summaryrefslogtreecommitdiff
path: root/targets
diff options
context:
space:
mode:
authorYinghai Lu <yinghailu@gmail.com>2004-10-20 05:07:16 +0000
committerYinghai Lu <yinghailu@gmail.com>2004-10-20 05:07:16 +0000
commit6a61d6a4ae26d02844bf8043525d89b0ef9e0351 (patch)
treeffe2c7e2680ccb73502fe4129b9727051792dadb /targets
parentabed01d81d0c55848232a9ebd9bb4c55d036f45d (diff)
Tyan update to work with new CPU Config
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1693 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'targets')
-rw-r--r--targets/tyan/s2850/Config.lb255
-rw-r--r--targets/tyan/s2875/Config.lb253
-rw-r--r--targets/tyan/s2880/Config.lb256
-rw-r--r--targets/tyan/s2880/ns28804
-rw-r--r--targets/tyan/s2881/Config.lb259
-rw-r--r--targets/tyan/s2882/Config.lb280
-rw-r--r--targets/tyan/s2885/Config.lb243
-rw-r--r--targets/tyan/s4880/Config.lb257
-rw-r--r--targets/tyan/s4882/Config.lb257
9 files changed, 177 insertions, 1887 deletions
diff --git a/targets/tyan/s2850/Config.lb b/targets/tyan/s2850/Config.lb
index ecdb36f6d9..45fb62622a 100644
--- a/targets/tyan/s2850/Config.lb
+++ b/targets/tyan/s2850/Config.lb
@@ -2,251 +2,42 @@
# the Tyan s2850
# This will make a target directory of ./s2850
-loadoptions
-
target s2850
+mainboard tyan/s2850
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_SMP
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses k7
-uses k8
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-#uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses CONFIG_CHIP_CONFIGURE
-
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEBUG
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses LINUXBIOS_EXTRA_VERSION
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-
-uses HAVE_HARD_RESET
-
-#uses CONFIG_VGABIOS
-#uses CONFIG_REALMODE_IDT
-#uses CONFIG_PCIBIOS
-#uses VGABIOS_START
-#uses SCSIFW_START
-
-#
-#uses CONFIG_LSI_SCSI_FW_FIXUP
-
-option HAVE_HARD_RESET=1
-
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option k7=1
-option k8=1
-option ROM_SIZE=524288
-
-option CONFIG_CONSOLE_BTEXT=1
-#option CONFIG_VGABIOS=0
-#option CONFIG_REALMODE_IDT=0
-#option CONFIG_PCIBIOS=0
-#option VGABIOS_START=0xfff8c000
-#option SCSIFW_START=0xfff80000
-
-
-option HAVE_FALLBACK_BOOT=1
-
-# use the new chip configure code.
-
-option CONFIG_CHIP_CONFIGURE=1
-#option CONFIG_LSI_SCSI_FW_FIXUP=1
-
-
-#
-###
-### Build code to export a programmable irq routing table
-###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=12
-#
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-option CONFIG_SMP=1
-option CONFIG_MAX_CPUS=1
-option CONFIG_LOGICAL_CPUS=0
-option CONFIG_MAX_PHYSICAL_CPUS=1
-#
-###
-### Build code to setup a generic IOAPIC
-###
-option CONFIG_IOAPIC=1
-#
-###
-### MEMORY_HOLE instructs earlymtrr.inc to
-### enable caching from 0-640KB and to disable
-### caching from 640KB-1MB using fixed MTRRs
-###
-### Enabling this option breaks SMP because secondary
-### CPU identification depends on only variable MTRRs
-### being enabled.
-###
-#option MEMORY_HOLE=0
-#
-###
-### Clean up the motherboard id strings
-###
-option MAINBOARD_PART_NUMBER="S2850"
-option MAINBOARD_VENDOR="Tyan"
-#
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-#option FALLBACK_SIZE=524288
-#option FALLBACK_SIZE=98304
-option FALLBACK_SIZE=131072
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-option ROM_IMAGE_SIZE=65536
-
-
-###
-### Compute where this copy of linuxBIOS will start in the boot rom
-###
-#
-###
-
-## We do use compressed image
-option CONFIG_COMPRESS=1
-
-option CONFIG_CONSOLE_SERIAL8250=1
-option TTYS0_BAUD=115200
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=8
-
-option DEBUG=1
-
-#
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x004000
-
-##
-## Use a 128K stack
-##
-option STACK_SIZE=0x4000
-
-##
-## Use a 256K heap
-##
-option HEAP_SIZE=0x8000
-
-#
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-option CONFIG_ROM_STREAM = 1
-
-#
-#
+# Tyan s2895
romimage "normal"
-# 48K for SCSI FW
+# 48K for SCSI FW
# option ROM_SIZE = 475136
-# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
+# 64K for Etherboot
+# option ROM_SIZE = 458752
option USE_FALLBACK_IMAGE=0
- option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
- option ROM_SECTION_OFFSET= 0
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
- option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2850
-# payload ../../../payloads/eepro100--ide_disk.zelf
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
- payload ../../../payloads/eepro100--filo_btext.zelf
+# payload ../../../payloads/filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
romimage "fallback"
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
option USE_FALLBACK_IMAGE=1
- option ROM_SECTION_SIZE = FALLBACK_SIZE
- option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
- option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2850
-# payload ../../../payloads/eepro100--ide_disk.zelf
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
- payload ../../../payloads/eepro100--filo_btext.zelf
+# payload ../../../payloads/filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2875/Config.lb b/targets/tyan/s2875/Config.lb
index 42a0b99b50..cb4138064e 100644
--- a/targets/tyan/s2875/Config.lb
+++ b/targets/tyan/s2875/Config.lb
@@ -2,251 +2,42 @@
# the Tyan s2875
# This will make a target directory of ./s2875
-loadoptions
-
target s2875
+mainboard tyan/s2875
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_SMP
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses k7
-uses k8
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-#uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses CONFIG_CHIP_CONFIGURE
-
-#uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEBUG
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses LINUXBIOS_EXTRA_VERSION
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses HAVE_HARD_RESET
-
-#uses CONFIG_VGABIOS
-#uses CONFIG_REALMODE_IDT
-#uses CONFIG_PCIBIOS
-#uses VGABIOS_START
-#uses SCSIFW_START
-
-#
-#uses CONFIG_LSI_SCSI_FW_FIXUP
-
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option k7=1
-option k8=1
-option ROM_SIZE=524288
-
-#option CONFIG_CONSOLE_BTEXT=1
-#option CONFIG_VGABIOS=1
-#option CONFIG_REALMODE_IDT=1
-#option CONFIG_PCIBIOS=1
-#option VGABIOS_START=1
-#option SCSIFW_START=0xfff80000
-
-
-option HAVE_FALLBACK_BOOT=1
-
-# use the new chip configure code.
-
-option CONFIG_CHIP_CONFIGURE=1
-#option CONFIG_LSI_SCSI_FW_FIXUP=1
-
-
-option HAVE_HARD_RESET=1
-
-###
-### Build code to export a programmable irq routing table
-###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=13
-#
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-option CONFIG_SMP=1
-option CONFIG_MAX_CPUS=2
-option CONFIG_LOGICAL_CPUS=0
-option CONFIG_MAX_PHYSICAL_CPUS=2
-#
-###
-### Build code to setup a generic IOAPIC
-###
-option CONFIG_IOAPIC=1
-#
-###
-### MEMORY_HOLE instructs earlymtrr.inc to
-### enable caching from 0-640KB and to disable
-### caching from 640KB-1MB using fixed MTRRs
-###
-### Enabling this option breaks SMP because secondary
-### CPU identification depends on only variable MTRRs
-### being enabled.
-###
-#option MEMORY_HOLE=0
-#
-###
-### Clean up the motherboard id strings
-###
-option MAINBOARD_PART_NUMBER="S2875"
-option MAINBOARD_VENDOR="Tyan"
-#
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-#option FALLBACK_SIZE=524288
-#option FALLBACK_SIZE=98304
-option FALLBACK_SIZE=131072
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-option ROM_IMAGE_SIZE=65536
-
-
-###
-### Compute where this copy of linuxBIOS will start in the boot rom
-###
-#
-###
-
-## We do use compressed image
-option CONFIG_COMPRESS=1
-
-option CONFIG_CONSOLE_SERIAL8250=1
-option TTYS0_BAUD=115200
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=8
-
-option DEBUG=1
-
-#
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x004000
-
-##
-## Use a 32K stack
-##
-option STACK_SIZE=0x8000
-
-##
-## Use a 56K heap
-##
-option HEAP_SIZE=0xe000
-
-#
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-option CONFIG_ROM_STREAM = 1
-
-#
-#
+# Tyan s2895
romimage "normal"
-# 48K for SCSI FW
+# 48K for SCSI FW
# option ROM_SIZE = 475136
-# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
- option USE_FALLBACK_IMAGE=0
- option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
- option ROM_SECTION_OFFSET= 0
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2875
-# payload ../../../payloads/e1000--ide_disk.zelf
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
+# 64K for Etherboot
+# option ROM_SIZE = 458752
+ option USE_FALLBACK_IMAGE=0
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
# payload ../../../payloads/filo.zelf
- payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
romimage "fallback"
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
option USE_FALLBACK_IMAGE=1
- option ROM_SECTION_SIZE = FALLBACK_SIZE
- option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2875
-# payload ../../../payloads/e1000--ide_disk.zelf
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
# payload ../../../payloads/filo.zelf
- payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2880/Config.lb b/targets/tyan/s2880/Config.lb
index 33d0a972fc..e0a7d26d81 100644
--- a/targets/tyan/s2880/Config.lb
+++ b/targets/tyan/s2880/Config.lb
@@ -2,256 +2,42 @@
# the Tyan s2880
# This will make a target directory of ./s2880
-loadoptions
-
target s2880
+mainboard tyan/s2880
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_SMP
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses k7
-uses k8
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-#uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses CONFIG_CHIP_CONFIGURE
-
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEBUG
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses LINUXBIOS_EXTRA_VERSION
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-
-uses HAVE_HARD_RESET
-
-#uses CONFIG_VGABIOS
-#uses CONFIG_REALMODE_IDT
-#uses CONFIG_PCIBIOS
-#uses VGABIOS_START
-#uses SCSIFW_START
-
-#
-#uses CONFIG_LSI_SCSI_FW_FIXUP
-
-
-option HAVE_HARD_RESET=1
-
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option k7=1
-option k8=1
-option ROM_SIZE=524288
-
-option CONFIG_CONSOLE_BTEXT=1
-#option CONFIG_VGABIOS=0
-#option CONFIG_REALMODE_IDT=0
-#option CONFIG_PCIBIOS=0
-#option VGABIOS_START=0xfff8c000
-#option SCSIFW_START=0xfff80000
-
-
-option HAVE_FALLBACK_BOOT=1
-
-# use the new chip configure code.
-
-option CONFIG_CHIP_CONFIGURE=1
-#option CONFIG_LSI_SCSI_FW_FIXUP=1
-
-
-#
-###
-### Build code to export a programmable irq routing table
-###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=12
-#
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-option CONFIG_SMP=1
-option CONFIG_MAX_CPUS=2
-option CONFIG_LOGICAL_CPUS=0
-option CONFIG_MAX_PHYSICAL_CPUS=2
-#
-###
-### Build code to setup a generic IOAPIC
-###
-option CONFIG_IOAPIC=1
-#
-###
-### MEMORY_HOLE instructs earlymtrr.inc to
-### enable caching from 0-640KB and to disable
-### caching from 640KB-1MB using fixed MTRRs
-###
-### Enabling this option breaks SMP because secondary
-### CPU identification depends on only variable MTRRs
-### being enabled.
-###
-#option MEMORY_HOLE=0
-#
-###
-### Clean up the motherboard id strings
-###
-option MAINBOARD_PART_NUMBER="S2880"
-option MAINBOARD_VENDOR="Tyan"
-#
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-#option FALLBACK_SIZE=524288
-#option FALLBACK_SIZE=98304
-option FALLBACK_SIZE=131072
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-option ROM_IMAGE_SIZE=65536
-
-
-###
-### Compute where this copy of linuxBIOS will start in the boot rom
-###
-#
-###
-
-## We do use compressed image
-option CONFIG_COMPRESS=1
-
-option CONFIG_CONSOLE_SERIAL8250=1
-option TTYS0_BAUD=115200
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=7
-## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=7
-
-option DEBUG=1
-
-#
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x004000
-
-##
-## Use a 32K stack
-##
-option STACK_SIZE=0x8000
-
-##
-## Use a 56K heap
-##
-option HEAP_SIZE=0xe000
-
-#
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-option CONFIG_ROM_STREAM = 1
-
-#
-#
+# Tyan s2895
romimage "normal"
-# 48K for SCSI FW
+# 48K for SCSI FW
# option ROM_SIZE = 475136
-# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
-# option ROM_SIZE = (512*1024 - 48*1024)
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
+# 64K for Etherboot
+# option ROM_SIZE = 458752
option USE_FALLBACK_IMAGE=0
- option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
- option ROM_SECTION_OFFSET= 0
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
-
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2880
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
- payload ../../../payloads/tg3--filo_btext.zelf
+# payload ../../../payloads/filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
romimage "fallback"
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
option USE_FALLBACK_IMAGE=1
- option ROM_SECTION_SIZE = FALLBACK_SIZE
- option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2880
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
- payload ../../../payloads/tg3--filo_btext.zelf
+# payload ../../../payloads/filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2880/ns2880 b/targets/tyan/s2880/ns2880
index 01e7fc4dc5..9233e7c749 100644
--- a/targets/tyan/s2880/ns2880
+++ b/targets/tyan/s2880/ns2880
@@ -3,6 +3,6 @@ TYANMB=s2880
cd "$TYANMB"
make
#cat ../fwx.rom ../atix.rom ./normal/linuxbios.rom ./fallback/linuxbios.rom > $TYANMB"_linuxbios.rom"
-cat ../fwx.rom ./normal/linuxbios.rom ./fallback/linuxbios.rom > $TYANMB"_linuxbios.rom"
-#cat ./normal/linuxbios.rom ./fallback/linuxbios.rom > $TYANMB"_linuxbios.rom"
+#cat ../fwx.rom ./normal/linuxbios.rom ./fallback/linuxbios.rom > $TYANMB"_linuxbios.rom"
+cat ./normal/linuxbios.rom ./fallback/linuxbios.rom > $TYANMB"_linuxbios.rom"
cp -f $TYANMB"_linuxbios.rom" /home/yhlu/
diff --git a/targets/tyan/s2881/Config.lb b/targets/tyan/s2881/Config.lb
index cd0b3f0e68..0947dadb78 100644
--- a/targets/tyan/s2881/Config.lb
+++ b/targets/tyan/s2881/Config.lb
@@ -1,256 +1,43 @@
# Sample config file for
-# the Tyan s2880
-# This will make a target directory of ./s2880
-
-loadoptions
+# the Tyan s2881
+# This will make a target directory of ./s2881
target s2881
+mainboard tyan/s2881
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_SMP
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses k7
-uses k8
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-#uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses CONFIG_CHIP_CONFIGURE
-
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEBUG
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses LINUXBIOS_EXTRA_VERSION
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-
-uses HAVE_HARD_RESET
-
-#uses CONFIG_VGABIOS
-#uses CONFIG_REALMODE_IDT
-#uses CONFIG_PCIBIOS
-#uses VGABIOS_START
-#uses SCSIFW_START
-
-#
-#uses CONFIG_LSI_SCSI_FW_FIXUP
-
-option HAVE_HARD_RESET=1
-
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option k7=1
-option k8=1
-option ROM_SIZE=524288
-
-option CONFIG_CONSOLE_BTEXT=1
-#option CONFIG_VGABIOS=0
-#option CONFIG_REALMODE_IDT=0
-#option CONFIG_PCIBIOS=0
-#option VGABIOS_START=0xfff8c000
-#option SCSIFW_START=0xfff80000
-
-
-option HAVE_FALLBACK_BOOT=1
-
-# use the new chip configure code.
-
-option CONFIG_CHIP_CONFIGURE=1
-#option CONFIG_LSI_SCSI_FW_FIXUP=1
-
-
-#
-###
-### Build code to export a programmable irq routing table
-###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=9
-#
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-option CONFIG_SMP=1
-option CONFIG_MAX_CPUS=2
-option CONFIG_LOGICAL_CPUS=0
-option CONFIG_MAX_PHYSICAL_CPUS=2
-#
-###
-### Build code to setup a generic IOAPIC
-###
-option CONFIG_IOAPIC=1
-#
-###
-### MEMORY_HOLE instructs earlymtrr.inc to
-### enable caching from 0-640KB and to disable
-### caching from 640KB-1MB using fixed MTRRs
-###
-### Enabling this option breaks SMP because secondary
-### CPU identification depends on only variable MTRRs
-### being enabled.
-###
-#option MEMORY_HOLE=0
-#
-###
-### Clean up the motherboard id strings
-###
-option MAINBOARD_PART_NUMBER="S2881"
-option MAINBOARD_VENDOR="Tyan"
-#
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-#option FALLBACK_SIZE=524288
-#option FALLBACK_SIZE=98304
-option FALLBACK_SIZE=131072
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-option ROM_IMAGE_SIZE=65536
-
-
-###
-### Compute where this copy of linuxBIOS will start in the boot rom
-###
-#
-###
-
-## We do use compressed image
-option CONFIG_COMPRESS=1
-
-option CONFIG_CONSOLE_SERIAL8250=1
-option TTYS0_BAUD=115200
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=7
-## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=7
-
-option DEBUG=1
-
-#
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x004000
-
-##
-## Use a 32K stack
-##
-option STACK_SIZE=0x8000
-
-##
-## Use a 56K heap
-##
-option HEAP_SIZE=0xe000
-
-#
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-option CONFIG_ROM_STREAM = 1
-
-#
-#
+# Tyan s2881
romimage "normal"
-# 48K for SCSI FW
+# 48K for SCSI FW
# option ROM_SIZE = 475136
-# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
-# 64K for Etherboot
-# option ROM_SIZE = 458752
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
+# 64K for Etherboot
+# option ROM_SIZE = 458752
option USE_FALLBACK_IMAGE=0
- option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
- option ROM_SECTION_OFFSET= 0
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2881
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
- payload ../../../payloads/tg3--filo_btext.zelf
+# payload ../../../payloads/filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
romimage "fallback"
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
option USE_FALLBACK_IMAGE=1
- option ROM_SECTION_SIZE = FALLBACK_SIZE
- option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2881
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
- payload ../../../payloads/tg3--filo_btext.zelf
+# payload ../../../payloads/filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2882/Config.lb b/targets/tyan/s2882/Config.lb
index c05e08d608..d5b799aebc 100644
--- a/targets/tyan/s2882/Config.lb
+++ b/targets/tyan/s2882/Config.lb
@@ -1,271 +1,43 @@
# Sample config file for
-# the Tyan s2880
-# This will make a target directory of ./s2880
-
-loadoptions
+# the Tyan s2882
+# This will make a target directory of ./s2882
target s2882
+mainboard tyan/s2882
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_SMP
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses k7
-uses k8
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-#uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses CONFIG_CHIP_CONFIGURE
-
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-#SMDC Support
-#uses CONFIG_CONSOLE_SERIAL8250_2
-#uses TTYS1_BAUD
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEBUG
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses LINUXBIOS_EXTRA_VERSION
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-
-uses CONFIG_FS_STREAM
-uses CONFIG_IDE
-
-uses HAVE_HARD_RESET
-
-#uses CONFIG_VGABIOS
-#uses CONFIG_REALMODE_IDT
-#uses CONFIG_PCIBIOS
-#uses VGABIOS_START
-#uses SCSIFW_START
-
-#
-#uses CONFIG_LSI_SCSI_FW_FIXUP
-
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option k7=1
-option k8=1
-option ROM_SIZE=524288
-
-option HAVE_HARD_RESET=1
-
-option CONFIG_CONSOLE_BTEXT=1
-#option CONFIG_VGABIOS=1
-#option CONFIG_REALMODE_IDT=1
-#option CONFIG_PCIBIOS=1
-#option VGABIOS_START=0xfff8c000
-#option SCSIFW_START=0xfff80000
-
-#option CONFIG_FS_STREAM=1
-#option CONFIG_IDE=1
-
-option HAVE_FALLBACK_BOOT=1
-
-# use the new chip configure code.
-
-option CONFIG_CHIP_CONFIGURE=1
-#option CONFIG_LSI_SCSI_FW_FIXUP=1
-
-
-#
-###
-### Build code to export a programmable irq routing table
-###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=15
-#
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-option CONFIG_SMP=1
-option CONFIG_MAX_CPUS=2
-option CONFIG_LOGICAL_CPUS=0
-option CONFIG_MAX_PHYSICAL_CPUS=2
-#
-###
-### Build code to setup a generic IOAPIC
-###
-option CONFIG_IOAPIC=1
-#
-###
-### MEMORY_HOLE instructs earlymtrr.inc to
-### enable caching from 0-640KB and to disable
-### caching from 640KB-1MB using fixed MTRRs
-###
-### Enabling this option breaks SMP because secondary
-### CPU identification depends on only variable MTRRs
-### being enabled.
-###
-#option MEMORY_HOLE=0
-#
-###
-### Clean up the motherboard id strings
-###
-option MAINBOARD_PART_NUMBER="S2882"
-option MAINBOARD_VENDOR="Tyan"
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-#option FALLBACK_SIZE=524288
-#option FALLBACK_SIZE=98304
-option FALLBACK_SIZE=131072
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-option ROM_IMAGE_SIZE=65536
-
-
-###
-### Compute where this copy of linuxBIOS will start in the boot rom
-###
-#
-###
-
-## We do use compressed image
-option CONFIG_COMPRESS=1
-
-option CONFIG_CONSOLE_SERIAL8250=1
-option TTYS0_BAUD=115200
-
-#SMDC support
-#option CONFIG_CONSOLE_SERIAL8250_2=1
-#option TTYS1_BAUD=19200
-
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=7
-## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=7
-
-option DEBUG=1
-
-#
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x004000
-
-##
-## Use a 32K stack
-##
-option STACK_SIZE=0x8000
-
-##
-## Use a 56K heap
-##
-option HEAP_SIZE=0xe000
-
-#
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-option CONFIG_ROM_STREAM = 1
-
-#
-#
+# Tyan s2882
romimage "normal"
-# 48K for SCSI FW
+# 48K for SCSI FW
# option ROM_SIZE = 475136
-# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
# 64K for Etherboot
-# option ROM_SIZE = 458752
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
- option USE_FALLBACK_IMAGE=0
- option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
- option ROM_SECTION_OFFSET= 0
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2882
-# payload ../../../payloads/tg3--ide_disk.zelf
+# option ROM_SIZE = 458752
+ option USE_FALLBACK_IMAGE=0
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
- payload ../../../payloads/tg3--filo_btext.zelf
-# SMDC support
-# payload ../../tg3--ide_disk_com1_2.zelf
+# payload ../../../payloads/filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
romimage "fallback"
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
option USE_FALLBACK_IMAGE=1
- option ROM_SECTION_SIZE = FALLBACK_SIZE
- option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2882
-# payload ../../../payloads/tg3--ide_disk.zelf
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+# payload ../../../payloads/tg3--ide_disk.zelf
+# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
- payload ../../../payloads/tg3_btext.zelf
-
-#SMDC support
-# payload ../../tg3--ide_disk_com1_2.zelf
+# payload ../../../payloads/filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2885/Config.lb b/targets/tyan/s2885/Config.lb
index 19b7016f74..73e73823e3 100644
--- a/targets/tyan/s2885/Config.lb
+++ b/targets/tyan/s2885/Config.lb
@@ -2,249 +2,42 @@
# the Tyan s2885
# This will make a target directory of ./s2885
-loadoptions
-
target s2885
+mainboard tyan/s2885
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_SMP
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses k7
-uses k8
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-#uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses CONFIG_CHIP_CONFIGURE
-
-uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEBUG
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses LINUXBIOS_EXTRA_VERSION
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses HAVE_HARD_RESET
-
-#uses CONFIG_VGABIOS
-#uses CONFIG_REALMODE_IDT
-#uses CONFIG_PCIBIOS
-#uses VGABIOS_START
-#uses SCSIFW_START
-
-#
-#uses CONFIG_LSI_SCSI_FW_FIXUP
-
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option k7=1
-option k8=1
-option ROM_SIZE=524288
-
-#option CONFIG_VGABIOS=1
-#option CONFIG_REALMODE_IDT=1
-#option CONFIG_PCIBIOS=1
-#option VGABIOS_START=1
-#option SCSIFW_START=0xfff80000
-
-
-option HAVE_FALLBACK_BOOT=1
-
-# use the new chip configure code.
-
-option CONFIG_CHIP_CONFIGURE=1
-#option CONFIG_LSI_SCSI_FW_FIXUP=1
-
-
-option HAVE_HARD_RESET=1
-
-###
-### Build code to export a programmable irq routing table
-###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=11
-#
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-option CONFIG_SMP=1
-option CONFIG_MAX_CPUS=2
-option CONFIG_LOGICAL_CPUS=0
-option CONFIG_MAX_PHYSICAL_CPUS=2
-#
-###
-### Build code to setup a generic IOAPIC
-###
-option CONFIG_IOAPIC=1
-#
-###
-### MEMORY_HOLE instructs earlymtrr.inc to
-### enable caching from 0-640KB and to disable
-### caching from 640KB-1MB using fixed MTRRs
-###
-### Enabling this option breaks SMP because secondary
-### CPU identification depends on only variable MTRRs
-### being enabled.
-###
-#option MEMORY_HOLE=0
-#
-###
-### Clean up the motherboard id strings
-###
-option MAINBOARD_PART_NUMBER="S2885"
-option MAINBOARD_VENDOR="Tyan"
-#
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-#option FALLBACK_SIZE=524288
-#option FALLBACK_SIZE=98304
-option FALLBACK_SIZE=131072
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-option ROM_IMAGE_SIZE=65536
-
-
-###
-### Compute where this copy of linuxBIOS will start in the boot rom
-###
-#
-###
-
-## We do use compressed image
-option CONFIG_COMPRESS=1
-
-option CONFIG_CONSOLE_SERIAL8250=1
-option TTYS0_BAUD=115200
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=8
-
-option DEBUG=1
-
-#
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x004000
-
-##
-## Use a 32K stack
-##
-option STACK_SIZE=0x8000
-
-##
-## Use a 56K heap
-##
-option HEAP_SIZE=0xe000
-
-#
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-option CONFIG_ROM_STREAM = 1
-
-#
-#
+# Tyan s2895
romimage "normal"
-# 48K for SCSI FW
+# 48K for SCSI FW
# option ROM_SIZE = 475136
-# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
# 64K for Etherboot
# option ROM_SIZE = 458752
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
- option USE_FALLBACK_IMAGE=0
- option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
- option ROM_SECTION_OFFSET= 0
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2885
+ option USE_FALLBACK_IMAGE=0
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
# payload ../../../payloads/filo.zelf
- payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
romimage "fallback"
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
option USE_FALLBACK_IMAGE=1
- option ROM_SECTION_SIZE = FALLBACK_SIZE
- option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2885
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
# payload ../../../payloads/filo.zelf
- payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s4880/Config.lb b/targets/tyan/s4880/Config.lb
index efd636d748..9e0108c4ac 100644
--- a/targets/tyan/s4880/Config.lb
+++ b/targets/tyan/s4880/Config.lb
@@ -1,258 +1,43 @@
# Sample config file for
-# the Tyan s2880
-# This will make a target directory of ./s2880
-
-loadoptions
+# the Tyan s4880
+# This will make a target directory of ./s4880
target s4880
+mainboard tyan/s4880
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_SMP
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses k7
-uses k8
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-#uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses CONFIG_CHIP_CONFIGURE
-
-#uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEBUG
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses LINUXBIOS_EXTRA_VERSION
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-
-uses HAVE_HARD_RESET
-
-#uses CONFIG_VGABIOS
-#uses CONFIG_REALMODE_IDT
-#uses CONFIG_PCIBIOS
-#uses VGABIOS_START
-#uses SCSIFW_START
-
-#
-#uses CONFIG_LSI_SCSI_FW_FIXUP
-
-option HAVE_HARD_RESET=1
-
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option k7=1
-option k8=1
-option ROM_SIZE=524288
-
-#option CONFIG_CONSOLE_BTEXT=1
-#option CONFIG_VGABIOS=0
-#option CONFIG_REALMODE_IDT=0
-#option CONFIG_PCIBIOS=0
-#option VGABIOS_START=0xfff8c000
-#option SCSIFW_START=0xfff80000
-
-
-option HAVE_FALLBACK_BOOT=1
-
-# use the new chip configure code.
-
-option CONFIG_CHIP_CONFIGURE=1
-#option CONFIG_LSI_SCSI_FW_FIXUP=1
-
-
-#
-###
-### Build code to export a programmable irq routing table
-###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=22
-#
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-option CONFIG_SMP=1
-option CONFIG_MAX_CPUS=4
-option CONFIG_LOGICAL_CPUS=0
-option CONFIG_MAX_PHYSICAL_CPUS=4
-#
-###
-### Build code to setup a generic IOAPIC
-###
-option CONFIG_IOAPIC=1
-#
-###
-### MEMORY_HOLE instructs earlymtrr.inc to
-### enable caching from 0-640KB and to disable
-### caching from 640KB-1MB using fixed MTRRs
-###
-### Enabling this option breaks SMP because secondary
-### CPU identification depends on only variable MTRRs
-### being enabled.
-###
-#option MEMORY_HOLE=0
-#
-###
-### Clean up the motherboard id strings
-###
-option MAINBOARD_PART_NUMBER="S4880"
-option MAINBOARD_VENDOR="Tyan"
-#
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-#option FALLBACK_SIZE=524288
-#option FALLBACK_SIZE=98304
-option FALLBACK_SIZE=131072
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-option ROM_IMAGE_SIZE=65536
-
-
-###
-### Compute where this copy of linuxBIOS will start in the boot rom
-###
-#
-###
-
-## We do use compressed image
-option CONFIG_COMPRESS=1
-
-option CONFIG_CONSOLE_SERIAL8250=1
-option TTYS0_BAUD=115200
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=7
-## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=7
-
-option DEBUG=1
-
-#
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x004000
-
-##
-## Use a 32K stack
-##
-option STACK_SIZE=0x8000
-
-##
-## Use a 56K heap
-##
-option HEAP_SIZE=0xe000
-
-#
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-option CONFIG_ROM_STREAM = 1
-
-#
-#
+# Tyan s4880
romimage "normal"
-# 48K for SCSI FW
+# 48K for SCSI FW
# option ROM_SIZE = 475136
-# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
+# 64K for Etherboot
+# option ROM_SIZE = 458752
option USE_FALLBACK_IMAGE=0
- option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
- option ROM_SECTION_OFFSET= 0
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s4880
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
-# payload ../../../payloads/tg3--filo_btext.zelf
# payload ../../../payloads/filo.zelf
- payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
romimage "fallback"
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
option USE_FALLBACK_IMAGE=1
- option ROM_SECTION_SIZE = FALLBACK_SIZE
- option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s4880
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
-# payload ../../../payloads/tg3--filo_btext.zelf
# payload ../../../payloads/filo.zelf
- payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s4882/Config.lb b/targets/tyan/s4882/Config.lb
index 025193dc5b..45f6fde767 100644
--- a/targets/tyan/s4882/Config.lb
+++ b/targets/tyan/s4882/Config.lb
@@ -1,258 +1,43 @@
# Sample config file for
-# the Tyan s2880
-# This will make a target directory of ./s2880
-
-loadoptions
+# the Tyan s4882
+# This will make a target directory of ./s4882
target s4882
+mainboard tyan/s4882
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_SMP
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses k7
-uses k8
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-#uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses CONFIG_CHIP_CONFIGURE
-
-#uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEBUG
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses LINUXBIOS_EXTRA_VERSION
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-
-uses HAVE_HARD_RESET
-
-#uses CONFIG_VGABIOS
-#uses CONFIG_REALMODE_IDT
-#uses CONFIG_PCIBIOS
-#uses VGABIOS_START
-#uses SCSIFW_START
-
-#
-#uses CONFIG_LSI_SCSI_FW_FIXUP
-
-option HAVE_HARD_RESET=1
-
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option k7=1
-option k8=1
-option ROM_SIZE=524288
-
-#option CONFIG_CONSOLE_BTEXT=1
-#option CONFIG_VGABIOS=0
-#option CONFIG_REALMODE_IDT=0
-#option CONFIG_PCIBIOS=0
-#option VGABIOS_START=0xfff8c000
-#option SCSIFW_START=0xfff80000
-
-
-option HAVE_FALLBACK_BOOT=1
-
-# use the new chip configure code.
-
-option CONFIG_CHIP_CONFIGURE=1
-#option CONFIG_LSI_SCSI_FW_FIXUP=1
-
-
-#
-###
-### Build code to export a programmable irq routing table
-###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=22
-#
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-option CONFIG_SMP=1
-option CONFIG_MAX_CPUS=4
-option CONFIG_LOGICAL_CPUS=0
-option CONFIG_MAX_PHYSICAL_CPUS=4
-#
-###
-### Build code to setup a generic IOAPIC
-###
-option CONFIG_IOAPIC=1
-#
-###
-### MEMORY_HOLE instructs earlymtrr.inc to
-### enable caching from 0-640KB and to disable
-### caching from 640KB-1MB using fixed MTRRs
-###
-### Enabling this option breaks SMP because secondary
-### CPU identification depends on only variable MTRRs
-### being enabled.
-###
-#option MEMORY_HOLE=0
-#
-###
-### Clean up the motherboard id strings
-###
-option MAINBOARD_PART_NUMBER="S4882"
-option MAINBOARD_VENDOR="Tyan"
-#
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-#option FALLBACK_SIZE=524288
-#option FALLBACK_SIZE=98304
-option FALLBACK_SIZE=131072
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-option ROM_IMAGE_SIZE=65536
-
-
-###
-### Compute where this copy of linuxBIOS will start in the boot rom
-###
-#
-###
-
-## We do use compressed image
-option CONFIG_COMPRESS=1
-
-option CONFIG_CONSOLE_SERIAL8250=1
-option TTYS0_BAUD=115200
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=7
-## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=7
-
-option DEBUG=1
-
-#
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x004000
-
-##
-## Use a 32K stack
-##
-option STACK_SIZE=0x8000
-
-##
-## Use a 56K heap
-##
-option HEAP_SIZE=0xe000
-
-#
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-option CONFIG_ROM_STREAM = 1
-
-#
-#
+# Tyan s4882
romimage "normal"
-# 48K for SCSI FW
+# 48K for SCSI FW
# option ROM_SIZE = 475136
-# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
+# 64K for Etherboot
+# option ROM_SIZE = 458752
option USE_FALLBACK_IMAGE=0
- option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
- option ROM_SECTION_OFFSET= 0
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s4882
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
-# payload ../../../payloads/tg3--filo_btext.zelf
# payload ../../../payloads/filo.zelf
- payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
romimage "fallback"
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
option USE_FALLBACK_IMAGE=1
- option ROM_SECTION_SIZE = FALLBACK_SIZE
- option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s4882
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
-# payload ../../../payloads/tg3--filo_btext.zelf
# payload ../../../payloads/filo.zelf
- payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"