mb/kontron: Get rid of device_t

Use of device_t has been abandoned in ramstage.

Change-Id: Iac341f592acd777fe9ba22cfbca19d4cbdb4916e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

5 files changed, 8 insertions, 8 deletions

diff --git a/src/mainboard/kontron/986lcd-m/mainboard.c b/src/mainboard/kontron/986lcd-m/mainboard.c
index d729533792..cc32b998ec 100644
--- a/src/mainboard/kontron/986lcd-m/mainboard.c
+++ b/src/mainboard/kontron/986lcd-m/mainboard.c
@@ -151,7 +151,7 @@ static void hwm_setup(void)
 /* mainboard_enable is executed as first thing after */
 /* enumerate_buses(). */
 
-static void mainboard_enable(device_t dev)
+static void mainboard_enable(struct device *dev)
 {
 	install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 3);
 	hwm_setup();
diff --git a/src/mainboard/kontron/kt690/get_bus_conf.c b/src/mainboard/kontron/kt690/get_bus_conf.c
index dc6833a05f..b1b7270802 100644
--- a/src/mainboard/kontron/kt690/get_bus_conf.c
+++ b/src/mainboard/kontron/kt690/get_bus_conf.c
@@ -57,7 +57,7 @@ static u32 get_bus_conf_done = 0;
 void get_bus_conf(void)
 {
 	u32 apicid_base;
-	device_t dev;
+	struct device *dev;
 	int i;
 
 	if (get_bus_conf_done == 1)
diff --git a/src/mainboard/kontron/kt690/mainboard.c b/src/mainboard/kontron/kt690/mainboard.c
index f01e5217f0..de6c0bb5c9 100644
--- a/src/mainboard/kontron/kt690/mainboard.c
+++ b/src/mainboard/kontron/kt690/mainboard.c
@@ -115,7 +115,7 @@ static void set_thermal_config(void)
 {
 	u8 byte;
 	u16 word;
-	device_t sm_dev;
+	struct device *sm_dev;
 
 	/* set ADT 7461 */
 	ADT7461_write_byte(0x0B, 0x50);	/* Local Temperature Hight limit */
@@ -176,7 +176,7 @@ static void set_thermal_config(void)
 * enable the dedicated function in dbm690t board.
 * This function called early than rs690_enable.
 *************************************************/
-static void mainboard_enable(device_t dev)
+static void mainboard_enable(struct device *dev)
 {
 	printk(BIOS_INFO, "Mainboard KT690 Enable. dev=0x%p\n", dev);
 
diff --git a/src/mainboard/kontron/kt690/mptable.c b/src/mainboard/kontron/kt690/mptable.c
index 8895163651..9515931627 100644
--- a/src/mainboard/kontron/kt690/mptable.c
+++ b/src/mainboard/kontron/kt690/mptable.c
@@ -46,7 +46,7 @@ static void *smp_write_config_table(void *v)
 
 	/* I/O APICs:   APIC ID Version State   Address */
 	{
-		device_t dev;
+		struct device *dev;
 		u32 dword;
 		u8 byte;
 
diff --git a/src/mainboard/kontron/ktqm77/mainboard.c b/src/mainboard/kontron/ktqm77/mainboard.c
index 5a697f05d2..3a3729038d 100644
--- a/src/mainboard/kontron/ktqm77/mainboard.c
+++ b/src/mainboard/kontron/ktqm77/mainboard.c
@@ -162,7 +162,7 @@ static int int15_handler(void)
 /* mainboard_enable is executed as first thing after */
 /* enumerate_buses(). */
 
-static void mainboard_enable(device_t dev)
+static void mainboard_enable(struct device *dev)
 {
 #if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_YABEL) || \
 	IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE)
@@ -172,7 +172,7 @@ static void mainboard_enable(device_t dev)
 
 	unsigned disable = 0;
 	if ((get_option(&disable, "ethernet1") == CB_SUCCESS) && disable) {
-		device_t nic = dev_find_slot(0, PCI_DEVFN(0x1c, 2));
+		struct device *nic = dev_find_slot(0, PCI_DEVFN(0x1c, 2));
 		if (nic) {
 			printk(BIOS_DEBUG, "DISABLE FIRST NIC!\n");
 			nic->enabled = 0;
@@ -180,7 +180,7 @@ static void mainboard_enable(device_t dev)
 	}
 	disable = 0;
 	if ((get_option(&disable, "ethernet2") == CB_SUCCESS) && disable) {
-		device_t nic = dev_find_slot(0, PCI_DEVFN(0x1c, 3));
+		struct device *nic = dev_find_slot(0, PCI_DEVFN(0x1c, 3));
 		if (nic) {
 			printk(BIOS_DEBUG, "DISABLE SECOND NIC!\n");
 			nic->enabled = 0;