diff options
-rw-r--r-- | src/mainboard/msi/ms7721/Kconfig | 1 | ||||
-rw-r--r-- | src/mainboard/msi/ms7721/romstage.c | 136 |
2 files changed, 36 insertions, 101 deletions
diff --git a/src/mainboard/msi/ms7721/Kconfig b/src/mainboard/msi/ms7721/Kconfig index 1fe6dd2079..7a2623b80b 100644 --- a/src/mainboard/msi/ms7721/Kconfig +++ b/src/mainboard/msi/ms7721/Kconfig @@ -20,7 +20,6 @@ if BOARD_MSI_MS7721 config BOARD_SPECIFIC_OPTIONS # dummy def_bool y - select AGESA_LEGACY select CPU_AMD_AGESA_FAMILY15_TN select NORTHBRIDGE_AMD_AGESA_FAMILY15_TN select SOUTHBRIDGE_AMD_AGESA_HUDSON diff --git a/src/mainboard/msi/ms7721/romstage.c b/src/mainboard/msi/ms7721/romstage.c index 5f769b3b65..b82dfa67c4 100644 --- a/src/mainboard/msi/ms7721/romstage.c +++ b/src/mainboard/msi/ms7721/romstage.c @@ -15,31 +15,18 @@ * GNU General Public License for more details. */ -#include <northbridge/amd/agesa/agesawrapper.h> -#include <northbridge/amd/agesa/agesa_helper.h> - -#include <arch/acpi.h> -#include <arch/cpu.h> #include <arch/io.h> -#include <arch/stages.h> -#include <cbmem.h> #include <console/console.h> -#include <cpu/amd/agesa/s3_resume.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/lapic.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <device/pnp_def.h> +#include <device/pnp.h> +#include <stdint.h> + +#include <northbridge/amd/agesa/state_machine.h> #include <southbridge/amd/common/amd_defs.h> #include <southbridge/amd/agesa/hudson/hudson.h> -#include <southbridge/amd/agesa/hudson/smbus.h> #include <superio/fintek/common/fintek.h> #include <superio/fintek/f71869ad/f71869ad.h> -#include <stdint.h> -#include <string.h> #define MMIO_NON_POSTED_START 0xfed00000 #define MMIO_NON_POSTED_END 0xfedfffff @@ -123,91 +110,40 @@ static void sbxxx_enable_48mhzout(void) SB_MMIO_MISC32(0x40) = reg32; } -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) + +void board_BeforeAgesa(struct sysinfo *cb) { - u32 val; u8 byte; pci_devfn_t dev; - /* Must come first to enable PCI MMCONF. */ - amd_initmmio(); - -#if IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE) - hudson_pci_port80(); -#endif -#if IS_ENABLED(CONFIG_POST_DEVICE_LPC) - hudson_lpc_port80(); -#endif - - if (!cpu_init_detectedx && boot_cpu()) { - - /* enable SIO LPC decode */ - dev = PCI_DEV(0, 0x14, 3); - byte = pci_read_config8(dev, 0x48); - byte |= 3; /* 2e, 2f */ - pci_write_config8(dev, 0x48, byte); - - /* enable serial decode */ - byte = pci_read_config8(dev, 0x44); - byte |= (1 << 6); /* 0x3f8 */ - pci_write_config8(dev, 0x44, byte); - - post_code(0x30); - - /* enable SB MMIO space */ - outb(0x24, 0xcd6); - outb(0x1, 0xcd7); - - /* enable SIO clock */ - sbxxx_enable_48mhzout(); - - /* Initialize GPIO registers */ - gpio_init(GPIO_DEV); - - /* Enable serial console */ - fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* turn on secondary smbus at b20 */ - outb(0x28, 0xcd6); - byte = inb(0xcd7); - byte |= 1; - outb(byte, 0xcd7); - } - - /* Halt if there was a built in self test failure */ - post_code(0x34); - report_bist_failure(bist); - - /* Load MPB */ - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - post_code(0x37); - agesawrapper_amdinitreset(); - post_code(0x39); - - agesawrapper_amdinitearly(); - int s3resume = acpi_is_wakeup_s3(); - if (!s3resume) { - post_code(0x40); - agesawrapper_amdinitpost(); - post_code(0x41); - agesawrapper_amdinitenv(); - disable_cache_as_ram(); - } else { /* S3 detect */ - printk(BIOS_INFO, "S3 detected\n"); - post_code(0x60); - agesawrapper_amdinitresume(); - amd_initcpuio(); - agesawrapper_amds3laterestore(); - post_code(0x61); - prepare_for_resume(); - } - - post_code(0x50); - copy_and_run(); - - post_code(0x54); /* Should never see this post code. */ + if (IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE)) + hudson_pci_port80(); + else if (IS_ENABLED(CONFIG_POST_DEVICE_LPC)) + hudson_lpc_port80(); + + /* enable SIO LPC decode */ + dev = PCI_DEV(0, 0x14, 3); + byte = pci_read_config8(dev, 0x48); + byte |= 3; /* 2e, 2f */ + pci_write_config8(dev, 0x48, byte); + + /* enable serial decode */ + byte = pci_read_config8(dev, 0x44); + byte |= (1 << 6); /* 0x3f8 */ + pci_write_config8(dev, 0x44, byte); + + post_code(0x30); + + /* enable SB MMIO space */ + outb(0x24, 0xcd6); + outb(0x1, 0xcd7); + + /* enable SIO clock */ + sbxxx_enable_48mhzout(); + + /* Initialize GPIO registers */ + gpio_init(GPIO_DEV); + + /* Enable serial console */ + fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); } |