diff options
| -rw-r--r-- | src/southbridge/intel/bd82x6x/azalia.c | 43 |
1 files changed, 20 insertions, 23 deletions
diff --git a/src/southbridge/intel/bd82x6x/azalia.c b/src/southbridge/intel/bd82x6x/azalia.c index 7b51671d7e..2d854a4f23 100644 --- a/src/southbridge/intel/bd82x6x/azalia.c +++ b/src/southbridge/intel/bd82x6x/azalia.c @@ -120,10 +120,9 @@ static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb) static int wait_for_ready(u32 base) { - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ + /* Use a 1msec timeout */ - int timeout = 50; + int timeout = 1000; while(timeout--) { u32 reg32 = read32(base + HDA_ICII_REG); @@ -150,10 +149,9 @@ static int wait_for_valid(u32 base) reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID; write32(base + HDA_ICII_REG, reg32); - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ + /* Use a 1msec timeout */ - int timeout = 50; + int timeout = 1000; while(timeout--) { reg32 = read32(base + HDA_ICII_REG); if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == @@ -254,12 +252,12 @@ static void azalia_init(struct device *dev) if (RCBA32(0x2030) & (1 << 31)) { reg32 = pci_mmio_read_config32(dev, 0x120); reg32 &= 0xf8ffff01; - reg32 |= (1 << 24); // 25 for server + reg32 |= (1 << 24); // 2 << 24 for server reg32 |= RCBA32(0x2030) & 0xfe; pci_mmio_write_config32(dev, 0x120, reg32); reg16 = pci_mmio_read_config16(dev, 0x78); - reg16 &= ~(1 << 11); + reg16 |= (1 << 11); pci_mmio_write_config16(dev, 0x78, reg16); } else printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n"); @@ -269,12 +267,9 @@ static void azalia_init(struct device *dev) pci_mmio_write_config32(dev, 0x114, reg32); // Set VCi enable bit - if (pci_mmio_read_config32(dev, 0x120) & ((1 << 24) | - (1 << 25) | (1 << 26))) { - reg32 = pci_mmio_read_config32(dev, 0x120); - reg32 |= (1 << 31); - pci_mmio_write_config32(dev, 0x120, reg32); - } + reg32 = pci_mmio_read_config32(dev, 0x120); + reg32 |= (1 << 31); + pci_mmio_write_config32(dev, 0x120, reg32); // Enable HDMI codec: reg32 = pci_read_config32(dev, 0xc4); @@ -287,15 +282,6 @@ static void azalia_init(struct device *dev) /* Additional programming steps */ reg32 = pci_read_config32(dev, 0xc4); - reg32 |= (1 << 13) | (1 << 10); - pci_write_config32(dev, 0xc4, reg32); - - reg32 = pci_read_config32(dev, 0xd0); - reg32 &= ~(1 << 31); - pci_write_config32(dev, 0xd0, reg32); - - /* Additional programming steps */ - reg32 = pci_read_config32(dev, 0xc4); reg32 |= (1 << 13); pci_write_config32(dev, 0xc4, reg32); @@ -307,6 +293,13 @@ static void azalia_init(struct device *dev) reg32 &= ~(1 << 31); pci_write_config32(dev, 0xd0, reg32); + if (dev->device == 0x1e20) { + /* Additional step on Panther Point */ + reg32 = pci_read_config32(dev, 0xc4); + reg32 |= (1 << 17); + pci_write_config32(dev, 0xc4, reg32); + } + /* Set Bus Master */ reg32 = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); @@ -314,9 +307,13 @@ static void azalia_init(struct device *dev) pci_write_config8(dev, 0x3c, 0x0a); // unused? /* Codec Initialization Programming Sequence */ + + /* Take controller out of reset */ reg32 = read32(base + 0x08); reg32 |= (1 << 0); write32(base + 0x08, reg32); + /* Wait 1ms */ + udelay(1000); // reg8 = pci_read_config8(dev, 0x40); // Audio Control |