- Add a test to make certain romcc is properly allocating registers.

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@828 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 148 insertions, 0 deletions

diff --git a/util/romcc/tests/simple_test20.c b/util/romcc/tests/simple_test20.c
new file mode 100644
index 0000000000..71af19cf2f
--- /dev/null
+++ b/util/romcc/tests/simple_test20.c
@@ -0,0 +1,148 @@
+static void outb(unsigned char value, unsigned short port)
+{
+        __builtin_outb(value, port);
+}
+
+static void outl(unsigned int value, unsigned short port)
+{
+	__builtin_outl(value, port);
+}
+
+static unsigned char inb(unsigned short port)
+{
+        return __builtin_inb(port);
+}
+
+static unsigned char inl(unsigned short port)
+{
+	return __builtin_inl(port);
+}
+
+static unsigned int config_cmd(unsigned char bus, unsigned devfn, unsigned where)
+{
+	return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3);
+}
+
+static unsigned int pcibios_read_config_dword(
+	unsigned char bus, unsigned devfn, unsigned where)
+{
+	outl(config_cmd(bus, devfn, where), 0xCF8);
+	return inl(0xCFC);
+}
+
+
+
+/* Base Address */
+#ifndef TTYS0_BASE
+#define TTYS0_BASE 0x3f8
+#endif
+
+#ifndef TTYS0_BAUD
+#define TTYS0_BAUD 115200
+#endif
+
+#if ((115200%TTYS0_BAUD) != 0)
+#error Bad ttys0 baud rate
+#endif
+
+#define TTYS0_DIV	(115200/TTYS0_BAUD)
+
+/* Line Control Settings */
+#ifndef TTYS0_LCS
+/* Set 8bit, 1 stop bit, no parity */
+#define TTYS0_LCS	0x3
+#endif
+
+#define UART_LCS	TTYS0_LCS
+
+/* Data */
+#define UART_RBR 0x00
+#define UART_TBR 0x00
+
+/* Control */
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/* Status */
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+
+int uart_can_tx_byte(void)
+{
+	return inb(TTYS0_BASE + UART_LSR) & 0x20;
+}
+
+void uart_wait_to_tx_byte(void)
+{
+	while(!uart_can_tx_byte())
+		;
+}
+
+void uart_wait_until_sent(void)
+{
+	while(!(inb(TTYS0_BASE + UART_LSR) & 0x40)) 
+		;
+}
+
+void uart_tx_byte(unsigned char data)
+{
+	uart_wait_to_tx_byte();
+	outb(data, TTYS0_BASE + UART_TBR);
+	/* Make certain the data clears the fifos */
+	uart_wait_until_sent();
+}
+
+void uart_init(void)
+{
+	/* disable interrupts */
+	outb(0x0, TTYS0_BASE + UART_IER);
+	/* enable fifo's */
+	outb(0x01, TTYS0_BASE + UART_FCR);
+	/* Set Baud Rate Divisor to 12 ==> 115200 Baud */
+	outb(0x80 | UART_LCS, TTYS0_BASE + UART_LCR);
+	outb(TTYS0_DIV & 0xFF,   TTYS0_BASE + UART_DLL);
+	outb((TTYS0_DIV >> 8) & 0xFF,    TTYS0_BASE + UART_DLM);
+	outb(UART_LCS, TTYS0_BASE + UART_LCR);
+}
+
+void __console_tx_char(unsigned char byte)
+{
+	uart_tx_byte(byte);
+}
+void __console_tx_nibble(unsigned nibble)
+{
+	unsigned char digit;
+	digit = nibble + '0';
+	if (digit > '9') {
+		digit += 39;
+	}
+	__console_tx_char(digit);
+}
+
+void __console_tx_hex32(unsigned int value)
+{
+	__console_tx_nibble((value >> 28) & 0x0f);
+	__console_tx_nibble((value >> 24) & 0x0f);
+	__console_tx_nibble((value >> 20) & 0x0f);
+	__console_tx_nibble((value >> 16) & 0x0f);
+	__console_tx_nibble((value >> 12) & 0x0f);
+	__console_tx_nibble((value >>  8) & 0x0f);
+	__console_tx_nibble((value >>  4) & 0x0f);
+	__console_tx_nibble(value & 0x0f);
+}
+
+void print_debug_hex32(unsigned int value) { __console_tx_hex32(value); }
+
+
+void main(void)
+{
+	unsigned long htic;
+	htic = pcibios_read_config_dword(0, 0xc0, 0x6c);
+	print_debug_hex32(htic);
+}