diff options
| -rw-r--r-- | src/mainboard/cubietech/cubieboard/romstage.c | 28 |
1 files changed, 25 insertions, 3 deletions
diff --git a/src/mainboard/cubietech/cubieboard/romstage.c b/src/mainboard/cubietech/cubieboard/romstage.c index 1b4d886b2a..199842b317 100644 --- a/src/mainboard/cubietech/cubieboard/romstage.c +++ b/src/mainboard/cubietech/cubieboard/romstage.c @@ -1,10 +1,17 @@ /* - * Placeholder for Cubieboard romstage + * Basic romstage for Cubieboard + * + * Set up system voltages, then increase the CPU clock, before turning control + * to ramstage. The CPU VDD needs to be properly set before it can run at full + * speed. Setting the CPU at full speed helps lzma-decompress ramstage a lot + * faster. * * Copyright (C) 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com> * Subject to the GNU GPL v2, or (at your option) any later version. */ +#include <arch/stages.h> +#include <cbfs.h> #include <console/console.h> #include <cpu/allwinner/a10/clock.h> #include <cpu/allwinner/a10/gpio.h> @@ -63,10 +70,25 @@ static enum cb_err cubieboard_setup_power(void) void main(void) { + void *entry; + enum cb_err err; + console_init(); - printk(BIOS_INFO, "You have managed to succesfully load romstage.\n"); /* Configure power rails */ - cubieboard_setup_power(); + err = cubieboard_setup_power(); + + if (err == CB_SUCCESS) { + /* TODO: Get this clock from devicetree.cb */ + a1x_set_cpu_clock(1008); + } else { + /* cubieboard_setup_power() prints more details */ + printk(BIOS_WARNING, "Will run CPU at reduced speed\n"); + a1x_set_cpu_clock(384); + } + + entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram"); + printk(BIOS_INFO, "entry is 0x%p, leaving romstage.\n", entry); + stage_exit(entry); } |