diff options
-rw-r--r-- | src/mainboard/iei/Kconfig | 3 | ||||
-rw-r--r-- | src/mainboard/iei/pm-lx2-800-r10/Kconfig | 54 | ||||
-rw-r--r-- | src/mainboard/iei/pm-lx2-800-r10/devicetree.cb | 87 | ||||
-rw-r--r-- | src/mainboard/iei/pm-lx2-800-r10/irq_tables.c | 134 | ||||
-rw-r--r-- | src/mainboard/iei/pm-lx2-800-r10/mainboard.c | 52 | ||||
-rw-r--r-- | src/mainboard/iei/pm-lx2-800-r10/romstage.c | 90 |
6 files changed, 420 insertions, 0 deletions
diff --git a/src/mainboard/iei/Kconfig b/src/mainboard/iei/Kconfig index ea269221a7..0fbb6175d7 100644 --- a/src/mainboard/iei/Kconfig +++ b/src/mainboard/iei/Kconfig @@ -31,6 +31,8 @@ config BOARD_IEI_PCISA_LX_800_R10 bool "PCISA LX-800-R10" config BOARD_IEI_PM_LX_800_R11 bool "PM LX-800-R11" +config BOARD_IEI_PM_LX2_800_R10 + bool "PM LX2-800-R10" endchoice @@ -39,6 +41,7 @@ source "src/mainboard/iei/kino-780am2-fam10/Kconfig" source "src/mainboard/iei/nova4899r/Kconfig" source "src/mainboard/iei/pcisa-lx-800-r10/Kconfig" source "src/mainboard/iei/pm-lx-800-r11/Kconfig" +source "src/mainboard/iei/pm-lx2-800-r10/Kconfig" config MAINBOARD_VENDOR string diff --git a/src/mainboard/iei/pm-lx2-800-r10/Kconfig b/src/mainboard/iei/pm-lx2-800-r10/Kconfig new file mode 100644 index 0000000000..1485c94894 --- /dev/null +++ b/src/mainboard/iei/pm-lx2-800-r10/Kconfig @@ -0,0 +1,54 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +if BOARD_IEI_PM_LX2_800_R10 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select ARCH_X86 + select CPU_AMD_GEODE_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select SUPERIO_SMSC_SMSCSUPERIO + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select BOARD_ROMSIZE_KB_512 + select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_266 + +config MAINBOARD_DIR + string + default iei/pm-lx2-800-r10 + +config MAINBOARD_PART_NUMBER + string + default "PM-LX2-800-R10" + +config IRQ_SLOT_COUNT + int + default 3 + +config PLLMSRlo + hex + default 0x07de0000 + +endif # BOARD_IEI_PM_LX2_800_R10 diff --git a/src/mainboard/iei/pm-lx2-800-r10/devicetree.cb b/src/mainboard/iei/pm-lx2-800-r10/devicetree.cb new file mode 100644 index 0000000000..ff60894fd2 --- /dev/null +++ b/src/mainboard/iei/pm-lx2-800-r10/devicetree.cb @@ -0,0 +1,87 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Video Adapter + device pci 1.2 on end # AES Security Block + chip southbridge/amd/cs5536 + register "lpc_serirq_enable" = "0x000010da" + register "lpc_serirq_polarity" = "0x0000ef25" + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0d0c0700" + register "enable_ide_nand_flash" = "0" + register "enable_USBP4_device" = "0" # 0:host, 1:device + register "enable_USBP4_overcurrent" = "0" + register "com1_enable" = "0" + register "com2_enable" = "0" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci 11.0 on end # IT8888 + device pci e.0 on end # RTL8100C + device pci f.0 on # ISA Bridge + chip superio/smsc/smscsuperio # SMSC SCH3114 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + + device pnp 2e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + + device pnp 2e.5 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + + device pnp 2e.7 on # PS/2 keyboard/mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard + irq 0x72 = 12 # Mouse + end + + device pnp 2e.a on # Runtime Register + io 0x60 = 0x400 + end + end + end + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device lapic_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end +end diff --git a/src/mainboard/iei/pm-lx2-800-r10/irq_tables.c b/src/mainboard/iei/pm-lx2-800-r10/irq_tables.c new file mode 100644 index 0000000000..2bbf2180e8 --- /dev/null +++ b/src/mainboard/iei/pm-lx2-800-r10/irq_tables.c @@ -0,0 +1,134 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/pci_ids.h> +#include <arch/pirq_routing.h> + +/* Platform IRQs */ +#define PIRQA 10 +#define PIRQB 10 +#define PIRQC 11 +#define PIRQD 11 + +/* Links */ +#define L_PIRQN 0 +#define L_PIRQA 1 +#define L_PIRQB 2 +#define L_PIRQC 3 +#define L_PIRQD 4 + +/* Bitmaps */ +#define B_LINKN (0) +#define B_LINK0 (1 << PIRQA) +#define B_LINK1 (1 << PIRQB) +#define B_LINK2 (1 << PIRQC) +#define B_LINK3 (1 << PIRQD) + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x0f << 3) | 0x0, /* Interrupt router dev */ + (B_LINK0 | B_LINK1 | B_LINK2 | B_LINK3),/* IRQs devoted exclusively to PCI usage */ + PCI_VENDOR_ID_AMD, /* Vendor */ + PCI_DEVICE_ID_AMD_CS5536_ISA, /* Device */ + 0, /* Miniport */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, + 0x27, /* Checksum */ + { + [0] = { /* Host bridge */ + .slot = 0x00, + .bus = 0x00, + .devfn = (0x01 << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQA, + .bitmap = B_LINK0 + }, + [1] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [2] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [3] = { + .link = L_PIRQN, + .bitmap = B_LINKN + } + } + }, + + [1] = { /* ISA bridge */ + .slot = 0x00, + .bus = 0x00, + .devfn = (0x0f << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [1] = { + .link = L_PIRQB, + .bitmap = B_LINK1 + }, + [2] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [3] = { + .link = L_PIRQD, + .bitmap = B_LINK3 + } + } + }, + + [2] = { /* Ethernet */ + .slot = 0x00, + .bus = 0x00, + .devfn = (0x0e << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQD, + .bitmap = B_LINK3 + }, + [1] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [2] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [3] = { + .link = L_PIRQN, + .bitmap = B_LINKN + } + } + } + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr); +} diff --git a/src/mainboard/iei/pm-lx2-800-r10/mainboard.c b/src/mainboard/iei/pm-lx2-800-r10/mainboard.c new file mode 100644 index 0000000000..9ba687f920 --- /dev/null +++ b/src/mainboard/iei/pm-lx2-800-r10/mainboard.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/pci.h> +#include <device/device.h> +#include <boot/tables.h> + +/* SCH3114 runtime register (RTR) address. */ +#define SCH3114_RTR_ADDR (0x400) +/* H/W Monitoring register block index. */ +#define SCH3114_RTR_HWM_IDX (SCH3114_RTR_ADDR + 0x70) +/* H/W Monitoring register block data. */ +#define SCH3114_RTR_HWM_DAT (SCH3114_RTR_ADDR + 0x71) +/* H/W Monitoring Ready/Lock/Start register. */ +#define SCH3114_HWM_RLS_REG (0x40) + +static void init(struct device *dev) +{ + /* SCH3114: enable hardware monitor. */ + printk(BIOS_INFO, "Enabling SCH3114 hardware monitor\n"); + outb(SCH3114_HWM_RLS_REG, SCH3114_RTR_HWM_IDX); + outb(inb(SCH3114_RTR_HWM_DAT) | 0x01, SCH3114_RTR_HWM_DAT); +} + +static void enable_dev(struct device *dev) +{ + dev->ops->init = init; +} + +struct chip_operations mainboard_ops = { + CHIP_NAME("IEI PM-LX2-800-R10 Mainboard") + .enable_dev = enable_dev, +}; diff --git a/src/mainboard/iei/pm-lx2-800-r10/romstage.c b/src/mainboard/iei/pm-lx2-800-r10/romstage.c new file mode 100644 index 0000000000..c6b485f973 --- /dev/null +++ b/src/mainboard/iei/pm-lx2-800-r10/romstage.c @@ -0,0 +1,90 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <spd.h> +#include <arch/io.h> +#include <arch/hlt.h> +#include <arch/llshell.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/lxdef.h> +#include <southbridge/amd/cs5536/cs5536.h> +#include <southbridge/amd/cs5536/early_smbus.c> +#include <southbridge/amd/cs5536/early_setup.c> +#include <superio/smsc/smscsuperio/early_serial.c> + +#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) + +static inline int spd_read_byte(unsigned int device, unsigned int address) +{ + /* Only DIMM0 is available. */ + if (device != DIMM0) + return 0xFF; + + return smbus_read_byte(device, address); +} + +#include <northbridge/amd/lx/raminit.h> +#include <northbridge/amd/lx/pll_reset.c> +#include <northbridge/amd/lx/raminit.c> +#include <lib/generic_sdram.c> +#include <cpu/amd/geode_lx/cpureginit.c> +#include <cpu/amd/geode_lx/syspreinit.c> +#include <cpu/amd/geode_lx/msrinit.c> + +void main(unsigned long bist) +{ + static const struct mem_controller memctrl[] = { + {.channel0 = {DIMM0, DIMM1}} + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Enable COM3. */ + device_t dev = PNP_DEV(0x2e, 0x0b); + u16 port = dev >> 8; + outb(0x55, port); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, 0x3e8); + pnp_set_irq(dev, PNP_IDX_IRQ0, 4); + pnp_set_enable(dev, 1); + outb(0xaa, port); + + report_bist_failure(bist); + + pll_reset(); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + + sdram_initialize(1, memctrl); +} |