cbfs: Add LZ4 in-place decompression support for pre-RAM stages

This patch ports the LZ4 decompression code that debuted in libpayload
last year to coreboot for use in CBFS stages (upgrading the base
algorithm to LZ4's dev branch to access the new in-place decompression
checks). This is especially useful for pre-RAM stages in constrained
SRAM-based systems, which previously could not be compressed due to
the size requirements of the LZMA scratchpad and bounce buffer. The
LZ4 algorithm offers a very lean decompressor function and in-place
decompression support to achieve roughly the same boot speed gains
(trading compression ratio for decompression time) with nearly no
memory overhead.

For now we only activate it for the stages that had previously not been
compressed at all on non-XIP (read: non-x86) boards. In the future we
may also consider replacing LZMA completely for certain boards, since
which algorithm wins out on boot speed depends on board-specific
parameters (architecture, processor speed, SPI transfer rate, etc.).

BRANCH=None
BUG=None
TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on
Oak to be about ~20ms faster (cutting load times for affected stages
almost in half).

Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13638
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

1 files changed, 192 insertions, 0 deletions

diff --git a/util/cbfstool/lz4/lib/xxhash.h b/util/cbfstool/lz4/lib/xxhash.h
new file mode 100644
index 0000000000..c60aa61571
--- /dev/null
+++ b/util/cbfstool/lz4/lib/xxhash.h
@@ -0,0 +1,192 @@
+/*
+   xxHash - Extremely Fast Hash algorithm
+   Header File
+   Copyright (C) 2012-2015, Yann Collet.
+
+   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+       * Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+       * Redistributions in binary form must reproduce the above
+   copyright notice, this list of conditions and the following disclaimer
+   in the documentation and/or other materials provided with the
+   distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+   You can contact the author at :
+   - xxHash source repository : https://github.com/Cyan4973/xxHash
+*/
+
+/* Notice extracted from xxHash homepage :
+
+xxHash is an extremely fast Hash algorithm, running at RAM speed limits.
+It also successfully passes all tests from the SMHasher suite.
+
+Comparison (single thread, Windows Seven 32 bits, using SMHasher on a Core 2 Duo @3GHz)
+
+Name            Speed       Q.Score   Author
+xxHash          5.4 GB/s     10
+CrapWow         3.2 GB/s      2       Andrew
+MumurHash 3a    2.7 GB/s     10       Austin Appleby
+SpookyHash      2.0 GB/s     10       Bob Jenkins
+SBox            1.4 GB/s      9       Bret Mulvey
+Lookup3         1.2 GB/s      9       Bob Jenkins
+SuperFastHash   1.2 GB/s      1       Paul Hsieh
+CityHash64      1.05 GB/s    10       Pike & Alakuijala
+FNV             0.55 GB/s     5       Fowler, Noll, Vo
+CRC32           0.43 GB/s     9
+MD5-32          0.33 GB/s    10       Ronald L. Rivest
+SHA1-32         0.28 GB/s    10
+
+Q.Score is a measure of quality of the hash function.
+It depends on successfully passing SMHasher test set.
+10 is a perfect score.
+
+A 64-bits version, named XXH64, is available since r35.
+It offers much better speed, but for 64-bits applications only.
+Name     Speed on 64 bits    Speed on 32 bits
+XXH64       13.8 GB/s            1.9 GB/s
+XXH32        6.8 GB/s            6.0 GB/s
+*/
+
+#pragma once
+
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+
+/*****************************
+*  Definitions
+*****************************/
+#include <stddef.h>   /* size_t */
+typedef enum { XXH_OK=0, XXH_ERROR } XXH_errorcode;
+
+
+/*****************************
+*  Namespace Emulation
+*****************************/
+/* Motivations :
+
+If you need to include xxHash into your library,
+but wish to avoid xxHash symbols to be present on your library interface
+in an effort to avoid potential name collision if another library also includes xxHash,
+
+you can use XXH_NAMESPACE, which will automatically prefix any symbol from xxHash
+with the value of XXH_NAMESPACE (so avoid to keep it NULL, and avoid numeric values).
+
+Note that no change is required within the calling program :
+it can still call xxHash functions using their regular name.
+They will be automatically translated by this header.
+*/
+#ifdef XXH_NAMESPACE
+#  define XXH_CAT(A,B) A##B
+#  define XXH_NAME2(A,B) XXH_CAT(A,B)
+#  define XXH32 XXH_NAME2(XXH_NAMESPACE, XXH32)
+#  define XXH64 XXH_NAME2(XXH_NAMESPACE, XXH64)
+#  define XXH32_createState XXH_NAME2(XXH_NAMESPACE, XXH32_createState)
+#  define XXH64_createState XXH_NAME2(XXH_NAMESPACE, XXH64_createState)
+#  define XXH32_freeState XXH_NAME2(XXH_NAMESPACE, XXH32_freeState)
+#  define XXH64_freeState XXH_NAME2(XXH_NAMESPACE, XXH64_freeState)
+#  define XXH32_reset XXH_NAME2(XXH_NAMESPACE, XXH32_reset)
+#  define XXH64_reset XXH_NAME2(XXH_NAMESPACE, XXH64_reset)
+#  define XXH32_update XXH_NAME2(XXH_NAMESPACE, XXH32_update)
+#  define XXH64_update XXH_NAME2(XXH_NAMESPACE, XXH64_update)
+#  define XXH32_digest XXH_NAME2(XXH_NAMESPACE, XXH32_digest)
+#  define XXH64_digest XXH_NAME2(XXH_NAMESPACE, XXH64_digest)
+#endif
+
+
+/*****************************
+*  Simple Hash Functions
+*****************************/
+
+unsigned int       XXH32 (const void* input, size_t length, unsigned seed);
+unsigned long long XXH64 (const void* input, size_t length, unsigned long long seed);
+
+/*
+XXH32() :
+    Calculate the 32-bits hash of sequence "length" bytes stored at memory address "input".
+    The memory between input & input+length must be valid (allocated and read-accessible).
+    "seed" can be used to alter the result predictably.
+    This function successfully passes all SMHasher tests.
+    Speed on Core 2 Duo @ 3 GHz (single thread, SMHasher benchmark) : 5.4 GB/s
+XXH64() :
+    Calculate the 64-bits hash of sequence of length "len" stored at memory address "input".
+    Faster on 64-bits systems. Slower on 32-bits systems.
+*/
+
+
+
+/*****************************
+*  Advanced Hash Functions
+*****************************/
+typedef struct { long long ll[ 6]; } XXH32_state_t;
+typedef struct { long long ll[11]; } XXH64_state_t;
+
+/*
+These structures allow static allocation of XXH states.
+States must then be initialized using XXHnn_reset() before first use.
+
+If you prefer dynamic allocation, please refer to functions below.
+*/
+
+XXH32_state_t* XXH32_createState(void);
+XXH_errorcode  XXH32_freeState(XXH32_state_t* statePtr);
+
+XXH64_state_t* XXH64_createState(void);
+XXH_errorcode  XXH64_freeState(XXH64_state_t* statePtr);
+
+/*
+These functions create and release memory for XXH state.
+States must then be initialized using XXHnn_reset() before first use.
+*/
+
+
+XXH_errorcode XXH32_reset  (XXH32_state_t* statePtr, unsigned seed);
+XXH_errorcode XXH32_update (XXH32_state_t* statePtr, const void* input, size_t length);
+unsigned int  XXH32_digest (const XXH32_state_t* statePtr);
+
+XXH_errorcode      XXH64_reset  (XXH64_state_t* statePtr, unsigned long long seed);
+XXH_errorcode      XXH64_update (XXH64_state_t* statePtr, const void* input, size_t length);
+unsigned long long XXH64_digest (const XXH64_state_t* statePtr);
+
+/*
+These functions calculate the xxHash of an input provided in multiple smaller packets,
+as opposed to an input provided as a single block.
+
+XXH state space must first be allocated, using either static or dynamic method provided above.
+
+Start a new hash by initializing state with a seed, using XXHnn_reset().
+
+Then, feed the hash state by calling XXHnn_update() as many times as necessary.
+Obviously, input must be valid, meaning allocated and read accessible.
+The function returns an error code, with 0 meaning OK, and any other value meaning there is an error.
+
+Finally, you can produce a hash anytime, by using XXHnn_digest().
+This function returns the final nn-bits hash.
+You can nonetheless continue feeding the hash state with more input,
+and therefore get some new hashes, by calling again XXHnn_digest().
+
+When you are done, don't forget to free XXH state space, using typically XXHnn_freeState().
+*/
+
+
+#if defined (__cplusplus)
+}
+#endif