flashrom: Trivial SPI cleanups

While writing a new SPI driver I fixed some things in the SPI code:
All calls to spi_command() had unneccessary #define duplications, and in some
cases the read count define could theoretically become harmful because NULL was
passed for the read buffer. Avoid a crash, should someone change the #defines.

I also noticed that the only caller of spi_page_program() was the it87 driver,
and spi_page_program() could only call back into the it87 driver. Removed the
function for easier-to-follow code and made it8716f_spi_page_program() static.
The ichspi driver's static page functions are already static.

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3418 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 12 insertions, 27 deletions

diff --git a/util/flashrom/spi.c b/util/flashrom/spi.c
index d89bef6ea4..6de9da97ac 100644
--- a/util/flashrom/spi.c
+++ b/util/flashrom/spi.c
@@ -51,7 +51,7 @@ static int spi_rdid(unsigned char *readarr, int bytes)
 {
 	const unsigned char cmd[JEDEC_RDID_OUTSIZE] = {JEDEC_RDID};
 
-	if (spi_command(JEDEC_RDID_OUTSIZE, bytes, cmd, readarr))
+	if (spi_command(sizeof(cmd), bytes, cmd, readarr))
 		return 1;
 	printf_debug("RDID returned %02x %02x %02x.\n", readarr[0], readarr[1], readarr[2]);
 	return 0;
@@ -61,7 +61,7 @@ static int spi_res(unsigned char *readarr)
 {
 	const unsigned char cmd[JEDEC_RES_OUTSIZE] = {JEDEC_RES, 0, 0, 0};
 
-	if (spi_command(JEDEC_RES_OUTSIZE, JEDEC_RES_INSIZE, cmd, readarr))
+	if (spi_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr))
 		return 1;
 	printf_debug("RES returned %02x.\n", readarr[0]);
 	return 0;
@@ -72,7 +72,7 @@ void spi_write_enable()
 	const unsigned char cmd[JEDEC_WREN_OUTSIZE] = {JEDEC_WREN};
 
 	/* Send WREN (Write Enable) */
-	spi_command(JEDEC_WREN_OUTSIZE, JEDEC_WREN_INSIZE, cmd, NULL);
+	spi_command(sizeof(cmd), 0, cmd, NULL);
 }
 
 void spi_write_disable()
@@ -80,7 +80,7 @@ void spi_write_disable()
 	const unsigned char cmd[JEDEC_WRDI_OUTSIZE] = {JEDEC_WRDI};
 
 	/* Send WRDI (Write Disable) */
-	spi_command(JEDEC_WRDI_OUTSIZE, JEDEC_WRDI_INSIZE, cmd, NULL);
+	spi_command(sizeof(cmd), 0, cmd, NULL);
 }
 
 static int probe_spi_rdid_generic(struct flashchip *flash, int bytes)
@@ -182,10 +182,10 @@ int probe_spi_res(struct flashchip *flash)
 uint8_t spi_read_status_register()
 {
 	const unsigned char cmd[JEDEC_RDSR_OUTSIZE] = {JEDEC_RDSR};
-	unsigned char readarr[1];
+	unsigned char readarr[JEDEC_RDSR_INSIZE];
 
 	/* Read Status Register */
-	spi_command(JEDEC_RDSR_OUTSIZE, JEDEC_RDSR_INSIZE, cmd, readarr);
+	spi_command(sizeof(cmd), sizeof(readarr), cmd, readarr);
 	return readarr[0];
 }
 
@@ -273,7 +273,7 @@ int spi_chip_erase_c7(struct flashchip *flash)
 	spi_disable_blockprotect();
 	spi_write_enable();
 	/* Send CE (Chip Erase) */
-	spi_command(JEDEC_CE_C7_OUTSIZE, JEDEC_CE_C7_INSIZE, cmd, NULL);
+	spi_command(sizeof(cmd), 0, cmd, NULL);
 	/* Wait until the Write-In-Progress bit is cleared.
 	 * This usually takes 1-85 s, so wait in 1 s steps.
 	 */
@@ -296,7 +296,7 @@ int spi_block_erase_d8(const struct flashchip *flash, unsigned long addr)
 	cmd[3] = (addr & 0x000000ff);
 	spi_write_enable();
 	/* Send BE (Block Erase) */
-	spi_command(JEDEC_BE_D8_OUTSIZE, JEDEC_BE_D8_INSIZE, cmd, NULL);
+	spi_command(sizeof(cmd), 0, cmd, NULL);
 	/* Wait until the Write-In-Progress bit is cleared.
 	 * This usually takes 100-4000 ms, so wait in 100 ms steps.
 	 */
@@ -315,7 +315,7 @@ int spi_sector_erase(const struct flashchip *flash, unsigned long addr)
 
 	spi_write_enable();
 	/* Send SE (Sector Erase) */
-	spi_command(JEDEC_SE_OUTSIZE, JEDEC_SE_INSIZE, cmd, NULL);
+	spi_command(sizeof(cmd), 0, cmd, NULL);
 	/* Wait until the Write-In-Progress bit is cleared.
 	 * This usually takes 15-800 ms, so wait in 10 ms steps.
 	 */
@@ -324,21 +324,6 @@ int spi_sector_erase(const struct flashchip *flash, unsigned long addr)
 	return 0;
 }
 
-void spi_page_program(int block, uint8_t *buf, uint8_t *bios)
-{
-	switch (flashbus) {
-	case BUS_TYPE_IT87XX_SPI:
-		it8716f_spi_page_program(block, buf, bios);
-		break;
-	case BUS_TYPE_ICH7_SPI:
-	case BUS_TYPE_ICH9_SPI:
-		printf_debug("%s called, but not implemented for ICH\n", __FUNCTION__);
-		break;
-	default:
-		printf_debug("%s called, but no SPI chipset/strapping detected\n", __FUNCTION__);
-	}
-}
-
 /*
  * This is according the SST25VF016 datasheet, who knows it is more
  * generic that this...
@@ -348,7 +333,7 @@ void spi_write_status_register(int status)
 	const unsigned char cmd[JEDEC_WRSR_OUTSIZE] = {JEDEC_WRSR, (unsigned char)status};
 
 	/* Send WRSR (Write Status Register) */
-	spi_command(JEDEC_WRSR_OUTSIZE, JEDEC_WRSR_INSIZE, cmd, NULL);
+	spi_command(sizeof(cmd), 0, cmd, NULL);
 }
 
 void spi_byte_program(int address, uint8_t byte)
@@ -361,7 +346,7 @@ void spi_byte_program(int address, uint8_t byte)
 	};
 
 	/* Send Byte-Program */
-	spi_command(JEDEC_BYTE_PROGRAM_OUTSIZE, JEDEC_BYTE_PROGRAM_INSIZE, cmd, NULL);
+	spi_command(sizeof(cmd), 0, cmd, NULL);
 }
 
 void spi_disable_blockprotect(void)
@@ -386,7 +371,7 @@ void spi_nbyte_read(int address, uint8_t *bytes, int len)
 	};
 
 	/* Send Read */
-	spi_command(JEDEC_READ_OUTSIZE, len, cmd, bytes);
+	spi_command(sizeof(cmd), len, cmd, bytes);
 }
 
 int spi_chip_read(struct flashchip *flash, uint8_t *buf)