This patch unifies the use of config options in v2 to all start with CONFIG_

It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 45 insertions, 45 deletions

diff --git a/targets/iwill/dk8x/Config.lb b/targets/iwill/dk8x/Config.lb
index bcb18b8998..ab4ff09c60 100644
--- a/targets/iwill/dk8x/Config.lb
+++ b/targets/iwill/dk8x/Config.lb
@@ -6,13 +6,13 @@ target dk8x
 
 mainboard iwill/dk8x
 
-option HAVE_HARD_RESET=1
+option CONFIG_HAVE_HARD_RESET=1
 
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
-option ROM_SIZE=1024*1024
+option CONFIG_HAVE_OPTION_TABLE=1
+option CONFIG_HAVE_MP_TABLE=1
+option CONFIG_ROM_SIZE=1024*1024
 
-option HAVE_FALLBACK_BOOT=1
+option CONFIG_HAVE_FALLBACK_BOOT=1
   
 #option CONFIG_LSI_SCSI_FW_FIXUP=1
 
@@ -21,8 +21,8 @@ option HAVE_FALLBACK_BOOT=1
 ###
 ### Build code to export a programmable irq routing table
 ###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=12
+option CONFIG_HAVE_PIRQ_TABLE=1
+option CONFIG_IRQ_SLOT_COUNT=12
 #
 ###
 ### Build code for SMP support
@@ -39,7 +39,7 @@ option CONFIG_MAX_PHYSICAL_CPUS=2
 option CONFIG_IOAPIC=1
 #
 ###
-### MEMORY_HOLE instructs earlymtrr.inc to
+### CONFIG_MEMORY_HOLE instructs earlymtrr.inc to
 ### enable caching from 0-640KB and to disable 
 ### caching from 640KB-1MB using fixed MTRRs 
 ###
@@ -47,24 +47,24 @@ option CONFIG_IOAPIC=1
 ### CPU identification depends on only variable MTRRs
 ### being enabled.
 ###
-#option MEMORY_HOLE=0
+#option CONFIG_MEMORY_HOLE=0
 #
 ###
 ### Clean up the motherboard id strings
 ###
-option MAINBOARD_PART_NUMBER="DK8X"
-option MAINBOARD_VENDOR="IWILL"
+option CONFIG_MAINBOARD_PART_NUMBER="DK8X"
+option CONFIG_MAINBOARD_VENDOR="IWILL"
 #
 ###
 ### Compute the location and size of where this firmware image
 ### (coreboot plus bootloader) will live in the boot rom chip.
 ###
-#option FALLBACK_SIZE=524288
-#option FALLBACK_SIZE=98304
-option FALLBACK_SIZE=131072
+#option CONFIG_FALLBACK_SIZE=524288
+#option CONFIG_FALLBACK_SIZE=98304
+option CONFIG_FALLBACK_SIZE=131072
 
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-option ROM_IMAGE_SIZE=65536
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+option CONFIG_ROM_IMAGE_SIZE=65536
  
 
 ###
@@ -77,7 +77,7 @@ option ROM_IMAGE_SIZE=65536
 #option CONFIG_COMPRESS=1
 
 option CONFIG_CONSOLE_SERIAL8250=1
-option TTYS0_BAUD=115200
+option CONFIG_TTYS0_BAUD=115200
 
 ##
 ### Select the coreboot loglevel
@@ -89,30 +89,30 @@ option TTYS0_BAUD=115200
 ## WARNING    5   warning conditions
 ## NOTICE     6   normal but significant condition
 ## INFO       7   informational
-## DEBUG      8   debug-level messages
+## CONFIG_DEBUG      8   debug-level messages
 ## SPEW       9   Way too many details
 
 ## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=7
+option CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
 ## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=7
+option CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=7
 
-#option DEBUG=1
+#option CONFIG_DEBUG=1
 
 #
 
 ## Coreboot C code runs at this location in RAM
-option _RAMBASE=0x004000
+option CONFIG_RAMBASE=0x004000
 
 ##
 ## Use a 32K stack
 ##
-option STACK_SIZE=0x8000 
+option CONFIG_STACK_SIZE=0x8000 
 
 ##
 ## Use a 56K heap
 ##
-option HEAP_SIZE=0xe000
+option CONFIG_HEAP_SIZE=0xe000
 
 #
 ###
@@ -125,22 +125,22 @@ option CONFIG_ROM_PAYLOAD     = 1
 # 
 romimage "normal"
 #	48K for SCSI FW
-#        option ROM_SIZE = 512*1024-48*1024
+#        option CONFIG_ROM_SIZE = 512*1024-48*1024
 #	48K for SCSI FW and 48K for ATI ROM
-#	option ROM_SIZE = 512*1024-48*1024-48*1024
+#	option CONFIG_ROM_SIZE = 512*1024-48*1024-48*1024
         option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
-	option USE_FALLBACK_IMAGE=0
-	option ROM_SECTION_SIZE  = (ROM_SIZE - FALLBACK_SIZE)
-	option ROM_SECTION_OFFSET= 0
+	option CONFIG_USE_FALLBACK_IMAGE=0
+	option CONFIG_ROM_SECTION_SIZE  = (CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE)
+	option CONFIG_ROM_SECTION_OFFSET= 0
 
-	option PAYLOAD_SIZE            = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
-	option CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-	option _ROMBASE      = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE)
+	option CONFIG_PAYLOAD_SIZE            = (CONFIG_ROM_SECTION_SIZE - CONFIG_ROM_IMAGE_SIZE)
+	option CONFIG_ROM_PAYLOAD_START = (0xffffffff - CONFIG_ROM_SIZE + CONFIG_ROM_SECTION_OFFSET + 1)
+	option CONFIG_ROMBASE      = (CONFIG_ROM_PAYLOAD_START + CONFIG_PAYLOAD_SIZE)
 
-#	option XIP_ROM_SIZE = FALLBACK_SIZE
-        option XIP_ROM_SIZE = 65536
+#	option CONFIG_XIP_ROM_SIZE = CONFIG_FALLBACK_SIZE
+        option CONFIG_XIP_ROM_SIZE = 65536
 
-	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+	option CONFIG_XIP_ROM_BASE = (CONFIG_ROMBASE + CONFIG_ROM_IMAGE_SIZE - CONFIG_XIP_ROM_SIZE)
 
 	payload /usr/src/filo-0.4.1_btext/filo.elf
 #	payload /usr/src/filo-0.4.2/filo.elf
@@ -148,20 +148,20 @@ end
 
 romimage "fallback" 
 	option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
-	option USE_FALLBACK_IMAGE=1
-	option ROM_SECTION_SIZE  = FALLBACK_SIZE
-	option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
+	option CONFIG_USE_FALLBACK_IMAGE=1
+	option CONFIG_ROM_SECTION_SIZE  = CONFIG_FALLBACK_SIZE
+	option CONFIG_ROM_SECTION_OFFSET= (CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE)
 
-	option PAYLOAD_SIZE            = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
-	option CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-	option _ROMBASE      = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE)
+	option CONFIG_PAYLOAD_SIZE            = (CONFIG_ROM_SECTION_SIZE - CONFIG_ROM_IMAGE_SIZE)
+	option CONFIG_ROM_PAYLOAD_START = (0xffffffff - CONFIG_ROM_SIZE + CONFIG_ROM_SECTION_OFFSET + 1)
+	option CONFIG_ROMBASE      = (CONFIG_ROM_PAYLOAD_START + CONFIG_PAYLOAD_SIZE)
 
-#	option XIP_ROM_SIZE = FALLBACK_SIZE
-	option XIP_ROM_SIZE = 65536
-	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+#	option CONFIG_XIP_ROM_SIZE = CONFIG_FALLBACK_SIZE
+	option CONFIG_XIP_ROM_SIZE = 65536
+	option CONFIG_XIP_ROM_BASE = (CONFIG_ROMBASE + CONFIG_ROM_IMAGE_SIZE - CONFIG_XIP_ROM_SIZE)
 
 	payload ../../../payloads/filo.elf
 #	payload /usr/src/filo-0.4.2/filo.elf
 end
 
-buildrom ./coreboot.rom ROM_SIZE "normal" "fallback"
+buildrom ./coreboot.rom CONFIG_ROM_SIZE "normal" "fallback"