diff options
-rw-r--r-- | src/soc/amd/picasso/chip.h | 15 | ||||
-rw-r--r-- | src/soc/amd/picasso/include/soc/southbridge.h | 58 | ||||
-rw-r--r-- | src/soc/amd/picasso/southbridge.c | 74 |
3 files changed, 2 insertions, 145 deletions
diff --git a/src/soc/amd/picasso/chip.h b/src/soc/amd/picasso/chip.h index 2b9ef3c37a..8d4e0d3875 100644 --- a/src/soc/amd/picasso/chip.h +++ b/src/soc/amd/picasso/chip.h @@ -73,21 +73,6 @@ struct soc_amd_picasso_config { uint8_t min_soc_vid_offset; uint8_t aclk_dpm0_freq_400MHz; - /* - * SPI config - * Default values if not overridden by mainboard: - * Read mode - Normal 33MHz - * Normal speed - 66MHz - * Fast speed - 66MHz - * Alt speed - 66MHz - * TPM speed - 66MHz - */ - enum spi_read_mode spi_read_mode; - enum spi100_speed spi_normal_speed; - enum spi100_speed spi_fast_speed; - enum spi100_speed spi_altio_speed; - enum spi100_speed spi_tpm_speed; - enum { SD_EMMC_DISABLE, SD_EMMC_SD_LOW_SPEED, diff --git a/src/soc/amd/picasso/include/soc/southbridge.h b/src/soc/amd/picasso/include/soc/southbridge.h index 602647660a..5bae754cf6 100644 --- a/src/soc/amd/picasso/include/soc/southbridge.h +++ b/src/soc/amd/picasso/include/soc/southbridge.h @@ -240,61 +240,6 @@ #define SATA_CAPABILITIES_REG 0xfc #define SATA_CAPABILITY_SPM BIT(12) -#define SPI_CNTRL0 0x00 -#define SPI_BUSY BIT(31) -enum spi_read_mode { - SPI_READ_MODE_NORMAL33M = 0, - /* 1 is reserved. */ - SPI_READ_MODE_DUAL112 = 2, - SPI_READ_MODE_QUAD114 = 3, - SPI_READ_MODE_DUAL122 = 4, - SPI_READ_MODE_QUAD144 = 5, - SPI_READ_MODE_NORMAL66M = 6, - SPI_READ_MODE_FAST_READ = 7, -}; -/* - * SPI read mode is split into bits 18, 29, 30 such that [30:29:18] correspond to bits [2:0] for - * SpiReadMode. - */ -#define SPI_READ_MODE_MASK (BIT(30) | BIT(29) | BIT(18)) -#define SPI_READ_MODE_UPPER_BITS(x) ((((x) >> 1) & 0x3) << 29) -#define SPI_READ_MODE_LOWER_BITS(x) (((x) & 0x1) << 18) -#define SPI_READ_MODE(x) (SPI_READ_MODE_UPPER_BITS(x) | \ - SPI_READ_MODE_LOWER_BITS(x)) -#define SPI_ACCESS_MAC_ROM_EN BIT(22) -#define SPI_FIFO_PTR_CLR BIT(20) -#define SPI_ARB_ENABLE BIT(19) -#define EXEC_OPCODE BIT(16) -#define SPI_FIFO 0x80 -#define SPI_FIFO_DEPTH (0xc7 - SPI_FIFO) - -#define SPI100_ENABLE 0x20 -#define SPI_USE_SPI100 BIT(0) - -/* Use SPI_SPEED_16M-SPI_SPEED_66M below for the southbridge */ -#define SPI100_SPEED_CONFIG 0x22 -enum spi100_speed { - SPI_SPEED_66M = 0, - SPI_SPEED_33M = 1, - SPI_SPEED_22M = 2, - SPI_SPEED_16M = 3, - SPI_SPEED_100M = 4, - SPI_SPEED_800K = 5, -}; - -#define SPI_SPEED_MASK 0xf -#define SPI_SPEED_MODE(x, shift) (((x) & SPI_SPEED_MASK) << (shift)) -#define SPI_NORM_SPEED(x) SPI_SPEED_MODE(x, 12) -#define SPI_FAST_SPEED(x) SPI_SPEED_MODE(x, 8) -#define SPI_ALT_SPEED(x) SPI_SPEED_MODE(x, 4) -#define SPI_TPM_SPEED(x) SPI_SPEED_MODE(x, 0) - -#define SPI_SPEED_CFG(n, f, a, t) (SPI_NORM_SPEED(n) | SPI_FAST_SPEED(f) | \ - SPI_ALT_SPEED(a) | SPI_TPM_SPEED(t)) - -#define SPI100_HOST_PREF_CONFIG 0x2c -#define SPI_RD4DW_EN_HOST BIT(15) - /* IO 0xcf9 - Reset control port*/ #define FULL_RST BIT(3) #define RST_CMD BIT(2) @@ -329,12 +274,9 @@ struct soc_power_reg { void enable_aoac_devices(void); void sb_clk_output_48Mhz(void); -void sb_disable_4dw_burst(void); void sb_enable(struct device *dev); void southbridge_final(void *chip_info); void southbridge_init(void *chip_info); -void sb_read_mode(u32 mode); -void sb_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm); void fch_pre_init(void); void fch_early_init(void); void set_uart_config(int idx); diff --git a/src/soc/amd/picasso/southbridge.c b/src/soc/amd/picasso/southbridge.c index 6308953fc6..c871ec9f58 100644 --- a/src/soc/amd/picasso/southbridge.c +++ b/src/soc/amd/picasso/southbridge.c @@ -14,6 +14,7 @@ #include <amdblocks/acpimmio.h> #include <amdblocks/lpc.h> #include <amdblocks/acpi.h> +#include <amdblocks/spi.h> #include <soc/cpu.h> #include <soc/southbridge.h> #include <soc/smi.h> @@ -197,77 +198,6 @@ void sb_clk_output_48Mhz(void) misc_write32(MISC_CLK_CNTL1, ctrl); } -static uintptr_t sb_init_spi_base(void) -{ - uintptr_t base; - - /* Make sure the base address is predictable */ - base = lpc_get_spibase(); - - if (base) - return base; - - lpc_set_spibase(SPI_BASE_ADDRESS); - lpc_enable_spi_rom(SPI_ROM_ENABLE); - - return SPI_BASE_ADDRESS; -} - -void sb_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm) -{ - uintptr_t base = sb_init_spi_base(); - - write16((void *)(base + SPI100_SPEED_CONFIG), SPI_SPEED_CFG(norm, fast, alt, tpm)); - write16((void *)(base + SPI100_ENABLE), SPI_USE_SPI100); -} - -void sb_disable_4dw_burst(void) -{ - uintptr_t base = sb_init_spi_base(); - write16((void *)(base + SPI100_HOST_PREF_CONFIG), - read16((void *)(base + SPI100_HOST_PREF_CONFIG)) - & ~SPI_RD4DW_EN_HOST); -} - -void sb_read_mode(u32 mode) -{ - uintptr_t base = sb_init_spi_base(); - uint32_t val = (read32((void *)(base + SPI_CNTRL0)) & ~SPI_READ_MODE_MASK); - - write32((void *)(base + SPI_CNTRL0), val | SPI_READ_MODE(mode)); -} - -static void sb_spi_config_mb_modes(void) -{ - const struct soc_amd_picasso_config *cfg = config_of_soc(); - - sb_read_mode(cfg->spi_read_mode); - sb_set_spi100(cfg->spi_normal_speed, cfg->spi_fast_speed, cfg->spi_altio_speed, - cfg->spi_tpm_speed); -} - -static void sb_spi_config_em100_modes(void) -{ - sb_read_mode(SPI_READ_MODE_NORMAL33M); - sb_set_spi100(SPI_SPEED_16M, SPI_SPEED_16M, SPI_SPEED_16M, SPI_SPEED_16M); -} - -static void sb_spi_config_modes(void) -{ - if (CONFIG(EM100)) - sb_spi_config_em100_modes(); - else - sb_spi_config_mb_modes(); -} - -static void sb_spi_init(void) -{ - lpc_enable_spi_prefetch(); - sb_init_spi_base(); - sb_disable_4dw_burst(); - sb_spi_config_modes(); -} - static void fch_smbus_init(void) { /* 400 kHz smbus speed. */ @@ -293,7 +223,7 @@ void fch_pre_init(void) if (CONFIG(POST_IO) && (CONFIG_POST_IO_PORT == 0x80) && CONFIG(PICASSO_LPC_IOMUX)) lpc_enable_port80(); - sb_spi_init(); + fch_spi_early_init(); enable_acpimmio_decode_pm04(); fch_smbus_init(); sb_enable_cf9_io(); |