rename Iwill to iwill to keep naming scheme consistent

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2467 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 0 insertions, 167 deletions

diff --git a/targets/Iwill/dk8s2/Config.lb b/targets/Iwill/dk8s2/Config.lb
deleted file mode 100644
index 64419756e4..0000000000
--- a/targets/Iwill/dk8s2/Config.lb
+++ /dev/null
@@ -1,167 +0,0 @@
-# Sample config file for 
-# the Iwill DK8S2
-# This will make a target directory of ./dk8s2
-
-target dk8s2
-
-mainboard Iwill/DK8S2
-
-option HAVE_HARD_RESET=1
-
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
-option ROM_SIZE=1024*1024
-
-option HAVE_FALLBACK_BOOT=1
-  
-#option CONFIG_LSI_SCSI_FW_FIXUP=1
-
-
-#
-###
-### Build code to export a programmable irq routing table
-###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=12
-#
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-option CONFIG_SMP=1
-option CONFIG_MAX_CPUS=2
-#option CONFIG_LOGICAL_CPUS=2
-option CONFIG_MAX_PHYSICAL_CPUS=2
-#
-###
-### Build code to setup a generic IOAPIC
-###
-option CONFIG_IOAPIC=1
-#
-###
-### MEMORY_HOLE instructs earlymtrr.inc to
-### enable caching from 0-640KB and to disable 
-### caching from 640KB-1MB using fixed MTRRs 
-###
-### Enabling this option breaks SMP because secondary
-### CPU identification depends on only variable MTRRs
-### being enabled.
-###
-#option MEMORY_HOLE=0
-#
-###
-### Clean up the motherboard id strings
-###
-option MAINBOARD_PART_NUMBER="DK8S2"
-option MAINBOARD_VENDOR="Iwill"
-#
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-#option FALLBACK_SIZE=524288
-#option FALLBACK_SIZE=98304
-option FALLBACK_SIZE=131072
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-option ROM_IMAGE_SIZE=65536
- 
-
-###
-### Compute where this copy of linuxBIOS will start in the boot rom
-###
-#
-###
-
-## We do use compressed image
-#option CONFIG_COMPRESS=1
-
-option CONFIG_CONSOLE_SERIAL8250=1
-option TTYS0_BAUD=115200
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG      1   system is unusable
-## ALERT      2   action must be taken immediately
-## CRIT       3   critical conditions
-## ERR        4   error conditions
-## WARNING    5   warning conditions
-## NOTICE     6   normal but significant condition
-## INFO       7   informational
-## DEBUG      8   debug-level messages
-## SPEW       9   Way too many details
-
-## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=7
-## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=7
-
-#option DEBUG=1
-
-#
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x004000
-
-##
-## Use a 32K stack
-##
-option STACK_SIZE=0x8000 
-
-##
-## Use a 56K heap
-##
-option HEAP_SIZE=0xe000
-
-#
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-option CONFIG_ROM_STREAM     = 1
-
-#
-# 
-romimage "normal"
-#	48K for SCSI FW
-#        option ROM_SIZE = 512*1024-48*1024
-#	48K for SCSI FW and 48K for ATI ROM
-#	option ROM_SIZE = 512*1024-48*1024-48*1024
-        option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
-	option USE_FALLBACK_IMAGE=0
-	option ROM_SECTION_SIZE  = (ROM_SIZE - FALLBACK_SIZE)
-	option ROM_SECTION_OFFSET= 0
-
-	option PAYLOAD_SIZE            = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
-	option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-	option _ROMBASE      = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-#	option XIP_ROM_SIZE = FALLBACK_SIZE
-        option XIP_ROM_SIZE = 65536
-
-	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
-	payload /usr/src/filo-0.4.1_btext/filo.elf
-#	payload /usr/src/filo-0.4.2/filo.elf
-end
-
-romimage "fallback" 
-	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
-	option USE_FALLBACK_IMAGE=1
-	option ROM_SECTION_SIZE  = FALLBACK_SIZE
-	option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-
-	option PAYLOAD_SIZE            = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
-	option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-	option _ROMBASE      = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-#	option XIP_ROM_SIZE = FALLBACK_SIZE
-	option XIP_ROM_SIZE = 65536
-	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
-	payload ../../../payloads/filo.elf
-#	payload /usr/src/filo-0.4.2/filo.elf
-end
-
-buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"