epia-m support

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1655 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 237 insertions, 13 deletions

diff --git a/targets/via/epia-m/Config.etherboot.lb b/targets/via/epia-m/Config.etherboot.lb
new file mode 100644
index 0000000000..b19858da98
--- /dev/null
+++ b/targets/via/epia-m/Config.etherboot.lb
@@ -0,0 +1,107 @@
+# Sample config file for EPIA-M
+# This will make a target directory of ./epia-m
+
+loadoptions
+
+target epia-m
+
+uses ARCH
+uses CONFIG_COMPRESS
+uses CONFIG_IOAPIC
+uses CONFIG_ROM_STREAM
+uses CONFIG_ROM_STREAM_START
+uses CONFIG_UDELAY_TSC
+uses CPU_FIXUP
+uses FALLBACK_SIZE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses HAVE_HARD_RESET
+uses i586
+uses i686
+uses INTEL_PPRO_MTRR
+uses HEAP_SIZE
+uses IRQ_SLOT_COUNT
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses CONFIG_SMP
+uses CONFIG_MAX_CPUS
+uses MEMORY_HOLE
+uses PAYLOAD_SIZE
+uses _RAMBASE
+uses _ROMBASE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_OFFSET
+uses ROM_SECTION_SIZE
+uses ROM_SIZE
+uses STACK_SIZE
+uses USE_FALLBACK_IMAGE
+uses USE_OPTION_TABLE
+uses HAVE_OPTION_TABLE
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses  DEFAULT_CONSOLE_LOGLEVEL
+uses  CONFIG_CONSOLE_SERIAL8250
+uses MAINBOARD
+uses CONFIG_CHIP_CONFIGURE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses LINUXBIOS_EXTRA_VERSION
+uses TTYS0_BAUD
+
+option TTYS0_BAUD=19200
+
+option CONFIG_CHIP_CONFIGURE=1
+
+option  MAXIMUM_CONSOLE_LOGLEVEL=7
+option  DEFAULT_CONSOLE_LOGLEVEL=7
+option  CONFIG_CONSOLE_SERIAL8250=1
+
+option CPU_FIXUP=1
+option CONFIG_UDELAY_TSC=0
+option i686=1
+option i586=1
+option INTEL_PPRO_MTRR=1
+option ROM_SIZE=256*1024
+
+option HAVE_OPTION_TABLE=1
+option CONFIG_ROM_STREAM=1
+option HAVE_FALLBACK_BOOT=1
+
+###
+### Compute the location and size of where this firmware image
+### (linuxBIOS plus bootloader) will live in the boot rom chip.
+###
+option FALLBACK_SIZE=131072
+
+## LinuxBIOS C code runs at this location in RAM
+option _RAMBASE=0x00004000
+
+#
+###
+### Compute the start location and size size of
+### The linuxBIOS bootloader.
+###
+
+#
+# Arima hdama
+romimage "normal"
+	option USE_FALLBACK_IMAGE=0
+	option ROM_IMAGE_SIZE=0x10000
+	option LINUXBIOS_EXTRA_VERSION=".0Normal"
+	mainboard via/epia-m
+#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+#	payload ../../../../tg3--ide_disk.zelf	
+	payload ../../../../../lnxieepro100.ebi
+end
+
+romimage "fallback" 
+	option USE_FALLBACK_IMAGE=1
+	option ROM_IMAGE_SIZE=0x10000
+	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
+	mainboard via/epia-m
+#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+#	payload ../../../../tg3--ide_disk.zelf	
+	payload ../../../../../lnxieepro100.ebi
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/via/epia-m/Config.lb b/targets/via/epia-m/Config.lb
index b19858da98..ca87c7ba47 100644
--- a/targets/via/epia-m/Config.lb
+++ b/targets/via/epia-m/Config.lb
@@ -46,32 +46,33 @@ uses CONFIG_CHIP_CONFIGURE
 uses XIP_ROM_SIZE
 uses XIP_ROM_BASE
 uses LINUXBIOS_EXTRA_VERSION
-uses TTYS0_BAUD
-
-option TTYS0_BAUD=19200
-
+uses HAVE_ACPI_TABLES
+uses CONFIG_LEGACY_VGABIOS
+uses VGABIOS_START
+uses VGABIOS_START
 option CONFIG_CHIP_CONFIGURE=1
 
-option  MAXIMUM_CONSOLE_LOGLEVEL=7
-option  DEFAULT_CONSOLE_LOGLEVEL=7
+option  MAXIMUM_CONSOLE_LOGLEVEL=8
+option  DEFAULT_CONSOLE_LOGLEVEL=8
 option  CONFIG_CONSOLE_SERIAL8250=1
-
+option HAVE_ACPI_TABLES=1
 option CPU_FIXUP=1
 option CONFIG_UDELAY_TSC=0
 option i686=1
 option i586=1
 option INTEL_PPRO_MTRR=1
 option ROM_SIZE=256*1024
-
+option CONFIG_LEGACY_VGABIOS=1
 option HAVE_OPTION_TABLE=1
 option CONFIG_ROM_STREAM=1
 option HAVE_FALLBACK_BOOT=1
 
+option VGABIOS_START=0xfffc0000
 ###
 ### Compute the location and size of where this firmware image
 ### (linuxBIOS plus bootloader) will live in the boot rom chip.
 ###
-option FALLBACK_SIZE=131072
+option FALLBACK_SIZE=0x18000
 
 ## LinuxBIOS C code runs at this location in RAM
 option _RAMBASE=0x00004000
@@ -86,22 +87,26 @@ option _RAMBASE=0x00004000
 # Arima hdama
 romimage "normal"
 	option USE_FALLBACK_IMAGE=0
-	option ROM_IMAGE_SIZE=0x10000
+	option ROM_IMAGE_SIZE=0xc000
+	option ROM_SECTION_OFFSET=0x10000
+	option ROM_SECTION_SIZE=0x18000
 	option LINUXBIOS_EXTRA_VERSION=".0Normal"
 	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
-	payload ../../../../../lnxieepro100.ebi
+#	payload ../../../../../lnxieepro100.ebi
+	payload /filo.elf
 end
 
 romimage "fallback" 
 	option USE_FALLBACK_IMAGE=1
-	option ROM_IMAGE_SIZE=0x10000
+	option ROM_IMAGE_SIZE=0xc000
 	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
 	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
-	payload ../../../../../lnxieepro100.ebi
+#	payload ../../../../../lnxieepro100.ebi
+	payload /filo.elf
 end
 
 buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/via/epia-m/Config.vga.filo b/targets/via/epia-m/Config.vga.filo
new file mode 100644
index 0000000000..ca87c7ba47
--- /dev/null
+++ b/targets/via/epia-m/Config.vga.filo
@@ -0,0 +1,112 @@
+# Sample config file for EPIA-M
+# This will make a target directory of ./epia-m
+
+loadoptions
+
+target epia-m
+
+uses ARCH
+uses CONFIG_COMPRESS
+uses CONFIG_IOAPIC
+uses CONFIG_ROM_STREAM
+uses CONFIG_ROM_STREAM_START
+uses CONFIG_UDELAY_TSC
+uses CPU_FIXUP
+uses FALLBACK_SIZE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses HAVE_HARD_RESET
+uses i586
+uses i686
+uses INTEL_PPRO_MTRR
+uses HEAP_SIZE
+uses IRQ_SLOT_COUNT
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses CONFIG_SMP
+uses CONFIG_MAX_CPUS
+uses MEMORY_HOLE
+uses PAYLOAD_SIZE
+uses _RAMBASE
+uses _ROMBASE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_OFFSET
+uses ROM_SECTION_SIZE
+uses ROM_SIZE
+uses STACK_SIZE
+uses USE_FALLBACK_IMAGE
+uses USE_OPTION_TABLE
+uses HAVE_OPTION_TABLE
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses  DEFAULT_CONSOLE_LOGLEVEL
+uses  CONFIG_CONSOLE_SERIAL8250
+uses MAINBOARD
+uses CONFIG_CHIP_CONFIGURE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses LINUXBIOS_EXTRA_VERSION
+uses HAVE_ACPI_TABLES
+uses CONFIG_LEGACY_VGABIOS
+uses VGABIOS_START
+uses VGABIOS_START
+option CONFIG_CHIP_CONFIGURE=1
+
+option  MAXIMUM_CONSOLE_LOGLEVEL=8
+option  DEFAULT_CONSOLE_LOGLEVEL=8
+option  CONFIG_CONSOLE_SERIAL8250=1
+option HAVE_ACPI_TABLES=1
+option CPU_FIXUP=1
+option CONFIG_UDELAY_TSC=0
+option i686=1
+option i586=1
+option INTEL_PPRO_MTRR=1
+option ROM_SIZE=256*1024
+option CONFIG_LEGACY_VGABIOS=1
+option HAVE_OPTION_TABLE=1
+option CONFIG_ROM_STREAM=1
+option HAVE_FALLBACK_BOOT=1
+
+option VGABIOS_START=0xfffc0000
+###
+### Compute the location and size of where this firmware image
+### (linuxBIOS plus bootloader) will live in the boot rom chip.
+###
+option FALLBACK_SIZE=0x18000
+
+## LinuxBIOS C code runs at this location in RAM
+option _RAMBASE=0x00004000
+
+#
+###
+### Compute the start location and size size of
+### The linuxBIOS bootloader.
+###
+
+#
+# Arima hdama
+romimage "normal"
+	option USE_FALLBACK_IMAGE=0
+	option ROM_IMAGE_SIZE=0xc000
+	option ROM_SECTION_OFFSET=0x10000
+	option ROM_SECTION_SIZE=0x18000
+	option LINUXBIOS_EXTRA_VERSION=".0Normal"
+	mainboard via/epia-m
+#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+#	payload ../../../../tg3--ide_disk.zelf	
+#	payload ../../../../../lnxieepro100.ebi
+	payload /filo.elf
+end
+
+romimage "fallback" 
+	option USE_FALLBACK_IMAGE=1
+	option ROM_IMAGE_SIZE=0xc000
+	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
+	mainboard via/epia-m
+#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+#	payload ../../../../tg3--ide_disk.zelf	
+#	payload ../../../../../lnxieepro100.ebi
+	payload /filo.elf
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"