MR0Value;
+  *(UINT32*) Value <<= 16;
+  *(UINT32*) Value |= (*pMR0Data)[Node][Dct].ChipSelEnMap;
+}
+
+/**
+ *
+ *
+ *   This function send an MRS command to set MR0[PPD] after exit self-refresh
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3RestoreMR0SetPPDOr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT32 Node;
+  UINT32 Dct;
+  UINT16 ChipSelEnMap;
+  UINT16 MR0Value;
+  UINT32 TempValue;
+  UINT32 PowerDownMode;
+  UINT32 PchgPDModeSel;
+  UINT8 ChipSel;
+
+  Node = Address.Address.Device - 0x18;
+  Dct = Address.Address.Function;
+  ChipSelEnMap = (UINT16) ((*(UINT32*) Value) & 0xFFFF);
+  MR0Value = (UINT16) (((*(UINT32*) Value) >> 16) & 0xFFFF);
+
+  Address.Address.Register = BFPowerDownMode;
+  MemNS3GetBitFieldNb (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+  PowerDownMode = TempValue;
+
+  Address.Address.Register = BFPchgPDModeSel;
+  MemNS3GetBitFieldNb (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+  PchgPDModeSel = TempValue;
+
+  // Check if Fast exit pre-charge powerdown mode is desired
+  // D18F2x84[PowerDownMode] = 0
+  // D18F2x94[PchgPDModeSel] = 0
+  // MR0[PPD] = 1
+  if (PowerDownMode == 0 && PchgPDModeSel == 0 && (MR0Value & 0x1000) == 0x1000) {
+    for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+      if (((ChipSelEnMap >> ChipSel) & 1) != 0) {
+        // if chip select present
+        Address.Address.Register = BFMrsChipSel;
+        MemNS3SetBitFieldNb (AccessS3SaveWidth32, Address, &ChipSel, ConfigPtr);
+        // BA2=0,BA1=0,BA0=0
+        TempValue = 0;
+        Address.Address.Register = BFMrsBank;
+        MemNS3SetBitFieldNb (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+        Address.Address.Register = BFMrsAddress;
+        MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &MR0Value, ConfigPtr);
+        // Bit swapping is not needed here because hardware bit swapping does not occur for commands
+        // sent via D18F2x7C_dct[1:0][SendMrsCmd] when D18F2x7C_dct[1:0][EndDramInit] = 0
+        TempValue = 1;
+        Address.Address.Register = BFSendMrsCmd;
+        MemNS3SetBitFieldNb (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+        IDS_HDT_CONSOLE (MEM_FLOW, "\tIssue MRS Command after ESR\n\t\tNode: %d, Dct: %d, CS: %d, MR0: %08X\n", Node, Dct, ChipSel, MR0Value);
+        Address.Address.Register = BFSendMrsCmd;
+        MemNS3GetBitFieldNb (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+        while (TempValue != 0) {
+          MemNS3GetBitFieldNb (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+        }
+        WaitMicroseconds (500, ConfigPtr);
+      }
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function read the value of CSR register.
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in]  *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3GetCSROr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT32 ExtendOffset;
+  UINT32 ValueRead;
+  UINT32 TempFunc;
+  UINT32 TempValue;
+
+  ValueRead = 0;
+  ExtendOffset = Address.Address.Register;
+  TempFunc = Address.Address.Function;
+
+  // Switch Dct
+  Address.Address.Function = FUNC_1;
+  Address.Address.Register = 0x10C;
+  TempValue = 0;
+  if (ExtendOffset & 0x400) {
+    TempValue = 1;
+  }
+  LibAmdPciWrite (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+  Address.Address.Function = TempFunc;
+
+  Address.Address.Register = 0x98;
+  ExtendOffset &= 0x3FF;
+  LibAmdPciWrite (AccessS3SaveWidth32, Address, &ExtendOffset, ConfigPtr);
+  while (((ValueRead >> 31) & 1) == 0) {
+    LibAmdPciRead (AccessS3SaveWidth32, Address, &ValueRead, ConfigPtr);
+  }
+  Address.Address.Register = 0x9C;
+  LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function write to a CSR register
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3SetCSROr (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT32 ExtendOffset;
+  UINT32 ValueRead;
+  UINT32 ValueWrite;
+  UINT32 TempFunc;
+  UINT32 TempValue;
+
+  ValueRead = 0;
+  ExtendOffset = Address.Address.Register;
+  TempFunc = Address.Address.Function;
+  // Switch Dct
+  Address.Address.Function = FUNC_1;
+  Address.Address.Register = 0x10C;
+  TempValue = 0;
+  if (ExtendOffset & 0x400) {
+    TempValue = 1;
+  }
+  LibAmdPciWrite (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+
+  Address.Address.Function = TempFunc;
+  Address.Address.Register = 0x9C;
+
+  ExtendOffset &= 0x3FF;
+  ExtendOffset |= 0x40000000;
+  switch (AccessWidth) {
+  case AccessS3SaveWidth8:
+    ValueWrite = *(UINT8 *) Value;
+    break;
+  case AccessS3SaveWidth16:
+    ValueWrite = *(UINT16 *) Value;
+    break;
+  case AccessS3SaveWidth32:
+    ValueWrite = *(UINT32 *) Value;
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+  LibAmdPciWrite (AccessS3SaveWidth32, Address, &ValueWrite, ConfigPtr);
+  Address.Address.Register = 0x98;
+  LibAmdPciWrite (AccessS3SaveWidth32, Address, &ExtendOffset, ConfigPtr);
+  while (((ValueRead >> 31) & 1) == 0) {
+    LibAmdPciRead (AccessS3SaveWidth32, Address, &ValueRead, ConfigPtr);
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnPh.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnPh.c
new file mode 100644
index 0000000000..17ff526ab4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnPh.c
@@ -0,0 +1,503 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnPh.c
+ *
+ * Common Northbridge functions for Pharaoh Hound
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/PH)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnda.h"
+#include "mnPh.h"
+#include "mu.h"
+#include "S3.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_PH_MNPH_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define SPLIT_CHANNEL   (UINT32) 0x20000000
+#define CHANNEL_SELECT  (UINT32) 0x10000000
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern PSO_ENTRY DefaultPlatformMemoryConfiguration[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]        *FeatPtr  - Pointer to the MEM_FEAT_BLOCK_NB
+ *     @param[in]        *SharedPtr - Pointer to the MEM_SHARED_DATA
+ *     @param[in]        NodeID  - UINT8 indicating node ID of the NB object.
+ *
+ *     @return     Boolean indicating that this is the correct memory
+ *                 controller type for the node number that was passed in.
+ */
+
+BOOLEAN
+MemConstructNBBlockPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 SpdSocketIndex;
+  UINT8 SpdChannelIndex;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedPh (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->SharedPtr = SharedPtr;
+
+  MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->MCTPtr->NodeId = NodeID;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+  NBPtr->VarMtrrHiMsk = GetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_DA * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_DA * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                                          )
+                                        );
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    return FALSE;
+  }
+
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_DA * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_DA;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].Dct = Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_DA * sizeof (CH_DEF_STRUCT);
+  }
+  NBPtr->PSBlock = (MEM_PS_BLOCK *) AllocHeapParams.BufferPtr;
+
+  //
+  // Initialize Socket List
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    MemPtr->SocketList[MCTPtr->SocketId].ChannelPtr[Dct] = &(MCTPtr->DctData[Dct].ChData[0]);
+    MemPtr->SocketList[MCTPtr->SocketId].TimingsPtr[Dct] = &(MCTPtr->DctData[Dct].Timings);
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = Dct;
+  }
+
+  MemNInitNBDataPh (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+  FeatPtr->InitHwRxEn (NBPtr);
+
+  //
+  // Calculate SPD Offsets per channel and assign pointers to the data.  At this point, we calculate the Node-Dct-Channel
+  // centric offsets and store the pointers to the first DIMM of each channel in the Channel Definition struct for that
+  // channel.  This pointer is then used later to calculate the offsets to be used for each logical dimm once the
+  // dimm types(QR or not) are known. This is done in the Technology block constructor.
+  //
+  // Calculate the SpdSocketIndex separately from the SpdChannelIndex.
+  // This will facilitate modifications due to some processors that might
+  // map the DCT-CHANNEL differently.
+  //
+  SpdSocketIndex = GetSpdSocketIndex (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, &MemPtr->StdHeader);
+  //
+  // Traverse the Dct/Channel structures
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_DA; Channel++) {
+      //
+      // Calculate the number of Dimms on this channel using the
+      //   die/dct/channel to Socket/channel conversion.
+      //
+      SpdChannelIndex = GetSpdChannelIndex (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                            NBPtr->MCTPtr->SocketId,
+                                            MemNGetSocketRelativeChannelNb (NBPtr, Dct, Channel),
+                                            &MemPtr->StdHeader);
+      NBPtr->MCTPtr->DctData[Dct].ChData[Channel].SpdPtr = &(MemPtr->SpdDataStructure[SpdSocketIndex + SpdChannelIndex]);
+    }
+  }
+
+  MemNSwitchDCTNb (NBPtr, 0);
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes member functions and variables of NB block.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitNBDataPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  INT32 i;
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+  NBPtr->PsPtr = NBPtr->PSBlock;
+
+  InitNBRegTableDA (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  NBPtr->ChannelCount = MAX_CHANNELS_PER_DCT_DA;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DA;
+  NBPtr->Ganged = FALSE;
+  NBPtr->PosTrnPattern = POS_PATTERN_72B;
+  NBPtr->MemCleared = FALSE;
+  NBPtr->StartupSpeed = DDR800_FREQUENCY;
+  NBPtr->RcvrEnDlyLimit = 0xFF;
+  NBPtr->DefDctSelIntLvAddr = 3;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+
+  for (i = 0; i < EnumSize; i++) {
+    NBPtr->IsSupported[i] = FALSE;
+  }
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+
+  NBPtr->SetMaxLatency = MemNSetMaxLatencyNb;
+  NBPtr->getMaxLatParams = MemNGetMaxLatParamsNb;
+  NBPtr->GetSysAddr = MemNGetMCTSysAddrNb;
+  NBPtr->InitializeMCT = MemNInitializeMctDA;
+  NBPtr->FinalizeMCT = MemNFinalizeMctPh;
+  NBPtr->SendMrsCmd = MemNSendMrsCmdDA;
+  NBPtr->sendZQCmd = MemNSendZQCmdNb;
+  NBPtr->WritePattern = MemNWritePatternDA;
+  NBPtr->ReadPattern = MemNReadPatternDA;
+  NBPtr->GenHwRcvEnReads = (VOID (*) (MEM_NB_BLOCK*, UINT32)) memDefRet;
+  NBPtr->CompareTestPattern = MemNCompareTestPatternNb;
+  NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternNb;
+  NBPtr->StitchMemory = MemNStitchMemoryNb;
+  NBPtr->AutoConfig = memNAutoConfigDA;
+  NBPtr->PlatformSpec = MemNPlatformSpecNb;
+  NBPtr->InitMCT = MemNInitMCTNb;
+  NBPtr->DisableDCT = MemNDisableDCTNb;
+  NBPtr->StartupDCT = MemNStartupDCTNb;
+  NBPtr->SyncTargetSpeed = MemNSyncTargetSpeedNb;
+  NBPtr->ChangeFrequency = MemNChangeFrequencyNb;
+  NBPtr->RampUpFrequency = MemNRampUpFrequencyNb;
+  NBPtr->ChangeNbFrequency = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefFalse;
+  NBPtr->ProgramCycTimings = MemNProgramCycTimingsNb;
+  NBPtr->SyncDctsReady = MemNSyncDctsReadyNb;
+  NBPtr->HtMemMapInit = MemNHtMemMapInitNb;
+  NBPtr->SyncAddrMapToAllNodes = MemNSyncAddrMapToAllNodesNb;
+  NBPtr->CpuMemTyping = MemNCPUMemTypingNb;
+  NBPtr->BeforeDqsTraining = MemNBeforeDQSTrainingNb;
+  NBPtr->AfterDqsTraining = (VOID (*) (MEM_NB_BLOCK*)) memDefRet;
+  NBPtr->OtherTiming = MemNOtherTimingDA;
+  NBPtr->UMAMemTyping = MemNUMAMemTypingNb;
+  NBPtr->TechBlockSwitch = MemNTechBlockSwitchNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDA;
+  NBPtr->SetEccSymbolSize = (VOID (*) (MEM_NB_BLOCK*)) memDefRet;
+  NBPtr->TrainingFlow = MemNTrainingFlowNb;
+  NBPtr->MinDataEyeWidth = MemNMinDataEyeWidthNb;
+  MemNInitNBDataNb (NBPtr);
+  NBPtr->PollBitField = MemNPollBitFieldNb;
+  NBPtr->BrdcstCheck = MemNBrdcstCheckNb;
+  NBPtr->BrdcstSet = MemNBrdcstSetNb;
+  NBPtr->GetTrainDly = MemNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemNSetTrainDlyNb;
+  NBPtr->PhyFenceTraining = MemNPhyFenceTrainingNb;
+  NBPtr->GetSysAddr = MemNGetMCTSysAddrNb;
+  NBPtr->RankEnabled = MemNRankEnabledNb;
+  NBPtr->MemPPhyFenceTrainingNb = MemNTrainPhyFenceNb;
+  NBPtr->MemNPlatformSpecificFormFactorInitNb = MemNPlatformSpecificFormFactorInitPh;
+  NBPtr->MemNBeforePlatformSpecNb = MemNBeforePlatformSpecDA;
+  NBPtr->MemNcmnGetSetTrainDly = MemNcmnGetSetTrainDlyNb;
+  NBPtr->MemPNodeMemBoundaryNb = MemPNodeMemBoundaryDA;
+  NBPtr->MemNInitPhyComp = MemNInitPhyCompNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelNb;
+  NBPtr->MemNBeforeDramInitNb = MemNBeforeDramInitDA;
+  NBPtr->MemNPFenceAdjustNb = (VOID (*) (MEM_NB_BLOCK *, INT16 *)) memDefRet;
+  NBPtr->GetTrainDlyParms = MemNGetTrainDlyParmsNb;
+  NBPtr->TrainingPatternInit = MemNTrainingPatternInitNb;
+  NBPtr->TrainingPatternFinalize = MemNTrainingPatternFinalizeNb;
+  NBPtr->GetApproximateWriteDatDelay = MemNGetApproximateWriteDatDelayNb;
+  NBPtr->CSPerChannel = MemNCSPerChannelNb;
+  NBPtr->CSPerDelay = MemNCSPerDelayNb;
+  NBPtr->FlushPattern = MemNFlushPatternNb;
+  NBPtr->GetUmaSize = MemNGetUmaSizeNb;
+  NBPtr->GetMemClkFreqId = MemNGetMemClkFreqIdNb;
+  NBPtr->MemNCapSpeedBatteryLife = MemNCapSpeedBatteryLifeDA;
+  NBPtr->EnableSwapIntlvRgn = MemNEnableSwapIntlvRgnNb;
+  NBPtr->WaitXMemClks = MemNWaitXMemClksNb;
+  NBPtr->MemNGetDramTerm = MemNGetDramTermNb;
+  NBPtr->MemNGetDynDramTerm = MemNGetDynDramTermNb;
+  NBPtr->MemNGetMR0CL = MemNGetMR0CLNb;
+  NBPtr->MemNGetMR0WR = MemNGetMR0WRNb;
+  NBPtr->MemNSaveMR0 = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+  NBPtr->MemNGetMR2CWL = MemNGetMR2CWLNb;
+  NBPtr->AllocateC6Storage = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+
+  NBPtr->IsSupported[SetSpareEn] = TRUE;
+  NBPtr->IsSupported[CheckSpareEn] = TRUE;
+  NBPtr->IsSupported[SetDllShutDown] = TRUE;
+  NBPtr->IsSupported[DimmBasedOnSpeed] = TRUE;
+  NBPtr->IsSupported[CheckMaxDramRate] = TRUE;
+  NBPtr->IsSupported[Check1GAlign] = TRUE;
+  NBPtr->IsSupported[CheckMaxRdDqsDlyPtr] = TRUE;
+  NBPtr->IsSupported[CheckPhyFenceTraining] = TRUE;
+  NBPtr->IsSupported[CheckGetMCTSysAddr] = TRUE;
+  NBPtr->IsSupported[CheckFindPSDct] = TRUE;
+  NBPtr->IsSupported[CheckDllStdBy] = TRUE;
+  NBPtr->IsSupported[CheckSlewWithMarginImprv] = TRUE;
+  NBPtr->IsSupported[CheckDllSpeedUp] = TRUE;
+  NBPtr->IsSupported[CheckDllRegDis] = TRUE;
+  NBPtr->IsSupported[ForceEnMemHoleRemapping] = TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the default values in the MEM_DATA_STRUCT
+ *
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+VOID
+MemNInitDefaultsPh (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT8 Socket;
+  UINT8 Channel;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  ASSERT (MemPtr != NULL);
+  RefPtr = MemPtr->ParameterListPtr;
+
+  // Memory Map/Mgt.
+  // Mask Bottom IO with 0xF8 to force hole size to have granularity of 128MB
+  RefPtr->BottomIo = 0xE0;
+  RefPtr->UmaMode = UserOptions.CfgUmaMode;
+  RefPtr->UmaSize = UserOptions.CfgUmaSize;
+  RefPtr->MemHoleRemapping = TRUE;
+  RefPtr->LimitMemoryToBelow1Tb = UserOptions.CfgLimitMemoryToBelow1Tb;
+
+  // Dram Timing
+  RefPtr->UserTimingMode = UserOptions.CfgTimingModeSelect;
+  RefPtr->MemClockValue = UserOptions.CfgMemoryClockSelect;
+  for (Socket = 0; Socket < MAX_SOCKETS_SUPPORTED; Socket++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_SOCKET; Channel++) {
+      MemPtr->SocketList[Socket].ChannelPtr[Channel] = NULL;
+      MemPtr->SocketList[Socket].TimingsPtr[Channel] = NULL;
+    }
+  }
+
+  // Memory Clear
+  RefPtr->EnableMemClr = TRUE;
+
+  // TableBasedAlterations
+  RefPtr->TableBasedAlterations = NULL;
+
+  // Platform config table
+  RefPtr->PlatformMemoryConfiguration = DefaultPlatformMemoryConfiguration;
+
+  // Memory Restore
+  RefPtr->MemRestoreCtl = FALSE;
+  RefPtr->SaveMemContextCtl = FALSE;
+  AmdS3ParamsInitializer (&RefPtr->MemContext);
+
+  // Dram Configuration
+  RefPtr->EnableBankIntlv = UserOptions.CfgMemoryEnableBankInterleaving;
+  RefPtr->EnableNodeIntlv = UserOptions.CfgMemoryEnableNodeInterleaving;
+  RefPtr->EnableChannelIntlv = UserOptions.CfgMemoryChannelInterleaving;
+  RefPtr->EnableBankSwizzle = UserOptions.CfgBankSwizzle;
+  RefPtr->EnableParity = UserOptions.CfgMemoryParityEnable;
+  RefPtr->EnableOnLineSpareCtl = UserOptions.CfgOnlineSpare;
+
+  // Dram Power
+  RefPtr->EnablePowerDown = UserOptions.CfgMemoryPowerDown;
+
+  // ECC
+  RefPtr->EnableEccFeature = UserOptions.CfgEnableEccFeature;
+
+  // Vref
+  RefPtr->ExternalVrefCtl = UserOptions.CfgExternalVrefCtlFeature;
+
+  //Training Mode
+  RefPtr->ForceTrainMode = UserOptions.CfgForceTrainMode;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function writes training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Pattern[] - Pattern to write
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNWritePatternPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUWriteCachelines (Address, Pattern, ClCount);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function reads training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Buffer[] - Buffer to fill
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNReadPatternPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUReadCachelines (Buffer, Address, ClCount);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates DQS training for Server NB
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+memNEnableTrainSequencePh (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN Retval;
+  Retval = TRUE;
+  if (!MemNIsIdSupportedPh (NBPtr, &(NBPtr->MemPtr->DiesPerSystem[NBPtr->MCTPtr->NodeId].LogicalCpuid))) {
+    Retval = FALSE;
+  }
+  return Retval;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnPh.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnPh.h
new file mode 100644
index 0000000000..225dae41fe
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnPh.h
@@ -0,0 +1,129 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnPh.h
+ *
+ * Northbridge Ph for Pharaoh Hound
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 56033 $ @e \$Date: 2011-07-06 01:12:20 -0600 (Wed, 06 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MNPH_H_
+#define _MNPH_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemNIsIdSupportedPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+BOOLEAN
+MemConstructNBBlockPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemNInitNBDataPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitDefaultsPh (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID
+MemNWritePatternPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemNReadPatternPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+BOOLEAN
+memNEnableTrainSequencePh (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNFinalizeMctPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+#endif  /* _MNPH_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnS3Ph.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnS3Ph.c
new file mode 100644
index 0000000000..33bfd26d1d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnS3Ph.c
@@ -0,0 +1,775 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mns3Ph.c
+ *
+ * Ph memory specific function to support S3 resume
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/PH)
+ * @e \$Revision: 50673 $ @e \$Date: 2011-04-12 21:18:06 -0600 (Tue, 12 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "mnda.h"
+#include "mnPh.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mnS3Ph.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_PH_MNS3PH_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  );
+
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstPh (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  );
+
+VOID
+STATIC
+MemNS3SetSpecialPCIRegPh (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+STATIC
+MemNS3ExitSelfRefRegPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+PCI_SPECIAL_CASE PciSpecialCaseFuncPh[] = {
+  {MemNS3GetCSRNb, MemNS3SetCSRNb},
+  {MemNS3GetCSRNb, MemNS3SetSpecialPCIRegPh},
+  {MemNS3GetBitFieldNb, MemNS3SetBitFieldNb}
+};
+
+PCI_REG_DESCRIPTOR ROMDATA S3PciPreSelfRefDescriptorPh[] = {
+  {{0, 0, 0}, FUNC_2, 0x110, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x40,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x48,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x50,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x58,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x60,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x68,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x70,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x78,  0xFFFF3F03},
+  {{0, 1, 0}, FUNC_1, 0x140, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x148, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x150, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x158, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x160, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x168, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x170, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x178, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0x44,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x4C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x54,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x5C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x64,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x6C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x74,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x7C,  0xFFFF07FF},
+  {{0, 1, 0}, FUNC_1, 0x144, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x14C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x154, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x15C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x164, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x16C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x174, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x17C, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0xF0,  0xFF00FF83},
+  {{0, 0, 0}, FUNC_1, 0x120, 0x00FFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x124, 0x07FFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x10C, 0x07F3FBF9},
+  {{0, 0, 0}, FUNC_2, 0x114, 0xFFFFFC00},
+  {{0, 0, 0}, FUNC_2, 0x118, 0xF773FFFF},
+  {{0, 0, 0}, FUNC_2, 0x11C, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x1B0, 0xFFD3FF3F}
+};
+
+CONST PCI_REGISTER_BLOCK_HEADER ROMDATA S3PciPreSelfRefPh = {
+  0,
+  (sizeof (S3PciPreSelfRefDescriptorPh) / sizeof (PCI_REG_DESCRIPTOR)),
+  S3PciPreSelfRefDescriptorPh,
+  NULL
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPreSelfDescriptorPh[] = {
+   // DCT 0
+  {{0, 0, 0}, FUNC_2, 0x40,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x44,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x48,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x4C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x50,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x54,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x58,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x5C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x60,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x64,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x68,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x6C,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x78,  0xFFCDBF0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x7C,  0xFFF7FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x80,  0x0000FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x84,  0x07FFEFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x88,  0xFFFFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x8C,  0xFFFF7FFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x90,  0x00FFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0xA8,  0x0007FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),  0x30333333, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0x3FFFFFFF, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),  0x001FBFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),  0x003F3F3F, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig0, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig1, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig2, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig3, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  //errata 322
+  {{2, 2, 1}, DCT0,   BFErr322I, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFErr322II, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  //errata 263
+  {{2, 2, 1}, DCT0,   BFErr263, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  // Dll regulator disable
+  {{2, 2, 1}, DCT0,   BFPhy0x0D040F3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D042F3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D048F3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D04DF3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+
+   // DCT 1
+  {{0, 0, 0}, FUNC_2, 0x140, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x144, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x148, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x14C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x150, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x154, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x158, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x15C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x160, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x164, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x168, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x16C, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x178, 0xFFCDBF0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x17C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x180, 0x0000FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x184, 0x07FFEFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x188, 0xFFFFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x18C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x190, 0x00FFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x1A8, 0x0007FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00), 0x30333333, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C), 0x001FBFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04), 0x003F3F3F, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig0, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig1, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig2, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig3, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 322
+  {{2, 2, 1}, DCT1,   BFErr322I, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFErr322II, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 263
+  {{2, 2, 1}, DCT1,   BFErr263, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // Dll regulator disable
+  {{2, 2, 1}, DCT1,   BFPhy0x0D040F3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D042F3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D048F3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D04DF3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Restore F2x[1,0]94 right before exit self refresh
+  {{0, 0, 0}, FUNC_2, 0x94,  0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x194, 0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK}
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPreSelfRefPh = {
+  0,
+  (sizeof (S3CPciPreSelfDescriptorPh) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPreSelfDescriptorPh,
+  PciSpecialCaseFuncPh
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPostSelfDescriptorPh[] = {
+  // DCT0
+  {{2, 2, 1}, DCT0,   BFEccDLLPwrDnConf, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFEccDLLConf, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x10),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x11),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x12),  0x000001FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x13),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x14),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x15),  0x000001FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x16),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x17),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x18),  0x000001FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x19),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1B),  0x000001FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x20),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x21),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x23),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x24),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x26),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x27),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x29),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x2A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x01),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x02),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x03),  0x0000007F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x101), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x102), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x103), 0x0000007F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x201), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x202), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x203), 0x0000007F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x301), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x302), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x303), 0x0000007F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x05),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x06),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x07),  0x0000003F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x105), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x106), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x107), 0x0000003F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x205), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x206), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x207), 0x0000003F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x305), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x306), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x307), 0x0000003F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0xFFFFFFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0D),  0x23772377, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x30),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x31),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x32),  0x000000FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x33),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x34),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x35),  0x000000FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x36),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x37),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x38),  0x000000FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x39),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3B),  0x000000FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x40),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x41),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x43),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x44),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x46),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x47),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x49),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x4A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D0F0F13, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D0F0830, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D07812F, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyDLLControl, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+
+    // DCT1
+  {{2, 2, 1}, DCT1,   BFEccDLLPwrDnConf, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFEccDLLConf, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x10),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x11),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x12),  0x000001FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x13),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x14),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x15),  0x000001FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x16),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x17),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x18),  0x000001FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x19),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1B),  0x000001FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x20),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x21),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x23),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x24),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x26),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x27),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x29),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x2A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x01),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x02),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x03),  0x0000007F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x101),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x102),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x103),  0x0000007F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x201),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x202),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x203),  0x0000007F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x301),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x302),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x303),  0x0000007F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x05),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x06),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x07),  0x0000003F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x105),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x106),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x107),  0x0000003F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x205),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x206),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x207),  0x0000003F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x305),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x306),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x307),  0x0000003F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0D),  0x23772377, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x30),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x31),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x32),  0x000000FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x33),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x34),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x35),  0x000000FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x36),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x37),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x38),  0x000000FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x39),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3B),  0x000000FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x40),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x41),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x43),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x44),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x46),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x47),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x49),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x4A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D0F0F13, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D0F0830, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D07812F, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyDLLControl, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+
+  // DllShutDown
+  {{2, 2, 1}, DCT0,   BFPhyPLLLockTime, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyDLLLockTime, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT0,   BFDisDllShutdownSR, 0x00000001, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyPLLLockTime, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyDLLLockTime, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT1,   BFDisDllShutdownSR, 0x00000001, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Restore scrubber related registers after restoring training related registers
+  {{0, 0, 0}, FUNC_3, 0x44,  0xFFFFFFFE, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x58,  0x1F1F1F1F, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT0,   BFScrubReDirEn, 0x00000001, ANY_DIMM_MASK, ANY_DIMM_MASK},
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPostSelfRefPh = {
+  0,
+  (sizeof (S3CPciPostSelfDescriptorPh) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPostSelfDescriptorPh,
+  PciSpecialCaseFuncPh
+};
+
+MSR_REG_DESCRIPTOR ROMDATA S3MSRPreSelfRefDescriptorPh[] = {
+  {{0, 0, 0}, 0xC0010010, 0x00000000007F07FF},
+  {{0, 0, 0}, 0xC001001A, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001D, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001F, 0xC047F87FFF527FFF}
+};
+
+CONST MSR_REGISTER_BLOCK_HEADER ROMDATA S3MSRPreSelfRefPh = {
+  0,
+  (sizeof (S3MSRPreSelfRefDescriptorPh) / sizeof (MSR_REG_DESCRIPTOR)),
+  S3MSRPreSelfRefDescriptorPh,
+  NULL
+};
+
+VOID *MemS3RegListPh[] = {
+  (VOID *)&S3PciPreSelfRefPh,
+  NULL,
+  (VOID *)&S3CPciPreSelfRefPh,
+  (VOID *)&S3CPciPostSelfRefPh,
+  (VOID *)&S3MSRPreSelfRefPh,
+  NULL,
+  NULL,
+  NULL
+};
+
+CONST UINT16 ROMDATA SpecialCasePCIRegPh[] = {
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04)
+};
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemNIsIdSupportedPh
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ *     @return          TRUE -  This node is a PH.
+ *     @return          FALSE - This node is not a PH.
+ *
+ */
+BOOLEAN
+MemNIsIdSupportedPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+
+  if (((LogicalIdPtr->Family & AMD_FAMILY_10_PH) != 0)
+      && ((LogicalIdPtr->Revision & AMD_F10_PH_ALL) != 0)) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for S3 resume
+ *
+ *     @param[in,out]   *S3NBPtr   - Pointer to MEM_NB_BLOCK.
+ *     @param[in,out]   *MemPtr  - Pointer to MEM_DATA_STRUCT.
+ *     @param[in]       NodeID   - Node ID of the target node.
+ *
+ *      @return         BOOLEAN
+ *                         TRUE - This is the correct constructor for the targeted node.
+ *                         FALSE - This isn't the correct constructor for the targeted node.
+ */
+BOOLEAN
+MemS3ResumeConstructNBBlockPh (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  INT32 i;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = ((S3_MEM_NB_BLOCK *)S3NBPtr)->NBPtr;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedPh (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  InitNBRegTableDA (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->Ganged = FALSE;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DA;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+
+  for (i = 0; i < EnumSize; i++) {
+    NBPtr->IsSupported[i] = FALSE;
+  }
+
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) memDefTrue;
+  }
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &MemPtr->StdHeader);
+
+  NBPtr->IsSupported[CheckDllSpeedUp] = TRUE;
+  NBPtr->SwitchDCT = MemNSwitchDCTNb;
+  NBPtr->SwitchChannel = MemNSwitchChannelNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDA;
+  NBPtr->MemNIsIdSupportedNb = MemNIsIdSupportedPh;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3ExitSelfRefReg = MemNS3ExitSelfRefRegPh;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConPCIMask = MemNS3GetConPCIMaskNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConMSRMask = (VOID (*) (MEM_NB_BLOCK*, DESCRIPTOR_GROUP*)) memDefRet;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3Resume = MemNS3ResumeNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3RestoreScrub = MemNS3RestoreScrubNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetRegLstPtr = MemNS3GetRegLstPtrPh;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetDeviceRegLst = MemNS3GetDeviceRegLstPh;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3SpecialCaseHeapSize = (sizeof (SpecialCasePCIRegPh) / sizeof (UINT16)) * sizeof (UINT32);
+
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns the register list for each device for Ph
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in, out]  *DescriptPtr - Pointer to DESCRIPTOR_GROUP
+ *     @return          UINT16 - size of the device descriptor on the target node.
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  )
+{
+  UINT8 i;
+  UINT16 Size;
+  Size = 0;
+  for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+    DescriptPtr->PCIDevice[i].Type = (UINT8) (DEV_TYPE_PCI_PRE_ESR + i);
+    DescriptPtr->PCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->PCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((PCI_REGISTER_BLOCK_HEADER *) MemS3RegListPh[PCI_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->PCIDevice[i].RegisterListID = PCI_LST_ESR_DA + i;
+      Size += sizeof (PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CPCIDevice[i].Type = (UINT8) (DEV_TYPE_CPCI_PRE_ESR + i);
+    DescriptPtr->CPCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->CPCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CPCI_REGISTER_BLOCK_HEADER *) MemS3RegListPh[CPCI_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->CPCIDevice[i].RegisterListID = CPCI_LST_ESR_DA + i;
+      Size += sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->MSRDevice[i].Type = (UINT8) (DEV_TYPE_MSR_PRE_ESR + i);
+    DescriptPtr->MSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((MSR_REGISTER_BLOCK_HEADER *) MemS3RegListPh[MSR_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->MSRDevice[i].RegisterListID = MSR_LST_ESR_DA + i;
+      Size += sizeof (MSR_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CMSRDevice[i].Type = (UINT8) (DEV_TYPE_CMSR_PRE_ESR + i);
+    DescriptPtr->CMSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CMSR_REGISTER_BLOCK_HEADER *) MemS3RegListPh[CMSR_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->CMSRDevice[i].RegisterListID = CMSR_LST_ESR_DA + i;
+      Size += sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR);
+    }
+  }
+  return Size;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function return the register list according to the register ID.
+ *
+ *     @param[in]   RegisterLstID - value of the Register list ID.
+ *     @param[out]  **RegisterHeader - pointer to the address of the register list.
+ *     @return      none
+ */
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstPh (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  )
+{
+  if (RegisterLstID >= (sizeof (MemS3RegListPh) / sizeof (VOID *))) {
+    ASSERT(FALSE); // RegisterListID exceeded size of Register list
+    return AGESA_FATAL;
+  }
+  if (MemS3RegListPh[RegisterLstID] != NULL) {
+    *RegisterHeader = MemS3RegListPh[RegisterLstID];
+    return AGESA_SUCCESS;
+  }
+  ASSERT(FALSE); // Device register list error
+  return AGESA_FATAL;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in]   *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *      @return         none
+ */
+VOID
+STATIC
+MemNS3SetSpecialPCIRegPh (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (Address.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_DA; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_DA);
+    // Save the value in the heap at appropriate offset based on the index
+    // of the target register in the special case array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegPh) / sizeof (UINT16)); i ++) {
+        if (SpecialCasePCIRegPh[i] == Address.Address.Register) {
+          *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2)) = *(UINT32 *) Value;
+        }
+      }
+    }
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in,out]  *NBPtr - Pointer to the northbridge block.
+ *     @param[in,out]  *StdHeader - Config handle for library and services.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3ExitSelfRefRegPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  PCI_ADDR PciAddr;
+  UINT32 Value;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+  PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+  PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+  PciAddr.Address.Function = 2;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, StdHeader) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (PciAddr.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_DA; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_DA);
+    // Restore the value one by one in the sequence of the special case register array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegPh) / sizeof (UINT16)); i ++) {
+        PciAddr.Address.Register = SpecialCasePCIRegPh[i];
+        Value = *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2));
+        MemNS3SetCSRNb (AccessS3SaveWidth32, PciAddr, &Value, StdHeader);
+      }
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnS3Ph.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnS3Ph.h
new file mode 100644
index 0000000000..fcab777b0a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnS3Ph.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnS3Ph.h
+ *
+ * S3 resume memory related function for Ph.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/PH)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MNS3PH_H_
+#define _MNS3PH_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+/// ID for register list of PH
+typedef enum {
+  PCI_LST_ESR_DA,   ///< Assign 0x0000 for PCI register list for pre exit self refresh.
+  PCI_LST_DA,       ///< Assign 0x0001 for PCI register list for post exist self refresh.
+  CPCI_LST_ESR_DA,  ///< Assign 0x0002 for conditional PCI register list for pre exit self refresh.
+  CPCI_LST_DA,      ///< Assign 0x0003 for conditional PCI register list for post exit self refresh.
+  MSR_LST_ESR_DA,   ///< Assign 0x0004 for MSR register list for pre exit self refresh.
+  MSR_LST_DA,       ///< Assign 0x0005 for MSR register list for post exit self refresh.
+  CMSR_LST_ESR_DA,  ///< Assign 0x0006 for conditional MSR register list for pre exit self refresh.
+  CMSR_LST_DA,      ///< Assign 0x0007 for conditional MSR register list for post exit self refresh.
+} RegisterListIDDA;
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif //_MNS3PH_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnflowPh.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnflowPh.c
new file mode 100644
index 0000000000..d95e210508
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnflowPh.c
@@ -0,0 +1,141 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnflowPh.c
+ *
+ * Pharaoh Hound initializer for MCT and DCT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/PH)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mnda.h"
+#include "mnPh.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_PH_MNFLOWPH_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledPh[MAX_FF_TYPES];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function initializes the platform specific block
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - AGESA_SUCCESS at least one dorm factor was found
+ *     @return          FALSE - AGESA_UNSUPPORTED - Error indicating that no form factors were found
+ */
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 f;
+  UINT8 ErrUnSuppFFCount;
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->ChannelPtr->ChDimmValid != 0) {
+      ErrUnSuppFFCount = 0;
+      for (f = 0; f < MAX_FF_TYPES; f++) {
+        ASSERT (memPlatSpecFFInstalledPh[f] != NULL);
+        if (memPlatSpecFFInstalledPh[f] (NBPtr->MemPtr, NBPtr->ChannelPtr, NBPtr->PsPtr) == AGESA_UNSUPPORTED) {
+          ErrUnSuppFFCount++; //Count the number of AGESA_UNSUPPORTED errors
+        } else {
+          break;
+        }
+      }
+      if (ErrUnSuppFFCount == MAX_FF_TYPES) {
+        return FALSE; // No FF types are supported
+      }
+    }
+  }
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnidendimmPh.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnidendimmPh.c
new file mode 100644
index 0000000000..d6ac7d336d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnidendimmPh.c
@@ -0,0 +1,141 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnidendimmPh.c
+ *
+ * PH northbridge constructor for dimm identification translator.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/PH)
+ * @e \$Revision: 45911 $ @e \$Date: 2011-01-24 13:55:11 -0700 (Mon, 24 Jan 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnda.h"
+#include "mnPh.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_PH_MNIDENDIMMPH_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for dimm identification translator
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in,out]   NodeID   - ID of current node to construct
+ *     @return          TRUE     - This is the correct constructor for the targeted node.
+ *     @return          FALSE    - This isn't the correct constructor for the targeted node.
+ *
+ */
+
+BOOLEAN
+MemNIdentifyDimmConstructorPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedPh (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DA;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Ganged = FALSE;
+  InitNBRegTableDA (NBPtr, NBPtr->NBRegTable);
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDA;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelNb;
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnmctPh.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnmctPh.c
new file mode 100644
index 0000000000..c47e09af32
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/PH/mnmctPh.c
@@ -0,0 +1,177 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnmctPh.c
+ *
+ * Northbridge PH MCT supporting functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/PH)
+ * @e \$Revision: 51634 $ @e \$Date: 2011-04-26 17:12:52 +0800 (Tue, 26 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnda.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_PH_MNMCTPH_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets final values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNFinalizeMctPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  MEM_DATA_STRUCT *MemPtr;
+  DRAM_PREFETCH_MODE DramPrefetchMode;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+  DramPrefetchMode = MemPtr->PlatFormConfig->PlatformProfile.AdvancedPerformanceProfile.DramPrefetchMode;
+  // Recommended settings for F2x1B0
+  MemNSetBitFieldNb (NBPtr, BFAdapPrefMissRatio, 1);
+  MemNSetBitFieldNb (NBPtr, BFAdapPrefPosStep, 0);
+  MemNSetBitFieldNb (NBPtr, BFAdapPrefNegStep, 0);
+  MemNSetBitFieldNb (NBPtr, BFCohPrefPrbLmt, 1);
+  MemNSetBitFieldNb (NBPtr, BFPrefFourConf, 7);
+  MemNSetBitFieldNb (NBPtr, BFPrefFiveConf, 7);
+  if (!NBPtr->Ganged) {
+      MemNSetBitFieldNb (NBPtr, BFEnSplitDctLimits, 1);
+  }
+  // Recommended settings for F2x11C
+  MemNSetBitFieldNb (NBPtr, BFPrefThreeConf, 6);
+  MemNSetBitFieldNb (NBPtr, BFMctWrLimit, 16);
+  MemNSetBitFieldNb (NBPtr, BFPrefCpuDis, 0);
+  MemNSetBitFieldNb (NBPtr, BFPrefIoDis, 0);
+  MemNSetBitFieldNb (NBPtr, BFFlushWrOnStpGnt, 1);
+
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_IO || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefIoDis, 1);
+  }
+
+  if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_CPU || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+    MemNSetBitFieldNb (NBPtr, BFPrefCpuDis, 1);
+  }
+  // For power saving
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      if (NBPtr->ChannelPtr->Dimmx4Present == 0) {
+        MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F13, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0F13) | 0x80));
+      }
+      if (!NBPtr->MCTPtr->Status[SbEccDimms]) {
+        MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0830, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0830) | 0x10));
+      }
+      MemNSetBitFieldNb (NBPtr, BFPhy0x0D07812F, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D07812F) | 0x01));
+    }
+  }
+
+  if (NBPtr->Node == BSP_DIE) {
+    if (!NBPtr->ClToNbFlag) {
+      LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+      SMsr.lo &= ~((UINT32)1 << 15);                // ClLinesToNbDis
+      LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    }
+
+    LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+    SMsr.hi &= ~((UINT32)1 << (48 - 32));               // WbEnhWsbDis
+    LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  }
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnRb.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnRb.c
new file mode 100644
index 0000000000..cec68c1cb3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnRb.c
@@ -0,0 +1,503 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnRb.c
+ *
+ * Common Northbridge functions for Ridgeback
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/RB)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnda.h"
+#include "mnRb.h"
+#include "mu.h"
+#include "S3.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_RB_MNRB_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define SPLIT_CHANNEL   (UINT32) 0x20000000
+#define CHANNEL_SELECT  (UINT32) 0x10000000
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern PSO_ENTRY DefaultPlatformMemoryConfiguration[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]        *FeatPtr  - Pointer to the MEM_FEAT_BLOCK_NB
+ *     @param[in]        *SharedPtr - Pointer to the MEM_SHARED_DATA
+ *     @param[in]        NodeID  - UINT8 indicating node ID of the NB object.
+ *
+ *     @return     Boolean indicating that this is the correct memory
+ *                 controller type for the node number that was passed in.
+ */
+
+BOOLEAN
+MemConstructNBBlockRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 SpdSocketIndex;
+  UINT8 SpdChannelIndex;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedRb (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->SharedPtr = SharedPtr;
+
+  MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->MCTPtr->NodeId = NodeID;
+  NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+  NBPtr->VarMtrrHiMsk = GetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_DA * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_DA * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))
+                                          )
+                                        );
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    return FALSE;
+  }
+
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_DA * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_DA;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].Dct = Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_DA * sizeof (CH_DEF_STRUCT);
+  }
+  NBPtr->PSBlock = (MEM_PS_BLOCK *) AllocHeapParams.BufferPtr;
+
+  //
+  // Initialize Socket List
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    MemPtr->SocketList[MCTPtr->SocketId].ChannelPtr[Dct] = &(MCTPtr->DctData[Dct].ChData[0]);
+    MemPtr->SocketList[MCTPtr->SocketId].TimingsPtr[Dct] = &(MCTPtr->DctData[Dct].Timings);
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = Dct;
+  }
+
+  MemNInitNBDataRb (NBPtr);
+
+  FeatPtr->InitCPG (NBPtr);
+  NBPtr->FeatPtr = FeatPtr;
+  FeatPtr->InitHwRxEn (NBPtr);
+
+  //
+  // Calculate SPD Offsets per channel and assign pointers to the data.  At this point, we calculate the Node-Dct-Channel
+  // centric offsets and store the pointers to the first DIMM of each channel in the Channel Definition struct for that
+  // channel.  This pointer is then used later to calculate the offsets to be used for each logical dimm once the
+  // dimm types(QR or not) are known. This is done in the Technology block constructor.
+  //
+  // Calculate the SpdSocketIndex separately from the SpdChannelIndex.
+  // This will facilitate modifications due to some processors that might
+  // map the DCT-CHANNEL differently.
+  //
+  SpdSocketIndex = GetSpdSocketIndex (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, &MemPtr->StdHeader);
+  //
+  // Traverse the Dct/Channel structures
+  //
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_DA; Channel++) {
+      //
+      // Calculate the number of Dimms on this channel using the
+      //   die/dct/channel to Socket/channel conversion.
+      //
+      SpdChannelIndex = GetSpdChannelIndex (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                            NBPtr->MCTPtr->SocketId,
+                                            MemNGetSocketRelativeChannelNb (NBPtr, Dct, Channel),
+                                            &MemPtr->StdHeader);
+      NBPtr->MCTPtr->DctData[Dct].ChData[Channel].SpdPtr = &(MemPtr->SpdDataStructure[SpdSocketIndex + SpdChannelIndex]);
+    }
+  }
+
+  MemNSwitchDCTNb (NBPtr, 0);
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes member functions and variables of NB block.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitNBDataRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  INT32 i;
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+  NBPtr->PsPtr = NBPtr->PSBlock;
+
+  InitNBRegTableDA (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  NBPtr->ChannelCount = MAX_CHANNELS_PER_DCT_DA;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DA;
+  NBPtr->Ganged = FALSE;
+  NBPtr->PosTrnPattern = POS_PATTERN_72B;
+  NBPtr->MemCleared = FALSE;
+  NBPtr->StartupSpeed = DDR800_FREQUENCY;
+  NBPtr->RcvrEnDlyLimit = 0xFF;
+  NBPtr->DefDctSelIntLvAddr = 3;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+
+  for (i = 0; i < EnumSize; i++) {
+    NBPtr->IsSupported[i] = FALSE;
+  }
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+
+  NBPtr->SetMaxLatency = MemNSetMaxLatencyNb;
+  NBPtr->getMaxLatParams = MemNGetMaxLatParamsNb;
+  NBPtr->GetSysAddr = MemNGetMCTSysAddrNb;
+  NBPtr->InitializeMCT = MemNInitializeMctDA;
+  NBPtr->FinalizeMCT = MemNFinalizeMctDA;
+  NBPtr->SendMrsCmd = MemNSendMrsCmdDA;
+  NBPtr->sendZQCmd = MemNSendZQCmdNb;
+  NBPtr->WritePattern = MemNWritePatternDA;
+  NBPtr->ReadPattern = MemNReadPatternDA;
+  NBPtr->GenHwRcvEnReads = (VOID (*) (MEM_NB_BLOCK*, UINT32)) memDefRet;
+  NBPtr->CompareTestPattern = MemNCompareTestPatternNb;
+  NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternNb;
+  NBPtr->StitchMemory = MemNStitchMemoryNb;
+  NBPtr->AutoConfig = memNAutoConfigDA;
+  NBPtr->PlatformSpec = MemNPlatformSpecNb;
+  NBPtr->InitMCT = MemNInitMCTNb;
+  NBPtr->DisableDCT = MemNDisableDCTNb;
+  NBPtr->StartupDCT = MemNStartupDCTNb;
+  NBPtr->SyncTargetSpeed = MemNSyncTargetSpeedNb;
+  NBPtr->ChangeFrequency = MemNChangeFrequencyNb;
+  NBPtr->RampUpFrequency = MemNRampUpFrequencyNb;
+  NBPtr->ChangeNbFrequency = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefFalse;
+  NBPtr->ProgramCycTimings = MemNProgramCycTimingsNb;
+  NBPtr->SyncDctsReady = MemNSyncDctsReadyNb;
+  NBPtr->HtMemMapInit = MemNHtMemMapInitNb;
+  NBPtr->SyncAddrMapToAllNodes = MemNSyncAddrMapToAllNodesNb;
+  NBPtr->CpuMemTyping = MemNCPUMemTypingNb;
+  NBPtr->BeforeDqsTraining = MemNBeforeDQSTrainingNb;
+  NBPtr->AfterDqsTraining = (VOID (*) (MEM_NB_BLOCK*)) memDefRet;
+  NBPtr->OtherTiming = MemNOtherTimingDA;
+  NBPtr->UMAMemTyping = MemNUMAMemTypingNb;
+  NBPtr->TechBlockSwitch = MemNTechBlockSwitchNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDA;
+  NBPtr->SetEccSymbolSize = (VOID (*) (MEM_NB_BLOCK*)) memDefRet;
+  NBPtr->TrainingFlow = MemNTrainingFlowNb;
+  NBPtr->MinDataEyeWidth = MemNMinDataEyeWidthNb;
+  MemNInitNBDataNb (NBPtr);
+  NBPtr->PollBitField = MemNPollBitFieldNb;
+  NBPtr->BrdcstCheck = MemNBrdcstCheckNb;
+  NBPtr->BrdcstSet = MemNBrdcstSetNb;
+  NBPtr->GetTrainDly = MemNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemNSetTrainDlyNb;
+  NBPtr->PhyFenceTraining = MemNPhyFenceTrainingNb;
+  NBPtr->GetSysAddr = MemNGetMCTSysAddrNb;
+  NBPtr->RankEnabled = MemNRankEnabledNb;
+  NBPtr->MemPPhyFenceTrainingNb = MemNTrainPhyFenceNb;
+  NBPtr->MemNPlatformSpecificFormFactorInitNb = MemNPlatformSpecificFormFactorInitRb;
+  NBPtr->MemNBeforePlatformSpecNb = MemNBeforePlatformSpecDA;
+  NBPtr->MemNcmnGetSetTrainDly = MemNcmnGetSetTrainDlyNb;
+  NBPtr->MemPNodeMemBoundaryNb = MemPNodeMemBoundaryDA;
+  NBPtr->MemNInitPhyComp = MemNInitPhyCompNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelNb;
+  NBPtr->MemNBeforeDramInitNb = MemNBeforeDramInitDA;
+  NBPtr->MemNPFenceAdjustNb = (VOID (*) (MEM_NB_BLOCK *, INT16 *)) memDefRet;
+  NBPtr->GetTrainDlyParms = MemNGetTrainDlyParmsNb;
+  NBPtr->TrainingPatternInit = MemNTrainingPatternInitNb;
+  NBPtr->TrainingPatternFinalize = MemNTrainingPatternFinalizeNb;
+  NBPtr->GetApproximateWriteDatDelay = MemNGetApproximateWriteDatDelayNb;
+  NBPtr->CSPerChannel = MemNCSPerChannelNb;
+  NBPtr->CSPerDelay = MemNCSPerDelayNb;
+  NBPtr->FlushPattern = MemNFlushPatternNb;
+  NBPtr->GetUmaSize = MemNGetUmaSizeNb;
+  NBPtr->GetMemClkFreqId = MemNGetMemClkFreqIdNb;
+  NBPtr->MemNCapSpeedBatteryLife = MemNCapSpeedBatteryLifeDA;
+  NBPtr->EnableSwapIntlvRgn = MemNEnableSwapIntlvRgnNb;
+  NBPtr->WaitXMemClks = MemNWaitXMemClksNb;
+  NBPtr->MemNGetDramTerm = MemNGetDramTermNb;
+  NBPtr->MemNGetDynDramTerm = MemNGetDynDramTermNb;
+  NBPtr->MemNGetMR0CL = MemNGetMR0CLNb;
+  NBPtr->MemNGetMR0WR = MemNGetMR0WRNb;
+  NBPtr->MemNSaveMR0 = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+  NBPtr->MemNGetMR2CWL = MemNGetMR2CWLNb;
+  NBPtr->AllocateC6Storage = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+
+  NBPtr->IsSupported[SetSpareEn] = TRUE;
+  NBPtr->IsSupported[CheckSpareEn] = TRUE;
+  NBPtr->IsSupported[SetDllShutDown] = TRUE;
+  NBPtr->IsSupported[DimmBasedOnSpeed] = TRUE;
+  NBPtr->IsSupported[CheckMaxDramRate] = TRUE;
+  NBPtr->IsSupported[Check1GAlign] = TRUE;
+  NBPtr->IsSupported[CheckMaxRdDqsDlyPtr] = TRUE;
+  NBPtr->IsSupported[CheckPhyFenceTraining] = TRUE;
+  NBPtr->IsSupported[CheckGetMCTSysAddr] = TRUE;
+  NBPtr->IsSupported[CheckFindPSDct] = TRUE;
+  NBPtr->IsSupported[CheckDllStdBy] = TRUE;
+  NBPtr->IsSupported[CheckSlewWithMarginImprv] = TRUE;
+  NBPtr->IsSupported[CheckDllSpeedUp] = TRUE;
+  NBPtr->IsSupported[CheckDllRegDis] = TRUE;
+  NBPtr->IsSupported[ForceEnMemHoleRemapping] = TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the default values in the MEM_DATA_STRUCT
+ *
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+VOID
+MemNInitDefaultsRb (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT8 Socket;
+  UINT8 Channel;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  ASSERT (MemPtr != NULL);
+  RefPtr = MemPtr->ParameterListPtr;
+
+  // Memory Map/Mgt.
+  // Mask Bottom IO with 0xF8 to force hole size to have granularity of 128MB
+  RefPtr->BottomIo = 0xE0;
+  RefPtr->UmaMode = UserOptions.CfgUmaMode;
+  RefPtr->UmaSize = UserOptions.CfgUmaSize;
+  RefPtr->MemHoleRemapping = TRUE;
+  RefPtr->LimitMemoryToBelow1Tb = UserOptions.CfgLimitMemoryToBelow1Tb;
+
+  // Dram Timing
+  RefPtr->UserTimingMode = UserOptions.CfgTimingModeSelect;
+  RefPtr->MemClockValue = UserOptions.CfgMemoryClockSelect;
+  for (Socket = 0; Socket < MAX_SOCKETS_SUPPORTED; Socket++) {
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_SOCKET; Channel++) {
+      MemPtr->SocketList[Socket].ChannelPtr[Channel] = NULL;
+      MemPtr->SocketList[Socket].TimingsPtr[Channel] = NULL;
+    }
+  }
+
+  // Memory Clear
+  RefPtr->EnableMemClr = TRUE;
+
+  // TableBasedAlterations
+  RefPtr->TableBasedAlterations = NULL;
+
+  // Platform config table
+  RefPtr->PlatformMemoryConfiguration = DefaultPlatformMemoryConfiguration;
+
+  // Memory Restore
+  RefPtr->MemRestoreCtl = FALSE;
+  RefPtr->SaveMemContextCtl = FALSE;
+  AmdS3ParamsInitializer (&RefPtr->MemContext);
+
+  // Dram Configuration
+  RefPtr->EnableBankIntlv = UserOptions.CfgMemoryEnableBankInterleaving;
+  RefPtr->EnableNodeIntlv = UserOptions.CfgMemoryEnableNodeInterleaving;
+  RefPtr->EnableChannelIntlv = UserOptions.CfgMemoryChannelInterleaving;
+  RefPtr->EnableBankSwizzle = UserOptions.CfgBankSwizzle;
+  RefPtr->EnableParity = UserOptions.CfgMemoryParityEnable;
+  RefPtr->EnableOnLineSpareCtl = UserOptions.CfgOnlineSpare;
+
+  // Dram Power
+  RefPtr->EnablePowerDown = UserOptions.CfgMemoryPowerDown;
+
+  // ECC
+  RefPtr->EnableEccFeature = UserOptions.CfgEnableEccFeature;
+
+  // Vref
+  RefPtr->ExternalVrefCtl = UserOptions.CfgExternalVrefCtlFeature;
+
+  //Training Mode
+  RefPtr->ForceTrainMode = UserOptions.CfgForceTrainMode;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function writes training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Pattern[] - Pattern to write
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNWritePatternRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUWriteCachelines (Address, Pattern, ClCount);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function reads training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Buffer[] - Buffer to fill
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNReadPatternRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUReadCachelines (Buffer, Address, ClCount);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates DQS training for Server NB
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+memNEnableTrainSequenceRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN Retval;
+  Retval = TRUE;
+  if (!MemNIsIdSupportedRb (NBPtr, &(NBPtr->MemPtr->DiesPerSystem[NBPtr->MCTPtr->NodeId].LogicalCpuid))) {
+    Retval = FALSE;
+  }
+  return Retval;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnRb.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnRb.h
new file mode 100644
index 0000000000..ad7a32c22e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnRb.h
@@ -0,0 +1,124 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnRb.h
+ *
+ * Northbridge RB for RidgeBack
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/RB)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MNRB_H_
+#define _MNRB_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemNIsIdSupportedRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+BOOLEAN
+MemConstructNBBlockRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr,
+  IN       MEM_SHARED_DATA *SharedPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemNInitNBDataRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitDefaultsRb (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID
+MemNWritePatternRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemNReadPatternRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+BOOLEAN
+memNEnableTrainSequenceRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+#endif  /* _MNRB_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnS3Rb.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnS3Rb.c
new file mode 100644
index 0000000000..6e57723571
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnS3Rb.c
@@ -0,0 +1,775 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mns3Rb.c
+ *
+ * RB memory specific function to support S3 resume
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/Rb)
+ * @e \$Revision: 50673 $ @e \$Date: 2011-04-12 21:18:06 -0600 (Tue, 12 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "mnda.h"
+#include "mnRb.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mnS3Rb.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_RB_MNS3RB_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  );
+
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstRb (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  );
+
+VOID
+STATIC
+MemNS3SetSpecialPCIRegRb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+STATIC
+MemNS3ExitSelfRefRegRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+PCI_SPECIAL_CASE PciSpecialCaseFuncRb[] = {
+  {MemNS3GetCSRNb, MemNS3SetCSRNb},
+  {MemNS3GetCSRNb, MemNS3SetSpecialPCIRegRb},
+  {MemNS3GetBitFieldNb, MemNS3SetBitFieldNb}
+};
+
+PCI_REG_DESCRIPTOR ROMDATA S3PciPreSelfRefDescriptorRb[] = {
+  {{0, 0, 0}, FUNC_2, 0x110, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x40,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x48,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x50,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x58,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x60,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x68,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x70,  0xFFFF3F03},
+  {{0, 0, 0}, FUNC_1, 0x78,  0xFFFF3F03},
+  {{0, 1, 0}, FUNC_1, 0x140, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x148, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x150, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x158, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x160, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x168, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x170, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x178, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0x44,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x4C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x54,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x5C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x64,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x6C,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x74,  0xFFFF07FF},
+  {{0, 0, 0}, FUNC_1, 0x7C,  0xFFFF07FF},
+  {{0, 1, 0}, FUNC_1, 0x144, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x14C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x154, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x15C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x164, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x16C, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x174, 0x000000FF},
+  {{0, 1, 0}, FUNC_1, 0x17C, 0x000000FF},
+  {{0, 0, 0}, FUNC_1, 0xF0,  0xFF00FF83},
+  {{0, 0, 0}, FUNC_1, 0x120, 0x00FFFFFF},
+  {{0, 0, 0}, FUNC_1, 0x124, 0x07FFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x10C, 0x07F3FBF9},
+  {{0, 0, 0}, FUNC_2, 0x114, 0xFFFFFC00},
+  {{0, 0, 0}, FUNC_2, 0x118, 0xF773FFFF},
+  {{0, 0, 0}, FUNC_2, 0x11C, 0xFFFFFFFF},
+  {{0, 0, 0}, FUNC_2, 0x1B0, 0xFFD3FF3F}
+};
+
+CONST PCI_REGISTER_BLOCK_HEADER ROMDATA S3PciPreSelfRefRb = {
+  0,
+  (sizeof (S3PciPreSelfRefDescriptorRb) / sizeof (PCI_REG_DESCRIPTOR)),
+  S3PciPreSelfRefDescriptorRb,
+  NULL
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPreSelfDescriptorRb[] = {
+   // DCT 0
+  {{0, 0, 0}, FUNC_2, 0x40,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x44,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x48,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x4C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x50,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x54,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x58,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x5C,  0x1FF83FEF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x60,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x64,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x68,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x6C,  0x1FF83FE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x78,  0xFFCDBF0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x7C,  0xFFF7FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x80,  0x0000FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x84,  0x07FFEFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x88,  0xFFFFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x8C,  0xFFFF7FFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x90,  0x00FFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0xA8,  0x0007FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),  0x30333333, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0x3FFFFFFF, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),  0x001FBFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),  0x003F3F3F, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig0, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig1, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig2, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyClkConfig3, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  //errata 322
+  {{2, 2, 1}, DCT0,   BFErr322I, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFErr322II, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  //errata 263
+  {{2, 2, 1}, DCT0,   BFErr263, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  // Dll regulator disable
+  {{2, 2, 1}, DCT0,   BFPhy0x0D040F3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D042F3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D048F3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D04DF3E, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+
+   // DCT 1
+  {{0, 0, 0}, FUNC_2, 0x140, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x144, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x148, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x14C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x150, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x154, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x158, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x15C, 0x1FF83FEF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x160, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x164, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x168, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x16C, 0x1FF83FE0, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x178, 0xFFCDBF0F, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x17C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 2, 0}, FUNC_2, 0x180, 0x0000FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x184, 0x07FFEFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x188, 0xFFFFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x18C, 0xFFF7FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x190, 0x00FFFFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x1A8, 0x0007FFFF, DCT1_MASK, DCT1_ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00), 0x30333333, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C), 0x001FBFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{1, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04), 0x003F3F3F, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig0, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig1, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig2, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyClkConfig3, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 322
+  {{2, 2, 1}, DCT1,   BFErr322I, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFErr322II, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // errata 263
+  {{2, 2, 1}, DCT1,   BFErr263, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  // Dll regulator disable
+  {{2, 2, 1}, DCT1,   BFPhy0x0D040F3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D042F3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D048F3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D04DF3E, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Restore F2x[1,0]94 right before exit self refresh
+  {{0, 0, 0}, FUNC_2, 0x94,  0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_2, 0x194, 0xFFFFFF07, ANY_DIMM_MASK, ANY_DIMM_MASK}
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPreSelfRefRb = {
+  0,
+  (sizeof (S3CPciPreSelfDescriptorRb) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPreSelfDescriptorRb,
+  PciSpecialCaseFuncRb
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPostSelfDescriptorRb[] = {
+  // DCT0
+  {{2, 2, 1}, DCT0,   BFEccDLLPwrDnConf, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFEccDLLConf, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x10),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x11),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x12),  0x000001FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x13),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x14),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x15),  0x000001FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x16),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x17),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x18),  0x000001FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x19),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1B),  0x000001FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x20),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x21),  0x01FF01FF, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x23),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x24),  0x01FF01FF, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x26),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x27),  0x01FF01FF, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x29),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x2A),  0x01FF01FF, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x01),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x02),  0x7F7F7F7F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x03),  0x0000007F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x101), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x102), 0x7F7F7F7F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x103), 0x0000007F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x201), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x202), 0x7F7F7F7F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x203), 0x0000007F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x301), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x302), 0x7F7F7F7F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x303), 0x0000007F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x05),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x06),  0x3F3F3F3F, DCT0_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x07),  0x0000003F, DCT0_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x105), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x106), 0x3F3F3F3F, DCT0_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x107), 0x0000003F, DCT0_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x205), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x206), 0x3F3F3F3F, DCT0_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x207), 0x0000003F, DCT0_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x305), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x306), 0x3F3F3F3F, DCT0_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x307), 0x0000003F, DCT0_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),  0xFFFFFFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0D),  0x23772377, DCT0_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x30),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x31),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x32),  0x000000FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x33),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x34),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x35),  0x000000FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x36),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x37),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x38),  0x000000FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x39),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3B),  0x000000FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x40),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x41),  0x00FF00FF, DCT0_DDR3_MASK, 0x01},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x43),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x44),  0x00FF00FF, DCT0_DDR3_MASK, 0x04},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x46),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x47),  0x00FF00FF, DCT0_DDR3_MASK, 0x10},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x49),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x4A),  0x00FF00FF, DCT0_DDR3_MASK, 0x40},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D0F0F13, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D0F0830, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhy0x0D07812F, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyDLLControl, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+
+    // DCT1
+  {{2, 2, 1}, DCT1,   BFEccDLLPwrDnConf, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFEccDLLConf, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x10),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x11),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x12),  0x000001FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x13),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x14),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x15),  0x000001FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x16),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x17),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x18),  0x000001FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x19),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 2, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x1B),  0x000001FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x20),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x21),  0x01FF01FF, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x23),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x24),  0x01FF01FF, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x26),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x27),  0x01FF01FF, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x29),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x2A),  0x01FF01FF, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x01),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x02),  0x7F7F7F7F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x03),  0x0000007F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x101),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x102),  0x7F7F7F7F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x103),  0x0000007F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x201),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x202),  0x7F7F7F7F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x203),  0x0000007F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x301),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x302),  0x7F7F7F7F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x303),  0x0000007F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x05),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x06),  0x3F3F3F3F, DCT1_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x07),  0x0000003F, DCT1_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x105),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x106),  0x3F3F3F3F, DCT1_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x107),  0x0000003F, DCT1_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x205),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x206),  0x3F3F3F3F, DCT1_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x207),  0x0000003F, DCT1_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x305),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x306),  0x3F3F3F3F, DCT1_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x307),  0x0000003F, DCT1_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0D),  0x23772377, DCT1_MASK, ANY_DIMM_MASK},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x30),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x31),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x32),  0x000000FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x33),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x34),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x35),  0x000000FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x36),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x37),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x38),  0x000000FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x39),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 1, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x3B),  0x000000FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x40),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x41),  0x00FF00FF, DCT1_DDR3_MASK, 0x02},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x43),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x44),  0x00FF00FF, DCT1_DDR3_MASK, 0x08},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x46),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x47),  0x00FF00FF, DCT1_DDR3_MASK, 0x20},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x49),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x4A),  0x00FF00FF, DCT1_DDR3_MASK, 0x80},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D0F0F13, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D0F0830, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhy0x0D07812F, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyDLLControl, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+
+  // DllShutDown
+  {{2, 2, 1}, DCT0,   BFPhyPLLLockTime, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT0,   BFPhyDLLLockTime, 0x0000FFFF, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT0,   BFDisDllShutdownSR, 0x00000001, DCT0_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyPLLLockTime, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 2, 1}, DCT1,   BFPhyDLLLockTime, 0x0000FFFF, DCT1_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT1,   BFDisDllShutdownSR, 0x00000001, DCT1_MASK, ANY_DIMM_MASK},
+
+  // Restore scrubber related registers after restoring training related registers
+  {{0, 0, 0}, FUNC_3, 0x44,  0xFFFFFFFE, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{0, 0, 0}, FUNC_3, 0x58,  0x1F1F1F1F, ANY_DIMM_MASK, ANY_DIMM_MASK},
+  {{2, 1, 1}, DCT0,   BFScrubReDirEn, 0x00000001, ANY_DIMM_MASK, ANY_DIMM_MASK},
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPostSelfRefRb = {
+  0,
+  (sizeof (S3CPciPostSelfDescriptorRb) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+  S3CPciPostSelfDescriptorRb,
+  PciSpecialCaseFuncRb
+};
+
+MSR_REG_DESCRIPTOR ROMDATA S3MSRPreSelfRefDescriptorRb[] = {
+  {{0, 0, 0}, 0xC0010010, 0x00000000007F07FF},
+  {{0, 0, 0}, 0xC001001A, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001D, 0x0000FFFFFF800000},
+  {{0, 0, 0}, 0xC001001F, 0xC047F87FFF527FFF}
+};
+
+CONST MSR_REGISTER_BLOCK_HEADER ROMDATA S3MSRPreSelfRefRb = {
+  0,
+  (sizeof (S3MSRPreSelfRefDescriptorRb) / sizeof (MSR_REG_DESCRIPTOR)),
+  S3MSRPreSelfRefDescriptorRb,
+  NULL
+};
+
+VOID *MemS3RegListRb[] = {
+  (VOID *)&S3PciPreSelfRefRb,
+  NULL,
+  (VOID *)&S3CPciPreSelfRefRb,
+  (VOID *)&S3CPciPostSelfRefRb,
+  (VOID *)&S3MSRPreSelfRefRb,
+  NULL,
+  NULL,
+  NULL
+};
+
+CONST UINT16 ROMDATA SpecialCasePCIRegRb[] = {
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0A),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x00),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x0C),
+  SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 1, 0x04)
+};
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemNIsIdSupportedRb
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ *     @return          TRUE -  This node is a RB.
+ *     @return          FALSE - This node is not a RB.
+ *
+ */
+BOOLEAN
+MemNIsIdSupportedRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+
+  if (((LogicalIdPtr->Family & AMD_FAMILY_10_RB) != 0)
+      && ((LogicalIdPtr->Revision & AMD_F10_RB_ALL) != 0)) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for S3 resume
+ *
+ *     @param[in,out]   *S3NBPtr   - Pointer to MEM_NB_BLOCK.
+ *     @param[in,out]   *MemPtr  - Pointer to MEM_DATA_STRUCT.
+ *     @param[in]       NodeID   - Node ID of the target node.
+ *
+ *      @return         BOOLEAN
+ *                         TRUE - This is the correct constructor for the targeted node.
+ *                         FALSE - This isn't the correct constructor for the targeted node.
+ */
+BOOLEAN
+MemS3ResumeConstructNBBlockRb (
+  IN OUT   VOID *S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  INT32 i;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = ((S3_MEM_NB_BLOCK *)S3NBPtr)->NBPtr;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedRb (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  InitNBRegTableDA (NBPtr, NBPtr->NBRegTable);
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->Ganged = FALSE;
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DA;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+
+  for (i = 0; i < EnumSize; i++) {
+    NBPtr->IsSupported[i] = FALSE;
+  }
+
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) memDefTrue;
+  }
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &MemPtr->StdHeader);
+
+  NBPtr->IsSupported[CheckDllSpeedUp] = TRUE;
+  NBPtr->SwitchDCT = MemNSwitchDCTNb;
+  NBPtr->SwitchChannel = MemNSwitchChannelNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDA;
+  NBPtr->MemNIsIdSupportedNb = MemNIsIdSupportedRb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3ExitSelfRefReg = MemNS3ExitSelfRefRegRb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConPCIMask = MemNS3GetConPCIMaskNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConMSRMask = (VOID (*) (MEM_NB_BLOCK*, DESCRIPTOR_GROUP*)) memDefRet;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3Resume = MemNS3ResumeNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3RestoreScrub = MemNS3RestoreScrubNb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetRegLstPtr = MemNS3GetRegLstPtrRb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetDeviceRegLst = MemNS3GetDeviceRegLstRb;
+  ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3SpecialCaseHeapSize = (sizeof (SpecialCasePCIRegRb) / sizeof (UINT16)) * sizeof (UINT32);
+
+  MemNSwitchDCTNb (NBPtr, 0);
+
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns the register list for each device for RB
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in, out]  *DescriptPtr - Pointer to DESCRIPTOR_GROUP
+ *     @return          UINT16 - size of the device descriptor on the target node.
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  )
+{
+  UINT8 i;
+  UINT16 Size;
+  Size = 0;
+  for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+    DescriptPtr->PCIDevice[i].Type = (UINT8) (DEV_TYPE_PCI_PRE_ESR + i);
+    DescriptPtr->PCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->PCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((PCI_REGISTER_BLOCK_HEADER *) MemS3RegListRb[PCI_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->PCIDevice[i].RegisterListID = PCI_LST_ESR_DA + i;
+      Size += sizeof (PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CPCIDevice[i].Type = (UINT8) (DEV_TYPE_CPCI_PRE_ESR + i);
+    DescriptPtr->CPCIDevice[i].Node = NBPtr->Node;
+    DescriptPtr->CPCIDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CPCI_REGISTER_BLOCK_HEADER *) MemS3RegListRb[CPCI_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->CPCIDevice[i].RegisterListID = CPCI_LST_ESR_DA + i;
+      Size += sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->MSRDevice[i].Type = (UINT8) (DEV_TYPE_MSR_PRE_ESR + i);
+    DescriptPtr->MSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((MSR_REGISTER_BLOCK_HEADER *) MemS3RegListRb[MSR_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->MSRDevice[i].RegisterListID = MSR_LST_ESR_DA + i;
+      Size += sizeof (MSR_DEVICE_DESCRIPTOR);
+    }
+    DescriptPtr->CMSRDevice[i].Type = (UINT8) (DEV_TYPE_CMSR_PRE_ESR + i);
+    DescriptPtr->CMSRDevice[i].RegisterListID = 0xFFFFFFFF;
+    if ((CMSR_REGISTER_BLOCK_HEADER *) MemS3RegListRb[CMSR_LST_ESR_DA - PCI_LST_ESR_DA + i] != NULL) {
+      DescriptPtr->CMSRDevice[i].RegisterListID = CMSR_LST_ESR_DA + i;
+      Size += sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR);
+    }
+  }
+  return Size;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function return the register list according to the register ID.
+ *
+ *     @param[in]   RegisterLstID - value of the Register list ID.
+ *     @param[out]  **RegisterHeader - pointer to the address of the register list.
+ *     @return      none
+ */
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstRb (
+  IN       UINT32 RegisterLstID,
+     OUT   VOID **RegisterHeader
+  )
+{
+  if (RegisterLstID >= (sizeof (MemS3RegListRb) / sizeof (VOID *))) {
+    ASSERT(FALSE); // RegisterListID exceeded size of Register list
+    return AGESA_FATAL;
+  }
+  if (MemS3RegListRb[RegisterLstID] != NULL) {
+    *RegisterHeader = MemS3RegListRb[RegisterLstID];
+    return AGESA_SUCCESS;
+  }
+  ASSERT(FALSE); // Device register list error
+  return AGESA_FATAL;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in]   *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *      @return         none
+ */
+VOID
+STATIC
+MemNS3SetSpecialPCIRegRb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (Address.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_DA; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_DA);
+    // Save the value in the heap at appropriate offset based on the index
+    // of the target register in the special case array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegRb) / sizeof (UINT16)); i ++) {
+        if (SpecialCasePCIRegRb[i] == Address.Address.Register) {
+          *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2)) = *(UINT32 *) Value;
+        }
+      }
+    }
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function stores special case register on the heap.
+ *
+ *     @param[in,out]  *NBPtr - Pointer to the northbridge block.
+ *     @param[in,out]  *StdHeader - Config handle for library and services.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3ExitSelfRefRegRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  UINT8 i;
+  PCI_ADDR PciAddr;
+  UINT32 Value;
+  UINT8 NodeID;
+  UINT8 Offset;
+  S3_SPECIAL_CASE_HEAP_HEADER *SpecialHeapHeader;
+
+  Offset = 0;
+  PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+  PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+  PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+  PciAddr.Address.Function = 2;
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, StdHeader) == AGESA_SUCCESS) {
+    SpecialHeapHeader = (S3_SPECIAL_CASE_HEAP_HEADER *) LocateBufferPtr.BufferPtr;
+    // Get the node ID of the target die.
+    NodeID = (UINT8) (PciAddr.Address.Device - 24);
+    for (i = 0; i < MAX_NODES_SUPPORTED_DA; i ++) {
+      if (SpecialHeapHeader[i].Node == NodeID) {
+        // Get the offset in the heap for the target die.
+        Offset = SpecialHeapHeader[i].Offset;
+        break;
+      }
+    }
+    ASSERT (i < MAX_NODES_SUPPORTED_DA);
+    // Restore the value one by one in the sequence of the special case register array.
+    if (Offset != 0) {
+      for (i = 0; i < (sizeof (SpecialCasePCIRegRb) / sizeof (UINT16)); i ++) {
+        PciAddr.Address.Register = SpecialCasePCIRegRb[i];
+        Value = *(UINT32 *) (LocateBufferPtr.BufferPtr + Offset + (i << 2));
+        MemNS3SetCSRNb (AccessS3SaveWidth32, PciAddr, &Value, StdHeader);
+      }
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnS3Rb.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnS3Rb.h
new file mode 100644
index 0000000000..dbacb31f73
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnS3Rb.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnS3Rb.h
+ *
+ * S3 resume memory related function for RB.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/RB)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MNS3RB_H_
+#define _MNS3RB_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+/// ID for register list of RB
+typedef enum {
+  PCI_LST_ESR_DA,   ///< Assign 0x0000 for PCI register list for pre exit self refresh.
+  PCI_LST_DA,       ///< Assign 0x0001 for PCI register list for post exist self refresh.
+  CPCI_LST_ESR_DA,  ///< Assign 0x0002 for conditional PCI register list for pre exit self refresh.
+  CPCI_LST_DA,      ///< Assign 0x0003 for conditional PCI register list for post exit self refresh.
+  MSR_LST_ESR_DA,   ///< Assign 0x0004 for MSR register list for pre exit self refresh.
+  MSR_LST_DA,       ///< Assign 0x0005 for MSR register list for post exit self refresh.
+  CMSR_LST_ESR_DA,  ///< Assign 0x0006 for conditional MSR register list for pre exit self refresh.
+  CMSR_LST_DA,      ///< Assign 0x0007 for conditional MSR register list for post exit self refresh.
+} RegisterListIDDA;
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif //_MNS3RB_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnflowRb.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnflowRb.c
new file mode 100644
index 0000000000..99bf9bd603
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnflowRb.c
@@ -0,0 +1,141 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnflowRb.c
+ *
+ * RidgeBack initializer for MCT and DCT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/RB)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mnda.h"
+#include "mnRb.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_RB_MNFLOWRB_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PLAT_SPEC_CFG* memPlatSpecFFInstalledRb[MAX_FF_TYPES];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function initializes the platform specific block
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - AGESA_SUCCESS at least one dorm factor was found
+ *     @return          FALSE - AGESA_UNSUPPORTED - Error indicating that no form factors were found
+ */
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 f;
+  UINT8 ErrUnSuppFFCount;
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->ChannelPtr->ChDimmValid != 0) {
+      ErrUnSuppFFCount = 0;
+      for (f = 0; f < MAX_FF_TYPES; f++) {
+        ASSERT (memPlatSpecFFInstalledRb[f] != NULL);
+        if (memPlatSpecFFInstalledRb[f] (NBPtr->MemPtr, NBPtr->ChannelPtr, NBPtr->PsPtr) == AGESA_UNSUPPORTED) {
+          ErrUnSuppFFCount++; //Count the number of AGESA_UNSUPPORTED errors
+        } else {
+          break;
+        }
+      }
+      if (ErrUnSuppFFCount == MAX_FF_TYPES) {
+        return FALSE; // No FF types are supported
+      }
+    }
+  }
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnidendimmRb.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnidendimmRb.c
new file mode 100644
index 0000000000..d29ec7bc74
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/RB/mnidendimmRb.c
@@ -0,0 +1,141 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnidendimmRb.c
+ *
+ * RB northbridge constructor for dimm identification translator.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/RB)
+ * @e \$Revision: 45911 $ @e \$Date: 2011-01-24 13:55:11 -0700 (Mon, 24 Jan 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"       // need def for MEM_FEAT_BLOCK_NB
+#include "mnda.h"
+#include "mnRb.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_RB_MNIDENDIMMRB_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the northbridge block for dimm identification translator
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in,out]   NodeID   - ID of current node to construct
+ *     @return          TRUE     - This is the correct constructor for the targeted node.
+ *     @return          FALSE    - This isn't the correct constructor for the targeted node.
+ *
+ */
+
+BOOLEAN
+MemNIdentifyDimmConstructorRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemNIsIdSupportedRb (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  NBPtr->NodeCount = MAX_NODES_SUPPORTED_DA;
+  NBPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  NBPtr->CsRegMsk = 0x1FF83FE0;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+  NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+  NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+  NBPtr->Ganged = FALSE;
+  InitNBRegTableDA (NBPtr, NBPtr->NBRegTable);
+  NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldDA;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelNb;
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mn.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mn.c
new file mode 100644
index 0000000000..dafff2d546
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mn.c
@@ -0,0 +1,530 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mn.c
+ *
+ * Common Northbridge functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_MN_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemNDefaultFamilyHookNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_MEM_FEATURE_NB* memNTrainFlowControl[];
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes member functions and variables of NB block.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitNBDataNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  INT32 i;
+  UINT8 *BytePtr;
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+  NBPtr->PsPtr = NBPtr->PSBlock;
+
+  BytePtr = (UINT8 *) (NBPtr->DctCache);
+  for (i = 0; i < sizeof (NBPtr->DctCache); i++) {
+    *BytePtr++ = 0;
+  }
+
+  for (i = 0; i < EnumSize; i++) {
+    NBPtr->IsSupported[i] = FALSE;
+  }
+
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = MemNDefaultFamilyHookNb;
+  }
+
+  for (i = 0; i < NBPtr->DctCount; i++) {
+    NBPtr->PSBlock[i].MemPGetPass1Seeds = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefTrue;
+  }
+
+  NBPtr->SwitchDCT = MemNSwitchDCTNb;
+  NBPtr->SwitchChannel = MemNSwitchChannelNb;
+  NBPtr->GetBitField = MemNGetBitFieldNb;
+  NBPtr->SetBitField = MemNSetBitFieldNb;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   Get System address of Chipselect RJ 16 bits (Addr[47:16])
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Receiver - Chipselect to be targeted [0-7]
+ *     @param[out]      AddrPtr -  Pointer to System Address [47:16]
+ *
+ *     @return      TRUE  - Address is valid
+ *     @return      FALSE  - Address is not valid
+ */
+
+BOOLEAN
+MemNGetMCTSysAddrNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Receiver,
+     OUT   UINT32 *AddrPtr
+  )
+{
+  S_UINT64 SMsr;
+  UINT32 CSBase;
+  UINT32 HoleBase;
+  UINT32 DctSelBaseAddr;
+  UINT32 BottomUma;
+  DIE_STRUCT *MCTPtr;
+  MEM_DATA_STRUCT *MemPtr;
+
+  MCTPtr = NBPtr->MCTPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  ASSERT (Receiver < 8);
+
+  CSBase = MemNGetBitFieldNb (NBPtr, BFCSBaseAddr0Reg + Receiver);
+  if (CSBase & 1) {
+    ASSERT ((CSBase & 0xE0) == 0);   // Should not enable CS interleaving before DQS training.
+
+    // Scale base address from [39:8] to [47:16]
+    CSBase >>= 8;
+
+    HoleBase = MCTPtr->NodeHoleBase ? MCTPtr->NodeHoleBase : 0x7FFFFFFF;
+
+    if ((MemNGetBitFieldNb (NBPtr, BFDctSelHiRngEn) == 1) && (NBPtr->Dct == MemNGetBitFieldNb (NBPtr, BFDctSelHi))) {
+      DctSelBaseAddr = MemNGetBitFieldNb (NBPtr, BFDctSelBaseAddr) << (27 - 16);
+      if (DctSelBaseAddr > HoleBase) {
+        DctSelBaseAddr -= _4GB_RJ16 - HoleBase;
+      }
+      CSBase += DctSelBaseAddr;
+    } else {
+      CSBase += MCTPtr->NodeSysBase;
+    }
+
+    if (CSBase >= HoleBase) {
+      CSBase += _4GB_RJ16 - HoleBase;
+    }
+
+    CSBase += (UINT32)1 << (21 - 16);  // Add 2MB offset to avoid compat area.
+    if ((CSBase >= (MCT_TRNG_KEEPOUT_START >> 8)) && (CSBase <= (MCT_TRNG_KEEPOUT_END >> 8))) {
+      CSBase += (((MCT_TRNG_KEEPOUT_END >> 8) - CSBase) + 0x0F) & 0xFFFFFFF0;
+    }
+
+    if (MCTPtr->Status[SbHWHole]) {
+      if (MCTPtr->Status[SbSWNodeHole]) {
+        LibAmdMsrRead (TOP_MEM, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+        if ((CSBase >= (SMsr.lo >> 16)) && (CSBase < _4GB_RJ16)) {
+          return FALSE;
+        }
+      }
+    }
+
+    BottomUma = NBPtr->RefPtr->Sub4GCacheTop >> 16;
+    if (BottomUma && (CSBase >= BottomUma) && (CSBase < _4GB_RJ16)) {
+      return FALSE;
+    }
+    *AddrPtr = CSBase;
+    return TRUE;
+  }
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function determines if a Rank is enabled.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]    Receiver - Receiver to check
+ *     @return - FALSE
+ *
+ */
+
+BOOLEAN
+MemNRankEnabledNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Receiver
+  )
+{
+  UINT32 CSBase;
+  CSBase = MemNGetBitFieldNb (NBPtr, BFCSBaseAddr0Reg + Receiver);
+  if (CSBase & 1) {
+    return  TRUE;
+  } else {
+    return  FALSE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     This function sets the EccSymbolSize bit depending upon configurations
+ *     and system override.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSetEccSymbolSizeNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT16 X4DimmsOnly;
+  BOOLEAN Size;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+
+  ASSERT (NBPtr != NULL);
+
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+
+  // Determine if this node has only x4 DRAM parts
+  X4DimmsOnly = (UINT16) ((!(DCTPtr->Timings.Dimmx8Present | DCTPtr->Timings.Dimmx16Present)) && DCTPtr->Timings.Dimmx4Present);
+  //
+  // Check if EccSymbolSize BKDG value is overridden
+  //
+  if (UserOptions.CfgEccSymbolSize != ECCSYMBOLSIZE_USE_BKDG) {
+    Size = (UserOptions.CfgEccSymbolSize == ECCSYMBOLSIZE_FORCE_X4) ? FALSE : TRUE;
+  } else {
+    if (X4DimmsOnly && MCTPtr->GangedMode) {
+      Size = FALSE;
+    } else {
+      Size = TRUE;
+    }
+  }
+  IDS_OPTION_HOOK (IDS_ECCSYMBOLSIZE, &Size, &(NBPtr->MemPtr->StdHeader));
+  MemNSetBitFieldNb (NBPtr, BFEccSymbolSize, (UINT32) Size);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets the training control flow
+ *      The DDR3 mode bit must be set prior to calling this function
+ *
+ *      @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ */
+BOOLEAN
+MemNTrainingFlowNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode)!= 0) {
+    memNTrainFlowControl[DDR3_TRAIN_FLOW] (NBPtr);
+  } else {
+    memNTrainFlowControl[DDR2_TRAIN_FLOW] (NBPtr);
+  }
+  return TRUE;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function flushes the  training pattern
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNFlushPatternNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  // Due to speculative execution during MemUReadCachelines, we must
+  //  flush one more cache line than we read.
+  MemUProcIOClFlush (Address, ClCount + 1, NBPtr->MemPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function compares test pattern with data in buffer and
+ *     return a pass/fail bitmap for 8 bytelanes (upper 8 bits are reserved)
+ *
+ *     @param[in,out]   *NBPtr    - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Buffer[]  - Buffer data from DRAM (Measured data from DRAM) to compare
+ *     @param[in]       Pattern[] - Pattern (Expected data in ROM/CACHE) to compare against
+ *     @param[in]       ByteCount - Byte count
+ *
+ *     @return  PASS - Bitmap of results of comparison
+ */
+
+UINT16
+MemNCompareTestPatternNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  )
+{
+  UINT16 i;
+  UINT16 Pass;
+  UINT8 ColumnCount;
+  UINT8 FailingBitMask[8];
+
+  ASSERT ((ByteCount == 18 * 64) || (ByteCount == 9 * 64) || (ByteCount == 64 * 64) || (ByteCount == 32 * 64) || (ByteCount == 3 * 64));
+
+  ColumnCount = NBPtr->ChannelPtr->ColumnCount;
+  Pass = 0xFFFF;
+  //
+  // Clear Failing Bit Mask
+  //
+  for (i = 0; i < sizeof (FailingBitMask); i++) {
+    FailingBitMask[i] = 0;
+  }
+
+  if (NBPtr->Ganged && (NBPtr->Dct != 0)) {
+    i = 8;   // DCT 1 in ganged mode
+  } else {
+    i = 0;
+  }
+
+  for (; i < ByteCount; i++) {
+    if (Buffer[i] != Pattern[i]) {
+      // if bytelane n fails
+      Pass &= ~((UINT16)1 << (i % 8));    // clear bit n
+      FailingBitMask[i % NBPtr->TechPtr->MaxByteLanes ()] |= (Buffer[i] ^ Pattern[i]);
+    }
+
+    if (NBPtr->Ganged && ((i & 7) == 7)) {
+      i += 8;     // if ganged, skip over other Channel's Data
+    }
+  }
+  //
+  // Accumulate Failing bit data
+  //
+  for (i = 0; i < sizeof (FailingBitMask); i++) {
+    NBPtr->ChannelPtr->FailingBitMask[(ColumnCount * NBPtr->TechPtr->ChipSel) + i] &=
+      FailingBitMask[i];
+  }
+
+  return Pass;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function compares test pattern with data in buffer and
+ *     return a pass/fail bitmap for 8 bytelanes (upper 8 bits are reserved)
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Buffer[]  - Buffer data from DRAM (Measured data from DRAM) to compare
+ *     @param[in]       Pattern[] - Pattern (Expected data in ROM/CACHE) to compare against
+ *     @param[in]       ByteCount - Byte count
+ *
+ *     @retval  PASS - Bitmap of results of comparison
+ * ----------------------------------------------------------------------------
+ */
+UINT16
+MemNInsDlyCompareTestPatternNb (
+  IN       MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  )
+{
+  UINT16 i;
+  UINT16 Pass;
+  UINT16 BeatOffset;
+  UINT16 BeatCnt;
+  UINT8 ColumnCount;
+  UINT8 FailingBitMask[8];
+
+  ASSERT ((ByteCount == 18 * 64) || (ByteCount == 9 * 64) || (ByteCount == 64 * 64) || (ByteCount == 32 * 64) || (ByteCount == 3 * 64));
+
+  ColumnCount = NBPtr->ChannelPtr->ColumnCount;
+  Pass = 0xFFFF;
+  //
+  // Clear Failing Bit Mask
+  //
+  for (i = 0; i < sizeof (FailingBitMask); i++) {
+    FailingBitMask[i] = 0;
+  }
+
+  if (NBPtr->Ganged && (NBPtr->Dct != 0)) {
+    i = 8;   // DCT 1 in ganged mode
+  } else {
+    i = 0;
+  }
+
+  if (NBPtr->Ganged) {
+    BeatOffset = 16;
+  } else {
+    BeatOffset = 8;
+  }
+
+  BeatCnt = 0;
+  for (; i < ByteCount; i++) {
+
+    if (Buffer[i] != Pattern[i + BeatOffset]) {
+      // if bytelane n fails
+      Pass &= ~((UINT16)1 << (i % 8));    // clear bit n
+      FailingBitMask[i % NBPtr->TechPtr->MaxByteLanes ()] |= (Buffer[i] ^ Pattern[i + BeatOffset]);
+    }
+
+    if ((i & 7) == 7) {
+      if (NBPtr->Ganged) {
+        i += 8;     // if ganged, skip over other Channel's Data
+      }
+      BeatCnt++;
+    }
+
+    if ((BeatCnt & 3) == 3) {
+      // Skip last data beat of a 4-beat burst.
+      BeatCnt++;
+      i = i + BeatOffset;
+    }
+  }
+  //
+  // Accumulate Failing bit data
+  //
+  for (i = 0; i < sizeof (FailingBitMask); i++) {
+    NBPtr->ChannelPtr->FailingBitMask[(ColumnCount * NBPtr->TechPtr->ChipSel) + i] &=
+      FailingBitMask[i];
+  }
+
+  return Pass;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets the training control flow for UNB
+ *      The DDR3 mode bit must be set prior to calling this function
+ *
+ *      @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ */
+BOOLEAN
+MemNTrainingFlowUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  memNTrainFlowControl[DDR3_TRAIN_FLOW] (NBPtr);
+  return TRUE;
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function is an empty function used to intialize FamilySpecificHook array
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return  TRUE - always
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemNDefaultFamilyHookNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnS3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnS3.c
new file mode 100644
index 0000000000..aa1b6f52a8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnS3.c
@@ -0,0 +1,1356 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnS3.c
+ *
+ * Common Northbridge S3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 51373 $ @e \$Date: 2011-04-21 13:10:59 -0600 (Thu, 21 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_MNS3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemNS3GetSetBitField (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       BOOLEAN IsSet,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+BOOLEAN
+STATIC
+MemNS3GetDummyReadAddr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+     OUT   UINT64 *TestAddr
+  );
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function executes the S3 resume for a node
+ *
+ *     @param[in,out]   *S3NBPtr - Pointer to the S3_MEM_NB_BLOCK
+ *     @param[in]       NodeID - The Node id of the target die
+ *
+ *     @return         BOOLEAN
+ *                         TRUE - This is the correct constructor for the targeted node.
+ *                         FALSE - This isn't the correct constructor for the targeted node.
+ */
+
+BOOLEAN
+MemNS3ResumeNb (
+  IN OUT   S3_MEM_NB_BLOCK *S3NBPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 DCT;
+  BOOLEAN GangedEn;
+  UINT64 TestAddr;
+  MEM_NB_BLOCK *NBPtr;
+  MEM_DATA_STRUCT *MemPtr;
+
+  NBPtr = S3NBPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  GangedEn = (MemNGetBitFieldNb (NBPtr, BFDctGangEn) == 1) ? TRUE : FALSE;
+
+  // Errata before S3 resume sequence
+
+  // Resume Sequence
+  // 1. Program F2x[1,0]9C_x08[DisAutoComp]=1
+  MemNSwitchDCTNb (NBPtr, 0);
+  MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 1);
+
+  // Program F2x[1, 0]94[MemClkFreqVal] = 1.
+  // 2. Wait for F2x[1,0]94[FreqChgInPrg]=0
+  for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+    MemNSwitchDCTNb (NBPtr, DCT);
+    if ((MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) && !((DCT == 1) && GangedEn)) {
+      MemNSetBitFieldNb (NBPtr, BFMemClkFreqVal, 1);
+      while (MemNGetBitFieldNb (NBPtr, BFFreqChgInProg) != 0) {}
+    }
+  }
+
+  // Program F2x9C_x08[DisAutoComp]=0
+  MemNSwitchDCTNb (NBPtr, 0);
+  MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 0);
+  //    BIOS must wait 750 us for the phy compensation engine
+  //    to reinitialize.
+  MemFS3Wait10ns (75000, NBPtr->MemPtr);
+
+  // 3. Restore F2x[1,0]90_x00, F2x9C_x0A, and F2x[1,0]9C_x0C
+  // 4. Restore F2x[1,0]9C_x04
+  // Get the register value from the heap.
+  S3NBPtr->MemS3ExitSelfRefReg (NBPtr, &MemPtr->StdHeader);
+
+  // Add a hook here
+  AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader);
+  if (AgesaHookBeforeExitSelfRefresh (0, MemPtr) == AGESA_SUCCESS) {
+  }
+  AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader);
+
+  // 5. Set F2x[1,0]90[ExitSelfRef]
+  // 6. Wait for F2x[1,0]90[ExitSelfRef]=0
+  for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+    MemNSwitchDCTNb (NBPtr, DCT);
+    if ((MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) && !((DCT == 1) && GangedEn)) {
+      MemNSetBitFieldNb (NBPtr, BFExitSelfRef, 1);
+      while (MemNGetBitFieldNb (NBPtr, BFExitSelfRef) != 0) {}
+    }
+    if ((MemNGetBitFieldNb (NBPtr, BFMemClkFreq) == DDR1333_FREQUENCY) && (NBPtr->IsSupported[CheckDllSpeedUp])) {
+      MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F11, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D080F11) | 0x2000));
+      MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F10, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D080F10) | 0x2000));
+      MemNSetBitFieldNb (NBPtr, BFPhy0x0D088F30, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D088F30) | 0x2000));
+      MemNSetBitFieldNb (NBPtr, BFPhy0x0D08C030, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D08C030) | 0x2000));
+      if (DCT == 0) {
+        MemNSetBitFieldNb (NBPtr, BFPhy0x0D082F30, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D082F30) | 0x2000));
+      }
+      // NOTE: wait 512 clocks for DLL-relock
+      MemFS3Wait10ns (50000, NBPtr->MemPtr);  // wait 500us
+    }
+  }
+
+  // Errata After S3 resume sequence
+  // Errata 350
+  for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+    MemNSwitchDCTNb (NBPtr, DCT);
+    if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) {
+      if (!((DCT == 1) && GangedEn)) {
+        if (MemNS3GetDummyReadAddr (NBPtr, &TestAddr)) {
+          // Do dummy read
+          Read64Mem8 (TestAddr);
+          // Flush the cache line
+          LibAmdCLFlush (TestAddr, 1);
+        }
+      }
+      MemNSetBitFieldNb (NBPtr, BFErr350, 0x8000);
+      MemFS3Wait10ns (60, NBPtr->MemPtr);   // Wait 300ns
+      MemNSetBitFieldNb (NBPtr, BFErr350, 0x0000);
+      MemFS3Wait10ns (400, NBPtr->MemPtr);  // Wait 2us
+    }
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function executes the S3 resume for a node on a client NB
+ *
+ *     @param[in,out]   *S3NBPtr - Pointer to the S3_MEM_NB_BLOCK
+ *     @param[in]       NodeID - The Node id of the target die
+ *
+ *     @return         BOOLEAN
+ *                         TRUE - This is the correct constructor for the targeted node.
+ *                         FALSE - This isn't the correct constructor for the targeted node.
+ */
+BOOLEAN
+MemNS3ResumeClientNb (
+  IN OUT   S3_MEM_NB_BLOCK *S3NBPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 DCT;
+  MEM_NB_BLOCK *NBPtr;
+  MEM_DATA_STRUCT *MemPtr;
+
+  NBPtr = S3NBPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  // Errata before S3 resume sequence
+
+  // Add a hook here
+  AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader);
+  if (AgesaHookBeforeExitSelfRefresh (0, MemPtr) == AGESA_SUCCESS) {
+  }
+  AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader);
+
+  NBPtr->ChangeNbFrequencyWrap (NBPtr, 0);
+  //Override the NB Pstate if needed
+  IDS_OPTION_HOOK (IDS_NB_PSTATE_DIDVID, S3NBPtr->NBPtr, &MemPtr->StdHeader);
+  // Set F2x[1,0]90[ExitSelfRef]
+  // Wait for F2x[1,0]90[ExitSelfRef]=0
+  for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+    MemNSwitchDCTNb (NBPtr, DCT);
+    if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) {
+      MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1);
+      MemNSetBitFieldNb (NBPtr, BFExitSelfRef, 1);
+      while (MemNGetBitFieldNb (NBPtr, BFExitSelfRef) != 0) {}
+      MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0);
+    }
+  }
+
+  // Errata After S3 resume sequence
+  return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function executes the S3 resume for a node on a UNB
+ *
+ *     @param[in,out]   *S3NBPtr - Pointer to the S3_MEM_NB_BLOCK
+ *     @param[in]       NodeID - The Node id of the target die
+ *
+ *     @return         BOOLEAN
+ *                         TRUE - This is the correct constructor for the targeted node.
+ *                         FALSE - This isn't the correct constructor for the targeted node.
+ */
+BOOLEAN
+MemNS3ResumeUNb (
+  IN OUT   S3_MEM_NB_BLOCK *S3NBPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 DCT;
+  MEM_NB_BLOCK *NBPtr;
+  MEM_DATA_STRUCT *MemPtr;
+
+  NBPtr = S3NBPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  // Errata before S3 resume sequence
+
+  // Add a hook here
+  AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader);
+  if (AgesaHookBeforeExitSelfRefresh (0, MemPtr) == AGESA_SUCCESS) {
+  }
+  AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader);
+
+  //Override the NB Pstate if needed
+  IDS_OPTION_HOOK (IDS_NB_PSTATE_DIDVID, S3NBPtr->NBPtr, &MemPtr->StdHeader);
+  // Set F2x[1,0]90[ExitSelfRef]
+  // Wait for F2x[1,0]90[ExitSelfRef]=0
+  for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+    MemNSwitchDCTNb (NBPtr, DCT);
+    if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) {
+      MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1);
+      MemNSetBitFieldNb (NBPtr, BFExitSelfRef, 1);
+      while (MemNGetBitFieldNb (NBPtr, BFExitSelfRef) != 0) {}
+      if (NBPtr->IsSupported[SetDllShutDown]) {
+        MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0);
+      }
+    }
+  }
+
+  // Errata After S3 resume sequence
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns the conditional PCI device mask
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in, out]  *DescriptPtr - Pointer to DESCRIPTOR_GROUP
+ *      @return         none
+ */
+VOID
+MemNS3GetConPCIMaskNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  )
+{
+  BIT_FIELD_NAME bitfield;
+  UINT32 RegVal;
+  UINT8 DCT;
+  UINT8 DimmMask;
+  UINT8 BadDimmMask;
+  UINT8 DctGangEn;
+  BOOLEAN IsDDR3;
+
+  IsDDR3 = FALSE;
+  DimmMask = 0;
+  BadDimmMask = 0;
+  for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+    NBPtr->SwitchDCT (NBPtr, DCT);
+    if (MemNGetBitFieldNb (NBPtr, BFMemClkFreqVal)) {
+      if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode) == 1) {
+        IsDDR3 = TRUE;
+      }
+      for (bitfield = BFCSBaseAddr0Reg; bitfield <= BFCSBaseAddr7Reg; bitfield ++) {
+        RegVal = MemNGetBitFieldNb (NBPtr, bitfield);
+        if (RegVal & 0x3) {
+          DimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT));
+        } else if (RegVal & 0x4) {
+          BadDimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT));
+        }
+      }
+    }
+  }
+
+  NBPtr->SwitchDCT (NBPtr, 0);
+  DctGangEn = (UINT8) MemNGetBitFieldNb (NBPtr, BFDctGangEn);
+  // Set channel mask
+  DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = 0;
+  DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = 0;
+  for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+    if (DimmMask & (0x55 << DCT)) {
+      // Set mask before exit self refresh
+      DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 1 << DCT;
+      // Set mask after exit self refresh
+      DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= 1 << DCT;
+      // Set DDR3 mask if Dimms present are DDR3
+      if (IsDDR3) {
+        DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= (DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 << 4);
+      }
+    } else if (BadDimmMask & (0x55 << DCT)) {
+      // Need to save function 2 registers for bad dimm
+      DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 1 << DCT;
+    }
+  }
+
+  // Set dimm mask
+  DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = DimmMask;
+  DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = DimmMask;
+  if (DctGangEn) {
+    // Need to set channel mask bit to 1 on DCT1 in ganged mode as some registers
+    // need to be restored on both channels in ganged mode
+    DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 2;
+    DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= 2;
+    if (IsDDR3) {
+      DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= (2 << 4);
+      DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= (2 << 4);
+    }
+    // Before exit self refresh, do not copy dimm mask to DCT1 as registers restored
+    // in that time frame don't care about individual dimm population. We want to
+    // skip registers that are not needed to be restored for DCT1 in ganged mode.
+    //
+    // After exit self refresh, training registers will be restored and will only be
+    // restored for slots which have dimms on it. So dimm mask needs to be copied to DCT1.
+    //
+    DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 |= DimmMask << 1;
+  }
+
+  // Adjust the mask if there is no dimm on the node
+  if ((DescriptPtr->CPCIDevice[PRESELFREF].Mask2 == 0) &&
+    (DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 == 0)) {
+    DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK;
+    DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns the conditional PCI device mask
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in, out]  *DescriptPtr - Pointer to DESCRIPTOR_GROUP
+ *      @return         none
+ */
+VOID
+MemNS3GetConPCIMaskUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  )
+{
+  BIT_FIELD_NAME bitfield;
+  UINT32 RegVal;
+  UINT8 DCT;
+  UINT8 DimmMask;
+  UINT8 BadDimmMask;
+  UINT8 NbPsCap;
+
+  DimmMask = 0;
+  BadDimmMask = 0;
+  for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+    MemNSwitchDCTNb (NBPtr, DCT);
+    if (MemNGetBitFieldNb (NBPtr, BFMemClkFreqVal)) {
+      for (bitfield = BFCSBaseAddr0Reg; bitfield <= BFCSBaseAddr7Reg; bitfield ++) {
+        RegVal = MemNGetBitFieldNb (NBPtr, bitfield);
+        if (RegVal & 0x1) {
+          DimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT));
+        } else if (RegVal & 0x4) {
+          BadDimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT));
+        }
+      }
+    }
+  }
+  // Check if the system is capable of doing NB Pstate change
+  NbPsCap = (UINT8) MemNGetBitFieldNb (NBPtr, BFNbPstateDis);
+
+  MemNSwitchDCTNb (NBPtr, 0);
+  // Set channel mask
+  DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = 0;
+  DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = 0;
+  for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+    if (DimmMask & (0x55 << DCT)) {
+      // Set mask before exit self refresh
+      DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= ((NbPsCap == 0) ? 5 : 1) << DCT;
+      // Set mask after exit self refresh
+      DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= 1 << DCT;
+      // Set DDR3 mask if Dimms present are DDR3
+      DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= (DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 << 4);
+    } else if (BadDimmMask & (0x55 << DCT)) {
+      // Need to save function 2 registers for bad dimm
+      DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 1 << DCT;
+    }
+  }
+
+  // Set dimm mask
+  DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = DimmMask;
+  DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = DimmMask;
+
+  // Adjust the mask if there is no dimm on the node
+  if ((DescriptPtr->CPCIDevice[PRESELFREF].Mask2 == 0) &&
+    (DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 == 0)) {
+    DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK;
+    DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function read the value of CSR register.
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in]  *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3GetCSRNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT32 ExtendOffset;
+  UINT32 ValueRead;
+  UINT8 DataPort;
+
+  ValueRead = 0;
+  ExtendOffset = Address.Address.Register;
+  if (ExtendOffset & 0x800) {
+    Address.Address.Register = 0xF0;
+    DataPort = 0xF4;
+  } else {
+    Address.Address.Register = 0x98;
+    DataPort = 0x9C;
+  }
+  if (ExtendOffset & 0x400) {
+    Address.Address.Register |= 0x100;
+  }
+  ExtendOffset &= 0x3FF;
+  LibAmdPciWrite (AccessS3SaveWidth32, Address, &ExtendOffset, ConfigPtr);
+  while (((ValueRead >> 31) & 1) == 0) {
+    LibAmdPciRead (AccessS3SaveWidth32, Address, &ValueRead, ConfigPtr);
+  }
+  Address.Address.Register = (Address.Address.Register & 0xF00) | DataPort;
+  LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function write to a CSR register
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3SetCSRNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT32 ExtendOffset;
+  UINT32 ValueRead;
+  UINT32 ValueWrite;
+  UINT8 DataOffset;
+
+  ValueRead = 0;
+  ExtendOffset = Address.Address.Register;
+  // Check the flag and see the type of the access
+  if (ExtendOffset & 0x800) {
+    Address.Address.Register = 0xF4;
+    DataOffset = 0xF0;
+  } else {
+    Address.Address.Register = 0x9C;
+    DataOffset = 0x98;
+  }
+  if (ExtendOffset & 0x400) {
+    Address.Address.Register |= 0x100;
+  }
+  ExtendOffset &= 0x3FF;
+  ExtendOffset |= 0x40000000;
+  switch (AccessWidth) {
+  case AccessS3SaveWidth8:
+    ValueWrite = *(UINT8 *) Value;
+    break;
+  case AccessS3SaveWidth16:
+    ValueWrite = *(UINT16 *) Value;
+    break;
+  case AccessS3SaveWidth32:
+    ValueWrite = *(UINT32 *) Value;
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+  LibAmdPciWrite (AccessS3SaveWidth32, Address, &ValueWrite, ConfigPtr);
+  Address.Address.Register = (Address.Address.Register & 0xF00) | DataOffset;
+  LibAmdPciWrite (AccessS3SaveWidth32, Address, &ExtendOffset, ConfigPtr);
+  while (((ValueRead >> 31) & 1) == 0) {
+    LibAmdPciRead (AccessS3SaveWidth32, Address, &ValueRead, ConfigPtr);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function reads register bitfield
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3GetBitFieldNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  MemNS3GetSetBitField (AccessWidth, Address, FALSE, Value, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function writes register bitfield
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3SetBitFieldNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  MemNS3GetSetBitField (AccessWidth, Address, TRUE, Value, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function restores scrubber base register
+ *
+ *     @param[in,out]   *NBPtr - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Node - The Node id of the target die
+ *
+ */
+VOID
+MemNS3RestoreScrubNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Node
+  )
+{
+  UINT32 ScrubAddrRJ16;
+
+  ScrubAddrRJ16 = (MemNGetBitFieldNb (NBPtr, BFDramBaseReg0 + Node) & 0xFFFF0000) >> 8;
+  ScrubAddrRJ16 |= MemNGetBitFieldNb (NBPtr, BFDramBaseHiReg0 + Node) << 24;
+  MemNSetBitFieldNb (NBPtr, BFScrubAddrLoReg, ScrubAddrRJ16 << 16);
+  MemNSetBitFieldNb (NBPtr, BFScrubAddrHiReg, ScrubAddrRJ16 >> 16);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function disable NB Pstate Debug.
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3DisNbPsDbgNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT32 RegValue;
+
+  LibAmdPciRead (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr);
+  // Clear NbPsDbgEn and NbPsCsrAccSel
+  if ((RegValue & 0xC0000000) != 0) {
+    RegValue &= 0x3FFFFFFF;
+    LibAmdPciWrite (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function that enable NB Pstate debug register to allow access to NB Pstate
+ *   1 registers without actually changing NB Pstate.
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3EnNbPsDbg1Nb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT32 RegValue;
+
+  LibAmdPciRead (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr);
+  // Set NbPsDbgEn to 1 and NbPsCsrAccSel to 1
+  if ((RegValue & 0xC0000000) != 0xC0000000) {
+    RegValue = (*(UINT32 *)Value & 0x3FFFFFFF) | 0xC0000000;
+    LibAmdPciWrite (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets bit 31 [DynModeChange] of F2x9C_xB
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3SetDynModeChangeNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT32 RegValue;
+
+  RegValue = 0x80000000;
+  IDS_SKIP_HOOK (IDS_BEFORE_S3_SPECIAL, &Address, ConfigPtr) {
+    MemNS3SetCSRNb (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function does the channel disable sequence
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3DisableChannelNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  MEM_NB_BLOCK *NBPtr;
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+  UINT32 RegValue;
+  UINT8 Die;
+
+  // See which Node should be accessed
+  Die = (UINT8) (Address.Address.Device - 24);
+
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+    S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+    NBPtr = S3NBPtr[Die].NBPtr;
+
+    // Function field contains the DCT number
+    NBPtr->SwitchDCT (NBPtr, (UINT8) Address.Address.Function);
+    RegValue = MemNGetBitFieldNb (NBPtr, BFCKETri);
+    // if CKETri is 0b11, this channel is disabled
+    if (RegValue == 3) {
+      //Wait for 24 MEMCLKs, which is 60ns under 400MHz
+      MemFS3Wait10ns (6, NBPtr->MemPtr);
+      MemNSetBitFieldNb (NBPtr, BFMemClkDis, 0xFF);
+      MemNSetBitFieldNb (NBPtr, BFDisDramInterface, 1);
+      MemNSetBitFieldNb (NBPtr, BFDramPhyStatusReg, 0x80800000);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function disables auto compensation.
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3SetDisAutoCompUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT16 RegValue;
+
+  MemNS3GetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr);
+  RegValue = 0x6000 | RegValue;
+  MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function retores Pre Driver Calibration with pre driver calibration code
+ *   code valid bit set.
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3SetPreDriverCalUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT16 RegValue;
+
+  RegValue = 0x8000 | *(UINT16 *) Value;
+  MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is used by families that use a separate DctCfgSel bit to
+ *     select the current DCT which will be accessed by function 2.
+ *     NOTE:  This function must be called BEFORE the NBPtr->Dct variable is
+ *     updated.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *Dct     - Pointer to ID of the target DCT
+ *
+ */
+
+BOOLEAN
+MemNS3DctCfgSelectUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       VOID *Dct
+  )
+{
+  // Set the DctCfgSel to new DCT
+  //
+  MemNSetBitFieldNb (NBPtr, BFDctCfgSel, *(UINT8*)Dct);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function write to a register that has one copy for each NB Pstate
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3GetNBPStateDepRegUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT8 NBPstate;
+  UINT8 TempValue;
+  UINT8 Dct;
+  UINT32 Temp;
+
+  Temp = Address.Address.Register;
+  NBPstate = (UINT8) (Temp >> 10);
+  Dct = (UINT8) Address.Address.Function;
+  Temp &= 0x3FF;
+
+  // Switch Dct
+  // Function field contains DCT value
+  Address.Address.Function = FUNC_1;
+  Address.Address.Register = 0x10C;
+  LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+  TempValue = (TempValue & 0xCE) | ((NBPstate << 4) | Dct);
+  LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+
+  Address.Address.Function = FUNC_2;
+  Address.Address.Register = Temp;
+  LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr);
+
+  Address.Address.Function = FUNC_1;
+  Address.Address.Register = 0x10C;
+  TempValue = 0;
+  LibAmdPciWrite (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function write to a register that has one copy for each NB Pstate
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3SetNBPStateDepRegUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT8 NBPstate;
+  UINT8 TempValue;
+  UINT8 Dct;
+  UINT32 Temp;
+
+  Temp = Address.Address.Register;
+  NBPstate = (UINT8) (Temp >> 10);
+  Dct = (UINT8) Address.Address.Function;
+  Temp &= 0x3FF;
+
+  // Switch Dct
+  // Function field contains DCT value
+  Address.Address.Function = FUNC_1;
+  Address.Address.Register = 0x10C;
+  LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+  TempValue = (TempValue & 0xCE) | ((NBPstate << 4) | Dct);
+  LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+
+  Address.Address.Function = FUNC_2;
+  Address.Address.Register = Temp;
+  LibAmdPciWrite (AccessWidth, Address, Value, ConfigPtr);
+
+  Address.Address.Function = FUNC_1;
+  Address.Address.Register = 0x10C;
+  TempValue = 0;
+  LibAmdPciWrite (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function read the value of Function 2 PCI register.
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the NB register in PCI_ADDR format.
+ *     @param[in]  *Value - Pointer to the value be read.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3SaveNBRegiserUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT8 TempValue;
+  UINT8 Dct;
+  UINT32 Temp;
+
+  Temp = Address.Address.Register;
+  Dct = (UINT8) Address.Address.Function;
+
+  // Switch Dct
+  // Function field contains DCT value
+  Address.Address.Function = FUNC_1;
+  Address.Address.Register = 0x10C;
+  LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+  TempValue = (TempValue & 0xFE) | Dct;
+  LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+
+  Address.Address.Register = Temp;
+  Address.Address.Function = FUNC_2;
+  LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function set the value of Function 2 PCI register.
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the NB register in PCI_ADDR format.
+ *     @param[in]  *Value - Pointer to the value be write.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3RestoreNBRegiserUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT8 TempValue;
+  UINT8 Dct;
+  UINT32 Temp;
+
+  Temp = Address.Address.Register;
+  Dct = (UINT8) Address.Address.Function;
+
+  // Switch Dct
+  // Function field contains DCT value
+  Address.Address.Function = FUNC_1;
+  Address.Address.Register = 0x10C;
+  LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+  TempValue = (TempValue & 0xFE) | Dct;
+  LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+
+  Address.Address.Register = Temp;
+  Address.Address.Function = FUNC_2;
+  LibAmdPciWrite (AccessWidth, Address, Value, ConfigPtr);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function reads and writes register bitfield
+ *
+ *     @param[in]   AccessWidth - Access width of the register
+ *     @param[in]   Address - address of the CSR register in PCI_ADDR format.
+ *     @param[in]   IsSet - if this is a register read or write
+ *     @param[in, out]  *Value - Pointer to the value be read or  written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+STATIC
+MemNS3GetSetBitField (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       BOOLEAN IsSet,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  BIT_FIELD_NAME BitField;
+  MEM_NB_BLOCK *NBPtr;
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+  UINT32 RegValue;
+  UINT8 Die;
+
+  RegValue = 0;
+  // See which Node should be accessed
+  Die = (UINT8) (Address.Address.Device - 24);
+
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+    S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+    NBPtr = S3NBPtr[Die].NBPtr;
+
+    // Function field contains the DCT number
+    NBPtr->SwitchDCT (NBPtr, (UINT8) Address.Address.Function);
+
+    // Get the bitfield name to be accessed
+    // Register field contains the bitfield name
+    BitField = (BIT_FIELD_NAME) Address.Address.Register;
+
+    if (IsSet) {
+      switch (AccessWidth) {
+      case AccessS3SaveWidth8:
+        RegValue = *(UINT8 *) Value;
+        break;
+      case AccessS3SaveWidth16:
+        RegValue = *(UINT16 *) Value;
+        break;
+      case AccessS3SaveWidth32:
+        RegValue = *(UINT32 *) Value;
+        break;
+      default:
+        ASSERT (FALSE);
+      }
+      MemNSetBitFieldNb (NBPtr, BitField, RegValue);
+    } else {
+      RegValue = MemNGetBitFieldNb (NBPtr, BitField);
+
+      switch (AccessWidth) {
+      case AccessS3SaveWidth8:
+        *(UINT8 *) Value = (UINT8) RegValue;
+        break;
+      case AccessS3SaveWidth16:
+        *(UINT16 *) Value = (UINT16) RegValue;
+        break;
+      case AccessS3SaveWidth32:
+        *(UINT32 *) Value = RegValue;
+        break;
+      default:
+        ASSERT (FALSE);
+      }
+    }
+  } else {
+    ASSERT (FALSE);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the dummy read address for a channel of a node.
+ *
+ *     @param[in, out]  *NBPtr - Pointer to northbridge block
+ *     @param[out]      *TestAddr - Pointer to the test address
+ *
+ *     @retval           TRUE - Dummy read address can be found
+ *     @retval           FALSE - Dummy read address cannot be found
+ *
+ */
+BOOLEAN
+STATIC
+MemNS3GetDummyReadAddr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+     OUT   UINT64 *TestAddr
+  )
+{
+  BOOLEAN DctSelIntlvEn;
+  UINT8 DramIntlvEn;
+  UINT8 DctSelIntlvAddr;
+  UINT8 IntLvRgnBaseAddr;
+  UINT8 IntLvRgnLmtAddr;
+  UINT8 IntLvRgnSize;
+  UINT32 DctSelBaseAddr;
+  UINT64 TOM;
+  BOOLEAN AddrFound;
+
+  AddrFound = TRUE;
+  // Check if Node interleaving is enabled
+  DramIntlvEn = (UINT8) MemNGetBitFieldNb (NBPtr, BFDramIntlvEn);
+  if (DramIntlvEn != 0) {
+    // Set the address bits that identify the node
+    *TestAddr = (UINT64) MemNGetBitFieldNb (NBPtr, BFDramIntlvSel) << 12;
+  } else {
+    *TestAddr = (UINT64) MemNGetBitFieldNb (NBPtr, BFDramBaseAddr) << 27;
+  }
+
+  // Check if channel interleaving is enabled
+  DctSelIntlvEn = (BOOLEAN) MemNGetBitFieldNb (NBPtr, BFDctSelIntLvEn);
+  DctSelBaseAddr = MemNGetBitFieldNb (NBPtr, BFDctSelBaseAddr);
+  if (!DctSelIntlvEn) {
+    if ((NBPtr->Dct == 1) && ((UINT8) MemNGetBitFieldNb (NBPtr, BFDctSelHi) == 1)) {
+      *TestAddr = ((UINT64) DctSelBaseAddr << 27) | (*TestAddr & 0xFFFFFFF);
+    }
+  } else {
+    DctSelIntlvAddr = (UINT8) MemNGetBitFieldNb (NBPtr, BFDctSelIntLvAddr);
+    // Set the address bits that identify the channel
+    if ((DctSelIntlvAddr == 0) || (DctSelIntlvAddr == 2)) {
+      *TestAddr |= (UINT64) NBPtr->Dct << 6;
+    } else if (DctSelIntlvAddr == 1) {
+      *TestAddr |= (UINT64) NBPtr->Dct << (12 + LibAmdBitScanReverse (DramIntlvEn + 1));
+    } else if (DctSelIntlvAddr == 3) {
+      *TestAddr |= (UINT64) NBPtr->Dct << 9;
+    }
+  }
+  // Adding 2M to avoid conflict
+  *TestAddr += 0x200000;
+
+  // If memory hoisting is disabled, the address can fall into MMIO area
+  // Need to find an address out of MMIO area but belongs to the channel
+  // If the whole channel is in MMIO, then do not do dummy read.
+  //
+  LibAmdMsrRead (TOP_MEM, &TOM, &NBPtr->MemPtr->StdHeader);
+  if ((*TestAddr >= TOM) && (*TestAddr < ((UINT64) _4GB_RJ16 << 16))) {
+    if ((NBPtr->Dct == 1) && ((UINT8) MemNGetBitFieldNb (NBPtr, BFDctSelHi) == 1)) {
+      // This is the DCT that goes to high address range
+      if (DctSelBaseAddr >= (_4GB_RJ16 >> (27 - 16))) {
+        // When DctSelBaseAddr is higher than 4G, choose DctSelBaseAddr as the dummy read addr
+        if (DctSelIntlvEn) {
+          *TestAddr = ((UINT64) DctSelBaseAddr << 27) | (*TestAddr & 0xFFFFFFF);
+        }
+      } else if (MemNGetBitFieldNb (NBPtr, BFDramLimitAddr) > (UINT32) (_4GB_RJ16 >> (27 - 16))) {
+        // if DctSelBase is smaller than 4G, but Dram limit is larger than 4G, then choose 4G as
+        // dummy read address
+        *TestAddr =  ((UINT64) _4GB_RJ16 << 16) | (*TestAddr & 0xFFFFFF);
+      } else {
+        AddrFound = FALSE;
+      }
+    } else {
+      // This is the DCT that only goes to low address range
+      if (DctSelBaseAddr > (_4GB_RJ16 >> (27 - 16))) {
+        // When DctSelBaseAddr is larger than 4G, choose 4G as the dummy read address
+        // Keep the lower bits for node and channel selection
+        *TestAddr = ((UINT64) _4GB_RJ16 << 16) | (*TestAddr & 0xFFFFFF);
+      } else {
+        AddrFound = FALSE;
+      }
+    }
+  }
+
+  // Interleaved Swap Region handling
+  if ((BOOLEAN) MemNGetBitFieldNb (NBPtr, BFIntLvRgnSwapEn)) {
+    IntLvRgnBaseAddr = (UINT8) MemNGetBitFieldNb (NBPtr, BFIntLvRgnBaseAddr);
+    IntLvRgnLmtAddr = (UINT8) MemNGetBitFieldNb (NBPtr, BFIntLvRgnLmtAddr);
+    IntLvRgnSize = (UINT8) MemNGetBitFieldNb (NBPtr, BFIntLvRgnSize);
+    ASSERT (IntLvRgnSize == (IntLvRgnLmtAddr - IntLvRgnBaseAddr + 1));
+    if (((*TestAddr >> 34) == 0) &&
+      ((((*TestAddr >> 27) >= IntLvRgnBaseAddr) && ((*TestAddr >> 27) <= IntLvRgnLmtAddr))
+       || ((*TestAddr >> 27) < IntLvRgnSize))) {
+      *TestAddr ^= (UINT64) IntLvRgnBaseAddr << 27;
+    }
+  }
+
+  return AddrFound;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets bit 7 [MemClkFreqVal] of F2x94_dct[1:0]
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3SetMemClkFreqValUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT32 TempValue;
+
+  // 1. Program F2x94_dct[1:0][MemClkFreqVal] = 1
+  MemNS3SaveNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr);
+  TempValue |= 0x80;
+  MemNS3RestoreNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr);
+
+  // 2. Wait for F2x94_dct[1:0][FreqChgInPrg] = 0
+  MemNS3SaveNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr);
+  while ((TempValue & 0x200000) != 0) {
+    MemNS3SaveNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     This function changes memory Pstate context
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format. Target MemPState is in
+ *                            Address.Address.Register.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNS3ChangeMemPStateContextNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  MEM_NB_BLOCK *NBPtr;
+  LOCATE_HEAP_PTR LocateBufferPtr;
+  S3_MEM_NB_BLOCK *S3NBPtr;
+  UINT8 Die;
+
+  // See which Node should be accessed
+  Die = (UINT8) (Address.Address.Device - 24);
+
+  LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+  if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+    S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+    NBPtr = S3NBPtr[Die].NBPtr;
+    MemNChangeMemPStateContextNb (NBPtr, Address.Address.Register);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function retores Phy Clk DLL fine delay
+ *
+ *     @param[in]   AccessWidth - Access width of the register.
+ *     @param[in]   Address - address in PCI_ADDR format.
+ *     @param[in, out]  *Value - Pointer to the value to be written.
+ *     @param[in, out]  *ConfigPtr - Pointer to Config handle.
+ *     @return         none
+ */
+VOID
+MemNS3SetPhyClkDllFineClientNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  )
+{
+  UINT16 RegValue;
+
+  RegValue = 0x4000 | *(UINT16 *) Value;
+  MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr);
+  RegValue = 0xBFFF & *(UINT16 *) Value;
+  MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mndct.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mndct.c
new file mode 100644
index 0000000000..666e7fd289
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mndct.c
@@ -0,0 +1,3453 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mndct.c
+ *
+ * Common Northbridge DCT support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 60556 $ @e \$Date: 2011-10-17 20:19:58 -0600 (Mon, 17 Oct 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "mftds.h"
+#include "merrhdl.h"
+#include "cpuFamilyTranslation.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_MNDCT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemNAfterStitchMemNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT8
+MemNGet1KTFawTkNb (
+  IN       UINT8 k
+  );
+
+UINT8
+MemNGet2KTFawTkNb (
+  IN       UINT8 k
+  );
+
+VOID
+STATIC
+MemNQuarterMemClk2NClkNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   UINT16 *SubTotalPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function combines all the memory into a contiguous map.
+ *      Requires that Mask values for each bank be programmed first and that
+ *      the chip-select population indicator is correctly set.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_FATAL may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ */
+
+BOOLEAN
+MemNStitchMemoryNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN DSpareEn;
+  UINT32 NxtCSBase;
+  UINT32 CurCSBase;
+  UINT32 CsSize;
+  UINT32 BiggestBank;
+  UINT8 p;
+  UINT8 q;
+  UINT8 BiggestDimm;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  DSpareEn = FALSE;
+  if (NBPtr->IsSupported[SetSpareEn]) {
+    DSpareEn = FALSE;
+    if (RefPtr->GStatus[GsbEnDIMMSpareNW]) {
+      DSpareEn = TRUE;
+    }
+  }
+
+  DCTPtr->Timings.CsEnabled = 0;
+  NxtCSBase = 0;
+  for (p = 0; p < MAX_CS_PER_CHANNEL; p++) {
+    BiggestBank = 0;
+    BiggestDimm = 0;
+    for (q = 0; q < MAX_CS_PER_CHANNEL; q++) {
+      if (((DCTPtr->Timings.CsPresent & ~DCTPtr->Timings.CsTestFail) & ((UINT16)1 << q)) != 0) {
+        if ((MemNGetBitFieldNb (NBPtr, BFCSBaseAddr0Reg + q) & 7) == 0) {
+          // (CSEnable|Spare==1)bank is not enabled yet
+          CsSize = MemNGetBitFieldNb (NBPtr, BFCSMask0Reg + (q >> 1));
+          if (CsSize != 0) {
+            CsSize += ((UINT32)1 << 19);
+            CsSize &= 0xFFF80000;
+          }
+          if (CsSize > BiggestBank) {
+            BiggestBank = CsSize;
+            BiggestDimm = q;
+          }
+        }
+      }
+    }
+
+    if (BiggestBank != 0) {
+      CurCSBase = NxtCSBase;
+      if (NBPtr->IsSupported[CheckSpareEn]) {
+        if (DSpareEn) {
+          CurCSBase = ((UINT32)1 << BFSpare);
+          DSpareEn = FALSE;
+        } else {
+          CurCSBase |= ((UINT32)1 << BFCSEnable);
+          NxtCSBase += BiggestBank;
+        }
+      } else {
+        CurCSBase |= ((UINT32)1 << BFCSEnable);
+        NxtCSBase += BiggestBank;
+      }
+      if ((BiggestDimm & 1) != 0) {
+        if (!(MCTPtr->Status[SbLrdimms])) {
+          // For LRDIMMS, On Dimm Mirroring is enabled after SDI
+          if ((DCTPtr->Timings.DimmMirrorPresent & (1 << (BiggestDimm >> 1))) != 0) {
+            CurCSBase |= ((UINT32)1 << BFOnDimmMirror);
+          }
+        }
+      }
+      MemNSetBitFieldNb (NBPtr, BFCSBaseAddr0Reg + BiggestDimm, CurCSBase);
+      DCTPtr->Timings.CsEnabled |= (1 << BiggestDimm);
+    }
+    if ((DCTPtr->Timings.CsTestFail & ((UINT16)1 << p)) != 0) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "Node %d Dct %d exclude CS %d\n", NBPtr->Node, NBPtr->Dct, p);
+      MemNSetBitFieldNb (NBPtr, (BFCSBaseAddr0Reg + p), (UINT32)1 << BFTestFail);
+    }
+  }
+
+  if (NxtCSBase != 0) {
+    DCTPtr->Timings.DctMemSize = NxtCSBase >> 8;    // Scale base address from [39:8] to [47:16]
+    MemNAfterStitchMemNb (NBPtr);
+  }
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets platform specific config/timing values from the interface layer and
+ *   programs them into DCT.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_FATAL may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ */
+
+BOOLEAN
+MemNPlatformSpecNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST BIT_FIELD_NAME ChipletPDRegs[] = {
+  BFPhyClkConfig0,
+  BFPhyClkConfig3,
+  BFPhyClkConfig1,
+  BFPhyClkConfig2
+  };
+  CONST UINT8 ChipletPDClkDisMap[][2] = {
+  //F2[1, 0]x9C_x0D0F2030 -> F2x[1, 0]88[MemClkDis[1:0]]
+  {0, 1},
+  //F2[1, 0]x9C_x0D0F2330 -> F2x[1, 0]88[MemClkDis[7:6]]
+  {6, 7},
+  //F2x09C_x0D0F2130 -> F2x88[MemClkDis[5:4]]
+  {4, 5},
+  //F2x09C_x0D0F2230 -> F2x88[MemClkDis[3:2]]
+  {2, 3},
+  //F2x19C_x0D0F2130 -> F2x188[MemClkDis[5:2]]
+  {2, 5},
+  //F2x19C_x0D0F2230 -> F2x188[MemClkDis[4:3]]
+  {3, 4}
+  };
+
+  UINT8 MemClkDis;
+  UINT8 i;
+  UINT8 MemoryAllClocks;
+  UINT8 *MemClkDisMap;
+  UINT16 CsPresent;
+  UINT8 RegIndex;
+  UINT8 Cs1;
+  UINT8 Cs2;
+
+  if (!MemNGetPlatformCfgNb (NBPtr)) {
+    IDS_ERROR_TRAP;
+  }
+
+  if (!NBPtr->PsPtr->MemPDoPs (NBPtr)) {
+    IDS_ERROR_TRAP;
+  }
+  MemNProgramPlatformSpecNb (NBPtr);
+
+  MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_ODT, ALL_DIMMS);
+
+  if (NBPtr->MCTPtr->GangedMode) {
+    MemNSwitchDCTNb (NBPtr, 1);
+    if (!MemNGetPlatformCfgNb (NBPtr)) {
+      IDS_ERROR_TRAP;
+    }
+    MemNProgramPlatformSpecNb (NBPtr);
+    MemNSwitchDCTNb (NBPtr, 0);
+  }
+
+  //======================================================================
+  // Disable unused MemClk to save power
+  //======================================================================
+  //
+  MemClkDis = 0;
+  MemoryAllClocks = UserOptions.CfgMemoryAllClocksOn;
+  IDS_OPTION_HOOK (IDS_ALL_MEMORY_CLOCK, &MemoryAllClocks, &(NBPtr->MemPtr->StdHeader));
+  if (!MemoryAllClocks) {
+    // Special Jedec SPD diagnostic bit - "enable all clocks"
+    if (!NBPtr->MCTPtr->Status[SbDiagClks]) {
+      MemClkDisMap = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MEMCLK_DIS, NBPtr->MCTPtr->SocketId, MemNGetSocketRelativeChannelNb (NBPtr, NBPtr->Dct, 0), 0,
+                                          &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+      if (MemClkDisMap == NULL) {
+        MemClkDisMap = NBPtr->ChannelPtr->MemClkDisMap;
+      }
+
+      // Turn off the unused CS clocks
+      CsPresent = NBPtr->DCTPtr->Timings.CsPresent;
+
+      if (NBPtr->IsSupported[CheckMemClkCSPresent]) {
+        if (NBPtr->ChannelPtr->RegDimmPresent != 0) {
+          // All DDR3 RDIMM use only one MEMCLOCK from edge finger to the register
+          // regardless of how many Ranks are on the DIMM (Single, Dual or Quad)
+          CsPresent = (CsPresent | (CsPresent >> 1)) & 0x5555;
+        }
+      }
+      for (i = 0; i < 8; i++) {
+        if ((CsPresent & MemClkDisMap[i]) == 0) {
+          MemClkDis |= (UINT8) (1 << i);
+        }
+      }
+      //Chiplet power down
+      for (RegIndex = 0; RegIndex < GET_SIZE_OF (ChipletPDRegs); RegIndex++) {
+        if ((NBPtr->Dct == 1) && (RegIndex >= 2)) {
+          Cs1 =  MemClkDisMap[ChipletPDClkDisMap[RegIndex + 2][0]];
+          Cs2 =  MemClkDisMap[ChipletPDClkDisMap[RegIndex + 2][1]];
+        } else {
+          Cs1 =  MemClkDisMap[ChipletPDClkDisMap[RegIndex][0]];
+          Cs2 =  MemClkDisMap[ChipletPDClkDisMap[RegIndex][1]];
+        }
+        if ((CsPresent & (UINT16) (Cs1 | Cs2)) == 0) {
+          MemNSetBitFieldNb (NBPtr, ChipletPDRegs[RegIndex], (MemNGetBitFieldNb (NBPtr, ChipletPDRegs[RegIndex]) | 0x10));
+        }
+      }
+    }
+  }
+  MemNSetBitFieldNb (NBPtr, BFMemClkDis, MemClkDis);
+
+  AGESA_TESTPOINT (TPProcMemPhyCompensation, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->MemNInitPhyComp (NBPtr);
+
+  MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_SLEWRATE, ALL_DIMMS);
+
+  // Program DramTerm for DDR2
+  if ((MemNGetBitFieldNb (NBPtr, BFDdr3Mode)) == 0) {
+    MemNSetBitFieldNb (NBPtr, BFDramTerm, NBPtr->PsPtr->DramTerm);
+  } else {
+    // Dynamic Dynamic DramTerm for DDR3
+    // Dram Term for DDR3 may vary based on chip selects
+    MemNSetBitFieldNb (NBPtr, BFDramTermDyn, NBPtr->PsPtr->DynamicDramTerm);
+  }
+
+  MemFInitTableDrive (NBPtr, MTAfterPlatformSpec);
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets platform specific config/timing values from the interface layer and
+ *   programs them into DCT.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_FATAL may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ */
+
+BOOLEAN
+MemNPlatformSpecUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 MemClkDis;
+  UINT8 i;
+  UINT8 MemoryAllClocks;
+  UINT8 *MemClkDisMap;
+  UINT16 CsPresent;
+
+  if (!MemNGetPlatformCfgNb (NBPtr)) {
+    IDS_ERROR_TRAP;
+  }
+
+  if (!NBPtr->PsPtr->MemPDoPs (NBPtr)) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\tDisable DCT%d due to unsupported DIMM configuration\n", NBPtr->Dct);
+    if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+      ASSERT (FALSE);
+    }
+    NBPtr->DisableDCT (NBPtr);
+  } else {
+
+    MemNProgramPlatformSpecNb (NBPtr);
+    MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_ODT, ALL_DIMMS);
+
+    //======================================================================
+    // Disable unused MemClk to save power
+    //======================================================================
+    //
+    MemClkDis = 0;
+    MemoryAllClocks = UserOptions.CfgMemoryAllClocksOn;
+    IDS_OPTION_HOOK (IDS_ALL_MEMORY_CLOCK, &MemoryAllClocks, &(NBPtr->MemPtr->StdHeader));
+    if (!MemoryAllClocks) {
+      // Special Jedec SPD diagnostic bit - "enable all clocks"
+      if (!NBPtr->MCTPtr->Status[SbDiagClks]) {
+        MemClkDisMap = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MEMCLK_DIS, NBPtr->MCTPtr->SocketId, NBPtr->Dct, 0,
+                                            &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+        if (MemClkDisMap == NULL) {
+          MemClkDisMap = NBPtr->ChannelPtr->MemClkDisMap;
+        }
+
+        // Turn off unused clocks
+        CsPresent = NBPtr->DCTPtr->Timings.CsPresent;
+
+        for (i = 0; i < 8; i++) {
+          if ((CsPresent & MemClkDisMap[i]) == 0) {
+            MemClkDis |= (UINT8) (1 << i);
+          }
+        }
+
+        // Turn off unused chiplets
+        for (i = 0; i < 3; i++) {
+          if (((MemClkDis >> (i * 2)) & 0x3) == 0x3) {
+            MemNSetBitFieldNb (NBPtr, BFPhyClkConfig0 + i, 0x0010);
+          }
+        }
+      }
+    }
+    MemNSetBitFieldNb (NBPtr, BFMemClkDis, MemClkDis);
+    MemFInitTableDrive (NBPtr, MTAfterPlatformSpec);
+  }
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function disables the DCT and mem clock
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNDisableDCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSetBitFieldNb (NBPtr, BFCKETri, 0x03);
+  MemNSetBitFieldNb (NBPtr, BFODTTri, 0x0F);
+  MemNSetBitFieldNb (NBPtr, BFChipSelTri, 0xFF);
+
+  // To maximize power savings when DisDramInterface=1b,
+  // all of the MemClkDis bits should also be set.
+  //
+  MemNSetBitFieldNb (NBPtr, BFMemClkDis, 0xFF);
+  MemNSetBitFieldNb (NBPtr, BFDisDramInterface, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function disables the DCT and mem clock for client NB
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNDisableDCTClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSetBitFieldNb (NBPtr, BFCKETri, 0x03);
+  MemNSetBitFieldNb (NBPtr, BFODTTri, 0x0F);
+  MemNSetBitFieldNb (NBPtr, BFChipSelTri, 0xFF);
+
+  //Wait for 24 MEMCLKs
+  MemNWaitXMemClksNb (NBPtr, 24);
+
+  // To maximize power savings when DisDramInterface=1b,
+  // all of the MemClkDis bits should also be set.
+  //
+  MemNSetBitFieldNb (NBPtr, BFMemClkDis, 0xFF);
+
+  MemNSetBitFieldNb (NBPtr, BFDramPhyStatusReg, 0x80800000);
+
+  MemNSetBitFieldNb (NBPtr, BFDisDramInterface, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function disables the DCT and mem clock for UNB
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNDisableDCTUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSetBitFieldNb (NBPtr, BFExtendedParityEn, 0);
+  MemNSetBitFieldNb (NBPtr, BFParEn, 0);
+  MemNSetBitFieldNb (NBPtr, BFCKETri, 0x0F);
+
+  //Wait for 24 MEMCLKs
+  MemNWaitXMemClksNb (NBPtr, 24);
+
+  // To maximize power savings when DisDramInterface=1b,
+  // all of the MemClkDis bits should also be set.
+  //
+  MemNSetBitFieldNb (NBPtr, BFMemClkDis, 0xFF);
+
+  MemNSetBitFieldNb (NBPtr, BFDisDramInterface, 1);
+
+  if (NBPtr->Dct == 0) {
+    MemNSetBitFieldNb (NBPtr, BFPhyPSMasterChannel, 0x100);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *  This function initializes the DRAM devices on all DCTs at the same time
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNStartupDCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  // 1. Ensure F2x[1, 0]9C_x08[DisAutoComp] = 1.
+  // 2. BIOS waits 5 us for the disabling of the compensation engine to complete.
+  // DisAutoComp is still being set since InitPhyComp
+
+  if (NBPtr->MCTPtr->NodeMemSize != 0) {
+    // Init MemClk frequency
+    MemNBrdcstSetNb (NBPtr, BFMemClkFreqVal, 1);
+
+
+    AGESA_TESTPOINT (TpProcMemBeforeDramInit, &(NBPtr->MemPtr->StdHeader));
+    NBPtr->MemNBeforeDramInitNb (NBPtr);
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nMemClkFreq: %d MHz\n", NBPtr->DCTPtr->Timings.Speed);
+    AGESA_TESTPOINT (TpProcMemDramInit, &(NBPtr->MemPtr->StdHeader));
+    NBPtr->FeatPtr->DramInit (NBPtr->TechPtr);
+  }
+
+  // 7. Program F2x[1, 0]9C_x08[DisAutoComp] = 0.
+  // 8. BIOS must wait 750 us for the phy compensation engine
+  //    to reinitialize.
+  // DisAutoComp will be cleared after DramEnabled turns to 1
+
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *  This function initializes the DRAM devices on all DCTs at the same time
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNStartupDCTUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT16 FinalPllLockTime;
+
+  if (NBPtr->MCTPtr->NodeMemSize != 0) {
+    // Update NB frequency for startup DDR speed
+    NBPtr->ChangeNbFrequency (NBPtr);
+
+    if (NBPtr->FamilySpecificHook[ForcePhyToM0] (NBPtr, NULL)) {
+      // Program D18F2x[1,0]9C_x0000_000B = 80000000h. #109999.
+      MemNBrdcstSetNb (NBPtr, BFDramPhyStatusReg, 0x80000000);
+
+      // Program D18F2x[1,0]9C_x0D0F_E013[PllRegWaitTime] = 0118h. #194060.
+      MemNBrdcstSetNb (NBPtr, BFPllRegWaitTime, 0x118);
+    }
+
+    // Phy Voltage Level Programming
+    MemNPhyVoltageLevelNb (NBPtr);
+
+    // Run frequency change sequence
+    MemNBrdcstSetNb (NBPtr, BFPllLockTime, NBPtr->FreqChangeParam->PllLockTimeDefault);
+    MemNBrdcstSetNb (NBPtr, BFMemClkFreq, NBPtr->GetMemClkFreqId (NBPtr, NBPtr->DCTPtr->Timings.Speed));
+    NBPtr->FamilySpecificHook[SetSkewMemClk] (NBPtr, NULL);
+    NBPtr->ProgramNbPsDependentRegs (NBPtr);
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if ((NBPtr->DCTPtr->Timings.DctMemSize != 0)) {
+        MemNSetBitFieldNb (NBPtr, BFMemClkFreqVal, 1);
+        MemNPollBitFieldNb (NBPtr, BFFreqChgInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+      }
+    }
+    FinalPllLockTime = 0xF;
+    NBPtr->FamilySpecificHook[AfterMemClkFreqVal] (NBPtr, &FinalPllLockTime);
+    if (!NBPtr->IsSupported[CsrPhyPllPdEn]) {
+      // IF (D18F2x[1,0]9C_x0D0F_E00A[CsrPhySrPllPdMode]==0) THEN program
+      // D18F2x[1,0]9C_x0D0F_E006[PllLockTime] = 0Fh
+      MemNBrdcstSetNb (NBPtr, BFPllLockTime, FinalPllLockTime);
+    }
+
+    NBPtr->FamilySpecificHook[BeforePhyFenceTraining] (NBPtr, NBPtr);
+
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+
+        // Phy fence programming
+        AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+        NBPtr->PhyFenceTraining (NBPtr);
+
+        // Phy compensation initialization
+        AGESA_TESTPOINT (TPProcMemPhyCompensation, &(NBPtr->MemPtr->StdHeader));
+        NBPtr->MemNInitPhyComp (NBPtr);
+        MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_SLEWRATE, ALL_DIMMS);
+      }
+    }
+
+    AGESA_TESTPOINT (TpProcMemBeforeDramInit, &(NBPtr->MemPtr->StdHeader));
+    NBPtr->MemNBeforeDramInitNb (NBPtr);
+
+    AGESA_TESTPOINT (TpProcMemDramInit, &(NBPtr->MemPtr->StdHeader));
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nMemClkFreq: %d MHz\n", NBPtr->DCTPtr->Timings.Speed);
+    NBPtr->FeatPtr->DramInit (NBPtr->TechPtr);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * MemNChangeFrequencyHy:
+ *
+ *  This function change MemClk frequency to the value that is specified by DCTPtr->Timings.Speed
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNChangeFrequencyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  UINT8 Dct;
+  UINT8 ChipSel;
+
+  TechPtr = NBPtr->TechPtr;
+  if (NBPtr->IsSupported[CheckDisDllShutdownSR] && !(NBPtr->IsSupported[SetDllShutDown])) {
+    // #107421
+    MemNBrdcstSetNb (NBPtr, BFDisDllShutdownSR, 1);
+  }
+
+  //Program F2x[1,0]90[EnterSelfRefresh]=1.
+  //Wait until the hardware resets F2x[1,0]90[EnterSelfRefresh]=0.
+  MemNBrdcstSetNb (NBPtr, BFEnterSelfRef, 1);
+  MemNPollBitFieldNb (NBPtr, BFEnterSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+
+  //Program F2x9C_x08[DisAutoComp]=1
+  MemNSwitchDCTNb (NBPtr, 0);
+  MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 1);
+
+  //Program F2x[1, 0]94[MemClkFreqVal] = 0.
+  MemNBrdcstSetNb (NBPtr, BFMemClkFreqVal, 0);
+
+  //Program F2x[1, 0]94[MemClkFreq] to specify the target MEMCLK frequency.
+  MemNBrdcstSetNb (NBPtr, BFMemClkFreq, NBPtr->GetMemClkFreqId (NBPtr, NBPtr->DCTPtr->Timings.Speed));
+
+  IDS_OPTION_HOOK (IDS_BEFORE_MEM_FREQ_CHG, NBPtr, &(NBPtr->MemPtr->StdHeader));
+  //Program F2x[1, 0]94[MemClkFreqVal] = 1.
+  MemNBrdcstSetNb (NBPtr, BFMemClkFreqVal, 1);
+
+  //Wait until F2x[1, 0]94[FreqChgInProg]=0.
+  MemNPollBitFieldNb (NBPtr, BFFreqChgInProg, 0, PCI_ACCESS_TIMEOUT, TRUE);
+
+  if (NBPtr->IsSupported[CheckPhyFenceTraining]) {
+    //Perform Phy Fence retraining after frequency changed
+    AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+        AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+        MemNPhyFenceTrainingNb (NBPtr);
+      }
+    }
+  }
+
+  //Program F2x9C_x08[DisAutoComp]=0
+  MemNSwitchDCTNb (NBPtr, 0);
+  MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 0);
+
+  //Program F2x[1,0]90[ExitSelfRef]=1 for both DCTs.
+  //Wait until the hardware resets F2x[1, 0]90[ExitSelfRef]=0.
+  MemNBrdcstSetNb (NBPtr, BFExitSelfRef, 1);
+  MemNPollBitFieldNb (NBPtr, BFExitSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+
+  if (NBPtr->MCTPtr->Status[SbRegistered]) {
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        TechPtr->FreqChgCtrlWrd (TechPtr);
+      }
+    }
+  }
+
+  //wait for 500 MCLKs after ExitSelfRef, 500*2.5ns=1250ns
+  MemNWaitXMemClksNb (NBPtr, 500);
+
+  if (NBPtr->IsSupported[CheckDisDllShutdownSR] && !(NBPtr->IsSupported[SetDllShutDown])) {
+    // #107421
+    MemNBrdcstSetNb (NBPtr, BFDisDllShutdownSR, 0);
+  }
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+
+      //9.Configure the DCT to send initialization MR commands:
+      //  BIOS must reprogram Twr, Tcwl, and Tcl based on the new MEMCLK frequency.
+      //  Program F2x[1, 0]7C similar to step #2 in Pass 1 above for the new Dimm values.
+      TechPtr->AutoCycTiming (TechPtr);
+      if (!MemNPlatformSpecNb (NBPtr)) {
+        IDS_ERROR_TRAP;
+      }
+
+      for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+        if (NBPtr->IsSupported[CheckGetMCTSysAddr]) {
+          if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+            // if chip select present
+            TechPtr->SendAllMRCmds (TechPtr, ChipSel);
+            // NOTE: wait 512 clocks for DLL-relock
+            MemUWait10ns (50000, NBPtr->MemPtr);  // wait 500us
+          }
+        }
+        if (NBPtr->IsSupported[CheckSendAllMRCmds]) {
+          if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+
+            // if chip select present
+            TechPtr->SendAllMRCmds (TechPtr, ChipSel);
+          }
+        }
+      }
+      if ((NBPtr->DCTPtr->Timings.Speed == DDR1600_FREQUENCY) && (NBPtr->IsSupported[CheckDllSpeedUp])) {
+        MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F11, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D080F11) | 0x2000));
+        MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F10, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D080F10) | 0x2000));
+        MemNSetBitFieldNb (NBPtr, BFPhy0x0D088F30, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D088F30) | 0x2000));
+        MemNSetBitFieldNb (NBPtr, BFPhy0x0D08C030, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D08C030) | 0x2000));
+        if (Dct == 0) {
+          MemNSetBitFieldNb (NBPtr, BFPhy0x0D082F30, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D082F30) | 0x2000));
+        }
+        // NOTE: wait 512 clocks for DLL-relock
+        MemUWait10ns (50000, NBPtr->MemPtr);  // wait 500us
+      }
+    }
+  }
+  // Re-enable phy compensation since it had been disabled during InitPhyComp
+  MemNSwitchDCTNb (NBPtr, 0);
+  MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 0);
+
+  MemFInitTableDrive (NBPtr, MTAfterFreqChg);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function ramp up frequency the next level if it have not reached
+ *      its TargetSpeed yet.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNRampUpFrequencyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST UINT16 FreqList[] = {
+    DDR400_FREQUENCY,
+    DDR533_FREQUENCY,
+    DDR667_FREQUENCY,
+    DDR800_FREQUENCY,
+    DDR1066_FREQUENCY,
+    DDR1333_FREQUENCY,
+    DDR1600_FREQUENCY,
+    DDR1866_FREQUENCY
+  };
+  UINT8 Dct;
+  UINT8 i;
+  UINT16 NewSpeed;
+  DIE_STRUCT *MCTPtr;
+
+  MCTPtr = NBPtr->MCTPtr;
+
+  // Do not change frequency when it is already at TargetSpeed
+  if (NBPtr->DCTPtr->Timings.Speed == NBPtr->DCTPtr->Timings.TargetSpeed) {
+    return TRUE;
+  }
+
+  // Find the next supported frequency level
+  NewSpeed = NBPtr->DCTPtr->Timings.TargetSpeed;
+  for (i = 0; i < (GET_SIZE_OF (FreqList) - 1); i++) {
+    if (NBPtr->DCTPtr->Timings.Speed == FreqList[i]) {
+      NewSpeed = FreqList[i + 1];
+      break;
+    }
+  }
+  ASSERT (i < (GET_SIZE_OF (FreqList) - 1));
+  ASSERT (NewSpeed <= NBPtr->DCTPtr->Timings.TargetSpeed);
+
+  // BIOS must program both DCTs to the same frequency.
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nMemClkFreq changed: %d MHz", NBPtr->DCTPtr->Timings.Speed);
+  for (Dct = 0; Dct < MCTPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    NBPtr->DCTPtr->Timings.Speed = NewSpeed;
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, " -> %d MHz", NewSpeed);
+
+  NBPtr->ChangeFrequency (NBPtr);
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function ramp up frequency to target frequency
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNRampUpFrequencyUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  DIE_STRUCT *MCTPtr;
+
+  MCTPtr = NBPtr->MCTPtr;
+
+  // Do not change frequency when it is already at TargetSpeed
+  if (NBPtr->DCTPtr->Timings.Speed == NBPtr->DCTPtr->Timings.TargetSpeed) {
+    return TRUE;
+  }
+
+  // BIOS must program both DCTs to the same frequency.
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nMemClkFreq changed: %d MHz", NBPtr->DCTPtr->Timings.Speed);
+  for (Dct = 0; Dct < MCTPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    NBPtr->DCTPtr->Timings.Speed = NBPtr->DCTPtr->Timings.TargetSpeed;
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, " -> %d MHz", NBPtr->DCTPtr->Timings.TargetSpeed);
+
+  NBPtr->ChangeFrequency (NBPtr);
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function uses calculated values from DCT.Timings structure to
+ *      program its registers.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNProgramCycTimingsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST CTENTRY TmgAdjTab[] = {
+    // BitField, Min, Max, Bias, Ratio_x2
+    {BFTcl, 4, 12, 4, 2},
+    {BFTrcd, 5, 12, 5, 2},
+    {BFTrp, 5, 12, 5, 2},
+    {BFTrtp, 4, 7, 4, 2},
+    {BFTras, 15, 30, 15, 2},
+    {BFTrc, 11, 42, 11, 2},
+    {BFTwrDDR3, 5, 12, 4, 2},
+    {BFTrrd, 4, 7, 4, 2},
+    {BFTwtr, 4, 7, 4, 2},
+    {BFFourActWindow, 16, 32, 14, 1}
+  };
+
+  DCT_STRUCT *DCTPtr;
+  UINT8  *MiniMaxTmg;
+  UINT8  *MiniMaxTrfc;
+  UINT8  Value8;
+  UINT8  j;
+  BIT_FIELD_NAME BitField;
+
+  DCTPtr = NBPtr->DCTPtr;
+
+  //======================================================================
+  // Program turnaround timings to their max during DRAM init and training
+  //======================================================================
+  //
+  MemNSetBitFieldNb (NBPtr, BFNonSPD, 0x28FF);
+
+  MemNSetBitFieldNb (NBPtr, BFNonSPDHi, 0x2A);
+
+  //======================================================================
+  // Program DRAM Timing values
+  //======================================================================
+  //
+  MiniMaxTmg = &DCTPtr->Timings.CasL;
+  for (j = 0; j < GET_SIZE_OF (TmgAdjTab); j++) {
+    BitField = TmgAdjTab[j].BitField;
+
+    if (MiniMaxTmg[j] < TmgAdjTab[j].Min) {
+      MiniMaxTmg[j] = TmgAdjTab[j].Min;
+    } else if (MiniMaxTmg[j] > TmgAdjTab[j].Max) {
+      MiniMaxTmg[j] = TmgAdjTab[j].Max;
+    }
+
+    Value8 = (UINT8) MiniMaxTmg[j];
+
+    if (BitField == BFTwrDDR3) {
+      Value8 = (Value8 == 10) ? 9 : (Value8 >= 11) ? 10 : Value8;
+    } else if (BitField == BFTrtp) {
+      Value8 = (DCTPtr->Timings.Speed <= DDR1066_FREQUENCY) ? 4 : (DCTPtr->Timings.Speed == DDR1333_FREQUENCY) ? 5 : 6;
+    }
+
+    Value8 = Value8 - TmgAdjTab[j].Bias;
+    Value8 = (Value8 * TmgAdjTab[j].Ratio_x2) >> 1;
+
+    ASSERT ((BitField == BFTcl ) ? (Value8 <= 8) :
+            (BitField == BFTrcd) ? (Value8 <= 7) :
+            (BitField == BFTrp ) ? (Value8 <= 7) :
+            (BitField == BFTrtp) ? (Value8 <= 3) :
+            (BitField == BFTras) ? (Value8 <= 15) :
+            (BitField == BFTrc ) ? (Value8 <= 31) :
+            (BitField == BFTrrd) ? (Value8 <= 3) :
+            (BitField == BFTwtr) ? (Value8 <= 3) :
+            (BitField == BFTwrDDR3) ? ((Value8 >= 1) && (Value8 <= 6)) :
+            (BitField == BFFourActWindow) ? ((Value8 >= 1) && (Value8 <= 9)) : FALSE);
+    MemNSetBitFieldNb (NBPtr, BitField, Value8);
+  }
+
+  MiniMaxTrfc = &DCTPtr->Timings.Trfc0;
+  for (j = 0; j < 4; j++) {
+    ASSERT (MiniMaxTrfc[j] <= 4);
+    MemNSetBitFieldNb (NBPtr, BFTrfc0 + j, MiniMaxTrfc[j]);
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFTcwl, ((DCTPtr->Timings.Speed >= DDR800_FREQUENCY) ?
+                                     (NBPtr->GetMemClkFreqId (NBPtr, DCTPtr->Timings.Speed) - 3) : 0));
+
+  MemNSetBitFieldNb (NBPtr, BFTref, 2);      // 7.8 us
+
+  //======================================================================
+  // DRAM MRS Register, set ODT
+  //======================================================================
+  //
+  // DrvImpCtrl: drive impedance control.01b(34 ohm driver; Ron34 = Rzq/7)
+  MemNSetBitFieldNb (NBPtr, BFDrvImpCtrl, 1);
+
+  // burst length control
+  if (NBPtr->MCTPtr->Status[Sb128bitmode]) {
+    MemNSetBitFieldNb (NBPtr, BFBurstCtrl, 2);
+  }
+
+  // ASR=1, auto self refresh; SRT=0
+  MemNSetBitFieldNb (NBPtr, BFASR, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function uses calculated values from DCT.Timings structure to
+ *      program its registers.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNProgramCycTimingsClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST CTENTRY TmgAdjTab[] = {
+    // BitField, Min, Max, Bias, Ratio_x2
+    {BFTcl, 5, 14, 4, 2},
+    {BFTrcd, 5, 14, 5, 2},
+    {BFTrp, 5, 14, 5, 2},
+    {BFTrtp, 4, 8, 4, 2},
+    {BFTras, 15, 36, 15, 2},
+    {BFTrc, 20, 49, 11, 2},
+    {BFTwrDDR3, 5, 16, 4, 2},
+    {BFTrrd, 4, 8, 4, 2},
+    {BFTwtr, 4, 8, 4, 2},
+    {BFFourActWindow, 16, 40, 14, 1}
+  };
+
+  DCT_STRUCT *DCTPtr;
+  UINT8  *MiniMaxTmg;
+  UINT8  *MiniMaxTrfc;
+  UINT8  Value8;
+  UINT8  j;
+  UINT8  Tcwl;
+  UINT8  Trcd;
+  INT32  TCK_ps;
+  BIT_FIELD_NAME BitField;
+
+  DCTPtr = NBPtr->DCTPtr;
+
+  //======================================================================
+  // Program DRAM Timing values
+  //======================================================================
+  //
+  MiniMaxTmg = &DCTPtr->Timings.CasL;
+  for (j = 0; j < GET_SIZE_OF (TmgAdjTab); j++) {
+    BitField = TmgAdjTab[j].BitField;
+
+    if (MiniMaxTmg[j] < TmgAdjTab[j].Min) {
+      MiniMaxTmg[j] = TmgAdjTab[j].Min;
+    } else if (MiniMaxTmg[j] > TmgAdjTab[j].Max) {
+      MiniMaxTmg[j] = TmgAdjTab[j].Max;
+    }
+
+    Value8 = (UINT8) MiniMaxTmg[j];
+
+    if (BitField == BFTwrDDR3) {
+      if (NBPtr->IsSupported[AdjustTwr]) {
+        Value8 ++;
+      }
+      Value8 = (Value8 >= 10) ? (((Value8 + 1) / 2) + 4) : Value8;
+    }
+
+    if ((BitField == BFTrc) && NBPtr->IsSupported[AdjustTrc]) {
+      Value8 -= 5;
+    }
+
+    Value8 = Value8 - TmgAdjTab[j].Bias;
+    Value8 = (Value8 * TmgAdjTab[j].Ratio_x2) >> 1;
+
+    ASSERT ((BitField == BFTcl ) ? ((Value8 >= 1) && (Value8 <= 10)) :
+            (BitField == BFTrcd) ? (Value8 <= 9) :
+            (BitField == BFTrp ) ? (Value8 <= 9) :
+            (BitField == BFTrtp) ? (Value8 <= 4) :
+            (BitField == BFTras) ? (Value8 <= 21) :
+            (BitField == BFTrc ) ? (NBPtr->IsSupported[AdjustTrc] ? ((Value8 >= 4) && (Value8 <= 38)) : ((Value8 >= 9) && (Value8 <= 38))) :
+            (BitField == BFTrrd) ? (Value8 <= 4) :
+            (BitField == BFTwtr) ? (Value8 <= 4) :
+            (BitField == BFTwrDDR3) ? (Value8 <= 7) :
+            (BitField == BFFourActWindow) ? ((Value8 >= 1) && (Value8 <= 13)) : FALSE);
+    MemNSetBitFieldNb (NBPtr, BitField, Value8);
+  }
+
+  MiniMaxTrfc = &DCTPtr->Timings.Trfc0;
+  for (j = 0; j < 4; j++) {
+    ASSERT (MiniMaxTrfc[j] <= 5);
+    MemNSetBitFieldNb (NBPtr, BFTrfc0 + j, MiniMaxTrfc[j]);
+  }
+
+  Tcwl = (UINT8) (DCTPtr->Timings.Speed / 133) + 2;
+  MemNSetBitFieldNb (NBPtr, BFTcwl, ((Tcwl > 5) ? (Tcwl - 5) : 0));
+
+  MemNSetBitFieldNb (NBPtr, BFTref, 2);      // Tref = 7.8 us
+
+  // Skid buffer can only be programmed once before Dram init
+  if (NBPtr->DCTPtr->Timings.Speed == DDR800_FREQUENCY) {
+    TCK_ps = 1000500 / DCTPtr->Timings.TargetSpeed;
+    Trcd = (UINT8) ((((1000 / 40) * (UINT32)DCTPtr->Timings.DIMMTrcd) + TCK_ps - 1) / TCK_ps);
+    MemNSetBitFieldNb (NBPtr, BFDbeSkidBufDis, (Trcd > 10) ? 0 : 1);
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFRdOdtTrnOnDly, (DCTPtr->Timings.CasL > Tcwl) ? (DCTPtr->Timings.CasL - Tcwl) : 0);
+
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function uses calculated values from DCT.Timings structure to
+ *      program its registers for UNB
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNProgramCycTimingsUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST CTENTRY TmgAdjTab[] = {
+    // BitField, Min, Max, Bias, Ratio_x2
+    {BFTcl, 5, 14, 0, 2},
+    {BFTrcd, 2, 19, 0, 2},
+    {BFTrp, 2, 19, 0, 2},
+    {BFTrtp, 4, 10, 0, 2},
+    {BFTras, 8, 40, 0, 2},
+    {BFTrc, 10, 56, 0, 2},
+    {BFTwrDDR3, 5, 16, 0, 2},
+    {BFTrrd, 4, 9, 0, 2},
+    {BFTwtr, 4, 9, 0, 2},
+    {BFFourActWindow, 6, 42, 0, 2}
+  };
+
+  DCT_STRUCT *DCTPtr;
+  UINT8  *MiniMaxTmg;
+  UINT8  *MiniMaxTrfc;
+  UINT8  Value8;
+  UINT8  j;
+  UINT8  Tcwl;
+  UINT8 RdOdtTrnOnDly;
+  BIT_FIELD_NAME BitField;
+
+  DCTPtr = NBPtr->DCTPtr;
+
+  //======================================================================
+  // Program DRAM Timing values
+  //======================================================================
+  //
+  MiniMaxTmg = &DCTPtr->Timings.CasL;
+  for (j = 0; j < GET_SIZE_OF (TmgAdjTab); j++) {
+    BitField = TmgAdjTab[j].BitField;
+
+    if (BitField == BFTrp) {
+      if (NBPtr->IsSupported[AdjustTrp]) {
+        MiniMaxTmg[j] ++;
+        if (MiniMaxTmg[j] < 5) {
+          MiniMaxTmg[j] = 5;
+        }
+      }
+    }
+
+    if (MiniMaxTmg[j] < TmgAdjTab[j].Min) {
+      MiniMaxTmg[j] = TmgAdjTab[j].Min;
+    } else if (MiniMaxTmg[j] > TmgAdjTab[j].Max) {
+      MiniMaxTmg[j] = TmgAdjTab[j].Max;
+    }
+
+    Value8 = (UINT8) MiniMaxTmg[j];
+
+    if (BitField == BFTwrDDR3) {
+      if ((Value8 > 8) && ((Value8 & 1) != 0)) {
+        ASSERT (FALSE);
+      }
+    }
+
+    MemNSetBitFieldNb (NBPtr, BitField, Value8);
+  }
+
+  MiniMaxTrfc = &DCTPtr->Timings.Trfc0;
+  for (j = 0; j < 4; j++) {
+    if ((NBPtr->DCTPtr->Timings.DctDimmValid & (1 << j)) != 0) {
+      ASSERT (MiniMaxTrfc[j] <= 4);
+      MemNSetBitFieldNb (NBPtr, BFTrfc0 + j, MiniMaxTrfc[j]);
+    }
+  }
+
+  Tcwl = (UINT8) (DCTPtr->Timings.Speed / 133) + 2;
+  MemNSetBitFieldNb (NBPtr, BFTcwl, ((Tcwl > 5) ? Tcwl : 5));
+
+  MemNSetBitFieldNb (NBPtr, BFTref, 2);      // 7.8 us
+
+  RdOdtTrnOnDly = (DCTPtr->Timings.CasL > Tcwl) ? (DCTPtr->Timings.CasL - Tcwl) : 0;
+  MemNSetBitFieldNb (NBPtr, BFRdOdtTrnOnDly, RdOdtTrnOnDly);
+  NBPtr->FamilySpecificHook[ProgOdtControl] (NBPtr, NULL);
+
+  //
+  // Program Tmod
+  //
+  MemNSetBitFieldNb (NBPtr, BFTmod, (DCTPtr->Timings.Speed < DDR1866_FREQUENCY) ? 0x0C :
+                                    (DCTPtr->Timings.Speed > DDR1866_FREQUENCY) ? 0x10 : 0x0E);
+  //
+  // Program Tzqcs and Tzqoper
+  //
+  // Tzqcs max(64nCK, 80ns)
+  MemNSetBitFieldNb (NBPtr, BFTzqcs, MIN (6, (MAX (64, MemUnsToMemClk (NBPtr->DCTPtr->Timings.Speed, 80)) + 15) / 16));
+  // Tzqoper max(256nCK, 320ns)
+  MemNSetBitFieldNb (NBPtr, BFTzqoper, MIN (0xC, (MAX (256, MemUnsToMemClk (NBPtr->DCTPtr->Timings.Speed, 320)) + 31) / 32));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets platform specific settings for the current channel
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - All platform types defined have initialized successfully
+ *     @return          FALSE - At least one of the platform types gave not been initialized successfully
+ */
+
+BOOLEAN
+MemNGetPlatformCfgNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 p;
+
+  for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+    ASSERT (NBPtr->MemPtr->GetPlatformCfg[p] != NULL);
+    if (NBPtr->MemPtr->GetPlatformCfg[p] (NBPtr->MemPtr, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr) == AGESA_SUCCESS) {
+      break;
+    }
+  }
+  return (p < MAX_PLATFORM_TYPES);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function retrieves the Max latency parameters
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @param[in]  *MinDlyPtr - Pointer to variable to store the Minimum Delay value
+ *     @param[in]  *MaxDlyPtr - Pointer to variable to store the Maximum Delay value
+ *     @param[in]  *DlyBiasPtr - Pointer to variable to store Delay Bias value
+ *     @param[in]  MaxRcvEnDly - Maximum receiver enable delay value
+ */
+
+VOID
+MemNGetMaxLatParamsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly,
+  IN OUT   UINT16 *MinDlyPtr,
+  IN OUT   UINT16 *MaxDlyPtr,
+  IN OUT   UINT16 *DlyBiasPtr
+  )
+{
+  *MinDlyPtr = (MemNTotalSyncComponentsNb (NBPtr) + (MaxRcvEnDly >> 5)) * 2;
+  MemNQuarterMemClk2NClkNb (NBPtr, MinDlyPtr);
+
+  *MaxDlyPtr = 0x3FF;
+
+  *DlyBiasPtr = 4;
+  MemNQuarterMemClk2NClkNb (NBPtr, DlyBiasPtr);   // 1 MEMCLK Margin
+
+  *DlyBiasPtr += 1;  // add 1 NCLK
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function  sets the maximum round-trip latency in the system from the processor to the DRAM
+ *   devices and back.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     MaxRcvEnDly - Maximum receiver enable delay value
+ *
+ */
+
+VOID
+MemNSetMaxLatencyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly
+  )
+{
+  UINT16 SubTotal;
+
+  AGESA_TESTPOINT (TpProcMemRcvrCalcLatency, &(NBPtr->MemPtr->StdHeader));
+
+  SubTotal = 0xC8;    // init value for MaxRdLat used in training
+
+
+  if (MaxRcvEnDly != 0xFFFF) {
+    // Get all sync components BKDG steps 1-5
+    SubTotal = MemNTotalSyncComponentsNb (NBPtr);
+
+    // Add the maximum (worst case) delay value of DqsRcvEnGrossDelay
+    // that exists across all DIMMs and byte lanes.
+    //
+    SubTotal += MaxRcvEnDly >> 5;
+
+
+    // Add 14.5 to the sub-total. 14.5 represents part of the processor
+    // specific constant delay value in the DRAM clock domain.
+    //
+    SubTotal <<= 1;             // scale 1/2 MemClk to 1/4 MemClk
+    SubTotal += 29;             // add 14.5 1/2 MemClk
+
+    // Convert the sub-total (in 1/2 MEMCLKs) to northbridge clocks (NCLKs)
+    // as follows (assuming DDR400 and assuming that no P-state or link speed
+    // changes have occurred).
+    //
+    MemNQuarterMemClk2NClkNb (NBPtr, &SubTotal);
+
+    // Add 2 NCLKs to the sub-total. 2 represents part of the processor
+    // specific constant value in the northbridge clock domain.
+    //
+    SubTotal += 2;
+  }
+
+  NBPtr->DCTPtr->Timings.MaxRdLat = SubTotal;
+  // Program the F2x[1, 0]78[MaxRdLatency] register with the total delay value
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMaxRdLat: %03x\n", SubTotal);
+  MemNSetBitFieldNb (NBPtr, BFMaxLatency, SubTotal);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sends the ZQCL command
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSendZQCmdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  // 1.Program MrsAddress[10]=1
+  MemNSetBitFieldNb (NBPtr, BFMrsAddress, (UINT32)1 << 10);
+
+  // 2.Set SendZQCmd=1
+  MemNSetBitFieldNb (NBPtr, BFSendZQCmd, 1);
+
+  // 3.Wait for SendZQCmd=0
+  MemNPollBitFieldNb (NBPtr, BFSendZQCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+
+  // 4.Wait 512 MEMCLKs
+  MemNWaitXMemClksNb (NBPtr, 512);
+}
+
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function is used to create the DRAM map
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ */
+
+VOID
+STATIC
+MemNAfterStitchMemNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (NBPtr->MCTPtr->GangedMode) {
+    NBPtr->MCTPtr->NodeMemSize = NBPtr->DCTPtr->Timings.DctMemSize;
+    NBPtr->MCTPtr->NodeSysLimit = NBPtr->MCTPtr->NodeMemSize - 1;
+    NBPtr->MCTPtr->DctData[1].Timings.CsPresent = NBPtr->DCTPtr->Timings.CsPresent;
+    NBPtr->MCTPtr->DctData[1].Timings.CsEnabled = NBPtr->DCTPtr->Timings.CsEnabled;
+    NBPtr->MCTPtr->DctData[1].Timings.DctMemSize = NBPtr->DCTPtr->Timings.DctMemSize;
+  } else {
+    // In unganged mode, add DCT0 and DCT1 to NodeMemSize
+    NBPtr->MCTPtr->NodeMemSize += NBPtr->DCTPtr->Timings.DctMemSize;
+    NBPtr->MCTPtr->NodeSysLimit = NBPtr->MCTPtr->NodeMemSize - 1;
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *       This function Return the binary value of tfaw associated with
+ *       the index k
+ *
+ *     @param[in]     k value
+ *
+ *     @return       F[k], in Binary MHz.
+ */
+
+UINT8
+MemNGet1KTFawTkNb (
+  IN       UINT8 k
+  )
+{
+  CONST UINT8 Tab1KTfawTK[] = {0, 8, 10, 13, 14, 19};
+  ASSERT (k <= 5);
+  return Tab1KTfawTK[k];
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *       This function Return the binary value of the 2KTFaw associated with
+ *       the index k
+ *
+ *     @param[in]     k value
+ *
+ *     @return       2KTFaw converted based on k.
+ */
+
+UINT8
+MemNGet2KTFawTkNb (
+  IN       UINT8 k
+  )
+{
+  CONST UINT8 Tab2KTfawTK[] = {0, 10, 14, 17, 18, 24};
+  ASSERT (k <= 5);
+  return Tab2KTfawTK[k];
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function converts the sub-total (in 1/4 MEMCLKs) to northbridge clocks (NCLKs)
+ *      (assuming DDR400 and assuming that no P-state or link speed
+ *      changes have occurred).
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *SubTotalPtr - pointer to Sub-Total
+ */
+
+VOID
+STATIC
+MemNQuarterMemClk2NClkNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   UINT16 *SubTotalPtr
+  )
+{
+  UINT32 NBFreq;
+  UINT32 MemFreq;
+
+  // Multiply SubTotal by NB COF
+  NBFreq = (MemNGetBitFieldNb (NBPtr, BFNbFid) + 4) * 200;
+  // Divide SubTotal by 4 times current MemClk frequency
+  MemFreq = NBPtr->DCTPtr->Timings.Speed * 4;
+  *SubTotalPtr = (UINT16) (((NBFreq * (*SubTotalPtr)) + MemFreq - 1) / MemFreq);  // round up
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the total of sync components for Max Read Latency calculation
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return      Total in 1/2 MEMCLKs
+ */
+
+UINT16
+MemNTotalSyncComponentsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT16 SubTotal;
+
+  // Multiply the CAS Latency by two to get a number of 1/2 MEMCLKs UINTs.
+  SubTotal = (UINT16) MemNGetBitFieldNb (NBPtr, BFTcl) + 1;
+  if ((MemNGetBitFieldNb (NBPtr, BFDdr3Mode)) != 0) {
+    SubTotal += 3;
+  }
+  SubTotal *= 2;
+
+  // If registered DIMMs are being used then add 1 MEMCLK to the sub-total.
+  if ((MemNGetBitFieldNb (NBPtr, BFUnBuffDimm)) == 0) {
+    SubTotal += 2;
+  }
+
+  // If (F2x[1, 0]9C_x04[AddrCmdSetup] and F2x[1, 0]9C_x04[CsOdtSetup] and F2x[1, 0]9C_x04[Cke-Setup] = 0) then K = K + 1
+  // If (F2x[1, 0]9C_x04[AddrCmdSetup] or F2x[1, 0]9C_x04[CsOdtSetup] or F2x[1, 0]9C_x04[CkeSetup] = 1) then K = K + 2
+  if ((MemNGetBitFieldNb (NBPtr, BFAddrTmgControl) & 0x0202020) == 0) {
+    SubTotal += 1;
+  } else {
+    SubTotal += 2;
+  }
+
+  // If the F2x[1, 0]78[RdPtrInit] field is 4, 5, 6 or 7 MEMCLKs,
+  // then add 4, 3, 2, or 1 MEMCLKs, respectively to the sub-total.
+  //
+  SubTotal = SubTotal + (8 - (UINT16) MemNGetBitFieldNb (NBPtr, BFRdPtrInit));
+
+  return SubTotal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function swaps bits for OnDimmMirror support
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSwapBitsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 ChipSel;
+  UINT32 MRSReg;
+
+  ChipSel = (UINT8) MemNGetBitFieldNb (NBPtr, BFMrsChipSel);
+  if ((ChipSel & 1) != 0) {
+    MRSReg = MemNGetBitFieldNb (NBPtr, BFDramInitRegReg);
+    if ((NBPtr->DCTPtr->Timings.DimmMirrorPresent & (1 << (ChipSel >> 1))) != 0) {
+      MRSReg = (MRSReg & 0xFFFCFE07) | ((MRSReg&0x100A8) << 1) | ((MRSReg&0x20150) >> 1);
+      MemNSetBitFieldNb (NBPtr, BFDramInitRegReg, MRSReg);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function swaps bits for OnDimmMirror support for Unb
+ *
+ *     Dimm Mirroring Requires that, during MRS command cycles, the following
+ *     bits are swapped by software
+ *
+ *             A3 -> A4         A7 -> A8
+ *             A4 -> A3         BA0 -> BA1
+ *             A5 -> A6         BA1 -> BA0
+ *             A6 -> A5
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSwapBitsUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 ChipSel;
+  UINT32 MRSBank;
+  UINT32 MRSAddr;
+
+  ChipSel = (UINT8) MemNGetBitFieldNb (NBPtr, BFMrsChipSel);
+  if ((ChipSel & 1) != 0) {
+    if ((NBPtr->DCTPtr->Timings.DimmMirrorPresent & (1 << (ChipSel >> 1))) != 0) {
+      MRSBank = MemNGetBitFieldNb (NBPtr, BFMrsBank);
+      MRSAddr = MemNGetBitFieldNb (NBPtr, BFMrsAddress);
+
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d MR%d %05x swapped to ->",
+                                                                    (ChipSel & 0x7),
+                                                                    (MRSBank & 0x7),
+                                                                    (MRSAddr & 0x3FFFF));
+      //
+      // Swap Mrs Bank bits 0 with 1
+      MRSBank = (MRSBank & 0x0100) | ((MRSBank & 0x01) << 1) | ((MRSBank & 0x02) >> 1);
+      //
+      // Swap Mrs Address bits 3 with 4, 5 with 6, and 7 with 8
+      MRSAddr = (MRSAddr & 0x03FE07) | ((MRSAddr&0x000A8) << 1) | ((MRSAddr&0x00150) >> 1);
+      MemNSetBitFieldNb (NBPtr, BFMrsBank, MRSBank);
+      MemNSetBitFieldNb (NBPtr, BFMrsAddress, MRSAddr);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   Programs Address/command timings, driver strengths, and tri-state fields.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNProgramPlatformSpecNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST UINT8           PinType[3]  = {PSO_CKE_TRI, PSO_ODT_TRI,   PSO_CS_TRI};
+  CONST UINT8           TabSize[3]  = {          2,           4,            8};
+  CONST BIT_FIELD_NAME  BitField[3] = {   BFCKETri,    BFODTTri, BFChipSelTri};
+  UINT8  *TabPtr;
+  UINT8  i;
+  UINT8  k;
+  UINT8  Value;
+  //===================================================================
+  // Tristate unused CKE, ODT and chip select to save power
+  //===================================================================
+  //
+  TabPtr = NULL;
+  for (k = 0; k < sizeof (PinType); k++) {
+    if (NBPtr->IsSupported[CheckFindPSOverideWithSocket]) {
+      TabPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PinType[k], NBPtr->MCTPtr->SocketId, MemNGetSocketRelativeChannelNb (NBPtr, NBPtr->Dct, 0), 0,
+                                    &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+    }
+    if (NBPtr->IsSupported[CheckFindPSDct]) {
+      TabPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PinType[k], NBPtr->MCTPtr->SocketId, NBPtr->Dct, 0,
+                                    &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+    }
+    if (TabPtr == NULL) {
+      switch (k) {
+      case 0:
+        TabPtr = NBPtr->ChannelPtr->CKETriMap;
+        break;
+      case 1:
+        TabPtr = NBPtr->ChannelPtr->ODTTriMap;
+        break;
+      case 2:
+        TabPtr = NBPtr->ChannelPtr->ChipSelTriMap;
+        break;
+      default:
+        IDS_ERROR_TRAP;
+      }
+    }
+    ASSERT (TabPtr != NULL);
+
+    Value = 0;
+    for (i = 0; i < TabSize[k]; i++) {
+      if ((NBPtr->DCTPtr->Timings.CsPresent & TabPtr[i]) == 0) {
+        Value |= (UINT8) (1 << i);
+      }
+    }
+
+    if (PinType[k] == PSO_CS_TRI) {
+      NBPtr->FamilySpecificHook[BeforeSetCsTri] (NBPtr, &Value);
+    }
+
+    ASSERT (k < GET_SIZE_OF (BitField));
+    MemNSetBitFieldNb (NBPtr, BitField[k], Value);
+  }
+  NBPtr->MemNBeforePlatformSpecNb (NBPtr);
+
+  //===================================================================
+  // Program Address/Command timings and driver strength
+  //===================================================================
+  //
+  MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_ADDRTMG, ALL_DIMMS);
+  MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_ODCCONTROL, ALL_DIMMS);
+
+  MemNSetBitFieldNb (NBPtr, BFSlowAccessMode, (NBPtr->ChannelPtr->SlowMode) ? 1 : 0);
+  MemNSetBitFieldNb (NBPtr, BFODCControl, NBPtr->ChannelPtr->DctOdcCtl);
+  MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, NBPtr->ChannelPtr->DctAddrTmg);
+  NBPtr->FamilySpecificHook[SetDqsODT] (NBPtr, NBPtr);
+
+  if (NBPtr->IsSupported[CheckODTControls]) {
+    MemNSetBitFieldNb (NBPtr, BFPhyRODTCSLow, NBPtr->ChannelPtr->PhyRODTCSLow);
+    MemNSetBitFieldNb (NBPtr, BFPhyRODTCSHigh, NBPtr->ChannelPtr->PhyRODTCSHigh);
+    MemNSetBitFieldNb (NBPtr, BFPhyWODTCSLow, NBPtr->ChannelPtr->PhyWODTCSLow);
+    MemNSetBitFieldNb (NBPtr, BFPhyWODTCSHigh, NBPtr->ChannelPtr->PhyWODTCSHigh);
+  }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the Trdrd value
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return      Trdrd value
+ */
+
+UINT8
+MemNGetTrdrdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  DCT_STRUCT *DCTPtr;
+  INT8 Cgdd;
+
+  DCTPtr = NBPtr->DCTPtr;
+
+  // BIOS calculates Trdrd (in MEMCLKs) = CGDD / 2 + 3 clocks and programs F2x[1, 0]8C[Trdrd] with the
+  // converted field value. BIOS rounds fractional values down.
+  // The Critical Gross Delay Difference (CGDD) for Trdrd on any given byte lane is the largest F2x[1,
+  // 0]9C_x[3:0][2B:10][DqsRcvEnGrossDelay] delay of any DIMM minus the F2x[1,
+  // 0]9C_x[3:0][2B:10][DqsRcvEnGrossDelay] delay of any other DIMM.
+
+  Cgdd = MemNGetOptimalCGDDNb (NBPtr, AccessRcvEnDly, AccessRcvEnDly);
+  DCTPtr->Timings.Trdrd = (Cgdd / 2) + 3;
+
+  // Transfer clk to reg definition, 2T is 00b, etc.
+  DCTPtr->Timings.Trdrd -= 2;
+  if (DCTPtr->Timings.Trdrd > 8) {
+    DCTPtr->Timings.Trdrd = 8;
+  }
+
+  return DCTPtr->Timings.Trdrd;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the Twrwr value
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return      Twrwr value
+ */
+
+UINT8
+MemNGetTwrwrNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  DCT_STRUCT *DCTPtr;
+  INT8 Cgdd;
+
+  DCTPtr = NBPtr->DCTPtr;
+
+  // Twrwr (in MEMCLKs) = CGDD / 2 + 3 clocks and programs F2x[1, 0]8C[Twrwr] with the
+  // converted field value. BIOS rounds fractional values down.
+  // On any given byte lane, the largest F2x[1, 0]9C_x[3:0][A, 7, 6, 0][2:1]:F2x[1, 0]9C_x[3:0][A, 7, 6,
+  // 0]3[WrDatGrossDlyByte] delay of any DIMM minus the F2x[1, 0]9C_x[3:0][A, 7, 6, 0][2:1]:F2x[1,
+  // 0]9C_x[3:0][A, 7, 6, 0]3[WrDatGrossDlyByte] delay of any other DIMM is equal to the Critical Gross
+  // Delay Difference (CGDD) for Twrwr.
+
+  Cgdd = MemNGetOptimalCGDDNb (NBPtr, AccessWrDatDly, AccessWrDatDly);
+  DCTPtr->Timings.Twrwr = (Cgdd / 2) + 3;
+  NBPtr->TechPtr->AdjustTwrwr (NBPtr->TechPtr);
+
+  return DCTPtr->Timings.Twrwr;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the Twrrd value. BIOS calculates Twrrd (in MEMCLKs) = CGDD / 2 - LD + 3 clocks and programs
+ * F2x[1, 0]8C[Twrrd] with the converted field value. BIOS rounds fractional
+ * values down.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return  Value to be programmed to Twrrd field
+ *              pDCT->Timings.Twrrd updated
+ */
+
+UINT8
+MemNGetTwrrdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  INT8 Cgdd;
+  INT8 Ld;
+  INT8 Twrrd;
+  DCT_STRUCT *DCTPtr;
+
+  DCTPtr = NBPtr->DCTPtr;
+
+  //
+  // For DDR3, BIOS calculates the latency difference (Ld) as equal to read CAS latency minus write CAS
+  // latency, in MEMCLKs (see F2x[1, 0]88[Tcl] and F2x[1, 0]84[Tcwl]) which can be a negative or positive
+  // value.
+  // For DDR2, LD is always one clock (For DDR2, Tcwl is always Tcl minus 1).
+  //
+  Ld = NBPtr->TechPtr->GetLD (NBPtr->TechPtr);
+
+  // On any given byte lane, the largest WrDatGrossDlyByte delay of any DIMM
+  // minus the DqsRcvEnGrossDelay delay of any other DIMM is
+  // equal to the Critical Gross Delay Difference (CGDD) for Twrrd.
+  Cgdd = MemNGetOptimalCGDDNb (NBPtr, AccessWrDatDly, AccessRcvEnDly);
+  Twrrd = (Cgdd / 2) - Ld + 3;
+  DCTPtr->Timings.Twrrd = (UINT8) ((Twrrd >= 0) ? Twrrd : 0);
+  NBPtr->TechPtr->AdjustTwrrd (NBPtr->TechPtr);
+
+  return DCTPtr->Timings.Twrrd;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the TrwtTO value
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return  pDCT->Timings.TrwtTO updated
+ */
+
+UINT8
+MemNGetTrwtTONb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  INT8 Cgdd;
+  INT8 Ld;
+  INT8 TrwtTO;
+  DCT_STRUCT *DCTPtr;
+
+  DCTPtr = NBPtr->DCTPtr;
+  //
+  // For DDR3, BIOS calculates the latency difference (Ld) as equal to read CAS latency minus write CAS
+  // latency, in MEMCLKs (see F2x[1, 0]88[Tcl] and F2x[1, 0]84[Tcwl]) which can be a negative or positive
+  // value.
+  // For DDR2, LD is always one clock (For DDR2, Tcwl is always Tcl minus 1).
+  //
+  Ld = NBPtr->TechPtr->GetLD (NBPtr->TechPtr);
+
+  // On any byte lane, the largest DqsRcvEnGrossDelay delay of any DIMM minus
+  // the WrDatGrossDlyByte delay of any other DIMM is equal to the Critical Gross
+  // Delay Difference (CGDD) for TrwtTO.
+  Cgdd = MemNGetOptimalCGDDNb (NBPtr, AccessRcvEnDly, AccessWrDatDly);
+  TrwtTO = (Cgdd / 2) + Ld + 3;
+  TrwtTO -= 2;
+  DCTPtr->Timings.TrwtTO = (UINT8) ((TrwtTO > 1) ? TrwtTO : 1);
+
+  return DCTPtr->Timings.TrwtTO;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the TrwtWB value
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return      TrwtWB value
+ */
+UINT8
+MemNGetTrwtWBNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  DCT_STRUCT *DCTPtr;
+
+  DCTPtr = NBPtr->DCTPtr;
+
+  // TrwtWB ensures read-to-write data-bus turnaround.
+  // This value should be one more than the programmed TrwtTO.
+  return DCTPtr->Timings.TrwtWB = DCTPtr->Timings.TrwtTO;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function converts MemClk frequency in MHz to MemClkFreq value
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Speed   - MemClk frequency in MHz
+ *
+ *     @return      MemClkFreq value
+ */
+UINT8
+MemNGetMemClkFreqIdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 Speed
+  )
+{
+  return (UINT8) ((Speed < DDR800_FREQUENCY) ? ((Speed / 66) - 3) : (Speed / 133));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function enables swapping interleaved region feature.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Base   - Swap interleaved region base [47:27]
+ *     @param[in]   Limit   - Swap interleaved region limit [47:27]
+ *
+ */
+VOID
+MemNEnableSwapIntlvRgnNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Base,
+  IN       UINT32 Limit
+  )
+{
+  UINT32 Size;
+  UINT32 SizeOfAlign;
+
+  // Swapped interleaving region must be below 16G
+  if (Limit < (1 << (34 - 27))) {
+    // Adjust Base and Size to meet :
+    // 1. The size of the swapped region must be less than or equal to the alignment of F2x10C[IntLvRegionBase].
+    // 2. Entire UMA region is swapped with interleaving region.
+    Size = Limit - Base;
+    SizeOfAlign = (UINT32) 1 << LibAmdBitScanForward (Base);
+    while (SizeOfAlign <= Size) {
+      // In case of SizeOfAlign <= Size, UmaBase -= 128MB, SizeOfIntlvrgn += 128MB.
+      Base -= 1;
+      Size += 1;
+      SizeOfAlign = (UINT32) 1 << LibAmdBitScanForward (Base);
+    }
+    MemNSetBitFieldNb (NBPtr, BFIntLvRgnBaseAddr, Base);
+    MemNSetBitFieldNb (NBPtr, BFIntLvRgnLmtAddr, (Limit - 1));
+    MemNSetBitFieldNb (NBPtr, BFIntLvRgnSize, Size);
+    MemNSetBitFieldNb (NBPtr, BFIntLvRgnSwapEn, 1);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function converts MemClk frequency in MHz to MemClkFreq value
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Speed   - MemClk frequency in MHz
+ *
+ *     @return      MemClkFreq value
+ */
+UINT8
+MemNGetMemClkFreqIdClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 Speed
+  )
+{
+  return (UINT8) ((Speed > DDR400_FREQUENCY) ? ((Speed / 33) - 6) : ((Speed == DDR400_FREQUENCY) ? 2 : (Speed / 55)));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function converts MemClk frequency in MHz to MemClkFreq value
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Speed   - MemClk frequency in MHz
+ *
+ *     @return      MemClkFreq value
+ */
+UINT8
+MemNGetMemClkFreqIdUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 Speed
+  )
+{
+  return (UINT8) ((Speed > DDR400_FREQUENCY) ? ((Speed / 33) - 6) : ((Speed == DDR400_FREQUENCY) ? 2 : (Speed / 55)));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function converts MemClkFreq Id value to MemClk frequency in MHz
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       FreqId   - FreqId from Register
+ *
+ *     @return          MemClk frequency in MHz
+ */
+UINT16
+MemNGetMemClkFreqUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 FreqId
+  )
+{
+  UINT16 MemClkFreq;
+  if (FreqId > 2) {
+    MemClkFreq = (FreqId == 14) ? 667 : (300 + ((FreqId - 3) * 33) + (FreqId - 3) / 3);
+  } else if (FreqId == 2) {
+    MemClkFreq = 200;
+  } else {
+    MemClkFreq = 50 + (50 * FreqId);
+  }
+  return MemClkFreq;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function change MemClk frequency to the value that is specified by DCTPtr->Timings.Speed
+ *  for client NB.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNChangeFrequencyClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  UINT8 Dct;
+  UINT8 ChipSel;
+  UINT16 FinalPllLockTime;
+  BOOLEAN FrequencyChangeSuccess;
+  UINT64  OrgMMIOCfgBase;
+  UINT64  NewMMIOCfgBase;
+
+  TechPtr = NBPtr->TechPtr;
+
+  // Disable MMIO to prevent speculative DRAM reads during self refresh
+  LibAmdMsrRead (MSR_MMIO_Cfg_Base, &OrgMMIOCfgBase, &(NBPtr->MemPtr->StdHeader));
+  NewMMIOCfgBase = OrgMMIOCfgBase & (~(BIT0));
+  LibAmdMsrWrite (MSR_MMIO_Cfg_Base, &NewMMIOCfgBase, &(NBPtr->MemPtr->StdHeader));
+
+  MemNBrdcstSetNb (NBPtr, BFDisDllShutdownSR, 1);
+
+  //Program F2x[1,0]90[EnterSelfRefresh]=1.
+  //Wait until the hardware resets F2x[1,0]90[EnterSelfRefresh]=0.
+  MemNBrdcstSetNb (NBPtr, BFEnterSelfRef, 1);
+  MemNPollBitFieldNb (NBPtr, BFEnterSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+
+  if (NBPtr->ChangeNbFrequency (NBPtr)) {
+    // Reprogram Twr, Tcwl, and Tcl based on the new MEMCLK frequency.
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        TechPtr->AutoCycTiming (TechPtr);
+        if (!MemNPlatformSpecUnb (NBPtr)) {
+          IDS_ERROR_TRAP;
+        }
+      }
+    }
+
+    // 1. Program PllLockTime to Family-specific value
+    MemNBrdcstSetNb (NBPtr, BFPllLockTime, NBPtr->FreqChangeParam->PllLockTimeDefault);
+
+    // 2. Program D18F2x[1,0]94[MemClkFreqVal] = 0.
+    MemNBrdcstSetNb (NBPtr, BFMemClkFreqVal, 0);
+
+    // 3. Program D18F2x[1,0]94[MemClkFreq] to the desired DRAM frequency.
+    MemNBrdcstSetNb (NBPtr, BFMemClkFreq, NBPtr->GetMemClkFreqId (NBPtr, NBPtr->DCTPtr->Timings.Speed));
+
+    // 4. Program D18F2x[1,0]F4_x30[DbeGskFifoNumerator] and D18F2x[1,0]F4_x31[DbeGskFifoDenominator].
+    // 5. Program D18F2x[1,0]F4_x32[DataTxFifoSchedDlyNegSlot1, DataTxFifoSchedDlySlot1,
+    // DataTxFifoSchedDlyNegSlot0, DataTxFifoSchedDlySlot0]. See 2.10.3.2.2.1 [DCT Transmit Fifo Schedule
+    // Delay Programming].
+    // 6. D18F2x[1,0]78[RdPtrInit] = IF (D18F2x[1,0]94[MemClkFreq] >= 667 MHz) THEN 7 ELSE 8 ENDIF (Llano)
+    //                                                                         THEN 2 ELSE 3 ENDIF (Ontario)
+    NBPtr->ProgramNbPsDependentRegs (NBPtr);
+
+    NBPtr->FamilySpecificHook[BeforeMemClkFreqVal] (NBPtr, NBPtr);
+    IDS_OPTION_HOOK (IDS_BEFORE_MEM_FREQ_CHG, NBPtr, &(NBPtr->MemPtr->StdHeader));
+    // 7. Program D18F2x[1,0]94[MemClkFreqVal] = 1.
+    MemNBrdcstSetNb (NBPtr, BFMemClkFreqVal, 1);
+    MemNPollBitFieldNb (NBPtr, BFFreqChgInProg, 0, PCI_ACCESS_TIMEOUT, TRUE);
+    FinalPllLockTime = 0xF;
+    NBPtr->FamilySpecificHook[AfterMemClkFreqVal] (NBPtr, &FinalPllLockTime);
+
+    // 8. IF (D18F2x[1,0]9C_x0D0F_E00A[CsrPhySrPllPdMode]==0) THEN program
+    // D18F2x[1,0]9C_x0D0F_E006[PllLockTime] = 0Fh.
+    if (!NBPtr->IsSupported[CsrPhyPllPdEn]) {
+      MemNBrdcstSetNb (NBPtr, BFPllLockTime, FinalPllLockTime);
+    }
+
+    FrequencyChangeSuccess = TRUE;
+  } else {
+    // If NB frequency cannot be updated, use the current speed as the target speed
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      NBPtr->DCTPtr->Timings.Speed = NBPtr->TechPtr->PrevSpeed;
+      NBPtr->DCTPtr->Timings.TargetSpeed = NBPtr->TechPtr->PrevSpeed;
+    }
+    FrequencyChangeSuccess = FALSE;
+  }
+
+  //Program F2x[1,0]90[ExitSelfRef]=1 for both DCTs.
+  //Wait until the hardware resets F2x[1, 0]90[ExitSelfRef]=0.
+  MemNBrdcstSetNb (NBPtr, BFExitSelfRef, 1);
+  MemNPollBitFieldNb (NBPtr, BFExitSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+  MemNBrdcstSetNb (NBPtr, BFDisDllShutdownSR, 0);
+
+  if (FrequencyChangeSuccess) {
+    NBPtr->FamilySpecificHook[AfterMemClkFreqChg] (NBPtr, NULL);
+
+    // Perform Phy Fence training and Phy comp init after frequency change
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+
+        // Phy fence programming
+        AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+        NBPtr->PhyFenceTraining (NBPtr);
+
+        // Phy compensation initialization
+        AGESA_TESTPOINT (TPProcMemPhyCompensation, &(NBPtr->MemPtr->StdHeader));
+        NBPtr->MemNInitPhyComp (NBPtr);
+        MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_SLEWRATE, ALL_DIMMS);
+      }
+    }
+
+    //======================================================================
+    // Calculate and program DRAM Timings at new frequency
+    //======================================================================
+    //
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+          if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+            // if chip select present
+            if (!(TechPtr->TechnologySpecificHook[LrdimmSendAllMRCmds] (TechPtr, &ChipSel))) {
+              TechPtr->SendAllMRCmds (TechPtr, ChipSel);
+            }
+          }
+        }
+        // Wait 512 clocks for DLL-relock
+        MemNWaitXMemClksNb (NBPtr, 512);
+      }
+    }
+  }
+
+  // Restore MMIO setting
+  LibAmdMsrWrite (MSR_MMIO_Cfg_Base, &OrgMMIOCfgBase, &(NBPtr->MemPtr->StdHeader));
+
+  MemFInitTableDrive (NBPtr, MTAfterFreqChg);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function change MemClk frequency to the value that is specified by DCTPtr->Timings.Speed
+ *  for UNB.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNChangeFrequencyUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  UINT8 Dct;
+  UINT8 ChipSel;
+  UINT16 FinalPllLockTime;
+  BOOLEAN FrequencyChangeSuccess;
+  UINT64  OrgMMIOCfgBase;
+  UINT64  NewMMIOCfgBase;
+
+  TechPtr = NBPtr->TechPtr;
+
+  // Disable MMIO to prevent speculative DRAM reads during self refresh
+  LibAmdMsrRead (MSR_MMIO_Cfg_Base, &OrgMMIOCfgBase, &(NBPtr->MemPtr->StdHeader));
+  NewMMIOCfgBase = OrgMMIOCfgBase & (~(BIT0));
+  LibAmdMsrWrite (MSR_MMIO_Cfg_Base, &NewMMIOCfgBase, &(NBPtr->MemPtr->StdHeader));
+
+  MemNBrdcstSetNb (NBPtr, BFDisDllShutdownSR, 1);
+
+  //Program F2x[1,0]90[EnterSelfRefresh]=1.
+  //Wait until the hardware resets F2x[1,0]90[EnterSelfRefresh]=0.
+  MemNBrdcstSetNb (NBPtr, BFEnterSelfRef, 1);
+  MemNPollBitFieldNb (NBPtr, BFEnterSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+
+  if (NBPtr->ChangeNbFrequency (NBPtr)) {
+    // Reprogram Twr, Tcwl, and Tcl based on the new MEMCLK frequency.
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        TechPtr->AutoCycTiming (TechPtr);
+        if (!MemNPlatformSpecUnb (NBPtr)) {
+          IDS_ERROR_TRAP;
+        }
+      }
+    }
+
+    // 1. Program PllLockTime to Family-specific value
+    MemNBrdcstSetNb (NBPtr, BFPllLockTime, NBPtr->FreqChangeParam->PllLockTimeDefault);
+
+    // 2. Program D18F2x[1,0]94[MemClkFreqVal] = 0.
+    MemNBrdcstSetNb (NBPtr, BFMemClkFreqVal, 0);
+
+    // 3. Program D18F2x[1,0]94[MemClkFreq] to the desired DRAM frequency.
+    MemNBrdcstSetNb (NBPtr, BFMemClkFreq, NBPtr->GetMemClkFreqId (NBPtr, NBPtr->DCTPtr->Timings.Speed));
+
+    // 4. Program D18F2x[1,0]F4_x30[DbeGskFifoNumerator] and D18F2x[1,0]F4_x31[DbeGskFifoDenominator].
+    // 5. Program D18F2x[1,0]F4_x32[DataTxFifoSchedDlyNegSlot1, DataTxFifoSchedDlySlot1,
+    // DataTxFifoSchedDlyNegSlot0, DataTxFifoSchedDlySlot0]. See 2.10.3.2.2.1 [DCT Transmit Fifo Schedule
+    // Delay Programming].
+    // 6. D18F2x[1,0]78[RdPtrInit] = IF (D18F2x[1,0]94[MemClkFreq] >= 667 MHz) THEN 7 ELSE 8 ENDIF (Llano)
+    //                                                                         THEN 2 ELSE 3 ENDIF (Ontario)
+    NBPtr->ProgramNbPsDependentRegs (NBPtr);
+
+    IDS_OPTION_HOOK (IDS_BEFORE_MEM_FREQ_CHG, NBPtr, &(NBPtr->MemPtr->StdHeader));
+    // 7. Program D18F2x[1,0]94[MemClkFreqVal] = 1.
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if ((NBPtr->DCTPtr->Timings.DctMemSize != 0)) {
+        MemNSetBitFieldNb (NBPtr, BFMemClkFreqVal, 1);
+        MemNPollBitFieldNb (NBPtr, BFFreqChgInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+      }
+    }
+    FinalPllLockTime = 0xF;
+    NBPtr->FamilySpecificHook[AfterMemClkFreqVal] (NBPtr, &FinalPllLockTime);
+
+    // 8. IF (D18F2x[1,0]9C_x0D0F_E00A[CsrPhySrPllPdMode]==0) THEN program
+    // D18F2x[1,0]9C_x0D0F_E006[PllLockTime] = 0Fh.
+    if (!NBPtr->IsSupported[CsrPhyPllPdEn]) {
+      MemNBrdcstSetNb (NBPtr, BFPllLockTime, FinalPllLockTime);
+    }
+
+    FrequencyChangeSuccess = TRUE;
+  } else {
+    // If NB frequency cannot be updated, use the current speed as the target speed
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      NBPtr->DCTPtr->Timings.Speed = NBPtr->TechPtr->PrevSpeed;
+      NBPtr->DCTPtr->Timings.TargetSpeed = NBPtr->TechPtr->PrevSpeed;
+    }
+    FrequencyChangeSuccess = FALSE;
+  }
+
+  if (FrequencyChangeSuccess) {
+    // Perform Phy Fence training and Phy comp init after frequency change
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+
+        // Phy fence programming
+        AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+        NBPtr->PhyFenceTraining (NBPtr);
+
+        // Phy compensation initialization
+        AGESA_TESTPOINT (TPProcMemPhyCompensation, &(NBPtr->MemPtr->StdHeader));
+        NBPtr->MemNInitPhyComp (NBPtr);
+        MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_SLEWRATE, ALL_DIMMS);
+      }
+    }
+  }
+
+  //Program F2x[1,0]90[ExitSelfRef]=1 for both DCTs.
+  //Wait until the hardware resets F2x[1, 0]90[ExitSelfRef]=0.
+  MemNBrdcstSetNb (NBPtr, BFExitSelfRef, 1);
+  MemNPollBitFieldNb (NBPtr, BFExitSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+  if (NBPtr->IsSupported[SetDllShutDown]) {
+    MemNBrdcstSetNb (NBPtr, BFDisDllShutdownSR, 0);
+  }
+
+  if (FrequencyChangeSuccess) {
+    NBPtr->FamilySpecificHook[AfterMemClkFreqChg] (NBPtr, NULL);
+
+    //======================================================================
+    // Calculate and program DRAM Timings at new frequency
+    //======================================================================
+    //
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+          if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+            // if chip select present
+            if (!(TechPtr->TechnologySpecificHook[LrdimmSendAllMRCmds] (TechPtr, &ChipSel))) {
+              TechPtr->SendAllMRCmds (TechPtr, ChipSel);
+            }
+          }
+        }
+        // Wait 512 clocks for DLL-relock
+        MemNWaitXMemClksNb (NBPtr, 512);
+      }
+    }
+  }
+
+  // Restore MMIO setting
+  LibAmdMsrWrite (MSR_MMIO_Cfg_Base, &OrgMMIOCfgBase, &(NBPtr->MemPtr->StdHeader));
+
+  MemFInitTableDrive (NBPtr, MTAfterFreqChg);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function calculates and programs NB P-state dependent registers
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNProgramNbPstateDependentRegistersUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 RdPtrInit;
+
+  RdPtrInit = (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) ? 6 : 4;
+  MemNBrdcstSetNb (NBPtr, BFRdPtrInit, RdPtrInit);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tRdPtr: %d\n", RdPtrInit);
+
+  MemFInitTableDrive (NBPtr, MTAfterNbPstateChange);
+
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+    RdPtrInit = (UINT8) MemNGetBitFieldNb (NBPtr, BFRdPtrInit);
+  );
+
+  switch (RdPtrInit) {
+  case 4:
+    if (MemNGetBitFieldNb (NBPtr, BFNbPsSel) == 0) {
+      MemNBrdcstSetNb (NBPtr, BFDataTxFifoWrDly, 2);
+    } else {
+      MemNBrdcstSetNb (NBPtr, BFDataTxFifoWrDly, 1);
+    }
+    break;
+  case 5:
+    MemNBrdcstSetNb (NBPtr, BFDataTxFifoWrDly, 1);
+    break;
+  case 6:
+    MemNBrdcstSetNb (NBPtr, BFDataTxFifoWrDly, 0);
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+
+  NBPtr->FamilySpecificHook[OverrideDataTxFifoWrDly] (NBPtr, NBPtr);
+  IDS_OPTION_HOOK (IDS_NBPS_REG_OVERRIDE, NBPtr, &NBPtr->MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+CONST UINT8 PllDivTab[] = {0, 0, 0, 2, 3, 3, 2, 3};
+CONST UINT8 PllMultTab[] = {0, 0, 0, 16, 32, 40, 32, 56};
+
+/**
+ *
+ *  This function calculates and programs NB P-state dependent registers
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNProgramNbPstateDependentRegistersClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 i;
+  UINT8 Dct;
+  UINT8 NclkFid;
+  UINT16 MemClkDid;
+  UINT8 PllMult;
+  UINT8 NclkDiv;
+  UINT8 RdPtrInitMin;
+  UINT8 RdPtrInit;
+  UINT32 NclkPeriod;
+  UINT32 MemClkPeriod;
+  INT32 PartialSum2x;
+  INT32 PartialSumSlotI2x;
+  INT32 RdPtrInitRmdr2x;
+  INT32 TDataProp;
+  UINT8 NbPstate;
+  UINT8 SlowMode;
+
+  NclkFid = (UINT8) (MemNGetBitFieldNb (NBPtr, BFMainPllOpFreqId) + 0x10);  // NclkFid is in 100MHz
+
+  MemClkDid = PllDivTab[NBPtr->DCTPtr->Timings.Speed / 133];
+  NBPtr->FamilySpecificHook[OverridePllDiv] (NBPtr, &MemClkDid);
+  PllMult = PllMultTab[NBPtr->DCTPtr->Timings.Speed / 133];
+  NBPtr->FamilySpecificHook[OverridePllMult] (NBPtr, &PllMult);
+
+  if (NBPtr->NbFreqChgState == 2) {
+    MemNSetBitFieldNb (NBPtr, BFNbPsCsrAccSel, 1);
+    MemNSetBitFieldNb (NBPtr, BFNbPsDbgEn, 1);
+    NclkDiv = (UINT8) MemNGetBitFieldNb (NBPtr, BFNbPs1NclkDiv);
+    // Divisors less than 8 are undefined.  Maybe the CPU does not support NB P-states.
+    if (NclkDiv < 8) {
+      // Set a dummy divisor to prevent divide by zero exception below.
+      NclkDiv = 8;
+    }
+    NbPstate = 1;
+  } else {
+    NclkDiv = (UINT8) MemNGetBitFieldNb (NBPtr, BFNbPs0NclkDiv);
+    NbPstate = 0;
+  }
+  NclkPeriod = (2500 * NclkDiv) / NclkFid;  // (1,000,000 * 0.25 * NclkDiv) / (NclkFid * 100MHz) = ps
+  MemClkPeriod = 1000000 / NBPtr->DCTPtr->Timings.Speed;
+  NBPtr->NBClkFreq = ((UINT32) NclkFid * 400) / NclkDiv;
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\tNB P%d  Freq: %dMHz\n", NbPstate, NBPtr->NBClkFreq);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClk Freq: %dMHz\n", NBPtr->DCTPtr->Timings.Speed);
+  // D18F2x[1,0]78[RdPtrInit] = IF (D18F2x[1,0]94[MemClkFreq] >= 667 MHz) THEN 7 ELSE 8 ENDIF (Llano)
+  //                                                                      THEN 2 ELSE 3 ENDIF (Ontario)
+  RdPtrInit = RdPtrInitMin = (NBPtr->DCTPtr->Timings.Speed >= DDR1333_FREQUENCY) ? NBPtr->FreqChangeParam->RdPtrInit667orHigher : NBPtr->FreqChangeParam->RdPtrInitLower667;
+  NBPtr->FamilySpecificHook[AdjustRdPtrInit] (NBPtr, &RdPtrInit);
+  MemNBrdcstSetNb (NBPtr, BFRdPtrInit, RdPtrInit);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tRdPtr: %d\n", RdPtrInit);
+
+  // Program D18F2x[1,0]F4_x30[DbeGskFifoNumerator] and D18F2x[1,0]F4_x31[DbeGskFifoDenominator].
+  MemNBrdcstSetNb (NBPtr, BFDbeGskFifoNumerator, NclkFid * MemClkDid * 16);
+  MemNBrdcstSetNb (NBPtr, BFDbeGskFifoDenominator, PllMult * NclkDiv);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tDbeGskFifoNumerator: %d\n", NclkFid * MemClkDid * 16);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tDbeGskFifoDenominator: %d\n", PllMult * NclkDiv);
+
+  // Program D18F2x[1,0]F4_x32[DataTxFifoSchedDlyNegSlot1, DataTxFifoSchedDlySlot1,
+  // DataTxFifoSchedDlyNegSlot0, DataTxFifoSchedDlySlot0].
+  //   PartialSum = ((7 * NclkPeriod) + (1.5 * MemClkPeriod) + 520ps)*MemClkFrequency - tCWL -
+  //   CmdSetup - PtrSeparation - 1. (Llano)
+  //   PartialSum = ((5 * NclkPeriod) + MemClkPeriod) + 520ps)*MemClkFrequency - tCWL -
+  //   CmdSetup - PtrSeparation - 1. (Ontario)
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      PartialSum2x = NBPtr->FreqChangeParam->NclkPeriodMul2x * NclkPeriod;
+      PartialSum2x += NBPtr->FreqChangeParam->MemClkPeriodMul2x * MemClkPeriod;
+      PartialSum2x += 520 * 2;
+
+      // PtrSeparation = ((16 + RdPtrInitMin - D18F2x[1,0]78[RdPtrInit]) MOD 16)/2 + RdPtrInitRmdr
+      // If (D18F2x[1,0]94[MemClkFreq] >= 800 MHz)
+      // then RdPtrInitRmdr = (((4.5 * MemClkPeriod) - 990ps) MOD MemClkPeriod)/MemClkPeriod
+      // else RdPtrInitRmdr = (((4.5 * MemClkPeriod) - 1466ps) MOD MemClkPeriod)/MemClkPeriod
+      TDataProp = (NBPtr->DCTPtr->Timings.Speed >= DDR1600_FREQUENCY) ?
+                  NBPtr->FreqChangeParam->TDataProp800orHigher : NBPtr->FreqChangeParam->TDataPropLower800;
+      RdPtrInitRmdr2x = ((NBPtr->FreqChangeParam->SyncTimeMul4x * MemClkPeriod) / 2) - 2 * (TDataProp + 520);
+      RdPtrInitRmdr2x %= MemClkPeriod;
+      PartialSum2x -= ((16 + RdPtrInitMin - RdPtrInit) % 16) * MemClkPeriod + RdPtrInitRmdr2x;
+
+      // Convert PartialSum2x to PCLK
+      PartialSum2x = (PartialSum2x + MemClkPeriod - 1) / MemClkPeriod;  // round-up here
+      PartialSum2x -= 2 * (MemNGetBitFieldNb (NBPtr, BFTcwl) + 5);
+      if ((MemNGetBitFieldNb (NBPtr, BFAddrTmgControl) & 0x0202020) == 0) {
+        PartialSum2x -= 1;
+      } else {
+        PartialSum2x -= 2;
+      }
+      PartialSum2x -= 2;
+
+      // If PartialSumSlotN is positive:
+      //   DataTxFifoSchedDlySlotN=CEIL(PartialSumSlotN).
+      //   DataTxFifoSchedDlyNegSlotN=0.
+      // Else if PartialSumSlotN is negative:
+      //   DataTxFifoSchedDlySlotN=ABS(CEIL(PartialSumSlotN*MemClkPeriod/NclkPeriod)).
+      //   DataTxFifoSchedDlyNegSlotN=1.
+      for (i = 0; i < 2; i++) {
+        PartialSumSlotI2x = PartialSum2x;
+        SlowMode = (UINT8) MemNGetBitFieldNb (NBPtr, BFSlowAccessMode);
+        if ((i == 0) && (SlowMode == 0)) {
+          PartialSumSlotI2x += 2;
+        }
+        if (NBPtr->IsSupported[SchedDlySlot1Extra] && (i == 1) && (SlowMode != 0)) {
+          PartialSumSlotI2x -= 2;
+        }
+        if (PartialSumSlotI2x > 0) {
+          MemNSetBitFieldNb (NBPtr, BFDataTxFifoSchedDlyNegSlot0 + i, 0);
+          MemNSetBitFieldNb (NBPtr, BFDataTxFifoSchedDlySlot0 + i, (PartialSumSlotI2x + 1) / 2);
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t\tDataTxFifoSchedDlySlot%d: %d\n", i, (PartialSumSlotI2x + 1) / 2);
+        } else {
+          MemNSetBitFieldNb (NBPtr, BFDataTxFifoSchedDlyNegSlot0 + i, 1);
+          PartialSumSlotI2x = ((-PartialSumSlotI2x) * MemClkPeriod) / (2 * NclkPeriod);
+          MemNSetBitFieldNb (NBPtr, BFDataTxFifoSchedDlySlot0 + i, PartialSumSlotI2x);
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t\tDataTxFifoSchedDlySlot%d: -%d\n", i, PartialSumSlotI2x);
+        }
+      }
+
+      // Set ProcOdtAdv
+      if ((NBPtr->DCTPtr->Timings.Speed <= DDR1333_FREQUENCY) &&
+          ((!(NBPtr->IsSupported[EnProcOdtAdvForUDIMM])) || (NBPtr->ChannelPtr->SODimmPresent != 0))) {
+        MemNSetBitFieldNb (NBPtr, BFProcOdtAdv, 0);
+      } else {
+        MemNSetBitFieldNb (NBPtr, BFProcOdtAdv, 0x4000);
+      }
+    }
+  }
+
+  MemFInitTableDrive (NBPtr, MTAfterNbPstateChange);
+  if (NBPtr->NbFreqChgState == 2) {
+    MemNSetBitFieldNb (NBPtr, BFNbPsDbgEn, 0);
+    MemNSetBitFieldNb (NBPtr, BFNbPsCsrAccSel, 0);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the total of sync components for Max Read Latency calculation
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return      Total in ps
+ */
+
+UINT32
+MemNTotalSyncComponentsClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 P;
+  UINT32 T;
+  UINT8  RdPtrInitMin;
+  UINT8  RdPtrInit;
+  UINT32 AddrTmgCtl;
+  UINT8  DbeGskMemClkAlignMode;
+  UINT32 MemClkPeriod;
+
+  // P = P + ((16 + RdPtrInitMin - D18F2x[1,0]78[RdPtrInit]) MOD 16)
+  RdPtrInitMin = (NBPtr->DCTPtr->Timings.Speed >= DDR1333_FREQUENCY) ? NBPtr->FreqChangeParam->RdPtrInit667orHigher : NBPtr->FreqChangeParam->RdPtrInitLower667;
+  RdPtrInit = (UINT8) MemNGetBitFieldNb (NBPtr, BFRdPtrInit);
+  P = (16 + RdPtrInitMin - RdPtrInit) % 16;
+
+  // IF (AddrCmdSetup != CkeSetup) THEN P = P + 1
+  AddrTmgCtl = MemNGetBitFieldNb (NBPtr, BFAddrTmgControl);
+  if (((AddrTmgCtl >> 16) & 0x20) != (AddrTmgCtl & 0x20)) {
+    P += 1;
+  }
+
+  // IF (DbeGskMemClkAlignMode==01b || (DbeGskMemClkAlignMode==00b && !(AddrCmdSetup==CsOdtSetup==CkeSetup)))
+  // THEN P = P + 1
+  DbeGskMemClkAlignMode = (UINT8) MemNGetBitFieldNb (NBPtr, BFDbeGskMemClkAlignMode);
+  if ((DbeGskMemClkAlignMode == 1) || ((DbeGskMemClkAlignMode == 0) &&
+      !((((AddrTmgCtl >> 16) & 0x20) == (AddrTmgCtl & 0x20)) && (((AddrTmgCtl >> 8) & 0x20) == (AddrTmgCtl & 0x20))))) {
+    P += 1;
+  }
+
+  // IF (SlowAccessMode==1) THEN P = P + 2
+  if (MemNGetBitFieldNb (NBPtr, BFSlowAccessMode) == 1) {
+    P += 2;
+  }
+
+  // P = P + 2
+  P += 2;
+  T = 0;
+
+  // If (AddrCmdSetup==0 && CsOdtSetup==0 && CkeSetup==0)
+  // then P = P + 1
+  // else P = P + 2
+  if ((AddrTmgCtl & 0x0202020) == 0) {
+    P += 1;
+  } else {
+    P += 2;
+  }
+
+  // P = P + (2 * (D18F2x[1,0]88[Tcl] clocks - 1))
+  P += 2 * (NBPtr->DCTPtr->Timings.CasL - 1);
+
+  // If (DisCutThroughMode==0)
+  // then P = P + 3
+  // else P = P + 7
+  if (MemNGetBitFieldNb (NBPtr, BFDisCutThroughMode) == 0) {
+    P += 3;
+  } else {
+    P += 7;
+  }
+
+  MemClkPeriod = 1000000 / NBPtr->DCTPtr->Timings.Speed;
+  return (((P * MemClkPeriod + 1) / 2) + T);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets up phy power saving for client NB
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNPhyPowerSavingClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  // 4. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]13[DllDisEarlyU] = 1b.
+  // 5. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]13[DllDisEarlyL] = 1b.
+  // 6. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]13[7:4] = 1010b.
+  MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F13Bit0to7, 0xA3);
+  // 7. Program D18F2x[1,0]9C_x0D0F_812F[7, 5, 0] = {1b, 1b, 1b} to disable unused PAR and A[17:16] pins.
+  MemNSetBitFieldNb (NBPtr, BFAddrCmdTri, MemNGetBitFieldNb (NBPtr, BFAddrCmdTri) | 0xA1);
+  // 8. Program D18F2x[1,0]9C_x0D0F_C000[LowPowerDrvStrengthEn] = 1.
+  if (!NBPtr->FamilySpecificHook[DisLowPwrDrvStr] (NBPtr, NULL)) {
+    MemNSetBitFieldNb (NBPtr, BFReserved00C, 0x100);
+  }
+  // 9. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]10[EnRxPadStandby]= IF (D18F2x[1,0]94[MemClkFreq] <=
+  //    800 MHz) THEN 1 ELSE 0 ENDIF.
+  MemNSetBitFieldNb (NBPtr, BFEnRxPadStandby, (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) ? 0x1000 : 0);
+  // 10. Program D18F2x[1,0]9C_x0000_000D as follows:
+  //    TxMaxDurDllNoLock/RxMaxDurDllNoLock = 7h.
+  MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 7);
+  MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 7);
+  //    TxCPUpdPeriod/RxCPUpdPeriod = 011b.
+  MemNSetBitFieldNb (NBPtr, BFTxCPUpdPeriod, 3);
+  MemNSetBitFieldNb (NBPtr, BFRxCPUpdPeriod, 3);
+  //    TxDLLWakeupTime/RxDLLWakeupTime = 11b.
+  MemNSetBitFieldNb (NBPtr, BFTxDLLWakeupTime, 3);
+  MemNSetBitFieldNb (NBPtr, BFRxDLLWakeupTime, 3);
+
+  IDS_OPTION_HOOK (IDS_PHY_DLL_STANDBY_CTRL, NBPtr, &NBPtr->MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets up phy power saving for UNB
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNPhyPowerSavingUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT16 MixedX4AndX8Dimms;
+
+  // 4. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyU] = 1b.
+  // 5. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyL] = 1b.
+  MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F13, MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0F13) | 3);
+  // 6. D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][RxDqsUDllPowerDown] = (D18F2x90_dct[1:0][X4Dimm]!=0).
+  MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F13, MemNGetBitFieldNb (NBPtr, BFX4Dimm) == 0 ? (MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0F13) | 0x80) : (MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0F13) & 0xFF7F));
+  // 7. D18F2x9C_x0D0F_812F_dct[1:0][PARTri] = ~D18F2x90_dct[1:0][ParEn].
+  MemNSetBitFieldNb (NBPtr, BFAddrCmdTri, MemNGetBitFieldNb (NBPtr, BFParEn) == 0 ? (MemNGetBitFieldNb (NBPtr, BFAddrCmdTri) | 1) : (MemNGetBitFieldNb (NBPtr, BFAddrCmdTri) & 0xFFFE));
+  // 8. D18F2x9C_x0D0F_812F_dct[1:0][Add17Tri, Add16Tri] = {1b, 1b}
+  MemNSetBitFieldNb (NBPtr, BFAddrCmdTri, MemNGetBitFieldNb (NBPtr, BFAddrCmdTri) | 0xA0);
+  // 9. IF (D18F2x94_dct[1:0][MemClkFreq] <= 800 MHz && ~(mixed channel of x4 and x8 DIMMs)) THEN
+  //    Program D18F2x9C_x0D0F_0[F,8:0]10_dct[1:0][EnRxPadStandby] = 1.
+  //    ELSE
+  //    Program D18F2x9C_x0D0F_0[F,8:0]10_dct[1:0][EnRxPadStandby] = 0.
+  //    ENDIF.
+  MixedX4AndX8Dimms = NBPtr->DCTPtr->Timings.Dimmx4Present != 0 && NBPtr->DCTPtr->Timings.Dimmx8Present != 0;
+  MemNSetBitFieldNb (NBPtr, BFEnRxPadStandby, (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) && !MixedX4AndX8Dimms ? 0x1000 : 0);
+  // 10. IF (~(mixed channel of x4 and x8 DIMMs)) THEN
+  if (MixedX4AndX8Dimms == FALSE) {
+  //    Program D18F2x9C_x0000_000D_dct[1:0] as follows:
+  //    TxMaxDurDllNoLock = RxMaxDurDllNoLock = 7h.
+    MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 7);
+    MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 7);
+  //    TxCPUpdPeriod = RxCPUpdPeriod = 011b.
+    MemNSetBitFieldNb (NBPtr, BFTxCPUpdPeriod, 3);
+    MemNSetBitFieldNb (NBPtr, BFRxCPUpdPeriod, 3);
+  //    TxDLLWakeupTime = RxDLLWakeupTime = 11b.
+    MemNSetBitFieldNb (NBPtr, BFTxDLLWakeupTime, 3);
+    MemNSetBitFieldNb (NBPtr, BFRxDLLWakeupTime, 3);
+  } else {
+  //    ELSE
+  //    Program D18F2x9C_x0000_000D_dct[1:0][TxMaxDurDllNoLock, RxMaxDurDllNoLock, TxCPUpdPeriod,
+  //    RxCPUpdPeriod, TxDLLWakeupTime, RxDLLWakeupTime] = {0, 0, 0, 0, 0, 0}.
+    MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 0);
+    MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 0);
+    MemNSetBitFieldNb (NBPtr, BFTxCPUpdPeriod, 0);
+    MemNSetBitFieldNb (NBPtr, BFRxCPUpdPeriod, 0);
+    MemNSetBitFieldNb (NBPtr, BFTxDLLWakeupTime, 0);
+    MemNSetBitFieldNb (NBPtr, BFRxDLLWakeupTime, 0);
+  }
+  //  11. Program D18F2x9C_x0D0F_0[F,8:0]30_dct[1:0][PwrDn] to disable unused ECC byte lane.
+  if (NBPtr->IsSupported[CheckEccDLLPwrDnConfig]) {
+    if (!NBPtr->MCTPtr->Status[SbEccDimms]) {
+      MemNSetBitFieldNb (NBPtr, BFEccDLLPwrDnConf, 0x0010);
+    }
+  }
+
+  //  12. Program D18F2x9C_x0D0F_0[F,8:0]04_dct[1:0][TriDM] = IF (LRDIMM & (D18F2x90_dct[1:0][X4Dimm] == 0)) THEN 1 ELSE 0.
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    MemNSetBitFieldNb (NBPtr, BFDataByteDMConf, (MemNGetBitFieldNb (NBPtr, BFX4Dimm) == 0) ? 0x2000 : 0);
+  }
+
+  IDS_OPTION_HOOK (IDS_PHY_DLL_STANDBY_CTRL, NBPtr, &NBPtr->MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function overrides the ASR and SRT value in MRS command
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNSetASRSRTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 MrsAddress;
+  UINT8 Dimm;
+  UINT8 *SpdBufferPtr;
+
+  // Look for MR2
+  if (NBPtr->GetBitField (NBPtr, BFMrsBank) == 2) {
+    MrsAddress = NBPtr->GetBitField (NBPtr, BFMrsAddress);
+    // Clear A6(ASR) and A7(SRT)
+    MrsAddress &= (UINT32) ~0xC0;
+    Dimm = (UINT8) (NBPtr->GetBitField (NBPtr, BFMrsChipSel) >> 1);
+    // Make sure we access SPD of the second logical dimm of QR dimm correctly
+    if ((Dimm >= 2) && ((NBPtr->ChannelPtr->DimmQrPresent & (UINT8) (1 << Dimm)) != 0)) {
+      Dimm -= 2;
+    }
+    if (NBPtr->TechPtr->GetDimmSpdBuffer (NBPtr->TechPtr, &SpdBufferPtr, Dimm)) {
+      // Bit 2 is ASR
+      if (SpdBufferPtr[THERMAL_OPT] & 0x4) {
+        // when ASR is 1, set SRT to 0
+        MrsAddress |= 0x40;
+      } else {
+        // Set SRT based on bit on of thermal byte
+        MrsAddress |= ((SpdBufferPtr[THERMAL_OPT] & 1) << 7);
+      }
+      NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function changes NB frequency as below:
+ *     NBP0-DDR800 -> NBP0-DDR1066 -> ... -> NBP0-DDRTarget -> NBP1-DDRTarget -> NBP0-DDRTarget
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+MemNChangeNbFrequencyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN Status;
+
+  Status = FALSE;
+
+  // State machine to change NB frequency and NB Pstate
+  switch (NBPtr->NbFreqChgState) {
+  case 0:
+    // Starting up by not changing NB P state, but only updating NB frequency based on current MemClk frequency
+    Status = NBPtr->ChangeNbFrequencyWrap (NBPtr, 0);
+    ASSERT (Status);
+
+    if (NBPtr->DCTPtr->Timings.Speed == NBPtr->DCTPtr->Timings.TargetSpeed) {
+      // When MemClk has been ramped up to its max, transition to next state, which changes NBPstate to P1
+      NBPtr->NbFreqChgState = 1;
+      IDS_OPTION_HOOK (IDS_NB_PSTATE_DIDVID, NBPtr, &(NBPtr->MemPtr->StdHeader));
+    }
+    break;
+
+  case 1:
+    // Clear ForceCasToSlot0 after MaxRdLatency training is completed for NB-P0
+    MemNBrdcstSetNb (NBPtr, BFForceCasToSlot0, 0);
+
+    // Next state would be to change NBPstate back to P0
+    NBPtr->NbFreqChgState = 2;
+
+    // Update NB freq dependent registers
+    NBPtr->ProgramNbPsDependentRegs (NBPtr);
+
+    // Change NB P-State to NBP1 for MaxRdLat training
+    if (NBPtr->ChangeNbFrequencyWrap (NBPtr, 1)) {
+      // Enable cut through mode for NB P1
+      MemNBrdcstSetNb (NBPtr, BFDisCutThroughMode, 0);
+
+      // Return TRUE to repeat MaxRdLat training
+      Status = TRUE;
+
+    } else {
+      // If transition to NB-P1 fails, transition to exit state machine
+      NBPtr->NbFreqChgState = 3;
+    }
+    break;
+
+  case 2:
+    // Clear ForceCasToSlot0 after MaxRdLatency training is completed for NB-P1
+    MemNBrdcstSetNb (NBPtr, BFForceCasToSlot0, 0);
+
+    // Change NB P-State back to NBP0
+    Status = NBPtr->ChangeNbFrequencyWrap (NBPtr, 0);
+    ASSERT (Status);
+
+    // Return FALSE to get out of MaxRdLat training loop
+    Status = FALSE;
+
+    // Exit state machine
+    NBPtr->NbFreqChgState = 3;
+    break;
+
+  default:
+    break;
+  }
+
+  return Status;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function programs registers before phy fence training for CNB
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNBeforePhyFenceTrainingClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClkAlign=0\n");
+  MemNBrdcstSetNb (NBPtr, BFDbeGskMemClkAlignMode, 0);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tEnDramInit = 1 for both DCTs\n");
+  MemNBrdcstSetNb (NBPtr, BFEnDramInit, 1);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function changes NB frequency foras below:
+ *     NBP0-DDR800 -> NBP0-DDR1066 -> ... -> NBP0-DDRTarget -> NBP1-DDRTarget -> NBP2-DDRTarget -> NBP3-DDRTarget -> NBP0-DDRTarget
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+MemNChangeNbFrequencyUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN Status;
+
+  Status = FALSE;
+
+  // State machine to change NB frequency and NB Pstate
+  switch (NBPtr->NbFreqChgState) {
+  case 0:
+    // Do not change NB Pstate, just to save initial NB Pstate value
+    Status = NBPtr->ChangeNbFrequencyWrap (NBPtr, 0);
+    if (NBPtr->DCTPtr->Timings.Speed == NBPtr->DCTPtr->Timings.TargetSpeed) {
+      // When MemClk has been ramped up to its max, transition to next state, which changes NBPstate to P1
+      NBPtr->NbFreqChgState = 1;
+      IDS_OPTION_HOOK (IDS_NB_PSTATE_DIDVID, NBPtr, &(NBPtr->MemPtr->StdHeader));
+    }
+    break;
+
+  case 1:
+  case 2:
+  case 3:
+    // Change NB P-State to NBP1 for MaxRdLat training
+    if (NBPtr->ChangeNbFrequencyWrap (NBPtr, NBPtr->NbFreqChgState)) {
+      // Next state is to try all NBPstates
+      NBPtr->NbFreqChgState++;
+
+      // Return TRUE to repeat MaxRdLat training
+      Status = TRUE;
+    } else {
+      // If transition to any NBPs fails, transition to exit state machine
+      NBPtr->NbFreqChgState = 4;
+    }
+    break;
+
+  case 4:
+    // Change NB P-State back to NBP0
+    Status = NBPtr->ChangeNbFrequencyWrap (NBPtr, 0);
+    ASSERT (Status);
+
+    // Return FALSE to get out of MaxRdLat training loop
+    Status = FALSE;
+
+    // Exit state machine
+    NBPtr->NbFreqChgState = 5;
+    break;
+
+  default:
+    break;
+  }
+
+  return Status;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets "Dram Term" value from data structure
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       ChipSel  - Targeted chipsel
+ *
+ *     @return       Dram Term value
+ */
+UINT8
+MemNGetDramTermNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSel
+  )
+{
+  UINT8 DramTerm;
+
+  if ((NBPtr->ChannelPtr->DimmQrPresent & ((UINT16) (1 << (ChipSel >> 1)))) != 0) {
+    DramTerm = NBPtr->PsPtr->QR_DramTerm;
+  } else {
+    DramTerm = NBPtr->PsPtr->DramTerm;
+  }
+
+  return DramTerm;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets "Dram Term" value from data structure for Unb
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       ChipSel  - Targeted chipsel
+ *
+ *     @return       Dram Term value
+ */
+UINT8
+MemNGetDramTermTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSel
+  )
+{
+  UINT8 RttNom;
+  RttNom = NBPtr->PsPtr->RttNom[ChipSel];
+  IDS_OPTION_HOOK (IDS_MEM_DRAM_TERM, &RttNom, &NBPtr->MemPtr->StdHeader);
+  return RttNom;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets "Dynamic Dram Term" value from data structure
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       ChipSel  - Targeted chipsel
+ *
+ *     @return       Dynamic Dram Term value
+ */
+UINT8
+MemNGetDynDramTermNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSel
+  )
+{
+  return (NBPtr->PsPtr->DynamicDramTerm);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets "Dynamic Dram Term" value from data structure
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       ChipSel  - Targeted chipsel
+ *
+ *     @return       Dynamic Dram Term value
+ */
+UINT8
+MemNGetDynDramTermTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSel
+  )
+{
+  UINT8 RttWr;
+  RttWr = NBPtr->PsPtr->RttWr[ChipSel];
+  IDS_OPTION_HOOK (IDS_MEM_DYN_DRAM_TERM, &RttWr, &NBPtr->MemPtr->StdHeader);
+  return RttWr;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns MR0[CL] value
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return       MR0[CL] value
+ */
+UINT32
+MemNGetMR0CLNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Tcl;
+  UINT32 Value32;
+
+  Tcl = (UINT8) MemNGetBitFieldNb (NBPtr, BFTcl);
+  Value32 = (UINT32) ((Tcl < 8) ? (Tcl << 4) : (((Tcl - 8) << 4) | 4));
+
+  return Value32;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns MR0[WR] value
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return       MR0[WR] value
+ */
+UINT32
+MemNGetMR0WRNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 Value32;
+
+  Value32 = MemNGetBitFieldNb (NBPtr, BFTwrDDR3) << 9;
+
+  return Value32;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns MR0[WR] value
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return       MR0[WR] value
+ */
+UINT32
+MemNGetMR0WRTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  return (UINT32) (NBPtr->PsPtr->MR0WR << 9);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns MR2[CWL] value
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return       MR0[CWL] value
+ */
+UINT32
+MemNGetMR2CWLNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 Value32;
+
+  Value32 = MemNGetBitFieldNb (NBPtr, BFTcwl) << 3;
+
+  return Value32;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function returns MR2[CWL] value for UNB
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return       MR0[CWL] value
+ */
+UINT32
+MemNGetMR2CWLUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 Value32;
+
+  Value32 = (MemNGetBitFieldNb (NBPtr, BFTcwl) - 5) << 3;
+
+  return Value32;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets Txp and Txpdll
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return       none
+ */
+VOID
+MemNSetTxpNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST UINT8 Txp[] = {0xFF, 0xFF, 3, 3, 4, 4, 5, 6, 7};
+  CONST UINT8 Txpdll[] = {0xFF, 0xFF, 0xA, 0xA, 0xD, 0x10, 0x14, 0x17, 0x1A};
+  UINT8 i;
+  UINT8 TxpVal;
+  UINT8 TxpdllVal;
+  UINT16 Speed;
+
+  Speed = NBPtr->DCTPtr->Timings.Speed;
+  i = (UINT8) ((Speed < DDR800_FREQUENCY) ? ((Speed / 66) - 3) : (Speed / 133));
+  ASSERT (i < sizeof (Txp));
+  ASSERT (i < sizeof (Txpdll));
+
+  TxpdllVal = Txpdll[i];
+
+  if ((NBPtr->MCTPtr->Status[SbLrdimms] || NBPtr->MCTPtr->Status[SbRegistered]) &&
+      ((NBPtr->DCTPtr->Timings.Speed == DDR667_FREQUENCY) || (NBPtr->DCTPtr->Timings.Speed == DDR800_FREQUENCY)) &&
+      (NBPtr->RefPtr->DDR3Voltage == VOLT1_25)) {
+    TxpVal = 4;
+  } else {
+    TxpVal = Txp[i];
+  }
+
+  if (TxpVal != 0xFF) {
+    MemNSetBitFieldNb (NBPtr, BFTxp, TxpVal);
+  }
+  if (TxpdllVal != 0xFF) {
+    NBPtr->FamilySpecificHook[AdjustTxpdll] (NBPtr, &TxpdllVal);
+    MemNSetBitFieldNb (NBPtr, BFTxpdll, TxpdllVal);
+  }
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function adjust value of Txpdll to encoded value.
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNAdjustTxpdllClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  *(UINT8 *) OptParam -= 10;
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function is a wrapper to handle or switch NB Pstate for UNB
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]  *NBPstate - NB Pstate
+ *
+ *     @return          TRUE - Succeed
+ *     @return          FALSE - Fail
+ */
+
+BOOLEAN
+MemNChangeNbFrequencyWrapUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 NBPstate
+  )
+{
+  UINT8   TargetNbPs;
+  UINT32  FreqNumeratorInMHz;
+  UINT32  FreqDivisor;
+  UINT32  VoltageInuV;
+  UINT8   NbPstateMaxVal;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+  if (NBPtr->NbFreqChgState == 0) {
+    // While in state 0, keep NB Pstate at the highest supported
+    TargetNbPs = 0;
+    if (NBPtr->NbPsCtlReg == 0) {
+      // Save NbPsCtl register on the first run
+      NBPtr->NbPsCtlReg = MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg);
+    } else {
+      // Do not need to switch NB Pstate again if it is already at highest
+      return TRUE;
+    }
+  } else if (NBPtr->NbFreqChgState < 4) {
+    // While in other states, go to the next lower NB Pstate
+    TargetNbPs = (UINT8) MemNGetBitFieldNb (NBPtr, BFCurNbPstate) + 1;
+  } else {
+    // When done with training, release NB Pstate force by restoring NbPsCtl register
+    NBPtr->FamilySpecificHook[ReleaseNbPstate] (NBPtr, NBPtr);
+    IDS_HDT_CONSOLE (MEM_FLOW, "\tRelease NB Pstate force\n");
+    return TRUE;
+  }
+
+  // Make sure target NB Pstate is enabled, else find next enabled NB Pstate
+  GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &NBPtr->MemPtr->StdHeader);
+  for (; TargetNbPs < 4; TargetNbPs++) {
+    if (FamilySpecificServices->GetNbPstateInfo (FamilySpecificServices,
+                                                  NBPtr->MemPtr->PlatFormConfig,
+                                                  &NBPtr->PciAddr,
+                                                  (UINT32) TargetNbPs,
+                                                  &FreqNumeratorInMHz,
+                                                  &FreqDivisor,
+                                                  &VoltageInuV,
+                                                  &(NBPtr->MemPtr->StdHeader))) {
+      // Record NCLK speed
+      NBPtr->NBClkFreq = FreqNumeratorInMHz / FreqDivisor;
+      break;
+    }
+  }
+
+  if (TargetNbPs < 4) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\tNB P%d: %dMHz\n", TargetNbPs, NBPtr->NBClkFreq);
+
+    // 1.Program the configuration registers which contain multiple internal copies for each NB P-state. See
+    //   D18F1x10C[NbPsSel].
+    MemNSetBitFieldNb (NBPtr, BFNbPsSel, TargetNbPs);
+
+    // Check to see if NB P-states have been disabled.  @todo This should only be needed for
+    // bring up, but must be included in any releases that occur before NB P-state operation
+    // has been debugged/fixed.
+    if ((NBPtr->NbPsCtlReg & 0x00000003) != 0) {
+      // Set up RdPtrInit before transit to target NBPstate
+      if (TargetNbPs > 0) {
+        NBPtr->ProgramNbPsDependentRegs (NBPtr);
+      }
+      // 2.Program D18F5x170 to transition the NB P-state:
+      //   NbPstateLo = NbPstateMaxVal. (HW requires an intermediate transition to low)
+      //   SwNbPstateLoDis = NbPstateDisOnP0 = NbPstateThreshold = 0.
+      NbPstateMaxVal = (UINT8) MemNGetBitFieldNb (NBPtr, BFNbPstateMaxVal);
+      MemNSetBitFieldNb (NBPtr, BFNbPstateLo, NbPstateMaxVal);
+      MemNSetBitFieldNb (NBPtr, BFNbPstateCtlReg, MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg) & 0xFFFF91FF);
+
+      // 3.Wait for D18F5x174[CurNbPstate] to equal NbPstateLo.
+      MemNPollBitFieldNb (NBPtr, BFCurNbPstate, NbPstateMaxVal, PCI_ACCESS_TIMEOUT, TRUE);
+
+      // 4.Program D18F5x170 to force the NB P-state:
+      //   NbPstateHi = target NB P-state.
+      //   SwNbPstateLoDis = 1 (triggers the transition)
+      MemNSetBitFieldNb (NBPtr, BFNbPstateHi, TargetNbPs);
+      MemNSetBitFieldNb (NBPtr, BFSwNbPstateLoDis, 1);
+
+      // 5.Wait for D18F5x174[CurNbPstate] to equal the target NB P-state.
+      MemNPollBitFieldNb (NBPtr, BFCurNbPstate, TargetNbPs, PCI_ACCESS_TIMEOUT, TRUE);
+    }
+
+    // When NB frequency change succeeds, TSC rate may have changed.
+    // We need to update TSC rate
+    FamilySpecificServices->GetTscRate (FamilySpecificServices, &NBPtr->MemPtr->TscRate, &NBPtr->MemPtr->StdHeader);
+  } else {
+    // Cannot find a supported NB Pstate to switch to
+    // Release NB Pstate force by restoring NbPsCtl register
+    NBPtr->FamilySpecificHook[ReleaseNbPstate] (NBPtr, NBPtr);
+    IDS_HDT_CONSOLE (MEM_FLOW, "\tRelease NB Pstate force\n");
+    return FALSE;
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sends an MRS command for Unb
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSendMrsCmdUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemNSetASRSRTNb (NBPtr);
+  MemNSwapBitsUnb (NBPtr);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d MR%d %05x\n",
+              (MemNGetBitFieldNb (NBPtr, BFMrsChipSel) & 0x7),
+              (MemNGetBitFieldNb (NBPtr, BFMrsBank) & 0x7),
+              (MemNGetBitFieldNb (NBPtr, BFMrsAddress) & 0x3FFFF));
+
+  // 1.Set SendMrsCmd=1
+  MemNSetBitFieldNb (NBPtr, BFSendMrsCmd, 1);
+
+  // 2.Wait for SendMrsCmd=0
+  MemNPollBitFieldNb (NBPtr, BFSendMrsCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function returns MR0[CL] value with table driven support
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return       MR0[CL] value
+ */
+UINT32
+MemNGetMR0CLTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  return (UINT32) ((NBPtr->PsPtr->MR0CL31 << 4) | (NBPtr->PsPtr->MR0CL0 << 2));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     This function performs MaxRdLat training for slot 1
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  TestAddrRJ16 - Test address
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNSlot1MaxRdLatTrainClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *TestAddrRJ16
+  )
+{
+  UINT8  DummyBuffer[8];
+  UINT16 MaxLatDly;
+  UINT8  i;
+
+  // Perform slot1 specific training:
+  // A.Program D18F2x[1,0]78[SlotSel]=1. Force read CAS to fifo slot1 for training.
+  // B.Program D18F2x[1,0]78[MaxRdLatency] = TrainedMaxRdLatency. Set to last slot0 value that passed.
+  // C.Read the DIMM test addresses.
+  // D.Compare the values read against the pattern written.
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tTrain Slot 1: \n");
+  MemNSetBitFieldNb (NBPtr, BFSlotSel, 1);
+
+  MaxLatDly = (UINT16) (MemNGetBitFieldNb (NBPtr, BFMaxLatency) + 1);  // Add 1 to get back to the last passing value
+  MemNSetBitFieldNb (NBPtr, BFMaxLatency, MaxLatDly);
+
+  for (i = 0; i < 100; i++) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDly %3x", MaxLatDly);
+
+    NBPtr->ReadPattern (NBPtr, DummyBuffer, *(UINT32*)TestAddrRJ16, 6);
+
+    if (NBPtr->CompareTestPattern (NBPtr, DummyBuffer, DummyBuffer, 6 * 64) == 0xFFFF) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "  P");
+      break;
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+  }
+
+  if (i < 100) {
+    MemNSetBitFieldNb (NBPtr, BFSlot1ExtraClkEn, 0);
+  } else {
+    MemNSetBitFieldNb (NBPtr, BFSlot1ExtraClkEn, 1);
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFMaxSkipErrTrain, 0);
+
+  return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     This function programs dram power management timing related registers
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return    none
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNDramPowerMngTimingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  STATIC CONST UINT8 Tckesr[] = {4, 4, 5, 5, 6, 7, 2, 2};
+  UINT8 Tck;
+
+  // These timings are based on DDR3 spec
+  // Tcksrx = max(5 nCK, 10 ns)
+  Tck = (UINT8) MAX (5, (MemUnsToMemClk (NBPtr->DCTPtr->Timings.Speed, 10)));
+  MemNSetBitFieldNb (NBPtr, BFTcksrx, MIN (0xE, MAX (Tck, 2)));
+
+  // Tcksre = max(5 nCK, 10 ns)
+  MemNSetBitFieldNb (NBPtr, BFTcksre, MIN (0x27, MAX (Tck, 5)));
+
+  // Tckesr = tCKE(min) + 1 nCK
+  //                               tCKE(min)
+  // DDR-800   7,5ns = 3nCk     max(3nCK, 7.5ns)   + 1 = 3nCK + 1nCK = 4nCK
+  // DDR-1066  5.625ns = 3nCK   max(3nCK, 5.625ns) + 1 = 3nCL + 1nCK = 4nCK
+  // DDR-1333  5.625ns = 4nCK   max(3nCK, 4nCK)    + 1 = 4nCK + 1nCK = 5nCK
+  // DDR-1600  5ns = 4nCK       max(3nCK, 4nCK)    + 1 = 4nCK + 1nCK = 5nCK
+  // DDR-1866  5ns = 5nCK       max(3nCK, 5nCK)    + 1 = 5nCK + 1nCK = 6nCK
+  // DDR-2133  5ns = 6nCK       max(3nCK, 6nCK)    + 1 = 6nCK + 1nCK = 7nCK
+  MemNSetBitFieldNb (NBPtr, BFTckesr, Tckesr[(NBPtr->DCTPtr->Timings.Speed / 133) - 3]);
+
+  // Tpd = tCKE(min)
+  MemNSetBitFieldNb (NBPtr, BFTpd, Tckesr[(NBPtr->DCTPtr->Timings.Speed / 133) - 3] - 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       The function resets Rcv Fifo
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Dummy - Dummy parameter
+ *
+ */
+
+VOID
+MemTResetRcvFifoUnb (
+  IN OUT   struct _MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dummy
+  )
+{
+  // Program D18F2x9C_x0000_0050_dct[1:0]=00000000h
+  MemNSetBitFieldNb (TechPtr->NBPtr, BFRstRcvFifo, 0);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnfeat.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnfeat.c
new file mode 100644
index 0000000000..0a58085b79
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnfeat.c
@@ -0,0 +1,1737 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnfeat.c
+ *
+ * Common Northbridge features
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "PlatformMemoryConfiguration.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_MNFEAT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_CL_CONT_READ  32
+#define MAX_CL_CONT_WRITE 32
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemNContWritePatternNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+STATIC
+MemNContReadPatternNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+STATIC
+MemNGenHwRcvEnReadsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address
+  );
+
+UINT16
+STATIC
+MemNCompareTestPatternClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  );
+
+UINT16
+STATIC
+MemNInsDlyCompareTestPatternClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  );
+
+VOID
+STATIC
+MemNContWritePatternClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+STATIC
+MemNContReadPatternClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+STATIC
+MemNGenHwRcvEnReadsClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address
+  );
+
+BOOLEAN
+STATIC
+MemNBeforeMemClrClientNb (
+  IN OUT   MEM_NB_BLOCK  *NBPtr,
+  IN       VOID *UnUsed
+  );
+
+VOID
+STATIC
+MemNGenHwRcvEnReadsUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address
+  );
+
+VOID
+STATIC
+MemNContReadPatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+STATIC
+MemNContWritePatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+STATIC
+MemNEnableInfiniteWritePatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemNDisableInfiniteWritePatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitCPGNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitDqsTrainRcvrEnHwNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNDisableDqsTrainRcvrEnHwNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitCPGClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitCPGUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function assigns read/write function pointers to CPG read/write modules.
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNInitCPGNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  NBPtr->WritePattern = MemNContWritePatternNb;
+  NBPtr->ReadPattern = MemNContReadPatternNb;
+  NBPtr->GenHwRcvEnReads = MemNGenHwRcvEnReadsNb;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes member functions of HW Rx En Training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitDqsTrainRcvrEnHwNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  NBPtr->MemNPrepareRcvrEnDlySeed = MemNPrepareRcvrEnDlySeedNb;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function disables member functions of Hw Rx En Training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNDisableDqsTrainRcvrEnHwNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  NBPtr->MemNPrepareRcvrEnDlySeed = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function writes 9 or 18 cache lines continuously using GH CPG engine
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     Pattern - Array of bytes that will be written to DRAM
+ *     @param[in]     Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+VOID
+STATIC
+MemNContWritePatternNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  UINT16 ClDiff;
+  if (ClCount > MAX_CL_CONT_WRITE) {
+    ClDiff = ClCount - MAX_CL_CONT_WRITE;
+    ClCount = MAX_CL_CONT_WRITE;
+  } else {
+    ClDiff = 0;
+  }
+
+  // Set F2x11C[MctWrLimit] to desired number of cachelines in the burst.
+  MemNSetBitFieldNb (NBPtr, BFMctWrLimit, MAX_CL_CONT_WRITE - ClCount);
+
+  // Issue the stream of writes. When F2x11C[MctWrLimit] is reached (or when F2x11C[FlushWr] is set
+  // again), all the writes are written to DRAM.
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+  MemUWriteCachelines (Address, Pattern, ClCount);
+
+  // Flush out prior writes by setting F2x11C[FlushWr].
+  MemNSetBitFieldNb (NBPtr, BFFlushWr, 1);
+  // Wait for F2x11C[FlushWr] to clear, indicating prior writes have been flushed.
+  while (MemNGetBitFieldNb (NBPtr, BFFlushWr) != 0) {}
+
+  // Set F2x11C[MctWrLimit] to 1Fh to disable write bursting.
+  MemNSetBitFieldNb (NBPtr, BFMctWrLimit, 0x1F);
+
+  if (ClDiff > 0) {
+    MemNContWritePatternNb (NBPtr, Address + (MAX_CL_CONT_WRITE * 64), Pattern + (MAX_CL_CONT_WRITE * 64), ClDiff);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function reads 9 or 18 cache lines continuously using GH CPG engine
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out] Buffer - Array of bytes to be filled with data read from DRAM
+ *     @param[in]     Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+STATIC
+MemNContReadPatternNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  BOOLEAN DisAutoRefresh;
+  UINT16 ClDiff;
+  if (ClCount > MAX_CL_CONT_READ) {
+    ClDiff = ClCount - MAX_CL_CONT_READ;
+    ClCount = MAX_CL_CONT_READ;
+  } else {
+    ClDiff = 0;
+  }
+
+  Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+
+  // 1. BIOS ensures that the only accesses outstanding to the MCT are training reads.
+  // 2. If F2x[1, 0]90[BurstLength32]=1, then BIOS ensures that the DCTs and DRAMs are configured for 64
+  // byte bursts (8-beat burst length). This requires that BIOS issue MRS commands to the devices
+  // to change to an 8-beat burst length and then to restore the desired burst length after training
+  // is complete.
+
+  if (MemNGetBitFieldNb (NBPtr, BFDisAutoRefresh) == 0) {
+    DisAutoRefresh = FALSE;
+    // 3. BIOS programs F2x[1, 0]90[ForceAutoPchg] = 0 and F2x[1, 0]8C[DisAutoRefresh] = 1.
+    // 4. If necessary, BIOS programs F2x[1, 0]78[EarlyArbEn] = 1 at this time. See register description.
+    MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 1);
+    // MemNSetBitFieldNb (NBPtr, BFForceAutoPchg, 0);  // ForceAutoPchg is 0 by default.
+    MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 0);
+  } else {
+    DisAutoRefresh = TRUE;
+  }
+
+  MemNSetBitFieldNb (NBPtr, BFPrefCpuDis, 0);
+
+  // 5. BIOS sets F2x11C[MctPrefReqLimit] to the number of training reads (Ntrain) it wishes to generate in the
+  // training sequence.
+  MemNSetBitFieldNb (NBPtr, BFMctPrefReqLimit, ClCount - 1);
+
+  // 6. BIOS sets F2x11C[PrefDramTrainMode] bit.
+  // 7. The act of setting F2x11C[PrefDramTrainMode] causes the MCT to flush out the prefetch stride predictor
+  // table (removing any existing prefetch stride patterns).
+  MemNSetBitFieldNb (NBPtr, BFPrefDramTrainMode, 1);
+
+  // 8. BIOS issues an SFENCE (or other serializing instruction) to ensure that the prior write completes.
+  // 9. For revision C and earlier processors, BIOS generates two training reads. For revision D processors BIOS
+  // generates three training reads. Three are required to detect the stride with DCQ buddy enabled. These must
+  // be to consecutive cache lines (i.e. 64 bytes apart) and must not cross a naturally aligned 4 Kbyte boundary.
+  // 10. These reads set up a stride pattern which is detected by the prefetcher. The prefetcher then continues to
+  // issue prefetches until F2x11C[MctPrefReqLimit] is reached, at which point the MCT clears
+  // F2x11C[PrefDramTrainMode].
+  MemUDummyCLRead (Address);
+  MemUDummyCLRead (Address + 0x40);
+  if (NBPtr->IsSupported[CheckDummyCLRead]) {
+    MemUDummyCLRead (Address + 0x80);
+  }
+  // 11. BIOS issues the remaining (Ntrain - 2 for revisions C and earlier or Ntrain - 3 for revision D) reads after
+  // checking that F2x11C[PrefDramTrainMode] is cleared. These reads must be to consecutive cache lines
+  // (i.e., 64 bytes apart) and must not cross a naturally aligned 4KB boundary. These reads hit the prefetches
+  // and read the data from the prefetch buffer.
+  while (MemNGetBitFieldNb (NBPtr, BFPrefDramTrainMode) != 0) {}
+  MemUReadCachelines (Buffer, Address, ClCount);
+
+  // 14. BIOS restores the target values for F2x[1, 0]90[ForceAutoPchg], F2x[1, 0]8C[DisAutoRefresh] and
+  // F2x[1, 0]90[BurstLength32].
+  if (!DisAutoRefresh) {
+    MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 0);
+    MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 2);
+  }
+
+  if (ClDiff > 0) {
+    MemNContReadPatternNb (NBPtr, Buffer + (MAX_CL_CONT_READ * 64), Address + (MAX_CL_CONT_READ * 64), ClDiff);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function generates a continuous burst of reads during HW RcvEn training.
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     Address - System Address [47:16]
+ *
+ */
+VOID
+STATIC
+MemNGenHwRcvEnReadsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address
+  )
+{
+  UINT8  TempBuffer[12 * 64];
+  UINT8  BurstCount;
+
+  for (BurstCount = 0; BurstCount < 10; BurstCount++) {
+    NBPtr->ReadPattern (NBPtr, TempBuffer, Address, 12);
+    NBPtr->FlushPattern (NBPtr, Address, 12);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function writes cache lines continuously using TCB CPG engine
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     Pattern - Array of bytes that will be written to DRAM
+ *     @param[in]     Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+VOID
+STATIC
+MemNContWritePatternClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  UINT32 PatternHash;
+  UINT32 *DwordPtr;
+  UINT16 i;
+  UINT16 j;
+  UINT16 Multiplier;
+
+  Multiplier = 1;
+
+  // 1. Program D18F2x1C0[WrDramTrainMode]=1.
+  MemNSetBitFieldNb (NBPtr, BFWrDramTrainMode, 1);
+
+  PatternHash = ClCount << 24;
+  for (i = 0; i < 3; i ++) {
+    PatternHash |= (Pattern[i * ClCount * 24 + 9] << (8 * i));
+  }
+  if (NBPtr->CPGInit != PatternHash) {
+
+    if (ClCount == 3) {
+      // Double pattern length for MaxRdLat training
+      Multiplier = 2;
+    }
+
+    // If write training buffer has not been initialized, initialize it
+    // 2. Program D18F2x1C0[TrainLength] to the appropriate number of cache lines.
+    MemNSetBitFieldNb (NBPtr, BFTrainLength, ClCount * Multiplier);
+
+    // 3. Program D18F2x1D0[WrTrainBufAddr]=000h.
+    MemNSetBitFieldNb (NBPtr, BFWrTrainBufAddr, 0);
+
+    // 4. Successively write each dword of the training pattern to D18F2x1D4.
+    DwordPtr = (UINT32 *) Pattern;
+    for (j = 0; j < Multiplier; j++) {
+      for (i = 0; i < (ClCount * 16); i++) {
+        MemNSetBitFieldNb (NBPtr, BFWrTrainBufDat, DwordPtr[i]);
+      }
+    }
+
+    NBPtr->CPGInit = PatternHash;
+  }
+
+  // 5. Program D18F2x1D0[WrTrainBufAddr]=000h
+  MemNSetBitFieldNb (NBPtr, BFWrTrainBufAddr, 0);
+
+  // 6. Program the DRAM training address
+  MemNSetBitFieldNb (NBPtr, BFWrTrainAdrPtrLo, Address << (16 - 6));
+  MemNSetBitFieldNb (NBPtr, BFWrTrainAdrPtrHi, (Address >> (38 - 16)) & 3);
+
+  // 7. Program D18F2x1C0[WrTrainGo]=1.
+  MemNSetBitFieldNb (NBPtr, BFWrTrainGo, 1);
+
+  // 8. Wait for D18F2x1C0[WrTrainGo]=0.
+  while (MemNGetBitFieldNb (NBPtr, BFWrTrainGo) != 0) {}
+
+  // 9. Program D18F2x1C0[WrDramTrainMode]=0.
+  MemNSetBitFieldNb (NBPtr, BFWrDramTrainMode, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function reads cache lines continuously using TCB CPG engine
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out] Buffer - Array of bytes to be filled with data read from DRAM
+ *     @param[in]     Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+STATIC
+MemNContReadPatternClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  UINT16 Multiplier;
+
+  Multiplier = 1;
+  if (ClCount == 3) {
+    // Double pattern length for MaxRdLat training
+    Multiplier = 2;
+  }
+
+  // 1. Program D18F2x1C0[RdDramTrainMode]=1.
+  MemNSetBitFieldNb (NBPtr, BFRdDramTrainMode, 1);
+
+  // 2. Program D18F2x1C0[TrainLength] to the appropriate number of cache lines.
+  MemNSetBitFieldNb (NBPtr, BFTrainLength, ClCount * Multiplier);
+
+  // 3. Program the DRAM training address as follows:
+  MemNSetBitFieldNb (NBPtr, BFWrTrainAdrPtrLo, Address << (16 - 6));
+  MemNSetBitFieldNb (NBPtr, BFWrTrainAdrPtrHi, (Address >> (38 - 16)) & 3);
+
+  // 4. Program D18F2x1D0[WrTrainBufAddr]=000h
+  MemNSetBitFieldNb (NBPtr, BFWrTrainBufAddr, 0);
+
+  // 5. Program D18F2x1C0[RdTrainGo]=1.
+  MemNSetBitFieldNb (NBPtr, BFRdTrainGo, 1);
+
+  // 6. Wait for D18F2x1C0[RdTrainGo]=0.
+  while (MemNGetBitFieldNb (NBPtr, BFRdTrainGo) != 0) {}
+
+  // 7. Read D18F2x1E8[TrainCmpSts] and D18F2x1E8[TrainCmpSts2].
+  // This step will be accomplished in Compare routine.
+
+  // 8. Program D18F2x1C0[RdDramTrainMode]=0.
+  MemNSetBitFieldNb (NBPtr, BFRdDramTrainMode, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function generates a continuous burst of reads during HW RcvEn training.
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     Address - System Address [47:16]
+ *
+ */
+VOID
+STATIC
+MemNGenHwRcvEnReadsClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address
+  )
+{
+  UINT8  TempBuffer[64];
+  UINT8  Count;
+
+  for (Count = 0; Count < 3; Count++) {
+    NBPtr->ReadPattern (NBPtr, TempBuffer, Address, 64);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function assigns read/write function pointers to CPG read/write modules.
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNInitCPGClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  NBPtr->WritePattern = MemNContWritePatternClientNb;
+  NBPtr->ReadPattern = MemNContReadPatternClientNb;
+  NBPtr->GenHwRcvEnReads = MemNGenHwRcvEnReadsClientNb;
+  NBPtr->FlushPattern = (VOID (*) (MEM_NB_BLOCK *, UINT32, UINT16)) memDefRet;
+  NBPtr->CompareTestPattern = MemNCompareTestPatternClientNb;
+  NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternClientNb;
+  NBPtr->FamilySpecificHook[BeforeMemClr] = MemNBeforeMemClrClientNb;
+  NBPtr->CPGInit = 0;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function compares test pattern with data in buffer and
+ *       return a pass/fail bitmap for 8 bytelanes (upper 8 bits are reserved)
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Buffer[]  -  Buffer data from DRAM (Measured data from DRAM) to compare
+ *     @param[in]       Pattern[]  - Pattern (Expected data in ROM/CACHE) to compare against
+ *     @param[in]       ByteCount - Byte count
+ *
+ *     @return  PASS - Bitmap of results of comparison
+ */
+
+UINT16
+STATIC
+MemNCompareTestPatternClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  )
+{
+  return ~((UINT16) MemNGetBitFieldNb (NBPtr, BFTrainCmpSts));
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function compares test pattern with data in buffer and
+ *       return a pass/fail bitmap for 8 bytelanes (upper 8 bits are reserved)
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Buffer[]  -  Buffer data from DRAM (Measured data from DRAM) to compare
+ *     @param[in]       Pattern[]  - Pattern (Expected data in ROM/CACHE) to compare against
+ *     @param[in]       ByteCount - Byte count
+ *
+ *     @retval  Bitmap of results of comparison
+ */
+UINT16
+STATIC
+MemNInsDlyCompareTestPatternClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  )
+{
+  return ~((UINT16) MemNGetBitFieldNb (NBPtr, BFTrainCmpSts2));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function calculates RcvEn seed value for each rank
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNPrepareRcvrEnDlySeedNb (
+  IN OUT   MEM_NB_BLOCK  *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  DIE_STRUCT *MCTPtr;
+  UINT16 SeedTotal;
+  UINT16 SeedFine;
+  UINT16 SeedGross;
+  UINT16 SeedPreGross;
+  UINT16 SeedTotalPreScaling;
+  UINT8  ByteLane;
+  UINT16 Speed;
+  UINT16 PlatEst;
+  UINT8 ChipSel;
+  UINT8 Pass;
+  UINT16 *PlatEstSeed;
+  UINT16 SeedValue[9];
+  UINT16 SeedTtl[9];
+  UINT16 SeedPre[9];
+
+  TechPtr = NBPtr->TechPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+  Speed = NBPtr->DCTPtr->Timings.Speed;
+  SeedTotalPreScaling = 0;
+  ChipSel = TechPtr->ChipSel;
+  Pass = TechPtr->Pass;
+
+  for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+    TechPtr->Bytelane = ByteLane;
+    if (Pass == 1) {
+      // Get platform override seed
+      PlatEstSeed = (UINT16 *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_RXEN_SEED, MCTPtr->SocketId, ChannelPtr->ChannelID, ChipSel >> 1,
+                                                    &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+      // For Pass1, BIOS starts with the delay value obtained from the first pass of write
+      // levelization training that was done in DDR3 Training and add a delay value of 3Bh.
+      PlatEst = 0x3B;
+      NBPtr->FamilySpecificHook[OverrideRcvEnSeed] (NBPtr, &PlatEst);
+      PlatEst = ((PlatEstSeed != NULL) ? PlatEstSeed[ByteLane] : PlatEst);
+      SeedTotal = ChannelPtr->WrDqsDlys[(ChipSel >> 1) * TechPtr->DlyTableWidth () + ByteLane] + PlatEst;
+      SeedValue[ByteLane] = PlatEst;
+    } else {
+      // For Pass2
+      // SeedTotalPreScaling = (the total delay values in D18F2x[1,0]9C_x0000_00[24:10] from pass 1 of
+      //  DQS receiver enable training) - 20h. Subtract 1UI to get back to preamble left edge.
+      if (((ChipSel & 1) == 0) && NBPtr->FamilySpecificHook[TrainingNibbleZero] (NBPtr, &ChipSel)) {
+        // Save Seed for odd CS SeedTotalPreScaling RxEn Value
+        TechPtr->PrevPassRcvEnDly[ByteLane] = ChannelPtr->RcvEnDlys[(ChipSel >> 1) * TechPtr->DlyTableWidth () + ByteLane];
+      }
+      NBPtr->FamilySpecificHook[OverridePrevPassRcvEnDly] (NBPtr, &TechPtr->PrevPassRcvEnDly[ByteLane]);
+      SeedTotalPreScaling = TechPtr->PrevPassRcvEnDly[ByteLane] - 0x20;
+      // SeedTotal = SeedTotalPreScaling*target frequency/lowest supported frequency.
+      SeedTotal = (UINT16) (((UINT32) SeedTotalPreScaling * Speed) / TechPtr->PrevSpeed);
+      NBPtr->FamilySpecificHook[OverrideRcvEnSeedPassN] (NBPtr, &SeedTotal);
+    }
+    SeedTtl[ByteLane] = SeedTotal;
+
+    // SeedGross = SeedTotal DIV 32.
+    SeedGross = SeedTotal >> 5;
+    // SeedFine = SeedTotal MOD 32.
+    SeedFine = SeedTotal & 0x1F;
+    // Next, determine the gross component of SeedTotal. SeedGrossPass1=SeedTotal DIV 32.
+    // Then, determine the fine delay component of SeedTotal. SeedFinePass1=SeedTotal MOD 32.
+    // Use SeedGrossPass1 to determine SeedPreGrossPass1:
+
+    if ((SeedGross & 0x1) != 0) {
+      //if SeedGross is odd
+      SeedPreGross = 1;
+    } else {
+      //if SeedGross is even
+      SeedPreGross = 2;
+    }
+    // (SeedGross - SeedPreGross)
+    TechPtr->DiffSeedGrossSeedPreGross[ByteLane] = (SeedGross - SeedPreGross) << 5;
+
+    //BIOS programs registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 with SeedPreGrossPass1
+    //and SeedFinePass1 from the preceding steps.
+
+    NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (ChipSel >> 1, ByteLane), (SeedPreGross << 5) | SeedFine);
+    SeedPre[ByteLane] = (SeedPreGross << 5) | SeedFine;
+
+    // 202688: Program seed value to RcvEnDly also.
+    NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (ChipSel >> 1, ByteLane), SeedGross << 5);
+  }
+
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+    if (Pass == 1) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSeedValue: ");
+      for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", SeedValue[ByteLane]);
+      }
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSeedTotal: ");
+    for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", SeedTtl[ByteLane]);
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t  SeedPRE: ");
+    for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", SeedPre[ByteLane]);
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+  );
+
+  NBPtr->FamilySpecificHook[RegAccessFence] (NBPtr, NULL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Waits specified number of MEMCLKs
+ *      @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *      @param[in] MemClkCount - Number of MEMCLKs
+ *
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNWaitXMemClksNb (
+  IN OUT   MEM_NB_BLOCK  *NBPtr,
+  IN       UINT32 MemClkCount
+  )
+{
+  MemUWait10ns ((MemClkCount * 100 + NBPtr->DCTPtr->Timings.Speed - 1) / NBPtr->DCTPtr->Timings.Speed, NBPtr->MemPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Issues dummy TCB write read to zero out CL that is used for MemClr
+ *      @param[in,out] *NBPtr  - Pointer to the MEM_NB_BLOCK
+ *      @param[in,out] *UnUsed - unused
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemNBeforeMemClrClientNb (
+  IN OUT   MEM_NB_BLOCK  *NBPtr,
+  IN       VOID *UnUsed
+  )
+{
+  UINT8 Pattern[64];
+  UINT8 i;
+
+  for (i = 0; i < 64; i++) {
+    Pattern[i] = 0;
+  }
+
+  MemNContWritePatternClientNb (NBPtr, 0x20, Pattern, 1);
+  MemNContReadPatternClientNb (NBPtr, Pattern, 0x20, 1);
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function uses the PRBS generator in the DCT to send a DDR Activate command
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]        ChipSelect - Chip select 0-7
+ *     @param[in]        Bank - Bank Address 0-7
+ *     @param[in]        RowAddress - Row Address [17:0]
+ *
+ */
+
+VOID
+MemNRrwActivateCmd (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSelect,
+  IN       UINT8 Bank,
+  IN       UINT32 RowAddress
+  )
+{
+  // Set Chip select
+  MemNSetBitFieldNb (NBPtr, BFCmdChipSelect, (1 << ChipSelect));
+  // Set Bank Address
+  MemNSetBitFieldNb (NBPtr, BFCmdBank, Bank);
+  // Set Row Address
+  MemNSetBitFieldNb (NBPtr, BFCmdAddress, RowAddress);
+  // Send the command
+  MemNSetBitFieldNb (NBPtr, BFSendActCmd, 1);
+  // Wait for command complete
+  MemNPollBitFieldNb (NBPtr, BFSendActCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+  // Wait 75 MEMCLKs
+  NBPtr->WaitXMemClks (NBPtr, 75);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function uses the PRBS generator in the DCT to send a DDR Precharge
+ *     or Precharge All command
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]        ChipSelect - Chip select 0-7
+ *     @param[in]        Bank - Bank Address 0-7, PRECHARGE_ALL_BANKS = Precharge All
+ *
+ *
+ */
+
+VOID
+MemNRrwPrechargeCmd (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSelect,
+  IN       UINT8 Bank
+  )
+{
+  // Wait 25 MEMCLKs
+  NBPtr->WaitXMemClks (NBPtr, 25);
+  // Set Chip select
+  NBPtr->SetBitField (NBPtr, BFCmdChipSelect, (1 << ChipSelect));
+  if (Bank == PRECHARGE_ALL_BANKS) {
+    // Set Row Address, bit 10
+    NBPtr->SetBitField (NBPtr, BFCmdAddress,  NBPtr->GetBitField (NBPtr, BFCmdAddress) | (1 << 10) );
+  } else {
+    // Clear Row Address, bit 10
+    NBPtr->SetBitField (NBPtr, BFCmdAddress,  NBPtr->GetBitField (NBPtr, BFCmdAddress) & (~(1 << 10)) );
+    // Set Bank Address
+    NBPtr->SetBitField (NBPtr, BFCmdBank, Bank);
+  }
+  // Send the command
+  NBPtr->SetBitField (NBPtr, BFSendPchgCmd, 1);
+  // Wait for command complete
+  NBPtr->PollBitField (NBPtr, BFSendPchgCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+  // Wait 25 MEMCLKs
+  NBPtr->WaitXMemClks (NBPtr, 25);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function generates a continuous burst of reads for HW RcvEn
+ *        training using the Unified Northbridge Reliable Read/Write Engine.
+ *
+ *     @param[in,out] NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     Address - Unused by this function
+ *
+ */
+VOID
+STATIC
+MemNGenHwRcvEnReadsUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address
+  )
+{
+  VOID  *DummyPtr;
+  DummyPtr = NULL;
+  //
+  // Issue Stream of Reads from the Target Rank
+  //
+  NBPtr->ReadPattern (NBPtr, DummyPtr, 0, NBPtr->TechPtr->PatternLength);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function generates a continuous stream of reads from DRAM using the
+ *       Unified Northbridge Reliable Read/Write Engine.
+ *
+ *     @param[in,out] NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out] Buffer  - Unused by this function
+ *     @param[in]     Address - Unused by this function
+ *     @param[in]     ClCount - Number of cache lines to read
+ *
+ *     Assumptions:
+ *
+ *
+ *
+ */
+
+VOID
+STATIC
+MemNContReadPatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  RRW_SETTINGS *Rrw;
+  UINT8 CmdTgt;
+  UINT8 ChipSel;
+
+  TechPtr = NBPtr->TechPtr;
+  Rrw = &NBPtr->RrwSettings;
+
+  ChipSel = TechPtr->ChipSel;
+  CmdTgt = Rrw->CmdTgt;
+  //
+  // Wait for RRW Engine to be ready and turn it on
+  //
+  NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+  NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 1);
+  //
+  // Depending upon the Cmd Target, send Row Activate and set Chipselect
+  //   for the Row or Rows that will be used
+  //
+  MemNRrwActivateCmd (NBPtr, ChipSel, Rrw->TgtBankAddressA, Rrw->TgtRowAddressA);
+  NBPtr->SetBitField (NBPtr, BFTgtChipSelectA, ChipSel);
+  if (CmdTgt == CMD_TGT_AB) {
+    MemNRrwActivateCmd (NBPtr, ChipSel, Rrw->TgtBankAddressB, Rrw->TgtRowAddressB);
+    NBPtr->SetBitField (NBPtr, BFTgtChipSelectB, ChipSel);
+  }
+  // Set Comparison Masks
+  NBPtr->SetBitField (NBPtr, BFDramDqMaskLow, Rrw->CompareMaskLow);
+  NBPtr->SetBitField (NBPtr, BFDramDqMaskHigh, Rrw->CompareMaskHigh);
+  //
+  // If All Dimms are ECC Capable Test ECC. Otherwise, mask it off
+  //
+  NBPtr->SetBitField (NBPtr, BFDramEccMask, (NBPtr->MCTPtr->Status[SbEccDimms] == TRUE) ? Rrw->CompareMaskEcc : 0xFF);
+  //
+  // Program the PRBS Seed
+  //
+  NBPtr->SetBitField (NBPtr, BFDataPrbsSeed, Rrw->DataPrbsSeed);
+  //
+  // Set the Command Count
+  //
+  NBPtr->SetBitField (NBPtr, BFCmdCount, ClCount);
+  //
+  // Program the Bubble Count and CmdStreamLen
+  //
+  NBPtr->SetBitField (NBPtr, BFReserved007, 0);
+  NBPtr->SetBitField (NBPtr, BFReserved008, 0);
+  NBPtr->SetBitField (NBPtr, BFReserved006, 1);
+  //
+  // Program the Starting Address
+  //
+  NBPtr->SetBitField (NBPtr, BFTgtBankA, Rrw->TgtBankAddressA);
+  NBPtr->SetBitField (NBPtr, BFTgtAddressA, Rrw->TgtColAddressA);
+  if (CmdTgt == CMD_TGT_AB) {
+    NBPtr->SetBitField (NBPtr, BFTgtBankB, Rrw->TgtBankAddressB);
+    NBPtr->SetBitField (NBPtr, BFTgtAddressB, Rrw->TgtColAddressB);
+  }
+  //
+  // Reset All Errors and Disable StopOnErr
+  //
+  NBPtr->SetBitField (NBPtr, BFResetAllErr, 1);
+  NBPtr->SetBitField (NBPtr, BFStopOnErr, 0);
+  //
+  // Program the CmdTarget
+  //
+  NBPtr->SetBitField (NBPtr, BFCmdTgt, CmdTgt);
+  //
+  // Set CmdType to read
+  //
+  NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_READ);
+  //
+  // Start the Commands
+  //
+  AGESA_TESTPOINT (TpProcMemContinPatternGenRead, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+  //
+  // Commands have started, wait for the reads to complete then clear the command
+  //
+  NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+  NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+  NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+  //
+  // Send the Precharge All Command
+  //
+  MemNRrwPrechargeCmd (NBPtr, ChipSel, PRECHARGE_ALL_BANKS);
+  //
+  // Turn Off the RRW Engine
+  //
+  NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function generates a continuous stream of writes to DRAM using the
+ *       Unified Northbridge Reliable Read/Write Engine.
+ *
+ *     @param[in,out] NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out] Address - Unused by this function
+ *     @param[in]     Pattern - Unused by this function
+ *     @param[in]     ClCount - Number of cache lines to write
+ *
+ */
+
+VOID
+STATIC
+MemNContWritePatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  RRW_SETTINGS *Rrw;
+  UINT8 CmdTgt;
+  UINT8 ChipSel;
+
+  TechPtr = NBPtr->TechPtr;
+  Rrw = &NBPtr->RrwSettings;
+
+  ChipSel = TechPtr->ChipSel;
+  CmdTgt = Rrw->CmdTgt;
+  //
+  // Wait for RRW Engine to be ready and turn it on
+  //
+  NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+  NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 1);
+  //
+  // Depending upon the Cmd Target, send Row Activate and set Chipselect
+  //   for the Row or Rows that will be used
+  //
+  MemNRrwActivateCmd (NBPtr, ChipSel, Rrw->TgtBankAddressA, Rrw->TgtRowAddressA);
+  NBPtr->SetBitField (NBPtr, BFTgtChipSelectA, ChipSel);
+  if (CmdTgt == CMD_TGT_AB) {
+    MemNRrwActivateCmd (NBPtr, ChipSel, Rrw->TgtBankAddressB, Rrw->TgtRowAddressB);
+    NBPtr->SetBitField (NBPtr, BFTgtChipSelectB, ChipSel);
+  }
+  //
+  // Program the PRBS Seed
+  //
+  NBPtr->SetBitField (NBPtr, BFDataPrbsSeed, Rrw->DataPrbsSeed);
+  //
+  // Set the Command Count
+  //
+  NBPtr->SetBitField (NBPtr, BFCmdCount, ClCount);
+  //
+  // Program the Bubble Count and CmdStreamLen
+  //
+  NBPtr->SetBitField (NBPtr, BFReserved007, 0);
+  NBPtr->SetBitField (NBPtr, BFReserved008, 0);
+  NBPtr->SetBitField (NBPtr, BFReserved006, 1);
+  //
+  // Program the Starting Address
+  //
+  NBPtr->SetBitField (NBPtr, BFTgtBankA, Rrw->TgtBankAddressA);
+  NBPtr->SetBitField (NBPtr, BFTgtAddressA, Rrw->TgtColAddressA);
+  if (CmdTgt == CMD_TGT_AB) {
+    NBPtr->SetBitField (NBPtr, BFTgtBankB, Rrw->TgtBankAddressB);
+    NBPtr->SetBitField (NBPtr, BFTgtAddressB, Rrw->TgtColAddressB);
+  }
+  //
+  // Program the CmdTarget
+  //
+  NBPtr->SetBitField (NBPtr, BFCmdTgt, CmdTgt);
+  //
+  // Set CmdType to Write
+  //
+  NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_WRITE);
+  //
+  // Start the Commands
+  //
+  AGESA_TESTPOINT (TpProcMemContinPatternGenWrite, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+  //
+  // Commands have started, wait for the writes to complete then clear the command
+  //
+  // Wait for TestStatus = 1 and CmdSendInProg = 0.
+  NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+  NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+  NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+  //
+  // Send the Precharge All Command
+  //
+  MemNRrwPrechargeCmd (NBPtr, ChipSel, PRECHARGE_ALL_BANKS);
+  //
+  // Turn Off the RRW Engine
+  //
+  NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function checks the Error status bits for comparison results
+ *
+ *     @param[in,out]   *NBPtr    - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Buffer[]  -  Not used in this implementation
+ *     @param[in]       Pattern[] - Not used in this implementation
+ *     @param[in]       ByteCount - Not used in this implementation
+ *
+ *     @return  PASS - Bitmap of results of comparison
+ */
+
+UINT16
+STATIC
+MemNCompareTestPatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  )
+{
+
+
+  UINT16 i;
+  UINT16 Pass;
+  UINT8 ChipSel;
+  UINT8 ColumnCount;
+  UINT8* FailingBitMaskPtr;
+  UINT8 FailingBitMask[9];
+  UINT32 NibbleErrSts;
+
+  ChipSel = NBPtr->TechPtr->ChipSel;
+  ColumnCount = NBPtr->ChannelPtr->ColumnCount;
+  // Calculate Failing Bitmask pointer
+  FailingBitMaskPtr = &(NBPtr->ChannelPtr->FailingBitMask[(ColumnCount * NBPtr->TechPtr->ChipSel)]);
+
+  //
+  // Get Failing bit data
+  //
+  *((UINT32*)FailingBitMask) = NBPtr->GetBitField (NBPtr, BFDQErrLow);
+  *((UINT32*)&FailingBitMask[4]) = NBPtr->GetBitField (NBPtr, BFDQErrHigh);
+  FailingBitMask[8] = (UINT8)NBPtr->GetBitField (NBPtr, BFEccErr);
+
+  Pass = 0x0000;
+  //
+  // Get Comparison Results - Convert Nibble Masks to Byte Masks
+  //
+  NibbleErrSts = NBPtr->GetBitField (NBPtr, BFNibbleErrSts);
+
+  for (i = 0; i < ColumnCount ; i++) {
+    Pass |= ((NibbleErrSts & 0x03) > 0 ) ? (1 << i) : 0;
+    NibbleErrSts >>= 2;
+    FailingBitMaskPtr[i] = FailingBitMask[i];
+  }
+  Pass = ~Pass;
+  return Pass;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function checks the Error status bits for offset comparison results
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Buffer[]  -  Buffer data from DRAM (Measured data from DRAM) to compare
+ *     @param[in]       Pattern[]  - Pattern (Expected data in ROM/CACHE) to compare against
+ *     @param[in]       ByteCount - Byte count
+ *
+ *     @retval  Bitmap of results of comparison
+ */
+UINT16
+STATIC
+MemNInsDlyCompareTestPatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  )
+{
+  UINT16 i;
+  UINT16 Pass;
+  UINT8 ColumnCount;
+  UINT32 NibbleErr180Sts;
+
+  ColumnCount = NBPtr->ChannelPtr->ColumnCount;
+  Pass = 0x0000;
+  //
+  // Get Comparison Results - Convert Nibble Masks to Byte Masks
+  //
+  NibbleErr180Sts = NBPtr->GetBitField (NBPtr, BFNibbleErr180Sts);
+
+  for (i = 0; i < ColumnCount ; i++) {
+    Pass |= ((NibbleErr180Sts & 0x03) > 0 ) ? (1 << i) : 0;
+    NibbleErr180Sts >>= 2;
+  }
+  Pass = ~Pass;
+
+  return Pass;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function assigns read/write function pointers to CPG read/write modules.
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNInitCPGUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  NBPtr->WritePattern = MemNContWritePatternUnb;
+  NBPtr->ReadPattern = MemNContReadPatternUnb;
+  NBPtr->GenHwRcvEnReads = MemNGenHwRcvEnReadsUnb;
+  NBPtr->FlushPattern = (VOID (*) (MEM_NB_BLOCK *, UINT32, UINT16)) memDefRet;
+  NBPtr->TrainingPatternInit = (AGESA_STATUS (*) (MEM_NB_BLOCK *)) memDefRetSuccess;
+  NBPtr->TrainingPatternFinalize = (AGESA_STATUS (*) (MEM_NB_BLOCK *)) memDefRetSuccess;
+  NBPtr->CompareTestPattern = MemNCompareTestPatternUnb;
+  NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternUnb;
+  NBPtr->FamilySpecificHook[SetupHwTrainingEngine] = MemNSetupHwTrainingEngineUnb;
+  NBPtr->EnableInfiniteWritePattern = MemNEnableInfiniteWritePatternUnb;
+  NBPtr->DisableInfiniteWritePattern = MemNDisableInfiniteWritePatternUnb;
+  NBPtr->CPGInit = 0;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function generates a continuous stream of writes infinite writes to DRAM using the
+ *       Unified Northbridge Reliable Read/Write Engine.
+ *
+ *     @param[in,out] NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNEnableInfiniteWritePatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 ByteLane;
+  UINT32 WrDatValue;
+  UINT32 WrDqsValue;
+  MEM_TECH_BLOCK *TechPtr;
+  RRW_SETTINGS *Rrw;
+  UINT8 CmdTgt;
+  UINT8 ChipSel;
+  TechPtr = NBPtr->TechPtr;
+  Rrw = &NBPtr->RrwSettings;
+  ChipSel = TechPtr->ChipSel;
+  CmdTgt = Rrw->CmdTgt;
+
+  // Ensure that DisAutoRefresh and ZqCals are disabled during the use of RRWM
+  if (MemNGetBitFieldNb (NBPtr, BFDisAutoRefresh) == 0) {
+    NBPtr->OrigDisAutoRefreshState = FALSE;
+    MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 1);
+    MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 0);
+  } else {
+    NBPtr->OrigDisAutoRefreshState = TRUE;
+  }
+
+  //
+  // Enable I/O Skew mode
+  //
+  for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8) ; ByteLane++) {
+    //Move WrDQS settings from current DIMM to DIMM 0
+    WrDqsValue = NBPtr->ChannelPtr->WrDqsDlys[(NBPtr->TechPtr->ChipSel >> 1) * NBPtr->TechPtr->DlyTableWidth () + ByteLane];
+    NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (0, ByteLane), (UINT16)WrDqsValue);
+    //Move WrDat settings from current DIMM to DIMM 0
+    WrDatValue = NBPtr->ChannelPtr->WrDatDlys[(NBPtr->TechPtr->ChipSel >> 1) * NBPtr->TechPtr->DlyTableWidth () + ByteLane];
+    NBPtr->SetTrainDly (NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (0, ByteLane), (UINT16)WrDatValue);
+  }
+  NBPtr->SetBitField (NBPtr, BFReserved00A, 0x0001);
+
+
+  //
+  // Enable PRBS
+  //
+
+  //
+  // Wait for RRW Engine to be ready and turn it on
+  //
+  NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+  NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 1);
+  //
+  // Depending upon the Cmd Target, send Row Activate and set Chipselect
+  //   for the Row or Rows that will be used
+  //
+  MemNRrwActivateCmd (NBPtr, ChipSel, Rrw->TgtBankAddressA, Rrw->TgtRowAddressA);
+  NBPtr->SetBitField (NBPtr, BFTgtChipSelectA, ChipSel);
+  //
+  // Program the PRBS Seed
+  //
+  NBPtr->SetBitField (NBPtr, BFDataPrbsSeed, Rrw->DataPrbsSeed);
+  //
+  // Set the Command Count
+  //
+  NBPtr->SetBitField (NBPtr, BFCmdCount, 0);
+  //
+  // Program the Bubble Count and CmdStreamLen
+  //
+  NBPtr->SetBitField (NBPtr, BFReserved007, 0);
+  NBPtr->SetBitField (NBPtr, BFReserved008, 0);
+  NBPtr->SetBitField (NBPtr, BFReserved006, 1);
+  //
+  // Program the Starting Address
+  //
+  NBPtr->SetBitField (NBPtr, BFTgtBankA, Rrw->TgtBankAddressA);
+  NBPtr->SetBitField (NBPtr, BFTgtAddressA, Rrw->TgtColAddressA);
+  //
+  // Program the CmdTarget
+  //
+  NBPtr->SetBitField (NBPtr, BFCmdTgt, CMD_TGT_A);
+  //
+  // Set CmdType to write
+  //
+  NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_WRITE);
+  //
+  // Start the Commands
+  //
+  NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function disables the infinite stream of writes to DRAM using the
+ *       Unified Northbridge Reliable Read/Write Engine.
+ *
+ *     @param[in,out] NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNDisableInfiniteWritePatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 ByteLane;
+  UINT32 WrDatValue;
+  UINT32 WrDqsValue;
+  //
+  // Disable PRBS
+  NBPtr->SetBitField (NBPtr, BFCmdCount, 1);
+  //Wait for TestStatus = 1 and CmdSendInProg = 0
+  NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+  NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+  //
+  // Disable I/O Skew Mode
+  for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8) ; ByteLane++) {
+    //Move WrDqs settings from DIMM 0 from saved area back to register
+    WrDqsValue = NBPtr->ChannelPtr->WrDqsDlys[0 * NBPtr->TechPtr->DlyTableWidth () + ByteLane];
+    NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (0, ByteLane), (UINT16)WrDqsValue);
+    //Move WrDat settings from DIMM 0 from saved area back to register
+    WrDatValue = NBPtr->ChannelPtr->WrDatDlys[0 * NBPtr->TechPtr->DlyTableWidth () + ByteLane];
+    NBPtr->SetTrainDly (NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (0, ByteLane), (UINT16)WrDatValue);
+  }
+  NBPtr->SetBitField (NBPtr, BFReserved00A, 0x0000);
+  //
+  // Turn Off the RRW Engine
+  //
+  MemNRrwPrechargeCmd (NBPtr, NBPtr->TechPtr->ChipSel, PRECHARGE_ALL_BANKS);
+  NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 0);
+  //
+  // Restore DisAutoRefresh and ZQCals to original state
+  //
+  if (!NBPtr->OrigDisAutoRefreshState) {
+    MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 0);
+    MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 2);
+  }
+
+}
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function checks the 180 Error status bits for RD DQS training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Buffer[]  -  Buffer data from DRAM (Measured data from DRAM) to compare
+ *     @param[in]       Pattern[]  - Pattern (Expected data in ROM/CACHE) to compare against
+ *     @param[in]       ByteCount - Byte count,
+ *
+ *     @retval  Bitmap of results of comparison
+ */
+UINT32
+MemN180CompareRdDqs__PatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  )
+{
+  return NBPtr->GetBitField (NBPtr, BFNibbleErr180Sts);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function checks the In Phase Error status bits for comparison results for RDDQS training
+ *
+ *     @param[in,out]   *NBPtr    - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Buffer[]  -  Not used in this implementation
+ *     @param[in]       Pattern[] - Not used in this implementation
+ *     @param[in]       ByteCount - Not used in this implementation
+ *
+ *     @return  PASS - Bitmap of results of comparison
+ */
+
+UINT32
+MemNInPhaseCompareRdDqs__PatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  )
+{
+  return NBPtr->GetBitField (NBPtr, BFNibbleErrSts);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function starts the Victim for RdDqs Training Continuous Writes
+ *
+ *     @param[in,out]   *NBPtr    - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       SeedCount  -  Seed count
+ */
+VOID
+MemNStartRdDqs__VictimContinuousWritesUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 SeedCount
+  )
+{
+  // Program the PRBS Seed
+  NBPtr->SetBitField (NBPtr, BFDataPrbsSeed, NBPtr->GetPrbs__RdDqsSeed (NBPtr, SeedCount));
+  //
+  // Enable continuous writes on the victim channels
+  //
+    // Set the Command Count
+  NBPtr->SetBitField (NBPtr, BFCmdCount, 256);
+  NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_WRITE);
+  NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+  // Wait for TestStatus = 1 and CmdSendInProg = 0.
+  NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+  NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+  //
+  // Enable continuous reads on the victim channels
+  //
+  // Set the Command Count
+  ASSERT (NBPtr->MaxAggressorDimms[NBPtr->Dct] != 0);
+  NBPtr->SetBitField (NBPtr, BFCmdCount, (25600 / NBPtr->MaxAggressorDimms[NBPtr->Dct]));
+  // Reset All Errors and Disable StopOnErr
+  NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_READ);
+  NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+  // Wait for TestStatus = 1 and CmdSendInProg = 0
+  NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+  //}
+  NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function Initializes the Victim chipSelects for RdDqs Training Continuous Writes
+ *
+ *     @param[in,out]   *NBPtr    - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNInitializeRdDqs__VictimChipSelContinuousWritesUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  NBPtr->SetBitField (NBPtr, BFTgtChipSelectA, NBPtr->TechPtr->ChipSel);
+  NBPtr->SetBitField (NBPtr, BFTgtChipSelectB, NBPtr->TechPtr->ChipSel);
+  NBPtr->SetBitField (NBPtr, BFResetAllErr, 1);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function finalizes the Victim for RdDqs Training
+ *
+ *     @param[in,out]   *NBPtr    - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNFinalizeRdDqs__VictimContinuousWritesUnb  (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 InitialCS;
+  UINT8 ChipSel;
+  InitialCS = NBPtr->TechPtr->ChipSel;
+  NBPtr->SetBitField (NBPtr, BFReserved003, 0);
+  for (ChipSel = InitialCS; ChipSel < (InitialCS + 2); ChipSel++) {
+    // Ensure that Odd and Even CS are trained
+    if ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) == 0) {
+      continue;
+    }
+    NBPtr->TechPtr->ChipSel = ChipSel;
+    // Send the Precharge All Command
+    MemNRrwPrechargeCmd (NBPtr, ChipSel, PRECHARGE_ALL_BANKS);
+  }
+  // Turn Off the RRW Engine
+  NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 0);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function Initializes the Victim for RdDqs Training
+ *
+ *     @param[in,out]   *NBPtr    - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNInitializeRdDqs__VictimContinuousWritesUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  RRW_SETTINGS *Rrw;
+  UINT8 InitialCS;
+  UINT8 ChipSel;
+  InitialCS = NBPtr->TechPtr->ChipSel;
+  Rrw = &NBPtr->RrwSettings;
+  // Program the Bubble Count and CmdStreamLen
+  NBPtr->SetBitField (NBPtr, BFReserved007, 32);
+  NBPtr->SetBitField (NBPtr, BFReserved008, 0);
+  NBPtr->SetBitField (NBPtr, BFReserved006, 63);
+  // Set Comparison Masks
+  NBPtr->SetBitField (NBPtr, BFDramDqMaskLow, Rrw->CompareMaskLow);
+  NBPtr->SetBitField (NBPtr, BFDramDqMaskHigh, Rrw->CompareMaskHigh);
+  // If All Dimms are ECC Capable Test ECC. Otherwise, mask it off
+  NBPtr->SetBitField (NBPtr, BFDramEccMask, (NBPtr->MCTPtr->Status[SbEccDimms] == TRUE) ? Rrw->CompareMaskEcc : 0xFF);
+  // Program the Starting Address
+  NBPtr->SetBitField (NBPtr, BFTgtBankA, Rrw->TgtBankAddressA);
+  NBPtr->SetBitField (NBPtr, BFTgtAddressA, Rrw->TgtColAddressA);
+  NBPtr->SetBitField (NBPtr, BFTgtBankB, Rrw->TgtBankAddressB);
+  NBPtr->SetBitField (NBPtr, BFTgtAddressB, Rrw->TgtColAddressB);
+  NBPtr->SetBitField (NBPtr, BFCmdTgt, CMD_TGT_AB);
+  // Wait for RRW Engine to be ready and turn it on
+  NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+  NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 1);
+  for (ChipSel = InitialCS; ChipSel < (InitialCS + 2); ChipSel++) {
+    // Ensure that Odd and Even CS are trained
+    if ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) == 0) {
+      continue;
+    }
+    NBPtr->TechPtr->ChipSel = ChipSel;
+    // Set Chip select
+    MemNSetBitFieldNb (NBPtr, BFCmdChipSelect, (1 << NBPtr->TechPtr->ChipSel));
+    // Set Bank Address
+    MemNSetBitFieldNb (NBPtr, BFCmdBank, Rrw->TgtBankAddressA);
+    // Set Row Address
+    MemNSetBitFieldNb (NBPtr, BFCmdAddress, Rrw->TgtRowAddressA);
+    // Send the command
+    MemNSetBitFieldNb (NBPtr, BFSendActCmd, 1);
+    // Wait for command complete
+    MemNPollBitFieldNb (NBPtr, BFSendActCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+    // Set Chip select
+    MemNSetBitFieldNb (NBPtr, BFCmdChipSelect, (1 << NBPtr->TechPtr->ChipSel));
+    // Set Bank Address
+    MemNSetBitFieldNb (NBPtr, BFCmdBank, Rrw->TgtBankAddressB);
+    // Set Row Address
+    MemNSetBitFieldNb (NBPtr, BFCmdAddress, Rrw->TgtRowAddressB);
+    // Send the command
+    MemNSetBitFieldNb (NBPtr, BFSendActCmd, 1);
+    // Wait for command complete
+    MemNPollBitFieldNb (NBPtr, BFSendActCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+  }
+  NBPtr->SetBitField (NBPtr, BFReserved003, 1);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function enables continuous writes on unused channels
+ *     @param[in,out]   *NBPtr    - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *SeedCount -  seed index
+ *
+ *     @return    Prbs Seed
+ *
+ */
+
+UINT32
+MemNGetPrbs__RdDqsSeedUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 SeedCount
+  )
+{
+  UINT32 PrbsSeed;
+  ASSERT (SeedCount <= (NBPtr->MaxSeedCount - 1))
+  PrbsSeed = ((UINT32)0x7ea05 << SeedCount) & 0x7FFFF;
+  ASSERT (PrbsSeed != 0);
+  return PrbsSeed;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function enables/disables continuous writes on unused agressor channels
+ *     @param[in,out]   *NBPtr    - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       SeedCount  -  Seed count
+ *     @param[in]       TurnOnInfinite - TRUE - Enable Infinite Mode
+ *                      TurnOnInfinite - FALSE - Disable Infinite Mode
+ *
+ */
+VOID
+MemNAgressorContinuousWritesUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 SeedCount,
+  IN       BOOLEAN TurnOnInfinite
+  )
+{
+  UINT8  CurrChipSel;
+  UINT8  CurrDct;
+  UINT8  Dct;
+  UINT32 Address;
+  UINT8  Die;
+  MEM_NB_BLOCK *TargetNBPtr;
+  BOOLEAN SkipContinuous;
+  CurrDct = NBPtr->Dct;
+  CurrChipSel = NBPtr->TechPtr->ChipSel;
+  SkipContinuous = FALSE;
+  for (Die = 0; Die < NBPtr->NodeCount; Die++) {
+    if (NBPtr->DieEnabled[Die]) {
+      for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+        // Make sure that we are not targeting current DCT, current Node
+        if (Die == NBPtr->Node) {
+          if (CurrDct == Dct) {
+            SkipContinuous = TRUE;
+          } else {
+            SkipContinuous = FALSE;
+          }
+        } else {
+          SkipContinuous = FALSE;
+        }
+        // Enable/Disable continuous on aggressors
+        if (SkipContinuous == FALSE) {
+          if (Die == NBPtr->Node) {
+            TargetNBPtr = NBPtr;
+          } else {
+            ASSERT (NBPtr->AdjacentDieNBPtr != NULL);
+            TargetNBPtr = NBPtr->AdjacentDieNBPtr;
+          }
+          // All context switched at this point
+          TargetNBPtr->SwitchDCT (TargetNBPtr, Dct);
+          if (TargetNBPtr->DCTPtr->Timings.DctMemSize != 0) {
+            // Set Targets for agressors
+            TargetNBPtr->TechPtr->ChipSel = TargetNBPtr->CurrentAggressorCSTarget[Dct];
+            TargetNBPtr->GetSysAddr (TargetNBPtr, TargetNBPtr->TechPtr->ChipSel, &Address);
+            TargetNBPtr->RrwSettings.DataPrbsSeed = TargetNBPtr->GetPrbs__RdDqsSeed (TargetNBPtr, 0);
+            if (TurnOnInfinite) {
+              // Enable continuous writes on aggressor channels
+              TargetNBPtr->EnableInfiniteWritePattern (TargetNBPtr);
+            } else {
+              // Disable continous writes on aggressor channels
+              TargetNBPtr->DisableInfiniteWritePattern (TargetNBPtr);
+              // Set the next target CS for aggressor channel
+              if (TargetNBPtr->CurrentAggressorCSTarget[Dct] == TargetNBPtr->MaxAggressorCSEnabled[Dct]) {
+                TargetNBPtr->CurrentAggressorCSTarget[Dct] = TargetNBPtr->InitialAggressorCSTarget[Dct];
+              } else {
+                TargetNBPtr->CurrentAggressorCSTarget[Dct] = TargetNBPtr->CurrentAggressorCSTarget[Dct] + TargetNBPtr->CSPerDelay (TargetNBPtr);
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+  // Restore Node, DCT and ChipSel
+  NBPtr->TechPtr->ChipSel = CurrChipSel;
+  NBPtr->SwitchDCT (NBPtr, CurrDct);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnflow.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnflow.c
new file mode 100644
index 0000000000..c2ec0112d2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnflow.c
@@ -0,0 +1,333 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnflow.c
+ *
+ * Common Northbridge initializer flow for MCT and DCT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_MNFLOW_FILECODE
+/* features */
+#include "mftds.h"
+
+extern MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[];
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemNInitDCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemNCleanupDctRegsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemNGetPORFreqLimitTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function programs the MCT with initial values
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - AGESA_FATAL error did not occur (it is possible to have an Error that is not AGESA_SUCCESS)
+ *     @return          FALSE - AGESA_FATAL error occurred
+ */
+
+BOOLEAN
+MemNInitMCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  UINT8 Dct;
+  BOOLEAN Flag;
+  ID_INFO CallOutIdInfo;
+
+  TechPtr = NBPtr->TechPtr;
+  // Switch Tech functions for Nb
+  NBPtr->TechBlockSwitch (NBPtr);
+  // Start Memory controller initialization sequence
+  Flag = FALSE;
+  if (TechPtr->DimmPresence (TechPtr)) {
+    AGESA_TESTPOINT (TpProcMemPlatformSpecificInit, &(NBPtr->MemPtr->StdHeader));
+    if (NBPtr->MemNPlatformSpecificFormFactorInitNb (NBPtr)) {
+      AGESA_TESTPOINT (TpProcMemSpdTiming, &(NBPtr->MemPtr->StdHeader));
+      if (TechPtr->SpdCalcWidth (TechPtr)) {
+        AGESA_TESTPOINT (TpProcMemSpeedTclConfig, &(NBPtr->MemPtr->StdHeader));
+        if (TechPtr->SpdGetTargetSpeed (TechPtr)) {
+          for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+            NBPtr->SwitchDCT (NBPtr, Dct);
+
+            Flag |= MemNInitDCTNb (NBPtr);
+          }
+
+          if (Flag && !NBPtr->IsSupported[TwoStageDramInit] && (NBPtr->MCTPtr->ErrCode != AGESA_FATAL)) {
+            MemFInitTableDrive (NBPtr, MTBeforeDInit);
+            AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeDramInit, &(NBPtr->MemPtr->StdHeader));
+            CallOutIdInfo.IdField.SocketId = NBPtr->MCTPtr->SocketId;
+            CallOutIdInfo.IdField.ModuleId = NBPtr->MCTPtr->DieId;
+            IDS_HDT_CONSOLE (MEM_FLOW, "\nCalling out to Platform BIOS on Socket %d Module %d...\n", CallOutIdInfo.IdField.SocketId, CallOutIdInfo.IdField.ModuleId);
+            AgesaHookBeforeDramInit ((UINTN) CallOutIdInfo.IdInformation, NBPtr->MemPtr);
+            IDS_HDT_CONSOLE (MEM_FLOW, "\nVDDIO = 1.%dV\n", (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) ? 5 :
+                                                  (NBPtr->RefPtr->DDR3Voltage == VOLT1_35) ? 35 :
+                                                  (NBPtr->RefPtr->DDR3Voltage == VOLT1_25) ? 25 : 999);
+            AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeDramInit, &(NBPtr->MemPtr->StdHeader));
+            IDS_OPTION_HOOK (IDS_BEFORE_DRAM_INIT, NBPtr, &(NBPtr->MemPtr->StdHeader));
+            NBPtr->StartupDCT (NBPtr);
+          }
+        }
+      }
+    }
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode != AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function initializes the platform specific block for families that support
+ *      table driven form factor
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - AGESA_SUCCESS
+ */
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    NBPtr->PsPtr->MemPDoPs = MemPPSCFlow;
+    NBPtr->PsPtr->MemPGetPORFreqLimit = MemNGetPORFreqLimitTblDrvNb;
+    NBPtr->PsPtr->MemPGetPass1Seeds = MemPGetPSCPass1Seed;
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function selects appropriate Tech functions for the NB.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNTechBlockSwitchNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+
+  TechPtr = NBPtr->TechPtr;
+
+  // Specify Dimm-Byte training for Nb
+  MemTDimmByteTrainInit (TechPtr);
+
+  // Filter included for RcvrEn training.
+  // note: If you'd like to drop the filter, you have to comment out these two lines together.
+  TechPtr->MaxFilterDly = MAX_FILTER_DLY_DDR3;
+  TechPtr->SaveRcvrEnDly = MemTSaveRcvrEnDlyByteFilter;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function programs the DCT with initial values
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Error did not occur
+ *     @return          FALSE - Error occurred
+ */
+
+BOOLEAN
+STATIC
+MemNInitDCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  TechPtr = NBPtr->TechPtr;
+  TechPtr->SetDramMode (TechPtr);
+
+  if (!NBPtr->MCTPtr->GangedMode || (NBPtr->MCTPtr->Dct == 0)) {
+    if (NBPtr->DCTPtr->Timings.DctDimmValid == 0) {
+      NBPtr->DisableDCT (NBPtr);
+    } else {
+      MemNCleanupDctRegsNb (NBPtr);
+      if (TechPtr->AutoCycTiming (TechPtr)) {
+        if (TechPtr->SpdSetBanks (TechPtr)) {
+          if (NBPtr->StitchMemory (NBPtr)) {
+            // if all dimms on a DCT are disabled, the DCT needs to be disabled.
+            if (NBPtr->DCTPtr->Timings.CsEnabled != 0) {
+              if (NBPtr->AutoConfig (NBPtr)) {
+                if (NBPtr->PlatformSpec (NBPtr)) {
+                  return TRUE;
+                }
+              }
+            } else {
+              NBPtr->DisableDCT (NBPtr);
+            }
+          }
+        }
+      }
+    }
+  }
+  return FALSE;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function clears DCT registers
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNCleanupDctRegsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BIT_FIELD_NAME BitField;
+
+  for (BitField = BFCSBaseAddr0Reg; BitField <= BFCSBaseAddr7Reg; BitField++) {
+    MemNSetBitFieldNb (NBPtr, BitField, 0);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This is function gets the POR speed limit for families supports table driven form factor
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNGetPORFreqLimitTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 i;
+
+  i = 0;
+  while (memPlatSpecFlowArray[i] != NULL) {
+    if ((memPlatSpecFlowArray[i])->MaxFrequency (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+      break;
+    }
+    i++;
+  }
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnmct.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnmct.c
new file mode 100644
index 0000000000..378575e5c8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnmct.c
@@ -0,0 +1,1286 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnmct.c
+ *
+ * Northbridge Common MCT supporting functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 58425 $ @e \$Date: 2011-08-29 08:29:04 -0600 (Mon, 29 Aug 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "cpuFeatures.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_MNMCT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define _16MB_RJ16  0x0100
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemNSetMTRRrangeNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Base,
+  IN OUT   UINT32 *LimitPtr,
+  IN       UINT32 MtrrAddr,
+  IN       UINT8 MtrrType
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     Get max frequency from OEM platform definition, from
+ *     any user override (limiting) of max frequency, and
+ *     from any Si Revision Specific information.  Return
+ *     the least of these three in DIE_STRUCT.Timings.TargetSpeed.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSyncTargetSpeedNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST UINT16 DdrMaxRateTab[] = {
+    UNSUPPORTED_DDR_FREQUENCY,
+    DDR1600_FREQUENCY,
+    DDR1333_FREQUENCY,
+    DDR1066_FREQUENCY,
+    DDR800_FREQUENCY,
+    DDR667_FREQUENCY,
+    DDR533_FREQUENCY,
+    DDR400_FREQUENCY
+  };
+
+  UINT8  Dct;
+  UINT8  Channel;
+  UINT16 MinSpeed;
+  UINT16 DdrMaxRate;
+  DCT_STRUCT *DCTPtr;
+  USER_MEMORY_TIMING_MODE *ChnlTmgMod;
+  USER_MEMORY_TIMING_MODE Mode[MAX_CHANNELS_PER_SOCKET];
+  MEMORY_BUS_SPEED MemClkFreq;
+  MEMORY_BUS_SPEED ProposedFreq;
+
+  ASSERT (NBPtr->DctCount <= sizeof (Mode));
+  MinSpeed = 16000;
+  DdrMaxRate = 16000;
+  if (NBPtr->IsSupported[CheckMaxDramRate]) {
+    // Check maximum DRAM data rate that the processor is designed to support.
+    DdrMaxRate = DdrMaxRateTab[MemNGetBitFieldNb (NBPtr, BFDdrMaxRate)];
+    NBPtr->FamilySpecificHook[GetDdrMaxRate] (NBPtr, &DdrMaxRate);
+    IDS_OPTION_HOOK (IDS_SKIP_FUSED_MAX_RATE, &DdrMaxRate, &NBPtr->MemPtr->StdHeader);
+  }
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+
+    // Check if input user time mode is valid or not
+    ASSERT ((NBPtr->RefPtr->UserTimingMode == TIMING_MODE_SPECIFIC) ||
+        (NBPtr->RefPtr->UserTimingMode == TIMING_MODE_LIMITED) ||
+        (NBPtr->RefPtr->UserTimingMode == TIMING_MODE_AUTO));
+    Mode[Dct] = NBPtr->RefPtr->UserTimingMode;
+    // Check if input clock value is valid or not
+    ASSERT ((NBPtr->ChannelPtr->TechType == DDR3_TECHNOLOGY) ?
+      (NBPtr->RefPtr->MemClockValue >= DDR667_FREQUENCY) :
+      (NBPtr->RefPtr->MemClockValue <= DDR1066_FREQUENCY));
+    MemClkFreq = NBPtr->RefPtr->MemClockValue;
+    if (DCTPtr->Timings.DctDimmValid != 0) {
+      Channel = MemNGetSocketRelativeChannelNb (NBPtr, Dct, 0);
+      ChnlTmgMod = (USER_MEMORY_TIMING_MODE *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_BUS_SPEED, NBPtr->MCTPtr->SocketId, Channel, 0,
+                                                                    &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+      if (ChnlTmgMod != NULL) {
+        // Check if input user timing mode is valid or not
+        ASSERT ((ChnlTmgMod[0] == TIMING_MODE_SPECIFIC) || (ChnlTmgMod[0] == TIMING_MODE_LIMITED) ||
+          (ChnlTmgMod[0] != TIMING_MODE_AUTO));
+        if (ChnlTmgMod[0] != TIMING_MODE_AUTO) {
+          Mode[Dct] = ChnlTmgMod[0];
+          // Check if input clock value is valid or not
+          ASSERT ((NBPtr->ChannelPtr->TechType == DDR3_TECHNOLOGY) ?
+            ((MEMORY_BUS_SPEED)ChnlTmgMod[1] >= DDR667_FREQUENCY) :
+            ((MEMORY_BUS_SPEED)ChnlTmgMod[1] <= DDR1066_FREQUENCY));
+          MemClkFreq = (MEMORY_BUS_SPEED)ChnlTmgMod[1];
+        }
+      }
+
+      ProposedFreq = UserOptions.CfgMemoryBusFrequencyLimit;
+      if (Mode[Dct] == TIMING_MODE_LIMITED) {
+        if (MemClkFreq < ProposedFreq) {
+          ProposedFreq = MemClkFreq;
+        }
+      } else if (Mode[Dct] == TIMING_MODE_SPECIFIC) {
+        ProposedFreq = MemClkFreq;
+      }
+
+      if (Mode[Dct] == TIMING_MODE_SPECIFIC) {
+        DCTPtr->Timings.TargetSpeed = (UINT16) ProposedFreq;
+      } else {
+        // "limit" mode
+        if (DCTPtr->Timings.TargetSpeed > ProposedFreq) {
+          DCTPtr->Timings.TargetSpeed = (UINT16) ProposedFreq;
+        }
+      }
+
+      NBPtr->MemNCapSpeedBatteryLife (NBPtr);
+
+      if (DCTPtr->Timings.TargetSpeed > DdrMaxRate) {
+        if (Mode[Dct] == TIMING_MODE_SPECIFIC) {
+          PutEventLog (AGESA_ALERT, MEM_ALERT_USER_TMG_MODE_OVERRULED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+          SetMemError (AGESA_ALERT, NBPtr->MCTPtr);
+        }
+        DCTPtr->Timings.TargetSpeed = DdrMaxRate;
+      }
+
+      IDS_SKIP_HOOK (IDS_POR_MEM_FREQ, NBPtr, &NBPtr->MemPtr->StdHeader) {
+        //
+        //Call Platform POR Frequency Override
+        //
+        if (!MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_SPEEDLIMIT, ALL_DIMMS)) {
+          //
+          // Get the POR frequency limit
+          //
+          NBPtr->PsPtr->MemPGetPORFreqLimit (NBPtr);
+        }
+      }
+      IDS_OPTION_HOOK (IDS_STRETCH_FREQUENCY_LIMIT, NBPtr, &NBPtr->MemPtr->StdHeader);
+
+      if (MinSpeed > DCTPtr->Timings.TargetSpeed) {
+        MinSpeed = DCTPtr->Timings.TargetSpeed;
+      }
+    }
+  }
+
+  if (MinSpeed == DDR667_FREQUENCY) {
+    NBPtr->StartupSpeed = DDR667_FREQUENCY;
+  }
+
+  // Sync all DCTs to the same speed
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    NBPtr->DCTPtr->Timings.TargetSpeed = MinSpeed;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function waits for all DCTs to be ready
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNSyncDctsReadyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (NBPtr->MCTPtr->DimmValid) {
+    MemNPollBitFieldNb (NBPtr, BFDramEnabled, 1, PCI_ACCESS_TIMEOUT, FALSE);
+    // Re-enable phy compensation engine after Dram init has completed
+    MemNSwitchDCTNb (NBPtr, 0);
+    MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 0);
+  }
+  // Wait 750 us for the phy compensation engine to reinitialize.
+  MemUWait10ns (75000, NBPtr->MemPtr);
+
+  MemNSyncAddrMapToAllNodesNb (NBPtr);
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function create the HT memory map
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNHtMemMapInitNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 BottomIo;
+  UINT32 HoleOffset;
+  UINT32 DctSelBaseAddr;
+  UINT32 NodeSysBase;
+  UINT32 NodeSysLimit;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  DIE_STRUCT *MCTPtr;
+
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  //
+  // Physical addresses in this function are right adjusted by 16 bits ([47:16])
+  // They are BottomIO, HoleOffset, DctSelBaseAddr, NodeSysBase, NodeSysLimit.
+  //
+
+  // Enforce bottom of IO be be 128MB aligned
+  ASSERT ((RefPtr->BottomIo < (_4GB_RJ16 >> 8)) && (RefPtr->BottomIo != 0));
+  BottomIo = (RefPtr->BottomIo & 0xF8) << 8;
+
+  if (!MCTPtr->GangedMode) {
+    DctSelBaseAddr = MCTPtr->DctData[0].Timings.DctMemSize;
+  } else {
+    DctSelBaseAddr = 0;
+  }
+
+  if (MCTPtr->NodeMemSize) {
+    NodeSysBase = NBPtr->SharedPtr->CurrentNodeSysBase;
+    NodeSysLimit = NodeSysBase + MCTPtr->NodeMemSize - 1;
+    DctSelBaseAddr += NodeSysBase;
+
+    if ((NBPtr->IsSupported[ForceEnMemHoleRemapping]) || (RefPtr->MemHoleRemapping)) {
+      if ((NodeSysBase < BottomIo) && (NodeSysLimit >= BottomIo)) {
+        // HW Dram Remap
+        MCTPtr->Status[SbHWHole] = TRUE;
+        RefPtr->GStatus[GsbHWHole] = TRUE;
+        MCTPtr->NodeHoleBase = BottomIo;
+        RefPtr->HoleBase = BottomIo;
+
+        HoleOffset = _4GB_RJ16 - BottomIo;
+
+        NodeSysLimit += HoleOffset;
+
+        if ((DctSelBaseAddr > 0) && (DctSelBaseAddr < BottomIo)) {
+          HoleOffset += DctSelBaseAddr;
+        } else {
+          if (DctSelBaseAddr >= BottomIo) {
+            DctSelBaseAddr += HoleOffset;
+          }
+          HoleOffset += NodeSysBase;
+        }
+
+        MemNSetBitFieldNb (NBPtr, BFDramHoleBase, BottomIo >> 8);
+        MemNSetBitFieldNb (NBPtr, BFDramHoleOffset, HoleOffset >> 7);
+        MemNSetBitFieldNb (NBPtr, BFDramHoleValid, 1);
+
+      } else if (NodeSysBase == BottomIo) {
+        // SW Node Hoist
+        MCTPtr->Status[SbSWNodeHole] = TRUE;
+        RefPtr->GStatus[GsbSpIntRemapHole] = TRUE;
+        RefPtr->GStatus[GsbSoftHole] = TRUE;
+
+        RefPtr->HoleBase = NodeSysBase;
+        DctSelBaseAddr = _4GB_RJ16 + (DctSelBaseAddr - NodeSysBase);
+        NodeSysLimit = _4GB_RJ16 + (NodeSysLimit - NodeSysBase);
+        NodeSysBase = _4GB_RJ16;
+
+      } else if ((NodeSysBase < HT_REGION_BASE_RJ16) && (NodeSysLimit >= HT_REGION_BASE_RJ16)) {
+        if (!NBPtr->SharedPtr->UndoHoistingAbove1TB) {
+          // SW Hoisting above 1TB to avoid HT Reserved region
+          DctSelBaseAddr = _1TB_RJ16 + (DctSelBaseAddr - NodeSysBase);
+          NodeSysLimit = _1TB_RJ16 + (NodeSysLimit - NodeSysBase);
+          NodeSysBase = _1TB_RJ16;
+
+          if (RefPtr->LimitMemoryToBelow1Tb) {
+            // Flag to undo 1TB hoisting after training
+            NBPtr->SharedPtr->UndoHoistingAbove1TB = TRUE;
+          }
+        }
+
+      } else {
+        // No Remapping.  Normal Contiguous mapping
+      }
+    } else {
+      // No Remapping.  Normal Contiguous mapping
+    }
+
+    if (NBPtr->IsSupported[Check1GAlign]) {
+      if (UserOptions.CfgNodeMem1GBAlign) {
+        NBPtr->MemPNodeMemBoundaryNb (NBPtr, (UINT32 *)&NodeSysLimit);
+      }
+    }
+
+    MCTPtr->NodeSysBase = NodeSysBase;
+    MCTPtr->NodeSysLimit = NodeSysLimit;
+    RefPtr->SysLimit = NodeSysLimit;
+    RefPtr->Sub1THoleBase = (NodeSysLimit < HT_REGION_BASE_RJ16) ? (NodeSysLimit + 1) : RefPtr->Sub1THoleBase;
+    IDS_OPTION_HOOK (IDS_MEM_SIZE_OVERLAY, NBPtr, &NBPtr->MemPtr->StdHeader);
+
+    NBPtr->SharedPtr->TopNode = NBPtr->Node;
+
+    NBPtr->SharedPtr->NodeMap[NBPtr->Node].IsValid = TRUE;
+    NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysBase = NodeSysBase;
+    NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysLimit = NodeSysLimit & 0xFFFFFF00;
+
+    MemNSetBitFieldNb (NBPtr, BFDramBaseAddr, NodeSysBase >> (27 - 16));
+    MemNSetBitFieldNb (NBPtr, BFDramLimitAddr, NodeSysLimit >> (27 - 16));
+
+    if ((MCTPtr->DctData[1].Timings.DctMemSize != 0) && (!NBPtr->Ganged)) {
+      MemNSetBitFieldNb (NBPtr, BFDctSelBaseAddr, DctSelBaseAddr >> 11);
+      MemNSetBitFieldNb (NBPtr, BFDctSelHiRngEn, 1);
+      MemNSetBitFieldNb (NBPtr, BFDctSelHi, 1);
+      MemNSetBitFieldNb (NBPtr, BFDctSelBaseOffset, DctSelBaseAddr >> 10);
+    }
+
+    NBPtr->SharedPtr->CurrentNodeSysBase = (NodeSysLimit + 1) & 0xFFFFFFF0;
+  }
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     Program system DRAM map to this node
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSyncAddrMapToAllNodesNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Node;
+  UINT32 NodeSysBase;
+  UINT32 NodeSysLimit;
+  UINT8  WeReMask;
+  MEM_PARAMETER_STRUCT *RefPtr;
+
+  RefPtr = NBPtr->RefPtr;
+  for (Node = 0; Node < NBPtr->NodeCount; Node++) {
+    NodeSysBase = NBPtr->SharedPtr->NodeMap[Node].SysBase;
+    NodeSysLimit = NBPtr->SharedPtr->NodeMap[Node].SysLimit;
+    if (NBPtr->SharedPtr->NodeMap[Node].IsValid) {
+      WeReMask = 3;
+    } else {
+      WeReMask = 0;
+    }
+    // Set the Dram base and set the WE and RE flags in the base.
+    MemNSetBitFieldNb (NBPtr, BFDramBaseReg0 + Node, (NodeSysBase << 8) | WeReMask);
+    MemNSetBitFieldNb (NBPtr, BFDramBaseHiReg0 + Node, NodeSysBase >> 24);
+    // Set the Dram limit and set DstNode.
+    MemNSetBitFieldNb (NBPtr, BFDramLimitReg0 + Node, (NodeSysLimit << 8) | Node);
+    MemNSetBitFieldNb (NBPtr, BFDramLimitHiReg0 + Node, NodeSysLimit >> 24);
+
+    if (RefPtr->GStatus[GsbHWHole]) {
+      MemNSetBitFieldNb (NBPtr, BFDramMemHoistValid, 1);
+      MemNSetBitFieldNb (NBPtr, BFDramHoleBase, (RefPtr->HoleBase >> 8));
+    }
+  }
+
+  NBPtr->FamilySpecificHook[InitExtMMIOAddr] (NBPtr, NULL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function enables power down mode
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNPowerDownCtlNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_PARAMETER_STRUCT *RefPtr;
+  UINT8 PowerDownMode;
+
+  RefPtr = NBPtr->RefPtr;
+
+  // we can't enable powerdown mode when doing WL
+  if (RefPtr->EnablePowerDown) {
+    MemNSetBitFieldNb (NBPtr, BFPowerDownEn, 1);
+    PowerDownMode = (UINT8) ((UserOptions.CfgPowerDownMode == POWER_DOWN_MODE_AUTO) ? POWER_DOWN_BY_CHANNEL : UserOptions.CfgPowerDownMode);
+    IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(NBPtr->MemPtr->StdHeader));
+    if (PowerDownMode) {
+      MemNSetBitFieldNb (NBPtr, BFPowerDownMode, 1);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the Optimal Critical Gross Delay Difference between
+ *   the delay parameters across all Dimms on each bytelane.  Then takes the
+ *   largest of all the bytelanes.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       TrnDly1 - Type of first Gross Delay parameter
+ *     @param[in]       TrnDly2 - Type of second Gross Delay parameter
+ *
+ *     @return  The largest difference between the largest and smallest
+ *               of the two Gross delay types within a single bytelane
+ */
+INT8
+MemNGetOptimalCGDDNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly1,
+  IN       TRN_DLY_TYPE TrnDly2
+  )
+{
+  INT8  CGDD;
+  INT8  GDD;
+  UINT8  Dimm1;
+  UINT8  Dimm2;
+  UINT8  ByteLane;
+  UINT16 CsEnabled;
+  BOOLEAN CGDDInit;
+  BOOLEAN SameDelayType;
+
+  CGDD = 0;
+  CGDDInit = FALSE;
+  SameDelayType = (BOOLEAN) (TrnDly1 == TrnDly2);
+  CsEnabled = NBPtr->DCTPtr->Timings.CsEnabled;
+
+  // If the two delay types compared are the same type, then no need to compare the same
+  // pair twice. Adjustments are made in the upper bound and lower bound of the loop to
+  // handle this.
+  for (Dimm1 = 0; Dimm1 < (SameDelayType ? (MAX_DIMMS_PER_CHANNEL - 1) : MAX_DIMMS_PER_CHANNEL); Dimm1 ++) {
+    if (CsEnabled & (UINT16) (3 << (Dimm1 << 1))) {
+      for (Dimm2 = (SameDelayType ? (Dimm1 + 1) : 0); Dimm2 < MAX_DIMMS_PER_CHANNEL; Dimm2 ++) {
+        if ((CsEnabled & (UINT16) (3 << (Dimm2 << 1)))) {
+          for (ByteLane = 0 ; ByteLane < 8 ; ByteLane++) {
+            // check each byte lane delay pair
+            GDD = (UINT8) (NBPtr->GetTrainDly (NBPtr, TrnDly1, DIMM_BYTE_ACCESS (Dimm1, ByteLane)) >> 5) -
+                  (UINT8) (NBPtr->GetTrainDly (NBPtr, TrnDly2, DIMM_BYTE_ACCESS (Dimm2, ByteLane)) >> 5);
+            // If the 2 delay types to be compared are the same, then keep the absolute difference
+            if (SameDelayType && (GDD < 0)) {
+              GDD = (-GDD);
+            }
+
+            // If CGDD is yet to be initialized, initialize it
+            // Otherwise, keep the largest difference so far
+            CGDD = (!CGDDInit) ? GDD : ((CGDD > GDD) ? CGDD : GDD);
+            if (!CGDDInit) {
+              CGDDInit = TRUE;
+            }
+          }
+        }
+      }
+    }
+  }
+  return CGDD;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the critical delay difference (CDD)
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       TrnDlyType1 - Type of first Gross Delay parameter
+ *     @param[in]       TrnDlyType2 - Type of second Gross Delay parameter
+ *     @param[in]       SameDimm - CDD of same DIMMs
+ *     @param[in]       DiffDimm - CDD of different DIMMs
+ *
+ *     @return          CDD term - in 1/2 MEMCLK
+ */
+INT16
+MemNCalcCDDNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDlyType1,
+  IN       TRN_DLY_TYPE TrnDlyType2,
+  IN       BOOLEAN SameDimm,
+  IN       BOOLEAN DiffDimm
+  )
+{
+  INT16 CDD;
+  INT16 CDDtemp;
+  UINT16 TrnDly1;
+  UINT16 TrnDly2;
+  UINT8 i;
+  UINT8 j;
+  UINT8 ByteLane;
+  UINT16 CsEnabled;
+  BOOLEAN SameDlyType;
+
+  SameDlyType = (BOOLEAN) (TrnDlyType1 == TrnDlyType2);
+  CsEnabled = NBPtr->DCTPtr->Timings.CsEnabled;
+  CDD = -32000;
+  // If the two delay types compared are the same type, then no need to compare the same
+  // pair twice. Adjustments are made in the upper bound and lower bound of the loop to
+  // handle this.
+  for (i = 0; i < (SameDlyType ? (MAX_DIMMS_PER_CHANNEL - 1) : MAX_DIMMS_PER_CHANNEL); i++) {
+    if ((CsEnabled & (UINT16) (3 << (i << 1))) != 0) {
+      for (j = SameDlyType ? (i + 1) : 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+        if (((CsEnabled & (UINT16) (3 << (j << 1))) != 0) && ((SameDimm && (i == j)) || (DiffDimm && (i != j)))) {
+          for (ByteLane = 0; ByteLane < ((NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8); ByteLane++) {
+            /// @todo: Gross delay mask should not be constant.
+            TrnDly1 = GetTrainDlyFromHeapNb (NBPtr, TrnDlyType1, DIMM_BYTE_ACCESS (i, ByteLane)) >> 5;  // Gross delay only
+            TrnDly2 = GetTrainDlyFromHeapNb (NBPtr, TrnDlyType2, DIMM_BYTE_ACCESS (j, ByteLane)) >> 5;  // Gross delay only
+
+            CDDtemp = TrnDly1 - TrnDly2;
+            // If the 2 delay types to be compared are the same, then keep the absolute difference
+            if ((SameDlyType) && (CDDtemp < 0)) {
+              CDDtemp = (-CDDtemp);
+            }
+
+            CDD = (CDD < CDDtemp) ? CDDtemp : CDD;
+          }
+        }
+      }
+    }
+  }
+
+  return CDD;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets DQS timing from data saved in heap.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDlyType - type of delay to be set
+ *     @param[in]   Drbn - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *
+ *     @return      value of the target timing.
+ */
+UINT16
+GetTrainDlyFromHeapNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDlyType,
+  IN       DRBN Drbn
+  )
+{
+  UINT8 Dimm;
+  UINT8 Byte;
+  UINT16 TrainDly;
+  CH_DEF_STRUCT *ChannelPtr;
+  MEM_TECH_BLOCK *TechPtr;
+
+  Dimm = DRBN_DIMM (Drbn);
+  Byte = DRBN_BYTE (Drbn);
+  ChannelPtr = NBPtr->ChannelPtr;
+  TechPtr = NBPtr->TechPtr;
+
+  ASSERT (Dimm < 4);
+  ASSERT (Byte <= ECC_DLY);
+
+  if (NBPtr->MemPstate == MEMORY_PSTATE1) {
+    switch (TrnDlyType) {
+    case AccessRcvEnDly:
+      TrainDly = ChannelPtr->RcvEnDlysMemPs1[Dimm * TechPtr->DlyTableWidth () + Byte];
+      break;
+    case AccessWrDqsDly:
+      TrainDly = ChannelPtr->WrDqsDlysMemPs1[Dimm * TechPtr->DlyTableWidth () + Byte];
+      break;
+    case AccessWrDatDly:
+      TrainDly = ChannelPtr->WrDatDlysMemPs1[Dimm * TechPtr->DlyTableWidth () + Byte];
+      break;
+    case AccessRdDqsDly:
+      TrainDly = ChannelPtr->RdDqsDlysMemPs1[Dimm * TechPtr->DlyTableWidth () + Byte];
+      break;
+    default:
+      TrainDly = 0;
+      IDS_ERROR_TRAP;
+    }
+  } else {
+    switch (TrnDlyType) {
+    case AccessRcvEnDly:
+      TrainDly = ChannelPtr->RcvEnDlys[Dimm * TechPtr->DlyTableWidth () + Byte];
+      break;
+    case AccessWrDqsDly:
+      TrainDly = ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + Byte];
+      break;
+    case AccessWrDatDly:
+      TrainDly = ChannelPtr->WrDatDlys[Dimm * TechPtr->DlyTableWidth () + Byte];
+      break;
+    case AccessRdDqsDly:
+      TrainDly = ChannelPtr->RdDqsDlys[Dimm * TechPtr->DlyTableWidth () + Byte];
+      break;
+    default:
+      TrainDly = 0;
+      IDS_ERROR_TRAP;
+    }
+  }
+
+  return TrainDly;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the fixed MTRRs for common legacy ranges.
+ *   It sets TOP_MEM and TOM2 and some variable MTRRs with WB Uncacheable type.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_FATAL may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ */
+
+BOOLEAN
+MemNCPUMemTypingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 Bottom32bIO;
+  UINT32 Bottom40bIO;
+  UINT32 Cache32bTOP;
+  S_UINT64 SMsr;
+
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  RefPtr = NBPtr->RefPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  //
+  //======================================================================
+  // Set temporary top of memory from Node structure data.
+  // Adjust temp top of memory down to accommodate 32-bit IO space.
+  //======================================================================
+  //Bottom40bIO=top of memory, right justified 16 bits  (defines dram versus IO space type)
+  //Bottom32bIO=sub 4GB top of memory, right justified 16 bits (defines dram versus IO space type)
+  //Cache32bTOP=sub 4GB top of WB cacheable memory, right justified 16 bits
+  //
+  if (RefPtr->HoleBase != 0) {
+    Bottom32bIO = RefPtr->HoleBase;
+  } else if (RefPtr->BottomIo != 0) {
+    Bottom32bIO = (UINT32)RefPtr->BottomIo << (24 - 16);
+  } else {
+    Bottom32bIO = (UINT32)1 << (24 - 16);
+  }
+
+  Cache32bTOP = RefPtr->SysLimit + 1;
+  if (Cache32bTOP < _4GB_RJ16) {
+    Bottom40bIO = 0;
+    if (Bottom32bIO >= Cache32bTOP) {
+      Bottom32bIO = Cache32bTOP;
+    }
+  } else {
+    Bottom40bIO = Cache32bTOP;
+  }
+
+  Cache32bTOP = Bottom32bIO;
+
+
+  //
+  //======================================================================
+  // Set default values for CPU registers
+  //======================================================================
+  //
+  LibAmdMsrRead (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.lo |= 0x1C0000;                // turn on modification enable bit and
+                                      // mtrr enable bits
+  LibAmdMsrWrite (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  SMsr.lo = SMsr.hi = 0x1E1E1E1E;
+  LibAmdMsrWrite (0x250, (UINT64 *)&SMsr, &MemPtr->StdHeader);      // 0 - 512K = WB Mem
+  LibAmdMsrWrite (0x258, (UINT64 *)&SMsr, &MemPtr->StdHeader);      // 512K - 640K = WB Mem
+
+  //
+  //======================================================================
+  // Set variable MTRR values
+  //======================================================================
+  //
+  MemNSetMTRRrangeNb (NBPtr, 0, &Cache32bTOP, 0x200, 6);
+
+  RefPtr->Sub4GCacheTop = Cache32bTOP << 16;
+
+  //
+  //======================================================================
+  // Set TOP_MEM and TOM2 CPU registers
+  //======================================================================
+  //
+  SMsr.hi = Bottom32bIO >> (32 - 16);
+  SMsr.lo = Bottom32bIO << 16;
+  LibAmdMsrWrite (TOP_MEM, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  IDS_HDT_CONSOLE (MEM_FLOW, "TOP_MEM:  %08x0000\n", Bottom32bIO);
+
+  if (Bottom40bIO) {
+    SMsr.hi = Bottom40bIO >> (32 - 16);
+    SMsr.lo = Bottom40bIO << 16;
+  } else {
+    SMsr.hi = 0;
+    SMsr.lo = 0;
+  }
+  LibAmdMsrWrite (TOP_MEM2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  LibAmdMsrRead (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  if (Bottom40bIO) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "TOP_MEM2: %08x0000\n", Bottom40bIO);
+    IDS_HDT_CONSOLE (MEM_FLOW, "Sub1THoleBase: %08x0000\n", RefPtr->Sub1THoleBase);
+    // Enable TOM2
+    SMsr.lo |= 0x00600000;
+  } else {
+    // Disable TOM2
+    SMsr.lo &= ~0x00600000;
+  }
+  SMsr.lo &= 0xFFF7FFFF; // turn off modification enable bit
+  LibAmdMsrWrite (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function runs on the BSP only, it sets the fixed MTRRs for common legacy ranges.
+ *   It sets TOP_MEM and TOM2 and some variable MTRRs with WB Uncacheable type.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNUMAMemTypingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 Bottom32bIO;
+  UINT32 Bottom32bUMA;
+  UINT32 Cache32bTOP;
+  UINT32 Value32;
+  UINT8 BitCount;
+  UINT8 i;
+
+  MEM_PARAMETER_STRUCT *RefPtr;
+  RefPtr = NBPtr->RefPtr;
+  BitCount = 0;
+  //
+  //======================================================================
+  // Adjust temp top of memory down to accommodate UMA memory start
+  //======================================================================
+  // Bottom32bIO=sub 4GB top of memory, right justified 16 bits (defines dram versus IO space type)
+  // Cache32bTOP=sub 4GB top of WB cacheable memory, right justified 16 bits
+  //
+  Bottom32bIO = RefPtr->Sub4GCacheTop >> 16;
+  Bottom32bUMA = RefPtr->UmaBase;
+
+  if (Bottom32bUMA < Bottom32bIO) {
+    Cache32bTOP = Bottom32bUMA;
+    RefPtr->Sub4GCacheTop = Bottom32bUMA << 16;
+    //
+    //======================================================================
+    //Set variable MTRR values
+    //======================================================================
+    //
+    Value32 = Cache32bTOP;
+    //Pre-check the bit count of bottom Uma to see if it is potentially running out of Mtrr while typing.
+    while (Value32 != 0) {
+      i = LibAmdBitScanForward (Value32);
+      Value32 &= ~ (1 << i);
+      BitCount++;
+    }
+
+    if (BitCount > 5) {
+      NBPtr->RefPtr->GStatus[GsbMTRRshort] = TRUE;
+      MemNSetMTRRUmaRegionUCNb (NBPtr, &Cache32bTOP, &Bottom32bIO);
+    } else {
+      MemNSetMTRRrangeNb (NBPtr, 0, &Cache32bTOP, 0x200, 6);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *  Program MTRRs to describe given range as given cache type.  Use MTRR pairs
+ *  starting with the given MTRRphys Base address, and use as many as is
+ *  required up to (excluding) MSR 020C, which is reserved for OS.
+ *
+ *  "Limit" in the context of this procedure is not the numerically correct
+ *  limit, but rather the Last address+1, for purposes of coding efficiency
+ *  and readability.  Size of a region is then Limit-Base.
+ *
+ *  1. Size of each range must be a power of two
+ *  2. Each range must be naturally aligned (Base is same as size)
+ *
+ *  There are two code paths: the ascending path and descending path (analogous
+ *  to bsf and bsr), where the next limit is a function of the next set bit in
+ *  a forward or backward sequence of bits (as a function of the Limit).  We
+ *  start with the ascending path, to ensure that regions are naturally aligned,
+ *  then we switch to the descending path to maximize MTRR usage efficiency.
+ *  Base=0 is a special case where we start with the descending path.
+ *  Correct Mask for region is 2comp(Size-1)-1,
+ *  which is 2comp(Limit-Base-1)-1 *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     Base - Base address[47:16] of specified range.
+ *     @param[in]     *LimitPtr - Limit address[47:16] of specified range.
+ *     @param[in]     MtrrAddr - address of var MTRR pair to start using.
+ *     @param[in]     MtrrType - Cache type for the range.
+ *
+ *     @return      TRUE - No failure occurred
+ *     @return      FALSE - Failure occurred because run out of variable-size MTRRs before completion.
+ */
+
+BOOLEAN
+STATIC
+MemNSetMTRRrangeNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Base,
+  IN OUT   UINT32 *LimitPtr,
+  IN       UINT32 MtrrAddr,
+  IN       UINT8 MtrrType
+  )
+{
+  S_UINT64 SMsr;
+  UINT32 CurBase;
+  UINT32 CurLimit;
+  UINT32 CurSize;
+  UINT32 CurAddr;
+  UINT32 Value32;
+
+  CurBase = Base;
+  CurLimit = *LimitPtr;
+  CurAddr = MtrrAddr;
+
+  while ((CurAddr >= 0x200) && (CurAddr < 0x20A) && (CurBase < *LimitPtr)) {
+    CurSize = CurLimit = (UINT32)1 << LibAmdBitScanForward (CurBase);
+    CurLimit += CurBase;
+    if ((CurBase == 0) || (*LimitPtr < CurLimit)) {
+      CurLimit = *LimitPtr - CurBase;
+      CurSize = CurLimit = (UINT32)1 << LibAmdBitScanReverse (CurLimit);
+      CurLimit += CurBase;
+    }
+
+    // prog. MTRR with current region Base
+    SMsr.lo = (CurBase << 16) | (UINT32)MtrrType;
+    SMsr.hi = CurBase >> (32 - 16);
+    LibAmdMsrWrite (CurAddr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+
+    // prog. MTRR with current region Mask
+    CurAddr++;                              // other half of MSR pair
+    Value32 = CurSize - (UINT32)1;
+    Value32 = ~Value32;
+    SMsr.hi = (Value32 >> (32 - 16)) & NBPtr->VarMtrrHiMsk;
+    SMsr.lo = (Value32 << 16) | ((UINT32)1 << MTRR_VALID);
+    LibAmdMsrWrite (CurAddr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+
+    CurBase = CurLimit;
+    CurAddr++;                              // next MSR pair
+  }
+
+  if (CurLimit < *LimitPtr) {
+    // Announce failure
+    *LimitPtr = CurLimit;
+    IDS_ERROR_TRAP;
+  }
+
+  while ((CurAddr >= 0x200) && (CurAddr < 0x20C)) {
+    SMsr.lo = SMsr.hi = 0;
+    LibAmdMsrWrite (CurAddr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+    CurAddr++;
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     Program one MTRR to describe Uma region as UC cache type if we detect running out of
+ *     Mtrr circumstance.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     *BasePtr - Base address[47:24] of specified range.
+ *     @param[in]     *LimitPtr - Limit address[47:24] of specified range.
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemNSetMTRRUmaRegionUCNb  (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 *BasePtr,
+  IN OUT   UINT32 *LimitPtr
+  )
+{
+  S_UINT64 SMsr;
+  UINT32 Mtrr;
+  UINT32 Size;
+  UINT32 Value32;
+
+  Size = *LimitPtr - *BasePtr;
+  // Check if Size is a power of 2
+  if ((Size & (Size - 1)) != 0) {
+    for (Mtrr = 0x200; Mtrr < 0x20A; Mtrr += 2) {
+      LibAmdMsrRead (Mtrr + 1, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+      if ((SMsr.lo & ((UINT32) 1 << 11)) == 0) {
+        MemNSetMTRRrangeNb (NBPtr, *BasePtr, LimitPtr, Mtrr, 0);
+        break;
+      }
+    }
+    if (Mtrr == 0x20A) {
+      // Run out of MTRRs
+      IDS_ERROR_TRAP;
+    }
+  } else {
+    Mtrr = 0x20A; //Reserved pair of MTRR for UMA region.
+
+    // prog. MTRR with current region Base
+    SMsr.lo = *BasePtr  << 16;
+    SMsr.hi = *BasePtr >> (32 - 16);
+    LibAmdMsrWrite (Mtrr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+
+    // prog. MTRR with current region Mask
+    Mtrr++;                              // other half of MSR pair
+    Value32 = Size - (UINT32)1;
+    Value32 = ~Value32;
+    SMsr.hi = (Value32 >> (32 - 16)) & NBPtr->VarMtrrHiMsk;
+    SMsr.lo = (Value32 << 16) | ((UINT32)1 << MTRR_VALID);
+    LibAmdMsrWrite (Mtrr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     Report the Uma size that is going to be allocated.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          Uma size [31:0] = Addr [47:16]
+ */
+UINT32
+MemNGetUmaSizeNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  return 0;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function allocates 16MB of memory for C6 storage when it is requested to be enabled
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNAllocateC6StorageClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 SysLimit;
+
+  if (IsFeatureEnabled (C6Cstate, NBPtr->MemPtr->PlatFormConfig, &(NBPtr->MemPtr->StdHeader))) {
+    SysLimit = NBPtr->RefPtr->SysLimit;
+    SysLimit -= _16MB_RJ16;
+
+    // Set Dram Limit
+    NBPtr->MCTPtr->NodeSysLimit = SysLimit;
+    NBPtr->RefPtr->SysLimit = SysLimit;
+    MemNSetBitFieldNb (NBPtr, BFDramLimitReg0, ((SysLimit << 8) & 0xFFFF0000));
+
+    // Set TOPMEM and MTRRs
+    MemNC6AdjustMSRs (NBPtr);
+
+    // Set C6Base
+    MemNSetBitFieldNb (NBPtr, BFC6Base, (SysLimit + 1) >> (24 - 16));
+
+    // C6DramLock will be set in FinalizeMCT
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function allocates 16MB of memory for C6 storage when it is requested to be enabled
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNAllocateC6StorageUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8  Node;
+  UINT32 SysLimit;
+  UINT32 DramLimitReg;
+
+  if (NBPtr->SharedPtr->C6Enabled || IsFeatureEnabled (C6Cstate, NBPtr->MemPtr->PlatFormConfig, &(NBPtr->MemPtr->StdHeader))) {
+
+    SysLimit = NBPtr->RefPtr->SysLimit;
+
+    // Calculate new SysLimit
+    if (!NBPtr->SharedPtr->C6Enabled) {
+      if (NBPtr->SharedPtr->NodeIntlv.NodeCnt >= 2) {
+        // Node Interleave is enabled, system memory available is reduced by 16MB * number of nodes
+        SysLimit -= _16MB_RJ16 * NBPtr->SharedPtr->NodeIntlv.NodeCnt;
+      } else {
+        // Otherwise, system memory available is reduced by 16MB
+        SysLimit -= _16MB_RJ16;
+      }
+      NBPtr->RefPtr->SysLimit = SysLimit;
+      NBPtr->SharedPtr->C6Enabled = TRUE;
+
+      // Set TOPMEM and MTRRs (only need to be done once for BSC)
+      MemNC6AdjustMSRs (NBPtr);
+    }
+
+    // Set Dram Limit
+    if (NBPtr->SharedPtr->NodeIntlv.NodeCnt >= 2) {
+      for (Node = 0; Node < NBPtr->NodeCount; Node++) {
+        DramLimitReg = MemNGetBitFieldNb (NBPtr, BFDramLimitReg0 + Node);
+        if ((DramLimitReg & 0xFFFF0000) != 0) {
+          MemNSetBitFieldNb (NBPtr, BFDramLimitReg0 + Node, ((SysLimit << 8) & 0xFFFF0000) | (DramLimitReg & 0xFFFF));
+          MemNSetBitFieldNb (NBPtr, BFDramLimitHiReg0 + Node, SysLimit >> 24);
+        }
+      }
+      // Node Interleave is enabled, CoreStateSaveDestNode points to its own node
+      MemNSetBitFieldNb (NBPtr, BFCoreStateSaveDestNode, NBPtr->Node);
+      NBPtr->MCTPtr->NodeSysLimit = SysLimit;
+    } else {
+      DramLimitReg = MemNGetBitFieldNb (NBPtr, BFDramLimitReg0 + NBPtr->SharedPtr->TopNode) & 0x0000FFFF;
+      MemNSetBitFieldNb (NBPtr, BFDramLimitReg0 + NBPtr->SharedPtr->TopNode, ((SysLimit << 8) & 0xFFFF0000) | DramLimitReg);
+      MemNSetBitFieldNb (NBPtr, BFDramLimitHiReg0 + NBPtr->SharedPtr->TopNode, SysLimit >> 24);
+
+      // Node Interleave is not enabled, CoreStateSaveDestNode points to the node that contains top memory
+      MemNSetBitFieldNb (NBPtr, BFCoreStateSaveDestNode, NBPtr->SharedPtr->TopNode);
+
+      if (NBPtr->Node == NBPtr->SharedPtr->TopNode) {
+        NBPtr->MCTPtr->NodeSysLimit = SysLimit;
+      }
+    }
+
+    // Set BFCC6SaveEn
+    MemNSetBitFieldNb (NBPtr, BFCC6SaveEn, 1);
+
+    // LockDramCfg will be set in FinalizeMCT
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function readjusts TOPMEM and MTRRs after allocating storage for C6
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNC6AdjustMSRs (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 SysLimit;
+  UINT32 CurAddr;
+  S_UINT64 SMsr;
+
+  SysLimit = NBPtr->RefPtr->SysLimit + 1;
+  SMsr.hi = SysLimit >> (32 - 16);
+  SMsr.lo = SysLimit << 16;
+  if (SysLimit < _4GB_RJ16) {
+    LibAmdMsrWrite (TOP_MEM, (UINT64 *)&SMsr, &(NBPtr->MemPtr->StdHeader));
+    IDS_HDT_CONSOLE (MEM_FLOW, "TOP_MEM:  %08x0000\n", SysLimit);
+    // If there is no UMA buffer, then set top of cache and MTRR.
+    // Otherwise, top of cache and MTRR will be set when UMA buffer is set up.
+    if (NBPtr->RefPtr->UmaMode == UMA_NONE) {
+      NBPtr->RefPtr->Sub4GCacheTop = (SysLimit << 16);
+      // Find unused MTRR to set C6 region to UC
+      for (CurAddr = 0x200; CurAddr < 0x20C; CurAddr += 2) {
+        LibAmdMsrRead (CurAddr + 1, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+        if ((SMsr.lo & ((UINT32) 1 << 11)) == 0) {
+          // Set region base as TOM
+          SMsr.hi = SysLimit >> (32 - 16);
+          SMsr.lo = SysLimit << 16;
+          LibAmdMsrWrite (CurAddr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+
+          // set region mask to 16MB
+          SMsr.hi = NBPtr->VarMtrrHiMsk;
+          SMsr.lo = 0xFF000800;
+          LibAmdMsrWrite (CurAddr + 1, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+
+          break;
+        }
+      }
+    }
+  } else {
+    LibAmdMsrWrite (TOP_MEM2, (UINT64 *)&SMsr, &(NBPtr->MemPtr->StdHeader));
+    IDS_HDT_CONSOLE (MEM_FLOW, "TOP_MEM2: %08x0000\n", SysLimit);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     Family-specific hook to override the DdrMaxRate value for families with a
+ *     non-GH-compatible encoding for BFDdrMaxRate
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *DdrMaxRate - Void pointer to DdrMaxRate.  Used as INT16.
+ *
+ *     @return          TRUE
+ *
+ */
+BOOLEAN
+MemNGetMaxDdrRateUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       VOID *DdrMaxRate
+  )
+{
+  UINT8 DdrMaxRateEncoded;
+
+  DdrMaxRateEncoded = (UINT8) MemNGetBitFieldNb (NBPtr, BFDdrMaxRate);
+
+  if (DdrMaxRateEncoded == 0) {
+    * (UINT16 *) DdrMaxRate = UNSUPPORTED_DDR_FREQUENCY;
+  } else {
+    * (UINT16 *) DdrMaxRate = MemNGetMemClkFreqUnb (NBPtr, DdrMaxRateEncoded);
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function performs the action after save/restore execution
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ *
+ */
+
+BOOLEAN
+MemNAfterSaveRestoreUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  // Sync. up DctCfgSel value with NBPtr->Dct
+  MemNSetBitFieldNb (NBPtr, BFDctCfgSel, NBPtr->Dct);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function performs the action before and after excluding dimms on CNB
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  *IsBefore   - If the function is called before excluding dimms
+ *
+ *     @return    TRUE
+ *
+ */
+
+BOOLEAN
+MemNBfAfExcludeDimmClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *IsBefore
+  )
+{
+  if (*(BOOLEAN *) IsBefore == TRUE) {
+    NBPtr->BrdcstSet (NBPtr, BFEnterSelfRef, 1);
+    NBPtr->PollBitField (NBPtr, BFEnterSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+  } else {
+    NBPtr->BrdcstSet (NBPtr, BFExitSelfRef, 1);
+    NBPtr->PollBitField (NBPtr, BFExitSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+  }
+
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnphy.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnphy.c
new file mode 100644
index 0000000000..532c04083b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnphy.c
@@ -0,0 +1,2041 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnphy.c
+ *
+ * Common Northbridge Phy support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 60556 $ @e \$Date: 2011-10-17 20:19:58 -0600 (Mon, 17 Oct 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "PlatformMemoryConfiguration.h"
+#include "heapManager.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_NB_MNPHY_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/// Type of an entry for processing phy init compensation for client NB
+typedef struct {
+  BIT_FIELD_NAME IndexBitField;          ///< Bit field on which the value is decided
+  BIT_FIELD_NAME StartTargetBitField;    ///< First bit field to be modified
+  BIT_FIELD_NAME EndTargetBitField;      ///< Last bit field to be modified
+  UINT16 ExtraValue;                     ///< Extra value needed to be written to bit field
+  CONST UINT16 (*TxPrePN)[3][5];         ///< Pointer to slew rate table
+} PHY_COMP_INIT_CLIENTNB;
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets a delay value a PCI register during training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *
+ *     @return      Value read
+ */
+
+UINT32
+MemNGetTrainDlyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar
+  )
+{
+  return NBPtr->MemNcmnGetSetTrainDly (NBPtr, 0, TrnDly, DrbnVar, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets a delay value a PCI register during training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *
+ */
+
+VOID
+MemNSetTrainDlyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  NBPtr->MemNcmnGetSetTrainDly (NBPtr, 1, TrnDly, DrbnVar, Field);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function executes prototypical Phy fence training function.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNPhyFenceTrainingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  NBPtr->MemPPhyFenceTrainingNb (NBPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function executes prototypical Phy fence training function.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNPhyFenceTrainingUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 FenceThresholdTxDll;
+  UINT8 FenceThresholdRxDll;
+  UINT8 FenceThresholdTxPad;
+  UINT16 Fence2Data;
+
+  // 1. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=10b.
+  // 2. Perform phy fence training.
+  // 3. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdTxDll].
+  MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 2);
+  MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 30, 26, BFPhyFence);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tFenceThresholdTxDll\n");
+  MemNTrainPhyFenceNb (NBPtr);
+  FenceThresholdTxDll = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence);
+  NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdTxDll);
+
+  // 4. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]0F[AlwaysEnDllClks]=001b.
+  MemNSetBitFieldNb (NBPtr, BFAlwaysEnDllClks, 0x1000);
+
+  // 5. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=01b.
+  // 6. Perform phy fence training.
+  // 7. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdRxDll].
+  MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 1);
+  MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 25, 21, BFPhyFence);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFenceThresholdRxDll\n");
+  MemNTrainPhyFenceNb (NBPtr);
+  FenceThresholdRxDll = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence);
+  NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdRxDll);
+
+  // 8. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]0F[AlwaysEnDllClks]=000b.
+  MemNSetBitFieldNb (NBPtr, BFAlwaysEnDllClks, 0x0000);
+
+  // 9. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=11b.
+  // 10. Perform phy fence training.
+  // 11. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdTxPad].
+  MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 3);
+  MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 20, 16, BFPhyFence);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFenceThresholdTxPad\n");
+  MemNTrainPhyFenceNb (NBPtr);
+  FenceThresholdTxPad = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence);
+  NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdTxPad);
+
+  // Program Fence2 threshold for Clk, Cmd, and Addr
+  if (FenceThresholdTxPad < 16) {
+    MemNSetBitFieldNb (NBPtr, BFClkFence2, FenceThresholdTxPad | 0x10);
+    MemNSetBitFieldNb (NBPtr, BFCmdFence2, FenceThresholdTxPad | 0x10);
+    MemNSetBitFieldNb (NBPtr, BFAddrFence2, FenceThresholdTxPad | 0x10);
+  } else {
+    MemNSetBitFieldNb (NBPtr, BFClkFence2, 0);
+    MemNSetBitFieldNb (NBPtr, BFCmdFence2, 0);
+    MemNSetBitFieldNb (NBPtr, BFAddrFence2, 0);
+  }
+
+  // Program Fence2 threshold for data
+  Fence2Data = 0;
+  if (FenceThresholdTxPad < 16) {
+    Fence2Data |= FenceThresholdTxPad | 0x10;
+  }
+  if (FenceThresholdRxDll < 16) {
+    Fence2Data |= (FenceThresholdRxDll | 0x10) << 10;
+  }
+  if (FenceThresholdTxDll < 16) {
+    Fence2Data |= (FenceThresholdTxDll | 0x10) << 5;
+  }
+  MemNSetBitFieldNb (NBPtr, BFDataFence2, Fence2Data);
+  NBPtr->FamilySpecificHook[ProgramFence2RxDll] (NBPtr, &Fence2Data);
+
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    // 18. If motherboard routing requires CS[7:6] to adopt address timings, e.g. 3 LRDIMMs/ch with CS[7:6]
+    // routed across all DIMM sockets, BIOS performs the following:
+    if (GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                               NBPtr->MCTPtr->SocketId,
+                               NBPtr->ChannelPtr->ChannelID) == 3) {
+      if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_NO_LRDIMM_CS67_ROUTING, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) == NULL) {
+      //   A. Program D18F2xA8_dct[1:0][CSTimingMux67] = 1.
+      MemNSetBitFieldNb (NBPtr, BFCSTimingMux67, 1);
+      //   B. Program D18F2x9C_x0D0F_8021_dct[1:0]:
+      //       - DiffTimingEn = 1.
+      //       - IF (D18F2x9C_x0000_0004_dct[1:0][AddrCmdFineDelay] >=
+      //         D18F2x9C_x0D0F_E008_dct[1:0][FenceValue]) THEN Fence = 1 ELSE Fence = 0.
+      //       - Delay = D18F2x9C_x0000_0004_dct[1:0][AddrCmdFineDelay].
+      //
+      MemNSetBitFieldNb (NBPtr, BFDiffTimingEn, 1);
+      MemNSetBitFieldNb (NBPtr, BFFence, (MemNGetBitFieldNb (NBPtr, BFAddrCmdFineDelay) >= MemNGetBitFieldNb (NBPtr, BFFenceValue)) ? 1 : 0);
+      MemNSetBitFieldNb (NBPtr, BFDelay, (MemNGetBitFieldNb (NBPtr, BFAddrCmdFineDelay)));
+    }
+  }
+  }
+
+  // 19. Reprogram F2x9C_04.
+  MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, MemNGetBitFieldNb (NBPtr, BFAddrTmgControl));
+
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function executes Phy fence training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNTrainPhyFenceNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Byte;
+  INT16 Avg;
+  UINT8 PREvalue;
+
+  if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface)) {
+    return;
+  }
+
+  // 1. BIOS first programs a seed value to the phase recovery
+  //    engine registers.
+  //
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tSeeds: ");
+  for (Byte = 0; Byte < MAX_BYTELANES_PER_CHANNEL; Byte++) {
+    // This includes ECC as byte 8
+    MemNSetTrainDlyNb (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (0, Byte), 19);
+    IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", 19);
+  }
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tPhyFenceTrEn = 1");
+  // 2. Set F2x[1, 0]9C_x08[PhyFenceTrEn]=1.
+  MemNSetBitFieldNb (NBPtr, BFPhyFenceTrEn, 1);
+
+  if (!NBPtr->IsSupported[UnifiedNbFence]) {
+    // 3. Wait 200 MEMCLKs.
+    MemNWaitXMemClksNb (NBPtr, 200);
+  } else {
+    // 3. Wait 2000 MEMCLKs.
+    MemNWaitXMemClksNb (NBPtr, 2000);
+  }
+
+  // 4. Clear F2x[1, 0]9C_x08[PhyFenceTrEn]=0.
+  MemNSetBitFieldNb (NBPtr, BFPhyFenceTrEn, 0);
+
+  // 5. BIOS reads the phase recovery engine registers
+  //    F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52.
+  // 6. Calculate the average value of the fine delay and subtract 8.
+  //
+  Avg = 0;
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t  PRE: ");
+  for (Byte = 0; Byte < MAX_BYTELANES_PER_CHANNEL; Byte++) {
+    //
+    // This includes ECC as byte 8.   ECC Byte lane (8) is ignored by MemNGetTrainDlyNb function where
+    // ECC is not supported.
+    //
+    PREvalue = (UINT8) (0x1F & MemNGetTrainDlyNb (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (0, Byte)));
+    Avg = Avg + ((INT16) PREvalue);
+    IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", PREvalue);
+  }
+  Avg = ((Avg + 8) / 9);    // round up
+
+  Avg -= 8;
+  NBPtr->MemNPFenceAdjustNb (NBPtr, &Avg);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFence: %02x\n", Avg);
+
+  // 7. Write the value to F2x[1, 0]9C_x0C[PhyFence].
+  MemNSetBitFieldNb (NBPtr, BFPhyFence, Avg);
+
+  // 8. BIOS rewrites F2x[1, 0]9C_x04, DRAM Address/Command Timing Control
+  //    Register delays for both channels. This forces the phy to recompute
+  //    the fence.
+  //
+  MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, MemNGetBitFieldNb (NBPtr, BFAddrTmgControl));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the DDR phy compensation logic
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitPhyCompNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST UINT8 TableCompRiseSlew20x[] = {7, 3, 2, 2};
+  CONST UINT8 TableCompRiseSlew15x[] = {7, 7, 3, 2};
+  CONST UINT8 TableCompFallSlew20x[] = {7, 5, 3, 2};
+  CONST UINT8 TableCompFallSlew15x[] = {7, 7, 5, 3};
+  UINT8 i;
+  UINT8 j;
+  UINT8 CurrDct;
+  UINT8 CurrChannel;
+  BOOLEAN MarginImprv;
+  MarginImprv = FALSE;
+  CurrDct = NBPtr->Dct;
+  CurrChannel = NBPtr->Channel;
+  if (NBPtr->IsSupported[CheckSlewWithMarginImprv]) {
+    if (NBPtr->MCTPtr->GangedMode == FALSE) {
+      for (i = 0; i < NBPtr->DctCount; i++) {
+        MemNSwitchDCTNb (NBPtr, i);
+        for (j = 0; j < NBPtr->ChannelCount; j++) {
+          NBPtr->SwitchChannel (NBPtr, j);
+          if ((NBPtr->ChannelPtr->Dimms == 4) && ((NBPtr->DCTPtr->Timings.Speed == DDR533_FREQUENCY) || (NBPtr->DCTPtr->Timings.Speed == DDR667_FREQUENCY))) {
+            MarginImprv = TRUE;
+          }
+        }
+      }
+      MemNSwitchDCTNb (NBPtr, CurrDct);
+      NBPtr->SwitchChannel (NBPtr, CurrChannel);
+    }
+  }
+
+  // 1. BIOS disables the phy compensation register by programming F2x9C_x08[DisAutoComp]=1
+  // 2. BIOS waits 5 us for the disabling of the compensation engine to complete.
+  // DisAutoComp will be cleared after Dram init has completed
+  //
+  MemNSwitchDCTNb (NBPtr, 0);
+  MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 1);
+  MemUWait10ns (500, NBPtr->MemPtr);
+  MemNSwitchDCTNb (NBPtr, CurrDct);
+
+  // 3. For each normalized driver strength code read from
+  // F2x[1, 0]9C_x00[AddrCmdDrvStren], program the
+  // corresponding 3 bit predriver code in F2x9C_x0A[D3Cmp1NCal, D3Cmp1PCal].
+  //
+  // 4. For each normalized driver strength code read from
+  // F2x[1, 0]9C_x00[DataDrvStren], program the corresponding
+  // 3 bit predriver code in F2x9C_x0A[D3Cmp0NCal, D3Cmp0PCal, D3Cmp2NCal,
+  // D3Cmp2PCal].
+  //
+  j = (UINT8) MemNGetBitFieldNb (NBPtr, BFAddrCmdDrvStren);
+  i = (UINT8) MemNGetBitFieldNb (NBPtr, BFDataDrvStren);
+
+  MemNSwitchDCTNb (NBPtr, 0);
+  MemNSetBitFieldNb (NBPtr, BFD3Cmp1NCal, TableCompRiseSlew20x[j]);
+  MemNSetBitFieldNb (NBPtr, BFD3Cmp1PCal, TableCompFallSlew20x[j]);
+
+  if (NBPtr->IsSupported[CheckSlewWithMarginImprv]) {
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp0NCal, (MarginImprv) ? 0 : TableCompRiseSlew15x[i]);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp0PCal, (MarginImprv) ? 0 : TableCompFallSlew15x[i]);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp2NCal, (MarginImprv) ? 0 : TableCompRiseSlew15x[i]);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp2PCal, (MarginImprv) ? 0 : TableCompFallSlew15x[i]);
+  }
+  if (NBPtr->IsSupported[CheckSlewWithoutMarginImprv]) {
+    ASSERT (i <= 3);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp0NCal, TableCompRiseSlew15x[i]);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp0PCal, TableCompFallSlew15x[i]);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp2NCal, TableCompRiseSlew15x[i]);
+    MemNSetBitFieldNb (NBPtr, BFD3Cmp2PCal, TableCompFallSlew15x[i]);
+  }
+  MemNSwitchDCTNb (NBPtr, CurrDct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This is a general purpose function that executes before DRAM training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNBeforeDQSTrainingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 ChipSel;
+  UINT32 TestAddrRJ16;
+  UINT32 RealAddr;
+
+  MemTBeginTraining (NBPtr->TechPtr);
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+        if (MemNGetMCTSysAddrNb (NBPtr, ChipSel, &TestAddrRJ16)) {
+
+          RealAddr = MemUSetUpperFSbase (TestAddrRJ16, NBPtr->MemPtr);
+
+          MemUDummyCLRead (RealAddr);
+
+          MemNSetBitFieldNb (NBPtr, BFErr350, 0x8000);
+          MemUWait10ns (60, NBPtr->MemPtr);   // Wait 300ns
+          MemNSetBitFieldNb (NBPtr, BFErr350, 0x0000);
+          MemUWait10ns (400, NBPtr->MemPtr);  // Wait 2us
+          MemUProcIOClFlush (TestAddrRJ16, 1, NBPtr->MemPtr);
+          break;
+        }
+      }
+    }
+    if (NBPtr->IsSupported[CheckEccDLLPwrDnConfig]) {
+      if (!NBPtr->MCTPtr->Status[SbEccDimms]) {
+        MemNSetBitFieldNb (NBPtr, BFEccDLLPwrDnConf, 0x0010);
+      }
+      if (NBPtr->DCTPtr->Timings.Dimmx4Present == 0) {
+        MemNSetBitFieldNb (NBPtr, BFEccDLLConf, 0x0080);
+      }
+    }
+  }
+
+  MemTEndTraining (NBPtr->TechPtr);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *     Returns the parameters for a requested delay value to be used in training
+ *     The correct Min, Max and Mask are determined based on the type of Delay,
+ *     and the frequency
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] TrnDly - Type of delay
+ *     @param[in,out] *Parms - Pointer to the TRN_DLY-PARMS struct
+ *
+ */
+
+VOID
+MemNGetTrainDlyParmsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN OUT   TRN_DLY_PARMS *Parms
+  )
+{
+  Parms->Min = 0;
+
+  if (TrnDly == AccessWrDatDly) {
+    Parms->Max = 0x1F;
+    Parms->Mask = 0x01F;
+  } else if (TrnDly == AccessRdDqsDly) {
+    if ( (NBPtr->IsSupported[CheckMaxRdDqsDlyPtr]) && (NBPtr->DCTPtr->Timings.Speed > DDR667_FREQUENCY) ) {
+      Parms->Max = 0x3E;
+      Parms->Mask = 0x03E;
+    } else {
+      Parms->Max = 0x1F;
+      Parms->Mask = 0x01F;
+    }
+  }
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *     Returns the parameters for a requested delay value to be used in training
+ *     The correct Min, Max and Mask are determined based on the type of Delay,
+ *     and the frequency
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] TrnDly - Type of delay
+ *     @param[in,out] *Parms - Pointer to the TRN_DLY-PARMS struct
+ *
+ */
+
+VOID
+MemNGetTrainDlyParmsClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN OUT   TRN_DLY_PARMS *Parms
+  )
+{
+  Parms->Min = 0;
+
+  if (TrnDly == AccessWrDatDly) {
+    Parms->Max = 0x1F;
+    Parms->Mask = 0x01F;
+  } else if (TrnDly == AccessRdDqsDly) {
+    Parms->Max = 0x3E;
+    Parms->Mask = 0x03E;
+  }
+}
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *     Returns the parameters for a requested delay value to be used in training
+ *     The correct Min, Max and Mask are determined based on the type of Delay,
+ *     and the frequency
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] TrnDly - Type of delay
+ *     @param[in,out] *Parms - Pointer to the TRN_DLY-PARMS struct
+ *
+ */
+
+VOID
+MemNGetTrainDlyParmsUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN OUT   TRN_DLY_PARMS *Parms
+  )
+{
+  Parms->Min = 0;
+
+  if ((TrnDly == AccessWrDatDly) || (TrnDly == AccessRdDqsDly)) {
+    Parms->Max = 0x1F;
+    Parms->Mask = 0x01F;
+  }
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets or set DQS timing during training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+MemNcmnGetSetTrainDlyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  UINT16 Index;
+  UINT16 Offset;
+  UINT32 Value;
+  UINT32 Address;
+  UINT8 Dimm;
+  UINT8 Rank;
+  UINT8 Byte;
+  UINT8 Nibble;
+
+  Dimm = DRBN_DIMM (DrbnVar);
+  Rank = DRBN_RANK (DrbnVar);
+  Byte = DRBN_BYTE (DrbnVar);
+  Nibble = DRBN_NBBL (DrbnVar);
+
+  ASSERT (Dimm < 4);
+  ASSERT (Byte <= ECC_DLY);
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+    Index = 0x10;
+    break;
+  case AccessWrDqsDly:
+    Index = 0x30;
+    break;
+  case AccessWrDatDly:
+    Index = 0x01;
+    break;
+  case AccessRdDqsDly:
+    Index = 0x05;
+    break;
+  case AccessPhRecDly:
+    Index = 0x50;
+    break;
+  default:
+    Index = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+  case AccessWrDqsDly:
+    Index += (Dimm * 3);
+    if (Byte & 0x04) {
+      // if byte 4,5,6,7
+      Index += 0x10;
+    }
+    if (Byte & 0x02) {
+      // if byte 2,3,6,7
+      Index++;
+    }
+    if (Byte > 7) {
+      Index += 2;
+    }
+    Offset = 16 * (Byte % 2);
+    Index |= (Rank << 8);
+    Index |= (Nibble << 9);
+    break;
+
+  case AccessRdDqsDly:
+  case AccessWrDatDly:
+
+    if (NBPtr->IsSupported[DimmBasedOnSpeed]) {
+      if (NBPtr->DCTPtr->Timings.Speed < DDR800_FREQUENCY) {
+        // if DDR speed is below 800, use DIMM 0 delays for all DIMMs.
+        Dimm = 0;
+      }
+    }
+
+    Index += (Dimm * 0x100);
+    if (Nibble) {
+      if (Rank) {
+        Index += 0xA0;
+      } else {
+        Index += 0x70;
+      }
+    } else if (Rank) {
+      Index += 0x60;
+    }
+    // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+    // to run AccessPhRecDly sequence.
+  case AccessPhRecDly:
+    Index += (Byte / 4);
+    Offset = 8 * (Byte % 4);
+    break;
+  default:
+    Offset = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  Address = Index;
+  MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+  MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+  Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+
+  if (TrnDly == AccessRdDqsDly) {
+    NBPtr->FamilySpecificHook[AdjustRdDqsDlyOffset] (NBPtr, &Offset);
+  }
+
+  if (IsSet) {
+    if (TrnDly == AccessPhRecDly) {
+      Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03];
+    }
+
+    Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) ((TrnDly == AccessRcvEnDly) ? 0x1FF : 0xFF) << Offset)));
+    MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+    Address |= DCT_ACCESS_WRITE;
+    MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+    MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+
+    if (TrnDly == AccessPhRecDly) {
+      NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value;
+    }
+  } else {
+    Value = (Value >> Offset) & (UINT32) ((TrnDly == AccessRcvEnDly) ? 0x1FF : 0xFF);
+  }
+
+  return Value;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or set DQS timing during training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+UINT32
+MemNcmnGetSetTrainDlyClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  UINT16 Index;
+  UINT16 Offset;
+  UINT32 Value;
+  UINT32 Address;
+  UINT8 Dimm;
+  UINT8 Byte;
+
+  Dimm = DRBN_DIMM (DrbnVar);
+  Byte = DRBN_BYTE (DrbnVar);
+
+  ASSERT (Dimm < 2);
+  ASSERT (Byte <= ECC_DLY);
+
+  if ((Byte > 7)) {
+    // Llano does not support ECC delay, so:
+    if (IsSet) {
+      // On write, ignore
+      return 0;
+    } else {
+      // On read, redirect to byte 0 to correct fence averaging
+      Byte = 0;
+    }
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+    Index = 0x10;
+    break;
+  case AccessWrDqsDly:
+    Index = 0x30;
+    break;
+  case AccessWrDatDly:
+    Index = 0x01;
+    break;
+  case AccessRdDqsDly:
+    Index = 0x05;
+    break;
+  case AccessPhRecDly:
+    Index = 0x50;
+    break;
+  default:
+    Index = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+  case AccessWrDqsDly:
+    Index += (Dimm * 3);
+    if (Byte & 0x04) {
+      // if byte 4,5,6,7
+      Index += 0x10;
+    }
+    if (Byte & 0x02) {
+      // if byte 2,3,6,7
+      Index++;
+    }
+    Offset = 16 * (Byte % 2);
+    break;
+
+  case AccessRdDqsDly:
+  case AccessWrDatDly:
+    Index += (Dimm * 0x100);
+    // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+    // to run AccessPhRecDly sequence.
+  case AccessPhRecDly:
+    Index += (Byte / 4);
+    Offset = 8 * (Byte % 4);
+    break;
+  default:
+    Offset = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  Address = Index;
+  MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+  Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+
+  if (IsSet) {
+    if (TrnDly == AccessPhRecDly) {
+      Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03];
+    }
+
+    Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) ((TrnDly == AccessRcvEnDly) ? 0x1FF : 0xFF) << Offset)));
+    MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+    Address |= DCT_ACCESS_WRITE;
+    MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+
+    if (TrnDly == AccessPhRecDly) {
+      NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value;
+    }
+    // Gross WrDatDly and WrDqsDly cannot be larger than 4
+    ASSERT (((TrnDly == AccessWrDatDly) || (TrnDly == AccessWrDqsDly)) ? (NBPtr->IsSupported[WLNegativeDelay] || (Field < 0xA0)) : TRUE);
+  } else {
+    Value = (Value >> Offset) & (UINT32) ((TrnDly == AccessRcvEnDly) ? 0x1FF : 0xFF);
+  }
+
+  return Value;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets or set DQS timing during training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+MemNcmnGetSetTrainDlyUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  UINT16 Index;
+  UINT16 Offset;
+  UINT32 Value;
+  UINT32 Address;
+  UINT8 Dimm;
+  UINT8 Rank;
+  UINT8 Byte;
+  UINT8 Nibble;
+  UINT8 DimmNibble;
+
+  Dimm = DRBN_DIMM (DrbnVar);
+  Rank = DRBN_RANK (DrbnVar);
+  Byte = DRBN_BYTE (DrbnVar);
+  Nibble = DRBN_NBBL (DrbnVar);
+  DimmNibble = DRBN_DIMM_NBBL (DrbnVar);
+
+  ASSERT (Dimm < 4);
+  ASSERT (Byte <= ECC_DLY);
+  if ((Byte == ECC_DLY) && !NBPtr->MCTPtr->Status[SbEccDimms]) {
+    // When ECC is not enabled
+    if (IsSet) {
+      // On write, ignore
+      return 0;
+    } else {
+      // On read, redirect to byte 0 to correct fence averaging
+      Byte = 0;
+    }
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+    Index = 0x10;
+    break;
+  case AccessWrDqsDly:
+    Index = 0x30;
+    break;
+  case AccessWrDatDly:
+    Index = 0x01;
+    break;
+  case AccessRdDqsDly:
+    Index = 0x05;
+    break;
+  case AccessRdDqs__Dly:
+    Index = 0x00;
+    break;
+  case AccessPhRecDly:
+    Index = 0x50;
+    break;
+  default:
+    Index = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+  case AccessWrDqsDly:
+    Index += (Dimm * 3);
+    if (Byte & 0x04) {
+      // if byte 4,5,6,7
+      Index += 0x10;
+    }
+    if (Byte & 0x02) {
+      // if byte 2,3,6,7
+      Index++;
+    }
+    if (Byte > 7) {
+      Index += 2;
+    }
+    Offset = 16 * (Byte % 2);
+    Index |= (Rank << 8);
+    Index |= (Nibble << 9);
+    Address = Index;
+    break;
+
+  case AccessRdDqsDly:
+  case AccessWrDatDly:
+
+    if (NBPtr->IsSupported[DimmBasedOnSpeed]) {
+      if (NBPtr->DCTPtr->Timings.Speed < DDR800_FREQUENCY) {
+        // if DDR speed is below 800, use DIMM 0 delays for all DIMMs.
+        Dimm = 0;
+      }
+    }
+
+    Index += (Dimm * 0x100);
+    if (Nibble) {
+      if (Rank) {
+        Index += 0xA0;
+      } else {
+        Index += 0x70;
+      }
+    } else if (Rank) {
+      Index += 0x60;
+    }
+    // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+    // to run AccessPhRecDly sequence.
+  case AccessPhRecDly:
+    Index += (Byte / 4);
+    Offset = 8 * (Byte % 4);
+    Address = Index;
+    break;
+  case AccessRdDqs__Dly:
+    Address = 0x0D0F0000;
+    Index += (DimmNibble >> 1) * 0x100;
+    Index += 0x20;
+    Index = Index + Dimm;
+    Offset = 4 * ((DimmNibble & 0x01) * 2);
+    Address += Index;
+    break;
+  default:
+    Offset = 0;
+    IDS_ERROR_TRAP;
+    Address = Index;
+  }
+  MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+  MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+  Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+  if (TrnDly == AccessRdDqsDly) {
+    NBPtr->FamilySpecificHook[AdjustRdDqsDlyOffset] (NBPtr, &Offset);
+  }
+
+  if (IsSet) {
+    if (TrnDly == AccessPhRecDly) {
+      Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03];
+    }
+    if (TrnDly != AccessRdDqs__Dly) {
+      Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) ((TrnDly == AccessRcvEnDly) ? 0x3FF : 0xFF) << Offset)));
+    } else {
+      Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) 0x1F << Offset)));
+    }
+    MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+    Address |= DCT_ACCESS_WRITE;
+    MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+    MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+    if (TrnDly == AccessPhRecDly) {
+      NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value;
+    }
+  } else {
+    if (TrnDly != AccessRdDqs__Dly) {
+      Value = (Value >> Offset) & (UINT32) ((TrnDly == AccessRcvEnDly) ? 0x3FF : 0xFF);
+    } else {
+      Value = (Value >> Offset) & (UINT32) (0x1F);
+    }
+  }
+  return Value;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function initializes the training pattern.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return      AGESA_STATUS - Result
+ *                  AGESA_SUCCESS - Training pattern is ready to use
+ *                  AGESA_ERROR   - Unable to initialize the pattern.
+ */
+
+AGESA_STATUS
+MemNTrainingPatternInitNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  TRAIN_PATTERN TrainPattern;
+  AGESA_STATUS Status;
+
+  TechPtr = NBPtr->TechPtr;
+  TrainPattern = 0;
+  //
+  // Check the training type
+  //
+  if (TechPtr->TrainingType == TRN_DQS_POSITION) {
+    //
+    // DQS Position Training
+    //
+    if (NBPtr->PosTrnPattern == POS_PATTERN_256B) {
+      //
+      // 256 Bit pattern
+      //
+      if (NBPtr->MCTPtr->Status[Sb128bitmode]) {
+        TrainPattern = TestPatternJD256B;
+        TechPtr->PatternLength = 64;
+      } else {
+        TrainPattern = TestPatternJD256A;
+        TechPtr->PatternLength = 32;
+      }
+    } else {
+      //
+      // 72 bit pattern will be used if PosTrnPattern is not specified
+      //
+      if (NBPtr->MCTPtr->Status[Sb128bitmode]) {
+        TrainPattern = TestPatternJD1B;
+        TechPtr->PatternLength = 18;
+      } else {
+        TrainPattern = TestPatternJD1A;
+        TechPtr->PatternLength = 9;
+      }
+    }
+  } else if (TechPtr->TrainingType == TRN_MAX_READ_LATENCY) {
+    //
+    // Max Read Latency Training
+    //
+    TrainPattern = TestPatternML;
+    TechPtr->PatternLength = (NBPtr->MCTPtr->Status[Sb128bitmode]) ? 6 : 3;
+  } else {
+    //
+    // Error - TechPtr->Training Type must be set to one of the types handled in this function
+    //
+    ASSERT (FALSE);
+  }
+  //
+  // Allocate training buffer
+  //
+  AllocHeapParams.RequestedBufferSize = (TechPtr->PatternLength * 64 * 2) + 16;
+  AllocHeapParams.BufferHandle = AMD_MEM_TRAIN_BUFFER_HANDLE;
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  Status = HeapAllocateBuffer (&AllocHeapParams, &NBPtr->MemPtr->StdHeader);
+  ASSERT (Status == AGESA_SUCCESS);
+  if (Status != AGESA_SUCCESS) {
+    return Status;
+  }
+  TechPtr->PatternBufPtr = AllocHeapParams.BufferPtr;
+  AlignPointerTo16Byte (&TechPtr->PatternBufPtr);
+  TechPtr->TestBufPtr = TechPtr->PatternBufPtr + (TechPtr->PatternLength * 64);
+
+  // Prepare training pattern
+  MemUFillTrainPattern (TrainPattern, TechPtr->PatternBufPtr, TechPtr->PatternLength * 64);
+
+  return Status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function determined the settings for the Reliable Read/Write engine
+ *       for each specific type of training
+ *
+ *     @param[in,out]   *NBPtr      - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *OptParam   - Pointer to an Enum of TRAINING_TYPE
+ *
+ *     @return      TRUE
+ */
+
+BOOLEAN
+MemNSetupHwTrainingEngineUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       VOID *OptParam
+  )
+{
+  TRAINING_TYPE TrnType;
+  RRW_SETTINGS *Rrw;
+
+  TrnType = *(TRAINING_TYPE*) OptParam;
+  Rrw = &NBPtr->RrwSettings;
+  //
+  // Common Settings
+  //
+  Rrw->TgtBankAddressA = CPG_BANK_ADDRESS_A;
+  Rrw->TgtRowAddressA = CPG_ROW_ADDRESS_A;
+  Rrw->TgtColAddressA = CPG_COL_ADDRESS_A;
+  Rrw->TgtBankAddressB = CPG_BANK_ADDRESS_B;
+  Rrw->TgtRowAddressB = CPG_ROW_ADDRESS_B;
+  Rrw->TgtColAddressB = CPG_COL_ADDRESS_B;
+  Rrw->CompareMaskHigh = CPG_COMPARE_MASK_HI;
+  Rrw->CompareMaskLow = CPG_COMPARE_MASK_LOW;
+  Rrw->CompareMaskEcc = CPG_COMPARE_MASK_ECC;
+
+  switch (TrnType) {
+  case TRN_RCVR_ENABLE:
+    //
+    // Receiver Enable Training
+    //
+    NBPtr->TechPtr->PatternLength = 192;
+    break;
+  case TRN_MAX_READ_LATENCY:
+    //
+    // Max Read Latency Training
+    //
+    Rrw->CmdTgt = CMD_TGT_A;
+    NBPtr->TechPtr->PatternLength = 32;
+    Rrw->DataPrbsSeed = PRBS_SEED_32;
+    break;
+  case TRN_DQS_POSITION:
+    //
+    // Read/Write DQS Position training
+    //
+    Rrw->CmdTgt = CMD_TGT_AB;
+    NBPtr->TechPtr->PatternLength = 256;
+    Rrw->DataPrbsSeed = PRBS_SEED_256;
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function finalizes the training pattern.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Index    - Index of Write Data Delay Value
+ *     @param[in,out]   *Value   - Write Data Delay Value
+ *     @return      BOOLEAN - TRUE - Use the value returned.
+ *                            FALSE - No more values in table.
+ */
+
+BOOLEAN
+MemNGetApproximateWriteDatDelayNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Index,
+  IN OUT   UINT8 *Value
+  )
+{
+  CONST UINT8 WriteDatDelayValue[] = {0x10, 0x4, 0x8, 0xC, 0x14, 0x18, 0x1C, 0x1F};
+  if (Index < GET_SIZE_OF (WriteDatDelayValue)) {
+    *Value = WriteDatDelayValue[Index];
+    return TRUE;
+  }
+  return FALSE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function finalizes the training pattern.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return      AGESA_STATUS - Result
+ *                  AGESA_SUCCESS - Training pattern has been finalized.
+ *                  AGESA_ERROR   - Unable to initialize the pattern.
+ */
+
+AGESA_STATUS
+MemNTrainingPatternFinalizeNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  AGESA_STATUS Status;
+  //
+  // Deallocate training buffer
+  //
+  Status = HeapDeallocateBuffer (AMD_MEM_TRAIN_BUFFER_HANDLE, &NBPtr->MemPtr->StdHeader);
+  ASSERT (Status == AGESA_SUCCESS);
+  return Status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function returns the number of chipselects per channel.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return
+ */
+
+UINT8
+MemNCSPerChannelNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  return MAX_CS_PER_CHANNEL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function returns the number of Chipselects controlled by each set
+ *     of Delay registers under current conditions.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return
+ */
+
+UINT8
+MemNCSPerDelayNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  return MAX_CS_PER_DELAY;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function returns the minimum data eye width in 32nds of a UI for
+ *     the type of data eye(Rd/Wr) that is being trained.  This value will
+ *     be the minimum number of consecutive delays that yield valid data.
+ *     Uses TechPtr->Direction to determine read or write.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return
+ */
+
+UINT8
+MemNMinDataEyeWidthNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 MinRdDataeye;
+  UINT8 MinWrDataeye;
+  UINT8 *MinRdWrDataeyePtr;
+
+  MinRdWrDataeyePtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MIN_RD_WR_DATAEYE_WIDTH, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0,
+                                           &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+
+  if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+    if (MinRdWrDataeyePtr != NULL) {
+      MinRdDataeye = MinRdWrDataeyePtr[0];
+      return MinRdDataeye;
+    } else {
+      return MIN_RD_DATAEYE_WIDTH_NB;
+    }
+  } else {
+    if (MinRdWrDataeyePtr != NULL) {
+      MinWrDataeye = MinRdWrDataeyePtr[1];
+      return MinWrDataeye;
+    } else {
+      return MIN_WR_DATAEYE_WIDTH_NB;
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function programs the phy registers according to the desired phy VDDIO voltage level
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNPhyVoltageLevelNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BIT_FIELD_NAME BitField;
+  BIT_FIELD_NAME BFEnd;
+  UINT16 BFValue;
+  UINT16 RegValue;
+
+  BFValue = (UINT16) CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage) << 3;
+  BFEnd = NBPtr->IsSupported[ProgramCsrComparator] ? BFCsrComparator : BFCmpVioLvl;
+
+  for (BitField = BFDataRxVioLvl; BitField <= BFEnd; BitField++) {
+    RegValue = BFValue;
+    if (BitField == BFCsrComparator) {
+      RegValue >>= (3 - 2);
+      // Setting this bit in DCT0 adjusts the comparator for DCT0 and DCT1. Setting this bit in DCT1 has no effect.
+      NBPtr->SwitchDCT (NBPtr, 0);
+      MemNSetBitFieldNb (NBPtr, BitField, RegValue);
+      break;
+    } else if (BitField == BFCmpVioLvl) {
+      RegValue <<= (14 - 3);
+      // Must set this bit on DCT0 even when DCT0 has no memory
+      NBPtr->SwitchDCT (NBPtr, 0);
+      MemNSetBitFieldNb (NBPtr, BitField, RegValue);
+    }
+    MemNBrdcstSetNb (NBPtr, BitField, RegValue);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function adjusts Avg PRE value of Phy fence training according to specific CPU family.
+ *
+ *     @param[in,out]   *NBPtr  - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *Value16 - Pointer to the value that we want to adjust
+ *
+ */
+VOID
+MemNPFenceAdjustUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   INT16 *Value16
+  )
+{
+  *Value16 += 2; //The Avg PRE value is subtracted by 6 only.
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function initializes the DDR phy compensation logic
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitPhyCompClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  // Slew rate table array [x][y][z]
+  // array[0]: slew rate for VDDIO 1.5V
+  // array[1]: slew rate for VDDIO 1.35V
+  // array[2]: slew rate for VDDIO 1.25V
+  // array[x][y]: slew rate for a certain frequency
+  // array[x][y][0]: frequency mask for current entry
+  CONST STATIC UINT16 TxPrePNDataDqs[3][3][5] = {
+    {{ (UINT16) DDR800, 0x924, 0x924, 0x924, 0x924},
+     { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xFF6},
+     { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xFF6}},
+    {{ (UINT16) DDR800, 0xFF6, 0xB6D, 0xB6D, 0x924},
+     { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xFF6},
+     { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xFF6}},
+    {{ (UINT16) DDR800, 0xFF6, 0xDAD, 0xDAD, 0x924},
+     { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xFF6},
+     { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xFF6}}
+  };
+  CONST STATIC UINT16 TxPrePNCmdAddr[3][3][5] = {
+    {{ (UINT16) DDR800, 0x492, 0x492, 0x492, 0x492},
+     { (UINT16) (DDR1066 + DDR1333), 0x6DB, 0x6DB, 0x6DB, 0x6DB},
+     { (UINT16) (DDR1600 + DDR1866), 0xB6D, 0xB6D, 0xB6D, 0xB6D}},
+    {{ (UINT16) DDR800, 0x492, 0x492, 0x492, 0x492},
+     { (UINT16) (DDR1066 + DDR1333), 0x924, 0x6DB, 0x6DB, 0x6DB},
+     { (UINT16) (DDR1600 + DDR1866), 0xB6D, 0xB6D, 0x924, 0x924}},
+    {{ (UINT16) DDR800, 0x492, 0x492, 0x492, 0x492},
+     { (UINT16) (DDR1066 + DDR1333), 0xDAD, 0x924, 0x6DB, 0x492},
+     { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xDAD, 0xB64, 0xB64}}
+  };
+  CONST STATIC UINT16 TxPrePNClock[3][3][5] = {
+    {{ (UINT16) DDR800, 0x924, 0x924, 0x924, 0x924},
+     { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xB6D},
+     { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xFF6}},
+    {{ (UINT16) DDR800, 0xDAD, 0xDAD, 0x924, 0x924},
+     { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xDAD},
+     { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xDAD}},
+    {{ (UINT16) DDR800, 0xDAD, 0xDAD, 0x924, 0x924},
+     { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xFF6},
+     { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xFF6}}
+  };
+
+  CONST PHY_COMP_INIT_CLIENTNB PhyCompInitBitField[] = {
+    // 3. Program TxPreP/TxPreN for Data and DQS according toTable 14 if VDDIO is 1.5V or Table 15 if 1.35V.
+    //    A. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]0[A,6]={0000b, TxPreP, TxPreN}.
+    //    B. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]02={1000b, TxPreP, TxPreN}.
+    {BFDqsDrvStren, BFDataByteTxPreDriverCal2Pad1, BFDataByteTxPreDriverCal2Pad1, 0, TxPrePNDataDqs},
+    {BFDataDrvStren, BFDataByteTxPreDriverCal2Pad2, BFDataByteTxPreDriverCal2Pad2, 0, TxPrePNDataDqs},
+    {BFDataDrvStren, BFDataByteTxPreDriverCal, BFDataByteTxPreDriverCal, 8, TxPrePNDataDqs},
+    // 4. Program TxPreP/TxPreN for Cmd/Addr according toTable 16 if VDDIO is 1.5V or Table 17 if 1.35V.
+    //    A. Program D18F2x[1,0]9C_x0D0F_[C,8][1:0][12,0E,0A,06]={0000b, TxPreP, TxPreN}.
+    //    B. Program D18F2x[1,0]9C_x0D0F_[C,8][1:0]02={1000b, TxPreP, TxPreN}.
+    {BFCsOdtDrvStren, BFCmdAddr0TxPreDriverCal2Pad1, BFCmdAddr0TxPreDriverCal2Pad2, 0, TxPrePNCmdAddr},
+    {BFAddrCmdDrvStren, BFCmdAddr1TxPreDriverCal2Pad1, BFAddrTxPreDriverCal2Pad4, 0, TxPrePNCmdAddr},
+    {BFCsOdtDrvStren, BFCmdAddr0TxPreDriverCalPad0, BFCmdAddr0TxPreDriverCalPad0, 8, TxPrePNCmdAddr},
+    {BFCkeDrvStren, BFAddrTxPreDriverCalPad0, BFAddrTxPreDriverCalPad0, 8, TxPrePNCmdAddr},
+    {BFAddrCmdDrvStren, BFCmdAddr1TxPreDriverCalPad0, BFCmdAddr1TxPreDriverCalPad0, 8, TxPrePNCmdAddr},
+    // 5. Program TxPreP/TxPreN for Clock according toTable 18 if VDDIO is 1.5V or Table 19 if 1.35V.
+    //    A. Program D18F2x[1,0]9C_x0D0F_2[1:0]02={1000b, TxPreP, TxPreN}.
+    {BFClkDrvStren, BFClock0TxPreDriverCalPad0, BFClock1TxPreDriverCalPad0, 8, TxPrePNClock}
+  };
+
+  BIT_FIELD_NAME CurrentBitField;
+  UINT16 SpeedMask;
+  CONST UINT16 (*TxPrePNArray)[5];
+  UINT8 Voltage;
+  UINT8 i;
+  UINT8 j;
+  UINT8 k;
+  UINT8 Dct;
+
+  Dct = NBPtr->Dct;
+  NBPtr->SwitchDCT (NBPtr, 0);
+  // 1. Program D18F2x[1,0]9C_x0D0F_E003[DisAutoComp, DisablePreDriverCal] = {1b, 1b}.
+  MemNSetBitFieldNb (NBPtr, BFDisablePredriverCal, 0x6000);
+  NBPtr->SwitchDCT (NBPtr, Dct);
+
+  SpeedMask = (UINT16) 1 << (NBPtr->DCTPtr->Timings.Speed / 66);
+  Voltage = (UINT8) CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage);
+
+  for (j = 0; j < GET_SIZE_OF (PhyCompInitBitField); j ++) {
+    i = (UINT8) MemNGetBitFieldNb (NBPtr, PhyCompInitBitField[j].IndexBitField);
+    TxPrePNArray = PhyCompInitBitField[j].TxPrePN[Voltage];
+    for (k = 0; k < 3; k ++) {
+      if ((TxPrePNArray[k][0] & SpeedMask) != 0) {
+        for (CurrentBitField = PhyCompInitBitField[j].StartTargetBitField; CurrentBitField <= PhyCompInitBitField[j].EndTargetBitField; CurrentBitField ++) {
+          MemNSetBitFieldNb (NBPtr, CurrentBitField, ((PhyCompInitBitField[j].ExtraValue << 12) | TxPrePNArray[k][i + 1]));
+        }
+        break;
+      }
+    }
+    ASSERT (k < 3);
+  }
+
+  NBPtr->FamilySpecificHook[ForceAutoComp] (NBPtr, NBPtr);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function re-enable phy compensation.
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNReEnablePhyCompNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 Dct;
+
+  Dct = NBPtr->Dct;
+
+  NBPtr->SwitchDCT (NBPtr, 0);
+  // Clear DisableCal and set DisablePredriverCal
+  MemNSetBitFieldNb (NBPtr, BFDisablePredriverCal, 0x2000);
+  NBPtr->SwitchDCT (NBPtr, Dct);
+
+  return TRUE;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function calculates the value of WrDqDqsEarly and programs it into
+ *       the DCT and adds it to the WrDqsGrossDelay of each byte lane on each
+ *       DIMM of the channel.
+ *
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNCalcWrDqDqsEarlyUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT8 Dimm;
+  UINT8 ByteLane;
+  UINT8 *WrDqsDlysPtr;
+  UINT8 WrDqDqsEarly;
+
+  ASSERT ((NBPtr->IsSupported[WLSeedAdjust]) && (NBPtr->IsSupported[WLNegativeDelay]));
+
+  TechPtr = NBPtr->TechPtr;
+  ChannelPtr = NBPtr->ChannelPtr;
+  DCTPtr = NBPtr->DCTPtr;
+
+  ASSERT (NBPtr != NULL);
+  ASSERT (ChannelPtr != NULL);
+  ASSERT (DCTPtr != NULL);
+  //
+  // For each DIMM:
+  // - The Critical Gross Delay (CGD) is the minimum GrossDly of all byte lanes and all DIMMs.
+  // - If (CGD < 0) Then
+  // -   D18F2xA8_dct[1:0][WrDqDqsEarly] = ABS(CGD)
+  // -   WrDqsGrossDly = GrossDly + WrDqDqsEarly
+  // - Else
+  // -   D18F2xA8_dct[1:0][WrDqDqsEarly] = 0.
+  // -   WrDqsGrossDly = GrossDly
+  //
+  WrDqDqsEarly = 0;
+  if (TechPtr->WLCriticalDelay < 0) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCalculating WrDqDqsEarly, adjusting WrDqs.\n");
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMin. Critical Delay: %x\n", TechPtr->WLCriticalDelay);
+    // We've saved the entire negative delay value, so take the ABS and convert to GrossDly.
+    WrDqDqsEarly =  (UINT8) (0x00FF &((((ABS (TechPtr->WLCriticalDelay)) + 0x1F) / 0x20)));
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\tWrDqDqsEarly : %02x\n\n", WrDqDqsEarly);
+    //
+    // Loop through All WrDqsDlys on all DIMMs
+    //
+    for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+      if ((NBPtr->MCTPtr->Status[SbLrdimms]) ? ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << Dimm)) != 0) :
+          ((DCTPtr->Timings.CsEnabled & ((UINT16) 3 << (Dimm << 1))) != 0)) {
+        //
+        // If LRDIMMs, only include the physical dimms, not logical Dimms
+        //
+        IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDimm %x:", Dimm);
+        WrDqsDlysPtr = &(ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ())]);
+        for (ByteLane = 0; ByteLane < TechPtr->DlyTableWidth (); ByteLane++) {
+          WrDqsDlysPtr[ByteLane] += (WrDqDqsEarly << 5);
+          NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqsDlysPtr[ByteLane]);
+          IDS_HDT_CONSOLE (MEM_FLOW, " %02x", WrDqsDlysPtr[ByteLane]);
+        }
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+      }
+    }
+  }
+  MemNSetBitFieldNb (NBPtr, BFWrDqDqsEarly, WrDqDqsEarly);
+  return TRUE;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function forces phy to M0 state
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  *OptParam   - Optional parameter
+ *
+ *     @return  FALSE - always
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNForcePhyToM0Unb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  // 1. Program D18F2x9C_x0D0F_E013_dct[1:0] = 0118h.
+  MemNBrdcstSetNb (NBPtr, BFPllRegWaitTime, 0x118);
+  // 2. Force the phy to M0 with the following sequence:
+  // A. Program D18F2x9C_x0D0F_E006_dct[1:0][PllLockTime] = 190h. Restore the default PLL lock time.
+  MemNBrdcstSetNb (NBPtr, BFPllLockTime, NBPtr->FreqChangeParam->PllLockTimeDefault);
+  // B. For each DCT: Program D18F2x9C_x0000_000B_dct[1:0] = 80800000h.
+  MemNBrdcstSetNb (NBPtr, BFDramPhyStatusReg, 0x80800000);
+  NBPtr->SwitchDCT (NBPtr, 0);
+  // C. Program D18F2x9C_x0D0F_E018_dct[0][PhyPSMasterChannel] = 0.
+  MemNSetBitFieldNb (NBPtr, BFPhyPSMasterChannel, 0);
+  // D. Program D18F2x9C_x0000_000B_dct[0] = 40000000h. CH0 only;
+  MemNSetBitFieldNb (NBPtr, BFDramPhyStatusReg, 0x40000000);
+  // E. For each DCT: Program D18F2x9C_x0000_000B_dct[1:0] = 80000000h.
+  MemNBrdcstSetNb (NBPtr, BFDramPhyStatusReg, 0x80000000);
+
+  return FALSE;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function sets SkewMemClk before enabling MemClk
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  *OptParam   - Optional parameter
+ *
+ *     @return  TRUE - always
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNSetSkewMemClkUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 Dct;
+
+  // SkewMemClk is set to 1 if all DCTs are enabled, else 0.
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    MemNSwitchDCTNb (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize == 0) {
+    break;
+    }
+  }
+  MemNSwitchDCTNb (NBPtr, 0);
+  if (Dct == NBPtr->DctCount) {
+    MemNSetBitFieldNb (NBPtr, BFSkewMemClk, 0x10);
+  } else {
+    MemNSetBitFieldNb (NBPtr, BFSkewMemClk, 0);
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function masks the RdDqsDly Bit 0 before writing to register for UNB.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *Offset -  Bit offset of the field to be programmed
+ *
+ *     @return    TRUE
+ */
+BOOLEAN
+MemNAdjustRdDqsDlyOffsetUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *Offset
+  )
+{
+  *(UINT16*) Offset = *(UINT16*) Offset + 1;
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     This function delays MEMCLK to prevent WrDqs skew due to negative PRE result.
+ *
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNCalcWrDqDqsEarlyClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  DCT_STRUCT     *DCTPtr;
+  CH_DEF_STRUCT  *ChannelPtr;
+  UINT8  Dimm;
+  UINT8  ByteLane;
+  UINT8  *WrDqsDlysPtr;
+  UINT8  NewClkDllDelay;
+  UINT16 ClkDllFineDly;
+  UINT32 AddrCmdTmg;
+
+  TechPtr = NBPtr->TechPtr;
+  ChannelPtr = NBPtr->ChannelPtr;
+  DCTPtr = NBPtr->DCTPtr;
+
+  ASSERT (NBPtr != NULL);
+  ASSERT (ChannelPtr != NULL);
+  ASSERT (DCTPtr != NULL);
+
+  if (NBPtr->IsSupported[WLNegativeDelay]) {
+    if (TechPtr->WLCriticalDelay < 0) {
+      NewClkDllDelay =  (UINT8) ABS (TechPtr->WLCriticalDelay);
+
+      // Prepare new delay for MEMCLK
+      ClkDllFineDly = (UINT16) ((MemNGetBitFieldNb (NBPtr, BFPhyClkDllFine0) & 0xBF60) | NewClkDllDelay);
+
+      // Program bit 7(FenceBit) = 1 if NewClkDllDelay >= > F2x9C[FenceThresholdTxPad], else 0.
+      ClkDllFineDly |= (NewClkDllDelay >= MemNGetBitFieldNb (NBPtr, BFPhyFence)) ? 0x80 : 0;
+
+      // Apply new delay to both chiplets
+      MemNSetBitFieldNb (NBPtr, BFPhyClkDllFine0, ClkDllFineDly | 0x4000);
+      MemNSetBitFieldNb (NBPtr, BFPhyClkDllFine0, ClkDllFineDly);
+      MemNSetBitFieldNb (NBPtr, BFPhyClkDllFine1, ClkDllFineDly | 0x4000);
+      MemNSetBitFieldNb (NBPtr, BFPhyClkDllFine1, ClkDllFineDly);
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tShift MemClk, AddrCmd, CsOdt, Cke by %d to eliminate negative WL\n", NewClkDllDelay);
+
+      //
+      // Adjust AddrCmd/CsOdt/Cke timing by amount MemClk was delayed
+      //
+      AddrCmdTmg = MemNGetBitFieldNb (NBPtr, BFAddrTmgControl);
+      AddrCmdTmg += (NewClkDllDelay << 16) | (NewClkDllDelay << 8) | NewClkDllDelay;
+      AddrCmdTmg &= 0x003F3F3F;
+      MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, AddrCmdTmg);
+
+      //
+      // Adjust all WrDqsDlys on all DIMMs of the current channel
+      //
+      for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+        if ((DCTPtr->Timings.CsEnabled & ((UINT16)3 << (Dimm << 1))) != 0) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCS%d\n\t\t\tWrDqs:", Dimm << 1);
+          WrDqsDlysPtr = &(ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ())]);
+          for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+            WrDqsDlysPtr[ByteLane] = (UINT8) (WrDqsDlysPtr[ByteLane] + NewClkDllDelay);
+            NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqsDlysPtr[ByteLane]);
+            IDS_HDT_CONSOLE (MEM_FLOW, " %02x", WrDqsDlysPtr[ByteLane]);
+          }
+          IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+        }
+      }
+    }
+  }
+
+  return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     This function initializes RxEn Delays for RxEn seedless training
+ *
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNInitializeRxEnSeedlessTrainingUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 ByteLane;
+  // Save original PRE based RxEnDly for RxEn Seedless training
+  for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+    NBPtr->TechPtr->RxOrig[ByteLane] = NBPtr->ChannelPtr->RcvEnDlys[(NBPtr->TechPtr->ChipSel >> 1) * NBPtr->TechPtr->DlyTableWidth () + ByteLane];
+  }
+  return TRUE;
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function checks each bytelane for no window error.
+ *
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNTrackRxEnSeedlessRdWrNoWindBLErrorUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  MemTTrackRxEnSeedlessRdWrNoWindBLError (NBPtr->TechPtr, OptParam);
+  return TRUE;
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *      This function checks each bytelane for small window error.
+ *
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNTrackRxEnSeedlessRdWrSmallWindBLErrorUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  MemTTrackRxEnSeedlessRdWrSmallWindBLError (NBPtr->TechPtr, OptParam);
+  return TRUE;
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *      This function initializes a ByteLaneError error.
+ *
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNInitialzeRxEnSeedlessByteLaneErrorUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 ByteLane;
+  for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+    NBPtr->TechPtr->ByteLaneError[ByteLane] = FALSE; // All Bytelanes have no errors
+  }
+  return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     This function sets phy power saving related settings in different MPstate context.
+ *
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return    none
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNPhyPowerSavingMPstateUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  STATIC UINT8 Sequence[] = {8, 4, 3, 5, 2, 6, 1, 7, 0};
+  UINT16 DllPower[9];
+  UINT8 NumLanes;
+  UINT8 DllWakeTime;
+  UINT8 MaxRxStggrDly;
+  UINT8 MinRcvEnGrossDly;
+  UINT8 MinWrDatGrossDly;
+  UINT8 dRxStggrDly;
+  UINT8 dTxStggrDly;
+  UINT8 TempStggrDly;
+  UINT8 MaxTxStggrDly;
+  UINT8 Tcwl;
+  UINT8 i;
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "Start Phy power saving setting for memory Pstate %d\n", NBPtr->MemPstate);
+  // 4. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyU] = 1b.
+  // 5. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyL] = 1b.
+  // 6. D18F2x9C_x0D0F_0[F,7:0][53,13]_dct[1:0][RxDqsUDllPowerDown] = 1.
+  MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F13, MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0F13) | 0x83);
+  // 7. D18F2x9C_x0D0F_812F_dct[1:0][PARTri] = ~D18F2x90_dct[1:0][ParEn].
+  // 8. D18F2x9C_x0D0F_812F_dct[1:0][Add17Tri, Add16Tri] = {1b, 1b}
+  if (NBPtr->MemPstate == MEMORY_PSTATE0) {
+    MemNSetBitFieldNb (NBPtr, BFAddrCmdTri, MemNGetBitFieldNb (NBPtr, BFAddrCmdTri) | 0xA1);
+  }
+  // 9. IF (DimmsPopulated == 1)&& ((D18F2x9C_x0000_0000_dct[1:0]_mp[1:0][CkeDrvStren]==010b) ||
+  // (D18F2x9C_x0000_0000_dct[1:0]_mp[1:0][CkeDrvStren]==011b)) THEN THEN
+  // program D18F2x9C_x0D0F_C0[40,00]_dct[1:0][LowPowerDrvStrengthEn] = 1
+  // ELSE program D18F2x9C_x0D0F_C0[40,00]_dct[1:0][LowPowerDrvStrengthEn] = 0 ENDIF.
+  if ((NBPtr->ChannelPtr->Dimms == 1) && ((MemNGetBitFieldNb (NBPtr, BFCkeDrvStren) == 2) || (MemNGetBitFieldNb (NBPtr, BFCkeDrvStren) == 3))) {
+    MemNSetBitFieldNb (NBPtr, BFReserved00C, 0x100);
+  }
+  // 10. Program D18F2x9C_x0D0F_0[F,7:0][50,10]_dct[1:0][EnRxPadStandby] = IF
+  // (D18F2x94_dct[1:0][MemClkFreq] <= 800 MHz) THEN 1 ELSE 0 ENDIF.
+  MemNSetBitFieldNb (NBPtr, BFEnRxPadStandby, (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) ? 0x1000 : 0);
+  // 11. Program D18F2x9C_x0000_000D_dct[1:0]_mp[1:0] as follows:
+  // If (DDR rate < = 1600) TxMaxDurDllNoLock = RxMaxDurDllNoLock = 8h
+  // else TxMaxDurDllNoLock = RxMaxDurDllNoLock = 7h.
+  if (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) {
+    MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 8);
+    MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 8);
+  } else {
+    MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 7);
+    MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 7);
+  }
+  // TxCPUpdPeriod = RxCPUpdPeriod = 011b.
+  MemNSetBitFieldNb (NBPtr, BFTxCPUpdPeriod, 3);
+  MemNSetBitFieldNb (NBPtr, BFRxCPUpdPeriod, 3);
+  // TxDLLWakeupTime = RxDLLWakeupTime = 11b.
+  MemNSetBitFieldNb (NBPtr, BFTxDLLWakeupTime, 3);
+  MemNSetBitFieldNb (NBPtr, BFRxDLLWakeupTime, 3);
+
+  if (NBPtr->IsSupported[DllStaggerEn]) {
+    // 12. Program D18F2x9C_x0D0F_0[F,7:0][5C,1C]_dct[1:0] as follows.
+    // Let Numlanes = 8. = 9 with ECC.
+    NumLanes = (NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8;
+    // RxDllStggrEn = TxDllStggrEn = 1.
+    for (i = 0; i < 9; i ++) {
+      DllPower[i] = 0x8080;
+    }
+    // If (DDR rate > = 1866) DllWakeTime = 1, Else DllWakeTime = 0.
+    DllWakeTime = (NBPtr->DCTPtr->Timings.Speed >= DDR1866_FREQUENCY) ? 1 : 0;
+    // Let MaxRxStggrDly = (Tcl*2) + MIN(DqsRcvEnGrossDelay for all byte lanes (see D18F2x9C_x0000_00[2A:10]_dct[1:0]_mp[1:0])) - 4.
+    MinRcvEnGrossDly = NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessRcvEnDly, FALSE);
+    ASSERT ((NBPtr->DCTPtr->Timings.CasL * 2 + MinRcvEnGrossDly) >= 4);
+    MaxRxStggrDly = NBPtr->DCTPtr->Timings.CasL * 2 + MinRcvEnGrossDly - 4;
+    // Let (real) dRxStggrDly = (MaxRxStggrDly - DllWakeTime) / (Numlanes - 1).
+    ASSERT (MaxRxStggrDly >= DllWakeTime);
+    dRxStggrDly = (MaxRxStggrDly - DllWakeTime) / (NumLanes - 1);
+    IDS_HDT_CONSOLE (MEM_FLOW, "\tMinimum RcvEnGrossDly: 0x%02x MaxRxStggrDly: 0x%02x dRxStggrDly: 0x%02x\n", MinRcvEnGrossDly, MaxRxStggrDly, dRxStggrDly);
+    // For each byte lane in the ordered sequence {8, 4, 3, 5, 2, 6, 1, 7, 0}, program RxDllStggrDly[5:0] = an
+    // increasing value, starting with 0 for the first byte lane in the sequence and increasing at a rate of dRxStggrDly
+    // for each subsequent byte lane. Convert the real to integer by rounding down or using C (int) typecast after linearization.
+    i = 9 - NumLanes;
+    TempStggrDly = 0;
+    for (; i < 9; i ++) {
+      DllPower[Sequence[i]] |= ((TempStggrDly & 0x3F) << 8);
+      TempStggrDly = TempStggrDly + dRxStggrDly;
+    }
+
+    // Let MaxTxStggrDly = (Tcwl*2) + MIN(MIN (WrDatGrossDly for all byte lanes (see
+    // D18F2x9C_x0000_0[3:0]0[2:1]_dct[1:0]_mp[1:0])), MIN(DqsRcvEnGrossDelay for all byte lanes (see
+    // D18F2x9C_x0000_00[2A:10]_dct[1:0]_mp[1:0])) - 4.
+    Tcwl = (UINT8) MemNGetBitFieldNb (NBPtr, BFTcwl);
+    MinWrDatGrossDly = NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessWrDatDly, FALSE);
+    MaxTxStggrDly = Tcwl * 2 + MIN (MinRcvEnGrossDly, MinWrDatGrossDly) - 4;
+    // Let dTxStggrDly = (MaxTxStggrDly - DllWakeTime) / (Numlanes - 1).
+    ASSERT (MaxTxStggrDly >= DllWakeTime);
+    dTxStggrDly = (MaxTxStggrDly - DllWakeTime) / (NumLanes - 1);
+    // For each byte lane in the ordered sequence {8, 4, 3, 5, 2, 6, 1, 7, 0}, program TxDllStggrDly[5:0] = an
+    // increasing integer value, starting with 0 for the first byte lane in the sequence and increasing at a rate of
+    // dTxStggrDly for each subsequent byte lane.
+    IDS_HDT_CONSOLE (MEM_FLOW, "\tMinimum WrDatGrossDly: 0x%02x MaxTxStggrDly: 0x%02x dTxStggrDly: 0x%02x\n", MinWrDatGrossDly, MaxTxStggrDly, dTxStggrDly);
+    i = 9 - NumLanes;
+    TempStggrDly = 0;
+    for (; i < 9; i ++) {
+      DllPower[Sequence[i]] |= (TempStggrDly & 0x3F);
+      TempStggrDly = TempStggrDly + dTxStggrDly;
+    }
+
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tByte Lane    :  ECC   07   06   05   04   03   02   01   00\n");
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tDll Power    : %04x %04x %04x %04x %04x %04x %04x %04x %04x\n",
+                     DllPower[8], DllPower[7], DllPower[6], DllPower[5], DllPower[4], DllPower[3], DllPower[2], DllPower[1], DllPower[0]);
+
+    for (i = 0; i < NumLanes; i ++) {
+      MemNSetBitFieldNb (NBPtr, BFDataByteDllPowerMgnByte0 + i, (MemNGetBitFieldNb (NBPtr, BFDataByteDllPowerMgnByte0 + i) & 0x4040) | DllPower[i]);
+    }
+  }
+  // 13. Program D18F2x248_dct[1:0]_mp[1:0] and then D18F2x9C_x0D0F_0[F,7:0][53,13]_dct[1:0] as follows:
+  // For M1 context program RxChMntClkEn=RxSsbMntClkEn=0.
+  // For M0 context program RxChMntClkEn=RxSsbMntClkEn=1.
+  if (NBPtr->MemPstate == MEMORY_PSTATE1) {
+    MemNSetBitFieldNb (NBPtr, BFRxChMntClkEn, 0);
+    MemNSetBitFieldNb (NBPtr, BFRxSsbMntClkEn, 0);
+  } else {
+    MemNSetBitFieldNb (NBPtr, BFRxChMntClkEn, 1);
+    MemNSetBitFieldNb (NBPtr, BFRxSsbMntClkEn, 0x100);
+  }
+
+  IDS_OPTION_HOOK (IDS_PHY_DLL_STANDBY_CTRL, NBPtr, &NBPtr->MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function resets RxFifo pointer during Read DQS training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *OptParam - Optional parameter
+ *
+ *     @return    TRUE
+ */
+
+BOOLEAN
+MemNResetRxFifoPtrClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+    MemNSetBitFieldNb (NBPtr, BFRxPtrInitReq, 1);
+    MemNPollBitFieldNb (NBPtr, BFRxPtrInitReq, 0, PCI_ACCESS_TIMEOUT, FALSE);
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *      This function adjusts the Phase Mask based on ECC.
+ *
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNAdjust2DPhaseMaskBasedOnEccUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  NBPtr->PhaseLaneMask = NBPtr->PhaseLaneMask & (UINT32) (NBPtr->MCTPtr->Status[SbEccDimms] ? 0x0FFFF : 0x3FFFF);
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnreg.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnreg.c
new file mode 100644
index 0000000000..cbf2dc78e1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mnreg.c
@@ -0,0 +1,551 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnreg.c
+ *
+ * Common Northbridge register access functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "merrhdl.h"
+#include "heapManager.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_MNREG_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the current DCT to work on.
+ *   Should be called before accessing a certain DCT
+ *   All data structures will be updated to point to the current DCT
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Dct - ID of the target DCT
+ *
+ */
+
+VOID
+MemNSwitchDCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  )
+{
+  ASSERT (NBPtr->DctCount > Dct);
+  //
+  // Set the DctCfgSel to new DCT
+  //
+  NBPtr->FamilySpecificHook[DCTSelectSwitch] (NBPtr, &Dct);
+  NBPtr->Dct = Dct;
+  NBPtr->MCTPtr->Dct = NBPtr->Dct;
+  NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]);
+  NBPtr->PsPtr = &(NBPtr->PSBlock[NBPtr->Dct]);
+  NBPtr->DctCachePtr = &(NBPtr->DctCache[NBPtr->Dct]);
+
+  MemNSwitchChannelNb (NBPtr, NBPtr->Channel);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is used by families that use a separate DctCfgSel bit to
+ *     select the current DCT which will be accessed by function 2.
+ *     NOTE:  This function must be called BEFORE the NBPtr->Dct variable is
+ *     updated.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *Dct     - Pointer to ID of the target DCT
+ *
+ */
+
+BOOLEAN
+MemNDctCfgSelectUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       VOID *Dct
+  )
+{
+  //
+  // Sanity check the current DctCfgSel setting
+  //
+  ASSERT (NBPtr->Dct == NBPtr->GetBitField (NBPtr, BFDctCfgSel));
+  //
+  // Set the DctCfgSel to new DCT
+  //
+  NBPtr->SetBitField (NBPtr, BFDctCfgSel, *(UINT8*)Dct);
+
+  return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the current channel to work on.
+ *   Should be called before accessing a certain channel
+ *   All data structures will be updated to point to the current channel
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Channel - ID of the target channel
+ *
+ */
+
+VOID
+MemNSwitchChannelNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  )
+{
+  NBPtr->Channel = Channel ? 1 : 0;
+  NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[NBPtr->Channel]);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets a bit field from PCI register
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Field name
+ *
+ *     @return      Bit field value
+ */
+
+UINT32
+MemNGetBitFieldNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName
+  )
+{
+  UINT32 Value;
+
+  ASSERT (FieldName < BFEndOfList);
+  Value = NBPtr->MemNCmnGetSetFieldNb (NBPtr, 0, FieldName, 0);
+  return Value;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets a bit field from PCI register
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Field name
+ *     @param[in]   Field - Value to be stored in PCT register
+ *
+ */
+
+VOID
+MemNSetBitFieldNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  ASSERT (FieldName < BFEndOfList);
+  NBPtr->MemNCmnGetSetFieldNb (NBPtr, 1, FieldName, Field);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Check if bitfields of all enabled DCTs on a die have the expected value. Ignore
+ *  DCTs that are disabled.
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Bit Field name
+ *     @param[in]   Field - Value to be checked
+ *
+ *     @return          TRUE -  All enabled DCTs have the expected value on the bitfield.
+ *     @return          FALSE - Not all enabled DCTs have the expected value on the bitfield.
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNBrdcstCheckNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  UINT8 Dct;
+  UINT8 CurrentDCT;
+  Dct = NBPtr->Dct;
+  for (CurrentDCT = 0; CurrentDCT < NBPtr->DctCount; CurrentDCT++) {
+    MemNSwitchDCTNb (NBPtr, CurrentDCT);
+    if ((NBPtr->DCTPtr->Timings.DctMemSize != 0) && !((CurrentDCT == 1) && NBPtr->Ganged)) {
+      if (MemNGetBitFieldNb (NBPtr, FieldName) != Field) {
+        MemNSwitchDCTNb (NBPtr, Dct);
+        return FALSE;
+      }
+    }
+  }
+  MemNSwitchDCTNb (NBPtr, Dct);
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Set bitfields of all enabled DCTs on a die to a value. Ignore
+ *  DCTs that are disabled.
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Bit Field name
+ *     @param[in]   Field - Value to be set
+ *
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNBrdcstSetNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  UINT8 Dct;
+  UINT8 CurrentDCT;
+  Dct = NBPtr->Dct;
+  for (CurrentDCT = 0; CurrentDCT < NBPtr->DctCount; CurrentDCT++) {
+    MemNSwitchDCTNb (NBPtr, CurrentDCT);
+    if ((NBPtr->DCTPtr->Timings.DctMemSize != 0) && !((CurrentDCT == 1) && NBPtr->Ganged)) {
+      MemNSetBitFieldNb (NBPtr, FieldName, Field);
+    }
+  }
+  MemNSwitchDCTNb (NBPtr, Dct);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *      This function calculates the memory channel index relative to the
+ *      socket, taking the Die number, the Dct, and the channel.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] Dct
+ *     @param[in] Channel
+ *
+ */
+UINT8
+MemNGetSocketRelativeChannelNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct,
+  IN       UINT8 Channel
+  )
+{
+  return ((NBPtr->MCTPtr->DieId * NBPtr->DctCount) + Dct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Poll a bitfield. If the bitfield does not get set to the target value within
+ *  specified microseconds, it times out.
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Bit Field name
+ *     @param[in]   Field - Value to be set
+ *     @param[in]   MicroSecond - Number of microsecond to wait
+ *     @param[in]   IfBroadCast - Need to broadcast to both DCT or not
+ *
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNPollBitFieldNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field,
+  IN       UINT32 MicroSecond,
+  IN       BOOLEAN IfBroadCast
+  )
+{
+  BOOLEAN ErrorRecovery;
+  BOOLEAN IgnoreErr;
+  UINT8 ExcludeDCT;
+  UINT16 ExcludeChipSelMask;
+  UINT32 EventInfo;
+  UINT64 InitTSC;
+  UINT64 CurrentTSC;
+  UINT64 TimeOut;
+  AGESA_STATUS EventClass;
+  MEM_DATA_STRUCT *MemPtr;
+  DIE_STRUCT *MCTPtr;
+  BOOLEAN TimeoutEn;
+
+  MemPtr = NBPtr->MemPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  ExcludeDCT = EXCLUDE_ALL_DCT;
+  ExcludeChipSelMask = EXCLUDE_ALL_CHIPSEL;
+  TimeoutEn = TRUE;
+  IDS_TIMEOUT_CTL (&TimeoutEn);
+
+  CurrentTSC = 0;
+  LibAmdMsrRead (TSC, &InitTSC, &MemPtr->StdHeader);
+  TimeOut = InitTSC + ((UINT64) MicroSecond * MemPtr->TscRate);
+
+  while ((CurrentTSC < TimeOut) || !TimeoutEn) {
+    if (IfBroadCast) {
+      if (NBPtr->BrdcstCheck (NBPtr, FieldName, Field)) {
+        break;
+      }
+    } else {
+      if (MemNGetBitFieldNb (NBPtr, FieldName) == Field) {
+        break;
+      }
+    }
+    LibAmdMsrRead (TSC, &CurrentTSC, &MemPtr->StdHeader);
+  }
+
+  if ((CurrentTSC >= TimeOut) && TimeoutEn) {
+    ErrorRecovery = TRUE;
+    IgnoreErr = FALSE;
+    IDS_OPTION_HOOK (IDS_MEM_ERROR_RECOVERY, &ErrorRecovery, &MemPtr->StdHeader);
+    IDS_OPTION_HOOK (IDS_MEM_IGNORE_ERROR, &IgnoreErr, &MemPtr->StdHeader);
+
+    // Default event class
+    // If different event class is needed in one entry, override it.
+    EventClass = AGESA_ERROR;
+    switch (FieldName) {
+    case BFDramEnabled:
+      EventInfo = MEM_ERROR_DRAM_ENABLED_TIME_OUT;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tDramEnabled bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFDctAccessDone:
+      EventInfo = MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT;
+      ExcludeDCT = NBPtr->Dct;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tDctAccessDone bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFSendCtrlWord:
+      EventInfo = MEM_ERROR_SEND_CTRL_WORD_TIME_OUT;
+      ExcludeDCT = NBPtr->Dct;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tSendCtrlWord bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFPrefDramTrainMode:
+      EventInfo = MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT;
+      ExcludeDCT = NBPtr->Dct;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tPrefDramTrainMode bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFEnterSelfRef:
+      EventInfo = MEM_ERROR_ENTER_SELF_REF_TIME_OUT;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tEnterSelfRef bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFFreqChgInProg:
+      EventInfo = MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT;
+      ExcludeDCT = NBPtr->Dct;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tFreqChgInProg bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFExitSelfRef:
+      EventInfo = MEM_ERROR_EXIT_SELF_REF_TIME_OUT;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tExitSelfRef bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFSendMrsCmd:
+      EventInfo = MEM_ERROR_SEND_MRS_CMD_TIME_OUT;
+      ExcludeDCT = NBPtr->Dct;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tSendMrsCmd bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFSendZQCmd:
+      EventInfo = MEM_ERROR_SEND_ZQ_CMD_TIME_OUT;
+      ExcludeDCT = NBPtr->Dct;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tSendZQCmd bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFDctExtraAccessDone:
+      EventInfo = MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT;
+      ExcludeDCT = NBPtr->Dct;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tDctExtraAccessDone bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFMemClrBusy:
+      EventInfo = MEM_ERROR_MEM_CLR_BUSY_TIME_OUT;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClrBusy bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFMemCleared:
+      EventInfo = MEM_ERROR_MEM_CLEARED_TIME_OUT;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tMemCleared bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    case BFFlushWr:
+      EventInfo = MEM_ERROR_FLUSH_WR_TIME_OUT;
+      ExcludeDCT = NBPtr->Dct;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\tFlushWr bitfield times out.\n");
+      ASSERT (ErrorRecovery || IgnoreErr);
+      break;
+    default:
+      EventClass = 0;
+      EventInfo = 0;
+      IDS_ERROR_TRAP;
+    }
+
+    PutEventLog (EventClass, EventInfo, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &MemPtr->StdHeader);
+    SetMemError (EventClass, MCTPtr);
+    if (!MemPtr->ErrorHandling (MCTPtr, ExcludeDCT, ExcludeChipSelMask, &MemPtr->StdHeader)) {
+      ASSERT (FALSE);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *     This function changes memory Pstate context
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in]      MemPstate  - Target Memory Pstate
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNChangeMemPStateContextNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSTATE MemPstate
+  )
+{
+  UINT8 PSMasterChannel;
+  UINT8 Dct;
+
+  ASSERT ((MemPstate == 0) || (MemPstate == 1));
+  ASSERT (NBPtr->MemPstate == ((MemNGetBitFieldNb (NBPtr, BFMemPsSel) == 0) ? MEMORY_PSTATE0 : MEMORY_PSTATE1));
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nGo to Memory Pstate Conext %d\n", MemPstate);
+  Dct = NBPtr->Dct;
+  MemNSwitchDCTNb (NBPtr, 0);
+  // Figure out what is the master channel
+  PSMasterChannel = (UINT8) (MemNGetBitFieldNb (NBPtr, BFPhyPSMasterChannel) >> 8);
+
+  // Switch to the master channel to change PStateToAccess
+  // PStateToAccess is only effective on the master channel
+  MemNSwitchDCTNb (NBPtr, PSMasterChannel);
+  MemNSetBitFieldNb (NBPtr, BFMemPsSel, MemPstate);
+  MemNSetBitFieldNb (NBPtr, BFPStateToAccess, MemPstate << 8);
+
+  NBPtr->MemPstate = (MemPstate == 0) ? MEMORY_PSTATE0 : MEMORY_PSTATE1;
+  MemNSwitchDCTNb (NBPtr, Dct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function allocates buffer for NB register table
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Handle   - Handle for heap allocation for NBRegTable
+ *
+ *     @return      TRUE  - Successfully allocates buffer the first time
+ *     @return      FALSE - Buffer already allocated or fails to allocate
+ */
+
+BOOLEAN
+MemNAllocateNBRegTableNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       NB_REG_TAB_HANDLE  Handle
+  )
+{
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  LOCATE_HEAP_PTR LocHeap;
+
+  // If NBRegTable for this family exists, use it
+  LocHeap.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_NB_REG_TABLE, Handle, 0, 0);
+  if (HeapLocateBuffer (&LocHeap, &(NBPtr->MemPtr->StdHeader)) == AGESA_SUCCESS) {
+    NBPtr->NBRegTable = (TSEFO *) LocHeap.BufferPtr;
+    return FALSE;
+  }
+
+  // Allocate new buffer for NBRegTable if it has not been allocated
+  AllocHeapParams.RequestedBufferSize = sizeof (TSEFO) * BFEndOfList;
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_NB_REG_TABLE, Handle, 0, 0);
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &(NBPtr->MemPtr->StdHeader))) {
+    ASSERT(FALSE); // NB and Tech Block Heap allocate error
+    return FALSE;
+  }
+  NBPtr->NBRegTable = (TSEFO *)AllocHeapParams.BufferPtr;
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mntrain2.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mntrain2.c
new file mode 100644
index 0000000000..92d500dc25
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mntrain2.c
@@ -0,0 +1,132 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mntrain2.c
+ *
+ * Common Northbridge function for training flow for DDR2
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_MNTRAIN2_FILECODE
+/* features */
+#include "mftds.h"
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_TECH_FEAT_BLOCK memTechTrainingFeatDDR2;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates DQS training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+MemNDQSTiming2Nb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+
+  TechPtr = NBPtr->TechPtr;
+  if (TechPtr->NBPtr->MCTPtr->NodeMemSize) {
+    AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeDQSTraining, &NBPtr->MemPtr->StdHeader);
+    AgesaHookBeforeDQSTraining (NBPtr->MCTPtr->SocketId, TechPtr->NBPtr->MemPtr);
+    AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeDQSTraining, &NBPtr->MemPtr->StdHeader);
+    //Execute Technology specific training features
+    if (memTechTrainingFeatDDR2.NonOptimizedSWDQSRecEnTrainingPart1 (TechPtr)) {
+      if (memTechTrainingFeatDDR2.OptimizedSwDqsRecEnTrainingPart1 (TechPtr)) {
+        MemFInitTableDrive (NBPtr, MTAfterSwRxEnTrn);
+        if (memTechTrainingFeatDDR2.NonOptimizedSRdWrPosTraining (TechPtr)) {
+          if (memTechTrainingFeatDDR2.OptimizedSRdWrPosTraining (TechPtr)) {
+            MemFInitTableDrive (NBPtr, MTAfterDqsRwPosTrn);
+            if (memTechTrainingFeatDDR2.MaxRdLatencyTraining (TechPtr)) {
+              MemFInitTableDrive (NBPtr, MTAfterMaxRdLatTrn);
+            }
+          }
+        }
+      }
+    }
+    MemTMarkTrainFail (TechPtr);
+  }
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mntrain3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mntrain3.c
new file mode 100644
index 0000000000..d124619455
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/NB/mntrain3.c
@@ -0,0 +1,244 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mntrain3.c
+ *
+ * Common Northbridge function for training flow for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 59563 $ @e \$Date: 2011-09-26 12:06:49 -0600 (Mon, 26 Sep 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_NB_MNTRAIN3_FILECODE
+/* features */
+#include "mftds.h"
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemNHwWlPart2Nb (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR3[];
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates DQS training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+MemNDQSTiming3Nb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  UINT8 i;
+  BOOLEAN Retval;
+  TechPtr = NBPtr->TechPtr;
+  Retval = TRUE;
+  if (TechPtr->NBPtr->MCTPtr->NodeMemSize) {
+    //Execute Technology specific training features
+    i = 0;
+    while (memTrainSequenceDDR3[i].TrainingSequenceEnabled != 0) {
+      if (memTrainSequenceDDR3[i].TrainingSequenceEnabled (NBPtr)) {
+        NBPtr->TrainingSequenceIndex = i;
+        Retval = memTrainSequenceDDR3[i].TrainingSequence (NBPtr);
+        break;
+      }
+      i++;
+    }
+  }
+  return Retval;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates DQS training for Server NB
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+memNSequenceDDR3Nb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+  UINT8 i;
+  TechPtr = NBPtr->TechPtr;
+  i = NBPtr->TrainingSequenceIndex;
+  if (TechPtr->NBPtr->MCTPtr->NodeMemSize != 0) {
+    AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeDQSTraining, &NBPtr->MemPtr->StdHeader);
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nCalling out to Platform BIOS...\n");
+    if (AgesaHookBeforeDQSTraining (NBPtr->MCTPtr->SocketId, TechPtr->NBPtr->MemPtr) == AGESA_SUCCESS) {
+      // Right now we do not have anything to do if the callout is implemented
+    }
+    AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeDQSTraining, &NBPtr->MemPtr->StdHeader);
+    //Execute Technology specific training features
+    if (memTrainSequenceDDR3[i].MemTechFeatBlock->EnterHardwareTraining (TechPtr)) {
+      TechPtr->TechnologySpecificHook[LrdimmBuf2DramTrain] (TechPtr, NULL);
+      if (memTrainSequenceDDR3[i].MemTechFeatBlock->SwWLTraining (TechPtr)) {
+        MemFInitTableDrive (NBPtr, MTAfterSwWLTrn);
+        if (memTrainSequenceDDR3[i].MemTechFeatBlock->HwBasedWLTrainingPart1 (TechPtr)) {
+          MemFInitTableDrive (NBPtr, MTAfterHwWLTrnP1);
+          if (memTrainSequenceDDR3[i].MemTechFeatBlock->HwBasedDQSReceiverEnableTrainingPart1 (TechPtr)) {
+            MemFInitTableDrive (NBPtr, MTAfterHwRxEnTrnP1);
+            // If target speed is higher than start-up speed, do frequency change and second pass of WL
+            do {
+              if (MemNHwWlPart2Nb (TechPtr)) {
+                if (memTrainSequenceDDR3[i].MemTechFeatBlock->TrainExitHwTrn (TechPtr)) {
+                  IDS_OPTION_HOOK (IDS_PHY_DLL_STANDBY_CTRL, NBPtr, &(NBPtr->MemPtr->StdHeader));
+                  if (memTrainSequenceDDR3[i].MemTechFeatBlock->NonOptimizedSWDQSRecEnTrainingPart1 (TechPtr)) {
+                    if (memTrainSequenceDDR3[i].MemTechFeatBlock->OptimizedSwDqsRecEnTrainingPart1 (TechPtr)) {
+                      MemFInitTableDrive (NBPtr, MTAfterSwRxEnTrn);
+                      if (memTrainSequenceDDR3[i].MemTechFeatBlock->NonOptimizedSRdWrPosTraining (TechPtr)) {
+                        if (memTrainSequenceDDR3[i].MemTechFeatBlock->OptimizedSRdWrPosTraining (TechPtr)) {
+                          MemFInitTableDrive (NBPtr, MTAfterDqsRwPosTrn);
+                          if (!NBPtr->FamilySpecificHook[MemPstateStageChange] (NBPtr, NULL)) {
+                            continue;
+                          }
+                          if (NBPtr->Execute1dMaxRdLatTraining) {
+                            do {
+                              if (memTrainSequenceDDR3[i].MemTechFeatBlock->MaxRdLatencyTraining (TechPtr)) {
+                                MemFInitTableDrive (NBPtr, MTAfterMaxRdLatTrn);
+                              }
+                            } while (NBPtr->ChangeNbFrequency (NBPtr));
+						  } else {
+                            // If not running MRL training, set everything back for training
+							memTrainSequenceDDR3[i].MemTechFeatBlock->TrainExitHwTrn (TechPtr);
+                          }
+                        }
+                      }
+                    }
+                  }
+                }
+              }
+            } while (NBPtr->MemPstateStage == MEMORY_PSTATE_2ND_STAGE);
+          }
+        }
+      }
+    }
+    MemTMarkTrainFail (TechPtr);
+  }
+  return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function executes HW WL at multiple speeds
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @return       TRUE - No errors occurred
+ *                   FALSE - errors occurred
+ */
+
+BOOLEAN
+STATIC
+MemNHwWlPart2Nb (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  BOOLEAN retVal;
+  UINT8 i;
+  retVal = TRUE;
+  i = TechPtr->NBPtr->TrainingSequenceIndex;
+  while ((TechPtr->NBPtr->DCTPtr->Timings.TargetSpeed > TechPtr->NBPtr->DCTPtr->Timings.Speed) && (TechPtr->NBPtr->MemPstateStage != MEMORY_PSTATE_1ST_STAGE)) {
+    TechPtr->PrevSpeed = TechPtr->NBPtr->DCTPtr->Timings.Speed;
+    if (TechPtr->NBPtr->RampUpFrequency (TechPtr->NBPtr)) {
+      TechPtr->TechnologySpecificHook[LrdimmBuf2DramTrain] (TechPtr, NULL);
+      if (!memTrainSequenceDDR3[i].MemTechFeatBlock->HwBasedWLTrainingPart2 (TechPtr)) {
+        retVal = FALSE;
+        break;
+      }
+      MemFInitTableDrive (TechPtr->NBPtr, MTAfterHwWLTrnP2);
+      if (!memTrainSequenceDDR3[i].MemTechFeatBlock->HwBasedDQSReceiverEnableTrainingPart2 (TechPtr)) {
+        retVal = FALSE;
+        break;
+      }
+      MemFInitTableDrive (TechPtr->NBPtr, MTAfterHwRxEnTrnP2);
+    } else {
+      retVal = FALSE;
+      break;
+    }
+  }
+  return retVal;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/C32/mprc32_3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/C32/mprc32_3.c
new file mode 100644
index 0000000000..802a48e4fa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/C32/mprc32_3.c
@@ -0,0 +1,325 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mprc32_3.c
+ *
+ * Platform specific settings for C32 DDR3 R-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_C32_MPRC32_3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define AMD_FAMILY_10_C32    AMD_FAMILY_10_HY
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsRC32_3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemPGetPORFreqLimitRC32_3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*
+ * ODT Settings for 1 or 2 Dimms Per Channel
+ *
+ * Speeds Supported, # of Dimms, # of QRDimms, DramTerm, QR DramTerm, Dynamic DramTerm
+ */
+STATIC CONST DRAM_TERM_ENTRY C32RDdr3DramTerm2D[] = {
+  {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR667 + DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1},
+  {DDR667 + DDR800 + DDR1066 + DDR1333, ONE_DIMM, ONE_DIMM, 0, 1, 2},
+  {DDR1600, ONE_DIMM, ONE_DIMM, 0, 1, 1},
+  {DDR667 + DDR800, TWO_DIMM, ONE_DIMM, 5, 1, 2},
+  {DDR1066 + DDR1333 + DDR1600, TWO_DIMM, ONE_DIMM, 5, 1, 1},
+  {DDR667 + DDR800, TWO_DIMM, TWO_DIMM, 0, 1, 2},
+  {DDR1066 + DDR1333 + DDR1600, TWO_DIMM, TWO_DIMM, 0, 1, 1}
+};
+/*
+ * ODT Settings for 3 Dimms Per Channel
+ *
+ * Speeds Supported, # of Dimms, # of QRDimms, DramTerm, QR DramTerm, Dynamic DramTerm
+ */
+STATIC CONST DRAM_TERM_ENTRY C32RDdr3DramTerm3D[] = {
+  {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR667 + DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333 + DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600, THREE_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR667 + DDR800 + DDR1066 + DDR1333, ONE_DIMM, ONE_DIMM, 0, 1, 2},
+  {DDR667 + DDR800, TWO_DIMM, ONE_DIMM, 5, 1, 2},
+  {DDR1066 + DDR1333 + DDR1600, TWO_DIMM, ONE_DIMM, 5, 1, 1},
+  {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600, THREE_DIMM, ONE_DIMM, 3, 1, 2}
+};
+/*
+ * POR Max Frequency supported for specific Dimm configurations for 1 Dimm Per Channel
+ *
+ * Dimm Config, # of Dimms, Max Freq @ 1.5V, Max Freq @ 1.35V, Max Freq @ 1.25
+ */
+STATIC CONST POR_SPEED_LIMIT C32RDdr3PSPorFreqLimit1D[] = {
+  {SR_DIMM0 + DR_DIMM0, 1, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0},
+  {QR_DIMM0, 1, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0}
+};
+/*
+ * POR Max Frequency supported for specific Dimm configurations for 2 Dimms Per Channel
+ *
+ * Dimm Config, # of Dimms, Max Freq @ 1.5V, Max Freq @ 1.35V, Max Freq @ 1.25
+ */
+STATIC CONST POR_SPEED_LIMIT C32RDdr3PSPorFreqLimit2D[] = {
+  {SR_DIMM1 + DR_DIMM1, 1, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0},
+  {QR_DIMM1, 1, DDR1333_FREQUENCY, DDR1066_FREQUENCY, 0},
+  {SR_DIMM0 + SR_DIMM1, 2, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0},
+  {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, 2, DDR1066_FREQUENCY, DDR1066_FREQUENCY, 0},
+  {QR_DIMM0 + ANY_DIMM1, 2, DDR800_FREQUENCY, DDR667_FREQUENCY, 0},
+  {ANY_DIMM0 + QR_DIMM1, 2, DDR800_FREQUENCY, DDR667_FREQUENCY, 0}
+};
+/*
+ * POR Max Frequency supported for specific Dimm configurations for 3 Dimms Per Channel
+ *
+ * Dimm Config, # of Dimms, Max Freq @ 1.5V, Max Freq @ 1.35V, Max Freq @ 1.25
+ */
+STATIC CONST POR_SPEED_LIMIT C32RDdr3PSPorFreqLimit3D[] = {
+  {SR_DIMM2 + DR_DIMM2, 1, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0},
+  {SR_DIMM0 + SR_DIMM2, 2, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0},
+  {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, 2, DDR1066_FREQUENCY, DDR1066_FREQUENCY, 0},
+  {QR_DIMM1, 1, DDR800_FREQUENCY, DDR800_FREQUENCY, 0},
+  {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, 2, DDR800_FREQUENCY, DDR667_FREQUENCY, 0},
+  {SR_DIMM0 + SR_DIMM1 + SR_DIMM2, 3, DDR1066_FREQUENCY, DDR800_FREQUENCY, 0},
+  {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, 3, DDR800_FREQUENCY, DDR800_FREQUENCY, 0},
+  {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, 3, DDR667_FREQUENCY, DDR667_FREQUENCY, 0}
+
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor platform specific settings for R DIMM-DDR3 C32 DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsRC32_3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_C32) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->RegDimmPresent != ChannelPtr->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+  PsPtr->MemPDoPs = MemPDoPsRC32_3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitRC32_3;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for R-DDR3 C32 DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsRC32_3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST DRAM_TERM_ENTRY *DramTermPtr;
+  UINT8 MaxDimmsPerChannel;
+  UINT8 *DimmsPerChPtr;
+  UINT8 DramTermSize;
+
+  DramTermSize = 0;
+  DramTermPtr = NULL;
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmsPerChannel = *DimmsPerChPtr;
+  } else {
+    MaxDimmsPerChannel = 2;
+  }
+
+  if ((MaxDimmsPerChannel == 1) || (MaxDimmsPerChannel == 2)) {
+    DramTermSize = GET_SIZE_OF (C32RDdr3DramTerm2D);
+    DramTermPtr = C32RDdr3DramTerm2D;
+  } else if (MaxDimmsPerChannel == 3) {
+    DramTermSize = GET_SIZE_OF (C32RDdr3DramTerm3D);
+    DramTermPtr = C32RDdr3DramTerm3D;
+  } else {
+    IDS_ERROR_TRAP;
+  }
+
+  if (!MemPGetDramTerm (NBPtr, DramTermSize, DramTermPtr)) {
+    return FALSE;
+  }
+  //
+  // Special Cases for certain configs not covered by the table
+  //
+  // SR-SR-SR 1.5v @1066 (Currently only 3DPCH config at 1066)
+  if ((MaxDimmsPerChannel == 3) && (NBPtr->ChannelPtr->Dimms == 3) &&
+      (NBPtr->DCTPtr->Timings.Speed == DDR1066_FREQUENCY)) {
+    NBPtr->PsPtr->DramTerm = 5; //30 Ohms
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function gets the POR speed limit for R-DDR3 C32 DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *
+ */
+VOID
+STATIC
+MemPGetPORFreqLimitRC32_3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 *DimmsPerChPtr;
+  UINT8 MaxDimmPerCH;
+  UINT8 FreqLimitSize;
+  UINT16 SpeedLimit;
+  CONST POR_SPEED_LIMIT *FreqLimitPtr;
+  DCT_STRUCT *DCTPtr;
+
+  DCTPtr = NBPtr->DCTPtr;
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  if (MaxDimmPerCH == 4) {
+    DCTPtr->Timings.DimmExclude |= DCTPtr->Timings.DctDimmValid;
+    PutEventLog (AGESA_CRITICAL, MEM_ERROR_UNSUPPORTED_DIMM_CONFIG, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_CRITICAL, NBPtr->MCTPtr);
+    // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+    NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+    return;
+  } else if (MaxDimmPerCH == 3) {
+    FreqLimitPtr = C32RDdr3PSPorFreqLimit3D;
+    FreqLimitSize = GET_SIZE_OF (C32RDdr3PSPorFreqLimit3D);
+  } else if (MaxDimmPerCH == 2) {
+    FreqLimitPtr = C32RDdr3PSPorFreqLimit2D;
+    FreqLimitSize = GET_SIZE_OF (C32RDdr3PSPorFreqLimit2D);
+  } else {
+    FreqLimitPtr = C32RDdr3PSPorFreqLimit1D;
+    FreqLimitSize = GET_SIZE_OF (C32RDdr3PSPorFreqLimit1D);
+  }
+
+  SpeedLimit = MemPGetPorFreqLimit (NBPtr, FreqLimitSize, FreqLimitPtr);
+
+  if (SpeedLimit != 0) {
+    if (DCTPtr->Timings.TargetSpeed > SpeedLimit) {
+      DCTPtr->Timings.TargetSpeed = SpeedLimit;
+    }
+  } else {
+    DCTPtr->Timings.DimmExclude |= DCTPtr->Timings.DctDimmValid;
+    PutEventLog (AGESA_CRITICAL, MEM_ERROR_UNSUPPORTED_DIMM_CONFIG, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_CRITICAL, NBPtr->MCTPtr);
+    // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+    NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+  }
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/C32/mpuc32_3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/C32/mpuc32_3.c
new file mode 100644
index 0000000000..2dbc362bfc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/C32/mpuc32_3.c
@@ -0,0 +1,204 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpuc32_3.c
+ *
+ * Platform specific settings for C32 DDR3 U-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_C32_MPUC32_3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define AMD_FAMILY_10_C32    AMD_FAMILY_10_HY
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsUC32_3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemPGetPORFreqLimitUC32_3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY C32UDdr3DramTerm[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1}
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor for the platform specific settings for U-DDR3 C32 DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsUC32_3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_C32) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if ((ChannelPtr->RegDimmPresent != 0) || (ChannelPtr->SODimmPresent != 0)) {
+    return AGESA_UNSUPPORTED;
+  }
+  PsPtr->MemPDoPs = MemPDoPsUC32_3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitUC32_3;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for U-DDR3 C32 DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsUC32_3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (!MemPGetDramTerm (NBPtr, GET_SIZE_OF (C32UDdr3DramTerm), C32UDdr3DramTerm)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function gets the POR speed limit for SO-DDR3 C32
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *
+ */
+VOID
+STATIC
+MemPGetPORFreqLimitUC32_3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT16 MaxSpeed;
+  //
+  // For 2/2 or 2/3 DPCH where one is a DR, Max Speed is 1066
+  //
+  if ( (NBPtr->ChannelPtr->Dimms >= 2) && ((NBPtr->ChannelPtr->DimmDrPresent & 0x07) != 0) ) {
+    MaxSpeed = DDR1066_FREQUENCY;
+  } else {
+    //
+    // Highest POR supported speed for Unbuffered dimm is 1333
+    //
+    MaxSpeed = DDR1333_FREQUENCY;
+  }
+  if (NBPtr->DCTPtr->Timings.TargetSpeed > MaxSpeed) {
+    NBPtr->DCTPtr->Timings.TargetSpeed = MaxSpeed;
+  } else if (NBPtr->DCTPtr->Timings.TargetSpeed == DDR667_FREQUENCY) {
+    // Unbuffered DDR3 at 333MHz is not supported
+    NBPtr->DCTPtr->Timings.DimmExclude |= NBPtr->DCTPtr->Timings.DctDimmValid;
+    PutEventLog (AGESA_ERROR, MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+    // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+    NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+  }
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DA/mpsda2.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DA/mpsda2.c
new file mode 100644
index 0000000000..a3d90b8e34
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DA/mpsda2.c
@@ -0,0 +1,160 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpsda2.c
+ *
+ * Platform specific settings for DA DDR2 SO-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support S1g3 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_DA_MPSDA2_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsSDA2 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY DaSDdr2DramTerm[] = {
+  {DDR533 + DDR667 + DDR800, ONE_DIMM, ANY_NUM, 2, 0, 0},
+  {DDR533 + DDR667, TWO_DIMM, ANY_NUM, 1, 0, 0},
+  {DDR800, TWO_DIMM, ANY_NUM, 3, 0, 0}
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor the platform specific settings for SO-DIMM DA DDR2
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsSDA2 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR2_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->SODimmPresent != ChannelPtr->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  PsPtr->MemPDoPs = MemPDoPsSDA2;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitDef;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for SO-DIMM DA DDR2
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsSDA2 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (!MemPGetDramTerm (NBPtr, GET_SIZE_OF (DaSDdr2DramTerm), DaSDdr2DramTerm)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DA/mpsda3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DA/mpsda3.c
new file mode 100644
index 0000000000..96cc3b9df0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DA/mpsda3.c
@@ -0,0 +1,255 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpsda3.c
+ *
+ * Platform specific settings for DA DDR3 SO-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_DA_MPSDA3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsSDA3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemPGetPORFreqLimitSDA3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY DaSDdr3DramTerm1D[] = {
+  {DDR800, ONE_DIMM, NO_DIMM, 2, 0, 0},
+  {DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0}
+};
+
+STATIC CONST DRAM_TERM_ENTRY DaSDdr3DramTerm2D[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1066 + DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1}
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor the platform specific settings for SO-DIMM DA DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsSDA3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->SODimmPresent != ChannelPtr->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  PsPtr->MemPDoPs = MemPDoPsSDA3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitSDA3;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for SO-DIMM DA DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsSDA3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST DRAM_TERM_ENTRY *DramTermPtr;
+  UINT8 MaxDimmsPerChannel;
+  UINT8 *DimmsPerChPtr;
+  UINT8 DramTermSize;
+
+  DramTermSize = 0;
+  DramTermPtr = NULL;
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmsPerChannel = *DimmsPerChPtr;
+  } else {
+    MaxDimmsPerChannel = 2;
+  }
+
+  if (MaxDimmsPerChannel == 1) {
+    DramTermSize = GET_SIZE_OF (DaSDdr3DramTerm1D);
+    DramTermPtr = DaSDdr3DramTerm1D;
+  } else if (MaxDimmsPerChannel == 2) {
+    DramTermSize = GET_SIZE_OF (DaSDdr3DramTerm2D);
+    DramTermPtr = DaSDdr3DramTerm2D;
+  } else {
+    IDS_ERROR_TRAP;
+  }
+
+  if (!MemPGetDramTerm (NBPtr, DramTermSize, DramTermPtr)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function gets the POR speed limit for SO-DDR3 DA
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *
+ */
+VOID
+STATIC
+MemPGetPORFreqLimitSDA3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 *DimmsPerChPtr;
+  UINT8 MaxDimmPerCH;
+  UINT16 SpeedLimit;
+
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  if (MaxDimmPerCH == 1) {
+    if (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) {
+      //
+      // Highest POR supported speed for SODimm is 1333
+      //
+      SpeedLimit = DDR1333_FREQUENCY;
+    } else {
+      //
+      // Max LV DDR3 Speed is 1066 for this silicon
+      //
+      SpeedLimit = DDR1066_FREQUENCY;
+    }
+  } else {
+    //
+    // Highest supported speed in 2DPC configuration is 1066
+    //
+    SpeedLimit = DDR1066_FREQUENCY;
+    //
+    // VOLT1_35 won't be supported while two DIMMs are populated in a channel
+    //
+    if ((NBPtr->RefPtr->DDR3Voltage == VOLT1_35) &&
+       (NBPtr->ChannelPtr->Dimms == 2)) {
+      NBPtr->RefPtr->DDR3Voltage = VOLT1_5;
+      PutEventLog (AGESA_WARNING, MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_WARNING, NBPtr->MCTPtr);
+    }
+  }
+
+  if (NBPtr->DCTPtr->Timings.TargetSpeed > SpeedLimit) {
+    NBPtr->DCTPtr->Timings.TargetSpeed = SpeedLimit;
+  }
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DA/mpuda3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DA/mpuda3.c
new file mode 100644
index 0000000000..42921421d9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DA/mpuda3.c
@@ -0,0 +1,208 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpuda3.c
+ *
+ * Platform specific settings for DA DDR3 U-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_DA_MPUDA3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsUDA3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemPGetPORFreqLimitUDA3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY DrUDdr3DramTerm[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1}
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor for the platform specific settings for U-DDR3 DA DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsUDA3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if ((ChannelPtr->RegDimmPresent != 0) || (ChannelPtr->SODimmPresent != 0)) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  PsPtr->MemPDoPs = MemPDoPsUDA3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitUDA3;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for U-DDR3 DA DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsUDA3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (!MemPGetDramTerm (NBPtr, GET_SIZE_OF (DrUDdr3DramTerm), DrUDdr3DramTerm)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function gets the POR speed limit for U-DDR3 DA
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *
+ */
+VOID
+STATIC
+MemPGetPORFreqLimitUDA3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT16 SpeedLimit;
+
+  if (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) {
+    //
+    // Highest POR supported speed for Unbuffered dimm is 1333
+    //
+    SpeedLimit = DDR1333_FREQUENCY;
+  } else {
+    //
+    // Max LV DDR3 Speed is 1066 for this silicon
+    //
+    SpeedLimit = DDR1066_FREQUENCY;
+  }
+
+  if (NBPtr->DCTPtr->Timings.TargetSpeed > SpeedLimit) {
+    NBPtr->DCTPtr->Timings.TargetSpeed = SpeedLimit;
+  } else if (NBPtr->DCTPtr->Timings.TargetSpeed == DDR667_FREQUENCY) {
+    // Unbuffered DDR3 at 333MHz is not supported
+    NBPtr->DCTPtr->Timings.DimmExclude |= NBPtr->DCTPtr->Timings.DctDimmValid;
+    PutEventLog (AGESA_ERROR, MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+    // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+    NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+  }
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mprdr2.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mprdr2.c
new file mode 100644
index 0000000000..7b2d67f038
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mprdr2.c
@@ -0,0 +1,165 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mprdr2.c
+ *
+ * Platform specific settings for DR DDR2 R-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_DR_MPRDR2_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsRDr2 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY DrUDdr2DramTerm[] = {
+  {DDR400 + DDR533 + DDR667, ONE_DIMM, ANY_NUM, 1, 0, 0},
+  {DDR400 + DDR533, TWO_DIMM + THREE_DIMM + FOUR_DIMM, ANY_NUM, 1, 0, 0},
+  {DDR667, TWO_DIMM + THREE_DIMM, ANY_NUM, 1, 0, 0},
+  {DDR667, FOUR_DIMM, ANY_NUM, 3, 0, 0},
+  {DDR800, ONE_DIMM, ANY_NUM, 1, 0, 0},
+  {DDR800, TWO_DIMM + THREE_DIMM + FOUR_DIMM, ANY_NUM, 3, 0, 0},
+  {DDR1066, ONE_DIMM, ANY_NUM, 1, 0, 0}
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor platform specific settings for R DIMM-DDR2 DR DDR2
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsRDr2 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR2_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->RegDimmPresent != ChannelPtr->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+  PsPtr->MemPDoPs = MemPDoPsRDr2;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitDef;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for R-DDR2 DR DDR2
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsRDr2 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (!MemPGetDramTerm (NBPtr, GET_SIZE_OF (DrUDdr2DramTerm), DrUDdr2DramTerm)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mprdr3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mprdr3.c
new file mode 100644
index 0000000000..0ae2a7ce54
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mprdr3.c
@@ -0,0 +1,204 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mprdr3.c
+ *
+ * Platform specific settings for DR DDR3 R-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_DR_MPRDR3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsRDr3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY DrRDdr3DramTerm2D[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1},
+  {DDR800 + DDR1066 + DDR1333, ONE_DIMM, ONE_DIMM, 0, 1, 2},
+  {DDR1600, ONE_DIMM, ONE_DIMM, 0, 1, 1},
+  {DDR800, TWO_DIMM, ONE_DIMM, 5, 1, 2},
+  {DDR1066 + DDR1333 + DDR1600, TWO_DIMM, ONE_DIMM, 5, 1, 1},
+  {DDR800, TWO_DIMM, TWO_DIMM, 0, 1, 2},
+  {DDR1066 + DDR1333 + DDR1600, TWO_DIMM, TWO_DIMM, 0, 1, 1}
+};
+
+STATIC CONST DRAM_TERM_ENTRY DrRDdr3DramTerm3D[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333 + DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, THREE_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR800 + DDR1066 + DDR1333, ONE_DIMM, ONE_DIMM, 0, 1, 2},
+  {DDR800, TWO_DIMM, ONE_DIMM, 5, 1, 2},
+  {DDR1066 + DDR1333 + DDR1600, TWO_DIMM, ONE_DIMM, 5, 1, 1},
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, THREE_DIMM, ONE_DIMM, 3, 1, 2}
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor platform specific settings for R DIMM-DDR3 DR DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsRDr3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->RegDimmPresent != ChannelPtr->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+  PsPtr->MemPDoPs = MemPDoPsRDr3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitDef;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for R-DDR3 DR DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsRDr3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST DRAM_TERM_ENTRY *DramTermPtr;
+  UINT8 MaxDimmsPerChannel;
+  UINT8 *DimmsPerChPtr;
+  UINT8 DramTermSize;
+
+  DramTermSize = 0;
+  DramTermPtr = NULL;
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmsPerChannel = *DimmsPerChPtr;
+  } else {
+    MaxDimmsPerChannel = 2;
+  }
+
+  if (MaxDimmsPerChannel == 2) {
+    DramTermSize = GET_SIZE_OF (DrRDdr3DramTerm2D);
+    DramTermPtr = DrRDdr3DramTerm2D;
+  } else if (MaxDimmsPerChannel == 3) {
+    DramTermSize = GET_SIZE_OF (DrRDdr3DramTerm3D);
+    DramTermPtr = DrRDdr3DramTerm3D;
+  } else {
+    IDS_ERROR_TRAP;
+  }
+
+  if (!MemPGetDramTerm (NBPtr, DramTermSize, DramTermPtr)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mpsdr3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mpsdr3.c
new file mode 100644
index 0000000000..215072cddf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mpsdr3.c
@@ -0,0 +1,191 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpsdr3.c
+ *
+ * Platform specific settings for DR DDR3 SO-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_DR_MPSDR3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsSDr3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY DrSDdr3DramTerm1D[] = {
+  {DDR800, ONE_DIMM, NO_DIMM, 2, 0, 0},
+  {DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0}
+};
+
+STATIC CONST DRAM_TERM_ENTRY DrSDdr3DramTerm2D[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1066 + DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1}
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor the platform specific settings for SO SIMM-DDR3 DR DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsSDr3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->SODimmPresent != ChannelPtr->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+  PsPtr->MemPDoPs = MemPDoPsSDr3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitDef;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for S-DDR3 DR DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsSDr3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST DRAM_TERM_ENTRY *DramTermPtr;
+  UINT8 MaxDimmsPerChannel;
+  UINT8 *DimmsPerChPtr;
+  UINT8 DramTermSize;
+
+  DramTermSize = 0;
+  DramTermPtr = NULL;
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmsPerChannel = *DimmsPerChPtr;
+  } else {
+    MaxDimmsPerChannel = 2;
+  }
+
+  if (MaxDimmsPerChannel == 1) {
+    DramTermSize = GET_SIZE_OF (DrSDdr3DramTerm1D);
+    DramTermPtr = DrSDdr3DramTerm1D;
+  } else if (MaxDimmsPerChannel == 2) {
+    DramTermSize = GET_SIZE_OF (DrSDdr3DramTerm2D);
+    DramTermPtr = DrSDdr3DramTerm2D;
+  } else {
+    IDS_ERROR_TRAP;
+  }
+
+  if (!MemPGetDramTerm (NBPtr, DramTermSize, DramTermPtr)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mpudr2.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mpudr2.c
new file mode 100644
index 0000000000..9359e5cd0c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mpudr2.c
@@ -0,0 +1,165 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpudr2.c
+ *
+ * Platform specific settings for DR DDR2 U-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_DR_MPUDR2_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsUDr2 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY DrUDdr2DramTerm[] = {
+  {DDR400 + DDR533 + DDR667, ONE_DIMM, ANY_NUM, 1, 0, 0},
+  {DDR400 + DDR533, TWO_DIMM + THREE_DIMM + FOUR_DIMM, ANY_NUM, 1, 0, 0},
+  {DDR667, TWO_DIMM + THREE_DIMM, ANY_NUM, 1, 0, 0},
+  {DDR667, FOUR_DIMM, ANY_NUM, 3, 0, 0},
+  {DDR800, ONE_DIMM, ANY_NUM, 1, 0, 0},
+  {DDR800, TWO_DIMM + THREE_DIMM + FOUR_DIMM, ANY_NUM, 3, 0, 0},
+  {DDR1066, ONE_DIMM, ANY_NUM, 1, 0, 0}
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor platform specific settings for U DIMM-DDR2 DR DDR2
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsUDr2 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR2_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if ((ChannelPtr->RegDimmPresent != 0) || (ChannelPtr->SODimmPresent != 0)) {
+    return AGESA_UNSUPPORTED;
+  }
+  PsPtr->MemPDoPs = MemPDoPsUDr2;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitDef;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for U-DDR2 DR DDR2
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsUDr2 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (!MemPGetDramTerm (NBPtr, GET_SIZE_OF (DrUDdr2DramTerm), DrUDdr2DramTerm)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mpudr3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mpudr3.c
new file mode 100644
index 0000000000..84007fea98
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/DR/mpudr3.c
@@ -0,0 +1,160 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpudr3.c
+ *
+ * Platform specific settings for DR DDR3 U-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_DR_MPUDR3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsUDr3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY DrUDdr3DramTerm[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1}
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor for the platform specific settings for U-DDR3 DR DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsUDr3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if ((ChannelPtr->RegDimmPresent != 0) || (ChannelPtr->SODimmPresent != 0)) {
+    return AGESA_UNSUPPORTED;
+  }
+  PsPtr->MemPDoPs = MemPDoPsUDr3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitDef;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for U-DDR3 DR DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsUDr3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (!MemPGetDramTerm (NBPtr, GET_SIZE_OF (DrUDdr3DramTerm), DrUDdr3DramTerm)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/HY/mprhy3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/HY/mprhy3.c
new file mode 100644
index 0000000000..24d4384e05
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/HY/mprhy3.c
@@ -0,0 +1,324 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mprhy3.c
+ *
+ * Platform specific settings for HY DDR3 R-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "GeneralServices.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_HY_MPRHY3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsRHy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemPGetPORFreqLimitRHy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*
+ * ODT Settings for 1 Dimm or 2 Dimms Per Channel
+ *
+ * Speeds Supported, # of Dimms, # of QRDimms, DramTerm, QR DramTerm, Dynamic DramTerm
+ */
+STATIC CONST DRAM_TERM_ENTRY HyRDdr3DramTerm2D[] = {
+  {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR667 + DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1},
+  {DDR667 + DDR800 + DDR1066 + DDR1333, ONE_DIMM, ONE_DIMM, 0, 1, 2},
+  {DDR1600, ONE_DIMM, ONE_DIMM, 0, 1, 1},
+  {DDR667 + DDR800, TWO_DIMM, ONE_DIMM, 5, 1, 2},
+  {DDR1066 + DDR1333 + DDR1600, TWO_DIMM, ONE_DIMM, 5, 1, 1},
+  {DDR667 + DDR800, TWO_DIMM, TWO_DIMM, 0, 1, 2},
+  {DDR1066 + DDR1333 + DDR1600, TWO_DIMM, TWO_DIMM, 0, 1, 1}
+};
+/*
+ * ODT Settings for 3 Dimms Per Channel
+ *
+ * Speeds Supported, # of Dimms, # of QRDimms, DramTerm, QR DramTerm, Dynamic DramTerm
+ */
+STATIC CONST DRAM_TERM_ENTRY HyRDdr3DramTerm3D[] = {
+  {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR667 + DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333 + DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600, THREE_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR667 + DDR800 + DDR1066 + DDR1333, ONE_DIMM, ONE_DIMM, 0, 1, 2},
+  {DDR667 + DDR800, TWO_DIMM, ONE_DIMM, 5, 1, 2},
+  {DDR1066 + DDR1333 + DDR1600, TWO_DIMM, ONE_DIMM, 5, 1, 1},
+  {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600, THREE_DIMM, ONE_DIMM, 3, 1, 2}
+};
+/*
+ * POR Max Frequency supported for specific Dimm configurations for 1 Dimm Per Channel
+ *
+ * Dimm Config, # of Dimms, Max Freq @ 1.5V, Max Freq @ 1.35V, Max Freq @ 1.25
+ */
+STATIC CONST POR_SPEED_LIMIT HyRDdr3PSPorFreqLimit1D[] = {
+  {SR_DIMM0 + DR_DIMM0, 1, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0},
+  {QR_DIMM0, 1, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0}
+};
+/*
+ * POR Max Frequency supported for specific Dimm configurations for 2 Dimms Per Channel
+ *
+ * Dimm Config, # of Dimms, Max Freq @ 1.5V, Max Freq @ 1.35V, Max Freq @ 1.25
+ */
+STATIC CONST POR_SPEED_LIMIT HyRDdr3PSPorFreqLimit2D[] = {
+  {SR_DIMM1 + DR_DIMM1, 1, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0},
+  {QR_DIMM1, 1, DDR1333_FREQUENCY, DDR1066_FREQUENCY, 0},
+  {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, 2, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0},
+  {QR_DIMM0 + ANY_DIMM1, 2, DDR1066_FREQUENCY, DDR800_FREQUENCY, 0},
+  {ANY_DIMM0 + QR_DIMM1, 2, DDR1066_FREQUENCY, DDR800_FREQUENCY, 0}
+};
+/*
+ * POR Max Frequency supported for specific Dimm configurations for 3 Dimms Per Channel
+ *
+ * Dimm Config, # of Dimms, Max Freq @ 1.5V, Max Freq @ 1.35V, Max Freq @ 1.25
+ */
+STATIC CONST POR_SPEED_LIMIT HyRDdr3PSPorFreqLimit3D[] = {
+  {SR_DIMM2 + DR_DIMM2, 1, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0},
+  {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, 2, DDR1333_FREQUENCY, DDR1333_FREQUENCY, 0},
+  {QR_DIMM1, 1, DDR1066_FREQUENCY, DDR1066_FREQUENCY, 0},
+  {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, 2, DDR800_FREQUENCY, DDR800_FREQUENCY, 0},
+  {SR_DIMM0 + SR_DIMM1 + SR_DIMM2, 3, DDR1066_FREQUENCY, DDR1066_FREQUENCY, 0},
+  {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, 3, DDR1066_FREQUENCY, DDR800_FREQUENCY, 0},
+  {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, 3, DDR800_FREQUENCY, DDR667_FREQUENCY, 0}
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor platform specific settings for R DIMM-DDR3 HY DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsRHy3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_HY) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->RegDimmPresent != ChannelPtr->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+  PsPtr->MemPDoPs = MemPDoPsRHy3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitRHy3;
+
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for R-DDR3 HY DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsRHy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST DRAM_TERM_ENTRY *DramTermPtr;
+  UINT8 MaxDimmsPerChannel;
+  UINT8 *DimmsPerChPtr;
+  UINT8 DramTermSize;
+
+  DramTermSize = 0;
+  DramTermPtr = NULL;
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmsPerChannel = *DimmsPerChPtr;
+  } else {
+    MaxDimmsPerChannel = 2;
+  }
+
+  if ((MaxDimmsPerChannel == 1) || (MaxDimmsPerChannel == 2)) {
+    DramTermSize = GET_SIZE_OF (HyRDdr3DramTerm2D);
+    DramTermPtr = HyRDdr3DramTerm2D;
+  } else if (MaxDimmsPerChannel == 3) {
+    DramTermSize = GET_SIZE_OF (HyRDdr3DramTerm3D);
+    DramTermPtr = HyRDdr3DramTerm3D;
+  } else {
+    IDS_ERROR_TRAP;
+  }
+
+  if (!MemPGetDramTerm (NBPtr, DramTermSize, DramTermPtr)) {
+    return FALSE;
+  }
+  //
+  // Special Cases for certain configs not covered by the table
+  //
+  // 3DPCH Fully populated.
+  if ((MaxDimmsPerChannel == 3) && (NBPtr->ChannelPtr->Dimms == 3)) {
+    NBPtr->PsPtr->DramTerm = 5; //30 Ohms
+    NBPtr->PsPtr->QR_DramTerm = 1; // 60 Ohms
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function gets the POR speed limit for R-DDR3 HY
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *
+ */
+VOID
+STATIC
+MemPGetPORFreqLimitRHy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 *DimmsPerChPtr;
+  UINT8 MaxDimmPerCH;
+  UINT8 FreqLimitSize;
+  UINT16 SpeedLimit;
+  CONST POR_SPEED_LIMIT *FreqLimitPtr;
+  DCT_STRUCT *DCTPtr;
+
+  DCTPtr = NBPtr->DCTPtr;
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  if (MaxDimmPerCH == 4) {
+    DCTPtr->Timings.DimmExclude |= DCTPtr->Timings.DctDimmValid;
+    PutEventLog (AGESA_CRITICAL, MEM_ERROR_UNSUPPORTED_DIMM_CONFIG, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_CRITICAL, NBPtr->MCTPtr);
+    // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+    NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+    return;
+  } else if (MaxDimmPerCH == 3) {
+    FreqLimitPtr = HyRDdr3PSPorFreqLimit3D;
+    FreqLimitSize = GET_SIZE_OF (HyRDdr3PSPorFreqLimit3D);
+  } else if (MaxDimmPerCH == 2) {
+    FreqLimitPtr = HyRDdr3PSPorFreqLimit2D;
+    FreqLimitSize = GET_SIZE_OF (HyRDdr3PSPorFreqLimit2D);
+  } else {
+    FreqLimitPtr = HyRDdr3PSPorFreqLimit1D;
+    FreqLimitSize = GET_SIZE_OF (HyRDdr3PSPorFreqLimit1D);
+  }
+
+  SpeedLimit = MemPGetPorFreqLimit (NBPtr, FreqLimitSize, FreqLimitPtr);
+
+  if (SpeedLimit != 0) {
+    if (DCTPtr->Timings.TargetSpeed > SpeedLimit) {
+      DCTPtr->Timings.TargetSpeed = SpeedLimit;
+    }
+  } else {
+    DCTPtr->Timings.DimmExclude |= DCTPtr->Timings.DctDimmValid;
+    PutEventLog (AGESA_CRITICAL, MEM_ERROR_UNSUPPORTED_DIMM_CONFIG, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_CRITICAL, NBPtr->MCTPtr);
+    // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+    NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+  }
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/HY/mpshy3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/HY/mpshy3.c
new file mode 100644
index 0000000000..10595418eb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/HY/mpshy3.c
@@ -0,0 +1,220 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpshy3.c
+ *
+ * Platform specific settings for HY DDR3 SO-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_HY_MPSHY3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsSHy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemPGetPORFreqLimitSHy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY HySDdr3DramTerm1D[] = {
+  {DDR800, ONE_DIMM, NO_DIMM, 2, 0, 0},
+  {DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0}
+};
+
+STATIC CONST DRAM_TERM_ENTRY HySDdr3DramTerm2D[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1066 + DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1}
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor the platform specific settings for SO SIMM-DDR3 HY DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsSHy3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_HY) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->SODimmPresent != ChannelPtr->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+  PsPtr->MemPDoPs = MemPDoPsSHy3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitSHy3;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for S-DDR3 HY DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsSHy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST DRAM_TERM_ENTRY *DramTermPtr;
+  UINT8 MaxDimmsPerChannel;
+  UINT8 *DimmsPerChPtr;
+  UINT8 DramTermSize;
+
+  DramTermSize = 0;
+  DramTermPtr = NULL;
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmsPerChannel = *DimmsPerChPtr;
+  } else {
+    MaxDimmsPerChannel = 2;
+  }
+
+  if (MaxDimmsPerChannel == 1) {
+    DramTermSize = GET_SIZE_OF (HySDdr3DramTerm1D);
+    DramTermPtr = HySDdr3DramTerm1D;
+  } else if (MaxDimmsPerChannel == 2) {
+    DramTermSize = GET_SIZE_OF (HySDdr3DramTerm2D);
+    DramTermPtr = HySDdr3DramTerm2D;
+  } else {
+    IDS_ERROR_TRAP;
+  }
+
+  if (!MemPGetDramTerm (NBPtr, DramTermSize, DramTermPtr)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function gets the POR speed limit for SO-DDR3 HY
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *
+ */
+VOID
+STATIC
+MemPGetPORFreqLimitSHy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT16  MaxSpeed;
+  //
+  // Highest POR supported speed for SODimm is 1333
+  //
+  MaxSpeed = DDR1333_FREQUENCY;
+  if (NBPtr->DCTPtr->Timings.TargetSpeed > MaxSpeed) {
+    NBPtr->DCTPtr->Timings.TargetSpeed = MaxSpeed;
+  }
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/HY/mpuhy3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/HY/mpuhy3.c
new file mode 100644
index 0000000000..1aa93587d3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/HY/mpuhy3.c
@@ -0,0 +1,198 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpuhy3.c
+ *
+ * Platform specific settings for HY DDR3 U-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_HY_MPUHY3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsUhy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemPGetPORFreqLimitUHy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY HyUDdr3DramTerm[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1}
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor for the platform specific settings for U-DDR3 HY DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsUHy3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_HY) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if ((ChannelPtr->RegDimmPresent != 0) || (ChannelPtr->SODimmPresent != 0)) {
+    return AGESA_UNSUPPORTED;
+  }
+  PsPtr->MemPDoPs = MemPDoPsUhy3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitUHy3;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for U-DDR3 HY DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsUhy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (!MemPGetDramTerm (NBPtr, GET_SIZE_OF (HyUDdr3DramTerm), HyUDdr3DramTerm)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function gets the POR speed limit for U-DDR3 HY
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *
+ */
+VOID
+STATIC
+MemPGetPORFreqLimitUHy3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT16  MaxSpeed;
+  //
+  // Highest POR supported speed for Unbuffered dimm is 1333
+  //
+  MaxSpeed = DDR1333_FREQUENCY;
+  if (NBPtr->DCTPtr->Timings.TargetSpeed > MaxSpeed) {
+    NBPtr->DCTPtr->Timings.TargetSpeed = MaxSpeed;
+  } else if (NBPtr->DCTPtr->Timings.TargetSpeed == DDR667_FREQUENCY) {
+    // Unbuffered DDR3 at 333MHz is not supported
+    NBPtr->DCTPtr->Timings.DimmExclude |= NBPtr->DCTPtr->Timings.DctDimmValid;
+    PutEventLog (AGESA_ERROR, MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+    // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+    NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+  }
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/AM3/mpSorA3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/AM3/mpSorA3.c
new file mode 100644
index 0000000000..8f522b942b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/AM3/mpSorA3.c
@@ -0,0 +1,223 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpSorA3.c
+ *
+ * Platform specific settings for OR AM3 DDR3 SO-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/OR/AM3)
+ * @e \$Revision: 50871 $ @e \$Date: 2011-04-14 15:39:51 -0600 (Thu, 14 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_OR_AM3_MPSORA3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+// Slow mode, Address timing and Output drive compensation
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   SlowMode,   AddTmgCtl,   ODC
+//
+STATIC CONST PSCFG_SAO_ENTRY OrAM3SODdr3SAO[] = {
+  {1, DDR667 + DDR800, V1_5, DIMM_SR, NP, NP, 0, 0x00000000, 0x00112222},
+  {1, DDR667 + DDR800, V1_5, DIMM_DR, NP, NP, 0, 0x003B0000, 0x00112222},
+  {1, DDR1066, V1_5, DIMM_SR, NP, NP, 0, 0x00000000, 0x10112222},
+  {1, DDR1066, V1_5, DIMM_DR, NP, NP, 0, 0x00380000, 0x10112222},
+  {1, DDR1333, V1_5, DIMM_SR, NP, NP, 0, 0x00000000, 0x20112222},
+  {1, DDR1333, V1_5, DIMM_DR, NP, NP, 0, 0x00360000, 0x20112222},
+  {1, DDR1600 + DDR1866, V1_5, DIMM_SR, NP, NP, 0, 0x00000000, 0x30112222},
+  {1, DDR1600 + DDR1866, V1_5, DIMM_DR, NP, NP, 1, 0x00000000, 0x30112222},
+  {2, DDR667 + DDR800, V1_5, NP, DIMM_SR, NP, 0, 0x00000000, 0x00112222},
+  {2, DDR667 + DDR800, V1_5, NP, DIMM_DR, NP, 0, 0x003B0000, 0x00112222},
+  {2, DDR667, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00390039, 0x10222322},
+  {2, DDR800, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00390039, 0x20222322},
+  {2, DDR1066, V1_5, NP, DIMM_SR, NP, 0, 0x00000000, 0x10112222},
+  {2, DDR1066, V1_5, NP, DIMM_DR, NP, 0, 0x00380000, 0x10112222},
+  {2, DDR1066, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00350037, 0x30222322},
+  {2, DDR1333, V1_5, NP, DIMM_SR, NP, 0, 0x00000000, 0x20112222},
+  {2, DDR1333, V1_5, NP, DIMM_DR, NP, 0, 0x00360000, 0x20112222},
+  {2, DDR1333, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000035, 0x30222322},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, 0, 0x00000000, 0x30112222},
+  {2, DDR1600, V1_5, NP, DIMM_DR, NP, 1, 0x00000000, 0x30112222},
+  {2, DDR1600, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000033, 0x30222322}
+};
+CONST PSC_TBL_ENTRY SAOTblEntSOAM3 = {
+   {PSCFG_SAO, SODIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (OrAM3SODdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+   (VOID *)&OrAM3SODdr3SAO
+};
+// training configuratrions
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   2D
+//
+STATIC CONST PSCFG_S___ENTRY OrAM3SODdr3S__[] = {
+  {1, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0},
+  };
+CONST PSC_TBL_ENTRY S__TblEntSOAM3 = {
+   {PSCFG_S__, SODIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (OrAM3SODdr3S__) / sizeof (PSCFG_S___ENTRY),
+   (VOID *)&OrAM3SODdr3S__
+};
+// ODT pattern for 1 DPC
+// Format:
+//  Dimm0,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_1D_ODTPAT_ENTRY Or1SODdr3OdtPat[] = {
+  {DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00000001},
+  {DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x00000401}
+};
+CONST PSC_TBL_ENTRY OdtPat1DTblEntSOAM3 = {
+   {PSCFG_ODT_PAT_1D, SODIMM_TYPE, _1DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (Or1SODdr3OdtPat) / sizeof (PSCFG_1D_ODTPAT_ENTRY),
+   (VOID *)&Or1SODdr3OdtPat
+};
+
+// ODT pattern for 2 DPC
+// Format:
+//  Dimm0,   Dimm1,   ,RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG____ODTPAT_ENTRY Or2SODdr3OdtPat[] = {
+  {NP, DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00020000},
+  {NP, DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x08020000},
+  {DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0x00000000, 0x01010202, 0x00000000, 0x09030603}
+};
+CONST PSC_TBL_ENTRY OdtPat2DTblEntSOAM3 = {
+   {PSCFG_ODT_PAT___, SODIMM_TYPE, _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (Or2SODdr3OdtPat) / sizeof (PSCFG____ODTPAT_ENTRY),
+   (VOID *)&Or2SODdr3OdtPat
+};
+
+// ODT pattern for 3 DPC
+// Format:
+//  Dimm0,   Dimm1,   Dimm2,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_3D_ODTPAT_ENTRY Or3SODdr3OdtPat[] = {
+  {NP, NP, DIMM_SR + DIMM_DR, 0x00000000, 0x00000000, 0x00000404, 0x00000000},
+  {DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0x00000101, 0x00000404, 0x00000105, 0x00000405}
+};
+CONST PSC_TBL_ENTRY OdtPat3DTblEntSOAM3 = {
+   {PSCFG_ODT_PAT_3D, SODIMM_TYPE, _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (Or3SODdr3OdtPat) / sizeof (PSCFG_3D_ODTPAT_ENTRY),
+   (VOID *)&Or3SODdr3OdtPat
+};
+
+// Dram Term and Dynamic Dram Term
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   Dimm,   Rank,   RttNom,    RttWr
+//
+STATIC CONST PSCFG_RTT_ENTRY DramTermOrAM3SODIMM[] = {
+  {1, DDR667 + DDR800 + DDR1066, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 2, 0},
+  {1, DDR667 + DDR800 + DDR1066, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 2, 0},
+  {1, DDR1333, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 1, 0},
+  {1, DDR1333, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 1, 0},
+  {1, DDR1600 + DDR1866, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1600 + DDR1866, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 2, 0},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 2, 0},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, DIMM_SR, DIMM_SR + DIMM_DR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR1333, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 1, 0},
+  {2, DDR1333, V1_5, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 1, 0},
+  {2, DDR1333, V1_5, DIMM_SR, DIMM_SR + DIMM_DR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1333, V1_5, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_SR, NP, DIMM_SR, R0, 4, 1}
+};
+CONST PSC_TBL_ENTRY DramTermTblEntSOAM3 = {
+   {PSCFG_RTT, SODIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (DramTermOrAM3SODIMM) / sizeof (PSCFG_RTT_ENTRY),
+   (VOID *)&DramTermOrAM3SODIMM
+};
+
+// Max Freq.
+// Format :
+// DimmPerCh,   Dimms,   SR,   DR,   QR,   Speed1_5V,   Speed1_35V,   Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA MaxFreqOrAM3SODIMM[] = {
+  {1, 1, 1, 0, 0, DDR1866_FREQUENCY, 0, 0},
+  {1, 1, 0, 1, 0, DDR1866_FREQUENCY, 0, 0},
+  {2, 1, 1, 0, 0, DDR1600_FREQUENCY, 0, 0},
+  {2, 1, 0, 1, 0, DDR1600_FREQUENCY, 0, 0},
+  {2, 2, 2, 0, 0, DDR1600_FREQUENCY, 0, 0},
+  {2, 2, 1, 1, 0, DDR1333_FREQUENCY, 0, 0},
+  {2, 2, 0, 2, 0, DDR1333_FREQUENCY, 0, 0}
+};
+CONST PSC_TBL_ENTRY MaxFreqTblEntSOAM3 = {
+   {PSCFG_MAXFREQ, SODIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (MaxFreqOrAM3SODIMM) / sizeof (PSCFG_MAXFREQ_ENTRY),
+   (VOID *)&MaxFreqOrAM3SODIMM
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/AM3/mpUorA3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/AM3/mpUorA3.c
new file mode 100644
index 0000000000..e14c7b61cc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/AM3/mpUorA3.c
@@ -0,0 +1,278 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpUorA3.c
+ *
+ * Platform specific settings for OR AM3 DDR3 U-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/OR/AM3)
+ * @e \$Revision: 55134 $ @e \$Date: 2011-06-16 15:27:02 -0600 (Thu, 16 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_OR_AM3_MPUORA3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+// Slow mode, Address timing and Output drive compensation
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   SlowMode,   AddTmgCtl,   ODC
+//
+STATIC CONST PSCFG_SAO_ENTRY OrAM3UDdr3SAO[] = {
+  {1, DDR667 + DDR800, V1_5, DIMM_SR, NP, NP, 0, 0x00000000, 0x00112222},
+  {1, DDR667 + DDR800, V1_5, DIMM_DR, NP, NP, 0, 0x003B0000, 0x00112222},
+  {1, DDR1066, V1_5, DIMM_SR, NP, NP, 0, 0x00000000, 0x10112222},
+  {1, DDR1066, V1_5, DIMM_DR, NP, NP, 0, 0x00380000, 0x10112222},
+  {1, DDR1333, V1_5, DIMM_SR, NP, NP, 0, 0x00000000, 0x20112222},
+  {1, DDR1333, V1_5, DIMM_DR, NP, NP, 0, 0x00360000, 0x20112222},
+  {1, DDR1600, V1_5, DIMM_SR, NP, NP, 0, 0x00000000, 0x30112222},
+  {1, DDR1600, V1_5, DIMM_DR, NP, NP, 1, 0x00000000, 0x30112222},
+  {1, DDR1866, V1_5, DIMM_SR, NP, NP, 0, 0x00000000, 0x30332222},
+  {1, DDR1866, V1_5, DIMM_DR, NP, NP, 1, 0x00000000, 0x30332222},
+  {2, DDR667 + DDR800, V1_5, NP, DIMM_SR, NP, 0, 0x00000000, 0x00112222},
+  {2, DDR667 + DDR800, V1_5, NP, DIMM_DR, NP, 0, 0x003B0000, 0x00112222},
+  {2, DDR667, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00390039, 0x10222322},
+  {2, DDR800, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00390039, 0x20222322},
+  {2, DDR1066, V1_5, NP, DIMM_SR, NP, 0, 0x00000000, 0x10112222},
+  {2, DDR1066, V1_5, NP, DIMM_DR, NP, 0, 0x00380000, 0x10112222},
+  {2, DDR1066, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00350037, 0x30222322},
+  {2, DDR1333, V1_5, NP, DIMM_SR, NP, 0, 0x00000000, 0x20112222},
+  {2, DDR1333, V1_5, NP, DIMM_DR, NP, 0, 0x00360000, 0x20112222},
+  {2, DDR1333, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000035, 0x30222322},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, 0, 0x00000000, 0x30112222},
+  {2, DDR1600, V1_5, NP, DIMM_DR, NP, 1, 0x00000000, 0x30112222},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_SR, NP, 1, 0x00000033, 0x30222322},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_DR, NP, 1, 0x00000033, 0x30222322},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000033, 0x30222322},
+  {2, DDR1866, V1_5, NP, DIMM_SR, NP, 0, 0x00000000, 0x30332222},
+  {2, DDR1866, V1_5, NP, DIMM_DR, NP, 1, 0x00000000, 0x30332222},
+};
+CONST PSC_TBL_ENTRY SAOTblEntUAM3 = {
+   {PSCFG_SAO, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (OrAM3UDdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+   (VOID *)&OrAM3UDdr3SAO
+};
+// training configuratrions
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   2D
+//
+STATIC CONST PSCFG_S___ENTRY OrAM3UDdr3S__[] = {
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {1, DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600 + DDR1866, V1_5, DIMM_SR + DIMM_DR, NP, NP, 0},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {2, DDR667 + DDR800 + DDR1066 + DDR1333, V1_5, NP + DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1600, V1_5, NP, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_SR, NP, 0},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_DR, NP, 0},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1866, V1_5, NP, DIMM_SR + DIMM_DR, NP, 0},  };
+CONST PSC_TBL_ENTRY S__TblEntUAM3 = {
+   {PSCFG_S__, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (OrAM3UDdr3S__) / sizeof (PSCFG_S___ENTRY),
+   (VOID *)&OrAM3UDdr3S__
+};
+// ODT pattern for 1 DPC
+// Format:
+//  Dimm0,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_1D_ODTPAT_ENTRY Or1UDdr3OdtPat[] = {
+  {DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00000001},
+  {DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x00000401}
+};
+CONST PSC_TBL_ENTRY OdtPat1DTblEntUAM3 = {
+   {PSCFG_ODT_PAT_1D, UDIMM_TYPE, _1DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (Or1UDdr3OdtPat) / sizeof (PSCFG_1D_ODTPAT_ENTRY),
+   (VOID *)&Or1UDdr3OdtPat
+};
+
+// ODT pattern for 2 DPC
+// Format:
+//  Dimm0,   Dimm1,   ,RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG____ODTPAT_ENTRY Or2UDdr3OdtPat[] = {
+  {NP, DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00020000},
+  {NP, DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x08020000},
+  {DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0x00000000, 0x01010202, 0x00000000, 0x09030603}
+};
+CONST PSC_TBL_ENTRY OdtPat2DTblEntUAM3 = {
+   {PSCFG_ODT_PAT___, UDIMM_TYPE, _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (Or2UDdr3OdtPat) / sizeof (PSCFG____ODTPAT_ENTRY),
+   (VOID *)&Or2UDdr3OdtPat
+};
+
+// ODT pattern for 3 DPC
+// Format:
+//  Dimm0,   Dimm1,   Dimm2,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_3D_ODTPAT_ENTRY Or3UDdr3OdtPat[] = {
+  {NP, NP, DIMM_SR + DIMM_DR, 0x00000000, 0x00000000, 0x00000004, 0x00000000},
+  {DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0x00000101, 0x00000404, 0x00000105, 0x00000405}
+};
+CONST PSC_TBL_ENTRY OdtPat3DTblEntUAM3 = {
+   {PSCFG_ODT_PAT_3D, UDIMM_TYPE, _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (Or3UDdr3OdtPat) / sizeof (PSCFG_3D_ODTPAT_ENTRY),
+   (VOID *)&Or3UDdr3OdtPat
+};
+
+// Dram Term and Dynamic Dram Term
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   Dimm,   Rank,   RttNom,    RttWr
+//
+STATIC CONST PSCFG_RTT_ENTRY DramTermOrAM3UDIMM[] = {
+  {1, DDR667 + DDR800 + DDR1066, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 2, 0},
+  {1, DDR667 + DDR800 + DDR1066, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 2, 0},
+  {1, DDR1333, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 1, 0},
+  {1, DDR1333, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 1, 0},
+  {1, DDR1600 + DDR1866, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1600 + DDR1866, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 2, 0},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 2, 0},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, DIMM_SR, DIMM_SR + DIMM_DR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR1333, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 1, 0},
+  {2, DDR1333, V1_5, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 1, 0},
+  {2, DDR1333, V1_5, DIMM_SR, DIMM_SR + DIMM_DR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1333, V1_5, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 3, 0},
+  {2, DDR1600, V1_5, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 0},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_SR, NP, DIMM_SR, R0, 4, 1},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_DR, NP, DIMM_SR, R0, 4, 1},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 4, 1},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 4, 1},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 4, 1},
+  {2, DDR1866, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 3, 0},
+  {2, DDR1866, V1_5, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 0},
+};
+CONST PSC_TBL_ENTRY DramTermTblEntUAM3 = {
+   {PSCFG_RTT, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (DramTermOrAM3UDIMM) / sizeof (PSCFG_RTT_ENTRY),
+   (VOID *)&DramTermOrAM3UDIMM
+};
+
+// Max Freq.
+// Format :
+// DimmPerCh,   Dimms,   SR,   DR,   QR,   Speed1_5V,   Speed1_35V,   Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA MaxFreqOrAM3UDIMM[] = {
+  {1, 1, 1, 0, 0, DDR1866_FREQUENCY, 0, 0},
+  {1, 1, 0, 1, 0, DDR1866_FREQUENCY, 0, 0},
+  {2, 1, 1, 0, 0, DDR1600_FREQUENCY, 0, 0},
+  {2, 1, 0, 1, 0, DDR1600_FREQUENCY, 0, 0},
+  {2, 2, 2, 0, 0, DDR1600_FREQUENCY, 0, 0},
+  {2, 2, 1, 1, 0, DDR1333_FREQUENCY, 0, 0},
+  {2, 2, 0, 2, 0, DDR1333_FREQUENCY, 0, 0}
+};
+CONST PSC_TBL_ENTRY MaxFreqTblEntUAM3 = {
+   {PSCFG_MAXFREQ, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (MaxFreqOrAM3UDIMM) / sizeof (PSCFG_MAXFREQ_ENTRY),
+   (VOID *)&MaxFreqOrAM3UDIMM
+};
+
+//
+// MemClkDis
+//
+STATIC CONST UINT8 ROMDATA OrUDdr3CLKDis[] = {0x02, 0x01, 0x08, 0x04, 0x00, 0x00, 0x00, 0x00};
+CONST PSC_TBL_ENTRY ClkDisMapEntUAM3 = {
+   {PSCFG_CLKDIS, UDIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (OrUDdr3CLKDis) / sizeof (UINT8),
+   (VOID *)&OrUDdr3CLKDis
+};
+
+//
+// WL pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA WLPas1SeedOrAM3UDIMM[] = {
+  {_1DIMM + _2DIMM + _3DIMM, CH_ALL, 0x0F}
+};
+CONST PSC_TBL_ENTRY WLPass1SeedEntUAM3 = {
+   {PSCFG_WL_PASS1_SEED, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (WLPas1SeedOrAM3UDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&WLPas1SeedOrAM3UDIMM
+};
+
+//
+// HW RxEn pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA HWRxEnPas1SeedOrAM3UDIMM[] = {
+  {_1DIMM + _2DIMM, CH_A + CH_B, 0x3A},
+};
+CONST PSC_TBL_ENTRY HWRxEnPass1SeedEntUAM3 = {
+   {PSCFG_HWRXEN_PASS1_SEED, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_AM3, DDR3_TECHNOLOGY},
+   sizeof (HWRxEnPas1SeedOrAM3UDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&HWRxEnPas1SeedOrAM3UDIMM
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/C32/mpLorC3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/C32/mpLorC3.c
new file mode 100644
index 0000000000..711acef9c6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/C32/mpLorC3.c
@@ -0,0 +1,320 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpLorC3.c
+ *
+ * Platform specific settings for OR C32 DDR3 LRDIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/OR/C32)
+ * @e \$Revision: 56315 $ @e \$Date: 2011-07-11 15:59:14 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "GeneralServices.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+
+#define FILECODE PROC_MEM_PS_OR_C32_MPLORC3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+// Slow mode, Address timing and Output drive compensation
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   SlowMode,   AddTmgCtl,  ODC
+//
+STATIC CONST PSCFG_SAO_ENTRY OrC32LRDdr3SAO[] = {
+  {1, DDR667, VOLT_ALL, DIMM_LR, NP, NP, 0, 0x00000000, 0x00112222},
+  {1, DDR800, VOLT_ALL, DIMM_LR, NP, NP, 0, 0x00000000, 0x10112222},
+  {1, DDR1066, VOLT_ALL, DIMM_LR, NP, NP, 0, 0x003C3C3C, 0x20112222},
+  {1, DDR1333, VOLT_ALL, DIMM_LR, NP, NP, 0, 0x003A3A3A, 0x30112222},
+  {1, DDR1600, V1_5, DIMM_LR, NP, NP, 0, 0x00393939, 0x30112222},
+  {1, DDR1600, V1_35, DIMM_LR, NP, NP, 0, 0x00393939, 0x30112222},
+  {1, DDR1866, V1_5, DIMM_LR, NP, NP, 0, 0x00393939, 0x30332222},
+  {2, DDR667, VOLT_ALL, NP, DIMM_LR, NP, 0, 0x00000000, 0x00112222},
+  {2, DDR667, VOLT_ALL, DIMM_LR, DIMM_LR, NP, 0, 0x00000000, 0x10222222},
+  {2, DDR800, VOLT_ALL, NP, DIMM_LR, NP, 0, 0x00000000, 0x10112222},
+  {2, DDR800, VOLT_ALL, DIMM_LR, DIMM_LR, NP, 0, 0x00000000, 0x20222222},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_LR, NP, 0, 0x00393C39, 0x20112222},
+  {2, DDR1066, VOLT_ALL, DIMM_LR, DIMM_LR, NP, 0, 0x003A3C3A, 0x30222222},
+  {2, DDR1333, VOLT_ALL, NP, DIMM_LR, NP, 0, 0x00373A37, 0x30112222},
+  {2, DDR1600, V1_5, NP, DIMM_LR, NP, 0, 0x00363936, 0x30112222},
+  {2, DDR1333, V1_5 + V1_35, DIMM_LR, DIMM_LR, NP, 0, 0x00383A38, 0x30222222},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_LR, 0, 0x00000000, 0x00332222},
+  {3, DDR667, VOLT_ALL, DIMM_LR, NP, DIMM_LR, 0, 0x00000000, 0x20222222},
+  {3, DDR667, VOLT_ALL, DIMM_LR, DIMM_LR, DIMM_LR, 0, 0x00380038, 0x30112222},
+  {3, DDR800, VOLT_ALL, NP, NP, DIMM_LR, 0, 0x00390039, 0x10332222},
+  {3, DDR800, VOLT_ALL, DIMM_LR, NP, DIMM_LR, 0, 0x003A003A, 0x30222222},
+  {3, DDR800, V1_5 + V1_35, DIMM_LR, DIMM_LR, DIMM_LR, 0, 0x00360036, 0x30112222},
+  {3, DDR1066, VOLT_ALL, NP, NP, DIMM_LR, 0, 0x00373C37, 0x20332222},
+  {3, DDR1066, VOLT_ALL, DIMM_LR, NP, DIMM_LR, 0, 0x00383C38, 0x30222222},
+  {3, DDR1333, VOLT_ALL, NP, NP, DIMM_LR, 0, 0x00353A35, 0x30332222},
+  {3, DDR1600, V1_5, NP, NP, DIMM_LR, 0, 0x00333933, 0x30332222},
+  {3, DDR800, V1_25, DIMM_LR, DIMM_LR, DIMM_LR, 0, 0x00360036, 0x30112222},
+  {3, DDR1066, V1_5, DIMM_LR, DIMM_LR, DIMM_LR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1333, V1_5 + V1_35, DIMM_LR, NP, DIMM_LR, 0, 0x00363A36, 0x30222222},
+};
+CONST PSC_TBL_ENTRY SAOTblEntLRC32 = {
+   {PSCFG_SAO, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (OrC32LRDdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+   (VOID *)&OrC32LRDdr3SAO
+};
+// training configuratrions
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   2D
+//
+STATIC CONST PSCFG_S___ENTRY OrC32LRDdr3S__[] = {
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {1, DDR667 + DDR800 + DDR1066 + DDR1333, VOLT_ALL, DIMM_LR, NP, NP, 1},
+  {1, DDR1600, V1_5, DIMM_LR, NP, NP, 1},
+  {1, DDR1600, V1_35, DIMM_LR, NP, NP, 1},
+  {1, DDR1866, V1_5, DIMM_LR, NP, NP, 1},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, NP + DIMM_LR, DIMM_LR, NP, 1},
+  {2, DDR1333, VOLT_ALL, NP, DIMM_LR, NP, 1},
+  {2, DDR1600, V1_5, NP, DIMM_LR, NP, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_LR, DIMM_LR, NP, 1},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {3, DDR667 + DDR1333, VOLT_ALL, NP, NP, DIMM_LR, 1},
+  {3, DDR667, VOLT_ALL, DIMM_LR, NP + DIMM_LR, DIMM_LR, 1},
+  {3, DDR800, V1_5 + V1_35, NP, NP, DIMM_LR, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_LR, NP + DIMM_LR, DIMM_LR, 1},
+  {3, DDR800, V1_25, NP + DIMM_LR, NP, DIMM_LR, 1},
+  {3, DDR1066, VOLT_ALL, NP + DIMM_LR, NP, DIMM_LR, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_LR, 1},
+  {3, DDR800, V1_25, DIMM_LR, DIMM_LR, DIMM_LR, 1},
+  {3, DDR1066, V1_5, DIMM_LR, DIMM_LR, DIMM_LR, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_LR, NP, DIMM_LR, 1},
+  };
+CONST PSC_TBL_ENTRY S__TblEntLRC32 = {
+   {PSCFG_S__, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (OrC32LRDdr3S__) / sizeof (PSCFG_S___ENTRY),
+   (VOID *)&OrC32LRDdr3S__
+};
+// ODT pattern for 1 DPC
+// Format:
+//  Dimm0,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_1D_ODTPAT_ENTRY Or1LRDdr3OdtPat[] = {
+  {DIMM_LR, 0x00000000, 0x00000000, 0x00000101, 0x00000101}
+};
+CONST PSC_TBL_ENTRY OdtPat1DTblEntLRC32 = {
+   {PSCFG_ODT_PAT_1D, LRDIMM_TYPE, _1DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or1LRDdr3OdtPat) / sizeof (PSCFG_1D_ODTPAT_ENTRY),
+   (VOID *)&Or1LRDdr3OdtPat
+};
+
+// ODT pattern for 2 DPC
+// Format:
+//  Dimm0,   Dimm1,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG____ODTPAT_ENTRY Or2LRDdr3OdtPat[] = {
+  {NP, DIMM_LR, 0x00000000, 0x00000000, 0x02020000, 0x02020000},
+  {DIMM_LR, DIMM_LR, 0x01010202, 0x01010202, 0x03030303, 0x03030303}
+};
+CONST PSC_TBL_ENTRY OdtPat2DTblEntLRC32 = {
+   {PSCFG_ODT_PAT___, LRDIMM_TYPE, _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or2LRDdr3OdtPat) / sizeof (PSCFG____ODTPAT_ENTRY),
+   (VOID *)&Or2LRDdr3OdtPat
+};
+
+// ODT pattern for 3 DPC
+// Format:
+//  Dimm0,   Dimm1,   Dimm2,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_3D_ODTPAT_ENTRY Or3LRDdr3OdtPat[] = {
+  {NP, NP, DIMM_LR, 0x00000000, 0x00000000, 0x00000404, 0x00000000},
+  {DIMM_LR, NP, DIMM_LR, 0x00000101, 0x00000404, 0x00000505, 0x00000505},
+  {DIMM_LR, DIMM_LR, DIMM_LR, 0x00000303, 0x05050606, 0x00000707, 0x07070707}
+};
+CONST PSC_TBL_ENTRY OdtPat3DTblEntLRC32 = {
+   {PSCFG_ODT_PAT_3D, LRDIMM_TYPE, _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or3LRDdr3OdtPat) / sizeof (PSCFG_3D_ODTPAT_ENTRY),
+   (VOID *)&Or3LRDdr3OdtPat
+};
+
+// Dram Term and Dynamic Dram Term
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,  RttNom,   RttWr
+//
+STATIC CONST PSCFG_LR_RTT_ENTRY DramTermOrC32LRDIMM[] = {
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_LR, NP, NP, 2, 0},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_LR, NP, NP, 1, 0},
+  {1, DDR1600, V1_5, DIMM_LR, NP, NP, 3, 0},
+  {1, DDR1600, V1_35, DIMM_LR, NP, NP, 3, 0},
+  {1, DDR1866, V1_5, DIMM_LR, NP, NP, 3, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_LR, NP, 2, 0},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_LR, DIMM_LR, NP, 3, 2},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_LR, NP, 1, 0},
+  {2, DDR1600, V1_5, NP, DIMM_LR, NP, 3, 0},
+  {2, DDR1333, V1_5 + V1_35, DIMM_LR, DIMM_LR, NP, 5, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_LR, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_LR, NP + DIMM_LR, DIMM_LR, 3, 2},
+  {3, DDR800 + DDR1066, VOLT_ALL, DIMM_LR, NP, DIMM_LR, 3, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_LR, DIMM_LR, DIMM_LR, 5, 2},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_LR, 0, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_LR, 0, 1},
+  {3, DDR800, V1_25, DIMM_LR, DIMM_LR, DIMM_LR, 5, 2},
+  {3, DDR1066, V1_5, DIMM_LR, DIMM_LR, DIMM_LR, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_LR, NP, DIMM_LR, 5, 2},
+};
+CONST PSC_TBL_ENTRY DramTermTblEntLRC32 = {
+   {PSCFG_LR_RTT, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (DramTermOrC32LRDIMM) / sizeof (PSCFG_LR_RTT_ENTRY),
+   (VOID *)&DramTermOrC32LRDIMM
+};
+// Max Freq.
+// Format :
+// DimmPerCh,   Dimms,  LR,   Speed1_5V,   Speed1_35V,   Speed1_25V
+//
+STATIC CONST PSCFG_LR_MAXFREQ_ENTRY ROMDATA MaxFreqOrC32LRDIMM[] = {
+  {{1, 1, 1, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 1, 1, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 2, 2, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 1, 1, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 2, 2, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 3, 3, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR667_FREQUENCY}}
+};
+CONST PSC_TBL_ENTRY MaxFreqTblEntLRC32 = {
+   {PSCFG_LR_MAXFREQ, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (MaxFreqOrC32LRDIMM) / sizeof (PSCFG_LR_MAXFREQ_ENTRY),
+   (VOID *)&MaxFreqOrC32LRDIMM
+};
+
+// IBT
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   F0RC8,   F1RC0,   F1RC1,   F1RC2
+//
+STATIC CONST PSCFG_L_IBT_ENTRY OrLRDdr3IBT[] = {
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_LR, NP, NP, 1, 1, 1, 1},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_LR, NP, NP, 0, 0, 0, 0},
+  {1, DDR1600, V1_5, DIMM_LR, NP, NP, 0, 0, 0, 0},
+  {1, DDR1600, V1_35, DIMM_LR, NP, NP, 0, 0, 0, 0},
+  {1, DDR1866, V1_5, DIMM_LR, NP, NP, 0, 0, 0, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP + DIMM_LR, DIMM_LR, NP, 1, 1, 1, 1},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_LR, NP, 0, 0, 0, 0},
+  {2, DDR1066, VOLT_ALL, DIMM_LR, DIMM_LR, NP, 1, 1, 1, 1},
+  {2, DDR1600, V1_5, NP, DIMM_LR, NP, 0, 0, 0, 0},
+  {2, DDR1333, V1_5 + V1_35, DIMM_LR, DIMM_LR, NP, 1, 1, 1, 1},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_LR, NP + DIMM_LR, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR800 + DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_LR, 0, 0, 0, 0},
+  {3, DDR800, V1_5 + V1_35, DIMM_LR, NP + DIMM_LR, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR800, V1_25, DIMM_LR, NP, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR1066, VOLT_ALL, DIMM_LR, NP, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_LR, 0, 0, 0, 0},
+  {3, DDR800, V1_25, DIMM_LR, DIMM_LR, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR1066, V1_5, DIMM_LR, DIMM_LR, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_LR, NP, DIMM_LR, 1, 1, 1, 1},
+};
+CONST PSC_TBL_ENTRY IBTTblEntLRC32 = {
+   {PSCFG_LR_IBT, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (OrLRDdr3IBT) / sizeof (PSCFG_L_IBT_ENTRY),
+   (VOID *)&OrLRDdr3IBT
+};
+
+//
+// MemClkDis
+//
+STATIC CONST UINT8 ROMDATA Or3LRDdr3CLKDis[] = {0x03, 0x0C, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00};
+CONST PSC_TBL_ENTRY ClkDisMapEntLRC32 = {
+   {PSCFG_CLKDIS, LRDIMM_TYPE, _1DIMM + _2DIMM + _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or3LRDdr3CLKDis) / sizeof (UINT8),
+   (VOID *)&Or3LRDdr3CLKDis
+};
+
+//
+// WL pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA WLPas1SeedOrC32LRDIMM[] = {
+  {_1DIMM + _2DIMM + _3DIMM, CH_ALL, 0xF7}
+};
+CONST PSC_TBL_ENTRY WLPass1SeedEntLRC32 = {
+   {PSCFG_WL_PASS1_SEED, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (WLPas1SeedOrC32LRDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&WLPas1SeedOrC32LRDIMM
+};
+
+//
+// HW RxEn pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA HWRxEnPas1SeedOrC32LRDIMM[] = {
+  {_1DIMM + _2DIMM + _3DIMM, CH_A, 0x132},
+  {_1DIMM + _2DIMM + _3DIMM, CH_B, 0x122}
+};
+CONST PSC_TBL_ENTRY HWRxEnPass1SeedEntLRC32 = {
+   {PSCFG_HWRXEN_PASS1_SEED, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (HWRxEnPas1SeedOrC32LRDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&HWRxEnPas1SeedOrC32LRDIMM
+};
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/C32/mpRorC3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/C32/mpRorC3.c
new file mode 100644
index 0000000000..de25ec8de9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/C32/mpRorC3.c
@@ -0,0 +1,653 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpRorC3.c
+ *
+ * Platform specific settings for OR C32 DDR3 R-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/OR/C32)
+ * @e \$Revision: 55134 $ @e \$Date: 2011-06-16 15:27:02 -0600 (Thu, 16 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "GeneralServices.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_OR_C32_MPRORC3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+// Slow mode, Address timing and Output drive compensation
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   SlowMode,   AddTmgCtl,  ODC
+//
+STATIC CONST PSCFG_SAO_ENTRY OrC32RDdr3SAO[] = {
+  {1, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00000000, 0x00112222},
+  {1, DDR667, VOLT_ALL, DIMM_QR, NP, NP, 0, 0x00000000, 0x00222222},
+  {1, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00000000, 0x10112222},
+  {1, DDR800, VOLT_ALL, DIMM_QR, NP, NP, 0, 0x00000000, 0x10222222},
+  {1, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x003C3C3C, 0x20112222},
+  {1, DDR1066, VOLT_ALL, DIMM_QR, NP, NP, 0, 0x003C3C3C, 0x30222222},
+  {1, DDR1333, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x003A3A3A, 0x30112222},
+  {1, DDR1333, V1_5, DIMM_QR, NP, NP, 0, 0x003A3A3A, 0x30222222},
+  {1, DDR1600, V1_5, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00393939, 0x30112222},
+  {1, DDR1333, V1_35, DIMM_QR, NP, NP, 0, 0x003A3A3A, 0x30222222},
+  {1, DDR1600, V1_35, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00393939, 0x30112222},
+  {1, DDR1866, V1_5, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00393939, 0x30332222},
+  {2, DDR667, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00000000, 0x00112222},
+  {2, DDR667, VOLT_ALL, NP, DIMM_QR, NP, 0, 0x00000000, 0x00222222},
+  {2, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0, 0x00000000, 0x10222222},
+  {2, DDR800, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00000000, 0x10112222},
+  {2, DDR800, VOLT_ALL, NP, DIMM_QR, NP, 0, 0x00000000, 0x10222222},
+  {2, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0, 0x00000000, 0x20222222},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00393C39, 0x20112222},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_QR, NP, 0, 0x00393C39, 0x20222222},
+  {2, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x003A3C3A, 0x30222222},
+  {2, DDR1333, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00373A37, 0x30112222},
+  {2, DDR1333, V1_5, NP, DIMM_QR, NP, 0, 0x00373A37, 0x30222222},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_SR, NP, 0, 0x00383A38, 0x30222222},
+  {2, DDR1600, V1_5, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00363936, 0x30112222},
+  {2, DDR1066, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, 0, 0x003A3C3A, 0x30222222},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0, 0x003A3C3A, 0x30222222},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, 0, 0x00383A38, 0x30222222},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00383A38, 0x30222222},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, 0, 0x00373A37, 0x30222222},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, 0, 0x00383A38, 0x30222222},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00000000, 0x00332222},
+  {3, DDR667, VOLT_ALL, NP, DIMM_QR, NP, 0, 0x00000000, 0x10222222},
+  {3, DDR667, VOLT_ALL, NP, DIMM_QR, DIMM_SR + DIMM_DR, 0, 0x00000000, 0x20222222},
+  {3, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x00000000, 0x10222222},
+  {3, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR, 0, 0x00380038, 0x30112222},
+  {3, DDR800, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00390039, 0x10332222},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, NP, 0, 0x00390039, 0x20222222},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, DIMM_SR + DIMM_DR, 0, 0x003A003A, 0x30222222},
+  {3, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x003A003A, 0x20222222},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00360036, 0x30112222},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_SR, 0, 0x00360036, 0x30112222},
+  {3, DDR1066, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00373C37, 0x20332222},
+  {3, DDR1066, V1_5, NP, DIMM_QR, NP, 0, 0x00373C37, 0x30222222},
+  {3, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x00383C38, 0x30222222},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_SR, DIMM_SR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1333, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00353A35, 0x30332222},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_SR, 0, 0x00363A36, 0x30222222},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00333933, 0x30332222},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, 0, 0x00360036, 0x30112222},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_DR, 0, 0x00360036, 0x30112222},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00360036, 0x30112222},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00360036, 0x30112222},
+  {3, DDR1066, V1_5, NP, DIMM_QR, DIMM_SR + DIMM_DR, 0, 0x00383C38, 0x30222222},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_SR, DIMM_DR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1066, V1_35, NP, DIMM_QR, NP, 0, 0x00373C37, 0x30222222},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_SR, DIMM_SR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, 0, 0x00363A36, 0x30222222},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_SR, DIMM_SR, 0, 0x00303A30, 0x30112222},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x00363A36, 0x30222222},
+  {3, DDR1333, V1_25, DIMM_SR, NP, DIMM_SR, 0, 0x00363A36, 0x30222222},
+};
+CONST PSC_TBL_ENTRY SAOTblEntRC32 = {
+   {PSCFG_SAO, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (OrC32RDdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+   (VOID *)&OrC32RDdr3SAO
+};
+// training configuratrions
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   2D
+//
+STATIC CONST PSCFG_S___ENTRY OrC32RDdr3S__[] = {
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {1, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR + DIMM_QR, NP, NP, 1},
+  {1, DDR1333, V1_5, DIMM_SR + DIMM_DR + DIMM_QR, NP, NP, 1},
+  {1, DDR1333, V1_35 + V1_25, DIMM_SR + DIMM_DR, NP, NP, 1},
+  {1, DDR1600, V1_5, DIMM_SR + DIMM_DR, NP, NP, 1},
+  {1, DDR1333, V1_35, DIMM_QR, NP, NP, 1},
+  {1, DDR1600, V1_35, DIMM_SR + DIMM_DR, NP, NP, 1},
+  {1, DDR1866, V1_5, DIMM_SR + DIMM_DR, NP, NP, 1},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {2, DDR667 + DDR800, VOLT_ALL, NP + DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 1},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_SR + DIMM_DR + DIMM_QR, NP, 1},
+  {2, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1},
+  {2, DDR1333, V1_5, NP, DIMM_SR + DIMM_DR + DIMM_QR, NP, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_SR, NP, 1},
+  {2, DDR1333, V1_35 + V1_25, NP, DIMM_SR + DIMM_DR, NP, 1},
+  {2, DDR1600, V1_5, NP, DIMM_SR + DIMM_DR, NP, 1},
+  {2, DDR1066, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR + DIMM_DR, NP, 1},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, 1},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, 1},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {3, DDR667 + DDR1333, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, NP + DIMM_SR + DIMM_DR, 1},
+  {3, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, NP + DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_5 + V1_35, NP, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR + DIMM_DR, NP + DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_25, NP + DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_SR, 1},
+  {3, DDR1066, VOLT_ALL, NP + DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1066, V1_5, NP, DIMM_QR, NP, 1},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_SR, DIMM_SR, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_SR, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_DR, 1},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1066, V1_5, NP, DIMM_QR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_SR, DIMM_DR, 1},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1066, V1_35, NP, DIMM_QR, NP, 1},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_SR, DIMM_SR, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, 1},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_SR, DIMM_SR, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, V1_25, DIMM_SR, NP, DIMM_SR, 1},
+  };
+CONST PSC_TBL_ENTRY S__TblEntRC32 = {
+   {PSCFG_S__, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (OrC32RDdr3S__) / sizeof (PSCFG_S___ENTRY),
+   (VOID *)&OrC32RDdr3S__
+};
+// ODT pattern for 1 DPC
+// Format:
+//  Dimm0,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_1D_ODTPAT_ENTRY Or1RDdr3OdtPat[] = {
+  {DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00000001},
+  {DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x00000401},
+  {DIMM_QR, 0x00000000, 0x00000000, 0x00000505, 0x00000505}
+};
+CONST PSC_TBL_ENTRY OdtPat1DTblEntRC32 = {
+   {PSCFG_ODT_PAT_1D, RDIMM_TYPE, _1DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or1RDdr3OdtPat) / sizeof (PSCFG_1D_ODTPAT_ENTRY),
+   (VOID *)&Or1RDdr3OdtPat
+};
+
+// ODT pattern for 2 DPC
+// Format:
+//  Dimm0,   Dimm1,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG____ODTPAT_ENTRY Or2RDdr3OdtPat[] = {
+  {NP, DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00020000},
+  {NP, DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x08020000},
+  {NP, DIMM_QR, 0x00000000, 0x00000000, 0x020A0000, 0x080A0000},
+  {DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0x00000000, 0x01010202, 0x00000000, 0x09030603},
+  {DIMM_SR + DIMM_DR, DIMM_QR, 0x01010000, 0x01010A0A, 0x01090000, 0x01030E0B},
+  {DIMM_QR, DIMM_SR + DIMM_DR, 0x00000202, 0x05050202, 0x00000206, 0x0D070203},
+  {DIMM_QR, DIMM_QR, 0x05050A0A, 0x05050A0A, 0x050D0A0E, 0x05070A0B}
+};
+CONST PSC_TBL_ENTRY OdtPat2DTblEntRC32 = {
+   {PSCFG_ODT_PAT___, RDIMM_TYPE, _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or2RDdr3OdtPat) / sizeof (PSCFG____ODTPAT_ENTRY),
+   (VOID *)&Or2RDdr3OdtPat
+};
+
+// ODT pattern for 3 DPC
+// Format:
+//  Dimm0,   Dimm1,   Dimm2,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_3D_ODTPAT_ENTRY Or3RDdr3OdtPat[] = {
+  {NP, NP, DIMM_SR + DIMM_DR, 0x00000000, 0x00000000, 0x00000004, 0x00000000},
+  {DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0x00000101, 0x00000404, 0x00000105, 0x00000405},
+  {DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0x00000303, 0x05050606, 0x00000307, 0x0D070607},
+  {NP, DIMM_QR, NP, 0x00000000, 0x00000000, 0x020A0000, 0x080A0000},
+  {NP, DIMM_QR, DIMM_SR + DIMM_DR, 0x04040A0A, 0x04040000, 0x040C0A0E, 0x04060000},
+  {DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, 0x05050B0B, 0x05050E0E, 0x050D0B0F, 0x05070E0F}
+};
+CONST PSC_TBL_ENTRY OdtPat3DTblEntRC32 = {
+   {PSCFG_ODT_PAT_3D, RDIMM_TYPE, _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or3RDdr3OdtPat) / sizeof (PSCFG_3D_ODTPAT_ENTRY),
+   (VOID *)&Or3RDdr3OdtPat
+};
+
+// Dram Term and Dynamic Dram Term
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   Dimm,   Rank,   RttNom,    RttWr
+//
+STATIC CONST PSCFG_RTT_ENTRY DramTermOrC32RDIMM[] = {
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, R0, 2, 0},
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 2, 0},
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, R0 + R2, 2, 2},
+  {1, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, R1 + R3, 0, 2},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, R0, 1, 0},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 1, 0},
+  {1, DDR1066, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, R0 + R2, 1, 2},
+  {1, DDR1333, V1_5, DIMM_QR, NP, NP, DIMM_QR, R0 + R2, 3, 2},
+  {1, DDR1333, V1_5, DIMM_QR, NP, NP, DIMM_QR, R1 + R3, 0, 2},
+  {1, DDR1600, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1600, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {1, DDR1333, V1_35, DIMM_QR, NP, NP, DIMM_QR, R0 + R2, 3, 2},
+  {1, DDR1333, V1_35, DIMM_QR, NP, NP, DIMM_QR, R1 + R3, 0, 2},
+  {1, DDR1600, V1_35, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1600, V1_35, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {1, DDR1866, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1866, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_SR, NP, DIMM_SR, R0, 2, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 2, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 2, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, NP + DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, DIMM_SR + DIMM_DR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_SR, DIMM_QR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_DR, DIMM_QR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_SR, NP, DIMM_SR, R0, 1, 0},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 1, 0},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 2},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {2, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 3, 2},
+  {2, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 3, 0},
+  {2, DDR1600, V1_5, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 0},
+  {2, DDR1066, V1_5, DIMM_SR, DIMM_QR, NP, DIMM_SR, R0, 5, 1},
+  {2, DDR1066, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 1},
+  {2, DDR1066, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 1},
+  {2, DDR1066, V1_5, DIMM_DR, DIMM_QR, NP, DIMM_DR, R0 + R1, 5, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR, NP, DIMM_SR, R0, 5, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 3, 2},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 2},
+  {3, DDR667, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 2, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, NP + DIMM_SR + DIMM_DR, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR667, VOLT_ALL, NP + DIMM_SR, DIMM_QR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR667, VOLT_ALL, NP + DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R0 + R2, 1, 2},
+  {3, DDR667, VOLT_ALL, NP + DIMM_DR, DIMM_QR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, NP + DIMM_SR, DIMM_SR, DIMM_SR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, NP + DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, NP + DIMM_SR + DIMM_QR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, DIMM_QR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR667, VOLT_ALL, DIMM_DR, NP + DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_DR, NP + DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_DR, NP + DIMM_DR, DIMM_DR, DIMM_DR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_DR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, NP + DIMM_SR + DIMM_DR, DIMM_QR, R0 + R2, 1, 2},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR800 + DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 3, 2},
+  {3, DDR800 + DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, NP + DIMM_SR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, VOLT_ALL, DIMM_SR, DIMM_SR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800 + DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, NP + DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800 + DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_DR, DIMM_DR, R0, 3, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_25, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 1},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 1},
+  {3, DDR1066, V1_5, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 2},
+  {3, DDR1066, V1_5, NP, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_SR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_QR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R0 + R2, 1, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_QR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_QR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_QR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_5, NP, DIMM_QR, DIMM_SR, DIMM_SR, R0, 5, 1},
+  {3, DDR1066, V1_5, NP, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R0 + R2, 1, 1},
+  {3, DDR1066, V1_5, NP, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R1 + R3, 0, 1},
+  {3, DDR1066, V1_5, NP, DIMM_QR, DIMM_DR, DIMM_DR, R0, 5, 1},
+  {3, DDR1066, V1_5, NP, DIMM_QR, DIMM_DR, DIMM_DR, R1, 0, 1},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_35, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 2},
+  {3, DDR1066, V1_35, NP, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_SR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_SR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_25, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 5, 2},
+};
+CONST PSC_TBL_ENTRY DramTermTblEntRC32 = {
+   {PSCFG_RTT, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (DramTermOrC32RDIMM) / sizeof (PSCFG_RTT_ENTRY),
+   (VOID *)&DramTermOrC32RDIMM
+};
+
+// POR Max Freq.
+// Format :
+// DimmPerCh,   Dimms,   SR,   DR,   QR,   Speed1_5V,   Speed1_35V,   Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA MaxFreqOrC32RDIMM[] = {
+  {{1, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{1, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{1, 1, 0, 0, 1, DDR1333_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 1, 0, 0, 1, DDR1333_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 2, 2, 0, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 2, 1, 1, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 2, 1, 0, 1, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{2, 2, 0, 2, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 2, 0, 1, 1, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{2, 2, 0, 0, 2, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{3, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 1, 0, 0, 1, DDR1066_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{3, 2, 2, 0, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 2, 1, 1, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 2, 1, 0, 1, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{3, 2, 0, 2, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 2, 0, 1, 1, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{3, 3, 3, 0, 0, DDR1066_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{3, 3, 2, 1, 0, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR667_FREQUENCY}},
+  {{3, 3, 2, 0, 1, DDR667_FREQUENCY, DDR667_FREQUENCY, DDR667_FREQUENCY}},
+  {{3, 3, 1, 2, 0, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR667_FREQUENCY}},
+  {{3, 3, 1, 1, 1, DDR667_FREQUENCY, DDR667_FREQUENCY, DDR667_FREQUENCY}},
+  {{3, 3, 0, 3, 0, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR667_FREQUENCY}},
+  {{3, 3, 0, 2, 1, DDR667_FREQUENCY, DDR667_FREQUENCY, DDR667_FREQUENCY}}
+};
+CONST PSC_TBL_ENTRY MaxFreqTblEntRC32 = {
+   {PSCFG_MAXFREQ, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (MaxFreqOrC32RDIMM) / sizeof (PSCFG_MAXFREQ_ENTRY),
+   (VOID *)&MaxFreqOrC32RDIMM
+};
+
+// RC2[IBT]
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   Dimm,   NumOfReg,   IBT
+//
+STATIC CONST PSCFG_MR2IBT_ENTRY OrRDdr3RC2IBT[] = {
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, 1, 1},
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, 1, 1},
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, 0xF, 1},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, 1, 0},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, 1, 0},
+  {1, DDR1066, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, 1, 0},
+  {1, DDR1066, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, 2, 1},
+  {1, DDR1333, V1_5, DIMM_QR, NP, NP, DIMM_QR, 1, 0},
+  {1, DDR1333, V1_5, DIMM_QR, NP, NP, DIMM_QR, 2, 1},
+  {1, DDR1600, V1_5, DIMM_SR, NP, NP, DIMM_SR, 1, 0},
+  {1, DDR1600, V1_5, DIMM_DR, NP, NP, DIMM_DR, 1, 0},
+  {1, DDR1333, V1_35, DIMM_QR, NP, NP, DIMM_QR, 1, 0},
+  {1, DDR1333, V1_35, DIMM_QR, NP, NP, DIMM_QR, 2, 1},
+  {1, DDR1600, V1_35, DIMM_SR, NP, NP, DIMM_SR, 1, 0},
+  {1, DDR1600, V1_35, DIMM_DR, NP, NP, DIMM_DR, 1, 0},
+  {1, DDR1866, V1_5, DIMM_SR, NP, NP, DIMM_SR, 1, 0},
+  {1, DDR1866, V1_5, DIMM_DR, NP, NP, DIMM_DR, 1, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP + DIMM_SR, DIMM_SR, NP, DIMM_SR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, NP + DIMM_DR, DIMM_DR, NP, DIMM_DR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, 0xF, 1},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, DIMM_DR, NP, DIMM_SR + DIMM_DR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_SR, DIMM_QR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, DIMM_SR, NP, DIMM_SR + DIMM_DR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_DR, DIMM_QR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_SR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_DR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_QR, NP, DIMM_QR, 1, 1},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_SR, NP, DIMM_SR, 1, 0},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_DR, NP, DIMM_DR, 1, 0},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, 1, 0},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, 2, 1},
+  {2, DDR1066, VOLT_ALL, DIMM_SR, DIMM_SR, NP, DIMM_SR, 1, 1},
+  {2, DDR1066, VOLT_ALL, DIMM_DR, DIMM_DR, NP, DIMM_DR, 1, 1},
+  {2, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, 1, 0},
+  {2, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, 2, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_SR, NP, DIMM_SR, 1, 1},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, DIMM_SR, 1, 0},
+  {2, DDR1600, V1_5, NP, DIMM_DR, NP, DIMM_DR, 1, 0},
+  {2, DDR1066, V1_5, DIMM_SR, DIMM_QR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR1066, V1_5, DIMM_DR, DIMM_QR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_DR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_QR, NP, DIMM_QR, 1, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, DIMM_SR + DIMM_DR, 1, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR, NP, DIMM_SR + DIMM_DR, 1, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_DR, NP, DIMM_DR, 1, 1},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, DIMM_QR, 1, 0},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, DIMM_QR, 2, 1},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, DIMM_SR, 1, 1},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, 0xF, 1},
+  {3, DDR667, VOLT_ALL, NP + DIMM_SR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_QR, 1, 1},
+  {3, DDR667, VOLT_ALL, NP + DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, 2, 8},
+  {3, DDR667, VOLT_ALL, NP + DIMM_DR, DIMM_QR, DIMM_DR, DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR667 + DDR800, VOLT_ALL, DIMM_SR, NP + DIMM_SR, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_SR, NP + DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_SR, DIMM_QR, DIMM_DR, DIMM_SR + DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_DR, NP + DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_DR, NP + DIMM_DR, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_DR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, NP, NP, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_QR, 1, 1},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, 2, 8},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, DIMM_DR, DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, NP + DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, NP + DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, NP + DIMM_DR, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, NP + DIMM_DR, NP, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, 1, 0},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, 1, 0},
+  {3, DDR1066, V1_5, NP, DIMM_QR, NP, DIMM_QR, 1, 0},
+  {3, DDR1066, V1_5, NP, DIMM_QR, NP, DIMM_QR, 2, 1},
+  {3, DDR1066, V1_5, DIMM_SR, NP + DIMM_SR, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR1066, V1_35 + V1_25, DIMM_SR, NP, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR, DIMM_SR, 1, 0},
+  {3, DDR1600, V1_5, NP, NP, DIMM_DR, DIMM_DR, 1, 0},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, 2, 8},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_QR, DIMM_DR, DIMM_SR + DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_QR, DIMM_DR, DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR1066, V1_5, NP, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_QR, 1, 1},
+  {3, DDR1066, V1_5, NP, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, 2, 8},
+  {3, DDR1066, V1_5, NP, DIMM_QR, DIMM_DR, DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR1066, V1_35, NP, DIMM_QR, NP, DIMM_QR, 1, 0},
+  {3, DDR1066, V1_35, NP, DIMM_QR, NP, DIMM_QR, 2, 1},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_SR, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_SR, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR1333, V1_25, DIMM_SR, NP, DIMM_SR, DIMM_SR, 1, 1},
+};
+CONST PSC_TBL_ENTRY RC2IBTTblEntRC32 = {
+   {PSCFG_RC2IBT, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (OrRDdr3RC2IBT) / sizeof (PSCFG_MR2IBT_ENTRY),
+   (VOID *)&OrRDdr3RC2IBT
+};
+
+// RC10[OperatingSpeed]
+// Format :
+// DDRrate,   Operating Speed
+//
+STATIC CONST PSCFG_OPSPD_ENTRY OrRDdr3OpSPD[] = {
+  {DDR667 + DDR800, 0},
+  {DDR1066, 1},
+  {DDR1333, 2},
+  {DDR1600, 3}
+};
+CONST PSC_TBL_ENTRY RC10OpSpdTblEntRC32 = {
+   {PSCFG_RC10OPSPD, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (OrRDdr3OpSPD) / sizeof (PSCFG_OPSPD_ENTRY),
+   (VOID *)&OrRDdr3OpSPD
+};
+
+//
+// MemClkDis
+//
+STATIC CONST UINT8 ROMDATA Or3RDdr3CLKDis[] = {0x03, 0x0C, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00};
+CONST PSC_TBL_ENTRY ClkDisMapEntRC32 = {
+   {PSCFG_CLKDIS, RDIMM_TYPE, _1DIMM + _2DIMM + _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or3RDdr3CLKDis) / sizeof (UINT8),
+   (VOID *)&Or3RDdr3CLKDis
+};
+
+//
+// WL pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA WLPas1SeedOrC32RDIMM[] = {
+  {_1DIMM + _2DIMM + _3DIMM, CH_ALL, 0x3E}
+};
+CONST PSC_TBL_ENTRY WLPass1SeedEntRC32 = {
+   {PSCFG_WL_PASS1_SEED, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (WLPas1SeedOrC32RDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&WLPas1SeedOrC32RDIMM
+};
+
+//
+// HW RxEn pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA HWRxEnPas1SeedOrC32RDIMM[] = {
+  {_1DIMM + _2DIMM, CH_A, 0x3F},
+  {_1DIMM + _2DIMM, CH_B, 0x3E},
+  {_3DIMM, CH_A, 0x47},
+  {_3DIMM, CH_B, 0x38}
+};
+CONST PSC_TBL_ENTRY HWRxEnPass1SeedEntRC32 = {
+   {PSCFG_HWRXEN_PASS1_SEED, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (HWRxEnPas1SeedOrC32RDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&HWRxEnPas1SeedOrC32RDIMM
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/C32/mpUorC3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/C32/mpUorC3.c
new file mode 100644
index 0000000000..89d6da71d5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/C32/mpUorC3.c
@@ -0,0 +1,343 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpUorC3.c
+ *
+ * Platform specific settings for OR C32 DDR3 U-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/OR/C32)
+ * @e \$Revision: 55134 $ @e \$Date: 2011-06-16 15:27:02 -0600 (Thu, 16 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_OR_C32_MPUORC3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+// Slow mode, Address timing and Output drive compensation
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   SlowMode,   AddTmgCtl,  ODC
+//
+STATIC CONST PSCFG_SAO_ENTRY OrC32UDdr3SAO[] = {
+  {1, DDR667, VOLT_ALL, DIMM_SR, NP, NP, 0, 0x00000000, 0x00112222},
+  {1, DDR667, VOLT_ALL, DIMM_DR, NP, NP, 0, 0x003B0000, 0x00112222},
+  {1, DDR800, VOLT_ALL, DIMM_SR, NP, NP, 0, 0x00000000, 0x10112222},
+  {1, DDR800, VOLT_ALL, DIMM_DR, NP, NP, 0, 0x003B0000, 0x10112222},
+  {1, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00383837, 0x20112222},
+  {1, DDR1333, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00363635, 0x30112222},
+  {1, DDR1600, V1_5, DIMM_SR, NP, NP, 0, 0x00353533, 0x30112222},
+  {1, DDR1600, V1_5, DIMM_DR, NP, NP, 1, 0x00003533, 0x30112222},
+  {1, DDR1600, V1_35, DIMM_SR, NP, NP, 0, 0x00353533, 0x30112222},
+  {1, DDR1600, V1_35, DIMM_DR, NP, NP, 1, 0x00003533, 0x30112222},
+  {1, DDR1866, V1_5, DIMM_SR, NP, NP, 0, 0x00333330, 0x30332222},
+  {1, DDR1866, V1_5, DIMM_DR, NP, NP, 1, 0x00003330, 0x30332222},
+  {2, DDR667, VOLT_ALL, NP, DIMM_SR, NP, 0, 0x00000000, 0x00112222},
+  {2, DDR667, VOLT_ALL, NP, DIMM_DR, NP, 0, 0x003B0000, 0x00112222},
+  {2, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00390039, 0x10222222},
+  {2, DDR800, VOLT_ALL, NP, DIMM_SR, NP, 0, 0x00000000, 0x10112222},
+  {2, DDR800, VOLT_ALL, NP, DIMM_DR, NP, 0, 0x003B0000, 0x10112222},
+  {2, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00390039, 0x20222222},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00383837, 0x20112222},
+  {2, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x003A3A3A, 0x30222222},
+  {2, DDR1333, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00363635, 0x30112222},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_SR, NP, 1, 0x00003939, 0x30222222},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, 0, 0x00353533, 0x30112222},
+  {2, DDR1600, V1_5, NP, DIMM_DR, NP, 1, 0x00003533, 0x30112222},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, 1, 0x00003938, 0x30222222},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00003938, 0x30222222},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, 1, 0x00003939, 0x30222222},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_SR, 0, 0x00000000, 0x00332222},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_DR, 0, 0x003B0000, 0x00332222},
+  {3, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x00390039, 0x10222222},
+  {3, DDR800, VOLT_ALL, NP, NP, DIMM_SR, 0, 0x00000000, 0x10332222},
+  {3, DDR800, VOLT_ALL, NP, NP, DIMM_DR, 0, 0x003B0000, 0x10332222},
+  {3, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x00390039, 0x20222222},
+  {3, DDR1066, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00383837, 0x20332222},
+  {3, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x003A3A3A, 0x30222222},
+  {3, DDR1333, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00363635, 0x30332222},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_SR, 1, 0x00003939, 0x30222222},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR, 0, 0x00353533, 0x30332222},
+  {3, DDR1600, V1_5, NP, NP, DIMM_DR, 1, 0x00003533, 0x30332222},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, 1, 0x00003938, 0x30222222},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR + DIMM_DR, 1, 0x00003938, 0x30222222},
+  {3, DDR1333, V1_25, DIMM_SR, NP, DIMM_SR, 1, 0x00003939, 0x30222222},
+};
+CONST PSC_TBL_ENTRY SAOTblEntUC32 = {
+   {PSCFG_SAO, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (OrC32UDdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+   (VOID *)&OrC32UDdr3SAO
+};
+// training configuratrions
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   2D
+//
+STATIC CONST PSCFG_S___ENTRY OrC32UDdr3S__[] = {
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {1, DDR667 + DDR800 + DDR1066 + DDR1333, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 1},
+  {1, DDR1600, V1_5, DIMM_SR + DIMM_DR, NP, NP, 1},
+  {1, DDR1600, V1_35, DIMM_SR + DIMM_DR, NP, NP, 1},
+  {1, DDR1866, V1_5, DIMM_SR + DIMM_DR, NP, NP, 1},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, NP + DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1},
+  {2, DDR1333, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_SR, NP, 1},
+  {2, DDR1600, V1_5, NP, DIMM_SR + DIMM_DR, NP, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR + DIMM_DR, NP, 1},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, 1},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, NP + DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_SR, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, V1_25, DIMM_SR, NP, DIMM_SR, 1},  };
+CONST PSC_TBL_ENTRY S__TblEntUC32 = {
+   {PSCFG_S__, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (OrC32UDdr3S__) / sizeof (PSCFG_S___ENTRY),
+   (VOID *)&OrC32UDdr3S__
+};
+// ODT pattern for 1 DPC
+// Format:
+//  Dimm0,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_1D_ODTPAT_ENTRY Or1UDdr3OdtPat[] = {
+  {DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00000001},
+  {DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x00000401}
+};
+CONST PSC_TBL_ENTRY OdtPat1DTblEntUC32 = {
+   {PSCFG_ODT_PAT_1D, UDIMM_TYPE, _1DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or1UDdr3OdtPat) / sizeof (PSCFG_1D_ODTPAT_ENTRY),
+   (VOID *)&Or1UDdr3OdtPat
+};
+
+// ODT pattern for 2 DPC
+// Format:
+//  Dimm0,   Dimm1,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG____ODTPAT_ENTRY Or2UDdr3OdtPat[] = {
+  {NP, DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00020000},
+  {NP, DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x08020000},
+  {DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0x00000000, 0x01010202, 0x00000000, 0x09030603}
+};
+CONST PSC_TBL_ENTRY OdtPat2DTblEntUC32 = {
+   {PSCFG_ODT_PAT___, UDIMM_TYPE, _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or2UDdr3OdtPat) / sizeof (PSCFG____ODTPAT_ENTRY),
+   (VOID *)&Or2UDdr3OdtPat
+};
+
+// ODT pattern for 3 DPC
+// Format:
+//  Dimm0,   Dimm1,   Dimm2,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_3D_ODTPAT_ENTRY Or3UDdr3OdtPat[] = {
+  {NP, NP, DIMM_SR + DIMM_DR, 0x00000000, 0x00000000, 0x00000004, 0x00000000},
+  {DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0x00000101, 0x00000404, 0x00000105, 0x00000405}
+};
+CONST PSC_TBL_ENTRY OdtPat3DTblEntUC32 = {
+   {PSCFG_ODT_PAT_3D, UDIMM_TYPE, _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or3UDdr3OdtPat) / sizeof (PSCFG_3D_ODTPAT_ENTRY),
+   (VOID *)&Or3UDdr3OdtPat
+};
+
+// Dram Term and Dynamic Dram Term
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   Dimm,   Rank,   RttNom,    RttWr
+//
+STATIC CONST PSCFG_RTT_ENTRY DramTermOrC32UDIMM[] = {
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, R0, 2, 0},
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 2, 0},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, R0, 1, 0},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 1, 0},
+  {1, DDR1600, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1600, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {1, DDR1600, V1_35, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1600, V1_35, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {1, DDR1866, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1866, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_SR, NP, DIMM_SR, R0, 2, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 2, 0},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, DIMM_SR + DIMM_DR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_SR, NP, DIMM_SR, R0, 1, 0},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 1, 0},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 3, 0},
+  {2, DDR1600, V1_5, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 0},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 3, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_DR, DIMM_DR, R0, 3, 2},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 1},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_25, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 5, 2},
+};
+CONST PSC_TBL_ENTRY DramTermTblEntUC32 = {
+   {PSCFG_RTT, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (DramTermOrC32UDIMM) / sizeof (PSCFG_RTT_ENTRY),
+   (VOID *)&DramTermOrC32UDIMM
+};
+
+// Max Freq.
+// Format :
+// DimmPerCh,   Dimms,   SR,   DR,   QR,   Speed1_5V,   Speed1_35V,   Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA MaxFreqOrC32UDIMM[] = {
+  {{1, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{1, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 2, 2, 0, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 2, 1, 1, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 2, 0, 2, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 2, 2, 0, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 2, 1, 1, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 2, 0, 2, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}}
+};
+CONST PSC_TBL_ENTRY MaxFreqTblEntUC32 = {
+   {PSCFG_MAXFREQ, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (MaxFreqOrC32UDIMM) / sizeof (PSCFG_MAXFREQ_ENTRY),
+   (VOID *)&MaxFreqOrC32UDIMM
+};
+
+//
+// MemClkDis [1DPC & 2DPC]
+//
+STATIC CONST UINT8 ROMDATA OrUDdr3CLKDis[] = {0x01, 0x04, 0x02, 0x08, 0x00, 0x00, 0x00, 0x00};
+CONST PSC_TBL_ENTRY ClkDisMapEntUC32 = {
+   {PSCFG_CLKDIS, UDIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (OrUDdr3CLKDis) / sizeof (UINT8),
+   (VOID *)&OrUDdr3CLKDis
+};
+
+//
+// MemClkDis [3DPC]
+//
+STATIC CONST UINT8 ROMDATA Or3UDdr3CLKDis[] = {0x01, 0x02, 0x10, 0x20, 0x00, 0x00, 0x00, 0x00};
+CONST PSC_TBL_ENTRY ClkDisMap3DEntUC32 = {
+   {PSCFG_CLKDIS, UDIMM_TYPE, _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (Or3UDdr3CLKDis) / sizeof (UINT8),
+   (VOID *)&Or3UDdr3CLKDis
+};
+
+//
+// WL pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA WLPas1SeedOrC32UDIMM[] = {
+  {_1DIMM + _2DIMM + _3DIMM, CH_ALL, 0x12}
+};
+CONST PSC_TBL_ENTRY WLPass1SeedEntUC32 = {
+   {PSCFG_WL_PASS1_SEED, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (WLPas1SeedOrC32UDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&WLPas1SeedOrC32UDIMM
+};
+
+//
+// HW RxEn pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA HWRxEnPas1SeedOrC32UDIMM[] = {
+  {_1DIMM + _2DIMM, CH_A, 0x39},
+  {_1DIMM + _2DIMM, CH_B, 0x32},
+  {_3DIMM, CH_A, 0x45},
+  {_3DIMM, CH_B, 0x37}
+};
+CONST PSC_TBL_ENTRY HWRxEnPass1SeedEntUC32 = {
+   {PSCFG_HWRXEN_PASS1_SEED, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_C32, DDR3_TECHNOLOGY},
+   sizeof (HWRxEnPas1SeedOrC32UDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&HWRxEnPas1SeedOrC32UDIMM
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/G34/mpLorG3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/G34/mpLorG3.c
new file mode 100644
index 0000000000..3b26f68407
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/G34/mpLorG3.c
@@ -0,0 +1,336 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpLorG3.c
+ *
+ * Platform specific settings for OR G34 DDR3 LRDIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/OR/G34)
+ * @e \$Revision: 58717 $ @e \$Date: 2011-09-05 23:20:11 -0600 (Mon, 05 Sep 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "GeneralServices.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_PS_OR_G34_MPLORG3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+// Slow mode, Address timing and Output drive compensation
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   SlowMode,   AddTmgCtl,   ODC
+//
+STATIC CONST PSCFG_SAO_ENTRY OrG34LRDdr3SAO[] = {
+  {1, DDR667, VOLT_ALL, DIMM_LR, NP, NP, 0, 0x00000000, 0x00112222},
+  {1, DDR800, VOLT_ALL, DIMM_LR, NP, NP, 0, 0x00000000, 0x10112222},
+  {1, DDR1066, VOLT_ALL, DIMM_LR, NP, NP, 0, 0x003C3C3C, 0x20112222},
+  {1, DDR1333, VOLT_ALL, DIMM_LR, NP, NP, 0, 0x003A3A3A, 0x30112222},
+  {1, DDR1600, V1_5, DIMM_LR, NP, NP, 0, 0x00393939, 0x30112222},
+  {1, DDR1866, V1_5, DIMM_LR, NP, NP, 0, 0x00393939, 0x30332222},
+  {1, DDR1600, V1_35, DIMM_LR, NP, NP, 0, 0x00393939, 0x30112222},
+  {2, DDR667, VOLT_ALL, NP, DIMM_LR, NP, 0, 0x00000000, 0x00112222},
+  {2, DDR667, VOLT_ALL, DIMM_LR, DIMM_LR, NP, 0, 0x00000000, 0x10222222},
+  {2, DDR800, VOLT_ALL, NP, DIMM_LR, NP, 0, 0x00000000, 0x10112222},
+  {2, DDR800, VOLT_ALL, DIMM_LR, DIMM_LR, NP, 0, 0x00000000, 0x20222222},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_LR, NP, 0, 0x00393C39, 0x20112222},
+  {2, DDR1066, VOLT_ALL, DIMM_LR, DIMM_LR, NP, 0, 0x003A3C3A, 0x30222222},
+  {2, DDR1333, VOLT_ALL, NP, DIMM_LR, NP, 0, 0x00373A37, 0x30112222},
+  {2, DDR1333, V1_5 + V1_35, DIMM_LR, DIMM_LR, NP, 0, 0x00383A38, 0x30222222},
+  {2, DDR1600, V1_5, NP, DIMM_LR, NP, 0, 0x00363936, 0x30112222},
+  {2, DDR1600, V1_5, DIMM_LR, DIMM_LR, NP, 0, 0x00353935, 0x30222222},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_LR, 0, 0x00000000, 0x00332222},
+  {3, DDR667, VOLT_ALL, DIMM_LR, NP, DIMM_LR, 0, 0x00000000, 0x20222222},
+  {3, DDR667, VOLT_ALL, DIMM_LR, DIMM_LR, DIMM_LR, 0, 0x00380038, 0x30112222},
+  {3, DDR800, VOLT_ALL, NP, NP, DIMM_LR, 0, 0x00390039, 0x10332222},
+  {3, DDR800, VOLT_ALL, DIMM_LR, NP, DIMM_LR, 0, 0x003A003A, 0x30222222},
+  {3, DDR800, V1_5 + V1_35, DIMM_LR, DIMM_LR, DIMM_LR, 0, 0x00360036, 0x30112222},
+  {3, DDR1066, VOLT_ALL, NP, NP, DIMM_LR, 0, 0x00373C37, 0x20332222},
+  {3, DDR1066, VOLT_ALL, DIMM_LR, NP, DIMM_LR, 0, 0x00383C38, 0x30222222},
+  {3, DDR1066, V1_5, DIMM_LR, DIMM_LR, DIMM_LR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1333, VOLT_ALL, NP, NP, DIMM_LR, 0, 0x00353A35, 0x30332222},
+  {3, DDR1333, V1_5 + V1_35, DIMM_LR, NP, DIMM_LR, 0, 0x00363A36, 0x30222222},
+  {3, DDR1600, V1_5, NP, NP, DIMM_LR, 0, 0x00333933, 0x30332222},
+  {3, DDR800, V1_25, DIMM_LR, DIMM_LR, DIMM_LR, 0, 0x00360036, 0x30112222},
+  {3, DDR1066, V1_35, DIMM_LR, DIMM_LR, DIMM_LR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1333, V1_5, DIMM_LR, DIMM_LR, DIMM_LR, 0, 0x00303A30, 0x30112222},
+  {3, DDR1600, V1_5, DIMM_LR, NP, DIMM_LR, 0, 0x00343934, 0x30222222},
+};
+CONST PSC_TBL_ENTRY SAOTblEntLRG34 = {
+   {PSCFG_SAO, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (OrG34LRDdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+   (VOID *)&OrG34LRDdr3SAO
+};
+// training configuratrions
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   2D
+//
+STATIC CONST PSCFG_S___ENTRY OrG34LRDdr3S__[] = {
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {1, DDR667 + DDR800 + DDR1066 + DDR1333, VOLT_ALL, DIMM_LR, NP, NP, 0},
+  {1, DDR1600, V1_5 + V1_35, DIMM_LR, NP, NP, 0},
+  {1, DDR1866, V1_5, DIMM_LR, NP, NP, 0},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, NP + DIMM_LR, DIMM_LR, NP, 0},
+  {2, DDR1333, V1_5 + V1_35, NP + DIMM_LR, DIMM_LR, NP, 0},
+  {2, DDR1333, V1_25, NP, DIMM_LR, NP, 0},
+  {2, DDR1600, V1_5, NP, DIMM_LR, NP, 0},
+  {2, DDR1600, V1_5, DIMM_LR, DIMM_LR, NP, 0},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_LR, 1},
+  {3, DDR667, VOLT_ALL, DIMM_LR, NP + DIMM_LR, DIMM_LR, 1},
+  {3, DDR800, V1_5 + V1_35, NP, NP, DIMM_LR, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_LR, NP + DIMM_LR, DIMM_LR, 1},
+  {3, DDR800, V1_25, NP + DIMM_LR, NP, DIMM_LR, 1},
+  {3, DDR1066 + DDR1600, V1_5, NP, NP, DIMM_LR, 1},
+  {3, DDR1066, V1_5, DIMM_LR, NP + DIMM_LR, DIMM_LR, 1},
+  {3, DDR1066, V1_35 + V1_25, NP + DIMM_LR, NP, DIMM_LR, 1},
+  {3, DDR1333, V1_5 + V1_35, NP + DIMM_LR, NP, DIMM_LR, 1},
+  {3, DDR1333, V1_25, NP, NP, DIMM_LR, 1},
+  {3, DDR800, V1_25, DIMM_LR, DIMM_LR, DIMM_LR, 1},
+  {3, DDR1066, V1_35, DIMM_LR, DIMM_LR, DIMM_LR, 1},
+  {3, DDR1333, V1_5, DIMM_LR, DIMM_LR, DIMM_LR, 1},
+  {3, DDR1600, V1_5, DIMM_LR, NP, DIMM_LR, 1},
+  };
+CONST PSC_TBL_ENTRY S__TblEntLRG34 = {
+   {PSCFG_S__, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (OrG34LRDdr3S__) / sizeof (PSCFG_S___ENTRY),
+   (VOID *)&OrG34LRDdr3S__
+};
+// ODT pattern for 1 DPC
+// Format:
+//  Dimm0,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_1D_ODTPAT_ENTRY Or1LRDdr3OdtPat[] = {
+  {DIMM_LR, 0x00000000, 0x00000000, 0x00000101, 0x00000101}
+};
+CONST PSC_TBL_ENTRY OdtPat1DTblEntLRG34 = {
+   {PSCFG_ODT_PAT_1D, LRDIMM_TYPE, _1DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (Or1LRDdr3OdtPat) / sizeof (PSCFG_1D_ODTPAT_ENTRY),
+   (VOID *)&Or1LRDdr3OdtPat
+};
+
+// ODT pattern for 2 DPC
+// Format:
+//  Dimm0,   Dimm1,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG____ODTPAT_ENTRY Or2LRDdr3OdtPat[] = {
+  {NP, DIMM_LR, 0x00000000, 0x00000000, 0x02020000, 0x02020000},
+  {DIMM_LR, DIMM_LR, 0x01010202, 0x01010202, 0x03030303, 0x03030303}
+};
+CONST PSC_TBL_ENTRY OdtPat2DTblEntLRG34 = {
+   {PSCFG_ODT_PAT___, LRDIMM_TYPE, _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (Or2LRDdr3OdtPat) / sizeof (PSCFG____ODTPAT_ENTRY),
+   (VOID *)&Or2LRDdr3OdtPat
+};
+
+// ODT pattern for 3 DPC
+// Format:
+//  Dimm0,   Dimm1,   Dimm2,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_3D_ODTPAT_ENTRY Or3LRDdr3OdtPat[] = {
+  {NP, NP, DIMM_LR, 0x00000000, 0x00000000, 0x00000404, 0x00000000},
+  {DIMM_LR, NP, DIMM_LR, 0x00000101, 0x00000404, 0x00000505, 0x00000505},
+  {DIMM_LR, DIMM_LR, DIMM_LR, 0x00000303, 0x05050606, 0x00000707, 0x07070707}
+};
+CONST PSC_TBL_ENTRY OdtPat3DTblEntLRG34 = {
+   {PSCFG_ODT_PAT_3D, LRDIMM_TYPE, _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (Or3LRDdr3OdtPat) / sizeof (PSCFG_3D_ODTPAT_ENTRY),
+   (VOID *)&Or3LRDdr3OdtPat
+};
+
+// Dram Term and Dynamic Dram Term
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,  RttNom,   RttWr
+//
+STATIC CONST PSCFG_LR_RTT_ENTRY DramTermOrG34LRDIMM[] = {
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_LR, NP, NP, 2, 0},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_LR, NP, NP, 1, 0},
+  {1, DDR1600 + DDR1866, V1_5, DIMM_LR, NP, NP, 3, 0},
+  {1, DDR1600, V1_35, DIMM_LR, NP, NP, 3, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_LR, NP, 2, 0},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_LR, DIMM_LR, NP, 3, 2},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_LR, NP, 1, 0},
+  {2, DDR1333, V1_5 + V1_35, DIMM_LR, DIMM_LR, NP, 5, 2},
+  {2, DDR1600, V1_5, NP, DIMM_LR, NP, 3, 0},
+  {2, DDR1600, V1_5, DIMM_LR, DIMM_LR, NP, 5, 1},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_LR, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_LR, NP + DIMM_LR, DIMM_LR, 3, 2},
+  {3, DDR800 + DDR1066, VOLT_ALL, DIMM_LR, NP, DIMM_LR, 3, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_LR, DIMM_LR, DIMM_LR, 5, 2},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_LR, 0, 1},
+  {3, DDR1066, V1_5, DIMM_LR, DIMM_LR, DIMM_LR, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_LR, NP, DIMM_LR, 5, 2},
+  {3, DDR1600, V1_5, NP, NP, DIMM_LR, 0, 1},
+  {3, DDR800, V1_25, DIMM_LR, DIMM_LR, DIMM_LR, 5, 2},
+  {3, DDR1066, V1_35, DIMM_LR, DIMM_LR, DIMM_LR, 5, 2},
+  {3, DDR1333, V1_5, DIMM_LR, DIMM_LR, DIMM_LR, 5, 2},
+  {3, DDR1600, V1_5, DIMM_LR, NP, DIMM_LR, 5, 1},
+};
+CONST PSC_TBL_ENTRY DramTermTblEntLRG34 = {
+   {PSCFG_LR_RTT, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (DramTermOrG34LRDIMM) / sizeof (PSCFG_LR_RTT_ENTRY),
+   (VOID *)&DramTermOrG34LRDIMM
+};
+// Max Freq.
+// Format :
+// DimmPerCh,   Dimms,  LR,   Speed1_5V,   Speed1_35V,   Speed1_25V
+//
+STATIC CONST PSCFG_LR_MAXFREQ_ENTRY ROMDATA MaxFreqOrG34LRDIMM[] = {
+  {{1, 1, 1, DDR1866_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 1, 1, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 2, 2, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 1, 1, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 2, 2, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 3, 3, DDR1066_FREQUENCY, DDR800_FREQUENCY, DDR667_FREQUENCY}}
+};
+CONST PSC_TBL_ENTRY MaxFreqTblEntLRG34 = {
+   {PSCFG_LR_MAXFREQ, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (MaxFreqOrG34LRDIMM) / sizeof (PSCFG_LR_MAXFREQ_ENTRY),
+   (VOID *)&MaxFreqOrG34LRDIMM
+};
+
+// IBT
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   F0RC8,   F1RC0,   F1RC1,   F1RC2
+//
+STATIC CONST PSCFG_L_IBT_ENTRY OrLRDdr3IBT[] = {
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_LR, NP, NP, 1, 1, 1, 1},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_LR, NP, NP, 0, 0, 0, 0},
+  {1, DDR1600 + DDR1866, V1_5, DIMM_LR, NP, NP, 0, 0, 0, 0},
+  {1, DDR1600, V1_35, DIMM_LR, NP, NP, 0, 0, 0, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP + DIMM_LR, DIMM_LR, NP, 1, 1, 1, 1},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_LR, NP, 0, 0, 0, 0},
+  {2, DDR1066, VOLT_ALL, DIMM_LR, DIMM_LR, NP, 1, 1, 1, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_LR, DIMM_LR, NP, 1, 1, 1, 1},
+  {2, DDR1600, V1_5, NP, DIMM_LR, NP, 0, 0, 0, 0},
+  {2, DDR1600, V1_5, DIMM_LR, DIMM_LR, NP, 1, 1, 1, 1},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_LR, NP + DIMM_LR, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR800 + DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_LR, 0, 0, 0, 0},
+  {3, DDR800, V1_5 + V1_35, DIMM_LR, NP + DIMM_LR, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR800, V1_25, DIMM_LR, NP, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR1066, V1_5, DIMM_LR, NP + DIMM_LR, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR1066, V1_35 + V1_25, DIMM_LR, NP, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_LR, NP, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_LR, 0, 0, 0, 0},
+  {3, DDR800, V1_25, DIMM_LR, DIMM_LR, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR1066, V1_35, DIMM_LR, DIMM_LR, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR1333, V1_5, DIMM_LR, DIMM_LR, DIMM_LR, 1, 1, 1, 1},
+  {3, DDR1600, V1_5, DIMM_LR, NP, DIMM_LR, 1, 1, 1, 1},
+};
+CONST PSC_TBL_ENTRY IBTTblEntLRG34 = {
+   {PSCFG_LR_IBT, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (OrLRDdr3IBT) / sizeof (PSCFG_L_IBT_ENTRY),
+   (VOID *)&OrLRDdr3IBT
+};
+
+//
+// MemClkDis
+//
+STATIC CONST UINT8 ROMDATA Or3LRDdr3CLKDis[] = {0x03, 0x0C, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00};
+CONST PSC_TBL_ENTRY ClkDisMapEntLRG34 = {
+   {PSCFG_CLKDIS, LRDIMM_TYPE, _1DIMM + _2DIMM + _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (Or3LRDdr3CLKDis) / sizeof (UINT8),
+   (VOID *)&Or3LRDdr3CLKDis
+};
+
+//
+// WL pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA WLPas1SeedOrG34LRDIMM[] = {
+  {_1DIMM + _2DIMM + _3DIMM, CH_ALL, 0xF7}
+};
+CONST PSC_TBL_ENTRY WLPass1SeedEntLRG34 = {
+   {PSCFG_WL_PASS1_SEED, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (WLPas1SeedOrG34LRDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&WLPas1SeedOrG34LRDIMM
+};
+
+//
+// HW RxEn pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA HWRxEnPas1SeedOrG34LRDIMM[] = {
+  {_1DIMM + _2DIMM + _3DIMM, CH_A, 0x132},
+  {_1DIMM + _2DIMM + _3DIMM, CH_B, 0x122},
+  {_1DIMM + _2DIMM + _3DIMM, CH_C, 0x112},
+  {_1DIMM + _2DIMM + _3DIMM, CH_D, 0x102}
+};
+CONST PSC_TBL_ENTRY HWRxEnPass1SeedEntLRG34 = {
+   {PSCFG_HWRXEN_PASS1_SEED, LRDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (HWRxEnPas1SeedOrG34LRDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&HWRxEnPas1SeedOrG34LRDIMM
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/G34/mpRorG3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/G34/mpRorG3.c
new file mode 100644
index 0000000000..fb34f6f17f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/G34/mpRorG3.c
@@ -0,0 +1,743 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpRorG3.c
+ *
+ * Platform specific settings for OR G34 DDR3 R-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/OR/G34)
+ * @e \$Revision: 58716 $ @e \$Date: 2011-09-05 23:18:21 -0600 (Mon, 05 Sep 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "GeneralServices.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+
+#define FILECODE PROC_MEM_PS_OR_G34_MPRORG3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+// Slow mode, Address timing and Output drive compensation
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   SlowMode,   AddTmgCtl,   ODC
+//
+STATIC CONST PSCFG_SAO_ENTRY OrG34RDdr3SAO[] = {
+  {1, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00000000, 0x00112222},
+  {1, DDR667, VOLT_ALL, DIMM_QR, NP, NP, 0, 0x00000000, 0x00222222},
+  {1, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00000000, 0x10112222},
+  {1, DDR800, VOLT_ALL, DIMM_QR, NP, NP, 0, 0x00000000, 0x10222222},
+  {1, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x003C3C3C, 0x20112222},
+  {1, DDR1066, VOLT_ALL, DIMM_QR, NP, NP, 0, 0x003C3C3C, 0x30222222},
+  {1, DDR1333, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x003A3A3A, 0x30112222},
+  {1, DDR1333, V1_5 + V1_35, DIMM_QR, NP, NP, 0, 0x003A3A3A, 0x30222222},
+  {1, DDR1600, V1_5 + V1_35, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00393939, 0x30112222},
+  {1, DDR1866, V1_5, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00393939, 0x30332222},
+  {2, DDR667, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00000000, 0x00112222},
+  {2, DDR667, VOLT_ALL, NP, DIMM_QR, NP, 0, 0x00000000, 0x00222222},
+  {2, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0, 0x00000000, 0x10222222},
+  {2, DDR800, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00000000, 0x10112222},
+  {2, DDR800, VOLT_ALL, NP, DIMM_QR, NP, 0, 0x00000000, 0x10222222},
+  {2, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0, 0x00000000, 0x20222222},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00393C39, 0x20112222},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_QR, NP, 0, 0x00393C39, 0x20222222},
+  {2, DDR1066, V1_5, DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0, 0x003A3C3A, 0x30222222},
+  {2, DDR1066, V1_35 + V1_25, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x003A3C3A, 0x30222222},
+  {2, DDR1333, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00373A37, 0x30112222},
+  {2, DDR1333, V1_5, NP, DIMM_QR, NP, 0, 0x00373A37, 0x30222222},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00383A38, 0x30222222},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, 0, 0x00383A38, 0x30222222},
+  {2, DDR1600, V1_5, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00363936, 0x30112222},
+  {2, DDR1600, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00353935, 0x30222222},
+  {2, DDR1066, V1_35, DIMM_SR + DIMM_DR, DIMM_QR, NP, 0, 0x003A3C3A, 0x30222222},
+  {2, DDR1066, V1_35, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0, 0x003A3C3A, 0x30222222},
+  {2, DDR1066, V1_25, DIMM_QR, DIMM_QR, NP, 0, 0x003A3C3A, 0x30222222},
+  {2, DDR1333, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, 0, 0x00383A38, 0x30222222},
+  {2, DDR1333, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0, 0x00383A38, 0x30222222},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, 0, 0x00373A37, 0x30222222},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00000000, 0x00332222},
+  {3, DDR667, VOLT_ALL, NP, DIMM_QR, NP, 0, 0x00000000, 0x10222222},
+  {3, DDR667, VOLT_ALL, NP, DIMM_QR, DIMM_SR + DIMM_DR, 0, 0x00000000, 0x20222222},
+  {3, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x00000000, 0x10222222},
+  {3, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR, 0, 0x00380038, 0x30112222},
+  {3, DDR800, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00390039, 0x10332222},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, NP, 0, 0x00390039, 0x20222222},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, DIMM_SR + DIMM_DR, 0, 0x003A003A, 0x30222222},
+  {3, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x003A003A, 0x20222222},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR, 0, 0x00360036, 0x30112222},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_SR, 0, 0x00360036, 0x30112222},
+  {3, DDR1066, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00373C37, 0x20332222},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, NP, 0, 0x00373C37, 0x30222222},
+  {3, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x00383C38, 0x30222222},
+  {3, DDR1066, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_SR, DIMM_SR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1333, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00353A35, 0x30332222},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x00363A36, 0x30222222},
+  {3, DDR1333, V1_25, DIMM_SR, NP, DIMM_SR, 0, 0x00363A36, 0x30222222},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00333933, 0x30332222},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_DR, 0, 0x00360036, 0x30112222},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00360036, 0x30112222},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00360036, 0x30112222},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, DIMM_SR + DIMM_DR, 0, 0x00383C38, 0x30222222},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_QR, DIMM_SR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_QR, DIMM_DR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_SR, DIMM_DR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1066, V1_35, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00333C33, 0x30112222},
+  {3, DDR1333, V1_5, NP, DIMM_QR, NP, 0, 0x00353A35, 0x30222222},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_SR, DIMM_DR, 0, 0x00303A30, 0x30112222},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00303A30, 0x30112222},
+  {3, DDR1333, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0, 0x00303A30, 0x30112222},
+  {3, DDR1600, V1_5, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x00343934, 0x30222222},
+};
+CONST PSC_TBL_ENTRY SAOTblEntRG34 = {
+   {PSCFG_SAO, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (OrG34RDdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+   (VOID *)&OrG34RDdr3SAO
+};
+
+// training configuratrions
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   2D
+//
+STATIC CONST PSCFG_S___ENTRY OrG34RDdr3S__[] = {
+// DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {1, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR + DIMM_QR, NP, NP, 0},
+  {1, DDR1333, V1_5 + V1_35, DIMM_SR + DIMM_DR + DIMM_QR, NP, NP, 0},
+  {1, DDR1333, V1_25, DIMM_SR + DIMM_DR, NP, NP, 0},
+  {1, DDR1600, V1_5 + V1_35, DIMM_SR + DIMM_DR, NP, NP, 0},
+  {1, DDR1866, V1_5, DIMM_SR + DIMM_DR, NP, NP, 0},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {2, DDR667 + DDR800, VOLT_ALL, NP + DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0},
+  {2, DDR1066, V1_5, NP + DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0},
+  {2, DDR1066, V1_35 + V1_25, NP, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0},
+  {2, DDR1066, V1_35 + V1_25, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1333, V1_5, NP, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0},
+  {2, DDR1333, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1333, V1_35, NP + DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1333, V1_25, NP, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, 0},
+  {2, DDR1600, V1_5, NP, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_SR, NP, 0},
+  {2, DDR1066, V1_35, DIMM_SR + DIMM_DR, DIMM_QR, NP, 0},
+  {2, DDR1066, V1_35, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0},
+  {2, DDR1066, V1_25, DIMM_QR, DIMM_QR, NP, 0},
+  {2, DDR1333, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, 0},
+  {2, DDR1333, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, 0},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, 0},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_DR, NP, 0},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, 0},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, NP + DIMM_SR + DIMM_DR, 1},
+  {3, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, NP + DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_5 + V1_35, NP, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_5, DIMM_SR + DIMM_DR, NP + DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_35, DIMM_SR + DIMM_DR, NP + DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_25, NP + DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_SR, 1},
+  {3, DDR1066 + DDR1600, V1_5, NP, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, NP, 1},
+  {3, DDR1066, V1_5, DIMM_SR + DIMM_DR, NP + DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1066, V1_35 + V1_25, NP + DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_SR, DIMM_SR, 1},
+  {3, DDR1333, V1_5 + V1_35, NP + DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_SR, DIMM_SR, 1},
+  {3, DDR1333, V1_25, NP, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, V1_25, DIMM_SR, NP, DIMM_SR, 1},
+  {3, DDR800, V1_35, DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_DR, 1},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_QR, DIMM_SR, 1},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_QR, DIMM_DR, 1},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_SR, DIMM_DR, 1},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1066, V1_35, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, V1_5, NP, DIMM_QR, NP, 1},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_SR, DIMM_DR, 1},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1600, V1_5, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  };
+CONST PSC_TBL_ENTRY S__TblEntRG34 = {
+   {PSCFG_S__, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (OrG34RDdr3S__) / sizeof (PSCFG_S___ENTRY),
+   (VOID *)&OrG34RDdr3S__
+};
+// ODT pattern for 1 DPC
+// Format:
+//  Dimm0,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_1D_ODTPAT_ENTRY Or1RDdr3OdtPat[] = {
+  {DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00000001},
+  {DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x00000401},
+  {DIMM_QR, 0x00000000, 0x00000000, 0x00000505, 0x00000505}
+};
+CONST PSC_TBL_ENTRY OdtPat1DTblEntRG34 = {
+   {PSCFG_ODT_PAT_1D, RDIMM_TYPE, _1DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (Or1RDdr3OdtPat) / sizeof (PSCFG_1D_ODTPAT_ENTRY),
+   (VOID *)&Or1RDdr3OdtPat
+};
+
+// ODT pattern for 2 DPC
+// Format:
+//  Dimm0,   Dimm1,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG____ODTPAT_ENTRY Or2RDdr3OdtPat[] = {
+  {NP, DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00020000},
+  {NP, DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x08020000},
+  {NP, DIMM_QR, 0x00000000, 0x00000000, 0x020A0000, 0x080A0000},
+  {DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0x00000000, 0x01010202, 0x00000000, 0x09030603},
+  {DIMM_SR + DIMM_DR, DIMM_QR, 0x01010000, 0x01010A0A, 0x01090000, 0x01030E0B},
+  {DIMM_QR, DIMM_SR + DIMM_DR, 0x00000202, 0x05050202, 0x00000206, 0x0D070203},
+  {DIMM_QR, DIMM_QR, 0x05050A0A, 0x05050A0A, 0x050D0A0E, 0x05070A0B}
+};
+CONST PSC_TBL_ENTRY OdtPat2DTblEntRG34 = {
+   {PSCFG_ODT_PAT___, RDIMM_TYPE, _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (Or2RDdr3OdtPat) / sizeof (PSCFG____ODTPAT_ENTRY),
+   (VOID *)&Or2RDdr3OdtPat
+};
+
+// ODT pattern for 3 DPC
+// Format:
+//  Dimm0,   Dimm1,   Dimm2,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_3D_ODTPAT_ENTRY Or3RDdr3OdtPat[] = {
+  {NP, NP, DIMM_SR + DIMM_DR, 0x00000000, 0x00000000, 0x00000004, 0x00000000},
+  {DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0x00000101, 0x00000404, 0x00000105, 0x0000405},
+  {DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0x00000303, 0x05050606, 0x00000307, 0x0D070607},
+  {NP, DIMM_QR, NP, 0x00000000, 0x00000000, 0x020A0000, 0x080A0000},
+  {NP, DIMM_QR, DIMM_SR + DIMM_DR, 0x04040A0A, 0x04040000, 0x040C0A0E, 0x04060000},
+  {DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, 0x05050B0B, 0x05050E0E, 0x050D0B0F, 0x05070E0F}
+};
+CONST PSC_TBL_ENTRY OdtPat3DTblEntRG34 = {
+   {PSCFG_ODT_PAT_3D, RDIMM_TYPE, _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (Or3RDdr3OdtPat) / sizeof (PSCFG_3D_ODTPAT_ENTRY),
+   (VOID *)&Or3RDdr3OdtPat
+};
+
+// Dram Term and Dynamic Dram Term
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   Dimm,   Rank,   RttNom,    RttWr
+//
+STATIC CONST PSCFG_RTT_ENTRY DramTermOrG34RDIMM[] = {
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, R0, 2, 0},
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 2, 0},
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, R0 + R2, 2, 2},
+  {1, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, R1 + R3, 0, 2},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, R0, 1, 0},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 1, 0},
+  {1, DDR1066, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, R0 + R2, 1, 2},
+  {1, DDR1333, V1_5 + V1_35, DIMM_QR, NP, NP, DIMM_QR, R0 + R2, 3, 2},
+  {1, DDR1333, V1_5 + V1_35, DIMM_QR, NP, NP, DIMM_QR, R1 + R3, 0, 2},
+  {1, DDR1600, V1_5 + V1_35, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1600, V1_5 + V1_35, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {1, DDR1866, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1866, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_SR, NP, DIMM_SR, R0, 2, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 2, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 2, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, NP + DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, DIMM_SR + DIMM_DR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_SR, DIMM_QR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_DR, DIMM_QR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_SR, NP, DIMM_SR, R0, 1, 0},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 1, 0},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 2},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {2, DDR1066, V1_5, DIMM_SR, DIMM_QR, NP, DIMM_SR, R0, 5, 1},
+  {2, DDR1066, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 1},
+  {2, DDR1066, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 1},
+  {2, DDR1066, V1_5, DIMM_DR, DIMM_QR, NP, DIMM_DR, R0 + R1, 5, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR, NP, DIMM_SR, R0, 5, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 1},
+  {2, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 3, 2},
+  {2, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_SR + DIMM_DR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 3, 0},
+  {2, DDR1600, V1_5, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 0},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_SR + DIMM_DR, NP, DIMM_SR, R0, 4, 1},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 4, 1},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 4, 1},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 4, 1},
+  {2, DDR1066, V1_35, DIMM_SR, DIMM_QR, NP, DIMM_SR, R0, 5, 1},
+  {2, DDR1066, V1_35, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 1},
+  {2, DDR1066, V1_35, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 1},
+  {2, DDR1066, V1_35, DIMM_DR, DIMM_QR, NP, DIMM_DR, R0 + R1, 5, 1},
+  {2, DDR1066, V1_35, DIMM_QR, DIMM_SR, NP, DIMM_SR, R0, 5, 1},
+  {2, DDR1066, V1_35, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 1},
+  {2, DDR1066, V1_35, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 1},
+  {2, DDR1066, V1_35, DIMM_QR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 1},
+  {2, DDR1066, V1_25, DIMM_QR, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 1},
+  {2, DDR1066, V1_25, DIMM_QR, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 1},
+  {2, DDR1333, V1_5, DIMM_SR, DIMM_QR, NP, DIMM_SR, R0, 5, 1},
+  {2, DDR1333, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 1},
+  {2, DDR1333, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 1},
+  {2, DDR1333, V1_5, DIMM_DR, DIMM_QR, NP, DIMM_DR, R0 + R1, 5, 1},
+  {2, DDR1333, V1_5, DIMM_QR, DIMM_SR, NP, DIMM_SR, R0, 5, 1},
+  {2, DDR1333, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 1},
+  {2, DDR1333, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 1},
+  {2, DDR1333, V1_5, DIMM_QR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 1},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 3, 2},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 2},
+  {3, DDR667, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 2, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, NP + DIMM_SR + DIMM_DR, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR667, VOLT_ALL, NP + DIMM_SR, DIMM_QR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR667, VOLT_ALL, NP + DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R0 + R2, 1, 2},
+  {3, DDR667, VOLT_ALL, NP + DIMM_DR, DIMM_QR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, NP + DIMM_SR, DIMM_SR, DIMM_SR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, NP + DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, NP + DIMM_SR + DIMM_QR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_SR, DIMM_QR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR667, VOLT_ALL, DIMM_DR, NP + DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_DR, NP + DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667, VOLT_ALL, DIMM_DR, NP + DIMM_DR, DIMM_DR, DIMM_DR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667, VOLT_ALL, DIMM_DR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, NP + DIMM_SR + DIMM_DR, DIMM_QR, R0 + R2, 1, 2},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR800, VOLT_ALL, NP, DIMM_QR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR800 + DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 3, 2},
+  {3, DDR800 + DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, NP + DIMM_SR + DIMM_QR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_SR + DIMM_QR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_SR + DIMM_QR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R0 + R2, 1, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR800 + DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, NP + DIMM_SR + DIMM_DR + DIMM_QR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800 + DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_DR, DIMM_DR, R0, 3, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_DR + DIMM_QR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_DR + DIMM_QR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 1},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 1},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 1, 2},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR1066, V1_5, DIMM_SR, NP + DIMM_SR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_5 + V1_35, DIMM_SR, DIMM_SR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_5, DIMM_DR, NP + DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_35 + V1_25, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_35 + V1_25, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, VOLT_ALL, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 1},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, DIMM_SR, DIMM_SR, R0, 5, 1},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R0 + R2, 1, 1},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, R1 + R3, 0, 1},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, DIMM_DR, DIMM_DR, R0, 5, 1},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, DIMM_DR, DIMM_DR, R1, 0, 1},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_QR, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_QR, DIMM_SR, DIMM_QR, R0 + R2, 1, 2},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_QR, DIMM_SR, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_QR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_QR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_QR, DIMM_DR, DIMM_QR, R0 + R2, 1, 2},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_QR, DIMM_DR, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_35, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_35, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1066, V1_35, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1066, V1_35, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, R0 + R2, 3, 2},
+  {3, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, R1 + R3, 0, 2},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR1600, V1_5, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 4, 1},
+  {3, DDR1600, V1_5, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, R0, 4, 1},
+  {3, DDR1600, V1_5, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 1},
+  {3, DDR1600, V1_5, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, R0, 4, 1},
+  {3, DDR1600, V1_5, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 1},
+  {3, DDR1600, V1_5, DIMM_DR, NP, DIMM_DR, DIMM_DR, R0, 4, 1},
+};
+CONST PSC_TBL_ENTRY DramTermTblEntRG34 = {
+   {PSCFG_RTT, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (DramTermOrG34RDIMM) / sizeof (PSCFG_RTT_ENTRY),
+   (VOID *)&DramTermOrG34RDIMM
+};
+
+// Max Freq.
+// Format :
+// DimmPerCh,   Dimms,   SR,   DR,   QR,   Speed1_5V,   Speed1_35V,   Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA MaxFreqOrG34RDIMM[] = {
+  {{1, 1, 1, 0, 0, DDR1866_FREQUENCY, DDR1600_FREQUENCY, DDR1333_FREQUENCY}},
+  {{1, 1, 0, 1, 0, DDR1866_FREQUENCY, DDR1600_FREQUENCY, DDR1333_FREQUENCY}},
+  {{1, 1, 0, 0, 1, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 1, 0, 0, 1, DDR1333_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 2, 2, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 2, 1, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 2, 1, 0, 1, DDR1066_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{2, 2, 0, 2, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 2, 0, 1, 1, DDR1066_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{2, 2, 0, 0, 2, DDR1066_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{3, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 1, 0, 0, 1, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR800_FREQUENCY}},
+  {{3, 2, 2, 0, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 2, 1, 1, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 2, 1, 0, 1, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{3, 2, 0, 2, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 2, 0, 1, 1, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR800_FREQUENCY}},
+  {{3, 3, 3, 0, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR800_FREQUENCY}},
+  {{3, 3, 2, 1, 0, DDR1066_FREQUENCY, DDR800_FREQUENCY, DDR667_FREQUENCY}},
+  {{3, 3, 2, 0, 1, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR667_FREQUENCY}},
+  {{3, 3, 1, 2, 0, DDR1066_FREQUENCY, DDR800_FREQUENCY, DDR667_FREQUENCY}},
+  {{3, 3, 1, 1, 1, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR667_FREQUENCY}},
+  {{3, 3, 0, 3, 0, DDR1066_FREQUENCY, DDR800_FREQUENCY, DDR667_FREQUENCY}},
+  {{3, 3, 0, 2, 1, DDR800_FREQUENCY, DDR800_FREQUENCY, DDR667_FREQUENCY}},
+};
+CONST PSC_TBL_ENTRY MaxFreqTblEntRG34 = {
+   {PSCFG_MAXFREQ, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (MaxFreqOrG34RDIMM) / sizeof (PSCFG_MAXFREQ_ENTRY),
+   (VOID *)&MaxFreqOrG34RDIMM
+};
+
+// RC2[IBT]
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   Dimm,   NumOfReg,   IBT
+//
+STATIC CONST PSCFG_MR2IBT_ENTRY OrRDdr3RC2IBT[] = {
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, 1, 1},
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, 1, 1},
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, 0xF, 1},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, 1, 0},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, 1, 0},
+  {1, DDR1066, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, 1, 0},
+  {1, DDR1066, VOLT_ALL, DIMM_QR, NP, NP, DIMM_QR, 2, 1},
+  {1, DDR1333, V1_5 + V1_35, DIMM_QR, NP, NP, DIMM_QR, 1, 0},
+  {1, DDR1333, V1_5 + V1_35, DIMM_QR, NP, NP, DIMM_QR, 2, 1},
+  {1, DDR1600, V1_5 + V1_35, DIMM_SR, NP, NP, DIMM_SR, 1, 0},
+  {1, DDR1600, V1_5 + V1_35, DIMM_DR, NP, NP, DIMM_DR, 1, 0},
+  {1, DDR1866, V1_5, DIMM_SR, NP, NP, DIMM_SR, 1, 0},
+  {1, DDR1866, V1_5, DIMM_DR, NP, NP, DIMM_DR, 1, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP + DIMM_SR, DIMM_SR, NP, DIMM_SR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, NP + DIMM_DR, DIMM_DR, NP, DIMM_DR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, 0xF, 1},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, DIMM_DR, NP, DIMM_SR + DIMM_DR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_SR, DIMM_QR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, DIMM_SR, NP, DIMM_SR + DIMM_DR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_DR, DIMM_QR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_SR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_DR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR667 + DDR800, VOLT_ALL, DIMM_QR, DIMM_QR, NP, DIMM_QR, 1, 1},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_SR, NP, DIMM_SR, 1, 0},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_DR, NP, DIMM_DR, 1, 0},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, 1, 0},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, 2, 1},
+  {2, DDR1066 + DDR1333, VOLT_ALL, DIMM_SR, DIMM_SR, NP, DIMM_SR, 1, 1},
+  {2, DDR1066, V1_5, DIMM_SR, DIMM_QR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR1066, VOLT_ALL, DIMM_DR, DIMM_DR, NP, DIMM_DR, 1, 1},
+  {2, DDR1066, V1_5, DIMM_DR, DIMM_QR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_DR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_5, DIMM_QR, DIMM_QR, NP, DIMM_QR, 1, 1},
+  {2, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, 1, 0},
+  {2, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, 2, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, DIMM_SR + DIMM_DR, 1, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR, NP, DIMM_SR + DIMM_DR, 1, 1},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_DR, NP, DIMM_DR, 1, 1},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, DIMM_SR, 1, 0},
+  {2, DDR1600, V1_5, NP, DIMM_DR, NP, DIMM_DR, 1, 0},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_SR, NP, DIMM_SR, 1, 1},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_DR, NP, DIMM_SR + DIMM_DR, 1, 1},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR, NP, DIMM_SR + DIMM_DR, 1, 1},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_DR, NP, DIMM_DR, 1, 1},
+  {2, DDR1066, V1_35, DIMM_SR, DIMM_QR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_35, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR1066, V1_35, DIMM_DR, DIMM_QR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_35, DIMM_QR, DIMM_SR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_35, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR1066, V1_35, DIMM_QR, DIMM_DR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR1066, V1_35 + V1_25, DIMM_QR, DIMM_QR, NP, DIMM_QR, 1, 1},
+  {2, DDR1066, V1_25, DIMM_QR, DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR1333, V1_5, DIMM_SR, DIMM_QR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR1333, V1_5, DIMM_SR + DIMM_DR, DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR1333, V1_5, DIMM_DR, DIMM_QR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR1333, V1_5, DIMM_QR, DIMM_SR, NP, DIMM_SR + DIMM_QR, 1, 1},
+  {2, DDR1333, V1_5, DIMM_QR, DIMM_SR + DIMM_DR + DIMM_QR, NP, DIMM_QR, 2, 8},
+  {2, DDR1333, V1_5, DIMM_QR, DIMM_DR, NP, DIMM_DR + DIMM_QR, 1, 1},
+  {2, DDR1333, V1_5, DIMM_QR, DIMM_QR, NP, DIMM_QR, 1, 1},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, DIMM_QR, 1, 0},
+  {2, DDR1333, V1_35, NP, DIMM_QR, NP, DIMM_QR, 2, 1},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, DIMM_QR, NP, DIMM_QR, 0xF, 1},
+  {3, DDR667, VOLT_ALL, NP + DIMM_SR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_QR, 1, 1},
+  {3, DDR667, VOLT_ALL, NP + DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, 2, 8},
+  {3, DDR667, VOLT_ALL, NP + DIMM_DR, DIMM_QR, DIMM_DR, DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR667 + DDR800, VOLT_ALL, DIMM_SR, NP + DIMM_SR, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_SR, NP + DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_SR, DIMM_QR, DIMM_DR, DIMM_SR + DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_DR, NP + DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_DR, NP + DIMM_DR, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR667, VOLT_ALL, DIMM_DR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, NP, NP, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, NP + DIMM_SR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, NP + DIMM_SR + DIMM_DR, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, 2, 8},
+  {3, DDR800, V1_5 + V1_35, NP + DIMM_DR, DIMM_QR, DIMM_DR, DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, NP + DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_SR, DIMM_QR, DIMM_DR, DIMM_SR + DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, NP + DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, NP + DIMM_DR, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_5 + V1_35, DIMM_DR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_25, NP + DIMM_DR, NP, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, NP, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_25, NP, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, 2, 8},
+  {3, DDR800, V1_25, NP, DIMM_QR, DIMM_DR, DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR800, V1_25, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, 1, 0},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, 1, 0},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, NP, DIMM_QR, 1, 0},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, NP, DIMM_QR, 2, 1},
+  {3, DDR1066, V1_5 + V1_35, DIMM_SR, NP + DIMM_SR, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR1066, V1_5, DIMM_SR, NP + DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_5, DIMM_DR, NP + DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_5, DIMM_DR, NP + DIMM_DR, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_35 + V1_25, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_35 + V1_25, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_35 + V1_25, DIMM_DR, NP, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR1066, V1_25, DIMM_SR, NP, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR1333, VOLT_ALL, DIMM_SR, NP, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR, DIMM_SR, 1, 0},
+  {3, DDR1600, V1_5, NP, NP, DIMM_DR, DIMM_DR, 1, 0},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR800, V1_25, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR1066, V1_5, NP + DIMM_SR, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_QR, 1, 1},
+  {3, DDR1066, V1_5 + V1_35, NP, DIMM_QR, DIMM_SR + DIMM_DR, DIMM_QR, 2, 8},
+  {3, DDR1066, V1_5, NP + DIMM_DR, DIMM_QR, DIMM_DR, DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR1066, V1_5, DIMM_SR, DIMM_QR, DIMM_SR, DIMM_QR, 2, 8},
+  {3, DDR1066, V1_5, DIMM_DR, DIMM_QR, DIMM_DR, DIMM_QR, 2, 8},
+  {3, DDR1066, V1_35, NP, DIMM_QR, DIMM_SR, DIMM_SR + DIMM_QR, 1, 1},
+  {3, DDR1066, V1_35, NP, DIMM_QR, DIMM_DR, DIMM_DR + DIMM_QR, 1, 1},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_35, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_35, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_35, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1066, V1_35, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, 1, 0},
+  {3, DDR1333, V1_5, NP, DIMM_QR, NP, DIMM_QR, 2, 1},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1333, V1_5, DIMM_SR, DIMM_DR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1333, V1_5, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1333, V1_5, DIMM_DR, DIMM_DR, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1333, V1_5, DIMM_DR, DIMM_DR, DIMM_DR, DIMM_DR, 1, 1},
+  {3, DDR1600, V1_5, DIMM_SR, NP, DIMM_SR, DIMM_SR, 1, 1},
+  {3, DDR1600, V1_5, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1600, V1_5, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, 1, 1},
+  {3, DDR1600, V1_5, DIMM_DR, NP, DIMM_DR, DIMM_DR, 1, 1},
+};
+CONST PSC_TBL_ENTRY RC2IBTTblEntRG34 = {
+   {PSCFG_RC2IBT, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (OrRDdr3RC2IBT) / sizeof (PSCFG_MR2IBT_ENTRY),
+   (VOID *)&OrRDdr3RC2IBT
+};
+
+// RC10[OperatingSpeed]
+// Format :
+// DDRrate,   Operating Speed
+//
+STATIC CONST PSCFG_OPSPD_ENTRY OrRDdr3OpSPD[] = {
+  {DDR667 + DDR800, 0},
+  {DDR1066, 1},
+  {DDR1333, 2},
+  {DDR1600, 3},
+  {DDR1866, 4}
+};
+CONST PSC_TBL_ENTRY RC10OpSpdTblEntRG34 = {
+   {PSCFG_RC10OPSPD, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (OrRDdr3OpSPD) / sizeof (PSCFG_OPSPD_ENTRY),
+   (VOID *)&OrRDdr3OpSPD
+};
+
+//
+// MemClkDis
+//
+STATIC CONST UINT8 ROMDATA Or3RDdr3CLKDis[] = {0x03, 0x0C, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00};
+CONST PSC_TBL_ENTRY ClkDisMapEntRG34 = {
+   {PSCFG_CLKDIS, RDIMM_TYPE, _1DIMM + _2DIMM + _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (Or3RDdr3CLKDis) / sizeof (UINT8),
+   (VOID *)&Or3RDdr3CLKDis
+};
+
+//
+// WL pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA WLPas1SeedOrG34RDIMM[] = {
+  {_1DIMM + _2DIMM + _3DIMM, CH_ALL, 0x41}
+};
+CONST PSC_TBL_ENTRY WLPass1SeedEntRG34 = {
+   {PSCFG_WL_PASS1_SEED, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (WLPas1SeedOrG34RDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&WLPas1SeedOrG34RDIMM
+};
+
+//
+// HW RxEn pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA HWRxEnPas1SeedOrG34RDIMM[] = {
+  {_1DIMM, CH_A, 0x43},
+  {_1DIMM, CH_B, 0x3F},
+  {_1DIMM, CH_C, 0x3A},
+  {_1DIMM, CH_D, 0x35},
+  {_2DIMM, CH_A, 0x54},
+  {_2DIMM, CH_B, 0x4D},
+  {_2DIMM, CH_C, 0x45},
+  {_2DIMM, CH_D, 0x40},
+  {_3DIMM, CH_A, 0x6B},
+  {_3DIMM, CH_B, 0x5E},
+  {_3DIMM, CH_C, 0x4B},
+  {_3DIMM, CH_D, 0x3D}
+};
+CONST PSC_TBL_ENTRY HWRxEnPass1SeedEntRG34 = {
+   {PSCFG_HWRXEN_PASS1_SEED, RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (HWRxEnPas1SeedOrG34RDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&HWRxEnPas1SeedOrG34RDIMM
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/G34/mpUorG3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/G34/mpUorG3.c
new file mode 100644
index 0000000000..fee4e786f8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/G34/mpUorG3.c
@@ -0,0 +1,351 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpUorG3.c
+ *
+ * Platform specific settings for OR G34 DDR3 U-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/OR/G34)
+ * @e \$Revision: 56269 $ @e \$Date: 2011-07-11 12:37:42 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_PS_OR_G34_MPUORG3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+// Slow mode, Address timing and Output drive compensation
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   SlowMode,   AddTmgCtl,   ODC
+//
+STATIC CONST PSCFG_SAO_ENTRY OrG34UDdr3SAO[] = {
+  {1, DDR667, VOLT_ALL, DIMM_SR, NP, NP, 0, 0x00000000, 0x00112222},
+  {1, DDR667, VOLT_ALL, DIMM_DR, NP, NP, 0, 0x003B0000, 0x00112222},
+  {1, DDR800, VOLT_ALL, DIMM_SR, NP, NP, 0, 0x00000000, 0x10112222},
+  {1, DDR800, VOLT_ALL, DIMM_DR, NP, NP, 0, 0x003B0000, 0x10112222},
+  {1, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00383837, 0x20112222},
+  {1, DDR1333, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00363635, 0x30112222},
+  {1, DDR1600, V1_5 + V1_35, DIMM_SR, NP, NP, 0, 0x00353533, 0x30112222},
+  {1, DDR1600, V1_5 + V1_35, DIMM_DR, NP, NP, 1, 0x00003533, 0x30112222},
+  {1, DDR1866, V1_5, DIMM_SR, NP, NP, 0, 0x00333330, 0x30332222},
+  {1, DDR1866, V1_5, DIMM_DR, NP, NP, 1, 0x00003330, 0x30332222},
+  {2, DDR667, VOLT_ALL, NP, DIMM_SR, NP, 0, 0x00000000, 0x00112222},
+  {2, DDR667, VOLT_ALL, NP, DIMM_DR, NP, 0, 0x003B0000, 0x00112222},
+  {2, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00390039, 0x10222222},
+  {2, DDR800, VOLT_ALL, NP, DIMM_SR, NP, 0, 0x00000000, 0x10112222},
+  {2, DDR800, VOLT_ALL, NP, DIMM_DR, NP, 0, 0x003B0000, 0x10112222},
+  {2, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x00390039, 0x20222222},
+  {2, DDR1066, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00383837, 0x20112222},
+  {2, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0, 0x003A3A3A, 0x30222222},
+  {2, DDR1333, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00363635, 0x30112222},
+  {2, DDR1333, VOLT_ALL, DIMM_SR, DIMM_SR, NP, 1, 0x00003939, 0x30222222},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, 1, 0x00003938, 0x30222222},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00003938, 0x30222222},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, 0, 0x00353533, 0x30112222},
+  {2, DDR1600, V1_5, NP, DIMM_DR, NP, 1, 0x00003533, 0x30112222},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_SR, NP, 1, 0x00003738, 0x30222222},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_DR, NP, 1, 0x00003737, 0x30222222},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00003737, 0x30222222},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_SR, 0, 0x00000000, 0x00332222},
+  {3, DDR667, VOLT_ALL, NP, NP, DIMM_DR, 0, 0x003B0000, 0x00332222},
+  {3, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x00390039, 0x10222222},
+  {3, DDR800, VOLT_ALL, NP, NP, DIMM_SR, 0, 0x00000000, 0x10332222},
+  {3, DDR800, VOLT_ALL, NP, NP, DIMM_DR, 0, 0x003B0000, 0x10332222},
+  {3, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x00390039, 0x20222222},
+  {3, DDR1066, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00383837, 0x20332222},
+  {3, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0, 0x003A3A3A, 0x30222222},
+  {3, DDR1333, VOLT_ALL, NP, NP, DIMM_SR + DIMM_DR, 0, 0x00363635, 0x30332222},
+  {3, DDR1333, VOLT_ALL, DIMM_SR, NP, DIMM_SR, 1, 0x00003939, 0x30222222},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, 1, 0x00003938, 0x30222222},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR + DIMM_DR, 1, 0x00003938, 0x30222222},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR, 0, 0x00353533, 0x30332222},
+  {3, DDR1600, V1_5, NP, NP, DIMM_DR, 1, 0x00003533, 0x30332222},
+  {3, DDR1600, V1_5, DIMM_SR, NP, DIMM_SR, 1, 0x00003738, 0x30222222},
+  {3, DDR1600, V1_5, DIMM_SR, NP, DIMM_DR, 1, 0x00003737, 0x30222222},
+  {3, DDR1600, V1_5, DIMM_DR, NP, DIMM_SR + DIMM_DR, 1, 0x00003737, 0x30222222},
+};
+CONST PSC_TBL_ENTRY SAOTblEntUG34 = {
+   {PSCFG_SAO, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (OrG34UDdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+   (VOID *)&OrG34UDdr3SAO
+};
+// training configuratrions
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   2D
+//
+STATIC CONST PSCFG_S___ENTRY OrG34UDdr3S__[] = {
+ // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {1, DDR667 + DDR800 + DDR1066 + DDR1333, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0},
+  {1, DDR1600, V1_5 + V1_35, DIMM_SR + DIMM_DR, NP, NP, 0},
+  {1, DDR1866, V1_5, DIMM_SR + DIMM_DR, NP, NP, 0},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, NP + DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1333, V1_5 + V1_35, NP + DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1333, V1_25, NP, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, 0},
+  {2, DDR1600, V1_5, NP, DIMM_SR + DIMM_DR, NP, 0},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_SR, NP, 0},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_DR, NP, 0},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, 0},
+  // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable__Training
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, NP + DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, V1_5 + V1_35, NP + DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, V1_25, NP, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1333, V1_25, DIMM_SR, NP, DIMM_SR, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR + DIMM_DR, 1},
+  {3, DDR1600, V1_5, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 1},
+  };
+CONST PSC_TBL_ENTRY S__TblEntUG34 = {
+   {PSCFG_S__, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (OrG34UDdr3S__) / sizeof (PSCFG_S___ENTRY),
+   (VOID *)&OrG34UDdr3S__
+};
+// ODT pattern for 1 DPC
+// Format:
+//  Dimm0,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_1D_ODTPAT_ENTRY Or1UDdr3OdtPat[] = {
+  {DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00000001},
+  {DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x00000401}
+};
+CONST PSC_TBL_ENTRY OdtPat1DTblEntUG34 = {
+   {PSCFG_ODT_PAT_1D, UDIMM_TYPE, _1DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (Or1UDdr3OdtPat) / sizeof (PSCFG_1D_ODTPAT_ENTRY),
+   (VOID *)&Or1UDdr3OdtPat
+};
+
+// ODT pattern for 2 DPC
+// Format:
+//  Dimm0,   Dimm1,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG____ODTPAT_ENTRY Or2UDdr3OdtPat[] = {
+  {NP, DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00020000},
+  {NP, DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x08020000},
+  {DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0x00000000, 0x01010202, 0x00000000, 0x09030603}
+};
+CONST PSC_TBL_ENTRY OdtPat2DTblEntUG34 = {
+   {PSCFG_ODT_PAT___, UDIMM_TYPE, _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (Or2UDdr3OdtPat) / sizeof (PSCFG____ODTPAT_ENTRY),
+   (VOID *)&Or2UDdr3OdtPat
+};
+
+// ODT pattern for 3 DPC
+// Format:
+//  Dimm0,   Dimm1,   Dimm2,   RdODTCSHigh,   RdODTCSLow,   WrODTCSHigh,   WrODTCSLow
+//
+STATIC CONST PSCFG_3D_ODTPAT_ENTRY Or3UDdr3OdtPat[] = {
+  {NP, NP, DIMM_SR + DIMM_DR, 0x00000000, 0x00000000, 0x00000004, 0x00000000},
+  {DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, 0x00000101, 0x00000404, 0x00000105, 0x00000405}
+};
+CONST PSC_TBL_ENTRY OdtPat3DTblEntUG34 = {
+   {PSCFG_ODT_PAT_3D, UDIMM_TYPE, _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (Or3UDdr3OdtPat) / sizeof (PSCFG_3D_ODTPAT_ENTRY),
+   (VOID *)&Or3UDdr3OdtPat
+};
+
+// Dram Term and Dynamic Dram Term
+// Format :
+// DimmPerCh,   DDRrate,   VDDIO,   Dimm0,   Dimm1,   Dimm2,   Dimm,   Rank,   RttNom,    RttWr
+//
+STATIC CONST PSCFG_RTT_ENTRY DramTermOrG34UDIMM[] = {
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, R0, 2, 0},
+  {1, DDR667 + DDR800, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 2, 0},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_SR, NP, NP, DIMM_SR, R0, 1, 0},
+  {1, DDR1066 + DDR1333, VOLT_ALL, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 1, 0},
+  {1, DDR1600, V1_5 + V1_35, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1600, V1_5 + V1_35, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {1, DDR1866, V1_5, DIMM_SR, NP, NP, DIMM_SR, R0, 3, 0},
+  {1, DDR1866, V1_5, DIMM_DR, NP, NP, DIMM_DR, R0 + R1, 3, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_SR, NP, DIMM_SR, R0, 2, 0},
+  {2, DDR667 + DDR800, VOLT_ALL, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 2, 0},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, DIMM_SR + DIMM_DR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 3, 2},
+  {2, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 2},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_SR, NP, DIMM_SR, R0, 1, 0},
+  {2, DDR1066 + DDR1333, VOLT_ALL, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 1, 0},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_SR + DIMM_DR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1333, V1_5 + V1_35, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 5, 2},
+  {2, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, DIMM_SR, R0, 5, 2},
+  {2, DDR1600, V1_5, NP, DIMM_SR, NP, DIMM_SR, R0, 3, 0},
+  {2, DDR1600, V1_5, NP, DIMM_DR, NP, DIMM_DR, R0 + R1, 3, 0},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_SR, NP, DIMM_SR, R0, 4, 1},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_DR, NP, DIMM_SR, R0, 4, 1},
+  {2, DDR1600, V1_5, DIMM_SR, DIMM_DR, NP, DIMM_DR, R0 + R1, 4, 1},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR, NP, DIMM_SR, R0, 4, 1},
+  {2, DDR1600, V1_5, DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_DR, R0 + R1, 4, 1},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 2},
+  {3, DDR667 + DDR800, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 3, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, R0, 3, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_DR, NP, DIMM_DR, DIMM_DR, R0, 3, 2},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 1},
+  {3, DDR1066 + DDR1333, VOLT_ALL, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 1},
+  {3, DDR1333, VOLT_ALL, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, R0, 5, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 2},
+  {3, DDR1333, V1_5 + V1_35, DIMM_DR, NP, DIMM_DR, DIMM_DR, R0, 5, 2},
+  {3, DDR1600, V1_5, NP, NP, DIMM_SR, DIMM_SR, R0, 0, 1},
+  {3, DDR1600, V1_5, NP, NP, DIMM_DR, DIMM_DR, R0 + R1, 0, 1},
+  {3, DDR1600, V1_5, DIMM_SR, NP, DIMM_SR, DIMM_SR, R0, 4, 1},
+  {3, DDR1600, V1_5, DIMM_SR, NP, DIMM_DR, DIMM_SR + DIMM_DR, R0, 4, 1},
+  {3, DDR1600, V1_5, DIMM_SR, NP, DIMM_DR, DIMM_DR, R1, 0, 1},
+  {3, DDR1600, V1_5, DIMM_DR, NP, DIMM_SR, DIMM_SR + DIMM_DR, R0, 4, 1},
+  {3, DDR1600, V1_5, DIMM_DR, NP, DIMM_SR + DIMM_DR, DIMM_DR, R1, 0, 1},
+  {3, DDR1600, V1_5, DIMM_DR, NP, DIMM_DR, DIMM_DR, R0, 4, 1},
+};
+CONST PSC_TBL_ENTRY DramTermTblEntUG34 = {
+   {PSCFG_RTT, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (DramTermOrG34UDIMM) / sizeof (PSCFG_RTT_ENTRY),
+   (VOID *)&DramTermOrG34UDIMM
+};
+
+// Max Freq.
+// Format :
+// DimmPerCh,   Dimms,   SR,   DR,   QR,   Speed1_5V,   Speed1_35V,   Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA MaxFreqOrG34UDIMM[] = {
+  {{1, 1, 1, 0, 0, DDR1866_FREQUENCY, DDR1600_FREQUENCY, DDR1333_FREQUENCY}},
+  {{1, 1, 0, 1, 0, DDR1866_FREQUENCY, DDR1600_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 2, 2, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{2, 2, 1, 1, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{2, 2, 0, 2, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 2, 2, 0, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+  {{3, 2, 1, 1, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+  {{3, 2, 0, 2, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}}
+};
+CONST PSC_TBL_ENTRY MaxFreqTblEntUG34 = {
+   {PSCFG_MAXFREQ, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (MaxFreqOrG34UDIMM) / sizeof (PSCFG_MAXFREQ_ENTRY),
+   (VOID *)&MaxFreqOrG34UDIMM
+};
+
+//
+// MemClkDis
+//
+STATIC CONST UINT8 ROMDATA OrUDdr3CLKDis[] = {0x01, 0x04, 0x02, 0x18, 0x20, 0x00, 0x00, 0x00};
+CONST PSC_TBL_ENTRY ClkDisMapEntUG34 = {
+   {PSCFG_CLKDIS, UDIMM_TYPE, _1DIMM + _2DIMM + _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (OrUDdr3CLKDis) / sizeof (UINT8),
+   (VOID *)&OrUDdr3CLKDis
+};
+
+//
+// WL pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA WLPas1SeedOrG34UDIMM[] = {
+  {_1DIMM + _2DIMM + _3DIMM, CH_ALL, 0x0F}
+};
+CONST PSC_TBL_ENTRY WLPass1SeedEntUG34 = {
+   {PSCFG_WL_PASS1_SEED, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (WLPas1SeedOrG34UDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&WLPas1SeedOrG34UDIMM
+};
+
+//
+// HW RxEn pass1 seed
+//
+// Format :
+// DimmPerCh in bit map,   Channel #,   Seed value
+STATIC CONST PSCFG_SEED_ENTRY ROMDATA HWRxEnPas1SeedOrG34UDIMM[] = {
+  {_1DIMM, CH_A, 0x3E},
+  {_1DIMM, CH_B, 0x38},
+  {_1DIMM, CH_C, 0x37},
+  {_1DIMM, CH_D, 0x31},
+  {_2DIMM, CH_A, 0x51},
+  {_2DIMM, CH_B, 0x4A},
+  {_2DIMM, CH_C, 0x46},
+  {_2DIMM, CH_D, 0x3F},
+  {_3DIMM, CH_A, 0x5E},
+  {_3DIMM, CH_B, 0x52},
+  {_3DIMM, CH_C, 0x48},
+  {_3DIMM, CH_D, 0x3C}
+};
+CONST PSC_TBL_ENTRY HWRxEnPass1SeedEntUG34 = {
+   {PSCFG_HWRXEN_PASS1_SEED, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, OR_SOCKET_G34, DDR3_TECHNOLOGY},
+   sizeof (HWRxEnPas1SeedOrG34UDIMM) / sizeof (PSCFG_SEED_ENTRY),
+   (VOID *)&HWRxEnPas1SeedOrG34UDIMM
+};
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/mpor3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/mpor3.c
new file mode 100644
index 0000000000..f4464e938b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/OR/mpor3.c
@@ -0,0 +1,228 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpor3.c
+ *
+ * Platform specific settings for OR
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "Filecode.h"
+
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+
+#define FILECODE PROC_MEM_PS_OR_MPOR3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+//
+// Common tables of Orochi platform specific configuration
+//
+
+// MR0[WR]
+// Format :
+// D18F2x22C_dct[1:0][Twr], MR0[WR]
+//
+CONST PSCFG_MR0WR_ENTRY MR0WR[] = {
+  {0x10, 0},
+  {0x05, 1},
+  {0x06, 2},
+  {0x07, 3},
+  {0x08, 4},
+  {0x0A, 5},
+  {0x0C, 6},
+  {0x0E, 7}
+};
+CONST PSC_TBL_ENTRY MR0WrTblEntry = {
+   {PSCFG_MR0WR, DT_DONT_CARE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+   sizeof (MR0WR) / sizeof (PSCFG_MR0WR_ENTRY),
+   (VOID *)&MR0WR
+};
+
+// MR0[CL]
+// Format :
+// D18F2x200_dct[1:0][Tcl], MR0[CL][3:1], MR0[CL][0]
+//
+CONST PSCFG_MR0CL_ENTRY MR0CL[] = {
+  {0x05, 1, 0},
+  {0x06, 2, 0},
+  {0x07, 3, 0},
+  {0x08, 4, 0},
+  {0x09, 5, 0},
+  {0x0A, 6, 0},
+  {0x0B, 7, 0},
+  {0x0C, 0, 1},
+  {0x0D, 1, 1},
+  {0x0E, 2, 1},
+  {0x0F, 3, 1},
+  {0x10, 4, 1}
+};
+CONST PSC_TBL_ENTRY MR0CLTblEntry = {
+   {PSCFG_MR0CL, DT_DONT_CARE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+   sizeof (MR0CL) / sizeof (PSCFG_MR0CL_ENTRY),
+   (VOID *)&MR0CL
+};
+
+
+//
+// CKE tri-state
+//
+STATIC CONST UINT8 ROMDATA OrDdr3CKETri[] = {0x55, 0xAA};
+CONST PSC_TBL_ENTRY OrDdr3CKETriEnt = {
+   {PSCFG_CKETRI, DT_DONT_CARE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+   sizeof (OrDdr3CKETri) / sizeof (UINT8),
+   (VOID *)&OrDdr3CKETri
+};
+
+
+//
+// ODT tri-state [UDIMM & RDIMM][1DPC & 2DPC]
+//
+// Bit 0: MEMODT[1,0][0]
+// Bit 1: MEMODT[1,0][1]
+// Bit 2: MEMODT[1,0][2]
+// Bit 3: MEMODT[1,0][3]
+//
+// Dimm 0 : BP_MEMCSx[1:0], BP_MEMODTx[2, 0]
+// Dimm 1 : BP_MEMCSx[3:2], BP_MEMODTx[3, 1]
+STATIC CONST UINT8 ROMDATA OrDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08};
+CONST PSC_TBL_ENTRY OrDdr3ODTTriEnt = {
+   {PSCFG_ODTTRI, UDIMM_TYPE + RDIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+   sizeof (OrDdr3ODTTri) / sizeof (UINT8),
+   (VOID *)&OrDdr3ODTTri
+};
+//
+// ODT tri-state [UDIMM & RDIMM][3DPC]
+//
+// Dimm 0: BP_MEMCSx[1:0], BP_MEMODTx[0]
+// Dimm 1: BP_MEMCSx[7:6, 3:2], BP_MEMODTx[3, 1]
+// Dimm 2: BP_MEMCSx[5:4], BP_MEMODTx[2]
+STATIC CONST UINT8 ROMDATA OrDdr3ODTTri3D[] = {0x03, 0x44, 0x30, 0x88};
+CONST PSC_TBL_ENTRY OrDdr3ODTTri3DEnt = {
+   {PSCFG_ODTTRI, UDIMM_TYPE + RDIMM_TYPE, _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+   sizeof (OrDdr3ODTTri3D) / sizeof (UINT8),
+   (VOID *)&OrDdr3ODTTri3D
+};
+
+
+//
+// ODT tri-state [LRDIMM][1DPC & 2DPC]
+//
+// Bit 0: MEMODT[1,0][0]
+// Bit 1: MEMODT[1,0][1]
+// Bit 2: MEMODT[1,0][2]
+// Bit 3: MEMODT[1,0][3]
+//
+// Dimm 0 : BP_MEMCSx[5:4, 1:0], BP_MEMODTx[2, 0]
+// Dimm 1 : BP_MEMCSx[7:6, 3:2], BP_MEMODTx[3, 1]
+// LR : Assert DIMM ODT0 only
+STATIC CONST UINT8 ROMDATA OrLRDdr3ODTTri[] = {0x03, 0x0C, 0x00, 0x00};
+CONST PSC_TBL_ENTRY OrLRDdr3ODTTriEnt = {
+   {PSCFG_ODTTRI, LRDIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+   sizeof (OrLRDdr3ODTTri) / sizeof (UINT8),
+   (VOID *)&OrLRDdr3ODTTri
+};
+
+//
+// ODT tri-state [LRDIMM][3DPC]
+//
+// Dimm 0: BP_MEMCSx[1:0], BP_MEMODTx[0]
+// Dimm 1: BP_MEMCSx[7:6, 3:2], BP_MEMODTx[3, 1]
+// Dimm 2: BP_MEMCSx[5:4], BP_MEMODTx[2]
+// LR : Assert DIMM ODT0 only
+STATIC CONST UINT8 ROMDATA OrLRDdr3ODTTri3D[] = {0x03, 0x0C, 0x30, 0xC0};
+CONST PSC_TBL_ENTRY OrLRDdr3ODTTri3DEnt = {
+   {PSCFG_ODTTRI, LRDIMM_TYPE, _3DIMM, {AMD_FAMILY_15_OR, AMD_F15_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+   sizeof (OrLRDdr3ODTTri3D) / sizeof (UINT8),
+   (VOID *)&OrLRDdr3ODTTri3D
+};
+
+//
+// ChipSel tri-state [UDIMM]
+//
+STATIC CONST UINT8 ROMDATA OrUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
+CONST PSC_TBL_ENTRY OrUDdr3CSTriEnt = {
+   {PSCFG_CSTRI, UDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+   sizeof (OrUDdr3CSTri) / sizeof (UINT8),
+   (VOID *)&OrUDdr3CSTri
+};
+//
+// ChipSel tri-state [RDIMM & LRDIMM]
+// BIOS must not tri-state chip select pin corresponding to the second chip
+// select of a single rank registered dimm
+STATIC CONST UINT8 ROMDATA OrDdr3CSTri[] = {0x01, 0x03, 0x04, 0x0C, 0x10, 0x30, 0x40, 0xC0};
+CONST PSC_TBL_ENTRY OrDdr3CSTriEnt = {
+   {PSCFG_CSTRI, LRDIMM_TYPE + RDIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_15_OR, AMD_F15_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+   sizeof (OrDdr3CSTri) / sizeof (UINT8),
+   (VOID *)&OrDdr3CSTri
+};
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/PH/mpsph3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/PH/mpsph3.c
new file mode 100644
index 0000000000..c7bdbe24da
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/PH/mpsph3.c
@@ -0,0 +1,255 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpsPh3.c
+ *
+ * Platform specific settings for Ph DDR3 SO-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_PH_MPSPH3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsSPh3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemPGetPORFreqLimitSPh3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY PhSDdr3DramTerm1D[] = {
+  {DDR800, ONE_DIMM, NO_DIMM, 2, 0, 0},
+  {DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0}
+};
+
+STATIC CONST DRAM_TERM_ENTRY PhSDdr3DramTerm2D[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1066 + DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1}
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor the platform specific settings for SO-DIMM Ph DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsSPh3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_PH) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->SODimmPresent != ChannelPtr->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  PsPtr->MemPDoPs = MemPDoPsSPh3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitSPh3;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for SO-DIMM Ph DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsSPh3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST DRAM_TERM_ENTRY *DramTermPtr;
+  UINT8 MaxDimmsPerChannel;
+  UINT8 *DimmsPerChPtr;
+  UINT8 DramTermSize;
+
+  DramTermSize = 0;
+  DramTermPtr = NULL;
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmsPerChannel = *DimmsPerChPtr;
+  } else {
+    MaxDimmsPerChannel = 2;
+  }
+
+  if (MaxDimmsPerChannel == 1) {
+    DramTermSize = GET_SIZE_OF (PhSDdr3DramTerm1D);
+    DramTermPtr = PhSDdr3DramTerm1D;
+  } else if (MaxDimmsPerChannel == 2) {
+    DramTermSize = GET_SIZE_OF (PhSDdr3DramTerm2D);
+    DramTermPtr = PhSDdr3DramTerm2D;
+  } else {
+    IDS_ERROR_TRAP;
+  }
+
+  if (!MemPGetDramTerm (NBPtr, DramTermSize, DramTermPtr)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function gets the POR speed limit for SO-DDR3 Ph
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *
+ */
+VOID
+STATIC
+MemPGetPORFreqLimitSPh3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 *DimmsPerChPtr;
+  UINT8 MaxDimmPerCH;
+  UINT16 SpeedLimit;
+
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  if (MaxDimmPerCH == 1) {
+    if (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) {
+      //
+      // Highest POR supported speed for SODimm is 1333
+      //
+      SpeedLimit = DDR1333_FREQUENCY;
+    } else {
+      //
+      // Max LV DDR3 Speed is 1066 for this silicon
+      //
+      SpeedLimit = DDR1066_FREQUENCY;
+    }
+  } else {
+    //
+    // Highest supported speed in 2DPC configuration is 1066
+    //
+    SpeedLimit = DDR1066_FREQUENCY;
+    //
+    // VOLT1_35 won't be supported while two DIMMs are populated in a channel
+    //
+    if ((NBPtr->RefPtr->DDR3Voltage == VOLT1_35) &&
+       (NBPtr->ChannelPtr->Dimms == 2)) {
+      NBPtr->RefPtr->DDR3Voltage = VOLT1_5;
+      PutEventLog (AGESA_WARNING, MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_WARNING, NBPtr->MCTPtr);
+    }
+  }
+  if (NBPtr->DCTPtr->Timings.TargetSpeed > SpeedLimit) {
+    NBPtr->DCTPtr->Timings.TargetSpeed = SpeedLimit;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/PH/mpuph3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/PH/mpuph3.c
new file mode 100644
index 0000000000..76b97bfcd9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/PH/mpuph3.c
@@ -0,0 +1,209 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpuPh3.c
+ *
+ * Platform specific settings for Ph DDR3 U-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_PH_MPUPH3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsUPh3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemPGetPORFreqLimitUPh3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY DrUDdr3DramTerm[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1}
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor for the platform specific settings for U-DDR3 Ph DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsUPh3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_PH) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if ((ChannelPtr->RegDimmPresent != 0) || (ChannelPtr->SODimmPresent != 0)) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  PsPtr->MemPDoPs = MemPDoPsUPh3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitUPh3;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for U-DDR3 Ph DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsUPh3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (!MemPGetDramTerm (NBPtr, GET_SIZE_OF (DrUDdr3DramTerm), DrUDdr3DramTerm)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function gets the POR speed limit for U-DDR3 Ph
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *
+ */
+VOID
+STATIC
+MemPGetPORFreqLimitUPh3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT16 SpeedLimit;
+
+  if (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) {
+    //
+    // Highest POR supported speed for Unbuffered dimm is 1333
+    //
+    SpeedLimit = DDR1333_FREQUENCY;
+  } else {
+    //
+    // Max LV DDR3 Speed is 1066 for this silicon
+    //
+    SpeedLimit = DDR1066_FREQUENCY;
+  }
+
+  if (NBPtr->DCTPtr->Timings.TargetSpeed > SpeedLimit) {
+    NBPtr->DCTPtr->Timings.TargetSpeed = SpeedLimit;
+  } else if (NBPtr->DCTPtr->Timings.TargetSpeed == DDR667_FREQUENCY) {
+    // Unbuffered DDR3 at 333MHz is not supported
+    NBPtr->DCTPtr->Timings.DimmExclude |= NBPtr->DCTPtr->Timings.DctDimmValid;
+    PutEventLog (AGESA_ERROR, MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+    // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+    NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/RB/mpsRb3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/RB/mpsRb3.c
new file mode 100644
index 0000000000..c84e505f54
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/RB/mpsRb3.c
@@ -0,0 +1,255 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpsRb3.c
+ *
+ * Platform specific settings for RB DDR3 SO-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_RB_MPSRB3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsSRb3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemPGetPORFreqLimitSRb3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY RbSDdr3DramTerm1D[] = {
+  {DDR800, ONE_DIMM, NO_DIMM, 2, 0, 0},
+  {DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0}
+};
+
+STATIC CONST DRAM_TERM_ENTRY RbSDdr3DramTerm2D[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1066 + DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1}
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor the platform specific settings for SO-DIMM RB DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsSRb3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->SODimmPresent != ChannelPtr->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  PsPtr->MemPDoPs = MemPDoPsSRb3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitSRb3;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for SO-DIMM RB DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsSRb3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST DRAM_TERM_ENTRY *DramTermPtr;
+  UINT8 MaxDimmsPerChannel;
+  UINT8 *DimmsPerChPtr;
+  UINT8 DramTermSize;
+
+  DramTermSize = 0;
+  DramTermPtr = NULL;
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmsPerChannel = *DimmsPerChPtr;
+  } else {
+    MaxDimmsPerChannel = 2;
+  }
+
+  if (MaxDimmsPerChannel == 1) {
+    DramTermSize = GET_SIZE_OF (RbSDdr3DramTerm1D);
+    DramTermPtr = RbSDdr3DramTerm1D;
+  } else if (MaxDimmsPerChannel == 2) {
+    DramTermSize = GET_SIZE_OF (RbSDdr3DramTerm2D);
+    DramTermPtr = RbSDdr3DramTerm2D;
+  } else {
+    IDS_ERROR_TRAP;
+  }
+
+  if (!MemPGetDramTerm (NBPtr, DramTermSize, DramTermPtr)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function gets the POR speed limit for SO-DDR3 RB
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *
+ */
+VOID
+STATIC
+MemPGetPORFreqLimitSRb3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 *DimmsPerChPtr;
+  UINT8 MaxDimmPerCH;
+  UINT16 SpeedLimit;
+
+  DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  if (MaxDimmPerCH == 1) {
+    if (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) {
+      //
+      // Highest POR supported speed for SODimm is 1333
+      //
+      SpeedLimit = DDR1333_FREQUENCY;
+    } else {
+      //
+      // Max LV DDR3 Speed is 1066 for this silicon
+      //
+      SpeedLimit = DDR1066_FREQUENCY;
+    }
+  } else {
+    //
+    // Highest supported speed in 2DPC configuration is 1066
+    //
+    SpeedLimit = DDR1066_FREQUENCY;
+    //
+    // VOLT1_35 won't be supported while two DIMMs are populated in a channel
+    //
+    if ((NBPtr->RefPtr->DDR3Voltage == VOLT1_35) &&
+       (NBPtr->ChannelPtr->Dimms == 2)) {
+      NBPtr->RefPtr->DDR3Voltage = VOLT1_5;
+      PutEventLog (AGESA_WARNING, MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_WARNING, NBPtr->MCTPtr);
+    }
+  }
+  if (NBPtr->DCTPtr->Timings.TargetSpeed > SpeedLimit) {
+    NBPtr->DCTPtr->Timings.TargetSpeed = SpeedLimit;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/RB/mpuRb3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/RB/mpuRb3.c
new file mode 100644
index 0000000000..d461c1e31f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/RB/mpuRb3.c
@@ -0,0 +1,209 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpuRb3.c
+ *
+ * Platform specific settings for RB DDR3 U-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/* This file contains routine that add platform specific support L1 */
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_RB_MPURB3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPDoPsURb3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemPGetPORFreqLimitURb3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+STATIC CONST DRAM_TERM_ENTRY DrUDdr3DramTerm[] = {
+  {DDR800 + DDR1066 + DDR1333 + DDR1600, ONE_DIMM, NO_DIMM, 1, 0, 0},
+  {DDR800 + DDR1066, TWO_DIMM, NO_DIMM, 3, 0, 2},
+  {DDR1333, TWO_DIMM, NO_DIMM, 5, 0, 2},
+  {DDR1600, TWO_DIMM, NO_DIMM, 5, 0, 1}
+};
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function is the constructor for the platform specific settings for U-DDR3 RB DDR3
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in,out]   *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in,out]   *PsPtr       Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_SUCCESS
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsURb3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  ASSERT (MemPtr != 0);
+  ASSERT (ChannelPtr != 0);
+
+  if ((ChannelPtr->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) {
+    return AGESA_UNSUPPORTED;
+  }
+  if (ChannelPtr->TechType != DDR3_TECHNOLOGY) {
+    return AGESA_UNSUPPORTED;
+  }
+  if ((ChannelPtr->RegDimmPresent != 0) || (ChannelPtr->SODimmPresent != 0)) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  PsPtr->MemPDoPs = MemPDoPsURb3;
+  PsPtr->MemPGetPORFreqLimit = MemPGetPORFreqLimitURb3;
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for U-DDR3 RB DDR3
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Find settings for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find settings for corresponding platform and dimm population.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemPDoPsURb3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  if (!MemPGetDramTerm (NBPtr, GET_SIZE_OF (DrUDdr3DramTerm), DrUDdr3DramTerm)) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function gets the POR speed limit for U-DDR3 RB
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *
+ */
+VOID
+STATIC
+MemPGetPORFreqLimitURb3 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT16 SpeedLimit;
+
+  if (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) {
+    //
+    // Highest POR supported speed for Unbuffered dimm is 1333
+    //
+    SpeedLimit = DDR1333_FREQUENCY;
+  } else {
+    //
+    // Max LV DDR3 Speed is 1066 for this silicon
+    //
+    SpeedLimit = DDR1066_FREQUENCY;
+  }
+
+  if (NBPtr->DCTPtr->Timings.TargetSpeed > SpeedLimit) {
+    NBPtr->DCTPtr->Timings.TargetSpeed = SpeedLimit;
+  } else if (NBPtr->DCTPtr->Timings.TargetSpeed == DDR667_FREQUENCY) {
+    // Unbuffered DDR3 at 333MHz is not supported
+    NBPtr->DCTPtr->Timings.DimmExclude |= NBPtr->DCTPtr->Timings.DctDimmValid;
+    PutEventLog (AGESA_ERROR, MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+    // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+    NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mp.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mp.c
new file mode 100644
index 0000000000..92250693ef
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mp.c
@@ -0,0 +1,1225 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mp.c
+ *
+ * Common platform specific configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 55046 $ @e \$Date: 2011-06-15 23:59:07 -0600 (Wed, 15 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_MP_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define PSO_TYPE    0
+#define PSO_LENGTH  1
+#define PSO_DATA    2
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPPSCGen (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+BOOLEAN
+STATIC
+MemPCheckTblDrvOverrideConfig (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  );
+
+BOOLEAN
+STATIC
+MemPCheckTblDrvOverrideConfigSpeedLimit (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  );
+
+VOID
+STATIC
+MemPTblDrvOverrideSpeedLimit (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  );
+
+UINT8
+STATIC
+MemPTblDrvOverrideODT (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  );
+
+VOID
+STATIC
+MemPTblDrvOverrideODTPattern (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  );
+
+UINT8
+STATIC
+MemPTblDrvOverrideRC2IBT (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer,
+  IN       UINT8 NumOfReg
+  );
+
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR0WR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  );
+
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR0CL (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  );
+
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR10OpSpeed (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This is the default return function of the Platform Specific block. The function always
+ *    returns   AGESA_UNSUPPORTED
+ *
+ *     @param[in,out]   *MemPtr           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       *ChannelPtr       Pointer to CH_DEF_STRUCT
+ *     @param[in]       *PsPtr            Pointer to MEM_PS_BLOCK
+ *
+ *     @return          AGESA_UNSUPPORTED  AGESA status indicating that default is unsupported
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsUDef (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  )
+{
+  return AGESA_UNSUPPORTED;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function will set the DramTerm and DramTermDyn in the structure of a channel.
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *     @param[in]       ArraySize        Size of the array of DramTerm
+ *     @param[in]       *DramTermPtr     Address the array of DramTerm
+ *
+ *     @return          TRUE - Find DramTerm and DramTermDyn for corresponding platform and dimm population.
+ *     @return          FALSE - Fail to find DramTerm and DramTermDyn for corresponding platform and dimm population.
+ *
+ */
+BOOLEAN
+MemPGetDramTerm (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ArraySize,
+  IN       CONST DRAM_TERM_ENTRY *DramTermPtr
+  )
+{
+  UINT8 Dimms;
+  UINT8 QR_Dimms;
+  UINT8 i;
+  Dimms = NBPtr->ChannelPtr->Dimms;
+  QR_Dimms = 0;
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i ++) {
+    if (((NBPtr->ChannelPtr->DimmQrPresent & (UINT16) (1 << i)) != 0) && (i < 2)) {
+      QR_Dimms ++;
+    }
+  }
+
+  for (i = 0; i < ArraySize; i ++) {
+    if ((DramTermPtr[i].Speed & ((UINT32) 1 << (NBPtr->DCTPtr->Timings.Speed / 66))) != 0) {
+      if ((((UINT8) (1 << (Dimms - 1)) & DramTermPtr[i].Dimms) != 0) || (DramTermPtr[i].Dimms == ANY_NUM)) {
+        if (((QR_Dimms == 0) && (DramTermPtr[i].QR_Dimms == NO_DIMM)) ||
+            ((QR_Dimms > 0) && (((UINT8) (1 << (QR_Dimms - 1)) & DramTermPtr[i].QR_Dimms) != 0)) ||
+            (DramTermPtr[i].QR_Dimms == ANY_NUM)) {
+          NBPtr->PsPtr->DramTerm = DramTermPtr[i].DramTerm;
+          NBPtr->PsPtr->QR_DramTerm = DramTermPtr[i].QR_DramTerm;
+          NBPtr->PsPtr->DynamicDramTerm = DramTermPtr[i].DynamicDramTerm;
+          break;
+        }
+      }
+    }
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function gets the highest POR supported speed.
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *     @param[in]       FreqLimitSize    Size of the array of Frequency Limit
+ *     @param[in]       *FreqLimitPtr     Address the array of Frequency Limit
+ *
+ *     @return          UINT8 - frequency limit
+ *
+ */
+UINT16
+MemPGetPorFreqLimit (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 FreqLimitSize,
+  IN       CONST POR_SPEED_LIMIT *FreqLimitPtr
+  )
+{
+  UINT8 i;
+  UINT8 j;
+  UINT8 DimmTpMatch;
+  UINT16 SpeedLimit;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType;
+
+  SpeedLimit = 0;
+  DIMMRankType = MemAGetPsRankType (NBPtr->ChannelPtr);
+  for (i = 0; i < FreqLimitSize; i++, FreqLimitPtr++) {
+    if (NBPtr->ChannelPtr->Dimms != FreqLimitPtr->Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType = DIMMRankType & FreqLimitPtr->DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j ++) {
+      if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == FreqLimitPtr->Dimms) {
+      if (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) {
+        SpeedLimit = FreqLimitPtr->SpeedLimit_1_5V;
+        break;
+      } else if (NBPtr->RefPtr->DDR3Voltage == VOLT1_25) {
+        SpeedLimit = FreqLimitPtr->SpeedLimit_1_25V;
+        break;
+      } else {
+        SpeedLimit = FreqLimitPtr->SpeedLimit_1_35V;
+        break;
+      }
+    }
+  }
+
+  return SpeedLimit;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function is the default function for getting POR speed limit. When a
+ *    package does not need to cap the speed, it should use this function to initialize
+ *    the corresponding function pointer.
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ */
+VOID
+MemPGetPORFreqLimitDef (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function gets the seed value of WL and HW RxEn pass 1 training.
+ *
+ *     @param[in,out]   *NBPtr           Pointer to MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Entries are found
+ *     @return          FALSE - Entries are not found
+ *
+ */
+BOOLEAN
+MemPGetPSCPass1Seed (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 i;
+  UINT8 Dct;
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    i = 0;
+    while (memPlatSpecFlowArray[i] != NULL) {
+      if (!(memPlatSpecFlowArray[i])->TrainingSeedVal (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+        return FALSE;
+      }
+      i++;
+    }
+  }
+
+  return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function gets platform specific configuration such as Max Freq., Slow Mode, Dram Term,
+ *    and so on.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - Successfully execute platform specific configuration flow.
+ *     @return          FALSE - Fail to execute platform specific configuration flow.
+ *
+ */
+BOOLEAN
+MemPPSCFlow (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 i;
+  BOOLEAN Result;
+
+  Result = TRUE;
+  i = 0;
+  while (memPlatSpecFlowArray[i] != NULL) {
+    if ((memPlatSpecFlowArray[i])->DramTerm (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+      if ((memPlatSpecFlowArray[i])->ODTPattern (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+        if ((memPlatSpecFlowArray[i])->SAO (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+          if ((memPlatSpecFlowArray[i])->MR0WrCL (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+            if ((memPlatSpecFlowArray[i])->RC2IBT (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+              if ((memPlatSpecFlowArray[i])->RC10OpSpeed (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+                if ((memPlatSpecFlowArray[i])->LRIBT (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+                  if ((memPlatSpecFlowArray[i])->LRNPR (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+                    if ((memPlatSpecFlowArray[i])->LRNLR (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+                      if (MemPPSCGen (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+                        break;
+                      }
+                    }
+                  }
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+    i++;
+  }
+
+  IDS_SKIP_HOOK (IDS_ENFORCE_PLAT_TABLES, NBPtr, &(NBPtr->MemPtr->StdHeader)) {
+    if (memPlatSpecFlowArray[i] == NULL) {
+      Result = FALSE;
+    }
+  }
+  return Result;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function constructs the rank type map of Dimm0, Dimm1, Dimm2. Also it counts the number
+ *     of dimm in the table.
+ *
+ *     @param[in]       Dimm0       Rank type of Dimm0
+ *     @param[in]       Dimm1       Rank type of Dimm1
+ *     @param[in]       Dimm2       Rank type of Dimm2
+ *     @param[in, out]       *RankTypeInTable       Pointer to RankTypeInTable variable
+ *
+ *
+ */
+VOID
+MemPConstructRankTypeMap (
+  IN       UINT16 Dimm0,
+  IN       UINT16 Dimm1,
+  IN       UINT16 Dimm2,
+  IN OUT   UINT16 *RankTypeInTable
+  )
+{
+  UINT8 i;
+  UINT16 RT;
+  UINT8 BitShift;
+
+  *RankTypeInTable = 0;
+  RT = 0;
+  BitShift = 0;
+
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+    switch (i) {
+    case 0:
+      RT = (Dimm0 == 0) ? NP : Dimm0;
+      BitShift = 0;
+      break;
+    case 1:
+      RT = (Dimm1 == 0) ? NP : Dimm1;
+      BitShift = 4;
+      break;
+    case 2:
+      RT = (Dimm2 == 0) ? NP : Dimm2;
+      BitShift = 8;
+      break;
+    default:
+      // dimm3 is not used, fills nibble3 with "NP"
+      RT = NP;
+      BitShift = 12;
+    }
+    *RankTypeInTable |= RT << BitShift;
+  }
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemPIsIdSupported
+ *      This function matches the CPU_LOGICAL_ID and PackageType with certain criteria to
+ *      determine if it is supported by this NB type.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       LogicalId - CPU_LOGICAL_ID
+ *     @param[in]       PackageType - Package Type
+ *
+ *     @return          TRUE -  NB type is matched !
+ *     @return          FALSE - NB type is not matched !
+ *
+ */
+BOOLEAN
+MemPIsIdSupported (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID LogicalId,
+  IN       UINT8 PackageType
+  )
+{
+  CPUID_DATA CpuId;
+  UINT8 PkgType;
+
+  LibAmdCpuidRead (AMD_CPUID_FMF, &CpuId, &(NBPtr->MemPtr->StdHeader));
+  PkgType = (UINT8) (CpuId.EBX_Reg >> 28) & 0xF; // bit 31:28
+
+  if (((NBPtr->MCTPtr->LogicalCpuid.Family & LogicalId.Family) != 0)
+      && ((NBPtr->MCTPtr->LogicalCpuid.Revision & LogicalId.Revision) != 0)) {
+    if ((PackageType == PT_DONT_CARE) || (PackageType == PkgType)) {
+      return TRUE;
+    }
+  }
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function returns the rank type map of a channel.
+ *
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          UINT16 - The map of rank type.
+ *
+ */
+UINT16
+MemPGetPsRankType (
+  IN       CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  UINT8 i;
+  UINT16 DIMMRankType;
+
+  DIMMRankType = 0;
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+    if (CurrentChannel->MCTPtr->Status[SbLrdimms]) {
+      // For LrDimm, we construct the map according to Dimm present bits rather than rank type bits
+      if ((CurrentChannel->LrDimmPresent & (UINT8) 1 << i) != 0) {
+        DIMMRankType |= (UINT16) DIMM_LR << (i << 2);
+      } else {
+        DIMMRankType |= (UINT16) NP << (i << 2);
+      }
+    } else {
+      if ((CurrentChannel->DimmQrPresent & (UINT8) 1 << i) != 0) {
+        if (i < 2) {
+          DIMMRankType |= (UINT16) DIMM_QR << (i << 2);
+        }
+      } else if ((CurrentChannel->DimmDrPresent & (UINT8) 1 << i) != 0) {
+        DIMMRankType |= (UINT16) DIMM_DR << (i << 2);
+      } else if ((CurrentChannel->DimmSRPresent & (UINT8) 1 << i) != 0) {
+        DIMMRankType |= (UINT16) DIMM_SR << (i << 2);
+      } else {
+        DIMMRankType |= (UINT16) NP << (i << 2);
+      }
+    }
+  }
+
+  return DIMMRankType;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function performs the action for the rest of platform specific configuration such as
+ *    tri-state stuff
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables       Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - No error occurred.
+ *     @return          FALSE - Error occurred.
+ *
+ */
+BOOLEAN
+STATIC
+MemPPSCGen (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  PSCFG_TYPE PSCType;
+  DIMM_TYPE DimmType;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  CH_DEF_STRUCT *CurrentChannel;
+  UINT32 EventInfo;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  if (CurrentChannel->RegDimmPresent != 0) {
+    DimmType = RDIMM_TYPE;
+  } else if (CurrentChannel->SODimmPresent != 0) {
+    DimmType = SODIMM_TYPE;
+  } else if (CurrentChannel->LrDimmPresent != 0) {
+    DimmType = LRDIMM_TYPE;
+  } else {
+    DimmType = UDIMM_TYPE;
+  }
+
+  for (PSCType = PSCFG_GEN_START + 1; PSCType < PSCFG_GEN_END; PSCType++) {
+    i = 0;
+    while (EntryOfTables->TblEntryOfGen[i] != NULL) {
+      if ((EntryOfTables->TblEntryOfGen[i])->Header.PSCType == PSCType) {
+        if (((EntryOfTables->TblEntryOfGen[i])->Header.DimmType & DimmType) != 0) {
+          if (((EntryOfTables->TblEntryOfGen[i])->Header.NumOfDimm & NOD) != 0) {
+            //
+            // Determine if this is the expected NB Type
+            //
+            LogicalCpuid = (EntryOfTables->TblEntryOfGen[i])->Header.LogicalCpuid;
+            PackageType = (EntryOfTables->TblEntryOfGen[i])->Header.PackageType;
+            if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+              break;
+            }
+          }
+        }
+      }
+      i++;
+    }
+
+    // Check whether no table entry is found.
+    if (EntryOfTables->TblEntryOfGen[i] == NULL) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\nNo %s Table\n", (PSCType == PSCFG_CLKDIS) ? "ClkDis" : ((PSCType == PSCFG_CKETRI) ? "CkeTri" : ((PSCType == PSCFG_ODTTRI) ? "OdtTri" : "CsTri")));
+      EventInfo = (PSCType == PSCFG_CLKDIS) ? MEM_ERROR_CLK_DIS_MAP_NOT_FOUND : ((PSCType == PSCFG_CKETRI) ? MEM_ERROR_CKE_TRI_MAP_NOT_FOUND : ((PSCType == PSCFG_ODTTRI) ? MEM_ERROR_ODT_TRI_MAP_NOT_FOUND : MEM_ERROR_CS_TRI_MAP_NOT_FOUND));
+      PutEventLog (AGESA_ERROR, EventInfo, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+      if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+        ASSERT (FALSE);
+      }
+      return FALSE;
+    }
+
+    // Perform the action for specific PSCType.
+    if (PSCType == PSCFG_CLKDIS) {
+      CurrentChannel->MemClkDisMap = (UINT8 *) (EntryOfTables->TblEntryOfGen[i])->TBLPtr;
+    } else if (PSCType == PSCFG_CKETRI) {
+      CurrentChannel->CKETriMap = (UINT8 *) (EntryOfTables->TblEntryOfGen[i])->TBLPtr;
+    } else if (PSCType == PSCFG_ODTTRI) {
+      CurrentChannel->ODTTriMap = (UINT8 *) (EntryOfTables->TblEntryOfGen[i])->TBLPtr;
+    } else if (PSCType == PSCFG_CSTRI) {
+      CurrentChannel->ChipSelTriMap = (UINT8 *) (EntryOfTables->TblEntryOfGen[i])->TBLPtr;
+    }
+  }
+
+  CurrentChannel->DctEccDqsLike = 0x0403;
+  CurrentChannel->DctEccDqsScale = 0x70;
+
+  return TRUE;
+}
+
+
+ /* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function proceeds Table Driven Overriding.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in] PlatformMemoryConfiguration - Pointer to Platform config table
+ *     @param[in] ProceededPSOType - Proceeded PSO type
+ *
+ *     @return          bit0 ~ bit7 - Overriding CS or DIMM map.
+ *     @return          bit15         - Invalid entry found if set.
+ *
+ */
+UINT16
+MemPProceedTblDrvOverride (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       UINT8 ProceededPSOType
+  )
+{
+  UINT8 *Buffer;
+  UINT8 *PSOStartPtr;
+  UINT8 NumOfReg;
+  UINT8 RetVal;
+  UINT16 RetVal16;
+  BOOLEAN ConfigMatched;
+  BOOLEAN FirstGoThrough;
+  BOOLEAN FindNewConfig;
+  BOOLEAN InvertRetVal;
+  BOOLEAN InvalidConfigDetected;
+
+
+  ASSERT (PlatformMemoryConfiguration != NULL);
+  ASSERT ((ProceededPSOType >= PSO_TBLDRV_START) && (ProceededPSOType <= PSO_TBLDRV_END));
+
+  NumOfReg = 0;
+  RetVal = 0;
+  RetVal16 = 0;
+  FirstGoThrough = TRUE;
+  InvertRetVal = FALSE;
+  InvalidConfigDetected = FALSE;
+  //
+  //   << P E R S P E C T I V E >>
+  //
+  //   PlatformMemoryConfiguration [] = {
+  //     . . . . . . . . . . . . . . . . . . .
+  //     . . . . . . . . . . . . . . . . . . .
+  //    TBLDRV_CONFIG_TO_OVERRIDE (2, DDR1600, VOLT1_5_ + VOLT1_35_, SR_DIMM0 + DR_DIMM1),
+  //       TBLDRV_CONFIG_ENTRY_RTTNOM (CS2_ + CS3_, 2),
+  //       TBLDRV_CONFIG_ENTRY_RTTWR (CS2_, 2),
+  //       TBLDRV_CONFIG_ENTRY_RTTWR (CS3_, 1),
+  //       TBLDRV_CONFIG_ENTRY_ADDRTMG (0x003C3C3C),
+  //       TBLDRV_CONFIG_ENTRY_ODCCTRL (0x20112222),
+  //
+  //     TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE (2, 2, 0, 0)
+  //       TBLDRV_CONFIG_ENTRY_SPEEDLIMIT (DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY),
+  //
+  //     TBLDRV_CONFIG_TO_OVERRIDE (2, DDR1333, VOLT1_5_ + VOLT1_35_, SR_DIMM0 + DR_DIMM1),
+  //       TBLDRV_CONFIG_ENTRY_RTTNOM (CS2_ + CS3_, 3),
+  //       TBLDRV_CONFIG_ENTRY_RTTWR (CS2_ + CS3_, 0),
+  //
+  //     TBLDRV_OVERRIDE_MR0_WR (3, 5)
+  //     TBLDRV_OVERRIDE_MR0_WR (4, 6)
+  //
+  //     TBLDRV_OVERRIDE_MR0_CL (3, 5)
+  //     TBLDRV_OVERRIDE_MR0_CL (4, 6)
+  //     . . . . . . . . . . . . . . . . . . .
+  //     . . . . . . . . . . . . . . . . . . .
+  //
+  //     PSO_END
+  //   }
+  //
+  Buffer = PlatformMemoryConfiguration;
+  // Look for configuration descriptor and its sub-descriptor.
+  while (Buffer[PSO_TYPE] != PSO_END) {
+    FindNewConfig = FALSE;
+    ConfigMatched = FALSE;
+    if (Buffer[PSO_TYPE] == PSO_TBLDRV_CONFIG) {
+      //
+      // Config. descriptor is found, check its sub-descriptor to execute different checking routine.
+      //
+      if ((Buffer[PSO_DATA] == CONFIG_SPEEDLIMIT) && (ProceededPSOType == PSO_TBLDRV_SPEEDLIMIT)) {
+        if (MemPCheckTblDrvOverrideConfigSpeedLimit (NBPtr, &Buffer[PSO_DATA + 1])) {
+          ConfigMatched = TRUE;
+        }
+      } else if (Buffer[PSO_DATA] == CONFIG_DONT_CARE) {
+        ConfigMatched = TRUE;
+      } else {
+        if (MemPCheckTblDrvOverrideConfig (NBPtr, &Buffer[PSO_DATA + 1])) {
+          ConfigMatched = TRUE;
+          if ((Buffer[PSO_DATA] == CONFIG_RC2IBT) && (ProceededPSOType == PSO_TBLDRV_RC2_IBT)) {
+            NumOfReg = Buffer[PSO_DATA + 9];
+          }
+        }
+      }
+    }
+
+    if (ConfigMatched) {
+      //
+      // If config. is matched, parsing "Table Driven PSO" macros behinds this config. macro until PSO_END is reached.
+      //
+      PSOStartPtr = Buffer + (Buffer[PSO_LENGTH] + 2);
+      // Look for the current proceeded PSO type in PlatformMemoryConfiguration array.
+      while ((PSOStartPtr[PSO_TYPE] != PSO_END)) {
+        if (PSOStartPtr[PSO_TYPE] == PSO_TBLDRV_CONFIG) {
+          //
+          // If there is an additional config. macro existed, break this while loop,
+          // then check its content with real platform config. again.
+          // If matched, parsing "Table Driven PSO" macros behind it.
+          //
+          Buffer = PSOStartPtr;
+          FindNewConfig = TRUE;
+          break;
+        } else if (PSOStartPtr[PSO_TYPE] == PSO_TBLDRV_INVALID_TYPE) {
+          InvalidConfigDetected = TRUE;
+          break;
+        }
+
+        if (PSOStartPtr[PSO_TYPE] == ProceededPSOType) {
+          //
+          // Pre-set overriding Cs/Dimm map to "0xFF" for the types which are regardless of Cs/Dimm
+          // for the first time going through the overriding routines.
+          //
+          if (FirstGoThrough) {
+            RetVal = 0xFF;
+          }
+          switch (ProceededPSOType) {
+          case PSO_TBLDRV_SPEEDLIMIT :
+            MemPTblDrvOverrideSpeedLimit (NBPtr, &PSOStartPtr[PSO_DATA]);
+            break;
+
+          case PSO_TBLDRV_ODT_RTTNOM :
+          case PSO_TBLDRV_ODT_RTTWR :
+            // Mask off Cs overridng map to record which Cs has been overridden.
+            RetVal &= ~ MemPTblDrvOverrideODT (NBPtr, &PSOStartPtr[PSO_TYPE]);
+            // Indicate RetVal is inverted.
+            InvertRetVal = TRUE;
+            break;
+
+          case PSO_TBLDRV_ODTPATTERN :
+            MemPTblDrvOverrideODTPattern (NBPtr, &PSOStartPtr[PSO_DATA]);
+            break;
+
+          case PSO_TBLDRV_ADDRTMG :
+            NBPtr->ChannelPtr->DctAddrTmg = *(UINT32 *)&PSOStartPtr[PSO_DATA];
+            IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: AddrTmg = 0x%x for Dct%d\n\n", *(UINT32 *)&PSOStartPtr[PSO_DATA], NBPtr->Dct);
+            break;
+
+          case PSO_TBLDRV_ODCCTRL :
+            NBPtr->ChannelPtr->DctOdcCtl = *(UINT32 *)&PSOStartPtr[PSO_DATA];
+            IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: OdcCtl = 0x%x for Dct%d\n\n", *(UINT32 *)&PSOStartPtr[PSO_DATA], NBPtr->Dct);
+            break;
+
+          case PSO_TBLDRV_SLOWACCMODE :
+            NBPtr->ChannelPtr->SlowMode = (PSOStartPtr[PSO_DATA] == 1) ? TRUE : FALSE;
+            IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: Slow Access Mode = %d for Dct%d\n\n", PSOStartPtr[PSO_DATA], NBPtr->Dct);
+            break;
+
+          case PSO_TBLDRV_RC2_IBT :
+            // Mask off Dimm overridng map to record which Dimm has been overridden.
+            RetVal &= ~ MemPTblDrvOverrideRC2IBT (NBPtr, &PSOStartPtr[PSO_DATA], NumOfReg);
+            // Indicate RetVal is inverted.
+            InvertRetVal = TRUE;
+            break;
+
+          case PSO_TBLDRV_MR0_CL :
+            RetVal = 0;
+            if (MemPTblDrvOverrideMR0WR (NBPtr, &PSOStartPtr[PSO_DATA])) {
+              RetVal = 0xFF;
+            }
+            break;
+
+          case PSO_TBLDRV_MR0_WR :
+            RetVal = 0;
+            if (MemPTblDrvOverrideMR0CL (NBPtr, &PSOStartPtr[PSO_DATA])) {
+              RetVal = 0xFF;
+            }
+            break;
+
+          case PSO_TBLDRV_RC10_OPSPEED :
+            RetVal = 0;
+            if (MemPTblDrvOverrideMR10OpSpeed (NBPtr, &PSOStartPtr[PSO_DATA])) {
+              RetVal = 0xFF;
+            }
+            break;
+
+          case PSO_TBLDRV_LRDIMM_IBT :
+            NBPtr->PsPtr->F0RC8 = PSOStartPtr[PSO_DATA];
+            NBPtr->PsPtr->F1RC0 = PSOStartPtr[PSO_DATA + 1];
+            NBPtr->PsPtr->F1RC1 = PSOStartPtr[PSO_DATA + 2];
+            NBPtr->PsPtr->F1RC2 = PSOStartPtr[PSO_DATA + 3];
+            IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: LRDIMM IBT for Dct%d\n", NBPtr->Dct);
+            IDS_HDT_CONSOLE (MEM_FLOW, "\nF0RC8 = %d, F1RC0 = %d, F1RC1 = %d, F1RC2 = %d", PSOStartPtr[PSO_DATA], PSOStartPtr[PSO_DATA + 1], \
+                                        PSOStartPtr[PSO_DATA + 2], PSOStartPtr[PSO_DATA + 3]);
+            break;
+
+          case PSO_TBLDRV____TRAINING :
+            RetVal = 0x1;
+            NBPtr->Override__Training = (PSOStartPtr[PSO_DATA] == 1) ? TRUE : FALSE;
+            IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: Training = %d for Dct%d\n\n", PSOStartPtr[PSO_DATA], NBPtr->Dct);
+            break;
+
+          default:
+            ASSERT (FALSE);
+          }
+          FirstGoThrough = FALSE;
+        }
+         PSOStartPtr += (PSOStartPtr[PSO_LENGTH] + 2);
+      }
+
+      if (FindNewConfig) {
+        continue;
+      }
+      RetVal = (InvertRetVal) ? ~RetVal : RetVal;
+      RetVal16 = (UINT16) RetVal;
+      if (InvalidConfigDetected) {
+        RetVal16 |= INVALID_CONFIG_FLAG;
+      }
+
+      return RetVal16;
+    }
+     Buffer += (Buffer[PSO_LENGTH] + 2);
+  }
+
+  RetVal = (InvertRetVal) ? ~RetVal : RetVal;
+  RetVal16 = (UINT16) RetVal;
+  if (InvalidConfigDetected) {
+    RetVal16 |= INVALID_CONFIG_FLAG;
+  }
+  return RetVal16;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function overrides the speed limit.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *Buffer  - Pointer to Platform config table
+ *
+ */
+VOID
+STATIC
+MemPTblDrvOverrideSpeedLimit (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  UINT8 CurrentVoltage;
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: Max. Memory Speed for Dct%d\n", NBPtr->Dct);
+
+  LibAmdMemCopy (NBPtr->PsPtr->SpeedLimit, Buffer, 6, &(NBPtr->MemPtr->StdHeader));
+
+  for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "%s -> %dMHz\t", (CurrentVoltage == VOLT1_5_ENCODED_VAL) ? "1.5V" : ((CurrentVoltage == VOLT1_35_ENCODED_VAL) ? "1.35V" : "1.25V"), NBPtr->PsPtr->SpeedLimit[CurrentVoltage]);
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function overrides the ODTs (RttNom and RttWr).
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *Buffer  - Pointer to Platform config table
+ *
+ *     @return          Target CS overriding bit map
+ *
+ */
+UINT8
+STATIC
+MemPTblDrvOverrideODT (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  UINT16 i;
+  UINT8 TgtCS;
+
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: ODT for Dct%d\n", NBPtr->Dct);
+    if (Buffer[0] == PSO_TBLDRV_ODT_RTTNOM) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "RttNom = %d for ", Buffer[3]);
+    } else {
+      IDS_HDT_CONSOLE (MEM_FLOW, "RttWr = %d for ", Buffer[3]);
+    }
+  );
+
+  TgtCS = Buffer[2];
+  for (i = 0; i < MAX_CS_PER_CHANNEL; i++) {
+    if ((NBPtr->DCTPtr->Timings.CsEnabled & (UINT16) (1 << i)) != 0) {
+      if ((TgtCS & (UINT8) 1 << i) != 0) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "CS%d  ", i);
+        if (Buffer[0] == PSO_TBLDRV_ODT_RTTNOM) {
+          NBPtr->PsPtr->RttNom[i] = Buffer[3];
+        } else {
+          NBPtr->PsPtr->RttWr[i] = Buffer[3];
+        }
+      }
+    }
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+
+  return TgtCS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function overrides the ODT patterns.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *Buffer  - Pointer to Platform config table
+ *
+ */
+VOID
+STATIC
+MemPTblDrvOverrideODTPattern (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: ODT pattern for Dct%d\n", NBPtr->Dct);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nRODTCSHigh = 0x%x\n", *(UINT32 *)&Buffer[0]);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nRODTCSLow = 0x%x\n", *(UINT32 *)&Buffer[4]);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nWODTCSHigh = 0x%x\n", *(UINT32 *)&Buffer[8]);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nWODTCSLow = 0x%x\n", *(UINT32 *)&Buffer[12]);
+
+  CurrentChannel->PhyRODTCSHigh = *(UINT32 *)&Buffer[0];
+  CurrentChannel->PhyRODTCSLow = *(UINT32 *)&Buffer[4];
+  CurrentChannel->PhyWODTCSHigh = *(UINT32 *)&Buffer[8];
+  CurrentChannel->PhyWODTCSLow = *(UINT32 *)&Buffer[12];
+
+  //WL ODTs need to be modified as well while overriding...
+  CurrentChannel->PhyWLODT[0] = (UINT8) (CurrentChannel->PhyWODTCSLow & 0x0F);
+  CurrentChannel->PhyWLODT[1] = (UINT8) ((CurrentChannel->PhyWODTCSLow  >> 16) & 0x0F);
+  CurrentChannel->PhyWLODT[2] = (UINT8) (CurrentChannel->PhyWODTCSHigh & 0x0F);
+  CurrentChannel->PhyWLODT[3] = (UINT8) ((CurrentChannel->PhyWODTCSHigh >> 16) & 0x0F);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function overrides the Ctrl Word 2 and 8.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *Buffer  - Pointer to Platform config table
+ *     @param[in]       NumOfReg  - Number of registers
+ *
+ *     @return          Target DIMM overridng bit map
+ *
+ */
+UINT8
+STATIC
+MemPTblDrvOverrideRC2IBT (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer,
+  IN       UINT8 NumOfReg
+  )
+{
+  UINT16 i;
+  UINT8 TgtDimm;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: RC2[IBT] for Dct%d\n", NBPtr->Dct);
+  IDS_HDT_CONSOLE (MEM_FLOW, "RC2[IBT] = %d for ", Buffer[1]);
+
+  TgtDimm = Buffer[0];
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+    if ((CurrentChannel->ChDimmValid & (UINT16) (1 << i)) != 0) {
+      if (((TgtDimm & (UINT8) 1 << i) != 0) && (NBPtr->PsPtr->NumOfReg[i] == NumOfReg)) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "DIMM%d  ", i);
+        CurrentChannel->CtrlWrd02[i] = (Buffer[1] & 0x1) << 2;
+        CurrentChannel->CtrlWrd08[i] = (Buffer[1] & 0xE) >> 1;
+      }
+    }
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+
+  return TgtDimm;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function overrides MR0[WR].
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *Buffer  - Pointer to Platform config table
+ *
+ *     @return          TRUE : Overridden
+ *     @return          FALSE : Not overriden
+ *
+ */
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR0WR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  if (Buffer[0] == (UINT8) NBPtr->GetBitField (NBPtr, BFTcl)) {
+    NBPtr->PsPtr->MR0CL31 = Buffer[1];
+    NBPtr->PsPtr->MR0CL0 = Buffer[2];
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: MR0[CL][3:1] = %d,\tMR0[CL][0] = %d for Dct%d\n", \
+                                     Buffer[1], Buffer[2], NBPtr->Channel);
+    IDS_HDT_CONSOLE (MEM_FLOW, "Tcl = %d\n\n", (UINT8) NBPtr->GetBitField (NBPtr, BFTcl));
+    return TRUE;
+  }
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function overrides MR0[WR].
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *Buffer  - Pointer to Platform config table
+ *
+ *     @return          TRUE : Overridden
+ *     @return          FALSE : Not overriden
+ *
+ */
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR0CL (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  if (Buffer[0] == (UINT8) NBPtr->GetBitField (NBPtr, BFTwrDDR3)) {
+    NBPtr->PsPtr->MR0WR = Buffer[1];
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: MR0[WR] = %d for Dct%d\n", Buffer[1], NBPtr->Dct);
+    IDS_HDT_CONSOLE (MEM_FLOW, "Twr = %d\n\n", (UINT8) NBPtr->GetBitField (NBPtr, BFTwrDDR3));
+    return TRUE;
+  }
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function overrides MR10[OperatingSpeed].
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *Buffer  - Pointer to Platform config table
+ *
+ *     @return          TRUE : Overridden
+ *     @return          FALSE : Not overriden
+ *
+ */
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR10OpSpeed (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  UINT32 CurDDRrate;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+  CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+
+  if ((Buffer[0] & CurDDRrate) != 0) {
+    NBPtr->PsPtr->RC10OpSpd = Buffer[1];
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: MR10[OperatingSpeed] = %d for Dct%d\n", Buffer[1], NBPtr->Dct);
+    return TRUE;
+  }
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function checks if platform configuration is matched or not.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *Buffer  - Pointer to Platform config table
+ *
+ *     @return          TRUE : Configuration is matched
+ *     @return          FALSE : Configuration is not matched
+ *
+ */
+BOOLEAN
+STATIC
+MemPCheckTblDrvOverrideConfig (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  UINT8 MaxDimmPerCh;
+  UINT32 CurDDRrate;
+  UINT8 DDR3Voltage;
+  UINT16 RankTypeOfPopulatedDimm;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  // Get platform configuration.
+  MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+  DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+  RankTypeOfPopulatedDimm = MemAGetPsRankType (CurrentChannel);
+
+  if ((MaxDimmPerCh == Buffer[0]) && ((DDR3Voltage & Buffer[1]) != 0) &&
+    ((CurDDRrate & *(UINT32 *)&Buffer[2]) != 0) && ((RankTypeOfPopulatedDimm & *(UINT16 *)&Buffer[6]) != 0)) {
+    return TRUE;
+  }
+
+  return FALSE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function checks if platform configuration is matched or not.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *Buffer  - Pointer to Platform config table
+ *
+ *     @return          TRUE : Configuration is matched
+ *     @return          FALSE : Configuration is not matched
+ *
+ */
+BOOLEAN
+STATIC
+MemPCheckTblDrvOverrideConfigSpeedLimit (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 *Buffer
+  )
+{
+  UINT8 MaxDimmPerCh;
+  UINT8 NumOfSR;
+  UINT8 NumOfDR;
+  UINT8 NumOfQR;
+  UINT8 NumOfLRDimm;
+  UINT8 i;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+  NumOfSR = 0;
+  NumOfDR = 0;
+  NumOfQR = 0;
+  NumOfLRDimm = 0;
+
+  // Get platform configuration.
+  MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+    if ((CurrentChannel->DimmSRPresent & (UINT8) (1 << i)) != 0) {
+      NumOfSR += 1;
+    } else if ((CurrentChannel->DimmDrPresent & (UINT16) (1 << i)) != 0) {
+      NumOfDR += 1;
+    } else if ((CurrentChannel->DimmQrPresent & (UINT16) (1 << i)) != 0) {
+      if (i < 2) {
+        NumOfQR += 1;
+      }
+    } else if ((CurrentChannel->LrDimmPresent & (UINT16) (1 << i))) {
+      NumOfLRDimm += 1;
+    }
+  }
+
+  if ((Buffer[0] == MaxDimmPerCh) && (Buffer[1] == CurrentChannel->Dimms)) {
+    if (NBPtr->MCTPtr->Status[SbLrdimms] == TRUE) {
+      if (Buffer[5] == NumOfLRDimm) {
+        return TRUE;
+      }
+    } else {
+      if ((Buffer[2] == NumOfSR) && (Buffer[3] == NumOfDR) && (Buffer[4] == NumOfQR)) {
+        return TRUE;
+      }
+    }
+  }
+
+  return FALSE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mplribt.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mplribt.c
new file mode 100644
index 0000000000..a8e43e3d26
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mplribt.c
@@ -0,0 +1,206 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mplribt.c
+ *
+ * A sub-engine which extracts F0RC8, F1RC0, F1RC1 and F1RC2 value for LRDIMM configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52114 $ @e \$Date: 2011-05-02 13:21:20 -0600 (Mon, 02 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_MPLRIBT_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetLRIBT (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts LRDIMM F0RC8, F1RC0, F1RC1 and F1RC2 value from a input
+ *    table and stores extracted value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Succeed in extracting the table value
+ *     @return          FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPGetLRIBT (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 TableSize;
+  UINT32 CurDDRrate;
+  UINT8 DDR3Voltage;
+  UINT16 RankTypeOfPopulatedDimm;
+  UINT16 RankTypeInTable;
+  UINT8 PsoMaskLRIBT;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  PSCFG_L_IBT_ENTRY *TblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  if (CurrentChannel->LrDimmPresent == 0) {
+    return TRUE;
+  }
+
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to NB type and package type.
+  while (EntryOfTables->TblEntryOfLRIBT[i] != NULL) {
+    if (((EntryOfTables->TblEntryOfLRIBT[i])->Header.NumOfDimm & NOD) != 0) {
+      LogicalCpuid = (EntryOfTables->TblEntryOfLRIBT[i])->Header.LogicalCpuid;
+      PackageType = (EntryOfTables->TblEntryOfLRIBT[i])->Header.PackageType;
+      //
+      // Determine if this is the expected NB Type
+      //
+      if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+        TblPtr = (PSCFG_L_IBT_ENTRY *) ((EntryOfTables->TblEntryOfLRIBT[i])->TBLPtr);
+        TableSize = (EntryOfTables->TblEntryOfLRIBT[i])->TableSize;
+        break;
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfLRIBT[i] == NULL) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo LRDIMM IBT table\n");
+    return FALSE;
+  }
+
+  CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+  DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+  RankTypeOfPopulatedDimm = MemPGetPsRankType (CurrentChannel);
+
+  for (i = 0; i < TableSize; i++) {
+    MemPConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+    if (TblPtr->DimmPerCh == MaxDimmPerCh) {
+      if ((TblPtr->DDRrate & CurDDRrate) != 0) {
+        if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+          if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+            NBPtr->PsPtr->F0RC8 = (UINT8) TblPtr->F0RC8;
+            NBPtr->PsPtr->F1RC0 = (UINT8) TblPtr->F1RC0;
+            NBPtr->PsPtr->F1RC1 = (UINT8) TblPtr->F1RC1;
+            NBPtr->PsPtr->F1RC2 = (UINT8) TblPtr->F1RC2;
+            break;
+          }
+        }
+      }
+    }
+    TblPtr++;
+  }
+  //
+  // If there is no entry, check if overriding value existed. If not, return FALSE
+  //
+  PsoMaskLRIBT = (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_LRDIMM_IBT);
+  if ((PsoMaskLRIBT == 0) && (i == TableSize)) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo LRDIMM IBT entries\n");
+    PutEventLog (AGESA_ERROR, MEM_ERROR_LR_IBT_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+    if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+      ASSERT (FALSE);
+    }
+    return FALSE;
+  }
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mplrnlr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mplrnlr.c
new file mode 100644
index 0000000000..ed14c165f1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mplrnlr.c
@@ -0,0 +1,117 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mplrnlr.c
+ *
+ * A sub-engine which extracts F0RC13[NumLogicalRanks] value for LRDIMM configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52114 $ @e \$Date: 2011-05-02 13:21:20 -0600 (Mon, 02 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_MPLRNLR_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetLRNLR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts LRDIMM F0RC13[NumLogicalRanks] value from a input
+ *    table and stores extracted value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables    - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Succeed in extracting the table value
+ *     @return          FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPGetLRNLR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  return TRUE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mplrnpr.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mplrnpr.c
new file mode 100644
index 0000000000..bef6eba0f4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mplrnpr.c
@@ -0,0 +1,117 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mplrnpr.c
+ *
+ * A sub-engine which extracts F0RC13[NumPhysicalRanks] value for LRDIMM configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52114 $ @e \$Date: 2011-05-02 13:21:20 -0600 (Mon, 02 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_MPLRNPR_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetLRNPR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts LRDIMM F0RC13[NumPhysicalRanks] value from a input
+ *    table and stores extracted value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Succeed in extracting the table value
+ *     @return          FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPGetLRNPR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  return TRUE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpmaxfreq.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpmaxfreq.c
new file mode 100644
index 0000000000..4c93c10ebf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpmaxfreq.c
@@ -0,0 +1,303 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpmaxfreq.c
+ *
+ * A sub-engine which extracts max. frequency limit value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52790 $ @e \$Date: 2011-05-11 15:31:24 -0600 (Wed, 11 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_MPMAXFREQ_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+typedef struct {
+  UINT16 DimmPerCh:3;
+  UINT16 Dimms:3;
+  UINT16 SR:3;
+  UINT16 DR:3;
+  UINT16 QR:4;
+} CDNMaxFreq;
+
+typedef struct {
+  UINT16 DimmPerCh:3;
+  UINT16 Dimms:3;
+  UINT16 LR:10;
+} CDNLMaxFreq;
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetMaxFreqSupported (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts the value of max frequency supported from a input table and
+ *    compares it with DCTPtr->Timings.TargetSpeed
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Succeed in extracting the table value
+ *     @return          FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPGetMaxFreqSupported (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 TableSize;
+  PSCFG_TYPE Type;
+  UINT16 CDN;
+  UINT16 MaxFreqSupported;
+  UINT16 *SpeedArray;
+  UINT8 DDR3Voltage;
+  UINT8 CurrentVoltage;
+  DIMM_TYPE DimmType;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  PSCFG_MAXFREQ_ENTRY *TblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+  BOOLEAN DisDct;
+  UINT8 PsoMaskMaxFreq;
+  UINT16 PsoMaskMaxFreq16;
+  PSC_TBL_ENTRY **TblEntryOfMaxFreq;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  DisDct = FALSE;
+  Type = PSCFG_MAXFREQ;
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  SpeedArray = NULL;
+
+  MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  if (CurrentChannel->RegDimmPresent != 0) {
+    DimmType = RDIMM_TYPE;
+  } else if (CurrentChannel->SODimmPresent != 0) {
+    DimmType = SODIMM_TYPE;
+    if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_SOLDERED_DOWN_SODIMM_TYPE, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) {
+      DimmType = SODWN_SODIMM_TYPE;
+    }
+  } else if (CurrentChannel->LrDimmPresent != 0) {
+    DimmType = LRDIMM_TYPE;
+  } else {
+    DimmType = UDIMM_TYPE;
+  }
+
+  TblEntryOfMaxFreq = EntryOfTables->TblEntryOfMaxFreq;
+  IDS_OPTION_HOOK (IDS_GET_STRETCH_FREQUENCY_LIMIT, &TblEntryOfMaxFreq, &NBPtr->MemPtr->StdHeader);
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+  while (TblEntryOfMaxFreq[i] != NULL) {
+    if (((TblEntryOfMaxFreq[i])->Header.DimmType & DimmType) != 0) {
+      if (((TblEntryOfMaxFreq[i])->Header.NumOfDimm & NOD) != 0) {
+        //
+        // Determine if this is the expected NB Type
+        //
+        LogicalCpuid = (TblEntryOfMaxFreq[i])->Header.LogicalCpuid;
+        PackageType = (TblEntryOfMaxFreq[i])->Header.PackageType;
+        if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+          TblPtr = (PSCFG_MAXFREQ_ENTRY *) ((TblEntryOfMaxFreq[i])->TBLPtr);
+          TableSize = (TblEntryOfMaxFreq[i])->TableSize;
+          Type = (TblEntryOfMaxFreq[i])->Header.PSCType;
+          break;
+        }
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (TblEntryOfMaxFreq[i] == NULL) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nDCT %d: No MaxFreq table. This channel will be disabled.\n", NBPtr->Dct);
+    return FALSE;
+  }
+
+  MaxFreqSupported = UNSUPPORTED_DDR_FREQUENCY;
+  CDN = 0;
+  DDR3Voltage = (UINT8) CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage);
+
+  // Construct the condition value
+  ((CDNMaxFreq *)&CDN)->DimmPerCh = MaxDimmPerCh;
+  ((CDNMaxFreq *)&CDN)->Dimms = CurrentChannel->Dimms;
+  if (Type == PSCFG_MAXFREQ) {
+    for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+      if ((CurrentChannel->DimmSRPresent & (UINT8) (1 << i)) != 0) {
+        ((CDNMaxFreq *)&CDN)->SR += 1;
+      }
+      if ((CurrentChannel->DimmDrPresent & (UINT16) (1 << i)) != 0) {
+        ((CDNMaxFreq *)&CDN)->DR += 1;
+      }
+      if ((CurrentChannel->DimmQrPresent & (UINT16) (1 << i)) != 0) {
+        if (i < 2) {
+          ((CDNMaxFreq *)&CDN)->QR += 1;
+        }
+      }
+    }
+  } else {
+    ((CDNLMaxFreq *)&CDN)->LR = CurrentChannel->Dimms;
+  }
+
+  for (i = 0; i < TableSize; i++) {
+    if (CDN == ((Type == PSCFG_MAXFREQ) ? TblPtr->MAXFREQ_ENTRY.CDN :
+      ((PSCFG_LR_MAXFREQ_ENTRY *)TblPtr)->LR_MAXFREQ_ENTRY.CDN)) {
+      if (Type == PSCFG_MAXFREQ) {
+        SpeedArray = TblPtr->MAXFREQ_ENTRY.Speed;
+      } else {
+        SpeedArray = ((PSCFG_LR_MAXFREQ_ENTRY *)TblPtr)->LR_MAXFREQ_ENTRY.Speed;
+      }
+      break;
+    }
+    TblPtr++;
+  }
+
+  PsoMaskMaxFreq16 = MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_SPEEDLIMIT);
+  if ((PsoMaskMaxFreq16 & INVALID_CONFIG_FLAG) == 0) {
+    PsoMaskMaxFreq = (UINT8) PsoMaskMaxFreq16;
+    if (PsoMaskMaxFreq != 0) {
+      SpeedArray = NBPtr->PsPtr->SpeedLimit;
+    }
+  } else {
+    SpeedArray = NULL;
+  }
+
+  if (SpeedArray != NULL) {
+    if (NBPtr->SharedPtr->VoltageMap != VDDIO_DETERMINED) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\nCheck speed supported for each VDDIO for Node%d DCT%d: ", NBPtr->Node, NBPtr->Dct);
+      for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
+        if (NBPtr->SharedPtr->VoltageMap & (1 << CurrentVoltage)) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "%s -> %dMHz ", (CurrentVoltage == VOLT1_5_ENCODED_VAL) ? "1.5V" : ((CurrentVoltage == VOLT1_35_ENCODED_VAL) ? "1.35V" : "1.25V"), SpeedArray[CurrentVoltage]);
+          if (NBPtr->DCTPtr->Timings.TargetSpeed > SpeedArray[CurrentVoltage]) {
+            MaxFreqSupported = SpeedArray[CurrentVoltage];
+          } else {
+            MaxFreqSupported = NBPtr->DCTPtr->Timings.TargetSpeed;
+          }
+          if (NBPtr->MaxFreqVDDIO[CurrentVoltage] > MaxFreqSupported) {
+            NBPtr->MaxFreqVDDIO[CurrentVoltage] = MaxFreqSupported;
+          }
+        } else {
+          NBPtr->MaxFreqVDDIO[CurrentVoltage] = 0;
+        }
+      }
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+    }
+    ASSERT (DDR3Voltage <= VOLT1_25_ENCODED_VAL);
+    MaxFreqSupported = SpeedArray[DDR3Voltage];
+  }
+
+  if (MaxFreqSupported == UNSUPPORTED_DDR_FREQUENCY) {
+    // No entry in the table for current dimm population is found
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nDCT %d: No entry is found in the Max Frequency table\n", NBPtr->Dct);
+    DisDct = TRUE;
+  } else if (MaxFreqSupported != 0) {
+    if (NBPtr->DCTPtr->Timings.TargetSpeed > MaxFreqSupported) {
+      NBPtr->DCTPtr->Timings.TargetSpeed = MaxFreqSupported;
+    }
+  } else if (NBPtr->SharedPtr->VoltageMap == VDDIO_DETERMINED) {
+    // Dimm population is not supported at current voltage
+    // Also if there is no performance optimization, disable the DCT
+    DisDct = TRUE;
+  }
+
+  if (DisDct) {
+    NBPtr->DCTPtr->Timings.DimmExclude |= NBPtr->DCTPtr->Timings.DctDimmValid;
+    PutEventLog (AGESA_ERROR, MEM_ERROR_UNSUPPORTED_DIMM_CONFIG, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+    // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+    NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+  }
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpmr0.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpmr0.c
new file mode 100644
index 0000000000..78696b8225
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpmr0.c
@@ -0,0 +1,196 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpmr0.c
+ *
+ * A sub-engine which extracts MR0[WR] and MR0[CL] value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52114 $ @e \$Date: 2011-05-02 13:21:20 -0600 (Mon, 02 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_MPMR0_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetMR0WrCL (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts MR0[WR] or MR0[CL] value from a input table and store the
+ *    value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Succeed in extracting the table value
+ *     @return          FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPGetMR0WrCL (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+
+  UINT8 i;
+  UINT8 j;
+  UINT8 p;
+  UINT32 Value32;
+  UINT8 TableSize;
+  PSCFG_TYPE Type;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  UINT8 PsoMaskMR0;
+  PSCFG_MR0CL_ENTRY *TblPtr;
+  PSC_TBL_ENTRY **ptr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+  TblPtr = NULL;
+  TableSize = 0;
+  PsoMaskMR0 = 0;
+
+  // Extract MR0[WR] value, then MR0[CL] value
+  for (i = 0; i < 2; i++) {
+    if (i == 0) {
+      ptr = EntryOfTables->TblEntryOfMR0WR;
+      Type = PSCFG_MR0WR;
+    } else {
+      ptr = EntryOfTables->TblEntryOfMR0CL;
+      Type = PSCFG_MR0CL;
+    }
+
+    p = 0;
+    // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+    while (ptr[p] != NULL) {
+      //
+      // Determine if this is the expected NB Type
+      //
+      LogicalCpuid = (ptr[p])->Header.LogicalCpuid;
+      PackageType = (ptr[p])->Header.PackageType;
+      if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+        TblPtr = (PSCFG_MR0CL_ENTRY *) ((ptr[p])->TBLPtr);
+        TableSize = (ptr[p])->TableSize;
+        break;
+      }
+      p++;
+    }
+
+    // Check whether no table entry is found.
+    if (ptr[p] == NULL) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\nNo MR0 table\n");
+      return FALSE;
+    }
+
+    Value32 = (Type == PSCFG_MR0WR) ? NBPtr->GetBitField (NBPtr, BFTwrDDR3) : NBPtr->GetBitField (NBPtr, BFTcl);
+    for (j = 0; j < TableSize; j++, TblPtr++) {
+      if (Value32 == (UINT32) TblPtr->Timing) {
+        if (Type == PSCFG_MR0WR) {
+          NBPtr->PsPtr->MR0WR = (UINT8) TblPtr->Value;
+          break;
+        } else {
+          NBPtr->PsPtr->MR0CL31 = (UINT8) TblPtr->Value;
+          NBPtr->PsPtr->MR0CL0 = (UINT8) TblPtr->Value1;
+          break;
+        }
+      }
+    }
+
+    //
+    // If there is no entry, check if overriding value existed. If not, return FALSE.
+    //
+    PsoMaskMR0 = (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, ((i == 0) ? PSO_TBLDRV_MR0_WR : PSO_TBLDRV_MR0_CL));
+    if ((PsoMaskMR0 == 0) && (j == TableSize)) {
+      IDS_HDT_CONSOLE (MEM_FLOW, (i == 0) ? "\nNo MR0[WR] entries\n" : "\nNo MR0[CL] entries\n");
+      PutEventLog (AGESA_ERROR, MEM_ERROR_MR0_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+      if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+        ASSERT (FALSE);
+      }
+      return FALSE;
+    }
+  }
+
+  return TRUE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpodtpat.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpodtpat.c
new file mode 100644
index 0000000000..ec0017749d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpodtpat.c
@@ -0,0 +1,213 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpodtpat.c
+ *
+ * A sub-engine which extracts ODT pattern value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52114 $ @e \$Date: 2011-05-02 13:21:20 -0600 (Mon, 02 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_MPODTPAT_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetODTPattern (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts ODT Pattern value from a input table and stores extracted
+ *    value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Table values can be extracted per dimm population and ranks type.
+ *     @return          FALSE - Table values cannot be extracted per dimm population and ranks type.
+ *
+ */
+BOOLEAN
+MemPGetODTPattern (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT16 RankTypeInTable;
+  UINT16 RankTypeOfPopulatedDimm;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 TableSize;
+  DIMM_TYPE DimmType;
+  UINT8 PsoMaskOdtPat;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  PSCFG_3D_ODTPAT_ENTRY *TblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  if (CurrentChannel->RegDimmPresent != 0) {
+    DimmType = RDIMM_TYPE;
+  } else if (CurrentChannel->SODimmPresent != 0) {
+    DimmType = SODIMM_TYPE;
+  } else if (CurrentChannel->LrDimmPresent != 0) {
+    DimmType = LRDIMM_TYPE;
+  } else {
+    DimmType = UDIMM_TYPE;
+  }
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+  while (EntryOfTables->TblEntryOfODTPattern[i] != NULL) {
+    if (((EntryOfTables->TblEntryOfODTPattern[i])->Header.DimmType & DimmType) != 0) {
+      if (((EntryOfTables->TblEntryOfODTPattern[i])->Header.NumOfDimm & NOD) != 0) {
+        //
+        // Determine if this is the expected NB Type
+        //
+        LogicalCpuid = (EntryOfTables->TblEntryOfODTPattern[i])->Header.LogicalCpuid;
+        PackageType = (EntryOfTables->TblEntryOfODTPattern[i])->Header.PackageType;
+        if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+          TblPtr = (PSCFG_3D_ODTPAT_ENTRY *) ((EntryOfTables->TblEntryOfODTPattern[i])->TBLPtr);
+          TableSize = (EntryOfTables->TblEntryOfODTPattern[i])->TableSize;
+          break;
+        }
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfODTPattern[i] == NULL) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo ODT table\n");
+    return FALSE;
+  }
+
+  RankTypeOfPopulatedDimm = MemPGetPsRankType (CurrentChannel);
+
+  for (i = 0; i < TableSize; i++) {
+    MemPConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+    if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+      CurrentChannel->PhyRODTCSHigh = TblPtr->RdODTCSHigh;
+      CurrentChannel->PhyRODTCSLow = TblPtr->RdODTCSLow;
+      CurrentChannel->PhyWODTCSHigh = TblPtr->WrODTCSHigh;
+      CurrentChannel->PhyWODTCSLow = TblPtr->WrODTCSLow;
+
+      //WL ODT
+      CurrentChannel->PhyWLODT[0] = (UINT8) (CurrentChannel->PhyWODTCSLow & 0x0F);
+      CurrentChannel->PhyWLODT[1] = (UINT8) ((CurrentChannel->PhyWODTCSLow  >> 16) & 0x0F);
+      CurrentChannel->PhyWLODT[2] = (UINT8) (CurrentChannel->PhyWODTCSHigh & 0x0F);
+      CurrentChannel->PhyWLODT[3] = (UINT8) ((CurrentChannel->PhyWODTCSHigh >> 16) & 0x0F);
+
+      break;
+    }
+    TblPtr++;
+  }
+
+  //
+  // If there is no entry, check if overriding value existed. If not, return FALSE
+  //
+  PsoMaskOdtPat = (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_ODTPATTERN);
+  if ((PsoMaskOdtPat == 0) && (i == TableSize)) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo ODT entries\n");
+    PutEventLog (AGESA_ERROR, MEM_ERROR_ODT_PATTERN_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+    if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+      ASSERT (FALSE);
+    }
+    return FALSE;
+  }
+
+  return TRUE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mprc10opspd.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mprc10opspd.c
new file mode 100644
index 0000000000..662e99e7b3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mprc10opspd.c
@@ -0,0 +1,184 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mprc10opspd.c
+ *
+ * A sub-engine which extracts RC10 operating speed value for RDIMM configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52114 $ @e \$Date: 2011-05-02 13:21:20 -0600 (Mon, 02 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_MPRC10OPSPD_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetRC10OpSpd (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts RC10 operating speed value from a input table and stores extracted
+ *    value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Succeed in extracting the table value
+ *     @return          FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPGetRC10OpSpd (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT8 TableSize;
+  UINT32 CurDDRrate;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  UINT8 PsoMaskRC10OpSpeed;
+  PSCFG_OPSPD_ENTRY *TblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  if (CurrentChannel->RegDimmPresent == 0) {
+    return TRUE;
+  }
+
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to NB type and package type.
+  while (EntryOfTables->TblEntryOfRC10OpSpeed[i] != NULL) {
+    LogicalCpuid = (EntryOfTables->TblEntryOfRC10OpSpeed[i])->Header.LogicalCpuid;
+    PackageType = (EntryOfTables->TblEntryOfRC10OpSpeed[i])->Header.PackageType;
+    //
+    // Determine if this is the expected NB Type
+    //
+    if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+      TblPtr = (PSCFG_OPSPD_ENTRY *) ((EntryOfTables->TblEntryOfRC10OpSpeed[i])->TBLPtr);
+      TableSize = (EntryOfTables->TblEntryOfRC10OpSpeed[i])->TableSize;
+      break;
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfRC10OpSpeed[i] == NULL) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo RC10 Op Speed table\n");
+    return FALSE;
+  }
+
+  CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+
+  for (i = 0; i < TableSize; i++) {
+    if ((TblPtr->DDRrate & CurDDRrate) != 0) {
+      NBPtr->PsPtr->RC10OpSpd = TblPtr->OPSPD;
+      break;
+    }
+    TblPtr++;
+  }
+
+  //
+  // If there is no entry, check if overriding value existed. If not, return FALSE.
+  //
+  PsoMaskRC10OpSpeed = (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_RC10_OPSPEED);
+  if ((PsoMaskRC10OpSpeed == 0) && (i == TableSize)) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo RC10 Op Speed entries\n");
+    PutEventLog (AGESA_ERROR, MEM_ERROR_RC10_OP_SPEED_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+    if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+      ASSERT (FALSE);
+    }
+    return FALSE;
+  }
+
+  return TRUE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mprc2ibt.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mprc2ibt.c
new file mode 100644
index 0000000000..ee6771057d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mprc2ibt.c
@@ -0,0 +1,236 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mprc2ibt.c
+ *
+ * A sub-engine which extracts RC2[IBT] value for RDIMM configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52114 $ @e \$Date: 2011-05-02 13:21:20 -0600 (Mon, 02 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_MPRC2IBT_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetRC2IBT (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts RC2[IBT] value from a input table and stores extracted
+ *    value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables       Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Table values can be extracted for all present dimms/ranks
+ *     @return          FALSE - Table values cannot be extracted for all present dimms/ranks
+ *
+ */
+BOOLEAN
+MemPGetRC2IBT (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 DimmIndex;
+  UINT8 TableSize;
+  UINT32 CurDDRrate;
+  UINT8 DDR3Voltage;
+  UINT16 RankTypeOfPopulatedDimm;
+  UINT16 RankTypeInTable;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  UINT8 TgtDimmType;
+  UINT8 NumOfReg;
+  UINT8 PsoDimmMaskRc2Ibt;
+  UINT8 NoEntryDimmMask;
+  PSCFG_MR2IBT_ENTRY *TblPtr;
+  PSCFG_MR2IBT_ENTRY *OrgTblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  if (CurrentChannel->RegDimmPresent == 0) {
+    return TRUE;
+  }
+
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  NoEntryDimmMask = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to NB type and package type.
+  while (EntryOfTables->TblEntryOfRC2IBT[i] != NULL) {
+    if (((EntryOfTables->TblEntryOfRC2IBT[i])->Header.NumOfDimm & NOD) != 0) {
+      LogicalCpuid = (EntryOfTables->TblEntryOfRC2IBT[i])->Header.LogicalCpuid;
+      PackageType = (EntryOfTables->TblEntryOfRC2IBT[i])->Header.PackageType;
+      //
+      // Determine if this is the expected NB Type
+      //
+      if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+        TblPtr = (PSCFG_MR2IBT_ENTRY *) ((EntryOfTables->TblEntryOfRC2IBT[i])->TBLPtr);
+        TableSize = (EntryOfTables->TblEntryOfRC2IBT[i])->TableSize;
+        break;
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfRC2IBT[i] == NULL) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo RC2 IBT table\n");
+    return FALSE;
+  }
+
+  CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+  DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+  RankTypeOfPopulatedDimm = MemPGetPsRankType (CurrentChannel);
+
+  OrgTblPtr = TblPtr;
+  for (DimmIndex = 0; DimmIndex < MAX_DIMMS_PER_CHANNEL; DimmIndex++) {
+    TblPtr = OrgTblPtr;
+    NumOfReg = NBPtr->PsPtr->NumOfReg[DimmIndex];
+    if ((CurrentChannel->ChDimmValid & (UINT8) (1 << DimmIndex)) != 0) {
+      if ((CurrentChannel->DimmQrPresent & (UINT8) (1 << DimmIndex)) != 0) {
+        TgtDimmType = DIMM_QR;
+      } else if ((CurrentChannel->DimmDrPresent & (UINT8) (1 << DimmIndex)) != 0) {
+        TgtDimmType = DIMM_DR;
+      } else {
+        TgtDimmType = DIMM_SR;
+      }
+
+      for (i = 0; i < TableSize; i++) {
+        MemPConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+        if (TblPtr->DimmPerCh == MaxDimmPerCh) {
+          if ((TblPtr->DDRrate & CurDDRrate) != 0) {
+            if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+              if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+                if ((TblPtr->Dimm & TgtDimmType) != 0) {
+                  // If TblPtr->NumOfReg == 0x0F, that means the condition will be TRUE regardless of NumRegisters in DIMM
+                  if ((TblPtr->NumOfReg == 0xF) || (TblPtr->NumOfReg == NumOfReg)) {
+                    CurrentChannel->CtrlWrd02[DimmIndex] = (UINT8) ((TblPtr->IBT & 0x1) << 2);
+                    CurrentChannel->CtrlWrd08[DimmIndex] = (UINT8) ((TblPtr->IBT & 0xE) >> 1);
+                    break;
+                  }
+                }
+              }
+            }
+          }
+        }
+        TblPtr++;
+      }
+
+      if (i == TableSize) {
+        NoEntryDimmMask |= (UINT8) 1 << DimmIndex;
+      }
+    }
+  }
+
+  //
+  // If there are no entries for certain Dimm(s), check if overriding value existed for them. If not, return FALSE.
+  //
+  PsoDimmMaskRc2Ibt = (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_RC2_IBT);
+  if (NoEntryDimmMask != 0) {
+    if ((NoEntryDimmMask & PsoDimmMaskRc2Ibt) != NoEntryDimmMask) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\nNo RC2 IBT entries\n");
+      PutEventLog (AGESA_ERROR, MEM_ERROR_RC2_IBT_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+      if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+        ASSERT (FALSE);
+      }
+      return FALSE;
+    }
+  }
+
+  return TRUE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mprtt.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mprtt.c
new file mode 100644
index 0000000000..73bb81796b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mprtt.c
@@ -0,0 +1,270 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mprtt.c
+ *
+ * A sub-engine which extracts RttNom and RttWr (Dram Term and Dynamic Dram Term) value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_MPRTT_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define _DONT_CARE 0xFF
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetRttNomWr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts RttNom and RttWr value from a input table and stores extracted
+ *    value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Table values can be extracted for all present dimms/ranks
+ *     @return          FALSE - Table values cannot be extracted for all present dimms/ranks
+ *
+ */
+BOOLEAN
+MemPGetRttNomWr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 TableSize;
+  UINT32 CurDDRrate;
+  UINT8 DDR3Voltage;
+  UINT16 RankTypeOfPopulatedDimm;
+  UINT16 RankTypeInTable;
+  DIMM_TYPE DimmType;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  UINT8 TgtDimmType;
+  UINT8 TgtRank;
+  UINT8 Chipsel;
+  UINT8 PsoCsMaskRtt;
+  UINT16 PsoCsMaskRtt16;
+  UINT8 NoEntryCsMask;
+  PSCFG_RTT_ENTRY *TblPtr;
+  PSCFG_RTT_ENTRY *OrgTblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  PsoCsMaskRtt = 0;
+  NoEntryCsMask = 0;
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  if (CurrentChannel->RegDimmPresent != 0) {
+    DimmType = RDIMM_TYPE;
+  } else if (CurrentChannel->SODimmPresent != 0) {
+    DimmType = SODIMM_TYPE;
+    if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_SOLDERED_DOWN_SODIMM_TYPE, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) {
+      DimmType = SODWN_SODIMM_TYPE;
+    }
+  } else if (CurrentChannel->LrDimmPresent != 0) {
+    DimmType = LRDIMM_TYPE;
+  } else {
+    DimmType = UDIMM_TYPE;
+  }
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+  while (EntryOfTables->TblEntryOfDramTerm[i] != NULL) {
+    if (((EntryOfTables->TblEntryOfDramTerm[i])->Header.DimmType & DimmType) != 0) {
+      if (((EntryOfTables->TblEntryOfDramTerm[i])->Header.NumOfDimm & NOD) != 0) {
+        //
+        // Determine if this is the expected NB Type
+        //
+        LogicalCpuid = (EntryOfTables->TblEntryOfDramTerm[i])->Header.LogicalCpuid;
+        PackageType = (EntryOfTables->TblEntryOfDramTerm[i])->Header.PackageType;
+        if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+          TblPtr = (PSCFG_RTT_ENTRY *) ((EntryOfTables->TblEntryOfDramTerm[i])->TBLPtr);
+          TableSize = (EntryOfTables->TblEntryOfDramTerm[i])->TableSize;
+          break;
+        }
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfDramTerm[i] == NULL) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo RTT table\n");
+    return FALSE;
+  }
+
+  CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+  DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+  RankTypeOfPopulatedDimm = MemPGetPsRankType (CurrentChannel);
+
+  OrgTblPtr = TblPtr;
+  for (Chipsel = 0; Chipsel < MAX_CS_PER_CHANNEL; Chipsel++) {
+    TblPtr = OrgTblPtr;
+    if ((NBPtr->DCTPtr->Timings.CsPresent & (UINT16) (1 << Chipsel)) != 0) {
+      if ((CurrentChannel->DimmQrPresent & (UINT8) (1 << (Chipsel >> 1))) != 0) {
+        TgtDimmType = DIMM_QR;
+        TgtRank = (UINT8) ((Chipsel < 4) ? 1 << (Chipsel & 1) : 4 << (Chipsel & 1));
+      } else if ((CurrentChannel->DimmDrPresent & (UINT8) (1 << (Chipsel >> 1))) != 0) {
+        TgtDimmType = DIMM_DR;
+        TgtRank = (UINT8) 1 << (Chipsel & 1);
+      } else {
+        TgtDimmType = DIMM_SR;
+        TgtRank = (UINT8) 1 << (Chipsel & 1);
+      }
+
+      if (DimmType == LRDIMM_TYPE) {
+        TgtDimmType = _DONT_CARE;
+        TgtRank = _DONT_CARE;
+      }
+
+      for (i = 0; i < TableSize; i++) {
+        MemPConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+        if (TblPtr->DimmPerCh == MaxDimmPerCh) {
+          if ((TblPtr->DDRrate & CurDDRrate) != 0) {
+            if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+              if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+                if (((TblPtr->Dimm & TgtDimmType) != 0) || (TgtDimmType == _DONT_CARE)) {
+                  if (((TblPtr->Rank & TgtRank) != 0) || (TgtRank == _DONT_CARE)) {
+                    NBPtr->PsPtr->RttNom[Chipsel] = (UINT8) TblPtr->RttNom;
+                    NBPtr->PsPtr->RttWr[Chipsel] = (UINT8) TblPtr->RttWr;
+                    break;
+                  }
+                }
+              }
+            }
+          }
+        }
+        TblPtr++;
+      }
+      // Record which Cs(s) have no entries. Later on, we will check if there are overriding values for them.
+      if ((i == TableSize) && (NBPtr->SharedPtr->VoltageMap == VDDIO_DETERMINED)) {
+        NoEntryCsMask |= (UINT8) 1 << Chipsel;
+      }
+    }
+  }
+
+  PsoCsMaskRtt16 = MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_ODT_RTTNOM);
+  PsoCsMaskRtt16 &= MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_ODT_RTTWR);
+  //
+  // Check to see if invalid entry exist ?
+  //
+  if ((PsoCsMaskRtt16 & INVALID_CONFIG_FLAG) != 0) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nInvalid entry is found\n\n");
+    return FALSE;
+  }
+
+  //
+  // If there are no entries for certain Cs(s), we need to check if overriding values (both RttNom and RttWr) existed for them.
+  // Otherwise, return FALSE.
+  //
+  PsoCsMaskRtt = (UINT8) PsoCsMaskRtt16;
+  if (NoEntryCsMask != 0) {
+    if ((PsoCsMaskRtt & NoEntryCsMask) != NoEntryCsMask) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\nNo Rtt entries\n");
+      PutEventLog (AGESA_ERROR, MEM_ERROR_RTT_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+      if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+        ASSERT (FALSE);
+      }
+      return FALSE;
+    }
+  }
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mps2d.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mps2d.c
new file mode 100644
index 0000000000..5d762a9ce6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mps2d.c
@@ -0,0 +1,220 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mps2d.c
+ *
+ * A sub-engine determine which configs should use training.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 45233 $ @e \$Date: 2011-01-13 21:58:29 -0600 (Thu, 13 Jan 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_MPS___FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetS__ (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which determine if training should be run
+ *    from a input table
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Table values can be extracted per dimm population and ranks type.
+ *     @return          FALSE - Table values cannot be extracted per dimm population and ranks type.
+ *
+ */
+BOOLEAN
+MemPGetS__ (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+
+  UINT8 i;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 TableSize;
+  UINT32 CurDDRrate;
+  UINT8 DDR3Voltage;
+  UINT16 RankTypeOfPopulatedDimm;
+  UINT16 RankTypeInTable;
+  BOOLEAN FoundValue;
+  DIMM_TYPE DimmType;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  PSCFG_S___ENTRY *TblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+  UINT16 P__TraingOveride;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  if (CurrentChannel->RegDimmPresent != 0) {
+    DimmType = RDIMM_TYPE;
+  } else if (CurrentChannel->SODimmPresent != 0) {
+    DimmType = SODIMM_TYPE;
+    if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_SOLDERED_DOWN_SODIMM_TYPE, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) {
+      DimmType = SODWN_SODIMM_TYPE;
+    }
+  } else if (CurrentChannel->LrDimmPresent != 0) {
+    DimmType = LRDIMM_TYPE;
+  } else {
+    DimmType = UDIMM_TYPE;
+  }
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+  while (EntryOfTables->TblEntryOfS__[i] != NULL) {
+    if (((EntryOfTables->TblEntryOfS__[i])->Header.DimmType & DimmType) != 0) {
+      if (((EntryOfTables->TblEntryOfS__[i])->Header.NumOfDimm & NOD) != 0) {
+        //
+        // Determine if this is the expected NB Type
+        //
+        LogicalCpuid = (EntryOfTables->TblEntryOfS__[i])->Header.LogicalCpuid;
+        PackageType = (EntryOfTables->TblEntryOfS__[i])->Header.PackageType;
+        if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+          TblPtr = (PSCFG_S___ENTRY *) ((EntryOfTables->TblEntryOfS__[i])->TBLPtr);
+          TableSize = (EntryOfTables->TblEntryOfS__[i])->TableSize;
+          break;
+        }
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfS__[i] == NULL) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo training Config table\n");
+    return FALSE;
+  }
+  CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+  DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+  RankTypeOfPopulatedDimm = MemPGetPsRankType (CurrentChannel);
+  FoundValue = FALSE;
+  for (i = 0; i < TableSize; i++) {
+    MemPConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+    if (TblPtr->DimmPerCh == MaxDimmPerCh) {
+      if ((TblPtr->DDRrate & CurDDRrate) != 0) {
+        if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+          if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+            if (TblPtr->Enable__ == 1) {
+              FoundValue = TRUE;
+              break;
+            }
+          }
+        }
+      }
+    }
+    TblPtr++;
+  }
+  P__TraingOveride = MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV____TRAINING);
+  if (P__TraingOveride != 0) {
+    if (NBPtr->Override__Training) {
+      FoundValue = TRUE;
+    } else {
+      FoundValue = FALSE;
+    }
+  }
+  //
+  // If there is no entry, check if overriding training existed. If not, show no entry found.
+  //
+  if (FoundValue == FALSE || ((P__TraingOveride & INVALID_CONFIG_FLAG) != 0)) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo training config entries\n");
+    return FALSE;
+  } else {
+    return TRUE;
+  }
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpsao.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpsao.c
new file mode 100644
index 0000000000..b8cf2d9edc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpsao.c
@@ -0,0 +1,227 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpsao.c
+ *
+ * A sub-engine which extracts Slow access mode, Address timing and Output driver compensation value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_MPSAO_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetSAO (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts Slow mode, Address timing and Output driver compensation value
+ *    from a input table and store those value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Table values can be extracted per dimm population and ranks type.
+ *     @return          FALSE - Table values cannot be extracted per dimm population and ranks type.
+ *
+ */
+BOOLEAN
+MemPGetSAO (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+
+  UINT8 i;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 TableSize;
+  UINT32 CurDDRrate;
+  UINT8 DDR3Voltage;
+  UINT16 RankTypeOfPopulatedDimm;
+  UINT16 RankTypeInTable;
+  UINT8 PsoMaskSAO;
+  DIMM_TYPE DimmType;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  PSCFG_SAO_ENTRY *TblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  if (CurrentChannel->RegDimmPresent != 0) {
+    DimmType = RDIMM_TYPE;
+  } else if (CurrentChannel->SODimmPresent != 0) {
+    DimmType = SODIMM_TYPE;
+    if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_SOLDERED_DOWN_SODIMM_TYPE, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) {
+      DimmType = SODWN_SODIMM_TYPE;
+    }
+  } else if (CurrentChannel->LrDimmPresent != 0) {
+    DimmType = LRDIMM_TYPE;
+  } else {
+    DimmType = UDIMM_TYPE;
+  }
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+  while (EntryOfTables->TblEntryOfSAO[i] != NULL) {
+    if (((EntryOfTables->TblEntryOfSAO[i])->Header.DimmType & DimmType) != 0) {
+      if (((EntryOfTables->TblEntryOfSAO[i])->Header.NumOfDimm & NOD) != 0) {
+        //
+        // Determine if this is the expected NB Type
+        //
+        LogicalCpuid = (EntryOfTables->TblEntryOfSAO[i])->Header.LogicalCpuid;
+        PackageType = (EntryOfTables->TblEntryOfSAO[i])->Header.PackageType;
+        if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+          TblPtr = (PSCFG_SAO_ENTRY *) ((EntryOfTables->TblEntryOfSAO[i])->TBLPtr);
+          TableSize = (EntryOfTables->TblEntryOfSAO[i])->TableSize;
+          break;
+        }
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfSAO[i] == NULL) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo SlowAccMode, AddrTmg and ODCCtrl  table\n");
+    return FALSE;
+  }
+
+  CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+  DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+  RankTypeOfPopulatedDimm = MemPGetPsRankType (CurrentChannel);
+
+  for (i = 0; i < TableSize; i++) {
+    MemPConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+    if (TblPtr->DimmPerCh == MaxDimmPerCh) {
+      if ((TblPtr->DDRrate & CurDDRrate) != 0) {
+        if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+          if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+            CurrentChannel->DctAddrTmg = TblPtr->AddTmgCtl;
+            CurrentChannel->DctOdcCtl = TblPtr->ODC;
+            CurrentChannel->SlowMode = (TblPtr->SlowMode == 1) ? TRUE : FALSE;
+            break;
+          }
+        }
+      }
+    }
+    TblPtr++;
+  }
+
+  //
+  // If there is no entry, check if overriding values (SlowAccMode, AddrTmg and ODCCtrl) existed. If not, show no entry found.
+  //
+  PsoMaskSAO = (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_SLOWACCMODE);
+  PsoMaskSAO &= (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_ODCCTRL);
+  PsoMaskSAO &= (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_ADDRTMG);
+  if ((PsoMaskSAO == 0) && (i == TableSize)) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo SlowAccMode, AddrTmg and ODCCtrl entries\n");
+  } else {
+    return TRUE;
+  }
+
+  if (NBPtr->SharedPtr->VoltageMap != VDDIO_DETERMINED) {
+    return TRUE;
+  }
+
+  PutEventLog (AGESA_ERROR, MEM_ERROR_SAO_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+  SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+  if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+    ASSERT (FALSE);
+  }
+  return FALSE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpseeds.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpseeds.c
new file mode 100644
index 0000000000..c5450f1e0c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Ps/mpseeds.c
@@ -0,0 +1,211 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpseeds.c
+ *
+ * A sub-engine extracts WL and HW RxEn seeds from PSCFG tables.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 45233 $ @e \$Date: 2011-01-13 21:58:29 -0600 (Thu, 13 Jan 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_MPSEEDS_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetTrainingSeeds (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function extracts WL and HW RxEn seeds from PSCFG tables
+ *    from a input table
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          NBPtr->PsPtr->WLSeedVal
+ *     @return          NBPtr->PsPtr->HWRxENSeedVal
+ *
+ */
+BOOLEAN
+MemPGetTrainingSeeds (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+
+  UINT8 i;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 TableSize;
+  DIMM_TYPE DimmType;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  UINT8 Seedloop;
+  UINT8 CH;
+  PSC_TBL_ENTRY **TblEntryPtr;
+  PSCFG_SEED_ENTRY *TblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+  TblEntryPtr = NULL;
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+  CH = 1 << (CurrentChannel->ChannelID);
+
+  if (CurrentChannel->RegDimmPresent != 0) {
+    DimmType = RDIMM_TYPE;
+  } else if (CurrentChannel->SODimmPresent != 0) {
+    DimmType = SODIMM_TYPE;
+    if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_SOLDERED_DOWN_SODIMM_TYPE, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) {
+      DimmType = SODWN_SODIMM_TYPE;
+    }
+  } else if (CurrentChannel->LrDimmPresent != 0) {
+    DimmType = LRDIMM_TYPE;
+  } else {
+    DimmType = UDIMM_TYPE;
+  }
+
+  // Get seed value of WL, then HW RxEn
+  for (Seedloop = 0; Seedloop < 2; Seedloop++) {
+    TblEntryPtr = (Seedloop == 0) ? EntryOfTables->TblEntryOfWLSeed : EntryOfTables->TblEntryOfHWRxENSeed;
+
+    i = 0;
+    // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+    while (TblEntryPtr[i] != NULL) {
+      if (((TblEntryPtr[i])->Header.DimmType & DimmType) != 0) {
+        //
+        // Determine if this is the expected NB Type
+        //
+        LogicalCpuid = (TblEntryPtr[i])->Header.LogicalCpuid;
+        PackageType = (TblEntryPtr[i])->Header.PackageType;
+        if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+          TblPtr = (PSCFG_SEED_ENTRY *) ((TblEntryPtr[i])->TBLPtr);
+          TableSize = (TblEntryPtr[i])->TableSize;
+          break;
+        }
+      }
+      i++;
+    }
+
+    // Check whether no table entry is found.
+    if (TblEntryPtr[i] == NULL) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\nNo %s training seeds Config table\n", (Seedloop == 0) ? "WL" : "HW RxEn");
+      return FALSE;
+    }
+
+    for (i = 0; i < TableSize; i++) {
+      if ((TblPtr->DimmPerCh & NOD) != 0) {
+        if ((TblPtr->Channel & CH) != 0) {
+          if (Seedloop == 0) {
+            NBPtr->PsPtr->WLSeedVal = (UINT8) TblPtr->SeedVal;
+          } else {
+            NBPtr->PsPtr->HWRxENSeedVal = TblPtr->SeedVal;
+          }
+          break;
+        }
+      }
+      TblPtr++;
+    }
+
+    if (i == TableSize) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\nNo %s seed entries\n\n", (Seedloop == 0) ? "WL" : "HW RxEn");
+      PutEventLog (AGESA_ERROR, MEM_ERROR_TRAINING_SEED_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+      if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+        ASSERT (FALSE);
+      }
+      return FALSE;
+    }
+  }
+
+  return TRUE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mt2.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mt2.c
new file mode 100644
index 0000000000..f2a5bc4834
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mt2.c
@@ -0,0 +1,233 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt2.c
+ *
+ * Common Technology  functions for DDR2
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR2)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "AdvancedApi.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mt2.h"
+#include "mtspd2.h"
+#include "mtot2.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/* features */
+#include "mftds.h"
+#define FILECODE PROC_MEM_TECH_DDR2_MT2_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function Constructs the technology block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+BOOLEAN
+MemConstructTechBlock2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  TECHNOLOGY_TYPE *TechTypePtr;
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 i;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT8 DimmSlots;
+
+  TechTypePtr = (TECHNOLOGY_TYPE *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MEM_TECH, NBPtr->MCTPtr->SocketId, 0, 0, NULL, NULL);
+  if (TechTypePtr != NULL) {
+    // Ensure the platform override value is valid
+    ASSERT ((*TechTypePtr == DDR3_TECHNOLOGY) || (*TechTypePtr == DDR2_TECHNOLOGY));
+    if (*TechTypePtr != DDR2_TECHNOLOGY) {
+      return FALSE;
+    }
+  }
+
+
+  TechPtr->NBPtr = NBPtr;
+  TechPtr->RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  TechPtr->NBPtr = NBPtr;
+  TechPtr->RefPtr = NBPtr->RefPtr;
+
+  TechPtr->SetDramMode = MemTSetDramMode2;
+  TechPtr->DimmPresence = MemTDIMMPresence2;
+  TechPtr->SpdCalcWidth = MemTSPDCalcWidth2;
+  TechPtr->SpdGetTargetSpeed = MemTSPDGetTargetSpeed2;
+  TechPtr->AutoCycTiming = MemTAutoCycTiming2;
+  TechPtr->SpdSetBanks = MemTSPDSetBanks2;
+  TechPtr->SetDqsEccTmgs = MemTSetDQSEccTmgs;
+  TechPtr->GetCSIntLvAddr = MemTGetCSIntLvAddr2;
+  TechPtr->AdjustTwrwr = MemTAdjustTwrwr2;
+  TechPtr->AdjustTwrrd = MemTAdjustTwrrd2;
+  TechPtr->GetDimmSpdBuffer = MemTGetDimmSpdBuffer2;
+  TechPtr->GetLD = MemTGetLD2;
+  TechPtr->MaxFilterDly = 0;
+
+  //
+  // Map the Logical Dimms on this channel to the SPD that should be used for that logical DIMM.
+  // The pointers to the DIMM SPD information is as follows (2 Dimm/Ch and 3 Dimm/Ch examples).
+  //
+  //    DIMM Spd Buffer                          Current Channel DimmSpdPtr[MAX_DIMMS_PER_CHANNEL] array
+  //    (Number of dimms varies by platform)     (Array size is determined in AGESA.H) Dimm operations loop
+  //                                              on this array only)
+  //    2 DIMMS PER CHANNEL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1 SR/DR DIMM <--------------DimmSpdPtr[1]
+  //                                                         DimmSpdPtr[2]------->NULL
+  //                                                         DimmSpdPtr[3]------->NULL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1    QR DIMM <---------+----DimmSpdPtr[1]
+  //                                                    |    DimmSpdPtr[2]------->NULL
+  //                                                    +----DimmSpdPtr[3]
+  //
+  //    Socket N  Channel N Dimm 0    QR DIMM <-----+--------DimmSpdPtr[0]
+  //                        Dimm 1    QR DIMM <-----|---+----DimmSpdPtr[1]
+  //                                                +-- | ---DimmSpdPtr[2]
+  //                                                    +----DimmSpdPtr[3]
+  //
+  //    3 DIMMS PER CHANNEL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1 SR/DR DIMM <--------------DimmSpdPtr[1]
+  //                        Dimm 3 SR/DR DIMM <--------------DimmSpdPtr[2]
+  //                                                         DimmSpdPtr[3]------->NULL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1    QR DIMM <---------+----DimmSpdPtr[1]
+  //                        Dimm 3 SR/DR DIMM <-------- | ---DimmSpdPtr[2]
+  //                                                    +----DimmSpdPtr[3]
+  //
+  //
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+    for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+      NBPtr->SwitchChannel (NBPtr, Channel);
+      ChannelPtr = NBPtr->ChannelPtr;
+      ChannelPtr->TechType = DDR2_TECHNOLOGY;
+      ChannelPtr->MCTPtr = MCTPtr;
+      ChannelPtr->DCTPtr = DCTPtr;
+
+      DimmSlots = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                         MCTPtr->SocketId,
+                                         NBPtr->GetSocketRelativeChannel (NBPtr, Dct, Channel)
+                                        );
+      //
+      // Initialize the SPD pointers for each Dimm
+      //
+      for (i = 0 ; i < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0])) ; i++) {
+        ChannelPtr->DimmSpdPtr[i] = NULL;
+      }
+      for (i = 0 ; i < DimmSlots; i++) {
+        ChannelPtr->DimmSpdPtr[i] = &(ChannelPtr->SpdPtr[i]);
+        if ( (i + 2) < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0]))) {
+          if (ChannelPtr->DimmSpdPtr[i]->DimmPresent) {
+            if ((((ChannelPtr->DimmSpdPtr[i]->Data[SPD_DM_BANKS] >> 3) & 0x07) + 1) > 2) {
+              ChannelPtr->DimmSpdPtr[i + 2] = &(ChannelPtr->SpdPtr[i]);
+            }
+          }
+        }
+      }
+    }
+  }
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mt2.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mt2.h
new file mode 100644
index 0000000000..54cac5dc40
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mt2.h
@@ -0,0 +1,125 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt2.h
+ *
+ * Common Technology
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR2)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MT2_H_
+#define _MT2_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemConstructTechBlock2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemTSetDramMode2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTDIMMPresence2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSPDCalcWidth2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSPDGetTargetSpeed2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTAutoCycTiming2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSPDSetBanks2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTGetCSIntLvAddr2 (
+  IN       UINT8 BankEnc,
+  OUT      UINT8 *LowBit,
+  OUT      UINT8 *HiBit
+  );
+
+BOOLEAN
+MemTGetDimmSpdBuffer2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT8 **SpdBuffer,
+  IN       UINT8 Dimm
+  );
+
+#endif  /* _MT2_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtot2.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtot2.c
new file mode 100644
index 0000000000..8d4503b4d8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtot2.c
@@ -0,0 +1,163 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtot2.c
+ *
+ * Technology Non-SPD Timings for DDR2
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR2)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mtot2.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_DDR2_MTOT2_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function adjusts the Twrwr value for DDR2.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTAdjustTwrwr2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  DCT_STRUCT *DCTPtr;
+
+  DCTPtr = TechPtr->NBPtr->DCTPtr;
+
+  // For DDR2, 1 clock has encoded value of 0.
+  // Need to transfer clk value to encoded value.
+  if (DCTPtr->Timings.Twrwr >= 1) {
+    DCTPtr->Timings.Twrwr -= 1;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function adjusts the Twrrd value for DDR2.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTAdjustTwrrd2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  DCT_STRUCT *DCTPtr;
+
+  DCTPtr = TechPtr->NBPtr->DCTPtr;
+
+  // For DDR2, 1 clock has encoded value of 0.
+  // Need to transfer clk value to encoded value.
+  if (DCTPtr->Timings.Twrrd >= 1) {
+    DCTPtr->Timings.Twrrd -= 1;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets the LD value for DDR2
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  value of LD
+ */
+
+INT8
+MemTGetLD2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  INT8 LD;
+
+  // For DDR2, LD is always one clock (For DDR2, Tcwl is always Tcl minus 1).
+  LD = 1;
+
+  return LD;
+}
+
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtot2.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtot2.h
new file mode 100644
index 0000000000..2dda044640
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtot2.h
@@ -0,0 +1,89 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtot2.h
+ *
+ * Technology Non-SPD timings for DDR2
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR2)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTOT2_H_
+#define _MTOT2_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+MemTAdjustTwrwr2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTAdjustTwrrd2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+INT8
+MemTGetLD2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+#endif  /* _MTOT2_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtspd2.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtspd2.c
new file mode 100644
index 0000000000..b75f9279d1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtspd2.c
@@ -0,0 +1,1118 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtspd2.c
+ *
+ * Technology SPD supporting functions for DDR2
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR2)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "mt2.h"
+#include "mtspd2.h"
+#include "mftds.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_DDR2_MTSPD2_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+UINT8
+STATIC
+MemTSPDGetTCL2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+STATIC
+MemTSysCapability2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 k,
+  IN       UINT16 j
+  );
+
+BOOLEAN
+STATIC
+MemTDimmSupports2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 k,
+  IN       UINT8 j,
+  IN       UINT8 i
+  );
+
+UINT8
+STATIC
+MemTGetTk2 (
+  IN       UINT8 k
+  );
+
+UINT8
+STATIC
+MemTGetBankAddr2 (
+  IN       UINT8 k
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the DRAM mode
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - indicates that the DRAM mode is set to DDR2
+ */
+
+BOOLEAN
+MemTSetDramMode2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFLegacyBiosMode, 0);
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function determines if DIMMs are present. It checks checksum and interrogates the SPDs
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTDIMMPresence2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 *SpdBufferPtr;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  MEM_NB_BLOCK *NBPtr;
+  UINT16 Checksum;
+  UINT16 Value16;
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 i;
+  UINT8 ByteNum;
+  UINT8 Devwidth;
+  UINT8 Value8;
+  UINT8 MaxDimms;
+  UINT8 DimmSlots;
+  UINT16 DimmMask;
+  BOOLEAN SPDCtrl;
+
+  NBPtr = TechPtr->NBPtr;
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  SPDCtrl = UserOptions.CfgIgnoreSpdChecksum;
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+    for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+      NBPtr->SwitchChannel (NBPtr, Channel);
+      ChannelPtr = NBPtr->ChannelPtr;
+      ChannelPtr->DimmQrPresent = 0;
+
+      //  Get the maximum number of DIMMs
+      DimmSlots = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration,
+                                         MCTPtr->SocketId,
+                                         NBPtr->GetSocketRelativeChannel (NBPtr, Dct, Channel)
+                                        );
+      MaxDimms = MAX_DIMMS_PER_CHANNEL;
+      for (i = 0; i < MaxDimms; i++) {
+        //  Bitmask representing dimm #i.
+        DimmMask = (UINT16)1 << i;
+
+        if ((ChannelPtr->DimmQrPresent & DimmMask) || (i < DimmSlots)) {
+          if (MemTGetDimmSpdBuffer2 (TechPtr, &SpdBufferPtr, i)) {
+            MCTPtr->DimmPresent |= DimmMask;
+
+            //  Start by computing checksum for this SPD
+            Checksum = 0;
+            for (ByteNum = 0; ByteNum < SPD_CHECKSUM; ByteNum++) {
+              Checksum = Checksum + (UINT16) SpdBufferPtr[ByteNum];
+            }
+            //  Check for valid checksum value
+            AGESA_TESTPOINT (TpProcMemSPDChecking, &(NBPtr->MemPtr->StdHeader));
+
+            if (SpdBufferPtr[SPD_TYPE] == JED_DDR2_SDRAM) {
+              ChannelPtr->ChDimmValid |= DimmMask;
+              MCTPtr->DimmValid |= DimmMask;
+            } else {
+              // Current socket is set up to only support DDR2 dimms.
+              IDS_ERROR_TRAP;
+            }
+            if ((SpdBufferPtr[SPD_CHECKSUM] != (UINT8)Checksum) && !SPDCtrl) {
+              //
+              // if NV_SPDCHK_RESTRT is set to 0,
+              // cannot ignore faulty SPD checksum
+              //
+              //  Indicate checksum error
+              ChannelPtr->DimmSpdCse |= DimmMask;
+              PutEventLog (AGESA_ERROR, MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+              SetMemError (AGESA_ERROR, MCTPtr);
+            }
+
+            //  Check module type information.
+            if (SpdBufferPtr[SPD_DIMM_TYPE] & JED_REG_ADC_MSK) {
+              ChannelPtr->RegDimmPresent |= DimmMask;
+              MCTPtr->RegDimmPresent |= DimmMask;
+            }
+
+            if (SpdBufferPtr[SPD_DIMM_TYPE] & JED_SODIMM) {
+              ChannelPtr->SODimmPresent |= DimmMask;
+            }
+
+            //  Check error correction type
+            if (SpdBufferPtr[SPD_EDC_TYPE] & JED_ECC) {
+              MCTPtr->DimmEccPresent |= DimmMask;  //  Dimm has ECC
+            }
+            if (SpdBufferPtr[SPD_EDC_TYPE] & JED_ADRC_PAR) {
+              MCTPtr->DimmParPresent |= DimmMask;  //  Dimm has parity
+            }
+
+            //  Get the Dimm width data
+            Devwidth = SpdBufferPtr[SPD_DEV_WIDTH] & 0xFE;
+            if (Devwidth == 4) {
+              ChannelPtr->Dimmx4Present |= DimmMask;   //  Dimm has parity
+            } else if (Devwidth == 8) {
+              ChannelPtr->Dimmx8Present |= DimmMask;   //  Dimm has parity
+            } else if (Devwidth == 16) {
+              ChannelPtr->Dimmx16Present |= DimmMask;  //  Dimm has parity
+            }
+
+            //  Determine the page size.
+            //       page_size = 2^COLBITS * Devwidth/8
+            //
+            Value16 = (((UINT16)1 << SpdBufferPtr[SPD_COL_SZ]) * Devwidth) / 8;
+            if (!(Value16 >> 11)) {
+              DCTPtr->Timings.DIMM1KPage |= DimmMask;
+            }
+
+            //  Check for 'analysis probe installed'
+            if (SpdBufferPtr[SPD_ATTRIB] & JED_PROBE_MSK) {
+              MCTPtr->Status[SbDiagClks] = TRUE;
+            }
+
+            //  Determine the geometry of the DIMM module
+            if (SpdBufferPtr[SPD_DM_BANKS] & SP_DPL_BIT) {
+              ChannelPtr->DimmPlPresent |= DimmMask;   //  Dimm is planar
+            }
+
+            //  specify the number of ranks
+            Value8 = (SpdBufferPtr[SPD_DM_BANKS] & 0x07) + 1;
+            if (Value8 > 2) {
+              if (ChannelPtr->DimmQrPresent == 0) {
+                // if any DIMMs are QR,
+                // we have to make two passes through DIMMs
+                //
+                MaxDimms = MaxDimms << 1;
+              }
+
+              if (i < DimmSlots) {
+                ChannelPtr->DimmQrPresent |= DimmMask;
+                ChannelPtr->DimmQrPresent |= (DimmMask << 2);
+              }
+              Value8 = 2;
+            } else if (Value8 == 2) {
+              ChannelPtr->DimmDrPresent |= DimmMask;   //  Dual rank dimms
+            }
+
+            //  Calculate bus loading per Channel
+            if (Devwidth == 16) {
+              Devwidth = 4;
+            } else if (Devwidth == 4) {
+              Devwidth = 16;
+            }
+            //  double Addr bus load value for dual rank DIMMs
+            if (Value8 == 2) {
+              Devwidth = Devwidth << 1;
+            }
+
+            ChannelPtr->Ranks = ChannelPtr->Ranks + Value8;
+            ChannelPtr->Loads = ChannelPtr->Loads + Devwidth;
+            ChannelPtr->Dimms++;
+
+            //  Now examine the dimm packaging dates
+            Value8 = SpdBufferPtr[SPD_MAN_DATE_YR];
+            if (Value8 < M_YEAR_06) {
+              ChannelPtr->DimmYr06 |= DimmMask;    //  Built before end of 2006
+              ChannelPtr->DimmWk2406 |= DimmMask;  //  Built before end of week 24,2006
+            } else if (Value8 == M_YEAR_06) {
+              ChannelPtr->DimmYr06 |= DimmMask;    //  Built before end of 2006
+              if (SpdBufferPtr[SPD_MAN_DATE_WK] <= M_WEEK_24) {
+                ChannelPtr->DimmWk2406 |= DimmMask;  //  Built before end of week 24,2006
+              }
+            }
+          } // if DIMM present
+        } // Quadrank
+      } // Dimm loop
+
+      if (Channel == 0) {
+        DCTPtr->Timings.DctDimmValid = ChannelPtr->ChDimmValid;
+        DCTPtr->Timings.DimmSpdCse = ChannelPtr->DimmSpdCse;
+        DCTPtr->Timings.DimmQrPresent = ChannelPtr->DimmQrPresent;
+        DCTPtr->Timings.DimmDrPresent = ChannelPtr->DimmDrPresent;
+        DCTPtr->Timings.Dimmx4Present = ChannelPtr->Dimmx4Present;
+        DCTPtr->Timings.Dimmx8Present = ChannelPtr->Dimmx8Present;
+        DCTPtr->Timings.Dimmx16Present = ChannelPtr->Dimmx16Present;
+      }
+      if ((Channel != 1) || (Dct != 1)) {
+        MCTPtr->DimmPresent <<= 8;
+        MCTPtr->DimmValid <<= 8;
+        MCTPtr->RegDimmPresent <<= 8;
+        MCTPtr->DimmEccPresent <<= 8;
+        MCTPtr->DimmParPresent <<= 8;
+      }
+    } // Channel loop
+  } // DCT loop
+
+
+  //  If we have DIMMs, some further general characteristics checking
+  if (MCTPtr->DimmValid) {
+    //  If there are registered dimms, all the dimms must be registered
+    if (MCTPtr->RegDimmPresent == MCTPtr->DimmValid) {
+      //  All dimms registered
+      MCTPtr->Status[SbRegistered] = TRUE;
+    } else if (MCTPtr->RegDimmPresent) {
+      //  We have an illegal DIMM mismatch
+      PutEventLog (AGESA_FATAL, MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_FATAL, MCTPtr);
+    }
+
+    //  check the ECC capability of the DIMMs
+    if (MCTPtr->DimmEccPresent == MCTPtr->DimmValid) {
+      MCTPtr->Status[SbEccDimms] = TRUE;  //  All dimms ECC capable
+    }
+
+    //  check the parity capability of the DIMMs
+    if (MCTPtr->DimmParPresent == MCTPtr->DimmValid) {
+      MCTPtr->Status[SbParDimms] = TRUE;  //  All dimms parity capable
+    }
+  } else {
+  }
+
+  NBPtr->SwitchDCT (NBPtr, 0);
+  NBPtr->SwitchChannel (NBPtr, 0);
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function finds the best T and CL primary timing parameter pair, per Mfg.,for the given
+ *   set of DIMMs, and store into DIE_STRUCT(.Speed and .Casl).
+ *   See "Global relationship between index values and item values" for definition of
+ *   CAS latency index (j) and Frequency index (k).
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDGetTargetSpeed2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  CONST UINT16 SpeedCvt[] = {
+    DDR400_FREQUENCY,
+    DDR533_FREQUENCY,
+    DDR667_FREQUENCY,
+    DDR800_FREQUENCY,
+    DDR1066_FREQUENCY
+  };
+  INT8 i;
+  INT8 j;
+  INT8 k;
+  INT8 Dct;
+  INT8 Channel;
+  UINT8 T1min;
+  UINT8 CL1min;
+  BOOLEAN IsSupported;
+  MEM_NB_BLOCK *NBPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = TechPtr->NBPtr->MCTPtr;
+
+  CL1min = 0xFF;
+  T1min = 0xFF;
+
+  // For DDR2, run SyncTargetSpeed first to get frequency limit into DCTPtr->Timings.Speed
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    NBPtr->DCTPtr->Timings.TargetSpeed = 16;  // initialized with big number
+  }
+  NBPtr->SyncTargetSpeed (NBPtr);
+
+  // Find target frequency and Tcl
+  for (k = K_MAX; k >= K_MIN; k--) {
+    for (j = J_MIN; j <= J_MAX; j++) {
+      if (MemTSysCapability2 (TechPtr, k, j)) {
+        IsSupported = TRUE;
+        for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+          NBPtr->SwitchDCT (NBPtr, Dct);
+          for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+            NBPtr->SwitchChannel (NBPtr, Channel);
+            ChannelPtr = NBPtr->ChannelPtr;
+            for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+              if (ChannelPtr->ChDimmValid & ((UINT8)1 << i)) {
+                if (!MemTDimmSupports2 (TechPtr, k, j, i)) {
+                  IsSupported = FALSE;
+                  Dct = NBPtr->DctCount;
+                  Channel = NBPtr->ChannelCount;
+                  break;
+                }
+              }
+            }
+          }
+        }
+
+        if (IsSupported) {
+          T1min = k;
+          CL1min = j;
+          //  Kill the loops...
+          k = K_MIN - 1;
+          j = J_MAX + 1;
+        }
+      }
+    }
+  }
+
+  if (T1min == 0xFF) {
+    //  Failsafe values, running in minimum mode
+    PutEventLog (AGESA_FATAL, MEM_ERROR_MISMATCH_DIMM_CLOCKS, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    PutEventLog (AGESA_FATAL, MEM_ERROR_MINIMUM_MODE, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, MCTPtr);
+
+    T1min = T_DEF;
+    CL1min = CL_DEF;
+  }
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+    DCTPtr->Timings.TargetSpeed = SpeedCvt[T1min - 1];
+  }
+
+  // Ensure the target speed can be applied to all channels of the current node
+  NBPtr->SyncTargetSpeed (NBPtr);
+
+  // Set the start-up frequency
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+    DCTPtr->Timings.Speed = DCTPtr->Timings.TargetSpeed;
+    DCTPtr->Timings.CasL = CL1min + 2;  // Convert to clocks
+  }
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function check the symmetry of DIMM pairs (DIMM on Channel A matching with
+ *   DIMM on Channel B), the overall DIMM population, and determine the width mode:
+ *   64-bit, 64-bit muxed, 128-bit.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDCalcWidth2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 *SpdBufferAPtr;
+  UINT8 *SpdBufferBPtr;
+  MEM_NB_BLOCK *NBPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  UINT8 i;
+  UINT16 DimmMask;
+  UINT8 UngangMode;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+
+  UngangMode = UserOptions.CfgMemoryModeUnganged;
+  IDS_OPTION_HOOK (IDS_GANGING_MODE, &UngangMode, &(NBPtr->MemPtr->StdHeader));
+
+  //  Check symmetry of channel A and channel B dimms for 128-bit mode
+  //  capability.
+  //
+  AGESA_TESTPOINT (TpProcMemModeChecking, &(NBPtr->MemPtr->StdHeader));
+  i = 0;
+  if (MCTPtr->DctData[0].Timings.DctDimmValid == MCTPtr->DctData[1].Timings.DctDimmValid) {
+    for (; i < MAX_DIMMS_PER_CHANNEL; i++) {
+      DimmMask = (UINT16)1 << i;
+      if (DCTPtr->Timings.DctDimmValid & DimmMask) {
+        NBPtr->SwitchDCT (NBPtr, 0);
+        MemTGetDimmSpdBuffer2 (TechPtr, &SpdBufferAPtr, i);
+        NBPtr->SwitchDCT (NBPtr, 1);
+        MemTGetDimmSpdBuffer2 (TechPtr, &SpdBufferBPtr, i);
+
+        if ((SpdBufferAPtr[SPD_ROW_SZ]&0x1F) != (SpdBufferBPtr[SPD_ROW_SZ]&0x1F)) {
+          break;
+        }
+
+        if ((SpdBufferAPtr[SPD_COL_SZ]&0x1F) != (SpdBufferBPtr[SPD_COL_SZ]&0x1F)) {
+          break;
+        }
+
+        if (SpdBufferAPtr[SPD_BANK_SZ] != SpdBufferBPtr[SPD_BANK_SZ]) {
+          break;
+        }
+
+        if ((SpdBufferAPtr[SPD_DEV_WIDTH]&0x7F) != (SpdBufferBPtr[SPD_DEV_WIDTH]&0x7F)) {
+          break;
+        }
+
+        if ((SpdBufferAPtr[SPD_DM_BANKS]&0x07) != (SpdBufferBPtr[SPD_DM_BANKS]&0x07)) {
+          break;
+        }
+      }
+    }
+  }
+  if (i < MAX_DIMMS_PER_CHANNEL) {
+    PutEventLog (AGESA_ALERT, MEM_ALERT_ORG_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ALERT, MCTPtr);
+  } else if (!UngangMode) {
+    NBPtr->Ganged = TRUE;
+    MCTPtr->GangedMode = TRUE;
+    MCTPtr->Status[Sb128bitmode] = TRUE;
+    NBPtr->SetBitField (NBPtr, BFDctGangEn, 1);
+  }
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       Initialize DCT Timing registers as per DIMM SPD.
+ *       For primary timing (T, CL) use best case T value.
+ *       For secondary timing params., use most aggressive settings
+ *           of slowest DIMM.
+ *
+ *   Note:
+ *   There are three components to determining "maximum frequency": SPD component,
+ *   Bus load component, and "Preset" max frequency component.
+ *   The SPD component is a function of the min cycle time specified by each DIMM,
+ *   and the interaction of cycle times from all DIMMs in conjunction with CAS
+ *   latency.  The SPD component only applies when user timing mode is 'Auto'.
+ *
+ *   The Bus load component is a limiting factor determined by electrical
+ *   characteristics on the bus as a result of varying number of device loads.  The
+ *   Bus load component is specific to each platform but may also be a function of
+ *   other factors.  The bus load component only applies when user timing mode is
+ * ' Auto'.
+ *
+ *   The Preset component is subdivided into three items and is the minimum of
+ *   the set: Silicon revision, user limit setting when user timing mode is 'Auto' and
+ *   memclock mode is 'Limit', OEM build specification of the maximum frequency.
+ *   The Preset component only applies when user timing mode is 'Auto'.
+
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTAutoCycTiming2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  CONST UINT8 SpdIndexes[] = {
+    SPD_TRCD,
+    SPD_TRP,
+    SPD_TRTP,
+    SPD_TRAS,
+    SPD_TRC,
+    SPD_TWR,
+    SPD_TRRD,
+    SPD_TWTR
+  };
+  CONST UINT8 Multiples[] = {10, 10, 10, 40, 40, 10, 10, 10};
+
+  CONST UINT8 Tab1KTfawTK[] = {8, 10, 13, 14, 0, 20};
+  CONST UINT8 Tab2KTfawTK[] = {10, 14, 17, 18, 0, 24};
+  CONST UINT8 TabDefTrcK[]  = {0x41, 0x3C, 0x3C, 0x3A, 0, 0x3A};
+
+  UINT8 MiniMaxTmg[GET_SIZE_OF (SpdIndexes)];
+  UINT8 MiniMaxTrfc[4];
+
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_NB_BLOCK *NBPtr;
+  UINT16 DimmMask;
+  UINT16 Value16;
+  UINT16 Tk40;
+  UINT8 i;
+  UINT8 j;
+  UINT8 Value8;
+  UINT8 Temp8;
+  UINT8  *StatTmgPtr;
+  UINT16 *StatDimmTmgPtr;
+  BOOLEAN   Is1066;
+  UINT8 *SpdBufferPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+
+  // initialize mini-max arrays
+  for (j = 0; j < GET_SIZE_OF (MiniMaxTmg); j++) {
+    MiniMaxTmg[j] = 0;
+  }
+  for (j = 0; j < GET_SIZE_OF (MiniMaxTrfc); j++) {
+    MiniMaxTrfc[j] = 0;
+  }
+
+  // ======================================================================
+  //  Get primary timing (CAS Latency and Cycle Time)
+  // ======================================================================
+  //  Get OEM specific load variant max
+  //
+
+  //======================================================================
+  // Gather all DIMM mini-max values for cycle timing data
+  //======================================================================
+  //
+  DimmMask = 1;
+  for (i = 0; i < (MAX_CS_PER_CHANNEL / 2); i++) {
+    if (DCTPtr->Timings.DctDimmValid & DimmMask) {
+      MemTGetDimmSpdBuffer2 (TechPtr, &SpdBufferPtr, i);
+      for (j = 0; j < GET_SIZE_OF (SpdIndexes); j++) {
+        Value8 = SpdBufferPtr[SpdIndexes[j]];
+        if (SpdIndexes[j] == SPD_TRC) {
+          if (Value8 == 0 || Value8 == 0xFF) {
+            PutEventLog (AGESA_WARNING, MEM_WARNING_NO_SPDTRC_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, i, &NBPtr->MemPtr->StdHeader);
+            SetMemError (AGESA_WARNING, MCTPtr);
+            Value8 = TabDefTrcK[(DCTPtr->Timings.Speed / 66) - 3];
+          }
+        }
+        if (MiniMaxTmg[j] < Value8) {
+          MiniMaxTmg[j] = Value8;
+        }
+      }
+
+      //  get Trfc0 - Trfc3 values
+      Value8 = SpdBufferPtr[SPD_BANK_SZ];
+      Temp8 = (Value8 << 3) | (Value8 >> 5);
+      Value8 = SpdBufferPtr[SPD_DEV_WIDTH];
+      ASSERT (LibAmdBitScanReverse ((UINT32)Value8) <= 4);
+      Temp8 >>= 4 - LibAmdBitScanReverse ((UINT32)Value8);
+      Value8 = LibAmdBitScanReverse ((UINT32)Temp8);
+      if (MiniMaxTrfc[i] < Value8) {
+        MiniMaxTrfc[i] = Value8;
+      }
+    }
+    DimmMask <<= 1;
+  }
+
+  // ======================================================================
+  //  Convert  DRAM CycleTiming values and store into DCT structure
+  // ======================================================================
+  //
+  Tk40 = 40000 / DCTPtr->Timings.Speed;
+  if (DCTPtr->Timings.Speed == DDR1066_FREQUENCY) {
+    Is1066 = TRUE;
+  } else {
+    Is1066 = FALSE;
+  }
+  //   Notes:
+  //   1. All secondary time values given in SPDs are in binary with UINTs of ns.
+  //   2. Some time values are scaled by four, in order to have least count of 0.25 ns
+  //      (more accuracy).  JEDEC SPD spec. shows which ones are x1 and x4.
+  //   3. Internally to this SW, cycle time, Tk, is scaled by 10 to affect a
+  //      least count of 0.1 ns (more accuracy).
+  //   4. SPD values not scaled are multiplied by 10 and then divided by 10T to find
+  //      equivalent minimum number of bus clocks (a remainder causes round-up of clocks).
+  //   5. SPD values that are prescaled by 4 are multiplied by 10 and then divided by 40T to find
+  //      equivalent minimum number of bus clocks (a remainder causes round-up of clocks).
+  //
+  StatDimmTmgPtr = &DCTPtr->Timings.DIMMTrcd;
+  StatTmgPtr = &DCTPtr->Timings.Trcd;
+  for (j = 0; j < GET_SIZE_OF (SpdIndexes); j++) {
+    Value16 = (UINT16)MiniMaxTmg[j] * Multiples[j];
+    StatDimmTmgPtr[j] = Value16;
+
+    MiniMaxTmg[j] = (UINT8) ((Value16 + Tk40 - 1) / Tk40);
+    if (SpdIndexes[j] == SPD_TRTP) {
+      MiniMaxTmg[j] = (DCTPtr->Timings.Speed <= DDR533_FREQUENCY) ? 2 : 3;   // based on BL of 32 bytes
+    }
+
+    StatTmgPtr[j] = MiniMaxTmg[j];
+  }
+  DCTPtr->Timings.Trfc0 = MiniMaxTrfc[0];
+  DCTPtr->Timings.Trfc1 = MiniMaxTrfc[1];
+  DCTPtr->Timings.Trfc2 = MiniMaxTrfc[2];
+  DCTPtr->Timings.Trfc3 = MiniMaxTrfc[3];
+
+  DCTPtr->Timings.CasL = MemTSPDGetTCL2 (TechPtr);
+
+  if (DCTPtr->Timings.DIMM1KPage) {
+    DCTPtr->Timings.Tfaw = Tab1KTfawTK[(DCTPtr->Timings.Speed / 66) - 3];
+  } else {
+    DCTPtr->Timings.Tfaw = Tab2KTfawTK[(DCTPtr->Timings.Speed / 66) - 3];
+  }
+  if (Is1066) {
+    DCTPtr->Timings.Tfaw >>= 1;
+  }
+
+  //======================================================================
+  // Program DRAM Timing values
+  //======================================================================
+  //
+  NBPtr->ProgramCycTimings (NBPtr);
+
+  MemFInitTableDrive (NBPtr, MTAfterAutoCycTiming);
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the bank addressing, program Mask values and build a chip-select population map.
+ *   This routine programs PCI 0:24N:2x80 config register.
+ *   This routine programs PCI 0:24N:2x60,64,68,6C config registers (CS Mask 0-3)
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDSetBanks2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 *SpdBufferPtr;
+  UINT8 i;
+  UINT8 ChipSel;
+  UINT8 DimmID;
+  UINT8 Value8;
+  UINT8 Rows;
+  UINT8 Cols;
+  UINT8 Ranks;
+  UINT8 Banks;
+  UINT32 BankAddrReg;
+  UINT32 CsMask;
+  UINT16 CSSpdCSE;
+  UINT16 CSExclude;
+  UINT16 DimmQRDR;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+
+  BankAddrReg = 0;
+  CSSpdCSE = 0;
+  CSExclude = 0;
+  for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+    DimmID = ChipSel >> 1;
+
+    DimmQRDR = (DCTPtr->Timings.DimmQrPresent) | (DCTPtr->Timings.DimmDrPresent);
+    if (DCTPtr->Timings.DimmSpdCse & (UINT16) 1 << DimmID) {
+      CSSpdCSE |= (UINT16) ((DimmQRDR & (UINT16) 1 << DimmID) ? 3 : 1) << ChipSel;
+    }
+    if ((DCTPtr->Timings.DimmExclude & ((UINT16) 1 << DimmID)) != 0) {
+      CSExclude |= (UINT16) ((DimmQRDR & (UINT16) 1 << DimmID) ? 3: 1) << ChipSel;
+    }
+
+    if (DCTPtr->Timings.DctDimmValid & ((UINT16)1 << DimmID)) {
+      MemTGetDimmSpdBuffer2 (TechPtr, &SpdBufferPtr, DimmID);
+
+      //  Get the basic data
+      Rows = SpdBufferPtr[SPD_ROW_SZ] & 0x1F;
+      Cols = SpdBufferPtr[SPD_COL_SZ] & 0x1F;
+      Banks = SpdBufferPtr[SPD_L_BANKS];
+      Ranks = (SpdBufferPtr[SPD_DM_BANKS] & 0x07) + 1;
+
+      //  Configure the bank encoding
+      Value8 = (Cols - 9) << 3;
+      Value8 |= (Banks == 8) ? 4 : 0;
+      Value8 |= (Rows - 13);
+
+      for (i = 0; i < 12; i++) {
+        if (Value8 == MemTGetBankAddr2 (i)) {
+          break;
+        }
+      }
+
+      if (i < 12) {
+        BankAddrReg |= ((UINT32)i << (ChipSel << 1));
+
+        // Mask value=(2pow(rows+cols+banks+3)-1)>>8,
+        // or 2pow(rows+cols+banks-5)-1
+        //
+        Value8 = Rows + Cols;
+        Value8 -= (Banks == 8) ? 2:3;
+        if (MCTPtr->Status[Sb128bitmode]) {
+          Value8++;
+        }
+        CsMask = ((UINT32)1 << Value8) - 1;
+        DCTPtr->Timings.CsPresent |= (UINT16)1 << ChipSel;
+
+        if (Ranks >= 2) {
+          DCTPtr->Timings.CsPresent |= (UINT16)1 << (ChipSel + 1);
+        }
+
+        //  Update the DRAM CS Mask for this chipselect
+        NBPtr->SetBitField (NBPtr, BFCSMask0Reg + (ChipSel >> 1), (CsMask & NBPtr->CsRegMsk));
+      }
+    }
+  }
+  // For ranks that need to be excluded, the loading of this rank should be considered
+  // in timing, so need to set CsPresent before setting CsTestFail
+  if ((CSSpdCSE != 0) || (CSExclude != 0)) {
+    if (!NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, (CSSpdCSE | CSExclude), &NBPtr->MemPtr->StdHeader)) {
+      ASSERT (FALSE);
+    }
+  }
+
+  //  If there are no chip selects, we have an error situation.
+  if (DCTPtr->Timings.CsPresent == 0) {
+    PutEventLog (AGESA_ERROR, MEM_ERROR_NO_CHIPSELECT, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, MCTPtr);
+  }
+
+  NBPtr->SetBitField (NBPtr, BFDramBankAddrReg, BankAddrReg);
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function returns the low bit that will be swapped to enable CS interleaving
+ *
+ *     @param[in]   BankEnc - AddrMap Bank encoding from F2x80
+ *     @param[in]   *LowBit - pointer to low bit
+ *     @param[in]   *HiBit  - pointer hight bit
+ *
+ */
+
+VOID
+MemTGetCSIntLvAddr2 (
+  IN       UINT8 BankEnc,
+     OUT   UINT8 *LowBit,
+     OUT   UINT8 *HiBit
+  )
+{
+  CONST UINT8 ArrCodesLo[] = {6, 7, 7, 8, 8, 8, 8, 8, 9, 9, 8, 9};
+  CONST UINT8 ArrCodesHi[] = {19, 20, 21, 21, 21, 22, 22, 23, 23, 24, 24, 25};
+  ASSERT (BankEnc < GET_SIZE_OF (ArrCodesLo));
+  ASSERT (BankEnc < GET_SIZE_OF (ArrCodesHi));
+  //  return ArrCodes[BankEnc];
+  *LowBit = ArrCodesLo[BankEnc];
+  *HiBit = ArrCodesHi[BankEnc];
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function returns the CAS latency of the current frequency.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  CAS Latency
+ */
+UINT8
+STATIC
+MemTSPDGetTCL2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  return TechPtr->NBPtr->DCTPtr->Timings.CasL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *               Get max frequency from OEM platform definition, from
+ *               any user override (limiting) of max frequency, and
+ *               from any Si Revision Specific information.  Return
+ *               the least of these three in DIE_STRUCT.PresetmaxFreq.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]   k -  Frequency index
+ *     @param[in]   j - CAS Latency index
+ *
+ *     @return  TRUE  - (k << 8) | j
+ *     @return  FALSE - 0
+ */
+
+BOOLEAN
+STATIC
+MemTSysCapability2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 k,
+  IN       UINT16 j
+  )
+{
+  if ((k > TechPtr->NBPtr->DCTPtr->Timings.TargetSpeed) || (j > J_MAX)) {
+    return FALSE;
+  }
+
+  return TRUE;    //(k << 8) | j;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      Determine whether dimm(b,i) supports CL(j) and F(k)
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]   k -  Frequency index
+ *     @param[in]   j - CAS Latency index
+ *     @param[in]   i - DIMM number
+ *
+ *     @return  TRUE  - DIMM supports
+ *     @return  FALSE - DIMM does not support
+ */
+
+BOOLEAN
+STATIC
+MemTDimmSupports2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 k,
+  IN       UINT8 j,
+  IN       UINT8 i
+  )
+{
+  CONST UINT8 SpdBytesForCL[3] = { 9, 23, 25};   // SPD bytes for CL X, CL X-.5, and CL X-1
+  UINT8 CLj;
+  UINT8 CLi;
+  UINT8 T1;
+  UINT8 T2;
+  UINT8 Tk;
+  UINT8 *SpdBufferPtr;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  MemTGetDimmSpdBuffer2 (TechPtr, &SpdBufferPtr, i);
+  CLj = (UINT8) 1 << (j + 2);
+  CLi = SpdBufferPtr[SPD_CAS_LAT];
+
+  if (CLj & CLi) {
+    //  If this dimm supports the desired CAS latency...
+    //  Determine the SPD location of the dimm speed UINT8 appropriate
+    //  to the CAS latency indicated by Table_CL2_j.
+    //
+    T1 = LibAmdBitScanReverse ((UINT32)CLj);
+    T2 = LibAmdBitScanReverse ((UINT32)CLi);
+    ASSERT ((T2 - T1) < 3);
+    CLi = SpdBufferPtr[SpdBytesForCL[(T2 - T1)]];
+    Tk = MemTGetTk2 (k);
+    if (CLi == 0) {
+      PutEventLog (AGESA_FATAL, MEM_ERROR_NO_CYC_TIME, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_WARNING, NBPtr->MCTPtr);
+    } else if (Tk >= CLi) {
+      return TRUE;
+    }
+  }
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function returns the cycle time
+ *
+ *     @param[in]   k - CAS Latency index
+ *
+ *     @return      Tk as specified by JEDEC SPD byte 9.
+ */
+
+UINT8
+STATIC
+MemTGetTk2 (
+  IN       UINT8 k
+  )
+{
+  CONST UINT8 TableTK[] = {0x00, 0x50, 0x3D, 0x30, 0x25, 0x18};
+  ASSERT (k < GET_SIZE_OF (TableTK));
+  return TableTK[k];
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function returns the encoded value of bank address.
+ *
+ *     @param[in]  k  value
+ *
+ *     @return      RRRBCC, where CC is the number of Columns minus 9,
+ *                  RRR is the number of Rows minus 12, and B is the number of banks
+ *                  minus 3.
+ */
+
+UINT8
+STATIC
+MemTGetBankAddr2 (
+  IN       UINT8 k
+  )
+{
+  CONST UINT8 TabBankAddr[] = {
+    0x00, 0x08, 0x09, 0x10, 0x0C, 0x0D,
+    0x11, 0x0E, 0x15, 0x16, 0x0F, 0x17
+  };
+  ASSERT (k < GET_SIZE_OF (TabBankAddr));
+  return TabBankAddr[k];
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function returns a pointer to the SPD Buffer of a specific dimm on
+ *    the current channel.
+ *
+ *     @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out] **SpdBuffer - Pointer to a pointer to a UINT8 Buffer
+ *     @param[in] Dimm - Dimm number
+ *
+ *
+ *     @return BOOLEAN - Value of DimmPresent
+ *                       TRUE = Dimm is present, pointer is valid
+ *                       FALSE = Dimm is not present, pointer has not been modified.
+ */
+
+BOOLEAN
+MemTGetDimmSpdBuffer2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT8 **SpdBuffer,
+  IN       UINT8 Dimm
+  )
+{
+  CH_DEF_STRUCT *ChannelPtr;
+  SPD_DEF_STRUCT *SPDPtr;
+  BOOLEAN DimmPresent;
+
+  DimmPresent = FALSE;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+  ASSERT (Dimm < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0])))
+  SPDPtr = ChannelPtr->DimmSpdPtr[Dimm];
+
+
+  if (SPDPtr != NULL) {
+    DimmPresent = SPDPtr->DimmPresent;
+    if (DimmPresent) {
+      *SpdBuffer = SPDPtr->Data;
+    }
+  }
+  return DimmPresent;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtspd2.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtspd2.h
new file mode 100644
index 0000000000..b11588879e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR2/mtspd2.h
@@ -0,0 +1,183 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtspd2.h
+ *
+ * Technology SPD support for DDR2
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR2)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTSPD2_H_
+#define _MTSPD2_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*===============================================================================
+ *   Jedec DDR II
+ *===============================================================================
+ */
+#define SPD_TYPE         2              /* SPD byte read location */
+#define JED_DDR_SDRAM     7              /* Jedec defined bit field */
+#define JED_DDR2_SDRAM    8              /* Jedec defined bit field */
+
+#define SPD_DIMM_TYPE    20
+#define SPD_ATTRIB       21
+#define JED_DIF_CK_MSK   0x20            /* Differential Clock Input */
+#define JED_REG_ADC_MSK  0x11            /* Registered Address/Control */
+#define JED_PROBE_MSK    0x40            /* Analysis Probe installed */
+#define JED_SODIMM       0x04            /* SO-DIMM */
+#define SPD_DEV_ATTRIB   22
+#define SPD_EDC_TYPE     11
+#define JED_ECC          2
+#define JED_ADRC_PAR     4
+#define SPD_ROW_SZ       3
+#define SPD_COL_SZ       4
+#define SPD_L_BANKS      17              /* number of [logical] banks on each device */
+#define SPD_DM_BANKS     5               /* number of physical banks on dimm */
+#define SP_DPL_BIT       4               /*  Dram package bit */
+#define SPD_BANK_SZ      31              /* capacity of physical bank */
+#define SPD_DEV_WIDTH    13
+#define SPD_CAS_LAT      18
+#define SPD_TRP         27
+#define SPD_TRRD        28
+#define SPD_TRCD        29
+#define SPD_TRAS        30
+#define SPD_TWR         36
+#define SPD_TWTR        37
+#define SPD_TRTP        38
+#define SPD_TRC         41
+#define SPD_TRFC        42
+#define SPD_CHECKSUM    63
+#define SPD_MAN_DATE_YR   93             /* Module Manufacturing Year (BCD) */
+
+#define SPD_MAN_DATE_WK   94             /* Module Manufacturing Week (BCD) */
+
+/*-----------------------------
+ * Jedec DDR II related equates
+ *-----------------------------
+ */
+#define M_YEAR_06         0x06           /*  Manufacturing Year BCD encoding of 2006 - 06d */
+#define M_WEEK_24         0x24           /*  Manufacturing Week BCD encoding of June - 24d */
+
+#define J_MIN           0              /* j loop constraint. 1=CL 2.0 T */
+#define J_MAX           5              /* j loop constraint. 5=CL 7.0 T */
+#define K_MIN           1              /* k loop constraint. 1=200 MHz */
+#define K_MAX           5              /* k loop constraint. 5=533 MHz */
+#define CL_DEF          2              /* Default value for failsafe operation. 2=CL 4.0 T */
+#define T_DEF           1              /* Default value for failsafe operation. 1=5ns (cycle time) */
+
+
+#define BIAS_TCL_T       1
+#define BIAS_TRP_T       3              /* bias to convert bus clocks to bit field value */
+#define BIAS_TRRD_T      2
+#define BIAS_TRCD_T      3
+#define BIAS_TRAS_T      3
+#define BIAS_TRC_T       11
+#define BIAS_TRTP_T      1
+#define BIAS_TWR_T       3
+#define BIAS_TWTR_T      0
+#define BIAS_TFAW_T      7
+
+#define MIN_TRP_T        3                   /* min programmable value in busclocks */
+#define MAX_TRP_T        6                   /* max programmable value in busclocks */
+#define MIN_TRRD_T       2
+#define MAX_TRRD_T       5
+#define MIN_TRCD_T       3
+#define MAX_TRCD_T       6
+#define MIN_TRAS_T       5
+#define MAX_TRAS_T       18
+#define MIN_TRC_T        11
+#define MAX_TRC_T        26
+#define MIN_TRTP_T       2
+#define MAX_TRTP_T       4
+#define MIN_TWR_T        3
+#define MAX_TWR_T        6
+#define MIN_TWTR_T       1
+#define MAX_TWTR_T       3
+
+/* DDR2-1066 support */
+#define BIAS_TRCD_T_1066      5
+#define BIAS_TRAS_T_1066      15
+#define BIAS_TRRD_T_1066      4
+#define BIAS_TWR_T_1066       4
+#define BIAS_TRP_T_1066       5
+#define BIAS_TWTR_T_1066      4
+
+#define MIN_TRCD_T_1066       5
+#define MAX_TRCD_T_1066       12
+#define MIN_TRAS_T_1066       15
+#define MAX_TRAS_T_1066       30
+#define MIN_TRC_T_1066        11
+#define MAX_TRC_T_1066        42
+#define MIN_TRRD_T_1066       4
+#define MAX_TRRD_T_1066       7
+#define MIN_TWR_T_1066        5
+#define MAX_TWR_T_1066        8
+#define MIN_TRP_T_1066        5
+#define MAX_TRP_T_1066        12
+#define MIN_TWTR_T_1066       4
+#define MAX_TWTR_T_1066       7
+
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#endif  /* _MTSPD2_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mt3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mt3.c
new file mode 100644
index 0000000000..ffe6b3e37b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mt3.c
@@ -0,0 +1,236 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt3.c
+ *
+ * Common Technology  functions for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mtspd3.h"
+#include "mtot3.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+/* features */
+#define FILECODE PROC_MEM_TECH_DDR3_MT3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function Constructs the technology block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+BOOLEAN
+MemConstructTechBlock3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  TECHNOLOGY_TYPE *TechTypePtr;
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 i;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT8 DimmSlots;
+
+
+  TechTypePtr = (TECHNOLOGY_TYPE *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MEM_TECH, NBPtr->MCTPtr->SocketId, 0, 0, NULL, NULL);
+  if (TechTypePtr != NULL) {
+    // Ensure the platform override value is valid
+    ASSERT ((*TechTypePtr == DDR3_TECHNOLOGY) || (*TechTypePtr == DDR2_TECHNOLOGY));
+    if (*TechTypePtr != DDR3_TECHNOLOGY) {
+      return FALSE;
+    }
+  }
+
+  TechPtr->NBPtr = NBPtr;
+  TechPtr->RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  TechPtr->SendAllMRCmds = MemTSendAllMRCmds3;
+  TechPtr->FreqChgCtrlWrd = FreqChgCtrlWrd3;
+  TechPtr->SetDramMode = MemTSetDramMode3;
+  TechPtr->DimmPresence = MemTDIMMPresence3;
+  TechPtr->SpdCalcWidth = MemTSPDCalcWidth3;
+  TechPtr->SpdGetTargetSpeed = MemTSPDGetTargetSpeed3;
+  TechPtr->AutoCycTiming = MemTAutoCycTiming3;
+  TechPtr->SpdSetBanks = MemTSPDSetBanks3;
+  TechPtr->SetDqsEccTmgs = MemTSetDQSEccTmgs;
+  TechPtr->GetCSIntLvAddr = MemTGetCSIntLvAddr3;
+  TechPtr->AdjustTwrwr = MemTAdjustTwrwr3;
+  TechPtr->AdjustTwrrd = MemTAdjustTwrrd3;
+  TechPtr->GetDimmSpdBuffer = MemTGetDimmSpdBuffer3;
+  TechPtr->GetLD = MemTGetLD3;
+  TechPtr->MaxFilterDly = 0;
+
+  //
+  // Map the Logical Dimms on this channel to the SPD that should be used for that logical DIMM.
+  // The pointers to the DIMM SPD information is as follows (2 Dimm/Ch and 3 Dimm/Ch examples).
+  //
+  //    DIMM Spd Buffer                          Current Channel DimmSpdPtr[MAX_DIMMS_PER_CHANNEL] array
+  //    (Number of dimms varies by platform)     (Array size is determined in AGESA.H) Dimm operations loop
+  //                                              on this array only)
+  //    2 DIMMS PER CHANNEL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1 SR/DR DIMM <--------------DimmSpdPtr[1]
+  //                                                         DimmSpdPtr[2]------->NULL
+  //                                                         DimmSpdPtr[3]------->NULL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1    QR DIMM <---------+----DimmSpdPtr[1]
+  //                                                    |    DimmSpdPtr[2]------->NULL
+  //                                                    +----DimmSpdPtr[3]
+  //
+  //    Socket N  Channel N Dimm 0    QR DIMM <-----+--------DimmSpdPtr[0]
+  //                        Dimm 1    QR DIMM <-----|---+----DimmSpdPtr[1]
+  //                                                +-- | ---DimmSpdPtr[2]
+  //                                                    +----DimmSpdPtr[3]
+  //
+  //    3 DIMMS PER CHANNEL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1 SR/DR DIMM <--------------DimmSpdPtr[1]
+  //                        Dimm 3 SR/DR DIMM <--------------DimmSpdPtr[2]
+  //                                                         DimmSpdPtr[3]------->NULL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1    QR DIMM <---------+----DimmSpdPtr[1]
+  //                        Dimm 3 SR/DR DIMM <-------- | ---DimmSpdPtr[2]
+  //                                                    +----DimmSpdPtr[3]
+  //
+  //
+  //    FOR LRDIMMS
+  //
+  //    This code will assign SPD pointers on the basis of Physical ranks, even though
+  //    an LRDIMM may only use one or two logical ranks, that determination will have to
+  //    be made from downstream code.  An LRDIMM with greater than 2 Physical ranks will have
+  //    its DimmSpdPtr[] mapped as if it were a QR in the above diagrams.
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+    for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+      NBPtr->SwitchChannel (NBPtr, Channel);
+      ChannelPtr = NBPtr->ChannelPtr;
+      ChannelPtr->TechType = DDR3_TECHNOLOGY;
+      ChannelPtr->MCTPtr = MCTPtr;
+      ChannelPtr->DCTPtr = DCTPtr;
+
+      DimmSlots = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                         MCTPtr->SocketId,
+                                         NBPtr->GetSocketRelativeChannel (NBPtr, Dct, Channel)
+                                        );
+      //
+      // Initialize the SPD pointers for each Dimm
+      //
+      for (i = 0 ; i < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0])) ; i++) {
+        ChannelPtr->DimmSpdPtr[i] = NULL;
+      }
+      for (i = 0 ; i < DimmSlots; i++) {
+        ChannelPtr->DimmSpdPtr[i] = &(ChannelPtr->SpdPtr[i]);
+        if ( (i + 2) < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0]))) {
+          if (ChannelPtr->DimmSpdPtr[i]->DimmPresent) {
+            if ((((ChannelPtr->DimmSpdPtr[i]->Data[SPD_RANKS] >> 3) & 0x07) + 1) > 2) {
+              ChannelPtr->DimmSpdPtr[i + 2] = &(ChannelPtr->SpdPtr[i]);
+            }
+          }
+        }
+      }
+    }
+  }
+  // Initialize Common technology functions
+  MemTCommonTechInit (TechPtr);
+
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mt3.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mt3.h
new file mode 100644
index 0000000000..710ccc9c45
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mt3.h
@@ -0,0 +1,135 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt3.h
+ *
+ * Common Technology
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MT3_H_
+#define _MT3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemConstructTechBlock3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+BOOLEAN
+MemTSetDramMode3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTDIMMPresence3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSPDCalcWidth3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSPDGetTargetSpeed3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTAutoCycTiming3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSPDSetBanks3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTGetCSIntLvAddr3 (
+  IN       UINT8 BankEnc,
+  OUT      UINT8 *LowBit,
+  OUT      UINT8 *HiBit
+  );
+
+VOID
+MemTSendAllMRCmds3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  );
+
+VOID
+FreqChgCtrlWrd3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+
+BOOLEAN
+MemTGetDimmSpdBuffer3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT8 **SpdBuffer,
+  IN       UINT8 Dimm
+  );
+#endif  /* _MT3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtlrdimm3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtlrdimm3.c
new file mode 100644
index 0000000000..3ae45e6271
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtlrdimm3.c
@@ -0,0 +1,1448 @@
+/**
+ * @file
+ *
+ * mtlrdimm3.c
+ *
+ * Technology initialization and control workd support for DDR3 LRDIMMS
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 23714 $ @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mtspd3.h"
+#include "mtrci3.h"
+#include "mtsdi3.h"
+#include "mtlrdimm3.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_TECH_DDR3_MTLRDIMM3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemTSendMBCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Fn,
+  IN       UINT8 Rcw,
+  IN       UINT8 Value
+  );
+
+VOID
+STATIC
+MemTSendExtMBCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT16 Addr,
+  IN       UINT16 Data,
+  IN       UINT8 Len
+  );
+
+UINT8
+STATIC
+MemTGetSpecialMBCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Fn,
+  IN       UINT8 Rc
+  );
+
+BOOLEAN
+STATIC
+MemTLrDimmControlRegInit3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+STATIC
+MemTLrDimmFreqChgCtrlWrd3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+STATIC
+MemTWLPrepareLrdimm3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *Wl
+  );
+
+BOOLEAN
+STATIC
+MemTSendAllMRCmdsLR3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *CsPtr
+  );
+
+VOID
+STATIC
+MemTEMRS1Lr3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel,
+  IN       UINT8 PhyRank
+  );
+
+VOID
+STATIC
+MemTEMRS2Lr3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  );
+
+
+BOOLEAN
+STATIC
+MemTLrdimmRankMultiplication (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *DimmID
+  );
+
+BOOLEAN
+STATIC
+MemTLrdimmBuf2DramTrain3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+STATIC
+MemTLrdimmSyncTrainedDlys (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+STATIC
+MemTLrdimmPresence (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *DimmID
+  );
+
+UINT32
+STATIC
+MemTLrDimmGetBufferID (
+  IN OUT  MEM_TECH_BLOCK *TechPtr,
+  IN      UINT8 Dimm
+  );
+
+VOID
+STATIC
+MemTLrdimmInitHook (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       LRDIMM_HOOK_ENTRYPOINT Entrypoint,
+  IN       UINT8 Dimm,
+  IN OUT   VOID  *OptParam
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes LRDIMM functions.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+BOOLEAN
+MemTLrdimmConstructor3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  TechPtr->TechnologySpecificHook[LrdimmSendAllMRCmds]      = MemTSendAllMRCmdsLR3;
+  TechPtr->TechnologySpecificHook[LrdimmControlRegInit]     = MemTLrDimmControlRegInit3;
+  TechPtr->TechnologySpecificHook[LrdimmFreqChgCtrlWrd]     = MemTLrDimmFreqChgCtrlWrd3;
+  TechPtr->TechnologySpecificHook[WlTrainingPrepareLrdimm]  = MemTWLPrepareLrdimm3;
+  TechPtr->TechnologySpecificHook[LrdimmRankMultiplication] = MemTLrdimmRankMultiplication;
+  TechPtr->TechnologySpecificHook[LrdimmBuf2DramTrain]      = MemTLrdimmBuf2DramTrain3;
+  TechPtr->TechnologySpecificHook[LrdimmSyncTrainedDlys]    = MemTLrdimmSyncTrainedDlys;
+  TechPtr->TechnologySpecificHook[LrdimmPresence]           = MemTLrdimmPresence;
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends a Control word command to an LRDIMM Memory Buffer
+ *
+ *     @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]     Fn       - control word function
+ *     @param[in]     Rcw      - control word number
+ *     @param[in]     Value    - value to send
+ *
+ */
+
+VOID
+STATIC
+MemTSendMBCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Fn,
+  IN       UINT8 Rcw,
+  IN       UINT8 Value
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  ASSERT (Rcw != RCW_FN_SELECT);  // RC7 can only be used for function select
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tF%dRC%d = %x\n", Fn, Rcw, Value);
+  //
+  // Select the MB Function by sending the Fn number
+  //  to the Function Select Control Word
+  //
+  MemUWait10ns (800, NBPtr->MemPtr);
+  MemTSendCtlWord3 (TechPtr, RCW_FN_SELECT, Fn);
+  //
+  // Send the value to the control word
+  //
+  MemUWait10ns (800, NBPtr->MemPtr);
+  MemTSendCtlWord3 (TechPtr, Rcw, Value);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends a an Extended Control word command to an LRDIMM Memory Buffer
+ *
+ *     @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]     Addr     - Extended Control Word Address
+ *                                 Addr[15:12] Extended Control Workd Function Select
+ *                                 Addr[11:0] Extended Control Word CSR Address
+ *     @param[in]     Data     - value to send
+ *     @param[in]     Len      - Length of data.  1 or 2 bytes
+ *
+ */
+
+VOID
+STATIC
+MemTSendExtMBCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT16 Addr,
+  IN       UINT16 Data,
+  IN       UINT8 Len
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  ASSERT ((Len == 1) || (Len == 2));
+  if (Len == 2 ) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\tExtRC_x%04x = %04x\n", Addr, Data);
+  } else {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\tExtRC_x%04x = %02x\n", Addr, (UINT8) (Data & 0xFF) );
+  }
+  //
+  // Select the MB Function by sending the Fn number
+  //  to the Function Select Control Word
+  //
+  MemUWait10ns (800, NBPtr->MemPtr);
+  MemTSendCtlWord3 (TechPtr, RCW_FN_SELECT, 13);
+  //
+  // Send address via control words
+  //
+  MemUWait10ns (800, NBPtr->MemPtr);
+  MemTSendCtlWord3 (TechPtr, 9, (UINT8) (Addr >> 12));
+  MemUWait10ns (800, NBPtr->MemPtr);
+  MemTSendCtlWord3 (TechPtr, 10, (UINT8) (Addr & 0xF));
+  MemUWait10ns (800, NBPtr->MemPtr);
+  MemTSendCtlWord3 (TechPtr, 11, (UINT8) ((Addr >> 4) & 0x0F));
+  MemUWait10ns (800, NBPtr->MemPtr);
+  MemTSendCtlWord3 (TechPtr, 12, (UINT8) ((Addr >> 8) & 0x0F));
+  //
+  // Send the Lower Byte of Data
+  //
+  MemUWait10ns (800, NBPtr->MemPtr);
+  MemTSendCtlWord3 (TechPtr, 14, (UINT8) (Data & 0xF));
+  MemUWait10ns (800, NBPtr->MemPtr);
+  MemTSendCtlWord3 (TechPtr, 15, (UINT8) ((Data >> 4) & 0x0F));
+  //
+  // Send the Upper Byte of Data
+  //
+  if (Len == 2) {
+    MemUWait10ns (800, NBPtr->MemPtr);
+    MemTSendCtlWord3 (TechPtr, 10, (UINT8) ((Addr & 0xF) + 1));
+    MemUWait10ns (800, NBPtr->MemPtr);
+    MemTSendCtlWord3 (TechPtr, 14, (UINT8) ((Data >> 8) & 0xF));
+    MemUWait10ns (800, NBPtr->MemPtr);
+    MemTSendCtlWord3 (TechPtr, 15, (UINT8) ((Data >> 12) & 0xF));
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets the value of special RCW
+ *
+ *     @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]     Dimm     - Physical LR DIMM number
+ *     @param[in]     Fn       - control word function
+ *     @param[in]     Rc       - control word number
+ *
+ *     @return      Special RCW value
+ *
+ */
+
+UINT8
+STATIC
+MemTGetSpecialMBCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Fn,
+  IN       UINT8 Rc
+  )
+{
+  CONST UINT8   F0RC13PhyRankTab[] = {3, 2, 0, 1, 0};
+  UINT8         PhyRanks;
+  UINT8         LogRanks;
+  UINT8         DramCap;
+  UINT8         Value8;
+  UINT8         *SpdBufferPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm);
+
+  Value8 = 0;
+  switch (Fn) {
+  case 0:
+    switch (Rc) {
+    case 8:
+      // F0RC8
+      Value8 = NBPtr->PsPtr->F0RC8;
+      break;
+    case 10:
+      // F0RC10
+      // 2:0 OperatingSpeed: operating speed. BIOS: Table 88.
+      if (NBPtr->DCTPtr->Timings.Speed == DDR667_FREQUENCY) {
+        Value8 = 0;
+      } else {
+        Value8 = (UINT8) (NBPtr->DCTPtr->Timings.Speed / 133) - 3;
+      }
+      break;
+    case 11:
+      // F0RC11
+      // 3:2 ParityCalculation: partiy calculation. BIOS: Table.
+      // 1:0 OperatingVoltage: operating voltage. BIOS: IF(VDDIO == 1.5) THEN 00b ELSEIF (VDDIO ==
+      //     1.35) THEN 01b ELSE 10b ENDIF.
+      DramCap = SpdBufferPtr[SPD_DENSITY] & 0xF;
+      if (NBPtr->PsPtr->LrdimmRowAddrBits[Dimm] > 16) {
+        Value8 = 8;
+      } else {
+        Value8 = 4;
+      }
+      Value8 |= CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage);
+      break;
+    case 13:
+      // F0RC13
+      // 3:2 NumLogicalRanks: partiy calculation. BIOS: Table 90.
+      // 1:0 NumPhysicalRanks: operating voltage. BIOS: Table 89.
+      LogRanks = NBPtr->ChannelPtr->LrDimmLogicalRanks[Dimm] >> 1;
+      PhyRanks = F0RC13PhyRankTab[(SpdBufferPtr[SPD_RANKS] >> 3) & 7];
+      Value8 = (LogRanks << 2) | PhyRanks;
+      break;
+    case 14:
+      // F0RC14
+      // 3 DramBusWidth: DRAM bus width. BIOS: IF (DeviceWidth==0) THEN 0 ELSE 1 ENDIF.
+      // 2 MRSCommandControl: MRS command control. BIOS: IF (F0RC15[RankMultiplicationControl]
+      //   > 0) THEN 1 ELSE 0 ENDIF.
+      // 1 RefreshPrechargeCommandControl: refresh and precharge command control. BIOS: IF
+      //   (F0RC15[RankMultiplicationControl] > 0) THEN D18F2xA8_dct[1:0][LrDimmEnhRefEn] ELSE 0 ENDIF.
+      // 0 AddressMirror: address mirror. BIOS: RankMap. See D18F2x[5C:40]_dct[1:0][OnDimmMirror].
+      if ((SpdBufferPtr[SPD_DEV_WIDTH] & 7) != 0) {
+        Value8 |= 8;
+      }
+      if (NBPtr->ChannelPtr->LrDimmRankMult[Dimm] > 1) {
+        Value8 |= 4;
+        if (NBPtr->GetBitField (NBPtr, BFLrDimmEnhRefEn) == 1) {
+          Value8 |= 2;
+        }
+      }
+      if ((SpdBufferPtr[SPD_ADDRMAP] & 1) != 0) {
+        Value8 |= 1;
+      }
+      break;
+    case 15:
+      // F0RC15
+      // 3:0 RankMultiplicationControl: rank multiplication control. BIOS: Table 91.
+      DramCap = SpdBufferPtr[SPD_DENSITY] & 0xF;
+      ASSERT ((DramCap >= 2) && (DramCap <= 4));            // BKDG only lists 1Gb, 2Gb, and 4Gb
+      switch (NBPtr->ChannelPtr->LrDimmRankMult[Dimm]) {
+      case 1:
+        Value8 = 0;
+        break;
+      case 2:
+        Value8 = DramCap - 1;
+        break;
+      case 4:
+        Value8 = DramCap + 3;
+        break;
+      default:
+        ASSERT (FALSE);
+      }
+      break;
+    default:
+      ASSERT (FALSE);
+    }
+    break;
+  case 1:
+    switch (Rc) {
+    case 0:
+      // F1RC0
+      Value8 = NBPtr->PsPtr->F1RC0;
+      Value8 |= (UINT8) NBPtr->GetBitField (NBPtr, BFCSTimingMux67) << 3;
+      break;
+    case 1:
+      // F1RC1
+      Value8 = NBPtr->PsPtr->F1RC1;
+      break;
+    case 2:
+      // F1RC2
+      Value8 = NBPtr->PsPtr->F1RC2;
+      break;
+    case 9:
+      // F1RC9
+      if (NBPtr->GetBitField (NBPtr, BFLrDimmEnhRefEn) == 0) {
+        Value8 = 1;
+      }
+      break;
+    default:
+      ASSERT (FALSE);
+    }
+    break;
+  case 3:
+    switch (Rc) {
+    case 0:
+      // F3RC0
+      // 3   TDQSControl: TDQS control. BIOS: 0.
+      // 2:0 RttNom: RttNom. BIOS: Table 57, Table 60
+      Value8 = NBPtr->PsPtr->RttNom[Dimm << 1];
+      break;
+    case 1:
+      // F3RC1
+      // 3   Vref: Vref. BIOS: 0.
+      // 2:0 RttWr: RttWr. BIOS: Table 57, Table 60.
+      Value8 = NBPtr->PsPtr->RttWr[Dimm << 1];
+      break;
+    case 6:
+      // F3RC6
+      // IF (D18F2x90_dct[1:0][X4Dimm] == 0) THEN 1 ELSE 0
+      if (NBPtr->GetBitField (NBPtr, BFX4Dimm) == 0) {
+        Value8 = 8;
+      }
+      break;
+    default:
+      ASSERT (FALSE);
+    }
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+
+  return Value8;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends LRDIMM Control Words to all LRDIMMS
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ */
+
+BOOLEAN
+STATIC
+MemTLrDimmControlRegInit3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  CONST UINT8 RCWInitTable[] = {
+    //  RCW,  Mask, SPD
+    F0, RC0,  0x00, SPD_NONE,
+    F0, RC1,  0x00, SPD_NONE,
+    F0, RC2,  0x03, SPD_67,
+    F0, RC10, 0x00, SPECIAL_CASE,
+    F0, RC11, 0x00, SPECIAL_CASE,
+
+    F1, RC8,  0x0F, SPD_69,
+    F1, RC11, 0xF0, SPD_69,
+    F1, RC12, 0x0F, SPD_70,
+    F1, RC13, 0xF0, SPD_70,
+    F1, RC14, 0x0F, SPD_71,
+    F1, RC15, 0xF0, SPD_71,
+
+    WAIT_6US, 0, 0, 0,
+
+    F0, RC3,  0xF0, SPD_67,
+    F0, RC4,  0x0F, SPD_68,
+    F0, RC5,  0xF0, SPD_68,
+
+    F0, RC6,  0x00, SPD_NONE,
+    F0, RC8,  0x00, SPECIAL_CASE,
+    F0, RC9,  0x0C, SPD_NONE,
+    F0, RC13, 0x00, SPECIAL_CASE,
+    F0, RC14, 0x00, SPECIAL_CASE,
+    F0, RC15, 0x00, SPECIAL_CASE,
+
+    F1, RC0,  0x00, SPECIAL_CASE,
+    F1, RC1,  0x00, SPECIAL_CASE,
+    F1, RC2,  0x00, SPECIAL_CASE,
+    F1, RC3,  0x00, SPD_NONE,
+    F1, RC9,  0x00, SPECIAL_CASE,
+    F1, RC10, 0x00, SPD_NONE,
+
+    F2, RC0,  0x00, SPD_NONE,
+    F2, RC1,  0x00, SPD_NONE,
+    F2, RC2,  0x0F, SPD_NONE,
+    F2, RC3,  0x00, SPD_NONE,
+
+    F3, RC0,  0x00, SPECIAL_CASE,
+    F3, RC1,  0x00, SPECIAL_CASE,
+    F3, RC2,  0x01, SPD_NONE,
+    F3, RC6,  0x00, SPECIAL_CASE
+    //
+    // F3 RC[8,9] are programmed in MDQ RC loop
+    //
+    // F[10:3] RC[11,10] are programmed in QxODT RC loop
+    //
+    // F[15,14] RC[15:0] are programmed in personality RC loop
+  };
+
+  UINT8           Dimm;
+  UINT16          i;
+  UINT16          DimmMask;
+  UINT8           Fn;
+  UINT8           Rc;
+  UINT8           Mask;
+  UINT8           Spd;
+  UINT8           *SpdBufferPtr;
+  UINT8           FreqDiffOffset;
+  UINT8           Value8;
+  UINT32           Temp32;
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK    *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+      DimmMask = (UINT16)1 << Dimm;
+      if ((NBPtr->ChannelPtr->LrDimmPresent & DimmMask) != 0) {
+        //
+        // Select the Target Chipselects
+        //
+        NBPtr->SetBitField (NBPtr, BFMrsChipSel, (Dimm << 1));
+        NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (Dimm << 1));
+
+        MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm);
+
+        IDS_HDT_CONSOLE (MEM_FLOW, "\t\tSending LRDIMM Control Words: Dimm %02x\n", Dimm);
+
+        for (i = 0; i < sizeof (RCWInitTable) ; i += 4) {
+          Fn   = RCWInitTable[i];
+          Rc   = RCWInitTable[i + 1];
+          Mask = RCWInitTable[i + 2];
+          Spd  = RCWInitTable[i + 3];
+
+          if (Fn == WAIT_6US) {
+            MemUWait10ns (600, MemPtr);   // wait 6us for TSTAB
+          } else {
+            if (Spd == SPD_NONE) {
+              Value8 = Mask;
+            } else if (Spd == SPECIAL_CASE) {
+              Value8 = MemTGetSpecialMBCtlWord3 (TechPtr, Dimm, Fn, Rc);
+            } else {
+              Value8 = (Mask > 0x0F) ? ((SpdBufferPtr[Spd] & Mask) >> 4) : (SpdBufferPtr[Spd] & Mask);
+            }
+            MemTSendMBCtlWord3 (TechPtr, Fn, Rc, Value8);
+          }
+        }
+
+        FreqDiffOffset = (UINT8) (SPD_FREQ_DIFF_OFFSET * (((NBPtr->DCTPtr->Timings.Speed / 133) - 3) / 2));
+        //
+        // Send RCW to program MDQ termination and drive strength
+        //
+        for (Rc = 8; Rc <= 9; Rc++) {
+          Value8 = SpdBufferPtr[SPD_MDQ_800_1066 + FreqDiffOffset];
+          Value8 = (Rc == 9) ? (Value8 >> 4) : Value8;
+          MemTSendMBCtlWord3 (TechPtr, 3, Rc, Value8 & 0x07);
+        }
+        //
+        // Send RCW to program QxODT
+        //
+        for (Fn = 3; Fn <= 10; Fn ++) {
+          for (Rc = 10; Rc <= 11; Rc++) {
+            Value8 = SpdBufferPtr[SPD_QXODT_800_1066 + FreqDiffOffset + ((Fn - 3) >> 1)];
+            Value8 = (Rc == 11) ? (Value8 >> 4) : (Value8 & 0x0F);
+            Value8 = ((Fn & 1) == 0) ? (Value8 >> 2) : (Value8 & 0x03);
+            MemTSendMBCtlWord3 (TechPtr, Fn, Rc, Value8);
+          }
+        }
+
+        MemTLrdimmInitHook (TechPtr, AFTER_TSTAB, Dimm, 0);
+        //
+        // Send Personality bytes from SPD
+        //
+        for (i = 0; i < 15; i ++) {
+          Value8 = SpdBufferPtr[SPD_PERSONALITY_BYTE + i];
+          Fn = (UINT8) (14 + (i >> 3));
+          Rc = (UINT8) ((i << 1) & 0x0F);
+          if ( i == 0) {
+            Value8 |= 0x01;
+          } else if ( i > 10) {
+            Rc += 2;
+          }
+          MemTSendMBCtlWord3 (TechPtr, Fn, Rc, (Value8 & 0x0F));
+          if (i == 3) {
+            Fn++;
+          } else {
+            Rc++;
+          }
+          MemTSendMBCtlWord3 (TechPtr, Fn, Rc, (Value8 >> 4));
+        }
+        //
+        // Send Extended Control Words to Buffer
+        //
+        // ExtRC_xAC
+        //
+        MemTSendExtMBCtlWord3 (TechPtr, 0x00AC, 0, 1);
+        //
+        // ExtRC_xB8-BF
+        //
+        Value8 = SpdBufferPtr[SPD_MR1_MR2_800_1066 + FreqDiffOffset];
+        for (i = 0x00B8; i < 0x00C0; i++) {
+          MemTSendExtMBCtlWord3 (TechPtr, i, Value8, 1);
+          if (i == 0xB9) {
+            //
+            // Phys ranks > 1, Rtt_nom = 0
+            //
+            Value8 &= 0xE3;
+          }
+        }
+        // ExtRC_xC8
+        Value8 = (UINT8) (NBPtr->MemNGetMR0CL (NBPtr) & 0x000000FF);
+        Value8 = ((Value8 & 0xE0) | ((Value8 & 0x04) << 1));
+        Value8 |= 1<<2; // RBT
+        Value8 |= NBPtr->GetBitField (NBPtr, BFBurstCtrl); // BL
+        MemTSendExtMBCtlWord3 (TechPtr, 0x00C8 , Value8, 1);
+        // ExtRC_xC9
+        // PPD
+        Value8 = (UINT8) (NBPtr->GetBitField (NBPtr, BFPchgPDModeSel) & 0x000000FF);
+        NBPtr->FamilySpecificHook[MR0_PPD] (NBPtr, &Value8);
+        IDS_OPTION_HOOK (IDS_MEM_MR0, &Value8, &TechPtr->NBPtr->MemPtr->StdHeader);
+        Value8 <<= 4;
+        // WR
+        Temp32 = NBPtr->MemNGetMR0WR (NBPtr);
+        Value8 |= (UINT8) ((Temp32 >> 8) & 0x000000FF);
+        MemTSendExtMBCtlWord3 (TechPtr, 0x00C9 , Value8, 1);
+        // ExtRC_xCA
+        MemTSendExtMBCtlWord3 (TechPtr, 0x00CA , 0, 1);
+        // ExtRC_xCB
+        MemTSendExtMBCtlWord3 (TechPtr, 0x00CB , 0, 1);
+        // ExtRC_xCC
+        // CWL
+        Value8 = (UINT8) (NBPtr->MemNGetMR2CWL (NBPtr) & 0x000000FF);
+        // SRT|ASR
+        Value8 |= 0x40;
+        MemTSendExtMBCtlWord3 (TechPtr, 0x00CC , Value8, 1);
+        // ExtRC_xCD
+        MemTSendExtMBCtlWord3 (TechPtr, 0x00CD , 0, 1);
+        // ExtRC_xCE
+        MemTSendExtMBCtlWord3 (TechPtr, 0x00CE , 0, 1);
+        // ExtRC_xCF
+        MemTSendExtMBCtlWord3 (TechPtr, 0x00CF , 0, 1);
+      }
+    }
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends LRDIMM Control Words to all LRDIMMS
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   OptParam   - Optional parameter
+ *
+ *     @return    FALSE  - The current channel does not have LRDIMM populated
+ *                TRUE   - The current channel has LRDIMM populated
+ */
+BOOLEAN
+STATIC
+MemTLrDimmFreqChgCtrlWrd3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 Dct;
+  MEM_NB_BLOCK    *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      MemNSwitchDCTNb (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        MemTLrDimmControlRegInit3 (TechPtr, NULL);
+      }
+    }
+    return TRUE;
+  }
+  return FALSE;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function prepares LRDIMMs for WL training.
+ *
+ *     @param[in,out]  *TechPtr     - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]  *Wl - Indicates if WL mode should be enabled
+ *
+ *     @return    TRUE - LRDIMMs present
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemTWLPrepareLrdimm3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *Wl
+  )
+{
+  UINT8 Dimm;
+  UINT8 Value8;
+  UINT16 MrsAddress;
+  MEM_NB_BLOCK  *NBPtr;
+  NBPtr = TechPtr->NBPtr;
+  MrsAddress = 0;
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+      if (*(BOOLEAN *) Wl == TRUE) {
+        // Program WrLvOdt
+        NBPtr->SetBitField (NBPtr, BFWrLvOdt, NBPtr->ChannelPtr->PhyWLODT[Dimm]);
+      }
+      if ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << Dimm)) != 0) {
+        if (Dimm == TechPtr->TargetDIMM) {
+          if (*(BOOLEAN *) Wl == TRUE) {
+            //
+            // Select the Target Chipselects
+            //
+            NBPtr->SetBitField (NBPtr, BFMrsChipSel, (Dimm << 1));
+            NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (Dimm << 1));
+            // Program F0RC12 to 1h
+            MemTSendMBCtlWord3 (TechPtr, F0, RC12, 0x01);
+            if (NBPtr->ChannelPtr->Dimms >= 2) {
+              // For two or more LRDIMMs per channel program the buffer RttNom to the
+              // corresponding specifed RttWr termination
+              Value8 = NBPtr->MemNGetDynDramTerm (NBPtr, Dimm << 2);
+            } else {
+              // Program RttNom as normal
+              Value8 = NBPtr->MemNGetDramTerm (NBPtr, Dimm << 2);
+            }
+            if ((Value8 & ((UINT8) 1 << 2)) != 0) {
+              MrsAddress |= ((UINT16) 1 << 9);
+            }
+            if ((Value8 & ((UINT8) 1 << 1)) != 0) {
+              MrsAddress |= ((UINT16) 1 << 6);
+            }
+            if ((Value8 & ((UINT8) 1 << 0)) != 0) {
+              MrsAddress |= ((UINT16) 1 << 2);
+            }
+            NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+          } else {
+            // Program F0RC12 to 0h
+            MemTSendMBCtlWord3 (TechPtr, F0, RC12, 0x00);
+          }
+        }
+      }
+    }
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This send all MR commands to all physical ranks of an LRDIMM
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       *CsPtr     - Target Chip Select
+ *
+ *     @return    FALSE  - The current channel does not have LRDIMM populated
+ *                TRUE   - The current channel has LRDIMM populated
+ */
+BOOLEAN
+STATIC
+MemTSendAllMRCmdsLR3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *CsPtr
+  )
+{
+  UINT8        *SpdBufferPtr;
+  UINT8         Rank;
+  UINT8         PhyRank;
+  UINT8         ChipSel;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  ChipSel = *((UINT8 *) CsPtr);
+
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    //
+    //   For LRDIMMs, MR0, MR2, and MR3 can be broadcast to any physicall ranks behind
+    // each logical rank(CS) by setting MRSAddress[13]. MR1[Rtt_Nom] needs to be programmed
+    // differently per physical rank, so it must target a physical rank using MrsAddress[17:14].
+    // The actual bits used to index the physical rank are determined by the DRAM Capacity.
+    //
+    //   This function will be called once for each CS where CSPresent is set, so each time
+    // it only needs to handle the Physical ranks behind each CS.  If a Dimm is not using some
+    // CS due to Rank Mux, those CSPresent bits will have been already cleared.
+    //
+
+    //
+    // Select target chip select
+    //
+    NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+    //
+    // 13.Send EMRS(2)
+    //
+    MemTEMRS2Lr3 (TechPtr, ChipSel);
+    NBPtr->SetBitField (NBPtr, BFMrsAddressHi, 1);    // Set Address bit 13 to broadcast
+    NBPtr->SendMrsCmd (NBPtr);
+    //
+    // 14.Send EMRS(3). Ordinarily at this time, MrsAddress[2:0]=000b
+    //
+    MemTEMRS33 (TechPtr);
+    NBPtr->SetBitField (NBPtr, BFMrsAddressHi, 1);    // Set Address bit 13 to broadcast
+    NBPtr->SendMrsCmd (NBPtr);
+    //
+    // 15.Send EMRS(1). Send to each physical rank.
+    //
+    MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, ChipSel >> 1);
+    //
+    // Determine first physical rank relative to the LRDIMM for this CS
+    //
+    PhyRank = ((((ChipSel & NBPtr->ChannelPtr->LrDimmLogicalRanks[ChipSel >> 1]) >> 1) & 2) | (ChipSel & 1));
+    for (Rank = 0; Rank < NBPtr->ChannelPtr->LrDimmRankMult[ChipSel >> 1]; Rank++) {
+      MemTEMRS1Lr3 (TechPtr, ChipSel, PhyRank);
+      //
+      // Set Address bit 14, 15, 16, or 17 to select physical rank, relative to the CS, according to the device size
+      //
+      NBPtr->SetBitField (NBPtr, BFMrsAddressHi, Rank << ((SpdBufferPtr[SPD_DENSITY] & 0xF) - 1 ) );
+      NBPtr->SendMrsCmd (NBPtr);
+      //
+      // Index to the next physical rank
+      //
+      PhyRank = PhyRank + NBPtr->ChannelPtr->LrDimmLogicalRanks[ChipSel >> 1];
+    }
+    //
+    // 16.Send MRS with MrsAddress[8]=1(reset the DLL)
+    //
+    MemTMRS3 (TechPtr);
+    NBPtr->SetBitField (NBPtr, BFMrsAddressHi, 1);    // Set Address bit 13 to broadcast
+    NBPtr->SendMrsCmd (NBPtr);
+    //
+    // If LRDIMM, return TRUE to skip sending regular MR commands.
+    //
+    return TRUE;
+  }
+  //
+  // If not LRDIMM, send regular MR commands.
+  //
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the EMRS1 value for an LRDIMM
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]        ChipSel   - Chip select number
+ *     @param[in]        PhyRank   - Physical rank number
+ */
+
+VOID
+STATIC
+MemTEMRS1Lr3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel,
+  IN       UINT8 PhyRank
+  )
+{
+  UINT16       MrsAddress;
+  UINT8        Value8;
+  UINT8        *SpdBufferPtr;
+  UINT8        FreqDiffOffset;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, ChipSel >> 1);
+  FreqDiffOffset = (UINT8) (SPD_FREQ_DIFF_OFFSET * (((NBPtr->DCTPtr->Timings.Speed / 133) - 3) / 2));
+
+  // BA2=0,BA1=0,BA0=1
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 1);
+
+  MrsAddress = 0;
+
+  // program MrsAddress[5,1]=output driver impedance control (DIC): 01b
+  MrsAddress |= ((UINT16) 1 << 1);
+
+  // program MrsAddress[5,1]=output driver impedance control (DIC):
+  // DIC is read from SPD byte 77, 83, or 89 depending on DDR speed
+  Value8 = SpdBufferPtr[SPD_MR1_MR2_800_1066 + FreqDiffOffset] & 3;
+  if ((Value8 & ((UINT8) 1 << 1)) != 0) {
+    MrsAddress |= ((UINT16) 1 << 5);
+  }
+  if ((Value8 & ((UINT8) 1 << 0)) != 0) {
+    MrsAddress |= ((UINT16) 1 << 1);
+  }
+
+  // program MrsAddress[9,6,2]=nominal termination resistance of ODT (RTT):
+  // RttNom is read from SPD byte 77, 83, or 89 depending on DDR speed
+  if (PhyRank <= 1) {
+    Value8 = (SpdBufferPtr[SPD_MR1_MR2_800_1066 + FreqDiffOffset] >> 2) & 7;
+    if ((Value8 & ((UINT8) 1 << 2)) != 0) {
+      MrsAddress |= ((UINT16) 1 << 9);
+    }
+    if ((Value8 & ((UINT8) 1 << 1)) != 0) {
+      MrsAddress |= ((UINT16) 1 << 6);
+    }
+    if ((Value8 & ((UINT8) 1 << 0)) != 0) {
+      MrsAddress |= ((UINT16) 1 << 2);
+    }
+  }
+
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the EMRS2 value for an LRDIMM
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]        ChipSel   - Chip select number
+ */
+
+VOID
+STATIC
+MemTEMRS2Lr3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  )
+{
+  UINT8        RttWr;
+  UINT8        *SpdBufferPtr;
+  UINT8        FreqDiffOffset;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // Save default RttWr
+  RttWr = NBPtr->PsPtr->RttWr[ChipSel];
+
+  // Override RttWr with the value read from SPD byte 77, 83, or 89 depending on DDR speed
+  MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, ChipSel >> 1);
+  FreqDiffOffset = (UINT8) (SPD_FREQ_DIFF_OFFSET * (((NBPtr->DCTPtr->Timings.Speed / 133) - 3) / 2));
+  NBPtr->PsPtr->RttWr[ChipSel] = SpdBufferPtr[SPD_MR1_MR2_800_1066 + FreqDiffOffset] >> 6;
+
+  // Call EMRS2 calculation
+  MemTEMRS23 (TechPtr);
+
+  // Restore RttWr
+  NBPtr->PsPtr->RttWr[ChipSel] = RttWr;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function to determine the Rank Multiplication to use for an LRDIMM
+ *
+ *     @param[in,out]  *TechPtr     - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]  *DimmID      - Dimm ID
+ *
+ *     @return    TRUE - LRDIMM Support is installed and LRDIMMs are present
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemTLrdimmRankMultiplication (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *DimmID
+  )
+{
+  BOOLEAN RetVal;
+  UINT8 *SpdBufferPtr;
+  UINT8 Dimm;
+  UINT8 NumDimmslots;
+  UINT8 DramCapacity;
+  UINT8 Ranks;
+  UINT8 Rows;
+  UINT8 RankMult;
+  MEM_NB_BLOCK  *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  ASSERT (TechPtr != NULL);
+  ASSERT (DimmID != NULL);
+
+  Dimm = *(UINT8*)DimmID;
+  ASSERT (Dimm < MAX_DIMMS_PER_CHANNEL);
+
+  NBPtr = TechPtr->NBPtr;
+  ChannelPtr = NBPtr->ChannelPtr;
+  RetVal = FALSE;
+  RankMult = 0;
+
+  if (!MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm)) {
+    ASSERT (FALSE);
+  }
+
+  NumDimmslots = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                        NBPtr->MCTPtr->SocketId,
+                                        ChannelPtr->ChannelID);
+
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    RetVal = TRUE;
+    //
+    // Determine LRDIMM Rank Multiplication
+    //
+    Ranks = ((SpdBufferPtr[SPD_RANKS] >> 3) & 0x07) + 1;
+    if (Ranks == 5) {
+      Ranks = 8;
+    }
+    DramCapacity = (SpdBufferPtr[SPD_DENSITY] & 0x0F);
+    Rows = 12 + ((SpdBufferPtr[SPD_ROW_SZ] >> 3) & 0x7);
+
+    if (Ranks < 4) {
+      RankMult = 1;
+    } else if (Ranks == 4) {
+      RankMult = (NumDimmslots < 3) ? 1 : 2;
+    } else if (Ranks == 8) {
+      RankMult = ((NumDimmslots < 3) && (DramCapacity < 4)) ? 2 : 4;
+    }
+    //
+    // Save Rank Information
+    //
+    ChannelPtr->LrDimmRankMult[Dimm] = RankMult;
+    ChannelPtr->LrDimmLogicalRanks[Dimm] = Ranks / RankMult;
+    NBPtr->PsPtr->LrdimmRowAddrBits[Dimm] = Rows + (RankMult >> 1);
+    //
+    // Program RankDef
+    //
+    NBPtr->SetBitField (NBPtr, BFRankDef0 + Dimm, (RankMult == 4) ? 3 : RankMult);
+    //
+    // If LrdimmRowAddressBits > 16, then we must be using some CS signals for rank
+    //   multiplication.  If this is the case, then we want to clear the CSPresent bits
+    //   that correspond to those  chipselects.
+    //   If there are 3 DIMMs per channel, then it will always be CS67, if there are
+    //   2DPCH, then DIMM0 will use CS45, and DIMM1 will use CS67.
+    //
+    if ((ChannelPtr->LrDimmLogicalRanks[Dimm] < 4) && (Dimm >= NumDimmslots)) {
+      NBPtr->DCTPtr->Timings.CsPresent &= ~(0x3 << (Dimm << 1));
+      ChannelPtr->LrDimmRankMult[Dimm] = 0;
+      ChannelPtr->LrDimmLogicalRanks[Dimm] = 0;
+      NBPtr->PsPtr->LrdimmRowAddrBits[Dimm] = 0;
+    } else {
+      IDS_HDT_CONSOLE_DEBUG_CODE (
+        if (Dimm < NumDimmslots) {
+          IDS_HDT_CONSOLE (MEM_FLOW,"\tDimm %d: Log. Ranks:%d   Phys. Ranks:%d   RowAddrBits:%d   RankMult:%d\n",
+            Dimm,
+            ChannelPtr->LrDimmLogicalRanks[Dimm],
+            ChannelPtr->LrdimmPhysicalRanks[Dimm],
+            NBPtr->PsPtr->LrdimmRowAddrBits[Dimm],
+            RankMult
+            );
+        }
+      );
+    }
+  }
+  return RetVal;
+}
+
+/* -----------------------------------------------------------------------------
+ *
+ *   This function performs buffer to DRAM training for LRDIMMs
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ */
+
+BOOLEAN
+STATIC
+MemTLrdimmBuf2DramTrain3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK    *NBPtr;
+  UINT8  Dct;
+  UINT8  Dimm;
+  UINT8  ChipSel;
+  UINT16 DimmMask;
+  UINT8  i;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nStart Buffer to DRAM training\n");
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      //
+      // ODM needs to be set after Dram Init
+      //
+      if (NBPtr->StartupSpeed == NBPtr->DCTPtr->Timings.Speed) {
+        for (ChipSel = 1; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+          if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+            if ((NBPtr->DCTPtr->Timings.DimmMirrorPresent & (1 << (ChipSel >> 1))) != 0) {
+              NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + ChipSel, ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + ChipSel)) | ((UINT32)1 << BFOnDimmMirror )));
+            }
+          }
+        }
+      }
+      //
+      // Buffer to DRAM training
+      //
+      for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+        DimmMask = (UINT16)1 << Dimm;
+        if ((NBPtr->ChannelPtr->LrDimmPresent & DimmMask) != 0) {
+          IDS_HDT_CONSOLE (MEM_STATUS, "\t\nDimm %d\n", Dimm);
+          //
+          // Select the Target Chipselects
+          //
+          NBPtr->SetBitField (NBPtr, BFMrsChipSel, (Dimm << 1));
+          NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (Dimm << 1));
+
+          NBPtr->SetBitField (NBPtr, BFLrDimmErrOutMonEn, 1);
+          MemTSendMBCtlWord3 (TechPtr, F2, RC3, 8);
+          // Send F0RC12 with data = 0010b.
+          MemTSendMBCtlWord3 (TechPtr, F0, RC12, 2);
+          //
+          // Wait until D18F2xA0_dct[1:0][RcvParErr]=0 or tCAL * the number of physical ranks expires.
+          //
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t\tWaiting %d ms...\n", 10 * NBPtr->ChannelPtr->LrdimmPhysicalRanks[Dimm]);
+          for (i = 0; i < (NBPtr->ChannelPtr->LrdimmPhysicalRanks[Dimm] * 10); i++) {
+            MemUWait10ns (1000000, MemPtr);
+            //
+            // @todo: Provide option for polling RcvParErr to optimize DRAM bus timing.
+            //
+          }
+          IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tRcvParErr = %02x\n", NBPtr->GetBitField (NBPtr, BFRcvParErr));
+          NBPtr->SetBitField (NBPtr, BFLrDimmErrOutMonEn, 0);
+          MemTSendMBCtlWord3 (TechPtr, F2, RC3, 0);
+          // Configure for normal operation: Send F0RC12 with data = 0000b.
+          MemTSendMBCtlWord3 (TechPtr, F0, RC12, 0);
+        }
+      }
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd Buffer to DRAM training\n");
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function copies trained delays of the first rank of a QR LRDIMM to the third rank
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ */
+
+BOOLEAN
+STATIC
+MemTLrdimmSyncTrainedDlys (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 i;
+  UINT8 Dimm;
+  UINT8 Dct;
+  MEM_NB_BLOCK *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT16 WrDqsDly;
+  UINT16 RcvEnDly;
+  UINT16 RdDqsDly;
+  UINT16 WrDatDly;
+  UINT8  RdDqs__Dly;
+  NBPtr = TechPtr->NBPtr;
+
+  if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tSync LRDIMM Delays to remaining ranks.\n");
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      ChannelPtr = NBPtr->ChannelPtr;
+      for (Dimm = 0; Dimm < 2; Dimm++) {
+        if (ChannelPtr->LrDimmLogicalRanks[Dimm] > 2) {
+          // If logical QR LRDIMM, copy trained delays from first rank to third rank
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t\tDimm %d -> Dimm %d\n",Dimm, Dimm + 2);
+          for (i = 0; i < TechPtr->DlyTableWidth (); i++) {
+            WrDqsDly = ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + i];
+            NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm + 2, i), WrDqsDly);
+            ChannelPtr->WrDqsDlys[(Dimm + 2) * TechPtr->DlyTableWidth () + i] = (UINT8)WrDqsDly;
+
+            RcvEnDly = ChannelPtr->RcvEnDlys[Dimm * TechPtr->DlyTableWidth () + i];
+            NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Dimm + 2, i), RcvEnDly);
+            ChannelPtr->RcvEnDlys[(Dimm + 2) * TechPtr->DlyTableWidth () + i] = RcvEnDly;
+
+            RdDqsDly = ChannelPtr->RdDqsDlys[Dimm * TechPtr->DlyTableWidth () + i];
+            NBPtr->SetTrainDly (NBPtr, AccessRdDqsDly, DIMM_BYTE_ACCESS (Dimm + 2, i), RdDqsDly);
+            ChannelPtr->RdDqsDlys[(Dimm + 2) * TechPtr->DlyTableWidth () + i] = (UINT8)RdDqsDly;
+
+            WrDatDly = ChannelPtr->WrDatDlys[Dimm * TechPtr->DlyTableWidth () + i];
+            NBPtr->SetTrainDly (NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (Dimm + 2, i), WrDatDly);
+            ChannelPtr->WrDatDlys[(Dimm + 2) * TechPtr->DlyTableWidth () + i] = (UINT8)WrDatDly;
+          }
+          if ((ChannelPtr->DimmNibbleAccess & (1 << Dimm)) != 0) {
+            //
+            // If 2D x4 (Not Currently POR for LRDIMMs)
+            //
+          for (i = 0; i < MAX_NUMBER_LANES; i++) {
+            if (ChannelPtr->LrDimmLogicalRanks[Dimm] > 2) {
+              // If logical QR LRDIMM, copy trained delays from first rank to third rank
+                RdDqs__Dly = ChannelPtr->RdDqs__Dlys[Dimm * MAX_NUMBER_LANES + i];
+                NBPtr->SetTrainDly (NBPtr, AccessRdDqs__Dly, DIMM_NBBL_ACCESS (Dimm + 2, i),
+                                    ChannelPtr->RdDqs__Dlys[Dimm * MAX_NUMBER_LANES + i]);
+                ChannelPtr->RdDqs__Dlys[(Dimm + 2) * MAX_NUMBER_LANES + i] = (UINT8)RdDqs__Dly;
+              }
+            }
+          }
+        }
+      }
+    }
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function performs LRDIMM specific tasks during Dimm Presence detection
+ *
+ *     @param[in,out]  *TechPtr     - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]  *DimmID      - Dimm ID
+ *
+ *     @return    TRUE
+ *
+ */
+
+BOOLEAN
+STATIC
+MemTLrdimmPresence (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *DimmID
+  )
+{
+  MEM_NB_BLOCK *NBPtr;
+  UINT32 BufferID;
+  UINT8 Dimm;
+  NBPtr = TechPtr->NBPtr;
+  Dimm = *(UINT8*) DimmID;
+
+  BufferID = MemTLrDimmGetBufferID (TechPtr, Dimm);
+  if ((BufferID == 0x0020B304) || (BufferID == 0x0020B380)) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\tDimm %d: Unsupported LRDIMM Buffer Revision\n", Dimm);
+    PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_LRDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, Dimm, &NBPtr->MemPtr->StdHeader);
+    NBPtr->DCTPtr->Timings.CsTestFail |= (UINT16)0x3 << (Dimm << 1);
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function returns LRDIMM Buffer ID Info from the SPD
+ *
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the Technology Block
+ *     @param[in]       Dimm      - Dimm number
+ *
+ *     @return          Buffer ID Information
+ *
+ */
+
+UINT32
+STATIC
+MemTLrDimmGetBufferID (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm
+  )
+{
+  UINT8   *SpdBufferPtr;
+  UINT32  BufferID;
+
+  BufferID = 0;
+  MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm);
+  BufferID = (SpdBufferPtr[64] << 16) | (SpdBufferPtr[66] << 8) | (SpdBufferPtr[65]);
+  return BufferID;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function implements special case Initialization hooks for LRDIMMs
+ *
+ *     @param[in]     TechPtr    - Tech Block Pointer
+ *     @param[in]     Entrypoint - Entrypoint to indicate when this hook is called
+ *     @param[in]     Dimm       - Dimm being configured when hook is called
+ *     @param[in]     OptParam   - Not Used
+ */
+
+VOID
+STATIC
+MemTLrdimmInitHook (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       LRDIMM_HOOK_ENTRYPOINT Entrypoint,
+  IN       UINT8 Dimm,
+  IN OUT   VOID  *OptParam
+  )
+{
+  MEM_NB_BLOCK    *NBPtr;
+  UINT8         i;
+  CONST UINT16   AfterTstabRcwTable[] = {
+    0x0270, 0x0000,
+    0x0122, 0x0074,
+    0x0124, 0x009B,
+    0x0126, 0x00C2,
+    0x0128, 0x00E8,
+    0x01D2, 0x5942,
+    0x01D4, 0x836D,
+    0x01CE, 0x5942,
+    0x01D0, 0x836D,
+    0x01D6, 0x017F,
+    0x01D8, 0x0000,
+    0x01F0, 0x008E,
+    0x01F2, 0x00BA,
+    0x01F4, 0x00E8,
+    0x01F6, 0x0114,
+    0x0B40, 0x7054,
+    0x0B42, 0xA48A,
+    0x0B3C, 0x7054,
+    0x0B3E, 0xA48A,
+    0x0B38, 0x0100,
+    0x0B3A, 0x0000,
+
+    0x0274, 0x55AA,
+    0x3012, 0x0080,
+    0x3018, 0x6B80
+  };
+  if (MemTLrDimmGetBufferID (TechPtr, Dimm) != 0x0021B304) {
+    return;
+  }
+  NBPtr = TechPtr->NBPtr;
+  switch (Entrypoint) {
+  case AFTER_TSTAB:
+    MemTSendMBCtlWord3 (TechPtr, F14, RC0, 0xB);
+    for ( i = 0 ; i < (sizeof (AfterTstabRcwTable) / sizeof (UINT16)); i += 2 ) {
+      MemTSendExtMBCtlWord3 (TechPtr, AfterTstabRcwTable[i], AfterTstabRcwTable[i + 1], 2);
+    }
+    break;
+  default:
+    //
+    // If a hook entrypoint is called, it should have a case for it.
+    //
+    ASSERT (FALSE);
+    break;
+  }
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtlrdimm3.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtlrdimm3.h
new file mode 100644
index 0000000000..0bb8f7d8c2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtlrdimm3.h
@@ -0,0 +1,133 @@
+/**
+ * @file
+ *
+ * mtlrdimm3.h
+ *
+ * Definitions and declarations for DDR3 LRDIMM support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 27045 $ @e \$Date: 2010-02-22 17:21:31 -0600 (Mon, 22 Feb 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTLRDIMM3_H_
+#define _MTLRDIMM3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define RCW_FN_SELECT 7
+
+#define F0 0
+#define F1 1
+#define F2 2
+#define F3 3
+#define F4 4
+#define F5 5
+#define F6 6
+#define F7 7
+#define F8 8
+#define F9 9
+#define F10 10
+#define F11 11
+#define F12 12
+#define F13 13
+#define F14 14
+#define F15 15
+
+#define RC0 0
+#define RC1 1
+#define RC2 2
+#define RC3 3
+#define RC4 4
+#define RC5 5
+#define RC6 6
+#define RC7 7
+#define RC8 8
+#define RC9 9
+#define RC10 10
+#define RC11 11
+#define RC12 12
+#define RC13 13
+#define RC14 14
+#define RC15 15
+
+#define SPD_NONE             0
+#define SPD_67               67
+#define SPD_68               68
+#define SPD_69               69
+#define SPD_70               70
+#define SPD_71               71
+
+#define SPD_MDQ_800_1066     72
+#define SPD_QXODT_800_1066   73
+#define SPD_MR1_MR2_800_1066 77
+#define SPD_PERSONALITY_BYTE 102
+#define SPD_FREQ_DIFF_OFFSET 6
+
+#define SPECIAL_CASE         0xFF
+#define WAIT_6US             0xF6
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// LRDIMM SPECIALIZED HOOK ENTRY POINTS
+typedef enum {
+  AFTER_TSTAB,          ///< Time point after tStab
+  AFTER_RCW,            ///< Time point after LrDimm Rcw commands are sent
+  BEFORE_BUFFERTRN,     ///< Time point just before Buffer training
+  AFTER_BUFFERTRN,      ///< Time point just after Buffer training
+  BEFORE_HOST_WL,       ///< Time point before host WL
+  AFTER_HOST_WL         ///< Time point after host WL
+} LRDIMM_HOOK_ENTRYPOINT;
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif  /* _MTLRDIMM3_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtot3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtot3.c
new file mode 100644
index 0000000000..a938de6e38
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtot3.c
@@ -0,0 +1,168 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtot3.c
+ *
+ * Technology Non-SPD Timings for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mtot3.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTOT3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function adjusts the Twrwr value for DDR3.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTAdjustTwrwr3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  DCT_STRUCT *DCTPtr;
+
+  DCTPtr = TechPtr->NBPtr->DCTPtr;
+
+  // For DDR3, value 0000b-0001b and >= 1011b of Twrwr is reserved.
+  if (DCTPtr->Timings.Twrwr < 2) {
+    DCTPtr->Timings.Twrwr = 2;
+  } else if (DCTPtr->Timings.Twrwr > 10) {
+    DCTPtr->Timings.Twrwr = 10;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function adjusts the Twrrd value for DDR3.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTAdjustTwrrd3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  DCT_STRUCT *DCTPtr;
+
+  DCTPtr = TechPtr->NBPtr->DCTPtr;
+
+  // For DDR3, value 0000b, 0001b, and > 1010b of Twrrd is reserved.
+  if (DCTPtr->Timings.Twrrd < 2) {
+    DCTPtr->Timings.Twrrd = 2;
+  } else if (DCTPtr->Timings.Twrrd > 10) {
+    DCTPtr->Timings.Twrrd = 10;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets the LD value for DDR3.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  Value of LD
+ */
+
+INT8
+MemTGetLD3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  INT8 LD;
+  MEM_NB_BLOCK *NBPtr;
+  NBPtr = TechPtr->NBPtr;
+  //
+  // For DDR3, BIOS calculates the latency difference (Ld) as equal to read CAS latency minus write CAS
+  // latency, in MEMCLKs (see F2x[1, 0]88[Tcl] and F2x[1, 0]84[Tcwl]) which can be a negative or positive
+  // value.
+  //
+  LD = ((INT8) NBPtr->GetBitField (NBPtr, BFTcl) + 4) - ((INT8) NBPtr->GetBitField (NBPtr, BFTcwl) + 5);
+
+  return LD;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtot3.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtot3.h
new file mode 100644
index 0000000000..dcc3ad7265
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtot3.h
@@ -0,0 +1,91 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtot3.h
+ *
+ * Technology Non-SPD timings for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTOT3_H_
+#define _MTOT3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+VOID
+MemTAdjustTwrwr3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTAdjustTwrrd3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+INT8
+MemTGetLD3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+#endif  /* _MTOT3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtrci3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtrci3.c
new file mode 100644
index 0000000000..79fef4d84c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtrci3.c
@@ -0,0 +1,319 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtrci3.c
+ *
+ * Technology Control word initialization for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mtrci3.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTRCI3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends control words
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTDramControlRegInit3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 ChipSel;
+  UINT8 i;
+  UINT8 RawCard;
+  UINT8 Data;
+  UINT16 CsPresent;
+
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  CsPresent = NBPtr->DCTPtr->Timings.CsPresent;
+
+  MemUWait10ns (800, MemPtr);   // wait 8us TACT must be changed to optimize to 8 MEM CLKs
+
+  // Set EnDramInit to start DRAM initialization
+
+  MemUWait10ns (600, MemPtr);   // wait 6us for PLL LOCK
+
+  for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+    //
+    // If chip select present
+    //
+    if ((CsPresent & ((UINT16)3 << ChipSel)) != 0) {
+      NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+
+      // 2. Program F2x[1, 0]A8[CtrlWordCS]=bit mask for target chip selects.
+      NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (ChipSel & 0xFE));
+
+      RawCard = NBPtr->ChannelPtr->RefRawCard[ChipSel >> 1];
+
+      for (i = 0; i <= 15; i++) {
+        // wait 8us for TMRD, must be changed to optimize to 8 MEM CLKs
+        MemUWait10ns (800, MemPtr);
+        if ((i != 6) && (i != 7)) {
+          Data = MemTGetCtlWord3 (TechPtr, i, RawCard, ChipSel);
+          MemTSendCtlWord3 (TechPtr, i, Data);
+        }
+      }
+    }
+  }
+  MemUWait10ns (600, MemPtr);   // wait 6us for TSTAB
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the ControlRC value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]     CtrlWordNum  -  control Word number.
+ *     @param[in]     RawCard  -  Raw Card
+ *     @param[in]     ChipSel  - Target Chip Select
+ *     @return  Control Word value
+ */
+
+UINT8
+MemTGetCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 CtrlWordNum,
+  IN       UINT8 RawCard,
+  IN       UINT8 ChipSel
+  )
+{
+  UINT8  Data;
+  UINT8  PowerDownMode;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  DCTPtr = TechPtr->NBPtr->DCTPtr;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  Data = 0;  //Default value for all control words is 0
+  switch (CtrlWordNum) {
+  case 0:
+    Data = 0x02;  // DA4=1
+    break;
+  case 1:
+    if (DCTPtr->Timings.DimmSRPresent & ((UINT16) 1 << (ChipSel >> 1))) {
+      Data = 0x0C;  // if single rank, set DBA1 and DBA0
+    }
+    break;
+  case 2:
+    Data = ChannelPtr->CtrlWrd02[ChipSel >> 1];
+    break;
+  case 3:
+    Data = ChannelPtr->CtrlWrd03[ChipSel >> 1];
+    break;
+  case 4:
+    Data = ChannelPtr->CtrlWrd04[ChipSel >> 1];
+    break;
+  case 5:
+    Data = ChannelPtr->CtrlWrd05[ChipSel >> 1];
+    break;
+  case 8:
+    Data = ChannelPtr->CtrlWrd08[ChipSel >> 1];
+    break;
+  case 9:
+    // RC9 = 0xD except when partial powerdown mode is enabled and mix SR/DR or SR/QR configurations,
+    // RC9 should be 0x9 for SR and and 0xD for DR or QR RDIMMs.
+    PowerDownMode = (UINT8) UserOptions.CfgPowerDownMode;
+    PowerDownMode = (!TechPtr->NBPtr->IsSupported[ChannelPDMode]) ? PowerDownMode : 0;
+    IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(TechPtr->NBPtr->MemPtr->StdHeader));
+    if ((PowerDownMode == 1) &&
+        (DCTPtr->Timings.DimmSRPresent & ((UINT16) 1 << (ChipSel >> 1))) &&
+        ((DCTPtr->Timings.DimmDrPresent != 0) || (DCTPtr->Timings.DimmQrPresent != 0))) {
+      Data = 0x09;
+    } else {
+      Data = 0x0D;
+    }
+    break;
+  case 11:
+    Data = CONVERT_VDDIO_TO_ENCODED (TechPtr->RefPtr->DDR3Voltage);
+    break;
+  default:;
+  }
+
+  return (Data & 0x0F);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends control word command
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]     CmdNum  -  control number.
+ *     @param[in]     Value  -  value to send
+ *
+ */
+
+VOID
+MemTSendCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 CmdNum,
+  IN       UINT8 Value
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // 1. Program MrsBank and MrsAddress.
+  //    n = [BA2, A2, A1, A0].
+  //    data = [BA1, BA0, A4, A3].
+  //    Set all other bits in MrsAddress to zero.
+  //
+  NBPtr->SetBitField (NBPtr, BFMrsBank, ((CmdNum & 8) >> 1) | (Value >> 2));
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, ((Value & 3) << 3) | (CmdNum & 7));
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d RC%02d %04x\n", (MemNGetBitFieldNb (NBPtr, BFMrsChipSel) & 7), CmdNum, Value);
+
+  // 2.Set SendCtrlWord=1
+  NBPtr->SetBitField (NBPtr, BFSendCtrlWord, 1);
+  // 3.Wait for BFSendCtrlWord=0
+  NBPtr->PollBitField (NBPtr, BFSendCtrlWord, 0, PCI_ACCESS_TIMEOUT, FALSE);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends specific control words commands before frequency change for certain DRAM buffers.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+FreqChgCtrlWrd3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 ChipSel;
+  UINT16 Speed;
+  UINT16 CsPresent;
+
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  Speed = NBPtr->DCTPtr->Timings.Speed;
+  CsPresent = NBPtr->DCTPtr->Timings.CsPresent;
+
+
+  for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+    //
+    // If chip select present.
+    //
+    if ((CsPresent & ((UINT16)3 << ChipSel)) != 0) {
+
+      NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+      // program F2x[1, 0]A8[CtrlWordCS]=bit mask for target chip selects.
+      NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (ChipSel & 0xFE));
+
+      //wait 8us for TMRD, must be changed to optimize to 8 MEM CLKs
+      MemUWait10ns (800, MemPtr);
+      if (Speed == DDR800_FREQUENCY) {
+        MemTSendCtlWord3 (TechPtr, 0x0A, 0);
+      } else if (Speed == DDR1066_FREQUENCY) {
+        MemTSendCtlWord3 (TechPtr, 0x0A, 1);
+      } else if (Speed == DDR1333_FREQUENCY) {
+        MemTSendCtlWord3 (TechPtr, 0x0A, 2);
+      } else if (Speed == DDR1600_FREQUENCY) {
+        MemTSendCtlWord3 (TechPtr, 0x0A, 3);
+      } else if (Speed == DDR1866_FREQUENCY) {
+        MemTSendCtlWord3 (TechPtr, 0x0A, 4);
+      } else {
+        ASSERT (FALSE);
+      }
+    }
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtrci3.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtrci3.h
new file mode 100644
index 0000000000..6a5d75b2f6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtrci3.h
@@ -0,0 +1,88 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtrci3.h
+ *
+ * Technology control word init for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTRCI3_H_
+#define _MTRCI3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+UINT8
+MemTGetCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 CtrlWordNum,
+  IN       UINT8 RawCard,
+  IN       UINT8 ChipSel
+  );
+
+VOID
+MemTDramControlRegInit3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+#endif  /* _MTRCI3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtsdi3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtsdi3.c
new file mode 100644
index 0000000000..6ce925694c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtsdi3.c
@@ -0,0 +1,503 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtsdi3.c
+ *
+ * Technology Software DRAM Init for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mtsdi3.h"
+#include "mtrci3.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_TECH_DDR3_MTSDI3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates software DRAM init for  both DCTs
+ *   at the same time.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+BOOLEAN
+MemTDramInitSw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 ChipSel;
+
+  MEM_DATA_STRUCT *MemPtr;
+  DIE_STRUCT *MCTPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Dram Init\n");
+  // 3.Program F2x[1,0]7C[EnDramInit]=1
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tEnDramInit = 1 for both DCTs\n");
+  NBPtr->BrdcstSet (NBPtr, BFEnDramInit, 1);
+  NBPtr->PollBitField (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, TRUE);
+
+  // 4.wait 200us
+  MemUWait10ns (20000, MemPtr);
+
+  // 5.Program F2x[1, 0]7C[DeassertMemRstX] = 1.
+  NBPtr->BrdcstSet (NBPtr, BFDeassertMemRstX, 1);
+
+  // 6.wait 500us
+  MemUWait10ns (50000, MemPtr);
+
+  // Do Phy Fence training before sending MRS commands
+  if (!NBPtr->IsSupported[FenceTrnBeforeDramInit]) {
+    AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+        NBPtr->PhyFenceTraining (NBPtr);
+      }
+    }
+  }
+
+  // 7.NOP or deselect & take CKE high
+  NBPtr->BrdcstSet (NBPtr, BFAssertCke, 1);
+
+  // 8.wait 360ns
+  MemUWait10ns (36, MemPtr);
+
+  // The following steps are performed once for each channel with unbuffered DIMMs
+  // and once for each chip select on registered DIMMs:
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+
+      // Enable Dram Parity if appropriate.
+      NBPtr->FamilySpecificHook[EnableParityAfterMemRst] (NBPtr, NULL);
+
+      // The following steps are performed with registered DIMMs only and
+      // must be done for each chip select pair:
+      if (MCTPtr->Status[SbRegistered]) {
+        MemTDramControlRegInit3 (TechPtr);
+      }
+
+      // Initialize LRDIMM's register
+      TechPtr->TechnologySpecificHook[LrdimmControlRegInit] (TechPtr, NULL);
+
+      for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+        if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+          IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+          // if chip select present
+          if (!(TechPtr->TechnologySpecificHook[LrdimmSendAllMRCmds] (TechPtr, &ChipSel))) {
+            MemTSendAllMRCmds3 (TechPtr, ChipSel);
+          }
+          // NOTE: wait 512 clocks for DLL-relock
+          MemUWait10ns (50000, NBPtr->MemPtr);  // wait 500us
+          if (!(MCTPtr->Status[SbRegistered] || MCTPtr->Status[SbLrdimms])) {
+            break;
+          }
+        }
+      }
+
+      // 17.Send two ZQCL commands (to even then odd chip select)
+      NBPtr->sendZQCmd (NBPtr);
+      NBPtr->sendZQCmd (NBPtr);
+    }
+  }
+
+  // 18.Program F2x[1,0]7C[EnDramInit]=0
+  NBPtr->BrdcstSet (NBPtr, BFEnDramInit, 0);
+  NBPtr->PollBitField (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, TRUE);
+  //
+  // For Unbuffered Dimms, Issue MRS for remaining CS without EnDramInit
+  //
+  NBPtr->FamilySpecificHook[SendMrsCmdsPerCs] (NBPtr, NBPtr);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "End Dram Init\n\n");
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the EMRS1 value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]        Wl - Indicates if WL mode should be enabled
+ *     @param[in]        TargetDIMM - DIMM target for WL
+ */
+
+VOID
+MemTEMRS13 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       BOOLEAN Wl,
+  IN       UINT8 TargetDIMM
+  )
+{
+  UINT16 MrsAddress;
+  UINT8 MaxDimmPerCH;
+  UINT8 ChipSel;
+  UINT8  Value8;
+
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MaxDimmPerCH = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                        NBPtr->MCTPtr->SocketId,
+                                        NBPtr->ChannelPtr->ChannelID);
+  ChipSel = (UINT8) (0x0FF & NBPtr->GetBitField (NBPtr, BFMrsChipSel));
+
+  // BA2=0,BA1=0,BA0=1
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 1);
+
+  MrsAddress = 0;
+
+  // program MrsAddress[5,1]=output driver impedance control (DIC):
+  // based on F2x[1,0]84[DrvImpCtrl]
+  if (!(NBPtr->IsSupported[CheckDrvImpCtrl])) {
+    Value8 = (UINT8)NBPtr->GetBitField (NBPtr, BFDrvImpCtrl);
+    if ((Value8 & ((UINT8) 1 << 1)) != 0) {
+      MrsAddress |= ((UINT16) 1 << 5);
+    }
+    if ((Value8 & ((UINT8) 1 << 0)) != 0) {
+      MrsAddress |= ((UINT16) 1 << 1);
+    }
+  } else {
+    MrsAddress |= ((UINT16) 1 << 1);
+  }
+  // program MrsAddress[9,6,2]=nominal termination resistance of ODT (RTT):
+  // Different CS may have different RTT.
+  //
+  Value8 = NBPtr->MemNGetDramTerm (NBPtr, ChipSel);
+
+  //
+  // If Write Leveling this DIMM
+  //
+  if (Wl) {
+    if ((ChipSel >> 1) == TargetDIMM) {
+      // Program MrsAddress[7] = 1 for Write leveling enable
+      MrsAddress |= ((UINT16) 1 << 7);
+      if (ChipSel & 1) {
+        // Output buffer disabled, MrsAddress[7] (Qoff = 1)
+        MrsAddress |= ((UINT16) 1 << 12);
+      }
+      //  Set Rtt_Nom = Rtt_Wr if there are 2 or more dimms
+      if ((NBPtr->ChannelPtr->DimmQrPresent != 0) || (NBPtr->ChannelPtr->Dimms >= 2)) {
+        Value8 = NBPtr->MemNGetDynDramTerm (NBPtr, ChipSel);
+      } else if (NBPtr->IsSupported[WlRttNomFor1of3Cfg] && (MaxDimmPerCH == 3)) {
+        // For some family, set Rtt_Nom = Rtt_Wr in one of three DIMMs per channel configurations
+        Value8 = NBPtr->MemNGetDynDramTerm (NBPtr, ChipSel);
+      }
+    }
+  }
+  //
+  // Turn off Rtt_Nom (DramTerm=0) for certain CS in certain configs.
+  //
+  // All odd CS for 4 Dimm Systems
+  if (MaxDimmPerCH == 4) {
+    if (ChipSel & 0x01) {
+      Value8 = 0;
+    }
+  // CS 1 and 5 for 3 Dimm configs
+  } else if (MaxDimmPerCH == 3) {
+    if ((ChipSel == 1) || (ChipSel == 5)) {
+      Value8 = 0;
+    }
+  }
+  // All odd CS of any QR Dimms
+  if ((NBPtr->ChannelPtr->DimmQrPresent & ((UINT8) (1 << (ChipSel >> 1)))) != 0) {
+    if (ChipSel & 0x01) {
+      Value8 = 0;
+    }
+  }
+  if ((Value8 & ((UINT8) 1 << 2)) != 0) {
+    MrsAddress |= ((UINT16) 1 << 9);
+  }
+  if ((Value8 & ((UINT8) 1 << 1)) != 0) {
+    MrsAddress |= ((UINT16) 1 << 6);
+  }
+  if ((Value8 & ((UINT8) 1 << 0)) != 0) {
+    MrsAddress |= ((UINT16) 1 << 2);
+  }
+
+  // program MrsAddress[12]=output disable (QOFF):
+  // based on F2x[1,0]84[Qoff]
+
+  if (!NBPtr->IsSupported[CheckQoff]) {
+    if (NBPtr->GetBitField (NBPtr, BFQoff) != 0) {
+      MrsAddress |= ((UINT16) 1 << 12);
+    }
+  }
+
+  // program MrsAddress[11]=TDQS:
+  // based on F2x[1,0]94[RDqsEn]
+
+  if ((NBPtr->DCTPtr->Timings.Dimmx4Present != 0) && (NBPtr->DCTPtr->Timings.Dimmx8Present != 0)) {
+    if (!(NBPtr->IsSupported[SetTDqsForx8DimmOnly]) || ((NBPtr->DCTPtr->Timings.Dimmx8Present & ((UINT8) 1 << (ChipSel >> 1))) != 0)) {
+      MrsAddress |= ((UINT16) 1 << 11);
+    }
+  }
+
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the EMRS2 value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTEMRS23 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT32 MrsAddress;
+  UINT8 DramTermDyn;
+  UINT8 MaxDimmPerCH;
+  UINT8 ChipSel;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  MaxDimmPerCH = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID );
+  ChipSel = (UINT8) (0x0FF & NBPtr->GetBitField (NBPtr, BFMrsChipSel));
+
+  // BA2=0,BA1=1,BA0=0
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 2);
+
+  // program MrsAddress[5:3]=CAS write latency (CWL):
+  MrsAddress = NBPtr->MemNGetMR2CWL (NBPtr);
+
+  // program MrsAddress[6]=auto self refresh method (ASR):
+  // program MrsAddress[7]=self refresh temperature range (SRT):
+  MrsAddress |= 1 << 6;
+  MrsAddress &= ( ~ (1 << 7));
+
+  // program MrsAddress[10:9]=dynamic termination during writes (RTT_WR):
+  DramTermDyn = NBPtr->MemNGetDynDramTerm (NBPtr, ChipSel);
+  // Special Case for 1 DR Unbuffered Dimm in 3 Dimm/Ch
+  if (!(NBPtr->MCTPtr->Status[SbRegistered])) {
+    if (MaxDimmPerCH == 3) {
+      if (NBPtr->ChannelPtr->Dimms == 1) {
+        if ((NBPtr->ChannelPtr->DimmDrPresent & ((UINT8) (1 << (ChipSel >> 1)))) != 0) {
+          DramTermDyn = 1;
+        }
+      }
+    }
+  }
+  MrsAddress |= (UINT16) DramTermDyn << 9;
+
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the EMRS3 value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTEMRS33 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // BA2=0,BA1=1,BA0=1
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 3);
+
+  // program MrsAddress[1:0]=multi purpose register address location
+  // (MPR Location):based on F2x[1,0]84[MprLoc]
+  // program MrsAddress[2]=multi purpose register
+  // (MPR):based on F2x[1,0]84[MprEn]
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, (NBPtr->GetBitField (NBPtr, BFDramMRSReg) >> 24) & 0x0007);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This sets MRS value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTMRS3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT32 MrsAddress;
+  MEM_NB_BLOCK  *NBPtr;
+  UINT32 Ppd;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // BA2=0,BA1=0,BA0=0
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 0);
+
+  // program MrsAddress[1:0]=burst length and control method
+  // (BL):based on F2x[1,0]84[BurstCtrl]
+  MrsAddress = NBPtr->GetBitField (NBPtr, BFBurstCtrl);
+
+  // program MrsAddress[3]=1 (BT):interleaved
+  MrsAddress |= (UINT16) 1 << 3;
+
+  // program MrsAddress[6:4,2]=read CAS latency
+  MrsAddress |= NBPtr->MemNGetMR0CL (NBPtr);
+
+  // program MrsAddress[11:9]=write recovery for auto-precharge
+  MrsAddress |= NBPtr->MemNGetMR0WR (NBPtr);
+
+  // program MrsAddress[12] (PPD):based on F2x[1,0]84[PChgPDModeSel]
+  Ppd = NBPtr->GetBitField (NBPtr, BFPchgPDModeSel);
+  NBPtr->FamilySpecificHook[MR0_PPD] (NBPtr, &Ppd);
+  IDS_OPTION_HOOK (IDS_MEM_MR0, &Ppd, &TechPtr->NBPtr->MemPtr->StdHeader);
+  MrsAddress |= Ppd << 12;
+
+  // program MrsAddress[8]=1 (DLL):DLL reset
+  MrsAddress |= (UINT32) 1 << 8;
+
+  // During memory initialization, the value sent to MR0 is saved for S3 resume
+  NBPtr->MemNSaveMR0 (NBPtr, MrsAddress);
+
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This send all MR commands to a rank in sequence 2-3-1-0
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       ChipSel    - Target Chip Select
+ */
+
+VOID
+MemTSendAllMRCmds3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+
+  // 13.Send EMRS(2)
+  MemTEMRS23 (TechPtr);
+  AGESA_TESTPOINT (TpProcMemSendMRS2, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->SendMrsCmd (NBPtr);
+
+  // 14.Send EMRS(3). Ordinarily at this time, MrsAddress[2:0]=000b
+  MemTEMRS33 (TechPtr);
+  AGESA_TESTPOINT (TpProcMemSendMRS3, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->SendMrsCmd (NBPtr);
+
+  // 15.Send EMRS(1).
+  MemTEMRS13 (TechPtr, FALSE, (ChipSel >> 1));
+  AGESA_TESTPOINT (TpProcMemSendMRS1, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->SendMrsCmd (NBPtr);
+
+  // 16.Send MRS with MrsAddress[8]=1(reset the DLL)
+  MemTMRS3 (TechPtr);
+  AGESA_TESTPOINT (TpProcMemSendMRS0, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->SendMrsCmd (NBPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtsdi3.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtsdi3.h
new file mode 100644
index 0000000000..80dd1cd21e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtsdi3.h
@@ -0,0 +1,97 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtsdi3.h
+ *
+ * Technology software DRAM init for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTSDI3_H_
+#define _MTSDI3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+MemTEMRS33 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTMRS3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTEMRS13 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       BOOLEAN Wl,
+  IN       UINT8 TargetDIMM
+  );
+
+VOID
+MemTEMRS23 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+#endif  /* _MTSDI3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtspd3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtspd3.c
new file mode 100644
index 0000000000..d61c0657f7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtspd3.c
@@ -0,0 +1,1191 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtspd3.c
+ *
+ * Technology SPD supporting functions for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 56379 $ @e \$Date: 2011-07-12 14:14:49 -0600 (Tue, 12 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mu.h"
+#include "mtspd3.h"
+#include "mftds.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTSPD3_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemTCRCCheck3 (
+  IN OUT   UINT8 *SPDPtr
+  );
+
+UINT8
+STATIC
+MemTSPDGetTCL3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+STATIC
+MemTCheckBankAddr3 (
+  IN       UINT8 Encode,
+     OUT   UINT8 *Index
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the DRAM mode
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - indicates that the DRAM mode is set to DDR3
+ */
+
+BOOLEAN
+MemTSetDramMode3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFLegacyBiosMode, 0);
+  TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFDdr3Mode, 1);
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function determines if DIMMs are present. It checks checksum and interrogates the SPDs
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE  - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTDIMMPresence3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 i;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  UINT8 *SpdBufferPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  MEM_NB_BLOCK *NBPtr;
+  BOOLEAN SPDCtrl;
+  UINT8 Devwidth;
+  UINT8 MaxDimms;
+  UINT8 NumDimmslots;
+  UINT8 Value8;
+  UINT16  DimmMask;
+  UINT32 DimmValidMask;
+
+  NBPtr = TechPtr->NBPtr;
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  SPDCtrl = UserOptions.CfgIgnoreSpdChecksum;
+  DimmValidMask = 0;
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+    for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+      NBPtr->SwitchChannel (NBPtr, Channel);
+      ChannelPtr = NBPtr->ChannelPtr;
+      ChannelPtr->DimmQrPresent = 0;
+      //
+      // Get the maximum number of DIMMs
+      //
+      MaxDimms = MAX_DIMMS_PER_CHANNEL;
+      NumDimmslots = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                            MCTPtr->SocketId,
+                                            ChannelPtr->ChannelID);
+      DimmValidMask |= (NumDimmslots == 3) ? 0x7 : 0x3;
+
+      for (i = 0; i < MaxDimms; i++) {
+        //  Bitmask representing dimm #i.
+        DimmMask = (UINT16)1 << i;
+        //
+        if (MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, i)) {
+          MCTPtr->DimmPresent |= DimmMask;
+          //
+          //  Check for valid checksum value
+          //
+          AGESA_TESTPOINT (TpProcMemSPDChecking, &(NBPtr->MemPtr->StdHeader));
+          if (SpdBufferPtr[SPD_TYPE] == JED_DDR3SDRAM) {
+            ChannelPtr->ChDimmValid |= DimmMask;
+            MCTPtr->DimmValid |= DimmMask;
+          } else {
+            // Current socket is set up to only support DDR3 dimms.
+            IDS_ERROR_TRAP;
+          }
+          if (!MemTCRCCheck3 (SpdBufferPtr) && !SPDCtrl) {
+            //
+            // NV_SPDCHK_RESTRT is set to 0,
+            // cannot ignore faulty SPD checksum
+            //
+            //  Indicate checksum error
+            ChannelPtr->DimmSpdCse |= DimmMask;
+            PutEventLog (AGESA_ERROR, MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+            SetMemError (AGESA_ERROR, MCTPtr);
+          }
+          //
+          //  Check module type information.
+          //
+          if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_LRDIMM) {
+            //
+            // LRDIMMS
+            //
+            if (i < NumDimmslots) {
+              ChannelPtr->LrDimmPresent |= DimmMask;
+              MCTPtr->LrDimmPresent |= DimmMask;
+
+              if (!UserOptions.CfgMemoryLRDimmCapable) {
+                PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_LRDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+                IDS_ERROR_TRAP;
+              }
+              TechPtr->TechnologySpecificHook[LrdimmPresence] (TechPtr, &i);
+            }
+          }
+          if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_RDIMM || SpdBufferPtr[SPD_DIMM_TYPE] == JED_MINIRDIMM) {
+            //
+            // RDIMMS
+            //
+            ChannelPtr->RegDimmPresent |= DimmMask;
+            MCTPtr->RegDimmPresent |= DimmMask;
+            if (!UserOptions.CfgMemoryRDimmCapable) {
+              PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_RDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+              IDS_ERROR_TRAP;
+            }
+          }
+          if ((SpdBufferPtr[SPD_DIMM_TYPE] == JED_UDIMM) && !UserOptions.CfgMemoryUDimmCapable) {
+            PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_UDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+            IDS_ERROR_TRAP;
+          }
+          if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_SODIMM) {
+            ChannelPtr->SODimmPresent |= DimmMask;
+            if (!UserOptions.CfgMemorySODimmCapable) {
+              PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_SODIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+              IDS_ERROR_TRAP;
+            }
+          }
+          //
+          //  Check error correction type
+          //
+          if ((SpdBufferPtr[SPD_ECCBITS] & JED_ECC) != 0) {
+            MCTPtr->DimmEccPresent |= DimmMask;  //  Dimm has ECC
+          }
+          //
+          //  Get the Dimm width data
+          //
+          Devwidth = SpdBufferPtr[SPD_DEV_WIDTH] & 0x7;
+          switch (Devwidth) {
+          case 0:
+            ChannelPtr->Dimmx4Present |= DimmMask;
+            ChannelPtr->DimmNibbleAccess |= DimmMask;
+            Devwidth = 4;
+            break;
+          case 1:
+            ChannelPtr->Dimmx8Present |= DimmMask;
+            Devwidth = 8;
+            break;
+          case 2:
+            ChannelPtr->Dimmx16Present |= DimmMask;
+            Devwidth = 16;
+            break;
+          default:
+            IDS_ERROR_TRAP;
+          }
+          //
+          //  Check for 'analysis probe installed'
+          // if (SpdBufferPtr[SPD_ATTRIB] & JED_PROBE_MSK)
+          //
+          //  Determine the geometry of the DIMM module
+          // if (SpdBufferPtr[SPD_DM_BANKS] & SP_DPL_BIT)
+          //
+          //  specify the number of ranks
+          //
+          Value8 = ((SpdBufferPtr[SPD_RANKS] >> 3) & 0x07) + 1;
+          if (Value8 == 5) {
+            // Octal Rank
+            Value8 = 8;
+          }
+          //
+          // For LRDIMMS we will assume that if there are at least 4 Physical ranks, then it Could be used
+          // as a QR RDIMM with a rank Mux of x1 and therefore all four CS will be used. So an 8R LRDIMM will
+          // be marked as a QR even if Rank multiplication allows it to use only 2 logical ranks.
+          //
+          if ((ChannelPtr->LrDimmPresent & DimmMask) != 0) {
+            //
+            // LRDIMM Physical Ranks
+            //
+            ChannelPtr->LrdimmPhysicalRanks[i] = Value8;
+          }
+          if (Value8 > 2) {
+            if (!UserOptions.CfgMemoryQuadRankCapable) {
+              PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_QRDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+            }
+            //
+            // Mark this Dimm as Quad Rank
+            //
+            ChannelPtr->DimmQrPresent |= DimmMask;
+            Value8 = 2;
+          } else if (Value8 == 2) {
+            ChannelPtr->DimmDrPresent |= DimmMask;   //  Dual rank dimms
+          } else {
+            ChannelPtr->DimmSRPresent |= DimmMask;   //  Single rank dimms
+          }
+          //
+          //  Calculate bus loading per Channel
+          if (Devwidth == 16) {
+            Devwidth = 4;
+          } else if (Devwidth == 4) {
+            Devwidth = 16;
+          }
+          //
+          //  Double Addr bus load value for dual rank DIMMs (Unless LRDIMM)
+          //
+          if (((ChannelPtr->LrDimmPresent & DimmMask) == 0) && (Value8 == 2) ) {
+            Devwidth = Devwidth << 1;
+          }
+          //
+          ChannelPtr->Ranks = ChannelPtr->Ranks + Value8;
+          ChannelPtr->Loads = ChannelPtr->Loads + Devwidth;
+          if ((i < NumDimmslots) || ((ChannelPtr->DimmQrPresent & DimmMask) == 0)) {
+            ChannelPtr->Dimms++;
+          }
+          //
+          // Check address mirror support for Unbuffered Dimms or LRDimms
+          //
+          if ((ChannelPtr->RegDimmPresent & DimmMask) == 0) {
+            if ((SpdBufferPtr[SPD_ADDRMAP] & 1) != 0) {
+              ChannelPtr->DimmMirrorPresent |= DimmMask;
+            }
+          }
+          //
+          // Get byte62: Reference Raw Card information
+          //
+          ChannelPtr->RefRawCard[i] = SpdBufferPtr[SPD_RAWCARD] & 0x1F;
+          //
+          // Get control word values for RC3, RC4 and RC5
+          //
+          ChannelPtr->CtrlWrd03[i] = SpdBufferPtr[SPD_CTLWRD03] >> 4;
+          ChannelPtr->CtrlWrd04[i] = SpdBufferPtr[SPD_CTLWRD04] & 0x0F;
+          ChannelPtr->CtrlWrd05[i] = SpdBufferPtr[SPD_CTLWRD05] >> 4;
+          //
+          // Temporarily store info. of SPD byte 63 into CtrlWrd02(s),
+          // and they will be used late to calculate real RC2 and RC8 value
+          //
+          ChannelPtr->CtrlWrd02[i] = SpdBufferPtr[SPD_ADDRMAP] & 0x03;
+          //
+          // Copy the number of registers to the Ps Block to persist across frequency changes
+          //
+          NBPtr->PsPtr->NumOfReg[i] = SpdBufferPtr[SPD_ADDRMAP] & 0x03;
+          //
+          // Workaround for early revisions of DIMMs which SPD byte 63 is 0
+          //
+          if (NBPtr->PsPtr->NumOfReg[i] == JED_UNDEFINED) {
+            NBPtr->PsPtr->NumOfReg[i] = 1;
+          }
+        } // if DIMM present
+      } // Dimm loop
+
+      //
+      // DimmNibbleAccess indicates that a DIMM will use nibble signaling and use nibble training.
+      // LRDIMMs will not use Nibble based signaling even if x4 parts are present.
+      //
+      if (ChannelPtr->LrDimmPresent != 0) {
+        ChannelPtr->DimmNibbleAccess = 0;
+      }
+
+      if (Channel == 0) {
+        DCTPtr->Timings.DctDimmValid = ChannelPtr->ChDimmValid;
+        DCTPtr->Timings.DimmMirrorPresent = ChannelPtr->DimmMirrorPresent;
+        DCTPtr->Timings.DimmSpdCse = ChannelPtr->DimmSpdCse;
+        DCTPtr->Timings.DimmQrPresent = ChannelPtr->DimmQrPresent;
+        DCTPtr->Timings.DimmDrPresent = ChannelPtr->DimmDrPresent;
+        DCTPtr->Timings.DimmSRPresent = ChannelPtr->DimmSRPresent;
+        DCTPtr->Timings.Dimmx4Present = ChannelPtr->Dimmx4Present;
+        DCTPtr->Timings.Dimmx8Present = ChannelPtr->Dimmx8Present;
+        DCTPtr->Timings.Dimmx16Present = ChannelPtr->Dimmx16Present;
+      }
+      if ((Channel != 1) || (Dct != 1)) {
+        MCTPtr->DimmPresent <<= 8;
+        MCTPtr->DimmValid <<= 8;
+        MCTPtr->RegDimmPresent <<= 8;
+        MCTPtr->LrDimmPresent <<= 8;
+        MCTPtr->DimmEccPresent <<= 8;
+        MCTPtr->DimmParPresent <<= 8;
+        DimmValidMask <<= 8;
+      }
+    } // Channel loop
+  } // DCT loop
+
+  //  If we have DIMMs, some further general characteristics checking
+  if (MCTPtr->DimmValid != 0) {
+    //  If there are registered dimms, all the dimms must be registered
+    if (MCTPtr->RegDimmPresent == MCTPtr->DimmValid) {
+      //  All dimms registered
+      MCTPtr->Status[SbRegistered] = TRUE;
+      MCTPtr->Status[SbParDimms] = TRUE;  //  All DDR3 RDIMMs are parity capable
+      TechPtr->SetDqsEccTmgs = MemTSetDQSEccTmgsRDdr3; // Change the function pointer for DQS ECC timing
+    } else if (MCTPtr->RegDimmPresent != 0) {
+      //  We have an illegal DIMM mismatch
+      PutEventLog (AGESA_FATAL, MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_FATAL, MCTPtr);
+    }
+    //  If there are LrDimms, all the dimms must be LrDimms
+    if (MCTPtr->LrDimmPresent == (MCTPtr->DimmValid & DimmValidMask)) {
+      //  All dimms LRDIMMs
+      MCTPtr->Status[SbLrdimms] = TRUE;
+    MCTPtr->Status[SbParDimms] = TRUE;  //  All DDR3 RDIMMs are parity capable
+    } else if (MCTPtr->LrDimmPresent != 0) {
+      //  We have an illegal DIMM mismatch
+      PutEventLog (AGESA_FATAL, MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_FATAL, MCTPtr);
+    }
+
+    //  check the ECC capability of the DIMMs
+    if (MCTPtr->DimmEccPresent == MCTPtr->DimmValid) {
+      MCTPtr->Status[SbEccDimms] = TRUE;  //  All dimms ECC capable
+    }
+  } else {
+  }
+
+  NBPtr->SwitchDCT (NBPtr, 0);
+  NBPtr->SwitchChannel (NBPtr, 0);
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function finds the maximum frequency that each channel is capable to run at.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE  - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDGetTargetSpeed3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 *SpdBufferPtr;
+  UINT8 Dimm;
+  UINT8 Dct;
+  UINT8 Channel;
+  INT32 MTB_ps;
+  INT32 FTB_ps;
+  INT32 TCKmin_ps;
+  INT32 Value32;
+  MEM_NB_BLOCK *NBPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+    TCKmin_ps = 0;
+    for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+      NBPtr->SwitchChannel (NBPtr, Channel);
+      ChannelPtr = NBPtr->ChannelPtr;
+      for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+        if ((ChannelPtr->ChDimmValid & ((UINT8)1 << Dimm)) != 0) {
+          MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm);
+
+          // Determine tCKmin(all) which is the largest tCKmin
+          // value for all modules on the memory Channel (SPD byte 12).
+          //
+          MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR];
+          FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF);
+          Value32 = (MTB_ps * SpdBufferPtr[SPD_TCK]) + (FTB_ps * (INT8) SpdBufferPtr[SPD_TCK_FTB]) ;
+          if (TCKmin_ps < Value32) {
+            TCKmin_ps = Value32;
+          }
+        }
+      }
+    }
+    if (TCKmin_ps <= 1071) {
+      DCTPtr->Timings.TargetSpeed = DDR1866_FREQUENCY;
+    } else if (TCKmin_ps <= 1250) {
+      DCTPtr->Timings.TargetSpeed = DDR1600_FREQUENCY;
+    } else if (TCKmin_ps <= 1500) {
+      DCTPtr->Timings.TargetSpeed = DDR1333_FREQUENCY;
+    } else if (TCKmin_ps <= 1875) {
+      DCTPtr->Timings.TargetSpeed = DDR1066_FREQUENCY;
+    } else if (TCKmin_ps <= 2500) {
+      DCTPtr->Timings.TargetSpeed = DDR800_FREQUENCY;
+    } else {
+      DCTPtr->Timings.TargetSpeed = DDR667_FREQUENCY;
+    }
+  }
+
+  // Ensure the target speed can be applied to all channels of the current node
+  NBPtr->SyncTargetSpeed (NBPtr);
+
+  // Set the start-up frequency
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    NBPtr->DCTPtr->Timings.Speed = TechPtr->NBPtr->StartupSpeed;
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function check the symmetry of DIMM pairs (DIMM on Channel A matching with
+ *   DIMM on Channel B), the overall DIMM population, and determine the width mode:
+ *   64-bit, 64-bit muxed, 128-bit.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE  - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDCalcWidth3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 *SpdBufferAPtr;
+  UINT8 *SpdBufferBPtr;
+  MEM_NB_BLOCK *NBPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  UINT8 i;
+  UINT16 DimmMask;
+  UINT8 UngangMode;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  UngangMode = UserOptions.CfgMemoryModeUnganged;
+  // Does not support ganged mode for DDR3 dimms
+  ASSERT (UngangMode);
+  IDS_OPTION_HOOK (IDS_GANGING_MODE, &UngangMode, &(NBPtr->MemPtr->StdHeader));
+
+  //  Check symmetry of channel A and channel B dimms for 128-bit mode
+  //  capability.
+  //
+  AGESA_TESTPOINT (TpProcMemModeChecking, &(NBPtr->MemPtr->StdHeader));
+  i = 0;
+  if (!UngangMode) {
+    if (MCTPtr->DctData[0].Timings.DctDimmValid == MCTPtr->DctData[1].Timings.DctDimmValid) {
+      for (; i < MAX_DIMMS_PER_CHANNEL; i++) {
+        DimmMask = (UINT16)1 << i;
+        if ((DCTPtr->Timings.DctDimmValid & DimmMask) != 0) {
+          NBPtr->SwitchDCT (NBPtr, 0);
+          MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferAPtr, i);
+          NBPtr->SwitchDCT (NBPtr, 1);
+          MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferBPtr, i);
+          // compare rows and columns
+          if ((SpdBufferAPtr[SPD_ROW_SZ]&0x3F) != (SpdBufferBPtr[SPD_ROW_SZ]&0x3F)) {
+            break;
+          }
+          if ((SpdBufferAPtr[SPD_DENSITY]&0x0F) != (SpdBufferBPtr[SPD_DENSITY]&0x0F)) {
+            break;
+          }
+          // compare ranks and devwidth
+          if ((SpdBufferAPtr[SPD_DEV_WIDTH]&0x7F) != (SpdBufferBPtr[SPD_DEV_WIDTH]&0x7F)) {
+            break;
+          }
+        }
+      }
+    }
+    if (i < MAX_DIMMS_PER_CHANNEL) {
+      PutEventLog (AGESA_ALERT, MEM_ALERT_ORG_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_ALERT, MCTPtr);
+    } else {
+      NBPtr->Ganged = TRUE;
+      MCTPtr->GangedMode = TRUE;
+      MCTPtr->Status[Sb128bitmode] = TRUE;
+      NBPtr->SetBitField (NBPtr, BFDctGangEn, 1);
+    }
+  }
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       Initialize DCT Timing registers as per DIMM SPD.
+ *       For primary timing (T, CL) use best case T value.
+ *       For secondary timing params., use most aggressive settings
+ *           of slowest DIMM.
+ *
+ *   Note:
+ *   There are three components to determining "maximum frequency": SPD component,
+ *   Bus load component, and "Preset" max frequency component.
+ *   The SPD component is a function of the min cycle time specified by each DIMM,
+ *   and the interaction of cycle times from all DIMMs in conjunction with CAS
+ *   latency.  The SPD component only applies when user timing mode is 'Auto'.
+ *
+ *   The Bus load component is a limiting factor determined by electrical
+ *   characteristics on the bus as a result of varying number of device loads.  The
+ *   Bus load component is specific to each platform but may also be a function of
+ *   other factors.  The bus load component only applies when user timing mode is
+ * ' Auto'.
+ *
+ *   The Preset component is subdivided into three items and is the minimum of
+ *   the set: Silicon revision, user limit setting when user timing mode is 'Auto' and
+ *   memclock mode is 'Limit', OEM build specification of the maximum frequency.
+ *   The Preset component only applies when user timing mode is 'Auto'.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE  - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTAutoCycTiming3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  CONST UINT8 SpdIndexes[] = {
+    SPD_TRCD,
+    SPD_TRP,
+    SPD_TRTP,
+    SPD_TRAS,
+    SPD_TRC,
+    SPD_TWR,
+    SPD_TRRD,
+    SPD_TWTR,
+    SPD_TFAW
+  };
+
+  CONST UINT8 SpdFTBIndexes[] = {
+    SPD_TRCD_FTB,
+    SPD_TRP_FTB,
+    0,
+    0,
+    SPD_TRC_FTB,
+    0,
+    0,
+    0,
+    0
+  };
+
+  UINT8  *SpdBufferPtr;
+  INT32  MiniMaxTmg[GET_SIZE_OF (SpdIndexes)];
+  UINT8  MiniMaxTrfc[4];
+
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_NB_BLOCK *NBPtr;
+  UINT16 DimmMask;
+  INT32 Value32;
+  INT32 MTB_ps;
+  INT32 FTB_ps;
+  INT32 TCK_ps;
+  UINT8 i;
+  UINT8 j;
+  UINT8 Value8;
+  UINT8  *StatTmgPtr;
+  UINT16 *StatDimmTmgPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  // initialize mini-max arrays
+  for (j = 0; j < GET_SIZE_OF (MiniMaxTmg); j++) {
+    MiniMaxTmg[j] = 0;
+  }
+  for (j = 0; j < GET_SIZE_OF (MiniMaxTrfc); j++) {
+    MiniMaxTrfc[j] = 0;
+  }
+
+  // ======================================================================
+  //  Get primary timing (CAS Latency and Cycle Time)
+  // ======================================================================
+  //  Get OEM specific load variant max
+  //
+
+  //======================================================================
+  // Gather all DIMM mini-max values for cycle timing data
+  //======================================================================
+  //
+  DimmMask = 1;
+  for (i = 0; i < (MAX_CS_PER_CHANNEL / 2); i++) {
+    if ((DCTPtr->Timings.DctDimmValid & DimmMask) != 0) {
+      MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, i);
+      MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR];
+      FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF);
+
+      for (j = 0; j < GET_SIZE_OF (SpdIndexes); j++) {
+        Value32 = (UINT16)SpdBufferPtr[SpdIndexes[j]];
+        if (SpdIndexes[j] == SPD_TRC) {
+          Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TRC] & 0xF0) << 4;
+        } else if (SpdIndexes[j] == SPD_TRAS) {
+          Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TRAS] & 0x0F) << 8;
+        } else if (SpdIndexes[j] == SPD_TFAW) {
+          Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TFAW] & 0x0F) << 8;
+        }
+
+        Value32 *= MTB_ps;
+        if (SpdFTBIndexes[j] != 0) {
+          Value32 += (FTB_ps * (INT8) SpdBufferPtr[SpdFTBIndexes[j]]) ;
+        }
+        if (MiniMaxTmg[j] < Value32) {
+          MiniMaxTmg[j] = Value32;
+        }
+      }
+
+      //  get Trfc0 - Trfc3 values
+      Value8 = SpdBufferPtr[SPD_DENSITY] & 0x0F;
+      if (MiniMaxTrfc[i] < Value8) {
+        MiniMaxTrfc[i] = Value8;
+      }
+    }
+    DimmMask <<= 1;
+  }
+
+  // ======================================================================
+  //  Convert  DRAM CycleTiming values and store into DCT structure
+  // ======================================================================
+  //
+  TCK_ps = 1000500 / DCTPtr->Timings.Speed;
+
+  StatDimmTmgPtr = &DCTPtr->Timings.DIMMTrcd;
+  StatTmgPtr = &DCTPtr->Timings.Trcd;
+  for (j = 0; j < GET_SIZE_OF (SpdIndexes); j++) {
+    Value32 = MiniMaxTmg[j];
+
+    MiniMaxTmg[j] = (MiniMaxTmg[j] + TCK_ps - 1) / TCK_ps;
+
+    StatDimmTmgPtr[j] = (UINT16) (Value32 / (1000 / 40));
+    StatTmgPtr[j] = (UINT8) MiniMaxTmg[j];
+  }
+  DCTPtr->Timings.Trfc0 = MiniMaxTrfc[0];
+  DCTPtr->Timings.Trfc1 = MiniMaxTrfc[1];
+  DCTPtr->Timings.Trfc2 = MiniMaxTrfc[2];
+  DCTPtr->Timings.Trfc3 = MiniMaxTrfc[3];
+
+  DCTPtr->Timings.CasL = MemTSPDGetTCL3 (TechPtr);
+
+  //======================================================================
+  // Program DRAM Timing values
+  //======================================================================
+  //
+  NBPtr->ProgramCycTimings (NBPtr);
+
+  MemFInitTableDrive (NBPtr, MTAfterAutoCycTiming);
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the bank addressing, program Mask values and build a chip-select population map.
+ *   This routine programs PCI 0:24N:2x80 config register.
+ *   This routine programs PCI 0:24N:2x60,64,68,6C config registers (CS Mask 0-3)
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE  - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDSetBanks3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 *SpdBufferPtr;
+  UINT8 i;
+  UINT8 ChipSel;
+  UINT8 DimmID;
+  UINT8 Value8;
+  UINT8 Rows;
+  UINT8 Cols;
+  UINT8 Ranks;
+  UINT8 Banks;
+  UINT32 BankAddrReg;
+  UINT32 CsMask;
+  UINT16 CSSpdCSE;
+  UINT16 CSExclude;
+  UINT16 DimmQRDR;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  BankAddrReg = 0;
+  CSSpdCSE = 0;
+  CSExclude = 0;
+
+  for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+    DimmID = ChipSel >> 1;
+
+    DimmQRDR = (DCTPtr->Timings.DimmQrPresent) | (DCTPtr->Timings.DimmDrPresent);
+    if ((DCTPtr->Timings.DimmSpdCse & ((UINT16) 1 << DimmID)) != 0) {
+      CSSpdCSE |= (UINT16) ((DimmQRDR & (UINT16) 1 << DimmID) ? 3 : 1) << ChipSel;
+    }
+    if ((DCTPtr->Timings.DimmExclude & ((UINT16) 1 << DimmID)) != 0) {
+      CSExclude |= (UINT16) ((DimmQRDR & (UINT16) 1 << DimmID) ? 3: 1) << ChipSel;
+    }
+
+    if ((DCTPtr->Timings.DctDimmValid & ((UINT16)1 << DimmID)) != 0) {
+      MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, DimmID);
+
+      //  Get the basic data
+      Rows = (SpdBufferPtr[SPD_ROW_SZ] >> 3) & 0x7;
+      Cols = SpdBufferPtr[SPD_COL_SZ] & 0x7;
+      Banks = (SpdBufferPtr[SPD_L_BANKS] >> 4) & 0x7;
+      Ranks = ((SpdBufferPtr[SPD_RANKS] >> 3) & 0x07) + 1;
+      if (Ranks == 5) {
+        Ranks = 8;
+      }
+      //
+      // Configure the bank encoding
+      // Use a 6-bit key into a lookup table.
+      // Key (index) = RRRBCC, where CC is the number of Columns minus 9,
+      // RRR is the number of Rows minus 12, and B is the number of banks
+      // minus 3.
+      //
+      Value8 = Cols;
+      Value8 |= (Banks == 1) ? 4 : 0;
+      Value8 |= Rows << 3;
+
+      if (MemTCheckBankAddr3 (Value8, &i)) {
+        //
+        // Mask value=(2pow(rows+cols+banks+3)-1)>>8,
+        // or 2pow(rows+cols+banks-5)-1
+        //
+        Value8 = (Rows + 12) + (Cols + 9) + (Banks + 3) + 3 - 8;
+        if (MCTPtr->Status[Sb128bitmode]) {
+          Value8++;
+        }
+
+        DCTPtr->Timings.CsPresent |= (UINT16)1 << ChipSel;
+
+        if (Ranks >= 2) {
+          DCTPtr->Timings.CsPresent |= (UINT16)1 << (ChipSel + 1);
+        }
+        //
+        // Determine LRDIMM Rank Multiplication
+        //
+        if (TechPtr->TechnologySpecificHook[LrdimmRankMultiplication] (TechPtr, &DimmID)) {
+          //
+          // Increase the CS Size by the rank multiplication factor
+          //
+          Value8 += ((NBPtr->ChannelPtr->LrDimmRankMult[DimmID]) >> 1);
+          CsMask = ((UINT32)1 << Value8) - 1;
+          CsMask &= NBPtr->CsRegMsk;
+          CsMask |= (NBPtr->GetBitField (NBPtr, BFRankDef0 + DimmID) & 0x03);
+        } else {
+          CsMask = ((UINT32)1 << Value8) - 1;
+          CsMask &= NBPtr->CsRegMsk;
+        }
+        //
+        //  Update the DRAM CS Mask and BankAddrReg for this chipselect
+        //
+        if ((DCTPtr->Timings.CsPresent & (UINT16)3 << ChipSel) != 0) {
+          NBPtr->SetBitField (NBPtr, BFCSMask0Reg + (ChipSel >> 1), (CsMask));
+          BankAddrReg |= ((UINT32)i << (ChipSel << 1));
+        }
+      } else {
+        //
+        // Dimm is not supported, as no address mapping is found.
+        //
+        DCTPtr->Timings.CsPresent |= (UINT16)1 << ChipSel;
+        DCTPtr->Timings.CsTestFail |= (UINT16)1 << ChipSel;
+        if (Ranks >= 2) {
+          DCTPtr->Timings.CsPresent |= (UINT16)1 << (ChipSel + 1);
+          DCTPtr->Timings.CsTestFail |= (UINT16)1 << (ChipSel + 1);
+        }
+        PutEventLog (AGESA_ERROR, MEM_ERROR_NO_ADDRESS_MAPPING, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, DimmID, &NBPtr->MemPtr->StdHeader);
+        SetMemError (AGESA_ERROR, MCTPtr);
+      }
+    } //if (MemTCheckBankAddr3 (Value8, &i)
+  }
+  // For ranks that need to be excluded, the loading of this rank should be considered
+  // in timing, so need to set CsPresent before setting CsTestFail
+  if ((CSSpdCSE != 0) || (CSExclude != 0)) {
+    if (!NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, (CSSpdCSE | CSExclude), &NBPtr->MemPtr->StdHeader)) {
+      ASSERT (FALSE);
+    }
+  }
+
+  //  If there are no chip selects, we have an error situation.
+  if (DCTPtr->Timings.CsPresent == 0) {
+    PutEventLog (AGESA_ERROR, MEM_ERROR_NO_CHIPSELECT, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, MCTPtr);
+  }
+
+  NBPtr->SetBitField (NBPtr, BFDramBankAddrReg, BankAddrReg);
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function returns the low bit that will be swapped to enable CS interleaving
+ *
+ *     @param[in]   BankEnc - AddrMap Bank encoding from F2x80
+ *     @param[in]   *LowBit - pointer to low bit
+ *     @param[in]   *HiBit  - pointer hight bit
+ *
+ */
+
+VOID
+MemTGetCSIntLvAddr3 (
+  IN       UINT8 BankEnc,
+     OUT   UINT8 *LowBit,
+     OUT   UINT8 *HiBit
+  )
+{
+  CONST UINT8 ArrCodesLo[] = {0, 8, 8, 0, 0, 8, 9, 8, 9, 9, 8, 9};
+  CONST UINT8 ArrCodesHi[] = {0, 20, 21, 0, 0, 22, 22, 23, 23, 24, 24, 25};
+  ASSERT (BankEnc < GET_SIZE_OF (ArrCodesLo));
+  ASSERT (BankEnc < GET_SIZE_OF (ArrCodesHi));
+  //  return ArrCodes[BankEnc];
+  *LowBit = ArrCodesLo[BankEnc];
+  *HiBit = ArrCodesHi[BankEnc];
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function determines if the checksum is correct
+ *
+ *     @param[in]   *SPDPtr - Pointer to SPD data
+ *
+ *     @return    TRUE  - CRC check passes
+ *     @return    FALSE - CRC check fails
+ */
+
+BOOLEAN
+STATIC
+MemTCRCCheck3 (
+  IN OUT   UINT8 *SPDPtr
+  )
+{
+  UINT16 Crc;
+  INT16 i;
+  INT16 j;
+  INT16 Count;
+
+  if (SPDPtr[SPD_TYPE] == JED_DDR3SDRAM) {
+    Count = (SPDPtr[SPD_BYTE_USED] & 0x80) ? 117 : 126;
+    Crc = 0;
+    for (j = 0; j < Count; j++) {
+      Crc = Crc ^ ((UINT16)SPDPtr[j] << 8);
+      for (i = 0; i < 8; i++) {
+        if (Crc & 0x8000) {
+          Crc = (Crc << 1) ^ 0x1021;
+        } else {
+          Crc = (Crc << 1);
+        }
+      }
+    }
+    if (*(UINT16 *) (SPDPtr + 126) == Crc) {
+      return TRUE;
+    }
+  }
+
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function returns the CAS latency of the current frequency (DCTPtr->Timings.Speed).
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  CAS Latency
+ */
+
+UINT8
+STATIC
+MemTSPDGetTCL3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8  *SpdBufferPtr;
+  UINT8 CLdesired;
+  UINT8 CLactual;
+  UINT8 Dimm;
+  UINT8 Channel;
+  UINT16 CASLat;
+  UINT16 Mask16;
+  INT32 MTB_ps;
+  INT32 FTB_ps;
+  INT32 TAAmin_ps;
+  INT32 TCKproposed_ps;
+  INT32 Value32;
+  BOOLEAN CltFail;
+  MEM_NB_BLOCK *NBPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  DCTPtr = NBPtr->DCTPtr;
+
+  CASLat = 0xFFFF;
+  TAAmin_ps = 0;
+  CltFail = FALSE;
+
+  for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+    NBPtr->SwitchChannel (NBPtr, Channel);
+    ChannelPtr = NBPtr->ChannelPtr;
+    for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+      if ((ChannelPtr->ChDimmValid & ((UINT8)1 << Dimm)) != 0) {
+        MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm);
+
+        // Step 1: Determine the common set of supported CAS Latency
+        // values for all modules on the memory Channel using the CAS
+        // Latencies Supported in SPD bytes 14 and 15.
+        //
+        CASLat &= ((UINT16)SpdBufferPtr[SPD_CASHI] << 8) | SpdBufferPtr[SPD_CASLO];
+
+        // Step 2: Determine tAAmin(all) which is the largest tAAmin
+        // value for all modules on the memory Channel (SPD byte 16).
+        //
+        MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR];
+        FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF);
+        Value32 = (MTB_ps * SpdBufferPtr[SPD_TAA]) + (FTB_ps * (INT8) SpdBufferPtr[SPD_TAA_FTB]) ;
+        if (TAAmin_ps < Value32) {
+          TAAmin_ps = Value32;
+        }
+
+        // Step 3: Determine tCKmin(all) which is the largest tCKmin
+        // value for all modules on the memory Channel (SPD byte 12).
+        // * This step has been done in SPDGetTargetSpeed
+      }
+    }
+  }
+
+  TCKproposed_ps = 1000500 / DCTPtr->Timings.Speed;
+
+  // Step 4: For a proposed tCK value (tCKproposed) between tCKmin(all) and tCKmax,
+  // determine the desired CAS Latency. If tCKproposed is not a standard JEDEC
+  // value (2.5, 1.875, 1.5, or 1.25 ns) then tCKproposed must be adjusted to the
+  // next lower standard tCK value for calculating CLdesired.
+  // CLdesired = ceiling ( tAAmin(all) / tCKproposed )
+  // where tAAmin is defined in Byte 16. The ceiling function requires that the
+  // quotient be rounded up always.
+  //
+  CLdesired = (UINT8) ((TAAmin_ps + TCKproposed_ps - 1) / TCKproposed_ps);
+
+  // Step 5: Choose an actual CAS Latency (CLactual) that is greater than or equal
+  // to CLdesired and is supported by all modules on the memory Channel as
+  // determined in step 1. If no such value exists, choose a higher tCKproposed
+  // value and repeat steps 4 and 5 until a solution is found.
+  //
+  CLactual = 4;
+  for (Mask16 = 1; Mask16 < 0x8000; Mask16 <<= 1) {
+    if (CASLat & Mask16) {
+      if (CLdesired <= CLactual) {
+        break;
+      }
+    }
+    CLactual++;
+  }
+  if (Mask16 == 0x8000) {
+    CltFail = TRUE;
+  }
+
+  // Step 6: Once the calculation of CLactual is completed, the BIOS must also
+  // verify that this CAS Latency value does not exceed tAAmax, which is 20 ns
+  // for all DDR3 speed grades, by multiplying CLactual times tCKproposed. If
+  // not, choose a lower CL value and repeat steps 5 and 6 until a solution is found.
+  //
+  if ((TCKproposed_ps * CLactual) > 20000) {
+    CltFail = TRUE;
+  }
+
+  if (!CltFail) {
+    DCTPtr->Timings.CasL = CLactual;
+  } else {
+    //  Fail to find supported Tcl, use 6 clocks since it is required for all DDR3 speed bin.
+    DCTPtr->Timings.CasL = 6;
+  }
+
+  return DCTPtr->Timings.CasL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function returns the encoded value of bank address.
+ *
+ *     @param[in]   Encode - RRRBCC, where CC is the number of Columns minus 9,
+ *                           RRR is the number of Rows minus 12, and B is the number of banks
+ *                           minus 3.
+ *     @param[out]  *Index - index in bank address table
+ *     @return      TRUE   - encoded value is found.
+ *                  FALSE  - encoded value is not found.
+ */
+
+BOOLEAN
+STATIC
+MemTCheckBankAddr3 (
+  IN       UINT8 Encode,
+     OUT   UINT8 *Index
+  )
+{
+  UINT8 i;
+  CONST UINT8 TabBankAddr[]  = {
+    0x3F, 0x01, 0x09, 0x3F, 0x3F, 0x11,
+    0x0A, 0x19, 0x12, 0x1A, 0x21, 0x22
+  };
+
+  for (i = 0; i < GET_SIZE_OF (TabBankAddr); i++) {
+    if (Encode == TabBankAddr[i]) {
+      *Index = i;
+      return TRUE;
+    }
+  }
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function returns a pointer to the SPD Buffer of a specific dimm on
+ *    the current channel.
+ *
+ *     @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out] **SpdBuffer - Pointer to a pointer to a UINT8 Buffer
+ *     @param[in] Dimm - Dimm number
+ *
+ *
+ *     @return BOOLEAN - Value of DimmPresent
+ *                       TRUE = Dimm is present, pointer is valid
+ *                       FALSE = Dimm is not present, pointer has not been modified.
+ */
+
+BOOLEAN
+MemTGetDimmSpdBuffer3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT8 **SpdBuffer,
+  IN       UINT8 Dimm
+  )
+{
+  CH_DEF_STRUCT *ChannelPtr;
+  SPD_DEF_STRUCT *SPDPtr;
+  BOOLEAN DimmPresent;
+
+  DimmPresent = FALSE;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+  ASSERT (Dimm < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0])))
+  SPDPtr = ChannelPtr->DimmSpdPtr[Dimm];
+
+
+  if (SPDPtr != NULL) {
+    DimmPresent = SPDPtr->DimmPresent;
+    if (DimmPresent) {
+      *SpdBuffer = SPDPtr->Data;
+    }
+  }
+  return DimmPresent;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtspd3.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtspd3.h
new file mode 100644
index 0000000000..e7a64dff05
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mtspd3.h
@@ -0,0 +1,177 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtspd3.h
+ *
+ * Technology SPD support for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 49133 $ @e \$Date: 2011-03-17 02:54:42 -0600 (Thu, 17 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTSPD3_H_
+#define _MTSPD3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*===============================================================================
+ *   Jedec DDR III
+ *===============================================================================
+ */
+#define SPD_BYTE_USED     0
+#define SPD_TYPE         2              /* SPD byte read location */
+#define JED_DDR_SDRAM     7              /* Jedec defined bit field */
+#define JED_DDR2_SDRAM    8              /* Jedec defined bit field */
+#define JED_DDR3SDRAM    0xB            /* Jedec defined bit field */
+
+#define SPD_DIMM_TYPE    3
+#define SPD_ATTRIB      21
+#define JED_DIF_CK_MSK    0x20            /* Differential Clock Input */
+#define JED_RDIMM       1
+#define JED_MINIRDIMM   5
+#define JED_UDIMM       2
+#define JED_SODIMM       3
+#define JED_LRDIMM      0xB
+#define JED_UNDEFINED   0                /* Undefined value */
+
+#define SPD_L_BANKS      4               /* [7:4] number of [logical] banks on each device */
+#define SPD_DENSITY     4               /* bit 3:0 */
+#define SPD_ROW_SZ       5               /* bit 5:3 */
+#define SPD_COL_SZ       5               /* bit 2:0 */
+#define SPD_RANKS       7               /* bit 5:3 */
+#define SPD_DEV_WIDTH    7               /* bit 2:0 */
+#define SPD_ECCBITS     8               /* bit 4:3 */
+#define JED_ECC         8
+#define SPD_RAWCARD     62              /* bit 2:0 */
+#define SPD_ADDRMAP     63              /* bit 0 */
+
+#define SPD_CTLWRD03     70              /* bit 7:4 */
+#define SPD_CTLWRD04     71              /* bit 3:0 */
+#define SPD_CTLWRD05     71              /* bit 7:4 */
+
+#define SPD_FTB          9
+
+#define SPD_DIVIDENT    10
+#define SPD_DIVISOR     11
+
+#define SPD_TCK         12
+#define SPD_CASLO       14
+#define SPD_CASHI       15
+#define SPD_TAA         16
+
+#define SPD_TRP         20
+#define SPD_TRRD        19
+#define SPD_TRCD        18
+#define SPD_TRAS        22
+#define SPD_TWR         17
+#define SPD_TWTR        26
+#define SPD_TRTP        27
+#define SPD_TRC         23
+#define SPD_UPPER_TRC   21              /* bit 7:4 */
+#define SPD_UPPER_TRAS  21              /* bit 3:0 */
+#define SPD_TFAW        29
+#define SPD_UPPER_TFAW  28              /* bit 3:0 */
+
+#define SPD_TCK_FTB     34
+#define SPD_TAA_FTB     35
+#define SPD_TRCD_FTB    36
+#define SPD_TRP_FTB     37
+#define SPD_TRC_FTB     38
+
+/*-----------------------------
+ * Jedec DDR II related equates
+ *-----------------------------
+ */
+
+#define CL_DEF          4              /* Default value for failsafe operation. 4=CL 6.0 T */
+#define T_DEF           4              /* Default value for failsafe operation. 4=2.5ns (cycle time) */
+
+#define BIAS_TRTP_T      4
+#define BIAS_TRCD_T      5
+#define BIAS_TRAS_T      15
+#define BIAS_TRC_T       11
+#define BIAS_TRRD_T      4
+#define BIAS_TWR_T       4
+#define BIAS_TRP_T       5
+#define BIAS_TWTR_T      4
+#define BIAS_TFAW_T      14
+
+#define MIN_TRTP_T       4
+#define MAX_TRTP_T       7
+#define MIN_TRCD_T       5
+#define MAX_TRCD_T       12
+#define MIN_TRAS_T       15
+#define MAX_TRAS_T       30
+#define MIN_TRC_T        11
+#define MAX_TRC_T        42
+#define MIN_TRRD_T       4
+#define MAX_TRRD_T       7
+#define MIN_TWR_T        5
+#define MAX_TWR_T        12
+#define MIN_TRP_T        5
+#define MAX_TRP_T        12
+#define MIN_TWTR_T       4
+#define MAX_TWTR_T       7
+#define MIN_TFAW_T       16
+#define MAX_TFAW_T       32
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#endif  /* _MTSPD3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mttecc3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mttecc3.c
new file mode 100644
index 0000000000..2bc3f3773b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mttecc3.c
@@ -0,0 +1,164 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttecc3.c
+ *
+ * Technology ECC byte support for registered DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTTECC3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the DQS ECC timings for registered DDR3
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTSetDQSEccTmgsRDdr3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 Dimm;
+  UINT8 i;
+  UINT8 *WrDqsDly;
+  UINT16 *RcvEnDly;
+  UINT8 *RdDqsDly;
+  UINT8 *WrDatDly;
+  UINT8 EccByte;
+  INT16 TempValue;
+
+  MEM_NB_BLOCK *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  EccByte = TechPtr->MaxByteLanes ();
+  NBPtr = TechPtr->NBPtr;
+
+  if (NBPtr->MCTPtr->NodeMemSize) {
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        ChannelPtr = NBPtr->ChannelPtr;
+        for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+          if (NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16)3 << (Dimm * 2))) {
+            i = Dimm * TechPtr->DlyTableWidth ();
+            WrDqsDly = &ChannelPtr->WrDqsDlys[i];
+            RcvEnDly = &ChannelPtr->RcvEnDlys[i];
+            RdDqsDly = &ChannelPtr->RdDqsDlys[i];
+            WrDatDly = &ChannelPtr->WrDatDlys[i];
+            // Receiver DQS Enable:
+            // Receiver DQS enable for ECC bytelane = Receiver DQS enable for bytelane 3 -
+            //                                        [write DQS for bytelane 3 - write DQS for ECC]
+
+            TempValue = (INT16) RcvEnDly[3] - (INT16) (WrDqsDly[3] - WrDqsDly[EccByte]);
+            if (TempValue < 0) {
+              TempValue = 0;
+            }
+            RcvEnDly[EccByte] = (UINT16) TempValue;
+
+            // Read DQS:
+            // Read DQS for ECC bytelane = read DQS of byte lane 3
+            //
+            RdDqsDly[EccByte] = RdDqsDly[3];
+
+            // Write Data:
+            // Write Data for ECC bytelane = Write DQS for ECC +
+            //                               [write data for bytelane 3 - Write DQS for bytelane 3]
+            TempValue = (INT16) (WrDqsDly[EccByte] + (INT8) (WrDatDly[3] - WrDqsDly[3]));
+            if (TempValue < 0) {
+              TempValue = 0;
+            }
+            WrDatDly[EccByte] = (UINT8) TempValue;
+
+            NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Dimm, EccByte), RcvEnDly[EccByte]);
+            NBPtr->SetTrainDly (NBPtr, AccessRdDqsDly, DIMM_BYTE_ACCESS (Dimm, EccByte), RdDqsDly[EccByte]);
+            NBPtr->SetTrainDly (NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (Dimm, EccByte), WrDatDly[EccByte]);
+          }
+        }
+      }
+    }
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mttwl3.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mttwl3.c
new file mode 100644
index 0000000000..f98956f04e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/DDR3/mttwl3.c
@@ -0,0 +1,719 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttwl3.c
+ *
+ * Technology Phy assisted write levelization for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 57883 $ @e \$Date: 2011-08-15 10:41:06 -0600 (Mon, 15 Aug 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mp.h"
+#include "mtsdi3.h"
+#include "mtlrdimm3.h"
+#include "merrhdl.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTTWL3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[];
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemTWriteLevelizationHw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Pass
+  );
+
+VOID
+STATIC
+MemTWLPerDimmHw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Pass
+  );
+
+VOID
+STATIC
+MemTPrepareDIMMs3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 TargetDIMM,
+  IN       BOOLEAN Wl
+  );
+
+VOID
+STATIC
+MemTProcConfig3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Pass
+  );
+
+VOID
+STATIC
+MemTBeginWLTrain3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes first pass of Phy assisted write levelization
+ *      for a specific node (DDR800).
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTWriteLevelizationHw3Pass1 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  return MemTWriteLevelizationHw3 (TechPtr, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes second pass of Phy assisted write levelization
+ *      for a specific node (DDR1066 and above).
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTWriteLevelizationHw3Pass2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  // If current speed is higher than start-up speed, do second pass of WL
+  if (TechPtr->NBPtr->DCTPtr->Timings.Speed > TechPtr->NBPtr->StartupSpeed) {
+    return MemTWriteLevelizationHw3 (TechPtr, 2);
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function prepares for Phy assisted training.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTPreparePhyAssistedTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  //  Disable auto refresh by configuring F2x[1, 0]8C[DisAutoRefresh] = 1.
+  TechPtr->NBPtr->BrdcstSet (TechPtr->NBPtr, BFDisAutoRefresh, 1);
+  //  Disable ZQ calibration short command by configuring F2x[1, 0]94[ZqcsInterval] = 00b.
+  TechPtr->NBPtr->BrdcstSet (TechPtr->NBPtr, BFZqcsInterval, 0);
+  //  Attempt to get the seeds value from PSC tables for WL and RxEn pass1 training if applicable.
+  if (!TechPtr->NBPtr->PsPtr->MemPGetPass1Seeds (TechPtr->NBPtr)) {
+    ASSERT (FALSE);
+  }
+
+  return (BOOLEAN) (TechPtr->NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function revert to normal settings when exiting from Phy assisted training.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTExitPhyAssistedTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK *NBPtr;
+  NBPtr = TechPtr->NBPtr;
+
+  //  13.Program F2x[1, 0]8C[DisAutoRefresh] = 0.
+  NBPtr->BrdcstSet (NBPtr, BFDisAutoRefresh, 0);
+  //  14.Program F2x[1, 0]94[ZqcsInterval] to the proper interval for the current memory configuration.
+  NBPtr->BrdcstSet (NBPtr, BFZqcsInterval, 2);
+  NBPtr->FamilySpecificHook[ExitPhyAssistedTraining] (NBPtr, NBPtr);
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executed hardware based write levelization for a specific die
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in] Pass - Pass number (1 (400Mhz) or 2 (>400Mhz))
+ *
+ *     @pre   Auto refresh and ZQCL must be disabled
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+STATIC
+MemTWriteLevelizationHw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Pass
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  DCT_STRUCT *DCTPtr;
+  UINT8 Dct;
+  UINT8 Dimm;
+
+  NBPtr = TechPtr->NBPtr;
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart write leveling\n");
+  AGESA_TESTPOINT (TpProcMemWriteLevelizationTraining, &(NBPtr->MemPtr->StdHeader));
+  // Begin DQS Write timing training
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    DCTPtr = NBPtr->DCTPtr;
+
+    TechPtr->WLCriticalDelay = 0x00;
+
+    //training for each Dimm
+    for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+      if ((DCTPtr->Timings.CsEnabled & ((UINT16)3 << (Dimm << 1))) != 0) {
+        if (!(NBPtr->MCTPtr->Status[SbLrdimms]) || ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << Dimm)) != 0)) {
+          IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", Dimm << 1);
+          MemTWLPerDimmHw3 (TechPtr, Dimm, Pass);
+        }
+      }
+    }
+
+    NBPtr->FamilySpecificHook[CalcWrDqDqsEarly] (NBPtr, NULL);
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "End write leveling\n\n");
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function initializes per DIMM write levelization
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in] Dimm - DIMM to be trained
+ *     @param[in] Pass - Pass number (1 (400Mhz) or 2 (>400Mhz))
+ *
+ */
+
+VOID
+STATIC
+MemTWLPerDimmHw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Pass
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  ASSERT (Dimm < MAX_DIMMS_PER_CHANNEL);
+
+  // 1. A. Specify the target Dimm that is to be trained by programming
+  //     F2x[1, 0]9C_x08[TrDimmSel].
+  NBPtr->SetBitField (NBPtr, BFTrDimmSel, Dimm);
+
+  TechPtr->TargetDIMM = Dimm;
+  NBPtr->FamilySpecificHook[InitPerNibbleTrn] (NBPtr, NULL);
+  for (TechPtr->TrnNibble = NIBBLE_0; TechPtr->TrnNibble <= (NBPtr->FamilySpecificHook[TrainWlPerNibble] (NBPtr, &Dimm)? NIBBLE_0 : NIBBLE_1); TechPtr->TrnNibble++) {
+    // 2. Prepare the DIMMs for write levelization using DDR3-defined
+    // MR commands.
+    MemTPrepareDIMMs3 (TechPtr, Dimm, TRUE);
+
+    // 3. After the DIMMs are configured, BIOS waits 40 MEMCLKs to
+    //     satisfy DDR3-defined internal DRAM timing.
+    NBPtr->WaitXMemClks (NBPtr, 40);
+
+    // 4. Configure the processor's DDR phy for write levelization training:
+    MemTProcConfig3 (TechPtr, Dimm, Pass);
+
+    // 5. Begin write levelization training
+    MemTBeginWLTrain3 (TechPtr, Dimm);
+  }
+  // 7. Program the target Dimm back to normal operation
+  MemTPrepareDIMMs3 (TechPtr, Dimm, FALSE);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function prepares the DIMMS for Write Levelization
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in] TargetDIMM - DIMM to be trained
+ *     @param[in] Wl - Indicates if WL mode should be enabled
+ *
+ */
+
+VOID
+STATIC
+MemTPrepareDIMMs3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 TargetDIMM,
+  IN       BOOLEAN Wl
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  UINT8 ChipSel;
+
+  NBPtr = TechPtr->NBPtr;
+
+  AGESA_TESTPOINT (TpProcMemWlPrepDimms, &(NBPtr->MemPtr->StdHeader));
+  ASSERT (TargetDIMM < MAX_DIMMS_PER_CHANNEL);
+  TechPtr->TargetDIMM = TargetDIMM;
+  if (!(TechPtr->TechnologySpecificHook[WlTrainingPrepareLrdimm] (TechPtr, &Wl))) {
+    for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+      if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+        NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+        // Set MR1 to F2x7C[MrsAddress], F2x7C[MrsBank]=1
+        MemTEMRS13 (TechPtr, Wl, TargetDIMM);
+        NBPtr->SendMrsCmd (NBPtr);
+        // Set MR2 to F2x7C[MrsAddress], F2x7C[MrsBank]=1
+        MemTEMRS23 (TechPtr);
+        // Send command
+        NBPtr->SendMrsCmd (NBPtr);
+      }
+    }
+    if (Wl) {
+      // Program WrLvOdt for the Target DIMM (or CS)
+      NBPtr->SetBitField (NBPtr, BFWrLvOdt, NBPtr->ChannelPtr->PhyWLODT[TargetDIMM]);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function programs seed values for Write Levelization
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in] Dimm - DIMM to be trained
+ *     @param[in] Pass - Pass for WL training (1 - 400Mhz or 2 - >400Mhz)
+ *
+ */
+
+VOID
+STATIC
+MemTProcConfig3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Pass
+  )
+{
+  DIE_STRUCT *MCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  MEM_NB_BLOCK *NBPtr;
+  UINT16 WrDqsDly;
+  // Memclk Delay incurred by register.
+  UINT8 MemClkRegDly;
+  UINT8 ByteLane;
+  UINT8 DefaultSeed;
+  UINT8 CurrentSeed;
+  UINT8 *Seed;
+  UINT8 RCW2;
+  UINT16 Speed;
+  INT16 WrDqsBias;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  AGESA_TESTPOINT (TpProcMemWlConfigDimms, &(NBPtr->MemPtr->StdHeader));
+  RCW2 = ChannelPtr->CtrlWrd02[Dimm];
+  Speed = TechPtr->NBPtr->DCTPtr->Timings.Speed;
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSeeds: ");
+  //  Program an initialization Value to registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 to set
+  //  the gross and fine delay for all the byte lane fields. If the target frequency is different than 400MHz,
+  //  BIOS must execute two training passes for each Dimm. For pass 1 at a 400MHz MEMCLK frequency,
+  //  use an initial total delay value.
+  if (Pass == 1) {
+    //
+    // Get the default value of seed
+    //
+    if (MCTPtr->Status[SbRegistered]) {
+      //
+      // RDIMM
+      //
+      if (Speed == DDR667_FREQUENCY) {
+        DefaultSeed = ((RCW2 & BIT0) == 0) ? 0x3B : 0x4B;
+      } else {
+        DefaultSeed = ((RCW2 & BIT0) == 0) ? 0x41 : 0x51;
+      }
+    } else if (ChannelPtr->SODimmPresent != 0) {
+      //
+      // SODIMMM
+      //
+      DefaultSeed = 0x12;
+    } else if (MCTPtr->Status[SbLrdimms]) {
+      //
+      // LRDIMM
+      //
+      DefaultSeed = 0xF7;
+    } else {
+      //
+      // UDIMMM
+      //
+      DefaultSeed = 0x1A;
+    }
+
+    NBPtr->FamilySpecificHook[OverrideWLSeed] (NBPtr, &DefaultSeed);
+    ASSERT (Speed >= DDR667_FREQUENCY);
+
+    // Get platform override seed
+    Seed = (UINT8 *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_WL_SEED, MCTPtr->SocketId, ChannelPtr->ChannelID, Dimm,
+                                          &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+    for (ByteLane = 0; ByteLane < TechPtr->DlyTableWidth (); ByteLane++) {
+      // This includes ECC as byte 8
+      CurrentSeed = ((Seed != NULL) ? Seed[ByteLane] : DefaultSeed);
+      ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane] = CurrentSeed;
+
+      if (NBPtr->IsSupported[WLSeedAdjust]) {
+        if ((CurrentSeed & 0x20) != 0) {
+          // If (SeedGross is odd) then SeedPreGross = 1
+          CurrentSeed = (CurrentSeed & 0x1F) | 0x20;
+        } else {
+          // If (SeedGross is even) then SeedPreGross = 2
+          CurrentSeed = (CurrentSeed & 0x1F) | 0x40;
+        }
+      }
+
+      NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), CurrentSeed);
+      IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", CurrentSeed);
+    }
+  } else {
+    //10.Multiply the previously saved delay values in Pass 1, step #5 by (target frequency)/400 to find
+    //the gross and fine delay initialization values at the target frequency. Use these values as the initial
+    //seed values when executing Pass 2, step #4.
+    for (ByteLane = 0; ByteLane < TechPtr->DlyTableWidth (); ByteLane++) {
+      // This includes ECC as byte 8
+      WrDqsDly = ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane];
+      TechPtr->Bytelane = ByteLane;
+      NBPtr->FamilySpecificHook[TrainWlPerNibbleSeed] (NBPtr, &WrDqsDly);
+
+      if (MCTPtr->Status[SbRegistered]) {
+        //
+        // For Registered Dimms
+        //
+        MemClkRegDly = ((RCW2 & BIT0) == 0) ? 0x20 : 0x30;
+      } else {
+        //
+        // Unbuffered Dimms and LRDIMMs
+        //
+        MemClkRegDly = 0;
+      }
+      //
+      // Recover any adjustmen to delay for WrDqDqsEarly
+      //
+      WrDqsBias = 0;
+      NBPtr->FamilySpecificHook[AdjustWrDqsBeforeSeedScaling] (NBPtr, &WrDqsBias);
+
+      // Scale WrDqsDly to the next speed
+      WrDqsDly = (UINT16) (MemClkRegDly + ((((INT32) WrDqsDly - MemClkRegDly - WrDqsBias) * Speed) / TechPtr->PrevSpeed));
+
+      ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane] = (UINT8) WrDqsDly;
+
+      if (NBPtr->IsSupported[WLSeedAdjust]) {
+        if ((WrDqsDly & 0x20) != 0) {
+          // If (SeedGross is odd) then SeedPreGross = 1
+          WrDqsDly = (WrDqsDly & 0x1F) | 0x20;
+        } else {
+          // If (SeedGross is even) then SeedPreGross = 2
+          WrDqsDly = (WrDqsDly & 0x1F) | 0x40;
+        }
+      }
+      NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqsDly);
+      IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", WrDqsDly);
+    }
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function begins WL training for a specific DIMM
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in] Dimm - DIMM to be trained
+ *
+ */
+
+VOID
+STATIC
+MemTBeginWLTrain3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  DIE_STRUCT *MCTPtr;
+  MEM_NB_BLOCK *NBPtr;
+  UINT8 ByteLane;
+  UINT8 Seed;
+  UINT8 Delay;
+  INT16 Delay16;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  AGESA_TESTPOINT (TpProcMemWlTrainTargetDimm, &(MemPtr->StdHeader));
+  // Assert ODT pins for write leveling
+  NBPtr->SetBitField (NBPtr, BFWrLvOdtEn, 1);
+
+  // Wait 10 MEMCLKs to allow for ODT signal settling.
+  NBPtr->WaitXMemClks (NBPtr, 10);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrtLvTrEn = 1\n");
+  // Program F2x[1, 0]9C_x08[WrtLlTrEn]=1.
+  NBPtr->SetBitField (NBPtr, BFWrtLvTrEn, 1);
+
+  //  Wait 200 MEMCLKs.
+  NBPtr->WaitXMemClks (NBPtr, 200);
+
+  //  Program F2x[1, 0]9C_x08[WrtLlTrEn]=0.
+  NBPtr->SetBitField (NBPtr, BFWrtLvTrEn, 0);
+
+  //  Read from registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 to get the gross and fine Delay settings
+  //  for the target Dimm and save these values.
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t  PRE: ");
+  for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+    // This includes ECC as byte 8
+    Seed = NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane];
+    Delay = (UINT8)NBPtr->GetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane));
+    IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Delay);
+
+    TechPtr->Bytelane = ByteLane;
+    TechPtr->TargetDIMM = Dimm;
+    NBPtr->FamilySpecificHook[TrainWlPerNibbleAdjustWLDly] (NBPtr, &Delay);
+
+    if (NBPtr->IsSupported[WLSeedAdjust]) {
+      // Recover WrDqsGrossDly:
+      // WrDqsGrossDly = SeedGross + PhRecGrossDlyByte - SeedPreGross
+      if ((Seed & 0x20) != 0) {
+        // If (SeedGross is odd) then SeedPreGross = 1
+        if ((NBPtr->IsSupported[WLNegativeDelay]) && ((Seed & 0x80) != 0)) {
+          // If the seed was negative, save the most negative delay in WLCriticalDelay
+          TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, (INT16)Delay - 0x40);
+          Delay -= 0x40;
+        } else {
+          Delay += (Seed & 0xE0) - 0x20;
+        }
+      } else {
+        // If (SeedGross is even) then SeedPreGross = 2
+        if (((Seed & 0xE0) == 0) && (Delay < 0x40)) {
+          // If SeedGross is 0 and PhRecGrossDlyByte is less than SeedPreGross,
+          // we have a negative result and need to program the delay to 0
+          if (NBPtr->IsSupported[WLNegativeDelay]) {
+            //
+            // Save the lowest negative delay value across all Dimms and Bytelanes
+            //
+            TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, (INT16)Delay - 0x40);
+            Delay -= 0x40;
+          } else {
+            Delay = 0;
+          }
+        } else {
+          if (NBPtr->GetBitField (NBPtr, BFWrDqDqsEarly) != 0) {
+            Delay = Delay + (Seed & 0xE0);
+            Delay16 = Delay - 0x40;
+            Delay = (UINT8)Delay16;
+            TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, Delay16);
+          } else {
+            Delay += (Seed & 0xE0) - 0x40;
+          }
+        }
+      }
+    } else if (((Seed >> 5) == 0) && ((Delay >> 5) == 3)) {
+      IDS_OPTION_HOOK (IDS_CHECK_NEGATIVE_WL, &Delay, &(TechPtr->NBPtr->MemPtr->StdHeader));
+      // If seed has gross delay of 0 and PRE has gross delay of 3,
+      // then round the total delay of TxDqs to 0.
+      Delay = 0;
+    }
+
+    if ((!NBPtr->IsSupported[WLNegativeDelay]) && ((Delay > (Seed + 0x20)) || (Seed > (Delay + 0x20)))) {
+      //
+      // If PRE comes back with more than Seed +/- 0x20, then this is an
+      //   unexpected condition.  Log the condition.
+      //
+      PutEventLog (AGESA_ERROR, MEM_ERROR_WL_PRE_OUT_OF_RANGE, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, ((Seed << 8) + Delay), &NBPtr->MemPtr->StdHeader);
+    }
+    NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), Delay);
+    NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane] = Delay;
+  }
+
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tWrDqs: ");
+    for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane]);
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+  );
+
+  // Disable write leveling ODT pins
+  NBPtr->SetBitField (NBPtr, BFWrLvOdtEn, 0);
+
+  // Wait 10 MEMCLKs to allow for ODT signal settling.
+  NBPtr->WaitXMemClks (NBPtr, 10);
+
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function programs register after Phy assisted training is finish.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTExitPhyAssistedTrainingClient3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  UINT8  Dct;
+  UINT8  ChipSel;
+  NBPtr = TechPtr->NBPtr;
+
+  NBPtr->FamilySpecificHook[ReEnablePhyComp] (NBPtr, NBPtr);
+  NBPtr->BrdcstSet (NBPtr, BFRxPtrInitReq, 1);
+  NBPtr->PollBitField (NBPtr, BFRxPtrInitReq, 0, PCI_ACCESS_TIMEOUT, TRUE);
+  NBPtr->BrdcstSet (NBPtr, BFDisDllShutdownSR, 1);
+  NBPtr->BrdcstSet (NBPtr, BFEnterSelfRef, 1);
+  NBPtr->PollBitField (NBPtr, BFEnterSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClkAlign = 2\n");
+  NBPtr->BrdcstSet (NBPtr, BFDbeGskMemClkAlignMode, 2);
+  NBPtr->BrdcstSet (NBPtr, BFExitSelfRef, 1);
+  NBPtr->PollBitField (NBPtr, BFExitSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+  if (NBPtr->IsSupported[SetDllShutDown]) {
+    NBPtr->BrdcstSet (NBPtr, BFDisDllShutdownSR, 0);
+  }
+
+  // Calculate Max Latency for both channels to prepare for position training
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &ChipSel)) {
+      NBPtr->SetMaxLatency (NBPtr, TechPtr->MaxDlyForMaxRdLat);
+    }
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mt.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mt.c
new file mode 100644
index 0000000000..de4a32f54a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mt.c
@@ -0,0 +1,263 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt.c
+ *
+ * Common Technology file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_MT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemTDefaultTechnologyHook (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  );
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function is the default return for non-training technology features
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ */
+BOOLEAN
+MemTFeatDef (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets the TestFail bit for all CS that fail training.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ */
+VOID
+MemTMarkTrainFail (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK *NBPtr;
+  UINT8 Dct;
+  UINT8 ChipSel;
+
+  NBPtr = TechPtr->NBPtr;
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct ++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    NBPtr->DCTPtr->Timings.CsEnabled &= ~NBPtr->DCTPtr->Timings.CsTrainFail;
+    for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel ++) {
+      if ((NBPtr->DCTPtr->Timings.CsTrainFail & ((UINT16)1 << ChipSel)) != 0) {
+        NBPtr->SetBitField (NBPtr, (BFCSBaseAddr0Reg + ChipSel), (UINT32)1 << BFTestFail);
+      }
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets the initial controller environment before training.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTBeginTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  S_UINT64 SMsr;
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  LibAmdReadCpuReg (CR4_REG, &TechPtr->CR4reg);
+  LibAmdWriteCpuReg (CR4_REG, TechPtr->CR4reg | ((UINT32)1 << 9)); // enable SSE2
+
+  LibAmdMsrRead (HWCR, (UINT64 *) (&SMsr), &MemPtr->StdHeader);            // HWCR
+  TechPtr->HwcrLo = SMsr.lo;
+  SMsr.lo |= 0x00020000;                  // turn on HWCR.wrap32dis
+  SMsr.lo &= 0xFFFF7FFF;                  // turn off HWCR.SSEDIS
+  LibAmdMsrWrite (HWCR, (UINT64 *) (&SMsr), &MemPtr->StdHeader);
+
+  TechPtr->DramEcc = (UINT8) NBPtr->GetBitField (NBPtr, BFDramEccEn);
+  NBPtr->SetBitField (NBPtr, BFDramEccEn, 0); // Disable ECC
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets the final controller environment after training.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTEndTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  S_UINT64 SMsr;
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  LibAmdWriteCpuReg (CR4_REG, TechPtr->CR4reg);
+
+  LibAmdMsrRead (HWCR, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.lo = TechPtr->HwcrLo;
+  LibAmdMsrWrite (HWCR, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  NBPtr->SetBitField (NBPtr, BFDramEccEn, TechPtr->DramEcc);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets all the bytelanes/nibbles to the same delay value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Dly - Delay value to set
+ *
+ */
+
+VOID
+MemTSetDQSDelayAllCSR (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dly
+  )
+{
+  UINT8 i;
+  UINT8 MaxBytelanes;
+  MaxBytelanes = (TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] && TechPtr->NBPtr->IsSupported[EccByteTraining]) ? 9 : 8;
+
+  for (i = 0; i <  MaxBytelanes; i++) {
+    TechPtr->SetDQSDelayCSR (TechPtr, i, Dly);
+  }
+  TechPtr->NBPtr->FamilySpecificHook[RegAccessFence] (TechPtr->NBPtr, NULL);
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function is used to intialize common technology functions
+ *
+ *     @param[in,out]  *TechPtr     - Pointer to the MEM_TECH_BLOCK
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemTCommonTechInit (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 i;
+  for (i = 0; i < NumberOfTechHooks; i++) {
+    TechPtr->TechnologySpecificHook[i] = MemTDefaultTechnologyHook;
+  }
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function is an empty function used to intialize TechnologySpecificHook array
+ *
+ *     @param[in,out]  *TechPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return  FALSE - always
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemTDefaultTechnologyHook (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  return FALSE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mthdi.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mthdi.c
new file mode 100644
index 0000000000..51081ed948
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mthdi.c
@@ -0,0 +1,125 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mthdi.c
+ *
+ * Common technology hardware dram init support functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_MTHDI_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates Hardware based dram initialization for both DCTs
+ *   at the same time.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTDramInitHw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 Dct;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  NBPtr->BrdcstSet (NBPtr, BFInitDram, 1);
+  // Phy fence training
+  AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+      NBPtr->PhyFenceTraining (NBPtr);
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttEdgeDetect.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttEdgeDetect.c
new file mode 100644
index 0000000000..d78a3fcfdf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttEdgeDetect.c
@@ -0,0 +1,916 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttEdgeDetect.c
+ *
+ * DQS R/W position training utilizing Data Eye Edge Detection for optimization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 57884 $ @e \$Date: 2011-08-15 10:42:12 -0600 (Mon, 15 Aug 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "AdvancedApi.h"
+#include "GeneralServices.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mport.h"
+#include "mttEdgeDetect.h"
+#include "OptionMemory.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTTEDGEDETECT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#define LAST_DELAY    (-128)
+#define INC_DELAY     1
+#define DEC_DELAY     0
+
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Sweep Table For Byte Training without insertion delay
+ *
+*/
+DQS_POS_SWEEP_TABLE SweepTableByte[] =
+{
+  //     Begin  End   Inc/Dec  Step  EndResult Edge
+  {      0x00,  0x1F, INC_DELAY,  4, 0xFFFF,   LEFT_EDGE},  /// For Left Edge, start from 0 and Increment to 0x1F by 4 until all PASS
+  { LAST_DELAY, 0x00, DEC_DELAY, -1, 0xFE00,   LEFT_EDGE},  ///  Then go back down to 0x00 by 1 until all FAIL
+  {      0x1F,  0x00, DEC_DELAY, -4, 0xFFFF,   RIGHT_EDGE}, /// For Right Edge, start from 0x1F down to 0 until all PASS.
+  { LAST_DELAY, 0x1F, INC_DELAY,  1, 0xFE00,   RIGHT_EDGE}  ///  Then go back up by 1 until all FAIL.
+};
+/**
+ * Sweep Table For Byte Training with insertion delay
+ *
+*/
+DQS_POS_SWEEP_TABLE InsSweepTableByte[] =
+{
+  //     Begin  End   Inc/Dec  Step  EndResult Edge
+  {      0x00, -0x20, DEC_DELAY, -4, 0xFE00, LEFT_EDGE},  /// For Left Edge, start from 0 and Decrement to -0x20 by -4 until all FAIL
+  { LAST_DELAY, 0x1F, INC_DELAY,  1, 0xFFFF, LEFT_EDGE},  ///  Then go back up to 0x1F by 1 until all PASS
+  {      0x1F,  0x00, DEC_DELAY, -4, 0xFFFF, RIGHT_EDGE}, /// For Right Edge, start from 0x1F down to 0 until all PASS.
+  { LAST_DELAY, 0x1F, INC_DELAY,  1, 0xFE00, RIGHT_EDGE}  ///  Then go back up by 1 until all FAIL.
+};
+
+BOOLEAN
+STATIC
+MemTTrainDQSRdWrEdgeDetect (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+STATIC
+MemTInitTestPatternAddress (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   SWEEP_INFO *SweepPtr
+  );
+
+BOOLEAN
+STATIC
+MemTContinueSweep (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   SWEEP_INFO *SweepPtr
+  );
+
+BOOLEAN
+STATIC
+MemTSetNextDelay (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   SWEEP_INFO *SweepPtr
+  );
+
+UINT8
+STATIC
+MemTScaleDelayVal (
+  IN OUT MEM_TECH_BLOCK *TechPtr,
+  IN INT8 Delay
+  );
+
+BOOLEAN
+STATIC
+MemTDataEyeSave (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   SWEEP_INFO *SweepPtr,
+  IN       UINT8 ByteLane
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR3[];
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function executes DQS position training for all a Memory channel using
+ *     the Edge Detection algorithm.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+BOOLEAN
+MemTTrainDQSEdgeDetectSw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK *NBPtr;
+  BOOLEAN Status;
+
+  Status = FALSE;
+  NBPtr = TechPtr->NBPtr;
+  TechPtr->TrainingType = TRN_DQS_POSITION;
+  //
+  // Initialize the Pattern
+  //
+  if (AGESA_SUCCESS == NBPtr->TrainingPatternInit (NBPtr)) {
+    //
+    // Setup hardware training engine (if applicable)
+    //
+    NBPtr->FamilySpecificHook[SetupHwTrainingEngine] (NBPtr, &TechPtr->TrainingType);
+    //
+    // Start Edge Detection
+    //
+    Status |= MemTTrainDQSRdWrEdgeDetect (TechPtr);
+    //
+    // Finalize the Pattern
+    //
+    Status &= (AGESA_SUCCESS == NBPtr->TrainingPatternFinalize (NBPtr));
+  }
+  return Status;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This Executes Read DQS and Write Data Position training on a chip select pair
+ *  using the Edge Detection algorithm.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - No Errors occurred
+ *     @return  FALSE - Errors occurred
+
+ */
+
+BOOLEAN
+STATIC
+MemTTrainDQSRdWrEdgeDetect (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+  UINT8 WrDqDelay;
+  UINT8 Dct;
+  UINT8 CSPerChannel;
+  UINT8 CsPerDelay;
+  UINT8 ChipSel;
+  UINT8 i;
+  BOOLEAN Status;
+  UINT8 TimesFail;
+  UINT8 TimesRetrain;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  TimesRetrain = DEFAULT_TRAINING_TIMES;
+  IDS_OPTION_HOOK (IDS_MEM_RETRAIN_TIMES, &TimesRetrain, &MemPtr->StdHeader);
+  //
+  // Set environment settings before training
+  //
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Read/Write Data Eye Edge Detection.\n");
+  MemTBeginTraining (TechPtr);
+  //
+  // Do Rd DQS /Wr Data Position training for all Dcts/Chipselects
+  //
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    //
+    // Chip Select Loop
+    //
+    CSPerChannel = NBPtr->CSPerChannel (NBPtr);
+    CsPerDelay = NBPtr->CSPerDelay (NBPtr);
+    for (ChipSel = 0; ChipSel < CSPerChannel; ChipSel = ChipSel + CsPerDelay ) {
+      //
+      // Init Bit Error Masks
+      //
+      LibAmdMemFill (&NBPtr->ChannelPtr->FailingBitMask[ (ChipSel * MAX_BYTELANES_PER_CHANNEL) ],
+        0xFF,
+        (MAX_BYTELANES_PER_CHANNEL * CsPerDelay),
+        &MemPtr->StdHeader);
+      if ( (NBPtr->MCTPtr->Status[SbLrdimms]) ? ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0) :
+           ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) != 0) ) {
+
+        TechPtr->ChipSel = ChipSel;
+        IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+        IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tIncrease WrDat, Train RdDqs:\n");
+
+        TechPtr->DqsRdWrPosSaved = 0;
+        //
+        // Use a list of Approximate Write Data delay values and train Read DQS Position for
+        // each until a valid Data eye is found.
+        //
+        Status = FALSE;
+        TimesFail = 0;
+        NBPtr->FamilySpecificHook[InitializeRxEnSeedlessTraining] (NBPtr, NBPtr);
+        ERROR_HANDLE_RETRAIN_BEGIN (TimesFail, TimesRetrain) {
+          i = 0;
+          while (NBPtr->GetApproximateWriteDatDelay (NBPtr, i, &WrDqDelay)) {
+            TechPtr->SmallDqsPosWindow = FALSE;
+            //
+            // Set Write Delay approximation
+            //
+            TechPtr->Direction = DQS_WRITE_DIR;
+            IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tWrite Delay: %02x", WrDqDelay);
+            MemTSetDQSDelayAllCSR (TechPtr, WrDqDelay);
+            //
+            // Attempt Read Training
+            //
+            TechPtr->Direction = DQS_READ_DIR;
+            Status = memTrainSequenceDDR3[NBPtr->TrainingSequenceIndex].MemTechFeatBlock->RdPosTraining (TechPtr);
+            if (Status) {
+              //
+              // If Read DQS Training was successful, Train Write Data (DQ) Position
+              //
+              TechPtr->DqsRdWrPosSaved = 0;
+              IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tTrain WrDat:\n\n");
+              TechPtr->Direction = DQS_WRITE_DIR;
+              if (NBPtr->FamilySpecificHook[BeforeWrDatTrn] (NBPtr, &ChipSel)) {
+                Status = MemTTrainDQSEdgeDetect (TechPtr);
+              }
+              break;
+            }
+            i++;
+          }
+        ERROR_HANDLE_RETRAIN_END ((Status == FALSE), TimesFail)
+        }
+
+        //
+        // If we went through the table, Fail.
+        //
+        if (Status == FALSE) {
+          // On training failure, check and record whether training fails due to small window or no window
+          if (TechPtr->SmallDqsPosWindow) {
+            NBPtr->MCTPtr->ErrStatus[EsbSmallDqs] = TRUE;
+          } else {
+            NBPtr->MCTPtr->ErrStatus[EsbNoDqsPos] = TRUE;
+          }
+
+          SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+          if (TechPtr->Direction == DQS_READ_DIR) {
+            PutEventLog (AGESA_ERROR, MEM_ERROR_NO_DQS_POS_RD_WINDOW, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+          } else {
+            PutEventLog (AGESA_ERROR, MEM_ERROR_NO_DQS_POS_WR_WINDOW, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+          }
+          NBPtr->DCTPtr->Timings.CsTrainFail |= (UINT16)1 << ChipSel;
+          // If the even chip select failed training always fail the odd, if present.
+          if ((ChipSel & 0x01) == 0) {
+            if (NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << (ChipSel + 1))) {
+              NBPtr->DCTPtr->Timings.CsTrainFail |= (UINT16)1 << (ChipSel + 1);
+            }
+          }
+          if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, NBPtr->DCTPtr->Timings.CsTrainFail, &NBPtr->MemPtr->StdHeader)) {
+            ASSERT (FALSE);
+          }
+        }
+      } else {
+      //
+      // Clear Bit Error Masks if these CS will not be trained.
+      //
+      LibAmdMemFill (&NBPtr->ChannelPtr->FailingBitMask[ (ChipSel * MAX_BYTELANES_PER_CHANNEL) ],
+        0x00,
+        (MAX_BYTELANES_PER_CHANNEL * CsPerDelay),
+        &NBPtr->MemPtr->StdHeader);
+      }
+    }
+  }
+  //
+  // Restore environment settings after training
+  //
+  MemTEndTraining (TechPtr);
+  IDS_HDT_CONSOLE (MEM_FLOW, "End Read/Write Data Eye Edge Detection\n\n");
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function executes DQS position training for both read and write, using
+ *     the Edge Detection Algorithm.  This method searches for the beginning and end
+ *     of the Data Eye with out scanning every DSQ delay value. The following is a
+ *     detailed description of the algorithm:
+ *
+ *     Four-Stage Data Eye Sweep
+ *
+ *     -Search starts at Delay value of 0.
+ *     -Search left in steps of 4/32UI looking for all Byte lanes Passing. Left from zero rolls over to a negative value.
+ *     -Negative values are translated to the high end of the delay range, but using Insertion delay comparison.
+ *     -For each passing byte lane, freeze delay at first passing value, but set mask so next steps will not compare for byte lanes that previously passed
+ *     -Switch to search right in steps of 1/32UI looking for fail.
+ *     -For each lane, starting delay for 1/32 sweep right is first passing delay from 4/32 sweep left.
+ *     -For each failing byte lane, freeze delay at first failing value, but set mask so next steps will not compare for byte lanes that previously failed
+ *     -Search right until all byte lanes have failed
+ *     -For each lane, right edge used by BIOS will be first failing delay value minus 1/32
+
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - All bytelanes pass
+ *     @return  FALSE - Some bytelanes fail
+*/
+BOOLEAN
+MemTTrainDQSEdgeDetect (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK         *NBPtr;
+  DIE_STRUCT           *MCTPtr;
+  DQS_POS_SWEEP_TABLE  *SweepTablePtr;
+  UINT8                SweepTableSize;
+  SWEEP_INFO           SweepData;
+  BOOLEAN              Status;
+  UINT16               CurrentResult;
+  UINT16               AlignedResult;
+  UINT16               OffsetResult;
+  UINT8                StageIndex;
+  UINT8                CsIndex;
+  UINT8                CsPerDelay;
+  UINT8                i;
+
+  Status = TRUE;
+  //
+  // Initialize Object Pointers
+  //
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  //
+  // Initialize stack variables
+  //
+  LibAmdMemFill (&SweepData, 0, sizeof (SWEEP_INFO), &NBPtr->MemPtr->StdHeader);
+  //
+  /// Get Pointer to Sweep Table
+  //
+  if (TechPtr->Direction == DQS_READ_DIR) {
+    SweepTablePtr = InsSweepTableByte;
+    SweepTableSize = GET_SIZE_OF (InsSweepTableByte);
+  } else {
+    SweepTablePtr = SweepTableByte;
+    SweepTableSize = GET_SIZE_OF (SweepTableByte);
+  }
+  //
+  // Get number of CS to train
+  //
+  CsPerDelay = NBPtr->CSPerDelay (NBPtr);
+  //
+  /// Set up the test Pattern, exit if no Memory
+  //
+  if (MemTInitTestPatternAddress (TechPtr, &SweepData) == FALSE) {
+    LibAmdMemFill (&NBPtr->ChannelPtr->FailingBitMask[ (TechPtr->ChipSel * MAX_BYTELANES_PER_CHANNEL) ],
+      0,
+      (MAX_BYTELANES_PER_CHANNEL * CsPerDelay),
+      &NBPtr->MemPtr->StdHeader);
+    return FALSE;
+  }
+  //
+  // Clear Error Flag
+  //
+  SweepData.Error = FALSE;
+  NBPtr->FamilySpecificHook[InitialzeRxEnSeedlessByteLaneError] (NBPtr, NBPtr);
+  //
+  /// Process Sweep table, using entries from the table to determine Starting and Ending Delays
+  /// as well as the Step size and criteria for evaluating whether the correct result is found.
+  ///
+  /// Delay values at this level are an abstract range of values which gets scaled to the actual value
+  /// before it is written to the hardware. This allows NB specific code to handle the scaling as a
+  ///  function of frequency or other conditions.
+  //
+  for (StageIndex = 0; (StageIndex < SweepTableSize) && (SweepData.Error == FALSE); StageIndex++) {
+
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSTAGE: %d\t", StageIndex);
+    //
+    /// Initialize SweepData variables
+    //
+    SweepData.BeginDelay = SweepTablePtr->BeginDelay;
+    SweepData.EndDelay = SweepTablePtr->EndDelay;
+    SweepData.Step = 0;                                    /// Step Value will be 0 to start.
+    SweepData.EndResult = SweepTablePtr->EndResult;
+    if (!(MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining])) {
+      SweepData.EndResult |= 0x0100;
+    }
+    SweepData.Edge = SweepTablePtr->MinMax;
+    SweepData.InsertionDelayMsk = 0;
+    SweepData.ResultFound = 0x0000;
+    //
+    // Set Training Delays Pointer.
+    //
+    if (TechPtr->Direction == DQS_READ_DIR) {
+      SweepData.TrnDelays = (INT8 *) ((SweepData.Edge == RIGHT_EDGE) ? NBPtr->ChannelPtr->RdDqsMaxDlys : NBPtr->ChannelPtr->RdDqsMinDlys);
+    } else {
+      SweepData.TrnDelays = (INT8 *) ((SweepData.Edge == RIGHT_EDGE) ? NBPtr->ChannelPtr->WrDatMaxDlys : NBPtr->ChannelPtr->WrDatMinDlys);
+    };
+    //
+    /// Set initial TrnDelay Values if necessary
+    //
+    IDS_HDT_CONSOLE (MEM_FLOW, "Sweeping %s DQS, %s from ", (TechPtr->Direction == DQS_READ_DIR) ?"Read":"Write", (SweepTablePtr->ScanDir == INC_DELAY) ? "incrementing":"decrementing");
+    if (SweepData.BeginDelay != LAST_DELAY) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "%02x", (UINT16) MemTScaleDelayVal (TechPtr, SweepData.BeginDelay));
+      for (i = 0; i < ((MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8); i++) {
+        SweepData.TrnDelays[i] = SweepData.BeginDelay;
+      }
+    } else {
+      IDS_HDT_CONSOLE (MEM_FLOW, "Current Delay");
+      SweepData.Step = SweepTablePtr->Step;
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, " by %02x, until all bytelanes %s.\n\n", (UINT16) MemTScaleDelayVal (TechPtr, ABS (SweepTablePtr->Step)), (SweepData.EndResult == 0xFFFF)?"PASS":"FAIL");
+
+    //-------------------------------------------------------------------
+    //   Sweep DQS Delays
+    //   MemTContinueSweep function returns false to break out of loop.
+    //   There are no other breaks out of this loop.
+    //-------------------------------------------------------------------
+    while (MemTContinueSweep (TechPtr, &SweepData)) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tByte Lane    : 08 07 06 05 04 03 02 01 00\n");
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tDQS Delays   : %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
+      (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[8]),
+      (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[7]), (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[6]),
+      (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[5]), (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[4]),
+      (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[3]), (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[2]),
+      (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[1]), (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[0])
+       );
+      //
+      /// Set Step Value
+      //
+      SweepData.Step = SweepTablePtr->Step;
+      CurrentResult = 0xFFFF;
+      //
+      /// Chip Select Loop: Test the Pattern for all populated CS that are controlled by the current delay registers
+      //
+      for (CsIndex = 0; CsIndex < CsPerDelay ; CsIndex++, TechPtr->ChipSel++) {
+        ASSERT (CsIndex < MAX_CS_PER_CHANNEL);
+        ASSERT (TechPtr->ChipSel < MAX_CS_PER_CHANNEL);
+        if (SweepData.CsAddrValid[CsIndex] == TRUE) {
+          //
+          /// If this is a Write Dqs sweep, Write the pattern now.
+          //
+          if (TechPtr->Direction == DQS_WRITE_DIR) {
+            NBPtr->WritePattern (NBPtr, SweepData.TestAddrRJ16[CsIndex], TechPtr->PatternBufPtr, TechPtr->PatternLength);
+          }
+          //
+          /// Read the Pattern Back
+          //
+          NBPtr->ReadPattern (NBPtr, TechPtr->TestBufPtr, SweepData.TestAddrRJ16[CsIndex], TechPtr->PatternLength);
+          //
+          /// Compare the Pattern and Merge the results using InsertionDelayMsk
+          //
+          AlignedResult = NBPtr->CompareTestPattern (NBPtr, TechPtr->TestBufPtr, TechPtr->PatternBufPtr, TechPtr->PatternLength * 64);
+          CurrentResult &= AlignedResult | SweepData.InsertionDelayMsk;
+          if (SweepData.InsertionDelayMsk != 0) {
+            OffsetResult = NBPtr->InsDlyCompareTestPattern (NBPtr, TechPtr->TestBufPtr, TechPtr->PatternBufPtr, TechPtr->PatternLength * 64);
+            CurrentResult &= (OffsetResult | (~SweepData.InsertionDelayMsk));
+          }
+          //
+          /// Flush the Test Pattern
+          //
+          NBPtr->FlushPattern (NBPtr, SweepData.TestAddrRJ16[CsIndex], TechPtr->PatternLength);
+          NBPtr->FamilySpecificHook[ResetRxFifoPtr] (NBPtr, NBPtr);
+        }
+      } /// End Chip Select Loop
+      TechPtr->ChipSel = TechPtr->ChipSel - CsIndex;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tResult       :  %c  %c  %c  %c  %c  %c  %c  %c  %c \n",
+        (SweepData.ResultFound & ((UINT16) 1 << (8))) ? ' ':(CurrentResult & ((UINT16) 1 << (8))) ? 'P':'.',
+        (SweepData.ResultFound & ((UINT16) 1 << (7))) ? ' ':(CurrentResult & ((UINT16) 1 << (7))) ? 'P':'.',
+        (SweepData.ResultFound & ((UINT16) 1 << (6))) ? ' ':(CurrentResult & ((UINT16) 1 << (6))) ? 'P':'.',
+        (SweepData.ResultFound & ((UINT16) 1 << (5))) ? ' ':(CurrentResult & ((UINT16) 1 << (5))) ? 'P':'.',
+        (SweepData.ResultFound & ((UINT16) 1 << (4))) ? ' ':(CurrentResult & ((UINT16) 1 << (4))) ? 'P':'.',
+        (SweepData.ResultFound & ((UINT16) 1 << (3))) ? ' ':(CurrentResult & ((UINT16) 1 << (3))) ? 'P':'.',
+        (SweepData.ResultFound & ((UINT16) 1 << (2))) ? ' ':(CurrentResult & ((UINT16) 1 << (2))) ? 'P':'.',
+        (SweepData.ResultFound & ((UINT16) 1 << (1))) ? ' ':(CurrentResult & ((UINT16) 1 << (1))) ? 'P':'.',
+        (SweepData.ResultFound & ((UINT16) 1 << (0))) ? ' ':(CurrentResult & ((UINT16) 1 << (0))) ? 'P':'.'
+        );
+      //
+      /// Merge current result into cumulative result and make it positive.
+      //
+      SweepData.ResultFound |= ~(CurrentResult ^ SweepData.EndResult);
+
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tResultFound  :  %c  %c  %c  %c  %c  %c  %c  %c  %c \n\n",
+        (SweepData.ResultFound & ((UINT16) 1 << (8))) ? 'Y':' ',
+        (SweepData.ResultFound & ((UINT16) 1 << (7))) ? 'Y':' ',
+        (SweepData.ResultFound & ((UINT16) 1 << (6))) ? 'Y':' ',
+        (SweepData.ResultFound & ((UINT16) 1 << (5))) ? 'Y':' ',
+        (SweepData.ResultFound & ((UINT16) 1 << (4))) ? 'Y':' ',
+        (SweepData.ResultFound & ((UINT16) 1 << (3))) ? 'Y':' ',
+        (SweepData.ResultFound & ((UINT16) 1 << (2))) ? 'Y':' ',
+        (SweepData.ResultFound & ((UINT16) 1 << (1))) ? 'Y':' ',
+        (SweepData.ResultFound & ((UINT16) 1 << (0))) ? 'Y':' '
+        );
+    } /// End of Delay Sweep
+    //
+    /// Place Final delay values at last passing delay.
+    //
+    if (SweepData.ResultFound == 0xFFFF) {
+      if ( ABS (SweepData.Step) == 1) {
+        for (i = 0; i < ((MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8) ; i++) {
+          if ((SweepData.EndResult & ((UINT16) (1 << i))) == 0) {
+            SweepData.TrnDelays[i] = SweepData.TrnDelays[i] - SweepData.Step;
+          }
+        }
+      }
+    }
+    //
+    // Update Pointer to Sweep Table
+    //
+    SweepTablePtr++;
+  }///End of Edge Detect loop
+  //
+  /// If No Errors are detected, Calculate Data Eye Width and Center
+  //
+  if (SweepData.Error == FALSE) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\tData Eye Results:\n\n");
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\tByte     Left     Right\n");
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\tLane     Edge     Edge     Width     Center\n");
+    for (i = 0; i < ((MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8) ; i++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\t %0d", i);
+      TechPtr->Bytelane = i;
+      if (!MemTDataEyeSave (TechPtr, &SweepData, i)) {
+        break;
+      }
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+      if (SweepData.Error == TRUE) {
+        Status = FALSE;
+      }
+    }
+  } else {
+    Status = FALSE;
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\t--DATA EYE NOT FOUND--\n\n");
+    NBPtr->FamilySpecificHook[TrackRxEnSeedlessRdWrNoWindBLError] (NBPtr, &SweepData);
+  }
+  return Status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     Initialize the Test Pattern Address for two chip selects and, if this
+ *     is a Write Data Eye, write the initial test pattern.
+ *
+ *     Test Address is stored in the Sweep info struct.  If Memory is not present
+ *     then return with False.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   *SweepPtr -  Pointer to SWEEP_INFO structure.
+ *
+ *     @return  BOOLEAN
+ *              TRUE  - Memory is present
+ *              FALSE - No memory present on this Chip Select pair.
+ *
+**
+ */
+BOOLEAN
+STATIC
+MemTInitTestPatternAddress (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   SWEEP_INFO *SweepPtr
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  UINT8 ChipSel;
+  UINT8 CsPerDelay;
+  UINT8 CsIndex;
+  BOOLEAN BanksPresent;
+
+  NBPtr = TechPtr->NBPtr;
+  BanksPresent = FALSE;
+  CsPerDelay = NBPtr->CSPerDelay (NBPtr);
+  ChipSel = TechPtr->ChipSel;
+  for (CsIndex = 0; CsIndex < CsPerDelay; ChipSel++, CsIndex++, TechPtr->ChipSel++) {
+    ASSERT (CsIndex < MAX_CS_PER_CHANNEL);
+    ASSERT (ChipSel < MAX_CS_PER_CHANNEL);
+    ASSERT (TechPtr->ChipSel < MAX_CS_PER_CHANNEL);
+    //
+    /// If memory is present on this cs, get the test addr
+    //
+    if (NBPtr->GetSysAddr (NBPtr, ChipSel, &(SweepPtr->TestAddrRJ16[CsIndex]))) {
+      if (!(NBPtr->MCTPtr->Status[SbLrdimms]) || ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0)) {
+        BanksPresent = TRUE;
+        SweepPtr->CsAddrValid[CsIndex] = TRUE;
+        //
+        /// If this is a Read Dqs sweep, Write the pattern now.
+        //
+        if (TechPtr->Direction == DQS_READ_DIR) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "\tTestAddr: %x0000\n", SweepPtr->TestAddrRJ16[CsIndex]);
+          NBPtr->WritePattern (NBPtr, SweepPtr->TestAddrRJ16[CsIndex], TechPtr->PatternBufPtr, TechPtr->PatternLength);
+        }
+      }
+    } else {
+      SweepPtr->CsAddrValid[CsIndex] = FALSE;
+    }
+  } /// End Chip Select Loop
+  TechPtr->ChipSel = TechPtr->ChipSel - CsIndex;
+  //
+  /// return FALSE if no ChipSelects present.
+  //
+  return BanksPresent;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *     Test Conditions for exiting the training loop, set the next delay value,
+ *     and return status
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   *SweepPtr -  Pointer to SWEEP_INFO structure.
+ *
+ *     @return  BOOLEAN
+ *              TRUE  - Continue to test with next delay setting
+ *              FALSE - Exit training loop.  Either the result has been found or
+ *                      end of delay range has been reached.
+*/
+BOOLEAN
+STATIC
+MemTContinueSweep (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   SWEEP_INFO *SweepPtr
+  )
+{
+  BOOLEAN Status;
+  Status = FALSE;
+  if (SweepPtr->ResultFound != 0xFFFF) {
+    Status = MemTSetNextDelay (TechPtr, SweepPtr);
+  }
+  TechPtr->NBPtr->FamilySpecificHook[RegAccessFence] (TechPtr->NBPtr, NULL);
+  return Status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets the next delay value for each bytelane that needs to
+ *      be advanced.  It checks the bounds of the delay to see if we are at the
+ *      end of the range.  If we are to close to advance a whole step value, but
+ *      not at the boundary, then we set the delay to the boundary.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   *SweepPtr -  Pointer to SWEEP_INFO structure.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemTSetNextDelay (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   SWEEP_INFO *SweepPtr
+  )
+{
+  DIE_STRUCT           *MCTPtr;
+  UINT8 i;
+
+  MCTPtr =  TechPtr->NBPtr->MCTPtr;
+  //
+  ///< Loop through bytelanes
+  //
+  for (i = 0; i < ((MCTPtr->Status[SbEccDimms] && TechPtr->NBPtr->IsSupported[EccByteTraining]) ? 9 : 8) ; i++) {
+    //
+    /// Skip Bytelanes that have already reached the desired result
+    //
+    if ( (SweepPtr->ResultFound  & ((UINT16)1 << i)) == 0) {
+      //
+      /// If a bytelane has reached the end, flag an error and exit
+      //
+      if (SweepPtr->TrnDelays[i] == SweepPtr->EndDelay) {
+        if ((SweepPtr->EndResult & ((UINT16) (1 << i))) != 0) {
+          MCTPtr->ErrStatus[EsbNoDqsPos] = TRUE;
+          SweepPtr->Error = TRUE;
+        }
+        return FALSE;
+      }
+      //
+      /// If the Current delay value is less than a step away from EndDelay,
+      //
+      if ( ABS (SweepPtr->EndDelay - SweepPtr->TrnDelays[i]) < ABS (SweepPtr->Step)) {
+        /// set to EndDelay.
+        //
+        SweepPtr->TrnDelays[i] = SweepPtr->EndDelay;
+      } else {
+        //
+        /// Otherwise, add the step value to it
+        SweepPtr->TrnDelays[i] = SweepPtr->TrnDelays[i] + SweepPtr->Step;
+      }
+      //
+      /// Set InsertionDelayMsk bit if Delay < 0 for this bytelane
+      //
+      if (SweepPtr->TrnDelays[i] < 0) {
+        SweepPtr->InsertionDelayMsk |= ((UINT16) 1 << i);
+      } else {
+        SweepPtr->InsertionDelayMsk &= ~((UINT16) 1 << i);
+      }
+      //
+      /// Write the scaled value to the Delay Register
+      //
+      TechPtr->SetDQSDelayCSR (TechPtr, i, MemTScaleDelayVal (TechPtr, SweepPtr->TrnDelays[i]));
+    }
+  }
+  return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function accepts a delay value in 32nd of a UI and converts it to an
+ *     actual register value, taking into consideration NB type, rd/wr,
+ *     and frequency.
+ *
+ *     Delay = (Min + (Delay * ( (Max - Min) / TRN_DELAY_MAX) )) & Mask
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       *Delay     - INT8 of delay value;
+ *
+ *     @return  UINT8 of the adjusted delay value
+*/
+UINT8
+STATIC
+MemTScaleDelayVal (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       INT8 Delay
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  TRN_DLY_PARMS Parms;
+  TRN_DLY_TYPE DelayType;
+  UINT8 NewDelay;
+  INT8 Factor;
+  INT8 ScaledDelay;
+
+  NBPtr = TechPtr->NBPtr;
+  //
+  // Determine Delay Type, Get Delay Parameters, and return scaled Delay value
+  //
+  DelayType = (TechPtr->Direction == DQS_WRITE_DIR) ? AccessWrDatDly : AccessRdDqsDly;
+  NBPtr->GetTrainDlyParms (NBPtr, DelayType, &Parms);
+  Factor = ((Parms.Max - Parms.Min) / TRN_DELAY_MAX);
+  ScaledDelay = Delay * Factor;
+  NewDelay = (Parms.Min + ScaledDelay) & Parms.Mask;
+  return NewDelay;
+}
+
+
+
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function calculates the Center of the Data eye for the specified byte lane
+ *       and stores its DQS Delay value for reference.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   *SweepPtr -  Pointer to SWEEP_INFO structure.
+ *     @param[in]       ByteLane  -  Bytelane number being targeted
+ *
+ */
+BOOLEAN
+STATIC
+MemTDataEyeSave (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   SWEEP_INFO *SweepPtr,
+  IN       UINT8 ByteLane
+  )
+{
+  MEM_NB_BLOCK *NBPtr;
+  UINT8 EyeCenter;
+  UINT8 DlyMin;
+  UINT8 DlyMax;
+  UINT8 EyeWidth;
+  UINT8 Dimm;
+  CH_DEF_STRUCT *ChanPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  ChanPtr = NBPtr->ChannelPtr;
+
+  ASSERT (ByteLane < ((NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8));
+  //
+  // Calculate Data Eye edges, Width, and Center in real terms.
+  //
+  if (TechPtr->Direction == DQS_READ_DIR) {
+    DlyMin = MemTScaleDelayVal (TechPtr, ChanPtr->RdDqsMinDlys[ByteLane]);
+    DlyMax = MemTScaleDelayVal (TechPtr, ChanPtr->RdDqsMaxDlys[ByteLane]);
+    EyeWidth = MemTScaleDelayVal (TechPtr, (ChanPtr->RdDqsMaxDlys[ByteLane] - ChanPtr->RdDqsMinDlys[ByteLane]));
+    EyeCenter = MemTScaleDelayVal (TechPtr, ((ChanPtr->RdDqsMinDlys[ByteLane] + ChanPtr->RdDqsMaxDlys[ByteLane] + 1) / 2));
+    if (!NBPtr->FamilySpecificHook[RdDqsDlyRestartChk] (NBPtr, &EyeCenter)) {
+      return FALSE;
+    }
+    ChanPtr->RdDqsMinDlys[ByteLane] = DlyMin;
+    ChanPtr->RdDqsMaxDlys[ByteLane] = DlyMax;
+    NBPtr->FamilySpecificHook[ForceRdDqsPhaseB] (NBPtr, &EyeCenter);
+  } else {
+    DlyMin = MemTScaleDelayVal (TechPtr, ChanPtr->WrDatMinDlys[ByteLane]);
+    DlyMax = MemTScaleDelayVal (TechPtr, ChanPtr->WrDatMaxDlys[ByteLane]);
+    EyeWidth = MemTScaleDelayVal (TechPtr, (ChanPtr->WrDatMaxDlys[ByteLane] - ChanPtr->WrDatMinDlys[ByteLane]));
+    EyeCenter = MemTScaleDelayVal (TechPtr, ((ChanPtr->WrDatMinDlys[ByteLane] + ChanPtr->WrDatMaxDlys[ByteLane] + 1) / 2));
+    ChanPtr->WrDatMinDlys[ByteLane] = DlyMin;
+    ChanPtr->WrDatMaxDlys[ByteLane] = DlyMax;
+  }
+  //
+  // Flag error for small window.
+  //
+  if (EyeWidth < MemTScaleDelayVal (TechPtr, NBPtr->MinDataEyeWidth (NBPtr))) {
+    TechPtr->SmallDqsPosWindow = TRUE;
+    SweepPtr->Error = TRUE;
+    NBPtr->FamilySpecificHook[TrackRxEnSeedlessRdWrSmallWindBLError] (NBPtr, NULL);
+  }
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "        %02x       %02x       %02x         %02x", DlyMin, DlyMax, EyeWidth, EyeCenter);
+
+  TechPtr->SetDQSDelayCSR (TechPtr, ByteLane, EyeCenter);
+  if (!SweepPtr->Error) {
+    TechPtr->DqsRdWrPosSaved |= (UINT8)1 << ByteLane;
+  }
+  TechPtr->DqsRdWrPosSaved |= 0xFE00;
+
+  Dimm = (TechPtr->ChipSel / 2) * TechPtr->DlyTableWidth () + ByteLane;
+  if (TechPtr->Direction == DQS_READ_DIR) {
+    ChanPtr->RdDqsDlys[Dimm] = EyeCenter;
+  } else {
+    ChanPtr->WrDatDlys[Dimm] = EyeCenter + ChanPtr->WrDqsDlys[Dimm];
+  }
+
+  return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttEdgeDetect.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttEdgeDetect.h
new file mode 100644
index 0000000000..a8e36bec48
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttEdgeDetect.h
@@ -0,0 +1,118 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttEdgeDetect.h
+ *
+ * Technology Common Training Header file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTTEDGEDETECT_H_
+#define _MTTEDGEDETECT_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
+#define SCAN_LEFT       0            ///<  Scan Down
+#define SCAN_RIGHT      1            ///<  Scan Up
+#define LEFT_EDGE       0            ///<  searching for the left edge
+#define RIGHT_EDGE      1            ///<  searching for the right edge
+
+#define SweepStages     4
+#define TRN_DELAY_MAX   31           ///<  Max Virtual delay value for DQS Position Training
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ *  Sweep Table Structure. ROM based table defining parameters for DQS position
+ *  training delay sweep.
+*/
+typedef struct {
+  INT8    BeginDelay;          ///<  Starting Delay Value
+  INT8    EndDelay;            ///<  Ending Delay Value
+  BOOLEAN ScanDir;             ///<  Scan Direction.  0 = down, 1 = up
+  INT8    Step;                ///<  Amount to increment delay value
+  UINT16  EndResult;           ///<  Result value to stop sweeping (to compare with failure mask)
+  BOOLEAN MinMax;              ///<  Flag indicating lower (left edge) or higher(right edge)
+} DQS_POS_SWEEP_TABLE;
+
+/**
+ * Sweep Information Struct - Used to track data through the DQS Delay Sweep
+ *
+*/
+typedef struct _SWEEP_INFO {
+  BOOLEAN Error;                               ///< Indicates an Error has been found
+  UINT32  TestAddrRJ16[MAX_CS_PER_CHANNEL];    ///< System address of chipselects RJ 16 bits (Addr[47:16])
+  BOOLEAN CsAddrValid[MAX_CS_PER_CHANNEL];     ///< Indicates which chipselects to test
+  INT8    BeginDelay;                          ///< Beginning Delay value (Virtual)
+  INT8    EndDelay;                            ///< Ending Delay value (Virtual)
+  INT8    Step;                                ///< Amount to Inc or Dec Virtual Delay value
+  BOOLEAN Edge;                                ///< Left or right edge (0 = LEFT, 1= RIGHT)
+  UINT16  EndResult;                           ///< Result value that will stop a Dqs Sweep
+  UINT16  InsertionDelayMsk;                   ///< Mask of Byte Lanes that should use ins. dly. comparison
+  UINT16  LaneMsk;                             ///< Mask indicating byte lanes to update
+  UINT16  ResultFound;                         ///< Mask indicating byte lanes where desired result was found on a sweep
+  INT8    *TrnDelays;                          ///< Delay Values for each byte (Virtual).  Points into the delay values
+} SWEEP_INFO;                                  ///< stored in the CH_DEF_STRUCT.
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#endif  /* _MTTEDGEDETECT_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttdimbt.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttdimbt.c
new file mode 100644
index 0000000000..1339bf586a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttdimbt.c
@@ -0,0 +1,1424 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttdimmbt.c
+ *
+ * Technology Dimm Based Training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_MTTDIMBT_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemTInitDqsPos4RcvrEnByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+STATIC
+MemTSetRcvrEnDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly
+  );
+
+VOID
+STATIC
+MemTLoadRcvrEnDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver
+  );
+
+BOOLEAN
+STATIC
+MemTSaveRcvrEnDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly,
+  IN       UINT16 CmpResultRank0,
+  IN       UINT16 CmpResultRank1
+  );
+
+VOID
+STATIC
+MemTResetDctWrPtrByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver
+  );
+
+UINT16
+STATIC
+MemTCompare1ClPatternByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[]
+  );
+
+VOID
+STATIC
+MemTSkipChipSelPass1Byte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT8 *ChipSelPtr
+  );
+
+VOID
+STATIC
+MemTSkipChipSelPass2Byte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT8 *ChipSelPtr
+  );
+
+UINT8
+STATIC
+MemTMaxByteLanesByte ( VOID );
+
+UINT8
+STATIC
+MemTDlyTableWidthByte ( VOID );
+
+VOID
+STATIC
+MemTSetDqsDelayCsrByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ByteLane,
+  IN       UINT8 Dly
+  );
+
+VOID
+STATIC
+MemTDqsWindowSaveByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ByteLane,
+  IN       UINT8 DlyMin,
+  IN       UINT8 DlyMax
+  );
+
+BOOLEAN
+STATIC
+MemTFindMaxRcvrEnDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+     OUT   UINT8 *ChipSel
+  );
+
+UINT16
+STATIC
+MemTCompare1ClPatternOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT8 Side,
+  IN       UINT8 Receiver,
+  IN       BOOLEAN Side1En
+  );
+
+VOID
+STATIC
+MemTLoadRcvrEnDlyOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver
+  );
+
+VOID
+STATIC
+MemTSetRcvrEnDlyOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly
+  );
+
+VOID
+STATIC
+MemTLoadInitialRcvEnDlyOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver
+  );
+
+UINT8
+STATIC
+MemTFindMinMaxGrossDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       TRN_DLY_TYPE TrnDlyType,
+  IN       BOOLEAN IfMax
+  );
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function enables byte based training if called
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTDimmByteTrainInit (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 DctCount;
+  UINT8 ChannelCount;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  TechPtr->InitDQSPos4RcvrEn = MemTInitDqsPos4RcvrEnByte;
+  TechPtr->SetRcvrEnDly = MemTSetRcvrEnDlyByte;
+  TechPtr->LoadRcvrEnDly = MemTLoadRcvrEnDlyByte;
+  TechPtr->SaveRcvrEnDly = MemTSaveRcvrEnDlyByte;
+  TechPtr->SaveRcvrEnDlyFilter = MemTSaveRcvrEnDlyByteFilterOpt;
+  TechPtr->ResetDCTWrPtr = MemTResetDctWrPtrByte;
+  TechPtr->Compare1ClPattern = MemTCompare1ClPatternByte;
+  TechPtr->SkipChipSelPass1 = MemTSkipChipSelPass1Byte;
+  TechPtr->SkipChipSelPass2 = MemTSkipChipSelPass2Byte;
+  TechPtr->MaxByteLanes = MemTMaxByteLanesByte;
+  TechPtr->DlyTableWidth = MemTDlyTableWidthByte;
+  TechPtr->SetDQSDelayCSR = MemTSetDqsDelayCsrByte;
+  TechPtr->DQSWindowSave = MemTDqsWindowSaveByte;
+  TechPtr->FindMaxDlyForMaxRdLat = MemTFindMaxRcvrEnDlyByte;
+  TechPtr->Compare1ClPatternOpt = MemTCompare1ClPatternOptByte;
+  TechPtr->LoadRcvrEnDlyOpt = MemTLoadRcvrEnDlyOptByte;
+  TechPtr->SetRcvrEnDlyOpt = MemTSetRcvrEnDlyOptByte;
+  TechPtr->InitializeVariablesOpt = MemTInitializeVariablesOptByte;
+  TechPtr->GetMaxValueOpt = MemTGetMaxValueOptByte;
+  TechPtr->SetSweepErrorOpt = MemTSetSweepErrorOptByte;
+  TechPtr->CheckRcvrEnDlyLimitOpt = MemTCheckRcvrEnDlyLimitOptByte;
+  TechPtr->LoadInitialRcvrEnDlyOpt = MemTLoadInitialRcvEnDlyOptByte;
+  TechPtr->GetMinMaxGrossDly = MemTFindMinMaxGrossDlyByte;
+  // Dynamically allocate buffers for storing trained timings.
+  DctCount = MCTPtr->DctCount;
+  ChannelCount = MCTPtr->DctData[0].ChannelCount;
+  AllocHeapParams.RequestedBufferSize = ((DctCount * ChannelCount) *
+                                         ((MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES) +
+                                          (MAX_DELAYS * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) +
+                                           (MAX_DIMMS * MAX_NUMBER_LANES)
+                                          )
+                                         );
+
+  if (NBPtr->MemPstateStage == MEMORY_PSTATE_1ST_STAGE) {
+    AllocHeapParams.RequestedBufferSize *= 2;
+  }
+
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_TRN_DATA_HANDLE, MCTPtr->NodeId, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &NBPtr->MemPtr->StdHeader) == AGESA_SUCCESS) {
+    for (Dct = 0; Dct < DctCount; Dct++) {
+      for (Channel = 0; Channel < ChannelCount; Channel++) {
+        MCTPtr->DctData[Dct].ChData[Channel].RowCount = MAX_DIMMS;
+        MCTPtr->DctData[Dct].ChData[Channel].ColumnCount = MAX_DELAYS;
+
+        MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr;
+        AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2;
+        MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr;
+        AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+        MCTPtr->DctData[Dct].ChData[Channel].RdDqsDlys = AllocHeapParams.BufferPtr;
+        AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+        MCTPtr->DctData[Dct].ChData[Channel].WrDatDlys = AllocHeapParams.BufferPtr;
+        AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+        MCTPtr->DctData[Dct].ChData[Channel].RdDqs__Dlys = AllocHeapParams.BufferPtr;
+        AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_NUMBER_LANES);
+        MCTPtr->DctData[Dct].ChData[Channel].RdDqsMinDlys = AllocHeapParams.BufferPtr;
+        AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+        MCTPtr->DctData[Dct].ChData[Channel].RdDqsMaxDlys = AllocHeapParams.BufferPtr;
+        AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+        MCTPtr->DctData[Dct].ChData[Channel].WrDatMinDlys = AllocHeapParams.BufferPtr;
+        AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+        MCTPtr->DctData[Dct].ChData[Channel].WrDatMaxDlys = AllocHeapParams.BufferPtr;
+        AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+        MCTPtr->DctData[Dct].ChData[Channel].FailingBitMask = AllocHeapParams.BufferPtr;
+        AllocHeapParams.BufferPtr += (MAX_CS_PER_CHANNEL * MAX_DELAYS);
+        if (NBPtr->MemPstateStage == MEMORY_PSTATE_1ST_STAGE) {
+          MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlysMemPs1 = (UINT16 *) AllocHeapParams.BufferPtr;
+          AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2;
+          MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlysMemPs1 = AllocHeapParams.BufferPtr;
+          AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+          MCTPtr->DctData[Dct].ChData[Channel].RdDqsDlysMemPs1 = AllocHeapParams.BufferPtr;
+          AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+          MCTPtr->DctData[Dct].ChData[Channel].WrDatDlysMemPs1 = AllocHeapParams.BufferPtr;
+          AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+          MCTPtr->DctData[Dct].ChData[Channel].RdDqs__DlysMemPs1 = AllocHeapParams.BufferPtr;
+          AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_NUMBER_LANES);
+          MCTPtr->DctData[Dct].ChData[Channel].RdDqsMinDlysMemPs1 = AllocHeapParams.BufferPtr;
+          AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+          MCTPtr->DctData[Dct].ChData[Channel].RdDqsMaxDlysMemPs1 = AllocHeapParams.BufferPtr;
+          AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+          MCTPtr->DctData[Dct].ChData[Channel].WrDatMinDlysMemPs1 = AllocHeapParams.BufferPtr;
+          AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+          MCTPtr->DctData[Dct].ChData[Channel].WrDatMaxDlysMemPs1 = AllocHeapParams.BufferPtr;
+          AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+          MCTPtr->DctData[Dct].ChData[Channel].FailingBitMaskMemPs1 = AllocHeapParams.BufferPtr;
+          AllocHeapParams.BufferPtr += (MAX_CS_PER_CHANNEL * MAX_DELAYS);
+
+        }
+      }
+    }
+  } else {
+    PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_FATAL, MCTPtr);
+    ASSERT(FALSE);  // Could not dynamically allocate buffers for storing trained timings
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function initializes the DQS Positions in preparation for Receiver Enable Training.
+ *  Write Position is no delay, Read Position is 1/2 Memclock delay
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemTInitDqsPos4RcvrEnByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 Dimm;
+  UINT8 ByteLane;
+  UINT8 WrDqs;
+
+  for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+    for (ByteLane = 0; ByteLane < MAX_DELAYS; ByteLane++) {
+      WrDqs = TechPtr->NBPtr->ChannelPtr->WrDqsDlys[(Dimm * MAX_DELAYS) + ByteLane];
+      TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqs);
+      TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRdDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), 0x3F);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function programs DqsRcvEnDly to additional index for DQS receiver enabled training
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver  - Current Chip select value
+ *     @param[in]       RcvEnDly  - receiver enable delay to be saved
+ */
+
+VOID
+STATIC
+MemTSetRcvrEnDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly
+  )
+{
+  UINT8 ByteLane;
+
+  ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+  for (ByteLane = 0; ByteLane < MAX_BYTELANES; ByteLane++) {
+    TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver >> 1, ByteLane), RcvEnDly);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function loads the DqsRcvEnDly from saved data and program to additional index
+ *  for DQS receiver enabled training
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver  - Current Chip select value
+ *
+ */
+
+VOID
+STATIC
+MemTLoadRcvrEnDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver
+  )
+{
+  UINT8 i;
+  UINT8 Dimm;
+  UINT16 Saved;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  Dimm = Receiver >> 1;
+  Saved = TechPtr->DqsRcvEnSaved;
+  for (i = 0; i < MAX_BYTELANES; i++) {
+    if (Saved & 1) {
+      TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver >> 1, i),
+      ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + i]);
+    }
+    Saved >>= 1;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function saves passing DqsRcvEnDly values to the stack
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver  - Current Chip select value
+ *     @param[in]       RcvEnDly  - receiver enable delay to be saved
+ *     @param[in]       CmpResultRank0 - compare result for Rank 0
+ *     @param[in]       CmpResultRank1 - compare result for Rank 1
+ *
+ *     @return  TRUE - All bytelanes pass
+ *     @return  FALSE - Some bytelanes fail
+ */
+
+BOOLEAN
+STATIC
+MemTSaveRcvrEnDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly,
+  IN       UINT16 CmpResultRank0,
+  IN       UINT16 CmpResultRank1
+  )
+{
+  UINT8 i;
+  UINT8 Passed;
+  UINT8 Saved;
+  UINT8 Mask;
+  UINT8 Dimm;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  Passed = (UINT8) ((CmpResultRank0 & CmpResultRank1) & 0xFF);
+
+  Saved = (UINT8) (TechPtr->DqsRcvEnSaved & Passed); //@attention - false passes filter (subject to be replaced with a better solution)
+  Dimm = Receiver >> 1;
+  Mask = 1;
+  for (i = 0; i < MAX_BYTELANES; i++) {
+    if (Passed & Mask) {
+      if (!(Saved & Mask)) {
+        ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + i] = RcvEnDly + 0x20;     // @attention -1 pass only
+        IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tBL %d = %02x", i, RcvEnDly + 0x20);
+      }
+      Saved |= Mask;
+    }
+    Mask <<= 1;
+  }
+  TechPtr->DqsRcvEnSaved = Saved;
+
+  if (Saved == 0xFF) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function performs a filtering functionality and saves passing DqsRcvEnDly
+ *  values to the stack
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver  - Current Chip select value
+ *     @param[in]       RcvEnDly  - receiver enable delay to be saved
+ *     @param[in]       CmpResultRank0 - compare result for Rank 0
+ *     @param[in]       CmpResultRank1 - compare result for Rank 1
+ *
+ *     @return  TRUE - All bytelanes pass
+ *     @return  FALSE - Some bytelanes fail
+ */
+
+BOOLEAN
+MemTSaveRcvrEnDlyByteFilter (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly,
+  IN       UINT16 CmpResultRank0,
+  IN       UINT16 CmpResultRank1
+  )
+{
+  UINT8 i;
+  UINT8 Passed;
+  UINT8 Saved;
+  UINT8 Mask;
+  UINT8 Dimm;
+  UINT8 MaxFilterDly;
+  CH_DEF_STRUCT *ChannelPtr;
+  MEM_DCT_CACHE *DctCachePtr;
+
+  ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+  DctCachePtr = TechPtr->NBPtr->DctCachePtr;
+
+  MaxFilterDly = TechPtr->MaxFilterDly;
+  Passed = (UINT8) ((CmpResultRank0 & CmpResultRank1) & 0xFF);
+
+  Dimm = Receiver >> 1;
+  Saved = (UINT8) TechPtr->DqsRcvEnSaved;
+  Mask = 1;
+  for (i = 0; i < MAX_BYTELANES; i++) {
+    if ((Passed & Mask) != 0) {
+      DctCachePtr->RcvEnDlyCounts [i] += 1;
+      if ((Saved & Mask) == 0) {
+        ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + i] = RcvEnDly + 0x20;
+        Saved |= Mask;
+        IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tBL %d = %02x", i, RcvEnDly + 0x20);
+      }
+    } else {
+      if (DctCachePtr->RcvEnDlyCounts [i] <= MaxFilterDly) {
+        DctCachePtr->RcvEnDlyCounts [i] = 0;
+        Saved &= ~Mask;
+      }
+    }
+    Mask <<= 1;
+  }
+
+  //-----------------------
+  TechPtr->DqsRcvEnSaved = (UINT16) Saved;
+
+  Saved = 0;
+  for (i = 0; i < MAX_BYTELANES; i++) {
+    if (DctCachePtr->RcvEnDlyCounts [i] >= MaxFilterDly) {
+      Saved |= (UINT8) 1 << i;
+    }
+  }
+
+  if (Saved == 0xFF) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function compares test pattern with data in buffer and return a pass/fail bitmap
+ *       for 8 Bytes
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Buffer[]  -  Buffer data from DRAM (Measured data from DRAM) to compare
+ *     @param[in]       Pattern[]  - Pattern (Expected data in ROM/CACHE) to compare against
+ *
+ *     @return  PASS - Bit map of results of comparison
+ */
+
+UINT16
+STATIC
+MemTCompare1ClPatternByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[]
+  )
+{
+  UINT16 i;
+  UINT16 j;
+  UINT16 Pass;
+  DIE_STRUCT *MCTPtr;
+
+  MCTPtr = TechPtr->NBPtr->MCTPtr;
+  if (MCTPtr->GangedMode && MCTPtr->Dct) {
+    j = 8;
+  } else {
+    j = 0;
+  }
+
+  Pass = 0xFFFF;
+  IDS_HDT_CONSOLE (MEM_FLOW, " -");
+  for (i = 0; i < 8; i++) {
+    if (Buffer[j] != Pattern[j]) {
+      // if bytelane n fails
+      Pass &= ~((UINT16)1 << (j % 8));    // clear bit n
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "  %c", (Buffer[j] == Pattern[j]) ? 'P' : '.');
+    j++;
+  }
+
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t        -");
+    for (i = 0, j -= 8; i < 8; i++, j++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, " %02x", Buffer[j]);
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t        -");
+    for (i = 0, j -= 8; i < 8; i++, j++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, " %02x", Pattern[j]);
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+  );
+
+  return Pass;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       The function resets the DCT input buffer write pointer.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver - Chip select
+ *
+ */
+
+VOID
+STATIC
+MemTResetDctWrPtrByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver
+  )
+{
+  UINT8 i;
+  UINT16 RcvEnDly;
+
+  ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+  for (i = 0; i < MAX_BYTELANES; i++) {
+    RcvEnDly = (UINT16) TechPtr->NBPtr->GetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver / 2, i));
+    TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver / 2, i), RcvEnDly);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function skips odd chip select if training at 800MT or above.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       *ChipSelPtr - Pointer to variable contains Chip select index
+ *
+ */
+
+VOID
+STATIC
+MemTSkipChipSelPass1Byte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT8 *ChipSelPtr
+  )
+{
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  // if the even chip select failed training, need to set CsTrainFail for odd chip select if present.
+  if (NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ((*ChipSelPtr) + 1))) {
+    if (NBPtr->DCTPtr->Timings.CsTrainFail & ((UINT16)1 << *ChipSelPtr)) {
+      NBPtr->DCTPtr->Timings.CsTrainFail |= (UINT16)1 << ((*ChipSelPtr) + 1);
+      if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, NBPtr->DCTPtr->Timings.CsTrainFail, &NBPtr->MemPtr->StdHeader)) {
+        ASSERT (FALSE);
+      }
+    }
+  }
+  (*ChipSelPtr)++;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  MemTSkipChipSelPass2Byte:
+ *
+ *       This function skips odd chip select if training at 800MT or above.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   *ChipSelPtr - Pointer to variable contains Chip select index
+ *
+ */
+
+VOID
+STATIC
+MemTSkipChipSelPass2Byte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT8 *ChipSelPtr
+  )
+{
+  if (*ChipSelPtr & 1) {
+    *ChipSelPtr = MAX_CS_PER_CHANNEL;    // skip all successions
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function determines the maximum number of byte lanes
+ *
+ *     @return  Max number of Bytelanes
+ */
+
+UINT8
+STATIC
+MemTMaxByteLanesByte ( VOID )
+{
+  return MAX_BYTELANES;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function determines the width of the delay tables (eg. RcvEnDlys, WrDqsDlys,...)
+ *
+ *     @return  Delay table width in bytes
+ */
+
+UINT8
+STATIC
+MemTDlyTableWidthByte ( VOID )
+{
+  return MAX_DELAYS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function writes the Delay value to a certain byte lane
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       ByteLane  -  Bytelane number being targeted
+ *     @param[in]       Dly - Delay value
+ *
+ */
+
+VOID
+STATIC
+MemTSetDqsDelayCsrByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ByteLane,
+  IN       UINT8 Dly
+  )
+{
+  UINT8 Reg;
+  UINT8 Dimm;
+
+  ASSERT (ByteLane <= MAX_BYTELANES);
+
+  if (!(TechPtr->DqsRdWrPosSaved & ((UINT8)1 << ByteLane))) {
+    Dimm = (TechPtr->ChipSel >> 1);
+
+    if (TechPtr->Direction == DQS_WRITE_DIR) {
+      Dly = Dly + ((UINT8) TechPtr->NBPtr->ChannelPtr->WrDqsDlys[(Dimm * MAX_DELAYS) + ByteLane]);
+      Reg = AccessWrDatDly;
+    } else {
+      Reg = AccessRdDqsDly;
+    }
+
+    TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, Reg, DIMM_BYTE_ACCESS (Dimm, ByteLane), Dly);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function programs the trained DQS delay for the specified byte lane
+ *       and stores its DQS window for reference.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       ByteLane  -  Bytelane number being targeted
+ *     @param[in]       DlyMin - Minimum delay value
+ *     @param[in]       DlyMax- Maximum delay value
+ *
+ */
+
+VOID
+STATIC
+MemTDqsWindowSaveByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ByteLane,
+  IN       UINT8 DlyMin,
+  IN       UINT8 DlyMax
+  )
+{
+  UINT8 DqsDelay;
+  UINT8 Dimm;
+  CH_DEF_STRUCT *ChanPtr;
+
+  ASSERT (ByteLane <= MAX_BYTELANES);
+  ChanPtr = TechPtr->NBPtr->ChannelPtr;
+
+  DqsDelay = ((DlyMin + DlyMax + 1) / 2) & 0x3F;
+  MemTSetDqsDelayCsrByte (TechPtr, ByteLane, DqsDelay);
+  TechPtr->DqsRdWrPosSaved |= (UINT8)1 << ByteLane;
+  TechPtr->DqsRdWrPosSaved |= 0xFF00;
+
+  Dimm = (TechPtr->ChipSel / 2) * MAX_DELAYS + ByteLane;
+  if (TechPtr->Direction == DQS_READ_DIR) {
+    ChanPtr->RdDqsDlys[Dimm] = DqsDelay;
+  } else {
+    ChanPtr->WrDatDlys[Dimm] = DqsDelay + ChanPtr->WrDqsDlys[Dimm];
+  }
+
+  if (TechPtr->Direction == DQS_READ_DIR) {
+    ChanPtr->RdDqsMinDlys[ByteLane] = DlyMin;
+    ChanPtr->RdDqsMaxDlys[ByteLane] = DlyMax;
+  } else {
+    ChanPtr->WrDatMinDlys[ByteLane] = DlyMin;
+    ChanPtr->WrDatMaxDlys[ByteLane] = DlyMax;
+  }
+
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function finds the DIMM that has the largest receiver enable delay.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[out]      *ChipSel   - Pointer to the Chip select that has the largest receiver enable delay.
+ *
+ *     @return   TRUE - A chip select can be found.
+ *     @return   FALSE - A chip select cannot be found.
+ */
+
+BOOLEAN
+STATIC
+MemTFindMaxRcvrEnDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+     OUT   UINT8 *ChipSel
+  )
+{
+  UINT8  Dimm;
+  UINT8  ByteLane;
+  UINT16 RcvEnDly;
+  UINT16 MaxDly;
+  UINT8  MaxDlyDimm;
+  BOOLEAN RetVal;
+
+  MEM_NB_BLOCK  *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  ChannelPtr = NBPtr->ChannelPtr;
+
+  RetVal = FALSE;
+  MaxDly = 0;
+  MaxDlyDimm = 0;
+  for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+    if ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << (Dimm << 1))) != 0) {
+      if ((NBPtr->DCTPtr->Timings.CsTrainFail & ((UINT16) 3 << (Dimm << 1))) == 0) {
+        // Only choose the dimm that does not fail training
+        for (ByteLane = 0; ByteLane < ((NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8); ByteLane++) {
+          RcvEnDly = ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + ByteLane];
+          if (RcvEnDly > MaxDly) {
+            MaxDly = RcvEnDly;
+            MaxDlyDimm = Dimm;
+            RetVal = TRUE;
+          }
+        }
+      }
+    }
+  }
+
+  if (NBPtr->MCTPtr->Status[Sb128bitmode] != 0) {
+    //The RcvrEnDlys of DCT1 DIMMs should also be considered while ganging.
+    NBPtr->SwitchDCT (NBPtr, 1);
+    ChannelPtr = NBPtr->ChannelPtr;
+    for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+      for (ByteLane = 0; ByteLane < ((NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8); ByteLane++) {
+        RcvEnDly = ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + ByteLane];
+        if (RcvEnDly > MaxDly) {
+          MaxDly = RcvEnDly;
+          MaxDlyDimm = Dimm;
+        }
+      }
+    }
+    NBPtr->SwitchDCT (NBPtr, 0);
+  }
+
+  TechPtr->MaxDlyForMaxRdLat = MaxDly;
+  *ChipSel = (MaxDlyDimm * 2);
+  return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function finds the DIMM that has the largest receiver enable delay + Read DQS Delay.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[out]      *ChipSel   - Pointer to the Chip select that has the largest receiver enable delay
+ *                                   + Read DQS Delay.
+ *
+ *     @return   TRUE - A chip select can be found.
+ *     @return   FALSE - A chip select cannot be found.
+ */
+
+BOOLEAN
+MemTFindMaxRcvrEnDlyRdDqsDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+     OUT   UINT8 *ChipSel
+  )
+{
+  UINT8  Dimm;
+  UINT8  ByteLane;
+  UINT16 RcvEnDly;
+  UINT16 RdDqsDly;
+  UINT16 TotalDly;
+  UINT16 MaxDly;
+  UINT8  MaxDlyDimm;
+  BOOLEAN RetVal;
+
+  MEM_NB_BLOCK  *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  ChannelPtr = NBPtr->ChannelPtr;
+
+  RetVal = FALSE;
+  MaxDly = 0;
+  MaxDlyDimm = 0;
+  for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+    if ((NBPtr->DCTPtr->Timings.CsTrainFail & ((UINT16) 3 << (Dimm << 1))) == 0) {
+      // Only choose the dimm that does not fail training
+      for (ByteLane = 0; ByteLane < MAX_BYTELANES; ByteLane++) {
+        RcvEnDly = ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + ByteLane];
+        // Before Dqs Position Training, this value is 0. So the maximum value for
+        // RdDqsDly needs to be added later when calculating the MaxRdLatency value
+        // after RcvEnDly training but before DQS Position Training.
+        RdDqsDly = ChannelPtr->RdDqsDlys[Dimm * MAX_DELAYS + ByteLane];
+        TotalDly = RcvEnDly + (RdDqsDly >> 1);
+        if (TotalDly > MaxDly) {
+          MaxDly = TotalDly;
+          MaxDlyDimm = Dimm;
+          RetVal = TRUE;
+        }
+      }
+    }
+  }
+
+  TechPtr->MaxDlyForMaxRdLat = MaxDly;
+  *ChipSel = (MaxDlyDimm * 2);
+  return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function finds the DIMM that has the largest receiver enable delay + Read DQS Delay for UNB
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[out]      *ChipSel   - Pointer to the Chip select that has the largest receiver enable delay
+ *                                   + Read DQS Delay.
+ *
+ *     @return   TRUE - A chip select can be found.
+ *     @return   FALSE - A chip select cannot be found.
+ */
+
+BOOLEAN
+MemTFindMaxRcvrEnDlyRdDqsDlyByteUnb (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+     OUT   UINT8 *ChipSel
+  )
+{
+  UINT8  Dimm;
+  UINT8  ByteLane;
+  UINT16 RcvEnDly;
+  UINT16 RdDqsDly;
+  UINT16 TotalDly;
+  UINT16 MaxDly;
+  UINT8  MaxDlyDimm;
+  BOOLEAN RetVal;
+
+  MEM_NB_BLOCK  *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  ChannelPtr = NBPtr->ChannelPtr;
+
+  RetVal = FALSE;
+  MaxDly = 0;
+  MaxDlyDimm = 0;
+  for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+    if ((NBPtr->DCTPtr->Timings.CsTrainFail & ((UINT16) 3 << (Dimm << 1))) == 0) {
+      // Only choose the dimm that does not fail training
+      for (ByteLane = 0; ByteLane < ((NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8); ByteLane++) {
+        RcvEnDly = ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + ByteLane];
+        // Before Dqs Position Training, this value is 0. So the maximum value for
+        // RdDqsDly needs to be added later when calculating the MaxRdLatency value
+        // after RcvEnDly training but before DQS Position Training.
+        RdDqsDly = ChannelPtr->RdDqsDlys[Dimm * MAX_DELAYS + ByteLane];
+        TotalDly = RcvEnDly + RdDqsDly;
+        if (TotalDly > MaxDly) {
+          MaxDly = TotalDly;
+          MaxDlyDimm = Dimm;
+          RetVal = TRUE;
+        }
+      }
+    }
+  }
+
+  TechPtr->MaxDlyForMaxRdLat = MaxDly;
+  *ChipSel = (MaxDlyDimm * 2);
+  return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function finds the minimum or maximum gross dly among all the bytes.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       TrnDlyType - Target Dly type
+ *     @param[in]       IfMax - If this is for maximum value or minimum
+ *
+ *     @return   minimum gross dly
+ */
+UINT8
+STATIC
+MemTFindMinMaxGrossDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       TRN_DLY_TYPE TrnDlyType,
+  IN       BOOLEAN IfMax
+  )
+{
+  UINT8 i;
+  UINT8 ByteLane;
+  UINT16 CsEnabled;
+  UINT8 MinMaxGrossDly;
+  UINT8 TrnDly;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  CsEnabled = NBPtr->DCTPtr->Timings.CsEnabled;
+  MinMaxGrossDly = IfMax ? 0 : 0xFF;
+
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+    if ((CsEnabled & (UINT16) (3 << (i << 1))) != 0) {
+      for (ByteLane = 0; ByteLane < ((NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8); ByteLane++) {
+        TrnDly = (UINT8) (GetTrainDlyFromHeapNb (NBPtr, TrnDlyType, DIMM_BYTE_ACCESS (i, ByteLane)) >> 5);
+        if ((IfMax && (TrnDly > MinMaxGrossDly)) || (!IfMax && (TrnDly < MinMaxGrossDly))) {
+          MinMaxGrossDly = TrnDly;
+        }
+      }
+    }
+  }
+
+  return MinMaxGrossDly;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function compares test pattern with data in buffer and return a pass/fail bitmap
+ *       for 8 Bytes for optimized receiver enable training
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Buffer[]  -  Buffer data from DRAM (Measured data from DRAM) to compare
+ *     @param[in]       Pattern[]  - Pattern (Expected data in ROM/CACHE) to compare against
+ *     @param[in]       Side - current side being targeted
+ *     @param[in]       Receiver - Current receiver value
+ *     @param[in]       Side1En - Indicates if the second side of the DIMM is being used
+ *     @return  PASS - Bit map of results of comparison
+ */
+
+UINT16
+STATIC
+MemTCompare1ClPatternOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT8 Side,
+  IN       UINT8 Receiver,
+  IN       BOOLEAN  Side1En
+  )
+{
+  UINT16 i;
+  UINT16 j;
+  UINT16 Pass;
+  DIE_STRUCT *MCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+  MCTPtr = TechPtr->NBPtr->MCTPtr;
+
+  if (MCTPtr->GangedMode && MCTPtr->Dct) {
+    j = 8;
+  } else {
+    j = 0;
+  }
+
+  Pass = 0xFFFF;
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDelay[BL] -");
+  for (i = 0; i < 8; i++) {
+    IDS_HDT_CONSOLE (MEM_FLOW, " %02x", TechPtr->RcvrEnDlyOpt[i] & 0xFF);
+    if (Buffer[j] != Pattern[j]) {
+      // if bytelane n fails
+      Pass &= ~((UINT16)1 << (j % 8));    // clear bit n
+      TechPtr->DqsRcvEnFirstPassValOpt[i] = 0;
+      TechPtr->GetFirstPassValOpt[i] = FALSE;
+      TechPtr->IncBy1ForNextCountOpt[i] = FALSE;
+      TechPtr->DqsRcvEnSavedOpt[i] = FALSE;
+      if (TechPtr->FilterStatusOpt[i] != DONE_FILTER) {
+        if (Side == ((Side1En ? 4 : 2) - 1)) {
+          TechPtr->RcvrEnDlyOpt[i] += FILTER_FIRST_STAGE_COUNT;
+        }
+      }
+    } else {
+      if (TechPtr->FilterSidePassCountOpt[i] == ((Side1En ? 4 : 2) - 1)) {
+        //Only apply filter if all sides have passed
+        if (TechPtr->FilterStatusOpt[i] != DONE_FILTER) {
+          if (TechPtr->GetFirstPassValOpt[i] == FALSE) {
+            // This is the first Pass, mark the start of filter check
+            TechPtr->DqsRcvEnFirstPassValOpt[i] = TechPtr->RcvrEnDlyOpt[i];
+            TechPtr->GetFirstPassValOpt[i] = TRUE;
+            TechPtr->IncBy1ForNextCountOpt[i] = FALSE;
+            TechPtr->RcvrEnDlyOpt[i]++;
+          } else {
+            if ((TechPtr->RcvrEnDlyOpt[i] - TechPtr->DqsRcvEnFirstPassValOpt[i]) < FILTER_WINDOW_SIZE) {
+              if (TechPtr->IncBy1ForNextCountOpt[i] == FALSE) {
+                TechPtr->RcvrEnDlyOpt[i] += FILTER_SECOND_STAGE_COUNT;
+                TechPtr->IncBy1ForNextCountOpt[i] = TRUE;
+              } else {
+                TechPtr->RcvrEnDlyOpt[i]++;
+                TechPtr->IncBy1ForNextCountOpt[i] = FALSE;
+              }
+            } else {
+              // End sweep and add offset to first pass
+              TechPtr->MaxRcvrEnDlyBlOpt[i] = TechPtr->DqsRcvEnFirstPassValOpt[i];
+              TechPtr->RcvrEnDlyOpt[i] = TechPtr->DqsRcvEnFirstPassValOpt[i] + FILTER_OFFSET_VALUE;
+              TechPtr->FilterStatusOpt[i] = DONE_FILTER;
+              TechPtr->FilterCountOpt++;
+            }
+          }
+        } else {
+          TechPtr->FilterSidePassCountOpt[i]++;
+        }
+      } else {
+        if (TechPtr->GetFirstPassValOpt[i] == FALSE) {
+          if (Side == ((Side1En ? 4 : 2) - 1)) {
+            TechPtr->RcvrEnDlyOpt[i] += FILTER_FIRST_STAGE_COUNT;
+          }
+        }
+        TechPtr->FilterSidePassCountOpt[i]++;
+      }
+      TechPtr->DqsRcvEnSavedOpt[i] = TRUE;
+      ChannelPtr->RcvEnDlys[(Receiver >> 1) * MAX_DELAYS + i] = TechPtr->RcvrEnDlyOpt[i];
+    }
+    if (Side == ((Side1En ? 4 : 2) - 1)) {
+      TechPtr->FilterSidePassCountOpt[i] = 0;
+    }
+    if (TechPtr->RcvrEnDlyOpt[i] >= TechPtr->RcvrEnDlyLimitOpt[i]) {
+      TechPtr->FilterCountOpt++;
+    }
+
+    j++;
+  }
+
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tPass/Fail -");
+    for (i = 0, j -= 8; i < 8; i++, j++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "  %c", (Buffer[j] == Pattern[j]) ? 'P' : '.');
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Measured -");
+    for (i = 0, j -= 8; i < 8; i++, j++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, " %02x", Buffer[j]);
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Expected -");
+    for (i = 0, j -= 8; i < 8; i++, j++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, " %02x", Pattern[j]);
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+  );
+
+  return Pass;
+}
+/*-----------------------------------------------------------------------------
+ *
+ *  This function initializes variables for optimized training.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemTInitializeVariablesOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 ByteLane;
+  for (ByteLane = 0; ByteLane < MAX_BYTELANES_PER_CHANNEL; ByteLane++) {
+    TechPtr->RcvrEnDlyLimitOpt[ByteLane] = FILTER_MAX_REC_EN_DLY_VALUE;      // @attention - limit depends on proc type
+    TechPtr->DqsRcvEnSavedOpt[ByteLane] = FALSE;
+    TechPtr->RcvrEnDlyOpt[ByteLane] = FILTER_NEW_RECEIVER_START_VALUE;
+    TechPtr->GetFirstPassValOpt[ByteLane] = FALSE;
+    TechPtr->DqsRcvEnFirstPassValOpt[ByteLane] = 0;
+    TechPtr->RevertPassValOpt[ByteLane] = FALSE;
+    TechPtr->MaxRcvrEnDlyBlOpt[ByteLane] = 0;
+    TechPtr->FilterStatusOpt[ByteLane] = START_FILTER;
+    TechPtr->FilterCountOpt = 0;
+    TechPtr->FilterSidePassCountOpt[ByteLane] = 0;
+    TechPtr->IncBy1ForNextCountOpt[ByteLane] = FALSE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function loads the DqsRcvEnDly from saved data and program to additional index
+ *  for optimized DQS receiver enabled training
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver  - Current Chip select value
+ *
+ */
+
+VOID
+STATIC
+MemTLoadRcvrEnDlyOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver
+  )
+{
+  UINT8 i;
+  UINT8 Dimm;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  Dimm = Receiver >> 1;
+  for (i = 0; i < 8; i++) {
+    if (TechPtr->DqsRcvEnSavedOpt[i]) {
+      TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver >> 1, i),
+      ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + i]);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function programs DqsRcvEnDly to additional index for DQS receiver enabled training
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver  - Current Chip select value
+ *     @param[in]       RcvEnDly  - receiver enable delay to be saved
+ */
+
+VOID
+STATIC
+MemTSetRcvrEnDlyOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly
+  )
+{
+  UINT8 ByteLane;
+
+  ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    if (TechPtr->FilterStatusOpt[ByteLane] != DONE_FILTER) {
+      TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver >> 1, ByteLane), TechPtr->RcvrEnDlyOpt[ByteLane]);
+    }
+  }
+}
+/*-----------------------------------------------------------------------------
+ *
+ *  This sets any Errors generated from Dly sweep
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]   DCT   - current DCT
+ *     @param[in]   Receiver   - current receiver
+ *
+ *     @return     FALSE - Fatal error occurs.
+ *     @return     TRUE  - No fatal error occurs.
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemTSetSweepErrorOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT8 Dct,
+  IN       BOOLEAN ErrorCheck
+  )
+{
+  UINT8 ByteLane;
+  MEM_DATA_STRUCT *MemPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  for (ByteLane = 0; ByteLane < MAX_BYTELANES_PER_CHANNEL; ByteLane++) {
+    if (TechPtr->RcvrEnDlyOpt[ByteLane] == TechPtr->RcvrEnDlyLimitOpt[ByteLane]) {
+      // no passing window
+      if (ErrorCheck) {
+        return FALSE;
+      }
+      PutEventLog (AGESA_ERROR, MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, ByteLane, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_ERROR, MCTPtr);
+    }
+    if (TechPtr->RcvrEnDlyOpt[ByteLane] > (TechPtr->RcvrEnDlyLimitOpt[ByteLane] - 1)) {
+      // passing window too narrow, too far delayed
+      if (ErrorCheck) {
+        return FALSE;
+      }
+      PutEventLog (AGESA_ERROR, MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, ByteLane, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_ERROR, MCTPtr);
+      DCTPtr->Timings.CsTrainFail |= (UINT16) (3 << Receiver) & DCTPtr->Timings.CsPresent;
+      MCTPtr->ChannelTrainFail |= (UINT32)1 << Dct;
+      if (!NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, DCTPtr->Timings.CsTrainFail, &MemPtr->StdHeader)) {
+        ASSERT (FALSE);
+        return FALSE;
+      }
+    }
+  }
+  return TRUE;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *  This function determines the maximum receiver delay value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @retval  MaxRcvrValue - Maximum receiver delay value for all bytelanes
+ * ----------------------------------------------------------------------------
+ */
+
+UINT16
+MemTGetMaxValueOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 ByteLane;
+  UINT16 MaxRcvrValue;
+  MaxRcvrValue = 0;
+  for (ByteLane = 0; ByteLane < MAX_BYTELANES_PER_CHANNEL; ByteLane++) {
+    if (TechPtr->MaxRcvrEnDlyBlOpt[ByteLane] > MaxRcvrValue) {
+      MaxRcvrValue = TechPtr->MaxRcvrEnDlyBlOpt[ByteLane];
+    }
+  }
+  MaxRcvrValue += FILTER_OFFSET_VALUE;
+  return MaxRcvrValue;
+}
+/*-----------------------------------------------------------------------------
+ *
+ *  This function determines if the sweep loop should complete.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @retval  TRUE - All bytelanes pass
+ *              FALSE - Some bytelanes fail
+ * ----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemTCheckRcvrEnDlyLimitOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  if (TechPtr->FilterCountOpt >= (UINT16)MAX_CS_PER_CHANNEL) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function load the result of write levelization training into RcvrEnDlyOpt,
+ *  using it as the initial value for Receiver DQS training.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver  - Current Chip select value
+ */
+VOID
+STATIC
+MemTLoadInitialRcvEnDlyOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver
+  )
+{
+  UINT8 ByteLane;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  for (ByteLane = 0; ByteLane < MAX_BYTELANES_PER_CHANNEL; ByteLane++) {
+    TechPtr->RcvrEnDlyOpt[ByteLane] = NBPtr->ChannelPtr->WrDqsDlys[((Receiver >> 1) * TechPtr->DlyTableWidth ()) + ByteLane];
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttecc.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttecc.c
new file mode 100644
index 0000000000..a85c76a635
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttecc.c
@@ -0,0 +1,226 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttecc.c
+ *
+ * Technology ECC byte support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_MTTECC_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemTCalcDQSEccTmg (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Type,
+  IN OUT   VOID  *DlyArray
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the DQS ECC timings
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTSetDQSEccTmgs (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 Dimm;
+  UINT8 i;
+
+  MEM_NB_BLOCK *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  if (NBPtr->MCTPtr->NodeMemSize) {
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        ChannelPtr = NBPtr->ChannelPtr;
+        for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+          if (NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16)1 << (Dimm * 2))) {
+            i = Dimm * TechPtr->DlyTableWidth ();
+            MemTCalcDQSEccTmg (TechPtr, Dimm, AccessRcvEnDly, &ChannelPtr->RcvEnDlys[i]);
+            MemTCalcDQSEccTmg (TechPtr, Dimm, AccessRdDqsDly, &ChannelPtr->RdDqsDlys[i]);
+            MemTCalcDQSEccTmg (TechPtr, Dimm, AccessWrDatDly, &ChannelPtr->WrDatDlys[i]);
+          }
+        }
+      }
+    }
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the DQS ECC timings
+ *
+ *     @param[in,out]   *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Dimm - Dimm number
+ *     @param[in]       Type - Type of DQS timing
+ *     @param[in,out]   *DlyArray - Pointer to the array of delays per this Dimm
+ *
+ */
+
+VOID
+STATIC
+MemTCalcDQSEccTmg (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Type,
+  IN OUT   VOID  *DlyArray
+  )
+{
+  UINT8 i;
+  UINT8 j;
+  UINT8 Scale;
+  UINT8 EccByte;
+  UINT16 ByteiDly;
+  UINT16 BytejDly;
+  UINT16 EccDly;
+  UINT8 *WrDqsDly;
+  MEM_NB_BLOCK *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  ChannelPtr = NBPtr->ChannelPtr;
+
+  EccByte = TechPtr->MaxByteLanes ();
+  i = (UINT8) (ChannelPtr->DctEccDqsLike & 0xFF);
+  j = (UINT8) (ChannelPtr->DctEccDqsLike >> 8);
+  Scale = ChannelPtr->DctEccDqsScale;
+  WrDqsDly = &ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth ()];
+
+  if (Type == AccessRcvEnDly) {
+    ByteiDly = ((UINT16 *) DlyArray)[i];
+    BytejDly = ((UINT16 *) DlyArray)[j];
+  } else {
+    ByteiDly = ((UINT8 *) DlyArray)[i];
+    BytejDly = ((UINT8 *) DlyArray)[j];
+  }
+
+  //
+  // For WrDatDly, Subtract TxDqs Delay to get
+  //  TxDq-TxDqs Delta, which is what should be averaged.
+  //
+  if (Type == AccessWrDatDly) {
+    ByteiDly = ByteiDly - WrDqsDly[i];
+    BytejDly = BytejDly - WrDqsDly[j];
+  }
+
+  if (BytejDly > ByteiDly) {
+    EccDly = ByteiDly + (UINT8) (((UINT16) (BytejDly - ByteiDly) * Scale + 0x77) / 0xFF);
+    //                                                            Round up --^
+  } else {
+    EccDly = BytejDly + (UINT8) (((UINT16) (ByteiDly - BytejDly) * (0xFF - Scale) + 0x77) / 0xFF);
+    //                                                                     Round up --^
+  }
+
+  if (Type == AccessRcvEnDly) {
+    ((UINT16 *) DlyArray)[EccByte] = EccDly;
+  } else {
+    ((UINT8 *) DlyArray)[EccByte] = (UINT8) EccDly;
+  }
+
+  //
+  // For WrDatDly, Add back the TxDqs value for ECC bytelane
+  //
+  if (Type == AccessWrDatDly) {
+    EccDly = EccDly + WrDqsDly[EccByte];
+  }
+
+  NBPtr->SetTrainDly (NBPtr, Type, DIMM_BYTE_ACCESS (Dimm, EccByte), EccDly);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mtthrc.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mtthrc.c
new file mode 100644
index 0000000000..512c4b592a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mtthrc.c
@@ -0,0 +1,311 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtthrc.c
+ *
+ * Phy assisted DQS receiver enable training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_MTTHRC_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define TpProcMemRcvrSetSeed TpProcMemRcvrSetDelay
+#define TpProcMemRcvrInitPRE TpProcMemRcvrStartSweep
+#define TpProcMemRcvrBackToBackRead TpProcMemRcvrTestPattern
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemTProgramRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel,
+  IN       UINT8 Pass
+  );
+
+BOOLEAN
+STATIC
+MemTDqsTrainRcvrEnHw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Pass
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern UINT16 T1minToFreq[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes first pass of Phy assisted receiver enable training
+ *      for current node at DDR800 and below.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @pre   Auto refresh and ZQCL must be disabled
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemTDqsTrainRcvrEnHwPass1 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  return MemTDqsTrainRcvrEnHw (TechPtr, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes second pass of Phy assisted receiver enable training
+ *      for current node at DDR1066 and above.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @pre   Auto refresh and ZQCL must be disabled
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemTDqsTrainRcvrEnHwPass2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  // If current speed is higher than start-up speed, do second pass of WL
+  if (TechPtr->NBPtr->DCTPtr->Timings.Speed > TechPtr->NBPtr->StartupSpeed) {
+    return MemTDqsTrainRcvrEnHw (TechPtr, 2);
+  }
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes Phy assisted receiver enable training for current node.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]  Pass - Pass of the receiver training
+ *
+ *     @pre   Auto refresh and ZQCL must be disabled
+ *
+ */
+BOOLEAN
+STATIC
+MemTDqsTrainRcvrEnHw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Pass
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  UINT32 TestAddrRJ16;
+  UINT8  Dct;
+  UINT8  ChipSel;
+  NBPtr = TechPtr->NBPtr;
+
+  TechPtr->TrainingType = TRN_RCVR_ENABLE;
+
+  AGESA_TESTPOINT (TpProcMemReceiverEnableTraining , &(NBPtr->MemPtr->StdHeader));
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart HW RxEn training\n");
+
+  // Set environment settings before training
+  MemTBeginTraining (TechPtr);
+  //
+  // Setup hardware training engine (if applicable)
+  //
+  NBPtr->FamilySpecificHook[SetupHwTrainingEngine] (NBPtr, &TechPtr->TrainingType);
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    //training for each rank
+    for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; (NBPtr->MCTPtr->Status[SbLrdimms])? ChipSel += 2: ChipSel++) {
+      if (NBPtr->GetSysAddr (NBPtr, ChipSel, &TestAddrRJ16)) {
+        if (!(NBPtr->MCTPtr->Status[SbLrdimms]) || ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0)) {
+          // 1.Prepare the DIMMs for training
+          NBPtr->SetBitField (NBPtr, BFTrDimmSel, ChipSel >> 1);
+
+          TechPtr->ChipSel = ChipSel;
+          TechPtr->Pass = Pass;
+          NBPtr->FamilySpecificHook[InitPerNibbleTrn] (NBPtr, NULL);
+          for (TechPtr->TrnNibble = NIBBLE_0; TechPtr->TrnNibble <= (NBPtr->FamilySpecificHook[TrainRxEnPerNibble] (NBPtr, &ChipSel)? NIBBLE_0 : NIBBLE_1); TechPtr->TrnNibble++) {
+            // 2.Prepare the phy for DQS receiver enable training.
+            IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+            IDS_HDT_CONSOLE (MEM_FLOW, "\t\tTestAddr %x0000\n", TestAddrRJ16);
+            IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t     Byte:  00  01  02  03  04  05  06  07  ECC\n");
+
+            AGESA_TESTPOINT (TpProcMemRcvrSetSeed, &(NBPtr->MemPtr->StdHeader));
+            NBPtr->MemNPrepareRcvrEnDlySeed (NBPtr);
+
+            AGESA_TESTPOINT (TpProcMemRcvrInitPRE, &(NBPtr->MemPtr->StdHeader));
+            // 3.BIOS initiates the phy assisted receiver enable training
+            NBPtr->SetBitField (NBPtr, BFDqsRcvTrEn, 1);
+
+            // 4.BIOS begins sending out of back-to-back reads to create
+            //   a continuous stream of DQS edges on the DDR interface
+            AGESA_TESTPOINT (TpProcMemRcvrBackToBackRead, &(NBPtr->MemPtr->StdHeader));
+            NBPtr->GenHwRcvEnReads (NBPtr, TestAddrRJ16);
+
+            // 7.Program [DqsRcvTrEn]=0 to stop the DQS receive enable training.
+            NBPtr->SetBitField (NBPtr, BFDqsRcvTrEn, 0);
+
+            // 8.Get the gross and fine delay values.
+            // 9.Calculate the corresponding final delay values
+            MemTProgramRcvrEnDly (TechPtr, ChipSel, Pass);
+          }
+        }
+      }
+    }
+  }
+  // Restore environment settings after training
+  MemTEndTraining (TechPtr);
+  IDS_HDT_CONSOLE (MEM_FLOW, "End HW RxEn training\n\n");
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function calculates final RcvrEnDly for each rank
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]  ChipSel - Rank to be trained
+ *     @param[in]  Pass - Pass of the receiver training
+ *
+ */
+VOID
+STATIC
+MemTProgramRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel,
+  IN       UINT8 Pass
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT8  ByteLane;
+  UINT16 RcvEnDly;
+  UINT16 CsPairRcvEnDly;
+  UINT16 RankRcvEnDly[9];
+  NBPtr = TechPtr->NBPtr;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t      PRE: ");
+  for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8) ; ByteLane++) {
+    RcvEnDly = (UINT8) NBPtr->GetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (ChipSel >> 1, ByteLane));
+    IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RcvEnDly);
+
+    RcvEnDly = RcvEnDly + TechPtr->DiffSeedGrossSeedPreGross[ByteLane];
+
+    // Add 1 UI to get to the midpoint of preamble
+    RcvEnDly += 0x20;
+    TechPtr->Bytelane = ByteLane;
+    RankRcvEnDly[ByteLane] = RcvEnDly;
+    if (NBPtr->FamilySpecificHook[TrainRxEnAdjustDlyPerNibble] (NBPtr, &RcvEnDly)) {
+      if ((ChipSel & 1) == 1) {
+        // For each rank pair on a dual-rank DIMM, compute the average value of the total delays saved during the
+        //  training of each rank and program the result in D18F2x[1,0]9C_x0000_00[24:10][DqsRcvEnGrossDelay,
+        //  DqsRcvEnFineDelay].
+        CsPairRcvEnDly = ChannelPtr->RcvEnDlys[(ChipSel >> 1) * TechPtr->DlyTableWidth () + ByteLane];
+        RcvEnDly = (CsPairRcvEnDly + RcvEnDly + 1) / 2;
+      }
+    }
+    ChannelPtr->RcvEnDlys[(ChipSel >> 1) * TechPtr->DlyTableWidth () + ByteLane] = RcvEnDly;
+    NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS ((ChipSel >> 1), ByteLane), RcvEnDly);
+  }
+
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t     RxEn: ");
+    for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RankRcvEnDly[ByteLane]);
+    }
+    if (NBPtr->FamilySpecificHook[TrainRxEnGetAvgDlyPerNibble] (NBPtr, NULL)) {
+      if ((ChipSel & 1) == 1) {
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t      Avg: ");
+        for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", ChannelPtr->RcvEnDlys[(ChipSel >> 1) * TechPtr->DlyTableWidth () + ByteLane]);
+        }
+      }
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+  );
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mtthrcSeedTrain.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mtthrcSeedTrain.c
new file mode 100644
index 0000000000..044e0bf3dd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mtthrcSeedTrain.c
@@ -0,0 +1,624 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtthrcSt.c
+ *
+ * Phy assisted DQS receiver enable seedless training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 42643 $ @e \$Date: 2010-11-24 13:51:41 -0600 (Wed, 24 Nov 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mttEdgeDetect.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_MTTHRCSEEDTRAIN_FILECODE
+/*----------------------------------------------------------------------------
+3 *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemTRdPosRxEnSeedSetDly3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT16 RcvEnDly,
+  IN OUT   UINT8 ByteLane
+  );
+
+VOID
+STATIC
+MemTRdPosRxEnSeedCheckRxEndly3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function checks each bytelane for no window error.
+ *
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemTTrackRxEnSeedlessRdWrNoWindBLError (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 i;
+  SWEEP_INFO SweepData;
+  SweepData = *(SWEEP_INFO*)OptParam;
+  for (i = 0; i < ((TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] && TechPtr->NBPtr->IsSupported[EccByteTraining]) ? 9 : 8) ; i++) {
+    //
+    /// Skip Bytelanes that have already reached the desired result
+    //
+    if ((SweepData.ResultFound & ((UINT16)1 << i)) == 0) {
+      if (SweepData.TrnDelays[i] == SweepData.EndDelay) {
+        if ((SweepData.EndResult & ((UINT16) (1 << i))) != 0) {
+          TechPtr->ByteLaneError[i] = TRUE;
+        } else {
+          TechPtr->ByteLaneError[i] = FALSE;
+        }
+      }
+    }
+  }
+  return TRUE;
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *      This function checks each bytelane for small window error.
+ *
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   OptParam   - Optional parameter(Unused)
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemTTrackRxEnSeedlessRdWrSmallWindBLError (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+    TechPtr->ByteLaneError[TechPtr->Bytelane] = TRUE;
+  return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function sets the RxEn delay
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out]   *RcvEnDly   - Receiver Enable Delay
+ *     @param[in,out]   *ByteLane   - Bytelane
+ *
+*/
+VOID
+STATIC
+MemTRdPosRxEnSeedSetDly3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT16 RcvEnDly,
+  IN OUT   UINT8 ByteLane
+  )
+{
+  TechPtr->NBPtr->ChannelPtr->RcvEnDlys[(TechPtr->ChipSel >> 1) * TechPtr->DlyTableWidth () + ByteLane] = RcvEnDly;
+  TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS ((TechPtr->ChipSel >> 1), ByteLane), RcvEnDly);
+  TechPtr->NBPtr->FamilySpecificHook[ResetRxFifoPtr] (TechPtr->NBPtr, TechPtr->NBPtr);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function determines if the currert RxEn delay settings have failed
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+*/
+VOID
+STATIC
+MemTRdPosRxEnSeedCheckRxEndly3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8  MaxDlyDimm;
+  TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &MaxDlyDimm);
+  TechPtr->NBPtr->SetMaxLatency (TechPtr->NBPtr, TechPtr->MaxDlyForMaxRdLat);
+  TechPtr->DqsRdWrPosSaved = 0;
+  MemTTrainDQSEdgeDetect (TechPtr);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function executes RdDQS training and if fails adjusts the RxEn Gross results for
+ *     each bytelane
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - All bytelanes pass
+ *     @return  FALSE - Some bytelanes fail
+*/
+BOOLEAN
+MemTRdPosWithRxEnDlySeeds3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8  ByteLane;
+  UINT16 PassTestRxEnDly[MAX_BYTELANES_PER_CHANNEL + 1];
+  UINT16 FailTestRxEnDly[MAX_BYTELANES_PER_CHANNEL + 1];
+  UINT16 FinalRxEnCycle[MAX_BYTELANES_PER_CHANNEL + 1];
+  UINT16 RxOrig[MAX_BYTELANES_PER_CHANNEL];
+  UINT8  i;
+  UINT8  j;
+  UINT8  NumBLWithTargetFound;
+  UINT8  MaxByteLanes;
+  INT16  RxEn;
+  BOOLEAN status;
+  BOOLEAN EsbNoDqsPosSave;
+  BOOLEAN OutOfRange[MAX_BYTELANES_PER_CHANNEL];
+  BOOLEAN ByteLanePass[MAX_BYTELANES_PER_CHANNEL];
+  BOOLEAN ByteLaneFail[MAX_BYTELANES_PER_CHANNEL];
+  BOOLEAN RxEnMemClkTested[MAX_BYTELANES_PER_CHANNEL][MAX_POS_RX_EN_SEED_GROSS_RANGE];
+  BOOLEAN RxEnMemClkSt[MAX_BYTELANES_PER_CHANNEL][MAX_POS_RX_EN_SEED_GROSS_RANGE];
+  BOOLEAN RxEnDlyTargetFound[MAX_BYTELANES_PER_CHANNEL];
+  BOOLEAN DlyWrittenToReg[MAX_BYTELANES_PER_CHANNEL];
+  UINT16 RxEnDlyTargetValue[MAX_BYTELANES_PER_CHANNEL];
+  UINT8 AllByteLanesOutOfRange;
+  UINT8 AllByteLanesSaved;
+  UINT8 TotalByteLanesCheckedForSaved;
+  UINT8  MemClkCycle;
+  MEM_NB_BLOCK  *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  NBPtr = TechPtr->NBPtr;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+  NumBLWithTargetFound = 0;
+  status = FALSE;
+  EsbNoDqsPosSave = TechPtr->NBPtr->MCTPtr->ErrStatus[EsbNoDqsPos];
+  NBPtr->RdDqsDlyRetrnStat = RDDQSDLY_RTN_SUSPEND;
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\nStart HW RxEn Seedless training\n\n");
+  // 1. Program D18F2x9C_x0D0F_0[F,8:0]30_dct[1:0][BlockRxDqsLock] = 1.
+  NBPtr->SetBitField (NBPtr, BFBlockRxDqsLock, 0x0100);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tChip Select: %02x \n", TechPtr->ChipSel);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t       Byte:  00  01  02  03  04  05  06  07  ECC\n");
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tRxEn Orig: ");
+  //
+  // Start sweep loops for RxEn Seedless Training
+  //
+  MaxByteLanes = (TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] && TechPtr->NBPtr->IsSupported[EccByteTraining]) ? 9 : 8;    //dmach
+  //
+  //Initialialize BL variables
+  //
+  for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+    OutOfRange[ByteLane] = FALSE;
+    ByteLanePass[ByteLane] = FALSE;
+    ByteLaneFail[ByteLane] = FALSE;
+    // 2. RxEnOrig = D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] result
+    //    from 2.10.6.8.2 [Phy Assisted DQS Receiver Enable Training]
+    RxOrig[ByteLane] = TechPtr->RxOrig[ByteLane]; // Original RxEn Dly based on PRE results
+    RxEnDlyTargetFound[ByteLane] = FALSE;
+    RxEnDlyTargetValue[ByteLane] = 0;
+    IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RxOrig[ByteLane]);
+    for (i = 0; i < MAX_POS_RX_EN_SEED_GROSS_RANGE; i++) {
+      RxEnMemClkTested[ByteLane][i] = FALSE;
+    }
+  }
+  // Start MemClk delay sweep
+  for (i = 0; i < MAX_POS_RX_EN_SEED_GROSS_RANGE; i++) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\ti: %02x\n", i);
+    // Start direction sweep (0, - Positive, 1 - negative)
+    for (j = 0; j < MAX_POS_RX_EN_SEED_GROSS_DIR; j++) {
+      // Edge detect may run twice to see Pass to fail transition
+      // It is not run if the value are already saved
+      // Fail test is only done if pass is found
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tj: %02x\n", j);
+      // Reset Bytelane Flags for next sweep
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        ByteLaneFail[ByteLane] = FALSE;
+        ByteLanePass[ByteLane] = FALSE;
+        OutOfRange[ByteLane] = FALSE;
+      }
+      if (i == 0 && j == 1) {
+        continue; // Since i & j are the same skip
+      }
+      IDS_HDT_CONSOLE_DEBUG_CODE (
+        IDS_HDT_CONSOLE (MEM_FLOW, "\t             Byte:  00  01  02  03  04  05  06  07  ECC\n");
+        IDS_HDT_CONSOLE (MEM_FLOW, "\t  Target BL Found: ");
+        for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+         IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", ((RxEnDlyTargetFound[ByteLane] == TRUE) ? 'Y' : 'N'));
+        }
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n\t  Target BL Value: ");
+        for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RxEnDlyTargetValue[ByteLane]);
+        }
+      );
+      //
+      //  Find the RxEn Delay for the Pass condition in the Pass to Fail transition
+      //              "PassTestRxEnDly"
+      //
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t Setting PassTestRxEnDly\n");
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t  PassTestRxEnDly: ");
+      PassTestRxEnDly[ByteLane] = RxOrig[ByteLane];
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+          // Calculate "PassTestRxEnDly" from  current "RxEnDly"
+          // 3. RxEnOffset = MOD(RxEnOrig + 0x10, 0x40)
+          RxEn = (j == 0) ? ((INT16)RxOrig[ByteLane] + 0x10 + (0x40*i)) : ((INT16)RxOrig[ByteLane] + 0x10 - (0x40*i));
+          // Check if RxEnDly is in a valid range
+          if ((RxEn >= NBPtr->MinRxEnSeedGross) && (RxEn <= NBPtr->MaxRxEnSeedTotal)) {
+            PassTestRxEnDly[ByteLane] = (UINT16)RxEn;
+            // 4. For each DqsRcvEn value beginning from RxEnOffset incrementing by 1 MEMCLK:
+            //    A. Program D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] with
+            //    the current value.
+            MemTRdPosRxEnSeedSetDly3 (TechPtr, PassTestRxEnDly[ByteLane], ByteLane);
+            OutOfRange[ByteLane] = FALSE;
+          } else {
+            OutOfRange[ByteLane] = TRUE;
+          }
+        } else {
+          PassTestRxEnDly[ByteLane] = RxEnDlyTargetValue[ByteLane];
+        }
+        IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", PassTestRxEnDly[ByteLane]);
+      }
+      // Check if all BLs out of Range at "PassTestRxEnDly"
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n\t       OutOfRange: ");
+      AllByteLanesOutOfRange = 0;
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        if (OutOfRange[ByteLane]) {
+          AllByteLanesOutOfRange++;
+        }
+        IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", (OutOfRange[ByteLane] == TRUE) ? 'Y' : 'N');
+      }
+      if (AllByteLanesOutOfRange == MaxByteLanes) {
+        continue;  // All BLs out of range, so skip
+      }
+      // Check if all BLs saved Results  at "PassTestRxEnDly"
+      AllByteLanesSaved = 0;
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5);
+        if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+          if (!RxEnMemClkTested[ByteLane][MemClkCycle]) {
+            AllByteLanesSaved++;
+          }
+        }
+      }
+      // Check if "RxEnDlyValueForPassCond" passed
+      if (AllByteLanesSaved != 0) {
+        // At least one BL has not been saved, so check if "PassTestRxEnDly" passed
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t Checking if PassTestRxEnDly Passes?\n\n");
+        // 4B. Perform 2.10.6.8.5 [DQS Position Training].
+        //     Record the result for the current DqsRcvEn setting as a pass or fail depending if a data eye is found.
+        MemTRdPosRxEnSeedCheckRxEndly3 (TechPtr);
+        IDS_HDT_CONSOLE_DEBUG_CODE (
+          IDS_HDT_CONSOLE (MEM_FLOW, "\n\t             Byte:  00  01  02  03  04  05  06  07  ECC\n");
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t\t     Err Status: ");
+          for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+            IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", (TechPtr->ByteLaneError[ByteLane] == TRUE) ? 'F' : 'P');
+          }
+        );
+      } else {
+        // All BLs saved, so use saved results for "PassTestRxEnDly"
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tAll BLs Saved at PassTestRxEnDly\n");
+        IDS_HDT_CONSOLE_DEBUG_CODE (
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t             Byte:  00  01  02  03  04  05  06  07  ECC\n");
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t    Save Err Stat: ");
+          for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+            MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5);
+            IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", ((RxEnMemClkSt[ByteLane][MemClkCycle] == TRUE) ? 'F' : 'P'));
+          }
+        );
+      }
+      // Update Saved values for "PassTestRxEnDly"
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+          if (OutOfRange[ByteLane] == FALSE) {
+            MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5);
+            if (!RxEnMemClkTested[ByteLane][MemClkCycle]) {
+              RxEnMemClkTested[ByteLane][MemClkCycle] = TRUE;
+              RxEnMemClkSt[ByteLane][MemClkCycle] = TechPtr->ByteLaneError[ByteLane];
+            }
+          }
+        }
+      }
+      //
+      //  Find the RxEn Delay for the Fail condition in the Pass to Fail transition
+      //              "FailTestRxEnDly"
+      //
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        DlyWrittenToReg[ByteLane] = FALSE;
+      }
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        FailTestRxEnDly[ByteLane] = PassTestRxEnDly[ByteLane] + 0x40;
+      }
+      IDS_HDT_CONSOLE_DEBUG_CODE (
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n\t             Byte:  00  01  02  03  04  05  06  07  ECC\n");
+        IDS_HDT_CONSOLE (MEM_FLOW, "\t  FailTestRxEnDly: ");
+        for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", FailTestRxEnDly[ByteLane]);
+        }
+      );
+      // Check if all BLs Saved Results at FailTestRxEnDly
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tSetting FailTestRxEnDly");
+      AllByteLanesSaved = 0;
+      TotalByteLanesCheckedForSaved = 0;
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+          MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5);
+          // Check if RxEnDly + 40 is valid
+          if ((FailTestRxEnDly[ByteLane] >= NBPtr->MinRxEnSeedGross) && (FailTestRxEnDly[ByteLane] <= NBPtr->MaxRxEnSeedTotal)) {
+            if (RxEnMemClkTested[ByteLane][MemClkCycle]) {
+              AllByteLanesSaved++;
+            }
+            OutOfRange[ByteLane] = FALSE;
+          } else {
+            OutOfRange[ByteLane] = TRUE;
+          }
+          TotalByteLanesCheckedForSaved++;
+        }
+      }
+      // Check if all BLs out of Range condition at FailTestRxEnDly
+      AllByteLanesOutOfRange = 0;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n\t       OutOfRange: ");
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        if (OutOfRange[ByteLane]) {
+          AllByteLanesOutOfRange++;
+        }
+        IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", (OutOfRange[ByteLane] == TRUE) ? 'Y' : 'N');
+      }
+      if (AllByteLanesOutOfRange == MaxByteLanes) {
+        continue;  // All BLs out of range, so skip
+      }
+      // Setting FailTestRxEnDly for any BL that was not saved
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n\t  FailTestRxEnDly: ");
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+          MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5);
+          // Check if New RxEnDly has Passed
+          if ((RxEnMemClkTested[ByteLane][MemClkCycle] ? RxEnMemClkSt[ByteLane][MemClkCycle] : TechPtr->ByteLaneError[ByteLane]) == FALSE) {
+            if (OutOfRange[ByteLane] == FALSE) {
+              // BL has passed at "New RxEnDly", so check if "New RxEnDly" + 0x40 fails
+              MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5);
+              if (!RxEnMemClkTested[ByteLane][MemClkCycle]) {
+                // Only Set Delays for ByteLanes that have not been already tested
+                MemTRdPosRxEnSeedSetDly3 (TechPtr, FailTestRxEnDly[ByteLane], ByteLane);
+                DlyWrittenToReg[ByteLane] = TRUE;
+                IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", 'Y');
+              } else {
+                IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", 'N');
+              }
+              ByteLanePass[ByteLane] = TRUE;
+            } else {
+              IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", 'O');
+            }
+          } else {
+            IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", 'F');
+          }
+        } else {
+          IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", 'N');
+        }
+      }
+      // Check if BLs that passed at PassTestRxEnDly fail at FailTestRxEnDly
+      if (AllByteLanesSaved != TotalByteLanesCheckedForSaved) {
+          // At least one BL has not been saved, so check if FailTestRxEnDly passed
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n\n\t\t Checking if FailTestRxEnDly Fails?\n");
+        MemTRdPosRxEnSeedCheckRxEndly3 (TechPtr);
+        IDS_HDT_CONSOLE_DEBUG_CODE (
+          IDS_HDT_CONSOLE (MEM_FLOW, "\n\t         Byte:  00  01  02  03  04  05  06  07  ECC\n");
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t     Err Status: ");
+          for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+            IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", (TechPtr->ByteLaneError[ByteLane] == TRUE) ? 'F' : 'P');
+          }
+        );
+      } else {
+        // All BLs saved, so use saved results for FailTestRxEnDly
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tAll BLs Saved at PassTestRxEnDly\n");
+        IDS_HDT_CONSOLE_DEBUG_CODE (
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t               Byte:  00  01  02  03  04  05  06  07  ECC\n");
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t      Save Err Stat: ");
+          for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+            MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5);
+            IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", (RxEnMemClkSt[ByteLane][MemClkCycle] == TRUE) ? 'F' : 'P');
+          }
+        );
+      }
+      //
+      //  If BL failes at "FailTestRxEnDly" set FinalRxEnCycle
+      //
+      // Setting FinalRxEnCycle for any BL that Failed at FailTestRxEnDly
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n   Set FinalRxEnCycle: ");
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+          MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5);
+          if (RxEnMemClkTested[ByteLane][MemClkCycle] ? RxEnMemClkSt[ByteLane][MemClkCycle] == TRUE : (TechPtr->ByteLaneError[ByteLane] && DlyWrittenToReg[ByteLane])) {
+            FinalRxEnCycle[ByteLane] = PassTestRxEnDly[ByteLane] - 0x10;
+            if (((UINT16) FinalRxEnCycle[ByteLane] >= NBPtr->MinRxEnSeedGross) && ((UINT16) FinalRxEnCycle[ByteLane] <= NBPtr->MaxRxEnSeedTotal)) {
+              // Since FailTestRxEnDly, we can set FinalRxEnCycle
+              MemTRdPosRxEnSeedSetDly3 (TechPtr, (UINT16) FinalRxEnCycle[ByteLane], ByteLane);
+              ByteLaneFail[ByteLane] = TRUE;
+              OutOfRange[ByteLane] = FALSE;
+              IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", 'Y');
+            } else {
+              OutOfRange[ByteLane] = TRUE;
+              IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", 'N');
+            }
+          } else {
+            IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", 'F');
+            OutOfRange[ByteLane] = FALSE;
+          }
+        } else {
+          IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", 'Y');
+        }
+      }
+      // Update Saved values for FailTestRxEnDly
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+          if (OutOfRange[ByteLane] == FALSE) {
+            MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5);
+            if (!RxEnMemClkTested[ByteLane][MemClkCycle] && DlyWrittenToReg[ByteLane]) {
+              RxEnMemClkTested[ByteLane][MemClkCycle] = TRUE;
+              RxEnMemClkSt[ByteLane][MemClkCycle] = TechPtr->ByteLaneError[ByteLane];
+            }
+          }
+        }
+      }
+      // Check for out of Range condition
+      AllByteLanesOutOfRange = 0;
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n\t       OutOfRange: ");
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        if (OutOfRange[ByteLane]) {
+          AllByteLanesOutOfRange++;
+        }
+        IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", (OutOfRange[ByteLane] == TRUE) ? 'Y' : 'N');
+      }
+      if (AllByteLanesOutOfRange == MaxByteLanes) {
+        continue; // All BLs out of range so skip
+      }
+      IDS_HDT_CONSOLE_DEBUG_CODE (
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n     FinalRxEnCycle: ");
+        for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+          IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", (UINT16) FinalRxEnCycle[ByteLane]);
+        }
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n       ByteLaneFail: ");
+        for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+          IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", (ByteLaneFail[ByteLane] == TRUE) ? 'Y' : 'N');
+        }
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n       ByteLanePass: ");
+        for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+          IDS_HDT_CONSOLE (MEM_FLOW, " %c  ", (ByteLanePass[ByteLane] == TRUE) ? 'Y' : 'N');
+        }
+      );
+      //
+      // Check for exit condition
+      // PassTestRxEnDly = Pass and FailTestRxEnDly[ByteLane] = Fail
+      // If found, use "FinalRxEnCycle" as final RxEnDly value
+      //
+      // 5. Process the array of results and determine a pass-to-fail transition.
+      NumBLWithTargetFound = 0;
+      for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+        if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+          // Check if the current BL has found its target
+          if (ByteLanePass[ByteLane] == TRUE && ByteLaneFail[ByteLane] == TRUE) {
+            RxEnDlyTargetFound[ByteLane] = TRUE;
+            NumBLWithTargetFound++;
+            RxEnDlyTargetValue[ByteLane] = FinalRxEnCycle[ByteLane];
+          } else {
+            RxEnDlyTargetFound[ByteLane] = FALSE;
+          }
+        } else {
+          // BL has already failed and passed, so increment both flags
+          NumBLWithTargetFound++;
+        }
+      }
+      IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+      // Check for exit condition
+      if (NumBLWithTargetFound == MaxByteLanes) {
+        // Exit condition found, so setting new RDQS based on RxEn-0x10 \n\n
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Setting new RDQS based on FinalRxEnCycle \n\n");
+        // 5 A. DqsRcvEnCycle = the total delay value of the pass result.
+        //   B. Program D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] =
+        //   DqsRcvEnCycle - 0x10.
+        NBPtr->RdDqsDlyRetrnStat = RDDQSDLY_RTN_NEEDED;
+        MemTRdPosRxEnSeedCheckRxEndly3 (TechPtr);
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+        status = TRUE;
+        break;
+      } else {
+        status = FALSE;
+      }
+    }
+    // Check for exit condition
+    if (NumBLWithTargetFound == MaxByteLanes) {
+      status = TRUE;
+      break;
+    } else {
+      status = FALSE;
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+  }
+  TechPtr->NBPtr->MCTPtr->ErrStatus[EsbNoDqsPos] = EsbNoDqsPosSave;
+  if (i == MAX_POS_RX_EN_SEED_GROSS_RANGE) {
+    TechPtr->NBPtr->MCTPtr->ErrStatus[EsbNoDqsPos] = TRUE;
+  }
+
+  // 6. Program D18F2x9C_x0D0F_0[F,8:0]30_dct[1:0][BlockRxDqsLock] = 0.
+  NBPtr->SetBitField (NBPtr, BFBlockRxDqsLock, 0);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd HW RxEn Seedless training\n\n");
+  return status;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttml.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttml.c
new file mode 100644
index 0000000000..4b16faa478
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttml.c
@@ -0,0 +1,259 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttml.c
+ *
+ * Technology Max Latency Training support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_MTTML_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function trains Max latency for all dies
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTTrainMaxLatency (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT32 TestAddrRJ16;
+  UINT8 Dct;
+  UINT8 ChipSel;
+  UINT8  *PatternBufPtr;
+  UINT8  *TestBufferPtr;
+  UINT8  CurrentNbPstate;
+  UINT16 CalcMaxLatDly;
+  UINT16 MaxLatDly;
+  UINT16 MaxLatLimit;
+  UINT16 Margin;
+  UINT16 CurTest;
+  UINT16 _CL_;
+  UINT8 TimesFail;
+  UINT8 TimesRetrain;
+  UINT16 i;
+
+  MEM_DATA_STRUCT *MemPtr;
+  DIE_STRUCT *MCTPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  MemPtr = NBPtr->MemPtr;
+  TechPtr->TrainingType = TRN_MAX_READ_LATENCY;
+  TimesRetrain = DEFAULT_TRAINING_TIMES;
+  IDS_OPTION_HOOK (IDS_MEM_RETRAIN_TIMES, &TimesRetrain, &MemPtr->StdHeader);
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart MaxRdLat training\n");
+  // Set environment settings before training
+  AGESA_TESTPOINT (TpProcMemMaxRdLatencyTraining, &(MemPtr->StdHeader));
+  MemTBeginTraining (TechPtr);
+  //
+  // Initialize the Training Pattern
+  //
+  if (AGESA_SUCCESS != NBPtr->TrainingPatternInit (NBPtr)) {
+    return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+  }
+  TechPtr->PatternLength = (MCTPtr->Status[Sb128bitmode]) ? 6 : 3;
+  //
+  // Setup hardware training engine (if applicable)
+  //
+  NBPtr->FamilySpecificHook[SetupHwTrainingEngine] (NBPtr, &TechPtr->TrainingType);
+
+  MaxLatDly = 0;
+  _CL_ = TechPtr->PatternLength;
+  PatternBufPtr = TechPtr->PatternBufPtr;
+  TestBufferPtr = TechPtr->TestBufPtr;
+  //
+  // Begin max latency training
+  //
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    if (MCTPtr->Status[Sb128bitmode] && (Dct != 0)) {
+      break;
+    }
+
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    NBPtr->SwitchDCT (NBPtr, Dct);
+
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      if (TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &ChipSel)) {
+        TechPtr->ChipSel = ChipSel;
+        if (NBPtr->GetSysAddr (NBPtr, ChipSel, &TestAddrRJ16)) {
+          IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+          IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrite to address: %04x0000\n", TestAddrRJ16);
+
+          // Write the test patterns
+          AGESA_TESTPOINT (TpProcMemMaxRdLatWritePattern, &(MemPtr->StdHeader));
+          NBPtr->WritePattern (NBPtr, TestAddrRJ16, PatternBufPtr, _CL_);
+
+          // Sweep max latency delays
+          NBPtr->getMaxLatParams (NBPtr, TechPtr->MaxDlyForMaxRdLat, &CalcMaxLatDly, &MaxLatLimit, &Margin);
+          AGESA_TESTPOINT (TpProcMemMaxRdLatStartSweep, &(MemPtr->StdHeader));
+
+          TimesFail = 0;
+          ERROR_HANDLE_RETRAIN_BEGIN (TimesFail, TimesRetrain)
+          {
+            MaxLatDly = CalcMaxLatDly;
+            for (i = 0; i < (MaxLatLimit - CalcMaxLatDly); i++) {
+              NBPtr->SetBitField (NBPtr, BFMaxLatency, MaxLatDly);
+              IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDly %3x", MaxLatDly);
+              TechPtr->ResetDCTWrPtr (TechPtr, 6);
+
+              AGESA_TESTPOINT (TpProcMemMaxRdLatReadPattern, &(MemPtr->StdHeader));
+              NBPtr->ReadPattern (NBPtr, TestBufferPtr, TestAddrRJ16, _CL_);
+              AGESA_TESTPOINT (TpProcMemMaxRdLatTestPattern, &(MemPtr->StdHeader));
+              CurTest = NBPtr->CompareTestPattern (NBPtr, TestBufferPtr, PatternBufPtr, _CL_ * 64);
+              NBPtr->FlushPattern (NBPtr, TestAddrRJ16, _CL_);
+
+              if (NBPtr->IsSupported[ReverseMaxRdLatTrain]) {
+                // Reverse training decrements MaxLatDly whenever the test passes
+                // and uses the last passing MaxLatDly as left edge
+                if (CurTest == 0xFFFF) {
+                  IDS_HDT_CONSOLE (MEM_FLOW, "  P");
+                  if (MaxLatDly == 0) {
+                    break;
+                  } else {
+                    MaxLatDly--;
+                  }
+                }
+              } else {
+                // Traditional training increments MaxLatDly until the test passes
+                // and uses it as left edge
+                if (CurTest == 0xFFFF) {
+                  IDS_HDT_CONSOLE (MEM_FLOW, "  P");
+                  break;
+                } else {
+                  MaxLatDly++;
+                }
+              }
+              IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+            }// End of delay sweep
+            ERROR_HANDLE_RETRAIN_END ((MaxLatDly >= MaxLatLimit), TimesFail)
+          }
+
+          AGESA_TESTPOINT (TpProcMemMaxRdLatSetDelay, &(MemPtr->StdHeader));
+
+          if (MaxLatDly >= MaxLatLimit) {
+            PutEventLog (AGESA_ERROR, MEM_ERROR_MAX_LAT_NO_WINDOW, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+            SetMemError (AGESA_ERROR, MCTPtr);
+            NBPtr->DCTPtr->Timings.CsTrainFail |= NBPtr->DCTPtr->Timings.CsPresent;
+            MCTPtr->ChannelTrainFail |= (UINT32)1 << Dct;
+            if (!NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+              ASSERT (FALSE);
+              return FALSE;
+            }
+          } else {
+            NBPtr->FamilySpecificHook[AddlMaxRdLatTrain] (NBPtr, &TestAddrRJ16);
+
+            MaxLatDly = MaxLatDly + Margin;
+            if (NBPtr->IsSupported[ReverseMaxRdLatTrain]) {
+              MaxLatDly++;  // Add 1 to get back to the last passing value
+            }
+            // Set final delays
+            CurrentNbPstate = (UINT8) MemNGetBitFieldNb (NBPtr, BFCurNbPstate);
+            ASSERT (CurrentNbPstate <= 3);
+            NBPtr->ChannelPtr->DctMaxRdLat [CurrentNbPstate] = MaxLatDly;
+            NBPtr->SetBitField (NBPtr, BFMaxLatency, MaxLatDly);
+            IDS_HDT_CONSOLE (MEM_FLOW, "\t\tFinal MaxRdLat: %03x\n", MaxLatDly);
+
+          }
+        }
+      }
+    }
+  }
+
+  // Restore environment settings after training
+  MemTEndTraining (TechPtr);
+  IDS_HDT_CONSOLE (MEM_FLOW, "End MaxRdLat training\n\n");
+  //
+  // Finalize the Pattern
+  //
+  NBPtr->TrainingPatternFinalize (NBPtr);
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttoptsrc.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttoptsrc.c
new file mode 100644
index 0000000000..aac8bb008d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttoptsrc.c
@@ -0,0 +1,428 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttoptsrc.c
+ *
+ * New Technology Software based DQS receiver enable training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_MTTOPTSRC_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemTDqsTrainOptRcvrEnSw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Pass
+  );
+
+BOOLEAN
+MemTNewRevTrainingSupport (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes first pass of receiver enable training for all dies
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTTrainOptRcvrEnSwPass1 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  return MemTDqsTrainOptRcvrEnSw (TechPtr, 1);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes receiver enable training for a specific die
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]  Pass - Pass of the receiver training
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+STATIC
+MemTDqsTrainOptRcvrEnSw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Pass
+  )
+{
+  _16BYTE_ALIGN  UINT8  PatternBuffer[6 * 64];
+  UINT8  TestBuffer[256];
+  UINT8  *PatternBufPtr[6];
+  UINT8  *TempPtr;
+  UINT32 TestAddrRJ16[4];
+  UINT32 TempAddrRJ16;
+  UINT32 RealAddr;
+  UINT16 CurTest[4];
+  UINT8 Dct;
+  UINT8 Receiver;
+  UINT8 i;
+  UINT8 TimesFail;
+  UINT8 TimesRetrain;
+  UINT16 RcvrEnDly;
+  UINT16 MaxRcvrEnDly;
+  UINT16 RcvrEnDlyLimit;
+  UINT16 MaxDelayCha;
+  BOOLEAN IsDualRank;
+  BOOLEAN S0En;
+  BOOLEAN S1En;
+
+
+  MEM_DATA_STRUCT *MemPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  TechPtr->TrainingType = TRN_RCVR_ENABLE;
+
+
+  TempAddrRJ16 = 0;
+  TempPtr = NULL;
+  MaxDelayCha = 0;
+  TimesRetrain = DEFAULT_TRAINING_TIMES;
+  IDS_OPTION_HOOK (IDS_MEM_RETRAIN_TIMES, &TimesRetrain, &MemPtr->StdHeader);
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Optimized SW RxEn training\n");
+  // Set environment settings before training
+  MemTBeginTraining (TechPtr);
+
+  PatternBufPtr[0] = PatternBufPtr[2] = PatternBuffer;
+  // These two patterns used for first Test Address
+  MemUFillTrainPattern (TestPattern0, PatternBufPtr[0], 64);
+  // Second Cacheline used for Dummy Read is the inverse of
+  //  the first so that is is not mistaken for the real read
+  MemUFillTrainPattern (TestPattern1, PatternBufPtr[0] + 64, 64);
+  PatternBufPtr[1] = PatternBufPtr[3] = PatternBufPtr[0] + 128;
+  // These two patterns used for second Test Address
+  MemUFillTrainPattern (TestPattern1, PatternBufPtr[1], 64);
+  // Second Cacheline used for Dummy Read is the inverse of
+  //  the first so that is is not mistaken for the real read
+  MemUFillTrainPattern (TestPattern0, PatternBufPtr[1] + 64, 64);
+
+  // Fill pattern for flush after every sweep
+  PatternBufPtr[4] = PatternBufPtr[0] + 256;
+  MemUFillTrainPattern (TestPattern3, PatternBufPtr[4], 64);
+
+  // Fill pattern for initial dummy read
+  PatternBufPtr[5] = PatternBufPtr[0] + 320;
+  MemUFillTrainPattern (TestPattern4, PatternBufPtr[5], 64);
+
+
+  // Begin receiver enable training
+  AGESA_TESTPOINT (TpProcMemReceiverEnableTraining, &(MemPtr->StdHeader));
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+
+    // Set training bit
+    NBPtr->SetBitField (NBPtr, BFDqsRcvEnTrain, 1);
+
+    // Relax Max Latency before training
+    NBPtr->SetMaxLatency (NBPtr, 0xFFFF);
+
+    if (Pass == FIRST_PASS) {
+      TechPtr->InitDQSPos4RcvrEn (TechPtr);
+    }
+
+    // there are four receiver pairs, loosely associated with chipselects.
+    Receiver = DCTPtr->Timings.CsEnabled ? 0 : 8;
+    for (; Receiver < 8; Receiver += 2) {
+      S0En = NBPtr->GetSysAddr (NBPtr, Receiver, &TestAddrRJ16[0]);
+      S1En = NBPtr->GetSysAddr (NBPtr, Receiver + 1, &TestAddrRJ16[2]);
+      if (S0En) {
+        TestAddrRJ16[1] = TestAddrRJ16[0] + BIGPAGE_X8_RJ16;
+      }
+      if (S1En) {
+        TestAddrRJ16[3] = TestAddrRJ16[2] + BIGPAGE_X8_RJ16;
+      }
+      if (S0En && S1En) {
+        IsDualRank = TRUE;
+      } else {
+        IsDualRank = FALSE;
+      }
+      if (S0En || S1En) {
+        IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", Receiver);
+
+        RcvrEnDlyLimit = 0x1FF;      // @attention - limit depends on proc type
+        TechPtr->DqsRcvEnSaved = 0;
+        RcvrEnDly = RcvrEnDlyLimit;
+        RealAddr = 0;
+
+        TechPtr->GetFirstPassVal = FALSE;
+        TechPtr->DqsRcvEnFirstPassVal = 0;
+        TechPtr->RevertPassVal = FALSE;
+        TechPtr->InitializeVariablesOpt (TechPtr);
+
+        // Write the test patterns
+        AGESA_TESTPOINT (TpProcMemRcvrWritePattern, &(MemPtr->StdHeader));
+        IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrite to addresses: ");
+        for (i = (S0En ? 0 : 2); i < (S1En ? 4 : 2); i++) {
+          RealAddr = MemUSetUpperFSbase (TestAddrRJ16[i], MemPtr);
+          // One cacheline of data to be tested and one of dummy data
+          MemUWriteCachelines (RealAddr, PatternBufPtr[i], 2);
+          // This is dummy data with a different pattern used for the first dummy read.
+          MemUWriteCachelines (RealAddr + 128, PatternBufPtr[5], 1);
+          IDS_HDT_CONSOLE (MEM_FLOW, " %04x0000 ", TestAddrRJ16[i]);
+        }
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+
+        // Sweep receiver enable delays
+        AGESA_TESTPOINT (TpProcMemRcvrStartSweep, &(MemPtr->StdHeader));
+        TimesFail = 0;
+        ERROR_HANDLE_RETRAIN_BEGIN (TimesFail, TimesRetrain)
+        {
+          TechPtr->LoadInitialRcvrEnDlyOpt (TechPtr, Receiver);
+          while (!TechPtr->CheckRcvrEnDlyLimitOpt (TechPtr)) {
+            AGESA_TESTPOINT (TpProcMemRcvrSetDelay, &(MemPtr->StdHeader));
+            TechPtr->SetRcvrEnDlyOpt (TechPtr, Receiver, RcvrEnDly);
+            // Read and compare the first beat of data
+            for (i = (S0En ? 0 : 2); i < (S1En ? 4 : 2); i++) {
+              AGESA_TESTPOINT (TpProcMemRcvrReadPattern, &(MemPtr->StdHeader));
+              RealAddr = MemUSetUpperFSbase (TestAddrRJ16[i], MemPtr);
+              //
+              // Issue dummy cacheline reads
+              //
+#if 0 //KR make OPT DQS Receiver Enable training happy
+              MemUReadCachelines (TestBuffer + 128, RealAddr + 128, 1);
+              MemUReadCachelines (TestBuffer, RealAddr, 1);
+#endif
+              MemUProcIOClFlush (TestAddrRJ16[i], 2, MemPtr);
+              //
+              // Perform actual read which will be compared
+              //
+              MemUReadCachelines (TestBuffer + 64, RealAddr + 64, 1);
+              AGESA_TESTPOINT (TpProcMemRcvrTestPattern, &(MemPtr->StdHeader));
+              CurTest[i] = TechPtr->Compare1ClPatternOpt (TechPtr, TestBuffer + 64 , PatternBufPtr[i] + 64, i, Receiver, S1En);
+              // Due to speculative execution during MemUReadCachelines, we must
+              //  flush one more cache line than we read.
+              MemUProcIOClFlush (TestAddrRJ16[i], 4, MemPtr);
+              TechPtr->ResetDCTWrPtr (TechPtr, Receiver);
+
+              //
+              // Swap the test pointers such that even and odd steps alternate.
+              //
+              if ((i % 2) == 0) {
+                TempPtr = PatternBufPtr[i];
+                PatternBufPtr[i] = PatternBufPtr[i + 1];
+
+                TempAddrRJ16 = TestAddrRJ16[i];
+                TestAddrRJ16[i] = TestAddrRJ16[i + 1];
+              } else {
+                PatternBufPtr[i] = TempPtr;
+                TestAddrRJ16[i] = TempAddrRJ16;
+              }
+            }
+          }   // End of delay sweep
+          ERROR_HANDLE_RETRAIN_END (!TechPtr->SetSweepErrorOpt (TechPtr, Receiver, Dct, TRUE), TimesFail)
+        }
+
+        if (!TechPtr->SetSweepErrorOpt (TechPtr, Receiver, Dct, FALSE)) {
+          return FALSE;
+        }
+
+        TechPtr->LoadRcvrEnDlyOpt (TechPtr, Receiver);     // set final delays
+        //
+        // Flush AA and 55 patterns by reading a dummy pattern to fill in FIFO
+        //
+        // Aquire a new FSBase, based on the last test address that we stored.
+        RealAddr = MemUSetUpperFSbase (TempAddrRJ16, MemPtr);
+        ASSERT (RealAddr != 0);
+        MemUWriteCachelines (RealAddr, PatternBufPtr[4], 1);
+        MemUWriteCachelines (RealAddr + 64, PatternBufPtr[4], 1);
+        MemUReadCachelines (TestBuffer, RealAddr, 2);
+        // Due to speculative execution during MemUReadCachelines, we must
+        //  flush one more cache line than we read.
+        MemUProcIOClFlush (TempAddrRJ16, 3, MemPtr);
+      }
+    }   // End while Receiver < 8
+
+    // Clear training bit when done
+    NBPtr->SetBitField (NBPtr, BFDqsRcvEnTrain, 0);
+
+    // Set Max Latency for both channels
+    MaxRcvrEnDly = TechPtr->GetMaxValueOpt (TechPtr);
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMaxRcvrEnDly: %03x\n", MaxRcvrEnDly);
+    if (MCTPtr->GangedMode) {
+      if (Dct == 0) {
+        MaxDelayCha = MaxRcvrEnDly;
+      } else if (MaxRcvrEnDly > MaxDelayCha) {
+        NBPtr->SwitchDCT (NBPtr, 0);
+        NBPtr->SetMaxLatency (NBPtr, MaxRcvrEnDly);
+      }
+    } else {
+      NBPtr->SetMaxLatency (NBPtr, MaxRcvrEnDly);
+    }
+    TechPtr->ResetDCTWrPtr (TechPtr, 6);
+  }
+
+  // Restore environment settings after training
+  MemTEndTraining (TechPtr);
+  IDS_HDT_CONSOLE (MEM_FLOW, "End Optimized SW RxEn training\n\n");
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *  This function saves passing DqsRcvEnDly values to the stack
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver  - Current Chip select value
+ *     @param[in]       RcvEnDly  - receiver enable delay to be saved
+ *     @param[in]       cmpResultRank0 - compare result for Rank 0
+ *     @param[in]       cmpResultRank0 - compare result for Rank 1
+ *
+ *     @retval  TRUE - All bytelanes pass
+ *              FALSE - Some bytelanes fail
+ * ----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemTSaveRcvrEnDlyByteFilterOpt (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly,
+  IN       UINT16 CmpResultRank0,
+  IN       UINT16 CmpResultRank1
+  )
+{
+  UINT8 i;
+  UINT8 Passed;
+  UINT8 Dimm;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  Passed = (UINT8) ((CmpResultRank0 & CmpResultRank1) & 0xFF);
+
+  Dimm = Receiver >> 1;
+
+  if (TechPtr->GetFirstPassVal && (RcvEnDly - TechPtr->DqsRcvEnFirstPassVal) >= 0x30) {
+    for (i = 0; i < 8; i++) {
+      ChannelPtr->RcvEnDlys[Dimm * TechPtr->DlyTableWidth () + i] = TechPtr->DqsRcvEnFirstPassVal + NEW_RECEIVER_FINAL_OFFSETVALUE;
+    }
+    TechPtr->DqsRcvEnSaved = 0xFF;
+  }
+
+  if (Passed == 0xFF) {
+    if (!TechPtr->GetFirstPassVal) {
+      TechPtr->DqsRcvEnFirstPassVal = RcvEnDly;
+      TechPtr->GetFirstPassVal = TRUE;
+    }
+    return TRUE;
+  } else {
+    TechPtr->DqsRcvEnFirstPassVal = 0;
+
+    // We have got first passing value, but later, we meet with glitch
+    if (TechPtr->GetFirstPassVal) {
+      TechPtr->DqsRcvEnFirstPassVal = 0xFF;
+      TechPtr->GetFirstPassVal = FALSE;
+    }
+    return FALSE;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttsrc.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttsrc.c
new file mode 100644
index 0000000000..696c46eb34
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mttsrc.c
@@ -0,0 +1,346 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttsrc.c
+ *
+ * Technology Software based DQS receiver enable training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "GeneralServices.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_TECH_MTTSRC_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemTDqsTrainRcvrEnSw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Pass
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes first pass of receiver enable training for all dies
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTTrainRcvrEnSwPass1 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  return MemTDqsTrainRcvrEnSw (TechPtr, 1);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes receiver enable training for a specific die
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]  Pass - Pass of the receiver training
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+BOOLEAN
+STATIC
+MemTDqsTrainRcvrEnSw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Pass
+  )
+{
+  _16BYTE_ALIGN  UINT8  PatternBuffer[3 * 64];
+  UINT8  TestBuffer[120];
+  UINT8  *PatternBufPtr[4];
+  UINT8  *TempPtr;
+  UINT32 TestAddrRJ16[4];
+  UINT32 TempAddrRJ16;
+  UINT32 RealAddr;
+  UINT16 CurTest[4];
+  UINT8 Dct;
+  UINT8 Receiver;
+  UINT8 i;
+  UINT8 TimesFail;
+  UINT8 TimesRetrain;
+  UINT16 RcvrEnDly;
+  UINT16 MaxRcvrEnDly;
+  UINT16 RcvrEnDlyLimit;
+  UINT16 MaxDelayCha;
+  BOOLEAN IsDualRank;
+  BOOLEAN S0En;
+  BOOLEAN S1En;
+  UINT8 MaxFilterDly;
+
+  MEM_DATA_STRUCT *MemPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  TechPtr->TrainingType = TRN_RCVR_ENABLE;
+
+
+  TempAddrRJ16 = 0;
+  TempPtr = NULL;
+  MaxDelayCha = 0;
+  MaxFilterDly = TechPtr->MaxFilterDly;
+  RcvrEnDlyLimit = NBPtr->RcvrEnDlyLimit;
+  TimesRetrain = DEFAULT_TRAINING_TIMES;
+  IDS_OPTION_HOOK (IDS_MEM_RETRAIN_TIMES, &TimesRetrain, &MemPtr->StdHeader);
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart SW RxEn training\n");
+  // Set environment settings before training
+  MemTBeginTraining (TechPtr);
+
+  PatternBufPtr[0] = PatternBufPtr[2] = PatternBuffer;
+  MemUFillTrainPattern (TestPattern0, PatternBufPtr[0], 64);
+  PatternBufPtr[1] = PatternBufPtr[3] = PatternBufPtr[0] + 128;
+  MemUFillTrainPattern (TestPattern1, PatternBufPtr[1], 64);
+
+  // Begin receiver enable training
+  AGESA_TESTPOINT (TpProcMemReceiverEnableTraining, &(MemPtr->StdHeader));
+  MaxRcvrEnDly = 0;
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+
+    // Set training bit
+    NBPtr->SetBitField (NBPtr, BFDqsRcvEnTrain, 1);
+
+    // Relax Max Latency before training
+    NBPtr->SetMaxLatency (NBPtr, 0xFFFF);
+
+    if (Pass == FIRST_PASS) {
+      TechPtr->InitDQSPos4RcvrEn (TechPtr);
+    }
+
+    // there are four receiver pairs, loosely associated with chipselects.
+    Receiver = DCTPtr->Timings.CsEnabled ? 0 : 8;
+    for (; Receiver < 8; Receiver += 2) {
+      TechPtr->DqsRcvEnSaved = 0;
+      RcvrEnDly = RcvrEnDlyLimit;
+      S0En = NBPtr->GetSysAddr (NBPtr, Receiver, &TestAddrRJ16[0]);
+      S1En = NBPtr->GetSysAddr (NBPtr, Receiver + 1, &TestAddrRJ16[2]);
+      if (S0En) {
+        TestAddrRJ16[1] = TestAddrRJ16[0] + BIGPAGE_X8_RJ16;
+      }
+      if (S1En) {
+        TestAddrRJ16[3] = TestAddrRJ16[2] + BIGPAGE_X8_RJ16;
+      }
+      if (S0En && S1En) {
+        IsDualRank = TRUE;
+      } else {
+        IsDualRank = FALSE;
+      }
+
+      if (S0En || S1En) {
+        IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", Receiver);
+
+        // Write the test patterns
+        AGESA_TESTPOINT (TpProcMemRcvrWritePattern, &(MemPtr->StdHeader));
+        IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrite to addresses: ");
+        for (i = (S0En ? 0 : 2); i < (S1En ? 4 : 2); i++) {
+          RealAddr = MemUSetUpperFSbase (TestAddrRJ16[i], MemPtr);
+          MemUWriteCachelines (RealAddr, PatternBufPtr[i], 1);
+          IDS_HDT_CONSOLE (MEM_FLOW, " %04x0000 ", TestAddrRJ16[i]);
+        }
+        IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+
+        // Initialize RcvrEnDly value and other DCT stored values
+        //                MCTPtr->DqsRcvEnPass = Pass ? 0xFF : 0;
+
+        // Sweep receiver enable delays
+        AGESA_TESTPOINT (TpProcMemRcvrStartSweep, &(MemPtr->StdHeader));
+        TimesFail = 0;
+        ERROR_HANDLE_RETRAIN_BEGIN (TimesFail, TimesRetrain)
+        {
+          for (RcvrEnDly = 0; RcvrEnDly < RcvrEnDlyLimit; RcvrEnDly++) {
+            AGESA_TESTPOINT (TpProcMemRcvrSetDelay, &(MemPtr->StdHeader));
+            TechPtr->SetRcvrEnDly (TechPtr, Receiver, RcvrEnDly);
+            IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDly %3x", RcvrEnDly);
+
+            // Read and compare the first beat of data
+            for (i = (S0En ? 0 : 2); i < (S1En ? 4 : 2); i++) {
+              AGESA_TESTPOINT (TpProcMemRcvrReadPattern, &(MemPtr->StdHeader));
+              RealAddr = MemUSetUpperFSbase (TestAddrRJ16[i], MemPtr);
+              MemUReadCachelines (TestBuffer, RealAddr, 1);
+              AGESA_TESTPOINT (TpProcMemRcvrTestPattern, &(MemPtr->StdHeader));
+              CurTest[i] = TechPtr->Compare1ClPattern (TechPtr, TestBuffer, PatternBufPtr[i]);
+              // Due to speculative execution during MemUReadCachelines, we must
+              //  flush one more cache line than we read.
+              MemUProcIOClFlush (TestAddrRJ16[i], 2, MemPtr);
+              TechPtr->ResetDCTWrPtr (TechPtr, Receiver);
+
+              //
+              // Swap the test pointers such that even and odd steps alternate.
+              //
+              if ((i % 2) == 0) {
+                TempPtr = PatternBufPtr[i];
+                PatternBufPtr[i] = PatternBufPtr[i + 1];
+
+                TempAddrRJ16 = TestAddrRJ16[i];
+                TestAddrRJ16[i] = TestAddrRJ16[i + 1];
+              } else {
+                PatternBufPtr[i] = TempPtr;
+                TestAddrRJ16[i] = TempAddrRJ16;
+              }
+            }
+
+            if (TechPtr->SaveRcvrEnDly (TechPtr, Receiver, RcvrEnDly, S0En ? (CurTest[0] & CurTest[1]) : 0xFFFF, S1En ? (CurTest[2] & CurTest[3]) : 0xFFFF)) {
+              // if all bytelanes pass
+              if (MaxRcvrEnDly < (RcvrEnDly - MaxFilterDly)) {
+                MaxRcvrEnDly = RcvrEnDly - MaxFilterDly;
+              }
+              break;
+            }
+          } // End of delay sweep
+          ERROR_HANDLE_RETRAIN_END ((RcvrEnDly > (RcvrEnDlyLimit - 1)), TimesFail)
+        }
+
+        if (RcvrEnDly == RcvrEnDlyLimit) {
+          // no passing window
+          PutEventLog (AGESA_ERROR, MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+          SetMemError (AGESA_ERROR, MCTPtr);
+        }
+
+        if (RcvrEnDly > (RcvrEnDlyLimit - 1)) {
+        // passing window too narrow, too far delayed
+          PutEventLog (AGESA_ERROR, MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+          SetMemError (AGESA_ERROR, MCTPtr);
+          DCTPtr->Timings.CsTrainFail |= DCTPtr->Timings.CsPresent & (UINT16) (3 << Receiver);
+          MCTPtr->ChannelTrainFail |= (UINT32)1 << Dct;
+          if (!NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, DCTPtr->Timings.CsTrainFail, &NBPtr->MemPtr->StdHeader)) {
+            ASSERT (FALSE);
+            return FALSE;
+          }
+        }
+      }
+
+      TechPtr->LoadRcvrEnDly (TechPtr, Receiver);     // set final delays
+    }   // End while Receiver < 8
+
+    // Clear training bit when done
+    NBPtr->SetBitField (NBPtr, BFDqsRcvEnTrain, 0);
+
+    // Set Max Latency for both channels
+    MaxRcvrEnDly += 0x20;  // @attention -
+    IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMaxRcvrEnDly: %03x\n", MaxRcvrEnDly);
+    if (MCTPtr->GangedMode) {
+      if (Dct == 0) {
+        MaxDelayCha = MaxRcvrEnDly;
+      } else if (MaxRcvrEnDly > MaxDelayCha) {
+        NBPtr->SwitchDCT (NBPtr, 0);
+        NBPtr->SetMaxLatency (NBPtr, MaxRcvrEnDly);
+      }
+    } else {
+      NBPtr->SetMaxLatency (NBPtr, MaxRcvrEnDly);
+    }
+    TechPtr->ResetDCTWrPtr (TechPtr, 6);
+  }
+
+  // Restore environment settings after training
+  MemTEndTraining (TechPtr);
+  IDS_HDT_CONSOLE (MEM_FLOW, "End SW RxEn training\n\n");
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/ma.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/ma.h
new file mode 100644
index 0000000000..17850069a3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/ma.h
@@ -0,0 +1,317 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * ma.h
+ *
+ * ARDK common header file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MA_H_
+#define _MA_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
+#define MAX_CS_PER_CHANNEL      8   ///< Max CS per channel
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/** MARDK Structure*/
+typedef struct {
+  UINT16   Speed;                  ///< Dram speed in MHz
+  UINT8    Loads;                  ///< Number of Data Loads
+  UINT32   AddrTmg;                ///< Address Timing value
+  UINT32   Odc;                    ///< Output Driver Compensation Value
+} PSCFG_ENTRY;
+
+/** MARDK Structure*/
+typedef struct {
+  UINT16   Speed;                  ///< Dram speed in MHz
+  UINT8    Loads;                  ///< Number of Data Loads
+  UINT32   AddrTmg;                ///< Address Timing value
+  UINT32   Odc;                    ///< Output Driver Compensation Value
+  UINT8    Dimms;                  ///< Number of Dimms
+} ADV_PSCFG_ENTRY;
+
+/** MARDK Structure for RDIMMs*/
+typedef struct {
+  UINT16   Speed;                  ///< Dram speed in MHz
+  UINT16   DIMMRankType;         ///< Bitmap of Ranks   //Bit0-3:DIMM0(1:SR, 2:DR, 4:QR, 0:No Dimm, 0xF:Any), Bit4-7:DIMM1, Bit8-11:DIMM2, Bit12-16:DIMM3
+  UINT32   AddrTmg;                ///< Address Timing value
+  UINT16   RC2RC8;                   ///< RC2 and RC8 value  //High byte: 1st pair value, Low byte: 2nd pair value
+  UINT8    Dimms;                  ///< Number of Dimms
+} ADV_R_PSCFG_ENTRY;
+
+/** MARDK Structure*/
+typedef struct {
+  UINT16   DIMMRankType;         ///< Bitmap of Ranks   //Bit0-3:DIMM0(1:SR, 2:DR, 4:QR, 0:No Dimm, 0xF:Any), Bit4-7:DIMM1, Bit8-11:DIMM2, Bit12-16:DIMM3
+  UINT32   PhyRODTCSLow;          ///< Fn2_9C 180
+  UINT32   PhyRODTCSHigh;         ///< Fn2_9C 181
+  UINT32   PhyWODTCSLow;          ///< Fn2_9C 182
+  UINT32   PhyWODTCSHigh;         ///< Fn2_9C 183
+  UINT8    Dimms;                  ///< Number of Dimms
+} ADV_PSCFG_ODT_ENTRY;
+
+/** MARDK Structure for Write Levelization ODT*/
+typedef struct {
+  UINT16   DIMMRankType;         ///< Bitmap of Ranks   //Bit0-3:DIMM0(1:SR, 2:DR, 4:QR, 0:No Dimm, 0xF:Any), Bit4-7:DIMM1, Bit8-11:DIMM2, Bit12-16:DIMM3
+  UINT8    PhyWrLvOdt[MAX_CS_PER_CHANNEL/2];            ///< WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm
+  UINT8    Dimms;                ///< Number of Dimms
+} ADV_R_PSCFG_WL_ODT_ENTRY;
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+MemAGetPsCfgDef (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgRDr2 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgRDr3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgUDr3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgSDA2 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgSDA3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgSNi3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgUNi3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgSRb3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgURb3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgSPh3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgUPh3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgUDA3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgRHy3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgUHy3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgRC32_3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgUC32_3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgSLN3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgULN3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgSON3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgUON3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgROr3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemAGetPsCfgUOr3 (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+UINT16
+MemAGetPsRankType (
+  IN       CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemRecNGetPsCfgDef (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+UINT16
+MemRecNGetPsRankType (
+  IN       CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemRecNGetPsCfgUDIMM3Nb (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemRecNGetPsCfgSODIMM3Nb (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+AGESA_STATUS
+MemRecNGetPsCfgRDIMM3Nb (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  );
+
+#endif  /* _MA_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/memPage.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/memPage.h
new file mode 100644
index 0000000000..4430c196ac
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/memPage.h
@@ -0,0 +1,58 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Create outline and references for Memory Component mainpage documentation.
+ *
+ * Design guides, maintenance guides, and general documentation, are
+ * collected using this file onto the documentation mainpage.
+ * This file contains doxygen comment blocks, only.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Documentation
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/**
+ * @page memmain Memory Component Documentation
+ *
+ * Additional documentation for the Memory component consists of
+ *
+ * - Maintenance Guides:
+ *   - add here >>>
+ * - Design Guides:
+ *   - add here >>>
+ *
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/merrhdl.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/merrhdl.h
new file mode 100644
index 0000000000..c4aae3e533
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/merrhdl.h
@@ -0,0 +1,104 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmerrhdl.h
+ *
+ * main error handling
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MMERRHDL_H_
+#define _MMERRHDL_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define EXCLUDE_ALL_DCT 0xFF
+#define EXCLUDE_ALL_CHIPSEL  0xFF
+
+/// default times of training
+#define DEFAULT_TRAINING_TIMES 1
+
+/// number of us to wait in parallel training
+#define PARALLEL_TRAINING_TIMEOUT 60000000
+
+/// number of us to wait in PCI space access
+#define PCI_ACCESS_TIMEOUT 10000000
+/// number of us to wait in special PCI space access which takes much longer than others
+#define SPECIAL_PCI_ACCESS_TIMEOUT 20000000
+
+/// Beginning of retrain handling, must be ended with the ending of the handling
+#define ERROR_HANDLE_RETRAIN_BEGIN(counter, limit) while (counter < limit)
+
+/// Ending of retrain handling
+#define ERROR_HANDLE_RETRAIN_END(condition, counter) \
+if (condition) { \
+  counter ++; \
+} else { \
+  break; \
+}
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemErrHandle (
+  IN       DIE_STRUCT *MCTPtr,
+  IN       UINT8  DCT,
+  IN       UINT16  ChipSelMask,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+#endif  /* _MMERRHDL_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/mfParallelTraining.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/mfParallelTraining.h
new file mode 100644
index 0000000000..73a530d070
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/mfParallelTraining.h
@@ -0,0 +1,114 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfParallelTraining.h
+ *
+ * Header file for the parallel training feature
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+#ifndef _MFPARALLELTRAINING_H_
+#define _MFPARALLELTRAINING_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+typedef BOOLEAN (*REMOTE_NBBLOCK_CONSTRUCTOR) (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       DIE_STRUCT *MCTPtr,
+  IN       MEM_FEAT_BLOCK_NB *FeatPtr
+);
+
+///< This structure defines the environment on the AP for parallel training
+typedef struct _REMOTE_TRAINING_ENV {
+  IN OUT AMD_CONFIG_PARAMS StdHeader;                ///< Config pointer of BSP
+  IN OUT AGESA_STATUS (*GetPlatformCfg[MAX_PLATFORM_TYPES]) (struct _MEM_DATA_STRUCT *MemData, UINT8 SocketID, CH_DEF_STRUCT *CurrentChannel); ///< look-up platform info
+  IN OUT BOOLEAN (*ErrorHandling)(struct _DIE_STRUCT *MCTPtr, UINT8 DCT, UINT16 ChipSelMask, AMD_CONFIG_PARAMS *StdHeader); ///< Error Handling
+  IN REMOTE_NBBLOCK_CONSTRUCTOR NBBlockCtor;         ///< NB Block constructor
+  IN MEM_FEAT_BLOCK_NB *FeatPtr;                     ///< Feature block pointer
+  IN UINT8 *TableBasedAlterations;                   ///< Point to an array of data bytes describing desired modifications to register settings
+  IN PSO_TABLE *PlatformMemoryConfiguration;                 ///< Point to platform config table
+  IN UINT32 HoleBase;                                ///< Used for Memtyping
+  IN UINT32 UmaSize;                               ///< Used for Memtyping
+  IN UINT16 BottomIo;                                ///< Used for Memtyping
+  IN UINT32 SysLimit;                                ///< Used for Memtyping
+  IN UINT8  BspSocket;                               ///< Socket number of BSP
+  IN UINT8  BspCore;                                 ///< Core number of BSP
+  IN DIE_STRUCT DieStruct;                           ///< Remote copy of Die Struct
+} REMOTE_TRAINING_ENV;
+
+///< This structure defines Die information
+typedef struct _DIE_INFO {
+  IN OUT UINT8 Socket;                               ///< Socket number
+  IN OUT UINT8 Core;                                 ///< Core number
+  IN OUT BOOLEAN Training;                           ///< Training Flag, 1 = Training has been started on this core
+} DIE_INFO;
+
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFParallelTraining (
+  IN OUT   REMOTE_TRAINING_ENV *EnvPtr,
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif  /* _MFPARALLELTRAINING_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/mfStandardTraining.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/mfStandardTraining.h
new file mode 100644
index 0000000000..0ba042ffee
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/mfStandardTraining.h
@@ -0,0 +1,82 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfStandardTraining.h
+ *
+ * Feature implementation of standard function which performs memory training
+ * from the BSP only
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+#ifndef _MFSTANDARDTRAINING_H_
+#define _MFSTANDARDTRAINING_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFStandardTraining (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MFSTANDARDTRAINING_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/mfmemclr.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/mfmemclr.h
new file mode 100644
index 0000000000..85ec85bbc9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/mfmemclr.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfmemclr.h
+ *
+ * Feature Functions For Memory Clear Operation
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MFMEMCLR_H_
+#define _MFMEMCLR_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemFMctMemClr_Init (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemFMctMemClr_Sync (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MFMEMCLR_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/mfs3.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/mfs3.h
new file mode 100644
index 0000000000..78c6ddb239
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/mfs3.h
@@ -0,0 +1,356 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfS3.h
+ *
+ * S3 resume memory related functions.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/S3)
+ * @e \$Revision: 51373 $ @e \$Date: 2011-04-21 13:10:59 -0600 (Thu, 21 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MFS3_H_
+#define _MFS3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define PRESELFREF 0
+#define POSTSELFREF 1
+#define DCT0 0
+#define DCT1 1
+#define DCT0_MASK 0x1
+#define DCT1_MASK 0x2
+#define DCT0_NBPSTATE_SUPPORT_MASK 0x4
+#define DCT1_NBPSTATE_SUPPORT_MASK 0x8
+#define DCT0_DDR3_MASK 0x10
+#define DCT1_DDR3_MASK 0x20
+#define NODE_WITHOUT_DIMM_MASK 0x80
+#define DCT0_ANY_DIMM_MASK 0x55
+#define DCT1_ANY_DIMM_MASK 0xAA
+#define ANY_DIMM_MASK 0xFF
+
+#define DCT_PHY_FLAG 0
+#define DCT_EXTRA_FLAG 1
+#define SET_S3_SPECIAL_OFFSET(AccessType, Dct, Offset) ((AccessType << 11) | (Dct << 10) | Offset)
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/// struct for all the descriptor for pre exit self refresh and post exit self refresh
+typedef struct _DESCRIPTOR_GROUP {
+  PCI_DEVICE_DESCRIPTOR PCIDevice[2];  ///< PCI device descriptor
+  CONDITIONAL_PCI_DEVICE_DESCRIPTOR CPCIDevice[2];  ///< Conditional PCI device descriptor
+  MSR_DEVICE_DESCRIPTOR MSRDevice[2];  ///< MSR device descriptor
+  CONDITIONAL_MSR_DEVICE_DESCRIPTOR CMSRDevice[2];  ///< Conditional MSR device descriptor
+} DESCRIPTOR_GROUP;
+
+/// Northbridge block to be used in S3 resume and save.
+typedef struct _S3_MEM_NB_BLOCK {
+  UINT8 MemS3SpecialCaseHeapSize; ///< Heap size for the special case register heap.
+  struct _MEM_NB_BLOCK *NBPtr;    ///< Pointer to the north bridge block.
+  VOID (*MemS3ExitSelfRefReg) (MEM_NB_BLOCK *NBPtr, AMD_CONFIG_PARAMS *StdHeaderPtr); ///< S3 Exit self refresh register
+  VOID (*MemS3GetConPCIMask) (MEM_NB_BLOCK *NBPtr, DESCRIPTOR_GROUP *DescriptPtr); ///< Get conditional mask for PCI register setting
+  VOID (*MemS3GetConMSRMask) (MEM_NB_BLOCK *NBPtr, DESCRIPTOR_GROUP *DescriptPtr); ///< Get conditional mask for MSR register setting
+  UINT16 (*MemS3GetRegLstPtr) (MEM_NB_BLOCK *NBPtr, DESCRIPTOR_GROUP *DescriptPtr); ///< Get register list pointer for both PCI and MSR register
+  BOOLEAN (*MemS3Resume) (struct _S3_MEM_NB_BLOCK *S3NBPtr, UINT8 NodeID);///< Exit Self Refresh
+  VOID (*MemS3RestoreScrub) (MEM_NB_BLOCK *NBPtr, UINT8 NodeID);///< Restore scrubber base
+  AGESA_STATUS (*MemS3GetDeviceRegLst) (UINT32 ReigsterLstID, VOID **RegisterHeader); ///< Get register list for a device
+} S3_MEM_NB_BLOCK;
+
+/// Header for heap space to store the special case register.
+typedef struct _S3_SPECIAL_CASE_HEAP_HEADER {
+  UINT8 Node;  ///< Node ID for the the header
+  UINT8 Offset;  ///< Offset for the target node
+} S3_SPECIAL_CASE_HEAP_HEADER;
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdMemS3Resume (
+  IN   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+MemS3ResumeInitNB (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+MemS3Deallocate (
+  IN   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+AGESA_STATUS
+MemFS3GetPciDeviceRegisterList (
+  IN       PCI_DEVICE_DESCRIPTOR     *Device,
+     OUT   PCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+AGESA_STATUS
+MemFS3GetCPciDeviceRegisterList (
+  IN       CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+     OUT   CPCI_REGISTER_BLOCK_HEADER        **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS                 *StdHeader
+  );
+
+AGESA_STATUS
+MemFS3GetMsrDeviceRegisterList (
+  IN       MSR_DEVICE_DESCRIPTOR     *Device,
+     OUT   MSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS         *StdHeader
+  );
+
+AGESA_STATUS
+MemFS3GetCMsrDeviceRegisterList (
+  IN       CONDITIONAL_MSR_DEVICE_DESCRIPTOR     *Device,
+     OUT   CMSR_REGISTER_BLOCK_HEADER            **RegisterHdr,
+  IN       AMD_CONFIG_PARAMS                     *StdHeader
+  );
+
+AGESA_STATUS
+MemFS3GetDeviceList (
+  IN OUT   DEVICE_BLOCK_HEADER **DeviceBlockHdrPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+MemFS3Wait10ns (
+  IN       UINT32 Count,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+BOOLEAN
+MemNS3ResumeNb (
+  IN OUT   S3_MEM_NB_BLOCK *S3NBPtr,
+  IN       UINT8 NodeID
+  );
+
+BOOLEAN
+MemNS3ResumeClientNb (
+  IN OUT   S3_MEM_NB_BLOCK *S3NBPtr,
+  IN       UINT8 NodeID
+  );
+
+BOOLEAN
+MemNS3ResumeUNb (
+  IN OUT   S3_MEM_NB_BLOCK *S3NBPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemNS3GetConPCIMaskNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  );
+
+VOID
+MemNS3GetConPCIMaskUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   DESCRIPTOR_GROUP *DescriptPtr
+  );
+
+VOID
+MemNS3GetCSRNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN       VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3SetCSRNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3GetBitFieldNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3SetBitFieldNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3RestoreScrubNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Node
+  );
+
+AGESA_STATUS
+MemS3InitNB (
+  IN OUT   S3_MEM_NB_BLOCK **S3NBPtr,
+  IN OUT   MEM_DATA_STRUCT **MemPtr,
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmData,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+MemNS3DisNbPsDbgNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3EnNbPsDbg1Nb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3SetDynModeChangeNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3DisableChannelNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3SetDisAutoCompUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3SetPreDriverCalUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+BOOLEAN
+MemNS3DctCfgSelectUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       VOID *Dct
+  );
+
+VOID
+MemNS3GetNBPStateDepRegUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3SetNBPStateDepRegUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3SaveNBRegiserUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3RestoreNBRegiserUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3SetMemClkFreqValUnb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3ChangeMemPStateContextNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+VOID
+MemNS3SetPhyClkDllFineClientNb (
+  IN       ACCESS_WIDTH AccessWidth,
+  IN       PCI_ADDR Address,
+  IN OUT   VOID *Value,
+  IN OUT   VOID *ConfigPtr
+  );
+
+#endif //_MFS3_H_
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/mftds.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/mftds.h
new file mode 100644
index 0000000000..1a8ba10907
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/mftds.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mftds.h
+ *
+ * Memory Controller
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+#ifndef _MFTDS_H_
+#define _MFTDS_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+MemFInitTableDrive (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8     time
+  );
+#endif  /* _MFTDS_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/mm.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/mm.h
new file mode 100644
index 0000000000..084c0fd3b9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/mm.h
@@ -0,0 +1,1307 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mm.h
+ *
+ * Common main functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 58718 $ @e \$Date: 2011-09-05 23:23:08 -0600 (Mon, 05 Sep 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+  *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+  *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MM_H_
+#define _MM_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+#define ALLOC_SOCKET_STRUCT_HANDLE    0
+#define ALLOC_DIE_STRUCT_HANDLE       1
+#define ALLOC_DCT_STRUCT_HANDLE       2
+#define ALLOC_CHL_STRUCT_HANDLE       3
+#define ALLOC_PLATFORM_PTR_HANDLE     4
+#define ALLOC_FORM_FACTOR_HANDLE      5
+#define ALLOC_TRN_DATA_HANDLE         6
+#define ALLOC_DIMM_DATA_HANDLE        7
+#define ALLOC_PAR_TRN_HANDLE          8
+#define ALLOC_NB_REG_TABLE            9
+
+#define GENERATE_MEM_HANDLE(type, x, y, z) (\
+  AMD_MEM_MISC_HANDLES_START + (((type) << 18) + ((x) << 12) + ((y) << 6) + (z)) \
+)
+
+/// Heap handle for each supported family's NB register table
+typedef enum {
+  NbRegTabDR,           ///< Heap handle for DR NB register table
+  NbRegTabDA,           ///< Heap handle for DA NB register table
+  NbRegTabC32,          ///< Heap handle for C32 NB register table
+  NbRegTabHY,           ///< Heap handle for HY NB register table
+  NbRegTabKR,           ///< Heap handle for KR NB register table
+  NbRegTabLN,           ///< Heap handle for LN NB register table
+  NbRegTabON,           ///< Heap handle for ON NB register table
+  NbRegTabOR,           ///< Heap handle for OR NB register table
+  NbRegTabTN,           ///< Heap handle for TN NB register table
+  NumberOfNbRegTables   ///< Number of families that have NB register tables
+} NB_REG_TAB_HANDLE;
+
+
+#define VOLT1_5_ENCODED_VAL 0
+#define VOLT1_35_ENCODED_VAL 1
+#define VOLT1_25_ENCODED_VAL 2
+#define CONVERT_VDDIO_TO_ENCODED(VddIo) (\
+  (VddIo == VOLT1_5) ? VOLT1_5_ENCODED_VAL : ((VddIo == VOLT1_35) ? VOLT1_35_ENCODED_VAL : ((VddIo == VOLT1_25) ? VOLT1_25_ENCODED_VAL : 0xFF)) \
+)
+#define CONVERT_ENCODED_TO_VDDIO(EncodedVal) (\
+  (EncodedVal == VOLT1_5_ENCODED_VAL) ? VOLT1_5 : ((EncodedVal == VOLT1_35_ENCODED_VAL) ? VOLT1_35 : ((EncodedVal == VOLT1_25_ENCODED_VAL) ? VOLT1_25 : VOLT_UNSUPPORTED)) \
+)
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// Bit field names used in memory initialization
+typedef enum {
+  BFDevVendorIDReg,                     ///< Bit field DevVendorIDReg
+  BFNodeID,                             ///< Bit field NodeID
+  BFNodeCnt,                            ///< Bit field NodeCnt
+
+  BFDramBaseReg0,                       ///< Bit field DramBaseReg0
+  BFDramBaseReg1,                       ///< Bit field DramBaseReg1
+  BFDramBaseReg2,                       ///< Bit field DramBaseReg2
+  BFDramBaseReg3,                       ///< Bit field DramBaseReg3
+  BFDramBaseReg4,                       ///< Bit field DramBaseReg4
+  BFDramBaseReg5,                       ///< Bit field DramBaseReg5
+  BFDramBaseReg6,                       ///< Bit field DramBaseReg6
+  BFDramBaseReg7,                       ///< Bit field DramBaseReg7
+
+  BFDramLimitReg0,                      ///< Bit field DramLimitReg0
+  BFDramLimitReg1,                      ///< Bit field DramLimitReg1
+  BFDramLimitReg2,                      ///< Bit field DramLimitReg2
+  BFDramLimitReg3,                      ///< Bit field DramLimitReg3
+  BFDramLimitReg4,                      ///< Bit field DramLimitReg4
+  BFDramLimitReg5,                      ///< Bit field DramLimitReg5
+  BFDramLimitReg6,                      ///< Bit field DramLimitReg6
+  BFDramLimitReg7,                      ///< Bit field DramLimitReg7
+
+  BFDramBaseHiReg0,                     ///< Bit field DramBaseHiReg0
+  BFDramBaseHiReg1,                     ///< Bit field DramBaseHiReg1
+  BFDramBaseHiReg2,                     ///< Bit field DramBaseHiReg2
+  BFDramBaseHiReg3,                     ///< Bit field DramBaseHiReg3
+  BFDramBaseHiReg4,                     ///< Bit field DramBaseHiReg4
+  BFDramBaseHiReg5,                     ///< Bit field DramBaseHiReg5
+  BFDramBaseHiReg6,                     ///< Bit field DramBaseHiReg6
+  BFDramBaseHiReg7,                     ///< Bit field DramBaseHiReg7
+
+  BFDramLimitHiReg0,                    ///< Bit field DramLimitHiReg0
+  BFDramLimitHiReg1,                    ///< Bit field DramLimitHiReg1
+  BFDramLimitHiReg2,                    ///< Bit field DramLimitHiReg2
+  BFDramLimitHiReg3,                    ///< Bit field DramLimitHiReg3
+  BFDramLimitHiReg4,                    ///< Bit field DramLimitHiReg4
+  BFDramLimitHiReg5,                    ///< Bit field DramLimitHiReg5
+  BFDramLimitHiReg6,                    ///< Bit field DramLimitHiReg6
+  BFDramLimitHiReg7,                    ///< Bit field DramLimitHiReg7
+
+  BFDramHoleAddrReg,                    ///< Bit field DramHoleAddrReg
+
+  BFCSBaseAddr0Reg,                     ///< Bit field CSBaseAddr0Reg
+  BFCSBaseAddr1Reg,                     ///< Bit field CSBaseAddr1Reg
+  BFCSBaseAddr2Reg,                     ///< Bit field CSBaseAddr2Reg
+  BFCSBaseAddr3Reg,                     ///< Bit field CSBaseAddr3Reg
+  BFCSBaseAddr4Reg,                     ///< Bit field CSBaseAddr4Reg
+  BFCSBaseAddr5Reg,                     ///< Bit field CSBaseAddr5Reg
+  BFCSBaseAddr6Reg,                     ///< Bit field CSBaseAddr6Reg
+  BFCSBaseAddr7Reg,                     ///< Bit field CSBaseAddr7Reg
+
+  BFCSMask0Reg,                         ///< Bit field CSMask0Reg
+  BFCSMask1Reg,                         ///< Bit field CSMask1Reg
+  BFCSMask2Reg,                         ///< Bit field CSMask2Reg
+  BFCSMask3Reg,                         ///< Bit field CSMask3Reg
+
+  BFRankDef0,                           ///< Bit field RankDef 0
+  BFRankDef1,                           ///< Bit field RankDef 1
+  BFRankDef2,                           ///< Bit field RankDef 2
+  BFRankDef3,                           ///< Bit field RankDef 3
+
+  BFDramControlReg,                     ///< Bit field DramControlReg
+  BFDramInitRegReg,                     ///< Bit field DramInitRegReg
+  BFDramBankAddrReg,                    ///< Bit field DramBankAddrReg
+  BFDramMRSReg,                         ///< Bit field DramMRSReg
+  BFDramTimingLoReg,                    ///< Bit field DramTimingLoReg
+  BFDramTimingHiReg,                    ///< Bit field DramTimingHiReg
+  BFDramConfigLoReg,                    ///< Bit field DramConfigLoReg
+  BFDramConfigHiReg,                    ///< Bit field DramConfigHiReg
+  BFDctAddlOffsetReg,                   ///< Bit field DctAddlOffsetReg
+  BFDctAddlDataReg,                     ///< Bit field DctAddlDataReg
+  BFDctAccessDone,                      ///< Bit field DctAccessDone
+  BFDctAccessError,                     ///< Bit field DctAccessError
+  BFDctExtraOffsetReg,                  ///< Bit field DctExtraOffsetReg
+  BFDctExtraDataReg,                    ///< Bit field DctExtraDataReg
+  BFDctExtraAccessDone,                 ///< Bit field DctExtraAccessDone
+  BFDramConfigMiscReg,                  ///< Bit field DramConfigMiscReg
+  BFDramCtrlMiscReg2,                   ///< Bit field DramCtrlMiscReg2
+  BFMctCfgHiReg,                        ///< Bit field MctCfgHiReg
+  BFMctCfgLoReg,                        ///< Bit field MctCfgLoReg
+  BFExtMctCfgLoReg,                     ///< Bit field ExtMctCfgLoReg
+  BFExtMctCfgHiReg,                     ///< Bit field ExtMctCfgHiReg
+  BFDcqBwThrotWm,                       ///< Bit field DcqBwThrotWm
+  BFPrefFiveConf,                       ///< Bit field PrefFiveConf
+  BFPrefFourConf,                       ///< Bit field PrefFourConf
+  BFEnSplitDctLimits,                   ///< Bit field EnSplitDctLimits
+  BFDcqBwThrotWm1,                      ///< Bit field DcqBwThrotWm1
+  BFDcqBwThrotWm2,                      ///< Bit field DcqBwThrotWm2
+
+  BFCSMapCKE,                           ///< Bit field CSMapCKE
+  BFTrdrdBan,                           ///< Bit field TrdrdBan
+  BFTzqcs,                              ///< Bit field Tzqcs
+  BFTzqoper,                            ///< Bit field Tzqoper
+
+  BFDramHoleBase,                       ///< Bit field DramHoleBase
+  BFDramHoleOffset,                     ///< Bit field DramHoleOffset
+  BFDramMemHoistValid,                  ///< Bit field DramMemHoistValid
+  BFDramHtHoleValid,                    ///< Bit field BFDramHtHoleValid
+  BFDramHoleValid,                      ///< Bit field DramHoleValid
+  BFDramBaseAddr,                       ///< Bit field DramBaseAddr
+  BFDramIntlvSel,                       ///< Bit field DramIntlvSel
+  BFDramLimitAddr,                      ///< Bit field DramLimitAddr
+  BFDramIntlvEn,                        ///< Bit field DramIntlvEn
+  BFMemPsSel,                           ///< Bit field MemPsSel
+  BFDctCfgSel,                          ///< Bit field DctCfgSel
+  BFRcvParErr,                          ///< Bit field RcvParErr
+
+  BFDctBaseReg0,                        ///< Bit field DctBaseReg0
+  BFDctBaseReg1,                        ///< Bit field DctBaseReg1
+  BFDctBaseReg2,                        ///< Bit field DctBaseReg2
+  BFDctBaseReg3,                        ///< Bit field DctBaseReg3
+
+  BFDctLimitReg0,                       ///< Bit field DctLimitReg0
+  BFDctLimitReg1,                       ///< Bit field DctLimitReg1
+  BFDctLimitReg2,                       ///< Bit field DctLimitReg2
+  BFDctLimitReg3,                       ///< Bit field DctLimitReg3
+
+  BFDctHighAddressOffsetReg0,           ///< Bit field DctHighAddressOffsetReg0
+  BFDctHighAddressOffsetReg1,           ///< Bit field DctHighAddressOffsetReg1
+  BFDctHighAddressOffsetReg2,           ///< Bit field DctHighAddressOffsetReg2
+
+  BFDctTriChannelInterleaveReg0,        ///< Bit field DctTriChannelInterleaveReg0
+  BFDctTriChannelInterleaveReg1,        ///< Bit field DctTriChannelInterleaveReg1
+  BFDctTriChannelInterleaveReg2,        ///< Bit field DctTriChannelInterleaveReg2
+  BFDctTriChannelInterleaveReg3,        ///< Bit field DctTriChannelInterleaveReg3
+  BFDctTriChannelInterleaveReg4,        ///< Bit field DctTriChannelInterleaveReg4
+  BFDctTriChannelInterleaveReg5,        ///< Bit field DctTriChannelInterleaveReg5
+  BFDctTriChannelInterleaveReg6,        ///< Bit field DctTriChannelInterleaveReg6
+  BFDctTriChannelInterleaveReg7,        ///< Bit field DctTriChannelInterleaveReg7
+
+  BF3DStackHeight0,                     ///< Bit field 3DStackHeight0
+  BF3DStackHeight1,                     ///< Bit field 3DStackHeight1
+  BF3DStackHeight2,                     ///< Bit field 3DStackHeight2
+  BF3DStackHeight3,                     ///< Bit field 3DStackHeight3
+
+  BFIdleCycLowLimit,                    ///< Bit field IdleCycLowLimit
+  BFPendRefPayback,                     ///< Bit field PendRefPayback
+  BFProcOdtDis,                         ///< Bit field ProcOdtDis
+
+
+
+  BFMcaNbCtlReg,                        ///< Bit field McaNbCtlReg
+  BFDramEccEn,                          ///< Bit field DramEccEn
+  BFSyncOnUcEccEn,                      ///< Bit field SyncOnUcEccEn
+  BFEccSymbolSize,                      ///< Bit field EccSymbolSize
+  BFMcaNbStatusLoReg,                   ///< Bit field McaNbStatusLoReg
+  BFMcaNbStatusHiReg,                   ///< Bit field McaNbStatusHiReg
+  BFDramScrub,                          ///< Bit field DramScrub
+  BFL2Scrub,                            ///< Bit field L2Scrub
+  BFDcacheScrub,                        ///< Bit field DcacheScrub
+  BFL3Scrub,                            ///< Bit field L3Scrub
+  BFScrubReDirEn,                       ///< Bit field ScrubReDirEn
+  BFScrubAddrLoReg,                     ///< Bit field ScrubAddrLoReg
+  BFScrubAddrHiReg,                     ///< Bit field ScrubAddrHiReg
+  BFC1ClkDivisor,                       ///< Bit field C1ClkDivisor
+  BFDisDatMsk,                          ///< Bit field DisDatMsk
+  BFNbFid,                              ///< Bit field NbFid
+  BFMTC1eEn,                            ///< Bit field MTC1eEn
+  BFL3Capable,                          ///< Bit field L3Capable
+  BFReserved00B,                        ///< Bit field BFReserved00B
+  BFEnhMemProtCap,                      ///< Bit field EnhMemProtCap
+  BFNbPsForceReq,                       ///< Bit field NbPsForceReq
+  BFNbPsCtrlDis,                        ///< Bit field NbPsCtrlDis
+  BFNbPsCap,                            ///< Bit field NbPsCap
+
+  BFNonSPDHi,                           ///< Bit field NonSPDHi
+  BFRdPtrInit,                          ///< Bit field RdPtrInit
+  BFReserved001,                        ///< Bit field Reserved001
+  BFDqsRcvEnTrain,                      ///< Bit field DqsRcvEnTrain
+  BFEarlyArbEn,                         ///< Bit field EarlyArbEn
+  BFMaxLatency,                         ///< Bit field either MaxRdLat or MaxAsyncLat
+
+  BFMrsAddress,                         ///< Bit field MrsAddress
+  BFMrsBank,                            ///< Bit field MrsBank
+  BFMrsChipSel,                         ///< Bit field MrsChipSel
+  BFSendPchgAll,                        ///< Bit field SendPchgAll
+  BFSendAutoRefresh,                    ///< Bit field SendAutoRefresh
+  BFSendMrsCmd,                         ///< Bit field SendMrsCmd
+  BFDeassertMemRstX,                    ///< Bit field DeassertMemRstX
+  BFAssertCke,                          ///< Bit field AssertCke
+  BFSendZQCmd,                          ///< Bit field SendZQCmd
+  BFSendCtrlWord,                       ///< Bit field SendCtrlWord
+  BFEnDramInit,                         ///< Bit field EnDramInit
+  BFMrsLevel,                           ///< Bit field MrsLevel
+  BFMrsQoff,                            ///< Bit field MrsQoff
+  BFMrsAddressHi,                       ///< Bit field MrsAddress [17:13]
+
+  BFBurstCtrl,                          ///< Bit field BurstCtrl
+  BFDrvImpCtrl,                         ///< Bit field DrvImpCtrl
+  BFDramTerm_DDR3,                      ///< Bit field DramTerm_DDR3
+  BFDramTermDyn,                        ///< Bit field DramTermDyn
+  BFQoff,                               ///< Bit field Qoff
+  BFASR,                                ///< Bit field ASR
+  BFSRT,                                ///< Bit field SRT
+  BFTcwl,                               ///< Bit field Tcwl
+  BFPchgPDModeSel,                      ///< Bit field PchgPDModeSel
+  BFLowPowerDefault,                    ///< Bit field LowPowerDefault
+
+  BFTwrDDR3,                            ///< Bit field TwrDDR3
+  BFTcl,                                ///< Bit field Tcl
+  BFTrcd,                               ///< Bit field Trcd
+  BFTrp,                                ///< Bit field Trp
+  BFTrtp,                               ///< Bit field Trtp
+  BFTras,                               ///< Bit field Tras
+  BFTrc,                                ///< Bit field Trc
+  BFTwr,                                ///< Bit field Twr
+  BFTrrd,                               ///< Bit field Trrd
+  BFMemClkDis,                          ///< Bit field MemClkDis
+  BFDramTiming0,                        ///< Bit field BFDramTiming0
+  BFDramTiming1,                        ///< Bit field BFDramTiming1
+  BFDramTiming2,                        ///< Bit field BFDramTiming2
+  BFDramTiming3,                        ///< Bit field BFDramTiming3
+  BFDramTiming4,                        ///< Bit field BFDramTiming4
+  BFDramTiming5,                        ///< Bit field BFDramTiming5
+  BFDramTiming6,                        ///< Bit field BFDramTiming6
+  BFDramTiming10,                       ///< Bit field BFDramTiming10
+  BFDramNBP0,                           ///< Bit field BFDramNBP0
+
+  BFNonSPD,                             ///< Bit field NonSPD
+  BFTrwtWB,                             ///< Bit field TrwtWB
+  BFTrwtTO,                             ///< Bit field TrwtTO
+  BFTwtr,                               ///< Bit field Twtr
+  BFTwrrd,                              ///< Bit field Twrrd
+  BFTwrrdHi,                            ///< Bit field TwrrdHi
+  BFTwrwr,                              ///< Bit field Twrwr
+  BFTwrwrHi,                            ///< Bit field TwrwrHi
+  BFTrdrdSD,                            ///< Bit field TrdrdSD
+  BFTwrwrSD,                            ///< Bit field TwrwrSD
+  BFTwrrdSD,                            ///< Bit field TwrrdSD
+  BFTmod,                               ///< Bit field Tmod
+  BFTmrd,                               ///< Bit field Tmrd
+  BFRdOdtTrnOnDly,                      ///< Bit field RdOdtTrnOnDly
+  BFRdOdtOnDuration,                    ///< Bit field RdOdtOnDuration
+  BFWrOdtTrnOnDly,                      ///< Bit field WrOdtTrnOnDly
+  BFWrOdtOnDuration,                    ///< Bit field WrOdtOnDuration
+  BFPrtlChPDDynDly,                     ///< Bit field PrtlChPDDynDly
+
+  BFAggrPDDelay,                        ///< Bit field AggrPDDelay
+  BFPchgPDEnDelay,                      ///< Bit field PchgPDEnDelay
+
+  BFTrdrd,                              ///< Bit field Trdrd
+  BFTrdrdHi,                            ///< Bit field TrdrdHi
+  BFTref,                               ///< Bit field Tref
+  BFDisAutoRefresh,                     ///< Bit field DisAutoRefresh
+  BFTrfc0,                              ///< Bit field Trfc0
+  BFTrfc1,                              ///< Bit field Trfc1
+  BFTrfc2,                              ///< Bit field Trfc2
+  BFTrfc3,                              ///< Bit field Trfc3
+
+  BFInitDram,                           ///< Bit field InitDram
+  BFExitSelfRef,                        ///< Bit field ExitSelfRef
+  BFDramTerm,                           ///< Bit field DramTerm
+  BFParEn,                              ///< Bit field ParEn
+  BFBurstLength32,                      ///< Bit field BurstLength32
+  BFWidth128,                           ///< Bit field Width128
+  BFX4Dimm,                             ///< Bit field X4Dimm
+  BFDimmEccEn,                          ///< Bit field DimmEccEn
+  BFUnBuffDimm,                         ///< Bit field UnBuffDimm
+  BFEnterSelfRef,                       ///< Bit field EnterSelfRef
+  BFDynPageCloseEn,                     ///< Bit field DynPageCloseEn
+  BFIdleCycInit,                        ///< Bit field IdleCycInit
+  BFFreqChgInProg,                      ///< Bit field FreqChgInProg
+  BFForceAutoPchg,                      ///< Bit field ForceAutoPchg
+  BFStagRefEn,                          ///< Bit field StagRefEn
+  BFPendRefPaybackS3En,                 ///< Bit field PendRefPaybackS3En
+  BFEnDispAutoPrecharge,                ///< Bit field EnDispAutoPrecharge
+  BFDisDllShutdownSR,                   ///< Bit field DisDllShutdownSR
+  BFDisSscClkGateData,                  ///< Bit field DisSscClkGateData
+  BFDisSscClkGateCmdAddr,               ///< Bit field DisSscClkGateCmdAddr
+  BFDisSimulRdWr,                       ///< Bit field DisSimulRdWr
+
+  BFMemClkFreq,                         ///< Bit field MemClkFreq
+  BFMemClkFreqVal,                      ///< Bit field MemClkFreqVal
+  BFDdr3Mode,                           ///< Bit field Ddr3Mode
+  BFLegacyBiosMode,                     ///< Bit field LegacyBiosMode
+  BFZqcsInterval,                       ///< Bit field ZqcsInterval
+  BFRDqsEn,                             ///< Bit field RDqsEn
+  BFDisDramInterface,                   ///< Bit field DisDramInterface
+  BFPowerDownEn,                        ///< Bit field PowerDownEn
+  BFPowerDownMode,                      ///< Bit field PowerDownMode
+  BFFourRankSoDimm,                     ///< Bit field FourRankSoDimm
+  BFDcqArbBypassEn,                     ///< Bit field DcqArbBypassEn
+  BFFourRankRDimm,                      ///< Bit field FourRankRDimm
+  BFSlowAccessMode,                     ///< Bit field SlowAccessMode
+  BFBankSwizzleMode,                    ///< Bit field BankSwizzleMode
+  BFDcqBypassMax,                       ///< Bit field DcqBypassMax
+  BFFourActWindow,                      ///< Bit field FourActWindow
+  BFDphyMemPsSelEn,                     ///< Bit field BFDphyMemPsSelEn
+
+  BFODTSEn,                             ///< Bit field ODTSEn
+  BFCmdThrottleMode,                    ///< Bit field CmdThrottleMode
+  BFBwCapEn,                            ///< Bit field BwCapEn
+
+  BFDdr3FourSocketCh,                   ///< Bit field Ddr3FourSocketCh
+  BFSubMemclkRegDly,                    ///< Bit field SubMemclkRegDly
+  BFOdtSwizzle,                         ///< Bit field OdtSwizzle
+  BFProgOdtEn,                          ///< Bit field ProgOdtEn
+  BFCtrlWordCS,                         ///< Bit field CtrlWordCS
+  BFRefChCmdMgtDis,                     ///< Bit field RefChCmdMgtDis
+  BFFastSelfRefEntryDis,                ///< Bit field FastSelfRefEntryDis
+  BFPrtlChPDEnhEn,                      ///< Bit field PrtlChPDEnhEn
+  BFAggrPDEn,                           ///< Bit field AggrPDEn
+  BFDataTxFifoWrDly,                    ///< Bit field DataTxFifoWrDly
+  BFWrDqDqsEarly,                       ///< Bit field WrDqDqsEarly
+  BFCSMux45,                            ///< Bit field CSMux45
+  BFCSMux67,                            ///< Bit field CSMux67
+  BFLrDimmMrsCtrl,                      ///< Bit field LrDimmMrsCtrl
+  BFExtendedParityEn,                   ///< Bit field ExtendedParityEn
+  BFLrDimmEnhRefEn,                     ///< Bit field LrDimmEnhRefEn
+  BFCSTimingMux67,                      ///< Bit field CSTimingMux67
+  BFLrDimmErrOutMonEn,                  ///< Bit field LrDimmErrOutMonEn
+
+  BFIntLvRgnSwapEn,                     ///< Bit field IntLvRgnSwapEn
+  BFIntLvRgnBaseAddr,                   ///< Bit field IntLvRgnBaseAddr
+  BFIntLvRgnLmtAddr,                    ///< Bit field IntLvRgnLmtAddr
+  BFIntLvRgnSize,                       ///< Bit field IntLvRgnSize
+
+  BFDctSelHiRngEn,                      ///< Bit field DctSelHiRngEn
+  BFDctSelHi,                           ///< Bit field DctSelHi
+  BFDctSelIntLvEn,                      ///< Bit field DctSelIntLvEn
+  BFMemClrInit,                         ///< Bit field MemClrInit
+  BFDctGangEn,                          ///< Bit field DctGangEn
+  BFDctDatIntLv,                        ///< Bit field DctDatIntLv
+  BFDctSelIntLvAddr,                    ///< Bit field DctSelIntLvAddr
+  BFDctSelIntLvAddrHi,                  ///< Bit field DctSelIntLvAddrHi
+  BFParallelMemClrEn,                   ///< Bit field ParallelMemClrEn
+  BFDramEnabled,                        ///< Bit field DramEnabled
+  BFMemClrBusy,                         ///< Bit field MemClrBusy
+  BFMemCleared,                         ///< Bit field MemCleared
+  BFDctSelBaseAddr,                     ///< Bit field DctSelBaseAddr
+  BFDctSelBaseOffset,                   ///< Bit field DctSelBaseOffset
+  BFDctSelBankSwap,                     ///< Bit field DctSelBankSwap
+
+  BFAdapPrefMissRatio,                  ///< Bit field AdapPrefMissRatio
+  BFAdapPrefPosStep,                    ///< Bit field AdapPrefPosStep
+  BFAdapPrefNegStep,                    ///< Bit field AdapPrefNegStep
+  BFCohPrefPrbLmt,                      ///< Bit field CohPrefPrbLmt
+
+  BFFlushWrOnS3StpGnt,                  ///< Bit field FlushWrOnS3StpGnt
+
+  BFPrefDramTrainDone,                  ///< Bit field PrefDramTrainDone
+  BFWrDramTrainMode,                    ///< Bit field WrDramTrainMode
+  BFMctPrefReqLimit,                    ///< Bit field MctPrefReqLimit
+  BFPrefDramTrainMode,                  ///< Bit field PrefDramTrainMode
+  BFDctWrLimit,                         ///< Bit field DctWrLimit
+  BFMctWrLimit,                         ///< Bit field MctWrLimit
+  BFDramTrainPdbDis,                    ///< Bit field DramTrainPdbDis
+  BFTrainLength,                        ///< Bit field TrainLength
+  BFRdTrainGo,                          ///< Bit field RdTrainGo
+  BFWrTrainGo,                          ///< Bit field WrTrainGo
+  BFWrTrainAdrPtrLo,                    ///< Bit field WrTrainAdrPtrLo
+  BFWrTrainAdrPtrHi,                    ///< Bit field WrTrainAdrPtrHi
+  BFWrTrainBufAddr,                     ///< Bit field WrTrainBufAddr
+  BFWrTrainBufDat,                      ///< Bit field WrTrainBufDat
+  BFFlushWr,                            ///< Bit field FlushWr
+  BFFlushWrOnStpGnt,                    ///< Bit field FlushWrOnStpGnt
+  BFPrefCpuDis,                         ///< Bit field PrefCpuDis
+  BFPrefIoDis,                          ///< Bit field PrefIoDis
+  BFPrefThreeConf,                      ///< Bit field PrefThreeConf
+  BFTrainCmpSts,                        ///< Bit field TrainCmpSts
+  BFTrainCmpSts2,                       ///< Bit field TrainCmpSts2
+  BFTraceModeEn,                        ///< Bit field TraceModeEn
+
+  BFAddrCmdDrvStren,                    ///< Bit field AddrCmdDrvStren
+  BFDataDrvStren,                       ///< Bit field DataDrvStren
+  BFCkeDrvStren,                        ///< Bit field CkeDrvStren
+  BFCsOdtDrvStren,                      ///< Bit field CsOdtDrvStren
+  BFClkDrvStren,                        ///< Bit field ClkDrvStren
+  BFDqsDrvStren,                        ///< Bit field DqsDrvStren
+  BFProcOdt,                              ///< Bit field ProcOdt
+  BFODCControl,                         ///< Bit field ODCControl
+  BFAddrTmgControl,                     ///< Bit field AddrTmgControl
+  BFAddrCmdFineDelay,                   ///< Bit field AddrCmdFineDelay
+
+  BFWrtLvTrEn,                          ///< Bit field WrtLvTrEn
+  BFWrtLvTrMode,                        ///< Bit field WrtLvTrMode
+  BFPhyFenceTrEn,                       ///< Bit field PhyFenceTrEn
+  BFTrDimmSel,                          ///< Bit field TrDimmSel
+  BFTrNibbleSel,                        ///< Bit field TrNibbleSel
+  BFFenceTrSel,                         ///< Bit field FenceTrSel
+  BFWrLvOdt,                            ///< Bit field WrLvOdt
+  BFWrLvOdtEn,                          ///< Bit field WrLvOdtEn
+  BFDqsRcvTrEn,                         ///< Bit field DqsRcvTrEn
+  BFDisAutoComp,                        ///< Bit field DisAutoComp
+  BFWrtLvErr,                           ///< Bit field WrtLvErr
+  BFODTAssertionCtl,                    ///< Bit field ODTAssertionCtl
+  BFNibbleTrainModeEn,                  ///< Bit field NibbleTrainModeEn
+  BFRankTrainModeEn,                    ///< Bit field RankTrainModeEn
+  BFPllMult,                            ///< Bit field PllMult
+  BFPllDiv,                             ///< Bit field PllDiv
+  BFDramPhyCtlReg,                      ///< Bit field Dram Phy Control Register
+
+  BFDramPhyStatusReg,                   ///< Bit field DramPhyStatusReg
+
+  BFD3Cmp2PCal,                         ///< Bit field D3Cmp2PCal
+  BFD3Cmp2NCal,                         ///< Bit field D3Cmp2NCal
+  BFD3Cmp1PCal,                         ///< Bit field D3Cmp1PCal
+  BFD3Cmp1NCal,                         ///< Bit field D3Cmp1NCal
+  BFD3Cmp0PCal,                         ///< Bit field D3Cmp0PCal
+  BFD3Cmp0NCal,                         ///< Bit field D3Cmp0NCal
+
+  BFPhyFence,                           ///< Bit field PhyFence
+  BFODTTri,                             ///< Bit field ODTTri
+  BFCKETri,                             ///< Bit field CKETri
+  BFChipSelTri,                         ///< Bit field ChipSelTri
+  BFPhyRODTCSLow,                       ///< Bit field PhyRODTCSLow
+  BFPhyRODTCSHigh,                      ///< Bit field PhyRODTCSHigh
+  BFPhyWODTCSLow,                       ///< Bit field PhyWODTCSLow
+  BFPhyWODTCSHigh,                      ///< Bit field PhyWODTCSHigh
+  BFUSPLLCtlAll,                        ///< Bit field USPLLCtlAll
+  BFDSPLLCtlAll,                        ///< Bit field DSPLLCtlAll
+  BFUSNibbleAlignEn,                    ///< Bit field USNibbleAlignEn
+  BFChnLinitClkEn,                      ///< Bit field ChnLinitClkEn
+
+  BFTSLinkSelect,                       ///< Bit field TSLinkSelect
+  BFTS2BitLockEn,                       ///< Bit field TS2BitLockEn
+  BFTS2En,                              ///< Bit field TS2En
+  BFTS1En,                              ///< Bit field TS1En
+  BFTS0LinkStarEn,                      ///< Bit field TS0LinkStarEn
+  BFTS0En,                              ///< Bit field TS0En
+
+  BFLinkTrainData,                      ///< Bit field LinkTrainData
+
+  BFRstRxFifoPtrs,                      ///< Bit field RstRxFifoPtrs
+  BFRxFifoPtrInit,                      ///< Bit field RxFifoPtrInit
+  BFRstTxFifoPtrs,                      ///< Bit field RstTxFifoPtrs
+  BFTxFifoPtrInit,                      ///< Bit field TxFifoPtrInit
+
+  BFLpbkCount,                          ///< Bit field LpbkCount
+  BFLpbkMap,                            ///< Bit field LpbkMap
+  BFSendLpbkMaintCmd,                   ///< Bit field SendLpbkMaintCmd
+  BFLpbkData,                           ///< Bit field LpbkData
+
+  BFMbRdPtrEn,                          ///< Bit field MbRdPtrEn
+  BFLnkLpBkLat,                         ///< Bit field LnkLpBkLat
+  BFLpbkRndTripLatDone,                 ///< Bit field LpbkRndTripLatDone
+  BFLnkLatTrainEn,                      ///< Bit field LnkLatTrainEn
+
+  BFDsPhyReset,                         ///< Bit field DsPhyReset
+  BFLinkReset,                          ///< Bit field LinkReset
+
+  BFPllLockTime,                        ///< Bit field PllLockTime
+  BFPllRegWaitTime,                     ///< Bit field PllRegWaitTime
+  BFNclkFreqDone,                       ///< Bit field NclkFreqDone
+  BFNbPs0NclkDiv,                       ///< Bit field NbPs0NclkDiv
+  BFNbPs1NclkDiv,                       ///< Bit field NbPs1NclkDiv
+  BFNbPsCsrAccSel,                      ///< Bit field NbPsCsrAccSel
+  BFNbPsDbgEn,                          ///< Bit field NbPsDbgEn
+  BFNclkRampWithDllRelock,              ///< Bit field NclkRampWithDllRelock
+
+  BFOnLineSpareControl,                 ///< Bit field OnLineSpareControl
+  BFDdrMaxRate,                         ///< Bit field DdrMaxRate
+
+  BFPhyDctCfgSelMode,                   ///< Bit field PhyDctCfgSelMode
+  BFNbPstateDis,                        ///< Bit field NbPstateDis
+  BFNbPsSel,                            ///< Bit field NbPsSel
+  BFNbPstateCtlReg,                     ///< Bit field NB Pstate Control register
+  BFSwNbPstateLoDis,                    ///< Bit field SwNbPstateLoDis
+  BFNbPstateLo,                         ///< Bit field NbPstateLo
+  BFNbPstateHi,                         ///< Bit field NbPstateHi
+  BFNbPstateMaxVal,                     ///< Bit field NbPstateMaxVal
+  BFCurNbPstate,                        ///< Bit field NbCurNbPstate
+
+  BFC6Base,                             ///< Bit field C6Base
+  BFC6DramLock,                         ///< Bit field C6DramLock
+  BFCC6SaveEn,                          ///< Bit field CC6SaveEn
+  BFCoreStateSaveDestNode,              ///< Bit field CoreStateSaveDestNode
+
+  BFRxPtrInitReq,                       ///< Bit field RxPtrInitReq
+  BFAddrCmdTriEn,                       ///< Bit field AddrCmdTriEn
+  BFForceCasToSlot0,                    ///< Bit field ForceCasToSlot0
+  BFDisCutThroughMode,                  ///< Bit field DisCutThroughMode
+  BFDbeSkidBufDis,                      ///< Bit field DbeSkidBufDis
+  BFDbeGskMemClkAlignMode,              ///< Bit field DbeGskMemClkAlignMode
+  BFEnCpuSerRdBehindNpIoWr,             ///< Bit field EnCpuSerRdBehindNpIoWr
+  BFDRAMPhyDLLControl,                  ///< Bit field DRAMPhyDLLControl
+  BFRxDLLWakeupTime,                    ///< Bit field RxDllWakeupTime
+  BFRxCPUpdPeriod,                      ///< Bit field RxCPUpdPeriod
+  BFRxMaxDurDllNoLock,                  ///< Bit field RxMaxDurDllNoLock
+  BFTxDLLWakeupTime,                    ///< Bit field TxDllWakeupTime
+  BFTxCPUpdPeriod,                      ///< Bit field TxCPUpdPeriod
+  BFTxMaxDurDllNoLock,                  ///< Bit field TxMaxDurDllNoLock
+  BFEnRxPadStandby,                     ///< Bit field EnRxPadStandby
+  BFMaxSkipErrTrain,                    ///< Bit field MaxSkipErrTrain
+  BFSlotSel,                            ///< Bit field SlotSel
+  BFSlot1ExtraClkEn,                    ///< Bit field Slot1ExtraClkEn
+
+  BFMemTempHot,                         ///< Bit field MemTempHot
+  BFDoubleTrefRateEn,                   ///< Bit field DoubleTrefRateEn
+
+  BFAcpiPwrStsCtrlHi,                   ///< Bit field BFAcpiPwrStsCtrlHi
+  BFDramSrHysEn,                        ///< Bit field BFDramSrHysEn
+  BFDramSrHys,                          ///< Bit field BFDramSrHys
+  BFMemTriStateEn,                      ///< Bit field BFMemTriStateEn
+  BFDramSrEn,                           ///< Bit field BFDramSrEn
+
+  BFReserved002,                        ///< Bit field BFReserved002
+  BFFourRankRDimm0,                     ///< Bit field BFFourRankRDimm0
+  BFFourRankRDimm1,                     ///< Bit field BFFourRankRDimm1
+  BFTwrwrSdSc,                          ///< Bit field BFTwrwrSdSc
+  BFTwrwrSdDc,                          ///< Bit field BFTwrwrSdDc
+  BFTwrwrDd,                            ///< Bit field BFTwrwrDd
+  BFTrdrdSdSc,                          ///< Bit field BFTrdrdSdSc
+  BFTrdrdSdDc,                          ///< Bit field BFTrdrdSdDc
+  BFTrdrdDd,                            ///< Bit field BFTrdrdDd
+  BFTstag0,                             ///< Bit field BFTstag0
+  BFTstag1,                             ///< Bit field BFTstag1
+  BFTstag2,                             ///< Bit field BFTstag2
+  BFTstag3,                             ///< Bit field BFTstag3
+
+  BFDataPatGenSel,                      ///< Bit field DataPatGenSel
+  BFActPchgGenEn,                       ///< Bit field ActPchgGenEn
+  BFShmooRdDqsDly,                      ///< Bit field ShmooRdDqsDly
+
+  BFCmdSendInProg,                      ///< Bit field CmdSendInProg
+  BFSendCmd,                            ///< Bit field SendCmd
+  BFTestStatus,                         ///< Bit field TestStatus
+  BFCmdTgt,                             ///< Bit field CmdTgt
+  BFCmdType,                            ///< Bit field CmdType
+  BFStopOnErr,                          ///< Bit field StopOnErr
+  BFResetAllErr,                        ///< Bit field ResetAllErr
+  BFCmdTestEnable,                      ///< Bit field CmdTestEnable
+  BFTgtChipSelectA,                     ///< Bit field TgtChipSelectA
+  BFTgtBankA,                           ///< Bit field TgtBankA
+  BFTgtAddressHiA,                      ///< Bit field TgtAddressHiA
+  BFTgtAddressA,                        ///< Bit field TgtAddressA
+  BFTgtChipSelectB,                     ///< Bit field TgtChipSelectB
+  BFTgtBankB,                           ///< Bit field TgtBankB
+  BFTgtAddressHiB,                      ///< Bit field TgtAddressHiB
+  BFTgtAddressB,                        ///< Bit field TgtAddressB
+  BFReserved008,                        ///< Bit field Reserved008
+  BFReserved007,                        ///< Bit field Reserved007
+  BFReserved006,                        ///< Bit field Reserved006
+  BFCmdCount,                           ///< Bit field CmdCount
+  BFErrDqNum,                           ///< Bit field ErrDQNum
+  BFErrCnt,                             ///< Bit field ErrCnt
+  BFNibbleErrSts,                       ///< Bit field NibbleErrSts
+  BFNibbleErr180Sts,                    ///< Bit field NibbleErr180Sts
+  BFDataPrbsSeed,                       ///< Bit field DataPrbsSeed
+  BFDramDqMaskLow,                      ///< Bit field DramDqMaskLow
+  BFDramDqMaskHigh,                     ///< Bit field DramDqMaskHigh
+  BFDramEccMask,                        ///< Bit field DramEccMask
+  BFDQPatOvrEn0,                        ///< Bit field DQPatOvrEn0
+  BFDQPatOvrEn1,                        ///< Bit field DQPatOvrEn1
+  BFXorPatOvr,                          ///< Bit field XorPatOvr
+  BFPatOvrVal,                          ///< Bit field PatOvrVal
+  BFEccPatOvrEn,                        ///< Bit field EccPatOvrEn
+  BFSendActCmd,                         ///< Bit field SendActCmd
+  BFSendPchgCmd,                        ///< Bit field SendPchgCmd
+  BFCmdChipSelect,                      ///< Bit field CmdChipSelect
+  BFCmdBank,                            ///< Bit field CmdBank
+  BFCmdAddress,                         ///< Bit field CmdAddress
+  BFErrBeatNum,                         ///< Bit Field ErrBeatNum
+  BFErrCmdNum,                          ///< Bit field BFErrCmdNum
+  BFDQErrLow,                           ///< Bit field DQSErrLow
+  BFDQErrHigh,                          ///< Bit field DQSErrHigh
+  BFEccErr,                             ///< Bit field EccErr
+  BFFastMstateDis,                      ///< Bit field FastMstateDis
+  BFDramUserDataPattern0,               ///< Bit field DramUserDataPattern0
+  BFDramUserDataPattern1,               ///< Bit field DramUserDataPattern1
+  BFDramUserDataPattern2,               ///< Bit field DramUserDataPattern2
+  BFDramUserDataPattern3,               ///< Bit field DramUserDataPattern3
+  BFActPchgSeq,                         ///< Bit field ActPchgSeq
+  BFActPchgCmdMin,                      ///< Bit field ActPchgCmdMin
+  BFDramCommandReg4,                    ///< Bit field DramCommandReg4
+  BFDramCommandReg5,                    ///< Bit field DramCommandReg5
+  BFNibbleErrStsSel,                    ///< Bit field NibbleErrStsSel
+  BFErrStsDly,                          ///< Bit field ErrStsDly
+  BFErrStsDly180,                       ///< Bit field ErrStsDly180
+
+  /* Bit fields for workarounds */
+  BFErr263,                             ///< Bit field Err263
+  BFErr350,                             ///< Bit field Err350
+  BFErr322I,                            ///< Bit field Err322I
+  BFErr322II,                           ///< Bit field Err322II
+  BFErratum468WorkaroundNotRequired,    ///< Bit field Erratum468WorkaroundNotRequired
+
+  /* Bit fields for Phy */
+  BFEccDLLConf,                         ///< Bit field EccDLLConf
+  BFProcOdtAdv,                         ///< Bit field ProcOdtAdv
+  BFEccDLLPwrDnConf,                    ///< Bit field EccDLLPwrDnConf
+  BFPhyPLLLockTime,                     ///< Bit field PhyPLLLockTime
+  BFPhyDLLLockTime,                     ///< Bit field PhyDLLLockTime
+  BFSkewMemClk,                         ///< Bit field SkewMemClk
+  BFPhyDLLControl,                      ///< Bit field BFPhyDLLControl
+  BFPhy0x0D080F0C,                      ///< Bit field BFPhy0x0D080F0C
+  BFPhy0x0D080F10,                      ///< Bit field BFPhy0x0D080F10
+  BFPhy0x0D080F11,                      ///< Bit field BFPhy0x0D080F11
+  BFPhy0x0D088F30,                      ///< Bit field BFPhy0x0D088F30
+  BFPhy0x0D08C030,                      ///< Bit field BFPhy0x0D08C030
+  BFPhy0x0D082F30,                      ///< Bit field BFPhy0x0D082F30
+  BFDiffTimingEn,                       ///< Bit Field DiffTimingEn
+  BFFence,                              ///< Bit Field Fence
+  BFDelay,                              ///< Bit Field Delay
+  BFFenceValue,                         ///< Bit Field FenceValue
+
+  BFPhy0x0D040F3E,                      ///< Bit field BFPhy0x0D040F3E
+  BFPhy0x0D042F3E,                      ///< Bit field BFPhy0x0D042F3E
+  BFPhy0x0D048F3E,                      ///< Bit field BFPhy0x0D048F3E
+  BFPhy0x0D04DF3E,                      ///< Bit field BFPhy0x0D04DF3E
+
+  BFPhyClkDllFine0,                   ///< Bit field ClkDllFineDly 0
+  BFPhyClkDllFine1,                   ///< Bit field ClkDllFineDly 1
+
+  BFPhyClkConfig0,                    ///< Bit field ClkConfig0
+  BFPhyClkConfig1,                    ///< Bit field ClkConfig1
+  BFPhyClkConfig2,                    ///< Bit field ClkConfig2
+  BFPhyClkConfig3,                    ///< Bit field ClkConfig3
+
+  BFPhy0x0D0F0F13,                      ///< Bit field BFPhy0x0D0F0F13
+  BFPhy0x0D0F0F13Bit0to7,               ///< Bit field BFPhy0x0D0F0F13Bit0to7
+  BFPhy0x0D0F0830,                      ///< Bit field BFPhy0x0D0F0830
+  BFPhy0x0D07812F,                      ///< Bit field BFPhy0x0D0F8108
+
+  BFDataRxVioLvl,                       ///< Bit field DataRxVioLvl
+  BFClkRxVioLvl,                        ///< Bit field ClkRxVioLvl
+  BFCmdRxVioLvl,                        ///< Bit field CmdRxVioLvl
+  BFAddrRxVioLvl,                       ///< Bit field AddrRxVioLvl
+  BFCmpVioLvl,                          ///< Bit field CmpVioLvl
+  BFCsrComparator,                      ///< Bit field CsrComparator
+  BFAlwaysEnDllClks,                    ///< Bit field AlwaysEnDllClks
+  BFPhy0x0D0FE00A,                      ///< Bit field Phy0x0D0FE00A
+  BFPllPdMode,                          ///< Bit fields SelCsrPllPdMode and CsrPhySrPllPdMode
+
+  BFDataFence2,                         ///< Bit field DataFence2
+  BFClkFence2,                          ///< Bit field ClkFence2
+  BFCmdFence2,                          ///< Bit field CmdFence2
+  BFAddrFence2,                         ///< Bit field AddrFence2
+
+  BFDataByteDMConf,                     ///< Bit field DataByteDMConf
+
+  BFAddrCmdTri,                         ///< Bit field BFAddrCmdTri
+  BFReserved00C,                        ///< Bit field BFReserved00C
+  BFLevel,                              ///< Bit field Level
+
+  BFDbeGskFifoNumerator,                ///< Bit field DbeGskFifoNumerator
+  BFDbeGskFifoDenominator,              ///< Bit field DbeGskFifoDenominator
+  BFDataTxFifoSchedDlyNegSlot0,         ///< Bit field DataTxFifoSchedDlyNegSlot0
+  BFDataTxFifoSchedDlyNegSlot1,         ///< Bit field DataTxFifoSchedDlyNegSlot1
+  BFDataTxFifoSchedDlySlot0,            ///< Bit field DataTxFifoSchedDlySlot0
+  BFDataTxFifoSchedDlySlot1,            ///< Bit field DataTxFifoSchedDlySlot1
+
+  BFDisablePredriverCal,                ///< Bit field DisablePredriverCal
+  BFDataByteTxPreDriverCal,             ///< Bit field DataByteTxPreDriverCal
+  BFDataByteTxPreDriverCal2Pad1,        ///< Bit field DataByteTxPreDriverCal2Pad1
+  BFDataByteTxPreDriverCal2Pad2,        ///< Bit field DataByteTxPreDriverCal2Pad2
+  BFCmdAddr0TxPreDriverCal2Pad1,        ///< Bit field CmdAddr0TxPreDriverCal2Pad1
+  BFCmdAddr0TxPreDriverCal2Pad2,        ///< Bit field CmdAddr0TxPreDriverCal2Pad2
+  BFCmdAddr1TxPreDriverCal2Pad1,        ///< Bit field CmdAddr1TxPreDriverCal2Pad1
+  BFCmdAddr1TxPreDriverCal2Pad2,        ///< Bit field CmdAddr1TxPreDriverCal2Pad2
+  BFAddrTxPreDriverCal2Pad1,            ///< Bit field AddrTxPreDriverCal2Pad1
+  BFAddrTxPreDriverCal2Pad2,            ///< Bit field AddrTxPreDriverCal2Pad2
+  BFAddrTxPreDriverCal2Pad3,            ///< Bit field AddrTxPreDriverCal2Pad3
+  BFAddrTxPreDriverCal2Pad4,            ///< Bit field AddrTxPreDriverCal2Pad4
+  BFCmdAddr0TxPreDriverCalPad0,         ///< Bit field CmdAddr0TxPreDriverCalPad0
+  BFCmdAddr1TxPreDriverCalPad0,         ///< Bit field CmdAddr1TxPreDriverCalPad0
+  BFAddrTxPreDriverCalPad0,             ///< Bit field AddrTxPreDriverCalPad0
+  BFClock0TxPreDriverCalPad0,           ///< Bit field Clock0TxPreDriverCalPad0
+  BFClock1TxPreDriverCalPad0,           ///< Bit field Clock1TxPreDriverCalPad0
+  BFClock2TxPreDriverCalPad0,           ///< Bit field Clock2TxPreDriverCalPad0
+  BFPNOdtCal,                           ///< Bit field P/NOdtCal
+  BFPNDrvCal,                           ///< Bit field P/NDrvCal
+  BFCalVal,                             ///< Bit field CalVal
+  BFPStateToAccess,                     ///< Bit field PStateToAccess
+  BFReserved009,                        ///< Bit Field BFReserved009
+
+  BFTxp,                                ///< Bit field Txp
+  BFTxpdll,                             ///< Bit field Txpdll
+  BFDramPwrMngm1Reg,                    ///< Bit field DRAM Power Management 1 register
+  BFL3ScrbRedirDis,                     ///< Bit field L3ScrbRedirDis
+  BFDQOdt03,                            ///< Bit field DQ Odt 0-3
+  BFDQOdt47,                            ///< Bit field DQ Odt 4-7
+  BFTriDM,                              ///< Bit field TriDM
+
+  BFTcksrx,                             ///< Bit field Tcksrx
+  BFTcksre,                             ///< Bit field Tcksre
+  BFTckesr,                             ///< Bit field Tckesr
+  BFTpd,                                ///< Bit field Tpd
+
+  BFFixedErrataSkipPorFreqCap,          ///< Bit field FixedErrataSkipPorFreqCap
+  BFPerRankTimingEn,                    ///< Bit field PerRankTimingEn
+  BFMemPhyPllPdMode,                    ///< Bit field MemPhyPllPdMode
+  BFBankSwap,                           ///< Bit field BankSwap
+  BFBwCapCmdThrottleMode,               ///< Bit field BwCapCmdThrottleMode
+  BFRxChMntClkEn,                       ///< Bit field RxChMntClkEn
+  BFBlockRxDqsLock,                      ///< Bit field BlockRxDqsLock
+  BFRxSsbMntClkEn,                      ///< Bit field RxSsbMntClkEn
+  BFPhyPSMasterChannel,                 ///< Bit field PhyPSMasterChannel
+
+  BFReserved8_0,                        ///< Bit field BFReserved8_0
+  BFReserved8_1,                        ///< Bit field VrefDAC
+  BFReserved4_0,                        ///< Bit field BFReserved4_0
+  BFReserved4_1,                        ///< Bit field BFReserved4_1
+  BFReserved4_2,                        ///< Bit field BFReserved4_2
+  BFReserved4_3,                        ///< Bit field BFReserved4_3
+  BFReserved4_4,                        ///< Bit field BFReserved4_4
+  BFReserved4_5,                        ///< Bit field BFReserved4_5
+  BFReserved4_6,                        ///< Bit field BFReserved4_6
+  BFReserved4_7,                        ///< Bit field BFReserved4_7
+  BFReserved4_8,                        ///< Bit field BFReserved4_8
+  BFReserved4_9,                        ///< Bit field BFReserved4_9
+  BFReserved4_A,                        ///< Bit field BFReserved4_A
+  BFReserved4_B,                        ///< Bit field BFReserved4_B
+  BFReserved4_C,                        ///< Bit field BFReserved4_C
+  BFReserved4_D,                        ///< Bit field BFReserved4_D
+  BFReserved4_E,                        ///< Bit field BFReserved4_E
+  BFReserved4_F,                        ///< Bit field BFReserved4_F
+  BFReserved4_10,                       ///< Bit field BFReserved4_10
+  BFReserved4_11,                       ///< Bit field BFReserved4_11
+  BFReserved4_12,                       ///< Bit field BFReserved4_12
+  BFReserved5_0,                        ///< Bit field BFReserved5_0
+  BFReserved5_1,                        ///< Bit field BFReserved5_1
+  BFReserved5_2,                        ///< Bit field BFReserved5_2
+  BFReserved5_3,                        ///< Bit field BFReserved5_3
+  BFReserved5_4,                        ///< Bit field BFReserved5_4
+  BFReserved5_5,                        ///< Bit field BFReserved5_5
+  BFReserved5_6,                        ///< Bit field BFReserved5_6
+  BFReserved5_7,                        ///< Bit field BFReserved5_7
+  BFReserved5_8,                        ///< Bit field BFReserved5_8
+  BFReserved5_9,                        ///< Bit field BFReserved5_9
+  BFReserved5_A,                        ///< Bit field BFReserved5_A
+  BFReserved5_B,                        ///< Bit field BFReserved5_B
+  BFReserved5_C,                        ///< Bit field BFReserved5_C
+  BFReserved5_D,                        ///< Bit field BFReserved5_D
+  BFReserved5_E,                        ///< Bit field BFReserved5_E
+  BFReserved5_F,                        ///< Bit field BFReserved5_F
+  BFReserved5_10,                       ///< Bit field BFReserved5_10
+  BFReserved5_11,                       ///< Bit field BFReserved5_11
+  BFReserved5_12,                       ///< Bit field BFReserved5_12
+  BFReserved6_0,                        ///< Bit field BFReserved6_0
+  BFReserved6_1,                        ///< Bit field BFReserved6_1
+  BFReserved6_2,                        ///< Bit field BFReserved6_2
+  BFReserved6_3,                        ///< Bit field BFReserved6_3
+  BFReserved6_4,                        ///< Bit field BFReserved6_4
+  BFReserved6_5,                        ///< Bit field BFReserved6_5
+  BFReserved6_6,                        ///< Bit field BFReserved6_6
+  BFReserved6_7,                        ///< Bit field BFReserved6_7
+  BFReserved6_8,                        ///< Bit field BFReserved6_8
+  BFReserved6_9,                        ///< Bit field BFReserved6_9
+  BFReserved6_A,                        ///< Bit field BFReserved6_A
+  BFReserved6_B,                        ///< Bit field BFReserved6_B
+  BFReserved6_C,                        ///< Bit field BFReserved6_C
+  BFReserved6_D,                        ///< Bit field BFReserved6_D
+  BFReserved6_E,                        ///< Bit field BFReserved6_E
+  BFReserved6_F,                        ///< Bit field BFReserved6_F
+  BFReserved6_10,                       ///< Bit field BFReserved6_10
+  BFReserved6_11,                       ///< Bit field BFReserved6_11
+  BFReserved6_12,                       ///< Bit field BFReserved6_12
+  BFReserved7_0,                        ///< Bit field BFReserved7_0
+  BFReserved7_1,                        ///< Bit field BFReserved7_1
+  BFReserved7_2,                        ///< Bit field BFReserved7_2
+  BFReserved7_3,                        ///< Bit field BFReserved7_3
+  BFReserved7_4,                        ///< Bit field BFReserved7_4
+  BFReserved7_5,                        ///< Bit field BFReserved7_5
+  BFReserved7_6,                        ///< Bit field BFReserved7_6
+  BFReserved7_7,                        ///< Bit field BFReserved7_7
+  BFReserved7_8,                        ///< Bit field BFReserved7_8
+  BFReserved7_9,                        ///< Bit field BFReserved7_9
+  BFReserved7_A,                        ///< Bit field BFReserved7_A
+  BFReserved7_B,                        ///< Bit field BFReserved7_B
+  BFReserved7_C,                        ///< Bit field BFReserved7_C
+  BFReserved7_D,                        ///< Bit field BFReserved7_D
+  BFReserved7_E,                        ///< Bit field BFReserved7_E
+  BFReserved7_F,                        ///< Bit field BFReserved7_F
+  BFReserved7_10,                       ///< Bit field BFReserved7_10
+  BFReserved7_11,                       ///< Bit field BFReserved7_11
+  BFReserved7_12,                       ///< Bit field BFReserved7_12
+  BFDataByteDllPowerMgnByte0,           ///< Bit field DataByteDllPowerManagement for Byte 0
+  BFDataByteDllPowerMgnByte1,           ///< Bit field DataByteDllPowerManagement for Byte 1
+  BFDataByteDllPowerMgnByte2,           ///< Bit field DataByteDllPowerManagement for Byte 2
+  BFDataByteDllPowerMgnByte3,           ///< Bit field DataByteDllPowerManagement for Byte 3
+  BFDataByteDllPowerMgnByte4,           ///< Bit field DataByteDllPowerManagement for Byte 4
+  BFDataByteDllPowerMgnByte5,           ///< Bit field DataByteDllPowerManagement for Byte 5
+  BFDataByteDllPowerMgnByte6,           ///< Bit field DataByteDllPowerManagement for Byte 6
+  BFDataByteDllPowerMgnByte7,           ///< Bit field DataByteDllPowerManagement for Byte 7
+  BFDataByteDllPowerMgnByte8,           ///< Bit field DataByteDllPowerManagement for Byte ECC
+  BFDataByteDllPowerMgnByteAll,         ///< Bit field DataByteDllPowerManagement for all bytes
+
+  BFReserved00A,                        ///< Bit field for BFReserved00A
+  BFReserved003,                        ///< Bit field for BFReserved003
+  BFM1MemClkFreq,                       ///< Bit field M1MemClkFreq
+  BFRate,                               ///< Bit field Rate
+  BFFence2,                             ///< Bit field Fence2
+
+  BFNbVid0,                             ///< Bit field NbVid for NB Pstate 0
+  BFNbVid0Hi,                           ///< Bit field 7th bit of NbVid for NB Pstate 0
+  BFNbVid1,                             ///< Bit field NbVid for NB Pstate 1
+  BFNbVid1Hi,                           ///< Bit field 7th bit of NbVid for NB Pstate 1
+  BFNbVid2,                             ///< Bit field NbVid for NB Pstate 2
+  BFNbVid2Hi,                           ///< Bit field 7th bit of NbVid for NB Pstate 2
+  BFNbVid3,                             ///< Bit field NbVid for NB Pstate 3
+  BFNbVid3Hi,                           ///< Bit field 7th bit of NbVid for NB Pstate 3
+
+  BFMemPstate0,                         ///< Bit field MemPstate for NB Pstate 0
+  BFMemPstate1,                         ///< Bit field MemPstate for NB Pstate 1
+  BFMemPstate2,                         ///< Bit field MemPstate for NB Pstate 2
+  BFMemPstate3,                         ///< Bit field MemPstate for NB Pstate 3
+  BFMemPstateDis,                       ///< Bit field MemPstateDis
+  BFMultiNodeCpu,                        ///< Bit field for MultiNodeCpu( MCM capability)
+
+  BFRxBypass3rd4thStg,                  ///< Bit field RxBypass3rd4thStg
+  BFRx4thStgEn,                         ///< Bit field Rx4thStgEn
+  BFDllNoLock,                          ///< Bit field DllNoLock
+  BFEnSplitMctDatBuffers,               ///< Bit field EnSplitMctDatBuffers
+  BFGmcTokenLimit,                      ///< Bit fieid GmcTokenLimit
+  BFMctTokenLimit,                      ///< Bit field MctTokenLimit
+  BFGmcToDctControl1,                   ///< Bit field GmcToDctControl1
+  BFDllCSRBisaTrimDByte,                ///< Bit field DllCSRBisaTrimDByte
+  BFDllCSRBisaTrimClk,                  ///< Bit field DllCSRBisaTrimClk
+  BFDllCSRBisaTrimCsOdt,                ///< Bit field DllCSRBisaTrimCsOdt
+  BFDllCSRBisaTrimAByte2,               ///< Bit field DllCSRBisaTrimAByte2
+  BFReduceLoop,                         ///< Bit field ReduceLoop
+  BFEffArbDis,                          ///< Bit field EffArbDis
+  BFReserved005,                        ///< Bit field for Reserved005 register
+  BFDramCommand2,                       ///< Bit field for DramCommand2 register
+  BFReserved004,                        ///< Bit field for DramLoopbackAndTrainingControl register
+
+  // Reserved
+  BFReserved01,                         ///< Reserved 01
+  BFReserved02,                         ///< Reserved 02
+  BFReserved03,                         ///< Reserved 03
+  BFReserved04,                         ///< Reserved 04
+  BFReserved05,                         ///< Reserved 05
+  BFReserved06,                         ///< Reserved 06
+  BFReserved07,                         ///< Reserved 07
+  BFReserved08,                         ///< Reserved 08
+  BFReserved09,                         ///< Reserved 09
+  BFReserved10,                         ///< Reserved 10
+
+  BFReserved11,                         ///< Reserved 11
+  BFReserved12,                         ///< Reserved 12
+  BFReserved13,                         ///< Reserved 13
+  BFReserved14,                         ///< Reserved 14
+  BFReserved15,                         ///< Reserved 15
+  BFReserved16,                         ///< Reserved 16
+  BFReserved17,                         ///< Reserved 17
+  BFReserved18,                         ///< Reserved 18
+  BFReserved19,                         ///< Reserved 19
+  BFReserved20,                         ///< Reserved 20
+  BFIdsCmnMemReg,                       ///< Reserved for ids only, the value may dynamic change
+  BFDctSelBaseAddrReg,                  ///< Bit field DctSelBaseAddrReg
+  BFDctSelBaseOffsetReg,                ///< Bit field DctSelBaseOffsetReg
+
+  /* End of accessible list --- entries below this line are for private use ------------*/
+  BFEndOfList,                          ///< End of bit field list
+
+  // Only for Table Drive Support define.
+  BFRcvEnDly,       ///< F2x[1,0]9C_x[2B:10] Dram DQS Receiver Enable Timing Control Registers
+  BFWrDatDly,       ///< F2x[1, 0]9C_x[302:301, 202:201, 102:101, 02:01] DRAM Write Data Timing [High:Low] Registers
+  BFRdDqsDly,       ///< F2x[1, 0]9C_x[306:305, 206:205, 106:105, 06:05] DRAM Read DQS Timing Control [High:Low] Registers
+  BFWrDqsDly,       ///< F2x[1, 0]9C_x[4A:30] DRAM DQS Write Timing Control Registers
+  BFPhRecDly,       ///< F2x[1, 0]9C_x[51:50] DRAM Phase Recovery Control Register [High:Low] Registers
+  BFRdDqs__Dly,     ///< F2x[1, 0]9C_x0D0F_0[F,8:0]2[3:0]
+  /* Do not define any entries beyond this point */
+  BFAbsLimit                            ///< Beyond this point is reserved for bit field manipulation
+
+} BIT_FIELD_NAME;
+
+/// Bit field aliases
+#define BFMainPllOpFreqId       BFNbFid
+#define BFNbDid                 BFNbPs0NclkDiv
+#define BFRdDramTrainMode       BFPrefDramTrainMode
+#define BFThrottleEn            BFCmdThrottleMode
+#define BFIntlvRegionEn         BFIntLvRgnSwapEn
+#define BFIntlvRegionBase       BFIntLvRgnBaseAddr
+#define BFIntlvRegionLimit      BFIntLvRgnLmtAddr
+#define BFRdOdtPatReg           BFPhyRODTCSLow
+#define BFWrOdtPatReg           BFPhyWODTCSLow
+#define BFLockDramCfg           BFC6DramLock
+#define BFRstRcvFifo            BFTwr
+#define BFDramCmd2Reg           BFCmdBank
+#define BFDramODTCtlReg         BFRdOdtTrnOnDly
+
+/// Bit field names per DRAM CS base address register
+typedef enum {
+  BFCSEnable = 0,               ///< Chip select enable
+  BFSpare = 1,                  ///< Spare rank
+  BFTestFail = 2,               ///< Memory test failed
+  BFOnDimmMirror = 3            ///< on-DIMM mirroring enable
+} CS_BASE_BIT_FIELD;
+
+/// Flag for exclude dimm
+typedef enum {
+  NORMAL,                       ///< Normal mode, exclude the dimm if there is new dimm failure
+  TRAINING,                     ///< Training mode, exclude dimms that fail during training after training is done
+  END_TRAINING                  ///< End training mode, exclude all dimms that failed during training
+} DIMM_EXCLUDE_FLAG;
+
+#define BSP_DIE   0
+#define MAX_NODES_SUPPORTED     8   ///< Maximum number of nodes in the system.
+#define MAX_CS_PER_CHANNEL      8   ///< Max CS per channel
+#define MAX_CS_PER_DELAY        2   ///< Max Chip Select Controlled by a set of delays.
+#define MAX_BYTELANES 8   ///< 8 byte lanes
+#define MAX_DELAYS    9   ///< 8 data bytes + 1 ECC byte
+#define MAX_DIMMS     4   ///< 4 DIMMs per channel
+
+#define VDDIO_DETERMINED      0xFF  ///< VDDIO has been determined yet. Further processing is not needed.
+
+///
+/// MEM_SHARED_DATA
+/// This structure defines the shared data area that is used by the memory
+/// code to share data between different northbridge objects. Each substructure
+/// in the data area defines how this data area is used by a different purpose.
+///
+/// There should only be one instance of this struct created for all of the memory
+/// code to use.
+///
+typedef struct _MEM_SHARED_DATA {
+
+  // System memory map data
+  UINT32  CurrentNodeSysBase;       ///< Base[47:16] (system address) DRAM base address for current node.
+  /// Memory map data for each node
+  BOOLEAN AllECC; ///< ECC support on the system
+  DIMM_EXCLUDE_FLAG DimmExcludeFlag;  ///< Control the exclude dimm behavior
+  UINT8 VoltageMap; ///< The commonly supported voltage map in the system
+
+  UINT8   TopNode;   ///< Node that has its memory  mapped to TOPMEM/TOPMEM2
+  BOOLEAN C6Enabled; ///< TRUE if   C6  is  enabled
+
+  /// Data structure for NB register table
+  struct {
+    UINT64  FamilyId;               ///< LogicalCpuid.Family
+    UINT32  *NBRegTable;            ///< Pointer to allocated buffer for NBRegTable
+  } NBRegMap[MAX_NODES_SUPPORTED];
+
+  /// Data structure for node map
+  struct {
+    BOOLEAN IsValid;                ///< TRUE if this node contains memory.
+    UINT32  SysBase;                ///< Base[47:16] (system address) DRAM base address of this node.
+    UINT32  SysLimit;               ///< Base[47:16] (system address) DRAM limit address of this node.
+  } NodeMap[MAX_NODES_SUPPORTED];
+  BOOLEAN UndoHoistingAbove1TB;     ///< Undo hoisting above 1TB
+
+  /// Data structure for node interleave feature
+  struct {
+    BOOLEAN IsValid;                ///< TRUE if the data in this structure is valid.
+    UINT8   NodeCnt;                ///< Number of nodes in the system.
+    UINT32  NodeMemSize;            ///< Total memory of this node.
+    UINT32  Dct0MemSize;            ///< Total memory of this DCT 0.
+    UINT8   NodeIntlvSel;           ///< Index to each node.
+  } NodeIntlv;
+} MEM_SHARED_DATA;
+
+///
+/// MEM_MAIN_DATA_BLOCK
+///
+typedef struct _MEM_MAIN_DATA_BLOCK {
+  struct _MEM_DATA_STRUCT *MemPtr;          ///< Pointer to customer shared data
+  struct _MEM_NB_BLOCK    *NBPtr;           ///< Pointer to array of NB Blocks
+  struct _MEM_TECH_BLOCK  *TechPtr;         ///< Pointer to array of Tech Blocks
+  struct _MEM_SHARED_DATA *mmSharedPtr;     ///< Pointer to shared data area.
+  UINT8           DieCount;                 ///< Total number of Dies installed
+} MEM_MAIN_DATA_BLOCK;
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+node: Indicates the Node
+- Value ranges from 0-7, 0xF: for all nodes
+- Size - 4 Bits
+
+dct: Indicate the DRAM Controller
+- Value is 0, 1 (0xF: apply setting to all DCTs)
+- Size - 4 Bits
+
+dimm: This values specifies which DIMM register will be applied
+- The value varies from 0 to 3, 0xF: all DIMMs
+- Size - 4 Bits
+
+attr - Indicates if the value needs to be added, subtracted, overridden or Auto (not changed)
+- 0: Do not change the current value in the register
+- 1: Use the value provided in the table to override the current value in the register (the one that AGESA initially determined)
+- 2: Add the value provided in the table as an offset to the current value in the register (the one that AGESA initially determined)
+- 3: Subtract the value provided in the table as an offset to the current value in the register (the one that AGESA initially determined)
+- Size - 2 Bits
+
+time - Indicate the timing for the register which is written.
+- 0:  Write register value before Dram init
+- 1:  Write register value before memory training
+- 2:  Write register value after memory training
+- Size - 1 Bits
+
+bytelane: bytelane number
+- This determines specifies which bytelane register will be applied
+- Bit0 =1 - set value into Bytelane0
+- Bit1 =1 - set value into Bytelane1
+- Bit2 =1 - set value into Bytelane2
+...
+...
+- 0xFFFF: all bytelane
+- Size - 16 Bits.
+
+bfIndex: Indicate the bitfield index
+- Size - 16 Bits
+
+value - Value to be used
+- This can be an offset (sub or Add) or an override value.
+- Size - DWORD
+*/
+
+// Sample code
+// NBACCESS (MTBeforeDInit, MTNodes,  MTDct0, BFCSBaseAddr5Reg, MTOverride,   0x400001),
+// NBACCESS (MTBeforeTrn,   MTNodes,  MTDct1, BFCSBaseAddr7Reg, MTOverride,   0xFFFFFFFF),
+// DQSACCESS (MTAfterTrn,    MTNodes,  MTDcts, MTDIMM0,  MTBL1+MTBL2,    BFRcvEnDly, MTSubtract,   2),
+// DQSACCESS (MTAfterTrn,    MTNodes,  MTDct1, MTDIMM1,  MTBLNOECC,      BFRcvEnDly, MTAdd,        1),
+
+#define ENDMEMTDS  0, 0, 0, 0, 0, 0, 0xFFFFFFFF, 0
+
+#define NBACCESS(time, node, dct, bitfield, attr, value) \
+{ (time), \
+  ((node) & 0x0F) | ((dct) << 4), \
+  (((attr) & 0x07) << 4) | (VT_MSK_VALUE << 7) , \
+  (UINT8)((bitfield) & 0x000000FF), \
+  (UINT8)(((bitfield) >> 8)  & 0x000000FF), \
+  (UINT8)(((bitfield) >> 16) & 0x000000FF), \
+  (UINT8)(((bitfield) >> 24) & 0x000000FF), \
+  0, 0, \
+  (UINT8)((value) & 0x000000FF), \
+  (UINT8)(((value) >> 8)  & 0x000000FF), \
+  (UINT8)(((value) >> 16) & 0x000000FF), \
+  (UINT8)(((value) >> 24) & 0x000000FF), \
+  0, 0, 0 \
+}
+
+#define DQSACCESS(time, node, dct, dimm, bitfield, attr, b0, b1, b2, b3, b4, b5, b6, b7, b8) \
+{ (time), \
+  ((node) & 0x0F) | ((dct) << 4), \
+  (((dimm) & 0x0F)  | ((attr) & 0x07) << 4) | (VT_ARRAY << 7) , \
+  (UINT8)((bitfield) & 0x000000FF), \
+  (UINT8)(((bitfield) >> 8)  & 0x000000FF), \
+  (UINT8)(((bitfield) >> 16) & 0x000000FF), \
+  (UINT8)(((bitfield) >> 24) & 0x000000FF), \
+  (b0), (b1), (b2), (b3), (b4), (b5), (b6), (b7), (b8) \
+}
+
+#define DQS__ACCESS(time, node, dct, dimm, bitfield, attr, l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18) \
+{ (time), \
+  ((node) & 0x0F) | ((dct) << 4), \
+  (((dimm) & 0x0F)  | ((attr) & 0x07) << 4) | (VT_ARRAY << 7) , \
+  (UINT8)((bitfield) & 0x000000FF), \
+  (UINT8)(((bitfield) >> 8)  & 0x000000FF), \
+  (UINT8)(((bitfield) >> 16) & 0x000000FF), \
+  (UINT8)(((bitfield) >> 24) & 0x000000FF), \
+  (l0, (l1), (l2), (l3), (l4), (l5), (l6), (l7), (l8), (l9), (l10), (l11), (l12), (l13), (l14), (l15), (l16), (l17), (l18) \
+}
+/// Type of modification supported by table driven support.
+typedef enum {
+  MTAuto,                       ///<  Do not change the current value in the register
+  MTOverride,                   ///<  Use the value provided in the table to override the current value in the register
+  MTSubtract,                   ///<  Subtract the value provided in the table as an offset to the current value in the register
+  MTAdd,                         ///<  Add the value provided in the table as an offset to the current value in the reg
+  MTAnd,                         ///<  And the value provided in the table as an offset to the current value in the reg
+  MTOr                         ///<  Or the value provided in the table as an offset to the current value in the reg
+} MTAttr;
+
+/// Time for table driven support to make modification.
+/// NOTE please keep the order of below MT points
+typedef enum {
+  MTBeforeInitializeMCT = 0,        ///<  00 Before InitializeMCT
+  MTAfterAutoCycTiming,             ///<  01 After Auto Cycle Timing
+  MTAfterPlatformSpec,              ///<  02 After Platform Specific Configuration
+  MTBeforeDInit,                    ///<  03 Before Dram init
+  MTBeforeTrn,                      ///<  04 Before memory training
+  MTAfterMemPstate1PartialTrn,      ///<  05 After partial training at starting frequency
+  MTAfterTrn,                       ///<  06 After memory training
+  MTAfterSwWLTrn,                   ///<  07 After SW Based WL Training
+  MTAfterHwWLTrnP1,                 ///<  08 After HW Based WL Training Part 1
+  MTAfterHwRxEnTrnP1,               ///<  09 After HW Based Receiver Enable Training Part 1
+  MTAfterFreqChg,                   ///<  10 After each frequency change
+  MTAfterHwWLTrnP2,                 ///<  11 After HW Based WL Training Part 2
+  MTAfterHwRxEnTrnP2,               ///<  12 After HW Based Receiver Enable Training Part 2
+  MTAfterSwRxEnTrn,                 ///<  13 After SW Based Receiver Enable Training
+  MTAfterDqsRwPosTrn,               ///<  14 After DQS Read/Write Position Training
+  MTAfterMaxRdLatTrn,               ///<  15 After Max Read Latency Training
+  MTAfterNbPstateChange,            ///<  16 After programming NB Pstate dependent registers
+  MTAfterInterleave,                ///<  17 After Programming Interleave registers
+  MTAfterSettingMemoryPstate1,      ///<  18 After programming registers for memory pstate 1
+  MTAfterFinalizeMCT,               ///<  19 After Finalize MCT Programming
+
+  MTValidTimePointLimit,        ///< Mark the upper bound of the supported time points
+  MTEnd = 0xFF ///< End of enum define.
+} MTTime;
+
+/// Node on which modification should be made by table driven support.
+typedef enum {
+  MTNode0, ///< Node 0.
+  MTNode1, ///< Node 1.
+  MTNode2, ///< Node 2.
+  MTNode3, ///< Node 3.
+  MTNode4, ///< Node 4.
+  MTNode5, ///< Node 5.
+  MTNode6, ///< Node 6.
+  MTNode7, ///< Node 7.
+  MTNodes = 0xF                   ///<  all nodes
+} MTNode;
+
+/// DCT on which modification should be made by table driven support.
+typedef enum {
+  MTDct0, ///< DCT 0.
+  MTDct1, ///< DCT 1.
+  MTDcts = 0x7,                   ///<  all dcts
+} MTDct;
+
+/// Dimm on which modification should be made by table driven support.
+typedef enum {
+  MTDIMM0, ///< Dimm 0.
+  MTDIMM1, ///< Dimm 1.
+  MTDIMM2, ///< Dimm 2.
+  MTDIMM3, ///< Dimm 3.
+  MTDIMMs = 0xF,                  ///<  all Dimms
+} MTDIMM;
+
+/// Bytelane on which modification should be made by table driven support.
+typedef enum {
+  MTBL0 = 0x1,                    ///<  set the value into Bytelane0
+  MTBL1 = 0x2,                    ///<  set the value into Bytelane1
+  MTBL2 = 0x4,                    ///<  set the value into Bytelane2
+  MTBL3 = 0x8,                    ///<  set the value into Bytelane3
+  MTBL4 = 0x10, ///< set the value into Bytelane4
+  MTBL5 = 0x20, ///< set the value into Bytelane5
+  MTBL6 = 0x40, ///< set the value into Bytelane6
+  MTBL7 = 0x80, ///< set the value into Bytelane7
+  MTBL8 = 0x100,                  ///<  set the value into ECC
+  MTBLNOECC = 0xFF,               ///<  all Bytelanes except ECC
+  MTBLs = 0xFFFF,                 ///<  all Bytelanes
+} MTBL;
+
+/// Values used to indicate which type of training is being done.
+typedef enum {
+  TRN_RCVR_ENABLE,                     ///< Reciever Enable Training
+  TRN_DQS_POSITION,                    ///< Read/Write DQS Position training
+  TRN_MAX_READ_LATENCY                 ///< Max read Latency training
+} TRAINING_TYPE;
+
+/// Memory Pstate
+typedef enum {
+  MEMORY_PSTATE0,   ///< Memory Pstate 0
+  MEMORY_PSTATE1,   ///< Memory Pstate 1
+} MEM_PSTATE;
+
+/// Memory Pstate Training Stage
+typedef enum {
+  MEMORY_PSTATE_1ST_STAGE = 0xF1,   ///< Memory Pstate processing stage 1, in which full training is done at DDR667
+  MEMORY_PSTATE_2ND_STAGE,          ///< Memory Pstate processing stage 2, in which partial trainig will be done at DDR800 - target speed
+  MEMORY_PSTATE_3RD_STAGE           ///< Memory Pstate processing stage 3, in which full training will be done at target frequency and MaxRdLatency training will start
+} MEM_PSTATE_STAGE;
+
+/// RdDqsDly Retrain status
+typedef enum {
+  RDDQSDLY_RTN_NEEDED = 0xF1,       ///< RdDqsDly retrain may be needed
+  RDDQSDLY_RTN_SUSPEND,             ///< RdDqsDly retrain is suspected
+  RDDQSDLY_RTN_ONGOING              ///< RdDqsDly retrain condition is just detected
+} RDDQSDLY_RTN_STAT;
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+MemAmdFinalize (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+AGESA_STATUS
+MemSocketScan (
+  IN OUT   MEM_MAIN_DATA_BLOCK *mmPtr
+  );
+
+VOID
+SetMemError (
+  IN       AGESA_STATUS  Errorval,
+  IN OUT   DIE_STRUCT *MCTPtr
+  );
+
+VOID
+AmdMemInitDataStructDefRecovery (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID
+SetMemRecError (
+  IN       AGESA_STATUS  Errorval,
+  IN OUT   DIE_STRUCT *MCTPtr
+  );
+
+AGESA_STATUS
+memDefRetSuccess ( VOID );
+
+VOID
+AmdMemFunctionListDef (
+  IN OUT   VOID *pMemData
+  );
+#endif  /* _MM_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/mn.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/mn.h
new file mode 100644
index 0000000000..7b9a86e386
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/mn.h
@@ -0,0 +1,1743 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mn.h
+ *
+ * Common Northbridge
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 55046 $ @e \$Date: 2011-06-15 23:59:07 -0600 (Wed, 15 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+  *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+  *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MN_H_
+#define _MN_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define _4GB_RJ16           (((UINT32) 4) << (30 - 16))
+#define _1TB_RJ16           (((UINT32) 1) << (40 - 16))
+#define HT_REGION_BASE_RJ16 ((UINT32)0x00FD0000)
+
+#define DCT_ACCESS_WRITE (UINT32) 0x40000000
+#define MTRR_VALID  11
+#define THERMAL_OPT 31
+
+#define NB_ACCESS       0
+#define DCT_PHY_ACCESS  1
+#define DCT_EXTRA       2
+
+#define DCT_PHY_DIRECT  0xF1
+
+#define VT_MSK_VALUE 0
+#define VT_ARRAY     1
+/*---------------------------------------------
+ *   TSEFO - Type Start End Function Offset
+ *
+ *   31:30   Type of access        (2-bits)
+ *   29:29   Special               (1-bit)
+ *   28:28   Phy Direct            (1-bit)
+ *   27:27   Whole Register Access (1-bit)
+ *   26:26   Linked                (1-bit)
+ *   25:21   Start bit             (5-bits)
+ *   20:16   End bit               (5-bits)
+ *   15:00   Function_Offset/Index (16-bits)
+ *---------------------------------------------
+ */
+typedef UINT32 TSEFO;
+
+/**
+  MAKE_TSEFO(TableName, a, b, c, d, BitFieldIndex):
+
+  @param[in]    TableName
+  @param[in]    BitFieldIndex
+  @param[in]    a  Type of access.
+  @param[in]    b  Index of register (can be in Function_Offset format).
+  @param[in]    c  Highest bit of the bit field.
+  @param[in]    d  Lowest bit of the bit field.
+
+  @return   TSEFO  Access params encrypted in TSEFO format.
+--*/
+#define MAKE_TSEFO(TableName, a, b, c, d, BitFieldIndex) \
+TableName[BitFieldIndex] = ( \
+  (a == DCT_PHY_DIRECT) ? ( \
+    (((UINT32) DCT_PHY_ACCESS) << 30) | (((UINT32) 1) << 28) | (((UINT32) b) & 0xFFFF) | (\
+      ((c == 15) && (d == 0)) ? ( \
+        (((UINT32) 1) << 27) | (((UINT32) b) & 0xF0000) \
+      ) : ( \
+        (c >= d) ? ( \
+          (((UINT32) c) << 21) | (((UINT32) d) << 16) \
+        ) : ( \
+          (((UINT32) d) << 21) | (((UINT32) c) << 16) \
+        ) \
+      ) \
+    ) \
+  ) : ( \
+    (((UINT32) a) << 30) | (((UINT32) b) & 0xFFFFFFF) | ( \
+      (((UINT32) b) >> 16) ? ( \
+        (((UINT32) 1) << 29) \
+      ) : ( \
+        (c >= d) ? ( \
+          (((UINT32) c) << 21) | (((UINT32) d) << 16) \
+        ) : ( \
+          (((UINT32) d) << 21) | (((UINT32) c) << 16) \
+        ) \
+      ) \
+    ) \
+  ) \
+)
+
+/**
+  LINK_TSEFO(TableName, LowerBitFieldIndex, HigherBitFieldIndex):
+  This is one way link: any write to LowerBitFieldIndex would write to HigherBitFieldIndex,
+                        but NOT the other way around.
+  Requirement: LowerBitFieldIndex must be declared *right* before HigherBitFieldIndex.
+
+  @param[in]    TableName
+  @param[in]    LowerBitFieldIndex
+  @param[in]    HigherBitFieldIndex
+
+  @return   TSEFO  Access params encrypted in TSEFO format.
+--*/
+#define LINK_TSEFO(TableName, LowerBitFieldIndex, HigherBitFieldIndex) { \
+  ASSERT (LowerBitFieldIndex == (HigherBitFieldIndex - 1)) ; \
+  TableName[LowerBitFieldIndex] = TableName[LowerBitFieldIndex] | (((UINT32) 1) << 26); \
+}
+
+// Indicate when a bitfield has multiple memory Pstate copy
+#define MULTI_MPSTATE_COPY_TSEFO(TableName, BitFieldName) \
+  TableName[BitFieldName] = TableName[BitFieldName] | (((UINT32) 1) << 29)
+
+#define TSEFO_TYPE(x)  ((UINT8) (((UINT32) (x) >> 30) & 0x03))
+#define TSEFO_START(x) ((UINT8) (((UINT32) (x) >> 21) & 0x1F))
+#define TSEFO_END(x)   ((UINT8) (((UINT32) (x) >> 16) & 0x1F))
+#define TSEFO_OFFSET(x) ((UINT32) (x) & 0xFFFF)
+#define TSEFO_LINKED(x) ((UINT8) (((UINT32) (x) >> 26) & 0x01))
+#define TSEFO_DIRECT_EN(x) ((UINT8) (((UINT32) (x) >> 28) & 0x01))
+#define TSEFO_WHOLE_REG_ACCESS(x) ((UINT8) (((UINT32) (x) >> 27) & 0x01))
+#define _FN(x, y) (((UINT32) (x) << 12) + (UINT32) (y))
+#define TSEFO_MULTI_MPSTATE_COPY(x) ((UINT8) (((UINT32) (x) >> 29) & 1))
+#define _NOT_USED_ 0
+
+/* */
+#define B0_DLY   0
+#define B1_DLY   1
+#define B2_DLY   2
+#define B3_DLY   3
+#define B4_DLY   4
+#define B5_DLY   5
+#define B6_DLY   6
+#define B7_DLY   7
+#define ECC_DLY  8
+
+#define DDR2_TRAIN_FLOW 0
+#define DDR3_TRAIN_FLOW 1
+
+//
+// Minimum Data Eye width in consecutive 32nds of a UI of
+// valid data
+//
+#define MIN_RD_DATAEYE_WIDTH_NB 4
+#define MIN_WR_DATAEYE_WIDTH_NB 4
+
+//
+// RELIABLE READ/WRITE MODE DEFINITIONS
+//
+#define PRECHARGE_ALL_BANKS 0xFF         ///< Use to specify PrechargeAll Command to Precharge Cmd Function
+#define CMD_TGT_A           0x00         ///< Issue Commands to Command Target A
+#define CMD_TGT_AB          0x01         ///< Issue Commands to Command Targets A and B
+#define CMD_TYPE_READ       0x00         ///< Read Command
+#define CMD_TYPE_WRITE      0x01         ///< Write Command
+#define CMD_TYPE_WR_RD      0x02         ///< Alternating Write and Read Commands
+#define CPG_BANK_ADDRESS_A  0x0          ///< Dimm Bank address used in Reliable RD/RW mode training
+#define CPG_BANK_ADDRESS_B  0x1          ///< Dimm Bank address used in Reliable RD/RW mode training
+#define CPG_ROW_ADDRESS_A   0x0          ///< Dimm Row address used in Reliable RD/RW mode training
+#define CPG_ROW_ADDRESS_B   0x0          ///< Dimm Row address used in Reliable RD/RW mode training
+#define CPG_COL_ADDRESS_A   0x0          ///< Dimm Column address used in Reliable RD/RW mode training
+#define CPG_COL_ADDRESS_B   0x0          ///< Dimm Column address used in Reliable RD/RW mode training
+#define CPG_COMPARE_MASK_LOW 0x00000000  ///< Dram DQMask[31:0] used to mask comparison on reads.  1=ignore
+#define CPG_COMPARE_MASK_HI  0x00000000  ///< Dram DQMask[63:32] used to mask comparison on reads.  1=ignore
+#define CPG_COMPARE_MASK_ECC 0x00        ///< Dram EccMask used to mask comparison on reads.  1=ignore
+#define PRBS_SEED_32        0x062221     ///< Data PRBS Seed
+#define PRBS_SEED_64        0x066665     ///< Data PRBS Seed
+#define PRBS_SEED_128       0x026666     ///< Data PRBS Seed
+#define PRBS_SEED_256       0x044443     ///< Data PRBS Seed
+
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// Structure for Reliable Read/Write Mode Data
+/// These are values that may need to be referenced by the low level functions
+/// during training and are initialized at the begining of a particular type of training.
+typedef struct _RRW_SETTINGS {
+  UINT8 CmdTgt;                          ///< Value to program into CmdTgt
+  UINT8 TgtBankAddressA;                 ///< Target A Bank address
+  UINT32 TgtRowAddressA;                 ///< Target A Row address
+  UINT32 TgtColAddressA;                 ///< Target A Column address
+  UINT8 TgtBankAddressB;                 ///< Target B Bank address
+  UINT32 TgtRowAddressB;                 ///< Target B Row address
+  UINT32 TgtColAddressB;                 ///< Target B Column address
+  UINT32 CompareMaskLow;                 ///< Compare Mask Bits 31:0
+  UINT32 CompareMaskHigh;                ///< Compare Mask Bits 63:32
+  UINT8 CompareMaskEcc;                  ///< Compare Mask Ecc
+  UINT32 DataPrbsSeed;                   ///< PRBS Seed value
+} RRW_SETTINGS;
+
+/// DQS training related delays
+typedef enum {
+  AccessRcvEnDly,                       ///< Receiver enable delay
+  AccessWrDatDly,                       ///< Write data delay
+  AccessRdDqsDly,                       ///< Read DQS delay
+  AccessWrDqsDly,                       ///< Write DQS delay
+  AccessPhRecDly,                       ///< Phase recovery delay
+  AccessRdDqs__Dly                      ///< Read DQS delay
+} TRN_DLY_TYPE;
+
+/// Training patterns for position training
+typedef enum {
+  POS_PATTERN_72B,                      ///< 72 bit pattern
+  POS_PATTERN_256B,                     ///< 256 bit pattern
+} POS_TRN_PATTERN_TYPE;
+
+/// ODT mode
+typedef enum {
+  MISSION_MODE,                         ///< ODT during mission mode
+  WRITE_LEVELING_MODE                   ///< ODT during write leveling
+} ODT_MODE;
+
+/*
+ *   DRBN - Dimm-Rank-Byte-Nibble
+ *   31:12   Reserved
+ *   11:09   Dimm       (3-bits)
+ *   08      Rank       (1-bit)
+ *   07:05   Reserved
+ *   04:01   Byte       (4-bits)
+ *   00      Nibble     (1-bit)
+ */
+typedef UINT32 DRBN;
+#define MAKE_DRBN(dimm, rank, byte, nibble) ((((UINT32) (dimm)) << 9) | (((UINT32) (rank)) << 8) | \
+(((UINT32) (byte)) << 1) | ((UINT32) (nibble)) )
+#define DIMM_BYTE_ACCESS(dimm, byte) ((((UINT32) (dimm)) << 9) | (((UINT32) (byte)) << 1))
+#define CS_NBBL_ACCESS(cs, nibble) ((((UINT32) (cs)) << 8) | ((UINT32) (nibble)))
+#define DIMM_NBBL_ACCESS(dimm, nibble) ((((UINT32) (dimm)) << 9) | ((UINT32) (nibble)))
+#define DRBN_DIMM(x) ((UINT8) (((UINT32) (x) >> 9) & 0x07))
+#define DRBN_RANK(x) ((UINT8) (((UINT32) (x) >> 8) & 0x01))
+#define DRBN_BYTE(x) ((UINT8) (((UINT32) (x) >> 1) & 0x0F))
+#define DRBN_NBBL(x) ((UINT8) (((UINT32) (x)) & 0x01))
+#define DRBN_DIMM_NBBL(x) ((UINT8) (((UINT32) (x)) & 0x1F))
+
+/* Dimm Type mask */
+#define DT_X4       0x01
+#define DT_X8       0x02
+#define DT_X16      0x04
+#define DT_SR       0x10
+#define DT_DR       0x20
+#define DT_QR       0x40
+
+#define DT_ANY_X4   0x71
+#define DT_ANY_X8   0x72
+#define DT_ANY_X16  0x74
+#define DT_ANY_SR   0x17
+#define DT_ANY_DR   0x27
+#define DT_ANY_QR   0x47
+#define DT_ANY_SR_DR    (DT_ANY_SR | DT_ANY_DR)
+#define DT_ANY          (DT_ANY_SR | DT_ANY_DR | DT_ANY_QR)
+
+/// Delay Scaling Info Struct - Describes number of delay increments per UI of a delay type
+///
+typedef struct _TRN_DLY_PARMS {
+  UINT8  Min;    ///< Minimum Value
+  UINT8  Max;    ///< Maximum Value
+  UINT8  Mask;   ///< Mask to be applied (i.e. 0xFF if adjustable by one, 0xFE if adjustable by 2, etc.)
+} TRN_DLY_PARMS;
+
+/// Structure for certain data saving needed for DCT.
+typedef struct {
+  UINT8  RcvEnDlyCounts[8]; ///< DQS Receiver Enable Delay counts
+  UINT32 PhRecReg[3];     ///< 3 Phase recovery control registers
+  BOOLEAN Is__x4;         ///< Check if training is enabled and x4 DIMMs are installed
+} MEM_DCT_CACHE;
+
+/// Structure for table driven support.
+typedef struct _MEM_TBL_ALIAS {
+  UINT8  time;            ///< Modification time.
+  UINT8  node:4;          ///< Node on which to make modification.
+  UINT8  dct:4;           ///< DCT on which to make modification.
+  UINT8  dimm:4;          ///< Dimm on which to make modification.
+  UINT8  attr:3;          ///< Attribute of modification.
+  UINT8  vtype:1;         ///< Flag indicating value type.
+  UINT32 bfindex;         ///< Bit field index that need to be modified.
+  union {                 ///< Union is defined to easy select between single and multiple bytelane cases.
+    struct {              ///< Sub-struct used for one bytelane value.
+      UINT16 bytelane:16; ///< Bytelane on which to make modification.
+      UINT32 value;       ///< Modified value.
+      UINT8 reserved[3];  ///< Reserved for this purpose
+    } s;                  ///< single value to one or multiple bytelanes
+    UINT8 bytelanevalue[9]; ///< Array to specify individual bytelane values
+  } data;
+} MEM_TABLE_ALIAS;
+
+/// Structure for Platform Specific Block.
+typedef struct _MEM_PS_BLOCK {
+  UINT8 DramTerm; ///< Dram Term
+  UINT8 QR_DramTerm; ///< Dram Term for QR
+  UINT8 DynamicDramTerm; ///< Dynamic Dram Term
+  UINT8 NumOfReg[MAX_DIMMS_PER_CHANNEL]; ///< Number of registers on each RDIMM (From SPD)
+  UINT8 MR0WR;  ///< MR0WR
+  UINT8 MR0CL31;  ///< MR0[CL][3:1]
+  UINT8 MR0CL0;  ///< MR0CL[0]
+  UINT8 RttNom[8];  ///< RttNom value for maximum 8 chipsels per channel
+  UINT8 RttWr[8];  ///< RttWr value for maximum 8 chipsels per channel
+  UINT8 F0RC8;  ///< F0RC8
+  UINT8 F1RC0;  ///< F1RC0
+  UINT8 F1RC1;  ///< F1RC1
+  UINT8 F1RC2;  ///< F1RC2
+  UINT8 RC10OpSpd;  ///< RC10[OperatingSpeed]
+  UINT8 LrdimmRowAddrBits[MAX_DIMMS_PER_CHANNEL]; ///< Effective Row address bits used by LRDIMMS
+  UINT16 SpeedLimit[VOLT1_25_ENCODED_VAL + 1];  ///< SpeedLimit of individual VDDIO
+  UINT8 WLSeedVal;  ///< Seed value of WL training extracted from PSC table
+  UINT16 HWRxENSeedVal;  ///< Seed value of HW RxEn training extracted from PSC table
+
+  /* PUBLIC functions */
+  BOOLEAN (*MemPDoPs) (struct _MEM_NB_BLOCK *NBPtr); ///< Function that gets Form factor info.
+  VOID (*MemPGetPORFreqLimit) (struct _MEM_NB_BLOCK *NBPtr); ///< Function that gets the speed limit of a dimm population.
+  BOOLEAN (*MemPGetPass1Seeds) (struct _MEM_NB_BLOCK *NBPtr); ///< Function that gets pass1 seeds of WL and RxEn training.
+} MEM_PS_BLOCK;
+
+/// Structure parameters needed in frequency change of client NB.
+typedef struct _MEM_FREQ_CHANGE_PARAM {
+  UINT16 PllLockTimeDefault; ///< Default PllLockTime
+  UINT8  RdPtrInit667orHigher; ///< RdPtrInit for frequency 667MHz and higher
+  UINT8  RdPtrInitLower667; ///< RdPtrInit for frequency lower than 667MHz
+  UINT8  NclkPeriodMul2x; ///< Multiplier for NclkPeriod in parial sum calculation x 2
+  UINT8  MemClkPeriodMul2x; ///< Multiplier for MemClkPeriod in parial sum calculation x 2
+  UINT8  SyncTimeMul4x;         ///< Multiplier for SyncTime
+  UINT16 TDataProp800orHigher;  ///< TDataProp for frequency 800MHz or higher
+  UINT16 TDataPropLower800;     ///< TDataProp for frequency lower than 800MHz
+} MEM_FREQ_CHANGE_PARAM;
+
+/// List for NB items that are supported
+typedef enum {
+  SetSpareEn,                      ///< Sets spare enable
+  CheckSpareEn,                    ///< Spare enabled
+  SetDllShutDown,                  ///< Sets DllShutDown
+  CheckEccDLLPwrDnConfig,          ///< Checks to determine if EccDLLPwrDnConf needs to be adjusted
+  DimmBasedOnSpeed,                ///< Checks to determine if Dimm number needs to be adjusted based on speed
+  CheckMaxDramRate,                ///< Checks to determine the maximum rate
+  Check1GAlign,                    ///< Checks to determine if 1 GB alignment is supported
+  DramModeBeforeDimmPres,          ///< Check to determine if DRAM mode needs to be set before dimm presence
+  DramModeAfterDimmPres,           ///< Check to determine if DRAM mode needs to be set after dimm presence
+  CheckClearOnDimmMirror,          ///< Check to determine if we need to clear on DIMM mirror
+  CheckDisDllShutdownSR,           ///< Check to determine if DisDllShutdown needs to be set
+  CheckMemClkCSPresent,            ///< Check to determine if chipselect needs to be set based on disabled memclocks
+  CheckChangeAvgValue,             ///< Check to determine if we need to change average value
+  CheckMaxRdDqsDlyPtr,             ///< Check to determine change Max Rd Dqs Delay
+  CheckPhyFenceTraining,           ///< Check to determine if we need to Phy Fence training
+  CheckGetMCTSysAddr,              ///< Check to determine if we need to GetMCTSysAddr
+  CheckSendAllMRCmds,              ///< Check to determine if we need to SendAllMRCmds
+  CheckFindPSOverideWithSocket,    ///< Check to determine if we need to Find PSOveride With Socket
+  CheckFindPSDct,                  ///< Check to determine if we need to Find PSOveride With DCT
+  CheckODTControls,                ///< Check to determine if we need to set ODT controls
+  CheckDummyCLRead,                ///< Check to determine if an extra dummy read is required
+  CheckDllStdBy,                   ///< Check to determine if setting DLL stand by is required
+  CheckSlewWithMarginImprv,        ///< Check to determine if setting of Slew With MarginImprv is required
+  CheckSlewWithoutMarginImprv,     ///< Check to determine if setting of Slew Without MarginImprv is required
+  CheckDllSpeedUp,                 ///< Check to determine if setting of Dll SpeedUp is required
+  CheckDllRegDis,                  ///< Check to determine if setting of DLL Regulator Disable is required
+  FenceTrnBeforeDramInit,          ///< Check to determine if fence training has been done before Dram init
+  WLSeedAdjust,                    ///< Check to determine if WL seed needs to be adjusted
+  UnifiedNbFence,                  ///< Check to determine if Phy fence is of Unified NB
+  AdjustTwr,                       ///< Check to determine if Twr needs to be adjusted
+  ChannelPDMode,                   ///< Check to determine if channel power down mode is the only that is supported
+  ForceEnMemHoleRemapping,         ///< Check to determine if we need to force enabling memory hole remapping
+  AdjustTrdrdSD,                   ///< Check to determine if we need to adjust TrdrdSD
+  ReverseMaxRdLatTrain,            ///< Check to determine if reverse (pass to fail) algorithm is supported for MaxRdLat training
+  SkipErrTrain,                    ///< Check to determine if skip error training is supported
+  DramSrHys,                       ///< Check to determine if DRAM SR hysteresis is supported
+  PchgPDMode,                      ///< Check to determine if Precharge powerdown mode is supported
+  EccByteTraining,                 ///< Check to determine if DRAM ECC Byte training
+  CheckDrvImpCtrl,                 ///< Check to determine if we need to set DrvImpCtrl
+  CheckDramTerm,                   ///< Check to determine if we need to set DramTerm
+  CheckDramTermDyn,                ///< Check to determine if we need to set DramTermDyn
+  CheckQoff,                       ///< Check to determine if we need to set Qoff
+  CheckSetSameDctODTsEn,           ///< Check to defermine if we need to set "ODTsEn" the same on each DCT
+  WLNegativeDelay,                 ///< Check to determine if the NB can tolerate a negtive WL delay value
+  SchedDlySlot1Extra,              ///< Check to determine if DataTxSchedDly Slot1 equation in slowMode to subtract an extra MEMCLK
+  TwoStageDramInit,                ///< Check to determine if we need to seperate Draminit into 2 stages. The first one processes info on all nodes. The second one does Dram Init.
+  ExtraPclkInMaxRdLat,             ///< Check to determine if an extra PCLK is needed for MaxRdLat
+  CsrPhyPllPdEn,                   ///< Check to determine if CSR Phy PLL Powerdown is enabled or not
+  AdjustTrc,                       ///< Check to determine if we need to adjust Trc
+  ProgramCsrComparator,            ///< Check to determine if we need to program CsrComparator with the same value as D18F2x09C_x0D0F_0[7:0]1F[RxVioLvl]
+  EnProcOdtAdvForUDIMM,            ///< Check to determine if we need to always enable ProcOdtAdv for UDIMM
+  SetTDqsForx8DimmOnly,            ///< Only set MR1[TDQS] for x8 DIMMs when x4 and x8 DIMMs are both present on a channel
+  WlRttNomFor1of3Cfg,              ///< Set Rtt_Nom = Rtt_Wr in one of three DIMMs per channel configurations
+  PerformanceOnly,                 ///< Only support performance policy, does not support battery life policy
+  AdjustTrp,                       ///< Check to determin if Trp needs to be adjusted
+  DllStaggerEn,                    ///< Check to determin if Dll Stagger should be turned on
+
+  EnumSize                         ///< Size of list
+} NB_SUPPORTED;
+
+/// List for family specific functions that are supported
+typedef enum {
+  BeforePhyFenceTraining,          ///< Family specific tasks before Phy Fence Training
+  BeforeMemClkFreqVal,             ///< hook before setting MemClkFreqVal bit
+  AfterMemClkFreqVal,              ///< Override PllMult and PllDiv
+  OverridePllMult,                 ///< Override PllMult
+  OverridePllDiv,                  ///< Override PllDiv
+  BeforeMemClr,                    ///< Before MemClr
+  SendMrsCmdsPerCs,                ///< Send MRS commands per CS
+  SetupHwTrainingEngine,           ///< Setup Hardware training engine for specific training type
+  OverrideRcvEnSeed,               ///< Override seed for hardware based RcvEn training
+  AddlMaxRdLatTrain,               ///< Perform additional MaxRdLat training if needed
+  ForceAutoComp,                   ///< Force Auto Comp
+  DetectMemPllError,               ///< Detect MemPll Divide by 3 bug
+  ReEnablePhyComp,                 ///< Re-Enable Phy Compensation after RcvEn Training
+  ExtractWLODT,                    ///< Extract WL ODT value thr given ODT pattern
+  DCTSelectSwitch,                 ///< Select DCT when we switch DCT
+  ScrubberErratum,                 ///< Erratum for setting scrubber rate
+  MR0_PPD,                         ///< Override MR0[PPD]
+  GetDdrMaxRate,                   ///< Interpret DdrMaxRate with Familiy-specific encoding
+  ExitPhyAssistedTraining,         ///< Perform family specific tasks when exiting phy assisted training
+  AfterSaveRestore,                ///< Action after save/restore execution
+  OverrideDataTxFifoWrDly,         ///< Override DataTxFifoWrDly based on training result of WrDatDly
+  OverrideRcvEnSeedPassN,          ///< Override seed for hardware based RcvEn training where N greater than 0
+  AfterMemClkFreqChg,              ///< Reprogram DIMMs' buffers after MEMCLK frequency change
+  AdjustTxpdll,                    ///< Adjust Txpdll value to encoded register value
+  CalcWrDqDqsEarly,                ///< Calculate WrDqDqsEarly
+  TrainWlPerNibble,                ///< Train Write Leveling per nibble
+  TrainWlPerNibbleAdjustWLDly,     ///< Train WL per nibble and adjust the WL delay
+  TrainWlPerNibbleSeed,             ///< Save the seed for WL nibble based training
+  TrainRxEnPerNibble,              ///< Train Rx Enable Training per nibble
+  TrainRxEnAdjustDlyPerNibble,     ///< Train Rx Enable Training nibble and adjust the RxEn delay
+  TrainRxEnGetAvgDlyPerNibble,     ///< Display Rx Enable Training average nibble value for each BL
+  InitPerNibbleTrn,                ///< Initiates Per Nibble Training.
+  BeforeSetCsTri,                  ///< Modify CS tri-state bit map.
+  ForceRdDqsPhaseB,                ///< Force RdDqsDly to phase B
+  SetDqsODT,                       ///< Set DQS ODT
+  DisLowPwrDrvStr,                 ///< Hook to skip setting LowPowerDriveStrengthEn
+  AdjustRdDqsDlyOffset,            ///< Adjust the bit offset of the RdDqsDly Bit Bitfield before writing and after reading
+  ResetRxFifoPtr,                  ///< Reset RxFifo pointer during Read DQS training
+  EnableParityAfterMemRst,         ///< Enable DRAM Address Parity after memory reset.
+  FinalizeVDDIO,                   ///< Finalize VDDIO
+  TrainingNibbleZero,              ///< Check for see Nibble zero is being trained (individually or with x8 training)
+  ProgOdtControl,                  ///< Calculate RdOdtTrnOnDly and RdOdtOnDuration
+  SetSkewMemClk,                   ///< Set SkewMemClk
+  OverrideWLSeed,                  ///< Override WL seed
+  ForcePhyToM0,                    ///< Force Phy to M0
+  AdjustCSIntLvLowAddr,            ///< Adjust CS interleaving low address
+  Adjust2DVrefStepSize,            ///< Adjusts the step size for Vref during RdDqs training
+  Adjust__RdDqsStepSize,           ///< Adjusts the step size for RdDqs during RdDqs training
+  ReleaseNbPstate,                 ///< Release NB P-state
+  InitializeRxEnSeedlessTraining,  ///< Initializes RxEn Seedless Training
+  TrackRxEnSeedlessRdWrNoWindBLError,           ///< Track Bytelane Errors resulting from No window for RxEn Seedless Training
+  TrackRxEnSeedlessRdWrSmallWindBLError,        ///< Track Bytelane Errors resulting from Small window for RxEn Seedless Training
+  InitialzeRxEnSeedlessByteLaneError,           ///< Initializes ByteLaneError to False for RxEn Seedless Training
+  InitExtMMIOAddr,                 ///< Initializes extended MMIO address space
+  MemPstateStageChange,            ///< handle training when multiple memory pstate is supported
+  ProgramFence2RxDll,              ///< program RxDll in a different register
+  RdDqsDlyRestartChk,              ///< Check to see if we need to restart RdDqsDly
+  BeforeWrDatTrn,                  ///< Check to see if special handling is needed before WrDatDly Training
+  ForceLvDimmVoltage,              ///< Force LVDIMM voltage to 1.5V
+  BfAfExcludeDimm,                 ///< Workaround before and after excluding dimms
+  AdjustWrDqsBeforeSeedScaling,    ///< For some family, negative WL is compensated and WrDqs needs to be adjusted before seed scaling
+  OverridePrevPassRcvEnDly,        ///< Check to determine if we need override PrevPassRcvEnDly
+  AdjustRdPtrInit,                 ///< Adjust RdPtrInit value according to certain conditions
+  Adjust2DPhaseMaskBasedOnEcc,     ///< Adjusts the Phase Mask Based on ECC
+  FixupSysAddr,                    ///< Adjust physical address before identifying DIMM.
+  RegAccessFence,                  ///< Make sure previous phy registers writes are done
+
+  NumberOfHooks                    ///< Size of list
+} FAMILY_SPECIFIC_FUNC_INDEX;
+
+///< Entry for SPD Timing
+typedef struct {
+  BIT_FIELD_NAME BitField;  ///< Bit field name of the timing
+  UINT8 Min; ///< Minimum value for timing
+  UINT8 Max; ///< Maximum value for timing
+  UINT8 Bias; ///< Bias from actual value
+  UINT8 Ratio_x2; ///< Actual value will be multiplied by (Ratio_x2/2)
+} CTENTRY;
+
+/// Structure for northbridge block.
+typedef struct _MEM_NB_BLOCK {
+  MEM_DATA_STRUCT *MemPtr; ///< Point to MEM_DATA_STRUCT.
+  MEM_PARAMETER_STRUCT *RefPtr; ///< Point to MEM_PARAMETER_STRUCT.
+  DIE_STRUCT *MCTPtr;             ///< point to current Node's MCT struct
+  DCT_STRUCT *DCTPtr;             ///< point to current Node's DCT struct
+  DCT_STRUCT *AllDCTPtr;          ///< point to all Node's DCT structs
+  CH_DEF_STRUCT *ChannelPtr;       ///< point to current channel data
+  SPD_DEF_STRUCT *SPDPtr; ///< Point to SPD data for current DCT.
+  struct _MEM_TECH_BLOCK *TechPtr; ///< point to technology block.
+  struct _MEM_FEAT_BLOCK_NB *FeatPtr; ///< point to NB Specific feature block.
+  struct _MEM_SHARED_DATA *SharedPtr;     ///< Pointer to Memory scratchpad area
+  struct _MEM_NB_BLOCK    *AdjacentDieNBPtr;     ///< Pointer to Adjacent Die In same socket
+  BOOLEAN  DieEnabled[MAX_NODES_SUPPORTED];///< Indicates the Dies that are enabled
+  SPD_DEF_STRUCT *AllNodeSPDPtr; ///< Point to SPD data for the system.
+  DIE_STRUCT *AllNodeMCTPtr;      ///< point to all Node's MCT structs
+  UINT8 DimmToBeUsed; ///< Dimm to be used in recovery mode.
+  MEM_PS_BLOCK *PsPtr; ///< point to platform specific block
+  MEM_PS_BLOCK *PSBlock; ///< point to the first platform specific block on this node.
+  MEM_FREQ_CHANGE_PARAM *FreqChangeParam; ///< pointer to parameter of frequency change.
+
+  PCI_ADDR PciAddr;                ///< PCI address for this node
+  TSEFO *NBRegTable;               ///< contains all bit field definitions
+
+  UINT8 Node; ///< current node.
+  UINT8 Dct; ///< current DCT.
+  UINT8 Channel; ///< current channel.
+  UINT8 DctCount; ///< number of DCTs on the current NB.
+  UINT8 ChannelCount; ///< number of channels per DCT of the current NB.
+  UINT8 NodeCount; ///< number of Nodes supported
+  BOOLEAN Ganged; ///< mode for current MCT controller.
+  POS_TRN_PATTERN_TYPE PosTrnPattern; ///< specifies the pattern that should be used for position training.
+  BOOLEAN MemCleared; ///< memory clear flag.
+  UINT32  CPGInit; ///< continuous pattern generation flag.
+  UINT16  StartupSpeed; ///< startup speed for DDR3.
+  UINT16  RcvrEnDlyLimit; ///< maximum value that RcvrEnDly field can take.
+  UINT32 McaNbCtlReg; ///< reserve MCA reports.
+  UINT32 VarMtrrHiMsk;   ///< variable MTRR mask for upper 32 bits.
+  UINT32 CsRegMsk;       ///< mask for CS base register
+  UINT32 NBClkFreq; ///< Current NB Clock frequency
+  UINT8  DefDctSelIntLvAddr; ///< Default DctSelIntLvAddr
+  UINT8  TrainingSequenceIndex; ///< Index into the Training Sequence
+  RRW_SETTINGS RrwSettings;  ///<Settings for Reliable Read/Write mode
+  UINT8 TotalRdDQSDlyRange;   ///< Max number of RdDQS Delays
+  INT16 MinRxEnSeedGross; ///< Minimum value of the Receiver Enable
+  INT16 MaxRxEnSeedTotal; ///< Maximum value of the Receiver Enable
+  UINT8 TotalMaxVrefRange;       ///< Max number of Vref settings
+  UINT8 MaxSeedCount; ///< Max number of Data patterns to be generated
+  UINT8 Vref;            ///< Vref setting
+  UINT8 RdDqsDly;        ///< RdDQSDly setting
+  UINT16 MaxFreqVDDIO[VOLT1_25 + 1]; ///< Max Frequency each voltage supports.
+  UINT32 PhaseLaneMask;   ///< Lane Mask for Inphase and 180 phase registers
+  UINT8 MaxDiamondStep;  ///< Maximum Diamond step Size
+  UINT8 CurrentAggressorCSTarget[MAX_CHANNELS_PER_SOCKET]; ///< Current Aggressor CS targeted
+  UINT8 MaxAggressorCSEnabled[MAX_CHANNELS_PER_SOCKET]; ///< Maximum Number of Aggressor CS targeted
+  UINT8 MaxAggressorDimms[MAX_CHANNELS_PER_SOCKET];  ///< Maximum Number of Aggressor CS DIMMs
+  UINT8 InitialAggressorCSTarget[MAX_CHANNELS_PER_SOCKET];  ///< Initial Number of the first CS Aggressor
+  BOOLEAN OrigDisAutoRefreshState; ///< Original state of Dis Auto Refresh
+  BOOLEAN Execute1dMaxRdLatTraining;    ///< Indicates if 1D training should be executed
+  BOOLEAN Override__Training;                  ///< training has been overriden
+
+  MEM_DCT_CACHE DctCache[MAX_CHANNELS_PER_SOCKET]; ///< Allocate space for MCT_DCT_CACHE.
+  MEM_DCT_CACHE *DctCachePtr;    ///< pointer to current Node's Node struct
+
+  /* Temporary storage */
+  BOOLEAN   ClToNbFlag;        ///< is used to restore ClLinesToNbDis bit after memory
+  UINT8     NbFreqChgState;    ///< is used as a state index in NB frequency change state machine
+  UINT32    NbPsCtlReg;        ///< is used to save/restore NB Pstate control register
+  MEM_PSTATE MemPstate;        ///< is used to save current memory Pstate context
+  MEM_PSTATE_STAGE MemPstateStage; ///< is used to save the current stage status of memory pstate
+  RDDQSDLY_RTN_STAT   RdDqsDlyRetrnStat;    ///< is used to check if RdDqsDly training needs to be restarted
+  CONST UINT32 *RecModeDefRegArray;   ///< points to an array of default register values that are set for recovery mode
+
+  ///< Determines if code should be executed on a give NB
+  BOOLEAN IsSupported[EnumSize];
+  BOOLEAN (*FamilySpecificHook[NumberOfHooks]) (struct _MEM_NB_BLOCK *NBPtr, VOID *OptParam);   ///< This array of pointers point to
+                                                                                                ///< family specific functions.
+
+  /* PUBLIC functions */
+  VOID (*SwitchDCT) (struct _MEM_NB_BLOCK *NBPtr, UINT8 DCT); ///< Switch to current DCT.
+  VOID (*SwitchChannel) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Channel); ///< Switch to current channel.
+  VOID (*SetMaxLatency) (struct _MEM_NB_BLOCK *NBPtr, UINT16 MaxRcvEnDly); ///< Set Max Rd Latency.
+  VOID (*getMaxLatParams) (struct _MEM_NB_BLOCK *NBPtr, UINT16 MaxDlyForMaxRdLat, UINT16 *MinDly, UINT16 *MaxDly, UINT16 *DlyBias); ///< retrieves the Max latency parameters.
+  BOOLEAN (*GetSysAddr) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Receiver, UINT32 *Addr); ///< Get system address for training dimm.
+  BOOLEAN (*RankEnabled) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Receiver); ///< Check if a rank has been enabled.
+  BOOLEAN (*InitializeMCT) (struct _MEM_NB_BLOCK *NBPtr); ///< MCT initialization.
+  BOOLEAN (*FinalizeMCT) (struct _MEM_NB_BLOCK *NBPtr); ///< sets final values in BUCFG and BUCFG2.
+  BOOLEAN (*InitMCT) (struct _MEM_NB_BLOCK *NBPtr); ///< main entry call for memory initialization.
+  VOID (*SendMrsCmd) (struct _MEM_NB_BLOCK *NBPtr); ///< send MRS command.
+  VOID (*sendZQCmd) (struct _MEM_NB_BLOCK *NBPtr); ///< send ZQ command.
+  VOID (*TrainingFlow) (struct _MEM_NB_BLOCK *NBPtr); ///< Set the training flow control
+  VOID (*WritePattern) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Address, UINT8 Pattern[], UINT16 ClCount); ///< Write training pattern.
+  VOID (*ReadPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT32 Address, UINT16 ClCount); ///< Read training pattern.
+  VOID (*GenHwRcvEnReads) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Address);  ///< generates a continuous burst of reads during HW RcvEn training.
+  UINT16 (*CompareTestPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< Compare training pattern.
+  UINT16 (*InsDlyCompareTestPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< Compare training pattern using 1 beat offset to check for insertion delay
+  BOOLEAN (*StitchMemory) (struct _MEM_NB_BLOCK *NBPtr); ///< combines all the memory into a contiguous map.
+  VOID (*ProgramCycTimings) (struct _MEM_NB_BLOCK *NBPtr); ///< programs the memory controller with SPD timings.
+  BOOLEAN (*AutoConfig) (struct _MEM_NB_BLOCK *NBPtr); ///< programs the memory controller with configuration parameters
+  BOOLEAN (*PlatformSpec) (struct _MEM_NB_BLOCK *NBPtr); ///< programs platform specific parameters.
+  VOID (*DisableDCT) (struct _MEM_NB_BLOCK *NBPtr); ///< disable a DCT if no dimm presents.
+  VOID (*StartupDCT) (struct _MEM_NB_BLOCK *NBPtr); ///< start a DCT.
+  VOID (*SyncTargetSpeed) (struct _MEM_NB_BLOCK *NBPtr); ///< Check and sync the target speed of all channels of this node.
+  VOID (*ChangeFrequency) (struct _MEM_NB_BLOCK *NBPtr); ///< Frequency change sequence.
+  BOOLEAN (*RampUpFrequency) (struct _MEM_NB_BLOCK *NBPtr); ///< Change frequency to the next supported level.
+  BOOLEAN (*ChangeNbFrequency) (struct _MEM_NB_BLOCK *NBPtr); ///< Change NB frequency.
+  VOID (*PhyFenceTraining) (struct _MEM_NB_BLOCK *NBPtr); ///< Phy fence training.
+  BOOLEAN (*SyncDctsReady) (struct _MEM_NB_BLOCK *NBPtr); ///< Synchronize DCTs.
+  BOOLEAN (*HtMemMapInit) (struct _MEM_NB_BLOCK *NBPtr); ///< Memory map initialization.
+  VOID (*SyncAddrMapToAllNodes) (struct _MEM_NB_BLOCK *NBPtr); ///< copies the Node 0 map to all the other nodes.
+  BOOLEAN (*CpuMemTyping) (struct _MEM_NB_BLOCK *NBPtr); ///< MTRR and TOM setting.
+  VOID (*BeforeDqsTraining) (struct _MEM_NB_BLOCK *NBPtr); ///< processes needed before DQS training.
+  VOID (*AfterDqsTraining) (struct _MEM_NB_BLOCK *NBPtr); ///< processes needed after DQS training.
+  BOOLEAN (*OtherTiming) (struct _MEM_NB_BLOCK *NBPtr); ///< setting non-spd timing.
+  VOID (*UMAMemTyping) (struct _MEM_NB_BLOCK *NBPtr); ///< MTRR and TOM setting needed for UMA platform.
+  VOID (*Feature) (struct _MEM_NB_BLOCK *NBPtr); ///< Feature support.
+  UINT8 (*GetSocketRelativeChannel) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Dct, UINT8 Channel); ///< Get channel number relative to a socket.
+  VOID (*SetDramOdtRec) (struct _MEM_NB_BLOCK *NBPtr, ODT_MODE OdtMode, UINT8 ChipSelect, UINT8 TargetCS); ///< Set Dram ODT.
+  UINT32 (*GetSysAddrRec) ( VOID ); ///< Get system address for training.
+  VOID (*SwitchNodeRec) (struct _MEM_NB_BLOCK *NBPtr, UINT8 NodeID); ///< Switch to current node.
+  VOID (*TechBlockSwitch) (struct _MEM_NB_BLOCK *NBPtr); ///< Selects appropriate Tech functions for the NB.
+  VOID (*SetEccSymbolSize) (struct _MEM_NB_BLOCK *NBPtr); ///< Set Ecc Symbol Size.
+  VOID (*GetTrainDlyParms) (struct _MEM_NB_BLOCK *NBPtr, TRN_DLY_TYPE TrnDly, TRN_DLY_PARMS *Parms); ///< Retrieve Specific Delay range info for current NB under current conditions.
+  AGESA_STATUS (*TrainingPatternInit) (struct _MEM_NB_BLOCK *NBPtr); ///< Initialize the training Pattern
+  AGESA_STATUS (*TrainingPatternFinalize) (struct _MEM_NB_BLOCK *NBPtr); ///< Finalize the training Pattern
+  BOOLEAN (*GetApproximateWriteDatDelay) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Index, UINT8 *Value); ///< Retrieve the next WrDat Delay Approximation
+  UINT8 (*CSPerChannel) (struct _MEM_NB_BLOCK *NBPtr); ///< Return number of CS per channel.
+  UINT8 (*CSPerDelay) (struct _MEM_NB_BLOCK *NBPtr); ///< Return number of CS controlled per set of delay registers.
+  VOID (*FlushPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Address, UINT16 ClCount);  ///<Flush the training pattern
+  UINT8 (*MinDataEyeWidth) (struct _MEM_NB_BLOCK *NBPtr);  ///<Get Min Data Eye Width in 32nds of a UI
+  VOID (*MemNCapSpeedBatteryLife) (struct _MEM_NB_BLOCK *NBPtr); ///< Caps speed based on battery life check.
+  UINT32 (*GetUmaSize) (struct _MEM_NB_BLOCK *NBPtr); ///< Get Uma Size
+  UINT8 (*GetMemClkFreqId) (struct _MEM_NB_BLOCK *NBPtr, UINT16 Speed); ///< Translate MemClk frequency in MHz to MemClkFreq value
+  VOID (*EnableSwapIntlvRgn) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Base, UINT32 Limit); ///< Enable swapped interleaving region
+  BOOLEAN (*ChangeNbFrequencyWrap) (struct _MEM_NB_BLOCK *NBPr, UINT32 NBPstate); ///< Wrapper for NB Pstate change function
+  VOID (*WaitXMemClks) (struct _MEM_NB_BLOCK *NBPr, UINT32 MemClkCount); ///< Waits a specified number of MemClks
+  VOID (*ProgramNbPsDependentRegs) (struct _MEM_NB_BLOCK *NBPtr); ///< Programs NB Pstate dependent registers
+  VOID (*AllocateC6Storage) (struct _MEM_NB_BLOCK *NBPtr); ///< Allocates DRAM region for Core C6
+
+  /* PUBLIC Get/Set register field functions */
+  UINT32 (*GetBitField) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName); ///< Pci register bit field read.
+  VOID (*SetBitField) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Value); ///< Pci register bit field write.
+  BOOLEAN (*BrdcstCheck) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Value); ///< Pci register bit field broadcast read.
+  VOID (*BrdcstSet) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Value); ///< Pci register bit field broadcast write.
+  VOID (*PollBitField) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Field, UINT32 MicroSecond, BOOLEAN IfBroadCast); ///< Poll a Pci register bitfield.
+  UINT32 (*GetTrainDly) (struct _MEM_NB_BLOCK *NBPtr, TRN_DLY_TYPE TrnDly, DRBN DrbnVar); ///< Training register bit field read.
+  VOID (*SetTrainDly) (struct _MEM_NB_BLOCK *NBPtr, TRN_DLY_TYPE TrnDly, DRBN DrbnVar, UINT16 Value); ///< Training register bit field write.
+  AGESA_STATUS (*InitRecovery) (struct _MEM_NB_BLOCK *NBPtr); ///< Recover mode memory init
+  VOID (*MemRecNInitializeMctNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Initialize MCT changes
+  VOID (*MemRecNFinalizeMctNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Finalize MCT changes
+  VOID (*MemNInitPhyComp) (struct _MEM_NB_BLOCK *NBPtr); ///< Init Phy compensation
+  VOID (*MemNBeforeDramInitNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Before Dram init
+  BOOLEAN (*MemNIsIdSupportedNb) (struct _MEM_NB_BLOCK *NBPtr, CPU_LOGICAL_ID *LogicalIdPtr); ///< Determines if a given CPU id is supported
+  BOOLEAN (*MemNPlatformSpecificFormFactorInitNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Platform specific functions
+  VOID (*MemNSetOtherTimingNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Set non-spd timings
+  VOID (*MemNBeforePlatformSpecNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Apply settings prior to platform specific settings
+  UINT32 (*MemNCmnGetSetFieldNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, BIT_FIELD_NAME FieldName, UINT32 Field); ///< Sets a register value
+  UINT32 (*MemNcmnGetSetTrainDly) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, TRN_DLY_TYPE TrnDly, DRBN DrbnVar, UINT16 Field); ///< Sets a training delay field
+  VOID (*MemPPhyFenceTrainingNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Phy Fence training
+  VOID (*MemPNodeMemBoundaryNb) (struct _MEM_NB_BLOCK *NBPtr, UINT32 *NodeSysLimit); ///< Phy Fence training
+  UINT32 (*MemRecNCmnGetSetFieldNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, BIT_FIELD_NAME FieldName, UINT32 Field); ///< This functions sets bit fields in recover mode
+  UINT32 (*MemRecNcmnGetSetTrainDlyNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, TRN_DLY_TYPE TrnDly, DRBN DrbnVar, UINT16 Field); ///< This functions sets bit fields in recover mode
+  VOID (*MemRecNSwitchDctNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 NodeID); ///< S3 Exit self refresh register
+  VOID (*MemNPFenceAdjustNb) (struct _MEM_NB_BLOCK *NBPtr, INT16 *Value16); ///< Adjust Avg PRE value of Phy fence training
+  VOID (*MemNPrepareRcvrEnDlySeed) (struct _MEM_NB_BLOCK *NBPtr); ///< Seed valude for HW RxEn training
+  UINT8 (*MemNGetDramTerm) (struct _MEM_NB_BLOCK *NBPtr, UINT8 ChipSel); ///< Dram Term value
+  UINT8 (*MemNGetDynDramTerm) (struct _MEM_NB_BLOCK *NBPtr, UINT8 ChipSel); ///< Dynamic Dram Term value
+  VOID (*MemNSaveMR0) (struct _MEM_NB_BLOCK *NBPtr, UINT32 MrsAddress); ///< Save MR0 during memory initialization
+  UINT32 (*MemNGetMR0CL) (struct _MEM_NB_BLOCK *NBPtr); ///< MR0[CL] value
+  UINT32 (*MemNGetMR0WR) (struct _MEM_NB_BLOCK *NBPtr); ///< MR0[WR] value
+  UINT32 (*MemNGetMR2CWL) (struct _MEM_NB_BLOCK *NBPtr); ///< MR2[CWL] value
+  UINT32 (*InPhaseCompareRdDqs__Pattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< InPhase Compare training pattern for RdDQS training
+  UINT32 (*Phase180CompareRdDqs__Pattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< 180 Compare training pattern for RdDQS training
+  VOID (*AgressorContinuousWrites) (struct _MEM_NB_BLOCK *NBPtr, UINT8 SeedCount, BOOLEAN TurnOnInfinite); ///< Enables/Disables continuous writes on unused agressor channels
+  UINT32 (*GetPrbs__RdDqsSeed) (struct _MEM_NB_BLOCK *NBPtr, UINT8 SeedCount); ///< Prbs Seed for RdDqs training
+  VOID (*DisableInfiniteWritePattern) (struct _MEM_NB_BLOCK *NBPtr); ///< Disables infinite Write training pattern.
+  VOID (*EnableInfiniteWritePattern) (struct _MEM_NB_BLOCK *NBPtr); ///< Enables infinite training pattern.
+  VOID (*InitializeRdDqs__VictimContinuousWrites) (struct _MEM_NB_BLOCK *NBPtr); ///< Initializes victim infinite training pattern for RdDqstraining.
+  VOID (*FinalizeRdDqs__VictimContinuousWrites) (struct _MEM_NB_BLOCK *NBPtr); ///< Finalizes victim infinite training pattern for RdDqstraining.
+  VOID (*InitializeRdDqs__VictimChipSelContinuousWrites) (struct _MEM_NB_BLOCK *NBPtr); ///< Initializes victim infinite training pattern for RdDqstraining for victim CS.
+  VOID (*StartRdDqs__VictimContinuousWrites) (struct _MEM_NB_BLOCK *NBPtr , UINT8 SeedCount); ///< Starts victim infinite training pattern for RdDqstraining.
+} MEM_NB_BLOCK;
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+MemNInitNBDataNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNSwitchDCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  );
+
+VOID
+MemNSwitchChannelNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  );
+
+UINT32
+MemNGetBitFieldNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName
+  );
+
+VOID
+MemNSetBitFieldNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+BOOLEAN
+MemNBrdcstCheckNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+VOID
+MemNBrdcstSetNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+
+UINT32
+MemNGetTrainDlyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar
+  );
+
+VOID
+MemNSetTrainDlyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+BOOLEAN
+MemNRankEnabledNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Receiver
+  );
+
+UINT8 MemNGetSocketRelativeChannelNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct,
+  IN       UINT8 Channel
+  );
+
+VOID
+MemNPhyFenceTrainingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNGetMCTSysAddrNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Receiver,
+  OUT      UINT32 *AddrPtr
+  );
+
+BOOLEAN
+MemNPlatformSpecNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNStitchMemoryNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNDisableDCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNDisableDCTClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNDisableDCTUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNStartupDCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNStartupDCTUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNChangeFrequencyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNRampUpFrequencyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNProgramCycTimingsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNGetMaxLatParamsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly,
+  IN OUT   UINT16 *MinDlyPtr,
+  IN OUT   UINT16 *MaxDlyPtr,
+  IN OUT   UINT16 *DlyBiasPtr
+  );
+
+UINT16
+MemNTotalSyncComponentsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNSetMaxLatencyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly
+  );
+
+VOID
+MemNSendZQCmdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNSwapBitsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNSwapBitsUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNTrainPhyFenceNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitPhyCompNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNGetTrainDlyParmsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN OUT   TRN_DLY_PARMS *Parms
+  );
+
+
+VOID
+MemNGetTrainDlyParmsClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN OUT   TRN_DLY_PARMS *Parms
+  );
+
+VOID
+MemNBeforeDQSTrainingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemNcmnGetSetTrainDlyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+UINT32
+MemNcmnGetSetTrainDlyClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+UINT32
+MemNcmnGetSetTrainDlyUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+VOID
+MemNSyncTargetSpeedNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNSyncDctsReadyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNHtMemMapInitNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT8
+MemNGetTrdrdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT8
+MemNGetTwrwrNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT8
+MemNGetTwrrdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT8
+MemNGetTrwtTONb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT8
+MemNGetTrwtWBNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNPowerDownCtlNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNCPUMemTypingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNUMAMemTypingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNSyncAddrMapToAllNodesNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNInitMCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNTechBlockSwitchNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemRecNGetBitFieldNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName
+  );
+
+VOID
+MemRecNSetBitFieldNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+UINT32
+MemRecNGetTrainDlyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar
+  );
+
+VOID
+MemRecNSetTrainDlyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+BOOLEAN
+MemRecNAutoConfigNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemRecNPlatformSpecNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemRecNStartupDCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemRecNSetMaxLatencyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly
+  );
+
+VOID
+MemRecNSetDramOdtNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       ODT_MODE OdtMode,
+  IN       UINT8 ChipSelect,
+  IN       UINT8 TargetCS
+  );
+
+VOID
+MemRecNSendMrsCmdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+
+VOID
+MemRecNSendZQCmdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemRecNContReadPatternClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+AGESA_STATUS
+MemRecNMemInitNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemRecNCPUMemRecTypingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemRecNGetMCTSysAddrNb ( VOID );
+
+UINT32
+MemRecGetVarMtrrHiMsk (
+  IN       CPU_LOGICAL_ID *LogicalIdPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+INT8
+MemNGetOptimalCGDDNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly1,
+  IN       TRN_DLY_TYPE TrnDly2
+  );
+
+VOID
+MemNPollBitFieldNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field,
+  IN       UINT32 MicroSecond,
+  IN       BOOLEAN IfBroadCast
+  );
+
+VOID
+MemNSetEccSymbolSizeNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNDQSTiming3Nb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNDQSTiming2Nb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNTrainingFlowNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNRecTrainingFlowNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNRecTrainingFlowClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNRecTrainingFlowUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemRecNTotalSyncComponentsClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemRecNStartupDCTClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+
+VOID
+MemRecNPhyVoltageLevelNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+AGESA_STATUS
+MemNTrainingPatternInitNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNGetApproximateWriteDatDelayNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Index,
+  IN OUT   UINT8 *Value
+  );
+
+AGESA_STATUS
+MemNTrainingPatternFinalizeNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNFlushPatternNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+UINT8
+MemNCSPerChannelNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT8
+MemNCSPerDelayNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT8
+MemNMinDataEyeWidthNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT16
+MemNCompareTestPatternNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  );
+
+UINT16
+MemNInsDlyCompareTestPatternNb (
+  IN       MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  );
+
+
+UINT32
+MemNGetUmaSizeNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNSetMTRRUmaRegionUCNb  (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 *BasePtr,
+  IN OUT   UINT32 *LimitPtr
+  );
+
+UINT8
+MemNGetMemClkFreqIdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 Speed
+  );
+
+UINT8
+MemNGetMemClkFreqIdClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 Speed
+  );
+
+UINT8
+MemNGetMemClkFreqIdUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 Speed
+  );
+
+UINT16
+MemNGetMemClkFreqUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 FreqId
+  );
+
+BOOLEAN
+MemNGetPlatformCfgNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNPlatformSpecUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNProgramPlatformSpecNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNProgramCycTimingsClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+INT16
+MemNCalcCDDNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDlyType1,
+  IN       TRN_DLY_TYPE TrnDlyType2,
+  IN       BOOLEAN SameDimm,
+  IN       BOOLEAN DiffDimm
+  );
+
+VOID
+MemNChangeFrequencyClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNChangeFrequencyUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNProgramNbPstateDependentRegistersUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNProgramNbPstateDependentRegistersClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNAllocateC6StorageClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNAllocateC6StorageUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNPhyVoltageLevelNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNPhyFenceTrainingUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNPFenceAdjustUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   INT16 *Value16
+  );
+
+VOID
+MemNInitPhyCompClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemNTotalSyncComponentsClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNEnableSwapIntlvRgnNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN          UINT32 Base,
+  IN          UINT32 Limit
+  );
+
+VOID
+MemNPhyPowerSavingClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNPhyPowerSavingUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNSetASRSRTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNPrepareRcvrEnDlySeedNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNChangeNbFrequencyUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNChangeNbFrequencyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNWaitXMemClksNb (
+  IN OUT   MEM_NB_BLOCK  *NBPtr,
+  IN       UINT32 MemClkCount
+  );
+
+BOOLEAN
+memNSequenceDDR3Nb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT16
+GetTrainDlyFromHeapNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDlyType,
+  IN       DRBN Drbn
+  );
+
+BOOLEAN
+MemNTrainingFlowUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNSetupHwTrainingEngineUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       VOID* OptParam
+  );
+
+BOOLEAN
+MemNBeforePhyFenceTrainingClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemNReEnablePhyCompNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+UINT8
+MemNGetDramTermNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSel
+  );
+
+UINT8
+MemNGetDynDramTermNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSel
+  );
+
+UINT32
+MemNGetMR0CLNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemNGetMR0WRNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemNGetMR2CWLNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNDctCfgSelectUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       VOID *Dct
+  );
+
+BOOLEAN
+MemNGetMaxDdrRateUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       VOID *DdrMaxRate
+  );
+
+BOOLEAN
+MemRecNReEnablePhyCompNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+UINT32
+MemRecNcmnGetSetTrainDlyClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+VOID
+MemNSetTxpNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNAdjustTxpdllClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemNCalcWrDqDqsEarlyUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+VOID
+MemNGetTrainDlyParmsUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN OUT   TRN_DLY_PARMS *Parms
+  );
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNChangeNbFrequencyWrapUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 NBPstate
+  );
+
+BOOLEAN
+MemNForcePhyToM0Unb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+VOID
+MemNProgramCycTimingsUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNSetSkewMemClkUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+VOID
+MemNSendMrsCmdUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT8
+MemNGetDramTermTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSel
+  );
+
+UINT8
+MemNGetDynDramTermTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSel
+  );
+
+UINT32
+MemNGetMR2CWLUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemNGetMR0CLTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+UINT32
+MemNGetMR0WRTblDrvNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNRampUpFrequencyUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNAfterSaveRestoreUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemNAdjustRdDqsDlyOffsetUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *Offset
+  );
+
+BOOLEAN
+MemNCalcWrDqDqsEarlyClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemNSlot1MaxRdLatTrainClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *TestAddrRJ16
+  );
+
+VOID
+MemNC6AdjustMSRs (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNInitializeRxEnSeedlessTrainingUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemNTrackRxEnSeedlessRdWrNoWindBLErrorUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemNTrackRxEnSeedlessRdWrSmallWindBLErrorUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemNInitialzeRxEnSeedlessByteLaneErrorUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+VOID
+MemNPhyPowerSavingMPstateUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNChangeMemPStateContextNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSTATE MemPstate
+  );
+
+VOID
+MemNDramPowerMngTimingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemNBfAfExcludeDimmClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *IsBefore
+  );
+
+
+BOOLEAN
+MemNAllocateNBRegTableNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       NB_REG_TAB_HANDLE  Handle
+  );
+
+VOID
+MemTResetRcvFifoUnb (
+  IN OUT   struct _MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dummy
+  );
+
+VOID
+MemRecNContReadPatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemRecNContWritePatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+UINT16
+MemRecNCompareTestPatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  );
+
+BOOLEAN
+MemNResetRxFifoPtrClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+
+UINT32
+MemNInPhaseCompareRdDqs__PatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  );
+
+UINT32
+MemN180CompareRdDqs__PatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  );
+
+VOID
+MemNAgressorContinuousWritesUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 SeedCount,
+  IN       BOOLEAN TurnOnInfinite
+  );
+
+UINT32
+MemNGetPrbs__RdDqsSeedUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 SeedCount
+  );
+
+BOOLEAN
+MemNAdjust2DPhaseMaskBasedOnEccUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  );
+
+VOID
+MemNRrwPrechargeCmd (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSelect,
+  IN       UINT8 Bank
+  );
+
+VOID
+MemNRrwActivateCmd (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ChipSelect,
+  IN       UINT8 Bank,
+  IN       UINT32 RowAddress
+  );
+
+VOID
+MemNStartRdDqs__VictimContinuousWritesUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 SeedCount
+  );
+
+VOID
+MemNInitializeRdDqs__VictimChipSelContinuousWritesUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNFinalizeRdDqs__VictimContinuousWritesUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemNInitializeRdDqs__VictimContinuousWritesUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MN_H_ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/mp.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/mp.h
new file mode 100644
index 0000000000..717beb7ba2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/mp.h
@@ -0,0 +1,607 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mp.h
+ *
+ * Platform Specific common header file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 55046 $ @e \$Date: 2011-06-15 23:59:07 -0600 (Wed, 15 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#ifndef _MP_H_
+#define _MP_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/// Type of an entry for Dram Term table
+typedef struct {
+  UINT32 Speed; ///< BitMap for the supported speed
+  UINT8  Dimms; ///< BitMap for supported number of dimm
+  UINT8  QR_Dimms; ///< BitMap for supported number of QR dimm
+  UINT8  DramTerm; ///< DramTerm value
+  UINT8  QR_DramTerm; ///< DramTerm value for QR
+  UINT8  DynamicDramTerm; ///< Dynamic DramTerm
+} DRAM_TERM_ENTRY;
+
+/// Type of an entry for POR speed limit table
+typedef struct {
+  UINT16   DIMMRankType;  ///< Bitmap of Ranks
+  UINT8    Dimms;  ///< Number of dimm
+  UINT16    SpeedLimit_1_5V; ///< POR speed limit for 1.5V
+  UINT16    SpeedLimit_1_35V; ///< POR speed limit for 1.35V
+  UINT16    SpeedLimit_1_25V; ///< POR speed limit for 1.25V
+} POR_SPEED_LIMIT;
+
+/// UDIMM&RDIMM Max. Frequency
+typedef union {
+  struct {                       ///< PSCFG_MAXFREQ_ENTRY
+    UINT16 DimmPerCh:3;          ///< Dimm slot per chanel
+    UINT16 Dimms:3;              ///< Number of Dimms on a channel
+    UINT16 SR:3;                 ///< Number of single-rank Dimm
+    UINT16 DR:3;                 ///< Number of dual-rank Dimm
+    UINT16 QR:4;                 ///< Number of quad-rank Dimm
+    UINT16 Speed1_5V;            ///< Speed limit with voltage 1.5V
+    UINT16 Speed1_35V;           ///< Speed limit with voltage 1.35V
+    UINT16 Speed1_25V;           ///< Speed limit with voltage 1.25V
+  } _MAXFREQ_ENTRY;
+  struct {
+    UINT16 CDN;                  ///< Condition
+    UINT16 Speed[3];             ///< Speed limit
+  } MAXFREQ_ENTRY;
+} PSCFG_MAXFREQ_ENTRY;
+
+///  LRDIMM Max. Frequency
+typedef union {
+  struct {                       ///< PSCFG_LR_MAXFREQ_ENTRY
+    UINT16 DimmPerCh:3;          ///< Dimm slot per chanel
+    UINT16 Dimms:3;              ///< Number of Dimms on a channel
+    UINT16 LR:10;                ///< Number of LR-DIMM
+    UINT16 Speed1_5V;            ///< Speed limit with voltage 1.5V
+    UINT16 Speed1_35V;           ///< Speed limit with voltage 1.35V
+    UINT16 Speed1_25V;           ///< Speed limit with voltage 1.25V
+  } _LR_MAXFREQ_ENTRY;
+  struct {
+    UINT16 CDN;
+    UINT16 Speed[3];
+  } LR_MAXFREQ_ENTRY;
+} PSCFG_LR_MAXFREQ_ENTRY;
+
+/// UDIMM&RDIMM RttNom and RttWr
+typedef struct {
+  UINT64 DimmPerCh:8;          ///< Dimm slot per chanel
+  UINT64 DDRrate:32;           ///< Bitmap of DDR rate
+  UINT64 VDDIO:4;              ///< Bitmap of VDDIO
+  UINT64 Dimm0:4;              ///< Bitmap of rank type of Dimm0
+  UINT64 Dimm1:4;              ///< Bitmap of rank type of Dimm1
+  UINT64 Dimm2:4;              ///< Bitmap of rank type of Dimm2
+  UINT64 Dimm:4;               ///< Bitmap of rank type of Dimm
+  UINT64 Rank:4;               ///< Bitmap of rank
+  UINT8 RttNom:3;              ///< Dram term
+  UINT8 RttWr:5;               ///< Dynamic dram term
+} PSCFG_RTT_ENTRY;
+
+/// LRDIMM RttNom and RttWr
+typedef struct {
+  UINT64 DimmPerCh:8;          ///< Dimm slot per chanel
+  UINT64 DDRrate:32;           ///< Bitmap of DDR rate
+  UINT64 VDDIO:4;              ///< Bitmap of VDDIO
+  UINT64 Dimm0:4;              ///< Dimm0 population
+  UINT64 Dimm1:4;              ///< Dimm1 population
+  UINT64 Dimm2:12;             ///< Dimm2 population
+  UINT8 RttNom:3;              ///< Dram term
+  UINT8 RttWr:5;               ///< Dynamic dram term
+} PSCFG_LR_RTT_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM ODT pattern OF 1 DPC
+typedef struct {
+  UINT16 Dimm0;                ///< Bitmap of dimm0 rank type or dimm0 population of LRDIMM
+  UINT32 RdODTCSHigh;          ///< RdODTCSHigh
+  UINT32 RdODTCSLow;           ///< RdODTCSLow
+  UINT32 WrODTCSHigh;          ///< WrODTCSHigh
+  UINT32 WrODTCSLow;           ///< WrODTCSLow
+} PSCFG_1D_ODTPAT_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM ODT pattern OF 2 DPC
+typedef struct {
+  UINT16 Dimm0:4;              ///< Bitmap of dimm0 rank type or dimm0 population of LRDIMM
+  UINT16 Dimm1:12;             ///< Bitmap of dimm1 rank type or dimm1 population of LRDIMM
+  UINT32 RdODTCSHigh;          ///< RdODTCSHigh
+  UINT32 RdODTCSLow;           ///< RdODTCSLow
+  UINT32 WrODTCSHigh;          ///< WrODTCSHigh
+  UINT32 WrODTCSLow;           ///< WrODTCSLow
+} PSCFG____ODTPAT_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM ODT pattern OF 3 DPC
+typedef struct {
+  UINT16 Dimm0:4;              ///< Bitmap of dimm0 rank type or dimm0 population of LRDIMM
+  UINT16 Dimm1:4;              ///< Bitmap of dimm1 rank type or dimm1 population of LRDIMM
+  UINT16 Dimm2:8;              ///< Bitmap of dimm2 rank type or dimm2 population of LRDIMM
+  UINT32 RdODTCSHigh;          ///< RdODTCSHigh
+  UINT32 RdODTCSLow;           ///< RdODTCSLow
+  UINT32 WrODTCSHigh;          ///< WrODTCSHigh
+  UINT32 WrODTCSLow;           ///< WrODTCSLow
+} PSCFG_3D_ODTPAT_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM SlowMode, AddrTmgCtl and ODC
+typedef struct {
+  UINT64 DimmPerCh:8;          ///< Dimm slot per channel
+  UINT64 DDRrate:32;           ///< Bitmap of DDR rate
+  UINT64 VDDIO:4;              ///< Bitmap of VDDIO
+  UINT64 Dimm0:4;              ///< Bitmap of dimm0 rank type or dimm0 population of LRDIMM
+  UINT64 Dimm1:4;              ///< Bitmap of dimm1 rank type or dimm1 population of LRDIMM
+  UINT64 Dimm2:11;             ///< Bitmap of dimm2 rank type or dimm2 population of LRDIMM
+  UINT64 SlowMode:1;           ///< SlowMode
+  UINT32 AddTmgCtl;            ///< AddTmgCtl
+  UINT32 ODC;                  ///< ODC
+} PSCFG_SAO_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM training config entry
+typedef struct {
+  UINT64 DimmPerCh:8;          ///< Dimm slot per channel
+  UINT64 DDRrate:32;           ///< Bitmap of DDR rate
+  UINT64 VDDIO:4;              ///< Bitmap of VDDIO
+  UINT64 Dimm0:4;              ///< Bitmap of dimm0 rank type or dimm0 population of LRDIMM
+  UINT64 Dimm1:4;              ///< Bitmap of dimm1 rank type or dimm1 population of LRDIMM
+  UINT64 Dimm2:11;             ///< Bitmap of dimm2 rank type or dimm2 population of LRDIMM
+  UINT64 Enable__:1;           ///< SlowMode
+} PSCFG_S___ENTRY;
+
+/// UDIMM&RDIMM MR0[WR]
+typedef struct {
+  UINT8 Timing;                ///< Fn2_22C_dct[1:0][Twr]
+  UINT8 Value;                 ///< MR0[WR] : bit0 - bit2 available
+} PSCFG_MR0WR_ENTRY;
+
+/// UDIMM&RDIMM MR0[CL]
+typedef struct {
+  UINT8 Timing;                ///< Fn2_200_dct[1:0][Tcl]
+  UINT8 Value:3;               ///< MR0[CL] : bit0 - bit2 CL[3:1]
+  UINT8 Value1:5;              ///< MR0[CL] : bit3 CL[0]
+} PSCFG_MR0CL_ENTRY;
+
+/// UDIMM&RDIMM MR2[IBT]
+typedef struct {
+  UINT64 DimmPerCh:4;          ///< Dimm slot per channel
+  UINT64 DDRrate:32;           ///< Bitmap of DDR rate
+  UINT64 VDDIO:4;              ///< Bitmap of VDDIO
+  UINT64 Dimm0:4;              ///< Bitmap of dimm0 rank type
+  UINT64 Dimm1:4;              ///< Bitmap of dimm1 rank type
+  UINT64 Dimm2:4;              ///< Bitmap of dimm2 rank type
+  UINT64 Dimm:4;               ///< Bitmap of rank type of Dimm
+  UINT64 NumOfReg:4;           ///< Number of registers
+  UINT64 IBT:4;                 ///< MR2[IBT] value
+} PSCFG_MR2IBT_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM Operating Speed
+typedef struct {
+  UINT32 DDRrate;              ///< Bitmap of DDR rate
+  UINT8 OPSPD;                 ///< RC10[OperatingSpeed]
+} PSCFG_OPSPD_ENTRY;
+
+/// LRDIMM IBT
+typedef struct {
+  UINT64 DimmPerCh:4;          ///< Dimm slot per channel
+  UINT64 DDRrate:32;           ///< Bitmap of DDR rate
+  UINT64 VDDIO:4;              ///< Bitmap of VDDIO
+  UINT64 Dimm0:4;              ///< Dimm0 population
+  UINT64 Dimm1:4;              ///< Dimm1 population
+  UINT64 Dimm2:4;              ///< Dimm2 population
+  UINT64 F0RC8:3;              ///< F0RC8
+  UINT64 F1RC0:3;              ///< F1RC0
+  UINT64 F1RC1:3;              ///< F1RC1
+  UINT64 F1RC2:3;              ///< F1RC2
+} PSCFG_L_IBT_ENTRY;
+
+/// LRDIMM F0RC13[NumPhysicalRanks]
+typedef struct {
+  UINT8 NumRanks:3;            ///< NumRanks
+  UINT8 NumPhyRanks:5;         ///< NumPhyRanks
+} PSCFG_L_NPR_ENTRY;
+
+/// LRDIMM F0RC13[NumLogicalRanks]
+typedef struct {
+  UINT16 NumPhyRanks:3;        ///< NumPhyRanks
+  UINT16 DramCap:4;            ///< DramCap
+  UINT16 NumDimmSlot:9;        ///< NumDimmSlot
+  UINT8 NumLogRanks;           ///< NumLogRanks
+} PSCFG_L_NLR_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM pass1 seed entry
+typedef struct {
+  UINT8 DimmPerCh;             ///< Dimm slot per channel
+  UINT8 Channel;               ///< Channel#
+  UINT16 SeedVal;              ///< Seed value
+} PSCFG_SEED_ENTRY;
+
+/// Platform specific configuration types
+typedef enum {
+  PSCFG_MAXFREQ,               ///< PSCFG_MAXFREQ
+  PSCFG_LR_MAXFREQ,            ///< PSCFG_LR_MAXFREQ
+  PSCFG_RTT,                   ///< PSCFG_RTT
+  PSCFG_LR_RTT,                ///< PSCFG_LR_RTT
+  PSCFG_ODT_PAT_1D,            ///< PSCFG_ODT_PAT_1D
+  PSCFG_ODT_PAT___,            ///< PSCFG_ODT_PAT___
+  PSCFG_ODT_PAT_3D,            ///< PSCFG_ODT_PAT_3D
+  PSCFG_LR_ODT_PAT_1D,         ///< PSCFG_LR_ODT_PAT_1D
+  PSCFG_LR_ODT_PAT___,         ///< PSCFG_LR_ODT_PAT___
+  PSCFG_LR_ODT_PAT_3D,         ///< PSCFG_LR_ODT_PAT_3D
+  PSCFG_SAO,                   ///< PSCFG_SAO
+  PSCFG_LR_SAO,                ///< PSCFG_LR_SAO
+  PSCFG_MR0WR,                 ///< PSCFG_MR0WR
+  PSCFG_MR0CL,                 ///< PSCFG_MR0CL
+  PSCFG_RC2IBT,                ///< PSCFG_RC2IBT
+  PSCFG_RC10OPSPD,             ///< PSCFG_RC10OPSPD
+  PSCFG_LR_IBT,                ///< PSCFG_LR_IBT
+  PSCFG_LR_NPR,                ///< PSCFG_LR_NPR
+  PSCFG_LR_NLR,                ///< PSCFG_LR_NLR
+  PSCFG_S__,                   ///< PSCFG_S__
+  PSCFG_WL_PASS1_SEED,         ///< PSCFG_WL_PASS1_SEED
+  PSCFG_HWRXEN_PASS1_SEED,     ///< PSCFG_HWRXEN_SEED
+
+  // The type of general table entries could be added between
+  // PSCFG_GEN_START and PSCFG_GEN_END so that the PSCGen routine
+  // is able to look for the entries per the PSCType.
+  PSCFG_GEN_START,             ///< PSCFG_GEN_START
+  PSCFG_CLKDIS,                ///< PSCFG_CLKDIS
+  PSCFG_CKETRI,                ///< PSCFG_CKETRI
+  PSCFG_ODTTRI,                ///< PSCFG_ODTTRI
+  PSCFG_CSTRI,                 ///< PSCFG_CSTRI
+  PSCFG_GEN_END                ///< PSCFG_GEN_END
+} PSCFG_TYPE;
+
+/// Dimm types
+typedef enum {
+  UDIMM_TYPE = 0x01,           ///< UDIMM_TYPE
+  RDIMM_TYPE = 0x02,           ///< RDIMM_TYPE
+  SODIMM_TYPE = 0x04,          ///< SODIMM_TYPE
+  LRDIMM_TYPE = 0x08,          ///< LRDIMM_TYPE
+  SODWN_SODIMM_TYPE = 0x10,    ///< SODWN_SODIMM_TYPE
+  DT_DONT_CARE = 0xFF          ///< DT_DONT_CARE
+} DIMM_TYPE;
+
+/// Number of Dimm
+typedef enum {
+  _1DIMM = 0x01,               ///< _1DIMM
+  _2DIMM = 0x02,               ///< _2DIMM
+  _3DIMM = 0x04,               ///< _3DIMM
+  _4DIMM = 0x08,               ///< _4DIMM
+  NOD_DONT_CARE = 0xFF         ///< NOD_DONT_CARE
+} NOD_SUPPORTED;
+
+/// Table header related definitions
+typedef struct {
+  PSCFG_TYPE PSCType;           ///< PSC Type
+  DIMM_TYPE DimmType;           ///< Dimm Type
+  NOD_SUPPORTED NumOfDimm;      ///< Numbef of dimm
+  CPU_LOGICAL_ID LogicalCpuid;  ///< Logical Cpuid
+  UINT8 PackageType;            ///< Package Type
+  TECHNOLOGY_TYPE TechType;     ///< Technology type
+} PSC_TBL_HEADER;
+
+/// Table entry
+typedef struct {
+  PSC_TBL_HEADER Header;        ///< PSC_TBL_HEADER
+  UINT8 TableSize;              ///< Table size
+  VOID *TBLPtr;                 ///< Pointer of the table
+} PSC_TBL_ENTRY;
+
+#define NOD_DONT_CARE 0xFF
+#define PT_DONT_CARE 0xFF
+#define NP 1
+#define V1_5  1
+#define V1_35  2
+#define V1_25  4
+#define VOLT_ALL (V1_5 | V1_35 | V1_25)
+#define DIMM_SR 2
+#define DIMM_DR 4
+#define DIMM_QR 8
+#define DIMM_LR 2
+#define R0 1
+#define R1 2
+#define R2 4
+#define R3 8
+#define CH_A 0x01
+#define CH_B 0x02
+#define CH_C 0x04
+#define CH_D 0x08
+#define CH_ALL 0x0F
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+MemPConstructPsUDef (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+BOOLEAN
+MemPGetDramTerm (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 ArraySize,
+  IN       CONST DRAM_TERM_ENTRY *DramTermPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsSHy3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsUHy3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsRHy3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsUC32_3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsRC32_3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+
+AGESA_STATUS
+MemPConstructPsSDr3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsUDr3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsRDr3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsUDA3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsSNi3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsUNi3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsSRb3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsURb3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsSPh3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsUPh3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsSDA3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsSDA2 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsSLN3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsULN3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsRLN3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsSON3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+AGESA_STATUS
+MemPConstructPsUON3 (
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN OUT   CH_DEF_STRUCT *ChannelPtr,
+  IN OUT   MEM_PS_BLOCK *PsPtr
+  );
+
+UINT16
+MemPGetPorFreqLimit (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 FreqLimitSize,
+  IN       CONST POR_SPEED_LIMIT *FreqLimitPtr
+  );
+
+VOID
+MemPGetPORFreqLimitDef (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemPPSCFlow (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemPConstructRankTypeMap (
+  IN          UINT16 Dimm0,
+  IN          UINT16 Dimm1,
+  IN          UINT16 Dimm2,
+  IN OUT   UINT16 *RankTypeInTable
+ );
+
+BOOLEAN
+MemPIsIdSupported (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID LogicalId,
+  IN       UINT8 PackageType
+ );
+
+UINT16
+MemPGetPsRankType (
+  IN       CH_DEF_STRUCT *CurrentChannel
+  );
+
+BOOLEAN
+MemPRecPSCFlow (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemPRecConstructRankTypeMap (
+  IN          UINT16 Dimm0,
+  IN          UINT16 Dimm1,
+  IN          UINT16 Dimm2,
+  IN OUT   UINT16 *RankTypeInTable
+ );
+
+BOOLEAN
+MemPRecIsIdSupported (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID LogicalId,
+  IN       UINT8 PackageType
+ );
+
+UINT16
+MemPRecGetPsRankType (
+  IN       CH_DEF_STRUCT *CurrentChannel
+  );
+
+UINT16
+MemPProceedTblDrvOverride (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       UINT8 ProceededPSOType
+  );
+
+BOOLEAN
+MemPGetPSCPass1Seed (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MP_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/mport.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/mport.h
new file mode 100644
index 0000000000..20e23c5e03
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/mport.h
@@ -0,0 +1,71 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mport.h
+ *
+ * API's to support different OS
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+ /*****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ *===========================================================================
+ *  AMD Revision History
+ *  Initial Version
+ *
+ */
+#ifndef _MPORT_H_
+#define _MPORT_H_
+
+///< 64 bit data structure
+///< lo - Lower 32 bits
+///< hi - Upper 32 bits
+typedef struct {
+  UINT32 lo; ///< Lower 32 bits
+  UINT32 hi; ///< Upper 32 bits
+} S_UINT64;
+/*
+ *   SBDFO - Segment Bus Device Function Offset
+ *   31:28   Segment (4-bits)
+ *   27:20   Bus     (8-bits)
+ *   19:15   Device  (5-bits)
+ *   14:12   Function(3-bits)
+ *   11:00   Offset  (12-bits)
+ */
+typedef UINT32 SBDFO;
+
+#define GET_SIZE_OF(x)   (sizeof (x) / sizeof (x[0]))
+
+#endif /* _MPORT_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/mt.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/mt.h
new file mode 100644
index 0000000000..c78f0f87f9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/mt.h
@@ -0,0 +1,510 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt.h
+ *
+ * Common Technology
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 54372 $ @e \$Date: 2011-06-07 22:22:22 -0600 (Tue, 07 Jun 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MT_H_
+#define _MT_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+#define FIRST_PASS      1
+#define SECOND_PASS     2
+#define BIGPAGE_X8_RJ16 0x80
+#define BIGPAGE_X8      0x800000
+#define DQS_FAIL        1
+#define DQS_PASS        0
+#define DQS_WRITE_DIR    1
+#define DQS_READ_DIR     0
+#define MIN_DQS_WNDW    3
+#define ST_UNSTEADY     0
+#define ST_STEADY       1
+#define ST_GROSS_SWEEP  2
+#define ST_FINE_SWEEP   3
+#define ST_FINISH       4
+#define NIBBLE_0        0
+#define NIBBLE_1        1
+
+#define MAX_BYTELANES_PER_CHANNEL   (8 + 1)  ///< Max Bytelanes per channel
+
+#define MAX_FILTER_DLY_DDR2 0x20
+#define MAX_FILTER_DLY_DDR3 0x28
+
+#define NEW_RECEIVER_START_VALUE  0x4
+#define NEW_RECEIVER_STEP_1       4
+#define NEW_RECEIVER_STEP_2       7
+
+#define NEW_RECEIVER_FINAL_OFFSETVALUE 5
+
+#define MAX_POS_RX_EN_SEED_GROSS_RANGE 0x20     ///< Max Range RxEn Seed Gross
+#define MAX_POS_RX_EN_SEED_GROSS_DIR 0x2       ///< Max RxEn Seed Gross Direction
+
+#define DBG_PRINT_STAGE           18                    // "Stage"
+#define DBG_PRINT_0_TO_64         23                    // "0...64"
+#define DBG_SPACES_4              21                    // 4 spaces
+#define DBG_POS_NEW_LINE          11                    // New Line for POS training
+#define DBG_WR_DLY                24                    // "Write Delay: "
+#define DBG_B_L_R_W_M             22                    // " Bytelane  Left   Right  Width  Middle"
+#define DBG_RX_EN_NEW_LINE        25                    // New Line for Rx En
+#define DBG_RX_EN_STAGE1          6                     // "Receiver Enable Training Stage 1:"
+#define DBG_RX_EN_STAGE2          7                     // "Receiver Enable Training Stage 2:"
+#define DBG_RX_EN_STAGE3          8                     // "Receiver Enable Training Stage 3:"
+#define DBG_DLY_PER_BL            9                     // "Dly per BL   -"
+#define DBG_A_B_DLY               10                    // "ALL BLs have Dly:"
+#define DBG_RCVR_PRT_VALUE        0x0010F               // PORT for RX EN training to print a value
+#define DBG_RX_POS_PRT_VALUE      0x0011F               // PORT for POS training to print a value
+
+#define DONE_FILTER 0           ///<  optimized receiver enable training glitch search complete
+#define START_FILTER 1          ///<  optimized receiver enable training start glitch filter search
+#define FILTER_FIRST_STAGE_COUNT 4 ///<  optimized receiver enable training glitch filter first stage count
+#define FILTER_SECOND_STAGE_COUNT 7  ///<  optimized receiver enable training glitch second stage count
+#define FILTER_OFFSET_VALUE 0x1C ///<  optimized receiver enable training glitch filter offset value int preamble
+#define FILTER_WINDOW_SIZE 0x28  ///< optimized receiver enable training glitch filter search window size
+#define FILTER_MAX_REC_EN_DLY_VALUE 0x1FF ///< optimized receiver enable glitch filter max receiver value
+#define FILTER_NEW_RECEIVER_START_VALUE  0x0    ///< optimized receiver enable glitch filter  Start value
+#define MAX_NUMBER_NIBBLES 18      ///< Maximum number of nibbles
+#define MAX_NUMBER_LANES 18      ///< Maximum number of lanes (nibbles or bytes)
+#define MAX____VREF_ENTRIES  0x20        ///< Maximum number of vref entries
+#define MAX_RD_DQS_ENTRIES  0x40         ///< Maximum number of RDDQS Entries
+#define VREF_ADDITIONAL_STEP_SIZE  0x0         ///< Vref Additional Step size
+#define RDDQS_ADDITIONAL_STEP_SIZE  0x0         ///< RdDqs Additional Step size
+#define MAX____DQS_SEED_COUNT 2                      ///< Max Seed count
+#define MAX____RDDQS_CS_PER_CHANNEL      8   ///< Max CS per RdDQS delay group
+
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/// List for Technology specific functions that are supported
+typedef enum {
+  WlTrainingPrepareLrdimm,          ///< Technology specific tasks to prepare LRDIMMs for Training
+  LrdimmControlRegInit,             ///< Technology specific tasks to send control words to initialize an LRDIMM
+  LrdimmFreqChgCtrlWrd,             ///< Technology specific tasks to send control words to reprogram LRDIMM's register
+  LrdimmSendAllMRCmds,              ///< Technology specific tasks to send all MR commands
+  LrdimmRankMultiplication,         ///< Determine Rank Multiplication to be used
+  LrdimmBuf2DramTrain,              ///< Perform buffer to DRAM training for LRDIMMs
+  LrdimmSyncTrainedDlys,            ///< Copy trained delay of the first rank of a QR LRDIMM to the third rank
+  LrdimmPresence,                   ///< Perform LRDIMM specific tasks at the time of Dimm Presence Detection
+
+  NumberOfTechHooks                    ///< Size of list
+} TECHNOLOGY_SPECIFIC_FUNC_INDEX;
+
+/// Structure for RD DQS training RDDQS delays.
+typedef struct {
+  UINT32  PosRdDqsDly; ///< Positive RdDQS Delay
+  UINT32  NegRdDqsDly; ///< Negative RdDQS Delay
+} RD_DQS___;
+/// Structure for RD DQS training Vref delays
+typedef struct {
+  RD_DQS___  *Vref;///< pointer to Vref Entries
+  UINT8 Convolution[MAX_RD_DQS_ENTRIES]; ///< Total number of passes in each mask
+  UINT8 PosHeight[MAX_RD_DQS_ENTRIES/2]; ///< Positive Vref height Height per Delay
+  UINT8 NegHeight[MAX_RD_DQS_ENTRIES/2]; ///< Negative Vref height Height per Delay
+  UINT8 HalfDiamondHeight;   ///< Half of the Height per BL (height of pos/neg vref)
+  UINT8 MaxRdDqs; ///< Max RdDqs from convolution function
+} VREF___;
+/// Structure for RD DQS training Nibbles
+typedef struct {
+  VREF___  Lane[MAX_NUMBER_LANES]; ///< Bytelane or Nibble
+  UINT8 Vnom;  // Nominal Vref value
+  UINT8 MaxRdDqsSweep; // Maximum RdDqs Sweep size
+  UINT8 SmallestPosMaxVrefperCS[MAX____RDDQS_CS_PER_CHANNEL];  // Smallest Positive Max Vref per CS
+  UINT8 SmallestNegMaxVrefperCS[MAX____RDDQS_CS_PER_CHANNEL];  // Smallest Negative Max Vref per CS
+  UINT8 DiamondLeft[MAX____VREF_ENTRIES];          // Left edge of Diamond for shape display
+  UINT8 DiamondRight[MAX____VREF_ENTRIES];         // Left edge of Diamond for shape display
+} MEM____ENTRY;
+
+/// Structure for Technology block.
+typedef struct _MEM_TECH_BLOCK {
+  MEM_NB_BLOCK  *NBPtr; ///< point to northbridge block.
+  MEM_PARAMETER_STRUCT *RefPtr; ///< point to parameter list.
+
+  /* Temporary storage */
+  UINT32 HwcrLo; ///< value of HWCR.
+  UINT32 CR4reg; ///< CR4 register value.
+  UINT8  DramEcc; ///< value of Dram ECC bit.
+  UINT8  *TestBufPtr; ///< point to buffer to store read-back data.
+  UINT8  *PatternBufPtr; ///< point to pattern buffer.
+  UINT16 PatternLength; ///< the length of pattern buffer in cache lines.
+  UINT8  Direction; ///< direction during training.
+  UINT8  ChipSel; ///< chip select number.
+  INT8   RestartChipSel;    ///< is used to save the chipsel at which first RdDqsDly retrain is issued
+  UINT16 MaxDlyForMaxRdLat; ///< Largest possible value for Receiver enable delay.
+  UINT16 PrevSpeed; ///< Previous MemClk frequency
+  TRAINING_TYPE  TrainingType;  ///< Type of training currently being done
+  UINT8 TargetDIMM; ///< Target DIMM to being trained
+  INT16 WLCriticalDelay;  ///< Minimum WL Dly of all byte lanes and all DIMMs
+  UINT8 Bytelane; ///< Bytelane being trained
+  UINT8 TrnNibble; ///< Nibble being trained
+
+
+  UINT8  Pass; ///< current pass of training.
+  UINT16 DqsRdWrPosSaved;    ///< for position training byte lane saved flag
+  UINT16 DqsRcvEnSaved;      ///< for TrainRcvrEn UINT8 lane saved flag
+  UINT16 DqsRcvEnSavedS1; ///< for TrainRcvrEn UINT8 lane saved flag
+  UINT16 DqsRcvEnFirstPassVal; ///< for TrainRcvrEn UINT8 lane saved flag
+  BOOLEAN GetFirstPassVal; ///< If the first passing value has been found.
+  BOOLEAN RevertPassVal; ///< Flag to restart training during training process when glitch is found.
+  UINT8 MaxFilterDly; ///< Maximum filter delay value for RcvrTraining.
+  UINT16 RcvrEnDlyOpt[MAX_BYTELANES_PER_CHANNEL];     ///< Receiver Enable delay for optimized filter
+  UINT16 MaxRcvrEnDlyBlOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Max Receiver Enable delay for optimized filter
+  UINT16 RcvrEnDlyLimitOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Receiver Enable delay Limit for optimized filter
+  UINT16 FilterStatusOpt[MAX_BYTELANES_PER_CHANNEL];  ///< Filter status to indicate if a ByteLane is "DONE", "SKIP" or "CONTINUE"
+  UINT16 FilterCountOpt;  ///< Filter count to indicate the total number of ByteLanes completed
+  BOOLEAN DqsRcvEnSavedOpt[MAX_BYTELANES_PER_CHANNEL];      ///< for optimized TrainRcvrEn lane saved flag
+  UINT16 DqsRcvEnFirstPassValOpt[MAX_BYTELANES_PER_CHANNEL]; ///< for TrainRcvrEn UINT8 lane saved flag for optimized
+  BOOLEAN GetFirstPassValOpt[MAX_BYTELANES_PER_CHANNEL]; ///< If the first passing value has been found for optimized.
+  BOOLEAN RevertPassValOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Flag to restart training during training process when glitch is found for optimized.
+  UINT8 MaxFilterDlyBlOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Maximum filter delay value for RcvrTraining for optimized.
+  BOOLEAN IncBy1ForNextCountOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Used to determine when to increment by 1 in second stage of opt. rec. en. training
+  UINT8 FilterSidePassCountOpt[MAX_BYTELANES_PER_CHANNEL];  ///< Indicates that previous side passed
+  UINT16 DiffSeedGrossSeedPreGross[MAX_BYTELANES_PER_CHANNEL];  ///< Gross difference between GrossSeed and SeedPreGross for HwRxEn Training.
+  UINT16 PrevPassRcvEnDly[MAX_BYTELANES_PER_CHANNEL];  ///< Receiver Enable Delay value from the previous pass
+  BOOLEAN SmallDqsPosWindow; ///< Status flag to record small DQS position window event
+  UINT8 WlNibbleDly[MAX_BYTELANES_PER_CHANNEL];  ///< Nibble based trainig results for Nibble 0 of Write Levelization
+  UINT16 WlNibble0Seed[MAX_BYTELANES_PER_CHANNEL];  ///< Nibble based trainig seed value for Nibble 0 Write Levelization
+  UINT16 RxEnNibbleDly[MAX_BYTELANES_PER_CHANNEL];  ///< Nibble based trainig results for Nibble 0 of Rx En training
+  BOOLEAN ByteLaneError[MAX_BYTELANES_PER_CHANNEL]; ///< Indicates that an error has occured on a bytelane
+  UINT16 RxOrig[MAX_BYTELANES_PER_CHANNEL];  ///< Original RxEn Delays for seedless training
+
+  /* PUBLIC functions */
+  VOID (*SendAllMRCmds) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 ChipSel); ///< Send MRS command.
+  VOID (*FreqChgCtrlWrd) (struct _MEM_TECH_BLOCK *TechPtr); ///< Frequency change control word.
+  BOOLEAN (*SetDramMode) (struct _MEM_TECH_BLOCK *TechPtr); ///< Set dram mode (DDR2 or DDR3).
+  BOOLEAN (*DimmPresence) (struct _MEM_TECH_BLOCK *TechPtr); ///< determines if DIMMs present.
+  BOOLEAN (*SpdCalcWidth) (struct _MEM_TECH_BLOCK *TechPtr); ///< check the symmetry of DIMM pairs.
+  BOOLEAN (*SpdGetTargetSpeed) (struct _MEM_TECH_BLOCK *TechPtr); ///< get supported frequency.
+  BOOLEAN (*AutoCycTiming) (struct _MEM_TECH_BLOCK *TechPtr); ///< configure timing based on spd data.
+  BOOLEAN (*SpdSetBanks) (struct _MEM_TECH_BLOCK *TechPtr); ///< set bank address.
+  BOOLEAN (*SetDqsEccTmgs) (struct _MEM_TECH_BLOCK *TechPtr); ///< DQS training.
+  VOID (*GetCSIntLvAddr) (UINT8 BankEnc, UINT8 *LowBit, UINT8 *HiBit); ///< Get Chip select interleave address.
+  VOID (*AdjustTwrwr) (struct _MEM_TECH_BLOCK *TechPtr); ///< Adjust Twrwr for certain dimm technology.
+  VOID (*AdjustTwrrd) (struct _MEM_TECH_BLOCK *TechPtr); ///< Adjust Twrrd for certain dimm technology.
+  INT8 (*GetLD) (struct _MEM_TECH_BLOCK *TechPtr); ///< Get LD value for certain dimm technology.
+  VOID (*DramInit) (struct _MEM_TECH_BLOCK *TechPtr); ///< dram initialization.
+
+  /* PRIVATE functions */
+  VOID (*InitDQSPos4RcvrEn) (struct _MEM_TECH_BLOCK *TechPtr); ///< Initialize training register before training.
+  VOID (*SetRcvrEnDly) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver, UINT16 RcvEnDly); ///< Set receiver enable delay register value.
+  VOID (*LoadRcvrEnDly) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver); ///< Load receiver enable delay register value.
+  BOOLEAN (*SaveRcvrEnDly) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver, UINT16 RcvEnDly, UINT16 cmpResultRank0, UINT16 cmpResultRank1); ///< Save receiver enable delay register value.
+  BOOLEAN (*SaveRcvrEnDlyFilter) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver, UINT16 RcvEnDly, UINT16 cmpResultRank0, UINT16 cmpResultRank1); ///< saves passing DqsRcvEnDly values to the stack.
+  VOID (*ResetDCTWrPtr) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver); ///< resets the DCT input buffer write pointer.
+  UINT16 (*Compare1ClPattern) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Buffer[], UINT8 Pattern[]); ///< Compare training pattern of 1 cache line.
+  VOID (*SkipChipSelPass1) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 *ChipSel); ///< skips odd chip select if training at 800MT or above.
+  VOID (*SkipChipSelPass2) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 *ChipSel); ///< skips odd chip select if training at 800MT or above.
+  UINT16 (*CompareTestPatternFilter) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< compare training pattern with filter.
+  UINT8 (*MaxByteLanes) ( VOID ); ///< return maximum number of bytelanes.
+  VOID (*SetDQSDelayCSR) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 ByteLane, UINT8 Dly); ///< Set CSR.
+  VOID (*DQSWindowSave) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 ByteLane, UINT8 DlyMin, UINT8 DlyMax); ///< programs the trained DQS delay for the specified byte lane and stores its DQS window for reference.
+  BOOLEAN (*FindMaxDlyForMaxRdLat) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 *ChipSel); ///< Find maximum receiver enable delay value.
+  UINT8 (*DlyTableWidth) ( VOID ); ///< return the width of the delay tables (eg. RcvEnDlys, WrDqsDlys,...) in number of bytes.
+  UINT16 (*Compare1ClPatternOpt) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Buffer[], UINT8 Pattern[], UINT8 Side, UINT8 Receiver, BOOLEAN Side1En); ///< Compare training pattern of 1 cache line.
+  VOID (*LoadRcvrEnDlyOpt) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver); ///< Load receiver enable delay register value.
+  VOID (*SetRcvrEnDlyOpt) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver, UINT16 RcvEnDly); ///< Set receiver enable delay register value.
+  BOOLEAN (*CheckRcvrEnDlyLimitOpt) (struct _MEM_TECH_BLOCK *TechPtr); ///< Find limit for all bytelanes
+  UINT16 (*GetMaxValueOpt) (struct _MEM_TECH_BLOCK *TechPtr); ///<  Returns the max value of all bytelanes
+  VOID (*InitializeVariablesOpt) (struct _MEM_TECH_BLOCK *TechPtr); ///< Initialized variables for optimized training
+  BOOLEAN (*SetSweepErrorOpt)(struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver, UINT8 DCT, BOOLEAN ErrorCheck); ///< records any errors generated from optimized sweep
+  VOID (*LoadInitialRcvrEnDlyOpt) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver); ///< Load the starting value for receiver DQS training.
+  BOOLEAN (*GetDimmSpdBuffer) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 **SpdBuffer, UINT8 Dimm); ///< Gets pointer to spd buffer for a dimm on the current channel, if present
+  UINT8 (*GetMinMaxGrossDly) (struct _MEM_TECH_BLOCK *TechPtr, TRN_DLY_TYPE TrnDlyType, BOOLEAN IfMax); ///< Gets the minimum or maximum gross dly value
+
+  /* Technology Specific Hooks */
+  BOOLEAN (*(TechnologySpecificHook[NumberOfTechHooks])) (struct _MEM_TECH_BLOCK *TechPtr, VOID *OptParam); ///< Technology specific functions
+} MEM_TECH_BLOCK;
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+MemTDimmByteTrainInit (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTTrainMaxLatency (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSetDQSEccTmgs (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSetDQSEccTmgsRDdr3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTTrainRcvrEnSwPass1 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTTrainDQSEdgeDetectSw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTTrainDQSEdgeDetect (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTDramInitSw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+VOID
+MemTDramInitHw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+BOOLEAN
+MemTFeatDef (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+BOOLEAN
+MemTSaveRcvrEnDlyByteFilter (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly,
+  IN       UINT16 CmpResultRank0,
+  IN       UINT16 CmpResultRank1
+  );
+
+BOOLEAN
+MemTSaveRcvrEnDlyByteFilterOpt (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly,
+  IN       UINT16 CmpResultRank0,
+  IN       UINT16 CmpResultRank1
+  );
+
+BOOLEAN
+MemTNewRevTrainingSupport (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTTrainOptRcvrEnSwPass1 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTWriteLevelizationHw3Pass1 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTWriteLevelizationHw3Pass2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTPreparePhyAssistedTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTExitPhyAssistedTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTDqsTrainRcvrEnHwPass1 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTDqsTrainRcvrEnHwPass2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTSetWrDatRdDqs (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 WrDatDly
+  );
+
+VOID
+MemRecTTrainDQSPosSw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTTrainRcvrEnSw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTTrainRcvrEnHw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTTrainRcvrEnHwSeedless (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTBeginTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTEndTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSetSweepErrorOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT8 Dct,
+  IN       BOOLEAN ErrorCheck
+  );
+
+VOID
+MemTInitializeVariablesOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+UINT16
+MemTGetMaxValueOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTCheckRcvrEnDlyLimitOptByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTMarkTrainFail (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+);
+
+VOID
+MemTBeginTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTEndTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTSetDQSDelayAllCSR (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dly
+  );
+
+BOOLEAN
+MemTExitPhyAssistedTrainingClient3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTFindMaxRcvrEnDlyRdDqsDlyByte (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+     OUT   UINT8 *ChipSel
+  );
+
+BOOLEAN
+MemTFindMaxRcvrEnDlyRdDqsDlyByteUnb (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+     OUT   UINT8 *ChipSel
+  );
+
+VOID
+MemTSendCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 CmdNum,
+  IN       UINT8 Value
+  );
+
+VOID
+MemTCommonTechInit (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTLrdimmConstructor3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTRdPosWithRxEnDlySeeds3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTTrackRxEnSeedlessRdWrNoWindBLError (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  );
+
+BOOLEAN
+MemTTrackRxEnSeedlessRdWrSmallWindBLError (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   VOID *OptParam
+  );
+#endif  /* _MT_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/mu.h b/src/vendorcode/amd/agesa/f15/Proc/Mem/mu.h
new file mode 100644
index 0000000000..20d369bda2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/mu.h
@@ -0,0 +1,245 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mu.h
+ *
+ * Utility support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 52286 $ @e \$Date: 2011-05-04 03:48:21 -0600 (Wed, 04 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MU_H_
+#define _MU_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#ifndef PSO_ENTRY
+  #define PSO_ENTRY UINT8
+#endif
+
+//
+// Maximum value macro
+//
+#define MAX(X, Y) (((X) < (Y)) ? (Y) : (X))
+//
+// Minimum Value macro
+//
+#define MIN(X, Y) (((X) < (Y)) ? (X) : (Y))
+//
+// Absolute Value Macro
+//
+#define ABS(X) (((X) < 0) ? (-(X)) : (X))
+
+
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// Test patterns for DQS training
+typedef enum {
+  TestPattern0,             ///< Test pattern used in first pass of receiver enable training
+  TestPattern1,             ///< Test pattern used in first pass of receiver enable training
+  TestPattern2,             ///< Test pattern used in second pass of receiver enable training
+  TestPatternJD1B,          ///< 72-bit test pattern used in position training (ganged mode)
+  TestPatternJD1A,          ///< 72-bit test pattern used in position training
+  TestPatternJD256B,        ///< 256-bit test pattern used in position training (ganged mode)
+  TestPatternJD256A,        ///< 256-bit test pattern used in position training
+  TestPatternML,            ///< Test pattern used in first pass of max latency training
+  TestPattern3,             ///< Test pattern used in first pass of receiver enable training
+  TestPattern4              ///< Test pattern used in first pass of receiver enable training
+} TRAIN_PATTERN;
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+MemUWriteCachelines (
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemUReadCachelines (
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+VOID
+MemUDummyCLRead (
+  IN       UINT32 Address
+  );
+
+VOID
+MemUFlushPattern (
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  );
+
+
+VOID
+MemUFillTrainPattern (
+  IN       TRAIN_PATTERN Pattern,
+  IN       UINT8 Buffer[],
+  IN       UINT16 Size
+  );
+
+UINT32
+MemUSetUpperFSbase (
+  IN       UINT32 Address,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID
+MemUSetTargetWTIO (
+  IN       UINT32 Address,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID
+MemUResetTargetWTIO (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID
+MemUProcIOClFlush (
+  IN       UINT32 Address,
+  IN       UINT16 ClCount,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID
+MemUWait10ns (
+  IN       UINT32 Count,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID
+MemUGetWrLvNblErr (
+  IN OUT   UINT16 *ErrBitmap,
+  IN       UINT32 TestAddr,
+  IN       UINT16 ClCount
+  );
+
+VOID
+AlignPointerTo16Byte (
+  IN OUT   UINT8 **BufferPtrPtr
+  );
+
+VOID *
+FindPSOverrideEntry (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       PSO_ENTRY EntryType,
+  IN       UINT8 SocketID,
+  IN       UINT8 ChannelID,
+  IN       UINT8 DimmID,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT8
+GetMaxDimmsPerChannel (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN UINT8 SocketID,
+  IN UINT8 ChannelID
+  );
+
+UINT8
+GetMaxChannelsPerSocket (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN UINT8 SocketID,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT8
+GetMaxCSPerChannel (
+  IN      PSO_TABLE *PlatformMemoryConfiguration,
+  IN      UINT8 SocketID,
+  IN      UINT8 ChannelID
+  );
+
+UINT8
+GetSpdSocketIndex (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN UINT8 SocketID,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT8
+GetSpdChannelIndex (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN UINT8 SocketID,
+  IN UINT8 ChannelID,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+UINT32
+GetVarMtrrHiMsk (
+  IN       CPU_LOGICAL_ID *LogicalIdPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+MemUMFenceInstr (
+  VOID
+  );
+
+UINT32
+MemUnsToMemClk (
+  IN       MEMORY_BUS_SPEED Speed,
+  IN       UINT32 NumberOfns
+  );
+#endif  /* _MU_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/CPU/cpuRecovery.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/CPU/cpuRecovery.c
new file mode 100644
index 0000000000..4593c60228
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/CPU/cpuRecovery.c
@@ -0,0 +1,103 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Recovery API, and related functions.
+ *
+ * Contains code that implements the CPU Recovery functionality
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Recovery/CPU
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ **/
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "cpuRecovery.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_CPU_CPURECOVERY_FILECODE
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Performs CPU related initialization at the recovery entry point
+ *
+ * This function processes the MSR and PCI register tables.
+ *
+ * @param[in]  CpuRecoveryParams     Required input parameters for recovery CPU
+ *                                   initialization.
+ *
+ * @retval     AGESA_SUCCESS         Always succeeds.
+ *
+ */
+AGESA_STATUS
+AmdCpuRecovery (
+  IN       AMD_CPU_RECOVERY_PARAMS *CpuRecoveryParams
+  )
+{
+  SetRegistersFromTables (&CpuRecoveryParams->PlatformConfig, &CpuRecoveryParams->StdHeader);
+  LoadMicrocodePatch (&CpuRecoveryParams->StdHeader);
+  return (AGESA_SUCCESS);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/CPU/cpuRecovery.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/CPU/cpuRecovery.h
new file mode 100644
index 0000000000..a0fe607d39
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/CPU/cpuRecovery.h
@@ -0,0 +1,76 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Recovery API, and related function prototypes.
+ *
+ * Contains code that implements the CPU Recovery functionality
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Recovery/CPU
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+#ifndef _CPU_RECOVERY_H_
+#define _CPU_RECOVERY_H_
+
+/*----------------------------------------------------------------------------------------
+ *          M I X E D   (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                 D E F I N I T I O N S     A N D     M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *               T Y P E D E F S,   S T R U C T U R E S,    E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                        F U N C T I O N    P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+//                          These are   P U B L I C   functions
+AGESA_STATUS
+AmdCpuRecovery (
+  IN       AMD_CPU_RECOVERY_PARAMS *CpuRecoveryParams
+  );
+
+#endif // _CPU_RECOVERY_H_
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/HT/htInitRecovery.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/HT/htInitRecovery.c
new file mode 100644
index 0000000000..2fdce7b26d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/HT/htInitRecovery.c
@@ -0,0 +1,168 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Init the Socket and Node maps for Recovery mode.
+ *
+ * Create the Socket and Node maps just like normal boot,
+ * except that they only indicate the BSC is present.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_HT_HTINITRECOVERY_FILECODE
+
+AGESA_STATUS
+AmdHtInitRecovery (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get new Socket and Node Maps.
+ *
+ * Put the Socket Die Table and the Node Table in heap with known handles.
+ *
+ * @param[out]    SocketDieToNodeMap   The Socket, Module to Node info map
+ * @param[out]    NodeToSocketDieMap   The Node to Socket, Module map.
+ * @param[in]     StdHeader            Header for library and services.
+ */
+VOID
+STATIC
+NewNodeAndSocketTablesRecovery (
+     OUT   SOCKET_DIE_TO_NODE_MAP *SocketDieToNodeMap,
+     OUT   NODE_TO_SOCKET_DIE_MAP *NodeToSocketDieMap,
+  IN       AMD_CONFIG_PARAMS      *StdHeader
+  )
+{
+  UINT8 i;
+  UINT8 j;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  // Allocate heap for the table
+  AllocHeapParams.RequestedBufferSize = (((MAX_SOCKETS) * (MAX_DIES)) * sizeof (SOCKET_DIE_TO_NODE_ITEM));
+  AllocHeapParams.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+    // HeapAllocateBuffer must set BufferPtr to valid or NULL.
+    *SocketDieToNodeMap = (SOCKET_DIE_TO_NODE_MAP)AllocHeapParams.BufferPtr;
+    ASSERT (SocketDieToNodeMap != NULL);
+    // Initialize shared data structures
+    for (i = 0; i < MAX_SOCKETS; i++) {
+      for (j = 0; j < MAX_DIES; j++) {
+        (**SocketDieToNodeMap)[i][j].Node = HT_LIST_TERMINAL;
+        (**SocketDieToNodeMap)[i][j].LowCore = HT_LIST_TERMINAL;
+        (**SocketDieToNodeMap)[i][j].HighCore = HT_LIST_TERMINAL;
+      }
+    }
+  }
+  // Allocate heap for the table
+  AllocHeapParams.RequestedBufferSize = (MAX_NODES * sizeof (NODE_TO_SOCKET_DIE_ITEM));
+  AllocHeapParams.BufferHandle = NODE_ID_MAP_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+    // HeapAllocateBuffer must set BufferPtr to valid or NULL.
+    *NodeToSocketDieMap = (NODE_TO_SOCKET_DIE_MAP)AllocHeapParams.BufferPtr;
+    ASSERT (NodeToSocketDieMap != NULL);
+    // Initialize shared data structures
+    for (i = 0; i < MAX_NODES; i++) {
+      (**NodeToSocketDieMap)[i].Socket = HT_LIST_TERMINAL;
+      (**NodeToSocketDieMap)[i].Die = HT_LIST_TERMINAL;
+    }
+  }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize the Node and Socket maps for an AP Core.
+ *
+ * In each core's local heap, create a Node to Socket map and a Socket/Module to Node map.
+ * The mapping is filled in by reading the AP Mailboxes from PCI config on each node.
+ *
+ * @param[in]    StdHeader    global state, input data
+ *
+ * @retval       AGESA_SUCCESS  Always succeeds.
+ */
+AGESA_STATUS
+AmdHtInitRecovery (
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  AP_MAILBOXES NodeApMailBox;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  SOCKET_DIE_TO_NODE_MAP SocketDieToNodeMap = NULL;
+  NODE_TO_SOCKET_DIE_MAP NodeToSocketDieMap = NULL;
+
+  NodeApMailBox.ApMailInfo.Info = 0;
+  NodeApMailBox.ApMailExtInfo.Info = 0;
+
+  // Allocate heap for caching the mailboxes
+  AllocHeapParams.RequestedBufferSize = sizeof (AP_MAILBOXES);
+  AllocHeapParams.BufferHandle = LOCAL_AP_MAIL_BOX_CACHE_HANDLE;
+  AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+  if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+    *(AP_MAILBOXES *)AllocHeapParams.BufferPtr = NodeApMailBox;
+  }
+
+  NewNodeAndSocketTablesRecovery (&SocketDieToNodeMap, &NodeToSocketDieMap, StdHeader);
+  // HeapAllocateBuffer must set BufferPtr to valid or NULL, so the checks below are ok.
+
+  // There is no option to not have socket - node maps, if they aren't allocated that is a fatal bug.
+  ASSERT (SocketDieToNodeMap != NULL);
+  ASSERT (NodeToSocketDieMap != NULL);
+
+  (*SocketDieToNodeMap)[0][0].Node = 0;
+  (*SocketDieToNodeMap)[0][0].LowCore = 0;
+  (*SocketDieToNodeMap)[0][0].HighCore = 0;
+
+  // We lie about being Socket 0 and Module 0 always, it isn't necessarily true.
+  (*NodeToSocketDieMap)[0].Socket = (UINT8)0;
+  (*NodeToSocketDieMap)[0].Die = (UINT8)0;
+
+  return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/HT/htInitReset.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/HT/htInitReset.c
new file mode 100644
index 0000000000..9e8b4efdb1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/HT/htInitReset.c
@@ -0,0 +1,332 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Recovery HT, a Hypertransport init for Boot Blocks.  For normal
+ * boots, run Recovery HT first in boot block, then run full HT init
+ * in the system BIOS.  Recovery HT moves the devices on the chain with
+ * the southbridge to their assigned device IDS, so that all their PCI
+ * Config space is accessible.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Recovery HyperTransport
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "AdvancedApi.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_HT_HTINITRESET_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_NODES 1
+#define MAX_LINKS 8
+
+extern CONST AMD_HT_RESET_INTERFACE HtOptionResetDefaults;
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Our global state data structure.
+ *
+ * Keep track of inputs and outputs, and keep any working state.
+ */
+typedef struct {
+  AMD_HT_RESET_INTERFACE      *HtBlock;       ///< The interface
+  AGESA_STATUS                Status;         ///< Remember the highest severity status event
+  VOID                        *ConfigHandle;  ///< Config Pointer, opaque handle for passing to lib
+} HTR_STATE_DATA;
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ ***               FAMILY/NORTHBRIDGE SPECIFIC FUNCTIONS                 ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable Routing Tables.
+ *
+ * Turns routing tables on for a node zero.
+ *
+ * @param[in] State Our State
+ */
+
+VOID
+STATIC
+HtrEnableRoutingTables (
+  IN HTR_STATE_DATA *State
+  )
+{
+  PCI_ADDR Reg;
+  UINT32 Temp;
+  Temp = 0;
+  Reg.AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0x6C);
+  LibAmdPciWriteBits (Reg, 0, 0, &Temp, State->ConfigHandle);
+}
+
+/***************************************************************************
+ ***                       Non-coherent init code                        ***
+ ***                             Algorithms                              ***
+ ***************************************************************************/
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Process the SouthBridge Link.
+ *
+ * Process a non-coherent link, and setting the device ID for all devices found.
+ *
+ * @param[in] State Our State, Inputs
+ */
+VOID
+STATIC
+HtrProcessLink (
+  IN HTR_STATE_DATA *State
+  )
+{
+  UINT32 CurrentBUID;
+  UINT32 Temp;
+  UINT32 UnitIDcnt;
+  PCI_ADDR CurrentPtr;
+  UINT8 Depth;
+  BUID_SWAP_LIST *SwapPtr;
+  PCI_ADDR Link1ControlRegister;
+  BOOLEAN IsCaveDevice;
+
+  // No PCI init to run, everything has to be on Bus zero.  This makes fewer
+  // northbridge dependencies.
+  //
+  // Assign BUIDs so that config space for all devices is visible.
+  //
+  if (State->HtBlock->ManualBuidSwapList != NULL) {
+    // Manual non-coherent BUID assignment
+    // Assign BUID's per manual override
+    //
+    SwapPtr = &(State->HtBlock->ManualBuidSwapList->SwapList);
+    Depth = 0;
+    while (SwapPtr->Swaps[Depth].FromId != 0xFF) {
+      CurrentPtr.AddressValue = MAKE_SBDFO (0, 0, SwapPtr->Swaps[Depth].FromId, 0, 0);
+
+      do {
+        LibAmdPciFindNextCap (&CurrentPtr, State->ConfigHandle);
+        ASSERT (CurrentPtr.AddressValue != ILLEGAL_SBDFO);
+        LibAmdPciRead (AccessWidth32, CurrentPtr, &Temp, State->ConfigHandle);
+      } while ((Temp & (UINT32)0xE00000FF) != (UINT32)0x00000008); // HyperTransport Slave Capability
+
+      CurrentBUID = SwapPtr->Swaps[Depth].ToId;
+      // Set the device's BUID
+      LibAmdPciWriteBits (CurrentPtr, 20, 16, &CurrentBUID, State->ConfigHandle);
+      Depth++;
+    }
+  } else {
+    // Automatic non-coherent device detection
+    Depth = 0;
+    CurrentBUID = 1;
+    for (;;) {
+      CurrentPtr.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0);
+
+      LibAmdPciRead (AccessWidth32, CurrentPtr, &Temp, State->ConfigHandle);
+      if (Temp == (UINT32)0xFFFFFFFF) {
+        // No device found at currentPtr
+        break;
+      }
+
+      // HyperTransport Slave Capability
+      do {
+        LibAmdPciFindNextCap (&CurrentPtr, State->ConfigHandle);
+        if (CurrentPtr.AddressValue == ILLEGAL_SBDFO) {
+          // There is a device at currentPtr, but it isn't an HT device.
+          return;
+        }
+        LibAmdPciRead (AccessWidth32, CurrentPtr, &Temp, State->ConfigHandle);
+      } while ((Temp & (UINT32)0xE00000FF) != (UINT32)0x00000008); // HyperTransport Slave Capability
+
+      // Get the device's Unit ID Count.
+      LibAmdPciReadBits (CurrentPtr, 25, 21, &UnitIDcnt, State->ConfigHandle);
+      if ((UnitIDcnt + CurrentBUID) > 24) {
+        // An error handler for the case where we run out of BUID's on a chain
+        State->Status = AGESA_ERROR;
+        ASSERT (FALSE);
+        return;
+      }
+      // While we are still certain we are accessing this device, remember if it is a cave device.
+      // This is found by reading EOC from the Link 1 Control Register.
+      Link1ControlRegister = CurrentPtr;
+      Link1ControlRegister.Address.Register += 8;
+      LibAmdPciReadBits (Link1ControlRegister, 6, 6, &Temp, State->ConfigHandle);
+      IsCaveDevice = ((Temp == 0) ? FALSE : TRUE);
+
+      // Set the device's BUID
+      IDS_HDT_CONSOLE (HT_TRACE, "Device found at depth=%d.\n", Depth);
+      LibAmdPciWriteBits (CurrentPtr, 20, 16, &CurrentBUID, State->ConfigHandle);
+
+      CurrentPtr.Address.Device = CurrentBUID;
+      // Get the device's BUID
+      LibAmdPciReadBits (CurrentPtr, 20, 16, &Temp, State->ConfigHandle);
+      if (Temp != CurrentBUID) {
+        if ((Depth == 0) && IsCaveDevice) {
+          // If the chain only consists of a single cave device, that device may have retained zero
+          // for it's BUID.
+          CurrentPtr.Address.Device = 0;
+          LibAmdPciReadBits (CurrentPtr, 20, 16, &Temp, State->ConfigHandle);
+          if (Temp == 0) {
+            // Per HyperTransport specification, devices not accepting BUID reassignment hardwire BUID to zero.
+            Depth++;
+            // Success!
+            IDS_HDT_CONSOLE (HT_TRACE, "Compliant Cave at BUID=0.\n");
+            break;
+          } else if (Temp == CurrentBUID) {
+            // and then, there are the other kind of devices ....
+            // Restore the writable BUID field (which contains the value we just wrote) to zero.
+            Temp = 0;
+            LibAmdPciWriteBits (CurrentPtr, 20, 16, &Temp, State->ConfigHandle);
+            Depth++;
+            // Success!
+            IDS_HDT_CONSOLE (HT_TRACE, "Cave left at BUID=0.\n");
+            break;
+          }
+        }
+        // An error handler for this critical error
+        State->Status = AGESA_ERROR;
+        ASSERT (FALSE);
+        return;
+      }
+
+      IDS_HDT_CONSOLE (HT_TRACE, "Compliant Device assigned at BUID=%d.\n", CurrentBUID);
+      Depth++;
+      CurrentBUID += UnitIDcnt;
+    }
+    // Provide information on automatic device results
+    State->HtBlock->Depth = Depth;
+  }
+}
+
+/***************************************************************************
+ ***                           HT Reset Initialize                    ***
+ ***************************************************************************/
+
+/**
+ * A constructor for the HyperTransport input structure.
+ *
+ * Sets inputs to valid, basic level, defaults.
+ *
+ * @param[in]     StdHeader             Config handle
+ * @param[in,out] AmdHtResetInterface   HT Interface structure to initialize.
+ *
+ * @retval AGESA_SUCCESS      Constructors are not allowed to fail
+*/
+AGESA_STATUS
+AmdHtResetConstructor (
+  IN       AMD_CONFIG_PARAMS         *StdHeader,
+  IN       AMD_HT_RESET_INTERFACE    *AmdHtResetInterface
+  )
+{
+  AmdHtResetInterface->ManualBuidSwapList = HtOptionResetDefaults.ManualBuidSwapList;
+  return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize HT for Reset, Boot Blocks.
+ *
+ * This is the top level external interface for Hypertransport Reset Initialization.
+ * Create our initial internal state and initialize the non-coherent chain to the
+ * southbridge.  This interface must be executed by both normal and recovery boot paths.
+ *
+ * @param[in]  StdHeader                 Interface structure
+ * @param[in]  AmdHtResetInterface       our interface and inputs
+ *
+ * @retval AGESA_SUCCESS Successful init
+ * @retval AGESA_ERROR   Device Error, BUID max exceed error.
+ *
+ */
+AGESA_STATUS
+AmdHtInitReset (
+  IN       AMD_CONFIG_PARAMS        *StdHeader,
+  IN       AMD_HT_RESET_INTERFACE   *AmdHtResetInterface
+  )
+{
+  HTR_STATE_DATA State;
+  AGESA_STATUS IgnoredStatus;
+
+  State.Status = AGESA_SUCCESS;
+  if (IsBsp (StdHeader, &IgnoredStatus)) {
+    State.ConfigHandle = (AMD_CONFIG_PARAMS *)StdHeader;
+    State.HtBlock = AmdHtResetInterface;
+    HtrEnableRoutingTables (&State);
+
+    HtrProcessLink (&State);
+  }
+  return State.Status;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnc32.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnc32.c
new file mode 100644
index 0000000000..0532373d15
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnc32.c
@@ -0,0 +1,725 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnc32.c
+ *
+ * Common Northbridge  functions for C32 Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 48317 $ @e \$Date: 2011-03-07 10:38:14 -0700 (Mon, 07 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mm.h"
+#include "mn.h"
+#include "mrnc32.h"
+#include "heapManager.h"
+#include "AdvancedApi.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_C32_MRNC32_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DIES_PER_SOCKET     2
+#define MAX_DCTS_PER_DIE 2
+#define SPLIT_CHANNEL   0x20000000
+#define CHANNEL_SELECT  0x10000000
+#define MAX_DELAYS    9   /* 8 data bytes + 1 ECC byte */
+#define MAX_DIMMS     4   /* 4 DIMMs per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableC32 (
+  IN OUT   TSEFO *NBRegTable
+  );
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+VOID
+STATIC
+MemRecNSwitchNodeC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 NodeID
+  );
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+STATIC CONST UINT32 RecModeDefRegArrayC32[] = {
+  BFDramControlReg,  0x320C2A06,
+  BFDramBankAddrReg, 0x00001111,
+  BFDramMRSReg,      0x000400A4,
+  BFDramTimingLoReg, 0x000A0092,
+  BFDramTimingHiReg, 0xB6D218FF,
+  BFDramConfigLoReg, 0x00000000,
+  BFDramConfigHiReg, 0x1F48010B,
+  NULL
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]       NodeID   - Node ID for this NB block
+ *
+ *     @return          TRUE  - This node is a C32 and this NB block has been initialized
+ *     @return          FALSE - This node is not a C32
+ */
+
+BOOLEAN
+MemRecConstructNBBlockC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 i;
+  UINT8 Dct;
+  UINT8 Channel;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemRecNIsIdSupportedC32 (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  MCTPtr = &MemPtr->DiesPerSystem[NodeID];
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_C32 * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_C32 * (
+                                              sizeof (CH_DEF_STRUCT) + (
+                                                MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES
+                                              )
+                                            )
+                                          )
+                                        ) + (sizeof (TSEFO) * BFEndOfList);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    return FALSE;
+  }
+
+  MemPtr->DieCount = MAX_DIES_PER_SOCKET;
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_C32;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  MemPtr->DiesPerSystem[NodeID + 1].DctCount = MAX_DCTS_PER_NODE_C32;
+  MemPtr->DiesPerSystem[NodeID + 1].DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_C32 * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_C32; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_C32;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = (MCTPtr->DieId * 2) + Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_C32 * sizeof (CH_DEF_STRUCT);
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_C32; Channel++) {
+      MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2;
+      MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr;
+      MCTPtr->DctData[Dct].ChData[Channel].Dct = Dct;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+    }
+  }
+
+  //
+  //  Initialize NB block's variables
+  //
+  NBPtr->NBRegTable = (TSEFO *) AllocHeapParams.BufferPtr;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->AllNodeMCTPtr = &MemPtr->DiesPerSystem[NodeID];
+  NBPtr->SPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+  NBPtr->AllNodeSPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+
+  MemRecNInitNBRegTableC32 (NBPtr->NBRegTable);
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->VarMtrrHiMsk = MemRecGetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+  LibAmdMemFill (NBPtr->IsSupported, FALSE, sizeof (NBPtr->IsSupported), &NBPtr->MemPtr->StdHeader);
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) MemRecDefTrue;
+  }
+
+  NBPtr->InitRecovery = MemRecNMemInitNb;
+
+  NBPtr->RecModeDefRegArray = RecModeDefRegArrayC32;
+
+  NBPtr->SwitchNodeRec = MemRecNSwitchNodeC32;
+  NBPtr->SwitchDCT = MemRecNSwitchDctC32;
+  NBPtr->SwitchChannel = MemRecNSwitchChannelC32;
+  NBPtr->SetMaxLatency = MemRecNSetMaxLatencyNb;
+  NBPtr->GetSysAddrRec = MemRecNGetMCTSysAddrNb;
+  NBPtr->SendMrsCmd = MemRecNSendMrsCmdNb;
+  NBPtr->sendZQCmd = MemRecNSendZQCmdNb;
+  NBPtr->SetDramOdtRec = MemRecNSetDramOdtNb;
+
+  NBPtr->GetBitField = MemRecNGetBitFieldNb;
+  NBPtr->SetBitField = MemRecNSetBitFieldNb;
+  NBPtr->GetTrainDly = MemRecNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemRecNSetTrainDlyNb;
+
+  NBPtr->MemRecNCmnGetSetFieldNb = MemRecNCmnGetSetFieldC32;
+  NBPtr->MemRecNcmnGetSetTrainDlyNb = MemRecNcmnGetSetTrainDlyC32;
+  NBPtr->MemRecNSwitchDctNb = MemRecNSwitchDctC32;
+  NBPtr->TrainingFlow = MemNRecTrainingFlowNb;
+  NBPtr->MemRecNInitializeMctNb = MemRecNInitializeMctC32;
+  NBPtr->MemRecNFinalizeMctNb = MemRecNFinalizeMctC32;
+  NBPtr->IsSupported[DramModeAfterDimmPres] = TRUE;
+  MemRecNSwitchDctC32 (NBPtr, 0);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the current die to work on.
+ *   Should be called before accessing a certain die
+ *   All data structures will be updated to point to the current node
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   NodeID - ID of the target die
+ *
+ */
+
+VOID
+STATIC
+MemRecNSwitchNodeC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 NodeID
+  )
+{
+  NBPtr->MCTPtr = &(NBPtr->AllNodeMCTPtr[NodeID]);
+  NBPtr->Node = NodeID;
+  NBPtr->MCTPtr->NodeId = NodeID;
+  MemRecNSwitchDctC32 (NBPtr, NBPtr->Dct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current DCT to work on.
+ *   Should be called before accessing a certain DCT
+ *   All data structures will be updated to point to the current DCT
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Dct - ID of the target DCT
+ *
+ */
+
+VOID
+MemRecNSwitchDctC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  )
+{
+  NBPtr->Dct = Dct & 1;
+  NBPtr->SPDPtr = &(NBPtr->AllNodeSPDPtr[(NBPtr->MCTPtr->NodeId * MAX_DCTS_PER_DIE + Dct) * MAX_DIMMS_PER_CHANNEL]);
+  NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]);
+
+  MemRecNSwitchChannelC32 (NBPtr, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current channel to work on.
+ *   Should be called before accessing a certain channel
+ *   All data structures will be updated to point to the current channel
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Channel - ID of the target channel
+ *
+ */
+
+VOID
+MemRecNSwitchChannelC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  )
+{
+  NBPtr->Channel = 0;
+  NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[0]);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or set DQS timing during training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  UINT16 index;
+  UINT16 offset;
+  UINT32 value;
+  UINT32 address;
+  UINT8 DIMM;
+  UINT8 Rank;
+  UINT8 Byte;
+  UINT8 Nibble;
+
+  DIMM = DRBN_DIMM (DrbnVar);
+  Rank = DRBN_RANK (DrbnVar);
+  Byte = DRBN_BYTE (DrbnVar);
+  Nibble = DRBN_NBBL (DrbnVar);
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+    index = 0x10;
+    break;
+  case AccessWrDqsDly:
+    index = 0x30;
+    break;
+  case AccessWrDatDly:
+    index = 0x01;
+    break;
+  case AccessRdDqsDly:
+    index = 0x05;
+    break;
+  case AccessPhRecDly:
+    index = 0x50;
+    break;
+  default:
+    index = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+  case AccessWrDqsDly:
+    index += (DIMM * 3);
+    if ((Byte & 0x04) != 0) {
+      // if byte 4,5,6,7
+      index += 0x10;
+    }
+    if ((Byte & 0x02) != 0) {
+      // if byte 2,3,6,7
+      index++;
+    }
+    if (Byte > 7) {
+      index += 2;
+    }
+    offset = 16 * (Byte % 2);
+    index |= (Rank << 8);
+    index |= (Nibble << 9);
+    break;
+
+  case AccessRdDqsDly:
+    Field &= ~ 0x0001;
+  case AccessWrDatDly:
+    index += (DIMM * 0x100);
+    if (Nibble != 0) {
+      if (Rank != 0) {
+        index += 0xA0;
+      } else {
+        index += 0x70;
+      }
+    } else if (Rank != 0) {
+      index += 0x60;
+    }
+    // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+    // to run AccessPhRecDly sequence.
+  case AccessPhRecDly:
+    index += (Byte / 4);
+    offset = 8 * (Byte % 4);
+    break;
+  default:
+    offset = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  address = index;
+  MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, address);
+  while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+  value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+
+  if (IsSet != 0) {
+    if (TrnDly == AccessPhRecDly) {
+      value = NBPtr->DctCachePtr->PhRecReg[index & 0x03];
+    }
+
+    value = ((UINT32)Field << offset) | (value & (~((UINT32)0xFF << offset)));
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, value);
+    address |= DCT_ACCESS_WRITE;
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, address);
+    while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+    if (TrnDly == AccessPhRecDly) {
+      NBPtr->DctCachePtr->PhRecReg[index & 0x03] = value;
+    }
+  } else {
+    value = (value >> offset) & 0xFF;
+  }
+
+  return value;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Name of Field to be set
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  SBDFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+
+  Value = 0;
+  if (FieldName < BFEndOfList) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address != 0) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = TSEFO_TYPE (Address);
+
+      // If Fn2 and DCT1 selected, set Address to be 1xx
+      if (((Address & 0xF000) == 0x2000) && (NBPtr->Dct != 0)) {
+        Address |= 0x0100;
+      }
+      if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) {
+        // Special DCT Phy access
+        Address &= 0x0FFFFFFF;
+        Lowbit = 0;
+        Highbit = 16;
+      } else {
+        // Normal DCT Phy access
+        Address = TSEFO_OFFSET (Address);
+      }
+
+
+      if (Type == NB_ACCESS) {
+        // Address |= (((UINT32) (24 + 0)) << 15);
+        PciAddr.AddressValue = Address;
+        // Fix for MCM
+        PciAddr.Address.Device = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Device;
+        PciAddr.Address.Bus = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Bus;
+        PciAddr.Address.Segment = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Segment;
+        Address = PciAddr.AddressValue;
+        LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+      } else if (Type == DCT_PHY_ACCESS) {
+        MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+        while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+        Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+      } else {
+        IDS_ERROR_TRAP;
+      }
+
+      if (IsSet != 0) {
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        } else {
+          Mask = (UINT32)0xFFFFFFFF;
+        }
+        Value &= ~(Mask << Lowbit);
+        Value |= (Field & Mask) << Lowbit;
+
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          LibAmdPciWrite (AccessWidth32, PciAddr , &Value, &NBPtr->MemPtr->StdHeader);
+        } else if (Type == DCT_PHY_ACCESS) {
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+        } else {
+          IDS_ERROR_TRAP;
+        }
+      } else {
+        Value = Value >> Lowbit;  // Shift
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes bit field translation table
+ *
+*     @param[in,out]   *NBRegTable   - Pointer to the NB Table *
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableC32 (
+  IN OUT   TSEFO *NBRegTable
+  )
+{
+  UINT16 i;
+  for (i = 0; i <= BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31,  0, BFDevVendorIDReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  2,  0, BFNodeID);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31,  0, BFDramControlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31,  0, BFDramMRSReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  9,  7, BFDramTerm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31,  0, BFDramTimingHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4),  4,  0, BFNbFid);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFLevel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  0,  0, BFInitDram);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  8,  8, BFDdr3Mode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  9,  9, BFLegacyBiosMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  5,  5, BFSubMemclkRegDly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  6,  6, BFOdtSwizzle);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15, 8, BFCtrlWordCS);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  8, 8, BFDramEnabled);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 0, BFDctSelBaseAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 0, BFDctSelBaseOffsetReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 31,  0, BFMctCfgHiReg);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  1,  1, BFWrtLvTrMode);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp);
+
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemRecNIsIdSupportedC32
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ *     @return          TRUE -  This node is a C32.
+ *     @return          FALSE - This node is not a C32.
+ *
+ */
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+  if ((LogicalIdPtr->Revision & AMD_F10_C32_ALL) != 0) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnc32.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnc32.h
new file mode 100644
index 0000000000..2a2f277a20
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnc32.h
@@ -0,0 +1,109 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnc32.h
+ *
+ * Northbridge C32 Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MRNC32_H_
+#define _MRNC32_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DCTS_PER_NODE_C32          2
+#define MAX_CHANNELS_PER_DCT_C32       1
+
+#define _4GB_RJ8    ((UINT32)4 << (30 - 8))
+#define MTRR_VALID  11
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemRecConstructNBBlockC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemRecNSwitchDctC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  );
+
+VOID
+MemRecNSwitchChannelC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  );
+
+VOID
+MemRecNFinalizeMctC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemRecNInitializeMctC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MRNC32_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnmctc32.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnmctc32.c
new file mode 100644
index 0000000000..0216cd81c5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnmctc32.c
@@ -0,0 +1,161 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnmctc32.c
+ *
+ * Northbridge C32 MCT supporting functions Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mrnc32.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_C32_MRNMCTC32_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets final values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNFinalizeMctC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+  // Recommended settings for F2x11C
+  MemRecNSetBitFieldNb (NBPtr, BFMctCfgHiReg, 0x2CE00F60);
+
+  LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  if (!NBPtr->ClToNbFlag) {
+    SMsr.lo &= ~((UINT32) 1 << 15);                // ClLinesToNbDis
+  }
+  LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.hi &= ~((UINT32) 1 << (48 - 32));               // WbEnhWsbDis
+  LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets initial values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNInitializeMctC32 (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+  LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  if (SMsr.lo & ((UINT32) 1 << 15)) {
+    NBPtr->ClToNbFlag = TRUE;
+  }
+  SMsr.lo |= (UINT32) 1 << 15;                   // ClLinesToNbDis
+  LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.hi |= (UINT32) 1 << (48 - 32);              // WbEnhWsbDis
+  LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnprotoc32.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnprotoc32.c
new file mode 100644
index 0000000000..f60b28bfee
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/C32/mrnprotoc32.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnprotoc32.c
+ *
+ * Northbridge support functions for Errata and early samples Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+
+#include "AGESA.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_C32_MRNPROTOC32_FILECODE
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DA/mrnda.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DA/mrnda.c
new file mode 100644
index 0000000000..0b8c0761bb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DA/mrnda.c
@@ -0,0 +1,665 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnda.c
+ *
+ * Common Northbridge  functions for Ridgeback Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 48317 $ @e \$Date: 2011-03-07 10:38:14 -0700 (Mon, 07 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mrnda.h"
+#include "heapManager.h"
+#include "AdvancedApi.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_DA_MRNDA_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define SPLIT_CHANNEL   0x20000000
+#define CHANNEL_SELECT  0x10000000
+#define MAX_DELAYS    9   /* 8 data bytes + 1 ECC byte */
+#define MAX_DIMMS     4   /* 4 DIMMs per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableDA (
+  IN OUT   TSEFO *NBRegTable
+  );
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+STATIC CONST UINT32 RecModeDefRegArrayDA[] = {
+  BFDramControlReg,  0x320C2A06,
+  BFDramBankAddrReg, 0x00001111,
+  BFDramMRSReg,      0x000400A4,
+  BFDramTimingLoReg, 0x000A0092,
+  BFDramTimingHiReg, 0xB6D218FF,
+  BFDramConfigLoReg, 0x00000000,
+  BFDramConfigHiReg, 0x1F48010B,
+  NULL
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]       NodeID   - Node ID for this NB block
+ *
+ *     @return          TRUE  - This node is a RB and this NB block has been initialized
+ *     @return          FALSE - This node is not a RB
+ */
+
+BOOLEAN
+MemRecConstructNBBlockDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 i;
+  UINT8 Dct;
+  UINT8 Channel;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemRecNIsIdSupportedDA (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  MCTPtr = &MemPtr->DiesPerSystem[NodeID];
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_DA * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_DA * (
+                                              sizeof (CH_DEF_STRUCT) + (
+                                                MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES
+                                              )
+                                            )
+                                          )
+                                        ) + (sizeof (TSEFO) * BFEndOfList);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    return FALSE;
+  }
+
+  MemPtr->DieCount = 1;
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_DA * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_DA;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_DA * sizeof (CH_DEF_STRUCT);
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_DA; Channel++) {
+      MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2;
+      MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr;
+      MCTPtr->DctData[Dct].ChData[Channel].Dct = Dct;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+    }
+  }
+
+  //
+  //  Initialize NB block's variables
+  //
+  NBPtr->NBRegTable = (TSEFO *) AllocHeapParams.BufferPtr;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->SPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+  NBPtr->AllNodeSPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+
+  MemRecNInitNBRegTableDA (NBPtr->NBRegTable);
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->VarMtrrHiMsk = MemRecGetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+  LibAmdMemFill (NBPtr->IsSupported, FALSE, sizeof (NBPtr->IsSupported), &NBPtr->MemPtr->StdHeader);
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) MemRecDefTrue;
+  }
+
+  NBPtr->InitRecovery = MemRecNMemInitNb;
+
+  NBPtr->RecModeDefRegArray = RecModeDefRegArrayDA;
+
+  NBPtr->SwitchNodeRec = (VOID (*) (MEM_NB_BLOCK *, UINT8)) MemRecDefRet;
+  NBPtr->SwitchDCT = MemRecNSwitchDctDA;
+  NBPtr->SwitchChannel = MemRecNSwitchChannelDA;
+  NBPtr->SetMaxLatency = MemRecNSetMaxLatencyNb;
+  NBPtr->GetSysAddrRec = MemRecNGetMCTSysAddrNb;
+  NBPtr->SendMrsCmd = MemRecNSendMrsCmdNb;
+  NBPtr->sendZQCmd = MemRecNSendZQCmdNb;
+  NBPtr->SetDramOdtRec = MemRecNSetDramOdtNb;
+
+  NBPtr->GetBitField = MemRecNGetBitFieldNb;
+  NBPtr->SetBitField = MemRecNSetBitFieldNb;
+  NBPtr->GetTrainDly = MemRecNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemRecNSetTrainDlyNb;
+  NBPtr->MemRecNCmnGetSetFieldNb = MemRecNCmnGetSetFieldDA;
+  NBPtr->MemRecNcmnGetSetTrainDlyNb = MemRecNcmnGetSetTrainDlyDA;
+  NBPtr->MemRecNSwitchDctNb = MemRecNSwitchDctDA;
+  NBPtr->TrainingFlow = MemNRecTrainingFlowNb;
+  NBPtr->MemRecNInitializeMctNb = MemRecNInitializeMctDA;
+  NBPtr->MemRecNFinalizeMctNb = MemRecNFinalizeMctDA;
+  NBPtr->IsSupported[DramModeBeforeDimmPres] = TRUE;
+  NBPtr->IsSupported[CheckClearOnDimmMirror] = TRUE;
+  MemRecNSwitchDctDA (NBPtr, 0);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current DCT to work on.
+ *   Should be called before accessing a certain DCT
+ *   All data structures will be updated to point to the current DCT
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Dct - ID of the target DCT
+ *
+ */
+
+VOID
+MemRecNSwitchDctDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  )
+{
+  NBPtr->Dct = Dct & 1;
+  NBPtr->SPDPtr = &(NBPtr->AllNodeSPDPtr[Dct * MAX_DIMMS_PER_CHANNEL]);
+  NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]);
+
+  MemRecNSwitchChannelDA (NBPtr, NBPtr->Channel);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current channel to work on.
+ *   Should be called before accessing a certain channel
+ *   All data structures will be updated to point to the current channel
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Channel - ID of the target channel
+ *
+ */
+
+VOID
+MemRecNSwitchChannelDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  )
+{
+  NBPtr->Channel = Channel & 1;
+  NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[NBPtr->Channel]);
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or set DQS timing during training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  UINT16 Index;
+  UINT16 Offset;
+  UINT32 Value;
+  UINT32 Address;
+  UINT8 Dimm;
+  UINT8 Byte;
+
+  Dimm = DRBN_DIMM (DrbnVar);
+  Byte = DRBN_BYTE (DrbnVar);
+
+  ASSERT (Dimm < 4);
+  ASSERT (Byte <= 8);
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+    Index = 0x10;
+    break;
+  case AccessWrDqsDly:
+    Index = 0x30;
+    break;
+  case AccessWrDatDly:
+    Index = 0x01;
+    break;
+  case AccessRdDqsDly:
+    Index = 0x05;
+    break;
+  case AccessPhRecDly:
+    Index = 0x50;
+    break;
+  default:
+    Index = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+  case AccessWrDqsDly:
+    Index += (Dimm * 3);
+    if (Byte & 0x04) {
+      // if byte 4,5,6,7
+      Index += 0x10;
+    }
+    if (Byte & 0x02) {
+      // if byte 2,3,6,7
+      Index++;
+    }
+    Offset = 16 * (Byte % 2);
+    break;
+
+  case AccessRdDqsDly:
+    Field &= ~ 0x0001;
+  case AccessWrDatDly:
+    Index += (Dimm * 0x100);
+    // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+    // to run AccessPhRecDly sequence.
+  case AccessPhRecDly:
+    Index += (Byte / 4);
+    Offset = 8 * (Byte % 4);
+    break;
+  default:
+    Offset = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  Address = Index;
+  MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+  while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+  Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+
+  if (IsSet) {
+    if (TrnDly == AccessPhRecDly) {
+      Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03];
+    }
+
+    Value = ((UINT32)Field << Offset) | (Value & (~((UINT32)0xFF << Offset)));
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+    Address |= DCT_ACCESS_WRITE;
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+    while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+    if (TrnDly == AccessPhRecDly) {
+      NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value;
+    }
+  } else {
+    Value = (Value >> Offset) & 0xFF;
+  }
+
+  return Value;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *     @param[in]   FieldName - Name of field to be set
+ *     @param[in]   Field - Value to be programmed
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  SBDFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+
+  Value = 0;
+  if (FieldName < BFEndOfList) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = TSEFO_TYPE (Address);
+
+      // If Fn2 and DCT1 selected, set Address to be 1xx
+      if (((Address & 0xF000) == 0x2000) && NBPtr->Dct) {
+        Address |= 0x0100;
+      }
+      if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) {
+        // Special DCT Phy access
+        Address &= 0x0FFFFFFF;
+        Lowbit = 0;
+        Highbit = 16;
+      } else {
+        // Normal DCT Phy access
+        Address = TSEFO_OFFSET (Address);
+      }
+
+
+      if (Type == NB_ACCESS) {
+        Address |= (((UINT32) (24 + 0)) << 15);
+        PciAddr.AddressValue = Address;
+        LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+      } else if (Type == DCT_PHY_ACCESS) {
+        MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+        while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+        Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+      } else {
+        IDS_ERROR_TRAP;
+      }
+
+      if (IsSet) {
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        } else {
+          Mask = (UINT32)0xFFFFFFFF;
+        }
+        Value &= ~(Mask << Lowbit);
+        Value |= (Field & Mask) << Lowbit;
+
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          LibAmdPciWrite (AccessWidth32, PciAddr , &Value, &NBPtr->MemPtr->StdHeader);
+        } else if (Type == DCT_PHY_ACCESS) {
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+        } else {
+          IDS_ERROR_TRAP;
+        }
+      } else {
+        Value = Value >> Lowbit;  // Shift
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes bit field translation table
+ *
+ *     @param[in,out]   *NBRegTable   - Pointer to the NB Table *
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableDA (
+  IN OUT   TSEFO *NBRegTable
+  )
+{
+  UINT16 i;
+  for (i = 0; i <= BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31,  0, BFDevVendorIDReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  2,  0, BFNodeID);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31,  0, BFDramControlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31,  0, BFDramMRSReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  9,  7, BFDramTerm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31,  0, BFDramTimingHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4),  4,  0, BFNbFid);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFLevel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  0,  0, BFInitDram);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  8,  8, BFDdr3Mode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  9,  9, BFLegacyBiosMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  6,  6, BFOdtSwizzle);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15, 8, BFCtrlWordCS);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  8, 8, BFDramEnabled);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 0, BFDctSelBaseAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 0, BFDctSelBaseOffsetReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  6,  2, BFMctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 13, 13, BFPrefIoDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 29, 29, BFFlushWrOnStpGnt);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  1,  1, BFWrtLvTrMode);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp);
+
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemRecNIsIdSupportedDA
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ */
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+
+  if ((LogicalIdPtr->Revision & (AMD_F10_BL_ALL | AMD_F10_DA_ALL)) != 0) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DA/mrnda.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DA/mrnda.h
new file mode 100644
index 0000000000..1ecac2df3c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DA/mrnda.h
@@ -0,0 +1,109 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnda.h
+ *
+ * Northbridge Ridgeback Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MRNDA_H_
+#define _MRNDA_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DCTS_PER_NODE_DA          2
+#define MAX_CHANNELS_PER_DCT_DA       1
+
+#define _4GB_RJ8    ((UINT32)4 << (30 - 8))
+#define MTRR_VALID  11
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemRecConstructNBBlockDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemRecNSwitchDctDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  );
+
+VOID
+MemRecNSwitchChannelDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  );
+
+VOID
+MemRecNFinalizeMctDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemRecNInitializeMctDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MRNDA_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DA/mrnmctda.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DA/mrnmctda.c
new file mode 100644
index 0000000000..b4ff99e906
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DA/mrnmctda.c
@@ -0,0 +1,164 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnmctda.c
+ *
+ * Northbridge DA MCT supporting functions Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mrnda.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_DA_MRNMCTDA_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets final values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNFinalizeMctDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+
+  // Recommended settings for F2x11C
+  MemRecNSetBitFieldNb (NBPtr, BFMctWrLimit, 16);
+  MemRecNSetBitFieldNb (NBPtr, BFPrefCpuDis, 0);
+  MemRecNSetBitFieldNb (NBPtr, BFPrefIoDis, 0);
+  MemRecNSetBitFieldNb (NBPtr, BFFlushWrOnStpGnt, 1);
+
+  LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  if (!NBPtr->ClToNbFlag) {
+    SMsr.lo &= ~((UINT32) 1 << 15);                // ClLinesToNbDis
+  }
+  LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.hi &= ~((UINT32) 1 << (48 - 32));               // WbEnhWsbDis
+  LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets initial values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNInitializeMctDA (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+  LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  if (SMsr.lo & ((UINT32) 1 << 15)) {
+    NBPtr->ClToNbFlag = TRUE;
+  }
+  SMsr.lo |= (UINT32) 1 << 15;                   // ClLinesToNbDis
+  LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.hi |= (UINT32) 1 << (48 - 32);              // WbEnhWsbDis
+  LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DR/mrndr.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DR/mrndr.c
new file mode 100644
index 0000000000..97942b1614
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DR/mrndr.c
@@ -0,0 +1,669 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrndr.c
+ *
+ * Common Northbridge  functions for Ridgeback Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 48317 $ @e \$Date: 2011-03-07 10:38:14 -0700 (Mon, 07 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mrndr.h"
+#include "heapManager.h"
+#include "AdvancedApi.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_DR_MRNDR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define SPLIT_CHANNEL   0x20000000
+#define CHANNEL_SELECT  0x10000000
+#define MAX_DELAYS    9   /* 8 data bytes + 1 ECC byte */
+#define MAX_DIMMS     4   /* 4 DIMMs per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableDR (
+  IN OUT   TSEFO *NBRegTable
+  );
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+STATIC CONST UINT32 RecModeDefRegArrayDR[] = {
+  BFDramControlReg,  0x320C2A06,
+  BFDramBankAddrReg, 0x00001111,
+  BFDramMRSReg,      0x000400A4,
+  BFDramTimingLoReg, 0x000A0092,
+  BFDramTimingHiReg, 0xB6D218FF,
+  BFDramConfigLoReg, 0x00000000,
+  BFDramConfigHiReg, 0x1F48010B,
+  NULL
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]       NodeID   - Node ID for this NB block
+ *
+ *     @return          TRUE  - This node is a RB and this NB block has been initialized
+ *     @return          FALSE - This node is not a RB
+ */
+
+BOOLEAN
+MemRecConstructNBBlockDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 i;
+  UINT8 Dct;
+  UINT8 Channel;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemRecNIsIdSupportedDr (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  MCTPtr = &MemPtr->DiesPerSystem[NodeID];
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_DR * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_DR * (
+                                              sizeof (CH_DEF_STRUCT) + (
+                                                MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES
+                                              )
+                                            )
+                                          )
+                                        ) + (sizeof (TSEFO) * BFEndOfList);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    return FALSE;
+  }
+
+  MemPtr->DieCount = 1;
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_DR;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_DR * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DR; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_DR;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_DR * sizeof (CH_DEF_STRUCT);
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_DR; Channel++) {
+      MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2;
+      MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr;
+      MCTPtr->DctData[Dct].ChData[Channel].Dct = Dct;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+    }
+  }
+
+  //
+  //  Initialize NB block's variables
+  //
+  NBPtr->NBRegTable = (TSEFO *) AllocHeapParams.BufferPtr;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->SPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+  NBPtr->AllNodeSPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+
+  MemRecNInitNBRegTableDR (NBPtr->NBRegTable);
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->VarMtrrHiMsk = MemRecGetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+  LibAmdMemFill (NBPtr->IsSupported, FALSE, sizeof (NBPtr->IsSupported), &NBPtr->MemPtr->StdHeader);
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) MemRecDefTrue;
+  }
+
+  NBPtr->InitRecovery = MemRecNMemInitNb;
+
+  NBPtr->RecModeDefRegArray = RecModeDefRegArrayDR;
+
+  NBPtr->SwitchNodeRec = (VOID (*) (MEM_NB_BLOCK *, UINT8)) MemRecDefRet;
+  NBPtr->SwitchDCT = MemRecNSwitchDctDR;
+  NBPtr->SwitchChannel = MemRecNSwitchChannelDR;
+  NBPtr->SetMaxLatency = MemRecNSetMaxLatencyNb;
+  NBPtr->GetSysAddrRec = MemRecNGetMCTSysAddrNb;
+  NBPtr->SendMrsCmd = MemRecNSendMrsCmdNb;
+  NBPtr->sendZQCmd = MemRecNSendZQCmdNb;
+  NBPtr->SetDramOdtRec = MemRecNSetDramOdtNb;
+
+  NBPtr->GetBitField = MemRecNGetBitFieldNb;
+  NBPtr->SetBitField = MemRecNSetBitFieldNb;
+  NBPtr->GetTrainDly = MemRecNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemRecNSetTrainDlyNb;
+  NBPtr->MemRecNCmnGetSetFieldNb = MemRecNCmnGetSetFieldDR;
+  NBPtr->MemRecNcmnGetSetTrainDlyNb = MemRecNcmnGetSetTrainDlyDR;
+  NBPtr->MemRecNSwitchDctNb = MemRecNSwitchDctDR;
+  NBPtr->TrainingFlow = MemNRecTrainingFlowNb;
+  NBPtr->MemRecNInitializeMctNb = MemRecNInitializeMctDR;
+  NBPtr->MemRecNFinalizeMctNb = MemRecNFinalizeMctDR;
+  NBPtr->IsSupported[DramModeBeforeDimmPres] = TRUE;
+  NBPtr->IsSupported[CheckClearOnDimmMirror] = TRUE;
+  MemRecNSwitchDctDR (NBPtr, 0);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current DCT to work on.
+ *   Should be called before accessing a certain DCT
+ *   All data structures will be updated to point to the current DCT
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Dct - ID of the target DCT
+ *
+ */
+
+VOID
+MemRecNSwitchDctDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  )
+{
+  NBPtr->Dct = Dct & 1;
+  NBPtr->SPDPtr = &(NBPtr->AllNodeSPDPtr[Dct * MAX_DIMMS_PER_CHANNEL]);
+  NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]);
+
+  MemRecNSwitchChannelDR (NBPtr, NBPtr->Channel);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current channel to work on.
+ *   Should be called before accessing a certain channel
+ *   All data structures will be updated to point to the current channel
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Channel - ID of the target channel
+ *
+ */
+
+VOID
+MemRecNSwitchChannelDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  )
+{
+  NBPtr->Channel = Channel & 1;
+  NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[NBPtr->Channel]);
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or set DQS timing during training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  UINT16 Index;
+  UINT16 Offset;
+  UINT32 Value;
+  UINT32 Address;
+  UINT8 Dimm;
+  UINT8 Byte;
+
+  Dimm = DRBN_DIMM (DrbnVar);
+  Byte = DRBN_BYTE (DrbnVar);
+
+  ASSERT (Dimm < 4);
+  ASSERT (Byte <= 8);
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+    Index = 0x10;
+    break;
+  case AccessWrDqsDly:
+    Index = 0x30;
+    break;
+  case AccessWrDatDly:
+    Index = 0x01;
+    break;
+  case AccessRdDqsDly:
+    Index = 0x05;
+    break;
+  case AccessPhRecDly:
+    Index = 0x50;
+    break;
+  default:
+    Index = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+  case AccessWrDqsDly:
+    Index += (Dimm * 3);
+    if (Byte & 0x04) {
+      // if byte 4,5,6,7
+      Index += 0x10;
+    }
+    if (Byte & 0x02) {
+      // if byte 2,3,6,7
+      Index++;
+    }
+    Offset = 16 * (Byte % 2);
+    break;
+
+  case AccessRdDqsDly:
+    Field &= ~ 0x0001;
+  case AccessWrDatDly:
+    Index += (Dimm * 0x100);
+    // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+    // to run AccessPhRecDly sequence.
+  case AccessPhRecDly:
+    Index += (Byte / 4);
+    Offset = 8 * (Byte % 4);
+    break;
+  default:
+    Offset = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  Address = Index;
+  MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+  while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+  Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+
+  if (IsSet) {
+    if (TrnDly == AccessPhRecDly) {
+      Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03];
+    }
+
+    Value = ((UINT32)Field << Offset) | (Value & (~((UINT32)0xFF << Offset)));
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+    Address |= DCT_ACCESS_WRITE;
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+    while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+    if (TrnDly == AccessPhRecDly) {
+      NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value;
+    }
+  } else {
+    Value = (Value >> Offset) & 0xFF;
+  }
+
+  return Value;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *     @param[in]   FieldName - Name of field to be set
+ *     @param[in]   Field - Value to be programmed
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  SBDFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+
+  Value = 0;
+  if (FieldName < BFEndOfList) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = TSEFO_TYPE (Address);
+
+      // If Fn2 and DCT1 selected, set Address to be 1xx
+      if (((Address & 0xF000) == 0x2000) && NBPtr->Dct) {
+        Address |= 0x0100;
+      }
+      if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) {
+        // Special DCT Phy access
+        Address &= 0x0FFFFFFF;
+        Lowbit = 0;
+        Highbit = 16;
+      } else {
+        // Normal DCT Phy access
+        Address = TSEFO_OFFSET (Address);
+      }
+
+
+      if (Type == NB_ACCESS) {
+        Address |= (((UINT32) (24 + 0)) << 15);
+        PciAddr.AddressValue = Address;
+        LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+      } else if (Type == DCT_PHY_ACCESS) {
+        MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+        while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+        Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+      } else {
+        IDS_ERROR_TRAP;
+      }
+
+      if (IsSet) {
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        } else {
+          Mask = (UINT32)0xFFFFFFFF;
+        }
+        Value &= ~(Mask << Lowbit);
+        Value |= (Field & Mask) << Lowbit;
+
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          LibAmdPciWrite (AccessWidth32, PciAddr , &Value, &NBPtr->MemPtr->StdHeader);
+        } else if (Type == DCT_PHY_ACCESS) {
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+        } else {
+          IDS_ERROR_TRAP;
+        }
+      } else {
+        Value = Value >> Lowbit;  // Shift
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes bit field translation table
+ *
+ *     @param[in,out]   *NBRegTable   - Pointer to the NB Table *
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableDR (
+  IN OUT   TSEFO *NBRegTable
+  )
+{
+  UINT16 i;
+  for (i = 0; i <= BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31,  0, BFDevVendorIDReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  2,  0, BFNodeID);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31,  0, BFDramControlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31,  0, BFDramMRSReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  9,  7, BFDramTerm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31,  0, BFDramTimingHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4),  4,  0, BFNbFid);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFLevel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  0,  0, BFInitDram);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  8,  8, BFDdr3Mode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  9,  9, BFLegacyBiosMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  5,  5, BFSubMemclkRegDly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  6,  6, BFOdtSwizzle);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15, 8, BFCtrlWordCS);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  8, 8, BFDramEnabled);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 0, BFDctSelBaseAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 0, BFDctSelBaseOffsetReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  6,  2, BFMctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 13, 13, BFPrefIoDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 29, 29, BFFlushWrOnStpGnt);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  1,  1, BFWrtLvTrMode);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp);
+
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemRecNIsIdSupportedDr
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ */
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedDr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+
+  if ((LogicalIdPtr->Revision & (AMD_F10_RB_ALL
+                               | AMD_F10_BL_ALL
+                               | AMD_F10_DA_ALL )) != 0) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DR/mrndr.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DR/mrndr.h
new file mode 100644
index 0000000000..6e03cb83b7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DR/mrndr.h
@@ -0,0 +1,109 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mndr.h
+ *
+ * Northbridge Ridgeback Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MRNDR_H_
+#define _MRNDR_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DCTS_PER_NODE_DR          2
+#define MAX_CHANNELS_PER_DCT_DR       1
+
+#define _4GB_RJ8    ((UINT32)4 << (30 - 8))
+#define MTRR_VALID  11
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemRecConstructNBBlockDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemRecNSwitchDctDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  );
+
+VOID
+MemRecNSwitchChannelDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  );
+
+VOID
+MemRecNFinalizeMctDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemRecNInitializeMctDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MRNDR_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DR/mrnmctdr.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DR/mrnmctdr.c
new file mode 100644
index 0000000000..fdb787179c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/DR/mrnmctdr.c
@@ -0,0 +1,166 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnmctdr.c
+ *
+ * Northbridge DR MCT supporting functions Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mrndr.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_DR_MRNMCTDR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets final values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNFinalizeMctDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+
+  // Recommended settings for F2x11C
+  MemRecNSetBitFieldNb (NBPtr, BFMctWrLimit, 16);
+  MemRecNSetBitFieldNb (NBPtr, BFPrefCpuDis, 0);
+  MemRecNSetBitFieldNb (NBPtr, BFPrefIoDis, 0);
+  MemRecNSetBitFieldNb (NBPtr, BFFlushWrOnStpGnt, 1);
+
+  LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  if (!NBPtr->ClToNbFlag) {
+    SMsr.lo &= ~((UINT32) 1 << 15);                // ClLinesToNbDis
+  }
+  LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.hi &= ~((UINT32) 1 << (48 - 32));               // WbEnhWsbDis
+  LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets initial values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNInitializeMctDR (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+  LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  if (SMsr.lo & ((UINT32) 1 << 15)) {
+    NBPtr->ClToNbFlag = TRUE;
+  }
+  SMsr.lo |= (UINT32) 1 << 15;                   // ClLinesToNbDis
+  LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.hi |= (UINT32) 1 << (48 - 32);              // WbEnhWsbDis
+  LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrndcthy.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrndcthy.c
new file mode 100644
index 0000000000..11b0839aa6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrndcthy.c
@@ -0,0 +1,75 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrndctHy.c
+ *
+ * Northbridge DCT support for Hydra Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mru.h"
+#include "mrnhy.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_HY_MRNDCTHY_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnhy.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnhy.c
new file mode 100644
index 0000000000..365b7de70a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnhy.c
@@ -0,0 +1,725 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnhy.c
+ *
+ * Common Northbridge  functions for Hydra Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 48317 $ @e \$Date: 2011-03-07 10:38:14 -0700 (Mon, 07 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mm.h"
+#include "mn.h"
+#include "mrnhy.h"
+#include "heapManager.h"
+#include "AdvancedApi.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_RECOVERY_MEM_NB_HY_MRNHY_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DIES_PER_SOCKET     2
+#define MAX_DCTS_PER_DIE 2
+#define SPLIT_CHANNEL   0x20000000
+#define CHANNEL_SELECT  0x10000000
+#define MAX_DELAYS    9   /* 8 data bytes + 1 ECC byte */
+#define MAX_DIMMS     4   /* 4 DIMMs per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableHy (
+  IN OUT   TSEFO *NBRegTable
+  );
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+VOID
+STATIC
+MemRecNSwitchNodeHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 NodeID
+  );
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+STATIC CONST UINT32 RecModeDefRegArrayHy[] = {
+  BFDramControlReg,  0x320C2A06,
+  BFDramBankAddrReg, 0x00001111,
+  BFDramMRSReg,      0x000400A4,
+  BFDramTimingLoReg, 0x000A0092,
+  BFDramTimingHiReg, 0xB6D218FF,
+  BFDramConfigLoReg, 0x00000000,
+  BFDramConfigHiReg, 0x1F48010B,
+  NULL
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]       NodeID   - Node ID for this NB block
+ *
+ *     @return          TRUE  - This node is a Hydra and this NB block has been initialized
+ *     @return          FALSE - This node is not a Hydra
+ */
+
+BOOLEAN
+MemRecConstructNBBlockHY (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 i;
+  UINT8 Dct;
+  UINT8 Channel;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemRecNIsIdSupportedHy (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  MCTPtr = &MemPtr->DiesPerSystem[NodeID];
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_HY * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_HY * (
+                                              sizeof (CH_DEF_STRUCT) + (
+                                                MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES
+                                              )
+                                            )
+                                          )
+                                        ) + (sizeof (TSEFO) * BFEndOfList);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    return FALSE;
+  }
+
+  MemPtr->DieCount = MAX_DIES_PER_SOCKET;
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_HY;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  MemPtr->DiesPerSystem[NodeID + 1].DctCount = MAX_DCTS_PER_NODE_HY;
+  MemPtr->DiesPerSystem[NodeID + 1].DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_HY * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_HY; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_HY;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = (MCTPtr->DieId * 2) + Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_HY * sizeof (CH_DEF_STRUCT);
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_HY; Channel++) {
+      MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2;
+      MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr;
+      MCTPtr->DctData[Dct].ChData[Channel].Dct = Dct;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+    }
+  }
+
+  //
+  //  Initialize NB block's variables
+  //
+  NBPtr->NBRegTable = (TSEFO *) AllocHeapParams.BufferPtr;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->AllNodeMCTPtr = &MemPtr->DiesPerSystem[NodeID];
+  NBPtr->SPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+  NBPtr->AllNodeSPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+
+  MemRecNInitNBRegTableHy (NBPtr->NBRegTable);
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->VarMtrrHiMsk = MemRecGetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+  LibAmdMemFill (NBPtr->IsSupported, FALSE, sizeof (NBPtr->IsSupported), &NBPtr->MemPtr->StdHeader);
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) MemRecDefTrue;
+  }
+
+  NBPtr->InitRecovery = MemRecNMemInitNb;
+
+  NBPtr->RecModeDefRegArray = RecModeDefRegArrayHy;
+
+  NBPtr->SwitchNodeRec = MemRecNSwitchNodeHy;
+  NBPtr->SwitchDCT = MemRecNSwitchDctHy;
+  NBPtr->SwitchChannel = MemRecNSwitchChannelHy;
+  NBPtr->SetMaxLatency = MemRecNSetMaxLatencyNb;
+  NBPtr->GetSysAddrRec = MemRecNGetMCTSysAddrNb;
+  NBPtr->SendMrsCmd = MemRecNSendMrsCmdNb;
+  NBPtr->sendZQCmd = MemRecNSendZQCmdNb;
+  NBPtr->SetDramOdtRec = MemRecNSetDramOdtNb;
+
+  NBPtr->GetBitField = MemRecNGetBitFieldNb;
+  NBPtr->SetBitField = MemRecNSetBitFieldNb;
+  NBPtr->GetTrainDly = MemRecNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemRecNSetTrainDlyNb;
+
+  NBPtr->MemRecNCmnGetSetFieldNb = MemRecNCmnGetSetFieldHy;
+  NBPtr->MemRecNcmnGetSetTrainDlyNb = MemRecNcmnGetSetTrainDlyHy;
+  NBPtr->MemRecNSwitchDctNb = MemRecNSwitchDctHy;
+  NBPtr->TrainingFlow = MemNRecTrainingFlowNb;
+  NBPtr->MemRecNInitializeMctNb = MemRecNInitializeMctHy;
+  NBPtr->MemRecNFinalizeMctNb = MemRecNFinalizeMctHy;
+  NBPtr->IsSupported[DramModeAfterDimmPres] = TRUE;
+  MemRecNSwitchDctHy (NBPtr, 0);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the current die to work on.
+ *   Should be called before accessing a certain die
+ *   All data structures will be updated to point to the current node
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   NodeID - ID of the target die
+ *
+ */
+
+VOID
+STATIC
+MemRecNSwitchNodeHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 NodeID
+  )
+{
+  NBPtr->MCTPtr = &(NBPtr->AllNodeMCTPtr[NodeID]);
+  NBPtr->Node = NodeID;
+  NBPtr->MCTPtr->NodeId = NodeID;
+  MemRecNSwitchDctHy (NBPtr, NBPtr->Dct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current DCT to work on.
+ *   Should be called before accessing a certain DCT
+ *   All data structures will be updated to point to the current DCT
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Dct - ID of the target DCT
+ *
+ */
+
+VOID
+MemRecNSwitchDctHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  )
+{
+  NBPtr->Dct = Dct & 1;
+  NBPtr->SPDPtr = &(NBPtr->AllNodeSPDPtr[(NBPtr->MCTPtr->NodeId * MAX_DCTS_PER_DIE + Dct) * MAX_DIMMS_PER_CHANNEL]);
+  NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]);
+
+  MemRecNSwitchChannelHy (NBPtr, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current channel to work on.
+ *   Should be called before accessing a certain channel
+ *   All data structures will be updated to point to the current channel
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Channel - ID of the target channel
+ *
+ */
+
+VOID
+MemRecNSwitchChannelHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  )
+{
+  NBPtr->Channel = 0;
+  NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[0]);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or set DQS timing during training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  UINT16 index;
+  UINT16 offset;
+  UINT32 value;
+  UINT32 address;
+  UINT8 DIMM;
+  UINT8 Rank;
+  UINT8 Byte;
+  UINT8 Nibble;
+
+  DIMM = DRBN_DIMM (DrbnVar);
+  Rank = DRBN_RANK (DrbnVar);
+  Byte = DRBN_BYTE (DrbnVar);
+  Nibble = DRBN_NBBL (DrbnVar);
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+    index = 0x10;
+    break;
+  case AccessWrDqsDly:
+    index = 0x30;
+    break;
+  case AccessWrDatDly:
+    index = 0x01;
+    break;
+  case AccessRdDqsDly:
+    index = 0x05;
+    break;
+  case AccessPhRecDly:
+    index = 0x50;
+    break;
+  default:
+    index = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+  case AccessWrDqsDly:
+    index += (DIMM * 3);
+    if ((Byte & 0x04) != 0) {
+      // if byte 4,5,6,7
+      index += 0x10;
+    }
+    if ((Byte & 0x02) != 0) {
+      // if byte 2,3,6,7
+      index++;
+    }
+    if (Byte > 7) {
+      index += 2;
+    }
+    offset = 16 * (Byte % 2);
+    index |= (Rank << 8);
+    index |= (Nibble << 9);
+    break;
+
+  case AccessRdDqsDly:
+    Field &= ~ 0x0001;
+  case AccessWrDatDly:
+    index += (DIMM * 0x100);
+    if (Nibble != 0) {
+      if (Rank != 0) {
+        index += 0xA0;
+      } else {
+        index += 0x70;
+      }
+    } else if (Rank != 0) {
+      index += 0x60;
+    }
+    // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+    // to run AccessPhRecDly sequence.
+  case AccessPhRecDly:
+    index += (Byte / 4);
+    offset = 8 * (Byte % 4);
+    break;
+  default:
+    offset = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  address = index;
+  MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, address);
+  while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+  value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+
+  if (IsSet != 0) {
+    if (TrnDly == AccessPhRecDly) {
+      value = NBPtr->DctCachePtr->PhRecReg[index & 0x03];
+    }
+
+    value = ((UINT32)Field << offset) | (value & (~((UINT32)0xFF << offset)));
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, value);
+    address |= DCT_ACCESS_WRITE;
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, address);
+    while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+    if (TrnDly == AccessPhRecDly) {
+      NBPtr->DctCachePtr->PhRecReg[index & 0x03] = value;
+    }
+  } else {
+    value = (value >> offset) & 0xFF;
+  }
+
+  return value;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Name of Field to be set
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  SBDFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+
+  Value = 0;
+  if (FieldName < BFEndOfList) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address != 0) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = TSEFO_TYPE (Address);
+
+      // If Fn2 and DCT1 selected, set Address to be 1xx
+      if (((Address & 0xF000) == 0x2000) && (NBPtr->Dct != 0)) {
+        Address |= 0x0100;
+      }
+      if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) {
+        // Special DCT Phy access
+        Address &= 0x0FFFFFFF;
+        Lowbit = 0;
+        Highbit = 16;
+      } else {
+        // Normal DCT Phy access
+        Address = TSEFO_OFFSET (Address);
+      }
+
+
+      if (Type == NB_ACCESS) {
+        // Address |= (((UINT32) (24 + 0)) << 15);
+        PciAddr.AddressValue = Address;
+        // Fix for MCM
+        PciAddr.Address.Device = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Device;
+        PciAddr.Address.Bus = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Bus;
+        PciAddr.Address.Segment = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Segment;
+        Address = PciAddr.AddressValue;
+        LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+      } else if (Type == DCT_PHY_ACCESS) {
+        MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+        while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+        Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+      } else {
+        IDS_ERROR_TRAP;
+      }
+
+      if (IsSet != 0) {
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        } else {
+          Mask = (UINT32)0xFFFFFFFF;
+        }
+        Value &= ~(Mask << Lowbit);
+        Value |= (Field & Mask) << Lowbit;
+
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          LibAmdPciWrite (AccessWidth32, PciAddr , &Value, &NBPtr->MemPtr->StdHeader);
+        } else if (Type == DCT_PHY_ACCESS) {
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+        } else {
+          IDS_ERROR_TRAP;
+        }
+      } else {
+        Value = Value >> Lowbit;  // Shift
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes bit field translation table
+ *
+*     @param[in,out]   *NBRegTable   - Pointer to the NB Table *
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableHy (
+  IN OUT   TSEFO *NBRegTable
+  )
+{
+  UINT16 i;
+  for (i = 0; i <= BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31,  0, BFDevVendorIDReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  2,  0, BFNodeID);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31,  0, BFDramControlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31,  0, BFDramMRSReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  9,  7, BFDramTerm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31,  0, BFDramTimingHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4),  4,  0, BFNbFid);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFLevel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  0,  0, BFInitDram);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 15, 12, BFX4Dimm);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  8,  8, BFDdr3Mode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  9,  9, BFLegacyBiosMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  5,  5, BFSubMemclkRegDly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  6,  6, BFOdtSwizzle);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15, 8, BFCtrlWordCS);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  8, 8, BFDramEnabled);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 0, BFDctSelBaseAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 0, BFDctSelBaseOffsetReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 31,  0, BFMctCfgHiReg);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  1,  1, BFWrtLvTrMode);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp);
+
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemRecNIsIdSupportedHy
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ *     @return          TRUE -  This node is a Hydra.
+ *     @return          FALSE - This node is not a Hydra.
+ *
+ */
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+  if ((LogicalIdPtr->Revision & AMD_F10_HY_ALL) != 0) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnhy.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnhy.h
new file mode 100644
index 0000000000..b3fcad2732
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnhy.h
@@ -0,0 +1,109 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnhy.h
+ *
+ * Northbridge Hydra Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MRNHY_H_
+#define _MRNHY_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DCTS_PER_NODE_HY          2
+#define MAX_CHANNELS_PER_DCT_HY       1
+
+#define _4GB_RJ8    ((UINT32)4 << (30 - 8))
+#define MTRR_VALID  11
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemRecConstructNBBlockHY (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemRecNSwitchDctHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  );
+
+VOID
+MemRecNSwitchChannelHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  );
+
+VOID
+MemRecNFinalizeMctHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemRecNInitializeMctHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+#endif  /* _MRNHY_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnmcthy.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnmcthy.c
new file mode 100644
index 0000000000..eb9a246ea1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnmcthy.c
@@ -0,0 +1,161 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnmctdr.c
+ *
+ * Northbridge DR MCT supporting functions Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mrnhy.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_HY_MRNMCTHY_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets final values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNFinalizeMctHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+  // Recommended settings for F2x11C
+  MemRecNSetBitFieldNb (NBPtr, BFMctCfgHiReg, 0x2CE00F60);
+
+  LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  if (!NBPtr->ClToNbFlag) {
+    SMsr.lo &= ~((UINT32) 1 << 15);                // ClLinesToNbDis
+  }
+  LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.hi &= ~((UINT32) 1 << (48 - 32));               // WbEnhWsbDis
+  LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets initial values in BUCFG and BUCFG2
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNInitializeMctHy (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  S_UINT64 SMsr;
+
+  MemPtr = NBPtr->MemPtr;
+
+  LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  if (SMsr.lo & ((UINT32) 1 << 15)) {
+    NBPtr->ClToNbFlag = TRUE;
+  }
+  SMsr.lo |= (UINT32) 1 << 15;                   // ClLinesToNbDis
+  LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.hi |= (UINT32) 1 << (48 - 32);              // WbEnhWsbDis
+  LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnprotohy.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnprotohy.c
new file mode 100644
index 0000000000..5773c1fe82
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/HY/mrnprotohy.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnproto.c
+ *
+ * Northbridge support functions for Errata and early samples Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+
+#include "AGESA.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_HY_MRNPROTOHY_FILECODE
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrndctor.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrndctor.c
new file mode 100644
index 0000000000..e12d273c4a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrndctor.c
@@ -0,0 +1,341 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrndctOr.c
+ *
+ * Northbridge DCT support for Orochi Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 49896 $ @e \$Date: 2011-03-30 02:18:18 -0600 (Wed, 30 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mp.h"
+#include "mru.h"
+#include "mrt3.h"
+#include "mrnor.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_OR_MRNDCTOR_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets platform specific config/timing values from the interface layer and
+ *   programs them into DCT.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_ERROR may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_ERROR may have occurred
+ */
+
+BOOLEAN
+MemRecNPlatformSpecOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  CONST UINT32 OdtPattern3D[][4] = {
+    {0x00000000, 0x00000000, 0x00000404, 0x00000000},
+    {0x00000101, 0x00000404, 0x00000105, 0x00000405},
+    {0x00000303, 0x05050606, 0x00000307, 0x0D070607},
+    {0x00000000, 0x00000000, 0x020A0000, 0x080A0000},
+    {0x04040A0A, 0x04040000, 0x040C0A0E, 0x04060000},
+    {0x05050B0B, 0x05050E0E, 0x050D0B0F, 0x05070E0F}
+  };
+
+  UINT32 PhyRODTCSHigh;
+  UINT32 PhyRODTCSLow;
+  UINT32 PhyWODTCSHigh;
+  UINT32 PhyWODTCSLow;
+  UINT8  MaxDimmPerCH;
+  UINT32 ODC;
+  UINT32 AddrCmd;
+  UINT8  i;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  ChannelPtr = NBPtr->ChannelPtr;
+
+  MaxDimmPerCH = RecGetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, 0, ChannelPtr->ChannelID);
+
+  // Set ODC, AddrCmdTmg
+  if (ChannelPtr->Dimms == 1) {
+    ODC = 0x10112222;
+    AddrCmd = 0x003B0000;
+  } else {
+    ODC = 0x10222222;
+    AddrCmd = 0x00390039;
+  }
+  if (ChannelPtr->DimmQrPresent != 0) {
+    ODC = 0x10222222;
+  }
+  MemRecNSetBitFieldNb (NBPtr, BFODCControl, ODC);
+  MemRecNSetBitFieldNb (NBPtr, BFAddrTmgControl, AddrCmd);
+
+  // Find Rtt_Nom, Rtt_Wr
+  if (ChannelPtr->DimmQrPresent == 0) {
+    if (ChannelPtr->Dimms == 1) {
+      NBPtr->PsPtr->DramTerm = 2;
+      NBPtr->PsPtr->DynamicDramTerm = 0;
+    } else {
+      NBPtr->PsPtr->DramTerm = 3;
+      NBPtr->PsPtr->DynamicDramTerm = 2;
+    }
+  } else {
+    NBPtr->PsPtr->DramTerm = 2;
+    NBPtr->PsPtr->DynamicDramTerm = 2;
+  }
+
+  // Set ODT patterns
+  PhyRODTCSLow  = 0x00000000;
+  PhyRODTCSHigh = 0x00000000;
+  PhyWODTCSHigh = 0x00000000;
+  if (MaxDimmPerCH != 3) {
+    if (ChannelPtr->DimmQrPresent == 0) {
+      if (ChannelPtr->Dimms == 1) {
+        PhyWODTCSLow  = 0x08020401;
+      } else {
+        PhyRODTCSLow = 0x01010202;
+        PhyWODTCSLow = 0x09030603;
+      }
+    } else {
+      if (ChannelPtr->Dimms == 1) {
+        PhyWODTCSLow  = 0x080A0505;
+        PhyWODTCSHigh = 0x020A0505;
+      } else {
+        PhyRODTCSHigh = 0x05050A0A;
+        PhyRODTCSLow  = 0x05050A0A;
+        PhyWODTCSHigh = 0x050D0A0E;
+        PhyWODTCSLow  = 0x05070A0E;
+      }
+    }
+  } else {
+    i = ChannelPtr->Dimms + ((ChannelPtr->DimmQrPresent != 0) ? 3 : 0) - 1;
+    PhyWODTCSLow  = OdtPattern3D[i][0];
+    PhyWODTCSHigh = OdtPattern3D[i][1];
+    PhyRODTCSLow  = OdtPattern3D[i][2];
+    PhyRODTCSHigh = OdtPattern3D[i][3];
+  }
+
+  MemRecNSetBitFieldNb (NBPtr, BFPhyWODTCSLow, PhyWODTCSLow);
+  MemRecNSetBitFieldNb (NBPtr, BFPhyRODTCSLow, PhyRODTCSLow);
+  MemRecNSetBitFieldNb (NBPtr, BFPhyRODTCSHigh, PhyRODTCSHigh);
+  MemRecNSetBitFieldNb (NBPtr, BFPhyWODTCSHigh, PhyWODTCSHigh);
+  return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   Set Dram ODT for mission mode and write leveling mode.
+ *
+ *     @param[in,out]   *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       OdtMode    - Mission mode or write leveling mode
+ *     @param[in]       ChipSelect - Chip select number
+ *     @param[in]       TargetCS   - Chip select number that is being trained
+ *
+ */
+
+VOID
+MemRecNSetDramOdtOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       ODT_MODE OdtMode,
+  IN       UINT8 ChipSelect,
+  IN       UINT8 TargetCS
+  )
+{
+  UINT8 DramTerm;
+  UINT8 DramTermDyn;
+
+  // Dram nominal termination & Dram dynamic termination
+  DramTerm = NBPtr->PsPtr->DramTerm;
+  DramTermDyn = NBPtr->PsPtr->DynamicDramTerm;
+
+  if (OdtMode == WRITE_LEVELING_MODE) {
+    if (ChipSelect == TargetCS) {
+      DramTerm = DramTermDyn;
+      MemRecNSetBitFieldNb (NBPtr, BFWrLvOdt, 0xF); // Use MRS commands to disable ODT#
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function initializes the DRAM devices on all DCTs at the same time
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemRecNStartupDCTOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  // Program D18F2x[1,0]9C_x0000_000B = 80000000h.
+  MemRecNSetBitFieldNb (NBPtr, BFDramPhyStatusReg, 0x80000000);
+
+  // Program D18F2x[1,0]9C_x0D0F_E013[PllRegWaitTime] = 0118h.
+  MemRecNSetBitFieldNb (NBPtr, BFPllRegWaitTime, 0x118);
+
+  // Phy Voltage Level Programming
+  MemRecNPhyVoltageLevelNb (NBPtr);
+
+  // Run frequency change sequence
+  MemRecNSetBitFieldNb (NBPtr, BFPllLockTime, 0x190);
+  MemRecNSetBitFieldNb (NBPtr, BFMemClkFreq, 4);
+
+  MemRecNSetBitFieldNb (NBPtr, BFMemClkFreqVal, 1);
+  while (MemRecNGetBitFieldNb (NBPtr, BFFreqChgInProg) == 1) {};
+
+  MemRecNSetBitFieldNb (NBPtr, BFPllLockTime, 0x000F);
+
+  // Run DramInit sequence
+  AGESA_TESTPOINT (TpProcMemDramInit, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->TechPtr->DramInit (NBPtr->TechPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function  sets the maximum round-trip latency in the system from the processor to the DRAM
+ *   devices and back.
+
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     MaxRcvEnDly - Maximum receiver enable delay value
+ *
+ */
+
+VOID
+MemRecNSetMaxLatencyOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly
+  )
+{
+  UINT32 N;
+  UINT32 T;
+  UINT32 P;
+  UINT32 MemClkPeriod;
+  UINT32 NBClkFreq;
+
+  // Find NB frequency
+  NBClkFreq = (200 * (MemRecNGetBitFieldNb (NBPtr, BFNbFid) + 4)) >> MemRecNGetBitFieldNb (NBPtr, BFNbDid);
+
+  // 1. P = N = T = 0.
+  P = N = T = 0;
+
+  // 3. If (D18F2x9C_x0000_0004_dct[1:0][AddrCmdSetup] = 0 & D18F2x9C_x0000_0004_dct[1:0][CsOdt-
+  // Setup] = 0 & D18F2x9C_x0000_0004_dct[1:0][CkeSetup] = 0)
+  // then P = P + 1
+  // else P = P + 2
+  P += 2;
+
+  // 4. P = P + (8 - D18F2x210_dct[1:0]_nbp[3:0][RdPtrInit]) + 1
+  P = P + (8 - 6) + 1;
+
+  // 6. If (D18F2xA8_dct[1:0][SubMemclkRegDly] = 0 & D18F2x90_dct[1:0][UnbuffDimm] = 0)
+  // then P = P + 2
+  P += 2;
+
+  // 7. P = P + (2 * (D18F2x200_dct[1:0][Tcl] - 1 clocks))
+  P = P + (2 * (6 - 1));
+
+  // 5. P = P + 5
+  P += 5;
+
+  // 8. P = P + CEIL(MAX(D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] +
+  //    D18F2x9C_x0000_0[3:0]0[7:5]_dct[1:0][RdDqsTime] PCLKs))
+  P = P + (MaxRcvEnDly / 32) + 2;
+
+  // 9. P = P + 5
+  P += 5;
+
+  // 10. T = T + 800 ps
+  T += 800;
+
+  // 11. N = (P/(MemClkFreq * 2) + T) * NclkFreq; Convert from PCLKs plus time to NCLKs.
+  MemClkPeriod = 1000000 / DDR667_FREQUENCY;
+  N = ((((P * MemClkPeriod + 1) / 2) + T) * NBClkFreq + 999999) / 1000000;
+
+  // 12. N = N - 1. See step 9.
+  N = N - 1;
+
+  // 13. D18F2x210_dct[1:0]_nbp[3:0][MaxRdLatency] = CEIL(N) - 1
+  N = N - 1;
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "NB Freq: %d MHz\n", NBClkFreq);
+  IDS_HDT_CONSOLE (MEM_FLOW, "MaxRdLat: %03x\n", N);
+  MemRecNSetBitFieldNb (NBPtr, BFMaxLatency, N);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnmctor.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnmctor.c
new file mode 100644
index 0000000000..fc09d176fb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnmctor.c
@@ -0,0 +1,145 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnmctor.c
+ *
+ * Northbridge OR MCT supporting functions Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 48317 $ @e \$Date: 2011-03-07 10:38:14 -0700 (Mon, 07 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mrnor.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_OR_MRNMCTOR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function is the Recovery memory configuration function for OR DDR3
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+
+AGESA_STATUS
+MemRecNMemInitOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  AGESA_STATUS Status;
+  MEM_TECH_BLOCK *TechPtr;
+
+  TechPtr = NBPtr->TechPtr;
+
+  Status = AGESA_FATAL;
+  if (TechPtr->DimmPresence (TechPtr)) {
+
+    if (MemRecNAutoConfigNb (NBPtr)) {
+
+      AGESA_TESTPOINT (TpProcMemPlatformSpecificConfig, &(NBPtr->MemPtr->StdHeader));
+      if (MemRecNPlatformSpecOr (NBPtr)) {
+        AgesaHookBeforeDramInitRecovery (0, NBPtr->MemPtr);
+        AGESA_TESTPOINT (TpProcMemStartDcts, &(NBPtr->MemPtr->StdHeader));
+        MemRecNStartupDCTOr (NBPtr);
+
+        AGESA_TESTPOINT (TpProcMemMtrrConfiguration, &(NBPtr->MemPtr->StdHeader));
+        MemRecNCPUMemRecTypingNb (NBPtr);
+
+        AGESA_TESTPOINT (TpProcMemDramTraining, &(NBPtr->MemPtr->StdHeader));
+        NBPtr->TrainingFlow (NBPtr);
+
+        Status = AGESA_SUCCESS;
+      }
+    }
+  }
+
+  return Status;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnor.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnor.c
new file mode 100644
index 0000000000..8fcfc96932
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnor.c
@@ -0,0 +1,798 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnor.c
+ *
+ * Common Northbridge  functions for Orochi Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 49896 $ @e \$Date: 2011-03-30 02:18:18 -0600 (Wed, 30 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mm.h"
+#include "mn.h"
+#include "mrnor.h"
+#include "heapManager.h"
+#include "AdvancedApi.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+#define FILECODE PROC_RECOVERY_MEM_NB_OR_MRNOR_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define MAX_DCTS_PER_DIE 2
+#define SPLIT_CHANNEL   0x20000000
+#define CHANNEL_SELECT  0x10000000
+#define MAX_DELAYS    9   /* 8 data bytes + 1 ECC byte */
+#define MAX_DIMMS     4   /* 4 DIMMs per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableOr (
+  IN OUT   TSEFO *NBRegTable
+  );
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+VOID
+STATIC
+MemRecNSwitchNodeOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 NodeID
+  );
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+STATIC CONST UINT32 RecModeDefRegArrayOR[] = {
+  BFDramBankAddrReg, 0x00001111,
+  BFTref,            0x00000002,
+  BFDramTimingLoReg, 0x00000000,
+  BFDramTiming0,     0x0F060606,
+  BFDramTiming1,     0x04100415,
+  BFDramTiming2,     0x05050505,
+  BFDramTiming3,     0x00000405,
+  BFDramTiming4,     0x000B0B0B,
+  BFDramTiming5,     0x0B0B0B0B,
+  BFDramTiming6,     0x00171600,
+  BFDramTiming10,    0x00000006,
+  BFDramNBP0,        0x32000006,
+  BFDramConfigHiReg, 0x00180800,
+  BFDramODTCtlReg,   0x00006061,
+  BFPhyFence,        0x000056B5,
+  BFSwNbPstateLoDis, 0x00000001,
+  NULL
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]       NodeID   - Node ID for this NB block
+ *
+ *     @return          TRUE  - This node is a Orochi and this NB block has been initialized
+ *     @return          FALSE - This node is not a Orochi
+ */
+
+BOOLEAN
+MemRecConstructNBBlockOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 i;
+  UINT8 Dct;
+  UINT8 Channel;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemRecNIsIdSupportedOr (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  MCTPtr = &MemPtr->DiesPerSystem[NodeID];
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_OR * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_OR * (
+                                              sizeof (CH_DEF_STRUCT) + (
+                                                MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES
+                                              )
+                                            )
+                                          )
+                                        ) + sizeof (MEM_PS_BLOCK) + (sizeof (TSEFO) * BFEndOfList);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    return FALSE;
+  }
+
+  MemPtr->DieCount = MAX_DIES_PER_SOCKET_OR;
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_OR;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  MemPtr->DiesPerSystem[NodeID + 1].DctCount = MAX_DCTS_PER_NODE_OR;
+  MemPtr->DiesPerSystem[NodeID + 1].DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_OR * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_OR; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_OR;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = (MCTPtr->DieId * 2) + Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_OR * sizeof (CH_DEF_STRUCT);
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_OR; Channel++) {
+      MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2;
+      MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr;
+      MCTPtr->DctData[Dct].ChData[Channel].Dct = Dct;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+    }
+  }
+  NBPtr->PsPtr = (MEM_PS_BLOCK *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += sizeof (MEM_PS_BLOCK);
+
+  //
+  //  Initialize NB block's variables
+  //
+  NBPtr->NBRegTable = (TSEFO *) AllocHeapParams.BufferPtr;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->AllNodeMCTPtr = &MemPtr->DiesPerSystem[NodeID];
+  NBPtr->SPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+  NBPtr->AllNodeSPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+
+  MemRecNInitNBRegTableOr (NBPtr->NBRegTable);
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->VarMtrrHiMsk = MemRecGetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+  LibAmdMemFill (NBPtr->IsSupported, FALSE, sizeof (NBPtr->IsSupported), &NBPtr->MemPtr->StdHeader);
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) MemRecDefTrue;
+  }
+
+  NBPtr->InitRecovery = MemRecNMemInitOr;
+
+  NBPtr->RecModeDefRegArray = RecModeDefRegArrayOR;
+
+  NBPtr->SwitchNodeRec = MemRecNSwitchNodeOr;
+  NBPtr->SwitchDCT = MemRecNSwitchDctOr;
+  NBPtr->SwitchChannel = MemRecNSwitchChannelOr;
+  NBPtr->SetMaxLatency = MemRecNSetMaxLatencyOr;
+  NBPtr->GetSysAddrRec = MemRecNGetMCTSysAddrNb;
+  NBPtr->SendMrsCmd = MemRecNSendMrsCmdNb;
+  NBPtr->sendZQCmd = MemRecNSendZQCmdNb;
+  NBPtr->SetDramOdtRec = MemRecNSetDramOdtOr;
+
+  NBPtr->GetBitField = MemRecNGetBitFieldNb;
+  NBPtr->SetBitField = MemRecNSetBitFieldNb;
+  NBPtr->GetTrainDly = MemRecNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemRecNSetTrainDlyNb;
+
+  NBPtr->MemRecNCmnGetSetFieldNb = MemRecNCmnGetSetFieldOr;
+  NBPtr->MemRecNcmnGetSetTrainDlyNb = MemRecNcmnGetSetTrainDlyOr;
+  NBPtr->MemRecNSwitchDctNb = MemRecNSwitchDctOr;
+  NBPtr->TrainingFlow = MemNRecTrainingFlowUnb;
+  NBPtr->ReadPattern = MemRecNContReadPatternUnb;
+  NBPtr->WritePattern = MemRecNContWritePatternUnb;
+  NBPtr->CompareTestPattern = MemRecNCompareTestPatternUnb;
+
+  NBPtr->IsSupported[CheckDramTerm] = TRUE;
+  NBPtr->IsSupported[CheckDramTermDyn] = TRUE;
+  MemRecNSwitchDctOr (NBPtr, 0);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function sets the current die to work on.
+ *   Should be called before accessing a certain die
+ *   All data structures will be updated to point to the current node
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   NodeID - ID of the target die
+ *
+ */
+
+VOID
+STATIC
+MemRecNSwitchNodeOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 NodeID
+  )
+{
+  NBPtr->MCTPtr = &(NBPtr->AllNodeMCTPtr[NodeID]);
+  NBPtr->Node = NodeID;
+  NBPtr->MCTPtr->NodeId = NodeID;
+  MemRecNSwitchDctOr (NBPtr, NBPtr->Dct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current DCT to work on.
+ *   Should be called before accessing a certain DCT
+ *   All data structures will be updated to point to the current DCT
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Dct - ID of the target DCT
+ *
+ */
+
+VOID
+MemRecNSwitchDctOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  )
+{
+  NBPtr->Dct = Dct & 1;
+  NBPtr->SPDPtr = &(NBPtr->AllNodeSPDPtr[(NBPtr->MCTPtr->NodeId * MAX_DCTS_PER_DIE + Dct) * MAX_DIMMS_PER_CHANNEL]);
+  NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]);
+
+  MemRecNSwitchChannelOr (NBPtr, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current channel to work on.
+ *   Should be called before accessing a certain channel
+ *   All data structures will be updated to point to the current channel
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Channel - ID of the target channel
+ *
+ */
+
+VOID
+MemRecNSwitchChannelOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  )
+{
+  NBPtr->Channel = 0;
+  NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[0]);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or set DQS timing during training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  UINT16 index;
+  UINT16 offset;
+  UINT32 value;
+  UINT32 address;
+  UINT8 DIMM;
+  UINT8 Byte;
+  UINT32 mask;
+
+  DIMM = DRBN_DIMM (DrbnVar);
+  Byte = DRBN_BYTE (DrbnVar);
+
+  mask = 0xFF;
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+    mask = 0x1FF;
+    index = 0x10;
+    break;
+  case AccessWrDqsDly:
+    index = 0x30;
+    break;
+  case AccessWrDatDly:
+    index = 0x01;
+    break;
+  case AccessRdDqsDly:
+    index = 0x05;
+    break;
+  case AccessPhRecDly:
+    index = 0x50;
+    break;
+  default:
+    index = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+  case AccessWrDqsDly:
+    index += (DIMM * 3);
+    if ((Byte & 0x04) != 0) {
+      // if byte 4,5,6,7
+      index += 0x10;
+    }
+    if ((Byte & 0x02) != 0) {
+      // if byte 2,3,6,7
+      index++;
+    }
+    offset = 16 * (Byte % 2);
+    break;
+
+  case AccessRdDqsDly:
+  case AccessWrDatDly:
+    index += (DIMM * 0x100);
+    // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+    // to run AccessPhRecDly sequence.
+  case AccessPhRecDly:
+    index += (Byte / 4);
+    offset = 8 * (Byte % 4);
+    break;
+  default:
+    offset = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  address = index;
+  MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, address);
+  while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+  value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+
+  if (IsSet != 0) {
+    if (TrnDly == AccessPhRecDly) {
+      value = NBPtr->DctCachePtr->PhRecReg[index & 0x03];
+    }
+
+    value = ((UINT32)Field << offset) | (value & (~(mask << offset)));
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, value);
+    address |= DCT_ACCESS_WRITE;
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, address);
+    while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+    if (TrnDly == AccessPhRecDly) {
+      NBPtr->DctCachePtr->PhRecReg[index & 0x03] = value;
+    }
+  } else {
+    value = (value >> offset) & mask;
+  }
+
+  return value;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Name of Field to be set
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  TSEFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+
+  Value = 0;
+  if (FieldName < BFEndOfList) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address != 0) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = TSEFO_TYPE (Address);
+
+      // If Fn2 and DCT1 selected, set Address to be 1xx
+      if ((Type == NB_ACCESS) && ((Address & 0xF000) == 0x2000)) {
+        MemRecNSetBitFieldNb (NBPtr, BFDctCfgSel, NBPtr->Dct);
+      }
+      if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) {
+        // Special DCT Phy access
+        Address &= 0x0FFFFFFF;
+        Lowbit = 0;
+        Highbit = 16;
+      } else {
+        // Normal DCT Phy access
+        Address = TSEFO_OFFSET (Address);
+      }
+
+
+      if (Type == NB_ACCESS) {
+        // Address |= (((UINT32) (24 + 0)) << 15);
+        PciAddr.AddressValue = Address;
+        // Fix for MCM
+        PciAddr.Address.Device = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Device;
+        PciAddr.Address.Bus = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Bus;
+        PciAddr.Address.Segment = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Segment;
+        Address = PciAddr.AddressValue;
+        LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+        IDS_HDT_CONSOLE (MEM_GETREG, "~Dev%x Dct%d Fn%d_%03x = %x\n",
+                         NBPtr->PciAddr.Address.Device, NBPtr->Dct,
+                         (Address >> 12) & 0xF, Address & 0xFFF, Value);
+      } else if (Type == DCT_PHY_ACCESS) {
+        MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+        while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+        Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+      } else {
+        IDS_ERROR_TRAP;
+      }
+
+      if (IsSet != 0) {
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        } else {
+          Mask = (UINT32)0xFFFFFFFF;
+        }
+        Value &= ~(Mask << Lowbit);
+        Value |= (Field & Mask) << Lowbit;
+
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          LibAmdPciWrite (AccessWidth32, PciAddr , &Value, &NBPtr->MemPtr->StdHeader);
+          IDS_HDT_CONSOLE (MEM_SETREG, "~Dev%x Dct%d Fn%d_%03x [%d:%d] = %x\n",
+                           NBPtr->PciAddr.Address.Device, NBPtr->Dct,
+                           (Address >> 12) & 0xF, Address & 0xFFF, Highbit, Lowbit, Field);
+        } else if (Type == DCT_PHY_ACCESS) {
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+        } else {
+          IDS_ERROR_TRAP;
+        }
+      } else {
+        Value = Value >> Lowbit;  // Shift
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes bit field translation table
+ *
+*     @param[in,out]   *NBRegTable   - Pointer to the NB Table *
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableOr (
+  IN OUT   TSEFO *NBRegTable
+  )
+{
+  UINT16 i;
+  for (i = 0; i <= BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31,  0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31,  0, BFDramLimitReg0);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x10C), 0,  0, BFDctCfgSel);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 17,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 20, 18, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 23, 21, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFLevel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 17, 16, BFTref);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 15, 12, BFX4Dimm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  4,  0, BFMemClkFreq);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  7,  7, BFMemClkFreqVal);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 21, 21, BFFreqChgInProg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  5,  5, BFSubMemclkRegDly);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15,  8, BFCtrlWordCS);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 0, BFDctSelBaseAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 0, BFDctSelBaseOffsetReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x200), 31,  0, BFDramTiming0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x204), 31,  0, BFDramTiming1);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x208), 31,  0, BFDramTiming2);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x20C), 31,  0, BFDramTiming3);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x210), 31,  0, BFDramNBP0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x210), 31, 22, BFMaxLatency);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x214), 31,  0, BFDramTiming4);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x218), 31,  0, BFDramTiming5);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x21C), 31,  0, BFDramTiming6);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x22C), 31,  0, BFDramTiming10);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x230), 31,  0, BFPhyRODTCSLow);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x234), 31,  0, BFPhyRODTCSHigh);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x238), 31,  0, BFPhyWODTCSLow);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x23C), 31,  0, BFPhyWODTCSHigh);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x240), 31,  0, BFDramODTCtlReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250),  3,  2, BFCmdTestEnable);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250),  7,  5, BFCmdType);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 10, 10, BFTestStatus);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 11, 11, BFSendCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 12, 12, BFCmdSendInProg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x254), 26, 24, BFTgtChipSelectA );
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x260), 20,  0, BFCmdCount);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x268), 17,  0, BFNibbleErrSts);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x270), 18,  0, BFDataPrbsSeed);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 31,  0, BFDramCmd2Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x160),  5,  1, BFNbFid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x160),  7,  7, BFNbDid);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170), 14, 14, BFSwNbPstateLoDis);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  1,  1, BFWrtLvTrMode);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 13, 13, BFDqsRcvTrEn);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0B, 31,  0, BFDramPhyStatusReg);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0C, 31, 16, BFPhyFence);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0FE013, _NOT_USED_, _NOT_USED_, BFPllRegWaitTime);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0FE006, _NOT_USED_, _NOT_USED_, BFPllLockTime);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F0F1F, _NOT_USED_, _NOT_USED_, BFDataRxVioLvl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F2F1F, _NOT_USED_, _NOT_USED_, BFClkRxVioLvl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F4009, _NOT_USED_, _NOT_USED_, BFCmpVioLvl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F8F1F, _NOT_USED_, _NOT_USED_, BFCmdRxVioLvl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0FC01F, _NOT_USED_, _NOT_USED_, BFAddrRxVioLvl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0F0F30, _NOT_USED_, _NOT_USED_, BFBlockRxDqsLock);
+//DMACH
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS,  0x0D0FE003, _NOT_USED_, _NOT_USED_, BFDisablePredriverCal);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00,  2,  0, BFCkeDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00,  6,  4, BFCsOdtDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 10,  8, BFAddrCmdDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 14, 12, BFClkDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 18, 16, BFDataDrvStren);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 22, 20, BFDqsDrvStren);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D08E003, _NOT_USED_, _NOT_USED_, BFDisablePredriverCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F0F02, _NOT_USED_, _NOT_USED_, BFDataByteTxPreDriverCal);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F0F06, _NOT_USED_, _NOT_USED_, BFDataByteTxPreDriverCal2Pad1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F0F0A, _NOT_USED_, _NOT_USED_, BFDataByteTxPreDriverCal2Pad2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F8006, _NOT_USED_, _NOT_USED_, BFCmdAddr0TxPreDriverCal2Pad1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F800A, _NOT_USED_, _NOT_USED_, BFCmdAddr0TxPreDriverCal2Pad2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F8106, _NOT_USED_, _NOT_USED_, BFCmdAddr1TxPreDriverCal2Pad1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F810A, _NOT_USED_, _NOT_USED_, BFCmdAddr1TxPreDriverCal2Pad2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0FC006, _NOT_USED_, _NOT_USED_, BFAddrTxPreDriverCal2Pad1);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0FC00A, _NOT_USED_, _NOT_USED_, BFAddrTxPreDriverCal2Pad2);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0FC00E, _NOT_USED_, _NOT_USED_, BFAddrTxPreDriverCal2Pad3);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0FC012, _NOT_USED_, _NOT_USED_, BFAddrTxPreDriverCal2Pad4);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F8002, _NOT_USED_, _NOT_USED_, BFCmdAddr0TxPreDriverCalPad0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F8102, _NOT_USED_, _NOT_USED_, BFCmdAddr1TxPreDriverCalPad0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0FC002, _NOT_USED_, _NOT_USED_, BFAddrTxPreDriverCalPad0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F2002, _NOT_USED_, _NOT_USED_, BFClock0TxPreDriverCalPad0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F2102, _NOT_USED_, _NOT_USED_, BFClock1TxPreDriverCalPad0);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D0F2202, _NOT_USED_, _NOT_USED_, BFClock2TxPreDriverCalPad0);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemRecNIsIdSupportedOr
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ *     @return          TRUE -  This node is a Orochi.
+ *     @return          FALSE - This node is not a Orochi.
+ *
+ */
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+  if (((LogicalIdPtr->Family & AMD_FAMILY_15_OR) != 0)
+      && ((LogicalIdPtr->Revision & AMD_F15_ALL) != 0)) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnor.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnor.h
new file mode 100644
index 0000000000..6fbf8a637c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnor.h
@@ -0,0 +1,129 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnor.h
+ *
+ * Northbridge Orochi Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 49947 $ @e \$Date: 2011-03-30 17:32:05 -0600 (Wed, 30 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MRNOR_H_
+#define _MRNOR_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DIES_PER_SOCKET_OR        2
+#define MAX_DCTS_PER_NODE_OR          2
+#define MAX_CHANNELS_PER_DCT_OR       1
+
+#define _4GB_RJ8    ((UINT32)4 << (30 - 8))
+#define MTRR_VALID  11
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemRecConstructNBBlockOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemRecNSwitchDctOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  );
+
+VOID
+MemRecNSwitchChannelOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  );
+
+VOID
+MemRecNSetDramOdtOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       ODT_MODE OdtMode,
+  IN       UINT8 ChipSelect,
+  IN       UINT8 TargetCS
+  );
+
+AGESA_STATUS
+MemRecNMemInitOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+BOOLEAN
+MemRecNPlatformSpecOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemRecNStartupDCTOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+MemRecNSetMaxLatencyOr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly
+  );
+
+#endif  /* _MRNOR_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnprotoor.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnprotoor.c
new file mode 100644
index 0000000000..b06c17d300
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/OR/mrnprotoor.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnproto.c
+ *
+ * Northbridge support functions for Errata and early samples Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+
+#include "AGESA.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_OR_MRNPROTOOR_FILECODE
+/*
+ *-----------------------------------------------------------------------------
+ *                                EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/PH/mrnPh.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/PH/mrnPh.c
new file mode 100644
index 0000000000..724469b04e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/PH/mrnPh.c
@@ -0,0 +1,666 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnPh.c
+ *
+ * Common Northbridge  functions for Pharaoh Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 48317 $ @e \$Date: 2011-03-07 10:38:14 -0700 (Mon, 07 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mrnda.h"
+#include "mrnPh.h"
+#include "heapManager.h"
+#include "AdvancedApi.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_PH_MRNPH_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define SPLIT_CHANNEL   0x20000000
+#define CHANNEL_SELECT  0x10000000
+#define MAX_DELAYS    9   /* 8 data bytes + 1 ECC byte */
+#define MAX_DIMMS     4   /* 4 DIMMs per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTablePh (
+  IN OUT   TSEFO *NBRegTable
+  );
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+STATIC CONST UINT32 RecModeDefRegArrayPh[] = {
+  BFDramControlReg,  0x320C2A06,
+  BFDramBankAddrReg, 0x00001111,
+  BFDramMRSReg,      0x000400A4,
+  BFDramTimingLoReg, 0x000A0092,
+  BFDramTimingHiReg, 0xB6D218FF,
+  BFDramConfigLoReg, 0x00000000,
+  BFDramConfigHiReg, 0x1F48010B,
+  NULL
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]       NodeID   - Node ID for this NB block
+ *
+ *     @return          TRUE  - This node is a RB and this NB block has been initialized
+ *     @return          FALSE - This node is not a RB
+ */
+
+BOOLEAN
+MemRecConstructNBBlockPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 i;
+  UINT8 Dct;
+  UINT8 Channel;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemRecNIsIdSupportedPh (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  MCTPtr = &MemPtr->DiesPerSystem[NodeID];
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_DA * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_DA * (
+                                              sizeof (CH_DEF_STRUCT) + (
+                                                MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES
+                                              )
+                                            )
+                                          )
+                                        ) + (sizeof (TSEFO) * BFEndOfList);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    return FALSE;
+  }
+
+  MemPtr->DieCount = 1;
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_DA * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_DA;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_DA * sizeof (CH_DEF_STRUCT);
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_DA; Channel++) {
+      MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2;
+      MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr;
+      MCTPtr->DctData[Dct].ChData[Channel].Dct = Dct;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+    }
+  }
+
+  //
+  //  Initialize NB block's variables
+  //
+  NBPtr->NBRegTable = (TSEFO *) AllocHeapParams.BufferPtr;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->SPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+  NBPtr->AllNodeSPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+
+  MemRecNInitNBRegTablePh (NBPtr->NBRegTable);
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->VarMtrrHiMsk = MemRecGetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+  LibAmdMemFill (NBPtr->IsSupported, FALSE, sizeof (NBPtr->IsSupported), &NBPtr->MemPtr->StdHeader);
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) MemRecDefTrue;
+  }
+
+  NBPtr->InitRecovery = MemRecNMemInitNb;
+
+  NBPtr->RecModeDefRegArray = RecModeDefRegArrayPh;
+
+  NBPtr->SwitchNodeRec = (VOID (*) (MEM_NB_BLOCK *, UINT8)) MemRecDefRet;
+  NBPtr->SwitchDCT = MemRecNSwitchDctPh;
+  NBPtr->SwitchChannel = MemRecNSwitchChannelPh;
+  NBPtr->SetMaxLatency = MemRecNSetMaxLatencyNb;
+  NBPtr->GetSysAddrRec = MemRecNGetMCTSysAddrNb;
+  NBPtr->SendMrsCmd = MemRecNSendMrsCmdNb;
+  NBPtr->sendZQCmd = MemRecNSendZQCmdNb;
+  NBPtr->SetDramOdtRec = MemRecNSetDramOdtNb;
+
+  NBPtr->GetBitField = MemRecNGetBitFieldNb;
+  NBPtr->SetBitField = MemRecNSetBitFieldNb;
+  NBPtr->GetTrainDly = MemRecNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemRecNSetTrainDlyNb;
+  NBPtr->MemRecNCmnGetSetFieldNb = MemRecNCmnGetSetFieldPh;
+  NBPtr->MemRecNcmnGetSetTrainDlyNb = MemRecNcmnGetSetTrainDlyPh;
+  NBPtr->MemRecNSwitchDctNb = MemRecNSwitchDctPh;
+  NBPtr->TrainingFlow = MemNRecTrainingFlowNb;
+  NBPtr->MemRecNInitializeMctNb = MemRecNInitializeMctDA;
+  NBPtr->MemRecNFinalizeMctNb = MemRecNFinalizeMctDA;
+  NBPtr->IsSupported[DramModeBeforeDimmPres] = TRUE;
+  NBPtr->IsSupported[CheckClearOnDimmMirror] = TRUE;
+  MemRecNSwitchDctPh (NBPtr, 0);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current DCT to work on.
+ *   Should be called before accessing a certain DCT
+ *   All data structures will be updated to point to the current DCT
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Dct - ID of the target DCT
+ *
+ */
+
+VOID
+MemRecNSwitchDctPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  )
+{
+  NBPtr->Dct = Dct & 1;
+  NBPtr->SPDPtr = &(NBPtr->AllNodeSPDPtr[Dct * MAX_DIMMS_PER_CHANNEL]);
+  NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]);
+
+  MemRecNSwitchChannelPh (NBPtr, NBPtr->Channel);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current channel to work on.
+ *   Should be called before accessing a certain channel
+ *   All data structures will be updated to point to the current channel
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Channel - ID of the target channel
+ *
+ */
+
+VOID
+MemRecNSwitchChannelPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  )
+{
+  NBPtr->Channel = Channel & 1;
+  NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[NBPtr->Channel]);
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or set DQS timing during training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  UINT16 Index;
+  UINT16 Offset;
+  UINT32 Value;
+  UINT32 Address;
+  UINT8 Dimm;
+  UINT8 Byte;
+
+  Dimm = DRBN_DIMM (DrbnVar);
+  Byte = DRBN_BYTE (DrbnVar);
+
+  ASSERT (Dimm < 4);
+  ASSERT (Byte <= 8);
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+    Index = 0x10;
+    break;
+  case AccessWrDqsDly:
+    Index = 0x30;
+    break;
+  case AccessWrDatDly:
+    Index = 0x01;
+    break;
+  case AccessRdDqsDly:
+    Index = 0x05;
+    break;
+  case AccessPhRecDly:
+    Index = 0x50;
+    break;
+  default:
+    Index = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+  case AccessWrDqsDly:
+    Index += (Dimm * 3);
+    if (Byte & 0x04) {
+      // if byte 4,5,6,7
+      Index += 0x10;
+    }
+    if (Byte & 0x02) {
+      // if byte 2,3,6,7
+      Index++;
+    }
+    Offset = 16 * (Byte % 2);
+    break;
+
+  case AccessRdDqsDly:
+    Field &= ~ 0x0001;
+  case AccessWrDatDly:
+    Index += (Dimm * 0x100);
+    // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+    // to run AccessPhRecDly sequence.
+  case AccessPhRecDly:
+    Index += (Byte / 4);
+    Offset = 8 * (Byte % 4);
+    break;
+  default:
+    Offset = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  Address = Index;
+  MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+  while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+  Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+
+  if (IsSet) {
+    if (TrnDly == AccessPhRecDly) {
+      Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03];
+    }
+
+    Value = ((UINT32)Field << Offset) | (Value & (~((UINT32)0xFF << Offset)));
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+    Address |= DCT_ACCESS_WRITE;
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+    while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+    if (TrnDly == AccessPhRecDly) {
+      NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value;
+    }
+  } else {
+    Value = (Value >> Offset) & 0xFF;
+  }
+
+  return Value;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *     @param[in]   FieldName - Name of field to be set
+ *     @param[in]   Field - Value to be programmed
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  SBDFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+
+  Value = 0;
+  if (FieldName < BFEndOfList) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = TSEFO_TYPE (Address);
+
+      // If Fn2 and DCT1 selected, set Address to be 1xx
+      if (((Address & 0xF000) == 0x2000) && NBPtr->Dct) {
+        Address |= 0x0100;
+      }
+      if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) {
+        // Special DCT Phy access
+        Address &= 0x0FFFFFFF;
+        Lowbit = 0;
+        Highbit = 16;
+      } else {
+        // Normal DCT Phy access
+        Address = TSEFO_OFFSET (Address);
+      }
+
+
+      if (Type == NB_ACCESS) {
+        Address |= (((UINT32) (24 + 0)) << 15);
+        PciAddr.AddressValue = Address;
+        LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+      } else if (Type == DCT_PHY_ACCESS) {
+        MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+        while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+        Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+      } else {
+        IDS_ERROR_TRAP;
+      }
+
+      if (IsSet) {
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        } else {
+          Mask = (UINT32)0xFFFFFFFF;
+        }
+        Value &= ~(Mask << Lowbit);
+        Value |= (Field & Mask) << Lowbit;
+
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          LibAmdPciWrite (AccessWidth32, PciAddr , &Value, &NBPtr->MemPtr->StdHeader);
+        } else if (Type == DCT_PHY_ACCESS) {
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+        } else {
+          IDS_ERROR_TRAP;
+        }
+      } else {
+        Value = Value >> Lowbit;  // Shift
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes bit field translation table
+ *
+ *     @param[in,out]   *NBRegTable   - Pointer to the NB Table *
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTablePh (
+  IN OUT   TSEFO *NBRegTable
+  )
+{
+  UINT16 i;
+  for (i = 0; i <= BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31,  0, BFDevVendorIDReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  2,  0, BFNodeID);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31,  0, BFDramControlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31,  0, BFDramMRSReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  9,  7, BFDramTerm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31,  0, BFDramTimingHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4),  4,  0, BFNbFid);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFLevel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  0,  0, BFInitDram);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  8,  8, BFDdr3Mode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  9,  9, BFLegacyBiosMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  6,  6, BFOdtSwizzle);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15, 8, BFCtrlWordCS);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  8, 8, BFDramEnabled);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 0, BFDctSelBaseAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 0, BFDctSelBaseOffsetReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  6,  2, BFMctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 13, 13, BFPrefIoDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 29, 29, BFFlushWrOnStpGnt);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  1,  1, BFWrtLvTrMode);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp);
+
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemRecNIsIdSupportedPh
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ */
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+
+  if ((LogicalIdPtr->Revision & AMD_F10_PH_ALL) != 0) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/PH/mrnPh.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/PH/mrnPh.h
new file mode 100644
index 0000000000..8fe4ade6c8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/PH/mrnPh.h
@@ -0,0 +1,96 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnPh.h
+ *
+ * Northbridge PH Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MRNPH_H_
+#define _MRNPH_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define _4GB_RJ8    ((UINT32)4 << (30 - 8))
+#define MTRR_VALID  11
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemRecConstructNBBlockPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemRecNSwitchDctPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  );
+
+VOID
+MemRecNSwitchChannelPh (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  );
+
+#endif  /* _MRNPH_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/RB/mrnRb.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/RB/mrnRb.c
new file mode 100644
index 0000000000..5a7418623e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/RB/mrnRb.c
@@ -0,0 +1,665 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnRb.c
+ *
+ * Common Northbridge  functions for RidgeBack Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 48317 $ @e \$Date: 2011-03-07 10:38:14 -0700 (Mon, 07 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mrnda.h"
+#include "mrnRb.h"
+#include "heapManager.h"
+#include "AdvancedApi.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_NB_RB_MRNRB_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define SPLIT_CHANNEL   0x20000000
+#define CHANNEL_SELECT  0x10000000
+#define MAX_DELAYS    9   /* 8 data bytes + 1 ECC byte */
+#define MAX_DIMMS     4   /* 4 DIMMs per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableRb (
+  IN OUT   TSEFO *NBRegTable
+  );
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  );
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  );
+
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+STATIC CONST UINT32 RecModeDefRegArrayRb[] = {
+  BFDramControlReg,  0x320C2A06,
+  BFDramBankAddrReg, 0x00001111,
+  BFDramMRSReg,      0x000400A4,
+  BFDramTimingLoReg, 0x000A0092,
+  BFDramTimingHiReg, 0xB6D218FF,
+  BFDramConfigLoReg, 0x00000000,
+  BFDramConfigHiReg, 0x1F48010B,
+  NULL
+};
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes the northbridge block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *MemPtr  - Pointer to the MEM_DATA_STRUCT
+ *     @param[in]       NodeID   - Node ID for this NB block
+ *
+ *     @return          TRUE  - This node is a RB and this NB block has been initialized
+ *     @return          FALSE - This node is not a RB
+ */
+
+BOOLEAN
+MemRecConstructNBBlockRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  )
+{
+  UINT8 i;
+  UINT8 Dct;
+  UINT8 Channel;
+  DIE_STRUCT *MCTPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+  //
+  // Determine if this is the expected NB Type
+  //
+  GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+  if (!MemRecNIsIdSupportedRb (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+    return FALSE;
+  }
+
+  //
+  // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+  //
+  MCTPtr = &MemPtr->DiesPerSystem[NodeID];
+  AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_DA * (
+                                          sizeof (DCT_STRUCT) + (
+                                            MAX_CHANNELS_PER_DCT_DA * (
+                                              sizeof (CH_DEF_STRUCT) + (
+                                                MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES
+                                              )
+                                            )
+                                          )
+                                        ) + (sizeof (TSEFO) * BFEndOfList);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    return FALSE;
+  }
+
+  MCTPtr->DctCount = MAX_DCTS_PER_NODE_DA;
+  MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+  AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_DA * sizeof (DCT_STRUCT);
+  for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) {
+    MCTPtr->DctData[Dct].Dct = Dct;
+    MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_DA;
+    MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+    MCTPtr->DctData[Dct].ChData[0].ChannelID = Dct;
+    AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_DA * sizeof (CH_DEF_STRUCT);
+    for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_DA; Channel++) {
+      MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2;
+      MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr;
+      MCTPtr->DctData[Dct].ChData[Channel].Dct = Dct;
+      AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+    }
+  }
+
+  //
+  //  Initialize NB block's variables
+  //
+  NBPtr->NBRegTable = (TSEFO *) AllocHeapParams.BufferPtr;
+  NBPtr->MemPtr = MemPtr;
+  NBPtr->RefPtr = MemPtr->ParameterListPtr;
+  NBPtr->MCTPtr = MCTPtr;
+  NBPtr->SPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+  NBPtr->AllNodeSPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL];
+
+  NBPtr->DctCachePtr = NBPtr->DctCache;
+
+  MemRecNInitNBRegTableRb (NBPtr->NBRegTable);
+  NBPtr->Dct = 0;
+  NBPtr->Channel = 0;
+  NBPtr->VarMtrrHiMsk = MemRecGetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+
+  LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+  LibAmdMemFill (NBPtr->IsSupported, FALSE, sizeof (NBPtr->IsSupported), &NBPtr->MemPtr->StdHeader);
+  for (i = 0; i < NumberOfHooks; i++) {
+    NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) MemRecDefTrue;
+  }
+
+  NBPtr->InitRecovery = MemRecNMemInitNb;
+
+  NBPtr->RecModeDefRegArray = RecModeDefRegArrayRb;
+
+  NBPtr->SwitchNodeRec = (VOID (*) (MEM_NB_BLOCK *, UINT8)) MemRecDefRet;
+  NBPtr->SwitchDCT = MemRecNSwitchDctRb;
+  NBPtr->SwitchChannel = MemRecNSwitchChannelRb;
+  NBPtr->SetMaxLatency = MemRecNSetMaxLatencyNb;
+  NBPtr->GetSysAddrRec = MemRecNGetMCTSysAddrNb;
+  NBPtr->SendMrsCmd = MemRecNSendMrsCmdNb;
+  NBPtr->sendZQCmd = MemRecNSendZQCmdNb;
+  NBPtr->SetDramOdtRec = MemRecNSetDramOdtNb;
+
+  NBPtr->GetBitField = MemRecNGetBitFieldNb;
+  NBPtr->SetBitField = MemRecNSetBitFieldNb;
+  NBPtr->GetTrainDly = MemRecNGetTrainDlyNb;
+  NBPtr->SetTrainDly = MemRecNSetTrainDlyNb;
+  NBPtr->MemRecNCmnGetSetFieldNb = MemRecNCmnGetSetFieldRb;
+  NBPtr->MemRecNcmnGetSetTrainDlyNb = MemRecNcmnGetSetTrainDlyRb;
+  NBPtr->MemRecNSwitchDctNb = MemRecNSwitchDctRb;
+  NBPtr->TrainingFlow = MemNRecTrainingFlowNb;
+  NBPtr->MemRecNInitializeMctNb = MemRecNInitializeMctDA;
+  NBPtr->MemRecNFinalizeMctNb = MemRecNFinalizeMctDA;
+  NBPtr->IsSupported[DramModeBeforeDimmPres] = TRUE;
+  NBPtr->IsSupported[CheckClearOnDimmMirror] = TRUE;
+  MemRecNSwitchDctRb (NBPtr, 0);
+
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current DCT to work on.
+ *   Should be called before accessing a certain DCT
+ *   All data structures will be updated to point to the current DCT
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Dct - ID of the target DCT
+ *
+ */
+
+VOID
+MemRecNSwitchDctRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  )
+{
+  NBPtr->Dct = Dct & 1;
+  NBPtr->SPDPtr = &(NBPtr->AllNodeSPDPtr[Dct * MAX_DIMMS_PER_CHANNEL]);
+  NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]);
+
+  MemRecNSwitchChannelRb (NBPtr, NBPtr->Channel);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the current channel to work on.
+ *   Should be called before accessing a certain channel
+ *   All data structures will be updated to point to the current channel
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   Channel - ID of the target channel
+ *
+ */
+
+VOID
+MemRecNSwitchChannelRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  )
+{
+  NBPtr->Channel = Channel & 1;
+  NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[NBPtr->Channel]);
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or set DQS timing during training.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNcmnGetSetTrainDlyRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  UINT16 Index;
+  UINT16 Offset;
+  UINT32 Value;
+  UINT32 Address;
+  UINT8 Dimm;
+  UINT8 Byte;
+
+  Dimm = DRBN_DIMM (DrbnVar);
+  Byte = DRBN_BYTE (DrbnVar);
+
+  ASSERT (Dimm < 4);
+  ASSERT (Byte <= 8);
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+    Index = 0x10;
+    break;
+  case AccessWrDqsDly:
+    Index = 0x30;
+    break;
+  case AccessWrDatDly:
+    Index = 0x01;
+    break;
+  case AccessRdDqsDly:
+    Index = 0x05;
+    break;
+  case AccessPhRecDly:
+    Index = 0x50;
+    break;
+  default:
+    Index = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+  case AccessWrDqsDly:
+    Index += (Dimm * 3);
+    if (Byte & 0x04) {
+      // if byte 4,5,6,7
+      Index += 0x10;
+    }
+    if (Byte & 0x02) {
+      // if byte 2,3,6,7
+      Index++;
+    }
+    Offset = 16 * (Byte % 2);
+    break;
+
+  case AccessRdDqsDly:
+    Field &= ~ 0x0001;
+  case AccessWrDatDly:
+    Index += (Dimm * 0x100);
+    // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+    // to run AccessPhRecDly sequence.
+  case AccessPhRecDly:
+    Index += (Byte / 4);
+    Offset = 8 * (Byte % 4);
+    break;
+  default:
+    Offset = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  Address = Index;
+  MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+  while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+  Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+
+  if (IsSet) {
+    if (TrnDly == AccessPhRecDly) {
+      Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03];
+    }
+
+    Value = ((UINT32)Field << Offset) | (Value & (~((UINT32)0xFF << Offset)));
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+    Address |= DCT_ACCESS_WRITE;
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+    while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+    if (TrnDly == AccessPhRecDly) {
+      NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value;
+    }
+  } else {
+    Value = (Value >> Offset) & 0xFF;
+  }
+
+  return Value;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets or sets a value to a bit field in a PCI register.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   IsSet - Indicates if the function will set or get
+ *     @param[in]   FieldName - Name of field to be set
+ *     @param[in]   Field - Value to be programmed
+ *
+ *     @return      value read, if the function is used as a "get"
+ */
+
+UINT32
+STATIC
+MemRecNCmnGetSetFieldRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  SBDFO Address;
+  PCI_ADDR PciAddr;
+  UINT8 Type;
+  UINT32 Value;
+  UINT32 Highbit;
+  UINT32 Lowbit;
+  UINT32 Mask;
+
+  Value = 0;
+  if (FieldName < BFEndOfList) {
+    Address = NBPtr->NBRegTable[FieldName];
+    if (Address) {
+      Lowbit = TSEFO_END (Address);
+      Highbit = TSEFO_START (Address);
+      Type = TSEFO_TYPE (Address);
+
+      // If Fn2 and DCT1 selected, set Address to be 1xx
+      if (((Address & 0xF000) == 0x2000) && NBPtr->Dct) {
+        Address |= 0x0100;
+      }
+      if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) {
+        // Special DCT Phy access
+        Address &= 0x0FFFFFFF;
+        Lowbit = 0;
+        Highbit = 16;
+      } else {
+        // Normal DCT Phy access
+        Address = TSEFO_OFFSET (Address);
+      }
+
+
+      if (Type == NB_ACCESS) {
+        Address |= (((UINT32) (24 + 0)) << 15);
+        PciAddr.AddressValue = Address;
+        LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+      } else if (Type == DCT_PHY_ACCESS) {
+        MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+        while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+
+        Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+      } else {
+        IDS_ERROR_TRAP;
+      }
+
+      if (IsSet) {
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        } else {
+          Mask = (UINT32)0xFFFFFFFF;
+        }
+        Value &= ~(Mask << Lowbit);
+        Value |= (Field & Mask) << Lowbit;
+
+        if (Type == NB_ACCESS) {
+          PciAddr.AddressValue = Address;
+          LibAmdPciWrite (AccessWidth32, PciAddr , &Value, &NBPtr->MemPtr->StdHeader);
+        } else if (Type == DCT_PHY_ACCESS) {
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+          Address |= DCT_ACCESS_WRITE;
+
+          MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+          while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {}
+        } else {
+          IDS_ERROR_TRAP;
+        }
+      } else {
+        Value = Value >> Lowbit;  // Shift
+        // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+        if ((Highbit - Lowbit) != 31) {
+          Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+        }
+      }
+    }
+  } else {
+    IDS_ERROR_TRAP;   // Invalid bit field index
+  }
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initializes bit field translation table
+ *
+ *     @param[in,out]   *NBRegTable   - Pointer to the NB Table *
+ */
+
+VOID
+STATIC
+MemRecNInitNBRegTableRb (
+  IN OUT   TSEFO *NBRegTable
+  )
+{
+  UINT16 i;
+  for (i = 0; i <= BFEndOfList; i++) {
+    NBRegTable[i] = 0;
+  }
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31,  0, BFDevVendorIDReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60),  2,  0, BFNodeID);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31,  0, BFCSBaseAddr0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31,  0, BFCSBaseAddr1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31,  0, BFCSBaseAddr2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31,  0, BFCSBaseAddr3Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31,  0, BFCSBaseAddr4Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31,  0, BFCSBaseAddr5Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31,  0, BFCSBaseAddr6Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31,  0, BFCSBaseAddr7Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31,  0, BFCSMask0Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31,  0, BFCSMask1Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31,  0, BFCSMask2Reg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31,  0, BFCSMask3Reg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31,  0, BFDramControlReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31,  0, BFDramInitRegReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31,  0, BFDramBankAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31,  0, BFDramMRSReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84),  9,  7, BFDramTerm);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31,  0, BFDramTimingLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31,  0, BFDramTimingHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31,  0, BFDramConfigLoReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31,  0, BFDramConfigHiReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31,  0, BFDctAddlOffsetReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31,  0, BFDctAddlDataReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4),  4,  0, BFNbFid);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15,  0, BFMrsAddress);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C),  7,  7, BFLevel);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90),  0,  0, BFInitDram);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  8,  8, BFDdr3Mode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94),  9,  9, BFLegacyBiosMode);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8),  6,  6, BFOdtSwizzle);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15, 8, BFCtrlWordCS);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110),  8, 8, BFDramEnabled);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 0, BFDctSelBaseAddrReg);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 0, BFDctSelBaseOffsetReg);
+
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C),  6,  2, BFMctWrLimit);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 13, 13, BFPrefIoDis);
+  MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 29, 29, BFFlushWrOnStpGnt);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31,  0, BFODCControl);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31,  0, BFAddrTmgControl);
+
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  0,  0, BFWrtLvTrEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  1,  1, BFWrtLvTrMode);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08,  5,  4, BFTrDimmSel);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11,  8, BFWrLvOdt);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+  MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp);
+
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemRecNIsIdSupportedRb
+ *      This function matches the CPU_LOGICAL_ID with certain criteria to
+ *      determine if it is supported by this NBBlock.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ */
+BOOLEAN
+STATIC
+MemRecNIsIdSupportedRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID *LogicalIdPtr
+  )
+{
+
+  if ((LogicalIdPtr->Revision & AMD_F10_RB_ALL) != 0) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/RB/mrnRb.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/RB/mrnRb.h
new file mode 100644
index 0000000000..9915c76bb4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/RB/mrnRb.h
@@ -0,0 +1,96 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnRb.h
+ *
+ * Northbridge RB Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MRNRB_H_
+#define _MRNRB_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define _4GB_RJ8    ((UINT32)4 << (30 - 8))
+#define MTRR_VALID  11
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemRecConstructNBBlockRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   MEM_DATA_STRUCT *MemPtr,
+  IN       UINT8 NodeID
+  );
+
+VOID
+MemRecNSwitchDctRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Dct
+  );
+
+VOID
+MemRecNSwitchChannelRb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Channel
+  );
+
+#endif  /* _MRNRB_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrn.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrn.c
new file mode 100644
index 0000000000..44abf5e6d2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrn.c
@@ -0,0 +1,189 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrn.c
+ *
+ * Common Northbridge  functions for Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/NB)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mm.h"
+#include "mn.h"
+#include "Filecode.h"
+#define FILECODE PROC_RECOVERY_MEM_NB_MRN_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define MAX_DCTS_PER_DIE 2
+#define SPLIT_CHANNEL   0x20000000
+#define CHANNEL_SELECT  0x10000000
+#define MAX_DELAYS    9   /* 8 data bytes + 1 ECC byte */
+#define MAX_DIMMS     4   /* 4 DIMMs per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets a bit field from PCI register
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Field name
+ *
+ *     @return      Bit field value
+ */
+
+UINT32
+MemRecNGetBitFieldNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName
+  )
+{
+  return NBPtr->MemRecNCmnGetSetFieldNb (NBPtr, 0, FieldName, 0);
+}
+
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets a bit field from PCI register
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   FieldName - Field name
+ *     @param[in]   Field - Value to be stored in PCT register
+ *
+ */
+
+VOID
+MemRecNSetBitFieldNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BIT_FIELD_NAME FieldName,
+  IN       UINT32 Field
+  )
+{
+  NBPtr->MemRecNCmnGetSetFieldNb (NBPtr, 1, FieldName, Field);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets a delay value a PCI register during training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *
+ *     @return      Value read
+ */
+
+UINT32
+MemRecNGetTrainDlyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar
+  )
+{
+  return NBPtr->MemRecNcmnGetSetTrainDlyNb (NBPtr, 0, TrnDly, DrbnVar, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets a delay value a PCI register during training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   TrnDly - type of delay to be set
+ *     @param[in]   DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ *                  (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *     @param[in]   Field - Value to be programmed
+ *
+ */
+
+VOID
+MemRecNSetTrainDlyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  NBPtr->MemRecNcmnGetSetTrainDlyNb (NBPtr, 1, TrnDly, DrbnVar, Field);
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrndct.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrndct.c
new file mode 100644
index 0000000000..2333be70d5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrndct.c
@@ -0,0 +1,1577 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrndct.c
+ *
+ * Northbridge common DCT support for Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/NB)
+ * @e \$Revision: 50454 $ @e \$Date: 2011-04-10 21:20:37 -0600 (Sun, 10 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "cpuFamRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mru.h"
+#include "ma.h"
+#include "Filecode.h"
+#define FILECODE PROC_RECOVERY_MEM_NB_MRNDCT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define RECDEF_CSMASK_REG         0x00083FE0
+#define RECDEF_DRAM_BASE_REG      0x00000003
+
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/// Type of an entry for processing phy init compensation for client NB
+typedef struct {
+  BIT_FIELD_NAME IndexBitField;          ///< Bit field on which the value is decided
+  BIT_FIELD_NAME StartTargetBitField;    ///< First bit field to be modified
+  BIT_FIELD_NAME EndTargetBitField;      ///< Last bit field to be modified
+  UINT16 ExtraValue;                     ///< Extra value needed to be written to bit field
+  CONST UINT16 (*TxPrePN)[4];         ///< Pointer to slew rate table
+} REC_PHY_COMP_INIT_CLIENTNB;
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemRecTCtlOnDimmMirrorNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BOOLEAN SetFlag
+  );
+
+VOID
+STATIC
+MemRecNSwapBitsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemRecNProgNbPstateDependentRegClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemRecNTrainPhyFenceNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+
+VOID
+STATIC
+MemRecNCommonReadWritePatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8  CmdType,
+  IN       UINT16 ClCount
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function programs the memory controller with configuration parameters
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_ERROR may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_ERROR may have occurred
+ */
+
+BOOLEAN
+MemRecNAutoConfigNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dimm;
+  UINT8 Dct;
+  UINT8 ChipSel;
+  UINT32 CSBase;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT16 i;
+
+  Dct = NBPtr->Dct;
+  DCTPtr = NBPtr->DCTPtr;
+  ChannelPtr = NBPtr->ChannelPtr;
+
+  //Prepare variables for future usage.
+  for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+    if ((ChannelPtr->ChDimmValid & (UINT8) 1 << Dimm) != 0) {
+      DCTPtr->Timings.CsPresent |= (UINT16) 1 << (Dimm * 2);
+      if (((ChannelPtr->DimmDrPresent & (UINT8) 1 << Dimm) == 0) && ((ChannelPtr->DimmQrPresent & (UINT8) 1 << Dimm) == 0)) {
+        continue;
+      } else {
+        DCTPtr->Timings.CsPresent |= (UINT16) 1 << (Dimm * 2 + 1);
+      }
+    }
+  }
+
+  Dimm = NBPtr->DimmToBeUsed;
+
+  //Temporarily set all CS Base/Limit registers (corresponding to Dimms exist on a channel) with 256MB size for WL training.
+  CSBase = 0;
+  for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+    if (DCTPtr->Timings.CsPresent & (UINT8) 1 << ChipSel) {
+
+      CSBase &= (UINT32) ~0x08; //Clear OnDimmMirror bit.
+      if (((ChipSel & 1) != 0) && ((ChannelPtr->DimmMirrorPresent & (UINT8) 1 << (ChipSel >> 1)) != 0)) {
+        CSBase |= (UINT32) 0x08; //Set OnDimmMirror bit.
+      }
+      MemRecNSetBitFieldNb (NBPtr, (BFCSBaseAddr0Reg + ChipSel), (CSBase | 0x01));
+      CSBase += 0x100000;
+      if ((ChipSel & 1) == 0) {
+        MemRecNSetBitFieldNb (NBPtr, (BFCSMask0Reg + (ChipSel >> 1)), RECDEF_CSMASK_REG);
+      }
+    }
+  }
+  MemRecNSetBitFieldNb (NBPtr, BFDramBaseReg0, RECDEF_DRAM_BASE_REG);
+  MemRecNSetBitFieldNb (NBPtr, BFDramLimitReg0, 0x70000);
+
+  // Disable the other DCT
+  NBPtr->MemRecNSwitchDctNb (NBPtr, Dct ^ 0x01);
+  MemRecNSetBitFieldNb (NBPtr, BFDisDramInterface, 1);
+  NBPtr->MemRecNSwitchDctNb (NBPtr, Dct);
+  if (Dct != 0) {
+    // If DCT 1, set DctSelBase registers
+    MemRecNSetBitFieldNb (NBPtr, BFDctSelBaseAddrReg, 0x00000003);
+    MemRecNSetBitFieldNb (NBPtr, BFDctSelBaseOffsetReg, 0x00000000);
+  }
+
+  // Use default values for common registers
+  i = 0;
+  while (NBPtr->RecModeDefRegArray[i] != NULL) {
+    MemRecNSetBitFieldNb (NBPtr, NBPtr->RecModeDefRegArray[i], NBPtr->RecModeDefRegArray[i + 1]);
+    i += 2;
+  }
+
+  // Other specific settings
+  MemRecNSetBitFieldNb (NBPtr, BFX4Dimm, ChannelPtr->Dimmx4Present );
+
+  if ((ChannelPtr->RegDimmPresent  == 0) && (ChannelPtr->SODimmPresent == 0)) {
+    MemRecNSetBitFieldNb (NBPtr, BFUnBuffDimm, 1);
+  }
+
+  if ((NBPtr->ChannelPtr->RegDimmPresent != 0) && (NBPtr->ChannelPtr->TechType == DDR3_TECHNOLOGY)) {
+    MemRecNSetBitFieldNb (NBPtr, BFSubMemclkRegDly, 1);
+  }
+  MemRecNSetBitFieldNb (NBPtr, BFOdtSwizzle, 1);
+
+  return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets platform specific config/timing values from the interface layer and
+ *   programs them into DCT.
+ *
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          TRUE - An Error value lower than AGESA_ERROR may have occurred
+ *     @return          FALSE - An Error value greater than or equal to AGESA_ERROR may have occurred
+ */
+
+BOOLEAN
+MemRecNPlatformSpecNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 p;
+
+  p = 0;
+  for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+    if (NBPtr->MemPtr->GetPlatformCfg[p] (NBPtr->MemPtr, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr) == AGESA_SUCCESS) {
+      MemRecNSetBitFieldNb (NBPtr, BFODCControl, NBPtr->ChannelPtr->DctOdcCtl);
+      MemRecNSetBitFieldNb (NBPtr, BFAddrTmgControl, NBPtr->ChannelPtr->DctAddrTmg);
+      return TRUE;
+    }
+  }
+  return FALSE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function  reads MemClkFreqVal bit to see if the DIMMs are present in this node.
+ *  If the DIMMs are present then set the DRAM Enable bit for this node.
+ *
+ *  Setting dram init starts up the DCT state machine, initializes the
+ *  dram devices with MRS commands, and kicks off any
+ *  HW memory clear process that the chip is capable of.  The sooner
+ *  that dram init is set for all nodes, the faster the memory system
+ *  initialization can complete.  Thus, the init loop is unrolled into
+ *  two loops so as to start the processes for non BSP nodes sooner.
+ *  This procedure will not wait for the process to finish.  Synchronization is
+ *  handled elsewhere.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNStartupDCTNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  // 1. Ensure F2x[1, 0]9C_x08[DisAutoComp] = 1.
+  // 2. BIOS waits 5 us for the disabling of the compensation engine to complete.
+  // ------- Done in InitPhyComp_Nb -------
+  //
+  MemRecNSetBitFieldNb (NBPtr, BFDisAutoComp, 1);
+  MemRecUWait10ns (500, NBPtr->MemPtr);
+
+  //MemRecNSetBitFieldNb (NBPtr, BFInitDram, 1);    // HW Dram init
+  AGESA_TESTPOINT (TpProcMemDramInit, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->TechPtr->DramInit (NBPtr->TechPtr);
+
+  // 7. Program F2x[1, 0]9C_x08[DisAutoComp] = 0.
+  // 8. BIOS must wait 750 us for the phy compensation engine
+  //    to reinitialize.
+  //
+  MemRecNSetBitFieldNb (NBPtr, BFDisAutoComp, 0);
+  MemRecUWait10ns (75000, NBPtr->MemPtr);
+
+  while (MemRecNGetBitFieldNb (NBPtr, BFDramEnabled) == 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function initializes the DRAM devices on all DCTs at the same time
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNStartupDCTClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", NBPtr->Dct);
+
+  // Program D18F2x[1,0]9C_x0000_000B = 80000000h. #109999.
+  MemRecNSetBitFieldNb (NBPtr, BFDramPhyStatusReg, 0x80000000);
+
+  // Program D18F2x[1,0]9C_x0D0F_E013[PllRegWaitTime] = 0118h. #193770.
+  MemRecNSetBitFieldNb (NBPtr, BFPllRegWaitTime, 0x118);
+
+  // Phy Voltage Level Programming
+  MemRecNPhyVoltageLevelNb (NBPtr);
+
+  // Run frequency change sequence
+  MemRecNSetBitFieldNb (NBPtr, BFPllLockTime, NBPtr->FreqChangeParam->PllLockTimeDefault);
+  MemRecNSetBitFieldNb (NBPtr, BFMemClkFreq, 6);
+  MemRecNProgNbPstateDependentRegClientNb (NBPtr);
+  MemRecNSetBitFieldNb (NBPtr, BFMemClkFreqVal, 1);
+  MemRecNSetBitFieldNb (NBPtr, BFPllLockTime, 0x000F);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClkAlign=0\n");
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tEnDramInit = 1 for DCT%d\n", NBPtr->Dct);
+  MemRecNSetBitFieldNb (NBPtr, BFDbeGskMemClkAlignMode, 0);
+  MemRecNSetBitFieldNb (NBPtr, BFEnDramInit, 1);
+
+  // Run DramInit sequence
+  AGESA_TESTPOINT (TpProcMemDramInit, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->TechPtr->DramInit (NBPtr->TechPtr);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nMemClkFreq: %d MHz\n", DDR800_FREQUENCY);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function  sets the maximum round-trip latency in the system from the processor to the DRAM
+ *   devices and back.
+
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     MaxRcvEnDly - Maximum receiver enable delay value
+ *
+ */
+
+VOID
+MemRecNSetMaxLatencyNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT16 MaxRcvEnDly
+  )
+{
+  UINT16 SubTotal;
+
+  AGESA_TESTPOINT (TpProcMemRcvrCalcLatency, &(NBPtr->MemPtr->StdHeader));
+
+  // Multiply the CAS Latency by two to get a number of 1/2 MEMCLKs UINTs.
+  SubTotal = 6 * 2;
+
+  // If registered DIMMs are being used then add 1 MEMCLK to the sub-total.
+  if (MemRecNGetBitFieldNb (NBPtr, BFUnBuffDimm) == 0) {
+    SubTotal += 2;
+  }
+
+  // if (AddrCmdSetup || CsOdtSetup || CkeSetup) then K := K + 2;
+  SubTotal += 2;
+
+  // If the F2x[1, 0]78[RdPtrInit] field is 4, 5, 6 or 7 MEMCLKs,
+  // then add 4, 3, 2, or 1 MEMCLKs, respectively to the sub-total.
+  //
+  SubTotal += 8 - 5;
+
+  // Add the maximum (worst case) delay value of DqsRcvEnGrossDelay
+  // that exists across all DIMMs and byte lanes.
+  //
+  SubTotal += MaxRcvEnDly >> 5;
+
+  // Add 5.5 to the sub-total. 5.5 represents part of the processor
+  // specific constant delay value in the DRAM clock domain.
+  //
+  SubTotal += 5;             // add 5.5 1/2MemClk
+
+  // Convert the sub-total (in 1/2 MEMCLKs) to northbridge clocks (NCLKs)
+  // as follows (assuming DDR400 and assuming that no P-state or link speed
+  // changes have occurred).
+  //
+  //     Simplified formula:
+  //     SubTotal *= (Fn2xD4[NBFid]+4)/4
+  //
+  SubTotal = SubTotal * ((UINT16) MemRecNGetBitFieldNb (NBPtr, BFNbFid) + 4);
+  SubTotal /= 4;
+
+  // Add 5 NCLKs to the sub-total. 5 represents part of the processor
+  // specific constant value in the northbridge clock domain.
+  //
+  SubTotal += 5;
+
+  // Program the F2x[1, 0]78[MaxRdLatency] register with the total delay value
+  MemRecNSetBitFieldNb (NBPtr, BFMaxLatency, SubTotal);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   Set Dram ODT for mission mode and write leveling mode.
+ *
+ *     @param[in,out]   *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       OdtMode    - Mission mode or write leveling mode
+ *     @param[in]       ChipSelect - Chip select number
+ *     @param[in]       TargetCS   - Chip select number that is being trained
+ *
+ */
+
+VOID
+MemRecNSetDramOdtNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       ODT_MODE OdtMode,
+  IN       UINT8 ChipSelect,
+  IN       UINT8 TargetCS
+  )
+{
+  UINT8 DramTerm;
+  UINT8 DramTermDyn;
+
+  DramTerm = NBPtr->ChannelPtr->Reserved[0];
+  DramTermDyn = NBPtr->ChannelPtr->Reserved[1];
+
+  if (OdtMode == WRITE_LEVELING_MODE) {
+    if (ChipSelect == TargetCS) {
+      DramTerm = DramTermDyn;
+      MemRecNSetBitFieldNb (NBPtr, BFWrLvOdt, NBPtr->ChannelPtr->PhyWLODT[TargetCS >> 1]);
+    }
+  }
+  MemRecNSetBitFieldNb (NBPtr, BFDramTerm, DramTerm);
+  MemRecNSetBitFieldNb (NBPtr, BFDramTermDyn, DramTermDyn);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends an MRS command
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNSendMrsCmdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BOOLEAN ClearODM;
+  ClearODM = FALSE;
+  if (NBPtr->IsSupported[CheckClearOnDimmMirror]) {
+    ClearODM = FALSE;
+    if ((NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_C0) != 0) {
+      if (NBPtr->IsSupported[CheckClearOnDimmMirror]) {
+        if (MemRecNGetBitFieldNb (NBPtr, BFEnDramInit) == 0) {
+          // For C0, if EnDramInit bit is cleared, ODM needs to be cleared before sending MRS
+          MemRecTCtlOnDimmMirrorNb (NBPtr, FALSE);
+          ClearODM = TRUE;
+        }
+      }
+    }
+  }
+
+  MemRecNSwapBitsNb (NBPtr);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d MR%d %04x\n",
+              MemRecNGetBitFieldNb (NBPtr, BFMrsChipSel),
+              MemRecNGetBitFieldNb (NBPtr, BFMrsBank),
+              MemRecNGetBitFieldNb (NBPtr, BFMrsAddress));
+
+  // 1.Set SendMrsCmd=1
+  MemRecNSetBitFieldNb (NBPtr, BFSendMrsCmd, 1);
+
+  // 2.Wait for SendMrsCmd=0
+  while (MemRecNGetBitFieldNb (NBPtr, BFSendMrsCmd)) {}
+
+  if (NBPtr->IsSupported[CheckClearOnDimmMirror]) {
+    if (ClearODM) {
+      // Restore ODM if necessary
+      MemRecTCtlOnDimmMirrorNb (NBPtr, TRUE);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends the ZQCL command
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNSendZQCmdNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  // 1.Program MrsAddress[10]=1
+  MemRecNSetBitFieldNb (NBPtr, BFMrsAddress, (UINT32) 1 << 10);
+
+  // 2.Set SendZQCmd=1
+  MemRecNSetBitFieldNb (NBPtr, BFSendZQCmd, 1);
+
+  // 3.Wait for SendZQCmd=0
+  while (MemRecNGetBitFieldNb (NBPtr, BFSendZQCmd)) {}
+
+  // 4.Wait 512 MEMCLKs
+  MemRecUWait10ns (128, NBPtr->MemPtr);   // 512*2.5ns=1280, wait 1280ns
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function disables/enables F2x[1, 0][5C:40][OnDimmMirror]
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]   SetFlag   - Enable or disable flag - TRUE - Enable, FALSE - DISABLE
+ *
+ */
+
+VOID
+STATIC
+MemRecTCtlOnDimmMirrorNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       BOOLEAN SetFlag
+  )
+{
+  UINT8 Chipsel;
+  UINT32 CSBaseAddrReg;
+
+  for (Chipsel = 0; Chipsel < MAX_CS_PER_CHANNEL; Chipsel += 2) {
+    CSBaseAddrReg = MemRecNGetBitFieldNb (NBPtr, BFCSBaseAddr1Reg + Chipsel);
+    if ((CSBaseAddrReg & 1) == 1) {
+      if (SetFlag && ((NBPtr->ChannelPtr->DimmMirrorPresent & ((UINT8) 1 << (Chipsel >> 1))) != 0)) {
+        CSBaseAddrReg |= ((UINT32) 1 << BFOnDimmMirror);
+      } else {
+        CSBaseAddrReg &= ~((UINT32) 1 << BFOnDimmMirror);
+      }
+      MemRecNSetBitFieldNb (NBPtr, BFCSBaseAddr1Reg + Chipsel, CSBaseAddrReg);
+    }
+  }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function swaps bits for OnDimmMirror support
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemRecNSwapBitsNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 ChipSel;
+  UINT32 MRSReg;
+
+  ChipSel = (UINT8) MemRecNGetBitFieldNb (NBPtr, BFMrsChipSel);
+  if ((ChipSel & 1) != 0) {
+    MRSReg = MemRecNGetBitFieldNb (NBPtr, BFDramInitRegReg);
+    if ((NBPtr->ChannelPtr->DimmMirrorPresent & (UINT8) 1 << (ChipSel >> 1)) != 0) {
+      MRSReg = (MRSReg & 0xFFFCFE07) | ((MRSReg&0x100A8) << 1) | ((MRSReg&0x20150) >> 1);
+      MemRecNSetBitFieldNb (NBPtr, BFDramInitRegReg, MRSReg);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function gets the total of sync components for Max Read Latency calculation
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return      Total in 1/2 MEMCLKs
+ */
+
+UINT32
+MemRecNTotalSyncComponentsClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT32 T;
+  UINT32 P;
+  UINT32 AddrTmgCtl;
+  UINT32 MemClkPeriod;
+
+  AGESA_TESTPOINT (TpProcMemRcvrCalcLatency , &(NBPtr->MemPtr->StdHeader));
+
+  // P = P + ((16 + RdPtrInitMin - D18F2x[1,0]78[RdPtrInit]) MOD 16) where RdPtrInitMin = RdPtrInit
+  P = 0;
+
+  AddrTmgCtl = MemRecNGetBitFieldNb (NBPtr, BFAddrTmgControl);
+  if (((AddrTmgCtl >> 16) & 0x20) != (AddrTmgCtl & 0x20)) {
+    P += 1;
+  }
+
+  // IF (DbeGskMemClkAlignMode==01b || (DbeGskMemClkAlignMode==00b && !(AddrCmdSetup==CsOdtSetup==CkeSetup)))
+  // THEN P = P + 1
+
+  // IF (SlowAccessMode==1) THEN P = P + 2
+
+  // T = T + (0.5 * MemClkPeriod) - 786 ps
+  MemClkPeriod = 1000000 / DDR800_FREQUENCY;
+  T = MemClkPeriod / 2 - 768;
+
+  // If (AddrCmdSetup==0 && CsOdtSetup==0 && CkeSetup==0)
+  // then P = P + 1
+  // else P = P + 2
+  if ((AddrTmgCtl & 0x0202020) == 0) {
+    P += 1;
+  } else {
+    P += 2;
+  }
+
+  // P = P + (2 * (D18F2x[1,0]88[Tcl] clocks - 1))
+  P += 2 * 5;  // Tcl = 6 clocks
+
+  // (DisCutThroughMode = 0), so P = P + 3
+  P += 3;
+
+  return ((P * MemClkPeriod + 1) / 2) + T;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function programs the phy registers according to the desired phy VDDIO voltage level
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNPhyVoltageLevelNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  BIT_FIELD_NAME BitField;
+  UINT16 Value;
+  UINT16 Mask;
+
+  Mask = 0xFFE7;
+  Value = (UINT16) CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage) << 3;
+
+  for (BitField = BFDataRxVioLvl; BitField <= BFCmpVioLvl; BitField++) {
+    if (BitField == BFCmpVioLvl) {
+      Mask = 0x3FFF;
+      Value <<= (14 - 3);
+    }
+    MemRecNSetBitFieldNb (NBPtr, BitField, ((MemRecNGetBitFieldNb (NBPtr, BitField) & Mask)) | Value);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *   This function executes Phy fence training
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemRecNTrainPhyFenceNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Byte;
+  UINT16 Avg;
+  UINT8 PREvalue;
+
+  if (MemRecNGetBitFieldNb (NBPtr, BFDisDramInterface)) {
+    return;
+  }
+
+  // 1. BIOS first programs a seed value to the phase recovery
+  //    engine registers.
+  //
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tSeeds: ");
+  for (Byte = 0; Byte < 9; Byte++) {
+    // This includes ECC as byte 8
+    MemRecNSetTrainDlyNb (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (0, Byte), 19);
+    IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", 19);
+  }
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tPhyFenceTrEn = 1");
+  // 2. Set F2x[1, 0]9C_x08[PhyFenceTrEn]=1.
+  MemRecNSetBitFieldNb (NBPtr, BFPhyFenceTrEn, 1);
+
+  MemRecUWait10ns (5000, NBPtr->MemPtr);
+
+  // 4. Clear F2x[1, 0]9C_x08[PhyFenceTrEn]=0.
+  MemRecNSetBitFieldNb (NBPtr, BFPhyFenceTrEn, 0);
+
+  // 5. BIOS reads the phase recovery engine registers
+  //    F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52.
+  // 6. Calculate the average value of the fine delay and subtract 8.
+  //
+  Avg = 0;
+  for (Byte = 0; Byte < 9; Byte++) {
+    // This includes ECC as byte 8
+    PREvalue = (UINT8) (0x1F & MemRecNGetTrainDlyNb (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (0, Byte)));
+    Avg = Avg + ((UINT16) PREvalue);
+  }
+  Avg = ((Avg + 8) / 9);    // round up
+  Avg -= 6;
+
+  // 7. Write the value to F2x[1, 0]9C_x0C[PhyFence].
+  MemRecNSetBitFieldNb (NBPtr, BFPhyFence, Avg);
+
+  // 8. BIOS rewrites F2x[1, 0]9C_x04, DRAM Address/Command Timing Control
+  //    Register delays for both channels. This forces the phy to recompute
+  //    the fence.
+  //
+  MemRecNSetBitFieldNb (NBPtr, BFAddrTmgControl, MemRecNGetBitFieldNb (NBPtr, BFAddrTmgControl));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function calculates and programs NB P-state dependent registers
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemRecNProgNbPstateDependentRegClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 i;
+  UINT8 NclkFid;
+  UINT16 MemClkDid;
+  UINT8 PllMult;
+  UINT8 NclkDiv;
+  UINT8 RdPtrInit;
+  UINT32 NclkPeriod;
+  UINT32 MemClkPeriod;
+  INT32 PartialSum2x;
+  INT32 PartialSumSlotI2x;
+  INT32 RdPtrInitRmdr2x;
+
+  NclkFid = (UINT8) (MemRecNGetBitFieldNb (NBPtr, BFMainPllOpFreqId) + 0x10);
+  MemClkDid = 2; //BKDG recommended value for DDR800
+  PllMult = 16;  //BKDG recommended value for DDR800
+  NclkDiv = (UINT8) MemRecNGetBitFieldNb (NBPtr, BFNbPs0NclkDiv);
+
+  NclkPeriod = (2500 * NclkDiv) / NclkFid;
+  MemClkPeriod = 1000000 / DDR800_FREQUENCY;
+  NBPtr->NBClkFreq = ((UINT32) NclkFid * 400) / NclkDiv;
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\tNB P%d  Freq: %dMHz\n", 0, NBPtr->NBClkFreq);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClk Freq: %dMHz\n", DDR800_FREQUENCY);
+
+  // D18F2x[1,0]78[RdPtrInit] = IF (D18F2x[1,0]94[MemClkFreq] >= 667 MHz) THEN 7 ELSE 8 ENDIF (Llano)
+  //                                                                      THEN 2 ELSE 3 ENDIF (Ontario)
+  RdPtrInit = NBPtr->FreqChangeParam->RdPtrInitLower667;
+  MemRecNSetBitFieldNb (NBPtr, BFRdPtrInit, RdPtrInit);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tRdPtr: %d\n", RdPtrInit);
+
+  // Program D18F2x[1,0]F4_x30[DbeGskFifoNumerator] and D18F2x[1,0]F4_x31[DbeGskFifoDenominator].
+  MemRecNSetBitFieldNb (NBPtr, BFDbeGskFifoNumerator, NclkFid * MemClkDid * 16);
+  MemRecNSetBitFieldNb (NBPtr, BFDbeGskFifoDenominator, PllMult * NclkDiv);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tDbeGskFifoNumerator: %d\n", NclkFid * MemClkDid * 16);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tDbeGskFifoDenominator: %d\n", PllMult * NclkDiv);
+
+  // Program D18F2x[1,0]F4_x32[DataTxFifoSchedDlyNegSlot1, DataTxFifoSchedDlySlot1,
+  // DataTxFifoSchedDlyNegSlot0, DataTxFifoSchedDlySlot0].
+  //   PartialSum = ((7 * NclkPeriod) + (1.5 * MemClkPeriod) + 520ps)*MemClkFrequency - tCWL -
+  //   CmdSetup - PtrSeparation - 1. (Llano)
+  //   PartialSum = ((5 * NclkPeriod) + MemClkPeriod) + 520ps)*MemClkFrequency - tCWL -
+  //   CmdSetup - PtrSeparation - 1. (Ontario)
+  PartialSum2x = NBPtr->FreqChangeParam->NclkPeriodMul2x * NclkPeriod;
+  PartialSum2x += NBPtr->FreqChangeParam->MemClkPeriodMul2x * MemClkPeriod;
+  PartialSum2x += 520 * 2;
+
+  // PtrSeparation = ((16 + RdPtrInitMin - D18F2x[1,0]78[RdPtrInit]) MOD 16)/2 + RdPtrInitRmdr
+  // RdPtrInitRmdr = (((2.25 * MemClkPeriod) - 1520ps) MOD MemClkPeriod)/MemClkPeriod
+  RdPtrInitRmdr2x = ((NBPtr->FreqChangeParam->SyncTimeMul4x * MemClkPeriod) / 2) - 2 * (NBPtr->FreqChangeParam->TDataPropLower800 + 520);
+  RdPtrInitRmdr2x %= MemClkPeriod;
+  PartialSum2x -= RdPtrInitRmdr2x;
+  PartialSum2x = (PartialSum2x + MemClkPeriod - 1) / MemClkPeriod;  // round-up here
+  PartialSum2x -= 2 * 5;  //Tcwl + 5
+
+  if ((MemRecNGetBitFieldNb (NBPtr, BFAddrTmgControl) & 0x0202020) == 0) {
+    PartialSum2x -= 1;
+  } else {
+    PartialSum2x -= 2;
+  }
+  PartialSum2x -= 2;
+
+  // If PartialSumSlotN is positive:
+  //   DataTxFifoSchedDlySlotN=CEIL(PartialSumSlotN).
+  //   DataTxFifoSchedDlyNegSlotN=0.
+  // Else if PartialSumSlotN is negative:
+  //   DataTxFifoSchedDlySlotN=ABS(CEIL(PartialSumSlotN*MemClkPeriod/NclkPeriod)).
+  //   DataTxFifoSchedDlyNegSlotN=1.
+  for (i = 0; i < 2; i++) {
+    PartialSumSlotI2x = PartialSum2x;
+    if (i == 0) {
+    PartialSumSlotI2x += 2;
+    }
+    if (PartialSumSlotI2x > 0) {
+      MemRecNSetBitFieldNb (NBPtr, BFDataTxFifoSchedDlyNegSlot0 + i, 0);
+      MemRecNSetBitFieldNb (NBPtr, BFDataTxFifoSchedDlySlot0 + i, (PartialSumSlotI2x + 1) / 2);
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\tDataTxFifoSchedDlySlot%d: %d\n", i, (PartialSumSlotI2x + 1) / 2);
+    } else {
+      MemRecNSetBitFieldNb (NBPtr, BFDataTxFifoSchedDlyNegSlot0 + i, 1);
+      PartialSumSlotI2x = ((-PartialSumSlotI2x) * MemClkPeriod) / (2 * NclkPeriod);
+      MemRecNSetBitFieldNb (NBPtr, BFDataTxFifoSchedDlySlot0 + i, PartialSumSlotI2x);
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\tDataTxFifoSchedDlySlot%d: -%d\n", i, PartialSumSlotI2x);
+    }
+  }
+  // Program ProcOdtAdv
+  MemRecNSetBitFieldNb (NBPtr, BFProcOdtAdv, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function reads cache lines continuously using TCB CPG engine
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out] Buffer - Array of bytes to be filled with data read from DRAM
+ *     @param[in]     Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemRecNContReadPatternClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  // 1. Program D18F2x1C0[RdDramTrainMode]=1.
+  MemRecNSetBitFieldNb (NBPtr, BFRdDramTrainMode, 1);
+
+  // 2. Program D18F2x1C0[TrainLength] to the appropriate number of cache lines.
+  MemRecNSetBitFieldNb (NBPtr, BFTrainLength, ClCount);
+
+  // 3. Program the DRAM training address as follows:
+  MemRecNSetBitFieldNb (NBPtr, BFWrTrainAdrPtrLo, (Address >> 6));
+
+  // 4. Program D18F2x1D0[WrTrainBufAddr]=000h
+  MemRecNSetBitFieldNb (NBPtr, BFWrTrainBufAddr, 0);
+
+  // 5. Program D18F2x1C0[RdTrainGo]=1.
+  MemRecNSetBitFieldNb (NBPtr, BFRdTrainGo, 1);
+
+  // 6. Wait for D18F2x1C0[RdTrainGo]=0.
+  while (MemRecNGetBitFieldNb (NBPtr, BFRdTrainGo) != 0) {}
+
+  // 7. Read D18F2x1E8[TrainCmpSts] and D18F2x1E8[TrainCmpSts2].
+
+  // 8. Program D18F2x1C0[RdDramTrainMode]=0.
+  MemRecNSetBitFieldNb (NBPtr, BFRdDramTrainMode, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for the systems with UDIMMs configuration
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID        Socket number
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->Reserved[0]       Dram Term for specified channel
+ *     @return          CurrentChannel->Reserved[1]       Dynamic Dram Term for specified channel
+ *     @return          CurrentChannel->PhyWLODT[0]       WL ODT for DIMM0
+ *     @return          CurrentChannel->PhyWLODT[1]       WL ODT for DIMM1
+ *     @return          CurrentChannel->PhyWLODT[2]       WL ODT for DIMM2
+ *     @return          CurrentChannel->PhyWLODT[3]       WL ODT for DIMM3
+ *
+ */
+AGESA_STATUS
+MemRecNGetPsCfgUDIMM3Nb (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT8 Dimms;
+  UINT8  MaxDimmPerCH;
+  UINT8 DramTerm;
+  UINT8 DramTermDyn;
+
+  if ((CurrentChannel->RegDimmPresent != 0) || (CurrentChannel->SODimmPresent != 0)) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  Dimms = CurrentChannel->Dimms;
+  MaxDimmPerCH = RecGetMaxDimmsPerChannel (MemData->ParameterListPtr->PlatformMemoryConfiguration, 0, CurrentChannel->ChannelID);
+
+  if (MaxDimmPerCH == 1) {
+    return AGESA_UNSUPPORTED;
+  } else {
+    DctOdcCtl = 0x20223323;
+    AddrTmgCTL = 0x00390039;
+    if (Dimms == 1) {
+      DctOdcCtl = 0x20113222;
+      AddrTmgCTL = 0x00390039;
+      if (CurrentChannel->Loads == 16) {
+        AddrTmgCTL = 0x003B0000;
+      }
+    }
+  }
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+
+  // ODT
+  if (Dimms == 1) {
+    DramTerm = 1; // 60 ohms
+    DramTermDyn = 0; // Disable
+    if ((MaxDimmPerCH == 3) && (CurrentChannel->DimmDrPresent != 0)) {
+      DramTermDyn = 1; // 60 ohms
+    }
+  } else {
+    DramTerm = 3; // 40 ohms
+    DramTermDyn = 2; // 120 ohms
+  }
+  CurrentChannel->Reserved[0] = DramTerm;
+  CurrentChannel->Reserved[1] = DramTermDyn;
+
+  // WL ODT
+  if (Dimms == 1) {
+    CurrentChannel->PhyWLODT[0] = 0;
+    CurrentChannel->PhyWLODT[1] = (CurrentChannel->DimmDrPresent != 0) ? 8 : 2;
+  } else {
+    CurrentChannel->PhyWLODT[0] = 3;
+    CurrentChannel->PhyWLODT[1] = 3;
+  }
+  CurrentChannel->PhyWLODT[2] = 0;
+  CurrentChannel->PhyWLODT[3] = 0;
+
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for the systems with SODIMMs configuration
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID        Socket number
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->Reserved[0]       Dram Term for specified channel
+ *     @return          CurrentChannel->Reserved[1]       Dynamic Dram Term for specified channel
+ *     @return          CurrentChannel->PhyWLODT[0]       WL ODT for DIMM0
+ *     @return          CurrentChannel->PhyWLODT[1]       WL ODT for DIMM1
+ *     @return          CurrentChannel->PhyWLODT[2]       WL ODT for DIMM2
+ *     @return          CurrentChannel->PhyWLODT[3]       WL ODT for DIMM3
+ *
+ */
+AGESA_STATUS
+MemRecNGetPsCfgSODIMM3Nb (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT8  MaxDimmPerCH;
+  UINT8 Dimms;
+  UINT8 DramTerm;
+  UINT8 DramTermDyn;
+
+  if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  Dimms = CurrentChannel->Dimms;
+  MaxDimmPerCH = RecGetMaxDimmsPerChannel (MemData->ParameterListPtr->PlatformMemoryConfiguration, 0, CurrentChannel->ChannelID);
+
+  if (MaxDimmPerCH == 1) {
+    DctOdcCtl = 0x00113222;
+    AddrTmgCTL = 0;
+  } else {
+    DctOdcCtl = 0x00223323;
+    AddrTmgCTL = 0x00000039;
+    if (Dimms == 1) {
+      DctOdcCtl = 0x00113222;
+      AddrTmgCTL = 0;
+    }
+  }
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+
+  // ODT
+  if (Dimms == 1) {
+    DramTerm = 2; // 120 ohms
+    DramTermDyn = 0; // Disable
+    if (MaxDimmPerCH == 2) {
+      DramTerm = 1; // 60 ohms
+    }
+  } else {
+    DramTerm = 3; // 40 ohms
+    DramTermDyn = 2; // 120 ohms
+  }
+  CurrentChannel->Reserved[0] = DramTerm;
+  CurrentChannel->Reserved[1] = DramTermDyn;
+
+  // WL ODT
+  if (Dimms == 1) {
+    if (MaxDimmPerCH == 1) {
+      CurrentChannel->PhyWLODT[0] = (CurrentChannel->DimmDrPresent != 0) ? 4 : 1;
+      CurrentChannel->PhyWLODT[1] = 0;
+    } else {
+      CurrentChannel->PhyWLODT[0] = 0;
+      CurrentChannel->PhyWLODT[1] = (CurrentChannel->DimmDrPresent != 0) ? 8 : 2;
+    }
+  } else {
+    CurrentChannel->PhyWLODT[0] = 3;
+    CurrentChannel->PhyWLODT[1] = 3;
+  }
+  CurrentChannel->PhyWLODT[2] = 0;
+  CurrentChannel->PhyWLODT[3] = 0;
+
+  return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This is function sets the platform specific settings for the systems with RDIMMs configuration
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID        Socket number
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_SUCCESS
+ *     @return          CurrentChannel->DctAddrTmg        Address Command Timing Settings for specified channel
+ *     @return          CurrentChannel->DctOdcCtl         Drive Strength settings for specified channel
+ *     @return          CurrentChannel->Reserved[0]       Dram Term for specified channel
+ *     @return          CurrentChannel->Reserved[1]       Dynamic Dram Term for specified channel
+ *     @return          CurrentChannel->PhyWLODT[0]       WL ODT for DIMM0
+ *     @return          CurrentChannel->PhyWLODT[1]       WL ODT for DIMM1
+ *     @return          CurrentChannel->PhyWLODT[2]       WL ODT for DIMM2
+ *     @return          CurrentChannel->PhyWLODT[3]       WL ODT for DIMM3
+ *
+ */
+
+AGESA_STATUS
+MemRecNGetPsCfgRDIMM3Nb (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY RecPSCfg2DIMMsWlODT[] = {
+    {SR_DIMM0,            {0x01, 0x00, 0x00, 0x00}, 1},
+    {DR_DIMM0,            {0x04, 0x00, 0x00, 0x00}, 1},
+    {QR_DIMM0,            {0x05, 0x00, 0x00, 0x00}, 1},
+    {SR_DIMM1,            {0x00, 0x02, 0x00, 0x00}, 1},
+    {DR_DIMM1,            {0x00, 0x08, 0x00, 0x00}, 1},
+    {QR_DIMM1,            {0x00, 0x0A, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2},
+    {SR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {QR_DIMM0 + SR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2},
+    {QR_DIMM0 + DR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2},
+    {QR_DIMM0 + QR_DIMM1, {0x0B, 0x07, 0x0E, 0x0D}, 2}
+  };
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY RecPSCfg3DIMMsWlODT[] = {
+    {SR_DIMM2 + DR_DIMM2, {0x00, 0x00, 0x04, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0, {0x01, 0x02, 0x00, 0x00}, 1},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, {0x05, 0x00, 0x05, 0x00}, 2},
+    {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x07, 0x07, 0x07, 0x00}, 3},
+    {QR_DIMM1, {0x00, 0x0A, 0x00, 0x0A}, 1},
+    {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x00, 0x06, 0x0E, 0x0C}, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2},
+    {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x0F, 0x07, 0x0F, 0x0D}, 3}
+  };
+  STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY RecPSCfg4DIMMsWlODT[] = {
+    {ANY_DIMM3, {0x00, 0x00, 0x00, 0x08}, 1},
+    {ANY_DIMM2 + ANY_DIMM3, {0x00, 0x00, 0x0C, 0x0C}, 2},
+    {ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x00, 0x0E, 0x0E, 0x0E}, 3},
+    {ANY_DIMM0 + ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x0F, 0x0F, 0x0F, 0x0F}, 4}
+  };
+
+  UINT8 i;
+  UINT8 j;
+  UINT8 Dimms;
+  UINT8 DimmQrPresent;
+  UINT32 AddrTmgCTL;
+  UINT32 DctOdcCtl;
+  UINT8 PhyWLODT[4];
+  UINT8 DramTerm;
+  UINT8 DramTermDyn;
+  UINT16 DIMMRankType;
+  UINT16 _DIMMRankType_;
+  UINT8 DimmTpMatch;
+  UINT8  MaxDimmPerCH;
+  UINT8 PSCfgWlODTSize;
+  CONST ADV_R_PSCFG_WL_ODT_ENTRY *PSCfgWlODTPtr;
+
+  if (CurrentChannel->RegDimmPresent != CurrentChannel->ChDimmValid) {
+    return AGESA_UNSUPPORTED;
+  }
+
+  DIMMRankType = MemRecNGetPsRankType (CurrentChannel);
+  MaxDimmPerCH = RecGetMaxDimmsPerChannel (MemData->ParameterListPtr->PlatformMemoryConfiguration, 0, CurrentChannel->ChannelID);
+  Dimms = CurrentChannel->Dimms;
+  PSCfgWlODTPtr = RecPSCfg2DIMMsWlODT;
+  PSCfgWlODTSize = GET_SIZE_OF (RecPSCfg2DIMMsWlODT);
+  PhyWLODT[0] = PhyWLODT[1] = PhyWLODT[2] = PhyWLODT[3] = 0xFF;
+  DimmQrPresent = CurrentChannel->DimmQrPresent;
+
+  if (MaxDimmPerCH == 4) {
+    AddrTmgCTL = (Dimms > 2) ? 0x002F0000 : 0;
+    DctOdcCtl = (Dimms == 1) ? 0x20113222 : 0x20223222;
+    PSCfgWlODTPtr = RecPSCfg4DIMMsWlODT;
+    PSCfgWlODTSize = GET_SIZE_OF (RecPSCfg4DIMMsWlODT);
+  } else  if (MaxDimmPerCH == 3) {
+    AddrTmgCTL = 0;
+    DctOdcCtl = 0x20223222;
+    if (Dimms == 3) {
+      AddrTmgCTL = 0x00380038;
+      DctOdcCtl = 0x20113222;
+    }
+    if (Dimms == 1) {
+      DctOdcCtl = 0x20113222;
+    }
+    PSCfgWlODTPtr = RecPSCfg3DIMMsWlODT;
+    PSCfgWlODTSize = GET_SIZE_OF (RecPSCfg3DIMMsWlODT);
+  } else if (MaxDimmPerCH == 2) {
+    AddrTmgCTL = 0;
+    DctOdcCtl = 0x20223222;
+    if ((Dimms == 1) && (DimmQrPresent == 0)) {
+      DctOdcCtl = 0x20113222;
+    }
+  } else {
+    AddrTmgCTL = 0;
+    DctOdcCtl = (DimmQrPresent == 0) ? 0x20113222 : 0x20223222;
+  }
+  CurrentChannel->DctAddrTmg = AddrTmgCTL;
+  CurrentChannel->DctOdcCtl = DctOdcCtl;
+
+  // ODT
+  if (Dimms == 1) {
+    DramTerm = 1; // 60 ohms
+    DramTermDyn = 0; // Disable
+    if (DimmQrPresent != 0) {
+      DramTermDyn = 2; // 120 ohms
+    }
+  } else {
+    DramTerm = 3; // 40 ohms
+    DramTermDyn = 2; // 120 ohms
+    if (DimmQrPresent != 0) {
+      DramTerm = 1; // 60 ohms
+    }
+  }
+  CurrentChannel->Reserved[0] = DramTerm;
+  CurrentChannel->Reserved[1] = DramTermDyn;
+
+  // WL ODT
+  for (i = 0; i  < PSCfgWlODTSize; i++, PSCfgWlODTPtr++) {
+    if (Dimms != PSCfgWlODTPtr->Dimms) {
+      continue;
+    }
+    DimmTpMatch = 0;
+    _DIMMRankType_ = DIMMRankType & PSCfgWlODTPtr->DIMMRankType;
+    for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
+      if ((_DIMMRankType_ & (UINT16) 0x0F << (j << 2)) != 0) {
+        DimmTpMatch++;
+      }
+    }
+    if (DimmTpMatch == PSCfgWlODTPtr->Dimms) {
+      PhyWLODT[0] = PSCfgWlODTPtr->PhyWrLvOdt[0];
+      PhyWLODT[1] = PSCfgWlODTPtr->PhyWrLvOdt[1];
+      PhyWLODT[2] = PSCfgWlODTPtr->PhyWrLvOdt[2];
+      PhyWLODT[3] = PSCfgWlODTPtr->PhyWrLvOdt[3];
+      break;
+    }
+  }
+  CurrentChannel->PhyWLODT[0] = PhyWLODT[0];
+  CurrentChannel->PhyWLODT[1] = PhyWLODT[1];
+  CurrentChannel->PhyWLODT[2] = PhyWLODT[2];
+  CurrentChannel->PhyWLODT[3] = PhyWLODT[3];
+
+  return AGESA_SUCCESS;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function returns the max dimms for a given memory channel on a given
+ *  processor.  It first searches the platform override table for the max dimms
+ *  value.  If it is not provided, the AGESA default value is returned. The target
+ *  socket must be a valid present socket.
+ *
+ *     @param[in] PlatformMemoryConfiguration - Platform config table
+ *     @param[in] SocketID  - ID of the processor that owns the channel
+ *     @param[in] ChannelID - Channel to get max dimms for
+ *
+ *
+ *     @return UINT8 - Max Number of Dimms for that channel
+ */
+UINT8
+RecGetMaxDimmsPerChannel (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       UINT8 SocketID,
+  IN       UINT8 ChannelID
+  )
+{
+  UINT8  *DimmsPerChPtr;
+  UINT8  MaxDimmPerCH;
+
+  DimmsPerChPtr = MemRecFindPSOverrideEntry (PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, ChannelID, 0);
+  if (DimmsPerChPtr != NULL) {
+    MaxDimmPerCH = *DimmsPerChPtr;
+  } else {
+    MaxDimmPerCH = 2;
+  }
+
+  return MaxDimmPerCH;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This is the default return function of the ARDK block. The function always
+ *    returns   AGESA_UNSUPPORTED
+ *
+ *     @param[in,out]   *MemData           Pointer to MEM_DATA_STRUCTURE
+ *     @param[in]       SocketID        Socket number
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          AGESA_UNSUPPORTED  AGESA status indicating that default is unsupported
+ *
+ */
+
+AGESA_STATUS
+MemRecNGetPsCfgDef (
+  IN OUT   MEM_DATA_STRUCT *MemData,
+  IN       UINT8 SocketID,
+  IN OUT   CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  return AGESA_UNSUPPORTED;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function returns the rank type map of a channel.
+ *
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          UINT16 - The map of rank type.
+ *
+ */
+UINT16
+MemRecNGetPsRankType (
+  IN       CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  UINT8 i;
+  UINT16 DIMMRankType;
+
+  DIMMRankType = 0;
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+    if ((CurrentChannel->DimmQrPresent & (UINT8) 1 << i) != 0) {
+      if (i < 2) {
+        DIMMRankType |= (UINT16) 4 << (i << 2);
+      }
+    } else if ((CurrentChannel->DimmDrPresent & (UINT8) 1 << i) != 0) {
+      DIMMRankType |= (UINT16) 2 << (i << 2);
+    } else if ((CurrentChannel->DimmSRPresent & (UINT8) 1 << i) != 0) {
+      DIMMRankType |= (UINT16) 1 << (i << 2);
+    }
+  }
+  return DIMMRankType;
+}
+
+UINT32
+MemRecNcmnGetSetTrainDlyClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 IsSet,
+  IN       TRN_DLY_TYPE TrnDly,
+  IN       DRBN DrbnVar,
+  IN       UINT16 Field
+  )
+{
+  UINT16 Index;
+  UINT16 Offset;
+  UINT32 Value;
+  UINT32 Address;
+  UINT8 Dimm;
+  UINT8 Byte;
+
+  Dimm = DRBN_DIMM (DrbnVar);
+  Byte = DRBN_BYTE (DrbnVar);
+
+  ASSERT (Dimm < 2);
+  ASSERT (Byte <= ECC_DLY);
+
+  if ((Byte > 7)) {
+    // LN and ON do not support ECC delay, so:
+    if (IsSet) {
+      // On write, ignore
+      return 0;
+    } else {
+      // On read, redirect to byte 0 to correct fence averaging
+      Byte = 0;
+    }
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+    Index = 0x10;
+    break;
+  case AccessWrDqsDly:
+    Index = 0x30;
+    break;
+  case AccessWrDatDly:
+    Index = 0x01;
+    break;
+  case AccessRdDqsDly:
+    Index = 0x05;
+    break;
+  case AccessPhRecDly:
+    Index = 0x50;
+    break;
+  default:
+    Index = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  switch (TrnDly) {
+  case AccessRcvEnDly:
+  case AccessWrDqsDly:
+    Index += (Dimm * 3);
+    if (Byte & 0x04) {
+      // if byte 4,5,6,7
+      Index += 0x10;
+    }
+    if (Byte & 0x02) {
+      // if byte 2,3,6,7
+      Index++;
+    }
+    Offset = 16 * (Byte % 2);
+    break;
+
+  case AccessRdDqsDly:
+  case AccessWrDatDly:
+    Index += (Dimm * 0x100);
+    // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+    // to run AccessPhRecDly sequence.
+  case AccessPhRecDly:
+    Index += (Byte / 4);
+    Offset = 8 * (Byte % 4);
+    break;
+  default:
+    Offset = 0;
+    IDS_ERROR_TRAP;
+  }
+
+  Address = Index;
+  MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+  Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+
+  if (IsSet) {
+    if (TrnDly == AccessPhRecDly) {
+      Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03];
+    }
+
+    Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) ((TrnDly == AccessRcvEnDly) ? 0x1FF : 0xFF) << Offset)));
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+    Address |= DCT_ACCESS_WRITE;
+    MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+
+    if (TrnDly == AccessPhRecDly) {
+      NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value;
+    }
+    // Gross WrDatDly and WrDqsDly cannot be larger than 4
+    ASSERT (((TrnDly == AccessWrDatDly) || (TrnDly == AccessWrDqsDly)) ? (NBPtr->IsSupported[WLNegativeDelay] || (Field < 0xA0)) : TRUE);
+  } else {
+    Value = (Value >> Offset) & (UINT32) ((TrnDly == AccessRcvEnDly) ? 0x1FF : 0xFF);
+  }
+
+  return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function reads cache lines continuously using PRBS engine
+ *
+ *     @param[in,out] NBPtr  - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out] Buffer - Array of bytes to be filled with data read from DRAM
+ *     @param[in]     Address - System Address [47:16]
+ *     @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemRecNContReadPatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address,
+  IN       UINT16 ClCount
+  )
+{
+  MemRecNCommonReadWritePatternUnb (NBPtr, CMD_TYPE_READ, ClCount);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function generates a continuous stream of writes to DRAM using the
+ *       Unified Northbridge Reliable Read/Write Engine.
+ *
+ *     @param[in,out] NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out] Address - Unused by this function
+ *     @param[in]     Pattern - Unused by this function
+ *     @param[in]     ClCount - Number of cache lines to write
+ *
+ */
+
+VOID
+MemRecNContWritePatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[],
+  IN       UINT16 ClCount
+  )
+{
+  MemRecNCommonReadWritePatternUnb (NBPtr, CMD_TYPE_WRITE, ClCount);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function generates either read or write DRAM cycles for training
+ *     using PRBS engine
+ *
+ *     @param[in,out] NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]     CmdType - Read/Write
+ *     @param[in]     ClCount - Number of cache lines to write
+ *
+ */
+
+VOID
+STATIC
+MemRecNCommonReadWritePatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8  CmdType,
+  IN       UINT16 ClCount
+  )
+{
+  MEM_TECH_BLOCK *TechPtr;
+
+  TechPtr = NBPtr->TechPtr;
+
+  // Enable PRBS, also set ResetAllErr
+  MemRecNSetBitFieldNb (NBPtr, BFCmdTestEnable, 3);
+
+  // Send activate command
+  MemRecNSetBitFieldNb (NBPtr, BFDramCmd2Reg, (UINT32) 1 << (TechPtr->ChipSel + 22) | ((UINT32) 1 << 31));
+  MemRecUWait10ns (750, NBPtr->MemPtr);
+
+  // Setup test address
+  MemRecNSetBitFieldNb (NBPtr, BFTgtChipSelectA, TechPtr->ChipSel);
+  MemRecNSetBitFieldNb (NBPtr, BFDataPrbsSeed, PRBS_SEED_256);
+  MemRecNSetBitFieldNb (NBPtr, BFCmdCount, ClCount);
+
+  // Select read or write command
+  MemRecNSetBitFieldNb (NBPtr, BFCmdType, CmdType);
+
+  // Send command and wait for completion
+  MemRecNSetBitFieldNb (NBPtr, BFSendCmd, 1);
+  while (MemRecNGetBitFieldNb (NBPtr, BFTestStatus) == 0) {}
+  while (MemRecNGetBitFieldNb (NBPtr, BFCmdSendInProg) != 0) {}
+  MemRecNSetBitFieldNb (NBPtr, BFSendCmd, 0);
+
+  // Send precharge all command
+  MemRecNSetBitFieldNb (NBPtr, BFDramCmd2Reg, (UINT32) 1 << (TechPtr->ChipSel + 22) | ((UINT32) 1 << 30));
+  MemRecUWait10ns (750, NBPtr->MemPtr);
+
+  // Disable PRBS
+  MemRecNSetBitFieldNb (NBPtr, BFCmdTestEnable, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function checks the Error status bits for comparison results using PRBS
+ *
+ *     @param[in,out]   *NBPtr    - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       Buffer[]  -  Not used in this implementation
+ *     @param[in]       Pattern[] - Not used in this implementation
+ *     @param[in]       ByteCount - Not used in this implementation
+ *
+ *     @return  PASS - Bitmap of results of comparison
+ */
+
+UINT16
+MemRecNCompareTestPatternUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN       UINT16 ByteCount
+  )
+{
+  UINT16 i;
+  UINT16 Pass;
+  UINT32 NibbleErrSts;
+
+  NibbleErrSts = MemRecNGetBitFieldNb (NBPtr, BFNibbleErrSts);
+
+  Pass = 0;
+  for (i = 0; i < 8; i++) {
+    Pass |= ((NibbleErrSts & 0x03) > 0 ) ? (1 << i) : 0;
+    NibbleErrSts >>= 2;
+  }
+  Pass = ~Pass;
+  return Pass;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrnmct.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrnmct.c
new file mode 100644
index 0000000000..314c7f468b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrnmct.c
@@ -0,0 +1,296 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrnmct.c
+ *
+ * Northbridge Common MCT supporting functions Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/NB)
+ * @e \$Revision: 56555 $ @e \$Date: 2011-07-15 06:18:49 -0600 (Fri, 15 Jul 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuCacheInit.h"
+#include "Filecode.h"
+#define FILECODE PROC_RECOVERY_MEM_NB_MRNMCT_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function is the Recovery memory configuration function for Nb DDR3
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+
+AGESA_STATUS
+MemRecNMemInitNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  AGESA_STATUS Status;
+  MEM_TECH_BLOCK *TechPtr;
+
+  TechPtr = NBPtr->TechPtr;
+
+  NBPtr->MemRecNInitializeMctNb (NBPtr);
+
+  if (NBPtr->IsSupported[DramModeBeforeDimmPres]) {
+    TechPtr->SetDramMode (TechPtr);
+  }
+
+  Status = AGESA_FATAL;
+  if (TechPtr->DimmPresence (TechPtr)) {
+
+    if (NBPtr->IsSupported[DramModeAfterDimmPres]) {
+      TechPtr->SetDramMode (TechPtr);
+    }
+
+    if (MemRecNAutoConfigNb (NBPtr)) {
+
+      AGESA_TESTPOINT (TpProcMemPlatformSpecificConfig, &(NBPtr->MemPtr->StdHeader));
+      if (MemRecNPlatformSpecNb (NBPtr)) {
+        AgesaHookBeforeDramInitRecovery (0, NBPtr->MemPtr);
+        AGESA_TESTPOINT (TpProcMemStartDcts, &(NBPtr->MemPtr->StdHeader));
+        MemRecNStartupDCTNb (NBPtr);
+
+        AGESA_TESTPOINT (TpProcMemMtrrConfiguration, &(NBPtr->MemPtr->StdHeader));
+        MemRecNCPUMemRecTypingNb (NBPtr);
+
+        AGESA_TESTPOINT (TpProcMemDramTraining, &(NBPtr->MemPtr->StdHeader));
+        NBPtr->TrainingFlow (NBPtr);
+
+        Status = AGESA_SUCCESS;
+      }
+    }
+  }
+
+  NBPtr->MemRecNFinalizeMctNb (NBPtr);
+
+  return Status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function returns a physical address of a corresponding Chip select
+ *
+ *     @return      Addr -  System Address
+ */
+
+UINT32
+MemRecNGetMCTSysAddrNb ( VOID )
+{
+  UINT32 CSBase;
+
+  CSBase = (UINT32) 1 << 21;       // 1MB offset to avoid compat area from the base address.
+  if ((CSBase >= (MCT_TRNG_KEEPOUT_START << 8)) && (CSBase <= (MCT_TRNG_KEEPOUT_END << 8))) {
+    CSBase += (((MCT_TRNG_KEEPOUT_END << 8) - CSBase) + 0x0FFFFF) & 0xFFF00000;
+  }
+
+  return CSBase;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function runs on the BSP only, it sets the fixed MTRRs for common legacy ranges.
+ *   It sets TOP_MEM and TOM2 and some variable MTRRs with WB Uncacheable type.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemRecNCPUMemRecTypingNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  S_UINT64 SMsr;
+
+  MEM_DATA_STRUCT *MemPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  //
+  //======================================================================
+  // Set default values for CPU registers
+  //======================================================================
+  //
+
+  LibAmdMsrRead (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.lo |= 0x1C0000;                // turn on modification enable bit and
+                                      // mtrr enable bits
+  LibAmdMsrWrite (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  SMsr.lo = SMsr.hi = 0x1E1E1E1E;
+  LibAmdMsrWrite (0x250, (UINT64 *)&SMsr, &MemPtr->StdHeader);      // 0 - 512K = WB Mem
+  LibAmdMsrWrite (0x258, (UINT64 *)&SMsr, &MemPtr->StdHeader);      // 512K - 640K = WB Mem
+
+  LibAmdMsrRead (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.lo &= 0xFFF7FFFF;                // turn off modification enable bit
+  LibAmdMsrWrite (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  //
+  //======================================================================
+  // Set TOP_MEM and TOM2 CPU registers
+  //======================================================================
+  //
+  SMsr.hi = 0;
+  SMsr.lo = 0x08000000;
+  LibAmdMsrWrite (TOP_MEM, (UINT64 *)&SMsr, &MemPtr->StdHeader);  // TOP_MEM
+
+  // Set FS Base address for later memory accesses
+  SMsr.lo = 0;
+  LibAmdMsrWrite (FS_BASE, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+  //
+  //======================================================================
+  // Set variable MTRR values
+  //======================================================================
+  //
+  SMsr.lo = 0x00000006;
+  LibAmdMsrWrite (0x200, (UINT64 *)&SMsr, &MemPtr->StdHeader);      // MTRRPhysBase0
+
+  SMsr.hi = NBPtr->VarMtrrHiMsk;
+  SMsr.lo = 0xF8000800;
+  LibAmdMsrWrite (0x201, (UINT64 *)&SMsr, &MemPtr->StdHeader);      // MTRRPhysMask0
+
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function returns the upper 32 bits mask for variable MTRR based on
+ *     the CPU_LOGICAL_ID.
+ *     @param[in]       *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *     @param[in]       StdHeader - Header for library and services
+ *
+ *     @return          UINT32 - MTRR mask for upper 32 bits
+ *
+ */
+UINT32
+MemRecGetVarMtrrHiMsk (
+  IN       CPU_LOGICAL_ID *LogicalIdPtr,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 TempNotCare;
+  CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+  CACHE_INFO *CacheInfoPtr;
+
+  GetCpuServicesFromLogicalId (LogicalIdPtr, (CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+  FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &TempNotCare, StdHeader);
+  return (UINT32) (CacheInfoPtr->VariableMtrrMask >> 32);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ *     This function re-enable phy compensation.
+ *
+ *     @param[in,out]  *NBPtr     - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]  OptParam   - Optional parameter
+ *
+ *     @return    TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemRecNReEnablePhyCompNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN OUT   VOID *OptParam
+  )
+{
+  UINT8 Dct;
+
+  Dct = NBPtr->Dct;
+
+  NBPtr->SwitchDCT (NBPtr, 0);
+  // Clear DisableCal and set DisablePredriverCal
+  MemRecNSetBitFieldNb (NBPtr, BFDisablePredriverCal, 0x2000);
+  NBPtr->SwitchDCT (NBPtr, Dct);
+
+  return TRUE;
+}
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrntrain3.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrntrain3.c
new file mode 100644
index 0000000000..e102af4cf7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/NB/mrntrain3.c
@@ -0,0 +1,158 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrntrain3.c
+ *
+ * Common Recovery Northbridge function for training flow for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 49896 $ @e \$Date: 2011-03-30 02:18:18 -0600 (Wed, 30 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mrt3.h"
+#include "Filecode.h"
+#define FILECODE PROC_RECOVERY_MEM_NB_MRNTRAIN3_FILECODE
+/* features */
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets the training control flow
+ *      The DDR3 mode bit must be set prior to calling this function
+ *
+ *      @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNRecTrainingFlowNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemRecTTrainDQSWriteHw3 (NBPtr->TechPtr);
+
+  MemRecTTrainRcvrEnSw (NBPtr->TechPtr);
+
+  MemRecTTrainDQSPosSw (NBPtr->TechPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets the client training control flow
+ *
+ *      @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNRecTrainingFlowClientNb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart serial training\n");
+  IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", NBPtr->MCTPtr->DieId);
+
+  MemRecTTrainDQSWriteHw3 (NBPtr->TechPtr);
+
+  MemRecTTrainRcvrEnHw (NBPtr->TechPtr);
+
+  // Clear DisableCal and set DisablePredriverCal
+  NBPtr->FamilySpecificHook[ReEnablePhyComp] (NBPtr, NBPtr);
+  NBPtr->SetBitField (NBPtr, BFRxPtrInitReq, 1);
+  while (NBPtr->GetBitField (NBPtr, BFRxPtrInitReq) != 0) {}
+  NBPtr->SetBitField (NBPtr, BFDisDllShutdownSR, 1);
+  NBPtr->SetBitField (NBPtr, BFEnterSelfRef, 1);
+  while (NBPtr->GetBitField (NBPtr, BFEnterSelfRef) != 0) {}
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClkAlign = 2\n");
+  NBPtr->SetBitField (NBPtr, BFDbeGskMemClkAlignMode, 2);
+  NBPtr->SetBitField (NBPtr, BFExitSelfRef, 1);
+  while (NBPtr->GetBitField (NBPtr, BFExitSelfRef) != 0) {}
+  NBPtr->SetBitField (NBPtr, BFDisDllShutdownSR, 0);
+
+  MemRecTTrainDQSPosSw (NBPtr->TechPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *      This function sets the Unb training control flow
+ *
+ *      @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNRecTrainingFlowUnb (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  MemRecTTrainDQSWriteHw3 (NBPtr->TechPtr);
+
+  MemRecTTrainDQSPosSw (NBPtr->TechPtr);
+
+  MemRecTTrainRcvrEnHwSeedless (NBPtr->TechPtr);
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrp.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrp.c
new file mode 100644
index 0000000000..fe6006857b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrp.c
@@ -0,0 +1,258 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrp.c
+ *
+ * Common platform specific configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "ma.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_PS_MRP_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PSC_FLOW_BLOCK* memRecPlatSpecFlowArray[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function gets platform specific configuration such as Max Freq., Slow Mode, Dram Term,
+ *    and so on.
+ *
+ *     @param[in]       *NBPtr       Pointer to MEM_NB_BLOCK
+ *     @return          TRUE - Successfully execute platform specific configuration flow.
+ *     @return          FALSE - Fail to execute platform specific configuration flow.
+ *
+ */
+BOOLEAN
+MemPRecPSCFlow (
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 i;
+
+  i = 0;
+  while (memRecPlatSpecFlowArray[i] != NULL) {
+    if ((memRecPlatSpecFlowArray[i])->DramTerm (NBPtr, (memRecPlatSpecFlowArray[i])->EntryOfTables)) {
+      if ((memRecPlatSpecFlowArray[i])->ODTPattern (NBPtr, (memRecPlatSpecFlowArray[i])->EntryOfTables)) {
+        if ((memRecPlatSpecFlowArray[i])->SAO (NBPtr, (memRecPlatSpecFlowArray[i])->EntryOfTables)) {
+          if ((memRecPlatSpecFlowArray[i])->MR0WrCL (NBPtr, (memRecPlatSpecFlowArray[i])->EntryOfTables)) {
+            if ((memRecPlatSpecFlowArray[i])->RC2IBT (NBPtr, (memRecPlatSpecFlowArray[i])->EntryOfTables)) {
+              if ((memRecPlatSpecFlowArray[i])->RC10OpSpeed (NBPtr, (memRecPlatSpecFlowArray[i])->EntryOfTables)) {
+                if ((memRecPlatSpecFlowArray[i])->LRIBT (NBPtr, (memRecPlatSpecFlowArray[i])->EntryOfTables)) {
+                  if ((memRecPlatSpecFlowArray[i])->LRNPR (NBPtr, (memRecPlatSpecFlowArray[i])->EntryOfTables)) {
+                    if ((memRecPlatSpecFlowArray[i])->LRNLR (NBPtr, (memRecPlatSpecFlowArray[i])->EntryOfTables)) {
+                      return TRUE;
+                    }
+                  }
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+    i++;
+  }
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function constructs the rank type map of Dimm0, Dimm1, Dimm2. Also it counts the number
+ *     of dimm in the table.
+ *
+ *     @param[in]       Dimm0       Rank type of Dimm0
+ *     @param[in]       Dimm1       Rank type of Dimm1
+ *     @param[in]       Dimm2       Rank type of Dimm2
+ *     @param[in, out]       *RankTypeInTable       Pointer to RankTypeInTable variable
+ *
+ *
+ */
+VOID
+MemPRecConstructRankTypeMap (
+  IN       UINT16 Dimm0,
+  IN       UINT16 Dimm1,
+  IN       UINT16 Dimm2,
+  IN OUT   UINT16 *RankTypeInTable
+  )
+{
+  UINT8 i;
+  UINT16 RT;
+  UINT8 BitShift;
+
+  *RankTypeInTable = 0;
+  RT = 0;
+  BitShift = 0;
+
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+    switch (i) {
+    case 0:
+      RT = (Dimm0 == 0) ? NP : Dimm0;
+      BitShift = 0;
+      break;
+    case 1:
+      RT = (Dimm1 == 0) ? NP : Dimm1;
+      BitShift = 4;
+      break;
+    case 2:
+      RT = (Dimm2 == 0) ? NP : Dimm2;
+      BitShift = 8;
+      break;
+    default:
+      // dimm3 is not used, fills nibble3 with "NP"
+      RT = NP;
+      BitShift = 12;
+    }
+    *RankTypeInTable |= RT << BitShift;
+  }
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *     MemPIsIdSupported
+ *      This function matches the CPU_LOGICAL_ID and PackageType with certain criteria to
+ *      determine if it is supported by this NB type.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       LogicalId - CPU_LOGICAL_ID
+ *     @param[in]       PackageType - Package Type
+ *
+ *     @return          TRUE -  NB type is matched !
+ *     @return          FALSE - NB type is not matched !
+ *
+ */
+BOOLEAN
+MemPRecIsIdSupported (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       CPU_LOGICAL_ID LogicalId,
+  IN       UINT8 PackageType
+  )
+{
+  CPUID_DATA CpuId;
+  UINT8 PkgType;
+
+  LibAmdCpuidRead (AMD_CPUID_FMF, &CpuId, &(NBPtr->MemPtr->StdHeader));
+  PkgType = (UINT8) (CpuId.EBX_Reg >> 28) & 0xF; // bit 31:28
+
+  if (((NBPtr->MCTPtr->LogicalCpuid.Family & LogicalId.Family) != 0)
+      && ((NBPtr->MCTPtr->LogicalCpuid.Revision & LogicalId.Revision) != 0)) {
+    if ((PackageType == PT_DONT_CARE) || (PackageType == PkgType)) {
+      return TRUE;
+    }
+  }
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    This function returns the rank type map of a channel.
+ *
+ *     @param[in]       *CurrentChannel       Pointer to CH_DEF_STRUCT
+ *
+ *     @return          UINT16 - The map of rank type.
+ *
+ */
+UINT16
+MemPRecGetPsRankType (
+  IN       CH_DEF_STRUCT *CurrentChannel
+  )
+{
+  UINT8 i;
+  UINT16 DIMMRankType;
+
+  DIMMRankType = 0;
+  for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+    if ((CurrentChannel->DimmQrPresent & (UINT8) 1 << i) != 0) {
+      if (i < 2) {
+        DIMMRankType |= (UINT16) 8 << (i << 2);
+      }
+    } else if ((CurrentChannel->DimmDrPresent & (UINT8) 1 << i) != 0) {
+      DIMMRankType |= (UINT16) 4 << (i << 2);
+    } else if ((CurrentChannel->DimmSRPresent & (UINT8) 1 << i) != 0) {
+      DIMMRankType |= (UINT16) 2 << (i << 2);
+    } else {
+      DIMMRankType |= (UINT16) 1 << (i << 2);
+    }
+  }
+  return DIMMRankType;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrplribt.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrplribt.c
new file mode 100644
index 0000000000..eb930ffec7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrplribt.c
@@ -0,0 +1,182 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrplribt.c
+ *
+ * A sub-engine which extracts F0RC8, F1RC0, F1RC1 and F1RC2 value for LRDIMM configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mru.h"
+#include "ma.h"
+#include "mp.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_RECOVERY_MEM_PS_MRPLRIBT_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts LRDIMM F0RC8, F1RC0, F1RC1 and F1RC2 value from a input
+ *    table and stores extracted value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Succeed in extracting the table value
+ *     @return          FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPRecGetLRIBT (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 TableSize;
+  UINT8 DDR3Voltage;
+  UINT16 RankTypeOfPopulatedDimm;
+  UINT16 RankTypeInTable;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  PSCFG_L_IBT_ENTRY *TblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  //@todo LRDIMM
+  //if (CurrentChannel->LrDimmPresent == 0) {
+  //  return TRUE;
+  //}
+
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = RecGetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to NB type and package type.
+  while (EntryOfTables->TblEntryOfLRIBT[i] != NULL) {
+    if (((EntryOfTables->TblEntryOfLRIBT[i])->Header.NumOfDimm & NOD) != 0) {
+      LogicalCpuid = (EntryOfTables->TblEntryOfLRIBT[i])->Header.LogicalCpuid;
+      PackageType = (EntryOfTables->TblEntryOfLRIBT[i])->Header.PackageType;
+      //
+      // Determine if this is the expected NB Type
+      //
+      if (MemPRecIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+        TblPtr = (PSCFG_L_IBT_ENTRY *) ((EntryOfTables->TblEntryOfLRIBT[i])->TBLPtr);
+        TableSize = (EntryOfTables->TblEntryOfLRIBT[i])->TableSize;
+        break;
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfLRIBT[i] == NULL) {
+    return FALSE;
+  }
+
+  DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+  RankTypeOfPopulatedDimm = MemPRecGetPsRankType (CurrentChannel);
+
+  for (i = 0; i < TableSize; i++) {
+    MemPRecConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+    if (TblPtr->DimmPerCh == MaxDimmPerCh) {
+      if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+        if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+          NBPtr->PsPtr->F0RC8 = (UINT8) TblPtr->F0RC8;
+          NBPtr->PsPtr->F1RC0 = (UINT8) TblPtr->F1RC0;
+          NBPtr->PsPtr->F1RC1 = (UINT8) TblPtr->F1RC1;
+          NBPtr->PsPtr->F1RC2 = (UINT8) TblPtr->F1RC2;
+          break;
+        }
+      }
+    }
+    TblPtr++;
+  }
+  if (i == TableSize) {
+    return FALSE;
+  }
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrplrnlr.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrplrnlr.c
new file mode 100644
index 0000000000..da478396ae
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrplrnlr.c
@@ -0,0 +1,110 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrplrnlr.c
+ *
+ * A sub-engine which extracts F0RC13[NumLogicalRanks] value for LRDIMM configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mru.h"
+#include "ma.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_RECOVERY_MEM_PS_MRPLRNLR_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts LRDIMM F0RC13[NumLogicalRanks] value from a input
+ *    table and stores extracted value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Succeed in extracting the table value
+ *     @return          FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPRecGetLRNLR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  return TRUE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrplrnpr.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrplrnpr.c
new file mode 100644
index 0000000000..10d4b4f5d9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrplrnpr.c
@@ -0,0 +1,110 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrplrnpr.c
+ *
+ * A sub-engine which extracts F0RC13[NumPhysicalRanks] value for LRDIMM configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mru.h"
+#include "ma.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_RECOVERY_MEM_PS_MRPLRNPR_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts LRDIMM F0RC13[NumPhysicalRanks] value from a input
+ *    table and stores extracted value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Succeed in extracting the table value
+ *     @return          FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPRecGetLRNPR (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  return TRUE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrpmr0.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrpmr0.c
new file mode 100644
index 0000000000..4f851581ac
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrpmr0.c
@@ -0,0 +1,177 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpmr0.c
+ *
+ * A sub-engine which extracts MR0[WR] and MR0[CL] value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_PS_MRPMR0_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts MR0[WR] or MR0[CL] value from a input table and store the
+ *    value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Succeed in extracting the table value
+ *     @return          FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPRecGetMR0WrCL (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT8 j;
+  UINT8 p;
+  UINT32 Value32;
+  UINT8 TableSize;
+  PSCFG_TYPE Type;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  PSCFG_MR0CL_ENTRY *TblPtr;
+  PSC_TBL_ENTRY **ptr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+  TblPtr = NULL;
+  TableSize = 0;
+
+  // Extract MR0[WR] value, then MR0[CL] value
+  for (i = 0; i < 2; i++) {
+    if (i == 0) {
+      ptr = EntryOfTables->TblEntryOfMR0WR;
+      Type = PSCFG_MR0WR;
+    } else {
+      ptr = EntryOfTables->TblEntryOfMR0CL;
+      Type = PSCFG_MR0CL;
+    }
+
+    p = 0;
+    // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+    while (ptr[p] != NULL) {
+      //
+      // Determine if this is the expected NB Type
+      //
+      LogicalCpuid = (ptr[p])->Header.LogicalCpuid;
+      PackageType = (ptr[p])->Header.PackageType;
+      if (MemPRecIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+        TblPtr = (PSCFG_MR0CL_ENTRY *) ((ptr[p])->TBLPtr);
+        TableSize = (ptr[p])->TableSize;
+        break;
+      }
+      p++;
+    }
+
+    // Check whether no table entry is found.
+    if (ptr[p] == NULL) {
+      return FALSE;
+    }
+
+    Value32 = (Type == PSCFG_MR0WR) ? NBPtr->GetBitField (NBPtr, BFTwrDDR3) : NBPtr->GetBitField (NBPtr, BFTcl);
+
+    for (j = 0; j < TableSize; j++, TblPtr++) {
+      if (Value32 == (UINT32) TblPtr->Timing) {
+        if (Type == PSCFG_MR0WR) {
+          NBPtr->PsPtr->MR0WR = (UINT8) TblPtr->Value;
+          break;
+        } else {
+          NBPtr->PsPtr->MR0CL31 = (UINT8) TblPtr->Value;
+          NBPtr->PsPtr->MR0CL0 = (UINT8) TblPtr->Value1;
+          break;
+        }
+      }
+    }
+    if (j == TableSize) {
+      return FALSE;
+    }
+  }
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrpodtpat.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrpodtpat.c
new file mode 100644
index 0000000000..9b6b2f66cd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrpodtpat.c
@@ -0,0 +1,182 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrpodtpat.c
+ *
+ * A sub-engine which extracts ODT pattern value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mru.h"
+#include "ma.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_RECOVERY_MEM_PS_MRPODTPAT_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts ODT Pattern value from a input table and stores extracted
+ *    value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Table values can be extracted per dimm population and ranks type.
+ *     @return          FALSE - Table values cannot be extracted per dimm population and ranks type.
+ *
+ */
+BOOLEAN
+MemPRecGetODTPattern (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT16 RankTypeInTable;
+  UINT16 RankTypeOfPopulatedDimm;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 TableSize;
+  DIMM_TYPE DimmType;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  PSCFG_3D_ODTPAT_ENTRY *TblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = RecGetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  if (CurrentChannel->RegDimmPresent != 0) {
+    DimmType = RDIMM_TYPE;
+  } else if (CurrentChannel->SODimmPresent != 0) {
+    DimmType = SODIMM_TYPE;
+  //@todo LRDIMM
+  //} else if (CurrentChannel->LrDimmPresent) {
+  //  DimmType = LRDIMM_TYPE;
+  } else {
+    DimmType = UDIMM_TYPE;
+  }
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+  while (EntryOfTables->TblEntryOfODTPattern[i] != NULL) {
+    if (((EntryOfTables->TblEntryOfODTPattern[i])->Header.DimmType & DimmType) != 0) {
+      if (((EntryOfTables->TblEntryOfODTPattern[i])->Header.NumOfDimm & NOD) != 0) {
+        //
+        // Determine if this is the expected NB Type
+        //
+        LogicalCpuid = (EntryOfTables->TblEntryOfODTPattern[i])->Header.LogicalCpuid;
+        PackageType = (EntryOfTables->TblEntryOfODTPattern[i])->Header.PackageType;
+        if (MemPRecIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+          TblPtr = (PSCFG_3D_ODTPAT_ENTRY *) ((EntryOfTables->TblEntryOfODTPattern[i])->TBLPtr);
+          TableSize = (EntryOfTables->TblEntryOfODTPattern[i])->TableSize;
+          break;
+        }
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfODTPattern[i] == NULL) {
+    return FALSE;
+  }
+
+  RankTypeOfPopulatedDimm = MemPRecGetPsRankType (CurrentChannel);  //@todo - LRDIMM ?
+
+  for (i = 0; i < TableSize; i++) {
+    MemPRecConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+    if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+      CurrentChannel->PhyRODTCSHigh = TblPtr->RdODTCSHigh;
+      CurrentChannel->PhyRODTCSLow = TblPtr->RdODTCSLow;
+      CurrentChannel->PhyWODTCSHigh = TblPtr->WrODTCSHigh;
+      CurrentChannel->PhyWODTCSLow = TblPtr->WrODTCSLow;
+      return TRUE;
+    }
+    TblPtr++;
+  }
+  return FALSE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrprc10opspd.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrprc10opspd.c
new file mode 100644
index 0000000000..a9f254017a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrprc10opspd.c
@@ -0,0 +1,92 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrprc10opspd.c
+ *
+ * A sub-engine which extracts RC10 operating speed value for RDIMM configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mru.h"
+#include "ma.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_PS_MRPRC10OPSPD_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrprc2ibt.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrprc2ibt.c
new file mode 100644
index 0000000000..3206a057cb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrprc2ibt.c
@@ -0,0 +1,198 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrprc2ibt.c
+ *
+ * A sub-engine which extracts RC2[IBT] value for RDIMM configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mru.h"
+#include "ma.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_RECOVERY_MEM_PS_MRPRC2IBT_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts RC2[IBT] value from a input table and stores extracted
+ *    value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Table values can be extracted for all present dimms/ranks
+ *     @return          FALSE - Table values cannot be extracted for all present dimms/ranks
+ *
+ */
+BOOLEAN
+MemPRecGetRC2IBT (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 DimmIndex;
+  UINT8 TableSize;
+  UINT8 DDR3Voltage;
+  UINT16 RankTypeOfPopulatedDimm;
+  UINT16 RankTypeInTable;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  UINT8 TgtDimmType;
+  UINT8 NumOfReg;
+  PSCFG_MR2IBT_ENTRY *TblPtr;
+  PSCFG_MR2IBT_ENTRY *OrgTblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  if (CurrentChannel->RegDimmPresent == 0) {
+    return TRUE;
+  }
+
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  MaxDimmPerCh = RecGetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to NB type and package type.
+  while (EntryOfTables->TblEntryOfRC2IBT[i] != NULL) {
+    if (((EntryOfTables->TblEntryOfRC2IBT[i])->Header.NumOfDimm & NOD) != 0) {
+      LogicalCpuid = (EntryOfTables->TblEntryOfRC2IBT[i])->Header.LogicalCpuid;
+      PackageType = (EntryOfTables->TblEntryOfRC2IBT[i])->Header.PackageType;
+      //
+      // Determine if this is the expected NB Type
+      //
+      if (MemPRecIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+        TblPtr = (PSCFG_MR2IBT_ENTRY *) ((EntryOfTables->TblEntryOfRC2IBT[i])->TBLPtr);
+        TableSize = (EntryOfTables->TblEntryOfRC2IBT[i])->TableSize;
+        break;
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfRC2IBT[i] == NULL) {
+    return FALSE;
+  }
+
+  DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+  RankTypeOfPopulatedDimm = MemPRecGetPsRankType (CurrentChannel);
+
+  OrgTblPtr = TblPtr;
+  for (DimmIndex = 0; DimmIndex < MAX_DIMMS_PER_CHANNEL; DimmIndex++) {
+    TblPtr = OrgTblPtr;
+    if ((CurrentChannel->ChDimmValid& (UINT8) (1 << DimmIndex)) != 0) {
+      NumOfReg = CurrentChannel->CtrlWrd02[DimmIndex];
+      if ((CurrentChannel->DimmQrPresent & (UINT8) (1 << DimmIndex)) != 0) {
+        TgtDimmType = DIMM_QR;
+      } else if ((CurrentChannel->DimmDrPresent & (UINT8) (1 << DimmIndex)) != 0) {
+        TgtDimmType = DIMM_DR;
+      } else {
+        TgtDimmType = DIMM_SR;
+      }
+
+      for (i = 0; i < TableSize; i++) {
+        MemPRecConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+        if (TblPtr->DimmPerCh == MaxDimmPerCh) {
+          if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+            if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+              if ((TblPtr->Dimm & TgtDimmType) != 0) {
+                // If TblPtr->NumOfReg == 0x0F, that means the condition will be TRUE regardless of NumRegisters in DIMM
+                if ((TblPtr->NumOfReg == 0xF) || (TblPtr->NumOfReg == NumOfReg)) {
+                  CurrentChannel->CtrlWrd02[DimmIndex] = (UINT8) ((TblPtr->IBT & 0x1) << 2);
+                  CurrentChannel->CtrlWrd08[DimmIndex] = (UINT8) ((TblPtr->IBT & 0xE) >> 1);
+                  break;
+                }
+              }
+            }
+          }
+        }
+        TblPtr++;
+      }
+    }
+  }
+  return TRUE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrprtt.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrprtt.c
new file mode 100644
index 0000000000..6417debb8a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrprtt.c
@@ -0,0 +1,217 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrprtt.c
+ *
+ * A sub-engine which extracts RttNom and RttWr (Dram Term and Dynamic Dram Term) value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/Ps)
+ * @e \$Revision: 50607 $ @e \$Date: 2011-04-12 13:49:12 -0600 (Tue, 12 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mru.h"
+#include "ma.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_PS_MRPRTT_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts RttNom and RttWr value from a input table and stores extracted
+ *    value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Table values can be extracted for all present dimms/ranks
+ *     @return          FALSE - Table values cannot be extracted for all present dimms/ranks
+ *
+ */
+BOOLEAN
+MemPRecGetRttNomWr (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 TableSize;
+  UINT8 DDR3Voltage;
+  UINT16 RankTypeOfPopulatedDimm;
+  UINT16 RankTypeInTable;
+  DIMM_TYPE DimmType;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  UINT8 TgtDimmType;
+  UINT8 TgtRank;
+  UINT8 Chipsel;
+  PSCFG_RTT_ENTRY *TblPtr;
+  PSCFG_RTT_ENTRY *OrgTblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = RecGetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  if (CurrentChannel->RegDimmPresent != 0) {
+    DimmType = RDIMM_TYPE;
+  } else if (CurrentChannel->SODimmPresent != 0) {
+    DimmType = SODIMM_TYPE;
+  //@todo LRDIMM
+  //} else if (CurrentChannel->LrDimmPresent) {
+  //  DimmType = LRDIMM_TYPE;
+  } else {
+    DimmType = UDIMM_TYPE;
+  }
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+  while (EntryOfTables->TblEntryOfDramTerm[i] != NULL) {
+    if (((EntryOfTables->TblEntryOfDramTerm[i])->Header.DimmType & DimmType) != 0) {
+      if (((EntryOfTables->TblEntryOfDramTerm[i])->Header.NumOfDimm & NOD) != 0) {
+        //
+        // Determine if this is the expected NB Type
+        //
+        LogicalCpuid = (EntryOfTables->TblEntryOfDramTerm[i])->Header.LogicalCpuid;
+        PackageType = (EntryOfTables->TblEntryOfDramTerm[i])->Header.PackageType;
+        if (MemPRecIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+          TblPtr = (PSCFG_RTT_ENTRY *) ((EntryOfTables->TblEntryOfDramTerm[i])->TBLPtr);
+          TableSize = (EntryOfTables->TblEntryOfDramTerm[i])->TableSize;
+          break;
+        }
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfDramTerm[i] == NULL) {
+    return FALSE;
+  }
+
+  DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+  RankTypeOfPopulatedDimm = MemPRecGetPsRankType (CurrentChannel);  //@todo - LRDIMM ?
+
+  OrgTblPtr = TblPtr;
+  for (Chipsel = 0; Chipsel < MAX_CS_PER_CHANNEL; Chipsel++) {
+    TblPtr = OrgTblPtr;
+    if ((NBPtr->DCTPtr->Timings.CsPresent & (UINT16) (1 << Chipsel)) != 0) {
+      if ((CurrentChannel->DimmQrPresent & (UINT8) (1 << (Chipsel >> 1))) != 0) {
+        TgtDimmType = DIMM_QR;
+        TgtRank = (UINT8) ((Chipsel < 4) ? 1 << (Chipsel & 1) : 4 << (Chipsel & 1));
+      } else if ((CurrentChannel->DimmDrPresent & (UINT8) (1 << (Chipsel >> 1))) != 0) {
+        TgtDimmType = DIMM_DR;
+        TgtRank = (UINT8) 1 << (Chipsel & 1);
+      } else {
+        TgtDimmType = DIMM_SR;
+        TgtRank = (UINT8) 1 << (Chipsel & 1);
+      }
+
+      for (i = 0; i < TableSize; i++) {
+        MemPRecConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+        if (TblPtr->DimmPerCh == MaxDimmPerCh) {
+          if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+            if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+              if ((TblPtr->Dimm & TgtDimmType) != 0) {
+                if ((TblPtr->Rank & TgtRank) != 0) {
+                  NBPtr->PsPtr->RttNom[Chipsel] = (UINT8) TblPtr->RttNom;
+                  NBPtr->PsPtr->RttWr[Chipsel] = (UINT8) TblPtr->RttWr;
+                  break;
+                }
+              }
+            }
+          }
+        }
+        TblPtr++;
+      }
+      if (i == TableSize) {
+        return FALSE;
+      }
+    }
+  }
+
+  return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrpsao.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrpsao.c
new file mode 100644
index 0000000000..0f4c77adfc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Ps/mrpsao.c
@@ -0,0 +1,187 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrpsao.c
+ *
+ * A sub-engine which extracts Slow access mode, Address timing and Output driver compensation value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem/Ps)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mru.h"
+#include "ma.h"
+#include "mp.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_RECOVERY_MEM_PS_MRPSAO_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *    A sub-function which extracts Slow mode, Address timing and Output driver compensation value
+ *    from a input table and store those value to a specific address.
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in]       *EntryOfTables     - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ *     @return          TRUE - Table values can be extracted per dimm population and ranks type.
+ *     @return          FALSE - Table values cannot be extracted per dimm population and ranks type.
+ *
+ */
+BOOLEAN
+MemPRecGetSAO (
+  IN OUT   MEM_NB_BLOCK *NBPtr,
+  IN       MEM_PSC_TABLE_BLOCK *EntryOfTables
+  )
+{
+  UINT8 i;
+  UINT8 MaxDimmPerCh;
+  UINT8 NOD;
+  UINT8 TableSize;
+  UINT8 DDR3Voltage;
+  UINT16 RankTypeOfPopulatedDimm;
+  UINT16 RankTypeInTable;
+  DIMM_TYPE DimmType;
+  CPU_LOGICAL_ID LogicalCpuid;
+  UINT8 PackageType;
+  PSCFG_SAO_ENTRY *TblPtr;
+  CH_DEF_STRUCT *CurrentChannel;
+
+  CurrentChannel = NBPtr->ChannelPtr;
+
+  TblPtr = NULL;
+  TableSize = 0;
+  PackageType = 0;
+  LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+  MaxDimmPerCh = RecGetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+  NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+  if (CurrentChannel->RegDimmPresent != 0) {
+    DimmType = RDIMM_TYPE;
+  } else if (CurrentChannel->SODimmPresent != 0) {
+    DimmType = SODIMM_TYPE;
+  //@todo LRDIMM
+  //} else if (CurrentChannel->LrDimmPresent) {
+  //  DimmType = LRDIMM_TYPE;
+  } else {
+    DimmType = UDIMM_TYPE;
+  }
+
+  i = 0;
+  // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+  while (EntryOfTables->TblEntryOfSAO[i] != NULL) {
+    if (((EntryOfTables->TblEntryOfSAO[i])->Header.DimmType & DimmType) != 0) {
+      if (((EntryOfTables->TblEntryOfSAO[i])->Header.NumOfDimm & NOD) != 0) {
+        //
+        // Determine if this is the expected NB Type
+        //
+        LogicalCpuid = (EntryOfTables->TblEntryOfSAO[i])->Header.LogicalCpuid;
+        PackageType = (EntryOfTables->TblEntryOfSAO[i])->Header.PackageType;
+        if (MemPRecIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+          TblPtr = (PSCFG_SAO_ENTRY *) ((EntryOfTables->TblEntryOfSAO[i])->TBLPtr);
+          TableSize = (EntryOfTables->TblEntryOfSAO[i])->TableSize;
+          break;
+        }
+      }
+    }
+    i++;
+  }
+
+  // Check whether no table entry is found.
+  if (EntryOfTables->TblEntryOfSAO[i] == NULL) {
+    return FALSE;
+  }
+
+  DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+  RankTypeOfPopulatedDimm = MemPRecGetPsRankType (CurrentChannel);  //@todo - LRDIMM ?
+
+  for (i = 0; i < TableSize; i++) {
+    MemPRecConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+    if (TblPtr->DimmPerCh == MaxDimmPerCh) {
+      if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+        if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+          CurrentChannel->DctAddrTmg = TblPtr->AddTmgCtl;
+          CurrentChannel->DctOdcCtl = TblPtr->ODC;
+          CurrentChannel->SlowMode = (TblPtr->SlowMode == 1) ? TRUE : FALSE;
+          return TRUE;
+        }
+      }
+    }
+    TblPtr++;
+  }
+  return FALSE;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrt3.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrt3.c
new file mode 100644
index 0000000000..756b7be556
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrt3.c
@@ -0,0 +1,188 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrt3.c
+ *
+ * Common Technology  functions for DDR3  Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mrport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mrt3.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_TECH_DDR3_MRT3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function Constructs the technology block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemRecConstructTechBlock3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 Channel;
+  for (Dct = 0; Dct < NBPtr->MCTPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    for (Channel = 0; Channel < NBPtr->DCTPtr->ChannelCount; Channel++) {
+      NBPtr->SwitchChannel (NBPtr, Channel);
+      NBPtr->ChannelPtr->TechType = DDR3_TECHNOLOGY;
+    }
+  }
+
+  TechPtr->NBPtr = NBPtr;
+  TechPtr->RefPtr = NBPtr->RefPtr;
+
+  TechPtr->DramInit = MemRecTDramInitSw3;
+  TechPtr->SetDramMode = MemRecTSetDramMode3;
+  TechPtr->DimmPresence = MemRecTDIMMPresence3;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets the initial controller environment before training.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemRecTBeginTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  S_UINT64 SMsr;
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  LibAmdReadCpuReg (CR4_REG, &TechPtr->CR4reg);
+  LibAmdWriteCpuReg (CR4_REG, TechPtr->CR4reg | ((UINT32) 1 << 9)); // enable SSE2
+
+  LibAmdMsrRead (HWCR, (UINT64 *) (&SMsr), &MemPtr->StdHeader);            // HWCR
+  TechPtr->HwcrLo = SMsr.lo;
+  SMsr.lo |= 0x00020000;                  // turn on HWCR.wrap32dis
+  SMsr.lo &= 0xFFFF7FFF;                  // turn off HWCR.SSEDIS
+  LibAmdMsrWrite (HWCR, (UINT64 *) (&SMsr), &MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function sets the final controller environment after training.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemRecTEndTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  S_UINT64 SMsr;
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  LibAmdWriteCpuReg (CR4_REG, TechPtr->CR4reg);
+
+  LibAmdMsrRead (HWCR, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  SMsr.lo = TechPtr->HwcrLo;
+  LibAmdMsrWrite (HWCR, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+}
+
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtrci3.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtrci3.c
new file mode 100644
index 0000000000..ba5b4944ea
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtrci3.c
@@ -0,0 +1,243 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrtrci3.c
+ *
+ * Technology Control word initialization for DDR3 Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mru.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_TECH_DDR3_MRTRCI3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+UINT8
+STATIC
+MemRecTGetCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 CtrlWordNum
+  );
+
+VOID
+STATIC
+MemRecTSendCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 CmdNum,
+  IN       UINT8 Value
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends control words
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  pDCT->Timings.TrwtTO updated
+ */
+
+VOID
+MemRecTDramControlRegInit3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 RCNum;
+  UINT8 Data;
+
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  // wait 8us TACT must be changed to optimize to 8 MEM CLKs
+  // and wait 6us for PLL LOCK
+  MemRecUWait10ns (80 + 60, MemPtr);
+
+  // 2. Program F2x[1, 0]A8[CtrlWordCS]=bit mask for target chip selects.
+  NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (NBPtr->DimmToBeUsed << 1));
+
+  for (RCNum = 0; RCNum <= 15; RCNum++) {
+    // wait 8us for TMRD, must be changed to optimize to 8 MEM CLKs
+    MemRecUWait10ns (80, MemPtr);
+
+    if ((RCNum != 6) && (RCNum != 7)) {
+      Data = MemRecTGetCtlWord3 (TechPtr, RCNum);
+      MemRecTSendCtlWord3 (TechPtr, RCNum, Data);
+    }
+  }
+
+  MemRecUWait10ns (60, MemPtr);   // wait 6us for TSTAB
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the ControlRC value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]     CtrlWordNum  -  control Word number.
+ *
+ *     @return  Control Word value
+ */
+
+UINT8
+STATIC
+MemRecTGetCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 CtrlWordNum
+  )
+{
+  UINT8  Data;
+
+  CH_DEF_STRUCT *ChannelPtr;
+
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  Data = 0;  //Default value for all control words is 0
+  switch (CtrlWordNum) {
+  case 0:
+    Data = 0x02;  // DA4=1
+    break;
+  case 1:
+    Data = 0x0C;  // if single rank, set DBA1 and DBA0
+    break;
+  case 3:
+    Data = ChannelPtr->CtrlWrd03[TechPtr->NBPtr->DimmToBeUsed];
+    break;
+  case 4:
+    Data = ChannelPtr->CtrlWrd04[TechPtr->NBPtr->DimmToBeUsed];
+    break;
+  case 5:
+    Data = ChannelPtr->CtrlWrd05[TechPtr->NBPtr->DimmToBeUsed];
+    break;
+  case 9:
+    Data = 0x0D;
+    break;
+  default:;
+  }
+
+  return (Data&0x0F);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends control word command
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]     CmdNum  -  control number.
+ *     @param[in]     Value  -  value to send
+ *
+ */
+
+VOID
+STATIC
+MemRecTSendCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 CmdNum,
+  IN       UINT8 Value
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+
+  ASSERT (CmdNum < 16);
+  ASSERT (Value < 16);
+
+  NBPtr = TechPtr->NBPtr;
+
+  // 1. Program MrsBank and MrsAddress.
+  //    n = [BA2, A2, A1, A0].
+  //    data = [BA1, BA0, A4, A3].
+  //    Set all other bits in MrsAddress to zero.
+  //
+  NBPtr->SetBitField (NBPtr, BFMrsBank, ((CmdNum&8) >> 1) | (Value >> 2));
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, ((Value&3) << 3) | (CmdNum&7));
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCS%d RC%02d %04x\n",
+              (NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 20) & 0xF,
+              ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 15) & 8) |
+              (NBPtr->GetBitField (NBPtr, BFDramInitRegReg) & 7),
+              ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 14) & 0xC) |
+              ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 3) & 3));
+
+  // 2.Set SendCtrlWord=1
+  NBPtr->SetBitField (NBPtr, BFSendCtrlWord, 1);
+  // 3.Wait for BFSendCtrlWord=0
+  while (NBPtr->GetBitField (NBPtr, BFSendCtrlWord) != 0) {}
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtsdi3.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtsdi3.c
new file mode 100644
index 0000000000..9224d18d4d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtsdi3.c
@@ -0,0 +1,361 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrtsdi3.c
+ *
+ * Technology Software DRAM Init for DDR3 Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 49896 $ @e \$Date: 2011-03-30 02:18:18 -0600 (Wed, 30 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mru.h"
+#include "mt.h"
+#include "mrt3.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_TECH_DDR3_MRTSDI3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates software DRAM init
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemRecTDramInitSw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 ChipSel;
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Dram Init\n");
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tEnDramInit = 1 for DCT%d\n", NBPtr->Dct);
+  // 3.Program F2x[1,0]7C[EnDramInit]=1
+  NBPtr->SetBitField (NBPtr, BFEnDramInit, 1);
+
+  // 4.wait 200us
+  MemRecUWait10ns (20000, MemPtr);
+
+  NBPtr->SetBitField (NBPtr, BFDeassertMemRstX, 1);
+
+  // 6.wait 500us
+  MemRecUWait10ns (50000, MemPtr);
+
+  // 7.NOP or deselect & take CKE high
+  NBPtr->SetBitField (NBPtr, BFAssertCke, 1);
+
+  // 8.wait 360ns
+  MemRecUWait10ns (36, MemPtr);
+
+  // The following steps are performed with registered DIMMs only and
+  // must be done for each chip select pair:
+  //
+  if (NBPtr->ChannelPtr->RegDimmPresent != 0) {
+    MemRecTDramControlRegInit3 (TechPtr);
+  }
+
+  for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+    if ((NBPtr->DCTPtr->Timings.CsPresent & (UINT16) 1 << ChipSel) != 0) {
+
+      // Set Dram ODT per ChipSel
+      NBPtr->SetDramOdtRec (NBPtr, MISSION_MODE, ChipSel, (NBPtr->DimmToBeUsed << 1));
+
+      NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+      // 13.Send EMRS(2)
+      MemRecTEMRS23 (TechPtr);
+      NBPtr->SendMrsCmd (NBPtr);
+
+      // 14.Send EMRS(3). Ordinarily at this time, MrsAddress[2:0]=000b
+      MemRecTEMRS33 (TechPtr);
+      NBPtr->SendMrsCmd (NBPtr);
+
+      // 15.Send EMRS(1).
+      MemRecTEMRS13 (TechPtr);
+      NBPtr->SendMrsCmd (NBPtr);
+
+      // 16.Send MRS with MrsAddress[8]=1(reset the DLL)
+      MemRecTMRS3 (TechPtr);
+      NBPtr->SendMrsCmd (NBPtr);
+
+      //wait 500us
+      MemRecUWait10ns (50000, MemPtr);
+
+      if (NBPtr->ChannelPtr->RegDimmPresent == 0) {
+        break;
+      }
+    }
+  }
+
+  // 17.Send two ZQCL commands (to even then odd chip select)
+  NBPtr->sendZQCmd (NBPtr);
+  NBPtr->sendZQCmd (NBPtr);
+
+  // 18.Program F2x[1,0]7C[EnDramInit]=0
+  NBPtr->SetBitField (NBPtr, BFEnDramInit, 0);
+  IDS_HDT_CONSOLE (MEM_FLOW, "End Dram Init\n\n");
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the EMRS1 value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemRecTEMRS13 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT16 MrsAddress;
+  UINT8 DramTerm;
+
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // BA2=0,BA1=0,BA0=1
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 1);
+
+  MrsAddress = 0;
+
+  // program MrsAddress[5,1]=output driver impedance control (DIC):
+  // based on F2x[1,0]84[DrvImpCtrl], which is 2'b01
+  MrsAddress |= ((UINT16) 1 << 1);
+
+  // program MrsAddress[9,6,2]=nominal termination resistance of ODT (RTT):
+  // based on F2x[1,0]84[DramTerm], which is 3'b001 (60 Ohms)
+  if (!(NBPtr->IsSupported[CheckDramTerm])) {
+    DramTerm = (UINT8) NBPtr->GetBitField (NBPtr, BFDramTerm);
+  } else {
+    DramTerm = NBPtr->PsPtr->DramTerm;
+  }
+  if ((DramTerm & 1) != 0) {
+    MrsAddress |= ((UINT16) 1 << 2);
+  }
+  if ((DramTerm & 2) != 0) {
+    MrsAddress |= ((UINT16) 1 << 6);
+  }
+  if ((DramTerm & 4) != 0) {
+    MrsAddress |= ((UINT16) 1 << 9);
+  }
+
+  // program MrsAddress[12]=output disable (QOFF):
+  // based on F2x[1,0]84[Qoff], which is 1'b0
+
+  // program MrsAddress[11]=TDQS:
+  // based on F2x[1,0]94[RDqsEn], which is 1'b0
+
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the EMRS2 value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemRecTEMRS23 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT16 MrsAddress;
+  UINT8 DramTermDyn;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // BA2=0,BA1=1,BA0=0
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 2);
+
+  // program MrsAddress[5:3]=CAS write latency (CWL):
+  // based on F2x[1,0]84[Tcwl], which is 3'b000
+  //
+  MrsAddress = 0;
+
+  // program MrsAddress[6]=auto self refresh method (ASR):
+  // based on F2x[1,0]84[ASR], which is 1'b1
+  // program MrsAddress[7]=self refresh temperature range (SRT):
+  // based on F2x[1,0]84[SRT], which is also 1'b0
+  //
+  MrsAddress |= (UINT16) 1 << 6;
+
+  // program MrsAddress[10:9]=dynamic termination during writes (RTT_WR):
+  // based on F2x[1,0]84[DramTermDyn]
+  //
+  if (!(NBPtr->IsSupported[CheckDramTermDyn])) {
+    DramTermDyn = (UINT8) NBPtr->GetBitField (NBPtr, BFDramTermDyn);
+  } else {
+    DramTermDyn = NBPtr->PsPtr->DynamicDramTerm;
+  }
+  MrsAddress |= (UINT16) DramTermDyn << 9;
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the EMRS3 value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemRecTEMRS33 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // BA2=0,BA1=1,BA0=1
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 3);
+
+  // program MrsAddress[1:0]=multi purpose register address location
+  // (MPR Location):based on F2x[1,0]84[MprLoc], which is 0
+  // program MrsAddress[2]=multi purpose register
+  // (MPR):based on F2x[1,0]84[MprEn], which is also 0
+  //
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This sets MSS value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemRecTMRS3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT16 MrsAddress;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // BA2=0,BA1=0,BA0=0
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 0);
+
+  // program MrsAddress[1:0]=burst length and control method
+  // (BL):based on F2x[1,0]84[BurstCtrl], which is 1'b0
+  //
+  MrsAddress = 0;
+
+  // program MrsAddress[3]=1 (BT):interleaved
+  MrsAddress |= (UINT16) 1 << 3;
+
+  // program MrsAddress[6:4,2]=read CAS latency
+  // (CL):based on F2x[1,0]88[Tcl], which is 4'b0010
+  MrsAddress |= (UINT16) 2 << 4;
+
+  // program MrsAddress[11:9]=write recovery for auto-precharge
+  // (WR):based on F2x[1,0]84[Twr], which is 3'b010
+  //
+  MrsAddress |= (UINT16) 2 << 9;
+
+  // program MrsAddress[12]=0 (PPD):slow exit
+
+  // program MrsAddress[8]=1 (DLL):DLL reset
+  MrsAddress |= (UINT16) 1 << 8;   // just issue DLL reset at first time
+
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtspd3.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtspd3.c
new file mode 100644
index 0000000000..f656a530bb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtspd3.c
@@ -0,0 +1,325 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrtspd3.c
+ *
+ * Technology SPD supporting functions for DDR3 Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mrtspd3.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_TECH_DDR3_MRTSPD3_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define _UNDEF_ 0xFF
+#define MAX_DIES_PER_SOCKET     2   ///< Set to largest of any CPU
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the DRAM mode
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - indicates that the DRAM mode is set to DDR2
+ */
+
+BOOLEAN
+MemRecTSetDramMode3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFLegacyBiosMode, 0);
+  TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFDdr3Mode, 1);
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function determines if DIMMs are present. It checks checksum and interrogates the SPDs
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - indicates that a FATAL error has not occurred
+ *     @return  FALL - indicates that a FATAL error has not occurred
+ */
+
+BOOLEAN
+MemRecTDIMMPresence3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 Node;
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 i;
+  SPD_DEF_STRUCT *SPDPtr;
+  UINT8 *SpdBufferPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  MEM_NB_BLOCK *NBPtr;
+  UINT16 MaxDimms;
+  UINT16 Value16;
+  UINT8 Devwidth;
+  UINT8 Value8;
+  UINT16 DimmMask;
+  UINT8 VoltageMap;
+  UINT8 VDDByte;
+  UINT32 V1_2XDimmMap;
+  UINT32 V1_35DimmMap;
+  UINT32 V1_5DimmMap;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  VoltageMap = 0xFF;
+  V1_2XDimmMap = 0;
+  V1_35DimmMap = 0;
+  V1_5DimmMap = 0;
+
+  NBPtr->DimmToBeUsed = _UNDEF_;
+  for (Node = 0; Node < NBPtr->MemPtr->DieCount; Node++) {
+    NBPtr->SwitchNodeRec (NBPtr, Node);
+    for (Dct = 0; Dct < NBPtr->MCTPtr->DctCount; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      DCTPtr = NBPtr->DCTPtr;
+      for (Channel = 0; Channel < DCTPtr->ChannelCount; Channel++) {
+        NBPtr->SwitchChannel (NBPtr, Channel);
+        ChannelPtr = NBPtr->ChannelPtr;
+        SPDPtr = NBPtr->SPDPtr;
+
+        // Get the maximum number of DIMMs
+        MaxDimms = MAX_DIMMS_PER_CHANNEL;
+        for (i = 0; i < MaxDimms; i++) {
+          //  Bitmask representing dimm #i.
+          DimmMask = (UINT16) 1 << i;
+
+          if (SPDPtr[i].DimmPresent) {
+            SpdBufferPtr = (UINT8 *)&(SPDPtr[i].Data);
+
+            MCTPtr->DimmPresent |= DimmMask;
+            if (SpdBufferPtr[SPD_TYPE] == JED_DDR3SDRAM) {
+              ChannelPtr->ChDimmValid |= DimmMask;
+            }
+
+            //  Check module type information.
+            if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_RDIMM || SpdBufferPtr[SPD_DIMM_TYPE] == JED_MINIRDIMM) {
+              ChannelPtr->RegDimmPresent |= DimmMask;
+            }
+
+            if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_SODIMM) {
+              ChannelPtr->SODimmPresent |= DimmMask;
+            }
+
+            //  Get the Dimm width data
+            Devwidth = SpdBufferPtr[SPD_DEV_WIDTH] & 0x7;
+            switch (Devwidth) {
+            case 0:
+              ChannelPtr->Dimmx4Present |= DimmMask;
+              Devwidth = 4;
+              break;
+            case 1:
+              ChannelPtr->Dimmx8Present |= DimmMask;
+              Devwidth = 8;
+              break;
+            case 2:
+              ChannelPtr->Dimmx16Present |= DimmMask;
+              Devwidth = 16;
+              break;
+            default:
+              IDS_ERROR_TRAP;
+            }
+
+            //  Determine the page size.
+            //       page_size = 2^COLBITS * Devwidth/8
+            //
+            Value16 = (((UINT16) 1 << (SpdBufferPtr[SPD_COL_SZ]&7)) * Devwidth) / 8;
+            if ((Value16 >> 11) == 0) {
+              DCTPtr->Timings.DIMM1KPage |= DimmMask;
+            }
+
+            //  Calculate bus loading per Channel
+            if (Devwidth == 16) {
+              Devwidth = 4;
+            } else if (Devwidth == 4) {
+              Devwidth = 16;
+            }
+
+            //  specify the number of ranks
+            Value8 = ((SpdBufferPtr[SPD_RANKS] >> 3) & 0x07) + 1;
+            if (Value8 > 2) {
+              ChannelPtr->DimmQrPresent |= DimmMask;
+              Devwidth = Devwidth << 2;
+            } else if (Value8 == 2) {
+              ChannelPtr->DimmDrPresent |= DimmMask;   //  Dual rank dimms
+              Devwidth = Devwidth << 1;
+            } else {
+              ChannelPtr->DimmSRPresent |= DimmMask;
+            }
+
+            ChannelPtr->Ranks = ChannelPtr->Ranks + Value8;
+            ChannelPtr->Loads = ChannelPtr->Loads + Devwidth;
+            ChannelPtr->Dimms++;
+
+            // Check address mirror support for Unbuffered Dimms only
+            if ((ChannelPtr->RegDimmPresent & DimmMask) == 0) {
+              if ((SpdBufferPtr[SPD_ADDRMAP] & 1) != 0) {
+                ChannelPtr->DimmMirrorPresent |= DimmMask;
+              }
+            }
+
+            // Get control word values for RC3, RC4 and RC5
+            ChannelPtr->CtrlWrd03[i] = SpdBufferPtr[SPD_CTLWRD03] >> 4;
+            ChannelPtr->CtrlWrd04[i] = SpdBufferPtr[SPD_CTLWRD04] & 0x0F;
+            ChannelPtr->CtrlWrd05[i] = SpdBufferPtr[SPD_CTLWRD05] >> 4;
+            //
+            // Temporarily store info. of SPD byte 63 into CtrlWrd02(s),
+            // and they will be used late to calculate real RC2 and RC8 value
+            //
+            ChannelPtr->CtrlWrd02[i] = SpdBufferPtr[SPD_ADDRMAP] & 0x03;
+
+            // Get the common voltage if possible and create the individual Dimm maps per voltage
+            VDDByte = SpdBufferPtr[SPD_MNVVDD];
+            VDDByte ^= 1;
+            VoltageMap &= VDDByte;
+            //
+            // Create the Dimms map
+            //
+            // Node:            1         0
+            // Dct:          1    0    1    0
+            // Dimm:       3210 3210 3210 3210
+            // Dimmbitmap: xxxx xxxx xxxx xxxx
+            // Ex.         0000 0001 0010 0000 (V1_2XDimmMap)
+            //             This indicates Node0/Dct1/Dimm1 and Node1/Dct0/Dimm0 are 1.2XV supported.
+            if ((VDDByte & (UINT8) (1 << VOLT1_25)) != 0) {
+              V1_2XDimmMap |= (UINT32) DimmMask << ((Node * NBPtr->MCTPtr->DctCount + Dct) * MAX_DIMMS_PER_CHANNEL);
+            } else if ((VDDByte & (UINT8) (1 << VOLT1_35)) != 0) {
+              V1_35DimmMap |= (UINT32) DimmMask << ((Node * NBPtr->MCTPtr->DctCount + Dct) * MAX_DIMMS_PER_CHANNEL);
+            } else {
+              V1_5DimmMap |= (UINT32) DimmMask << ((Node * NBPtr->MCTPtr->DctCount + Dct) * MAX_DIMMS_PER_CHANNEL);
+            }
+          } // if DIMM present
+        } // Dimm loop
+      } // Channel loop
+    } // DCT loop
+  }
+
+  if (VoltageMap != 0xFF) {
+    if (VoltageMap == 0) {
+      NBPtr->RefPtr->DDR3Voltage = VOLT1_35;
+      if (V1_35DimmMap != 0) {
+        i = (UINT8) LibAmdBitScanForward (V1_35DimmMap);
+      } else {
+        i = (UINT8) LibAmdBitScanForward (V1_2XDimmMap);
+      }
+    } else {
+      NBPtr->RefPtr->DDR3Voltage = CONVERT_ENCODED_TO_VDDIO (LibAmdBitScanReverse (VoltageMap));
+      i = (UINT8) LibAmdBitScanForward (V1_2XDimmMap | V1_35DimmMap | V1_5DimmMap);
+      // In case of 1.35V Dimms and 1.5V Dimms mixture, we initialize the 1.35V Dimm.
+      if ((V1_35DimmMap != 0) && (V1_5DimmMap != 0)) {
+        NBPtr->RefPtr->DDR3Voltage = VOLT1_35;
+        i = (UINT8) LibAmdBitScanForward (V1_35DimmMap);
+      }
+    }
+    // Find out which Dimm we are going to initialize and which Node/Dct it belongs to
+    NBPtr->DimmToBeUsed = i % MAX_DIMMS_PER_CHANNEL;
+    Node = i / (NBPtr->MCTPtr->DctCount * MAX_DIMMS_PER_CHANNEL);
+    Dct = (i / MAX_DIMMS_PER_CHANNEL) & (NBPtr->MCTPtr->DctCount - 1);
+    NBPtr->SwitchNodeRec (NBPtr, Node);
+    NBPtr->SwitchDCT (NBPtr, Dct);
+  }
+
+  //  If we have DIMMs, some further general characteristics checking
+  if (NBPtr->DimmToBeUsed == _UNDEF_) {
+    //  Leave with an error - no dimms on this DCT
+    // LibAmdEventLog (AGESA_FATAL, MEM_ERROR_NO_DIMM_FOUND, 0, NBPtr->Dct, NBPtr->Channel, 0);   //@attention commented out since it is not defined in recovery code
+    SetMemRecError (AGESA_FATAL, MCTPtr);
+  }
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtspd3.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtspd3.h
new file mode 100644
index 0000000000..24dccee13b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtspd3.h
@@ -0,0 +1,131 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrtspd3.h
+ *
+ * Technology SPD support for DDR3 Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTSPD3_H_
+#define _MTSPD3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*===============================================================================
+ *   Jedec DDR III
+ *===============================================================================
+ */
+#define SPD_BYTE_USED     0
+#define SPD_TYPE          2              /* SPD byte read location */
+#define JED_DDR_SDRAM     7              /* Jedec defined bit field */
+#define JED_DDR2_SDRAM    8              /* Jedec defined bit field */
+#define JED_DDR3SDRAM   0xB              /* Jedec defined bit field */
+
+#define SPD_DIMM_TYPE    3
+#define SPD_ATTRIB      21
+#define JED_DIF_CK_MSK    0x20            /* Differential Clock Input */
+#define JED_RDIMM       1
+#define JED_MINIRDIMM   5
+#define JED_UDIMM       2
+#define JED_SODIMM       3
+
+#define SPD_L_BANKS      4               /* [7:4] number of [logical] banks on each device */
+#define SPD_DENSITY     4               /* bit 3:0 */
+#define SPD_ROW_SZ       5               /* bit 5:3 */
+#define SPD_COL_SZ       5               /* bit 2:0 */
+#define SPD_MNVVDD    6
+#define SPD_RANKS       7               /* bit 5:3 */
+#define SPD_DEV_WIDTH    7               /* bit 2:0 */
+#define SPD_ECCBITS     8               /* bit 4:3 */
+#define JED_ECC         8
+#define SPD_RAWCARD     62              /* bit 2:0 */
+#define SPD_ADDRMAP     63              /* bit 0 */
+
+#define SPD_CTLWRD03     70              /* bit 7:4 */
+#define SPD_CTLWRD04     71              /* bit 3:0 */
+#define SPD_CTLWRD05     71              /* bit 7:4 */
+
+#define SPD_DIVIDENT    10
+#define SPD_DIVISOR     11
+
+#define SPD_TCK         12
+#define SPD_CASLO       14
+#define SPD_CASHI       15
+#define SPD_TAA         16
+
+#define SPD_TRP         20
+#define SPD_TRRD        19
+#define SPD_TRCD        18
+#define SPD_TRAS        22
+#define SPD_TWR         17
+#define SPD_TWTR        26
+#define SPD_TRTP        27
+#define SPD_TRC         23
+#define SPD_UPPER_TRC   21              /* bit 7:4 */
+#define SPD_UPPER_TRAS  21              /* bit 3:0 */
+#define SPD_TFAW        29
+#define SPD_UPPER_TFAW  28              /* bit 3:0 */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#endif  /* _MTSPD3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrttwl3.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrttwl3.c
new file mode 100644
index 0000000000..f2ceb2cbb6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrttwl3.c
@@ -0,0 +1,369 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrttwl3.c
+ *
+ * Technology Phy assisted write levelization for recovery DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 50454 $ @e \$Date: 2011-04-10 21:20:37 -0600 (Sun, 10 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mru.h"
+#include "mt.h"
+#include "mrt3.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_TECH_DDR3_MRTTWL3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_BYTELANES 8             /* Max Bytelanes per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecTPrepareDIMMs3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       BOOLEAN Wl
+  );
+
+VOID
+STATIC
+MemRecTProcConfig3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+STATIC
+MemRecTBeginWLTrain3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executed hardware based write levelization for a specific die
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemRecTTrainDQSWriteHw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart write leveling\n");
+  //  Disable auto refresh by configuring F2x[1, 0]8C[DisAutoRefresh] = 1.
+  NBPtr->SetBitField (NBPtr, BFDisAutoRefresh, 1);
+  //  Disable ZQ calibration short command by configuring F2x[1, 0]94[ZqcsInterval] = 00b.
+  NBPtr->SetBitField (NBPtr, BFZqcsInterval, 0);
+
+  // 1. Specify the target Dimm that is to be trained by programming
+  //     F2x[1, 0]9C_x08[TrDimmSel].
+  IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", NBPtr->DimmToBeUsed << 1);
+  NBPtr->SetBitField (NBPtr, BFTrDimmSel, NBPtr->DimmToBeUsed);
+
+  // 2. Prepare the DIMMs for write levelization using DDR3-defined
+  // MR commands.
+  MemRecTPrepareDIMMs3 (TechPtr, TRUE);
+
+  // 3. After the DIMMs are configured, BIOS waits 40 MEMCLKs to
+  //     satisfy DDR3-defined internal DRAM timing.
+  MemRecUWait10ns (10, NBPtr->MemPtr);
+
+  // 4. Configure the processor's DDR phy for write levelization training:
+  MemRecTProcConfig3 (TechPtr);
+
+  // 5. Begin write levelization training
+  MemRecTBeginWLTrain3 (TechPtr);
+
+  // 6. Configure DRAM Phy Control Register so that the phy stops driving write levelization ODT.
+  // Program WrLvOdtEn=0
+  NBPtr->SetBitField (NBPtr, BFWrLvOdtEn, 0);
+
+  // Wait 10 MEMCLKs to allow for ODT signal settling.
+  MemRecUWait10ns (3, NBPtr->MemPtr);
+
+  // 7. Program the target Dimm back to normal operation
+  MemRecTPrepareDIMMs3 (TechPtr, FALSE);
+
+  //  13.Program F2x[1, 0]8C[DisAutoRefresh] = 0.
+  NBPtr->SetBitField (NBPtr, BFDisAutoRefresh, 0);
+  //  14.Program F2x[1, 0]94[ZqcsInterval] to the proper interval for the current memory configuration.
+  NBPtr->SetBitField (NBPtr, BFZqcsInterval, 2);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "End write leveling\n\n");
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function prepares the DIMMS for Write Levelization
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in] Wl - Indicates if WL mode should be enabled
+ *
+ */
+
+VOID
+STATIC
+MemRecTPrepareDIMMs3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       BOOLEAN Wl
+  )
+{
+  UINT8 ChipSel;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  AGESA_TESTPOINT (TpProcMemWlPrepDimms, &(NBPtr->MemPtr->StdHeader));
+
+  for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+    // Set Dram ODT based on current mode.
+    if ((NBPtr->DCTPtr->Timings.CsPresent & (UINT16) 1 << ChipSel) != 0) {
+      if (Wl) {
+        NBPtr->SetDramOdtRec (NBPtr, WRITE_LEVELING_MODE, ChipSel, (NBPtr->DimmToBeUsed << 1));
+      } else {
+        NBPtr->SetDramOdtRec (NBPtr, MISSION_MODE, ChipSel, (NBPtr->DimmToBeUsed << 1));
+      }
+
+      NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+
+      // Set MR1 to F2x7C[MrsAddress], F2x7C[MrsBank]=1
+      MemRecTEMRS13 (TechPtr);
+      // Program Level
+      if (Wl) {
+        if ((ChipSel >> 1) == NBPtr->DimmToBeUsed) {
+          NBPtr->SetBitField (NBPtr, BFLevel, 1);
+          if (ChipSel & 1) {
+            NBPtr->SetBitField (NBPtr, BFMrsQoff, 1);
+          }
+        }
+      }
+      // Send command
+      NBPtr->SendMrsCmd (NBPtr);
+
+      // Set MR2 to F2x7C[MrsAddress], F2x7C[MrsBank]=1
+      MemRecTEMRS23 (TechPtr);
+      // Send command
+      NBPtr->SendMrsCmd (NBPtr);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function configures the DIMMS for Write Levelization
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemRecTProcConfig3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT8 ByteLane;
+  UINT8 *Seed;
+  UINT8 DefaultSeed;
+  UINT8 CurrentSeed;
+  UINT8 Dimm;
+
+  NBPtr = TechPtr->NBPtr;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  Dimm = NBPtr->DimmToBeUsed;
+
+  // Program WrLvOdtEn=1
+  NBPtr->SetBitField (NBPtr, BFWrLvOdtEn, 1);
+
+  // Wait 10 MEMCLKs to allow for ODT signal settling.
+  MemRecUWait10ns (3, NBPtr->MemPtr);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSeeds: ");
+  //  Program an initialization Value to registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 to set
+  //  the gross and fine delay for all the byte lane fields. If the target frequency is different than 400MHz,
+  //  BIOS must execute two training passes for each Dimm. For pass 1 at a 400MHz MEMCLK frequency,
+  //  use an initial total delay Value of 01Fh. This represents a 1UI (UI=.5MEMCLK) delay and is determined
+  //  by design.
+
+  //  Get default seed
+  if (ChannelPtr->RegDimmPresent != 0) {
+    DefaultSeed = 0x41;
+  } else if (ChannelPtr->SODimmPresent != 0) {
+    DefaultSeed = 0x12;
+  } else {
+    DefaultSeed = 0x1A;
+  }
+
+  //  Get platform override seed
+  Seed = (UINT8 *) MemRecFindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_WL_SEED, NBPtr->MCTPtr->SocketId, ChannelPtr->ChannelID, Dimm);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "Seeds: ");
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    // This includes ECC as byte 8
+    CurrentSeed = ((Seed != NULL) ? Seed[ByteLane] : DefaultSeed);
+    NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), CurrentSeed);
+    ChannelPtr->WrDqsDlys[Dimm * MAX_BYTELANES + ByteLane] = CurrentSeed;
+    IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", CurrentSeed);
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+
+  // Program F2x[1, 0]9C_x08[WrtLvTrMode]=0 for phy assisted training.
+
+  // Program F2x[1, 0]9C_x08[TrNibbleSel]=0
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function begins WL training for a specific DIMM
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemRecTBeginWLTrain3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK *NBPtr;
+  UINT8 ByteLane;
+  UINT8 Seed;
+  UINT8 Delay;
+  UINT8 Dimm;
+
+  NBPtr = TechPtr->NBPtr;
+
+  Dimm = NBPtr->DimmToBeUsed;
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrtLvTrEn = 1\n");
+  // Program F2x[1, 0]9C_x08[WrtLlTrEn]=1.
+  NBPtr->SetBitField (NBPtr, BFWrtLvTrEn, 1);
+
+  //  Wait 200 MEMCLKs. If executing pass 2, wait 32 MEMCLKs.
+  MemRecUWait10ns (50, NBPtr->MemPtr);
+
+  //  Program F2x[1, 0]9C_x08[WrtLlTrEn]=0.
+  NBPtr->SetBitField (NBPtr, BFWrtLvTrEn, 0);
+
+  //  Read from registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 to get the gross and fine Delay settings
+  //   for the target Dimm and save these values.
+  IDS_HDT_CONSOLE (MEM_FLOW, " PRE WrDqs\n");
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    // This includes ECC as byte 8
+    Seed = NBPtr->ChannelPtr->WrDqsDlys[(Dimm * MAX_BYTELANES) + ByteLane];
+    Delay = (UINT8)NBPtr->GetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane));
+    IDS_HDT_CONSOLE (MEM_FLOW, "  %02x ", Delay);
+    if (((Seed >> 5) == 0) && ((Delay >> 5) == 3)) {
+
+      // If seed has gross delay of 0 and PRE has gross delay of 3,
+      // then round the total delay of TxDqs to 0.
+      Delay = 0;
+    }
+
+    NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), Delay);
+    NBPtr->ChannelPtr->WrDqsDlys[(Dimm * MAX_BYTELANES) + ByteLane] = Delay;
+    IDS_HDT_CONSOLE (MEM_FLOW, "  %02x\n", Delay);
+  }
+
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tWrDqs: ");
+    for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", NBPtr->ChannelPtr->WrDqsDlys[ByteLane]);
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+  );
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrtthrc.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrtthrc.c
new file mode 100644
index 0000000000..84e7ab6f46
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrtthrc.c
@@ -0,0 +1,329 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrtthrc.c
+ *
+ * Phy assisted DQS receiver enable training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 50454 $ @e \$Date: 2011-04-10 21:20:37 -0600 (Sun, 10 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mru.h"
+#include "mt.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_TECH_MRTTHRC_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_BYTELANES 8             /* Max Bytelanes per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecTPrepareRcvrEnDlySeed (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  );
+
+UINT16
+STATIC
+MemRecTProgramRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes Phy assisted receiver enable training for current node.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @pre   Auto refresh and ZQCL must be disabled
+ *
+ */
+VOID
+MemRecTTrainRcvrEnHw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8  TempBuffer[64];
+  UINT8  Count;
+  UINT32 TestAddr;
+  UINT8  ChipSel;
+  UINT16 MaxRcvrDly;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  AGESA_TESTPOINT (TpProcMemReceiverEnableTraining , &(NBPtr->MemPtr->StdHeader));
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart HW RxEn training\n");
+
+  // Set environment settings before training
+  MemRecTBeginTraining (TechPtr);
+
+  ChipSel = NBPtr->DimmToBeUsed << 1;
+  TestAddr = 1 << 21;
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", TechPtr->NBPtr->Dct);
+  IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tTestAddr %x\n", TestAddr);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t     Byte:  00  01  02  03  04  05  06  07  ECC\n");
+
+  // 1.Prepare the DIMMs for training
+  NBPtr->SetBitField (NBPtr, BFTrDimmSel, ChipSel >> 1);
+
+  // 2.Prepare the phy for DQS receiver enable training.
+  MemRecTPrepareRcvrEnDlySeed (TechPtr, ChipSel);
+
+  // 3.BIOS initiates the phy assisted receiver enable training
+  NBPtr->SetBitField (NBPtr, BFDqsRcvTrEn, 1);
+
+  // 4.BIOS begins sending out of back-to-back reads to create
+  //   a continuous stream of DQS edges on the DDR interface.
+  for (Count = 0; Count < 3; Count++) {
+    NBPtr->ReadPattern (NBPtr, TempBuffer, TestAddr, 64);
+  }
+
+  // 6.Wait 200 MEMCLKs.
+  MemRecUWait10ns (200, NBPtr->MemPtr);
+
+  // 7.Program [DqsRcvTrEn]=0 to stop the DQS receive enable training.
+  NBPtr->SetBitField (NBPtr, BFDqsRcvTrEn, 0);
+
+  // 8.Get the gross and fine delay values.
+  // 9.Calculate the corresponding final delay values
+  MaxRcvrDly = MemRecTProgramRcvrEnDly (TechPtr, ChipSel);
+
+  // Set Max Latency for both channels
+  NBPtr->SetMaxLatency (NBPtr, MaxRcvrDly);
+
+  // Restore environment settings after training
+  MemRecTEndTraining (TechPtr);
+  IDS_HDT_CONSOLE (MEM_FLOW, "End HW RxEn training\n\n");
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function calculates RcvEn seed value for each rank
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]  ChipSel - rank to be trained
+ *
+ */
+VOID
+STATIC
+MemRecTPrepareRcvrEnDlySeed (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT16 SeedTotal;
+  UINT16 SeedFine;
+  UINT16 SeedGross;
+  UINT16 SeedPreGross;
+  UINT16 DiffSeedGrossSeedPreGross;
+  UINT8  ByteLane;
+  UINT16 PlatEst;
+  UINT16 *PlatEstSeed;
+  UINT16 SeedValue[8];
+  UINT16 SeedTtl[8];
+  UINT16 SeedPre[8];
+
+  NBPtr = TechPtr->NBPtr;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  // Get platform override seed
+  PlatEstSeed = (UINT16 *) MemRecFindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_RXEN_SEED, NBPtr->MCTPtr->SocketId, ChannelPtr->ChannelID, ChipSel >> 1);
+
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    // For Pass1, BIOS starts with the delay value obtained from the first pass of write
+    // levelization training that was done in DDR3 Training and add a delay value of 3Bh.
+    PlatEst = 0x3B;
+    NBPtr->FamilySpecificHook[OverrideRcvEnSeed] (NBPtr, &PlatEst);
+    PlatEst = ((PlatEstSeed != NULL) ? PlatEstSeed[ByteLane] : PlatEst);
+    SeedTotal = ChannelPtr->WrDqsDlys[((ChipSel >> 1) * MAX_BYTELANES) + ByteLane] + PlatEst;
+    SeedValue[ByteLane] = PlatEst;
+    SeedTtl[ByteLane] = SeedTotal;
+    // SeedGross = SeedTotal DIV 32.
+    SeedGross = SeedTotal >> 5;
+    // SeedFine = SeedTotal MOD 32.
+    SeedFine = SeedTotal & 0x1F;
+
+    // Next, determine the gross component of SeedTotal. SeedGrossPass1=SeedTotal DIV 32.
+    // Then, determine the fine delay component of SeedTotal. SeedFinePass1=SeedTotal MOD 32.
+    // Use SeedGrossPass1 to determine SeedPreGrossPass1:
+
+    if ((SeedGross & 0x1) != 0) {
+      //if SeedGross is odd
+      SeedPreGross = 1;
+    } else {
+      //if SeedGross is even
+      SeedPreGross = 2;
+    }
+
+    // (SeedGross - SeedPreGross)
+    DiffSeedGrossSeedPreGross = SeedGross - SeedPreGross;
+
+    ChannelPtr->RcvEnDlys[(ChipSel * MAX_BYTELANES) + ByteLane] =  DiffSeedGrossSeedPreGross << 5;
+
+    //BIOS programs registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52) with SeedPreGrossPass1
+    //and SeedFinePass1 from the preceding steps.
+    NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (ChipSel >> 1, ByteLane), (SeedPreGross << 5) | SeedFine);
+    SeedPre[ByteLane] = (SeedPreGross << 5) | SeedFine;
+
+    // 202688: Program seed value to RcvEnDly also.
+    NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (ChipSel >> 1, ByteLane), SeedGross << 5);
+  }
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+   IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSeedValue: ");
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", SeedValue[ByteLane]);
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSeedTotal: ");
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", SeedTtl[ByteLane]);
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t  SeedPRE: ");
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", SeedPre[ByteLane]);
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+  );
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function calculates final RcvrEnDly for each rank
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]  ChipSel - Rank to be trained
+ *
+ *     @return   MaxDly - The largest delay value
+ *
+ */
+UINT16
+STATIC
+MemRecTProgramRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT16 DiffSeedGrossSeedPreGross;
+  UINT8  ByteLane;
+  UINT16 RcvEnDly;
+  UINT16 MaxDly;
+  UINT16 RankRcvEnDly[8];
+  NBPtr = TechPtr->NBPtr;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t      PRE: ");
+  MaxDly = 0;
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    DiffSeedGrossSeedPreGross = (ChannelPtr->RcvEnDlys[(ChipSel * MAX_BYTELANES) + ByteLane]) & 0x1E0;
+    RcvEnDly = (UINT8) NBPtr->GetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (ChipSel >> 1, ByteLane));
+    IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RcvEnDly);
+
+    RcvEnDly = RcvEnDly + DiffSeedGrossSeedPreGross;
+
+    // Add 1 UI to get to the midpoint of preamble
+    RcvEnDly += 0x20;
+    RankRcvEnDly[ByteLane] = RcvEnDly;
+
+    if (RcvEnDly > MaxDly) {
+      MaxDly = RcvEnDly;
+    }
+
+    NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS ((ChipSel >> 1), ByteLane), RcvEnDly);
+  }
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+   IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t     RxEn: ");
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RankRcvEnDly[ByteLane]);
+  }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+  );
+  return MaxDly;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrtthrcSeedTrain.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrtthrcSeedTrain.c
new file mode 100644
index 0000000000..2e0f1a475d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrtthrcSeedTrain.c
@@ -0,0 +1,315 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrtthrcSeedTrain.c
+ *
+ * Phy assisted DQS receiver enable training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 03:16:51 -0600 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mru.h"
+#include "mt.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_TECH_MRTTHRCSEEDTRAIN_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_BYTELANES 8             /* Max Bytelanes per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecTPrepareRcvrEnDlySeed (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  );
+
+UINT16
+STATIC
+MemRecTProgramRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *     This function executes Phy assisted receiver enable training without
+ *     needing a correct seed.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @pre   Auto refresh and ZQCL must be disabled
+ *
+ */
+VOID
+MemRecTTrainRcvrEnHwSeedless (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8  TempBuffer[64];
+  UINT8  Count;
+  UINT32 TestAddrRJ16;
+  UINT8  ChipSel;
+  UINT16 MaxRcvrDly;
+  UINT8  PassMask;
+  UINT8  PrevTest;
+  UINT8  CurTest;
+  UINT8  ByteLane;
+  UINT32 OrgReg;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart HW RxEn training\n");
+  AGESA_TESTPOINT (TpProcMemReceiverEnableTraining , &(NBPtr->MemPtr->StdHeader));
+
+  //  Disable auto refresh by configuring F2x[1, 0]8C[DisAutoRefresh] = 1.
+  NBPtr->SetBitField (NBPtr, BFDisAutoRefresh, 1);
+  //  Disable ZQ calibration short command by configuring F2x[1, 0]94[ZqcsInterval] = 00b.
+  NBPtr->SetBitField (NBPtr, BFZqcsInterval, 0);
+
+  // Set environment settings before training
+  MemRecTBeginTraining (TechPtr);
+
+  ChipSel = NBPtr->DimmToBeUsed << 1;
+  TechPtr->ChipSel = ChipSel;
+  TestAddrRJ16 = 1 << 21;
+
+  // 1.Prepare the DIMMs for training
+  NBPtr->SetBitField (NBPtr, BFTrDimmSel, ChipSel >> 1);
+
+  // 2.Prepare the phy for DQS receiver enable training.
+  MemRecTPrepareRcvrEnDlySeed (TechPtr, ChipSel);
+
+  // 3.BIOS initiates the phy assisted receiver enable training
+  NBPtr->SetBitField (NBPtr, BFDqsRcvTrEn, 1);
+
+  // 4.BIOS begins sending out of back-to-back reads to create
+  //   a continuous stream of DQS edges on the DDR interface.
+  for (Count = 0; Count < 3; Count++) {
+    NBPtr->ReadPattern (NBPtr, TempBuffer, TestAddrRJ16, 64);
+  }
+
+  // 6.Wait 200 MEMCLKs.
+  MemRecUWait10ns (200, NBPtr->MemPtr);
+
+  // 7.Program [DqsRcvTrEn]=0 to stop the DQS receive enable training.
+  NBPtr->SetBitField (NBPtr, BFDqsRcvTrEn, 0);
+
+  // 8.Get the gross and fine delay values.
+  // 9.Calculate the corresponding final delay values
+  MaxRcvrDly = MemRecTProgramRcvrEnDly (TechPtr, ChipSel);
+
+  //
+  // SEEDLESS TRAINING
+  // Sweep RxEn even gross delays to find the correct RxEn delays
+  //
+  OrgReg = MemRecNGetBitFieldNb (NBPtr, BFBlockRxDqsLock);
+  NBPtr->SetBitField (NBPtr, BFBlockRxDqsLock, OrgReg | 0x0100);
+  PassMask = 0;
+  PrevTest = 0;
+
+  // Use 3 CL pattern since recovery mode uses conservative settings and is not expected to work with long burst
+  NBPtr->WritePattern (NBPtr, TestAddrRJ16, TempBuffer, 3);
+
+  while (PassMask != 0xFF) {
+    NBPtr->SetMaxLatency (NBPtr, MaxRcvrDly);
+    NBPtr->ReadPattern (NBPtr, TempBuffer, TestAddrRJ16, 3);
+    CurTest = (UINT8) NBPtr->CompareTestPattern (NBPtr, TempBuffer, TempBuffer, 3);
+
+    // Mark pass when transition from P to F
+    PassMask |= (PrevTest & (~CurTest));
+
+    for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "  %02x", TechPtr->RcvrEnDlyOpt[ByteLane]);
+      if ((CurTest & (1 << ByteLane)) == 0) {
+        IDS_HDT_CONSOLE (MEM_FLOW, " .\n");
+      } else {
+        IDS_HDT_CONSOLE (MEM_FLOW, " P\n");
+      }
+      if ((PassMask & (1 << ByteLane)) == 0) {
+        // For byte lanes that has not passed, increase by 2 UIs
+        TechPtr->RcvrEnDlyOpt[ByteLane] += 0x40;
+        NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS ((ChipSel >> 1), ByteLane), TechPtr->RcvrEnDlyOpt[ByteLane]);
+        if (TechPtr->RcvrEnDlyOpt[ByteLane] > MaxRcvrDly) {
+          MaxRcvrDly = TechPtr->RcvrEnDlyOpt[ByteLane];
+        }
+      } else {
+        // For byte lanes that has passed, decrease 5/2 UI to get back to the middle of preamble
+        NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS ((ChipSel >> 1), ByteLane), TechPtr->RcvrEnDlyOpt[ByteLane] - 0x50);
+      }
+    }
+    PrevTest = CurTest;
+  }
+  NBPtr->SetBitField (NBPtr, BFBlockRxDqsLock, OrgReg);
+
+  // Set final MaxRdLat
+  NBPtr->SetMaxLatency (NBPtr, MaxRcvrDly - 0x50);
+
+  // Restore environment settings after training
+  MemRecTEndTraining (TechPtr);
+  //  13.Program F2x[1, 0]8C[DisAutoRefresh] = 0.
+  NBPtr->SetBitField (NBPtr, BFDisAutoRefresh, 0);
+  //  14.Program F2x[1, 0]94[ZqcsInterval] to the proper interval for the current memory configuration.
+  NBPtr->SetBitField (NBPtr, BFZqcsInterval, 2);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "End HW RxEn training\n\n");
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function calculates RcvEn seed value for each rank
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]  ChipSel - rank to be trained
+ *
+ */
+VOID
+STATIC
+MemRecTPrepareRcvrEnDlySeed (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  UINT8  ByteLane;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // Program a seed of 0x20 to make the result falls in (0,40) range
+  IDS_HDT_CONSOLE (MEM_FLOW, "Seeds: 20\n");
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (ChipSel >> 1, ByteLane), 0x20);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function calculates final RcvrEnDly for each rank
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]  ChipSel - Rank to be trained
+ *
+ *     @return   MaxDly - The largest delay value
+ *
+ */
+UINT16
+STATIC
+MemRecTProgramRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT8  ByteLane;
+  UINT16 RcvEnDly;
+  UINT16 MaxDly;
+
+  NBPtr = TechPtr->NBPtr;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+  MaxDly = 0;
+  IDS_HDT_CONSOLE (MEM_FLOW, " PRE RxEn\n");
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    // Read PRE
+    RcvEnDly = (UINT8) NBPtr->GetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (ChipSel >> 1, ByteLane));
+    IDS_HDT_CONSOLE (MEM_FLOW, "  %02x ", RcvEnDly);
+
+    // Add 1 UI to get to the midpoint of preamble
+    RcvEnDly += 0x20;
+
+    // And add 1/2 UI to start seedless training
+    RcvEnDly += 0x10;
+
+    // Record Max RxEn for MaxRdLat calculation
+    if (RcvEnDly > MaxDly) {
+      MaxDly = RcvEnDly;
+    }
+
+    // Write RxEn delays
+    NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS ((ChipSel >> 1), ByteLane), RcvEnDly);
+    TechPtr->RcvrEnDlyOpt[ByteLane] = RcvEnDly;
+    IDS_HDT_CONSOLE (MEM_FLOW, "  %02x\n", RcvEnDly);
+  }
+
+  return MaxDly;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrttpos.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrttpos.c
new file mode 100644
index 0000000000..7f53991b49
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrttpos.c
@@ -0,0 +1,114 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttpos.c
+ *
+ * Technology DQS R/W position training. Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_TECH_MRTTPOS_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function hard-codes DQS position delays for all bytes
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemRecTTrainDQSPosSw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  //Hard Code Settings
+  MemRecTSetWrDatRdDqs (TechPtr, 0x0F);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrttsrc.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrttsrc.c
new file mode 100644
index 0000000000..2594ecbec9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/mrttsrc.c
@@ -0,0 +1,437 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrttsrc.c
+ *
+ * Technology Software based DQS receiver enable training Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 52180 $ @e \$Date: 2011-05-03 05:17:25 -0600 (Tue, 03 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mru.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_TECH_MRTTSRC_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_BYTELANES 8             /* Max Bytelanes per channel */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+VOID
+STATIC
+MemRecTSetRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly
+  );
+
+VOID
+STATIC
+MemRecTLoadRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver
+  );
+
+BOOLEAN
+STATIC
+MemRecTSaveRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly,
+  IN       UINT8 CmpResult
+  );
+
+UINT8
+STATIC
+MemRecTCompare1ClPattern (
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes receiver enable training for BSP
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemRecTTrainRcvrEnSw (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  _16BYTE_ALIGN  UINT8  PatternBuffer[3 * 64];
+  UINT8  TestBuffer[120];
+  UINT8  *PatternBufPtr[2];
+  UINT32 TestAddr[4];
+  UINT8  TestResult;
+  UINT8 Receiver;
+  UINT8 i;
+  UINT8 j;
+  UINT16 RcvrEnDly;
+
+  MEM_DATA_STRUCT *MemPtr;
+  DIE_STRUCT *MCTPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  AGESA_TESTPOINT (TpProcMemReceiverEnableTraining, &(MemPtr->StdHeader));
+
+  // Set environment settings before training
+  MemRecTBeginTraining (TechPtr);
+
+  PatternBufPtr[0] = PatternBuffer;
+  MemRecUFillTrainPattern (TestPattern0, PatternBufPtr[0], 64, &(MemPtr->StdHeader));
+  PatternBufPtr[1] = PatternBufPtr[0] + 128;
+  MemRecUFillTrainPattern (TestPattern1, PatternBufPtr[1], 64, &(MemPtr->StdHeader));
+
+  // Begin receiver enable training
+  MemRecTSetWrDatRdDqs (TechPtr, 0);
+
+  // there are four receiver pairs, loosely associated with chipselects.
+  Receiver = NBPtr->DimmToBeUsed << 1;
+  TechPtr->DqsRcvEnSaved = 0;
+
+  TestAddr[0] = NBPtr->GetSysAddrRec ();
+  TestAddr[1] = TestAddr[0] + BIGPAGE_X8;
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tDct %d\n", NBPtr->Dct);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCS %d\n", Receiver);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrite to addresses:  %04x0000\n", TestAddr[0]);
+
+  // Sweep receiver enable delays
+  AGESA_TESTPOINT (TpProcMemRcvrStartSweep, &(MemPtr->StdHeader));
+  for (RcvrEnDly = 0; RcvrEnDly < 0xFF; RcvrEnDly++) {
+
+    TestResult = 0xFF;
+    for (i = 0; i < 2; i++) {
+
+      // Set RcvrEn delay for all byte lanes
+      AGESA_TESTPOINT (TpProcMemRcvrSetDelay, &(MemPtr->StdHeader));
+      MemRecTSetRcvrEnDly (TechPtr, Receiver, RcvrEnDly);
+      IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDly %3x", RcvrEnDly);
+
+      // Swap the test pointers such that even and odd steps alternate.
+      j = ((RcvrEnDly & 1) != 0) ? (i ^ 1) : i;
+
+      // Write, read and compare the first beat of data
+      AGESA_TESTPOINT (TpProcMemRcvrWritePattern, &(MemPtr->StdHeader));
+      MemRecUWrite1CL (TestAddr[j], PatternBufPtr[j]);
+      AGESA_TESTPOINT (TpProcMemRcvrReadPattern, &(MemPtr->StdHeader));
+      MemRecURead1CL (TestBuffer, TestAddr[j]);
+      AGESA_TESTPOINT (TpProcMemRcvrTestPattern, &(MemPtr->StdHeader));
+      TestResult &= MemRecTCompare1ClPattern (TestBuffer, PatternBufPtr[j], &(MemPtr->StdHeader));
+      MemRecUProcIOClFlush (TestAddr[j], MemPtr);
+    }
+
+    if (MemRecTSaveRcvrEnDly (TechPtr, Receiver, RcvrEnDly, TestResult)) {
+      // if all bytelanes pass
+      break;
+    }
+  }   // End of delay sweep
+
+  if (RcvrEnDly == 0xFF) {
+    // no passing window
+    // LibAmdEventLog (AGESA_ERROR, MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW, 0, NBPtr->Dct, NBPtr->Channel, 0);   //@attention commented out since it is not defined in recovery code
+    SetMemRecError (AGESA_ERROR, MCTPtr);
+  }
+
+  // set final delays
+  MemRecTLoadRcvrEnDly (TechPtr, Receiver);
+
+  // Clear training bit when done
+  NBPtr->SetBitField (NBPtr, BFDqsRcvEnTrain, 0);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMaxRcvrEnDly: %03x\n", RcvrEnDly + 0x20);
+
+  // Set Max Latency for both channels
+  NBPtr->SetMaxLatency (NBPtr, RcvrEnDly + 0x20);
+
+  // Restore environment settings after training
+  MemRecTEndTraining (TechPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      If WrDatDly is 0, this function sets the DQS Positions in preparation
+ *      for Receiver Enable Training. (Write Position is no delay, Read Position is 1.5 Memclock delay).
+ *      Otherwise it will set WrDat and RdDqs to center of data eye.
+ *
+ *     @param[in,out]   *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       WrDatDly - either 0 or 0x0F
+ *
+ */
+
+VOID
+MemRecTSetWrDatRdDqs (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 WrDatDly
+  )
+{
+  UINT8 ByteLane;
+  UINT8 Dimm;
+  UINT8 WrDqs;
+  UINT8 RdDqs;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  Dimm = NBPtr->DimmToBeUsed;
+  IDS_HDT_CONSOLE (MEM_FLOW, "\nWrDat RdDqs\n");
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    WrDqs = NBPtr->ChannelPtr->WrDqsDlys[(Dimm * MAX_BYTELANES) + ByteLane];
+    NBPtr->SetTrainDly (NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqs + WrDatDly);
+    RdDqs = (WrDatDly == 0) ? 0x2F : 0x012;
+    NBPtr->SetTrainDly (NBPtr, AccessRdDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), RdDqs);
+    IDS_HDT_CONSOLE (MEM_FLOW, "  %02x  %02x\n\n", WrDqs + WrDatDly, RdDqs);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function programs DqsRcvEnDly to additional index for DQS receiver enabled training
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver  - Current Chip select value
+ *     @param[in]       RcvEnDly  - receiver enable delay to be saved
+ *
+ */
+
+VOID
+STATIC
+MemRecTSetRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly
+  )
+{
+  UINT8 ByteLane;
+
+  ASSERT (Receiver <= MAX_CS_PER_CHANNEL);
+  for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+    TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver >> 1, ByteLane), RcvEnDly);
+  }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function compares test pattern with data in buffer and return a pass/fail bitmap
+ *       for 8 Bytes
+ *
+ *     @param[in]       Buffer[]  -  Buffer data from DRAM (Measured data from DRAM) to compare
+ *     @param[in]       Pattern[]  - Pattern (Expected data in ROM/CACHE) to compare against
+ *     @param[in,out] StdHeader - The Pointer of AGESA Header.
+ *
+ *     @return  PASS - Bit map of results of comparison
+ */
+
+UINT8
+STATIC
+MemRecTCompare1ClPattern (
+  IN       UINT8 Buffer[],
+  IN       UINT8 Pattern[],
+  IN OUT   AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  UINT8 i;
+  UINT8 Pass;
+
+  Pass = 0xFF;
+  IDS_HDT_CONSOLE (MEM_FLOW, " -");
+  for (i = 0; i < 8; i++) {
+    if (Buffer[i] != Pattern[i]) {
+      // if bytelane n fails
+      Pass &= ~((UINT16) 1 << (i % 8));    // clear bit n
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "  %c", (Buffer[i] == Pattern[i]) ? 'P' : '.');
+  }
+
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t        -");
+    for (i = 0; i < 8; i++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, " %02x", Buffer[i]);
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t        -");
+    for (i = 0; i < 8; i++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, " %02x", Pattern[i]);
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+  );
+
+  return Pass;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function saves passing DqsRcvEnDly values to the stack
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver  - Current Chip select value
+ *     @param[in]       RcvEnDly  - receiver enable delay to be saved
+ *     @param[in]       CmpResult - compare result for Rank 0
+ *
+ *     @return  TRUE - All bytelanes pass
+ *     @return  FALSE - Some bytelanes fail
+ */
+
+BOOLEAN
+STATIC
+MemRecTSaveRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver,
+  IN       UINT16 RcvEnDly,
+  IN       UINT8 CmpResult
+  )
+{
+  UINT8 i;
+  UINT8 Passed;
+  UINT8 Saved;
+  UINT8 Mask;
+  UINT8 Dimm;
+
+  ASSERT (Receiver <= MAX_CS_PER_CHANNEL);
+
+  Passed = CmpResult;
+  Saved = (UINT8) (TechPtr->DqsRcvEnSaved & Passed); //@todo - false passes filter (subject to be replaced with a better solution)
+  Dimm = Receiver >> 1;
+  Mask = 1;
+  for (i = 0; i < 8; i++) {
+    if ((Passed & Mask) != 0) {
+      if ((Saved & Mask) == 0) {
+        TechPtr->NBPtr->ChannelPtr->RcvEnDlys[Dimm * MAX_BYTELANES + i] = (UINT8) (RcvEnDly + 0x20);
+        IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tBL %d = %02x", i, RcvEnDly + 0x20);
+      }
+      Saved |= Mask;
+    }
+    Mask <<= 1;
+  }
+  TechPtr->DqsRcvEnSaved = Saved;
+
+  if (Saved == 0xFF) {
+    return TRUE;
+  } else {
+    return FALSE;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function loads the DqsRcvEnDly from saved data and program to additional index
+ *  for DQS receiver enabled training
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       Receiver  - Current Chip select value
+ *
+ */
+
+VOID
+STATIC
+MemRecTLoadRcvrEnDly (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Receiver
+  )
+{
+  UINT8 i;
+  UINT8 Dimm;
+  UINT16 Saved;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  ASSERT (Receiver <= MAX_CS_PER_CHANNEL);
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  Dimm = Receiver >> 1;
+  Saved = TechPtr->DqsRcvEnSaved;
+  for (i = 0; i < 8; i++) {
+    if ((Saved & 1) != 0) {
+      TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver >> 1, i),
+      ChannelPtr->RcvEnDlys[Dimm * MAX_BYTELANES + i]);
+    }
+    Saved >>= 1;
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrdef.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrdef.c
new file mode 100644
index 0000000000..7d270ec0f9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrdef.c
@@ -0,0 +1,128 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mdef.c
+ *
+ * Memory Controller header file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 52180 $ @e \$Date: 2011-05-03 05:17:25 -0600 (Tue, 03 May 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_MRDEF_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *         This is the default return function
+ */
+
+VOID
+MemRecDefRet ( VOID )
+{
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function is the default return function that returns TRUE
+ *
+ */
+BOOLEAN
+MemRecDefTrue ( VOID )
+{
+  return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function programs the DCT with initial values
+ *
+ *
+ *     @param[in,out]   *MCTPtr  - Pointer to the DIE_STRUCT
+ *     @param[in]       Errorval - Error value
+ */
+
+VOID
+SetMemRecError (
+  IN       AGESA_STATUS  Errorval,
+  IN OUT   DIE_STRUCT *MCTPtr
+  )
+{
+  if (MCTPtr->ErrCode < Errorval) {
+    MCTPtr->ErrCode = Errorval;
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrinit.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrinit.c
new file mode 100644
index 0000000000..d3bb5de935
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrinit.c
@@ -0,0 +1,125 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrinit.c
+ *
+ * Initializer support functions for Recovery mode
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "Ids.h"
+#include "mm.h"
+#include "ma.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_MRINIT_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern PSO_TABLE DefaultPlatformMemoryConfiguration[];
+extern MEM_PLATFORM_CFG* memRecPlatformTypeInstalled[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function initializes the default parameter, function pointers, build options
+ *   and SPD data for memory configuration
+ *
+ *     @param[in,out]   *MemPtr   - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+
+VOID
+AmdMemInitDataStructDefRecovery (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  MEM_PARAMETER_STRUCT *RefPtr;
+  UINT8 i;
+  UINT8 p;
+
+  RefPtr = MemPtr->ParameterListPtr;
+
+  // Memory Map/Mgt.
+  // Mask Bottom IO with 0xF8 to force hole size to have granularity of 128MB
+  RefPtr->BottomIo = 0xF0;
+
+  RefPtr->PlatformMemoryConfiguration = DefaultPlatformMemoryConfiguration;
+
+  i = 0;
+  for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+    if (memRecPlatformTypeInstalled[i] != NULL) {
+      MemPtr->GetPlatformCfg[p] = memRecPlatformTypeInstalled[i];
+      i++;
+    } else {
+      MemPtr->GetPlatformCfg[p] = MemRecNGetPsCfgDef;
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrm.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrm.c
new file mode 100644
index 0000000000..9b3ac9048a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrm.c
@@ -0,0 +1,288 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrm.c
+ *
+ * Main configuration for Recovery mode
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 48317 $ @e \$Date: 2011-03-07 10:38:14 -0700 (Mon, 07 Mar 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "cpuServices.h"
+#include "OptionMemoryRecovery.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_MRM_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DIES_PER_SOCKET     2
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_REC_NB_CONSTRUCTOR* MemRecNBInstalled[];
+extern MEM_REC_TECH_CONSTRUCTOR* MemRecTechInstalled[];
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecSPDDataProcess (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function is the Recovery memory configuration function for HY DDR3
+ *
+ *      Requirements:
+ *
+ *      Run-Time Requirements:
+ *      1. Complete Hypertransport Bus Configuration
+ *      2. AmdMemInitDataStructDef must be run to set default values
+ *      3. MSR bit to allow access to high PCI regs set on all nodes
+ *      4. BSP in Big Real Mode
+ *      5. Stack available
+ *      6. MCG_CTL=-1, MC4_EN=0 for all CPUs
+ *      7. MCi_STS from shutdown/warm reset recorded (if desired) prior to entry
+ *      8. All var MTRRs reset to zero
+ *      9. State of NB_CFG.DisDatMsk set properly on all CPUs
+ *
+ *     @param[in,out]   *MemPtr   - Pointer to the MEM_DATA_STRUCT
+ *
+ *     @return          AGESA_STATUS
+ *                          - AGESA_ALERT
+ *                          - AGESA_FATAL
+ *                          - AGESA_SUCCESS
+ *                          - AGESA_WARNING
+ */
+
+AGESA_STATUS
+AmdMemRecovery (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  UINT8 Socket;
+  UINT8 Module;
+  UINT8 i;
+  AGESA_STATUS AgesaStatus;
+  PCI_ADDR Address;
+  MEM_NB_BLOCK NBBlock;
+  MEM_TECH_BLOCK TechBlock;
+  LOCATE_HEAP_PTR  SocketWithMem;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+
+  //
+  // Read SPD data
+  //
+  MemRecSPDDataProcess (MemPtr);
+
+  //
+  // Get the socket id from heap.
+  //
+  SocketWithMem.BufferHandle = AMD_REC_MEM_SOCKET_HANDLE;
+  if (HeapLocateBuffer (&SocketWithMem, &MemPtr->StdHeader) == AGESA_SUCCESS) {
+    Socket = *(UINT8 *) SocketWithMem.BufferPtr;
+  } else {
+    ASSERT(FALSE);  // Socket handle not found
+    return AGESA_FATAL;
+  }
+
+  //
+  // Allocate buffer for memory init structures
+  //
+  AllocHeapParams.RequestedBufferSize = MAX_DIES_PER_SOCKET * sizeof (DIE_STRUCT);
+  AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DIE_STRUCT_HANDLE, 0, 0, 0);
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+    ASSERT(FALSE); // Heap allocation failed to allocate Die struct
+    return AGESA_FATAL;
+  }
+  MemPtr->DiesPerSystem = (DIE_STRUCT *)AllocHeapParams.BufferPtr;
+
+  //
+  // Discover populated CPUs
+  //
+  for (Module = 0; Module < MAX_DIES_PER_SOCKET; Module++) {
+    if (GetPciAddress ((VOID *)MemPtr, Socket, Module, &Address, &AgesaStatus)) {
+      MemPtr->DiesPerSystem[Module].SocketId = Socket;
+      MemPtr->DiesPerSystem[Module].DieId = Module;
+      MemPtr->DiesPerSystem[Module].PciAddr.AddressValue = Address.AddressValue;
+    }
+  }
+
+  i = 0;
+  while (MemRecNBInstalled[i] != NULL) {
+    if (MemRecNBInstalled[i] (&NBBlock, MemPtr, 0) == TRUE) {
+      break;
+    }
+    i++;
+  };
+  if (MemRecNBInstalled[i] == NULL) {
+    ASSERT(FALSE);    // No NB installed
+    return AGESA_FATAL;
+  }
+  MemRecTechInstalled[0] (&TechBlock, &NBBlock);
+  NBBlock.TechPtr = &TechBlock;
+
+  return NBBlock.InitRecovery (&NBBlock);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  This function fills a default SPD buffer with SPD values for all DIMMs installed in the system
+ *
+ *     @param[in,out]   *MemPtr   - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+
+VOID
+STATIC
+MemRecSPDDataProcess (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  BOOLEAN FindSocketWithMem;
+  UINT8 Channel;
+  UINT8 Dimm;
+  UINT8 MaxSockets;
+  UINT8 *SocketWithMem;
+  UINT8 Socket;
+  AGESA_STATUS AgesaStatus;
+  SPD_DEF_STRUCT *DimmSPDPtr;
+  ALLOCATE_HEAP_PARAMS AllocHeapParams;
+  AGESA_READ_SPD_PARAMS SpdParam;
+  ASSERT (MemPtr != NULL);
+  FindSocketWithMem = FALSE;
+  //
+  // Allocate heap to save socket number with memory on it.
+  //
+  AllocHeapParams.RequestedBufferSize = sizeof (UINT8);
+  AllocHeapParams.BufferHandle = AMD_REC_MEM_SOCKET_HANDLE;
+  AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+  if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) == AGESA_SUCCESS) {
+    SocketWithMem = (UINT8 *) AllocHeapParams.BufferPtr;
+    *SocketWithMem = 0;
+
+    //
+    // Allocate heap for the table
+    //
+    MaxSockets = (UINT8) GetPlatformNumberOfSockets ();
+
+    AllocHeapParams.RequestedBufferSize = (MaxSockets * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL * sizeof (SPD_DEF_STRUCT));
+    AllocHeapParams.BufferHandle = AMD_MEM_SPD_HANDLE;
+    AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+    if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) == AGESA_SUCCESS) {
+      MemPtr->SpdDataStructure = (SPD_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+      //
+      // Initialize SpdParam Structure
+      //
+      LibAmdMemCopy ((VOID *)&SpdParam, (VOID *)MemPtr, (UINTN)sizeof (SpdParam.StdHeader), &MemPtr->StdHeader);
+      //
+      // Populate SPDDataBuffer
+      //
+
+      SpdParam.MemData = MemPtr;
+      for (Socket = 0; Socket < MaxSockets; Socket ++) {
+        SpdParam.SocketId = Socket;
+        for (Channel = 0; Channel < MAX_CHANNELS_PER_SOCKET; Channel++) {
+          SpdParam.MemChannelId = Channel;
+          for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+            SpdParam.DimmId = Dimm;
+            DimmSPDPtr = &(MemPtr->SpdDataStructure[(Socket * MAX_CHANNELS_PER_SOCKET + Channel) * MAX_DIMMS_PER_CHANNEL + Dimm]);
+            SpdParam.Buffer = DimmSPDPtr->Data;
+            AgesaStatus = AgesaReadSpdRecovery (0, &SpdParam);
+            if (AgesaStatus == AGESA_SUCCESS) {
+              DimmSPDPtr->DimmPresent = TRUE;
+              IDS_HDT_CONSOLE (MEM_FLOW, "SPD Socket %d Channel %d Dimm %d: %08x\n", Socket, Channel, Dimm, SpdParam.Buffer);
+              if (!FindSocketWithMem) {
+                FindSocketWithMem = TRUE;
+              }
+            } else {
+              DimmSPDPtr->DimmPresent = FALSE;
+            }
+          }
+        }
+        if (FindSocketWithMem) {
+          *SocketWithMem = Socket;
+          break;
+        }
+      }
+    }
+  }
+}
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrport.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrport.h
new file mode 100644
index 0000000000..7ecb85b06b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrport.h
@@ -0,0 +1,86 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mport.h
+ *
+ * API's to support different OS
+ *
+ * A detailed description, giving important information about this file.
+ * Omit the detailed description if none is needed.  For other than the
+ * simplest files, there should be one.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Memory
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ *===========================================================================
+ *  AMD Revision History
+ *  Initial Version
+ *
+ */
+#ifndef _MPORT_H_
+#define _MPORT_H_
+
+///< 64 bit data structure
+///< lo - Lower 32 bits
+///< hi - Upper 32 bits
+typedef struct _S_UINT64 {
+  UINT32 lo; ///< Lower 32 bits
+  UINT32 hi; ///< Upper 32 bits
+} S_UINT64;
+/*
+ *   SBDFO - Segment Bus Device Function Offset
+ *   31:28   Segment (4-bits)
+ *   27:20   Bus     (8-bits)
+ *   19:15   Device  (5-bits)
+ *   14:12   Function(3-bits)
+ *   11:00   Offset  (12-bits)
+ */
+typedef UINT32 SBDFO;
+
+//#define MAKE_SBDFO(seg,bus,dev,fun,off) ((((UINT32)(seg))<<28) | (((UINT32)(bus))<<20) | \
+//                   (((UINT32)(dev))<<15) | (((UINT32)(fun))<<12) | ((UINT32)(off)))
+//#define SBDFO_SEG(x) (((UINT32)(x)>>28) & 0x0F)
+//#define SBDFO_BUS(x) (((UINT32)(x)>>20) & 0xFF)
+//#define SBDFO_DEV(x) (((UINT32)(x)>>15) & 0x1F)
+//#define SBDFO_FUN(x) (((UINT32)(x)>>12) & 0x07)
+//#define SBDFO_OFF(x) (((UINT32)(x)) & 0xFFF)
+//#define ILLEGAL_SBDFO 0xFFFFFFFF
+
+
+#define GET_SIZE_OF(x)   (sizeof (x) / sizeof (x[0]))
+
+#endif /* _MPORT_H_ */
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrt3.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrt3.h
new file mode 100644
index 0000000000..d5fe3eac8a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mrt3.h
@@ -0,0 +1,120 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mrt3.h
+ *
+ * Common Technology  Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MRT3_H_
+#define _MRT3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+MemRecTTrainDQSWriteHw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTDramInitSw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemRecTSetDramMode3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemRecTDIMMPresence3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTEMRS13 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTEMRS23 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTEMRS33 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTMRS3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemRecTDramControlRegInit3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+#endif  /* _MRT3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mru.asm b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mru.asm
new file mode 100644
index 0000000000..5520d8eafa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mru.asm
@@ -0,0 +1,187 @@
+;*****************************************************************************
+; AMD Generic Encapsulated Software Architecture
+;
+;  $Workfile:: mu.asm   $ $Revision:: 443#$  $Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+; Description: Main memory controller system configuration for AGESA DDR 2
+;
+;
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+;============================================================================
+
+
+    .XLIST
+    .LIST
+    .686p
+    .MODEL FLAT
+    .CODE
+     ASSUME FS: NOTHING
+
+
+; Define the calling convention used for the C library modules
+;@attention - This should be in a central include file
+CALLCONV    EQU     NEAR C
+
+
+;===============================================================================
+;MemRecUOutPort:
+;
+; Do a 32 Bit IO Out operation using edx.
+; NOTE: This function will be obsolete in the future.
+;
+;             In: Port - port number
+;                 Value - value to be written to port
+;
+;            Out:
+;
+;All registers preserved except for "Out:"
+;===============================================================================
+MemRecUOutPort PROC CALLCONV PUBLIC Port:DWORD, Value:DWORD
+    pushad
+    mov edx,Port
+    mov eax,Value
+    out dx,al
+    popad
+    ret
+MemRecUOutPort ENDP
+
+
+
+;----------------------------------------------------------------------------
+; _MFENCE();
+;
+_MFENCE macro
+    db  0Fh,0AEh,0F0h
+    endm
+
+;----------------------------------------------------------------------------
+; _EXECFENCE();
+;
+_EXECFENCE macro
+    out 0EDh,al             ;prevent speculative execution of following instructions
+    endm
+
+;===============================================================================
+;MemRecUWrite1CL:
+;
+;   Write data from buffer to a system address
+;
+;             In: Address - System address to read from
+;                 Pattern - pointer pattern.
+;
+;            Out:
+;
+;All registers preserved except for "Out:"
+;===============================================================================
+MemRecUWrite1CL PROC CALLCONV PUBLIC Address:DWORD, Pattern:NEAR PTR DWORD
+        pushad
+        push ds
+
+        mov eax,Address
+        push ss
+        pop ds
+        xor edx,edx
+        mov edx, DWORD PTR Pattern
+        mov esi,edx
+        mov edx,16
+        _EXECFENCE
+        mov ecx,4
+        @@:
+        db 66h,0Fh,6Fh,06           ;MOVDQA xmm0,[esi]
+        db 64h,66h,0Fh,0E7h,00      ;MOVNTDQ fs:[eax],xmm0  (xmm0 is 128 bits)
+        add eax,edx
+        add esi,edx
+        loop @B
+
+        pop ds
+        popad
+        ret
+MemRecUWrite1CL ENDP
+
+;===============================================================================
+;MemRecURead1CL:
+;
+; Read one cacheline to buffer
+;
+;             In: Buffer - pointer buffer.
+;               : Address - System address to read from
+;
+;            Out:
+;
+;All registers preserved except for "Out:"
+;===============================================================================
+MemRecURead1CL PROC CALLCONV PUBLIC Buffer:NEAR PTR DWORD, Address:DWORD
+
+        pushad
+
+        mov esi,Address
+        xor edx,edx
+        mov edx,DWORD PTR Buffer
+        mov edi,edx
+        mov ecx,64
+        @@:
+        mov al,fs:[esi]
+        mov ss:[edi],al
+        inc esi
+        inc edi
+        loop @B
+
+        popad
+        ret
+MemRecURead1CL ENDP
+
+
+;===============================================================================
+;MemRecUFlushPattern:
+;
+; Flush one cache line
+;
+;             In:   Address - System address [31:0]
+;            Out:
+;
+;All registers preserved except for "Out:"
+;===============================================================================
+MemRecUFlushPattern PROC CALLCONV PUBLIC Address:DWORD
+        pushad
+        mov eax,Address
+        _EXECFENCE
+                                        ;clflush fs:[eax]
+        db  064h                        ;access relative to FS BASE prefix
+        db  00Fh                        ;opcode
+        db  0AEh                        ;opcode
+        db  038h                        ;eax indirect addressing
+        _MFENCE
+        popad
+        ret
+MemRecUFlushPattern ENDP
+
+
+
+    END
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mru.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mru.h
new file mode 100644
index 0000000000..a2cd55338b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mru.h
@@ -0,0 +1,140 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mru.h
+ *
+ * Utility support Recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 50454 $ @e \$Date: 2011-04-10 21:20:37 -0600 (Sun, 10 Apr 2011) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MRU_H_
+#define _MRU_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#ifndef PSO_ENTRY
+  #define PSO_ENTRY UINT8
+#endif
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// Test patterns for DQS training
+typedef enum {
+  TestPattern0,             ///< Test pattern used in first pass of receiver enable training
+  TestPattern1,             ///< Test pattern used in first pass of receiver enable training
+  TestPattern2,             ///< Test pattern used in second pass of receiver enable training
+  TestPatternJD1B,          ///< 72-bit test pattern used in position training (ganged mode)
+  TestPatternJD1A,          ///< 72-bit test pattern used in position training
+  TestPatternML             ///< Test pattern used in first pass of max latency training
+} TRAIN_PATTERN;
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+MemRecUWrite1CL (
+  IN       UINT32 Address,
+  IN       UINT8 Pattern[]
+  );
+
+VOID
+MemRecURead1CL (
+  IN       UINT8 Buffer[],
+  IN       UINT32 Address
+  );
+
+VOID
+MemRecUFlushPattern (
+  IN       UINT32 Address
+  );
+
+VOID
+MemRecUFillTrainPattern (
+  IN       TRAIN_PATTERN Pattern,
+  IN       UINT8 Buffer[],
+  IN       UINT16 Size,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  );
+
+VOID
+MemRecUProcIOClFlush (
+  IN       UINT32 Address,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID
+MemRecUWait10ns (
+  IN       UINT32 Count,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID *
+MemRecFindPSOverrideEntry (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       PSO_ENTRY EntryType,
+  IN       UINT8 SocketID,
+  IN       UINT8 ChannelID,
+  IN       UINT8 DimmID
+  );
+
+UINT8
+RecGetMaxDimmsPerChannel (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       UINT8 SocketID,
+  IN       UINT8 ChannelID
+  );
+
+#endif  /* _MRU_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mruc.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mruc.c
new file mode 100644
index 0000000000..e385b26225
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/mruc.c
@@ -0,0 +1,270 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mruc.c
+ *
+ * Utility functions recovery
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Proc/Recovery/Mem)
+ * @e \$Revision: 52577 $ @e \$Date: 2011-05-09 12:58:33 -0600 (Mon, 09 May 2011) $
+ *
+ **/
+/*****************************************************************************
+*
+* Copyright (C) 2012 Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*     * Redistributions of source code must retain the above copyright
+*       notice, this list of conditions and the following disclaimer.
+*     * Redistributions in binary form must reproduce the above copyright
+*       notice, this list of conditions and the following disclaimer in the
+*       documentation and/or other materials provided with the distribution.
+*     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+*       its contributors may be used to endorse or promote products derived
+*       from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mrport.h"
+#include "mru.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_RECOVERY_MEM_MRUC_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemRecUResetTargetWTIO (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+VOID
+STATIC
+MemRecUSetTargetWTIO (
+  IN       UINT32 Address,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  );
+
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function returns the (Index)th UINT8
+ *   from an indicated test Pattern.
+ *
+ *     @param[in] Pattern - encoding of test Pattern type
+ *     @param[in] Buffer[] - buffer to be filled
+ *     @param[in] Size - Size of the bugger
+ *     @param[in] *StdHeader - pointer to AMD_CONFIG_PARAMS
+ *
+ */
+
+VOID
+MemRecUFillTrainPattern (
+  IN       TRAIN_PATTERN Pattern,
+  IN       UINT8 Buffer[],
+  IN       UINT16 Size,
+  IN       AMD_CONFIG_PARAMS *StdHeader
+  )
+{
+  STATIC UINT8 PatternData[2] = {0x55, 0xAA};
+
+  LibAmdMemFill (Buffer, PatternData[Pattern == TestPattern0 ? TestPattern1 : TestPattern0], Size, StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function flushes cache lines
+ *
+ *     @param[in] Address - System Address [39:8]
+ *     @param[in,out] *MemPtr - Pointer to MEM_DATA_STRUCT
+ *
+ */
+
+VOID
+MemRecUProcIOClFlush (
+  IN       UINT32 Address,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  MemRecUSetTargetWTIO (Address, MemPtr);
+  MemRecUFlushPattern (Address);
+  MemRecUResetTargetWTIO (MemPtr);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function resets the target address space to Write Through IO by disabling IORRs
+ */
+
+VOID
+STATIC
+MemRecUResetTargetWTIO (
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  S_UINT64 Smsr;
+  Smsr.hi = 0;
+  Smsr.lo = 0;
+  LibAmdMsrWrite (IORR0_MASK, (UINT64 *)&Smsr, &MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function sets the target range to WT IO (using an IORR overlapping
+ *       the already existing
+ *      @param[in,out] *MemPtr - pointer to MEM_DATA_STRUCTURE
+ *      @param[in] Address - System Address
+ *
+ */
+
+VOID
+STATIC
+MemRecUSetTargetWTIO (
+  IN       UINT32 Address,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  S_UINT64 SMsr;
+
+  SMsr.lo = Address;
+  SMsr.hi = 0;
+  LibAmdMsrWrite (IORR0_BASE,(UINT64 *)&SMsr, &MemPtr->StdHeader);          // ;IORR0 Base
+  SMsr.hi = 0xFFFF;
+  SMsr.lo = 0xFC000800;
+  LibAmdMsrWrite (IORR0_MASK, (UINT64 *)&SMsr, &MemPtr->StdHeader);          // ;64MB Mask
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *  Waits specified number of 10ns cycles
+ *      @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ *      @param[in] Count - Number of 10ns cycles to wait
+ *
+ */
+
+VOID
+MemRecUWait10ns (
+  IN       UINT32 Count,
+  IN OUT   MEM_DATA_STRUCT *MemPtr
+  )
+{
+  S_UINT64 SMsr;
+
+  LibAmdMsrRead (TSC, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  Count += SMsr.lo;
+  while (SMsr.lo < Count) {
+    LibAmdMsrRead (TSC, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      Find the entry of platform specific overriding table.
+ *
+ *      @param[in] PlatformMemoryConfiguration - Platform config table
+ *      @param[in] EntryType - Entry type
+ *      @param[in] SocketID - Physical socket ID
+ *      @param[in] ChannelID - Physical channel ID
+ *      @param[in] DimmID - Physical Dimm ID
+ *
+ *      @return  NULL - entry could not be found.
+ *      @return  Pointer - points to the entry's data.
+ *
+ * ----------------------------------------------------------------------------
+ */
+VOID *
+MemRecFindPSOverrideEntry (
+  IN       PSO_TABLE *PlatformMemoryConfiguration,
+  IN       PSO_ENTRY EntryType,
+  IN       UINT8 SocketID,
+  IN       UINT8 ChannelID,
+  IN       UINT8 DimmID
+  )
+{
+  UINT8 *Buffer;
+
+  Buffer = PlatformMemoryConfiguration;
+  while (Buffer[0] != PSO_END) {
+    if (Buffer[0] == EntryType) {
+      if ((Buffer[2] & ((UINT8) 1 << SocketID)) != 0 ) {
+        if ((Buffer[3] & ((UINT8) 1 << ChannelID)) != 0 ) {
+          ASSERT ((Buffer[0] == PSO_MAX_DIMMS) ? (Buffer[5] <= MAX_DIMMS_PER_CHANNEL) : TRUE);
+          ASSERT ((Buffer[0] == PSO_MAX_CHIPSELS) ? (Buffer[5] <= MAX_CS_PER_CHANNEL) : TRUE);
+          ASSERT ((Buffer[0] == PSO_MAX_CHNLS) ? (Buffer[5] <= MAX_CHANNELS_PER_SOCKET) : TRUE);
+          if ((Buffer[4] & ((UINT8) 1 << DimmID)) != 0 ) {
+            return &Buffer[5];
+          }
+        }
+      }
+    }
+    Buffer += Buffer[1] + 2;
+  }
+  return NULL;
+}
+
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/recoveryPage.h b/src/vendorcode/amd/agesa/f15/Proc/Recovery/recoveryPage.h
new file mode 100644
index 0000000000..9e6ac66d23
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/recoveryPage.h
@@ -0,0 +1,58 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Create outline and references for Recovery Component mainpage documentation.
+ *
+ * Design guides, maintenance guides, and general documentation, are
+ * collected using this file onto the documentation mainpage.
+ * This file contains doxygen comment blocks, only.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Documentation
+ * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/**
+ * @page recoverymain Recovery Component Documentation
+ *
+ * Additional documentation for the Recovery component consists of
+ *
+ * - Maintenance Guides:
+ *   - add here >>>
+ * - Design Guides:
+ *   - add here >>>
+ *
+ */
diff --git a/src/vendorcode/amd/agesa/f15/cpcar.inc b/src/vendorcode/amd/agesa/f15/cpcar.inc
new file mode 100644
index 0000000000..544cc643a9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/cpcar.inc
@@ -0,0 +1,1470 @@
+;*****************************************************************************
+; AMD Generic Encapsulated Software Architecture
+;
+; $Workfile:: cpcar.inc
+;
+; Description: CPCAR.INC - AGESA cache-as-RAM setup Include File
+;
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+    .LIST
+    .mmx
+
+BSP_STACK_BASE_ADDR     EQU 30000h      ; Base address for primary cores stack
+BSP_STACK_SIZE_64K      EQU 10000h      ; 64KB for BSP core
+BSP_STACK_SIZE_32K      EQU 8000h       ; 32KB for BSP core
+CORE0_STACK_BASE_ADDR   EQU 80000h      ; Base address for primary cores stack
+CORE0_STACK_SIZE        EQU 4000h       ; 16KB for primary cores
+CORE1_STACK_BASE_ADDR   EQU 40000h      ; Base address for AP cores
+CORE1_STACK_SIZE        EQU 1000h       ; 4KB for each AP cores
+
+L3_CONTROL_REGISTER     EQU 8100C3B8h   ; Bus 0, Device 18h, Function 3, Offset 1B8h
+
+APIC_BASE_ADDRESS       EQU 0000001Bh
+    APIC_BSC                EQU 8       ; Boot Strap Core
+
+APIC_MSG_REG            EQU 380h        ; Location of BSC message
+    APIC_MSG            EQU 00DE00ADh   ; Message data
+APIC_CMD_LO_REG         EQU 300h        ; APIC command low
+APIC_CMD_HI_REG         EQU 310h        ; APIC command high
+    CMD_REG_TO_READ_DATA EQU 00000338h  ; APIC command for remote read of APIC_MSG_REG
+    REMOTE_READ_STS       EQU 00030000h ; Remote read status mask
+    REMOTE_DELIVERY_PEND  EQU 00010000h ; Remote read is pending
+    REMOTE_DELIVERY_DONE  EQU 00020000h ; Remote read is complete
+    DELIVERY_STS_BIT    EQU 12          ; Delivery status valid bit
+APIC_ID_REG             EQU 0020h       ; Local APIC ID offset
+    APIC20_APICID       EQU 24
+APIC_REMOTE_READ_REG    EQU 00C0h       ; Remote read offset
+
+; Flags can only run from bits 31 to 24.  Bits 23:0 are in use.
+AMD_CU_NEED_TO_WAIT     EQU 31
+AMD_CU_SEND_INVD_MSG    EQU 30
+AMD_CU_RESTORE_ES       EQU 29
+
+AMD_MTRR_VARIABLE_BASE0 EQU 0200h
+AMD_MTRR_VARIABLE_BASE6 EQU 020Ch
+AMD_MTRR_VARIABLE_BASE7 EQU 020Eh
+    VMTRR_VALID             EQU     11
+    MTRR_TYPE_WB            EQU     06h
+    MTRR_TYPE_WP            EQU     05h
+    MTRR_TYPE_WT            EQU     04h
+    MTRR_TYPE_UC            EQU     00h
+AMD_MTRR_VARIABLE_MASK7 EQU 020Fh
+AMD_MTRR_FIX64k_00000   EQU 0250h
+AMD_MTRR_FIX16k_80000   EQU 0258h
+AMD_MTRR_FIX16k_A0000   EQU 0259h
+AMD_MTRR_FIX4k_C0000    EQU 0268h
+AMD_MTRR_FIX4k_C8000    EQU 0269h
+AMD_MTRR_FIX4k_D0000    EQU 026Ah
+AMD_MTRR_FIX4k_D8000    EQU 026Bh
+AMD_MTRR_FIX4k_E0000    EQU 026Ch
+AMD_MTRR_FIX4k_E8000    EQU 026Dh
+AMD_MTRR_FIX4k_F0000    EQU 026Eh
+AMD_MTRR_FIX4k_F8000    EQU 026Fh
+
+AMD_MTRR_DEFTYPE        EQU 02FFh
+    WB_DRAM_TYPE            EQU 1Eh     ; MemType - memory type
+    MTRR_DEF_TYPE_EN        EQU 11      ; MtrrDefTypeEn - variable and fixed MTRRs default enabled
+    MTRR_DEF_TYPE_FIX_EN    EQU 10      ; MtrrDefTypeEn - fixed MTRRs default enabled
+
+HWCR                    EQU 0C0010015h  ; Hardware Configuration
+    INVD_WBINVD             EQU 4       ;   INVD to WBINVD conversion
+
+IORR_BASE               EQU 0C0010016h  ; IO Range Regusters Base/Mask, 2 pairs
+                                        ;   uses 16h - 19h
+TOP_MEM                 EQU 0C001001Ah  ; Top of Memory
+TOP_MEM2                EQU 0C001001Dh  ; Top of Memory2
+
+LS_CFG                  EQU 0C0011020h  ; Load-Store Configuration
+    DIS_SS                  EQU 28      ;   Family 10h,12h,15h:Disable Streaming Store functionality
+    DIS_STREAM_ST           EQU 28      ;   Family 14h:DisStreamSt - Disable Streaming Store functionality
+
+IC_CFG                  EQU 0C0011021h  ; Instruction Cache Config Register
+    IC_DIS_SPEC_TLB_RLD     EQU 9       ;   Disable speculative TLB reloads
+    DIS_IND                 EQU 14      ;   Family 10-14h:Disable Indirect Branch Predictor
+    DIS_I_CACHE             EQU 14      ;   Family 15h:DisICache - Disable Indirect Branch Predictor
+
+DC_CFG                  EQU 0C0011022h  ; Data Cache Configuration
+    DC_DIS_SPEC_TLB_RLD     EQU 4       ;   Disable speculative TLB reloads
+    DIS_CLR_WBTOL2_SMC_HIT  EQU 8       ;   self modifying code check buffer bit
+    DIS_HW_PF               EQU 13      ;   Hardware prefetches bit
+
+CU_CFG                  EQU 0C0011023h  ; Family 15h: Combined Unit Configuration
+    L2_WAY_LOCK_EN          EQU 23      ;   L2WayLock - L2 way lock enable
+    L2_FIRST_LOCKED_WAY     EQU 19      ;   L2FirstLockedWay - first L2 way lockedh
+    L2_FIRST_LOCKED_WAY_OR_MASK  EQU 000780000h
+
+DE_CFG                  EQU 0C0011029h  ; Decode Configuration
+    CL_FLUSH_SERIALIZE      EQU 23      ;   Family 12h,15h: CL Flush Serialization
+
+BU_CFG2                 EQU 0C001102Ah  ; Family 10h-14h: Bus Unit Configuration 2
+CU_CFG2                 EQU 0C001102Ah  ; Family 15h: Combined Unit Configuration 2
+    F10_CL_LINES_TO_NB_DIS  EQU 15      ;   ClLinesToNbDis - allows WP code to be cached in L2
+    IC_DIS_SPEC_TLB_WR      EQU 35      ;   IcDisSpecTlbWr - ITLB speculative writes
+
+CU_CFG3                 EQU 0C001102Bh  ; Combined Unit Configuration 3
+    COMBINE_CR0_CD          EQU 49      ;   Combine CR0.CD for both cores of a compute unit
+
+
+CR0_PE                  EQU 0           ; Protection Enable
+CR0_NW                  EQU 29          ; Not Write-through
+CR0_CD                  EQU 30          ; Cache Disable
+CR0_PG                  EQU 31          ; Paging Enable
+
+; CPUID Functions
+
+CPUID_MODEL             EQU 1
+AMD_CPUID_FMF           EQU 80000001h   ; Family Model Features information
+AMD_CPUID_L2Cache       EQU 80000006h   ; L2/L3 cache info
+AMD_CPUID_APIC          EQU 80000008h   ; Long Mode and APIC info., core count
+    APIC_ID_CORE_ID_SIZE     EQU 12     ; ApicIdCoreIdSize bit position
+
+NB_CFG                  EQU 0C001001Fh  ; Northbridge Configuration Register
+    INIT_APIC_ID_CPU_ID_LO   EQU 54     ;   InitApicIdCpuIdLo - is core# in high or low half of APIC ID?
+    ENABLE_CF8_EXT_CFG       EQU 46     ;   EnableCf8ExtCfg - enable CF8 extended configuration cycles
+
+MTRR_SYS_CFG            EQU 0C0010010h  ; System Configuration Register
+  CHX_TO_DIRTY_DIS          EQU 16      ;   ChxToDirtyDis    Change to dirty disable
+  SYS_UC_LOCK_EN            EQU 17      ;   SysUcLockEn      System lock command enable
+  MTRR_FIX_DRAM_EN          EQU 18      ;   MtrrFixDramEn    MTRR fixed RdDram and WrDram attributes enable
+  MTRR_FIX_DRAM_MOD_EN      EQU 19      ;   MtrrFixDramModEn MTRR fixed RdDram and WrDram modification enable
+  MTRR_VAR_DRAM_EN          EQU 20      ;   MtrrVarDramEn    MTRR variable DRAM enable
+  MTRR_TOM2_EN              EQU 21      ;   MtrrTom2En       MTRR top of memory 2 enable
+
+PERF_CONTROL3           EQU 0C0010003h  ; Performance event control three
+    PERF_CONTROL3_RESERVE_L EQU 00200000h ; Preserve the reserved bits
+    PERF_CONTROL3_RESERVE_H EQU 0FCF0h  ; Preserve the reserved bits
+    CONFIG_EVENT_L          EQU 0F0E2h  ; All cores with level detection
+    CONFIG_EVENT_H          EQU 4       ; Increment count by number of event
+                                        ; occured in clock cycle
+    EVENT_ENABLE            EQU 22      ; Enable the event
+PERF_COUNTER3           EQU 0C0010007h  ; Performance event counter three
+
+; Local use flags, in upper most byte of ESI
+FLAG_UNKNOWN_FAMILY               EQU 24    ; Signals that the family# of the installed processor is not recognized
+FLAG_STACK_REENTRY                EQU 25    ; Signals that the environment has made a re-entry (2nd) call to set up the stack
+FLAG_IS_PRIMARY                   EQU 26    ; Signals that this core is the primary within the compute unit
+FLAG_CORE_NOT_IDENTIFIED          EQU 27    ; Signals that the cores/compute units of the installed processor is not recognized
+FLAG_FORCE_32K_STACK              EQU 28    ; Signals that to force 32KB stack size for BSP core
+
+; Error code returned in EDX by AMD_ENABLE_STACK
+IFNDEF CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY
+       CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY     EQU   008010500h
+ENDIF
+IFNDEF CPU_EVENT_STACK_REENTRY
+       CPU_EVENT_STACK_REENTRY                EQU   008020500h
+ENDIF
+IFNDEF CPU_EVENT_CORE_NOT_IDENTIFIED
+       CPU_EVENT_CORE_NOT_IDENTIFIED          EQU   008030500h
+ENDIF
+
+; AGESA_STATUS values
+IFNDEF AGESA_SUCCESS
+       AGESA_SUCCESS  EQU 0
+ENDIF
+IFNDEF AGESA_WARNING
+       AGESA_WARNING  EQU 4
+ENDIF
+IFNDEF AGESA_FATAL
+       AGESA_FATAL    EQU 7
+ENDIF
+;;***************************************************************************
+;;
+;;                      CPU MACROS - PUBLIC
+;;
+;;***************************************************************************
+_WRMSR macro
+  db  0Fh, 30h
+  endm
+
+_RDMSR macro
+  db  0Fh, 32h
+  endm
+
+AMD_CPUID MACRO arg0
+  IFB <arg0>
+    mov   eax, 1
+    db    0Fh, 0A2h                     ; Execute instruction
+    bswap eax
+    xchg  al, ah                        ; Ext model in al now
+    rol   eax, 8                        ; Ext model in ah, model in al
+    and   ax, 0FFCFh                    ; Keep 23:16, 7:6, 3:0
+  ELSE
+    mov   eax, arg0
+    db    0Fh, 0A2h
+  ENDIF
+ENDM
+
+;---------------------------------------------------
+; LoadTableAddress
+;       Due to the various assembly methodologies used by BIOS vendors, this macro is needed to abstract the
+;       loading of the address of a table. The default is the standard LEA instruction with table address.
+;       The IBV that needs to use an alternative method can define their version of the macro prior to including
+;       this file into their source.
+;       An alternative example:
+;         LoadTableAddress  MACRO MyTable
+;           LEA   eax, -(LAST_ADDRESS - MyTable)
+;---------------------------------------------------
+IFNDEF LoadTableAddress
+  LoadTableAddress        Macro TargetTable
+       LEA   eax, TargetTable
+  ENDM
+ENDIF
+
+
+;;***************************************************************************
+;;
+;;                      CPU STRUCTURES - PUBLIC
+;;
+;;***************************************************************************
+CPU_FAMILY_INFO     STRUC
+    L2_MIN_SIZE         WORD    ?       ; Minimum size of the L2 cache for this family, in K
+    NUM_SHARED_CORES    BYTE    ?       ; Number of cores sharing an L2 cache
+    L2_ALLOC_MEM        BYTE    ?       ; L2 space reserved for memory training, in K
+    L2_ALLOC_EXE        WORD    ?       ; L2 space reserved for EXE CACHE, in K. 0 means unlimited.
+    SIZE_ADDRESS_BUS    BYTE    ?       ; Number of address bits supported by this family
+    FAMILY_RESERVED     BYTE    ?       ; reserved, pad to DWORD size
+CPU_FAMILY_INFO     ENDS
+
+
+;---------------------------------------------------
+;
+; AMD_ENABLE_STACK_FAMILY_HOOK Macro - Stackless
+;
+;   Set any family specific controls needed to enable the use of
+;   cache as general storage before main memory is available.
+;
+; Inputs:
+;       ESI - node#, core#, flags from GET_NODE_ID_CORE_ID
+; Outputs:
+;       none
+; Destroyed:
+;       eax, ebx, ecx, edx
+;---------------------------------------------------
+AMD_ENABLE_STACK_FAMILY_HOOK MACRO
+
+    AMD_ENABLE_STACK_FAMILY_HOOK_F10
+    AMD_ENABLE_STACK_FAMILY_HOOK_F12
+    AMD_ENABLE_STACK_FAMILY_HOOK_F14
+    AMD_ENABLE_STACK_FAMILY_HOOK_F15
+
+ENDM
+
+;----------------------------------------------
+;
+; AMD_DISABLE_STACK_FAMILY_HOOK Macro - Stackless
+;
+;   Return any family specific controls to their 'standard'
+;   settings for using cache with main memory.
+;
+; Inputs:
+;       ESI - node#, core#, flags from GET_NODE_ID_CORE_ID
+; Outputs:
+;       none
+; Destroyed:
+;       eax, ebx, ecx, edx
+;----------------------------------------------
+AMD_DISABLE_STACK_FAMILY_HOOK MACRO
+
+    AMD_DISABLE_STACK_FAMILY_HOOK_F10
+    AMD_DISABLE_STACK_FAMILY_HOOK_F12
+    AMD_DISABLE_STACK_FAMILY_HOOK_F14
+    AMD_DISABLE_STACK_FAMILY_HOOK_F15
+
+ENDM
+
+;---------------------------------------------------
+;
+; GET_NODE_ID_CORE_ID Macro - Stackless
+;
+;   Read family specific values to determine the node and core
+;   numbers for the core executing this code.
+;
+; Inputs:
+;     none
+; Outputs:
+;     SI[7:0] = Core# (0..N, relative to node)
+;     SI[15:8]= Node# (0..N)
+;     SI[23:16]= reserved
+;     SI[24]=   flag: 1=Family Unrecognized
+;     SI[25]=   flag: 1=Interface re-entry call
+;     SI[26]=   flag: 1=Core is primary of compute unit
+;     SI[31:27]= reserved, =0
+;
+; Destroyed:
+;       eax, ebx, ecx, edx, esi
+;---------------------------------------------------
+GET_NODE_ID_CORE_ID MACRO
+
+    mov     si, -1
+    GET_NODE_ID_CORE_ID_F10
+    GET_NODE_ID_CORE_ID_F12
+    GET_NODE_ID_CORE_ID_F14
+    GET_NODE_ID_CORE_ID_F15
+      ;
+      ; Check for unrecognized Family
+      ;
+    .if (si == -1)                      ; Has family (node/core) been discovered?
+        mov     esi, ( (1 SHL FLAG_UNKNOWN_FAMILY)+(1 SHL FLAG_IS_PRIMARY) ) ; No, Set error code, Only let BSP continue
+        mov     ecx, APIC_BASE_ADDRESS  ; MSR:0000_001B
+        _RDMSR
+        bt      eax, APIC_BSC           ;   Is this the BSC?
+        .if (!carry?)
+            ; No, this is an AP
+            hlt                         ;       Kill APs
+        .endif
+    .endif
+ENDM
+
+
+
+
+;;***************************************************************************
+;;                      Family 10h MACROS
+;;***************************************************************************
+;---------------------------------------------------
+;
+; AMD_ENABLE_STACK_FAMILY_HOOK_F10 Macro - Stackless
+;
+;   Set any family specific controls needed to enable the use of
+;   cache as general storage before main memory is available.
+;
+; Inputs:
+;       ESI - node#, core#, flags from GET_NODE_ID_CORE_ID
+; Outputs:
+;       none
+; Destroyed:
+;       eax, ebx, ecx, edx
+;
+; Family 10h requirements (BKDG section 2.3.3):
+;   * Paging disabled
+;   * MSRC001_0015[INVDWBINVD]=0
+;   * MSRC001_1021[DIS_IND]=1
+;   * MSRC001_1021[DIS_SPEC_TLB_RLD]=1
+;   * MSRC001_1022[DIS_SPEC_TLB_RLD]=1
+;   * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=1
+;   * MSRC001_1022[DIS_HW_PF]=1
+;   * MSRC001_102A[IcDisSpecTlbWr]=1
+;   * MSRC001_102A[ClLinesToNbDis]=1
+;   * No INVD or WBINVD, no exceptions, page faults or interrupts
+;---------------------------------------------------
+AMD_ENABLE_STACK_FAMILY_HOOK_F10 MACRO
+    local   fam10_enable_stack_hook_exit
+
+    AMD_CPUID   CPUID_MODEL
+    mov     ebx, eax                    ; Save revision info to EBX
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 01h                     ; Is this family 10h?
+    jnz     fam10_enable_stack_hook_exit ; Br if no
+
+    ; Errata #385
+    ; F3x1B8[23] = 1 before enabling L3 cache through CR0[30](CD)
+    mov     eax, ebx                    ; Restore revision info to EAX
+    .if (al >= 80h)                     ; Is this Revision D and later?
+        mov     ecx, NB_CFG             ; MSR:C001_001F
+        _RDMSR                          ; EDX has EnableCf8ExtCfg bit
+        bts     edx, (ENABLE_CF8_EXT_CFG - 32)
+        _WRMSR
+
+        mov     eax, esi                ; Get node# from esi[15:8]
+        and     eax, 0000FF00h
+        shl     eax, (11 - 8)           ; Device#
+        add     eax, L3_CONTROL_REGISTER
+        mov     dx, 0CF8h               ; PCI Read
+        out     dx, eax
+        mov     dx, 0CFCh
+        in      eax, dx
+
+        or      eax, (1 shl 23)         ; F3x1B8[23] = 1
+
+        out     dx, eax                 ; PCI Write
+    .endif
+
+    mov     ecx, DC_CFG                 ; MSR:C001_1022
+    _RDMSR
+    bts     eax, DC_DIS_SPEC_TLB_RLD    ; Turn on Disable speculative DTLB reloads bit
+    bts     eax, DIS_CLR_WBTOL2_SMC_HIT ; Turn on Disable the self modifying code check buffer bit
+    bts     eax, DIS_HW_PF              ; Turn on Disable hardware prefetches bit
+    _WRMSR
+
+    dec     cx                          ; MSR:C001_1021
+    _RDMSR
+    bts     eax, IC_DIS_SPEC_TLB_RLD    ; Turn on Disable speculative TLB reloads bit
+    bts     eax, DIS_IND                ; Turn on Disable indirect branch predictor
+    _WRMSR
+
+    mov     ecx, BU_CFG2                ; MSR C001_102A
+    _RDMSR
+    bts     eax, F10_CL_LINES_TO_NB_DIS  ; Allow BIOS ROM to be cached in the IC
+    bts     edx, (IC_DIS_SPEC_TLB_WR-32) ;Disable speculative writes to the ITLB
+    _WRMSR
+
+    mov     ecx, HWCR                   ; MSR C001_0015
+    _RDMSR
+
+    bt      esi, FLAG_STACK_REENTRY     ; Check if stack has already been set
+    .if (!carry?)
+        btr     eax, INVD_WBINVD        ; disable INVD -> WBINVD conversion
+        _WRMSR
+    .endif
+
+    mov eax, esi                        ; load core#
+    .if (al == 0)                       ; If (BSP)
+        mov     ecx, PERF_COUNTER3      ;   Select performance counter three
+                                        ;   to count number of CAR evictions
+        xor     eax, eax                ;   Initialize the lower part of the counter to zero
+        xor     edx, edx                ;   Initializa the upper part of the counter to zero
+        _WRMSR                          ;   Save it
+        mov     ecx, PERF_CONTROL3      ;   Select the event control three
+        _RDMSR                          ;   Get the current setting
+        and     eax, PERF_CONTROL3_RESERVE_L  ; Preserve the reserved bits
+        or      eax, CONFIG_EVENT_L     ;   Set the lower part of event register to
+                                        ;   select CAR Corruption occurred by any cores
+        and     dx, PERF_CONTROL3_RESERVE_H  ; Preserve the reserved bits
+        or      dx, CONFIG_EVENT_H      ;   Set the upper part of event register
+        _WRMSR                          ;   Save it
+        bts     eax, EVENT_ENABLE       ;   Enable it
+        _WRMSR                          ;   Save it
+    .endif                              ; endif
+
+fam10_enable_stack_hook_exit:
+ENDM
+
+;----------------------------------------------
+;
+; AMD_DISABLE_STACK_FAMILY_HOOK_F10 Macro - Stackless
+;
+;   Return any family specific controls to their 'standard'
+;   settings for using cache with main memory.
+;
+; Inputs:
+;       ESI - [31:24] flags; [15,8]= Node#; [7,0]= core#
+; Outputs:
+;       none
+; Destroyed:
+;       eax, ebx, ecx, edx
+;
+; Family 10h requirements:
+;   * INVD or WBINVD
+;   * MSRC001_0015[INVD_WBINVD]=1
+;   * MSRC001_1021[DIS_IND]=0
+;   * MSRC001_1021[DIS_SPEC_TLB_RLD]=0
+;   * MSRC001_1022[DIS_SPEC_TLB_RLD]=0
+;   * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=0
+;   * MSRC001_1022[DIS_HW_PF]=0
+;   * MSRC001_102A[IcDisSpecTlbWr]=0
+;   * MSRC001_102A[ClLinesToNbDis]=0
+;----------------------------------------------
+AMD_DISABLE_STACK_FAMILY_HOOK_F10 MACRO
+    local   fam10_disable_stack_hook_exit
+
+    AMD_CPUID   CPUID_MODEL
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 01h                     ; Is this family 10h?
+    jnz     fam10_disable_stack_hook_exit ; Br if no
+
+    mov     ecx, DC_CFG                 ; MSR:C001_1022
+    _RDMSR
+    btr     eax, DC_DIS_SPEC_TLB_RLD    ; Enable speculative TLB reloads
+    btr     eax, DIS_CLR_WBTOL2_SMC_HIT ; Allow self modifying code check buffer
+    btr     eax, DIS_HW_PF              ; Allow hardware prefetches
+    _WRMSR
+
+    dec     cx                          ; MSR:C001_1021
+    _RDMSR
+    btr     eax, DIS_IND                ; Turn on indirect branch predictor
+    btr     eax, IC_DIS_SPEC_TLB_RLD    ; Turn on speculative TLB reloads
+    _WRMSR
+
+    mov     ecx, BU_CFG2                ; MSR:C001_102A
+    _RDMSR
+    btr     eax, F10_CL_LINES_TO_NB_DIS  ; Return L3 to normal mode
+    btr     edx, (IC_DIS_SPEC_TLB_WR-32) ;Re-enable speculative writes to the ITLB
+    _WRMSR
+
+    ;--------------------------------------------------------------------------
+    ; Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    ;--------------------------------------------------------------------------
+    mov     ecx, HWCR                   ; MSR:0000_0015
+    _RDMSR
+    mov     bx, ax                      ; Save INVD -> WBINVD bit
+    btr     eax, INVD_WBINVD            ; Disable INVD -> WBINVD conversion for the invd instruction.
+    _WRMSR
+    invd                                ; Clear the cache tag RAMs
+    mov     ax, bx                      ; Restore INVD -> WBINVD bit
+    _WRMSR
+
+    ;--------------------------------------------------------------------------
+    ; End critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    ;--------------------------------------------------------------------------
+
+    mov     ecx, PERF_CONTROL3          ; Select the event control three
+    _RDMSR                              ; Retrieve the current value
+    btc     eax, EVENT_ENABLE           ; Is event enable, complement it as well
+    jnc     fam10_disable_stack_hook_exit ; No
+    cmp     ax, CONFIG_EVENT_L          ; Is the lower part of event set to capture the CAR Corruption
+    jne     fam10_disable_stack_hook_exit ; No
+    cmp     dl,  CONFIG_EVENT_H         ; Is the upper part of event set to capture the CAR Corruption
+    jne     fam10_disable_stack_hook_exit ; No
+    _WRMSR                              ; Disable the event
+
+fam10_disable_stack_hook_exit:
+ENDM
+
+;---------------------------------------------------
+;
+; GET_NODE_ID_CORE_ID_F10 Macro - Stackless
+;
+;   Read family specific values to determine the node and core
+;   numbers for the core executing this code.
+;
+; Inputs:
+;     none
+; Outputs:
+;     ESI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above)
+;     MM5 = 32b pointer to family info structure
+; Destroyed:
+;       eax, ebx, ecx, edx, esi, mm5
+;---------------------------------------------------
+GET_NODE_ID_CORE_ID_F10 MACRO
+
+    local   node_core_f10_exit
+    local   end_of_f10h_data
+
+    IFNDEF FAM10H_INFO_STRUCT
+        jmp     end_of_f10h_data
+        ; Family 10h Info Structure:          L2Size,  #SharedCores, AllocMem, AllocExe, SzAddrBus, pad
+        FAM10H_INFO_STRUCT  CPU_FAMILY_INFO {  512,         1,          16,     384,      48,         0}
+end_of_f10h_data:
+    ENDIF
+
+    cmp     si, -1                      ; Has node/core already been discovered?
+    jnz     node_core_f10_exit          ; Br if yes
+
+    AMD_CPUID   CPUID_MODEL
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 01h                     ; Is this family 10h?
+    jnz     node_core_f10_exit          ; Br if no
+
+    LoadTableAddress(FAM10H_INFO_STRUCT)
+    movd    mm5, eax                    ; load pointer to Family Info Struc
+
+    xor     esi, esi                    ; Assume BSC, clear flags
+    mov     ecx, APIC_BASE_ADDRESS      ; MSR:0000_001B
+    _RDMSR
+    bt      eax, APIC_BSC               ; Is this the BSC?
+    .if (carry?)
+        ; This is the BSP.
+        ; Enable routing tables on BSP (just in case the HT init code has not yet enabled them)
+        mov     eax, 8000C06Ch          ;   PCI address for D18F0x6C Link Initialization Control Register
+        mov     dx, 0CF8h
+        out     dx, eax
+        add     dx, 4
+        in      eax, dx
+        btr     eax, 0                  ;   Set LinkInitializationControl[RouteTblDis] = 0
+        out     dx, eax
+    .else
+        ; This is an AP. Routing tables have been enabled by the HT Init process.
+        ; Also, the MailBox register was set by the BSP during early init
+        ;   The Mailbox register content is formatted as follows:
+        ;         UINT32 Node:4;        // The node id of Core's node.
+        ;         UINT32 Socket:4;      // The socket of this Core's node.
+        ;         UINT32 Module:2;      // The internal module number for Core's node.
+        ;         UINT32 ModuleType:2;  // Single Module = 0, Multi-module = 1.
+        ;         UINT32 :20;           // Reserved
+        ;
+        mov     ecx, 0C0000408h         ; Read the family 10h mailbox
+        _RDMSR                          ;          MC4_MISC1[63:32]
+        mov     si, dx                  ;   SI = raw mailbox contents (will extract node# from this)
+        shr     ebx, 24                 ;   BL = CPUID Fn0000_0001_EBX[LocalApicId]
+        mov     di, bx                  ;   DI = Initial APIC ID (will extract core# from this)
+
+        AMD_CPUID   AMD_CPUID_APIC      ;
+        shr     ch, 4                   ;   CH = ApicIdSize, #bits in APIC ID that show core#
+        inc     cl                      ;   CL = Number of enabled cores in the socket
+        mov     bx, cx
+
+        mov     ecx, NB_CFG             ;   MSR:C001_001F
+        _RDMSR                          ;   EDX has InitApicIdCpuIdLo bit
+
+        mov     cl, bh                  ;   CL = APIC ID size
+        mov     al, 1                   ;   Convert APIC ID size to an AND mask
+        shl     al, cl                  ;   AL = 2^APIC ID size
+        dec     al                      ;   AL = mask for relative core number
+        xor     ah, ah                  ;   AX = mask for relative core number
+        bt      edx, (INIT_APIC_ID_CPU_ID_LO-32) ; InitApicIdCpuIdLo == 1?
+        .if (!carry?)                   ;   Br if yes
+            mov     ch, 8               ;   Calculate core number shift count
+            sub     ch, cl              ;   CH = core shift count
+            mov     cl, ch
+            shr     di, cl              ;   Right justify core number
+        .endif
+        and     di, ax                  ;   DI = socket-relative core number
+
+        mov     cx, si                  ;   CX = raw mailbox value
+        shr     cx, 10                  ;   CL[1:0] = ModuleType or #nodes per socket (0-SCM, 1-MCM)
+        and     cl, 3                   ;   Isolate ModuleType
+        xor     bh, bh                  ;   BX = Number of enabled cores in the socket
+        shr     bx, cl                  ;   BX = Number of enabled cores per node
+        xor     dx, dx                  ;   Clear upper word for div
+        mov     ax, di                  ;   AX = socket-relative core number
+        div     bx                      ;   DX = node-relative core number
+        movzx   eax, si                 ;   prepare return value (clears flags)
+        and     ax, 000Fh               ;   AX = node number
+        shl     ax, 8                   ;   [15:8]=node#
+        mov     al, dl                  ;   [7:0]=core# (relative to node)
+        mov     esi, eax                ;   ESI = return value
+    .endif                              ; end: Is_AP
+    bts     esi, FLAG_IS_PRIMARY        ; all Family 10h cores are primary
+    bts     esi, FLAG_FORCE_32K_STACK   ; all Family 10h to force 32KB stack size for BSP core
+
+node_core_f10_exit:
+ENDM
+
+
+;;***************************************************************************
+;;                      Family 12h MACROS
+;;***************************************************************************
+;---------------------------------------------------
+;
+; AMD_ENABLE_STACK_FAMILY_HOOK_F12 Macro - Stackless
+;
+;   Set any family specific controls needed to enable the use of
+;   cache as general storage before main memory is available.
+;
+; Inputs:
+;       ESI - node#, core#, flags from GET_NODE_ID_CORE_ID
+; Outputs:
+;       none
+; Destroyed:
+;       eax, ebx, ecx, edx
+;
+; Family 12h requirements (BKDG section 2.3.3):
+;   The following requirements must be satisfied prior to using the cache as general storage:
+;   * Paging must be disabled.
+;   * MSRC001_0015[INVD_WBINVD]=0
+;   * MSRC001_1020[DIS_SS]=1
+;   * MSRC001_1021[DIS_SPEC_TLB_RLD]=1
+;   * MSRC001_1022[DIS_SPEC_TLB_RLD]=1
+;   * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=1
+;   * MSRC001_1022[DIS_HW_PF]=1
+;   * MSRC001_1029[ClflushSerialize]=1
+;   * No INVD or WBINVD, no exceptions, page faults or interrupts
+;---------------------------------------------------
+AMD_ENABLE_STACK_FAMILY_HOOK_F12 MACRO
+    local   fam12_enable_stack_hook_exit
+
+    AMD_CPUID   CPUID_MODEL
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 03h                     ; Is this family 12h?
+    jnz     fam12_enable_stack_hook_exit ; Br if no
+
+    mov     ecx, DC_CFG                 ; MSR:C001_1022
+    _RDMSR
+    bts     eax, DC_DIS_SPEC_TLB_RLD    ; Disable speculative DC-TLB reloads
+    bts     eax, DIS_CLR_WBTOL2_SMC_HIT ; Disable self modifying code check buffer
+    bts     eax, DIS_HW_PF              ; Disable hardware prefetches
+    _WRMSR
+
+    dec     cx   ;IC_CFG                ; MSR:C001_1021
+    _RDMSR
+    bts     eax, IC_DIS_SPEC_TLB_RLD    ; Disable speculative IC-TLB reloads
+    _WRMSR
+
+    dec     cx   ;LS_CFG                ; MSR:C001_1020
+    _RDMSR
+    bts     eax, DIS_SS                 ; Disabled Streaming store functionality
+    _WRMSR
+
+    mov     ecx, HWCR                   ; MSR C001_0015
+    _RDMSR
+    bt      esi, FLAG_STACK_REENTRY     ; Check if stack has already been set
+    .if (!carry?)
+        btr     eax, INVD_WBINVD        ;   disable INVD -> WBINVD conversion
+        _WRMSR
+    .endif
+
+    mov     ecx, DE_CFG                 ; MSR:C001_1029
+    _RDMSR
+    bts     eax, CL_FLUSH_SERIALIZE     ; Serialize all CL Flush actions
+    _WRMSR
+
+fam12_enable_stack_hook_exit:
+ENDM
+
+;----------------------------------------------
+;
+; AMD_DISABLE_STACK_FAMILY_HOOK_F12 Macro - Stackless
+;
+;   Return any family specific controls to their 'standard'
+;   settings for using cache with main memory.
+;
+; Inputs:
+;       ESI - [31:24] flags; [15,8]= Node#; [7,0]= core#
+; Outputs:
+;       none
+; Destroyed:
+;       eax, ebx, ecx, edx
+;
+; Family 12h requirements:
+;   * INVD or WBINVD
+;   * MSRC001_0015[INVD_WBINVD]=1
+;   * MSRC001_1020[DIS_SS]=0
+;   * MSRC001_1021[DIS_SPEC_TLB_RLD]=0
+;   * MSRC001_1022[DIS_SPEC_TLB_RLD]=0
+;   * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=0
+;   * MSRC001_1022[DIS_HW_PF]=0
+;   * MSRC001_1029[ClflushSerialize]=0
+;---------------------------------------------------
+AMD_DISABLE_STACK_FAMILY_HOOK_F12 MACRO
+    local   fam12_disable_stack_hook_exit
+
+    AMD_CPUID   CPUID_MODEL
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 03h                     ; Is this family 12h?
+    jnz     fam12_disable_stack_hook_exit ; Br if no
+
+    mov     ecx, DC_CFG                 ; MSR:C001_1022
+    _RDMSR
+    btr     eax, DC_DIS_SPEC_TLB_RLD    ; Turn on speculative DC-TLB reloads
+    btr     eax, DIS_CLR_WBTOL2_SMC_HIT ; Enable self modifying code check buffer
+    btr     eax, DIS_HW_PF              ; Enable Hardware prefetches
+    _WRMSR
+
+    dec     cx   ;IC_CFG                ; MSR:C001_1021
+    _RDMSR
+    btr     eax, IC_DIS_SPEC_TLB_RLD    ; Turn on speculative IC-TLB reloads
+    _WRMSR
+
+    dec     cx   ;LS_CFG                ; MSR:C001_1020
+    _RDMSR
+    btr     eax, DIS_SS                 ; Turn on Streaming store functionality
+    _WRMSR
+
+    mov     ecx, DE_CFG                 ; MSR:C001_1029
+    _RDMSR
+    btr     eax, CL_FLUSH_SERIALIZE
+    _WRMSR
+
+    ;--------------------------------------------------------------------------
+    ; Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    ;--------------------------------------------------------------------------
+
+    mov     ecx, HWCR                    ; MSR:0000_0015h
+    _RDMSR
+    mov     bx, ax                      ; Save INVD -> WBINVD bit
+    btr     eax, INVD_WBINVD            ; Disable INVD -> WBINVD conversion
+    _WRMSR
+    invd                                ; Clear the cache tag RAMs
+    mov     ax, bx                      ; Restore INVD -> WBINVD bit
+    _WRMSR
+
+    ;--------------------------------------------------------------------------
+    ; End critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    ;--------------------------------------------------------------------------
+
+fam12_disable_stack_hook_exit:
+ENDM
+
+;---------------------------------------------------
+;
+; GET_NODE_ID_CORE_ID_F12 Macro - Stackless
+;
+;   Read family specific values to determine the node and core
+;   numbers for the core executing this code.
+;
+; Inputs:
+;       none
+; Outputs:
+;       ESI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above)
+;       MM5 = 32b pointer to family info structure
+; Destroyed:
+;       eax, ebx, ecx, edx, esi, mm5
+;---------------------------------------------------
+GET_NODE_ID_CORE_ID_F12 MACRO
+
+    local   node_core_f12_exit
+    local   end_of_f12h_data
+
+    IFNDEF FAM12H_INFO_STRUCT
+        jmp     end_of_f12h_data
+        ; Family 12h Info Structure:          L2Size,  #SharedCores, AllocMem, AllocExe, SzAddrBus, pad
+        FAM12H_INFO_STRUCT  CPU_FAMILY_INFO {  512,         1,          0,     384,      40,         0 }
+end_of_f12h_data:
+    ENDIF
+
+    cmp     si, -1                      ; Has node/core already been discovered?
+    jnz     node_core_f12_exit          ; Br if yes
+
+    AMD_CPUID   CPUID_MODEL
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 03h                     ; Is this family 12h?
+    jnz     node_core_f12_exit          ; Br if no
+
+    LoadTableAddress(FAM12H_INFO_STRUCT)
+    movd    mm5, eax                    ; load pointer to Family Info Struc
+
+    shr     ebx, 24                     ; CPUID_0000_0001_EBX[31:24]: initial local APIC physical ID
+    bts     ebx, FLAG_IS_PRIMARY        ; all family 12h cores are primary
+    mov     esi, ebx                    ; ESI = Node#=0, core number
+    bts     esi, FLAG_FORCE_32K_STACK   ; all Family 12h to force 32KB stack size for BSP core
+node_core_f12_exit:
+ENDM
+
+
+;;***************************************************************************
+;;                      Family 14h MACROS
+;;***************************************************************************
+;---------------------------------------------------
+;
+; AMD_ENABLE_STACK_FAMILY_HOOK_F14 Macro - Stackless
+;
+;   Set any family specific controls needed to enable the use of
+;   cache as general storage before main memory is available.
+;
+; Inputs:
+;       ESI - node#, core#, flags from GET_NODE_ID_CORE_ID
+; Outputs:
+;       none
+; Destroyed:
+;       eax, ebx, ecx, edx
+;
+; Family 14h requirements (BKDG section 2.3.3):
+;   * Paging must be disabled.
+;   * MSRC001_0015[INVD_WBINVD]=0.
+;   * MSRC001_1020[DisStreamSt]=1.
+;   * MSRC001_1021[DIS_SPEC_TLB_RLD]=1. Disable speculative ITLB reloads.
+;   * MSRC001_1022[DIS_HW_PF]=1.
+;   * No INVD or WBINVD, no exceptions, page faults or interrupts
+;---------------------------------------------------
+AMD_ENABLE_STACK_FAMILY_HOOK_F14 MACRO
+    local   fam14_enable_stack_hook_exit
+
+    AMD_CPUID   CPUID_MODEL
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 05h                     ; Is this family 14h?
+    jnz     fam14_enable_stack_hook_exit ; Br if no
+
+    mov     ecx, DC_CFG                 ; MSR:C001_1022
+    _RDMSR
+    bts     eax, DIS_HW_PF              ; Disable hardware prefetches
+    _WRMSR
+
+    dec     cx  ;IC_CFG                 ; MSR:C001_1021
+    _RDMSR
+    bts     eax, IC_DIS_SPEC_TLB_RLD    ; Disable speculative TLB reloads
+    _WRMSR
+
+    dec     cx  ;LS_CFG                 ; MSR:C001_1020
+    _RDMSR
+    bts     eax, DIS_STREAM_ST          ; Disabled Streaming store functionality
+    _WRMSR
+
+    mov     ecx, HWCR                   ; MSR C001_0015
+    _RDMSR
+    bt      esi, FLAG_STACK_REENTRY     ; Check if stack has already been set
+    .if (!carry?)
+        btr     eax, INVD_WBINVD        ; disable INVD -> WBINVD conversion
+        _WRMSR
+    .endif
+
+fam14_enable_stack_hook_exit:
+ENDM
+
+;----------------------------------------------
+;
+; AMD_DISABLE_STACK_FAMILY_HOOK_F14 Macro - Stackless
+;
+;   Return any family specific controls to their 'standard'
+;   settings for using cache with main memory.
+;
+; Inputs:
+;       ESI - [31:24] flags; [15,8]= Node#; [7,0]= core#
+; Outputs:
+;       none
+; Destroyed:
+;       eax, ebx, ecx, edx
+;
+; Family 14h requirements:
+;   * INVD or WBINVD
+;   * MSRC001_0015[INVD_WBINVD]=1.
+;   * MSRC001_1020[DisStreamSt]=0.
+;   * MSRC001_1021[DIS_SPEC_TLB_RLD]=0.
+;   * MSRC001_1022[DIS_HW_PF]=0.
+;---------------------------------------------------
+AMD_DISABLE_STACK_FAMILY_HOOK_F14 MACRO
+    local   fam14_disable_stack_hook_exit
+
+    AMD_CPUID   CPUID_MODEL
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 05h                     ; Is this family 14h?
+    jnz     fam14_disable_stack_hook_exit ; Br if no
+
+    mov     ecx, LS_CFG                 ; MSR:C001_1020
+    _RDMSR
+    btr     eax, DIS_STREAM_ST          ; Turn on Streaming store functionality
+    _WRMSR
+
+    inc     cx  ;IC_CFG                 ; MSR:C001_1021
+    _RDMSR
+    btr     eax, IC_DIS_SPEC_TLB_RLD    ; Turn on speculative DC-TLB reloads
+    _WRMSR
+
+    inc     cx  ;DC_CFG                 ; MSR:C001_1022
+    _RDMSR
+    btr     eax, DIS_HW_PF              ; Turn on hardware prefetches
+    _WRMSR
+
+    ;--------------------------------------------------------------------------
+    ; Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    ;--------------------------------------------------------------------------
+
+    mov     ecx, HWCR                    ; MSR:C001_0015h
+    _RDMSR
+    btr     eax, INVD_WBINVD            ; Disable INVD -> WBINVD conversion
+    _WRMSR
+    invd                                ; Clear the cache tag RAMs
+    bts     eax, INVD_WBINVD            ; Turn on Conversion of INVD to WBINVD
+    _WRMSR
+
+    ;--------------------------------------------------------------------------
+    ; End critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    ;--------------------------------------------------------------------------
+
+fam14_disable_stack_hook_exit:
+ENDM
+
+;---------------------------------------------------
+;
+; GET_NODE_ID_CORE_ID_F14 Macro - Stackless
+;
+;   Read family specific values to determine the node and core
+;   numbers for the core executing this code.
+;
+; Inputs:
+;     none
+; Outputs:
+;     ESI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above)
+;     MM5 = 32b pointer to family info structure
+; Destroyed:
+;       eax, ebx, ecx, edx, esi, mm5
+;---------------------------------------------------
+GET_NODE_ID_CORE_ID_F14 MACRO
+
+    local   node_core_f14_exit
+    local   end_of_f14h_data
+
+    IFNDEF FAM14H_INFO_STRUCT
+        jmp     end_of_f14h_data
+        ; Family 14h Info Structure:          L2Size,  #SharedCores, AllocMem, AllocExe, SzAddrBus, pad
+        FAM14H_INFO_STRUCT  CPU_FAMILY_INFO {  256,         1,          0,     0,        36,         0}
+end_of_f14h_data:
+    ENDIF
+
+    cmp     si, -1                      ; Has node/core already been discovered?
+    jnz     node_core_f14_exit          ; Br if yes
+
+    AMD_CPUID   CPUID_MODEL
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 05h                     ; Is this family 14h?
+    jnz     node_core_f14_exit          ; Br if no
+
+    LoadTableAddress(FAM14H_INFO_STRUCT)
+    movd    mm5, eax                    ; load pointer to Family Info Struc
+
+    shr     ebx, 24                     ; CPUID_0000_0001_EBX[31:24]: initial local APIC physical ID
+    bts     ebx, FLAG_IS_PRIMARY        ; all family 14h cores are primary
+    mov     esi, ebx                    ; ESI = Node#=0, core number
+node_core_f14_exit:
+ENDM
+
+
+
+;;***************************************************************************
+;;                      Family 15h MACROS
+;;***************************************************************************
+;---------------------------------------------------
+;
+; AMD_ENABLE_STACK_FAMILY_HOOK_F15 Macro - Stackless
+;
+;   Set any family specific controls needed to enable the use of
+;   cache as general storage before main memory is available.
+;
+; Inputs:
+;       ESI - node#, core#, flags from GET_NODE_ID_CORE_ID
+; Outputs:
+;       none
+; Destroyed:
+;       eax, ebx, ecx, edx
+;
+; Family 15h requirements (BKDG #42301 section 2.3.3):
+;   * Paging must be disabled.
+;   * MSRC001_0015[INVD_WBINVD]=0
+;   * MSRC001_1020[DisSS]=1
+;   * MSRC001_1021[DIS_SPEC_TLB_RLD]=1
+;   * MSRC001_1022[DIS_SPEC_TLB_RLD]=1
+;   * MSRC001_1022[DisHwPf]=1
+;   * No INVD or WBINVD, no exceptions, page faults or interrupts
+;---------------------------------------------------
+AMD_ENABLE_STACK_FAMILY_HOOK_F15 MACRO
+    local   fam15_enable_stack_hook_exit
+
+    AMD_CPUID   CPUID_MODEL
+    mov     ebx, eax                    ; Save revision info to EBX
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 06h                     ; Is this family 15h?
+    jnz     fam15_enable_stack_hook_exit ; Br if no
+
+    bt      esi, FLAG_STACK_REENTRY     ; Check if stack has already been set
+    .if (!carry?)
+        mov     ecx, HWCR               ; MSR C001_0015
+        _RDMSR
+        btr     eax, INVD_WBINVD        ; disable INVD -> WBINVD conversion
+        _WRMSR
+    .endif
+
+    mov     ecx, LS_CFG                 ; MSR:C001_1020
+    _RDMSR
+    bts     eax, DIS_SS                 ; Turn on Streaming store functionality disabled bit
+    _WRMSR
+
+    inc     ecx  ;IC_CFG                ; MSR:C001_1021
+    _RDMSR
+    bts     eax, IC_DIS_SPEC_TLB_RLD    ; Turn on Disable speculative IC-TLB reloads bit
+    _WRMSR
+
+    inc     ecx  ;DC_CFG                ; MSR:C001_1022
+    _RDMSR
+    bts     eax, DC_DIS_SPEC_TLB_RLD    ; Turn on Disable speculative DC-TLB reloads bit
+    bts     eax, DIS_HW_PF              ; Turn on Disable hardware prefetches bit
+    _WRMSR
+
+    mov     eax, ebx                    ; Restore revision info to EAX
+    shr     eax, 16
+    and     al, 0Fh                     ; AL = cpu extended model
+    .if (al == 01h)                     ; Is this TN?
+        ; Do TN enable stack special
+        mov     ecx, CU_CFG             ; MSR:C001_1023
+        _RDMSR
+        bt      eax, L2_WAY_LOCK_EN     ; Check if way 15 of the L2 needs to be reserved
+        .if (!carry?)
+            bts     eax, L2_WAY_LOCK_EN
+            or      eax, L2_FIRST_LOCKED_WAY_OR_MASK
+            _WRMSR
+        .endif
+    .endif
+    ; Do Standard Family 15 work
+    mov     ecx, CU_CFG3                ; MSR:C001_102B
+    _RDMSR
+    btr     edx, (COMBINE_CR0_CD - 32)  ; Clear CombineCr0Cd bit
+    _WRMSR
+
+fam15_enable_stack_hook_exit:
+ENDM
+
+
+;----------------------------------------------
+;
+; AMD_DISABLE_STACK_FAMILY_HOOK_F15 Macro - Stackless
+;
+;   Return any family specific controls to their 'standard'
+;   settings for using cache with main memory.
+;
+; Inputs:
+;       ESI - [31:24] flags; [15,8]= Node#; [7,0]= core#
+; Outputs:
+;       none
+; Destroyed:
+;       eax, ebx, ecx, edx
+;
+; Family 15h requirements:
+;   * INVD or WBINVD
+;   * MSRC001_0015[INVD_WBINVD]=1
+;   * MSRC001_1020[DisSS]=0
+;   * MSRC001_1021[DIS_SPEC_TLB_RLD]=0
+;   * MSRC001_1022[DIS_SPEC_TLB_RLD]=0
+;   * MSRC001_1022[DIS_HW_PF]=0
+;---------------------------------------------------
+AMD_DISABLE_STACK_FAMILY_HOOK_F15 MACRO
+    local   fam15_disable_stack_hook_exit
+    local   fam15_disable_stack_remote_read_exit
+
+    AMD_CPUID   CPUID_MODEL
+    mov     ebx, eax                    ; Save revision info to EBX
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 06h                     ; Is this family 15h?
+    jnz     fam15_disable_stack_hook_exit ; Br if no
+
+    mov     edi, ebx                    ; Save revision info to EDI
+    AMD_CPUID   AMD_CPUID_APIC
+    mov     al, cl                      ; AL = number of cores - 1
+    shr     cx, APIC_ID_CORE_ID_SIZE    ; CL = ApicIdCoreIdSize
+    mov     bx, 1
+    shl     bl, cl                      ; BL = theoretical number of cores on socket
+    dec     bx                          ; BL = core number on socket mask
+    mov     ah, bl                      ; AH = core number on socket mask
+    mov     ebx, edi                    ; Restore revision info to EBX
+    mov     di, ax                      ; DI[15:8] = core number mask, DI[7:0] = number of cores - 1
+
+    and     ebx, 0F00FFh
+    mov     eax, ebx
+    shr     eax, 8
+    or      bx, ax                      ; Save Extended Model, Model and Stepping to BX
+                                        ; [11:8] = Extended Model, [7:4] = Model, [3:0] = Stepping
+
+    ;; A handshake is required to ensure that all cores on a node invalidate in sync.
+    mov     ecx, APIC_BASE_ADDRESS
+    _RDMSR
+    mov     dx, bx                      ; Save Extended Model, Model and Stepping to DX
+    shl     edx, 16                     ; EDX[31:16] = Extended Model, Model and Stepping
+    mov     ebx, eax                    ; EBX = LAPIC base
+    xor     ecx, ecx                    ; Zero out CU flags
+    bts     ecx, AMD_CU_NEED_TO_WAIT    ; Default to waiting
+    bts     ecx, AMD_CU_SEND_INVD_MSG   ; Default to signaling
+    mov     eax, CR0
+    bt      ax, CR0_PE                  ; Are we in protected mode?
+    .if (!carry?)
+        bts     ecx, AMD_CU_RESTORE_ES  ; Indicate ES restore is required
+        mov     cx, es                  ; Save ES segment register to CX
+        xor     ax, ax
+        mov     es, ax                  ; Set ES to big real mode selector for 4GB access
+    .endif
+
+    and     bx, 0F000h                  ; EBX = LAPIC base, offset 0
+    or      bl, APIC_ID_REG
+    mov     eax, es:[ebx]               ; EAX[31:24] = APIC ID
+    shr     eax, APIC20_APICID          ; AL = APIC ID
+    mov     ah, al                      ; AH = APIC ID
+    mov     dx, di                      ; DH = core mask
+    and     ah, dh                      ; AH = core number
+    .if (zero?)
+        ;; Core 0 of a socket
+        btr     ecx, AMD_CU_SEND_INVD_MSG ; No need to signal after INVD
+        .if (dl != 0)
+            ;; This socket has multiple cores
+            and     bx, 0F000h          ; EBX = LAPIC base, offset 0
+            or      bx, APIC_MSG_REG
+            mov     edi, APIC_MSG
+            mov     es:[ebx], edi       ; Signal for non core 0s to complete CAR breakdown
+        .else
+            btr     ecx, AMD_CU_NEED_TO_WAIT ; No need to wait on a single core CPU
+        .endif
+    .endif
+
+    bt     ecx, AMD_CU_NEED_TO_WAIT
+    .if (carry?)
+        .if (ah == dl)
+            ;; This is the highest numbered core on this socket -- wait on core 0
+            not     dh                  ; Flip the mask to determine local core 0's APIC ID
+            and     al, dh              ; AL = target APIC ID
+        .else
+            ;; All other cores (including core 0) wait on the next highest core.
+            ;; In this way, cores will halt in a cascading fashion down to 0.
+            inc     al
+        .endif
+
+        shl     eax, APIC20_APICID
+        and     bx, 0F000h
+        or      bx, APIC_CMD_HI_REG
+        mov     es:[ebx], eax           ; Set target APIC ID
+
+        ;; Use bits 23:16 as a timeout for unresponsive cores
+        ror     ecx, 8
+        mov     ch, 0FFh
+        stc
+        .while (carry?)
+            and     bx, 0F000h          ; EBX = LAPIC base, offset 0
+            or      bx, APIC_CMD_LO_REG
+            mov     eax, CMD_REG_TO_READ_DATA
+            mov     es:[ebx], eax       ; Fire remote read IPI
+            inc     ch                  ; Pre increment the timeout
+            stc
+            .while (carry?)
+                dec     ch              ; Check the timeout
+                jz      fam15_disable_stack_remote_read_exit   ; Branch if there is an unresponsive core
+                mov     eax, es:[ebx]
+                bt      eax, DELIVERY_STS_BIT
+            .endw
+            stc
+            .while (carry?)
+                mov     eax, es:[ebx]
+                and     eax, REMOTE_READ_STS
+                .if (eax == REMOTE_DELIVERY_PEND)
+                    dec     ch          ; Check the timeout
+                    jz      fam15_disable_stack_remote_read_exit   ; Branch if there is an unresponsive core
+                    stc
+                .else
+                    clc
+                .endif
+            .endw
+            .if (eax == REMOTE_DELIVERY_DONE)
+                and     bx, 0F000h      ; EBX = LAPIC base, offset 0
+                or      bl, APIC_REMOTE_READ_REG
+                mov     eax, es:[ebx]
+                .if (eax == APIC_MSG)
+                    clc
+                .else
+                    stc
+                .endif
+            .else
+                dec     ch              ; Check the timeout
+                jz      fam15_disable_stack_remote_read_exit   ; Branch if there is an unresponsive core
+                stc
+            .endif
+        .endw
+
+fam15_disable_stack_remote_read_exit:
+        rol     ecx, 8                  ; Restore ECX
+
+    .endif
+    bt      ecx, AMD_CU_RESTORE_ES
+    .if (carry?)
+        mov     es, cx
+    .endif
+    mov     edi, ecx                    ; EDI = CU flags
+    shr     edx, 16
+    mov     bx, dx                      ; Restore Extended Model, Model and Stepping
+
+    ;; Handshaking complete.  Continue tearing down CAR.
+    mov     ecx, LS_CFG                 ; MSR:C001_1020
+    .if (bx != 0)                       ; Is this OR A0?
+        _RDMSR
+        btr     eax, DIS_SS             ; Turn on Streaming store functionality
+        _WRMSR
+    .endif                              ; End workaround for errata 495 and 496
+
+    inc     ecx  ;IC_CFG                ; MSR:C001_1021
+    _RDMSR
+    btr     eax, IC_DIS_SPEC_TLB_RLD    ; Turn on speculative TLB reloads
+    _WRMSR
+
+    inc     ecx  ;DC_CFG                ; MSR:C001_1022
+    _RDMSR
+    btr     eax, DC_DIS_SPEC_TLB_RLD    ; Turn on speculative TLB reloads
+    .if (bx != 0)                       ; Is this OR A0?
+        btr     eax, DIS_HW_PF          ; Turn on hardware prefetches
+    .endif                              ; End workaround for erratum 498
+    _WRMSR
+
+    mov     ecx, HWCR                   ; MSR:C001_0015h
+    _RDMSR
+    btr     eax, INVD_WBINVD            ; Disable INVD -> WBINVD conversion
+    _WRMSR
+    invd                                ; Clear the cache tag RAMs
+
+    .if (bh == 01h)                     ; Is this TN?
+        ; Do TN enable stack special
+        mov     ecx, CU_CFG             ; MSR:C001_1023
+        _RDMSR
+        shr      eax, L2_FIRST_LOCKED_WAY
+        and      eax, 01Fh
+        .if (eax == 01Fh)               ; Check if way 15 of the L2 needs to be reserved
+            mov     ecx, CU_CFG         ; MSR:C001_1023
+            _RDMSR
+            btr     eax, L2_WAY_LOCK_EN
+            _WRMSR
+        .endif
+    .endif
+    ; Do Standard Family 15 work
+    mov     ecx, HWCR                   ; MSR:C001_0015h
+    _RDMSR
+    bts     eax, INVD_WBINVD            ; Turn on INVD -> WBINVD conversion
+    _WRMSR
+
+    mov     ecx, CU_CFG3                ; MSR:C001_102B
+    _RDMSR
+    bts     edx, (COMBINE_CR0_CD - 32)  ; Set CombineCr0Cd bit
+    _WRMSR
+
+    bt      edi, AMD_CU_SEND_INVD_MSG
+    .if (carry?)
+        ;; Non core zero needs to signal to core 0 to proceed
+        mov     ecx, APIC_BASE_ADDRESS
+        _RDMSR
+        mov     ebx, eax                ; EBX = LAPIC base
+        and     bx, 0F000h              ; EBX = LAPIC base, offset 0
+        or      bx, APIC_MSG_REG
+        mov     eax, APIC_MSG
+        mov     es:[ebx], eax           ; Signal for core 0 to complete CAR breakdown
+    .endif
+
+fam15_disable_stack_hook_exit:
+ENDM
+
+
+;---------------------------------------------------
+;
+; GET_NODE_ID_CORE_ID_F15 Macro - Stackless
+;
+;   Read family specific values to determine the node and core
+;   numbers for the core executing this code.
+;
+; Inputs:
+;     none
+; Outputs:
+;     ESI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above)
+;     MM5 = 32b pointer to family info structure
+; Destroyed:
+;       eax, ebx, ecx, edx, esi, mm5
+;---------------------------------------------------
+GET_NODE_ID_CORE_ID_F15 MACRO
+
+    local   node_core_f15_exit
+    local   end_of_f15h_data
+
+    IFNDEF FAM15H_INFO_STRUCT
+        jmp     end_of_f15h_data
+        ; Family 15h Info Structure:          L2Size,  #SharedCores, AllocMem, AllocExe, SzAddrBus, pad
+        FAM15H_INFO_STRUCT  CPU_FAMILY_INFO {  512,         2,          0,     0,         48,         0    }
+end_of_f15h_data:
+    ENDIF
+
+    cmp     si, -1                      ; Has node/core already been discovered?
+    jnz     node_core_f15_exit          ; Br if yes
+
+    AMD_CPUID   CPUID_MODEL
+    shr     eax, 20                     ; AL = cpu extended family
+    cmp     al, 06h                     ; Is this family 15h?
+    jnz     node_core_f15_exit          ; Br if no
+
+    LoadTableAddress(FAM15H_INFO_STRUCT)
+    movd    mm5, eax                    ; load pointer to Family Info Struc
+
+    xor     esi, esi                    ; Assume BSC, clear local flags
+    mov     ecx, APIC_BASE_ADDRESS      ; MSR:0000_001B
+    _RDMSR
+    bt      eax, APIC_BSC               ; Is this the BSC?
+    .if (carry?)
+        ; This is the BSP.
+        ; Enable routing tables on BSP (just in case the HT init code has not yet enabled them)
+        mov     eax, 8000C06Ch          ;   PCI address for D18F0x6C Link Initialization Control Register
+        mov     dx, 0CF8h
+        out     dx, eax
+        add     dx, 4
+        in      eax, dx
+        btr     eax, 0                  ;   Set LinkInitializationControl[RouteTblDis] = 0
+        out     dx, eax
+    .else                               ;
+        ; This is an AP. Routing tables have been enabled by the HT Init process.
+        ; Also, the MailBox register was set by the BSP during early init
+        ;   The Mailbox register content is formatted as follows:
+        ;         UINT32 Node:4;        // The node id of Core's node.
+        ;         UINT32 Socket:4;      // The socket of this Core's node.
+        ;         UINT32 Module:2;      // The internal module number for Core's node.
+        ;         UINT32 ModuleType:2;  // Single Module = 0, Multi-module = 1.
+        ;         UINT32 :20;           // Reserved
+        ;
+        mov     ecx, 0C0000408h         ;   Read the family 15h mailbox
+        _RDMSR                          ;      MC4_MISC1[63:32]
+        mov     si, dx                  ;   SI = raw mailbox contents (will extract node# from this)
+        shr     ebx, 24                 ;   BL = CPUID Fn0000_0001_EBX[LocalApicId]
+        mov     di, bx                  ;   DI = Initial APIC ID (will extract core# from this)
+
+        AMD_CPUID   AMD_CPUID_APIC      ;
+        shr     ch, 4                   ;   CH = ApicIdSize, #bits in APIC ID that show core#
+        inc     cl                      ;   CL = Number of enabled cores in the socket
+        mov     bx, cx
+
+        mov     ecx, NB_CFG
+        _RDMSR                          ;   EDX has InitApicIdCpuIdLo bit
+
+        mov     cl, bh                  ;   CL = APIC ID size
+        mov     al, 1                   ;   Convert APIC ID size to an AND mask
+        shl     al, cl                  ;   AL = 2^APIC ID size
+        dec     al                      ;   AL = mask for relative core number
+        xor     ah, ah                  ;   AX = mask for relative core number
+        bt      edx, (INIT_APIC_ID_CPU_ID_LO-32) ; InitApicIdCpuIdLo == 1?
+        .if (!carry?)                   ;   Br if yes
+            mov     ch, 8               ;     Calculate core number shift count
+            sub     ch, cl              ;     CH = core shift count
+            mov     cl, ch              ;
+            shr     di, cl              ;     Right justify core number
+        .endif                          ;
+        and     di, ax                  ;   DI = socket-relative core number
+
+        mov     cx, si                  ;   CX = raw mailbox value
+        shr     cx, 10                  ;   CL[1:0] = ModuleType or #nodes per socket (0-SCM, 1-MCM)
+        and     cl, 3                   ;   Isolate ModuleType
+        xor     bh, bh                  ;   BX = Number of enabled cores in the socket
+        shr     bx, cl                  ;   BX = Number of enabled cores per node
+        xor     dx, dx                  ;   Clear upper word for div
+        mov     ax, di                  ;   AX = socket-relative core number
+        div     bx                      ;   DX = node-relative core number
+        movzx   eax, si                 ;   Prepare return value
+        and     ax, 000Fh               ;   AX = node number
+        shl     ax, 8                   ;   [15:8]=node#
+        mov     al, dl                  ;   [7:0]=core# (relative to node)
+        mov     esi, eax                ;   ESI = node-relative core number
+    .endif                              ; end
+
+    ;
+    ;   determine if this core shares MTRRs
+    ;
+    mov     eax, 8000C580h              ; Compute Unit Status
+    mov     bx, si                      ; load node#(bh), core#(bl)
+    shl     bh, 3                       ; Move node# to PCI Dev# field
+    add     ah, bh                      ; Adjust PCI adress for node number
+    mov     dx, 0CF8h
+    out     dx, eax
+    add     dx, 4
+    in      eax, dx                     ; [3:0]=Enabled; [19:16]=DualCore
+
+                                        ; BL is MyCore#  , BH is primary flag
+    mov     cx, 06h                     ; Use CH as 'first of pair' core#
+    .while (cl > 0)
+        bt      eax, 0                  ;   Is pair enabled?
+        .if (carry?)                    ;
+            mov     bh, 01h             ;   flag core as primary
+            bt      eax, 16             ;   Is there a 2nd in the pair?
+            .if (carry?)                ;
+                .break .if (ch == bl)   ;     Does 1st match MyCore#?
+                inc     ch
+                xor     bh, bh          ;     flag core as NOT primary
+                .break .if (ch == bl)   ;     Does 2nd match MyCore#?
+            .else                       ;   No 2nd core
+                .break .if (ch == bl)   ;     Does 1st match MyCore#?
+            .endif
+            inc     ch
+        .endif
+        shr     eax, 1
+        dec     cl
+    .endw
+    .if (cl == 0)
+        ;Error - core# didn't match Compute Unit Status content
+        bts     esi, FLAG_CORE_NOT_IDENTIFIED
+        bts     esi, FLAG_IS_PRIMARY    ;   Set Is_Primary for unknowns
+    .endif
+    .if (bh != 0)                       ; Check state of primary for the matched core
+        bts     esi, FLAG_IS_PRIMARY    ;   Set shared flag into return value
+    .endif
+node_core_f15_exit:
+ENDM
+
+
+
diff --git a/src/vendorcode/amd/agesa/f15/cpcarmac.inc b/src/vendorcode/amd/agesa/f15/cpcarmac.inc
new file mode 100644
index 0000000000..24a607377c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/cpcarmac.inc
@@ -0,0 +1,457 @@
+;*****************************************************************************
+; AMD Generic Encapsulated Software Architecture
+;
+;  Workfile: cpcarmac.inc    $Revision:: 50472   $    $Date:: 2011-04-11 01:57:56 -0600 (Mon, 11 Apr 2011) $
+;
+; Description: Code to setup and break down cache-as-stack
+;
+;*****************************************************************************
+;
+; Copyright (C) 2012 Advanced Micro Devices, Inc.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in the
+;       documentation and/or other materials provided with the distribution.
+;     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+;       its contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*****************************************************************************
+
+    .XLIST
+    INCLUDE cpcar.inc
+    .LIST
+    .586P
+    .mmx
+
+;======================================================================
+; AMD_ENABLE_STACK:  Setup a stack
+;
+;   In:
+;       EBX  = Return address (preserved)
+;
+;   Out:
+;       SS:ESP - Our new private stack location
+;
+;       EAX = AGESA_STATUS
+;       EDX = Return status code if EAX contains a return code of higher
+;             severity than AGESA_SUCCESS
+;       ECX = Stack size in bytes
+;
+;   Requirements:
+;       * This routine presently is limited to a max of 64 processor cores
+;   Preserved:
+;       ebx ebp
+;   Destroyed:
+;       eax, ecx, edx, edi, esi, ds, es, ss, esp
+;       mmx0, mmx1, mmx5
+;
+;   Description:
+; Fixed MTRR address allocation to cores:
+; The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K.
+; There is a max of 1 BSP, 7 core0s and 56 other cores.
+; Although each core has it's own cache storage, they share the address space. Each core must
+; be assigned a private and unique address space for its stack. To support legacy systems,
+; the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved
+; for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.)
+;
+; 80000h                                        40000h                                      00000h
+;     +----------+----------+----------+----------+----------+----------+----------+----------+
+; 64K |          |          |          |          |          |          |          |          |  64K  ea
+;  ea +----------+----------+----------+----------+----------+----------+----------+----------+
+;     |                             MTRR 0000_0250 MTRRfix64K_00000                           |
+;     +----------+----------+----------+----------+----------+----------+----------+----------+
+;     |  7 ,  6  |  5 ,  4  |  3 ,  2  |  1 ,  0  |     0    |          |          |          | <-node
+;     |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 |     0    |          |          |          | <-core
+;     +----------+----------+----------+----------+----------+----------+----------+----------+
+;
+; C0000h                       B0000h                      A0000h                      90000h                      80000h
+;     +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+;16K  |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+; ea  +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+;     |              MTRR 0259 MTRRfix16K_A0000               |             MTRR 0258 MTRRfix16K_80000                |
+;     +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+;     | > Dis|play B|uffer |   <  |      |      |      |      |   7  |  6   |  5   |  4   |  3   |  2   |  1   |      | <-node
+;     | >   T| e  m |p o r |a r y |  B u |f f e |r   A |r e a<|   0  |  0   |  0   |  0   |  0   |  0   |  0   |      | <-core
+;     +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+;
+; E0000h                                            D0000h                                         C0000h
+;     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+; 4K  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  4K  ea
+;  ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+;     |  026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000  | 0269 MTRRfix4K_C8000  | 0268 MTRRfix4K_C0000  |
+;     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+;     |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  | >| V| I| D| E| O|  |B |I |O |S |  |A |r |e |a<|
+;     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+;
+; 100000h                                           F0000h                                          E0000h
+;     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+;     |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  4K  ea
+;     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+;     |  026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000  | 026D MTRRfix4K_E8000  | 026C MTRRfix4K_E0000  |
+;     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+;     | >|MA|IN| B|IO|S |RA|NG|E |  |  |  |  |  |  |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE|  |  |  |  |  |< |
+;     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+;======================================================================
+AMD_ENABLE_STACK MACRO
+  local AmdEnableStackExit
+
+;   Note that SS:ESP will be default stack.  Note that this stack
+;   routine will not be used after memory has been initialized.  Because
+;   of its limited lifetime, it will not conflict with typical PCI devices.
+    movd    mm0, ebx                    ; Put return address in a safe place
+    movd    mm1, ebp                    ; Save some other user registers
+
+    ; get node id and core id of current executing core
+    GET_NODE_ID_CORE_ID                 ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node)
+    ; Note: ESI[31:24] are used for flags:  Unrecognized Family,  Is_Primary core,  Stack already established
+
+    ; If we detected an unknown processor family or core combination, return AGESA_FATAL.
+    .if (esi & (1 SHL FLAG_UNKNOWN_FAMILY))
+      mov edx, CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY
+      mov eax, AGESA_FATAL
+      jmp AmdEnableStackExit
+    .elseif (esi & (1 SHL FLAG_CORE_NOT_IDENTIFIED))
+      mov edx, CPU_EVENT_CORE_NOT_IDENTIFIED
+      mov eax, AGESA_FATAL
+      jmp AmdEnableStackExit
+    .endif
+
+    ; determine if stack is already enabled. We are using the DefType MSR for this determination.
+    ; It is =0 after reset; CAR setup sets it to enable the MTRRs
+    mov     eax, cr0                    ; Is cache enabled? (CD or NW bit set)
+    CR0_MASK    TEXTEQU %((1 SHL CR0_CD) OR (1 SHL CR0_NW))
+    .if (!(eax & CR0_MASK))
+        mov     ecx, AMD_MTRR_DEFTYPE   ; MSR:0000_02FF
+        _RDMSR                          ; Are either of the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN)
+        MSR_MASK    TEXTEQU %((1 SHL MTRR_DEF_TYPE_EN)+(1 SHL MTRR_DEF_TYPE_FIX_EN))
+        .if (eax & MSR_MASK)
+            bts     esi, FLAG_STACK_REENTRY     ; indicate stack has already been initialized
+        .endif
+    .endif
+
+    ; Set node to map the first 16MB to node 0; 0000_0000 to 00FF_FFFF as DRAM
+    mov     ebx, esi                    ; Get my Node/Core info
+    xor     bl, bl
+    shl     bh, 3                       ; Isolate my node#, match alignment for PCI Dev#
+    mov     eax, 8000C144h              ; D18F1x44:DRAM Base/Limit; N is Base, N+4 is Limit
+    add     ah, bh
+    mov     ebx, eax                    ; Save PCI address for Base/Limit pair
+
+    mov     dx, 0CF8h
+    out     dx, eax
+    add     dx, 4
+    xor     eax, eax                    ; Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB)
+    out     dx, eax                     ; DRAM Limit = node0, no interleave
+
+    mov     eax, ebx
+    sub     eax, 4                      ; Now point to the Base register
+    mov     dx, 0CF8h
+    out     dx, eax
+    add     dx, 4
+    mov     eax, 00000003h              ; Set the read and write enable bits
+    out     dx, eax                     ; DRAM Base = 0x0000, R/W
+
+    AMD_ENABLE_STACK_FAMILY_HOOK
+
+    ; Init CPU MSRs for our init routines
+    mov     ecx, MTRR_SYS_CFG           ; SYS_CFG
+    _RDMSR
+    bts     eax, MTRR_FIX_DRAM_MOD_EN   ; Turn on modification enable bit
+    _WRMSR
+
+    mov     eax, esi
+    bt      eax, FLAG_STACK_REENTRY     ; Is this a 2nd entry?
+    .if (!carry?)                       ;   On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP
+        bt      eax, FLAG_IS_PRIMARY    ;   Is this core the primary in a compute unit?
+        .if (carry?)                    ;     Families using shared groups do not need to clear the MTRRs since that is done at power-on reset
+            ;  Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores
+            ; Clear all variable and Fixed MTRRs for non-shared cores
+            mov     ecx, AMD_MTRR_VARIABLE_BASE0
+            xor     eax, eax
+            xor     edx, edx
+            .while (cl != 10h)                  ; Variable MTRRphysBase[n] and MTRRphysMask[n]
+                _WRMSR
+                inc     cl
+            .endw
+            mov     cx, AMD_MTRR_FIX64k_00000   ; MSR:0000_0250
+            _WRMSR
+            mov     cx, AMD_MTRR_FIX16k_80000   ; MSR:0000_0258
+            _WRMSR
+            mov     cx, AMD_MTRR_FIX16k_A0000   ; MSR:0000_0259
+            _WRMSR
+            mov     cx, AMD_MTRR_FIX4k_C0000    ; Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000
+            .while (cl != 70h)
+                _WRMSR
+                inc     cl
+            .endw
+
+            ; Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init.
+            ;  - not strictly needed since the FixedMTRRs take presedence.
+            mov     eax, (16 * 1024 * 1024)
+            mov     ecx, TOP_MEM                ; MSR:C001_001A
+            _WRMSR
+        .endif                          ;   End Is_Primary
+    .endif                              ; End Stack_ReEntry
+
+    ; Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores
+    xor     eax, eax
+    xor     edx, edx
+    mov     ecx, IORR_BASE              ; MSR:C001_0016 - 0019
+    .while (cl != 1Ah)
+        _WRMSR
+        inc     cl
+    .endw
+    mov     ecx, TOP_MEM2               ; MSR:C001_001D
+    _WRMSR
+
+    ; setup MTTRs for stacks
+    ;   A speculative read can be generated by a speculative fetch mis-aligned in a code zone
+    ;    or due to a data zone being interpreted as code. When a speculative read occurs outside a
+    ;    controlled region (intentionally used by software), it could cause an unwanted cache eviction.
+    ;   To prevent speculative reads from causing an eviction, the unused cache ranges are set
+    ;    to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs.
+    ;    Note: some core stack regions will share an MTRR since the control granularity is much
+    ;    larger than the allocated stack zone. The allocation algorithm must account for this 'extra'
+    ;    space covered by the MTRR when parseling out cache space for the various uses. In some cases
+    ;    this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c
+    ;
+    ; Outcome of this block is that:   (Note the MTRR map at the top of the file)
+    ;   ebp - start address of stack block
+    ;   ebx - [31:16] - MTRR MSR address
+    ;       - [15:8]  - slot# in MTRR register
+    ;       - [7:0]   - block size in #4K blocks
+    ; review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node)
+    ;
+
+    mov     eax, esi                    ; Load Flags, node, core
+    .if (al == 0)                       ; Is a core 0?
+        .if (ah == 0)                   ; Is Node 0? (BSP)
+            ; Is BSP, assign a 64K stack; for F10/F12, foce to a 32K stack
+            mov     ebx, ((AMD_MTRR_FIX64k_00000 SHL 16) + (3 SHL 8) + (BSP_STACK_SIZE_64K  / 1000h))
+            bt      eax, FLAG_FORCE_32K_STACK
+            .if (carry?)
+                mov     ebx, ((AMD_MTRR_FIX64k_00000 SHL 16) + (3 SHL 8) + (BSP_STACK_SIZE_32K  / 1000h))
+            .endif
+            mov     ebp, BSP_STACK_BASE_ADDR
+        .else   ; node 1 to 7, core0
+            ; Is a Core0 of secondary node, assign 16K stacks
+            mov     bx, AMD_MTRR_FIX16k_80000
+            shl     ebx, 16             ;
+            mov     bh, ah              ; Node# is used as slot#
+            mov     bl, (CORE0_STACK_SIZE / 1000h)
+            mov     al, ah              ; Base = (Node# * Size);
+            mul     bl                  ;
+            movzx   eax, ax             ;
+            shl     eax, 12             ; Expand back to full byte count (* 4K)
+            add     eax, CORE0_STACK_BASE_ADDR
+            mov     ebp, eax
+        .endif
+    .else    ;core 1 thru core 7
+        ; Is core 1-7 of any node, assign 4K stacks
+        mov     al, 8                   ; CoreIndex = ( (Node# * 8) ...
+        mul     ah                      ;
+        mov     bx, si                  ;
+        add     al, bl                  ;         ...  + Core#);
+
+        mov     bx, AMD_MTRR_FIX64k_00000
+        shl     ebx, 16                 ;
+        mov     bh, al                  ; Slot# = (CoreIndex / 16) + 4;
+        shr     bh, 4                   ;
+        add     bh, 4                   ;
+        mov     bl, (CORE1_STACK_SIZE / 1000h)
+
+        mul     bl                      ; Base = ( (CoreIndex * Size) ...
+        movzx   eax, ax                 ;
+        shl     eax, 12                 ; Expand back to full byte count (* 4K)
+        add     eax, CORE1_STACK_BASE_ADDR ;     ...   + Base_Addr);
+        mov     ebp, eax
+    .endif
+
+    ; Now set the MTRR. Add this to already existing settings (don't clear any MTRR)
+    mov     edi, WB_DRAM_TYPE           ; Load Cache type in 1st slot
+    mov     cl, bh                      ; ShiftCount =  ((slot#   ...
+    and     cl, 03h                     ;   ...  % 4)             ...
+    shl     cl, 3                       ;   ...  * 8);
+    shl     edi, cl                     ; Cache type is now in correct position
+    ror     ebx, 16                     ; Get the MTRR address
+    movzx   ecx, bx                     ;
+    rol     ebx, 16                     ; Put slot# & size back in BX
+    _RDMSR                              ; Read-modify-write the MSR
+    .if (bh < 4)                        ; Is value in lower or upper half of MSR?
+        or      eax, edi                ;
+    .else                               ;
+        or      edx, edi                ;
+    .endif                              ;
+    _WRMSR                              ;
+
+    ; Enable MTRR defaults as UC type
+    mov     ecx, AMD_MTRR_DEFTYPE       ; MSR:0000_02FF
+    _RDMSR                              ; Read-modify-write the MSR
+    bts     eax, MTRR_DEF_TYPE_EN       ; MtrrDefTypeEn
+    bts     eax, MTRR_DEF_TYPE_FIX_EN   ; MtrrDefTypeFixEn
+    _WRMSR
+
+    ; Close the modification window on the Fixed MTRRs
+    mov     ecx, MTRR_SYS_CFG           ; MSR:0C001_0010
+    _RDMSR
+    bts     eax, MTRR_FIX_DRAM_EN       ; MtrrFixDramEn
+    bts     eax, MTRR_VAR_DRAM_EN       ; variable MTRR enable bit
+    btr     eax, MTRR_FIX_DRAM_MOD_EN   ; Turn off modification enable bit
+    _WRMSR
+
+    ; Enable caching in CR0
+    mov     eax, CR0                    ; Enable WT/WB cache
+    btr     eax, CR0_PG                 ; Make sure paging is disabled
+    btr     eax, CR0_CD                 ; Clear CR0 NW and CD
+    btr     eax, CR0_NW
+    mov     CR0, eax
+
+    ; Use the Stack Base & size to calculate SS and ESP values
+    ; review:
+    ;       esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+    ;       ebp - start address of stack block
+    ;       ebx - [31:16] - MTRR MSR address
+    ;           - [15:8]  - slot# in MTRR register
+    ;           - [7:0]   - block size in #4K blocks
+    ;
+    mov     esp, ebp                    ; Initialize the stack pointer
+    mov     edi, esp                    ; Copy the stack start to edi
+    movzx   bx, bl
+    movzx   ebx, bx                     ; Clear upper ebx, don't need MSR addr anymore
+    shl     ebx, 12                     ; Make size full byte count (* 4K)
+    add     esp, ebx                    ; Set the Stack Pointer as full linear address
+    sub     esp, 4
+    ;
+    ; review:
+    ;       esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+    ;       edi - 32b start address of stack block
+    ;       ebx - size of stack block
+    ;       esp - 32b linear stack pointer
+    ;
+
+    ; Determine mode for SS base;
+    mov     ecx, CR0                    ; Check for 32-bit protect mode
+    bt      ecx, CR0_PE                 ;
+    .if (!carry?)                       ; PE=0 means real mode
+        mov     cx, cs                  ;
+        .if (cx >= 0D000h)              ; If CS >= D000, it's a real mode segment. PM selector would be 08-> 1000
+            ; alter SS:ESP for 16b Real Mode:
+            mov     eax, edi            ;
+            shr     eax, 4              ;   Create a Real Mode segment for ss, ds, es
+            mov     ss, ax              ;
+            mov     ds, ax              ;
+            mov     es, ax              ;
+            shl     eax, 4              ;
+            sub     edi, eax            ;   Adjust the clearing pointer for Seg:Offset mode
+            mov     esp, ebx            ;   Make SP an offset from SS
+            sub     esp, 4              ;
+        .endif                          ; endif
+    ; else
+    ;   Default is to use Protected 32b Mode
+    .endif
+    ;
+    ; Clear The Stack
+    ;   Now that we have set the location and the MTRRs, initialize the cache by
+    ;   reading then writing to zero all of the stack area.
+    ; review:
+    ;       ss  - Stack base
+    ;       esp - stack pointer
+    ;       ebx - size of stack block
+    ;       esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+    ;       edi -  address of start of stack block
+    ;
+    shr     ebx, 2                      ;
+    mov     cx, bx                      ; set cx for size count of DWORDS
+    ; Check our flags - Don't clear an existing stack
+    .if ( !(esi & (1 SHL FLAG_STACK_REENTRY)) )
+        cld
+        mov     esi, edi
+        rep     lods DWORD PTR [esi]    ; Pre-load the range
+        xor     eax, eax
+        mov     cx, bx
+        mov     esi, edi                ; Preserve base for push on stack
+        rep     stos DWORD PTR [edi]    ; Clear the range
+        mov     DWORD PTR [esp], 0ABCDDCBAh ; Put marker in top stack dword
+        shl     ebx, 2                  ; Put stack size and base
+        push    ebx                     ;  in top of stack
+        push    esi
+
+        mov     ecx, ebx                ; Return size of stack in bytes
+        mov     eax, AGESA_SUCCESS      ; eax = AGESA_SUCCESS : no error return code
+    .else
+        movzx   ecx, cx
+        shl     ecx, 2                  ; Return size of stack, in bytes
+        mov     edx, CPU_EVENT_STACK_REENTRY
+        mov     eax, AGESA_WARNING      ; eax = AGESA_WARNING (Stack has already been set up)
+    .endif
+
+AmdEnableStackExit:
+    movd        ebx, mm0                ; Restore return address
+    movd        ebp, mm1
+ENDM
+
+;======================================================================
+; AMD_DISABLE_STACK:  Destroy the stack inside the cache. This routine
+;                     should only be executed on the BSP
+;
+;   In:
+;       none
+;
+;   Out:
+;       EAX = AGESA_SUCCESS
+;
+;   Preserved:
+;       ebx
+;   Destroyed:
+;       eax, ecx, edx, esp, mmx5
+;======================================================================
+AMD_DISABLE_STACK MACRO
+
+    mov     esp, ebx                    ; Save return address
+
+    ; get node/core/flags of current executing core
+    GET_NODE_ID_CORE_ID                 ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node)
+
+    ; Turn on modification enable bit
+    mov     ecx, MTRR_SYS_CFG           ; MSR:C001_0010
+    _RDMSR
+    bts     eax, MTRR_FIX_DRAM_MOD_EN   ; Enable modifications
+    _WRMSR
+
+    ; Set lower 640K MTRRs for Write-Back memory caching
+    mov     ecx, AMD_MTRR_FIX64k_00000
+    mov     eax, 1E1E1E1Eh
+    mov     edx, eax
+    _WRMSR                              ; 0 - 512K = WB Mem
+    mov     ecx, AMD_MTRR_FIX16k_80000
+    _WRMSR                              ; 512K - 640K = WB Mem
+
+    ; Turn off modification enable bit
+    mov     ecx, MTRR_SYS_CFG           ; MSR:C001_0010
+    _RDMSR
+    btr     eax, MTRR_FIX_DRAM_MOD_EN   ; Disable modification
+    _WRMSR
+
+    AMD_DISABLE_STACK_FAMILY_HOOK       ; Re-Enable 'normal' cache operations
+
+    mov     ebx, esp                    ; restore return address (ebx)
+    xor     eax, eax
+
+ENDM
diff --git a/src/vendorcode/amd/agesa/f15/errno.h b/src/vendorcode/amd/agesa/f15/errno.h
new file mode 100644
index 0000000000..2d90c8dfe9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/errno.h
@@ -0,0 +1,38 @@
+/*
+ *****************************************************************************
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+// this dummy errno.h prevents an agesa  build failure when the gcc
+// cross compiler target is i386-elf. In this case, mm_malloc.h
+// includes errno.h, but the gcc cross compiler does not supply it.
+
+extern int errno;
+#define EINVAL 1
diff --git a/src/vendorcode/amd/agesa/f15/gcccar.inc b/src/vendorcode/amd/agesa/f15/gcccar.inc
new file mode 100644
index 0000000000..07e32850e8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f15/gcccar.inc
@@ -0,0 +1,1612 @@
+/*
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/******************************************************************************
+* AMD Generic Encapsulated Software Architecture
+*
+* $Workfile:: GccCar.inc    $Revision:: 32932   $
+*
+* Description: GccCar.inc - AGESA cache-as-RAM setup Include File for GCC complier
+*
+******************************************************************************/
+
+.altmacro
+
+BSP_STACK_BASE_ADDR     =       0x30000         /* Base address for primary cores stack   */
+BSP_STACK_SIZE          =       0x10000         /* 64KB for BSP core                      */
+CORE0_STACK_BASE_ADDR   =       0x80000         /* Base address for primary cores stack   */
+CORE0_STACK_SIZE        =       0x4000          /* 16KB for primary cores                 */
+CORE1_STACK_BASE_ADDR   =       0x40000         /* Base address for AP cores              */
+CORE1_STACK_SIZE        =       0x1000          /* 4KB for each AP cores                  */
+
+APIC_BASE_ADDRESS       =       0x0000001B
+  APIC_BSC              =       8               /* Boot Strap Core  */
+
+AMD_MTRR_VARIABLE_BASE0  =      0x0200
+AMD_MTRR_VARIABLE_BASE6  =      0x020C
+AMD_MTRR_FIX64k_00000    =      0x0250
+AMD_MTRR_FIX16k_80000    =      0x0258
+AMD_MTRR_FIX16k_A0000    =      0x0259
+AMD_MTRR_FIX4k_C0000     =      0x0268
+AMD_MTRR_FIX4k_C8000     =      0x0269
+AMD_MTRR_FIX4k_D0000     =      0x026A
+AMD_MTRR_FIX4k_D8000     =      0x026B
+AMD_MTRR_FIX4k_E0000     =      0x026C
+AMD_MTRR_FIX4k_E8000     =      0x026D
+AMD_MTRR_FIX4k_F0000     =      0x026E
+AMD_MTRR_FIX4k_F8000     =      0x026F
+
+AMD_MTRR_DEFTYPE         =      0x02FF
+    WB_DRAM_TYPE         =      0x1E             /* MemType - memory type */
+    MTRR_DEF_TYPE_EN     =      11               /* MtrrDefTypeEn - variable and fixed MTRRs default enabled */
+    MTRR_DEF_TYPE_FIX_EN =      10               /* MtrrDefTypeEn - fixed MTRRs default enabled */
+
+HWCR                     =      0x0C0010015      /* Hardware Configuration                                                                                                                                       */
+    INVD_WBINVD          =      0x04             /* INVD to WBINVD conversion */
+
+IORR_BASE                =      0x0C0010016      /* IO Range Regusters Base/Mask, 2 pairs */
+                                                 /*  uses 16h - 19h                                                                                                                                                             */
+TOP_MEM                  =      0x0C001001A      /* Top of Memory                                                                                                                                                                                */
+TOP_MEM2                 =      0x0C001001D      /* Top of Memory2                                                                                                                                                                       */
+
+LS_CFG                   =      0x0C0011020      /* Load-Store Configuration                                                                                                                             */
+    DIS_SS               =     28                /* Family 10h,12h,15h:Disable Streng Store functionality */
+    DIS_STREAM_ST        =     28                /* Family 14h:DisStreamSt - Disable Streaming Store functionality */
+
+IC_CFG                   =      0x0C0011021      /* Instruction Cache Config Register  */
+    IC_DIS_SPEC_TLB_RLD  =      9                /*   Disable speculative TLB reloads  */
+    DIS_IND              =      14               /*   Family 10-14h:Disable Indirect Branch Predictor */
+    DIS_I_CACHE          =      14               /*   Family 15h:DisICache - Disable Indirect Branch Predictor */
+
+DC_CFG                   =      0x0C0011022      /* Data Cache Configuration                                                                                                                                   */
+    DC_DIS_SPEC_TLB_RLD      =  4                /*   Disable speculative TLB reloads */
+    DIS_CLR_WBTOL2_SMC_HIT   =  8                /*   self modifying code check buffer bit */
+    DIS_HW_PF                =  13               /*   Hardware prefetches bit                                                                                                                                    */
+
+DE_CFG                   =      0x0C0011029      /* Decode Configuration */
+    CL_FLUSH_SERIALIZE   =      23               /*   Family 12h,15h: CL Flush Serialization */
+
+BU_CFG2                  =      0x0C001102A      /* Family 10h: Bus Unit Configuration 2 */
+CU_CFG2                  =      0x0C001102A      /* Family 15h: Combined Unit Configuration 2 */
+    F10_CL_LINES_TO_NB_DIS  =   15               /*   ClLinesToNbDis - allows WP code to be cached in L2 */
+    IC_DIS_SPEC_TLB_WR      =   35               /*   IcDisSpecTlbWr - ITLB speculative writes */
+
+CU_CFG3                  =      0x0C001102B      /* Combined Unit Configuration 3 */
+    COMBINE_CR0_CD       =      49               /*   Combine CR0.CD for both cores of a compute unit */
+
+
+CR0_PE                  = 1           # Protection Enable
+CR0_NW                  = 29          # Not Write-through
+CR0_CD                  = 30          # Cache Disable
+CR0_PG                  = 31          # Paging Enable
+
+/* CPUID Functions */
+
+CPUID_MODEL              =      1
+AMD_CPUID_FMF            =      0x80000001       /* Family Model Features information */
+AMD_CPUID_APIC           =      0x80000008       /* Long Mode and APIC info., core count */
+
+NB_CFG                   =      0x0C001001F      /* Northbridge Configuration Register */
+    INIT_APIC_ID_CPU_ID_LO    = 54               /*  InitApicIdCpuIdLo - is core# in high or low half of APIC ID? */
+
+MTRR_SYS_CFG             =      0x0C0010010      /* System Configuration Register */
+  CHX_TO_DIRTY_DIS       =      16               /*   ChxToDirtyDis    Change to dirty disable  */
+  SYS_UC_LOCK_EN         =      17               /*   SysUcLockEn      System lock command enable */
+  MTRR_FIX_DRAM_EN       =      18               /*   MtrrFixDramEn    MTRR fixed RdDram and WrDram attributes enable */
+  MTRR_FIX_DRAM_MOD_EN   =      19               /*   MtrrFixDramModEn MTRR fixed RdDram and WrDram modification enable */
+  MTRR_VAR_DRAM_EN       =      20               /*   MtrrVarDramEn    MTRR variable DRAM enable */
+  MTRR_TOM2_EN           =      21               /*   MtrrTom2En       MTRR top of memory 2 enable */
+
+PERF_CONTROL3            =      0x0C0010003      /* Performance event control three */
+    PERF_CONTROL3_RESERVE_L  =  0x00200000       /* Preserve the reserved bits */
+    PERF_CONTROL3_RESERVE_H  =  0x0FCF0          /* Preserve the reserved bits */
+    CONFIG_EVENT_L           =  0x0F0E2          /* All cores with level detection */
+    CONFIG_EVENT_H           =  4                /* Increment count by number of event */
+                                                 /* occured in clock cycle */
+    EVENT_ENABLE             =  22               /* Enable the event */
+PERF_COUNTER3            =      0x0C0010007      /* Performance event counter three */
+
+# Local use flags, in upper most byte if ESI
+FLAG_UNKNOWN_FAMILY     = 24          # Signals that the family# of the installed processor is not recognized
+FLAG_STACK_REENTRY      = 25          # Signals that the environment has made a re-entry (2nd) call to set up the stack
+FLAG_IS_PRIMARY         = 26          # Signals that this core is the primary within the comoute unit
+
+CR0_MASK    = ((1 << CR0_CD) | (1 << CR0_NW))
+MSR_MASK    = ((1 << MTRR_DEF_TYPE_EN)+(1 << MTRR_DEF_TYPE_FIX_EN))
+
+/****************************************************************************
+ *
+ *                      CPU MACROS - PUBLIC
+ *
+ ****************************************************************************/
+.macro   _WRMSR
+        .byte 0x0f, 0x30
+.endm
+
+.macro  _RDMSR
+        .byte   0x0F, 0x32
+.endm
+
+.macro AMD_CPUID arg0
+  .ifb \arg0
+    mov   $0x1, %eax
+    .byte 0x0F, 0x0A2                     /* Execute instruction */
+    bswap %eax
+    xchg  %ah, %al                        /* Ext model in al now */
+    rol   $0x08, %eax                     /* Ext model in ah, model in al */
+    and   $0x0FFCF, ax                    /* Keep 23:16, 7:6, 3:0 */
+  .else
+    mov   \arg0, %eax
+    .byte 0x0F, 0x0A2
+  .endif
+.endm
+
+/****************************************************************************
+*
+* AMD_ENABLE_STACK_FAMILY_HOOK Macro - Stackless
+*
+*   Set any family specific controls needed to enable the use of
+*   cache as general storage before main memory is available.
+*
+* Inputs:
+*       none
+* Outputs:
+*       none
+ ****************************************************************************/
+.macro  AMD_ENABLE_STACK_FAMILY_HOOK
+
+    AMD_ENABLE_STACK_FAMILY_HOOK_F10
+    AMD_ENABLE_STACK_FAMILY_HOOK_F12
+    AMD_ENABLE_STACK_FAMILY_HOOK_F14
+    AMD_ENABLE_STACK_FAMILY_HOOK_F15
+.endm
+
+/****************************************************************************
+*
+* AMD_DISABLE_STACK_FAMILY_HOOK Macro - Stackless
+*
+*   Return any family specific controls to their 'standard'
+*   settings for using cache with main memory.
+*
+* Inputs:
+*       none
+* Outputs:
+*       none
+ ****************************************************************************/
+.macro  AMD_DISABLE_STACK_FAMILY_HOOK
+
+    AMD_DISABLE_STACK_FAMILY_HOOK_F10
+    AMD_DISABLE_STACK_FAMILY_HOOK_F12
+    AMD_DISABLE_STACK_FAMILY_HOOK_F14
+    AMD_DISABLE_STACK_FAMILY_HOOK_F15
+
+.endm
+
+/****************************************************************************
+*
+* GET_NODE_ID_CORE_ID Macro - Stackless
+*
+*   Read family specific values to determine the node and core
+*   numbers for the core executing this code.
+*
+* Inputs:
+*     none
+* Outputs:
+*     SI[7:0] = Core# (0..N, relative to node)
+*     SI[15:8]= Node# (0..N)
+*     SI[23:16]= reserved
+*     SI[24]=   flag: 1=Family Unrecognized
+*     SI[25]=   flag: 1=Interface re-entry call
+*     SI[26]=   flag: 1=Core is primary of compute unit
+*     SI[31:27]= reserved, =0
+****************************************************************************/
+.macro  GET_NODE_ID_CORE_ID
+    LOCAL  node_core_exit
+
+    mov     $-1, %si
+    GET_NODE_ID_CORE_ID_F10
+    GET_NODE_ID_CORE_ID_F12
+    GET_NODE_ID_CORE_ID_F14
+    GET_NODE_ID_CORE_ID_F15
+    /*
+     * Check for unrecognized Family
+     */
+    cmp     $-1, %si                      # Has family (node/core) already been discovered?
+    jnz     node_core_exit              # Br if yes
+
+   mov     $((1 << FLAG_UNKNOWN_FAMILY)+(1 << FLAG_IS_PRIMARY)), %esi # No, Set error code, Only let BSP continue
+
+    mov     $APIC_BASE_ADDRESS, %ecx      # MSR:0000_001B
+    _RDMSR
+    bt      $APIC_BSC, %eax               # Is this the BSC?
+    jc      node_core_exit              # Br if yes
+    hlt                                 # Kill APs
+node_core_exit:
+
+.endm
+
+/****************************************************************************
+##                      Family 10h MACROS
+##***************************************************************************
+#---------------------------------------------------
+#
+# AMD_ENABLE_STACK_FAMILY_HOOK_F10 Macro - Stackless
+#
+#   Set any family specific controls needed to enable the use of
+#   cache as general storage before main memory is available.
+#
+# Inputs:
+#       ESI - node#, core#, flags from GET_NODE_ID_CORE_ID
+# Outputs:
+#       none
+#
+# Family 10h requirements (BKDG section 2.3.3):
+#   * Paging disabled
+#   * MSRC001_0015[INVDWBINVD]=0
+#   * MSRC001_1021[DIS_IND]=1
+#   * MSRC001_1021[DIS_SPEC_TLB_RLD]=1
+#   * MSRC001_1022[DIS_SPEC_TLB_RLD]=1
+#   * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=1
+#   * MSRC001_1022[DIS_HW_PF]=1
+#   * MSRC001_102A[IcDisSpecTlbWr]=1
+#   * MSRC001_102A[ClLinesToNbDis]=1
+#   * No INVD or WBINVD, no exceptions, page faults or interrupts
+****************************************************************************/
+.macro AMD_ENABLE_STACK_FAMILY_HOOK_F10
+    LOCAL   fam10_enable_stack_hook_exit
+
+    AMD_CPUID   $CPUID_MODEL
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $0x01, %al                      # Is this family 10h?
+    jnz     fam10_enable_stack_hook_exit # Br if no
+
+    mov     $DC_CFG, %ecx                 # MSR:C001_1022
+    _RDMSR
+    bts     $DC_DIS_SPEC_TLB_RLD, %eax     # Turn on Disable speculative DTLB reloads bit
+    bts     $DIS_CLR_WBTOL2_SMC_HIT, %eax  # Turn on Disable the self modifying code check buffer bit
+    bts     $DIS_HW_PF, %eax               # Turn on Disable hardware prefetches bit
+    _WRMSR
+
+    dec     %cx                          # MSR:C001_1021
+    _RDMSR
+    bts     $IC_DIS_SPEC_TLB_RLD, %eax     # Turn on Disable speculative TLB reloads bit
+    bts     $DIS_IND, %eax                 # Turn on Disable indirect branch predictor
+    _WRMSR
+
+    mov     $BU_CFG2, %ecx                # MSR C001_102A
+    _RDMSR
+    bts     $F10_CL_LINES_TO_NB_DIS, %eax   # Allow BIOS ROM to be cached in the IC
+    bts     $(IC_DIS_SPEC_TLB_WR-32), %edx  #Disable speculative writes to the ITLB
+    _WRMSR
+
+    mov     $HWCR, %ecx                    # MSR C001_0015
+    _RDMSR
+    bt      $FLAG_STACK_REENTRY, %esi                 # Check if stack has already been set
+    jc      fam10_skipClearingBit4
+    btr     $INVD_WBINVD, %eax             # disable INVD -> WBINVD conversion
+    _WRMSR
+
+fam10_skipClearingBit4:
+    mov %esi, %eax                         # load core#
+    or %al, %al                       # If (BSP)
+    jne  fam10_enable_stack_hook_exit
+    mov     $PERF_COUNTER3, %ecx       #   Select performance counter three
+                                        #   to count number of CAR evictions
+    xor     %eax, %eax                #   Initialize the lower part of the counter to zero
+    xor     %edx, %edx                #   Initializa the upper part of the counter to zero
+    _WRMSR                          #   Save it
+    mov     $PERF_CONTROL3, %ecx      #   Select the event control three
+    _RDMSR                          #   Get the current setting
+    and     $PERF_CONTROL3_RESERVE_L, %eax   # Preserve the reserved bits
+    or      $CONFIG_EVENT_L, %eax      #   Set the lower part of event register to
+                                        #   select CAR Corruption occurred by any cores
+    and     $PERF_CONTROL3_RESERVE_H, %dx   # Preserve the reserved bits
+    or      $CONFIG_EVENT_H, %dx       #   Set the upper part of event register
+    _WRMSR                          #   Save it
+    bts     $EVENT_ENABLE, %eax        #   Enable it
+    _WRMSR                          #   Save it
+
+fam10_enable_stack_hook_exit:
+.endm
+
+/****************************************************************************
+*
+* AMD_DISABLE_STACK_FAMILY_HOOK_F10 Macro - Stackless
+*
+*   Return any family specific controls to their 'standard'
+*   settings for using cache with main memory.
+*
+* Inputs:
+*       ESI - [31:24] flags; [15,8]= Node#; [7,0]= core#
+* Outputs:
+*       none
+*
+* Family 10h requirements:
+*   * INVD or WBINVD
+*   * MSRC001_0015[INVD_WBINVD]=1
+*   * MSRC001_1021[DIS_IND]=0
+*   * MSRC001_1021[DIS_SPEC_TLB_RLD]=0
+*   * MSRC001_1022[DIS_SPEC_TLB_RLD]=0
+*   * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=0
+*   * MSRC001_1022[DIS_HW_PF]=0
+*   * MSRC001_102A[IcDisSpecTlbWr]=0
+*   * MSRC001_102A[ClLinesToNbDis]=0
+*****************************************************************************/
+
+.macro  AMD_DISABLE_STACK_FAMILY_HOOK_F10
+    LOCAL   fam10_disable_stack_hook_exit
+
+    AMD_CPUID   $CPUID_MODEL
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $0x01, %al                     # Is this family 10h?
+    jnz     fam10_disable_stack_hook_exit # Br if no
+
+    mov     $DC_CFG, %ecx                 # MSR:C001_1022
+    _RDMSR
+    btr     $DC_DIS_SPEC_TLB_RLD, %eax    # Enable speculative TLB reloads
+    btr     $DIS_CLR_WBTOL2_SMC_HIT, %eax # Allow self modifying code check buffer
+    btr     $DIS_HW_PF, %eax              # Allow hardware prefetches
+    _WRMSR
+
+    dec     %cx                          # MSR:C001_1021
+    _RDMSR
+    btr     $DIS_IND, %eax                # Turn on indirect branch predictor
+    btr     $IC_DIS_SPEC_TLB_RLD, %eax    # Turn on speculative TLB reloads
+    _WRMSR
+
+    mov     $BU_CFG2, %ecx                # MSR:C001_102A
+    _RDMSR
+/*
+ * BTS error if SBIOS `allows WP code to be cached', but copying
+ * ramstage/payloads from ROM to RAM will be very slow if disable it here.
+ *
+ * TODO: disable `allows WP code to be cached' after the ROM to RAM copying.
+ */
+//    btr     $F10_CL_LINES_TO_NB_DIS, %eax  # Return L3 to normal mode
+    btr     $(IC_DIS_SPEC_TLB_WR-32), %edx #Re-enable speculative writes to the ITLB
+    _WRMSR
+
+    #--------------------------------------------------------------------------
+    # Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    #--------------------------------------------------------------------------
+
+    mov     $HWCR, %ecx                    # MSR:0000_0015
+    _RDMSR
+    mov     %ax, %bx                      # Save INVD -> WBINVD bit
+    btr    $INVD_WBINVD, %eax            # Disable INVD -> WBINVD conversion for the invd instruction.
+    _WRMSR
+    wbinvd                                # Clear the cache tag RAMs
+    mov    %bx, %ax                      # Restore INVD -> WBINVD bit
+    _WRMSR
+
+    #--------------------------------------------------------------------------
+    # End critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    #--------------------------------------------------------------------------
+
+    mov     $PERF_CONTROL3, %ecx          # Select the event control three
+    _RDMSR                              # Retrieve the current value
+    btc     $EVENT_ENABLE, %eax           # Is event enable, complement it as well
+    jnc     fam10_disable_stack_hook_exit # No
+    cmp     $CONFIG_EVENT_L, %ax          # Is the lower part of event set to capture the CAR Corruption
+    jne     fam10_disable_stack_hook_exit # No
+    cmp     $CONFIG_EVENT_H, %dl        # Is the upper part of event set to capture the CAR Corruption
+    jne     fam10_disable_stack_hook_exit # No
+    _WRMSR                              # Disable the event
+
+fam10_disable_stack_hook_exit:
+.endm
+
+/****************************************************************************
+*
+* GET_NODE_ID_CORE_ID_F10 Macro - Stackless
+*
+*   Read family specific values to determine the node and core
+*   numbers for the core executing this code.
+*
+* Inputs:
+*     none
+* Outputs:
+*     SI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above)
+*****************************************************************************/
+.macro  GET_NODE_ID_CORE_ID_F10
+
+    LOCAL   node_core_f10_exit
+    LOCAL   node_core_f10_AP
+
+    cmp     $-1, %si                      # Has node/core already been discovered?
+    jnz     node_core_f10_exit          # Br if yes
+
+    AMD_CPUID   $CPUID_MODEL
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $0x01, %al                     # Is this family 10h?
+    jnz     node_core_f10_exit          # Br if no
+
+    xor     %esi, %esi                    # Assume BSC, clear flags
+    mov     $APIC_BASE_ADDRESS, %ecx      # MSR:0000_001B
+    _RDMSR
+    bt      $APIC_BSC, %eax             # Is this the BSC?
+    jnc      node_core_f10_AP            # Br if no
+
+        # This is the BSP.
+    # Enable routing tables on BSP (just in case the HT init code has not yet enabled them)
+    mov     $0x8000C06C, %eax             # PCI address for D18F0x6C Link Initialization Control Register
+    mov     $0x0CF8, %dx
+    out     %eax, %dx
+    add     $4, %dx
+    in      %dx, %eax
+    btr     $0, %eax                      # Set LinkInitializationControl[RouteTblDis] = 0
+    out     %eax, %dx
+    jmp     1f          #
+
+node_core_f10_AP:
+    #
+    # This is an AP. Routing tables have been enabled by the HT Init process.
+    # Also, the MailBox register was set by the BSP during early init
+    #   The Mailbox register content is formatted as follows:
+    #         UINT32 Node:4#          // The node id of Core's node.
+    #         UINT32 Socket:4#        // The socket of this Core's node.
+    #         UINT32 Module:2#        // The internal module number for Core's node.
+    #         UINT32 ModuleType:2#    // Single Module = 0, Multi-module = 1.
+    #         UINT32 :20#             // Reserved
+    #
+    mov     $0x0C0000408, %ecx             # Read the family 10h mailbox
+    _RDMSR                              #        MC4_MISC1[63:32]
+    mov     %dx, %si                      # SI = raw mailbox contents (will extract node# from this)
+    shr     $24, %ebx                     # BL = CPUID Fn0000_0001_EBX[LocalApicId]
+    mov     %bx, %di                      # DI = Initial APIC ID (will extract core# from this)
+
+    AMD_CPUID   $AMD_CPUID_APIC          #
+    shr     $4, %ch                       # CH = ApicIdSize, #bits in APIC ID that show core#
+    inc     %cl                          # CL = Number of enabled cores in the socket
+    mov     %cx, %bx
+
+    mov     $NB_CFG, %ecx                 # MSR:C001_001F
+    _RDMSR                              # EDX has InitApicIdCpuIdLo bit
+
+    mov     %bh, %cl                      # CL = APIC ID size
+    mov     $1, %al                       # Convert APIC ID size to an AND mask
+    shl     %cl, %al                      # AL = 2^APIC ID size
+    dec     %al                          # AL = mask for relative core number
+    xor     %ah, %ah                      # AX = mask for relative core number
+    bt      $(INIT_APIC_ID_CPU_ID_LO-32), %edx # InitApicIdCpuIdLo == 1?
+    #.if (!carry?)                       # Br if yes
+    jc      0f
+        mov     $8, %ch                   # Calculate core number shift count
+        sub     %cl, %ch                  # CH = core shift count
+        mov     %ch, %cl
+        shr     %cl, %di                  # Right justify core number
+    #.endif
+   0:
+    and     %ax, %di                      # DI = socket-relative core number
+
+    mov     %si, %cx                      # CX = raw mailbox value
+    shr     $10, %cx                      # CL[1:0] = ModuleType or #nodes per socket (0-SCM, 1-MCM)
+    and     $3, %cl                       # Isolate ModuleType
+    xor     %bh, %bh                      # BX = Number of enabled cores in the socket
+    shr     %cl, %bx                      # BX = Number of enabled cores per node
+    xor     %dx, %dx                      # Clear upper word for div
+    mov     %di, %ax                      # AX = socket-relative core number
+    div     %bx                          # DX = node-relative core number
+    movzx   %si, %eax                     # prepare return value, [23:16]=shared Core# (=0, not shared)
+    and     $0x000F, %ax                   # AX = node number
+    shl     $8, %ax                       # [15:8]=node#
+    mov     %dl, %al                      # [7:0]=core# (relative to node)
+    mov     %eax, %esi                    # ESI = return value
+1:
+ bts     $FLAG_IS_PRIMARY, %esi        # all Family 10h cores are primary
+node_core_f10_exit:
+.endm
+
+
+/*****************************************************************************
+**                      Family 12h MACROS
+*****************************************************************************/
+/*****************************************************************************
+*
+* AMD_ENABLE_STACK_FAMILY_HOOK_F12 Macro - Stackless
+*
+*   Set any family specific controls needed to enable the use of
+*   cache as general storage before main memory is available.
+*
+* Inputs:
+*       ESI - node#, core#, flags from GET_NODE_ID_CORE_ID
+* Outputs:
+*       none
+*
+* Family 12h requirements (BKDG section 2.3.3):
+*   The following requirements must be satisfied prior to using the cache as general storage:
+*   * Paging must be disabled.
+*   * MSRC001_0015[INVD_WBINVD]=0
+*   * MSRC001_1020[DIS_SS]=1
+*   * MSRC001_1021[DIS_SPEC_TLB_RLD]=1
+*   * MSRC001_1022[DIS_SPEC_TLB_RLD]=1
+*   * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=1
+*   * MSRC001_1022[DIS_HW_PF]=1
+*   * MSRC001_1029[ClflushSerialize]=1
+*   * No INVD or WBINVD, no exceptions, page faults or interrupts
+*****************************************************************************/
+.macro  AMD_ENABLE_STACK_FAMILY_HOOK_F12
+    LOCAL   fam12_enable_stack_hook_exit
+
+    AMD_CPUID   $CPUID_MODEL
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $0x03, %al                     # Is this family 12h?
+    jnz     fam12_enable_stack_hook_exit # Br if no
+
+    mov     $DC_CFG, %ecx                 # MSR:C001_1022
+    _RDMSR
+    bts     $DC_DIS_SPEC_TLB_RLD, %eax    # Disable speculative DC-TLB reloads
+    bts     $DIS_CLR_WBTOL2_SMC_HIT, %eax # Disable self modifying code check buffer
+    bts     $DIS_HW_PF, %eax              # Disable hardware prefetches
+    _WRMSR
+
+    dec     %cx   #IC_CFG                # MSR:C001_1021
+    _RDMSR
+    bts     $IC_DIS_SPEC_TLB_RLD, %eax    # Disable speculative IC-TLB reloads
+    _WRMSR
+
+    dec     %cx   #LS_CFG                # MSR:C001_1020
+    _RDMSR
+    bts     $DIS_SS, %eax                 # Disabled Streaming store functionality
+    _WRMSR
+
+    mov     $HWCR, %ecx                   # MSR C001_0015
+    _RDMSR
+    bt      $FLAG_STACK_REENTRY , %esi                 # Check if stack has already been set
+    jc      fam12_skipClearingBit4
+    btr     $INVD_WBINVD, %eax            # disable INVD -> WBINVD conversion
+    _WRMSR
+
+fam12_skipClearingBit4:
+    mov     $DE_CFG, %ecx                 # MSR:C001_1029
+    _RDMSR
+    bts     $CL_FLUSH_SERIALIZE, %eax     # Serialize all CL Flush actions
+    _WRMSR
+
+fam12_enable_stack_hook_exit:
+.endm
+
+/*****************************************************************************
+*
+* AMD_DISABLE_STACK_FAMILY_HOOK_F12 Macro - Stackless
+*
+*   Return any family specific controls to their 'standard'
+*   settings for using cache with main memory.
+*
+* Inputs:
+*       ESI - [31:24] flags; [15,8]= Node#; [7,0]= core#
+* Outputs:
+*       none
+*
+* Family 12h requirements:
+*   * INVD or WBINVD
+*   * MSRC001_0015[INVD_WBINVD]=1
+*   * MSRC001_1020[DIS_SS]=0
+*   * MSRC001_1021[IC_DIS_SPEC_TLB_RLD]=0
+*   * MSRC001_1022[DC_DIS_SPEC_TLB_RLD]=0
+*   * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=0
+*   * MSRC001_1022[DIS_HW_PF]=0
+*   * MSRC001_1029[ClflushSerialize]=0
+*****************************************************************************/
+.macro  AMD_DISABLE_STACK_FAMILY_HOOK_F12
+    LOCAL   fam12_disable_stack_hook_exit
+
+    AMD_CPUID   $CPUID_MODEL
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $0x03, %al                     # Is this family 12h?
+    jnz     fam12_disable_stack_hook_exit # Br if no
+
+    mov     $DC_CFG, %ecx                 # MSR:C001_1022
+    _RDMSR
+    btr     $DC_DIS_SPEC_TLB_RLD, %eax    # Turn on speculative DC-TLB reloads
+    btr     $DIS_CLR_WBTOL2_SMC_HIT, %eax # Enable self modifying code check buffer
+    btr     $DIS_HW_PF, %eax              # Enable Hardware prefetches
+    _WRMSR
+
+    dec     %cx   #IC_CFG                # MSR:C001_1021
+    _RDMSR
+    btr     $IC_DIS_SPEC_TLB_RLD, %eax    # Turn on speculative IC-TLB reloads
+    _WRMSR
+
+    dec     %cx   #LS_CFG                # MSR:C001_1020
+    _RDMSR
+    btr     $DIS_SS, %eax                 # Turn on Streaming store functionality
+    _WRMSR
+
+    mov     $DE_CFG, %ecx                 # MSR:C001_1029
+    _RDMSR
+    btr     $CL_FLUSH_SERIALIZE, %eax
+    _WRMSR
+
+    #--------------------------------------------------------------------------
+    # Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    #--------------------------------------------------------------------------
+
+    mov     $HWCR, %ecx                    # MSR:0000_0015h
+    _RDMSR
+    mov     %ax, %bx                      # Save INVD -> WBINVD bit
+    btr     $INVD_WBINVD, %eax            # Disable INVD -> WBINVD conversion
+    _WRMSR
+    invd                                # Clear the cache tag RAMs
+    mov     %bx, %ax                      # Restore INVD -> WBINVD bit
+    _WRMSR
+
+    #--------------------------------------------------------------------------
+    # End critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    #--------------------------------------------------------------------------
+
+fam12_disable_stack_hook_exit:
+.endm
+
+/*****************************************************************************
+*
+* GET_NODE_ID_CORE_ID_F12 Macro - Stackless
+*
+*   Read family specific values to determine the node and core
+*   numbers for the core executing this code.
+*
+* Inputs:
+*     none
+* Outputs:
+*     SI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above)
+*****************************************************************************/
+.macro  GET_NODE_ID_CORE_ID_F12
+
+    LOCAL   node_core_f12_exit
+
+    cmp     $-1, %si                      # Has node/core already been discovered?
+    jnz     node_core_f12_exit          # Br if yes
+
+    AMD_CPUID   $CPUID_MODEL
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $0x03, %al                     # Is this family 12h?
+    jnz     node_core_f12_exit          # Br if no
+
+    shr     $24, %ebx                     # CPUID_0000_0001_EBX[31:24]: initial local APIC physical ID
+    bts     $FLAG_IS_PRIMARY, %ebx        # all family 12h cores are primary
+    mov     %ebx, %esi                    # ESI = Node#=0, core number
+node_core_f12_exit:
+.endm
+
+/*****************************************************************************
+**                      Family 14h MACROS
+*****************************************************************************/
+/*****************************************************************************
+*
+* AMD_ENABLE_STACK_FAMILY_HOOK_F14 Macro - Stackless
+*
+*   Set any family specific controls needed to enable the use of
+*   cache as general storage before main memory is available.
+*
+* Inputs:
+*       ESI - node#, core#, flags from GET_NODE_ID_CORE_ID
+* Outputs:
+*       none
+*
+* Family 14h requirements (BKDG section 2.3.3):
+*   * Paging must be disabled.
+*   * MSRC001_0015[INVD_WBINVD]=0.
+*   * MSRC001_1020[DisStreamSt]=1.
+*   * MSRC001_1021[DIS_SPEC_TLB_RLD]=1. Disable speculative ITLB reloads.
+*   * MSRC001_1022[DIS_HW_PF]=1.
+*   * No INVD or WBINVD, no exceptions, page faults or interrupts
+*****************************************************************************/
+.macro  AMD_ENABLE_STACK_FAMILY_HOOK_F14
+    LOCAL   fam14_enable_stack_hook_exit
+
+    AMD_CPUID   $CPUID_MODEL
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $0x05, %al                     # Is this family 14h?
+    jnz     fam14_enable_stack_hook_exit # Br if no
+
+    mov     $DC_CFG, %ecx                 # MSR:C001_1022
+    _RDMSR
+    bts     $DIS_HW_PF, %eax              # Disable hardware prefetches
+    _WRMSR
+
+    dec     %cx  #IC_CFG                 # MSR:C001_1021
+    _RDMSR
+    bts     $IC_DIS_SPEC_TLB_RLD, %eax    # Disable speculative TLB reloads
+    _WRMSR
+
+    dec     %cx  #LS_CFG                 # MSR:C001_1020
+    _RDMSR
+    bts     $DIS_STREAM_ST, %eax          # Disabled Streaming store functionality
+    _WRMSR
+
+    mov     $HWCR, %ecx                   # MSR C001_0015
+    _RDMSR
+    bt      $FLAG_STACK_REENTRY, %esi     # Check if stack has already been set
+    jc      fam14_skipClearingBit4
+    btr     $INVD_WBINVD, %eax            # Disable INVD -> WBINVD conversion
+    _WRMSR
+fam14_skipClearingBit4:                 # Keeping this label
+
+fam14_enable_stack_hook_exit:
+.endm
+
+/*****************************************************************************
+*
+* AMD_DISABLE_STACK_FAMILY_HOOK_F14 Macro - Stackless
+*
+*   Return any family specific controls to their 'standard'
+*   settings for using cache with main memory.
+*
+* Inputs:
+*       ESI - [31:24] flags; [15,8]= Node#; [7,0]= core#
+* Outputs:
+*       none
+*
+* Family 14h requirements:
+*   * INVD or WBINVD
+*   * MSRC001_0015[INVD_WBINVD]=1.
+*   * MSRC001_1020[DisStreamSt]=0.
+*   * MSRC001_1021[DIS_SPEC_TLB_RLD]=0.
+*   * MSRC001_1022[DIS_HW_PF]=0.
+*****************************************************************************/
+.macro  AMD_DISABLE_STACK_FAMILY_HOOK_F14
+    LOCAL   fam14_disable_stack_hook_exit
+
+    AMD_CPUID   $CPUID_MODEL
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $0x05, %al                     # Is this family 14h?
+    jnz     fam14_disable_stack_hook_exit # Br if no
+
+    mov     $LS_CFG, %ecx                 # MSR:C001_1020
+    _RDMSR
+    btr     $DIS_STREAM_ST, %eax          # Turn on Streaming store functionality
+    _WRMSR
+
+    inc     %cx  #IC_CFG                 # MSR:C001_1021
+    _RDMSR
+    btr     $IC_DIS_SPEC_TLB_RLD, %eax    # Turn on speculative DC-TLB reloads
+    _WRMSR
+
+    inc     %cx  #DC_CFG                 # MSR:C001_1022
+    _RDMSR
+    btr     $DIS_HW_PF, %eax              # Turn on hardware prefetches
+    _WRMSR
+
+    #--------------------------------------------------------------------------
+    # Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    #--------------------------------------------------------------------------
+
+    mov     $HWCR, %ecx                    # MSR:C001_0015h
+    _RDMSR
+    btr     $INVD_WBINVD, %eax            # Disable INVD -> WBINVD conversion
+    _WRMSR
+    invd                                # Clear the cache tag RAMs
+    bts     $INVD_WBINVD, %eax            # Turn on Conversion of INVD to WBINVD
+    _WRMSR
+
+    #--------------------------------------------------------------------------
+    # End critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    #--------------------------------------------------------------------------
+
+fam14_disable_stack_hook_exit:
+.endm
+
+/*****************************************************************************
+*
+* GET_NODE_ID_CORE_ID_F14 Macro - Stackless
+*
+*   Read family specific values to determine the node and core
+*   numbers for the core executing this code.
+*
+* Inputs:
+*     none
+* Outputs:
+*     SI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above)
+*****************************************************************************/
+.macro  GET_NODE_ID_CORE_ID_F14
+
+    LOCAL   node_core_f14_exit
+
+    cmp     $0x-1, %si                      # Has node/core already been discovered?
+    jnz     node_core_f14_exit          # Br if yes
+
+    AMD_CPUID   $CPUID_MODEL
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $0x05, %al                     # Is this family 14h?
+    jnz     node_core_f14_exit          # Br if no
+
+    xor     %esi, %esi                    # Node must be 0
+    bts     $FLAG_IS_PRIMARY, %esi        # all family 14h cores are primary
+    mov     $APIC_BASE_ADDRESS, %ecx      # MSR:0000_001B
+    _RDMSR
+    bt      $APIC_BSC, %eax               # Is this the BSC?
+    jc      node_core_f14_exit          # Br if yes
+    inc     %si                          # Set core to 1
+node_core_f14_exit:
+.endm
+
+
+
+/*****************************************************************************
+**                      Family 15h MACROS
+*****************************************************************************/
+/*****************************************************************************
+*
+* AMD_ENABLE_STACK_FAMILY_HOOK_F15 Macro - Stackless
+*
+*   Set any family specific controls needed to enable the use of
+*   cache as general storage before main memory is available.
+*
+* Inputs:
+*       ESI - node#, core#, flags from GET_NODE_ID_CORE_ID
+* Outputs:
+*       none
+*
+* Family 15h requirements (BKDG #42301 section 2.3.3):
+*   * Paging must be disabled.
+*   * MSRC001_0015[INVD_WBINVD]=0
+*   * MSRC001_1020[DisSS]=1
+*   * MSRC001_1021[DIS_SPEC_TLB_RLD]=1
+*   * MSRC001_1022[DIS_SPEC_TLB_RLD]=1
+*   * MSRC001_1022[DisHwPf]=1
+*   * No INVD or WBINVD, no exceptions, page faults or interrupts
+*****************************************************************************/
+.macro  AMD_ENABLE_STACK_FAMILY_HOOK_F15
+    LOCAL   fam15_enable_stack_hook_exit
+
+    AMD_CPUID   $CPUID_MODEL
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $0x06, %al                     # Is this family 15h?
+    jnz     fam15_enable_stack_hook_exit # Br if no
+
+    bt      $FLAG_STACK_REENTRY , %esi                 # Check if stack has already been set
+    jc      fam15_skipClearingBit4
+    mov     $HWCR, %ecx                   # MSR C001_0015
+    _RDMSR
+    btr     $INVD_WBINVD, %eax            # disable INVD -> WBINVD conversion
+    _WRMSR
+
+fam15_skipClearingBit4:
+    mov     $LS_CFG, %ecx                 # MSR:C001_1020
+    _RDMSR
+    bts     $DIS_SS, %eax                 # Turn on Streaming store functionality disabled bit
+    _WRMSR
+
+    inc     %ecx  #IC_CFG                # MSR:C001_1021
+    _RDMSR
+    bts     $IC_DIS_SPEC_TLB_RLD, %eax    # Turn on Disable speculative IC-TLB reloads bit
+    _WRMSR
+
+    inc     %ecx  #DC_CFG                # MSR:C001_1022
+    _RDMSR
+    bts     $DC_DIS_SPEC_TLB_RLD, %eax    # Turn on Disable speculative DC-TLB reloads bit
+    bts     $DIS_HW_PF, %eax              # Turn on Disable hardware prefetches bit
+    _WRMSR
+
+    mov     $CU_CFG3, %ecx                # MSR:C001_102B
+    _RDMSR
+    btr     $(COMBINE_CR0_CD - 32), %edx         # Clear CombineCr0Cd bit
+    _WRMSR
+
+fam15_enable_stack_hook_exit:
+.endm
+
+
+/*****************************************************************************
+*
+* AMD_DISABLE_STACK_FAMILY_HOOK_F15 Macro - Stackless
+*
+*   Return any family specific controls to their 'standard'
+*   settings for using cache with main memory.
+*
+* Inputs:
+*       ESI - [31:24] flags; [15,8]= Node#; [7,0]= core#
+* Outputs:
+*       none
+*
+* Family 15h requirements:
+*   * INVD or WBINVD
+*   * MSRC001_0015[INVD_WBINVD]=1
+*   * MSRC001_1020[DisSS]=0
+*   * MSRC001_1021[DIS_SPEC_TLB_RLD]=0
+*   * MSRC001_1022[DIS_SPEC_TLB_RLD]=0
+*   * MSRC001_1022[DIS_HW_PF]=0
+*****************************************************************************/
+.macro  AMD_DISABLE_STACK_FAMILY_HOOK_F15
+    LOCAL   fam15_disable_stack_hook_exit
+
+    AMD_CPUID   $CPUID_MODEL
+    mov     %eax, %ebx                    # Save revision info to EBX
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $0x06, %al                     # Is this family 15h?
+    jnz     fam15_disable_stack_hook_exit # Br if no
+
+    mov     $LS_CFG, %ecx                 # MSR:C001_1020
+    #.if (ebx != 00600F00h)              ; Is this rev A0?
+    cmp	$0x00600F00, %ebx
+    jz	0f
+    _RDMSR
+    btr     $DIS_SS, %eax                 # Turn on Streaming store functionality
+    _WRMSR
+    #.endif
+    0:                              # End workaround for errata 495 and 496
+
+    inc     %ecx  #IC_CFG                # MSR:C001_1021
+    _RDMSR
+    btr     $IC_DIS_SPEC_TLB_RLD, %eax    # Turn on speculative TLB reloads
+    _WRMSR
+
+    inc     %ecx  #DC_CFG                # MSR:C001_1022
+    _RDMSR
+    btr     $DC_DIS_SPEC_TLB_RLD, %eax    # Turn on speculative TLB reloads
+    #.if (ebx != 00600F00h)              # Is this rev A0?
+    cmp	$0x00600F00, %ebx
+    jz	0f
+    btr     $DIS_HW_PF, %eax              # Turn on hardware prefetches
+    #.endif                              # End workaround for erratum 498
+    0:
+    _WRMSR
+    #--------------------------------------------------------------------------
+    # Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    #--------------------------------------------------------------------------
+
+    bt      $FLAG_IS_PRIMARY, %esi
+    #.if (carry?)                        # Only clear cache from primary core
+    jnc 0f
+    mov     $HWCR, %ecx                    # MSR:C001_0015h
+    _RDMSR
+    btr     $INVD_WBINVD, %eax            # Disable INVD -> WBINVD conversion
+    _WRMSR
+    wbinvd                                # Clear the cache tag RAMs
+    bts     $INVD_WBINVD, %eax            # Turn on Conversion of INVD to WBINVD
+    _WRMSR
+    #.endif                              # end
+    0:
+
+    #--------------------------------------------------------------------------
+    # End critical sequence in which EAX, BX, ECX, and EDX must be preserved.
+    #--------------------------------------------------------------------------
+
+    mov     $CU_CFG3, %ecx                # MSR:C001_102B
+    _RDMSR
+    bts     $(COMBINE_CR0_CD - 32), %eax         # Set CombineCr0Cd bit
+    _WRMSR
+
+fam15_disable_stack_hook_exit:
+.endm
+
+
+/*****************************************************************************
+*
+* GET_NODE_ID_CORE_ID_F15 Macro - Stackless
+*
+*   Read family specific values to determine the node and core
+*   numbers for the core executing this code.
+*
+* Inputs:
+*     none
+* Outputs:
+*     SI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above)
+*****************************************************************************/
+.macro  GET_NODE_ID_CORE_ID_F15
+
+    LOCAL   node_core_f15_exit
+    LOCAL   node_core_f15_AP
+    LOCAL   node_core_f15_shared
+
+    cmp     $-1, %si                      # Has node/core already been discovered?
+    jnz     node_core_f15_exit          # Br if yes
+
+    AMD_CPUID   $CPUID_MODEL
+    shr     $20, %eax                     # AL = cpu extended family
+    cmp     $06, %al                     # Is this family 15h?
+    jnz     node_core_f15_exit          # Br if no
+
+    xor     %esi, %esi                    # Assume BSC, clear local flags
+    mov     $APIC_BASE_ADDRESS, %ecx      # MSR:0000_001B
+    _RDMSR
+    bt      $APIC_BSC, %eax               # Is this the BSC?
+    jnc      node_core_f15_AP            # Br if no
+
+    # This is the BSP.
+    # Enable routing tables on BSP (just in case the HT init code has not yet enabled them)
+    mov     $0x8000C06C, %eax              # PCI address for D18F0x6C Link Initialization Control Register
+    mov     $0x0CF8, %dx
+    out     %eax, %dx
+    add     $4, %dx
+    in      %dx, %eax
+    btr     $0, %eax                      # Set LinkInitializationControl[RouteTblDis] = 0
+    out     %eax, %dx
+    jmp     node_core_f15_shared        #
+
+node_core_f15_AP:
+    #
+    # This is an AP. Routing tables have been enabled by the HT Init process.
+    # Also, the MailBox register was set by the BSP during early init
+    #   The Mailbox register content is formatted as follows:
+    #         UINT32 Node:4;          // The node id of Core's node.
+    #         UINT32 Socket:4;        // The socket of this Core's node.
+    #         UINT32 Module:2;        // The internal module number for Core's node.
+    #         UINT32 ModuleType:2;    // Single Module = 0, Multi-module = 1.
+    #         UINT32 :20;             // Reserved
+    #
+    mov     $0x0C0000408, %ecx             # Read the family 15h mailbox
+    _RDMSR                              #      MC4_MISC1[63:32]
+    mov     %dx, %si                      # SI = raw mailbox contents (will extract node# from this)
+    shr     $24, %ebx                     # BL = CPUID Fn0000_0001_EBX[LocalApicId]
+    mov     %bx, %di                      # DI = Initial APIC ID (will extract core# from this)
+
+    AMD_CPUID   $AMD_CPUID_APIC          #
+    shr     $4, %ch                       # CH = ApicIdSize, #bits in APIC ID that show core#
+    inc     %cl                          # CL = Number of enabled cores in the socket
+    mov     %cx, %bx
+
+    mov     $NB_CFG, %ecx
+    _RDMSR                              # EDX has InitApicIdCpuIdLo bit
+
+    mov     %bh, %cl                      # CL = APIC ID size
+    mov     $1, %al                       # Convert APIC ID size to an AND mask
+    shl     %cl, %al                      # AL = 2^APIC ID size
+    dec     %al                          # AL = mask for relative core number
+    xor     %ah, %ah                      # AX = mask for relative core number
+    bt      $(INIT_APIC_ID_CPU_ID_LO-32), %edx # InitApicIdCpuIdLo == 1?
+    #.if (!carry?)                       # Br if yes
+    jc      0f
+        mov     $8, %ch                   # Calculate core number shift count
+        sub     %cl, %ch                  # CH = core shift count
+        mov     %ch, %cl
+        shr     %cl, %di                  # Right justify core number
+    #.endif
+    0:
+    and     %ax, %di                      # DI = socket-relative core number
+
+    mov     %si, %cx                      # CX = raw mailbox value
+    shr     $10, %cx                      # CL[1:0] = ModuleType or #nodes per socket (0-SCM, 1-MCM)
+    and     $3, %cl                       # Isolate ModuleType
+    xor     %bh, %bh                      # BX = Number of enabled cores in the socket
+    shr     %cl, %bx                      # BX = Number of enabled cores per node
+    xor     %dx, %dx                      # Clear upper word for div
+    mov     %di, %ax                      # AX = socket-relative core number
+    div     %bx                          # DX = node-relative core number
+    movzx   %si, %eax                     # Prepare return value
+    and     $0x000F, %ax                   # AX = node number
+    shl     $8,%ax                       # [15:8]=node#
+    mov     %dl, %al                      # [7:0]=core# (relative to node)
+    mov     %eax, %esi                    # ESI = node-relative core number
+
+      #
+      #   determine if this core shares MTRRs
+      #
+node_core_f15_shared:
+    mov     $0x8000C580, %eax              # Compute Unit Status
+    mov     %si, %bx
+    shl     $3, %bh                       # Move node# to PCI Dev# field
+    add     %bh, %ah                      # Adjust for node number
+    mov     $0x0CF8, %dx
+    out     %eax, %dx
+    add     $4, %dx
+    in      %dx, %eax                     # [3:0]=Enabled# [19:16]=DualCore
+
+                                        # BL is MyCore#
+    mov     $0x06, %cx                     # Use CH as 'first of pair' core#
+    #.while (cl > 0)
+    jmp  0f
+    8:
+        bt      $0, %eax                  # Is pair enabled?
+        #.if (carry?)                    #
+        jnc     1f
+            mov     $0x01, %bh             #   flag core as primary
+            bt      $16, %eax             # Is there a 2nd in the pair?
+            #.if (carry?)                #
+            jnc 4f
+                #.break .if (ch == bl)   # Does 1st match MyCore#?
+                cmp     %bl, %ch
+                je      9f
+                inc     %ch
+                xor     %bh, %bh          #     flag core as NOT primary
+                #.break .if (ch == bl)   # Does 2nd match MyCore#?
+                cmp     %bl, %ch
+                je      9f
+                jmp     2f
+            #.else                       # No 2nd core
+            4:
+                #.break .if (ch == bl)   # Does 1st match MyCore#?
+                cmp     %bl, %ch
+                je      9f
+            #.endif
+            2:
+            inc     %ch
+        #.endif
+        1:
+        shr     $1, %eax
+        dec     %cl
+    #.endw
+    0:
+    #.if (cl == 0)
+    cmp $0x0, %cl
+    ja	8b
+    9:
+    or	%cl, %cl
+    jne 1f
+        #Error - core# didn't match Compute Unit Status content
+        bts     $FLAG_UNKNOWN_FAMILY, %esi
+        bts     $FLAG_IS_PRIMARY, %esi    #   Set Is_Primary for unknowns
+    #.endif
+    1:
+    #.if (bh != 0)                       # Check state of primary for the matched core
+    or %bh, %bh
+    je 2f
+        bts     $FLAG_IS_PRIMARY, %esi    #   Set shared flag into return value
+    #.endif
+    2:
+
+node_core_f15_exit:
+
+.endm
+
+/*****************************************************************************
+* AMD_ENABLE_STACK:  Setup a stack
+*
+*   In:
+*       EBX  = Return address (preserved)
+*
+*   Out:
+*       SS:ESP - Our new private stack location
+*
+*       EAX = AGESA_STATUS
+*
+*       ECX = Stack size in bytes
+*
+*   Requirements:
+*       * This routine presently is limited to a max of 64 processor cores
+*   Preserved:
+*       ebx ebp
+*   Destroyed:
+*       eax, ecx, edx, edi, esi, ds, es, ss, esp
+*       mmx0, mmx1
+*
+*   Description:
+* Fixed MTRR address allocation to cores:
+* The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K.
+* There is a max of 1 BSP, 7 core0s and 56 other cores.
+* Although each core has it's own cache storage, they share the address space. Each core must
+* be assigned a private and unique address space for its stack. To support legacy systems,
+* the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved
+* for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.)
+*
+* 80000h                                        40000h                                      00000h
+*     +----------+----------+----------+----------+----------+----------+----------+----------+
+* 64K |          |          |          |          |          |          |          |          |  64K  ea
+*  ea +----------+----------+----------+----------+----------+----------+----------+----------+
+*     |                             MTRR 0000_0250 MTRRfix64K_00000                           |
+*     +----------+----------+----------+----------+----------+----------+----------+----------+
+*     |  7 ,  6  |  5 ,  4  |  3 ,  2  |  1 ,  0  |     0    |          |          |          | <-node
+*     |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 |     0    |          |          |          | <-core
+*     +----------+----------+----------+----------+----------+----------+----------+----------+
+*
+* C0000h                       B0000h                      A0000h                      90000h                      80000h
+*     +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+*16K  |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+* ea  +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+*     |              MTRR 0259 MTRRfix16K_A0000               |             MTRR 0258 MTRRfix16K_80000                |
+*     +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+*     | > Dis|play B|uffer |   <  |      |      |      |      |   7  |  6   |  5   |  4   |  3   |  2   |  1   |      | <-node
+*     | >   T| e  m |p o r |a r y |  B u |f f e |r   A |r e a<|   0  |  0   |  0   |  0   |  0   |  0   |  0   |      | <-core
+*     +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+*
+* E0000h                                            D0000h                                         C0000h
+*     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+* 4K  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  4K  ea
+*  ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+*     |  026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000  | 0269 MTRRfix4K_C8000  | 0268 MTRRfix4K_C0000  |
+*     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+*     |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  | >| V| I| D| E| O|  |B |I |O |S |  |A |r |e |a<|
+*     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+*
+* 100000h                                           F0000h                                          E0000h
+*     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+*     |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  4K  ea
+*     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+*     |  026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000  | 026D MTRRfix4K_E8000  | 026C MTRRfix4K_E0000  |
+*     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+*     | >|MA|IN| B|IO|S |RA|NG|E |  |  |  |  |  |  |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE|  |  |  |  |  |< |
+*     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+*****************************************************************************/
+.macro  AMD_ENABLE_STACK
+
+# These are local labels. Declared so linker doesn't cause 'redefined label' errors
+    LOCAL   SetupStack
+    LOCAL   Real16bMode
+    LOCAL   Protected32Mode
+    LOCAL   ClearTheStack
+
+#   Note that SS:ESP will be default stack.  Note that this stack
+#   routine will not be used after memory has been initialized.  Because
+#   of its limited lifetime, it will not conflict with typical PCI devices.
+    movd    %ebx, %mm0                    # Put return address in a safe place
+    movd    %ebp, %mm1                    # Save some other user registers
+
+    # get node id and core id of current executing core
+    GET_NODE_ID_CORE_ID                 # Sets ESI[23:16]=Shared core## SI[15,8]= Node## SI[7,0]= core# (relative to node)
+    # Note: ESI[31:24] are used for flags:  Unrecognized Family,  Is_Primary core,  Stack already established
+
+    # determine if stack is already enabled. We are using the DefType MSR for this determination.
+    # It is =0 after reset; CAR setup sets it to enable the MTRRs
+    mov     %cr0, %eax
+    test    $CR0_MASK, %eax              # Is cache disabled? (CD & NW bits)
+    jnz     SetupStack                  # Jump if yes
+    mov     $AMD_MTRR_DEFTYPE, %ecx       # MSR:0000_02FF
+    _RDMSR
+    test    $MSR_MASK, %eax                     # Are the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN)
+    jz      SetupStack                  # Jump if no
+    or      $FLAG_STACK_REENTRY, %esi             # Bit25, indicate stack has already been initialized
+
+SetupStack:
+    # Set node to map the first 16MB to node 0# 0000_0000 to 00FF_FFFF as DRAM
+    mov     %esi, %ebx                    # Get my Node/Core info
+    xor     %bl, %bl
+    shl     $3, %bh                       # Isolate my node#, match alignment for PCI Dev#
+    mov     $0x8000C144, %eax              # D18F1x44:DRAM Base/Limit# N is Base, N+4 is Limit
+    add     %bh, %ah
+    mov     %eax, %ebx                    # Save PCI address for Base/Limit pair
+
+    mov     $0x0CF8, %dx
+    out     %eax, %dx
+    add     $4, %dx
+    xor     %eax, %eax                    # Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB)
+    out     %eax, %dx                     # DRAM Limit = node0, no interleave
+
+    mov     %ebx, %eax
+    sub     $4, %eax                      # Now point to the Base register
+    mov     $0x0CF8, %dx
+    out     %eax, %dx
+    add     $4, %dx
+    mov     $0x00000003, %eax              # Set the read and write enable bits
+    out     %eax, %dx                     # DRAM Base = 0x0000, R/W
+
+    AMD_ENABLE_STACK_FAMILY_HOOK
+
+    # Init CPU MSRs for our init routines
+    mov     $MTRR_SYS_CFG, %ecx           # SYS_CFG
+    _RDMSR
+    bts     $MTRR_FIX_DRAM_MOD_EN, %eax   # Turn on modification enable bit
+    _WRMSR
+
+    mov     %esi, %eax
+    bt      $FLAG_STACK_REENTRY, %eax     # Is this a 2nd entry?
+    #.if (!carry?)                       #   On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP
+    jc 0f
+        bt      $FLAG_IS_PRIMARY, %eax    #   Is this core the primary in a compute unit?
+        #.if (carry?)                    #     Families using shared groups do not need to clear the MTRRs since that is done at power-on reset
+            #  Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores
+            # Clear all variable and Fixed MTRRs for non-shared cores
+        jnc 0f
+        mov     $AMD_MTRR_VARIABLE_BASE0, %ecx
+        xor     %eax, %eax
+        xor     %edx, %edx
+        #.while (cl != 10h)                  # Variable MTRRphysBase[n] and MTRRphysMask[n]
+        jmp	1f
+        2:
+            _WRMSR
+            inc     %cl
+        #.endw
+        1:
+        cmp	$0x10, %cl
+        jne	2b
+        mov     $AMD_MTRR_FIX64k_00000, %cx   # MSR:0000_0250
+        _WRMSR
+        mov     $AMD_MTRR_FIX16k_80000, %cx   # MSR:0000_0258
+        _WRMSR
+        mov     $AMD_MTRR_FIX16k_A0000, %cx   # MSR:0000_0259
+        _WRMSR
+        mov     $AMD_MTRR_FIX4k_C0000, %cx    # Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000
+        #.while (cl != 70h)
+        jmp 3f
+        4:
+            _WRMSR
+            inc     %cl
+        #.endw
+        3:
+        cmp $0x70, %cl
+        jne  4b
+        # Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init.
+        #  - not strictly needed since the FixedMTRRs take presedence.
+        mov     $(16 * 1024 * 1024), %eax
+        mov     $TOP_MEM, %ecx            # MSR:C001_001A
+        _WRMSR
+        #.endif                          #   End Is_Primary
+    #.endif                              # End Stack_ReEntry
+    0:
+    # Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores
+    xor     %eax, %eax
+    xor     %edx, %edx
+    mov     $IORR_BASE, %ecx              # MSR:C001_0016 - 0019
+    #.while (cl != 1Ah)
+    jmp  1f
+    2:
+        _WRMSR
+        inc     %cl
+    #.endw
+    1:
+    cmp $0x1A, %cl
+    jne  2b
+    mov     $TOP_MEM2, %ecx               # MSR:C001_001D
+    _WRMSR
+
+    # setup MTTRs for stacks
+    #   A speculative read can be generated by a speculative fetch mis-aligned in a code zone
+    #    or due to a data zone being interpreted as code. When a speculative read occurs outside a
+    #    controlled region (intentionally used by software), it could cause an unwanted cache eviction.
+    #   To prevent speculative reads from causing an eviction, the unused cache ranges are set
+    #    to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs.
+    #    Note: some core stack regions will share an MTRR since the control granularity is much
+    #    larger than the allocated stack zone. The allocation algorithm must account for this 'extra'
+    #    space covered by the MTRR when parseling out cache space for the various uses. In some cases
+    #    this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c
+    #
+    # Outcome of this block is that:   (Note the MTRR map at the top of the file)
+    #   ebp - start address of stack block
+    #   ebx - [31:16] - MTRR MSR address
+    #       - [15:8]  - slot# in MTRR register
+    #       - [7:0]   - block size in #4K blocks
+    # review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node)
+    #
+
+    mov     %si, %ax                      # Load node, core
+    #.if (al == 0)                       # Is a core 0?
+    or %al, %al
+    jne 1f
+        #.if (ah == 0)                   # Is Node 0? (BSP)
+        or %ah, %ah
+        jne 2f
+            # Is BSP, assign a 64K stack
+            mov     $((AMD_MTRR_FIX64k_00000 << 16) + (3 << 8) + (BSP_STACK_SIZE  / 0x1000)), %ebx
+            mov     $BSP_STACK_BASE_ADDR, %ebp
+            jmp     0f
+        #.else   # node 1 to 7, core0
+        2:
+            # Is a Core0 of secondary node, assign 16K stacks
+            mov     $AMD_MTRR_FIX16k_80000, %bx
+            shl     $16, %ebx             #
+            mov     %ah, %bh              # Node# is used as slot#
+            mov     $(CORE0_STACK_SIZE / 0x1000), %bl
+            mov     %ah, %al              # Base = (Node# * Size)#
+            mul     %bl                  #
+            movzx   %ax, %eax             #
+            shl     $12, %eax             # Expand back to full byte count (* 4K)
+            add     $CORE0_STACK_BASE_ADDR, %eax
+            mov     %eax, %ebp
+        #.endif
+        jmp 0f
+    #.else    #core 1 thru core 7
+    1:
+        # Is core 1-7 of any node, assign 4K stacks
+        mov     $8, %al                   # CoreIndex = ( (Node# * 8) ...
+        mul     %ah                      #
+        mov     %si, %bx                  #
+        add     %bl, %al                  #         ...  + Core#)#
+
+        mov     $AMD_MTRR_FIX64k_00000, %bx
+        shl     $16, %ebx                 #
+        mov     %al, %bh                  # Slot# = (CoreIndex / 16) + 4#
+        shr     $4, %bh                   #
+        add     $4, %bh                   #
+        mov     $(CORE1_STACK_SIZE / 0x1000), %bl
+
+        mul     %bl                      # Base = ( (CoreIndex * Size) ...
+        movzx   %ax, %eax                 #
+        shl     $12, %eax                 # Expand back to full byte count (* 4K)
+        add     $CORE1_STACK_BASE_ADDR, %eax #     ...   + Base_Addr)#
+        mov     %eax, %ebp
+    #.endif
+    0:
+
+    # Now set the MTRR. Add this to already existing settings (don't clear any MTRR)
+    mov     $WB_DRAM_TYPE, %edi           # Load Cache type in 1st slot
+    mov     %bh, %cl                      # ShiftCount =  ((slot#   ...
+    and     $0x03, %cl                     #   ...  % 4)             ...
+    shl     $0x03, %cl                       #   ...  * 8)#
+    shl     %cl, %edi                     # Cache type is now in correct position
+    ror     $16, %ebx                     # Get the MTRR address
+    movzx   %bx, %ecx                     #
+    rol     $16, %ebx                     # Put slot# & size back in BX
+    _RDMSR                              # Read-modify-write the MSR
+    #.if (bh < 4)                        # Is value in lower or upper half of MSR?
+    cmp $4, %bh
+    jae 1f
+        or      %edi, %eax                #
+        jmp     0f
+    #.else
+    1:                               #
+        or      %edi, %edx                #
+    #.endif                              #
+    0:
+    _WRMSR                              #
+
+    # Enable MTRR defaults as UC type
+    mov     $AMD_MTRR_DEFTYPE, %ecx       # MSR:0000_02FF
+    _RDMSR                              # Read-modify-write the MSR
+    bts     $MTRR_DEF_TYPE_EN, %eax       # MtrrDefTypeEn
+    bts     $MTRR_DEF_TYPE_FIX_EN, %eax   # MtrrDefTypeFixEn
+    _WRMSR
+
+    # Close the modification window on the Fixed MTRRs
+    mov     $MTRR_SYS_CFG, %ecx           # MSR:0C001_0010
+    _RDMSR
+    bts     $MTRR_FIX_DRAM_EN, %eax       # MtrrFixDramEn
+    bts     $MTRR_VAR_DRAM_EN, %eax       # variable MTRR enable bit
+    btr     $MTRR_FIX_DRAM_MOD_EN, %eax   # Turn off modification enable bit
+    _WRMSR
+
+    # Enable caching in CR0
+    mov     %cr0, %eax                    # Enable WT/WB cache
+    btr     $CR0_PG, %eax                     # Make sure paging is disabled
+    btr     $CR0_CD, %eax                     # Clear CR0 NW and CD
+    btr     $CR0_NW, %eax
+    mov     %eax, %cr0
+
+    # Use the Stack Base & size to calculate SS and ESP values
+    # review:
+    #       esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+    #       ebp - start address of stack block
+    #       ebx - [31:16] - MTRR MSR address
+    #           - [15:8]  - slot# in MTRR register
+    #           - [7:0]   - block size in #4K blocks
+    #
+    mov     %ebp, %esp                    # Initialize the stack pointer
+    mov     %esp, %edi                    # Copy the stack start to edi
+    movzx   %bl, %bx
+    movzx   %bx, %ebx                     # Clear upper ebx, don't need MSR addr anymore
+    shl     $12, %ebx                     # Make size full byte count (* 4K)
+    add     %ebx, %esp                    # Set the Stack Pointer as full linear address
+    sub     $4, %esp
+    #
+    # review:
+    #       esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+    #       edi - 32b start address of stack block
+    #       ebx - size of stack block
+    #       esp - 32b linear stack pointer
+    #
+
+    # Determine mode for SS base;
+    mov     %cr0, %ecx                    # Check for 32-bit protect mode
+    bt      $CR0_PE, %ecx                 #
+    #.if (!carry?)                       # PE=0 means real mode
+    jc      Protected32Mode
+    mov     %cs, %cx                      # PE=1
+    cmp     $0x0D000, %cx                  # Check for CS
+    jb      Protected32Mode             # If CS < D000, it is a selector instead of a segment
+            # alter SS:ESP for 16b Real Mode:
+Real16bMode:
+    mov     %edi, %eax
+    shr     $4, %eax                      # Create a Real Mode segment for ss, ds, es
+    mov     %ax, %ss
+    mov     %ax, %ds
+    mov     %ax, %es
+    shl     $4, %eax
+    sub     %eax, %edi                    # Adjust the clearing pointer for Seg:Offset mode
+    mov     %ebx, %esp                    # Make SP an offset from SS
+    sub     $4, %esp              #
+    #    .endif                          # endif
+    # #else
+    #   Default is to use Protected 32b Mode
+    #.endif
+    ;
+Protected32Mode:
+    #
+    # Clear The Stack
+    #   Now that we have set the location and the MTRRs, initialize the cache by
+    #   reading then writing to zero all of the stack area.
+    # review:
+    #       ss  - Stack base
+    #       esp - stack pointer
+    #       ebx - size of stack block
+    #       esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+    #       edi -  address of start of stack block
+    #
+
+ClearTheStack:                          # Stack base is in SS, stack pointer is in ESP
+    shr     $2, %ebx                      # ebx = stack block size in dwords
+    mov     %bx, %cx                      #
+    # Check our flags - Don't clear an existing stack
+    #.if ( !(esi & 0FF000000h))          # Check our flags
+    test    $(1 << FLAG_STACK_REENTRY), %esi
+    jne 1f
+        cld
+        mov     %edi, %esi
+        rep     lodsl (%esi)    # Pre-load the range
+        xor     %eax, %eax
+        mov     %bx, %cx
+        mov     %edi, %esi                # Preserve base for push on stack
+        rep     stosl (%edi)    # Clear the range
+        movl     $0x0ABCDDCBA, (%esp) # Put marker in top stack dword
+        shl     $2, %ebx                  # Put stack size and base
+        push    %ebx                     #  in top of stack
+        push    %esi
+
+        mov     %ebx, %ecx                # Return size of stack in bytes
+        xor     %eax, %eax                # eax = 0 : no error return code
+        jmp     0f
+    #.else
+    1:
+        movzx   %cx, %ecx
+        shl     $2, %ecx                  # Return size of stack in bytes
+        mov     %esi, %eax
+        shr     $24, %eax                 # Keep the flags as part of the error report
+        or      $0x40000000, %eax          # eax = AGESA_WARNING (Stack has already been set up)
+    #.endif
+    0:
+
+    movd        %mm0, %ebx                # Restore return address
+    movd        %mm1, %ebp
+.endm
+
+/*****************************************************************************
+* AMD_DISABLE_STACK:  Destroy the stack inside the cache. This routine
+*                     should only be executed on the BSP
+*
+*   In:
+*       none
+*
+*   Out:
+*       EAX = AGESA_SUCCESS
+*
+*   Preserved:
+*       ebx
+*   Destroyed:
+*       eax, ecx, edx, esp
+*****************************************************************************/
+.macro  AMD_DISABLE_STACK
+
+    mov     %ebx, %esp                    # Save return address
+
+    # get node/core/flags of current executing core
+    GET_NODE_ID_CORE_ID                 # Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node)
+
+    # Turn on modification enable bit
+    mov     $MTRR_SYS_CFG, %ecx           # MSR:C001_0010
+    _RDMSR
+    bts     $MTRR_FIX_DRAM_MOD_EN, %eax   # Enable modifications
+    _WRMSR
+
+    # Set lower 640K MTRRs for Write-Back memory caching
+    mov     $AMD_MTRR_FIX64k_00000, %ecx
+    mov     $0x1E1E1E1E, %eax
+    mov     %eax, %edx
+    _WRMSR                              # 0 - 512K = WB Mem
+    mov     $AMD_MTRR_FIX16k_80000, %ecx
+    _WRMSR                              # 512K - 640K = WB Mem
+
+    # Turn off modification enable bit
+    mov     $MTRR_SYS_CFG, %ecx           # MSR:C001_0010
+    _RDMSR
+    btr     $MTRR_FIX_DRAM_MOD_EN, %eax   # Disable modification
+    _WRMSR
+
+    AMD_DISABLE_STACK_FAMILY_HOOK       # Re-Enable 'normal' cache operations
+
+    mov     %esp, %ebx
+    xor     %eax, %eax
+
+.endm
+