diff options
21 files changed, 60 insertions, 56 deletions
diff --git a/src/superio/ite/it8661f/Config.lb b/src/superio/ite/it8661f/Config.lb index 6a4d526a7c..a03c28b1c8 100644 --- a/src/superio/ite/it8661f/Config.lb +++ b/src/superio/ite/it8661f/Config.lb @@ -20,3 +20,4 @@ config chip.h object superio.o + diff --git a/src/superio/ite/it8661f/chip.h b/src/superio/ite/it8661f/chip.h index 4931655178..691f0e2ab5 100644 --- a/src/superio/ite/it8661f/chip.h +++ b/src/superio/ite/it8661f/chip.h @@ -23,14 +23,12 @@ /* This chip doesn't seem to have keyboard and mouse support. */ -/* #include <pc80/keyboard.h> */ #include <uart8250.h> extern struct chip_operations superio_ite_it8661f_ops; struct superio_ite_it8661f_config { struct uart8250 com1, com2; - /* struct pc_keyboard keyboard; */ }; #endif /* _SUPERIO_ITE_IT8661F */ diff --git a/src/superio/ite/it8661f/it8661f.h b/src/superio/ite/it8661f/it8661f.h index 434aebc2f7..09059810f5 100644 --- a/src/superio/ite/it8661f/it8661f.h +++ b/src/superio/ite/it8661f/it8661f.h @@ -19,7 +19,7 @@ */ /* Datasheet: http://www.ite.com.tw/product_info/PC/Brief-IT8661_2.asp */ -/* Status: untested on real hardware, but it compiles. */ +/* Status: Untested on real hardware, but it compiles. */ /* This chip doesn't seem to have keyboard and mouse support. */ diff --git a/src/superio/ite/it8661f/it8661f_early_serial.c b/src/superio/ite/it8661f/it8661f_early_serial.c index ffec3bcd30..522ddf71cf 100644 --- a/src/superio/ite/it8661f/it8661f_early_serial.c +++ b/src/superio/ite/it8661f/it8661f_early_serial.c @@ -26,7 +26,7 @@ #define SIO_INDEX SIO_BASE #define SIO_DATA SIO_BASE+1 -/* Global Configuration Registers. */ +/* Global configuration registers. */ #define IT8661F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ #define IT8661F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ #define IT8661F_CONFIG_REG_LDE 0x23 /* PnP Logical Device Enable. */ @@ -35,7 +35,7 @@ #define IT8661F_CONFIGURATION_PORT 0x0279 /* Write-only. */ /* Special values used for entering MB PnP mode. The first four bytes of - * each line determine the address port, the last four are data. */ + each line determine the address port, the last four are data. */ static const uint8_t init_values[] = { 0x6a, 0xb5, 0xda, 0xed, /**/ 0xf6, 0xfb, 0x7d, 0xbe, 0xdf, 0x6f, 0x37, 0x1b, /**/ 0x0d, 0x86, 0xc3, 0x61, @@ -44,7 +44,7 @@ static const uint8_t init_values[] = { }; /* The content of IT8661F_CONFIG_REG_LDN (index 0x07) must be set to the - * LDN the register belongs to, before you can access the register. */ + LDN the register belongs to, before you can access the register. */ static void it8661f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) { outb(IT8661F_CONFIG_REG_LDN, SIO_BASE); @@ -53,7 +53,7 @@ static void it8661f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) outb(value, SIO_DATA); } -/* Enable the peripheral devices on the IT8661F Super IO chip. */ +/* Enable the peripheral devices on the IT8661F Super I/O chip. */ static void it8661f_enable_serial(device_t dev, unsigned iobase) { uint8_t i; @@ -88,10 +88,10 @@ static void it8661f_enable_serial(device_t dev, unsigned iobase) it8661f_sio_write(IT8661F_IR, 0x30, 0x1); /* IR */ /* Select 24MHz CLKIN (clear bit 1) and clear software suspend mode - (clear bit 0). */ + (clear bit 0). */ it8661f_sio_write(0x00, IT8661F_CONFIG_REG_SWSUSP, 0x00); /* (3) Exit the configuration state (MB PnP mode). */ - it8661f_sio_write(0x00, IT8661F_CONFIG_REG_CC, 0x02); + it8661f_sio_write(0x00, IT8661F_CONFIG_REG_CC, 0x02); } diff --git a/src/superio/ite/it8671f/Config.lb b/src/superio/ite/it8671f/Config.lb index 6a4d526a7c..a03c28b1c8 100644 --- a/src/superio/ite/it8671f/Config.lb +++ b/src/superio/ite/it8671f/Config.lb @@ -20,3 +20,4 @@ config chip.h object superio.o + diff --git a/src/superio/ite/it8671f/it8671f_early_serial.c b/src/superio/ite/it8671f/it8671f_early_serial.c index 1c30ff5723..68cfcd4cac 100644 --- a/src/superio/ite/it8671f/it8671f_early_serial.c +++ b/src/superio/ite/it8671f/it8671f_early_serial.c @@ -26,7 +26,7 @@ #define SIO_INDEX SIO_BASE #define SIO_DATA SIO_BASE+1 -/* Global Configuration Registers. */ +/* Global configuration registers. */ #define IT8671F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ #define IT8671F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ #define IT8671F_CONFIG_REG_LDE 0x23 /* PnP Logical Device Enable. */ @@ -35,7 +35,7 @@ #define IT8671F_CONFIGURATION_PORT 0x0279 /* Write-only. */ /* Special values used for entering MB PnP mode. The first four bytes of - * each line determine the address port, the last four are data. */ + each line determine the address port, the last four are data. */ static const uint8_t init_values[] = { 0x6a, 0xb5, 0xda, 0xed, /**/ 0xf6, 0xfb, 0x7d, 0xbe, 0xdf, 0x6f, 0x37, 0x1b, /**/ 0x0d, 0x86, 0xc3, 0x61, @@ -44,7 +44,7 @@ static const uint8_t init_values[] = { }; /* The content of IT8671F_CONFIG_REG_LDN (index 0x07) must be set to the - * LDN the register belongs to, before you can access the register. */ + LDN the register belongs to, before you can access the register. */ static void it8671f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) { outb(IT8671F_CONFIG_REG_LDN, SIO_BASE); @@ -53,7 +53,7 @@ static void it8671f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) outb(value, SIO_DATA); } -/* Enable the peripheral devices on the IT8671F Super IO chip. */ +/* Enable the peripheral devices on the IT8671F Super I/O chip. */ static void it8671f_enable_serial(device_t dev, unsigned iobase) { uint8_t i; @@ -80,7 +80,7 @@ static void it8671f_enable_serial(device_t dev, unsigned iobase) PP (3), Reserved (4), KBCK (5), KBCM (6), Reserved (7). */ it8671f_sio_write(0x00, IT8671F_CONFIG_REG_LDE, 0x6f); - /* Activate all devices. */ + /* Activate all devices. */ it8671f_sio_write(IT8671F_FDC, 0x30, 0x01); /* Floppy */ it8671f_sio_write(IT8671F_SP1, 0x30, 0x01); /* Serial port 1 */ it8671f_sio_write(IT8671F_SP2, 0x30, 0x01); /* Serial port 2 */ @@ -93,6 +93,6 @@ static void it8671f_enable_serial(device_t dev, unsigned iobase) it8671f_sio_write(0x00, IT8671F_CONFIG_REG_SWSUSP, 0x00); /* (3) Exit the configuration state (MB PnP mode). */ - it8671f_sio_write(0x00, IT8671F_CONFIG_REG_CC, 0x02); + it8671f_sio_write(0x00, IT8671F_CONFIG_REG_CC, 0x02); } diff --git a/src/superio/ite/it8673f/Config.lb b/src/superio/ite/it8673f/Config.lb index 6a4d526a7c..a03c28b1c8 100644 --- a/src/superio/ite/it8673f/Config.lb +++ b/src/superio/ite/it8673f/Config.lb @@ -20,3 +20,4 @@ config chip.h object superio.o + diff --git a/src/superio/ite/it8673f/it8673f.h b/src/superio/ite/it8673f/it8673f.h index d3e577ec15..8513a18282 100644 --- a/src/superio/ite/it8673f/it8673f.h +++ b/src/superio/ite/it8673f/it8673f.h @@ -19,7 +19,7 @@ */ /* Datasheet: http://www.datasheet4u.com/html/I/T/8/IT8673F_ITE.pdf.html */ -/* Status: untested on real hardware, but it compiles. */ +/* Status: Untested on real hardware, but it compiles. */ #define IT8673F_FDC 0x00 /* Floppy */ #define IT8673F_SP1 0x01 /* Com1 */ diff --git a/src/superio/ite/it8673f/it8673f_early_serial.c b/src/superio/ite/it8673f/it8673f_early_serial.c index 3047a76299..3c8c492149 100644 --- a/src/superio/ite/it8673f/it8673f_early_serial.c +++ b/src/superio/ite/it8673f/it8673f_early_serial.c @@ -26,7 +26,7 @@ #define SIO_INDEX SIO_BASE #define SIO_DATA SIO_BASE+1 -/* Global Configuration Registers. */ +/* Global configuration registers. */ #define IT8673F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ #define IT8673F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ #define IT8673F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ @@ -35,7 +35,7 @@ #define IT8673F_CONFIGURATION_PORT 0x0279 /* Write-only. */ /* Special values used for entering MB PnP mode. The first four bytes of - * each line determine the address port, the last four are data. */ + each line determine the address port, the last four are data. */ static const uint8_t init_values[] = { 0x6a, 0xb5, 0xda, 0xed, /**/ 0xf6, 0xfb, 0x7d, 0xbe, 0xdf, 0x6f, 0x37, 0x1b, /**/ 0x0d, 0x86, 0xc3, 0x61, @@ -44,7 +44,7 @@ static const uint8_t init_values[] = { }; /* The content of IT8673F_CONFIG_REG_LDN (index 0x07) must be set to the - * LDN the register belongs to, before you can access the register. */ + LDN the register belongs to, before you can access the register. */ static void it8673f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) { outb(IT8673F_CONFIG_REG_LDN, SIO_BASE); @@ -53,7 +53,7 @@ static void it8673f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) outb(value, SIO_DATA); } -/* Enable the peripheral devices on the IT8673F Super IO chip. */ +/* Enable the peripheral devices on the IT8673F Super I/O chip. */ static void it8673f_enable_serial(device_t dev, unsigned iobase) { uint8_t i; @@ -92,6 +92,6 @@ static void it8673f_enable_serial(device_t dev, unsigned iobase) it8673f_sio_write(0x00, IT8673F_CONFIG_REG_SWSUSP, 0x00); /* (3) Exit the configuration state (MB PnP mode). */ - it8673f_sio_write(0x00, IT8673F_CONFIG_REG_CC, 0x02); + it8673f_sio_write(0x00, IT8673F_CONFIG_REG_CC, 0x02); } diff --git a/src/superio/ite/it8705f/Config.lb b/src/superio/ite/it8705f/Config.lb index 6a4d526a7c..a03c28b1c8 100644 --- a/src/superio/ite/it8705f/Config.lb +++ b/src/superio/ite/it8705f/Config.lb @@ -20,3 +20,4 @@ config chip.h object superio.o + diff --git a/src/superio/ite/it8705f/it8705f.h b/src/superio/ite/it8705f/it8705f.h index 54a2b28744..75a2a9d047 100644 --- a/src/superio/ite/it8705f/it8705f.h +++ b/src/superio/ite/it8705f/it8705f.h @@ -19,7 +19,7 @@ */ /* Datasheet: http://www.ite.com.tw/product_info/PC/Brief-IT8705_2.asp */ -/* Status: untested on real hardware, but it compiles. */ +/* Status: Untested on real hardware, but it compiles. */ /* Note: This should also work on an IT8705AF, they're almost the same. */ /* This chip doesn't seem to have keyboard and mouse support. */ diff --git a/src/superio/ite/it8705f/it8705f_early_serial.c b/src/superio/ite/it8705f/it8705f_early_serial.c index eca0d620be..3ae512725a 100644 --- a/src/superio/ite/it8705f/it8705f_early_serial.c +++ b/src/superio/ite/it8705f/it8705f_early_serial.c @@ -26,19 +26,19 @@ #define SIO_INDEX SIO_BASE #define SIO_DATA SIO_BASE+1 -/* Global Configuration Registers. */ +/* Global configuration registers. */ #define IT8705F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ #define IT8705F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ #define IT8705F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ /* WTF? 0x23 and 0x24 are swapped here (when compared to other IT87xx). */ -#define IT8705F_CONFIG_REG_CLOCKSEL 0x24 /* Clock Selection. */ -#define IT8705F_CONFIG_REG_SWSUSP 0x23 /* Software Suspend, Flash I/F. */ +#define IT8705F_CONFIG_REG_CLOCKSEL 0x24 /* Clock Selection, Flash I/F. */ +#define IT8705F_CONFIG_REG_SWSUSP 0x23 /* Software Suspend. */ #define IT8705F_CONFIGURATION_PORT 0x2e /* Write-only. */ /* The content of IT8705F_CONFIG_REG_LDN (index 0x07) must be set to the - * LDN the register belongs to, before you can access the register. */ + LDN the register belongs to, before you can access the register. */ static void it8705f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) { outb(IT8705F_CONFIG_REG_LDN, SIO_BASE); @@ -47,7 +47,7 @@ static void it8705f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) outb(value, SIO_DATA); } -/* Enable the peripheral devices on the IT8705F Super IO chip. */ +/* Enable the peripheral devices on the IT8705F Super I/O chip. */ static void it8705f_enable_serial(device_t dev, unsigned iobase) { /* (1) Enter the configuration state (MB PnP mode). */ @@ -63,8 +63,8 @@ static void it8705f_enable_serial(device_t dev, unsigned iobase) /* (2) Modify the data of configuration registers. */ /* Select the chip to configure (if there's more than one). - * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. - * If this register is not written, both chips are configured. */ + Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. + If this register is not written, both chips are configured. */ /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CONFIGSEL, 0x00); */ /* Enable all devices. */ @@ -73,18 +73,17 @@ static void it8705f_enable_serial(device_t dev, unsigned iobase) it8705f_sio_write(IT8705F_SP2, 0x30, 0x1); /* Serial port 2 */ it8705f_sio_write(IT8705F_PP, 0x30, 0x1); /* Parallel port */ it8705f_sio_write(IT8705F_EC, 0x30, 0x1); /* Environment controller */ - /* GPIO */ it8705f_sio_write(IT8705F_GAME, 0x30, 0x1); /* GAME port */ it8705f_sio_write(IT8705F_IR, 0x30, 0x1); /* Consumer IR */ it8705f_sio_write(IT8705F_MIDI, 0x30, 0x1); /* MIDI port */ /* Select 24MHz/48MHz CLKIN (set/clear bit 0). TODO: Needed? */ - /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CLOCKSEL, 0x00); */ + /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CLOCKSEL, 0x01); */ /* Clear software suspend mode (clear bit 0). TODO: Needed? */ /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_SWSUSP, 0x00); */ /* (3) Exit the configuration state (MB PnP mode). */ - it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CC, 0x02); + it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CC, 0x02); } diff --git a/src/superio/ite/it8712f/Config.lb b/src/superio/ite/it8712f/Config.lb index 6a4d526a7c..a03c28b1c8 100644 --- a/src/superio/ite/it8712f/Config.lb +++ b/src/superio/ite/it8712f/Config.lb @@ -20,3 +20,4 @@ config chip.h object superio.o + diff --git a/src/superio/ite/it8712f/it8712f.h b/src/superio/ite/it8712f/it8712f.h index dd0413a736..22edd9061b 100644 --- a/src/superio/ite/it8712f/it8712f.h +++ b/src/superio/ite/it8712f/it8712f.h @@ -19,7 +19,7 @@ */ /* Datasheet: http://www.ite.com.tw/product_info/PC/Brief-IT8712_2.asp */ -/* Status: untested on real hardware, but it compiles. */ +/* Status: Untested on real hardware, but it compiles. */ #define IT8712F_FDC 0x00 /* Floppy */ #define IT8712F_SP1 0x01 /* Com1 */ diff --git a/src/superio/ite/it8712f/it8712f_early_serial.c b/src/superio/ite/it8712f/it8712f_early_serial.c index dc6b266494..e0828dfbf8 100644 --- a/src/superio/ite/it8712f/it8712f_early_serial.c +++ b/src/superio/ite/it8712f/it8712f_early_serial.c @@ -26,7 +26,7 @@ #define SIO_INDEX SIO_BASE #define SIO_DATA SIO_BASE+1 -/* Global Configuration Registers. */ +/* Global configuration registers. */ #define IT8712F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ #define IT8712F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ #define IT8712F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ @@ -36,7 +36,7 @@ #define IT8712F_CONFIGURATION_PORT 0x2e /* Write-only. */ /* The content of IT8712F_CONFIG_REG_LDN (index 0x07) must be set to the - * LDN the register belongs to, before you can access the register. */ + LDN the register belongs to, before you can access the register. */ static void it8712f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) { outb(IT8712F_CONFIG_REG_LDN, SIO_BASE); @@ -45,7 +45,7 @@ static void it8712f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) outb(value, SIO_DATA); } -/* Enable the peripheral devices on the IT8712F Super IO chip. */ +/* Enable the peripheral devices on the IT8712F Super I/O chip. */ static void it8712f_enable_serial(device_t dev, unsigned iobase) { /* (1) Enter the configuration state (MB PnP mode). */ @@ -61,8 +61,8 @@ static void it8712f_enable_serial(device_t dev, unsigned iobase) /* (2) Modify the data of configuration registers. */ /* Select the chip to configure (if there's more than one). - * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. - * If this register is not written, both chips are configured. */ + Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. + If this register is not written, both chips are configured. */ /* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CONFIGSEL, 0x00); */ /* Enable all devices. */ @@ -78,12 +78,12 @@ static void it8712f_enable_serial(device_t dev, unsigned iobase) it8712f_sio_write(IT8712F_IR, 0x30, 0x1); /* Consumer IR */ /* Select 24MHz/48MHz CLKIN (set/clear bit 0). TODO: Needed? */ - /* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CLOCKSEL, 0x00); */ + /* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CLOCKSEL, 0x01); */ /* Clear software suspend mode (clear bit 0). TODO: Needed? */ /* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_SWSUSP, 0x00); */ /* (3) Exit the configuration state (MB PnP mode). */ - it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02); + it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02); } diff --git a/src/superio/ite/it8716f/Config.lb b/src/superio/ite/it8716f/Config.lb index 6a4d526a7c..a03c28b1c8 100644 --- a/src/superio/ite/it8716f/Config.lb +++ b/src/superio/ite/it8716f/Config.lb @@ -20,3 +20,4 @@ config chip.h object superio.o + diff --git a/src/superio/ite/it8716f/it8716f.h b/src/superio/ite/it8716f/it8716f.h index f83912484b..6afb58d8be 100644 --- a/src/superio/ite/it8716f/it8716f.h +++ b/src/superio/ite/it8716f/it8716f.h @@ -19,7 +19,7 @@ */ /* Datasheet: http://www.ite.com.tw/product_info/PC/Brief-IT8716_2.asp */ -/* Status: untested on real hardware, but it compiles. */ +/* Status: Untested on real hardware, but it compiles. */ #define IT8716F_FDC 0x00 /* Floppy */ #define IT8716F_SP1 0x01 /* Com1 */ diff --git a/src/superio/ite/it8716f/it8716f_early_serial.c b/src/superio/ite/it8716f/it8716f_early_serial.c index 1865624a13..4dedc8ff6c 100644 --- a/src/superio/ite/it8716f/it8716f_early_serial.c +++ b/src/superio/ite/it8716f/it8716f_early_serial.c @@ -26,7 +26,7 @@ #define SIO_INDEX SIO_BASE #define SIO_DATA SIO_BASE+1 -/* Global Configuration Registers. */ +/* Global configuration registers. */ #define IT8716F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ #define IT8716F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ #define IT8716F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ @@ -36,7 +36,7 @@ #define IT8716F_CONFIGURATION_PORT 0x2e /* Write-only. */ /* The content of IT8716F_CONFIG_REG_LDN (index 0x07) must be set to the - * LDN the register belongs to, before you can access the register. */ + LDN the register belongs to, before you can access the register. */ static void it8716f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) { outb(IT8716F_CONFIG_REG_LDN, SIO_BASE); @@ -45,7 +45,7 @@ static void it8716f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) outb(value, SIO_DATA); } -/* Enable the peripheral devices on the IT8716F Super IO chip. */ +/* Enable the peripheral devices on the IT8716F Super I/O chip. */ static void it8716f_enable_serial(device_t dev, unsigned iobase) { /* (1) Enter the configuration state (MB PnP mode). */ @@ -61,8 +61,8 @@ static void it8716f_enable_serial(device_t dev, unsigned iobase) /* (2) Modify the data of configuration registers. */ /* Select the chip to configure (if there's more than one). - * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. - * If this register is not written, both chips are configured. */ + Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. + If this register is not written, both chips are configured. */ /* it8716f_sio_write(0x00, IT8716F_CONFIG_REG_CONFIGSEL, 0x00); */ /* Enable all devices. */ @@ -78,12 +78,12 @@ static void it8716f_enable_serial(device_t dev, unsigned iobase) it8716f_sio_write(IT8716F_IR, 0x30, 0x1); /* Consumer IR */ /* Select 24MHz/48MHz CLKIN (set/clear bit 0). TODO: Needed? */ - /* it8716f_sio_write(0x00, IT8716F_CONFIG_REG_CLOCKSEL, 0x00); */ + /* it8716f_sio_write(0x00, IT8716F_CONFIG_REG_CLOCKSEL, 0x01); */ /* Clear software suspend mode (clear bit 0). TODO: Needed? */ /* it8716f_sio_write(0x00, IT8716F_CONFIG_REG_SWSUSP, 0x00); */ /* (3) Exit the configuration state (MB PnP mode). */ - it8716f_sio_write(0x00, IT8716F_CONFIG_REG_CC, 0x02); + it8716f_sio_write(0x00, IT8716F_CONFIG_REG_CC, 0x02); } diff --git a/src/superio/ite/it8718f/Config.lb b/src/superio/ite/it8718f/Config.lb index 6a4d526a7c..a03c28b1c8 100644 --- a/src/superio/ite/it8718f/Config.lb +++ b/src/superio/ite/it8718f/Config.lb @@ -20,3 +20,4 @@ config chip.h object superio.o + diff --git a/src/superio/ite/it8718f/it8718f.h b/src/superio/ite/it8718f/it8718f.h index 783d691fc9..5e4ccf0c94 100644 --- a/src/superio/ite/it8718f/it8718f.h +++ b/src/superio/ite/it8718f/it8718f.h @@ -19,7 +19,7 @@ */ /* Datasheet: http://www.ite.com.tw/product_info/PC/Brief-IT8718_2.asp */ -/* Status: untested on real hardware, but it compiles. */ +/* Status: Untested on real hardware, but it compiles. */ #define IT8718F_FDC 0x00 /* Floppy */ #define IT8718F_SP1 0x01 /* Com1 */ diff --git a/src/superio/ite/it8718f/it8718f_early_serial.c b/src/superio/ite/it8718f/it8718f_early_serial.c index a75842dc1f..212f964604 100644 --- a/src/superio/ite/it8718f/it8718f_early_serial.c +++ b/src/superio/ite/it8718f/it8718f_early_serial.c @@ -26,7 +26,7 @@ #define SIO_INDEX SIO_BASE #define SIO_DATA SIO_BASE+1 -/* Global Configuration Registers. */ +/* Global configuration registers. */ #define IT8718F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ #define IT8718F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ #define IT8718F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ @@ -36,7 +36,7 @@ #define IT8718F_CONFIGURATION_PORT 0x2e /* Write-only. */ /* The content of IT8718F_CONFIG_REG_LDN (index 0x07) must be set to the - * LDN the register belongs to, before you can access the register. */ + LDN the register belongs to, before you can access the register. */ static void it8718f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) { outb(IT8718F_CONFIG_REG_LDN, SIO_BASE); @@ -45,7 +45,7 @@ static void it8718f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) outb(value, SIO_DATA); } -/* Enable the peripheral devices on the IT8718F Super IO chip. */ +/* Enable the peripheral devices on the IT8718F Super I/O chip. */ static void it8718f_enable_serial(device_t dev, unsigned iobase) { /* (1) Enter the configuration state (MB PnP mode). */ @@ -61,8 +61,8 @@ static void it8718f_enable_serial(device_t dev, unsigned iobase) /* (2) Modify the data of configuration registers. */ /* Select the chip to configure (if there's more than one). - * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. - * If this register is not written, both chips are configured. */ + Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. + If this register is not written, both chips are configured. */ /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CONFIGSEL, 0x00); */ /* Enable all devices. */ @@ -76,12 +76,12 @@ static void it8718f_enable_serial(device_t dev, unsigned iobase) it8718f_sio_write(IT8718F_IR, 0x30, 0x1); /* Consumer IR */ /* Select 24MHz/48MHz CLKIN (set/clear bit 0). TODO: Needed? */ - /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CLOCKSEL, 0x00); */ + /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CLOCKSEL, 0x01); */ /* Clear software suspend mode (clear bit 0). TODO: Needed? */ /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_SWSUSP, 0x00); */ /* (3) Exit the configuration state (MB PnP mode). */ - it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CC, 0x02); + it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CC, 0x02); } |