diff options
| -rw-r--r-- | src/mainboard/pcengines/apu1/devicetree.cb | 69 | ||||
| -rw-r--r-- | src/mainboard/pcengines/apu1/mptable.c | 11 |
2 files changed, 33 insertions, 47 deletions
diff --git a/src/mainboard/pcengines/apu1/devicetree.cb b/src/mainboard/pcengines/apu1/devicetree.cb index a0a6a35f52..7a60885de6 100644 --- a/src/mainboard/pcengines/apu1/devicetree.cb +++ b/src/mainboard/pcengines/apu1/devicetree.cb @@ -26,29 +26,26 @@ chip northbridge/amd/agesa/family14/root_complex device domain 0 on subsystemid 0x1022 0x1510 inherit chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge - chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 off end # Internal Graphics P2P bridge 0x980[2456] - device pci 4.0 on end # PCIE P2P bridge on-board NIC - device pci 5.0 on end # PCIE P2P bridge - device pci 6.0 on end # PCIE P2P bridge PCIe slot - device pci 7.0 on end # PCIE P2P bridge - device pci 8.0 on end # NB/SB Link P2P bridge - end # agesa northbridge +# device pci 18.0 on # northbridge + chip northbridge/amd/agesa/family14 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 off end # Internal Graphics P2P bridge 0x980[2456] + device pci 4.0 on end # PCIE P2P bridge on-board NIC + device pci 5.0 on end # PCIE P2P bridge + device pci 6.0 on end # PCIE P2P bridge PCIe slot + device pci 7.0 on end # PCIE P2P bridge + device pci 8.0 on end # NB/SB Link P2P bridge + end # agesa northbridge - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # OHCI USB 0-4 - device pci 12.1 on end # OHCI USB 0-4 - device pci 12.2 on end # EHCI USB 0-4 - device pci 13.0 on end # OHCI USB 5-9 - device pci 13.1 on end # OHCI USB 5-9 - device pci 13.2 on end # EHCI USB 5-9 - device pci 14.0 on # SM - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # OHCI USB 0-4 + device pci 12.2 on end # EHCI USB 0-4 + device pci 13.0 on end # OHCI USB 5-9 + device pci 13.2 on end # EHCI USB 5-9 + device pci 14.0 on end # SMBus + device pci 14.1 off end # IDE 0x439c + device pci 14.2 off end # HDA 0x4383 device pci 14.3 on # LPC 0x439d chip superio/nuvoton/nct5104d register "irq_trigger_type" = "0" @@ -76,20 +73,20 @@ chip northbridge/amd/agesa/family14/root_complex device pnp 2e.607 off end device pnp 2e.e off end end - end #LPC - device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # OHCI FS/LS USB - #device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 on end # PCIe PortA - device pci 15.1 off end # PCIe PortB - device pci 15.2 off end # PCIe PortC - device pci 15.3 off end # PCIe PortD - device pci 16.0 on end # OHCI USB 10-13 - device pci 16.2 on end # EHCI USB 10-13 - register "gpp_configuration" = "0" - register "disconnect_pcib" = "1" - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 + end #LPC + device pci 14.4 on end # PCIB 0x4384 + device pci 14.5 off end # OHCI FS/LS USB + #device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 on end # PCIe PortA + device pci 15.1 off end # PCIe PortB + device pci 15.2 off end # PCIe PortC + device pci 15.3 off end # PCIe PortD + device pci 16.0 on end # OHCI USB 10-13 + device pci 16.2 on end # EHCI USB 10-13 + register "gpp_configuration" = "0" + register "disconnect_pcib" = "1" + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 # end # device pci 18.0 # These seem unnecessary device pci 18.0 on end diff --git a/src/mainboard/pcengines/apu1/mptable.c b/src/mainboard/pcengines/apu1/mptable.c index 18bdb97d30..03fa9f37d6 100644 --- a/src/mainboard/pcengines/apu1/mptable.c +++ b/src/mainboard/pcengines/apu1/mptable.c @@ -114,17 +114,6 @@ static void *smp_write_config_table(void *v) PCI_INT(0x3, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ PCI_INT(0x4, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ - /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0 */ - PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ - PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ - PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ - PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ - } - /* PCIe PortA */ PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ /* PCIe PortB */ |